WorldWideScience

Sample records for sand springs petrochem

  1. 75 FR 11938 - Gerdau Ameristeel, Sand Springs, OK; Notice of Termination of Investigation

    Science.gov (United States)

    2010-03-12

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Gerdau Ameristeel, Sand Springs, OK; Notice of Termination of... Ameristeel, Sand Springs, Oklahoma. The petitioner has requested that the petition be withdrawn....

  2. Entomological study of sand flies (Diptera:Psychodidae:Phlebotominae) in Asalouyeh, the heartland of an Iranian petrochemical industry

    Institute of Scientific and Technical Information of China (English)

    Hamzeh Alipour; Hossien Darabi; Tahere Dabbaghmanesh; Mehdi Bonyani

    2014-01-01

    Objective: To investigate the fauna and seasonal activity of different species of sand flies (Diptera:Psychodidae: Phlebotominae) in Asalouyeh, the heartland of an Iranian petrochemical industry, Southern Iran, as a oil rich district. Sand flies are the vectors of at least three different kinds of disease, the most important of which is leishmaniasis, and it is a major public health problem in Iran with increased annual occurrence of clinical episodes.Methods:cleared in puris medium and identified morphologically, twice a month from April to March 2008.Results:A total of 3 497 sand flies of rural regions were collected by sticky traps fixed, and Sinton, 1928, Phlebotomus papatasi Scopoli, 1910, Phlebotomus bergeroti Parrot and Phlebotomus sergenti Parrot) and one of genus Sergentomyia (Sergentomyia tiberiadis Alder, Theodor & Lourie, 1930). The most prevalent species was Phlebotomus papatasi, presented 56.4% of the identified flies. The others were Phlebotomus sergenti (22.5%), Phlebotomus alexandri (4.5%), Phlebotomusbergeroti Predominant species included four of genus Phlebotomus (Phlebotomus alexandri than that of males (32%). The abundance of sand flies represented two peaks of activity; one in early May and the other one in the first half of September in the region. (12%) and Sergentomyia tiberiadis (5%) as well. The percentage of females (68%) was more Conclusion: Phlebotomus papatasi is the probable vector of zoonotic cutaneous leishmaniasis in the region. Further molecular studies are needed to determine the definite vector of the region.

  3. Petrochemical variation of Topopah Spring tuff matrix with depth (stratigraphic level), drill hole USW G-4, Yucca Mountain, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    Byers, F.M. Jr.

    1985-12-01

    This study describes and interprets petrochemical variation of the matrix (excluding fractures and large gas cavities) of the Topopah Spring Member of the Paintbrush Tuff. This tuff includes the candidate host rock for a high-level nuclear waste repository at Yucca Mountain on the Nevada Test Site. Cored hole USW G-4, near the site of a potential exploratory shaft at Yucca Mountain, penetrated 359.4 m (1179 ft) of the member within the unsaturated zone. This study shows that petrographic textures and chemistry of the matrix vary systematically within recognizable lithologic subunits related to crystallization (cooling) zones, welding (compaction) zones, and compositional zones (rhyolite versus quartz latite). The methods used for this study include petrographic modal thin section analysis using an automated counter and electron microprobe analysis of the groundmass. Distinctive textural categories are defined, and they can be ranked from finest to coarsest as vitrophyre (glass), cryptocrystalline groundmass, spherulites, granophyre, lithic fragments, and phenocrysts. The two main groundmass compositions are also defined: rhyolite high silica) and quartz latite. The value of these petrochemical studies lies in providing microscopic criteria for recognizing the zonal subunits where they may have greatly limited exposure, as in mined drifts and in core from horizontal drill holes. For example, the lower nonlithophysal zone can be distinguished microscopically from the middle nonlithophysal zone by (1) degree of compaction, (2) amount of quartz, and (3) amount of lithic fragments. The variability between these textural categories should also be considered in designing physical and chemical tests of the Topopah Spring.

  4. Growth of legume and nonlegume catch crops and residual-N effects in spring barley on coarse sand

    DEFF Research Database (Denmark)

    Askegaard, Margrethe; Eriksen, Jørgen

    2007-01-01

    Askegaard, M. and Eriksen, E. 2007. Growth of legume and nonlegume catch crops and residual-N effects in spring barley on coarse sand. J. Plant Nutrition and Soil Science, 170, 733-780.......Askegaard, M. and Eriksen, E. 2007. Growth of legume and nonlegume catch crops and residual-N effects in spring barley on coarse sand. J. Plant Nutrition and Soil Science, 170, 733-780....

  5. Investigation on the Degradation of Natural Heritage of Singing Sand Mountain and Crescent Moon Spring at Dunhuang City, China

    Institute of Scientific and Technical Information of China (English)

    Dong Jihong

    2007-01-01

    The main purpose of this study is to put forward a reasonable idea of the general protection for Singing Sand Mountain and Crescent Moon Spring,a rare and unique desert wonder,and of sustainable tourism development based on the research on the ecological environment around.Methods of documentation,case study and comparison were employed.Finally,aiming at solving the problems of natural environment and those existing after the exploitation of Singing Sand Mountain and Crescent Moon Spring the author puts forward three measures;the comprehensive treatment for Crescent Moon Spring(broadening resources of water and reducing expenditures,checking the decreasing depth of Crescent Moon Spring,and improving the geographical envkonment),the general protection envisions for Singing Sand Mountain and Crescent Moon Spring and establishing a dynamic monitoring and early-warning system of regional ecosystem.

  6. Potential impacts to perennial springs from tar sand mining, processing, and disposal on the Tavaputs Plateau, Utah, USA

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, William P.; Frederick, Logan E.; Millington, Mallory R. [University of Utah, Department of Geology & Geophysics, Salt lake City, UT 84112 (United States); Vala, David [Murray High School, Murray, UT 84107 (United States); Reese, Barbara K. [Butler Middle School, Cottonwood Heights, UT 84121 (United States); Freedman, Dina R. [Hillside Middle School, Salt Lake City, UT 84108 (United States); Stenten, Christina J. [Draper Park Middle School, Draper, UT 84020 (United States); Trauscht, Jacob S.; Tingey, Christopher E.; Kip Solomon, D.; Fernandez, Diego P.; Bowen, Gabriel J. [University of Utah, Department of Geology & Geophysics, Salt lake City, UT 84112 (United States)

    2015-11-01

    Similar to fracking, the development of tar sand mining in the U.S. has moved faster than understanding of potential water quality impacts. Potential water quality impacts of tar sand mining, processing, and disposal to springs in canyons incised approximately 200 m into the Tavaputs Plateau, at the Uinta Basin southern rim, Utah, USA, were evaluated by hydrogeochemical sampling to determine potential sources of recharge, and chemical thermodynamic estimations to determine potential changes in transfer of bitumen compounds to water. Because the ridgetops in an area of the Tavaputs Plateau named PR Spring are starting to be developed for their tar sand resource, there is concern for potential hydrologic connection between these ridgetops and perennial springs in adjacent canyons on which depend ranching families, livestock, wildlife and recreationalists. Samples were collected from perennial springs to examine possible progression with elevation of parameters such as temperature, specific conductance, pH, dissolved oxygen, isotopic tracers of phase change, water-rock interaction, and age since recharge. The groundwater age dates indicate that the springs are recharged locally. The progression of hydrogeochemical parameters with elevation, in combination with the relatively short groundwater residence times, indicate that the recharge zone for these springs includes the surrounding ridges, and thereby suggests a hydrologic connection between the mining, processing, disposal area and the springs. Estimations based on chemical thermodynamic approaches indicate that bitumen compounds will have greatly enhanced solubility in water that comes into contact with the residual bitumen–solvent mixture in disposed tailings relative to water that currently comes into contact with natural tar. - Highlights: • The potential water quality impacts of the first US tar sand development are considered. • Analyses of perennial springs in adjacent canyons indicate hydrologic

  7. Markers inside wood : tree rings as archives of insect outbreaks, drift-sand dynamics, and spring flooding

    NARCIS (Netherlands)

    Copini, P.

    2015-01-01

    MARKERS INSIDE WOOD – TREE RINGS AS ARCHIVES OF INSECT OUTBREAKS, DRIFT-SAND DYNAMICS AND SPRING FLOODING Trees are long-living organisms that record ecologically relevant information in their xylem that can be accessed by dendrochronology, the study of tree rings. Specific environmental event

  8. Strip plantings planted in Spring of 1938 : Sand Lake Migratory Waterfowl Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document contains a record of vegetation planted on Sand Lake NWR in 1938. The date of the planting, the count of each species that was planted, and a survival...

  9. China Petrochemical Corporation

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    China Petrochemical Corporation (Sinopec Group) is a super-large petroleum and petrochemical enterprise group, established in July 1998 on the basis of the former China Petrochemical Corporation. Sinopec Group is a state-owned company solely invested by the state, function ing as a state-authorized investment organization in which the state holds the controlling share. Headquartered in Beijing, Sinopec Group has a registered capital of 182 billion yuan. The board chairman of Sinopec Group is its legal representative.

  10. Maximizing petrochemicals from refineries

    Energy Technology Data Exchange (ETDEWEB)

    Glover, B.; Foley, T.; Frey, S. [UOP, Des Plaines, IL (United States)

    2007-07-01

    New fuel quality requirements and high growth rates for petrochemicals are providing both challenges and opportunities for refineries. A key challenge in refineries today is to improve of the value of the products from the FCC unit. In particular, light FCC naphtha and LCO are prime candidates for improved utilization. Processing options have been developed focusing on new opportunities for these traditional fuel components. The Total Petrochemicals/UOP Olefin Cracking Process cracks C4-C8 olefins to produce propylene and ethylene. This process can be integrated into FCC units running at all severity levels to produce valuable light olefins while reducing the olefin content of the light FCC naphtha. Integration of the Olefin Cracking Process with an FCC unit can be accomplished to allow a range of operating modes which can accommodate changing demand for propylene, cracked naphtha and alkylate. Other processes developed by UOP allow for upgrading LCO into a range of products including petrochemical grade xylenes, benzene, high cetane diesel and low sulfur high octane gasoline. Various processing options are available which allow the products from LCO conversion to be adjusted based on the needs and opportunities of an individual refinery, as well as the external petrochemical demand cycles. This presentation will examine recent refining and petrochemical trends and highlight new process technologies that can be used to generate additional revenue from petrochemical production while addressing evolving clean fuel demands. (orig.)

  11. Springs

    Institute of Scientific and Technical Information of China (English)

    James J. Kilpatrick

    2006-01-01

    @@ Springs are not always the same. In some years, April bursts upon our Virginia hills in one prodigious leap-and all the stage is filled at once, whole choruses of tulips, arabesques of forsythia, cadenzas of flowering plum. The trees grow leaves overnight

  12. Refining and petrochemicals

    Energy Technology Data Exchange (ETDEWEB)

    Benazzi, E.; Alario, F

    2004-07-01

    In 2003, refining margins showed a clear improvement that continued throughout the first three quarters of 2004. Oil companies posted significantly higher earnings in 2003 compared to 2002, with the results of first quarter 2004 confirming this trend. Due to higher feedstock prices, the implementation of new capacity and more intense competition, the petrochemicals industry was not able to boost margins in 2003. In such difficult business conditions, aggravated by soaring crude prices, the petrochemicals industry is not likely to see any improvement in profitability before the second half of 2004. (author)

  13. Chemical and Petrochemical Sector

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This publication is a background document on the global chemical and petrochemical sector for the IEA publication Energy Technology Transitions in Industry (IEA, 2009). It provides further, more detailed information on the methodology and data issues for energy efficiency indicators for the sector. The indicators discussed offer insight regarding the energy efficiency improvement potential in the short- to medium-term (by proven technologies).

  14. Refining and petrochemicals

    Energy Technology Data Exchange (ETDEWEB)

    Constancio, Silva

    2006-07-01

    In 2004, refining margins showed a clear improvement that persisted throughout the first three quarters of 2005. This enabled oil companies to post significantly higher earnings for their refining activity in 2004 compared to 2003, with the results of the first half of 2005 confirming this trend. As for petrochemicals, despite a steady rise in the naphtha price, higher cash margins enabled a turnaround in 2004 as well as a clear improvement in oil company financial performance that should continue in 2005, judging by the net income figures reported for the first half-year. Despite this favorable business environment, capital expenditure in refining and petrochemicals remained at a low level, especially investment in new capacity, but a number of projects are being planned for the next five years. (author)

  15. Refining and petrochemicals

    Energy Technology Data Exchange (ETDEWEB)

    Benazzi, E

    2003-07-01

    Down sharply in 2002, refining margins showed a clear improvement in the first half-year of 2003. As a result, the earnings reported by oil companies for financial year 2002 were significantly lower than in 2001, but the prospects are brighter for 2003. In the petrochemicals sector, slow demand and higher feedstock prices eroded margins in 2002, especially in Europe and the United States. The financial results for the first part of 2003 seem to indicate that sector profitability will not improve before 2004. (author)

  16. Sinopec to Acquire Maoming Petrochem Giant

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    @@ Sinopec Corp. is considering a plan to purchase Maoming Petrochemical Company from its parent company next year, said Zhang Jiaren, director and vice president of Sinopec Corp. Maoming Petrochemical Company in Guangdong Province is one of the country's two oil refining enterprises with the production capacity exceeding 10 million tons.

  17. Analytic prognostic for petrochemical pipelines

    CERN Document Server

    Jaoude, Abdo Abou; El-Tawil, Khaled; Noura, Hassan; Ouladsine, Mustapha

    2012-01-01

    Pipelines tubes are part of vital mechanical systems largely used in petrochemical industries. They serve to transport natural gases or liquids. They are cylindrical tubes and are submitted to the risks of corrosion due to high PH concentrations of the transported liquids in addition to fatigue cracks due to the alternation of pressure-depression of gas along the time, initiating therefore in the tubes body micro-cracks that can propagate abruptly to lead to failure. The development of the prognostic process for such systems increases largely their performance and their availability, as well decreases the global cost of their missions. Therefore, this paper deals with a new prognostic approach to improve the performance of these pipelines. Only the first mode of crack, that is, the opening mode, is considered.

  18. GOVERNMENT TO REGULATE COAL-PETROCHEMICALS INDUSTRY

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ The Chinese Government will soon issue an industry policy to regulate the coal-chemicals sector, after a circular in August ordered local authorities to tighten their grip on the approval of new coal-to-petrochemicals projects in China.

  19. Bright Prospect Ahead for Petrochemical Industry

    Institute of Scientific and Technical Information of China (English)

    Cui Shuhong

    2010-01-01

    @@ China's petrochemical industry will show better performance in the year of 2010,Feng Shili,deputy secretary general with the China Petroleum and Chemical Industry Association(CPCIA),recently told China's news media in Beijing.

  20. Chemical composition and mutagenic assessment of petrochemical ...

    African Journals Online (AJOL)

    Aghomotsegin

    their chemical composition and genotoxic effects on cell reproduction. Two petrochemicals, air liquid ... some potentially mutagenic heavy metals. The effects of the ... shows good correlation with mammalian test systems. (Fiskesjö, 1985a).

  1. 尤因塔盆地P.R.泉始新统油砂成藏条件及成藏模式%Reservoir forming condition and model of P.R.spring of Eocene oil sand in Uinta Basin

    Institute of Scientific and Technical Information of China (English)

    单玄龙; 张俊锋; 罗洪浩

    2011-01-01

    Uinta Basin was located in the northeastern Utah State of U.S.A, which was rich in oil sand resources.The area of P.R.spring oil sand deposit was 650 km2 and the resource was 6.76 × 108t, whose reservior was Eocene lacustrine delta sand body in Green River Formation.The laramide orogeny changed the basin environment from marine facies to continent facies during Late Cretaceous and Paleogene.From the latest Paleoeene to Eo cene, the Uinta lake was widespread in the basin, and two sets of thick source rocks of Green River Formation were deposited.The middle Eocene source rock in upper Green River Formation was about 150 m thick, with rich organic matter in low maturity, so that abundant immature oil was generated since 30 Ma ago.P.R.spring oil sand deposit was degradation on slope type, which developed five sets of delta sandstone with good physical properties.After long-distance migration along continuous sand body, the immature oil generated from the upper source rock of Green River Formation entered the sandstone reservoir of lacustrine delta in Green River Formation of P.R.spring,and formed oil sand deposit eventually through biodegradation and water washing.%尤因塔盆地P.R泉位于美国犹他州东北部,油砂资源丰富,油砂矿藏面积约650 km,油砂储量约6.76×10 t,储层为始新统绿河组湖泊三角洲相砂体.晚白垩世到古近纪拉拉米运动使盆地由海相转变为陆相盆地.古新世末-始新世,尤因塔湖在盆地内分布广泛,并沉积了两套巨厚的绿河组烃源岩.其中绿河组上部的中始新统烃源岩厚达150 m,有机质丰富,且仍处于低熟阶段,约30 Ma以来,产生了大量的低熟油.P.R.泉油砂矿藏为斜坡降解型成藏模式,发育5套广布的三角洲砂体,储层物性好.绿河组上部烃源岩生成的低熟油沿着深入烃源岩中的连续砂体经过长距离的运移,进入P.R.泉绿河组三角洲的砂岩储层中,经过生物降解和水洗作用最终形成油砂矿藏.

  2. The trend of sand flux and the meteorology elements changes in the near-surface layer of Tengger desert in the spring of 2006

    Institute of Scientific and Technical Information of China (English)

    ZHANG ZhengCai; DONG ZhiBao; HAN LanYing; ZHAO AiGuo

    2008-01-01

    Dust storm events, especially those associated with strong winds, are immediately dangerous, and have long-term harmful effects. During a dust storm event, dust in the near-surface atmospheric layer decreases visibility, and changes local meteorological parameters. In this paper, we analyzed levels of near-surface turbulence during and outside a dust storm event and found differences in the degree of turbulence, with wind speed increasing and amounts of windblown sand greatly increasing air turbu-lence during the dust storms compared with the corresponding values on s sunny day. In addition, the wind profile during the dust storm deviated from the normal profile and became more complex. In the near-surface atmospheric layer, sand and dust flux during the dust storm also differed from those on a sunny day.

  3. Whether integrating refining and petrochemical business can provide opportunities for development of petrochemical industry in Serbia

    Directory of Open Access Journals (Sweden)

    Popović Zoran M.

    2016-01-01

    Full Text Available Since the beginning of 90s of last century both the petroleum industry and petrochemical industry have operated in difficult circumstances. In particularly, margins of petroleum and petrochemical industry were exacerbated during global economic crisis in 2008-2009 years. At that time, as one option that could be the solution, the global analysts had started to more intense investigate the benefits of Refining-Petrochemical Integration. Shortly afterwards, more and more petroleum refineries and petrochemical manufacturers began to see the future in this kind of operational, managerial, marketing and commercial connection. This paper evaluates, in particular, the achieved level of integration of refinery and petrochemical businesses in Central and South-Eastern Europe. And specifically, the paper identifies current capabilities and future chances of linking this kind of integration between Serbian refining and petrochemical players. The viability of integration between possible actors and benefits of every single refining-petrochemical interface in Serbia depend on many factors, and therefore each integrated system is unique and requires prior serious Cost Benefit Analysis.

  4. Petrochemical refinery and integrated petrochemical complexes; Refinaria petroquimica e complexos petroquimicos integrados

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Patricia C. dos; Seidl, Peter R.; Borschiver, Suzana [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica

    2008-07-01

    Global demand for light olefins points to strong prospects for growth, stimulating investments in overall productive capacity. With propylene demand growing slightly faster than that of ethylene, rising prices and difficulties in supplies of petrochemical feedstocks (mainly naphtha and natural gas), steam crackers alone are not able to fill the light olefins gap nor do they allow extraordinary margins. As petrochemical market dynamics also influence refining activities, there has been significant progress in the development of technologies for petrochemical refining, such as Petrochemical FCC. This petrochemistry-refining integration offers great opportunities for synergism since both industries share many common challenges, like more severe environmental requirements and optimizing the use of utilities. However, in the case of valuation of non-conventional oils (which tend to increase in importance in oil markets), to take full advantage of this opportunity to add value to low cost streams, deep conversion and treatment processes are of great significance in refining scheme to have enough feedstock for cracking. In this context, a petrochemical refinery seems to be an important alternative source of petrochemicals and may be integrated or not to a petrochemical complex. (author)

  5. A Study on Spatial Variability of Surface Soil Moisture of Sand Dune after the Reconstruction in Spring%改造后的沙丘地春季表层土壤水分空间变异性研究

    Institute of Scientific and Technical Information of China (English)

    冒静; 熊黑钢; 鲁魁锋; 夏倩柔

    2011-01-01

    [目的]为奇台县的防风治沙工程和沙漠植被建设提供参考.[方法]利用改造后的沙丘地和6种土地类型的实地测量数据,通过变异函数、Moran's Ⅰ系数、土壤水分等值线图探讨了改造后的沙丘地春季表层土壤水分的水平空间变异性及其原因.[结果]经种植梭梭改造后的沙丘地的土壤含水量呈现出3个明显与沙丘土壤水分不同的特点.(1)均值大于沙丘,土壤含水量接近于草地;(2)土壤水分半方差函数模型已表现为与沙丘水分的球状模型完全不同的指数模型,且变程小于样点间距,相关性显著;(3)土壤含水量等值线图等值线密集,并呈与梭梭林带走向一致的条带状分布.[结论]奇台县自2000年以来实行的防沙治沙已取得较大的成效.%[Objective and Method ] The reformed sand dune and six land types of field measurement data were used to conduct comparison and analysis of the spring surface soil moisture special variation characteristics to provide reference for resisting wind and stabiliting sand engineering and establishing vegetation in desert . [ Result]Results show that: there were 3 obvious charactenstics which were different from dune soil, after reforming with planting sacsaoul on sand . (1)The average value was greater than dune, soil moisture content was close to meadow; (2) The model of soil moisture semi- variance function expressed as index model that was completely from spherical model of dune sand moisture and the range smaller than spacing between samples with significant relation; (3)The constant value line map of soil moisture showed it was dense and band state distribution is in the same direction of sacsaoul forest band. [ Conclusion]The results showed that Qitai county since 2000 has made greater achievement in prevent and control desertification .

  6. Waste minimization in a petrochemical company

    Energy Technology Data Exchange (ETDEWEB)

    Anan, Marcelo [Oxiteno S.A., Industria e Comercio, Sao Paulo, SP (Brazil)

    1993-12-31

    A way to manage industrial effluents consists in reducing their generation or treating them when elimination or minimization is economically unachievable. This work aims to present the modifications adopted in a petrochemical plant to adequate and, or, reduce the generation of industrial effluent. 8 refs., 3 figs.

  7. Harbor Expansion Facilitates Crude and Petrochemicals Transportation

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    @@ Douwei Harbor attracting petrochem investment Substantial progress has been made in the preliminary preparation of Douwei Harbor project in Hui'an, Fujian Province. It is one of the major four transfer ports in China planned by the Ministry of Transportation. A number of projects, with a total investment approaching 10 billion yuan,will come under construction in the harbor zone.

  8. Fontainebleau Sand

    DEFF Research Database (Denmark)

    Leth, Caspar Thrane

    2006-01-01

    The report is a summary of results from laboratory tests in the geotechncial research group on Fontainebleau sand.......The report is a summary of results from laboratory tests in the geotechncial research group on Fontainebleau sand....

  9. Project risk management in complex petrochemical system

    Directory of Open Access Journals (Sweden)

    Kirin Snežana

    2012-01-01

    Full Text Available Investigation of risk in complex industrial systems, as well as evaluation of main factors influencing decision making and implementation process using large petrochemical company as an example, has proved the importance of successful project risk management. This is even more emphasized when analyzing systems with complex structure, i.e. with several organizational units. It has been shown that successful risk management requires modern methods, based on adequate application of statistical analysis methods.

  10. Handling Capacity of Dalian Petrochemical Port Surpasses Ten Million Tons

    Institute of Scientific and Technical Information of China (English)

    Chen Li

    2007-01-01

    @@ Dalian Petrochemical Port (of Dalian Petrochemical Corporation), CNPC's biggest petrochemical port,owns 15 1-100000 ton-grade berths and has an annual throughput of 18 million tons of crude, oil products,lubrication oil, atoleine, liquefied gas, and etc.. In recent years, the port handles over 10% of the total annual cargo throughput of all major ports in Dalian city and ranks second for its berthing capacity.

  11. Sand Lake WMD vegetation mapping project update

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Final report on the vegetation mapping project at Sand Lake Wetland Management District. This project is being completed by the use of SPRING software and ground...

  12. China Strengthens Macro-management in Petrochemical Branches

    Institute of Scientific and Technical Information of China (English)

    Xu Hui

    1997-01-01

    @@ China will strengthen macro-management in petrochemical branches in order to reasonably utilize the national petroleum resources and improve its competitive capacity in international refinery industrial market.

  13. ECONOMIC SIGNIFICANCE OF DESIGN, DEVELOPMENT, AND EXTRACTION OF BITUMEN FROM BITUMINOUS SAND AND HEAVY OIL IN NIGERIA

    OpenAIRE

    Nwizug-bee L. K.

    2016-01-01

    Nigeria has the largest oil sands and bitumen resources in Africa and is one of the main leading countries in the world from the point of view of its significant potential heavy oil deposits. Research of geological and physicochemical properties confirmed that the Nigerian bitumen is an important energy source and an alternative source of hydrocarbon feedstock for the petrochemical industry. Nigeria imports black oil for the petrochemical industry and its heavy oil can act in place of this bl...

  14. Brief Introduction to CNPC Daqing Petrochemical Complex(DPC)

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Daqing Petrochemical Complex (DPC), as a subsidiary enterprise of China National Petroleum Corporation (CNPC), was founded in April,1962 and is a giant scale integrated petrochemical enterprise in China. With great efforts in the past four decades, DPC has developed four product series including oil, chemical, fibre and fertilizer according to its development strategy of construction and production being synchronously done. At the end of 1980s, it has become the integrated base for petrochemical production, scientific research and construction, which is involved in RD, design,mechanical manufacture, construction and comprehensive community service system. DPC has made great contribution to the construction for Daqing Oilfield and the economic development for Daqing area. After the reorganization in 1999, DPC has formed six systems including petrochemical extended processing, engineering technology service, production technology service, machine manufhcturing,multi-business and living base service for its employees. Its main businesses are involved in petrochemical & petrochemical extended processing, design & construction for large petrochemical plant, civil building and road, installation for petrochemical plant, engineering supervision,equipment maintenance, manufacturing & processing for machine and instrument, computer software development & application, network administration, passenger & cargo transportation, equipment & material purchase, realty management and logistic service for its employees.

  15. Key Factors for Development of China's Petrochemical Industry

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ 1 Worldwide Market Volume and Development Trends of the Petrochemical Industry (1) Periodicity and Fluctuation The petrochemical industry has a typical periodicity that is shaped primarily by supply and demand on one hand and on the other hand by newly added capacity being put into production, operating rate and other uncertainty factors.

  16. Oil and Petrochem Sector Becomes Focus of Foreign Investment

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ Foreign investment sees a new growth in China's petroleum and petrochemical sector in 2004. It totaled between US$4 billion and US45 billion in 2003. Currently,the big-name oil and petrochemical multinationals expand their business in China.

  17. Key Polices for Development of Petroleum and Petrochemicals

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Recently, the State Economic and Trade Commission published the 10th Five-Year Plan (2001~2005) for the development of 13 major sectorsmachinery, automobile, light Industry,building materials, chemicals,nonferrous metals, steel, textile,petroleum, power, petrochemicals,pharmaceuticals, and coal. The key policies concerning petroleum and petrochemicals are excerpted as follows:

  18. SOLID WASTE MANAGEMENT IN TABRIZ PETROCHEMICAL COMPLEX

    Directory of Open Access Journals (Sweden)

    M. A. Abduli, M. Abbasi, T. Nasrabadi, H. Hoveidi, N. Razmkhah

    2006-07-01

    Full Text Available Tabriz petrochemical complex is located in the northwest of Iran. Major products of this industry include raw plastics like, polyethylene, polystyrene, acrylonitrile, butadiene, styrene, etc. Sources of waste generation include service units, health and cure units, water, power, steam and industrial processes units. In this study, different types of solid waste including hazardous and non hazardous solid wastes were investigated separately. The aim of the study was to focus on the management of the industrial wastes in order to minimize the adverse environmental impacts. In the first stage, locating map and dispersion limits were prepared. Then, the types and amounts of industrial waste generated in were evaluated by an inventory and inspection. Wastes were classified according to Environmental Protection Agency and Basel Standards and subsequently hazards of different types were investigated. The waste management of TPC is quite complex because of the different types of waste and their pollution. In some cases recycling/reuse of waste is the best option, but treatment and disposal are also necessary tools. In this study, using different sources and references, generally petrochemical sources, various solid waste management practices were investigated and the best options were selected. Some wastes should be treated before land filling and some of them should be reused or recycled. In the case of solid waste optimization, source reduction ways were recommended as well as prior incineration system was modified.

  19. Spring Outing

    Institute of Scientific and Technical Information of China (English)

    孙芳

    2011-01-01

    It is springtime.The days are getting warmer and the flowers are in bloom.With the pleasantly warm sunshine,gentle breeze and fresh air,it is high time for spring outing and sightseeing.Are you still hesitating? Let’s see what benefits spring outing brings about and then pay attention to some matters while taking a trip out in spring. Benefits of spring outing Spring outing is especially popular with children and teenagers.But many adults also like to go on spring trips.The reason might be that spring outing can have several benefits.

  20. Spring in the Arab Spring

    NARCIS (Netherlands)

    Borg, G.J.A.

    2011-01-01

    Column Gert Borg | Spring in the Arab Spring door dr. Gert Borg, onderzoeker bij Islam en Arabisch aan de Radboud Universiteit Nijmegen en voormalig directeur van het Nederlands-Vlaams Instituut Caïro Spring If, in Google, you type "Arab Spring" and hit the button, you get more than 14 mill

  1. Development of Oilfield Chemicals Based on Advantages in Petrochemical Feedstocks

    Institute of Scientific and Technical Information of China (English)

    Wang Xieqing; Peng Pu

    2002-01-01

    This article focuses on the routes for development of oilfield chemicals by making use of the feedstock advantages of the petrochemical industry. The diversification of oilfield chemicals has re sulted in thousand product grades. Because there are hundred domestic producers of oilfield chemicals,mostly medium and small producers, the fluctuations of feedstock prices and product quality cannot be conducive to the application and development of oilfield chemicals. This article illustrates the feasibility of oilfield chemical production by state-run medium and large petrochemical enterprises by allowing full play to their own advantages in petrochemical feedstocks.

  2. ECONOMIC SIGNIFICANCE OF DESIGN, DEVELOPMENT, AND EXTRACTION OF BITUMEN FROM BITUMINOUS SAND AND HEAVY OIL IN NIGERIA

    Directory of Open Access Journals (Sweden)

    Nwizug-bee L. K.

    2016-09-01

    Full Text Available Nigeria has the largest oil sands and bitumen resources in Africa and is one of the main leading countries in the world from the point of view of its significant potential heavy oil deposits. Research of geological and physicochemical properties confirmed that the Nigerian bitumen is an important energy source and an alternative source of hydrocarbon feedstock for the petrochemical industry. Nigeria imports black oil for the petrochemical industry and its heavy oil can act in place of this black oil. In addition, researchers have successfully established the possibility of producing electrical energy from this heavy oil. Tar sands and bitumen are able to help improve the economy of Nigeria

  3. Latest Development in China's Oil Refining & Petrochemical Sector

    Institute of Scientific and Technical Information of China (English)

    Xia Zuhua

    2008-01-01

    @@ China's big-three oil companies-CNPC, Sinopec and CNOOC-have intensified their competition in the domestic oil refining and petrochemical sector in recent years so as to better position themselves in the oil products market at home.

  4. Important TQM Implementation Contributors in Pakistani Petrochemical Sector

    Directory of Open Access Journals (Sweden)

    Yasir Latif

    2014-10-01

    Full Text Available This study discusses quality practices in Pakistani Petrochemical sector to understand TQM practices and their implementation in Pakistan. It helps to understand the role of leadership, vision & plan statement, employee participation and education & training as important constructs of TQM. It shows how these constructs help to speed up the TQM implementation in petrochemical sector like other constructs of TQM and finally company moves towards quality approach. The responses of executives, managerial staff and workers were received using questionnaire and online surveys which are sent through Google Drive. Data of 106 respondents was taken in this study and analyzed by SPSS18. Study shows that Total Quality Management culture is less understood by employees, thus less adopted and implemented in Pakistan. Petrochemical companies fail to adopt the TQM philosophy and processes, hence reducing productivity and profits. This research paper is very helpful for executives for TQM implementation in petrochemical sector.

  5. Brief Introduction of PetroChina Fushun Petrochemical Company

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    @@ PetroChina Fushun Pertrochemical Company (PFPC) is a large-scale integrated petrochemical complex, which owns three oil refineries, three large and medium-size chemical plants and one company for storage and transportation of oil products.

  6. Brief Introduction of PetroChina Dalian Petrochemical Company

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ PetroChina Dalian Petrochemical Company is capable of processing 20.50 million tons of crude oil once a year and manufacturing series of petrochemical products, such as gasoline,kerosene, diesel, lube oil, paraffin wax, benzene, polypropylene and fine fibre, etc. PetroChina Dalian Petrochemical Company is in the national leading position in terms of its key performance indicators,some of which are advanced in the world. As the largest oil refining base in China, it has leaped to a demonstrative refining and chemical enterprise with greatest competitiveness in PetroChina. It has become one of the important bases for exporting and transferring petrochemical products in China for its advantageous geographical position in Dalian, shore of the Yellow Sea and complete marine and land transportation facilities.

  7. New Petrochemical Processes Based on Direct Conversion of Methane

    OpenAIRE

    Faraguna F.; Jukić A.

    2015-01-01

    Petrochemistry is a branch of chemistry and chemical engineering that studies reactions and processes of the transformation of petroleum derivatives and natural gas into useful petrochemicals. In its beginning, petrochemistry, or rather the organic chemical industry, was based on the acetylene and Reppe chemistry. The main raw materials of the petrochemical industry nowadays are olefins and aromatic hydrocarbons, with a pronounced tendency toward development of new processes and higher usage ...

  8. Dalian Petrochemical Targets at World-class Giant

    Institute of Scientific and Technical Information of China (English)

    Sun Min

    2002-01-01

    @@ As one of PetroChina's most profitable enterprises, Dalian Petrochemical Company, located on the western bank of Pacific Occean, is remarkable for the first-class management and performance. In a recent interview with media, general manger of Dalian Petrochemical Company Jiang Fan said the company has made ambitious efforts to adopt advanced information technology, establish the internal corporate website and information platform for optimization and sharing of resources and boost the management efficiency in the past few years.

  9. A modular success story the Saudi petrochemical project

    Energy Technology Data Exchange (ETDEWEB)

    Kirven, J.B.; Swenson, C.R.

    1986-01-01

    The Saudi Petrochemical Company is referred to within this paper as ''Sadaf''. Sadaf is the phonetic spelling of the Arabic word for seashell and is a joint venture of Saudi Basic Industries Corporation (SABIC) and Pecten Arabian Ltd., an affiliate of Shell Oil Comapny, U.S.A. SABIC is a joint stock corporation responsible for the development of basic industries in the Kingdom in the petrochemicals, metals and fertilizers field.

  10. SPRING 2016

    NARCIS (Netherlands)

    Steinberger, Jessica; Unknown, [Unknown

    SPRING 2016, 11th edition of the SPRING series, is a single-track event that was sponsored by the special interest group Security – Intrusion Detection and Response (SIDAR) of the German Informatics Society (GI). The purpose of SPRING is to provide young researchers the opportunity to discuss their

  11. Biomonitoring of genotoxicity using micronuclei assay in native population of Astyanax jacuhiensis (Characiformes: Characidae) at sites under petrochemical influence

    Energy Technology Data Exchange (ETDEWEB)

    Torres de Lemos, Clarice [Divisao de Biologia, Programa de Pesquisas Ambientais, Departamento de Laboratorios, Fundacao Estadual de Protecao Ambiental Henrique Luis Roessler (FEPAM), Avenida Dr. Salvador Franca, 1707, 90690-000, Porto Alegre, RS (Brazil)], E-mail: claricetl@fepam.rs.gov.br; Almeida Iranco, Fabio de; D' Avila de Oliveira, Nanci Cristina; Dornelles de Souza, Getulio [Divisao de Biologia, Programa de Pesquisas Ambientais, Departamento de Laboratorios, Fundacao Estadual de Protecao Ambiental Henrique Luis Roessler (FEPAM), Avenida Dr. Salvador Franca, 1707, 90690-000, Porto Alegre, RS (Brazil); Guimaraes Fachel, Jandyra Maria [Instituto de Matematica, Departamento de Estatistica, Universidade Federal do Rio Grande do Sul. Av. Bento Goncalves, 9500, 91509-9000, Porto Alegre, RS (Brazil)

    2008-11-15

    Bom Jardim brook is a small stream that flows through an area under the influence of a Petrochemical Complex, demanding control over its quality, so a genotoxic evaluation was performed. This study was conducted in situ, based on previous analysis on the same subject. These were performed both in vitro, with Salmonella typhimurium and human lymphocytes, and in vivo, using bioassays with fish exposed to water from the study area. The purpose of this research was to assess the quality of the aquatic environment and possible effects from petrochemical pollution to surrounding native populations. Micronuclei (MNE) and nuclear abnormalities (NA) frequencies in peripheral blood of Astyanax jacuhiensis, a native fish species collected from the study area, were used as biomarkers. Study period was from summer/99 to spring/2001, using samples obtained seasonally at two ponds upstream from the industrial area (BJN and BJPa) and two sites in Bom Jardim brook (BJ002 and BJ000), which are subject to Complex influence. MNE and NA frequencies found in individuals from BJ002 and BJ000 were similar, showing positive genotoxic responses related to control sites BJN and BJPa. No differential sensitivity could be verified for micronuclei induction between genders of A. jacuhiensis in the studied population. This study showed that sites subject to petrochemical influence were under higher genotoxic impact. Biomarkers adequacy to the case and the sensitivity of A. jacuhiensis for water monitoring could be also inferred.

  12. Spring Tire

    Science.gov (United States)

    Asnani, Vivake M.; Benzing, Jim; Kish, Jim C.

    2011-01-01

    The spring tire is made from helical springs, requires no air or rubber, and consumes nearly zero energy. The tire design provides greater traction in sandy and/or rocky soil, can operate in microgravity and under harsh conditions (vastly varying temperatures), and is non-pneumatic. Like any tire, the spring tire is approximately a toroidal-shaped object intended to be mounted on a transportation wheel. Its basic function is also similar to a traditional tire, in that the spring tire contours to the surface on which it is driven to facilitate traction, and to reduce the transmission of vibration to the vehicle. The essential difference between other tires and the spring tire is the use of helical springs to support and/or distribute load. They are coiled wires that deform elastically under load with little energy loss.

  13. Beginning Spring

    CERN Document Server

    Caliskan, Mert

    2015-01-01

    Get up to speed quickly with this comprehensive guide toSpring Beginning Spring is the complete beginner's guide toJava's most popular framework. Written with an eye towardreal-world enterprises, the book covers all aspects of applicationdevelopment within the Spring Framework. Extensive samples withineach chapter allow developers to get up to speed quickly byproviding concrete references for experimentation, building askillset that drives successful application development byexploiting the full capabilities of Java's latest advances. Spring provides the exact toolset required to build anent

  14. Just Spring

    CERN Document Server

    Konda, Madhusudhan

    2011-01-01

    Get a concise introduction to Spring, the increasingly popular open source framework for building lightweight enterprise applications on the Java platform. This example-driven book for Java developers delves into the framework's basic features, as well as advanced concepts such as containers. You'll learn how Spring makes Java Messaging Service easier to work with, and how its support for Hibernate helps you work with data persistence and retrieval. Throughout Just Spring, you'll get your hands deep into sample code, beginning with a problem that illustrates dependency injection, Spring's co

  15. Components of sustainability considerations in management of petrochemical industries.

    Science.gov (United States)

    Aryanasl, Amir; Ghodousi, Jamal; Arjmandi, Reza; Mansouri, Nabiollah

    2017-06-01

    Sustainability comprises three pillars of social, environmental, and economic aspects. Petrochemical industry has a great inter-related complex impact on social and economic development of societies and adverse impact on almost all environmental aspects and resource depletion in many countries, which make sustainability a crucial issue for petrochemical industries. This study was conducted to propose components of sustainability considerations in management of petrochemical industries.A combination of exploratory study-to prepare a preliminary list of components of sustainable business in petrochemical industries based on review of literature and Delphi-to obtain experts' view on this preliminary list and provide a detailed list of components and sub-components that should be addressed to bring sustainability to petrochemical industries, were used.Two sets of components were provided. First general components, which include stakeholders (staffs, society, and environment) with four sub-components, financial resources with 11 sub-components, improvement of design and processes with nine sub-components, policy and strategy of cleaner production with seven sub-components and leadership with seven sub-components. The second operational components included raw material supply and preparation with five, synthesis with ten, product separation and refinement with nine, product handling and storage with five, emission abatement with eight, and improvement of technology and equipment with 16 sub-components.

  16. Sands styrke

    DEFF Research Database (Denmark)

    Jacobsen, H. Moust; Jørgensen, Mogens B.; Poulsen, H. Serup

    1975-01-01

    På grundlag af triaxialforsøg med D=7 og 20 cm og varierende højde på løse og faste lejringer af Blokhussand kan effekten af varierende højde-breddeforhold og spændingsniveau samt skalaeffekten bestemmes. Ved sammenligning med pladeforsøg med overfladelast op til 8 t/m2 kan den almindelige fremga...... fremgangsmåde ved bæreevneberegninger på sand undersøges....

  17. Spring Festival

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Spring Festival is the most important festival in China. It's to celebrate the lunar calendar's new year. In the evening before the Spring Festival, families get together and have a big meal. In many places people like to set off firecrackers. Dumplings are

  18. New Petrochemical Processes Based on Direct Conversion of Methane

    Directory of Open Access Journals (Sweden)

    Faraguna F.

    2015-01-01

    Full Text Available Petrochemistry is a branch of chemistry and chemical engineering that studies reactions and processes of the transformation of petroleum derivatives and natural gas into useful petrochemicals. In its beginning, petrochemistry, or rather the organic chemical industry, was based on the acetylene and Reppe chemistry. The main raw materials of the petrochemical industry nowadays are olefins and aromatic hydrocarbons, with a pronounced tendency toward development of new processes and higher usage of syngas, methane and other alkanes. Here, the reactions and new processes of direct conversion of methane into more valuable petrochemicals are reviewed. Reactions of partial oxidation of methane, dehydroaromatization of methane, oxidative and non-oxidative coupling of methane to higher hydrocarbons are also described and discussed.

  19. Corrosion problems and solutions in oil refining and petrochemical industry

    CERN Document Server

    Groysman, Alec

    2017-01-01

    This book addresses corrosion problems and their solutions at facilities in the oil refining and petrochemical industry, including cooling water and boiler feed water units. Further, it describes and analyzes corrosion control actions, corrosion monitoring, and corrosion management. Corrosion problems are a perennial issue in the oil refining and petrochemical industry, as they lead to a deterioration of the functional properties of metallic equipment and harm the environment – both of which need to be protected for the sake of current and future generations. Accordingly, this book examines and analyzes typical and atypical corrosion failure cases and their prevention at refineries and petrochemical facilities, including problems with: pipelines, tanks, furnaces, distillation columns, absorbers, heat exchangers, and pumps. In addition, it describes naphthenic acid corrosion, stress corrosion cracking, hydrogen damages, sulfidic corrosion, microbiologically induced corrosion, erosion-corrosion, and corrosion...

  20. [Appraisal of occupational stressor in petrochemical industry workers].

    Science.gov (United States)

    Tang, Xiao-ping; Tian, Hong-er; Huang, Tong; Li, Zhi-yuan; Hu, Ke-ming; Ge, Xi-yong; Jin, Lei; Gao, Qi; Zhang, Jing-jing; Wang, Yu; Liu, Wen-he

    2009-12-01

    To discuss the origin of occupational stress among petrochemical industry workers and to access the main occupational stressors that impact job satisfaction and mental health of petrochemical industry workers. A survey on occupational stressor was carried out by Occupational Stress Indicator (OSI) in 532 petrochemical industry workers (345 chemical and 187 logistic workers). The environment in workplace of chemical group was worse than that of contrast. The chemical workers had less control over job and they experienced more hazards, monotonous as well as role stressors than the logistic group. The scores of job satisfaction and mental health of chemical group (36.867 +/- 0.656, 43.734 +/- 0.542, respectively) were higher than that of contrast (40.321 +/- 0.901, 46.714 +/- 0.745, respectively) (P occupational stressors exist in chemical workers which affect chemical workers' job satisfaction and mental health with different levels.

  1. Smart Manufacturing for the Oil Refining and Petrochemical Industry

    Directory of Open Access Journals (Sweden)

    Zhihong Yuan

    2017-04-01

    Full Text Available Smart manufacturing will transform the oil refining and petrochemical sector into a connected, information-driven environment. Using real-time and high-value support systems, smart manufacturing enables a coordinated and performance-oriented manufacturing enterprise that responds quickly to customer demands and minimizes energy and material usage, while radically improving sustainability, productivity, innovation, and economic competitiveness. In this paper, several examples of the application of so-called “smart manufacturing” for the petrochemical sector are demonstrated, such as the fault detection of a catalytic cracking unit driven by big data, advanced optimization for the planning and scheduling of oil refinery sites, and more. Key scientific factors and challenges for the further smart manufacturing of chemical and petrochemical processes are identified.

  2. Analysis of corrosion failure of petrochemical pipe elbow

    Institute of Scientific and Technical Information of China (English)

    LI Xiao-yan; L(U) Tao

    2005-01-01

    Corrosive failure is frequently found in petrochemical pipelines which may lead to the leakage of the pipes and even the shutdown of the system. However, the corrosion mechanism is still not well understood due to the complex service environment, e.g. the corrosive fluids and the long term operation at higher temperature. The corrosion behaviour of a petrochemical pipe elbow was evaluated via visual examination and microanalysis with optical microscope and scanning electron microscope(SEM) together with energy dispersive analysis X-ray (EDAX). The corresponding corrosion mechanisms, the combination of grain boundary attach and the crevice attach together with the flow-accelerated corrosion, were proposed consequently.

  3. Quantitative risks analysis of maritime terminal petrochemical

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Leandro Silveira; Leal, Cesar A. [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Programa de Pos-Graduacao em Engenharia Mecanica (PROMEC)]. E-mail: leandro19889900@yahoo.com.br

    2008-07-01

    This work consists of the application of a computer program (RISKAN) developed for studies of quantification of industrial risks and also a revision of the models used in the program. As part the evaluation made, a test was performed with the application of the computer program to estimate the risks for a marine terminal for storage of petrochemical products, in the city of Rio Grande, Brazil. Thus, as part of the work, it was performed a Quantitative Risk Analysis associated to the terminal, both for the workers and for the population nearby, with a verification of acceptability using the tolerability limits established by the State Licensing Agency (FEPAM-RS). In the risk analysis methodology used internationally, the most used way of presenting results of social risks is in the graphical form with the use of the FN curves and for the individual risk it is common the use of the iso-risk curves traced on the map of the area where is the plant. In the beginning of the study, both a historical analysis of accidents and use of the technique of Preliminary Analysis of Risks were made in order to aid in the process of identification of the possible scenarios of accidents related to the activities in the terminal. After identifying the initiating events, their frequencies or probabilities of occurrence were estimated and followed by the calculations of the physical effects and deaths, with the use, inside the computer program, of published models of Prins Mauritz Laboratory and of American Institute of Chemical Engineers. The average social risk obtained for the external populations was of 8.7x10{sup -7} fatality.year{sup -1} and for the internal population (people working inside the terminal), 3.2x10{sup -4} fatality.year-1. The accident scenario that most contributed to the social risk was death due to exposure to the thermal radiation caused by pool fire, with 84.3% of the total estimated for external populations and 82.9% for the people inside the terminal. The

  4. Tar sand

    Energy Technology Data Exchange (ETDEWEB)

    McLendon, T.R.; Bartke, T.C.

    1990-01-01

    Research on tar sand is briefly discussed. The research program supported by the US Department of Energy (DOE) includes a variety of surface extraction schemes. The University of Utah has process development units (PDU) employing fluidized bed, hot, water-assisted, and fluidized-bed/heat-pipe, coupled combustor technology. Considerable process variable test data have been gathered on these systems: (1) a rotary kiln unit has been built recently; (2) solvent extraction processing is being examined; and (3) an advanced hydrogenation upgrading scheme (hydropyrolysis) has been developed. The University of Arkansas, in collaboration with Diversified Petroleum, Inc., has been working on a fatty acid, solvent extraction process. Oleic acid is the solvent/surfactant. Solvent is recovered by adjusting processing fluid concentrations to separate without expensive operations. Western Research Institute has a PDU-scale scheme called the Recycle Oil Pyrolysis and Extraction (ROPE) process, which combines solvent (hot recycle bitumen) and pyrolytic extraction. 14 refs., 19 figs.

  5. It's in the sand

    OpenAIRE

    Mitchell, Clive

    2016-01-01

    Sand is sand isn’t it? Sand gets everywhere but rather than a nuisance it is a valuable, high-purity raw material. Clive Mitchell, Industrial Minerals Specialist at the British Geological Survey (BGS), talks us through what sand is, what it can be used for and how to find it. His exploration of sand takes us from the deserts of Arabia to the damp sand pits of Mansfield!

  6. Building Whales in Sand and Mind.

    Science.gov (United States)

    Warner, Carolyn

    1980-01-01

    Describes two-week summer workshops on evolution, adaptation, and behavior of whales, conducted for children by Cold Spring Harbor Whaling Museum (New York), and culminating in creation of life-size sand sculptures of whales. Provides selected list of periodicals, teaching materials, identification guides, records, and societies devoted to whales…

  7. Building Whales in Sand and Mind.

    Science.gov (United States)

    Warner, Carolyn

    1980-01-01

    Describes two-week summer workshops on evolution, adaptation, and behavior of whales, conducted for children by Cold Spring Harbor Whaling Museum (New York), and culminating in creation of life-size sand sculptures of whales. Provides selected list of periodicals, teaching materials, identification guides, records, and societies devoted to whales…

  8. Brief Introduction of PetroChina Lanzhou Petrochemical Company

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    @@ As the largest oil refining and chemical production enterprise in the western part of China, PetroChina Lanzhou Petrochemical Company is a regional company of PetroChina Company Limited, which was restructured and merged from the former Lanzhou Petroleum Processing & Chemical Complex and the former Lanzhou Chemical Industry Company.

  9. Guangdong to Invest Heavily in Natural Gas and Petrochemical Projects

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Guangdong Provincial Government has decided to focus on 10 key projects this year with a total investment of 210,2 billion yuan, including energy infrastructure projects, natural gas projects,petrochemical projects, and auto projects. It is expected to complete an investment of 40 billion yuan

  10. Ecotoxicology of waters under the influence of a petrochemical complex

    Energy Technology Data Exchange (ETDEWEB)

    Noll, R.; Zandonai, V.; Ries, M.A. [CORSAN-SITEL, Triunfo, RS (Brazil). Polo Petrquimico do Sul

    1993-12-31

    This work summarizes the regular monitoring and studies conducted by SITEL - The Integrated Wastewater Treatment System of South Petrochemical Complex (South Brazil) - in order to evaluate the full environmental impact on waters in the area of influence of the effluents of the above mentioned Complex. 8 refs., 1 fig., 5 tabs.

  11. Maximum fossil fuel feedstock replacement potential of petrochemicals via biorefineries

    NARCIS (Netherlands)

    Brehmer, B.; Boom, R.M.; Sanders, J.P.M.

    2009-01-01

    The search for feedstock replacement options within the petrochemical industry should logically be based upon non-fossil resources. Retaining the functionality of the biochemicals in biomass for use as chemical products and precursors can lead to a sizeable reduction of fossil fuel consumption. This

  12. Maximum fossil fuel feedstock replacement potential of petrochemicals via biorefineries

    NARCIS (Netherlands)

    Brehmer, B.; Boom, R.M.; Sanders, J.P.M.

    2009-01-01

    The search for feedstock replacement options within the petrochemical industry should logically be based upon non-fossil resources. Retaining the functionality of the biochemicals in biomass for use as chemical products and precursors can lead to a sizeable reduction of fossil fuel consumption. This

  13. A demonstration of biofiltration for VOC removal in petrochemical industries.

    Science.gov (United States)

    Zhao, Lan; Huang, Shaobin; Wei, Zongmin

    2014-05-01

    A biotrickling filter demo has been set up in a petrochemical factory in Sinopec Group for about 10 months with a maximum inlet gas flow rate of 3000 m3 h(-1). The purpose of this project is to assess the ability of the biotrickling filter to remove hardly biodegradable VOCs such as benzene, toluene and xylene which are recalcitrant and poorly water soluble and commonly found in petrochemical factories. Light-weight hollow ceramic balls (Φ 5-8 cm) were used as the packing media treated with large amounts of circulating water (2.4 m3 m(-2) h(-1)) added with bacterial species. The controlled empty bed retention time (EBRT) of 240 s is a key parameter for reaching a removal efficiency of 95% for benzene, toluene, xylene, and 90% for total hydrocarbons. The demo has been successfully adopted and practically applied in waste air treatments in many petrochemical industries for about two years. The net inlet concentrations of benzene, toluene and xylene were varied from 0.5 to 3 g m(-3). The biofiltration process is highly efficient for the removal of hydrophobic and recalcitrant VOCs with various concentrations from the petrochemical factories. The SEM analysis of the bacterial community in the BTF during VOC removal showed that Pseudomonas putida and Klebsiella sp. phylum were dominant and shutdown periods could play a role in forming the community structural differences and leading to the changes of removal efficiencies.

  14. Industrial sand and gravel

    Science.gov (United States)

    Dolley, T.P.

    2013-01-01

    Domestic production of industrial sand and gravel in 2012 was about 49.5 Mt (55 million st), increasing 13 percent compared with that of 2011. Some important end uses for industrial sand and gravel include abrasives, filtration, foundry, glassmaking, hydraulic fracturing sand (frac sand) and silicon metal applications.

  15. Quantum Spring

    Science.gov (United States)

    Feng, Chao-Jun; Li, Xin-Zhou

    In this paper, we will give a short review on quantum spring, which is a Casimir effect from the helix boundary condition that proposed in our earlier works. The Casimir force parallel to the axis of the helix behaves very much like the force on a spring that obeys the Hooke's law when the ratio r of the pitch to the circumference of the helix is small, but in this case, the force comes from a quantum effect, so we would like to call it quantum spring. On the other hand, the force perpendicular to the axis decreases monotonously with the increasing of the ratio r. Both forces are attractive and their behaviors are the same in two and three dimensions.

  16. Eastern Scheldt Sand, Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Andersen, A. T; Madsen, E. B.; Schaarup-Jensen, A. L.

