WorldWideScience

Sample records for sandwich generation defined

  1. Sandwich-structured hollow fiber membranes for osmotic power generation

    KAUST Repository

    Fu, Feng Jiang

    2015-11-01

    In this work, a novel sandwich-structured hollow fiber membrane has been developed via a specially designed spinneret and optimized spinning conditions. With this specially designed spinneret, the outer layer, which is the most crucial part of the sandwich-structured membrane, is maintained the same as the traditional dual-layer membrane. The inner substrate layer is separated into two layers: (1) an ultra-thin middle layer comprising a high molecular weight polyvinylpyrrolidone (PVP) additive to enhance integration with the outer polybenzimidazole (PBI) selective layer, and (2) an inner-layer to provide strong mechanical strength for the membrane. Experimental results show that a high water permeability and good mechanical strength could be achieved without the expensive post treatment process to remove PVP which was necessary for the dual-layer pressure retarded osmosis (PRO) membranes. By optimizing the composition, the membrane shows a maximum power density of 6.23W/m2 at a hydraulic pressure of 22.0bar when 1M NaCl and 10mM NaCl are used as the draw and feed solutions, respectively. To our best knowledge, this is the best phase inversion hollow fiber membrane with an outer selective PBI layer for osmotic power generation. In addition, this is the first work that shows how to fabricate sandwich-structured hollow fiber membranes for various applications. © 2015 Elsevier B.V.

  2. Changing Welfare States and the “Sandwich Generation” : Increasing Burden for the Next Generation?

    Directory of Open Access Journals (Sweden)

    Harald Künemund

    2006-12-01

    Full Text Available The burden placed on individuals aged 40 to 59 – especially on women – by competing demands from work and both older and younger family members is often addressed using the metaphor of the „sandwich gen-eration“. Based on a systematization of the definitions used in the litera-ture, empirical evidence on the frequency of such generational constella-tions and on their impact on the well-being of sandwiched adults will be presented. Analysing the second wave of the German Aging Survey shows that being sandwicheddefined as a generational constellation – is very common, but simultaneous care activities for both older and younger family members are rare, especially in combination with labour force participation, and that life satisfaction is not systematically related to being sandwiched. Implications for further research and future devel-opments will be discussed, especially with respect to changes in family structure (e.g. the beanpole family and changes in the amount of welfare state spending for the aged.

  3. Viewpoints of working sandwich generation women and occupational therapists on role balance strategies.

    Science.gov (United States)

    Evans, Kiah L; Girdler, Sonya J; Falkmer, Torbjorn; Richmond, Janet E; Wagman, Petra; Millsteed, Jeannine; Falkmer, Marita

    2017-09-01

    Occupational therapists need to be cognizant of evidence-based role balance advice and strategies that women with multigenerational caring responsibilities can implement independently or with minimal assistance, as role balance may not be the primary goal during many encounters with this population. Hence, this study aimed to identify the viewpoints on the most helpful role balance strategies for working sandwich generation women, both from their own perspectives and from the perspective of occupational therapists. This was achieved through a Q methodology study, where 54 statements were based on findings from interviews, sandwich generation literature and occupational therapy literature. In total, 31 working sandwich generation women and 42 occupational therapists completed the Q sort through either online or paper administration. The data were analysed using factor analysis with varimax rotation and were interpreted through collaboration with experts in the field. The findings revealed similarities between working sandwich generation women and occupational therapists, particularly in terms of advocating strategies related to sleep, rest and seeking practical assistance from support networks. Differences were also present, with working sandwich generation women viewpoints tending to emphasize strategies related to coping with a busy lifestyle attending to multiple responsibilities. In contrast, occupational therapy viewpoints prioritized strategies related to the occupational therapy process, such as goal setting, activity focused interventions, monitoring progress and facilitating sustainable outcomes.

  4. Combining photocatalytic hydrogen generation and capsule storage in graphene based sandwich structures

    Science.gov (United States)

    Yang, Li; Li, Xiyu; Zhang, Guozhen; Cui, Peng; Wang, Xijun; Jiang, Xiang; Zhao, Jin; Luo, Yi; Jiang, Jun

    2017-07-01

    The challenge of safe hydrogen storage has limited the practical application of solar-driven photocatalytic water splitting. It is hard to isolate hydrogen from oxygen products during water splitting to avoid unwanted reverse reaction or explosion. Here we propose a multi-layer structure where a carbon nitride is sandwiched between two graphene sheets modified by different functional groups. First-principles simulations demonstrate that such a system can harvest light and deliver photo-generated holes to the outer graphene-based sheets for water splitting and proton generation. Driven by electrostatic attraction, protons penetrate through graphene to react with electrons on the inner carbon nitride to generate hydrogen molecule. The produced hydrogen is completely isolated and stored with a high-density level within the sandwich, as no molecules could migrate through graphene. The ability of integrating photocatalytic hydrogen generation and safe capsule storage has made the sandwich system an exciting candidate for realistic solar and hydrogen energy utilization.

  5. Defining the Growth/No-Growth Boundary for Listeria monocytogenes in Shelf Stable Pocket Sandwiches

    Science.gov (United States)

    2008-12-01

    conducted with Listeria monocytogenes, another pathogen of concern for ready-to-eat meat products , because it was not considered a hazard...lists the finished product pH and Aw. Code Honey Barbeque Beef Sandwich pH Aw BC Control No Omissions 4.77 0.90 Meat Filling No Glycerol, No Rice...ethyl alcohol. These findings are consistent with yeast spoilage of these products . Water activity and pH were measured starting during week 2

  6. Job Burnout and Couple Burnout in Dual-Earner Couples in the Sandwiched Generation

    Science.gov (United States)

    Pines, Ayala Malach; Neal, Margaret B.; Hammer, Leslie B.; Icekson, Tamar

    2011-01-01

    We use existential theory as a framework to explore the levels of and relationship between job and couple burnout reported by dual-earner couples in the "sandwich generation" (i.e., couples caring both for children and aging parents) in a sample of such couples in Israel and the United States. This comparison enables an examination of…

  7. Job Burnout and Couple Burnout in Dual-Earner Couples in the Sandwiched Generation

    Science.gov (United States)

    Pines, Ayala Malach; Neal, Margaret B.; Hammer, Leslie B.; Icekson, Tamar

    2011-01-01

    We use existential theory as a framework to explore the levels of and relationship between job and couple burnout reported by dual-earner couples in the "sandwich generation" (i.e., couples caring both for children and aging parents) in a sample of such couples in Israel and the United States. This comparison enables an examination of the…

  8. Investigating the Relationship Between Family Caregiving and Chronic Diseases Among Sandwich Generation Females

    Directory of Open Access Journals (Sweden)

    Zangeneh Pour Zadeh

    2016-10-01

    Full Text Available Background In the recent years, chronic diseases have been identified as challenges of public health and healthcare and are the major causes of death in the female population. Females make up 75% of family caregivers. The sandwich generation females, who care for their aging parents while supporting their own children, encounter an increase in stress related to chronic diseases, but in some studies, the issue of care involves lower depression risk and more constructive psychological effects. Objectives The aim of the present study was to investigate the relationship between family caregiving and chronic diseases in sandwich generation females. Patients and Methods This study was a case-control study in Ahvaz in which 360 females including 180 sandwich generation caregivers and 180 caregivers of one generation (i.e. those only taking care of their own child were selected using the random cluster sampling method during six months. The two groups of participants were matched in terms of age, number of children under their care and their socioeconomic status. Data analysis was conducted using the Kolmogorov-Smirnov (K-S test or KS test and chi-square tests through the SPSS v.22 software. Results A statistically significant difference was found between the two groups in terms of the presence of chronic diseases (P = 0.001. There was a significant correlation between chronic diseases and number of children (P = 0.03, person receiving care (P = 0.004, educational level (P = 0.001, caregiving duration (P = 0.005, and socioeconomic status (P = 0.14. Chronic diseases in caregivers with more than four children, under diploma educational level, and with unfavorable socioeconomic status were more than others. Additionally, the occurrence of chronic diseases was more in females caring for their grandchildren. There was no significant correlation between chronic diseases and the age of caregivers (P > 0.05. Conclusions The current study revealed that a

  9. Working Sandwich Generation Women Utilize Strategies within and between Roles to Achieve Role Balance.

    Science.gov (United States)

    Evans, Kiah L; Millsteed, Jeannine; Richmond, Janet E; Falkmer, Marita; Falkmer, Torbjorn; Girdler, Sonya J

    2016-01-01

    Increasingly, women simultaneously balance the roles of mother, parental carer and worker. However, individual role balance strategies among these working 'sandwich' generation women have not been thoroughly explored. Eighteen women combining these three roles were interviewed about their individual role balance strategies. Findings were identified through the framework analysis technique, underpinned by the Model of Juggling Occupations. Achieving and maintaining role balance was explained as a complex process accomplished through a range of strategies. Findings revealed the women used six within-role balance strategies: living with integrity, being the best you can, doing what you love, loving what you do, remembering why and searching for signs of success. The women also described six between-role balance strategies: maintaining health and wellbeing, repressing perfectionism, managing time and energy, releasing responsibility, nurturing social connection and reciprocating. These findings provide a basis for health care providers to understand and potentially support working 'sandwich' generation women.

  10. Thermoelectric generator sandwiched in a crossflow heat exchanger with optimal connectivity between modules

    Energy Technology Data Exchange (ETDEWEB)

    Belanger, Simon [Departement de genie mecanique, Universite Laval, 1065, avenue de la Medecine, Quebec City, QC, G1V 0A6 (Canada); Gosselin, Louis, E-mail: Louis.Gosselin@gmc.ulaval.ca [Departement de genie mecanique, Universite Laval, 1065, avenue de la Medecine, Quebec City, QC, G1V 0A6 (Canada)

    2011-08-15

    Highlights: {yields} In this paper, we propose a numerical model for a crossflow heat exchanger with a thermoelectric generator sandwiched in its wall. {yields} The number of thermoelectric modules and the electrical connections between them is optimized with a genetic algorithm. {yields} Complex electric current topologies are achieved in order to maximize the total power output. - Abstract: The design of a thermoelectric generator sandwiched in the wall of a crossflow heat exchanger was optimized. A numerical model has been developed and validated. The objective function was the total power output. The design variables were the number of modules and the current in each control volume of the mesh. We also optimize directly the electrical topology of the system. A genetic algorithm was used to perform the optimizations. Complex optimal electrical topologies were achieved due to the non-uniform temperatures distributions in the heat exchanger.

  11. Generation of quasi-monoenergetic carbon ions accelerated parallel to the plane of a sandwich target

    Energy Technology Data Exchange (ETDEWEB)

    Wang, J. W., E-mail: wang-jw@ile.osaka-u.ac.jp [Institute of Laser Engineering, Osaka University, Osaka 565-0871 (Japan); Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China); Murakami, M.; Weng, S. M. [Institute of Laser Engineering, Osaka University, Osaka 565-0871 (Japan); Xu, H. [National Laboratory for Parallel and Distributed Processing, School of Computer Science, National University of Defense Technology, Changsha 410073 (China); Ju, J. J.; Luan, S. X.; Yu, W. [Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China)

    2014-12-15

    A new ion acceleration scheme, namely, target parallel Coulomb acceleration, is proposed in which a carbon plate sandwiched between gold layers is irradiated with intense linearly polarized laser pulses. The high electrostatic field generated by the gold ions efficiently accelerates the embedded carbon ions parallel to the plane of the target. The ion beam is found to be collimated by the concave-shaped Coulomb potential. As a result, a quasi-monoenergetic and collimated C{sup 6+}-ion beam with an energy exceeding 10 MeV/nucleon is produced at a laser intensity of 5 × 10{sup 19} W/cm{sup 2}.

  12. Relation between Streaming Potential and Streaming Electrification Generated by Streaming of Water through a Sandwich-type Cell

    OpenAIRE

    Maruyama, Kazunori; NIKAIDO, Mitsuru; Hara, Yoshinori; Tanizaki, Yoshie

    2012-01-01

    Both streaming potential and accumulated charge of water flowed out were measured simultaneously using a sandwich-type cell. The voltages generated in divided sections along flow direction satisfied additivity. The sign of streaming potential agreed with that of streaming electrification. The relation between streaming potential and streaming electrification was explained from a viewpoint of electrical double layer in glass-water interface.

  13. Relation between Streaming Potential and Streaming Electrification Generated by Streaming of Water through a Sandwich-type Cell

    OpenAIRE

    Maruyama, Kazunori; NIKAIDO, Mitsuru; Hara, Yoshinori; Tanizaki, Yoshie

    2012-01-01

    Both streaming potential and accumulated charge of water flowed out were measured simultaneously using a sandwich-type cell. The voltages generated in divided sections along flow direction satisfied additivity. The sign of streaming potential agreed with that of streaming electrification. The relation between streaming potential and streaming electrification was explained from a viewpoint of electrical double layer in glass-water interface.

  14. Examining coping style and the relationship between stress and subjective well-being in Australia's 'sandwich generation'.

    Science.gov (United States)

    Gillett, Jade E; Crisp, Dimity A

    2017-06-02

    The sandwich generation represents adults, often in midlife, who care for both children and ageing parents/relatives. While the stress they experience has received some attention, little research has investigated the subjective well-being (SWB) of this population. This study examined the relationship between perceived stress and SWB and the moderating effect of coping style. Ninety-three participants (80 women), aged 23-63 years, completed an online survey measuring perceived stress, coping strategies, life satisfaction and positive and negative affect. Stress was negatively associated with SWB. While emotion- and problem-focused coping were directly associated with SWB outcomes, the only moderating effect found was for avoidance-focused coping (AFC). Specifically, AFC was associated with higher positive affect for those reporting lower stress. This study highlights the need to recognise the distinct circumstances that exist for the sandwich generation. Limitations and suggestions for future research are discussed. © 2017 AJA Inc.

  15. Defining the boundaries of normal thrombin generation: investigations into hemostasis.

    Directory of Open Access Journals (Sweden)

    Christopher M Danforth

    Full Text Available In terms of its soluble precursors, the coagulation proteome varies quantitatively among apparently healthy individuals. The significance of this variability remains obscure, in part because it is the backdrop against which the hemostatic consequences of more dramatic composition differences are studied. In this study we have defined the consequences of normal range variation of components of the coagulation proteome by using a mechanism-based computational approach that translates coagulation factor concentration data into a representation of an individual's thrombin generation potential. A novel graphical method is used to integrate standard measures that characterize thrombin generation in both empirical and computational models (e.g max rate, max level, total thrombin, time to 2 nM thrombin ("clot time" to visualize how normal range variation in coagulation factors results in unique thrombin generation phenotypes. Unique ensembles of the 8 coagulation factors encompassing the limits of normal range variation were used as initial conditions for the computational modeling, each ensemble representing "an individual" in a theoretical healthy population. These "individuals" with unremarkable proteome composition was then compared to actual normal and "abnormal" individuals, i.e. factor ensembles measured in apparently healthy individuals, actual coagulopathic individuals or artificially constructed factor ensembles representing individuals with specific factor deficiencies. A sensitivity analysis was performed to rank either individual factors or all possible pairs of factors in terms of their contribution to the overall distribution of thrombin generation phenotypes. Key findings of these analyses include: normal range variation of coagulation factors yields thrombin generation phenotypes indistinguishable from individuals with some, but not all, coagulopathies examined; coordinate variation of certain pairs of factors within their normal ranges

  16. Next generation sequencing data of a defined microbial mock community

    Science.gov (United States)

    Singer, Esther; Andreopoulos, Bill; Bowers, Robert M.; Lee, Janey; Deshpande, Shweta; Chiniquy, Jennifer; Ciobanu, Doina; Klenk, Hans-Peter; Zane, Matthew; Daum, Christopher; Clum, Alicia; Cheng, Jan-Fang; Copeland, Alex; Woyke, Tanja

    2016-01-01

    Generating sequence data of a defined community composed of organisms with complete reference genomes is indispensable for the benchmarking of new genome sequence analysis methods, including assembly and binning tools. Moreover the validation of new sequencing library protocols and platforms to assess critical components such as sequencing errors and biases relies on such datasets. We here report the next generation metagenomic sequence data of a defined mock community (Mock Bacteria ARchaea Community; MBARC-26), composed of 23 bacterial and 3 archaeal strains with finished genomes. These strains span 10 phyla and 14 classes, a range of GC contents, genome sizes, repeat content and encompass a diverse abundance profile. Short read Illumina and long-read PacBio SMRT sequences of this mock community are described. These data represent a valuable resource for the scientific community, enabling extensive benchmarking and comparative evaluation of bioinformatics tools without the need to simulate data. As such, these data can aid in improving our current sequence data analysis toolkit and spur interest in the development of new tools. PMID:27673566

  17. Developing a Theoretical Framework Using a Nursing Perspective to Investigate Perceived Health in the "Sandwich Generation" Group.

    Science.gov (United States)

    Oulevey Bachmann, Annie; Danuser, Brigitta; Morin, Diane

    2015-10-01

    Coexisting workloads from professional, household and family, and caregiving activities for frail parents expose middle-aged individuals, the so-called "Sandwich Generation", to potential health risks. Current trends suggest that this situation will continue or increase. Thus SG health promotion has become a nursing concern. Most existing research considers coexisting workloads a priori pathogenic. Most studies have examined the association of one, versus two, of these three activities with health. Few studies have used a nursing perspective. This article presents the development of a framework based on a nursing model. We integrated Siegrist's Effort-Reward Imbalance middle-range theory into "Neuman Systems Model". The latter was chosen for its salutogenic orientation, its attention to preventive nursing interventions and the opportunity it provides to simultaneously consider positive and negative perceptions of SG health and SG coexisting workloads. Finally, it facilitated a theoretical identification of health protective factors.

  18. Software Defined Radio Architecture Contributions to Next Generation Space Communications

    Science.gov (United States)

    Kacpura, Thomas J.; Eddy, Wesley M.; Smith, Carl R.; Liebetreu, John

    2015-01-01

    systems, as well as those communications and navigation systems operated by international space agencies and civilian and government agencies. In this paper, we review the philosophies, technologies, architectural attributes, mission services, and communications capabilities that form the structure of candidate next-generation integrated communication architectures for space communications and navigation. A key area that this paper explores is from the development and operation of the software defined radio for the NASA Space Communications and Navigation (SCaN) Testbed currently on the International Space Station (ISS). Evaluating the lessons learned from development and operation feed back into the communications architecture. Leveraging the reconfigurability provides a change in the way that operations are done and must be considered. Quantifying the impact on the NASA Space Telecommunications Radio System (STRS) software defined radio architecture provides feedback to keep the standard useful and up to date. NASA is not the only customer of these radios. Software defined radios are developed for other applications, and taking advantage of these developments promotes an architecture that is cost effective and sustainable. Developments in the following areas such as an updated operating environment, higher data rates, networking and security can be leveraged. The ability to sustain an architecture that uses radios for multiple markets can lower costs and keep new technology infused.

  19. Defining next-generation products: an inside look.

    Science.gov (United States)

    Tabrizi, B; Walleigh, R

    1997-01-01

    The continued success of technology-based companies depends on their proficiency in creating next-generation products and their derivatives. So getting such products out the door on schedule must be routine for such companies, right? Not quite. The authors recently engaged in a detailed study--in which they had access to sensitive internal information and to candid interviews with people at every level--of 28 next-generation product-development projects in 14 leading high-tech companies. They found that most of the companies were unable to complete such projects on schedule. And the companies also had difficulty developing the derivative products needed to fill the gaps in the market that their next-generation products would create. The problem in every case, the authors discovered, was rooted in the product definition phase. And not coincidentally, the successful companies in the study had all learned how to handle the technical and marketplace uncertainties in their product definition processes. The authors have discerned from the actions of those companies a set of best practices that can measurably improve the definition phase of any company's product-development process. They have grouped the techniques into three categories and carefully lay out the steps that companies need to take as they work through each stage. The best practices revealed here are not a magic formula for rapid, successful new-product definition. But they can help companies capture new markets without major delays. And that is good news for any manager facing the uncertainty that goes with developing products for a global marketplace.

  20. Sandwich Panels

    Directory of Open Access Journals (Sweden)

    N. Ramachandran

    1963-05-01

    Full Text Available This introductory article give an insight into the different methods employed in the construction of Sandwich panels, their limitations and future design application for defence use as a structural element with one of the highest strength-weight ratios yet devised.

  1. State recognition of the viscoelastic sandwich structure based on the adaptive redundant second generation wavelet packet transform, permutation entropy and the wavelet support vector machine

    Science.gov (United States)

    Qu, Jinxiu; Zhang, Zhousuo; Wen, Jinpeng; Guo, Ting; Luo, Xue; Sun, Chuang; Li, Bing

    2014-08-01

    The viscoelastic sandwich structure is widely used in mechanical equipment, yet the structure always suffers from damage during long-term service. Therefore, state recognition of the viscoelastic sandwich structure is very necessary for monitoring structural health states and keeping the equipment running with high reliability. Through the analysis of vibration response signals, this paper presents a novel method for this task based on the adaptive redundant second generation wavelet packet transform (ARSGWPT), permutation entropy (PE) and the wavelet support vector machine (WSVM). In order to tackle the non-linearity existing in the structure vibration response, the PE is introduced to reveal the state changes of the structure. In the case of complex non-stationary vibration response signals, in order to obtain more effective information regarding the structural health states, the ARSGWPT, which can adaptively match the characteristics of a given signal, is proposed to process the vibration response signals, and then multiple PE features are extracted from the resultant wavelet packet coefficients. The WSVM, which can benefit from the conventional SVM as well as wavelet theory, is applied to classify the various structural states automatically. In this study, to achieve accurate and automated state recognition, the ARSGWPT, PE and WSVM are combined for signal processing, feature extraction and state classification, respectively. To demonstrate the effectiveness of the proposed method, a typical viscoelastic sandwich structure is designed, and the different degrees of preload on the structure are used to characterize the various looseness states. The test results show that the proposed method can reliably recognize the different looseness states of the viscoelastic sandwich structure, and the WSVM can achieve a better classification performance than the conventional SVM. Moreover, the superiority of the proposed ARSGWPT in processing the complex vibration response

  2. Sandwich construction

    Science.gov (United States)

    Marshall, A.

    A form of composites known as structural sandwich construction is presented in terms of materials used, design details for solving edging and attachment problems, and charts of design material analysis. Sandwich construction is used in nearly all commercial airliners and helicopters, and military air and space vehicles, and it is shown that this method can stiffen a structure without causing a weight increase. The facing material can be made of 2024 or 7075 aluminum alloy, titanium, or stainless steel, and the core material can be wood or foam. The properties of paper honeycomb and various aluminum alloy honeycombs are presented. Factors pertaining to adhesive materials are discussed, including products given off during cure, bonding pressure, and adaptability. Design requirements and manufacturing specifications are resolved using numerous suggestions.

  3. Chiral Sulfur Functional Groups as Definers of the Chirality at the Metal in Ir- and Rh-Half Sandwich Complexes: A Combined CD-X-ray Study.

    Science.gov (United States)

    Sierra, Miguel A; de la Torre, Maria C; Fernandez de la Pradilla, Roberto; Viso, Alma; Frutos, Maria; Avello, Marta G; Velado, Marina; Gornitzka, Heinz; Hemmert, Catherine

    2017-07-27

    Mesoionic carbenes (MIC) derived from triazolium salts containing chiral sulfoxide or sulfoximine functional groups lead to enantiopure chiral-at-metal Ir(III) and Rh(III) half-sandwich complexes, through the sequence MIC complexation-C-H aromatic activation. The process is efficient and totally diastereoselective in the formation of enantiopure five membered metallacycles. The use of the enantiomers of the sulfur chiral groups allows to prepare complexes having opposite configurations at the metal. Complete retention of the configuration at the metal center is observed during the formation of cationic Ir(III) complexes and upon insertion of alkynes into the Ir(III)-C bond, as demonstrated by a combined Circular Dichroism (CD)-X-ray study. These results point to vicinal assisted SN-like processes. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Sensitive Glycoprotein Sandwich Assays by the Synergistic Effect of In Situ Generation of Raman Probes and Plasmonic Coupling of Ag Core-Au Satellite Nanostructures.

    Science.gov (United States)

    Bi, Xiaoshuang; Li, Xueyuan; Chen, Dong; Du, Xuezhong

    2016-05-01

    Sensitive surface-enhanced Raman scattering (SERS) assays of glycoproteins have been proposed using p-aminothiophenol (PATP)-embedded Ag core-Au satellite nanostructures modified with p-mercaptophenylboronic acid (PMBA) and the self-assembled monolayer of PMBA on a smooth gold-coated wafer. The apparent Raman probe PATP on the surfaces of the Ag cores underwent a photodimerization to generate 4,4'-dimercaptoazobenzene (DMAB) in situ upon excitation of laser, and the in situ generated DMAB acted as the actual Raman probe with considerably strong SERS signals, which was further enhanced by the plasmonic coupling of the Ag core-Au satellite nanostructures due to the synergistic effect. The sandwich assays of glycoproteins showed high sensitivity and excellent selectivity against nonglycoproteins. The Ag core-Au satellite SERS nanostructures can be used for highly sensitive SERS assays of other analytes.

  5. Solar hydrogen generation by a CdS-Au-TiO2 sandwich nanorod array enhanced with Au nanoparticle as electron relay and plasmonic photosensitizer.

    Science.gov (United States)

    Li, Jiangtian; Cushing, Scott K; Zheng, Peng; Senty, Tess; Meng, Fanke; Bristow, Alan D; Manivannan, Ayyakkannu; Wu, Nianqiang

    2014-06-11

    This paper presents a sandwich-structured CdS-Au-TiO2 nanorod array as the photoanode in a photoelectrochemical cell (PEC) for hydrogen generation via splitting water. The gold nanoparticles sandwiched between the TiO2 nanorod and the CdS quantum dot (QD) layer play a dual role in enhancing the solar-to-chemical energy conversion efficiency. First, the Au nanoparticles serve as an electron relay, which facilitates the charge transfer between CdS and TiO2 when the CdS QDs are photoexcited by wavelengths shorter than 525 nm. Second, the Au nanoparticles act as a plasmonic photosensitizer, which enables the solar-to-hydrogen conversion at wavelengths longer than the band edge of CdS, extending the photoconversion wavelength from 525 to 725 nm. The dual role of Au leads to a photocurrent of 4.07 mA/cm(2) at 0 V (vs Ag|AgCl) under full solar spectrum irradiation and a maximum solar-to-chemical energy conversion efficiency of 2.8%. An inversion analysis is applied to the transient absorption spectroscopy data, tracking the transfer of electrons and holes in the heterostructure, relating the relaxation dynamics to the underlying coupled rate equation and revealing that trap-state Auger recombination is a dominant factor in interfacial charge transfer. It is found that addition of Au nanoparticles increases the charge-transfer lifetime, reduces the trap-state Auger rate, suppresses the long-time scale back transfer, and partially compensates the negative effects of the surface trap states. Finally, the plasmonic energy-transfer mechanism is identified as direct transfer of the plasmonic hot carriers, and the interfacial Schottky barrier height is shown to modulate the plasmonic hot electron transfer and back transfer. Transient absorption characterization of the charge transfer shows defect states cannot be ignored when designing QD-sensitized solar cells. This facile sandwich structure combines both the electrical and the optical functions of Au nanoparticles into a

  6. Defining and Generating Axial Lines from Street Center Lines for better Understanding of Urban Morphologies

    CERN Document Server

    Liu, Xintao

    2010-01-01

    Axial lines are defined as the longest visibility lines for representing individual linear spaces in urban environments. The least number of axial lines that cover the free space of an urban environment constitute what is often called an axial map. This is a fundamental tool in space syntax, a theory developed by Bill Hillier and his colleagues for characterizing the underlying urban morphologies. For a long time, generating axial lines with help of some graphic software has been a tedious manual process that is criticized for being time consuming, subjective, or even arbitrary. In this paper, we redefine axial lines as the least number of individual straight line segments mutually intersected along natural streets that are generated from street center lines using the Gestalt principle of good continuity. Based on this new definition, we develop an automatic solution to generating the newly defined axial lines from street center lines. We apply this solution to six typical street networks (three from North Am...

  7. The asymmetric sandwich theorem

    CERN Document Server

    Simons, Stephen

    2011-01-01

    We discuss the asymmetric sandwich theorem, a generalization of the Hahn-Banach theorem. As applications, we derive various results on the existence of linear functionals that include bivariate, trivariate and quadrivariate generalizations of the Fenchel duality theorem. Most of the results are about affine functions defined on convex subsets of vector spaces, rather than linear functions defined on vector spaces. We consider both results that use a simple boundedness hypothesis (as in Rockafellar's version of the Fenchel duality theorem) and also results that use Baire's theorem (as in the Robinson-Attouch-Brezis version of the Fenchel duality theorem). This paper also contains some new results about metrizable topological vector spaces that are not necessarily locally convex.

  8. Sandwich DIY

    Institute of Scientific and Technical Information of China (English)

    肖蕾

    2006-01-01

    我们都知道sandwich是一种方便食品,就是在两片面包中加上一些肉和蔬菜。Sandwich这个名字来源于英国的一位桑威治伯爵(Earl of Sandwich)。据说这位伯爵嗜赌如命,就是到吃饭的时候也不愿停下来。于是他就叫侍者把肉、蛋、菜夹在面包片中,让他拿在手上边赌边吃。后来人们就把这种夹馅面包叫做sandwich。现在sandwich已成为风靡世界的快餐食品(snack)了。Sandwich的做法其实很简单。如果你有两片面包,你几乎可以在这两片面包之间夹上任何食物来给自己做一个三明治。下面就让我们试一试,做一个三明治来吃。第一步:在一片面包上抹上黄油(butter)或植物黄油,在另一片面包上抹上蛋黄酱(mayonnaise)和芥末酱(mustard)。喜欢吃番茄酱(catsup)也可以放番茄酱!第二步:把花生酱(peanut butter)或者乳酪片(cream)、熟肉片放在涂了黄油的面包片上。想吃什么肉就放什么肉,香肠也可以!第三步:在乳酪上面放酸黄瓜片、番茄片和生菜。也可以根据个人的口味再放些乳酪、芥末酱和(或)番茄酱、洋葱、辣椒、盐、黑胡椒和醋。第四步:将第二片面包盖在上面,就做成了一个sand...

  9. Generating anagrams from multiple core strings employing user-defined vocabularies and orthographic parameters.

    Science.gov (United States)

    Jordan, Timothy R; Monteiro, Axel

    2003-02-01

    Anagrams are used widely in psychological research. However, generating a range of strings with the same letter content is an inherently difficult and time-consuming task for humans, and current computer-based anagram generators do not provide the controls necessary for psychological research. In this article, we present a computational algorithm that overcomes these problems. Specifically, the algorithm processes automatically each word in a user-defined source vocabulary and outputs, for each word, all possible anagrams that exist as words (or as nonwords, if required) as defined by the same source vocabulary. Moreover, we show how the output of the algorithm can be filtered to produce anagrams within specific user-defined orthographic parameters. For example, the anagrams produced can be filtered to produce words that share, with each other or with other words in the source vocabulary, letters in only certain positions. Finally, we provide free access to the complete Windows-based program and source code containing these facilities for anagram generation.

  10. Efficient generation of functional dopaminergic neurons from human induced pluripotent stem cells under defined conditions.

    Science.gov (United States)

    Swistowski, Andrzej; Peng, Jun; Liu, Qiuyue; Mali, Prashant; Rao, Mahendra S; Cheng, Linzhao; Zeng, Xianmin

    2010-10-01

    Human induced pluripotent stem cells (iPSCs) reprogrammed from somatic cells represent a promising unlimited cell source for generating patient-specific cells for biomedical research and personalized medicine. As a first step, critical to clinical applications, we attempted to develop defined culture conditions to expand and differentiate human iPSCs into functional progeny such as dopaminergic neurons for treating or modeling Parkinson's disease (PD). We used a completely defined (xeno-free) system that we previously developed for efficient generation of authentic dopaminergic neurons from human embryonic stem cells (hESCs), and applied it to iPSCs. First, we adapted two human iPSC lines derived from different somatic cell types for the defined expansion medium and showed that the iPSCs grew similarly as hESCs in the same medium regarding pluripotency and genomic stability. Second, by using these two independent adapted iPSC lines, we showed that the process of differentiation into committed neural stem cells (NSCs) and subsequently into dopaminergic neurons was also similar to hESCs. Importantly, iPSC-derived dopaminergic neurons were functional as they survived and improved behavioral deficits in 6-hydroxydopamine-leasioned rats after transplantation. In addition, iPSC-derived NSCs and neurons could be efficiently transduced by a baculoviral vector delivering episomal DNA for future gene function study and disease modeling using iPSCs. We also performed genome-wide microarray comparisons between iPSCs and hESCs, and we derived NSC and dopaminergic neurons. Our data revealed overall similarity and visible differences at a molecular level. Efficient generation of functional dopaminergic neurons under defined conditions will facilitate research and applications using PD patient-specific iPSCs.

  11. A hydrophilic inorganic framework based on a sandwich polyoxometalate: unusual chemoselectivity for aldehydes/ketones with in situ generated hydroxylamine.

    Science.gov (United States)

    Xing, Songzhu; Han, Qiuxia; Shi, Zhuolin; Wang, Shugai; Yang, PeiPei; Wu, Qiang; Li, Mingxue

    2017-08-16

    A hydrophilic inorganic porous catalyst was prepared via the hydrothermal method. The combination of [WZn3(H2O)2(ZnW9O34)2](12-) and Co(ii) provides a synergistical catalytic way to promote oximation of aldehyde/ketone with in situ generated hydroxylamine that initially produces an oxime, which further either dehydrates into a nitrile or undergoes a Beckmann rearrangement to form an amide.

  12. The sandwich sign

    Directory of Open Access Journals (Sweden)

    Nasreen Mahomed

    2012-09-01

    Full Text Available The sandwich sign refers to the sandwiching of mesenteric vessels and fat by enlarged mesenteric nodes on cross-sectional imaging, commonly occurring in lymphoma, but not specific to lymphoma. The sign is radiologically indistinguishable from post-transplant lymphoproliferative disorders. The radiological significance of the sandwich sign is in suggesting the diagnosis of lymphoma so that appropriate treatment may be initiated early as the tumour has a rapid growth pattern.

  13. Generation of functional inhibitory synapses incorporating defined combinations of GABA(A or glycine receptor subunits

    Directory of Open Access Journals (Sweden)

    Christine Laura Dixon

    2015-12-01

    Full Text Available Fast inhibitory neurotransmission in the brain is mediated by wide range of GABAA receptor (GABAAR and glycine receptor (GlyR isoforms, each with different physiological and pharmacological properties. Because multiple isoforms are expressed simultaneously in most neurons, it is difficult to define the properties of inhibitory postsynaptic currents mediated by individual isoforms in vivo. Although recombinant expression systems permit the expression of individual isoforms in isolation, they require exogenous agonist application which cannot mimic the dynamic neurotransmitter profile characteristic of native synapses. We describe a neuron-HEK293 cell co-culture technique for generating inhibitory synapses incorporating defined combinations of GABAAR or GlyR subunits. Primary neuronal cultures, prepared from embryonic rat cerebral cortex or spinal cord, are used to provide presynaptic GABAergic and glycinergic terminals, respectively. When the cultures are mature, HEK293 cells expressing the subunits of interest plus neuroligin 2A are plated onto the neurons, which rapidly form synapses onto HEK293 cells. Patch clamp electrophysiology is then used to analyze the physiological and pharmacological properties of the inhibitory postsynaptic currents mediated by the recombinant receptors. The method is suitable for investigating the kinetic properties or the effects of drugs on inhibitory postsynaptic currents mediated by defined GABAAR or GlyR isoforms of interest, the effects of hereditary disease mutations on the formation and function of both types of synapses, and synaptogenesis and synaptic clustering mechanisms. The entire cell preparation procedure takes 2 – 5 weeks.

  14. Generation of induced pluripotent stem cells from buffalo (Bubalus bubalis) fetal fibroblasts with buffalo defined factors.

    Science.gov (United States)

    Deng, Yanfei; Liu, Qingyou; Luo, Chan; Chen, Shibei; Li, Xiangping; Wang, Caizhu; Liu, Zhenzhen; Lei, Xiaocan; Zhang, Huina; Sun, Hongliang; Lu, Fenghua; Jiang, Jianrong; Shi, Deshun

    2012-09-01

    Ectopically, expression of defined factors could reprogram mammalian somatic cells into induced pluripotent stem cells (iPSCs), which initiates a new strategy to obtain pluripotent stem cell lines. Attempts have been made to generate buffalo pluripotent stem cells by culturing primary germ cells or inner cell mass, but the efficiency is extremely low. Here, we report a successful method to reprogram buffalo fetal fibroblasts (BFFs) into pluripotent stem cells [buffalo induced pluripotent stem cell (biPSCs)] by transduction of buffalo defined factors (Oct4, Sox2, Klf4, and c-Myc) using retroviral vectors. The established biPSCs displayed typical morphological characteristics of pluripotent stem cells, normal karyotype, positive staining of alkaline phosphatase, and expressed pluripotent markers including Oct4, Sox2, Nanog, Lin28, E-Cadherin, SSEA-1, SSEA-4, TRA-1-81, STAT3, and FOXD3. They could form embryoid bodies (EBs) in vitro and teratomas after injecting into the nude BALB/C mice, and 3 germ layers were identified in the EBs and teratomas. Methylation assay revealed that the promoters of Oct4 and Nanog were hypomethylated in biPSCs compared with BFFs and pre-biPSCs, while the promoters of Sox2 and E-Cadherin were hypomethylated in both BFFs and biPSCs. Further, inhibiting p53 expression by coexpression of SV40 large T antigen and buffalo defined factors in BFFs or treating BFFs with p53 inhibitor pifithrin-a (PFT) could increase the efficiency of biPSCs generation up to 3-fold, and nuclear transfer embryos reconstructed with biPSCs could develop to blastocysts. These results indicate that BFFs can be reprogrammed into biPSCs by buffalo defined factors, and the generation efficiency of biPSCs can be increased by inhibition of p53 expression. These efforts will provide a feasible approach for investigating buffalo stem cell signal pathways, establishing buffalo stem cell lines, and producing genetic modification buffaloes in the future.

  15. Evolution of a Reconfigurable Processing Platform for a Next Generation Space Software Defined Radio

    Science.gov (United States)

    Kacpura, Thomas J.; Downey, Joseph A.; Anderson, Keffery R.; Baldwin, Keith

    2014-01-01

    The National Aeronautics and Space Administration (NASA)Harris Ka-Band Software Defined Radio (SDR) is the first, fully reprogrammable space-qualified SDR operating in the Ka-Band frequency range. Providing exceptionally higher data communication rates than previously possible, this SDR offers in-orbit reconfiguration, multi-waveform operation, and fast deployment due to its highly modular hardware and software architecture. Currently in operation on the International Space Station (ISS), this new paradigm of reconfigurable technology is enabling experimenters to investigate navigation and networking in the space environment.The modular SDR and the NASA developed Space Telecommunications Radio System (STRS) architecture standard are the basis for Harris reusable, digital signal processing space platform trademarked as AppSTAR. As a result, two new space radio products are a synthetic aperture radar payload and an Automatic Detection Surveillance Broadcast (ADS-B) receiver. In addition, Harris is currently developing many new products similar to the Ka-Band software defined radio for other applications. For NASAs next generation flight Ka-Band radio development, leveraging these advancements could lead to a more robust and more capable software defined radio.The space environment has special considerations different from terrestrial applications that must be considered for any system operated in space. Each space mission has unique requirements that can make these systems unique. These unique requirements can make products that are expensive and limited in reuse. Space systems put a premium on size, weight and power. A key trade is the amount of reconfigurability in a space system. The more reconfigurable the hardware platform, the easier it is to adapt to the platform to the next mission, and this reduces the amount of non-recurring engineering costs. However, the more reconfigurable platforms often use more spacecraft resources. Software has similar considerations

  16. Thermolysis of Half-Sandwich Vanadium(V) Imido Complexes to Generate Vanadium(III) Imido Species via a Vanadium(IV) Intermediate

    NARCIS (Netherlands)

    Batinas, Aurora A.; Dam, Jeroen; Meetsma, Auke; Hessen, Bart; Bouwkamp, Marco W.

    2010-01-01

    Thermolysis of half-sandwich vanadium imido complexes Cp(RN)V(i-Pr(2)N)Me (R = p-Tol, 1a; R = t-Bu, 1b) results in a mixture of products, including vanadium(IV) dimers [CpVMe](2)(mu-RN)(2), i-Pr(2)NH, i-PrNCMe(2), CH(4), and one or more paramagnetic species. In the presence of dmpe (dmpe =

  17. Sandwich classification theorem

    Directory of Open Access Journals (Sweden)

    Alexey Stepanov

    2015-09-01

    Full Text Available The present note arises from the author's talk at the conference ``Ischia Group Theory 2014''. For subgroups FleN of a group G denote by Lat(F,N the set of all subgroups of N , containing F . Let D be a subgroup of G . In this note we study the lattice LL=Lat(D,G and the lattice LL ′ of subgroups of G , normalized by D . We say that LL satisfies sandwich classification theorem if LL splits into a disjoint union of sandwiches Lat(F,N G (F over all subgroups F such that the normal closure of D in F coincides with F . Here N G (F denotes the normalizer of F in G . A similar notion of sandwich classification is introduced for the lattice LL ′ . If D is perfect, i.,e. coincides with its commutator subgroup, then it turns out that sandwich classification theorem for LL and LL ′ are equivalent. We also show how to find basic subroup F of sandwiches for LL ′ and review sandwich classification theorems in algebraic groups over rings.

  18. Proof of the Thin Sandwich Conjecture

    CERN Document Server

    Bartnik, R; Bartnik, Robert; Fodor, Gyula

    1993-01-01

    We prove that the Thin Sandwich Conjecture in general relativity is valid, provided that the data $(g_{ab},\\dot g_{ab})$ satisfy certain geometric conditions. These conditions define an open set in the class of possible data, but are not generically satisfied. The implications for the ``superspace'' picture of the Einstein evolution equations are discussed.

  19. The Planar Sandwich and Other 1D Planar Heat Flow Test Problems in ExactPack

    Energy Technology Data Exchange (ETDEWEB)

    Singleton, Jr., Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-24

    This report documents the implementation of several related 1D heat flow problems in the verification package ExactPack [1]. In particular, the planar sandwich class defined in Ref. [2], as well as the classes PlanarSandwichHot, PlanarSandwichHalf, and other generalizations of the planar sandwich problem, are defined and documented here. A rather general treatment of 1D heat flow is presented, whose main results have been implemented in the class Rod1D. All planar sandwich classes are derived from the parent class Rod1D.

  20. OPTIMAL DESIGN OF QUADRATIC SANDWICH PLATE

    Directory of Open Access Journals (Sweden)

    TIMAR Dr. Imre

    2016-05-01

    Full Text Available In this paper, we show the optimal design of the three-layered sandwich plates. The objective function contains the material and fabrication costs. The design constraints are the maximal stresses, the deflection of plates and damping of vibrations. The unknown is the thickness of the filling foam. By the mathematical method, we define the minima of the cost function and the optimal thickness of the filling layer of foam. The active constraint is the deflection, so we calculate of the costs of the sandwich plate with the homogeneous plate.

  1. Predicting safe sandwich production

    DEFF Research Database (Denmark)

    Birk, Tina; Duan, Zhi; Møller, Cleide Oliveira de Almeida

    2014-01-01

    and serving. However, Danish sandwich producing companies find it challenging to comply with this and have expressed a need for more flexibility. The Danish guidelines do allow for a prolongation of the acceptable time outside the cold chain, if the safety of the specific production can be documented....... There is, therefore, room for developing targeted tools for evaluating the time-temperature scenarios in sandwich production. This study describes a decision support tool developed to offer the producers more flexibility. Based on time/temperature measurements obtained during preparation combined......Time and temperature control is crucial to avoid growth of pathogens during production and serving of cold ready-to-eat meals. The Danish guidelines state that chilled foods, such as sandwiches, should not be outside the cold chain for more than 3 hours including the time for preparation...

  2. Controlled Covalent Functionalization of Thermally Reduced Graphene Oxide To Generate Defined Bifunctional 2D Nanomaterials

    Science.gov (United States)

    Faghani, Abbas; Donskyi, Ievgen S.; Fardin Gholami, Mohammad; Ziem, Benjamin; Lippitz, Andreas; Unger, Wolfgang E. S.; Böttcher, Christoph; Rabe, Jürgen P.

    2017-01-01

    Abstract A controlled, reproducible, gram‐scale method is reported for the covalent functionalization of graphene sheets by a one‐pot nitrene [2+1] cycloaddition reaction under mild conditions. The reaction between commercially available 2,4,6‐trichloro‐1,3,5‐triazine and sodium azide with thermally reduced graphene oxide (TRGO) results in defined dichlorotriazine‐functionalized sheets. The different reactivities of the chlorine substituents on the functionalized graphene allow stepwise post‐modification by manipulating the temperature. This new method provides unique access to defined bifunctional 2D nanomaterials, as exemplified by chiral surfaces and multifunctional hybrid architectures. PMID:28165179

  3. On Sandwiched Singularities

    OpenAIRE

    Möhring, Konrad

    2004-01-01

    Sandwich-Singularitäten sind die Singularitäten auf derNormalisierung von Aufblasungen eines regulärenFlächenkeimes. In der Arbeit wird ein enger Zusammenhangzwischen Topologie und Deformationstheorie vonSandwich-Singularitäten einerseits und ebenenKurvensingularitäten andererseits dargestellt. NeueErgebnisse betreffen u.a. Deformationen vonnulldimensionalen komplexen Räumen in der Ebene, die durchvollständige Ideale beschrieben werden, z.B. wann'simultanes Aufblasen' der Fasern einer solchen...

  4. A multifunctional heat pipe sandwich panel structure

    Energy Technology Data Exchange (ETDEWEB)

    Queheillalt, Douglas T.; Wadley, Haydn N.G. [University of Virginia, Department of Materials Science and Engineering, 140 Chemistry Way, P.O. Box 400745, Charlottesville, VA 22904 (United States); Carbajal, Gerardo [University of Turabo, School of Engineering, P.O. Box 3030, Gurabo 00778 (Puerto Rico); Peterson, G.P. [University of Colorado at Boulder, 914 Broadway, Boulder, CO 80309 (United States)

    2008-01-15

    A multifunctional sandwich panel combining efficient structural load support and thermal management characteristics has been designed and experimentally assessed. The concept is based upon a truncated, square honeycomb sandwich structure. In closed cell honeycomb structures, the transport of heat from one face to the other occurs by a combination of conduction through the webs and convection/radiation within the cells. Here, much more effective heat transport is achieved by multifunctionally utilizing the core as a heat pipe sandwich panel. Its interior consists of a 6061 aluminum truncated-square honeycomb core covered with a stochastic open-cell nickel foam wick. An electroless nickel plating barrier layer inhibited the chemical reaction between the deionized water working fluid and the aluminum structure, retarding the generation of non-condensable hydrogen gas. A thermodynamic model was used to guide the design of the heat pipe sandwich panel. We describe the results of a series of experiments that validate the operational principle of the multifunctional heat pipe sandwich panel and characterize its transient response to an intense localized heat source. The systems measured thermal response to a localized heat source agrees well with that predicted by a finite difference method model used to predict the thermal response. (author)

  5. Sandwich Panels Evaluated With Ultrasonic Spectroscopy

    Science.gov (United States)

    Cosgriff, Laura M.

    2004-01-01

    Enhanced, lightweight material systems, such as 17-4PH stainless steel sandwich panels are being developed for use as fan blades and fan containment systems for next-generation engines. The bond strength between the core and face sheets is critical in maintaining the structural integrity of the sandwich structure. To improve the inspection and production of these systems, researchers at the NASA Glenn Research Center are using nondestructive evaluation (NDE) techniques, such as ultrasonic spectroscopy, to evaluate the brazing quality between the face plates and the metallic foam core. The capabilities and limitations of a swept-frequency approach to ultrasonic spectroscopy were evaluated with respect to these sandwich structures. This report discusses results from three regions of a sandwich panel representing different levels of brazing quality between the outer face plates and a metallic foam core. Each region was investigated with ultrasonic spectroscopy. Then, on the basis of the NDE results, three shear specimens sectioned from the sandwich panel to contain each of these regions were mechanically tested.

  6. Comparative fluorescence two-dimensional gel electrophoresis using a gel strip sandwich assembly for the simultaneous on-gel generation of a reference protein spot grid.

    Science.gov (United States)

    Ackermann, Doreen; Wang, Weiqun; Streipert, Benjamin; Geib, Birgit; Grün, Lothar; König, Simone

    2012-05-01

    The comparison of proteins separated on 2DE is difficult due to gel-to-gel variability. Here, a method named comparative fluorescence gel electrophoresis (CoFGE) is presented, which allows the generation of an artificial protein grid in parallel to the separation of an analytical sample on the same gel. Different fluorescent stains are used to distinguish sample and marker on the gel. The technology combines elements of 1DE and 2DE. Special gel combs with V-shaped wells are placed in a stacking gel above the pI strip. Proteins separated on the pI strip are electrophoresed at the same time as marker proteins (commercially available purified protein of different molecular weight) placed in V-wells. In that way, grids providing approximately 100 nodes as landmarks for the determination of protein spot coordinates are generated. Data analysis is possible with commercial 2DE software capable of warping. The method improves comparability of 2DE protein gels, because they are generated in combination with regular in-gel anchor points formed by protein standards. This was shown here for two comparative experiments with three gels each using Escherichia coli lysate. For a set of 47 well-defined samples spots, the deviation of the coordinates was improved from 7% to less than 1% applying warping using the marker grid. Conclusively, as long as the same protein markers, the same size of pI-strips and the same technology are used, gel matching is reproducibly possible. This is an important advancement for projects involving comparison of 2DE-gels produced over several years and in different laboratories. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Origin of Sandwich

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    In every language there are words that have some interesting stories behind them. The word “sandwich” forexample, is very common in English. If we want to know the story behind it, we must know something about an English nobleman named Sandwich who lived in the 18th century.

  8. Making a Sandwich

    Institute of Scientific and Technical Information of China (English)

    郭富强

    2011-01-01

    Do you like eating sandwiches? Here is a recipe(做法) for a fruit sandwich.First , you should put butter(黄油)on two slices(片) of bread. Next, peel(剥开) three bananas. Now cut up(切碎) these three bananas and apple.

  9. Generation of primitive neural stem cells from human fibroblasts using a defined set of factors

    Directory of Open Access Journals (Sweden)

    Takumi Miura

    2015-11-01

    Full Text Available In mice, leukemia inhibitory factor (LIF-dependent primitive neural stem cells (NSCs have a higher neurogenic potential than bFGF-dependent definitive NSCs. Therefore, expandable primitive NSCs are required for research and for the development of therapeutic strategies for neurological diseases. There is a dearth of suitable techniques for the generation of human long-term expandable primitive NSCs. Here, we have described a method for the conversion of human fibroblasts to LIF-dependent primitive NSCs using a strategy based on techniques for the generation of induced pluripotent stem cells (iPSCs. These LIF-dependent induced NSCs (LD-iNSCs can be expanded for >100 passages. Long-term cultured LD-iNSCs demonstrated multipotent neural differentiation potential and could generate motor neurons and dopaminergic neurons, as well as astrocytes and oligodendrocytes, indicating a high level of plasticity. Furthermore, LD-iNSCs easily reverted to human iPSCs, indicating that LD-iNSCs are in an intermediate iPSC state. This method may facilitate the generation of patient-specific human neurons for studies and treatment of neurodegenerative diseases.

  10. Generation of hyaline cartilaginous tissue from mouse adult dermal fibroblast culture by defined factors

    Science.gov (United States)

    Hiramatsu, Kunihiko; Sasagawa, Satoru; Outani, Hidetatsu; Nakagawa, Kanako; Yoshikawa, Hideki; Tsumaki, Noriyuki

    2011-01-01

    Repair of cartilage injury with hyaline cartilage continues to be a challenging clinical problem. Because of the limited number of chondrocytes in vivo, coupled with in vitro de-differentiation of chondrocytes into fibrochondrocytes, which secrete type I collagen and have an altered matrix architecture and mechanical function, there is a need for a novel cell source that produces hyaline cartilage. The generation of induced pluripotent stem (iPS) cells has provided a tool for reprogramming dermal fibroblasts to an undifferentiated state by ectopic expression of reprogramming factors. Here, we show that retroviral expression of two reprogramming factors (c-Myc and Klf4) and one chondrogenic factor (SOX9) induces polygonal chondrogenic cells directly from adult dermal fibroblast cultures. Induced cells expressed marker genes for chondrocytes but not fibroblasts, i.e., the promoters of type I collagen genes were extensively methylated. Although some induced cell lines formed tumors when subcutaneously injected into nude mice, other induced cell lines generated stable homogenous hyaline cartilage–like tissue. Further, the doxycycline-inducible induction system demonstrated that induced cells are able to respond to chondrogenic medium by expressing endogenous Sox9 and maintain chondrogenic potential after substantial reduction of transgene expression. Thus, this approach could lead to the preparation of hyaline cartilage directly from skin, without generating iPS cells. PMID:21293062

  11. Characterizing Class I WW domains defines key specificity determinants and generates mutant domains with novel specificities.

    Science.gov (United States)

    Kasanov, J; Pirozzi, G; Uveges, A J; Kay, B K

    2001-03-01

    WW domains are small protein interaction modules found in a wide range of eukaryotic signaling and structural proteins. Five classes of WW domains have been annotated to date, where each class is largely defined by the type of peptide ligand selected, rather than by similarities within WW domains. Class I WW domains bind Pro-Pro-Xxx-Tyr containing ligands, and it would be of interest to determine residues within the domains that determine this specificity. Fourteen WW domains selected Leu/Pro-Pro-Xxx-Tyr containing peptides ligands via phage display and were thus designated as Class 1 WW domains. These domains include those present in human YAP (hYAP) and WWP3, as well as those found in ubiquitin protein ligases of the Nedd4 family, including mouse Nedd4 (mNedd4), WWP1, WWP2 and Rsp5. Comparing the primary structures of these WW domains highlighted a set of highly conserved residues, in addition to those originally noted to occur within WW domains. Substitutions at two of these conserved positions completely inhibited ligand binding, whereas substitution at a non-conserved position did not. Moreover, mutant WW domains containing substitutions at conserved positions bound novel peptide ligands. Class I WW domains contain a highly conserved set of residues that are important in selecting Pro-Xxx-Tyr containing peptide ligands. The presence of these residues within an uncharacterized WW domain can be used to predict its ability to bind Pro-Xxx-Tyr containing peptide ligands.

  12. Defining the next generation modeling of coastal ecotone dynamics in response to global change

    Science.gov (United States)

    Jiang, Jiang; DeAngelis, Donald L.; Teh, Su-Y; Krauss, Ken W.; Wang, Hongqing; Haidong, Li; Smith, Thomas; Koh, Hock L.

    2016-01-01

    Coastal ecosystems are especially vulnerable to global change; e.g., sea level rise (SLR) and extreme events. Over the past century, global change has resulted in salt-tolerant (halophytic) plant species migrating into upland salt-intolerant (glycophytic) dominated habitats along major rivers and large wetland expanses along the coast. While habitat transitions can be abrupt, modeling the specific drivers of abrupt change between halophytic and glycophytic vegetation is not a simple task. Correlative studies, which dominate the literature, are unlikely to establish ultimate causation for habitat shifts, and do not generate strong predictive capacity for coastal land managers and climate change adaptation exercises. In this paper, we first review possible drivers of ecotone shifts for coastal wetlands, our understanding of which has expanded rapidly in recent years. Any exogenous factor that increases growth or establishment of halophytic species will favor the ecotone boundary moving upslope. However, internal feedbacks between vegetation and the environment, through which vegetation modifies the local microhabitat (e.g., by changing salinity or surface elevation), can either help the system become resilient to future changes or strengthen ecotone migration. Following this idea, we review a succession of models that have provided progressively better insight into the relative importance of internal positive feedbacks versus external environmental factors. We end with developing a theoretical model to show that both abrupt environmental gradients and internal positive feedbacks can generate the sharp ecotonal boundaries that we commonly see, and we demonstrate that the responses to gradual global change (e.g., SLR) can be quite diverse.

  13. A novel and well-defined benchmarking method for second generation read mapping

    Directory of Open Access Journals (Sweden)

    Weese David

    2011-05-01

    Full Text Available Abstract Background Second generation sequencing technologies yield DNA sequence data at ultra high-throughput. Common to most biological applications is a mapping of the reads to an almost identical or highly similar reference genome. The assessment of the quality of read mapping results is not straightforward and has not been formalized so far. Hence, it has not been easy to compare different read mapping approaches in a unified way and to determine which program is the best for what task. Results We present a new benchmark method, called Rabema (Read Alignment BEnchMArk, for read mappers. It consists of a strict definition of the read mapping problem and of tools to evaluate the result of arbitrary read mappers supporting the SAM output format. Conclusions We show the usefulness of the benchmark program by performing a comparison of popular read mappers. The tools supporting the benchmark are licensed under the GPL and available from http://www.seqan.de/projects/rabema.html.

  14. TopoGen: A Network Topology Generation Architecture with application to automating simulations of Software Defined Networks

    CERN Document Server

    Laurito, Andres; The ATLAS collaboration

    2017-01-01

    Simulation is an important tool to validate the performance impact of control decisions in Software Defined Networks (SDN). Yet, the manual modeling of complex topologies that may change often during a design process can be a tedious error-prone task. We present TopoGen, a general purpose architecture and tool for systematic translation and generation of network topologies. TopoGen can be used to generate network simulation models automatically by querying information available at diverse sources, notably SDN controllers. The DEVS modeling and simulation framework facilitates a systematic translation of structured knowledge about a network topology into a formal modular and hierarchical coupling of preexisting or new models of network entities (physical or logical). TopoGen can be flexibly extended with new parsers and generators to grow its scope of applicability. This permits to design arbitrary workflows of topology transformations. We tested TopoGen in a network engineering project for the ATLAS detector ...

