WorldWideScience

Sample records for sample pretreatment schemes

  1. Trends and perspectives of flow injection/sequential injection on-line sample-pretreatment schemes coupled to ETAAS

    DEFF Research Database (Denmark)

    Wang, Jianhua; Hansen, Elo Harald

    2005-01-01

    Flow injection (FI) analysis, the first generation of this technique, became in the 1990s supplemented by its second generation, sequential injection (SI), and most recently by the third generation (i.e.,Lab-on-Valve). The dominant role played by FI in automatic, on-line, sample pretreatments in ......-review is thus to illustrate the state-of-the-art progress in implementing miniaturised FI/SI systems for on-line separation and preconcentration of trace metals with detection by ETAAS since 2000. We also discuss future perspectives in this field....

  2. Sampling scheme optimization from hyperspectral data

    NARCIS (Netherlands)

    Debba, P.

    2006-01-01

    This thesis presents statistical sampling scheme optimization for geo-environ-menta] purposes on the basis of hyperspectral data. It integrates derived products of the hyperspectral remote sensing data into individual sampling schemes. Five different issues are being dealt with.First, the optimized

  3. Implementation of suitable flow injection/sequential injection on-line sample pretreatment schemes. Separation and preconcentration procedures for the determination of trace metal concentrations by ETAAS and/or ICPMS

    DEFF Research Database (Denmark)

    Hansen, Elo Harald; Wang, Jianhua

    Despite their excellent analytical chemical capacities, ETAAS and ICPMS, nevertheless, often require suitable pretreatment of the sample material in order to obtain the necessary sensitivity and selectivity. Either in order to separate/preconcentrate the analyte material, or because of the presence...... of potentially interfering matrix constituents. Such pretreatments are advantageously performed in flow injection (FI) or sequential injection (SI) manifolds, where all appropriate unit operations can be effected under enclosed and strictly controlled conditions. Various separation/preconcentration procedures......, the ICPMS has potentially a larger volumetric capacity yet cannot accept organic solvents as these adversely will impair its performance. In the lecture, selected examples of separation/preconcentration FI/SI-procedures will be presented, with particular emphasis on the use of the novel “lab...

  4. Designing optimal sampling schemes for field visits

    CSIR Research Space (South Africa)

    Debba, Pravesh

    2008-10-01

    Full Text Available This is a presentation of a statistical method for deriving optimal spatial sampling schemes. The research focuses on ground verification of minerals derived from hyperspectral data. Spectral angle mapper (SAM) and spectral feature fitting (SFF...

  5. Why sampling scheme matters: the effect of sampling scheme on landscape genetic results

    Science.gov (United States)

    Michael K. Schwartz; Kevin S. McKelvey

    2008-01-01

    There has been a recent trend in genetic studies of wild populations where researchers have changed their sampling schemes from sampling pre-defined populations to sampling individuals uniformly across landscapes. This reflects the fact that many species under study are continuously distributed rather than clumped into obvious "populations". Once individual...

  6. Protein precipitation methods for sample pretreatment of grass pea ...

    African Journals Online (AJOL)

    Protein precipitation methods for sample pretreatment of grass pea extracts. Negussie Wodajo, Ghirma Moges, Theodros Solomon. Abstract. Bull. Chem. Soc. Ethiop. 1996, 10(2), 129-134. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. Article Metrics.

  7. Isoelectric focusing: Sample pretreatment – separation – hyphenation

    NARCIS (Netherlands)

    Silvertand, L.H.H.|info:eu-repo/dai/nl/304832871

    2009-01-01

    The three major goals of the research presented in this thesis are: • Investigation of electrophoretic sample pretreatment strategies. • Study and optimization of capillary isoelectric focusing for separation of proteins. • Hyphenation of isoelectric focusing to MS and iSPR. Chapter 2 gives an

  8. Weighted polynomial models and weighted sampling schemes for finite population

    OpenAIRE

    Chen, Sean X.

    1998-01-01

    This paper outlines a theoretical framework for finite population models with unequal sample probabilities, along with sampling schemes for drawing random samples from these models. We first present four exact weighted sampling schemes that can be used for any finite population model to satisfy such requirements as ordered/ unordered samples, with/without replacement, and fixed/nonfixed sample size. We then introduce a new class of finite population models called weighted po...

  9. Recent applications of metal-organic frameworks in sample pretreatment.

    Science.gov (United States)

    Wang, Yonghua; Rui, Min; Lu, Guanghua

    2017-06-19

    Metal-organic frameworks are promising materials in diverse analytical applications especially in sample pretreatment by virtue of their diverse structure topology, tunable pore size, permanent nanoscale porosity, high surface area, and good thermostability. According to hydrostability, metal-organic frameworks are divided into moisture-sensitive and water-stable types. In the actual applications, both kinds of metal-organic frameworks are usually engineered into hybrid composites containing magnetite, silicon dioxide, graphene, or directly carbonized to metal-organic frameworks derived carbon. These metal-organic frameworks based materials show good extraction performance to environmental pollutants. This review provides a critical overview of the applications of metal-organic frameworks and their composites in sample pretreatment modes, that is, solid-phase extraction, magnetic solid-phase extraction, micro-solid-phase extraction, solid-phase microextraction, and stir bar solid extraction. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Field sampling scheme optimization using simulated annealing

    CSIR Research Space (South Africa)

    Debba, Pravesh

    2010-10-01

    Full Text Available (1993); Salisbury et al. (1991); Van der Meer (2004). Various mapping of minerals using hyperspectral data can be found in Crósta et al. (1998); Kruse & Boardman (1997); Rowan et al. (2000); Sabins (1999); Vaughan et al. (2003). Surface sampling... features of these minerals. Thorough discussions on absorption features of hy- drothermal alteration minerals can be found in Clark (1999); Hapke (1993); Salisbury et al. (1991); Van der Meer (2004). Various mapping of minerals using hyperspectral data...

  11. Optimal sampling schemes for vegetation and geological field visits

    CSIR Research Space (South Africa)

    Debba, Pravesh

    2012-07-01

    Full Text Available The presentation made to Wits Statistics Department was on common classification methods used in the field of remote sensing, and the use of remote sensing to design optimal sampling schemes for field visits with applications in vegetation...

  12. Comparison of kriging interpolation precision between grid sampling scheme and simple random sampling scheme for precision agriculture

    Directory of Open Access Journals (Sweden)

    Jiang Houlong

    2016-01-01

    Full Text Available Sampling methods are important factors that can potentially limit the accuracy of predictions of spatial distribution patterns. A 10 ha tobacco-planted field was selected to compared the accuracy in predicting the spatial distribution of soil properties by using ordinary kriging and cross validation methods between grid sampling and simple random sampling scheme (SRS. To achieve this objective, we collected soil samples from the topsoil (0-20 cm in March 2012. Sample numbers of grid sampling and SRS were both 115 points each. Accuracies of spatial interpolation using the two sampling schemes were then evaluated based on validation samples (36 points and deviations of the estimates. The results suggested that soil pH and nitrate-N (NO3-N had low variation, whereas all other soil properties exhibited medium variation. Soil pH, organic matter (OM, total nitrogen (TN, cation exchange capacity (CEC, total phosphorus (TP and available phosphorus (AP matched the spherical model, whereas the remaining variables fit an exponential model with both sampling methods. The interpolation error of soil pH, TP, and AP was the lowest in SRS. The errors of interpolation for OM, CEC, TN, available potassium (AK and total potassium (TK were the lowest for grid sampling. The interpolation precisions of the soil NO3-N showed no significant differences between the two sampling schemes. Considering our data on interpolation precision and the importance of minerals for cultivation of flue-cured tobacco, the grid-sampling scheme should be used in tobacco-planted fields to determine the spatial distribution of soil properties. The grid-sampling method can be applied in a practical and cost-effective manner to facilitate soil sampling in tobacco-planted field.

  13. Advances in paper-based sample pretreatment for point-of-care testing.

    Science.gov (United States)

    Tang, Rui Hua; Yang, Hui; Choi, Jane Ru; Gong, Yan; Feng, Shang Sheng; Pingguan-Murphy, Belinda; Huang, Qing Sheng; Shi, Jun Ling; Mei, Qi Bing; Xu, Feng

    2017-06-01

    In recent years, paper-based point-of-care testing (POCT) has been widely used in medical diagnostics, food safety and environmental monitoring. However, a high-cost, time-consuming and equipment-dependent sample pretreatment technique is generally required for raw sample processing, which are impractical for low-resource and disease-endemic areas. Therefore, there is an escalating demand for a cost-effective, simple and portable pretreatment technique, to be coupled with the commonly used paper-based assay (e.g. lateral flow assay) in POCT. In this review, we focus on the importance of using paper as a platform for sample pretreatment. We firstly discuss the beneficial use of paper for sample pretreatment, including sample collection and storage, separation, extraction, and concentration. We highlight the working principle and fabrication of each sample pretreatment device, the existing challenges and the future perspectives for developing paper-based sample pretreatment technique.

  14. An Adaptive Transmitting Scheme for Interrupted Sampling Repeater Jamming Suppression

    Directory of Open Access Journals (Sweden)

    Chao Zhou

    2017-10-01

    Full Text Available The interrupted sampling repeater jamming (ISRJ based on a digital radio frequency memory (DRFM device is a new type of coherent jamming. This kind of jamming usually occurs as main-lobe jamming and has the advantages of low power requirements and easy parameter adjustment, posing a serious threat to the modern radar systems. In order to suppress the ISRJ, this paper proposes an adaptive transmitting scheme based on a phase-coded signal. The scheme firstly performs jamming perception to estimate the jamming parameters, then, on this basis, optimizes the waveform with genetic algorithm. With the optimized waveform, the jamming signal is orthogonal to the target echo, thus it can be easily suppressed with pulse compression. Simulation experiments are performed to verify the effectiveness of the scheme and the results suggest that the peak-to-side-lobe ratio (PSR and integrated side-lobe level (ISL of the pulse compression can be improved by about 16 dB and 15 dB, respectively, for the case where the jamming-to-signal ratio (JSR is 13 dB.

  15. An Adaptive Transmitting Scheme for Interrupted Sampling Repeater Jamming Suppression.

    Science.gov (United States)

    Zhou, Chao; Liu, Feifeng; Liu, Quanhua

    2017-10-29

    The interrupted sampling repeater jamming (ISRJ) based on a digital radio frequency memory (DRFM) device is a new type of coherent jamming. This kind of jamming usually occurs as main-lobe jamming and has the advantages of low power requirements and easy parameter adjustment, posing a serious threat to the modern radar systems. In order to suppress the ISRJ, this paper proposes an adaptive transmitting scheme based on a phase-coded signal. The scheme firstly performs jamming perception to estimate the jamming parameters, then, on this basis, optimizes the waveform with genetic algorithm. With the optimized waveform, the jamming signal is orthogonal to the target echo, thus it can be easily suppressed with pulse compression. Simulation experiments are performed to verify the effectiveness of the scheme and the results suggest that the peak-to-side-lobe ratio (PSR) and integrated side-lobe level (ISL) of the pulse compression can be improved by about 16 dB and 15 dB, respectively, for the case where the jamming-to-signal ratio (JSR) is 13 dB.

  16. Determination of alkylphenols and alkylphenol ethoxylates in sewage sludge: effect of sample pre-treatment.

    Science.gov (United States)

    Fernández-Sanjuan, María; Rigol, Anna; Sahuquillo, Angels; Rodríguez-Cruz, Sonia; Lacorte, Silvia

    2009-07-01

    A complete characterization of sewage sludge collected from five biological waste water treatment plants was done to determine physico-chemical parameters, heavy metals and alkylphenols, making special emphasis on sampling, homogenization, and sample pre-treatment. Ultrasonic extraction followed by gas chromatrography coupled with mass spectrometry was used to evaluate the effect of sample pre-treatment (untreated sample, freeze-drying, drying at 40 degrees C or drying at 100 degrees C) on the concentration of octylphenol (OP), nonylphenol (NP) and nonylphenol ethoxylates (NP1EO, NP2EO). Untreated samples and samples dried at 100 degrees C gave concentration levels up to 62% and 89% lower, respectively, than freeze-dried samples. In 50% of cases, freeze-dried samples led to significantly higher concentrations than those obtained by drying at 40 degrees C. Thus, freeze-drying is the recommended sample pre-treatment to prevent possible losses of OP, NP, and NP1EO. Using this methodology, concentrations detected were from 3.2 to 199 mg kg(-1) being NP followed by NP1EO found in highest concentration. The total concentration of NP and NP1EO exceeded the limit of 50 mg kg(-1) proposed by the draft European directive on sewage sludge in three out of five samples studied. Contrarily, heavy metals were below the legislated values.

  17. Determination of alkylphenols and alkylphenol ethoxylates in sewage sludge: effect of sample pre-treatment

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Sanjuan, Maria; Rigol, Anna; Sahuquillo, Angels [University of Barcelona, Department of Analytical Chemistry, Barcelona (Spain); Rodriguez-Cruz, Sonia [University of Barcelona, Department of Analytical Chemistry, Barcelona (Spain); IRNASA-CSIC, Department of Environmental Chemistry and Geochemistry, Salamanca (Spain); Lacorte, Silvia [IDAEA-CSIC, Department of Environmental Chemistry, Barcelona (Spain)

    2009-07-15

    A complete characterization of sewage sludge collected from five biological waste water treatment plants was done to determine physico-chemical parameters, heavy metals and alkylphenols, making special emphasis on sampling, homogenization, and sample pre-treatment. Ultrasonic extraction followed by gas chromatrography coupled with mass spectrometry was used to evaluate the effect of sample pre-treatment (untreated sample, freeze-drying, drying at 40 C or drying at 100 C) on the concentration of octylphenol (OP), nonylphenol (NP) and nonylphenol ethoxylates (NP{sub 1}EO, NP{sub 2}EO). Untreated samples and samples dried at 100 C gave concentration levels up to 62% and 89% lower, respectively, than freeze-dried samples. In 50% of cases, freeze-dried samples led to significantly higher concentrations than those obtained by drying at 40 C. Thus, freeze-drying is the recommended sample pre-treatment to prevent possible losses of OP, NP, and NP{sub 1}EO. Using this methodology, concentrations detected were from 3.2 to 199 mg kg{sup -1} being NP followed by NP{sub 1}EO found in highest concentration. The total concentration of NP and NP{sub 1}EO exceeded the limit of 50 mg kg{sup -1} proposed by the draft European directive on sewage sludge in three out of five samples studied. Contrarily, heavy metals were below the legislated values. (orig.)

  18. Effect of sample pre-treatment on the determination of steroid esters in hair of bovine calves

    NARCIS (Netherlands)

    Aqai, P.; Stolker, A.A.M.; Lasaroms, J.J.P.

    2009-01-01

    The effect of three sample pre-treatment steps, washing, cutting and grinding on the determination of steroid esters in hair is studied. The study is performed by using hair samples obtained after pour-on application of steroid esters to bovine calves. After sample pre-treatment the hair is treated

  19. Increased detection of Dirofilaria immitis antigen in cats after heat pretreatment of samples.

    Science.gov (United States)

    Gruntmeir, Jeff M; Adolph, Chris B; Thomas, Jennifer E; Reichard, Mason V; Blagburn, Byron L; Little, Susan E

    2017-10-01

    Objectives To determine whether pretreating diagnostic samples with heat increases the detection of Dirofilaria immitis antigen in adult cats, we evaluated feline serum and plasma samples collected in heartworm-endemic areas of the southern United States. Methods Commercial microtiter well assays for detection of D immitis antigen were used to evaluate serum or plasma samples from 385 shelter and free-roaming cats from the southcentral and southeastern United States before and after heat treatment; commercial antibody tests were performed on a subset of samples. Results Prior to sample heat treatment, 1/220 (0.5%) shelter cats and 4/165 (2.4%) free-roaming cats had detectable D immitis antigen. After heat pretreatment, the detection rate increased to 13/220 (5.9%) and 13/165 (7.9%), respectively. Antibody reactive to D immitis was significantly more common ( P immitis and improved overall concordance of antigen and antibody test results in antigen-positive samples in this population. Although further work to investigate the specificity of D immitis antigen assays when using pre-treated samples is warranted, this approach may be useful in the diagnosis of heartworm infection in individual cats and may increase the accuracy of surveys based on antigen detection.

  20. Effect of sample pretreatment on the extraction of lemon (Citrus limon) components.

    Science.gov (United States)

    Ledesma-Escobar, Carlos A; Priego-Capote, Feliciano; Luque de Castro, María D

    2016-06-01

    A study on the key role of lemon sample pretreatment on the analytical results is here presented. The objective of the study was to analyze the differences between extracts obtained from lyophilized and air-dried samples-the most common sample pretreatment in citrus studies-in comparison to extracts from fresh samples. All the extracts were obtained with ultrasound assistance and analyzed by LC-QTOF MS/MS. The dataset, constituted by 74 tentative identified metabolites, was first evaluated by ANOVA, which showed significant differences in the concentration of 44 out of 74 metabolites (p≤0.01). Also, the pairwise mean comparison (Tukey HSD; p≤0.01) revealed that the concentration of metabolites in the extracts from fresh and air-dried samples was quite similar and differed from that in lyophilized samples. On the other hand, application of principal component analysis (PCA) showed a clear discrimination between pretreatments, explaining 86.20% of the total variability. The results of this study suggest that the main differences between extracts could be attributed to the effect of freezing or heating on metabolic pathways, and not only to thermolability of the compounds. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. Control charts for location based on different sampling schemes

    NARCIS (Netherlands)

    Mehmood, R.; Riaz, M.; Does, R.J.M.M.

    2013-01-01

    Control charts are the most important statistical process control tool for monitoring variations in a process. A number of articles are available in the literature for the X̄ control chart based on simple random sampling, ranked set sampling, median-ranked set sampling (MRSS), extreme-ranked set

  2. An Optimal Dimensionality Sampling Scheme on the Sphere for Antipodal Signals In Diffusion Magnetic Resonance Imaging

    CERN Document Server

    Bates, Alice P; Kennedy, Rodney A

    2015-01-01

    We propose a sampling scheme on the sphere and develop a corresponding spherical harmonic transform (SHT) for the accurate reconstruction of the diffusion signal in diffusion magnetic resonance imaging (dMRI). By exploiting the antipodal symmetry, we design a sampling scheme that requires the optimal number of samples on the sphere, equal to the degrees of freedom required to represent the antipodally symmetric band-limited diffusion signal in the spectral (spherical harmonic) domain. Compared with existing sampling schemes on the sphere that allow for the accurate reconstruction of the diffusion signal, the proposed sampling scheme reduces the number of samples required by a factor of two or more. We analyse the numerical accuracy of the proposed SHT and show through experiments that the proposed sampling allows for the accurate and rotationally invariant computation of the SHT to near machine precision accuracy.

  3. Design of a Pretreatment and Enzymatic Saccharification Scheme of Understory from Managed Pine Forest for a Biochemical-Refinery Platform: The Example of the Sweetgum Tree

    Science.gov (United States)

    Djioleu, Angele Mezindjou

    The possibility of using sweetgum from southern pine dominated forests as a biobased refinery feedstock was investigated. First, a baseline hydrolysis scheme for sweetgum wood and bark was designed. Sweetgum wood and bark were pretreated with 0.98% (v/v) sulfuric acid at 140°C for 30, 40, 50, 60 or 70 min and at 160°C for 30, 40, 50 or 60 min. The water insoluble solid (WIS) fraction was hydrolyzed with a cellulase enzyme cocktail. Results showed that maximum xylose and glucose yields from the wood were 82 and 86%, respectively. Similarly, the respective maximum yields of xylose and glucose from the bark were 93 and 24%. Concentrations of detected inhibitory compounds such as furfural, hydroxymethylfurfural (HMF), formic acid and acetic acid ranged from 0.1 to 32.3 g/ 100 g of raw dry biomass. The second part of this project investigated the effect of adding oak wood, sweetgum bark, or oak bark, to sweetgum wood on xylose and glucose yields obtained from dilute acid pretreatment and enzymatic hydrolysis. Carbohydrate recoveries for each species and mixed biomass samples were obtained by using previously established hydrolysis protocols at 160°C for 20 min. Mixed biomass samples were prepared to reflect real-life forestry harvesting scenario and consisted of 70% sweetgum wood plus 1) 30% sweetgum bark; 2) 30% oak bark; 3) 30% oak wood. 100% sweetgum was the control. Results showed that oak wood yielded 35% of its theoretical xylose content and sweetgum wood, 65%. Both woody species resulted in higher glucose and lower formic acid recoveries than their respective bark material. Analysis of data with the Dunnett Control's test in JMP 10.0 showed contamination of sweetgum wood did not have a significant effect (P > 0.05) on hydrolysis except with sweetgum bark which exhibited a significantly higher xylose concentration than the control. In conclusion, sweetgum wood was a good source of carbohydrate for a biobased refinery, but the removal of bark might be necessary

  4. A human gut metaproteomic dataset from stool samples pretreated or not by differential centrifugation.

    Science.gov (United States)

    Tanca, Alessandro; Palomba, Antonio; Pisanu, Salvatore; Addis, Maria Filippa; Uzzau, Sergio

    2015-09-01

    We present a human gut metaproteomic dataset deposited in the ProteomeXchange Consortium via the PRIDE partner repository with the dataset identifier PXD001573. Ten aliquots of a single stool sample collected from a healthy human volunteer were either pretreated by differential centrifugation (DC; N=5) or not centrifuged (NC; N=5). Protein extracts were then processed by filter-aided sample preparation, single-run liquid chromatography and high-resolution mass spectrometry, and peptide identification was carried out using Sequest-HT as search engine within the Proteome Discoverer informatic platform. The dataset described here is also related to the research article entitled "Enrichment or depletion? The impact of stool pretreatment on metaproteomic characterization of the human gut microbiota" published in Proteomics (Tanca et al., 2015), [1].

  5. A human gut metaproteomic dataset from stool samples pretreated or not by differential centrifugation

    Directory of Open Access Journals (Sweden)

    Alessandro Tanca

    2015-09-01

    Full Text Available We present a human gut metaproteomic dataset deposited in the ProteomeXchange Consortium via the PRIDE partner repository with the dataset identifier PXD001573. Ten aliquots of a single stool sample collected from a healthy human volunteer were either pretreated by differential centrifugation (DC; N=5 or not centrifuged (NC; N=5. Protein extracts were then processed by filter-aided sample preparation, single-run liquid chromatography and high-resolution mass spectrometry, and peptide identification was carried out using Sequest-HT as search engine within the Proteome Discoverer informatic platform. The dataset described here is also related to the research article entitled “Enrichment or depletion? The impact of stool pretreatment on metaproteomic characterization of the human gut microbiota” published in Proteomics (Tanca et al., 2015, [1].

  6. Measurements of dissolved organic nitrogen (DON) in water samples with nanofiltration pretreatment.

    Science.gov (United States)

    Xu, Bin; Li, Da-Peng; Li, Wei; Xia, Sheng-Ji; Lin, Yi-Li; Hu, Chen-Yan; Zhang, Cao-Jie; Gao, Nai-Yun

    2010-10-01

    Dissolved organic nitrogen (DON) measurements for water samples with a high dissolved inorganic nitrogen (DIN, including nitrite, nitrate and ammonia) to total dissolved nitrogen (TDN) ratio using traditional methods are inaccurate due to the cumulative analytical errors of independently measured nitrogen species (TDN and DIN). In this study, we present a nanofiltration (NF) pretreatment to increase the accuracy and precision of DON measurements by selectively concentrating DON while passing through DIN species in water samples to reduce the DIN/TDN ratio. Three commercial NF membranes (NF90, NF270 and HL) were tested. The rejection efficiency of finished water from the Yangshupu drinking water treatment plant (YDWTP) is 12%, 31%, 8% of nitrate, 26%, 28%, 23% of ammonia, 77%, 78%, 82% of DOC (dissolved organic carbon), and 83%, 87% 88% of UV(254) for HL, NF90 and NF270, respectively. NF270 showed the best performance due to its high DIN permeability and DON retention (∼80%). NF270 can lower the DIN/TDN ratio from around 1 to less than 0.6 mg N/mg N, and satisfactory DOC recoveries as well as DON measurements in synthetic water samples were obtained using optimized operating parameters. Compared to the available dialysis pretreatment method, the NF pretreatment method shows a similar improved performance for DON measurement for aqueous samples and can save at least 20 h of operating time and a large volume of deionized water, which is beneficial for laboratories involved in DON analysis. DON concentration in the effluent of different treatment processes at the YDWTP and the SDWTP (Shijiuyang DWTP) in China were investigated with and without NF pretreatment; the results showed that DON with NF pretreatment and DOC both gradually decreased after each water treatment process at both treatment plants. The advanced water treatment line, including biological pretreatment, clarification, sand filtration, ozone-BAC processes at the SDWTP showed greater efficiency of DON

  7. Rare-event simulation for tandem queues: A simple and efficient importance sampling scheme

    NARCIS (Netherlands)

    Miretskiy, D.; Scheinhardt, W.; Mandjes, M.

    2009-01-01

    This paper focuses on estimating the rare event of overflow in the downstream queue of a tandem Jackson queue, relying on importance sampling. It is known that in this setting ‘traditional’ state-independent schemes perform poorly. More sophisticated state-dependent schemes yield asymptotic

  8. [Modeling and simulation activities to design sampling scheme for population pharmacokinetic study on amlodipine].

    Science.gov (United States)

    Zuo, Xiao-Cong; Yuan, Hong; Zhang, Bi-Kui; Ng, Chee M; Barrett, Jeff S; Yang, Guo-Ping; Huang, Zhi-Jun; Pei, Qi; Guo, Ren; Zhou, Ya-Nan; Jing, Ning-Ning; Di, Wu

    2012-07-01

    Reasonable sampling scheme is the important basis for establishing reliable population pharmacokinetic model. It is an effective method for estimation of population pharmacokinetic parameters with sparse data to perform population pharmacokinetic analysis using the nonlinear mixed-effects models. We designed the sampling scheme for amlodipine based on D-optimal sampling strategy and Bayesian estimation method. First, optimized sample scenarios were designed using WinPOPT software according to the aim, dosage regimen and visit schedule of the clinical study protocol, and the amlodipine population model reported by Rohatagi et al. Second, we created a NONMEM-formatted dataset (n = 400) for each sample scenario via Monte Carlo simulation. Third, the estimation of amlodipine pharmacokinetic parameters (clearance (CL/F), volume (V/F) and Ka) was based on the simulation results. All modeling and simulation exercises were conducted with NONMEM version 7.2. Finally, the accuracy and precision of the estimated parameters were evaluated using the mean prediction error (MPE) and the mean absolute error (MAPE), respectively. Among the 6 schemes, schemes 6 and 3 have good accuracy and precision. MPE is 0.1% for scheme 6 and -0.6% for scheme 3, respectively. MAPE is 0.7% for both schemes. There is no significant difference in MPE and MAPE of volume among them. Therefore, we select scheme 3 as the final sample scenario because it has good accuracy and precision and less sample points. This research aims to provide scientific and effective sampling scheme for population pharmacokinetic (PK) study of amlodipine in patients with renal impairment and hypertension, provide a scientific method for an optimum design in clinical population PK/PD (pharmacodynamics) research.

  9. Using remote sensing images to design optimal field sampling schemes

    CSIR Research Space (South Africa)

    Debba, Pravesh

    2008-08-01

    Full Text Available in the alteration zones was chosen as the target mineral. Sampling points are distributed more intensely in regions of high probable alunite as classified by both SAM and SFF, thus representing the purest of pixels. This method leads to an efficient distribution...

  10. [Magnetic micro-/nano-materials: functionalization and their applications in pretreatment for food samples].

    Science.gov (United States)

    Gao, Qiang; Feng, Yuqi

    2014-10-01

    Magnetic solid phase extraction technique, based on functional magnetic materials, is currently a hot topic in the separation and analysis of complex samples. This paper reviews the reported methods for the functionalization of magnetic micro-/nano-materials, such as sur- face grafting organic groups, coating carbon or inorganic oxide, grafting or coating polymer, being loaded to the surface or pores of supports, being introduced into the skeleton of sup- ports, and physically co-mixing methods. Moreover, we briefly introduce the applications of the functional magnetic micro-/nano-materials in pretreatment for food samples.

  11. [Sample pretreatment for the measurement of phthalate esters in complex matrices].

    Science.gov (United States)

    Liang, Jing; Zhuang, Wan'e; Lin, Fang; Yao, Wensong

    2014-11-01

    Sample pretreatment methods for the measurement of phthalate esters (PAEs) by gas chromatography-mass spectrometry (GC-MS) in various complex matrices, including sediment, soil, suspended particle matter, urban surface dust, Sinonovacula Constricta, cosmet- ic, leather, plastic and coastal/estuarine seawater, were proposed. The pretreatment which was appropriate for GC-MS detection was focused on the investigation and optimization of oper- ating parameters for the extraction and purification, such as the extraction solvent, the eluant and the adsorbent of solid phase extraction. The results of the study of pretreatment for various complex matrices showed that methylene chloride was the best solvent for the ultrasonic extraction when solid-liquid extraction was used; silica gel was the economical and practical adsorbent for solid-phase extraction for purification; C18 was the most commonly adsorbent for preconcentration of PAE in coastal/estuarine seawater sample; the mixed solution of n-hexane and ethyl acetate with a certain proportion was the suitable SPE eluent. Under the optimized conditions, the spiked recoveries were above 58% and the relative standard deviations (RSDs) were less than 10.5% (n = 6). The detection limits (DL, 3σ) were in the range of 0.3 μg/kg (dibutyl phthalate)--5.2 μg/kg ( diisononyl phthalate) for sediment, and 6 ng/L (dipropyl phthalate)--67 ng/L (diisodecyl phthalate) for costal/estuarine seawater. The pretreatment meth- od for various complex matrices is prominent for the measurement of the 16 PAEs with GC-MS.

  12. Sampling scheme for pyrethroids on multiple surfaces on commercial aircrafts

    Science.gov (United States)

    MOHAN, KRISHNAN R.; WEISEL, CLIFFORD P.

    2015-01-01

    A wipe sampler for the collection of permethrin from soft and hard surfaces has been developed for use in aircraft. “Disinsection” or application of pesticides, predominantly pyrethrods, inside commercial aircraft is routinely required by some countries and is done on an as-needed basis by airlines resulting in potential pesticide dermal and inhalation exposures to the crew and passengers. A wipe method using filter paper and water was evaluated for both soft and hard aircraft surfaces. Permethrin was analyzed by GC/MS after its ultrasonication extraction from the sampling medium into hexane and volume reduction. Recoveries, based on spraying known levels of permethrin, were 80–100% from table trays, seat handles and rugs; and 40–50% from seat cushions. The wipe sampler is easy to use, requires minimum training, is compatible with the regulations on what can be brought through security for use on commercial aircraft, and readily adaptable for use in residential and other settings. PMID:19756041

  13. A new sampling scheme for tropical forest monitoring using satellite imagery

    Science.gov (United States)

    Frederic Achard; Tim Richards; Javier Gallego

    2000-01-01

    At the global level, a sampling scheme for tropical forest change assessment, using high resolution satellite images, has been defined using sampling units independent of any particular satellite sensor. For this purpose, a sampling frame has been chosen a hexagonal tessellation of 3,600 km².

  14. Evaluation of alternative macroinvertebrate sampling techniques for use in a new tropical freshwater bioassessment scheme

    OpenAIRE

    Moore, Isabel Eleanor; Murphy, Kevin Joseph

    2015-01-01

    Aim: The study aimed to determine the effectiveness of benthic macroinvertebrate dredge net sampling procedures as an alternative method to kick net sampling in tropical freshwater systems, specifically as an evaluation of sampling methods used in the Zambian Invertebrate Scoring System (ZISS) river bioassessment scheme. Tropical freshwater ecosystems are sometimes dangerous or inaccessible to sampling teams using traditional kick-sampling methods, so identifying an alternative procedure that...

  15. On-Chip integration of sample pretreatment and Multiplex polymerase chain reaction (PCR) for DNA analysis

    DEFF Research Database (Denmark)

    Brivio, Monica; Snakenborg, Detlef; Søgaard, E.

