WorldWideScience

Sample records for sanitation honor roll

  1. Honors

    Science.gov (United States)

    2012-05-01

    A number of AGU members were honored during the European Geosciences Union's (EGU) General Assembly, held on 22-27 April in Vienna. EGU Union awards were presented to the following people: Vincent Courtillot, University of Paris Diderot, France, received the 2012 Arthur Holmes Medal and EGU honorary membership for seminal contributions to geomagnetism and the geodynamics of mantle hot spots. Michael Ghil, University of California, Los Angeles, and École Normale Supérieure, France, received the 2012 Alfred Wegener Medal and EGU honorary membership for his leading contributions to theoretical climate dynamics; his innovative observational studies involving model assimilation of satellite data in meteorology, oceanography, and space physics; the breadth of his interdisciplinary studies, including macroeconomics; and his extensive supervision and mentoring of scores of graduate and postdoctoral students. Robin Clarke, Universidade Federal do Rio Grande do Sul, Brazil, received the 2012 Alexander von Humboldt Medal for fundamental contributions in statistical analysis and modeling of hydrological processes. Angioletta Coradini, Istituto Nazionale di Astrofsica, Italy, received the 2012 Jean Dominique Cassini Medal and EGU honorary membership in recognition of her important and wide range of work in planetary sciences and solar system formation and for her leading role in the development of space infrared instrumentation for planetary exploration.

  2. Honors

    Science.gov (United States)

    2011-10-01

    More than a dozen AGU members are among 94 researchers announced by U.S. president Barack Obama on 26 September as recipients of the Presidential Early Career Award for Scientists and Engineers. The award, which is coordinated by the Office of Science and Technology Policy within the Executive Office of the President, is considered the highest honor bestowed by the U.S. government on science and engineering professionals in the early stages of their independent research careers. This year's recipients include Jeffrey Book, Naval Research Laboratory; Jonathan Cirtain, NASA Marshall Space Flight Center; Fotini Katopodes Chow, University of California, Berkeley; Elizabeth Cochran, U.S. Geological Survey (USGS); Ian Howat, Ohio State University; Christiane Jablonowski, University of Michigan; Justin Kasper, Smithsonian Astrophysical Observatory; Elena Litchman, Michigan State University; James A. Morris Jr., National Oceanic and Atmospheric Administration (NOAA); Erin M. Oleson, NOAA; Victoria Orphan, California Institute of Technology; Sasha Reed, USGS; David Shelly, USGS; and Feng Wang, University of California, Berkeley. Five AGU members are among 10 U.S. representatives recently selected for International Arctic Science Committee working groups. The AGU members, chosen as representatives through the U.S. National Academies review process, are Atmosphere Working Group member James Overland, Pacific Marine Environmental Laboratory, NOAA; Cryosphere Working Group members Walter Meier, University of Colorado at Boulder, and Elizabeth Hunke, Los Alamos National Laboratory; Marine Working Group member Mary-Louise Timmermans, Yale University; and Terrestrial Working Group member Vanessa Lougheed, University of Texas at El Paso.

  3. Honors

    Science.gov (United States)

    Anonymous

    2012-05-01

    A number of AGU members were honored during the European Geosciences Union's (EGU) General Assembly, held on 22-27 April in Vienna. EGU Union awards were presented to the following people: Vincent Courtillot, University of Paris Diderot, France, received the 2012 Arthur Holmes Medal and EGU honorary membership for seminal contributions to geomagnetism and the geodynamics of mantle hot spots.Michael Ghil, University of California, Los Angeles, and École Normale Supérieure, France, received the 2012 Alfred Wegener Medal and EGU honorary membership for his leading contributions to theoretical climate dynamics; his innovative observational studies involving model assimilation of satellite data in meteorology, oceanography, and space physics; the breadth of his interdisciplinary studies, including macroeconomics; and his extensive supervision and mentoring of scores of graduate and postdoctoral students. Robin Clarke, Universidade Federal do Rio Grande do Sul, Brazil, received the 2012 Alexander von Humboldt Medal for fundamental contributions in statistical analysis and modeling of hydrological processes.Angioletta Coradini, Istituto Nazionale di Astrofsica, Italy, received the 2012 Jean Dominique Cassini Medal and EGU honorary membership in recognition of her important and wide range of work in planetary sciences and solar system formation and for her leading role in the development of space infrared instrumentation for planetary exploration.

  4. Honor Role

    Science.gov (United States)

    Good, Howard

    2004-01-01

    In this article, the author talks about "honor" and describes how the word has been taken for granted in schools. He explains that "honor" traditionally, has had two meanings, and that the National Honor Society (NHS) reflects the most ancient of them. Like Aristotle, who described honor in his "Nicomachean Ethics" as "the prize of virtue and the…

  5. Housing Honors. National Collegiate Honors Council Monograph Series

    Science.gov (United States)

    Frost, Linda, Ed.; Kay, Lisa W., Ed.; Poe, Rachael, Ed.

    2015-01-01

    Honors administrators spend much of their time explaining and describing what honors is and does. When they talk about what honors looks like nationally, they should have answers to the following important questions: How pervasive is the model of separate honors facilities?; How pervasive are the legendary closets that honors programs have so…

  6. Honors Education and Global Citizenship

    Science.gov (United States)

    Wolfensberger, Marca V. C.

    2012-01-01

    An issue of "Journal of the National Collegiate Honors Council" devoted to "Honors Around the Globe" is an important opportunity to consider the role of honors in creating international awareness and understanding. Honors faculty and administrators have become increasingly active in global cross-communication through, for…

  7. Honored Teacher Shows Commitment.

    Science.gov (United States)

    Ratte, Kathy

    1987-01-01

    Part of the acceptance speech of the 1985 National Council for the Social Studies Teacher of the Year, this article describes the censorship experience of this honored social studies teacher. The incident involved the showing of a videotape version of the feature film entitled "The Seduction of Joe Tynan." (JDH)

  8. Mothers in Honors

    Science.gov (United States)

    Killinger, Mimi; Binder-Hathaway, Rachel; Mitchell, Paige; Patrick, Emily

    2013-01-01

    This article describes the experiences of four honors mothers as they offer sage advice. They argue convincingly that they are motivated, focused students who bring rich diversity to college programs. They further report disturbing marginalization and isolation that could be ameliorated with support and increased sensitivity on the part of…

  9. Cicero, Retrieving the Honorable

    Directory of Open Access Journals (Sweden)

    William A. Frank

    2014-06-01

    Full Text Available From Marcus Tullius Cicero’s philosophical writings, the author first draws out a modest network of ideas that informs his understanding of what it means to be a good man (vir bonus. Then, he finds in Cicero the idea of a befitting mutuality among four distinctively human capacities: a faculty for inquiry into and love for truth manifest in words and actions (reason; a disposition for the recognition of and attraction to things of worth beyond self-interest (the honorable; an acute sense of one own spheres of responsibility along with facility for speaking and acting appropriately within them (appropriate action, and fostering and extending the bonds of mutual personal relations grounded in justice and benevolence (society. Against the background of deep commitments in modernity to hedonism and autonomous individualism, the author proposes a retrieval of the virtue of the honorable as an attractive alternative.

  10. Honoring our Nation's Veterans

    Directory of Open Access Journals (Sweden)

    Robbins RA

    2015-11-01

    Full Text Available No abstract available. Article truncated at 150 words. Today is Armistice Day, renamed Veterans Day in 1954, to honor our Nation's Veterans. In Washington the rhetoric from both the political right and left supports our Veterans. My cynical side reminds me that this might have something to do with Veterans voting in a higher percentage than the population as a whole, but let me give the politicians this one. Serving our Country in the military is something that deserves to be honored. I was proud to serve our Veterans over 30 years at the four Department of Veterans Affairs (VA hospitals. However, the VA has had a very bad year. First, in Washington there were the resignations of the Secretary of Veterans Affairs, Eric Shinseki; the undersecretary for the Veterans Health Administration, Robert Petzel; and the undersecretary for the Veterans Benefits Administration, Allison Hickey. Locally, in the light of the VA wait scandal there were the firing of ...

  11. Warehouse Sanitation Workshop Handbook.

    Science.gov (United States)

    Food and Drug Administration (DHHS/PHS), Washington, DC.

    This workshop handbook contains information and reference materials on proper food warehouse sanitation. The materials have been used at Food and Drug Administration (FDA) food warehouse sanitation workshops, and are selected by the FDA for use by food warehouse operators and for training warehouse sanitation employees. The handbook is divided…

  12. Sanitation investments in Ghana

    DEFF Research Database (Denmark)

    Awunyo-Akaba, Y.; Awunyo-Akaba, J.; Gyapong, M.

    2016-01-01

    with people’s willingness and ability to invest in household sanitation across all communities. The status of being a stranger i.e. migrant in the area left some populations without rights over the land they occupied and with low incentives to invest in sanitation, while indigenous communities were challenged......Background: Ghana’s low investment in household sanitation is evident from the low rates of improved sanitation. This study analysed how land ownership, tenancy security and livelihood patterns are related to sanitation investments in three adjacent rural and peri-urban communities in a district...... communities were triangulated with multiple interview material and contextual knowledge on social structures, history of settlement, land use, livelihoods, and access to and perceptions about sanitation. Results: This study shows that the history of settlement and land ownership issues are highly correlated...

  13. Guide to ship sanitation

    National Research Council Canada - National Science Library

    2011-01-01

    "The third edition of the Guide to Ship Sanitation presents the public health significance of ships in terms of disease and highlights the importance of applying appropriate control measures"--Back cover...

  14. Marine Sanitation Devices (MSDs)

    Science.gov (United States)

    Marine sanitation devices treat or retain sewage from vessels, and have performance standards set by the EPA. This page provides information on MSDs, including who must use an MSD, states' roles, types of MSDs and standards.

  15. Sanitation without pollution.

    Science.gov (United States)

    Winblad, U

    2000-01-01

    The most effective way of protecting drinking water resources from domestic sewage is to use technologies that do not produce sewage. This paper gives an overview of emerging alternatives in the form of ecological sanitation systems for urban and peri-urban areas. A key feature of ecological sanitation is that it regards human excreta as a resource to be recycled rather than as waste to be disposed of. Examples given include ecological sanitation systems based on dehydration and decomposition from Mexico, El Salvador, Sweden, India and Vietnam. These systems need neither water for flushing, nor pipelines for transport, nor treatment plants and arrangements for the disposal of toxic sludge. Large scale application of ecological sanitation would lead to less environmental pollution, reduced water consumption, considerable savings on sewers and treatment plants and increased employment. In addition it would provide valuable resources for food production and wasteland development.

  16. Kulturens rolle

    DEFF Research Database (Denmark)

    Hasse, Cathrine

    2007-01-01

    Kulturens rolle. Herunder kulturens betydning for psykologisk teori og forskning set i lyset af den stigende globalisering og væksten i kulturmøder. Der gives eksempler fra hverdagssituationer, den pædagogiske praksis, fra indvandrerforskning, turister men også fra avisernes referater af kulturmø......Kulturens rolle. Herunder kulturens betydning for psykologisk teori og forskning set i lyset af den stigende globalisering og væksten i kulturmøder. Der gives eksempler fra hverdagssituationer, den pædagogiske praksis, fra indvandrerforskning, turister men også fra avisernes referater af...

  17. Culture, Masculine Honor, and Violence Toward Women.

    Science.gov (United States)

    Brown, Ryan P; Baughman, Kiersten; Carvallo, Mauricio

    2018-04-01

    Prior research has connected the cultural ideology of honor to intrasexual violence between men and to attitudes supporting intersexual aggression in response to perceived honor violations by female romantic partners. We extend this research to show that honor ideology is also associated with an increased likelihood of men actually engaging in violent and sexually coercive behaviors toward women. Extending previous research on honor-based schemas and scripts linked to relationship violence, comparisons between honor states and non-honor states in the United States show that official rape and domestic homicide rates by White male perpetrators (Study 1) and experiences of rape and violence in relationships anonymously reported by White female teenagers (Study 2) were higher in honor states, controlling for a variety of potential confounds. These results extend prior laboratory research on honor-based schemas and scripts into the realm of extreme, real-world behaviors.

  18. Inking and Thinking: Honors Students and Tattoos

    Science.gov (United States)

    Dundes, Lauren; Francis, Antonia

    2016-01-01

    This study examines whether academically accelerated students in a college Honors program are as likely as other students to acquire a tattoo and to spend the same amount of time contemplating this decision. A convenience sample of 71 honors students and 135 non-honors students completed a survey at a small mid-Atlantic liberal arts college in…

  19. Sanitation planning in developing countries

    OpenAIRE

    Kerstens, S.M.

    2016-01-01

    Sanitation planning in developing countries: Added value of resource recovery Worldwide 2.5 billion people lack access to sanitation. This impacts human live, the environment and represents a loss of valuable resources that can be regained from wastewater. This study shows that resource recovery can be a potential driver to accelerate sanitation. A new sanitation decision framework for policy makers was created and tested in Indonesia. The variety of advantages and disadvantages of sanitatio...

  20. Acceptance of new sanitation

    NARCIS (Netherlands)

    Poortvliet, P.M.; Sanders, Liese; Weijma, Jan; Vries, De Jasper R.

    2018-01-01

    Current sanitation systems are inherently limited in their ability to address the new challenges for (waste)water management that arise from the rising demand to restore resource cycles. These challenges include removal of micropollutants, water (re)use, and nutrient recovery. New opportunities

  1. Sense and Sanitation

    NARCIS (Netherlands)

    Vliet, van B.J.M.; Spaargaren, G.

    2010-01-01

    Historically, sanitation infrastructures have been designed to do away with sensory experiences. As in the present phase of modernity the senses are assigned a crucial role in the perception of risks, a paradigm shift has emerged in the infrastructural provision of energy, water and waste services.

  2. Sanitation and Civic Participation

    Directory of Open Access Journals (Sweden)

    José Antonio Peña Barreto

    2016-08-01

    Full Text Available This research is proposed in order to propose an action plan for environmental sanitation citizen participation in the "Manuela Sáenz" Concentrating National Basic School Parish Municipality City Bolivia Pedraza Barinas state. It is part of the qualitative approach in the form of participatory action research and supported by a narrative descriptive design. The selected scenario for performance of work was the Concentrating National School "Manuela Sáenz" key informants consist of 1 member of the community, 1 member of the community council and one teacher of the institution. The techniques used are observation and depth interview, using as instruments a field notebook and an interview script. For the presentation and analysis of results he was categorized, triangulated and theorized the information obtained, performing a thorough and detailed report on the integrated management of solid waste diagnosis. Subsequently, the proposal called Action Plan for environmental sanitation was developed with citizen participation in concentrated Manuela Saenz National Basic School. Then the proposal where participants expressed the view that activities allowed to obtain very important basic knowledge on environmental sanitation was run.

  3. A different kind of honor culture : Family honor and aggression in Turks

    NARCIS (Netherlands)

    van Osch, Y.M.J.; Breugelmans, S.M.; Zeelenberg, M.; Bölük, P.

    2013-01-01

    Masculine honor has been found to explain the relationship between insults and aggression in the USA. However, detailed accounts of Mediterranean honor cultures suggest that family honor may be more important in explaining cross-cultural differences in aggression. Two studies revealed that people

  4. A different kind of honor culture : Family honor and aggression in Turks

    NARCIS (Netherlands)

    van Osch, Yvette; Breugelmans, Seger M.; Zeelenberg, Marcel; Bölük, Pinar

    Masculine honor has been found to explain the relationship between insults and aggression in the USA. However, detailed accounts of Mediterranean honor cultures suggest that family honor may be more important in explaining cross-cultural differences in aggression. Two studies revealed that people

  5. Honor and I: Differential relationships between honor and self-esteem in three cultural groups

    NARCIS (Netherlands)

    Novin, S.; Tatar, B.; Krabbendam, L.

    2015-01-01

    Honor is often defined as one's self-esteem through one's own eyes as through the eyes of others. This definition assumes that endorsing honor values is universally related to one's self-esteem. Yet, prior work shows that the salience of honor in individuals' lives differs across cultures, which

  6. The Honors Thesis: A Handbook for Honors Directors, Deans, and Faculty Advisors. National Collegiate Honors Council Monograph Series

    Science.gov (United States)

    Anderson, Mark; Lyons, Karen; Weiner, Norman

    2014-01-01

    This handbook is intended to help all those who design, administer, and implement honors thesis programs--honors directors, deans, staff, faculty, and advisors--evaluate their thesis programs, solve pressing problems, select more effective requirements or procedures, or introduce an entirely new thesis program. The authors' goal is to provide…

  7. Honors

    Science.gov (United States)

    2012-02-01

    Marshall Shepherd, professor of geography in the University of Georgia's Franklin College of Arts and Sciences, Athens, began a 1-year term as president-elect of the American Meteorological Society (AMS) on 22 January. In 2013 he will assume the presidency of the society. Also, five AGU members recently were elected as AMS councilors, with terms expiring in 2015: José Fuentes, Department of Meteorology, Pennsylvania State University, University Park; Richard Johnson, Atmospheric Science Department, Colorado State University, Fort Collins; Christa Peters-Lidard, Hydrological Sciences Branch at NASA's Goddard Space Flight Center, Greenbelt, Md.; Wassila Thiaw, Climate Prediction Center, National Oceanic and Atmospheric Administration, Camp Springs, Md.; and Chidong Zhang, Rosenstiel School of Marine and Atmospheric Science, University of Miami, Miami, Fla.

  8. Toward a Science of Honors Education

    Science.gov (United States)

    Jones, Beata M.

    2016-01-01

    In this article, Beata Jones attempts to organize the honors discipline into a comprehensive framework that can guide explorations and shed light on specific attributes of honors entities in the framework of their interrelationships. The framework offers an approach to deal with the inherent fragmentation of the field, which can lead to…

  9. The Fessenden Honors in Engineering Program

    Science.gov (United States)

    Giazzoni, Michael

    2018-01-01

    Developing honors opportunities for students in engineering programs can be difficult, and the experience at the University of Pittsburgh is no exception. Often these students' degree requirements are so demanding that their opportunities for participating in honors experiences are severely limited. In each of the two semesters of their freshman…

  10. Medal of Honor Recipients: 1979-2004

    National Research Council Canada - National Science Library

    Richardson, Glenda

    2004-01-01

    .... Although the Persian Gulf War, Operation Enduring Freedom, and Operation Iraqi Freedom are listed in the Table of Contents, as of this writing, no Medals of Honor have been awarded for actions in these conflicts. For further information, see CRS Report 95-519, "Medal of Honor: History and Issues." This report will be updated as new recipients are named.

  11. Honoring Teachers for Their Vocation and Potential

    Science.gov (United States)

    Williams, Raymond Brady

    2007-01-01

    One goal of the Wabash Center is to honor teachers for their potential, and hospitality has been a primary means to that end. A lesson learned is that the intention and effort to honor teachers create contexts for meaningful discussions, creative learning, and personal renewal of those engaged in workshops and consultations. The lesson is valuable…

  12. Honor crimes: review and proposed definition

    NARCIS (Netherlands)

    Elakkary, S.; Franke, B.; Shokri, D.; Hartwig, S.; Tsokos, M.; Puschel, K.

    2014-01-01

    There is every reason to believe that honor based violence is one of the forms of domestic violence that is being practiced against females all over the world. This type of violence includes a wide range of crimes, the severest of which is honor killing. Many studies have adopted different

  13. Honors in Honduras: Engaged Learning in Action

    Science.gov (United States)

    Folds-Bennett, Trisha; Twomey, Mary Pat

    2013-01-01

    A significant challenge in honors education is providing experiences through which students deeply engage ideas and content so that their analytical abilities and core beliefs and values are transformed. The College of Charleston Honors College aimed to stimulate critical thinking and examination of core values through a more holistic approach to…

  14. Teaching for excellence: honors pedagogies revealed

    NARCIS (Netherlands)

    Wolfensberger, M.V.C.

    2012-01-01

    What are characteristics of honors pedagogies in higher education? What are the teaching strategies that are particularly relevant and successful for academically gifted and motivated students? In spite of the substantial body of literature about the practice of honors education, very little

  15. Cultural prototypes and dimensions of honor.

    Science.gov (United States)

    Cross, Susan E; Uskul, Ayse K; Gerçek-Swing, Berna; Sunbay, Zeynep; Alözkan, Cansu; Günsoy, Ceren; Ataca, Bilge; Karakitapoglu-Aygün, Zahide

    2014-02-01

    Research evidence and theoretical accounts of honor point to differing definitions of the construct in differing cultural contexts. The current studies address the question "What is honor?" using a prototype approach in Turkey and the Northern United States. Studies 1a/1b revealed substantial differences in the specific features generated by members of the two groups, but Studies 2 and 3 revealed cultural similarities in the underlying dimensions of self-respect, moral behavior, and social status/respect. Ratings of the centrality and personal importance of these factors were similar across the two groups, but their association with other relevant constructs differed. The tripartite nature of honor uncovered in these studies helps observers and researchers alike understand how diverse responses to situations can be attributed to honor. Inclusion of a prototype analysis into the literature on honor cultures can provide enhanced coverage of the concept that may lead to testable hypotheses and new theoretical developments.

  16. School violence and the culture of honor.

    Science.gov (United States)

    Brown, Ryan P; Osterman, Lindsey L; Barnes, Collin D

    2009-11-01

    We investigated the hypothesis that a sociocultural variable known as the culture of honor would be uniquely predictive of school-violence indicators. Controlling for demographic characteristics associated in previous studies with violent crime among adults, we found that high-school students in culture-of-honor states were significantly more likely than high-school students in non-culture-of-honor states to report having brought a weapon to school in the past month. Using data aggregated over a 20-year period, we also found that culture-of-honor states had more than twice as many school shootings per capita as non-culture-of-honor states. The data revealed important differences between school violence and general patterns of homicide and are consistent with the view that many acts of school violence reflect retaliatory aggression springing from intensely experienced social-identity threats.

  17. Sanitizers and Disinfectants Guide. Revised

    Science.gov (United States)

    Healthy Schools Network, Inc., 2012

    2012-01-01

    Sanitizers and disinfectants can play an important role in protecting public health. They are designed to kill "pests," including infectious germs and other microorganisms such as bacteria, viruses, and fungi. Unfortunately, sanitizers and disinfectants also contain chemicals that are "pesticides." Exposure to persistent toxic…

  18. Sanitation planning in developing countries

    NARCIS (Netherlands)

    Kerstens, S.M.

    2016-01-01

    Sanitation planning in developing countries: Added value of resource recovery

    Worldwide 2.5 billion people lack access to sanitation. This impacts human live, the environment and represents a loss of valuable resources that can be regained from wastewater. This study

  19. AGU honored for Antarctic book

    Science.gov (United States)

    AGU has won an honorable mention award at the Fifteenth Annual Awards Program for Excellence in Professional and Scholarly Publishing sponsored by the Association of American Publishers for the book Volcanoes of the Antarctic Plate and Southern Oceans. The book is part of AGU's Antarctic Research Series, an outgrowth of research done during the International Geophysical Year that was begun in 1963 with a grant from the National Science Foundation. The award was presented at the AAP Annual Awards Dinner on February 6 at the Ritz-Carlton Hotel in Washington, D.C. The award consists of a medallion and a plate on which the names of the publisher, title, and authors are engraved.

  20. Consider Your Man Card Reissued: Masculine Honor and Gun Violence

    Science.gov (United States)

    Shuffelton, Amy

    2015-01-01

    In this article, Amy Shuffelton addresses school shootings through an investigation of honor and masculinity. Drawing on recent scholarship on honor, including Bernard Williams's "Shame and Necessity" and Kwame Anthony Appiah's "The Honor Code," Shuffelton points out that honor has been misconstrued as exclusively a matter of…

  1. Honoring Leslie A. Geddes - farewell ...

    Science.gov (United States)

    Valentinuzzi, Max E

    2010-01-05

    Honor thy father and thy mother, say the Holy Scriptures1, for they at least gave thee this biological life, but honor thy teachers, too, for they gave thee knowledge and example.Leslie Alexander Geddes took off on a long, long trip, Sunday October 25, 2009, leaving his body for medical and research use. The departing station was West Lafayette, Indiana, where he set foot in 1974, at Purdue University, stamping there a unique deep imprint, similar and probably more profound than the one left at Baylor College of Medicine (BCM), Houston, Texas, in the period 1955-1974. Memories came back as a flood the minute after a message broke the news to me: When I first met him visiting the Department of Physiology at BCM back in 1962, my first Classical Physiology with Modern Instrumentation Summer Course ... The versatile Physiograph was the main equipment, an electronic-mechanical three or four channel recorder that could pick up a variety of physiological variables. Les and his collaborators had introduced also the impedance pneumograph, which was a simplified version of previous developments made by others. It became a ubiquitous unit that trod many roads in the hands of eager and curious students. Ventricular fibrillation and especially its counterpart, defibrillation, stand out as subjects occupying his concern along the years. Many were the students recruited to such effort and long is the list of papers on the subject. Physiological signals attracted considerable part of his activities because one of his perennial mottos was measurement is essential in physiology. He has written thirteen books and over eight hundred scientific papers, receiving also several prizes and distinctions. Not only his interests stayed within the academic environment but an industrial hue was manifested in over 20 USA patents, all applied to medical use. History of science and technology was another area in which, often with Hebbel Hoff, he uncovered astounding and delightful information. It

  2. El Salvador - Water and Sanitation

    Data.gov (United States)

    Millennium Challenge Corporation — The benefits of the water and sanitation sub activity will be measured using a rigorous quasi-experimental impact evaluation methodology. An impact evaluation is a...

  3. 32 CFR 901.12 - Honor military and honor Naval schools-AFROTC and AFJROTC category.

    Science.gov (United States)

    2010-07-01

    ... for nomination in this category applies to the administrative authority of the school involved. (b... 32 National Defense 6 2010-07-01 2010-07-01 false Honor military and honor Naval schools-AFROTC...) DEPARTMENT OF THE AIR FORCE MILITARY TRAINING AND SCHOOLS APPOINTMENT TO THE UNITED STATES AIR FORCE ACADEMY...

  4. Academic success and early career outcomes : Can honors alumni be distinguished from non-honors alumni?

    NARCIS (Netherlands)

    Kool, A.; Mainhard, M. T.; Brekelmans, M.; van Beukelen, P.; Jaarsma, Alexandra

    2016-01-01

    This study compared Dutch alumni who previously participated in an honors program (n=72) to non-honors alumni who entered university as high-achieving high school students (n=72) with regard to (1) final university grade point average (GPA) and (2) early career outcomes. Final grades were drawn from

  5. Honors and Non-Honors Student Engagement: A Model of Student, Curricular, and Institutional Characteristics

    Science.gov (United States)

    Buckner, Ellen; Shores, Melanie; Sloane, Michael; Dantzler, John; Shields, Catherine; Shader, Karen; Newcomer, Bradley

    2016-01-01

    The purpose of this study was to apply several measures of learning and engagement to a comparable cohort of honors and non-honors students in order to generate a preliminary model of student engagement. Specific purposes were the following: (1) to determine the feasibility for use of several measures of student characteristics that may affect…

  6. Academic success and early career outcomes : Can honors alumni be distinguished from non-honors alumni?

    NARCIS (Netherlands)

    Kool, A.; Mainhard, M. T.; Jaarsma, A. D C; Brekelmans, M.; van Beukelen, P.

    2016-01-01

    This study compared Dutch alumni who previously participated in an honors program (n = 72) to non-honors alumni who entered university as high-achieving high school students (n = 72) with regard to (1) final university grade point average (GPA) and (2) early career outcomes. Final grades were drawn

  7. Honor Killing: Where Pride Defeats Reason.

    Science.gov (United States)

    Kanchan, Tanuj; Tandon, Abhishek; Krishan, Kewal

    2016-12-01

    Honor killings are graceless and ferocious murders by chauvinists with an antediluvian mind. These are categorized separately because these killings are committed for the prime reason of satisfying the ego of the people whom the victim trusts and always looks up to for support and protection. It is for this sole reason that honor killings demand strict and stern punishment, not only for the person who committed the murder but also for any person who contributed or was party to the act. A positive change can occur with stricter legislation and changes in the ethos of the society we live in today.

  8. Social Perspectives on the Sanitation Challenge

    NARCIS (Netherlands)

    Vliet, van B.J.M.; Spaargaren, G.; Oosterveer, P.J.M.

    2010-01-01

    In developed countries the sanitation challenge is to initiate a transition from strongly centralized, water-based infrastructure regimes towards more sustainable, source-separation oriented, sanitation regimes. This calls for social scientific research and demonstration on different levels and

  9. Shared sanitation: to include or to exclude?

    Science.gov (United States)

    Mara, Duncan

    2016-05-01

    Just over 600 million people used shared sanitation in 2015, but this form of sanitation is not considered 'improved sanitation' or, in the current terminology, 'basic sanitation' by WHO/UNICEF, principally because they are typically unhygienic. Recent research has shown that neighbour-shared toilets perform much better than large communal toilets. The successful development of community-designed, built and managed sanitation-and-water blocks in very poor urban areas in India should be adapted and adopted throughout urban slums in developing countries, with a caretaker employed to keep the facilities clean. Such shared sanitation should be classified as 'basic', sometimes as 'safely-managed', sanitation, so contributing to the achievement of the sanitation target of the Sustainable Development Goals. © The Author 2016. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  10. NREL's Earl Christensen Honored with Two Awards from National Biodiesel

    Science.gov (United States)

    Board | News | NREL NREL's Earl Christensen Honored with Two Awards from National Biodiesel Board NREL's Earl Christensen Honored with Two Awards from National Biodiesel Board February 16, 2018 Fuel stability research advances innovation and bolsters industry confidence in biodiesel. Scott

  11. The Study on Activation Strategy of Time-honored Brand

    Directory of Open Access Journals (Sweden)

    Mu Jiankang

    2017-01-01

    Full Text Available Time-honored brands have profound cultural heritage, a large part of glorious time-honored brands has gradually disappeared from the market. Brand activation is the core of management strategic of brand equity as well as the fundamental requirement of time-honored enterprise recovery. This paper constructs the time-honored brand purchase model and finds that consumers nostalgic psychology for the consumer’s perception and buying behavior has a positive effect.

  12. Rolling Shutter Motion Deblurring

    KAUST Repository

    Su, Shuochen

    2015-06-07

    Although motion blur and rolling shutter deformations are closely coupled artifacts in images taken with CMOS image sensors, the two phenomena have so far mostly been treated separately, with deblurring algorithms being unable to handle rolling shutter wobble, and rolling shutter algorithms being incapable of dealing with motion blur. We propose an approach that delivers sharp and undis torted output given a single rolling shutter motion blurred image. The key to achieving this is a global modeling of the camera motion trajectory, which enables each scanline of the image to be deblurred with the corresponding motion segment. We show the results of the proposed framework through experiments on synthetic and real data.

  13. 29 CFR 1926.27 - Sanitation.

    Science.gov (United States)

    2010-07-01

    ...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION General Safety and Health Provisions § 1926.27 Sanitation. Health and sanitation requirements for drinking water are contained in subpart D of this part. ... 29 Labor 8 2010-07-01 2010-07-01 false Sanitation. 1926.27 Section 1926.27 Labor Regulations...

  14. Blue Bahia: an environmental sanitation project

    International Nuclear Information System (INIS)

    Azcona, Miguel Angel L.; Neuvirth, Bruno

    1996-01-01

    The paper presents actions developed to incorporate some aspects of environmental sanitation to the basic sanitation project, natural resources assessing, identification of the environmental degradation sources - in addition to those caused by lack of basic sanitation, and common action between public and private sectors

  15. 29 CFR 1926.51 - Sanitation.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Sanitation. 1926.51 Section 1926.51 Labor Regulations... Sanitation. (a) Potable water. (1) An adequate supply of potable water shall be provided in all places of...; (iv) Combustion toilets. (4) The requirements of this paragraph (c) for sanitation facilities shall...

  16. 9 CFR 147.23 - Hatchery sanitation.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Hatchery sanitation. 147.23 Section... AGRICULTURE LIVESTOCK IMPROVEMENT AUXILIARY PROVISIONS ON NATIONAL POULTRY IMPROVEMENT PLAN Sanitation Procedures § 147.23 Hatchery sanitation. An effective program for the prevention and control of Salmonella...

  17. Costs and Benefits in the Economy of Honors

    Science.gov (United States)

    Badenhausen, Richard

    2012-01-01

    To be in honors is to be engaged in many different economic arrangements and exchanges. Honors educators work in concert with their admissions offices while recruiting high-achieving students whose decisions often hinge on how much money the institution can offer in the form of discounts to tuition and financial aid. Honors programs that tie…

  18. The role of honor concerns in emotional reactions to offences

    NARCIS (Netherlands)

    Rodriguez Mosquera, P.M.; Manstead, A.S.R.; Fischer, A.H.

    2002-01-01

    nvestigated the role of honor concerns in mediating the effect of nationality and gender on the reported intensity of anger and shame in reaction to insult vignettes. Spain, an honor culture, and The Netherlands, where honor is of less central significance, were selected for comparison. A total of

  19. Prioritizing Service to the Academically Talented: The Honors College

    Science.gov (United States)

    Floyd, Deborah L.; Holloway, Alexandria

    2006-01-01

    This chapter describes community college honors programs and courses, emphasizing in particular the Honors College at Miami Dade College in Florida. The chapter discusses pros and cons of honors programs and courses in the context of their appropriateness to the community college mission of open access and egalitarianism. (Contains 1 table.)

  20. Interdisciplinary Teaching of Theatre and Human Rights in Honors

    Science.gov (United States)

    Szasz, Maria

    2017-01-01

    Since spring 2012, the author has taught a 300-level Theatre and Human Rights class in the University of New Mexico Honors College. One of the centerpieces of honors education is careful research and thorough analysis of what is taught and why it is taught. In creating the honors class Theatre and Human Rights, the author explored how she would…

  1. The Effect of Honors Courses on Grade Point Averages

    Science.gov (United States)

    Spisak, Art L.; Squires, Suzanne Carter

    2016-01-01

    High-ability entering college students give three main reasons for not choosing to become part of honors programs and colleges; they and/or their parents believe that honors classes at the university level require more work than non-honors courses, are more stressful, and will adversely affect their self-image and grade point average (GPA) (Hill;…

  2. Honors pedagogy: tailoring learning preferences of honors and regular students for autonomy and structure

    NARCIS (Netherlands)

    Kingma, Tineke; Kamans, Elanor; Heijne, Marjolein; Wolfensberger, Marca; Jaarsma, Debbie

    2017-01-01

    Students differ in their learning preferences. When students are more intrinsically motivated this improves their well-being and involvement (Levesque, Zuehlke, Stanek, & Ryan, 2004). Teaching highly motivated honors students places different demands on teachers (Wolfensberger, 2012). High motivated

  3. Minorities and Women and Honors Education.

    Science.gov (United States)

    Harvey, Maria Luisa Alvarez

    1986-01-01

    Although honors education can be a key to the liberation of women and minorities, both groups continue to be underrepresented, perhaps because bright women and minority students are uncomfortable displaying their talents and adding pressure in an already stressful situation. (MSE)

  4. 2000 Honor List: A Hopeful Bunch.

    Science.gov (United States)

    Nilsen, Alleen Pace; Donelson, Ken; Blasingame, James, Jr.

    2001-01-01

    Presents 11 titles selected for the 2000 Honor List for young adult literature. Notes that the books were selected by combining their favorites with the best-book list compiled by the editors of such publications as "School Library Journal,""Booklist," and "Horn Book." (SG)

  5. Tailoring an Honors Program to Your Institution.

    Science.gov (United States)

    Terrill, Marty

    The first step in developing the honors program at North Arkansas Community College (NACC) involved establishing the following four program objectives: (1) to develop students' skills in critical thinking, research, and the application of knowledge; (2) to explore the historical, philosophical, and cultural backgrounds of disciplines; (3) to…

  6. History of Great Ideas: An Honors Seminar.

    Science.gov (United States)

    Terrill, Marty; And Others

    The History of Great Ideas is an interdisciplinary seminar course for sophomore honor students at North Arkansas Community Technical College that teaches the intellectual history of western civilization. Each semester, students study 14 ideas from science, philosophy, history, religion, sociology, and economics to discover how philosophical…

  7. Honors Anthropology and the Four Rs.

    Science.gov (United States)

    Farrer, Claire R.

    1990-01-01

    Describes an honors introductory cultural anthropology course taught at California State University, Chico. Discusses the course design, how course information is made relevant and reinforced, and how students have partial responsibility for the course design. Discusses the use of science fiction books to make material relevant to students. (JS)

  8. Sanitation: User perceptions and acceptance

    CSIR Research Space (South Africa)

    Duncker, Louiza C

    2014-05-01

    Full Text Available Research showed that many households that were provided with basic water and sanitation services have joined the backlog again due to the infrastructure not being used for the purpose it was intended to. Research also showed that in most cases...

  9. Programmed Cleaning and Environmental Sanitation.

    Science.gov (United States)

    Gardner, John C., Ed.

    Maintenance of sanitation in buildings, plants, offices, and institutions; the selection of cleaning materials for these purposes; and the organization and supervision of the cleaning program are becoming increasingly complex and needful of a higher cost of handling. This book describes these problems and gives helpful information and guidance for…

  10. Ship Roll Damping Control

    DEFF Research Database (Denmark)

    Perez, Tristan; Blanke, Mogens

    2012-01-01

    limitations and large variations of the spectral characteristics of wave-induced roll motion. This tutorial paper presents an account of the development of various ship roll motion control systems together with the challenges associated with their design. It discusses the assessment of performance...

  11. Cosmology with rolling tachyon

    Indian Academy of Sciences (India)

    Email: sami@iucaa.ernet.in. Abstract. We examine the possibility of rolling tachyon to play the dual role of inflaton at early epochs and dark matter at late times. We argue that enough inflation can be generated with the rolling tachyon either by invoking the large number of branes or brane world assisted inflation. However ...

  12. Origins of Rolling Friction

    Science.gov (United States)

    Cross, Rod

    2017-01-01

    When a hard object rolls on a soft surface, or vice versa, rolling friction arises from deformation of the soft object or the soft surface. The friction force can be described in terms of an offset in the normal reaction force or in terms of energy loss arising from the deformation. The origin of the friction force itself is not entirely clear. It…

  13. Roll force prediction of high strength steel using foil rolling theory in cold skin pass rolling

    International Nuclear Information System (INIS)

    Song, Gil Ho; Jung, Jae Chook

    2013-01-01

    Skin pass rolling is a very important process for applying a certain elongation to a strip in the cold rolling and annealing processes, which play an important role in preventing the stretching of the yield point when the material is processed. The exact prediction of the rolling force is essential for obtaining a given elongation with the steel grade and strip size. Unlike hot rolling and cold rolling, skin pass rolling is used to apply an elongation of within 2% to the strip. Under a small reduction, it is difficult to predict the rolling force because the elastic deformation behavior of the rolls is complicated and a model for predicting the rolling force has not yet been established. Nevertheless, the exact prediction of the rolling force in skin pass rolling has gained increasing importance in recent times with the rapid development of high strength steels for use in automobiles. In this study, the possibility of predicting the rolling force in skin pass rolling for producing various steel grades was examined using foil rolling theory, which is known to have similar elastic deformation behavior of rolls in the roll bite. It was found that a noncircular arc model is more accurate than a circular model in predicting the roll force of high strength steel below TS 980 MPa in skin pass rolling

  14. Paper-based plasma sanitizers.

    Science.gov (United States)

    Xie, Jingjin; Chen, Qiang; Suresh, Poornima; Roy, Subrata; White, James F; Mazzeo, Aaron D

    2017-05-16

    This work describes disposable plasma generators made from metallized paper. The fabricated plasma generators with layered and patterned sheets of paper provide a simple and flexible format for dielectric barrier discharge to create atmospheric plasma without an applied vacuum. The porosity of paper allows gas to permeate its bulk volume and fuel plasma, while plasma-induced forced convection cools the substrate. When electrically driven with oscillating peak-to-peak potentials of ±1 to ±10 kV, the paper-based devices produced both volume and surface plasmas capable of killing microbes. The plasma sanitizers deactivated greater than 99% of Saccharomyces cerevisiae and greater than 99.9% of Escherichia coli cells with 30 s of noncontact treatment. Characterization of plasma generated from the sanitizers revealed a detectable level of UV-C (1.9 nW⋅cm -2 ⋅nm -1 ), modest surface temperature (60 °C with 60 s of activation), and a high level of ozone (13 ppm with 60 s of activation). These results deliver insights into the mechanisms and suitability of paper-based substrates for active antimicrobial sanitization with scalable, flexible sheets. In addition, this work shows how paper-based generators are conformable to curved surfaces, appropriate for kirigami-like "stretchy" structures, compatible with user interfaces, and suitable for sanitization of microbes aerosolized onto a surface. In general, these disposable plasma generators represent progress toward biodegradable devices based on flexible renewable materials, which may impact the future design of protective garments, skin-like sensors for robots or prosthetics, and user interfaces in contaminated environments.