  15. Next generation sequencing to define prokaryotic and fungal diversity in the bovine rumen.

    Directory of Open Access Journals (Sweden)

    Derrick E Fouts

    Full Text Available A combination of Sanger and 454 sequences of small subunit rRNA loci were used to interrogate microbial diversity in the bovine rumen of 12 cows consuming a forage diet. Observed bacterial species richness, based on the V1-V3 region of the 16S rRNA gene, was between 1,903 to 2,432 species-level operational taxonomic units (OTUs when 5,520 reads were sampled per animal. Eighty percent of species-level OTUs were dominated by members of the order Clostridiales, Bacteroidales, Erysipelotrichales and unclassified TM7. Abundance of Prevotella species varied widely among the 12 animals. Archaeal species richness, also based on 16S rRNA, was between 8 and 13 OTUs, representing 5 genera. The majority of archaeal OTUs (84% found in this study were previously observed in public databases with only two new OTUs discovered. Observed rumen fungal species richness, based on the 18S rRNA gene, was between 21 and 40 OTUs with 98.4-99.9% of OTUs represented by more than one read, using Good's coverage. Examination of the fungal community identified numerous novel groups. Prevotella and Tannerella were overrepresented in the liquid fraction of the rumen while Butyrivibrio and Blautia were significantly overrepresented in the solid fraction of the rumen. No statistical difference was observed between the liquid and solid fractions in biodiversity of archaea and fungi. The survey of microbial communities and analysis of cross-domain correlations suggested there is a far greater extent of microbial diversity in the bovine rumen than previously appreciated, and that next generation sequencing technologies promise to reveal novel species, interactions and pathways that can be studied further in order to better understand how rumen microbial community structure and function affects ruminant feed efficiency, biofuel production, and environmental impact.

  16. Sandwiched composites in aerospace engineering

    OpenAIRE

    Nunes, J. P.; Silva,J.F.

    2016-01-01

    This chapter considers sandwiched composites used in aerospace applications. Typical sandwich composites consist of two thin, stiff, high-strength facing skins separated by a thick and light core. New developments in the type of face and core materials, production methods and joining and repair techniques are discussed in this chapter. It also discusses various properties as well as their main design methods for existing and future applications of sandwiched composites.

  17. Defining the next generation journal: The NLM-Elsevier interactive publications experiment.

    Science.gov (United States)

    Siegel, Elliot R; Lindberg, Donald A B; Campbell, Glen P; Harless, William G; Goodwin, C Rory

    2010-01-01

    A unique collaborative project to identify interactive enhancements to conventional-print journal articles, and to evaluate their contribution to readers' learning and satisfaction. It was hypothesized that (a) the enhanced article would yield more knowledge acquisition than the original article; (b) the interactivity aspects of the enhanced article would measurably contribute to the acquisition of knowledge; and (c) the enhancements to the original article would increase reader acceptance. Fifteen SNMA medical students, assumed to have a greater generational familiarity and comfort level with interactive electronic media, reviewed 12 articles published in three Elsevier clinical and basic science journals. They used the Student National Medical Association's asynchronous online discussion forum over a four month period to suggest desired enhancements to improve learning. "Prognostic Factors in Stage T1 Bladder Cancer", published in the journal Urology was selected by the investigators as presenting the best opportunity to incorporate many of the students' suggested interactive and presentational enhancements in the limited timeframe available prior to the established test date. Educational, statistical, and medical consultants assisted in designing a test protocol in which 51 second to fourth year medical students were randomly assigned to experimental and control conditions, and were administered either the original or enhanced interactive version of the article on individual computer workstations. Test subjects consisted of 23 participants in the control group (8 males, 15 females) and 28 participants in the experimental group (9 males, 19 females). All subjects completed pre- and post-test instruments which measured their knowledge gain on 30 true-false and multiple-choice questions, along with 7 Likert-type questions measuring acceptance of the articles' format. Time to completion was recorded with the experimental group taking 22 min on average compared to 18

  18. Defining the next generation journal: The NLM–Elsevier interactive publications experiment*

    Science.gov (United States)

    Siegel, Elliot R.; Lindberg, Donald A.B.; Campbell, Glen P.; Harless, William G.; Goodwin, C. Rory

    2010-01-01

    Objective A unique collaborative project to identify interactive enhancements to conventional-print journal articles, and to evaluate their contribution to readers’ learning and satisfaction. Hypothesis It was hypothesized that (a) the enhanced article would yield more knowledge acquisition than the original article; (b) the interactivity aspects of the enhanced article would measurably contribute to the acquisition of knowledge; and (c) the enhancements to the original article would increase reader acceptance. Methods Fifteen SNMA medical students, assumed to have a greater generational familiarity and comfort level with interactive electronic media, reviewed 12 articles published in three Elsevier clinical and basic science journals. They used the Student National Medical Association’s asynchronous online discussion forum over a four month period to suggest desired enhancements to improve learning. “Prognostic Factors in Stage T1 Bladder Cancer”, published in the journal Urology was selected by the investigators as presenting the best opportunity to incorporate many of the students’ suggested interactive and presentational enhancements in the limited timeframe available prior to the established test date. Educational, statistical, and medical consultants assisted in designing a test protocol in which 51 second to fourth year medical students were randomly assigned to experimental and control conditions, and were administered either the original or enhanced interactive version of the article on individual computer workstations. Test subjects consisted of 23 participants in the control group (8 males, 15 females) and 28 participants in the experimental group (9 males, 19 females). All subjects completed pre- and post-test instruments which measured their knowledge gain on 30 true-false and multiple-choice questions, along with 7 Likert-type questions measuring acceptance of the articles’ format. Time to completion was recorded with the experimental

  19. Structural Analysis of Sandwich Foam Panels

    Energy Technology Data Exchange (ETDEWEB)

    Kosny, Jan [ORNL; Huo, X. Sharon [Tennessee Technological University

    2010-04-01

    The Sandwich Panel Technologies including Structural Insulated Panels (SIPs) can be used to replace the conventional wooden-frame construction method. The main purpose of this Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC and SGI Venture, Inc. was to design a novel high R-value type of metal sandwich panelized technology. This CRADA project report presents design concept discussion and numerical analysis results from thermal performance study of this new building envelope system. The main objective of this work was to develop a basic concept of a new generation of wall panel technologies which will have R-value over R-20 will use thermal mass to improve energy performance in cooling dominated climates and will be 100% termite resistant. The main advantages of using sandwich panels are as follows: (1) better energy saving structural panels with high and uniform overall wall R-value across the elevation that could not be achieved in traditional walls; and (2) reducing the use of raw materials or need for virgin lumber. For better utilization of these Sandwich panels, engineers need to have a thorough understanding of the actual performance of the panels and system. Detailed analysis and study on the capacities and deformation of individual panels and its assembly have to be performed to achieve that goal. The major project activity was to conduct structural analysis of the stresses, strains, load capacities, and deformations of individual sandwich components under various load cases. The analysis simulated the actual loading conditions of the regular residential building and used actual material properties of the steel facings and foam.

  20. On the Milnor fibers of sandwiched singularities

    CERN Document Server

    Nemethi, Andras

    2009-01-01

    The sandwiched surface singularities are those rational surface singularities which dominate birationally smooth surface singularities. de Jong and van Straten showed that one can reduce the study of the deformations of a sandwiched surface singularity to the study of deformations of a 1-dimensional object, a so-called decorated plane curve singularity. In particular, the Milnor fibers corresponding to their various smoothing components may be reconstructed up to diffeomorphisms from those deformations of associated decorated curves which have only ordinary singularities. Part of the topology of such a deformation is encoded in the incidence matrix between the irreducible components of the deformed curve and the points which decorate it, well-defined up to permutations of columns. Extending a previous theorem ofours, which treated the case of cyclic quotient singularities, we show that the Milnor fibers which correspond to deformations whose incidence matrices are different up to permutations of columns are n...

  1. Chemical-defined and albumin-free generation of human atrial and ventricular myocytes from human pluripotent stem cells

    Directory of Open Access Journals (Sweden)

    Fei Pei

    2017-03-01

    Full Text Available Most existing culture media for cardiac differentiation of human pluripotent stem cells (hPSCs contain significant amounts of albumin. For clinical transplantation applications of hPSC-derived cardiomyocytes (hPSC-CMs, culturing cells in an albumin containing environment raises the concern of pathogen contamination and immunogenicity to the recipient patients. In addition, batch-to-batch variation of albumin may cause the inconsistent of hPSC cardiac differentiation. Here, we demonstrated that antioxidants l-ascorbic acid, trolox, N-acetyl-l-cysteine (NAC and sodium pyruvate could functionally substitute albumin in the culture medium, and formulated an albumin-free, chemical-defined medium (S12 medium. We showed that S12 medium could support efficient hPSC cardiac differentiation with significantly improved reproducibility, and maintained long-term culture of hPSC-CMs. Furthermore, under chemical-defined and albumin-free conditions, human-induced pluripotent stem cells (hiPSCs were established, and differentiated into highly homogenous atrial and ventricular myocytes in a scalable fashion with normal electrophysiological properties. Finally, we characterized the activity of three typical cardiac ion channels of those cells, and demonstrated that hPSC-derived ventricular cardiomyocytes (hPSC-vCMs were suitable for drug cardiac safety evaluation. In summary, this simplified, chemical-defined and albumin-free culture medium supports efficient generation and maintaining of hPSC-CMs and facilitates both research and clinical applications of these cells.

  2. Ultrasonic Spectroscopy of Stainless Steel Sandwich Panels

    Science.gov (United States)

    Cosgriff, Laura M.; Lerch, Bradley A.; Hebsur, Mohan G.; Baaklini, George Y.; Ghosn, Louis J.

    2003-01-01

    Enhanced, lightweight material systems, such as 17-4PH stainless steel sandwich panels are being developed for use as fan blades and fan containment material systems for next generation engines. In order to improve the production for these systems, nondestructive evaluation (NDE) techniques, such as ultrasonic spectroscopy, are being utilized to evaluate the brazing quality between the 17-4PH stainless steel face plates and the 17-4PH stainless steel foam core. Based on NDE data, shear tests are performed on sections representing various levels of brazing quality from an initial batch of these sandwich structures. Metallographic characterization of brazing is done to corroborate NDE findings and the observed shear failure mechanisms.

  3. Fracture of sandwiched composites

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Weh-Huei.

    1989-01-01

    Fracture of a pair of collinear cracks in various materials, such as an isotropic strip, an orthotropic strip, a bonded isotropic adhesive layer, and sandwiched orthotropic layers, is investigated. The crack surfaces are subjected to an arbitrary opening pressure p(x). The problems are formulated in terms of Fredholm integral equation of the second kind by making use the techniques of Fourier transform and finite Hilbert transform. In case of uniform opening pressure p(x)={sigma}, exact expressions for the stress intensity factors and the shape of deformed crack are obtained. Numerical calculations are carried out to study the effects of various boundary geometries and material properties on the fracture of the chosen materials.

  4. Generation of a quasi-monoenergetic high energy proton beam from a vacuum-sandwiched double layer target irradiated by an ultraintense laser pulse

    Energy Technology Data Exchange (ETDEWEB)

    Nam Kim, Kyung; Lee, Kitae, E-mail: klee@kaeri.re.kr; Hee Park, Seong; Young Lee, Ji; Uk Jeong, Young; Vinokurov, Nikolay [Center for Quantum-Beam-based Radiation Research, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Gi Kim, Yong [Department of Physics, Kongju National University, Kongju (Korea, Republic of)

    2014-04-15

    An acceleration mechanism to generate a high energy proton beam with a narrow energy spread in the laser-induced plasma acceleration of a proton beam is proposed; this mechanism employs two thin foils separated by a narrow vacuum gap. Instead of a thin sheath field at the plasma surfaces, it utilizes an electrostatic field formed in the bulk of the plasma. From a one-dimensional fluid analysis, it has been found that with an appropriate target thickness, protons on the front surface of the second layer can be fed into the plasma, in which the protons are accelerated by an electrostatic field built into the bulk of the plasma. This leads to a proton beam with higher energy and a narrower energy spread than those accelerated at the rear surface of the second layer. The acceleration mechanism is also verified by a two-dimensional particle-in-cell simulation. With a 27-fs long and 2×10{sup 19} W/cm{sup 2} intense laser pulse, a proton beam with an 18-MeV peak energy and a 35% energy spread is generated. The peak energy is higher than that from the rear surface of the second layer by a factor of 3.

  5. Development of Aircraft Sandwich Parts

    Directory of Open Access Journals (Sweden)

    J. Křena

    2000-01-01

    Full Text Available The presented paper shows the design and development process of sandwich parts. A spoiler plate and a main landing gear door are developed. Sandwich parts are made of C/E composite facings and a foam core. FE models have been used for optimization of structures. Emphasis has been placed on deformations of parts under a few load cases. Experimental tests have been used for a verification of structure parts loaded by concentrated forces.

  6. Human pluripotent stem cells differentiated in fully defined medium generate hematopoietic CD34- and CD34+ progenitors with distinct characteristics.

    Science.gov (United States)

    Chicha, Laurie; Feki, Anis; Boni, Alessandro; Irion, Olivier; Hovatta, Outi; Jaconi, Marisa

    2011-02-25

    Differentiation of pluripotent stem cells in vitro provides a powerful means to investigate early developmental fates, including hematopoiesis. In particular, the use of a fully defined medium (FDM) would avoid biases induced by unidentified factors contained in serum, and would also allow key molecular mediators involved in such a process to be identified. Our goal was to induce in vitro, the differentiation of human embryonic stem cells (ESC) and induced pluripotent stem cells (iPSC) into morphologically and phenotypically mature leukocytes and erythrocytes, in the complete absence of serum and feeder cells. ESC and iPSC were sequentially induced in liquid cultures for 4 days with bone morphogenic protein-4, and for 4 days with FLT3-ligand, stem cell factor, thrombopoietin and vascular endothelium growth factor. Cell differentiation status was investigated by both mRNA expression and FACS expression profiles. Cells were further sorted and assayed for their hematopoietic properties in colony-forming unit (CFU) assays. In liquid cultures, cells progressively down-modulated Oct-4 expression while a sizeable cell fraction expressed CD34 de novo. SCL/Tal1 and Runx1 transcripts were exclusively detected in CD34(+) cells. In clonal assays, both ESC and iPSC-derived cells generated CFU, albeit with a 150-fold lower efficacy than cord blood (CB) CD34(+) cells. ESC-derived CD34(+) cells generated myeloid and fully hemoglobinized erythroid cells whereas CD34(-) cells almost exclusively generated small erythroid colonies. Both ESC and iPSC-derived erythroid cells expressed embryonic and fetal globins but were unable to synthesize adult β-globin in contrast with CB cells, suggesting that they had differentiated from primitive rather than from definitive hematopoietic progenitors. Short-term, animal protein-free culture conditions are sufficient to sustain the differentiation of human ESC and iPSC into primitive hematopoietic progenitors, which, in turn, produce more mature

  7. Human pluripotent stem cells differentiated in fully defined medium generate hematopoietic CD34- and CD34+ progenitors with distinct characteristics.

    Directory of Open Access Journals (Sweden)

    Laurie Chicha

    Full Text Available BACKGROUND: Differentiation of pluripotent stem cells in vitro provides a powerful means to investigate early developmental fates, including hematopoiesis. In particular, the use of a fully defined medium (FDM would avoid biases induced by unidentified factors contained in serum, and would also allow key molecular mediators involved in such a process to be identified. Our goal was to induce in vitro, the differentiation of human embryonic stem cells (ESC and induced pluripotent stem cells (iPSC into morphologically and phenotypically mature leukocytes and erythrocytes, in the complete absence of serum and feeder cells. METHODOLOGY/PRINCIPAL FINDINGS: ESC and iPSC were sequentially induced in liquid cultures for 4 days with bone morphogenic protein-4, and for 4 days with FLT3-ligand, stem cell factor, thrombopoietin and vascular endothelium growth factor. Cell differentiation status was investigated by both mRNA expression and FACS expression profiles. Cells were further sorted and assayed for their hematopoietic properties in colony-forming unit (CFU assays. In liquid cultures, cells progressively down-modulated Oct-4 expression while a sizeable cell fraction expressed CD34 de novo. SCL/Tal1 and Runx1 transcripts were exclusively detected in CD34(+ cells. In clonal assays, both ESC and iPSC-derived cells generated CFU, albeit with a 150-fold lower efficacy than cord blood (CB CD34(+ cells. ESC-derived CD34(+ cells generated myeloid and fully hemoglobinized erythroid cells whereas CD34(- cells almost exclusively generated small erythroid colonies. Both ESC and iPSC-derived erythroid cells expressed embryonic and fetal globins but were unable to synthesize adult β-globin in contrast with CB cells, suggesting that they had differentiated from primitive rather than from definitive hematopoietic progenitors. CONCLUSIONS/SIGNIFICANCE: Short-term, animal protein-free culture conditions are sufficient to sustain the differentiation of human ESC and i

  8. Vibration analysis and optimization of sandwich composite with curvilinear fibers

    Science.gov (United States)

    Honda, S.; Narita, Y.

    2016-09-01

    The present paper develops a shell element based on the refined zigzag theory (RZT) and applies it to the vibration analysis and optimization problem of the composite sandwich plate composed of CFRP skins and soft-cores. The RZT accepts large differences in layer stiffness, and requires less calculation effort than the layer-wise or three-dimensional theories. Numerical results revealed that the present method predicts vibration characteristics of composite sandwich plates with soft-core accurately. Then, shapes of reinforcing fibers in CFRP composite skins are optimized to maximize fundamental frequencies. As an optimizer, the particle swarm optimization (PSO) approach is employed since curvilinear fiber shapes are defined by continuous design variables. Obtained results showed that the composite sandwich with optimum curvilinear fiber shapes indicates higher fundamental frequencies compared with straight fibers.

  9. Assessment of the role of in situ generated (E)-2,4-diene-valproic acid in the toxicity of valproic acid and (E)-2-ene-valproic acid in sandwich-cultured rat hepatocytes

    Energy Technology Data Exchange (ETDEWEB)

    Surendradoss, Jayakumar; Chang, Thomas K.H.; Abbott, Frank S., E-mail: frank.abbott@ubc.ca

    2012-11-01

    Valproic acid (VPA) undergoes cytochrome P450-mediated desaturation to form 4-ene-VPA, which subsequently yields (E)-2,4-diene-VPA by β-oxidation. Another biotransformation pathway involves β-oxidation of VPA to form (E)-2-ene-VPA, which also generates (E)-2,4-diene-VPA by cytochrome P450-mediated desaturation. Although the synthetic form of (E)-2,4-diene-VPA is more hepatotoxic than VPA as shown in various experimental models, there is no conclusive evidence to implicate the in situ generated (E)-2,4-diene-VPA in VPA hepatotoxicity. The present study investigated the effects of modulating the in situ formation of (E)-2,4-diene-VPA on markers of oxidative stress (formation of 2′,7′-dichlorofluorescein; DCF), steatosis (accumulation of BODIPY 558/568 C{sub 12}), necrosis (release of lactate dehydrogenase; LDH), and on cellular total glutathione (GSH) levels in sandwich-cultured rat hepatocytes treated with VPA or (E)-2-ene-VPA. Treatment with either of these chemicals alone increased each of the toxicity endpoints. In VPA-treated hepatocytes, (E)-2,4-diene-VPA was detected only at trace levels, even after phenobarbital (PB) pretreatment and there was no effect on the toxicity of VPA. Furthermore, pretreatment with a cytochrome P450 enzyme inhibitor, 1-aminobenzotriazole (1-ABT), did not influence the extent of VPA toxicity in both PB-pretreated and vehicle-pretreated hepatocytes. However, in (E)-2-ene-VPA-treated hepatocytes, PB pretreatment greatly enhanced the levels of (E)-2,4-diene-VPA and this was accompanied by a further enhancement of the effects of (E)-2-ene-VPA on DCF formation, BODIPY accumulation, LDH release, and GSH depletion. Pretreatment with 1-ABT reduced the concentrations of (E)-2,4-diene-VPA and the extent of (E)-2-ene-VPA toxicity; however, this occurred in PB-pretreated hepatocytes, but not in control hepatocytes. In conclusion, in situ generated (E)-2,4-diene-VPA is not responsible for the hepatocyte toxicity of VPA, whereas it

  10. Ethical considerations in developing the next generation of geoscientists and defining a common cause for the geosciences

    Science.gov (United States)

    Keane, Christopher; Boland, Maeve

    2017-04-01

    Much of the discussion about ethics in geoscience centers around the ethical use of the science in a societal context or the social and professional conduct between individuals within the geoscience community. Little has been discussed about the challenges and ethical issues associated with the discipline's effort to build its future workforce in light of cyclical hiring, tightening research budgets, and rapidly evolving skill demands for professional geoscientists. Many geoscientists assume that the profession is underappreciated by society and insufficiently visible to students in higher education. Yet, at least in the United States, we are coming out of nearly a decade of record geoscience undergraduate enrollments and graduate programs that are operating at full capacity. During this time we have witnessed several fundamental shifts in the hiring demands for geoscientists, but in aggregate, have not seen any decrease in hiring of new graduates. The formal education system has not been able to respond to rapid changes in the skills required by employers and is producing a proportion of students unprepared to engage in a career as a geoscientist and, in some cases, unaware of the realities of business cycles and the need for professional and geographic mobility. Another problem for the future workforce is the lack of a fundamental rationale for the geosciences. Currently, the geosciences do not have a substantive vision for their role in society that can define the perception and destiny of the geosciences. During the Cold War and the Space Race, for example, advances in geoscience helped shape the next steps by society. Several initiatives, such as Resourcing Future Generations, are proposing research and social context frameworks for the geosciences that address critical global priorities, such as the Sustainable Development Goals. These projects may establish long-term trends and momentum that the discipline can build around. But what is the discipline's, and

  11. Next generation sequencing-based expression profiling identifies signatures from benign stromal proliferations that define stromal components of breast cancer

    Science.gov (United States)

    2013-01-01

    Introduction Multiple studies have shown that the tumor microenvironment (TME) of carcinomas can play an important role in the initiation, progression, and metastasis of cancer. Here we test the hypothesis that specific benign fibrous soft tissue tumor gene expression profiles may represent distinct stromal fibroblastic reaction types that occur in different breast cancers. The discovered stromal profiles could classify breast cancer based on the type of stromal reaction patterns in the TME. Methods Next generation sequencing-based gene expression profiling (3SEQ) was performed on formalin fixed, paraffin embedded (FFPE) samples of 10 types of fibrous soft tissue tumors. We determined the extent to which these signatures could identify distinct subsets of breast cancers in four publicly available breast cancer datasets. Results A total of 53 fibrous tumors were sequenced by 3SEQ with an average of 29 million reads per sample. Both the gene signatures derived from elastofibroma (EF) and fibroma of tendon sheath (FOTS) demonstrated robust outcome results for survival in the four breast cancer datasets. The breast cancers positive for the EF signature (20-33% of the cohort) demonstrated significantly better outcome for survival. In contrast, the FOTS signature-positive breast cancers (11-35% of the cohort) had a worse outcome. Conclusions We defined and validated two new stromal signatures in breast cancer (EF and FOTS), which are significantly associated with prognosis. Our group has previously identified novel cancer stromal gene expression signatures associated with outcome differences in breast cancer by gene expression profiling of three soft tissue tumors, desmoid-type fibromatosis (DTF), solitary fibrous tumor (SFT), and tenosynovial giant cell tumor (TGCT/CSF1), as surrogates for stromal expression patterns. By combining the stromal signatures of EF and FOTS, with our previously identified DTF and TGCT/CSF1 signatures we can now characterize clinically

  12. Enhancing Fatigue Performance of Sandwich Composites with Nanophased Core

    Directory of Open Access Journals (Sweden)

    S. Zainuddin

    2010-01-01

    Full Text Available We report fatigue performance of sandwich composites with nanophased core under shear load. Nanophased core was made from polyurethane foam dispersed with carbon nanofiber (CNF. CNFs were dispersed into part-A of liquid polyurethane through a sonication process and the loading of nanoparticles was 1.0 wt%. After dispersion, part-A was mixed with part-B, cast into a mold, and allowed to cure. Nanophased foam was then used to fabricate sandwich composites. Static shear tests revealed that strength and modulus of nanophased foams were 33% and 19% higher than those of unreinforced (neat foams. Next, shear fatigue tests were conducted at a frequency of 3 Hz and stress ratio (R of 0.1. S-N curves were generated and fatigue performances were compared. Number of cycles to failure for nanophased sandwich was significantly higher than that of the neat ones. For example, at 57% of ultimate shear strength, nanophased sandwich would survive 400,000 cycles more than its neat counterpart. SEM micrographs indicated stronger cell structures with nanophased foams. These stronger cells strengthened the sub-interface zones underneath the actual core-skin interface. High toughness of the sub-interface layer delayed initiation of fatigue cracks and thereby increased the fatigue life of nanophased sandwich composites.

  13. A comparison of FRP-sandwich penetrating impact test methods

    Energy Technology Data Exchange (ETDEWEB)

    Hildebrand, M. [VTT Manufacturing Technology, Espoo (Finland). Maritime and Mechanical Engineering

    1996-12-31

    The main objective of this project is to identify the test methods which provide useful results for the different types of penetrating impacts occurring in sandwich structures. A series of penetrating impact tests on FRP-sandwich panels is performed using three different test methods and the results of the test methods are compared. The test methods used are the standardised method ISO 6603 and two non-standardised methods. The first non-standardised method uses a pyramid-shaped impactor instead of the cylindrical impactor used in the ISO 6603 method. In the second non-standardised method, the impact test is performed quasistatically using a cylindrical impactor. Possible stages of failure occurring in FRP-sandwich during a penetrating impact are illustrated. A comprehensive test method should be able to provoke various failure modes, as observed in impact failures of actual sandwich structures. The results obtained with the three test methods lead to a different ranking in impact strength of the panels. Hence, impact test results obtained with different test methods are not even qualitatively comparable. The pyramid-shaped impactor is able to generate clearly more failure modes than the cylindrical impactor in the ISO 6603 method. Therefore, it is considered to be of more practical value for determining the impact strength of PRP-sandwich structures. (orig.) (15 refs.)

  14. Structural and failure mechanics of sandwich composites

    CERN Document Server

    Carlsson, LA; Carlsson, Leif A

    2011-01-01

    Focusing on important deformation and failure modes of sandwich structures, this volume describes the mechanics behind fracture processes. The text also reviews test methods developed for the cr, structural integrity, and failure mechanisms of sandwich structures.

  15. Technology sandwich panels with mineral wool insulation

    OpenAIRE

    Tyulenev M.; Burtzeva M.; Mednikova E.

    2016-01-01

    Sandwich panel — self–supporting structure consisting of metal cladding and thermal insulation core. As a heat–insulating core used mineral wool, foamed plastics. Production of sandwich panels with insulation mineral wool performed on modular lines for the production of aggregate or conveyer scheme. Sandwich panels are used as load–bearing elements of the facades, as well as a roof covering.

  16. Dielectrophoretic behaviours of microdroplet sandwiched between LN substrates.

    Science.gov (United States)

    Chen, Lipin; Li, Shaobei; Fan, Bolin; Yan, Wenbo; Wang, Donghui; Shi, Lihong; Chen, Hongjian; Ban, Dechao; Sun, Shihao

    2016-07-07

    We demonstrate a sandwich configuration for microfluidic manipulation in LiNbO3 platform based on photovoltaic effect, and the behaviours of dielectric microdroplet under this sandwich configuration are investigated. It is found that the microdroplet can generate in the form of liquid bridge inside the LiNbO3-based sandwich structure under the governing dielectrophoretic force, and the dynamic process of microdroplet generation highly depends on the substrate combinations. Dynamic features found for different combinations are explained by the different electrostatic field distribution basing on the finite-element simulation results. Moreover, the electrostatic field required by the microdroplet generation is estimated through meniscus evolution and it is found in good agreement with the simulated electrostatic field inside the sandwich gap. Several kinds of microdroplet manipulations are attempted in this work. We suggest that the local dielectrophoretic force acting on the microdroplet depends on the distribution of the accumulated irradiation dosage. Without using any additional pumping or jetting actuator, the microdroplet can be step-moved, deformed or patterned by the inconsecutive dot-irradiation scheme, as well as elastically stretched out and back or smoothly guided in a designed pass by the consecutive line-irradiation scheme.

  17. Dielectrophoretic behaviours of microdroplet sandwiched between LN substrates

    Science.gov (United States)

    Chen, Lipin; Li, Shaobei; Fan, Bolin; Yan, Wenbo; Wang, Donghui; Shi, Lihong; Chen, Hongjian; Ban, Dechao; Sun, Shihao

    2016-07-01

    We demonstrate a sandwich configuration for microfluidic manipulation in LiNbO3 platform based on photovoltaic effect, and the behaviours of dielectric microdroplet under this sandwich configuration are investigated. It is found that the microdroplet can generate in the form of liquid bridge inside the LiNbO3-based sandwich structure under the governing dielectrophoretic force, and the dynamic process of microdroplet generation highly depends on the substrate combinations. Dynamic features found for different combinations are explained by the different electrostatic field distribution basing on the finite-element simulation results. Moreover, the electrostatic field required by the microdroplet generation is estimated through meniscus evolution and it is found in good agreement with the simulated electrostatic field inside the sandwich gap. Several kinds of microdroplet manipulations are attempted in this work. We suggest that the local dielectrophoretic force acting on the microdroplet depends on the distribution of the accumulated irradiation dosage. Without using any additional pumping or jetting actuator, the microdroplet can be step-moved, deformed or patterned by the inconsecutive dot-irradiation scheme, as well as elastically stretched out and back or smoothly guided in a designed pass by the consecutive line-irradiation scheme.

  18. Wire and Packing Tape Sandwiches

    Science.gov (United States)

    Rabinowitz, Sandy

    2009-01-01

    In this article, the author describes how students can combine craft wire with clear packing tape to create a two-dimensional design that can be bent and twisted to create a three-dimensional form. Students sandwich wire designs between two layers of tape. (Contains 1 online resource.)

  19. Thermal-Diode Sandwich Panel

    Science.gov (United States)

    Basiulis, A.

    1986-01-01

    Thermal diode sandwich panel transfers heat in one direction, but when heat load reversed, switches off and acts as thermal insulator. Proposed to control temperature in spacecraft and in supersonic missiles to protect internal electronics. In combination with conventional heat pipes, used in solar panels and other heat-sensitive systems.

  20. High temperature structural sandwich panels

    Science.gov (United States)

    Papakonstantinou, Christos G.

    High strength composites are being used for making lightweight structural panels that are being employed in aerospace, naval and automotive structures. Recently, there is renewed interest in use of these panels. The major problem of most commercial available sandwich panels is the fire resistance. A recently developed inorganic matrix is investigated for use in cases where fire and high temperature resistance are necessary. The focus of this dissertation is the development of a fireproof composite structural system. Sandwich panels made with polysialate matrices have an excellent potential for use in applications where exposure to high temperatures or fire is a concern. Commercial available sandwich panels will soften and lose nearly all of their compressive strength temperatures lower than 400°C. This dissertation consists of the state of the art, the experimental investigation and the analytical modeling. The state of the art covers the performance of existing high temperature composites, sandwich panels and reinforced concrete beams strengthened with Fiber Reinforced Polymers (FRP). The experimental part consists of four major components: (i) Development of a fireproof syntactic foam with maximum specific strength, (ii) Development of a lightweight syntactic foam based on polystyrene spheres, (iii) Development of the composite system for the skins. The variables are the skin thickness, modulus of elasticity of skin and high temperature resistance, and (iv) Experimental evaluation of the flexural behavior of sandwich panels. Analytical modeling consists of a model for the flexural behavior of lightweight sandwich panels, and a model for deflection calculations of reinforced concrete beams strengthened with FRP subjected to fatigue loading. The experimental and analytical results show that sandwich panels made with polysialate matrices and ceramic spheres do not lose their load bearing capability during severe fire exposure, where temperatures reach several

  1. Failure characteristics of a thin metallic sandwich plate with metallic sheared dimple cores under low-velocity impact loading

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Dong Gyu; Jeong, Woo Chul [Chosun University, Gwangju (Korea, Republic of)

    2013-10-15

    The functionality and the performance of a lightweight sandwich plate with periodic cellular metal (PCM) cores are influenced by failure characteristics of the lightweight sandwich plate. The goal of this paper is to investigate the failure characteristics of a thin metallic sandwich plate with metallic sheared dimple cores under low-velocity impact loading through nonlinear finite element analysis. The influence of the imperfection mode of the cores on the impact response of a thin sandwich plate is examined to obtain a proper simulation model. Repeated finite element analyses are performed to examine the failure modes of the sandwich plate for different impact conditions. Normalized impact parameters are defined in order to generalize a dynamic failure map (DFM). DFMs of the thin metallic sandwich plate have been estimated via the regression analysis of critical impact conditions for each failure mode. In addition, the influence of the normalized impact parameters on the failure mode has been investigated using the DFM.

  2. Standard Test Method for Sandwich Corrosion Test

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method defines the procedure for evaluating the corrosivity of aircraft maintenance chemicals, when present between faying surfaces (sandwich) of aluminum alloys commonly used for aircraft structures. This test method is intended to be used in the qualification and approval of compounds employed in aircraft maintenance operations. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements appear in Section 9.

  3. Generation of live piglets from cryopreserved oocytes for the first time using a defined system for in vitro embryo production.

    Science.gov (United States)

    Somfai, Tamás; Yoshioka, Koji; Tanihara, Fuminori; Kaneko, Hiroyuki; Noguchi, Junko; Kashiwazaki, Naomi; Nagai, Takashi; Kikuchi, Kazuhiro

    2014-01-01

    We report the successful piglet production from cryopreserved oocytes for the first time by using a simple, high capacity vitrification protocol for preservation and a defined system for in vitro embryo production. Immature cumulus-oocyte complexes (COCs) from prepubertal gilts were vitrified in microdrops and stored in liquid nitrogen. After warming, COCs were subjected to in vitro maturation (IVM), fertilization (IVF), and subsequent culture (IVC). Adjusting warmplate temperature to 42 °C during warming prevented temperature drops in a medium below 34.0 °C and significantly increased the percentage of oocyte survival and thus blastocyst yields obtained from total vitrified oocytes compared with that of warming at 38 °C (87.1% vs 66.9% and 4.4% vs 2.7%, respectively). Nuclear maturation and fertilization of oocytes were not affected by vitrification and warming temperature. Blastocyst development on day 7 (day 0 = IVF) of the surviving oocytes after warming at 38 °C and 42 °C was not different but lower (Pvitro using defined media. Using these modifications, live piglets could be obtained from cryopreserved oocytes for the first time.

  4. Generation of Synthetic Transcriptome Data with Defined Statistical Properties for the Development and Testing of New Analysis Methods

    Institute of Scientific and Technical Information of China (English)

    Guillaume Brysbaert; Sebastian Noth; Arndt Benecke

    2007-01-01

    We have previously developed a combined signal/variance distribution model that accounts for the particular statistical properties of datasets generated on the Applied Biosystems AB1700 transcriptome system. Here we show that this model can be efficiently used to generate synthetic datasets with statistical properties virtually identical to those of the actual data by aid of the JAVA application ace.map creator 1.0 that we have developed. The fundamentally different structure of AB1700 transcriptome profiles requires re-evaluation, adaptation, or even redevelopment of many of the standard microarray analysis methods in order to avoid misinterpretation of the data on the one hand, and to draw full benefit from their increased specificity and sensitivity on the other hand. Our composite data model and the ace.map creator 1.0 application thereby not only present proof of the correctness of our parameter estimation, but also provide a tool for the generation of synthetic test data that will be useful for further development and testing of analysis methods.

  5. Generation of live piglets from cryopreserved oocytes for the first time using a defined system for in vitro embryo production.

    Directory of Open Access Journals (Sweden)

    Tamás Somfai

    Full Text Available We report the successful piglet production from cryopreserved oocytes for the first time by using a simple, high capacity vitrification protocol for preservation and a defined system for in vitro embryo production. Immature cumulus-oocyte complexes (COCs from prepubertal gilts were vitrified in microdrops and stored in liquid nitrogen. After warming, COCs were subjected to in vitro maturation (IVM, fertilization (IVF, and subsequent culture (IVC. Adjusting warmplate temperature to 42 °C during warming prevented temperature drops in a medium below 34.0 °C and significantly increased the percentage of oocyte survival and thus blastocyst yields obtained from total vitrified oocytes compared with that of warming at 38 °C (87.1% vs 66.9% and 4.4% vs 2.7%, respectively. Nuclear maturation and fertilization of oocytes were not affected by vitrification and warming temperature. Blastocyst development on day 7 (day 0 = IVF of the surviving oocytes after warming at 38 °C and 42 °C was not different but lower (P<0.05 than those of non-vitrified control oocytes (4.6%, 5.2% and 17.9%, respectively. However, blastocyst cell numbers in the control and vitrified groups were similar irrespective of warming temperature. Omitting porcine follicular fluid (pFF from IVM medium (POM did not affect maturation, fertilization and embryo development of vitrified-warmed oocytes. Transfer of blastocysts obtained on day 5 from vitrified oocytes matured either with or without pFF into 4 recipients (2 for each group resulted in 4 pregnancies and the delivery of a total of 18 piglets. In conclusion, optimization of warming temperature was a key factor for achieving high survival rates, and surviving oocytes could be utilized in vitro using defined media. Using these modifications, live piglets could be obtained from cryopreserved oocytes for the first time.

  6. How do drug users define their progress in harm reduction programs? Qualitative research to develop user-generated outcomes

    Directory of Open Access Journals (Sweden)

    Ruefli Terry

    2004-08-01

    Full Text Available Abstract Background Harm reduction is a relatively new and controversial model for treating drug users, with little formal research on its operation and effectiveness. In order to advance the study of harm reduction programs and our understanding of how drug users define their progress, qualitative research was conducted to develop outcomes of harm reduction programming that are culturally relevant, incremental, (i.e., capable of measuring change, and hierarchical (i.e., capable of showing how clients improve over time. Methods The study used nominal group technique (NGT to develop the outcomes (phase 1 and focus group interviews to help validate the findings (phase 2. Study participants were recruited from a large harm-reduction program in New York City and involved approximately 120 clients in 10 groups in phase 1 and 120 clients in 10 focus groups in phase 2. Results Outcomes of 10 life areas important to drug users were developed that included between 10 to 15 incremental measures per outcome. The outcomes included ways of 1 making money; 2 getting something good to eat; 3 being housed/homeless; 4 relating to families; 5 getting needed programs/benefits/services; 6 handling health problems; 7 handling negative emotions; 8 handling legal problems; 9 improving oneself; and 10 handling drug-use problems. Findings also provided insights into drug users' lives and values, as well as a window into understanding how this population envisions a better quality of life. Results challenged traditional ways of measuring drug users based solely on quantity used and frequency of use. They suggest that more appropriate measures are based on the extent to which drug users organize their lives around drug use and how much drug use is integrated into their lives and negatively impacts other aspects of their lives. Conclusions Harm reduction and other programs serving active drug users and other marginalized people should not rely on institutionalized

  7. Damage Tolerance of Sandwich Plates With Debonded Face Sheets

    Science.gov (United States)

    Sankar, Bhavani V.

    2001-01-01

    A nonlinear finite element analysis was performed to simulate axial compression of sandwich beams with debonded face sheets. The load - end-shortening diagrams were generated for a variety of specimens used in a previous experimental study. The energy release rate at the crack tip was computed using the J-integral, and plotted as a function of the load. A detailed stress analysis was performed and the critical stresses in the face sheet and the core were computed. The core was also modeled as an isotropic elastic-perfectly plastic material and a nonlinear post buckling analysis was performed. A Graeco-Latin factorial plan was used to study the effects of debond length, face sheet and core thicknesses, and core density on the load carrying capacity of the sandwich composite. It has been found that a linear buckling analysis is inadequate in determining the maximum load a debonded sandwich beam can carry. A nonlinear post-buckling analysis combined with an elastoplastic model of the core is required to predict the compression behavior of debonded sandwich beams.

  8. Generating induced pluripotent stem cells from common marmoset (Callithrix jacchus) fetal liver cells using defined factors, including Lin28.

    Science.gov (United States)

    Tomioka, Ikuo; Maeda, Takuji; Shimada, Hiroko; Kawai, Kenji; Okada, Yohei; Igarashi, Hiroshi; Oiwa, Ryo; Iwasaki, Tsuyoshi; Aoki, Mikio; Kimura, Toru; Shiozawa, Seiji; Shinohara, Haruka; Suemizu, Hiroshi; Sasaki, Erika; Okano, Hideyuki

    2010-09-01

    Although embryonic stem (ES) cell-like induced pluripotent stem (iPS) cells have potential therapeutic applications in humans, they are also useful for creating genetically modified human disease models in nonhuman primates. In this study, we generated common marmoset iPS cells from fetal liver cells via the retrovirus-mediated introduction of six human transcription factors: Oct-3/4, Sox2, Klf4, c-Myc, Nanog, and Lin28. Four to five weeks after introduction, several colonies resembling marmoset ES cells were observed and picked for further expansion in ES cell medium. Eight cell lines were established, and validation analyses of the marmoset iPS cells followed. We detected the expression of ES cell-specific surface markers. Reverse transcription-PCR showed that these iPS cells expressed endogenous Oct-3/4, Sox2, Klf4, c-Myc, Nanog and Lin28 genes, whereas all of the transgenes were silenced. Karyotype analysis showed that two of three iPS cell lines retained a normal karyotype after a 2-month culture. Both embryoid body and teratoma formation showed that marmoset iPS cells had the developmental potential to give rise to differentiated derivatives of all three primary germ layers. In summary, we generated marmoset iPS cells via the transduction of six transcription factors; this provides a powerful preclinical model for studies in regenerative medicine.

  9. Combined compressive and shear buckling analysis of hypersonic aircraft sandwich panels

    Science.gov (United States)

    Ko, William L.; Jackson, Raymond H.

    1992-01-01

    The combined-load (compression and shear) buckling equations were established for orthotropic sandwich panels by using the Rayleigh-Ritz method to minimize the panel total potential energy. The resulting combined-load buckling equations were used to generate buckling interaction curves for super-plastically-formed/diffusion-bonded titanium truss-core sandwich panels and titanium honeycomb-core sandwich panels having the same specific weight. The relative combined-load buckling strengths of these two types of sandwich panels are compared with consideration of their sandwich orientations. For square and nearly square panels of both types, the combined load always induces symmetric buckling. As the panel aspect ratios increase, antisymmetric buckling will show up when the loading is shear-dominated combined loading. The square panel (either type) has the highest combined buckling strength, but the combined load buckling strength drops sharply as the panel aspect ratio increases. For square panels, the truss-core sandwich panel has higher compression-dominated load buckling strength. However, for shear dominated loading, the square honeycomb-core sandwich panel has higher shear-dominated combined load buckling strength.

  10. Combined compressive and shear buckling analysis of hypersonic aircraft structural sandwich panels

    Science.gov (United States)

    Ko, William L.; Jackson, Raymond H.

    1991-01-01

    The combined-load (compression and shear) buckling equations were established for orthotropic sandwich panels by using the Rayleigh-Ritz method to minimize the panel total potential energy. The resulting combined-load buckling equations were used to generate buckling interaction curves for super-plastically-formed/diffusion-bonded titanium truss-core sandwich panels and titanium honeycomb-core sandwich panels having the same specific weight. The relative combined-load buckling strengths of these two types of sandwich panels are compared with consideration of their sandwich orientations. For square and nearly square panels of both types, the combined load always induces symmetric buckling. As the panel aspect ratios increase, antisymmetric buckling will show up when the loading is shear-dominated combined loading. The square panel (either type) has the highest combined buckling strength, but the combined load buckling strength drops sharply as the panel aspect ratio increases. For square panels, the truss-core sandwich panel has higher compression-dominated combined load buckling strength. However, for shear dominated loading, the square honeycomb-core sandwich panel has higher shear-dominated combined load buckling strength.

  11. Sandwiched Rényi divergence satisfies data processing inequality

    Energy Technology Data Exchange (ETDEWEB)

    Beigi, Salman [School of Mathematics, Institute for Research in Fundamental Sciences (IPM), P.O. Box 19395-5746, Tehran (Iran, Islamic Republic of)

    2013-12-15

    Sandwiched (quantum) α-Rényi divergence has been recently defined in the independent works of Wilde et al. [“Strong converse for the classical capacity of entanglement-breaking channels,” preprint http://arxiv.org/abs/arXiv:1306.1586 (2013)] and Müller-Lennert et al. [“On quantum Rényi entropies: a new definition, some properties and several conjectures,” preprint http://arxiv.org/abs/arXiv:1306.3142v1 (2013)]. This new quantum divergence has already found applications in quantum information theory. Here we further investigate properties of this new quantum divergence. In particular, we show that sandwiched α-Rényi divergence satisfies the data processing inequality for all values of α > 1. Moreover we prove that α-Holevo information, a variant of Holevo information defined in terms of sandwiched α-Rényi divergence, is super-additive. Our results are based on Hölder's inequality, the Riesz-Thorin theorem and ideas from the theory of complex interpolation. We also employ Sion's minimax theorem.

  12. Sandwiched R\\'enyi Convergence for Quantum Evolutions

    OpenAIRE

    Müller-Hermes, Alexander; Franca, Daniel Stilck

    2016-01-01

    We study the speed of convergence of a primitive quantum time evolution towards its fixed point in the distance of sandwiched R\\'enyi divergences. For each of these distance measures the convergence is typically exponentially fast and the best exponent is given by a constant (similar to a logarithmic Sobolev constant) depending only on the generator of the time evolution. We establish relations between these constants and the logarithmic Sobolev constants as well as the spectral gap. An impor...

  13. A defined, feeder-free, serum-free system to generate in vitro hematopoietic progenitors and differentiated blood cells from hESCs and hiPSCs.

    Directory of Open Access Journals (Sweden)

    Giorgia Salvagiotto

    Full Text Available Human ESC and iPSC are an attractive source of cells of high quantity and purity to be used to elucidate early human development processes, for drug discovery, and in clinical cell therapy applications. To efficiently differentiate pluripotent cells into a pure population of hematopoietic progenitors we have developed a new 2-dimensional, defined and highly efficient protocol that avoids the use of feeder cells, serum or embryoid body formation. Here we showed that a single matrix protein in combination with growth factors and a hypoxic environment is sufficient to generate from pluripotent cells hematopoietic progenitors capable of differentiating further in mature cell types of different lineages of the blood system. We tested the differentiation method using hESCs and 9 iPSC lines generated from different tissues. These data indicate the robustness of the protocol providing a valuable tool for the generation of clinical-grade hematopoietic cells from pluripotent cells.

  14. Composite Sandwich Technologies Lighten Components

    Science.gov (United States)

    2010-01-01

    Leveraging its private resources with several Small Business Innovation Research (SBIR) contracts with both NASA and the U.S. Department of Defense, WebCore Technologies LLC, of Miamisburg, Ohio, developed a fiber-reinforced foam sandwich panel it calls TYCOR that can be used for a wide variety of industrial and consumer applications. Testing at Glenn Research Center?s Ballistic Impact Facility demonstrated that the technology was able to exhibit excellent damage localization and stiffness during impact. The patented and trademarked material has found use in many demanding applications, including marine, ground transportation, mobile shelters, bridges, and most notably, wind turbines.

  15. Generation of iPS cells using defined factors linked via the self-cleaving 2A sequences in a single open reading frame

    Science.gov (United States)

    Shao, Lijian; Feng, Wei; Sun, Yan; Bai, Hao; Liu, Jun; Currie, Caroline; Kim, Jaejung; Gama, Rafael; Wang, Zack; Qian, Zhijian; Liaw, Lucy; Wu, Wen-Shu

    2010-01-01

    Generation of induced pluripotent stem (iPS) cells from somatic cells has been achieved successfully by simultaneous viral transduction of defined reprogramming transcription factors (TFs). However, the process requires multiple viral vectors for gene delivery. As a result, generated iPS cells harbor numerous viral integration sites in their genomes. This can increase the probability of gene mutagenesis and genomic instability, and present significant barriers to both research and clinical application studies of iPS cells. In this paper, we present a simple lentivirus reprogramming system in which defined factors are fused in-frame into a single open reading frame (ORF) via self-cleaving 2A sequences. A GFP marker is placed downstream of the transgene to enable tracking of transgene expression. We demonstrate that this polycistronic expression system efficiently generates iPS cells. The generated iPS cells have normal karyotypes and are similar to mouse embryonic stem cells in morphology and gene expression. Moreover, they can differentiate into cell types of the three embryonic germ layers in both in vitro and in vivo assays. Remarkably, most of these iPS cells only harbor a single copy of viral vector. This system provides a valuable tool for generation of iPS cells, and our data suggest that the balance of expression of transduced reprogramming TFs in each cell is essential for the reprogramming process. More importantly, when delivered by non-integrating gene-delivery systems, this re-engineered single ORF will facilitate efficient generation of human iPS cells free of genetic modifications. PMID:19238173

  16. Generation of Ips cells using defined factors linked via the self-cleaving 2A sequences in a single open reading frame

    Institute of Scientific and Technical Information of China (English)

    Lijian Shao; Wei Feng; Yan Sun; Hao Bai; Jun Liu; Caroline Currie; Jaejung Kim; Rafael Gama; Zack Wang; Zhijian Qian; Lucy Liaw; Wen-Shu Wu

    2009-01-01

    Generation of induced pluripotent stem (iPS) cells from somatic cells has been achieved successfully by simultane-ous viral transduction of defined reprogramming transcription factors (TFs). However, the process requires multiple viral vectors for gene delivery. As a result, generated iPS cells harbor numerous viral integration sites in their ge-nomes. This can increase the probability of gene mutagenesis and genomic instability, and present significant barriers to both research and clinical application studies of iPS cells. In this paper, we present a simple lentivirus reprogram-ming system in which defined factors are fused in-frame into a single open reading frame (ORF) via self-cleaving 2A sequences. A GFP marker is placed downstream of the transgene to enable tracking of transgene expression. We demonstrate that this polycistronic expression system efficiently generates iPS cells. The generated iPS cells have nor-mal karyotypes and are similar to mouse embryonic stem cells in morphology and gene expression. Moreover, they can differentiate into cell types of the three embryonic germ layers in both in vitro and in vivo assays. Remarkably, most of these iPS cells only harbor a single copy of viral vector. This system provides a valuable tool for generation of iPS cells, and our data suggest that the balance of expression of transduced reprogramming TFs in each cell is essen-tial for the reprogramming process. More importantly, when delivered by non-integrating gene-delivery systems, this re-engineered single ORF will facilitate efficient generation of human iPS cells free of genetic modifications.

  17. αIIbβ3 variants defined by next-generation sequencing: Predicting variants likely to cause Glanzmann thrombasthenia

    Science.gov (United States)

    Buitrago, Lorena; Rendon, Augusto; Liang, Yupu; Simeoni, Ilenia; Negri, Ana; Filizola, Marta; Ouwehand, Willem H.; Coller, Barry S.; Alessi, Marie-Christine; Ballmaier, Matthias; Bariana, Tadbir; Bellissimo, Daniel; Bertoli, Marta; Bray, Paul; Bury, Loredana; Carrell, Robin; Cattaneo, Marco; Collins, Peter; French, Deborah; Favier, Remi; Freson, Kathleen; Furie, Bruce; Germeshausen, Manuela; Ghevaert, Cedric; Gomez, Keith; Goodeve, Anne; Gresele, Paolo; Guerrero, Jose; Hampshire, Dan J.; Hadinnapola, Charaka; Heemskerk, Johan; Henskens, Yvonne; Hill, Marian; Hogg, Nancy; Johnsen, Jill; Kahr, Walter; Kerr, Ron; Kunishima, Shinji; Laffan, Michael; Natwani, Amit; Neerman-Arbez, Marguerite; Nurden, Paquita; Nurden, Alan; Ormiston, Mark; Othman, Maha; Ouwehand, Willem; Perry, David; Vilk, Shoshana Ravel; Reitsma, Pieter; Rondina, Matthew; Simeoni, Ilenia; Smethurst, Peter; Stephens, Jonathan; Stevenson, William; Szkotak, Artur; Turro, Ernest; Van Geet, Christel; Vries, Minka; Ward, June; Waye, John; Westbury, Sarah; Whiteheart, Sidney; Wilcox, David; Zhang, Bi

    2015-01-01

    Next-generation sequencing is transforming our understanding of human genetic variation but assessing the functional impact of novel variants presents challenges. We analyzed missense variants in the integrin αIIbβ3 receptor subunit genes ITGA2B and ITGB3 identified by whole-exome or -genome sequencing in the ThromboGenomics project, comprising ∼32,000 alleles from 16,108 individuals. We analyzed the results in comparison with 111 missense variants in these genes previously reported as being associated with Glanzmann thrombasthenia (GT), 20 associated with alloimmune thrombocytopenia, and 5 associated with aniso/macrothrombocytopenia. We identified 114 novel missense variants in ITGA2B (affecting ∼11% of the amino acids) and 68 novel missense variants in ITGB3 (affecting ∼9% of the amino acids). Of the variants, 96% had minor allele frequencies (MAF) < 0.1%, indicating their rarity. Based on sequence conservation, MAF, and location on a complete model of αIIbβ3, we selected three novel variants that affect amino acids previously associated with GT for expression in HEK293 cells. αIIb P176H and β3 C547G severely reduced αIIbβ3 expression, whereas αIIb P943A partially reduced αIIbβ3 expression and had no effect on fibrinogen binding. We used receiver operating characteristic curves of combined annotation-dependent depletion, Polyphen 2-HDIV, and sorting intolerant from tolerant to estimate the percentage of novel variants likely to be deleterious. At optimal cut-off values, which had 69–98% sensitivity in detecting GT mutations, between 27% and 71% of the novel αIIb or β3 missense variants were predicted to be deleterious. Our data have implications for understanding the evolutionary pressure on αIIbβ3 and highlight the challenges in predicting the clinical significance of novel missense variants. PMID:25827233

  18. Standard Terminology of Structural Sandwich Constructions

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 This terminology covers terms necessary for a basic uniform understanding and usage of the language peculiar to structural sandwich constructions. The simplest structural sandwich is a three layered construction formed by bonding a thin layer (facing) to each side of a thick layer (core).

  19. Development and Evaluation of Stitched Sandwich Panels

    Science.gov (United States)

    Stanley, Larry E.; Adams, Daniel O.; Reeder, James R. (Technical Monitor)

    2001-01-01

    This study explored the feasibility and potential benefits provided by the addition of through-the-thickness reinforcement to sandwich structures. Through-the-thickness stitching is proposed to increase the interlaminar strength and damage tolerance of composite sandwich structures. A low-cost, out-of-autoclave processing method was developed to produce composite sandwich panels with carbon fiber face sheets, a closed-cell foam core, and through-the-thickness Kevlar stitching. The sandwich panels were stitched in a dry preform state, vacuum bagged, and infiltrated using Vacuum Assisted Resin Transfer Molding (VARTM) processing. For comparison purposes, unstitched sandwich panels were produced using the same materials and manufacturing methodology. Test panels were produced initially at the University of Utah and later at NASA Langley Research Center. Four types of mechanical tests were performed: flexural testing, flatwise tensile testing, core shear testing, and edgewise compression testing. Drop-weight impact testing followed by specimen sectioning was performed to characterize the damage resistance of stitched sandwich panels. Compression after impact (CAI) testing was performed to evaluate the damage tolerance of the sandwich panels. Results show significant increases in the flexural stiffness and strength, out-of-plane tensile strength, core shear strength, edgewise compression strength, and compression-after-impact strength of stitched sandwich structures.

  20. Detection of Penicillinase in Milk by Sandwich ELISA Based Polyclonal and Monoclonal Antibody.

    Science.gov (United States)

    Zhao, Yinli; Li, Guoxi

    2016-01-01

    A sandwich ELISA has been developed using polyclonal and monoclonal antibody for the determination of penicillinase in milk. For this purpose, specific polyclonal and monoclonal antibodies against penicillinase were generated and characterized. Using penicillinase standards prepared from 1-128 ng/mL, the method indicated that the detection limit of the sandwich ELISA, as measured in an ELISA plate reader, was as low as 0.86 ng/mL of penicillinase. For determine the accuracy, raw milk containing 2, 8, 32, and 64 ng/mL of penicillinase were tested by sandwich ELISA. Recoveries were from 93-97.5%, and the coefficient of variation [CV (%)] were from 5.55-8.38%. For interassay reproducibility, recoveries were from 89.5-95.1%, the coefficient of variation [CV (%)] were from 5.26-9.58%. This sandwich ELISA provides a useful screening method for quantitative detection of penicillinase in milk.

  1. New "sandwich" structures conformed from three dimensional

    Directory of Open Access Journals (Sweden)

    Alba, Juan J.

    1996-03-01

    Full Text Available Poor interlaminar properties as well as poor-skin-to-core adhesion properties are very often the common existing problems we find when designing with "sandwich" structures. A new type of 3D-fabric "sandwich" structure is being developed in order to avoid these problems. Although the manufacturing process is very simple, a very complex "sandwich" structure is obtained as a result of the complexity of the 3D-fabric used. This 3D-fabric is a 3D woven glass fabric produced on velvet weaving machines with glass yarns. It is an integrally woven "sandwich" laminate for all kinds of composite products. The strength of the vertical fibers makes, that also after impregnation with a resin matrix, the "sandwich" structure is maintained. The result is a laminate with high strength and stiffness and low weight. On each side of this "sandwich" laminate additional reinforcement materials can be laminated and a synthetic foam can be injected in the hollow structure. This will allow to establish the mechanical properties of a finished product.

    Las pobres propiedades, tanto interlaminares como de adhesión entre piel y núcleo, constituyen uno de los grandes problemas cuando se diseñan estructuras utilizando paneles tipo "sandwich". Un nuevo tipo de panel "sandwich", configurado a partir de tejidos tridimensionales, está siendo desarrollado en la actualidad con el objetivo de eliminar esos problemas. Aunque el proceso de fabricación es muy simple, el panel "sandwich" obtenido es de estructura compleja, como resultado de la complejidad del tejido tridimensional utilizado. Este tejido tridimensional (3D es un tejido de fibra de vidrio producido en máquinas de tejer especializadas. La resistencia de las fibras verticales hace que, después de la impregnación con una resina, se mantenga la configuración tipo "sandwich". El resultado es un laminado de alta resistencia, gran rigidez y bajo peso. Sobre cada uno de los lados del panel "sandwich" se pueden

  2. New "sandwich" structures conformed from three dimensional

    OpenAIRE

    1996-01-01

    Poor interlaminar properties as well as poor-skin-to-core adhesion properties are very often the common existing problems we find when designing with "sandwich" structures. A new type of 3D-fabric "sandwich" structure is being developed in order to avoid these problems. Although the manufacturing process is very simple, a very complex "sandwich" structure is obtained as a result of the complexity of the 3D-fabric used. This 3D-fabric is a 3D woven glass fabric produced on velvet weaving machi...