    2008-01-01

    In this paper we present a modular lab-on-a-chip system for integrated sample pre-treatment (PT) by magnetophoresis and DNA amplification by polymerase chain reaction (PCR). It consists of a polymer-based microfluidic chip mounted on a custom-made thermocycler (Figure 1) and includes a simple...... and efficient method for switching the liquid flow between the PT and PCR chamber. Purification of human genomic DNA from EDTA-treated blood and multiplex PCR were successfully carried out on-chip using the developed lab-on-a-chip system....

  16. Analysis of bromate in drinking water using liquid chromatography-tandem mass spectrometry without sample pretreatment.

    Science.gov (United States)

    Kosaka, Koji; Asami, Mari; Takei, Kanako; Akiba, Michihiro

    2011-01-01

    An analytical method for determining bromate in drinking water was developed using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The (18)O-enriched bromate was used as an internal standard. The limit of quantification (LOQ) of bromate was 0.2 µg/L. The peak of bromate was separated from those of coexisting ions (i.e., chloride, nitrate and sulfate). The relative and absolute recoveries of bromate in two drinking water samples and in a synthesized ion solution (100 mg/L chloride, 10 mg N/L nitrate, and 100 mg/L sulfate) were 99-105 and 94-105%, respectively. Bromate concentrations in 11 drinking water samples determined by LC-MS/MS were water without sample pretreatment.

  17. [Short gel method for pretreatment of protein samples with high concentration of detergent].

    Science.gov (United States)

    Ma, Shouzhi; Zhang, Tao; Zhai, Linhui; Sun, Yulin; Xu, Ping; Zhao, Xiaohang

    2014-09-01

    In proteomic research, to improve protein solubility of membrane proteins and nuclear proteins, buffers containing high concentration of detergent, such as 4% SDS, were widely used. However, high concentration of detergent might severely interfere with the downstream proteomic analysis, including protein quantitation and trypsin digestion. To improve the proteomic compatibility of buffers with high concentration of detergent, we used short gel method to pretreat buffers containing detergent. Protein samples were first separated by a short (2-2.5 mm) SDS-PAGE electrophoresis, and proteins were quantitated by comparing with bovine serum albumin standards via optical density analysis. The gel was then cut and peptides were recovered using in-gel digestion. The quantitative linearity range of this method was 1 to 8 μg. The quantitation was accurate and reproducible. After short gel analysis, recovered peptides generated high mass spectrometry signals. In conclusion, short gel method eliminated the interference of high concentration detergent in the proteomics analysis, and it was suitable for protein samples' pretreatment, and was worth to apply in proteomic research.

  18. Extractive electrospray ionization mass spectrometry toward in situ analysis without sample pretreatment.

    Science.gov (United States)

    Li, Ming; Hu, Bin; Li, Jianqiang; Chen, Rong; Zhang, Xie; Chen, Huanwen

    2009-09-15

    A homemade novel nanoextractive electrospray ionization (nanoEESI) source has been characterized for in situ mass spectrometric analysis of ambient samples without sample pretreatment. The primary ions generated using a nanospray emitter interact with the neutral sample plume created by manually nebulizing liquid samples, allowing production of the analyte ions in the spatial cross section of the nanoEESI source. The performance of nanoEESI is experimentally investigated by coupling the nanoEESI source to a commercial LTQ mass spectrometer for rapid analysis of various ambient samples using positive/negative ion detection modes. Compounds of interest in actual samples such as aerosol drug preparations, beverages, milk suspensions, farmland water, and groundwater were unambiguously detected using tandem nanoEESI ion trap mass spectrometry. The limit of detection was low picogram per milliliter levels for the compounds tested. Acceptable relative standard deviation (RSD) values (5-10%) were obtained for direct measurement of analytes in complex matrixes, providing linear dynamic signal responses using manual sample introduction. A single sample analysis was completed within 1.2 s. Requiring no sheath gas for either primary ion production or neutral sample introduction, the nanoEESI has advantages including readiness for miniaturization and integration, simple maintenance, easy operation, and low cost. The experimental data demonstrate that the nanoEESI is a promising tool for high-throughput, sensitive, quantitative, in situ analysis of ambient complex samples, showing potential applications for in situ analysis in multiple disciplines including but not limited to pharmaceutical analysis, food quality control, pesticides residue detection, and homeland security.

  19. Designing sampling schemes for effect monitoring of nutrient leaching from agricultural soils.

    NARCIS (Netherlands)

    Brus, D.J.; Noij, I.G.A.M.

    2008-01-01

    A general methodology for designing sampling schemes for monitoring is illustrated with a case study aimed at estimating the temporal change of the spatial mean P concentration in the topsoil of an agricultural field after implementation of the remediation measure. A before-after control-impact

  20. Multistatic Array Sampling Scheme for Fast Near-Field Image Reconstruction

    Science.gov (United States)

    2016-01-01

    subjects in high foot traffic environments, such as mass transit systems, stadiums , and large public events. In order to handle a potentially constant...in [4], however, a key difference in this work is the sampling scheme. As will be discussed, the presented design samples the scene on a uniform phase...elementary unit of the design is the Boundary Array (BA) [6], a sparse array topology first used in ultrasonic sensing. This design employs four linear

  1. Development of a particle-settling tolerant transmission Raman scheme for analysis of suspension samples.

    Science.gov (United States)

    Shin, Kayeong; Duy, Pham Khac; Park, Sijun; Woo, Young-Ah; Chung, Hoeil

    2014-06-07

    We have demonstrated a simple and effective strategy, the so-called axial illumination scheme, that is able to obtain representative Raman spectra of suspension samples with minimal influence from internal particle settling. In a partially settled suspension sample, since particle concentrations at given points throughout the sample differ, the acquisition of Raman spectra representative of the entire sample composition is critically important for accurate quantitative analysis. The proposed scheme used axially irradiated laser radiation in the same or opposite direction of settling, thus allowing laser photons to migrate through the settling-induced particle-density gradient formed in the suspension and to widely interact with particles regardless of their settled locations. Therefore, transmitted Raman signals gathered opposite to the illumination could be more representative of the overall suspension composition even with partial settling. In this study, the performance of axial illumination schemes (TB (Top-to-Bottom) and BT (Bottom-to-Top) illumination) was evaluated for the determination of the aceclofenac (a non-steroidal anti-inflammatory drug) concentration in suspensions. Although the spectral features exhibited minute variations during settling, settling did not significantly degrade the accuracy of the concentration determination, thereby indicating effective acquisition of settling-tolerant Raman spectra. In addition, the characteristics of photon migration in a partially settled suspension sample were studied using a simulation based on Monte-Carlo method.

  2. Synthesis and application of imidazolium-based ionic liquids as extraction solvent for pretreatment of triazole fungicides in water samples.

    Science.gov (United States)

    Yang, Jiale; Fan, Chen; Kong, Dandan; Tang, Gang; Zhang, Wenbing; Dong, Hongqiang; Liang, You; Wang, Deng; Cao, Yongsong

    2018-02-01

    Five novel ionic liquids (ILs), 1,3-dibutylimidazolium bromide [BBMIm][Br], 1-pentyl-3-butylimidazolium bromide [BPMIm][Br], 1-hexyl-3-butylimidazolium bromide [BHMIm][Br], 1,1'-(butane-1,4-diyl)bis(3-butylimidazolium) bromide [C 4 (BMIm) 2 ][Br 2 ], and 1,1'-(butane-1,4-diyl)bis(3-methylimidazolium) bromide [C 4 (MIm) 2 ][Br 2 ], were prepared and used in situ to react with bis(trifluoromethane)sulfonamide lithium salt to extract the myclobutanil, tebuconazole, cyproconazole, and prothioconazole from water samples. The results showed that mono-cationic ILs had much better recovery than dicationic ILs, and mono-imidazolium IL bearing butyl groups at N-1 and N-3 sites had the best recovery. When the length of the alkyl substituent group was more than four carbons at N-3 site, the recovery decreased with increase of alkyl chain length of 1-butylimidazolium IL. The extraction efficiency order of triazoles from high to low was [BBMIm][Br], [BPMIm][Br], [BHMIm][Br], [BMIm][Br] (1-butyl-3-methylimidazolium bromide), [C 4 (BMIm) 2 ]Br 2 , [C 4 (MIm) 2 ]Br 2 . An in situ ionic liquid dispersive liquid-liquid microextraction combined with ultrasmall superparamagnetic Fe 3 O 4 was established as a pretreatment method for enrichment of triazole fungicides in water samples by using the synthetic [BBMIm][Br] as the cationic IL and used to detect analytes followed by high-performance liquid chromatography. Under the optimized conditions, the proposed method showed a good linearity within a range of 5-250 μg L -1 , with the determination coefficient (r 2 ) varying from 0.998 to 0.999. High mean enrichment factors were achieved ranging from 187 to 323, and the recoveries of the target analytes from real water samples at spiking levels of 10.0, 20.0, and 50.0 μg L -1 were between 70.1% and 115.0%. The limits of detection for the analytes were 0.74-1.44 μg L -1 , and the intra-day relative standard deviations varied from 5.23% to 8.65%. The proposed method can be further applied

  3. A novel pretreatment approach for fast determination of organochlorine pesticides in biotic samples.

    Science.gov (United States)

    Yang, Dai B; Wang, Ya Q; Liu, Wen X; Tao, Shu

    2008-05-01

    Recent studies have focused on enantiomeric behaviors of chiral organochlorine pesticides (OCPs) in biotic matrix because they provide insights into the biotransformation processes of chiral OCPs. In the present paper, a double in-line column chromatographic method was developed to effectively remove the lipid impurity in different biotic samples for clean-up of OCPs. After an initial Soxhlet extraction of OCPs from the biotic samples by a mixture of acetone and dichloromethane (DCM), dimethyl sulfoxide (DMSO) was directly added to the extract, and low boiling point solvents (acetone and DCM) were then evaporated. OCPs remained in DMSO were eluted via column 1 filled with silicon gel, and subsequently passed through column 2 packed with 15% deactivated florisil. This novel method was characterized by significant time and solvent savings. The recovery rates of alpha-HCH (hexachlorocyclohexane), beta-HCH, gamma-HCH and delta-HCH were 78.5+/-3.1%, 72.4+/-7.7%, 72+/-4.0% and 70.0+/-8.7%, respectively, and 92.5+/-3.8%, 79.7+/-6.7% and 83.4+/-6.5% for 1,1-dichloro-2-(2-chlorophenyl)-2-(4- chlorophenyl) ethylene (o,p'-DDE), 1,1-dichloro-2-(2-chlorophenyl)-2-(4-chloro phenyl)ethane (o,p'-DDD) and 1,1,1-trichloro-2-(2-chlorophenyl)-2-(4-chlorophenyl) ethane (o,p'-DDT), separately. In addition, the separation efficiencies of the target compounds by both achiral and chiral gas chromatographic columns were satisfactory using the established method. Therefore, the double in-line column chromatography was a useful alternative method for pretreatment of OCPs in different biotic samples.

  4. Comparison of rainfall sampling schemes using a calibrated stochastic rainfall generator

    Energy Technology Data Exchange (ETDEWEB)

    Welles, E.

    1994-12-31

    Accurate rainfall measurements are critical to river flow predictions. Areal and gauge rainfall measurements create different descriptions of the same storms. The purpose of this study is to characterize those differences. A stochastic rainfall generator was calibrated using an automatic search algorithm. Statistics describing several rainfall characteristics of interest were used in the error function. The calibrated model was then used to generate storms which were exhaustively sampled, sparsely sampled and sampled areally with 4 x 4 km grids. The sparsely sampled rainfall was also kriged to 4 x 4 km blocks. The differences between the four schemes were characterized by comparing statistics computed from each of the sampling methods. The possibility of predicting areal statistics from gauge statistics was explored. It was found that areally measured storms appeared to move more slowly, appeared larger, appeared less intense and have shallower intensity gradients.

  5. Evaluation of alternative macroinvertebrate sampling techniques for use in a new tropical freshwater bioassessment scheme

    Directory of Open Access Journals (Sweden)

    Isabel Eleanor Moore

    2015-06-01

    Full Text Available Aim: The study aimed to determine the effectiveness of benthic macroinvertebrate dredge net sampling procedures as an alternative method to kick net sampling in tropical freshwater systems, specifically as an evaluation of sampling methods used in the Zambian Invertebrate Scoring System (ZISS river bioassessment scheme. Tropical freshwater ecosystems are sometimes dangerous or inaccessible to sampling teams using traditional kick-sampling methods, so identifying an alternative procedure that produces similar results is necessary in order to collect data from a wide variety of habitats.MethodsBoth kick and dredge nets were used to collect macroinvertebrate samples at 16 riverine sites in Zambia, ranging from backwaters and floodplain lagoons to fast flowing streams and rivers. The data were used to calculate ZISS, diversity (S: number of taxa present, and Average Score Per Taxon (ASPT scores per site, using the two sampling methods to compare their sampling effectiveness. Environmental parameters, namely pH, conductivity, underwater photosynthetically active radiation (PAR, temperature, alkalinity, flow, and altitude, were also recorded and used in statistical analysis. Invertebrate communities present at the sample sites were determined using multivariate procedures.ResultsAnalysis of the invertebrate community and environmental data suggested that the testing exercise was undertaken in four distinct macroinvertebrate community types, supporting at least two quite different macroinvertebrate assemblages, and showing significant differences in habitat conditions. Significant correlations were found for all three bioassessment score variables between results acquired using the two methods, with dredge-sampling normally producing lower scores than did the kick net procedures. Linear regression models were produced in order to correct each biological variable score collected by a dredge net to a score similar to that of one collected by kick net

  6. Optimization of PMAxx pretreatment to distinguish between human norovirus with intact and altered capsids in shellfish and sewage samples.

    Science.gov (United States)

    Randazzo, Walter; Khezri, Mohammad; Ollivier, Joanna; Le Guyader, Françoise S; Rodríguez-Díaz, Jesús; Aznar, Rosa; Sánchez, Gloria

    2018-02-02

    Shellfish contamination by human noroviruses (HuNoVs) is a serious health and economic problem. Recently an ISO procedure based on RT-qPCR for the quantitative detection of HuNoVs in shellfish has been issued, but these procedures cannot discriminate between inactivated and potentially infectious viruses. The aim of the present study was to optimize a pretreatment using PMAxx to better discriminate between intact and heat-treated HuNoVs in shellfish and sewage. To this end, the optimal conditions (30min incubation with 100μM of PMAxx and 0.5% of Triton, and double photoactivation) were applied to mussels, oysters and cockles artificially inoculated with thermally-inactivated (99°C for 5min) HuNoV GI and GII. This pretreatment reduced the signal of thermally-inactivated HuNoV GI in cockles and HuNoV GII in mussels by >3 log. Additionally, this pretreatment reduced the signal of thermally-inactivated HuNoV GI and GII between 1 and 1.5 log in oysters. Thermal inactivation of HuNoV GI and GII in PBS, sewage and bioaccumulated oysters was also evaluated by the PMAxx-Triton pretreatment. Results showed significant differences between reductions observed in the control and PMAxx-treated samples in PBS following treatment at 72 and 95°C for 15min. In sewage, the RT-qPCR signal of HuNoV GI was completely removed by the PMAxx pretreatment after heating at 72 and 95°C, while the RT-qPCR signal for HuNoV GII was completely eliminated only at 95°C. Finally, the PMAxx-Triton pretreatment was applied to naturally contaminated sewage and oysters, resulting in most of the HuNoV genomes quantified in sewage and oyster samples (12 out of 17) corresponding to undamaged capsids. Although this procedure may still overestimate infectivity, the PMAxx-Triton pretreatment represents a step forward to better interpret the quantification of intact HuNoVs in complex matrices, such as sewage and shellfish, and it could certainly be included in the procedures based on RT-qPCR. Copyright

  7. Sample pretreatment in the determination of specific alpha emitters in drinking water using [Ba+Fe]-coprecipitation method.

    Science.gov (United States)

    Suarez-Navarro, J A; Pujol, Ll; Suarez-Navarro, M J

    2015-02-01

    The [Ba+Fe]-coprecipitation method is applied to measure gross alpha activity for radiological examination of drinking water in the laboratory. This method collects all the alpha-emitting radionuclides of interest (natural alpha emitters and transuranium elements) in a precipitate on a filter. This paper describes an investigation of sample pretreatment of the precipitate collected by the [Ba+Fe]-coprecipitation method for gross alpha activity determination. The aim of this preliminary work is to be a starting point to develop simple and rapid radiochemical procedures for specific alpha emitters (polonium, radium, thorium, uranium, plutonium and americium), in contrast to the sophisticated, expensive and time-consuming alpha spectrometry method. The sample pretreatment aspects considered include quantitative [Ba+Fe]-coprecipitation, two methods for precipitate treatment (leaching and complete destruction of the filter), and the determination of the alpha-emitting proportions present in the barium sulfate precipitate and acid solution obtained after precipitate treatment. Furthermore, a radiochemical procedure for (226)Ra determination was performed and finally, the sample pretreatment proposed in this work was summarized. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. The effect of sampling scheme in the survey of atmospheric deposition of heavy metals in Albania by using moss biomonitoring.

    Science.gov (United States)

    Qarri, Flora; Lazo, Pranvera; Bekteshi, Lirim; Stafilov, Trajce; Frontasyeva, Marina; Harmens, Harry

    2015-02-01

    The atmospheric deposition of heavy metals in Albania was investigated by using a carpet-forming moss species (Hypnum cupressiforme) as bioindicator. Sampling was done in the dry seasons of autumn 2010 and summer 2011. Two different sampling schemes are discussed in this paper: a random sampling scheme with 62 sampling sites distributed over the whole territory of Albania and systematic sampling scheme with 44 sampling sites distributed over the same territory. Unwashed, dried samples were totally digested by using microwave digestion, and the concentrations of metal elements were determined by inductively coupled plasma atomic emission spectroscopy (ICP-AES) and AAS (Cd and As). Twelve elements, such as conservative and trace elements (Al and Fe and As, Cd, Cr, Cu, Ni, Mn, Pb, V, Zn, and Li), were measured in moss samples. Li as typical lithogenic element is also included. The results reflect local emission points. The median concentrations and statistical parameters of elements were discussed by comparing two sampling schemes. The results of both sampling schemes are compared with the results of other European countries. Different levels of the contamination valuated by the respective contamination factor (CF) of each element are obtained for both sampling schemes, while the local emitters identified like iron-chromium metallurgy and cement industry, oil refinery, mining industry, and transport have been the same for both sampling schemes. In addition, the natural sources, from the accumulation of these metals in mosses caused by metal-enriched soil, associated with wind blowing soils were pointed as another possibility of local emitting factors.

  9. Comparative Study of the Effect of Sample Pretreatment and Extraction on the Determination of Flavonoids from Lemon (Citrus limon)

    Science.gov (United States)

    Ledesma-Escobar, Carlos A.; Priego-Capote, Feliciano; Luque de Castro, María D.

    2016-01-01

    Background Flavonoids have shown to exert multiple beneficial effects on human health, being also appreciated by both food and pharmaceutical industries. Citrus fruits are a key source of flavonoids, thus promoting studies to obtain them. Characteristics of these studies are the discrepancies among sample pretreatments and among extraction methods, and also the scant number of comparative studies developed so far. Objective Evaluate the effect of both the sample pretreatment and the extraction method on the profile of flavonoids isolated from lemon. Results Extracts from fresh, lyophilized and air-dried samples obtained by shaking extraction (SE), ultrasound-assisted extraction (USAE), microwave-assisted extraction (MAE) and superheated liquid extraction (SHLE) were analyzed by LC–QTOF MS/MS, and 32 flavonoids were tentatively identified using MS/MS information. ANOVA applied to the data from fresh and dehydrated samples and from extraction by the different methods revealed that 26 and 32 flavonoids, respectively, were significant (p≤0.01). The pairwise comparison (Tukey HSD; p≤0.01) showed that lyophilized samples are more different from fresh samples than from air-dried samples; also, principal component analysis (PCA) showed a clear discrimination among sample pretreatment strategies and suggested that such differences are mainly created by the abundance of major flavonoids. On the other hand, pairwise comparison of extraction methods revealed that USAE and MAE provided quite similar extracts, being SHLE extracts different from the other two. In this case, PCA showed a clear discrimination among extraction methods, and their position in the scores plot suggests a lower abundance of flavonoids in the extracts from SHLE. In the two PCA the loadings plots revealed a trend to forming groups according to flavonoid aglycones. Conclusions The present study shows clear discrimination caused by both sample pretreatments and extraction methods. Under the studied

  10. Comparative Study of the Effect of Sample Pretreatment and Extraction on the Determination of Flavonoids from Lemon (Citrus limon).

    Science.gov (United States)

    Ledesma-Escobar, Carlos A; Priego-Capote, Feliciano; Luque de Castro, María D

    2016-01-01

    Flavonoids have shown to exert multiple beneficial effects on human health, being also appreciated by both food and pharmaceutical industries. Citrus fruits are a key source of flavonoids, thus promoting studies to obtain them. Characteristics of these studies are the discrepancies among sample pretreatments and among extraction methods, and also the scant number of comparative studies developed so far. Evaluate the effect of both the sample pretreatment and the extraction method on the profile of flavonoids isolated from lemon. Extracts from fresh, lyophilized and air-dried samples obtained by shaking extraction (SE), ultrasound-assisted extraction (USAE), microwave-assisted extraction (MAE) and superheated liquid extraction (SHLE) were analyzed by LC-QTOF MS/MS, and 32 flavonoids were tentatively identified using MS/MS information. ANOVA applied to the data from fresh and dehydrated samples and from extraction by the different methods revealed that 26 and 32 flavonoids, respectively, were significant (p≤0.01). The pairwise comparison (Tukey HSD; p≤0.01) showed that lyophilized samples are more different from fresh samples than from air-dried samples; also, principal component analysis (PCA) showed a clear discrimination among sample pretreatment strategies and suggested that such differences are mainly created by the abundance of major flavonoids. On the other hand, pairwise comparison of extraction methods revealed that USAE and MAE provided quite similar extracts, being SHLE extracts different from the other two. In this case, PCA showed a clear discrimination among extraction methods, and their position in the scores plot suggests a lower abundance of flavonoids in the extracts from SHLE. In the two PCA the loadings plots revealed a trend to forming groups according to flavonoid aglycones. The present study shows clear discrimination caused by both sample pretreatments and extraction methods. Under the studied conditions, liophilization provides extracts

  11. Comparative Study of the Effect of Sample Pretreatment and Extraction on the Determination of Flavonoids from Lemon (Citrus limon.

    Directory of Open Access Journals (Sweden)

    Carlos A Ledesma-Escobar

    Full Text Available Flavonoids have shown to exert multiple beneficial effects on human health, being also appreciated by both food and pharmaceutical industries. Citrus fruits are a key source of flavonoids, thus promoting studies to obtain them. Characteristics of these studies are the discrepancies among sample pretreatments and among extraction methods, and also the scant number of comparative studies developed so far.Evaluate the effect of both the sample pretreatment and the extraction method on the profile of flavonoids isolated from lemon.Extracts from fresh, lyophilized and air-dried samples obtained by shaking extraction (SE, ultrasound-assisted extraction (USAE, microwave-assisted extraction (MAE and superheated liquid extraction (SHLE were analyzed by LC-QTOF MS/MS, and 32 flavonoids were tentatively identified using MS/MS information. ANOVA applied to the data from fresh and dehydrated samples and from extraction by the different methods revealed that 26 and 32 flavonoids, respectively, were significant (p≤0.01. The pairwise comparison (Tukey HSD; p≤0.01 showed that lyophilized samples are more different from fresh samples than from air-dried samples; also, principal component analysis (PCA showed a clear discrimination among sample pretreatment strategies and suggested that such differences are mainly created by the abundance of major flavonoids. On the other hand, pairwise comparison of extraction methods revealed that USAE and MAE provided quite similar extracts, being SHLE extracts different from the other two. In this case, PCA showed a clear discrimination among extraction methods, and their position in the scores plot suggests a lower abundance of flavonoids in the extracts from SHLE. In the two PCA the loadings plots revealed a trend to forming groups according to flavonoid aglycones.The present study shows clear discrimination caused by both sample pretreatments and extraction methods. Under the studied conditions, liophilization provides

  12. A coupled well-balanced and random sampling scheme for computing bubble oscillations*

    Directory of Open Access Journals (Sweden)

    Jung Jonathan

    2012-04-01

    Full Text Available We propose a finite volume scheme to study the oscillations of a spherical bubble of gas in a liquid phase. Spherical symmetry implies a geometric source term in the Euler equations. Our scheme satisfies the well-balanced property. It is based on the VFRoe approach. In order to avoid spurious pressure oscillations, the well-balanced approach is coupled with an ALE (Arbitrary Lagrangian Eulerian technique at the interface and a random sampling remap. Nous proposons un schéma de volumes finis pour étudier les oscillations d’une bulle sphérique de gaz dans l’eau. La symétrie sphérique fait apparaitre un terme source géométrique dans les équations d’Euler. Notre schéma est basé sur une approche VFRoe et préserve les états stationnaires. Pour éviter les oscillations de pression, l’approche well-balanced est couplée avec une approche ALE (Arbitrary Lagrangian Eulerian, et une étape de projection basée sur un échantillonage aléatoire.

  13. An Extended Multilocus Sequence Typing (MLST Scheme for Rapid Direct Typing of Leptospira from Clinical Samples.

    Directory of Open Access Journals (Sweden)

    Sabrina Weiss

    2016-09-01

    Full Text Available Rapid typing of Leptospira is currently impaired by requiring time consuming culture of leptospires. The objective of this study was to develop an assay that provides multilocus sequence typing (MLST data direct from patient specimens while minimising costs for subsequent sequencing.An existing PCR based MLST scheme was modified by designing nested primers including anchors for facilitated subsequent sequencing. The assay was applied to various specimen types from patients diagnosed with leptospirosis between 2014 and 2015 in the United Kingdom (UK and the Lao Peoples Democratic Republic (Lao PDR. Of 44 clinical samples (23 serum, 6 whole blood, 3 buffy coat, 12 urine PCR positive for pathogenic Leptospira spp. at least one allele was amplified in 22 samples (50% and used for phylogenetic inference. Full allelic profiles were obtained from ten specimens, representing all sample types (23%. No nonspecific amplicons were observed in any of the samples. Of twelve PCR positive urine specimens three gave full allelic profiles (25% and two a partial profile. Phylogenetic analysis allowed for species assignment. The predominant species detected was L. interrogans (10/14 and 7/8 from UK and Lao PDR, respectively. All other species were detected in samples from only one country (Lao PDR: L. borgpetersenii [1/8]; UK: L. kirschneri [1/14], L. santarosai [1/14], L. weilii [2/14].Typing information of pathogenic Leptospira spp. was obtained directly from a variety of clinical samples using a modified MLST assay. This assay negates the need for time-consuming culture of Leptospira prior to typing and will be of use both in surveillance, as single alleles enable species determination, and outbreaks for the rapid identification of clusters.

  14. A Novel Pretreatment-Free Duplex Chamber Digital PCR Detection System for the Absolute Quantitation of GMO Samples.

    Science.gov (United States)

    Zhu, Pengyu; Wang, Chenguang; Huang, Kunlun; Luo, Yunbo; Xu, Wentao

    2016-03-18

    Digital polymerase chain reaction (PCR) has developed rapidly since it was first reported in the 1990s. However, pretreatments are often required during preparation for digital PCR, which can increase operation error. The single-plex amplification of both the target and reference genes may cause uncertainties due to the different reaction volumes and the matrix effect. In the current study, a quantitative detection system based on the pretreatment-free duplex chamber digital PCR was developed. The dynamic range, limit of quantitation (LOQ), sensitivity and specificity were evaluated taking the GA21 event as the experimental object. Moreover, to determine the factors that may influence the stability of the duplex system, we evaluated whether the pretreatments, the primary and secondary structures of the probes and the SNP effect influence the detection. The results showed that the LOQ was 0.5% and the sensitivity was 0.1%. We also found that genome digestion and single nucleotide polymorphism (SNP) sites affect the detection results, whereas the unspecific hybridization within different probes had little side effect. This indicated that the detection system was suited for both chamber-based and droplet-based digital PCR. In conclusion, we have provided a simple and flexible way of achieving absolute quantitation for genetically modified organism (GMO) genome samples using commercial digital PCR detection systems.

  15. A Novel Pretreatment-Free Duplex Chamber Digital PCR Detection System for the Absolute Quantitation of GMO Samples

    Directory of Open Access Journals (Sweden)

    Pengyu Zhu

    2016-03-01

    Full Text Available Digital polymerase chain reaction (PCR has developed rapidly since it was first reported in the 1990s. However, pretreatments are often required during preparation for digital PCR, which can increase operation error. The single-plex amplification of both the target and reference genes may cause uncertainties due to the different reaction volumes and the matrix effect. In the current study, a quantitative detection system based on the pretreatment-free duplex chamber digital PCR was developed. The dynamic range, limit of quantitation (LOQ, sensitivity and specificity were evaluated taking the GA21 event as the experimental object. Moreover, to determine the factors that may influence the stability of the duplex system, we evaluated whether the pretreatments, the primary and secondary structures of the probes and the SNP effect influence the detection. The results showed that the LOQ was 0.5% and the sensitivity was 0.1%. We also found that genome digestion and single nucleotide polymorphism (SNP sites affect the detection results, whereas the unspecific hybridization within different probes had little side effect. This indicated that the detection system was suited for both chamber-based and droplet-based digital PCR. In conclusion, we have provided a simple and flexible way of achieving absolute quantitation for genetically modified organism (GMO genome samples using commercial digital PCR detection systems.

  16. Effect of sample pre-treatment on the determination of steroid esters in hair of bovine calves.

    Science.gov (United States)

    Aqai, P; Stolker, A A M; Lasaroms, J J P

    2009-11-13

    The effect of three sample pre-treatment steps, washing, cutting and grinding on the determination of steroid esters in hair is studied. The study is performed by using hair samples obtained after pour-on application of steroid esters to bovine calves. After sample pre-treatment the hair is treated with a mild reducing agent [tris(2-carboxyethyl)phosphine hydrochloride] to extract the steroid esters. After a solid-phase extraction clean-up step the extracts are analysed by using liquid chromatography combined with triple-quadrupole mass spectrometric detection. For the washing step the use of non-organic washing solvents like (warm) water and a solution of 0.1% sodium dodecyl phosphate and organic solutions containing different percentages of methanol are tested. By using the non-organic solvents and the organic solvents with a percentage of methanol hair. Cutting the hair samples increases the analyte recoveries of incurred steroid esters by 20% compared to the non-cut hair. The analyte recoveries of cut hair samples are about 60-80% that of ground hair samples. The obtained surface expansion of hair samples by grinding proves to be necessary in order to achieve the highest possible analyte yields. Finally the use of pressurised liquid extraction (PLE) for the extraction of steroid esters from plain (no washing, cutting or grinding) hair is investigated. The first results show lower (up to 40%) extraction recoveries in comparison with the classical solvent extraction procedures. If the limit of detection requirement is met, PLE may be an alternative for extracting large numbers of hair samples due to the short sample treatment procedure involved.

  17. THE EFFECT OF SAMPLE PRETREATMENT ON THE RESULT OF CHEMICAL FRACTIONATION OF CHROMIUM IN RIVER SEDIMENTS CONTAMINATED WITH TANNERY SEWAGE

    Directory of Open Access Journals (Sweden)

    Marzena Anna Trojanowska

    2017-02-01

    Full Text Available Chemical fractionation is generally used to assess the mobility and bioavailability of heavy metals present in solid environmental samples. Although fractionation results are determined by sample pretreatment methods, authors of publications usually disregard this issue and study exclusively the distribution of metals among biogeochemical phases. The aim of this work was to assess the effect of preparation of samples on results of chemical fractionation of chromium deposited in river sediments contaminated with tannery wastes. Attention was focused on the evaluation of the effect of drying and grinding of sediments. Fractionation was carried out according to the procedure of Tessier which makes it possible to divide total chromium content into five fractions of different mobility and bioavailability (ion-exchange, carbonate, oxide, organic and residual fractions. It has been found that sediment grinding is not an appropriate method of sample pretreatment, because it significantly changes fractionation results and thus it can lead to an incorrect assessment of mobility and bioavailability of chromium deposited in river sediments. Drying of the sediments at a range of 20–105 °C does not change the original distribution of chromium among biogeochemical phases.