    The present data report contains data from 13 drained triaxial tests, performed on two different sand types in the Soil Mechanics Laboratory at Aalborg University in March, 1997. Two tests have been performed on Baskarp Sand No. 15, which has already ken extensively tested in the Soil Mechanics...... Laboratory. The remaining 11 triaxial tests have ben performed on Eastern Scheldt Sand, which is a material not yet investigated at the Soil Mechanics Laboratory. In the first pari of this data report, the characteristics of the two sand types in question will be presented. Next, a description...

  17. Challenges of knowledge sharing in the petrochemical industry

    Directory of Open Access Journals (Sweden)

    Chin Wei Chong

    2014-06-01

    Full Text Available Knowledge sharing is one of the important and also challenging parts in the success of KM implementation. The objective of this paper is to find out knowledge sharing barriers in the petrochemical companies in a Middle East country. Three main categories are found to have an impact on knowledge sharing in the companies. These categories are potential individual knowledge sharing barriers, potential organizational knowledge sharing barriers and potential technological knowledge sharing barriers. Data were collected by using a convenience sampling survey method. 500 questionnaires were distributed among employees and 302 questionnaires were returned. Trust, knowledge as power, communication, organizational hierarchy and knowledge sharing technological systems are found to have relationships with knowledge sharing. However, reward and recognition system have less significant relationship with knowledge sharing in the petrochemical companies.

  18. The Mexican petrochemical sector in the NAFTA negotiations

    Energy Technology Data Exchange (ETDEWEB)

    Kessel, G.; Kim, C.S. [Instituto Technologico Autonomo de Mexico, Magdalena Contreras (Mexico)

    1993-12-31

    Since 1985, there have been important changes in the Mexican petrochemical sector, including trade liberalization, deregulation and the elimination of subsidies. NAFTA represents another step towards liberalization of the sector. Given the low tariffs currently applied to international trade among the three nations, the authors do not anticipate major impacts of NAFTA on trade flows. Nevertheless, the elimination of restrictions to foreign investment is expected to increase capital flows into the sector and to promote productivity increases. On the other hand, the new barriers to trade in petrochemical feedstocks and the restrictions on private investment in infrastructure may negatively affect the sector`s growth, making it necessary to adjust domestic regulations to improve the performance of Pemex. 12 refs., 4 tabs.

  19. Air Quality Impacts of Petroleum Refining and Petrochemical Industries

    Directory of Open Access Journals (Sweden)

    Aiswarya Ragothaman

    2017-09-01

    Full Text Available Though refineries and petrochemical industries meet society’s energy demands and produce a range of useful chemicals, they can also affect air quality. The World Health Organization (WHO has identified polluted air as the single largest environmental risk, and hence it is necessary to strive for and maintain good air quality. To manage potential health impacts, it is important to implement proper air quality management by understanding the link between specific pollutant sources and resulting population exposures. These industries release pollutants such as Volatile Organic Compounds, greenhouse gases and particulate matter, from various parts of their operations. Air quality should be monitored and controlled more meticulously in developing nations where increased energy demands, industrialization and overpopulation has led to more emissions and lower air quality. This paper presents a review of findings and highlights from various studies on air quality impacts of petroleum refining and petrochemical plants in many regions in the world.

  20. Wastewater quality control at Sarnia (Ontario, Canada) petrochemical industries

    Energy Technology Data Exchange (ETDEWEB)

    Vianna, Arlinda C. [Servico Nacional de Aprendizagem Industrial (SENAI), Salvador, BA (Brazil); Souza, Eliane S.; Himmelman, William [Lambton College, Sarnia, ON (Canada)

    1993-12-31

    Ontario industries are required by law to meet strict regulations under the provinces under MISA initiative (Municipal-Industrial Strategy for Abatement). The petroleum-petrochemical area was selected as a leader in the development of new environmental objectives, and monitoring and training programs. Sarnia has become a world leader in industrial environmental control systems and the approach toward zero emissions. 4 refs., 6 figs., 2 tabs.

  1. Smart Manufacturing for the Oil Refining and Petrochemical Industry

    OpenAIRE

    Zhihong Yuan; Weizhong Qin; Jinsong Zhao

    2017-01-01

    Smart manufacturing will transform the oil refining and petrochemical sector into a connected, information-driven environment. Using real-time and high-value support systems, smart manufacturing enables a coordinated and performance-oriented manufacturing enterprise that responds quickly to customer demands and minimizes energy and material usage, while radically improving sustainability, productivity, innovation, and economic competitiveness. In this paper, several examples of the applicatio...

  2. Prospects for the Structural Readjustment of China's Petrochemical Industry

    Institute of Scientific and Technical Information of China (English)

    Ke Xiaoming; Mao Jiaxiang

    2002-01-01

    @@ 1.Structural Problems Facedby Domes tic Petrochemical Industry 1.1 Scattered distribution of enterprises with ostensibly small scale Currently China boasts over 130 petroleum processing enterprises, 60% of which have oil ditillation capacity less than 100 Mt/a apiece. Every province, or autonomous region or municipality directly under the Central Government with the exception of Tibet, Hainan, Yunnan and Guizhou has constructed their petroleum refineries. Eighteen sets of ethylene units are located in 15 cities of China.

  3. DIRECTION OF DEVELOPMENT FOR NATION'S PETROCHEMICAL PRODUCTS AND TECHNOLOGY

    Institute of Scientific and Technical Information of China (English)

    Qi Baohai

    2001-01-01

    @@ As a result of remarkable advance over the past several dozen years with continuous development of technology, rapid increase of new products, and steady expansion in production scope, China's petrochemical industry has grown into a well-established industrial system composed of more than 20 trades,providing over 40,000 kinds of product which are complete in range and generally serialized in variety.

  4. [Source identification of toxic wastewaters in a petrochemical industrial park].

    Science.gov (United States)

    Yang, Qian; Yu, Yin; Zhou, Yue-Xi; Chen, Xue-Min; Fu, Xiao-Yong; Wang, Miao

    2014-12-01

    Petrochemical wastewaters have toxic impacts on the microorganisms in biotreatment processes, which are prone to cause deterioration of effluent quality of the wastewater treatment plants. In this study, the inhibition effects of activated sludge's oxygen consumption were tested to evaluate the toxicity of production wastewaters in a petrochemical industrial park. The evaluation covered the wastewaters from not only different production units in the park, but also different production nodes in each unit. No direct correlation was observed between the toxicity effects and the organic contents, suggesting that the toxic properties of the effluents could not be predicted by the organic contents. In view of the variation of activated sludge sensitivity among different tests, the toxicity data were standardized according to the concentration-effect relationships of the standard toxic substance 3, 5-dichlorophenol on each day, in order to improve the comparability among the toxicity data. Furthermore, the Quality Emission Load (QEL) of corresponding standard toxic substance was calculated by multiplying the corresponding 3, 5-dichlorophenol concentration and the wastewater flow quantity, to indicate the toxicity emission contribution of each wastewater to the wastewater treatment plant. According to the rank list of the toxicity contribution of wastewater from different units and nodes, the sources of toxic wastewater in the petrochemical industrial park were clearly identified. This study provides effective guidance for source control of wastewater toxicity in the large industrial park.

  5. Microbial degradation of petrochemical waste-polycyclic aromatic hydrocarbons.

    Science.gov (United States)

    Fulekar, M H

    2017-01-01

    Petrochemical industry is one of the fastest growing industries. This industry has immense importance in the growth of economy and manufacture of large varieties of chemicals. The petrochemical industry is a hazardous group of industry generating hazardous waste containing organic and inorganic compounds. In spite of the present treatment process, the hazardous waste compounds are found untreated to the acceptable level and found discharged at soil-water environment resulting into the persistent organic-inorganic pollutant into the environment. The bioremediation will be the innovative techniques to remove the persistent pollutants in the environment. Petrochemical contaminated site was found to be a rich source of microbial consortium degrading polycyclic aromatic hydrocarbons. Indigenous microbial consortiums were identified and used for bioremediation of polycyclic aromatic hydrocarbons (naphthalene and anthracene) at the concentrations of 250, 500, and 750 ppm. The potential microorganism was also identified for naphthalene and anthracene, and their bioremediation was studied at varying concentrations. The bioremediation with consortium was found to be comparatively more effective than the potential microorganism used for bioremediation of each compound. Pseudomonas aeruginosa a potential organism was identified by 16S rRNA and further studied for the gene responsible for the PAH compounds. Indigenous microorganism as a consortium has been found effective and efficient source for remediation of organic compound-Polycyclic aromatic hydrocarbon and this will also be applicable to remediate the toxic compounds to clean up the environment.

  6. Biomanagement of petrochemical sludge using an exotic earthworm Eudrilus eugineae.

    Science.gov (United States)

    Banu, J Rajesh; Esakkiraj, S; Nagendran, R; Logakanthi, S

    2005-01-01

    Petrochemical industry have severe problem in disposing effluent and semisolid sludge despite repeated recycling. It requires further treatment prior to disposal of sludge. In recent years biological treatment methods received much attention and considered as an efficient low-cost treatment. One such method is vermiculture treatment The end product of vermicompost is rich in essential micro and macronutrients along with microorganisms in a very simple form. Adding cast, not only improves the soil structure and fertility but also leads to improvement in overall plant growth and thus increase their yield. The present study was carried out to dispose the petrochemical sludge biologically using an exotic earthworm Eudrilus eugineae. The petrochemical sludge at various concentrations 25, 50 and 75% were subjected to vermicomposting treatment for a period of 60 days. During the period of study, data were collected on life form of earthworm and chemical analysis of the sludge before and after treatment. The microbial analysis was carried out fortnightly. The results indicate that 25 and 50% concentration of sludge was ideal for the vermicomposting, whereas the higher concentration inhibits the vermicomposting.

  7. Influence green sand system by core sand additions

    OpenAIRE

    N. Špirutová; J. Beňo; V. Bednářová; J. Kříž; M. Kandrnál

    2012-01-01

    Today, about two thirds of iron alloys casting (especially for graphitizing alloys of iron) are produced into green sand systems with usually organically bonded cores. Separation of core sands from the green sand mixture is very difficult, after pouring. The core sand concentration increase due to circulation of green sand mixture in a closed circulation system. Furthermore in some foundries, core sands have been adding to green sand systems as a replacement for new sands. The goal of this co...

  8. Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Borup, Marianne; Hedegaard, Jette

    The Soil Mechanics Laboratory has started performing tests with a new sand, Baskarp No 15. Baskarp No 15 is a graded sand from Sweden. The shapes of the largest grains are round, while the small grains have sharp edges. The main part of of Baskarp No 15 is quarts, but it also contains feldspar...... and biotit. Mainly the sand will be used for tests concerning the development og the theory of building up pore pressure in sand, L. B. Ibsen 1993....

  9. Lund Sand No 0

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Jakobsen, Finn Rosendal

    During the last 15 years the Geotechnical Engineering Group (GEG) at Aalborg University has performed triaxial tests with a sand called Lund No 0. Lund No 0 is a graded sand from a gravel pit near Horsens in Denmark. For the classification of the sand the following tests have been performed: Sieve...

  10. Commercial Application of the CTV-IV Type Catalyst for Synthesis of Vinyl Acetate Developed by Shanghai Petrochemical Research Instit

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ The CTV-IV type catalyst for synthesis of vinyl acetate developed by the SINOPEC Shanghai Petrochemical Research Institute (SPRI) has been successfully applied on the #2 vinyl acetate unit at SINOPEC's Shanghai Petrochemical Company.

  11. Mideast Oil and Petrochem Industrial Influence on China

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ The petroleum and petrochemical industry in the Middle East region is exerting influence on the Chinese market because the Middle East has become an important option for China to import crude. In 2003, China imported 91.12 million tons of crude, of which the Middle East accounted for 50.7 percent. China imported 15.18 million tons of crude from Saudi Arabia in 2003, 16.7 percent of the nation's total import,and 12.39 million tons of crude from Iran, 13.6percent of the total.

  12. AspenTech to Provide VPS for CNOOC-Shell Nanhai Petrochemicals Complex

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    @@ AspenTech, a US supplier of software and services to the process industries, recently announced it has been awarded a contract to supply a series of operator training simulators for the US$4.3 billion Nanhai Petrochemicals Project of CNOOC-Shell Petrochemical Company (CSPC)at Daya Bay in Huizhou City in South China's Guangdong Province.

  13. Lymphohematopoietic Cancer Mortality and Morbidity of Workers in a Refinery/Petrochemical Complex in Korea

    Directory of Open Access Journals (Sweden)

    Dong-Hee Koh

    2011-03-01

    Conclusion: The results showed a potential relationship between leukemia and lymphohematopoietic cancers and exposure to benzene in refinery/petrochemical complex workers. This study yielded limited results due to a short observational period; therefore, a follow-up study must be performed to elucidate the relationship between petrochemical exposure and cancer rates.

  14. Petrochemicals from oil, natural gas, Ccoal and biomass: energy use, economics and innovation

    NARCIS (Netherlands)

    Ren, T.

    2009-01-01

    The petrochemical industry is faced with the dual challenges of climate change and the security of energy supply. To deal with these challenges, it is necessary to identify technologies for the production of basic petrochemicals that could potentially improve energy efficiency and/or utilizing

  15. Changxing Island in Dalian to Set up A World Class Petrochemical Park

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ In August 2008 "The Plan on Development of Petrochemi-cal Industry in Lingang Industry Area of Changxing Island in Dalian" had been assessed and approved by the expert team.According to this plan the Changxing Island will be basi-cally turned into a world-class Lingang petrochemical in-dustry park characterized by integration of oil refining and petrochemical sectors, and an industry intensive and eco-logical and environmentally friendly region. This industry park is scheduled to be developed in three phases to form in 15 years a national petrochemical base covering a total area of 25 km2. In the late "Eleventh Five-year Plan" period a region for development of specialty chemicals will be formed to prop up the low polluting, light and deep pro-cessing chemical sectors that can manufacture fine chemi-cals and new chemical materials to preliminarily set up a framework of petrochemical industry park.

  16. Integration of Petroleum Processing with Petrochemical Production—An Important Strategy for Development of Petrochemical Industry in the New Century

    Institute of Scientific and Technical Information of China (English)

    Qu Guohua

    2000-01-01

    @@1 Foreword In the 1990s China' s petroleum processing and petrochemical industry have achieved brisk development in parallel with the sharp growth of national economy. The volume of crude oil processed in China in 1998 reached 152. 4 Mt, increasing by 13% over the 1993 level (Figure 1), and China' s refining capacity was ranked the fourth in the world. The ethylene output reached 3.77 Mt, equaling to 1.87 times the total output in 1993 (Figure 2), and China' s ethylene capacity was ranked the sixth in the world.

  17. Applicability of anoxic-oxic process in treating petrochemical wastewater

    Institute of Scientific and Technical Information of China (English)

    Li-jun ZHAO; Fang MA; Jing-bo GUO

    2009-01-01

    To explore the applicability of anoxic-oxic (A/O) activated sludge process for petrochemical wastewater treatment, the relationship between bacterial community structure and pollutants loading/removal efficiencies was investigated by gas chromatograph-mass spectrometry (GC-MS), polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) and other conventional techniques. It showed that when the concentrations of the influent chemical oxygen demand (COD) and ammonia nitrogen (NH4+-N) were 420~560 mg/L and 64~100 mg/L, respectively, the corresponding average effluent concentra-tions were 160 mg/L and 55 mg/L, which were 1.6 and 2.2 times higher than those of the national standards in China, respectively, demonstrating the inefficient performances of A/O process. Analysis of GC-MS indicated that refractory pollutants were mainly removed by sludge adsorption, but not by biodegradation. PCR-DGGE profile analysis suggested that the biological system was species-rich, but there was apparent succession of the bacterial community structure in different locations of the A/O system. Variations of bacterial community structure and pollutant Ioadings had obvious influences on pollutants removal efficiencies. Thus, A/O process was inapplicable for the treatment of complicated petrochemical wastewater, and strategies such as the reinforcement of pre-treatment and two-stage A/O process were suggested.

  18. Sand Wave Migrations Within Monterey Submarine Canyon, California

    Science.gov (United States)

    Xu, J.; Wong, F. L.

    2006-12-01

    Repeated high-resolution multi-beam surveys revealed the existence of a sand wave field along the axis of the Monterey submarine canyon between 20 and 300 m water depth. These sand waves range in wave length from 20 to 70 m and 2 to 5 m in height. Comparison of sequential multi-beam grid data (months apart) indicates that the sand waves apparently migrate upcanyon at some places while the same data clearly show that the sand waves migrate downcanyon at other locations. One hypothesis is that strong internal tidal flows, whose upcanyon component is intensified by the narrow canyon, are responsible for forming the sand wave field and for migrating the sand waves upcanyon. Another hypothesis is that the sand wave field is formed by creeping (analogous to the movement within glaciers), and in general they move in the downcanyon direction. A field experiment was conducted in 2005-06 to measure the driving forces (in hypothesis #1) that form and move the sand waves, and to collect the internal sedimentological structure within the sand waves that could reveal information on hypothesis #2. A mooring designed to measure near-floor velocity profiles, temperature, salinity, and sediment concentration in the water column was deployed for one year (June 2005 -July 2006) at 250 m water depth, slightly downcanyon of the sand wave field. In addition, a mapping survey was conducted in February, 2006 for collecting multi-beam and chirp profiles in the canyon head area of the sand wave field. Preliminary examination of the ADCP (downward looking) showed some very interesting features - the near- floor current dramatically changes with the spring-neap cycle of the surface tide. The time variation of the along-canyon current during neap tides - a sudden jump of upcanyon velocity before gradually tapering down, is typical of internal tides (internal bores). The time variation during spring tides when along canyon velocities reverse directions from upcanyon to downcanyon and gradually

  19. Investigation of guided waves propagation in pipe buried in sand

    Energy Technology Data Exchange (ETDEWEB)

    Leinov, Eli; Cawley, Peter; Lowe, Michael J.S. [NDE Group, Department of Mechanical Engineering, Imperial College London, London SW7 2AZ (United Kingdom)

    2014-02-18

    The inspection of pipelines by guided wave testing is a well-established method for the detection of corrosion defects in pipelines, and is currently used routinely in a variety of industries, e.g. petrochemical and energy. When the method is applied to pipes buried in soil, test ranges tend to be significantly compromised because of attenuation of the waves caused by energy radiating into the soil. Moreover, the variability of soil conditions dictates different attenuation characteristics, which in-turn results in different, unpredictable, test ranges. We investigate experimentally the propagation and attenuation characteristics of guided waves in pipes buried in fine sand using a well characterized full scale experimental apparatus. The apparatus consists of an 8 inch-diameter, 5.6-meters long steel pipe embedded over 3 meters of its length in a rectangular container filled with fine sand, and an air-bladder for the application of overburden pressure. Longitudinal and torsional guided waves are excited in the pipe and recorded using a transducer ring (Guided Ultrasonics Ltd). Acoustic properties of the sand are measured independently in-situ and used to make model predictions of wave behavior in the buried pipe. We present the methodology and the systematic measurements of the guided waves under a range of conditions, including loose and compacted sand. It is found that the application of overburden pressure modifies the compaction of the sand and increases the attenuation, and that the measurement of the acoustic properties of sand allows model prediction of the attenuation of guided waves in buried pipes with a high level of confidence.

  20. Influence green sand system by core sand additions

    Directory of Open Access Journals (Sweden)

    N. Špirutová

    2012-01-01

    Full Text Available Today, about two thirds of iron alloys casting (especially for graphitizing alloys of iron are produced into green sand systems with usually organically bonded cores. Separation of core sands from the green sand mixture is very difficult, after pouring. The core sand concentration increase due to circulation of green sand mixture in a closed circulation system. Furthermore in some foundries, core sands have been adding to green sand systems as a replacement for new sands. The goal of this contribution is: “How the green sand systems are influenced by core sands?”This effect is considered by determination of selected technological properties and degree of green sand system re-bonding. From the studies, which have been published yet, there is not consistent opinion on influence of core sand dilution on green sand system properties. In order to simulation of the effect of core sands on the technological properties of green sands, there were applied the most common used technologies of cores production, which are based on bonding with phenolic resin. Core sand concentration added to green sand system, was up to 50 %. Influence of core sand dilution on basic properties of green sand systems was determined by evaluation of basic industrial properties: moisture, green compression strength and splitting strength, wet tensile strength, mixture stability against staling and physical-chemistry properties (pH, conductivity, and loss of ignition. Ratio of active betonite by Methylene blue test was also determined.

  1. The estimation of ability to reclame of moduling sands with biopolymer binders

    Directory of Open Access Journals (Sweden)

    J. Jakubski

    2011-04-01

    Full Text Available Applied up till now organic binding materials, on the basis of synthetic resins are characterised by good technological properties, but cause high emission of harmful substances. That’s why contemporary scientific researches are leading to progressive replacing the binders obtained from petrochemical materials with polymer biocomposites coming from renewable resources. Increasing concern of aliphatic polyesters such as polylactide, polycaprolactone, poly(hydroxyalkanoates and aliphatic-aromatic polyesters is caused by the possibility of using them for producing many biodegradable products. In that context it is important to expand the researches connected to using biopolymers as moulding sands binders. Contemporary authors’ papers were focused on technological properties and harmfulness for the environment of this ecological moulding sands. TThis article takes into consideration the ability to reclamation of moulding sands with biopolymer binders.

  2. Sands cykliske styrke

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo

    1992-01-01

    Sands cykliske styrke kan beskrives ved Cyclic Liquefaction, Mobilisering, Stabilization og Instant Stabilization. I artiklen beskrives hvorfor Stabilization og Instant Stabilization ikke observeres, når sands udrænede styrke undersøges i triaxial celler, der anvender prøver med dobbelt prøvehøjde....

  3. Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Bødker, Lars Bødker

    The Soil Mechanics Laboratory has started performing tests with a new sand, Baskarp No 15. Baskarp No 15 is a graded sand from Sweden. The shapes of the largest grains are round, while the small grains have sharp edges. The main part of of Baskarp No 15 is quarts, but it also contains feldspar...

  4. Saudi Arabia is committed to free trade in petrochemicals

    Energy Technology Data Exchange (ETDEWEB)

    Nazer, H.M.

    1987-05-01

    Saudi Arabia sees protectionism in the petrochemical industry as self-defeating and against the interests of the world economy. Taking a world view based on the forces of a free market, the Minister of Petroleum and Mineral Resources argues that a free market, at best, is burdened with second-best solutions unless it is a universal free market. The burden is greatest on developing countries. Saudi Arabia's industrialization program is aimed at developing independence from oil exports by enhancing the value-added of hydrocarbon and mineral resources through manufacturing activities. An internal free market based on competition and privatization is forming a stronger economic base than government nurturing of infant industries.

  5. Pyrolysis kinetics and residue characteristics of petrochemical industrial sludge.

    Science.gov (United States)

    Chiang, H L; Lo, J C; Tsai, J H; Chang, G M

    2000-02-01

    This study investigated the pyrolysis characteristics of sludge from wastewater treatment plants in the petrochemical industry and focused on the pyrolysis kinetics, elemental composition of residue, and volatile organic compounds (VOCs) of exhaust gas. As pyrolysis temperature increased to 773 K, the increasing rate of crude oil production tended to a stable condition. The result indicated that the optimal temperature of crude oil and water mixed production was 773 K. When pyrolysis temperature increased from 673 to 973 K, carbon, oxygen, nitrogen, and hydrogen concentrations of residue decreased and the sulfur concentration of residue increased. The concentrations of benzene, toluene,ethylbenzene, and styrene increased by the increasing pyrolysis temperature. We found that the reaction order of sludge pyrolysis was 2.5 and the activation energy of the reaction was 11.06 kJ/mol. We believe that our pyrolysis system is transitional between devolatilization and combustion.

  6. Long term effects of irrigation with petrochemical industry wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Aziz, O.; Inam, A.; Samiullah; Siddiqi, R.H. [Aligarh Muslim Univ. (India)

    1996-11-01

    Split plot designed field trials were conducted during 1988-1995 to study the long term effects of petrochemical industry wastewater on six crops and agricultural soils. It was observed that wastewater irrigation resulted in increased seed yield of all the crops selected, viz. wheat, triticale, chickpea, lentil and pigeonpea, except summer moong which showed a decrease in seed yield. Soil receiving the wastewater showed no significant changes in pH, total organic carbon, electrical conductivity, cation exchange capacity, micro- and macro-nutrients and SAR. Thus, it may be concluded that treated refinery wastewater met the irrigational quality requirements as its physico-chemical characteristics were within the permissible limits. The same could be said for the accumulation of heavy metals in the soil as well as in the grains making the latter safe for human consumption. 28 refs., 5 figs., 2 tabs.

  7. Catalytic wet hydrogen peroxide oxidation of a petrochemical wastewater.

    Science.gov (United States)

    Pariente, M I; Melero, J A; Martínez, F; Botas, J A; Gallego, A I

    2010-01-01

    Continuous Catalytic Wet Hydrogen Peroxide Oxidation (CWHPO) for the treatment of a petrochemical industry wastewater has been studied on a pilot plant scale process. The installation, based on a catalytic fixed bed reactor (FBR) coupled with a stirred tank reactor (STR), shows an interesting alternative for the intensification of a continuous CWHPO treatment. Agglomerated SBA-15 silica-supported iron oxide (Fe(2)O(3)/SBA-15) was used as Fenton-like catalyst. Several variables such as the temperature and hydrogen peroxide concentration, as well as the capacity of the pilot plant for the treatment of inlet polluted streams with different dilution degrees were studied. Remarkable results in terms of TOC reduction and increased biodegradability were achieved using 160 degrees C and moderate hydrogen peroxide initial concentration. Additionally, a good stability of the catalyst was evidenced for 8 hours of treatment with low iron leaching (less than 1 mg/L) under the best operating conditions.

  8. Summertime View of North Polar Sand Dunes

    Science.gov (United States)

    2006-01-01

    10 October 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a suite of dunes in one of the several north polar dune fields. The bright surfaces adjacent to some of the dunes are patches of frost. These dunes spend much of the autumn, winter, and spring seasons covered with carbon dioxide frost. Only in late spring and in summer are the dark windblown sands fully exposed. Over the course of the 9+ years of the MGS mission, the MOC team has sought evidence that sand dunes may be migrating downwind over time. However, no clear examples of the movement of a whole dune have been identified. On Earth, such movement is typically detectable in air photos of the smallest active dunes over periods of a few years. Owing to the fact that the north polar dunes spend much of each martian year under a cover of frost, perhaps these move much more slowly than their frost-free, terrestrial counterparts. The sand may also be somewhat cemented by ice or minerals, likewise preventing vigorous dune migration in the present environment. This view covers an area approximately 3 km (1.9 mi) wide and is illuminated by sunlight from the lower left. The dunes are located near 79.8oN, 127.1oW, and the picture was acquired on 11 September 2006.

  9. 春天%Spring

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ Days get longer and warmer in the spring. There are new leaves on the trees. Flowers begin to grow. Spring rain makes the grass green and helps the plants grow. Nature wears new clothes in many colors red, yellow, blue, white and purple. Spring is the time of new life. I love spring.

  10. Dual application of duckweed and azolla plants for wastewater treatment and renewable fuels and petrochemicals production

    National Research Council Canada - National Science Library

    Muradov, Nazim; Taha, Mohamed; Miranda, Ana F; Kadali, Krishna; Gujar, Amit; Rochfort, Simone; Stevenson, Trevor; Ball, Andrew S; Mouradov, Aidyn

    2014-01-01

    ... and production of value-added products. In this paper, the feasibility of the dual application of duckweed and azolla aquatic plants for wastewater treatment and production of renewable fuels and petrochemicals is explored...

  11. Yangzi Petrochemical Company Uses Natural Gas to Supplement Steam Cracker Fuel Gas

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ A major energy conservation and retrofitting project-ap-plication of natural gas as supplementary fuel for steam crackers has been successfully put into operation starting April 30, 2008 at the SINOPEC Yangzi Petrochemical Company.

  12. The Impact of Job Stress and Job Satisfaction on Workforce Productivity in an Iranian Petrochemical Industry

    OpenAIRE

    Naser Hoboubi; Alireza Choobineh; Fatemeh Kamari Ghanavati; Sareh Keshavarzi; Ali Akbar Hosseini

    2016-01-01

    Background: Job stress and job satisfaction are important factors affecting workforce productivity. This study was carried out to investigate the job stress, job satisfaction, and workforce productivity levels, to examine the effects of job stress and job satisfaction on workforce productivity, and to identify factors associated with productivity decrement among employees of an Iranian petrochemical industry. Methods: In this study, 125 randomly selected employees of an Iranian petrochemic...

  13. PETROCHEMICAL EMISSIONS PRODUCED BY THE OBJECTS OF THE AUTOMOBILE AND HIGHWAY COMPLEX

    Directory of Open Access Journals (Sweden)

    V. Iurchenko

    2015-12-01

    Full Text Available As a result of experimental researches it was established that the flow of petrochemicals from the ob-jects of the automobile and highway complex that spreads over the adjoining roadside areas corre-lates with the traffic intensity at objects of the same applicability. The highest specific flow of petro-chemicals (per 1 vehicle of traffic is emitted by gas stations.

  14. Sand and Gravel Deposits

    Data.gov (United States)

    Vermont Center for Geographic Information — This dataset is a statewide polygon coverage of sand, gravel, and stone resources. This database includes the best data available from the VT Agency of Natural...

  15. Sand and Gravel Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes sand and gravel operations in the United States. These data were obtained from information reported voluntarily to the USGS by the aggregate...

  16. Vestled - Hvide Sande

    DEFF Research Database (Denmark)

    Juel-Christiansen, Carsten; Hesselbjerg, Marianne; Schønherr, Torben

    2009-01-01

    Værket Vestled i Hvide Sande præsenteret i sammenhæng af 1000 nutidige landskabsarkitektoniske arbejder fra hele verden, hvor hvert værk vises på én side......Værket Vestled i Hvide Sande præsenteret i sammenhæng af 1000 nutidige landskabsarkitektoniske arbejder fra hele verden, hvor hvert værk vises på én side...

  17. Daqing Petrochemical Adopted Technology of Agglomeration New Energy Saving Production%Daqing Petrochemical Adopted Technology of Agglomeration New Energy Saving Production

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    To reduce energy consumption of equipment and exhaust emission to the uttermost, Daqing Petrochemical Company has developed pre-agglomeration production flow successfully and confirmed an optimized energy-saving method of differential pressure agglomeration. For a long time, BR equipment of 80,000 tons per year in Daqing Petrochemical Company have been adopting general isobaric technology and elutriation method to separate polymer and solvent, which caused over 10 tons of steam per ton of rubber and restricted the energy conservation and emission reduction of the enterprise.

  18. Environmental comparison of biobased chemicals from glutamic acid with their petrochemical equivalents.

    Science.gov (United States)

    Lammens, Tijs M; Potting, José; Sanders, Johan P M; De Boer, Imke J M

    2011-10-01

    Glutamic acid is an important constituent of waste streams from biofuels production. It is an interesting starting material for the synthesis of biobased chemicals, thereby decreasing the dependency on fossil fuels. The objective of this paper was to compare the environmental impact of four biobased chemicals from glutamic acid with their petrochemical equivalents, that is, N-methylpyrrolidone (NMP), N-vinylpyrrolidone (NVP), acrylonitrile (ACN), and succinonitrile (SCN). A consequential life cycle assessment was performed, wherein glutamic acid was obtained from sugar beet vinasse. The removed glutamic acid was substituted with cane molasses and ureum. The comparison between the four biobased and petrochemical products showed that for NMP and NVP the biobased version had less impact on the environment, while for ACN and SCN the petrochemical version had less impact on the environment. For the latter two an optimized scenario was computed, which showed that the process for SCN can be improved to a level at which it can compete with the petrochemical process. For biobased ACN large improvements are required to make it competitive with its petrochemical equivalent. The results of this LCA and the research preceding it also show that glutamic acid can be a building block for a variety of molecules that are currently produced from petrochemical resources. Currently, most methods to produce biobased products are biotechnological processes based on sugar, but this paper demonstrates that the use of amino acids from low-value byproducts can certainly be a method as well.

  19. Sources of Particular Pollutants in Ambient Air at a Petrochemical Enterprise

    Institute of Scientific and Technical Information of China (English)

    Xue Jianliang; Zhao Dongfeng; ChengJianguang; Chen Lu; Liu Wei

    2013-01-01

    The study on source apportionment of particular pollutants in ambient air at a petrochemical enterprise is the ba-sis of the control over air pollution. Through analyzing particular pollutants in the samples collected from one petrochemi-cal enterprise in northwestern China, the sources of particular pollutants were discussed. The test results showed that con-centrations of particular pollutants in different sites were remarkably different. Results showed that the sampling sites with higher concentrations of particular pollutants, including toluene, xylenes, NH3 and H2S, were located at the boundary of the petrochemical enterprise. Instead, the concentrations of NMHC in the ambient air sampling sites were higher than those at the boundary of the petrochemical enterprise. The sampling sites with higher concentrations of particular pollutants were located in the area that was close to the petrochemical enterprise. The results obtained from the Pearson correlation co-efifcients analyses, the factor analyses, andχ2-tests of the particular pollutants had revealed that NH3, H2S, toluene and xylenes at all sampling sites came from the same source, while NMHC might come from some other sources besides the petrochemical enterprise.

  20. Production of oil from Intermountain West tar sands deposits

    Energy Technology Data Exchange (ETDEWEB)

    Glassett, J.M.; Glassett, J.A.

    1976-03-01

    Six tar sand deposits in the Intermountain West, each containing more than one billion barrels of oil in place, are identified. All of these deposits are in eastern Utah and contain a total of twenty-eight billion barrels of oil. The names of the six deposits arranged in descending order of desirability for large-scale surface-mining oil recovery operations are as follows: Sunnyside, Tar Sand Triangle, Asphalt Ridge, P.R. Spring, Circle Cliffs, and Hill Creek. An overview of each deposit is presented including geology, surface-mining variables, chemical processing variables, environmental aspects, and economics. A comparison of Utah tar sands and Athabasca, Alberta, Canada tar sands is also presented.

  1. MECHANICAL REGENERATION OF SAND WASTE

    Directory of Open Access Journals (Sweden)

    D. I. Gnir

    2005-01-01

    Full Text Available The experimental activation of the sand regenerator of the firm SINTO is carried out at ОАО “MZOO". It is shown that sand grains are cleared from films of binding agents, that allows to use the treated sand for preparation of agglutinant and core sands.

  2. Thermal springs of Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    Breckenridge, R.M.; Hinckley, B.S.

    1978-01-01

    This bulletin attempts, first, to provide a comprehensive inventory of the thermal springs of Wyoming; second, to explore the geologic and hydrologic factors producing these springs; and, third, to analyze the springs collectively as an indicator of the geothermal resources of the state. A general discussion of the state's geology and the mechanisms of thermal spring production, along with a brief comparison of Wyoming's springs with worldwide thermal features are included. A discussion of geothermal energy resources, a guide for visitors, and an analysis of the flora of Wyoming's springs follow the spring inventory. The listing and analysis of Wyoming's thermal springs are arranged alphabetically by county. Tabulated data are given on elevation, ownership, access, water temperature, and flow rate. Each spring system is described and its history, general characteristics and uses, geology, hydrology, and chemistry are discussed. (MHR)

  3. Instant Spring Tool Suite

    CERN Document Server

    Chiang, Geoff

    2013-01-01

    Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. A tutorial guide that walks you through how to use the features of Spring Tool Suite using well defined sections for the different parts of Spring.Instant Spring Tool Suite is for novice to intermediate Java developers looking to get a head-start in enterprise application development using Spring Tool Suite and the Spring framework. If you are looking for a guide for effective application development using Spring Tool Suite, then this book is for you.

  4. Production optimisation in the petrochemical industry by hierarchical multivariate modelling

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Magnus; Furusjoe, Erik; Jansson, Aasa

    2004-06-01

    This project demonstrates the advantages of applying hierarchical multivariate modelling in the petrochemical industry in order to increase knowledge of the total process. The models indicate possible ways to optimise the process regarding the use of energy and raw material, which is directly linked to the environmental impact of the process. The refinery of Nynaes Refining AB (Goeteborg, Sweden) has acted as a demonstration site in this project. The models developed for the demonstration site resulted in: Detection of an unknown process disturbance and suggestions of possible causes; Indications on how to increase the yield in combination with energy savings; The possibility to predict product quality from on-line process measurements, making the results available at a higher frequency than customary laboratory analysis; Quantification of the gradually lowered efficiency of heat transfer in the furnace and increased fuel consumption as an effect of soot build-up on the furnace coils; Increased knowledge of the relation between production rate and the efficiency of the heat exchangers. This report is one of two reports from the project. It contains a technical discussion of the result with some degree of detail. A shorter and more easily accessible report is also available, see IVL report B1586-A.

  5. Noise pollution in a Refining & Petrochemical Company in Nigeria.

    Directory of Open Access Journals (Sweden)

    J.O. Osarenmwinda

    2015-04-01

    Full Text Available Nowadays, the concern about noise pollution is acquiring considerable importance especiallly in industrial enviroment where there exist alot of machinerys and equipment. The aim of this study was to determine the level of noise pollution generated by some plants specifically Carbon Black Plant, Power Plant & Utilities, Waste Water treatment Plant and Fuels Plant in Warri Refining & Petrochemical Company (WRPC, Warri, Nigeria and recommmend strageties for noise control. Noise level data was obtained from the environmental monitoring unit of WRPC for period April to November, 2012 .The results showed that the noise level exceeded the 85 dB(A WHO recommended limit for industrial area in the Carbon Black Plant,Power Plant & Utilities and Fuels Plant in WRPC but was lower than 85 dB(A in Waste Water treatment Plant section of WRPC.It was observed that such noise pollution can present health problems to the workers.Recommendations have been made to the company in this study to remedy this problems and challenges.

  6. Production optimisation in the petrochemical industry by hierarchical multivariate modelling

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Magnus; Furusjoe, Erik; Jansson, Aasa

    2004-06-01

    This project demonstrates the advantages of applying hierarchical multivariate modelling in the petrochemical industry in order to increase knowledge of the total process. The models indicate possible ways to optimise the process regarding the use of energy and raw material, which is directly linked to the environmental impact of the process. The refinery of Nynaes Refining AB (Goeteborg, Sweden) has acted as a demonstration site in this project. The models developed for the demonstration site resulted in: Detection of an unknown process disturbance and suggestions of possible causes; Indications on how to increase the yield in combination with energy savings; The possibility to predict product quality from on-line process measurements, making the results available at a higher frequency than customary laboratory analysis; Quantification of the gradually lowered efficiency of heat transfer in the furnace and increased fuel consumption as an effect of soot build-up on the furnace coils; Increased knowledge of the relation between production rate and the efficiency of the heat exchangers. This report is one of two reports from the project. It contains a technical discussion of the result with some degree of detail. A shorter and more easily accessible report is also available, see IVL report B1586-A.

  7. Petrochemical wastewater treatment by means of clean electrochemical technologies

    Energy Technology Data Exchange (ETDEWEB)

    Dimoglo, A.; Akbulut, H.Y.; Cihan, F.; Karpuzcu, M. [Gebze Institute of Technology, Kocaeli (Turkey)

    2004-09-01

    The removal of chemical oxygen demand (COD), turbidity, phenol, hydrocarbon and grease from petrochemical wastewater (PCWW) was experimentally done by using electroflotation (EF) and electrocoagulation (EC). In the EF unit, a graphite anode and a stainless steel mesh as cathode were used. In the EC unit, iron and aluminium were used simultaneously as materials for two blocks of alternating electrodes. The reactor voltage was 12 V, current density (CD) was varied from 5 to 15 mA cm{sup -2}, and the residence time varied in the limits of 2-20 min for EF and 1-10 min for EC. The results have shown that EC removes the mentioned contaminants from PCWW more effectively than EF. Turbidity removal in the process of PCWW purification was estimated as 83% for EF and 88% for EC. The yields of phenol, hydrocarbon and grease removal by EC were examined under different values of residence time, CD, and with iron and aluminium as materials for electrodes. (orig.)

  8. Development Trend of China's Petroleum and Petrochemical Equipment Manufacturing Industry%Development Trend of China's Petroleum and Petrochemical Equipment Manufacturing Industry

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The equipment manufacturing industry is a strategic and fundamental industry which provides equipment for all industries including the defense industry. The domestication of equipment manufacturing is a miniature of rapid development of China's national economy. For the petroleum and petrochemical industry, the quality of equipment is essential for the development of the oil and gas industry. In recent years,

  9. Bituminous sands : tax issues

    Energy Technology Data Exchange (ETDEWEB)

    Patel, B. [PricewaterhouseCoopers LLP, Calgary, AB (Canada)

    2004-07-01

    This paper examined some of the tax issues associated with the production of bitumen or synthetic crude oil from oil sands. The oil sands deposits in Alberta are gaining more attention as the supplies of conventional oil in Canada decline. The oil sands reserves located in the Athabasca, Cold Lake and Peace River areas contain about 2.5 trillion barrels of highly viscous hydrocarbons called bitumen, of which nearly 315 billion barrels are recoverable with current technology. The extraction method varies for each geographic area, and even within zones and reservoirs. The two most common extraction methods are surface mining and in-situ extraction such as cyclic steam stimulation (CSS); low pressure steam flood; pressure cycle steam drive; steam assisted gravity drainage (SAGD); hot water flooding; and, fire flood. This paper also discussed the following general tax issues: bituminous sands definition; bituminous sands leases and Canadian development expense versus Canadian oil and gas property expense (COGPE); Canadian exploration expense (CEE) for surface mining versus in-situ methods; additional capital cost allowance; and, scientific research and experimental development (SR and ED). 15 refs.

  10. Asthma, respiratory symptoms and lung function in children living near a petrochemical site.

    Science.gov (United States)

    Rovira, Enric; Cuadras, Anna; Aguilar, Xavier; Esteban, Leonardo; Borràs-Santos, Alícia; Zock, Jan-Paul; Sunyer, Jordi

    2014-08-01

    Residential proximity to environmental hazards has been related to adverse health outcomes. Respiratory health and allergies in children living near petrochemical sites have not been extensively studied. We evaluated the association between residential proximity to the petrochemical site of Tarragona (Catalonia, Spain) and the prevalence of asthma, respiratory symptoms and lung function in children. Children aged 6-7 (n=2672) and adolescents aged 13-14 (n=2524) residing near two large petrochemical sites and those living in a city with medium vehicular traffic were cross-sectionally compared with children from an area with low vehicular traffic and without industry. The prevalence of symptoms was measured using the International Study of Asthma and Allergies in Childhood written and video questionnaires. Lung function measurements were done in a subsample of 959 adolescents in the four areas. Multivariable analyses were done to estimate the effects of the residential area on symptoms and lung function adjusted for potential confounders. Crude prevalence of symptoms was similar across the studied areas. After adjustment, children and adolescents living near a petrochemical site had a statistically significant higher prevalence of respiratory hospitalizations in the previous year (Prevalence Ratio (PR)=1.49; 95%CI, 1.06-2.09) and of nocturnal cough (PR=1.29; 95%CI 1.05-1.57), respectively. Reduced lung function values among adolescents residing near the petrochemical areas were not observed. Although a higher prevalence of asthma in children and adolescents living near the petrochemical sites could not be demonstrated, as described in other studies, respiratory hospitalizations and nocturnal cough could be related to short-term exposures to pollutants. Other clinical and sub-clinical respiratory health effects in the petrochemical industry areas should be investigated. Copyright © 2014 Elsevier Inc. All rights reserved.

  11. Lund Sand No 0

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Jakobsen, Finn Rosendal

    During the last 15 years the Geotechnical Engineering Group (GEG) at Aalborg University has performed triaxial tests with a sand called Lund No 0. Lund No 0 is a graded sand from a gravel pit near Horsens in Denmark. For the classification of the sand the following tests have been performed: Sieve...... test, Grain density, ds, Maximum, emax, and minimum, emin, void ratio. The strength parameters of Lund No 0 are detennined by some drained and undrained triaxial tests in the Danish Triaxial Cell. The Danish Triaxial Cell prescribes smooth pressure heads and specimens with equal height and diameter....... Four series with Id equal to 0.92, 0.87 0.76 and 0.55 have been performed....

  12. Effluents and Solid Waste Analysis in a Petrochemical Company- A Case Study of Eleme Petrochemical Company Ltd, Port Harcourt, Nigeria

    Directory of Open Access Journals (Sweden)

    A. U. Israel

    2008-01-01

    Full Text Available Effluents and soil samples where sediments from the treated effluents are dumped were analyzed for physicochemical properties, metallic and non-metallic ions. These parameters were compared with established international standard (FEPA. Effluents were classified as process waste water (PWW, clarified water (CW, and final discharge (FD. The petrochemical effluents contained very high concentration of TDS (284.00±014 mg/L and significant concentrations of TSS (78.89±0.01 mg/L, COD (30.10±0.02 mg/L, DO (13.20±0.01 mg/L, BOD (6.12±0.00 mg/L, PO43- (4.34±0.00 mg/L, SO42- (3.59±0.00 mg/L, Cl- (55.52±0.01 mg/L and NO3- (8.40±0.01 mg/L. Low concentrations of iron, zinc, copper, cadmium, lead, nickel and cobalt was also observed. Some heavy metals were not detected at all in some of the effluent samples analyzed. Apart from temperature and total dissolved solid TDS, all the other parameters were below FEPA effluent limitations for guidelines for Petroleum Refinery, Fuel/Gasoline oil category in Nigeria.

  13. Water Treatment Technology - Springs.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on springs provides instructional materials for two competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on spring basin construction and spring protection. For each competency, student…

  14. UK Frac Sand Resources

    OpenAIRE

    Mitchell, C J

    2015-01-01

    Although still just a glimmer in the gas man’s eye, the prospect of shale hydrocarbon (oil and gas) development in the UK has many companies thinking about the industrial minerals it will require. Chief amongst these is silica sand which is used as a ‘proppant’ in the hydraulic fracturing, or ‘fracking’, of shales to help release the gas. The UK has large resources of sand and sandstone, of which only a small proportion have the necessary technical properties that classify them as ‘silica san...

  15. Experimental research on vibration reduction of high-rise petrochemical equipment

    Science.gov (United States)

    Hao, W.; He, L. D.; Chang, J.; Han, W. F.; Wang, L. X.

    2012-05-01

    The wind-induced vibration of high-rise petrochemical equipment would do great harm to equipment operation and cause fatigue damage easily. Thus it is necessary to install some control device to reduce the vibration actively. Existing reinforcement methods include enlarging structural section, welding wind girder, adding braced frame system, fixing taut cable, etc. But each has some shortcomings. Therefore, the tuned mass damper (TMD), rarely used in high-rise petrochemical equipment, is studied by experiment to minimize wind-induced vibration, ensure safety operation and prolong service life. In the experiment, high-rise petrochemical equipment is properly simplified in order to verify the feasibility of the TMD. Parameters of the TMD are mainly researched, which include mass ratio and damping ratio. During the process, different mass ratios and damping ratios have been taken into account to understand the characteristics of the TMD under different conditions. By experiment, the changing tendencies of the natural frequency, damping ratio and top maximum displacement have been given after the simulator is implemented with the TMD. Experimental results show that the TMD is feasible for the wind-induced vibration control of high-rise petrochemical equipment, and that top maximum displacement of the simulator reduces by about 45% in the experimental condition. The experimental research has provided valuable preferences for practical application of the TMD in petrochemical field.

  16. Obtaining petrochemical products from ethanol; Obtencao de produtos petroquimicos a partir do etanol

    Energy Technology Data Exchange (ETDEWEB)

    Silverio, Carlos Augusto N.; Oliveira, Claudia Vasconcellos R. de; Joao, Rafael Richard; Hashizume, Tulio Kenji C. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Currently, high oil prices, low availability of traditional raw material (natural gas and petrochemical naphtha), increasing recognition of the importance of the preservation of nature and reducing emissions of pollutants have been creating a great opportunity for the petrochemical industry to seek alternative materials from renewable resources. The ethanol, which obtained a virtuous journey as fuel, is a very promising alternative to be used for the production of petrochemical products. However, the use of ethanol as a raw material will require a considerable increase in its production, what can be achieved through the development of new production technologies based on biomass and the construction of integrated biorefineries. So, this study aims to identify and compare conventional petrochemical routes with routes from this renewable raw material in order to evaluate their technical and economic feasibility. A preliminary analysis was performed between four petrochemical products: acetic acid, acetaldehyde, the ethyl acetate and ethylene. From this initial analysis, acetic acid and ethylene were selected for a more comprehensive feasibility study considering their production using ethanol as raw material, what is called ethanol chemistry. (author)

  17. Pro Spring Batch

    CERN Document Server

    Minella, Michael T

    2011-01-01

    Since its release, Spring Framework has transformed virtually every aspect of Java development including web applications, security, aspect-oriented programming, persistence, and messaging. Spring Batch, one of its newer additions, now brings the same familiar Spring idioms to batch processing. Spring Batch addresses the needs of any batch process, from the complex calculations performed in the biggest financial institutions to simple data migrations that occur with many software development projects. Pro Spring Batch is intended to answer three questions: *What? What is batch processing? What

  18. Building with Sand

    Science.gov (United States)

    Ashbrook, Peggy

    2010-01-01

    Children playing in damp sand invariably try to make a tower or a tunnel. By providing experiences with a variety of materials, alone and together, teachers set up the conditions for children to learn through their senses and ensure that a class approaches a topic with a common set of experiences to build on. Learning about the properties of…

  19. Faraday, Jets, and Sand

    NARCIS (Netherlands)

    Sandtke, M.; van der Meer, Roger M.; Versluis, Andreas Michel; Lohse, Detlef

    2003-01-01

    When a 6-mm layer of fine sand with an average grain size of 40 µm is poured into a cylindrical container and shaken vertically, thin jets are seen to emerge from an airy cloud of grains, almost like protuberances from the corona of the sun. A quasi two-dimensional setup reveals the jet-formation

  20. Building with Sand

    Science.gov (United States)

    Ashbrook, Peggy

    2010-01-01

    Children playing in damp sand invariably try to make a tower or a tunnel. By providing experiences with a variety of materials, alone and together, teachers set up the conditions for children to learn through their senses and ensure that a class approaches a topic with a common set of experiences to build on. Learning about the properties of…

  1. Speleothems and Sand Castles

    Science.gov (United States)

    Hance, Trevor; Befus, Kevin

    2015-01-01

    The idea of building sand castles evokes images of lazy summer days at the beach, listening to waves crash, enjoying salty breezes, and just unplugging for a while to let our inner child explore the wonderful natural toys beneath our feet. The idea of exploring caves might evoke feelings and images of claustrophobia or pioneers and Native…

  2. Virksomhedens sande ansigt

    DEFF Research Database (Denmark)

    Lundholt, Marianne Wolff

    2017-01-01

    Er modhistorier en byrde eller en styrke i forandringsprocesser? Hvad stiller vi op, når adgangen til organisationens sande identitet går gennem medarbejdernes modhistorier? Når vi sammenholder denne erkendelse med vores viden om, at medarbejdere helt naturligt afholder sig fra at videregive disse...

  3. Sand (CSW4)

    CSIR Research Space (South Africa)

    Estuarine and Coastal Research Unit

    1982-12-01

    Full Text Available This report is one of a series on Cape Estuaries being published under the general title "The Estuaries of the Cape, Part 2". The report provides information on sand estuary: historical background, abiotic and biotic characteristics. It is pointed...

  4. Sand supply to beaches

    Science.gov (United States)

    Aagaard, Troels

    2017-04-01

    In most cases, beaches and dunes are built by sand that has been transported onshore from the shoreface. While this has been known for a long time, we are still not able to quantitatively predict onshore sediment transport and sand supply to beaches. Sediment transport processes operating during brief, high-energy stormy conditions - when beaches erode and sand moves offshore - are fairly well known and they can be modelled with a reasonable degree of confidence. However, the slower onshore sand transport leading to beach recovery under low-to-moderate energy conditions - and the reason why beaches and dunes exist in the first place - is not yet well understood. This severely limits our capability to understand and predict coastal behaviour on long time scales, for example in response to changing sea level or wave conditions. This paper will discuss issues and recent developments in sediment transport measurement and prediction on the lower and upper shoreface and into the swash zone. The focus will be on the integration and upscaling of small-scale deterministic process measurements into parametric models that may increase modelling capabilities of coastal behaviour on larger temporal and spatial scales.

  5. Erosion phenomena in sand moulds

    Directory of Open Access Journals (Sweden)

    A. Chojecki

    2008-03-01

    Full Text Available Authors studicd the erosion phcnorncna in sand moulds pured with cast iron. Thc study comprises an evaluation of erosionresistance of thc three sands: grccn sand. sand bondcd with inorganic or organic bindcr. It was concluded that thc most resistant is [heclassic green sand with thc addition of 5 B coal dust. Resistance of the sand with organic binder is generally weak and dcvnds onkind of used raisin. Spccinl nztcntion was paid to the sands with no organic bindcr watcr glass and phospha~c. It was Sound that thcirrcsistance depends on dehydratation conditions. When the mould is stored in law humidity of atmosphcrc the very strong crosion canbe expected. It rcsul ts hrn thc micro fractures in the bridges of binders, joining the grains of the sable. This phcnomcna facilitates thetearing away of fragments of sand [tom the surface

  6. Data on greenhouse gases emission in condensate separation unit of a petrochemical company in Iran.

    Science.gov (United States)

    Ahmadi, Mehdi; Dastorian, Mehrshad; Jafarzadeh, Nemat; Jorfi, Sahand; Ramavandi, Bahman

    2016-09-01

    Since global warming due to greenhouse gas emissions is no respecter of geographical boundaries of countries, concerted mitigation activities such as Clean Development Mechanism (CDM), are suitable. In this mechanism, some developed countries can gain certified emission reduction credits from emission reduction actions undertaken in developing countries. Thus, the data of greenhouse gas emissions in developing countries would be informative for implementing of CDM. Herein, the data of greenhouse gas emissions of Bandar Imam Petrochemical Complex, one of the biggest petrochemical companies in the Middle East region is presented. The data was acquired using emission factor method and self-presented raw information of the Bandar Imam Petrochemical Complex. Overall, the data will be interesting for environmentalists, non-governmental organization (NGO), and developed countries to perform CDM.

  7. A Mathematical Model Based on Supply Chain Optimization for International Petrochemical Engineering Projects

    Institute of Scientific and Technical Information of China (English)

    Gao Ning; Sun Wei

    2015-01-01

    Based on the study of supply chain (SC) and SC optimization in engineering projects, a mixed integer nonlinear programming (MINLP) optimization model is developed to minimize the total SC cost for international petrochemical en-gineering projects. A steam cracking project is selected and analyzed, from which typical SC characteristics in international engineering projects in the area of petrochemical industry are summarized. The MINLP model is therefore developed and applied to projects with detailed data. The optimization results are analyzed and compared by the MINLP model, indicat-ing that they are appropriate to SC management practice in engineering projects, and are consistent with the optimal price-effective strategy in procurement. As a result, the model could provide useful guidance to SC optimization of international engineering projects in petrochemical industry, and improve SC management by selecting more reliable and qualiifed part-ner enterprises in SC for the project.