  3. Systematic selection of modified aptamer pairs for diagnostic sandwich assays.

    Science.gov (United States)

    Ochsner, Urs A; Green, Louis S; Gold, Larry; Janjic, Nebojsa

    2014-01-01

    Protein diagnostic applications typically require pairs of analyte-specific reagents for capture and detection. We developed methods for the systematic isolation of slow off-rate modified aptamer (SOMAmer) reagents that bind to different epitopes and allow efficient pair-wise screening of multiple ligands. SOMAmers were generated via a second systematic evolution of ligands by exponential enrichment (SELEX), using complexes of target proteins with a primary, non-amplifiable SOMAmer and employing different modified nucleotides (e.g., naphthylmethyl- or tryptaminocarbonyl-dU) to favor alternate binding epitopes. Non-competing binding of primary and secondary SOMAmers was tested in radiolabel competition and sandwich binding assays. Multiplexed high-throughput screening for sandwich pairs utilized the Luminex platform, with primary SOMAmers as capture agents attached to different types of LumAvidin beads, which were then pooled for testing the secondary SOMAmers individually as detection agents. Functional SOMAmer pairs were obtained for Clostridium difficile binary toxin (CdtA) and for a panel of human proteins (ANGPT2, TSP2, CRDL1, MATN2, GPVI, C7, PLG) that had been previously identified as promising markers for cardiovascular risk. The equilibrium dissociation constants (Kd values) ranged from 0.02-2.7 nM, and the detection limits were in the low picomolar range for these proteins in SOMAmer sandwich assays. These results indicate that SOMAmer pairs hold promise for the development of rapid tests or specific diagnostic panels.

  4. Buckling driven debonding in sandwich columns

    DEFF Research Database (Denmark)

    Østergaard, Rasmus Christian

    2008-01-01

    A compression loaded sandwich column that contains a debond is analyzed using a geometrically non-linear finite element model. The model includes a cohesive zone along one face sheet/core interface whereby the debond can extend by interface crack growth. Two geometrical imperfections are introduced......; a global imperfection of the sandwich column axis and a local imperfection of the debonded face sheet axis. The model predicts the sandwich column to be very sensitive to the initial debond length and the local face sheet imperfection. The study shows that the sensitivity to the face sheet imperfection...... results from two mechanisms: (a) interaction of local debond buckling and global buckling and (b) the development of a damaged zone at the debond crack tip. Based on the pronounced imperfection sensitivity, the author predicts that an experimental measurement of the strength of sandwich structures may...

  5. Local slamming impact of sandwich composite hulls

    National Research Council Canada - National Science Library

    Qin, Z; Batra, R.C

    2009-01-01

    We develop a hydroelastic model based on a {3,2}-order sandwich composite panel theory and Wagner's water impact theory for investigating the fluid-structure interaction during the slamming process...

  6. On the Milnor fibers of sandwiched singularities

    OpenAIRE

    Nemethi, Andras; Popescu-Pampu, Patrick

    2009-01-01

    The sandwiched surface singularities are those rational surface singularities which dominate birationally smooth surface singularities. de Jong and van Straten showed that one can reduce the study of the deformations of a sandwiched surface singularity to the study of deformations of a 1-dimensional object, a so-called decorated plane curve singularity. In particular, the Milnor fibers corresponding to their various smoothing components may be reconstructed up to diffeomorphisms from those de...

  7. Sandwich-Type Theorems for a Class of Multiplier Transformations Associated with the Noor Integral Operators

    Directory of Open Access Journals (Sweden)

    Nak Eun Cho

    2012-01-01

    Full Text Available We obtain some subordination- and superordination-preserving properties for a class of multiplier transformations associated with Noor integral operators defined on the space of normalized analytic functions in the open unit disk. The sandwich-type theorems for these transformations are also considered.

  8. Devices, systems, and methods for conducting sandwich assays using sedimentation

    Energy Technology Data Exchange (ETDEWEB)

    Schaff, Ulrich Y; Sommer, Gregory J; Singh, Anup K; Hatch, Anson V

    2015-02-03

    Embodiments of the present invention are directed toward devices, systems, and method for conducting sandwich assays using sedimentation. In one example, a method includes generating complexes on a plurality of beads in a fluid sample, individual ones of the complexes comprising a capture agent, a target analyte, and a labeling agent. The plurality of beads including the complexes may be transported through a density media, wherein the density media has a density lower than a density of the beads and higher than a density of the fluid sample, and wherein the transporting occurs, at least in part, by sedimentation. Signal may be detected from the labeling agents of the complexes.

  9. Historically defined autobiographical periods

    DEFF Research Database (Denmark)

    Brown, Norman R.; Hansen, Tia G. B.; Lee, Peter J.;

    2012-01-01

    The chapter reviews a research programme that has demonstrated the existence of historically defined autobiographical periods and identified the conditions that bring them about. Data from four samples of World War II-generation adults show that historically defined autobiographical periods endure...... over time and theoretical implications are discussed, notably by introducing a new approach to autobiographical memory, Transition Theory, which assumes that autobiographical memory is organized by transitional events that can be selfinitiated or externally imposed - historically defined...

  10. Stability and post-buckling response of sandwich pipes under hydrostatic external pressure

    Energy Technology Data Exchange (ETDEWEB)

    Arjomandi, Kaveh [Department of Civil and Resource Engineering, Dalhousie University, 1360 Barrington Street, Halifax, NS B3J 1Z1 (Canada); Taheri, Farid, E-mail: farid.taheri@dal.ca [Department of Civil and Resource Engineering, Dalhousie University, 1360 Barrington Street, Halifax, NS B3J 1Z1 (Canada)

    2011-04-15

    Sandwich pipe systems can be considered as potentially optimum design configurations for overcoming the shortfalls of single-walled pipes for deep-water applications. This potential design alternative has gained considerable attention in recent years. In this paper the stability of these systems is investigated. The possible equilibrium paths are evaluated and the effect of the various significant parameters on the characteristic behavior of the system is discussed. The Finite Element (FE) software package ABAQUS is used to construct more than 3000 FE models of the sandwich pipes with practical configurations. Four design configurations are considered for the sandwich pipes with respect to the adhesion among the interfaces. The post-buckling behavior of each of these configurations is determined, with emphasis on a wide practical range of parameters. The behavior of these configurations is examined and the efficiency of each system is discussed. Finally, a simplified and fairly accurate equation is developed and recommended for calculating the pressure capacity of sandwich pipes. The parameters of the proposed equation are also fully defined. - Highlights: > The stability of sandwich pipes (SP) in deep water is investigated. > 3000 FE models of SP with practical configurations were constructed and analyzed. > The possible equilibrium paths are evaluated and the effect of the various significant parameters is discussed. > The interface core/pipe adhesion is also investigated and shown to have significant impact on the stability. > Finally, a simplified and fairly accurate equation is developed for calculating the pressure capacity of SP.

  11. Energy Dissipation in Sandwich Structures During Axial Compression

    DEFF Research Database (Denmark)

    Urban, Jesper

    2002-01-01

    The purpose of this paper is to investigate the energy dissipation in sandwich structures during axial crushing. Axial crushing tests on six sandwich elements are described. The sandwich elements consist of a polyurethane core and E-glass/Polyester skin. The elements compare to full-scale structu......The purpose of this paper is to investigate the energy dissipation in sandwich structures during axial crushing. Axial crushing tests on six sandwich elements are described. The sandwich elements consist of a polyurethane core and E-glass/Polyester skin. The elements compare to full...

  12. Define Project

    DEFF Research Database (Denmark)

    Munk-Madsen, Andreas

    2005-01-01

    "Project" is a key concept in IS management. The word is frequently used in textbooks and standards. Yet we seldom find a precise definition of the concept. This paper discusses how to define the concept of a project. The proposed definition covers both heavily formalized projects and informally...... organized, agile projects. Based on the proposed definition popular existing definitions are discussed....

  13. Vibro-acoustics of lightweight sandwich structures

    CERN Document Server

    Lu, Tianjian

    2014-01-01

    Vibro-Acoustics of Lightweight Sandwich Structures introduces the study of the coupled vibration and acoustic behavior of lightweight sandwich structures in response to harmonic force and sound pressure. This book focuses on the theoretical modeling and experimental investigation of lightweight sandwich structures in order to provide a predictive framework for vibro-acoustic characteristics of typical engineering structures. Furthermore, by developing solution tools, it concentrates on the influence of key systematic parameters leading to effective guidance for optimal structure design toward lightweight, high-stiffness and superior sound insulation capability. This book is intended for researchers, scientists, engineers and graduate students in mechanical engineering especially in structural mechanics, mechanics and acoustics. Fengxian Xin and Tianjian Lu both work at the School of Aerospace, Xi’an Jiaotong University.

  14. Novel 1-D Sandwich Photonic Bandgap Structure

    Institute of Scientific and Technical Information of China (English)

    庞云波; 高葆新

    2004-01-01

    A sandwich photonic bandgap (PBG) structure is a novel PBG structure whose periodic lattice is buried in the middle of a substrate. Neither drilling nor suspending the substrate is required, and the integrity of the ground plane is maintained. This paper presents several modification techniques for sandwich PBG structure fabrication. The forbidden gap can be improved by adopting the chirping technique, applying the tapering technique, enlarging the periodic elements, adjusting the location of the periodic lattice in the substrate, and using different dielectric media H-shape elements. A finite difference time domain method is applied to analyze the structures. Deep and wide stopbands can be obtained using the modified sandwich structures. Experimental measurement results agree well with the theoretical analysis.

  15. Behaviour of Metal Foam Sandwich Panels

    DEFF Research Database (Denmark)

    2011-01-01

    Sandwich panels as used in structures comprise of a foam core enclosed by thin high strength steel faces. This paper discusses currently design formulae of local buckling behaviour of such panels using the finite element method. Multiple wave finite element models were adopted to investigate...... and examine the adequacy of currently used approach for the design of sandwich panels. The paper presents brief details of the finite element model used including geometry, load pattern and boundary conditions. The selected model gives good agreement with experimental results from Pokharel and Mahendran (2003......). The study shows that currently available design formulae are conservative for stocky sandwich plate elements while being over-conservative for high slenderness. A unified design formula of local buckling behaviour applicable to the full range of slenderness is developed....

  16. Research on EM pulse protection property of plasma-microwave absorptive material-plasma sandwich structure

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    A plasma-microwave absorptive material (MAM)-plasma sandwich structure is presented to protect the electronic device against high power electromagnetic pulse. The model of electromagnetic wave reflected by and transmitting through the structure is established. Based on the characteristic parameters of plasma generated by discharge and usual MAM, the electromagnetic transmissive properties of the sandwich structure are investigated by the method of finite difference in time domain. The results indicate that in a rather broad frequency range, the electromagnetic attenuations by the structure are obviously better than the sum of attenuations resulted from plasma and MAM respectively. The models and results presented are instructive for electromagnetic pulse protection.

  17. Sandwiched confinement of quantum dots in graphene matrix for efficient electron transfer and photocurrent production

    DEFF Research Database (Denmark)

    Zhu, Nan; Zheng, Kaibo; J. Karki, Khadga

    2015-01-01

    matrix via interfacial self-assembly, leading to the formation of sandwiched hybrid QD-graphene nanofilms. We have explored structural features, electron transfer kinetics and photocurrent generation capacity of such hybrid nanofilms using a wide variety of advanced techniques. Graphene nanosheets...

  18. AA, sandwich line with magnetic horn

    CERN Multimedia

    1980-01-01

    The magnetic horn, focusing the antiprotons emanating from the target, was affixed to a sandwich line through which the 150 kA pulses were supplied. Expecting to have to change from time to time the fragile horn (inner conductor only 0.7 mm thick), the assembly was designed for quick exchange. At the lower end of the sandwich line we see the connectors for the high-current cables, at the upper end the magnet horn. It has just been lifted from the V-supports which held it aligned downstream of the target. Continue with 8010293.

  19. Hyperglucagonaemia analysed by glucagon sandwich ELISA

    DEFF Research Database (Denmark)

    Albrechtsen, Nicolai Jacob Wewer; Hartmann, Bolette; Veedfald, Simon

    2014-01-01

    characterised. The specific determination of fully processed, intact glucagon requires a 'sandwich' assay employing a combination of antibodies directed against both N- and C-termini. We compared a novel assay for intact glucagon with a highly sensitive C-terminal RIA (hitherto considered specific) to determine...... the extent to which the hyperglucagonaemia measured in clinical samples was caused by authentic glucagon. METHODS: We examined the performance of three commercial glucagon 'sandwich' ELISAs. The ELISA with the best overall performance was selected to compare glucagon measurements in clinical samples...

  20. Nonlinear dynamic analysis of sandwich panels

    Science.gov (United States)

    Lush, A. M.

    1984-01-01

    Two analytical techniques applicable to large deflection dynamic response calculations for pressure loaded composite sandwich panels are demonstrated. One technique utilizes finite element modeling with a single equivalent layer representing the face sheets and core. The other technique utilizes the modal analysis computer code DEPROP which was recently modified to include transverse shear deformation in a core layer. The example problem consists of a simply supported rectangular sandwich panel. Included are comparisons of linear and nonlinear static response calculations, in addition to dynamic response calculations.

  1. Advanced Mechanical Testing of Sandwich Materials

    DEFF Research Database (Denmark)

    Hayman, Brian; Berggreen, Christian; Jenstrup, Claus

    2008-01-01

    An advanced digital optical system has been used to measure surface strains on sandwich face and core specimens tested in a project concerned with improved criteria for designing sandwich X-joints. The face sheet specimens were of glass reinforced polyester and were tested in tension. The core...... specimens were of PVC foam and were tested in compression. The tests were performed in order to validate the use of the measurement system on these materials and to obtain material data for use in numerical simulations. While some limitations were identified, the optical system performed well and appears...

  2. Structural Response of Polyethylene Foam-Based Sandwich Panels Subjected to Edgewise Compression

    Directory of Open Access Journals (Sweden)

    Luciano Lamberti

    2013-10-01

    Full Text Available This study analyzes the mechanical behavior of low density polyethylene foam core sandwich panels subjected to edgewise compression. In order to monitor panel response to buckling, strains generated in the facesheets and overall out-of-plane deformations are measured with strain gages and projection moiré, respectively. A finite element (FE model simulating the experimental test is developed. Numerical results are compared with moiré measurements. After having been validated against experimental evidence, the FE model is parameterized, and a trade study is carried out to investigate to what extent the structural response of the panel depends on the sandwich wall construction and facesheet/core interface defects. The projection moiré set-up utilized in this research is able to capture the sudden and very localized buckling phenomena occurring under edgewise compression of foam-based sandwich panels. Results of parametric FE analyses indicate that, if the total thickness of the sandwich wall is fixed, including thicker facesheets in the laminate yields a larger deflection of the panel that becomes more sensitive to buckling. Furthermore, the mechanical response of the foam sandwich panel is found to be rather insensitive to the level of waviness of core-facesheet interfaces.

  3. Influence of residual stresses on the tensile strength of composite-metal sandwich laminates

    Science.gov (United States)

    Herakovich, C. T.; Wong, D. M.

    1977-01-01

    The tensile strength of boron-epoxy/aluminum sandwich laminates is discussed relative to the residual thermal stresses generated by curing and bonding at elevated temperatures. It is shown that the sandwich laminates investigated exhibit three dinstinct modes of failure, depending upon the fiber orientation of the composite. Sandwich laminates with moderate to high percentage of 0-deg fibers exhibit early failures initiated by edge effect; laminates with moderate to high percentage of 90-deg fibers fail according to a first-ply failure criterion; laminates with moderate to high percentages of plus or minus 45 deg plies fail at strains equal to or greater than the failure strain of the corresponding all-composite laminate.

  4. Thermo-Electro-Mechanical Analysis of a Curved Functionally Graded Piezoelectric Actuator with Sandwich Structure

    Directory of Open Access Journals (Sweden)

    Liying Jiang

    2011-12-01

    Full Text Available In this work, the problem of a curved functionally graded piezoelectric (FGP actuator with sandwich structure under electrical and thermal loads is investigated. The middle layer in the sandwich structure is functionally graded with the piezoelectric coefficient g31 varying continuously along the radial direction of the curved actuator. Based on the theory of linear piezoelectricity, analytical solutions are obtained by using Airy stress function to examine the effects of material gradient and heat conduction on the performance of the curved actuator. It is found that the material gradient and thermal load have significant influence on the electroelastic fields and the mechanical response of the curved FGP actuator. Without the sacrifice of actuation deflection, smaller internal stresses are generated by using the sandwich actuator with functionally graded piezoelectric layer instead of the conventional bimorph actuator. This work is very helpful for the design and application of curved piezoelectric actuators under thermal environment.

  5. Influence of Sandwich-Type Constrained Layer Damper Design Parameters on Damping Strength

    Directory of Open Access Journals (Sweden)

    Inaki Merideno

    2016-01-01

    Full Text Available This paper presents a theoretical study of the parameters that influence sandwich-type constrained layer damper design. Although there are different ways to reduce the noise generated by a railway wheel, most devices are based on the mechanism of increasing wheel damping. Sandwich-type constrained layer dampers can be designed so their resonance frequencies coincide with the wheel’s resonant vibration frequencies, and thus the damping effect can be concentrated within the frequency ranges of interest. However, the influence of design parameters has not yet been studied. Based on a number of numerical simulations, this paper provides recommendations for the design stages of sandwich-type constrained layer dampers.

  6. Thermo-Electro-Mechanical Analysis of a Curved Functionally Graded Piezoelectric Actuator with Sandwich Structure.

    Science.gov (United States)

    Yan, Zhi; Zaman, Mostafa; Jiang, Liying

    2011-12-12

    In this work, the problem of a curved functionally graded piezoelectric (FGP) actuator with sandwich structure under electrical and thermal loads is investigated. The middle layer in the sandwich structure is functionally graded with the piezoelectric coefficient g31 varying continuously along the radial direction of the curved actuator. Based on the theory of linear piezoelectricity, analytical solutions are obtained by using Airy stress function to examine the effects of material gradient and heat conduction on the performance of the curved actuator. It is found that the material gradient and thermal load have significant influence on the electroelastic fields and the mechanical response of the curved FGP actuator. Without the sacrifice of actuation deflection, smaller internal stresses are generated by using the sandwich actuator with functionally graded piezoelectric layer instead of the conventional bimorph actuator. This work is very helpful for the design and application of curved piezoelectric actuators under thermal environment.

  7. Plasmonic nanomesh sandwiches for ultrathin film silicon solar cells

    Science.gov (United States)

    Gao, Tongchuan; Wang, Baomin; Leu, Paul W.

    2017-02-01

    We theoretically investigate the strategy of integrating metal nanoparticles (NPs)/nanomeshes (NMs) into the top and/or bottom of crystalline silicon (c-Si) thin film solar cells for light trapping and enhanced carrier collection. C-Si thin films exhibit absorption resonances corresponding to Fabry-Pérot modes. Frontside metal NPs enhance absorption by additionally coupling light into localized surface plasmon resonances and c-Si waveguide modes, while a frontside metal NM increases absorption by coupling light into surface plasmon polaritons and c-Si waveguide modes. The frontside metal NM also functions as a flexible top electrode, which may replace conventional brittle transparent conductive oxide thin films. The backside metal NM exhibits enhanced absorption due to the coupling of light into c-Si waveguide modes and the cavity modes within the holes of metal NM. We illustrate how the optimal metal NM sandwich, consisting of NMs on both sides of a 300 nm thick c-Si with an appropriate antireflection coating (ARC), achieves a 72.9% enhancement in short-circuit current density compared with that of a 300 nm thick c-Si thin film solar cell with 100 nm thick Si3N4 ARC and 300 nm thick Ag back reflector. The current generation in the metal NM sandwich is more in the center of the thin film such that there should be less surface recombination. The uniform current generation throughout the film results in less overall recombination.

  8. Immunometric Double-Antibody Sandwich Enzyme-Linked Immunosorbent Assay.

    Science.gov (United States)

    Kohl, Thomas O; Ascoli, Carl A

    2017-06-01

    The double-antibody sandwich enzyme-linked immunosorbent assay (ELISA) is preferentially used to determine the concentration of unknown antibody in a sample. Pure antigen is not required in this assay; however, the use of a reporter-labeled detection antibody is essential. The double-antibody sandwich ELISA is suitable for epitope mapping of different monoclonal antibodies that have been generated against a single antigen. First, plates are coated with a capture antibody specific for immunoglobulins generated by immunization of a host species. Next, the test antibody solution (e.g., serum) is incubated with the capture antibody to facilitate binding. The plates are washed to remove unbound antibody, and then antigen is added. The plates are washed again followed by the addition of an antigen-specific reporter-labeled antibody. Following incubation, unbound reporter antibody is washed off, and reporter-specific substrate is added. Reporter-mediated substrate hydrolysis is visualized and measured. The signal is proportional to the number of test antibodies present in the serum. © 2017 Cold Spring Harbor Laboratory Press.

  9. New examples of sandwich gravitational waves and their impulsive limit

    CERN Document Server

    Podolsky, J

    1998-01-01

    Non-standard sandwich gravitational waves are constructed from the homogeneous pp vacuum solution and the motions of free test particles in the space-times are calculated explicitly. They demonstrate the caustic property of sandwich waves. By performing limits to impulsive gravitational wave it is demonstrated that the resulting particle motions are identical regardless of the ''initial'' sandwich.

  10. Non-linear analytical solutions for laterally loaded sandwich plates

    DEFF Research Database (Denmark)

    Riber, Hans Jørgen

    1997-01-01

    This work focuses on the response of orthotropic sandwich composite plates with large deflections due to high lateral loads. The results have special application to the design of ship structures. A geometrical nonlinear theory is outlined, on the basis of the classical sandwich plate theory...... of sandwich plates subjected to high lateral loading. (C) 1997 Published by Elsevier Science Ltd. All rights reserved....

  11. AA, sandwich line with magnetic horn

    CERN Document Server

    1980-01-01

    Continuation from 8010293: Finally, the sandwich line with the horn is placed on the ground, for the horn to be inspected and, if needed, exchanged for a new one. The whole procedure was trained with several members of the AA team, for quick and safe handling, and to share the radiation dose amongst them.

  12. Behaviour of Metal Foam Sandwich Panels

    DEFF Research Database (Denmark)

    2011-01-01

    Sandwich panels as used in structures comprise of a foam core enclosed by thin high strength steel faces. This paper discusses currently design formulae of local buckling behaviour of such panels using the finite element method. Multiple wave finite element models were adopted to investigate...

  13. Structural detailing of openings in sandwich panels

    NARCIS (Netherlands)

    Tomà, T.; Courage, W.

    1996-01-01

    European Recommendations exist which provide calculation rules to determine the strength and stiffness of sandwich panels composed of two metal faces with a foam in between. In case of openings in such panels (e.g. for windows) an influence will appear with regard to the stiffness and loadbearing ca

  14. X-joints in composite sandwich panels

    NARCIS (Netherlands)

    Vredeveldt, A.W.; Janssen, G.Th.M.

    1998-01-01

    The small structural weight of fast large ships such as fast mono hulls or catamaran type of ships is of extreme importance to their success. One possible light weight structural solution is the sandwich panel with fibre reinforced laminates and a balsa, honeycomb or foam core. A severe obstacle for

  15. Organometallic half-sandwich iridium anticancer complexes

    NARCIS (Netherlands)

    Liu, Z.; Habtemariam, A.; Pizarro, A.M.; Fletcher, S.A.; Kisova, A.; Vrana, O.; Salassa, L.; Bruijnincx, P.C.A.|info:eu-repo/dai/nl/33799529X; Clarkson, G.J.; Brabec, V.; Sadler, Peter J.

    2011-01-01

    The low-spin 5d6 IrIII organometallic half-sandwich complexes [(η5-Cpx)Ir(XY)Cl]0/+, Cpx = Cp*, tetramethyl(phenyl)cyclopentadienyl (Cpxph), or tetramethyl(biphenyl)cyclopentadienyl (Cpxbiph), XY = 1,10-phenanthroline (4−6), 2,2′-bipyridine (7−9), ethylenediamine (10 and 11), or picolinate (12−14),

  16. Feedback Sandwiches Affect Perceptions but Not Performance

    Science.gov (United States)

    Parkes, Jay; Abercrombie, Sara; McCarty, Teresita

    2013-01-01

    The feedback sandwich technique-make positive comments; provide critique; end with positive comments-is commonly recommended to feedback givers despite scant evidence of its efficacy. These two studies (N = 20; N = 350) of written peer feedback with third-year medical students on clinical patient note-writing assignments indicate that students…

  17. X-joints in composite sandwich panels

    NARCIS (Netherlands)

    Vredeveldt, A.W.; Janssen, G.Th.M.

    1998-01-01

    The small structural weight of fast large ships such as fast mono hulls or catamaran type of ships is of extreme importance to their success. One possible light weight structural solution is the sandwich panel with fibre reinforced laminates and a balsa, honeycomb or foam core. A severe obstacle for

  18. Determination of Peroxide Value of Edible Oils Used in Restaurants and Sandwich Shops in Yasuj in 2006

    Directory of Open Access Journals (Sweden)

    A Pourmahmoudi

    2008-04-01

    Full Text Available ABSTRACT: Introduction & Objective: Nowadays the extensive changes in lifestyle resulted in an increase in consumption of fast food. This type of food, because of using deep–fat frying, may contain some toxic or unfavorable substances which have adverse effects on consumers’ health. The aim of this study was to determine the peroxide value of edible oils which are used in restaurants and sandwich shops in Yasouj city. Materials & Methods: This descriptive study was carried out on all sandwich shops (n=36 and restaurants (n=12 in Yasuj city in 2006. All samples and questionnaire data in restaurants and sandwich shops were collected at 11:30am and 12:30pm respectively based on a national standard protocol, number 493, by a food expert. The peroxide value was determined based on national standard procedure, number 4179, in a food laboratory and the acceptable limit was defined as 7 meq/kg. Results: Findings of this study showed that in terms of health rules and regulations, at least 50% of oils used in restaurants and 70% in sandwich shops were unfavorable. Peroxide value of 58.3% of oils in restaurants and 97.3% in sandwich shops was greater than the acceptable limit. Conclusion: These findings have shown that the health rules and regulations for the oils are not exercised in Yasouj restaurants and sandwich shops and this can have adverse effects on consumers’ health.

  19. HYBRID-SANDWICHED REINFORCEMENT WITH GEOSYNTHETICS

    Science.gov (United States)

    Yasuhara, Kazuya; Yamazaki, Shinji; Sakakibara, Tsutomu

    Advantageous aspects of sandwich-type reinforced earth structures combined with geosynthetics and sand mat are highlighted in this paper. Those aspects were elucidated by two kinds of laboratory tests : (1) large consolidation tests for improvement of hydraulic conductivity and (2) model footing tests on improvement of bearing capacity and deformation characteristics for reinforced earth structures, including both vertical permeability and horizontal transmissibility characteristics of geosynthetics results from both laboratory tests indicated the following: i) Hydraulic conductivity of geosynthetics used for this type of earth reinforcement can be maintained for a long period. Such conductivity sometimes disappears, particularly because of clogging when geosynthetics are adopted in embankment construction using fine-grained soils. This fact indicates that the sand mats which are laid above and beneath geosynthetics play a salient role in preventing clogging of geosynthetics that occurs by intrusion of fines from cohesive soils. ii) Sandwich-type reinforcement combined with geosynthetics and sand mats increases stability and decreases deformation of earth structures. In particular, the sandwich structure is effective for providing toughness, which has remained an important issue for reducing infrastructural maintenance and costs. In the later part of the paper, conventionally available stability analysis was carried out to propose the design procedure for reinforced earth structures and at the same time numerical analysis was also conducted to ensure the applicability of the hybrid-sandwiched earth reinforcement newly proposed in the current paper. Finally, based on the horizontal placement by means of HBS described in the current paper, the vertical drain procedure using the sandwich structures for accelerating consolidation and increasing stability of soft soils is also suggested for the future research and investigation.

  20. Generation of Well-Defined Pairs of Silylamine on Highly Dehydroxylated SBA-15: Application to the Surface Organometallic Chemistry of Zirconium

    KAUST Repository

    Azzi, Joachim

    2012-11-01

    Design of a new well-defined surface organometallic species [O-(=Si–NH)2Zr(IV)Np2] has been obtained by reaction of tetraneopentyl zirconium (ZrNp4) on SBA-15 surface displaying mainly silylamine pairs [O-(=Si–NH2)2]. These surface species have been achieved by an ammonia treatment of a highly dehydroxylated SBA-15 at 1000°C (SBA-151000). This support is known to contain mainly strained reactive siloxane bridges (≡Si-O-Si≡)[1] along with a small amount of isolated plus germinal silanols =Si(OH)2. Chemisorption of ammonia occurs primarily by opening these siloxane bridges[2] to generate silanol/silylamine pairs [O-(=Si–NH2)(=SiOH)] followed by substitution of the remaining silanol. Further treatment using hexamethyldisilazane (HMDS) results in the protection of the isolated remaining silanol groups by formation of ≡Si-O-SiMe3 and =Si(OSiMe3)2 but leaves ≡SiNH2 untouched. After reaction of this functionalized surface with ZrNp4, this latter displays mainly a bi-podal zirconium neopentyl organometallic complex [O-(=Si–NH)2Zr(IV)Np2] which has been fully characterized by diverse methods such as infrared transmission spectroscopy, magic angle spinning solid state nuclear magnetic resonance, surface elemental analysis, small angle X-ray powder diffraction (XRD), nitrogen adsorption and energy filtered transmission electron microscopy (EFTEM). These different characterization tools unambiguously prove that the zirconium organometallic complex reacts mostly with silylamine pairs to give a bi-podal zirconium bis-neopentyl complex, uniformly distributed into the channels of SBA-151000. Therefore this new material opens a new promising research area in Surface Organometallic Chemistry which, so far, was dealing mainly with O containing surface. It is expected that vicinal amine functions may play a very different role as compared with classical inorganic supports. Given the importance in the last decades of N containing ligands in catalysis, one may expect

  1. Impact Delamination and Fracture in Aluminum/Acrylic Sandwich Plates

    Science.gov (United States)

    Liaw, Benjamin; Zeichner, Glenn; Liu, Yanxiong; Bowles, Kenneth J. (Technical Monitor)

    2000-01-01

    Impact-induced delamination and fracture in 6061-T6 aluminum/cast acrylic sandwich plates adhered by epoxy were generated in an instrumented drop-weight impact machine. Although only a small dent was produced on the aluminum side when a hemispherical penetrator tup was dropped onto it from a couple of inches, a large ring of delamination at the interface was observed. The delamination damage was often accompanied by severe shattering in the acrylic substratum. Damage patterns in the acrylic layer include radial and ring cracks and, together with delamination at the interface, may cause peeling-off of acrylic material from the sandwich plate. Theory of stress-wave propagation can be used to explain these damage patterns. The impact tests were conducted at various temperatures. The results also show clearly that temperature effect is very important in impact damage. For pure cast acrylic nil-ductile transition (NDT) occurs between 185-195 F. Excessive impact energy was dissipated into fracture energy when tested at temperature below this range or through plastic deformation when tested at temperature above the NDT temperature. Results from this study will be used as baseline data for studying fiber-metal laminates, such as GLARE and ARALL for advanced aeronautical and astronautical applications.

  2. Defining excellence.

    Science.gov (United States)

    Mehl, B

    1993-05-01

    Excellence in the pharmacy profession, particularly pharmacy management, is defined. Several factors have a significant effect on the ability to reach a given level of excellence. The first is the economic and political climate in which pharmacists practice. Stricter controls, reduced resources, and the velocity of change all necessitate nurturing of values and a work ethic to maintain excellence. Excellence must be measured by the services provided with regard to the resources available; thus, the ability to achieve excellence is a true test of leadership and innovation. Excellence is also time dependent, and today's innovation becomes tomorrow's standard. Programs that raise the level of patient care, not those that aggrandize the profession, are the most important. In addition, basic services must be practiced at a level of excellence. Quality assessment is a way to improve care and bring medical treatment to a higher plane of excellence. For such assessment to be effective and not punitive, the philosophy of the program must be known, and the goal must be clear. Excellence in practice is dependent on factors such as political and social norms, standards of practice, available resources; perceptions, time, the motivation to progress to a higher level, and the continuous innovation required to reshape the profession to meet the needs of society.

  3. Optimal Design of Multistage Two-Dimensional Cellular-Cored Sandwich Panel Heat Exchanger

    Directory of Open Access Journals (Sweden)

    Yongcun Zhang

    2014-08-01

    Full Text Available For a two-dimensional (2D cellular-cored sandwich panel heat exchanger, there exists an optimum cell size to achieve the maximum heat transfer with the prescribed pressure drop when the length is fixed and the two plates are isothermal. However, in engineering design, it is difficult to find 2D cellular materials with the ideal cell size because the cell size selected must be from those commercially available, which are discrete, not continuous. In order to obtain the maximum heat dissipation, an innovative design scheme is proposed for the sandwich panel heat exchanger which is divided into multiple stages in the direction of fluid flow where the 2D cellular material in each stage has a specific cell size. An analytical model is presented to evaluate the thermal performance of the multistage sandwich panel heat exchanger when all 2D cellular materials have the same porosity. Also, a new parameter named equivalent cell size (ECS is defined, which is dependent on the cell size and length of cellular material in all stages. Results show that the maximum heat dissipation design of the multistage sandwich panel heat exchanger can be converted to make the ECS equal to the optimal cell size of the single-stage exchanger.

  4. Utilization of Bamboo as Lightweight Sandwich Panels

    Directory of Open Access Journals (Sweden)

    Suthon SRIVARO

    2016-05-01

    Full Text Available Lightweight sandwich panels consisting of bamboo faces and oil palm trunk core were manufactured using melamine urea formaldehyde with the resin content of 250 g/m2 (solid basis. The parameters examined were node and density of bamboo faces. Physical (board density, thickness swelling and water absorption and mechanical (modulus of elasticity and modulus of rupture properties of the sandwich board obtained were investigated and compared with other bamboo products and commercial wood based products. Result showed that this panel had better dimensional stability than those of other bamboo products but lower bending strength. Node of bamboo had no significant effect on any board properties examined. Most of board properties were influenced by bamboo face density. Comparing the properties to commercial wood based products, this panel could be used as wall/floor applications.

  5. Buckling optimisation of sandwich cylindrical panels

    Science.gov (United States)

    Abouhamzeh, M.; Sadighi, M.

    2016-06-01

    In this paper, the buckling load optimisation is performed on sandwich cylindrical panels. A finite element program is developed in MATLAB to solve the governing differential equations of the global buckling of the structure. In order to find the optimal solution, the genetic algorithm Toolbox in MATLAB is implemented. Verifications are made for both the buckling finite element code and also the results from the genetic algorithm by comparisons to the results available in literature. Sandwich cylindrical panels are optimised for the buckling strength with isotropic or orthotropic cores with different boundary conditions. Results are presented in terms of stacking sequence of fibers in the face sheets and core to face sheet thickness ratio.

  6. Utilization of Bamboo as Lightweight Sandwich Panels

    Directory of Open Access Journals (Sweden)

    Suthon SRIVARO

    2016-05-01

    Full Text Available Lightweight sandwich panels consisting of bamboo faces and oil palm trunk core were manufactured using melamine urea formaldehyde with the resin content of 250 g/m2 (solid basis. The parameters examined were node and density of bamboo faces. Physical (board density, thickness swelling and water absorption and mechanical (modulus of elasticity and modulus of rupture properties of the sandwich board obtained were investigated and compared with other bamboo products and commercial wood based products. Result showed that this panel had better dimensional stability than those of other bamboo products but lower bending strength. Node of bamboo had no significant effect on any board properties examined. Most of board properties were influenced by bamboo face density. Comparing the properties to commercial wood based products, this panel could be used as wall/floor applications.

  7. Detecting and identifying damage in sandwich polymer composite by using acoustic emission

    Energy Technology Data Exchange (ETDEWEB)

    McGugan, M.; Soerensen, Bent F.; Oestergaard, R.; Bech, T.

    2006-12-15

    Acoustic emission is a useful monitoring tool for extracting extra information during mechanical testing of polymer composite sandwich materials. The study of fracture mechanics within test specimens extracted from wind turbine blade material is presented. The contribution of the acoustic emission monitoring technique in defining different failure modes identified during the testing is discussed. The development of in-situ structural monitoring and control systems is considered. (au)

  8. A spiral antenna sandwiched by dielectric layers

    OpenAIRE

    Nakano, Hisamatsu; Ikeda, Masakazu; Hitosugi, Kazuo; Yamauchi, Junji

    2004-01-01

    An infinitesimally thin spiral antenna, sandwiched by bottom and top dielectric layers having the same relative permittivity, is analyzed under the condition that the dielectric layers are of finite extent and the antenna is backed by an infinite conducting plane. As the thickness of the top dielectric layer increases, the input impedance and axial ratio (AR) vary in an oscillatory fashion, with a period slightly larger than one-half of the guided wavelength of a wave propagating in an unboun...

  9. Self-healing sandwich composite structures

    Science.gov (United States)

    Fugon, D.; Chen, C.; Peters, K.

    2012-04-01

    Previous research demonstrated that a thin self-healing layer is effective in recovering partial sandwich composite performance after an impact event. Many studies have been conducted that show the possibility of using Fiber Bragg Grating (FBG) sensors to monitor the cure of a resin through strain and temperature monitoring. For this experiment, FBG sensors were used to monitor the curing process of a self-healing layer within a twelve-layer fiberglass laminate after impact. First, five self-healing sandwich composite specimens were manufactured. FBG sensors were embedded between the fiberglass and foam core. Then the fiberglass laminate was impacted with the use of a drop tower and the curing process was monitored. The collected data was used to compare the cure of the resin and fiberglass alone to the cure of the resin from a self-healing specimen. For the low viscosity resin system tested, these changes were not sufficiently large to identify different polymerization states in the resin as it cured. These results indicate that applying different resin systems might increase the efficiency of the self-healing in the sandwich composites.

  10. Mixed auxeticity of auxetic sandwich structures

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Teik-Cheng [SIM University, Singapore (Singapore)

    2012-07-15

    Previously, a sandwich structure in which the Poisson ratios of the core and facesheets possess opposite signs has been shown to exhibit overall conventional and auxetic behavior depending on the loading mode - axial loading or bending - for an intermediate range of relative core thickness. In addition to these two loading modes, sandwich structures in aerospace applications encounter torsional loads. In this paper, the effective Poisson's ratio for torsional loading is proposed. Results show that, depending on the loading mode and the relative core thickness, there can be up to four levels of overall auxeticity, namely (i) full auxeticity (FA) if the structure behaves as an auxetic structure under all three modes of loading, (ii) high auxeticity (HA) if the structure behaves as an auxetic structure in two of the loading modes, (iii) low auxeticity (LA) if the structure behaves as an auxetic structure in only one of the loading modes, and (iv) no auxeticity (NA) if the structure behaves as a conventional structure under all of the three loading modes. These results indicate that by selecting the Poisson's ratios and the thickness of the cores and facesheets, the sandwich structure can be made to respond differently under different external loading conditions. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  11. Analysis of propagation characteristics of flexural wave in honeycomb sandwich panel and design of loudspeaker for radiating inclined sound

    Science.gov (United States)

    Fujii, Ayaka; Wakatsuki, Naoto; Mizutani, Koichi

    2015-07-01

    A loudspeaker for an auditory guiding system is proposed. This loudspeaker utilizes inclined sound transformed from a flexural wave in a honeycomb sandwich panel. We focused on the fact that the inclined sound propagates extensively with uniform level and direction. Furthermore, sound can be generated without group delay dispersion because the phase velocity of the flexural wave in the sandwich panel becomes constant with increasing frequency. These characteristics can be useful for an auditory guiding system in public spaces since voice-guiding navigation indicates the right direction regardless of position on a pathway. To design the proposed loudspeaker, the behavior of the sandwich panel is predicted using a theoretical equation in which the honeycomb core is assumed as an orthotropic continuum. We calculated the phase velocity dispersion of the flexural wave in the sandwich panel and compared the results obtained using the equation with those of a simulation based on the finite element method and an experiment in order to confirm the applicability of the theoretical equation. It was confirmed that the phase velocities obtained using the theoretical equation and by the simulation were in good agreement with that obtained experimentally. The obtained results suggest that the behavior of the sandwich panel can be predicted using the parameters of the panel. In addition, we designed an optimized honeycomb sandwich panel for radiating inclined sound by calculating the phase velocity characteristics of various panels that have different parameters of core height and cell size using the theoretical equation. Sound radiation from the optimized panel was simulated and compared with that of a homogeneous plate. It was clear that the variance of the radiation angle with varying frequency of the optimized panel was smaller than that of the homogeneous plate. This characteristic of sound radiation with a uniform angle is useful for indicating the destination direction. On

  12. Design of an electro-Fenton system with a novel sandwich film cathode for wastewater treatment.

    Science.gov (United States)

    Fan, Yan; Ai, Zhihui; Zhang, Lizhi

    2010-04-15

    In this study, we demonstrate an electro-Fenton (E-Fenton) system constructed with a novel sandwich film cathode (SFC). For the fabrication of SFC, Fe(2+)-chitosan (Fe-CHI) was first deposited on foam nickel (Fe-CHI/Ni). Then two pieces of Fe-CHI/Ni was used to fasten one piece of activated carbon fiber (ACF) to obtain a Fe-CHI/Ni|ACF|Fe-CHI/Ni sandwich film cathode. We interestingly found that this SFC based E-Fenton system could effectively degrade rodamine B with in situ generating both hydrogen peroxide and iron ions. Its degradation efficiency was significantly higher than those of the E-Fenton systems constructed with composite cathodes of carbon nanotubes with Fe@Fe(2)O(3) core-shell nanowires or Cu(2)O nanocubes reported in our previous studies. Hydrogen peroxide electrogenerated through the reduction of O(2) adsorbed on the sandwich film cathode and the iron ions produced by the leakage from Fe(2+)-chitosan film during the E-Fenton reaction were, respectively, monitored, providing clues to understand the high efficiency of this novel SFC based E-Fenton system. More importantly, this low-cost sandwich film cathode was very stable and could be reused without catalytic activity decrease, suggesting its potential application in the wastewater treatment.

  13. Unique Sandwiched Carbon Sheets@Ni-Mn Nanoparticles for Enhanced Oxygen Evolution Reaction.

    Science.gov (United States)

    Zhang, Yan; Zhang, Huijuan; Yang, Jiao; Bai, Yuanjuan; Qiu, Huajun; Wang, Yu

    2016-05-11

    A unique sandwich-like architecture, where Ni-Mn nanoparticles are enveloped in coupled carbon sheets (CS@Ni-Mn), has been successfully fabricated. In the synthesis process, a great quantity of uniform NiMnO3 nanosheets generated by a universal hydrothermal method acts as precursors and templates and the cheap, environmentally friendly and recyclable glucose functions as a green carbon source. Via subsequent hydrothermal reaction and thermal annealing, sandwiched nanocomposites with Ni-Mn nanoparticles embedded inside and carbon sheets encapsulating outside can be massively prepared. The novel sandwich-like CS@Ni-Mn possesses numerous advantages, such as an intrinsic porous feature, large specific surface area, and enhanced electronic conductivity. Moreover, as a promising NiMn-based oxygen evolution reaction (OER) catalyst, the special sandwiched nanostructure demonstrates improved electrochemical properties in 1 M KOH, including a low overpotential of about 250 mV, a modest Tafel slope of 40 mV dec(-1), excellent stability over 2000 cycles, and durability for 40 h.

  14. Response of Composite Fuselage Sandwich Side Panels Subjected to Internal Pressure and Axial Tension

    Science.gov (United States)

    Rouse, Marshall; Ambur, Damodar R.; Dopker, Bernard; Shah, Bharat

    1998-01-01

    The results from an experimental and analytical study of two composite sandwich fuselage side panels for a transport aircraft are presented. Each panel has two window cutouts and three frames and utilizes a distinctly different structural concept. These panels have been evaluated with internal pressure loads that generate biaxial tension loading conditions. Design limit load and design ultimate load tests have been performed on both panels. One of the sandwich panels was tested with the middle frame removed to demonstrate the suitability of this two-frame design for supporting the prescribed biaxial loading conditions with twice the initial frame spacing of 20 inches. A damage tolerance study was conducted on the two-frame panel by cutting a notch in the panel that originates at the edge of a cutout and extends in the panel hoop direction through the window-belt area. This panel with a notch was tested in a combined-load condition to demonstrate the structural damage tolerance at the design limit load condition. Both the sandwich panel designs successfully satisfied all desired load requirements in the experimental part of the study, and experimental results from the two-frame panel with and without damage are fully explained by the analytical results. The results of this study suggest that there is potential for using sandwich structural concepts with greater than the usual 20-in. wide frame spacing to further reduce aircraft fuselage structural weight.

  15. Thermal conductivity of newspaper sandwiched aerated lightweight concrete panel

    Energy Technology Data Exchange (ETDEWEB)

    Ng, Soon-Ching; Low, Kaw-Sai [Faculty of Engineering and Science, Universiti Tunku Abdul Rahman, Jalan Genting Kelang, Setapak, 53300 Kuala Lumpur, Wilayah Persekutuan (Malaysia)

    2010-12-15

    Investigation on the thermal conductivity of newspaper sandwiched aerated lightweight concrete (ALC) panels is the main purpose of this study. Various densities of ALC panels ranging from 1700, 1400 and 1100 kg/m{sup 3} with three different aerial intensities of newspaper sandwiched were produced. Investigation was limited to the effect of aerial intensity of newspaper sandwiched and the effect of density of ALC on thermal conductivity. It is found that the thermal conductivity of newspaper sandwiched ALC panels reduced remarkably compared to control ALC panels. The reduction was recorded at 18.0%, 21.8% and 20.7% correspond to densities of 1700, 1400 and 1100 kg/m{sup 3} with just a mere 0.05 g/cm{sup 2} aerial intensity of newspaper sandwiched. Newspaper sandwiched has a significant impact on the performance of thermal conductivity of ALC panels based on regression analysis. (author)

  16. Design Analysis of the Mixed Mode Bending Sandwich Specimen

    DEFF Research Database (Denmark)

    Quispitupa, Amilcar; Berggreen, Christian; Carlsson, Leif A.

    2010-01-01

    A design analysis of the mixed mode bending (MMB) sandwich specimen for face–core interface fracture characterization is presented. An analysis of the competing failure modes in the foam cored sandwich specimens is performed in order to achieve face–core debond fracture prior to other failure modes....... The analysis facilitates selection of the appropriate geometry for the MMB sandwich specimen to promote debond failure. An experimental study is performed using MMB sandwich specimens with a H100 PVC foam core and E-glass–polyester faces. The results reveal that debond propagation is successfully achieved...... for the chosen geometries and mixed mode loading conditions....

  17. Influence of plywood grain direction on sandwich panel bending properties

    OpenAIRE

    Jaroslav Kljak; Mladen Brezović; Alan Antonović

    2009-01-01

    This paper investigates the influence of plywood grain direction on bending properties of a sandwich panel, as well as on stress distribution in each layer. Experimental sandwich panels (tnom= 29 mm) were made of two three-ply plywood panels and a rigid PVC core between them. Grain directions of plywood panels were between 0° and 90°, continuously raised by 15°. Seven models of sandwich panels were made. Bending properties of a sandwich panel was determined by three point bending method and s...

  18. Buckling Analysis of Debonded Sandwich Panel Under Compression

    Science.gov (United States)

    Sleight, David W.; Wang, John T.

    1995-01-01

    A sandwich panel with initial through-the-width debonds is analyzed to study the buckling of its faceskin when subject to an in-plane compressive load. The debonded faceskin is modeled as a beam on a Winkler elastic foundation in which the springs of the elastic foundation represent the sandwich foam. The Rayleigh-Ritz and finite-difference methods are used to predict the critical buckling load for various debond lengths and stiffnesses of the sandwich foam. The accuracy of the methods is assessed with a plane-strain finite-element analysis. Results indicate that the elastic foundation approach underpredicts buckling loads for sandwich panels with isotropic foam cores.

  19. Analytical determination of the ultimate strength of sandwich beams

    Science.gov (United States)

    Theotokoglou, Efstathios E.

    1996-09-01

    An analytical determination of the ultimate strength of a typical GRP/PVC sandwich beam has been performed. These beams represent common building practise in marine applications. Equations describing the behaviour of a sandwich panel under beam loading and various failure modes have been developed. The method has been applied to predict the ultimate load for a simple supported sandwich beam. The critical loads have been compared with those from the experimental investigation of a typical bulkhead-to-hull GRP/PVC sandwich T-joint under pull out forces.

  20. Elastic constants for superplastically formed/diffusion-bonded sandwich structures

    Science.gov (United States)

    Ko, W. L.

    1979-01-01

    Formulae and the associated graphs are presented for contrasting the effective elastic constants for a superplastically formed/diffusion-bonded (SPF/DB) corrugated sandwich core and a honeycomb sandwich core. The results used in the comparison of the structural properties of the two types of sandwich cores are under conditions of equal sandwich density. It was found that the stiffness in the thickness direction of the optimum SPF/DB corrugated core (i.e., triangular truss core) was lower than that of the honeycomb core, and that the former had higher transverse shear stiffness than the latter.

  1. Selective Hydrogen Generation from Formic Acid with Well-Defined Complexes of Ruthenium and Phosphorus-Nitrogen PN(3) -Pincer Ligand.

    Science.gov (United States)

    Pan, Yupeng; Pan, Cheng-Ling; Zhang, Yufan; Li, Huaifeng; Min, Shixiong; Guo, Xunmun; Zheng, Bin; Chen, Hailong; Anders, Addison; Lai, Zhiping; Zheng, Junrong; Huang, Kuo-Wei

    2016-05-01

    An unsymmetrically protonated PN(3) -pincer complex in which ruthenium is coordinated by one nitrogen and two phosphorus atoms was employed for the selective generation of hydrogen from formic acid. Mechanistic studies suggest that the imine arm participates in the formic acid activation/deprotonation step. A long life time of 150 h with a turnover number over 1 million was achieved.

  2. Adjuvant chemo-radiotherapy in the "sandwich" method for high risk endometrial cancer--a review of literature.

    Science.gov (United States)

    Bie, Yachun; Zhang, Zhenyu; Wang, Xiaolan

    2015-06-24

    Endometrial cancer is a common female malignancy. Patients with high-risk endometrial cancer have relatively high incidence of metastasis and recurrence. Despite complete resection, patients with stage III or IV are at high risk of local or distant recurrence. Systemic adjuvant treatment includes chemotherapy and radiotherapy. But the optimal scheduling is not known. Recently proposed sequential chemo-radiotherapy as sandwich therapy for high risk endometrial cancer have yielded encouraging results. This article is to review the adjuvant chemo-radiotherapy in the "sandwich" method for high risk endometrial cancer to help clinicians identify the most effective adjuvant treatment for patients with high risks of it. We used MEDLINE, EMBASE, Cochrane Library and CBM databases to search the literature. A systematic review was made. And most data showed "sandwich" therapy is feasible, efficacious, well-tolerated and resulted in excellent long-term progression free and overall survival in the setting of advanced endometrial cancer. Randomized trials are necessary to compare chemo-radio therapy given in the "sandwich" fashion to other means of sequencing these treatment modalities. It is also necessary to define which population is best suited for "sandwich" adjuvant therapy.

  3. Generations.

    Science.gov (United States)

    Chambers, David W

    2005-01-01

    Groups naturally promote their strengths and prefer values and rules that give them an identity and an advantage. This shows up as generational tensions across cohorts who share common experiences, including common elders. Dramatic cultural events in America since 1925 can help create an understanding of the differing value structures of the Silents, the Boomers, Gen Xers, and the Millennials. Differences in how these generations see motivation and values, fundamental reality, relations with others, and work are presented, as are some applications of these differences to the dental profession.

  4. Selective Hydrogen Generation from Formic Acid with Well-Defined Complexes of Ruthenium and Phosphorus-Nitrogen PN3-Pincer Ligand

    KAUST Repository

    Pan, Yupeng

    2016-04-22

    An unsymmetrically protonated PN3-pincer complex in which ruthenium is coordinated by one nitrogen and two phosphorus atoms was employed for the selective generation of hydrogen from formic acid. Mechanistic studies suggest that the imine arm participates in the formic acid activation/deprotonation step. A long life time of 150 h with a turnover number over 1 million was achieved. Grabbing hold: A PN3-pincer complex was employed for the selective hydrogen generation from formic acid. Mechanistic studies suggest the imine arm participates in the formic acid activation/deprotonation step. A long life time of 150 h with a turnover number over 1 million was achieved. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. A double-sandwich ELISA for identification of monoclonal antibodies suitable for sandwich immunoassays

    Science.gov (United States)

    The sandwich immunoassay (sIA) is an invaluable technique for concentrating, detecting, and quantifying target antigens. The two critical components required are a capture antibody and a detection antibody, each binding a different epitope on the target antigen. The specific antibodies incorporated...

  6. On curves on sandwiched surface singularities

    OpenAIRE

    Fernandez-Sanchez, Jesus

    2007-01-01

    Fixed a point O on a non-singular surface S and a complete mO-primary ideal I in its local ring, the curves on the surface X obtained by blowing-up I are studied in terms of the base points of I. Criteria for the principality of these curves are obtained. New formulas for their multiplicity, intersection numbers and order of singularity at the singularities of X are given. The semigroup of branches going through a sandwiched singularity is effectively determined, too.

  7. Failure modes of composite sandwich beams

    Directory of Open Access Journals (Sweden)

    Gdoutos E.

    2008-01-01

    Full Text Available A thorough investigation of failure behavior of composite sandwich beams under three-and four-point bending was undertaken. The beams were made of unidirectional carbon/epoxy facings and a PVC closed-cell foam core. The constituent materials were fully characterized and in the case of the foam core, failure envelopes were developed for general two-dimensional states of stress. Various failure modes including facing wrinkling, indentation failure and core failure were observed and compared with analytical predictions. The initiation, propagation and interaction of failure modes depend on the type of loading, constituent material properties and geometrical dimensions.

  8. Recent trends in aluminum foam sandwich technology

    Energy Technology Data Exchange (ETDEWEB)

    Banhart, John [TU Berlin, Materials Science and Technology, Hardenbergstr. 36, 10623 Berlin (Germany); Helmholtz-Centre Berlin, Hahn-Meitner-Platz, 14109 Berlin (Germany); Seeliger, Hans-Wolfgang [Pohltec Metalfoam GmbH, Robert-Bosch-Str. 6D, 50769 Koeln (Germany)

    2012-12-15

    We review the status of aluminum foam sandwich (AFS) technology and discuss both recent improvements of foaming technology and current application strategies. It is concluded that the quality of foams has improved in the past years but the costs are still very much the same. This is why applications in which metal foams have more than one function are more likely to be economically viable. The examples presented include electromagnetic shielding, carrier plates for mirrors, cooking equipment, architectural panels, and blast protection. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  9. Generation of eye field/optic vesicle-like structures from human embryonic stem cells under two-dimensional and chemically defined conditions.

    Science.gov (United States)

    Parvini, Maryam; Parivar, Kazem; Safari, Fatemeh; Tondar, Mahdi

    2015-03-01

    Despite the enormous progress in studying retinal cell differentiation from human embryonic stem cells (hESCs), none of the reported protocols have produced a cost-effective eye field cells with the capability to further differentiate into retinal derivatives. In this study, by drawing chemicals on our four-step differentiation strategy, we demonstrated the ability of hESCs in assembling such qualifications to follow human retinogenesis in a serum- and feeder-free adherent condition. Two-dimensional (2D) populations of eye field cells arose within early forebrain progeny upon hESCs differentiation. Gene expression analysis showed that the treatment of hESCs with a combination of selected small molecules (SMs) gave rise to the higher expressions of eye field-specific genes, PAX6, RX, and SIX3. Thereafter, a subset of cells gained the transient features of advancing retinal differentiation, including optic vesicle (OV)-like structures, which expressed MITF and CHX10 in a manner imitated in vivo human retinal development. The competency of derived cells in differentiation to retinal derivatives was further investigated. The gene analysis of the cells showed more propensity for generating retinal pigment epithelial (RPE) than neural retina (NR). The generation of OV-like structures in 2D cultures can shed light on molecular events governing retinal specification. It can also facilitate the study of human retinal development.

  10. Dynamic Failure of Composite and Sandwich Structures

    CERN Document Server

    Abrate, Serge; Rajapakse, Yapa D S

    2013-01-01

    This book presents a broad view of the current state of the art regarding the dynamic response of composite and sandwich structures subjected to impacts and explosions. Each chapter combines a thorough assessment of the literature with original contributions made by the authors.  The first section deals with fluid-structure interactions in marine structures.  The first chapter focuses on hull slamming and particularly cases in which the deformation of the structure affects the motion of the fluid during the water entry of flexible hulls. Chapter 2 presents an extensive series of tests underwater and in the air to determine the effects of explosions on composite and sandwich structures.  Full-scale structures were subjected to significant explosive charges, and such results are extremely rare in the open literature.  Chapter 3 describes a simple geometrical theory of diffraction for describing the interaction of an underwater blast wave with submerged structures. The second section addresses the problem of...