  18. A whole-path importance-sampling scheme for Feynman path integral calculations of absolute partition functions and free energies.

    Science.gov (United States)

    Mielke, Steven L; Truhlar, Donald G

    2016-01-21

    Using Feynman path integrals, a molecular partition function can be written as a double integral with the inner integral involving all closed paths centered at a given molecular configuration, and the outer integral involving all possible molecular configurations. In previous work employing Monte Carlo methods to evaluate such partition functions, we presented schemes for importance sampling and stratification in the molecular configurations that constitute the path centroids, but we relied on free-particle paths for sampling the path integrals. At low temperatures, the path sampling is expensive because the paths can travel far from the centroid configuration. We now present a scheme for importance sampling of whole Feynman paths based on harmonic information from an instantaneous normal mode calculation at the centroid configuration, which we refer to as harmonically guided whole-path importance sampling (WPIS). We obtain paths conforming to our chosen importance function by rejection sampling from a distribution of free-particle paths. Sample calculations on CH4 demonstrate that at a temperature of 200 K, about 99.9% of the free-particle paths can be rejected without integration, and at 300 K, about 98% can be rejected. We also show that it is typically possible to reduce the overhead associated with the WPIS scheme by sampling the paths using a significantly lower-order path discretization than that which is needed to converge the partition function.

  19. Unified Importance Sampling Schemes for Efficient Simulation of Outage Capacity over Generalized Fading Channels

    KAUST Repository

    Rached, Nadhir B.

    2015-11-13

    The outage capacity (OC) is among the most important performance metrics of communication systems operating over fading channels. Of interest in the present paper is the evaluation of the OC at the output of the Equal Gain Combining (EGC) and the Maximum Ratio Combining (MRC) receivers. In this case, it can be seen that this problem turns out to be that of computing the Cumulative Distribution Function (CDF) for the sum of independent random variables. Since finding a closedform expression for the CDF of the sum distribution is out of reach for a wide class of commonly used distributions, methods based on Monte Carlo (MC) simulations take pride of price. In order to allow for the estimation of the operating range of small outage probabilities, it is of paramount importance to develop fast and efficient estimation methods as naive Monte Carlo (MC) simulations would require high computational complexity. In this line, we propose in this work two unified, yet efficient, hazard rate twisting Importance Sampling (IS) based approaches that efficiently estimate the OC of MRC or EGC diversity techniques over generalized independent fading channels. The first estimator is shown to possess the asymptotic optimality criterion and applies for arbitrary fading models, whereas the second one achieves the well-desired bounded relative error property for the majority of the well-known fading variates. Moreover, the second estimator is shown to achieve the asymptotic optimality property under the particular Log-normal environment. Some selected simulation results are finally provided in order to illustrate the substantial computational gain achieved by the proposed IS schemes over naive MC simulations.

  20. Pre-treatment with heat facilitates detection of antigen of Dirofilaria immitis in canine samples.

    Science.gov (United States)

    Little, Susan E; Munzing, Candace; Heise, Steph R; Allen, Kelly E; Starkey, Lindsay A; Johnson, Eileen M; Meinkoth, James; Reichard, Mason V

    2014-06-16

    Diagnosis of Dirofilaria immitis infection in dogs is largely dependent on detection of antigen in canine serum, plasma, or whole blood, but antigen may be bound in immune complexes and thus not detected. To develop a model for antigen blocking, we mixed serum from a microfilaremic, antigen-positive dog with that of a hypergammaglobulinemic dog not currently infected with D. immitis and converted the positive sample to antigen-negative; detection of antigen was restored when the mixed sample was heat-treated, presumably due to disruption of antigen/antibody complexes. A blood sample was also evaluated from a dog that was microfilaremic and for which microfilariae were identified as D. immitis by morphologic examination. Antigen of D. immitis was not detected in this sample prior to heating but the sample was strongly positive after heat treatment of whole blood. Taken together, our results indicate that blood samples from some dogs may contain factors that inhibit detection of antigen of D. immitis, and that heat treatment of these samples prior to testing could improve the sensitivity of these assays in some patients. Copyright © 2014 Elsevier B.V. All rights reserved.

  1. Sampling scheme on genetic structure of tree species in fragmented tropical dry forest: an evaluation from landscape genetic simulations

    Science.gov (United States)

    Yessica Rico; Marie-Stephanie. Samain

    2017-01-01

    Investigating how genetic variation is distributed across the landscape is fundamental to inform forest conservation and restoration. Detecting spatial genetic discontinuities has value for defining management units, germplasm collection, and target sites for reforestation; however, inappropriate sampling schemes can misidentify patterns of genetic structure....

  2. Comparison of Dilution, Filtration, and Microwave Digestion Sample Pretreatments in Elemental Profiling of Wine by ICP-MS

    Directory of Open Access Journals (Sweden)

    Joshua Godshaw

    2017-09-01

    Full Text Available Wine elemental composition varies by cultivar, geographic origin, viticultural and enological practices, and is often used for authenticity validation. Elemental analysis of wine by Inductively Coupled Plasma Mass Spectrometry (ICP-MS is challenging due to the potential for non-spectral interferences and plasma instability arising from organic matrix components. Sample preparation mitigates these interferences, however, conflicting recommendations of best practices in ICP-MS analysis of wine have been reported. This study compared direct dilution, microwave-assisted acid digestion, and two filtration sample pretreatments, acidification prior to filtration and filtration followed by acidification, in elemental profiling of one white and three red table wines by ICP-MS. Of 43 monitored isotopes, 37 varied by sample preparation method, with significantly higher results of 17 isotopes in the microwave-digested samples. Both filtration treatments resulted in lower results for 11 isotopes compared to the other methods. Finally, isotope dilution determination of copper based on natural abundances and the 63Cu:65Cu instrument response ratio agreed with external calibration and confirmed a significant sample preparation effect. Overall, microwave digestion did not compare favorably, and direct dilution was found to provide the best compromise between ease of use and result accuracy and precision, although all preparation strategies were able to differentiate the wines.

  3. Peer groups splitting in Croatian EQA scheme: a trade-off between homogeneity and sample size number.

    Science.gov (United States)

    Vlašić Tanasković, Jelena; Coucke, Wim; Leniček Krleža, Jasna; Vuković Rodriguez, Jadranka

    2017-03-01

    Laboratory evaluation through external quality assessment (EQA) schemes is often performed as 'peer group' comparison under the assumption that matrix effects influence the comparisons between results of different methods, for analytes where no commutable materials with reference value assignment are available. With EQA schemes that are not large but have many available instruments and reagent options for same analyte, homogenous peer groups must be created with adequate number of results to enable satisfactory statistical evaluation. We proposed a multivariate analysis of variance (MANOVA)-based test to evaluate heterogeneity of peer groups within the Croatian EQA biochemistry scheme and identify groups where further splitting might improve laboratory evaluation. EQA biochemistry results were divided according to instruments used per analyte and the MANOVA test was used to verify statistically significant differences between subgroups. The number of samples was determined by sample size calculation ensuring a power of 90% and allowing the false flagging rate to increase not more than 5%. When statistically significant differences between subgroups were found, clear improvement of laboratory evaluation was assessed before splitting groups. After evaluating 29 peer groups, we found strong evidence for further splitting of six groups. Overall improvement of 6% reported results were observed, with the percentage being as high as 27.4% for one particular method. Defining maximal allowable differences between subgroups based on flagging rate change, followed by sample size planning and MANOVA, identifies heterogeneous peer groups where further splitting improves laboratory evaluation and enables continuous monitoring for peer group heterogeneity within EQA schemes.

  4. The determination of nitrite by a graphene quantum dot fluorescence quenching method without sample pretreatment.

    Science.gov (United States)

    Jin, Li; Wang, Ying; Liu, Fangtong; Yu, Shihua; Gao, Yan; Zhang, Jianpo

    2017-10-25

    A method for quantitative analysis of nitrite was achieved based on fluorescence quenching of graphene quantum dots. To obtain reliable results, the effects of pH, temperature and reaction time on this fluorescence quenching system were studied. Under optimized conditions, decrease in fluorescence intensity of graphene quantum dots (F0 /F) showed a good linear relationship with nitrite concentration between 0.007692-0.38406 mmol/L and 0.03623-0.13043 μmol/L; the limits of detection were 9.8 μmol/L and 5.4 nmol/L, respectively. Variable temperature experiments, UV absorption spectra and thermodynamic calculations were used to determine the quenching mechanism, and indicated that it was an exothermic, spontaneous dynamic quenching process. This method was used to analyse urine samples, and showed that it could be applied to analyse biological samples. Copyright © 2017 John Wiley & Sons, Ltd.

  5. Study on different pre-treatment procedures for metal determination in Orujo spirit samples by ICP-AES

    Energy Technology Data Exchange (ETDEWEB)

    Barciela, Julia; Vilar, Manuela; Garcia-Martin, Sagrario [Departamento de Quimica Analitica, Nutricion y Bromatologia, Facultad de Ciencias, Universidad de Santiago de Compostela, Campus de Lugo, 27002 Lugo (Spain); Pena, Rosa M. [Departamento de Quimica Analitica, Nutricion y Bromatologia, Facultad de Ciencias, Universidad de Santiago de Compostela, Campus de Lugo, 27002 Lugo (Spain)], E-mail: qarosa@lugo.usc.es; Herrero, Carlos [Departamento de Quimica Analitica, Nutricion y Bromatologia, Facultad de Ciencias, Universidad de Santiago de Compostela, Campus de Lugo, 27002 Lugo (Spain)], E-mail: cherrero@lugo.usc.es

    2008-10-17

    In this work several pre-treatment methods were studied for metal (Na, K, Mg, Cu and Ca) determination in Orujo spirit samples using inductively coupled plasma atomic emission spectrometry (ICP-AES). Dilution, digestion, evaporation, and cryogenic desolvatation techniques were comparatively evaluated. Because of their analytical characteristics, digestion and evaporation with nitrogen current were found to be appropriate procedures for the determination of metals in alcoholic spirit samples. Yet, if simplicity and application time are to be considered, the latter-evaporation in a water bath with a nitrogen current-stands out as the optimum procedure for any further determinations in Orujo samples by ICP-AES. Low detection levels and wide linear ranges (sufficient to determine these metals in the samples studied) were achieved for each metal. The recoveries (in the 97.5-100.5% range) and the precision (R.S.D. lower than 5.6%) obtained were also satisfactory. The selected procedure was applied to determine the content of metals in 80 representative Galician Orujo spirit samples with and without a Certified Brand of Origin (CBO) which had been produced using different distillation systems. The metal concentrations ranged between 0.37 and 79.7 mg L{sup -1} for Na,

  6. Simple and rapid UV spectrophotometry of caffeine in tea coupled with sample pre-treatment using a cartridge column filled with polyvinylpolypyrrolidone (PVPP).

    Science.gov (United States)

    Yamauchi, Yuji; Nakamura, Akiko; Kohno, Iho; Kitai, Miki; Hatanaka, Kirara; Tanimoto, Tsuyoshi

    2008-02-01

    We have applied a sample pre-treatment method with a cartridge column filled with polyvinylpolypyrrolidone (PVPP) to the effective removal of polyphenols and simple UV spectrophotometry of caffeine in tea. The absorption maximum length (lambda(max)) for caffeine was close to those for tea catechins in aqueous 1% acetic acid; therefore, the UV spectrum of a non-treated green tea sample had a large absorption wave. In contrast, the absorbance of the green tea sample was gradually reduced by PVPP cartridge treatment using PVPP from 0 to 50 mg, and was nearly constant using a pre-treatment cartridge with more than 100 mg PVPP, because tea catechins were effectively removed and caffeine was mostly recovered from a green tea sample by means of PVPP cartridge treatment. The PVPP pre-treatment cartridge also removed polyphenols successfully from oolong and black tea samples. Comparison with conventional HPLC analysis indicated that the present pre-treatment method with a PVPP cartridge was useful for the simple and selective UV spectrophotometric determination of caffeine in green, oolong and black tea samples.

  7. Geochemical sampling scheme optimization on mine wastes based on hyperspectral data

    CSIR Research Space (South Africa)

    Zhao, T

    2008-07-01

    Full Text Available Spatial sampling optimization is an important issue for both geo-chemists and geo-statisticians. Many spatial sampling optimization methods have been previously developed. In this paper, we present a spatial simulated annealing method is presented...

  8. 40 CFR 761.316 - Interpreting PCB concentration measurements resulting from this sampling scheme.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Interpreting PCB concentration... § 761.79(b)(3) § 761.316 Interpreting PCB concentration measurements resulting from this sampling... concentration measured in that sample. If the sample surface concentration is not equal to or lower than the...

  9. An optimum allocation sampling based feature extraction scheme for distinguishing seizure and seizure-free EEG signals.

    Science.gov (United States)

    Taran, Sachin; Bajaj, Varun; Siuly, Siuly

    2017-12-01

    Epileptic seizure is the common neurological disorder, which is generally identified by electroencephalogram (EEG) signals. In this paper, a new feature extraction methodology based on optimum allocation sampling (OAS) and Teager energy operator (TEO) is proposed for detection of seizure EEG signals. The OAS scheme selects the finite length homogeneous sequence from non-homogeneous recorded EEG signal. The trend of selected sequence by OAS is still non-linear, which is analyzed by non-linear operator TEO. The TEO convert non-linear but homogenous EEG sequence into amplitude-frequency modulated (AM-FM) components. The statistical measures of AM-FM components used as input features to least squares support vector machine classifier for classification of seizure and seizure-free EEG signals. The proposed methodology is evaluated on a benchmark epileptic seizure EEG database. The experimental results demonstrate that the proposed scheme has capability to effectively distinguish seizure and seizure-free EEG signals.

  10. Simplifying sample pretreatment: application of dried blood spot (DBS) method to blood samples, including postmortem, for UHPLC-MS/MS analysis of drugs of abuse.

    Science.gov (United States)

    Odoardi, Sara; Anzillotti, Luca; Strano-Rossi, Sabina

    2014-10-01

    The complexity of biological matrices, such as blood, requires the development of suitably selective and reliable sample pretreatment procedures prior to their instrumental analysis. A method has been developed for the analysis of drugs of abuse and their metabolites from different chemical classes (opiates, methadone, fentanyl and analogues, cocaine, amphetamines and amphetamine-like substances, ketamine, LSD) in human blood using dried blood spot (DBS) and subsequent UHPLC-MS/MS analysis. DBS extraction required only 100μL of sample, added with the internal standards and then three droplets (30μL each) of this solution were spotted on the card, let dry for 1h, punched and extracted with methanol with 0.1% of formic acid. The supernatant was evaporated and the residue was then reconstituted in 100μL of water with 0.1% of formic acid and injected in the UHPLC-MS/MS system. The method was validated considering the following parameters: LOD and LOQ, linearity, precision, accuracy, matrix effect and dilution integrity. LODs were 0.05-1ng/mL and LOQs were 0.2-2ng/mL. The method showed satisfactory linearity for all substances, with determination coefficients always higher than 0.99. Intra and inter day precision, accuracy, matrix effect and dilution integrity were acceptable for all the studied substances. The addition of internal standards before DBS extraction and the deposition of a fixed volume of blood on the filter cards ensured the accurate quantification of the analytes. The validated method was then applied to authentic postmortem blood samples. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  11. Investigation of elastomer rheological properties based on multi-circuit scheme synthesis of the experimental sample substitution

    Science.gov (United States)

    Tatevosyan, A. A.; Tatevosyan, A. S.

    2017-08-01

    The paper is to describe the method for studying the rheological characteristics of elastomers using a multi-circuit electrical scheme of substitution, the synthesis of which is performed on the basis of experimental data obtained during the mechanical relaxation of loaded test samples at a fixed value of the relative deformation. In analyzing the fast and slow stages of the stress relaxation process in elastomer test specimens with significantly different viscoelastic properties, it is established that the number of relaxation mechanisms in the decomposition of the time dependence into exponentials does not exceed 6 (six).

  12. Validation of a sample pretreatment protocol to convert a drug-sensitive into a drug-tolerant anti-infliximab antibody immunoassay.

    Science.gov (United States)

    Van Stappen, Thomas; Brouwers, Els; Vermeire, Séverine; Gils, Ann

    2017-02-01

    A meta-analysis revealed that up to 51% of patients treated with infliximab develop anti-drug Abs (ADA) which are associated with loss of response. Detection of ADA is strongly influenced by assay technique since drug-sensitive ADA assays are not able to detect ADA in the presence of drug and therefore underestimate ADA development. In addition, the lack of a calibrator antibody that can be used in a drug-sensitive and drug-tolerant assay hampers an adequate comparison among different assays. Here we present a sample pretreatment protocol to convert the bridging assay, originally developed as a drug-sensitive assay, into a drug-tolerant assay, allowing use of the same assay and calibrator antibody MA-IFX10F9. Using the sample pretreatment protocol, the bridging assay detects antibodies towards infliximab in samples containing up to 5-fold infliximab over anti-infliximab. Analysis of consecutive serum samples from infliximab treated patients revealed that the drug-tolerant assay detects ADA development up to 40 weeks earlier compared to the drug-sensitive assay. In conclusion, the sample pretreatment protocol can be implemented in various assay formats and allows determination of ADA in the presence of drug, providing the possibility for early treatment optimization. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  13. Continuous quality control of the blood sampling procedure using a structured observation scheme

    DEFF Research Database (Denmark)

    Seemann, Tine Lindberg; Nybo, Mads

    2016-01-01

    blood drawings by 39 phlebotomists were observed in the pilot study, while 84 blood drawings by 34 phlebotomists were observed in the follow-up study. In the pilot study, the three major error items were hand hygiene (42% error), mixing of samples (22%), and order of draw (21%). Minor significant...

  14. Simple and efficient importance sampling scheme for a tandem queue with server slow-down

    NARCIS (Netherlands)

    Miretskiy, D.I.; Scheinhardt, W.R.W.; Mandjes, M.R.H.

    2008-01-01

    This paper considers importance sampling as a tool for rare-event simulation. The system at hand is a so-called tandem queue with slow-down, which essentially means that the server of the first queue (or: upstream queue) switches to a lower speed when the second queue (downstream queue) exceeds some

  15. A practical scheme for quantum oblivious transfer and private database sampling

    Science.gov (United States)

    Fattal, David; Fiorentino, Marco; Beausoleil, Raymond G.

    2008-08-01

    We present an unconditionally secure Oblivious Transfer protocol relying on two rounds of entanglement-free quantum communication. When played honestly, the protocol only requires the ability to measure a single qubit in a fixed basis, and to perform a coherent bit-flip (Pauli X) operation. We present a generalization to a "Private Data Sampling" protocol, where a player (Bob) can obtain a random sample of fixed size from a classical database of size N, while the database owner (Alice) remains oblivious as to which bits were accessed. The protocol is efficient in the sense that the communication complexity per query scales at most linearly with the size of the database. It does not violate Lo's "no-go" theorem for one-sided two-party secure computation, since a given joint input by Alice and Bob can result in randomly different protocol outcomes. Finally it could be used to implement a practical bit string commitment protocol, among other applications.

  16. A Control Chart for Gamma Distributed Variables Using Repetitive Sampling Scheme

    OpenAIRE

    Nasrullah Khan; Muhammad Aslam; Liaquat Ahmad; Chi-Hyuck Jun

    2017-01-01

    In this manuscript, a control chart is designed when the quality characteristic of interest follows a gamma distribution using repetitive sampling. The Wilson-Hilferty approximation is used to transform the gamma distributed characteristic to a normal random variable. Two pairs of control limits are established and their control constants are determined by considering the specified in-control average run length (ARL). The out-of-control ARL is derived when the process is shifted in terms of t...

  17. Designing a sampling scheme to reveal correlations between weeds and soil properties at multiple spatial scales.

    Science.gov (United States)

    Metcalfe, H; Milne, A E; Webster, R; Lark, R M; Murdoch, A J; Storkey, J

    2016-02-01

    Weeds tend to aggregate in patches within fields, and there is evidence that this is partly owing to variation in soil properties. Because the processes driving soil heterogeneity operate at various scales, the strength of the relations between soil properties and weed density would also be expected to be scale-dependent. Quantifying these effects of scale on weed patch dynamics is essential to guide the design of discrete sampling protocols for mapping weed distribution. We developed a general method that uses novel within-field nested sampling and residual maximum-likelihood (reml) estimation to explore scale-dependent relations between weeds and soil properties. We validated the method using a case study of Alopecurus myosuroides in winter wheat. Using reml, we partitioned the variance and covariance into scale-specific components and estimated the correlations between the weed counts and soil properties at each scale. We used variograms to quantify the spatial structure in the data and to map variables by kriging. Our methodology successfully captured the effect of scale on a number of edaphic drivers of weed patchiness. The overall Pearson correlations between A. myosuroides and soil organic matter and clay content were weak and masked the stronger correlations at >50 m. Knowing how the variance was partitioned across the spatial scales, we optimised the sampling design to focus sampling effort at those scales that contributed most to the total variance. The methods have the potential to guide patch spraying of weeds by identifying areas of the field that are vulnerable to weed establishment.

  18. Multistatic Array Sampling Scheme for Fast Near-Field Image Reconstruction

    Science.gov (United States)

    2016-01-01

    frequency response of the scene is sampled on a regularly spaced two-dimensional grid. Following collection of all measurements, the image can be...images were formed with 18-26.5 GHz stimulus , using 160 frequency points. The 3D images were realized with 21 depth slices, spaced by 0.015m. Fig. 7...McMakin, and T. E. Hall, “Three-dimensional millimeter-wave imaging for concealed weapon detection,” IEEE Trans- actions on Microwave Theory and

  19. A Control Chart for Gamma Distributed Variables Using Repetitive Sampling Scheme

    Directory of Open Access Journals (Sweden)

    Nasrullah Khan

    2017-03-01

    Full Text Available In this manuscript, a control chart is designed when the quality characteristic of interest follows a gamma distribution using repetitive sampling. The Wilson-Hilferty approximation is used to transform the gamma distributed characteristic to a normal random variable. Two pairs of control limits are established and their control constants are determined by considering the specified in-control average run length (ARL. The out-of-control ARL is derived when the process is shifted in terms of the scale parameter of the Gamma distribution. The ARLs are presented for various values of the shape parameter according to process shift parameters. A simulated example is given to illustrate the proposed control chart.

  20. Fuzzy logic scheme for tip-sample distance control for a low cost near field optical microscope

    Directory of Open Access Journals (Sweden)

    J.A. Márquez

    2013-12-01

    Full Text Available The control of the distance between the surface and the tip-sample of a Scanning Near Field Optical Microscope (SNOM is essential for a reliable surface mapping. The control algorithm should be able to maintain the system in a constant distance between the tip and the surface. In this system, nanometric adjustments should be made in order to sense topographies at the same scale with an appropriate resolution. These kinds of devices varies its properties through short periods of time, and it is required a control algorithm capable of handle these changes. In this work a fuzzy logic control scheme is proposed in order to manage the changes the device might have through the time, and to counter the effects of the non-linearity as well. Two inputs are used to program the rules inside the fuzzy logic controller, the difference between the reference signal and the sample signal (error, and the speed in which it decreases or increases. A lock-in amplifier is used as data acquisition hardware to sample the high frequency signals used to produce the tuning fork oscillations. Once these variables are read the control algorithm calculate a voltage output to move the piezoelectric device, approaching or removing the tip-probe from the sample analyzed.

  1. Biomass pretreatment

    Science.gov (United States)

    Hennessey, Susan Marie; Friend, Julie; Elander, Richard T; Tucker, III, Melvin P

    2013-05-21

    A method is provided for producing an improved pretreated biomass product for use in saccharification followed by fermentation to produce a target chemical that includes removal of saccharification and or fermentation inhibitors from the pretreated biomass product. Specifically, the pretreated biomass product derived from using the present method has fewer inhibitors of saccharification and/or fermentation without a loss in sugar content.

  2. Use of alkaline or enzymatic sample pretreatment prior to characterization of gold nanoparticles in animal tissue by single-particle ICPMS

    DEFF Research Database (Denmark)

    Löschner, Katrin; Brabrand, Myung Suk Jung; Sloth, Jens Jørgen

    2014-01-01

    , not much is known about the applicability of spICPMS for determination of NPs in complex matrices such as biological tissues. In the present study, alkaline and enzymatic treatments were applied to solubilize spleen samples from rats, which had been administered 60-nm gold nanoparticles (Au......NPs) intravenously. The results showed that similar size distributions of AuNPs were obtained independent of the sample preparation method used. Furthermore, the quantitative results for AuNP mass concentration obtained with spICPMS following alkaline sample pretreatment coincided with results for total gold...... concentration obtained by conventional ICPMS analysis of acid-digested tissue. The recovery of AuNPs from enzymatically digested tissue, however, was approximately four times lower. Spiking experiments of blank spleen samples with AuNPs showed that the lower recovery was caused by an inferior transport...

  3. A computer-aided diagnosis (CAD) scheme for pretreatment prediction of pathological response to neoadjuvant therapy using dynamic contrast-enhanced MRI texture features.

    Science.gov (United States)

    Giannini, Valentina; Mazzetti, Simone; Marmo, Agnese; Montemurro, Filippo; Regge, Daniele; Martincich, Laura

    2017-08-01

    To assess whether a computer-aided, diagnosis (CAD) system can predict pathological Complete Response (pCR) to neoadjuvant chemotherapy (NAC) prior to treatment using texture features. Response to treatment of 44 patients was defined according to the histopatology of resected tumour and extracted axillary nodes in two ways: (a) pCR+ (Smith's Grade = 5) vs pCR- (Smith's Grade < 5); (b) pCRN+ (pCR+ and absence of residual lymph node metastases) vs pCRN - . A CAD system was developed to: (i) segment the breasts; (ii) register the DCE-MRI sequence; (iii) detect the lesion and (iv) extract 27 3D texture features. The role of individual texture features, multiparametric models and Bayesian classifiers in predicting patients' response to NAC were evaluated. A cross-validated Bayesian classifier fed with 6 features was able to predict pCR with a specificity of 72% and a sensitivity of 67%. Conversely, 2 features were used by the Bayesian classifier to predict pCRN, obtaining a sensitivity of 69% and a specificity of 61%. A CAD scheme, that extracts texture features from an automatically segmented 3D mask of the tumour, could predict pathological response to NAC. Additional research should be performed to validate these promising results on a larger cohort of patients and using different classification strategies. Advances in knowledge: This is the first study assessing the role of an automatic CAD system in predicting the pathological response to NAC before treatment. Fully automatic methods represent the backbone of standardized analysis and may help in timely managing patients candidate to NAC.

  4. Toxoplasma gondii and pre-treatment protocols for polymerase chain reaction analysis of milk samples: a field trial in sheep from Southern Italy

    Directory of Open Access Journals (Sweden)

    Alice Vismarra

    2017-02-01

    Full Text Available Toxoplasmosis is a zoonotic disease caused by the protozoan Toxoplasma gondii. Ingestion of raw milk has been suggested as a risk for transmission to humans. Here the authors evaluated pre-treatment protocols for DNA extraction on T. gondii tachyzoite-spiked sheep milk with the aim of identifying the method that resulted in the most rapid and reliable polymerase chain reaction (PCR positivity. This protocol was then used to analyse milk samples from sheep of three different farms in Southern Italy, including real time PCR for DNA quantification and PCR-restriction fragment length polymorphism for genotyping. The pre-treatment protocol using ethylenediaminetetraacetic acid and Tris-HCl to remove casein gave the best results in the least amount of time compared to the others on spiked milk samples. One sample of 21 collected from sheep farms was positive on one-step PCR, real time PCR and resulted in a Type I genotype at one locus (SAG3. Milk usually contains a low number of tachyzoites and this could be a limiting factor for molecular identification. Our preliminary data has evaluated a rapid, cost-effective and sensitive protocol to treat milk before DNA extraction. The results of the present study also confirm the possibility of T. gondii transmission through consumption of raw milk and its unpasteurised derivatives.

  5. Investigating effects of sample pretreatment on protein stability using size-exclusion chromatography and high-resolution continuum source atomic absorption spectrometry.

    Science.gov (United States)

    Rakow, Tobias; El Deeb, Sami; Hahne, Thomas; El-Hady, Deia Abd; AlBishri, Hassan M; Wätzig, Hermann

    2014-09-01

    In this study, size-exclusion chromatography and high-resolution atomic absorption spectrometry methods have been developed and evaluated to test the stability of proteins during sample pretreatment. This especially includes different storage conditions but also adsorption before or even during the chromatographic process. For the development of the size exclusion method, a Biosep S3000 5 μm column was used for investigating a series of representative model proteins, namely bovine serum albumin, ovalbumin, monoclonal immunoglobulin G antibody, and myoglobin. Ambient temperature storage was found to be harmful to all model proteins, whereas short-term storage up to 14 days could be done in an ordinary refrigerator. Freezing the protein solutions was always complicated and had to be evaluated for each protein in the corresponding solvent. To keep the proteins in their native state a gentle freezing temperature should be chosen, hence liquid nitrogen should be avoided. Furthermore, a high-resolution continuum source atomic absorption spectrometry method was developed to observe the adsorption of proteins on container material and chromatographic columns. Adsorption to any container led to a sample loss and lowered the recovery rates. During the pretreatment and high-performance size-exclusion chromatography, adsorption caused sample losses of up to 33%. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Systolic MOLLI T1 mapping with heart-rate-dependent pulse sequence sampling scheme is feasible in patients with atrial fibrillation.