  15. 21 CFR 120.6 - Sanitation standard operating procedures.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Sanitation standard operating procedures. 120.6... Provisions § 120.6 Sanitation standard operating procedures. (a) Sanitation controls. Each processor shall have and implement a sanitation standard operating procedure (SSOP) that addresses sanitation...

  16. 9 CFR 416.12 - Development of Sanitation SOP's.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Development of Sanitation SOP's. 416... ACT SANITATION § 416.12 Development of Sanitation SOP's. (a) The Sanitation SOP's shall describe all... direct contamination or adulteration of product(s). (b) The Sanitation SOP's shall be signed and dated by...

  17. To honor and obey: Perceptions and disclosure of sexual assault among honor ideology women.

    Science.gov (United States)

    McLean, Caitlin L; Crowder, Marisa K; Kemmelmeier, Markus

    2018-05-15

    The overwhelming majority of rapes goes unreported. To better understand the sociocultural mechanisms behind why underreporting may occur, three studies (total n = 1,481) examine how women's endorsement of honor values influence the perceptions of rape. Using vignettes that varied the closeness of the perpetrator of a sexual assault (i.e., stranger, acquaintance, or husband), we found that women who endorse honor values of womanhood were less likely to label a forced sexual act as "rape" and to suggest that the victim discloses the rape to others, including to the police. This was especially true the closer the victim was to the perpetrator (e.g., husband vs. stranger). Our findings highlight the effects of honor values on perceived sexual assault and the consequences of disclosure, and may aid in understanding barriers to rape reporting and areas for intervention. © 2018 Wiley Periodicals, Inc.

  18. Shared sanitation: to include or to exclude?

    OpenAIRE

    Mara, Duncan

    2016-01-01

    Just over 600 million people used shared sanitation in 2015, but this form of sanitation is not considered ‘improved sanitation’ or, in the current terminology, ‘basic sanitation’ by WHO/UNICEF, principally because they are typically unhygienic. Recent research has shown that neighbour-shared toilets perform much better than large communal toilets. The successful development of community-designed, built and managed sanitation-and-water blocks in very poor urban areas in India should be adapte...

  19. NUMERICAL EVALUATION OF TEMPERATURE DISTRIBUTION IN THE ROLLING MILL ROLLS

    Directory of Open Access Journals (Sweden)

    José Claudino de Lira Júnior

    2013-06-01

    Full Text Available In hot rolling processes occur changes in the profile of the rolling mill rolls (expansion and contraction and constant wear due to mechanical stress and continuous thermal cycles of heating/cooling caused by contact rolled material- working roll and the cooling system by water jets in their surface, decreasing their lifetime. This paper presents a computational model to simulate the thermal performance of rolling mill rolls. The model was developed using the finite volume method for a transient two-dimensional system and allows calculating the temperature distribution of the rolling mill rolls under various conditions of service. Here it is investigated the influence of flow rate and temperature of the cooling water on the temperature distribution. The results show that the water temperature has greater influence than the water flow to control the surface temperature of the cylinders.

  20. Honors Programs at Smaller Colleges. 3rd Edition. National Collegiate Honors Council Monograph Series

    Science.gov (United States)

    Schuman, Samuel

    2011-01-01

    This monograph focuses upon areas of special concern to those working with honors at smaller colleges and universities: mission, recruitment, facilities, administration, budget, and curriculum. In each area, the author makes some general suggestions about overall operating principles, note specific issues that can lead to difficulties, and suggest…

  1. Demography of Honors: The Census of U.S. Honors Programs and Colleges

    Science.gov (United States)

    Scott, Richard I.; Smith, Patricia J.; Cognard-Black, Andrew J.

    2017-01-01

    Beginning in 2013 and spanning four research articles, we have implemented an empirical analysis protocol for honors education that is rooted in demography (Scott; Scott and Smith; Smith and Scott "Growth"; Smith and Scott, "Demography"). The goal of this protocol is to describe the structure and distribution of the honors…

  2. Honor as Cultural Mindset: Activated Honor Mindset Affects Subsequent Judgment and Attention in Mindset-Congruent Ways

    Directory of Open Access Journals (Sweden)

    Sheida Novin

    2016-12-01

    Full Text Available Honor values articulate gender roles, the importance of reputation in maintaining one’s place in society, and maintaining respect for the groups one belongs to. In that sense honor provides a template for organizing social interactions and hence may be functional even among people and societies that do not report valuing and endorsing honor. We test the prediction that honor influences judgment and attention when activated in two experiments (N=538. Using a culture-as-situated cognition perspective, we predicted that activating one aspect of honor would activate other aspects, even among individuals who do not much endorse honor values. We tested these predictions among European Americans, a group that is not typically associated with honor values. In each study, participants were randomly assigned to experimental or control groups, which differed in one way: the experimental group read statements about honor values as a first step and the control group did not. Participants then judged stick-figure pairs (judging which is male; Study 1, n = 130 or made lexical decisions (judging whether a letter-string formed a correctly spelled word; Study 2, n = 408. In Study 1, experimental group participants were more likely to choose the visually agentic figure as male. In Study 2, experimental group participants were more accurate at noticing that the letter-string formed a word if the word was an honor-relevant word (e.g., noble, but they did not differ from the control group if the word was irrelevant to honor (e.g., happy. Participants in both studies were just above the neutral point in their endorsement of honor values. Individual differences in honor values endorsement did not moderate the effects of activating an honor mindset. Though honor is often described as if it is located in space, we did not find clear effects of where our letter strings were located on the computer screen. Our findings suggest a new way to consider how honor functions

  3. Occupational skin diseases and prevention among sanitation ...

    African Journals Online (AJOL)

    Background: Little research has been focused on the health status or the occupational protection awareness of sanitation workers. The policy recommendations on the occupational safety and health of sanitation workers based on the scientific research are also insufficient in developing countries like China. Objective: To ...

  4. Egg processing plant sanitation, SSOPs, and GMPs.

    Science.gov (United States)

    The basis of food safety programs in processing facilities is prerequisite programs such as sanitation and good manufacturing practices. Thoughtful, thorough, and complete sanitation programs are necessary to enhance the food safety of products and reduce the likelihood of foodborne illness. Egg p...

  5. 36 CFR 331.7 - Sanitation.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Sanitation. 331.7 Section 331.7 Parks, Forests, and Public Property CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY REGULATIONS..., KENTUCKY AND INDIANA § 331.7 Sanitation. (a) Garbage, trash, rubbish, litter, or any other waste material...

  6. Sanitation & Safety for Child Feeding Programs.

    Science.gov (United States)

    Florida State Dept. of Health and Rehabilitative Services, Tallahassee.

    In the interest of promoting good health, sanitation, and safety practices in the operation of child feeding programs, this bulletin discusses practices in personal grooming and wearing apparel; the purchasing, storage, handling, and serving of food; sanitizing equipment and utensils; procedures to follow in case of a food poisoning outbreak; some…

  7. 46 CFR 97.15-10 - Sanitation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Sanitation. 97.15-10 Section 97.15-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS OPERATIONS Tests, Drills, and Inspections § 97.15-10 Sanitation. (a) It shall be the duty of the master and chief engineer...

  8. 36 CFR 13.1232 - Sanitation.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Sanitation. 13.1232 Section 13.1232 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR... Developed Area § 13.1232 Sanitation. Within the BCDA, washing dishes or cooking utensils at locations other...

  9. 36 CFR 261.11 - Sanitation.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Sanitation. 261.11 Section 261.11 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE PROHIBITIONS General Prohibitions § 261.11 Sanitation. The following are prohibited: (a) Depositing in any toilet...

  10. 9 CFR 3.56 - Sanitation.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Sanitation. 3.56 Section 3.56 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL... Animal Health and Husbandry Standards § 3.56 Sanitation. (a) Cleaning of primary enclosures. (1) Primary...

  11. 46 CFR 78.17-25 - Sanitation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Sanitation. 78.17-25 Section 78.17-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Tests, Drills, and Inspections § 78.17-25 Sanitation. (a) It shall be the duty of the master and chief engineer to see that the...

  12. Enhancing governance for sanitation marketing in DRC

    NARCIS (Netherlands)

    Klaver, D.C.

    2015-01-01

    This report is one of the results of the ‘Sanitation Marketing in Equateur Province’ project in RDC, in which Wageningen UR and Oxfam Great Britain (Oxfam GB) work together.

    • It Describes the characteristics of different governance arrangements that address sanitation problems in Gemena

  13. 46 CFR 196.15-10 - Sanitation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Sanitation. 196.15-10 Section 196.15-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS OPERATIONS Test, Drills, and Inspections § 196.15-10 Sanitation. (a) It shall be the duty of the master and chief engineer...

  14. 46 CFR 109.203 - Sanitation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Sanitation. 109.203 Section 109.203 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Tests, Drills, and Inspections § 109.203 Sanitation. (a) The master or person in charge shall insure that the accommodation...

  15. 43 CFR 423.34 - Sanitation.

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Sanitation. 423.34 Section 423.34 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION, DEPARTMENT OF THE INTERIOR... Sanitation. (a) You must not bring or improperly dispose of refuse on Reclamation facilities, lands, and...

  16. 36 CFR 327.9 - Sanitation.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Sanitation. 327.9 Section 327.9 Parks, Forests, and Public Property CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY RULES AND... § 327.9 Sanitation. (a) Garbage, trash, rubbish, litter, gray water, or any other waste material or...

  17. Removal of micropollutants in source separated sanitation

    NARCIS (Netherlands)

    Butkovskyi, A.

    2015-01-01

    Source separated sanitation is an innovative sanitation method designed for minimizing use of energy and clean drinking water, and maximizing reuse of water, organics and nutrients from waste water. This approach is based on separate collection and treatment of toilet wastewater (black water) and

  18. Rolling at small scales

    DEFF Research Database (Denmark)

    Nielsen, Kim L.; Niordson, Christian F.; Hutchinson, John W.

    2016-01-01

    The rolling process is widely used in the metal forming industry and has been so for many years. However, the process has attracted renewed interest as it recently has been adapted to very small scales where conventional plasticity theory cannot accurately predict the material response. It is well....... Metals are known to be stronger when large strain gradients appear over a few microns; hence, the forces involved in the rolling process are expected to increase relatively at these smaller scales. In the present numerical analysis, a steady-state modeling technique that enables convergence without...

  19. METHOD OF ROLLING URANIUM

    Science.gov (United States)

    Smith, C.S.

    1959-08-01

    A method is described for rolling uranium metal at relatively low temperatures and under non-oxidizing conditions. The method involves the steps of heating the uranium to 200 deg C in an oil bath, withdrawing the uranium and permitting the oil to drain so that only a thin protective coating remains and rolling the oil coated uranium at a temperature of 200 deg C to give about a 15% reduction in thickness at each pass. The operation may be repeated to accomplish about a 90% reduction without edge cracking, checking or any appreciable increase in brittleness.

  20. Creating Opportunities for Peer Leadership in Honors Education

    Science.gov (United States)

    Leichliter, Marie E.

    2013-01-01

    Honors educators are privileged to work with exceptional students who are also some of the most engaged and motivated students on campus. These students often seek opportunities within their honors experience to study abroad, join community service organizations, conduct research, participate in internships, and develop their leadership skills.…

  1. Assessing Success in Honors: Getting beyond Graduation Rates

    Science.gov (United States)

    Kelly, Sean K.

    2013-01-01

    An honors curriculum with realistic graduation requirements should have a respectable graduation rate. This number, when low, can indicate significant problems in the program. But a high graduation rate does not necessarily indicate success. A quality honors program, especially one that remains attentive to students' ability to thrive, might have…

  2. Honors Thesis Preparation: Evidence of the Benefits of Structured Curricula

    Science.gov (United States)

    Engel, Steven

    2016-01-01

    A recent study of honors curricula across the nation indicates that 75.6% of honors programs and colleges at four-year institutions have thesis or capstone requirements (Savage and Cognard-Black). In addition to institutions with thesis requirements, many more also have the option for students to complete theses. For example, an earlier study…

  3. Turning Points: Improving Honors Student Preparation for Thesis Completion

    Science.gov (United States)

    Patino, Cynthia

    2012-01-01

    This dissertation is an action research study that had as its primary goal to increase retention of honors college students at Arizona State University by implementing an additional advising session during the fifth semester of their academic career. Introducing additional, strategically-timed support for the honors thesis and demystifying the…

  4. An Augustinian Culture of Learning for Interdisciplinary Honors Programs

    Science.gov (United States)

    Ste. Antoine, Tom

    2010-01-01

    Any attempt to discern the purpose of honors education and to integrate it with the unique ethos of a Christian institution can prove to be difficult. Yet, describing and articulating a sense of purpose is essential for an honors program to justify itself. This essay contends that a philosophy of education based on Augustine's…

  5. Hearts and Minds: Honors Programs in North American Christian Institutions

    Science.gov (United States)

    Bratt, Kenneth

    2010-01-01

    For readers outside North America, the concept of "honors education" may be confusing (since the word honours features in British and Commonwealth degree titles) or obscure (bringing to mind associations with aristocratic privilege or elitist competition). But in the United States the development of honors programs in colleges, and later honors…

  6. R&D 100 Awards Honor NREL Research

    Science.gov (United States)

    R&D 100 Awards Honor NREL Research For more information contact: George Douglas 303-275-4096 e National Renewable Energy Laboratory will be honored Thursday with two R&D 100 awards. The awards are given each year by the editors of R&D Magazine for what they consider to be among the year's 100

  7. Aan de slag met honors : praktijklessen uit Europa

    NARCIS (Netherlands)

    Wolfensberger, Marca; Hogenstijn, Maarten

    2015-01-01

    In de brochure ‘Aan de slag met honors’ worden onderzoeksresultaten van het onderzoeksproject Honors in Europe hertaald naar tips voor succesvol en inspirerend honorsonderwijs. De brochure is grotendeels gebaseerd op het boek Talent Development in European Higher Education – Honors programs in the

  8. Building Bridges between Science Courses Using Honors Organic Chemistry Projects

    Science.gov (United States)

    Hickey, Timothy; Pontrello, Jason

    2016-01-01

    Introductory undergraduate science courses are traditionally offered as distinct units without formalized student interaction between classes. To bridge science courses, the authors used three Honors Organic Chemistry projects paired with other science courses. The honors students delivered presentations to mainstream organic course students and…

  9. Person og Rolle

    DEFF Research Database (Denmark)

    Szatkowski, Janek

    2011-01-01

    Distinktionen mellem person og rolle forslås som grundlag for et præcist og anlytisk anvendeligt begreb om performativitet. Begrebet tager sigte på at beskrive enkeltindividers og gruppers kommunikation med henblik på hvordan kommunikation etableres. Performativitet gør det muligt at iagttage den...

  10. Ship Roll Motion Control

    DEFF Research Database (Denmark)

    Perez, Tristan; Blanke, Mogens

    2010-01-01

    . This tutorial paper presents an account of the development of various ship roll motion control systems and the challenges associated with their design. The paper discusses how to assess performance, the applicability of dierent models, and control methods that have been applied in the past....

  11. Rolling Cylinder Phase 1

    DEFF Research Database (Denmark)

    Margheritini, Lucia; Taraborrelli, Valeria Taraborrelli

    Margheritini and Valeria Taraborrelli(valeria.taraborrelli@hotmail.it) with a total of 3 day visit from the developers. Laboratory tests in irregular waves will be performed by Lucia Margheritini. The report is aimed at the first stage testing of the Rolling Cylinder wave energy device. This phase includes...

  12. Fear of the Loss of Honor: Implications of Honor-Based Violence for the Development of Youth and Their Families

    Science.gov (United States)

    Sedem, Mina; Ferrer-Wreder, Laura

    2015-01-01

    Background: Violence committed against young women, and in some cases young men, who are considered to have violated honor-based norms are reported in several countries, making honor-based violence (HBV) a global concern. This article is an overview of research in this area and summarizes key findings from a Swedish program of research dedicated…

  13. Honor as Cultural Mindset: Activated Honor Mindset Affects Subsequent Judgment and Attention in Mindset-Congruent Ways

    NARCIS (Netherlands)

    Novin, Sheida; Oyserman, Daphna

    2016-01-01

    Honor values articulate gender roles, the importance of reputation in maintaining one’s place in society, and maintaining respect for the groups one belongs to. In that sense honor provides a template for organizing social interactions and hence may be functional even among people and societies that

  14. 77 FR 12843 - Fees for Sanitation Inspections of Cruise Ships

    Science.gov (United States)

    2012-03-02

    ... Sanitation Inspections of Cruise Ships AGENCY: Centers for Disease Control and Prevention (CDC), Department... diseases. The fee schedule for sanitation inspections of passenger cruise ships inspected under VSP was... sanitation inspections. These inspections are conducted by CDC's Vessel Sanitation Program (VSP). VSP assists...

  15. 9 CFR 416.14 - Maintenance of Sanitation SOP's.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Maintenance of Sanitation SOP's. 416... ACT SANITATION § 416.14 Maintenance of Sanitation SOP's. Each official establishment shall routinely evaluate the effectiveness of the Sanitation SOP's and the procedures therein in preventing direct...

  16. Economic Assessment of Sanitation Interventions in Lao People's Democratic Republic

    OpenAIRE

    World Bank

    2013-01-01

    Access to improved sanitation is a major concern in the Lao People s Democratic Republic. Only 63 percent of the population of the country had access to improved sanitation facilities in 2010. Sanitation conditions are worse in rural areas. This study aims to generate evidence on the costs and benefits of sanitation improvements Lao PDR.

  17. Rolling bearing analysis

    CERN Document Server

    Harris, Tedric A

    2001-01-01

    One of the most well-known experts in the field brings cutting-edge research to practitioners in the new edition of this important reference. Covers the improved mathematical calculations for rolling bearing endurance developed by the American Society of Mechanical Engineers and the Society of Lubrication and Tribology Engineers. Updated with new material on Condition-Based Maintenance, new testing methods, and new bearing materials.

  18. Roll of honour

    Energy Technology Data Exchange (ETDEWEB)

    Moxon, Suzanne

    1999-07-01

    This article gives details of the design and construction of dams selected by members of the dam construction industry for praise as feats of construction. The dams covered in the roll of honour include the dam at the Guri hydroelectric power station in Venezuela on the Caroni river, the Contra dam on the Verzrasca river in Switzerland, and the double curvature arc Ertan dam on the Yalong river in China. (UK)

  19. Shear Roll Mill Reactivation

    Science.gov (United States)

    2012-09-13

    pneumatically operated paste dumper and belt conveyor system, the loss in weight feeder system, the hydraulically operated shear roll mill, the pellet...out feed belt conveyor , and the pack out system comprised of the metal detector, scale, and pack out empty and full drum roller conveyors . Page | 4...feed hopper and conveyor supplying the loss in weight feeder were turned on, and it was verified that these items functioned as designed . The

  20. Occupational skin diseases and prevention among sanitation ...

    African Journals Online (AJOL)

    in body defense, and is predisposed to disease when subjected to ... sanitation workers in Wuhan (China) for better manage- ment and ... Symptoms of facial skin photo .... ronment, diet nutrition and working environment were also poor.

  1. Water and Sanitation Standards in Humanitarian Action

    Directory of Open Access Journals (Sweden)

    Murat ERSEL

    2015-10-01

    Full Text Available SUMMARY: The right to water and sanitation is an inextricable human right. Water and sanitation are critical determinants for survival in the initial stages of a disaster. An adequate amount of safe water is necessary to prevent death from dehydration, to reduce the risk of water-related disease and to provide for consumption, cooking and personal and domestic hygienic requirements. The main objective of WASH – (Water supply, Sanitation and Hygenie promotion programmes in disasters is to reduce the transmission of faeco-oral diseases and exposure to disease-bearing vectors through the promotion of: good hygiene practices, the provision of safe drinking water, the reduction of environmental health risks, the conditions that allow people to a healthy life with dignity, comfort and security. Keywords: Water, sanitation, disasters, humanitarian response, hygenie promotion, drainage, vector control, waste disposition

  2. 9 CFR 3.107 - Sanitation.

    Science.gov (United States)

    2010-01-01

    ... in food preparation must be cleaned and sanitized after each use. Kitchens and other food handling... marine mammals except when deemed essential by an attending veterinarian. [66 FR 253, Jan. 3, 2001] ...

  3. Removal of micropollutants in source separated sanitation

    OpenAIRE

    Butkovskyi, A.

    2015-01-01

    Source separated sanitation is an innovative sanitation method designed for minimizing use of energy and clean drinking water, and maximizing reuse of water, organics and nutrients from waste water. This approach is based on separate collection and treatment of toilet wastewater (black water) and the rest of the domestic wastewater (grey water). Different characteristics of wastewater streams facilitate recovery of energy, nutrients and fresh water. To ensure agricultural or ecological reuse ...

  4. A Tradition Unlike Any Other: Research on the Value of an Honors Senior Thesis

    Science.gov (United States)

    Banks, H. Kay

    2016-01-01

    An honors senior thesis introduces students into a world of scholarship and professional activity in a way that no single course, either semester- or year-long, can do (Anderson, Lyons, and Weiner). Many honors educators consider honors thesis work to be the defining honors experience. For graduate schools, employers, and the students themselves,…

  5. Mission, Performance Indicators, and Assessment in U.S. Honors: A View from the Netherlands

    Science.gov (United States)

    Bartelds, Vladimir; Drayer, Lyndsay; Wolfensberger, Marca V. C.

    2012-01-01

    A mission statement that identifies the goals and aims of an honors program is a key step in program development. The National Collegiate Honors Council's Basic Characteristics of a Fully Developed Honors Program states unequivocally that a successful honors program "has a clear mandate from the institution's administration in the form of a…

  6. Roll-to-Roll production of carbon nanotubes based supercapacitors

    Science.gov (United States)

    Zhu, Jingyi; Childress, Anthony; Karakaya, Mehmet; Roberts, Mark; Arcilla-Velez, Margarita; Podila, Ramakrishna; Rao, Apparao

    2014-03-01

    Carbon nanomaterials provide an excellent platform for electrochemical double layer capacitors (EDLCs). However, current industrial methods for producing carbon nanotubes are expensive and thereby increase the costs of energy storage to more than 10 Wh/kg. In this regard, we developed a facile roll-to-roll production technology for scalable manufacturing of multi-walled carbon nanotubes (MWNTs) with variable density on run-of-the-mill kitchen Al foils. Our method produces MWNTs with diameter (heights) between 50-100 nm (10-100 μm), and a specific capacitance as high as ~ 100 F/g in non-aqueous electrolytes. In this talk, the fundamental challenges involved in EDLC-suitable MWNT growth, roll-to-roll production, and device manufacturing will be discussed along with electrochemical characteristics of roll-to-roll MWNTs. Research supported by NSF CMMI Grant1246800.

  7. Spray rolling aluminum alloy strip

    Energy Technology Data Exchange (ETDEWEB)

    McHugh, Kevin M.; Delplanque, J.-P.; Johnson, S.B.; Lavernia, E.J.; Zhou, Y.; Lin, Y

    2004-10-10

    Spray rolling combines spray forming with twin-roll casting to process metal flat products. It consists of atomizing molten metal with a high velocity inert gas, cooling the resultant droplets in flight and directing the spray between mill rolls. In-flight convection heat transfer from atomized droplets teams with conductive cooling at the rolls to rapidly remove the alloy's latent heat. Hot deformation of the semi-solid material in the rolls results in fully consolidated, rapidly solidified product. While similar in some ways to twin-roll casting, spray rolling has the advantage of being able to process alloys with broad freezing ranges at high production rates. This paper describes the process and summarizes microstructure and tensile properties of spray-rolled 2124 and 7050 aluminum alloy strips. A Lagrangian/Eulerian poly-dispersed spray flight and deposition model is described that provides some insight into the development of the spray rolling process. This spray model follows droplets during flight toward the rolls, through impact and spreading, and includes oxide film formation and breakup when relevant.

  8. IEEE Honors DeBlasio with Steinmetz Award | News | NREL

    Science.gov (United States)

    professional association, with the 2010 Charles Proteus Steinmetz Award. The award will be presented on Dec. 5 with the U.S. Department of the Energy's National Renewable Energy Laboratory (NREL), will be honored

  9. Honor, Anger, and Belittlement in Aristotle’s Ethics

    Directory of Open Access Journals (Sweden)

    Robert Sokolowski

    2014-06-01

    Full Text Available The author considers the phenomenon of honor (timē by examining Aristotle’s description of it and its role in ethical and political life. His study of honor leads him to two related phenomena, anger (orgē and belittlement or contempt (oligōria; examining them helps him define honor more precisely. With his examination of honor the author shows how densely interwoven Aristotle’s ethical theory is; he illuminates such diverse things as the human good, political life and friendship, virtue, vice, incontinence, flattery, wealth and pleasure; he shows how the metaphysical principles of dunamis and energeia are at work in human affairs; he treats the passion of anger as well as the moral attitude of contempt that provokes it, and he situates both within the study of rhetoric.

  10. And the Top Honor Goes to Voc Ed.

    Science.gov (United States)

    Hettinger, James

    1998-01-01

    Ray Chelewski is the first vocational-technical educator to win Walt Disney's top teaching honor. Chelewski is an agriculture teacher at the Presque Isle Regional Technology Center in northeast Maine. (JOW)

  11. Enterobacteriaceae and Salmonella recovered from non-sanitized and sanitized broiler hatching eggs

    Science.gov (United States)

    Sanitizing hatching eggs may reduce the chances that a flock will become colonized with Salmonella and reduce the numbers of other microorganisms, such as Enterobacteriaceae, that can depress hatchability. An experiment was conducted to determine if a quaternary-biguanide sanitizer applied as foam ...

  12. Symposium in Honor of Minoru M. Freund

    CERN Document Server

    Langhoff, Stephanie

    2014-01-01

    The presentations at this NASA-hosted Symposium in honor of Mino Freund will touch upon the fields, to which his prolific mind has made significant contributions. These include low temperature physics, cosmology, and nanotechnology with its wide-ranging applicability to material science, neuroscience, Earth sciences and satellite technology.  To learn more about Mino’s career you can download the "Tribute" , which outlines his journey from (i) low-temperature physics and superconductivity at the ETH Zürich to (ii) building one remarkable milliKelvin refrigerator for the US-Japan IRTS mission at UC Berkeley and ISAS in Japan to (iii) a decade in cosmology, to (iv) being on the micro-bolometer team at NASA Goddard for the HAWC instrument on SOFIA, to (v) developing at AFRL the nanotechnology portfolio for the entire Air Force.  This was followed by six years at the NASA Ames Research Center, where Mino formulated his far-ahead ideas about swarms of capable nanosats circling the Earth, which have since star...

  13. Roll back malaria update.

    Science.gov (United States)

    1999-10-01

    This article presents the activities under WHO's Roll Back Malaria (RBM) program in Asia, particularly in Nepal, Indonesia, India, Bangladesh, Sri Lanka and the Philippines. In India, the RBM program will start in 5 districts with a major malaria problem. A national committee has been formed by researchers, which will be able to provide operational and strategic support and research expertise in relation to malaria. In Bangladesh, the RBM program was initiated in the sparsely populated hill tract areas of Banderban and Chittagong where access to health care is very poor. At the district level, effective partnerships with private practitioners, politicians, community leaders, school teachers, the press and district Ministry of Health officials are operating to plan for rolling back malaria. In Myanmar, Cambodia, Lao People's Democratic Republic, Yunnan province of China, Vietnam, and Thailand, the focus of the RBM program was to move health care closer to the malaria-infected communities. WHO¿s Global Health Leadership Fellowship Programme, supported by the UN Foundation and Rockefeller Foundation, enables potential leaders to experience the work of UN agencies and contribute to the work of the organization for 2 years. Three out of four persons appointed to the RBM program received prestigious awards: Dr. Paola Marchesini of Brazil; Dr. Tieman Diarra of Mali; and Dr. Bob Taylor of the UK.

  14. Roll-to-roll UV imprint lithography for flexible electronics

    NARCIS (Netherlands)

    Maury, P.; Turkenburg, D.H.; Stroeks, N.; Giesen, P.; Barbu, I.; Meinders, E.R.; Bremen, A. van; Iosad, N.; Werf, R. van der; Onvlee, H.

    2011-01-01

    We propose a roll-to-roll UV imprint lithography tool as a way to pattern flexible PET foil with µm-resolution. As a way to overcome dimensional instability of the foil and its effect on overlay, a self-align approach was investigated, that permits to make several layers in a single lithography

  15. RELATIONSHIP BETWEEN ROLLING AND SLIP RESISTANCE IN ROLLING BEARINGS

    Directory of Open Access Journals (Sweden)

    L. M. Bondarenko

    2016-06-01

    Full Text Available Purpose. About one of the causes of slip rolling is known from the second half of the 19th century, it was believed that the slip resistance appears at the place of contact due to different speeds on the arc of contact. Only in the mid-20th century it was proved that this resistance is negligible in rolling resistance. However (for some unknown reason it is ignored the fact that in practice in rolling bearings may rotate both the inner ring with a stationary outer one, and vice versa almost in equal relations. It is not taken into account the fact that the ball or roller in the rolling bearings runs the different distance along the roller path of the outer and inner bearing cages in one revolution. This fact is not taken into account in determining the calculated values for the friction coefficient of a rolling bearing reduced to the shaft. Therefore, the aim of this work is to determine the influence of path length on the track riding the outer and inner race of the bearing on the determination of the calculated value of the coefficient of friction of rolling bearings is given to the shaft. Methodology. The solution technique is based on the theory of plane motion of a rigid body, the theory of Hertzian contact deformation and the analytical dependencies for determination of coefficient of rolling friction. Findings. The obtained dependences on determination of rolling resistance of the balls or rollers along the bearing tracks of inner and outer bearing cages as well as path difference metering of the rolling on them allows to analytically obtain the rolling resistance and slipping for any size of bearings and different devices of bearing units. It is also possible at the design stage of rolling nodes to handle not only the design but also the content of the node. Originality. Using the analytical dependences for determination of the rolling resistance of bodies at point and line contacts, and also account for the difference in the path of the

  16. Assessing Women's Negative Sanitation Experiences and Concerns: The Development of a Novel Sanitation Insecurity Measure.

    Science.gov (United States)

    Caruso, Bethany A; Clasen, Thomas; Yount, Kathryn M; Cooper, Hannah L F; Hadley, Craig; Haardörfer, Regine

    2017-07-11

    Lack of access to acceptable sanitation facilities can expose individuals, particularly women, to physical, social, and mental health risks. While some of the challenges have been documented, standard metrics are needed to determine the extent to which women have urination- and defecation-related concerns and negative experiences. Such metrics also are needed to assess the effectiveness of interventions to mitigate them. We developed a sanitation insecurity measure to capture the range and frequency of women's sanitation-related concerns and negative experiences. Research was conducted in rural Odisha, India with women across various life course stages to reflect a range of perspectives. This paper documents the mixed data collection methods and the exploratory and confirmatory factor analyses we employed to arrive at a final measure. The final sanitation insecurity measure includes 50 items across seven factors that reflect the physical environment, the social environment, and individual-level constraints. Most factor scores were significantly higher for unmarried women and for women who lacked access to functional latrines, indicating social and environmental influence on experiences. This measure will enable researchers to evaluate how sanitation insecurity affects health and to determine if and how sanitation interventions ameliorate women's concerns and negative experiences associated with sanitation.

  17. LEDs are on a roll

    NARCIS (Netherlands)

    Blom, P.W.M.; Mol, A.M.B. van

    2011-01-01

    Light-emitting diodes are more efficient than conventional lighting, but high production costs limit their uptake. Organic versions that can be produced using a cheap newspaper-style 'roll-to-roll' printing process are likely to revolutionize our lighting and signage, say Paul Blom and Ton van Mol.

  18. Anisotropic constant-roll inflation

    Energy Technology Data Exchange (ETDEWEB)

    Ito, Asuka; Soda, Jiro [Kobe University, Department of Physics, Kobe (Japan)

    2018-01-15

    We study constant-roll inflation in the presence of a gauge field coupled to an inflaton. By imposing the constant anisotropy condition, we find new exact anisotropic constant-roll inflationary solutions which include anisotropic power-law inflation as a special case. We also numerically show that the new anisotropic solutions are attractors in the phase space. (orig.)

  19. Rolling up a Graphene Sheet

    NARCIS (Netherlands)

    Calvaresi, Matteo; Quintana, Mildred; Rudolf, Petra; Zerbetto, Francesco; Prato, Maurizio

    2013-01-01

    Carbon Nanotubes, CNTs, have been described as rolled-up graphene layers. Matching this concept to experiments has been a great experimental challenge for it requires a method to exfoliate graphite, generate ordered and stable dangling carbon bonds, and roll up the layer without affecting the

  20. Rudder roll stabilization for ships

    NARCIS (Netherlands)

    van Amerongen, J.; van der Klugt, P.G.M.; van Nauta lemke, H.R.

    1990-01-01

    This paper describes the design of an autopilot for rudder roll stabilization for ships. This autopilot uses the rudder not only for course keeping but also for reduction of the roll. The system has a series of properties which make the controller design far from straightforward: the process has

  1. Water Supply and Sanitation Facility Accessibility in Off-Campus ...

    African Journals Online (AJOL)

    Water Supply and Sanitation Facility Accessibility in Off-Campus Houses ... on drinking water source, rate of illness, type and usage of sanitation facilities. ... wells, unprotected dug wells; while others during the wet season harvest rain water.

  2. Computational design of rolling bearings

    CERN Document Server

    Nguyen-Schäfer, Hung

    2016-01-01

    This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.

  3. 49 CFR 229.139 - Sanitation, servicing requirements.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Sanitation, servicing requirements. 229.139... Cab Equipment § 229.139 Sanitation, servicing requirements. (a) The sanitation compartment of each... intended such that: (1) All mechanical systems shall function; (2) Water shall be present in sufficient...

  4. 77 FR 50511 - Fees for Sanitation Inspections of Cruise Ships

    Science.gov (United States)

    2012-08-21

    ... Sanitation Inspections of Cruise Ships AGENCY: Centers for Disease Control and Prevention (CDC), Department... schedule for sanitation inspections of passenger cruise ships by VSP was first published in the Federal...), announces fees for vessel sanitation inspections for Fiscal Year (FY) 2013. These inspections are conducted...

  5. 46 CFR 131.940 - Marine sanitation device.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Marine sanitation device. 131.940 Section 131.940... Miscellaneous § 131.940 Marine sanitation device. Each vessel with installed toilet facilities must have a marine sanitation device in compliance with 33 CFR part 159. ...

  6. 46 CFR 184.704 - Marine sanitation devices.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Marine sanitation devices. 184.704 Section 184.704... TONS) VESSEL CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Miscellaneous § 184.704 Marine sanitation devices. A vessel with installed toilet facilities must have a marine sanitation device that complies with...

  7. 18 CFR 1304.401 - Marine sanitation devices.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Marine sanitation... Miscellaneous § 1304.401 Marine sanitation devices. No person operating a commercial boat dock permitted under... equipped with a marine sanitation device (MSD) unless such MSD is in compliance with all applicable...

  8. 46 CFR 121.704 - Marine sanitation devices.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Marine sanitation devices. 121.704 Section 121.704... MISCELLANEOUS SYSTEMS AND EQUIPMENT Miscellaneous § 121.704 Marine sanitation devices. A vessel with installed toilet facilities must have a marine sanitation device that complies with 33 CFR part 159. [CGD 85-080...

  9. 25 CFR 91.13 - Health, sanitation, and sewerage disposal.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Health, sanitation, and sewerage disposal. 91.13 Section... INDIAN VILLAGES, OSAGE RESERVATION, OKLAHOMA § 91.13 Health, sanitation, and sewerage disposal. Health, sanitation, and sewerage disposal problems within the village reserves shall be subject to and controlled by...

  10. 9 CFR 3.131 - Sanitation.

    Science.gov (United States)

    2010-01-01

    ... Warmblooded Animals Other Than Dogs, Cats, Rabbits, Hamsters, Guinea Pigs, Nonhuman Primates, and Marine... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Sanitation. 3.131 Section 3.131 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL...

  11. 21 CFR 211.56 - Sanitation.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Sanitation. 211.56 Section 211.56 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL... rodents, birds, insects, and other vermin (other than laboratory animals). Trash and organic waste matter...

  12. 9 CFR 3.31 - Sanitation.

    Science.gov (United States)

    2010-01-01

    ... therein due to leakage of the watering system, discharges from dead or dying animals, spoiled perishable...) Primary enclosures for guinea pigs or hamsters shall be sanitized by washing them with hot water (180 °F... forth in this subpart. Premises shall remain free of accumulations of trash. (c) Pest control. An...

  13. Regional analysis of sanitation performance in India

    NARCIS (Netherlands)

    Bose, Debasree; Dutta, Arijita

    2017-01-01

    India bears a disproportionate burden of open defecation in spite of investing more and more funds and ushering in several institutional efforts including the Swachh Bharat Mission in the recent past. A large share of rural households still lack basic sanitation facilities in India and members

  14. Sanitation in the Shell Egg Processing Environment

    Science.gov (United States)

    In the past, most of the regulations regarding egg processing are concerned with quality rather than safety. Hazard Analysis and Critical Control Point (HACCP) will be required by retailers or by the federal government. GMPs (Good Manufacturing Practices) and SSOPs (Sanitation Standard Operating P...

  15. Sanitation of viral haemorrhagic septicaemia (VHS)

    DEFF Research Database (Denmark)

    Olesen, Niels Jørgen

    1998-01-01

    A sanitation programme for stamping-out viral haemorrhagic septicaemia (VHS) was implemented in Denmark in 1965. The programme has resulted in a dramatic reduction in the number of infected rainbow trout farms, from approximate to 400 to 26. The programme is carried out on a voluntary basis...

  16. Exploring Community Sanitation Preferences for Environmental

    African Journals Online (AJOL)

    water, poor sanitation and lack of hygiene causes 1.8 million deaths per year, .... collecting urban nightsoil is regarded as employment for people of very low ... Indeed, in some countries (e.g., India, Ghana), the ... women generally have fewer facilities than men, and the lack of provision .... deaths and gender inequality.

  17. Dry sanitation concepts with inspiration from nature

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Hesselberg, Thomas

    2015-01-01

    Poor sanitation is a major problem for health and water resources in many developing countries. Inexpensive but also attractive toilets could be a way to fight these problems. However, radical new ideas are needed to identify innovative solutions. Such novel ideas might be found by using systemat...

  18. Stress and accidental defect detection on rolling mill rolls

    International Nuclear Information System (INIS)

    Auzas, J.-D.

    1999-01-01

    During the rolling mill process, rolls are submitted to high pressures that can lead to local decohesion or metallurgical changes. Both these cracks or softened areas must be detected as soon as they appear because of the risk of spalling, marks on the product, and mill wreck. These defects can be detected using the eddy current method, and particularly sensors specially developed for micro-defects detection. These sensors must be adapted to the environment of a roll grinding machine on which they must be installed. Users' schedule of conditions also require them to be attached to a wide range of eddy current generator and automatic computerized interpretation. Mill requirements for new high tech roll grades and quality lead to continuous development and improvement of the tools that will provide immediate 'go - no go' information. This paper is an update of these developments. (author)

  19. Roll bonding of strained aluminium

    DEFF Research Database (Denmark)

    Staun, Jakob M.

    2003-01-01

    This report investigates roll bonding of pre-strained (å ~ 4) aluminium sheets to produce high strain material from high purity aluminium (99.996%) and commercial pure aluminium (99.6%). The degree of bonding is investigated by optical microscopy and ultrasonic scanning. Under the right...... of the cross rolled volume fraction is found. To further asses this effect, and the anisotropy, it is necessary to acquire knowledge about both texture and microstructure, e.g. by TEM. Roll bonding of pre-strained aluminium is found to be a possible alternative to ARB in the quest for ultra-fine grained...