  11. Sandwich materials for wind turbine blades

    Energy Technology Data Exchange (ETDEWEB)

    Thybo Thomsen, O. [Aalborg Univ., Dept. of Mechanical Engineering, Aalborg (Denmark)

    2006-07-01

    Wind turbine blades are being manufactured using polymer matrix composite materials (PMC), in a combination of monolithic (single skin) and sandwich composites. Present day designs are mainly based on glass fibre reinforced composites (GFRP), but for very large blades carbon fibre reinforced composites (CFRP) are being used increasingly, in addition to GFRP by several manufacturers to reduce the weight. The size of wind turbines have increased significantly over the last 25 years, and this trend is expected to continue in the future. Thus, it is anticipated that wind turbines with a rated power output in the range of 8-10 MW and a rotor diameter about 170-180 m will be developed and installed within the next 10-15 years. The paper presents an overview of current day design principles and materials technology applied for wind turbine blades, and it highlights the limitations and important design issues to be addressed for up-scaling of wind turbine blades from the current maximum length in excess of 61 m to blade lengths in the vicinity of 90 m as envisaged for future very large wind turbines. In particular, the paper discusses the potential advantages and challenges of applying sandwich type construction to a larger extent than is currently being practiced for the load carrying parts of wind turbine blades. (au)

  12. Quantum radiation from a sandwich black hole

    Science.gov (United States)

    Frolov, Valeri P.; Zelnikov, Andrei

    2017-02-01

    We discuss quantum radiation of a massless scalar field from a spherically symmetric nonsingular black hole with a finite lifetime. Namely, we discuss a sandwich black-hole model, where a black hole is originally created by a collapse of a null shell of mass M , and later, after some time Δ V , it is disrupted by the collapse of the other shell with negative mass -M . We assume that between the shells the metric is static and either coincides with the Hayward metric or with a special generalization of it. We show that in both cases for a sufficiently large parameter Δ V the radiation after the formation of the black hole practically coincides with the Hawking result. We also calculate the radiation, emitted from the black hole interior. This radiation contains a peak at the moment when the second shell intersects the inner horizon. In the standard sandwich metric (with the Hayward interior) this outburst of energy is exponentially large. In the modified metric, which includes an additional nontrivial redshift parameter, this exponent is suppressed. This is a result of a significant decrease of the surface gravity of the inner horizon in the latter case. We discuss possible consequences of this result in the context of the self-consistency requirement for nonsingular models with quantum radiation.

  13. Fracture Analysis of Debonded Sandwich Columns Under Axial Compression

    DEFF Research Database (Denmark)

    May, A.; Avilés, F.; Berggreen, Christian

    A sandwich structure consists of two strong and stiff face sheets bonded to a weak low density core. The large separation between the face sheets provides increased bending rigidity and strength at low weight cost. Thus, sandwich structures frequently present better mechanical properties than mon...

  14. Practical Instruction in Tissue Culture and Cytogenetics for Sandwich Students.

    Science.gov (United States)

    Williams, D. C.; Bishun, N. P.

    1973-01-01

    Describes the training and practical techniques taught to students involved in a sandwich course at the Tissue Culture and Cytogenetics Unit of the Marie Curie Memorial Foundation, Surrey, England. Students spend a minimum of six months involved in the sandwich course before returning to university for a final academic year. (JR)

  15. Query processing of pre-partitioned data using Sandwich Operators

    NARCIS (Netherlands)

    Baumann, S.; Boncz, P.A.; Sattler, K.-U.

    2012-01-01

    In this paper we present the Sandwich Operators, an elegant approach to exploit pre-sorting or pre-grouping from clustered storage schemes in operators such as Aggregation/Grouping, HashJoin, and Sort of a database management system. Thereby, each of these operator types is "sandwiched" by two new o

  16. Tailoring Sandwich Face/Core Interfaces for Improved Damage Tolerance

    DEFF Research Database (Denmark)

    Lundsgaard-Larsen, Christian; Berggreen, Christian; Carlsson, Leif A.

    2010-01-01

    Various modifications of the face/core interface in foam core sandwich specimens are examined in a series of two papers. This paper constitutes part I and describes the finite element analysis of a sandwich test specimen, i.e. a DCB specimen loaded by uneven bending moments (DCB-UBM). Using...

  17. Tailoring Sandwich Face/Core Interfaces for Improved Damage Tolerance

    DEFF Research Database (Denmark)

    Lundsgaard-Larsen, Christian; Berggreen, Christian; Carlsson, Leif A.

    2010-01-01

    A face/core debond in a sandwich structure may propagate in the interface or kink into either the face or core. It is found that certain modifications of the face/core interface region influence the kinking behavior, which is studied experimentally in the present paper. A sandwich double cantilever...

  18. Fracture Analysis of Debonded Sandwich Columns Under Axial Compression

    DEFF Research Database (Denmark)

    May, A.; Avilés, F.; Berggreen, Christian

    A sandwich structure consists of two strong and stiff face sheets bonded to a weak low density core. The large separation between the face sheets provides increased bending rigidity and strength at low weight cost. Thus, sandwich structures frequently present better mechanical properties than mon...

  19. Thick Plate Homogenization of Sandwich Panels Including Folded Cellular Cores

    OpenAIRE

    LEBEE, Arthur; Sab, Karam

    2011-01-01

    In the present work, we provide the Bending-Gradient homogenization scheme and apply it to a sandwich panel including the chevron pattern. It turns out that the shear forces stiffness of the sandwich panel is strongly influenced by a skin distortion phenomenon which cannot be neglected in conventional design.

  20. Finite Element Modeling of the Buckling Response of Sandwich Panels

    Science.gov (United States)

    Rose, Cheryl A.; Moore, David F.; Knight, Norman F., Jr.; Rankin, Charles C.

    2002-01-01

    A comparative study of different modeling approaches for predicting sandwich panel buckling response is described. The study considers sandwich panels with anisotropic face sheets and a very thick core. Results from conventional analytical solutions for sandwich panel overall buckling and face-sheet-wrinkling type modes are compared with solutions obtained using different finite element modeling approaches. Finite element solutions are obtained using layered shell element models, with and without transverse shear flexibility, layered shell/solid element models, with shell elements for the face sheets and solid elements for the core, and sandwich models using a recently developed specialty sandwich element. Convergence characteristics of the shell/solid and sandwich element modeling approaches with respect to in-plane and through-the-thickness discretization, are demonstrated. Results of the study indicate that the specialty sandwich element provides an accurate and effective modeling approach for predicting both overall and localized sandwich panel buckling response. Furthermore, results indicate that anisotropy of the face sheets, along with the ratio of principle elastic moduli, affect the buckling response and these effects may not be represented accurately by analytical solutions. Modeling recommendations are also provided.

  1. Optimization of sandwich composites fuselages under flight loads

    NARCIS (Netherlands)

    Yan, C.; Bergsma, O.; Koussios, S.; Zu, L.; Beukers, A.

    2010-01-01

    The sandwich composites fuselages appear to be a promising choice for the future aircrafts because of their structural efficiency and functional integration advantages. However, the design of sandwich composites is more complex than other structures because of many involved variables. In this paper,

  2. Design and manufacturing of bio-based sandwich structures

    CSIR Research Space (South Africa)

    John, Maya J

    2017-03-01

    Full Text Available The aim of this chapter is to discuss the design and manufacturing of bio-based sandwich structures. As the economic advantages of weight reduction have become mandatory for many advanced industries, bio-based sandwich panels have emerged...

  3. Development, testing, and numerical modeling of a foam sandwich biocomposite

    Science.gov (United States)

    Chachra, Ricky

    This study develops a novel sandwich composite material using plant based materials for potential use in nonstructural building applications. The face sheets comprise woven hemp fabric and a sap based epoxy, while the core comprises castor oil based foam with waste rice hulls as reinforcement. Mechanical properties of the individual materials are tested in uniaxial compression and tension for the foam and hemp, respectively. The sandwich composite is tested in 3 point bending. Flexural results are compared to a finite element model developed in the commercial software Abaqus, and the validated model is then used to investigate alternate sandwich geometries. Sandwich model responses are compared to existing standards for nonstructural building panels, showing that the novel material is roughly half the strength of equally thick drywall. When space limitations are not an issue, a double thickness sandwich biocomposite is found to be a structurally acceptable replacement for standard gypsum drywall.

  4. Multilayered sandwich-like architecture containing large-scale faceted Al–Cu–Fe quasicrystal grains

    Energy Technology Data Exchange (ETDEWEB)

    Wei, Dongxia; He, Zhanbing, E-mail: hezhanbing@ustb.edu.cn

    2016-01-15

    Faceted quasicrystals are structurally special compared with traditional crystals. Although the application of faceted quasicrystals has been expected, wide-scale application has not occurred owing to the limited exposure of the facets. Using a facile method of heat treatment, we synthesize a multilayered sandwich-like structure with each layer composed of large-scale pentagonal-dodecahedra of Al–Cu–Fe quasicrystals. Moreover, there are channels between the adjacent Al–Cu–Fe layers that serve to increase the exposure of the facets of quasicrystals. Scanning electron microscopy, transmission electron microscopy, and X-ray diffraction are used to characterize the multilayered architecture, and the generation mechanisms of this special structure are also discussed. - Highlights: • A multilayered sandwich-like structure is produced by a facile method. • Each layer is covered by large-scale faceted Al–Cu–Fe quasicrystals. • There are channels between the adjacent Al–Cu–Fe layers.

  5. Nanoparticle organization in sandwiched polymer brushes.

    Science.gov (United States)

    Curk, Tine; Martinez-Veracoechea, Francisco J; Frenkel, Daan; Dobnikar, Jure

    2014-05-14

    The organization of nanoparticles inside grafted polymer layers is governed by the interplay of polymer-induced entropic interactions and the action of externally applied fields. Earlier work had shown that strong external forces can drive the formation of colloidal structures in polymer brushes. Here we show that external fields are not essential to obtain such colloidal patterns: we report Monte Carlo and molecular dynamics simulations that demonstrate that ordered structures can be achieved by compressing a "sandwich" of two grafted polymer layers, or by squeezing a coated nanotube, with nanoparticles in between. We show that the pattern formation can be efficiently controlled by the applied pressure, while the characteristic length-scale, that is, the typical width of the patterns, is sensitive to the length of the polymers. Based on the results of the simulations, we derive an approximate equation of state for nanosandwiches.

  6. Development and Mechanical Behavior of FML/Aluminium Foam Sandwiches

    Science.gov (United States)

    Baştürk, S. B.; Tanoğlu, M.

    2013-10-01

    In this study, the Fiber-Metal Laminates (FMLs) containing glass fiber reinforced polypropylene (GFPP) and aluminum (Al) sheet were consolidated with Al foam cores for preparing the sandwich panels. The aim of this article is the comparison of the flexural properties of FML/Al foam sandwich panels bonded with various surface modification approaches (silane treatment and combination of silane treatment with polypropylene (PP) based film addition). The FML/foam sandwich systems were fabricated by laminating the components in a mould at 200 °C under 1.5 MPa pressure. The energy absorbtion capacities and flexural mechanical properties of the prepared sandwich systems were evaluated by mechanical tests. Experiments were performed on samples of varying foam thicknesses (8, 20 and 30 mm). The bonding among the sandwich components were achieved by various surface modification techniques. The Al sheet/Al foam sandwiches were also consolidated by bonding the components with an epoxy adhesive to reveal the effect of GFPP on the flexural performance of the sandwich structures.

  7. GAMBE: multipurpose sandwich detector for neutrons and photons

    Science.gov (United States)

    Ahmed, A.; Burdin, S.; Casse, G.; van Zalinge, H.; Powel, S.; Rees, J.; Smith, A.; Tsurin, I.

    2016-10-01

    Detectors made with semiconductors such as silicon can be efficiently used for detecting and imaging neutrons when coated with suitable materials. They detect the charged reaction products resulting from the interaction of thermal neutrons with materials with high capture cross section like 10B, 6Li, and 6LiF. This work describes the performance of a thermal neutron detector system, GAMBE, which is based on silicon sensors and a layer of neutron-sensitive material, such as a lithium fluoride film or a lithium-6 foil, in a sandwich configuration. This arrangement has a total detection efficiency of 4 +/- 2 %, 7 +/- 1 %, and12 +/- 1 % for 7 μm 6LiF film, 40 μm and 70 μm 6Li foil respectively. Also, it enhances the rejection of fake hits using a simple coincidence method. The coincidence that defines a true neutron hit is the simultaneous signal recorded by the two sensors facing the conversion layer (or foil). These coincidences provide a very good method for rejecting the spurious hits coming from gamma-rays, which are usually present in the neutron field under measurement. The GAMBE system yields a rejection factor at the level of 108 allowing very pure neutron detection in high gamma background conditions. However, the price to pay is a reduction of the detection efficiency of 1 +/- 1 % or 0:9 +/- 0:3 % for 7 μm 6LiF film and 40 μm 6Li foil respectively.

  8. Sandwich module prototype progress for space solar power

    Science.gov (United States)

    Jaffe, Paul; Hodkin, Jason; Harrington, Forest; Person, Clark; Nurnberger, Michael; Nguyen, Bang; LaCava, Susie; Scheiman, Dave; Stewart, Grant; Han, Andrew; Hettwer, Ethan; Rhoades, Daniel

    2014-02-01

    Space solar power (SSP) has been broadly defined as the collection of solar energy in space and its wireless transmission for use on earth. This approach potentially gives the benefit of provision of baseload power while avoiding the losses due to the day/night cycle and tropospheric effects that are associated with terrestrial solar power. Proponents have contended that the implementation of such systems could offer energy security, environmental, and technological advantages to those who would undertake their development. Among recent implementations commonly proposed for SSP, the modular symmetrical concentrator (MSC) and other modular concepts have received considerable attention. Each employs an array of modules for performing conversion of concentrated sunlight into microwaves or laser beams for transmission to earth. While prototypes of such modules have been designed and developed previously by several groups, none have been subjected to the challenging conditions inherent to the space environment and the possible solar concentration levels in which an array of modules might be required to operate. The research described herein details our team's efforts in the development of photovoltaic arrays, power electronics, microwave conversion electronics, and antennas for microwave-based "sandwich" module prototypes. The implementation status and testing results of the prototypes are reviewed.

  9. Wave propagation in sandwich panels with a poroelastic core.

    Science.gov (United States)

    Liu, Hao; Finnveden, Svante; Barbagallo, Mathias; Arteaga, Ines Lopez

    2014-05-01

    Wave propagation in sandwich panels with a poroelastic core, which is modeled by Biot's theory, is investigated using the waveguide finite element method. A waveguide poroelastic element is developed based on a displacement-pressure weak form. The dispersion curves of the sandwich panel are first identified as propagating or evanescent waves by varying the damping in the panel, and wave characteristics are analyzed by examining their motions. The energy distributions are calculated to identify the dominant motions. Simplified analytical models are also devised to show the main physics of the corresponding waves. This wave propagation analysis provides insight into the vibro-acoustic behavior of sandwich panels lined with elastic porous materials.

  10. A Debonded Sandwich Specimen Under Mixed Mode Bending (MMB)

    DEFF Research Database (Denmark)

    Quispitupa, Amilcar; Berggreen, Christian; Carlsson, Leif A.

    2008-01-01

    Face/core interface crack propagation in sandwich specimens is analyzed. A thorough analysis of the typical failure modes in sandwich composites was performed in order to design the MMB specimen to promote face/core debond fracture. Displacement, compliance and energy release rate expressions...... for the MMB specimen were derived from a superposition analysis. An experimental verification of the methodology proposed was performed using MMB sandwich specimens with H100 PVC foam core and E-glass/polyester non-crimp quadro-axial [0/45/90/-45]s DBLT-850 faces. Different mixed mode loadings were applied...

  11. Measuring Cohesive Laws for Interfaces in Sandwich Structures

    DEFF Research Database (Denmark)

    Lundsgaard-Larsen, Christian; Sørensen, Bent F.; Berggreen, Carl Christian

    2006-01-01

    Extraction of cohesive laws are conducted for interfaces in sandwich structures. Separation between face and core are driven by pure bending moments applied to double cantilever beam (DCB) specimens. By varying the ratio between moments applied to the beams the test is conducted for different mode...... mixities. The sandwich specimens consists of glass fiber faces and Divinycell H200 foam core with a pre-crack between face and core made with teflon film. Arbitrary stiffening of the sandwich faces with steel bars adhered to the faces reduces rotations and ensures that the method is useable for a wide...

  12. A Debonded Sandwich Specimen Under Mixed Mode Bending (MMB)

    DEFF Research Database (Denmark)

    Quispitupa, Amilcar; Berggreen, Christian; Carlsson, Leif A.

    2008-01-01

    Face/core interface crack propagation in sandwich specimens is analyzed. A thorough analysis of the typical failure modes in sandwich composites was performed in order to design the MMB specimen to promote face/core debond fracture. Displacement, compliance and energy release rate expressions...... for the MMB specimen were derived from a superposition analysis. An experimental verification of the methodology proposed was performed using MMB sandwich specimens with H100 PVC foam core and E-glass/polyester non-crimp quadro-axial [0/45/90/-45]s DBLT-850 faces. Different mixed mode loadings were applied...

  13. Measuring Cohesive Laws for Interfaces in Sandwich Structures

    DEFF Research Database (Denmark)

    Lundsgaard-Larsen, Christian; Sørensen, Bent F.; Berggreen, Carl Christian

    2006-01-01

    Extraction of cohesive laws are conducted for interfaces in sandwich structures. Separation between face and core are driven by pure bending moments applied to double cantilever beam (DCB) specimens. By varying the ratio between moments applied to the beams the test is conducted for different mode...... mixities. The sandwich specimens consists of glass fiber faces and Divinycell H200 foam core with a pre-crack between face and core made with teflon film. Arbitrary stiffening of the sandwich faces with steel bars adhered to the faces reduces rotations and ensures that the method is useable for a wide...

  14. Thermal behavior of a titanium honeycomb-core sandwich panel

    Science.gov (United States)

    Ko, William L.; Jackson, Raymond H.

    1991-01-01

    Finite element thermal stress analysis was performed on a rectangular titanium honecomb-core sandwich panel which is subjected to thermal load with a temperature gradient across its depth. The distributions of normal stresses in the face sheets and the face-sheet/sandwich-core interfacial shear stresses are presented. The thermal buckling of the heated face sheet was analyzed by assuming the face sheet to be resting on an elastic foundation representing the sandwich core. Thermal buckling curves and thermal buckling load surface are presented for setting the limit for temperature gradient across the panel depth.

  15. Sandwich Panel as a Structural Element of Overlap

    Directory of Open Access Journals (Sweden)

    Novikov Maxim

    2016-01-01

    Full Text Available This paper considers the issue of sandwich panels using as load-bearing structural elements. The comparison of deflections and critical failure loads were obtained by the results of the full-scale roof sandwich panels tests conducted by the company “Joris Ide” and the theoretical design, according to the calculation method described in Euronorms. Based on these results it was concluded that sandwich panels can be treated as a load-bearing structure only with more taught manufacturing requirements. Thus, the reduced spread of critical loads can be achieved.

  16. Development of monoclonal antibody-based sandwich ELISA for detection of dextran.

    Science.gov (United States)

    Wang, Sheng-Yu; Li, Zhe; Wang, Xian-Jiang; Lv, Sha; Yang, Yun; Zeng, Lian-Qiang; Luo, Fang-Hong; Yan, Jiang-Hua; Liang, Da-Feng

    2014-10-01

    Dextran as anti-nutritional factor is usually a result of bacteria activity and has associated serial problems during the process stream in the sugar industry and in medical therapy. A sensitive method is expected to detect dextran quantitatively. Here we generated four monoclonal antibodies (MAbs) against dextran using dextran T40 conjugated with bovine serum albumin (BSA) as immunogen in our lab following hybridoma protocol. Through pairwise, an MAb named D24 was determined to be conjugated with horseradish peroxidase (HRP) and was used in the establishment of a sensitive sandwich enzyme-linked immunosorbent assay (ELISA) method for determination of dextran, in which MAb D9 was chosen as a capture antibody. The detection limit and working scope of the developed sandwich ELISA method were 3.9 ng/mL and 7.8-500 ng/mL with a correlation coefficient of 0.9909. In addition, the cross-reaction assay demonstrated that the method possessed high specificity with no significant cross-reaction with dextran-related substances, and the recovery rate ranged from 96.35 to 102.00%, with coefficient of variation ranging from 1.58 to 6.94%. These results indicated that we developed a detection system of MAb-based sandwich ELISA to measure dextran and this system should be a potential tool to determine dextran levels.

  17. Numerical comparison of patch and sandwich piezoelectric transducers for transmitting ultrasonic waves

    Science.gov (United States)

    Loveday, Philip W.

    2006-03-01

    Guided wave ultrasonic inspection is becoming an important method of non-destructive testing for long, slender structures such as pipes and rails. Often it is desirable to use transducers that can strongly excite a specific mode of wave propagation in the waveguide. Piezoelectric patch transducers are frequently employed, by researchers, for exciting waves in beam like structures. Sonar systems frequently make use of resonant transducers, such as sandwich transducers, for acoustic wave generation and this principle has been used to excite waves in a rail. This paper compares the two transduction approaches, for launching bending waves in rectangular waveguides, with numerical modeling. The numerical modeling combined a waveguide finite element model, of the waveguide, with conventional three-dimensional piezoelectric finite element models of the transducers. The waveguide finite elements were formulated using a complex exponential to describe the wave propagation along the structure and conventional finite element interpolation over the area of the element. Consequently, only a two-dimensional finite element mesh covering the cross-section of the waveguide is required. The harmonic forced response of the waveguide was used to compute a complex dynamic stiffness matrix which represented the waveguide in the transducer model. The effects of geometrical parameters of patch and sandwich transducers were considered before the comparison was made. It appears that piezoelectric patch transducers offer advantages at low frequencies while sandwich transducers are superior at high frequencies, where resonance can be exploited, at the cost of more complex design.

  18. Evaluation of a Composite Sandwich Fuselage Side Panel with Damage and Subjected to Internal Pressure

    Science.gov (United States)

    Rouse, Marshall; Ambur, Damodar R.; Bodine, Jerry; Dopker, Bernhard

    1997-01-01

    The results from an experimental and analytical study of a composite sandwich fuselage side panel for a transport aircraft are presented. The panel has two window cutouts and three frames, and has been evaluated with internal pressure loads that generate biaxial tension loading conditions. Design limit load and design ultimate load tests have been performed on the graphite-epoxy sandwich panel with the middle frame removed to demonstrate the suitability of this two-frame design for supporting the prescribed biaxial loading conditions with twice the initial frame spacing of 20 inches. The two-frame panel was damaged by cutting a notch that originates at the edge of a cutout and extends in the panel hoop direction through the window-belt area. This panel with a notch was tested in a combined-load condition to demonstrate the structural damage tolerance at the design limit load condition. The two panel configurations successfully satisfied all design load requirements in the experimental part of the study, and the three-frame and two-frame panel responses are fully explained by the analysis results. The results of this study suggest that there is potential for using sandwich structural concepts with greater than the usual 20-in.-wide frame spacing to further reduce aircraft fuselage structural weight.

  19. Fatigue Failure of Sandwich Beams with Wrinkle Defects Used for Wind Turbine Blades

    DEFF Research Database (Denmark)

    Leong, Martin Klitgaard; Hvejsel, C.F.; Lund, Erik

    2012-01-01

    Glass fiber face sheet/balsa wood core sandwich beams with out-of-plane fiber misalignments/wrinkle defects were subjected to in-plane fully reversed fatigue loading and the failure modes were documented. A fatigue life design limit was estimated using finite element analyses and the Northwestern...... University failure theory. The presence of the wrinkle defect significantly lowered the fatigue strength, but it was found that the test specimens could reach a pre-defined fatigue life with no signs of damage, by applying a fatigue load below 80% of the estimated design limit....

  20. Successful mouse hepatocyte culture with sandwich collagen gel formation

    National Research Council Canada - National Science Library

    Choi, Hyun Jung; Choi, Dongho

    2013-01-01

    .... However, long-term cultures of functional hepatocytes are difficult to establish. To increase the longevity and maintain the differentiated functions of hepatocytes in primary culture, cells can be cultured in a sandwich configuration of collagen...

  1. Outcome of the TURP-TUVP sandwich procedure for minimally ...

    African Journals Online (AJOL)

    shanker

    TURP–TUVP sandwich procedure for the surgical treatment of BPH larger than 40cc in ... volume larger than 40cc had satisfactory patient safety profile and resulted in .... ment, nursing contact time, and duration of catheterization, besides.

  2. Sandwich-like reconstruction of anterior skull base defects

    Institute of Scientific and Technical Information of China (English)

    WANG Zhengmin; WANG Dehui

    2002-01-01

    @@ RESULTS From October, 1984 to October, 1998, 116 patients underwent transcranial or transcranial-facial approach for the resection of malignant or benign aggressive tumor, and sandwich-like repairs were performed for the anterior skull base defect.

  3. Mechanical and vibro-acoustic aspects of composite sandwich cylinders

    NARCIS (Netherlands)

    Yuan, C.

    2013-01-01

    Designing a fuselage involves many considerations such as strength and stability, fatigue, damage tolerance, fire and lightning resistance, thermal and acoustic insulation, production, inspection, maintenance and repair. In the background of the application of composite sandwich structures on the ai

  4. Mechanical and vibro-acoustic aspects of composite sandwich cylinders

    NARCIS (Netherlands)

    Yuan, C.

    2013-01-01

    Designing a fuselage involves many considerations such as strength and stability, fatigue, damage tolerance, fire and lightning resistance, thermal and acoustic insulation, production, inspection, maintenance and repair. In the background of the application of composite sandwich structures on the ai

  5. Observability and Controllability Analysis for Sandwich Systems with Backlash

    Directory of Open Access Journals (Sweden)

    Luo Na

    2015-12-01

    Full Text Available In this paper, an approach to analyze the observability and controllability of sandwich systems with backlash is proposed. In this method, a non-smooth state-space function is used to describe the sandwich systems with backlash which are also non-smooth non-linear systems. Then, a linearization method based on non-smooth optimization is proposed to derive a linearized state-space function to approximate the non-smooth sandwich systems within a bounded region around the equilibrium point that we are interested in. Afterwards, both observability and controllability matrices are constructed and the methods to analyze the observability as well as controllability of sandwich system with backlash are derived. Finally, numerical examples are presented to validate the proposed method.

  6. Mechanical and vibro-acoustic aspects of composite sandwich cylinders

    NARCIS (Netherlands)

    Yuan, C.

    2013-01-01

    Designing a fuselage involves many considerations such as strength and stability, fatigue, damage tolerance, fire and lightning resistance, thermal and acoustic insulation, production, inspection, maintenance and repair. In the background of the application of composite sandwich structures on the

  7. Residual Strength Prediction of Debond Damaged Sandwich Panels

    DEFF Research Database (Denmark)

    Berggreen, Carl Christian

    This presentation concerns theoretical and experimental prediction of crack propagation and residual strength of debond damaged sandwich panels. It is evident that in order to achieve highly optimised structures which are able to operate in a stochastic loading environment, damage tolerance...... propagation and initiation, as these mechanisms are governing for the overall failure load of the structure. Thus, this presentation will describe the development, validation and application of a FEM based numerical model for prediction of residual strength of damaged sandwich panels. The core......, but they are especially relevant for sandwich structures which by nature are highly optimised structures with a high number of possible damage scenarios and consequent failure mechanisms. A major challenge in estimation of structural integrity of damaged sandwich structures is modelling and prediction of crack...

  8. Fracture Characterization of Sandwich Face/Core Interfaces

    DEFF Research Database (Denmark)

    Manca, Marcello

    such result it is important to devise new experimental and analytical techniques to establish the multi-mode fracture characteristics of sandwich plate structures and accordingly develop methods to inhibit defect propagation. This thesis deals with characterization of fracture between face and core...... samples. A number of sandwich materials were tested (GFRP/foam cores and CFRP/Nomex) bothin static and fatigue. A linear elastic fracture mechanics model was used to determine the analyticalexpression of compliance which allowed to calculate automatically the crack length. In combination, a finite element...... types of sandwich samples atdifferent mode mixities and ΔG levels, and results in agreement with previous studies were obtained suggesting that the developed testing method is a reliable tool for the study of face/core interface debonded sandwich structures....

  9. Forced vibration of a shear thickening fluid sandwich beam

    Science.gov (United States)

    Wei, Minghai; Hu, Gang; Jin, Lu; Lin, Kun; Zou, Dujian

    2016-05-01

    The forced vibration of a sandwich beam integrating a shear thickening fluid (STF) core and with conductive skins subjected to a periodic excitation was investigated theoretically in this study. The rheological properties of the STF material including viscosity, plasticity, and elasticity may be changed under the periodic vibration, and hence they were considered. The governing equation of motion was derived based on the complex stiffness method and some key parameters were derived based on the Timoshenko beam theory. Effects of the excitation frequency, the excitation amplitude, the excitation location, and the skin/core thickness ratio on the nature frequency of the sandwich beam were investigated. It was found that the STF core has a significant effect on the dynamic property of the sandwich beam. Based on the findings, integrating the STF core in a sandwich beam can reduce the vibration of the beam.

  10. Dispersion of Lamb waves in a honeycomb composite sandwich panel.

    Science.gov (United States)

    Baid, Harsh; Schaal, Christoph; Samajder, Himadri; Mal, Ajit

    2015-02-01

    Composite materials are increasingly being used in advanced aircraft and aerospace structures. Despite their many advantages, composites are often susceptible to hidden damages that may occur during manufacturing and/or service of the structure. Therefore, safe operation of composite structures requires careful monitoring of the initiation and growth of such defects. Ultrasonic methods using guided waves offer a reliable and cost effective method for defects monitoring in advanced structures due to their long propagation range and their sensitivity to defects in their propagation path. In this paper, some of the useful properties of guided Lamb type waves are investigated, using analytical, numerical and experimental methods, in an effort to provide the knowledge base required for the development of viable structural health monitoring systems for composite structures. The laboratory experiments involve a pitch-catch method in which a pair of movable transducers is placed on the outside surface of the structure for generating and recording the wave signals. The specific cases considered include an aluminum plate, a woven composite laminate and an aluminum honeycomb sandwich panel. The agreement between experimental, numerical and theoretical results are shown to be excellent in certain frequency ranges, providing a guidance for the design of effective inspection systems.

  11. Lightweight Sandwich Panel in Cold Stores and Refrigerated Warehouses

    OpenAIRE

    Chidom, Charles

    2013-01-01

    The use of sandwich panels has gained considerable recognition in the construction industry and more use of this composite structure is ever increasing. This study highlights and familiarizes the use of lightweight sandwich panel in refrigerated warehouses and cold storage facility and construction and the challenges such construction faces in warm climates considering the effects of thermal load. The study was commissioned by HAMK Sheet Metal Center, the steel research and development ce...

  12. Optimization of composite sandwich cover panels subjected to compressive loadings

    Science.gov (United States)

    Cruz, Juan R.

    1991-01-01

    An analysis and design method is presented for the design of composite sandwich cover panels that include the transverse shear effects and damage tolerance considerations. This method is incorporated into a sandwich optimization computer program entitled SANDOP. As a demonstration of its capabilities, SANDOP is used in the present study to design optimized composite sandwich cover panels for for transport aircraft wing applications. The results of this design study indicate that optimized composite sandwich cover panels have approximately the same structural efficiency as stiffened composite cover panels designed to satisfy individual constraints. The results also indicate that inplane stiffness requirements have a large effect on the weight of these composite sandwich cover panels at higher load levels. Increasing the maximum allowable strain and the upper percentage limit of the 0 degree and +/- 45 degree plies can yield significant weight savings. The results show that the structural efficiency of these optimized composite sandwich cover panels is relatively insensitive to changes in core density. Thus, core density should be chosen by criteria other than minimum weight (e.g., damage tolerance, ease of manufacture, etc.).

  13. A study of structurally efficient graphite-thermoplastic trapezoidal-corrugation sandwich and semi-sandwich panels

    Science.gov (United States)

    Jegley, Dawn C.

    1993-01-01

    The structural efficiency of compression-loaded trapezoidal-corrugation sandwich and semi-sandwich composite panels is studied to determine their weight savings potential. Sandwich panels with two identical face sheets and a trapezoidal corrugated core between them, and semi-sandwich panels with a corrugation attached to a single skin are considered. An optimization code is used to find the minimum weight designs for critical compressive load levels ranging from 3,000 to 24,000 lb/in. Graphite-thermoplastic panels based on the optimal minimum weight designs were fabricated and tested. A finite-element analysis of several test specimens was also conducted. The results of the optimization study, the finite-element analysis, and the experiments are presented.

  14. Evaluation of barely visible indentation damage (BVID) in CF/EP sandwich composites using guided wave signals

    Science.gov (United States)

    Mustapha, Samir; Ye, Lin; Dong, Xingjian; Alamdari, Mehrisadat Makki

    2016-08-01

    Barely visible indentation damage after quasi-static indentation in sandwich CF/EP composites was assessed using ultrasonic guided wave signals. Finite element analyses were conducted to investigate the interaction between guided waves and damage, further to assist in the selection process of the Lamb wave sensitive modes for debonding identification. Composite sandwich beams and panels structures were investigated. Using the beam structure, a damage index was defined based on the change in the peak magnitude of the captured wave signals before and after the indentation, and the damage index was correlated with the residual deformation (defined as the depth of the dent), that was further correlated with the amount of crushing within the core. Both A0 and S0 Lamb wave modes showed high sensitivity to the presence of barely visible indentation damage with residual deformation of 0.2 mm. Furthermore, barely visible indentation damage was assessed in composite sandwich panels after indenting to 3 and 5 mm, and the damage index was defined, based on (a) the peak magnitude of the wave signals before and after indentation or (b) the mismatch between the original and reconstructed wave signals based on a time-reversal algorithm, and was subsequently applied to locate the position of indentation.

  15. Electronically asymmetric bis(porphyrin) sandwich complexes

    Energy Technology Data Exchange (ETDEWEB)

    Girolami, G.S.; Gorlin, P.A.; Suslick, K.S. [Univ. of Illinois, Urbana, IL (United States)

    1994-02-16

    Bis(porphyrin)metal(IV) complexes (M(porph){sub 2}) have been extensively studies in recent years due to their structural, chemical, and spectroscopic similarity to the {open_quotes}special pair{close_quotes} found in the reaction center of photosynthetic bacteria. Strong interactions arise in the bis(porphyrin) complexes due to the short inter-porphyrin separation (< 3 {angstrom}), which results in properties not seen in mono(porphyrin) analogs. For example, the bis(porphyrin) complexes are considerably easier to oxidize than analogous mono(porphyrin) species, and the M(porph){sub 2{sup n+}} cations (n = 1,2) exhibit near-IR absorptions not found in simple mono(porphyrin)cations. As part of the authors continuing effort to understand the factors that govern the electronic structures of bis(porphyrin) supermolecules, the authors now describe the synthesis of a series of zirconium sandwich complexes. Introduction of electron-withdrawing or -donating groups on the {beta}-pyrrole position considerably affects the electronic properties of these molecules without altering their steric parameters. Thus, peripheral substitution allows modification of the inter-porphyrin {pi} interactions while keeping the inter-porphyrin separation constant. Previous studies have changed the identity of the central metal, but the electronic structure and the interplanar distance could not be varied independently.

  16. A general strategy towards encapsulation of nanoparticles in sandwiched graphene sheets and the synergic effect on energy storage.

    Science.gov (United States)

    Wang, Yu; Bai, Yuanjuan; Li, Xiao; Feng, Yangyang; Zhang, Huijuan

    2013-03-04

    A novel and universal approach towards the unique encapsulation of nanoparticles in the sandwiched graphene sheets is presented here. In the method, a low-cost, sustainable and environmentally friendly carbon source, glucose, is firstly applied to yield the high-quality, uniform and coupled graphene sheets in a large scale, and the pre-fabricated hydrated nanosheets act as the sacrificial templates to generate the enveloped metallic nanoparticles. After controllable oxidation or removal of the encapsulated nanoparticles, sandwiched nanocomposite with oxidizes nanoparticles encapsulated in graphene sheets or pure phase of sandwich-like and coupled graphene sheets would be achieved. Moreover, the synergic effect on energy storage via Li-ion batteries is solidly verified in the Co(3)O(4)@graphene nanocomposite. More importantly, the unique structure of the nanoparticles-encapsulated sandwiched graphene sheets will definitely result in additional applications, such as biosensors, supercapacitors and specific catalyses. These results have enriched the family of graphene-based materials and recognized some new graphene derivatives, which will be considerably meaningful in chemistry and materials sciences.

  17. Analysis of Mixed Mode I/II/III Fracture in Foam Core Sandwich Structures Using Imposed Displacement Split Cantilever Beams

    Directory of Open Access Journals (Sweden)

    Rizov V.

    2015-09-01

    Full Text Available Static fracture in foam core sandwich structures under mixed mode I/II/III loading conditions was studied theoretically. In order to generate such loading conditions, a thread guide was used to impose in- plane displacements of the lower crack arm of a sandwich Split Cantilever Beam (SCB. The upper crack arm was loaded by a transverse force. A three-dimensional finite element model of the imposed displacement sandwich SCB configuration was developed. The fracture was studied applying the concepts of linear-elastic fracture mechanics. The strain energy release rate mode components distribution along the crack front was analyzed using the virtual crack closure technique. The influence of the imposed displacement magnitude and the crack length on the fracture was evaluated. The effect of the sandwich core material on the mixed-mode I/II/III fracture was studied. For this purpose, finite element simulations were carried-out assuming that the core is made by different rigid cellular foams. It was found that the strain energy release rate decreases when the foam density increases.

  18. Feasibility study of a SiC sandwich neutron spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Jian, E-mail: caepwujian@163.com [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900, Sichuan Province (China); Lei, Jiarong, E-mail: jiarong_lei@163.com [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900, Sichuan Province (China); Jiang, Yong; Chen, Yu; Rong, Ru; Zou, Dehui; Fan, Xiaoqiang [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900, Sichuan Province (China); Chen, Gang; Li, Li; Bai, Song [Nanjing Electronic Devices Institute, Nanjing 210016 (China)

    2013-04-21

    Semiconductor sandwich neutron spectrometers are suitable for in-pile measurements of fast reactor spectra thanks to their compact and relatively simple design. We have assembled and tested a sandwich neutron spectrometer based on 4H-silicon carbide (4H-SiC) Schottky diodes. The SiC diodes detect neutrons via neutron-induced charged particles (tritons and alpha particles) produced by {sup 6}Li(n,α){sup 3}H reaction. {sup 6}LiF neutron converter layers are deposited on the front surface of Schottky diodes by magnetron sputtering. The responses of SiC diodes to charged particles were investigated with an {sup 241}Am alpha source. A sandwich neutron spectrometer was assembled with two SiC Schottky diodes selected based on the charged-particle-response experimental results. The low-energy neutron response of the sandwich spectrometer was measured in the neutron field of the Chinese Fast Burst Reactor-II (CFBR-II). Spectra of alpha particles and tritons from {sup 6}Li(n,α){sup 3}H reaction were obtained with two well-resolved peaks. The energy resolution of the sum spectrum was 8.8%. The primary experimental results confirmed the 4H-SiC sandwich neutron spectrometer's feasibility. -- Highlights: ► Sandwich neutron spectrometer employing 4H-SiC as a detecting material has been developed for the first time. ► {sup 6}LiF neutron converter has been deposited on the surface of 4H-SiC Schottky diode. ► Preliminary testing results obtained with the 4H-SiC sandwich neutron spectrometer are presented.

  19. Monolayer graphene saturable absorber with sandwich structure for ultrafast solid-state laser

    Science.gov (United States)

    Zhu, Hongtong; Zhao, Lina; Liu, Jie; Xu, Shicai; Cai, Wei; Jiang, Shouzhen; Zheng, Lihe; Su, Liangbi; Xu, Jun

    2016-08-01

    The uniform-quality, large-area, monolayer graphene saturable absorber (SA) with sandwich structure was fabricated, tested, and successfully applied for the generation of diode-pumped Yb:Y2SiO5 mode-locked laser. Without extra negative dispersion elements, the shortest pulse with duration of ˜883 fs was obtained at 1042.6 nm with an output power of ˜1 W. These promising experimental results suggested that the low-cost, high-quality graphene SA could potentially be employed in practical, high-power, ultrafast mode-locking laser systems.

  20. Employment of a metal microgrid as a front electrode in a sandwich-structured photodetector.

    Science.gov (United States)

    Zhang, Junying; Cai, Chao; Pan, Feng; Hao, Weichang; Zhang, Weiwei; Wang, Tianmin

    2009-07-01

    A highly UV-transparent metal microgrid was prepared and employed as the front electrode in a sandwich-structured ultraviolet (UV) photodetector using TiO(2) thin film as the semiconductor layer. The photo-generated charger carriers travel a shorter distance before reaching the electrodes in comparison with a photodetector using large-spaced interdigitated metal electrodes (where distance between fingers is several to tens of micrometers) on the surface of the semiconductor film. This photodetector responds to UV light irradiation, and the photocurrent intensity increases linearly with the irradiation intensity below 0.2 mW/cm(2).

  1. Tunneling magnetoresistance of C{sub 2}H{sub 2} molecules sandwiched between Co clusters

    Energy Technology Data Exchange (ETDEWEB)

    Zare-Kolsaraki, H. E-mail: kolsarak@ph2.uni-koeln.de; Micklitz, H

    2004-09-01

    The tunneling magnetoresistance (TMR) of samples containing well-defined Co clusters ({approx}4.5 nm mean diameter) embedded in C{sub 2}H{sub 2} matrices essentially is independent of Co-cluster volume fraction v{sub Co} and reveals a value of about 26% at T=2 K. This result is in contrast to that obtained for Co clusters embedded in C{sub 2}H{sub 4} matrices (Phys. Rev. B 67 (2003) 094433). In the latter system the TMR strongly decreased with increasing v{sub Co} indicating different possible orientation of the C{sub 2}H{sub 4} molecule sandwiched between the Co clusters. We, therefore, conclude that the C{sub 2}H{sub 2} molecules are sandwiched in a rather well-defined orientation between the Co clusters. They probably form double layers of C{sub 2}H{sub 2} molecules with the C-C bond axis parallel to the Co cluster surface.

  2. Development of an innovative sandwich common bulkhead for cryogenic upper stage propellant tank

    Science.gov (United States)

    Szelinski, B.; Lange, H.; Röttger, C.; Sacher, H.; Weiland, S.; Zell, D.

    2012-12-01

    In the frame of the Future Launcher Preparatory Program (FLPP) investigating advancing technologies for the Next Generation of Launchers (NGL) a number of novel key technologies are presently under development for significantly improving vehicle performance in terms of payload capacity and mission versatility. As a respective ESA guided technology development program, Cryogenic Upper Stage Technologies (CUST) has been launched within FLPP that hosts among others the development of a common bulkhead to separate liquid hydrogen from the liquid oxygen compartment. In this context, MT Aerospace proposed an advanced sandwich design concept which is currently in the development phase reaching for TRL4 under MT Aerospace responsibility. Key components of this sandwich common bulkhead are a specific core material, situated in-between two thin aluminum face sheets, and an innovative thermal decoupling element at the equatorial region. The combination of these elements provides excellent thermal insulation capabilities and mechanical performance at a minimum weight, since mechanical and thermal functions are merged in the same component. This improvement is expressed by substantial performance figures of the proposed concept that include high resistance against reverse pressure, an optimized heat leak and minimized mass, involving the sandwich dome structure and the adjacent interface rings. The development of single sub-technologies, all contributing to maturate the sandwich common bulkhead towards the desired technology readiness level (TRL), is described in the context of the given design constraints as well as technical, functional and programmatic requirements, issued from the stage level. This includes the thermal and mechanical characterization of core materials, manufacturing issues as well as non-destructive testing and the thermal and structural analyses and dimensioning of the complete common bulkhead system. Dedicated TRL assessments in the Ariane 5 Mid

  3. Critical velocity of sandwich cylindrical shell under moving internal pressure

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Critical velocity of an infinite long sandwich shell under moving internal pres-sure is studied using the sandwich shell theory and elastodynamics theory. Propagation of axisymmetric free harmonic waves in the sandwich shell is studied using the sandwich shell theory by considering compressibility and transverse shear deformation of the core, and transverse shear deformation of face sheets. Based on the elastodynamics theory, displacement components expanded by Legendre polynomials, and position-dependent elastic constants and densities are introduced into the equations of motion. Critical ve-locity is the minimum phase velocity on the desperation relation curve obtained by using the two methods. Numerical examples and the finite element (FE) simulations are pre-sented. The results show that the two critical velocities agree well with each other, and two desperation relation curves agree well with each other when the wave number κ is relatively small. However, two limit phase velocities approach to the shear wave velocities of the face sheet and the core respectively when k limits to infinite. The two methods are efficient in the investigation of wave propagation in a sandwich cylindrical shell when κ is relatively small. The critical velocity predicted in the FE simulations agrees with theoretical prediction.

  4. Experimental study on mechanical properties of aircraft honeycomb sandwich structures

    Directory of Open Access Journals (Sweden)

    Talebi Mazraehshahi H.

    2010-06-01

    Full Text Available Mechanical behaviour of sandwich panels under different conditions have been exprimentally studied in this research to increase the knowledge of aircraft sandwich panel structures and facilitate design criteria for aircraft structures. Tests were concentrated on the honeycomb sandwich structures under different loads including flexural, insert shear, flat wise tension and compression loads. Furthermore, effect of core density and face material on mechanical behavior of different samples were investigated and compared with analytical and FEM method. Effects of skin thickness on strength of honycomb sandwhich panels under shear pull out and moments have also been considerd in this study. According to this investigation, insert strength and flexural test under different load conditions is strongly affected by face thickness, but compression and tearoff (falt wise tensile properties of a sandwich panel depends on core material. The study concludes that the correlation between experimental results and the analytical predictions will enable the designer to predict the mechanical behaviour and strength of a sandwich beam; however, applied formula may lead engineers to unreliable results for shear modulus.

  5. Thermal buckling analysis of truss-core sandwich plates

    Institute of Scientific and Technical Information of China (English)

    陈继伟; 刘咏泉; 刘伟; 苏先樾

    2013-01-01

    Truss-core sandwich plates have received much attention in virtue of the high values of strength-to-weight and stiffness-to-weight as well as the great ability of impulse-resistance recently. It is necessary to study the stability of sandwich panels under the influence of the thermal load. However, the sandwich plates are such complex three-dimensional (3D) systems that direct analytical solutions do not exist, and the finite element method (FEM) cannot represent the relationship between structural parameters and mechanical properties well. In this paper, an equivalent homogeneous continuous plate is idealized by obtaining the effective bending and transverse shear stiffness based on the characteristics of periodically distributed unit cells. The first order shear deformation theory for plates is used to derive the stability equation. The buckling temperature of a simply supported sandwich plate is given and verified by the FEM. The effect of related parameters on mechanical properties is investigated. The geometric parameters of the unit cell are optimized to attain the maximum buckling temperature. It is shown that the optimized sandwich plate can improve the resistance to thermal buckling significantly.

  6. Design of sandwich acoustic window for sonar domes

    Institute of Scientific and Technical Information of China (English)

    YU Mengsa; LI Dongsheng; GONG Li; XU Jian

    2005-01-01

    Aimed at the low noise design of sonar dome in ships, a method has been presented for calculating the sonar self noise of a simplified sonar dome consisting of sandwich acoustic window and parallel acoustic cavity, which is excited by stationary random pressure fluctuation of turbulence boundary layer, using temporal and spatial double Fourier transform and wavenumber-frequency spectrum analysis. After numerically analyzing the influence of geometrical and physical parameters of acoustic window on the sonar self noise, the design method and reasonable parameters for sandwich acoustic window are proposed. The results show that the property of low noise induced by acoustic window of sandwich is dominated by the cut-off effect of longitudinal wave and transverse wave propagating in the visco-elastic layer of sandwich as well as the mismatch effect of impedance. If the thickness, density, Young's modulus and damping factor of plates and visco-elastic layer as well as the sound speed of longitudinal wave and transverse wave in the visco-elastic layer are selected reasonably, the maximum noise reduction of sandwich acoustic window is 6.5 dB greater than that of a single glass fiber reinforced plastic plate.

  7. A Newly Defined and Xeno-Free Culture Medium Supports Every-Other-Day Medium Replacement in the Generation and Long-Term Cultivation of Human Pluripotent Stem Cells.

    Science.gov (United States)

    Ahmadian Baghbaderani, Behnam; Tian, Xinghui; Scotty Cadet, Jean; Shah, Kevan; Walde, Amy; Tran, Huan; Kovarcik, Don Paul; Clarke, Diana; Fellner, Thomas

    2016-01-01

    Human pluripotent stem cells (hPSCs) present an unprecedented opportunity to advance human health by offering an alternative and renewable cell resource for cellular therapeutics and regenerative medicine. The present demand for high quality hPSCs for use in both research and clinical studies underscores the need to develop technologies that will simplify the cultivation process and control variability. Here we describe the development of a robust, defined and xeno-free hPSC medium that supports reliable propagation of hPSCs and generation of human induced pluripotent stem cells (hiPSCs) from multiple somatic cell types; long-term serial subculturing of hPSCs with every-other-day (EOD) medium replacement; and banking fully characterized hPSCs. The hPSCs cultured in this medium for over 40 passages are genetically stable, retain high expression levels of the pluripotency markers TRA-1-60, TRA-1-81, Oct-3/4 and SSEA-4, and readily differentiate into ectoderm, mesoderm and endoderm. Importantly, the medium plays an integral role in establishing a cGMP-compliant process for the manufacturing of hiPSCs that can be used for generation of clinically relevant cell types for cell replacement therapy applications.

  8. Ham Sandwich with Mayo: A Stronger Conclusion to the Classical Ham Sandwich Theorem

    CERN Document Server

    Elton, John H

    2009-01-01

    The conclusion of the classical ham sandwich theorem of Banach and Steinhaus may be strengthened: there always exists a common bisecting hyperplane that touches each of the sets, that is, intersects the closure of each set. Hence, if the knife is smeared with mayonnaise, a cut can always be made so that it will not only simultaneously bisect each of the ingredients, but it will also spread mayonnaise on each. A discrete analog of this theorem says that n finite nonempty sets in n-dimensional Euclidean space can always be simultaneously bisected by a single hyperplane that contains at least one point in each set. More generally, for n compactly-supported positive finite Borel measures in Euclidean n-space, there is always a hyperplane that bisects each of the measures and intersects the support of each measure.

  9. 1/3 SUBHARMONIC SOLUTION OF ELLIPTICAL SANDWICH PLATES

    Institute of Scientific and Technical Information of China (English)

    李银山; 张年梅; 杨桂通

    2003-01-01

    The problem of nonlinear forced oscillations for elliptical sandwich plates is dealtwith. Based on the governing equations expressed in terms of five displacement components,the nonlinear dynamic equation of an elliptical sandwich plate under a harmonic force isderived. A superpositive-iterative harmonic balance ( SIHB ) method is presented for thesteady-state analysis of strongly nonlinear oscillators. In a periodic oscillation, the periodicsolutions can be expressed in the form of basic harmonics and bifurcate harmonics. Thus,an oscillation system which is described as a second order ordinary differential equation,can be expressed as fundamental differential equation with fundamental harmonics andincremental differential equation with derived harmonics. The 1/3 subharnonic solution ofan elliptical sandwich plate is investigated by using the methods of SIHB. The SIHB methodis compared with the numerical integration method. Finally, asymptotical stability of the1/3 subharmonic oscillations is inspected.

  10. Sandwich complex-containing macromolecules: property tunability through versatile synthesis.

    Science.gov (United States)

    Abd-El-Aziz, Alaa S; Agatemor, Christian; Etkin, Nola

    2014-03-01

    Sandwich complexes feature unique properties as the physical and electronic properties of a hydrocarbon ligand or its derivative are integrated into the physical, electronic, magnetic, and optical properties of a metal. Incorporation of these complexes into macromolecules results in intriguing physical, electrical, and optical properties that were hitherto unknown in organic-based macromolecules. These properties are tunable through well-designed synthetic strategies. This review surveys many of the synthetic approaches that have resulted in tuning the properties of sandwich complex-containing macromolecules. While the past two decades have seen an ever-growing number of research publications in this field, gaps remain to be filled. Thus, we expect this review to stimulate research interest towards bridging these gaps, which include the insolubility of some of these macromolecules as well as expanding the scope of the sandwich complexes. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Identification of material properties of sandwich structure with piezoelectric patches

    Directory of Open Access Journals (Sweden)

    Zemčík R.

    2008-11-01

    Full Text Available The work focuses on light-weight sandwich structures made of carbon-epoxy skins and foam core which have unique bending stiffness compared to conventional materials. The skins are manufactured by vacuum autoclave technology from unidirectional prepregs and the sandwich is then glued together. The resulting material properties of the structure usually differ from those provided by manufacturer or even those obtained from experimental tests on separate materials, which makes computational models unreliable. Therefore, the properties are identified using the combination of experimental analysis of the sandwich with attached piezoelectric transducer and corresponding static and modal finite element analyses. Simple mathematical optimization with repetitive finite element solution is used. The model is then verified by transient analysis when the piezoelectric patch is excited by harmonic signals covering the first two eigen-frequencies and the induced oscillations are measured by laser sensor.

  12. Microtomography with sandwich detectors for small-animal bone imaging

    Science.gov (United States)

    Kim, S. H.; Kim, D. W.; Kim, D.; Youn, H.; Cho, S.; Kim, H. K.

    2016-10-01

    An x-ray radiographic system consisting of two detectors in tandem, or a sandwich detector, can produce dual-energy image from a single-shot exposure. Subtraction of two images obtained from the two detectors can produce a sharper image through an unsharp masking effect if the two images are formed at different spatial resolutions. This is indeed possible by incorporating different thicknesses of x-ray conversion layers in the detectors. In this study, we have developed a microtomography system with a sandwich detector in pursuit of high-resolution bone-enhanced small-animal imaging. The results show that the bone-enhanced images reconstructed from the dual-energy projection data provide higher visibility of bone details than the conventionally reconstructed images. The microtomography with the single-shot dual-energy sandwich detector will be useful for the high-resolution bone-enhanced small-animal imaging.

  13. Free vibration Analysis of Sandwich Plates with cutout

    Science.gov (United States)

    Mishra, N.; Basa, B.; Sarangi, S. K.

    2016-09-01

    This paper presents the free vibration analysis of sandwich plates with cutouts. Cutouts are inevitable in structural applications and the presence of these cutouts in the structures greatly influences their dynamic characteristics. A finite element model has been developed here using the ANSYS 15.0 software to study the free vibration characteristics of sandwich plates in the presence of cutouts. Shell 281 element, an 8-noded element with six degrees of freedom suited for analyzing thin to moderately thick structures is considered in the development of the model. Block Lanczose method is adopted to extract the mode shapes to obtain the natural frequency corresponding to free vibration of the plate. The effects of parametric variation on the natural frequency of the sandwich plates with cutout are studied and results are presented.

  14. Enhanced Performance of Sandwich Structures by Improved Damage Tolerance

    DEFF Research Database (Denmark)

    Martakos, Georgios

    The PhD thesis investigates the enhancement of the damage tolerance of sandwich structures by the embedding of a new type of core inserts that act as face/core interface crack stopping elements. The thesis presents series of experimental investigations where the new crack stopping elements...... are embedded in both sandwich beam and panel specimens. The experimental observations form the basis for evaluating the efficiency of the proposed crack stopping inserts. For the experiments, Digital Image Correlation (DIC) was used to characterize the measure the local strain fields and overall deformation...... behaviour around the new crack stopper elements. In support for the experimental investigations, a Finite Element (FE) analysis based methodology, including fracture mechanics analysis and the so-called ‘cycle jump’ technique, was developed to predict the progression of damage in sandwich specimens...

  15. ANALISIS KERAGAAN PANEL SANDWICH UNTUK RUMAH PRA-PABRIKASI

    Directory of Open Access Journals (Sweden)

    Naresworo Nugroho

    2010-12-01

    Full Text Available In the last five years, several earthquakes struck several places in Indonesia and thousands of people died caused of their masonry house. Therefore, the idea of bamboo utilization in the form of structural sandwich panel components for anti-seismic pre-fabrication house is one of appropriate way out. This research describes the performance and behavior of engineered structure wooden-bamboo sandwich panel in full sized test. The wall frame being use were meranti wood, this frame attached by plywood as face and back, then 5 cm bamboo cutting as core; the fastener used in this study were isocyanate resin and nails. This study carried out by experimental data of full scale structural tests on shear wall (ISO 22452. These result showed that the seismic reliability of the wall frame system made of bamboo sandwich panel was appropriate and will be useful for pre-fabrication houses as anti-seismic and environment friendly residential building

  16. Study on voids of epoxy matrix composites sandwich structure parts

    Science.gov (United States)

    He, Simin; Wen, Youyi; Yu, Wenjun; Liu, Hong; Yue, Cheng; Bao, Jing

    2017-03-01

    Void is the most common tiny defect of composite materials. Porosity is closely related to composite structure property. The voids forming behaviour in the composites sandwich structural parts with the carbon fiber reinforced epoxy resin skins was researched by adjusting the manufacturing process parameters. The composites laminate with different porosities were prepared with the different process parameter. The ultrasonic non-destructive measurement method for the porosity was developed and verified through microscopic examination. The analysis results show that compaction pressure during the manufacturing process had influence on the porosity in the laminate area. Increasing the compaction pressure and compaction time will reduce the porosity of the laminates. The bond-line between honeycomb core and carbon fiber reinforced epoxy resin skins were also analyzed through microscopic examination. The mechanical properties of sandwich structure composites were studied. The optimization process parameters and porosity ultrasonic measurement method for composites sandwich structure have been applied to the production of the composite parts.

  17. Examination of Sandwich Materials Using Air-Coupled Ultrasonics

    DEFF Research Database (Denmark)

    Borum, K.K.; Berggreen, Carl Christian

    2004-01-01

    The air-coupled ultrasonic techniques have been improved drastically in recent years. Better equipment has made this technique much more useful. This paper focuses on the examination of sandwich materials used in naval ships. It is more convenient to be able to make the measurements directly...... in atmospheric air instead of using immersion technique. The air-coupled techniques have been used in through-transmission mode using separate sender and receiver transducer. The frequency was either 50 kHz or 120 kHz. Laboratory tests on glass fibre/PVC foam core sandwich panels showed that debonds between core...... and skin laminate could be found by the air-coupled technique. It was therefore decided to use this technique in-situ during mechanical testing of sandwich panels. These tests were done in order to verify a developed FEM code using interfacial fracture mechanics and illustrated on a superstructure...

  18. Effect of layer length on deflection in sandwich beams

    Science.gov (United States)

    Abbu, Muthanna A.; AL-Ameri, Riyadh

    2017-09-01

    A theoretical study has been carried out on sandwich beams strengthened mechanically by two external steel plates attached to their tension and compression sides with so-called "shear connectors ". This study is based on the individual behaviour of each component of the composite sandwich section (i.e. reinforced concrete beam and upper steel plate and lower steel plate). The approach has been developed to simulate the behaviour of such beams, and is based on neglecting the separation between the three layers; i.e., the deflections are equal in each element through the same section. The differential equations reached were solved analytically. Deflection was calculated by using the approach for several beams, tested in two series, and close agreements were obtained with the experimental values. Furthermore, the interaction efficiency between the three elements in a composite sandwich beam has been considered thoroughly, from which the effect of some parameters, such as plate length upon the behaviour of such beams, were studied.