    Science.gov (United States)

    Zhao, Lei; Li, Songnan; Ma, Xiaohai; Greiser, Andreas; Zhang, Tianjing; An, Jing; Bai, Rong; Dong, Jianzeng; Fan, Zhanming

    2016-03-15

    T1 mapping enables assessment of myocardial characteristics. As the most common type of arrhythmia, atrial fibrillation (AF) is often accompanied by a variety of cardiac pathologies, whereby the irregular and usually rapid ventricle rate of AF may cause inaccurate T1 estimation due to mis-triggering and inadequate magnetization recovery. We hypothesized that systolic T1 mapping with a heart-rate-dependent (HRD) pulse sequence scheme may overcome this issue. 30 patients with AF and 13 healthy volunteers were enrolled and underwent cardiovascular magnetic resonance (CMR) at 3 T. CMR was repeated for 3 patients after electric cardioversion and for 2 volunteers after lowering heart rate (HR). A Modified Look-Locker Inversion Recovery (MOLLI) sequence was acquired before and 15 min after administration of 0.1 mmol/kg gadopentetate dimeglumine. For AF patients, both the fixed 5(3)3/4(1)3(1)2 and the HRD sampling scheme were performed at diastole and systole, respectively. The HRD pulse sequence sampling scheme was 5(n)3/4(n)3(n)2, where n was determined by the heart rate to ensure adequate magnetization recovery. Image quality of T1 maps was assessed. T1 times were measured in myocardium and blood. Extracellular volume fraction (ECV) was calculated. In volunteers with repeated T1 mapping, the myocardial native T1 and ECV generated from the 1st fixed sampling scheme were smaller than from the 1st HRD and 2nd fixed sampling scheme. In healthy volunteers, the overall native T1 times and ECV of the left ventricle (LV) in diastolic T1 maps were greater than in systolic T1 maps (P T1 times and ECV generated from the fixed sampling scheme were smaller than in the 1st and 2nd HRD sampling scheme (all P T1 maps with artifact were found in diastole than in systole (P T1 times and ECV of the left ventricle (LV) in diastolic T1 maps were greater than systolic T1 maps, either with fixed or HRD sampling scheme (all P T1 mapping with heart-rate-dependent pulse sequence scheme

  7. An integrated sample pretreatment platform for quantitative N-glycoproteome analysis with combination of on-line glycopeptide enrichment, deglycosylation and dimethyl labeling

    Energy Technology Data Exchange (ETDEWEB)

    Weng, Yejing; Qu, Yanyan; Jiang, Hao; Wu, Qi [National Chromatographic Research and Analysis Center, Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); University of the Chinese Academy of Sciences, Beijing 100039 (China); Zhang, Lihua, E-mail: lihuazhang@dicp.ac.cn [National Chromatographic Research and Analysis Center, Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); Yuan, Huiming [National Chromatographic Research and Analysis Center, Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); Zhou, Yuan [National Chromatographic Research and Analysis Center, Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); University of the Chinese Academy of Sciences, Beijing 100039 (China); Zhang, Xiaodan; Zhang, Yukui [National Chromatographic Research and Analysis Center, Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China)

    2014-06-23

    Highlights: • An integrated platform for quantitative N-glycoproteome analysis was established. • On-line enrichment, deglycosylation and labeling could be achieved within 160 min. • A N{sub 2}-assisted interface was applied to improve the compatibility of the platform. • The platform exhibited improved quantification accuracy, precision and throughput. - Abstract: Relative quantification of N-glycoproteomes shows great promise for the discovery of candidate biomarkers and therapeutic targets. The traditional protocol for quantitative analysis of glycoproteomes is usually off-line performed, and suffers from long sample preparation time, and the risk of sample loss or contamination due to manual manipulation. In this study, a novel integrated sample preparation platform for quantitative N-glycoproteome analysis was established, with combination of online N-glycopeptide capture by a HILIC column, sample buffer exchange by a N{sub 2}-assisted HILIC–RPLC interface, deglycosylation by a hydrophilic PNGase F immobilized enzymatic reactor (hIMER) and solid dimethyl labeling on a C18 precolumn. To evaluate the performance of such a platform, two equal aliquots of immunoglobulin G (IgG) digests were sequentially pretreated, followed by MALDI-TOF MS analysis. The signal intensity ratio of heavy/light (H/L) labeled deglycosylated peptides with the equal aliquots was 1.00 (RSD = 6.2%, n = 3), much better than those obtained by the offline protocol, with H/L ratio as 0.76 (RSD = 11.6%, n = 3). Additionally, the total on-line sample preparation time was greatly shortened to 160 min, much faster than that of offline approach (24 h). Furthermore, such an integrated pretreatment platform was successfully applied to analyze the two kinds of hepatocarcinoma ascites syngeneic cell lines with high (Hca-F) and low (Hca-P) lymph node metastasis rates. For H/L labeled Hca-P lysates with the equal aliquots, 99.6% of log 2 ratios (H/L) of quantified glycopeptides ranged from −1

  8. Solar UV-Assisted Pretreatment of River Water Samples for the Voltammetric Monitoring of Nickel and Cobalt Ultratraces

    Directory of Open Access Journals (Sweden)

    Gelaneh Woldemichael

    2014-01-01

    Full Text Available The application of solar UV radiation as sample digestion method is reported. The method is employed in adsorptive stripping voltammetric determination of nickel and cobalt in river water samples. The river water samples were collected from downstream of Warnow River (Germany and acidified to pH of 2±0.2 by addition of ultrapure 65% HNO3. Furthermore, 3.4 mgL−1 ultrapure hydrogen peroxide solution was added to the samples as photochemical reaction initiator. The samples were transferred to UV-A transparent polyethylene terephthalate bottles and put in the sunshine for UV irradiation for six and 12 hours at a UV-A intensity of 3.90 mW/m2. The comparison of the concentration values showed that, 6 hours of solar UV irradiation at 3.90 mW/m2 UV-A intensity is not sufficient to complete the digestion process though it yields much better results than the undigested original sample. However, 12 hours of solar UV-A irradiation under similar conditions is almost as effective as a 30 W artificial UV lamp (254 nm and can be applied to the digestion of dissolved organic carbon in trace nickel (II and cobalt (II analysis in natural waters such as river water, lake waters, and well waters.

  9. Heparin removal by ecteola-cellulose pre-treatment enables the use of plasma samples for accurate measurement of anti-Yellow fever virus neutralizing antibodies.

    Science.gov (United States)

    Campi-Azevedo, Ana Carolina; Peruhype-Magalhães, Vanessa; Coelho-Dos-Reis, Jordana Grazziela; Costa-Pereira, Christiane; Yamamura, Anna Yoshida; Lima, Sheila Maria Barbosa de; Simões, Marisol; Campos, Fernanda Magalhães Freire; de Castro Zacche Tonini, Aline; Lemos, Elenice Moreira; Brum, Ricardo Cristiano; de Noronha, Tatiana Guimarães; Freire, Marcos Silva; Maia, Maria de Lourdes Sousa; Camacho, Luiz Antônio Bastos; Rios, Maria; Chancey, Caren; Romano, Alessandro; Domingues, Carla Magda; Teixeira-Carvalho, Andréa; Martins-Filho, Olindo Assis

    2017-09-01

    Technological innovations in vaccinology have recently contributed to bring about novel insights for the vaccine-induced immune response. While the current protocols that use peripheral blood samples may provide abundant data, a range of distinct components of whole blood samples are required and the different anticoagulant systems employed may impair some properties of the biological sample and interfere with functional assays. Although the interference of heparin in functional assays for viral neutralizing antibodies such as the functional plaque-reduction neutralization test (PRNT), considered the gold-standard method to assess and monitor the protective immunity induced by the Yellow fever virus (YFV) vaccine, has been well characterized, the development of pre-analytical treatments is still required for the establishment of optimized protocols. The present study intended to optimize and evaluate the performance of pre-analytical treatment of heparin-collected blood samples with ecteola-cellulose (ECT) to provide accurate measurement of anti-YFV neutralizing antibodies, by PRNT. The study was designed in three steps, including: I. Problem statement; II. Pre-analytical steps; III. Analytical steps. Data confirmed the interference of heparin on PRNT reactivity in a dose-responsive fashion. Distinct sets of conditions for ECT pre-treatment were tested to optimize the heparin removal. The optimized protocol was pre-validated to determine the effectiveness of heparin plasma:ECT treatment to restore the PRNT titers as compared to serum samples. The validation and comparative performance was carried out by using a large range of serum vs heparin plasma:ECT 1:2 paired samples obtained from unvaccinated and 17DD-YFV primary vaccinated subjects. Altogether, the findings support the use of heparin plasma:ECT samples for accurate measurement of anti-YFV neutralizing antibodies. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Improvements of the Vis-NIRS Model in the Prediction of Soil Organic Matter Content Using Spectral Pretreatments, Sample Selection, and Wavelength Optimization

    Science.gov (United States)

    Lin, Z. D.; Wang, Y. B.; Wang, R. J.; Wang, L. S.; Lu, C. P.; Zhang, Z. Y.; Song, L. T.; Liu, Y.

    2017-07-01

    A total of 130 topsoil samples collected from Guoyang County, Anhui Province, China, were used to establish a Vis-NIR model for the prediction of organic matter content (OMC) in lime concretion black soils. Different spectral pretreatments were applied for minimizing the irrelevant and useless information of the spectra and increasing the spectra correlation with the measured values. Subsequently, the Kennard-Stone (KS) method and sample set partitioning based on joint x-y distances (SPXY) were used to select the training set. Successive projection algorithm (SPA) and genetic algorithm (GA) were then applied for wavelength optimization. Finally, the principal component regression (PCR) model was constructed, in which the optimal number of principal components was determined using the leave-one-out cross validation technique. The results show that the combination of the Savitzky-Golay (SG) filter for smoothing and multiplicative scatter correction (MSC) can eliminate the effect of noise and baseline drift; the SPXY method is preferable to KS in the sample selection; both the SPA and the GA can significantly reduce the number of wavelength variables and favorably increase the accuracy, especially GA, which greatly improved the prediction accuracy of soil OMC with Rcc, RMSEP, and RPD up to 0.9316, 0.2142, and 2.3195, respectively.

  11. Ultrasonic extraction followed by sonolysis-ozonolysis as a sample pretreatment method for determination of reactive arsenic toward sodium tetrahydroborate by flow injection-hydride generation AAS.

    Science.gov (United States)

    Capelo, J L; Lavilla, I; Bendicho, C

    2001-08-01

    A new sample pretreatment method based on ultrasonic extraction in HCI medium and subsequent oxidation of the extracts by sonozone (i.e., sonolysis-ozonolysis) has been developed for determination of reactive arsenic toward sodium tetrahydroborate [mainly As(III) + As(V)] by flow injection-hydride generation atomic absorption spectrometry. This method avoids the use of intensive treatments with concentrated and corrosive acids, high pressures, and temperatures that are inherent with traditional wet or dry ashing procedures and entails reduced waste production and reagent consumption. A sonozone process at room temperature was optimized to break the bond of As to proteins and macromolecular constituents which was an essential requirement for effective reduction by L-cysteine prior to arsine generation. Spiking experiments showed that As(III), As(V), MMA, and DMA were fully recovered from several matrixes on applying the above treatment. On the other hand, a nonreducible As species such as arsenobetaine that is predominant in some biological samples remained unchanged. Application of the method to sediment, soil, fly ash, and plant CRMs demonstrated that, in general, a good agreement existed between certified and found As contents, thereby indicating the absence of nonreducible As forms. Low As recoveries were observed for fish CRMs, as a result of the nondegradability of arsenobetaine by sonozone. The detection limit of As in the samples investigated was in the range 0.19-2.8 microg g(-1).

  12. Joint GC-MS and LC-MS platforms for comprehensive plant metabolomics: repeatability and sample pre-treatment.

    Science.gov (United States)

    t'Kindt, Ruben; Morreel, Kris; Deforce, Dieter; Boerjan, Wout; Van Bocxlaer, Jan

    2009-11-01

    Metabolomics nowadays mostly comprises the application of both LC-MS and GC-MS based approaches. Here we investigate different extraction set-ups for these two established analytical platforms in the field of plant metabolomics. Six extraction approaches for Arabidopsis thaliana leaves, varying in extraction solvent composition, extraction temperature and order of solvent addition within the extraction sequence, were analyzed on the two platforms. Our aim was to establish the most suitable analysis protocol, practicable for both LC-MS and GC-MS analysis, in order to obtain as extensive as possible metabolome coverage. One single sample preparation procedure would save time and valuable sample while still offering the complementary datasets generated by GC-MS and LC-MS. All extraction approaches were evaluated based on the following criteria: number of detected m/z-retention time pairs, heat maps of the detected peaks, and residual enzymatic activity of invertase and phosphatase in the plant leaf extracts. Unsupervised principal component analysis (PCA) was used to evaluate grouping trends between the different extraction approaches. Quality controls, a blend of aliquots of the different extracts, were used to establish a paired evaluation of the repeatability performance of the GC-MS and LC-MS analysis. We conclude that the use of chloroform in the extraction solvent is counterproductive in an untargeted LC-MS metabolomics approach as is heating. Below room temperature (instead of heated) extraction does not significantly degrade GC-MS performance but one should be more cautious with respect to residual enzymatic activity in the plant extract.

  13. Speciation analysis, bioavailability and risk assessment of trace metals in herbal decoctions using a combined technique of in Vitro digestion and biomembrane filtration as sample pretreatment method.

    Science.gov (United States)

    Li, Shun-Xing; Lin, Lu-xiu; Lin, Jing; Zheng, Feng-Ying; Wang, Qing-Xiang; Weng, Wen

    2010-01-01

    Sample preparation is the first crucial step in the speciation analysis, bioavailability and risk assessment of trace metals in plant samples such as herb and vegetables. Two bionic technologies titled 'in vitro digestion' and 'extraction with biomembrane' were developed for pre-treatment of herbal decoction. The decoctions of Aconiteum carmichaeli and Paeonia lactiflora were digested at body temperature, at the acidity of the stomach or intestine and with inorganic and organic materials (digestive enzymes were included for whole-bionic and excluded for semi-bionic) found in the stomach or intestine. Being similar to the biomembrane between the gastrointestinal tract and blood vessels, monolayer liposome was used as a biomembrane model. Affinity-monolayer liposome metals and water-soluble metals were used for speciation analysis and bioavailability assessment of copper and zinc in herbal decoction. In the decoction of Aconiteum carmichaeli and Paeonia lactiflora, Zn was mainly absorbed in the intestine and Cu was mainly absorbed by both stomach and intestine. The safe dosage for males and females is below 257.1 g/day Aconiteum carmichaeli and 529.4 g/day Paeonia lactiflora. Copyright © 2010 John Wiley & Sons, Ltd.

  14. A simple sample pretreatment method for multi-mycotoxin determination in eggs by liquid chromatography tandem mass spectrometry.

    Science.gov (United States)

    Zhu, Runyue; Zhao, Zhiyong; Wang, Jianhua; Bai, Bing; Wu, Aibo; Yan, Liping; Song, Suquan

    2015-10-23

    In this study, a reliable and fast method using a quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction procedure without any clean-up step was developed for simultaneous extraction of 15 mycotoxins, i.e., aflatoxin B1, aflatoxin B2, aflatoxin G1, aflatoxin G2, aflatoxin M1, aflatoxin M2, deoxynivalenol, 3-acetyldeoxynivalenol, 15-acetyldeoxynivalenol, de-epoxy-DON, zearalenone, α-zearalenol, β-zearalenol, α-zearalanol, and β-zearalanol, from eggs. High-performance liquid chromatography tandem mass spectrometry was used to separate and detect all of the analytes. Electrospray ionization at both negative and positive modes and multiple reaction-monitoring mode were applied to detect these analytes. The main factors, such as extraction time, extraction solvent, evaporation temperature, and pH of the solvent, were carefully optimized to improve the extraction efficiency. The coefficients of determination of the calibration curves ranged from 0.9884 to 0.9998. The recoveries of most of the analytes were between 71.3% and 105.4% at three concentration levels, except for AFB1 that showed recovery rates of not more than 67.5% in all concentrations. The repeatability and intra-lab reproducibility of this method were both lower than 15% and 25%, respectively. The limit of quantification ranged from 0.2 μg/kg to 5 μg/kg. The matrix effect was evaluated and reduced by the use of matrix-matched calibration curves. The validated method was applied in a pilot study to analyze mycotoxin contamination in 12 eggs, and trace amounts of deoxynivalenol, 15-acetyldeoxynivalenol, aflatoxin B1, aflatoxin G2, zearalenone and β-zearalenol were detected in these samples. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. Importance Sampling Based Decision Trees for Security Assessment and the Corresponding Preventive Control Schemes: the Danish Case Study

    DEFF Research Database (Denmark)

    Liu, Leo; Rather, Zakir Hussain; Chen, Zhe

    2013-01-01

    Decision Trees (DT) based security assessment helps Power System Operators (PSO) by providing them with the most significant system attributes and guiding them in implementing the corresponding emergency control actions to prevent system insecurity and blackouts. DT is obtained offline from time......-domain simulation and the process of data mining, which is then implemented online as guidelines for preventive control schemes. An algorithm named Classification and Regression Trees (CART) is used to train the DT and key to this approach lies on the accuracy of DT. This paper proposes contingency oriented DT...

  16. Does the pretreatment tumor sampling location correspond with metabolic activity on 18F-FDG PET/CT in breast cancer patients scheduled for neoadjuvant chemotherapy?

    Energy Technology Data Exchange (ETDEWEB)

    Koolen, Bas B., E-mail: b.koolen@nki.nl [Department of Nuclear Medicine, Netherlands Cancer Institute – Antoni van Leeuwenhoek Hospital, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands); Department of Surgical Oncology, Netherlands Cancer Institute – Antoni van Leeuwenhoek Hospital, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands); Elshof, Lotte E. [Department of Nuclear Medicine, Netherlands Cancer Institute – Antoni van Leeuwenhoek Hospital, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands); Department of Surgical Oncology, Netherlands Cancer Institute – Antoni van Leeuwenhoek Hospital, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands); Loo, Claudette E. [Department of Radiology, Netherlands Cancer Institute – Antoni van Leeuwenhoek Hospital, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands); Wesseling, Jelle [Department of Pathology, Netherlands Cancer Institute – Antoni van Leeuwenhoek Hospital, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands); Vrancken Peeters, Marie-Jeanne T.F.D. [Department of Surgical Oncology, Netherlands Cancer Institute – Antoni van Leeuwenhoek Hospital, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands); Vogel, Wouter V. [Department of Nuclear Medicine, Netherlands Cancer Institute – Antoni van Leeuwenhoek Hospital, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands); Rutgers, Emiel J.Th. [Department of Surgical Oncology, Netherlands Cancer Institute – Antoni van Leeuwenhoek Hospital, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands); Valdés Olmos, Renato A. [Department of Nuclear Medicine, Netherlands Cancer Institute – Antoni van Leeuwenhoek Hospital, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands)

    2013-12-01

    Purpose: To define the correlation between the core biopsy location and the area with highest metabolic activity on 18F-FDG PET/CT in stage II–III breast cancer patients before neoadjuvant chemotherapy. Also, we would like to select a subgroup of patients in which PET/CT information may optimize tumor sampling. Methods: A PET/CT in prone position was acquired in 199 patients with 203 tumors. The distance and relative difference in standardized uptake value (SUV) between core biopsy localization (indicated by a marker) and area with highest degree of FDG uptake were evaluated. A distance ≥2 cm and a relative difference in SUV ≥25% were considered clinically relevant and a combination of both was defined as non-correspondence. Non-correspondence for different tumor characteristics (TNM stage, lesion morphology on MRI and PET/CT, histology, subtype, grade, and Ki-67) was assessed. Results: Non-correspondence was found in 28 (14%) of 203 tumors. Non-correspondence was significantly associated with T-stage, lesion morphology on MRI and PET/CT, tumor diameter, and histologic type. It was more often seen in tumors with a higher T-stage (p = 0.028), diffuse (non-mass) and multifocal tumors on MRI (p = 0.001), diffuse and multifocal tumors on PET/CT (p < 0.001), tumors >3 cm (p < 0.001), and lobular carcinomas (p < 0.001). No association was found with other features. Conclusion: Non-correspondence between the core biopsy location and area with highest FDG uptake is regularly seen in stage II–III breast cancer patients. PET/CT information and possibly FDG-guided biopsies are most likely to improve pretreatment tumor sampling in tumors >3 cm, lobular carcinomas, and diffuse and multifocal tumors.

  17. Integrated separation scheme for measuring a suite of fission and activation products from a fresh mixed fission and activation product sample

    Energy Technology Data Exchange (ETDEWEB)

    Morley, Shannon M.; Seiner, Brienne N.; Finn, Erin C.; Greenwood, Lawrence R.; Smith, Steven C.; Gregory, Stephanie J.; Haney, Morgan M.; Lucas, Dawn D.; Arrigo, Leah M.; Beacham, Tere A.; Swearingen, Kevin J.; Friese, Judah I.; Douglas, Matthew; Metz, Lori A.

    2015-05-01

    Mixed fission and activation materials resulting from various nuclear processes and events contain a wide range of isotopes for analysis spanning almost the entire periodic table. In some applications such as environmental monitoring, nuclear waste management, and national security a very limited amount of material is available for analysis and characterization so an integrated analysis scheme is needed to measure multiple radionuclides from one sample. This work describes the production of a complex synthetic sample containing fission products, activation products, and irradiated soil and determines the percent recovery of select isotopes through the integrated chemical separation scheme. Results were determined using gamma energy analysis of separated fractions and demonstrate high yields of Ag (76 ± 6%), Au (94 ± 7%), Cd (59 ± 2%), Co (93 ± 5%), Cs (88 ± 3%), Fe (62 ± 1%), Mn (70 ± 7%), Np (65 ± 5%), Sr (73 ± 2%) and Zn (72 ± 3%). Lower yields (< 25%) were measured for Ga, Ir, Sc, and W. Based on the results of this experiment, a complex synthetic sample can be prepared with low atom/fission ratios and isotopes of interest accurately and precisely measured following an integrated chemical separation method.

  18. On-line sample-pre-treatment schemes for trace-level determinations of metals by coupling flow injection or sequential injection with ICP-MS

    DEFF Research Database (Denmark)

    Wang, Jianhua; Hansen, Elo Harald

    2003-01-01

    for on-line matrix separation and pre-concentration of trace levels of metals with detection by ICP-MS. It highlights some of the frequently applied on-line, sample-pre-treatment schemes, including solid phase extraction (SPE), on-wall molecular sorption and precipitate/(co)-precipitate retention using...... a polytetrafluoroethylene (PTFE) knotted reactor (KR), solvent extraction-back extraction and hydride/vapor generation. It also addresses a novel, robust approach, whereby the protocol of SI-LOV-bead injection (BI) on-line separation and pre-concentration of ultra-trace levels of metals by a renewable microcolumn...

  19. A resting box for outdoor sampling of adult Anopheles arabiensis in rice irrigation schemes of lower Moshi, northern Tanzania

    Directory of Open Access Journals (Sweden)

    Msangi Shandala

    2009-04-01

    Full Text Available Abstract Background Malaria vector sampling is the best method for understanding the vector dynamics and infectivity; thus, disease transmission seasonality can be established. There is a need to protecting humans involved in the sampling of disease vectors during surveillance or in control programmes. In this study, human landing catch, two cow odour baited resting boxes and an unbaited resting box were evaluated as vector sampling tools in an area with a high proportion of Anopheles arabiensis, as the major malaria vector. Methods Three resting boxes were evaluated against human landing catch. Two were baited with cow odour, while the third was unbaited. The inner parts of the boxes were covered with black cloth materials. Experiments were arranged in latin-square design. Boxes were set in the evening and left undisturbed; mosquitoes were collected at 06:00 am the next morning, while human landing catch was done overnight. Results A total of 9,558 An. arabiensis mosquitoes were collected. 17.5% (N = 1668 were collected in resting box baited with cow body odour, 42.5% (N = 4060 in resting box baited with cow urine, 15.1% (N = 1444 in unbaited resting box and 24.9% (N = 2386 were collected by human landing catch technique. In analysis, the house positions had no effect on the density of mosquitoes caught (DF = 3, F = 0.753, P = 0.387; the sampling technique had significant impact on the caught mosquitoes densities (DF = 3, F 37. 944, P Conclusion Odour-baited resting boxes have shown the possibility of replacing the existing traditional method (human landing catch for sampling malaria vectors in areas with a high proportion of An. arabiensis as malaria vectors. Further evaluations of fermented urine and longevity of the urine odour still need to be investigated.

  20. Importance of specimen pretreatment for the low-level detection of mycobacterial lipoarabinomannan in human serum.

    Science.gov (United States)

    Laurentius, Lars B; Crawford, Alexis C; Mulvihill, Timothy S; Granger, Jennifer H; Robinson, Ryan; Spencer, John S; Chatterjee, Delphi; Hanson, Kimberly E; Porter, Marc D

    2016-12-19

    Patient care and prevention of disease outbreaks rely heavily on the performance of diagnostic tests. These tests are typically carried out in serum, urine, and other complex sample matrices, but are often plagued by a number of matrix effects such as nonspecific adsorption and complexation with circulating proteins. This paper demonstrates the importance of sample pretreatment to overcome matrix effects, enabling the low-level detection of a disease marker for tuberculosis (TB). The impact of pretreatment is illustrated by detecting a cell wall component unique to mycobacteria, lipoarabinomannan (LAM). LAM is a major virulence factor in the infectious pathology of Mycobacterium tuberculosis (Mtb) and has been successfully detected in the body fluids of TB-infected individuals; however, its clinical sensitivity - identifying patients with active infection - remains problematic. This and the companion paper show that the detection of LAM in an immunoassay is plagued by its complexation with proteins and other components in serum. Herein, we present the procedures and results from an investigation of several different pretreatment schemes designed to disrupt complexation and thereby improve detection. These sample pretreatment studies, aimed at determining the optimal conditions for complex disruption, were carried out by using a LAM simulant derived from the nonpathogenic M. smegmatis, a mycobacterium often used as a model for Mtb. We have found that a perchloric acid-based pretreatment step improves the ability to detect this simulant by ∼1500× with respect to that in untreated serum. This paper describes the approach to pretreatment, how pretreatment improves the detection of the LAM simulant in human serum, and the results from a preliminary investigation to identify possible contributors to complexation by fractionating serum according to molecular weight. The companion paper applies this pretreatment approach to assays of TB patient samples.

  1. Estimating effect of environmental contaminants on women's subfecundity for the MoBa study data with an outcome-dependent sampling scheme.

    Science.gov (United States)

    Ding, Jieli; Zhou, Haibo; Liu, Yanyan; Cai, Jianwen; Longnecker, Matthew P

    2014-10-01

    Motivated by the need from our on-going environmental study in the Norwegian Mother and Child Cohort (MoBa) study, we consider an outcome-dependent sampling (ODS) scheme for failure-time data with censoring. Like the case-cohort design, the ODS design enriches the observed sample by selectively including certain failure subjects. We present an estimated maximum semiparametric empirical likelihood estimation (EMSELE) under the proportional hazards model framework. The asymptotic properties of the proposed estimator were derived. Simulation studies were conducted to evaluate the small-sample performance of our proposed method. Our analyses show that the proposed estimator and design is more efficient than the current default approach and other competing approaches. Applying the proposed approach with the data set from the MoBa study, we found a significant effect of an environmental contaminant on fecundability. © The Author 2014. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  2. Fe3O4@Graphene Oxide@Ag Particles for Surface Magnet Solid-Phase Extraction Surface-Enhanced Raman Scattering (SMSPE-SERS): From Sample Pretreatment to Detection All-in-One.

    Science.gov (United States)

    Liu, Zhigang; Wang, Yi; Deng, Rong; Yang, Liyuan; Yu, Shihua; Xu, Shuping; Xu, Weiqing

    2016-06-08

    A multifunctional magnetic graphene surface-enhanced Raman scattering (SERS) substrate was fabricated successfully by the layer-by-layer assembly of silver and graphene oxide (GO) nanoparticles (NPs) on the magnetic ferroferric oxide particles (Fe3O4@GO@Ag). This ternary particle possesses magnetic properties, SERS activity, and adsorption ability simultaneously. Owing to the multifunction of this Fe3O4@GO@Ag ternary complex, we put forward a new method called a surface magnetic solid-phase extraction (SMSPE) technique, for the SERS detections of pesticide residues on the fruit peels. SMSPE integrates many sample pretreatment procedures, such as surface extraction, separation sample, and detection, all-in-one. So this method shows great superiority in simplicity, rapidity, and high efficiency above other standard methods. The whole detection process can be finished within 20 min including the sample pretreatment and SERS detection. Owing to the high density of Ag NPs, the detection sensitivity is high enough that the lowest detectable concentrations are 0.48 and 40 ng/cm(2) for thiram and thiabendazole, which are much lower than the maximal residue limits in fruit prescribed by the U.S. Environmental Protection Agency. This multifunctional ternary particle and its corresponding analytical method have been proven to be applicable for practical samples and also valuable for other surface analysis.

  3. Recent developments in automated determinations of trace level concentrations of elements and on-line fractionations schemes exploiting the micro-sequential injection - lab-on-valve approach

    DEFF Research Database (Denmark)

    Hansen, Elo Harald; Miró, Manuel; Long, Xiangbao

    2006-01-01

    The determination of trace level concentrations of elements, such as metal species, in complex matrices by atomic absorption or emission spectrometric methods often require appropriate pretreatments comprising separation of the analyte from interfering constituents and analyte preconcentration......-up, and the combination of SPE with fractionation schemes of environmentally interesting solid samples (such as soils or sediments) in order to conduct ecotoxicological studies....

  4. Colour schemes

    DEFF Research Database (Denmark)

    van Leeuwen, Theo

    2013-01-01

    This chapter presents a framework for analysing colour schemes based on a parametric approach that includes not only hue, value and saturation, but also purity, transparency, luminosity, luminescence, lustre, modulation and differentiation.......This chapter presents a framework for analysing colour schemes based on a parametric approach that includes not only hue, value and saturation, but also purity, transparency, luminosity, luminescence, lustre, modulation and differentiation....

  5. Sample pretreatment optimization for the analysis of short chain chlorinated paraffins in soil with gas chromatography-electron capture negative ion-mass spectrometry.

    Science.gov (United States)

    Chen, Laiguo; Huang, Yumei; Han, Shuang; Feng, Yongbin; Jiang, Guo; Tang, Caiming; Ye, Zhixiang; Zhan, Wei; Liu, Ming; Zhang, Sukun

    2013-01-25

    Accurately quantifying short chain chlorinated paraffins (SCCPs) in soil samples with gas chromatograph coupled with electron capture negative ionization mass spectrometry (GC-ECNI-MS) is difficult because many other polychlorinated pollutants are present in the sample matrices. These pollutants (e.g., polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and toxaphene) can cause serious interferences during SCCPs analysis with GC-MS. Four main columns packed with different adsorbents, including silica gel, Florisil and alumina, were investigated in this study to determine their performance for separating interfering pollutants from SCCPs. These experimental results suggest that the optimum cleanup procedure uses a silica gel column and a multilayer silica gel-Florisil composite column. This procedure completely separated 22 PCB congeners, 23 OCPs and three toxaphene congeners from SCCPs. However, p,p'-DDD, cis-nonachlor and o,p'-DDD were not completely removed and only 53% of the total toxaphene was removed. This optimized method was successfully and effectively applied for removing interfering pollutants from real soil samples. SCCPs in 17 soil samples from different land use areas within a suburban region were analyzed with the established method. The concentrations of SCCPs in these samples were between 7 and 541 ng g(-1) (mean: 84 ng g(-1)). Similar homologue SCCPs patterns were observed between the soil samples collected from different land use areas. In addition, lower chlorinated (Cl(6/7)) C(10)- and C(11)- SCCPs were the dominant congeners. Copyright © 2012 Elsevier B.V. All rights reserved.

  6. Sampling

    CERN Document Server

    Thompson, Steven K

    2012-01-01

    Praise for the Second Edition "This book has never had a competitor. It is the only book that takes a broad approach to sampling . . . any good personal statistics library should include a copy of this book." —Technometrics "Well-written . . . an excellent book on an important subject. Highly recommended." —Choice "An ideal reference for scientific researchers and other professionals who use sampling." —Zentralblatt Math Features new developments in the field combined with all aspects of obtaining, interpreting, and using sample data Sampling provides an up-to-date treat

  7. Methods for pretreating biomass

    Energy Technology Data Exchange (ETDEWEB)

    Balan, Venkatesh; Dale, Bruce E; Chundawat, Shishir; Sousa, Leonardo

    2017-05-09

    A method for pretreating biomass is provided, which includes, in a reactor, allowing gaseous ammonia to condense on the biomass and react with water present in the biomass to produce pretreated biomass, wherein reactivity of polysaccharides in the biomass is increased during subsequent biological conversion as compared to the reactivity of polysaccharides in biomass which has not been pretreated. A method for pretreating biomass with a liquid ammonia and recovering the liquid ammonia is also provided. Related systems which include a biochemical or biofuel production facility are also disclosed.

  8. Development of a new sample pre-treatment procedure based on pressurized liquid extraction for the determination of metals in edible seaweed.

    Science.gov (United States)

    Moreda-Piñeiro, Jorge; Alonso-Rodríguez, Elia; López-Mahía, Purificación; Muniategui-Lorenzo, Soledad; Prada-Rodríguez, Darío; Moreda-Piñeiro, Antonio; Bermejo-Barrera, Pilar

    2007-08-13

    A new, simple, fast and automated method based on acetic acid-pressurized liquid extraction (PLE) has been developed for the simultaneous extraction of major and trace elements (As, Ca, Cd, Co, Cr, K, Mg, Mn, Na, Pb, Sr and Zn) from edible seaweeds. The target elements have been simultaneously determined by inductively coupled plasma-optical emission spectrometry (ICP-OES). The influence of several extraction parameters (e.g. acetic acid concentration, extraction temperature, extraction time, pressure, number of cycles, particle size and diatomaceous earth (DE) mass/sample mass ratio) on the efficiency of metal leaching has been evaluated. The results showed that metal extraction efficiency depends on the mass ratio of the dispersing agent mass and the sample. The optimized procedure consisted of the following conditions: acetic acid (0.75 M) as an extracting solution, 5 min of extraction time, one extraction cycle at room temperature at a pressure of 10.3 MPa and addition of a dispersing agent (at a ratio of 5:1 over the sample mass). The leaching procedure was completed after 7 min (5 min extraction time plus 1 min purge time plus 1 min end relief time). Limits of detection and quantification and repeatability of the over all procedure have been assessed. Method validation was performed analysing two seaweed reference materials (NIES-03 Chlorella Kessleri and NIES-09 Sargasso). The developed extraction method has been applied to red (Dulse and Nori), green (Sea Lettuce) and brown (Kombu, Wakame and Sea Spaghetti) edible seaweeds.