  20. Manufacturing Demonstration Facility: Roll-to-Roll Processing

    Energy Technology Data Exchange (ETDEWEB)

    Datskos, Panos G [ORNL; Joshi, Pooran C [ORNL; List III, Frederick Alyious [ORNL; Duty, Chad E [ORNL; Armstrong, Beth L [ORNL; Ivanov, Ilia N [ORNL; Jacobs, Christopher B [ORNL; Graham, David E [ORNL; Moon, Ji Won [ORNL

    2015-08-01

    This Manufacturing Demonstration Facility (MDF)e roll-to-roll processing effort described in this report provided an excellent opportunity to investigate a number of advanced manufacturing approaches to achieve a path for low cost devices and sensors. Critical to this effort is the ability to deposit thin films at low temperatures using nanomaterials derived from nanofermentation. The overarching goal of this project was to develop roll-to-roll manufacturing processes of thin film deposition on low-cost flexible substrates for electronics and sensor applications. This project utilized ORNL s unique Pulse Thermal Processing (PTP) technologies coupled with non-vacuum low temperature deposition techniques, ORNL s clean room facility, slot dye coating, drop casting, spin coating, screen printing and several other equipment including a Dimatix ink jet printer and a large-scale Kyocera ink jet printer. The roll-to-roll processing project had three main tasks: 1) develop and demonstrate zinc-Zn based opto-electronic sensors using low cost nanoparticulate structures manufactured in a related MDF Project using nanofermentation techniques, 2) evaluate the use of silver based conductive inks developed by project partner NovaCentrix for electronic device fabrication, and 3) demonstrate a suite of low cost printed sensors developed using non-vacuum deposition techniques which involved the integration of metal and semiconductor layers to establish a diverse sensor platform technology.

  1. Environmental Sanitation Crisis: More than just a health issue

    Directory of Open Access Journals (Sweden)

    Peter A. Harvey

    2008-01-01

    Full Text Available The global environmental sanitation crisis cannot be denied: well over a century after the sanitary revolution in 19th century Europe, 40% of the world’s population still lacks access to improved sanitation. Important lessons from the past must be applied today if the crisis is to be averted. Sanitation has suffered from a lack of prioritization for as long as it has remained the poor relation to water supply. The International Year of Sanitation 2008 provides an opportunity to separate the two and give sanitation the emphasis it requires. The economic argument for sanitation must be articulated and non-health incentives for improved sanitation exploited. Environmental sanitation results in a multitude of socio-economic benefits and can contribute positively to all the Millennium Development Goals. Community-led bottom-up approaches, rather than supply-led or technology-driven approaches, are most effective in increasing and sustaining access to sanitation but need to be implemented at scale. Targeted strategies for urban and school sanitation are also required. Evidence-based advocacy can help develop the political will that is now needed to ensure sufficient public sector investment, leadership, legislation and regulation to ensure that the fundamental human right of access to sanitation is realized.

  2. Rolling Process Modeling Report: Finite-Element Prediction of Roll Separating Force and Rolling Defects

    Energy Technology Data Exchange (ETDEWEB)

    Soulami, Ayoub [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Paxton, Dean M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burkes, Douglas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-04-23

    Pacific Northwest National Laboratory (PNNL) has been investigating manufacturing processes for the uranium-10% molybdenum (U-10Mo) alloy plate-type fuel for the U.S. high-performance research reactors. This work supports the Convert Program of the U.S. Department of Energy’s National Nuclear Security Administration (DOE/NNSA) Global Threat Reduction Initiative. This report documents modeling results of PNNL’s efforts to perform finite-element simulations to predict roll separating forces and rolling defects. Simulations were performed using a finite-element model developed using the commercial code LS-Dyna. Simulations of the hot rolling of U-10Mo coupons encapsulated in low-carbon steel have been conducted following two different schedules. Model predictions of the roll-separation force and roll-pack thicknesses at different stages of the rolling process were compared with experimental measurements. This report discusses various attributes of the rolled coupons revealed by the model (e.g., dog-boning and thickness non-uniformity).

  3. Naming patterns reveal cultural values: patronyms, matronyms, and the U.S. culture of honor.

    Science.gov (United States)

    Brown, Ryan P; Carvallo, Mauricio; Imura, Mikiko

    2014-02-01

    Four studies examined the hypothesis that honor norms would be associated with a pronounced use of patronyms, but not matronyms, for naming children. Study 1 shows that men who endorse honor values expressed a stronger desire to use patronyms (but not matronyms) for future children, an association that was mediated by patriarchal attitudes. Study 2 presents an indirect method for assessing state patronym and matronym levels. As expected, patronym scores were significantly higher in honor states and were associated with a wide range of variables linked previously to honor-related dynamics. Study 3a shows that following the terrorist attacks of 9/11, patronyms increased in honor states, but not in non-honor states. Likewise, priming men with a fictitious terrorist attack (Study 3b) increased the association between honor ideology and patronym preferences. Together, these studies reveal a subtle social signal that reflects the masculine values of an honor culture.

  4. Systematics of constant roll inflation

    Science.gov (United States)

    Anguelova, Lilia; Suranyi, Peter; Wijewardhana, L. C. R.

    2018-02-01

    We study constant roll inflation systematically. This is a regime, in which the slow roll approximation can be violated. It has long been thought that this approximation is necessary for agreement with observations. However, recently it was understood that there can be inflationary models with a constant, and not necessarily small, rate of roll that are both stable and compatible with the observational constraint ns ≈ 1. We investigate systematically the condition for such a constant-roll regime. In the process, we find a whole new class of inflationary models, in addition to the known solutions. We show that the new models are stable under scalar perturbations. Finally, we find a part of their parameter space, in which they produce a nearly scale-invariant scalar power spectrum, as needed for observational viability.

  5. Grease lubrication in rolling bearings

    CERN Document Server

    Lugt, Piet M

    2012-01-01

    The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal

  6. Rolling Resistance Measurement and Model Development

    DEFF Research Database (Denmark)

    Andersen, Lasse Grinderslev; Larsen, Jesper; Fraser, Elsje Sophia

    2015-01-01

    There is an increased focus worldwide on understanding and modeling rolling resistance because reducing the rolling resistance by just a few percent will lead to substantial energy savings. This paper reviews the state of the art of rolling resistance research, focusing on measuring techniques, s......, surface and texture modeling, contact models, tire models, and macro-modeling of rolling resistance...

  7. Committed to the Honor Code: An Investment Model Analysis of Academic Integrity

    Science.gov (United States)

    Dix, Emily L.; Emery, Lydia F.; Le, Benjamin

    2014-01-01

    Educators worldwide face challenges surrounding academic integrity. The development of honor codes can promote academic integrity, but understanding how and why honor codes affect behavior is critical to their successful implementation. To date, research has not examined how students' "relationship" to an honor code predicts…

  8. Centauri High School Teacher Honored as Colorado Outstanding Biology

    Science.gov (United States)

    Teacher Centauri High School Teacher Honored as Colorado Outstanding Biology Teacher For more information contact: e:mail: Public Affairs Golden, Colo., May 2, 1997 -- Tracy Swedlund, biology teacher at Centauri High School in LaJara, was selected as Colorado's 1997 Outstanding Biology Teacher and will be

  9. Laboratories for Educational Innovation: Honors Programs in the Netherlands

    Science.gov (United States)

    Wolfensberger, Marca V. C.; Van Eijl, Pierre; Pilot, Albert

    2012-01-01

    In Dutch universities, honors programs are a fast growing development. The first such programs started in 1993. Twenty years later a large number of programs are implemented at nearly all research universities and also at many universities of applied sciences in the Netherlands. Recent data have revealed significant diversity in the types and…

  10. An Honors Interdisciplinary Community-Based Research Course

    Science.gov (United States)

    Dunbar, David; Terlecki, Melissa; Watterson, Nancy; Ratmansky, Lisa

    2013-01-01

    This article describes how two faculty members at Cabrini College--one from biology and the other from psychology--incorporated interdisciplinary community-based research in an honors course on environmental watershed issues. The course, Environmental Psychology, was team-taught in partnership with a local watershed organization, the Valley Creek…

  11. Mentors, Muses, and Mutuality: Honoring Barbara Snell Dohrenwend

    Science.gov (United States)

    Mulvey, Anne

    2012-01-01

    I describe feminist community psychology principles that have the potential to expand and enrich mentoring and that honor Barbara Snell Dohrenwend, a leader who contributed to the research, theory, and profession of community psychology. I reflect on the affect that Barbara Dohrenwend had on life and on the development of feminist community…

  12. Codes, Ciphers, and Cryptography--An Honors Colloquium

    Science.gov (United States)

    Karls, Michael A.

    2010-01-01

    At the suggestion of a colleague, I read "The Code Book", [32], by Simon Singh to get a basic introduction to the RSA encryption scheme. Inspired by Singh's book, I designed a Ball State University Honors Colloquium in Mathematics for both majors and non-majors, with material coming from "The Code Book" and many other sources. This course became…

  13. Laboratories for educational innovation: honors programs in the Netherlands

    NARCIS (Netherlands)

    Wolfensberger, Marca; van Eijl, Pierre; Pilot, Albert

    2012-01-01

    In Dutch universities, honors programs are a fast growing development. The first such programs started in 1993. Twenty years later a large number of programs are implemented at nearly all research universities and also at many universities of applied sciences in the Netherlands. Recent data have

  14. The Gifted and Honors Program at Ridgeroad Jr. High.

    Science.gov (United States)

    Moody, Bonnie

    1984-01-01

    Describes a science program for honors students that offers a blend of both teacher-directed and student-directed activities. Includes information on instructional strategies used, independent student study projects, financial considerations, grading, and student reaction to the program. (JN)

  15. Research Center Renaming Will Honor Senator Domenici

    Science.gov (United States)

    2008-05-01

    New Mexico Tech and the National Radio Astronomy Observatory (NRAO) will rename the observatory's research center on the New Mexico Tech campus to honor retiring U.S. Senator Pete V. Domenici in a ceremony on May 30. The building that serves as the scientific, technical, and administrative center for the Very Large Array (VLA) and Very Long Baseline Array (VLBA) radio telescopes will be named the "Pete V. Domenici Science Operations Center." The building previously was known simply as the "Array Operations Center." Sen. Pete V. Domenici Sen. Pete V. Domenici "The new name recognizes the strong and effective support for science that has been a hallmark of Senator Domenici's long career in public service," said Dr. Fred Lo, NRAO Director. New Mexico Tech President Daniel H. Lopez said Sen. Domenici has always been a supporter of science and research in Socorro and throughout the state. "He's been a statesman for New Mexico, the nation -- and without exaggeration -- for the world," Lopez said. "Anyone with that track record deserves this recognition." Van Romero, Tech vice president of research and economic development, has served as the university's main lobbyist in Washington, D.C., for more than a decade. He said Sen. Domenici has always been receptive to new ideas and willing to take risks. "Over the years, Sen. Domenici has always had time to listen to our needs and goals," Romero said. "He has served as a champion of New Mexico Tech's causes and we owe him a debt of gratitude for all his efforts over the decades." Originally dedicated in 1988, the center houses offices and laboratories that support VLA and VLBA operations. The center also supports work on the VLA modernization project and on the international Atacama Large Millimeter/submillimeter Array (ALMA) project. Work on ALMA at the Socorro center and at the ALMA Test Facility at the VLA site west of Socorro has focused on developing and testing equipment to be deployed at the ALMA site in Chile's Atacama

  16. School environment and sanitation in rural India

    Directory of Open Access Journals (Sweden)

    J P Majra

    2010-01-01

    Full Text Available Context : A school child educated about the benefits of sanitation and good hygiene behavior is a conduit for carrying those messages far beyond the school walls, bringing lasting improvement to community hygienic practices. Aims : To study the status of school environment and sanitation in rural India. Settings and Design: Government schools in rural Karnataka, cross sectional study. Materials and Methods: Twenty schools were randomly selected for the study. Informed consent was taken from the Heads of the schools. A pre tested close ended questionnaire was used to get the information. The minimum standards for sanitation of the school and its environment in India were used as the guiding principles to evaluate the appropriateness/ adequacy of the various attributes. Statistical analysis used: Percentages and proportions. Results : Out of 20 schools selected, one fourth of the schools were located/ sited at inappropriate places. Only half of the schools had appropriate/ adequate structure. Eighteen (90% of the schools were overcrowded. Ventilation and day light was adequate for 12(60% and 14(70% of the schools respectively. Cleanliness of school compound/classrooms was adequate in 80% of the schools. There were no separate rooms for serving the midday meals in any of the schools under study. Eighteen (90% of the schools were having drinking water points. Liquid and solid waste disposal was insanitary in six (30% and eight (40% of the schools respectively. Only half of the schools had adequate latrines for boys and 60% for girls. Only two (10% of the schools had adequate hand washing points with soap. Conclusions : Environment and sanitation facilities at many of the schools are not fully satisfactory.

  17. Rethinking Sustainable Sanitation for the Urban Domain

    OpenAIRE

    Norström, A; Mcconville, Jennifer; Lüthi, C; Panesar, Arne

    2010-01-01

    Climate change, diminishing natural resources and rural-urban demographic trends will have profound impacts on future urban infrastructure delivery in both developed and developing countries. These challenges will however, leverage new opportunities for circular urban economies in which productive sanitation will play an important role in both the North and South. In the developed world, the challenge is to initiate a transition from disposal oriented, water-based infrastructure regimes towar...

  18. History and Technology of Terra Preta Sanitation

    Directory of Open Access Journals (Sweden)

    Sabino De Gisi

    2014-03-01

    Full Text Available In order to reach the Millennium Development Goals for significantly reducing the number of people without access to adequate sanitation, new holistic concepts are needed focusing on economically feasible closed-loop ecological sanitation systems rather than on expensive end-of-pipe technologies. An analysis of a former civilization in the Amazon (nowadays Brazil highlights the possibility to close the loop with a more sustainable lifestyle integrating soil fertility, food security, waste management, water protection and sanitation, renewable energy. Terra Preta do Indio is the anthropogenic black soil produced by ancient cultures through the conversion of bio-waste, fecal matter and charcoal into long-term fertile soils. These soils have maintained high amounts of organic carbon several thousand years after they were abandoned. Deriving from these concepts, Terra Preta Sanitation (TPS has been re-developed and adopted. TPS includes urine diversion, addition of a charcoal mixture and is based on lactic-acid-fermentation with subsequent vermicomposting. Lacto-fermentation is a biological anaerobic process that generates a pre-stabilization of the mixture. The main advantage of lacto-fermentation is that no gas and no odor is produced. What makes it particularly interesting for in-house systems even in urban areas. Instead, vermicomposting is an aerobic decomposition process of the pre-digested materials by the combined action of earthworms and microorganisms. It transforms the carbon and nutrients into the deep black, fertile and stable soil that can be utilized in agriculture. No water, ventilation or external energy is required. Starting from ancient Amazonian civilizations traditional knowledge, the aim of this work is to present TPS systems adopted nowadays.

  19. The effect of roll gap geometry on microstructure in cold-rolled aluminum

    DEFF Research Database (Denmark)

    Mishin, Oleg; Bay, B.; Winther, G.

    2004-01-01

    Microstructure and texture are analyzed through the thickness of two aluminum plates cold-rolled 40% with different roll gap geometries. It is found that both texture and microstructure are strongly affected by the rolling geometry. After rolling with intermediate-size draughts a rolling-type tex......Microstructure and texture are analyzed through the thickness of two aluminum plates cold-rolled 40% with different roll gap geometries. It is found that both texture and microstructure are strongly affected by the rolling geometry. After rolling with intermediate-size draughts a rolling...... layers. In these layers, extended planar dislocation boundaries are frequently found to be inclined closely to the rolling direction. The subsurface and central layers of this plate exhibit microstructures similar to those in the plate rolled with intermediate draughts. It is suggested...

  20. A conceptual model of people's approach to sanitation

    International Nuclear Information System (INIS)

    Avvannavar, Santosh M.; Mani, Monto

    2008-01-01

    Sanitation is a term primarily used to characterize the safe and sound handling (and disposal) of human excreta - or simply, people's approach to take-care of their (unavoidable) primal urge. According to the recent Human Development Report 2006 Global access to proper sanitation stands at approximately 58% with 37% being a conservative estimate both for South Asia and Sub-Saharan Africa. Various multi-million dollar sanitation programmes the world over have had little success, often due to inadequate understanding of people's sanitation approach. Sanitation approach includes the perception, feel and practices involved in satisficing the primal need to defecate and urinate (and their disposal). This paper presents a structure to understand the nature of psycho-socio-economic influences that determine societal approach to sanitation. Societies across the globe have evolved imbibing diverse influences attributed to the local environment, religion, cultural practices, war, etc. While a civilization's living environment reflects these influences in their built-environment characteristics, the influences are often deep-rooted and can be traced to the way the community members satisfice their need to defecate and urinate (sanitation approach). The objective of this paper is to trace the various approaches that diverse societies/civilizations, over time, across the world have had towards sanitation, and present a structure to articulate and understand determining factors. Sanitation also involves other domestic (solid and liquid) waste disposal but in the context of this paper the scope of sanitation has been restricted to human excreta alone. The structure presented and discussed in this paper would be useful in understanding a community better in terms of providing appropriate sanitation. It is hoped that this structure be considered as a basis for further refinement and detailed research into each of the factors determining people's sanitation approach

  1. KfW Water Symposium 2009 : Financing Sanitation

    OpenAIRE

    KfW Development Bank

    2010-01-01

    "The central objective of the International Year of Sanitation was to put the global community on track to achieve the Millennium Development Goals MDG sanitation target. However, one year later, it is still difficult to keep sanitation high on the agenda, while practical action is required to encourage demand driven and sustainable solutions. With the support of the German Ministry for Development and Cooperation and together with the European Investment Bank EIB and the French Developm...

  2. Hot rolling of thick uranium molybdenum alloys

    Science.gov (United States)

    DeMint, Amy L.; Gooch, Jack G.

    2015-11-17

    Disclosed herein are processes for hot rolling billets of uranium that have been alloyed with about ten weight percent molybdenum to produce cold-rollable sheets that are about one hundred mils thick. In certain embodiments, the billets have a thickness of about 7/8 inch or greater. Disclosed processes typically involve a rolling schedule that includes a light rolling pass and at least one medium rolling pass. Processes may also include reheating the rolling stock and using one or more heavy rolling passes, and may include an annealing step.

  3. Interdisciplinary Water and Sanitation Project in Burkina Faso

    OpenAIRE

    船水, 尚行

    2017-01-01

    Interdisciplinary project on water and sanitation was performed in Burkina Faso from 2010 to 2015. The title of the project was “Development of sustainable water and sanitation systems in the African Sahel region”, and the project was supported by SATREPS (JST and JICA) and collaborated with International Institute of Water and Sanitation (2iE). The main purpose of the project was to develop and demonstrate the new system of water and sanitation based on the concept of “do not mix” and “do no...

  4. Robust Rudder Roll Damping Control

    DEFF Research Database (Denmark)

    Yang, C.

    The results of a systematic research to solve a specific ship motion control problem, simultaneous roll damping and course keeping using the rudder are presented in this thesis. The fundamental knowledge a priori is that rudder roll damping is highly sensitive to the model uncertainty, therefore H-infinity...... theory is used to deal with the problem. The necessary mathematical tools and the H-Infinity theory as the basis of controller design are presented in Chapter 2 and 3. The mu synthesis and the D-K iteration are introduced in Chapter 3. The ship dynamics and modeling technology are discussed in Chapter 4...

  5. The effect of roll with passive segment on the planetary rolling process

    Directory of Open Access Journals (Sweden)

    Qing-Ling Zeng

    2015-03-01

    Full Text Available In three-roll planetary rolling process, there is secondary torsion phenomenon that may lead to rolling instability. This article proposed a new idea to alleviate the secondary torsion phenomenon by dividing the secondary torsion segment out of the roll as an independent and passive one. To study the performance of the roll with passive segment, the three-dimensional finite element models of planetary rolling process using actual roll or new roll with passive segment involving elastic–plastic and thermal–mechanical coupling were established by the software ABAQUS/Explicit, and a series of analysis had been done successfully. The rolling temperature and rolling force of planetary mill were in good agreement with the measured results, which indicated that the finite element method would supply important reference merit for three-dimensional thermo-mechanical simulation of the three-roll planetary rolling process. Comparing the simulation results of the two models, the results indicated that the change in the roll structure had just a little influence on the metal deformation, temperature, and rolling force, but it lessened the secondary torsion deformation effectively and improved the outside roundness of the rolled tube slightly. The research provided a new idea for the roll design of three-roll planetary mill (PSW.

  6. Developing Trustworthy Commissioned Officers: Transcending the Honor Codes and Concept

    Science.gov (United States)

    2012-10-01

    prima   facie  evidence  that  one  has  been  honorable.  This  assumption  is...the   staff   and   faculty   at   each   commissioning   source  have  an   obligation   to   show  Cadets,  Midshipmen...and belief in the competency, character, and commitment of an institution, organization, group, or individual to fulfill obligations and

  7. Career and Technology Center Honors Julie Hartman | Poster

    Science.gov (United States)

    By Carolynne Keenan, Contributing Writer On May 7, Julie Hartman was honored by the Frederick County Career and Technology Center (CTC) for her support of the CTC’s Biomedical Sciences Program. As an education program specialist for Outreach and Special Programs at NCI at Frederick, Hartman is responsible for NCI at Frederick’s participation in the program, which is designed to offer Frederick County high school students hands-on, practical laboratory experience beyond the typical classroom setting. 

  8. Beliefs, Behaviors, and Perceptions of Community-Led Total Sanitation and Their Relation to Improved Sanitation in Rural Zambia

    Science.gov (United States)

    Joseph Lawrence, J.; Yeboah-Antwi, Kojo; Biemba, Godfrey; Ram, Pavani K.; Osbert, Nicolas; Sabin, Lora L.; Hamer, Davidson H.

    2016-01-01

    Inadequate hygiene and sanitation remain leading global contributors to morbidity and mortality in children and adults. One strategy for improving sanitation access is community-led total sanitation (CLTS), in which participants are guided into self-realization of the importance of sanitation through activities called “triggering.” This qualitative study explored community members' and stakeholders' sanitation, knowledge, perceptions, and behaviors during early CLTS implementation in Zambia. We conducted 67 in-depth interviews and 24 focus group discussions in six districts in Zambia 12–18 months after CLTS implementation. Triggering activities elicited strong emotions, including shame, disgust, and peer pressure, which persuaded individuals and families to build and use latrines and handwashing stations. New sanitation behaviors were also encouraged by the hierarchical influences of traditional leaders and sanitation action groups and by children's opinions. Poor soil conditions were identified as barriers to latrine construction. Taboos, including prohibition of different generations of family members, in-laws, and opposite genders from using the same toilet, were barriers for using sanitation facilities. CLTS, through community empowerment and ownership, produced powerful responses that encouraged construction and use of latrines and handwashing practices. These qualitative data suggest that CLTS is effective for improving sanitation beliefs and behaviors in Zambia. PMID:26787149

  9. Rolling motion in moving droplets

    Indian Academy of Sciences (India)

    motions. The two limits of a thin sheet-like drop in sliding motion on a surface, and a spherical drop in roll, have been extensively .... rigid body rotation. The solid body rotation makes sense in the context of small Reynolds. (Re) number flows ...

  10. [The Amazon Sanitation Plan (1940-1942)].

    Science.gov (United States)

    Andrade, Rômulo de Paula; Hochman, Gilberto

    2007-12-01

    The article addresses the Amazon Sanitation Plan and the political context in which it was formulated between 1940 and 1941. It examines the role of Getúlio Vargas, the activities of the plan's main protagonists (such as Evandro Chagas, João de Barros Barreto, and Valério Konder), its key proposals, and its demise as of 1942 upon creation of the Special Public Health Service (Sesp), which grew out of cooperation agreements between Brazil and the US following both nations' involvement in World War II. A reproduction of the Plan as published in the Arquivos de Higiene in 1941 is included.

  11. [Water and sanitation in disaster situations.

    DEFF Research Database (Denmark)

    Jensen, Peter Kjær Mackie; Meyrowitsch, Dan Wolf; Konradsen, Flemming

    2010-01-01

    When implementing water and sanitation in a disaster situation, it is of crucial importance that the intervention is grounded in the local cultural and socioeconomic context. The assistance provided in the response phase should facilitate short and long-term recovery and sustainable development...... of the affected community. The new model for disaster management which comprises an integrated continuous risk reduction phase, calls for a cross-disciplinary approach which combines the known life-saving response methods with modern development practices. Udgivelsesdato: 2010-Jan...

  12. Maintenance Appointments in Railway Rolling Stock Rescheduling

    NARCIS (Netherlands)

    J.C. Wagenaar (Joris); L.G. Kroon (Leo); M.E. Schmidt (Marie)

    2016-01-01

    textabstractThis paper addresses the Rolling Stock Rescheduling Problem (RSRP), while taking maintenance appointments into account. After a disruption, the rolling stock of the disrupted passenger trains has to be rescheduled in order to restore a feasible rolling stock circulation. Usually, a

  13. Rolling block mazes are PSPACE-complete

    NARCIS (Netherlands)

    Buchin, K.; Buchin, M.

    2012-01-01

    In a rolling block maze, one or more blocks lie on a rectangular board with square cells. In most mazes, the blocks have size k × m × n where k, m, n are integers that determine the size of the block in terms of units of the size of the board cells. The task of a rolling block maze is to roll a

  14. Efficient Circulation of Railway Rolling Stock

    NARCIS (Netherlands)

    Alfieri, A.; Groot, R.; Kroon, L.G.; Schrijver, A.

    2006-01-01

    Railway rolling stock (locomotives, carriages, and train units) is one of the most significant cost sources for operatorsof passenger trains, both public and private. Rolling stock costsare due to material acquisition, power supply, and material maintenance. The efficient circulation of rolling

  15. Sanitation health risk and safety planning in urban residential ...

    African Journals Online (AJOL)

    The aim of this review paper was to determine the best sanitation health risk and safety planning approach for sustainable management of urban environment. This was achieved by reviewing the concept of sanitation safety planning as a tool. The review adopted exploratory research approach and used secondary data ...

  16. Assessment of community led total sanitation uptake in rural Kenya ...

    African Journals Online (AJOL)

    Background: Community Led Total Sanitation (CLTS) is an innovative community led drive to set up pit latrines in rural Kenya with an aim of promoting sustainable sanitation through behaviour change. It's a behaviour change approach based on social capital that triggers households to build pit latrines without subsidy.

  17. 78 FR 51728 - Fees for Sanitation Inspections of Cruise Ships

    Science.gov (United States)

    2013-08-21

    ... Sanitation Inspections of Cruise Ships AGENCY: Centers for Disease Control and Prevention (CDC), Department... for vessel sanitation inspections for Fiscal Year (FY) 2014. These inspections are conducted by HHS...-yearly inspections and, when necessary, re-inspection. DATES: These fees are effective October 1, 2013...

  18. Exposure-response relationship of neighbourhood sanitation and children's diarrhoea.

    Science.gov (United States)

    Jung, Youngmee Tiffany; Lou, Wendy; Cheng, Yu-Ling

    2017-07-01

    To assess the association of neighbourhood sanitation coverage with under-five children's diarrhoeal morbidity and to evaluate its exposure-response relationship. We used the Demographic and Health Surveys (DHS) of 29 developing countries in sub-Saharan Africa and South Asia, conducted between 2010 and 2014. The primary outcome was two-week incidence of diarrhoea in children under 5 years of age (N = 269014). We conducted three-level logistic regression analyses and applied cubic splines to assess the trend between neighbourhood-level coverage of improved household sanitation and diarrhoeal morbidity. A significant association between neighbourhood-level coverage of improved household sanitation and diarrhoeal morbidity (OR [95% CI] = 0.68 [0.62-0.76]) was found. Exposure-relationship analyses results showed improved sanitation coverage threshold at 0.6. We found marginal degree of association (OR [95% CI] = 0.82 [0.77-0.87]) below the threshold, which, beyond the threshold, sharply increased to OR of 0.44 (95% CI: 0.29-0.67) at sanitation coverage of 1 (i.e. neighbourhood-wide use of improved household sanitation). Similar exposure-response trends were identified for urban and rural subgroups. Our findings suggest that neighbourhood sanitation plays a key role in reducing diarrhoeal diseases and that increase in sanitation coverage may only have minimal impact on diarrhoeal illness, unless sufficiently high coverage is achieved. © 2017 John Wiley & Sons Ltd.

  19. Sanitation facilities and hygiene practices in a semi-urban ...

    African Journals Online (AJOL)

    Alasia Datonye

    Department of Community Medicine, University of Port Harcourt Teaching Hospital, Port. Harcourt, Nigeria. ... and they formed 87.95% of the 83 facilities found to be in ... Hygiene education and social marketing of sanitation facilities are ..... India and Brazil . ... sanitation facility; it has to be reiterated that greater emphasis.

  20. Multistakeholder Partnerships in the Water and Sanitation Sector ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Multistakeholder Partnerships in the Water and Sanitation Sector within Urban Policies in Latin America and the Caribbean. According to the Inter-American Development Bank (IDB), an estimated 7% of urban Latin Americans lack access to clean water and another 13%, to sanitation services. This project aims to ...

  1. 25 CFR 247.18 - What are the sanitation prohibitions?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false What are the sanitation prohibitions? 247.18 Section 247.18 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FISH AND WILDLIFE USE OF COLUMBIA RIVER TREATY FISHING ACCESS SITES § 247.18 What are the sanitation prohibitions? (a) You cannot deposit...

  2. 9 CFR 305.3 - Sanitation and adequate facilities.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Sanitation and adequate facilities. 305.3 Section 305.3 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF... OF VIOLATION § 305.3 Sanitation and adequate facilities. Inspection shall not be inaugurated if an...

  3. 36 CFR 1002.14 - Sanitation and refuse.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Sanitation and refuse. 1002.14 Section 1002.14 Parks, Forests, and Public Property PRESIDIO TRUST RESOURCE PROTECTION, PUBLIC USE AND RECREATION § 1002.14 Sanitation and refuse. (a) The following are prohibited: (1) Disposing of...

  4. Providing Sanitation for the Urban Poor in Uganda

    NARCIS (Netherlands)

    Okot-Okumu, J.; Oosterveer, P.J.M.

    2010-01-01

    After presenting background information on urbanization in Uganda, the chapter provides an overview of sanitation in the urban centres, where different social classes reside in separate zones. Factors determining sanitation provision and the use of sanitary facilities particularly in the informal

  5. Access and utilization of water and sanitation facilities and their ...

    African Journals Online (AJOL)

    Introduction: Lack of safe water, sanitation and hygiene remains one of the most pressing global health issues of our time. Water and sanitation-related improvements are crucial in meeting the Global Sustainable Development Goals. This study was conducted to determine the access, utilization, and determinants of access ...

  6. Occupational skin diseases and prevention among sanitation workers in China.

    Science.gov (United States)

    Yan, Yuehua; Wang, Xinggang; Wu, Jianbo; Xu, Li

    2015-09-01

    Little research has been focused on the health status or the occupational protection awareness of sanitation workers. The policy recommendations on the occupational safety and health of sanitation workers based on the scientific research are also insufficient in developing countries like China. To study the incidence of dermatoses and the relevance with occupational exposure, protection awareness and protective measures among sanitation workers for better management and protection of the sanitation workers. 273 sanitation workers and 113 administrative staff from 11 streets of Wuhan were recruited. Dermatological problems were evaluated and recorded by physical examination. Occupational exposure, protection awareness, the use of protective equipments and personal history of skin disease were assessed by questionnaires. Compared with administrative staff, sanitation workers had much more occupational dermatological problems and had a much higher rate of harmful ultraviolet ray exposure. Young sanitation workers were more aware of occupational self-protection and a relatively higher rate of them using protective equipments compared with old ones. Exposure to multiple health hazards and the poor use of protective equipments are related to skin diseases in sanitation workers. Prejob training of self-protection and the use of protective equipments are recommended.

  7. Addressing the Sanitation Challenge in Poor Urban Areas (East Africa)

    International Development Research Centre (IDRC) Digital Library (Canada)

    The World Health Organization (WHO) estimates that the global burden of disease could be reduced by up to 15% by improving water, sanitation and hygiene. Until recently, however, little attention has been paid to sanitation by national governments and the international community. For example, Kenya and Uganda have ...

  8. 36 CFR 2.14 - Sanitation and refuse.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Sanitation and refuse. 2.14 Section 2.14 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR RESOURCE PROTECTION, PUBLIC USE AND RECREATION § 2.14 Sanitation and refuse. (a) The following are...

  9. Improvement of Water and Sanitation Services : a Comparative ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This grant will support a pilot water and sanitation project that engages both the local community and the local government. The project will be informed by the findings of a field survey in Irbid, Jordan, which has similar cultural and demographic characteristics, and where water and sanitation provision has improved in ...

  10. Sanitization and Disposal of Excess Information Technology Equipment

    Science.gov (United States)

    2009-09-21

    Report No. D-2009-104 September 21, 2009 Sanitization and Disposal of Excess Information Technology Equipment...2009 2. REPORT TYPE 3. DATES COVERED 00-00-2009 to 00-00-2009 4. TITLE AND SUBTITLE Sanitization and Disposal of Excess Information Technology ...Defense (Networks and Information Integration)/DOD Chief Information Officer DRMS Defense Reutilization and Marketing Service IT Information

  11. Integrated Water, Sanitation and Solid Waste Management in Small ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Inadequate water and sanitation services are having an negative effect on human health and polluting Lake Victoria in East Africa. At the request of the governments of Kenya, Tanzania and Uganda, UN-Habitat has undertaken an initiative to provide water and sanitation services in the region and protect the Lake basin.

  12. 21 CFR 1240.95 - Sanitation of water boats.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Sanitation of water boats. 1240.95 Section 1240.95... DISEASES Source and Use of Potable Water § 1240.95 Sanitation of water boats. No vessel engaged in interstate traffic shall obtain water for drinking and culinary purposes from any water boat unless the tanks...

  13. Inactivation of human norovirus using chemical sanitizers.

    Science.gov (United States)

    Kingsley, David H; Vincent, Emily M; Meade, Gloria K; Watson, Clytrice L; Fan, Xuetong

    2014-02-03

    The porcine gastric mucin binding magnetic bead (PGM-MB) assay was used to evaluate the ability of chlorine, chlorine dioxide, peroxyacetic acid, hydrogen peroxide, and trisodium phosphate to inactivate human norovirus within 10% stool filtrate. One-minute free chlorine treatments at concentrations of 33 and 189 ppm reduced virus binding in the PGM-MB assay by 1.48 and 4.14 log₁₀, respectively, suggesting that chlorine is an efficient sanitizer for inactivation of human norovirus (HuNoV). Five minute treatments with 5% trisodium phosphate (pH~12) reduced HuNoV binding by 1.6 log₁₀, suggesting that TSP, or some other high pH buffer, could be used to treat food and food contact surfaces to reduce HuNoV. One minute treatments with 350 ppm chlorine dioxide dissolved in water did not reduce PGM-MB binding, suggesting that the sanitizer may not be suitable for HuNoV inactivation in liquid form. However a 60-min treatment with 350 ppm chlorine dioxide did reduce human norovirus by 2.8 log₁₀, indicating that chlorine dioxide had some, albeit limited, activity against HuNoV. Results also suggest that peroxyacetic acid has limited effectiveness against human norovirus, since 1-min treatments with up to 195 ppm reduced human norovirus binding by chlorine (sodium hypochlorite) as a HuNoV disinfectant wherever possible. Copyright © 2013. Published by Elsevier B.V.

  14. Bridging the sanitation gap between disaster relief and development.

    Science.gov (United States)

    Lai, Ka-Man; Ramirez, Claudia; Liu, Weilong; Kirilova, Darina; Vick, David; Mari, Joe; Smith, Rachel; Lam, Ho-Yin; Ostovari, Afshin; Shibakawa, Akifumi; Liu, Yang; Samant, Sidharth; Osaro, Lucky

    2015-10-01

    By interpreting disasters as opportunities to initiate the fulfilment of development needs, realise the vulnerability of the affected community and environment, and extend the legacy of relief funds and effort, this paper builds upon the concept linking relief, rehabilitation and development (LRRD) in the sanitation sector. It aims to use a composite of case studies to devise a framework for a semi-hypothetical scenario to identify critical components and generic processes for a LRRD action plan. The scenario is based on a latrine wetland sanitation system in a Muslim community. Several sub-frameworks are developed: (i) latrine design; (ii) assessment of human waste treatment; (iii) connective sanitation promotion strategy; and (iv) ecological systems and environmental services for sanitation and development. This scenario illustrates the complex issues involved in LRRD in sanitation work and provides technical notes and references for a legacy plan for disaster relief and development. © 2015 The Author(s). Disasters © Overseas Development Institute, 2015.

  15. Towards roll-to-roll manufacturing of polymer photonic devices

    Science.gov (United States)

    Subbaraman, Harish; Lin, Xiaohui; Ling, Tao; Guo, L. Jay; Chen, Ray T.

    2014-03-01

    Traditionally, polymer photonic devices are fabricated using clean-room processes such as photolithography, e-beam lithography, reactive ion etching (RIE) and lift-off methods etc, which leads to long fabrication time, low throughput and high cost. We have utilized a novel process for fabricating polymer photonic devices using a combination of imprinting and ink jet printing methods, which provides high throughput on a variety of rigid and flexible substrates with low cost. We discuss the manufacturing challenges that need to be overcome in order to realize true implementation of roll-to-roll manufacturing of flexible polymer photonic systems. Several metrology and instrumentation challenges involved such as availability of particulate-free high quality substrate, development and implementation of high-speed in-line and off-line inspection and diagnostic tools with adaptive control for patterned and unpatterned material films, development of reliable hardware, etc need to be addressed and overcome in order to realize a successful manufacturing process. Due to extreme resolution requirements compared to print media, the burden of software and hardware tools on the throughput also needs to be carefully determined. Moreover, the effect of web wander and variations in web speed need to accurately be determined in the design of the system hardware and software. In this paper, we show the realization of solutions for few challenges, and utilizing these solutions for developing a high-rate R2R dual stage ink-jet printer that can provide alignment accuracy of web speed of 5m/min. The development of a roll-to-roll manufacturing system for polymer photonic systems opens limitless possibilities for the deployment of high performance components in a variety of applications including communication, sensing, medicine, agriculture, energy, lighting etc.

  16. Design of a Small Scale Roll to Roll Device

    OpenAIRE

    Pereira, Amon A; White, Edward; Kramer, Rebecca Krone

    2014-01-01

    In the soft robotics field, hyperelastic polymer films are used in conjunction with eutectic gallium indium to create flexible strain gages. However, rapid large scale manufacturing methods of such sensors have yet to be developed. Developing new manufacturing methods will allow for researchers to build and test new soft sensor concepts faster but also pave the way for future mass-production of these sensors for consumer or industrial consumption. One of those methods would be a Roll to...

  17. Perovskite solar cells for roll-to-roll fabrication

    Directory of Open Access Journals (Sweden)

    Uddin Ashraf

    2017-01-01

    Full Text Available Perovskite solar cell (PSCs is considered as the game changer in emerging photovoltaics technology. The highest certified efficiency is 22% with high temperature processed (∼500 °C TiO2 based electron transport layer (ETL. High temperature process is a rudimentary hindrance towards roll-to-roll processing of PSCs on flexible substrates. Low temperature solution process (<150 °C ZnO based ETL is one of the most promising candidate for large scale roll-to-roll fabrication of cells as it has nearly identical electron affinity (4.2 eV of TiO2. The mixed organic perovskite (MA0.6FA0.4PbI3 devices with Al doped ZnO (AZO ETL demonstrate average cell efficiency over 16%, which is the highest ever reported efficiency for this device configuration. The energy level alignment and related interfacial charge transport dynamics at the interface of ZnO and perovskite films and the adjacent charge transport layers are investigated. Significantly improved device stability, hysteresis free device photocurrent have been observed in MA0.6FA0.4PbI3 cells. A systematic electrochemical impedance spectroscopy, frequency dependent capacitance spectra, surface morphology and topography characterization have been conducted to understand the role of interfacial electronic properties between perovskite and neighbouring layers in perovskite device. A standardized degradation study, interfacial electronic property and capacitive spectra analysis of aged device, have been measured to understand the enhanced device stability in mixed MA0.6FA0.4PbI3 cells. Slow perovskite material decomposition rate and augmented device lifetime with AZO based devices have been found to be correlated with the more hydrophobic and acidic nature of AZO surface compared to pristine ZnO film.

  18. On the constant-roll inflation

    Science.gov (United States)

    Yi, Zhu; Gong, Yungui

    2018-03-01

    The primordial power spectra of scalar and tensor perturbations during slow-roll inflation are usually calculated with the method of Bessel function approximation. For constant-roll or ultra slow-roll inflation, the method of Bessel function approximation may be invalid. We compare the numerical results with the analytical results derived from the Bessel function approximation, and we find that they differ significantly on super-horizon scales if the constant slow-roll parameter ηH is not small. More accurate method is needed for calculating the primordial power spectrum for constant-roll inflation.