  8. A New Cultivation-Evolution Technology of Accident Immune Function for a Petrochemical Enterprise

    Institute of Scientific and Technical Information of China (English)

    Yang Zhenhong; Zhang Xuhua; Wang Xiangyao; Wang Zhihu; Liu Yan; Zhang Xuan

    2007-01-01

    For the purpose of developing an immune function on production accidents in a petrochemical enterprise, a new cultivation-evolution approach of preventive mechanism is suggested by analyzing various factors relating to immune deficiency syndrome and by referring to immunity genetic algorithm and relevant concepts applied in medicine science. Accident-immunity system for highly hazardous petrochemical enterprise, which is made up of its productive system's Safety Organ and Safety Organization, is typically an evolution-cultivation progress for immune function, The new B immune cell is generated after several layers' screening, clone expanding, receptor editing, organizing in immune system of work accident in petrochemical enterprise. There is a B immune cell with high appetency and a manipulative function chain for accident-immunity. Taking the antigen of accidents in industry as the target function and the immune antibody as the solution, the authors carried out a computation diagram for prediction of appetency between the antigen and antibody.

  9. On Pluvial Compaction of Sand

    DEFF Research Database (Denmark)

    Jacobsen, Moust

    At the Institute of Civil Engineering in Aalborg model tests on dry sand specimens have been carried out during the last five years. To reduce deviations in test results, the sand laying technique has been carefully studied, and the sand mass spreader constructed. Preliminary results have been...

  10. Approximation of theoretical energy-saving potentials for the petrochemical industry using energy balances for 68 key processes

    NARCIS (Netherlands)

    Neelis, M.L.; Patel, M.K.; Bach, P.; Haije, W.G.; Blok, K.

    2007-01-01

    We prepared energy and carbon balances for 68 petrochemical processes in the petrochemical industry for Western Europe, the Netherlands and the world. We analysed the process energy use in relation to the heat effects of the chemical reactions and quantified in this way the sum of all energy inputs

  11. Opportunities and challenges at the interface between petrochemicals and refinery. The OMV view

    Energy Technology Data Exchange (ETDEWEB)

    Lichtscheidl, J. [OMV Refining and Marketing GmbH, Vienna (Austria)

    2007-07-01

    OMV's refineries have been integrated into petrochemicals since the first steam cracker came on line in 1970. The refineries in Schwechat, Burghausen and Romania, especially Arpechim, have significant petrochemical capacities. In 1998 PCD was merged with Borealis, a leading producer of high grade polymers. OMV's initial 25% stake in Borealis increased to 36 in 2007. The last years have seen major investments in Schwechat and Burghausen: Schwechat's cracker was expanded by approximately 150 KTA to a nominal 500 KTA of ethylene. And in Burghausen the revamp of the cracker has been combined with a metathesis unit in order to feed a new 330 KTA polypropylene plant. The polymer market is still growing. However, the bulk of investments to increase capacity are located in the Middle East and in the Asia-Pacific region, predominately in China. As more and more products from these regions find their way to Europe, the European petrochemicals industry faces fierce competition. The response is restructuring: the creation of Arkema (Total), the takeover of BP's petrochemical assets by INEOS, the disposal of Shell-BASF subsidiary Basell to Haldia Petrochemical and Accent Industries, and the transfer of Statoil's interest in Borealis to IPIC and OMV. And most recently, Basell's acquisition of Lyondell. Compared with competitors in the Middle East and the Asia-Pacific region, producers in Europe are burdened with serious disadvantages: fairly old, small units and high costs of labor, energy and raw materials. There is no single solution. OMV, however, will continue to follow the strategies that have been successful so far: - Ever closer integration of refining and petrochemicals; - Capturing market opportunities for profitable growth; -Remaining market orientated. (orig.)

  12. Petrochemicals may fare better as feed costs dip and processes are improved

    Energy Technology Data Exchange (ETDEWEB)

    Wett, T.

    1986-04-07

    With fewer projects under way and with lower feedstock costs, the U.S. and European petrochemical industries could fare better this year. According to a survey by the Chemical Manufacturers Association, chemical industry shipments were up nearly 3% in the U.S. in 1984, compared to a year earlier. However, basic petrochemical production did not share uniformly in that increase. Comparative polymer and aromatics output was on the positive side, as was output of acetic acid, acrylonitrile, and vinyl chloride. But production of many other materials, including ethylene and propylene, was lower than the year before. The drop in ethylene output is somewhat deceiving. Producers for the most part were running available capacity near the maximum. Demand held up well and inventories dropped throughout the year, falling from over 2 billion lb to about 970 million lb as of the end of December. U.S. demand for ethylene and propylene is expected to remain strong in 1986. Propylene, in particular, should benefit from a worldwide shift to lighter feedstock. Petrochemical demand was also strong worldwide, and U.S. exports were relatively good. The long term projection is for a drop in the U.S. balance of trade in petrochemicals for the rest of the decade. But 1985 saw mishaps at production facilities in Europe that actually prompted a healthy increase in imports from the U.S., particularly for high-density polyethylene. Still, the International Trade Commission sees a drop in the U.S. petrochemical trade balance from the current $10 billion to around $1.6 billion in 1990 as a result of the expansion of the petrochemical industry in developing countries. Falling oil prices have given European producers some breathing room, however. One producer feels that European plants based on naphtha can, at least for a time, be competitive with the Middle East's ethane-fed plants, when delivery costs are factored in.

  13. Spring 5 & reactive streams

    CERN Document Server

    CERN. Geneva; Clozel, Brian

    2017-01-01

    Spring is a framework widely used by the world-wide Java community, and it is also extensively used at CERN. The accelerator control system is constituted of 10 million lines of Java code, spread across more than 1000 projects (jars) developed by 160 software engineers. Around half of this (all server-side Java code) is based on the Spring framework. Warning: the speakers will assume that people attending the seminar are familiar with Java and Spring’s basic concepts. Spring 5.0 and Spring Boot 2.0 updates (45 min) This talk will cover the big ticket items in the 5.0 release of Spring (including Kotlin support, @Nullable and JDK9) and provide an update on Spring Boot 2.0, which is scheduled for the end of the year. Reactive Spring (1h) Spring Framework 5.0 has been released - and it now supports reactive applications in the Spring ecosystem. During this presentation, we'll talk about the reactive foundations of Spring Framework with the Reactor project and the reactive streams specification. We'll al...

  14. Use of Low-cost Adsorbents to Chlorophenols and Organic Matter Removal of Petrochemical Wastewater

    Directory of Open Access Journals (Sweden)

    Aretha Moreira de Oliveira

    2013-11-01

    Full Text Available The removal of 2,4 diclorophenol (2,4-DCF and 2,4,6 trichlorophenol (2,4,6 TCF present in  petrochemical wastewater was evaluated using low-cost adsorbents, such as chitin, chitosan and coconut shells. Batch studies showed that the absorption efficiency for 2,4 DCF and 2,4,6 TCF follow the order: chitosan > chitin > coconut shells. Langmuir and Freundlich models have been applied to experimental isotherms data, to better understand the adsorption mechanisms. Petrochemical wastewater treatment with fixed bed column system using chitinous adsorbents showed a removal of COD (75% , TOG (90% and turbidity (74-89%.

  15. Conditions and Characteristics of Coal Water Slurry Containing Petrochemicals Ignition by Hot Particle

    Directory of Open Access Journals (Sweden)

    Gal’chenko Nina K.

    2016-01-01

    Full Text Available Characteristics of CWS containing petrochemicals ignition by single hot particle in disk shape established experimentally. The main components of fuel composition are coal 45 %, water 45 %, used engine oil 10 %. The main parameters of local heat sources are: material – steel, diameter 10–12 mm, high 4–8 mm. As a result of experimental study is established limit (minimum conditions for ignition of CWS containing petrochemicals by hot particle and the impact of local heat source parameters on the main process characteristic – ignition delay time.

  16. CO{sub 2} Reuse in Petrochemical Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Jason Trembly; Brian Turk; Maruthi Pavani; Jon McCarty; Chris Boggs; Aqil Jamal; Raghubir Gupta

    2010-12-31

    To address public concerns regarding the consequences of climate change from anthropogenic carbon dioxide (CO{sub 2}) emissions, the U.S. Department of Energy's National Energy Technology Laboratory (DOE/NETL) is actively funding a CO{sub 2} management program to develop technologies capable of mitigating CO{sub 2} emissions from power plant and industrial facilities. Over the past decade, this program has focused on reducing the costs of carbon capture and storage technologies. Recently, DOE/NETL launched an alternative CO{sub 2} mitigation program focused on beneficial CO{sub 2} reuse to support the development of technologies that mitigate emissions by converting CO{sub 2} into valuable chemicals and fuels. RTI, with DOE/NETL support, has been developing an innovative beneficial CO{sub 2} reuse process for converting CO{sub 2} into substitute natural gas (SNG) by using by-product hydrogen (H{sub 2)-containing fuel gas from petrochemical facilities. This process leveraged commercial reactor technology currently used in fluid catalytic crackers in petroleum refining and a novel nickel (Ni)-based catalyst developed by RTI. The goal was to generate an SNG product that meets the pipeline specifications for natural gas, making the SNG product completely compatible with the existing natural gas infrastructure. RTI's technology development efforts focused on demonstrating the technical feasibility of this novel CO{sub 2} reuse process and obtaining the necessary engineering information to design a pilot demonstration unit for converting about 4 tons per day (tons/day) of CO{sub 2} into SNG at a suitable host site. This final report describes the results of the Phase I catalyst and process development efforts. The methanation activity of several commercial fixed-bed catalysts was evaluated under fluidized-bed conditions in a bench-scale reactor to identify catalyst performance targets. RTI developed two fluidizable Ni-based catalyst formulations (Cat-1 and Cat

  17. Sand hazards on tourist beaches.

    Science.gov (United States)

    Heggie, Travis W

    2013-01-01

    Visiting the beach is a popular tourist activity worldwide. Unfortunately, the beach environment is abundant with hazards and potential danger to the unsuspecting tourist. While the traditional focus of beach safety has been water safety oriented, there is growing concern about the risks posed by the sand environment on beaches. This study reports on the death and near death experience of eight tourists in the collapse of sand holes, sand dunes, and sand tunnels. Each incident occurred suddenly and the complete burial in sand directly contributed to the victims injury or death in each case report.

  18. PROCESSING OF MONAZITE SAND

    Science.gov (United States)

    Calkins, G.D.; Bohlmann, E.G.

    1957-12-01

    A process for the recovery of thorium, uranium, and rare earths from monazite sands is presented. The sands are first digested and dissolved in concentrated NaOH, and the solution is then diluted causing precipitation of uranium, thorium and rare earth hydroxides. The precipitate is collected and dissolved in HCl, and the pH of this solution is adjusted to about 6, precipitating the hydroxides of thorium and uranium but leaving the rare earths in solution. The rare earths are then separated from the solution by precipitation at a still higher pH. The thorium and uranium containing precipitate is redissolved in HNO/sub 3/ and the two elements are separated by extraction into tributyl phosphate and back extraction with a weakly acidic solution to remove the thorium.

  19. Spring integration essentials

    CERN Document Server

    Pandey, Chandan

    2015-01-01

    This book is intended for developers who are either already involved with enterprise integration or planning to venture into the domain. Basic knowledge of Java and Spring is expected. For newer users, this book can be used to understand an integration scenario, what the challenges are, and how Spring Integration can be used to solve it. Prior experience of Spring Integration is not expected as this book will walk you through all the code examples.

  20. Moving sand dunes

    CERN Document Server

    Sparavigna, Amelia Carolina

    2011-01-01

    In several desert areas, the slow motion of sand dunes can be a challenge for modern human activities and a threat for the survival of ancient places or archaeological sites. However, several methods exist for surveying the dune fields and estimate their migration rate. Among these methods, the use of satellite images, in particular of those freely available on the World Wide Web, is a convenient resource for the planning of future human settlements and activities.

  1. Pro Spring Integration

    CERN Document Server

    Lui, M; Chan, Andy; Long, Josh

    2011-01-01

    Pro Spring Integration is an authoritative book from the experts that guides you through the vast world of enterprise application integration (EAI) and application of the Spring Integration framework towards solving integration problems. The book is:. * An introduction to the concepts of enterprise application integration * A reference on building event-driven applications using Spring Integration * A guide to solving common integration problems using Spring Integration What makes this book unique is its coverage of contemporary technologies and real-world information, with a focus on common p

  2. Effect of gritting sand quality on road dust pollution

    OpenAIRE

    Babiuc, Octavian

    2016-01-01

    Pollution of air represents the contamination with matter that can affect both humanhealth and the environment. Road dust has been recognized as a dominant source ofparticulate matter and one of the factors that contributes to its development is the useof gritting sand. Gritting sand is being used during snowy winter conditions as atraction control method. During spring season, when snow and ice melt and surfacesdry out, and the influence of traffic, asphalt surface wear, particle ejection fr...

  3. Booming Sand Dunes

    Science.gov (United States)

    Vriend, Nathalie

    "Booming" sand dunes are able to produce low-frequency sound that resembles a pure note from a music instrument. The sound has a dominant audible frequency (70-105 Hz) and several higher harmonics and may be heard from far distances away. A natural or induced avalanche from a slip face of the booming dune triggers the emission that may last for several minutes. There are various references in travel literature to the phenomenon, but to date no scientific explanation covered all field observations. This thesis introduces a new physical model that describes the phenomenon of booming dunes. The waveguide model explains the selection of the booming frequency and the amplification of the sound in terms of constructive interference in a confined geometry. The frequency of the booming is a direct function of the dimensions and velocities in the waveguide. The higher harmonics are related to the higher modes of propagation in the waveguide. The experimental validation includes quantitative field research at the booming dunes of the Mojave Desert and Death Valley National Park. Microphone and geophone recordings of the acoustic and seismic emission show a variation of booming frequency in space and time. The analysis of the sensor data quantifies wave propagation characteristics such as speed, dispersion, and nonlinear effects and allows the distinction between the source mechanism of the booming and the booming itself. The migration of sand dunes results from a complicated interplay between dune building, wind regime, and precipitation. The morphological and morphodynamical characteristics of two field locations are analyzed with various geophysical techniques. Ground-penetrating radar images the subsurface structure of the dunes and reveal a natural, internal layering that is directly related to the history of dune migration. The seismic velocity increases abruptly with depth and gradually increases with downhill position due to compaction. Sand sampling shows local

  4. Sediment mathematical model for sand ridges and sand waves

    Institute of Scientific and Technical Information of China (English)

    LI Daming; WANG Xiao; WANG Xin; LI Yangyang

    2016-01-01

    A new theoretical model is formulated to describe internal movement mechanisms of the sand ridges and sand waves based on the momentum equation of a solid-liquid two-phase flow under a shear flow. Coupling this equation with two-dimensional shallow water equations and wave reflection-diffraction equation of mild slope, a two-dimensional coupling model is established and a validation is carried out by observed hydrogeology, tides, waves and sediment. The numerical results are compared with available observations. Satisfactory agreements are achieved. This coupling model is then applied to the Dongfang 1-1 Gas Field area to quantitatively predict the movement and evolution of submarine sand ridges and sand waves. As a result, it is found that the sand ridges and sand waves movement distance increases year by year, but the development trend is stable.

  5. Safety Culture Assessment in Petrochemical Industry: A Comparative Study of Two Algerian Plants

    Directory of Open Access Journals (Sweden)

    Assia Boughaba

    2014-06-01

    Conclusion: The comparison between the two petrochemical plants of the group Sonatrach confirms these results in which Company A, the managers of which are English and Norwegian, distinguishes itself by the maturity of their safety culture has significantly higher evaluations than the company B, who is constituted of Algerian staff, in terms of safety management practices and safety performance.

  6. A life-cycle inventory for the production of petrochemical intermediates in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Franke, M.; Berna, J.L.; Cavalli, L.; Renta, C.; Stalmans, M.; Thomas, H.

    1995-09-01

    The resource requirements and environmental emissions involved in the production of n-paraffins, n-olefins, benzene, ethylene and ethylene oxide from petrochemical feedstocks are presented. (orig./SR) [Deutsch] Der Rohstoffbedarf und die Umweltemissionen bei der Herstellung von n-Olefin, n-Paraffin, Benzen, Ethylen und Ethylenoxid auf der Basis petrochemischer Rohstoffe werden dargestellt. (orig./SR)

  7. Source pollution control program at the Camacari Petrochemical Complex: overall and individual improvements

    Energy Technology Data Exchange (ETDEWEB)

    Freire, P.A.; Neto, D.B.; Carvalho, D.M. [CETREL S.A., Camacari, BA (Brazil)

    1993-12-31

    Along with the technical progress experienced by the Camacari Petrochemical Complex in the last few years, new policies, following new worldwide trends, in pollution control and prevention became mandatory. This work describes some of these experiences as well as future perspectives. 3 refs., 2 fig., 13 tabs.

  8. Status and direction of waste minimization in the chemical and petrochemical industries

    Energy Technology Data Exchange (ETDEWEB)

    Englande Junior, A.J. [Tulane Univ., New Orleans, LA (United States). School of Public Health and Tropical Medicine

    1993-12-31

    This paper presents an evaluation of the status and direction of toxic/hazardous waste reduction in chemical and petrochemical industries from an international perspective. In almost all cases studied savings have resulted. The importance of pollution prevention by `clean technologies` instead of remediation is stressed. 6 refs., 4 tabs.

  9. Study of different pretreatments for reverse osmosis reclamation of a petrochemical secondary effluent.

    Science.gov (United States)

    Benito-Alcázar, C; Vincent-Vela, M C; Gozálvez-Zafrilla, J M; Lora-García, J

    2010-06-15

    Conventionally treated petrochemical wastewaters contain substantial quantities of hazardous pollutants. In addition, wastewater reuse is being enhanced as a consequence of the shortage of fresh water. Advanced petrochemical wastewater treatment for water reuse will reduce hazardous pollutants discharges as well as water consumption. Reverse osmosis is a suitable technology to obtain pure water. This work studies the adequacy of different pretreatments applied to a petrochemical secondary effluent to produce a suitable feeding for reverse osmosis treatment. The permeate obtained can be used in the petrochemical industry for different processes. In this work, several experiments (granulated activated carbon filtration, ultrafiltration, nanofiltration and granulated activated carbon filtration coupled with nanofiltration) were performed to improve the conventional pretreatment. Total organic carbon, chemical oxygen demand, turbidity and silt density index were used to evaluate water quality for reverse osmosis feeding. In granulated activated carbon filtration, all the measured parameters but silt density index indicated a good filtrate quality to feed reverse osmosis membranes. Although the ultrafiltration permeate obtained was suitable for reverse osmosis, nanofiltration and granulated activated carbon filtration coupled with NF provided a better effluent quality for reverse osmosis than the other pretreatments studied. Copyright 2010 Elsevier B.V. All rights reserved.

  10. Potential of best practice technology to improve energy efficiency in the global chemical and petrochemical sector

    NARCIS (Netherlands)

    Saygin, D.; Patel, M.K.; Worrell, E.; Tam, C.; Gielen, D.J.

    2011-01-01

    The chemical and petrochemical sector is by far the largest industrial energy user, accounting for 30% of the industry's total final energy use. However, due to its complexity its energy efficiency potential is not well understood. This article analyses the energy efficiency potential on a country l

  11. Multi-compartmental environmental surveillance of a petrochemical area: levels of micropollutants.

    Science.gov (United States)

    Nadal, Martí; Mari, Montse; Schuhmacher, Marta; Domingo, José L

    2009-02-01

    Since 2002, the chemical/petrochemical industrial zone of Tarragona County (Catalonia, Spain) is being annually monitored. As part of the environmental surveillance program, in this study the levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs), polycyclic aromatic hydrocarbons (PAHs), and metals (As, Cd, Cr, Hg, Mn, Pb and V) were determined in soil and vegetation samples collected in 4 areas of Tarragona County (chemical, petrochemical, urban/residential, and unpolluted). Moreover, the airborne concentrations of the same micropollutants were determined in each area. In soil samples, significant higher levels of PCNs and higher concentrations of PCDD/Fs and PAHs were found in the urban zone. PCDD/F levels in vegetation samples significantly decreased from 2002. The concentrations of Cr in soil samples, as well as V levels in vegetation samples collected in the vicinity of an oil refinery were significantly higher than those found in the unpolluted zones. A significant and progressive increase in V concentrations was also noted. The current results clearly indicate that the petrochemical industry is still being an important focus of inorganic pollution for the surrounding environment. In air, the higher amount of the 7 carcinogenic PAHs suggests a relatively greater impact on the petrochemical and urban areas. The temporal trend of the global pollution was also studied an Integral Risk Index was applied.

  12. Basic petrochemicals from natural gas, coal and biomass: energy use and CO2 emissions

    NARCIS (Netherlands)

    Ren, T.; Patel, M.K.|info:eu-repo/dai/nl/18988097X

    2009-01-01

    While high-value basic petrochemicals (HVCs) are mostly produced through conventional naphtha and ethane-based process routes, it is also possible to produce them through coal and biomass-based routes. In this paper, we compared these routes in terms of energy use and CO2 emissions per ton of HVCs.

  13. Petrochemicals from oil, natural gas, coal and biomass: production costs in 2030–2050

    NARCIS (Netherlands)

    Ren, T.; Daniëls, B.; Patel, M.K.|info:eu-repo/dai/nl/18988097X; Blok, K.|info:eu-repo/dai/nl/07170275X

    2009-01-01

    Methane, coal and biomass are being considered as alternatives to crude oil for the production of basic petrochemicals, such as light olefins. This paper is a study on the production costs of 24 process routes utilizing these primary energy sources. A wide range of projected energy prices in

  14. THE ASSESSMENT OF GROUND WATERS POLLUTION WITH PETROCHEMICALS AROUND CIVIL AVIATION ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Svitlana Madzhd

    2015-04-01

    Full Text Available In the article we determine the level of ground waters pollution with oil hydrocarbons around the enterprises of aviation machines exploitation and repair. The calculations of the sample size required to achieve 95 % confidence probability of petrochemicals content analysis have been resulted. The sanitary hygienic assessment of drinking water from the wells around the civil aviation enterprises has been conducted.

  15. Process intensification in the petrochemicals industry : Drivers and hurdles for commercial implementation

    NARCIS (Netherlands)

    Harmsen, Jan

    2010-01-01

    The process intensification technologies, reactive distillation, dividing wall column distillation (DWC) and reverse flow reactors (RFR) have been implemented at commercial scale in the petrochemical industry each more than 100 times. These technologies have been analysed with four drivers for innov

  16. China’s Petrochemical Industry during the’11the Five-Year Plan’

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Global oil price goes up while the domestic oil-based down-stream industry goes down in its operation. What will impact these players with the global oil-price hiking? The petrochemical global players gather in HK to address this biting challenge...

  17. Potential of best practice technology to improve energy efficiency in the global chemical and petrochemical sector

    NARCIS (Netherlands)

    Saygin, D.; Patel, M.K.; Worrell, E.; Tam, C.; Gielen, D.J.

    2011-01-01

    The chemical and petrochemical sector is by far the largest industrial energy user, accounting for 30% of the industry's total final energy use. However, due to its complexity its energy efficiency potential is not well understood. This article analyses the energy efficiency potential on a country

  18. Ni-B/TiO2 Amorphous Catalyst Used in Heavy Arenes of Petrochemicals Hydrogenation

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A supported Ni-B/TiO2 amorphous catalyst was prepared by impregnation and reduction. It was characterized by XRD, SAED, DSC, XPS, etc.. The catalytic activity of catalyst was measured through the hydrogenation of heavy arenes in petrochemicals for the first time.

  19. Ultrasonic and Thermal Pretreatments on Anaerobic Digestion of Petrochemical Sludge: Dewaterability and Degradation of PAHs.

    Directory of Open Access Journals (Sweden)

    Jun Zhou

    Full Text Available Effects of different pretreatment methods on sludge dewaterability and polycyclic aromatic hydrocarbons (PAHs degradation during petrochemical sludge anaerobic digestion were studied. Results showed that the total biogas production volume in the thermal pretreatment system was 4 and 5 times higher than that in the ultrasound pretreatment and in the control system, and the corresponding volatile solid removal efficiencies reached 28%, 15%, and 8%. Phenanthrene, paranaphthalene, fluoranthene, benzofluoranthene, and benzopyrene removal rates reached 43.3%, 55.5%, 30.6%, 42.9%, and 41.7%, respectively, in the thermal pretreatment system, which were much higher than those in the ultrasound pretreatment and in the control system. Moreover, capillary suction time (CST of sludge increased after pretreatment, and then reduced after 20 days of anaerobic digestion, indicating that sludge dewaterability was greatly improved after anaerobic digestion. The decrease of protein and polysaccharide in the sludge could improve sludge dewaterability during petrochemical sludge anaerobic digestion. This study suggested that thermal pretreatment might be a promising enhancement method for petrochemical sludge solubilization, thus contributing to degradation of the PAHs, biogas production, and improvement of dewaterability during petrochemical sludge anaerobic digestion.

  20. Petrochemicals from oil, natural gas, coal and biomass: production costs in 2030–2050

    NARCIS (Netherlands)

    Ren, T.; Daniëls, B.; Patel, M.K.; Blok, K.

    2009-01-01

    Methane, coal and biomass are being considered as alternatives to crude oil for the production of basic petrochemicals, such as light olefins. This paper is a study on the production costs of 24 process routes utilizing these primary energy sources. A wide range of projected energy prices in 2030–20

  1. Modeling the Spill in the Songhua River after the Explosion in the Petrochemical Plant in Jilin

    DEFF Research Database (Denmark)

    Fu, Wenjing; Fu, Huijin; Skøtt, Karen

    2008-01-01

    An explosion in a petrochemical plant in Jilin in the northeast of China on 13 November 13 2005 was responsible for the discharge of large quantities of benzene and nitrobenzene into Songhua River. This endangered the water supply of Harbin city and influenced the daily life for millions of people...

  2. INTEGRATION OF REFINING AND CHEMICAL INDUSTRY ——Development Strategy for Petrochemicals in New Century

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    With the rapid progress of the national economy in China, petroleum refining and petrochemical industry have grown with leaps and bounds correspondingly in 1990s. The amount of crude oil processed reached 152.39 Mt in 1998, 1.13 times that in 1993.   The refining capacity ranks the fourth in the world. Ethylene production was 3.77 Mt in 1998, 1.87 times that in 1993. The capacity of ethylene ranks the sixth in the world.   It can be expected that the petrochemical industry in China will develop faster than the refining in 21st century. The basic reason therefore is that petrochemical products can not satisfy the demand of domestic market by far so that there should be a great import. In 1998, for example, imported synthetic resin was as much as 11.71 Mt, of which five bulk plastics were 8.03 Mt. Imported synthetic rubber, synthetic fiber and fertilizer were 0.474 Mt, 1.519 Mt and 1392 Mt, respectively. The situation showed that the domestic market in China has an enormous demand for ethylene, i.e. the total demand for ethylene in 2010 is estimated as 17~18 Mt. Even if the production capacity could be 10 Mt, the self-supporting ratio will only be about 55.5%.      Please read the details of this paper in the journal of China Petroleum Processing & Petrochemical Technology.

  3. [Occupational hazard risk assessment of workers exposed to benzene in a petrochemical enterprise in Shanghai, China].

    Science.gov (United States)

    Lu, Y; Huang, J S; Zhou, Y L; Sun, P

    2016-10-20

    Objective: To investigate the exposure to benzene, methylbenzene, and dimethylbenzene in workers in a petrochemical enterprise in Shanghai, China, and to conduct occupational hazard risk assessment. Methods: The environmental monitoring data on benzene series in the workplace of this petrochemical enterprise from 2010 to 2014 were collected, as well as workers' general status. The inhalation risk assessment model developed by United States Environmental Protection Agency (EPA) was used for risk assessment to determine the occupational hazard risk level of benzene, methylbenzene, and dimethylbenzene. Results: The pass rate of the monitoring concentration of benzene, methylbenzene, and dimethylbenzene in the workplace of this petrochemical enterprise was 100%. The results of the EPA model showed that benzene had a high carcinogenic risk, benzene and dimethylbenzene had a high non-carcinogenic risk, and methylbenzene had a low non-carcinogenic risk. Conclusion: The workers exposed to benzene in this petrochemical enterprise have a high health risk, and the EPA model can be used for occupational hazard risk assessment in chemical industry.

  4. Comparison of the sustainability metrics of the petrochemical and biomass-based routes to methionine

    NARCIS (Netherlands)

    Sanders, J.P.M.; Sheldon, R.A.

    2015-01-01

    Sustainability metrics, based on material efficiency, energy input, land use and costs, of three processesfor the manufacture of methionine are compared. The petrochemical process affords dl-methionine whilethe two biomass-based routes afford the l-enantiomer. From the point of view of the major

  5. Ultrasonic and Thermal Pretreatments on Anaerobic Digestion of Petrochemical Sludge: Dewaterability and Degradation of PAHs

    Science.gov (United States)

    Zhou, Jun; Xu, Weizhong; Wong, Jonathan W. C.; Yong, Xiaoyu; Yan, Binghua; Zhang, Xueying; Jia, Honghua

    2015-01-01

    Effects of different pretreatment methods on sludge dewaterability and polycyclic aromatic hydrocarbons (PAHs) degradation during petrochemical sludge anaerobic digestion were studied. Results showed that the total biogas production volume in the thermal pretreatment system was 4 and 5 times higher than that in the ultrasound pretreatment and in the control system, and the corresponding volatile solid removal efficiencies reached 28%, 15%, and 8%. Phenanthrene, paranaphthalene, fluoranthene, benzofluoranthene, and benzopyrene removal rates reached 43.3%, 55.5%, 30.6%, 42.9%, and 41.7%, respectively, in the thermal pretreatment system, which were much higher than those in the ultrasound pretreatment and in the control system. Moreover, capillary suction time (CST) of sludge increased after pretreatment, and then reduced after 20 days of anaerobic digestion, indicating that sludge dewaterability was greatly improved after anaerobic digestion. The decrease of protein and polysaccharide in the sludge could improve sludge dewaterability during petrochemical sludge anaerobic digestion. This study suggested that thermal pretreatment might be a promising enhancement method for petrochemical sludge solubilization, thus contributing to degradation of the PAHs, biogas production, and improvement of dewaterability during petrochemical sludge anaerobic digestion. PMID:26327510

  6. 78 FR 7442 - Accreditation and Approval of Chemical and Petrochemical Inspections, LP, as a Commercial Gauger...

    Science.gov (United States)

    2013-02-01

    ... SECURITY U.S. Customs and Border Protection Accreditation and Approval of Chemical and Petrochemical Inspections, LP, as a Commercial Gauger and Laboratory AGENCY: U.S. Customs and Border Protection, Department... and Accredited Laboratories Manager, Laboratories and Scientific Services, U.S. Customs and...

  7. Spring A Developer's Notebook

    CERN Document Server

    Tate, Bruce A

    2009-01-01

    This no-nonsense book quickly gets you up to speed on the new Spring open source framework. Favoring examples and practical application over theory, Spring: A Developer's Notebook features 10 code-intensive labs that'll reveal the many assets of this revolutionary, lightweight architecture. In the end, you'll understand how to produce simple, clean, and effective applications.

  8. Mockito for Spring

    CERN Document Server

    Acharya, Sujoy

    2015-01-01

    If you are an application developer with some experience in software testing and want to learn more about testing frameworks, then this technology and book is for you. Mockito for Spring will be perfect as your next step towards becoming a competent software tester with Spring and Mockito.

  9. Masters of the springs

    DEFF Research Database (Denmark)

    Laursen, Steffen

    2010-01-01

    led to a number of insights into the social organization of the mound cemeteries that will be presented in the paper. It is obvious that there existed a close spatial relation between freshwater springs and the compact mounds cemeteries that emerged c.2050 BC. The mound cemeteries appear to have been...... flanked by villages that relied on these water recourses for agricultural production. The springs emerged in the zone separating the cemeteries from the settlements. The freshwater springs were actively incorporated into the religious landscape of the dead, by consistently erecting mounds of a particular...... high status type right above the head of each spring. These tombs of the masters of the springs are distinguished by their larger size and vertical shaft entrance. It is argued that this particular strategy of power was employed after population growth had intensified conflicts over the rights...

  10. Dual application of duckweed and azolla plants for wastewater treatment and renewable fuels and petrochemicals production.

    Science.gov (United States)

    Muradov, Nazim; Taha, Mohamed; Miranda, Ana F; Kadali, Krishna; Gujar, Amit; Rochfort, Simone; Stevenson, Trevor; Ball, Andrew S; Mouradov, Aidyn

    2014-02-28

    Shortages in fresh water supplies today affects more than 1 billion people worldwide. Phytoremediation strategies, based on the abilities of aquatic plants to recycle nutrients offer an attractive solution for the bioremediation of water pollution and represents one of the most globally researched issues. The subsequent application of the biomass from the remediation for the production of fuels and petrochemicals offers an ecologically friendly and cost-effective solution for water pollution problems and production of value-added products. In this paper, the feasibility of the dual application of duckweed and azolla aquatic plants for wastewater treatment and production of renewable fuels and petrochemicals is explored. The differences in absorption rates of the key wastewater nutrients, ammonium and phosphorus by these aquatic macrophytes were used as the basis for optimization of the composition of wastewater effluents. Analysis of pyrolysis products showed that azolla and algae produce a similar range of bio-oils that contain a large spectrum of petrochemicals including straight-chain C10-C21 alkanes, which can be directly used as diesel fuel supplement, or a glycerin-free component of biodiesel. Pyrolysis of duckweed produces a different range of bio-oil components that can potentially be used for the production of "green" gasoline and diesel fuel using existing techniques, such as catalytic hydrodeoxygenation. Differences in absorption rates of the key wastewater nutrients, ammonium and phosphorus by different aquatic macrophytes can be used for optimization of composition of wastewater effluents. The generated data suggest that the composition of the petrochemicals can be modified in a targeted fashion, not only by using different species, but also by changing the source plants' metabolic profile, by exposing them to different abiotic or biotic stresses. This study presents an attractive, ecologically friendly and cost-effective solution for efficient bio

  11. Compressive behavior of fine sand.

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Bradley E. (Air Force Research Laboratory, Eglin, FL); Kabir, Md. E. (Purdue University, West Lafayette, IN); Song, Bo; Chen, Wayne (Purdue University, West Lafayette, IN)

    2010-04-01

    The compressive mechanical response of fine sand is experimentally investigated. The strain rate, initial density, stress state, and moisture level are systematically varied. A Kolsky bar was modified to obtain uniaxial and triaxial compressive response at high strain rates. A controlled loading pulse allows the specimen to acquire stress equilibrium and constant strain-rates. The results show that the compressive response of the fine sand is not sensitive to strain rate under the loading conditions in this study, but significantly dependent on the moisture content, initial density and lateral confinement. Partially saturated sand is more compliant than dry sand. Similar trends were reported in the quasi-static regime for experiments conducted at comparable specimen conditions. The sand becomes stiffer as initial density and/or confinement pressure increases. The sand particle size become smaller after hydrostatic pressure and further smaller after dynamic axial loading.

  12. Sand dollar sites orogenesis

    Science.gov (United States)

    Amos, Dee

    2013-04-01

    The determinology of the humble sand dollars habitat changing from inception to the drastic evolution of the zone to that of present day. Into the cauldron along the southern Californian 'ring of fire' lithosphere are evidence of geosynclinals areas, metasedimentary rock formations and hydrothermal activity. The explanation begins with 'Theia' and the Moon's formation, battles with cometary impacts, glacial ages, epochs with evolutionary bottlenecks and plate tectonics. Fully illustrated the lecture includes localised diagrams and figures with actual subject photographic examples of plutonic, granitic, jade and peridodite. Finally, the origins of the materials used in the lecture are revealed for prosecution by future students and the enjoyment of interested parties in general.

  13. Sand Storms Trigger Alarm

    Institute of Scientific and Technical Information of China (English)

    LI LI

    2010-01-01

    @@ After an unusually humid winter with at least 10 snowfalls in Beijing, a severe andstorm blown by strong winds bringing with it thousands of tons of desert sand took many residents of the city by surprise.On the morning of March 20, Beijingers woke up to see clouds of yellow dust in the air and a sky that was an ominous orange in color.The loose soil and dust that had traveled htmdreds of miles from deserts in Mongolia and China's northwest blanketed Beijing's streets, covering parked vehicles, bikes, roofs and even plant life,as well as making its way into people's homes.

  14. Fortune Cookie Sand Dunes

    Science.gov (United States)

    2003-01-01

    MGS MOC Release No. MOC2-432, 25 July 2003This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a field of small barchan sand dunes in the north polar region near 71.7oN, 51.3oW. Some of them are shaped like fortune cookies. The message these dunes provide: winds blow through this region from the lower right toward the upper left. The steep slip face slopes of these dunes, which point toward the upper left, indicate the wind direction. The scene is illuminated by sunlight from the upper right. The image is 3 km (1.9 mi) wide.

  15. A family of sand automata

    CERN Document Server

    Faulkner, Nicholas

    2012-01-01

    We study some dynamical properties of a family of two-dimensional cellular automata: those that arise from an underlying one dimensional sand automaton whose local rule is obtained using a latin square. We identify a simple sand automaton G whose local rule is algebraic, and classify this automaton as having equicontinuity points, but not being equicontinuous. We also show it is not surjective. We generalise some of these results to a wider class of sand automata.

  16. Dilatometric Characterization of Foundry Sands

    Directory of Open Access Journals (Sweden)

    M. Břuska

    2012-04-01

    Full Text Available The goal of this contribution is summary of physical – chemistry properties of usually used foundry silica and no – silica sands in Czech foundries. With the help of dilatometry analysis theoretical assumptions of influence of grain shape and size on dilatation value of sands were confirmed. Determined was the possibility of dilatometry analysis employment for preparing special (hybrid sands with lower and/or more linear character of dilatation.

  17. Regulation of whole field soil-plastic mulching with bunch planting and whole field sand mulching with flat planting on soil moisture and yield of spring wheat in semiarid dryland areas%旱地全膜覆土穴播和全沙覆盖平作对小麦田土壤水分和产量的调节机理

    Institute of Scientific and Technical Information of China (English)

    宋婷; 王红丽; 陈年来; 张绪成

    2014-01-01

    Whole field soil-plastic mulching with bunch planting is a firstly spreading wheat cultivation technique in Gansu Province. Domestic studies have shown significant increases in yields of wheat, flax and other crops under this cultivation mode. Previous researches mainly focused on the cultivation techniques and yield effects, with little documentation of the mechanism of yield increase. To address this knowledge gap, field experiments were conducted to explore the regulation of whole field soil-plastic mulching with bunch planting (PM) and whole field sand mulching with flat planting (SM) on soil moisture content and yield of spring wheat in semiarid dryland areas. The results showed that compared to uncovered and flat planting (CK), PM and SM significantly improved soil moisture conditions in the 0-40 cm soil layer. This was especially noticeable in dry years, which supported early growth of wheat by enhancing water use in the 0-200 cm soil layer after wheat emergence. The maximum soil water used by wheat under PM was from 60-80 cm and that under both SM and CK was from 40-60 cm in the first year (median water year) of wheat cultivation. In the second year (less water year) of cultivation, the maximum soil water used under PM was from 120-180 cm and that under both SM and CK was from 60-80 cm. After two years of continuous cultivation, the depth of used water under PM increased from 120 cm to 200 cm, that under SM increased from 120 cm to 140 cm and that under CK remained unchanged. Leisure efficiency of PM was the highest, followed by SM and then CK. Leisure efficiency of each treatment decreased with increasing years of wheat cultivation. In summary, PM and SM improved the moisture environment of the soil in early wheat growth period, promoted water use after wheat emergence and accelerated the use of deep soil moisture. Compared with CK, PM and SM increased wheat yield by 48.77%-815.79% and 49.41%-702.24%, respectively. But with increasing years of cultivation

  18. Triaxial tests in Fontainebleau sand

    DEFF Research Database (Denmark)

    Latini, Chiara; Zania, Varvara

    2016-01-01

    The purpose of this internal report is to examine the influence of relative density on the strength and deformation characteristics of Fontainebleau sand. Compression triaxial tests were performed on saturated sand samples with different densities and initial confining pressure. Note that the tes......The purpose of this internal report is to examine the influence of relative density on the strength and deformation characteristics of Fontainebleau sand. Compression triaxial tests were performed on saturated sand samples with different densities and initial confining pressure. Note...... that the testing procedure and the data processing were carried out according to the specifications of ETCS-F1.97....

  19. Western Gas Sands Project status report

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, C.H.

    1978-09-30

    The status of government sponsored projects undertaken to increase gas production from low-permeability gas sands of the western United States during August 1978 is summarized. Background information is given in the September 1977 Status Report, NVO/0655-100. One of the largest massive Hydraulic Fracture (MHF) treatment to date was performed on Gas Producing Enterprises Well No. CIGE 2-29. C.H. Atkinson, Western Gas Sands Project (WGSP) Manager and D.C. Bleakly, CER Corporation were observers. Oriented coring operations on the Mitchell Energy well, Muse-Duke No. 1 were observed by Atkinson and Bleakly near Mexia, Texas. The Fourth Annual Department of Energy Symposium on Enhanced Oil and Gas Recovery and Improved Drilling Methods was held on August 29-31, 1978 in Tulsa, Oklahoma. The USGS continued geological and geophysical studies in the four primary study areas. Low-level oblique photography of Tertiary and Cretaceous rocks exposed in the Rock Springs Uplift area was completed, and core from the J.C. Paine well in Montana was sampled for petrograhic analysis. Bartlesville Energy Technology Center continued work on the improved pressure coring system and anticipates completion of the project by September 30, 1978. Preliminary work began on the Parametric Analysis of MHF Test Data, an Engineering Study of Western Gas Sands, by Intercomp. The National Laboratories, funded by DOE are continuing their work in the area of research and development. The emphasis is on instrumentation systems, rock mechanics, mathematical modeling, and data analysis. The Mitchell Energy well, Muse Duke No. 1, has reached total depth and was logged on August 31, 1978. The DOE well test facility was moved from the RB-MHF 3 well in Colorado to Vernal, Utah for trailer modifications and checkout.

  20. The Spring Festival

    Institute of Scientific and Technical Information of China (English)

    萧平

    2005-01-01

    Everybody likes to have the Spring Festival, so do I.Because during the Spring Festival there are many good things to eat, to drink and to play with. During the last Spring Festival I had a very good time. On the eve of the festival, our family had a big dinner. My uncle, aunt and cousin came back from Canada to celebrate(庆祝) my grandma's eightieth birthday. They also brought many beautiful gifts to me. My cousin and I watched TV and played games the whole night, while the grown-ups had a long talk. I didn't know when I fell asleep.

  1. Green Chemistry, Green Engineering and Eco-Innovation Towards a More Sustainable Petrochemical Industry: Determinants of Brazilian Petrochemical Companies´ Engagement in GCE-Based Eco-Innovation Processes

    NARCIS (Netherlands)

    P.A. Freire da Silva (Paulo)

    2014-01-01

    markdownabstract__Abstract__ It is the general wisdom, within the petrochemical industrial sector, that technological changes, for the development of cleaner products, processes and services, is a basic requirement for companies to achieve advanced states of environmental and economic sustainabilit

  2. Green Chemistry, Green Engineering and Eco-Innovation Towards a More Sustainable Petrochemical Industry: Determinants of Brazilian Petrochemical Companies´ Engagement in GCE-Based Eco-Innovation Processes

    NARCIS (Netherlands)

    P.A. Freire da Silva (Paulo)

    2014-01-01

    markdownabstract__Abstract__ It is the general wisdom, within the petrochemical industrial sector, that technological changes, for the development of cleaner products, processes and services, is a basic requirement for companies to achieve advanced states of environmental and

  3. Complexity confers stability: Climate variability, vegetation response and sand transport on longitudinal sand dunes in Australia's deserts

    Science.gov (United States)

    Hesse, Paul P.; Telfer, Matt W.; Farebrother, Will

    2017-04-01

    The relationship between antecedent precipitation, vegetation cover and sand movement on sand dunes in the Simpson and Strzelecki Deserts was investigated by repeated (up to four) surveys of dune crest plots (≈25 × 25 m) over a drought cycle (2002-2012) in both winter (low wind) and spring (high wind). Vegetation varied dramatically between surveys on vegetated and active dune crests. Indices of sand movement had significant correlations with vegetation cover: the depth of loose sand has a strong inverse relationship with crust (cyanobacterial and/or physical) while the area covered by ripples has a strong inverse relationship with the areal cover of vascular plants. However, the relationship between antecedent rainfall and vegetation cover was found to be complex. We tentatively identify two thresholds; (1) >10 mm of rainfall in the preceding 90 days leads to rapid and near total cover of crust and/or small plants 400 mm of rainfall in the preceding three years leads to higher cover of persistent and longer-lived plants >50 cm tall. These thresholds were used to predict days of low vegetation cover on dune crests. The combination of seasonality of predicted bare-crest days, potential sand drift and resultant sand drift direction explains observed patterns of sand drift on these dunes. The complex vegetation and highly variable rainfall regime confer meta-stability on the dunes through the range of responses to different intervals of antecedent rainfall and non-linear growth responses. This suggests that the geomorphic response of dunes to climate variation is complex and non-linear.

  4. Climatology of yellow sand (Asian sand, Asian dust or Kosa)in East Asia

    Institute of Scientific and Technical Information of China (English)

    Masatoshi; Yoshino

    2002-01-01

    In order to study climatology of yellow sand (Asian sand, Asian dust or Kosa) in EastAsia, secular fluctuation in China, Korea and Japan in the recent 30 years was presented. Thenumber of days with sand-dust storm at five stations in China-Hotan, Zhangye, Minqin, Jurhand Beijing, decreases a lot at the former three stations, but changed little at the latter two stations.Suggesting that the recent global warming is more evident in Xinjiang and Gansu, where the fre-quency of cold air invasions from the higher latitudes is decreasing. But, the eastern parts ofMongolia, inner Mongolia, and North China encounter stronger cyclones in early spring as a resultof global warming. These cyclones bring cold air from higher latitudes, causing severe duststorms. Secular variation in the annual days with sand-dust storms in China and Kosa days in Ko-rea and Japan show a parallel change with higher frequency from 1975 to 1985. This may be re-lated to the higher frequency of La Nina years. However, different tendency was shown in theperiod from 1986 to 1996. Since 1996 or 1997, a sharp increase is clear, which may be caused bythe developed cyclones in East Asia as well as human activities, and stronger land degradationunder La Nina conditions. Anomalies of the total number of stations with Kosa days were dis-cussed in accordance with some synoptic meteorological conditions such as the differences be-tween Siberian anticyclone and Aleutian cyclone center at 500 hPa level during the previous winter.

  5. Fish Springs pond snail

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Communication scenario between the branch of Listing and Recovery, Fish and Wildlife Enhancement, and Fish Springs National Wildlife Refuge (NWR), in regards to the...

  6. Spring Bottom Trawl Survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The standardized NEFSC Spring Bottom Trawl Survey was initiated in 1968 and covered an area from Cape Hatteras, NC, to Nova Scotia, Canada, at depths >27m....

  7. Learning Spring application development

    CERN Document Server

    Soni, Ravi Kant

    2015-01-01

    This book is intended for those who are interested in learning the core features of the Spring Framework. Prior knowledge of Java programming and web development concepts with basic XML knowledge is expected.

  8. Harbingers of Spring

    Science.gov (United States)

    Serrao, John

    1976-01-01

    Emphasizing the spring migration of frogs, toads, and salamanders to their watery breeding sites, this article presents information on numerous amphibians and suggests both indoor and outdoor educational activities appropriate for elementary and/or early secondary instruction. (JC)

  9. The Springs at Pipe Spring National Monument, Arizona (pisp_springs)

    Data.gov (United States)

    National Park Service, Department of the Interior — This is an Arc/Info coverage consisting of 5 points representing the springs, natural and man-made, at Pipe Spring National Monument, Arizona. The springs were...

  10. A sand wave simulation model

    NARCIS (Netherlands)

    Nemeth, A.A.; Hulscher, S.J.M.H.; Damme, van R.M.J.

    2003-01-01

    Sand waves form a prominent regular pattern in the offshore seabeds of sandy shallow seas. A two dimensional vertical (2DV) flow and morphological numerical model describing the behaviour of these sand waves has been developed. The model contains the 2DV shallow water equations, with a free water su

  11. Regeneration of dredged sand waves

    NARCIS (Netherlands)

    Hulscher, Suzanne J.M.H.; Knaapen, Michiel; Scholl, Olaf; Scholl, O.; Trenteseaux., A.; Garlan, T.

    2000-01-01

    Sand waves form a wavy pattern in the offshore sandy seabed. Since their crests reduce the navigability, it is important to know their evolution. A simple model is presented to estimate the recovery of sand wave amplitudes. This model is partially based on the similarity with sea ripples and

  12. Namibia : triaxial test on sand

    DEFF Research Database (Denmark)

    Steenfelt, Jørgen S.; Jacobsen, Kim P.

    In connection with a harbour project the friction angle of a fine sand is required. On Friday 13 March 1998 the Danish Geotechnical Institute (DGI) delivered app. 2.5 kg sand for testing at the Geotechnical Engineering Laboratory, Aalborg University. The present Data Report summarises the results...

  13. Sand swimming lizard: sandfish

    CERN Document Server

    Maladen, Ryan D; Kamor, Adam; Goldman, Daniel I

    2009-01-01

    We use high-speed x-ray imaging to reveal how a small (~10cm) desert dwelling lizard, the sandfish (Scincus scincus), swims within a granular medium [1]. On the surface, the lizard uses a standard diagonal gait, but once below the surface, the organism no longer uses limbs for propulsion. Instead it propagates a large amplitude single period sinusoidal traveling wave down its body and tail to propel itself at speeds up to ~1.5 body-length/sec. Motivated by these experiments we study a numerical model of the sandfish as it swims within a validated soft sphere Molecular Dynamics granular media simulation. We use this model as a tool to understand dynamics like flow fields and forces generated as the animal swims within the granular media. [1] Maladen, R.D. and Ding, Y. and Li, C. and Goldman, D.I., Undulatory Swimming in Sand: Subsurface Locomotion of the Sandfish Lizard, Science, 325, 314, 2009

  14. 2010 oil sands performance report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    With the depletion of traditional energy resources and the rising demand for energy, oil sands have become an important energy resource for meeting energy needs. Oil sands are a mixture of water, sand, clay and bitumen which is recovered either through open pit mining or in situ drilling techniques. The bitumen is then converted into syncrude or sold to refineries for the production of gasoline, diesel or other products. Shell has oil sands operations in Alberta and the aim of this report is to present its 2010 performance in terms of CO2, water, tailings, land, and reclamation and engagement. This document covers several of Shell's operations in the Muskeg River and Jackpine mines, Scotford upgrader, Peace River, Orion, Seal, Cliffdale and Chipmunk. It provides useful information on Shell's oil sands performance to governments, environmental groups, First Nations, local communities and the public.

  15. Sand harm in taklimakan Desert highway and sand control

    Institute of Scientific and Technical Information of China (English)

    HANZhiwen; WANGTao; SUNQingwei; DONGZhibao; WANGXunming

    2003-01-01

    Reputed as a wonderful achievement of the world’s highway construction history,the Taklimakan Desert highway is nor facing serious sand drift encroachment problems due to its 447-km-long passage of sand sea consisting of crescent dunes,barchan chains,compound transverse dune ridges and complex megadunes.To solve some technical problems in the protection of the highway from sang drift encroachment,desert experts have been conducting the theoretical and applied studies on sand movement laws;causes,severities and time-space differentiation of sand drift damages;and control ways including mechanical,chemical and biological measures.In this paper the authors give an overall summry on the research contents and recent progress in the control of sand drift damages in China and hold that the theoretical researc results and practices in the prevention of sand drift encroachment on the cross-desert highway represnt a breakthrough and has an cpoch-making significance.Since the construction of protective forest along the cross-desert highway requires large amount of ground water,what will be its environmental consequence and whether it can effectively halt sand drift encroachment on the highway forever are the questions to be studied urgently.

  16. Structural characteristics and oil-removal mechanisms of the adsorbents made from petrochemical sludge

    Institute of Scientific and Technical Information of China (English)

    LIU Jian-bin; SANG Yi-ming; TAN Wen-jie; HE Xu-wen; LI Fa-sheng

    2004-01-01

    A new type of carbon-inorganic absorbent with good oil-removing performance is prepared by sintering and activating petrochemical sludge. Of the absorbents prepared by three different methods (non-activated, vapor /840 ℃/6 h, CO2/1 000 ℃/2 h), the one prepared by the second method is the best in oil-removing, which can remove 60% of oil from petrochemical wastewater with a concentration of 76.42 mg/L. X-ray Diffraction (XRD) analysis shows that the constituents of the adsorbents are basically similar to those of inorganic granulating materials, such as SiO2, Al2O3, orthoclase feldspar, iron ore, etc. Composition analysis reveals that the activated absorbent has a large specific surface area with a high carbon content in activated compositions and a good oil-removing capability.

  17. Production of Polyhydroxybutyrate by Bacillus axaraqunsis BIPC01 using Petrochemical Wastewater as Carbon Source

    Directory of Open Access Journals (Sweden)

    Nasim Mayeli

    2015-08-01

    Full Text Available The aim of this study was to use petrochemical wastewater as the source of carbon for the production of polyhydroxyalkanoates (PHA in an effort to decrease its cost of production. For this purpose, PHA producing bacteria were isolated from the petrochemical wastewater of Bandar Imam, Iran. The purified colonies were screened for PHA by Sudan Black B and Nile Blue A staining. Among positively stained bacteria, the best PHA producer was selected on the basis of cell growth, PHA content and the monomer composition of PHA. The phenotypic and genotypic identification this isolate showed it to be Bacillus axaraqunsis. The PHA was produced at a cell density of about 9.46 g/l of maximum concentration of 6.33g/l l, corresponding to 66% of cell dry weight. These results showed that B. axaraqunsis BIPC01 could be a potent PHA producer using wastewater for industrial purpose and simultaneously reducing the environmental pollution.

  18. Trends in high performance compressors for petrochemical and natural gas industry in China

    Science.gov (United States)

    Zhao, Yuanyang; Li, Liansheng

    2015-08-01

    Compressors are the key equipment in the petrochemical and natural gas industry system. The performance and reliability of them are very important for the process system. The application status of petrochemical & natural gas compressors in China is presented in this paper. The present status of design and operating technologies of compressors in China are mentioned in this paper. The turbo, reciprocating and twin screw compressors are discussed. The market demands for different structure compressors in process gas industries are analysed. This paper also introduces the research and developments for high performance compressors in China. The recent research results on efficiency improvement methods, stability improvement, online monitor and fault diagnosis will also be presented in details.