  9. Implementation of suitable FI/SI-sample separation/preconcentration schemes for determinations of trace-metal concentrations when using detection by ETAAS and ICPMS

    DEFF Research Database (Denmark)

    Hansen, Elo Harald; Wang, Jianhua

    and selectivity. Either in order to separate/preconcentrate the analyte material, or because of the presence of potentially interfering matrix constituents. Such pretreatments are advantageously performed in flow injection (FI) or sequential injection (SI) manifolds, where all appropriate unit operations can...... be effected under enclosed and strictly controlled conditions. Various separation/preconcentration procedures are feasible, such as liquid-liquid extraction, (co)precipitation with collection in knotted reactors, adsorption, hydride generation, or the use of ion-exchange columns. Apart from hydride generation...... accommodate up to 50 l solution, yet can tolerate inorganic as well as organic eluates, the ICPMS has a larger volumetric capacity yet cannot accept organic solvents as these adversely will impair its performance. Selected examples of separation/preconcentration FI/SI-procedures will be presented...

  10. EFFECT OF AQUEOUS PRETREATMENT ON PYROLYSIS CHARACTERISTICS OF NAPIER GRASS

    Directory of Open Access Journals (Sweden)

    ISAH YAKUB MOHAMMED

    2015-11-01

    Full Text Available Effect of non-catalytic aqueous pretretment on pyrolysis characteristics of Napier grass was investigated using thermogravimetric analyser. Increasing pretreatment severity (0.0-2.0 improved pyrolysis process. The residual mass at the end of pyrolysis for the pretreated sample was about 50% less compared to the untreated sample. Kinetics of the process was evaluated using order based model and both pretreated and untreated samples followed first order reaction. The activation energy of the pretreated samples was similar and higher than that of the raw sample which was attributed to faster rate of decomposition due removal of hetromaterials (ash, extractives and some hemicellulose in the pretreatment stage. Finally, this pretreatment method has demonstrated effectiveness for the removal of pyrolysis retardants and will improve the quantity and quality of bio-oil yield.

  11. A quick, easy, cheap, effective, rugged, and safe sample pretreatment and liquid chromatography with tandem mass spectrometry method for the simultaneous quantification of 33 mycotoxins in Lentinula edodes.

    Science.gov (United States)

    Han, Zheng; Feng, Zhihong; Shi, Wen; Zhao, Zhihui; Wu, Yongjiang; Wu, Aibo

    2014-08-01

    Lentinula edodes, one of the most cultivated edible fungi in the world, are usually neglected for mycotoxins contamination due to the initial thinking of its resistance to mycotoxingenic molds. In the present study, a sensitive and reliable liquid chromatography with tandem mass spectrometry method was developed for the simultaneous quantification of 33 mycotoxins in L. edodes. Targeted mycotoxins were extracted using a quick, easy, cheap, effective, rugged, and safe procedure without any further clean-up step, and analyzed by liquid chromatography with tandem mass spectrometry on an Agilent Poroshell 120 EC-C18 column (100 × 3 mm, 2.7 μm) with a linear gradient elution program using water containing 5 mM ammonium acetate and methanol as the mobile phase. After validation by determining linearity (R(2) > 0.99), sensitivity (LOQ ≤ 20 ng/kg), recovery (73.6-117.9%), and precision (0.8-19.5%), the established method has been successfully applied to reveal the contamination states of various mycotoxins in L. edodes. Among the 30 tested samples, 22 were contaminated by various mycotoxins with the concentration levels ranging from 3.3-28,850.7 μg/kg, predicting that the edible fungus could be infected by the mycotoxins-producing fungi. To the best of our knowledge, this is the first report about real mycotoxins contamination in L. edodes. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. A rapid and simple pretreatment method for benzoylurea insecticides in honey samples using in-syringe dispersive liquid-liquid microextraction based on the direct solidification of ionic liquids.

    Science.gov (United States)

    Wang, Huazi; Hu, Lu; Li, Wanzhen; Lu, Runhua; Zhang, Sanbing; Zhou, Wenfeng; Gao, Haixiang

    2016-11-04

    A pretreatment method using in-syringe dispersive liquid-liquid microextraction based on the direct solidification of ionic liquids before high performance liquid chromatography analysis was developed for the determination of benzoylurea insecticides (BUs) in honey samples. The hydrophobic ionic liquid [N4444][PF6], formed in situ by the hydrophilic ionic liquid [N4444]Cl and the ion exchange reagent KPF6, was used to extract the target analytes. The entire extraction procedure was performed in a syringe. The extractant was solidified at room temperature and collected using a nylon membrane filter. This technique did not require a dispersive solvent, vortex mixer, ultrasound bath, or centrifugation. The parameters affecting the extraction efficiency were investigated through an experimental design. Under the optimal conditions, the limits of detection for the four BUs varied from 0.21 to 0.42μgL-1 in solution (2.1-4.2μgkg-1 in honey). Good linearities were obtained in the range of 2-300μgL-1, with coefficients of determination greater than 0.999. The recoveries of the four BUs ranged from 80.94% to 84.59%. The intra-day (n=3) and inter-day (n=3) relative standard deviations were less than 5.08%. Finally, the proposed method was applied to the determination of BUs in commercial honey samples with satisfactory results. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Additive operator-difference schemes splitting schemes

    CERN Document Server

    Vabishchevich, Petr N

    2013-01-01

    Applied mathematical modeling isconcerned with solving unsteady problems. This bookshows how toconstruct additive difference schemes to solve approximately unsteady multi-dimensional problems for PDEs. Two classes of schemes are highlighted: methods of splitting with respect to spatial variables (alternating direction methods) and schemes of splitting into physical processes. Also regionally additive schemes (domain decomposition methods)and unconditionally stable additive schemes of multi-component splitting are considered for evolutionary equations of first and second order as well as for sy

  14. Impact of pretreatment on colour and texture of watermelon rind

    Science.gov (United States)

    Athmaselvi, K.; Alagusundaram, K.; Kavitha, C.; Arumuganathan, T.

    2012-07-01

    The effect of osmotic dehydration pretreatment on water loss, solid gain, colour and textural change was investigated. Watermelon rind 1 x 1 cm size was immersed in sucrose solution of 40, 50 and 60° Brix after pretreatment with microwave and conventional boiling in water for 1, 3, and 5 min, respectively. Water loss and solid gain increased with the time of cooking and sugar concentration. Microwave pretreated samples showed higher water loss and solid gain. Increase in the time of cooking decreased the brightness of all the samples. Microwave pretreated samples showed higher `b' values than conventionally pretreated ones. There was no significant difference (P≤0.05) in texture profile analysis parameters except for hardness. Hardness decreased with increase in time of cooking and sugar concentration. Second order regression model was developed for water loss and solid gain of microwave and conventional pretreated watermelon rind.

  15. Evaluation of spot and passive sampling for monitoring, flux estimation and risk assessment of pesticides within the constraints of a typical regulatory monitoring scheme.

    Science.gov (United States)

    Zhang, Zulin; Troldborg, Mads; Yates, Kyari; Osprey, Mark; Kerr, Christine; Hallett, Paul D; Baggaley, Nikki; Rhind, Stewart M; Dawson, Julian J C; Hough, Rupert L

    2016-11-01

    In many agricultural catchments of Europe and North America, pesticides occur at generally low concentrations with significant temporal variation. This poses several challenges for both monitoring and understanding ecological risks/impacts of these chemicals. This study aimed to compare the performance of passive and spot sampling strategies given the constraints of typical regulatory monitoring. Nine pesticides were investigated in a river currently undergoing regulatory monitoring (River Ugie, Scotland). Within this regulatory framework, spot and passive sampling were undertaken to understand spatiotemporal occurrence, mass loads and ecological risks. All the target pesticides were detected in water by both sampling strategies. Chlorotoluron was observed to be the dominant pesticide by both spot (maximum: 111.8ng/l, mean: 9.35ng/l) and passive sampling (maximum: 39.24ng/l, mean: 4.76ng/l). The annual pesticide loads were estimated to be 2735g and 1837g based on the spot and passive sampling data, respectively. The spatiotemporal trend suggested that agricultural activities were the primary source of the compounds with variability in loads explained in large by timing of pesticide applications and rainfall. The risk assessment showed chlorotoluron and chlorpyrifos posed the highest ecological risks with 23% of the chlorotoluron spot samples and 36% of the chlorpyrifos passive samples resulting in a Risk Quotient greater than 0.1. This suggests that mitigation measures might need to be taken to reduce the input of pesticides into the river. The overall comparison of the two sampling strategies supported the hypothesis that passive sampling tends to integrate the contaminants over a period of exposure and allows quantification of contamination at low concentration. The results suggested that within a regulatory monitoring context passive sampling was more suitable for flux estimation and risk assessment of trace contaminants which cannot be diagnosed by spot

  16. Quality evaluation of beverage produced from pre-treated tigernut ...

    African Journals Online (AJOL)

    Beverage samples from pretreated and untreated tigernut were evaluated for physical and chemical properties. Sensory evaluation of the beverage samples were carried out and the best preferred tigernutbeverage was compared with a popularly consumed beverage, soymilk. All the pre-treatments, except germination, ...

  17. Different Sample Pre-Treatment Procedures for

    African Journals Online (AJOL)

    There is a ten times increased risk of countries ClIl. Il Olt afford LL aaa them for developing TB in HIV-infected individuals routine laboratory services. Culture is the. (4). In 1995 about one-third of the 17 reference method for the detection of million HIV-infected people world wide tubercle bacilli. Culture of mycobacterium.

  18. Scheme Program Documentation Tools

    DEFF Research Database (Denmark)

    Nørmark, Kurt

    2004-01-01

    This paper describes and discusses two different Scheme documentation tools. The first is SchemeDoc, which is intended for documentation of the interfaces of Scheme libraries (APIs). The second is the Scheme Elucidator, which is for internal documentation of Scheme programs. Although the tools...

  19. Quality improvement in determination of chemical oxygen demand in samples considered difficult to analyze, through participation in proficiency-testing schemes

    DEFF Research Database (Denmark)

    Raposo, Francisco; Fernández-Cegrí, V.; De la Rubia, M.A.

    2010-01-01

    Chemical oxygen demand (COD) is a critical analytical parameter in waste and wastewater treatment, more specifically in anaerobic digestion, although little is known about the quality of measuring COD of anaerobic digestion samples. Proficiency testing (PT) is a powerful tool that can be used...

  20. GREET Pretreatment Module

    Energy Technology Data Exchange (ETDEWEB)

    Adom, Felix K. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division; Dunn, Jennifer B. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division; Han, Jeongwoo [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division

    2014-09-01

    A wide range of biofuels and biochemicals can be produced from cellulosic biomass via different pretreatment technologies that yield sugars. Process simulations of dilute acid and ammonia fiber expansion pretreatment processes and subsequent hydrolysis were developed in Aspen Plus for four lignocellulosic feedstocks (corn stover, miscanthus, switchgrass, and poplar). This processing yields sugars that can be subsequently converted to biofuels or biochemical. Material and energy consumption data from Aspen Plus were then compiled in a new Greenhouses Gases, Regulated Emissions, and Energy Use in Transportation (GREETTM) pretreatment module. The module estimates the cradle-to-gate fossil energy consumption (FEC) and greenhouse gas (GHG) emissions associated with producing fermentable sugars. This report documents the data and methodology used to develop this module and the cradle-to-gate FEC and GHG emissions that result from producing fermentable sugars.

  1. Biochemical degradation and physical migration of polyphenolic compounds in osmotic dehydrated blueberries with pulsed electric field and thermal pretreatments.

    Science.gov (United States)

    Yu, Yuanshan; Jin, Tony Z; Fan, Xuetong; Wu, Jijun

    2018-01-15

    Fresh blueberries were pretreated by pulsed electric fields (PEF) or thermal pretreatment and then were subject to osmotic dehydration. The changes in contents of anthocyanins, predominantly phenolic acids and flavonols, total phenolics, polyphenol oxidase (PPO) activity and antioxidant activity in the blueberry samples during pretreatment and osmotic dehydration were investigated. Biochemical degradation and physical migration of these nutritive compounds from fruits to osmotic solutions were observed during the pretreatments and osmotic dehydration. PEF pretreated samples had the least degradation loss but the most migration loss of these compounds compared to thermally pretreated and control samples. Higher rates of water loss and solid gain during osmotic dehydration were also obtained by PEF pretreatment, reducing the dehydration time from 130 to 48h. PEF pretreated and dehydrated fruits showed superior appearance to thermally pretreated and control samples. Therefore, PEF pretreatment is a preferred technology that balances nutritive quality, appearance, and dehydration rate. Published by Elsevier Ltd.

  2. Influence of ultrasound pretreatment on wood physiochemical structure.

    Science.gov (United States)

    He, Zhengbin; Wang, Zhenyu; Zhao, Zijian; Yi, Songlin; Mu, Jun; Wang, Xiaoxu

    2017-01-01

    As an initial step to increase the use of renewable biomass resources, this study was aimed at investigating the effects of ultrasound pretreatment on structural changes of wood. Samples were pretreated by ultrasound with the power of 300W and frequency of 28kHz in aqueous soda solution, aqueous acetic acid, or distilled water, then pretreated and control samples were characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The results shown that ultrasound pretreatment is indeed effective in modifying the physiochemical structure of eucalyptus wood; the pretreatment decreased the quantity of alkali metals (e.g., potassium, calcium and magnesium) in the resulting material. Compared to the control group, the residual char content of samples pretreated in aqueous soda solution increased by 10.08%-20.12% and the reaction temperature decreased from 361°C to 341°C, however, in samples pretreated by ultrasound in acetic solution or distilled water, the residual char content decreased by 12.40%-21.45% and there were no significant differences in reactivity apart from a slightly higher maximum reaction rate. Ultrasound pretreatment increased the samples' crystallinity up to 35.5% and successfully removed cellulose, hemicellulose, and lignin from the samples; the pretreatment also increased the exposure of the sample to the treatment solutions, broke down sample pits, and generated collapses and microchannels on sample pits, and removed attachments in the samples. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. Acetic acid pretreatment improves the hardness of cooked potato slices.

    Science.gov (United States)

    Zhao, Wenlin; Shehzad, Hussain; Yan, Shoulei; Li, Jie; Wang, Qingzhang

    2017-08-01

    The effects of acetic acid pretreatment on the texture of cooked potato slices were investigated in this work. Potato slices were pretreated with acetic acid immersion (AAI), distilled water immersion (DWI), or no immersion (NI). Subsequently, the cell wall material of the pretreated samples was isolated and fractioned to evaluate changes in the monosaccharide content and molar mass (MM), and the hardness and microscopic structure of the potato slices in different pretreatments before and after cooking were determined. The results showed that the highest firmness was obtained with more intact structure of the cell wall for cooked potato slices with AAI pretreatment. Furthermore, the MM and sugar ratio demonstrated that the AAI pretreated potato slices contained a higher content of the small molecular polysaccharides of cell walls, especially in the hemicellulose fraction. This work may provide a reference for potato processing. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Fungal pretreatment of lignocellulosic biomass.

    Science.gov (United States)

    Wan, Caixia; Li, Yebo

    2012-01-01

    Pretreatment is a crucial step in the conversion of lignocellulosic biomass to fermentable sugars and biofuels. Compared to thermal/chemical pretreatment, fungal pretreatment reduces the recalcitrance of lignocellulosic biomass by lignin-degrading microorganisms and thus potentially provides an environmentally-friendly and energy-efficient pretreatment technology for biofuel production. This paper provides an overview of the current state of fungal pretreatment by white rot fungi for biofuel production. The specific topics discussed are: 1) enzymes involved in biodegradation during the fungal pretreatment; 2) operating parameters governing performance of the fungal pretreatment; 3) the effect of fungal pretreatment on enzymatic hydrolysis and ethanol production; 4) efforts for improving enzymatic hydrolysis and ethanol production through combinations of fungal pretreatment and physical/chemical pretreatment; 5) the treatment of lignocellulosic biomass with lignin-degrading enzymes isolated from fungal pretreatment, with a comparison to fungal pretreatment; 6) modeling, reactor design, and scale-up of solid state fungal pretreatment; and 7) the limitations and future perspective of this technology. Copyright © 2012 Elsevier Inc. All rights reserved.

  5. Use of flow injection and sequential injection analysis schemes for the determination of trace-level concentrations of metals in complex matrices by ETAAS and ICPMS

    DEFF Research Database (Denmark)

    Hansen, Elo Harald

    2005-01-01

    to facilitate the desired sensitivity and selectivity of measurement. Such pretreatment schemes are advantageously performed in flow injection (FI) or sequential injection (SI) manifolds, where all unit operations can be effected on-line and under enclosed and strictly controlled conditions. Various separation...... and characteristics of FI and SI, we present, via selected examples, various separation/preconcentration FI/Sl schemes for the determination of trace levels of metals, with particular emphasis on the use of the novel extension of FI/SI, that is, the so-called lab-on-valve concept.......Despite their excellent analytical chemical capacities for determination of low levels of metal species, electrothermal atomic absorption spectrometry and inductively coupled plasma mass spectrometry often require suitable pretreatment (separation and preconcentration) of the sample material...

  6. Optimal pretreatment determination of kiwifruit drying via online monitoring.

    Science.gov (United States)

    Nadian, Mohammad Hossein; Abbaspour-Fard, Mohammad Hossein; Sadrnia, Hassan; Golzarian, Mahmood Reza; Tabasizadeh, Mohammad

    2016-11-01

    Pre-treating is a crucial stage of drying process. The best pretreatment for hot air drying of kiwifruit was investigated using a computer vision system (CVS), for online monitoring of drying attributes including drying time, colour changes and shrinkage, as decision criteria and using clustering method. Slices were dried at 70 °C with hot water blanching (HWB), steam blanching (SB), infrared blanching (IR) and acid ascorbic 1% w/w (AA) as pretreatments each with three durations of 5, 10 and 15 min. The results showed that the cells in HWB-pretreated samples stretched without any cell wall rupture, while the highest damage was observed in AA-pretreated kiwifruit microstructure. Increasing duration of AA and HWB significantly lengthened the drying time while SB showed opposite results. The drying rate had a profound effect on the progression of the shrinkage. The total colour change of pretreated samples was higher than those with no pretreatment except for AA and HWB. The AA could well prevent colour change during the initial stage of drying. Among all pretreatments, SB and IR had the highest colour changes. HWB with a duration of 5 min is the optimum pretreatment method for kiwifruit drying. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  7. Influence of Chemical Pretreatment on the Quality of Dried Whole ...

    African Journals Online (AJOL)

    Chemical pretreatment of vegetables prior to drying is widely used to improve colour, texture and overall acceptability. Thus, this study investigated the effect of chemical pretreatment on some physico-chemical properties, colour and rehydration properties of dried red bell pepper. Fresh samples of whole red bell peppers ...

  8. Effect of combination pre-treatment on physicochemical, sensory ...

    African Journals Online (AJOL)

    Effect of combination pre-treatment on physicochemical, sensory and microbial characteristics of fresh aerobically stored minced goat (Black Bengal) meat organs. ... African Journal of Biotechnology ... However, acetic acid and glucose pretreatment controlled the fungal growth in meat samples most effectively. The

  9. Automated sequential injection-microcolumn approach with on-line flame atomic absorption spectrometric detection for implementing metal fractionation schemes of homogeneous and non-homogeneous solid samples of environmental interest

    DEFF Research Database (Denmark)

    Chomchoei, Roongrat; Miró, Manuel; Hansen, Elo Harald

    2005-01-01

    , and Testing sequential extraction method have been also performed in a dynamic fashion and critically compared with the conventional batch-wise protocols. The ecotoxicological relevance of the data provided by both methods with different operationally defined conditions is thoroughly discussed. As compared...... reagents into the flow network and the minute, well-defined injection of the desired leachate volume into the detector. Moreover, a highly time-resolved information on the ongoing extraction is given, which is particular relevant for monitoring fast leaching kinetics, such as those involving strong...... chelating agents. On-line and off-line (for Cu, Pb and Zn) single extraction schemes are also proven to constitute attractive alternatives for fast screening of metal pollution in solid samples, and for predicting the current, rather than the potential, element bioavailability by the assessment...

  10. Influence of pre-treatment on torrefaction of Phyllostachys edulis.

    Science.gov (United States)

    Xu, Xiwei; Jiang, Enchen; Lan, Xiang

    2017-09-01

    This study investigated the effects of different pre-treatments on structural changes in Phyllostachys edulis. Samples were pretreated with water, 15% ammonia water, 2% sulfuric acid, hydrothermal carbonization, and ball milling. Moreover, ultrasound was introduced. The influence of pre-treatment on the physiochemical property and composition of P. edulis were studied. Moreover, torrefaction characterization was performed and the distribution of torrefaction products of pretreated samples was determined. Results showed that pre-treatment effectively modified physiochemical structure and the torrefaction property of P. edulis. The pretreatment reduced the ash content and increased the bio-oil content of the torrefaction products. Compared with that of the raw material, the residual bio-char content of the pretreated samples decreased by 2-8%, and degradation temperature of bio-char fluctuated between 365°C and 321°C. The distribution of bio-oil contents, bio-char, and bio-gas in the torrefaction products significantly varied with pretreatments methods. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Biomass shock pretreatment

    Science.gov (United States)

    Holtzapple, Mark T.; Madison, Maxine Jones; Ramirez, Rocio Sierra; Deimund, Mark A.; Falls, Matthew; Dunkelman, John J.

    2014-07-01

    Methods and apparatus for treating biomass that may include introducing a biomass to a chamber; exposing the biomass in the chamber to a shock event to produce a shocked biomass; and transferring the shocked biomass from the chamber. In some aspects, the method may include pretreating the biomass with a chemical before introducing the biomass to the chamber and/or after transferring shocked biomass from the chamber.

  12. Investigation of Pleurotus ostreatus pretreatment on switchgrass for ethanol production

    Science.gov (United States)

    Slavens, Shelyn Gehle

    Fungal pretreatment using the white-rot fungus Pleurotus ostreatus on switchgrass for ethanol production was studied. In a small-scale storage study, small switchgrass bales were inoculated with fungal spawn and automatically watered to maintain moisture. Sampled at 25, 53, and 81 d, the switchgrass composition was determined and liquid hot water (LHW) pretreatment was conducted. Fungal pretreatment significantly decreased the xylan and lignin content; glucan was not significantly affected by fungal loading. The glucan, xylan, and lignin contents significantly decreased with increased fungal pretreatment time. The effects of the fungal pretreatment were not highly evident after the LHW pretreatment, showing only changes based on sampling time. Although other biological activity within the bales increased cellulose degradation, the fungal pretreatment successfully reduced the switchgrass lignin and hemicellulose contents. In a laboratory-scale nutrient supplementation study, copper, manganese, glucose, or water was added to switchgrass to induce production of ligninolytic enzymes by P. ostreatus. After 40 d, ligninolytic enzyme activities and biomass composition were determined and simultaneous saccharification and fermentation (SSF) was conducted to determine ethanol yield. Laccase activity was similar for all supplements and manganese peroxidase (MnP) activity was significantly less in copper-treated samples than in the other fungal-inoculated samples. The fungal pretreatment reduced glucan, xylan, and lignin content, while increasing extractable sugars content. The lowest lignin contents occurred in the water-fungal treated samples and produced the greatest ethanol yields. The greatest lignin contents occurred in the copper-fungal treated samples and produced the lowest ethanol yields. Manganese-fungal and glucose-fungal treated samples had similar, intermediate lignin contents and produced similar, intermediate ethanol yields. Ethanol yields from switchgrass

  13. Optimal sampling schemes applied in geology

    CSIR Research Space (South Africa)

    Debba, Pravesh

    2010-05-01

    Full Text Available the noise [16]. Both figures clearly show the presence/absence of chlorophyll absorption near 680 nm in the healthy and dead lodge- pole pine spectra, respectively. Although the red edge [13, 16], the steep spectral transition zone between... that are under stress and ultimately die. Imaging spectrometry yields important information on tree conditions and on the presence of dead vegetative material. The spatial and temporal extent of the dead and stressed tree areas were mapped using AVIRIS data...

  14. Perry's Intellectual Scheme.

    Science.gov (United States)

    Love, Patrick G.; Guthrie, Victoria L.

    1999-01-01

    Summarizes William Perry's intellectual scheme and places it in the context of the 1990's. Perry's scheme of cognitive development, though more than thirty years old, is still being used by practitioners today to enhance practice in and out of the classroom. It laid a foundation for new research to extend, challenge, and build onto the scheme.…

  15. Finite Boltzmann schemes

    NARCIS (Netherlands)

    Sman, van der R.G.M.

    2006-01-01

    In the special case of relaxation parameter = 1 lattice Boltzmann schemes for (convection) diffusion and fluid flow are equivalent to finite difference/volume (FD) schemes, and are thus coined finite Boltzmann (FB) schemes. We show that the equivalence is inherent to the homology of the

  16. Sequential injection/bead injection lab-on-valve schemes for on-line solid phase extraction and preconcentration of ultra-trace levels of heavy metals with determination by ETAAS and ICPMS

    DEFF Research Database (Denmark)

    Wang, Jianhua; Hansen, Elo Harald; Miró, Manuel

    2003-01-01

    are focused on the applications of SI-BI-LOV protocols for on-line microcolumn based solid phase extraction of ultra-trace levels of heavy metals, employing the so-called renewable surface separation and preconcentration manipulatory scheme. Two types of sorbents have been employed as packing material......This communication presents an overview of the state-of-the-art of the exploitation of sequential injection (SI)-bead injection (BI)-lab-on-valve (LOV) schemes for automatic on-line sample pre-treatments interfaced with ETAAS and ICPMS detection as conducted in the authors' group. The discussions...

  17. SEM analysis of weathered grains: Pretreatment effects

    Science.gov (United States)

    Cremeens, D. L.; Darmody, R. G.; Jansen, I. J.

    1987-05-01

    Fresh microcline, albite, and almandine, along with soil grains, were treated with various traditional pretreatments prior to observation with scanning electron microscopy (SEM). The grains were observed with SEM and given ratings for each of several surface properties to determine which pretreatments produced clean surfaces on soil grains without laboratory-induced damage on the fresh mineral grains. Gentle overnight shaking in 2% sodium bicarbonate at pH 9.5 produced the most effective cleaning of soil grains with the least amount of induced damage to fresh mineral samples. This pretreatment was equivalent to that given the control samples (shaken overnight in distilled water) for observations of etch pits on fresh mineral samples within a 25% equivalence (or negligible difference) interval. Ultrasonification, hydrogen peroxide, and boiling hydrochloric acid caused the most damage to mineral samples, mainly in the form of 0.5-μm etch pits. Boiling hydrochloric acid, boiling nitric acid, and stannous chloride resulted in increased coated surfaces on soil grains.

  18. Lignocellulosic Biomass Pretreatment Using AFEX

    Science.gov (United States)

    Balan, Venkatesh; Bals, Bryan; Chundawat, Shishir P. S.; Marshall, Derek; Dale, Bruce E.

    Although cellulose is the most abundant organic molecule, its susceptibility to hydrolysis is restricted due to the rigid lignin and hemicellulose protection surrounding the cellulose micro fibrils. Therefore, an effective pretreatment is necessary to liberate the cellulose from the lignin-hemicellulose seal and also reduce cellulosic crystallinity. Some of the available pretreatment techniques include acid hydrolysis, steam explosion, ammonia fiber expansion (AFEX), alkaline wet oxidation, and hot water pretreatment. Besides reducing lignocellulosic recalcitrance, an ideal pretreatment must also minimize formation of degradation products that inhibit subsequent hydrolysis and fermentation. AFEX is an important pretreatment technology that utilizes both physical (high temperature and pressure) and chemical (ammonia) processes to achieve effective pretreatment. Besides increasing the surface accessibility for hydrolysis, AFEX promotes cellulose decrystallization and partial hemicellulose depolymerization and reduces the lignin recalcitrance in the treated biomass. Theoretical glucose yield upon optimal enzymatic hydrolysis on AFEX-treated corn stover is approximately 98%. Furthermore, AFEX offers several unique advantages over other pretreatments, which include near complete recovery of the pretreatment chemical (ammonia), nutrient addition for microbial growth through the remaining ammonia on pretreated biomass, and not requiring a washing step during the process which facilitates high solid loading hydrolysis. This chapter provides a detailed practical procedure to perform AFEX, design the reactor, determine the mass balances, and conduct the process safely.

  19. Effect of nitrogen oxide pretreatments on enzymatic hydrolysis of cellulose

    Energy Technology Data Exchange (ETDEWEB)

    Borrevik, R.K.; Wilke, C.R.; Brink, D.L.

    1978-09-01

    This work considers the effect of nitrogen oxide pretreatments on the subsequent enzymatic hydrolysis by Trichoderma viride cellulase of the cellulose occurring in wheat straw; Triticum Aestivum-L, em. Thell. In the pretreatment scheme the straw is first reacted with nitric oxide and air, and then extracted in aqueous solution. In this way, overall sugar yields increased from 17% for the case of no pretreatment to 70%. The glucose yield increased from 20 to 60%. The yield of glucose during enzymatic hydrolysis is dependent on the reaction time of the gas phase reaction. For a 24 hour reaction the yield is 60%, but drops to 45% for a reaction time of 2 hours. Xylose, a potentially valuable side product of the pretreatment, is obtained by dilute acid hydrolysis during the extraction stage in yields of 90 to 96%. In acidic media, the kinetics of both the rate of formation and destruction of xylose were found to follow the first-order rate laws reported in the literature. These were determined to be 4.5 (liter/gmole)(hr./sup -1/) and 0.03 hr./sup -1/, respectively. However, the rate of formation is much greater (20.4 (liter/gmole) (hr./sup -1/)) when the extraction liquor is recycled. The most likely explanation for this is that the increased total acidity of the recycled liquor compensates for diffusional limitations. A preliminary design and cost analysis of the pretreatment-hydrolysis scheme indicates that glucose can be produced at 10.86 cents per pound, exclusive of straw cost. The corresponding cost per pound of total sugars produced is 5.0 cents. Sensitivity analyses indicate that 42% of the pretreatment cost (excluding hydrolysis) can be attributed to nitric oxide production, and the high yield of sugar obtained is advantageous when considering the cost of straw.

  20. The Mawala irrigation scheme

    OpenAIRE

    de Bont, Chris

    2018-01-01

    This booklet was written to share research results with farmers and practitioners in Tanzania. It gives a summary of the empirical material collected during three months of field work in the Mawala irrigation scheme (Kilimanjaro Region), and includes maps, tables and photos. It describes the history of the irrigation scheme, as well current irrigation and farming practices. It especially focuses on the different kinds of infrastructural improvement in the scheme (by farmers and the government...

  1. The characteristic changes of betung bamboo (Dendrocalamus asper pretreated by fungal pretreatment

    Directory of Open Access Journals (Sweden)

    Widya Fatriasari

    2014-05-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 The fungal pretreatment effect on chemical structural and morphological changes of Betung Bamboo was evaluated based on its biomass components after being cultivated by white rot fungi, Trametes versicolor. Betung bamboo powder (15 g was exposed to liquid inoculum of white rot fungi and incubated at 270C for 15, 30 and 45 days. The treated samples were then characterized by FT-IR spectroscopy, X-Ray diffraction and SEM-EDS analyses. Cultivation for 30 days with 5 and 10% loadings retained greater selectivity compared to that of the other treatments. FTIR spectra demonstrated that the fungus affected the decreasing of functional group quantities without changing the functional groups. The decrease in intensity at wave number of 1246 cm-1 (guaiacyl of lignin was greater than that at wave number of 1328 cm-1 (deformation combination of syringyl and xylan after fungal treatment. X-ray analysis showed the pretreated samples had a higher crystallinity than the untreated ones which might be due to the cleavage of amorphous fractions of cellulose. The pretreated samples have more fragile than the untreated ones confirmed by SEM. Crystalline allomorph calculated by XRD analysis showed that fungus pretreatment for 30 days has transformed triclinic structure of cellulose to monoclinic structure.