  19. Sanitation policy and spatial planning in urban East Africa: Diverging sanitation spaces and actor arrangements in Kampala and Kisumu

    NARCIS (Netherlands)

    Letema, S.C.; Vliet, van B.J.M.; Lier, van J.B.

    2014-01-01

    This paper discusses sanitation policies and spatial planning in Kampala (Uganda) and Kisumu (Kenya) from colonial times to date and their implications for the sitting of sanitation technologies and involving actors. During colonial times, a strict spatial duality was maintained between immigrants

  20. Improved Dutch Roll Approximation for Hypersonic Vehicle

    Directory of Open Access Journals (Sweden)

    Liang-Liang Yin

    2014-06-01

    Full Text Available An improved dutch roll approximation for hypersonic vehicle is presented. From the new approximations, the dutch roll frequency is shown to be a function of the stability axis yaw stability and the dutch roll damping is mainly effected by the roll damping ratio. In additional, an important parameter called roll-to-yaw ratio is obtained to describe the dutch roll mode. Solution shows that large-roll-to-yaw ratio is the generate character of hypersonic vehicle, which results the large error for the practical approximation. Predictions from the literal approximations derived in this paper are compared with actual numerical values for s example hypersonic vehicle, results show the approximations work well and the error is below 10 %.

  1. Tachyon constant-roll inflation

    Science.gov (United States)

    Mohammadi, A.; Saaidi, Kh.; Golanbari, T.

    2018-04-01

    The constant-roll inflation is studied where the inflaton is taken as a tachyon field. Based on this approach, the second slow-roll parameter is taken as a constant which leads to a differential equation for the Hubble parameter. Finding an exact solution for the Hubble parameter is difficult and leads us to a numerical solution for the Hubble parameter. On the other hand, since in this formalism the slow-roll parameter η is constant and could not be assumed to be necessarily small, the perturbation parameters should be reconsidered again which, in turn, results in new terms appearing in the amplitude of scalar perturbations and the scalar spectral index. Utilizing the numerical solution for the Hubble parameter, we estimate the perturbation parameter at the horizon exit time and compare it with observational data. The results show that, for specific values of the constant parameter η , we could have an almost scale-invariant amplitude of scalar perturbations. Finally, the attractor behavior for the solution of the model is presented, and we determine that the feature could be properly satisfied.

  2. Essays on the future in honor of Nick Metropolis

    CERN Document Server

    Rota, Gian-Carlo

    2000-01-01

    This collection represents a unique undertaking in scientific publishing to honor Nick Metropolis. Nick was the last survivor of the World War II Manhattan Project in Los Alamos, and was an important member of the Los Alamos national Laboratory until his death in October, 1999. In this volume, some of the leading scientists and humanists of our time have contributed essays related to their respective disciplines, exploring various aspects of future developments in science and society, philosophy, national security, nuclear power, pure and applied mathematics, physics and biology, particle physics, computing, and information science.

  3. Puelles romero, Luis: Honoré Daumier: la risa republicana

    Directory of Open Access Journals (Sweden)

    Óscar Ortega Ruiz

    2015-01-01

    Full Text Available Recientemente, Abada Editores ha puesto a disposición de sus lectores el nuevo ensayo de Luis Puelles Romero, titular de Estética y Teoría de las Artes de la Universidad de Málaga. Honoré Daumier: la risa republicana se interna en la vida y la obra de este marsellés nacido en 1808 y muerto en París en 1879, cuyo trabajo se desarrolló durante cincuenta años decisivos de la historia de Francia, desde el final del periodo legitimista hasta los inicios de la III República.

  4. The use of detergents and sanitizers in dairy farm sanitation--an updated perspective.

    Science.gov (United States)

    Gilbert, P H

    1982-06-01

    Raw milk quality in South Africa is poor and standard plate counts in the millions per ml are common. This is largely due to inefficient cleaning and sanitizing of dairy equipment. The basic constituents in milk are described and various soils are classified as soluble in water, alkali, acid, solvent or surfactant or as insoluble. The importance of water quality is highlighted and the influence of mineral salts on soil deposition described. Dairy detergents are broadly classified as alkaline or acid, the former being most effective against fatty and proteinaceous soils and the latter effective against mineral salts. Typical detergent ingredients and their properties are described. Chlorine is incorporated into alkaline detergents not as a sanitizing agent, but as a peptizing agent to aid in protein soil removal. At high pH values the antimicrobial activity of chlorine is greatly diminished. The use of a daily acidified rinse (pH 3,0-5,0) is preferred to the periodic acid wash, since the acid rinse prevents mineral deposition rather than removing accumulated milkstone. All cleaning programmes follow the same fundamental steps--Pre-rinse (40-50 degrees C), wash (60-70 degrees C), rinse (pH 3,0-5,0) and sanitize (25 ppm iodine and 100 ppm chlorine). Farms following such a programme are able to achieve Standard Plate Counts of less than 10,000/ml and coliform counts of less than 10/ml for raw milk.

  5. A study of access to sanitation profiles of rural upland and coastal ...

    African Journals Online (AJOL)

    In developing countries, e.g., Nigeria, several communities have limited access to sanitation and sanitation facilities, thus such communities dump their solid and liquid wastes indiscriminately. The aim of this study was to assess access to sanitation, and compare basic sanitation facilities between upland and coastal ...

  6. Assessing Women’s Negative Sanitation Experiences and Concerns: The Development of a Novel Sanitation Insecurity Measure

    Directory of Open Access Journals (Sweden)

    Bethany A. Caruso

    2017-07-01

    Full Text Available Lack of access to acceptable sanitation facilities can expose individuals, particularly women, to physical, social, and mental health risks. While some of the challenges have been documented, standard metrics are needed to determine the extent to which women have urination- and defecation-related concerns and negative experiences. Such metrics also are needed to assess the effectiveness of interventions to mitigate them. We developed a sanitation insecurity measure to capture the range and frequency of women’s sanitation-related concerns and negative experiences. Research was conducted in rural Odisha, India with women across various life course stages to reflect a range of perspectives. This paper documents the mixed data collection methods and the exploratory and confirmatory factor analyses we employed to arrive at a final measure. The final sanitation insecurity measure includes 50 items across seven factors that reflect the physical environment, the social environment, and individual-level constraints. Most factor scores were significantly higher for unmarried women and for women who lacked access to functional latrines, indicating social and environmental influence on experiences. This measure will enable researchers to evaluate how sanitation insecurity affects health and to determine if and how sanitation interventions ameliorate women’s concerns and negative experiences associated with sanitation.

  7. Honor, Dignidad y Reciprocidad Honra, dignidade e reciprocidade

    Directory of Open Access Journals (Sweden)

    Luís R. Cardoso de Oliveira

    2004-12-01

    Full Text Available El texto discute la articulación entre las nociones de honor, dignidad y reciprocidad en los procesos de resolución de disputas, teniendo como foco los juzgados de pequeñas causas. El papel del don es destacado en la comprensión de las diputas, cuya resolución demanda el examen de tres dimensiones temáticas: los derechos, los intereses y el reconocimiento. Esta última dimensión está asociada a la visibilización del insulto moral, caracterizado como una agresión a derechos de difícil procesamiento en el ámbito judicial.The text discusses how notions of honor, dignity and reciprocity articulate in processes of dispute resolution, focusing in small claims courts. The role of the gift is highlighted in the understanding of disputes whose equation demands the examination of three thematic dimensions: rights, interests and recognition. The latter is associated to the visibility of moral insults, which are characterized as aggressions to rights that are frequently excluded from judicial processes.

  8. Fluid management in roll-to-roll nanoimprint lithography

    Science.gov (United States)

    Jain, A.; Bonnecaze, R. T.

    2013-06-01

    The key process parameters of UV roll-to-roll nanoimprint lithography are identified from an analysis of the fluid, curing, and peeling dynamics. The process includes merging of droplets of imprint material, curing of the imprint material from a viscous liquid to elastic solid resist, and pattern replication and detachment of the resist from template. The time and distances on the web or rigid substrate over which these processes occur are determined as function of the physical properties of the uncured liquid, the cured solid, and the roller configuration. The upper convected Maxwell equation is used to model the viscoelastic liquid and to calculate the force on the substrate and the torque on the roller. The available exposure time is found to be the rate limiting parameter and it is O(√Rho /uo), where R is the radius of the roller, ho is minimum gap between the roller and web, and uo is the velocity of the web. The residual layer thickness of the resist should be larger than the gap between the roller and the substrate to ensure complete feature filling and optimal pattern replication. For lower residual layer thickness, the droplets may not merge to form a continuous film for pattern transfer.

  9. Setting Them Free: Students as Co-Producers of Honors Education

    Science.gov (United States)

    van Gorp, Bouke; Wolfensberger, Marca V. C.; de Jong, Nelleke

    2012-01-01

    While the attractions and advantages of freedom that differentiates honors education from regular teaching are both theoretically and practically significant, the authors' experience at Utrecht University in the Netherlands has demonstrated drawbacks that need to be addressed and resolved in creating effective honors education. Freedom poses…

  10. The Relationship between High School Math Courses, High School GPA, and Retention of Honors Scholarships

    Science.gov (United States)

    Megert, Diann Ackerman

    2005-01-01

    This research examined the high school transcripts of honors scholarship recipients to identify a better criterion for awarding scholarships than high school grade point average (GPA) alone. Specifically, this study compared the honors scholarship retention rate when the scholarship was awarded based on completed advanced high school math classes…

  11. NREL Senior Research Fellow Honored by The Journal of Physical Chemistry |

    Science.gov (United States)

    News | NREL 7 » NREL Senior Research Fellow Honored by The Journal of Physical Chemistry News Release: NREL Senior Research Fellow Honored by The Journal of Physical Chemistry January 10, 2007 The Journal of Physical Chemistry B. The Dec. 21 issue was titled The Arthur J. Nozik Festschrift (Volume 110

  12. A sanitation technology demonstration centre to enhance decision making in South Africa

    CSIR Research Space (South Africa)

    Duncker, Louiza C

    2013-07-01

    Full Text Available International Conference, Nakuru, Kenya, 2013 DELIVERING WATER, SANITATION AND HYGIENE SERVICES IN AN UNCERTAIN ENVIRONMENT A sanitation technology demonstration centre to enhance decision making in South Africa L.C. Duncker, South Africa... for Water Services in South Africa (SFWS) defines basic sanitation services as the provision of a basic sanitation facility, the sustainable operation of this facility and the communication of good sanitation, hygiene and related practices. However...

  13. The real time rolling shutter

    OpenAIRE

    Monaghan, David; O'Connor, Noel E.; Cleary, Anne; Connolly, Denis

    2015-01-01

    From an early age children are often told either, you are creative you should do art but stay away from science and maths. Or that you are mathematical you should do science but you're not that creative. Compounding this there also exist some traditional barriers of artistic rhetoric that say, "don't touch, don't think and don't be creative, we've already done that for you, you can just look...". The Real Time Rolling Shutter is part of a collaborative Art/Science partnership whose core tenet...

  14. Grooved tube plug rolls in

    International Nuclear Information System (INIS)

    Krausser, P.

    1991-01-01

    The removable plugs used to date by the Power Generation Group (KWU) of Siemens to seal defective steam generator tubes have a good track record. Their sealing principle is based on the elastic tensioning of three seal disks against the inside wall of the tube. Now a further removable plug is available -a roll-in plug with a metal-coated surface. It is particularly suitable for use in the roller-expanded zone of the tubes at the tube sheet. The plugs can be used in both Siemens-KWU steam generators and in steam generators manufactured in compliance with the guidelines of the ASME Code. (author)

  15. ROLL OUT THE TALENT : Final project report

    OpenAIRE

    Eerola, Tuomas; Tuominen, Pirjo; Hakkarainen, Riitta-Liisa; Laurikainen, Marja; Mero, Niina

    2014-01-01

    The ROLL OUT THE TALENT project was born out of the desire to recognise and support the strengths of vocational students and to develop new and innovative operating models. ROLL OUT THE TALENT promoted regional cooperation between institutes and companies. The project produced operating and study path models that take into consideration the individual strengths of vocational students and the principles of lifelong learning. This is the final report of the ROLL OUT THE TALENT project, and ...

  16. How to integrate water, sanitation, and hygiene into HIV programmes

    National Research Council Canada - National Science Library

    Bery, Renuka; Rosenbaum, Julia

    2010-01-01

    "Water, sanitation and hygiene (WASH) practices are essential for maintaining health, yet most countries and donors have not included WASH in national policies and programmes for human immunodeficiency virus (HIV...

  17. Hygiene and sanitation among ethnic minorities in Northern Vietnam

    DEFF Research Database (Denmark)

    Rheinländer, Thilde; Samuelsen, Helle; Dalsgaard, Anders

    2010-01-01

    Improving sanitation and hygiene to prevent infectious diseases is of high priority in developing countries. This study attempts to gain in-depth understanding of hygiene and sanitation perceptions and practices among four Ethnic Minority Groups (EMGs) in a rural area of northern Vietnam. It is b......-based hygiene promotion is also recommended to curb dependency and spark initiatives in ethnic minority communities. Finally, interventions should focus on hygiene "software"--promoting hygiene behaviour changes known to effectively prevent hygiene related diseases.......Improving sanitation and hygiene to prevent infectious diseases is of high priority in developing countries. This study attempts to gain in-depth understanding of hygiene and sanitation perceptions and practices among four Ethnic Minority Groups (EMGs) in a rural area of northern Vietnam...

  18. Sanitation Health Risk and Safety Planning in Urban Residential ...

    African Journals Online (AJOL)

    Sultan

    affordable drinking-water and sanitation for ... systems are expensive and most communities in developing countries ... To appraise the techniques of sanitary risk assessment ..... contribution to decision making is limited to the extent that it can ...

  19. Privatization of Water and Sanitation Services in Kenya: Challenges ...

    African Journals Online (AJOL)

    seriane.camara

    2009-05-14

    May 14, 2009 ... method of service delivery that also enhances quality and performance. This .... The bottom-line argument is that water and sanitation systems ... finally urged that decision-making, implementation of projects and operation.

  20. 56 original article the influence of environmental sanitation practices

    African Journals Online (AJOL)

    Dr Oboro VO

    2006-05-19

    May 19, 2006 ... 56% of the cases used water from unprotected wells ... encouraged to put into practice what they learn about the treatment and prevention of diarrhoea. Keywords: Sanitation, Hygiene, Practices, Diarrhoea, Koforidua.

  1. Broad Spectrum Sanitizing Wipes with Food Additives, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Microcide proposes to develop novel multipurpose non-toxic sanitizing wipes that are aqueous based, have shelf life of 3-5 years, have broad spectrum microbicidal...

  2. The application of appropriate technologies and systems for sustainable sanitation

    CSIR Research Space (South Africa)

    Duncker, Louiza C

    2014-11-01

    Full Text Available and environmental factors into planning, implementation and decision-making so as to ensure that development serves present and future generations. The chapter discusses the use of appropriate technologies and systems to render sanitation technologies and services...

  3. An assessment of environmental sanitation in an urban community ...

    African Journals Online (AJOL)

    USER

    Inadequate environmental sanitation has been recognized as a public health hazard worldwide. In some. Nigerian ... have a significant beneficial impact on health both in ... deaths from 222 Local Government Areas (LGAs) in 18. States of the ...

  4. GENDER MAIN STREAMING IN WATER SUPPLY AND SANITATION PROJECTS

    Directory of Open Access Journals (Sweden)

    Simona FRONE

    2014-06-01

    Full Text Available As we have stated in the previous year conference paper, the human right to water and sanitation entitles everyoneto water and sanitation services which are available, accessible, affordable, acceptable and safe. Developmentprograms for water and sanitation services, as many other socio-economic development programs have often beenassumed to be neutral in terms of gender. However, sometimes there can be failures in the implementation andharnessing of such projects because of errors arising from lack of adequate integration of gender equality. In thispaper are highlighted some aspects and issues of gender mainstreaming in water supply and sanitation developmentprojects, including conclusions from a case study conducted by an NGO in a commune of Romania and ownrecommendations.

  5. Basic sanitation policy in Brazil: discussion of a path.

    Science.gov (United States)

    Sousa, Ana Cristina A de; Costa, Nilson do Rosário

    2016-01-01

    This article demonstrates that the position of dominance enjoyed by state sanitation companies dictates the public policy decision-making process for sanitation in Brazil. These companies' hegemony is explained here through the analysis of a path that generated political and economic incentives that have permitted its consolidation over time. Through the content analysis of the legislation proposed for the sector and the material produced by the stakeholders involved in the approval of new regulations for the sector in 2007, the study identifies the main sources of incentive introduced by the adoption of the National Sanitation Plan, which explain certain structural features of the current sanitation policy and its strong capacity to withstand the innovations proposed under democratic rule.

  6. The status of hygiene and sanitation practice among rural model ...

    African Journals Online (AJOL)

    The status of hygiene and sanitation practice among rural model families of the Health Extension Program (HEP) in Wolayta and Kembata Tembaro Zones of Southern Nations, Nationalities and Peoples' Region of Ethiopia.

  7. PERFORMANCE EVALUATION OF TYPE I MARINE SANITATION DEVICES

    Science.gov (United States)

    This performance test was designed to evaluate the effectiveness of two Type I Marine Sanitation Devices (MSDs): the Electro Scan Model EST 12, manufactured by Raritan Engineering Company, Inc., and the Thermopure-2, manufactured by Gross Mechanical Laboratories, Inc. Performance...

  8. Spectroscopic imaging technologies for online food safety and sanitation inspection

    Science.gov (United States)

    The Environmental Microbial and Food Safety Laboratory, ARS, USDA is one of the leading groups for the development of optoelectronic sensing technologies and methodologies for food quality, safety, and sanitation inspection. High throughput hyperspectral and multispectral imaging techniques use Ram...

  9. An assessment of water, sanitation and hygiene (wash) practices ...

    African Journals Online (AJOL)

    An assessment of water, sanitation and hygiene (wash) practices and quality of routinely ... East African Medical Journal ... There was a high uptake of households with treated drinking water (92%), availability of hand washing facilities in ...

  10. Non-Thermal Sanitation By Atmospheric Pressure Plasma, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — ORBITEC proposes to develop a non-thermal technology based on atmospheric-pressure (AP) cold plasma to sanitize foods, food packaging materials, and other hardware...

  11. Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells

    KAUST Repository

    Dupont, Stephanie R.; Oliver, Mark; Krebs, Frederik C.; Dauskardt, Reinhold H.

    2012-01-01

    The interlayer adhesion of roll-to-roll processed flexible inverted P3HT:PCBM bulk heterojunction (BHJ) polymer solar cells is reported. Poor adhesion between adjacent layers may result in loss of device performance from delamination driven

  12. Radiometric study of creep in ingot rolling

    International Nuclear Information System (INIS)

    Kubicek, P.; Zamyslovsky, Z.; Uherek, J.

    The radiometric study of creep during ingot rolling performed in the rolling mill of the Vitkovice Iron and Steel Works and the first results are described. Selected sites in 3 to 8 ton ingots were labelled with 2 to 3.7x10 5 Bq of 60 Co and after rolling into blocks, the transposition of the labelled sites of the ingots was investigated. The results indicate creep during rolling, local extension in certain sites under study and help to determine the inevitable bottom crop incurred in the forming. Finally, the requirements put on the radiometric apparatus for the next stages of technological research are presented. (author)

  13. METHOD OF HOT ROLLING URANIUM METAL

    Science.gov (United States)

    Kaufmann, A.R.

    1959-03-10

    A method is given for quickly and efficiently hot rolling uranium metal in the upper part of the alpha phase temperature region to obtain sound bars and sheets possessing a good surface finish. The uranium metal billet is heated to a temperature in the range of 1000 deg F to 1220 deg F by immersion iii a molten lead bath. The heated billet is then passed through the rolls. The temperature is restored to the desired range between successive passes through the rolls, and the rolls are turned down approximately 0.050 inch between successive passes.

  14. Role of the CSIR/WRC Sanitation Technology Demonstration Centre in creating awareness, sharing information and in decision-making regarding sanitation technologies

    CSIR Research Space (South Africa)

    Mema, V

    2010-09-01

    Full Text Available The CSIR and the Water Research Commission (WRC) have envisioned a Sanitation Technology Demonstration Centre to provide a cutting-edge environment for bringing to light old and new, as well as promising sanitation technologies. The purpose...

  15. SANitation CHoice Involving Stakeholders : a participatory multi-criteria method for drainage and sanitation system selection in developing cities applied in Ho Chi Minh City, Vietnam

    NARCIS (Netherlands)

    Buuren, van J.C.L.

    2010-01-01

    Keywords: sanitation; drainage; planning; multi-criteria decision analysis; stakeholder dialogues, developing countries

    The poor living in slums and other unplanned urban areas in developing countries have no access to adequate drainage and sanitation provisions with grave consequences

  16. Brazilian Constitution and the Fundamental Right to Sanitation

    OpenAIRE

    Michely Vargas Delpupo; José Geraldo Romanello Bueno

    2015-01-01

    The right to basic sanitation, was elevated to the category of fundamental right by the Constitution of 1988 to protect the ecologically balanced environment, ensuring social rights to health and adequate housing and put the dignity of the human person as the foundation of the Brazilian Democratic State. Before their essentiality to humans, this article seeks to understand why universal access to basic sanitation is a goal so difficult to achieve in Brazil. Therefore, thi...

  17. Fabrication of cold-rolled bands of the alloy-ehi 702 in rolls

    International Nuclear Information System (INIS)

    Zhuchin, V.N.; Gindin, A.Sh.; Shaburov, V.E.; Vladimirov, S.M.; Sokolov, V.A.; Shavkun, V.V.; Perepelitsa, I.V.; Markov, V.V.; Naymov, E.P.; Evstaf'ev, P.P.

    1977-01-01

    The questions are discussed, connected with the manufacture of cold-rolled strip of alloy EI702 in reels from strip blanks. It has been established that in the manufacture of hot-rolled stock from EI702 slabs it is necessary to use powerful rolling equipment because of high resistance to deformation. The reel method for manufacturing EI702 alloy improves the rolled stock and increases percentage of serviceable stock, as well as the output

  18. Disassembly and Sanitization of Classified Matter

    International Nuclear Information System (INIS)

    Stockham, Dwight J.; Saad, Max P.

    2008-01-01

    The Disassembly Sanitization Operation (DSO) process was implemented to support weapon disassembly and disposition by using recycling and waste minimization measures. This process was initiated by treaty agreements and reconfigurations within both the DOD and DOE Complexes. The DOE is faced with disassembling and disposing of a huge inventory of retired weapons, components, training equipment, spare parts, weapon maintenance equipment, and associated material. In addition, regulations have caused a dramatic increase in the need for information required to support the handling and disposition of these parts and materials. In the past, huge inventories of classified weapon components were required to have long-term storage at Sandia and at many other locations throughout the DoE Complex. These materials are placed in onsite storage unit due to classification issues and they may also contain radiological and/or hazardous components. Since no disposal options exist for this material, the only choice was long-term storage. Long-term storage is costly and somewhat problematic, requiring a secured storage area, monitoring, auditing, and presenting the potential for loss or theft of the material. Overall recycling rates for materials sent through the DSO process have enabled 70 to 80% of these components to be recycled. These components are made of high quality materials and once this material has been sanitized, the demand for the component metals for recycling efforts is very high. The DSO process for NGPF, classified components established the credibility of this technique for addressing the long-term storage requirements of the classified weapons component inventory. The success of this application has generated interest from other Sandia organizations and other locations throughout the complex. Other organizations are requesting the help of the DSO team and the DSO is responding to these requests by expanding its scope to include Work-for- Other projects. For example

  19. Improving Sanitation and Health in Rural Alaska

    Science.gov (United States)

    Bubenheim, David L.

    2013-01-01

    In rural Alaskan communities personal health is threatened by energy costs and limited access to clean water, wastewater management, and adequate nutrition. Fuel-­-based energy systems are significant factors in determining local accessibility to clean water, sanitation and food. Increasing fuel costs induce a scarcity of access and impact residents' health. The University of Alaska Fairbanks (UAF) School of Natural Resources and Agricultural Sciences (SNRAS), NASA's Ames Research Center, and USDA Agricultural Research Service (ARS) have joined forces to develop high-efficiency, low­-energy consuming techniques for water treatment and food production in rural circumpolar communities. Methods intended for exploration of space and establishment of settlements on the Moon or Mars will ultimately benefit Earth's communities in the circumpolar north. The initial phase of collaboration is completed. Researchers from NASA Ames Research Center and SNRAS, funded by the USDA­-ARS, tested a simple, reliable, low-energy sewage treatment system to recycle wastewater for use in food production and other reuse options in communities. The system extracted up to 70% of the water from sewage and rejected up to 92% of ions in the sewage with no carryover of toxic effects. Biological testing showed that plant growth using recovered water in the nutrient solution was equivalent to that using high-purity distilled water. With successful demonstration that the low energy consuming wastewater treatment system can provide safe water for communities and food production, the team is ready to move forward to a full-scale production testbed. The SNRAS/NASA team (including Alaska students) will design a prototype to match water processing rates and food production to meet rural community sanitation needs and nutritional preferences. This system would be operated in Fairbanks at the University of Alaska through SNRAS. Long­-term performance will be validated and operational needs of the

  20. Factors that Influence the Effectiveness of Sanitation Programs

    Science.gov (United States)

    Fernandez-Haddad, Marilu; Ingram, Maia

    2015-01-01

    Local governments in both Mexico and the U.S. spend considerable money on public services, which do not always bring the expected results. For instance, a large part of the public budget is destined to solve social and health problems, such as public sanitation. Government has attacked the problem by providing public sanitation infrastructure (such as garbage and recycling receptacles) and by using social ad campaigns. However, these efforts do not always affect the habits of residents and bring the desired changes in city sanitation. This article presents a case study that used a participatory method to address an innovative city sanitation effort: The Clean City Program in Puebla, Mexico. This program adopted social marketing techniques, a discipline born in the 70s when the principles and practices developed to sell products and services started to be applied to sell ideas, attitudes, or behaviors. Social marketing programs have been adopted by governments to change attitudes and behavior in areas such as public services. The article first describes the context and strategies of the program, which included the use of the promotora model to engage community members. The researchers then make use of qualitative data gathered throughout program planning and implementation to evaluate the impact of the social marketing programs and its effectiveness. The article analyzes social, educational, economic, demographic, and cultural factors that influence the effectiveness of sanitation programs and presents recommendations for strategies to engage community members in community sanitation programs. PMID:26389106

  1. Factors that influence the effectiveness of sanitation programs

    Directory of Open Access Journals (Sweden)

    Marilu eFernandez

    2015-09-01

    Full Text Available Local governments in both Mexico and the U.S. spend considerable money on public services, which do not always bring the expected results. For instance, a large part of the public budget is destined to solve social and health problems such as public sanitation. Government has attacked the problem by providing public sanitation infrastructure (such as garbage and recycling receptacles and the use of social ad campaigns. However, these efforts do not always impact the habits of residents and bring the desired changes in city sanitation.This paper presents a case study that used a participatory method to address an innovative city sanitation effort: The Clean City Program in Puebla, Mexico. This program adopted social marketing techniques, a discipline born in the 70s when the principles and practices developed to sell products and services started to be applied to sell ideas, attitudes or behaviors. Social marketing programs have been adopted by governments to change attitudes and behavior in areas such as public services.The paper first describes the context and strategies of the program which included the use of the promotora model to engage community members. The researchers then make use of qualitative data gathered throughout program planning and implementation to evaluate the impact of the social marketing programs and its effectiveness. The paper analyses social, educational, economic, demographic and cultural factors that influence the effectiveness of sanitation programs and presents recommendations for strategies to engage community members in community sanitation programs.

  2. Effect of hand sanitizer location on hand hygiene compliance.

    Science.gov (United States)

    Cure, Laila; Van Enk, Richard

    2015-09-01

    Hand hygiene is the most important intervention to prevent infection in hospitals. Health care workers should clean their hands at least before and after contact with patients. Hand sanitizer dispensers are important to support hand hygiene because they can be made available throughout hospital units. The aim of this study was to determine whether the usability of sanitizer dispensers correlates with compliance of staff in using the sanitizer in a hospital. This study took place in a Midwest, 404-bed, private, nonprofit community hospital with 15 inpatient care units in addition to several ambulatory units. The usability and standardization of sanitizers in 12 participating inpatient units were evaluated. The hospital measured compliance of staff with hand hygiene as part of their quality improvement program. Data from 2010-2012 were analyzed to measure the relationship between compliance and usability using mixed-effects logistic regression models. The total usability score (P = .0046), visibility (P = .003), and accessibility of the sanitizer on entrance to the patient room (P = .00055) were statistically associated with higher observed compliance rates. Standardization alone showed no significant impact on observed compliance (P = .37). Hand hygiene compliance can be influenced by visibility and accessibility of dispensers. The sanitizer location should be part of multifaceted interventions to improve hand hygiene. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  3. The role of the CSIR/WRC Sanitation Technology Demonstration Centre in creating awareness, sharing information and in decision-making regarding sanitation technologies

    CSIR Research Space (South Africa)

    Mema, V

    2010-09-01

    Full Text Available sanitation technologies platform exhibits wet sanitation technologies (e.g. septic tanks, pour flush toilet unit) which may generally be constructed within a building. Wet sanitation technologies are all the sanitation technologies that require water... to wash down faeces from the pedestal either to a septic tank or centralised treatment works. In decentralised treatment systems like septic tanks, the treatment of wastewater occurs at a localised treatment facility close to the source of waste...

  4. Rolling into spatial disorientation: Simulator demonstration of the post-roll (Gillingham) illusion

    NARCIS (Netherlands)

    Nooij, S.A.E.; Groen, E.L.

    2011-01-01

    Introduction: Spatial disorientation (SD) is still a contributing factor in many aviation accidents, stressing the need for adequate SD training scenarios. In this article we focused on the post-roll effect (the sensation of rolling back after a roll maneuver, such as an entry of a coordinated turn)

  5. The Pursuit of Excellence: An Analysis of the Honors College Application and Enrollment Decision for a Large Public University

    Science.gov (United States)

    Singell, Larry D., Jr.; Tang, Hui-Hsuan

    2012-01-01

    Honors colleges housed in public universities began only in the last half century, but have become nearly ubiquitous over the last 20 years. This paper, using recent data from the oldest stand-alone honors college in the country, is the first to study how the application and enrollment decisions of honors college students differ from the general…

  6. The IBNET Water Supply and Sanitation Blue Book 2014 : The International Benchmarking Network for Water and Sanitation Utilities Databook

    OpenAIRE

    Danilenko, Alexander; van den Berg, Caroline; Macheve, Berta; Moffitt, L. Joe

    2014-01-01

    Well-run water utilities play an important role in ending poverty and boosting shared prosperity. Consumers need reliable access to high quality and affordable water and sanitation services. To deliver these basic services efficiently and effectively requires high-performing utilities that are able to respond to urban growth, to connect with the poor, and to improve wastewater disposal practices. The IBNET Water Supply and Sanitation Blue Book 2014 summarizes the water sector status from 2006...

  7. Mirror Neurons, Theatrical Mirrors and the Honor Code

    OpenAIRE

    Greer, M.G. (Margaret G.)

    2012-01-01

    Este artículo relaciona el descubrimiento de cierta clase de células cerebrales denominados «neuronas espejo», que pueden ayudar a explicar la base biológica de la naturaleza pre-conceptual, pre-lingüística de la cognición humana, a la teoría lacaniana de la formación de la subjetividad humana en el espacio del Otro. Así explica la naturaleza inter-sujetiva del honor que Lope describe en Los comendadores de Córdoba como «aquélla que consiste en otro». La teoría de las neuronas espejo muestra ...

  8. Hierarchical decision modeling essays in honor of Dundar F. Kocaoglu

    CERN Document Server

    2016-01-01

    This volume, developed in honor of Dr. Dundar F. Kocaoglu, aims to demonstrate the applications of the Hierarchical Decision Model (HDM) in different sectors and its capacity in decision analysis. It is comprised of essays from noted scholars, academics and researchers of engineering and technology management around the world. This book is organized into four parts: Technology Assessment, Strategic Planning, National Technology Planning and Decision Making Tools. Dr. Dundar F. Kocaoglu is one of the pioneers of multiple decision models using hierarchies, and creator of the HDM in decision analysis. HDM is a mission-oriented method for evaluation and/or selection among alternatives. A wide range of alternatives can be considered, including but not limited to, different technologies, projects, markets, jobs, products, cities to live in, houses to buy, apartments to rent, and schools to attend. Dr. Kocaoglu’s approach has been adopted for decision problems in many industrial sectors, including electronics rese...

  9. Roll forming of eco-friendly stud

    Science.gov (United States)

    Keum, Y. T.; Lee, S. Y.; Lee, T. H.; Sim, J. K.

    2013-12-01

    In order to manufacture an eco-friendly stud, the sheared pattern is designed by the Taguchi method and expanded by the side rolls. The seven geometrical shape of sheared pattern are considered in the structural and thermal analyses to select the best functional one in terms of the durability and fire resistance of dry wall. For optimizing the size of the sheared pattern chosen, the L9 orthogonal array and smaller-the-better characteristics of the Taguchi method are used. As the roll gap causes forming defects when the upper-and-lower roll type is adopted for expanding the sheared pattern, the side roll type is introduced. The stress and strain distributions obtained by the FEM simulation of roll-forming processes are utilized for the design of expanding process. The expanding process by side rolls shortens the length of expanding process and minimizes the cost of dies. Furthermore, the stud manufactured by expanding the sheared pattern of the web is an eco-friend because of the scrapless roll-forming process. In addition, compared to the conventionally roll-formed stud, the material cost is lessened about 13.6% and the weight is lightened about 15.5%.

  10. Pipe Rolling from Continuous Cast Metal

    International Nuclear Information System (INIS)

    Zhordania, I.; Chkhartishvili, I.; Lordkipanidze, J.; Melashvili, Z.; Papava, K.; Khundadze, K.

    2007-01-01

    The approach to manufacturing of high quality pipes as a result of solid and hollow billet rolling from continuous cast metal is shown. Optimal parameters of piercing, temperature of piercing and piercing rolling mill rollers speed have been experimentally established. (author)

  11. Numerical analysis of Swiss roll metamaterials

    International Nuclear Information System (INIS)

    Demetriadou, A; Pendry, J B

    2009-01-01

    A Swiss roll metamaterial is a resonant magnetic medium, with a negative magnetic permeability for a range of frequencies, due to its self-inductance and self-capacitance components. In this paper, we discuss the band structure, S-parameters and effective electromagnetic parameters of Swiss roll metamaterials, with both analytical and numerical results, which show an exceptional convergence.

  12. Efficient Circulation of Railway Rolling Stock

    NARCIS (Netherlands)

    A. Alfieri (Arianna); R. Groot (Rutger); L.G. Kroon (Leo); A. Schrijver (Lex)

    2002-01-01

    textabstractRailway rolling stock (locomotives, carriages, and train units) is one of the most significant cost sources for operatorsof passenger trains, both public and private. Rolling stock costsare due to material acquisition, power supply, and material maintenance. The efficient circulation of

  13. Lactic Acid Fermentation, Urea and Lime Addition: Promising Faecal Sludge Sanitizing Methods for Emergency Sanitation.

    Science.gov (United States)

    Anderson, Catherine; Malambo, Dennis Hanjalika; Perez, Maria Eliette Gonzalez; Nobela, Happiness Ngwanamoseka; de Pooter, Lobke; Spit, Jan; Hooijmans, Christine Maria; de Vossenberg, Jack van; Greya, Wilson; Thole, Bernard; van Lier, Jules B; Brdjanovic, Damir

    2015-10-29

    In this research, three faecal sludge sanitizing methods-lactic acid fermentation, urea treatment and lime treatment-were studied for application in emergency situations. These methods were investigated by undertaking small scale field trials with pit latrine sludge in Blantyre, Malawi. Hydrated lime was able to reduce the E. coli count in the sludge to below the detectable limit within 1 h applying a pH > 11 (using a dosage from 7% to 17% w/w, depending faecal sludge alkalinity), urea treatment required about 4 days using 2.5% wet weight urea addition, and lactic acid fermentation needed approximately 1 week after being dosed with 10% wet weight molasses (2 g (glucose/fructose)/kg) and 10% wet weight pre-culture (99.8% pasteurised whole milk and 0.02% fermented milk drink containing Lactobacillus casei Shirota). Based on Malawian prices, the cost of sanitizing 1 m³ of faecal sludge was estimated to be €32 for lactic acid fermentation, €20 for urea treatment and €12 for hydrated lime treatment.

  14. Constant-roll (quasi-)linear inflation

    Science.gov (United States)

    Karam, A.; Marzola, L.; Pappas, T.; Racioppi, A.; Tamvakis, K.

    2018-05-01

    In constant-roll inflation, the scalar field that drives the accelerated expansion of the Universe is rolling down its potential at a constant rate. Within this framework, we highlight the relations between the Hubble slow-roll parameters and the potential ones, studying in detail the case of a single-field Coleman-Weinberg model characterised by a non-minimal coupling of the inflaton to gravity. With respect to the exact constant-roll predictions, we find that assuming an approximate slow-roll behaviour yields a difference of Δ r = 0.001 in the tensor-to-scalar ratio prediction. Such a discrepancy is in principle testable by future satellite missions. As for the scalar spectral index ns, we find that the existing 2-σ bound constrains the value of the non-minimal coupling to ξphi ~ 0.29–0.31 in the model under consideration.

  15. Analytical method for establishing indentation rolling resistance

    Directory of Open Access Journals (Sweden)

    Gładysiewicz Lech

    2018-01-01

    Full Text Available Belt conveyors are highly reliable machines able to work in special operating conditions. Harsh environment, long distance of transporting and great mass of transported martials are cause of high energy usage. That is why research in the field of belt conveyor transportation nowadays focuses on reducing the power consumption without lowering their efficiency. In this paper, previous methods for testing rolling resistance are described, and new method designed by authors was presented. New method of testing rolling resistance is quite simple and inexpensive. Moreover it allows to conduct the experimental tests of the impact of different parameters on the value of indentation rolling resistance such as core design, cover thickness, ambient temperature, idler travel frequency, or load value as well. Finally results of tests of relationship between rolling resistance and idler travel frequency and between rolling resistance and idler travel speed was presented.

  16. Analytical method for establishing indentation rolling resistance

    Science.gov (United States)

    Gładysiewicz, Lech; Konieczna, Martyna

    2018-01-01

    Belt conveyors are highly reliable machines able to work in special operating conditions. Harsh environment, long distance of transporting and great mass of transported martials are cause of high energy usage. That is why research in the field of belt conveyor transportation nowadays focuses on reducing the power consumption without lowering their efficiency. In this paper, previous methods for testing rolling resistance are described, and new method designed by authors was presented. New method of testing rolling resistance is quite simple and inexpensive. Moreover it allows to conduct the experimental tests of the impact of different parameters on the value of indentation rolling resistance such as core design, cover thickness, ambient temperature, idler travel frequency, or load value as well. Finally results of tests of relationship between rolling resistance and idler travel frequency and between rolling resistance and idler travel speed was presented.

  17. New perspectives on constant-roll inflation

    Science.gov (United States)

    Cicciarella, Francesco; Mabillard, Joel; Pieroni, Mauro

    2018-01-01

    We study constant-roll inflation using the β-function formalism. We show that the constant rate of the inflaton roll is translated into a first order differential equation for the β-function which can be solved easily. The solutions to this equation correspond to the usual constant-roll models. We then construct, by perturbing these exact solutions, more general classes of models that satisfy the constant-roll equation asymptotically. In the case of an asymptotic power law solution, these corrections naturally provide an end to the inflationary phase. Interestingly, while from a theoretical point of view (in particular in terms of the holographic interpretation) these models are intrinsically different from standard slow-roll inflation, they may have phenomenological predictions in good agreement with present cosmological data.

  18. Upscaling of polymer solar cell fabrication using full roll-to-roll processing

    DEFF Research Database (Denmark)

    Krebs, Frederik C; Tromholt, Thomas; Jørgensen, Mikkel

    2010-01-01

    factors (excluding bus bars) of 50, 67 and 75% respectively. In addition modules with lengths of 6, 10, 20, 22.5 and 25 cm were explored. The devices were prepared by full roll-to-roll solution processing in a web width of 305 mm and roll lengths of up to 200 m. The devices were encapsulated...... with a barrier material in a full roll-to-roll process using standard adhesives giving the devices excellent stability during storage and operation. The total area of processed polymer solar cell was around 60 m2 per run. The solar cells were characterised using a roll-to-roll system comprising a solar simulator...... to the cost for electricity using existing technologies the levelized cost of electricity (LCOE) is expected to be significantly higher than the existing technologies due to the inferior operational lifetime. The presented devices are thus competitive for consumer electronics but ill-suited for on...