  19. A study on the effects of subsidies on market value: Evidence from Petrochemical and steel industries

    Directory of Open Access Journals (Sweden)

    Batool Norouzi

    2015-04-01

    Full Text Available Iran’s 4th development plan has enrolled the federal government to increase energy prices and remove any subsidies paid to energy sector in an attempt to increase productivity and provide better social welfare. It is, therefore, important to investigate the effects of the law on different industries and the subsequent effects on economic growth. This study investigates the impacts of subsidies on the market value of listed companies in Tehran Stock Exchange in Petrochemical and Steel industries. The study selects two firms, Esfahan's Mobarakeh Steel Company and Fanavaran Petrochemical Co. using Auto Regressive Distributed Lags (ARDL over the period 2008-2013. The results have indicated that there was a meaningful relationships between removal of subsidies and market value of the firms.

  20. Geologic map of Great Sand Dunes National Park, Colorado

    Science.gov (United States)

    Madole, Richard F.; VanSistine, D. Paco; Romig, Joseph H.

    2016-10-20

    Geologic mapping was begun after a range fire swept the area of what is now the Great Sand Dunes National Park in April 2000. The park spans an area of 437 square kilometers (or about 169 square miles), of which 98 percent is blanketed by sediment of Quaternary age, the Holocene and Pleistocene Epochs; hence, this geologic map of the Great Sand Dunes National Park is essentially a surficial geologic map. These surficial deposits are diverse and include sediment of eolian (windblown), alluvial (stream and sheetwash), palustrine (wetlands and marshes), lacustrine (lake), and mass-wasting (landslides) origin. Sediment of middle and late Holocene age, from about 8,000 years ago to the present, covers about 80 percent of the park.Fluctuations in groundwater level during Holocene time caused wetlands on the nearby lowland that bounds the park on the west to alternately expand and contract. These fluctuations controlled the stability or instability of eolian sand deposits on the downwind (eastern) side of the lowland. When groundwater level rose, playas became lakes, and wet or marshy areas formed in many places. When the water table rose, spring-fed streams filled their channels and valley floors with sediment. Conversely, when groundwater level fell, spring-fed streams incised their valley floors, and lakes, ponds, and marshes dried up and became sources of windblown sand.Discharge in streams draining the west flank of the Sangre de Cristo Range is controlled primarily by snowmelt and flow is perennial until it reaches the mountain front, beyond which streams begin losing water at a high rate as the water soaks into the creek beds. Even streams originating in the larger drainage basins, such as Sand and Medano Creeks, generally do not extend much more than 4 km (about 2.5 miles) beyond where they exit the mountains.The Great Sand Dunes contain the tallest dunes (maximum height about 750 feet, or 230 m) in North America. These dunes cover an area of 72 square kilometers

  1. Waste minimization promotes biophysical treatment of complex petrochemical wastes in Israel

    Energy Technology Data Exchange (ETDEWEB)

    Lebel, A. [Invirotreat International Ltd., Fulleron, CA (United States); Raveh, A. [Raveh Ecology Ltd., Haifa (Israel)

    1993-12-31

    This work describes a full-scale waste treatment system which was put into operation in a petrochemical manufacturing plant in Israel for the purpose of detoxifying its complex organic waste stream. The treatment plant design incorporates an innovative waste management approach to accommodate the limited space allocated for the facility. Initial performance data indicate a high efficient inorganic waste reduction. 4 refs., 6 figs., 2 tabs.

  2. Economic Performance of China's Oil and Petrochemical Industry in First Quarter

    Institute of Scientific and Technical Information of China (English)

    Liu Fen

    2008-01-01

    @@ International oil price continued souring in the first quarter of 2008. It was bouncing up and down above $100/barrel and even getting close to $120/barrel by the end of April. Products related to energy and resources all responded with higher prices, triggering a general increase in cost of petroleum and petrochemical industry. World's economy was seriously affected by USA's subprime lending crisis, weakening US dollar, sullen stock markets,and etc, major economies lowered their expectations for economic growth rate.

  3. Effect of metal ions and petrochemicals on bioremediation of chlorpyrifos in aerobic sequencing batch bioreactor (ASBR).

    Science.gov (United States)

    Khalid, Saira; Hashmi, Imran; Jamal Khan, Sher; Qazi, Ishtiaq A; Nasir, Habib

    2016-10-01

    Application of chlorpyrifos (CP) has increased its environmental concentration. Increasing CP concentration has increased chances of adverse health effects. Its removal from environment has attained researcher's attention. CP degrading bacterial strains were isolated from wastewater and agricultural soil. Finally, selected five bacterial strains were identified using 16S rRNA nucleotide sequence analysis as Pseudomonas kilonensis SRK1, Serratia marcescens SRK2, Bacillus pumilus SRK4, Achromobacter xylosoxidans SRK5, and Klebsiella sp. T13. Interaction studies among bacterial strains demonstrated possibility for development of five membered bacterial consortium. Biodegradation potential of bacterial consortium was investigated in the presence of petrochemicals and trace metals. About 98 % CP removal was observed in sequencing batch reactors at inoculum level, 10 %; pH, 7; CP concentration, 400 mgL(-1), and HRT, 48 h. Experimental data has shown an excellent fit to first order growth model. Among all petrochemicals only toluene (in low concentration) has stimulatory effect on biodegradation of CP. Addition of petrochemicals (benzene, toluene, and xylene) in high concentration (100 mg L(-1)) inhibited bacterial activity and decreased CP removal. At low concentration i.e., 1 mg L(-1) of inorganic contaminants (Cu, Hg, and Zn) >96 % degradation was observed. Addition of Cu(II) in low concentration has stimulated CP removal efficiency. Hg(II) in all concentrations has strongly inhibited biodegradation rate except at 1 mgL(-1). In simulated pesticide, wastewater CP removal efficiency decreased to 77.5 %. Outcomes of study showed that both type and concentration of petrochemicals and trace metals influenced biodegradation of CP.

  4. Bioremediation of Pharmaceuticals, Pesticides, and Petrochemicals with Gomeya/Cow Dung

    OpenAIRE

    Gurpreet Kaur Randhawa; Jagdev Singh Kullar

    2011-01-01

    Use and misuse of pharmaceuticals, pesticides, and petrochemicals by man is causing havoc with nature, as they persist as such or as their toxic metabolites. These pollutants bioaccumulate in environment, and they ultimately reach man through various means. They are hazardous because of potential toxicity, mutagenicity, carcinogenicity, and genotoxicity. To rejuvenate nature, remediation methods currently available are usually expensive and might convert one toxic pollutant to another. Biorem...

  5. Process intensification in the petrochemicals industry: Drivers and hurdles for commercial implementation

    OpenAIRE

    Harmsen, Jan

    2010-01-01

    The process intensification technologies, reactive distillation, dividing wall column distillation (DWC) and reverse flow reactors (RFR) have been implemented at commercial scale in the petrochemical industry each more than 100 times. These technologies have been analysed with four drivers for innovation in the chemical process industry: feedstock cost reduction, capital expenditure reduction, energy reduction and safety risk reduction and with four hurdles for innovation: risk of failure by ...

  6. Commercial Application of UFR to VRDS Unit Expansion at Qilu Petrochemical Company

    Institute of Scientific and Technical Information of China (English)

    Sun Lili

    2007-01-01

    Technology and commercial application of UFR to VRDS unit expansion at Qilu Petrochemical Comply,for which engineering work was done by SINOPEC Engineering Incorporation(the former Beijing Design Institute),were introduced.Successful experience for the first commercial application of up-flow reactor technology and debottlenecking of the unit were summarized.The findings revealed a new route for inferior residue hydrotreating and revamping the existing units of the like.

  7. FBG Temperature and Pressure Sensing System for Hot Water Pipeline of Petrochemical Factory

    Institute of Scientific and Technical Information of China (English)

    Guo-Hui Lü; Shao-Hua Shang; Xu Jiang; Jin-Ping Ou; Chao Yang; Chuan-Di Li; Wei Xu

    2008-01-01

    A spatial and wavelength division multi-plexing fiber Bragg grating (FBG) sensing system is reported for monitoring the temperature and the pressure (T-P) of hot water pipeline in petrochemical factory. The FBG sensing system has 72 channels independently, and it provides the capability to monitor large number sensors at same time. A resolution of 0.1 ℃ and 0.01 MPa with a measurement bandwidth of 150 Hz has been achieved.

  8. Assessing the sustainability of wastewater treatment technologies in the petrochemical industry

    OpenAIRE

    Meerholz, A.; A C Brent, A. C.

    2013-01-01

    Selecting the most suitable industrial wastewater treatment technology is not only about providing the best technical solution at the lowest cost: it is also about sustainability (including social and environmental acceptance) and institutional feasibility. This paper demonstrates and evaluates a method that may be used for wastewater treatment technology assessment and selection in an industrial context, with a specific focus on biological wastewater treatment in a petrochemical company. The...

  9. JINAN: the City of Springs

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ Attractions Jinan is not a hot tourist destination in China, but it has Something special to offer, such as the 72 springs scattered throughout the city. Jinan has an alias of the Spring City (Quan Cheng)because of ouver 700 natural springs run through the city. Among them,the Baotu Spring is the most famous.

  10. Bioprospection and selection of bacteria isolated from environments contaminated with petrochemical residues for application in bioremediation.

    Science.gov (United States)

    Cerqueira, Vanessa S; Hollenbach, Emanuel B; Maboni, Franciele; Camargo, Flávio A O; Peralba, Maria do Carmo R; Bento, Fátima M

    2012-03-01

    The use of microorganisms with hydrocarbon degrading capability and biosurfactant producers have emerged as an alternative for sustainable treatment of environmental passives. In this study 45 bacteria were isolated from samples contaminated with petrochemical residues, from which 21 were obtained from Landfarming soil contaminated with oily sludge, 11 were obtained from petrochemical industry effluents and 13 were originated directly from oily sludge. The metabolization capability of different carbon sources, growth capacity and tolerance, biosurfactant production and enzymes detection were determined. A preliminary selection carried out through the analysis of capability for degrading hydrocarbons showed that 22% of the isolates were able to degrade all carbon sources employed. On the other hand, in 36% of the isolates, the degradation of the oily sludge started within 18-48 h. Those isolates were considered as the most efficient ones. Twenty isolates, identified based on partial sequencing of the 16S rRNA gene, were pre-selected. These isolates showed ability for growing in a medium containing 1% of oily sludge as the sole carbon source, tolerance in a medium containing up to 30% of oily sludge, ability for biosurfactant production, and expression of enzymes involved in degradation of aliphatic and aromatic compounds. Five bacteria, identified as Stenotrophomonas acidaminiphila BB5, Bacillus megaterium BB6, Bacillus cibi, Pseudomonas aeruginosa, and Bacillus cereus BS20 were shown to be promising for use as inoculum in bioremediation processes (bioaugmentation) of areas contaminated with petrochemical residues since they can use oily sludge as the sole carbon source and produce biosurfactants.

  11. Impact on surface ozone by fugitive emissons of ethylene and propylene from a petrochemical plant cluster

    Science.gov (United States)

    Hsieh, H.; Chang, J.; Chen, S.; Wang, J.

    2010-12-01

    Ethylene and propylene are two most produced organic compounds in the world which are mainly produced from the cracking process in the oil refinery industry. In a large petrochemical plant cluster a large variety of petrochemical products are derived from these two compounds used as starting reagents. Fugitive emissions of these two compounds from storage tanks and pipelines are often inevitable, which could pose a great burden on the formation of surface ozone and thus deteriorate air quality if leakage is significant. In this study, a photochemical assessment monitoring station (PAMS) was deployed 7 kilometers south of a large petrochemical plant cluster. Concentration spikes of ethylene and propylene were frequently observed by the on-line gas chromatographic system whenever northerly prevailed. The impact of ethylene and propylene’s leakage on ozone formation was simulated by an air quality model (i.e., PAMS-AQM), of which emission inventory of non-methane hydrocarbons (NMHCs) were speciated and calibrated by the PAMS measurements. Contribution to ozone formation by these two compounds in the downwind areas was able to be assessed by turning off the emissions of ethylene and propylene from this plant cluster while maintaining those of other precursors in the model. Scenarios of precursor (NMHC and NOx) reduction or increase were also simulated from the perspectives of ozone control strategies.

  12. Cleaner production and methodological proposal of eco-efficiency measurement in a Mexican petrochemical complex.

    Science.gov (United States)

    Morales, M A; Herrero, V M; Martínez, S A; Rodríguez, M G; Valdivieso, E; Garcia, G; de los Angeles Elías, Maria

    2006-01-01

    Abstract In the frame of the Petróleos Mexicanos Institutional Program for Sustainable Development, processes were evaluated in the manufacture operation of the petrochemical industry, with the purpose of reducing their ecological fingerprint. Thirteen cleaner production opportunities were registered in six process plants: ethylene oxide and glycols, acetaldehyde, ethylene, high density polyethylene, polypropylene switch and acrylonitrile, and 45 recommendations in the waste water treatment plant. Morelos is the second most important petrochemical complex in the Mexican and Latin American petrochemical industry. A tool was developed to obtain eco-efficiency indicators in operation processes, and as a result, potential savings were obtained based on best performance, as well as the integrated distribution of Sankey diagrams. Likewise, a mechanism of calculation to obtain economic savings based on the reduction of residues during the whole productive process is proposed. These improvement opportunities and recommendations will result in economic and environmental benefits minimising the use of water, efficient use of energy, raw materials and reducing residues from source, generating less environmental impacts during the process.

  13. Walking with springs

    Science.gov (United States)

    Sugar, Thomas G.; Hollander, Kevin W.; Hitt, Joseph K.

    2011-04-01

    Developing bionic ankles poses great challenges due to the large moment, power, and energy that are required at the ankle. Researchers have added springs in series with a motor to reduce the peak power and energy requirements of a robotic ankle. We developed a "robotic tendon" that reduces the peak power by altering the required motor speed. By changing the required speed, the spring acts as a "load variable transmission." If a simple motor/gearbox solution is used, one walking step would require 38.8J and a peak motor power of 257 W. Using an optimized robotic tendon, the energy required is 21.2 J and the peak motor power is reduced to 96.6 W. We show that adding a passive spring in parallel with the robotic tendon reduces peak loads but the power and energy increase. Adding a passive spring in series with the robotic tendon reduces the energy requirements. We have built a prosthetic ankle SPARKy, Spring Ankle with Regenerative Kinetics, that allows a user to walk forwards, backwards, ascend and descend stairs, walk up and down slopes as well as jog.

  14. Contribution of sand-associated enterococci to dry weather water quality.

    Science.gov (United States)

    Halliday, Elizabeth; Ralston, David K; Gast, Rebecca J

    2015-01-06

    Culturable enterococci and a suite of environmental variables were collected during a predominantly dry summer at a beach impacted by nonpoint source pollution. These data were used to evaluate sands as a source of enterococci to nearshore waters, and to assess the relationship between environmental factors and dry-weather enterococci abundance. Best-fit multiple linear regressions used environmental variables to explain more than half of the observed variation in enterococci in water and dry sands. Notably, during dry weather the abundance of enterococci in dry sands at the mean high-tide line was significantly positively related to sand moisture content (ranging from mean ENT in water could be predicted by a linear regression with turbidity alone. Temperature was also positively correlated with ENT abundance in this study, which may indicate an important role of seasonal warming in temperate regions. Inundation by spring tides was the primary rewetting mechanism that sustained culturable enterococci populations in high-tide sands. Tidal forcing modulated the abundance of enterococci in the water, as both turbidity and enterococci were elevated during ebb and flood tides. The probability of samples violating the single-sample maximum was significantly greater when collected during periods with increased tidal range: spring ebb and flood tides. Tidal forcing also affected groundwater mixing zones, mobilizing enterococci from sand to water. These data show that routine monitoring programs using discrete enterococci measurements may be biased by tides and other environmental factors, providing a flawed basis for beach closure decisions.

  15. Sand engine quells the coast's hunger for sand

    NARCIS (Netherlands)

    Van Dijk, T.

    2012-01-01

    An artificial peninsula at Ter Heijde is designed to feed the coast with sediment. Scientists are investigating whether this kind of sand engine could be the Netherlands’ answer to rising sea levels.

  16. Sand engine quells the coast's hunger for sand

    NARCIS (Netherlands)

    Van Dijk, T.

    2012-01-01

    An artificial peninsula at Ter Heijde is designed to feed the coast with sediment. Scientists are investigating whether this kind of sand engine could be the Netherlands’ answer to rising sea levels.

  17. Spectroscopic characterization of a Nigerian standard sand: Igbokoda sand

    CSIR Research Space (South Africa)

    Ojuri, OO

    2017-01-01

    Full Text Available the Middle Ordovician St. Peter Sandstone near Ottawa, Illinois, had been picked by the American Society for Testing and Materials (ASTM) as the reference sand to employ in testing cement and strength of concrete [9]. To the best of our knowledge... and magnetic resonance spectroscopic techniques due to its importance in cement, geotechnical/geo-environmental research in Nigeria. This should halt importation of standard silica sand for mortar and concrete testing...

  18. Saltation of Non-Spherical Sand Particles

    Science.gov (United States)

    Wang, Zhengshi; Ren, Shan; Huang, Ning

    2014-01-01

    Saltation is an important geological process and the primary source of atmospheric mineral dust aerosols. Unfortunately, no studies to date have been able to precisely reproduce the saltation process because of the simplified theoretical models used. For example, sand particles in most of the existing wind sand movement models are considered to be spherical, the effects of the sand shape on the structure of the wind sand flow are rarely studied, and the effect of mid-air collision is usually neglected. In fact, sand grains are rarely round in natural environments. In this paper, we first analyzed the drag coefficients, drag forces, and starting friction wind speeds of sand grains with different shapes in the saltation process, then established a sand saltation model that considers the coupling effect between wind and the sand grains, the effect of the mid-air collision of sand grains, and the effect of the sand grain shape. Based on this model, the saltation process and sand transport rate of non-spherical sand particles were simulated. The results show that the sand shape has a significant impact on the saltation process; for the same wind speed, the sand transport rates varied for different shapes of sand grains by as much as several-fold. Therefore, sand shape is one of the important factors affecting wind-sand movement. PMID:25170614

  19. Spring of women?

    Directory of Open Access Journals (Sweden)

    Mónica Castillo

    2012-12-01

    Full Text Available Terms such as “Islamic feminism” and “women’s movement” refer to those social movements of women that seek to assert their rights in Islamic societies. This brief study focuses on theses social movements of women and will presentan overview of the role and participation of women in the Arab Spring by examining news, events, press articles and opinions in order to contextualize the participation of women and feminists in the Arab Spring from a perspective of the social networking phenomenon as apparent drivers of the revolution.

  20. Instant Spring security starter

    CERN Document Server

    Jagielski, Piotr

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. A concise guide written in an easy-to-follow format following the Starter guide approach.This book is for people who have not used Spring Security before and want to learn how to use it effectively in a short amount of time. It is assumed that readers know both Java and HTTP protocol at the level of basic web programming. The reader should also be familiar with Inversion-of-Control/Dependency Injection, preferably with the Spring framework itsel

  1. Pro Spring security

    CERN Document Server

    Scarioni, Carlo

    2013-01-01

    Security is a key element in the development of any non-trivial application. The Spring Security Framework provides a comprehensive set of functionalities to implement industry-standard authentication and authorization mechanisms for Java applications. Pro Spring Security will be a reference and advanced tutorial that will do the following: Guides you through the implementation of the security features for a Java web application by presenting consistent examples built from the ground-up. Demonstrates the different authentication and authorization methods to secure enterprise-level applications

  2. What's Behind Spring Festival?

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ Similar to what the Christmas Day means for the westerners,the Spring Festival is the most important celebration for Chinese people.This big event according to Chinese traditional lunar calendar relaxes and pleases the whole country as the happiest gathering time of the year.National-wide crusade for going back home,too-difficult-to-get train tickets,generous family-going-out shopping,Miaohui laundering,New Year Eve reunion dinner,visiting friends and relatives,watching annual TV gala……each piece of clue reminds us of the smell of Chinese Spring Festival.

  3. Reclaimability of the spent sand mixture – sand with bentonite – sand with furfuryl resin

    Directory of Open Access Journals (Sweden)

    J. Dańko

    2011-04-01

    Full Text Available Introduction of new binding materials and new technologies of their hardening in casting moulds and cores production requires theapplication of reclamation methods adequate to their properties as well as special devices realizing tasks. The spent sands circulationsystem containing the same kind of moulding and core sands is optimal from the point of view of the expected reclamation results.However, in the face of a significant variability of applied technologies and related to them various reclamation methods, the need - of theobtained reclamation products assessment on the grounds of systematic criteria and uniform bases – arises, with a tendency of indicatingwhich criteria are the most important for the given sand system. The reclaimability results of the mixture of the spent moulding sand withGeko S bentonite and the spent core sand with the Kaltharz 404U resin hardened by acidic hardener 100 T3, are presented in the paper.Investigations were performed with regard to the estimation of an influence of core sands additions (10 –25% on the reclaimed materialquality. Dusts and clay content in the reclaim, its chemical reaction (pH and ignition loss were estimated. The verification of the reclaiminstrumental assessment was performed on the basis of the technological properties estimation of moulding sand with bentonite, where the reclaimed material was used as a matrix.

  4. Management recommendations: Sand Lake Complex

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a review of land management practices at the Sand Lake National Wildlife Refuge, by a land use specialist. Recommendations, time frame and...

  5. Spring batch essentials

    CERN Document Server

    Rao, P Raja Malleswara

    2015-01-01

    If you are a Java developer with basic knowledge of Spring and some experience in the development of enterprise applications, and want to learn about batch application development in detail, then this book is ideal for you. This book will be perfect as your next step towards building simple yet powerful batch applications on a Java-based platform.

  6. Energy Matters - Spring 2002

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-03-01

    Quarterly newsletter from DOE's Industrial Technologies Program to promote the use of energy-efficient industrial systems. The focus of the Spring 2002 Issue of Energy Matters focuses on premium energy efficiency systems, with articles on new gas technologies, steam efficiency, the Augusta Newsprint Showcase, and more.

  7. Renaissance Administrator, Spring 1998.

    Science.gov (United States)

    Dowdy, June P., Ed.

    1998-01-01

    This spring 1998 issue of Renaissance Administrator features the following articles: (1) "Servant Leadership and Higher Education--What is Leadership?" (Richard E. Hasselbach); (2) "Teaching Writing in the 90's--Carnivorous Printers and Dying Grandmothers" (Helen Ruggieri); (3) Assignment--Journal Writing" (Lynn Muscato); and (4) "A Business…

  8. Editors' Spring Picks

    Science.gov (United States)

    Library Journal, 2011

    2011-01-01

    While they do not represent the rainbow of reading tastes American public libraries accommodate, Book Review editors are a wildly eclectic bunch. One look at their bedside tables and ereaders would reveal very little crossover. This article highlights an eclectic array of spring offerings ranging from print books to an audiobook to ebook apps. It…

  9. Fish Springs molluscan studies: House and Percy Springs

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes the findings of a limited survey of House and Percy Springs molluscan fauna within Fish Springs National Wildlife Refuge. Various...

  10. 2008 Weather and Aeolian Sand-Transport Data from the Colorado River Corridor, Grand Canyon, Arizona

    Science.gov (United States)

    Draut, Amy E.; Sondossi, Hoda A.; Hazel, Joseph E.; Andrews, Timothy; Fairley, Helen C.; Brown, Christopher R.; Vanaman, Karen M.

    2009-01-01

    This report presents measurements of weather parameters and aeolian (windblown) sand transport made in 2008 near selected archaeological sites in the Colorado River corridor through Grand Canyon, Ariz. The quantitative methods and data discussed here form a basis for monitoring ecosystem processes that affect archeological-site stability. Combined with forthcoming work to evaluate landscape evolution at nearby archaeological sites, these data can be used to document the relationship between physical processes, including weather and aeolian sand transport, and their effects on the physical integrity of archaeological sites. Data collected in 2008 reveal event- and seasonal-scale variations in rainfall, wind, temperature, humidity, and barometric pressure. Broad seasonal changes in aeolian sediment flux are also apparent at most study sites. The continuation of monitoring that began in 2007, and installation of equipment at several new sites in early 2008, allowed evaluation of the effects of the March 2008 high-flow experiment (HFE) on aeolian sand transport. At two of the nine sites studied, spring and summer winds reworked 2008 HFE sandbars to form new aeolian dunes, at which sand moved inland toward larger, well-established dune fields. At the other seven study sites, neither dune formation nor enhanced sand transport after the HFE were observed. At several of those sites, dominant wind directions in spring 2008 were not oriented such that much HFE sand would have moved inland; at other sites, lack of increased inland sand flux is attributable to lack of sandbar enlargement near the study sites or to inhibition of sand movement by vegetation or local topography.

  11. EFFECTIVENESS OF THE SANDPITS SECURITY SYSTEM AGAINST MICROORGANISMS AND INTESTINAL PARASITES SAND CONTAMINATION

    Directory of Open Access Journals (Sweden)

    Magdalena Błaszak

    2015-09-01

    Full Text Available Playgrounds and sandpits (small architecture objects according to the Construction Law are subject to meticulous supervision, both at the design stage and subsequent status checks of the objects. One of the requirements arising from the need to protect playgrounds from animals is the necessity for fencing the object (Regulation of 31 December 2002 On Safety and Hygiene in Public and Private Schools and Institutions; Polish Standard PN-EN 1176 Playground equipment and surfacing. Does fencing playgrounds really reduce contamination of sand? To verify this hypothesis, the studies have been conducted on the residential areas’ sandpits, both fence secured and unsecured, located in close proximity to one another. The aim of the study was to evaluate the effectiveness of fences and nets as protection from microbial and parasite contamination of sandpits, mainly due to the access of animals to them. For several seasons of spring and summer the sand was examined in terms of the total number of heterotrophic bacteria and fungi (organic matter contamination of sand indicators and for the presence of coliform bacteria (including Escherichia coli, bacteria of the Salmonella genus and the eggs of intestinal parasites. It can be concluded that fencing playgrounds affects sand pollution less with waste and plant material (as a consequence, it has been reported statistically significantly less heterotrophic bacteria and fungi in the fenced sandpits’ sand. Unfortunately, the fence does not eliminate the risks associated with sand pollution of coliform bacteria. Cats and birds, but also dogs, still have a continuous access to sand. Due to the repeatedly stated carelessness of children and their caregivers, gates left open to the playground do not constitute an obstacle for domestic and stray animals. Another source of sand pollution with intestinal pathogens can be a manner of carriage of new sand, as there is no legislation governing the issue of transport

  12. Sand-dust storms in China: temporal-spatial distribution and tracks of source lands

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Sand-dust storm is a special natural disaster that frequentlyoccurs in deserts and their surrounding areas. With the data published on Surface Meteorological Monthly Bulletin and Surface Chart during 1971-1996, the temporal-spatial distribution and annual variation of sand-dust storms are analyzed on the basis of the case study of atmospheric processes. Furthermore, the tracks and source areas of sand-dust storms are determined with the aid of GIS. The results show that except some parts of Qinghai Province and Inner Mongolia as well as Beijing, sand-dust storms decrease apparently in time and space in recent decades in China. Sand-dust storms occur most frequently in spring, especially in April. According to their source areas, sand-dust storms are classified into two types, i.e., the inner-source and outer-source sand-dust storms. Most of the outer-source sand-dust storms move along the north and west tracks. The north-track outer-source sand-dust storms always intrude into China across the Sino-Mongolian border from Hami, a city in the eastern part of Xinjiang, to Xilin Gol, a league in Inner Mongolia, while the west-track ones intrude into China from both southern and northern Xinjiang. The source lands of inner-source sand-dust storms concentrate in the Taklimakan Desert and its surrounding areas in southern Xinjiang, southern part of the Junggar Basin in north of Xinjiang, the Hexi Corridor in western Gansu Province, the dry deserts of Inner Mongolia and the Qaidam Basin in Qinghai.

  13. Studying Springs in Series Using a Single Spring

    Science.gov (United States)

    Serna, Juan D.; Joshi, Amitabh

    2011-01-01

    Springs are used for a wide range of applications in physics and engineering. Possibly, one of their most common uses is to study the nature of restoring forces in oscillatory systems. While experiments that verify Hooke's law using springs are abundant in the physics literature, those that explore the combination of several springs together are…

  14. An application of failure mode and effect analysis (FMEA to assess risks in petrochemical industry in Iran

    Directory of Open Access Journals (Sweden)

    Mehdi Kangavari

    2015-06-01

    Full Text Available Petrochemical industries have a high rate of accidents. Failure mode and effect analysis (FMEA is a systematic method and thus is capable of analyzing the risks of systems from concept phase to system disposal, detecting the failures in design stage, and determining the control measures and corrective actions for failures to reduce their impacts. The objectives of this research were to perform FMEA to identify risks in an Iranian petrochemical industry and determine the decrease of the risk priority number (RPN after implementation of intervention programs. This interventional study was performed at one petrochemical plant in Tehran, Iran in 2014. Relevant information about job categories and plant process was gathered using brainstorming techniques, fishbone diagram, and group decision making. The data were collected through interviews, observation, and documents investigations and was recorded in FMEA worksheets. The necessary corrective measures were performed on the basis of the results of initial FMEA. Forty eight failures were identified in welding unit by application of FMEA to assess risks. Welding processes especially working at height got the highest RPN. Obtained RPN for working at height before performing the corrective actions was 120 and the score was reduced to 96 after performing corrective measures. Calculated RPN for all processes was significantly reduced (p≤0.001 by implementing the corrective actions. Scores of RPN in all studied processes effectively decreased after performing corrective actions in a petrochemical industry. FMEA method is a useful tool for identifying risk intervention priorities and effectiveness in a studied petrochemical industry.

  15. Warm Springs pupfish recovery plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document gives a history of pupfish and focuses on the warm springs pupfish. The warm springs pupfish is endangered, and this is a plan to help recover the...

  16. Disturbance of the inclined inserting-type sand fence to wind-sand flow fields and its sand control characteristics

    Science.gov (United States)

    Cheng, Jian-jun; Lei, Jia-qiang; Li, Sheng-yu; Wang, Hai-feng

    2016-06-01

    The inclined inserting-type sand fence is a novel sand retaining wall adopted along the Lanxin High-Speed Railway II in Xinjiang for controlling and blocking sand movement. To verify the effectiveness of the new fence structure for sand prevention, a wind tunnel test was used for flow field test simulation of the sand fence. The results indicate that the inclined inserting-type sand fence was able to deflect the flow of the sand and was able to easily form an upward slant acceleration zone on the leeward side of the sand fence. As shown by the percentage change in sand collection rates on the windward side and the leeward side of the sand fence, the sand flux per unit area at 4 m height in the slant upward direction increased on the leeward side of the inclined inserting-type sand fence. By comparing the flow fields, this site is an acceleration zone, which also reaffirms the correspondence of wind-sand flow fields with the spatial distribution characteristic of the wind-carried sand motion. The field sand collection data indicates that under the effects of the inclined inserting-type sand fence, the sandy air currents passing in front and behind the sand fence not only changed in quality, but the grain composition and particle size also significantly changed, suggesting that the inclined inserting-type sand fence has a sorting and filtering effect on the sandy air currents that passed through. The fence retained coarse particulates on the windward side and fine particulates within the shade of the wind on the leeward side.

  17. Metabolic profiling of residents in the vicinity of a petrochemical complex

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Tzu-Hsuen; Chung, Ming-Kei [Institute of Occupational Medicine and Industrial Hygiene, College of Public Health, National Taiwan University, Taipei, Taiwan (China); Lin, Ching-Yu [Institute of Environmental Health, College of Public Health, National Taiwan University, Taipei, Taiwan (China); Chen, Shu-Ting; Wu, Kuen-Yuh [Institute of Occupational Medicine and Industrial Hygiene, College of Public Health, National Taiwan University, Taipei, Taiwan (China); Chan, Chang-Chuan, E-mail: ccchan@ntu.edu.tw [Institute of Occupational Medicine and Industrial Hygiene, College of Public Health, National Taiwan University, Taipei, Taiwan (China)

    2016-04-01

    No previous studies have simultaneously measured the biomarkers of environmental exposure and metabolome perturbation in residents affected by industrial pollutants. This study aimed to investigate the metabolic effects of environmental pollutants such as vanadium and polycyclic aromatic hydrocarbons (PAHs) on residents in the vicinity of a petrochemical complex. The study subjects were 160 residents, including 80 high-exposure subjects exposed to high levels of vanadium and PAHs and 80 age- and gender-matched low-exposure subjects living within a 40-km radius of a petrochemical complex. The exposure biomarkers vanadium and 1-hydroxypyrene and four oxidative/nitrosative stress biomarkers were measured in these subjects. Plasma samples from the study subjects were also analyzed using {sup 1}H NMR spectroscopy for metabolic profiling. The results showed that the urinary levels of vanadium and 1-hydroxypyrene in the high-exposure subjects were 40- and 20-fold higher, respectively, than those in the low-exposure subjects. Higher urinary levels of stress biomarkers, including 8-OHdG, HNE-MA, 8-isoPF2α, and 8-NO{sub 2}Gua, were also observed among the high-exposure subjects compared with the low-exposure subjects. Partial least squares discriminant analysis of the plasma metabolome demonstrated a clear separation between the high- and low-exposure subjects; the intensities of amino acids and carbohydrate metabolites were lower in the high-exposure subjects compared with the low-exposure subjects. The exposure to vanadium and PAHs may cause a reduction in the levels of amino acids and carbohydrates by elevating PPAR and insulin signaling, as well as oxidative/nitrosative stress. - Highlights: • Metabolic effects when exposure to pollutants near a petrochemical complex • V and PAHs exposure associated with elevated oxidative/nitrosative stress responses • V and PAHs exposure related to reduced amino acid and carbohydrate levels • V and PAHs affect metabolic

  18. Hot Spring Metagenomics

    Directory of Open Access Journals (Sweden)

    Olalla López-López

    2013-04-01

    Full Text Available Hot springs have been investigated since the XIX century, but isolation and examination of their thermophilic microbial inhabitants did not start until the 1950s. Many thermophilic microorganisms and their viruses have since been discovered, although the real complexity of thermal communities was envisaged when research based on PCR amplification of the 16S rRNA genes arose. Thereafter, the possibility of cloning and sequencing the total environmental DNA, defined as metagenome, and the study of the genes rescued in the metagenomic libraries and assemblies made it possible to gain a more comprehensive understanding of microbial communities—their diversity, structure, the interactions existing between their components, and the factors shaping the nature of these communities. In the last decade, hot springs have been a source of thermophilic enzymes of industrial interest, encouraging further study of the poorly understood diversity of microbial life in these habitats.

  19. Magnetic Spring Device

    OpenAIRE

    Hassam, A. B.; Rodgers, J. C.

    2009-01-01

    A cylindrical system is proposed that will store magnetic energy in a localized azimuthal field that can then be quickly released on Alfvenic timescales, accompanied by the formation of a flowing Z-pinch plasma. The magnetized plasma is MHD in character and will have unilateral axial momentum with Alfvenic speeds. Conventional plasma gun injectors (Marshall type) have a limited parameter space of operation. The "magnetic spring" momentum injector differs from Marshall guns in that it has an a...

  20. Optimal array of sand fences.

    Science.gov (United States)

    Lima, Izael A; Araújo, Ascânio D; Parteli, Eric J R; Andrade, José S; Herrmann, Hans J

    2017-03-24

    Sand fences are widely applied to prevent soil erosion by wind in areas affected by desertification. Sand fences also provide a way to reduce the emission rate of dust particles, which is triggered mainly by the impacts of wind-blown sand grains onto the soil and affects the Earth's climate. Many different types of fence have been designed and their effects on the sediment transport dynamics studied since many years. However, the search for the optimal array of fences has remained largely an empirical task. In order to achieve maximal soil protection using the minimal amount of fence material, a quantitative understanding of the flow profile over the relief encompassing the area to be protected including all employed fences is required. Here we use Computational Fluid Dynamics to calculate the average turbulent airflow through an array of fences as a function of the porosity, spacing and height of the fences. Specifically, we investigate the factors controlling the fraction of soil area over which the basal average wind shear velocity drops below the threshold for sand transport when the fences are applied. We introduce a cost function, given by the amount of material necessary to construct the fences. We find that, for typical sand-moving wind velocities, the optimal fence height (which minimizes this cost function) is around 50 cm, while using fences of height around 1.25 m leads to maximal cost.

  1. Syntheses of 5-Thio-D-Mannose from Petrochemicals and a Disaccharide Analog Containing It

    Directory of Open Access Journals (Sweden)

    Hideya Yuasa

    2008-01-01

    Full Text Available Per-O-acetyl-5-thio-DL-mannose was synthesized from petrochemicals in six steps and 9% overall yield. It was then derivatized into glycosyl trichloroacetimidate and subjected to glycosidation reaction with a mannosyl acceptor to give a separatable mixture of disaccharides with 5-thio-D- and L-mannosides. This is the first synthesis of an enantiomerically pure 5-thiosugar derivative from racemic chemicals. The D-glycoside was derivatized into methyl (5-thio-α-D-mannopyranosyl-2-O-α-D-mannopyranoside 6-phosphate as a potential inhibitor of a golgi α-1,2-mannosidase.

  2. U. S. Price Controls on Energy and the International Petrochemical Market

    Science.gov (United States)

    1983-05-01

    wume at reports friom yea, ho~vV.C we have inreberd our databse and find that we do not have thea in theA Coll#CtJmD an f@.l that they wouild be of bumf...subsidized U.S. petro- chemical exports, and if so, what were the effects on world petrochemical prices and U.S. and foreign production levels? We found...measure these effects, we construct an integrated model of the world petro- chemical and energy input markets. The model includes equations repre

  3. Process improvement technology for petrochemical plant; Sekiyu kagaku puranto ni okesu purosesu kaizen gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, Shin

    1999-05-05

    Before, GTC technology Co. was a manufacturer of the tray as a Greenwich technology. It is the subsidiary, which undertakes technology and licence of the engineering firm in U.S.A. at present. It carries out besides the technology licence support in the startup for the prolonged driving of technical service, operating condition of the plant of improvement and optimization and, etc. Has made separation and purification technology, which made extractive distillation to be a beginning good and has the process improvement technology to the PTA (high-pure terephthalic acid) from BTX (benzene toluene xylene) of petrochemical plant. (NEDO)

  4. Air pollution by 3,4-benzpyrene in the vicinity of petrochemical plants

    Energy Technology Data Exchange (ETDEWEB)

    Samoilovich, L.N.

    1968-01-01

    Air samples were collected on filters and the filters were extracted with benzene; after evaporation of the benzene, the dry extract was dissolved in n-octane. The 3,4-benzpyrene (BP) concentration was determined by fluorescent spectroscopy at -196/sup 0/C; preliminary chromatographic fractionation of the extract could be omitted by quantitative analysis of BP according to the intensity of its fluorescence at 4030 Angstroms. The BP concentration in air samples collected in various areas around the Grozny petrochemical plant was 0.1 to 400 microg/100 m3 air; the highest levels were seen in samples collected near the areas where petroleum products were processed at high temperatures.

  5. Case studies illustrating in-situ remediation methods for soil and groundwater contaminated with petrochemicals

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, Robert A.; Lance, P.E.; Downs, A.; Kier, Brian P. [EMCON Northwest Inc., Portland, OR (United States)

    1993-12-31

    Four case studies of successful in-situ remediation are summarized illustrating cost-effective methods to remediate soil and groundwater contaminated with volatile and non-volatile petrochemicals. Each site is in a different geologic environment with varying soil types and with and without groundwater impact. The methods described include vadose zone vapor extraction, high-vacuum vapor extraction combined with groundwater tab.le depression, air sparging with groundwater recovery and vapor extraction, and bio remediation of saturated zone soils using inorganic nutrient and oxygen addition

  6. Ignition of the Soaring Droplet Sets of Waste-Derived Coal-Water Slurry With Petrochemicals

    Directory of Open Access Journals (Sweden)

    Valiullin Timur R.

    2016-01-01

    Full Text Available We have analyzed the ignition of droplet sets of waste-derived coal-water slurry with petrochemicals for the case of their soaring inside special combustion chamber. The fuel composition consists of filter cake of bituminous coal type G, waste turbine oil, water and plasticizer. Features of the ignition process were emphasized for groups of three soaring droplets in comparison with single droplet ignition. The ignition delay times were registered for particles that were deformed or segregated due to the interaction of initial fuel droplets with walls of the combustion chamber.

  7. Making highly flammable liquid wastes of petrochemical works safe by combustion without burners

    Energy Technology Data Exchange (ETDEWEB)

    Shelygin, B.L.; Bakhirev, V.I.; Gudzyuk, V.L.

    1983-11-01

    At the V.I. Lenin Energy Institute in Ivanov a technological program was implementd for combustion of highly flammable bulk wastes (for example, piperylene fractions) of petrochemical enterprises, with a moisture content of under 10% and mechanical admixtures (particles of catalyst dust) of up to 5%, without the use of burners. In devising the program, the results of mathematical theoretical analysis of pre-igniting preparation of substances to make them safe were utilized as well as the experience acquired in burning petroleum sludge in furnaces with bubbling equipment.

  8. Effects of petrochemical contamination on caged marine mussels using a multi-biomarker approach: Histological changes, neurotoxicity and hypoxic stress.

    Science.gov (United States)

    Maisano, Maria; Cappello, Tiziana; Natalotto, Antonino; Vitale, Valeria; Parrino, Vincenzo; Giannetto, Alessia; Oliva, Sabrina; Mancini, Giuseppe; Cappello, Simone; Mauceri, Angela; Fasulo, Salvatore

    2016-03-31

    This work was designed to evaluate the biological effects of petrochemical contamination on marine mussels. Mytilus galloprovincialis, widely used as sentinel organisms in biomonitoring studies, were caged at the "Augusta-Melilli-Priolo" industrial site (eastern Sicily, Italy), chosen as one of the largest petrochemical areas in Europe, and Brucoli, chosen as reference site. Chemical analyses of sediments at the polluted site revealed high levels of PAHs and mercury, exceeding the national and international guideline limits. In mussels from the polluted site, severe morphological alterations were observed in gills, mainly involved in nutrient uptake and gas exchange. Changes in serotonergic and cholinergic systems, investigated through immunohistochemical, metabolomics and enzymatic approaches, were highlighted in gills, as well as onset of hypoxic adaptive responses with up-regulation of hypoxia-inducible factor transcript. Overall, the application of a multi-biomarker panel results effective in assessing the biological effects of petrochemical contamination on the health of aquatic organisms.

  9. Sands at Gusev Crater, Mars

    Science.gov (United States)

    Cabrol, Nathalie A.; Herkenhoff, Kenneth E.; Knoll, Andrew H.; Farmer, Jack D.; Arvidson, Raymond E.; Grin, E.A.; Li, Ron; Fenton, Lori; Cohen, B.; Bell, J.F.; Yingst, R. Aileen

    2014-01-01

    Processes, environments, and the energy associated with the transport and deposition of sand at Gusev Crater are characterized at the microscopic scale through the comparison of statistical moments for particle size and shape distributions. Bivariate and factor analyses define distinct textural groups at 51 sites along the traverse completed by the Spirit rover as it crossed the plains and went into the Columbia Hills. Fine-to-medium sand is ubiquitous in ripples and wind drifts. Most distributions show excess fine material, consistent with a predominance of wind erosion over the last 3.8 billion years. Negative skewness at West Valley is explained by the removal of fine sand during active erosion, or alternatively, by excess accumulation of coarse sand from a local source. The coarse to very coarse sand particles of ripple armors in the basaltic plains have a unique combination of size and shape. Their distribution display significant changes in their statistical moments within the ~400 m that separate the Columbia Memorial Station from Bonneville Crater. Results are consistent with aeolian and/or impact deposition, while the elongated and rounded shape of the grains forming the ripples, as well as their direction of origin, could point to Ma'adim Vallis as a possible source. For smaller particles on the traverse, our findings confirm that aeolian processes have dominated over impact and other processes to produce sands with the observed size and shape patterns across a spectrum of geologic (e.g., ripples and plains soils) and aerographic settings (e.g., wind shadows).

  10. The fire warning system of identical fiber Bragg grating and its application in petrochemical tank and tower

    Science.gov (United States)

    Zhou, Ciming; Jiang, Desheng; Liao, Shenghui; Cheng, Hongbo

    2006-01-01

    A new fire warning system based on the technique of multiplexing of Identical Fiber Bragg Grating (IFBG) and its application in petrochemical tank and tower are presented in this paper. Sensors of IFBG can largely increase the multiplexing number of sensors and can reduce the cost of demodulation. The number of multiplexed FBG in the IFBG array has come to 100. The new fire warning system has been applied in some petrochemical tank and tower, such as Sinopec Zhenhai Refining and Chemical Company Limited, and has obtained a very good effect.

  11. Emission of polycyclic aromatic hydrocarbons (PAHs) from the liquid injection incineration of petrochemical industrial wastewater.

    Science.gov (United States)

    Wang, Lin-Chi; Wang, I-Ching; Chang, Juu-En; Lai, Soon-Onn; Chang-Chien, Guo-Ping

    2007-09-05

    This study investigated the emission of polycyclic aromatic hydrocarbons (PAHs) from stack flue gas and air pollution control device (APCD) effluent of the liquid injection incinerator (LII) disposing the petrochemical industrial wastewater, and PAH removal efficiencies of wet electrostatic precipitator (WESP) and wet scrubber (WSB). The PAH carcinogenic potency were investigated with the benzo(a)pyrene equivalent concentration (BaP(eq)). The remarkably high total-BaP(eq) concentration (220 microgNm(-3)) in the stack flue gas was much higher than those of several published emission sources, and indicated the possible influence on its surrounding environment. The total-PAH emission factors of the WESP, WSB and stack flue gas were 78.9, 95.7 and 30,900 microgL(-1) wastewater, respectively. The removal efficiencies of total-PAHs were 0.254, 0.309 and 0.563% for WESP, WSB and overall, respectively, suggesting that the use of both WESP and WSB shows insignificant PAH removal efficiencies, and 99.4% of total-PAHs was directly emitted to the ambient air through the stack flue gas. This finding suggested that the better incineration efficiencies, and APCD removal efficiencies for disposing the petrochemical industrial wastewater are necessary in future.

  12. Job insecurity, leadership empowerment behaviour, employee engagement and intention to leave in a petrochemical laboratory

    Directory of Open Access Journals (Sweden)

    Sonet van Schalkwyk

    2010-03-01

    Full Text Available Orientation: Engaging individuals at work plays an important role in retaining them. Job security and leadership empowerment behaviour are antecedents of employee engagement.Research purpose: The objective of this study was to investigate the relationship between job insecurity, leadership empowerment behaviour (as perceived by the employees who report to leaders, employee engagement and intention to leave their jobs in a petrochemical laboratory.Motivation for the study: Knowledge of the effects of job insecurity and leadership on employee engagement and turnover intention will contribute to improved talent management.Research design, approach and method: A correlational design was used. A total of 169 employees in a petrochemical laboratory were studied. The measuring instruments included the Job Insecurity Index, the Leadership Empowerment Behaviour Questionnaire, and the Utrecht Work Engagement Scale. Two questions were used to measure intention to leave.Main findings: The results showed that job insecurity was not statistically significantly related to employee engagement and turnover intention. Leadership empowerment behaviour contributed statistically significantly to employee engagement and low turnover intention. Employee engagement partially mediated the relationship between leadership empowerment behaviour and turnover intention.Practical implications: Leaders should be developed to show empowerment behaviour, because it affects employee engagement, which in turn affects their turnover intentionContribution: This was the first study that demonstrated the effect of empowerment behaviour of leaders on the engagement and turnover intention of employees.

  13. The sequencing batch reactor as an excellent configuration to treat wastewater from the petrochemical industry.

    Science.gov (United States)

    Caluwé, Michel; Daens, Dominique; Blust, Ronny; Geuens, Luc; Dries, Jan

    2017-02-01

    In the present study, the influence of a changing feeding pattern from continuous to pulse feeding on the characteristics of activated sludge was investigated with a wastewater from the petrochemical industry from the harbour of Antwerp. Continuous seed sludge, adapted to the industrial wastewater, was used to start up three laboratory-scale sequencing batch reactors. After an adaptation period from the shift to pulse feeding, the effect of an increasing organic loading rate (OLR) and volume exchange ratio (VER) were investigated one after another. Remarkable changes of the specific oxygen uptake rate (sOUR), microscopic structure, sludge volume index (SVI), SVI30/SVI5 ratio, and settling rate were observed during adaptation. sOUR increased two to five times and treatment time decreased 43.9% in 15 days. Stabilization of the SVI occurred after a period of 20 days and improved significantly from 300 mL·g(-1) to 80 mL·g(-1). Triplication of the OLR and VER had no negative influence on sludge settling and effluent quality. Adaptation time of the microorganisms to a new feeding pattern, OLR and VER was relatively short and sludge characteristics related to aerobic granular sludge were obtained. This study indicates significant potential of the batch activated sludge system for the treatment of this industrial petrochemical wastewater.

  14. A novel salt-tolerant bacterial consortium for biodegradation of saline and recalcitrant petrochemical wastewater.

    Science.gov (United States)

    Ahmadi, Mehdi; Jorfi, Sahand; Kujlu, Raheleh; Ghafari, Shokouh; Darvishi Cheshmeh Soltani, Reza; Jaafarzadeh Haghighifard, Nematollah

    2017-04-15

    Treatment of a saline petrochemical wastewater with BOD5/COD ratio of less than 0.1 was investigated using a consortium consisted of three isolated salt-tolerant bacteria namely, Kocuria turfanesis, Halomonas alkaliphila and Pseudomonas balearica. Selected bacteria were isolated from petrochemical wastewater containing mineral salt mediums of 3% salinity. A lab-scale activated sludge bioreactor was used for startup in batch mode operation and after obtaining the MLSS concentration of about 3000 mg/L, the operation was changed to continuous flow mode to determine the biokinetic coefficients under different organic loading rates of 0.33-1.21 kg CODm(-3) d(-1). The COD removal efficiency of 78.7%-61.5% was observed for treatment of real saline wastewater with a decreasing trend along with increasing the organic loading rate. In addition, results of kinetic investigation demonstrated that the yield(Y), endogenous decay coefficient (kd), maximum reaction rate (Kmax), maximum specific growth rate (μmax) and saturation constant (Ks) were 0.54 mg VSS mg COD(-1), 0.014 day(-1), 1.23 day(-1), 0.66 day(-1), and 1315 mg L(-1), respectively.

  15. Impact of Spiritual Intelligence on the Staff Happiness (Case Study: Golpayegan Petrochemical Company

    Directory of Open Access Journals (Sweden)

    Ali Nasr Isfahani

    2013-07-01

    Full Text Available Spiritual intelligence as a infrastructure of individuals beliefs, have a basic role in the various fields particularly in the promotion and provision of mental health and the other hand, importance of happiness in the mental health, physical health, efficiency and social participation are the most important priorities in the psychology. The aim of this study is investigation of relationship between spiritual intelligence and staff happiness of Golpayegan Petrochemical Company. This study is descriptive survey and of correlation branch with the functional nature. The statistical population includes employees of Golpayegan Petrochemical Company and questionnaire was used for data collection. Formal justifiability was used to determine questionnaire justifiability. Cronbach's alpha reliability amount of 94% was confirmed. In this study, software SPSS and AMOS was used for data analysis. Component of spiritual intelligence: transcendental consciousness, spiritual experience, patience and forgiveness were tested with the staff happiness and it is determined that there is a significant relationship between spiritual intelligence variable with the staff happiness variable.

  16. Effect of Exposure to a Mixture of Organic Solvents on Hearing Thresholds in Petrochemical Industry Workers

    Directory of Open Access Journals (Sweden)

    Ziba Loukzadeh

    2014-10-01

    Full Text Available Introduction: Hearing loss is one of the most common occupational diseases. In most workplaces, workers are exposed to noise and solvents simultaneously, so the potential risk of hearing loss due to solvents may be attributed to noise.  In this study we aimed to assess the effect of exposure to mixed aromatic solvents on hearing in the absence of exposure to hazardous noise.   Materials and Methods: In a cross-sectional study, 99 workers from the petrochemical industry with exposure to a mixture of organic solvents whose noise exposure was lower than 85 dBA were compared with 100 un-exposed controls. After measuring sound pressure level and mean concentration of each solvent in the workplace, pure-tone-audiometry was performed and the two groups were compared in terms of high-frequency and low-frequency hearing loss. T-tests and Chi-square tests were used to compare the two groups.   Results: The mean hearing threshold at all frequencies among petrochemical workers was normal (below 25 dB. We did not observe any significant association between solvent exposure and high-frequency or low-frequency hearing loss.   Conclusion:  This study showed that temporary exposure (less than 4 years to a mixture of organic solvents, without exposure to noise, does not affect workers’ hearing threshold in audiometry tests.

  17. Statistical analysis of incidents reported in the Greek Petrochemical Industry for the period 1997-2003.

    Science.gov (United States)

    Konstandinidou, Myrto; Nivolianitou, Zoe; Markatos, Nikolaos; Kiranoudis, Chris

    2006-07-31

    This paper makes an analysis of all reported accidents and incidents in the Greek Petrochemical Industry for the period spanning from 1997 to 2003. The work performed is related to the analysis of important parameters of the incidents, their inclusion in a database adequately designed for the purposes of this analysis and an importance assessment of this reporting scheme. Indeed, various stakeholders have highlighted the importance of a reporting system for industrial accidents and incidents. The European Union has established for this purpose the Major Accident Reporting System (MARS) for the reporting of major accidents in the Member States. However, major accidents are not the only measure that can characterize the safety status of an establishment; neither are the former the only events from which important lessons can be learned. Near misses, industrial incidents without major consequences, as well as occupational accidents could equally supply with important findings the interested analyst, while statistical analysis of these incidents could give significant insight in the understanding and the prevention of similar incidents or major accidents in the future. This analysis could be more significant, if each industrial sector was separately analyzed, as the authors do for the petrochemical sector in the present article.

  18. The Impact of Job Stress and Job Satisfaction on Workforce Productivity in an Iranian Petrochemical Industry.

    Science.gov (United States)

    Hoboubi, Naser; Choobineh, Alireza; Kamari Ghanavati, Fatemeh; Keshavarzi, Sareh; Akbar Hosseini, Ali

    2017-03-01

    Job stress and job satisfaction are important factors affecting workforce productivity. This study was carried out to investigate the job stress, job satisfaction, and workforce productivity levels, to examine the effects of job stress and job satisfaction on workforce productivity, and to identify factors associated with productivity decrement among employees of an Iranian petrochemical industry. In this study, 125 randomly selected employees of an Iranian petrochemical company participated. The data were collected using the demographic questionnaire, Osipow occupational stress questionnaire to investigate the level of job stress, Job Descriptive Index to examine job satisfaction, and Hersey and Goldsmith questionnaire to investigate productivity in the study population. The levels of employees' perceived job stress and job satisfaction were moderate-high and moderate, respectively. Also, their productivity was evaluated as moderate. Although the relationship between job stress and productivity indices was not statistically significant, the positive correlation between job satisfaction and productivity indices was statistically significant. The regression modeling demonstrated that productivity was significantly associated with shift schedule, the second and the third dimensions of job stress (role insufficiency and role ambiguity), and the second dimension of job satisfaction (supervision). Corrective measures are necessary to improve the shift work system. "Role insufficiency" and "role ambiguity" should be improved and supervisor support must be increased to reduce job stress and increase job satisfaction and productivity.