  2. Implementation of suitable flow injection/sequential-sample separation/preconcentration schemes for determination of trace metal concentrations using detection by electrothermal atomic absorption spectrometry and inductively coupled plasma mass spectrometry

    DEFF Research Database (Denmark)

    Hansen, Elo Harald; Wang, Jianhua

    2002-01-01

    Various preconditioning procedures encomprising appropriate separation/preconcentration schemes in order to obtain optimal sensitivity and selectivity characteristics when using electrothermal atomic absorption spectrometry (ETAAS) and inductively coupled plasma mass spectrometry (ICPMS...

  3. Towards Symbolic Encryption Schemes

    DEFF Research Database (Denmark)

    Ahmed, Naveed; Jensen, Christian D.; Zenner, Erik

    2012-01-01

    , namely an authenticated encryption scheme that is secure under chosen ciphertext attack. Therefore, many reasonable encryption schemes, such as AES in the CBC or CFB mode, are not among the implementation options. In this paper, we report new attacks on CBC and CFB based implementations of the well...

  4. Multiresolution signal decomposition schemes

    NARCIS (Netherlands)

    J. Goutsias (John); H.J.A.M. Heijmans (Henk)

    1998-01-01

    textabstract[PNA-R9810] Interest in multiresolution techniques for signal processing and analysis is increasing steadily. An important instance of such a technique is the so-called pyramid decomposition scheme. This report proposes a general axiomatic pyramid decomposition scheme for signal analysis

  5. Adaptive protection scheme

    Directory of Open Access Journals (Sweden)

    R. Sitharthan

    2016-09-01

    Full Text Available This paper aims at modelling an electronically coupled distributed energy resource with an adaptive protection scheme. The electronically coupled distributed energy resource is a microgrid framework formed by coupling the renewable energy source electronically. Further, the proposed adaptive protection scheme provides a suitable protection to the microgrid for various fault conditions irrespective of the operating mode of the microgrid: namely, grid connected mode and islanded mode. The outstanding aspect of the developed adaptive protection scheme is that it monitors the microgrid and instantly updates relay fault current according to the variations that occur in the system. The proposed adaptive protection scheme also employs auto reclosures, through which the proposed adaptive protection scheme recovers faster from the fault and thereby increases the consistency of the microgrid. The effectiveness of the proposed adaptive protection is studied through the time domain simulations carried out in the PSCAD⧹EMTDC software environment.

  6. Mechanism of waste biomass pyrolysis: Effect of physical and chemical pre-treatments

    Energy Technology Data Exchange (ETDEWEB)

    Das, Oisik [Department of Biological Systems Engineering, Washington State University, Pullman 99164-6120, WA (United States); Department of Civil and Environmental Engineering, University of Auckland, Auckland 1142 (New Zealand); Sarmah, Ajit K., E-mail: a.sarmah@auckland.ac.nz [Department of Civil and Environmental Engineering, University of Auckland, Auckland 1142 (New Zealand)

    2015-12-15

    To impart usability in waste based biomass through thermo-chemical reactions, several physical and chemical pre-treatments were conducted to gain an insight on their mode of action, effect on the chemistry and the change in thermal degradation profiles. Two different waste biomasses (Douglas fir, a softwood and hybrid poplar, a hardwood) were subjected to four different pre-treatments, namely, hot water pre-treatment, torrefaction, acid (sulphuric acid) and salt (ammonium phosphate) doping. Post pre-treatments, the changes in the biomass structure, chemistry, and thermal makeup were studied through electron microscopy, atomic absorption/ultra violet spectroscopy, ion exchange chromatography, and thermogravimetry. The pre-treatments significantly reduced the amounts of inorganic ash, extractives, metals, and hemicellulose from both the biomass samples. Furthermore, hot water and torrefaction pre-treatment caused mechanical disruption in biomass fibres leading to smaller particle sizes. Torrefaction of Douglas fir wood yielded more solid product than hybrid poplar. Finally, the salt pre-treatment increased the activation energies of the biomass samples (especially Douglas fir) to a great extent. Thus, salt pre-treatment was found to bestow thermal stability in the biomass. - Highlights: • Pre-treatments reduce ash, extractives, alkalines and hemicellulose from biomass. • Torrefaction of Douglas fir yields more solid product than hybrid poplar. • Salt pretreatment significantly increases the activation energy of biomass. • Acid and salt pretreatment bestows thermal stability in biomass.

  7. Diagnostic accuracy of a standardized scheme for identification of Streptococcus uberis in quarter milk samples: A comparison between conventional bacteriological examination, modified Rambach agar medium culturing, and 16S rRNA gene sequencing.

    Science.gov (United States)

    Wald, Regina; Baumgartner, Martina; Urbantke, Verena; Stessl, Beatrix; Wittek, Thomas

    2017-02-01

    Bacteriological examination of milk samples is a prerequisite for pathogen-specific therapy and aids in limiting antimicrobial resistance. The aims of this study were to establish a standardized scheme for reliable Streptococcus uberis identification in routine diagnosis and to evaluate the accuracy of conventional tests and growing patterns of Strep. uberis on a selective medium (modified Rambach agar medium, MRAM) using 16S rRNA gene sequencing analysis as a reference method. We obtained isolates of presumptive Strep. uberis (n = 336) from quarter milk samples of dairy cows with intramammary infections and classified the isolates into 2 clusters using biochemical characterization. In cluster 1 (n = 280), cocci grew as non-hemolytic colonies, hydrolyzing esculin, carrying no Lancefield antigen (A/B/C/D/G) or Christie Atkins Munch-Petersen factor, and their growth was inhibited on an Enterococcus agar. Production of β-d-galactosidase on MRAM was shown by 257 of the cluster 1 isolates (91.79%), and 16S rRNA gene sequencing verified 271 (96.79%) of the isolates to be Strep. uberis. In 264 isolates (94.29%), MRAM agreed with the sequencing results. In cluster 2 (n = 56), isolates showed different characteristics: 37 (66.07%) were β-d-galactosidase-positive, and based on 16S sequencing results, 36 (64.29%) were identified correctly as Strep. uberis using biochemical methods. Identification success in this group differed significantly between routine diagnosis and MRAM application: MRAM agreed with sequencing results in 47 isolates (83.93%). To identify Strep. uberis and differentiate it from other lactic acid bacteria in routine diagnosis, we suggest using catalase reaction, hemolysis, esculin hydrolysis, and growth on enterococci agar. Isolates that show a typical biochemical profile can be identified satisfactorily with these tests. For Strep. uberis isolates with divergent patterns, application of MRAM as a follow-up test increased the diagnostic accuracy to 94

  8. Succesful labelling schemes

    DEFF Research Database (Denmark)

    Juhl, Hans Jørn; Stacey, Julia

    2001-01-01

    It is usual practice to evaluate the success of a labelling scheme by looking at the awareness percentage, but in many cases this is not sufficient. The awareness percentage gives no indication of which of the consumer segments that are aware of and use labelling schemes and which do not....... In the spring of 2001 MAPP carried out an extensive consumer study with special emphasis on the Nordic environmentally friendly label 'the swan'. The purpose was to find out how much consumers actually know and use various labelling schemes. 869 households were contacted and asked to fill in a questionnaire....... 664 households returned a completed questionnaire. There were five answering categories for each label in the questionnaire: * have not seen the label before. * I have seen the label before but I do not know the precise contents of the labelling scheme. * I have seen the label before, I do not know...

  9. Tabled Execution in Scheme

    Energy Technology Data Exchange (ETDEWEB)

    Willcock, J J; Lumsdaine, A; Quinlan, D J

    2008-08-19

    Tabled execution is a generalization of memorization developed by the logic programming community. It not only saves results from tabled predicates, but also stores the set of currently active calls to them; tabled execution can thus provide meaningful semantics for programs that seemingly contain infinite recursions with the same arguments. In logic programming, tabled execution is used for many purposes, both for improving the efficiency of programs, and making tasks simpler and more direct to express than with normal logic programs. However, tabled execution is only infrequently applied in mainstream functional languages such as Scheme. We demonstrate an elegant implementation of tabled execution in Scheme, using a mix of continuation-passing style and mutable data. We also show the use of tabled execution in Scheme for a problem in formal language and automata theory, demonstrating that tabled execution can be a valuable tool for Scheme users.

  10. Alkaline pretreatment of Mexican pine residues for bioethanol ...

    African Journals Online (AJOL)

    The locally sourced residue samples of Pinus arizonica, Pinus cooperi, and Pinus durangensis from the state of Durango in Mexico were analyzed for optimal yield of ethanol production. The samples were mixed at an equal proportion using a particle size of 0.59 mm. Each individual mixture was pretreated with either ...

  11. White-rot fungi pretreatment combined with alkaline/oxidative pretreatment to improve enzymatic saccharification of industrial hemp.

    Science.gov (United States)

    Xie, Chunliang; Gong, Wenbing; Yang, Qi; Zhu, Zuohua; Yan, Li; Hu, Zhenxiu; Peng, Yuande

    2017-11-01

    White-rot fungi combined with alkaline/oxidative (A/O) pretreatments of industrial hemp woody core were proposed to improve enzymatic saccharification. In this study, hemp woody core were treated with only white rot fungi, only A/O and combined with the two methods. The results showed that Pleurotus eryngii (P. eryngii) was the most effective fungus for pretreatment. Reducing sugars yield was 329mg/g with 30 Filter Paper Unit (FPU)/g cellulase loading when treated 21day. In the A/O groups, the results showed that when treated with 3% NaOH and 3% H2O2, the yield of reducing sugars was 288mg/g with 30FPU/g cellulase loading. After combination pretreatment with P. eryngii and A/O pretreatment, the reducing sugar yield from enzymatic hydrolysis of combined sample increased 1.10-1.29-fold than that of bio-treated or A/O pretreatment sample at the same conditions, suggesting that P. eryngii combined with A/O pretreatment was an effective method to improve enzyme hydrolysis. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Readout scheme of the upgraded ALICE TPC

    CERN Document Server

    Appelshaeuser, Harald; Ivanov, Marian; Lippmann, Christian; Wiechula, Jens

    2016-01-01

    In this document, we present the updated readout scheme for the ALICE TPC Upgrade. Two major design changes are implemented with respect to the concept that was presented in the TPC Upgrade Technical Design Report: – The SAMPA front-end ASIC will be used in direct readout mode. – The ADC sampling frequency will be reduced from 10 to 5 MHz. The main results from simulations and a description of the new readout scheme is outlined.

  13. Processes for pretreating lignocellulosic biomass: A review

    Energy Technology Data Exchange (ETDEWEB)

    McMillan, J.D.

    1992-11-01

    This paper reviews existing and proposed pretreatment processes for biomass. The focus is on the mechanisms by which the various pretreatments act and the influence of biomass structure and composition on the efficacy of particular pretreatment techniques. This analysis is used to identify pretreatment technologies and issues that warrant further research.

  14. Anaerobic digestion of yard waste with hydrothermal pretreatment.

    Science.gov (United States)

    Li, Wangliang; Zhang, Guangyi; Zhang, Zhikai; Xu, Guangwen

    2014-03-01

    The digestibility of lignocellulosic biomass is limited by its high content of refractory components. The objective of this study is to investigate hydrothermal pretreatment and its effects on anaerobic digestion of sorted organic waste with submerged fermentation. Hydrothermal pretreatment (HT) was performed prior to anaerobic digestion, and three agents were examined for the HT: hot compressed water, alkaline solution, and acidic solution. The concentrations of glucose and xylose were the highest in the sample pretreated in acidic solution. Compared with that of the untreated sample, the biogas yields from digesting the samples pretreated in alkaline solution, acidic solution, and hot water increased by 364, 107, and 79%, respectively. The decrease of chemical oxygen demand (COD) in liquid phase followed the same order as for the biogas yield. The initial ammonia content of the treated samples followed the order sample treated in acidic solution > sample treated in alkaline solution > sample treated in hot water. The concentrations of volatile fatty acids (VFAs) were low, indicating that the anaerobic digestion process was running at continuously stable conditions.

  15. TWRS tank waste pretreatment process development hot test siting report

    Energy Technology Data Exchange (ETDEWEB)

    Howden, G.F.; Banning, D.L.; Dodd, D.A.; Smith, D.A.; Stevens, P.F. [Westinghouse Hanford Co., Richland, WA (United States); Hansen, R.I.; Reynolds, B.A. [Pacific Northwest Lab., Richland, WA (United States)

    1995-02-01

    This report is the sixth in a series that have assessed the hot testing requirements for TWRS pretreatment process development and identified the hot testing support requirements. This report, based on the previous work, identifies specific hot test work packages, matches those packages to specific hot cell facilities, and provides recommendations of specific facilities to be employed for the pretreatment hot test work. Also identified are serious limitations in the tank waste sample retrieval and handling infrastructure. Recommendations are provided for staged development of 500 mL, 3 L, 25 L and 4000 L sample recovery systems and specific actions to provide those capabilities.

  16. Compact Spreader Schemes

    Energy Technology Data Exchange (ETDEWEB)

    Placidi, M.; Jung, J. -Y.; Ratti, A.; Sun, C.

    2014-07-25

    This paper describes beam distribution schemes adopting a novel implementation based on low amplitude vertical deflections combined with horizontal ones generated by Lambertson-type septum magnets. This scheme offers substantial compactness in the longitudinal layouts of the beam lines and increased flexibility for beam delivery of multiple beam lines on a shot-to-shot basis. Fast kickers (FK) or transverse electric field RF Deflectors (RFD) provide the low amplitude deflections. Initially proposed at the Stanford Linear Accelerator Center (SLAC) as tools for beam diagnostics and more recently adopted for multiline beam pattern schemes, RFDs offer repetition capabilities and a likely better amplitude reproducibility when compared to FKs, which, in turn, offer more modest financial involvements both in construction and operation. Both solutions represent an ideal approach for the design of compact beam distribution systems resulting in space and cost savings while preserving flexibility and beam quality.

  17. Effect of Kraft Pulping Pretreatment on the Chemical Composition, Enzymatic Digestibility, and Sugar Release of Moso Bamboo Residues

    OpenAIRE

    Caoxing Huang; Qiulu Chu; Yihui Xie; Xin Li; Yongcan Jin;; Douyong Min; Qiang Yong

    2014-01-01

    In this work, kraft pulping was carried out on moso bamboo residues as a pretreatment and its impact on the chemical compositions and the digestibility of the sample was investigated. Meanwhile, steam explosion and sulfuric acid pretreatments were also carried out on the sample to determine their impacts on enzymatic saccharification. Results showed that kraft pulping pretreatment removed a significant amount of lignin from the sample, and its enzymatic saccharification was enhanced. Approxim...

  18. 4. Payment Schemes

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 2. Electronic Commerce - Payment Schemes. V Rajaraman. Series Article Volume 6 Issue 2 February 2001 pp 6-13. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/006/02/0006-0013 ...

  19. Alternative health insurance schemes

    DEFF Research Database (Denmark)

    Keiding, Hans; Hansen, Bodil O.

    2002-01-01

    In this paper, we present a simple model of health insurance with asymmetric information, where we compare two alternative ways of organizing the insurance market. Either as a competitive insurance market, where some risks remain uninsured, or as a compulsory scheme, where however, the level...... competitive insurance; this situation turns out to be at least as good as either of the alternatives...

  20. MIT Scheme Reference Manual

    Science.gov (United States)

    1991-01-01

    their Butterfly Scheme Reference, and to Margaret O’Connell for translating it from BBN’s text-formatting language to ours. Special thanks to Richard ... Stallman , Bob Chassell, and Brian Fox, all of the Free Software Foundation, for creating and maintaining the Texinfo formatting language in which this

  1. Adsorção e dessorção de cádmio, cobre e chumbo por amostras de Latossolos pré-tratadas com fósforo Cadmium, copper, and lead adsorption and desorption in Oxisol samples pre-treated with phophorus

    Directory of Open Access Journals (Sweden)

    M. A. P. Pierangeli

    2004-04-01

    Full Text Available O movimento de elementos-traço nos solos está intimamente associado aos fatores que contribuem para sua retenção na fase sólida; dentre esses fatores, destaca-se a presença de ânions adsorvidos. Neste trabalho, avaliou-se o efeito do pré-tratamento do solo com P sobre a adsorção e dessorção de Cd, Cu e Pb em amostras dos horizontes A e B de dois solos: Latossolo Vermelho-Amarelo ácrico típico (LVAw e Latossolo Vermelho ácrico típico (LVw. O pré-tratamento com P consistiu na reação das amostras de solo, durante 72 h, com Ca(H2PO42.H2 O 10,75 mmol L-1 (relação solo:solução de 1:1,5. Para a adsorção dos metais, amostras de solo tratadas e não tratadas com P foram inicialmente pré-equilibradas com Ca(NO32 5 mmol L-1 (relação solo:solução 1:67, pH 5,5 e colocadas para reagir, individualmente, com Cu(NO32, Cd(NO32 ou Pb(NO32 na concentração de 0,45 mmol L-1 (relação solo:solução final 1:100. O pré-tratamento com P aumentou a adsorção de todos os metais, com maior incremento nas amostras dos horizontes B. O aumento da adsorção com o tratamento com P indica que a presença de P nesses solos contribui para reduzir a disponibilidade dos metais Cd, Cu e Pb. A quantidade adsorvida segue a seqüência Pb > Cu >> Cd. Com relação à fração de metal dessorvida (metal dessorvido/metal adsorvido , esta foi menor nas amostras previamente tratadas com P para Pb, sendo a dessorção de Cu não influenciada pelo tratamento com P.The movement of trace elements in soils is closely related to factors that contribute to their retention in the solid phase, for instance adsorbed anions. In the present work, it was evaluated the effect of phosphorus (P pre-treatment on adsorption and desorption of Cd, Cu, and Pb in A and B horizon samples of two Latosol (Oxisols: a Yellow-Red Latosol and a Dark-Red Latosol. The P pre-treatment consisted of reacting soils samples for 72 h with 10.75 mmol L-1 Ca(H2PO42.H2 O (soil:solution ratio of

  2. Assessment of ultrasound-assisted extraction as sample pre-treatment for the measurement of lead isotope ratios in marine biological tissues by multicollector inductively coupled plasma-mass spectrometry

    Science.gov (United States)

    Costas-Rodríguez, M.; Lavilla, Isela; Bendicho, Carlos

    2011-06-01

    In this work, ultrasound-assisted extraction (UAE) was evaluated as a sample preparation procedure for lead isotope ratio measurements in marine biological tissues by multicollector inductively coupled plasma-mass spectrometry. 20 mg of marine biological tissue and 1 mL of acid extractant were sonicated for 3 min at 60% ultrasound amplitude. Matrix separation was performed in the supernatant using a chromatographic exchange resin (Sr-Spec™). Total elimination of organic matter was achieved during the separation step. Microwave-assisted digestion and dry-ashing were used for comparative purposes. No significant differences were found in lead isotope ratios at 95% of confidence level. UAE emerges as an advantageous alternative to classical methods for sample preparation owing to its simplicity and rapidity ( i.e. operation steps were reduced), low reagent consumption and low contamination risks.

  3. Overestimation of the Legionella spp. load in environmental samples by quantitative real-time PCR: pretreatment with propidium monoazide as a tool for the assessment of an association between Legionella concentration and sanitary risk.

    Science.gov (United States)

    Ditommaso, Savina; Ricciardi, Elisa; Giacomuzzi, Monica; Arauco Rivera, Susan R; Ceccarelli, Adriano; Zotti, Carla M

    2014-12-01

    Quantitative polymerase chain reaction (qPCR) offers rapid, sensitive, and specific detection of Legionella in environmental water samples. In this study, qPCR and qPCR combined with propidium monoazide (PMA-qPCR) were both applied to hot-water system samples and compared to traditional culture techniques. In addition, we evaluated the ability of PMA-qPCR to monitor the efficacy of different disinfection strategies. Comparison between the quantification obtained by culture and by qPCR or PMA-qPCR on environmental water samples confirms that the concentration of Legionella estimated by GU/L is generally higher than that estimated in CFU/L. Our results on 57 hot-water-system samples collected from 3 different sites show that: i) qPCR results were on average 178-fold higher than the culture results (Δ log10=2.25), ii) PMA-qPCR results were on average 27-fold higher than the culture results (Δ log10=1.43), iii) propidium monoazide-induced signal reduction in qPCR were nearly 10-fold (Δ log10=0.95), and that iv) different degrees of correlations between the 3 methods might be explained by different matrix properties, but also by different disinfection methods affecting cultivability of Legionella. In our study, we calculated the logarithmic differences between the results obtained by PMA-qPCR and those obtained by culture, and we suggested an algorithm for the interpretation of PMA-qPCR results for the routine monitoring of healthcare water systems using a commercial qPCR system (iQ-check real-time PCR kit; Bio-Rad, Marnes-la-Coquette, France). Copyright © 2014 Elsevier Inc. All rights reserved.

  4. Novel fungal consortium pretreatment of waste oat straw to enhance economic and efficient biohydrogen production

    Directory of Open Access Journals (Sweden)

    Lirong Zhou

    2016-12-01

    Full Text Available Bio-pretreatment using a fungal consortium to enhance the efficiency of lignocellulosic biohydrogen production was explored.  A fungal consortium comprised of T. viride and P. chrysosporium as microbial inoculum was compared with untreated and single-species-inoculated samples. Fungal bio-pretreatment was carried out at atmospheric conditions with limited external energy input.  The effectiveness of the pretreatment is evaluated according to its lignin removal and digestibility. Enhancement of biohydrogen production is observed through scanning electron microscopy (SEM analysis. Fungal consortium pretreatment effectively degraded oat straw lignin (by >47% in 7 days leading to decomposition of cell-wall structure as revealed in SEM images, increasing biohydrogen yield. The hydrogen produced from the fungal consortium pretreated straw increased by 165% 6 days later, and was more than produced from either a single fungi species of T. viride or P. chrysosponium pretreated straw (94% and 106%, respectively. No inhibitory effect on hydrogen production was observed.

  5. Fundamental characteristics of microwave explosion pretreatment of wood. I, Properties of temperature development

    Science.gov (United States)

    Xian-jun Li; Ke-yang Lu; Lan-ying Lin; Yong-dong Zhou; Zhi-yong Cai; Feng Fu

    2010-01-01

    In this study, the effects of microwave radiation intensity, radiation time and initial wood moisture content (MC) on the properties of temperature development in Eucalyptus urophylla wood samples during the microwave explosion pretreatment have been investigated using a new microwave pretreatment equipment. The results show that 1) with the increase of microwave...

  6. Evaluation of ultrasound-assisted extraction as sample pre-treatment for quantitative determination of rare earth elements in marine biological tissues by inductively coupled plasma-mass spectrometry.

    Science.gov (United States)

    Costas, M; Lavilla, I; Gil, S; Pena, F; de la Calle, I; Cabaleiro, N; Bendicho, C

    2010-10-29

    In this work, the determination of rare earth elements (REEs), i.e. Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu in marine biological tissues by inductively coupled-mass spectrometry (ICP-MS) after a sample preparation method based on ultrasound-assisted extraction (UAE) is described. The suitability of the extracts for ICP-MS measurements was evaluated. For that, studies were focused on the following issues: (i) use of clean up of extracts with a C18 cartridge for non-polar solid phase extraction; (ii) use of different internal standards; (iii) signal drift caused by changes in the nebulization efficiency and salt deposition on the cones during the analysis. The signal drift produced by direct introduction of biological extracts in the instrument was evaluated using a calibration verification standard for bracketing (standard-sample bracketing, SSB) and cumulative sum (CUSUM) control charts. Parameters influencing extraction such as extractant composition, mass-to-volume ratio, particle size, sonication time and sonication amplitude were optimized. Diluted single acids (HNO(3) and HCl) and mixtures (HNO(3)+HCl) were evaluated for improving the extraction efficiency. Quantitative recoveries for REEs were achieved using 5 mL of 3% (v/v) HNO(3)+2% (v/v) HCl, particle size <200 μm, 3 min of sonication time and 50% of sonication amplitude. Precision, expressed as relative standard deviation from three independent extractions, ranged from 0.1 to 8%. In general, LODs were improved by a factor of 5 in comparison with those obtained after microwave-assisted digestion (MAD). The accuracy of the method was evaluated using the CRM BCR-668 (mussel tissue). Different seafood samples of common consumption were analyzed by ICP-MS after UAE and MAD. Copyright © 2010 Elsevier B.V. All rights reserved.

  7. 40 CFR 403.6 - National pretreatment standards: Categorical standards.

    Science.gov (United States)

    2010-07-01

    .... In its application to the Control Authority, the Industrial User must provide engineering, production... categorical Pretreatment Standards pursuant to paragraph 8 of the NRDC v. Costle Consent Decree (12 ERC 1833... Authority, the Industrial User must provide engineering, production, sampling and analysis and such other...

  8. Selectively strippable paint schemes

    Science.gov (United States)

    Stein, R.; Thumm, D.; Blackford, Roger W.

    1993-03-01

    In order to meet the requirements of more environmentally acceptable paint stripping processes many different removal methods are under evaluation. These new processes can be divided into mechanical and chemical methods. ICI has developed a paint scheme with intermediate coat and fluid resistant polyurethane topcoat which can be stripped chemically in a short period of time with methylene chloride free and phenol free paint strippers.

  9. Hydrothermal pretreatment of coal

    Energy Technology Data Exchange (ETDEWEB)

    Ross, D.S.

    1989-12-21

    We have examined changes in Argonne Premium samples of Wyodak coal following 30 min treatment in liquid water at autogenous pressures at 150{degrees}, 250{degrees}, and 350{degrees}C. In most runs the coal was initially dried at 60{degrees}C/1 torr/20 hr. The changes were monitored by pyrolysis field ionization mass spectrometry (py-FIMS) operating at 2.5{degrees}C/min from ambient to 500{degrees}C. We recorded the volatility patterns of the coal tars evolved over that temperature range, and in all cases the tar yields were 25%--30% of the starting coal on mass basis. There was essentially no change after the 150{degrees}C treatment. Small increases in volatility were seen following the 250{degrees}C treatment, but major effects were seen in the 350{degrees} work. The tar quantity remained unchanged; however, the volatility increased so the temperature of half volatility for the as-received coal of 400{degrees}C was reduced to 340{degrees}C. Control runs with no water showed some thermal effect, but the net effect from the presence of liquid water was clearly evident. The composition was unchanged after the 150{degrees} and 250{degrees}C treatments, but the 350{degrees} treatment brought about a 30% loss of oxygen. The change corresponded to loss of the elements of water, although loss of OH'' seemed to fit the analysis data somewhat better. The water loss takes place both in the presence and in the absence of added water, but it is noteworthy that the loss in the hydrothermal runs occurs at p(H{sub 2}O) = 160 atm. We conclude that the process must involve the dehydration solely of chemically bound elements of water, the dehydration of catechol is a specific, likely candidate.

  10. CANONICAL BACKWARD DIFFERENTIATION SCHEMES FOR ...

    African Journals Online (AJOL)

    CANONICAL BACKWARD DIFFERENTIATION SCHEMES FOR SOLUTION OF NONLINEAR INITIAL VALUE PROBLEMS OF FIRST ORDER ORDINARY DIFFERENTIAL EQUATIONS. ... Global Journal of Mathematical Sciences ... KEY WORDS: backward differentiation scheme, collocation, initial value problems. Global Jnl ...

  11. Nanofiltration based water reclamation from tannery effluent following coagulation pretreatment.

    Science.gov (United States)

    Dasgupta, J; Mondal, D; Chakraborty, S; Sikder, J; Curcio, S; Arafat, H A

    2015-11-01

    Coagulation-nanofiltration based integrated treatment scheme was employed in the present study to maximize the removal of toxic Cr(VI) species from tannery effluents. The coagulation pretreatment step using aluminium sulphate hexadecahydrate (alum) was optimized by response surface methodology (RSM). A nanofiltration unit was integrated with this coagulation pre-treatment unit and the resulting flux decline and permeate quality were investigated. Herein, the coagulation was conducted under response surface-optimized operating conditions. The hybrid process demonstrated high chromium(VI) removal efficiency over 98%. Besides, fouling of two of the tested nanofiltration membranes (NF1 and NF3) was relatively mitigated after feed pretreatment. Nanofiltration permeation fluxes as high as 80-100L/m(2)h were thereby obtained. The resulting permeate stream quality post nanofiltration (NF3) was found to be suitable for effective reuse in tanneries, keeping the Cr(VI) concentration (0.13mg/L), Biochemical Oxygen Demand (BOD) (65mg/L), Chemical Oxygen Demand (COD) (142mg/L), Total Dissolved Solids (TDS) (108mg/L), Total Solids (TS) (86mg/L) and conductivity levels (14mho/cm) in perspective. The process water reclaiming ability of nanofiltration was thereby substantiated and the effectiveness of the proposed hybrid system was thus affirmed. Copyright © 2015 Elsevier Inc. All rights reserved.

  12. Hydrothermal pretreatment of sugarcane bagasse using response surface methodology improves digestibility and ethanol production by SSF.

    Science.gov (United States)

    da Cruz, Sandra Helena; Dien, Bruce S; Nichols, Nancy N; Saha, Badal C; Cotta, Michael A

    2012-03-01

    Sugarcane bagasse was characterized as a feedstock for the production of ethanol using hydrothermal pretreatment. Reaction temperature and time were varied between 160 and 200°C and 5-20 min, respectively, using a response surface experimental design. The liquid fraction was analyzed for soluble carbohydrates and furan aldehydes. The solid fraction was analyzed for structural carbohydrates and Klason lignin. Pretreatment conditions were evaluated based on enzymatic extraction of glucose and xylose and conversion to ethanol using a simultaneous saccharification and fermentation scheme. SSF experiments were conducted with the washed pretreated biomass. The severity of the pretreatment should be sufficient to drive enzymatic digestion and ethanol yields, however, sugars losses and especially sugar conversion into furans needs to be minimized. As expected, furfural production increased with pretreatment severity and specifically xylose release. However, provided that the severity was kept below a general severity factor of 4.0, production of furfural was below an inhibitory concentration and carbohydrate contents were preserved in the pretreated whole hydrolysate. There were significant interactions between time and temperature for all the responses except cellulose digestion. The models were highly predictive for cellulose digestibility (R (2) = 0.8861) and for ethanol production (R (2) = 0.9581), but less so for xylose extraction. Both cellulose digestion and ethanol production increased with severity, however, high levels of furfural generated under more severe pretreatment conditions favor lower severity pretreatments. The optimal pretreatment condition that gave the highest conversion yield of ethanol, while minimizing furfural production, was judged to be 190°C and 17.2 min. The whole hydrolysate was also converted to ethanol using SSF. To reduce the concentration of inhibitors, the liquid fraction was conditioned prior to fermentation by removing

  13. Evaluation of different lignocellulosic biomass pretreatments by phenotypic microarray-based metabolic analysis of fermenting yeast

    Directory of Open Access Journals (Sweden)

    Stuart Wilkinson

    2016-03-01

    Full Text Available Advanced generation biofuel production from lignocellulosic material (LCM was investigated.  A range of different thermo-chemical pre-treatments were evaluated with different LCM. The pre-treatments included; alkaline (5% NaOH at 50°C, acid (1% H2SO4 at 121°C and autohydrolytical methods (200°C aqueous based hydrothermal and were evaluated using samples of miscanthus, wheat-straw and willow. The liberation of sugars, presence of inhibitory compounds, and the degree of enhancement of enzymatic saccharification was accessed. The suitability of the pre-treatment generated hydrolysates (as bioethanol feedstocks for Saccharomyces cerevisiae was also accessed using a phenotypic microarray that measured yeast metabolic output. The use of the alkaline pre-treatment liberated more glucose and arabinose into both the pre-treatment generated hydrolysate and also the hydrolysate produced after enzymatic hydrolysis (when compared with other pre-treatments. However, hydrolysates derived from use of alkaline pre-treatments were shown to be unsuitable as a fermentation medium due to issues with colloidal stability (high viscosity.  Use of acid or autohydrolytical pre-treatments liberated high concentrations of monosaccharides regardless of the LCM used and the hydrolysates had good fermentation performance with measurable yeast metabolic output. Acid pre-treated wheat straw hydrolysates were then used as a model system for larger scale fermentations to confirm both the results of the phenotypic microarray and its validity as an effective high-throughput screening tool.