  19. Life history, code of honor, and emotional responses to inequality in an economic game.

    Science.gov (United States)

    Pedersen, Eric J; Forster, Daniel E; McCullough, Michael E

    2014-10-01

    The code of honor, which is characterized by a preoccupation with reputation and willingness to take retaliatory action, has been used extensively to explain individual and cultural differences in peoples' tendencies to behave aggressively. However, research on the relationship between the code of honor and emotional responses to social interactions has been limited in scope, focusing primarily on anger in response to insults and reputational threats. Here we broaden this scope by examining the relationship between code of honor and emotional reactions in response to an unfair economic exchange that resulted in unequal monetary earnings among 3 laboratory participants. We found that endorsement of the code of honor was related to anger and envy in response to unfair monetary distributions. Interestingly, code of honor predicted envy above and beyond what could be accounted for by anger, but the converse was not the case. This suggests that the code of honor influenced perceptions of how subjects viewed their own earnings relative to those of others, which consequently was responsible for their apparent anger as a result of the economic transaction. Furthermore, the unique relationship between code of honor and envy was present only for subjects who received unfair treatment and not for subjects who merely witnessed unfair treatment. Additionally, we replicated previous findings that harsh childhood environmental conditions are associated with endorsement of the code of honor, highlighting the potential value of incorporating a life history theoretical approach to investigating individual differences in endorsement of the code of honor. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  20. "Shades of Foreign Evil": "Honor Killings" and "Family Murders" in the Canadian Press.

    Science.gov (United States)

    Shier, Allie; Shor, Eran

    2016-09-01

    This article compares murder cases labeled "honor killings" with cases labeled "family/spousal murders" in the Canadian news media, exploring the construction of boundaries between these two practices. We conducted a systematic qualitative content analysis, examining a sample of 486 articles from three major Canadian newspapers between 2000 and 2012. Our analysis shows that "honor killings" are framed in terms of culture and ethnic background, presenting a dichotomy between South Asian/Muslim and Western values. Conversely, articles presenting cases as "family/spousal murders" tend to focus on the perpetrators' personalities or psychological characteristics, often ignoring factors such as culture, patriarchy, honor, and shame. © The Author(s) 2015.

  1. Effect of hand sanitizer use on elementary school absenteeism.

    Science.gov (United States)

    Hammond, B; Ali, Y; Fendler, E; Dolan, M; Donovan, S

    2000-10-01

    Several studies have indicated a connection between handwashing and illness-related absenteeism in school settings. The difficulty of ensuring consistent and effective handwashing among student populations has also been noted. The purpose of this study was to assess the effectiveness of the use of an alcohol gel hand sanitizer in the classroom to help decrease the illness-related absentee rate for elementary school students. This study involved 5 individual school districts, 16 individual schools, and more than 6000 students in Delaware, Ohio, Tennessee, and California. Individual schools in each district were paired into product and control groups. In the product group schools, an alcohol gel hand sanitizer was used by the students and staff when entering and leaving the classroom. Absenteeism due to infection was recorded, and the data were statistically analyzed. The overall reduction in absenteeism due to infection in the schools included in this study was 19.8% for schools that used an alcohol gel hand sanitizer compared with the control schools (P sanitizer was used. Elementary school absenteeism due to infection is significantly reduced when an alcohol gel hand sanitizer is used in the classroom as part of a hand hygiene program.

  2. The toilet sanitation management to meet healthy house standards

    Science.gov (United States)

    Studyanto, Anung B.; Musfiroh, Mujahidatul; Sholahuddin

    2018-03-01

    To increase the community participation in the toilet sanitation management at house to making a house according the healthy house standart. The toilet sanitation management is becoming complex with increasing population growth, and limited land for sanitation. The community participation determines the success of the toilet sanitation management and improving the health status of the community. This study used an observation method for the availability of latrines according the healthy house criteria, spatial layout and pit layout that meet health and safety standards. Spatial and layout include bathroom area, type of material used for wall and floor bathroom, type of latrine, distance the waste storage distance with water source, and sewerage. The respondents in this study are the people who live in Jaten Village taken by accidental sampling. The number of respondents in this study were 15 respondents.This study shows that all respondents (100%) already have toilet and 8 respondents (53%) have a good toilet sanitation management. Respondents have provided latrines as an effort to manage household waste and according the healthy house standart. The latrine spatial plan has been well implemented, but the latrine layout plan has not been properly.

  3. Inflation with a constant rate of roll

    International Nuclear Information System (INIS)

    Motohashi, Hayato; Starobinsky, Alexei A.; Yokoyama, Jun'ichi

    2015-01-01

    We consider an inflationary scenario where the rate of inflaton roll defined by ·· φ/H φ-dot remains constant. The rate of roll is small for slow-roll inflation, while a generic rate of roll leads to the interesting case of 'constant-roll' inflation. We find a general exact solution for the inflaton potential required for such inflaton behaviour. In this model, due to non-slow evolution of background, the would-be decaying mode of linear scalar (curvature) perturbations may not be neglected. It can even grow for some values of the model parameter, while the other mode always remains constant. However, this always occurs for unstable solutions which are not attractors for the given potential. The most interesting particular cases of constant-roll inflation remaining viable with the most recent observational data are quadratic hilltop inflation (with cutoff) and natural inflation (with an additional negative cosmological constant). In these cases even-order slow-roll parameters approach non-negligible constants while the odd ones are asymptotically vanishing in the quasi-de Sitter regime

  4. Design and analysis of roll cage

    Science.gov (United States)

    Angadi, Gurusangappa; Chetan, S.

    2018-04-01

    Wildlife fire fighting vehicles are used to extinguish fires in forests, in this process vehicles face falling objects like rocks, tree branches and other objects. Also due to uneven conditions of the terrain like cliff edges, uneven surfaces etc. makes the vehicle to roll over and these can cause injuries to both the driver and the operator. Roll over of a vehicle is a common incident which makes fatal injuries to the operator and also stands next to the crash accidents. In order to reduce the injury level and continuous roll over of the vehicle it is necessary to equip suitable roll cage according to standards of vehicle. In this present work roll cage for pump operator in wildfire fighting vehicle is designed and analysis is carried out in computer simulated environment when seating position of operator seated outside of the cabin. According to NFPA 1906 standards wildlife fire apparatus, Design and Test procedures that are carried out in Hyperworks maintaining SAE J1194.1983 standards. G load case, roof crush analysis and pendulum impact analysis tests are carried out on roll cage to ensure the saftey of design. These load cases are considerd to satisfy the situation faced in forest terrain. In these test procedures roll cage is analysed for stresses and deformation in various load cases. After recording results these are compared with standards mentioned in SAE J1194.1983.

  5. Inflationary dynamics with a smooth slow-roll to constant-roll era transition

    Energy Technology Data Exchange (ETDEWEB)

    Odintsov, S.D. [ICREA, Passeig Luis Companys, 23, 08010 Barcelona (Spain); Oikonomou, V.K., E-mail: odintsov@ieec.uab.es, E-mail: v.k.oikonomou1979@gmail.com [Laboratory for Theoretical Cosmology, Tomsk State University of Control Systems and Radioelectronics (TUSUR), Lenin Avenue 40, 634050 Tomsk (Russian Federation)

    2017-04-01

    In this paper we investigate the implications of having a varying second slow-roll index on the canonical scalar field inflationary dynamics. We shall be interested in cases that the second slow-roll can take small values and correspondingly large values, for limiting cases of the function that quantifies the variation of the second slow-roll index. As we demonstrate, this can naturally introduce a smooth transition between slow-roll and constant-roll eras. We discuss the theoretical implications of the mechanism we introduce and we use various illustrative examples in order to better understand the new features that the varying second slow-roll index introduces. In the examples we will present, the second slow-roll index has exponential dependence on the scalar field, and in one of these cases, the slow-roll era corresponds to a type of α-attractor inflation. Finally, we briefly discuss how the combination of slow-roll and constant-roll may lead to non-Gaussianities in the primordial perturbations.

  6. Look! It's Rock'n'roll!

    DEFF Research Database (Denmark)

    Lindelof, Anja

    2007-01-01

    , and dates. Consult your library or click here for more information on citing sources. -------------------------------------------------------------------------------- Anja Mølle Lindelof. (2007). Look! it's rock'n'roll! how television participated in shaping the visual genre conventions of popular music...... to personal names, capitalization, and dates. Consult your library or click here for more information on citing sources. -------------------------------------------------------------------------------- Anja Mølle Lindelof. "Look! It's Rock'n'roll! How television participated in shaping the visual genre....... Pay special attention to personal names, capitalization, and dates. Consult your library or click here for more information on citing sources. -------------------------------------------------------------------------------- TY - JOUR T1 - Look! It's Rock'n'roll! How television participated in shaping...

  7. Replication of nanopits and nanopillars by roll-to-roll extrusion coating using a structured cooling roll

    DEFF Research Database (Denmark)

    Murthy, Swathi; Pranov, Henrik; Pedersen, Henrik Chresten

    2016-01-01

    This paper investigates a novel, very high throughput, roll-to-roll (R2R) process for nanostructuring of polymer foils, called R2R extrusion coating. It has the potential to accelerate the integration of nanostructured materials in consumer products for a variety of applications, including optical....../height of 100 nm. The best replication was achieved in polypropylene, by running at high roller line-speed of 60 m/min, and high cooling roller temperature of 70°C. Replication in other common polymers like polyethylene and polystyrene was not possible for the parameter range used for the investigation......., technical, and functional surfaces and devices. In roll-to-roll extrusion coating, a molten polymer film is extruded through a flat die forming a melt curtain, and then laminated onto a carrier foil. The lamination occurs as the melt curtain is pressed between a cooling roller and a counter roller...

  8. For Distinguished Public Service: Medical Library Association Honors FNLM and NIH MedlinePlus Magazine | NIH ...

    Science.gov (United States)

    ... Medical Library Association Honors FNLM and NIH MedlinePlus Magazine Past Issues / Summer 2011 Table of Contents MLA ... From You We want your feedback on the magazine and ideas for future issues, as well as ...

  9. 12 New England Organizations Honored for Outstanding Achievements in Energy Efficiency

    Science.gov (United States)

    EPA and the U.S. Department of Energy (DOE) are honoring 12 New England businesses and organizations for their commitment to saving energy, saving money, and protecting the environment through superior energy efficiency achievements.

  10. Masculine and family honor and youth violence: The moderating role of ethnic-cultural affiliation.

    Science.gov (United States)

    Khoury-Kassabri, Mona

    2016-01-01

    This study examines the involvement in violent behavior of at-risk Arab and Jewish male youth from a large city in Israel. It explores the role masculine and family honor plays in predicting youth involvement in violence and tests whether this association is moderated by ethnic-cultural affiliation. A total of 282 males (59.2% Arab), aged 15-21, filled out a self-report closed-ended questionnaire. We found that among both Jewish and Arab youth a greater concern with masculine honor was positively associated with involvement in violence. We also found that Arab youth are significantly more involved in violent behavior than Jewish youth, and that Arab participants were more concerned with masculine and family honor. However, contrary to what was expected, greater concern with family honor was associated with lower levels of Arab youth involvement in violence. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  11. Explaining how honors students position themselves when collaborating with regular students

    NARCIS (Netherlands)

    Volker, Judith; Kamans, Elanor; Tiesinga, Lammert; Wolfensberger, Marca

    2015-01-01

    Paper presentatie tijdens de EARLI Conference 2015, Limassol, Cypres, 28 augustus. In this line of research we take a social psychological approach to understanding how honors students position themselves when collaborating with regular students. More specifically, we explore whether stereotypes

  12. Statement of Honorable Donald C. Winter Secretary of the Navy Before the House Armed Services Committee

    National Research Council Canada - National Science Library

    Winter, Donald C

    2007-01-01

    Mr. Chairman, Mr. Ranking Member, and Members of the Committee, it is an honor to appear before you representing the brave men and women of the United States Navy and the United States Marine Corps active, reserve...

  13. Male honor and female fidelity: implicit cultural scripts that perpetuate domestic violence.

    Science.gov (United States)

    Vandello, Joseph A; Cohen, Dov

    2003-05-01

    Two studies explored how domestic violence may be implicitly or explicitly sanctioned and reinforced in cultures where honor is a salient organizing theme. Three general predictions were supported: (a) female infidelity damages a man's reputation, particularly in honor cultures; (b) this reputation can be partially restored through the use of violence; and (c) women in honor cultures are expected to remain loyal in the face of jealousy-related violence. Study 1 involved participants from Brazil (an honor culture) and the United States responding to written vignettes involving infidelity and violence in response to infidelity. Study 2 involved southern Anglo, Latino, and northern Anglo participants witnessing a "live" incident of aggression against a woman (actually a confederate) and subsequently interacting with her.

  14. Estimating effects of improved drinking water and sanitation on cholera.

    Science.gov (United States)

    Leidner, Andrew J; Adusumilli, Naveen C

    2013-12-01

    Demand for adequate provision of drinking-water and sanitation facilities to promote public health and economic growth is increasing in the rapidly urbanizing countries of the developing world. With a panel of data on Asia and Africa from 1990 to 2008, associations are estimated between the occurrence of cholera outbreaks, the case rates in given outbreaks, the mortality rates associated with cholera and two disease control mechanisms, drinking-water and sanitation services. A statistically significant and negative effect is found between drinking-water services and both cholera case rates as well as cholera-related mortality rates. A relatively weak statistical relationship is found between the occurrence of cholera outbreaks and sanitation services.

  15. Preventing SQL Injection through Automatic Query Sanitization with ASSIST

    Directory of Open Access Journals (Sweden)

    Raymond Mui

    2010-09-01

    Full Text Available Web applications are becoming an essential part of our everyday lives. Many of our activities are dependent on the functionality and security of these applications. As the scale of these applications grows, injection vulnerabilities such as SQL injection are major security challenges for developers today. This paper presents the technique of automatic query sanitization to automatically remove SQL injection vulnerabilities in code. In our technique, a combination of static analysis and program transformation are used to automatically instrument web applications with sanitization code. We have implemented this technique in a tool named ASSIST (Automatic and Static SQL Injection Sanitization Tool for protecting Java-based web applications. Our experimental evaluation showed that our technique is effective against SQL injection vulnerabilities and has a low overhead.

  16. Recurrent lactic acidosis secondary to hand sanitizer ingestion.

    Science.gov (United States)

    Wilson, M E; Guru, P K; Park, J G

    2015-01-01

    Due to their ability to decrease the spread of infection, hand sanitizers are now ubiquitous in health care settings. We present the case of a 50-year-old woman who was admitted with acute alcohol intoxication and had near complete recovery in 12 hrs. Subsequently, she was found unresponsive on the floor of her hospital room on two separate occasions. Evaluations revealed repeatedly elevated levels of ethanol, acetone, and lactate as well as increased anion gap and hypotension, requiring intensive care unit evaluation and intubation for airway protection. During the second episode, she was found next to an empty bottle of ethanol-based hospital hand sanitizer. She confirmed ingesting hand sanitizer in order to become intoxicated.

  17. Recurrent lactic acidosis secondary to hand sanitizer ingestion

    Directory of Open Access Journals (Sweden)

    M E Wilson

    2015-01-01

    Full Text Available Due to their ability to decrease the spread of infection, hand sanitizers are now ubiquitous in health care settings. We present the case of a 50-year-old woman who was admitted with acute alcohol intoxication and had near complete recovery in 12 hrs. Subsequently, she was found unresponsive on the floor of her hospital room on two separate occasions. Evaluations revealed repeatedly elevated levels of ethanol, acetone, and lactate as well as increased anion gap and hypotension, requiring intensive care unit evaluation and intubation for airway protection. During the second episode, she was found next to an empty bottle of ethanol-based hospital hand sanitizer. She confirmed ingesting hand sanitizer in order to become intoxicated.

  18. Sanitizing sensitive association rules using fuzzy correlation scheme

    International Nuclear Information System (INIS)

    Hameed, S.; Shahzad, F.; Asghar, S.

    2013-01-01

    Data mining is used to extract useful information hidden in the data. Sometimes this extraction of information leads to revealing sensitive information. Privacy preservation in Data Mining is a process of sanitizing sensitive information. This research focuses on sanitizing sensitive rules discovered in quantitative data. The proposed scheme, Privacy Preserving in Fuzzy Association Rules (PPFAR) is based on fuzzy correlation analysis. In this work, fuzzy set concept is integrated with fuzzy correlation analysis and Apriori algorithm to mark interesting fuzzy association rules. The identified rules are called sensitive. For sanitization, we use modification technique where we substitute maximum value of fuzzy items with zero, which occurs most frequently. Experiments demonstrate that PPFAR method hides sensitive rules with minimum modifications. The technique also maintains the modified data's quality. The PPFAR scheme has applications in various domains e.g. temperature control, medical analysis, travel time prediction, genetic behavior prediction etc. We have validated the results on medical dataset. (author)

  19. [Modified Delphi method in the constitution of school sanitation standard].

    Science.gov (United States)

    Yin, Xunqiang; Liang, Ying; Tan, Hongzhuan; Gong, Wenjie; Deng, Jing; Luo, Jiayou; Di, Xiaokang; Wu, Yue

    2012-11-01

    To constitute school sanitation standard using modified Delphi method, and to explore the feasibility and the predominance of Delphi method in the constitution of school sanitation standard. Two rounds of expert consultations were adopted in this study. The data were analyzed with SPSS15.0 to screen indices of school sanitation standard. Thirty-two experts accomplished the 2 rounds of consultations. The average length of expert service was (24.69 ±8.53) years. The authority coefficient was 0.729 ±0.172. The expert positive coefficient was 94.12% (32/34) in the first round and 100% (32/32) in the second round. The harmonious coefficients of importance, feasibility and rationality in the second round were 0.493 (PDelphi method is a rapid, effective and feasible method in this field.

  20. Meeting drinking water and sanitation targets of MDGs. Water use & competition in sub-Saharan Africa

    NARCIS (Netherlands)

    Hoek van der, Marjolijn

    2006-01-01

    Access to safe drinking water and improved sanitation is of vital importance for human beings. Improving the access to safe drinking water and improved sanitation in developing countries is therefore one of the Millennium Development Goals (MDGs) to be me

  1. Information Technology Strategies for Honor Society and Organization Membership Retention in Online Nursing Programs.

    Science.gov (United States)

    Hopkins, Emily E; Wasco, Jennifer J

    Membership retention in an honor society or organization is of utmost importance for sustainability. However, retaining members in organizations that serve online education nursing students can be a challenging task. Understanding the importance of creating a sense of community to promote retention within an honor society chapter, nursing faculty at a small private university implemented different online approaches. This article highlights successful information technology strategies to promote membership retention in organizations for online nursing students.

  2. The Economic Returns to Graduating with Honors - Evidence from Law Graduates

    OpenAIRE

    Schumann, Mathias; Freier, Ronny; Siedler, Thomas

    2014-01-01

    This paper studies the causal effects of graduating from university with an honors degree on subsequent labor market outcomes. While a rich body of literature has focused on estimating returns to human capital, few studies have analyzed returns at the very top of the education distribution. We highlight the importance of honors degrees for future labor market success in the context of German law graduates. Using a difference-in-differences research design combined with entropy balancing, we f...

  3. Roll paper pilot. [mathematical model for predicting pilot rating of aircraft in roll task

    Science.gov (United States)

    Naylor, F. R.; Dillow, J. D.; Hannen, R. A.

    1973-01-01

    A mathematical model for predicting the pilot rating of an aircraft in a roll task is described. The model includes: (1) the lateral-directional aircraft equations of motion; (2) a stochastic gust model; (3) a pilot model with two free parameters; and (4) a pilot rating expression that is a function of rms roll angle and the pilot lead time constant. The pilot gain and lead time constant are selected to minimize the pilot rating expression. The pilot parameters are then adjusted to provide a 20% stability margin and the adjusted pilot parameters are used to compute a roll paper pilot rating of the aircraft/gust configuration. The roll paper pilot rating was computed for 25 aircraft/gust configurations. A range of actual ratings from 2 to 9 were encountered and the roll paper pilot ratings agree quite well with the actual ratings. In addition there is good correlation between predicted and measured rms roll angle.

  4. Plasmonic color metasurfaces fabricated by a high speed roll-to-roll method

    DEFF Research Database (Denmark)

    Murthy, Swathi; Pranov, Henrik; Feidenhans'l, Nikolaj Agentoft

    2017-01-01

    Lab-scale plasmonic color printing using nano-structured and subsequently metallized surfaces have been demonstrated to provide vivid colors. However, upscaling these structures for large area manufacturing is extremely challenging due to the requirement of nanometer precision of metal thickness....... In this study, we have investigated a plasmonic color meta-surface design that can be easily upscaled. We have demonstrated the feasibility of fabrication of these plasmonic color surfaces by a high-speed roll-to-roll method, comprising roll-to-roll extrusion coating at 10 m min-1 creating a polymer foil having...... 100 nm deep pits of varying sub-wavelength diameter and pitch length. Subsequently this polymer foil was metallized and coated also by high-speed roll-to-roll methods. The perceived colors have high tolerance towards the thickness of the metal layer, when this thickness exceeds the depths of the pits...

  5. Nursing Care at the Time of Death: A Bathing and Honoring Practice.

    Science.gov (United States)

    Rodgers, Debra; Calmes, Beth; Grotts, Jonathan

    2016-05-01

    To explore family members' experience of a bathing and honoring practice after a loved one's death in the acute care setting.
. A descriptive, qualitative design using a semistructured telephone interview script.
. The Inpatient Adult Oncology Unit at Santa Barbara Cottage Hospital in California. 
. 13 family members who participated in the bathing and honoring practice after their loved one's death on the oncology unit.
. Participants were selected by purposive sampling and interviewed by telephone three to six months after their loved one's death. Interviews using a semistructured script with open-ended questions were recorded, transcribed, verified, and analyzed using phenomenologic research techniques to identify common themes of experience.
. 24 first-level themes and 11 superordinate themes emerged from the data. All participants indicated that the bathing and honoring practice was a positive experience and supported the grieving process. The majority found the practice to be meaningful and stated that it honored their loved one. Many expressed that the bathing and honoring was spiritually significant in a nondenominational way and that they hope it will be made available to all families of patients who die in the hospital. 
. After patient death, a bathing and honoring practice with family member participation is positive and meaningful, and it supports family members' initial grieving.
. This study is a first step toward establishing specific nursing interventions as evidence-based practice that can be incorporated in routine nursing care for patients and families at the end of life.

  6. Does global progress on sanitation really lag behind water? An analysis of global progress on community- and household-level access to safe water and sanitation.

    Science.gov (United States)

    Cumming, Oliver; Elliott, Mark; Overbo, Alycia; Bartram, Jamie

    2014-01-01

    Safe drinking water and sanitation are important determinants of human health and wellbeing and have recently been declared human rights by the international community. Increased access to both were included in the Millennium Development Goals under a single dedicated target for 2015. This target was reached in 2010 for water but sanitation will fall short; however, there is an important difference in the benchmarks used for assessing global access. For drinking water the benchmark is community-level access whilst for sanitation it is household-level access, so a pit latrine shared between households does not count toward the Millennium Development Goal (MDG) target. We estimated global progress for water and sanitation under two scenarios: with equivalent household- and community-level benchmarks. Our results demonstrate that the "sanitation deficit" is apparent only when household-level sanitation access is contrasted with community-level water access. When equivalent benchmarks are used for water and sanitation, the global deficit is as great for water as it is for sanitation, and sanitation progress in the MDG-period (1990-2015) outstrips that in water. As both drinking water and sanitation access yield greater benefits at the household-level than at the community-level, we conclude that any post-2015 goals should consider a household-level benchmark for both.

  7. 8th Symposium Honoring Mathematical Physicist Jean-Pierre Vigier

    CERN Document Server

    Kauffman, Louis H; Rowlands, Peter; The Physics of Reality : Space, Time, Matter, Cosmos

    2013-01-01

    A truly Galilean class volume as it also introduces a new method in theory formation this time completing the tools of epistemology. This book covers a broad spectrum of theoretical and mathematical physics by researchers from over 20 nations from four continents. Like Vigier himself, the Vigier symposia are noted for addressing avant-garde cutting-edge topics in contemporary physics. Among the six proceedings honoring J-P Vigier this is perhaps the most exciting one as several important breakthroughs are introduced for the first time. The most interesting breakthrough in view of the recent NIST experimental violations of QED is a continuation of pioneering work by Vigier on Tight Bound States in Hydrogen. The new experimental protocol described not only promises empirical proof of large-scale extra dimensions in conjunction with avenues for testing string theory but also implies the birth of the field of Unified Field Mechanics ushering in a new age of discovery. Work on quantum computing redefines the qubit...

  8. Rolling of molybdenum and niobium tubes on cold-rolling mill with high stiff stand

    Energy Technology Data Exchange (ETDEWEB)

    Potapov, I N; Shejkh-Ali, A D; Filimonov, G V; Lunev, A G

    1984-03-01

    To develop the technique of tube production the process of rolling is studied and comparative evaluation of the structure formed is carried out. It is shown that billets of rods deformed by screw rolling have the improved plastic properties and are deformed on cold-rolling mill (CRM) with a high degree of reduction without defect formation. High stiff stand of the CRM permits to produce high-quality molybdenum tubes.

  9. Decision Support for the Rolling Stock Dispatcher

    DEFF Research Database (Denmark)

    Groth, Julie Jespersen

    Real-time recovery is receiving a fast growing interest in an increasingly competitive railway operation market. This thesis considers the area of rolling stock dispatching which is one of the typical real-time railway dispatching problems. All work of the thesis is based on the network...... and planning processes of the railway operator DSB S-tog a/s. In the thesis the problems existing in the railway planning process from the strategic to real-time level are briefly sketched. Network planning, line planning, timetabling, crew and rolling stock planning is outlined and relevant references...... are given. Specifically the thesis references the operation research studies based on the railway operation of DSB S-tog a/s. Subsequently the process of dispatching is outlined with a specific emphasis on rolling stock. The rolling stock recovery problem is the problem of assigning train units to train...

  10. Terras: NATO õppuste roll Euroopas kasvab

    Index Scriptorium Estoniae

    2013-01-01

    Kaitseväe juhataja kindralmajor Riho Terrase sõnul suureneb lähiaastatel NATO õppuste roll Euroopas, sest Afganistanis sõdides saadud kogemust on vaja säilitada ning kasutada seda kollektiivkaitse tugevdamiseks

  11. Disk partition function and oscillatory rolling tachyons

    International Nuclear Information System (INIS)

    Jokela, Niko; Jaervinen, Matti; Keski-Vakkuri, Esko; Majumder, Jaydeep

    2008-01-01

    An exact cubic open string field theory rolling tachyon solution was recently found by Kiermaier et al and Schnabl. This oscillatory solution has been argued to be related by a field redefinition to the simple exponential rolling tachyon deformation of boundary conformal theory. In the latter approach, the disk partition function takes a simple form. Out of curiosity, we compute the disk partition function for an oscillatory tachyon profile, and find that the result is nevertheless almost the same

  12. Maintenance in Railway Rolling Stock Rescheduling for Passenger Railways

    NARCIS (Netherlands)

    J.C. Wagenaar (Joris); L.G. Kroon (Leo)

    2015-01-01

    textabstractThis paper addresses the Rolling Stock Rescheduling Problem (RSRP), while taking maintenance appointments into account. After a disruption, the rolling stock of passenger trains has to be rescheduled in order to maintain a feasible rolling stock circulation. A limited number of rolling

  13. The human right to water and sanitation: reflections on making the system effective

    NARCIS (Netherlands)

    Obani, P.; Gupta, J.; Bhaduri, A.; Bogardi, J.; Leentvaar, J.; Marx, S.

    2014-01-01

    The Millenium Development Goal (MDG) on water has been more successful than the MDG on sanitation. Does this have implications for the human right to sanitation? This chapter argues that there are key differences between access to water and sanitation in terms of the legal content of both, the

  14. 9 CFR 147.26 - Procedures for establishing isolation and maintaining sanitation and good management practices...

    Science.gov (United States)

    2010-01-01

    ... and maintaining sanitation and good management practices for the control of Salmonella and Mycoplasma... Sanitation Procedures § 147.26 Procedures for establishing isolation and maintaining sanitation and good management practices for the control of Salmonella and Mycoplasma infections. (a) The following procedures...

  15. Evaluation of Small-Scale Providers of Water Supply and Sanitation Services in Peru

    OpenAIRE

    World Bank

    2007-01-01

    The Water and Sanitation Program (WSP), administered by the World Bank, helps countries find sustainable solutions to ensure efficient delivery of the quality water supply and sanitation services the population demands. The WSP is carrying out a systematic analysis in several countries to identify the role of small-scale providers (SSP) of water and sanitation services to poor populations ...

  16. 46 CFR 166.15 - Training for maintenance of discipline; ship sanitation; fire and lifeboat drills.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Training for maintenance of discipline; ship sanitation... maintenance of discipline; ship sanitation; fire and lifeboat drills. All students shall be trained to obey... the fundamentals of ship sanitation as prescribed by law and regulations, and shall be given intensive...

  17. 7 CFR 70.110 - Requirements for sanitation, facilities, and operating procedures in official plants.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Requirements for sanitation, facilities, and operating... Requirements for sanitation, facilities, and operating procedures in official plants. (a) The requirements for sanitation, facilities, and operating procedures in official plants shall be the applicable provisions stated...

  18. 21 CFR 111.360 - What are the requirements for sanitation?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What are the requirements for sanitation? 111.360... for Manufacturing Operations § 111.360 What are the requirements for sanitation? You must conduct all manufacturing operations in accordance with adequate sanitation principles. ...

  19. Sanitation and its Impact on the Bacteriological Quality of Water: A ...

    African Journals Online (AJOL)

    Water constitutes about 70% of the earth's total mass and all life is dependent on water. Inadequate sanitation is a major cause of disease worldwide and improving sanitation is known to have a significant beneficial impact on health both in households and across communities. Water and sanitation are closely related and ...

  20. Does Clean Water Make You Dirty? Water Supply and Sanitation in the Philippines

    Science.gov (United States)

    Bennett, Daniel

    2012-01-01

    Water supply investments in developing countries may inadvertently worsen sanitation if clean water and sanitation are substitutes. This paper examines the negative correlation between the provision of piped water and household sanitary behavior in Cebu, the Philippines. In a model of household sanitation, a local externality leads to a sanitation…

  1. Roll-to-roll printed silver nanowires for increased stability of flexible ITO-free organic solar cell modules

    DEFF Research Database (Denmark)

    Benatto, Gisele Alves dos Reis; Roth, Bérenger; Corazza, Michael

    2016-01-01

    We report the use of roll-to-roll printed silver nanowire networks as front electrodes for fully roll-to-roll processed flexible indium-tin-oxide (ITO) free OPV modules. We prepared devices with two types of back electrodes, a simple PEDOT:PSS back electrode and a PEDOT:PSS back electrode...

  2. 75 FR 42782 - Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia

    Science.gov (United States)

    2010-07-22

    ...)] Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia AGENCY: United... Brazil and Japan, and the suspended investigation on hot-rolled steel from Russia. SUMMARY: The... Japan, and the suspended investigation on hot-rolled steel from Russia would be likely to lead to...

  3. 75 FR 62566 - Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia

    Science.gov (United States)

    2010-10-12

    ...)] Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia AGENCY: United... antidumping duty investigation on hot-rolled steel from Russia. SUMMARY: The Commission hereby gives notice of... suspended investigation on hot-rolled steel from Russia would be likely to lead to continuation or...

  4. The use of sanitation products in milk and cheese production

    Directory of Open Access Journals (Sweden)

    Samir Kalit

    2001-06-01

    Full Text Available Considering hygienic conditions in cheese production the aim of thispaper was to investigate the influence of using some sanitation* products in milk and cheese production on family farms. This investigation was a part of the project “Improving the quality of Tounj cheese produced on family farms”. By use of the sanitation products, during milk production, significant (P<0.01 decrease of geometrical mean of total bacterial count from 3.54 x 105 to 8 x 103 in mL of milk, as well as significant (P<0.01 decrease of geometric mean of somatic cell count from 3.1 x 105 to 2.4 x 105 in mL of milk was observed. The ratio of hygienically unacceptable cheeses, according to the Regulations of microbial standards for foods (NN 46/94., significantly (P<0.01 decreased as well. Because of the new requests and standards, the sanitation products are more in use in both milk and cheese production on family farms. Investigated sanitation products were suitable for use in milk and Tounj cheese production.

  5. An assessment of environmental sanitation in an urban community ...

    African Journals Online (AJOL)

    Inadequate environmental sanitation has been recognized as a public health hazard worldwide. In some Nigerian cities, living with waste as part of the natural environment has become a way of life. This study examined the sanitary condition of an urban community in Akwa Ibom State, Nigeria. It used a cross sectional ...

  6. Ecological situation of Tengiz deposit and way of it's sanitation

    International Nuclear Information System (INIS)

    Kenzhegaliev, A.

    1997-01-01

    Ecological situation in Tengiz region still the day of starting first turn of complex may be considered as normal. It means that antropogenous load on the environment from the Tengiz gas refinery is insignificant little. Regime observation for purpose of sanitation carry out by TengizChevrOil J V. (author)

  7. Lessons Learned from a Third World Water and Sanitation Project.

    Science.gov (United States)

    Jenkins-McLean, Terri

    1991-01-01

    The seven-step project cycle used in a water sanitation project in Belize from 1986-89 is described. The direct involvement of community organizations, village councils, family gatherings, parent-teacher organizations, political groups, Village Health Committees, and volunteer organizations is emphasized. (CW)

  8. WASH (Water and Sanitation for Health) Rainwater Information Center.

    Science.gov (United States)

    Campbell, D.

    1986-01-01

    Describes project funded by U.S. Agency for International Development to provide short-term technical assistance (general, technology transfer, institutional development and training, information support) to rural and urban fringe water supply and sanitation projects. Initial steps, special collection, and future components of rainwater network…

  9. The status of hygiene and sanitation practice among rural model ...

    African Journals Online (AJOL)

    2mikitser

    Background: Since the Health Extension Program (HEP) started the training and graduation ... and cultural reasons were mentioned as factors that hindered the ... of the World Health Organization (WHO) once said; ... sanitation, family health, and health education and ... model and non-model households using interviewer.

  10. water, sanitation and hygiene in community- based care

    African Journals Online (AJOL)

    PUBLICATIONS1

    in home-based care and the implications on people living with HIV/AIDS/TB, their ... Data was collected using participant observation of care-giving activities; ... this affects the work of CHW. ..... Using water and sanitation as an entry point.

  11. Water demand characteristics of shared water and sanitation facilities

    African Journals Online (AJOL)

    The provision of communal water and sanitation facilities has been mandated by the South African Government as an interim measure for informal settlement upgrading. These services form the first step in the upgrading process and are essential in meeting the basic needs of the community. The eThekwini municipality is ...

  12. Domestic Water Supply, Sanitation and Health in Rural Ghana ...

    African Journals Online (AJOL)

    The research notes that adequate provision of potable water and safe ... quality of water that is consumed is well-recognised as an important transmission route ... diarrhoeal disease due to unsafe water. sanitation and hygiene the 6th highest burden or .... and 'hygiene', have direct consequences for health in relation to both.

  13. 21 CFR 123.11 - Sanitation control procedures.

    Science.gov (United States)

    2010-04-01

    ... records are subject to the requirements of § 123.9. (d) Relationship to HACCP plan. Sanitation controls may be included in the HACCP plan, required by § 123.6(b). However, to the extent that they are monitored in accordance with paragraph (b) of this section they need not be included in the HACCP plan, and...

  14. Market Sanitation: A Case Study of Oregbeni Market Benin - City ...

    African Journals Online (AJOL)

    Poor market sanitation is an intractable problem in Nigeria and has contributed to the spread of infectious diseases and environmental degradation. This study was undertaken to determine the awareness and practice of solid waste management in market places among market users. It involved 180 store owners and ...

  15. New sanitation techniques for controlling tephritid fruit flies (Diptera ...

    African Journals Online (AJOL)

    New approaches to sanitation in a cropping system susceptible to tephritid fruit flies (Diptera tephritidae) in Hawaii have been investigated. Six trials were conducted in tent-like structures to demonstrate that melon fly larvae (Bacrocera cucurbitae, Coquillett) are not reliably controlled by malathion sprayed on the surface of ...

  16. Reflections on Public Health: Captain Hart and Sanitation

    Centers for Disease Control (CDC) Podcasts

    This podcast consists of segments of an interview conducted by Capt. Kathleen McDuffie, CDC, with Capt. Russell Hart, a 100 year old retired sanitary engineer of the U.S. Public Health Service Commissioned Corps as he reflects on his work in environmental sanitation and the development of local health departments. The interview was conducted in 2006.

  17. Sanitation in wilderness: Balancing minimum tool policies and wilderness values

    Science.gov (United States)

    Paul R. Lachapelle

    2000-01-01

    Officials with the four wilderness managing agencies are faced with balancing wilderness preservation values and the minimum tool policies of their respective agencies. One example is the management of sanitation, particularly human waste and the often intrusive infrastructure that accompanies its treatment and disposal. Because the treatment and disposal of human...

  18. Investigation into sanitation options for rural Kien Giang Province, Vietnam

    Directory of Open Access Journals (Sweden)

    Tracey Main

    2013-08-01

    Full Text Available This project was developed during a three month internship with Habitat for Humanity Vietnam (HFHV supported by the Royal Melbourne Institute of Technology (RMIT Engineers Without Borders Australia (EWB Development Scholarship for 2010/2011. During discussions with HFHV staff, several areas of concern with regards to sanitation and hygiene practices in rural Kien Giang Province were raised. These included the widespread use of drop toilets over waterways, poor hygiene practices in impoverished households and in schools, lack of sanitation options for HFHV construction programmes and no facilities for emptying existing septic tanks of accumulated sludge. This article evaluates existing sanitation technologies for introduction into HFHV’s construction programme in Kien Giang Province. It was determined that for onsite disposal of sanitation system products, the double dehydration vault, the composting chamber and the urine collection tank were appropriate technologies. Pit latrines or variations thereof were deemed inappropriate because of the high watertables. Anaerobic reactor systems were deemed inappropriate as they accumulate pathogenic sludge and effluent for which there is currently no appropriate treatment that meets the project design criteria. As onsite disposal system demand may be low due to cultural and social taboos, an investigation and discussion into offsite treatment was also undertaken. It was determined that a co-composting facility would be the most appropriate offsite treatment technology.

  19. Focus Cities : Economic Incentives for Improving Water, Sanitation ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Focus Cities : Economic Incentives for Improving Water, Sanitation and Solid Waste Services in Jakarta (Indonesia). Since 2001 Indonesia has been ... Sewer networks serve only a small proportion of the population, solid waste collection is inconsistent and waste disposal sites are inadequate. Cholera and malaria are ...

  20. Assessing users' experience of shared sanitation facilities: A case ...

    African Journals Online (AJOL)

    In the academic literature, users' feedback and experiences of technologies in the post-implementation phase have received scarce attention. The purpose of this study is to investigate users' experience of sanitation technologies in the early post-implementation phase, when opportunities for remedial intervention are still ...

  1. Hygiene and sanitation requirements in Danish biogas plants

    Energy Technology Data Exchange (ETDEWEB)

    Bendixen, H J

    1997-08-01

    According to Danish regulations, systematic pathogen reducing treatment is required, when industrial by-products and waste products, and urban waste, ie garbage from households and sewage sludge, are processed, before being used - without restrictions - as fertilizers on agricultural land. An adequate pathogen reducing effect (PRE) can be achieved in the digestion tanks and sanitation tanks of the biogas plants, provided they are operated correctly and respect the criteria of the official requirements. The FS-method is a microbiological indicator method based on faecal streptococci (enterococci) (FS). It may be used to check the sanitation effect achieved by the treatment in a tank. The effect is expressed numerically by the log{sub 10}-reduction of the numbers of FS measured in the biomass before and after treatment. The PRE was examined in 10 large-scale biogas plants during a period of 2-3 years. It was demonstrated that properly directed and well-functioning thermophilic digestion tanks ensure the removal of most pathogenic microorganisms from organic waste and slurry. The removal of pathogens by the treatment in mesophilic digestion tanks is incomplete. Systematic studies of the processes of inactivation of bacteria and virus in slurry and in animal tissues gave evidence that the PRE is enhanced in the microbiological environment of thermophilic digestion tanks. The sanitation criteria, ie combinations of temperature/time, for the processing of biomass in digestion tanks and sanitation tanks in biogas plants are specified. (au) 19 refs.