  19. In-depth analysis of the causal factors of incidents reported in the Greek petrochemical industry

    Energy Technology Data Exchange (ETDEWEB)

    Konstandinidou, Myrto [Institute of Nuclear Technology-Radiation Protection, National Center for Scientific Research ' Demokritos' , Aghia Paraskevi 15310 (Greece); Nivolianitou, Zoe, E-mail: zoe@ipta.demokritos.gr [Institute of Nuclear Technology-Radiation Protection, National Center for Scientific Research ' Demokritos' , Aghia Paraskevi 15310 (Greece); Kefalogianni, Eirini; Caroni, Chrys [School of Applied Mathematical and Physical Sciences, National Technical University of Athens, 9 Iroon Polytexneiou Str., Zografou Campus, 157 80 Athens (Greece)

    2011-11-15

    This paper presents a statistical analysis of all reported incidents in the Greek petrochemical industry from 1997 to 2003. A comprehensive database has been developed to include industrial accidents (fires, explosions and substance releases), occupational accidents, incidents without significant consequences and near misses. The study concentrates on identifying and analyzing the causal factors related to different consequences of incidents, in particular, injury, absence from work and material damage. Methods of analysis include logistic regression with one of these consequences as dependent variable. The causal factors that are considered cover four major categories related to organizational issues, equipment malfunctions, human errors (of commission or omission) and external causes. Further analyses aim to confirm the value of recording near misses by comparing their causal factors with those of more serious incidents. The statistical analysis highlights the connection between the human factor and the underlying causes of accidents or incidents. - Highlights: > The research work is original, based on field data collected directly from the petrochemical industry. > It deals with the in-depth statistical analysis of accident data on human-organizational causes. > It researches underlying causes of accidents and the parameters affecting them. > The causal factors that are considered cover four big taxonomies. > Near misses are worth recording for comparing their causal factors with more serious incidents.

  20. Environmental values in the petrochemical industry: A Q-method study in South West Iran

    Directory of Open Access Journals (Sweden)

    Ghoochani Omid M.

    2015-12-01

    Full Text Available Achieving sustainable development in different regional and cultural contexts is dependent, in part, upon an understanding of key actors’ underlying environmental, social and economic values. The social research technique called Q-methodology presents an effective means to explore such values as a matter of discourse: revealing the typologies of stakeholder perspectives within a given debate. Q-method involves factor analysis of participant rank-ordered preselected statements on a topic. The resultant factors are then reinterpreted as social discourses. In this study we use Q-methodology to explore the environmental values of Health Safety and Environmental (HSE managers in petrochemical companies in Khuzestan province in southwest Iran. Khuzestan is a key region of petrochemical product development, with significant associated environmental pollution effects. Understanding HSE managers’ attitudes to environmental protection is of value in predicting broader environmental impacts to the region, given the relative importance of their role in regulating the environmental performance of this industry. Our results reveal four distinct and varied perspectives on environmental protection labelled: ‘Environmental stewardship’, ‘Environmental presentism’, ‘Technological optimism’ and ‘Enlightened anthropocentrism’. We then discuss how these four emergent perspectives correspond to broader environmental discourses as categorized by John Dryzek: i.e. green rationalism, economic rationalism, prometheanism and ecological modernization respectively.

  1. Biodegradation of phenanthrene using adapted microbial consortium isolated from petrochemical contaminated environment.

    Science.gov (United States)

    Janbandhu, Anjali; Fulekar, M H

    2011-03-15

    In developing countries like India, there are many industrial areas discharging effluent containing large amount of polyaromatic hydrocarbon (PAH) which causes hazardous effect on the soil-water environment. The objective of this study was to isolate and characterize high-efficiency PAH-degrading microbial consortium from 3 decade old petrochemical refinery field located in Nagpur, Maharashtra with history of PAH disposal. Based on biochemical tests and 16S rDNA gene sequence analysis the consortium was identified as Sphingobacterium sp., Bacillus cereus and a novel bacterium Achromobacter insolitus MHF ENV IV with effective phenanthrene-degrading ability. The biodegradation data of phenanthrene indicates about 100%, 56.9% and 25.8% degradation at the concentration of 100mg/l, 250 mg/l and 500 mg/l respectively within 14 days. The consortium and its monoculture isolates also utilized variety of other hydrocarbons for growth. To best of our knowledge this is the first time that Achromobacter insolitus has been reported to mineralize phenanthrene effectively. GC-MS analysis of phenanthrene degradation confirmed biodegradation by detection of intermediates like salicylaldehyde, salicylic acid and catechol. All the results indicated that the microbial consortium have a promising application in bioremediation of petrochemical contaminated environments and could be potentially useful for the study of PAH degradation and for bioremediation purposes.

  2. Making and Doing Politics Through Grassroots Scientific Research on the Energy and Petrochemical Industries

    Directory of Open Access Journals (Sweden)

    Sara Wylie

    2017-09-01

    Full Text Available The high stakes of emergent environmental crises, from climate change to widespread toxic exposures, have motivated STS practitioners to innovate methodologically, including leveraging STS scholarship to actively remake environmental scientific practice and technologies. This thematic collection brings together current research that transforms how communities and academics identify, study, and collectively respond to contaminants engendered by the fossil fuel and petrochemical industries, including air contamination from hydraulic fracking, marine pollution from petroleum-derived plastics, and hydrocarbon derivatives such as formaldehyde that intoxicate our homes. These interventions make inroads into the “undone science” and “regimes of imperceptibility” of environmental health crises. Authors, most of whom are practitioners, investigate grassroots methods for collaboratively designing and developing low-cost monitoring tools, crowdsourcing data analysis, and imagining ways of redressing toxicity outside of the idioms of science. Collectively, these articles work towards remaking how knowledge is made about and across industrial systems by networking community grounded approaches for accounting for environmental health issues created by the fossil fuels and allied petrochemical industries.

  3. Testing ecological tradeoffs of a new tool for removing fine sediment in a spring-fed stream

    Science.gov (United States)

    Sepulveda, Adam; Sechrist, Juddson D.; Marczak, Laurie B

    2014-01-01

    Excessive fine sediment is a focus of stream restoration work because it can impair the structure and function of streams, but few methods exist for removing sediment in spring-fed streams. We tested a novel method of sediment removal with the potential to have minimal adverse effects on the biological community during the restoration process. The Sand Wand system, a dredgeless vacuum developed by Streamside Technologies, was used to experimentally remove fine sediment from Kackley Springs, a spring creek in southeastern Idaho. We assessed the effects of the Sand Wand on stream physical habitat and macroinvertebrate composition for up to 60 days after the treatment. We documented changes in multiple habitat variables, including stream depth, median particle size, and the frequency of embedded substrate in stream reaches that were treated with the Sand Wand. We also found that macroinvertebrate composition was altered even though common macroinvertebrate metrics changed little after the treatment. Our results suggest that the Sand Wand was effective at removing fine sediments in Kackley Springs and did minimal harm to macroinvertebrate function, but the Sand Wand was not ultimately effective in improving substrate composition to desired conditions. Additional restoration techniques are still needed to decrease the amount of fine sediment.

  4. DPTM simulation of aeolian sand ripple

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Aeolian sand ripple and its time evolution are simulated by the discrete particle tracing method (DPTM) presented in this paper. The difference between this method and the current methods is that the former can consider the three main factors relevant to the formation of natural aeolian sand ripples,which are the wind-blown sand flux above the sand bed formed by lots of sand particles with different di-ameters,the particle-bed collision and after it the rebound and ejection of sand particles in the sand bed,the saltation of high-speed sand particles and the creep of low-speed sand particles,respectively. The simulated aeolian sand ripple is close to the natural sand ripple not only in basic shape and characteristic,particle size segregation and stratigraphy,but also in formation stages. In addition,three important speeds can be obtained by this method,which are the propagation speed of the saturated aeolian sand ripple and the critical frictional wind speeds of emergence and disappearance of sand ripple.

  5. DPTM simulation of aeolian sand ripple

    Institute of Scientific and Technical Information of China (English)

    ZHENG XiaoJing; BO TianLi; XIE Li

    2008-01-01

    Aeolian sand ripple and its time evolution are simulated by the discrete particle tracing method (DPTM) presented in this paper.The difference between this method and the current methods is that the former can consider the three main factors relevant to the formation of natural aeolian sand ripples, which are the wind-blown sand flux above the sand bed formed by lots of sand particles with different di-ameters, the particle-bed collision and after it the rebound and ejection of sand particles in the sand bed, the saltation of high-speed sand particles and the creep of low-speed sand particles, respectively.The simulated aeolian sand ripple is close to the natural sand ripple not only in basic shape and characteristic, particle size segregation and stratigraphy, but also in formation stages.In addition, three important speeds can be obtained by this method, which are the propagation speed of the saturated aeolian sand ripple and the critical frictional wind speeds of emergence and disappearance of sand ripple.

  6. Dry reusing and wet reclaiming of used sodium silicate sand

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Based on the characteristics of used sodium silicate sand and the different use requirements for recycled sand, "dry reusing and wet reclaiming of used sodium silicate sand" is considered as the most suitable technique for the used sand. When the recycled sand is used as support sand, the used sand is only reused by dry process including breaking, screening, dust-removal, etc., and it is not necessary that the used sand is reclaimed with strongly rubbing and scraping method, but when the recycled sand is used as facing sand (or single sand), the used sand must be reclaimed by wet method for higher removal rate of the residual binders. The characteristics and the properties of the dry reused sand are compared with the wet reclaimed sand after combining the different use requirements of support sand and facing sand (or single sand), and above the most adaptive scheme has also been validated.

  7. Sand and Water Table Play

    Science.gov (United States)

    Wallace, Ann H.; White, Mary J.; Stone, Ryan

    2010-01-01

    The authors observed preschoolers engaged at the sand and water table to determine if math could be found within their play. Wanting to understand how children interact with provided materials and what kinds of math ideas they explore during these interactions, the authors offer practical examples of how such play can promote mathematical…

  8. Sand and Water Table Play

    Science.gov (United States)

    Wallace, Ann H.; White, Mary J.; Stone, Ryan

    2010-01-01

    The authors observed preschoolers engaged at the sand and water table to determine if math could be found within their play. Wanting to understand how children interact with provided materials and what kinds of math ideas they explore during these interactions, the authors offer practical examples of how such play can promote mathematical…

  9. Impact on sand and water

    NARCIS (Netherlands)

    Bergmann, R.P.H.M.

    2007-01-01

    In this thesis we investigate the impact of a body on sand and water. When a body impacts a free surface in the inertial regime the series of events is the following: On impact material is blown away in all directions and an impact cavity forms. Due to the hydrostatic pressure from the sides the cav

  10. Silo model tests with sand

    DEFF Research Database (Denmark)

    Munch-Andersen, Jørgen

    Tests have been carried out in a large silo model with Leighton Buzzard Sand. Normal pressures and shear stresses have been measured during tests carried out with inlet and outlet geometry. The filling method is a very important parameter for the strength of the mass and thereby the pressures...

  11. experimental studies of sand production from unconsolidated ...

    African Journals Online (AJOL)

    ES Obe

    Production of sand during oil and gas exploration causes severe operational prob- ... duction such as risk of well failure, erosion of pipelines and surface facilities, sand separa- tion and disposal ... ment, theoretical and numerical analysis have.

  12. UK silica sand resources for fracking

    OpenAIRE

    Mitchell, Clive

    2013-01-01

    UK silica sand resources for fracking Clive Mitchell, Industrial Minerals Specialist, British Geological Survey, Keyworth, Nottingham, NG12 5GG Email: Silica sand is high purity quartz sand that is mainly used for glass production, as foundry sand, in horticulture, leisure and other industrial uses. One specialist use is as a ‘proppant’ to enhance oil and gas recovery. This presentation will focus on this application, particularly for shale gas recovery where it is mo...

  13. Size and composition of airborne particles from pavement wear, tires, and traction sanding.

    Science.gov (United States)

    Kupiainen, Kaarle J; Tervahattu, Heikki; Räisänen, Mika; Mäkelä, Timo; Aurela, Minna; Hillamo, Risto

    2005-02-01

    Mineral matter is an important component of airborne particles in urban areas. In northern cities of the world, mineral matter dominates PM10 during spring because of enhanced road abrasion caused by the use of antiskid methods, including studded tires and traction sanding. In this study, factors that affect formation of abrasion components of springtime road dust were assessed. Effects of traction sanding and tires on concentrations, mass size distribution, and composition of the particles were studied in a test facility. Lowest particle concentrations were observed in tests without traction sanding. The concentrations increased when traction sand was introduced and continued to increase as a function of the amount of aggregate dispersed. Emissions were additionally affected by type of tire, properties of traction sand aggregate, and driving speed. Aggregates with high fragmentation resistance and coarse grain size distribution had the lowest emissions. Over 90% of PM10 was mineral particles. Mineralogy of the dust and source apportionment showed that they originated from both traction sand and pavement aggregates. The remaining portion was mostly carbonaceous and originated from tires and road bitumen. Mass size distributions were dominated by coarse particles. Contribution of fine and submicron size ranges were approximately 15 and 10% in PM10, respectively.

  14. Treating tar sands formations with karsted zones

    Energy Technology Data Exchange (ETDEWEB)

    Vinegar, Harold J. (Bellaire, TX); Karanikas, John Michael (Houston, TX)

    2010-03-09

    Methods for treating a tar sands formation are described herein. The tar sands formation may have one or more karsted zones. Methods may include providing heat from one or more heaters to one or more karsted zones of the tar sands formation to mobilize fluids in the formation. At least some of the mobilized fluids may be produced from the formation.

  15. Unit for Production of MTBE and Butene-1 from Refinery C4 Successfully Put on Stream at Guangzhou Petrochemical Complex

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ The unit for manufacture of MTBE with co-production of butene-1 was successfully put on stream at Guangzhou Pet-rochemical Complex (GPC). It is told that this is the first domestic unit that utilizes the refinery C4 fraction to make MTBE and butene-1.

  16. The level of toxic and essential trace elements in hair of petrochemical workers involved in different technological processes.

    Science.gov (United States)

    Skalny, Anatoly V; Kaminskaya, Galina A; Krekesheva, Tatyana I; Abikenova, Sholpan K; Skalnaya, Margarita G; Berezkina, Elena S; Grabeklis, Andrei R; Tinkov, Alexey A

    2017-02-01

    The objective of the investigation is comparative analysis of hair trace element content in workers of different departments of petrochemical plant. A total of 75 men working in office (engineers), and departments 1 (D1), 3 (D3), and 4 (D4) of the petrochemical plant, as well as occupationally non-exposed persons, were examined. Hair trace element levels were analyzed using inductively coupled plasma mass spectrometry. The office workers were characterized by the highest hair As, Hg, Sn, I, and Si content as compared to the workers of other departments, whereas the level of those elements did not differ significantly from the control values. It is notable that hair Be levels in all employees of petrochemical plant were significantly lower, whereas Se content was significantly higher than that in unexposed controls. Hair toxic trace element content in workers directly involved in industrial processes did not differ significantly or was lower than that in the control group. At the same time, the highest levels of essential trace elements (Cr, Fe, and I) were observed in employees working in primary oil refining (D1). Hair levels of Co, I, and Li were maximal in persons of sulfur and bitumen-producing division (D4). The lowest levels of both essential and toxic trace elements in hair were detected in employees involved in production of liquefied gas, kerosene, and diesel fuel (D3). The obtained data demonstrate that involvement in different technological processes in petrochemical complex differentially affect hair trace element content in workers.

  17. [Physiological response of corn seedlings to changes of wind-sand flow strength].

    Science.gov (United States)

    Zhao, Ha-lin; Li, Jin; Zhou, Rui-lian; Qu, Hao; Yun, Jian-ying; Pan, Cheng-chen

    2015-01-01

    Corn seedlings are often harmed by strong wind-sand in the spring in semi-arid wind-sand area of west of Northeast China. In order to understand physiological response mechanisms of the corn seedlings to wind-sand damage, the changes in MDA content, membrane permeability, protective enzymes activities and osmotic regulation substances at 0 (CK) , 6, 9, 12, 15 and 18 m . s-1 wind speed (wind-sand flow strength: 0, 1.00, 28.30, 63.28, 111.82 and 172.93 g . cm-1 . min-1, respectively) for 10 min duration were studied during the spring, 2013 in the Horqin Sand Land of Inner Mongolia. The results showed that effects of wind-sand flow blowing on the RWC of the corn seedling were lighter in the 6-12 m . s-1 treatments, but the RWC decreased by 19.0% and 18.7% in the 15 m . s-1 and 18 m . s-1 treatments compared to the CK, respectively. The MDA content tended to decline with increasing the wind-sand flow strength, and decreased by 35.0% and 39.0% in the 15 m . s-1 and 18 m . s-1 treatments compared to the CK, respectively. The membrane permeability increased significantly with increasing the wind-sand flow strength, and increased by 191.3% and 187.8% in the 15 m . s-1 and 18 m . s-1 treatments compared to the CK, respectively. With the increase of wind-sand flow strength, SOD activities decreased and changes of CAT activities were not significant, only POD activities increased significantly, which played an important role in the process of scavenging reactive oxygen species and protecting cell membrane against damage. For lighter water stress caused, by wind-sand flow blowing, proline and soluble sugar did not play any role in osmotic adjustment, but the proline content increased by 11.4% and 24.5% in the 15 m . s-1 and 18 m . s-1 treatments compared to the CK, respectively, which played an important role in osmotic adjustment.

  18. Developing bulk exchange spring magnets

    Energy Technology Data Exchange (ETDEWEB)

    Mccall, Scott K.; Kuntz, Joshua D.

    2017-06-27

    A method of making a bulk exchange spring magnet by providing a magnetically soft material, providing a hard magnetic material, and producing a composite of said magnetically soft material and said hard magnetic material to make the bulk exchange spring magnet. The step of producing a composite of magnetically soft material and hard magnetic material is accomplished by electrophoretic deposition of the magnetically soft material and the hard magnetic material to make the bulk exchange spring magnet.

  19. Several Moments of the Spring

    Institute of Scientific and Technical Information of China (English)

    毛竹晨

    2003-01-01

    Spring has finally fallen on Cambridge. After a long, wet and dark winter, sky finally brightens up. The first messenger of spring is the daffodil (水仙花). English daffodils are slightly different from the Chinese ones that we are all familiar with. First of all, they bloom in spring, not in winter as the Chinese daffodils do. Second, they do not grow in water, but on the ground, though they

  20. Sand Waves. Report 1. Sand Wave Shoaling in Navigation Channels

    Science.gov (United States)

    1992-09-01

    heights range from 0.8 m in the Minas Basin, Bay of Fundy (Dalrymple 1984) to 6.0 m in the Bahia Blanca Estuary, Argentina (Aliotta and Perillo 1987...26 PART IV: SITE-SPECIFIC SAND WAVE SHOALING PROBLEMS .. ........ 30 Columbia River Navigation Channel ........ ............... .. 30 Panama ...problem location discussed in this report is at St. Andrew Bay near Panama City, Florida. A relatively short section of the jettied inlet channel requires

  1. Spring viremia of carp

    Science.gov (United States)

    Ahne, W.; Bjorklund, H.V.; Essbauer, S.; Fijan, N.; Kurath, G.; Winton, J.R.

    2002-01-01

    pring viremia of carp (SVC) is an important disease affecting cyprinids, mainly common carp Cyprinus carpio. The disease is widespread in European carp culture, where it causes significant morbidity and mortality. Designated a notifiable disease by the Office International des Epizooties, SVC is caused by a rhabdovirus, spring viremia of carp virus (SVCV). Affected fish show destruction of tissues in the kidney, spleen and liver, leading to hemorrhage, loss of water-salt balance and impairment of immune response. High mortality occurs at water temperatures of 10 to 17°C, typically in spring. At higher temperatures, infected carp develop humoral antibodies that can neutralize the spread of virus and such carp are protected against re-infection by solid immunity. The virus is shed mostly with the feces and urine of clinically infected fish and by carriers. Waterborne transmission is believed to be the primary route of infection, but bloodsucking parasites like leeches and the carp louse may serve as mechanical vectors of SVCV. The genome of SVCV is composed of a single molecule of linear, negative-sense, single-stranded RNA containing 5 genes in the order 3¹-NPMGL-5¹ coding for the viral nucleoprotein, phosphoprotein, matrix protein, glycoprotein, and polymerase, respectively. Polyacrylamide gel electrophoresis of the viral proteins, and sequence homologies between the genes and gene junctions of SVCV and vesicular stomatitis viruses, have led to the placement of the virus as a tentative member of the genus Vesiculovirus in the family Rhabdoviridae. These methods also revealed that SVCV is not related to fish rhabdoviruses of the genus Novirhabdovirus. In vitro replication of SVCV takes place in the cytoplasm of cultured cells of fish, bird and mammalian origin at temperatures of 4 to 31°C, with an optimum of about 20°C. Spring viremia of carp can be diagnosed by clinical signs, isolation of virus in cell culture and molecular methods. Antibodies directed

  2. Mortality and morbidity study of petrochemical employees in a polluted site

    Directory of Open Access Journals (Sweden)

    Pasetto Roberto

    2012-05-01

    Full Text Available Abstract Background The area of Gela was included among the 57 Italian polluted sites of national interest for environmental remediation because of its widespread contamination from a petrochemical complex. The present study investigates mortality and morbidity of the cohort of Gela petrochemical workers with the aim of disentangling occupational from residential risk. Methods Mortality was assessed for 5,627 men hired from 1960, year of the plant start-up, to 1993; it was followed up for vital status in the period 1960–2002. Morbidity was analysed for 5,431 workers neither dead nor lost to follow-up from 1960 to 2001 and was based on Hospital Discharge Records in the period 2001–2006. The work experience was classified in terms of job categories such as blue collars, white collars, and both – workers who shifted from blue to white collar (95% or vice versa. An ad hoc mobility model was applied to define qualitative categories of residence in Gela, as residents and commuters. Standardized Mortality Ratios (SMRs and Mortality Rate Ratios (MRRs were computed, the latter by using a Poisson regression model. Morbidity was analyzed in terms of Hospital Discharge Odds Ratios (HDORs through a logistic regression model. While performing the internal comparisons, white collars was the reference category for the job analysis, and commuters was the reference category for the residential analysis. Results In the light of epidemiological evidence about health risk from petrochemical industries in both occupational and environmental settings, and/or on the basis of information about occupational and residential contamination and health risk in the area of Gela, noteworthy results are shown for lung cancer [MRR: 2.11 (CI 90%; 0.96-4.63 in blue collars; 1.71 (1.09-2.69 in residents], respiratory diseases [HDOR: 2.0 (1.0-3.0 in blue collars; 1.4 (0.96-2.06 in residents] and genitourinary diseases [HDOR: 1.34 (1.06-1.68 in blue collars; 1.23 (1.04-1.45 in

  3. Spring security 3.x cookbook

    CERN Document Server

    Mankale, Anjana

    2013-01-01

    This book follows a cookbook style exploring various security solutions provided by Spring Security for various vulnerabilities and threat scenarios that web applications may be exposed to at the authentication and session level layers.This book is for all Spring-based application developers as well as Java web developers who wish to implement robust security mechanisms into web application development using Spring Security.Readers are assumed to have a working knowledge of Java web application development, a basic understanding of the Spring framework, and some knowledge of the fundamentals o

  4. Groundwater Discharges to Rivers in the Western Canadian Oil Sands Region

    Science.gov (United States)

    Ellis, J.; Jasechko, S.

    2016-12-01

    Groundwater discharges into rivers impacts the movement and fate of nutrients and contaminants in the environment. Understanding groundwater-surface water interactions is especially important in the western Canadian oil sands, where groundwater contamination risks are elevated and baseline water chemistry data is lacking, leading to substantial uncertainties about anthropogenic influences on local river quality. High salinity groundwater springs sourced from deep aquifers, comprised of Pleistocene-aged glacial meltwater, are known to discharge into many rivers in the oil sands. Understanding connections between deep aquifers and surficial waterways is important in order to determine natural inputs into these rivers and to assess the potential for injected wastewater or oil extraction fluids to enter surface waters. While these springs have been identified, their spatial distribution along rivers has not been fully characterized. Here we present river chemistry data collected along a number of major river corridors in the Canadian oil sands region. We show that saline groundwater springs vary spatially along the course of these rivers and tend to be concentrated where the rivers incise Devonian- or Cretaceous-aged aquifers along an evaporite dissolution front. Our results suggest that water sourced from Devonian aquifers may travel through bitumen-bearing Cretaceous units and discharge into local rivers, implying a strong groundwater-surface water connection in specialized locations. These findings indicate that oil sands process-affected waters that are injected at depth have the potential to move through these aquifers and reach the rivers at the surface at some time in the future. Groundwater-surface water interactions remain key to understanding the risks oil sands activities pose to aquatic ecosystems and downstream communities.

  5. Workers' exposures and potential health risks to air toxics in a petrochemical complex assessed by improved methodology.

    Science.gov (United States)

    Chan, Chang-Chuan; Shie, Ruei-Hao; Chang, Ta-Yuan; Tsai, Dai-Hua

    2006-02-01

    This study was designed to comprehensively evaluate workers' potential health risks of exposure to 39 air toxics in the Ta-sher Petrochemical Complex. Open-Path Fourier Transform Infrared Spectroscopy (OP-FTIR) was used to measure concentrations of air toxics. We used the measured worksite concentrations between 1997 and 1999 at 11 companies in the petrochemical complex, employing 3,100 on-site workers. The 39 measured air toxics included 10 chemicals with acute reference exposure levels (RELa), 19 chemicals with chronic reference exposure levels (RELc), and 3 chemicals classified as Class 1 or 2A human carcinogens by the International Agency for Research on Cancer (IARC). We then used RELa to calculate the hazard index of acute health effects (HI ( A )) for workers in individual plants. We also calculated the hazard index of chronic health effects (HIc) and cancer risks for all workers in the entire petrochemical complex. Workers in five companies had HI ( A ) greater than 1 because of toluene, benzene, methyl ethyl ketone, chloroform and isopropanol exposures. Workers in this petrochemical complex had HIc greater than 1 because of acrylonitrile, 1,3-butadiene, hydrogen cyanide, and n,n-dimethylformamide exposures. Risk of hematopoietic system cancer because of benzene and ethylene oxide exposure, and respiratory system cancer because of 1,3-butadiene exposure was estimated to be 3.1-6.1 x 10(-4) and 5.2-7.1 x 10(-4), respectively. Our findings indicated that workers in the petrochemical complex might have excess cancer and noncancer risks due to acute or chronic exposures to air toxics from multiple emission sources.

  6. Alternative refining configurations and petrochemical integration in Brazil; Configuracoes alternativas de refino e integracao com petroquimica no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Gomes, Gabriel Lourenco [Coordenacao dos Programas de Pos-graduacao em Engenharia (COPPE/UFRJ), RJ (Brazil). Programa de Planejamento Energetico

    2008-07-01

    This paper presents the results of alternative configurations for a new refinery in Brazil, with the objective of transforming national heavy oils into low sulfur derivatives and petrochemical products, until 2020. The hypothetical refinery proposed has a processing capacity of 10.000 t/year of Marlim heavy oil, through distillation and delayed coking units. Two base cases of conversion units were considered, one with a Fluid Catalytic Cracking - FCC, and another with a Hydro-cracking - HCC. Both cases also have several hydro-treating units to be able to achieve future fuel quality specifications in Brazil and for export. The refinery-petrochemical integration was considered through the use of a petrochemical FCC instead of a conventional FCC, and through the addition of a steam cracking and aromatics separation unit, included as an option to the 3 refinery cases: FCC, HCC, and Petro FCC. All the results were compared in terms of economic return. The best return on investment is obtained in the Petro FCC case. The FCC and HCC cases present lower and similar results for 2006 prices. However, the HCC has the advantage of producing a greater amount of middle distillates, with a higher expected demand growth in Brazil. Finally, the addition of a steam cracking unit reduces the return on investment of the hypothetical refinery for all cases using 2006 prices. However, the return of the petrochemical activity on the same period could still justify this investment, depending on the petrochemicals market evolution. With the steam cracking unit, the Petro FCC and HCC cases present similar returns using 2006 prices. (author)

  7. METHOD OF PROCESSING MONAZITE SAND

    Science.gov (United States)

    Welt, M.A.; Smutz, M.

    1958-08-26

    A process is described for recovering thorium, uranium, and rare earth values from monazite sand. The monazite sand is first digested with sulfuric acid and the resulting "monazite sulfate" solution is adjusted to a pH of between 0.4 and 3.0, and oxalate anions are added causing precipitation of the thorium and the rare earths as the oxalates. The oxalate precipitate is separated from the uranium containing supernatant solution, and is dried and calcined to the oxides. The thorium and rare earth oxides are then dissolved in nitric acid and the solution is contacted with tribntyl phosphate whereby an organic extract phase containing the cerium and thorium values is obtained, together with an aqueous raffinate containing the other rare earth values. The organic phase is then separated from the aqueous raffinate and the cerium and thorium are back extracted with an aqueous medium.

  8. Large springs of east Tennessee

    Science.gov (United States)

    Sun, Pao-chang P.; Criner, J.H.; Poole, J.L.

    1963-01-01

    Springs constitute an important source of water in east Tennessee, and many individual springs are capable of supplying the large quantities needed for municipal and industrial supplies. Most of the springs in east Tennessee issue from solution openings and fractured and faulted zones in limestone and dolomite of the Knox Group, Chickamauga Limestone, and Conasauga Group. The ability of these rocks to yield a sustained flow of water to springs is dependent on a system of interconnected openings through which water can infiltrate from the land surface and move to points of natural discharge. Ninety springs were selected for detailed study, and 84 of these are analyzed in terms of magnitude and variability of discharge. Of the 84 springs analyzed, 4 flow at an average rate of 10 to 100 cfs (cubic feet per second), 62 at an average rate of 1 to 10 cfs, and 18 at an average rate of 1 cfs or less. Of the 90 springs, 75 are variable in their discharge; that is, the ratio of their fluctuations to their average discharges exceeds 100 percent. Mathematical analysis of the flow recession curve of Mill Spring near Jefferson City shows that the hydrologic system contributing to the flow of the spring has an effective capacity of about 70 million cubic feet of water. The rate of depletion of this volume of water, in the absence of significant precipitation, averages 0.0056 cfs per day between the time when the hydrologic system is full and the time when the spring ceases to flow. From such a curve it is possible to determine at any time the residual volume of water remaining in the system and the expected rate of decrease in discharge from that time to cessation of flow. Correlation of discharge measurements of 22 springs with those of Mill Spring shows that rough approximations of discharge can be projected for springs for which few measurements are available. Seventeen of the springs analyzed in this manner show good correlation with Mill Spring: that is, their coefficients

  9. Characterization of sand lenses embedded in tills

    DEFF Research Database (Denmark)

    Kessler, Timo Christian; Klint, K.E.S.; Nilsson, B.

    2012-01-01

    of the various types of sand lenses is discussed, primarily in relation to the depositional and glaciotectonic processes they underwent. Detailed characterization of sand lenses facilitates such interpretations. Finally, the observations are linked to a more general overview of the distribution of sand lenses......Tills dominate large parts of the superficial sediments on the Northern hemisphere. These glacial diamictons are extremely heterogeneous and riddled with fractures and lenses of sand or gravel. The frequency and geometry of sand lenses within tills are strongly linked to glaciodynamic processes...... occurring in various glacial environments. This study specifically focuses on the appearance and spatial distribution of sand lenses in tills. It introduces a methodology on how to measure and characterize sand lenses in the field with regard to size, shape and degree of deformation. A set of geometric...

  10. A compact topology for sand automata

    CERN Document Server

    Dennunzio, Alberto; Masson, Benoît

    2008-01-01

    In this paper, we exhibit a strong relation between the sand automata configuration space and the cellular automata configuration space. This relation induces a compact topology for sand automata, and a new context in which sand automata are homeomorphic to cellular automata acting on a specific subshift. We show that the existing topological results for sand automata, including the Hedlund-like representation theorem, still hold. In this context, we give a characterization of the cellular automata which are sand automata, and study some dynamical behaviors such as equicontinuity. Furthermore, we deal with the nilpotency. We show that the classical definition is not meaningful for sand automata. Then, we introduce a suitable new notion of nilpotency for sand automata. Finally, we prove that this simple dynamical behavior is undecidable.

  11. Rheological Characterization of Green Sand Flow

    DEFF Research Database (Denmark)

    Jabbaribehnam, Mirmasoud; Spangenberg, Jon; Hovad, Emil

    2016-01-01

    The main aim of this paper is to characterize experimentally the flow behaviour of the green sand that is used for casting of sand moulds. After the sand casting process is performed, the sand moulds are used for metal castings. The rheological properties of the green sand is important to quantify...... module for characterizing granular materials. The new module enables viscosity measurements of the green sand as function of the shear rate at different flow rates, i.e. 0, 2, 4, 6, 8, 10, 12 and 15 L/min. The results show generally that the viscosity decreases with both the shear- and flow rate....... In addition, the measurements show that the green sand flow follows a shear-thinning behaviour even after the full fluidization point....

  12. Silo model tests with sand

    DEFF Research Database (Denmark)

    Munch-Andersen, Jørgen

    Tests have been carried out in a large silo model with Leighton Buzzard Sand. Normal pressures and shear stresses have been measured during tests carried out with inlet and outlet geometry. The filling method is a very important parameter for the strength of the mass and thereby the pressures...... as well as the flow pattern during discharge of the silo. During discharge a mixed flow pattern has been identified...

  13. Formation of Craters in Sand

    Directory of Open Access Journals (Sweden)

    Vanissra Boonyaleepun

    2007-06-01

    Full Text Available The diameter of craters formed by spheres of varying mass dropped into sand at low speed was studied. The relationship between the diameter of the crater formed and the kinetic energy of the projectile at impact was found to be of the same general form as that for planetary meteor craters. The relationship is shown to be a power law with exponent 0.17.

  14. Formation of Craters in Sand

    Directory of Open Access Journals (Sweden)

    Vanissra Boonyaleepun

    2007-06-01

    Full Text Available The diameter of craters formed by spheres of varying mass dropped into sand at low speed was studied. The relationship between the diameter of the crater formed and the kinetic energy of the projectile at impact was found to be of the same general form as that for planetary meteor craters. The relationship is shown to be a power law with exponent 0.17

  15. Thermal Properties of oil sand

    Science.gov (United States)

    LEE, Y.; Lee, H.; Kwon, Y.; Kim, J.

    2013-12-01

    Thermal recovery methods such as Cyclic Steam Injection or Steam Assisted Gravity Drainage (SAGD) are the effective methods for producing heavy oil or bitumen. In any thermal recovery methods, thermal properties (e.g., thermal conductivity, thermal diffusivity, and volumetric heat capacity) are closely related to the formation and expansion of steam chamber within a reservoir, which is key factors to control efficiency of thermal recovery. However, thermal properties of heavy oil or bitumen have not been well-studied despite their importance in thermal recovery methods. We measured thermal conductivity, thermal diffusivity, and volumetric heat capacity of 43 oil sand samples from Athabasca, Canada, using a transient thermal property measurement instrument. Thermal conductivity of 43 oil sand samples varies from 0.74 W/mK to 1.57 W/mK with the mean thermal conductivity of 1.09 W/mK. The mean thermal diffusivity is 5.7×10-7 m2/s with the minimum value of 4.2×10-7 m2/s and the maximum value of 8.0×10-7 m2/s. Volumetric heat capacity varies from 1.5×106 J/m3K to 2.11×106 J/m3K with the mean volumetric heat capacity of 1.91×106 J/m3K. In addition, physical and chemical properties (e.g., bitumen content, electric resistivity, porosity, gamma ray and so on) of oil sand samples have been measured by geophysical logging and in the laboratory. We are now proceeding to investigate the relationship between thermal properties and physical/chemical properties of oil sand.

  16. A new tool for risk analysis and assessment in petrochemical plants

    Directory of Open Access Journals (Sweden)

    El-Arkam Mechhoud

    2016-09-01

    Full Text Available The aim of our work was the implementation of a new automated tool dedicated to risk analysis and assessment in petrochemical plants, based on a combination of two analysis methods: HAZOP (HAZard and OPerability and FMEA (Failure Mode and Effect Analysis. Assessment of accident scenarios is also considered. The principal advantage of the two analysis methods is to speed-up hazard identification and risk assessment and forecast the nature and impact of such accidents. Plant parameters are analyzed under a graphical interface to facilitate the exploitation of our developed approach. This automated analysis brings out the different deviations of the operating parameters of any system in the plant. Possible causes of these deviations, their consequences and preventive actions are identified. The result is risk minimization and dependability enhancement of the considered system.

  17. An analysis of the inter-project knowledge transfer in the petrochemical industry

    Directory of Open Access Journals (Sweden)

    Marcelo Müller Beuren

    2015-02-01

    Full Text Available This paper presents a knowledge transfer (KT analysis in an operational project management environment of the petrochemical industry. The main objective of this paper is to identify the major barriers and to suggest improvements activities aiming to foster the KT process. To this end, interviews with members of the project department were conducted by means of a questionnaire. Results were analyzed to identify the most problematic barriers and to propose improvements. The study concluded that the greatest difficulties are related to the transfer of tacit knowledge between different teams. The main contribution of this paper is that it presents an analysis of an unexplored environment and it proposes an improvement of the adapted method for KT study, by using a relationship matrix between the questionnaire and the barriers, so that problems can be identified in an easier manner.

  18. Application of Olefin-Reducing Catalyst in FCC Unit at Daqing Petrochemical Company

    Institute of Scientific and Technical Information of China (English)

    Liu Xinfeng; Yang Daoxue; Zhang Guojing; Yao Hua

    2003-01-01

    This article refers to the application of DOCO olefin-reducing catalyst developed by RIPP and manufactured by the Catalyst Factory of Changling Refining and Chemical Company in the 1.4 Mt/a RFCCU at Daqing Petrochemical Company. Results of operation over two months had revealed that this catalyst had good olefin-reducing ability and heavy oil converting ability adapted to paraffinic feedstock. The gasoline olefin yield had been reduced to 36.1 v% from 54.2 v% with gasoline RON rating decreased by 1.4 units. The induction period of gasoline had significantly increased to 952 mm, while the coke yield was increased by 0.05 percentage point with light oil yield dropping by only 0.02 percentage point. The FCC product distribution is favorable.

  19. Analysis of Energy Consumption and Energy Conservation Measures for RFCCU at Shengli Petrochemical Company

    Institute of Scientific and Technical Information of China (English)

    Li Ning; Xu Zhenling

    2006-01-01

    This article introduces a string of energy conservation measures adopted over the past several years by the RFCC unit at Shengli Petrochemical Complex, including the optimization of feedstock properties, the adoption of high-efficiency atomizing nozzles, the revamp of CO boiler, the atomization by means of dry gas, the post-burning of flue gas as well as the application of frequency converting machines and pumps, resulting in ideal effects. The energy consumption of the RFCC unit was gradually decreased to 2984.25 MJ/t from the original level of 3716.99 MJ/t. After comparing basic energy consumption values with actual consumption values, the authors have set forward measures for further energy conservation, such as the recovery of low-temperature excess heat contained in oil/gas streams exiting from the fractionation tower top, addition of the fourth cyclone, delivery of hot oil slurry, and heat tracing with hot water.

  20. The effects of intellectual capital on financial performance: A case study of petrochemical and pharmaceutical firms

    Directory of Open Access Journals (Sweden)

    Naser Azad

    2012-04-01

    Full Text Available There is no doubt that traditional accounting does not provide actual value of assets since they only measure tangible assets. Intellectual capital provides a new concept for measuring actual value of the assets and we can calculate future values of the firm. In this paper, we first calculate intellectual capital based on the ratio of market value/book value for three years period. Then we investigate the relationship between intellectual capital and growth rate of intellectual capital as well as financial performance of some publicly traded petrochemical and pharmaceutical firms. The results of our survey indicate that there is a positive relationship between intellectual capital and equity growth with EVA and return of assets. However, there is no meaningful relationship between intellectual assets with net earnings.

  1. Petrochemical from oil, natural gas, coal and biomass. Energy use, economics and innovation

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Tao

    2009-03-04

    The petrochemical industry is faced with the dual challenges of climate change and the security of energy supply. To deal with these challenges, it is necessary to identify technologies for the production of basic petrochemicals that could potentially improve energy efficiency and/or utilizing alternative primary energy sources, e.g. coal and biomass. This thesis explores the potential of novel process technologies. In total, 24 technological routes were studied and three aspects are analyzed: environment, economics and innovation. Regarding the environmental aspects, three conventional routes (i.e. utilizing naphtha and heavy feedstocks derived from crude oil and ethane derived from natural gas) are the most energy-efficient routes among all 24 routes studied. The total energy use of methane-based routes is 30% higher and that of coal and biomass-based routes is about 60-150% higher than that of the conventional routes. The total CO2 emissions of conventional and methane-based routes are similar. The total CO2 emissions of coal-based routes are by far the highest, with an exception of a coal-based route with CO2 capture and sequestration whose CO2 emissions are similar to those of the conventional routes. Biomass-based routes can avoid CO2 emissions due to biomass-based electricity cogeneration and the use of biomass-derived energy. Regarding the economic aspects, we performed an economic analysis of 24 routes using expected energy prices for the period of 2030-2050 found in the public literature. The costs of crude oil and natural gas-based routes are clearly higher than those of coal and biomass-based routes by $100-500 per ton light olefin value equivalent products. Production costs of coal and biomass-based routes are rather similar to each other. The effect of CO2 emissions costs (in the range of $0-100 per ton CO2) was tested and was found to be strong on the coal-based routes and also quite significant on the biomass-based routes. The effect on other routes

  2. Developing Measures for Assessing the Causality of Safety Culture in a Petrochemical Industry

    Energy Technology Data Exchange (ETDEWEB)

    Wu, T.-C., E-mail: tcwu@sunrise.hk.edu.t [HungKuang University, Department of Safety, Health and Environmental Engineering (China); Lin, C.-H.; Shiau, S.-Y. [HungKuang University, Institute of Occupational Safety and Hazard Prevention (China)

    2009-12-15

    This paper discusses safety culture in the petrochemical sector and the causes and consequences of safety culture. A sample of 520 responses selected by simple random sampling completed questionnaires for this survey, the return rate was 86.75%. The research instrument comprises four sections: basic information, the safety leadership scale (SLS), the safety climate scale (SCS), and the safety performance scale (SPS). SPSS 12.0, a statistical software package, was used for item analysis, validity analysis, and reliability analysis. Exploratory factor analysis indicated that (1) SLS abstracted three factors such as safety caring, safety controlling, and safety coaching; (2) SCS comprised three factors such as emergency response, safety commitment, and risk perception; and (3) SPS was composed of accident investigation, safety training, safety inspections, and safety motivation. We conclude that the SLS, SCS, and SPS developed in this paper have good construct validity and internal consistency and can serve as the basis for future research.

  3. SINOPEC's Countermeasure to Withstand the Impact on Petrochemical Industry after China's Accession to WTO

    Institute of Scientific and Technical Information of China (English)

    Zhu Jianmin

    2004-01-01

    @@ 1 Profile of SINOPEC SINOPEC is the first Chinese company, which was listed in Hong Kong, New York, London and Shanghai. The business portfolio of SINOPEC covers oil exploration and development,petroleum refining, petrochemical and oil products marketing,with a total sales revenue of 324.2 billion RMB and a net profit of 22 billion RMB. SINOPEC is the second largest oil and gas producer in China and is also the biggest oil refiner of China with its crude processing capacity ranked number five in the world. With 24,000 wholly controlled gas stations and 4,127 authorized gas stations, SINOPEC owns an extensive oil products marketing network. It is the largest in China oil products distributor and sales company, and is ranked the sixth largest company in the world.

  4. Prevalence of Musculoskeletal Symptoms among Employees of Iranian Petrochemical Industries: October 2009 to December 2012

    Directory of Open Access Journals (Sweden)

    AR Choobineh

    2013-10-01

    Full Text Available Background: Work-related musculoskeletal disorders (WMSDs are a common health problem throughout the world and a major cause of disability in the workplace. Objective: To determine the prevalence rate of MSDs, assessment of ergonomics working conditions and identification of major risk factors associated with MSDs symptoms among employees of Iranian petrochemical industries between October 2009 and December 2012. Methods: In this study, we studied 1184 randomly selected employees of 4 Iranian petrochemical companies with at least one year of work experience in office or operational units. For those with office jobs, data were collected using Nordic Musculoskeletal disorders Questionnaire (NMQ and ergonomics checklist for the assessment of working conditions. For those with operational jobs, NMQ and Quick Exposure Check (QEC method were used for data collection. Results: The most prevalent MSD symptoms were reported in lower back (41.5% and neck (36.5%. The prevalence of MSDs in all body regions but elbows and thighs of the office staff was significantly higher than that of operational workers. Assessment of working conditions in office staff revealed that the lowest index was attributed to workstation. QEC technique among operational workers showed that in 73.8% of the workers studied, the level of exposure to musculoskeletal risks was “high” or “very high.” MSDs were associated with type of job, age, body mass index, work experience, gender, marital status, educational level and type of employment. Conclusion: The prevalence of MSDs in the office staff was higher than that of operational workers. Level of exposure to MSDs risk was high in operational workers. Corrective measures are thus necessary for improving working conditions for both office and operational units.

  5. Comparing the steam and electric heat tracing solutions for petrochemical or refining facilities

    Energy Technology Data Exchange (ETDEWEB)

    Young, Joseph G.; McQueen, Greg [Tyco Thermal Controls, Belgie (Belgium)

    2012-07-01

    In this era of energy conservation and cost reduction, the ability to effectively select the optimal solution to meet the heat management system needs of petrochemical or refining facilities is becoming increasingly important. Depending on the type and location of the plant, a heat management system (HMS) can comprise a significant portion of the overall capital expenditure, as well as the ongoing operating and maintenance costs. Several important heat management system design decisions affect the financial operations of a facility, including the selection of the heat tracing technology, the utility distribution scheme, and the insulation system criteria, among others. However, most of these decisions are made early in the project life-cycle without thorough analysis of the various options available. From a high level perspective, numerous heat trace media should be considered, including electric, steam, tempered water, and glycol. These systems also have different impacts on piping systems within the plant battery limits (ISBL) and transfer lines outside of the battery limits (OSBL). This paper takes a careful look at two of the predominant heat tracing technologies - electric heat tracing and steam tracing - and compares these within the larger framework of the heat management system, and relative to petrochemical or refining facilities within the general Brazil geography. In the broader context, a heat management system is defined as the heat tracing technology itself, the utility distribution associated with that technology, the control and monitoring scheme associated with that technology, and the insulation system. We will evaluate the capital expenditure cost, operating expenditure cost, and overall reliability of the electric and steam tracing mediums in both the ISBL and OSBL environments within this broader context. (author)

  6. On the Hydrogen Embrittlement of Commercially Pure Alpha Titanium: An Example from the Petrochemical Industry

    Science.gov (United States)

    Tawancy, H. M.

    2017-02-01

    Grade 2 of commercially pure Ti consisting of α-phase has many applications in the petrochemical industry such as floaters of gauges used to indicate liquid levels in tanks and reaction vessels. A floater fabricated by welding of 3.5-mm-thick sheet of grade 2 Ti into a thick-walled cylinder to indicate the level of a liquid mixture of isobutane, neobutane and neopentane in a petrochemical plant has lost its structural integrity by puncturing, cracking and blistering particularly at the section in contact with the liquid. The damage has been most severe in the base metal adjacent to the weld. Detailed microstructural characterization of the damaged floater and unwelded section of the same material has been carried out using scanning electron microscopy combined with energy dispersive spectroscopy, x-ray diffraction and transmission electron microscopy, and the results have been complemented by stress analysis and microhardness measurements. It is shown that the mechanical strength of the floater has been degraded by a combination of excessive absorption of hydrogen during welding and rapid cooling from the β-phase field aided by the stresses generated by the liquid pressure. Absorption of hydrogen and rapid cooling are found to alter the desirable morphology of equiaxed grains of α-phase into a multi-phase structure with fine platelet-type morphology. The base metal adjacent to the weld is found to contain the brittle δ-phase of titanium hydride in a low-ductility matrix of α-Ti with some β-Ti. However, β-Ti is found to be the predominant constituent of the weld.

  7. Assessment of soil organic contamination in a typical petrochemical industry park in China.

    Science.gov (United States)

    Teng, Yong; Zhou, Qixing; Miao, Xinyu; Chen, Yuming

    2015-07-01

    The concentrations of total petroleum hydrocarbons (TPH), n-alkanes (n-C8 through n-C40), and 16 polycyclic aromatic hydrocarbons (PAHs) in soils were determined to assess the level of organic contamination in soils from the Da-gang Petrochemical Industry Park with several big state-run enterprises, a recent rapid flourishing park in China. The results showed that the concentration of TPH in soil was high, up to 20 ng/g-12.8478%; in particular, the content in most sites ranged from 1 to 2%. Thus, it is clear that soil environment in the Da-gang Petrochemical Industry Park has been seriously polluted by TPH according to the Nemerow pollution index method. Furthermore, the average concentration of Σ(n-C>16 through n-C34) in 30 sampling sites was above the maximum limit set for F3 under all the conditions in the Canada-wide standards for petroleum hydrocarbons (PHC CWS) with 43.33-93.33% soil samples exceeding F3 standards, and n-alkanes possessing higher concentrations were proved much abundant alkanes in this study. Besides, the predominance of even n-alkanes and lower carbon preference index (CPI) demonstrated that n-alkanes in surface soils were mainly caused by anthropogenic inputs, while the concentration of Σ16-PAHs was in the range of 1652.5-8217.3 ng/g and the BaA/(BaA + Chr) and Flu/(Flu + Pyr) ratios indicated that pyrogenic PAHs may be the dominant PAHs in most soils with the contribution of petrogenic hydrocarbons in some sites.

  8. The use of plasticizing additives based on recycled raw materials in the petrochemical rubber mixtures

    Directory of Open Access Journals (Sweden)

    Z. S. Shashok

    2016-01-01

    Full Text Available At present, the development of alternative products for elastomers based on recycling petrochemical raw materials is a new trend of the rubber industry progress. Petrochemical raw materials include spent lubricants and motor oils are among such recycling products. In this context, the influence of the products of recycling waste engine oil (DVCH and RA in comparison with industrial oil (I-20 on the technological properties of filled elastomeric compositions was investigated. The elastomeric compositions were based on poly isoprene and divinyl rubbers. The plasticizing components were manufactured by IOOO “DVCH-Menedzhment”. They are mixture of hydro-carbons, C16–C20 and differ from each other in the content of linear and branched paraffin. Plastic-elastic properties of rubber compounds on the shear disk viscometer MV2000 in accordance with GOST 10722–76 was carried out. Kinetics of vulcanization on the rheometer ODR2000 according to GOST 12535–84 was defined. It is shown that the introduction of RA test plasticizing component provides a significant effect on Mooney viscosity, as compared to elastomeric compositions containing a plasticizer and I-20 and plasticizing additive DVCH. It revealed that the administration of all components in the studied plasticizing elastomer compositions based on a combination poly isoprene and divinyl rubbers has no significant effect on the rate of relaxation of stress of rubber compounds. It is found that elastomeric compositions containing as additives investigated processing waste oil products (DVCH and RA are characterized by a slightly smaller value of time to reach an optimal degree of vulcanization.

  9. The relationship between emotional intelligence and leadership styles in the South African petrochemical industry

    Directory of Open Access Journals (Sweden)

    Maggie Pillay

    2013-01-01

    Full Text Available Orientation: Although research on emotional intelligence in the context of leadership has remained a recurrent area of interest in theory and practice during the past decade, ongoing debate continues regarding the contribution of emotional intelligence to the understanding of leadership.Research purpose: The aim of this study was to determine the relationship between self-reported emotional intelligence and leadership styles in a South African context and to determine whether emotional intelligence can predict an effective leadership style.Motivation for the study: Research is needed in order to determine a more detailed relationship between emotional intelligence and leadership in the dynamic and globalising South African petrochemical context.Research design, approach and method: The study was conducted in terms of a positivist paradigm, using quantitative research instruments. Leaders (N = 161 were selected from a business unit in a South African petrochemical organisation. Self-reports from the emotional quotient inventory and the Multifactor Leadership Questionnaire (MLQ Form 5X, Version 2009 were analysed. Correlation analyses indicated statistically-significant relationships between emotional intelligence and transformational and laissez-faire leadership.Main findings: Findings indicated positive correlations between self-reported emotional intelligence (specifically adaptability and transformational leadership. Negative correlations were obtained between emotional intelligence (specifically intrapersonal skills and laissez-faire leadership. The research also showed differences between specific demographic variables.Practical/managerial implications: This study provides valuable significance for organisations’ endeavours in improving, training and identifying alternative selection and assessment procedures for evaluating leaders’ strengths.Contribution/value-add: This research contributes to the South African research on emotional

  10. Control of ammonia and urea emissions from urea manufacturing facilities of Petrochemical Industries Company (PIC), Kuwait.

    Science.gov (United States)

    Khan, A R; Al-Awadi, L; Al-Rashidi, M S

    2016-06-01

    Petrochemical Industries Company (PIC) in Kuwait has mitigated the pollution problem of ammonia and urea dust by replacing the melting and prilling units of finished-product urea prills with an environmentally friendly granulation process. PIC has financed a research project conducted by the Coastal and Air Pollution Program's research staff at the Kuwait Institute for Scientific Research to assess the impact of pollution control strategies implemented to maintain a healthy productive environment in and around the manufacturing premises. The project was completed in three phases: the first phase included the pollution monitoring of the melting and prilling units in full operation, the second phase covered the complete shutdown period where production was halted completely and granulation units were installed, and the last phase encompassed the current modified status with granulation units in full operation. There was substantial decrease in ammonia emissions, about 72%, and a 52.7% decrease in urea emissions with the present upgrading of old melting and prilling units to a state-of-the-art technology "granulation process" for a final finished product. The other pollutants, sulfur dioxide (SO2), nitrogen oxides (NOx), and volatile organic compounds (VOCs), have not shown any significant change, as the present modification has not affected the sources of these pollutants. Petrochemical Industries Company (PIC) in Kuwait has ammonia urea industries, and there were complaints about ammonia and urea dust pollution. PIC has resolved this problem by replacing "melting and prilling unit" of final product urea prills by more environmentally friendly "granulation unit." Environmental Pollution and Climate Program has been assigned the duty of assessing the outcome of this change and how that influenced ammonia and urea dust emissions from the urea manufacturing plant.

  11. Water availability for development of major tar sands areas in Utah

    Energy Technology Data Exchange (ETDEWEB)

    Keefer, T.N.; McQuivey, R.S.