  14. Bonus Schemes and Trading Activity

    NARCIS (Netherlands)

    Pikulina, E.S.; Renneboog, L.D.R.; Ter Horst, J.R.; Tobler, P.N.

    2013-01-01

    Abstract: Little is known about how different bonus schemes affect traders’ propensity to trade and which bonus schemes improve traders’ performance. We study the effects of linear versus threshold (convex) bonus schemes on traders’ behavior. Traders purchase and sell shares in an experimental stock

  15. Bonus schemes and trading activity

    NARCIS (Netherlands)

    Pikulina, E.S.; Renneboog, L.D.R.; ter Horst, J.R.; Tobler, P.N.

    2014-01-01

    Little is known about how different bonus schemes affect traders' propensity to trade and which bonus schemes improve traders' performance. We study the effects of linear versus threshold bonus schemes on traders' behavior. Traders buy and sell shares in an experimental stock market on the basis of

  16. Enhancement of drying and rehydration characteristics of okra by ultrasound pre-treatment application

    Science.gov (United States)

    Tüfekçi, Senem; Özkal, Sami Gökhan

    2017-07-01

    Effect of ultrasound application prior to hot air drying on drying and rehydration kinetics, rehydration ratio and microstructure of okra slices were investigated. For this purpose, the selected parameters are ultrasound pre-treatment time (10, 20 and 30 min), ultrasound amplitude (55 and 100%) and the temperature of drying air (60 and 70 °C). 5 mm thick cylindrical shaped okra slices were used in the experiments. The samples were immersed in water and ultrasonic pre-treatments were done in water with ultrasonic probe connected to an ultrasonic generator with 20 kHz frequency. Pre-treated samples were dried in a tray drier with a 0.3 m/s air velocity. Ultrasound pre-treatment affected the drying rate of the okra slices significantly. Drying time of okra slices was decreased by the application of ultrasound pre-treatment. Modified Page model found to be the most suitable model for describing the drying characteristics of okra slices. Improvements in rehydration properties of the dried samples were observed due to the ultrasound pre-treatment. The influence of the ultrasound pre-treatment on microstructure was clearly observed through scanning electron microscopy images of the dried samples. As the amplitude of ultrasound increased the changes in structure of the okra tissue increased.

  17. Method for pretreating lignocellulosic biomass

    Science.gov (United States)

    Kuzhiyil, Najeeb M.; Brown, Robert C.; Dalluge, Dustin Lee

    2015-08-18

    The present invention relates to a method for pretreating lignocellulosic biomass containing alkali and/or alkaline earth metal (AAEM). The method comprises providing a lignocellulosic biomass containing AAEM; determining the amount of the AAEM present in the lignocellulosic biomass; identifying, based on said determining, the amount of a mineral acid sufficient to completely convert the AAEM in the lignocellulosic biomass to thermally-stable, catalytically-inert salts; and treating the lignocellulosic biomass with the identified amount of the mineral acid, wherein the treated lignocellulosic biomass contains thermally-stable, catalytically inert AAEM salts.

  18. Supercritical fluids as a green technology for the pretreatment of lignocellulosic biomass.

    Science.gov (United States)

    Daza Serna, L V; Orrego Alzate, C E; Cardona Alzate, C A

    2016-01-01

    One of the main drawbacks for using lignocellulosic biomass is related to its recalcitrance. The pretreatment of lignocellulosic biomass plays an important role for delignification and crystallinity reduction purposes. In this work rice husk (RH) was submitted to supercritical pretreatment at 80°C and 270 bar with the aim to determine the effect on lignin content, crystallinity as well as enzymatic digestibility. The yields obtained were compared with dilute sulfuric acid pretreatment as base case. Additionally a techno-economic and environmental comparison of the both pretreatment technologies was performed. The results show a lignin content reduction up to 90.6% for the sample with 75% moisture content using a water-ethanol mixture. The results for crystallinity and enzymatic digestibility demonstrated that no reductions were reached. Supercritical pretreatment presents the best economical and environmental performance considering the solvents and carbon dioxide recycling. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. First steps towards a generic sample preparation scheme for inorganic engineered nanoparticles in a complex matrix for detection, characterization, and quantification by asymmetric flow-field flow fractionation coupled to multi-angle light scattering and ICP-MS

    DEFF Research Database (Denmark)

    Wagner, Stephan; Legros, Samuel; Löschner, Katrin

    2015-01-01

    The applicability of a multi-step generic procedure to systematically develop sample preparation methods for the detection, characterization, and quantification of inorganic engineered nanoparticles (ENPs) in a complex matrix was successfully demonstrated. The research focused on the optimization...... content by asymmetric flow-field flow fractionation coupled to a multi-angle light scattering detector and an inductively coupled plasma mass spectrometer. Following the proposed generic procedure SiO2-ENPs were separated from a tomato soup. Two potential sample preparation methods were tested these being...... of the sample preparation, aiming to achieve a complete separation of ENPs from a complex matrix without altering the ENP size distribution and with minimal loss of ENPs. The separated ENPs were detected and further characterized in terms of particle size distribution and quantified in terms of elemental mass...

  20. Small-scale classification schemes

    DEFF Research Database (Denmark)

    Hertzum, Morten

    2004-01-01

    Small-scale classification schemes are used extensively in the coordination of cooperative work. This study investigates the creation and use of a classification scheme for handling the system requirements during the redevelopment of a nation-wide information system. This requirements classificat....... This difference between the written requirements specification and the oral discussions at the meetings may help explain software engineers’ general preference for people, rather than documents, as their information sources.......Small-scale classification schemes are used extensively in the coordination of cooperative work. This study investigates the creation and use of a classification scheme for handling the system requirements during the redevelopment of a nation-wide information system. This requirements....... While coordination mechanisms focus on how classification schemes enable cooperation among people pursuing a common goal, boundary objects embrace the implicit consequences of classification schemes in situations involving conflicting goals. Moreover, the requirements specification focused on functional...

  1. Sample pretretment in microsystems

    DEFF Research Database (Denmark)

    Perch-Nielsen, Ivan R.

    2003-01-01

    When a sample, e.g. from a patient, is processed using conventional methods, the sample must be transported to the laboratory where it is analyzed, after which the results is sent back. By integrating the separate steps of the analysis in a micro total analysis system (μTAS), results can......: Sample preparation → DNA amplification → DNA analysis. The overall goal of the project is integration of as many as possible of these steps. This thesis covers mainly pretreatment in a microchip. Some methods for sample pretreatment have been tested. Most conventional is fluorescence activated cell sort...... be obtained fast and better. Preferably with all the processes from sample to signal moved to the bedside of the patient. Of course there is still much to learn and study in the process of miniaturization. DNA analysis is one process subject to integration. There are roughly three steps in a DNA analysis...

  2. Two notes about Ponzi schemes

    OpenAIRE

    Honohan, Patrick

    1987-01-01

    A Ponzi scheme is an arrangement whereby a promoter offers an investment opportunity with attractive dividends, but where the only basis for the dividends is the future receipts from new investors. The first of these two notes explores some of the analytical properties of a Ponzi scheme, addressing in particular the question whether it is possible for a Ponzi scheme to exist if all the participants are rational. The second note briefly examines the collapse of the PMPA insurance company whos...

  3. How chip size impacts steam pretreatment effectiveness for biological conversion of poplar wood into fermentable sugars.

    Science.gov (United States)

    DeMartini, Jaclyn D; Foston, Marcus; Meng, Xianzhi; Jung, Seokwon; Kumar, Rajeev; Ragauskas, Arthur J; Wyman, Charles E

    2015-01-01

    Woody biomass is highly recalcitrant to enzymatic sugar release and often requires significant size reduction and severe pretreatments to achieve economically viable sugar yields in biological production of sustainable fuels and chemicals. However, because mechanical size reduction of woody biomass can consume significant amounts of energy, it is desirable to minimize size reduction and instead pretreat larger wood chips prior to biological conversion. To date, however, most laboratory research has been performed on materials that are significantly smaller than applicable in a commercial setting. As a result, there is a limited understanding of the effects that larger biomass particle size has on the effectiveness of steam explosion pretreatment and subsequent enzymatic hydrolysis of wood chips. To address these concerns, novel downscaled analysis and high throughput pretreatment and hydrolysis (HTPH) were applied to examine whether differences exist in the composition and digestibility within a single pretreated wood chip due to heterogeneous pretreatment across its thickness. Heat transfer modeling, Simons' stain testing, magnetic resonance imaging (MRI), and scanning electron microscopy (SEM) were applied to probe the effects of pretreatment within and between pretreated wood samples to shed light on potential causes of variation, pointing to enzyme accessibility (i.e., pore size) distribution being a key factor dictating enzyme digestibility in these samples. Application of these techniques demonstrated that the effectiveness of pretreatment of Populus tremuloides can vary substantially over the chip thickness at short pretreatment times, resulting in spatial digestibility effects and overall lower sugar yields in subsequent enzymatic hydrolysis. These results indicate that rapid decompression pretreatments (e.g., steam explosion) that specifically alter accessibility at lower temperature conditions are well suited for larger wood chips due to the non

  4. Remarks on quantum duopoly schemes

    Science.gov (United States)

    Fraçkiewicz, Piotr

    2016-01-01

    The aim of this paper is to discuss in some detail the two different quantum schemes for duopoly problems. We investigate under what conditions one of the schemes is more reasonable than the other one. Using the Cournot's duopoly example, we show that the current quantum schemes require a slight refinement so that they output the classical game in a particular case. Then, we show how the amendment changes the way of studying the quantum games with respect to Nash equilibria. Finally, we define another scheme for the Cournot's duopoly in terms of quantum computation.

  5. New Ideas on Labeling Schemes

    DEFF Research Database (Denmark)

    Rotbart, Noy Galil

    times, effectively eliminating the second penalty mentioned. We continue this theoretical study in several ways. First, we dedicate a large part of the thesis to the graph family of trees, for which we provide an overview of labeling schemes supporting several important functions such as ancestry......, routing and especially adjacency. The survey is complemented by novel contributions to this study, among which are the first asymptotically optimal adjacency labeling scheme for bounded degree trees, improved bounds on ancestry labeling schemes, dynamic multifunctional labeling schemes and an experimental...

  6. Optimal design of sampling and mapping schemes in the radiometric exploration of Chipilapa, El Salvador (Geo-statistics); Diseno optimo de esquemas de muestreo y mapeo en la exploracion radiometrica de Chipilapa, El Salvador (Geo-estadistica)

    Energy Technology Data Exchange (ETDEWEB)

    Balcazar G, M.; Flores R, J.H

    1992-01-15

    As part of the knowledge about the radiometric surface exploration, carried out in the geothermal field of Chipilapa, El Salvador, its were considered the geo-statistical parameters starting from the calculated variogram of the field data, being that the maxim distance of correlation of the samples in 'radon' in the different observation addresses (N-S, E-W, N W-S E, N E-S W), it was of 121 mts for the monitoring grill in future prospectus in the same area. Being derived of it an optimization (minimum cost) in the spacing of the field samples by means of geo-statistical techniques, without losing the detection of the anomaly. (Author)

  7. High resolution satellite remote sensing used in a stratified random sampling scheme to quantify the constituent land cover components of the shifting cultivation mosaic of the Democratic Republic of Congo

    Science.gov (United States)

    Molinario, G.; Hansen, M.; Potapov, P.

    2016-12-01

    High resolution satellite imagery obtained from the National Geospatial Intelligence Agency through NASA was used to photo-interpret sample areas within the DRC. The area sampled is a stratifcation of the forest cover loss from circa 2014 that either occurred completely within the previosly mapped homogenous area of the Rural Complex, at it's interface with primary forest, or in isolated forest perforations. Previous research resulted in a map of these areas that contextualizes forest loss depending on where it occurs and with what spatial density, leading to a better understading of the real impacts on forest degradation of livelihood shifting cultivation. The stratified random sampling approach of these areas allows the characterization of the constituent land cover types within these areas, and their variability throughout the DRC. Shifting cultivation has a variable forest degradation footprint in the DRC depending on many factors that drive it, but it's role in forest degradation and deforestation had been disputed, leading us to investigate and quantify the clearing and reuse rates within the strata throughout the country.

  8. Pretreatment of the macroalgae Chaetomorpha linum for the production of bioethanol - Comparison of five pretreatment technologies

    DEFF Research Database (Denmark)

    Schultz-Jensen, Nadja; Thygesen, Anders; Thomsen, Sune Tjalfe

    2013-01-01

    A qualified estimate for pretreatment of the macroalgae Chaetomorpha linum for ethanol production was given, based on the experience of pretreatment of land-based biomass. C. linum was subjected to hydrothermal pretreatment (HTT), wet oxidation (WO), steam explosion (STEX), plasma-assisted pretre...

  9. A real helper data scheme

    NARCIS (Netherlands)

    Shao, X.; Veldhuis, Raymond N.J.

    2013-01-01

    The helper data scheme utilizes a secret key to protect biometric templates. The current helper data scheme requires binary feature representations that introduce quantization error and thus reduce the capacity of biometric channels. For spectral-minutiae based fingerprint recognition systems,

  10. CANONICAL BACKWARD DIFFERENTIATION SCHEMES FOR ...

    African Journals Online (AJOL)

    This paper describes a new nonlinear backward differentiation schemes for the numerical solution of nonlinear initial value problems of first order ordinary differential equations. The schemes are based on rational interpolation obtained from canonical polynomials. They are A-stable. The test problems show that they give ...

  11. External quality assessment schemes for toxicology.

    Science.gov (United States)

    Wilson, John

    2002-08-14

    A variety of external quality assurance (EQA) schemes monitor quantitative performance for routine biochemical analysis of agents such as paracetamol, salicylate, ethanol and carboxyhaemoglobin. Their usefulness for toxicologists can be lessened where the concentrations monitored do not extend fully into the toxic range or where the matrix is synthetic, of animal origin or serum as opposed to whole human blood. A scheme for quantitative determinations of a wider range of toxicological analytes such as opioids, benzodiazepines and tricyclics in human blood has been piloted by the United Kingdom National External Quality Assessment Scheme (UKNEQAS). Specialist schemes are available for drugs of abuse testing in urine and for hair analysis. Whilst these programmes provide much useful information on the performance of analytical techniques, they fail to monitor the integrated processes that are needed in investigation of toxicological cases. In practice, both qualitative and quantitative tests are used in combination with case information to guide the evaluation of the samples and to develop an interpretation of the analytical findings that is used to provide clinical or forensic advice. EQA programs that combine the analytical and interpretative aspects of case studies are available from EQA providers such as UKNEQAS and the Dutch KKGT program (Stichting Kwaliteitsbewaking Klinische Geneesmiddelanalyse en Toxicologie).

  12. Multiuser Switched Diversity Scheduling Schemes

    CERN Document Server

    Shaqfeh, Mohammad; Alouini, Mohamed-Slim

    2012-01-01

    Multiuser switched-diversity scheduling schemes were recently proposed in order to overcome the heavy feedback requirements of conventional opportunistic scheduling schemes by applying a threshold-based, distributed, and ordered scheduling mechanism. The main idea behind these schemes is that slight reduction in the prospected multiuser diversity gains is an acceptable trade-off for great savings in terms of required channel-state-information feedback messages. In this work, we characterize the achievable rate region of multiuser switched diversity systems and compare it with the rate region of full feedback multiuser diversity systems. We propose also a novel proportional fair multiuser switched-based scheduling scheme and we demonstrate that it can be optimized using a practical and distributed method to obtain the feedback thresholds. We finally demonstrate by numerical examples that switched-diversity scheduling schemes operate within 0.3 bits/sec/Hz from the ultimate network capacity of full feedback sys...

  13. Effects of pre-treatment technologies on quantity and quality of source-sorted municipal organic waste for biogas recovery

    DEFF Research Database (Denmark)

    Hansen, Trine Lund; Jansen, J.l.C.; Davidsson, Å.

    2007-01-01

    -treatment technology. The sampled reject consisted mostly of organic matter. For cities using plastic bags for the source-separated organic waste, the expected content of plastic in the reject was up to 10% wet weight (in some cases up to 20%). Batch tests for methane potential of the biomass samples showed only minor......Source-sorted municipal organic waste collected from different dwelling types in five Danish cities and pre-treated at three different plants was sampled and characterized several times during one year to investigate the origin of any differences in composition of the pre-treated waste introduced...... by city, pre-treatment technology, dwelling type or annual season. The investigated pre-treatment technologies were screw press, disc screen and shredder + magnet. The average quantity of pre-treated organic waste (biomass) produced from the incoming waste varied between the investigated pre...

  14. Improved enzymatic hydrolysis of lignocellulosic biomass through pretreatment with plasma electrolysis.

    Science.gov (United States)

    Gao, Jing; Chen, Li; Zhang, Jian; Yan, Zongcheng

    2014-11-01

    A comprehensive research on plasma electrolysis as pretreatment method for water hyacinth (WH) was performed based on lignin content, crystalline structure, surface property, and enzymatic hydrolysis. A large number of active particles, such as HO and H2O2, generated by plasma electrolysis could decompose the lignin of the biomass samples and reduce the crystalline index. An efficient pretreatment process made use of WH pretreated at a load of 48 wt% (0.15-0.18 mm) in FeCl3 solution for 30 min at 450 V. After the pretreatment, the sugar yield of WH was increased by 126.5% as compared with unpretreated samples. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Innovative pretreatment strategies for biogas production.

    Science.gov (United States)

    Patinvoh, Regina J; Osadolor, Osagie A; Chandolias, Konstantinos; Sárvári Horváth, Ilona; Taherzadeh, Mohammad J

    2017-01-01

    Biogas or biomethane is traditionally produced via anaerobic digestion, or recently by thermochemical or a combination of thermochemical and biological processes via syngas (CO and H2) fermentation. However, many of the feedstocks have recalcitrant structure and are difficult to digest (e.g., lignocelluloses or keratins), or they have toxic compounds (such as fruit flavors or high ammonia content), or not digestible at all (e.g., plastics). To overcome these challenges, innovative strategies for enhanced and economically favorable biogas production were proposed in this review. The strategies considered are commonly known physical pretreatment, rapid decompression, autohydrolysis, acid- or alkali pretreatments, solvents (e.g. for lignin or cellulose) pretreatments or leaching, supercritical, oxidative or biological pretreatments, as well as combined gasification and fermentation, integrated biogas production and pretreatment, innovative biogas digester design, co-digestion, and bio-augmentation. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Modern survey sampling

    CERN Document Server

    Chaudhuri, Arijit

    2014-01-01

    Exposure to SamplingAbstract Introduction Concepts of Population, Sample, and SamplingInitial RamificationsAbstract Introduction Sampling Design, Sampling SchemeRandom Numbers and Their Uses in Simple RandomSampling (SRS)Drawing Simple Random Samples with and withoutReplacementEstimation of Mean, Total, Ratio of Totals/Means:Variance and Variance EstimationDetermination of Sample SizesA.2 Appendix to Chapter 2 A.More on Equal Probability Sampling A.Horvitz-Thompson EstimatorA.SufficiencyA.LikelihoodA.Non-Existence Theorem More Intricacies Abstract Introduction Unequal Probability Sampling StrategiesPPS Sampling Exploring Improved WaysAbstract Introduction Stratified Sampling Cluster SamplingMulti-Stage SamplingMulti-Phase Sampling: Ratio and RegressionEstimationviiviii ContentsControlled SamplingModeling Introduction Super-Population ModelingPrediction Approach Model-Assisted Approach Bayesian Methods Spatial SmoothingSampling on Successive Occasions: Panel Rotation Non-Response and Not-at-Homes Weighting Adj...

  17. Alkaline-sulfite pretreatment and use of surfactants during enzymatic hydrolysis to enhance ethanol production from sugarcane bagasse.

    Science.gov (United States)

    Mesquita, Jéssica Faria; Ferraz, André; Aguiar, André

    2016-03-01

    Sugarcane bagasse is a by-product from the sugar and ethanol industry which contains approximately 70 % of its dry mass composed by polysaccharides. To convert these polysaccharides into fuel ethanol it is necessary a pretreatment step to increase the enzymatic digestibility of the recalcitrant raw material. In this work, sugarcane bagasse was pretreated by an alkaline-sulfite chemithermomechanical process for increasing its enzymatic digestibility. Na2SO3 and NaOH ratios were fixed at 2:1, and three increasing chemical loads, varying from 4 to 8 % m/m Na2SO3, were used to prepare the pretreated materials. The increase in the alkaline-sulfite load decreased the lignin content in the pretreated material up to 35.5 % at the highest chemical load. The pretreated samples presented enhanced glucose yields during enzymatic hydrolysis as a function of the pretreatment severity. The maximum glucose yield (64 %) was observed for the samples pretreated with the highest chemical load. The use of 2.5 g l(-1) Tween 20 in the hydrolysis step further increased the glucose yield to 75 %. Semi-simultaneous hydrolysis and fermentation of the pretreated materials indicated that the ethanol yield was also enhanced as a function of the pretreatment severity. The maximum ethanol yield was 56 ± 2 % for the sample pretreated with the highest chemical load. For the sample pretreated with the lowest chemical load (2 % m/m NaOH and 4 % m/m Na2SO3), adding Tween 20 during the hydrolysis process increased the ethanol yield from 25 ± 3 to 39.5 ± 1 %.

  18. Microwave-Assisted Alkali Pre-Treatment, Densification and Enzymatic Saccharification of Canola Straw and Oat Hull.

    Science.gov (United States)

    Agu, Obiora S; Tabil, Lope G; Dumonceaux, Tim

    2017-03-26

    The effects of microwave-assisted alkali pre-treatment on pellets' characteristics and enzymatic saccharification for bioethanol production using lignocellulosic biomass of canola straw and oat hull were investigated. The ground canola straw and oat hull were immersed in distilled water, sodium hydroxide and potassium hydroxide solutions at two concentrations (0.75% and 1.5% w/v) and exposed to microwave radiation at power level 713 W and three residence times (6, 12 and 18 min). Bulk and particle densities of ground biomass samples were determined. Alkaline-microwave pre-treated and untreated samples were subjected to single pelleting test in an Instron universal machine, pre-set to a load of 4000 N. The measured parameters, pellet density, tensile strength and dimensional stability were evaluated and the results showed that the microwave-assisted alkali pre-treated pellets had a significantly higher density and tensile strength compared to samples that were untreated or pre-treated by microwave alone. The chemical composition analysis showed that microwave-assisted alkali pre-treatment was able to disrupt and break down the lignocellulosic structure of the samples, creating an area of cellulose accessible to cellulase reactivity. The best enzymatic saccharification results gave a high glucose yield of 110.05 mg/g dry sample for canola straw ground in a 1.6 mm screen hammer mill and pre-treated with 1.5% NaOH for 18 min, and a 99.10 mg/g dry sample for oat hull ground in a 1.6 mm screen hammer mill and pre-treated with 0.75% NaOH for 18 min microwave-assisted alkali pre-treatments. The effects of pre-treatment results were supported by SEM analysis. Overall, it was found that microwave-assisted alkali pre-treatment of canola straw and oat hull at a short residence time enhanced glucose yield.

  19. Fast Pyrolysis of Tropical Biomass Species and Influence of Water Pretreatment on Product Distributions

    Science.gov (United States)

    Morgan, Trevor James; Turn, Scott Q.; Sun, Ning; George, Anthe

    2016-01-01

    The fast pyrolysis behaviour of pretreated banagrass was examined at four temperatures (between 400 and 600 C) and four residence times (between ~1.2 and 12 s). The pretreatment used water washing/leaching to reduce the inorganic content of the banagrass. Yields of bio-oil, permanent gases and char were determined at each reaction condition and compared to previously published results from untreated banagrass. Comparing the bio-oil yields from the untreated and pretreated banagrass shows that the yields were greater from the pretreated banagrass by 4 to 11 wt% (absolute) at all reaction conditions. The effect of pretreatment (i.e. reducing the amount of ash, and alkali and alkali earth metals) on pyrolysis products is: 1) to increase the dry bio-oil yield, 2) to decrease the amount of undetected material, 3) to produce a slight increase in CO yield or no change, 4) to slightly decrease CO2 yield or no change, and 5) to produce a more stable bio-oil (less aging). Char yield and total gas yield were unaffected by feedstock pretreatment. Four other tropical biomass species were also pyrolyzed under one condition (450°C and 1.4 s residence time) for comparison to the banagrass results. The samples include two hardwoods: leucaena and eucalyptus, and two grasses: sugarcane bagasse and energy-cane. A sample of pretreated energy-cane was also pyrolyzed. Of the materials tested, the best feedstocks for fast pyrolysis were sugarcane bagasse, pretreated energy cane and eucalyptus based on the yields of 'dry bio-oil', CO and CO2. On the same basis, the least productive feedstocks are untreated banagrass followed by pretreated banagrass and leucaena. PMID:26978265

  20. Fast Pyrolysis of Tropical Biomass Species and Influence of Water Pretreatment on Product Distributions.

    Directory of Open Access Journals (Sweden)

    Trevor James Morgan

    Full Text Available The fast pyrolysis behaviour of pretreated banagrass was examined at four temperatures (between 400 and 600 C and four residence times (between ~1.2 and 12 s. The pretreatment used water washing/leaching to reduce the inorganic content of the banagrass. Yields of bio-oil, permanent gases and char were determined at each reaction condition and compared to previously published results from untreated banagrass. Comparing the bio-oil yields from the untreated and pretreated banagrass shows that the yields were greater from the pretreated banagrass by 4 to 11 wt% (absolute at all reaction conditions. The effect of pretreatment (i.e. reducing the amount of ash, and alkali and alkali earth metals on pyrolysis products is: 1 to increase the dry bio-oil yield, 2 to decrease the amount of undetected material, 3 to produce a slight increase in CO yield or no change, 4 to slightly decrease CO2 yield or no change, and 5 to produce a more stable bio-oil (less aging. Char yield and total gas yield were unaffected by feedstock pretreatment. Four other tropical biomass species were also pyrolyzed under one condition (450°C and 1.4 s residence time for comparison to the banagrass results. The samples include two hardwoods: leucaena and eucalyptus, and two grasses: sugarcane bagasse and energy-cane. A sample of pretreated energy-cane was also pyrolyzed. Of the materials tested, the best feedstocks for fast pyrolysis were sugarcane bagasse, pretreated energy cane and eucalyptus based on the yields of 'dry bio-oil', CO and CO2. On the same basis, the least productive feedstocks are untreated banagrass followed by pretreated banagrass and leucaena.

  1. Fast Pyrolysis of Tropical Biomass Species and Influence of Water Pretreatment on Product Distributions.

    Science.gov (United States)

    Morgan, Trevor James; Turn, Scott Q; Sun, Ning; George, Anthe

    2016-01-01

    The fast pyrolysis behaviour of pretreated banagrass was examined at four temperatures (between 400 and 600 C) and four residence times (between ~1.2 and 12 s). The pretreatment used water washing/leaching to reduce the inorganic content of the banagrass. Yields of bio-oil, permanent gases and char were determined at each reaction condition and compared to previously published results from untreated banagrass. Comparing the bio-oil yields from the untreated and pretreated banagrass shows that the yields were greater from the pretreated banagrass by 4 to 11 wt% (absolute) at all reaction conditions. The effect of pretreatment (i.e. reducing the amount of ash, and alkali and alkali earth metals) on pyrolysis products is: 1) to increase the dry bio-oil yield, 2) to decrease the amount of undetected material, 3) to produce a slight increase in CO yield or no change, 4) to slightly decrease CO2 yield or no change, and 5) to produce a more stable bio-oil (less aging). Char yield and total gas yield were unaffected by feedstock pretreatment. Four other tropical biomass species were also pyrolyzed under one condition (450°C and 1.4 s residence time) for comparison to the banagrass results. The samples include two hardwoods: leucaena and eucalyptus, and two grasses: sugarcane bagasse and energy-cane. A sample of pretreated energy-cane was also pyrolyzed. Of the materials tested, the best feedstocks for fast pyrolysis were sugarcane bagasse, pretreated energy cane and eucalyptus based on the yields of 'dry bio-oil', CO and CO2. On the same basis, the least productive feedstocks are untreated banagrass followed by pretreated banagrass and leucaena.

  2. Ethanol production from poplar wood through enzymatic saccharification and fermentation by dilute acid and SPORL pretreatments

    Science.gov (United States)

    Z.J. Wang; J.Y. Zhu; Ronald S. Jr. Zalesny; K.F. Chen

    2012-05-01

    Dilute acid (DA) and Sulfite Pretreatment to Overcome Recalcitrance of Lignocelluloses (SPORL) pretreatments were directly applied to wood chips of four poplar wood samples of different genotypes (hereafter referred to as poplars; Populus tremuloides Michx. ‘native aspen collection’; Populus deltoides Bartr. ex Marsh x Populus nigra L. ‘NE222’ and ‘DN5’; P. nigra x...

  3. Study of enzymatic hydrolysis of pretreated biomass at increased solids loading

    OpenAIRE

    Michael Ioelovich; Ely Morag

    2012-01-01

    The effect of biomass loading from 50 to 200 g/L on enzymatic hydrolysis was studied using switchgrass samples pretreated by dilute acid and hypochlorite-alkaline methods. It was confirmed that an increase of initial loading of the pretreated biomass leads to a decrease of enzymatic digestibility, probably due to difficulty of mass transfer of cellulolytic enzymes in the high-viscous substrate slurry and also because of an inhibiting effect of the formed sugars. An additional sharp problem co...

  4. Effects of pretreatments on the diffusion kinetics and some quality parameters of osmotically dehydrated apple slices.

    Science.gov (United States)

    Taiwo, K A; Angersbach, A; Ade-Omowaye, B I; Knorr, D

    2001-06-01

    This study compared mass transfer during osmotic dehydration (OD) and some quality indices of untreated apple slices to those of apple slices pretreated by either blanching, freezing, or applying high-intensity electric field pulses (HELP) or high pressure (HP). HP, HELP, and blanching increased water loss. Untreated and HELP-treated samples had comparable solids gains, which were lower (P < 0.05) than in the other samples. Apple slices turned brown after pretreatment but the L values of these samples increased with OD. The breaking force of dried samples increased with OD time, and pretreated samples had firmer dried texture than the untreated. Vitamin C content decreased with OD time, but HP- and HELP-treated apples had better retention of vitamin C.

  5. Coordinated renewable energy support schemes

    DEFF Research Database (Denmark)

    Morthorst, P.E.; Jensen, S.G.

    2006-01-01

    This paper illustrates the effect that can be observed when support schemes for renewable energy are regionalised. Two theoretical examples are used to explain interactive effects on, e.g., the price of power, conditions for conventional power producers, and changes in import and export of power...... RES-E support schemes already has a common liberalised power market. In this case the introduction of a common support scheme for renewable technologies will lead to more efficient sitings of renewable plants, improving economic and environmental performance of the total power system...

  6. Lack of bioavailability of mebeverine even after pretreatment with pyridostigmine.

    Science.gov (United States)

    Sommers, D K; Snyman, J R; van Wyk, M; Eloff, J N

    1997-01-01

    After the oral administration of mebeverine to animal or human, measurable concentrations of the drug have never been found in the plasma. The ex vivo hydrolysis of mebeverine can be blocked by esterase inhibitors. In the present study, human volunteers were pretreated with pyridostigmine to attempt to improve the bioavailability of the parent drug. Following a single-blind, random design, 12 normal human volunteers received orally either placebo or 60 mg pyridostigmine, followed 2 h later by 405 mg mebeverine. Blood samples were drawn intermittently for 4 h and were spiked immediately with neostigmine in order to block ex vivo hydrolysis. Even after pretreatment with pyridostigmine, the plasma samples failed to reveal detectable concentrations of mebeverine. Pyridostigmine pretreatment mediated a significantly higher peak concentration of veratric acid, the acid moiety resulting from hydrolysis of mebeverine. As mebeverine seemingly undergoes complete presystemic hydrolysis, it seems unlikely that the effects of the drug could be mediated centrally. Furthermore, as it is unlikely that sufficient mebeverine traverses the intestine to exert a local effect on the colon (i.e., the time-course of veratric acid plasma levels does not support such a conclusion), the therapeutic effect of the drug, if any, has to be ascribed to an active metabolite. However, the hydrolysis products of mebeverine are not known to be pharmacologically active.