  2. User perceptions regarding sanitation technologies in South Africa

    CSIR Research Space (South Africa)

    Duncker, Louiza C

    2014-09-01

    Full Text Available , misuse/non-use and lack of proper maintenance, therefore placing the sustainability of these sanitation systems in question. Even if the technology was designed and built well, the use of the technology and its acceptance by the user proved to be the most...

  3. The status of school sanitation facilities in some selected primary ...

    African Journals Online (AJOL)

    Background: There is a growing demand on school hygiene and sanitation facilities given the growing number of school enrolment in Ethiopia. A safe school environment plays a key role in facilitating education and enduring pupils with improved life skills. Although there is much attention given for the expansion of schools ...

  4. Water, sanitation and hygiene in community based care ...

    African Journals Online (AJOL)

    Majority of the HIV/AIDS patients in South Africa receive health care services at home. However, limited studies have been conducted to examine the water, sanitation and hygiene (WASH) situation in the homes of the care receivers and its impact on community-based care. The main objective of this study was to explore ...

  5. Focus Cities : Economic Incentives for Improving Water, Sanitation ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Since 2001 Indonesia has been undergoing large-scale decentralization, transferring various responsibilities to regional and local governments. Local governments are now responsible for water and sanitation infrastructure, yet most lack the resources and technical expertise to tackle the challenge. Jakarta's largest slum ...

  6. Hygiene and sanitation risk factors of diarrhoeal disease among ...

    African Journals Online (AJOL)

    Background: Diarrhoea diseases are among the leading causes of morbidity and mortality in under-five-children (U-5C) in Nigeria. Inadequate safe water, sanitation, and hygiene account for the disease burden. Cases of diarrhoea still occur in high proportion in the study area despite government-oriented interventions.

  7. Radiation-chemical sanitation of dissolved pollutants and environmental protection

    International Nuclear Information System (INIS)

    Petrukhin, N.V.; Putilov, A.V.

    1986-01-01

    Radiation-chemical sanitation of dissolved toxic pollutants resulted from the production processes of different substances and modern equipment operation is considered. The processes of fundamental industrial sewage processing and, as a result, features of practically total disposal of dissolved toxic agents are considered for the first time

  8. Design and implementation of participatory hygiene and sanitation ...

    African Journals Online (AJOL)

    Background: The study is a continuation of a research carried out in Luweero district in Uganda1. It investigated whether PHAST was a suitable tool for reducing transmission of soil transmitted helminths. PHAST means Participatory Hygiene and Sanitation Transformation; a participatory approach that uses visual tools to ...

  9. 25 CFR 141.17 - Health and sanitation requirements.

    Science.gov (United States)

    2010-04-01

    ... handling any food sold by a reservation business. (d) Any person whom the Service Unit Director of the... Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FINANCIAL ACTIVITIES BUSINESS PRACTICES ON THE NAVAJO, HOPI AND ZUNI RESERVATIONS General Business Practices § 141.17 Health and sanitation...

  10. Influence of sanitation on the physico-chemical and microbiological ...

    African Journals Online (AJOL)

    The present study was carried out in order to evaluate the effect of chlorinated and ozonized water on the physico-chemical characteristics of broccoli, produced under organic and conventional cultivation procedures. Organic and conventional broccolis were subjected to two sanitation treatments, using chlorine and ozone, ...

  11. 7 CFR 2902.18 - Hand cleaners and sanitizers.

    Science.gov (United States)

    2010-01-01

    ..., DEPARTMENT OF AGRICULTURE GUIDELINES FOR DESIGNATING BIOBASED PRODUCTS FOR FEDERAL PROCUREMENT Designated... the purposes of this rule. (b) Minimum biobased content. The minimum biobased content requirement for all hand cleaners and/or sanitizers shall be based on the amount of qualifying biobased carbon in the...

  12. Analyzing sanitation characteristics in the urban slums of East Africa

    NARCIS (Netherlands)

    Szanto, G.L.; Letema, S.C.; Tukahirwa, J.; Mgana, S.; Oosterveer, P.J.M.; Buuren, van J.C.L.

    2012-01-01

    Urban slums in East Africa exhibit deplorable sanitary conditions. Despite (inter)national efforts, slum sanitation provision remains inadequate and the projected population growth forecasts a worsening of this crisis. The core of the problem is that available knowledge about the local feasibility

  13. Consumer Cooperatives for Delivery of Urban Water and Sanitation Services

    OpenAIRE

    Ruiz-Mier, Fernando; Ginneken, Meike van

    2008-01-01

    To find the optimal delivery model for urban water supply and sanitation (WSS) services, one must look beyond ownership structures to the practices and designs that support good performance. Consumer cooperatives are often attractive institutional models. This note focuses on a Bolivian cooperative that is one of the most successful water cooperatives in Latin America. Successful cooperatives ...

  14. The status of water and sanitation among Pacific Rim nations.

    Science.gov (United States)

    Arnold, Robert G; Heyworthz, Jane; Sáez, A Eduardo; Rodriguez, Clemencia; Weinstein, Phil; Ling, Bo; Memon, Saima

    2011-01-01

    Analysis of relationships among national wealth, access to improved water supply and sanitation facilities, and population health indices suggests that the adequacy of water resources at the national level is a poor predictor of economic development--namely, that low water stress is neither necessary nor sufficient for economic development at the present state of water stress among Pacific Rim nations. Although nations differ dramatically in terms of priority provided to improved water and sanitation, there is some level of wealth (per capita GNP) at which all nations promote the development of essential environmental services. Among the Pacific Rim countries for which there are data, no nation with a per capita GNP > US$18,000 per year has failed to provide near universal access to improved water supply and sanitation. Below US$18,000/person-year, however, there are decided differences in the provision of sanitary services (improved water supply and sanitation) among nations with similar economic success. There is a fairly strong relationship between child mortality/life expectancy and access to improved sanitation, as expected from the experiences of developed nations. Here no attempt is made to produce causal relationships among these data. Failure to meet Millennium Development Goals for the extension of improved sanitation is frequently evident in nations with large rural populations. Under those circumstances, capital intensive water and sanitation facilities are infeasible, and process selection for water/wastewater treatment requires an adaptation to local conditions, the use of appropriate materials, etc., constraints that are mostly absent in the developed world. Exceptions to these general ideas exist in water-stressed parts of developed countries, where water supplies are frequently augmented by water harvesting, water reclamation/reuse, and the desalination of brackish water resources. Each of these processes involves public acceptance of water

  15. Materials of research-practical conference dedicated to 70-anniversary of sanitation, hygiene and occupational diseases research institute 'Actual problems of hygiene, sanitation and ecology'

    International Nuclear Information System (INIS)

    Iskandarov, T.I.; Kamil'dzhanov, A.Kh.

    2004-01-01

    The Research-practical conference dedicated to 70-anniversary of sanitation, hygiene and occupational diseases research institute 'Actual problems of hygiene, sanitation and ecology' was held on 2004 in Tashkent, Uzbekistan. Specialists discussed various aspects of actual problems of sanitation, hygiene, occupational diseases and ecology. They discussed also some aspects of radiology and nuclear medicine, radiation protection and dosimetry, radiation and other environmental pollutant effect on living organisms and biological materials. More than 250 talks were presented in the meeting. (k.m.)

  16. Book review, Sanità animale, Salvatore Montinaro

    Directory of Open Access Journals (Sweden)

    Manuel Graziani

    2013-03-01

    Full Text Available Un manuale strutturato per fornire un quadro d'insieme della materia e chiarire il metodo logico con il quale trovare i riferimenti scientifici e normativi necessari per affrontare il lavoro di tutti i giorni: così viene presentato Sanità animale, un volume che rispetto ai pochi testi analoghi sul mercato, si distingue per l'utilizzo parco di stralci normativi, comunque sistematicamente citati, in modo da renderne agevole la consultazione. L'attenzione maggiore è spostata verso l'analisi scientifica e normativa delle problematiche affrontate, delle peculiarità delle singole malattie e dei principi d'intervento sul campo. Il medico veterinario Salvatore Montinaro, forte dell'esperienza maturata in diverse amministrazioni (Regione, ASL, IZS riesce nell'intento di descrivere in maniera semplice, ma completa e dettagliata, il funzionamento della sanità animale e della lotta alle malattie diffusive animali. Come esplicita nell'introduzione del capitolo Norme Veterinarie e SSN: "Non si cercherà in questa sede di ripercorrere la storia della veterinaria pubblica, dal codice di Hammurabi in poi: ci si limiterà piuttosto a uno sguardo retrospettivo nella storia recente, finalizzato a identificare in modo sistematico, partendo dal generale per arrivare al particolare, i principali punti di riferimento che caratterizzano il quadro normativo della sanità pubblica veterinaria". Anche per questo il manuale è indirizzato soprattutto a coloro che già lavorano, o che intendono lavorare, nei servizi veterinari di sanità animale delle Aziende Sanitarie Locali, ponendosi come un testo "professionale" e un sussidio tecnico da avere a portata di mano. Salvatore Montinaro, classe 1967, svolge la sua attività professionale come dirigente del servizio veterinario di sanità animale della ASL di Nuoro, inoltre, fa parte del gruppo di esperti comunitari del TAIEX ed è consulente tecnico della FAO.

  17. Hydrothermal carbonization as innovative technology in sustainable sanitation in Tanzania

    Energy Technology Data Exchange (ETDEWEB)

    Krause, Ariane [Engineers Without Boarders (Germany), Berlin (DE). Project ' ' Carbonization as Sanitation' ' (CaSa)

    2011-07-01

    The need for sustainable systems is apparent as climate change and other adverse anthropogenic activities continue to negatively affect the soil fertility in Africa. One of the indicators of the loss of soil fertility is the continuous decrease in soil organic matter, which is the major building block of a fertile soil. This is mainly attributed to the inappropriate practice of human-beings of taking more substances from the ecosystem than the amount replaced. As the soil fertility is increasingly lost, food insecurity, due to dropped productivity of the soil, is becoming a critical issue in many areas of Africa, Tanzania is not any different in this respect. On the other hand, most people in rural areas of Africa still lack possibilities to cover their daily energy needs in a more sustainable way and many people mainly rely on firewood. This, in turn, has an adverse impact on the climate and the soil, causing a local viscous circle of poor soil and productivity conditions. Moreover, the sanitation coverage of those areas is very low and there is a need for appropriate sanitation systems. Therefore, the aim of this project is, to conduct research on the possibility of establishing a self-sustaining system for the rural areas of Kagera, Tanzania, to address the three basic issues: sanitation, energy supply and soil fertility. The system consists of a small-scale biogas digester, a urine diverting dehydrating toilet (UDDT) and an adaptive hydrothermal carbonization (HTC) unit. Biogas is produced from crop residues and other domestic organic waste. The fermentation residues and the dehydrated fecal matter from the UDDT is then treated with HTC. The carbonised and sanitized residue is then applied as soil amendment to improve the soil fertility as manifested by the Terra Preta in the Amazon. This holistic approach is a new development in ecological sanitation. Therefore, a comprehensive sustainability assessment including environmental, economic and socio

  18. Adopt or Adapt: Sanitation Technology Choices in Urbanizing Malawi.

    Science.gov (United States)

    Chunga, Richard M; Ensink, Jeroen H J; Jenkins, Marion W; Brown, Joe

    2016-01-01

    This paper presents the results of a mixed-methods study examining adaptation strategies that property owners in low-income, rapidly urbanizing areas in Malawi adopt to address the limitations of pit latrines, the most common method of disposing human excreta. A particular challenge is lack of space for constructing new latrines as population density increases: traditional practice has been to cap full pits and simply move to a new site, but increasing demands on space require new approaches to extend the service life of latrines. In this context, we collected data on sanitation technology choices from January to September 2013 through 48 in-depth interviews and a stated preference survey targeting 1,300 property owners from 27 low-income urban areas. Results showed that property owners with concern about space for replacing pit latrines were 1.8 times more likely to select pit emptying service over the construction of new pit latrines with a slab floor (p = 0.02) but there was no significant association between concern about space for replacing pit latrines and intention to adopt locally promoted, novel sanitation technology known as ecological sanitation (ecosan). Property owners preferred to adapt existing, known technology by constructing replacement pit latrines on old pit latrine locations, reducing the frequency of replacing pit latrines, or via emptying pit latrines when full. This study highlights potential challenges to adoption of wholly new sanitation technologies, even when they present clear advantages to end users. To scale, alternative sanitation technologies for rapidly urbanising cities should offer clear advantages, be affordable, be easy to use when shared among multiple households, and their design should be informed by existing adaptation strategies and local knowledge.

  19. Preorganization of Nanostructured Inks for Roll-to-Roll-Coated Polymer Solar Cells

    DEFF Research Database (Denmark)

    Krebs, Frederik C; Senkovskyy, Volodymyr; Kiriy, Anton

    2010-01-01

    , a preorganized ink was obtained that was used to make polymer solar cell modules in a full roll-to-roll coating and printing process operating in ambient air. The polymer solar cells were thus prepared by a mixture of slot die and flat-bed screen printing. Various polymer solar cell modules were prepared ranging...

  20. Technology development for roll-to-roll production of organic photovoltaics

    NARCIS (Netherlands)

    Galagan, Y.O.; Vries, I.G. de; Langen, A.P.; Andriessen, H.A.J.M.; Verhees, W.J.H.; Veenstra, S.C.; Kroon, J.M.

    2011-01-01

    In order to reach the objective of low-cost, large area organic photovoltaic systems, we build up a knowledge base concerning the influence of process conditions on the performance of polymer solar cells. A large area solar cell module, with roll-to-roll coated PEDOT:PSS and photoactive layers

  1. Material-Process-Performance Relationships for Roll-to-Roll Coated PEM Electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Mauger, Scott; Neyerlin, K.C.; Stickel, Jonathan; Ulsh, Michael; More, Karren; Wood, David

    2017-04-26

    Roll-to-roll (R2R) coating is the most economical and highest throughput method for producing fuel cell electrodes. R2R coating encompasses many different methodologies to create uniform films on a moving web substrate. Here we explore two coating methods, gravure and slot die, to understand the impacts of each on film uniformity and performance.

  2. Roll-to-roll paper sensors (ROPAS); Wireless communicating sensors on paper in the logistic chain

    NARCIS (Netherlands)

    Rentrop, C.; Rubingh, J.E.J.M.; Lelieveld, R.; Sandberg, H.

    2014-01-01

    The ROPAS project (Roll-to-roll paper sensors) combines high end electronics and wireless sensors with low cost paper substrates and processing techniques that can be applied on a large scale. Paper is the next step in the printed electronics roadmap of utilising cheaper substrate materials as a

  3. A Coupled Model for Work Roll Thermal Contour with Subsectional Cooling in Aluminum Strip Cold Rolling

    Directory of Open Access Journals (Sweden)

    Shao Jian

    2014-10-01

    Full Text Available Little attention had been given to the evaluation of subsectional cooling control ability under complicated working conditions. In this paper, heat generation was calculated by using finite difference method. Strip hardening, work roll elastic deformation and elastic recovery of strip were taken into account. The mean coefficient of convective heat transfer on work roll surface was simulated by FLUENT. Calculation model had used the alternative finite difference scheme, which improved the model stability and computing speed. The simulation result shows that subsectional cooling control ability is different between different rolling passes. Positive and negative control abilities are roughly the same in the same pass. The increase of rolled length, working pressure of header and friction coefficient has positive effect on subsectional cooling control ability, and the rolling speed is on the contrary. On the beginning of the pass, when work roll surface has not reached the stable temperature, control ability of subsectional cooling is mainly affected by rolled length. The effect of mean coefficient of convective heat transfer and coefficient of friction is linear. When rolling speed is over 500 m/min, control ability of subsectional cooling becomes stable.

  4. Pasión y honor. elementos culturales del homicidio en la provincia de Soto (Santander) de 1903 a 1930

    OpenAIRE

    Jairo Antonio Melo Flórez

    2010-01-01

    Este artículo relaciona algunos elementos culturales de los conflictos interpersonales como son aquellos enmarcados en los conceptos de honor y pasión, entendiéndolos como sentimientos que adquieren sentido en las relaciones sociales, y que se pueden evidenciar en los casos de homicidio en la Provincia de Soto entre 1903 y 1930. El honor por lo general ha sido tratado desde la perspectiva de los hombres honorables, pero también existe una forma de honor en las personas del común, en un sentid...

  5. Influences of rolling method on deformation force in cold roll-beating forming process

    Science.gov (United States)

    Su, Yongxiang; Cui, Fengkui; Liang, Xiaoming; Li, Yan

    2018-03-01

    In process, the research object, the gear rack was selected to study the influence law of rolling method on the deformation force. By the mean of the cold roll forming finite element simulation, the variation regularity of radial and tangential deformation was analysed under different rolling methods. The variation of deformation force of the complete forming racks and the single roll during the steady state under different rolling modes was analyzed. The results show: when upbeating and down beating, radial single point average force is similar, the tangential single point average force gap is bigger, the gap of tangential single point average force is relatively large. Add itionally, the tangential force at the time of direct beating is large, and the dire ction is opposite with down beating. With directly beating, deformation force loading fast and uninstall slow. Correspondingly, with down beating, deformat ion force loading slow and uninstall fast.

  6. Research on the rolling moment in the symmetrical and asymmetrical rolling process

    Science.gov (United States)

    Alexa, V.; Raţiu, S. A.; Kiss, I.; Cioată, C. G.

    2017-01-01

    Research distribution the rolling moments symmetrical and asymmetrical report presents great importance both in theory and to introduce clarifications to the calculation of rolling resistance line assemblies. Clarifying individuals of metallic material deformation between the rolls single cylinder diameters act of any difference of work and analysis of advance and delay phenomena. Torque drive value for each of the rolling cylinders was done by reducing the thickness of the laminate samples, an experimental facility located in the laboratory of plastic deformation of the Faculty of Engineering Hunedoara. The analysis of research results show that in terms of power consumption for deformation and safety equipment in operation is rational for mills which require such a difference between the work rolls to execute about one cylinder operated.

  7. Dimensional ranges and rolling efficiency in a tandem cold rolling mill

    Energy Technology Data Exchange (ETDEWEB)

    Larkiola, J.

    1997-12-31

    In this work, physical models and a neural network theory have been combined in order to predict the properties of a steel strip and to optimise the process parameters in cold rolling. The prediction of the deformation resistance of the material and the friction parameter is based on the physical model presented by Bland, Ford and Ellis and artificial neural network computing (ANN). The accuracy of these models has been tested and proved by using a large amount of the measured data. With the aid of these models it has been shown that (a) the small change to the relative reduction distribution can have a clear effect upon the rolling efficiency, (b) the dimensional ranges of the tandem cold roll mill can be determined and optimised and (c) the possibility to cold roll a new product of new width, strength or thickness can be determined and the parameters of the tandem cold rolling process can be optimised. (orig.) 43 refs.

  8. Towards “Sustainable” Sanitation: Challenges and Opportunities in Urban Areas

    Directory of Open Access Journals (Sweden)

    Kim Andersson

    2016-12-01

    Full Text Available While sanitation is fundamental for health and wellbeing, cities of all sizes face growing challenges in providing safe, affordable and functional sanitation systems that are also sustainable. Factors such as limited political will, inadequate technical, financial and institutional capacities and failure to integrate safe sanitation systems into broader urban development have led to a persistence of unsustainable systems and missed opportunities to tackle overlapping and interacting urban challenges. This paper reviews challenges associated with providing sanitation systems in urban areas and explores ways to promote sustainable sanitation in cities. It focuses on opportunities to stimulate sustainable sanitation approaches from a resource recovery perspective, generating added value to society while protecting human and ecosystem health. We show how, if integrated within urban development, sustainable sanitation has great potential to catalyse action and contribute to multiple sustainable development goals.

  9. Testing a new alcohol-free hand sanitizer to combat infection.

    Science.gov (United States)

    Dyer, D L; Gerenraich, K B; Wadhams, P S

    1998-08-01

    Universal precautions require that perioperative health care personnel wash their hand before and after all patient contact. Time constraints, however, can make adhering to universal precautions, including proper hand washing, difficult. Some perioperative health care workers, therefore, routinely use rise-free hand sanitizers to supplement normal hand washing. This study evaluated immediate and persistent antimicrobial effectiveness of two alcohol--containing hand sanitizers and a novel surfactant, allantoin, benzalkonium chloride (SAB) hand sanitizer using a federally approved effectiveness protocol. Results indicate that all three products were equally effective after a single application. After repeated use, the alcohol-containing sanitizers did not meet federal performance standards, and the alcohol-free sanitizer did. These properties and others illustrated in this article indicate that the nonflammable, alcohol-free SAB hand sanitizer is the most favorable of the rise-free hand sanitizer formulas for normal hand washing.

  10. Magnon inflation: slow roll with steep potentials

    Energy Technology Data Exchange (ETDEWEB)

    Adshead, Peter [Department of Physics, University of Illinois at Urbana-Champaign,Urbana, IL 61801 (United States); Blas, Diego [Theoretical Physics Department, CERN,CH-1211 Geneva 23 (Switzerland); Burgess, C.P.; Hayman, Peter [Physics & Astronomy, McMaster University,Hamilton, ON, L8S 4M1 (Canada); Perimeter Institute for Theoretical Physics, Waterloo, Ontario N2L 2Y5 (Canada); Patil, Subodh P. [Department of Theoretical Physics, University of Geneva,24 Quai Ansermet, Geneva, CH-1211 (Switzerland)

    2016-11-04

    We find multi-scalar effective field theories (EFTs) that can achieve a slow inflationary roll despite having a scalar potential that does not satisfy G{sup ab}∂{sub a}V∂{sub b}V≪V{sup 2}/M{sub p}{sup 2} (where G{sub ab} is the target-space metric). They evade the usual slow-roll conditions on V because their kinetic energies are dominated by single-derivative terms rather than the usual two-derivative terms. Single derivatives dominate during slow roll and so do not require a breakdown of the usual derivative expansion that underpins calculational control in much of cosmology. The presence of such terms requires some sort of UV Lorentz-symmetry breaking during inflation (besides the usual cosmological breaking). Chromo-natural inflation provides one particular example of a UV theory that can generate the multi-field single-derivative terms we consider, and we argue that the EFT we find indeed captures the slow-roll conditions for its background evolution. We also show that our EFT can be understood as a multi-field generalization of the single-field Cuscuton models. The multi-field case introduces a new feature, however: the scalar kinetic terms define a target-space 2-form, F{sub ab}, whose antisymmetry gives new ways for slow roll to be achieved.

  11. Magnon Inflation: Slow Roll with Steep Potentials

    CERN Document Server

    Adshead, Peter; Burgess, C P; Hayman, Peter; Patil, Subodh P

    2016-01-01

    We find multi-scalar effective field theories (EFTs) that can achieve a slow inflationary roll despite having a scalar potential that does not satisfy the usual slow-roll condition (d V)^2 << V^2/Mp^2. They evade the usual slow-roll conditions on $V$ because their kinetic energies are dominated by single-derivative terms rather than the usual two-derivative terms. Single derivatives dominate during slow roll and so do not require a breakdown of the usual derivative expansion that underpins calculational control in much of cosmology. The presence of such terms requires some sort of UV Lorentz-symmetry breaking during inflation (besides the usual cosmological breaking). Chromo-natural inflation provides an example of a UV theory that can generate the multi-field single-derivative terms we consider, and we argue that the EFT we find indeed captures the slow-roll conditions for the background evolution for Chromo-natural inflation. We also show that our EFT can be understood as a multi-field generalization ...

  12. Autonomous Supervision and Control of Parametric Roll Resonance

    DEFF Research Database (Denmark)

    Galeazzi, Roberto

    therefore two objectives. The first is to develop methods for detection of the inception of parametric roll resonance. The second is to develop control strategies to stabilize the motion after parametric roll has started. Stabilisation of parametric roll resonance points to two possible courses of action...... strategies are then combined to stabilise parametric roll resonance within few roll cycles. Limitations on the maximum stabilisable roll angle are analysed and linked to the ii slew rate saturation and hydrodynamic stall characteristics of the fin stabilisers. The study on maximum stabilisable roll angle...... leads to the requirements for early detection. Two novel detectors are proposed, which work within a shorttime prediction horizon, and issue early warnings of parametric roll inception within few roll cycles from its onset. The main idea behind these detection schemes is that of exploiting the link...

  13. Effect of Leaf Surface Chemical Properties on Efficacy of Sanitizer for Rotavirus Inactivation

    Science.gov (United States)

    Fuzawa, Miyu; Ku, Kang-Mo; Palma-Salgado, Sindy Paola; Nagasaka, Kenya; Feng, Hao; Juvik, John A.; Sano, Daisuke; Shisler, Joanna L.

    2016-01-01

    ABSTRACT The use of sanitizers is essential for produce safety. However, little is known about how sanitizer efficacy varies with respect to the chemical surface properties of produce. To answer this question, the disinfection efficacies of an oxidant-based sanitizer and a new surfactant-based sanitizer for porcine rotavirus (PRV) strain OSU were examined. PRV was attached to the leaf surfaces of two kale cultivars with high epicuticular wax contents and one cultivar of endive with a low epicuticular wax content and then treated with each sanitizer. The efficacy of the oxidant-based sanitizer correlated with leaf wax content as evidenced by the 1-log10 PRV disinfection on endive surfaces (low wax content) and 3-log10 disinfection of the cultivars with higher wax contents. In contrast, the surfactant-based sanitizer showed similar PRV disinfection efficacies (up to 3 log10) that were independent of leaf wax content. A statistical difference was observed with the disinfection efficacies of the oxidant-based sanitizer for suspended and attached PRV, while the surfactant-based sanitizer showed similar PRV disinfection efficacies. Significant reductions in the entry and replication of PRV were observed after treatment with either disinfectant. Moreover, the oxidant-based-sanitizer-treated PRV showed sialic acid-specific binding to the host cells, whereas the surfactant-based sanitizer increased the nonspecific binding of PRV to the host cells. These findings suggest that the surface properties of fresh produce may affect the efficacy of virus disinfection, implying that food sanitizers should be carefully selected for the different surface characteristics of fresh produce. IMPORTANCE Food sanitizer efficacies are affected by the surface properties of vegetables. This study evaluated the disinfection efficacies of two food sanitizers, an oxidant-based sanitizer and a surfactant-based sanitizer, on porcine rotavirus strain OSU adhering to the leaf epicuticular surfaces of

  14. Computational simulations of frictional losses in pipe networks confirmed in experimental apparatusses designed by honors students

    Science.gov (United States)

    Pohlman, Nicholas A.; Hynes, Eric; Kutz, April

    2015-11-01

    Lectures in introductory fluid mechanics at NIU are a combination of students with standard enrollment and students seeking honors credit for an enriching experience. Most honors students dread the additional homework problems or an extra paper assigned by the instructor. During the past three years, honors students of my class have instead collaborated to design wet-lab experiments for their peers to predict variable volume flow rates of open reservoirs driven by gravity. Rather than learn extra, the honors students learn the Bernoulli head-loss equation earlier to design appropriate systems for an experimental wet lab. Prior designs incorporated minor loss features such as sudden contraction or multiple unions and valves. The honors students from Spring 2015 expanded the repertoire of available options by developing large scale set-ups with multiple pipe networks that could be combined together to test the flexibility of the student team's computational programs. The engagement of bridging the theory with practice was appreciated by all of the students such that multiple teams were able to predict performance within 4% accuracy. The challenges, schedules, and cost estimates of incorporating the experimental lab into an introductory fluid mechanics course will be reported.

  15. f(R) constant-roll inflation

    Energy Technology Data Exchange (ETDEWEB)

    Motohashi, Hayato [Universidad de Valencia-CSIC, Instituto de Fisica Corpuscular (IFIC), Valencia (Spain); Starobinsky, Alexei A. [L.D. Landau Institute for Theoretical Physics, RAS, Moscow (Russian Federation); National Research University Higher School of Economics, Moscow (Russian Federation)

    2017-08-15

    The previously introduced class of two-parametric phenomenological inflationary models in general relativity in which the slow-roll assumption is replaced by the more general, constant-roll condition is generalized to the case of f(R) gravity. A simple constant-roll condition is defined in the original Jordan frame, and exact expressions for a scalaron potential in the Einstein frame, for a function f(R) (in the parametric form) and for inflationary dynamics are obtained. The region of the model parameters permitted by the latest observational constraints on the scalar spectral index and the tensor-to-scalar ratio of primordial metric perturbations generated during inflation is determined. (orig.)

  16. Influence of Surge on Extreme Roll Amplitudes

    DEFF Research Database (Denmark)

    Vidic-Perunovic, Jelena; Rognebakke, Olav; Pedersen, Preben Terndrup

    2008-01-01

    Interference of the wave-induced ship surge motion with roll dynamics has been studied. The surge motion has been included in a previously derived hydrodynamic roll prediction model in order to account for the ship speed variation due to the longitudinal incident wave pressure force. Depending...... balanced in order to determine the added thrust term that would represent actions to maintain speed The resulting forward speed variation affects the frequency of encounter and the parametric roll resonant condition is directly influenced by this speed variation. The analysis procedure is demonstrated...... for an example containership sailing mainly in head sea condition and higher sea states. Sensitivity of the results to the added thrust model and vertical motion calculation is discussed....

  17. Daya Bunuh Hand Sanitizer Berbahan Aktif Alkohol 59% dalam Kemasan Setelah Penggunaan Berulang terhadap Angka Lempeng Total (ALT)

    OpenAIRE

    Isnaeni Walidah; Bambang Supriyanta; Sujono Sujono

    2014-01-01

    Kebersihan merupakan tahap awal untuk menjaga pola hidup sehat dan terhindar dari penyakit. Pencegahan penyebaran penyakit salah satunya adalah dengan mencuci tangan menggunakan antiseptik hand sanitizer.  Hand sanitizer berbahan aktif alkohol 40 – 80%  mampu menghambat pertumbuhan bakteri. Tetapi pemakaian hand  sanitizer yang tidak langsung habis akan mempengaruhi kualitas hand sanitizer Penggunaan berulang hand sanitizer akan mempengaruhi kemampuan bahan aktif dalam membunuh...

  18. Ring rolling process simulation for geometry optimization

    Science.gov (United States)

    Franchi, Rodolfo; Del Prete, Antonio; Donatiello, Iolanda; Calabrese, Maurizio

    2017-10-01

    Ring Rolling is a complex hot forming process where different rolls are involved in the production of seamless rings. Since each roll must be independently controlled, different speed laws must be set; usually, in the industrial environment, a milling curve is introduced to monitor the shape of the workpiece during the deformation in order to ensure the correct ring production. In the present paper a ring rolling process has been studied and optimized in order to obtain anular components to be used in aerospace applications. In particular, the influence of process input parameters (feed rate of the mandrel and angular speed of main roll) on geometrical features of the final ring has been evaluated. For this purpose, a three-dimensional finite element model for HRR (Hot Ring Rolling) has been implemented in SFTC DEFORM V11. The FEM model has been used to formulate a proper optimization problem. The optimization procedure has been implemented in the commercial software DS ISight in order to find the combination of process parameters which allows to minimize the percentage error of each obtained dimension with respect to its nominal value. The software allows to find the relationship between input and output parameters applying Response Surface Methodology (RSM), by using the exact values of output parameters in the control points of the design space explored through FEM simulation. Once this relationship is known, the values of the output parameters can be calculated for each combination of the input parameters. After the calculation of the response surfaces for the selected output parameters, an optimization procedure based on Genetic Algorithms has been applied. At the end, the error between each obtained dimension and its nominal value has been minimized. The constraints imposed were the maximum values of standard deviations of the dimensions obtained for the final ring.

  19. Study of rolled uranium annealing process

    International Nuclear Information System (INIS)

    Cabane, G.

    1954-06-01

    The dilatometric study of rolled uranium clearly shows not only the expansions or contractions induced by stress relief or diffusion of vacancies, but also the slope variations of the cooling curves, which are the best evidence of a texture change. Under the microscope, hard-rolled sheets appear as a mixture of two distinct structures; it is also possible by intermediate annealing to prepare homogeneous sheets of either structure, i.e. twinned or untwinned. All these sheets which have similar textures, undergo at first a primary recrystallization beginning at 320 deg C, then a texture change without any apparent crystal growth, at about 430 deg C. (author) [fr

  20. Generalized slow roll for noncanonical kinetic terms

    International Nuclear Information System (INIS)

    Hu, Wayne

    2011-01-01

    We show that the generalized slow roll approach for calculating the power spectrum where the inflationary slow roll parameters are neither small nor slowly varying can be readily extended to models with noncanonical kinetic terms in the inflaton action. For example, rapid sound speed variations can arise in Dirac-Born-Infeld models with features in the warp factor leading to features in the power spectrum. Nonetheless there remains a single source function for deviations that is simply related to the power spectrum. Empirical constraints on this source function can be readily interpreted in the context of features in the inflaton potential or sound speed.

  1. Computer-aided roll pass design in rolling of airfoil shapes

    Science.gov (United States)

    Akgerman, N.; Lahoti, G. D.; Altan, T.

    1980-01-01

    This paper describes two computer-aided design (CAD) programs developed for modeling the shape rolling process for airfoil sections. The first program, SHPROL, uses a modular upper-bound method of analysis and predicts the lateral spread, elongation, and roll torque. The second program, ROLPAS, predicts the stresses, roll separating force, the roll torque and the details of metal flow by simulating the rolling process, using the slab method of analysis. ROLPAS is an interactive program; it offers graphic display capabilities and allows the user to interact with the computer via a keyboard, CRT, and a light pen. The accuracy of the computerized models was evaluated by (a) rolling a selected airfoil shape at room temperature from 1018 steel and isothermally at high temperature from Ti-6Al-4V, and (b) comparing the experimental results with computer predictions. The comparisons indicated that the CAD systems, described here, are useful for practical engineering purposes and can be utilized in roll pass design and analysis for airfoil and similar shapes.

  2. Inflation with a smooth constant-roll to constant-roll era transition

    Science.gov (United States)

    Odintsov, S. D.; Oikonomou, V. K.

    2017-07-01

    In this paper, we study canonical scalar field models, with a varying second slow-roll parameter, that allow transitions between constant-roll eras. In the models with two constant-roll eras, it is possible to avoid fine-tunings in the initial conditions of the scalar field. We mainly focus on the stability of the resulting solutions, and we also investigate if these solutions are attractors of the cosmological system. We shall calculate the resulting scalar potential and, by using a numerical approach, we examine the stability and attractor properties of the solutions. As we show, the first constant-roll era is dynamically unstable towards linear perturbations, and the cosmological system is driven by the attractor solution to the final constant-roll era. As we demonstrate, it is possible to have a nearly scale-invariant power spectrum of primordial curvature perturbations in some cases; however, this is strongly model dependent and depends on the rate of the final constant-roll era. Finally, we present, in brief, the essential features of a model that allows oscillations between constant-roll eras.

  3. The Role of Perceived Social Norms in Rural Sanitation: An Explorative Study from Infrastructure-Restricted Settings of South Ethiopia.

    Science.gov (United States)

    Novotný, Josef; Kolomazníková, Jana; Humňalová, Helena

    2017-07-17

    The perception of social sanitation norms (PSSNs) around unacceptability of open defecation has been a key aspect of recent sanitation interventions. However, underlying mechanisms through which "reconstructed" PSSNs affect sanitation outcomes have been a black box. This explorative cross-sectional study examines direct and indirect links between PSSNs and sanitation safety using data from structured interviews and observations in 368 households in rural South Ethiopia. In addition to a positive association between PSSNs and sanitation safety, we propose and examine the following two mechanisms: First, we confirm a potentially adverse feedback of PSSNs on future sanitation safety by enhancing the emotional satisfaction with current sanitation practice (satisfaction independent of the functionality of sanitation facilities). Second, inspired by the social amplification/attenuation of risk framework, we demonstrate that PSSNs work as a "social filter" that can amplify or attenuate the effects of other variables targeted in sanitation interventions such as perceived health-related and non-health risks and benefits associated with open defecation and private latrine ownership, respectively, and factual hygiene and sanitation knowledge. These findings imply that PSSNs are not only important per se, but they are also important instrumentally because sanitation outcomes depend upon the capacity of social influences to shape the perception of sanitation risks and benefits and sanitation-related awareness in desirable ways. The mechanisms outlined in this paper as well as the sustainability of sanitation outcomes depend on whether and how social sanitation norms are internalized.

  4. Attitudes of Turkish Academics Regarding Violence Against Women in the Name of Honor.

    Science.gov (United States)

    Yeşilçiçek Çalik, Kıymet

    2017-11-01

    Honor is an important concept that has a vital value in Turkey and affects many women's lives and even causes death. It is of utmost importance to know and scientifically demonstrate the value judgments of the academics that lead and pioneer the society in our country where honor culture is adopted. Therefore, in Turkey, where thousands of women are exposed to violence every year, 877 academics participated in this descriptive study to determine the attitudes of academics toward violence against women in the name of honor. The data were collected using "The Scale for Attitudes Towards Violence Against Women in the Name of Honor (SAVWNH)" in the form of electronic questionnaires through email addresses of the academics working at different faculties of the university in the official website of the university in September 1 to October 1, 2015. In our study, academics' "attitudes towards violence against women in the name of honor" were found low. That is, academics had negative attitudes toward the verbal or physical violence against women in the name of honor and opposed to the punishment of women for this reason. Nevertheless, the attitudes of those who were males; those who were not professors, associate professors, and assistant professors; those who were single; those who had lived in the district/village for a long time; those who had arranged marriages; those who used any kind of violence; and those who considered violence as a solution were found somewhat more conventional. These results showed that, for some academics, the traditional beliefs of the Turkish patriarchal society continued to be valid although they were included in university academic cultures. In fact, it is revealed here that social values, traditions, and customs are very effective and important on the formation of personality in socialization process.

  5. Why do households invest in sanitation in rural Benin: Health, wealth, or prestige?

    Science.gov (United States)

    Gross, Elena; Günther, Isabel

    2014-10-01

    Seventy percent of the rural population in sub-Saharan Africa does not use adequate sanitation facilities. In rural Benin, as much as 95% of the population does not use improved sanitation. By analyzing a representative sample of 2000 rural households, this paper explores why households remain without latrines. Our results show that wealth and latrine prices play the most decisive role for sanitation demand and ownership. At current income levels, sanitation coverage will only increase to 50% if costs for construction are reduced from currently 190 USD to 50 USD per latrine. Our analysis also suggests that previous sanitation campaigns, which were based on prestige and the allure of a modern lifestyle as motives for latrine construction, have had no success in increasing sanitation coverage. Moreover, improved public health, which is the objective of public policies promoting sanitation, will not be effective at low sanitation coverage rates. Fear at night, especially of animals, and personal harassment, are stated as the most important motivational factors for latrine ownership and the intention to build one. We therefore suggest changing the message of sanitation projects and introduce new low-cost technologies into rural markets; otherwise, marketing strategies will continue to fail in increasing sanitation demand.

  6. Calculation and experimental technique of determination of rolling procedure for cold-rolling tube mills

    International Nuclear Information System (INIS)

    Igoshin, V.F.; Aleshin, V.A.; Khoroshikh, Yu.G.; Bogatov, A.A.; Mizhiritskij, O.I.

    1983-01-01

    Calculation and experimental technique of determination of tube cold rolling procedure has been developed. Rolling procedure based on the usage of regression equation epsilon=1.24 psi, where psi is the relative reduction of area, delta-permissible reduction during rolling, has been tested on 08Kh18N10T steel. The effect of tube geometry, tool calibration parameters, lubrication conditions etc. on metal deformability in taking into account experimentally. The use of the technique proposed has allowed to shorten the time of mastering of the production of tubes from different steels

  7. Improving Sanitation Project Management for Unsewered Rural Communities in Morocco

    Directory of Open Access Journals (Sweden)

    M MAHI

    2015-06-01

    Full Text Available The hydraulic potential in Morocco is limited, droughts are more frequent, resulting of climate change, and increasing water demand relating to the population growth and socio-economic development. Morocco has invested in the urban sanitation sector through the establishment of the National Liquid Sanitation Program. In rural Area, the intervention in this sector remains limited due to various constraints. In order to support the efforts of establishment of the National Rural Assainissment Program (PNAR, we conducted a case study that recommended the treatment of wastewater by an innovative process used for the first time in Morocco. We realized, first, a pilot experiment at the douar (Unstructured Village Talat Marghen within the rural Municipality of Aghouatim a few km from Marrakech. The innovative aspect of the project is managerial proposes covering the different technical aspects, management and institutional innovation, to meet the various constraints that characterize the rural areas.