    1979-05-01

    The Sutron Corporation, under contract with Colorado State University, has conducted a study for the Laramie Energy Technology Center (LETC) to determine the availability of water for future extraction of viscous petroleum (bitumen) from the six major tar sands deposits in Utah. Specifically, the areas are: Asphalt Ridge and Whiterocks, which lie immediately west of Vernal, Utah; P.R. Spring, a large area extending from the Colorado River to the White River along Utah's eastern border; Hill Creek, adjacent to P.R. Spring to the west; Sunnyside, immediately across the Green River from Hill Creek between the Price and Green Rivers; and Tar Sand Triangle, near the confluence of the Colorado and Dirty Devil Rivers. The study, conducted between September and December of 1978, was a fact-finding effort involving the compilation of information from publications of the US Geological Survey (USGS), Utah State Engineer, Utah Department of Natural Resources, and other federal and state agencies. The information covers the general physiographic and geologic features of the total area, the estimated water requirements for tar sands development, the availability of water in each of the six areas, and the legal and sociological restraints and impacts. The conclusions regarding water availability for tar sands development in each of the six areas and specific recommendations related to the development of each area are presented also.

  12. Experimenting with Inexpensive Plastic Springs

    Science.gov (United States)

    Perez, Leander; Marques, Adriana; Sánchez, Iván

    2014-01-01

    Acommon undergraduate laboratory experience is the determination of the elastic constant of a spring, whether studying the elongation under a static load or studying the damped harmonic motion of the spring with a suspended mass. An alternative approach to this laboratory experience has been suggested by Menezes et al., aimed at studying the…

  13. Mallow Springs, County Cork, Ireland

    Science.gov (United States)

    Aldwell, C. R.

    1996-03-01

    Because of its copious and reliable rainfall, Ireland has an abundance of springs. Many of the larger ones issue from the Carboniferous limestone that occurs in over 40% of the country. The spring water is mainly a calcium bicarbonate type with a temperature of about 10°C. In the 18th century, warm and cold springs were developed as spas in various parts of Ireland. The popularity of these springs was short and most were in major decline by 1850. Today only one cold spa at Lisdoonvarna, Co. Clare is still operating. Springs in Ireland were places of religious significance for the pre-Christian Druidic religion. In the Christian period they became holy wells, under the patronage of various saints. Cures for many different ailments were attributed to water from these wells.

  14. Evaluation of Durability Parameters of Concrete with Manufacture Sand and River Sand

    Science.gov (United States)

    Sangoju, Bhaskar; Ramesh, G.; Bharatkumar, B. H.; Ramanjaneyulu, K.

    2017-06-01

    Most of the states in our country have banned sand quarrying from the river beds, causing a scarcity of natural river sand for the construction sector. Manufacture sand (M-sand) is one of the alternate solutions to replace the river sand (R-sand) in concrete. The main aim of the present study is to evaluate the durability parameters of concrete with M-sand when compared to that of concrete with R-sand. Corrosion of reinforcement is one of the main deteriorating mechanisms of reinforced concrete due to the ingress of chloride ions or carbon-di-oxide. For comparative evaluation of durability parameters, accelerated tests such as Rapid Chloride Permeability Test, Rapid Chloride Migration Test and accelerated carbonation test were carried out on specimens of R-sand and M-sand. All tests were carried out after 90 days of casting. Test results reveal that the durability parameters of the concrete with M-sand in chloride induced environment is relatively better than that of concrete with R-sand and hence is recommended to use M-sand as a replacement to R-sand.

  15. Sand deposit-detecting method and its application in model test of sand flow

    Institute of Scientific and Technical Information of China (English)

    黎伟; 房营光; 莫海鸿; 谷任国; 陈俊生

    2013-01-01

    Against the background of the sand-flow foundation treatment engineering of Guangzhou Zhoutouzui variable cross-section immersed tunnel, a kind of sand deposit-detecting method was devised on the basis of full-scale model test of sand-flow method. The real-time data of sand-deposit height and radius were obtained by the self-developed sand-deposit detectors. The test results show that the detecting method is simple and has high precision. In the use of sand-flow method, the sand-carrying capability of fluid is limited, and sand particles are all transported to the sand-deposit periphery through crater, gap and chutes after the sand deposit formed. The diffusion range of the particles outside the sand-deposit does not exceed 2.0 m. Severe sorting of sand particles is not observed because of the unique oblique-layered depositing process. The temporal and spatial distributions of gap and chutes directly affect the sand-deposit expansion, and the expansion trend of the average sand-deposit radius accords with quadratic time-history curve.

  16. Spring comes for ATLAS

    CERN Multimedia

    Butin, F.

    2004-01-01

    (First published in the CERN weekly bulletin 24/2004, 7 June 2004.) A short while ago the ATLAS cavern underwent a spring clean, marking the end of the installation of the detector's support structures and the cavern's general infrastructure. The list of infrastructure to be installed in the ATLAS cavern from September 2003 was long: a thousand tonnes of mechanical structures spread over 13 storeys, two lifts, two 65-tonne overhead travelling cranes 25 metres above cavern floor, with a telescopic boom and cradle to access the remaining 10 metres of the cavern, a ventilation system for the 55 000 cubic metre cavern, a drainage system, a standard sprinkler system and an innovative foam fire-extinguishing system, as well as the external cryogenic system for the superconducting magnets and the liquid argon calorimeters (comprising, amongst other things, two helium refrigeration units, a nitrogen refrigeration unit and 5 km of piping for gaseous or liquid helium and nitrogen), not to mention the handling eq...

  17. A bountiful spring harvest

    CERN Multimedia

    2013-01-01

    Although we recently put the clocks forward and spring has officially begun, the view from my window looks more autumnal – befitting of the season of mists and mellow fruitfulness, rather than that of sowing seeds for the future. Which, in a way is appropriate. With the LHC paused, we are reaping a kind of harvest in the form of recognition for our efforts.   Two weeks ago, I was in Edinburgh, on behalf of everyone at CERN, to collect the Edinburgh medal, which we shared with Peter Higgs. I particularly like the citation for this honour: “The Edinburgh Medal is awarded each year to men and women of science and technology whose professional achievements are judged to have made a significant contribution to the understanding and well-being of humanity.” I like this, because it underlines a fact that needs to be shouted louder – that fundamental science does more than build the sum of human knowledge, it is also the foundation of human well-being. A few d...

  18. SAND

    DEFF Research Database (Denmark)

    Thorsen, Grete

    Der er udført et konsolideringsforsøg med bakkesand fra Lunds grusgrav, Lund no. O. forsøget er udført i samme konsolideringsapparat, som er anvendt til måling af deformationsegenskaberne af mange forskellige danske jordarter. Forsøgsresultaterne er søgt tolket som ved forsøg med andre jordarter....

  19. [Study on the quantitative estimation method for VOCs emission from petrochemical storage tanks based on tanks 4.0.9d model].

    Science.gov (United States)

    Li, Jing; Wang, Min-Yan; Zhang, Jian; He, Wan-Qing; Nie, Lei; Shao, Xia

    2013-12-01

    VOCs emission from petrochemical storage tanks is one of the important emission sources in the petrochemical industry. In order to find out the VOCs emission amount of petrochemical storage tanks, Tanks 4.0.9d model is utilized to calculate the VOCs emission from different kinds of storage tanks. VOCs emissions from a horizontal tank, a vertical fixed roof tank, an internal floating roof tank and an external floating roof tank were calculated as an example. The consideration of the site meteorological information, the sealing information, the tank content information and unit conversion by using Tanks 4.0.9d model in China was also discussed. Tanks 4.0.9d model can be used to estimate VOCs emissions from petrochemical storage tanks in China as a simple and highly accurate method.

  20. Petrochemical industries diagnosis concerning competition, quality and productivity programs; Diagnostico de industrias petroquimicas face aos programas de competitividade, produtividade e qualidade

    Energy Technology Data Exchange (ETDEWEB)

    Souza Antunes, Adelaide Maria de; Chamas, Claudia Ines [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia

    1992-12-31

    The objective of this study is to evaluate how brazilian petrochemical industries take technological and competitive strategies. New industrial policy emphasizes quality, productivity and competitiveness aspects. The sector company survival depends on fitting to competition patterns. (author) 6 refs.

  1. The automotive gasoline quality evaluation formulated from different petrochemical streams; Avaliacao da qualidade da gasolina automotiva formulada a partir de diferentes correntes petroquimicas

    Energy Technology Data Exchange (ETDEWEB)

    Reboucas, Marcio das Virgens [Braskem, Camacari, BA (Brazil). Unidade de Insumos Basicos. Laboratorio]. E-mail: marcio.reboucas@braskem.com.br; Gomes, Amenson Trindade [Bahia Univ. , Salvador, BA (Brazil). Inst. de Quimica]. E-mail: amenson@copene.com.br; Teixeira, Leonardo Sena Gomes [Universidade Salvador - UNIFACS, Salvador, BA (Brazil). Dept. de Engenharia e Arquitetura]. E-mail: leonardoteixeira@unifacs.br

    2003-07-01

    By the end of the year 2000, ANP (the Brazilian federal petroleum agency) authorized petrochemical industries to produce and formulate gasoline from petrochemical streams. Since then, refineries are not the exclusive players in the fuels market anymore. Therefore, technical works concerning the processing and blending of refineries and petrochemical streams used for fuels production has gained special attention. In the present work the influence of saturates and aromatic compounds on the most important fuel chemical properties has been investigated. The quality of several blends, formulated in the lab from different petrochemical streams, were evaluated by means of physical and chemical characterization essays. The results of distillation, octane numbers, specific gravity, gum and chemical composition were compared to the specification limits established by brazilian regulation for gasoline production and trading in Brazil. (author)

  2. SPRING FESTIVAL ON THE LOESS PLATEAU

    Institute of Scientific and Technical Information of China (English)

    亦西; 杨延康

    2005-01-01

    How Spring Festival is celebrated Although the date of the Spring Festival was switched from the beginning of spring to the first day of the first lunar month, the main ways of celebrating it, from bygone days, remain popular.

  3. Liquefaction of Sand under Low Confining Pressure

    Institute of Scientific and Technical Information of China (English)

    YANG Shaoli; Rolf Sandven; Lars Grande

    2003-01-01

    Undrained behaviour of sand under low cell pressure was studied in static and cyclic triaxial tests. It was found that very loose sand liquefies under static loading with the relative density being a key parameter for the undrained behaviour of sand. In cyclic triaxial tests, pore water pressures built up during the cyclic loading and exceeded the confining cell pressure. This process was accompanied by a large sudden increase in axial deformation. The necessary number of cycles to obtain liquefaction was related to the confining cell pressure, the amplitude of cyclic loading and the relative density of sand.In addition, the patterns of pore water pressure response are different from those of sand samples with different relative densities. The test results are very useful for expounding scour mechanism around coastal structures since they relate to the low stress behaviour of the sand.

  4. Creep Behavior of Frozen Sand.

    Science.gov (United States)

    1981-06-01

    temperature and stress range. There was a 2strong stress dependance to S (r =0.95) for saturated Manchester Fine Sand which does not agree with RPT. The...Curves at High Stress 161 Ratio D/Du = 0.505 for Frozen HF’S at w=10% IV-20 Minimum Strain Rate Dependance on Stress 162 Ratio for Frozen MFS IV-21 Minimum...Strain Rate Dependance on Relative 163 Density for Frozen MFS IV-22 Temperature Stage Test on Frozen Saturated 164 MFS under a Load of D=9.24MPa Fig

  5. Groundwater flow cycling between a submarine spring and an inland fresh water spring

    Science.gov (United States)

    Davis, J. Hal; Verdi, Richard

    2014-01-01

    Spring Creek Springs and Wakulla Springs are large first magnitude springs that derive water from the Upper Floridan Aquifer. The submarine Spring Creek Springs are located in a marine estuary and Wakulla Springs are located 18 km inland. Wakulla Springs has had a consistent increase in flow from the 1930s to the present. This increase is probably due to the rising sea level, which puts additional pressure head on the submarine Spring Creek Springs, reducing its fresh water flow and increasing flows in Wakulla Springs. To improve understanding of the complex relations between these springs, flow and salinity data were collected from June 25, 2007 to June 30, 2010. The flow in Spring Creek Springs was most sensitive to rainfall and salt water intrusion, and the flow in Wakulla Springs was most sensitive to rainfall and the flow in Spring Creek Springs. Flows from the springs were found to be connected, and composed of three repeating phases in a karst spring flow cycle: Phase 1 occurred during low rainfall periods and was characterized by salt water backflow into the Spring Creek Springs caves. The higher density salt water blocked fresh water flow and resulted in a higher equivalent fresh water head in Spring Creek Springs than in Wakulla Springs. The blocked fresh water was diverted to Wakulla Springs, approximately doubling its flow. Phase 2 occurred when heavy rainfall resulted in temporarily high creek flows to nearby sinkholes that purged the salt water from the Spring Creek Springs caves. Phase 3 occurred after streams returned to base flow. The Spring Creek Springs caves retained a lower equivalent fresh water head than Wakulla Springs, causing them to flow large amounts of fresh water while Wakulla Springs flow was reduced by about half.

  6. Groundwater flow cycling between a submarine spring and an inland fresh water spring.

    Science.gov (United States)

    Davis, J Hal; Verdi, Richard

    2014-01-01

    Spring Creek Springs and Wakulla Springs are large first magnitude springs that derive water from the Upper Floridan Aquifer. The submarine Spring Creek Springs are located in a marine estuary and Wakulla Springs are located 18 km inland. Wakulla Springs has had a consistent increase in flow from the 1930s to the present. This increase is probably due to the rising sea level, which puts additional pressure head on the submarine Spring Creek Springs, reducing its fresh water flow and increasing flows in Wakulla Springs. To improve understanding of the complex relations between these springs, flow and salinity data were collected from June 25, 2007 to June 30, 2010. The flow in Spring Creek Springs was most sensitive to rainfall and salt water intrusion, and the flow in Wakulla Springs was most sensitive to rainfall and the flow in Spring Creek Springs. Flows from the springs were found to be connected, and composed of three repeating phases in a karst spring flow cycle: Phase 1 occurred during low rainfall periods and was characterized by salt water backflow into the Spring Creek Springs caves. The higher density salt water blocked fresh water flow and resulted in a higher equivalent fresh water head in Spring Creek Springs than in Wakulla Springs. The blocked fresh water was diverted to Wakulla Springs, approximately doubling its flow. Phase 2 occurred when heavy rainfall resulted in temporarily high creek flows to nearby sinkholes that purged the salt water from the Spring Creek Springs caves. Phase 3 occurred after streams returned to base flow. The Spring Creek Springs caves retained a lower equivalent fresh water head than Wakulla Springs, causing them to flow large amounts of fresh water while Wakulla Springs flow was reduced by about half. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.

  7. Recent advances in waterglass sand technologies

    Institute of Scientific and Technical Information of China (English)

    ZHU Chun-xi

    2007-01-01

    This paper reports some new understandings and advances in waterglass sand technologies. The multiple chemical modification process can increase the binding strength of the waterglass sand by up to 50%-70%.Therefore, the additions of the modified waterglass can be decreased to 3.0%-4.0% for CO2 process and to 2.0%-2.5% for organic ester hardening process, and greatly improve the collapsibility and reclaimability of the sand. Based on the new understandings and experimental results reported in this paper, several original ideas, such as nano modification, have been proposed to promote advances of waterglass sand technologies,

  8. PROSPECTS FIXATION DRIFT SANDS PHYSICOCHEMICAL METHOD

    Directory of Open Access Journals (Sweden)

    Maujuda MUZAFFAROVA

    2016-09-01

    Full Text Available This article is based on the theoretical foundations of secure mobile sand being considered for reducing the negative impact of one of the manifestations of exogenous plains on such an important natural-technical system as a railroad. It suggests practical measures to build a system of design protection against sand drifts. The article also suggests ways to conserve resources and rational use of machinery and performers as well as the consolidation of mobile sand wet with water soluble waste of local production of waste dextrin. Consolidation is exposed on dry and wet sand.

  9. Innovative developments in sand reclamation technologies

    Directory of Open Access Journals (Sweden)

    R. Dañko

    2011-04-01

    Full Text Available Proper sand management and efficient sand reclamation system are two main factors influencing economical and ecological side of modern foundry plant. It is well known fact that the production of 1 metric ton of casting from ferrous alloys generates circa 1 metric ton of waste [1], which due to containing certain amounts of harmful and dangerous compounds should undergo a reclamation – at least of the main component, which means a silica sand grains. The paper present problems of scientific and development research concerning the innovative reclamation technologies of used foundry sands such as: mechanical-cryogenic reclamation and innovative thermal reclamation.

  10. Fish Springs weather CY 2011

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Weather data for calendar year 2011 at Fish Springs National Wildlife Refuge. Data is provided for each month and includes maximum temperature, minimum temperature,...

  11. Fish Springs weather CY 2010

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Weather data for calendar year 2010 at Fish Springs National Wildlife Refuge. Data is provided for each month and includes maximum temperature, minimum temperature,...

  12. Steller's Eider spring migration surveys

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Annual spring aerial surveys were conducted most years from 1992 to 2008, to monitor the population status and habitat use of Steller's eiders (Polysticta stelleri)...

  13. Report on Fish Springs - 1958

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document discusses field survey results from several trips to Fish Springs National Wildlife Refuge during the summer of 1958. The following information is...

  14. Proceedings of the 3. International conference on waste management in the chemical and petrochemical industries. Volume 1 and 2.

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Francisco F.; Pereira Filho, Francisco A.; Almeida, Sergio A.S. [eds.

    1993-12-31

    To produce without pollution is today a mandate for the preservation of our society. To produce cleaner means to conserve energy and natural resources, to reduce the use of toxic substances, to invest in the evolution of products and production processes towards a minimum of residues. The Third International Conference on Waste Minimization in the Chemical and Petrochemical Industries addresses these challenging questions regarding waste minimization

  15. Time-Lagging Interplay Effect and Excess Risk of Meteorological/Mosquito Parameters and Petrochemical Gas Explosion on Dengue Incidence

    OpenAIRE

    Ko Chang; Chaur-Dong Chen; Chien-Ming Shih; Tzu-Chi Lee; Ming-Tsang Wu; Deng-Chyang Wu; Yen-Hsu Chen; Chih-Hsing Hung; Meng-Chieh Wu; Chun-Chi Huang; Chien-Hung Lee; Chi-Kung Ho

    2016-01-01

    In Kaohsiung, a metropolitan city in Taiwan at high risk of dengue epidemic, weather factors combined with an accidental petrochemical gas explosion (PGE) may affect mosquito‒human dynamics in 2014. Generalized estimating equations with lagged-time Poisson regression analyses were used to evaluate the effect of meteorological/mosquito parameters and PGE on dengue incidences (2000–2014) in Kaohsiung. Increased minimum temperatures rendered a 2- and 3-month lagging interactive effect on higher ...

  16. The petrochemical industry versus the transformers. Allays or enemies?; A industria petroquimica versus transformadores. Aliados ou inimigos?

    Energy Technology Data Exchange (ETDEWEB)

    Eigner, Gabriel [Girassol Industria e Comercio de Plasticos Ltda., Sao Paulo, SP (Brazil)

    1992-12-31

    The existing different realities between the two companies environment focused, on one side the big petrochemical plants and on the other side, the transformer ones, most of them small and middle companies produces unlike views in terms of the management of these companies. The present economical conjuncture requires an urgent alteration of this procedure, in order to favour improvements in rentability and competitivity in both segments, as well as to provide a more adjusted basis of business expansion and development. (author)

  17. Construction of 1.0 Mt/a Aromatics Unit Kicked off at PetroChina's Urumqi Petrochemical Complex

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ One of the major aromatics projects at the PetroChina Urumqi Petrochemical Company - the construction of 1.0 Mt/a paraxylene/aromatics integrated unit was officially kicked off on May 1, 2008 in Urumqi. The investment in this unit totals 3.867 billion RMB, making this unit the larg-est single-series one-million-ton-class aromatics integrated unit among the world's similar units.

  18. Industrial cluster governance in a developing country context: evidence from the petrochemical sector in the Mexican state of Veracruz

    OpenAIRE

    Duhalt Gomez, Adrian

    2011-01-01

    This thesis combines analysis of the political economy of Mexico with the global value chain approach to study the trajectory of the development of the Veracruz cluster and the governance structure of vertical inter-firm relationships in the locality.\\ud The petrochemical cluster located in the state of Veracruz is formed by a pool of state-owned and local private companies and is arguably the largest agglomeration of industrial firms in southern Mexico. These firms are linked to one another ...

  19. Ecological impact of Mahshahr petrochemical activities on abundance and diversity of macrobenthic fauna in Zangi Creek (Persian Gulf)

    OpenAIRE

    Manuchehri, Hamed

    2007-01-01

    The Moosa Creek extends from its opening into the Persian Gulf, with some sub narrow creeks leading to it. Zangi creek is one of the main branches of Moosa creek. The creek contains numerous sources of organic pollution, including sewage outlet flows and boat waste. After establishing the Petrochemical special Economic Zone (PETZONE) in 1997 near to the Zangi Creek, the pipelines, streets and railway made it distinct from eastern and western parts of this creek. Industrial acti...

  20. IDENTIFICATION AND CLASSIFICATION OF INDUSTRIAL SOLID WASTES IN AMMONIA UNIT OF RAZI PETROCHEMICAL COMPLEX AND FEASIBILITY OF WASTE MINIMIZATION

    Directory of Open Access Journals (Sweden)

    F. Fakheri Raouf, R. Nabizadeh and N. Jafarzadeh

    2005-10-01

    Full Text Available Petrochemical industries are considered as strategic and important sectors in economic development of Iran. Razi petrochemical factory is one of complex in Iran, established in 1970 with 100 hectare. In this research, the possibility of waste minimization in the ammonia unit of Razi petrochemical complex with about 1000 tons per year was studied for a period of 18 months from September 2003 to April 2005. More than 20 site visits were conducted and the required information was collected. Factors such as industrial solid wastes quality and quantity, sources of generation, production period and the present management practice, were studied. Petrochemical solid wastes were classified based on the recommended method of the United Nations and appropriate policies were suggested for waste minimization. The collected results of this study show production of 185 tons of industrial solid wastes from 45 sources which contained 68.5% catalysts, 10.25% metal barrels, 18.61% aluminum ball, 2.62% plastic barrels and 0.02% paper. 93.3% of these wastes were generated as the result of catalysts change, 3.3% as the result of using chemicals and oils, 1.7% as the result of methanol solution amid application, and 1.1% because of aluminum ball changes. Based on the UNEP methods, the ammonia unit wastes classified as 19/7%hazadrous and 87,12% non hazardous. At present 87.12% of these wastes are being dumped in the area and 12.88% are sold. Proposed procedures for waste minimization contain 68.5% reuse and recycling and 31.5% recycling.

  1. Sand Failure Mechanism and Sanding Parameters in Niger Delta Oil Reservoirs

    OpenAIRE

    Sunday Isehunwa,; Andrew Farotade

    2010-01-01

    Sand production is a major issue during oil and gas production from unconsolidated reservoirs. In predicting the onset of sand production, it is important to accurately determine the failure mechanism and the contributing parameters. The aim of this study was to determine sand failure mechanism in the Niger-Delta, identify themajor contributing parameters and evaluate their effects on sanding.Completion and production data from 78 strings completed on 22 reservoirs in a Niger Delta oil Field ...

  2. Satellite Based Analysis of Carbon Monoxide Levels Over Alberta Oil Sand

    Science.gov (United States)

    Marey, H. S.; Hashisho, Z.; Fu, L.; Gille, J. C.

    2014-12-01

    The rapid expansion of oil sands activities and massive energy requirements to extract and upgrade the bitumen require a comprehensive understanding of their potential environmental impacts, particularly on air quality. In this study, satellite-based analysis of carbon monoxide (CO) levels was used to assess the magnitude and distribution of this pollutant throughout Alberta oil sands region. Measurements of Pollution in the Troposphere (MOPITT) V5 multispectral product that uses both near-infrared and the thermal-infrared radiances for CO retrieval were used. MOPITT-based climatology and inter-annual variations were examined for 12 years (2002-2013) on spatial and temporal scales. Seasonal climatological maps for CO total columns indicated conspicuous spatial variations in all seasons except in winter where the CO spatial variations are less prominent. High CO loadings are observed to extend from the North East to North West regions of Alberta, with highest values in spring. The CO mixing ratios at the surface level in winter and spring seasons exhibited dissimilar spatial distribution pattern where the enhancements are detected in south eastern rather than northern Alberta. Analyzing spatial distributions of Omega at 850 mb pressure level for four seasons implied that, conditions in northeastern Alberta are more favorable for up lofting while in southern Alberta, subsidence of CO emissions are more likely. Time altitude CO profile climatology as well as the inter-annual variability were investigated for the oil sands and main urban regions in Alberta to assess the impact of various sources on CO loading. Monthly variations over urban regions are consistent with the general seasonal cycle of CO in Northern Hemisphere which exhibits significant enhancement in winter and spring, and minimum mixing ratios in summer. The typical seasonal CO variations over the oil sands region are less prominent. This study has demonstrated the potential use of multispectral CO

  3. Personnel reliability impact on petrochemical facilities monitoring system's failure skipping probability

    Science.gov (United States)

    Kostyukov, V. N.; Naumenko, A. P.

    2017-08-01

    The paper dwells upon urgent issues of evaluating impact of actions conducted by complex technological systems operators on their safe operation considering application of condition monitoring systems for elements and sub-systems of petrochemical production facilities. The main task for the research is to distinguish factors and criteria of monitoring system properties description, which would allow to evaluate impact of errors made by personnel on operation of real-time condition monitoring and diagnostic systems for machinery of petrochemical facilities, and find and objective criteria for monitoring system class, considering a human factor. On the basis of real-time condition monitoring concepts of sudden failure skipping risk, static and dynamic error, monitoring systems, one may solve a task of evaluation of impact that personnel's qualification has on monitoring system operation in terms of error in personnel or operators' actions while receiving information from monitoring systems and operating a technological system. Operator is considered as a part of the technological system. Although, personnel's behavior is usually a combination of the following parameters: input signal - information perceiving, reaction - decision making, response - decision implementing. Based on several researches on behavior of nuclear powers station operators in USA, Italy and other countries, as well as on researches conducted by Russian scientists, required data on operator's reliability were selected for analysis of operator's behavior at technological facilities diagnostics and monitoring systems. The calculations revealed that for the monitoring system selected as an example, the failure skipping risk for the set values of static (less than 0.01) and dynamic (less than 0.001) errors considering all related factors of data on reliability of information perception, decision-making, and reaction fulfilled is 0.037, in case when all the facilities and error probability are under

  4. Evaluation of open path measuring techniques for petrochemicals NMVOC emissions : DIAL applications in Sweden and Texas

    Energy Technology Data Exchange (ETDEWEB)

    Cuclis, A.; Frisch, L.; Byun, D. [Houston Univ., Houston, TX (United States)

    2003-07-01

    Various emissions factors have been used over the past twenty years to calculate the emissions of volatile organic compounds (VOC) generated by refineries and chemical plants. Emissions inventories in Canada, the United States and Europe are created based on these estimating techniques. Petrochemical facilities have at their disposal the following 4 open path spectroscopic methods for measuring VOCs: Open Path Fourier Transform Infrared (OP-FTIR), Differential Optical Absorption Spectroscopy (DOAS), Tunable Diode Laser Absorption Spectroscopy (TDLAS), and Differential Absorption Light Detection and Ranging (DIAL LIDAR or DIAL). The authors reviewed the 4 open path techniques and evaluated their ability to produce results for the creation of accurate accounting of VOCs in petrochemical facilities. The application of DIAL technology in both Sweden (Scanraff refinery in Lysekil, the largest in Sweden) and Texas (Houston-Gavelston area) to identify emissions was discussed in detail. The capability of creating two- and three-dimensional plots of concentrations and identifying the locations of leaks or hot spots is a major advantage of DIAL, even if it remains an expensive and complicated solution. The advantage of OP-FTIR is to be able to speciate several different compounds in a VOC filled atmosphere. However, a number of interfering compounds are also present adding to the difficulty of proper field operation. Capable of achieving very low detection limits, DOAS is the simplest of the technologies, but it has the disadvantage of identifying fewer compounds than OP-FTIR or DIAL. The most accurate technology for the identification of specific species is TDLAS with its high resolution. The requirement to generally use a separate laser for each component to be measured is a drawback. A separate transmitter and detector, or the use of retro-reflectors to return the signal back to the detector is required for OP-FTIR, DOAS and TDLAS. Reflections from particles in the gas

  5. The Effect of Social Trust on Citizens’ Health Risk Perception in the Context of a Petrochemical Industrial Complex

    Science.gov (United States)

    López-Navarro, Miguel Ángel; Llorens-Monzonís, Jaume; Tortosa-Edo, Vicente

    2013-01-01

    Perceived risk of environmental threats often translates into psychological stress with a wide range of effects on health and well-being. Petrochemical industrial complexes constitute one of the sites that can cause considerable pollution and health problems. The uncertainty around emissions results in a perception of risk for citizens residing in neighboring areas, which translates into anxiety and physiological stress. In this context, social trust is a key factor in managing the perceived risk. In the case of industrial risks, it is essential to distinguish between trust in the companies that make up the industry, and trust in public institutions. In the context of a petrochemical industrial complex located in the port of Castellón (Spain), this paper primarily discusses how trust—both in the companies located in the petrochemical complex and in the public institutions—affects citizens’ health risk perception. The research findings confirm that while the trust in companies negatively affects citizens’ health risk perception, trust in public institutions does not exert a direct and significant effect. Analysis also revealed that trust in public institutions and health risk perception are essentially linked indirectly (through trust in companies). PMID:23337129

  6. Carbonaceous materials in petrochemical wastewater before and after treatment in an aerated submerged fixed-bed biofilm reactor

    Directory of Open Access Journals (Sweden)

    Trojanowicz Karol

    2016-09-01

    Full Text Available Results of the studies for determining fractions of organic contaminants in a pretreated petrochemical wastewater flowing into a pilot Aerated Submerged Fixed-Bed Biofilm Reactor (ASFBBR are presented and discussed. The method of chemical oxygen demand (COD fractionation consisted of physical tests and biological assays. It was found that the main part of the total COD in the petrochemical, pretreated wastewater was soluble organic substance with average value of 57.6%. The fractions of particulate and colloidal organic matter were found to be 31.8% and 10.6%, respectively. About 40% of COD in the influent was determined as readily biodegradable COD. The inert fraction of the soluble organic matter in the petrochemical wastewater constituted about 60% of the influent colloidal and soluble COD. Determination of degree of hydrolysis (DH of the colloidal fraction of COD was also included in the paper. The estimated value of DH was about 62%. Values of the assayed COD fractions were compared with the same parameters obtained for municipal wastewater by other authors.

  7. The process of technology acquisition by the Brazilian petrochemical industry; O processo de aquisicao de tecnologia pela industria petroquimica brasileira

    Energy Technology Data Exchange (ETDEWEB)

    Hemais, Carlos A.; Barros, Henrique M.; Pastorini, Mirela T. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Macromoleculas. Grupo de Gestao Tecnologica]. E-mail: hemais@ima.ufrj.br

    2001-12-01

    One of the most dynamic industrial sectors in Brazil, the petrochemical industry is located in three complexes (Camacari, Sao Paulo and Triunfo), and today it represents around 2 % of the Brazilian GNP. This industry was established in the country nearly 30 years ago as a governmental initiative, when the government adopted a tripartite model of a commercial society. In this model, 1/3 of the capital belonged to Petroquisa, 1/3 belonged to a Brazilian partner and 1/3 belonged to a foreign partner, usually the supplier of the technology through a joint venture. In spite of the fact that this industry is consolidated and has a large potential of exports, the petrochemical industry is still technologically dependent upon exogenous sources. Moreover, it seems that this dependency will not be eliminated in the near future. The present paper examines the process of technological acquisition by the Brazilian petrochemical industry, especially the use of joint ventures as the way chosen to obtain technology. (author)

  8. 2003 assessment of PCDDs-PCDFs emissions from the Copesul/South Petrochemical complex located in southern Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Deschamps, M.; Allard, J.L. [SNC-Lavalin Environment Inc., Montreal, PQ (Canada); Rangel, C.M.P.; Ribeiro, C.; Dos Santos, S.T.F. [Companhia Petroquimica do Sul, Triunfo (Brazil)

    2004-09-15

    COPESUL is the Raw Material and Utilities Central of the South Petrochemical Complex, this, being the most modern industrial facility of its type in Brazil, and the second largest naphtha cracker in the country. Responsible for more than 40% of Brazilian olefins production, it is also among the largest crackers (on the same site) in the world. The majority of COPESUL products are transformed by downstream industries of the Complex into thermoplastics resins, synthetic rubber, styrene and solvents that are widely used in the manufacturing of packing material (food, hygiene, cleaning), electronic appliances, medical and surgical supplies, toys and in the car industries, to be consumed in Brazil and foreign countries. At the request of the state of Rio Grande do Sul Environmental Protection Agency (Fundacao Estadual de Protecao Ambiental or FEPAM), an Environmental Assessment of Priority Pollutants (EAPP) was performed by Copesul at the end of the year 2003. EAPPs have been voluntarily performed at the Petrochemical Complex since 1986 on a basis of once every three year. It is now performed as a requirement which is part of the petrochemical plant operational license. Among the different (organic and inorganic) parameters tested, PCDDs-PCDFs remained a main concern to the local State Agency with regards to the Complex activities and of it's potential impact on the human health and the environment, despite the fact that the Complex does not use nor produce any organochlorinated product.

  9. Study of Black Sand Particles from Sand Dunes in Badr, Saudi Arabia Using Electron Microscopy

    Directory of Open Access Journals (Sweden)

    Haider Abbas Khwaja

    2015-08-01

    Full Text Available Particulate air pollution is a health concern. This study determines the microscopic make-up of different varieties of sand particles collected at a sand dune site in Badr, Saudi Arabia in 2012. Three categories of sand were studied: black sand, white sand, and volcanic sand. The study used multiple high resolution electron microscopies to study the morphologies, emission source types, size, and elemental composition of the particles, and to evaluate the presence of surface “coatings or contaminants” deposited or transported by the black sand particles. White sand was comprised of natural coarse particles linked to wind-blown releases from crustal surfaces, weathering of igneous/metamorphic rock sources, and volcanic activities. Black sand particles exhibited different morphologies and microstructures (surface roughness compared with the white sand and volcanic sand. Morphological Scanning Electron Microscopy (SEM and Laser Scanning Microscopy (LSM analyses revealed that the black sand contained fine and ultrafine particles (50 to 500 nm ranges and was strongly magnetic, indicating the mineral magnetite or elemental iron. Aqueous extracts of black sands were acidic (pH = 5.0. Fe, C, O, Ti, Si, V, and S dominated the composition of black sand. Results suggest that carbon and other contaminant fine particles were produced by fossil-fuel combustion and industrial emissions in heavily industrialized areas of Haifa and Yanbu, and transported as cloud condensation nuclei to Douf Mountain. The suite of techniques used in this study has yielded an in-depth characterization of sand particles. Such information will be needed in future environmental, toxicological, epidemiological, and source apportionment studies.

  10. Integration of Microalgae-Based Bioenergy Production into a Petrochemical Complex: Techno-Economic Assessment

    Directory of Open Access Journals (Sweden)

    Ana L. Gonçalves

    2016-03-01

    Full Text Available The rapid development of modern society has resulted in an increased demand for energy, mainly from fossil fuels. The use of this source of energy has led to the accumulation of carbon dioxide (CO2 in the atmosphere. In this context, microalgae culturing may be an effective solution to reduce the CO2 concentration in the atmosphere, since these microorganisms can capture CO2 and, simultaneously, produce bioenergy. This work consists of a techno-economic assessment of a microalgal production facility integrated in a petrochemical complex, in which established infrastructure allows efficient material and energy transport. Seven different scenarios were considered regarding photosynthetic, lipids extraction and anaerobic digestion efficiencies. This analysis has demonstrated six economically viable scenarios able to: (i reduce CO2 emissions from a thermoelectric power plant; (ii treat domestic wastewaters (which were used as culture medium; and (iii produce lipids and electrical and thermal energy. For a 100-ha facility, considering a photosynthetic efficiency of 3%, a lipids extraction efficiency of 75% and an anaerobic digestion efficiency of 45% (scenario 3, an economically viable process was obtained (net present value of 22.6 million euros, being effective in both CO2 removal (accounting for 1.1 × 104 t per year and energy production (annual energy produced was 1.6 × 107 kWh and annual lipids productivity was 1.9 × 103 m3.

  11. Study on Expansion of Steam Cracking Unit to 660 kt/a at Yanshan Petrochemical Company

    Institute of Scientific and Technical Information of China (English)

    Cao Xianghong

    2003-01-01

    Yanshan Petrochemical Company after having expanded its 300 kt/a steam cracking unit to 450 kt/a in 1994 is still experiencing such problems as low feedstock flexibility, high energy consumption and smaller scale of ethylene unit. In order to fully improve technical capability of steam crackers, reduce energy consumption, improve feedstock flexibility and increase production capacity, a lot of technical revamp cases on steam cracking were studied and compared. Revamp of relevant facilities has expanded the ethylene capacity to the target of 660 kt/a with the actual capacity reaching 710 kt/a. This revamp project has remarkably reduced the energy consumption, which is capable of using naphtha, light diesel fuel, heavy diesel fuel and the hydrocracked tail oil as the steam cracking feedstock. This project is the first to apply refrigeration by means of a mixed cooling agent and has succeeded in using C3 catalytic rectification/hydrogenation technology, which has given an impetus to the progress of steam cracking industry in the world.

  12. TG/DSC-FTIR and Py-GC investigation on pyrolysis characteristics of petrochemical wastewater sludge.

    Science.gov (United States)

    Chen, Jianbiao; Mu, Lin; Jiang, Bo; Yin, Hongchao; Song, Xigeng; Li, Aimin

    2015-09-01

    The pyrolysis characteristics of petrochemical wastewater sludge (PS) were evaluated using TG/DSC-FTIR and fixed-bed reactor with GC. TGA experiments indicated that the pyrolysis of PS proceeded in three phases, and the thermographs shifted to higher temperatures with increasing heating rate. Chars FTIR showed that the absorption of O-H, C-H, C=O and C-C decreased with pyrolysis temperatures increasing. Gases FTIR correspondingly showed that H2O, CO, and CH4 generated at higher temperatures. For the fixed-bed reactor tests, H2 and CO were relatively higher in the pyrolysis gases, and CH4 was negligible at 436K. The kinetic triplets of PS pyrolysis were estimated by Flynn-Wall-Ozawa, Kissinger-Akahira-Sunose, and integral master-plots method. The results suggested that the most potential kinetic models for the first and second phase were the order reaction model, while the random nucleation and nuclei growth model for the third phase.

  13. Qualitative and Quantitative Seismic Evaluation of Reinforced Concrete Structures in Petrochemical Plant

    Directory of Open Access Journals (Sweden)

    Fariborz Nateghi-A.

    2010-12-01

    Full Text Available In this paper the seismic evaluation of reinforced concrete structures in petrochemical facilities under sever conditions such as high pressure, high temperature and corrosive environment is studied. These structures were designed and constructed during 1976-78. The evaluation procedure is basically performed in two phases namely; a qualitative and b quantitative methods. In the qualitative evaluation, all possible documentations including drawings, specifications, structural calculations, new additions and test results were studied. Collected data then was summarized in an evaluation checklist. When the needed requirements did not meet the specified entries, more detailed and quantitative analysis were performed and utilized in this study. Quantitative and numerical study was performed using finite element modeling under sever loading combinations. Based on the results of this evaluation, some important RC structures in this plant were highly vulnerable to seismic forces which required immediate attention. The methodology used and results obtained can be generalized and adapted for similar facilities. This paper will present details, procedure and conclusions obtained.

  14. Petrochemical wastewater treatment with a pilot-scale bioaugmented biological treatment system

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In solving the deterioration of biological treatment system treating petrochemical wastewater under low temperatures,bioaugmentation technology was adopted by delivering engineering bacteria into a pilot-scale two-stage anoxic-oxic (A/O)process based on previous lab-scale study. Experimental results showed that when the concentrations of COD and NH4+-N of the influent were 370~910 mg/L and 10~70 mg/L, the corresponding average concentrations of those of effluent were about 80 mg/L and 8 mg/L respectively, which was better than the Level I criteria of the Integrated Wastewater Discharge Standard (GB8978-1996). According to GC-MS analysis of the effluents from both the wastewater treatment plant (WWTP) and the pilot system, there were 68 kinds of persistent organic pollutants in the WWTP effluent, while there were only 32 in that of the pilot system. In addition, the amount of the organics in the effluent of the pilot system reduced by almost 50% compared to that of the WWTP. As a whole, after bioaugmentation, the organic removal efficiency of the wastewater treatment system obviously increased.

  15. Study of Phase Equilibria of Petrochemical Fluids using Gibbs Ensemble Monte Carlo Methods

    Science.gov (United States)

    Nath, Shyamal

    2001-03-01

    Knowledge of phase behavior of hydrocarbons and related compounds are highly of interest to chemical and petrochemical industries. For example, design of processes such as supercritical fluid extraction, petroleum refining, enhanced oil recovery, gas treatment, and fractionation of wax products. A precise knowledge of the phase equilibria of alkanes, alkenes and related compounds and their mixtures are required for efficient design of these processes. Experimental studies to understand the related phase equilibria often become unsuitable for various reasons. With the advancement of simulation technology, molecular simulations could provide a useful complement and alternative in the study and description of phase behavior of these systems. In this work we study vapor-liquid phase equilibria of pure hydrocarbons and their mixtures using Gibbs ensemble simulation. Insertion of long and articulated chain molecules are facilitated in our simulations by means of configurational bias and expanded ensemble methods. We use the newly developed NERD force field in our simulation. In this work NERD force field is extended to provide coverage for hydrocarbons with any arbitrary architecture. Our simulation results provide excellent quantitative agreement with available experimental phase equilibria data for both the pure components and mixtures.

  16. Are Emissions Trading Policies Sustainable? A Study of the Petrochemical Industry in Korea

    Directory of Open Access Journals (Sweden)

    Yongrok Choi

    2016-10-01

    Full Text Available In 2015, Korea inaugurated an emissions trading scheme (ETS. In this regard, many studies have considered the sustainable performance and efficiency of industries that emit carbon; however, few have examined ETS at company level. This paper focuses on companies’ data related to Korean ETS in the petrochemical industry. Based on the non-radial, nonparametric directional distance function (DDF, the paper evaluates the governance factors related to ETS policies and sustainable performance in terms of carbon technical efficiency (CTE, the shadow price of carbon emissions, and Morishima elasticity between the input and undesirable output of carbon emissions. Using a dual model, the paper shows that Korean ETS has huge potential for participating companies to improve CTE. If all companies consider the production possibility frontier, they could potentially improve efficiency by 52.8%. Further, Morishima elasticity shows strong substitutability between capital and energy, implying that green technology investment should bring a higher degree of energy-saving performance. Unfortunately, however, the market price of carbon emissions is far too low compared with its shadow price, suggesting that the Korean government’s price-oriented market intervention has resulted in the ETS producing poor sustainable performance. As the title suggests, ETS of Korea is not sustainable at the current stage, but with more efforts on the transition period, all the developing countries should support the governance factors of the ETS in terms of the more effective green investment with easier access to the green technology.

  17. DI-(2-ETHYLHEXYL PHTHALATE OXIDATIVE DEGRADATION BY FENTON PROCESS IN SYNTHETIC AND REAL PETROCHEMICAL WASTEWATER

    Directory of Open Access Journals (Sweden)

    R. Esmaeli

    2011-09-01

    Full Text Available Di-(2-Ethylhexyl phthalate (DEHP belongs to the class of phthalate esters and is used as an additive in many products including plastics, paints and inks or as a solvent in industrial formulations. The degradation of DEHP in aqueous solution using oxidative Fenton reaction (H2O2/Fe2+ was carried out in this study. It was found that H2O2 concentration, Fe2+ concentration, and pH were the three main factors that could significantly influence the degradation rates of DEHP. The highest degradation percentage (85.6 % of DEHP was observed within 60 min at pH 3 in H2O2/Fe2+ system. The results of our study suggested that the concentration with 90 mg/L H2O2, 5 mg/L Fe2+, and 20 mg/L DEHP in the solution at pH 3 were the optimal conditions. The optimized reaction parameters were preceded for treatment of real wastewater obtained from a petrochemical plant.

  18. Analysis of Waste Water Treatment in Kaduna Refining and Petrochemicals Corporation (KRPC (NNPC Kaduna Nigeria

    Directory of Open Access Journals (Sweden)

    Dr. (Mrs. Bertha Abdu Danja

    2016-07-01

    Full Text Available Scientific data and results have to be accurate, precise and reliable and are subject to ever increasing scrutiny by regulators in industry, the environment and medicine, in validation and also in research and development. Given our numerous environmental problems, the need for accurate, precise and reliable results cannot be overemphasized in environmental pollution control. This research was undertaken by visiting the analytical laboratory involved in environmental pollution control in Nigerian National Petroleum Corporation (NNPC Kaduna which is known as Kaduna Refining and Petrochemicals (KRPC. Results were taken within a span of three years at different times of the year. End of month results were also taken for the two receiving rivers (River Kaduna & Romi River and effluent from the refinery. The waste water was analyzed using available instruments in the Refinery such as PH meter, Dissolved Oxygen (DO Meter, Conductivity Meter, Gas chromatography, burette, pipette, Double beam Spectrometer, and Thermometer. The results showed that many parameters meet the standard of limit set by the Nigerian Standard Organization but there are many vital parameters whose limits are very low but not measured for lack of instruments. The point of concern here becomes the availability of suitable analytical instruments for quality control in the waste water treatment.

  19. Effects of Shift Work on Cognitive Performance, Sleep Quality, and Sleepiness among Petrochemical Control Room Operators.

    Science.gov (United States)

    Kazemi, Reza; Haidarimoghadam, Rashid; Motamedzadeh, Majid; Golmohamadi, Rostam; Soltanian, Alireza; Zoghipaydar, Mohamad Reza

    2016-02-03

    Shift work is associated with both sleepiness and reduced performance. The aim of this study was to examine cognitive performance, sleepiness, and sleep quality among petrochemical control room shift workers. Sixty shift workers participated in this study. Cognitive performance was evaluated using a number of objective tests, including continuous performance test, n-back test, and simple reaction time test; sleepiness was measured using the subjective Karolinska Sleepiness Scale (KSS); and sleep quality was assessed using the Pittsburgh Sleep Quality Index (PSQI) questionnaire. ANCOVA, t-test, and repeated-measures ANOVA were applied for statistical analyses, and the significance level was set at p sleep quality on both day and night shifts, and there were significant differences between the day and night shifts in terms of subjective sleep quality and quantity (p sleep, induced cognitive performance decline at the end of both day and night shifts, and increased sleepiness in night shift. It, thus, seems necessary to take ergonomic measures such as planning for more appropriate shift work and reducing working hours.

  20. Conversion of carbon dioxide to valuable petrochemicals:An approach to clean development mechanism

    Institute of Scientific and Technical Information of China (English)

    Farnaz Tahriri Zangeneh; Saeed Sahebdelfar; Maryam Takht Ravanchi

    2011-01-01

    The increase of atmospheric carbon dioxide and the global warming due to its greenhouse effect resulted in worldwide concerns. On the other hand, carbon dioxide might be considered as a valuable and renewable carbon source. One approach to reduce carbon dioxide emissions could be its capture and recycle via transformation into chemicals using the technologies in C1 chemistry. Despite its great interest, there are difficulties in CO2 separation on the one hand, and thermodynamic stability of carbon dioxide molecule rendering its chemical activity low on the other hand. Carbon dioxide has been already used in petrochemical industries for production of limited chemicals such as urea.The utilization of carbon dioxide does not necessarily involve development of new processes, and in certain processes such as methanol synthesis and methane steam reforming, addition of CO2 into the feed results in its utilization and increases carbon efficiency. In other cases,modifications in catalyst and/or processes, or even new catalysts and processes, are necessary. In either case, catalysis plays a crucial role in carbon dioxide conversion and effective catalysts are required for commercial realization of the related processes. Technologies for CO2 utilization are emerging after many years of research and development efforts.

  1. Evaluation of soil gas sampling and analysis techniques at a former petrochemical plant site.

    Science.gov (United States)

    Hers, I; Li, L; Hannam, S

    2004-07-01

    Methods for soil gas sampling and analysis are evaluated as part of a research study on soil vapour intrusion into buildings, conducted at a former petro-chemical plant site ("Chatterton site"). The evaluation process was designed to provide information on reliability and selection of appropriate methods for soil gas sampling and analysis, and was based on a literature review of data and methods, and experiments completed as part of the research study. The broader context of this work is that soil gas characterization is increasingly being used for input into risk assessment of contaminated sites, particularly when evaluating the potential intrusion of soil vapour into buildings. There are only a limited number of research studies and protocols addressing soil gas sampling and analysis. There is significant variability in soil gas probe design and sample collection and analysis methods used by practitioners. The experimental studies conducted to evaluate soil gas methods address the permeation or leakage of gases from Tedlar bags, time-dependent sorption of volatile organic compound (VOC)-vapours onto probe surfaces and sampling devices, and analytical and quality control issues for light gas and VOC analyses. Through this work, common techniques for soil gas collection and analysis are described together with implications for data quality arising from the different methods used. Some of the potential pitfalls that can affect soil gas testing are identified, and recommendations and guidance for improved protocols are provided.

  2. Microbial surfactant activities from a petrochemical landfarm in a humid tropical region of Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Maciel, B.M.; Dias, J.C.T.; Santos, A.C.F.; Argolo-Filho, R.C.; Fontana, R.; Loguercio, L.L.; Rezende, R.P. [Univ. Estadual de Santa Cruz, Santa Cruz (Brazil). Dept. de Ciencias Biologicas

    2007-08-15

    Studies have suggested that biosurfactants can enhance the biodegradation of almost insoluble organics by increasing cell uptake availability. In this study, micro-organisms were isolated from a soil sample from a Brazilian petrochemical waste landfarm and grown in petroleum as a carbon source in order to assess their surfactant potential. Isolated colonies were inoculated into tubes, and a drop-collapse method was used to select micro-organisms with surfactant activity. Surfactant activity of the isolates was assessed when the activity was detected for the first time in each culture. The supernatant of each micro-organism was then diluted. The surfactant activity of each dilution was then observed via micelles formation. DNA was then extracted from the samples. A total of 60 microbial strains were selected. Results showed that a variety of petroleum-grown micro-organisms obtained from the landfarm soil showed surfactant activity. Results showed that the micro-organisms were able to use petroleum as a sole carbon source. The production of surfactant compounds occurred during the declining stages of microbial culture curves, which suggested that the nutritional stress achieved on the fourth day of the culture induced the synthesis and secretion of biosurfactants by the isolates. It was concluded that micro-organisms derived from soils polluted with hydrocarbons can be used in bioremediation processes. 21 refs., 1 tab., 3 figs.

  3. Environmental indicators of the combustion of prospective coal water slurry containing petrochemicals.

    Science.gov (United States)

    Dmitrienko, Margarita A; Nyashina, Galina S; Strizhak, Pavel A

    2017-09-15

    Negative environmental impact of coal combustion has been known to humankind for a fairly long time. Sulfur and nitrogen oxides are considered the most dangerous anthropogenic emissions. A possible solution to this problem is replacing coal dust combustion with that of coal water slurry containing petrochemicals (CWSP). Coal processing wastes and used combustible liquids (oils, sludge, resins) are promising in terms of their economic and energy yield characteristics. However, no research has yet been conducted on the environmental indicators of fuels based on CWSP. The present work contains the findings of the research of CO, CO2, NOx, SOx emissions from the combustion of coals and CWSPs produced from coal processing waste (filter cakes). It is demonstrated for the first time that the concentrations of dangerous emissions from the combustion of CWSPs (carbon oxide and dioxide), even when combustible heavy liquid fractions are added, are not worse than those of coal. As for the concentration of sulfur and nitrogen oxides, it is significantly lower for CWSPs combustion as compared to coals. The presented research findings illustrate the prospects of the wide use of CWSPs as a fuel that is cheap and beneficial, in terms of both energy output and ecology, as compared to coal. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Biodiversity of Birds in the Green Urban Area of Petrochemical Industry, Palembang, South Sumatra, Indonesia

    Directory of Open Access Journals (Sweden)

    Yona Selvia Arma Dewita

    2016-08-01

    Full Text Available The study on "The Biodiversity of Birds in the Region of Green Open Space (GOS of The Petrochemical Industry, Palembang, South Sumatra, Indonesia" was conducted from August to September 2014 with the objective to determine the diversity of bird species. The method used to inventory bird species was Indice Ponctuels' Abondance (IPA method. The results of the study revealed that there were at least 19 species of birds included in 14 families, in which four of the bird species were the species protected by the law, namely Halcyonchloris, Haliasturindus, Halcyonsmyrnensis, and Nectariniajugularis. The plant species as the habitat of the birds included Pterocarpus indicus Willd. (16.74%, Polyalthialongifolia Sonn. (14.02%, Cocosnucifera L. (12.98%, Elaeisguineensis Jacq. (7.76% and Mangiferaindica L. (7.71% with the diversity index of 2.96. These data prove that the area of green urban industry can also serve as a habitat for wildlife such as birds provided that the management of the green open space remains the concern of the industry.

  5. Occupational Stress and Mental Health of Employees of a Petrochemical Company before and after Privatization

    Directory of Open Access Journals (Sweden)

    A Mahdad

    2010-03-01

    Full Text Available Background: Many countries make many of their governmental sectors private. This transition, however, may affect their employees in numerous ways.Objective: To determine the level of occupational stress and mental health of employees of a petrochemical company in Isfahan, Central Iran, before and 3 months after privatization.Methods: Out of the 700 employees of the studied company, using a stratified random sampling technique, 140 persons were selected. We used Steinmetz occupational stress and GHQ-28 questionnaires to determine the level of stress and mental health status of participants.Results: The reliability of the questionnaires used was acceptable (Chronbach alpha coefficients: 0.85 and 0.86, respectively. Job stress level was significantly increased 3 months after privatization; the mean±SD job stress score before and after privatization were 22.9±10.43 and 28.3±12.25, respectively (p<0.001. The mean±SD mental health score after privatization (17.57±11.63 was also significantly (p<0.001 higher than that before the privatization (13.8±6.0. There was a significant (p<0.001 positive correlation between the mental health status score and job score (r=0.476.Conclusion: After privatization, the job stress of employees increased significantly. This increase was associated with a decrease in mental health. To lessen the side effects of privatization, the process should be performed cautiously.

  6. Design issues of a reinforcement-based self-learning fuzzy controller for petrochemical process control

    Science.gov (United States)

    Yen, John; Wang, Haojin; Daugherity, Walter C.