  19. ['Sandwich PhD': considerations for a successful experience abroad].

    Science.gov (United States)

    Salvetti, Marina de Goes; Bueno, Mariana; Gastaldo, Denise; Kimura, Amélia Fumiko; Pimenta, Cibele Andrucioli de Mattos

    2013-03-01

    International PhD internship, named "Sandwich PhD" in Brazil is an opportunity to improve research abilities, to become known in academic area and to establish and/or increase work opportunities in an international context. In this article, we describe key factors regarding the planning and development of the "Sandwich PhD" as experienced by professors and students involved in the collaboration between the School of Nursing, University of São Paulo and Lawrence S. Bloomberg Faculty of Nursing, University of Toronto, Canada. We also present the participation of PhD students' network as an alternative to the "Sandwich PhD". An international experience, when well-planned and developed correctly, promotes students' personal and professional development and favors the internationalization of Brazilian graduate programs and research groups.

  20. Extended high order sandwich panel theory for bending analysis of sandwich beams with carbon nanotube reinforced face sheets

    Science.gov (United States)

    Jedari Salami, S.

    2016-02-01

    Bending analysis of a sandwich beam with soft core and carbon nanotube reinforced composite (CNTRC) face sheets in the literature is presented based on Extended High order Sandwich Panel Theory (EHSAPT). Distribution of fibers through the thickness of the face sheets could be uniform or functionally graded (FG). In this theory the face sheets follow the first order shear deformation theory (FSDT). Besides, the two dimensional elasticity is used for the core. The field equations are derived via the Ritz based solution which is suitable for any essential boundary condition. The influences of boundary conditions on bending response of the sandwich panel with soft core and CNTRC face sheet are investigated. In each type of boundary condition the effect of distribution pattern of CNTRCs on many essential involved parameters of the sandwich beam with functionally graded carbon nanotube reinforced composite (FG- CNTRC) face sheets are studied in detail. Finally, experimental result have been compared with those obtained based on developed solution method. It is concluded that, the sandwich beam with X distribution figure of face sheets is the strongest with the smallest transverse displacement, and followed by the UD, O and ∧-ones, respectively.

  1. 用于造船的夹层板构件(SPS)%A new concept for a new age Sandwich Plate System (SPS) for shipbuilding

    Institute of Scientific and Technical Information of China (English)

    黄沛成

    2005-01-01

    The revolutionary Sandwich Plate System (SPS) is superior in every practical way to conventional, stiffened steel plate. A totally new concept in heavy engineering construction, SPS, a steelelastomer-steel structural laminate, is a new-generation building material bringing the shipbuilding and civil engineering industries to the threshold of a new era.

  2. Methods for Using Durable Adhesively Bonded Joints for Sandwich Structures

    Science.gov (United States)

    Smeltzer, Stanley S., III (Inventor); Lundgren, Eric C. (Inventor)

    2016-01-01

    Systems, methods, and apparatus for increasing durability of adhesively bonded joints in a sandwich structure. Such systems, methods, and apparatus includes an first face sheet and an second face sheet as well as an insert structure, the insert structure having a first insert face sheet, a second insert face sheet, and an insert core material. In addition, sandwich core material is arranged between the first face sheet and the second face sheet. A primary bondline may be coupled to the face sheet(s) and the splice. Further, systems, methods, and apparatus of the present disclosure advantageously reduce the load, provide a redundant path, reduce structural fatigue, and/or increase fatigue life.

  3. NONLINEAR VIBRATION OF CIRCULAR SANDWICH PLATES UNDER CIRCUMJACENT LOAD

    Institute of Scientific and Technical Information of China (English)

    DU Guo-jun; MA Jian-qing

    2006-01-01

    Based on yon Karman plate theory, the issue about nonlinear vibration for circular sandwich plates under circumjacent load with the loosely clamped boundary condition was researched. Nonlinear differential eigenvalue equations and boundary conditions of the problem were formulated by variational method and then their exact static solution can be got. The solution was derived by modified iteration method, so the anslytic relations between amplitude and nonlinear oscillating frequency for circular sandwich plates were obtained. When circumjacent load makes the lowest natural frequency zero,critical load is obtained.

  4. Electronic States in Quasi-one-Dimensional Copolymeric Sandwich Structures

    Institute of Scientific and Technical Information of China (English)

    刘德胜; 王鹿霞; 魏建华; 郑斌; 解士杰; 韩圣浩; 梅良模

    2001-01-01

    The electronic properties of xPA/nPPP/yPA sandwiched copo]ymers with a well-barrier-well structure have been studied by using a tight-binding calculation. It was found that the electronic properties of the neutral states of these sandwiched copolymers are sensitive to the constitutions of PPP and PA monomers and the interface coupling between PA and PPP. It is verified that the quantum tunnelling effect will occur at the lowest conductive state of xPA/nPPP/xPA copolymers.

  5. A New Silicon-Based Ferroelectric Sandwich Structure

    Institute of Scientific and Technical Information of China (English)

    任天令; 张林涛; 刘理天; 李志坚

    2001-01-01

    A new silicon-based PbTiO3/Pb(Zr0.53 Ti0.47)O3/PbTiO3 sandwich structure is fabricated by a sol-gel method. Compared with other fabrication processes without PbTiO3 buffer layers, the annealing temperature is greatly reduced by as much as 100℃. Capacitance-voltage, polarization-electric field and dielectric-frequency properties of this sandwich structure are studied. The Pb(Zrx Ti1-x)O3 films are proved to have good dielectric and ferroelectric properties.

  6. New-sandwiched hydrogen separation membranes with low environmental impact

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Y.; Ozaki, T.; Komaki, M.; Nishimura, C. [Eco-Energy Materials Group, Ecomaterials Center, Ibaraki (Japan)

    2003-07-01

    There is a strong interest in economical methods for hydrogen separation. In this work, we have developed sandwiched membranes, Pd-Ag/V-15Ni/Pd-Ag, which had much lower environmental impact than palladium-based membranes, which are the most commonly used membrane for the current production of highly pure hydrogen. The Pd-Ag overlayer was prepared on V-15Ni substrates (thickness 40 {mu}m) using multi-target sputtering. The hydrogen permeation of the Pd-Ag/V-15Ni/Pd-Ag sandwiched membranes was examined using gas permeation technology. (orig.)

  7. Friction stir welding (FSW of aluminium foam sandwich panels

    Directory of Open Access Journals (Sweden)

    M. Bušić

    2016-07-01

    Full Text Available The article focuses on the influence of welding speed and tool tilt angle upon the mechanical properties at the friction stir welding of aluminium foam sandwich panels. Double side welding was used for producing butt welds of aluminium sandwich panels applying insertion of extruded aluminium profile. Such insertion provided lower pressure of the tool upon the aluminium panels, providing also sufficient volume of the material required for the weldment formation. Ultimate tensile strength and flexural strength for three-point bending test have been determined for samples taken from the welded joints. Results have confirmed anticipated effects of independent variables.

  8. Buckling analysis of sandwich plate using layer wise theory

    Energy Technology Data Exchange (ETDEWEB)

    Ranjbaran, Arash; Khoshravan, Mohammad Reza [University of Tabriz, Tabriz (Iran, Islamic Republic of); Kharazi, Mahsa [Sahand University of Technology, Sahand (Iran, Islamic Republic of)

    2014-07-15

    Buckling analysis of sandwich plate was investigated using layer wise method. The formulation was based on the first-order shear deformation theory, and the Rayleigh-Ritz method was used for approximating and determining the displacement field. The results obtained from layer wise theory was compared with finite element results and showed good agreement. This study demonstrated that layer wise theory could describe buckling behavior of sandwich plates with high accuracy and represents a more realistic and acceptable description of behavior of the plates with much less computational cost.

  9. Damage assessment of compression loaded debond damaged sandwich panels

    DEFF Research Database (Denmark)

    Moslemian, Ramin; Berggreen, Christian; Quispitupa, Amilcar;

    2010-01-01

    Sandwich composites with face sheets of fiber-reinforced plastics (FRP) and cores of polymer foam offer a lightweight construction that is well suited to wind turbine blades, naval and other vessels for high-speed operation or where payload considerations require that the structural weight...... with an implanted circular face/core debond. Compression tests were conducted on intact sandwich panels and panels with an implanted circular face/core debond with three different types of foam core materials (PVC H130, PVC H250 and PMI 51-IG). The strains and out-of-plane displacements of the debonded region were...

  10. Fabrication and characterization of sandwiched optical fibers with periodic gratings.

    Science.gov (United States)

    Chiang, Chia-Chin

    2010-08-01

    This study proposes a novel process for fabricating a sandwiched long-period fiber grating (SLPFG) using a SU-8 thick photoresist technique. The SLPFG consists of a thin cladding optical fiber sandwiched with a double-sided periodical grating coating. By varying the external loads on the SLPFG, the transmission dip of the resonance wavelength is tuned according to a squared-harmonic curve. The SLPFG can thus be utilized as a loss tunable filter or sensor. The resonance dip wavelength is related to the cladding thicknesses of the optical fiber and the periods of the grating. A maximum transmission resonant dip of 34.61dB was achieved.

  11. The effect of sandwiched Ag in the wall of TiO{sub 2} nanotube on the photo-catalytic performance

    Energy Technology Data Exchange (ETDEWEB)

    Liu Zhaohui [Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640 (China); Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Chen Jinzhu [Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640 (China); Zhang Yuyuan; Wu Liangpeng [Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640 (China); Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Li Xinjun, E-mail: lixj@ms.giec.ac.cn [Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640 (China)

    2011-07-15

    Highlights: {yields} TiO{sub 2} nanotube with the wall sandwiched by Ag was prepared. {yields} The sandwiched nanotube structure exhibits enhanced photo-catalytic performance. {yields} Improved photoelectrochemical performance is due to effective charge separation. - Abstract: TiO{sub 2} nanotube was synthesized by a hydrothermal process using TiO{sub 2} nanoparticle as starting material, and then it was loaded with Ag through a silver mirror reaction. Further, the Ag loading TiO{sub 2} nanotube was decorated by TiO{sub 2} via TiCl{sub 4} hydrolysis to obtain the TiO{sub 2} nanotube with the wall sandwiched by Ag. The TiO{sub 2} nanotubes were characterized by transmission electron microscope, energy dispersive X-ray spectroscopy, X-ray diffraction and UV-vis spectrophotometer. The electrochemical impedance spectroscopy and transient photocurrent were investigated in a three-electrode system with the TiO{sub 2} nanotube films served as photoanodes. The photo-catalytic activity was evaluated by photo-degradation of methyl orange under UV light irradiation. The results show that the sandwiched Ag could inhibit the crystal phase transformation of TiO{sub 2} nanotube from anatase to rutile. And the sandwiched nanotube structure exhibits enhanced photo-catalytic performance due to the efficient separation of the photo-generated carriers.

  12. Comparisons of SHM Sensor Models with Empirical Test Data for Sandwich Composite Structures

    Science.gov (United States)

    2011-09-01

    propagation in a honeycomb sandwich panel was done by Metis Design Inc. in collaboration with ARC NASA . The sandwich panel fabricated for this test...structures. Sandwich type composites are being studied for use in NASAs new heavy lift launch vehicle and flaw detection is crucial for safety and for...and at the Marshall Space Flight Center to examine acoustic wave propagating and the ability to detect intrinsic faults in sandwich type composite

  13. Stabilization of nonlinear sandwich systems via state feedback-Discrete-time systems

    NARCIS (Netherlands)

    Wang, Xu; Stoorvogel, Anton A.; Saberi, Ali; Grip, H°avard Fjær; Sannuti, Peddapullaiah

    2011-01-01

    A recent paper (IEEE Trans. Aut. Contr. 2010; 55(9):2156–2160) considered stabilization of a class of continuous-time nonlinear sandwich systems via state feedback. This paper is a discrete-time counterpart of it. The class of nonlinear sandwich systems consists of saturation elements sandwiched bet

  14. A modified DCB sandwich specimen for measuring mixed-mode cohesive laws

    DEFF Research Database (Denmark)

    Lundsgaard-Larsen, Christian; Sørensen, Bent F.; Berggreen, Christian;

    2008-01-01

    A test method is described for measuring cohesive laws for interfaces in sandwich structures. It is proposed to increase the bending stiffness of the sandwich faces by adhering steel bars onto the sandwich faces. This stiffening reduces rotations and ensures that the method is applicable for thin...... which mixed-mode cohesive laws are extracted....

  15. A novel sandwich-type traveling wave piezoelectric tracked mobile system.

    Science.gov (United States)

    Wang, Liang; Shu, Chengyou; Zhang, Quan; Jin, Jiamei

    2017-03-01

    In this paper, a novel sandwich-type traveling wave piezoelectric tracked mobile system was proposed, designed, fabricated and experimentally investigated. The proposed system exhibits the advantages of simple structure, high mechanical integration, lack of electromagnetic interference, and lack of lubrication requirement, and hence shows potential application to robotic rovers for planetary exploration. The tracked mobile system is comprised of a sandwich actuating mechanism and a metal track. The actuating mechanism includes a sandwich piezoelectric transducer and two annular parts symmetrically placed at either end of the transducer, while the metal track is tensioned along the outer surfaces of the annular parts. Traveling waves with the same rotational direction are generated in the two annular parts, producing the microscopic elliptical motions of the surface particles on the annular parts. In this situation, if the pre-load is applied properly, the metal track can be driven by friction force to achieve bidirectional movement. At first, the finite element method was adopted to conduct the modal analysis and harmonic response analysis of the actuating mechanism, and the vibration characteristics were measured to confirm the operating principle. Then the optimal driving frequency of the system prototype, namely 35.1kHz, was measured by frequency sensitivity experiments. At last, the mechanical motion characteristics of the prototype were investigated experimentally. The results show that the average motion speeds of the prototype in dual directions were as 72mm/s and 61.5mm/s under the excitation voltage of 500VRMS, respectively. The optimal loading weights of the prototype in bi-directions were 0.32kg and 0.24kg with a maximum speed of 59.5mm/s and 61.67mm/s at the driving voltage of 300VRMS, respectively.

  16. Relaxed SiGe-on-insulator fabricated by dry oxidation of sandwiched Si/SiGe/Si structure

    Energy Technology Data Exchange (ETDEWEB)

    Di Zengfeng [Research Center of Semiconductor Functional Film Engineering Technology and State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050 (China); Department of Physics and Material Science, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong (China); Zhang Miao [Research Center of Semiconductor Functional Film Engineering Technology and State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050 (China); Liu Weili [Research Center of Semiconductor Functional Film Engineering Technology and State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050 (China); Zhu Ming [Research Center of Semiconductor Functional Film Engineering Technology and State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050 (China); Department of Physics and Material Science, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong (China); Lin Chenglu [Research Center of Semiconductor Functional Film Engineering Technology and State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050 (China); Chu, Paul K. [Department of Physics and Material Science, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong (China)]. E-mail: paul.chu@cityu.edu.hk

    2005-12-05

    An improved technique is demonstrated to fabricate silicon-germanium on insulator (SGOI) starting with a sandwiched structure of Si/SiGe/Si. After oxidation of the sandwiched structure and successive annealing, a relaxed SiGe-on-insulator (SGOI) structure is produced. Our results indicate that the added Si cap layer is advantageous in suppressing Ge loss at the initial stage of SiGe oxidation and the subsequent annealing process homogenizes the Ge fraction. Raman measurements reveal that the strain in the SiGe layer is fully relaxed at high oxidation temperature ({approx}1150 deg. C) without generating any threading dislocations and crosshatch patterns, which generally exist in the relaxed SiGe layer on bulk Si substrate.

  17. Definable deduction relation

    Institute of Scientific and Technical Information of China (English)

    张玉平

    1999-01-01

    The nonmonotonic deduction relation in default reasoning is defined with fixed point style, which has the many-extension property that classical logic is not possessed of. These two kinds of deductions both have boolean definability property, that is, their extensions or deductive closures can be defined by boolean formulas. A generalized form of fixed point method is employed to define a class of deduction relations, which all have the above property. Theorems on definability and atomless boolean algebras in model theory are essential in dealing with this assertion.

  18. Stiff, Strong Splice For A Composite Sandwich Structure

    Science.gov (United States)

    Schmaling, D.

    1991-01-01

    New type of splice for composite sandwich structure reduces peak shear stress in structure. Layers of alternating fiber orientation interposed between thin ears in adhesive joint. Developed for structural joint in spar of helicopter rotor blade, increases precision of control over thickness of adhesive at joint. Joint easy to make, requires no additional pieces, and adds little weight.

  19. Bending and Deformation of Sandwich Panels Due to Localized Pressure

    Directory of Open Access Journals (Sweden)

    Bambang K. Hadi

    2005-05-01

    Full Text Available Bending and deformation of sandwich panels due to localized pressure were analyzed using both Rayleigh-Ritz and finite element methods. The faces were made of laminated composite plates, while the core was a honeycomb material. Carbon fiber and glass fiber reinforced plastics were used for composite plate faces. In the case of Rayleigh-Ritz method, first the total energy of the system was calculated and then taking the variations of the total energy, the sandwich panel deflections could be computed. The deflections were assumed by means of Fourier series. A finite element code NASTRAN was exploited extensively in the finite element method. 3-dimensional 8-node brick elements were used to model sandwich panels, for both the faces sheets and the core. The results were then compared to each other and in general they are in good agreements. Dimple phenomena were found in these cases. It shows that localized pressure on sandwich structures will produce dimple on the pressurize region with little effects on the rest of the structures.

  20. Mechanical Behavior of CFRP Lattice Core Sandwich Bolted Corner Joints

    Science.gov (United States)

    Zhu, Xiaolei; Liu, Yang; Wang, Yana; Lu, Xiaofeng; Zhu, Lingxue

    2017-02-01

    The lattice core sandwich structures have drawn more attention for the integration of load capacity and multifunctional applications. However, the connection of carbon fibers reinforced polymer composite (CFRP) lattice core sandwich structure hinders its application. In this paper, a typical connection of two lattice core sandwich panels, named as corner joint or L-joint, was investigated by experiment and finite element method (FEM). The mechanical behavior and failure mode of the corner joints were discussed. The results showed that the main deformation pattern and failure mode of the lattice core sandwich bolted corner joints structure were the deformation of metal connector and indentation of the face sheet in the bolt holes. The metal connectors played an important role in bolted corner joints structure. In order to save the calculation resource, a continuum model of pyramid lattice core was used to replace the exact structure. The computation results were consistent with experiment, and the maximum error was 19%. The FEM demonstrated the deflection process of the bolted corner joints structure visually. So the simplified FEM can be used for further analysis of the bolted corner joints structure in engineering.

  1. Electronic transport in nanoparticle monolayers sandwiched between graphene electrodes.

    Science.gov (United States)

    Lu, Chenguang; Zhang, Datong; van der Zande, Arend; Kim, Philip; Herman, Irving P

    2014-11-06

    Graphene/CdSe nanoparticle monolayer/graphene sandwich structures were fabricated to explore the interactions between these layered materials. Electrical transport across these heterostructures suggests that transport is limited by tunneling through the nanoparticle (NP) ligands but not the NP core itself. Photoconductivity suggests ligands may affect the exciton separation efficiency.

  2. Elastic-plastic deformation of sandwich rod on elastic basis

    Institute of Scientific and Technical Information of China (English)

    GU Yu

    2008-01-01

    Sandwich composite material possesses advantages of both light weight and high strength.Although the mechanical behaviors of sandwich composite material with the influence of single external environment have been intensively studied,little work has been done in the study of mechanical property,in view of the nonlinear behavior of sandwich composites in the complicated external environments.In this paper,the problem about the bending of the three-layer elastic-plastic rod located on the elastic base,with a compressibly physical nonlinear core,has been studied.The mechanical response of the designed three-layer elements consisting of two bearing layers and a core has been examined.The complicated problem about curving of the three-layer rod located on the elastic base has been solved.The convergence of the proposed method of elastic solutions is examined to convince that the solution is acceptable.The calculated results indicate that the plasticity and physical nonlinearity of materials have a great influence on the deformation of the sandwich rod on the elastic basis.

  3. Editorial: Sandwiched Between Strasbourg and Karlsruhe: EU Fundamental Rights Protection

    NARCIS (Netherlands)

    Reestman, J.H.; Besselink, L.

    2016-01-01

    Starting out from the notion of the `Verfassungsgerichtsverbund´, coined by the President Vosskuhle of the German Federal Constitutional Court, this contribution sketches the manner in which the European Court of Justice operates, sandwiched in between the European Court of Human Rights that sets a

  4. Electrowetting-driven oscillating drops sandwiched between two substrates

    NARCIS (Netherlands)

    Mampallil, Dileep; Eral, H.B.; Staicu, A.D.; Mugele, F.; Ende, van den D.

    2013-01-01

    Drops sandwiched between two substrates are often found in lab-on-chip devices based on digital microfluidics. We excite azimuthal oscillations of such drops by periodically modulating the contact line via ac electrowetting. By tuning the frequency of the applied voltage, several shape modes can be

  5. Application of Load Carrying Sandwich Elements in Wind Turbine Blades

    DEFF Research Database (Denmark)

    Jensen, Jacob Fisker; Schultz, Jacob Pagh; Berggreen, Carl Christian

    2005-01-01

    . For a single skin design, buckling is critical compared to other design criterions. By introducing sandwich, a significant weight reduction and increased buckling capacity is obtained. Tower clearance now becomes critical. Proper choice of core material and thickness is important to prevent face wrinkling...

  6. Effect of Physical Nonlinearity on Local Buckling in Sandwich Beams

    NARCIS (Netherlands)

    Koissin, Vitaly; Shipsha, Andrey; Skvortsov, Vitaly

    2010-01-01

    This article deals with experimental, theoretical, and FE characterization of the local buckling in foam-core sandwich beams. In the theoretical approach, this phenomena is considered in a periodic formulation (unbounded wrinkle wave); a nonlinear stress—strain response of the face material is accou

  7. Bending moment of galvanized iron glass fiber sandwich panel

    Directory of Open Access Journals (Sweden)

    Gurustal Somnath Swamy

    2016-05-01

    Full Text Available The main objective of this project is to prepare a laminated with Galvanized iron thickness fractions, fiber volume fractions and orientation in the layers of GF were fabricated by hand lay-up method and evaluated for their bending moment properties of the sandwich panel using universal testing machine. This paper theoretically calculates the bending behavior of sandwich panel. The recent need to develop a new range of materials has resulted in the development of high performance lightweight composites with excellent properties. Metal– composite systems consist of alternating layers of metal and fiber-reinforced polymer composites which are bonded by an adhesive. Sandwich beams were tested under Air Bending. Stress-strain and stress-displacement were recorded by using AIMIL UTM. The beam face sheets exhibited a softening non-linearity on the bending side. Experimental results were in good agreement with predictions from simple models. On an overall basis, the sandwich panel exhibited better bending moment performance than the monolithic galvanized iron

  8. The elastic response of sandwich structures to local loading

    NARCIS (Netherlands)

    Koysin, V.; Skvortsov, Vitaly; Krahmalev, Sergey; Shipsha, Andrey

    2004-01-01

    The paper addresses the elastic response of sandwich panels to local static and dynamic loading. The bottom face is assumed to be clamped, so that the overall bending is eliminated. The governing equations are derived using the static Lamé equations for the core and the thin plate Kirchoff–Love

  9. Multiscale Finite-Element Modeling of Sandwich Honeycomb Composite Structures

    Directory of Open Access Journals (Sweden)

    Yu. I. Dimitrienko

    2014-01-01

    Full Text Available The paper presents a developed multi-scale model of sandwich honeycomb structures. The model allows us both to calculate effective elastic-strength characteristics of honeycomb and forced covering of sandwich, and to find a 3D stress-strain state of structures using the threedimensional elastic theory for non- homogeneous media. On the basis of finite element analysis it is shown, that under four-point bending the maximal value of bending and shear stresses in the sandwich honeycomb structures are realized in the zone of applied force and plate support. Here the local stress maxima approximately 2-3 times exceed the “engineering” theoretical plate values of bending and shear stresses in the middle of panel. It is established that at tests for fourpoint bending there is a failure of the honeycomb sandwich panels because of the local adhesion failure rather than because of the covering exfoliation off the honeycomb core in the middle of panel.

  10. Fatigue failure of sandwich beams with face sheet wrinkle defects

    DEFF Research Database (Denmark)

    Leong, Martin Klitgaard; Hvejsel, C.F.; Thomsen, Ole Thybo

    2012-01-01

    This paper presents experimental fatigue results for GFRP face sheet/balsa core sandwich beams with face sheet wrinkle defects, subjected to fully reversed in-plane fatigue loading. An estimate of the fatigue design limit is presented, based on static test results, finite element analyses...

  11. Low-Velocity Impact on Composite Sandwich Plates

    Science.gov (United States)

    1996-07-01

    plate and correct for this error. 3.4 One- and Two-Degree of Freedom Models A single degree of freedom system (figure 3-3a) was used by Caprino et al...Composite Materials, Vol. 26, No. 10: 1523-1535 (1992). 211) Caprino , G., and Teti, R. "Impact and post-impact behavior of foam core sandwich

  12. Fluid Structure Interaction Effect on Sandwich Composite Structures

    Science.gov (United States)

    2011-09-01

    14. SUBJECT TERMS Fluid Structure Interaction, FSI, composite, balsa, low velocity impact, sandwich composites, VARTM , Vacuum Assisted Resin Transfer...11 1. Vacuum Assisted Resin Transfer Molding ( VARTM ) ...................11 2. Procedure...required equipment for VARTM composite production. ..............10 Figure 4. VARTM Lay-up (From [8

  13. Effect of microencapsulated phase change material in sandwich panels

    Energy Technology Data Exchange (ETDEWEB)

    Castellon, Cecilia; Medrano, Marc; Roca, Joan; Cabeza, Luisa F. [GREA Innovacio Concurrent, Edifici CREA, Universitat de Lleida, Pere de Cabrera s/n, 25001 Lleida (Spain); Navarro, Maria E.; Fernandez, Ana I. [Departamento de Ciencias de los Materiales e Ingenieria Metalurgica, Universitat de Barcelona, Marti i Franques 1, 08028 Barcelona (Spain); Lazaro, Ana; Zalba, Belen [Instituto de Investigacion en Ingenieria de Aragon, I3A, Grupo de Ingenieria Termica y Sistemas Energeticos (GITSE), Dpto. Ingenieria Mecanica, Area de Maquinas y Motores Termicos, Universidad de Zaragoza, Campus Politecnico Rio Ebro, Edificio ' ' Agustin de Betancourt,' ' Maria de Luna s/n, 50018 Zaragoza (Spain)

    2010-10-15

    Sandwich panels are a good option as building materials, as they offer excellent characteristics in a modular system. The goal of this study was to demonstrate the feasibility of using the microencapsulated PCM (Micronal BASF) in sandwich panels to increase their thermal inertia and to reduce the energy demand of the final buildings. In this paper, to manufacture the sandwich panel with microencapsulated PCM three different methods were tested. In case 1, the PCM was added mixing the microencapsulated PCM with one of the components of the polyurethane. In the other two cases, the PCM was added either a step before (case 2) or a step after (case 3) to the addition of the polyurethane to the metal sheets. The results show that in case 1 the effect of PCM was overlapped by a possible increase in thermal conductivity, but an increase of thermal inertia was found in case 3. In case 2, different results were obtained due to the poor distribution of the PCM. Some samples showed the effect of the PCM (higher thermal inertia), and other samples results were similar to the conventional sandwich panel. In both cases (2 and 3), it is required to industrialize the process to improve the results. (author)

  14. Dynamic Behaviour of Concrete Sandwich Panel under Blast Loading

    Directory of Open Access Journals (Sweden)

    Dong Yongxiang

    2009-01-01

    Full Text Available Surface contact explosion experiments were performed to study the dynamic behaviour of concrete sandwich panel subjected to blast loading. Experimental results have shown that there are four damage modes explosion cratering, scabbing of the backside, radial cracking induced failure, and circumferential cracking induced failure. It also illustrates that different foam materials sandwiched in the multi-layered medium have an important effect on damage patterns. Due to the foam material, the stress peak decreases one order of magnitude and the duration is more than four times that of the panel without the soft layer by numerical simulation. Additionally, the multi layered medium with concrete foam demonstrates the favourable protective property compared with that of aluminum foam. Meanwhile, the optimal analysis of the thickness of the foam material in the sandwich panel was performed in terms of experimental and numerical analyseis. The proper thickness proportion of soft layer is about 20 percent to the total thickness of sandwich panel under the conditions in this study.Defence Science Journal, 2009, 59(1, pp.22-29, DOI:http://dx.doi.org/10.14429/dsj.59.1480  

  15. Methods for Assessing Honeycomb Sandwich Panel Wrinkling Failures

    Science.gov (United States)

    Zalewski, Bart F.; Dial, William B.; Bednarcyk, Brett A.

    2012-01-01

    Efficient closed-form methods for predicting the facesheet wrinkling failure mode in sandwich panels are assessed. Comparisons were made with finite element model predictions for facesheet wrinkling, and a validated closed-form method was implemented in the HyperSizer structure sizing software.

  16. Flexural Strength of Functionally Graded Nanotube Reinforced Sandwich Spherical Panel

    Science.gov (United States)

    Mahapatra, Trupti R.; Mehar, Kulmani; Panda, Subrata K.; Dewangan, S.; Dash, Sushmita

    2017-02-01

    The flexural behaviour of the functionally graded sandwich spherical panel under uniform thermal environment has been investigated in the present work. The face sheets of the sandwich structure are made by the functionally graded carbon nanotube reinforced material and the core face is made by the isotropic and homogeneous material. The material properties of both the fiber and matrix are assumed to be temperature dependent. The sandwich panel model is developed in the framework of the first order shear deformation theory and the governing equation of motion is derived using the variational principle. For the discretization purpose a suitable shell element has been employed from the ANSYS library and the responses are computed using a parametric design language (APDL) coding. The performance and accuracy of the developed model has been established through the convergence and validation by comparing the obtained results with previously published results. Finally, the influence of different geometrical parameters and material properties on the flexural behaviour of the sandwich spherical panel in thermal environment has been investigated through various numerical illustrations and discussed in details.

  17. Effect of Physical Nonlinearity on Local Buckling in Sandwich Beams

    NARCIS (Netherlands)

    Koysin, V.; Shipsha, Andrey; Skvortsov, Vitaly

    2010-01-01

    This article deals with experimental, theoretical, and FE characterization of the local buckling in foam-core sandwich beams. In the theoretical approach, this phenomena is considered in a periodic formulation (unbounded wrinkle wave); a nonlinear stress—strain response of the face material is accou

  18. Damage tolerance of a composite sandwich with interleaved foam core

    Science.gov (United States)

    Ishai, Ori; Hiel, Clement

    1992-01-01

    A composite sandwich panel consisting of carbon fiber-reinforced plastic (CFRP) skins and a syntactic foam core was selected as an appropriate structural concept for the design of wind tunnel compressor blades. Interleaving of the core with tough interlayers was done to prevent core cracking and to improve damage tolerance of the sandwich. Simply supported sandwich beam specimens were subjected to low-velocity drop-weight impacts as well as high velocity ballistic impacts. The performance of the interleaved core sandwich panels was characterized by localized skin damage and minor cracking of the core. Residual compressive strength (RCS) of the skin, which was derived from flexural test, shows the expected trend of decreasing with increasing size of the damage, impact energy, and velocity. In the case of skin damage, RCS values of around 50 percent of the virgin interleaved reference were obtained at the upper impact energy range. Based on the similarity between low-velocity and ballistic-impact effects, it was concluded that impact energy is the main variable controlling damage and residual strength, where as velocity plays a minor role.

  19. Modular container assembled from fiber reinforced thermoplastic sandwich panels

    Science.gov (United States)

    Donnelly, Mathew William; Kasoff, William Andrew; Mcculloch, Patrick Carl; Williams, Frederick Truman

    2007-12-25

    An improved, load bearing, modular design container structure assembled from thermoformed FRTP sandwich panels in which is utilized the unique core-skin edge configuration of the present invention in consideration of improved load bearing performance, improved useful load volume, reduced manufacturing costs, structural weight savings, impact and damage tolerance and repair and replace issues.

  20. Flexural Behavior of Aluminum Honeycomb Core Sandwich Structure

    Science.gov (United States)

    Matta, Vidyasagar; Kumar, J. Suresh; Venkataraviteja, Duddu; Reddy, Guggulla Bharath Kumar

    2017-05-01

    This project is concerned with the fabrication and flexural testing of aluminium honey comb sandwich structure which is a special case of composite materials that is fabricated by attaching two thin but stiff skins to a light weight but thick core. The core material is normally low density material but its high thickness provide the sandwich composite with high bonding stiffness. Honeycomb core are classified into two types based on the materials and structures. Hexagonal shape has a unique properties i.e has more bonding strength and less formation time based on the cell size and sheet thickness. Sandwich structure exhibit different properties such as high load bearing capacity at low weight and has excellent thermal insulation. By considering the above properties it has tendency to minimize the structural problem. So honey comb sandwich structure is choosed. The core structure has a different applications such as aircraft, ship interiors, construction industries. As there is no proper research on strength characteristics of sandwich structure. So, we use light weight material to desire the strength. There are different parameters involved in this structure i.e cell size, sheet thickness and core height. In this project we considered 3 level of comparison among the 3 different parameters cell size of 4, 6 and 8 mm, sheet thickness of 0.3, 0.5 and 0.7 mm, and core height of 20,25 and 30 mm. In order to reduce the number of experiment we use taguchi design of experiment, and we select the L8 orthogonal array is the best array for this type of situation, which clearly identifies the parameters by independent of material weight to support this we add the minitab software, to identify the main effective plots and regression equation which involves the individual response and corresponding parameters. Aluminium material is used for the fabrication of Honeycomb sandwich structure among the various grades of aluminium we consider the AL6061 which is light weight material

  1. Ageing tests study on wood-based sandwich panels

    Directory of Open Access Journals (Sweden)

    Mateo, Raquel

    2011-12-01

    Full Text Available Composite lightweight wood panels are being increasingly used in construction in Spain. Their growing use should be accompanied by necessary guarantees based on studies of their properties. As it is prescriptive and in addition to others tests, in the present work is examinated the durability of these panels when exposed to the climatic conditions, a characteristic of great importance for wood products, according to Guide ETAG 016, the current standard defining the ageing tests to be used. However, due to the use class of this material, there are indications that the testing outlined in this Guide is inappropriate for assessing the ageing of wood-based sandwich panels. Alternative tests are here proposed that recreate rather better the real conditions under which these products are used. Covering the samples in a waterproof sheeting permeable to the outward movement of water vapour, which is in fact used in the installation, provided the best procedure for testing these panels.

    Los paneles sándwich de madera son un producto de creciente aplicación en la edificación de nuestro país. Este ascendente uso del material debe estar acompañado de las garantías necesarias avaladas por un estudio previo de sus prestaciones. Como es preceptivo y entre otros, se evalúa su durabilidad frente a las condiciones climatológicas, clave en los productos derivados de la madera, acorde a la normativa actual definida con tal fin, la Guía ETAG 016. Sin embargo, debido a la clase de uso del material, se ha detectado que dicha normativa tal y como está concebida no es capaz de valorar su envejecimiento adecuadamente. En este trabajo se proponen ensayos alternativos al establecido tras exhaustivos análisis que recrean las condiciones reales de uso y más acordes a los productos de madera. Se concluye que la incorporación de una lámina impermeable pero permeable al vapor de agua hacia el exterior, como las utilizadas en el montaje, aportan el mejor

  2. Primary hepatocyte culture in collagen gel mixture and collagen sandwich

    Institute of Scientific and Technical Information of China (English)

    Ying-Jie Wang; Hong-Ling Liu; Hai-Tao Guo; Hong-Wei Wen; Jun Liu

    2004-01-01

    AIM: To explore the methods of hepatocytes culture in a collagen gel mixture or between double layers of collagen sandwich configuration and to examine the functional and cytomorphological characteristics of cultured hepatocytes.METHODS: A two-step collagenase perfusion technique was used to isolate the hepatocytes from Wistar rats or newborn Chinese experimental piglets. The isolated hepatocytes were cultured in a collagen gel mixture or between double layers of collagen sandwich configuration respectively. The former was that rat hepatocytes were mixed with type I rat tail collagen solution till gelled, and the medium was added onto the gel. The latter was that swine hepatocytes were seeded on a plate precoated with collagen gel for 24 h, then another layer of collagen gel was overlaid, resulting in a sandwich configuration. The cytomorphological characteristics, albumin secretion, and LDH-release of the hepatocytes cultured in these two models were examined.RESULTS: Freshly isolated rat hepatocytes were successfully mixed and fixed in collagen gel, and cultured in the gel condition. During the culture period, the urea synthesized and secreted by rat hepatocytes was detected throughout the period. Likewise, newborn experimental piglet hepatocytes were successfully fixed between the double layers of collagen gel, forming a sandwich configuration.Within a week of culture, the albumin secreted by swine hepatocytes was detected by SDS/PAGE analysis. The typical cytomorphological characteristics of the hepatocytes cultured by the above two culture models were found under a phasecontrast microscope. There was little LDH-release during the culture period.CONCLUSION: Both collagen gel mixture and double layers of collagen sandwich configuration can provide cultural conditions much closer to in vivoenvironment, and are helpful for maintaining specific hepatic fiJnctions and cytomorphological characteristics. A collagen gel mixture culture may be more eligible for the

  3. Cascaded-systems analysis of sandwich x-ray detectors

    Science.gov (United States)

    Kim, D. W.; Kim, J.; Yun, S.; Youn, H.; Kim, H. K.

    2016-12-01

    Active sandwich-like multilayer detectors have been developed, and their potential for motion-artifact-free dual-energy x-ray imaging at a single exposure has been demonstrated in the material decomposition context. Since the sandwich detector uses the x-ray beam transmittance through the front layer, direct x-ray interaction within photodiodes in the front layer is unavoidable, and which can increase noise in the front detector images. Similar direct x-ray interaction can also occur in the rear detector layer. To obtain a better contrast performance, an additional filter layer can be placed between the two detector layers. However, this filter layer can increase adversely noise in images obtained from the rear detector layer by reducing the number of x-ray photons reaching it. A theoretical model, which can describe the signal-to-noise performance of the sandwich detector as functions of various design parameters, has been developed by using a linear cascaded-systems theory. From the cascaded-systems analysis, the direct x-ray interaction increases noise at the high spatial frequencies where the number of secondary quanta lessens. The intermediate filter layer enhances the contribution of additive electronic noise in the overall noise performance of the rear detector layer. The detailed cascaded-systems analysis on the x-ray sandwich detectors are reported in comparisons with the measured noise-power spectra and detective quantum efficiencies. The developed model will be useful for a better design and practical use of a sandwich detector for single-shot dual-energy imaging.

  4. Sandwich ELISA for quantitative detection of human collagen prolyl 4-hydroxylase

    Directory of Open Access Journals (Sweden)

    Myllyharju Johanna

    2010-06-01

    Full Text Available Abstract Background We describe a method for specific, quantitative and quick detection of human collagen prolyl 4-hydroxylase (C-P4H, the key enzyme for collagen prolyl-4 hydroxylation, in crude samples based on a sandwich ELISA principle. The method is relevant to active C-P4H level monitoring during recombinant C-P4H and collagen production in different expression systems. The assay proves to be specific for the active C-P4H α2β2 tetramer due to the use of antibodies against its both subunits. Thus in keeping with the method C-P4H is captured by coupled to an anti-α subunit antibody magnetic beads and an anti-β subunit antibody binds to the PDI/β subunit of the protein. Then the following holoenzyme detection is accomplished by a goat anti-rabbit IgG labeled with alkaline phosphatase which AP catalyzes the reaction of a substrate transformation with fluorescent signal generation. Results We applied an experimental design approach for the optimization of the antibody concentrations used in the sandwich ELISA. The assay sensitivity was 0.1 ng of C-P4H. The method was utilized for the analysis of C-P4H accumulation in crude cell extracts of E. coli overexpressing C-P4H. The sandwich ELISA signals obtained demonstrated a very good correlation with the detected protein activity levels measured with the standard radioactive assay. The developed assay was applied to optimize C-P4H production in E. coli Origami in a system where the C-P4H subunits expression acted under control by different promoters. The experiments performed in a shake flask fed-batch system (EnBase® verified earlier observations that cell density and oxygen supply are critical factors for the use of the inducer anhydrotetracycline and thus for the soluble C-P4H yield. Conclusions Here we show an example of sandwich ELISA usage for quantifying multimeric proteins. The method was developed for monitoring the amount of recombinant C-P4H tetramer in crude E. coli extracts. Due

  5. Mechanical Response of All-composite Pyramidal Lattice Truss Core Sandwich Structures

    Institute of Scientific and Technical Information of China (English)

    Ming Li; Linzhi Wu; Li Ma; Bing Wang; Zhengxi Guan

    2011-01-01

    The mechanical performance of an all-composite pyramidal lattice truss core sandwich structure was investigated both theoretically and experimentally. Sandwich structures were fabricated with a hot compression molding method using carbon fiber reinforced composite T700/3234. The out-of-plane compression and shear tests were conducted. Experimental results showed that the all-composite pyramidal lattice truss core sandwich structures were more weight efficient than other metallic lattice truss core sandwich structures. Failure modes revealed that node rupture dominated the mechanical behavior of sandwich structures.

  6. Elastic stability of superplastically formed/diffusion-bonded orthogonally corrugated core sandwich plates

    Science.gov (United States)

    Ko, W. L.

    1980-01-01

    The paper concerns the elastic buckling behavior of a newly developed superplastically formed/diffusion-bonded (SPF/DB) orthogonally corrugated core sandwich plate. Uniaxial buckling loads were calculated for this type of sandwich plate with simply supported edges by using orthotropic sandwich plate theory. The buckling behavior of this sandwich plate was then compared with that of an SPF/DB unidirectionally corrugated core sandwich plate under conditions of equal structural density. It was found that the buckling load for the former was considerably higher than that of the latter.

  7. High-quality sandwiched black phosphorus heterostructure and its quantum oscillations.

    Science.gov (United States)

    Chen, Xiaolong; Wu, Yingying; Wu, Zefei; Han, Yu; Xu, Shuigang; Wang, Lin; Ye, Weiguang; Han, Tianyi; He, Yuheng; Cai, Yuan; Wang, Ning

    2015-06-23

    Two-dimensional materials such as graphene and transition metal dichalcogenides have attracted great attention because of their rich physics and potential applications in next-generation nanoelectronic devices. The family of two-dimensional materials was recently joined by atomically thin black phosphorus which possesses high theoretical mobility and tunable bandgap structure. However, degradation of properties under atmospheric conditions and high-density charge traps in black phosphorus have largely limited its actual mobility thus hindering its future applications. Here, we report the fabrication of stable sandwiched heterostructures by encapsulating atomically thin black phosphorus between hexagonal boron nitride layers to realize ultra-clean interfaces that allow a high field-effect mobility of ∼1,350 cm(2)V(-1) s(-1) at room temperature and on-off ratios exceeding 10(5). At low temperatures, the mobility even reaches ∼2,700 cm(2)V(-1) s(-1) and quantum oscillations in black phosphorus two-dimensional hole gas are observed at low magnetic fields. Importantly, the sandwiched heterostructures ensure that the quality of black phosphorus remains high under ambient conditions.

  8. Spin current valve effect in normal metal/magnetic insulator/normal metal sandwiches

    Science.gov (United States)

    Li, Junxue; Xu, Yadong; Aldosary, Mohammed; Tang, Chi; Lin, Zhisheng; Zhang, Shufeng; Lake, Roger; Shi, Jing; Shines Collaboration

    Pure spin current is generated in two common ways. One makes use of the spin Hall effect in normal metals (NM), the other utilizes spin waves with the quasi-particle excitations called magnons. A popular material for the latter is yttrium iron garnet (YIG), a magnetic insulator (MI). Here we demonstrate in NM/MI/NM sandwiches that these two types of spin current are interconvertible, which allows transmitting an electrical signal across the MI, predicted as the magnon-mediated current drag phenomenon. We show experimentally that the spin current can be switched ``on'' or ``off'' by controlling the magnetization orientation of MI, analogous to conventional spin valves for spin-polarized charge current. The transmitted current drag signal scales linearly with the driving current without any threshold and follows the power-law Tn with n ranging from 1.5 to 2.5. Our results indicate that the NM/MI/NM sandwich structure can serve as a scalable pure spin current valve device which is an essential ingredient in spintronics. As part of the SHINES, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # SC0012670.

  9. On the assumption of transverse isotropy of a honeycomb sandwich panel for NDT applications

    Science.gov (United States)

    Schaal, Christoph; Tai, Steffen; Mal, Ajit

    2017-04-01

    Due to their excellent strength-to-weight ratio, honeycomb sandwich panels are being increasingly used in lightweight structures, in particular in aircraft and aerospace industry. Delaminations of individual plies in the composite skins or disbonds of a layer in the multi-layer plate structures often remain undetected during visual inspection. Using guided ultrasonic waves, such hidden defects can be detected. For the successful application of ultrasonic nondestructive testing methods, however, wave propagation characteristics have to be well-understood. Recently developed semi-analytical techniques allow for the calculation of dispersion characteristics for many materials. However, the elastic material behavior is often simplified for these calculations. For example, woven composite laminates are modeled as a homogeneous, transversely isotropic plate. While these simplifications only lead to minor errors, the modeling of aluminum honeycomb core sandwich panels with homogeneous, transversely isotropic layers has yet to be validated. In this paper, an efficient numerical approach is used to determine the dispersion characteristics of a honeycomb core layer with and without simplified material behavior. A full 3D-model, including the honeycomb cells, of a small representative volume element of the material is generated using finite elements, and the resulting dispersion curves are compared to the ones obtained from simplified models. In addition to dispersion curves, the displacement fields of the waves are also analyzed.

  10. Interface fatigue crack propagation in sandwich X-joints – Part I: Experiments

    DEFF Research Database (Denmark)

    Moslemian, Ramin; Berggreen, Christian

    2013-01-01

    In this study, face/core fatigue crack growth in sandwich X-joints is investigated numerically and experimentally. The work presented here covers Part I of the study which includes an experimental investigation of fatigue crack growth in sandwich X-joints and characterization of the face/core int......In this study, face/core fatigue crack growth in sandwich X-joints is investigated numerically and experimentally. The work presented here covers Part I of the study which includes an experimental investigation of fatigue crack growth in sandwich X-joints and characterization of the face....../core interface of the joints. Sandwich tear test specimens with a face/core debond representing a debonded sandwich X-joint were tested under cyclic loading. Fatigue tests were conducted on the sandwich tear test specimens with H45, H100 and H250 PVC cores and glass/polyester face sheets. The Digital Image...

  11. Compressive and shear buckling analysis of metal matrix composite sandwich panels under different thermal environments

    Science.gov (United States)

    Ko, William L.; Jackson, Raymond H.

    1993-01-01

    Combined inplane compressive and shear buckling analysis was conducted on flat rectangular sandwich panels using the Raleigh-Ritz minimum energy method with a consideration of transverse shear effect of the sandwich core. The sandwich panels were fabricated with titanium honeycomb core and laminated metal matrix composite face sheets. The results show that slightly slender (along unidirectional compressive loading axis) rectangular sandwich panels have the most desirable stiffness-to-weight ratios for aerospace structural applications; the degradation of buckling strength of sandwich panels with rising temperature is faster in shear than in compression; and the fiber orientation of the face sheets for optimum combined-load buckling strength of sandwich panels is a strong function of both loading condition and panel aspect ratio. Under the same specific weight and panel aspect ratio, a sandwich panel with metal matrix composite face sheets has much higher buckling strength than one having monolithic face sheets.

  12. Outbreak of Salmonella indiana associated with egg mayonnaise sandwiches at an acute NHS hospital.

    Science.gov (United States)

    Mason, B W; Williams, N; Salmon, R L; Lewis, A; Price, J; Johnston, K M; Trott, R M

    2001-12-01

    An outbreak of Salmonella indiana infection in December 2000 affected 17 staff, relatives and patients at an acute NHS Hospital in Swansea. Epidemiological investigation identified egg mayonnaise sandwiches as the vehicle of infection. It was not possible to definitively determine the source of the infection or how the prepared sandwiches became contaminated. The most likely explanation was a pasteurisation failure of a batch of the egg roll used to make these sandwiches. Sandwiches are the most frequently identified vehicle of infection in foodborne outbreaks of salmonella infection in hospitals in England and Wales. The process of sandwich preparation has inherent risks because it involves considerable handling of food, which is consumed without further cooking. Care is required in all stages of preparation including the sourcing of materials used to produce the sandwiches. NHS Trusts should review their Hazard Analysis Critical Control Point plans for sandwich production.

  13. Exact dynamic stiffness matrix for flexural vibration of three-layered sandwich beams

    Science.gov (United States)

    Howson, W. P.; Zare, A.

    2005-04-01

    An exact dynamic member stiffness matrix (exact finite element), which defines the flexural motion of a three-layered sandwich beam with unequal faceplates, is developed from the closed form solution of the governing differential equation. This enables the powerful modelling features associated with the finite element technique to be utilised, including the ability to account for nodal masses, spring support stiffnesses and non-classical boundary conditions. However, such a formulation necessitates the solution of a transcendental eigenvalue problem. This is accomplished using the Wittrick-Williams algorithm, which enables the required natural frequencies to be converged upon to any required accuracy with the certain knowledge that none have been missed. The accuracy of the method is confirmed by comparison with three sets of published results and a final example indicates its range of application.

  14. Conformal-thin-sandwich initial data for a single boosted or spinning black hole puncture

    CERN Document Server

    Laguna, P

    2003-01-01

    Sequences of initial-data sets representing binary black holes in quasi-circular orbits have been used to calculate what may be interpreted as the innermost stable circular orbit. These sequences have been computed with two approaches. One method is based on the traditional conformal-transverse-traceless decomposition and locates quasi-circular orbits from the turning points in an effective potential. The second method uses a conformal-thin-sandwich decomposition and determines quasi-circular orbits by requiring the existence of an approximate helical Killing vector. Although the parameters defining the innermost stable circular orbit obtained from these two methods differ significantly, both approaches yield approximately the same initial data, as the separation of the binary system increases. To help understanding this agreement between data sets, we consider the case of initial data representing a single boosted or spinning black hole puncture of the Bowen-York type and show that the conformal-transverse-t...

  15. Finite element analysis of hypervelocity impact behaviour of CFRP-Al/HC sandwich panel

    Science.gov (United States)

    Phadnis, Vaibhav A.; Silberschmidt, Vadim V.

    2015-09-01

    The mechanical response of CFRP-Al/HC (carbon fibre-reinforced/epoxy composite face sheets with Al honeycomb core) sandwich panels to hyper-velocity impact (up to 1 km/s) is studied using a finite-element model developed in ABAQUS/Explicit. The intraply damage of CFRP face sheets is analysed by mean of a user-defined material model (VUMAT) employing a combination of Hashin and Puck criteria, delamination modelled using cohesive-zone elements. The damaged Al/HC core is assessed on the basis of a Johnson Cook dynamic failure model while its hydrodynamic response is captured using the Mie-Gruneisen equation of state. The results obtained with the developed finite-element model showed a reasonable correlation to experimental damage patterns. The surface peeling of both face sheets was evident, with a significant delamination around the impact location accompanied by crushing HC core.

  16. Hypervelocity Impact Behaviour of CFRP-A1/HC Sandwich Panel: Finite-Element Studies

    Science.gov (United States)

    Phadnis, Vaibhav A.; Roy, Anish; Silberschmidt, Vadim V.

    2014-06-01

    The mechanical response of CFRP-Al/HC (carbon fibre- reinforced/epoxy composite face sheets with Al honeycomb core) sandwich panels to hyper-velocity impact ( 1 km/s) is studied using a finite-element model developed in ABAQUS/Explicit. The intraply damage of CFRP face sheets is analysed by the means of a user-defined material model (VUMAT) employing a combination of Hashin and Puck criteria and delamination is modelled using cohesive-zone elements. The damage of Al/HC core is assessed on the basis of a Johnson-Cook dynamic failure model while its hydrodynamic response is captured using the Mie- Gruneisen equation of state. The results obtained with the developed finite-element model showed a reasonable correlation to experimental damage patterns. The surface peeling of both face sheets was evident, with a significant delamination around the impact location accompanied by crushing of HC core.

  17. Finite element analysis of hypervelocity impact behaviour of CFRP-Al/HC sandwich panel

    Directory of Open Access Journals (Sweden)

    Phadnis Vaibhav A.

    2015-01-01

    Full Text Available The mechanical response of CFRP-Al/HC (carbon fibre-reinforced/epoxy composite face sheets with Al honeycomb core sandwich panels to hyper-velocity impact (up to 1 km/s is studied using a finite-element model developed in ABAQUS/Explicit. The intraply damage of CFRP face sheets is analysed by mean of a user-defined material model (VUMAT employing a combination of Hashin and Puck criteria, delamination modelled using cohesive-zone elements. The damaged Al/HC core is assessed on the basis of a Johnson Cook dynamic failure model while its hydrodynamic response is captured using the Mie-Gruneisen equation of state. The results obtained with the developed finite-element model showed a reasonable correlation to experimental damage patterns. The surface peeling of both face sheets was evident, with a significant delamination around the impact location accompanied by crushing HC core.

  18. Defining Legal Moralism

    DEFF Research Database (Denmark)

    Thaysen, Jens Damgaard

    2015-01-01

    This paper discusses how legal moralism should be defined. It is argued that legal moralism should be defined as the position that “For any X, it is always a pro tanto reason for justifiably imposing legal regulation on X that X is morally wrong (where “morally wrong” is not conceptually equivalent...

  19. Development of a double-monoclonal antibody sandwich ELISA: Tool for chicken interferon-γ detection ex vivo

    Science.gov (United States)

    Dai, Hua; Xu, Zheng-zhong; Wang, Meiling; Chen, Jun-hua; Chen, Xiang; Pan, Zhi-ming; Jiao, Xin-an

    2016-01-01

    The aim of the present work was to develop reagents to set up a chicken interferon-γ (ChIFN-γ) assay. Four monoclonal antibodies (mAbs) specific for ChIFN-γ were generated to establish sandwich ELISA based on 2 different mAbs. To improve the detection sensitivity of ChIFN-γ, a double-monoclonal antibody sandwich ELISA was developed using mAb 3E5 as capture antibody and biotinylated mAb 3E3 as a detection reagent. The results revealed that this ELISA has high sensitivity, allowing for the detection of 125 to 500 pg/mL of recombinant ChIFN-γ, and also has an excellent capacity for detecting native ChIFN-γ. This ELISA was then used to detect ChIFN-γ level in chickens immunized with a Newcastle disease virus (NDV) vaccine, the immunized chicken splenocytes were stimulated by NDV F protein as recall antigen. From our results, it appears that the sensitivity range of this sandwich ELISA test is adequate to measure the ex vivo release of ChIFN-γ. PMID:27127340

  20. Ebolavirus nucleoprotein C-termini potently attract single domain antibodies enabling monoclonal affinity reagent sandwich assay (MARSA formulation.

    Directory of Open Access Journals (Sweden)

    Laura J Sherwood

    Full Text Available BACKGROUND: Antigen detection assays can play an important part in environmental surveillance and diagnostics for emerging threats. We are interested in accelerating assay formulation; targeting the agents themselves to bypass requirements for a priori genome information or surrogates. Previously, using in vitro affinity reagent selection on Marburg virus we rapidly established monoclonal affinity reagent sandwich assay (MARSA where one recombinant antibody clone was both captor and tracer for polyvalent nucleoprotein (NP. Hypothesizing that the closely related Ebolavirus genus may share the same Achilles' heel, we redirected the scheme to see whether similar assays could be delivered and began to explore their mechanism. METHODS AND FINDINGS: In parallel we selected panels of llama single domain antibodies (sdAb from a semi-synthetic library against Zaire, Sudan, Ivory Coast, and Reston Ebola viruses. Each could perform as both captor and tracer in the same antigen sandwich capture assay thereby forming MARSAs. All sdAb were specific for NP and those tested required the C-terminal domain for recognition. Several clones were cross-reactive, indicating epitope conservation across the Ebolavirus genus. Analysis of two immune shark sdAb revealed they also targeted the C-terminal domain, and could be similarly employed, yet were less sensitive than a comparable llama sdAb despite stemming from immune selections. CONCLUSIONS: The C-terminal domain of Ebolavirus NP is a strong attractant for antibodies and enables sensitive sandwich immunoassays to be rapidly generated using a single antibody clone. The polyvalent nature of nucleocapsid borne NP and display of the C-terminal region likely serves as a bountiful affinity sink during selections, and a highly avid target for subsequent immunoassay capture. Combined with the high degree of amino acid conservation through 37 years and across wide geographies, this domain makes an ideal handle for monoclonal

  1. Impact load mitigation in sandwich beams using local resonators

    CERN Document Server

    Sharma, B

    2015-01-01

    Dynamic response of sandwich beams with resonators embedded in the cores subjected to impact loads is studied. Using finite element models the effectiveness of various local resonator frequencies under a given impact load is compared to the behavior of an equivalent mass beam. It is shown that addition of appropriately chosen local resonators into the sandwich beam is an effective method of improving its flexural bending behavior under impact loads. The effect of a given local resonance frequency under different impact load durations is also studied. It is demonstrated that the choice of appropriate local resonance frequency depends on the impact duration. Further, by performing transverse impact experiments, the finite element models are verified and the advantage of using internal resonators under impact loading conditions is demonstrated.

  2. Preserving entanglement under decoherence and sandwiching all separable states

    CERN Document Server

    Lockhart, R B; Lockhart, Robert; Steiner, Michael

    2000-01-01

    Every entangled state can be perturbed, for instance by decoherence, and stay entangled. For a large class of pure entangled states, we show how large the perturbation can be. Our class includes all pure bipartite and all maximally entangled states. For an entangled state, E, the constucted neighborhood of entangled states is the region outside two parallel hyperplanes, which sandwich the set of all separable states. The states for which these neighborhoods are largest are the maximally entangled ones. As the number of particles, or the dimensions of the Hilbert spaces for two of the particles increases, the distance between two of the hyperplanes which sandwich the separable states goes to zero. It is easy to decide if a state Q is in the neighborhood of entangled states we construct for an entangled state E. One merely has to check if the trace of EQ is greater than a constant which depends upon E and which we determine.