  8. Child rights, right to water and sanitation, and human security.

    Science.gov (United States)

    Pink, Ross

    2012-06-15

    The article explores the intersection between child rights, water scarcity, sanitation, and the human security paradigm. The recognition of child rights has been advanced through the 1989 Convention on the Rights of the Child and other international legal instruments, while water rights are increasingly affirmed in international law and through the historic July 2010 United Nations General Assembly resolution that strengthened the legal foundation for water security and human rights. Yet there remains a development gap in terms of child access to clean and secure water sources for basic human development needs. The human security paradigm provides a legal and humanitarian foundation for the extension of child rights related to water and sanitation. Copyright © 2012 Pink.

  9. Use of Propolis in the Sanitization of Lettuce

    Directory of Open Access Journals (Sweden)

    Xesús Feás

    2014-07-01

    Full Text Available The present study aimed to determine the effectiveness of propolis in reducing the microbial load in ready-to-eat (RTE and fresh whole head (FWH lettuces (Lactuca sativa L. type Batavia. Two sanitizing solutions were employed: sodium hypochlorite (SH and propolis (PS, during 15 and 30 min. Tap water (TW was used as a control. Regarding the mean reduction on aerobic mesophiles, psychrotrophic and fecal coliforms, the SH and PS treatments showed the same pattern of variation. In all cases, PS was slightly more effective in the microbiological reduction in comparison with commercial SH. Reductions between two and three log cycles were obtained with PS on aerobic mesophiles and psychrotrophic counts. The information obtained in the present study can be used to evaluate the potential use of propolis as product for sanitizing other vegetables and for developing other food preservation technologies, with impact on human health.

  10. Water, Sanitation and Hygiene Situation in Kenya's Urban Slums.

    Science.gov (United States)

    Kamau, Njoroge; Njiru, Haron

    2018-01-01

    Kenya has undergone rapid urbanization as people migrate to the cities in search of economic opportunities. This has given rise to informal settlements characterized by overcrowding, poor infrastructure, and inadequate social amenities. A cross-sectional study on water, sanitation, and hygiene (WASH) status was carried out in Mathare, an informal settlement in Nairobi. A random sample of 380 households was used. The average household size was five people, and 26% of the household heads had completed secondary or higher level of education. The main source of income (70%) was self-employment with 41% of the households living on less than 1.5 USD per day. The WASH situation in the urban slums is below the minimum standard recommended by the World Health Organization (WHO). There is need to improve the situation by improving and installing basic infrastructure including water, sanitation, and solid waste collection.

  11. Incentivizing Decentralized Sanitation: The Role of Discount Rates.

    Science.gov (United States)

    Wood, Alison; Blackhurst, Michael; Garland, Jay L; Lawler, Desmond F

    2016-06-21

    In adoption decisions for decentralized sanitation technologies, two decision makers are involved: the public utility and the individual homeowner. Standard life cycle cost is calculated from the perspective of the utility, which uses a market-based discount rate in these calculations. However, both decision-makers must be considered, including their differing perceptions of the time trade-offs inherent in a stream of costs and benefits. This study uses the discount rate as a proxy for these perceptions and decision-maker preferences. The results in two case studies emphasize the dependence on location of such analyses. Falmouth, Massachusetts, appears to be a good candidate for incentivizing decentralized sanitation while the Allegheny County Sanitary Authority service area in Pennsylvania appears to have no need for similar incentives. This method can be applied to any two-party decision in which the parties are expected to have different discount rates.

  12. Medal of Honor Award Process Review: U.S. Army Noncommissioned Officer Nominee (Redacted)

    Science.gov (United States)

    2016-05-04

    award the nominee the Silver Star. We determined Secretary McHugh acted within his authority when he decided to award the SS. We found no evidence...why the Honorable John M. McHugh , Secretary of the Army, downgraded the nominee’s MOH award recommendation to the Silver Star (SS).1 In a memorandum...valorous actions as documented in the MOH award 1 The Honorable John M. McHugh left his position as Secretary of the Army on November 1, 2015. 2 We did

  13. The Quest for Honor and Citizenship in Post-Slavery Borgu (Benin)

    DEFF Research Database (Denmark)

    Hahonou, Eric Komlavi

    2015-01-01

    that is increasingly being contested in a number of forms. The paper explores the heritage of slavery in its cultural, spatial, social, economic, and political dimensions. The author sheds light on the concept of honor that is a central dimension of social and political life in West Africa. In nowadays Benin, Gando...... peasants take pride in nourrishing a number of noble families and put at stake their honor in ostentatious competition. By doing so, they not only question the central idea that slaves are honorless but enact new conceptions and new practices of citizenship....

  14. Honor killings in the Middle East and North Africa: a systematic review of the literature.

    Science.gov (United States)

    Kulczycki, Andrzej; Windle, Sarah

    2011-11-01

    A systematic review of the research literature on honor killings in the Middle East and North Africa (MENA) indicates a paucity of studies relative to the presumed magnitude of the problem. Forty articles were reviewed and critically appraised, of which only 9 contained primary data and 11 presented original secondary analyses. Despite a recent increase in published studies, persistent methodological limitations restrict the generalizability of findings. Most studies focus on legal aspects, determinants, and characteristics of victims and perpetrators. Victims are mostly young females murdered by their male kin. Unambiguous evidence of a decline in tolerance of honor killings remains elusive.

  15. Quantitative studies of water and sanitation utilities: a literature survey

    OpenAIRE

    Berg, Sanford V; Marques, Rui Cunha

    2010-01-01

    This paper performs a literature update of quantitative studies of water and sanitation services (WSS). There are 190 studies which use cost or production functions to evaluate the performance of WSS utilities. The studies examine (1) the scale, scope or density economies of utilities in a particular country or region, (2) the influence of ownership on efficiency, (3) the existence and power of incentives associated with different governance systems (including external regulation), and (4) pe...

  16. Egypt : Operational Framework for Integrated Rural Sanitation Service Delivery

    OpenAIRE

    World Bank

    2005-01-01

    The Framework presented in this report links - for the first time in the Egyptian context - access to investment in rural sanitation services to quantifiable water quality (and health) improvements, in a given hydrologic basin. The Framework provides an integrated, institutional structure of relevant Government agencies and of serviced communities, which is built on integrated water resources management (IWRM) principles: treating water as a holistic resource, management at the lowest appropr...

  17. 32 CFR 887.7 - Persons separated under other than honorable conditions (undesirable or bad conduct) or...

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Persons separated under other than honorable conditions (undesirable or bad conduct) or dishonorable discharge. 887.7 Section 887.7 National Defense... honorable conditions (undesirable or bad conduct) or dishonorable discharge. Those persons whose character...

  18. Use of sanitizing products: safety practices and risk situations

    Directory of Open Access Journals (Sweden)

    Ana Aurélia Rocha da Silva

    2014-04-01

    Full Text Available OBJECTIVES: to evaluate the handling and risk factors for poisoning and/or digestive tract injuries associated with the use of sanitizing products at home. METHODS: interviews were conducted in 419 households from different regions, collecting epidemiological data from residents and risk habits related to the use and storage of cleaning products. RESULTS: sanitizing products considered to be a health risk were found in 98% of the households where the research was conducted, and in 54% of cases, they were stored in places easily accessible to children. Lye was found in 19%, followed by illicit products in 39% of homes. In 13% of households, people produced soap, and in 12% they stored products in non-original containers. The use of illicit products and the manufacture of handmade soap were associated with lower educational level of the household owners and with the regions and socioeconomic classes with lower purchasing power. CONCLUSIONS: risk practices such as inadequate storage, manufacturing, and use of sanitizing products by the population evidence the need for public health policies, including educational measures, as a means of preventing accidents.

  19. Sanitation of conditioned radioactive waste after a contamination accident

    International Nuclear Information System (INIS)

    Aeppli, J.

    1980-01-01

    In June 1978, there occurred in the port of Ijmuiden, Netherlands, a contamination incident involving drums originating from Switzerkand and containing radioactive wastes intended to be dumped into the sea. The batch of 207 drums excluded from the sea-dumping action had to be sanitated for the next year dumping in such a manner, that these wastes met the international requirements and could be disposed of by sinking them into the Atlantic. As a consequence of extensive sanitation work, requiring part of the wastes to be newly conditioned and several drums to be packaged again, the total weight of the wastes ready for dumping was doubled. The total radiation exposure for the personnel that took part in the individual phases of sanitation amounted to about 10 man-rem. The main causes for this contamination incident were unusual chemical composition of the concentrate to be solidified, unsufficient quality control and a position not suitabble for transport. The measures taken after this incident intend to avoid similar occurrences in the future. (orig.) [de

  20. Measurement of Normal and Friction Forces in a Rolling Process

    DEFF Research Database (Denmark)

    Henningsen, Poul; Arentoft, Mogens; Wanheim, Tarras

    2004-01-01

    by the fric-tion conditions. To achieve this important informa-tion, measurements of the normal pressure and friction stresses in the deformation zone are re-quested. The direction of the friction stresses is changing during the rolling gap. At the entrance of the de-formation zone, the peripherical velocity...... of the roll is higher than for the incoming material, which causes frictional stresses at the material acting in the rolling direction. At the outlet of the rolling gap, the velocity of the deformed material exceeds the velocity of the roll, generating frictional stresses contrary to the direction of rolling....... In a narrow area in the deformation zone, the velocity of the de-formed material is equal to the velocity of the rolls. This area or line is named “neutral line”. The posi-tion of the neutral line depends on friction, reduc-tion ratio, diameter of the rolls, and width of the sheet....

  1. NON-CENTRAL ROLLING OF FLAT WORKS WITH TAPERED THICKNESS

    Directory of Open Access Journals (Sweden)

    I. A. Isaevich

    2010-01-01

    Full Text Available The way of forming of variable shape strips with rolling in non-drive waves with rounding by the movable arbor strip is analyzed. The way of rolling with derivation of speeds of deforming instruments is offered.

  2. Rolling Friction on a Wheeled Laboratory Cart

    Science.gov (United States)

    Mungan, Carl E.

    2012-01-01

    A simple model is developed that predicts the coefficient of rolling friction for an undriven laboratory cart on a track that is approximately independent of the mass loaded onto the cart and of the angle of inclination of the track. The model includes both deformation of the wheels/track and frictional torque at the axles/bearings. The concept of…

  3. 9 CFR 381.159 - Poultry rolls.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Poultry rolls. 381.159 Section 381.159... ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Definitions and Standards of Identity or Composition § 381...

  4. The riddles of rock and roll

    NARCIS (Netherlands)

    L.J.M. d' Anjou (Leo)

    2003-01-01

    textabstractRock and roll has often been equated with rebellion. The genre, though, is just a form of popular music and many of the important players in the game of promoting it were, like the saying goes, only in it for the money. As a rule, music like that will be supportive of the social order

  5. Statistical prediction of parametric roll using FORM

    DEFF Research Database (Denmark)

    Jensen, Jørgen Juncher; Choi, Ju-hyuck; Nielsen, Ulrik Dam

    2017-01-01

    Previous research has shown that the First Order Reliability Method (FORM) can be an efficient method for estimation of outcrossing rates and extreme value statistics for stationary stochastic processes. This is so also for bifurcation type of processes like parametric roll of ships. The present...

  6. Crowdsourcing rock n' roll multimedia retrieval

    NARCIS (Netherlands)

    Snoek, Cees G.M.; Freiburg, Bauke; Oomen, Johan; Ordelman, Roeland J.F.

    2010-01-01

    In this technical demonstration, we showcase a multimedia search engine that facilitates semantic access to archival rock n' roll concert video. The key novelty is the crowdsourcing mechanism, which relies on online users to improve, extend, and share, automatically detected results in video

  7. Detection of Parametric Roll on Ships

    DEFF Research Database (Denmark)

    Galeazzi, Roberto; Blanke, Mogens; Poulsen, Niels Kjølstad

    2012-01-01

    phenomenon could make the navigator change ship’s speed and heading, and these remedial actions could make the vessel escape the bifurcation. This chapter proposes non-parametric methods to detect the onset of parametric roll resonance. Theoretical conditions for parametric resonance are re...... on experimental data from towing tank tests and data from a container ship passing an Atlantic storm....

  8. Chladniite: A New Mineral Honoring the Father of Meteoritics

    Science.gov (United States)

    McCoy, T. J.; Steele, I. M.; Keil, K.; Leonard, B. F.; Endress, M.

    1993-07-01

    cell. A total of 17 lines were observed in the powder pattern. Chladniite is hexagonal, R 3(bar), a = 14.967 angstroms, c = 42.595 angstroms, beta = 120 degrees. Attempts to determine the structure of chladniite are in progress. Chladniite is named for Ernst Florens Friedrich Chladni (1756-1827), who is widely regarded as the "Father of Meteoritics." After his initial training as a lawyer, Chladni turned his attention to science, particularly problems in acoustics. He was not, however, able to obtain a permanent position and embarked upon the life of a nomad, traveling among the great cities of Europe lecturing about acoustics. During these travels, he eventually gained an interest in meteoritics. It was Chladni's pioneering book of 1794 that, for the first time, presented strong evidence for an extraterrestrial origin of meteoritic stones and irons [5]. In addition, Chladni argued that meteorites must have been the building blocks of all planets and argued that a large iron core must exist inside the Earth. During his extensive travels, Chladni also established a meteorite collection that can still be seen at Humboldt University in Berlin. It is appropriate that a mineral be named in his honor as we approach the 200th anniversary of the publication of his monumental work. References: [1] McCoy et al. (1993) Meteoritics, in press. [2] Fuchs et al. (1967) GCA, 21, 1711-1719. [3] Araki and Moore (1981) Am. Mineral., 66, 827-842. [4] Livingstone (1980) Min. Mag., 43, 833-836. [5] Chladni (1794) Riga, J. F. Hartknoch (in German); reprinted (with introduction by G. Hoppe) by Akad. Verlagsgesellschaft Geest & Portig K.-G. (1982) (in German).

  9. Lengthening the lifetime of roll-to-roll produced polymer solar cells

    DEFF Research Database (Denmark)

    Madsen, Morten Vesterager

    the knowledge of the degradation mechanisms involved in roll-to-roll coated polymer solar cells. While only a part of the experiments have directly involved roll-to-roll coated devices, most of the work is applicable to coated devices. The first part of the dissertation is devoted to the study of in......The field of polymer solar cells is a field with an exponential growth in the number of published papers. It is a field defined by a set of challenges including; efficiency, stability and processability. Before all of these challenges have been addressed; polymer solar cells...... will not be a commercial success. This dissertation is devoted primarily to the study of the stability of polymer solar cells, and more specifically to designing and verifying experimental techniques, procedures, and automated solutions to stability tests and characterization. The goal of the project was to expand...

  10. Effect of Rolling Resistance in Dem Models With Spherical Bodies

    Directory of Open Access Journals (Sweden)

    Dubina Radek

    2016-12-01

    Full Text Available The rolling resistance is an artificial moment arising on the contact of two discrete elements which mimics resistance of two grains of complex shape in contact rolling relatively to each other. The paper investigates the influence of rolling resistance on behaviour of an assembly of spherical discrete elements. Besides the resistance to rolling, the contacts between spherical particles obey the Hertzian law in normal straining and Coulomb model of friction in shear.

  11. Roll-to-Roll fabrication of large area functional organic materials

    DEFF Research Database (Denmark)

    Søndergaard, Roar R.; Hösel, Markus; Krebs, Frederik C

    2013-01-01

    With the prospect of extremely fast manufacture of very low cost devices, organic electronics prepared by thin film processing techniques that are compatible with roll-to-roll (R2R) methods are presently receiving an increasing interest. Several technologies using organic thin films...... research fields such as organic photovoltaics, organic thin film transistors, light-emitting diodes, polymer electrolyte membrane fuel cells, and electrochromic devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 000: 000–000, 2012...

  12. Using Light-Induced Thermocleavage in a Roll-to-Roll Process for Polymer Solar Cells

    DEFF Research Database (Denmark)

    Krebs, Frederik C; Norrman, Kion

    2010-01-01

    We report on the use of intense visible light with a narrow spectral distribution matched to the region where the conjugated polymer material absorbs to selectively heat the active material and induce thermocleavage. We show a full roll-to-roll process, leading to complete large-area polymer solar...... ion mass spectrometry, attenuated total reflectance infrared, and transmission/reflection UV−vis techniques....

  13. Roll-to-roll coated PBI membranes for high temperature PEM fuel cells

    DEFF Research Database (Denmark)

    Steenberg, Thomas; Hjuler, Hans Aage; Terkelsen, Carina

    2012-01-01

    We employed roll-to-roll coating in the preparation of 40 μm thick poly[2,2′(m-phenylene)-5,5′bibenzimidazole] (PBI) films for fuel cells using both knife-coating (KC) and slot-die (SD) coating. The films were coated directly from a 9% (w/w) solution of PBI in dimethylacetamide onto a sacrificial...

  14. Assessment of friction between a rolling cylindrical element and a ...

    African Journals Online (AJOL)

    A cost-effective friction coefficient measuring technique was developed and tested. The technique involved the mounting of two sensing elements on the surface of rolls, in a manner that sought to measure simultaneously the normal and the tangential stresses during rolling. The instrumented roll termed “SGRoll” was ...

  15. 21 CFR 136.130 - Milk bread, rolls, and buns.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Milk bread, rolls, and buns. 136.130 Section 136.130 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED....130 Milk bread, rolls, and buns. (a) Each of the foods milk bread, milk rolls, and milk buns conforms...

  16. Lubrication in cold rolling : Numerical simulation using multigrid techniques

    NARCIS (Netherlands)

    Lugt, Pieter Martin

    1992-01-01

    In the cold rolling process a lubricant is applied on the rolls and/or the strip mate­rial. Due to the velocities of the rolls and the strip, part of the lubricant is sheared into the contact causing, amongst others, a reduction of the friction. In this thesis a physical-mathematical model is

  17. Metallurgical analysis of spalled work roll of hot strip mill

    International Nuclear Information System (INIS)

    Khan, M.M.; Khan, M.A.

    1993-01-01

    In this study failure analysis of four work roll of the Hot Strip Mill is carried out. The microstructure is correlated with the chemical composition of shell and roll-life. It was concluded that for the longer service of the roll, cementite, graphite and martensite should be balanced (as per working requirement of the mill). (author)

  18. Roll compaction and granulation system for nuclear fuel material

    International Nuclear Information System (INIS)

    Goldmann, L.H. Jr.; Holley, C.C.

    1981-01-01

    A roll compaction and roll granulation system has been designed and fabricated to replace conventional preslugging and crushing operations typically used in the fabrication of mixed oxide nuclear fuel pellets. This equipment will be of maintenance advantage with only the compaction and granulation rolls inside containment. The prototype is being tested and the results will be reported within a year

  19. Chaotic travelling rolls in Rayleigh–Bénard convection

    Indian Academy of Sciences (India)

    The lateral shift of the rolls may lead to a global flow reversal of the convective motion. The chaotic travelling rolls are observed in simulations with free-slip as well as no-slip boundary conditions on the velocity field. We show that the travelling rolls and the flow reversal are due to an interplay between the real and imaginary ...

  20. 14 CFR 27.493 - Braked roll conditions.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Braked roll conditions. 27.493 Section 27... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Strength Requirements Ground Loads § 27.493 Braked roll conditions. Under braked roll conditions with the shock absorbers in their static positions— (a) The limit...

  1. 14 CFR 23.493 - Braked roll conditions.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Braked roll conditions. 23.493 Section 23.493 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT....493 Braked roll conditions. Under braked roll conditions, with the shock absorbers and tires in their...

  2. 14 CFR 29.493 - Braked roll conditions.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Braked roll conditions. 29.493 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Strength Requirements Ground Loads § 29.493 Braked roll conditions. Under braked roll conditions with the shock absorbers in their static positions— (a) The limit...

  3. Rolling Force Prediction in Heavy Plate Rolling Based on Uniform Differential Neural Network

    Directory of Open Access Journals (Sweden)

    Fei Zhang

    2016-01-01

    Full Text Available Accurate prediction of the rolling force is critical to assuring the quality of the final product in steel manufacturing. Exit thickness of plate for each pass is calculated from roll gap, mill spring, and predicted roll force. Ideal pass scheduling is dependent on a precise prediction of the roll force in each pass. This paper will introduce a concept that allows obtaining the material model parameters directly from the rolling process on an industrial scale by the uniform differential neural network. On the basis of the characteristics that the uniform distribution can fully characterize the solution space and enhance the diversity of the population, uniformity research on differential evolution operator is made to get improved crossover with uniform distribution. When its original function is transferred with a transfer function, the uniform differential evolution algorithms can quickly solve complex optimization problems. Neural network structure and weights threshold are optimized by uniform differential evolution algorithm, and a uniform differential neural network is formed to improve rolling force prediction accuracy in process control system.

  4. Roll-to-Roll Nanoforming of Metals Using Laser-Induced Superplasticity.

    Science.gov (United States)

    Goswami, Debkalpa; Munera, Juan C; Pal, Aniket; Sadri, Behnam; Scarpetti, Caio Lui P G; Martinez, Ramses V

    2018-05-24

    This Letter describes a low-cost, scalable nanomanufacturing process that enables the continuous forming of thin metallic layers with nanoscale accuracy using roll-to-roll, laser-induced superplasticity (R2RLIS). R2RLIS uses a laser shock to induce the ultrahigh-strain-rate deformation of metallic films at room temperature into low-cost polymeric nanomolds, independently of the original grain size of the metal. This simple and inexpensive nanoforming method does not require access to cleanrooms and associated facilities, and can be easily implemented on conventional CO 2 lasers, enabling laser systems commonly used for rapid prototyping or industrial cutting and engraving to fabricate uniform and three-dimensional crystalline metallic nanostructures over large areas. Tuning the laser power during the R2RLIS process enables the control of the aspect ratio and the mechanical and optical properties of the fabricated nanostructures. This roll-to-roll technique successfully fabricates mechanically strengthened gold plasmonic nanostructures with aspect ratios as high as 5 that exhibit high oxidation resistance and strong optical field enhancements. The CO 2 laser used in R2RLIS can also integrate the fabricated nanostructures on transparent flexible substrates with robust interfacial contact. The ability to fabricate ultrasmooth metallic nanostructures using roll-to-roll manufacturing enables the large scale production, at a relatively low-cost, of flexible plasmonic devices toward emerging applications.

  5. The effect of consumer expectations and perceptions regarding sanitation on access to clean water

    CSIR Research Space (South Africa)

    Duncker, Louiza

    2017-08-01

    Full Text Available and Sanitation Centre. Drangert, Jan-Olof, Louiza Christina Duncker, Gertrude Matsebe, and Victoria Abu Atukunda. 2006. “Ecological Sanitation, Urban Agriculture and Gender in Peri- Journal of Ethical Urban Living 34 urban Settlements: A Comparative Study... the author worked on. Publication Details Journal of Ethical Urban Living (ISSN: 2470-2641). August, 2017. Volume 1, Issue 1. Citation Duncker, Louiza. 2017. “The Effect of Consumer Expectations and Perceptions Regarding Sanitation on Access to Clean Water...

  6. User perceptions of shared sanitation among rural households in Indonesia and Bangladesh.

    Science.gov (United States)

    Nelson, Kali B; Karver, Jonathan; Kullman, Craig; Graham, Jay P

    2014-01-01

    The practice of sharing sanitation facilities does not meet the current World Health Organization/UNICEF definition for what is considered improved sanitation. Recommendations have been made to categorize shared sanitation as improved sanitation if security, user access, and other conditions can be assured, yet limited data exist on user preferences with respect to shared facilities. This study analyzed user perceptions of shared sanitation facilities in rural households in East Java, Indonesia, and Bangladesh. Cross-sectional studies of 2,087 households in East Java and 3,000 households in Bangladesh were conducted using questionnaires and observational methods. Relative risks were calculated to analyze associations between sanitation access and user perceptions of satisfaction, cleanliness, and safety. In East Java, 82.4% of households with private improved sanitation facilities reported feeling satisfied with their place of defecation compared to 68.3% of households with shared improved facilities [RR 1.19, 95% CI 1.09, 1.31]. In Bangladesh, 87.7% of households with private improved facilities reported feeling satisfied compared to 74.5% of households with shared improved facilities [RR 1.15, 95% CI 1.10, 1.20]. In East Java, 79.5% of households who reported a clean latrine also reported feeling satisfied with their place of defecation; only 38.9% of households who reported a dirty latrine also reported feeling satisfied [RR 1.74, 95% CI 1.45, 2.08]. Simple distinctions between improved and unimproved sanitation facilities tend to misrepresent the variability observed among households sharing sanitation facilities. Our results suggest that private improved sanitation is consistently preferred over any other sanitation option. An increased number of users appeared to negatively affect toilet cleanliness, and lower levels of cleanliness were associated with lower levels of satisfaction. However, when sanitation facilities were clean and shared by a limited number

  7. Effect of hand sanitizer on the performance of fingermark detection techniques.

    Science.gov (United States)

    Chadwick, Scott; Neskoski, Melissa; Spindler, Xanthe; Lennard, Chris; Roux, Claude

    2017-04-01

    Hand sanitizers have seen a rapid increase in popularity amongst the general population and this increased use has led to the belief that hand sanitizers may have an effect on subsequent fingermark detection. Based on this hypothesis, three alcoholic and two non-alcoholic hand sanitizers were evaluated to determine the effect they had on the detection of fingermarks deposited after their use. The following fingermark detection methods were applied: 1,2-indanedione-zinc, ninhydrin, physical developer (porous substrate); and cyanoacrylate, rhodamine 6G, magnetic powder (non-porous substrate). Comparison between hand sanitized fingermarks and non-hand sanitized fingermarks showed that the alcohol-based hand sanitizers did not result in any visible differences in fingermark quality. The non-alcoholic hand sanitizers, however, improved the quality of fingermarks developed with 1,2-indanedione-zinc and ninhydrin, and marginally improved those developed with magnetic powder. Different parameters, including time since hand sanitizer application prior to fingermark deposition and age of deposited mark, were tested to determine the longevity of increased development quality. The non-alcoholic hand sanitized marks showed no decrease in quality when aged for up to two weeks. The time since sanitizer application was determined to be an important factor that affected the quality of non-alcoholic hand sanitized fingermarks. It was hypothesized that the active ingredient in non-alcoholic hand sanitizers, benzalkonium chloride, is responsible for the increase in fingermark development quality observed with amino acid reagents, while the increased moisture content present on the ridges resulted in better powdered fingermarks. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Kemampuan Daya Hambat Bahan Aktif Beberapa Merek Dagang Hand sanitizer terhadap Pertumbuhan Staphylococcus aureus

    OpenAIRE

    Putri Srikartika; Netti Suharti; Eliza Anas

    2016-01-01

    AbstrakHand sanitizer sebagai pembersih tangan antiseptik inovatif saat ini, sering menjadi alternatif pengganti cuci tangan dengan sabun dan air. Mencuci tangan dengan hand sanitizer merupakan salah satu cara memelihara kebersihan tangan agar terhindar dari penyakit  yang disebabkan oleh flora normal di kulit yang berpotensi patogenik seperti bakteri Staphylococcus aureus. Tujuan penelitian ini adalah menilai kemampuan daya hambat beberapa merek dagang hand sanitizer terhadap pertumbuhan Sta...

  9. Comparative assessment of antimicrobial efficacy of different hand sanitizers: An in vitro study

    OpenAIRE

    Jain, Vardhaman Mulchand; Karibasappa, Gundabaktha Nagappa; Dodamani, Arun Suresh; Prashanth, Vishwakarma K.; Mali, Gaurao Vasant

    2016-01-01

    Background: To evaluate the antimicrobial efficacy of four different hand sanitizers against Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, Escherichia coli, and Enterococcus faecalis as well as to assess and compare the antimicrobial effectiveness among four different hand sanitizers. Materials and Methods: The present study is an in vitro study to evaluate antimicrobial efficacy of Dettol, Lifebuoy, PureHands, and Sterillium hand sanitizers against clinical i...

  10. A conceptual model of people's approach to sanitation

    Energy Technology Data Exchange (ETDEWEB)

    Avvannavar, Santosh M. [Center for Sustainable Technologies, Indian Institute of Science, Bangalore-560012, Karnataka (India)], E-mail: santosh@astra.iisc.ernet; Mani, Monto [Center for Sustainable Technologies, Indian Institute of Science, Bangalore-560012, Karnataka (India)

    2008-02-01

    Sanitation is a term primarily used to characterize the safe and sound handling (and disposal) of human excreta - or simply, people's approach to take-care of their (unavoidable) primal urge. According to the recent Human Development Report 2006 Global access to proper sanitation stands at approximately 58% with 37% being a conservative estimate both for South Asia and Sub-Saharan Africa. Various multi-million dollar sanitation programmes the world over have had little success, often due to inadequate understanding of people's sanitation approach. Sanitation approach includes the perception, feel and practices involved in satisficing the primal need to defecate and urinate (and their disposal). This paper presents a structure to understand the nature of psycho-socio-economic influences that determine societal approach to sanitation. Societies across the globe have evolved imbibing diverse influences attributed to the local environment, religion, cultural practices, war, etc. While a civilization's living environment reflects these influences in their built-environment characteristics, the influences are often deep-rooted and can be traced to the way the community members satisfice their need to defecate and urinate (sanitation approach). The objective of this paper is to trace the various approaches that diverse societies/civilizations, over time, across the world have had towards sanitation, and present a structure to articulate and understand determining factors. Sanitation also involves other domestic (solid and liquid) waste disposal but in the context of this paper the scope of sanitation has been restricted to human excreta alone. The structure presented and discussed in this paper would be useful in understanding a community better in terms of providing appropriate sanitation. It is hoped that this structure be considered as a basis for further refinement and detailed research into each of the factors determining people's sanitation

  11. Moving up the sanitation ladder with the help of microfinance in urban Malawi

    OpenAIRE

    Chunga, R; Jenkins, MW; Ensink, J; Brown, J

    2017-01-01

    We carried out a stated preference survey in Malawi to examine whether access to microfinance for sanitation would significantly increase the proportion of households upgrading to improved pit latrines or alternative improved sanitation technologies (urine diverting dry toilet, fossa alterna, pour flush). We presented a range of sanitation options at local market prices, initially without and then with a real microfinance option, to 1,300 households sampled across 27 low-income urban settleme...

  12. Pembangunan Aplikasi Perhitungan Honor dan Pengukuran Kinerja Asisten Praktikum Berbasis SaaS

    Directory of Open Access Journals (Sweden)

    Fitri Susanti

    2015-11-01

    Full Text Available Bagi suatu perguruan tinggi, kegiatan praktikum sangat penting untuk mendukung pembelajaran di kelas. Beberapa masalah yang muncul dalam pengelolaan kegiatan praktikum seperti keterlambatan pengumpulan berita acara praktikum (BAP sehingga memperlambat perhitungan, pembayaran dan pelaporan honor asprak. Dibutuhkan waktu sekitar dua minggu untuk rekapitulasi dan validasi ratusan lembar BAP yang telah terkumpul setiap bulannya. Dibutuhkan pengolahan data lebih lanjut untuk menilai kinerja asprak berdasarkan data BAP. Untuk mengatasi permasalahan di atas maka dibangun aplikasi perhitungan honor dan kinerja asprak. Aplikasi ini digunakan untuk mengelola data BAP, perhitungan dan pelaporan honor, perhitungan nilai transkrip aktivitas kemahasiswaan (TAK dan pencetakan sertifikat asprak. Keterbatasan SDM atau biaya menyebabkan tidak semua perguruan tinggi dapat langsung membuat aplikasi yang dibutuhkan. Oleh karena itu aplikasi ini dibangun berbasis Software as A Service (SaaS. Aplikasi ini dikembangkan dengan metode analisis perancangan terstruktur dengan model waterfall. Pengumpulan data kebutuhan aplikasi dilakukan dengan survey ke fakultas-fakultas di Universitas Telkom. Hasilnya dianalisis dan dikembangkan menjadi rancangan aplikasi. Aplikasi diimplementasikan pada pemrograman PHP. Pengujian dilakukan dengan metode black box testing. Hasilnya berupa aplikasi SaaS untuk perhitungan honor dan pengukuran kinerja asisten praktikum. Perguruan tinggi pengguna aplikasi SaaS ini dapat melakukan kostumisasi terhadap fitur yang ada sesuai dengan kebutuhan.

  13. Honoring and Building on the Rich Literacy Practices of Young Bilingual and Multilingual Learners

    Science.gov (United States)

    Souto-Manning, Mariana

    2016-01-01

    In this article, the author invites teachers of children who are bilingual, multilingual, and at promise for bi-/multilingualism to honor and build on their rich literacy practices. To do so, she challenges ideas and labels that continuously disempower bilingual and multilingual learners. Souto-Manning establishes the understanding that education…

  14. Honoring the Past, Changing the Future: Bringing Native American Voices into Dance Theory Courses

    Science.gov (United States)

    Prichard, Robin

    2016-01-01

    The inclusion of Native American perspectives adds an important voice in honoring the multiplicities of histories and cultures inherent in American society. And yet, teachers run the risk of committing unknown offenses if they are not familiar with the potential pitfalls that longstanding asymmetrical power relations between cultures can produce.…

  15. An Examination of Classroom Social Environment on Motivation and Engagement of College Early Entrant Honors Students

    Science.gov (United States)

    Maddox, Richard S.

    2010-01-01

    This study set out to examine the relationships between the classroom social environment, motivation, engagement and achievement of a group of early entrant Honors students at a large urban university. Prior research on the classroom environment, motivation, engagement and high ability students was examined, leading to the assumption that the…

  16. Playing with Light: Adventures in Optics and Spectroscopy for Honors and Majors General Chemistry

    Science.gov (United States)

    van Staveren, Marie N.; Edwards, Kimberly D.; Apkarian, V. A.

    2012-01-01

    A lab was developed for use in an undergraduate honors and majors general chemistry laboratory to introduce students to optics, spectroscopy, and the underlying principles of quantum mechanics. This lab includes four mini-experiments exploring total internal reflection, the tunneling of light, spectra of sparklers and colored candles, and emission…

  17. Imagination and the Humanities in Honors across the Disciplines at a Jesuit University

    Science.gov (United States)

    Kraus, Joe

    2015-01-01

    Not every student has done honors work in the humanities, but all students experience research at a human level that necessarily recalls the work of the humanities. This article describes how Joe Kraus, a professor of literature at the University of Scranton, was inspired to see applied humanities in stories of human experiences, which helped him…

  18. Mobile Engagement at Scottsdale Community College: The Apple iPad in an English Honors Class

    Science.gov (United States)

    Tualla, Larry Tech

    2011-01-01

    This dissertation reports on an action research study that sought to discover how a new WiFi, tablet computing device, the Apple iPad, affected, enhanced, and impacted student engagement in an English Honors course at Scottsdale Community College. The researcher was also the instructor in the two semester, first-year, college composition sequence…

  19. Encouraging Self-Reflection by Business Honors Students: Reflective Writing, Films, and Self-Assessments

    Science.gov (United States)

    Yoder, Stephen A.

    2017-01-01

    "The Moral Imagination," edited by Oliver F. Williams is a collection of essays written nearly twenty years ago on how honors educators might teach students to develop a sense of moral imagination through literature, art, and film. The book's subtitle--"How Literature and Films Can Stimulate Ethical Reflection in the Business…

  20. A Legacy of Sacrifice and Honor: Celebrating Tribal Resilience and Military Service at Haskell Nations University

    Science.gov (United States)

    Warrington, Jacinta

    2017-01-01

    Haskell Indian Nations University opened 133 years ago, on September 17, 1884, as the U.S. Training and Industrial School--one of three original tribal boarding schools funded by the United States Congress. Three years later the school changed its name to Haskell Institute in honor of Chase Dudley Haskell, a U.S. representative from the Second…

  1. "The Endless Appetite": Honors Education and the Spirit of the Humanities

    Science.gov (United States)

    Martino, Andrew

    2015-01-01

    In a world that no longer privileges thinking, Andrew Martino writes here that we might need to consider what we are asking of our students--and why--when we ask them to think. This article presents a declaration of how Martino thinks honors education can serve as a resistant force against the increasing encroachment of a wholly utilitarian…

  2. Sea Lions and Honors Students: More in Common than You May Think

    Science.gov (United States)

    Lindemann-Biolsi, Kristy L.

    2014-01-01

    One can easily find a link between the general principles of learning in relation to both nonhuman and human animals. What may be a more difficult but equally important parallel is how these learning principles are applied to the training of animals and the teaching of honors students. The author considers what teachers can learn from observing…

  3. The Honorable Dr Adolfo Urso, Vice Minister for Foreign Trade, "Viceministro delle Attivita' Produttive, Italia"

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    Photo 01: The Honorable Dr Adolfo Urso, Deputy Minister for Productive Activities, Italy, visiting SM18 with (from l to r): Dr Roberto Saban, Technical Coordination and Planning, LHC machine; Prof. Luciano Maiani, CERN Director-General; Dr Mario Gerbino, Director General of the Ministry and Prof. Lucio Rossi, LHC Main Magnet and Superconductors (MMS) Group Leader. Photo 02: Prof. Luciano Maiani, CERN Director-General and The Honorable Dr Adolfo Urso, Deputy Minister for Productive Activities, Italy, in front of one of the LHC superconducting magnet in SM18. Photo 03 :In front of one of the LHC superconducting magnets - from left to right Dr Roberto Saban, Technical Coordination and Planning, LHC machine; The Honorable Dr Adolfo Urso, Deputy Minister for Productive Activities, Italy and Prof. Luciano Maiani, CERN Director-General. Photo 04: In the SM18 hall (from l. to r.) Prof. Luciano Maiani, CERN Director-General, The Honorable Dr Adolfo Urso, Deputy Minister for Productive Activities, Italy and Dr Mario Ge...

  4. Too Smart to Fail: Perceptions of Asian American Students' Experiences in a Collegiate Honors Program

    Science.gov (United States)

    Henfield, Malik S.; Woo, Hongryun; Lin, Yi-Chun; Rausch, Meredith A.

    2014-01-01

    There is a considerable history of misunderstandings associated with Asian American in education. Although many educators and scholars have begun to pay more attention to unique issues associated with this population, studies exploring these students' experiences as honors students in collegiate contexts are scant in the educational literature.…

  5. Preparing students for global citizenship: the effects of a Dutch undergraduate honors course

    NARCIS (Netherlands)

    Schutte, Ingrid W.; Kamans, Elanor; Wolfensberger, Marca; Veugelers, Wiel

    2017-01-01

    Using a mixed method approach, this case study investigates effects on the participating students () of an undergraduate honors course in the Netherlands, aimed at global justice citizenship. Knowledge about effects of global citizenship courses is still limited. The Ethical Sensitivity Scale

  6. Setting the Table for Diversity. National Collegiate Honors Council Monograph Series

    Science.gov (United States)

    Coleman, Lisa L., Ed.; Kotinek, Jonathan D., Ed.

    2010-01-01

    This monograph provides a cross section of policy and practice through the voices and experiences of honors faculty, staff, and students from across the nation. While far from comprehensive, this volume does pick up different strands of thinking on diversity to present a rich and complicated understanding of what diversity is, why it is important,…

  7. Highlighting the Transfer, Honors, and Excellence Workshop. CSCC Bulletin, Issue 7, 1983.

    Science.gov (United States)

    Center for the Study of Community Colleges, Los Angeles, CA.

    Summaries are provided for the major presentations given at a workshop on honors, transfer, and excellence, held in Los Angeles in October 1982. Following a brief overview of the main topics covered, highlights are presented from the talks of: (1) Robert McCabe, president of Miami-Dade Community College (MDCC), who urged participants to set high…

  8. Sanitation, Stress, and Life Stage: A Systematic Data Collection Study among Women in Odisha, India.

    Science.gov (United States)

    Hulland, Kristyna R S; Chase, Rachel P; Caruso, Bethany A; Swain, Rojalin; Biswal, Bismita; Sahoo, Krushna Chandra; Panigrahi, Pinaki; Dreibelbis, Robert

    2015-01-01

    Emerging evidence demonstrates how inadequate access to water and sanitation is linked to psychosocial stress, especially among women, forcing them to navigate social and physical barriers during their daily sanitation routines. We examine sanitation-related psychosocial stress (SRPS) across women's reproductive lives in three distinct geographic sites (urban slums, rural villages, and rural tribal villages) in Odisha, India. We explored daily sanitation practices of adolescent, newly married, pregnant, and established adult women (n = 60) and identified stressors encountered during sanitation. Responding to structured data collection methods, women ranked seven sanitation activities (defecation, urination, menstruation, bathing, post-defecation cleaning, carrying water, and changing clothes) based on stress (high to low) and level of freedom (associated with greatest freedom to having the most restrictions). Women then identified common stressors they encountered when practicing sanitation and sorted stressors in constrained piles based on frequency and severity of each issue. The constellation of factors influencing SRPS varies by life stage and location. Overall, sanitation behaviors that were most restricted (i.e., menstruation) were the most stressful. Women in different sites encountered different stressors, and the level of perceived severity varied based on site and life stage. Understanding the influence of place and life stage on SRPS provides a nuanced understanding of sanitation, and may help identify areas for intervention.