    1992-01-01

    Fuzzy logic controllers have some often-cited advantages over conventional techniques such as PID control, including easier implementation, accommodation to natural language, and the ability to cover a wider range of operating conditions. One major obstacle that hinders the broader application of fuzzy logic controllers is the lack of a systematic way to develop and modify their rules; as a result the creation and modification of fuzzy rules often depends on trial and error or pure experimentation. One of the proposed approaches to address this issue is a self-learning fuzzy logic controller (SFLC) that uses reinforcement learning techniques to learn the desirability of states and to adjust the consequent part of its fuzzy control rules accordingly. Due to the different dynamics of the controlled processes, the performance of a self-learning fuzzy controller is highly contingent on its design. The design issue has not received sufficient attention. The issues related to the design of a SFLC for application to a petrochemical process are discussed, and its performance is compared with that of a PID and a self-tuning fuzzy logic controller.

  7. Pattern formation - Instabilities in sand ripples

    DEFF Research Database (Denmark)

    Hansen, J. L.; v. Hecke, M.; Haaning, A.

    2001-01-01

    Sand ripples are seen below shallow wavy water and are formed whenever water oscillates over a bed of sand. Here we analyse the instabilities that can upset this perfect patterning when the ripples are subjected to large changes in driving amplitude or frequency, causing them to deform both...

  8. Pilot Project Sand Groynes Delfland Coast

    NARCIS (Netherlands)

    Hoekstra, R.; Walstra, D.J.R.; Swinkels, C.S.

    2012-01-01

    In October and November 2009 a pilot project has been executed at the Delfland Coast in the Netherlands, constructing three small sandy headlands called Sand Groynes. Sand Groynes are nourished from the shore in seaward direction and anticipated to redistribute in the alongshore due to the impact of

  9. Silica sand resources in the Netherlands

    NARCIS (Netherlands)

    Meulen, M.J. van der; Westerhoff, W.E.; Menkovic, A.; Gruijters, S.H.L.L.; Dubelaar, C.W.; Maljers, D.

    2009-01-01

    Silica sand, (almost) pure quartz sand, is a valuable and scarce mineral resource within the shallow Dutch subsurface. High-grade deposits are exploited in the southeastemmost part of the country, as raw material for the glass, ceramic, chemical and other process industries. Dutch land-use policy re

  10. Pilot Project Sand Groynes Delfland Coast

    NARCIS (Netherlands)

    Hoekstra, R.; Walstra, D.J.R.; Swinkels, C.S.

    2012-01-01

    In October and November 2009 a pilot project has been executed at the Delfland Coast in the Netherlands, constructing three small sandy headlands called Sand Groynes. Sand Groynes are nourished from the shore in seaward direction and anticipated to redistribute in the alongshore due to the impact of

  11. Understanding Colombian Amazonian white sand forests

    NARCIS (Netherlands)

    Peñuela-Mora, M.C.

    2014-01-01

    Although progress has been made in studies on white sand forests in the Amazon, there is still a considerable gap in our knowledge of the unique species composition of white sand forests and their structure and dynamics, especially in Western Amazon. This thesis aims to fill this gap by addressing t

  12. Sand transportation and reverse patterns over leeward face of sand dune

    Science.gov (United States)

    Jiang, Hong; Dun, Hongchao; Tong, Ding; Huang, Ning

    2017-04-01

    Sand saltation has complex interactions with turbulent flow and dune form. Most models of wind-blown sand consider ideal circumstances such as steady wind velocity and a flat surface, and the bulk of data on wind flow and sand transport over an individual dune has focused mostly on the influence of dune shape or inter-dune space on the wind flow, neglecting the effect of morphology on sand saltation, particularly airflow and sand transportation over the leeward slope. Wind flow structures over the leeward slope of sand dunes have a fundamental influence on the organization of sand dunes. In order to understand sand dune dynamics, lee face airflow and sediment transportation should be paid more attention. Previous field observations could not measure turbulent flow structure well because of the limited observation points and the influence of experiment structure on wind field. In addition, the reverse sand particles over leeward face could not be collected by sand trap in field. Numerous field observations could not measure turbulent flow structure because of the limited observation points and the influence of experimental structures on the wind field. In addition, the reverse transport of sand particles over leeward face could not be collected by sand traps in field. Therefore, this paper aims to investigate the turbulent flow structure and sand transport pattern over the leeward slope. A numerical model of sand saltation over slope terrain is constructed, which also considers the coupling effects between air flow and sand particles. The large eddy simulation method is used to model turbulent flow. Sand transport is simulated by tracking the trajectory of each sand particle. The results show that terrain significantly alters the turbulent air flow structure and wind-blown sand movement, especially over the leeward slope. Here, mass flux increases initially and then decreases with height in the reversed flow region in the direction of wind flow, and the mass flux

  13. Choosing an optimum sand control method

    Directory of Open Access Journals (Sweden)

    Ehsan Khamehchi

    2015-06-01

    Full Text Available Formation sand control is always one of the main concerns of production engineers. There are some different methods to prevent sand production. Choosing a method for preventing formation sand production depends on different reservoir parameters and politic and economic conditions. Sometimes, economic and politic conditions are more effective to choose an optimum than reservoir parameters. Often, simultaneous investigation of politic and economic conditions with reservoir parameters has different results with what is expected. So, choosing the best sand control method is the result of thorough study. Global oil price, duration of sand control project and costs of necessary equipment for each method as economic and politic conditions and well productivity index as reservoir parameter are the main parameters studied in this paper.

  14. Altitude of the top of the Sparta Sand and Memphis Sand in three areas of Arkansas

    Science.gov (United States)

    Pugh, Aaron L.; Westerfield, Paul W.; Gonthier, Gerard; Poynter, David T.

    1998-01-01

    The Sparta Sand and Memphis Sand form the second most productive aquifer in Arkansas. The Sparta Sand and Memphis Sand range in thick- ness from 0 to 900 feet, consisting of fine- to medium-grained sands interbedded with layers of silt, clay, shale, and minor amounts of lignite. Within the three areas of interest, the top surface of the Sparta Sand and Memphis Sand dips regionally east and southeast towards the axis of the Mississippi Embayment syncline and Desha Basin. Local variations in the top surface may be attributed to a combination of continued development of structural features, differential compaction, localized faulting, and erosion of the surface prior to subsequent inundation and deposition of younger sediments.

  15. Sand Failure Mechanism and Sanding Parameters in Niger Delta Oil Reservoirs

    Directory of Open Access Journals (Sweden)

    Sunday Isehunwa,

    2010-05-01

    Full Text Available Sand production is a major issue during oil and gas production from unconsolidated reservoirs. In predicting the onset of sand production, it is important to accurately determine the failure mechanism and the contributing parameters. The aim of this study was to determine sand failure mechanism in the Niger-Delta, identify themajor contributing parameters and evaluate their effects on sanding.Completion and production data from 78 strings completed on 22 reservoirs in a Niger Delta oil Field were evaluated. Sand failure mechanisms and contributing parameters were identified and compared with published profiles. The results showed that cohesive stress is the predominant sand failure mechanism. Water cut, bean size and gas oil ratio (GOR impact sand production in the Niger Delta.

  16. Fossilization Processes in Thermal Springs

    Science.gov (United States)

    Farmer, Jack D.; Cady, Sherry; Desmarais, David J.; Chang, Sherwood (Technical Monitor)

    1995-01-01

    To create a comparative framework for the study of ancient examples, we have been carrying out parallel studies of the microbial biosedimentology, taphonomy and geochemistry of modem and sub-Recent thermal spring deposits. One goal of the research is the development of integrated litho- and taphofacies models for siliceous and travertline sinters. Thermal springs are regarded as important environments for the origin and early evolution of life on Earth, and we seek to utilize information from the fossil record to reconstruct the evolution of high temperature ecosystems. Microbial contributions to the fabric of thermal spring sinters occur when population growth rates keep pace with, or exceed rates of inorganic precipitation, allowing for the development of continuous biofilms or mats. In siliceous thermal springs, microorganisms are typically entombed while viable. Modes of preservation reflect the balance between rates of organic matter degradation, silica precipitation and secondary infilling. Subaerial sinters are initially quite porous and permeable and at temperatures higher than about 20 C, organic materials are usually degraded prior to secondary infilling of sinter frameworks. Thus, organically-preserved microfossils are rare and fossil information consists of characteristic biofabrics formed by the encrustation and underplating of microbial mat surfaces. This probably accounts for the typically low total organic carbon values observed in thermal spring deposits. In mid-temperature, (approx. 35 - 59 C) ponds and outflows, the surface morphology of tufted Phormidium mats is preserved through mat underplating by thin siliceous: crusts. Microbial taxes lead to clumping of ceils and/or preferred filament orientations that together define higher order composite fabrics in thermal spring stromatolites (e.g. network, coniform, and palisade). At lower temperatures (less than 35 C), Calothrix mats cover shallow terracette pools forming flat carpets or pustular

  17. Global sand trade is paving the way for a tragedy of the sand commons

    Science.gov (United States)

    Torres, A.; Brandt, J.; Lear, K.; Liu, J.

    2016-12-01

    In the first 40 years of the 21st century, planet Earth is highly likely to experience more urban land expansion than in all of history, an increase in transportation infrastructure by more than a third, and a great variety of land reclamation projects. While scientists are beginning to quantify the deep imprint of human infrastructure on biodiversity at large scales, its off-site impacts and linkages to sand mining and trade have been largely ignored. Sand is the most widely used building material in the world. With an ever-increasing demand for this resource, sand is being extracted at rates that far exceed its replenishment, and is becoming increasingly scarce. This has already led to conflicts around the world and will likely lead to a "tragedy of the sand commons" if sustainable sand mining and trade cannot be achieved. We investigate the environmental and socioeconomic interactions over large distances (telecouplings) of infrastructure development and sand mining and trade across diverse systems through transdisciplinary research and the recently proposed telecoupling framework. Our research is generating a thorough understanding of the telecouplings driven by an increasing demand for sand. In particular, we address three main research questions: 1) Where are the conflicts related to sand mining occurring?; 2) What are the major "sending" and "receiving" systems of sand?; and 3) What are the main components (e.g. causes, effects, agents, etc.) of telecoupled systems involving sand mining and trade? Our results highlight the role of global sand trade as a driver of environmental degradation that threatens the integrity of natural systems and their capacity to deliver key ecosystem services. In addition, infrastructure development and sand mining and trade have important implications for other sustainability challenges such as over-fishing and global warming. This knowledge will help to identify opportunities and tools to better promote a more sustainable use

  18. Mechanics of anisotropic spring networks

    Science.gov (United States)

    Zhang, T.; Schwarz, J. M.; Das, Moumita

    2014-12-01

    We construct and analyze a model for a disordered linear spring network with anisotropy. The modeling is motivated by, for example, granular systems, nematic elastomers, and ultimately cytoskeletal networks exhibiting some underlying anisotropy. The model consists of a triangular lattice with two different bond occupation probabilities, px and py, for the linear springs. We develop an effective medium theory (EMT) to describe the network elasticity as a function of px and py. We find that the onset of rigidity in the EMT agrees with Maxwell constraint counting. We also find beyond linear behavior in the shear and bulk modulus as a function of occupation probability in the rigid phase for small strains, which differs from the isotropic case. We compare our EMT with numerical simulations to find rather good agreement. Finally, we discuss the implications of extending the reach of effective medium theory as well as draw connections with prior work on both anisotropic and isotropic spring networks.

  19. Motor gasoline assessment, Spring 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    The springs of 1996 and 1997 provide an excellent example of contrasting gasoline market dynamics. In spring 1996, tightening crude oil markets pushed up gasoline prices sharply, adding to the normal seasonal gasoline price increases; however, in spring 1997, crude oil markets loosened and crude oil prices fell, bringing gasoline prices down. This pattern was followed throughout the country except in California. As a result of its unique reformulated gasoline, California prices began to vary significantly from the rest of the country in 1996 and continued to exhibit distinct variations in 1997. In addition to the price contrasts between 1996 and 1997, changes occurred in the way in which gasoline markets were supplied. Low stocks, high refinery utilizations, and high imports persisted through 1996 into summer 1997, but these factors seem to have had little impact on gasoline price spreads relative to average spread.

  20. Spring harvest of corn stover

    Energy Technology Data Exchange (ETDEWEB)

    Lizotte, P.L. [Laval Univ., Quebec City, PQ (Canada). Dept. des sols et de genie agroalimentaire; Savoie, P. [Agriculture and Agri-Food Canada, Quebec City, PQ (Canada)

    2010-07-01

    Corn stover is typically left behind in the field after grain harvest. Although part of the stover should remain in the field for soil organic matter renewal and erosion protection, half of the stover could be removed sustainably. This represents about one million t dry matter (DM) of stover per year in the province of Quebec. Stover harvested in the fall is very wet. While there are applications for wet stover, the available markets currently require a dry product. Preliminary measurements have shown that stover left in the field throughout the winter becomes very dry, and a considerable amount would still be harvestable in the spring. In the spring of 2009, corn stover was harvested at 2 sites, each subdivided into 2 parcels. The first parcel was cut and raked in the fall of 2008 (fall parcel), while the second parcel was cut and raked in spring 2009. Fibre from both parcels was baled in the spring 2009. At the first site, a large square baler was used in late April to produce bales measuring 0.8 m x 0.9 m x 1.8 m. On the second site a round baler was used in late May to produce bales of 1.2 m in width by 1.45 m in diameter. On the second site, a small square baler was also used to produce bales of 0.35 m x 0.45 m x 0.60 m (spring cutting only). With the large square baler, an average of 3.9 t DM/ha was harvested equally on the fall parcel and the spring parcel, representing a 48 per cent recovery of biomass based on stover yields.

  1. Yarn Expo Spring Concluded the Spring Fair in Beijing Successfully

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ As the 2009 Yarn Expo Spring, organized by Messe Frankfurt (HK) Ltd, the Sub-Council of Textile Industry - CCPIT, China Cotton Textile Association, China Wool Textile Association, China Chemical Fibers Association, China Bast & Leaf Fiber Textiles Association, and China Textile Information Centre, came to an end on 1 April, the organizers had something to smile about.

  2. Instant Spring for Android starter

    CERN Document Server

    Dahanne, Anthony

    2013-01-01

    Packt Instant Starter: get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks.This is a Starter which gives you an introduction to Spring for Android with plenty of well-explained practical code examples.If you are an Android developer who wants to learn about RESTful web services and OAuth authentication and authorization, and you also want to know how to speed up your development involving those architectures using Spring for Android abstractions, then this book is for you.But core Java developers

  3. SPring-8 twin helical undulator.

    Science.gov (United States)

    Hara, T; Tanaka, T; Tanabe, T; Maréchal, X M; Kumagai, K; Kitamura, H

    1998-05-01

    There are several ways of producing circularly polarized light, such as using asymmetric devices, crossed undulators etc. The SPring-8 helical undulator introduces a simple way of producing both horizontal and vertical fields in one undulator. All the magnet arrays are arranged above and below the plane of the electron orbit, so there is no limitation of access from the sides of the undulator. For the SPring-8 BL25SU, two helical undulators will be installed in tandem, and the helicity of the polarization can be switched at up to 10 Hz using five kicker magnets.

  4. Adsorption of dyes on Sahara desert sand.

    Science.gov (United States)

    Varlikli, Canan; Bekiari, Vlasoula; Kus, Mahmut; Boduroglu, Numan; Oner, Ilker; Lianos, Panagiotis; Lyberatos, Gerasimos; Icli, Siddik

    2009-10-15

    Sahara desert sand (SaDeS) was employed as a mineral sorbent for retaining organic dyes from aqueous solutions. Natural sand has demonstrated a strong affinity for organic dyes but significantly lost its adsorption capacity when it was washed with water. Therefore, characterization of both natural and water washed sand was performed by XRD, BET, SEM and FTIR techniques. It was found that water-soluble kyanite, which is detected in natural sand, is the dominant factor affecting adsorbance of cationic dyes. The sand adsorbs over 75% of cationic dyes but less than 21% for anionic ones. Among the dyes studied, Methylene Blue (MB) demonstrated the strongest affinity for Sahara desert sand (Q(e)=11.98 mg/g, for initial dye solution concentration 3.5 x 10(-5)mol/L). The effects of initial dye concentration, the amount of the adsorbent, the temperature and the pH of the solution on adsorption capacity were tested by using Methylene Blue as model dye. Pseudo-first-order, pseudo-second-order and intraparticle diffusion models were applied. It was concluded that adsorption of Methylene Blue on Sahara desert sand followed pseudo-second order kinetics. Gibbs free energy, enthalpy change and entropy change were calculated and found -6411 J/mol, -30360 J/mol and -76.58 J/mol K, respectively. These values indicate that the adsorption is an exothermic process and has a spontaneous nature at low temperatures.

  5. Critical state of sand matrix soils.

    Science.gov (United States)

    Marto, Aminaton; Tan, Choy Soon; Makhtar, Ahmad Mahir; Kung Leong, Tiong

    2014-01-01

    The Critical State Soil Mechanic (CSSM) is a globally recognised framework while the critical states for sand and clay are both well established. Nevertheless, the development of the critical state of sand matrix soils is lacking. This paper discusses the development of critical state lines and corresponding critical state parameters for the investigated material, sand matrix soils using sand-kaolin mixtures. The output of this paper can be used as an interpretation framework for the research on liquefaction susceptibility of sand matrix soils in the future. The strain controlled triaxial test apparatus was used to provide the monotonic loading onto the reconstituted soil specimens. All tested soils were subjected to isotropic consolidation and sheared under undrained condition until critical state was ascertain. Based on the results of 32 test specimens, the critical state lines for eight different sand matrix soils were developed together with the corresponding values of critical state parameters, M, λ, and Γ. The range of the value of M, λ, and Γ is 0.803-0.998, 0.144-0.248, and 1.727-2.279, respectively. These values are comparable to the critical state parameters of river sand and kaolin clay. However, the relationship between fines percentages and these critical state parameters is too scattered to be correlated.

  6. Sand Flies and Their Control Methods.

    Science.gov (United States)

    Çetin, Hüseyin; Özbel, Yusuf

    2017-06-01

    The main aim of managing arthropod vectors that carry the disease agents is interrupting the infection cycle. Therefore, the management of the disease implies that all precautions related to all elements (i.e., human, arthropod vector, and reservoir) in the infection cycle need to be taken. There are important points that need to be considered while dealing with sand flies (Diptera: Psychodidae: Phlebotominae), which in many regions worldwide, particularly in tropical and subtropical areas, are vectors of diseases such as leishmaniasis and sand fly fever and are the arthropods of the infection cycle. Because the larval control of the sand flies is very difficult and almost impossible, the management is mainly conducted for the adults. The most effective strategy for reducing both sand fly fever and leishmaniasis is managing sand flies, particularly in areas where humans are located. In this review, the morphology, biology, and taxonomy of sand flies; the integrated fighting and management methods such as insecticide-impregnated bed nets and use of curtains, zooprophylaxis, indoor and outdoor residual applications, larvicides, repellents, and insecticide-impregnated dog collars; and data regarding many issues such as insecticide resistance in sand flies have been emphasized on in the review.

  7. Critical State of Sand Matrix Soils

    Directory of Open Access Journals (Sweden)

    Aminaton Marto

    2014-01-01

    Full Text Available The Critical State Soil Mechanic (CSSM is a globally recognised framework while the critical states for sand and clay are both well established. Nevertheless, the development of the critical state of sand matrix soils is lacking. This paper discusses the development of critical state lines and corresponding critical state parameters for the investigated material, sand matrix soils using sand-kaolin mixtures. The output of this paper can be used as an interpretation framework for the research on liquefaction susceptibility of sand matrix soils in the future. The strain controlled triaxial test apparatus was used to provide the monotonic loading onto the reconstituted soil specimens. All tested soils were subjected to isotropic consolidation and sheared under undrained condition until critical state was ascertain. Based on the results of 32 test specimens, the critical state lines for eight different sand matrix soils were developed together with the corresponding values of critical state parameters, M, λ, and Γ. The range of the value of M, λ, and Γ is 0.803–0.998, 0.144–0.248, and 1.727–2.279, respectively. These values are comparable to the critical state parameters of river sand and kaolin clay. However, the relationship between fines percentages and these critical state parameters is too scattered to be correlated.

  8. Invasive plants on disturbed Korean sand dunes

    Science.gov (United States)

    Kim, Kee Dae

    2005-01-01

    The sand dunes in coastal regions of South Korea are important ecosystems because of their small size, the rare species found in this habitat, and the beautiful landscapes they create. This study investigated the current vegetative status of sand dunes on three representative coasts of the Korean peninsula, and on the coasts of Cheju Island, and assessed the conditions caused by invasive plants. The relationships between the degree of invasion and 14 environmental variables were studied. Plots of sand dunes along line transects perpendicular to the coastal lines were established to estimate vegetative species coverage. TWINSPAN (Two-Way Indicator Species Analysis), CCA (Canonical Correspondence Analysis), and DCCA (Detrended Canonical Correspondence Analysis) were performed to classify communities on sand dunes and assess species composition variation. Carex kobomugi, Elymus mollis, and Vitex rotundifolia were found to be the dominant species plotted on the east, the west, and the peripheral coasts of Cheju Island, respectively. Vegetation on the south coast was totally extinct. The 19 communities, including representative C. kobomugi, C. kobomugi- Ixeris repens, C. kobomugi- Oenothera biennis, E. mollis, Lolium multiflorum- Calystegia soldanella, and V. rotundifolia- C. kobomugi, were all classified according to TWINSPAN. Oenothera biennis and L. multiflorum were exotics observed within these native communities. CCA showed that invasive native and exotic species distribution was segregated significantly, according to disturbance level, exotic species number, gravel, sand and silt contents, as well as vegetation size. It further revealed that human disturbance can strongly favor the settlement of invasive and exotic species. Restoration options to reduce exotic plants in the South Korean sand dune areas were found to be the introduction of native plant species from one sand dune into other sand dune areas, prohibition of building and the introduction of exotic

  9. Formation mechanism of cracks in saturated sand

    Institute of Scientific and Technical Information of China (English)

    Xiaobing Lu; Zhemin Zheng; Yongren Wu

    2006-01-01

    The formation mechanism of "water film" (or crack) in saturated sand is analyzed theoretically and numerically.The theoretical analysis shows that there will be no stable "water film" in the saturated sand if the strength of the skeleton is zero and no positions are choked.It is shown by numerical simulation that stable water films initiate and grow if the choking state keeps unchanged once the fluid velocities decrease to zero in the liquefied sand column.The developments of "water film" based on the model presented in this paper are compared with experimental results.

  10. Lund Sand No 0:part 2

    OpenAIRE

    Ibsen, Lars Bo; Jakobsen, Finn Rosendal

    1996-01-01

    During the last 15 years the Geotechnical Engineering Group (GEG) at Aalborg University has performed triaxial tests with a sand called Lund No 0. Lund No 0 is a graded sand from a gravel pit near Horsens in Denmark. For the classification of the sand the following tests have been performed: Sieve test, Grain density, ds, Maximum, emax, and minimum, emin, void ratio. The strength parameters of Lund No 0 are detennined by some drained and undrained triaxial tests in the Danish Triaxial Cell. T...

  11. Lund Sand No 0:part 1

    OpenAIRE

    Ibsen, Lars Bo; Jakobsen, Finn Rosendal

    1996-01-01

    During the last 15 years the Geotechnical Engineering Group (GEG) at Aalborg University has performed triaxial tests with a sand called Lund No 0. Lund No 0 is a graded sand from a gravel pit near Horsens in Denmark. For the classification of the sand the following tests have been performed: Sieve test, Grain density, ds, Maximum, emax, and minimum, emin, void ratio. The strength parameters of Lund No 0 are detennined by some drained and undrained triaxial tests in the Danish Triaxial Cell. T...

  12. Biodegradable materials as foundry moulding sands binders

    Directory of Open Access Journals (Sweden)

    K. Major - Gabryś

    2015-07-01

    Full Text Available The aim of this article is to show the possibility of using biodegradable materials as part of the composition of foundry moulding and core sand binders. Research shows that moulding sands with biodegradable materials selected as binders are not only less toxic but are also better suited to mechanical reclamation than moulding sands with phenol-furfuryl resin. The use of biodegradable materials as additives to typical synthetic resins can result in their decreased toxicity and improved ability to reclamation as well as in accelerated biodegradation of binding material leftovers of mechanical reclamation.

  13. Strategies for the development of Quebec`s petrochemical industry: education and environment

    Energy Technology Data Exchange (ETDEWEB)

    O`Connor, J.A. [Canadian Chemical Producer`s Association (Canada)

    1992-12-31

    One of the key challenges not only for the Quebec but for the Canadian petrochemical industry will be the challenge to increase the number of students pursuing science or engineering as fields of study. According to this author, there is a crisis in science and technology education in Canada. The ability of Canadian students to compete with their peers around the world is steadily diminishing as a result of the undue emphasis on student attitudes and self-esteem in Canadian schools, as opposed to European and Asian schools which focus on conveying specific skills. He advocates a shift in attitude away from simply more money spent on education towards concern with what and how well students are learning. It was suggested that the educational system must take into account the demands of the market place in fashioning the curricula. If students are to function in the real world where performance is evaluated, the educational system will have to change to reflect the fact that the market and society reward people in proportion to their contribution. The relationship between environmental concern and education was also explored, and the inclusion of environmental issues in the classroom curriculum was recommended. As a topic for curricula, the environment is subject to broad-ranging and often conflicting views regarding its problems and their causes, effects and remedies. Nevertheless, it is not a transient issue to be dismissed as a fad. Rather, it is an issue here to stay, hence it should play a more formalized role at all levels of the curriculum from primary schools to colleges and universities.

  14. Physicochemical and thermal characteristics of the sludge produced after thermochemical treatment of petrochemical wastewater.

    Science.gov (United States)

    Verma, Shilpi; Prasad, Basheshwar; Mishra, I M

    2012-01-01

    The present work describes the physicochemical and thermal characteristics of the sludge generated after thermochemical treatment of wastewater from a petrochemical plant manufacturing purified terephthalic acid (PTA). Although FeCl3 was found to be more effective than CuSO4 in removing COD from wastewater, the settling and filtration characteristics of FeCl3 sludge were poorer. Addition of cationic polyacrylamide (CPAA; 0.050kg/m3) to the FeCl3 wastewater system greatly improved the values of the filter characteristics of specific cake resistance (1.2 x 10(8) m/kg) and resistance of filter medium (9.9 x 10(8) m(-1)) from the earlier values of 1.9 x 10(9) m/kg and 1.7 x 10(8) m(-1), respectively. SEM-EDAX and FTIR studies were undertaken, to understand the sludge structure and composition, respectively. The moisture distribution in the CuSO4 sludge, FeCl3 sludge and FeCl3 + CPAA sludge showed that the amount of bound water content in the CuSO4 and FeCl3 + CPAA sludges is less than that of the FeCl3 sludge and there was a significant reduction in the solid-water bond strength of FeCl3 + CPAA sludge, which was responsible for better settling and filtration characteristics. Due to the hazardous nature of the sludge, land application is not a possible route of disposal. The thermal degradation behaviour of the sludge was studied for its possible use as a co-fuel. The studies showed that degradation behaviour of the sludge was exothermic in nature. Because of the exothermic nature of the sludge, it can be used in making fuel briquettes or it can be disposed of via wet air oxidation.

  15. On-line, real-time monitoring for petrochemical and pipeline process control applications

    Energy Technology Data Exchange (ETDEWEB)

    Kane, Russell D.; Eden, D.C.; Cayard, M.S.; Eden, D.A.; Mclean, D.T. [InterCorr International, Inc., 14503 Bammel N. Houston, Suite 300, Houston Texas 77014 (United States); Kintz, J. [BASF Corporation, 602 Copper Rd., Freeport, Texas 77541 (United States)

    2004-07-01

    Corrosion problems in petroleum and petrochemical plants and pipeline may be inherent to the processes, but costly and damaging equipment losses are not. With the continual drive to increase productivity, while protecting both product quality, safety and the environment, corrosion must become a variable that can be continuously monitored and assessed. This millennium has seen the introduction of new 'real-time', online measurement technologies and vast improvements in methods of electronic data handling. The 'replace when it fails' approach is receding into a distant memory; facilities management today is embracing new technology, and rapidly appreciating the value it has to offer. It has offered the capabilities to increase system run time between major inspections, reduce the time and expense associated with turnaround or in-line inspections, and reduce major upsets which cause unplanned shut downs. The end result is the ability to know on a practical basis of how 'hard' facilities can be pushed before excessive corrosion damage will result, so that process engineers can understand the impact of their process control actions and implement true asset management. This paper makes reference to use of a online, real-time electrochemical corrosion monitoring system - SmartCET 1- in a plant running a mostly organic process media. It also highlights other pertinent examples where similar systems have been used to provide useful real-time information to detect system upsets, which would not have been possible otherwise. This monitoring/process control approach has operators and engineers to see, for the first time, changes in corrosion behavior caused by specific variations in process parameters. Process adjustments have been identified that reduce corrosion rates while maintaining acceptable yields and quality. The monitoring system has provided a new window into the chemistry of the process, helping chemical engineers improve their process

  16. Safety culture assessment in petrochemical industry: a comparative study of two algerian plants.

    Science.gov (United States)

    Boughaba, Assia; Hassane, Chabane; Roukia, Ouddai

    2014-06-01

    To elucidate the relationship between safety culture maturity and safety performance of a particular company. To identify the factors that contribute to a safety culture, a survey questionnaire was created based mainly on the studies of Fernández-Muñiz et al. The survey was randomly distributed to 1000 employees of two oil companies and realized a rate of valid answer of 51%. Minitab 16 software was used and diverse tests, including the descriptive statistical analysis, factor analysis, reliability analysis, mean analysis, and correlation, were used for the analysis of data. Ten factors were extracted using the analysis of factor to represent safety culture and safety performance. The results of this study showed that the managers' commitment, training, incentives, communication, and employee involvement are the priority domains on which it is necessary to stress the effort of improvement, where they had all the descriptive average values lower than 3.0 at the level of Company B. Furthermore, the results also showed that the safety culture influences the safety performance of the company. Therefore, Company A with a good safety culture (the descriptive average values more than 4.0), is more successful than Company B in terms of accident rates. The comparison between the two petrochemical plants of the group Sonatrach confirms these results in which Company A, the managers of which are English and Norwegian, distinguishes itself by the maturity of their safety culture has significantly higher evaluations than the company B, who is constituted of Algerian staff, in terms of safety management practices and safety performance.

  17. Watching Faults Grow in Sand

    Science.gov (United States)

    Cooke, M. L.

    2015-12-01

    Accretionary sandbox experiments provide a rich environment for investigating the processes of fault development. These experiments engage students because 1) they enable direct observation of fault growth, which is impossible in the crust (type 1 physical model), 2) they are not only representational but can also be manipulated (type 2 physical model), 3) they can be used to test hypotheses (type 3 physical model) and 4) they resemble experiments performed by structural geology researchers around the world. The structural geology courses at UMass Amherst utilize a series of accretionary sandboxes experiments where students first watch a video of an experiment and then perform a group experiment. The experiments motivate discussions of what conditions they would change and what outcomes they would expect from these changes; hypothesis development. These discussions inevitably lead to calculations of the scaling relationships between model and crustal fault growth and provide insight into the crustal processes represented within the dry sand. Sketching of the experiments has been shown to be a very effective assessment method as the students reveal which features they are analyzing. Another approach used at UMass is to set up a forensic experiment. The experiment is set up with spatially varying basal friction before the meeting and students must figure out what the basal conditions are through the experiment. This experiment leads to discussions of equilibrium and force balance within the accretionary wedge. Displacement fields can be captured throughout the experiment using inexpensive digital image correlation techniques to foster quantitative analysis of the experiments.

  18. Finding Spring on Planet X

    Science.gov (United States)

    Simoson, Andrew J.

    2007-01-01

    For a given orbital period and eccentricity, we determine the maximum time lapse between the winter solstice and the spring equinox on a planet. In addition, given an axial precession path, we determine the effects on the seasons. This material can be used at various levels to illustrate ideas such as periodicity, eccentricity, polar coordinates,…

  19. Sources of antibiotics: Hot springs.

    Science.gov (United States)

    Mahajan, Girish B; Balachandran, Lakshmi

    2017-06-15

    The discovery of antibiotics heralded an era of improved health care. However, the over-prescription and misuse of antibiotics resulted in the development of resistant strains of various pathogens. Since then, there has been an incessant search for discovering novel compounds from bacteria at various locations with extreme conditions. The soil is one of the most explored locations for bioprospecting. In recent times, hypersaline environments and symbiotic associations have been investigated for novel antimicrobial compounds. Among the extreme environments, hot springs are comparatively less explored. Many researchers have reported the presence of microbial life and secretion of antimicrobial compounds by microorganisms in hot springs. A pioneering research in the corresponding author's laboratory resulted in the identification of the antibiotic Fusaricidin B isolated from a hot spring derived eubacteria, Paenibacillus polymyxa, which has been assigned a new application for its anti-tubercular properties. The corresponding author has also reported anti-MRSA and anti-VRE activity of 73 bacterial isolates from hot springs in India. Copyright © 2016 Elsevier Inc. All rights reserved.

  20. Finding Spring on Planet X

    Science.gov (United States)

    Simoson, Andrew J.

    2007-01-01

    For a given orbital period and eccentricity, we determine the maximum time lapse between the winter solstice and the spring equinox on a planet. In addition, given an axial precession path, we determine the effects on the seasons. This material can be used at various levels to illustrate ideas such as periodicity, eccentricity, polar coordinates,…

  1. NOVA Spring 2000 Teacher's Guide.

    Science.gov (United States)

    Colombo, Luann; Gregoire, Tanya; Ransick, Kristina; Sammons, Fran Lyons; Sammons, James

    This teacher's guide complements six programs that aired on the Public Broadcasting System (PBS) in the spring of 2000. Programs include: (1) "Lost on Everest"; (2) "Lost Tribes of Israel"; (3) "Crocodiles"; (4) "Lost at Sea: The Search for Longitude"; (5) "Global Warming"; and (6) "Secrets of…

  2. Spring for It: First Novels

    Science.gov (United States)

    Hoffert, Barbara

    2010-01-01

    How do publishers describe the first novels they will be releasing this spring and summer? "Amazing," "fabulous," and "unique" are words that pop up frequently, though hats off to one publicist forthright or cheeky enough to call a work "weird Western/horror." The proof of such praise is in the reading, but why not check out this preview of first…

  3. Spring for It: First Novels

    Science.gov (United States)

    Hoffert, Barbara

    2010-01-01

    How do publishers describe the first novels they will be releasing this spring and summer? "Amazing," "fabulous," and "unique" are words that pop up frequently, though hats off to one publicist forthright or cheeky enough to call a work "weird Western/horror." The proof of such praise is in the reading, but why not check out this preview of first…

  4. Effect of Chromite-Silica Sands Characteristics on Performance of Ladle Filler Sands for Continuous Casting

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Free opening rate is mainly determined by the performance of the ladle filler sand. High free opening rates of ladles are required in steel making to improve steel quality. Chromite ladle filler sands are one of the most widely used ladle filler sand. Several operative variables and materials characteristics affect the performance of the sands. Three sets of chromite ladle filler sands were selected and researches were focused on the sintering hehaviour and per- formance of the sands under operative conditions. The effect of particle size distribution on sintering, microstruc- ture, flowability, and permeability were presented. In all cases, the particle size varies from 0.1 to 1.5 mm corre- sponding to free flowing powders. One of the samples has higher permeability factor in comparison with others due to low particle size distribution. The other sample presents very good free opening due to its very good flowability and permeability factor.

  5. Advanced treatment of refractory organic pollutants in petrochemical industrial wastewater by bioactive enhanced ponds and wetland system.

    Science.gov (United States)

    Liu, Shuo; Ma, Qiusha; Wang, Baozhen; Wang, Jifu; Zhang, Ying

    2014-05-01

    A large-scale combined ponds-wetland system was applied for advanced treatment of refractory pollutants in petrochemical industrial wastewater. The system was designed to enhance bioactivity and biological diversity, which consisted of anaerobic ponds (APs), facultative ponds (FPs), aerobic pond and wetland. The refractory pollutants in the petrochemical wastewater to be treated were identified as alkanes, chloroalkanes, aromatic hydrocarbons, and olefins, which were significantly degraded and transformed along with the influent flowing through the enhanced bioactive ponds-wetland system. 8 years of recent operational data revealed that the average removal rate of stable chemical oxygen demand (COD) was 42.7 % and that influent COD varied from 92.3 to 195.6 mg/L. Final effluent COD could reach 65.8 mg/L (average). COD removal rates were high in the APs and FPs and accounted for 75 % of the total amount removed. This result indicated that the APs and FPs degraded refractory pollutants through the facilitation of bacteria growth. The changes in the community structures of major microbes were assessed by 16SrDNA-denaturing gradient gel electrophoresis. The same analysis was used to identify the main bacterial function for the removal of refractory pollutants in the APs and FPs. The APs and FPs displayed similar microbial diversities, and some of the identified bacteria degraded and removed refractory pollutants. The overall results proved the applicability, stability, and high efficiency of the ponds-wetland system with enhanced bioactivity in the advanced removal of refractory pollutants from petrochemical industrial wastewater.

  6. Assessing vanadium and arsenic exposure of people living near a petrochemical complex with two-stage dispersion models

    Energy Technology Data Exchange (ETDEWEB)

    Chio, Chia-Pin; Yuan, Tzu-Hsuen [Institute of Occupational Medicine and Industrial Hygiene, College of Public Health, National Taiwan University, Taipei, Taiwan (China); Shie, Ruei-Hao [Institute of Occupational Medicine and Industrial Hygiene, College of Public Health, National Taiwan University, Taipei, Taiwan (China); Green Energy and Environment Research Laboratories, Industrial Technology Research Institute, Hsinchu, Taiwan (China); Chan, Chang-Chuan, E-mail: ccchan@ntu.edu.tw [Institute of Occupational Medicine and Industrial Hygiene, College of Public Health, National Taiwan University, Taipei, Taiwan (China)

    2014-04-01

    Highlights: • Two-stage dispersion models can estimate exposures to hazardous air pollutants. • Spatial distribution of V levels is derived for sources without known emission rates. • A distance-to-source gradient is found for V levels from a petrochemical complex. • Two-stage dispersion is useful for modeling air pollution in resource-limited areas. - Abstract: The goal of this study is to demonstrate that it is possible to construct a two-stage dispersion model empirically for the purpose of estimating air pollution levels in the vicinity of petrochemical plants. We studied oil refineries and coal-fired power plants in the No. 6 Naphtha Cracking Complex, an area of 2,603-ha situated on the central west coast of Taiwan. The pollutants targeted were vanadium (V) from oil refineries and arsenic (As) from coal-fired power plants. We applied a backward fitting method to determine emission rates of V and As, with 192 PM{sub 10} filters originally collected between 2009 and 2012. Our first-stage model estimated emission rates of V and As (median and 95% confidence intervals at 0.0202 (0.0040–0.1063) and 0.1368 (0.0398–0.4782) g/s, respectively. In our second stage model, the predicted zone-average concentrations showed a strong correlation with V, but a poor correlation with As. Our findings show that two-stage dispersion models are relatively precise for estimating V levels at residents’ addresses near the petrochemical complex, but they did not work as well for As levels. In conclusion, our model-based approach can be widely used for modeling exposure to air pollution from industrial areas in countries with limited resources.

  7. Assessment of regional influence from a petrochemical complex by modeling and fingerprint analysis of volatile organic compounds (VOCs)

    Science.gov (United States)

    Su, Yuan-Chang; Chen, Sheng-Po; Tong, Yu-Huei; Fan, Chen-Lun; Chen, Wei-Hao; Wang, Jia-Lin; Chang, Julius S.

    2016-09-01

    This study aimed to demonstrate a strategy to investigate the influence of volatile organic compounds (VOCs) on its neighboring districts from a gigantic petrochemical complex. Monitoring of the VOCs in the region was achieved by a nine-station network, dubbed photochemical assessment measurement stations (PAMS), which produced speciated mixing ratios of 54 non-methane hydrocarbons (NMHCs) to represent VOCs with an hourly resolution within a 20 km radius. One-year (2013/10/1-2014/9/30) worth of PAMS data from the network were used in forms of total NMHCs (called PAMS-TNMHC) and speciated mixing ratios. Three dimensional modeling coupled with PAMS measurements successfully elucidated how the study domain was affected by the petrochemical complex and distant sources under three typical seasonal wind patterns: northeast monsoonal, southwest monsoonal, and local-circulation. More exquisite analysis of influence on the neighboring districts was permitted with the use of speciated mixing ratios of VOCs provided by the PAMS network. The ratios of ethylene/acetylene (E/A) > 3 and propylene/acetylene (P/A) > 1.5 were used as indicators to reveal the PAMS sites affected by the petrochemical emissions. Consequently, the hourly speciated data from the nine PAMS sites enabled a finer assessment of the districts affected by the complex to calculate the percent time of influence (dubbed TI%) for all the sites (districts). It was found that the region was more affected by the complex under both the northeast monsoonal and the local-circulation wind types with some of the PAMS sites greater than 5% for the TI%. By contrast, influence on the region was found minimal under the southwest monsoonal flow with the TI% small than 1.5% across all sites. This study successfully devised a method of assessment with the use of speciated measurements of selected VOCs and modeling to assess the influence of a prominent source on the neighboring districts by filtering out irrelevant sources under

  8. Sensitivity of growth characteristics of tidal sand ridges and long bed waves to formulations of bed shear stress, sand transport and tidal forcing: A numerical model study

    Science.gov (United States)

    Yuan, Bing; de Swart, Huib E.; Panadès, Carles

    2016-09-01

    Tidal sand ridges and long bed waves are large-scale bedforms that are observed on continental shelves. They differ in their wavelength and in their orientation with respect to the principal direction of tidal currents. Previous studies indicate that tidal sand ridges appear in areas where tidal currents are above 0.5 m s-1, while long bed waves occur in regions where the maximum tidal current velocity is slightly above the critical velocity for sand erosion and the current is elliptical. An idealized nonlinear numerical model was developed to improve the understanding of the initial formation of these bedforms. The model governs the feedbacks between tidally forced depth-averaged currents and the sandy bed on the outer shelf. The effects of different formulations of bed shear stress and sand transport, tidal ellipticity and different tidal constituents on the characteristics of these bedforms (growth rate, wavelength, orientation of the preferred bedforms) during their initial formation were examined systematically. The results show that the formulations for bed shear stress and slope-induced sand transport are not critical for the initial formation of these bedforms. For tidal sand ridges, under rectilinear tidal currents, increasing the critical bed shear stress for sand erosion decreases the growth rate and the wavelength of the preferred bedforms significantly, while the orientation angle slightly decreases. The dependence of the growth rate, wavelength and the orientation of the preferred bedforms on the tidal ellipticity is non-monotonic. A decrease in tidal frequency results in preferred bedforms with larger wavelength and smaller orientation angle, while their growth rate hardly changes. In the case of joint diurnal and semidiurnal tides, or spring-neap tides, the characteristics of the bedforms are determined by the dominant tidal constituent. For long bed waves, the number of anticyclonically/cyclonically oriented bedforms with respect to the principal

  9. Bioaugmentation of flow-through sand filters

    DEFF Research Database (Denmark)

    Samuelsen, Elin Djurhuus

    Global applications of pesticides in agricultural production have led to the detection of trace amounts of pesticides in groundwater resources in levels exceeding the EU threshold limit for drinking water of 0.1 µg L-1. Pesticide-polluted groundwater may be remediated by inoculating waterworks sand...... for degradation performances in flow-through sand columns, with the aim of identifying a suitable inoculant strain for future environmental applications. Another aim was to identify a suitable genetic marker to monitor phenoxy acid degradation in strain Sphingobium sp. PM2. We were not able to link motility...... and biofilm formation to the strains´ ability to adhere to sand. Nevertheless, a correlation was found between cell surface hydrophobicity and adhesion and overall degradation performances in flow-through sand columns. We identified S phingobium sp. PM2 as a promising inoculant strain, displaying efficient...

  10. Petrophysical Analysis of Oil Sand in Athabasca

    Science.gov (United States)

    cheong, S.; Lee, H.

    2013-12-01

    Oil sands are the major unconventional energy sources which have great reserves in Alberta, Canada. Recovery techniques such as CSS (Cyclic Steam Stimulation) and SAGD (Steam Assisted Gravity Drainage) enabled to develop deeper bitumen about several hundred meter depth. Before applying CSS and SAGD, reservoir heterogeneity of mud barriers or shale breccias should be clarified to establish injection and production wells successfully. We conducted the integrated petro-physical analysis for oil sands deposits in Athabasca by correlating well logs with seismic data. From 33 well logs and 3D seismic, we have made P-wave impedance by recursive inversion. Target formations of our analysis were the top of Wabiskaw member. Using inverted impedance and multi-attributes, porosity volume was derived at a target depth. Porosity of time slice 375 ms ranged 20 ~ 40 % stretching porous sand body from NE to SW direction. Characteristics of porosity distribution may be useful to design optimum oil sands recovery in Athabasca.

  11. Carbon cycle: New pathways in the sand

    Science.gov (United States)

    Rao, Alexandra

    2017-01-01

    Organic carbon decomposition in anoxic marine sediments was thought to be dominated by bacteria, but experimental data and microbial culture studies now show that microalgae buried in coastal sands may also play an important role in carbon turnover.

  12. A review of the main factors influencing the FT-IR-PLS abilities exemplified with petrochemical qualimetric applications.

    Science.gov (United States)

    Andrade, J M; Garcia, M V; Lopez-Mahia, P; Prada, D

    1997-12-01

    Quality control usually involves monitoring several variables directly related with industrial necessities using univariate tests. One powerful alternative is to link multivariate analytical techniques and multivariate chemometrics. In this way, Fourier Transform Infrared spectroscopy and Partial Least Squares regression are used to discuss and review several advantages and drawbacks encountered in using such combination in industrial facilities. Typical drawbacks are selection of data pretreatment, errors in reference methods, selection of calibration and validation sets and model-aging. This review is exemplified with petrochemical applications although other fields are also considered (mainly when dealing with data pretreatment).

  13. System for alarms analysis and optimization in petrochemicals plants; Sistema para analise e otimizacao de alarmes em plantas petroquimicas

    Energy Technology Data Exchange (ETDEWEB)

    Leitao, Gustavo; Pifer, Aderson; Guedes, Luiz Affonso [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil); Saito, Kaku; Aquino, Leonardo [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

    2008-07-01

    The present work presents a group of algorithms, techniques and functionalities on alarms management which can be used efficiently on the treatment of 'disturbances' caused by the informal management of the alarm systems. Among the disturbances handled by these techniques, there is the recognition of intermittent alarms and false alarms, location of alarm floods and correlation between alarms, aiming the identification of communal root causes. The results will be presented through a case study on petrochemical alarm plants. At last, the results obtained by the utilization of such functionalities will be presented and discussed. (author)

  14. Non-methane hydrocarbons (NMHCs) and their contribution to ozone formation potential in a petrochemical industrialized city, Northwest China

    Science.gov (United States)

    Jia, Chenhui; Mao, Xiaoxuan; Huang, Tao; Liang, Xiaoxue; Wang, Yanan; Shen, Yanjie; Jiang, Wanyanhan; Wang, Huiqin; Bai, Zhilin; Ma, Minquan; Yu, Zhousuo; Ma, Jianmin; Gao, Hong

    2016-03-01

    Hourly air concentrations of fifty-three non-methane hydrocarbons (NMHCs) were measured at downtown and suburb of Lanzhou, a petrochemical industrialized city, Northwest China in 2013. The measured data were used to investigate the seasonal characteristics of NMHCs air pollution and their contributions to the ozone formation in Lanzhou. Annually averaged NMHCs concentration was 38.29 ppbv in downtown Lanzhou. Among 53 NMHCs, alkanes, alkenes, and aromatics accounted for 57%, 23% and 20% of the total NMHCs air concentration, respectively. The atmospheric levels of toluene and propane with mean values of 4.62 and 4.56 ppbv were higher than other NMHCs, respectively. The ambient levels of NMHCs in downtown Lanzhou were compared with measured NMHCs data collected at a suburban site of Lanzhou, located near a large-scale petrochemical industry. Results show that the levels of alkanes, alkenes, and aromatics in downtown Lanzhou were lower by factors of 3-11 than that in west suburb of the city. O3-isopleth plots show that ozone was formed in VOCs control area in downtown Lanzhou and NOx control area at the west suburban site during the summertime. Propylene-equivalent (Prop-Equiv) concentration and the maximum incremental reactivity (MIR) in downtown Lanzhou indicate that cis-2-butene, propylene, and m/p-xylene were the first three compounds contributing to ozone formation potentials whereas in the petrochemical industrialized west suburb, ethane, propene, and trans-2-Butene played more important role in the summertime ozone formation. Principal component analysis (PCA) and multiple linear regression (MLR) were further applied to identify the dominant emission sources and examine their fractions in total NMHCs. Results suggest that vehicle emission, solvent usage, and industrial activities were major sources of NMHCs in the city, accounting for 58.34%, 22.19%, and 19.47% of the total monitored NMHCs in downtown Lanzhou, respectively. In the west suburb of the city

  15. CRADE OF SAND AND DUST STORM WEATHER

    Institute of Scientific and Technical Information of China (English)

    Niu Ruoyun; Tian Cuiying; Bi Baogui; Yang Keming; Wang Youheng; Tuo Ya; Ding Haifang; Zhang Tairen

    2011-01-01

    Background Sand and dust storm,as one of the main disastrous weathers that affect northern China,not only affect the people health and normal life,but cause the short-term climatic changes due to the direct and indirect radiation of the earth-atmosphere system through the dust floating in the sky.The sand end dust weather and its potential harm on the national economy,ecological environment,social activities and other aspects have aroused worldwide concern.

  16. Laboratory evaluation of selected tar sand asphalts

    Energy Technology Data Exchange (ETDEWEB)

    Button, J.W.; Epps, J.A.; Gallaway, B.M.

    1980-12-01

    Three tar sand asphalts of similar grades prepared from one syncrude by three different refining methods were characterized by tests commonly used to specify paving asphalts together with certain special tests. Asphalt-aggregate mixtures were prepared using these asphalts and tested in the laboratory to determine strength stiffness stability, tensile properties, temperature effects and water susceptibility. Comparison of the tar sand asphalt properties to conventional petroleum asphalt properties reveal no striking differences.

  17. Response to Oil Sands Products Assessment

    Science.gov (United States)

    2015-09-01

    Tailings ponds are an operating facility common to all types of surface mining. For oil sands, tailings consisting of water , sand, clay, and residual ...oil, are pumped to these basins—or ponds— where settling occurs and water is recycled for reuse in the process. When the ponds are no longer required...of crude oil transported by tank vessel in Washington waters . In a 2013 Bloomburg Business news article , Dan Murtaugh states, “The dock probably

  18. Treating tar sands formations with dolomite

    Energy Technology Data Exchange (ETDEWEB)

    Vinegar, Harold J.; Karanikas, John Michael

    2010-06-08

    Methods for treating a tar sands formation are described herein. The tar sands formation may include dolomite and hydrocarbons. Methods may include providing heat at less than the decomposition temperature of dolomite from one or more heaters to at least a portion of the formation. At least some of the hydrocarbon fluids are mobilized in the formation. At least some of the hydrocarbon fluids may be produced from the formation.

  19. Perceptions of Private Sector towards the Pollutant Release and Transfer Register: A Case Study on Petrochemical Industry in the Map Ta Phut Industrial Estate, Rayong, Thailand

    Directory of Open Access Journals (Sweden)

    Marie Kondo

    2013-01-01

    Full Text Available Under the Rio Declaration and Agenda 21 from the United Nations Conference on Environment and Development in 1992 as well as other international agreements, Thailand is currently in the process of adopting the Pollutant Release and Transfer Register (PRTR through a pilot project in Rayong province with assistance from the Japan International Cooperation Agency (JICA. This research aimed to study perceptions of private sector towards the PRTR through a case study on petrochemical industry in the Map Ta Phut Industrial Estate. Through semi-structured questionnaires and in-depth interviews, the study found that the petrochemical industry viewed that benefits of the PRTR for the government and civil society is quite clear, while each petrochemical company has different understanding on such benefit for private sector to be as sustainable industrial management. Various incentive measures and concerns on the PRTR were also indicated in this study.

  20. Pragmatics of reclaimed sand quality assessment recovered nowadays from various used sand systems

    Directory of Open Access Journals (Sweden)

    J. Dańko

    2010-04-01

    Full Text Available The assessment of the reclamation degree of used sands is not a simple, clearly defined issue. The great variety of technologies ofmoulding and core sands, based on the organic and inorganic binders does not allow the use of a single, universal index assessing thedegree of reclamation. The article presents the problems of research relating to selection of proper criteria for assessing the degree ofreclamation process of used moulding and core sands deriving from different technologies. The most often applied in practice types ofused sands and the most adequate in practice methods of assessing the degrees of their reclamation were characterized.

  1. Sand Dune Encroachment and Desertification Processes of the Rigboland Sand Sea, Central Iran.

    Science.gov (United States)

    Ahmady-Birgani, Hesam; McQueen, Kenneth G; Moeinaddini, Mazaher; Naseri, Hamidreza

    2017-05-08

    Early studies on sand dune movement and desertification in Iran have not always been convincingly demonstrated because of problems with the field-based measurements. In some areas where various land uses have been engulfed by aeolian sand dunes, desertification is clear, but in other less settled areas, it may not be so obvious. The objective of this study is to demonstrate encroachments of the Rigboland sand sea, central Iran, in its different directions and variable magnitude rates. Determining the rate and direction of the sand sea movements is critical for specifying which lands should be prioritized and quickly protected. The study has trialed a change detection technique which uses a Cross-Tabulation module to compare two available LandsatTM images over the Rigboland sand sea. This indicates that within a ten-year span (from 1988 to 1998) more than 200 ha/yr were added to the Rigboland sand sea, from the alluvial fan landforms in the eastern upstream, outer margins of the Rigboland sand sea. Coupled with GIS techniques, this type of analysis of the remote sensing (RS) images provides an effective tool for the monitoring and prognostication of sand dune movement and sand sea change.

  2. Analysis of sand particles' lift-off and incident velocities in wind-blown sand flux

    Institute of Scientific and Technical Information of China (English)

    Tian-Li Bo; Xiao-Jing Zheng; Shao-Zhen Duan; Yi-Rui Liang

    2013-01-01

    In the research of windblown sand movement,the lift-off and incident velocities of saltating sand particles play a significant role in bridging the spatial and temporal scales from single sand particle's motion to windblown sand flux.In this paper,we achieved wind tunnel measurements of the movement of sand particles near sand bed through improving the wind tunnel experimental scheme of paticle image velocimetry (PIV) and data processing method.And then the influence of observation height on the probability distributions of lift-off and incident velocities of sand particles was analyzed.The results demonstrate that the observation height has no obvious influence on the distribution pattern of the lift-off and incident velocities of sand particles,i.e.,the probability distribution of horizontal and vertical velocities of lift-off and incident sand particles follow a Gaussian distribution and a negative exponential distribution,respectively.However,it influences the center of the Gaussian distribution,the decay constant and the amplitude of the negative exponential distribution.