  3. Natural fabric sandwich laminate composites: development and investigation

    Indian Academy of Sciences (India)

    C K ARVINDA PANDIAN; H SIDDHI JAILANI; A RAJADURAI

    2017-02-01

    In this work, eco-friendly natural fabric sandwich laminate (NFSL) composites are formulated using jute and linen-fabric-reinforced epoxy with different layer ratios (5:0, 4:1, 3:2, 2:3, 1:4 and 0:5) by hand layup system. Different mechanical attributes (tensile, flexural and impact) of the NFSL composites are quantified. Thermal stability and water absorption behaviour of the NFSL composites are also assessed. A scanning electron microscope (SEM) and optical microscope are used for qualitative analysis of NFSL composites’ interfacial properties. Two layers of jute and three layers of linen sandwich laminate have registered peak values in tensile and impact properties. The five layers of linen laminate composite have exhibited high flexural strength, been proven to have good thermal stability and furthermore shown better water absorption behaviour than any other laminate composites.

  4. Non-linear Behavior of Curved Sandwich Panels

    DEFF Research Database (Denmark)

    Berggreen, Carl Christian; Jolma, P.; Karjalainen, J. P.;

    2003-01-01

    In this paper the non-linear behavior of curved sandwich panels is investigated both numerically and experimentally. Focus is on various aspects of finite element modeling and calculation procedures. A simply supported, singly curved, CFRP/PVC sandwich panel is analyzed under uniform pressure load...... and results are compared to test data. A novel test arrangement utilizing a water filled cushion to create the uniform pressure load on curved panel specimen is used to obtain the experimental data. The panel is modeled with three different commercial finite element codes. Two implicit and one explicit code...... are used with various element types, modeling approaches and material models. The results show that the theoretical and experimental methods generally show fair agreement in panel non-linear behavior before collapse. It is also shown that special attention to detail has to be taken, because the predicted...

  5. Non-Uniform Compressive Strength of Debonded Sandwich Panels

    DEFF Research Database (Denmark)

    Berggreen, Carl Christian; Simonsen, Bo Cerup

    2005-01-01

    This article describes the development, validation and application of a FEM based numerical model for prediction of residual strength of damaged sandwich panels. The core of the theoretical method is a newly developed procedure for prediction of the propagation of a face-core debond. As demonstra......This article describes the development, validation and application of a FEM based numerical model for prediction of residual strength of damaged sandwich panels. The core of the theoretical method is a newly developed procedure for prediction of the propagation of a face-core debond.......(2005)., shows that the model is indeed able to predict the failure modes and the residual strength of damaged panels with accuracy sufficient for practical applications. This opens up for a number of important engineering applications, for example risk-based inspection and repair schemes....

  6. Applications of thin-film sandwich crystallization platforms

    Energy Technology Data Exchange (ETDEWEB)

    Axford, Danny, E-mail: danny.axford@diamond.ac.uk; Aller, Pierre; Sanchez-Weatherby, Juan; Sandy, James [Diamond Light Source, Harwell Oxford, Didcot OX11 0DE (United Kingdom)

    2016-03-24

    Crystallization via sandwiches of thin polymer films is presented and discussed. Examples are shown of protein crystallization in, and data collection from, solutions sandwiched between thin polymer films using vapour-diffusion and batch methods. The crystallization platform is optimal for both visualization and in situ data collection, with the need for traditional harvesting being eliminated. In wells constructed from the thinnest plastic and with a minimum of aqueous liquid, flash-cooling to 100 K is possible without significant ice formation and without any degradation in crystal quality. The approach is simple; it utilizes low-cost consumables but yields high-quality data with minimal sample intervention and, with the very low levels of background X-ray scatter that are observed, is optimal for microcrystals.

  7. Sandwich-like Reconstruction of Anterior Skull Base Defects

    Institute of Scientific and Technical Information of China (English)

    Wang Zheng-min; Wang De-hui

    2001-01-01

    Objective: To evaluate the safety and efficacy of new modality of anterior skull base repair,namely sandwich-like reconstruction of anterior skull base defects. Methods: A retrospective analysis of patients who underwent transcranial or transcranial-facial resections of malignant or benign aggressive tumors involving the anterior skull base was conducted in our department. We used the sandwich-like reconstruction, using pedicled pericranial flap, frontal muscle flap and free abdominal adipose tissue between them, to separate of cranial cavity and aerodigest tract and keep the frontal lobes in place following resections of anterior skull base tumors. Results: From October, 1984 to October, 1998, 116 patients underwent transcranial or transcranialfacial approach for the resection of malignant or aggressive benign tumor, and sandwich-like repairs were performed for the anterior skull base defect. 54 (46.6 % ) patients had previous operation, with a maximum of 5 surgeries. The average age of patients was 35.9 years old, ranging form 6 to 73 years old. Forty-eight (41.4%)patients had malignant neoplasmas, and sixty-eight (58.6%) patients had benign aggressive tumors. In our series, with the maximal follow-ups for as long as 14 years, NO one had early failure of the one-stage reconstruction. CSF fluid leakage was not encountered, nor was ascending bacterial meningitis observed. No immediate or delayed prolapse of dura or frontal lobes was observed. Conclusion: We conclude that the sandwich-like reconstruction, using pericranial flap, frontal muscle flap and free abdominal adipose between them, is an extremely safe and effective procedure for the repair of skull base defect, even when tumor extensively involves anterior skull base.

  8. Sandwich-like Reconstruction of Anterior Skull Base Defects

    Institute of Scientific and Technical Information of China (English)

    WangZheng-min,MD; WangDe-hui,MD

    2001-01-01

    Objective:To evaluate the safety and efficacy of new modality of anterior skull base repair,namely sandwich-like reconstruction of anterior skull base defects. Methods : A retrospective analysis of patients who underwent wanscranial or wanscranial-facial resections of malignant or benign aggressive tumors involving the anterior skull base was conducted in our department. We used the sandwich-like reconstruction, using pedicled pericranial flap, frontal muscle flap and free abdominal adipose tissue between them, to separate of cranial cavity and aerodigest tract and keep the frontal lobes in place following resections of anterior skull base tumors. Results: From October, 1984 to October, 1998, 116 patients underwent tmnscranial or tmnscranial-facial approach for the resection of malignant or aggressive benign tumor, and sandwich-like repairs were performed for the anterior skull base defect.54 (46.6%) patients had previous operation, with a maximum of 5 surgeries. The average age of patients was 35.9 years old, ranging form 6 to 73 years old. Forty-eight (41.4%) patients had malignant neoplasmas, and sixty-eight (58.6%) patients had benign aggressive tumors. In our series, with the maximal follow-ups for as long as 14 years, NO one had early failure of the one-stage reconstruction. CSF fluid leakage was not encountered, nor was ascending bacterial meningitis observed. No immediate or delayed prolapse of dura or frontal lobes was observed. Conclusion: We conclude that the sandwich-like reconstruction, using pericranial flap, frontal muscle flap and free abdominal adipose between them, is an extremely safe and effective procedure for the repair of skull base defect, even when tumor extensively involves anterior skull base.

  9. Residual Strength of In-plane Loaded Debonded Sandwich Panels

    DEFF Research Database (Denmark)

    Lundsgaard-Larsen, Christian; Nøkkentved, Alexandros; Berggreen, Carl Christian

    2005-01-01

    Face/core debond damaged sandwich panels exposed to uniform and non-uniform compression loads are studied experimentally. The panel geometry is full-scale rectangular with a centrally located circular prefabricated debond. The results show a considerable strength reduction with increasing debond...... diameter, with the failure mechanisms varying between buckling driven debond propagation and face compression failure for large and small debonds respectively....

  10. The Generalized Thin-Sandwich Problem and its Local Solvability

    CERN Document Server

    Giulini, D

    1999-01-01

    We consider Einstein Gravity coupled to dynamical matter consisting of a gauge field with any compact gauge group and minimally coupled scalar fields. We investigate the conditions under which a free specification of a spatial field configuration for the total system and its derivative with respect to coordinate-time determines a solution to the field equations (generalized thin-sandwich problem). Sufficient conditions for local solvability (in the space of fields) are established.

  11. An asymptotically exact theory of smart sandwich shells

    CERN Document Server

    Le, Khanh Chau

    2016-01-01

    An asymptotically exact two-dimensional theory of elastic-piezoceramic sandwich shells is derived by the variational-asymptotic method. The error estimation of the constructed theory is given in the energetic norm. As an application, analytical solution to the problem of forced vibration of a circular elastic plate partially covered by two piezoceramic patches with thickness polarization excited by a harmonic voltage is found.

  12. Flexural Behavior of Two-Way Sandwiched Slabs

    OpenAIRE

    Pachpande, Jivan Vilas

    2015-01-01

    This dissertation presents the details of the findings of a study focused on evaluating the structural behavior of three-dimensional (3D) cementitious sandwich panels with Expanded Polystyrene (EPS) foam core for two-way slab applications. In this study, both theoretical and finite element numerical analysis procedures were adopted to predict the performance of such slabs under out-of-plane loading conditions. The results from theoretical and finite element analysis were verified by compariso...

  13. Graphene Sandwiched Mesostructured Li-Ion Battery Electrodes.

    Science.gov (United States)

    Liu, Jinyun; Zheng, Qiye; Goodman, Matthew D; Zhu, Haoyue; Kim, Jinwoo; Krueger, Neil A; Ning, Hailong; Huang, Xingjiu; Liu, Jinhuai; Terrones, Mauricio; Braun, Paul V

    2016-09-01

    A deterministic graphene-sandwiched Li-ion battery electrode consisting of an integrated 3D mesostructure of electrochemically active materials and graphene is presented. As demonstrations, electrodes with active nanomaterials that coat (V2 O5 @graphene@V2 O5 cathode) or are coated by (graphene@Si@graphene anode) graphene are fabricated. These electrodes exhibit high capacities and ultralong cycle lives (the cathode can be cycled over 2000 times with minimal capacity fade).

  14. Double Rosensweig instability in a ferrofluid sandwich structure

    OpenAIRE

    Rannacher, Dirk; Engel, Andreas

    2003-01-01

    We consider a horizontal ferrofluid layer sandwiched between two layers of immiscible non-magnetic fluids. In a sufficiently strong vertical magnetic field the flat interfaces between magnetic and non-magnetic fluids become unstable to the formation of peaks. We theoretically investigate the interplay between these two instabilities for different combinations of the parameters of the fluids and analyze the evolving interfacial patterns. We also estimate the critical magnetic field strength at...

  15. Two-dimensional analysis of shallow sandwich panels

    DEFF Research Database (Denmark)

    Skvortsov, V; Bozhevolnaya, Elena

    2001-01-01

    The shallow singly curved and rectangular in-plane sandwich panels affected by lateral loads are considered. The set of governing equations on the basis of the Timoshenko-Reissner plate theory is derived for these panels in the case of general boundary conditions. Usage of any real boundary condi...... all four edges and for the panel that is simply supported along its curved boundaries and has hinge-like supports along the straight boundaries. (C) 2001 Elsevier Science Ltd. All rights reserved....

  16. A sandwich ELISA to detect VHSV and IPNV in turbot

    OpenAIRE

    Vázquez-Brañas, M. (Manuel); Coll-Morales, J. (Julio); Estepa, A

    1994-01-01

    Abstract: The recent demonstration that reared turbot (Scophthalmus maximus L) is a natural host for salmonid rhabdoviruses has made their rapid detection relevant to these fish species. A unique protocol to select and use non-competitive monoclonal antibodies (Mabs) for two high-sensitivity sandwich ELISAs has been developed to detect both infectious pancreatic necrosis virus (IPNV) and viral haemorrhagic septicaemia virus (VHSV) in turbot kidney extracts to assess the possibility of using t...

  17. Residual Strength of In-plane Loaded Debonded Sandwich Panels

    DEFF Research Database (Denmark)

    Berggreen, Carl Christian; Simonsen, Bo Cerup

    2005-01-01

    This paper presents a FEM based numerical model for prediction of residual strength of damaged sandwich panels. As demonstrated, the model can predict the maximum load carrying capacity of real-life panels with debond damages, where the failure is governed by face-sheet buckling followed by debond...... growth. Comparison of the theoretical predictions is carried out against a series of largescale experiments described in Lundsgaard-Larsen et al. (2005)...

  18. Sandwich Structured Composites for Aeronautics: Methods of Manufacturing Affecting Some Mechanical Properties

    Directory of Open Access Journals (Sweden)

    Aneta Krzyżak

    2016-01-01

    Full Text Available Sandwich panels are composites which consist of two thin laminate outer skins and lightweight (e.g., honeycomb thick core structure. Owing to the core structure, such composites are distinguished by stiffness. Despite the thickness of the core, sandwich composites are light and have a relatively high flexural strength. These composites have a spatial structure, which affects good thermal insulator properties. Sandwich panels are used in aeronautics, road vehicles, ships, and civil engineering. The mechanical properties of these composites are directly dependent on the properties of sandwich components and method of manufacturing. The paper presents some aspects of technology and its influence on mechanical properties of sandwich structure polymer composites. The sandwiches described in the paper were made by three different methods: hand lay-up, press method, and autoclave use. The samples of sandwiches were tested for failure caused by impact load. Sandwiches prepared in the same way were used for structural analysis of adhesive layer between panels and core. The results of research showed that the method of manufacturing, more precisely the pressure while forming sandwich panels, influences some mechanical properties of sandwich structured polymer composites such as flexural strength, impact strength, and compressive strength.

  19. Impact properties of aluminium - glass fiber reinforced plastics sandwich panels

    Directory of Open Access Journals (Sweden)

    Mathivanan Periasamy

    2012-06-01

    Full Text Available Aluminium - glass fiber reinforced plastics (GFRP sandwich panels are hybrid laminates consisting of GFRP bonded with thin aluminum sheets on either side. Such sandwich materials are increasingly used in airplane and automobile structures. Laminates with varying aluminium thickness fractions, fiber volume fractions and orientation in the layers of GFRP were fabricated by hand lay up method and evaluated for their impact performance by conducting drop weight tests under low velocity impacts. The impact energy required for initiating a crack in the outer aluminium layer as well as the energy required for perforation was recorded. The impact load-time history was also recorded to understand the failure behavior. The damage depth and the damage area were measured to evaluate the impact resistance. Optical photography and scanning electron micrographs were taken to visualize the crack and the damage zone. The bidirectional cross-ply hybrid laminate (CPHL has been found to exhibit better impact performance and damage resistance than the unidirectional hybrid laminate (UDHL. Increase in aluminium thickness fraction (Al tf and fiber volume fraction (Vf resulted in an increase in the impact energy required for cracking and perforation. On an overall basis, the sandwich panels exhibited better impact performance than the monolithic aluminium.

  20. Static and Fatigue Characterization of Nomex Honeycomb Sandwich Panels

    Directory of Open Access Journals (Sweden)

    Keskes Boualem

    2013-07-01

    Full Text Available The main benefits of using the sandwich concept in structural components are the high stiffness, good fatigue resistance and low weight ratios. Recent advances in materials and construction techniques have resulted in further improvement and increased uniformity of the sandwich composite properties. In order to use these materials in different applications, the knowledge of simply their static properties alone is not sufficient but additional information on their fatigue properties and durability are required. In this paper, first static and fatigue tests on four points bending of nomex honeycomb composite sandwich panels have been performed. Load/displacement and S-N fatigue curves are presented and analysed. Fatigue failure and damage modes are observed with an optical microscope and are discussed. The second is to address such fatigue behaviour by using a damage model and check it by experimentation. This fatigue damage model is based on stiffness degradation, which is used as a damage indicator. Two non-linear cumulative damage models derived from the chosen stiffness degradation equation are examined with assumption of linear Miner's damage summation. Predicted results are compared with available experimental data.

  1. Structural modeling of sandwich structures with lightweight cellular cores

    Science.gov (United States)

    Liu, T.; Deng, Z. C.; Lu, T. J.

    2007-10-01

    An effective single layered finite element (FE) computational model is proposed to predict the structural behavior of lightweight sandwich panels having two dimensional (2D) prismatic or three dimensional (3D) truss cores. Three different types of cellular core topology are considered: pyramidal truss core (3D), Kagome truss core (3D) and corrugated core (2D), representing three kinds of material anisotropy: orthotropic, monoclinic and general anisotropic. A homogenization technique is developed to obtain the homogenized macroscopic stiffness properties of the cellular core. In comparison with the results obtained by using detailed FE model, the single layered computational model can give acceptable predictions for both the static and dynamic behaviors of orthotropic truss core sandwich panels. However, for non-orthotropic 3D truss cores, the predictions are not so well. For both static and dynamic behaviors of a 2D corrugated core sandwich panel, the predictions derived by the single layered computational model is generally acceptable when the size of the unit cell varies within a certain range, with the predictions for moderately strong or strong corrugated cores more accurate than those for weak cores.

  2. Size Effects in Impact Damage of Composite Sandwich Panels

    Science.gov (United States)

    Dobyns, Alan; Jackson, Wade

    2003-01-01

    Panel size has a large effect on the impact response and resultant damage level of honeycomb sandwich panels. It has been observed during impact testing that panels of the same design but different panel sizes will show large differences in damage when impacted with the same impact energy. To study this effect, a test program was conducted with instrumented impact testing of three different sizes of sandwich panels to obtain data on panel response and residual damage. In concert with the test program. a closed form analysis method was developed that incorporates the effects of damage on the impact response. This analysis method will predict both the impact response and the residual damage of a simply-supported sandwich panel impacted at any position on the panel. The damage is incorporated by the use of an experimental load-indentation curve obtained for the face-sheet/honeycomb and indentor combination under study. This curve inherently includes the damage response and can be obtained quasi-statically from a rigidly-backed specimen or a specimen with any support conditions. Good correlation has been obtained between the test data and the analysis results for the maximum force and residual indentation. The predictions can be improved by using a dynamic indentation curve. Analyses have also been done using the MSC/DYTRAN finite element code.

  3. Microtomography with a sandwich detector for mouse bone imaging

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seung Ho; Kim, Junwoo; Kim, Ho Kyung [Pusan National University, Busan (Korea, Republic of); Youn, Hanbean; Jeon, Hosang [Pusan National University Yangsan Hospital, Yangsan (Korea, Republic of)

    2015-10-15

    Single-shot dual-energy imaging, using sandwich detector, the rear detector usually uses a thicker x-ray converter to enhance quantum efficiency with the higher-energy spectrum, hence providing a blurrier image than the front detector. The weighted logarithmic subtraction of the two images therefore results in a form of unsharp masking that enhances edges in the resultant image. Inspired by this observation, we have developed a micro computed tomography (micro-CT) system with the sandwich detector for high-resolution bone imaging of small animals. The sandwich detector consists of two flat-panel detectors by stacking one upon the other. Although the x-ray beam continuously irradiates, the step-rotation of an object and stay-readout of projection data were considered for the scanning and data gathering. It will be necessary that more elaborate experiments with the mouse and/or other quantitative phantoms. And quantification of the image quality of bone-enhanced images in comparisons with the conventional images will be performed. The image analysis of differences between bone-enhanced images obtained from the projection- and image-based approaches can be performed.

  4. Static and Fatigue Characterization of Nomex Honeycomb Sandwich Panels

    Directory of Open Access Journals (Sweden)

    Keskes Boualem

    2013-07-01

    Full Text Available The main benefits of using the sandwich concept in structural components are the high stiffness, good fatigue resistance and low weight ratios. Recent advances in materials and construction techniques have resulted in further improvement and increased uniformity of the sandwich composite properties. In order to use these materials in different applications, the knowledge of simply their static properties alone is not sufficient but additional information on their fatigue properties and durability are required. In this paper, first static and fatigue tests on four points bending of nomex honeycomb composite sandwich panels have been performed. Load/displacement and S-N fatigue curves are presented and analysed. Fatigue failure and damage modes are observed with an optical microscope and are discussed. The second is to address such fatigue behaviour by using a damage model and check it by experimentation. This fatigue damage model is based on stiffness degradation, which is used as a damage indicator. Two non-linear cumulative damage models derived from the chosen stiffness degradation equation are examined with assumption of linear Miner's damage summation. Predicted results are compared with available experimental data.

  5. Structural modeling of sandwich structures with lightweight cellular cores

    Institute of Scientific and Technical Information of China (English)

    T. Liu; Z. C. Deng; T. J. Lu

    2007-01-01

    An effective single layered finite element (FE) computational model is proposed to predict the structural behavior of lightweight sandwich panels having two dimensional (2D) prismatic or three dimensional (3D) truss cores.Three different types of cellular core topology are considered: pyramidal truss core (3D), Kagome truss core (3D) and corrugated core (2D), representing three kinds of material anisotropy: orthotropic, monoclinic and general anisotropic. A homogenization technique is developed to obtain the homogenized macroscopic stiffness properties of the cellular core. In comparison with the results obtained by using detailed FE model, the single layered computational model cangive acceptable predictions for both the static and dynamic behaviors of orthotropic truss core sandwich panels. However, for non-orthotropic 3D truss cores, the predictions are not so well. For both static and dynamic behaviors of a 2D corrugated core sandwich panel, the predictions derived by the single layered computational model is generally acceptable when the size of the unit cell varies within a certain range, with the predictions for moderately strong or strong corrugated cores more accurate than those for weak cores.

  6. Defining Documentary Film

    DEFF Research Database (Denmark)

    Juel, Henrik

    2006-01-01

    A discussion of various attemts at defining documentary film regarding form, content, truth, stile, genre or reception - and a propoposal of a positive list of essential, but non-exclusive characteristica of documentary film......A discussion of various attemts at defining documentary film regarding form, content, truth, stile, genre or reception - and a propoposal of a positive list of essential, but non-exclusive characteristica of documentary film...

  7. Definably amenable NIP groups

    OpenAIRE

    Chernikov, Artem; Simon, Pierre

    2015-01-01

    We study definably amenable NIP groups. We develop a theory of generics, showing that various definitions considered previously coincide, and study invariant measures. Applications include: characterization of regular ergodic measures, a proof of the conjecture of Petrykowski connecting existence of bounded orbits with definable amenability in the NIP case, and the Ellis group conjecture of Newelski and Pillay connecting the model-theoretic connected component of an NIP group with the ideal s...

  8. Theoretical prediction of the damping of a railway wheel with sandwich-type dampers

    Science.gov (United States)

    Merideno, Inaki; Nieto, Javier; Gil-Negrete, Nere; Giménez Ortiz, José Germán; Landaberea, Aitor; Iartza, Jon

    2014-09-01

    This paper presents a procedure for predicting the damping added to a railway wheel when sandwich-type dampers are installed. Although there are different ways to reduce the noise generated by a railway wheel, most devices are based on the mechanism of increasing wheel damping. This is why modal damping ratios are a clear indicator of the efficiency of the damping device and essential when a vibro-acoustic study of a railway wheel is carried out. Based on a number of output variables extracted from the wheel and damper models, the strategy explained herein provides the final damping ratios of the damped wheel. Several different configurations are designed and experimentally tested. Theoretical and experimental results agree adequately, and it is demonstrated that this procedure is a good tool for qualitative comparison between different solutions in the design stages.

  9. Fractal Patterns of Fracture in Sandwich Composite Materials under Biaxial Tension

    Institute of Scientific and Technical Information of China (English)

    JingFANG; XuefengYAO; 等

    1996-01-01

    The paper presents a successful experiment to generate a fractal pattern of branching cracks in a brittle material sandwiched in ductile pates.A glass sheet bonded between two polycarbonate plates was heated at different levels of temperatures and the stress field due to the difference of thermal coefficients of the materials was solved by combining the results from isochromatic fringes and thermal stress analysis.At a critical degree of temperature,a crack was initiated at a point and soon produced crack branches to release the stored energy.A tree-like fractal patterns of the branch cracks was then developed with the growth of the branches that subsequently produced more branches on their ways of propagation.The fractakl dimension of the fracture pattern was evaluated and the mechanism of the fragmentation was analyzed with the help of the residual stress field of isochromatic and isoclinic patterns.

  10. Modelling the behaviour of composite sandwich structures when subject to air-blast loading

    Directory of Open Access Journals (Sweden)

    H Arora

    2016-09-01

    Full Text Available Large-scale glass fibre reinforced polymer (GFRP and carbon fibre reinforced polymer (CFRP sandwich structures (1.6 m x 1.3 m were subject to explosive air blast (100 kg TNT equivalent at stand-off distances of 14 m. Digital image correlation (DIC was used to obtain full-field data for the rear-face of each deforming target. A steel plate of comparable mass per unit area was also subjected to the same blast conditions for comparison. The experimental data was then verified with finite element models generated in Abaqus/Explicit. Close agreement was obtained between the numerical and experimental results, confirming that the CFRP panels had a superior blast performance to the GFRP panels. Moreover all composite targets sustained localised failures (that were more severe in the GFRP targets but retained their original shape post blast. The rear-skins remained intact for each composite target with core shear failure present.

  11. An h-p Finite Element Vibration Analysis of Open Conical Sandwich Panels and Conical Sandwich Frusta

    Science.gov (United States)

    BARDELL, N. S.; LANGLEY, R. S.; DUNSDON, J. M.; AGLIETTI, G. S.

    1999-09-01

    The vibration study of a general three-layer conical sandwich panel based on theh -p version of the finite element method is presented in this paper. No restriction is placed on the degree of curvature of the shell, thereby relaxing the strictures associated with shallow shell theory. The methodology incorporates a new set of trigonometric functions to provide the element p -enrichment, and elements may be joined together to model either open conical panels, or complete conical frusta (circumferentially connected, but open at each end). The full range of classical boundary conditions, which includes free, clamped, simply supported and shear diaphragm edges, may be applied in any combination to open and closed panels, thereby facilitating the study of a wide range of conical sandwich shells. The convergence properties of this element have been established for different combinations of the h - and p -parameters, thereby assuring its integrity for more general use. Since very little work has been reported on the vibration characteristic of either circumferentially closed or open conical sandwich panels, the main thrust of this work has been to present and validate an efficient modelling technique, rather than to perform numerous parameter and/or sensitivity studies. To this end, some new results are presented and subsequently validated using a commercially available finite element package. It is shown that for results of comparable accuracy, models constructed using the h-p formulation require significantly fewer degrees of freedom than those assembled using the commercial package. Some preliminary experimental results are also included for completeness.

  12. Multiple-turnover cleavage of double-stranded DNA by sandwiched zinc-finger nuclease.

    Science.gov (United States)

    Mineta, Yusuke; Okamoto, Tomoyuki; Takenaka, Kosuke; Doi, Norio; Aoyama, Yasuhiro; Sera, Takashi

    2009-01-01

    To refine zinc-finger nuclease (ZFN) technology, we constructed a sandwiched ZFN, in which a DNA cleavage enzyme was sandwiched with two artificial zinc-finger proteins (AZPs). Because the sandwiched ZFN is designed to cleave the DNA between the two AZP-binding sites, the sandwiched ZFN is expected to bind preferentially to a DNA substrate rather than to cleavage products and thereby cleave it with multiple turnovers. To prove the concept, we sandwiched a staphylococcal nuclease (SNase), which cleaves DNA as a monomer, between two 3-finger AZPs. The AZP-sandwiched SNase cleaved large amounts of dsDNA site-specifically. Such multiple-turnover cleavage was not observed with control nucleases that possess a single AZP.

  13. Fatigue fracture of fiber reinforced polymer honeycomb composite sandwich structures for gas turbine engines

    Science.gov (United States)

    Nikhamkin, Mikhail; Sazhenkov, Nikolai; Samodurov, Danil

    2017-05-01

    Fiber reinforced polymer honeycomb composite sandwich structures are commonly used in different industries. In particular, they are used in the manufacture of gas turbine engines. However, fiber reinforced polymer honeycomb composite sandwich structures often have a manufacturing flaw. In theory, such flaws due to their rapid propagation reduce the durability of fiber reinforced polymer honeycomb composite sandwich structures. In this paper, bending fatigue tests of fiber reinforced polymer honeycomb composite sandwich structures with manufacturing flaws were conducted. Comparative analysis of fatigue fracture of fiber reinforced polymer honeycomb composite sandwich specimens was conducted before and after their bending fatigue tests. The analysis was based on the internal damage X-ray observation of fiber reinforced polymer honeycomb composite sandwich specimens.

  14. Can play be defined?

    DEFF Research Database (Denmark)

    Eichberg, Henning

    2015-01-01

    Can play be defined? There is reason to raise critical questions about the established academic demand that at phenomenon – also in humanist studies – should first of all be defined, i.e. de-lineated and by neat lines limited to a “little box” that can be handled. The following chapter develops t....... Human beings can very well understand play – or whatever phenomenon in human life – without defining it........ The academic imperative of definition seems to be linked to the positivistic attempts – and produces sometimes monstrous definitions. Have they any philosophical value for our knowledge of what play is? Definition is not a universal instrument of knowledge-building, but a culturally specific construction...

  15. Nouns to Define Homophobia

    Directory of Open Access Journals (Sweden)

    Adalberto Campo Arias

    2013-09-01

    Full Text Available Background. The term ‘homophobia’ was introduced in the academic context more than 40 years ago. However, its meaning has changed over time. Objective. To review the nouns used in the last twelve years to define homophobia. Methodology. The authors conducted a systematic search in Medline through Pubmed that included editorials, letters to editors, comments and narrative reviews, in English and Spanish. A qualitative analysis (Grounded theory was applied to analyze nouns used to define homophobia since 2001 through 2012. Results. Authors reviewed three papers including ten nouns to define homophobia, the most common noun was fear. The terms were grouped into two domains: negative attitude and discomfort with homosexuality. Conclusion. Fear is the most used word to describe homophobia. The terms were grouped into two domains: negative attitude and discomfort toward homosexuality.

  16. Defining "intermittent UVR exposure"

    DEFF Research Database (Denmark)

    Bodekær, Mette; Philipsen, Peter Alshede; Petersen, Bibi Øager;

    2016-01-01

    to define and quantify “intermittent UVR exposure” by an objective measure. Methods: A broad study population of adults and children had data collected during a summer period. Data were personal UVR dosimetry measurements, from which the number of “intermittent days” was derived, sun behaviour diaries.......001). The corresponding numbers for prediction of nevi and lentigo density by retrospective questionnaire data was lower (R2 = 0.11, R2 = 0.26, p defined objective measure of intermittent UVR exposure. This measure may provide a better prediction of solar skin damage and CMM...

  17. Experimental investigation on vibration characteristics of sandwich beams with magnetorheological elastomers cores

    Institute of Scientific and Technical Information of China (English)

    魏克湘; 孟光; 张文明; 朱石沙

    2008-01-01

    A sandwich beam specimen was fabricated by treating with MR elastomers between two thin aluminum face-plates.Experiment was carried out to investigate the vibration responses of the sandwich beam with respect to the intensity of the magnetic field and excitation frequencies.The results show that the sandwich beams with MR elastomers cores have the capabilities of shifting natural frequencies and the vibration amplitudes decrease with the variation of the intensity of external magnetic field.

  18. Effects of Subzero Temperatures and Sea Water Immersion on Damage Initiation and Growth in Sandwich Composites

    Science.gov (United States)

    2008-12-10

    single cantilever beam sandwich test. The TSD is perhaps 19 An improved methodology for measuring the interracial toughness of sandwich beams 3...measuring the interracial toughness of sandwich beams 5 Table 4.1. Material properties Glass face Glass face Carbon „ , ,, Loading L...which shows the relationship between reaction forces for an MSCB specimen with 12 ply glass face sheets at different crack lengths. It is observed

  19. 1. Mono([8]annulene)Uranium(4) half-sandwich complexes, 2. Novel syntheses of symmetrically substituted cyclooctatetetraenes

    Energy Technology Data Exchange (ETDEWEB)

    Boussie, T.R.

    1991-10-01

    A reproducible, high-yield synthesis of mono([8]annulene)uranium(4)dichloride (1) is reported, along with the X-ray crystal structural of the bis(pyridine) adduct. Metathesis reactions of the half-sandwich complex 1 with a variety of simple alkyl and alkoxy reagents failed to generate any isolable mono-ring complexes. Reactions of 1 with polydentate, delocalized anions did produce stable derivatives, including mono([8]annulene)uranium(4)bis(acetylacetonate) (4). An X-ray crystal structure of 4 is reported.

  20. 1. Mono((8)annulene)Uranium(4) half-sandwich complexes, 2. Novel syntheses of symmetrically substituted cyclooctatetetraenes

    Energy Technology Data Exchange (ETDEWEB)

    Boussie, T.R.

    1991-10-01

    A reproducible, high-yield synthesis of mono((8)annulene)uranium(4)dichloride (1) is reported, along with the X-ray crystal structural of the bis(pyridine) adduct. Metathesis reactions of the half-sandwich complex 1 with a variety of simple alkyl and alkoxy reagents failed to generate any isolable mono-ring complexes. Reactions of 1 with polydentate, delocalized anions did produce stable derivatives, including mono((8)annulene)uranium(4)bis(acetylacetonate) (4). An X-ray crystal structure of 4 is reported.

  1. Fabrication and Testing of Carbon Fiber Reinforced Truss Core Sandwich Panels

    Institute of Scientific and Technical Information of China (English)

    Bing Wang; Linzhi Wu; Li Ma; Qiang Wang; Shanyi Du

    2009-01-01

    Truss core sandwich panels reinforced by carbon fibers were assembled with bonded laminate facesheets and carbon fiber reinforced truss cores. The top and bottom facesheets were interconnected with truss cores. Both ends of the truss cores were embedded into four layers of top and bottom facesheets. The mechanical properties of truss core sandwich panels were then investigated under out-of-plane and in-plane compression loadings to reveal the failure mechanisms of sandwich panels. Experimental results indicated that the mechanical behavior of sandwich structure under in-plane loading is dominated by the buckling and debonding of facesheets.

  2. Fiber-Reinforced-Foam (FRF) Core Composite Sandwich Panel Concept for Advanced Composites Technologi

    Science.gov (United States)

    2010-01-01

    Fiber-Reinforced-Foam (FRF) Core Composite Sandwich Panel Concept for Advanced Composites Technologies Project - Preliminary Manufacturing Demonstration Articles for Ares V Payload Shroud Barrel Acreage Structure

  3. Giant magnetoresistance effect in Ni buffered Co/Cu/Co sandwich

    Institute of Scientific and Technical Information of China (English)

    LI; Tie(李铁)

    2002-01-01

    The effects of Ni buffer layer on the giant magnetoresistance structure of Co/Cu/Co sandwich are investigated systematically in this paper.It is found that Ni buffer layer can induce the crystallization of the lower Ni/Co layer and produce small coercivity,thus enlarging the difference in the magnetic behavior between the two magnetic layers in the sandwich.Moreover,the use of the Ni buffer layer can also improve the interface flatness in the sandwich.All these factors enhance the sensitivity of the Ni buffered sandwich.``

  4. Combined-load buckling behavior of metal-matrix composite sandwich panels under different thermal environments

    Science.gov (United States)

    Ko, William L.; Jackson, Raymond H.

    1991-01-01

    Combined compressive and shear buckling analysis was conducted on flat rectangular sandwich panels with the consideration of transverse shear effects of the core. The sandwich panel is fabricated with titanium honeycomb core and laminated metal matrix composite face sheets. The results show that the square panel has the highest combined load buckling strength, and that the buckling strength decreases sharply with the increases of both temperature and panel aspect ratio. The effect of layup (fiber orientation) on the buckling strength of the panels was studied in detail. The metal matrix composite sandwich panel was much more efficient than the sandwich panel with nonreinforced face sheets and had the same specific weight.

  5. Mechanical evaluation with fe analysis of sandwich panels for wind turbine blade

    Energy Technology Data Exchange (ETDEWEB)

    Yasaswi, M.; Naveen, P.N.E.; Prasad, R.V. [GIET. Dept. of Mechanical Engineering, Rajahmundry (India)

    2012-07-01

    Sandwich panels are notable for their structural efficiency and are used as load bearing components in various branches of engineering, especially in aerospace and marine industries. The objective of the present work is to perform computer-aided analysis on sandwich panels. The analysis of sandwich panel with truss core are compared with other four types of sandwich panel with continuous corrugated core, top hat core, zed core and channel core. The basic reason to use sandwich structure is to save weight, however smooth skins and excellent fatigue resistance are also attributes of a sandwich structure. A sandwich is comprised of two layered composite materials formed by bonding two or more thin facings or face sheets to relatively thick core materials. In this type of construction the facings resist nearly all of the in-plane loads and out-of-plane bending moments. The thin facings provide nearly all of the bending stiffness because they are generally of a much higher modulus material is located at a greatest distance from the neutral axis of the component. The basic concept of sandwich panel is that the facings carry the bending loads and the core carries the shear loads. The main function of the core material is to distribute local loads and stresses over large areas. From all this analysis it is concluded that the truss core Sandwich panels can be used in wind turbine blade design. (Author)

  6. On Defining Mass

    Science.gov (United States)

    Hecht, Eugene

    2011-01-01

    Though central to any pedagogical development of physics, the concept of mass is still not well understood. Properly defining mass has proven to be far more daunting than contemporary textbooks would have us believe. And yet today the origin of mass is one of the most aggressively pursued areas of research in all of physics. Much of the excitement…

  7. Defining Data Science

    OpenAIRE

    Zhu, Yangyong; Xiong, Yun

    2015-01-01

    Data science is gaining more and more and widespread attention, but no consensus viewpoint on what data science is has emerged. As a new science, its objects of study and scientific issues should not be covered by established sciences. Data in cyberspace have formed what we call datanature. In the present paper, data science is defined as the science of exploring datanature.

  8. Defining Mathematical Giftedness

    Science.gov (United States)

    Parish, Linda

    2014-01-01

    This theoretical paper outlines the process of defining "mathematical giftedness" for a present study on how primary school teaching shapes the mindsets of children who are mathematically gifted. Mathematical giftedness is not a badge of honour or some special value attributed to a child who has achieved something exceptional.…

  9. Software Defined Networking

    DEFF Research Database (Denmark)

    Caba, Cosmin Marius

    resources are limited. Hence, to counteract this trend, current QoS mechanisms must become simpler to deploy and operate, in order to motivate NSPs to employ QoS techniques instead of overprovisioning. Software Defined Networking (SDN) represents a paradigm shift in the way telecommunication and data...

  10. Defining Effective Teaching

    Science.gov (United States)

    Layne, L.

    2012-01-01

    The author looks at the meaning of specific terminology commonly used in student surveys: "effective teaching." The research seeks to determine if there is a difference in how "effective teaching" is defined by those taking student surveys and those interpreting the results. To investigate this difference, a sample group of professors and students…

  11. Defining Game Mechanics

    DEFF Research Database (Denmark)

    Sicart (Vila), Miguel Angel

    2008-01-01

    This article defins game mechanics in relation to rules and challenges. Game mechanics are methods invoked by agents for interacting with the game world. I apply this definition to a comparative analysis of the games Rez, Every Extend Extra and Shadow of the Colossus that will show the relevance...... of a formal definition of game mechanics. Udgivelsesdato: Dec 2008...

  12. Software Defined Cyberinfrastructure

    Energy Technology Data Exchange (ETDEWEB)

    Foster, Ian; Blaiszik, Ben; Chard, Kyle; Chard, Ryan

    2017-07-17

    Within and across thousands of science labs, researchers and students struggle to manage data produced in experiments, simulations, and analyses. Largely manual research data lifecycle management processes mean that much time is wasted, research results are often irreproducible, and data sharing and reuse remain rare. In response, we propose a new approach to data lifecycle management in which researchers are empowered to define the actions to be performed at individual storage systems when data are created or modified: actions such as analysis, transformation, copying, and publication. We term this approach software-defined cyberinfrastructure because users can implement powerful data management policies by deploying rules to local storage systems, much as software-defined networking allows users to configure networks by deploying rules to switches.We argue that this approach can enable a new class of responsive distributed storage infrastructure that will accelerate research innovation by allowing any researcher to associate data workflows with data sources, whether local or remote, for such purposes as data ingest, characterization, indexing, and sharing. We report on early experiments with this approach in the context of experimental science, in which a simple if-trigger-then-action (IFTA) notation is used to define rules.

  13. Defining in Classroom Activities.

    Science.gov (United States)

    Mariotti, Maria Alessandra; Fischbein, Efraim

    1997-01-01

    Discusses some aspects of the defining process in geometrical context in the reference frame of the theory of "figural concepts." Presents analysis of some examples taken from a teaching experiment at the sixth-grade level. Contains 30 references. (Author/ASK)

  14. Defining Game Mechanics

    DEFF Research Database (Denmark)

    Sicart (Vila), Miguel Angel

    2008-01-01

    This article defins game mechanics in relation to rules and challenges. Game mechanics are methods invoked by agents for interacting with the game world. I apply this definition to a comparative analysis of the games Rez, Every Extend Extra and Shadow of the Colossus that will show the relevance...... of a formal definition of game mechanics. Udgivelsesdato: Dec 2008...

  15. Defining the fascial system.

    Science.gov (United States)

    Adstrum, Sue; Hedley, Gil; Schleip, Robert; Stecco, Carla; Yucesoy, Can A

    2017-01-01

    Fascia is a widely used yet indistinctly defined anatomical term that is concurrently applied to the description of soft collagenous connective tissue, distinct sections of membranous tissue, and a body pervading soft connective tissue system. Inconsistent use of this term is causing concern due to its potential to confuse technical communication about fascia in global, multiple discipline- and multiple profession-spanning discourse environments. The Fascia Research Society acted to address this issue by establishing a Fascia Nomenclature Committee (FNC) whose purpose was to clarify the terminology relating to fascia. This committee has since developed and defined the terms a fascia, and, more recently, the fascial system. This article reports on the FNC's proposed definition of the fascial system. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Defining Legal Moralism

    DEFF Research Database (Denmark)

    Thaysen, Jens Damgaard

    2015-01-01

    This paper discusses how legal moralism should be defined. It is argued that legal moralism should be defined as the position that “For any X, it is always a pro tanto reason for justifiably imposing legal regulation on X that X is morally wrong (where “morally wrong” is not conceptually equivalent...... to “harmful”)”. Furthermore, a distinction between six types of legal moralism is made. The six types are grouped according to whether they are concerned with the enforcement of positive or critical morality, and whether they are concerned with criminalising, legally restricting, or refraining from legally...... protecting morally wrong behaviour. This is interesting because not all types of legal moralism are equally vulnerable to the different critiques of legal moralism that have been put forth. Indeed, I show that some interesting types of legal moralism have not been criticised at all....

  17. Define Digital Vernacular

    Institute of Scientific and Technical Information of China (English)

    刘佳; 李海英; James Stevens; Rough Nelson

    2014-01-01

    As science and technology developed, the tools of humans developed from humans’hands, to mechanical and digital technologies. The tools influ-ence almost everything in the humans’world, so does vernacular. The digital vernacular could be understood as using digital technology to vernacular; the digital means technologies. It also could be understood as doing vernacular in a digital way;the digital means data and information, in other words it can be seeking truth from facts. Define digital vernacular is not only what is digital vernacular, but also about how to do the digital vernacular and what kind of attitude we should hold to-ward the digital vernacular. Define digital vernacular as both thinking and doing.

  18. Defining local food

    DEFF Research Database (Denmark)

    Eriksen, Safania Normann

    2013-01-01

    Despite evolving local food research, there is no consistent definition of “local food.” Various understandings are utilized, which have resulted in a diverse landscape of meaning. The main purpose of this paper is to examine how researchers within the local food systems literature define local...... food, and how these definitions can be used as a starting point to identify a new taxonomy of local food based on three domains of proximity....

  19. [To define internet addiction].

    Science.gov (United States)

    Tonioni, Federico

    2013-01-01

    Internet addiction is a new behavioral disorder difficult to define, especially when referring to young teenagers who make great use of web-mediated relationships. It's necessary to separate the cases of overt dependency on those in which the abuse of internet seems to have a different value, offering the only way to achieve the possible relationship. Internet is mediating a new way of communicating and thinking, this may favor the onset of clinical phenomena intended to surprise.

  20. Current rectification in nickelocenylferrocene sandwiched between two gold electrodes.

    Science.gov (United States)

    Matsuura, Yukihito

    2013-01-07

    I present a theoretical study of the electronic transport properties of nickelocenylferrocene sandwiched between gold electrodes. Compared with the biferrocene system, the nickelocenylferrocene system had high electrical conduction and rectification in the bias range -1 to 1 V. Furthermore, the spin-down states of the nickelocenylferrocene system exhibited perfect spin-filtering properties. From the electronic states of the nickelocenylferrocene, it was found that the rectification was caused by a difference in the bias-dependent behaviors between the Fe 3d and Ni 3d orbitals.

  1. A Conformal Thin-Sandwich Solver for Generic Initial Data

    CERN Document Server

    East, William E; Pretorius, Frans

    2012-01-01

    We present a new scheme for constructing initial data for the Einstein field equations using the conformal thin-sandwich formulation that does not assume conformal flatness or approximate Killing vectors. This includes a method for determining free data based on superposition, as well as a way to handle black hole singularities without excision. We numerically solve the constraint equations using a multigrid algorithm with mesh refinement. We demonstrate the efficacy of the method with initial data solutions for several applications: a quasi-circular binary black hole merger, a dynamical capture black hole-neutron star merger, and an ultrarelativistic collision.

  2. Standard Test Method for Dimensional Stability of Sandwich Core Materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2002-01-01

    1.1 This test method covers the determination of the sandwich core dimensional stability in the two plan dimensions. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given may be approximate. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  3. Standard Test Method for Shear Fatigue of Sandwich Core Materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2000-01-01

    1.1 This test method covers determination of the effect of repeated shear loads on sandwich core materials. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given may be approximate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  4. Hydrogen storage property of sandwiched magnesium hydride nanoparticle thin film

    Energy Technology Data Exchange (ETDEWEB)

    Barcelo, Steven; Rogers, Matthew; Grigoropoulos, Costas P.; Mao, Samuel S. [Lawrence Berkeley National Laboratory and Department of Mechanical Engineering, University of California at Berkeley, Berkeley, CA 94720 (United States)

    2010-07-15

    Hydrogen sorption property of magnesium (Mg) in the form of sandwiched Pd/Mg/Pd films is investigated. Pulsed laser deposition method was applied to deposit the samples consisting of films of nanoparticles. The enthalpy of formation of MgH{sub 2} was found to be -68 kJ/mol H{sub 2} for films with nanoparticle size on the order of 50 nm, which is smaller than the value for bulk MgH{sub 2} and may be explained by the concept of excess volume. (author)

  5. Optimization of the curing process of a sandwich panel

    Science.gov (United States)

    Phyo Maung, Pyi; Tatarnikov, O.; Malysheva, G.

    2016-10-01

    This study presented finite element modelling and experimental measurements of temperatures during the autoclave curing of the T-50 aircraft wing sandwich panel. This panel consists of upper and lower carbon fibre based laminates and an aluminium foil honeycomb. The finite element modelling was performed using the Femap-Nastran product. During processing, the temperature at various points on the surface of the panel was measured using the thermocouples. The finite element method simulated the thermal conditions and determined the temperatures in the different parts of the panel for a full cycle of the curing process. A comparison of the calculated and experimental data shows that their difference does not exceed 6%.

  6. Experimental Investigations of Compressed Sandwich Composite/Honeycomb Cylindrical Shells

    Science.gov (United States)

    Muc, A.; Stawiarski, A.; Romanowicz, P.

    2017-06-01

    This article explains in some details the behaviour of thick, deep cylindrical sandwich panels subjected to compressive loads. In general, experimental results indicated that two different forms of failure have been observed - the first corresponds to the overall buckling and the second to the facesheet wrinkling. The obtained experimentally damages of shells are verified and validated with the use of the FE analysis, 2-D and 3-D both in the linear and non-linear approach. The unidirectional strain gauges were applied to detect the initiation of the overall buckling mode.

  7. FINITE ELEMENT MODELING OF THIN CIRCULAR SANDWICH PLATES DEFLECTION

    Directory of Open Access Journals (Sweden)

    K. S. Kurachka

    2014-01-01

    Full Text Available A mathematical model of a thin circular sandwich plate being under the vertical load is proposed. The model employs the finite element method and takes advantage of an axisymmetric finite element that leads to the small dimension of the resulting stiffness matrix and sufficient accuracy for practical calculations. The analytical expressions for computing local stiffness matrices are found, which can significantly speed up the process of forming the global stiffness matrix and increase the accuracy of calculations. A software is under development and verification. The discrepancy between the results of the mathematical model and those of analytical formulas for homogeneous thin circularsandwich plates does not exceed 7%.

  8. Sandwich Hologram Interferometry For Determination Of Sacroiliac Joint Movements

    Science.gov (United States)

    Vukicevic, S.; Vinter, I.; Vukicevic, D.

    1983-12-01

    Investigations were carried out on embalmed and fresh specimens of human pelvisis with preserved lumbar spines, hip joints and all the ligaments. Specimens were tested under static vertical loading by pulsed laser interferometry. The deformations and behaviour of particular pelvic parts were interpreted by providing computer interferogram models. Results indicate rotation and tilting of the sacrum in the dorso-ventral direction and small but significant movements in the cranio-caudal direction. Sandwich holography proved to be the only applicable method when there is a combination of translation and tilt in the range of 200 μm to 1.5 mm.

  9. Optical and thermophysical parameters measurement using sandwich photodetectors

    Science.gov (United States)

    Turinov, Valery I.

    1993-12-01

    A method is reported for estimating thermophysical and optical parameters, in which a two- spectral band sandwich photodetector is used. The sensitivity ranges of such a sensor are 2 - 5 micrometers and 8 - 14 micrometers . On irradiating an object's surface by a short radiation pulse the photodetector collected signals U1, U2 and the rates of their changes (dU1/dt), (dU2/dt) are recorded. These pertain to the same area on the object's surface and belong to the two spectral ranges mentioned. The parameters of the object are evaluated by means of calculations with the values measured.

  10. Decidability of definability

    CERN Document Server

    Tsankov, Manuel Bodirsky; Michael Pinsker; Todor

    2010-01-01

    For a fixed infinite structure $\\Gamma$ with finite signature $\\tau$, we study the following computational problem: Input are quantifier-free first-order $\\tau$-formulas $\\phi_0,\\phi_1,\\dots,\\phi_n$ that define relations $R_0,R_1,\\dots,R_n$ over $\\Gamma$. The question is whether the relation $R_0$ is primitive positive definable from $R_1,\\ldots,R_n$, i.e., definable by a first-order formula that uses only relation symbols for $R_1, \\dots, R_n$, equality, conjunctions, and existential quantification (disjunction, negation, and universal quantification are forbidden). We show decidability of this problem for all structures $\\Gamma$ that have a first-order definition in an ordered homogeneous structure $\\Delta$ with a finite language whose age is a Ramsey class and determined by finitely many forbidden substructures. Examples for structures $\\Gamma$ with this property are the order of the rationals, the random graph, the homogeneous universal poset, the random tournament, all homogeneous universal $C$-relations...

  11. Defining Z in Q

    CERN Document Server

    Koenigsmann, Jochen

    2010-01-01

    We show that ${\\mathbb Z}$ is definable in ${\\mathbb Q}$ by a universal first-order formula in the language of rings. We also present an $\\forall\\exists$-formula for ${\\mathbb Z}$ in ${\\mathbb Q}$ with just one universal quantifier. We exhibit new diophantine subsets of ${\\mathbb Q}$ like the set of non-squares or the complement of the image of the norm map under a quadratic extension. Finally, we show that there is no existential formula for ${\\mathbb Z}$ in ${\\mathbb Q}$, provided one assumes a strong variant of the Bombieri-Lang Conjecture for varieties over ${\\mathbb Q}$ with many ${\\mathbb Q}$-rational points.

  12. Sandwiched confinement of quantum dots in graphene matrix for efficient electron transfer and photocurrent production.

    Science.gov (United States)

    Zhu, Nan; Zheng, Kaibo; Karki, Khadga J; Abdellah, Mohamed; Zhu, Qiushi; Carlson, Stefan; Haase, Dörthe; Žídek, Karel; Ulstrup, Jens; Canton, Sophie E; Pullerits, Tõnu; Chi, Qijin

    2015-05-21

    Quantum dots (QDs) and graphene are both promising materials for the development of new-generation optoelectronic devices. Towards this end, synergic assembly of these two building blocks is a key step but remains a challenge. Here, we show a one-step strategy for organizing QDs in a graphene matrix via interfacial self-assembly, leading to the formation of sandwiched hybrid QD-graphene nanofilms. We have explored structural features, electron transfer kinetics and photocurrent generation capacity of such hybrid nanofilms using a wide variety of advanced techniques. Graphene nanosheets interlink QDs and significantly improve electronic coupling, resulting in fast electron transfer from photoexcited QDs to graphene with a rate constant of 1.3 × 10(9) s(-1). Efficient electron transfer dramatically enhances photocurrent generation in a liquid-junction QD-sensitized solar cell where the hybrid nanofilm acts as a photoanode. We thereby demonstrate a cost-effective method to construct large-area QD-graphene hybrid nanofilms with straightforward scale-up potential for optoelectronic applications.

  13. Sandwiched confinement of quantum dots in graphene matrix for efficient electron transfer and photocurrent production

    Science.gov (United States)

    Zhu, Nan; Zheng, Kaibo; Karki, Khadga J.; Abdellah, Mohamed; Zhu, Qiushi; Carlson, Stefan; Haase, Dörthe; Žídek, Karel; Ulstrup, Jens; Canton, Sophie E.; Pullerits, Tõnu; Chi, Qijin

    2015-05-01

    Quantum dots (QDs) and graphene are both promising materials for the development of new-generation optoelectronic devices. Towards this end, synergic assembly of these two building blocks is a key step but remains a challenge. Here, we show a one-step strategy for organizing QDs in a graphene matrix via interfacial self-assembly, leading to the formation of sandwiched hybrid QD-graphene nanofilms. We have explored structural features, electron transfer kinetics and photocurrent generation capacity of such hybrid nanofilms using a wide variety of advanced techniques. Graphene nanosheets interlink QDs and significantly improve electronic coupling, resulting in fast electron transfer from photoexcited QDs to graphene with a rate constant of 1.3 × 109 s-1. Efficient electron transfer dramatically enhances photocurrent generation in a liquid-junction QD-sensitized solar cell where the hybrid nanofilm acts as a photoanode. We thereby demonstrate a cost-effective method to construct large-area QD-graphene hybrid nanofilms with straightforward scale-up potential for optoelectronic applications.

  14. Active structural health monitoring of composite plates and sandwiches

    Directory of Open Access Journals (Sweden)

    Sadílek P.

    2013-12-01

    Full Text Available The aim of presented work is to design, assemble and test a functional system, that is able to reveal damage from impact loading. This is done by monitoring of change of spectral characteristics on a damaged structure that is caused by change of mechanical properties of material or by change of structure’s geometry. Excitation and monitoring of structures was done using piezoelectric patches. Unidirectional composite plate was tested for eigenfrequencies using chirp signal. The eigenfrequencies were compared to results from experiments with an impact hammer and consequently with results from finite element method. Same method of finding eigenfrequencies was used on a different unidirectional composite specimen. Series of impacts were performed. Spectrum of eigenfrequencies was measured on undamaged plate and then after each impact. Measurements of the plate with different level of damage were compared. Following experiments were performed on sandwich materials where more different failures may happen. Set of sandwich beams (cut out from one plate made of two outer composite layers and a foam core was investigated and subjected to several impacts. Several samples were impacted in the same manner to get comparable results. The impacts were performed with growing impact energy.

  15. A Z_m Ham Sandwich Theorem for Complex Measures

    CERN Document Server

    Simon, Steven

    2010-01-01

    A "ham sandwich" theorem is derived for n complex measures on C^n. For each integer m >= 2, a complex hyperplane H and m corresponding "1/m" sectors are found, satisfying the condition that the "rotational average" of the measures of these sectors is zero. The result can be seen as a kind of rotational equipartition of each measure by a regular "m-fan". The proof of the theorem is topological, based on a Z_m version of the Borsuk-Ulam theorem for punctured (2n - 1)-spheres in C^n. Any finite real measure on R^{2n} can be seen as a type of complex measure on C^n, so the theorem can be applied to n finite measures on R^{2n}. In the case that m = 3, this shows the existence of a regular 3-fan which trisects each of the n measures. Similarly, any pair of finite real measures on R^{2n} can be naturally identified with a complex measure on C^n, so the theorem applies to 2n finite measures on R^{2n}. This yields a rotational condition on pairs of finite measures, and the original ham sandwich theorem for R^{2n} is r...

  16. Dispersion of guided waves in composite laminates and sandwich panels

    Science.gov (United States)

    Schaal, Christoph; Mal, Ajit

    2015-03-01

    In composite structures, damages are often invisible from the surface and can grow to reach a critical size, potentially causing catastrophic failure of the entire structure. Thus safe operation of these structures requires careful monitoring of the initiation and growth of such defects. Ultrasonic methods using guided waves offer a reliable and cost-effective method for structural health monitoring in advanced structures. Guided waves allow for long monitoring ranges and are very sensitive to defects within their propagation path. In this work, the relevant properties of guided Lamb waves for damage detection in composite structures are investigated. An efficient numerical approach is used to determine their dispersion characteristics, and these results are compared to those from laboratory experiments. The experiments are based on a pitch-catch method, in which a pair of movable transducers is placed on one surface of the structure to induce and detect guided Lamb waves. The specific cases considered include an aluminum plate and an aluminum honeycomb sandwich panel with woven composite face sheets. In addition, a disbond of the interface between one of the face sheets and the honeycomb core of the sandwich panel is also considered, and the dispersion characteristics of the two resultant waveguides are determined. Good agreement between numerical and experimental dispersion results is found, and suggestions on the applicability of the pitch-catch system for structural health monitoring are made.