  9. Sanitation, Stress, and Life Stage: A Systematic Data Collection Study among Women in Odisha, India.

    Directory of Open Access Journals (Sweden)

    Kristyna R S Hulland

    Full Text Available Emerging evidence demonstrates how inadequate access to water and sanitation is linked to psychosocial stress, especially among women, forcing them to navigate social and physical barriers during their daily sanitation routines. We examine sanitation-related psychosocial stress (SRPS across women's reproductive lives in three distinct geographic sites (urban slums, rural villages, and rural tribal villages in Odisha, India. We explored daily sanitation practices of adolescent, newly married, pregnant, and established adult women (n = 60 and identified stressors encountered during sanitation. Responding to structured data collection methods, women ranked seven sanitation activities (defecation, urination, menstruation, bathing, post-defecation cleaning, carrying water, and changing clothes based on stress (high to low and level of freedom (associated with greatest freedom to having the most restrictions. Women then identified common stressors they encountered when practicing sanitation and sorted stressors in constrained piles based on frequency and severity of each issue. The constellation of factors influencing SRPS varies by life stage and location. Overall, sanitation behaviors that were most restricted (i.e., menstruation were the most stressful. Women in different sites encountered different stressors, and the level of perceived severity varied based on site and life stage. Understanding the influence of place and life stage on SRPS provides a nuanced understanding of sanitation, and may help identify areas for intervention.

  10. [Prognostic criteria of efficacy of programmed laparoscopic sanitation of the abdominal cavity in peritonitis].

    Science.gov (United States)

    Salakhov, E K; Vlasov, A P; Bolotskyh, V A

    To define prognostic criteria of efficacy of programmed laparoscopic sanitation of the abdominal cavity in peritonitis. There were 32 patients after programmed laparoscopic sanitation of abdominal cavity for peritonitis due to different acute surgical diseases. Subsequently 12 of them required relaparotomy due to poor effectiveness of laparoscopic sanitation. Comprehensive clinical examination and laboratory assessment of some indexes of homeostasis and oxidative status were conducted. Prognostic clinical and laboratory criteria of efficacy of laparoscopic abdominal sanitation were suggested after analysis of intraoperative data during primary surgery and laboratory values in the 1st postoperative day. The offered prognostic criteria allow to define further management of peritonitis patients after primary laparotomy.

  11. Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

    DEFF Research Database (Denmark)

    Andersen, Thomas Rieks; Dam, Henrik Friis; Hösel, Markus

    2014-01-01

    the manufacture of completely functional devices in exceptionally high yields. Critical to the ink and process development is a carefully chosen technology transfer to industry method where first a roll coater is employed enabling contactless stack build up, followed by a small roll-to-roll coater fitted to an X...

  12. Constant-roll tachyon inflation and observational constraints

    Science.gov (United States)

    Gao, Qing; Gong, Yungui; Fei, Qin

    2018-05-01

    For the constant-roll tachyon inflation, we derive the analytical expressions for the scalar and tensor power spectra, the scalar and tensor spectral tilts and the tensor to scalar ratio to the first order of epsilon1 by using the method of Bessel function approximation. The derived ns-r results are compared with the observations, we find that only the constant-roll inflation with ηH being a constant is consistent with the observations and observations constrain the constant-roll inflation to be slow-roll inflation. The tachyon potential is also reconstructed for the constant-roll inflation which is consistent with the observations.

  13. Physics of Fresh Produce Safety: Role of Diffusion and Tissue Reaction in Sanitization of Leafy Green Vegetables with Liquid and Gaseous Ozone-Based Sanitizers.

    Science.gov (United States)

    Shynkaryk, Mykola V; Pyatkovskyy, Taras; Mohamed, Hussein M; Yousef, Ahmed E; Sastry, Sudhir K

    2015-12-01

    Produce safety has received much recent attention, with the emphasis being largely on discovery of how microbes invade produce. However, the sanitization operation deserves more attention than it has received. The ability of a sanitizer to reach the site of pathogens is a fundamental prerequisite for efficacy. This work addresses the transport processes of ozone (gaseous and liquid) sanitizer for decontamination of leafy greens. The liquid sanitizer was ineffective against Escherichia coli K-12 in situations where air bubbles may be trapped within cavities. A model was developed for diffusion of sanitizer into the interior of produce. The reaction rate of ozone with the surface of a lettuce leaf was determined experimentally and was used in a numerical simulation to evaluate ozone concentrations within the produce and to determine the time required to reach different locations. For aqueous ozone, the penetration depth was limited to several millimeters by ozone self-decomposition due to the significant time required for diffusion. In contrast, gaseous sanitizer was able to reach a depth of 100 mm in several minutes without depletion in the absence of reaction with surfaces. However, when the ozone gas reacted with the produce surface, gas concentration was significantly affected. Simulation data were validated experimentally by measuring ozone concentrations at the bottom of a cylinder made of lettuce leaf. The microbiological test confirmed the relationship between ozone transport, its self-decomposition, reaction with surrounding materials, and the degree of inactivation of E. coli K-12. Our study shows that decontamination of fresh produce, through direct contact with the sanitizer, is more feasible with gaseous than with aqueous sanitizers. Therefore, sanitization during a high-speed washing process is effective only for decontaminating the wash water.

  14. Tratamento conjugado de lixiviado de aterro sanitário e esgoto sanitário em lagoas de estabilização rasas

    OpenAIRE

    Campos, Andrezza Raphaella Costa

    2012-01-01

    A busca para desenvolver alternativas viáveis e eficientes para o tratamento do lixiviado de aterro sanitário, fez com que surgisse a iniciativa de pesquisar sobre o tratamento conjugado entre lixiviado de aterro sanitário e esgoto sanitário, visando tratar o lixiviado diluindo este no esgoto, reduzindo as elevadas concentrações de matéria orgânica e nitrogênio amoniacal, deixando em proporções adequadas ao tratamento convencional. Neste estudo, foi analisada a eficiência do processo de trata...

  15. Finite-element model to predict roll-separation force and defects during rolling of U-10Mo alloys

    Science.gov (United States)

    Soulami, Ayoub; Burkes, Douglas E.; Joshi, Vineet V.; Lavender, Curt A.; Paxton, Dean

    2017-10-01

    A major goal of the Convert Program of the U.S. Department of Energy's National Nuclear Security Administration (DOE/NNSA) is to enable high-performance research reactors to operate with low-enriched uranium rather than the high-enriched uranium currently used. To this end, uranium alloyed with 10 wt% molybdenum (U-10Mo) represents an ideal candidate because of its stable gamma phase, low neutron caption cross section, acceptable swelling response, and predictable irradiation behavior. However, because of the complexities of the fuel design and the need for rolled monolithic U-10Mo foils, new developments in processing and fabrication are necessary. This study used a finite-element code, LS-DYNA, as a predictive tool to optimize the rolling process. Simulations of the hot rolling of U-10Mo coupons encapsulated in low-carbon steel were conducted following two different schedules. Model predictions of the roll-separation force and roll pack thicknesses at different stages of the rolling process were compared with experimental measurements. The study reported here discussed various attributes of the rolled coupons revealed by the model (e.g., waviness and thickness non-uniformity like dog-boning). To investigate the influence of the cladding material on these rolling defects, other cases were simulated: hot rolling with alternative can materials, namely, 304 stainless steel and Zircaloy-2, and bare-rolling. Simulation results demonstrated that reducing the mismatch in strength between the coupon and can material improves the quality of the rolled sheet. Bare-rolling simulation results showed a defect-free rolled coupon. The finite-element model developed and presented in this study can be used to conduct parametric studies of several process parameters (e.g., rolling speed, roll diameter, can material, and reduction).

  16. 75 FR 64246 - Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil: Correction to Notice of...

    Science.gov (United States)

    2010-10-19

    ...-Rolled Carbon-Quality Steel Products From Brazil: Correction to Notice of Antidumping Duty Order AGENCY... certain hot-rolled flat-rolled carbon-quality steel products from Brazil. See Antidumping Duty Order: Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, 67 FR 11093 (March 12, 2002...

  17. Troll, a Language for specifying Dice-rolls

    DEFF Research Database (Denmark)

    Mogensen, Torben Ægidius

    2009-01-01

    Dice are used in many games, and often in fairly complex ways that make it difficult to unambiguously describe the dice-roll mechanism in plain language. Many role-playing games, such as Dungeons & Dragons, use a formalised notation for some instances of dice-rolls. This notation, once explained...... natural language to describe rolls. Even Dungeons & Dragons use formal notation only for some of the dice-roll methods used in the game. Hence, a more complete notation is in this paper proposed, and a tool for pseudo-random rolls and (nearly) exact probability calculations is described. The notation...... is called "Troll", combining the initial of the Danish word for dice ("terninger") with the English word "roll". It is a development of the language Roll described in an earlier paper. The present paper describes the most important features of Troll and its implementation....

  18. Cold rolling precision forming of shaft parts theory and technologies

    CERN Document Server

    Song, Jianli; Li, Yongtang

    2017-01-01

    This book presents in detail the theory, processes and equipment involved in cold rolling precision forming technologies, focusing on spline and thread shaft parts. The main topics discussed include the status quo of research on cold rolling precision forming technologies; the design and calculation of process parameters; the numerical simulation of cold rolling forming processes; and the equipment used in cold rolling forming. The mechanism of cold rolling forming is extremely complex, and research on the processes, theory and mechanical analysis of spline cold rolling forming has remained very limited to date. In practice, the forming processes and production methods used are mainly chosen on the basis of individual experience. As such, there is a marked lack of both systematic, theory-based guidelines, and of specialized books covering theoretical analysis, numerical simulation, experiments and equipment used in spline cold rolling forming processes – all key points that are included in this book and ill...

  19. ROLLING PROCESS WITH OHSAS AND TEXTURE FORMATION– A REVIEW

    Directory of Open Access Journals (Sweden)

    P. CHANDRAMOHAN

    2009-03-01

    Full Text Available Rolling is a mechanical treatment, which plays an important part in the processing of ferrous and nonferrous alloys. Texturing is an important phenomenon that occurs after rolling process. Preferred orientation increases the strength of the material enormously. Hence the research is focused on the rolling studies and the texture formation, which occurs after rolling process. This review mainly focuses on rolling process carried out in different alloys. It also highlights the analysis made on various rolling parameters for improving the mechanical properties. Texture studies carried on various ferrous and non-ferrous alloys; particularly in nitrogen alloyed duplex stainless steel is discussed. Finally the need for implementation of occupational health and safety during a thermomechanical treatment is also discussed. The state of art in this field is encouraging and showing positive signs of commercializing rolled nitrogen alloyed duplex stainless steel after proper texture control.

  20. DESIGN OF PARTICULATE MATERIAL COMPACTOR ROLLS DIAMETER

    Directory of Open Access Journals (Sweden)

    Peter Peciar

    2017-09-01

    Full Text Available At present, in a period of an industrial expansion great emphasis is placed on the environment. That means aiming for a reduced energy consumption, and also lessening dustiness from very fine powder material. This category also includes particulate material agglomeration processes. Because this process is very energy-intensive, it is necessary to correctly design these devices. The aim of this paper is to focus on a theoretical design of a production compactor with the rolls diameter for an experimental particulate material, based on Johanson’s theory and experimentally measured material properties. The material used for experimental measurements was an NPK-based industrial fertilizer consisting of several components. The results of this paper is the dependence of the ratio of the maximum compression pressure to the initial compression pressure from the rolls diameter of the proposed compactor.

  1. Contact conditions in skin-pass rolling

    DEFF Research Database (Denmark)

    Kijima, Hideo; Bay, Niels

    2007-01-01

    The special contact conditions in skin-pass rolling of steel strip is analysed by studying plane strain upsetting of thin sheet with low reduction applying long narrow tools and dry friction conditions. An extended sticking region is estimated by an elasto-plastic FEM analysis of the plane strain...... upsetting. This sticking region causes a highly inhomogeneous elasto-plastic deformation with large influence of work-hardening and friction. A numerical analysis of skin-pass rolling shows the same contact conditions, i.e. an extended sticking region around the center of the contact zone. The calculated...... size of the sticking region with varying contact length and pressure/reduction is experimentally verified by plane strain upsetting tests measuring the local surface deformation of the work pieces after unloading....

  2. A NOVEL ROLLING BASED DNA CRYPTOGRAPHY

    Directory of Open Access Journals (Sweden)

    Rejwana Haque

    2017-05-01

    Full Text Available DNA Cryptography can be defined as a hiding data in terms of DNA Sequence. In this paper we propose a new DNA Encryption Technique where three different types of ordering is use to make binary data into cipher text. The main stages of this encryption technique are: Key Analysis, Data and Key Arrangement, Roll in encoding, Secondary Arrangement and Shifting. Decryption process has six main steps to obtain the original binary data from the encrypted data and key. Decryption steps are: Key Analysis, Shifting, Secondary Arrangement, Key Arrangement, Roll-out decoding, Data Arrangement. Here key size is half of binary data and the key is varies from data to data so key are used as one time pad. In this paper we also discuss about the implementation from sample data and security analysis for this given method.

  3. Slipping and rolling on an inclined plane

    International Nuclear Information System (INIS)

    Aghamohammadi, Cina; Aghamohammadi, Amir

    2011-01-01

    In the first part of the paper, using a direct calculation two-dimensional motion of a particle sliding on an inclined plane is investigated for general values of friction coefficient (μ). A parametric equation for the trajectory of the particle is also obtained. In the second part of the paper, the motion of a sphere on the inclined plane is studied. It is shown that the evolution equation for the contact point of a sliding sphere is similar to that of a point particle sliding on an inclined plane whose friction coefficient is 7/2 μ. If μ > 2/7 tan θ, for any arbitrary initial velocity and angular velocity, the sphere will roll on the inclined plane after some finite time. In other cases, it will slip on the inclined plane. In the case of rolling, the centre of the sphere moves on a parabola. Finally the velocity and angular velocity of the sphere are exactly computed.

  4. Properties of hot rolled steels for enamelling

    International Nuclear Information System (INIS)

    Gavrilovski, Dragica; Gavrilovski, Milorad

    2003-01-01

    The results of an investigation of the structure and properties of experimental produced hot rolled steels suitable for enamelling are presented in the paper. Hot rolled steels for enamelling represent a special group of the steels for conventional enamelling. Their quality has to be adapted to the method and conditions of enamelling. Therefore, these steels should meet some specific requirements. In addition to usual investigation of the chemical composition and mechanical properties, microstructure and quality of the steel surface also were investigated. The basic aim was to examine steels capability for enamelling, i. e. steels resistance to the fish scales phenomena, by trial enamelling, as well as quality of the steel - enamel contact surface, to evaluate the binding. Also, the changes of the mechanical properties, especially the yield point, during thermal treatment, as a very specific requirement, were investigated, by simplified method. Good results were obtained confirming the steels capability for enamelling. (Original)

  5. Dynamics and Stability of Rolling Viscoelastic Tires

    Energy Technology Data Exchange (ETDEWEB)

    Potter, Trevor [Univ. of California, Berkeley, CA (United States)

    2013-04-30

    Current steady state rolling tire calculations often do not include treads because treads destroy the rotational symmetry of the tire. We describe two methodologies to compute time periodic solutions of a two-dimensional viscoelastic tire with treads: solving a minimization problem and solving a system of equations. We also expand on work by Oden and Lin on free spinning rolling elastic tires in which they disovered a hierachy of N-peak steady state standing wave solutions. In addition to discovering a two-dimensional hierarchy of standing wave solutions that includes their N-peak hiearchy, we consider the eects of viscoelasticity on the standing wave solutions. Finally, a commonplace model of viscoelasticity used in our numerical experiments led to non-physical elastic energy growth for large tire speeds. We show that a viscoelastic model of Govindjee and Reese remedies the problem.

  6. Estimating the Cost and Payment for Sanitation in the Informal Settlements of Kisumu, Kenya: A Cross Sectional Study

    Directory of Open Access Journals (Sweden)

    Sheillah Simiyu

    2017-01-01

    Full Text Available Lack of sanitation facilities is a common occurrence in informal settlements that are common in most developing countries. One challenge with sanitation provision in these settlements is the cost and financing of sanitation. This study aimed at estimating the cost of sanitation, and investigating the social and economic dynamics within Kisumu’s informal settlements that hinder provision and uptake of sanitation facilities. Primary data was collected from residents of the settlements, and using logistic and hedonic regression analysis, we identify characteristics of residents with sanitation facilities, and estimate the cost of sanitation as revealed in rental prices. Our study finds that sanitation constitutes approximately 54% of the rent paid in the settlements; and dynamics such as landlords and tenants preferences, and sharing of sanitation facilities influence provision and payment for sanitation. This study contributes to general development by estimating the cost of sanitation, and further identifies barriers and opportunities for improvement including the interplay between landlords and tenants. Provision of sanitation in informal settlements is intertwined in social and economic dynamics, and development approaches should target both landlords and tenants, while also engaging various stakeholders to work together to identify affordable and appropriate sanitation technologies.

  7. A Model of Active Roll Vehicle Suspension

    Directory of Open Access Journals (Sweden)

    I. Čech

    2010-01-01

    Full Text Available This paper describes active suspension with active roll for four-wheel vehicle (bus by means of an in-series pump actuator with doubled hydropneumatic springs. It also gives full control law with no sky-craping. Lateral stiffness and solid axle geometry in the mechanical model are not neglected. Responses to lateral input as well as responses to statistical unevennesses show considerable improvement of passengers comfort and safety when cornering.

  8. Extreme chirality in Swiss roll metamaterials

    International Nuclear Information System (INIS)

    Demetriadou, A; Pendry, J B

    2009-01-01

    The chiral Swiss roll metamaterial is a resonant, magnetic medium that exhibits a negative refractive band for one-wave polarization. Its unique structure facilitates huge chiral effects: a plane polarized wave propagating through this system can change its polarization by 90 deg. in less than a wavelength. Such chirality is at least 100 times greater than previous structures have achieved. In this paper, we discuss this extreme chiral behaviour with both numerical and analytical results.

  9. Rolling circle amplification of metazoan mitochondrialgenomes

    Energy Technology Data Exchange (ETDEWEB)

    Simison, W. Brian; Lindberg, D.R.; Boore, J.L.

    2005-07-31

    Here we report the successful use of rolling circle amplification (RCA) for the amplification of complete metazoan mt genomes to make a product that is amenable to high-throughput genome sequencing techniques. The benefits of RCA over PCR are many and with further development and refinement of RCA, the sequencing of organellar genomics will require far less time and effort than current long PCR approaches.

  10. Contact fatigue in rolling-element bearings

    CSIR Research Space (South Africa)

    Fernandes, PJL

    1997-06-01

    Full Text Available to the "cyclone pitting effect" also observed in gear teeth \\[1\\]. The initiation of surface cracks under rollin~sliding contact can be significantly accelerated by the presence of stress concentration sites on the contact surf... formed by rolling and rollin~sliding contact fatigue may progress to form a more severe form of damage known as flaking \\[3\\]. This results in the formation of large, irregular pits which cause rapid deterioration...

  11. [Water, sanitation and diarrheal risk in Nouakchott Urban Community, Mauritania].

    Science.gov (United States)

    Sy, Ibrahima; Traoré, Doulo; Niang Diène, Aminata; Koné, Brama; Lô, Baidy; Faye, Ousmane; Utzinger, Jürg; Cissé, Guéladio; Tanner, Marcel

    2017-12-05

    Drinking water and sanitation are two factors of inter-linked inextricably public health especially in the city of Nouakchott where the low availability of these services leads to a multitude of use and hygiene practices involving a complex socio-ecological system with an increased risk of waterborne diseases transmission (diarrhea, cholera, etc.). Thus, this contribution analyzes the impact of socio-ecological system on the development of diarrheal diseases by using socio-environmental and epidemiological data from various sources (national surveys and registries consultation). Overall, the results show that only 25.6% of households have access to drinking water sources while 69.8% of the populations dispose improved latrines. Hence, the weakness in environmental sanitation conditions explains the level of diarrheal morbidity averring 12.8% at the urban level, with an unequal spatial distribution showing less affected communes such as Tevragh Zeina (9.1%) and municipalities more affected like Sebkha (19.1%). The distribution according to the age categories shows that children under 5 years are the most affected with 51.7% followed by people aged over 14 with 34.2%. The correlation analysis between socio-economic, environmental and epidemiological variables reveals a number of significant associations: untreated water consumption and diarrhea (R = 0.429); collection of wastewater and occurrence of diarrhea ; existence of improved latrine and reduction of diarrheal risk (R = 0.402). Therefore, exposure to diarrheal diseases through the prism of water and sanitation is a real public health problem that requires a systemic and integrated approach to improving environmental health.

  12. Rapid roll inflation with conformal coupling

    International Nuclear Information System (INIS)

    Kofman, Lev; Mukohyama, Shinji

    2008-01-01

    Usual inflation is realized with a slow rolling scalar field minimally coupled to gravity. In contrast, we consider dynamics of a scalar with a flat effective potential, conformally coupled to gravity. Surprisingly, it contains an attractor inflationary solution with the rapidly rolling inflaton field. We discuss models with the conformal inflaton with a flat potential (including hybrid inflation). There is no generation of cosmological fluctuations from the conformally coupled inflaton. We consider realizations of modulated (inhomogeneous reheating) or curvaton cosmological fluctuations in these models. We also implement these unusual features for the popular string-theoretic warped inflationary scenario, based on the interacting D3-D3 branes. The original warped brane inflation suffers a large inflaton mass due to conformal coupling to 4-dimensional gravity. Instead of considering this as a problem and trying to cure it with extra engineering, we show that warped inflation with the conformally coupled, rapidly rolling inflaton is yet possible with N=37 efoldings, which requires low-energy scales 1-100 TeV of inflation. Coincidentally, the same warping numerology can be responsible for the hierarchy. It is shown that the scalars associated with angular isometries of the warped geometry of compact manifold (e.g. S 3 of Klebanov-Strassler (KS) geometry) have solutions identical to conformally coupled modes and also cannot be responsible for cosmological fluctuations. We discuss other possibilities

  13. Rapid roll inflation with conformal coupling

    Science.gov (United States)

    Kofman, Lev; Mukohyama, Shinji

    2008-02-01

    Usual inflation is realized with a slow rolling scalar field minimally coupled to gravity. In contrast, we consider dynamics of a scalar with a flat effective potential, conformally coupled to gravity. Surprisingly, it contains an attractor inflationary solution with the rapidly rolling inflaton field. We discuss models with the conformal inflaton with a flat potential (including hybrid inflation). There is no generation of cosmological fluctuations from the conformally coupled inflaton. We consider realizations of modulated (inhomogeneous reheating) or curvaton cosmological fluctuations in these models. We also implement these unusual features for the popular string-theoretic warped inflationary scenario, based on the interacting D3-D¯3 branes. The original warped brane inflation suffers a large inflaton mass due to conformal coupling to 4-dimensional gravity. Instead of considering this as a problem and trying to cure it with extra engineering, we show that warped inflation with the conformally coupled, rapidly rolling inflaton is yet possible with N=37 efoldings, which requires low-energy scales 1 100 TeV of inflation. Coincidentally, the same warping numerology can be responsible for the hierarchy. It is shown that the scalars associated with angular isometries of the warped geometry of compact manifold (e.g. S3 of Klebanov-Strassler (KS) geometry) have solutions identical to conformally coupled modes and also cannot be responsible for cosmological fluctuations. We discuss other possibilities.

  14. Swiss roll operation for giant fibroadenoma.

    Science.gov (United States)

    Soomro, Saleem A; Memon, Sohail A; Mohammad, Noor; Maher, Mumtaz

    2009-01-01

    Fibroadenoma 5 cm or more is called giant fibroadenoma. Giant fibroadenoma can distort the shape of breast and causes asymmetry, so it should be excised. There are several techniques for excision of giant fibroadenoma. In our technique we remove them through cosmetically acceptable circumareolar incision to maintain the shape and symmetry of breast. The objectives were to assess the cosmetic results of Swiss roll operation for giant fibroadenoma. The study was conducted for six years from January, 2002 to December, 2007. Seventy patients of giant fibroadenoma were included in this study. They were diagnosed on history and clinical examination supported by ultrasound and postoperative histopathological examination. Data were collected from outpatient department and operation theatre. Swiss roll operation was performed under general anaesthesia. Mean tumor size was 6.38 cm. Three cm and 4 cm incisions were used for tumour 6 cm in size respectively. Skin closed with Vicryl 3/0 subcuticular stitches. Sixteen out of 70 patients had no scar while others hadminimal scar. All patients had normal shape and symmetry of breast. On histopathology fibroadenoma was confirmed. Giant fibroadenoma should be removed through cosmetically acceptable cicumareolar incision especially in unmarried young females who have small breast. Swiss-roll operation is superior in maintaining the shape and symmetry of breast. No major complication was found in our series except seroma formation in 10 patients.

  15. Reflections on Public Health: Captain Hart and Sanitation

    Centers for Disease Control (CDC) Podcasts

    2006-10-01

    This podcast consists of segments of an interview conducted by Capt. Kathleen McDuffie, CDC, with Capt. Russell Hart, a 100 year old retired sanitary engineer of the U.S. Public Health Service Commissioned Corps as he reflects on his work in environmental sanitation and the development of local health departments. The interview was conducted in 2006.  Created: 10/1/2006 by Coordinating Center for Health Information and Service (CCHIS), National Center for Health Marketing (NCHM).   Date Released: 1/7/2009.

  16. Evolution of Water Supply, Sanitation, Wastewater, and Stormwater Technologies Globally

    Directory of Open Access Journals (Sweden)

    Andreas N. Angelakis

    2015-02-01

    Full Text Available This paper provides an outline of history of hydro-technologies in the west and the east. It is an overview of the special issue on “the evolution of hydro-technologies globally”, in which the key topics regarding the history of water and sanitation worldwide, and its importance to future cities are presented and discussed. It covers a wide range of relevant historical issues, and is presented in three categories: productivity assessment, institutional framework and mechanisms, and governance aspects. This paper concludes by discussing the challenges on future research in this field of study.

  17. Between honor and shame :|bmartyrdom in 2 Maccabees 6-7 within the socio-cultural arena

    OpenAIRE

    Hefer, Barend Joachim

    2012-01-01

    The study, “Between honor and shame: Martyrdom in 2 Maccabees 6-7 within the socio-cultural arena”, presents a look at how the community viewed martyrdom in 2 Maccabees 6:18-7:42 from the perspective of honor and shame. The chief objective is to determine whether or not the community supported or challenged the notion of the martyrs’ death being either honorable or shameful. In order to reach a satisfactory conclusion to this objective, this study set as goals the identification of key themes...

  18. Guide related to structure sanitation in basic nuclear installations. Guide Nr 14, Release of the 30 August 2016

    International Nuclear Information System (INIS)

    2016-01-01

    This guide defines recommendations made by the ASN regarding the sanitation methodology to be applied to buildings and structures of any basic nuclear installation. After a recall of the general doctrine for the management of wastes in basic nuclear installations, the guide presents the ASN doctrine for structure sanitation which distinguishes complete sanitation, extended sanitation, and sanitation in operation phase. It presents principles for the sanitation of component structures of an area of possible production of nuclear wastes. It indicates administrative procedures to be applied before and after sanitation works, notably when the radiological condition of structures has been made compatible or not with any use. After indication of requirements in terms of quality insurance, modalities of definition of defence lines (from first to fourth) are discussed. Requirements regarding the performance of sanitation operations are reviewed

  19. A caracterização do risco sanitário nos processos administrativos da vigilância sanitária

    Directory of Open Access Journals (Sweden)

    Max Rogério Alves

    2012-12-01

    Full Text Available Estudo da caracterização do risco sanitário (avaliação e gerenciamento de risco nos processos administrativos da vigilância sanitária, a partir de um estudo de caso relativo ao controle sanitário de portos, aeroportos e fronteiras. A análise de decisões tomadas no âmbito de processos sanitários permitiu evidenciar que o grau de risco é superficialmente tratado neles, inferindo-se que a caracterização do risco nos referidos processos aproxima-se mais da aplicação do senso comum do que de uma abordagem científica.

  20. The true costs of participatory sanitation: Evidence from community-led total sanitation studies in Ghana and Ethiopia.

    Science.gov (United States)

    Crocker, Jonny; Saywell, Darren; Shields, Katherine F; Kolsky, Pete; Bartram, Jamie

    2017-12-01

    Evidence on sanitation and hygiene program costs is used for many purposes. The few studies that report costs use top-down costing methods that are inaccurate and inappropriate. Community-led total sanitation (CLTS) is a participatory behavior-change approach that presents difficulties for cost analysis. We used implementation tracking and bottom-up, activity-based costing to assess the process, program costs, and local investments for four CLTS interventions in Ghana and Ethiopia. Data collection included implementation checklists, surveys, and financial records review. Financial costs and value-of-time spent on CLTS by different actors were assessed. Results are disaggregated by intervention, cost category, actor, geographic area, and project month. The average household size was 4.0 people in Ghana, and 5.8 people in Ethiopia. The program cost of CLTS was $30.34-$81.56 per household targeted in Ghana, and $14.15-$19.21 in Ethiopia. Most program costs were from training for three of four interventions. Local investments ranged from $7.93-$22.36 per household targeted in Ghana, and $2.35-$3.41 in Ethiopia. This is the first study to present comprehensive, disaggregated costs of a sanitation and hygiene behavior-change intervention. The findings can be used to inform policy and finance decisions, plan program scale-up, perform cost-effectiveness and benefit studies, and compare different interventions. The costing method is applicable to other public health behavior-change programs. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  1. Rolls-Royce digital Rod Control System

    International Nuclear Information System (INIS)

    Pouillot, M.

    2010-01-01

    Full text of publication follows: Rolls-Royce has developed a new generation of Rod Control System, based on 40 years of experience. The fifth-generation Rod Control System (RCS) from Rolls-Royce offers a reliable, modular design with adaptability to your preferred platform, for modernization projects or new reactors. Flexible implementation provides the option for you to keep existing cabinets, which permits you to optimize installation approach. Main features for the power part: - Control Rod Drive Mechanism (CRDM) type: 3-coil. - Independent control of each sub-bank. - Each sub-bank is controlled by a cycler unit and 3 identical power racks, each including 4 identical power modules and a common power-supply module. - Coil-per-coil digital control: each power module embeds power-conversion, current-control, and current-monitoring functions for one coil. Control and monitoring are carried out by separate electronics in the module. Current is digitized and fully monitored by means of min-max templates. - A double-hold function is included: a power module assigned to a gripper will activate its coil if a fault risking to cause a reactor trip occurs. - Power modules are standardized, hot-pluggable and self-configured: a power module includes a set of parameters for each type of coil SG, MG, LC. The module recognizes the rack it is plugged in, and chooses automatically parameters to be used. Main benefits: - Reduced operational, maintenance, training, and inventory costs: standardization of power modules and integration of control and monitoring on the same PC-card lead to a drastic reduction of spare part types, and simplification of the system. - Easy maintenance: - Replacement of a power module solves nearly all failures due to current control or monitoring for a coil. It is done instantly thanks to hot-plug capability. - On the front plate of power-modules, LEDs provide useful information for diagnostic: current setpoint from cycler, output current bar

  2. Water and sanitation provision in eThekwini Municipality: a spatially differentiated approach

    NARCIS (Netherlands)

    Sutherland, C.; Hordijk, M.; Lewis, B.; Meyer, C.; Buthelezi, S.

    2014-01-01

    The rescaling of responsibilities in water governance in South Africa has enabled strong water services authorities, such as the eThekwini Water and Sanitation Unit (EWS) in eThekwini Municipality, to play a leading role in shaping water and sanitation policy in South Africa. Yet water governance in

  3. Innovations in sanitation for sustainable urban growth; modernized mixtures in an east african context

    NARCIS (Netherlands)

    Letema, S.; Van Vliet, B.; Van Lier, J.B.

    2012-01-01

    Urbanisation of poverty and informality in East Africa poses a threat to public health and environmental protection, perpetuating social exclusion and inequalities, while it creates service gaps. Neither conventional on-site sanitation nor modern centralised off-site sanitation provisions are

  4. The evolution of the right to water and sanitation: differentiating the implications

    NARCIS (Netherlands)

    Obani, P.; Gupta, J.

    2015-01-01

    Since 1980, the right to water has been seen mainly as implicitly subsumed under other social human and political rights. The global recognition of the need for access to sanitation services has led to formulations of a right to sanitation that emphasizes both the responsibilities of States and the

  5. Legal pluralism in the area of human rights: water and sanitation

    NARCIS (Netherlands)

    Obani, P.; Gupta, J.

    2014-01-01

    Access to clean drinking water and adequate sanitation and hygiene facilities is crucial to achieving social and environmental sustainability. We examine the global human water and sanitation right from a legal pluralism perspective to see if it is indifferent to, competes with, accommodates, or is

  6. Water and Sanitation in Urban Slum: A Case from Bandung Municipality, West Java, Indonesia

    NARCIS (Netherlands)

    Nastiti, A.; Primasuri, W.A.; Setiani, B.; Sudradjat, A.; Latifah, I.; Roosmini, D.; Smits, A.J.M.; Meijerink, S.V.

    2014-01-01

    Providing equal access among urban quintiles is the main challenge in urban water and sanitation sector. This paper tries to depict the choice and behavior regarding drinking water and sanitation of 127 slum households in Bandung Municipality. Issues explored using close-ended questionnaires are

  7. Water and sanitation in Nigeria: a case study of Ondo State ...

    African Journals Online (AJOL)

    Water and sanitation have been recognized as critical to ensure good quality of life. This paper examines the existing water supply and sanitation in Ondo State, Nigeria with a view to determine the extent of deficiency and what will be required to meet the Millennium Development Goals that seeks to halve the Population of ...

  8. Inactivation of E.coli 0157:H7 and Salmonella enterica on strawberries by sanitizing solutions

    Science.gov (United States)

    A recent foodborne outbreak of E. coli O157:H7 in Oregon associated with the consumption of fresh strawberries highlights the need for effective sanitizing washes, suitable for the inactivation of pathogens on fresh produce. Sanitizing solutions were screened for decontaminating E. coli O157:H7 (E...

  9. Evaluation of antibacterial activity of hand sanitizers – an in vitro study

    African Journals Online (AJOL)

    Hand hygiene, particularly hand sanitizing, is essential in reducing infectious disease transmission. The recent outbreak of Ebola in Nigeria both increased public awareness of the practice of hand sanitizing and resulted in the introduction of new products to the Nigerian market. This study set out to explore the actual ...

  10. Addressing rural health and poverty through water sanitation and hygiene: Gender perspectives

    CSIR Research Space (South Africa)

    Ngorima, E

    2008-11-01

    Full Text Available that it is essential to empower women in all aspects of water and sanitation, through proper hygiene education and service provision. Using the case study, the aim of this paper is to present a case for factoring in gender perspectives in water and sanitation provision...

  11. Stability of nonfouling electroless nickel-polytetrafluoroethylene coatings after exposure to commercial dairy equipment sanitizers.

    Science.gov (United States)

    Huang, Kang; Goddard, Julie M

    2015-09-01

    Application of nonfouling coatings on thermal processing equipment can improve operational efficiency. However, to enable effective commercial translation, a need exists for more comprehensive studies on the stability of nonfouling coatings after exposure to different sanitizers. In the current study, the influence of different commercial dairy equipment sanitizers on the nonfouling properties of stainless steel modified with electroless Ni-polytetrafluoroethylene (PTFE) coatings was determined. Surface properties, such as dynamic contact angle, surface energy, surface morphology, and elemental composition, were measured before and after the coupons were exposed to the sanitizers for 168 cleaning cycles. The fouling behavior of Ni-PTFE-modified stainless steel coupons after exposure was also evaluated by processing raw milk on a self-fabricated benchtop-scale plate heat exchanger. The results indicated that peroxide sanitizer had only minor effect on the Ni-PTFE-modified stainless steel surface, whereas chlorine- and iodine-based sanitizers influenced the surface properties drastically. The coupons after 168 cycles of exposure to peroxide sanitizer accumulated the least amount of fouling material (4.44±0.24mg/cm(2)) compared with the coupons exposed to the other 3 sanitizers. These observations indicated that the Ni-PTFE nonfouling coating retained antifouling properties after 168 cycles of exposure to peroxide-based sanitizer, supporting their potential application as nonfouling coatings for stainless steel dairy processing equipment. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  12. Profile of Knowledge Management, Basic Sanitation and Attitudes towards Clean and Health Community in Kupang City

    Science.gov (United States)

    Nikmah; Ardi, Muhammad; Yahya, Mohamad; Upa, Muhamad D. Pua; Dirawan, Gufran Darma

    2017-01-01

    The objective of research is to describe the knowledge and attitude of basic sanitation management community in Kupang City. This type of research is a survey research using quantitative approach. Data were collected by using the instrument in the form of test knowledge of basic sanitation management and attitude questionnaire. The data was then…

  13. Water Supply and Sanitation in Mauritania : Turning Finance into Services for 2015 and Beyond

    OpenAIRE

    World Bank

    2011-01-01

    The situation within the water supply and sanitation (WSS) sector in Mauritania is somewhat contradictory: in spite of the weakness of the institutions in charge of the sector and the lack of financing for sanitation and, more recently, for the rural water supply (RWS) subsector, significant improvements have been made in the access rates since 1990. The institutional reform of the RWS sub...

  14. Sanitation services for the informal settlements of Cape Town, South Africa

    NARCIS (Netherlands)

    Mels, A.R.; Castellano, D.; Braadbaart, O.D.; Veenstra, S.; Dijkstra, I.; Meulman, B.; Singels, A.; Wilsenach, J.A.

    2009-01-01

    Sanitation coverage in the informal settlements of Cape Town is severely lagging behind. A recent inventory showed that the main barriers to the implementation of proper sanitation systems are unsuitability of the location of many settlements (more than 40% of the sites are located on private land,

  15. Benchmarking Local Government Performance on Rural Sanitation : Learning from Himachal Pradesh, India

    OpenAIRE

    World Bank

    2010-01-01

    Open defecation is a traditional behavior in rural India. Conventional rural sanitation programs have been based on the assumption that people defecate in the open because they are too poor to afford the cost of constructing a toilet. Therefore, subsidies for upfront capital costs were provided to generate demand for 'sanitation,' interpreted narrowly as a pour-flush toilet. These programs...

  16. 9 CFR 381.190 - Transactions in slaughtered poultry and other poultry products restricted; vehicle sanitation...

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Transactions in slaughtered poultry and other poultry products restricted; vehicle sanitation requirements. 381.190 Section 381.190... sanitation requirements. (a) No person shall sell, transport, offer for sale or transportation, or receive...

  17. 36 CFR 3.13 - What conditions apply to the use of Marine Sanitation Devices (MSD)?

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false What conditions apply to the use of Marine Sanitation Devices (MSD)? 3.13 Section 3.13 Parks, Forests, and Public Property NATIONAL... to the use of Marine Sanitation Devices (MSD)? (a) Discharging sewage from any vessel, whether...

  18. Strengthening the human right to sanitation as an instrument for inclusive development

    NARCIS (Netherlands)

    Obani, P.C.

    2018-01-01

    Over a third of the current 7.3 billion people worldwide are burdened with poor sanitation services. The resulting social, relational and ecological exclusion make the realisation of the human right to sanitation a critical concern development concern. However, the literature has evolved in a

  19. 9 CFR 354.210 - Minimum standards for sanitation, facilities, and operating procedures in official plants.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Minimum standards for sanitation, facilities, and operating procedures in official plants. 354.210 Section 354.210 Animals and Animal Products... sanitation, facilities, and operating procedures in official plants. The provisions of §§ 354.210 to 354.247...

  20. A Kinetic Study Using Evaporation of Different Types of Hand-Rub Sanitizers

    Science.gov (United States)

    Pinhas, Allan R.

    2010-01-01

    Alcohol-based hand-rub sanitizers are the types of products that hospital professionals use very often. These sanitizers can be classified into two major groups: those that contain a large quantity of thickener, and thus are a gel, and those that contain a small quantity of thickener, and thus remain a liquid. In an effort to create a laboratory…