  3. Road dust from pavement wear and traction sanding

    Energy Technology Data Exchange (ETDEWEB)

    Kupiainen, K.

    2007-07-01

    Vehicles affect the concentrations of ambient airborne particles through exhaust emissions, but particles are also formed in the mechanical processes in the tire-road interface, brakes, and engine. Particles deposited on or in the vicinity of the road may be re-entrained, or resuspended, into air through vehicle-induced turbulence and shearing stress of the tires. A commonly used term for these particles is 'road dust'. The processes affecting road dust emissions are complex and currently not well known. Road dust has been acknowledged as a dominant source of PM10 especially during spring in the sub-arctic urban areas, e.g. in Scandinavia, Finland, North America and Japan. The high proportion of road dust in sub-arctic regions of the world has been linked to the snowy winter conditions that make it necessary to use traction control methods. Traction control methods include dispersion of traction sand, melting of ice with brine solutions, and equipping the tires with either metal studs (studded winter tires), snow chains, or special tire design (friction tires). Several of these methods enhance the formation of mineral particles from pavement wear and/or from traction sand that accumulate in the road environment during winter. When snow and ice melt and surfaces dry out, traffic-induced turbulence makes some of the particles airborne. A general aim of this study was to study processes and factors underlying and affecting the formation and emissions of road dust from paved road surfaces. Special emphasis was placed on studying particle formation and sources during tire road interaction, especially when different applications of traction control, namely traction sanding and/or winter tires were in use. Respirable particles with aerodynamic diameter below 10 micrometers (PM10) have been the main concern, but other size ranges and particle size distributions were also studied. The following specific research questions were addressed: (i) How do traction

  4. Recent Sand Avalanching on Rabe Crater Dunes

    Science.gov (United States)

    2000-01-01

    Dark streaks on the steep, down-wind slopes of sand dunes in Rabe Crater are seen at several locations in this Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image. These streaks indicate relatively recent (i.e., in the past few years or less) movement of sand down these slopes.Sand dunes move forward by the combined action of wind that drives sand up the shallow slope on the windward side of the dune (in this case, the slopes that face toward the lower right) and the avalanching of this sand down the steeper, lee-side slope. The steep slope is also known as the slip face. The dark streaks indicated by arrows are evidence for sand avalanches that occurred within a few months or years of the time when the picture was taken in March 1999. Other streaks which are seen criss-crossing the dunes may be the result of passing dust devils. This image is illuminated from the upper left and located in Rabe Crater of the Hellespontus-Noachis region near 44.2oS, 325.6oW.

  5. Discrete particle simulation of mixed sand transport

    Institute of Scientific and Technical Information of China (English)

    Fengjun Xiao; Liejin Guo; Debiao Li; Yueshe Wang

    2012-01-01

    An Eulerian/Lagrangian numerical simulation is performed on mixed sand transport.Volume averaged Navier-Stokes equations are solved to calculate gas motion,and particle motion is calculated using Newton's equation,involving a hard sphere model to describe particle-to-particle and particle-to-wall collisions.The influence of wall characteristics,size distribution of sand particles and boundary layer depth on vertical distribution of sand mass flux and particle mean horizontal velocity is analyzed,suggesting that all these three factors affect sand transport at different levels.In all cases,for small size groups,sand mass flux first increases with height and then decreases while for large size groups,it decreases exponentially with height and for middle size groups the behavior is in-between.The mean horizontal velocity for all size groups well fits experimental data,that is,increasing logarithmically with height in the middle height region.Wall characteristics greatly affects particle to wall collision and makes the flat bed similar to a Gobi surface and the rough bed similar to a sandy surface.Particle size distribution largely affects the sand mass flux and the highest heights they can reach especially for larger particles.

  6. Predicting the occurrence of sand banks in the North Sea

    NARCIS (Netherlands)

    Veen, van der Henriët H.; Hulscher, Suzanne J.M.H.

    2009-01-01

    Sand banks have a wavelength between 1 and 10 km, and they are up to several tens of meters high. Also, sand banks may have an impact on large-scale human activities that take place in the North Sea like sand mining, shipping, offshore wind farms, etc. Therefore, it is important to know where sand b

  7. Layers, Landslides, and Sand Dunes

    Science.gov (United States)

    2003-01-01

    [figure removed for brevity, see original site] Released 27 October 2003This image shows the northern rim of one of the Valles Marineris canyons. Careful inspection shows many interesting features here. Note that the spurs and gullies in the canyon wall disappear some distance below the top of the canyon wall, indicating the presence of some smooth material here that weathers differently from the underlying rocks. On the floor of the canyon, there are remains from a landslide that came hurtling down the canyon wall between two spurs. Riding over the topography of the canyon floor are many large sand dunes, migrating generally from the lower right to upper left.Image information: VIS instrument. Latitude -14.1, Longitude 306.7 East (53.3 West). 19 meter/pixel resolution.Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  8. Portrait of a Geothermal Spring, Hunter's Hot Springs, Oregon.

    Science.gov (United States)

    Castenholz, Richard W

    2015-01-27

    Although alkaline Hunter's Hot Springs in southeastern Oregon has been studied extensively for over 40 years, most of these studies and the subsequent publications were before the advent of molecular methods. However, there are many field observations and laboratory experiments that reveal the major aspects of the phototrophic species composition within various physical and chemical gradients of these springs. Relatively constant temperature boundaries demark the upper boundary of the unicellular cyanobacterium, Synechococcus at 73-74 °C (the world-wide upper limit for photosynthesis), and 68-70 °C the upper limit for Chloroflexus. The upper limit for the cover of the filamentous cyanobacterium, Geitlerinema (Oscillatoria) is at 54-55 °C, and the in situ lower limit at 47-48 °C for all three of these phototrophs due to the upper temperature limit for the grazing ostracod, Thermopsis. The in situ upper limit for the cyanobacteria Pleurocapsa and Calothrix is at ~47-48 °C, which are more grazer-resistant and grazer dependent. All of these demarcations are easily visible in the field. In addition, there is a biosulfide production in some sections of the springs that have a large impact on the microbiology. Most of the temperature and chemical limits have been explained by field and laboratory experiments.

  9. Development of the Gran Desierto sand sea, northwestern Mexico

    Science.gov (United States)

    Blount, Grady; Lancaster, Nicholas

    1990-08-01

    Three major eolian sand populations can be recognized in the Gran Desierto sand sea of northwestern Mexico by using spectral data from the Landsat thematic mapper in conjunction with textural and mineralogical studies of surface sands. Each sand population has distinct textural, mineralogic, and spectral properties that can be related to sand-dune morphology and position with reference to source areas and transport paths of the sands. The oldest eolian sediment in the sand sea was derived from the early to middle Pleistocene Colorado River that flowed through the area of the western Gran Desierto. Subsequent inputs of eolian sands came from the area of the present Colorado River valley and the coast south of the sand sea. The spatial and temporal pattern of eolian deposition in the region has been controlled by Quaternary tectonic and climatic changes, resulting in the episodic input and deposition of sand.

  10. Fish Springs NWR Water Use Report : 2010

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report contains locations and water use at Fish Springs National Wildlife Refuge (NWR) for 2010. A general background is presented on historical spring water...

  11. Detection and reduction of diffuse liquid and gas emissions in chemical and petrochemical industries; Ermittlung und Verminderung diffuser fluessiger und gasfoermiger Emissionen in der chemischen und petrochemischen Industrie

    Energy Technology Data Exchange (ETDEWEB)

    Koeppke, K.E. [Witten-Herdecke Univ. gGmbH, Witten (Germany). Inst. fuer Umwelttechnik und Management; Cuhls, C. [Halle-Wittenberg Univ., Halle (Germany). Inst. fuer Umwelttechnik

    2002-09-01

    In order to improve environmental protection, VOC emissions from diffuse sources are of growing importance. For the first time in Germany the present research report gives a detailed presentation of: constructive measures for the avoidance and reduction of diffuse emissions, adequate assembling procedures for equipments and installations, technical possibilities of leak detection and, different methods for the estimation of total emissions from chemical and petrochemical production plants. On the basis of own investigations and monitoring measures taken at various plants of chemical and petrochemical industries different measuring techniques for leak detection as well as methods for the estimation of total emissions from diffuse sources are analysed and their limits are described. (orig.)

  12. Used solid catalysts from chemical and petrochemical industries; Les catalyseurs solides uses de l`industrie chimique et du raffinage petrolier

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    A comprehensive survey of the solid catalysts used in the chemical and petrochemical industries is presented; information on solid catalyst market demand prospective for 1998, the nature of solid catalysts used in the various industrial sectors and for the various chemical products production, the european catalysts manufacturers, solid catalyst poisons and inhibitors according to the various types of chemical reactions, mean compositions of used solid catalysts, an assessment of the volume of used solid catalysts generated by chemical and petrochemical industries, the various ways of solid catalyst regeneration and disposal, the potential for off-site regeneration of used catalysts, and French and European regulations, is presented

  13. Spatial distribution of radioisotopes in the coast of Suez Gulf, southwestern Sinai and the impact of hot springs.

    Science.gov (United States)

    Ramadan, Kh A; Seddeek, M K; Elnimr, T; Sharshar, T; Badran, H M

    2011-06-01

    This work describes the concentrations of radioisotopes in soil, sediment, wild plants and groundwater in southwestern Sinai. The study area extends from Suez to Abu Rudies along the eastern part of the Suez Gulf. It included two hot springs: Ayun Musa and Hammam Faraoun. No dependence of ¹³⁷Cs concentrations on any of the measured sand characteristics was found, including calcium carbonate. The enrichment of ²²⁶Ra in Hammam Faraoun hot spring was the most prominent feature. The ²²⁶Ra concentration in hot springs of Ayun Musa and Hammam Faraoun were 68 and 2377 Bq kg⁻¹ for sediments, 3.5 and 54.0 Bq kg⁻¹ for wild plants and 205 and 1945 mBq l⁻¹ for the groundwater, respectively. In addition, ²²⁶Ra activity concentration in local sand in the area of Hammam Faraoun was ∼14 times that of Ayun Musa. On the other hand, the ²³²Th concentrations were comparable in the two hot springs, while ¹³⁷Cs concentrations were relatively higher in Ayun Musa. The characteristics and radioelements studies support possible suggestions that the waters in the two hot springs have different contributions of sea and groundwaters crossing different geological layers where the water-rock interaction takes place.

  14. Imaging Near-Surface Controls on Hot Spring Expression Using Shallow Seismic Refraction in Yellowstone National Park

    Science.gov (United States)

    Price, A. N.; Lindsey, C.; Fairley, J. P., Jr.; Larson, P. B.

    2015-12-01

    We used shallow seismic refraction to image near-surface materials in the vicinity of a small group of hot springs, located in the Morning Mist Springs area of Lower Geyser Basin, Yellowstone National Park, Wyoming. Seismic velocities in the area surveyed range from a low of 0.3 km/s to a high of approximately 2.5 km/s. The survey results indicate an irregular surface topography overlain by silty sediments. The observed seismic velocities are consistent with a subsurface model in which sorted sands and gravels, probably outwash materials from the Pinedale glaciation, are overlain by silts and fine sands deposited in the flat-lying areas of the Morning Springs area. These findings are supported by published geologic maps of the area and well logs from a nearby borehole. The near-surface materials appear to be saturated with discharging hydrothermal fluids of varying temperature, and interbedded with semi-lithified geothermal deposits (sinter). We hypothesize that the relatively low-conductivity deposits of fines at the surface may serve to confine a shallow, relatively low-temperature (sub-boiling) hydrothermal aquifer, and that the distribution of sinter in the shallow subsurface plays an important role in determining the geometry of hydrothermal discharge (hot springs) at the land surface. Few studies of the shallow controls on hot spring expression exist for the Yellowstone caldera, and the present study therefore offers a unique glimpse into near-subsurface fluid flow controls.

  15. Effects of advanced oxidation on green sand properties via iron casting into green sand molds.

    Science.gov (United States)

    Wang, Yujue; Cannon, Fred S; Voigt, Robert C; Komarneni, Sridhar; Furness, J C

    2006-05-01

    The effects of advanced oxidation (AO) processing on the properties of green sand were studied via pouring cast iron into green sand molds. Upon cooling, the green sand molds were autopsied at various distances from the metal-sand interface. Autopsy green sand samples collected from a mold that incorporated AO water were characterized and compared to controlled samples collected from a similar autopsied mold made with conventional tap water (TAP). It was found that the AO processing removed a coating of coal pyrolysis products from the clay surface that typically accumulated on the clay surface. As a result, the AO-conditioned green sand retained 10-15% more active clay as measured bythe standard ultrasonic methylene blue titration than did the TAP-conditioned green sand. The AO processing also nearly doubled the generation of activated carbon from the normalized amount of coal composition of the green sand during the casting process. The AO-enhanced activated carbon generation and the AO-incurred clay surface cleaning provided the AO-conditioned green sand with higher normalized pore volume, and thus higher normalized m-xylene adsorption capacity, i.e., relative to before-metal-pouring conditions. Furthermore, mathematical analysis indicated that the AO-conditioned green sand better retained its important properties after pouring than did the TAP-conditioned green sand. Effectively, this meant after metal pouring, the AO-conditioned sample offered about the same net properties as the TAP-conditioned sample, even though the AO-conditioned sample contained less clay and coal before metal pouring. These results conformed to the full-scale foundry empirical finding that when AO is used, foundries need less makeup clay and coal addition through each casting cycle, and they release less air emissions.

  16. Contribution of laser altimetry images to the geomorphology of the Late Holocene inland drift sands of the European Sand Belt

    NARCIS (Netherlands)

    Jungerius, P.D.; Riksen, M.J.P.M.

    2010-01-01

    The paper explores the possibilities of applying the analysis of laser altimetry images to Dutch drift sands. All along the European Sand Belt, which stretches from Great Britain to the Ural Mountains, Late Glacial cover sands, river dunes and other ice-age deposits were reactivated as drift sand du

  17. Contribution of laser altimetry images to the geomorphology of the Late Holocene inland drift sands of the European Sand Belt

    NARCIS (Netherlands)

    Jungerius, P.D.; Riksen, M.J.P.M.

    2010-01-01

    The paper explores the possibilities of applying the analysis of laser altimetry images to Dutch drift sands. All along the European Sand Belt, which stretches from Great Britain to the Ural Mountains, Late Glacial cover sands, river dunes and other ice–age deposits were reactivated as drift sand du

  18. Contribution of laser altimetry images to the geomorphology of the Late Holocene inland drift sands of the European Sand Belt

    NARCIS (Netherlands)

    Jungerius, P.D.; Riksen, M.J.P.M.

    2010-01-01

    The paper explores the possibilities of applying the analysis of laser altimetry images to Dutch drift sands. All along the European Sand Belt, which stretches from Great Britain to the Ural Mountains, Late Glacial cover sands, river dunes and other ice–age deposits were reactivated as drift sand

  19. Cotransport of microorganisms and metallic colloids in quartz sand or iron oxide-coated sand under real site hydrogeological conditions

    Science.gov (United States)

    Yu, Tong; Wen, Yujuan; Yang, Xinyao; Yang, Yuesuo

    2017-04-01

    The need for studying the fate and transport of engineered and naturally-occurring nanoparticles is of great concern in the past decade. Wudalianchi scenic spot as a famous International Geological Park has the biggest cold spring in China, which is also one of the three biggest cold spring in the world, with a history of over 200 years using in drinking and medical purpose. Thousands of tourists all over the world travelling here each year to enjoy the high quality mineral water and take a bath in the cold spring and "mud-bath" with special medication purposes. Recreation activities gave rise to the engineered nanomaterials (ENMs) releasing into the water environment and increase the risk of contamination. Therefore, it is necessary to evaluate the effect of ENMs-exposure in natural environment and how it influences the transport of microorganisms of Wudalianchi in/without the presence of natural colloids (humic acid) under a series of ion strength. A thorough critical literature review of both work in the study site and the bio/nano-particle transport in porous media was a kick-off of the study. With support of the site investigations and sampling of groundwater, surface water and surface mud/soils, further numerical modelling of the hydrogeochemical speciation of the groundwater was carried out, indicating comprehensive water-rock interactions of this particular region. Metallic nanoparticles (MNPs), including metals, metal oxides and other metal-containing nanoparticles, are produced and ubiquitously applied to medical, cosmetic, photonics and catalysis industries, etc. TiO2, a widely used raw material for cosmetic industries (e.g., sunscreens), was used in this study to represent MNPs. The microorganisms used in this study were extracted from the soil in Wudalianchi. Humic acid (HA), a key component of dissolved organic matter (DOM) chosen as the natural colloids in this study, are ubiquitous and significant constituents in soils and water environment that

  20. Top 5 Spring Festival Customs in China

    Institute of Scientific and Technical Information of China (English)

    梁小明

    2016-01-01

    The Spring Festival is the largest and most important festival in China.It is the first day of the lunar calendar~1 and usually occurs somewhere between January30 and February 20,heralding~2 the beginning of spring,thus it is known as the Spring Festival.1.Spring Couplets On the Chinese New Year,families in China decorate their front doors with poetic couplets

  1. An Evaluation of Chinese Spring Festival

    Institute of Scientific and Technical Information of China (English)

    李艳蕊

    2012-01-01

    Nowadays,many Chinese people felt that Spring Festival is bored;feeling of celebrating Spring Festival is not as strong as before.Some experts stated that the physical part of Spring Festival shrouded the cultural celebrations.This article analysis the phenomenon through comparing how Chinese people had Spring Festivals in the past and now,and comparing different economic status Chinese people have in these two periods.

  2. [Liver function of workers occupationally exposed to mixed organic solvents in a petrochemical industry].

    Science.gov (United States)

    Fernández-D'Pool, J; Oroño-Osorio, A

    2001-06-01

    A descriptive and cross sectional study was conducted to determine whether hepatic function changes in workers occupationally exposed to a mixture of organic solvents, were due to the exposure or confusing factors. A non random sample of 77 workers, operators and supervisors of the Olefin Plant I and II of a petrochemical industry in Maracaibo, Venezuela, was used. Their mean age was 29 +/- 7 years, and had at least one year of exposure to the solvents. This sample was compared with a group of employees of the administrative offices or control panel workers, with a mean age of 36 +/- 8 year and with similar anthropometric characteristics. Workers with a known history of liver disease, blood transfusions and diabetes mellitus were excluded of the study. In addition to a complete occupational disease medical history and a physical examination, serum samples were obtained to determine the activity of the aspartato aminotransferase (AST), alanin aminotransferase (ALT), gamma glutamiltransferase (GGT), alkaline phosphatase (AF), the concentration of the total bile acids (BAS), the surface antigen of hepatitis B(HbsAg) and the hepatitis A virus antibodies: AntiHAV-IgG and the AntiHAV-IgM. An urine sample was taken and analyzed by standard methodology to determine urinary phenols. The air concentrations of benzene, ethylbenzene, toluene and xylene were analyzed by gas chromathography. The serum activities of the liver enzymes, the concentration of bile acids and urinary phenols were not influenced by the exposure to the solvents. The increase of the activity of GGT was associated with obesity and alcohol consumption. The antibodies of the surface antigen of hepatitis A-IgM were normal in both groups and the antibodies for the antigen of hepatitis A-IgG presented a prevalence of 6% in the exposed group and 9% in the non exposed not being associated with liver abnormalities. The individual air concentrations of the solvents were below the environmentally permissible

  3. Challenges and Development Opportunities for Catalytic Technologies in Petrochemical Industry in the 21st Century

    Institute of Scientific and Technical Information of China (English)

    CHEN Qing-ling

    2004-01-01

    The propellent drive and development opportunities for future catalytic technologies in petrochemical industry in the 21st century are reviewed in this paper. It focuses on the following five aspects:(1) The environmentally-friendly catalytic technologies, such as new technologies for the production of organic chemicals changing the raw material and synthetic process, the chemicals production replacing phosgene and hydrogen cyanide toxicant, and the conversion and utilization of organic wastes etc.(2) Utilization and development of cheaper light alkanes, for example, the chemical use of natural gas and the development technologies of methane chain, the production of acetic acid, ethylene and vinyl chloride from selective oxidation of ethane, as well as the manufacture of acrolein and acrylonitrile from the oxidation and ammoxidation of propane.(3) The new propylene-plus technologies of the low value higher olefins, such as catalytic cracking of C4,C5 olefins and metathesis of C4 olefin.(4) The technologies of high selective oxidation, e.g. production of propylene oxide with TS-1 molecular sieve, oxidation process by lattice oxygen and direct oxidation of benzene to phenol etc.(5) Development and application of novel catalytic materials, especially, mesopore molecular sieve materials for a larger molecule reaction, zeolite catalyst with MWW structure for alkylation of benzene and propylene, ionic liquid, and membrane reactor catalyst etc.Meanwhile,the challenging research subjects for future industrial catalysis and the several viewpoints for development strategy of new catalytic technologies are proposed. These viewpoints are as follows:(1) Catalysis discipline must be integrated with many other disciplines and should be multidisciplinary and transdisciplinary.(2) New preparation methods of catalytic materials must be originally developed.(3) The instrumentation having better time resolution and spatial resolution and applying under reaction conditions must be

  4. Qatar and the Arab Spring

    KAUST Repository

    Coates Ulrichsen, Kristian

    2014-11-15

    This chapter examines how Qatar assumed an extraordinarily visible and interventionist role during the Arab Spring upheaval in 2011. It argues that, after an initial period of caution in January 2011, Qatari officials quickly recognised the changing contours of the Arab Spring and pragmatically readjusted their policy-responses. The lack of domestic constraints on decision-making enabled officials, led by the Emir and the Prime minister, to reposition Qatar (somewhat improbably) as a champion of the popular uprisings in North Africa and later as a key external player in the Syrian Civil War. The chapter also provides historical context to Qatar’s close relationship with the Muslim Brotherhood, and documents why Qatari officials saw the outbreak of the uprisings as far more of an opportunity than a challenge.

  5. KUNMING: The City of Spring

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ Kunming is the political, economic and cultural center of Yunnan province and the most popular center for tourism in Southwest China. Kunming enjoys a pleasant climate and does its best to live up to its title of "the City of Spring". Whenever you are planning to go, the temperature is always pleasant. With its convenient transport links in and out of the city, Kunming welcomes tens of thousands of tourists every day.

  6. The Arab Spring in Jordan

    OpenAIRE

    Eriksson, Elsa Annaklara; Hansen, Ditte Ingemann

    2013-01-01

    This project contains analysis and discussion of several social movements in Jordan. The uprising in Jordan and demands for more democratization are inspired by the Arab Spring observed in the Middle East. The most highlighted Jordanian social movements being the religious Muslim Brotherhood, the radical Salafi Movement and the newly proclaimed Popular Mobilization. Questions concerning the identification of them, their goals and ways of mobilizing and the hindrances for these movements to mo...

  7. Spring Framework 5: Themes & Trends

    CERN Document Server

    CERN. Geneva

    2017-01-01

    Spring Framework 5.0/5.1, scheduled for release in early/late 2017, focuses on several key themes: reactive web applications based on Reactive Streams, comprehensive support for JDK 9 and HTTP/2, as well as the latest API generations in the Enterprise Java ecosystem. This talk presents the overall story in the context of wider industry trends, highlighting Spring’s unique programming model strategy.

  8. Controlling proteins through molecular springs.

    Science.gov (United States)

    Zocchi, Giovanni

    2009-01-01

    We argue that the mechanical control of proteins-the notion of controlling chemical reactions and processes by mechanics-is conceptually interesting. We give a brief review of the main accomplishments so far, leading to our present approach of using DNA molecular springs to exert controlled stresses on proteins. Our focus is on the physical principles that underlie both artificial mechanochemical devices and natural mechanisms of allostery.

  9. Strategic Studies Quarterly- Spring 2016

    Science.gov (United States)

    2016-01-01

    Khyber Pakhtunkhwa, bordering Afghanistan. A number of analysts agree that if conflict breaks out with India, Pakistan would immediately rede - ploy...the military should not risk its capacity to fight just to become an instrument of social progress but at the same rook pride in ending the...the " social experiments" conducted during his tenure are not yet known. The former Secretary STRATEGIC STUDIES QuARTERLY + SPRING 2016 [ 149] Book

  10. Volatile organic compounds (VOCs) emission characteristics and control strategies for a petrochemical industrial area in middle Taiwan.

    Science.gov (United States)

    Yen, Chia-Hsien; Horng, Jao-Jia

    2009-11-01

    This study investigated VOC emissions from the largest petrochemical industrial district in Taiwan and recommended some control measures to reduce VOC emissions. In addition to the petrochemical industry, the district encompasses a chemical and fiber industry, a plastics industry and a harbor, which together produce more than 95% of the VOC emissions in the area. The sequence of VOC emission was as follows: components (e.g., valves, flanges, and pumps) (47%) > tanks (29%) > stacks (15%) > wastewater treatment facility (6%) > loading (2%) > flares (1%). Other plants producing high-density polyethylene (HDPE), styrene, ethylene glycol (EG), gas oil, and iso-nonyl-alchol (INA) were measured to determine the VOC leaching in the district. The VOC emissions of these 35 plants (90% of all plants) were less than 100 tons/year. About 74% of the tanks were fixed-roof tanks that leached more VOCs than the other types of tanks. To reduce leaching, the components should be checked periodically, and companies should be required to follow the Taiwan EPA regulations. A VOC emission management system was developed in state implementation plans (SIPs) to inspect and reduce emissions in the industrial district.

  11. Bioremediation of Petrochemical Wastewater Containing BTEX Compounds by a New Immobilized Bacterium Comamonas sp. JB in Magnetic Gellan Gum.

    Science.gov (United States)

    Jiang, Bei; Zhou, Zunchun; Dong, Ying; Wang, Bai; Jiang, Jingwei; Guan, Xiaoyan; Gao, Shan; Yang, Aifu; Chen, Zhong; Sun, Hongjuan

    2015-05-01

    In this study, we investigated the bioremediation of petrochemical wastewater containing BTEX compounds by immobilized Comamonas sp. JB cells. Three kinds of magnetic nanoparticles were evaluated as immobilization supports for strain JB. After comparison with Fe3O4 and a-Fe2O3 nanoparticles, r-Fe2O3 nanoparticle was selected as the optimal immobilization support. The highest biodegradation activity of r-Fe2O3-magnetically immobilized cells was obtained when the concentration of r-Fe2O3 nanoparticle was 120 mg L(-1). Additionally, the recycling experiments demonstrated that the degradation activity of r-Fe2O3-magnetically immobilized cells was still high and led to less toxicity than untreated wastewater during the eight recycles. qPCR suggested the concentration of strain JB in r-Fe2O3-magnetically immobilized cells was evidently increased after eight cycles of degradation experiments. These results supported developing efficient biocatalysts using r-Fe2O3-magnetically immobilized cells and provided a promising technique for improving biocatalysts used in the bioremediation of not only petrochemical wastewater but also other hazardous wastewater.

  12. Effect of rhamnolipid on the aerobic removal of polyaromatic hydrocarbons (PAHs) and COD components from petrochemical wastewater.

    Science.gov (United States)

    Sponza, Delia Teresa; Gök, Oğuzhan

    2010-02-01

    The removal efficiencies of 15 PAHs and some COD components (inert, readily degradable, slowly degradable and metabolic products) from a wastewater taken from a petrochemical industry treatment plant (Izmir, Turkey) have been determined using an aerobic completely stirred tank reactor (CSTR). Addition of rhamnolipid surfactant (15 mg l(-1)) increased the removal efficiencies of PAHs and soluble COD from 72% and 90% to 80% and 99%, respectively. The rhamnolipid treatment caused a significant increase of 5- and 6-ring PAH degradation. The soluble COD removal efficiency was 93%, in CSTR reactors with rhamnolipid added. The inert COD removal efficiency was 60% in a CSTR reactor containing rhamnolipid. Batch tests showed that removal arising from the adsorption of the PAHs was low (between 1.88% and 4.84%) while the removal of PAHs from the petrochemical industry wastewater via volatilization varied between 0.69% and 5.92%. Low sorption capacity (K(p)) values for refinery activated sludge (approximately 2.98 l g(-1)) confirmed that bio-sorption was not an important mechanism controlling the fate of PAHs in aerobic CSTR reactors. Models proposed to simulate the PAH removal indicated that 94% of the PAHs were removed via biodegradation.

  13. Assessing vanadium and arsenic exposure of people living near a petrochemical complex with two-stage dispersion models.

    Science.gov (United States)

    Chio, Chia-Pin; Yuan, Tzu-Hsuen; Shie, Ruei-Hao; Chan, Chang-Chuan

    2014-04-30

    The goal of this study is to demonstrate that it is possible to construct a two-stage dispersion model empirically for the purpose of estimating air pollution levels in the vicinity of petrochemical plants. We studied oil refineries and coal-fired power plants in the No. 6 Naphtha Cracking Complex, an area of 2,603-ha situated on the central west coast of Taiwan. The pollutants targeted were vanadium (V) from oil refineries and arsenic (As) from coal-fired power plants. We applied a backward fitting method to determine emission rates of V and As, with 192 PM10 filters originally collected between 2009 and 2012. Our first-stage model estimated emission rates of V and As (median and 95% confidence intervals at 0.0202 (0.0040-0.1063) and 0.1368 (0.0398-0.4782) g/s, respectively. In our second stage model, the predicted zone-average concentrations showed a strong correlation with V, but a poor correlation with As. Our findings show that two-stage dispersion models are relatively precise for estimating V levels at residents' addresses near the petrochemical complex, but they did not work as well for As levels. In conclusion, our model-based approach can be widely used for modeling exposure to air pollution from industrial areas in countries with limited resources. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. Airborne trace elements near a petrochemical industrial complex in Thailand assessed by the lichen Parmotrema tinctorum (Despr. ex Nyl.) Hale.

    Science.gov (United States)

    Boonpeng, Chaiwat; Polyiam, Wetchasart; Sriviboon, Chutima; Sangiamdee, Duangkamon; Watthana, Santi; Nimis, Pier Luigi; Boonpragob, Kansri

    2017-05-01

    Several trace elements discharged by the petrochemical industry are toxic to humans and the ecosystem. In this study, we assessed airborne trace elements in the vicinity of the Map Ta Phut petrochemical industrial complex in Thailand by transplanting the lichen Parmotrema tinctorum to eight industrial, two rural, and one clean air sites between October 2013 and June 2014. After 242 days, the concentrations of As, Cd, Co, Cr, Cu, Hg, Mo, Ni, Pb, Sb, Ti, V, and Zn in lichens at most industrial sites were higher than those at the rural and the control sites; in particular, As, Cu, Mo, Sb, V, and Zn were significantly higher than at the control site (p industrial sites. Principal component analysis (PCA) showed that most elements were associated with industry, with lesser contributions from traffic and agriculture. Based on the pollution load indexes (PLIs), two industrial sites were highly polluted, five were moderately polluted, and one had a low pollution level, whereas the pollution load at the rural sites was comparable to background levels. This study reinforces the utility of lichens as cost-effective biomonitors of airborne elements, suitable for use in developing countries, where adequate numbers of air monitoring instruments are unavailable due to financial, technical, and policy constraints.

  15. Long-term environmental monitoring of persistent organic pollutants and metals in a chemical/petrochemical area: human health risks.

    Science.gov (United States)

    Nadal, Martí; Schuhmacher, Marta; Domingo, José L

    2011-07-01

    Organic pollutants such as polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs) and polycyclic aromatic hydrocarbons (PAHs), as well as some metals are periodically monitored in soil and vegetation samples collected in Tarragona County (Spain). We here report the temporal trends of the concentrations of the above pollutants between the initial survey (2002) and that recently (2009) performed. The area under evaluation was divided into 4 sections (chemical, petrochemical, urban/residential and unpolluted). In general terms, urban soils presented the highest concentrations of PCDD/Fs, PCNs and PAHs, confirming that traffic is a very important emission source of these pollutants. In addition, substantially higher levels of PAHs and some metals were found in vegetation samples from the petrochemical complex. The assessment of health risks of these contaminants indicated that the current concentrations of micropollutants did not mean additional non-carcinogenic or cancer risks for the population living in the zone. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. Long-term environmental monitoring of persistent organic pollutants and metals in a chemical/petrochemical area: Human health risks

    Energy Technology Data Exchange (ETDEWEB)

    Nadal, Marti [Laboratory of Toxicology and Environmental Health, School of Medicine, IISPV, Universitat Rovira i Virgili, Sant Llorenc 21, 43201 Reus, Catalonia (Spain); Schuhmacher, Marta [Laboratory of Toxicology and Environmental Health, School of Medicine, IISPV, Universitat Rovira i Virgili, Sant Llorenc 21, 43201 Reus, Catalonia (Spain); Environmental Engineering Laboratory, Departament d' Enginyeria Quimica, Universitat Rovira i Virgili, Av. Paisos Catalans 26, 43007 Tarragona, Catalonia (Spain); Domingo, Jose L., E-mail: joseluis.domingo@urv.cat [Laboratory of Toxicology and Environmental Health, School of Medicine, IISPV, Universitat Rovira i Virgili, Sant Llorenc 21, 43201 Reus, Catalonia (Spain)

    2011-07-15

    Organic pollutants such as polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs) and polycyclic aromatic hydrocarbons (PAHs), as well as some metals are periodically monitored in soil and vegetation samples collected in Tarragona County (Spain). We here report the temporal trends of the concentrations of the above pollutants between the initial survey (2002) and that recently (2009) performed. The area under evaluation was divided into 4 sections (chemical, petrochemical, urban/residential and unpolluted). In general terms, urban soils presented the highest concentrations of PCDD/Fs, PCNs and PAHs, confirming that traffic is a very important emission source of these pollutants. In addition, substantially higher levels of PAHs and some metals were found in vegetation samples from the petrochemical complex. The assessment of health risks of these contaminants indicated that the current concentrations of micropollutants did not mean additional non-carcinogenic or cancer risks for the population living in the zone. - Highlights: > Traffic is an important emission source of persistent organic pollutants. > Oil refineries could be notable releasers of PAHs and some metals in the area. > Soil pollutant levels are notably lower than threshold values. > The air quality of Tarragona area is not greatly affected by metals and POPs. > The current exposure to micropollutants does not mean additional health risks. - Human exposure to environmental micropollutants in the industrial area of Tarragona does not mean additional health risks.

  17. The Reality of Project Management Office for Construction Organization in the Oil, Gas and Petrochemical Industry of Iran

    Directory of Open Access Journals (Sweden)

    Homayoun Izadpanah

    2012-08-01

    Full Text Available Over the last decade, the Project Management Office (PMO has become a prominent feature in many organizations. Despite the proliferation of PMO in practice, our understanding of this phenomenon remains sketchy at best. The objective of this study is describing the reality of PMOs for Construction Organization in the Oil, Gas and Petrochemical Industry of Iran at 2010 year. Nine major Iranian oil, gas and petrochemical organizations were participated in this survey. The study examines the reality of PMOs, the age of PMOs, the reason for their implementation and challenges during their implementation. Research concludes that PMO are a new concept and nearly 60% of PMOs have been in existence for 3 years. Monitoring project performance, supporting project management software tools and preparing project management methodology are the most used functions. Organizations are using PMOs to achieve the golden triangle project objectives (cost/time/quality. The study found that the most significant challenges in PMO implementation are the risk of changing organizational culture and the lack of professional staff.

  18. 14 CFR 27.687 - Spring devices.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Spring devices. 27.687 Section 27.687... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Control Systems § 27.687 Spring devices. (a) Each control system spring device whose failure could cause flutter or other unsafe...

  19. 14 CFR 23.687 - Spring devices.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Spring devices. 23.687 Section 23.687 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... Systems § 23.687 Spring devices. The reliability of any spring device used in the control system must...

  20. 14 CFR 29.687 - Spring devices.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Spring devices. 29.687 Section 29.687... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Control Systems § 29.687 Spring devices. (a) Each control system spring device whose failure could cause flutter or other unsafe...

  1. Spring-forward in composite plate elements

    NARCIS (Netherlands)

    Wijskamp, Sebastiaan; Lamers, E.A.D.; Akkerman, Remko; Banabic, D.

    2005-01-01

    Spring-forward is a distortion of corner sections in continuous fibre reinforced composite products. The linear thermoelastic prediction for the spring-forward of single curved geometries is incorporated in a FE formulation for plate elements in order to simulate the spring-forward of doubly curved

  2. Radon in Himalayan springs: a geohydrological control

    Energy Technology Data Exchange (ETDEWEB)

    Choubey, V.M.; Bartarya, S.K. [Wadia Inst. of Himalayan Geology, Dehra Dun (India); Ramola, R.C. [Garhwal Univ., Srinagar, Uttar Pradesh (India). Dept. of Physics

    2000-04-01

    This paper presents the results of radon measurements in springs of the Himalayan region by using radon emanometry technique. The radon was measured in different springs, draining from different geohydrological setups, and from stream water in order to find the geohydrological control over radon concentration in groundwater emanating in the form of spring. The radon values were found to vary from 0.4 Bq/l to 887 Bq/l, being observed lowest for a turbulent stream and highest for the spring. The radon values were recorded highest in the springs draining through gneiss, granite, mylonite, etc. Radon concentrations have been related with four spring types viz. fracture-joint related spring, fault-lineament related spring, fluvial related spring and colluvial related spring, showing geohydrological characteristics of the rocks through which they are emanating. The high radon concentration in fracture-joint and fault-lineament springs is related to increased ratio of rock surface area to water volume and uranium mineralisation in the shear zones present in the close vicinity of fault and thrust. The low concentration of radon in fluvial and colluvial springs is possibly because of high transmissivity and turbulent flow within such deposits leading to natural de-emanation of gases. (orig.)

  3. Spring-forward in composite plate elements

    NARCIS (Netherlands)

    Wijskamp, S.; Lamers, E.A.D.; Akkerman, R.

    2005-01-01

    Spring-forward is a distortion of corner sections in continuous fibre reinforced composite products. The linear thermoelastic prediction for the spring-forward of single curved geometries is incorporated in a FE formulation for plate elements in order to simulate the spring-forward of doubly curved

  4. 49 CFR 236.822 - Switch, spring.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Switch, spring. 236.822 Section 236.822 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Switch, spring. A switch equipped with a spring device which forces the points to their original...

  5. Skillful Use of Imagery in Two Odes to Spring--Comment on The Soote Season and Spring, the Sweet Spring

    Institute of Scientific and Technical Information of China (English)

    冯海荣

    2002-01-01

    The Soote Season and Spring, the Sweet Spring are two lyrics that sing the praise of spring. The common feature of the two lyrics is that the two poets depict a series of pictures of the sweet spring by rich and varied imagery for readers.When these pictures are presented to readers ,readers feel as if they are participating in them,and the enchanting beauty of spring makes readers feel intoxicated with happiness. The two poets express their different feelings toward nature.

  6. The first CERN Spring Campus

    CERN Multimedia

    CERN Bulletin

    2014-01-01

    From 14 to 16 April, the first edition of the CERN Spring Campus took place in Spain. Taking place over three intensive days, this event brought experts from CERN together at the University of Oviedo, where they met the engineers and scientists of the future in a programme of scientific and technological dissemination and cultural exchange.   The young participants of the first CERN Spring Campus and their instructors show their enthusiasm after the intensive three-day course. “This three-day school focuses on preparing young engineers for the job market, with a particular emphasis on computing,” explains Derek Mathieson, Advanced Information Systems Group Leader in the GS Department and Head of the CERN Spring Campus organising committee. “We organised talks on entrepreneurship and IT, as well as on job interviews and CV writing. It was also an important opportunity for the participants to meet CERN computing engineers to find out what it is like to work in I...

  7. Disaggregation modelling of spring discharges

    Directory of Open Access Journals (Sweden)

    Kirilova Bojilova Elena

    2004-12-01

    Full Text Available Disaggregation models are basically divided into three main groups: temporal, spatial and temporal-spatial. The focus of this paper is the application of temporal disaggregation models to disaggregate the seasonal flow in some large time intervals to sub-seasonal flows in some shorter time intervals. Two basic models are applied: the original model of Mejia and Rousselle and the corrected extended Lin model one-stage disaggregation. The flow totals from some karstic springs are used. Data for five springs in different areas of Bulgaria for the aims of the study are executed. The synthetic data generation for the chosen spring stations for a new realisation of thirty years is obtained. The multi-variate lag-one auto regressive model (AR(1 model is applied for generation of the annual flow sequences. The Lin model single- site is performed for thirty years generation period. The Lin model is an improvement compared to the original extended model. The new Lin approach succeeds in the preservation of the additivity as well as the moments. Applying the Lin model one-stage disaggregation results in consistent model parameter estimates. As a second step in the research multi-site disaggregation schemes are also applied.

  8. Bright sand/dark dust: The identification of active sand surfaces on the Earth and Mars

    Science.gov (United States)

    Blount, H. G., II; Greeley, R.; Christensen, P. R.; Arvidson, R.

    1987-05-01

    Field studies and analysis of LANDSAT Thematic Mapper data in the Gran Desierto, Mexico may shed light on a technique to distinguish active from inactive (relict) sand surfaces. Active sand bodies in the study area are consistently brighter (by an average of 20%) at visual and near infrared wavelengths and darker at thermal infrared wavelengths than compositionally similar inactive sands. The reasons for the albedo difference between active and inactive sands are reviewed and the mixing model of Johnson et al. is examined for tracing the provenance of sands based on albedo and spectral variations. Portions of the wavelengths covered by the Mars Orbiter correspond to the Thematic Mapper data. The identification of active sands on Earth, with a priori knowledge of bulk composition and grain size distribution, may allow the remote mapping of active sand surfaces on Mars. In conjuction with thermal infrared remote sensing for composition, it may also provide a method for the remote determination of grain size distributions within sand/silt mixtures.

  9. Simulating and understanding sand wave variation: A case study of the Golden Gate sand waves

    Science.gov (United States)

    Sterlini, F.; Hulscher, S.J.M.H.; Hanes, D.M.

    2009-01-01

    In this paper we present a detailed comparison between measured features of the Golden Gate sand wave field and the results of a nonlinear sand wave model. Because the Golden Gate sand waves exhibit large variation in their characteristics and in their environmental physics, this area gives us the opportunity to study sand wave variation between locations, within one well-measured, large area. The nonlinear model used in this paper is presently the only tool that provides information on the nonlinear evolution of large-amplitude sand waves. The model is used to increase our understanding of the coupling between the variability in environmental conditions and the sand wave characteristics. Results show that the model is able to describe the variation in the Golden Gate sand waves well when both the local oscillating tidal current and the residual current are taken into account. Current and water depth seem to be the most important factors influencing sand wave characteristics. The simulation results give further confidence in the underlying model hypothesis and assumptions. Copyright 2009 by the American Geophysical Union.

  10. MORPHOMETRIC CHARACTERIZATION OF THE SAND FRACTION IN A SAND GRAIN IMAGE CAPTURE SYSTEM1

    Directory of Open Access Journals (Sweden)

    Lucimar Arruda Viana

    Full Text Available ABSTRACT Morphology studies assume significant importance in analysis of phenomena of granular systems packaging, in particular with a view to the use of the technique of soil stabilization named particle size correction in forest roads. In this context, this study aimed to develop and operationalize a Sand Grain Image Capture System and, hereby, determine the morphological indices of the sand fractions of two sandy soils called João Pinheiro (JP and Cachoeira da Prata (CP. Soil samples, air-dried, were sieved (2.0 mm nominal mesh size for removal of gravels. The materials that passed through the sieve were subjected to dispersion, washing in 0.053 mm nominal mesh size sieve, removal of organic matter and iron oxides to obtain the clean sand fractions. Subsequently, each soil sample was sieved for separation into twelve classes, between the diameters of 0.149 mm and 1.190 mm, using a Rotap shaker. Next, tests were carried out to characterize the morphometric attributes of the twelve classes of sand fractions of the soils studied. For validation of the performance of the Sand Grain Image Capture System, the results were compared to those obtained using a standard procedure for image analysis. The analysis of the results led to the following conclusions: (i the sand fraction of the JP soil presented higher values for the morphometric indices roundness, elongation and compactness compared to sand fraction of the CP soil; and (ii the Sand Grain Image Capture System worked properly, with practicality.

  11. Probability of rebound and eject of sand particles in wind-blown sand movement

    Institute of Scientific and Technical Information of China (English)

    Li Xie; Xiaojing Zheng

    2007-01-01

    When incident particles impact into a sand bed in wind-blown sand movement, rebound of the incident particles and eject of the sand particles by the incident particles affect directly the development of wind sand flux. In order to obtain rebound and eject lift-off probability of the sand particles, we apply the particle-bed stochastic collision model presented in our pervious works to derive analytic solutions of velocities of the incident and impacted particles in the postcollision bed. In order to describe randomness inherent in the real particle-bed collision, we take the incident angle, theimpact position and the direction of resultant action of sand particles in sand bed on the impacted sand particle as random variables, and calculate the rebound and eject velocities,angles and coefficients (ratio of rebound and eject velocity to incident velocity). Numerical results are found in accordance with current experimental results. The rebound and eject lift-off probabilities versus the incident and creeping velocities are predicted.

  12. Pretreatment of turkey fat-containing wastewater in coarse sand and gravel/coarse sand bioreactors.

    Science.gov (United States)

    Gaur, Rashmi Singh; Cai, Ling; Tuovinen, Olli H; Mancl, Karen M

    2010-02-01

    Fat, oil and grease in wastewater can be difficult to treat because of their slow decomposition. Traditional pretreatment facilities to remove fat, oil and grease from wastewater are increasingly costly. The hypothesis in this study was that pretreatment of animal fat-containing wastewater in sand and sand/gravel filters facilitates the conversion of slowly degradable organic matter measured as the difference between chemical oxygen demand (COD) and 5-day biochemical oxygen demand (BOD(5)) for subsequent biological treatment. The pretreatment was evaluated using simulated turkey-processing wastewater and coarse sand and sand/gravel filters at a constant hydraulic loading rate of 132L/m(2)/day. Two types of fixed media reactors were employed: (i) one set with a varying depth of coarse sand, and (ii) the second was similar but with an additional pea gravel cap. The results indicated that the relative removal of COD was slightly improved in the sand bioreactors with a pea gravel cap irrespective of the depth of coarse sand, but partial conversion to BOD(5) was not consistently demonstrated. Pea gravel may act as a sieve to entrap organic matter including fat globules from the wastewater. Multiple dosing at the same daily loading rate slightly improved the treatment efficiency of the sand bioreactors. The ratios of influent-COD/effluent-COD were always greater than 1.0 following a change in the dosing frequency after a rest period, suggesting that organic matter, specifically fat globules in this case, was retained by the column matrix.

  13. Spring Recipes A Problem-solution Approach

    CERN Document Server

    Long, Josh; Mak, Gary

    2010-01-01

    With over 3 Million users/developers, Spring Framework is the leading "out of the box" Java framework. Spring addresses and offers simple solutions for most aspects of your Java/Java EE application development, and guides you to use industry best practices to design and implement your applications. The release of Spring Framework 3 has ushered in many improvements and new features. Spring Recipes: A Problem-Solution Approach, Second Edition continues upon the bestselling success of the previous edition but focuses on the latest Spring 3 features for building enterprise Java applications.

  14. Capturing phosphates with iron enhanced sand filtration.

    Science.gov (United States)

    Erickson, Andrew J; Gulliver, John S; Weiss, Peter T

    2012-06-01

    Most treatment practices for urban runoff capture pollutants such as phosphorus by either settling or filtration while dissolved phosphorus, typically as phosphates, is untreated. Dissolved phosphorus, however, represents an average 45% of total phosphorus in stormwater runoff and can be more than 95%. In this study, a new stormwater treatment technology to capture phosphate, called the Minnesota Filter, is introduced. The filter comprises iron filings mixed with sand and is tested for phosphate removal from synthetic stormwater. Results indicate that sand mixed with 5% iron filings captures an average of 88% phosphate for at least 200 m of treated depth, which is significantly greater than a sand filter without iron filings. Neither incorporation of iron filings into a sand filter nor capture of phosphates onto iron filings in column experiments had a significant effect on the hydraulic conductivity of the filter at mixtures of 5% or less iron by weight. Field applications with up to 10.7% iron were operated over 1 year without detrimental effects upon hydraulic conductivity. A model is applied and fit to column studies to predict the field performance of iron-enhanced sand filters. The model predictions are verified through the predicted performance of the filters in removing phosphates in field applications. Practical applications of the technology, both existing and proposed, are presented so stormwater managers can begin implementation.

  15. Cleaning oil sands drilling waste in Alberta

    Energy Technology Data Exchange (ETDEWEB)

    Mikic, N.; Nilsen, C.; Markabi, M. [Mi SWACO, Calgary, AB (Canada)

    2008-07-01

    The waste generated from steam assisted gravity drainage (SAGD) wells is brought to the surface and separated by shale shakers. The waste can include drilling fluids and sand contaminated with bitumen. This paper described a new technology developed to treat waste using the addition of hot water and various mixing and separation technologies to reduce the viscosity of the bitumen and separate it from the sand. The bitumen-contaminated drill cuttings were mixed with hot water to form a slurry that was then separated through the G-force created by a hydrocyclone. A secondary separation was then conducted in an elutriation column to remove residual contaminants from the sand. The flow rate of the process was controlled by the fine solids composition of the cuttings, the temperature of the cleaning process, and the performance of the individual components. Laboratory tests conducted to tests the method showed that the sand particles produced using the method were clean enough to be safely disposed in the environment. A pilot study will be conducted to test the sand cleaning technology at a commercial scale. 6 refs., 3 figs.

  16. Mitigating in situ oil sands carbon costs

    Energy Technology Data Exchange (ETDEWEB)

    Theriault, D.J.; Peterson, J. [Laricina Energy Ltd., Calgary, AB (Canada); Heinrichs, H. [Canadian Chemical Technology Inc., Calgary, AB (Canada)

    2008-10-15

    Carbon capture and sequestration is a complex problem with a variety of dimensions that need to be considered. The political, social, and regulatory pressures are forcing carbon costs on the oil sands industry in an effort to reduce the carbon footprint of oil sands operations. This paper reviewed the political, social, and regulatory pressures and obligations for the in-situ oil sands industry. It presented the views and insights of Laricina Energy on the carbon challenge. It also described the initiatives that Laricina Energy is taking to manage these imperatives and outlined the challenges the industry is facing. The purpose of the paper was to encourage dialogue and collaboration by the oil sands industry. The paper also described the dimensions of the carbon problem and how the industry can contribute to a solution. Last, the paper reviewed the parameters of carbon dioxide or greenhouse gas containment and storage issues. It was concluded that the regulatory and policy requirements need to be clarified so that industry understands the new business landscape as well as the requirements that influence the economics of in-situ oil sands development. 7 refs., 7 figs.

  17. Leaching of nitrate and phosphorus after autumn and spring application of separated solid manures to winter wheat

    DEFF Research Database (Denmark)

    Sørensen, Peter; Rubæk, Gitte Holton

    2012-01-01

    on a loamy sand and a sandy loam soil. The leaching experiment lasted for 2 yr, and the whole experiment was replicated twice. Nitrate leaching was generally low (19–34 kg N/ha) after spring applications of mineral fertilizer and manures. Nitrate leaching increased significantly after autumn application......, solid manure fractions should not be applied to winter wheat on sandy and sandy loam soils under humid North European conditions....

  18. Field investigation of surface sand and dust movement over different sandy grasslands in the Otindag Sandy Land, China

    Science.gov (United States)

    Liu, Shulin; Wang, Tao; Chen, Guangting; Guo, Jian; Xue, Xian; Ma, Shaoxiu

    2008-01-01

    The characteristics of sand and dust movement over different sandy grasslands in China’s Otindag Sandy Land were explored based on field observations and laboratory analyses. Threshold wind speeds (the speed required to initiate sand movement) at a height of 2 m above the ground were estimated in the field for different surface types. Threshold wind speed above shifting dunes in the study area is about 4.6 m s-1 at this height. This value was smaller than values observed above other surfaces, resulting in a greater risk of blowing sand above these dunes. Differences in sand transport rates (STR) as a function of the severity of desertification resulted primarily from differences in surface vegetation cover and secondarily from the soil’s grain-size distribution. STR increased exponentially with increasing near-bed wind velocity. Under the same wind conditions, STR increased with increasing severity of desertification: from 0.08 g cm-2 min-1 above semi-fixed dunes to 8 g cm-2 min-1 above semi-shifting dunes and 25 g cm-2 min-1 above shifting dunes. Vegetation’s affect on STR was clearly large. Different components of sand and dust were trapped over different lands: mostly sand grains but little dust were trapped above shifting dunes, but much dust was collected over semi-shifting and semi-fixed dunes. Human disturbance is likely to produce dust even from fixed dunes as a result of trampling by animals and vehicle travel. In addition, spring rainfall decreased the risk of sand and dust movement by accelerating germination of plants and the formation of a soil crust.

  19. Comparative spring mechanics in mantis shrimp.

    Science.gov (United States)

    Patek, S N; Rosario, M V; Taylor, J R A

    2013-04-01

    Elastic mechanisms are fundamental to fast and efficient movements. Mantis shrimp power their fast raptorial appendages using a conserved network of exoskeletal springs, linkages and latches. Their appendages are fantastically diverse, ranging from spears to hammers. We measured the spring mechanics of 12 mantis shrimp species from five different families exhibiting hammer-shaped, spear-shaped and undifferentiated appendages. Across species, spring force and work increase with size of the appendage and spring constant is not correlated with size. Species that hammer their prey exhibit significantly greater spring resilience compared with species that impale evasive prey ('spearers'); mixed statistical results show that species that hammer prey also produce greater work relative to size during spring loading compared with spearers. Disabling part of the spring mechanism, the 'saddle', significantly decreases spring force and work in three smasher species; cross-species analyses show a greater effect of cutting the saddle on the spring force and spring constant in species without hammers compared with species with hammers. Overall, the study shows a more potent spring mechanism in the faster and more powerful hammering species compared with spearing species while also highlighting the challenges of reconciling within-species and cross-species mechanical analyses when different processes may be acting at these two different levels of analysis. The observed mechanical variation in spring mechanics provides insights into the evolutionary history, morphological components and mechanical behavior, which were not discernible in prior single-species studies. The results also suggest that, even with a conserved spring mechanism, spring behavior, potency and component structures can be varied within a clade with implications for the behavioral functions of power-amplified devices.

  20. Permeability Tests on Eastern Scheldt Sand

    DEFF Research Database (Denmark)

    Jakobsen, Kim Parsberg

    The flow through porous media plays an important role in various engineering disciplines, as for example in ground water hydrology and soil mechanics. In the present study the permeability is determined for a fine, saturated sand. As the flow through a porous media strongly depends on the charact......The flow through porous media plays an important role in various engineering disciplines, as for example in ground water hydrology and soil mechanics. In the present study the permeability is determined for a fine, saturated sand. As the flow through a porous media strongly depends...... on the characteristics of the soil matrix, the permeability is determined for different void ratios. All tests are performed on reconstituted specimens of Eastern Scheldt Sand. The permeability is determined by use of a falling head apparatus. Finally the test results are briefly summarised and a relationship between...... void ratio and permeability is established....