  17. Free Vibration and Hardening Behavior of Truss Core Sandwich Beam

    Directory of Open Access Journals (Sweden)

    J. E. Chen

    2016-01-01

    Full Text Available The dynamic characteristics of simply supported pyramidal truss core sandwich beam are investigated. The nonlinear governing equation of motion for the beam is obtained by using a Zig-Zag theory. The averaged equations of the beam with primary, subharmonic, and superharmonic resonances are derived by using the method of multiple scales and then the corresponding frequency response equations are obtained. The influences of strut radius and core height on the linear natural frequencies and hardening behaviors of the beam are studied. It is illustrated that the first-order natural frequency decreases continuously and the second-order and third-order natural frequencies initially increase and then decrease with the increase of strut radius, and the first three natural frequencies all increase with the rise of the core height. Furthermore, the results indicate that the hardening behaviors of the beam become weaker with the increase of the rise of strut radius and core height. The mechanisms of variations in hardening behavior of the sandwich beam with the three types of resonances are detailed and discussed.

  18. Modelling of Debond and Crack Propagation in Sandwich Structures Using Fracture and Damage Mechanics

    DEFF Research Database (Denmark)

    Berggreen, C.; Simonsen, Bo Cerup; Toernqvist, Rikard

    2003-01-01

    Skin-core de-bonding or core crack propagation will often be dominating mechanisms in the collapse modes of sandwich structures. This paper presents two different methods for prediction of crack propagation in a sandwich structure: a fracture mechanics approach, where a new mode-mix method...

  19. Failure Investigation of Debonded Sandwich Columns: An Experimental and Numerical Study

    DEFF Research Database (Denmark)

    Moslemian, Ramin; Berggreen, Christian; Carlsson, Leif A.

    2009-01-01

    Failure of compression loaded sandwich columns with an implanted through-width face/core debond is examined. Compression tests were conducted on sandwich columns containing implemented face/core debonds. The strains and out-of-plane displacements of the debonded region were monitored using the di...

  20. Research overview of design method of super light multi-hole class- honeycomb sandwich structure materials

    Directory of Open Access Journals (Sweden)

    Xiang LI

    Full Text Available With the sandwich structure materials' application and promotion in the field of engineering continuously, existing sandwich structure material gradually cannot meet the design requirements. It is very urgent to develop new sandwich structure materials of high efficiency, energy saving and easy to process. The project puts forward and constructs a new kind of class-honeycomb sandwich structure material combined with important application backgrounds that super light and high strength metal sandwich structure materials are applied into the high weight and high energy consumption equipments of automobile, aerospace and machinery and so on. This research involve: mechanical properties equivalent method for the class-honeycomb sandwich structure and its core; Strength, stiffness and inherent frequency characteristic and failure criterions of the class-honeycomb sandwich structure; based on the failure criterions constructing the multiple-constraint models of the class-honeycomb sandwich structure. The research tries to put forward a new method for innovative design of lightweight material and structure and new ideas of lightweight technology research in theory and practice.

  1. Real-time X-ray investigation of aluminum foam sandwich production

    Energy Technology Data Exchange (ETDEWEB)

    Banhart, J.; Stanzick, H. [Fraunhofer-Inst. for Advanced Materials, Bremen (Germany); Helfen, L.; Baumbach, T. [Fraunhofer-Inst. for Non-Destructive Testing, Dresden (Germany); Nijhof, K. [Honsel-Werke AG, Meschede (Germany)

    2001-06-01

    The authors study the foaming behavior of Al-based sandwich panels using X-ray radioscopy. X-ray radioscopy is a suitable tool for observing the metal foaming process in general and the production of aluminum foam sandwich panels in particular. The internal structure of the foam can be resolved clearly. (orig.)

  2. A Phloem Sandwich Unit for Observing Bark Beetles, Associated Predators, and Parasites

    Science.gov (United States)

    Donald N. Kim; Mitchel C. Miller

    1981-01-01

    This paper describes a phloem sandwich that allows observation of parent beetles, their brood, and associates within the inner bark, and permits observation of predator and parasite behavior on the bark surface. The construction of the unit permits the introduction of multiple pairs of beetles into a single sandwich.

  3. Sandwich Magnetoelectric Composites of Polyvinylidene Fluoride, Tb-Dy-Fe Alloy, and Lead Zirconate Titanate

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The novel sandwich composites were prepared by sandwiching a polyvinylidene fluoride/Tb-Dy-Fe alloy composite (PVDF/Terfenol-D) between polyvinylidene fluoride/lead zirconate titanate composites(PVDF/PZT). The maximum magnetoelectric effect voltage coefficient, (dE/dH)33max, of the sandwich composites is higher than that of three-phase composites at their own optimal loading level of Terfenol-D. This is attributed to less interface relaxations of strain and better polarization of the sandwich composites. When the volume fraction of Terfenol-D is higher than 0.10, no coupling interaction for three-phase composites could intensity, the magnetoelectric effect voltage coefficient, (dE/dH)33, of sandwich composites is higher than that of three-phase composites; at low magnetic field intensity, (dE/dH)33 of sandwich composites is lower than that of three-phase composites. At their resonance frequency, the (dE/dH)33max of the sandwich composites and the dH)33max at resonance frequency confirms the improvement of maximum magnetoelectric effect coefficient via sandwich-structured composites.

  4. PMI Foam Cored Sandwich Components Produced by Means of Different Manufacturing Methods

    Institute of Scientific and Technical Information of China (English)

    Leonhard Maier; HU Pei; Herman Seibert

    2006-01-01

    The paper introduced the structural applications with PMI (Polymethacrylimide) foams in sandwich components for rotor craft, launching vehicle and civil aircraft and discuss some typically used manufacturing methods, such as e. g.in-mould pressing, autoclave curing and resin infusion. The advantages of foam-cored sandwich design versus honeycombcored design will be discussed, focussing on manufacturing costs.

  5. Failure Investigation of Debonded Sandwich Columns: An Experimental and Numerical Study

    DEFF Research Database (Denmark)

    Moslemian, Ramin; Berggreen, Christian; Carlsson, Leif A.

    2009-01-01

    Failure of compression loaded sandwich columns with an implanted through-width face/core debond is examined. Compression tests were conducted on sandwich columns containing implemented face/core debonds. The strains and out-of-plane displacements of the debonded region were monitored using the di...

  6. Mixed mode fracture toughness characterization of sandwich interfaces using the modified TSD specimen

    DEFF Research Database (Denmark)

    Berggreen, Christian; Andreasen, J.H.; Carlsson, L.A.;

    2009-01-01

    An extensive parametric analysis shows that the modified Tilted Sandwich Debond (TSD) specimen provides a methodology for characterization of the face/core fracture resistance over a range of mode-mixities. A pilot experimental mixed mode characterization of the fracture toughness of sandwich spe...

  7. Experimental validation of the Higher-Order Theory approach for sandwich panels with flexible core materials

    NARCIS (Netherlands)

    Straalen, IJ.J. van

    2000-01-01

    During tthe 1990's the higher-order theory was developed by Frostig to enable detailed stress analyses of sandwich panel structures. To investigate the potentials of this approach experiments are performed on sandwich panels made of thin steel faces and mineral wool or polystyrene core material. A p

  8. Weld nugget formation in resistance spot welding of new lightweight sandwich material

    DEFF Research Database (Denmark)

    Sagüés Tanco, J.; Nielsen, Chris Valentin; Chergui, Azeddine

    2015-01-01

    Weldability of a new lightweight sandwich material, LITECOR®, by resistance spot welding is analyzed by experiments and numerical simulations. The spot welding process is accommodated by a first pulse squeezing out the non-conductive polymer core of the sandwich material locally to allow metal–me...

  9. Robust and Air-Stable Sandwiched Organo-Lead Halide Perovskites for Photodetector Applications

    KAUST Repository

    Mohammed, Omar F.

    2016-02-25

    We report the simplest possible method to date for fabricating robust, air-stable, sandwiched perovskite photodetectors. Our proposed sandwiched structure is devoid of electron or hole transporting layers and also the expensive electrodes. These simpler architectures may have application in the perovskite-only class of solar cells scaling up towards commercialization.

  10. Innovative sandwich concepts open up potential for flat structures. Function-integrated lightweight design; Sandwich-Strukturen fuer den funktionsintegrierten Leichtbau. Fahrzeugleichtbau

    Energy Technology Data Exchange (ETDEWEB)

    Kopp, Gerhard; Friedrich, Horst E. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Stuttgart (Germany). Inst. fuer Fahrzeugkonzepte; Kuppinger, Jan [Fraunhofer-Institut fuer Chemische Technologie (ICT), Pfinztal (Germany). Abt. Polymer-Engineering; Henning, Frank [Fraunhofer-Institut fuer Chemische Technologie (ICT), Pfinztal (Germany). Abt. Polymer-Engineering; DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Stuttgart (Germany). Kompetenzzentrum; Karlsruher Innovationsclusters ' Technologien fuer den hybriden Leichtbau' (Germany)

    2009-07-01

    Sandwich structures make it possible to achieve an optimum combination of material, form and functional lightweight design. Vehicle weight is reduced and resources are saved. However, such solutions can only be used when the overall concept is cost-effective. For this reason, various DLR and Fraunhofer institutes are currently working on new and cost-effective sandwich structures within the 'Competence Centre for Automotive Lightweight Technology' to further exploit this construction method for flat structures. (orig.)

  11. A Novel Sandwich-type Dinuclear Complex for High-capacity Hydrogen Storage%A Novel Sandwich-type Dinuclear Complex for High-capacity Hydrogen Storage

    Institute of Scientific and Technical Information of China (English)

    朱海燕; 陈元振; 李赛; 曹秀贞; 柳永宁

    2012-01-01

    From density functional theory (DFT) calculations, we predicted that the sandwich-type dinuclear organometallic compounds Cpffi2 and Cp2Sc2 can adsorb up to eight hydrogen molecules respectively, corresponding to a high gravimetric storage capacity of 6.7% and 6.8% (w), respectively. These sandwich-type organometallocenes proposed in this work are favorable for reversible adsorption and desorption of hydrogen at ambient conditions.

  12. Software-Defined Cluster

    Institute of Scientific and Technical Information of China (English)

    聂华; 杨晓君; 刘淘英

    2015-01-01

    The cluster architecture has played an important role in high-end computing for the past 20 years. With the advent of Internet services, big data, and cloud computing, traditional clusters face three challenges: 1) providing flexible system balance among computing, memory, and I/O capabilities;2) reducing resource pooling overheads;and 3) addressing low performance-power efficiency. This position paper proposes a software-defined cluster (SDC) architecture to deal with these challenges. The SDC architecture inherits two features of traditional cluster: its architecture is multicomputer and it has loosely-coupled interconnect. SDC provides two new mechanisms: global I/O space (GIO) and hardware-supported native access (HNA) to remote devices. Application software can define a virtual cluster best suited to its needs from resources pools provided by a physical cluster, and traditional cluster ecosystems need no modification. We also discuss a prototype design and implementation of a 32-processor cloud server utilizing the SDC architecture.

  13. Influence of Si buffer layer on the giant magnetoresistance effect in Co/Cu/Co sandwiches

    Institute of Scientific and Technical Information of China (English)

    李冠雄; 沈鸿烈; 沈勤我; 李铁; 邹世昌

    2000-01-01

    The Co/Cu/Co sandwiches with a semiconductor Si buffer layer were prepared by high vacuum electron-beam evaporation. The influence of the Si buffer layer with different thickness on the giant magnetoresistance (GMR) effect in the Co/Cu/Co sandwiches was investigated. It was found that the GMR showed an obvious anisotropy when the thickness of Si buffer layer was larger than or equal to 0.9 nm, and that the GMR was basically isotropic with an Si buffer layer thinner than 0.9 nm. The anisotropic behavior of GMR can be ascribed to the in-plane magnetic anisotropy in the sandwiches. Due to the interdiffusion at the Si buffer/Co interface, a Co2Si interface layer with a good (301) texture formed and induced the in-plane magnetic anisotropy in the sandwiches. The dependence of the crystalline texture of the sandwiches on the thickness of Si buffer layer was also studied.

  14. Unidirectional cloning by cleaving heterogeneous sites with a single sandwiched zinc finger nuclease.

    Science.gov (United States)

    Shinomiya, Kazuki; Mori, Tomoaki; Aoyama, Yasuhiro; Sera, Takashi

    2011-11-04

    We previously developed a novel type of zinc finger nucleases (ZFNs), sandwiched ZFNs that can discriminate DNA substrates from cleavage products and thus cleave DNA much more efficiently than conventional ZFNs as well as perform with multiple turnovers like restriction endonucleases. In the present study, we used the sandwiched ZFN to unidirectionally clone exogenous genes into target vectors by cleaving heterogeneous sites that contained heterogeneous spacer DNAs between two zinc-finger protein binding sites with a single sandwiched ZFN. We demonstrated that the sandwiched ZFN cleaved a 40-fold excess of both insert and vector plasmids within 1h and confirmed by sequencing that the resulting recombinants harbored the inserted DNA fragment in the desired orientation. Because sandwiched ZFNs can recognize and cleave a variety of long (≥ 26-bp) target DNAs, they may not only expand the utility of ZFNs for construction of recombinant plasmids, but also serve as useful meganucleases for synthesis of artificial genomes.

  15. An Optimum Analysis Method of Sandwich Structures Made from Elastic-viscoelastic Materials

    Institute of Scientific and Technical Information of China (English)

    CHEN Ying-bo; XIA Yu; REN Zhi-gang; LU Zhe-an; WANG Er-lei

    2004-01-01

    Due to a viscoelastic damping middle layer,sandwich structures have the capacity of energy consumption.In this paper,we describe the frequency-dependent property of viscoelastic materials using complex modulus model,and iterative modal strain energy method and iterative complex eigenvalue method are presented to obtain frequency and loss factor of sandwich structures.The two methods are effective and exact for the large-scale complex composite sandwich structures.Then an optimum analysis method is suggested to apply to sandwich structures.Finally,as an example,an optimum analysis of a clamped-clamped sandwich beams is conducted,theoretical closed-form solution and numerical predictions are studied comparatively,and the results agree well.

  16. Natural Cork Agglomerate Employed as an Environmentally Friendly Solution for Quiet Sandwich Composites

    Science.gov (United States)

    Sargianis, James; Kim, Hyung-ick; Suhr, Jonghwan

    2012-01-01

    Carbon fiber-synthetic foam core sandwich composites are widely used for many structural applications due to their superior mechanical performance and low weight. Unfortunately these structures typically have very poor acoustic performance. There is increasingly growing demand in mitigating this noise issue in sandwich composite structures. This study shows that marrying carbon fiber composites with natural cork in a sandwich structure provides a synergistic effect yielding a noise-free sandwich composite structure without the sacrifice of mechanical performance or weight. Moreover the cork-core sandwich composites boast a 250% improvement in damping performance, providing increased durability and lifetime operation. Additionally as the world seeks environmentally friendly materials, the harvesting of cork is a natural, renewable process which reduces subsequent carbon footprints. Such a transition from synthetic foam cores to natural cork cores could provide unprecedented improvements in acoustic and vibrational performance in applications such as aircraft cabins or wind turbine blades. PMID:22574250

  17. Structural Behaviour of Precast Lightweight Foamed Concrete Sandwich Panel under Axial Load: An Overview

    Directory of Open Access Journals (Sweden)

    Suryani Samsudin

    2013-02-01

    Full Text Available The development of precast sandwich concrete has gained acceptance worldwide in conjunction with the Industrial Building System (IBS.  The advancement and improvement of using wall panel has gone through a lot of achievements through the last decade. The usage of precast lightweight sandwich panel has become the alternative to conventional construction using brick wall. The usage of this panel system contributes to a sustainable and environmental friendly construction.  This paper presents an overview of the latest development in precast concrete sandwich panel as an IBS. The purpose of this paper is to provide comprehensive information on latest research development of sandwich panel for building construction purposes. The information on sandwich panel’s composition, material, properties, strength, availability, and its usage as structural element are reported.  An innovative concept used in the design of these systems and the use of lightweight materials is also discussed.

  18. Analysis and Behaviour of Sandwich Panels with Profiled Metal Facings under Transverse Load

    Directory of Open Access Journals (Sweden)

    M. Budescu

    2004-01-01

    Full Text Available Sandwich panels with thin steel facings and polyurethane core combine the load-carrying capacity of metal facings and protection functions with core properties. The core separates the two facings and keeps them in a stable condition, transmits shear between external layers, provides most of the shear rigidity and occasionally makes of useful contribution to the bending stiffness of the sandwich construction as a whole [1]. An experimental program on sandwich panels has been organized to prove that the mechanical properties of core and interface satisfy the load-carrying requirements for structural sandwich panels. The analysis of sandwich panels with deep profiles facings for cladding elements, respectively the roof constructions, has been carried out according to the European design norms [1], [5].

  19. Computed tomography with single-shot dual-energy sandwich detectors

    Science.gov (United States)

    Kim, Seung Ho; Youn, Hanbean; Kim, Daecheon; Kim, Dong Woon; Jeon, Hosang; Kim, Ho Kyung

    2016-03-01

    Single-shot dual-energy sandwich detector can produce sharp images because of subtraction of images from two sub-detector layers, which have different thick x-ray converters, of the sandwich detector. Inspired by this observation, the authors have developed a microtomography system with the sandwich detector in pursuit of high-resolution bone-enhanced small-animal imaging. The preliminary results show that the bone-enhanced images reconstructed with the subtracted projection data are better in visibility of bone details than the conventionally reconstructed images. In addition, the bone-enhanced images obtained from the sandwich detector are relatively immune to the artifacts caused by photon starvation. The microtomography with the single-shot dual-energy sandwich detector will be useful for the high-resolution bone imaging.

  20. Implementing Software Defined Radio

    CERN Document Server

    Grayver, Eugene

    2013-01-01

    Software Defined Radio makes wireless communications easier, more efficient, and more reliable. This book bridges the gap between academic research and practical implementation. When beginning a project, practicing engineers, technical managers, and graduate students can save countless hours by considering the concepts presented in these pages. The author covers the myriad options and trade-offs available when selecting an appropriate hardware architecture. As demonstrated here, the choice between hardware- and software-centric architecture can mean the difference between meeting an aggressive schedule and bogging down in endless design iterations. Because of the author’s experience overseeing dozens of failed and successful developments, he is able to present many real-life examples. Some of the key concepts covered are: Choosing the right architecture for the market – laboratory, military, or commercial Hardware platforms – FPGAs, GPPs, specialized and hybrid devices Standardization efforts to ens...

  1. Defining cyber warfare

    Directory of Open Access Journals (Sweden)

    Dragan D. Mladenović

    2012-04-01

    Full Text Available Cyber conflicts represent a new kind of warfare that is technologically developing very rapidly. Such development results in more frequent and more intensive cyber attacks undertaken by states against adversary targets, with a wide range of diverse operations, from information operations to physical destruction of targets. Nevertheless, cyber warfare is waged through the application of the same means, techniques and methods as those used in cyber criminal, terrorism and intelligence activities. Moreover, it has a very specific nature that enables states to covertly initiate attacks against their adversaries. The starting point in defining doctrines, procedures and standards in the area of cyber warfare is determining its true nature. In this paper, a contribution to this effort was made through the analysis of the existing state doctrines and international practice in the area of cyber warfare towards the determination of its nationally acceptable definition.

  2. Effects of Honeycomb Cell Size on Performances of Sandwich Panels%蜂窝体胞尺寸对夹芯板性能的影响研究

    Institute of Scientific and Technical Information of China (English)

    孙士平; 赖余东

    2011-01-01

    Honeycomb sandwich panel was studied to reveal the effects of the cell size in the static analysis and the free vibration analysis. The response of the sandwich panel with the homogenized cores was used as the standard of comparison. The ratio of the responses of the detailed finite element models of sandwich panels to the corresponding comparison solutions was defined as a Size Influencing Index that reflects the influences of the size variation of different cell configuration. Based finite element technique, the static and the free variation response of honeycomb sandwich panels with the different cores and the homogenized cores were analyzed comparatively, under three typical boundary conditions, including the hexagonal, triangular and square honeycomb core. The computed results reveal the size effect of the honeycomb cell on the stiffness and the frequency behavior of sandwich panel. It is shown that when the ratio of the macrostructure size to the cell size is larger than 12, the influence of the cell size on the sandwich panel performances tends to gentle weakening. Meanwhile, when the cell size and macrostructure size are comparable with each other, the size effect is quite obvious, and the degree of influence is significantly dependent on the boundary condition and the cell configuration.%研究了周期性夹芯蜂窝体胞尺寸对夹芯板刚度性能、一阶频率的影响规律.以夹芯均匀化等效的夹芯板模型为基准,定义无量纲尺寸影响因子,描述不同蜂窝尺寸夹芯板性能相对均匀化等效模型基准值的变化趋势,量化蜂窝尺寸的影响程度.采用有限元数值方法,开展了不同尺寸、不同构型以及不同边界条件下蜂窝夹芯板性能的比较分析.计算结果表明:夹芯板的刚度性能与频率具有尺寸效应,当夹芯尺寸与蜂窝尺寸比值大于12,蜂窝尺寸的影响程度趋于平缓减弱,当蜂窝尺寸与夹芯尺寸相当时,蜂窝尺寸的影响非常明显,其影

  3. Alkane metathesis with the tantalum methylidene [(≡SiO)Ta(=CH2)Me2]/[(≡SiO)2Ta(=CH2)Me] generated from well-defined surface organometallic complex [(≡SiO)TaVMe4

    KAUST Repository

    Chen, Yin

    2015-01-21

    By grafting TaMe5 on Aerosil700, a stable, well-defined, silica-supported tetramethyl tantalum(V) complex, [(≡SiO)TaMe4], is obtained on the silica surface. After thermal treatment at 150 °C, the complex is transformed into two surface tantalum methylidenes, [(≡SiO)2Ta(=CH2)Me] and [(≡SiO)Ta(=CH2)Me2], which are active in alkane metathesis and comparable to the previously reported [(≡SiO)2TaHx]. Here we present the first experimental study to isolate and identify a surface tantalum carbene as the intermediate in alkane metathesis. A systematic experimental study reveals a new reasonable pathway for this reaction.

  4. Left ventricle remodelling by double-patch sandwich technique

    Directory of Open Access Journals (Sweden)

    Nocchi Andrea

    2007-01-01

    Full Text Available Abstract Background The sandwich double-patch technique was adopted as an alternative method for reconstruction of the left ventricle after excision of postinfarction dysfunctional myocardium to solve technical problems due to the thick edges of the ventricular wall. Methods Over a 5-year period, 12 of 21 patients with postinfarction antero-apical left ventricular aneurysm had thick wall edges after wall excision. It was due to akinetic muscular thick tissue in 6 cases, while in the other 6 with classic fibrous aneurysm, thick edges remained after the cut of the border zone. The ventricular opening was sandwiched between two patches and this is a technique which is currently used for the treatment of the interventricular septum rupture. In our patients the patches are much smaller than the removed aneurysm and they were sutured simply by a single row of single stitches. However, in contrast to interventricular septum rupture where the patches loosen the tension of the tissues, in our patients the patches pull strongly and restrain the walls by fastening their edges and supporting tight stitches. In this way they could narrow the cavity and close the ventricle. Results The resected area varied from 5 × 4 to 8 × 8 cm. Excision was extended into the interventricular septum in 5 patients, thus opening the right ventricle. CABG was performed on all patients but two. Left ventricular volumes and the ejection fraction changed significantly: end-systolic volume 93.5 ± 12.4 to 57.8 ± 8.9 ml, p Conclusion The double-patch sandwich technique (bi-patch closure offers some advantages and does not result in increased morbidity and mortality. In the case of excising a left ventricular aneurysm, this technique in no way requires eversion of the edges, felt strips, buttressed and multiple sutures, all of which are needed for longitudinal linear closure. Moreover, it does not require purse string sutures, endocardial scar remnant to secure the patch or

  5. Defining the Anthropocene

    Science.gov (United States)

    Lewis, Simon; Maslin, Mark

    2016-04-01

    Time is divided by geologists according to marked shifts in Earth's state. Recent global environmental changes suggest that Earth may have entered a new human-dominated geological epoch, the Anthropocene. Should the Anthropocene - the idea that human activity is a force acting upon the Earth system in ways that mean that Earth will be altered for millions of years - be defined as a geological time-unit at the level of an Epoch? Here we appraise the data to assess such claims, first in terms of changes to the Earth system, with particular focus on very long-lived impacts, as Epochs typically last millions of years. Can Earth really be said to be in transition from one state to another? Secondly, we then consider the formal criteria used to define geological time-units and move forward through time examining whether currently available evidence passes typical geological time-unit evidence thresholds. We suggest two time periods likely fit the criteria (1) the aftermath of the interlinking of the Old and New Worlds, which moved species across continents and ocean basins worldwide, a geologically unprecedented and permanent change, which is also the globally synchronous coolest part of the Little Ice Age (in Earth system terms), and the beginning of global trade and a new socio-economic "world system" (in historical terms), marked as a golden spike by a temporary drop in atmospheric CO2, centred on 1610 CE; and (2) the aftermath of the Second World War, when many global environmental changes accelerated and novel long-lived materials were increasingly manufactured, known as the Great Acceleration (in Earth system terms) and the beginning of the Cold War (in historical terms), marked as a golden spike by the peak in radionuclide fallout in 1964. We finish by noting that the Anthropocene debate is politically loaded, thus transparency in the presentation of evidence is essential if a formal definition of the Anthropocene is to avoid becoming a debate about bias. The

  6. 浅析Sandwich 教学法

    Institute of Scientific and Technical Information of China (English)

    田志逢

    2012-01-01

    为了真正实现学生为主体教师为主导的教学模式,我们把Sandwich 教学法引入课堂教学中.从教学内容的选取、课堂的设计、问题的设置、学生的分组、教师的总结等各个环节精心的安排,使得学生积极参与课堂,把课堂真正的交还给学生,从而积极有效的提高了学生学习的兴趣、动力,大幅度提高了教学效果.

  7. Bilateral sandwiched scapulae: A rare presentation of hereditary multiple exostoses.

    Science.gov (United States)

    Mozaffarian, Kamran; Farahani, Mohammad Javad; Vosoughi, Amir Reza

    2016-01-01

    Hereditary multiple exostoses, an autosomal dominant condition, is a common benign tumor which is characterized by the development of multiple osteochondromas. Bilateral dorsal and ventral involvement of scapulae is extremely rare without any reported case in the literature. An 18-year-old girl was referred because of bilateral prominent scapulae and left-sided pain on shoulder girdle motion especially at more than 90° abduction and forward flexion. Radiograph evaluation showed multiple exostoses on ventral and dorsal surfaces of body of both scapulae; hence simple excision of the lesion was impossible. The patient was symptom-free about 18 months after partial scapulectomy of left side. Partial scapulectomy seems to be an effective treatment for the sandwiched scapula between dorsal and ventral benign tumors.

  8. Smearing of chaos in sandwich pp-waves

    CERN Document Server

    Podolsky, J

    1999-01-01

    Recent results demonstrating the chaotic behavior of geodesics in non-homogeneous vacuum pp-wave solutions are generalized. Here we concentrate on motion in non-homogeneous sandwich pp-waves and show that chaos smears as the duration of these gravitational waves is reduced. As the number of radial bounces of any geodesic decreases, the outcome channels to infinity become fuzzy, and thus the fractal structure of the initial conditions characterizing chaos is cut at lower and lower levels. In the limit of impulsive waves, the motion is fully non-chaotic. This is proved by presenting the geodesics in a simple explicit form which permits a physical interpretation, and demonstrates the focusing effect. It is shown that a circle of test particles is deformed by the impulse into a family of closed hypotrochoidal curves in the transversal plane. These are deformed in the longitudinal direction in such a way that a specific closed caustic surface is formed.

  9. Analytical modeling of sandwich beam for piezoelectric bender elements

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Piezoelectric bender elements are widely used as electromechanical sensors and actuators. An analytical sandwich beam model for piezoelectric bender elements was developed based on the first-order shear deformation theory (FSDT), which assumes a single rotation angle for the whole cross-section and a quadratic distribution function for coupled electric potential in piezoelectric layers, and corrects the effect of transverse shear strain on the electric displacement integration. Free vibration analysis of simplysupported bender elements was carried out and the numerical results showed that, solutions of the present model for various thickness-to-length ratios are compared well with the exact two-dimensional solutions, which presents an efficient and accurate model for analyzing dynamic electromechanical responses of bender elements.

  10. Electrowetting-driven oscillating drops sandwiched between two substrates.

    Science.gov (United States)

    Mampallil, Dileep; Eral, H Burak; Staicu, Adrian; Mugele, Frieder; van den Ende, Dirk

    2013-11-01

    Drops sandwiched between two substrates are often found in lab-on-chip devices based on digital microfluidics. We excite azimuthal oscillations of such drops by periodically modulating the contact line via ac electrowetting. By tuning the frequency of the applied voltage, several shape modes can be selected one by one. The frequency of the oscillations is half the frequency of the contact angle modulation by electrowetting, indicating a parametric excitation. The drop response to sinusoidal driving deviates substantially from sinusoidal behavior in a "stop and go" fashion. Although our simple theoretical model describes the observed behavior qualitatively, the resonances appear at lower frequencies than expected. Moreover, the oscillations produce a nonperiodic fluid transport within the drop with a typical velocity of 1 mm/s. In digital microfluidic devices, where the typical drop size is less than 1 mm, this flow can result in very fast mixing on the spot.

  11. FMR studies of single permalloy layers sandwiched by Au

    Energy Technology Data Exchange (ETDEWEB)

    Hurdequint, H. [Laboratoire de Physique des Solides, UMR 8502, Universite Paris-Sud, 91405 ORSAY Cedex (France)]. E-mail: hurdequint@lps.u-psud.fr

    2007-03-15

    Results of FMR studies performed at X-band on two series of thin permalloy (Py) layers sandwiched by Au are reported and analyzed. These two series are characterized by an Au layer thickness of 12 and 6 nm, respectively. The FMR results are compared to the ones obtained for a series of (Py/Al{sub 2}O{sub 3}) control films. A strong interfacial increase of the intrinsic damping is revealed. The spin-orbit perpendicular anisotropy field is also dominated by the metallic interface contribution. Remarkable phenomena evidenced in the angular variation of the FMR spectrum may be well understood in terms of the theoretical description we have developed of the observable signal in a bimetallic (ferro/normal) film.

  12. Standard Test Method for Laboratory Aging of Sandwich Constructions

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1999-01-01

    1.1 This test method covers the determination of the resistance of sandwich panels to severe exposure conditions as measured by the change in selected properties of the material after exposure. The exposure cycle to which the specimen is subjected is an arbitrary test having no correlation with natural weathering conditions. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given may be approximate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  13. Electrowetting-driven oscillating drops sandwiched between two substrates

    Science.gov (United States)

    Mampallil, Dileep; Burak Eral, H.; Staicu, Adrian; Mugele, Frieder; van den Ende, Dirk

    2013-11-01

    Drops sandwiched between two substrates are often found in lab-on-chip devices based on digital microfluidics. We excite azimuthal oscillations of such drops by periodically modulating the contact line via ac electrowetting. By tuning the frequency of the applied voltage, several shape modes can be selected one by one. The frequency of the oscillations is half the frequency of the contact angle modulation by electrowetting, indicating a parametric excitation. The drop response to sinusoidal driving deviates substantially from sinusoidal behavior in a “stop and go” fashion. Although our simple theoretical model describes the observed behavior qualitatively, the resonances appear at lower frequencies than expected. Moreover, the oscillations produce a nonperiodic fluid transport within the drop with a typical velocity of 1 mm/s. In digital microfluidic devices, where the typical drop size is less than 1 mm, this flow can result in very fast mixing on the spot.

  14. Mechanical properties and experimental researches of new CSIPs sandwich panels

    Directory of Open Access Journals (Sweden)

    Du Wenfeng

    2017-01-01

    Full Text Available The advantages of glass fiber reinforced composites (FRP and SIPs (structural insulated panels are combined, and a new type of sandwich panel called composite structural insulated panels (CSIPs is proposed. Through the adhesive bonding, CSIPs are made of FRP as face sheets and expanded polyethylene foam (EPS as a core. To master the mechanical characteristics of CSIPs, firstly, adopting the large deflection theory of Reissener in this paper derived the calculation formula of displacement and the stability critical load of CSIPs. Then, ANSYS software was used to carry on the analysis of finite element simulation. Finally, a testing piece of CSIP with length 1000mm and breath 1000mm was made and a test was done. The results show that the theoretical analysis results, finite element simulation results and test results are basically coincide. So the calculating formula of deformation and bearing capacity of CSIPs are correct. And CSIPs have the outstanding advantages of light weight and high strength.

  15. Applications of thin-film sandwich crystallization platforms.

    Science.gov (United States)

    Axford, Danny; Aller, Pierre; Sanchez-Weatherby, Juan; Sandy, James

    2016-04-01

    Examples are shown of protein crystallization in, and data collection from, solutions sandwiched between thin polymer films using vapour-diffusion and batch methods. The crystallization platform is optimal for both visualization and in situ data collection, with the need for traditional harvesting being eliminated. In wells constructed from the thinnest plastic and with a minimum of aqueous liquid, flash-cooling to 100 K is possible without significant ice formation and without any degradation in crystal quality. The approach is simple; it utilizes low-cost consumables but yields high-quality data with minimal sample intervention and, with the very low levels of background X-ray scatter that are observed, is optimal for microcrystals.

  16. Prediction of the ballistic limit of an aluminium sandwich panel

    Science.gov (United States)

    Campbell, J.; De Vuyst, T.; Vignjevic, R.; Hughes, K.

    2016-08-01

    This paper presents research on modelling the impact of a 150g projectile on a 35mm thick aluminium sandwich panel. The objective of the work is a predictive modelling capability for the ballistic limit of the panel. A predictive modelling capability supports the design of capture and deorbit missions for large items of space debris such as satellites and rocket upper stages. A detailed explicit finite element model was built using the LSDYNA software and results were compared with experimental data for the projectile exit velocity to establish key parameters. The primary parameters influencing the model behaviour were the strength and failure of the aluminium face sheets and the friction between projectile and panel. The model results showed good agreement with experimental results for ogive nose projectiles, but overestimated the exit velocity for flat nose projectiles.

  17. Predicting The Compression Strength Of Impact-Damaged Sandwich Panels

    Science.gov (United States)

    Ratcliffe, James; Jackson, Wade; Schaff, Jeffery

    1990-01-01

    The objective of this work was to develop a technique for predicting the residual compression strength of sandwich panels containing impact damage in one facesheet. The technique was tailored to predict the strength of specimens that exhibit a failure mode involving the formation of kink bands at locations of peak strain in the region of impact damage. Under continued compression loading, the kink bands propagate in a stable manner perpendicular to the applied load. When a critical kink-band length is reached, growth becomes unstable corresponding to panel failure. The analysis follows in two sections. The first section calculates the far-field stress required for stable kink-band growth and the second calculates that required for unstable growth. The residual strength prediction is made when the stress for stable growth becomes equal to that for unstable kink-band growth. Initial comparisons between analysis and experiment show good agreement.

  18. Immunometric Antibody Sandwich Enzyme-Linked Immunosorbent Assay.

    Science.gov (United States)

    Kohl, Thomas O; Ascoli, Carl A

    2017-06-01

    The antibody sandwich enzyme-linked immunosorbent assay (ELISA) is the most commonly used assay for rapid and accurate detection of antigens. It displays greater sensitivity compared with the indirect ELISA and can be used to determine absolute antigen concentrations in unknown samples provided purified antigen standards are available, although it requires the use of two different antibodies. Briefly, wells are coated with antigen-specific capture antibody then incubated with samples containing unknown antigen. Washing removes unbound antigen and exogenous sample protein before incubation with a second antigen-specific detection antibody, washing, and reincubation with a reporter-labeled tertiary antibody. After tertiary antibody is washed off, substrate is added and hydrolysis is measured spectrophotometrically. The signal intensity is directly proportional to the concentration of the antigen in the test sample. © 2017 Cold Spring Harbor Laboratory Press.

  19. On-Surface Synthesis of Sandwich Molecular Nanowires on Graphene.

    Science.gov (United States)

    Huttmann, Felix; Schleheck, Nicolas; Atodiresei, Nicolae; Michely, Thomas

    2017-07-26

    We demonstrate a new synthesis route for the growth of organometallic sandwich molecular nanowires, taking the example of Eu-cyclooctatetraene (EuCot), a predicted ferromagnetic semiconductor. We employ simultaneous exposure of Cot molecules and Eu vapor in ultrahigh vacuum to an inert substrate, such as graphene. Using a Cot excess under temperature conditions of a finite residence time of the molecule, the reactand diffusion confined to two dimensions results in a clean product of ultralong wires. In situ scanning tunneling microscopy reveals not only their molecular structure but also a rich and intriguing growth morphology. The new on-surface synthesis permits experimental access to a largely unexplored class of one-dimensional organometallic systems with potential for exciting electronic and magnetic properties.

  20. Morphology Analysis of Cu Film Fractures in Sandwiched Methylmethacrylate Plates

    Directory of Open Access Journals (Sweden)

    Cristiano Fidani

    2015-06-01

    Full Text Available Thin films of Cu were evaporated on solid plates of polymethylmethacrylate (PMMA. A polymerization process was made to realize sandwiched structure to protect the Cu films. Fracturing of the metal film surface was observed with several morphologies showing two different fracture systems. Surface film morphology was analysed in terms of the distribution area of the islands and contour fractal dimension. The island areas showed a maximum corresponding to 42 nm of the Cu thickness, it was also the threshold to observe the second fracture system. The fractures pattern resulted to be scale invariant with fractal dimensions between 1.55 and 1.7. The minimum fractal dimension also occurred at the film thickness corresponding to the maximum island area. The reported effects can be understood on the basis of different thermal expansion coefficients of the two materials and their thermally induced adhesion.DOI: http://dx.doi.org/10.5755/j01.ms.21.2.6518

  1. Equivariant Equipartitions: Ham Sandwich Theorems for Finite Subgroups of Spheres

    CERN Document Server

    Simon, Steven

    2011-01-01

    Equivariant "Ham Sandwich" Theorems are obtained for the finite subgroups of the unit spheres S^{d-1}, d=1,2,4. Given any F-valued mass distributions on F^n and any non-zero finite subgroup G of the unit sphere S^{d-1} in F= R, C, or H, it is shown that there exists a collection of fundamental G-regions partitioning F^n which "G-Equipartition" each of the n measures, as realized by the simultaneous vanishing of the "G-averages" of the regions' measures. Equipartition results for real measures follow, among them that any n signed mass distributions on R^{(p-1)n} can be equipartitioned by a single regular p-fan for any prime number p.

  2. Nondestructive and Strain Testing of Composite Sandwich Panels

    Science.gov (United States)

    Goyings, Ryan

    In April 2006, Sikorsky Aircraft received a contract from the United States Marine Corps (USMC) to develop a successor to their CH-53E heavy-lift helicopter. The new designation is the CH-53K "Super Stallion" and provides increased operating capabilities through the use of design revisions that incorporate extensive use of carbon fiber composites and composite sandwich panels. "The CH-53K will have five times the capability at half of the operational cost of the aircraft it's replacing. It will be the most capable helicopter ever produced. With more than twice the combat radius of the CH-53E, the CH-53K uses mature technology to deliver a fully shipboard compatible platform to meet current and future Marine Corps requirements". Upon introduction, it will be the largest rotary wing aircraft in the United States Department of Defense. The USMC will incorporate the CH-53K into the Joint Operations Concept of Full Spectrum Dominance and Sea Power 21 thereby enabling rapid, decisive operations and the early termination of conflict by projecting and sustaining forces to distant anti-access, area-denial environments. Even with an increased lift capability, the CH-53K is a slow moving, low flying helicopter susceptible to damage from small arms fire. There is no field level composite repair capability within any maintained documents published by the Department of Defense. Purdue University has developed a field level rapid repair technique capable of returning strength and integrity to damaged carbon composite structural components. The patch is made from carbon fiber weave that is applied using a field capable Vacuum Assisted Resin Transfer Molding (VARTM). This thesis seeks to validate, using nondestructive testing methods and strain monitoring, the manufacturing, damage, and repair process of composite sandwich panels representative of the CH-53K structural panels.

  3. Probabilistic Structural Evaluation of Uncertainties in Radiator Sandwich Panel Design

    Science.gov (United States)

    Kuguoglu, Latife; Ludwiczak, Damian

    2006-01-01

    The Jupiter Icy Moons Orbiter (JIMO) Space System is part of the NASA's Prometheus Program. As part of the JIMO engineering team at NASA Glenn Research Center, the structural design of the JIMO Heat Rejection Subsystem (HRS) is evaluated. An initial goal of this study was to perform sensitivity analyses to determine the relative importance of the input variables on the structural responses of the radiator panel. The desire was to let the sensitivity analysis information identify the important parameters. The probabilistic analysis methods illustrated here support this objective. The probabilistic structural performance evaluation of a HRS radiator sandwich panel was performed. The radiator panel structural performance was assessed in the presence of uncertainties in the loading, fabrication process variables, and material properties. The stress and displacement contours of the deterministic structural analysis at mean probability was performed and results presented. It is followed by a probabilistic evaluation to determine the effect of the primitive variables on the radiator panel structural performance. Based on uncertainties in material properties, structural geometry and loading, the results of the displacement and stress analysis are used as an input file for the probabilistic analysis of the panel. The sensitivity of the structural responses, such as maximum displacement and maximum tensile and compressive stresses of the facesheet in x and y directions and maximum VonMises stresses of the tube, to the loading and design variables is determined under the boundary condition where all edges of the radiator panel are pinned. Based on this study, design critical material and geometric parameters of the considered sandwich panel are identified.

  4. Experimental study of the mechanical behaviour of pin reinforced foam core sandwich materials under shear load

    Science.gov (United States)

    Dimassi, M. A.; Brauner, C.; Herrmann, A. S.

    2016-03-01

    Sandwich structures with a lightweight closed cell hard foam core have the potential to be used in primary structures of commercial aircrafts. Compared to honeycomb core sandwich, the closed cell foam core sandwich overcomes the issue of moisture take up and makes the manufacturing of low priced and highly integrated structures possible. However, lightweight foam core sandwich materials are prone to failure by localised external loads like low velocity impacts. Invisible cracks could grow in the foam core and threaten the integrity of the structure. In order to enhance the out-of-plane properties of foam core sandwich structures and to improve the damage tolerance (DT) dry fibre bundles are inserted in the foam core. The pins are infused with resin and co-cured with the dry fabric face sheets in an out-of-autoclave process. This study presents the results obtained from shear tests following DIN 53294-standard, on flat sandwich panels. All panels were manufactured with pin-reinforcement manufactured with the Tied Foam Core Technology (TFC) developed by Airbus. The effects of pin material (CFRP and GFRP) and pin volume fraction on the shear properties of the sandwich structure and the crack propagation were investigated and compared to a not pinned reference. It has been concluded that the pin volume fraction has a remarkable effect on the shear properties and damage tolerance of the observed structure. Increasing the pin volume fraction makes the effect of crack redirection more obvious and conserves the integrity of the structure after crack occurrence.

  5. EFFECT OF DIVIDED CORE ON THE BENDING PERFORMANCES OF TEXTILE REINFORCED FOAM CORE SANDWICH COMPOSITES

    Directory of Open Access Journals (Sweden)

    ALPYILDIZ Tuba

    2016-05-01

    Full Text Available Sandwich composites are generally used in marine applications, wind turbines, space and aircraft vehicles due to their high bending rigidities in addition to their lighter weights. The objective of this study is to investigate the effect of divided foam core and interlayer sheet of glass fabric on the bending performances of sandwich composites which are manufactured with glass fabrics as the facesheets/interlayer sheets and PVC foam as the core material. Sandwich composites with single and divided core are manufactured and compared in terms of flexural behavious via three point bending tests. It is found that the bending performance is enhanced with the use of divided core and using divided core does not affect the behaviour of the sandwich composite against bending deformations. In the case of the plain core sandwich composite, dividing the core is advised for certain applications rather than perforating the core to increase the bending stiffness and strength of the textile reinforced sandwich composites because it is possible to purchase core with any thickness and there is no need for additional process such as perforation. The proposed application could enhance the bending performances without altering the weight and cost of the sandwich composites, which are preferred due to their higher bending rigidities in relation to their lighter weights.

  6. On defining dietary fibre.

    Science.gov (United States)

    DeVries, Jonathan W

    2003-02-01

    Establishing a definition for dietary fibre has historically been a balance between nutrition knowledge and analytical method capabilities. While the most widely accepted physiologically-based definitions have generally been accurate in defining the dietary fibre in foods, scientists and regulators have tended, in practice, to rely on analytical procedures as the definitional basis in fact. As a result, incongruities between theory and practice have resulted in confusion regarding the components that make up dietary fibre. In November 1998 the president of the American Association of Cereal Chemists (AACC) appointed an expert scientific review committee and charged it with the task of reviewing and, if necessary, updating the definition of dietary fibre. The committee was further charged with assessing the state of analytical methodology and making recommendations relevant to the updated definition. After due deliberation, an updated definition of dietary fibre was delivered to the AACC Board of Directors for consideration and adoption (Anon, 2000; Jones 2000b). The updated definition includes the same food components as the historical working definition used for approximately 30 years (a very important point, considering that the majority of the research of the past 30 years delineating the positive health effects of dietary fibre is based on that working definition). However, the updated definition more clearly delineates the make-up of dietary fibre and its physiological functionality. As a result, relatively few changes will be necessary in analytical methodology. Current methodologies, in particular AACC-approved method of analysis 32-05 (Grami, 2000), Association of Official Analytical Chemists' official method of analysis 985.29 (Horwitz, 2000a) or AACC 32-07 (Grami, 2000) Association of Official Analytical Chemists 991.43 (Horwitz, 2000a) will continue to be sufficient and used for most foods. A small number of additional methods will be necessary to

  7. Development Of Advanced Sandwich Core Topologies Using Fused Deposition Modeling And Electroforming Processes

    Science.gov (United States)

    Storck, Steven M.

    New weight efficient materials are needed to enhance the performance of vehicle systems allowing increased speed, maneuverability and fuel economy. This work leveraged a multi-length-scale composite approach combined with hybrid material methodology to create new state-of-the-art additive manufactured sandwich core material. The goal of the research was to generate a new material to expands material space for strength versus density. Fused-Deposition-Modeling (FDM) was used to remove geometric manufacturing constraints, and electrodepositing was used to generate a high specific-strength, bio-inspired hybrid material. Microtension samples (3mm x 1mm with 250mum x 250mum gage) were used to investigate the electrodeposited coatings in the transverse (TD) and growth (GD) directions. Three bath chemistries were tested: copper, traditional nickel sulfamate (TNS) nickel, and nickel deposited with a platinum anode (NDPA). NDPA shows tensile strength exceeding 1600 MPa, significantly beyond the literature reported values of 60MPa. This strengthening was linked to grain size refinement into the sub-30nm range, in addition to grain texture refinement resulting in only 17% of the slip systems for nickel being active. Anisotropy was observed in nickel deposits, which was linked to texture evolution inside of the coating. Microsample testing guided the selection of 15mum layer of copper deposition followed by a 250 mum NDPA layer. Classical formulas for structural collapse were used to guide an experimental parametric study to establish a weight/volume efficient strut topology. Length, diameter and thickness were all investigated to determine the optimal column topology. The most optimal topology exists when Eulerian buckling, shell micro buckling and yielding failure modes all exist in a single geometric topology. Three macro-scale sandwich topologies (pyramidal, tetrahedral, and strut-reinforced-tetrahedral (SRT) were investigated with respect to strength-per-unit-weight. The

  8. Remarkable reduction in the threshold voltage of pentacene-based thin film transistors with pentacene/CuPc sandwich configuration

    Directory of Open Access Journals (Sweden)

    Yi Li

    2014-06-01

    Full Text Available This study investigates the remarkable reduction in the threshold voltage (VT of pentacene-based thin film transistors with pentacene/copper phthalocyanine (CuPc sandwich configuration. This reduction is accompanied by increased mobility and lowered sub-threshold slope (S. Sandwich devices coated with a 5 nm layer of CuPc layer are compared with conventional top-contact devices, and results indicate that VT decreased significantly from −20.4 V to −0.2 V, that mobility increased from 0.18 cm2/Vs to 0.51 cm2/Vs, and that S was reduced from 4.1 V/dec to 2.9 V/dec. However, the on/off current ratio remains at 105. This enhanced performance could be attributed to the reduction in charge trap density by the incorporated CuPc layer. Results suggest that this method is simple and effectively generates pentacene-based organic thin film transistors with high mobility and low VT.

  9. Research on a Novel Exciting Method for a Sandwich Transducer Operating in Longitudinal-Bending Hybrid Modes.

    Science.gov (United States)

    Liu, Yingxiang; Shen, Qiangqiang; Shi, Shengjun; Deng, Jie; Chen, Weishan; Wang, Liang

    2017-06-27

    A novel exciting method for a sandwich type piezoelectric transducer operating in longitudinal-bending hybrid vibration modes is proposed and discussed, in which the piezoelectric elements for the excitations of the longitudinal and bending vibrations share the same axial location, but correspond to different partitions. Whole-piece type piezoelectric plates with three separated partitions are used, in which the center partitions generate the first longitudinal vibration, while the upper and lower partitions produce the second bending vibration. Detailed comparisons between the proposed exciting method and the traditional one were accomplished by finite element method (FEM) calculations, which were further verified by experiments. Compared with the traditional exciting method using independent longitudinal ceramics and bending ceramics, the proposed method achieves higher electromechanical coupling factors and larger vibration amplitudes, especially for the bending vibration mode. This novel exciting method for longitudinal-bending hybrid vibrations has not changed the structural dimensions of the sandwich transducer, but markedly improves the mechanical output ability, which makes it very helpful and meaningful in designing new piezoelectric actuators operated in longitudinal-bending hybrid vibration modes.

  10. Sandwich Structure-like Meshes Fabricated via Electrospinning for Controllable Release of Zoledronic Acid

    Institute of Scientific and Technical Information of China (English)

    LU Jian; LIU Jian-guo; SONG Xiao-feng; CHEN Xue-si; WU Xiao-dong

    2011-01-01

    Novel sandwich structure-like nanofiber multilayered meshes were fabricated via electrospinning. The purpose of the present work was to control zoledronic acid release via the novel structure of sandwich structure-like meshes. The in vitro release experiments reveal that the drug release speed and initial burst release were controllable by adjusting the thicknesses of electrospun barrier mesh and drug-loaded mesh. Compared with those of other drug delivery systems, the main advantages of the sandwich structure-like fiber meshes are facile preparation conditions and the generality for hydrophobic and hydrophilic pharmaceuticals.

  11. Modelling of Debond and Crack Propagation in Sandwich Structures Using Fracture and Damage Mechanics

    DEFF Research Database (Denmark)

    Berggreen, C.; Simonsen, Bo Cerup; Toernqvist, Rikard

    2003-01-01

    Skin-core de-bonding or core crack propagation will often be dominating mechanisms in the collapse modes of sandwich structures. This paper presents two different methods for prediction of crack propagation in a sandwich structure: a fracture mechanics approach, where a new mode-mix method...... is presented, and a local damage mechanics approach. The paper presents a real-life application example, where the superstructure in a vessel pulls the skin off the sandwich deck. The calculations show almost unstable crack growth initially followed by a stabilization, and a nearly linear relation between...

  12. Improving Performance of Polymer Fiber Reinforced Sandwich X-Joints in Naval Vessels

    DEFF Research Database (Denmark)

    Lundsgaard-Larsen, Christian; Berggreen, Christian; Karlsen, Kasper;

    2007-01-01

    This study deals with damage tolerance of sandwich X-joints with embedded debond damages between face and core. The study is conducted both through modeling and full-scale tests. Mixed mode cohesive laws from the opening of sandwich interfaces are determined experimentally from a DCB specimen...... loaded by moments, and the results are utilized in a cohesive zone model of a tested sandwich structure. Results of the crack propagation from experiments and simulation show fair agreement. Design aspects regarding the influence of debond size and core inserts on the residual strength are discussed....

  13. A comparative study of the impact properties of sandwich materials with different cores

    Directory of Open Access Journals (Sweden)

    Viot P.

    2012-08-01

    Full Text Available Sandwich panels are made of two high strength skins bonded to either side of a light weight core and are used in applications where high stiffness combined with low structural weight is required. The purpose of this paper is to compare the mechanical response of several sandwich panels whose core materials are different. Sandwich panels with glass fibre-reinforced polymer face sheets were used, combined with five different cores; polystyrene foam, polypropylene honeycomb, two different density Balsa wood and Cork. All specimens were subjected to low velocity impact and their structural response (Force-displacement curves were compared to quasistatic response of the panel tested using an hemispherical indenter.

  14. Design Considerations for Thermally Insulating Structural Sandwich Panels for Hypersonic Vehicles

    Science.gov (United States)

    Blosser, Max L.

    2016-01-01

    Simplified thermal/structural sizing equations were derived for the in-plane loading of a thermally insulating structural sandwich panel. Equations were developed for the strain in the inner and outer face sheets of a sandwich subjected to uniaxial mechanical loads and differences in face sheet temperatures. Simple equations describing situations with no viable solution were developed. Key design parameters, material properties, and design principles are identified. A numerical example illustrates using the equations for a preliminary feasibility assessment of various material combinations and an initial sizing for minimum mass of a sandwich panel.

  15. The Influence of Face Sheet Wrinkle Defects on the Performance of FRP Sandwich Structures

    DEFF Research Database (Denmark)

    Hayman, Brian; Berggreen, Carl Christian; Pettersson, Robert

    2005-01-01

    reported here, the influence of wrinkle defects on the in-plane compressive strength of quasiisotropic CFRP laminates used in PVC foam-cored sandwich panels has been investigated by three approaches: testing of sandwich beam specimens in fourpoint bending, testing of sandwich panels with in......Wrinkle defects may reduce the compressive strength of a face laminate for inplane loading applied perpendicularly to the line of the wrinkle. To be able to decide whether a repair is needed it is necessary to know the magnitude of the strength reduction for a given wrinkle geometry. In the studies...

  16. A comparative study of the impact properties of sandwich materials with different cores

    Science.gov (United States)

    Ramakrishnan, K. R.; Shankar, K.; Viot, P.; Guerard, S.

    2012-08-01

    Sandwich panels are made of two high strength skins bonded to either side of a light weight core and are used in applications where high stiffness combined with low structural weight is required. The purpose of this paper is to compare the mechanical response of several sandwich panels whose core materials are different. Sandwich panels with glass fibre-reinforced polymer face sheets were used, combined with five different cores; polystyrene foam, polypropylene honeycomb, two different density Balsa wood and Cork. All specimens were subjected to low velocity impact and their structural response (Force-displacement curves) were compared to quasistatic response of the panel tested using an hemispherical indenter.

  17. The pleural sandwich sign in two cases of primary pleural lymphoma

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yoo Kyung; Lee, Myung Jae; Ryu, Yon Ju; Cho, Min Sun [School of Medicine, Ewha Womans University, Seoul (Korea, Republic of)

    2015-02-15

    The sandwich sign is used to describe mesenteric lymphoma in which mesenteric vessels and fat are enveloped by enlarged mesenteric lymph nodes. We present two cases of primary pleural lymphoma demonstrating the 'pleural sandwich sign'. Contrast-enhanced computed tomography showed conglomerated parietal pleural and extrapleural masses encasing the intercostal arteries. Histopathological examinations confirmed low grade marginal zone B-cell lymphoma in an 80-year-old man and diffuse large B-cell lymphoma in a 68-year-old man. The pleural sandwich sign may suggest the diagnosis of primary pleural lymphoma.

  18. Elastic constants for superplastically formed/diffusion-bonded corrugated sandwich core

    Science.gov (United States)

    Ko, W. L.

    1980-01-01

    Formulas and associated graphs for evaluating the effective elastic constants for a superplastically formed/diffusion bonded (SPF/DB) corrugated sandwich core, are presented. A comparison of structural stiffnesses of the sandwich core and a honeycomb core under conditions of equal sandwich core density was made. The stiffness in the thickness direction of the optimum SPF/DB corrugated core (that is, triangular truss core) is lower than that of the honeycomb core, and that the former has higher transverse shear stiffness than the latter.

  19. Anchoring a Defined Sequence to the 55' Ends of mRNAs : The Bolt to Clone Rare Full Length mRNAs and Generate cDNA Libraries porn a Few Cells.

    Science.gov (United States)

    Baptiste, J; Milne Edwards, D; Delort, J; Mallet, J

    1993-01-01

    Among numerous applications, the polymerase chain reaction (PCR) (1,2) provides a convenient means to clone 5' ends of rare mRNAs and to generate cDNA libraries from tissue available in amounts too low to be processed by conventional methods. Basically, the amplification of cDNAs by the PCR requires the availability of the sequences of two stretches of the molecule to be amplified. A sequence can easily be imposed at the 5' end of the first-strand cDNAs (corresponding to the 3' end of the mRNAs) by priming the reverse transcription with a specific primer (for cloning the 5' end of rare messenger) or with an oligonucleotide tailored with a poly (dT) stretch (for cDNA library construction), taking advantage of the poly (A) sequence that is located at the 3' end of mRNAs. Several strategies have been devised to tag the 3' end of the ss-cDNAs (corresponding to the 55' end of the mRNAs). We (3) and others have described strategies based on the addition of a homopolymeric dG (4,5) or dA (6,7) tail using terminal deoxyribonucleotide transferase (TdT) ("anchor-PCR" [4]). However, this strategy has important limitations. The TdT reaction is difficult to control and has a low efficiency (unpublished observations). But most importantly, the return primers containing a homopolymeric (dC or dT) tail generate nonspecific amplifications, a phenomenon that prevents the isolation of low abundance mRNA species and/or interferes with the relative abundance of primary clones in the library. To circumvent these drawbacks, we have used two approaches. First, we devised a strategy based on a cRNA enrichment procedure, which has been useful to eliminate nonspecific-PCR products and to allow detection and cloning of cDNAs of low abundance (3). More recently, to avoid the nonspecific amplification resulting from the annealing of the homopolymeric tail oligonucleotide, we have developed a novel anchoring strategy that is based on the ligation of an oligonucleotide to the 35' end of ss

  20. Miniature EVA Software Defined Radio

    Science.gov (United States)

    Pozhidaev, Aleksey

    2012-01-01

    As NASA embarks upon developing the Next-Generation Extra Vehicular Activity (EVA) Radio for deep space exploration, the demands on EVA battery life will substantially increase. The number of modes and frequency bands required will continue to grow in order to enable efficient and complex multi-mode operations including communications, navigation, and tracking applications. Whether conducting astronaut excursions, communicating to soldiers, or first responders responding to emergency hazards, NASA has developed an innovative, affordable, miniaturized, power-efficient software defined radio that offers unprecedented power-efficient flexibility. This lightweight, programmable, S-band, multi-service, frequency- agile EVA software defined radio (SDR) supports data, telemetry, voice, and both standard and high-definition video. Features include a modular design, an easily scalable architecture, and the EVA SDR allows for both stationary and mobile battery powered handheld operations. Currently, the radio is equipped with an S-band RF section. However, its scalable architecture can accommodate multiple RF sections simultaneously to cover multiple frequency bands. The EVA SDR also supports multiple network protocols. It currently implements a Hybrid Mesh Network based on the 802.11s open standard protocol. The radio targets RF channel data rates up to 20 Mbps and can be equipped with a real-time operating system (RTOS) that can be switched off for power-aware applications. The EVA SDR's modular design permits implementation of the same hardware at all Network Nodes concept. This approach assures the portability of the same software into any radio in the system. It also brings several benefits to the entire system including reducing system maintenance, system complexity, and development cost.

  1. Application of Sandwich Co-injection Molding Technology for Sanitary Products%夹芯共注成型技术在卫浴行业的应用

    Institute of Scientific and Technical Information of China (English)

    王湘冀; 陈怀民; 李德勤

    2012-01-01

    卫浴制品生产行业需消耗大量优质塑料原料,而多层制品结构固有的缺点并不适合于卫浴制品.通过对央芯共注成形原理及特性的分析,在马桶盖产品的设计及制造中使用央芯共注成型技术,夹芯共注成型产品中二次料质量约占总质量的40%,节约大量优质塑料.文中指出卫浴等其它优质塑料消耗量大的行业,采用央芯共注成型技术,可大量利用生产过程中产生二次料和回收塑料,降低产品制造成本.%Sanitary products industry generating needed a large number of high-quality plastic materials, but the inherent shortcomings of multilayer structure were not suitable for bathroom products. Through analysis to principle and characteristics of sandwich co-injection molding, the toilet seat product design and manufac turing used sandwich co-injection molding technology. The qualities of reclaimed materials of sandwich injec tion molding products were in the total mass of about 40% , saving a lot of high-quality plastic. The paper pointed out that the sanitary and other industries consumed a jarge amount of good quality plastic, if using re claimed material and recycling plastic by sandwich co-injection molding technology, the manufacturing costs could be reduced.

  2. Fabrication and Characterization of Li-6 Sandwich Detector

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Kiwhan [Future and Challenge Technology Co., Yongin (Korea, Republic of); Iliev, Metodi; Ianakiev, Kiril; Swinhoe, Martyn [Los Alamos National Laboratory, New Mexico (United States)

    2014-10-15

    Lithium-6 has been used as a radiation detector material for its ability to react with thermal neutrons, producing alphas and tritons as the primary charged particles during the neutron conversion reaction. Lithium-6 has a thermal neutron cross section of 940 barns, producing a 2.05 MeV alpha particle and a 2.73 MeV triton in a back to back symmetry to conserve energy and momentum, if the incident thermal neutron has low energy. The most widely recognized thermal neutron conversion reaction involves He-3. A He-3 atom has a thermal neutron cross section of 5330 barns, but its resulting particles have total 0.764 MeV to share between a proton and triton. The use of He-3 gas is not limited to homeland security and international safe-guards programs; the high energy physics and medical communities all benefit from the unique capabilities of He-3. As fission neutrons enter the sandwich medium consisting of light guides, plastic scintillator, and lithium-6 foil, they lose energy in the volume. Some neutrons are reduced to thermal energy range and interact with lithium-6 atoms, producing a triton and an alpha particle during the reaction. The primary charged particles then impart their energies in the plastic scintillator film, producing photons. The photons then travels toward the ends of the light guide strips and get collected by the PMTs. Initially, the lithium-6 metal was in storage for many years at the Y-12 National Security Complex, Oak Ridge, Tenneessee, and the metal piece needed reprocessing as shown in Fig. 3. The piece was transported to a lithium battery production facility which had the capability to reprocess lithium ingots. After the metal was reprocessed, it was purified to 95% enrichment and regained sheen (Fig. 4). The foil was extruded as 50-micron, 5 cm-wide strips as shown in inset of Fig. 4. The rolls were stored in an airtight pouch which was filled with dry argon and sealed in a metal container capable of withstanding long term storage as shown

  3. Twistable and bendable actuator: a CNT/polymer sandwich structure driven by thermal gradient.

    Science.gov (United States)

    Seo, Dong Kyun; Kang, Tae June; Kim, Dae Weon; Kim, Yong Hyup

    2012-02-24

    We demonstrate a novel configuration of an electrothermal actuator (ETA), which is based on a polydimethylsiloxane (PDMS) slab sandwiched by upper and lower active layers of CNT-PDMS composite. When only one active layer of a single sandwich structure ETA is heated and the other is not, there exists a thermal gradient in the direction of the slab thickness, resulting in bending motion toward the unheated side. Moreover, a dual sandwich structure ETA, consisting of two parallel assembled sandwich structures on the same body, has the unique ability to act with a twisting motion as the two ETAs bend in opposite directions. We expect the advent of the bendable and twistable actuator to break new ground in ETAs.

  4. Novel sandwich structure adsorptive membranes for removal of 4-nitrotoluene from water

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Yuexin [College of Chemistry, Beijing Normal University, Beijing 100875 (China); School of Pharmacy, North China University of Science and Technology, Tangshan 063000 (China); Jia, Zhiqian, E-mail: zhqjia@bnu.edu.cn [College of Chemistry, Beijing Normal University, Beijing 100875 (China)

    2016-11-05

    Highlights: • Novel sandwich PES-SPES/PS-PDVB/PTFE adsorptive membranes were prepared. • The removal efficiency for 4-nitrotoluene is greater than 95% after five recycles. • The membrane showed higher adsorption capacity than that of mixed matrix membrane. - Abstract: Novel sandwich PES-SPES/PS-PDVB/PTFE adsorptive membranes were prepared by a filtration/immersion precipitation method and employed for the removal of 4-nitrotoluene from water. The static adsorption thermodynamics, kinetics, dynamic adsorption/desorption and membrane reusability were investigated. The results showed that the Freundlich model describes the adsorption isotherm satisfactorily. With increased PS-PDVB content, the maximum static adsorption capacity, partition coefficient, apparent adsorption rate constant, and dynamic adsorption capacity all significantly increased. The sandwich membranes showed much higher removal efficiency and adsorption capacity than those of mixed matrix membranes. With respect to dynamics adsorption/desorption, the sandwich membranes exhibited excellent reusability, with a removal efficiency greater than 95% even after five recycles.

  5. A variable transverse stiffness sandwich structure using fluidic flexible matrix composites (F2MC)

    Science.gov (United States)

    Li, Suyi; Lotfi, Amir; Shan, Ying; Wang, K. W.; Rahn, Christopher D.; Bakis, Charles E.

    2008-03-01

    Presented in this paper is the development of a novel honeycomb sandwich panel with variable transverse stiffness. In this structure, the traditional sandwich face sheets are replaced by the fluidic flexible matrix composite (F2MC) tube layers developed in recent studies. The F2MC layers, combined with the anisotropic honeycomb core material properties, provide a new sandwich structure with variable stiffness properties for transverse loading. In this research, an analytical model is derived based on Lekhitskii's anisotropic pressurized tube solution and Timoshenko beam theory. Experimental investigations are also conducted to verify the analytical findings. A segmented multiple-F2MC-tube configuration is synthesized to increase the variable stiffness range. The analysis shows that the new honeycomb sandwich structure using F2MC tubes of 10 segments can provide a high/low transverse stiffness ratio of 60. Segmentation and stiffness control can be realized by an embedded valve network, granting a fast response time.

  6. Blast-Resistant Improvement of Sandwich Armor Structure with Aluminum Foam Composite

    Directory of Open Access Journals (Sweden)

    Shu Yang

    2013-01-01

    Full Text Available Sandwich armor structures with aluminum foam can be utilized to protect a military vehicle from harmful blast load such as a landmine explosion. In this paper, a system-level dynamic finite element model is developed to simulate the blast event and to evaluate the blast-resistant performance of the sandwich armor structure. It is found that a sandwich armor structure with only aluminum foam is capable of mitigating crew injuries under a moderate blast load. However, a severe blast load causes force enhancement and results in much worse crew injury. An isolating layer between the aluminum foam and the vehicle floor is introduced to remediate this drawback. The results show that the blast-resistant capability of the innovative sandwich armor structure with the isolating layer increases remarkably.

  7. Theoretical Calculation and Analysis of Slip and Deformation for Concrete Sandwich Panels

    Institute of Scientific and Technical Information of China (English)

    LI Yanbo; ZHANG Shaohua; XIA Baoyang

    2007-01-01

    Slip and deformation of concrete sandwich panels under uniformly distributed loads is concerned. The effect of slip on the deformation of concrete sandwich panels are studied, and the analytical expressions of slip and deformation for concrete sandwich panels is obtained. These formulae can describe the slip distribution and account for its effect on deformation. In order to restrict the bound of formula, the formula of crack moment is obtained. The results of theoretical calculation are compared with those of tests and finite element methods. The comparison shows that the results of theoretical calculation are in accord with those of tests and finite element methods. So the theoretical calculation can be used to calculate slip and deformation of concrete sandwich panels in practical projects.

  8. Analytical study of sandwich structures using Euler-Bernoulli beam equation

    Science.gov (United States)

    Xue, Hui; Khawaja, H.

    2017-01-01

    This paper presents an analytical study of sandwich structures. In this study, the Euler-Bernoulli beam equation is solved analytically for a four-point bending problem. Appropriate initial and boundary conditions are specified to enclose the problem. In addition, the balance coefficient is calculated and the Rule of Mixtures is applied. The focus of this study is to determine the effective material properties and geometric features such as the moment of inertia of a sandwich beam. The effective parameters help in the development of a generic analytical correlation for complex sandwich structures from the perspective of four-point bending calculations. The main outcomes of these analytical calculations are the lateral displacements and longitudinal stresses for each particular material in the sandwich structure.

  9. Interfacial Crack Arrest in Sandwich Panels with Embedded Crack Stoppers Subjected to Fatigue Loading

    Science.gov (United States)

    Martakos, G.; Andreasen, J. H.; Berggreen, C.; Thomsen, O. T.

    2017-02-01

    A novel crack arresting device has been implemented in sandwich panels and tested using a special rig to apply out-of-plane loading on the sandwich panel face-sheets. Fatigue crack propagation was induced in the face-core interface of the sandwich panels which met the crack arrester. The effect of the embedded crack arresters was evaluated in terms of the achieved enhancement of the damage tolerance of the tested sandwich panels. A finite element (FE) model of the experimental setup was used for predicting propagation rates and direction of the crack growth. The FE simulation was based on the adoption of linear fracture mechanics and a fatigue propagation law (i.e. Paris law) to predict the residual fatigue life-time and behaviour of the test specimens. Finally, a comparison between the experimental results and the numerical simulations was made to validate the numerical predictions as well as the overall performance of the crack arresters.

  10. Templating odd numbered magnetic rings: oxovanadium heptagons sandwiched by beta-cyclodextrins.

    Science.gov (United States)

    Hoshino, Norihisa; Nakano, Motohiro; Nojiri, Hiroyuki; Wernsdorfer, Wolfgang; Oshio, Hiroki

    2009-10-28

    The oxovanadium heptagons sandwiched by beta-cyclodextrins showed stepped magnetization curves, which were characteristic of level crossings of spin sublevels. Doubly degenerate ground Kramers' doublets split into two spin states, and the splitting energy gaps depend upon ring distortions.

  11. The Influence of Face Sheet Wrinkle Defects on the Performance of FRP Sandwich Structures

    DEFF Research Database (Denmark)

    Hayman, Brian; Berggreen, Carl Christian; Pettersson, Robert

    2005-01-01

    Wrinkle defects may reduce the compressive strength of a face laminate for inplane loading applied perpendicularly to the line of the wrinkle. To be able to decide whether a repair is needed it is necessary to know the magnitude of the strength reduction for a given wrinkle geometry. In the studies...... reported here, the influence of wrinkle defects on the in-plane compressive strength of quasiisotropic CFRP laminates used in PVC foam-cored sandwich panels has been investigated by three approaches: testing of sandwich beam specimens in fourpoint bending, testing of sandwich panels with in......-plane compression, and finite element simulation. Wrinkles involving different numbers of plies have been considered. Two different sandwich lay-ups typical of deck and hull bottom panels in a naval ship have been included....

  12. The Effect of Face Sheet Wrinkle Defects on the Strength of FRP Sandwich Structures

    DEFF Research Database (Denmark)

    Hayman, Brian; Berggreen, Christian; Pettersson, Robert

    2007-01-01

    Wrinkle defects may reduce the compressive strength of a face laminate for in-plane loading applied perpendicularly to the line of the wrinkle. To be able to decide whether a repair is needed, it is necessary to know the magnitude of the strength reduction for a given wrinkle geometry....... In the studies reported here, the influence of wrinkle defects on the in-plane compressive strength of quasi-isotropic carbon fiber reinforced plastic (CFRP) laminates used in PVC foam-cored sandwich panels has been investigated by three approaches: testing of sandwich beam specimens in four-point bending......, testing of sandwich panels with inplane compression, and finite element simulation. Wrinkles involving different numbers of plies have been considered. Two different sandwich lay-ups typical of deck and hull bottom panels in naval ships have been included....

  13. Vibroacoustic optimization of anti-tetrachiral and auxetic hexagonal sandwich panels with gradient geometry

    Science.gov (United States)

    Ranjbar, Mostafa; Boldrin, Luca; Scarpa, Fabrizio; Neild, Simon; Patsias, Sophoclis

    2016-05-01

    The work describes the vibroacoustic behavior of anti-tetrachiral and auxetic hexagonal gradient sandwich panels using homogenized finite element models to determine the mechanical properties of the auxetic structures, the natural frequencies and radiated sound power level of sandwich panels made by the auxetic cores. The mechanical properties and the vibroacoustic behavior of auxetic hexagonal sandwich panels are investigated as a benchmark. The radiated sound power level of the structure over the frequency range of 0-1000 Hz is minimized by modifying the core geometry of the gradient auxetic sandwich panels. Several excitation cases are considered. First-order and random optimization methods are used for the minimization of radiated sound power level of the structures. The results of this study present significant insights into the design of auxetic structures with respect to their vibroacoustical properties.

  14. Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load

    Directory of Open Access Journals (Sweden)

    Jauhar Fajrin

    2017-03-01

    Full Text Available This paper presents a comparison of theoretical and experimental deflection of a hybrid sandwich panel under four-point bending load. The paper initially presents few basic equations developed under three-point load, followed by development of model under four-point bending load and a comparative analysis between theoretical and experimental results. It was found that the proposed model for predicting the deflection of hybrid sandwich panels provided fair agreement with the experimental values. Most of the sandwich panels showed theoretical deflection values higher than the experimental values, which is desirable in the design. It was also noticed that the introduction of intermediate layer does not contribute much to reduce the deflection of sandwich panel as the main contributor for the total deflection was the shear deformation of the core that mostly determined by the geometric of the samples and the thickness of the core.

  15. Flutter Characteristic Study of Composite Sandwich Panel with Functionally Graded Foam Core

    Directory of Open Access Journals (Sweden)

    Peng Jin

    2016-01-01

    Full Text Available This paper attempts to investigate the flutter characteristic of sandwich panel composed of laminated facesheets and a functionally graded foam core. The macroscopic properties of the foam core change continuously along this direction parallel to the facesheet lamina. The model used in the study is a simple sandwich panel-wing clamped at the root, with three simple types of grading strategies for FGM core: (1 linear grading strategy in the chord-wise direction, (2 linear grading strategy in the span-wise direction, and (3 bilinear grading of properties of foam core across the panel. The results show that use of FGM core has the potential to increase the flutter speed of the sandwich panel. Finally, a minimum weight design of composite sandwich panel with lamination parameters of facesheet and density distribution of foam core as design variables is conducted using particle swarm optimization (PSO.

  16. Two dimensional dynamic analysis of sandwich plates with gradient foam cores

    Energy Technology Data Exchange (ETDEWEB)

    Mu, Lin; Xiao, Deng Bao; Zhao, Guiping [State Key Laboratory for Mechanical structure Strength and Vibration, School of AerospaceXi' an Jiaotong University, Xi' an (China); Cho, Chong Du [Dept. of Mechanical Engineering, Inha University, Inchon (Korea, Republic of)

    2016-09-15

    Present investigation is concerned about dynamic response of composite sandwich plates with the functionally gradient foam cores under time-dependent impulse. The analysis is based on a model of the gradient sandwich plate, in which the face sheets and the core adopt the Kirchhoff theory and a [2, 1]-order theory, respectively. The material properties of the gradient foam core vary continuously along the thickness direction. The gradient plate model is validated with the finite element code ABAQUS®. And the results show that the proposed model can predict well the free vibration of composite sandwich plates with gradient foam cores. The influences of gradient foam cores on the natural frequency, deflection and energy absorbing of the sandwich plates are also investigated.

  17. An Investigation on Low Velocity Impact Response of Multilayer Sandwich Composite Structures

    Directory of Open Access Journals (Sweden)

    S. Jedari Salami

    2013-01-01

    Full Text Available The effects of adding an extra layer within a sandwich panel and two different core types in top and bottom cores on low velocity impact loadings are studied experimentally in this paper. The panel includes polymer composite laminated sheets for faces and the internal laminated sheet called extra layer sheet, and two types of crushable foams are selected as the core material. Low velocity impact tests were carried out by drop hammer testing machine to the clamped multilayer sandwich panels with expanded polypropylene (EPP and polyurethane rigid (PUR in the top and bottom cores. Local displacement of the top core, contact force and deflection of the sandwich panel were obtained for different locations of the internal sheet; meanwhile the EPP and PUR were used in the top and bottom cores alternatively. It was found that the core material type has made significant role in improving the sandwich panel’s behavior compared with the effect of extra layer location.

  18. Detecting and identifying damage in sandwich polymer composite by using acoustic emission

    DEFF Research Database (Denmark)

    McGugan, M.; Sørensen, Bent F.; Østergaard, R.

    2006-01-01

    Acoustic emission is a useful monitoring tool for extracting extra information during mechanical testing of polymer composite sandwich materials. The study of fracture mechanics within test specimens extracted from wind turbine blade material ispresented. The contribution of the acoustic emission...

  19. Stress Distribution on Sandwich Structure with Triangular Grid Cores Suffered from Bending Load

    Directory of Open Access Journals (Sweden)

    Cui Xu

    2015-01-01

    Full Text Available Triangular grid reinforced by carbon fiber/epoxy (CF/EP was designed and manufactured. The sandwich structure was prepared by gluing the core and composite skins. The mechanical properties of the sandwich structure were investigated by the finite element analysis (FEA and three-point bending methods. The calculated bending stiffness and core shear stress were compared to the characteristics of a honeycomb sandwich structure. The results indicated that the triangular core ultimately failed under a bending load of 11000 N; the principal stress concentration was located at the loading region; and the cracks occurred on the interface top skin and triangular core. In addition, the ultimate stress bearing of the sandwich structure was 8828 N. The experimental results showed that the carbon fiber reinforced triangular grid was much stiffer and stronger than the honeycomb structure.

  20. Investigation of out of plane compressive strength of 3D printed sandwich composites

    Science.gov (United States)

    Dikshit, V.; Yap, Y. L.; Goh, G. D.; Yang, H.; Lim, J. C.; Qi, X.; Yeong, W. Y.; Wei, J.

    2016-07-01

    In this study, the 3D printing technique was utilized to manufacture the sandwich composites. Composite filament fabrication based 3D printer was used to print the face-sheet, and inkjet 3D printer was used to print the sandwich core structure. This work aims to study the compressive failure of the sandwich structure manufactured by using these two manufacturing techniques. Two different types of core structures were investigated with the same type of face-sheet configuration. The core structures were printed using photopolymer, while the face-sheet was made using nylon/glass. The out-of-plane compressive strength of the 3D printed sandwich composite structure has been examined in accordance with ASTM standards C365/C365-M and presented in this paper.

  1. Effect of varying geometrical parameters of trapezoidal corrugated-core sandwich structure

    Directory of Open Access Journals (Sweden)

    Zaid N.Z.M.

    2017-01-01

    Full Text Available Sandwich structure is an attractive alternative that increasingly used in the transportation and aerospace industry. Corrugated-core with trapezoidal shape allows enhancing the damage resistance to the sandwich structure, but on the other hand, it changes the structural response of the sandwich structure. The aim of this paper is to study the effect of varying geometrical parameters of trapezoidal corrugated-core sandwich structure under compression loading. The corrugated-core specimen was fabricated using press technique, following the shape of trapezoidal shape. Two different materials were used in the study, glass fibre reinforced plastic (GFRP and carbon fibre reinforced plastic (CFRP. The result shows that the mechanical properties of the core in compression loading are sensitive to the variation of a number of unit cells and the core thickness.

  2. Magnetic and Structural Properties in Co/Cu/Co Sandwiches with Ni and Cr Buffer Layers

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The magnetic and structural properties in Co/Cu/Co sandwiches with Ni and Cr buffer layers were investigated. It was found that the coercivity in Ni layer buffered samples decreases with increasing Ni layer thickness, while that in Cr layer buffered ones increases with increasing Cr layer thickness, leading to a large difference in field sensitivity of their giant magnetoresistance (GMR) properties. X-ray diffraction and high resolution transmission electron microscope images exhibited that there is a strong fcc (111) texture in the samples with Ni buffer layer. But there are only randomly oriented polycrystalline grains in Cr buffered sandwiches. According to atomic force microscope topography, the surface roughness of Cr buffered sandwiches is smaller than that of Ni buffered ones. It is demonstrated that buffer layer influences both magnetic and structural properties in Co/Cu/Co sandwiches as well as their GMR characteristics.

  3. Interfacial Crack Arrest in Sandwich Panels with Embedded Crack Stoppers Subjected to Fatigue Loading

    Science.gov (United States)

    Martakos, G.; Andreasen, J. H.; Berggreen, C.; Thomsen, O. T.

    2016-08-01

    A novel crack arresting device has been implemented in sandwich panels and tested using a special rig to apply out-of-plane loading on the sandwich panel face-sheets. Fatigue crack propagation was induced in the face-core interface of the sandwich panels which met the crack arrester. The effect of the embedded crack arresters was evaluated in terms of the achieved enhancement of the damage tolerance of the tested sandwich panels. A finite element (FE) model of the experimental setup was used for predicting propagation rates and direction of the crack growth. The FE simulation was based on the adoption of linear fracture mechanics and a fatigue propagation law (i.e. Paris law) to predict the residual fatigue life-time and behaviour of the test specimens. Finally, a comparison between the experimental results and the numerical simulations was made to validate the numerical predictions as well as the overall performance of the crack arresters.

  4. Wave propagation and absorption of sandwich beams containing interior dissipative multi-resonators.

    Science.gov (United States)

    Chen, H; Li, X P; Chen, Y Y; Huang, G L

    2017-04-01

    In this study, a sandwich beam with periodic multiple dissipative resonators in the sandwich core material is investigated for broadband wave mitigation and/or absorption. An analytical approach based on the transfer matrix method and Bloch theorem is developed for both infinite and finite sandwich structures. Wave attenuation constants are theoretically obtained to examine the effects of various system parameters on the position, width and wave attenuation performance of the band gaps. The wave absorption coefficient of the sandwich beam is quantitatively studied to distinguish wave attenuation mechanisms caused by reflection and absorption. It is numerically demonstrated that a transient blast-induced elastic wave with broadband frequencies can be almost completely mitigated or absorbed at a subwavelength scale. The results of this study could be used for developing new multifunctional composite materials to suppress impact-induced and/or blast-induced elastic waves which may cause severe local damage to engineering structures.

  5. Sandwich-type theorems for a class of integral operators with special properties

    Directory of Open Access Journals (Sweden)

    Parisa Hariri

    2014-02-01

    Full Text Available In the present paper, we prove subordination, superordination and sandwich-type properties of a certain integral operators for univalent functions on open unit disc, moreover the special behavior of this class is investigated.

  6. Effects of Core Softness and Bimodularity of Fibreglass Layers on Flexural Stiffness of Polymer Sandwich Structures

    Directory of Open Access Journals (Sweden)

    Šuba Oldřich

    2017-01-01

    Full Text Available This paper deals with the study of the flexural stiffness of the sandwich structures based on fibreglass and polymeric foams. The influence of geometrical and material parameters on the resulting effective flexural stiffness of the sandwich structure is being studied experimentally, analytically and by using FEM models. The effective modulus of elasticity of the sandwich-structured element is being studied and its theoretical and model dependencies on the flexibility of the foam core and bimodularity of the fibreglass layers are being investigated. The achieved results are compared with the experimentally observed values. This study shows that it is necessary to pay special attention to the issue of flexural stiffness of the walls when designing sandwich shell products in order to prevent possible failures in the practical applications of these types of structures.

  7. Prediction of Thermal and Elastic Properties of Honeycomb Sandwich Plate for Analysis of Thermal Deformation

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seok Min; Lee, Jang Il; Byun, Jae Ki; Choi, Young Don [Korea Univ., Seoul (Korea, Republic of)

    2014-04-15

    Thermal problems that are directly related to the lifetime of an electronic device are becoming increasingly important owing to the miniaturization of electronic devices. To solve thermal problems, it is essential to study thermal stability through thermal diffusion and insulation. A honeycomb sandwich plate has anisotropic thermal conductivity. To analyze the thermal deformation and temperature distribution of a system that employs a honeycomb sandwich plate, the thermal and elastic properties need to be determined. In this study, the thermal and elastic properties of a honeycomb sandwich plate, such as thermal conductivity, coefficient of thermal expansion, elastic modulus, Poisson's ratio, and shear modulus, are predicted. The properties of a honeycomb sandwich plate vary according to the hexagon size, thickness, and material properties.

  8. Fracture Testing of Honeycomb Core Sandwich Composites Using the DCB-UBM Test

    DEFF Research Database (Denmark)

    Saseendran, Vishnu; Berggreen, Christian; Carlsson, Leif A.

    2015-01-01

    of the face/core interface. In this paper, a novel test-rig exploiting the double cantilever beam-uneven bending moments (DCB-UBM) concept is used to determine the fracture toughness of aircraft type honeycomb core sandwich composites as a function of the phase angle (mode-mixity), within the framework......Face/core debonds in sandwich structures cause loss of integrity of sandwich structures. The debond problem in honeycomb core sandwich composites has not been widely studied. A suitable fracture approach coupled with experimental validation is paramount to determine the fracture resistance...... of Linear Elastic Fracture Mechanics (LEFM). The Double Cantilever Beam subjected to Uneven Bending Moments (DCB-UBM) test set-up, which was introduced by Sørensen.et.al [1], circumvents any dependency of the pre-crack length in calculation of Gc. The new test setup is based on rotary actuators which...

  9. Mid term results of total hip arthroplasty using polyethylene-ceramic composite (Sandwich liner

    Directory of Open Access Journals (Sweden)

    Tao Wang

    2016-01-01

    Conclusions: Our experience with the ceramic-polyethylene sandwich liner acetabular component has been disappointing because of the high rate of fracture and osteolyis. We have discontinued the use of this device and recommend the same.

  10. Penetration of sandwich plates with hybrid-cores under oblique ballistic impact

    Directory of Open Access Journals (Sweden)

    Changye Ni

    2014-01-01

    Full Text Available The oblique penetration performance of lightweight hybrid-cored sandwich plates are investigated numerically. To compose the hybrid-core, ceramic prisms are inserted into pyramidal metal lattice trusses and fixed using epoxy resin. Three-dimensional finite element simulations are carried out for the hybridcored sandwich impacted at 15°, 30°, 45°, and 60° obliquity by a hemispherical projectile. The ballistic limit, the energy absorbed by the constituting elements, and the critical oblique angle are quantified. The physical mechanisms underlying the failure and the influence of fundamental system parameters are explored. The angle of obliquity is found to have significant influence on the ballistic trajectory and erosion of the projectile, thus it is important for the impact response and penetration resistance of the sandwich. For oblique angles equal to or larger than 45°, the projectile moves mainly horizontally and can not effectively penetrate across the sandwich.

  11. Development of a sandwiched microarray platform for studying the interactions of antibiotics with Staphylococcus aureus.

    Science.gov (United States)

    Liu, Xia; Lei, Zhen; Liu, Dianjun; Wang, Zhenxin

    2016-04-21

    It still confronts an outstanding challenge to screen efficient antibacterial drugs from millions of potential antibiotic candidates. In this regard, a sandwiched microarray platform has been developed to culture live bacteria and carry out high-throughput screening antibacterial drugs. The optimized lectin-hydrogel microarray can be used as an efficient bacterial capturing and culturing platform, which is beneficial to identify spots and collect data. At the same time, a matching drug-laden polyacrylamide microarray with Luria-Bertani (LB) culture medium can be generated automatically and accurately by using a standard non-contacting procedure. A large number of microscale culture chambers (more than 100 individual samples) between two microarrays can be formed by linking two aligned hydrogel spots using LB culture medium, where live bacteria can be co-cultured with drug candidates. Using Staphylococcus aureus (S. aureus) and four well-known antibiotics (amoxicillin, vancomycin, streptomycin and chloramphenicol) as model system, the MIC (minimum inhibitory concentration) values of the antibiotics can be determined by the drug induced change of bacterial growth, and the results demonstrate that the MIC values of amoxicillin, vancomycin and streptomycin are 1.7 μg mL(-1), 3.3 μg mL(-1) and 10.3 μg mL(-1), respectively.

  12. Post-Buckling Analysis of Curved Honeycomb Sandwich Panels Containing Interfacial Disbonds

    Science.gov (United States)

    Pineda, Evan J.; Bednarcyk, Brett A.; Krivanek, Thomas K.

    2016-01-01

    A numerical study on the effect of facesheet-core disbonds on the post-buckling response of curved honeycomb sandwich panels is presented herein. This work was conducted as part of the development of a damage tolerance plan for the next-generation Space Launch System heavy lift launch vehicle payload fairing. As such, the study utilized full-scale fairing barrel segments as the structure of interest. The panels were composed of carbon fiber reinforced polymer facesheets and aluminum honeycomb core. The panels were analyzed numerically using the finite element method incorporating geometric nonlinearity. In a predetermined circular region, facesheet and core nodes were detached to simulate a disbond, between the outer mold line facesheet and honeycomb core, induced via low-speed impact. Surface-to-surface contact in the disbonded region was invoked to prevent interpenetration of the facesheet and core elements and obtain realistic stresses in the core. The diameter of this disbonded region was varied and the effect of the size of the disbond on the post-buckling response was observed. Significant changes in the slope of the edge load-deflection response were used to determine the onset of global buckling and corresponding buckling load. Finally, several studies were conducted to determine the sensitivity of the numerical predictions to refinement in the finite element mesh.

  13. A Sandwich HIV p24 Amperometric Immunosensor Based on a Direct Gold Electroplating-Modified Electrode

    Directory of Open Access Journals (Sweden)

    Ning Gan

    2012-05-01

    Full Text Available Acquired immune deficiency syndrome (AIDS is a severe communicable immune deficiency disease caused by the human immune deficiency virus (HIV. The analysis laboratory diagnosis of HIV infection is a crucial aspect of controlling AIDS. The p24 antigen, the HIV-1 capsid protein, is of considerable diagnostic interest because it is detectable several days earlier than host-generated HIV antibodies following HIV exposure. We present herein a new sandwich HIV p24 immunosensor based on directly electroplating an electrode surface with gold nanoparticles using chronoamperometry, which greatly increased the conductivity and reversibility of the electrode. Under optimum conditions, the electrochemical signal showed a linear relationship with the concentration of p24, ranging from 0.01 ng/mL to 100 ng/mL (R > 0.99, and the detection limit was 0.008 ng/mL. Compared with ELISA, this method increased the sensitivity by more than two orders of magnitude (the sensitivity of ELISA for p24 is about 1 ng/mL. This immunosensor may be broadly applied to clinical samples, being distinguished by its ease of use, mild reaction conditions, guaranteed reproducibility, and good anti-interference ability.

  14. Study on folds of monolayer sandwiched-in different thickness terranes

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The paper discussed the limitation of ‘Dominant wavelength theory’. The theoretical model and nonhomogeneous differential equation of fold and deformation of a monolayer sandwiched-in limited and different thickness terranes are proposed by using mechanics of elasticity. In addition, the ′Dominant wavelength theory’ is proved by the experimental folding in elastic materials. The folds of a monolayer sandwiched-in limited and different thickness terranes are studied inside and are explored in the field.

  15. The primitive matrices of sandwich semigroups of generalized circulant Boolean matrices

    Institute of Scientific and Technical Information of China (English)

    LIU Jian-ping; CHEN Jin-song

    2013-01-01

    Let Gn(C) be the sandwich semigroup of generalized circulant Boolean matrices with the sandwich matrix C and GC (Jn) the set of all primitive matrices in Gn(C). In this paper, some necessary and suffi cient conditions for A in the semigroup Gn(C) to be primitive are given. We also show that GC (Jn) is a subsemigroup of Gn(C).

  16. Geometrical parameters influence on behavior of the sandwich plates with corrugated core

    Directory of Open Access Journals (Sweden)

    Djoković Jelena M.

    2016-01-01

    Full Text Available The influence of geometric parameters on behavior and stiffness of sandwich plates with corrugated core is considered in this paper. The following parameters were analyzed: ratio of core sheet and facing sheet thickness and the ratio of the core’s pitch to the core’s depth, as well as the corrugation angle. It is shown that changes of these parameters can contribute to increase or decrease of the corrugated sandwich plate stiffness.

  17. Assessment of foam fracture in sandwich beams using thermoelastic stress analysis

    DEFF Research Database (Denmark)

    Dulieu-Barton, J.M.; Berggreen, Christian; Mettemberg, C.

    2009-01-01

    Thermoelastic Stress Analysis (TSA) has been well established for determining crack-tip parameters in metallic materials. This paper examines its ability to determine accurately the crack-tip parameters for PVC foam used in sandwich structures.......Thermoelastic Stress Analysis (TSA) has been well established for determining crack-tip parameters in metallic materials. This paper examines its ability to determine accurately the crack-tip parameters for PVC foam used in sandwich structures....

  18. Polyisocyanurate systems for insulating and sandwich elements; Polyisocyanurat-Systeme fuer Daemm- und Sandwichelemente

    Energy Technology Data Exchange (ETDEWEB)

    Malotki, P. von [Elastogran GmbH, Lemfoerde (Germany)

    2000-07-01

    PUR rigid foam plates are laminated with flexible Al films, paper or glass non-wovens, or may be processed into sandwich elements with metallic top-layers via coil-coating. Dependence of heat insulation efficiency, dimensional stability and fire behavior of the foam on chemical composition and the blowing agents is considered and compared with polyisocyanurate foams. Recipes for the production of PIR heat insulation elements and sandwich elements are given.

  19. Multiscale Modeling Methods for Analysis of Failure Modes in Foldcore Sandwich Panels

    Science.gov (United States)

    Sturm, R.; Schatrow, P.; Klett, Y.

    2015-12-01

    The paper presents an homogenised core model suitable for use in the analysis of fuselage sandwich panels with folded composite cores under combined loading conditions. Within a multiscale numerical design process a failure criterion was derived for describing the macroscopic behaviour of folded cores under combined loading using a detailed foldcore micromodel. The multiscale modelling method was validated by simulation of combined compression/bending failure of foldcore sandwich panels.

  20. EXPERIMENTAL ANALYSIS OF FLEXURAL STRENGTH ON GLASS FIBER SANDWICH COMPOSITE BY VARYING Z-PINS PITCHES

    OpenAIRE

    Pravin*, Jeyapratha

    2016-01-01

    This paper ambit to evaluate the flexural strength of glass fiber sandwich panels with varying z-pins pitches. Failure of sandwich panel are delamination and core shear, to minimize the crack propagation, pins are inserted in z-direction, by varying pitches through its thickness. During the insertion of pin, may cause the material some damage. Despite the damage, flexural property does not affected due interpolation of pins. Although the experiment were pull out with a phenomenal results of z...

  1. Mechanical behavior of a sandwich with corrugated GRP core: numerical modeling and experimental validation

    OpenAIRE

    Tumino, D; T. Ingrassia; V. Nigrelli; G. Pitarresi; V. Urso Miano

    2014-01-01

    In this work the mechanical behaviour of a core reinforced composite sandwich structure is studied. The sandwich employs a Glass Reinforced Polymer (GRP) orthotropic material for both the two external skins and the inner core web. In particular, the core is designed in order to cooperate with the GRP skins in membrane and flexural properties by means of the addition of a corrugated laminate into the foam core. An analytical model has been developed to replace a unit cell of this s...

  2. Analysis and Testing of a Tapered End Connection for Laser Welded Steel Sandwich Panels

    Science.gov (United States)

    2009-08-15

    1951, Elastic Constants for Corrugated Core Sandwich Plates. Technical Note 2289. National Aeronautics and Space Administration ( NASA ). 19. Lok...Assoc. Professor of Mechanical Engineering, University of Maine (Co-I) Grant No: N00014-05-1 -0735 ATS subcontract No: UM-591 Report No. C-2004-015...RPT-04 August 15,2009 20090925154 ABSTRACT This report summarize the analysis and cyclic testing of a laser welded steel sandwich panel end

  3. Structural performance of complex core systems for FRP-balsa composite sandwich bridge decks

    OpenAIRE

    Osei-Antwi, Michael

    2014-01-01

    Based on current fiber-reinforced polymer (FRP) composite construction principles, FRP decks fall into two categories: pultruded decks and sandwich decks. Sandwich decks comprise face sheets and either honeycombs or foams reinforced with internal FRP webs for shear resistance. The honeycomb structure and the webs cause debonding between the upper face sheets and the core due to the uneven support of the former. An alternative material that has high shear capacity and can provide uniform ...

  4. Numerical analysis of sandwich beam with corrugated core under three-point bending

    Energy Technology Data Exchange (ETDEWEB)

    Wittenbeck, Leszek [Poznan University of Technology, Institute of Mathematics Piotrowo Street No. 5, 60-965 Poznan (Poland); Grygorowicz, Magdalena; Paczos, Piotr [Poznan University of Technology, Institute of Applied Mechanics Jana Pawla IIStreet No. 24, 60-965 Poznan (Poland)

    2015-03-10

    The strength problem of sandwich beam with corrugated core under three-point bending is presented.The beam are made of steel and formed by three mutually orthogonal corrugated layers. The finite element analysis (FEA) of the sandwich beam is performed with the use of the FEM system - ABAQUS. The relationship between the applied load and deflection in three-point bending is considered.

  5. Influence of weld stiffness on buckling strength of laser-welded web-core sandwich plates

    OpenAIRE

    Jelovica, Jasmin; Romanoff, Jani; Ehlers, Sören; Varsta, Petri

    2012-01-01

    This paper investigates the influence of weld rotation stiffness on the global bifurcation buckling strength of laser-welded web-core sandwich plates. The study is carried out using two methods, the first is the equivalent single-layer theory approach solved analytically for simply supported plates and numerically for clamped plates. First-order shear deformation theory is used. The second method is the three-dimensional model of a sandwich plate solved with finite element method. Both approa...

  6. Sandwiched zinc-finger nucleases demonstrating higher homologous recombination rates than conventional zinc-finger nucleases in mammalian cells.

    Science.gov (United States)

    Mori, Tomoaki; Mori, Koichi; Tobimatsu, Takamasa; Sera, Takashi

    2014-02-01

    We previously reported that our sandwiched zinc-finger nucleases (ZFNs), in which a DNA cleavage domain is inserted between two artificial zinc-finger proteins, cleave their target DNA much more efficiently than conventional ZFNs in vitro. In the present study, we compared DNA cleaving efficiencies of a sandwiched ZFN with those of its corresponding conventional ZFN in mammalian cells. Using a plasmid-based single-strand annealing reporter assay in HEK293 cells, we confirmed that the sandwiched ZFN induced homologous recombination more efficiently than the conventional ZFN; reporter activation by the sandwiched ZFN was more than eight times that of the conventional one. Western blot analysis showed that the sandwiched ZFN was expressed less frequently than the conventional ZFN, indicating that the greater DNA-cleaving activity of the sandwiched ZFN was not due to higher expression of the sandwiched ZFN. Furthermore, an MTT assay demonstrated that the sandwiched ZFN did not have any significant cytotoxicity under the DNA-cleavage conditions. Thus, because our sandwiched ZFN cleaved more efficiently than its corresponding conventional ZFN in HEK293 cells as well as in vitro, sandwiched ZFNs are expected to serve as an effective molecular tool for genome editing in living cells.

  7. Parametric study on nonlinear vibration of composite truss core sandwich plate with internal resonance

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Jia Nen; Liu, Jun [Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System, Tianjin University of Technology, Tianjin (China); Zhang, Wei; Yao, Ming Hui [College of Mechanical Engineering, Beijing University of Technology, Beijing (China); Sun, Min [School of Science, Tianjin Chengjian University, Tianjin (China)

    2016-09-15

    Nonlinear vibrations of carbon fiber reinforced composite sandwich plate with pyramidal truss core are investigated. The governing equation of motion for the sandwich plate is derived by using a Zig-Zag theory under consideration of geometrically nonlinear. The natural frequencies of sandwich plates with different dimensions are calculated and compared with those obtained from the classic laminated plate theory and Reddy's third-order shear deformation plate theory. The frequency responses and waveforms of the sandwich plate when 1:3 internal resonance occurs are obtained, and the characteristics of the internal resonance are discussed. The influences of layer number of face sheet, strut radius, core height and inclination angle on the nonlinear responses of the sandwich plate are analyzed. The results demonstrate that the strut radius and inclination angle mainly affect the resonance frequency band of the sandwich plate, and the layer number and core height not only influence the resonance frequency band but also significantly affect the response amplitude.

  8. An Analysis of Nondestructive Evaluation Techniques for Polymer Matrix Composite Sandwich Materials

    Science.gov (United States)

    Cosgriff, Laura M.; Roberts, Gary D.; Binienda, Wieslaw K.; Zheng, Diahua; Averbeck, Timothy; Roth, Donald J.; Jeanneau, Philippe

    2006-01-01

    Structural sandwich materials composed of triaxially braided polymer matrix composite material face sheets sandwiching a foam core are being utilized for applications including aerospace components and recreational equipment. Since full scale components are being made from these sandwich materials, it is necessary to develop proper inspection practices for their manufacture and in-field use. Specifically, nondestructive evaluation (NDE) techniques need to be investigated for analysis of components made from these materials. Hockey blades made from sandwich materials and a flat sandwich sample were examined with multiple NDE techniques including thermographic, radiographic, and shearographic methods to investigate damage induced in the blades and flat panel components. Hockey blades used during actual play and a flat polymer matrix composite sandwich sample with damage inserted into the foam core were investigated with each technique. NDE images from the samples were presented and discussed. Structural elements within each blade were observed with radiographic imaging. Damaged regions and some structural elements of the hockey blades were identified with thermographic imaging. Structural elements, damaged regions, and other material variations were detected in the hockey blades with shearography. Each technique s advantages and disadvantages were considered in making recommendations for inspection of components made from these types of materials.

  9. Development of a finite element model for the simulation of parabolic impact of sandwich panels

    Science.gov (United States)

    Ram Ramakrishnan, Karthik; Guérard, Sandra; Mahéo, Laurent; Shankar, Krishna; Viot, Philippe

    2015-09-01

    Sandwich panels are lightweight structures of two thin high strength facesheets bonded to either side of a thick low density core such as foams and honeycombs. It is necessary to study the impact response of sandwich structures in order to ensure the reliability and safety of these structures. The response of sandwich panels to impact loading is usually studied for impact at normal angle of incidence. In real engineering situations, the structures are more frequently loaded at some oblique angle or with a complex trajectory. It is easy to carry out normal impact tests using devices like the drop tower, but impacts at oblique angles are difficult to characterise experimentally. A tri-dimensional impact device called Hexapod has been developed to experimentally study the impact loading of sandwich plates with a parabolic trajectory. The Hexapod is a modified Gough-Stewart platform that can be moved independently in the six degrees of freedom, corresponding to three translation axes and three rotation axes. In this paper, an approach for modelling the parabolic impact of sandwich structures with thin metallic facesheets and polymer foam core using commercial finite element code LS-DYNA software is presented. The results of the FE model of sandwich panels are compared with experimental data in terms of the time history of vertical and horizontal components of force. A comparison of the strain history obtained from Digital Image Correlation and LS-Dyna model are also presented.

  10. Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins

    Directory of Open Access Journals (Sweden)

    Zulzamri Salleh

    2016-12-01

    Full Text Available Sandwich composites or sandwich panels have been widely used as potential materials or building structures and are regarded as a lightweight material for marine applications. In particular, the mechanical properties, such as the compressive, tensile and flexural behaviour, of sandwich composites formed from glass fibre sheets used as the skin and glass microballoon/vinyl ester as the syntactic foam core were investigated in this report. This syntactic foam core is sandwiched between unidirectional glass fibre reinforced plastic (GFRP using vinyl ester resins to build high performance sandwich panels. The results show that the compressive and tensile strengths decrease when the glass microballoon content is increased in syntactic foam core of sandwich panels. Moreover, compressive modulus is also found to be decreased, and there is no trend for tensile modulus. Meanwhile, the flexural stiffness and effective flexural stiffness for edgewise position have a higher bending as 50% and 60%, respectively. Furthermore, the results indicated that the glass microballoon mixed in a vinyl ester should be controlled to obtain a good combination of the tensile, compressive and flexural strength properties.

  11. Mechanical properties characterization of composite sandwich materials intended for space antenna applications

    Science.gov (United States)

    Bowles, Kenneth J.; Vannucci, Raymond D.

    1986-01-01

    The composite materials proposed for use in the Advanced Communications Technology Satellite (ACTS) Program contains a new, high modulus graphite fiber as the reinforcement. A study was conducted to measure certain mechanical properties of the new fiber-reinforced material as well as of a composite-faced aluminum honeycomb sandwich structure. Properties were measured at -157, 22, and 121 C. Complete characterization of this material was not intended. Longitudinal tensile, picture-frame shear, short-beam shear, and flexural tests were performed on specimens of the composite face-sheet materials. Unidirectional, cross-plied, and quasi-isotropic fiber composite ply layup designs were fabricated and tested. These designs had been studied by using NASA's Integrated Composite Analyzer (ICAN) computer program. Flexural tests were conducted on (+/- 60/0 deg) sub s composite-faced sandwich structure material. Resistance strain gages were used to measure strains in the tensile, picture-frame, and sandwich flexural tests. The sandwich flexural strength was limited by the core strength at -157 and 22 C. The adhesive bond strength was the limiting factor at 121 C. Adhesive mechanical properties are reflected in sandwich structure flexural properties when the span-to-depth ratio is great enough to allow a significant shear effect on the load-deflection behavior of the sandwich beam. Most measured properties agreed satisfactorily with the properties predicted by ICAN.

  12. Evaluation and selection of indirect ELISA and sandwich ELISA kits for anti-HCV detection

    Directory of Open Access Journals (Sweden)

    LI Yongzhen

    2014-10-01

    Full Text Available ObjectiveTo compare the sensitivity and specificity between indirect enzyme-linked immunosorbent assay (ELISA and double-antibody sandwich ELISA kits produced in China and to select the best ELISA kit. MethodsSamples for evaluation included 60 serum plates and 40 serum samples positive or weakly positive for antibody to hepatitis C virus (anti-HCV which were confirmed by recombinant immunoblot assay. These samples were tested with a sandwich ELISA kit and three indirect ELISA kits, all of which were produced in China. Comparison between ELISA kits was made by paired chi-square test; comparison of false negative rate was made by R×C contingency table test. ResultsThe sensitivities of three indirect ELISA kits and a sandwich ELISA kit were 90.2%, 78.0%, 95.1%, and 97.6%, respectively, and the specificities were 78.1%, 72.6%, 94.1%, and 100%, respectively. The sandwich ELISA kit had a 4-8 times higher sensitivity than indirect ELISA kits. The R×C contingency table test revealed significant differences in false negative rate between ELISA kits and combinations of ELISA kits (χ2=29.898, P<0.05. ConclusionSandwich ELISA kit has higher sensitivity and specificity than indirect ELISA kits. Combined use of sandwich ELISA and indirect ELISA kits can significantly reduce the false negative rate and effectively prevent missed anti-HCV detection.

  13. Development of a finite element model for the simulation of parabolic impact of sandwich panels

    Directory of Open Access Journals (Sweden)

    Ramakrishnan Karthik Ram

    2015-01-01

    Full Text Available Sandwich panels are lightweight structures of two thin high strength facesheets bonded to either side of a thick low density core such as foams and honeycombs. It is necessary to study the impact response of sandwich structures in order to ensure the reliability and safety of these structures. The response of sandwich panels to impact loading is usually studied for impact at normal angle of incidence. In real engineering situations, the structures are more frequently loaded at some oblique angle or with a complex trajectory. It is easy to carry out normal impact tests using devices like the drop tower, but impacts at oblique angles are difficult to characterise experimentally. A tri-dimensional impact device called Hexapod has been developed to experimentally study the impact loading of sandwich plates with a parabolic trajectory. The Hexapod is a modified Gough-Stewart platform that can be moved independently in the six degrees of freedom, corresponding to three translation axes and three rotation axes. In this paper, an approach for modelling the parabolic impact of sandwich structures with thin metallic facesheets and polymer foam core using commercial finite element code LS-DYNA software is presented. The results of the FE model of sandwich panels are compared with experimental data in terms of the time history of vertical and horizontal components of force. A comparison of the strain history obtained from Digital Image Correlation and LS-Dyna model are also presented.

  14. Failure Predictions of Out-of-Autoclave Sandwich Joints with Delaminations Under Flexure Loads

    Science.gov (United States)

    Nordendale, Nikolas A.; Goyal, Vinay K.; Lundgren, Eric C.; Patel, Dhruv N.; Farrokh, Babak; Jones, Justin; Fischetti, Grace; Segal, Kenneth N.

    2015-01-01

    An analysis and a test program was conducted to investigate the damage tolerance of composite sandwich joints. The joints contained a single circular delamination between the face-sheet and the doubler. The coupons were fabricated through out-of-autoclave (OOA) processes, a technology NASA is investigating for joining large composite sections. The four-point bend flexure test was used to induce compression loading into the side of the joint where the delamination was placed. The compression side was chosen since it tends to be one of the most critical loads in launch vehicles. Autoclave cure was used to manufacture the composite sandwich sections, while the doubler was co-bonded onto the sandwich face-sheet using an OOA process after sandwich panels were cured. A building block approach was adopted to characterize the mechanical properties of the joint material, including the fracture toughness between the doubler and face-sheet. Twelve four-point-bend samples were tested, six in the sandwich core ribbon orientation and six in sandwich core cross-ribbon direction. Analysis predicted failure initiation and propagation at the pre-delaminated location, consistent with experimental observations. A building block approach using fracture analyses methods predicted failure loads in close agreement with tests. This investigation demonstrated a small strength reduction due to a flaw of significant size compared to the width of the sample. Therefore, concerns of bonding an OOA material to an in-autoclave material was mitigated for the geometries, materials, and load configurations considered.

  15. PENGGUNAAN SANDWICH PLATE SYSTEM (SPS PADA KONSTRUKSI INNER BOTTOM

    Directory of Open Access Journals (Sweden)

    Ahmad Baidowi

    2015-06-01

    Full Text Available Perkembangan teknologi yang semakin maju memberikan alternatif-alternatif dalam memperbaiki berbagai bentuk sistem, termasuk di dalamnya konstruksi struktur kapal. Latar belakang dari penelitian ini adalah pada permasalahan kebutuhan material ringan pada kapal, kecepatan proses produksi, penyederhanaan konstruksi dan biaya perawatan kapal yang rendah. Penggunaan material ringan Sandwich Plate System (SPS menjadi salah satu jawaban dari permasalahan-permasalahan tersebut, penggunaan SPS dapat menyederhanakan bentuk dari konstruksi kapal dengan menghilangkan penegar inner bottom longitudinal dan mampu mengurangi Light Weight Tonnase (LWT. Artikel ini membahas perbandingan pola distribusi tegangan dan deformasi pada konstruksi bottom yang menggunakan SPS dan baja AH36, selain dari itu juga mengetahui seberapa besar pengurangan LWT yang dihasilkan untuk meningkatkan Payload kapal. Analisa dilakukan dengan simulasi numerik berdasarkan FEM pada konstruksi inner bottom dengan pembebanan muatan. Dari hasil simulasi didapatkan besar tegangan maksimal untuk material baja AH36 sebesar 226 Mpa dengan menggunakan penegar, sedangkan konstuksi dengan material SPS tegangan maksimal yang dihasilkan sebesar 221 Mpa tanpa penggunaan penegar, dengan deformasi maksimal untuk AH36 dan SPS yaitu 77 mm yang terjadi pada bagian tengah blok konstruksi inner bottom. Dengan hilangnya penegar berat konstruksi berkurang sebesar 13,05% dari penggunaan material baja AH36 sehingga memberikan peningkatan payload sebesar 13,05%. Simulasi penelitian dilakukan pada kapal Bulk Carrier (BC.

  16. Piezoelectric performance of fluor polymer sandwiches with different void structures

    Science.gov (United States)

    Lou, Kexing; Zhang, Xiaoqing; Xia, Zhongfu

    2012-06-01

    Film sandwiches, consisting of two outer layers of fluoroethylenepropylene and one middle layer of patterned porous polytetrafluoroethylene, were prepared by patterning and fusion bonding. Contact charging was conducted to render the films piezoelectric. The critical voltage to trigger air breakdown in the inner voids in the fabricated films was investigated. The piezoelectric d 33 coefficients were measured employing the quasistatic method and dielectric resonance spectrum. The results show that the critical voltage for air breakdown in the inner voids is associated with the void microstructure of the films. For the films with patterning factors of 0%, 25% and 44%, the critical values are 300, 230 and 230 kV/cm, respectively. With an increase in the patterning factor, both the piezoelectric d 33 coefficients determined from the dielectric resonance spectra and those determined from quasistatic measurements increase, which might be due to a decrease in Young's modulus for the films. The nonlinearity of d 33 becomes increasingly obvious as the patterning factor increases.

  17. Sandwiched structural panel having a bi-directional core structure

    Science.gov (United States)

    Weddendorf, Bruce (Inventor)

    1995-01-01

    A structural panel assembly has a bi-directional core structure sandwiched between and secured to a pair of outer side wall members. The core structure is formed from first and second perpendicular series of elongated strip members having crenelated configurations. The strip members in the first series thereof are transversely interwoven with the strip members in the second series thereof in a manner such that crest portions of the strip members in the first series overlie and oppose trough portions of the strip members in the second series, and trough portions of the strip members in the first series underlie and oppose crest portions of the strip members in the second series. The crest portions of all of the strip members lie generally in a first plane and are secured to the inner side of one of the panel assembly outer side walls, and the trough portions of all of the strip members lie generally in a second plane and are secured to the inner side of the other panel assembly outer side wall.

  18. Efficient transport of droplet sandwiched between saw-tooth plates.

    Science.gov (United States)

    Wang, Liya; Wu, Hengan; Wang, Fengchao

    2016-01-15

    The transport of droplet sandwiched between smooth and saw-tooth plates was investigated using molecular dynamics method. The repeated opening and closing of the plates result in sequential stretching and squeezing of the droplet, which provide the driving force. The asymmetrical saw tooth obstructs the backward motion of the droplet, and gives rise to a net forward displacement of the droplet in every opening and closing cycle. This unidirectional motion facilitates the efficient droplet transport, which is referred to as the ratchet-like effect in this work. Our simulations also reveal that the influence of the surface wettability on the droplet transport is different for saw-tooth and smooth plates. Droplet transport efficiency exhibits monotonic decrease with the increase of the solid-liquid interactions for saw-tooth plates. While for smooth plates, unidirectional droplet movement was only observed for certain solid-liquid interactions. Taken together these simulation results and theoretical analysis, we demonstrate that hydrophobic saw-tooth plates can improve the transport efficiency significantly. These findings not only enhance our understanding of the droplet transport from atomistic scale, but also are beneficial to practical applications in designing of micro- and nano-fluidic systems.

  19. Magnetic ordering in Fe/Co sandwiches on Cu(100).

    Science.gov (United States)

    Razee, S S A; Staunton, J B; Szunyogh, L

    2009-07-01

    We investigate magnetic correlations and local magnetic moments at finite temperatures of some Fe and Co multilayers on Cu(100) substrates, such as Co(m)Fe(n)Co(m)/Cu(100) and Fe(m)Co(n)Fe(m)/Cu(100). We use an ab initio mean-field theory of magnetic fluctuations for layered materials based on the first-principles local spin-density functional theory implemented through the screened Korringa-Kohn-Rostoker method. We find that the presence of Fe layers in the neighbourhood of a Co layer always leads to a reduction in the magnetic moment of the Co atoms, whereas that of the Fe atoms is enhanced. Of particular interest is the lack of local moment formation on the single fcc-Co layer sandwiched between two fcc-Fe layers. However, a Co layer completely immersed in a Cu environment remains ferromagnetic. The Curie temperature of the Co(m)Fe(n)Co(m)/Cu(100) system oscillates as the Fe layer thickness is increased whereas that of the Fe(m)Co(n)Fe(m)/Cu(100) system increases almost monotonically with Co layer thickness.

  20. Numerical investigation of blanking for metal polymer sandwich sheets

    Directory of Open Access Journals (Sweden)

    Gutknecht Florian

    2016-01-01

    Full Text Available Metal polymer sandwich sheets consist of materials with drastically different mechanical properties. Due to this fact and because of high local gradients in the cutting zone during the blanking process, traditional process strategies and empirical knowledge are difficult to apply. A finite-element simulation of the shear cutting process is used to predict the necessary force and the geometry of the cutting surface. A fully-coupled ductile damage model is used for the description of the material behaviour. This model considers the influence of shear and compression-dominated stress states on the initiation of damage. Experimental tensile and compression test data is used for the identification of material parameters. The results of the blanking simulation are compared with experimental data. Furthermore, the evolution of the stress state is analysed to gain understanding of the underlying physics. Finally this model enables the prediction of core compression and other quantities such as the acting stresses and corresponding triaxilities, which provide valuable information for the development of analytical models.