  7. Ultrasound pretreatment of filamentous algal biomass for enhanced biogas production.

    Science.gov (United States)

    Lee, Kwanyong; Chantrasakdakul, Phrompol; Kim, Daegi; Kong, Mingeun; Park, Ki Young

    2014-06-01

    The filamentous alga Hydrodictyon reticulatum harvested from a bench-scale wastewater treatment pond was used to evaluate biogas production after ultrasound pretreatment. The effects of ultrasound pretreatment at a range of 10-5000 J/mL were tested with harvested H. reticulatum. Cell disruption by ultrasound was successful and showed a higher degree of disintegration at a higher applied energy. The range of 10-5000 J/mL ultrasound was able to disintegrated H. reticulatum and the soluble COD was increased from 250 mg/L to 1000 mg/L at 2500 J/mL. The disintegrated algal biomass was digested for biogas production in batch experiments. Both cumulative gas generation and volatile solids reduction data were obtained during the digestion. Cell disintegration due to ultrasound pretreatment increased the specific biogas production and degradation rates. Using the ultrasound approach, the specific methane production at a dose of 40 J/mL increased up to 384 mL/g-VS fed that was 2.3 times higher than the untreated sample. For disintegrated samples, the volatile solids reduction was greater with increased energy input, and the degradation increased slightly to 67% at a dose of 50 J/mL. The results also indicate that disintegration of the algal cells is the essential step for efficient anaerobic digestion of algal biomass. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. Optimizing multiplexing scheme in interferometric microscopy

    Science.gov (United States)

    Tayebi, Behnam; Jaferzadeh, Keyvan; Sharif, Farnaz; Han, Jae-Ho

    2016-08-01

    In single exposure off-axis interferometry, multiple information can be recorded by spatial frequency multiplexing. We investigate optimum conditions for designing 2D sampling schemes to record larger field of view in off-axis interferometry multiplexing. The spatial resolution of the recorded image is related to the numerical aperture of the system and sensor pixel size. The spatial resolution should preserve by avoiding crosstalk in the frequency domain. Furthermore, the field of view depends on the sensor size and magnification of the imaging system. In order to preserve resolution and have a larger field of view, the frequency domain should be designed correctly. The experimental results demonstrate that selecting the wrong geometrical scheme in frequency domain decrease the recorded image area.

  9. Two-step sequential pretreatment for the enhanced enzymatic hydrolysis of coffee spent waste.

    Science.gov (United States)

    Ravindran, Rajeev; Jaiswal, Swarna; Abu-Ghannam, Nissreen; Jaiswal, Amit K

    2017-09-01

    In the present study, eight different pretreatments of varying nature (physical, chemical and physico-chemical) followed by a sequential, combinatorial pretreatment strategy was applied to spent coffee waste to attain maximum sugar yield. Pretreated samples were analysed for total reducing sugar, individual sugars and generation of inhibitory compounds such as furfural and hydroxymethyl furfural (HMF) which can hinder microbial growth and enzyme activity. Native spent coffee waste was high in hemicellulose content. Galactose was found to be the predominant sugar in spent coffee waste. Results showed that sequential pretreatment yielded 350.12mg of reducing sugar/g of substrate, which was 1.7-fold higher than in native spent coffee waste (203.4mg/g of substrate). Furthermore, extensive delignification was achieved using sequential pretreatment strategy. XRD, FTIR, and DSC profiles of the pretreated substrates were studied to analyse the various changes incurred in sequentially pretreated spent coffee waste as opposed to native spent coffee waste. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Low melting point pyridinium ionic liquid pretreatment for enhancing enzymatic saccharification of cellulosic biomass.

    Science.gov (United States)

    Uju; Nakamoto, Aya; Shoda, Yasuhiro; Goto, Masahiro; Tokuhara, Wataru; Noritake, Yoshiyuki; Katahira, Satoshi; Ishida, Nobuhiro; Ogino, Chiaki; Kamiya, Noriho

    2013-05-01

    The potential of 1-hexylpyridinium chloride ([Hpy][Cl]), to pretreat cellulosic feedstocks was investigated using microcrystalline cellulose (Avicel) and Bagasse at 80 °C or 100 °C. Short [Hpy][Cl] pretreatments, <30 min, at lower temperature accelerate subsequent enzymatic saccharification of Avicel. Over 95% conversion of pretreated Avicel to glucose was attained after 24h enzymatic saccharification under optimal conditions, whereas regenerated Bagasse showed 1-3-fold higher conversion than untreated biomass. FT-IR analysis of both Avicel and Bagasse samples pretreated with [Hpy][Cl] or 1-ethyl-3-methyimidazolium acetate ([Emim][OAc]) revealed that these ionic liquids behaved differently during pretreatment. [Hpy][Cl] pretreatment for an extended duration (180 min) released mono- and disaccharides without using cellulase enzymes, suggesting [Hpy][Cl] has capability for direct saccharification of cellulosic feedstocks. On the basis of the results obtained, [Hpy][Cl] pretreatment enhanced initial reaction rates in enzymatic saccharification by either crystalline polymorphic alteration of cellulose or partial degradation of the crystalline cellulosic fraction in biomass. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Effect of Various Pretreatments on Quality Attributes of Vacuum-Fried Shiitake Mushroom Chips

    Directory of Open Access Journals (Sweden)

    Aiqing Ren

    2018-01-01

    Full Text Available The objective of this study is to investigate the effects of pretreatments on the quality of vacuum-fried shiitake mushroom slices. Four different pretreatments addressed in this study were (1 blanching as control, (2 blanching and osmotic dehydration with maltodextrin (MD solution, (3 blanching, osmotic dehydration, and coating with sodium carboxymethyl cellulose (CMC, (4 blanching and osmotic dehydration, followed by freezing. All samples were pretreated and then fried in palm oil at 90°C with vacuum degree of −0.095 MPa for 30 min. The results showed that pretreatments significantly (p0.05 differences of fried chip in the texture among the four different pretreatments. The aw values of all the fried chips were less than 0.38, indicating that the products had a long shelf life. Therefore, the blanching, osmotic dehydration, and coating pretreatment before vacuum frying was the most suitable pretreatment for vacuum-fried shiitake mushroom chips.

  12. Effect of pretreatment on the enzymatic hydrolysis of kitchen waste for xanthan production.

    Science.gov (United States)

    Li, Panyu; Zeng, Yu; Xie, Yi; Li, Xiang; Kang, Yan; Wang, Yabo; Xie, Tonghui; Zhang, Yongkui

    2017-01-01

    The study was carried out to gain insight into the effect of pretreatment on enzymatic hydrolysis of kitchen waste (KW) for xanthan fermentation. Herein, various pretreatments were applied and it was found that chemical pretreatment had positive effect on the following enzymatic or overall hydrolysis process. The highest reducing sugar concentration was obtained as 51.87g/L from 2% HCl (90°C) pretreated sample, while the Kjeldahl nitrogen (KDN) concentration was 7.79g/L. Kinetic study showed that first order kinetic model was suitable to describe the enzymatic hydrolysis process. The obtained kitchen waste hydrolysate (KWH) was successfully applied for xanthan fermentation. Xanthan concentration reached 4.09-6.46g/L when KWH with 2% HCl (90°C) pretreatment was applied as medium. In comparison, a xanthan concentration of 3.25-5.57g/L was obtained from KWH without pretreatment. Therefore, pretreatment of KW using diluted acid is favorable for the overall hydrolysis process and effective for xanthan fermentation. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Enzymatic digestion of alkaline-sulfite pretreated sugar cane bagasse and its correlation with the chemical and structural changes occurring during the pretreatment step.

    Science.gov (United States)

    Mendes, Fernanda M; Laurito, Debora F; Bazzeggio, Mariana; Ferraz, André; Milagres, Adriane M F

    2013-01-01

    Sugar cane bagasse is recalcitrant to enzymatic digestion, which hinders the efficient conversion of its polysaccharides into fermentable sugars. Alkaline-sulfite pretreatment was used to overcome the sugar cane bagasse recalcitrance. Chemical and structural changes that occurred during the pretreatment were correlated with the efficiency of the enzymatic digestion of the polysaccharides. The first 30 min of pretreatment, which removed approximately half of the initial lignin and 30% of hemicellulose seemed responsible for a significant enhancement of the cellulose conversion level, which reached 64%. After the first 30 min of pretreatment, delignification increased slightly, and hemicellulose removal was not enhanced; however, acid groups continued to be introduced into the residual lignin. Water retention values were 145% to the untreated bagasse and 210% to the bagasse pretreated for 120 min and fiber widths increased from 10.4 to 30 μm, respectively. These changes were responsible for an additional increase in the efficiency of enzymatic hydrolysis of the cellulose, which reached 92% with the 120 min pretreated sample. © 2013 American Institute of Chemical Engineers.

  14. Structural Analysis of Alkaline Pretreated Rice Straw for Ethanol Production

    National Research Council Canada - National Science Library

    Paripok Phitsuwan; Chutidet Permsriburasuk; Sirilak Baramee; Thitiporn Teeravivattanakit; Khanok Ratanakhanokchai

    2017-01-01

    ...) at two pretreatment temperatures: room temperature and 60°C. Statistical analysis indicated similarity of enzymatic glucose production at both pretreatment temperatures after 3-day incubation...

  15. An Assessment of the Kwabre District Mutual Health Insurance Scheme in Ghana

    OpenAIRE

    D. Adei; V. Osei Kwadwo; S.K. Diko

    2012-01-01

    The National Health Insurance Scheme (NHIS) in Ghana has been in operation since 2005 as a nationwide health financing option in the form of District Mutual Health Insurance Schemes. With the Kwabre District Mutual Health Insurance Scheme as a case study the study sought to assess; households level of satisfaction, challenges affecting the scheme, the scheme’s sustainability prospects and make recommendations to inform policy. Primary data were obtained through a household sample of 203, whic...

  16. A Novel Iris Segmentation Scheme

    Directory of Open Access Journals (Sweden)

    Chen-Chung Liu

    2014-01-01

    Full Text Available One of the key steps in the iris recognition system is the accurate iris segmentation from its surrounding noises including pupil, sclera, eyelashes, and eyebrows of a captured eye-image. This paper presents a novel iris segmentation scheme which utilizes the orientation matching transform to outline the outer and inner iris boundaries initially. It then employs Delogne-Kåsa circle fitting (instead of the traditional Hough transform to further eliminate the outlier points to extract a more precise iris area from an eye-image. In the extracted iris region, the proposed scheme further utilizes the differences in the intensity and positional characteristics of the iris, eyelid, and eyelashes to detect and delete these noises. The scheme is then applied on iris image database, UBIRIS.v1. The experimental results show that the presented scheme provides a more effective and efficient iris segmentation than other conventional methods.

  17. Good governance for pension schemes

    CERN Document Server

    Thornton, Paul

    2011-01-01

    Regulatory and market developments have transformed the way in which UK private sector pension schemes operate. This has increased demands on trustees and advisors and the trusteeship governance model must evolve in order to remain fit for purpose. This volume brings together leading practitioners to provide an overview of what today constitutes good governance for pension schemes, from both a legal and a practical perspective. It provides the reader with an appreciation of the distinctive characteristics of UK occupational pension schemes, how they sit within the capital markets and their social and fiduciary responsibilities. Providing a holistic analysis of pension risk, both from the trustee and the corporate perspective, the essays cover the crucial role of the employer covenant, financing and investment risk, developments in longevity risk hedging and insurance de-risking, and best practice scheme administration.

  18. Integrated analysis of hydrothermal flow through pretreatment

    Directory of Open Access Journals (Sweden)

    Archambault-Leger Veronique

    2012-07-01

    Full Text Available Abstract Background The impact of hydrothermal flowthrough (FT pretreatment severity on pretreatment and solubilization performance metrics was evaluated for three milled feedstocks (corn stover, bagasse, and poplar and two conversion systems (simultaneous saccharification and fermentation using yeast and fungal cellulase, and fermentation by Clostridium thermocellum. Results Compared to batch pretreatment, FT pretreatment consistently resulted in higher XMG recovery, higher removal of non-carbohydrate carbon and higher glucan solubilization by simultaneous saccharification and fermentation (SSF. XMG recovery was above 90% for FT pretreatment below 4.1 severity but decreased at higher severities, particularly for bagasse. Removal of non-carbohydrate carbon during FT pretreatment increased from 65% at low severity to 80% at high severity for corn stover, and from 40% to 70% for bagasse and poplar. Solids obtained by FT pretreatment were amenable to high conversion for all of the feedstocks and conversion systems examined. The optimal time and temperature for FT pretreatment on poplar were found to be 16 min and 210°C. At these conditions, SSF glucan conversion was about 85%, 94% of the XMG was removed, and 62% of the non carbohydrate mass was solubilized. Solubilization of FT-pretreated poplar was compared for C. thermocellum fermentation (10% inoculum, and for yeast-fungal cellulase SSF (5% inoculum, cellulase loading of 5 and 10 FPU/g glucan supplemented with β-glucosidase at 15 and 30 U/g glucan. Under the conditions tested, which featured low solids concentration, C. thermocellum fermentation achieved faster rates and more complete conversion of FT-pretreated poplar than did SSF. Compared to SSF, solubilization by C. thermocellum was 30% higher after 4 days, and was over twice as fast on ball-milled FT-pretreated poplar. Conclusions XMG removal trends were similar between feedstocks whereas glucan conversion trends were significantly

  19. Breeding schemes in reindeer husbandry

    Directory of Open Access Journals (Sweden)

    Lars Rönnegård

    2003-04-01

    Full Text Available The objective of the paper was to investigate annual genetic gain from selection (G, and the influence of selection on the inbreeding effective population size (Ne, for different possible breeding schemes within a reindeer herding district. The breeding schemes were analysed for different proportions of the population within a herding district included in the selection programme. Two different breeding schemes were analysed: an open nucleus scheme where males mix and mate between owner flocks, and a closed nucleus scheme where the males in non-selected owner flocks are culled to maximise G in the whole population. The theory of expected long-term genetic contributions was used and maternal effects were included in the analyses. Realistic parameter values were used for the population, modelled with 5000 reindeer in the population and a sex ratio of 14 adult females per male. The standard deviation of calf weights was 4.1 kg. Four different situations were explored and the results showed: 1. When the population was randomly culled, Ne equalled 2400. 2. When the whole population was selected on calf weights, Ne equalled 1700 and the total annual genetic gain (direct + maternal in calf weight was 0.42 kg. 3. For the open nucleus scheme, G increased monotonically from 0 to 0.42 kg as the proportion of the population included in the selection programme increased from 0 to 1.0, and Ne decreased correspondingly from 2400 to 1700. 4. In the closed nucleus scheme the lowest value of Ne was 1300. For a given proportion of the population included in the selection programme, the difference in G between a closed nucleus scheme and an open one was up to 0.13 kg. We conclude that for mass selection based on calf weights in herding districts with 2000 animals or more, there are no risks of inbreeding effects caused by selection.

  20. A Novel, Simplified Scheme for Plastics Identification: "JCE" Classroom Activity 104

    Science.gov (United States)

    Harris, Mary E.; Walker, Barbara

    2010-01-01

    In this Activity, students identify samples of seven types of recyclable plastic by using a flowchart scheme. The flowchart procedure includes making density comparisons of the plastic samples in water and alcohol and observing physical changes of plastic samples subjected to boiling water temperatures and exposure to acetone. This scheme is…

  1. Stochastic thermostats: comparison of local and global schemes

    CERN Document Server

    Bussi, Giovanni

    2008-01-01

    We show that a recently introduced stochastic thermostat [J. Chem. Phys. 126 (2007) 014101] can be considered as a global version of the Langevin thermostat. We compare the global scheme and the local one (Langevin) from a formal point of view and through practical calculations on a model Lennard-Jones liquid. At variance with the local scheme, the global thermostat preserves the dynamical properties for a wide range of coupling parameters, and allows for a faster sampling of the phase-space.

  2. Comparing the Effect of Radiative Transfer Schemes on Convection Simulations

    OpenAIRE

    Tanner, Joel D.; Basu, Sarbani; Demarque, Pierre

    2012-01-01

    We examine the effect of different radiative transfer schemes on the properties of 3D simulations of near-surface stellar convection in the superadiabatic layer, where energy transport transitions from fully convective to fully radiative. We employ two radiative transfer schemes that fundamentally differ in the way they cover the 3D domain. The first solver approximates domain coverage with moments, while the second solver samples the 3D domain with ray integrations. By comparing simulations ...

  3. Elucidating the role of ferrous ion cocatalyst in enhancing dilute acid pretreatment of lignocellulosic biomass

    Directory of Open Access Journals (Sweden)

    Wei Hui

    2011-11-01

    Full Text Available Abstract Background Recently developed iron cocatalyst enhancement of dilute acid pretreatment of biomass is a promising approach for enhancing sugar release from recalcitrant lignocellulosic biomass. However, very little is known about the underlying mechanisms of this enhancement. In the current study, our aim was to identify several essential factors that contribute to ferrous ion-enhanced efficiency during dilute acid pretreatment of biomass and to initiate the investigation of the mechanisms that result in this enhancement. Results During dilute acid and ferrous ion cocatalyst pretreatments, we observed concomitant increases in solubilized sugars in the hydrolysate and reducing sugars in the (insoluble biomass residues. We also observed enhancements in sugar release during subsequent enzymatic saccharification of iron cocatalyst-pretreated biomass. Fourier transform Raman spectroscopy showed that major peaks representing the C-O-C and C-H bonds in cellulose are significantly attenuated by iron cocatalyst pretreatment. Imaging using Prussian blue staining indicated that Fe2+ ions associate with both cellulose/xylan and lignin in untreated as well as dilute acid/Fe2+ ion-pretreated corn stover samples. Analyses by scanning electron microscopy and transmission electron microscopy revealed structural details of biomass after dilute acid/Fe2+ ion pretreatment, in which delamination and fibrillation of the cell wall were observed. Conclusions By using this multimodal approach, we have revealed that (1 acid-ferrous ion-assisted pretreatment increases solubilization and enzymatic digestion of both cellulose and xylan to monomers and (2 this pretreatment likely targets multiple chemistries in plant cell wall polymer networks, including those represented by the C-O-C and C-H bonds in cellulose.

  4. Hydrolysis of alkaline pretreated banana peel

    Science.gov (United States)

    Fatmawati, A.; Gunawan, K. Y.; Hadiwijaya, F. A.

    2017-11-01

    Banana peel is one of food wastes that are rich in carbohydrate. This shows its potential as fermentation substrate including bio-ethanol. This paper presented banana peel alkaline pretreatment and enzymatic hydrolysis. The pretreatment was intended to prepare banana peel in order to increase hydrolysis performance. The alkaline pretreatment used 10, 20, and 30% w/v NaOH solution and was done at 60, 70 and 80°C for 1 hour. The hydrolysis reaction was conducted using two commercial cellulose enzymes. The reaction time was varied for 3, 5, and 7 days. The best condition for pretreatment process was one conducted using 30% NaOH solution and at 80°C. This condition resulted in cellulose content of 90.27% and acid insoluble lignin content of 2.88%. Seven-day hydrolysis time had exhibited the highest reducing sugar concentration, which was7.2869 g/L.

  5. Understanding Ionic Liquid Pretreatment of Lignocellulosic Biomasses

    Science.gov (United States)

    Pretreatment of biomass is essential for breaking apart highly ordered and crystalline plant cell walls and loosening the lignin and hemicellulose conjugation to cellulose microfibrills, thereby facilitating enzyme accessibility and adsorption and reducing costs of downstream saccharification proces...

  6. Extrusion Pretreatment of Lignocellulosic Biomass: A Review

    Directory of Open Access Journals (Sweden)

    Jun Zheng

    2014-10-01

    Full Text Available Bioconversion of lignocellulosic biomass to bioethanol has shown environmental, economic and energetic advantages in comparison to bioethanol produced from sugar or starch. However, the pretreatment process for increasing the enzymatic accessibility and improving the digestibility of cellulose is hindered by many physical-chemical, structural and compositional factors, which make these materials difficult to be used as feedstocks for ethanol production. A wide range of pretreatment methods has been developed to alter or remove structural and compositional impediments to (enzymatic hydrolysis over the last few decades; however, only a few of them can be used at commercial scale due to economic feasibility. This paper will give an overview of extrusion pretreatment for bioethanol production with a special focus on twin-screw extruders. An economic assessment of this pretreatment is also discussed to determine its feasibility for future industrial cellulosic ethanol plant designs.

  7. Industrial Pretreatment Program for New England

    Science.gov (United States)

    The Industrial Pretreatment Program prevents the discharge of pollutants to Publicly-Owned Treatment Works (POTWs) which will interfere with the operations of the POTW or its use and disposal of municipal biosolids.

  8. Diazepam e nordiazepam em plasma: métodos de extração líquido-líquido e em fase sólida no pré-tratamento de amostras para análise cromatográfica em fase líquida Diazepam and nordiazepam in plasma: liquid-liquid and solid phase extraction in sample pre-treatment for high performance liquid chromatography analysis

    Directory of Open Access Journals (Sweden)

    Ellen Figueiredo Freire

    2005-10-01

    Full Text Available Analysis of diazepam (DZP and its active metabolite nordiazepam (NDZP in plasma is commonly performed in clinical medicine to ensure proper therapeutic effects while minimizing the incidence of toxicity. This study aimed to optimize analytical parameters and compare two pre-treatment techniques, liquid-liquid (LLE and solid phase extraction (SPE, as well as liquid chromatographic conditions to analyze simultaneously DZP and NDZP in plasma from 20 patients treated with a daily dose of 10 mg. Both techniques showed to be well in line with the international criteria for analytical validation, which permitted to quantify DZP (66.2 - 1148.6 ng mL-1 and NDZP (138.5 - 808.6 ng mL -1 in all samples. The correlation coefficients between SPE and LLE were respectively 0.9729 for DZP and 0.9643 for NDZP.

  9. Cellulose extraction from Zoysia japonica pretreated by alumina-doped MgO in AMIMCl.

    Science.gov (United States)

    Liu, Le; Ju, Meiting; Li, Weizun; Jiang, Yang

    2014-11-26

    In this study, alumina-doped MgO was produced as a solid alkali for lignocellulose pretreatment. Pretreatment with alumina-doped MgO disrupted the lignocellulose structure and significantly reduced the lignin content of the Z. japonica. After pretreatment, Z. japonica showed significant solubility in 1-allyl-3-methylimidazolium chloride (AMIMCl). The similar high solubility of pretreated Z. japonica samples by original alumina-doped MgO and used alumina-doped MgO also proved that alumina-doped MgO had strong stability, which can be recycled and used repeatedly. The regenerated cellulose was similar to microcrystalline cellulose according to FTIR and NMR analyses. Compared to microcrystalline cellulose, only the crystallinity of the regenerated cellulose decreased. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. Exploring crystalline-structural variations of cellulose during alkaline pretreatment for enhanced enzymatic hydrolysis.

    Science.gov (United States)

    Ling, Zhe; Chen, Sheng; Zhang, Xun; Xu, Feng

    2017-01-01

    The study aimed to explore the crystallinity and crystalline structure of alkaline pretreated cellulose. The enzymatic hydrolysis followed by pretreatment was conducted for measuring the efficiency of sugar conversion. For cellulose Iβ dominated samples, alkaline pretreatment (cellulose crystallinity and depolymerized hemicelluloses, that were superimposed to affect the enzymatic conversion to glucose. Varying crystallite sizes and lattice spacings indicated the separation of cellulose crystals during mercerization (8-12wt% NaOH). Completion of mercerization was proved under higher alkaline concentration (14-18wt% NaOH), leading to distortion of crystalline cellulose to some extent. Cellulose II crystallinity showed a stimulative impact on enzymatic hydrolysis due to the weakened hydrophobic interactions within cellulose chains. The current study may provide innovative explanations for enhanced enzymatic digestibility of alkaline pretreated lignocellulosic materials. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Pretreatment techniques for biofuels and biorefineries

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Zhen (ed.) [Chinese Academy of Sciences, Kunming, YN (China). Xishuangbanna Tropical Botonical Garden

    2013-02-01

    The first book focused on pretreatment techniques for biofuels contributed by the world's leading experts. Extensively covers the different types of biomass, various pretreatment approaches and methods that show the subsequent production of biofuels and chemicals. In addition to traditional pretreatment methods, novel techniques are also introduced and discussed. An accessible reference work for students, researchers, academicians and industrialists in biorefineries. This book includes 19 chapters contributed by the world's leading experts on pretreatment methods for biomass. It extensively covers the different types of biomass (e.g. molasses, sugar beet pulp, cheese whey, sugarcane residues, palm waste, vegetable oil, straws, stalks and wood), various pretreatment approaches (e.g. physical, thermal, chemical, physicochemical and biological) and methods that show the subsequent production of biofuels and chemicals such as sugars, ethanol, extracellular polysaccharides, biodiesel, gas and oil. In addition to traditional methods such as steam, hot-water, hydrothermal, diluted-acid, organosolv, ozonolysis, sulfite, milling, fungal and bacterial, microwave, ultrasonic, plasma, torrefaction, pelletization, gasification (including biogas) and liquefaction pretreatments, it also introduces and discusses novel techniques such as nano and solid catalysts, organic electrolyte solutions and ionic liquids. This book offers a review of state-of-the-art research and provides guidance for the future paths of developing pretreatment techniques of biomass for biofuels, especially in the fields of biotechnology, microbiology, chemistry, materials science and engineering. It intends to provide a systematic introduction of pretreatment techniques. It is an accessible reference work for students, researchers, academicians and industrialists in biorefineries.

  12. Properties of realized variance under alternative sampling schemes

    NARCIS (Netherlands)

    Oomen, R.C.A.

    2006-01-01

    This paper investigates the statistical properties of the realized variance estimator in the presence of market microstructure noise. Different from the existing literature, the analysis relies on a pure jump process for high frequency security prices and explicitly distinguishes among alternative

  13. Optimal spatial sampling scheme to characterize mine tailings

    CSIR Research Space (South Africa)

    Debba, Pravesh

    2009-08-01

    Full Text Available to Characterize Mine Tailings Pravesh Debba1; Emmanuel John M. Carranza2; Alfred Stein2; Freek D. van der Meer2 1CSIR, Built Environment, Logisitics and Quantitative Methods, PO Box 395, Pretoria, 0001, South Africa. 2International Institute for Geo...-Information Science and Earth Observation (ITC), Hengelosestraat 99, PO Box 6, 7500 AA, Enschede, The Netherlands. E-mail: pdebba@csir.co.za; carranza@itc.nl; stein@itc.nl; vdmeer@itc.nl INTRODUCTION Geochemical characterization of mine waste impoundments...

  14. Optimum sampling scheme for characterization of mine tailings

    CSIR Research Space (South Africa)

    Debba, Pravesh

    2009-07-01

    Full Text Available FOR CHARACTERIZATION OF MINE TAILINGS P. Debba The Council for Scientific and Industrial Research (CSIR) CSIR Built Environment P. O. Box 395, 0001, South Africa email: pdebba@csir.co.za E.J.M. Carranza, A. Stein, F.D. van der Meer International Institute...: Exploration, Environment, Anal- ysis, vol. 3, no. 2, pp. 219–228, 2003. [3] P. Debba, E. J. M. Carranza, F. D. van der Meer, and A. Stein, “Abundance estimation of spectrally similar materials by using derivatives in simulated annealing,” IEEE Geoscience...

  15. Lignocellulosic biomass-Thermal pretreatment with steam: Pretreatment techniques for biofuels and biorefineries

    DEFF Research Database (Denmark)

    Toor, Saqib; Rosendahl, Lasse; Hoffmann, Jessica

    2013-01-01

    With the ever rising demand for more energy and the limited availability of depleted world resources, many are beginning to look for alternatives to fossil fuels. Liquid biofuel, in particular, is of key interest to decrease our dependency on fuels produced from imported petroleum. Biomass pre...... of different pretreatment methods are known to enhance the digestibility of lingo-cellulosic biomass by affecting these limiting factors. Some of them are: milling, thermal pretreatment with steam or hot water, acid pre-treatment and alkaline pre-treatment. This chapter will focus on one of the more promising...

  16. Microstructural study of pre-treated and enzymatic hydrolyzed bamboo

    Directory of Open Access Journals (Sweden)

    Funsho O. KOLAWOLE

    2016-07-01

    Full Text Available Bamboo was used as biomass feedstock which was pre-treated using dilute acid hydrolysis followed by enzymatic hydrolysis. The bamboo was mechanical ground to particle sizes 212–500µm, followed by pre-treatment with dilute sulfuric acid at a concentration of 0.5 and 1.0 (%v/v at temperatures of 25, 110, 120, 150 and 200°C with time intervals of 2 and 4 hours. Pre-hydrolyzate was later analyzed for reducing sugar using UV-Vis spectrophotometry. Under the above conditions, a maximum glucose yield of 153.1 mg/g was obtained at 200°C and acid concentrations of 1% for 4 hours. Water insoluble solids obtained were subsequently hydrolyzed with Celluclast (Trichoderma reesi and β-glucosidase (Novozyme 188 for 72 hours. Optical Microscope and ESEM images of bamboo samples were obtained at various stages of pre-treatment and enzymatic hydrolysis. Result reveals a breakdown in the ligno-cellulosic structure of the bamboo during exposure to dilute acid and enzymatic hydrolysis.

  17. Wastewater pretreatment at Cape Canaveral Air Force Station

    Energy Technology Data Exchange (ETDEWEB)

    Garrett, D.W.; Zanoni, P.D.

    1999-07-01

    Cape Canaveral Air Force Station (CCAFS) in Florida provides berthing services for US military ships and submarines including the storage and pretreatment of various types of onboard wastewater. CCAFS required an upgrade to the current pretreatment processes to adequately treat shipboard, bilge and missile tube wastewaters prior to discharge to a new base sewage treatment plant. A wastewater characterization showed that the nature of the onboard wastewaters is quite unique and highly variable. Due to the unusual characteristics of these wastewaters, treatability testing was performed on representative samples of these wastewater to simulate pH adjustment, gravity oil separation and dissolved air flotation (DAF). Based on the results of that readability tests and other design requirements, three pretreatment systems were designed, one for each type of wastewater. Due to the location and the high profile nature of the project, several special design issues were involved including special aesthetics requirements, environmental restrictions, special clear zones from munitions storage and multiple review agencies. The project was completed within the required schedule and budget constraints.

  18. Multiuser switched diversity scheduling schemes

    KAUST Repository

    Shaqfeh, Mohammad

    2012-09-01

    Multiuser switched-diversity scheduling schemes were recently proposed in order to overcome the heavy feedback requirements of conventional opportunistic scheduling schemes by applying a threshold-based, distributed, and ordered scheduling mechanism. The main idea behind these schemes is that slight reduction in the prospected multiuser diversity gains is an acceptable trade-off for great savings in terms of required channel-state-information feedback messages. In this work, we characterize the achievable rate region of multiuser switched diversity systems and compare it with the rate region of full feedback multiuser diversity systems. We propose also a novel proportional fair multiuser switched-based scheduling scheme and we demonstrate that it can be optimized using a practical and distributed method to obtain the feedback thresholds. We finally demonstrate by numerical examples that switched-diversity scheduling schemes operate within 0.3 bits/sec/Hz from the ultimate network capacity of full feedback systems in Rayleigh fading conditions. © 2012 IEEE.

  19. Microbiological test results using three urine pretreatment regimes with 316L stainless steel

    Science.gov (United States)

    Huff, Timothy L.

    1993-01-01

    Three urine pretreatments, (1) Oxone (Dupont) and sulfuric acid, (2) sodium hypochlorite and sulfuric acid, (3) and ozone, were studied for their ability to reduce microbial levels in urine and minimize surface attachment to 316L stainless steel coupons. Urine samples inoculated with Bacillus insolitus and a filamentous mold, organisms previously recovered from the vapor compression distillation subsystem of NASA Space Station Freedom water recovery test were tested in glass corrosion cells containing base or weld metal coupons. Microbial levels, changes in pH, color, turbidity, and odor of the fluid were monitored over the course of the 21-day test. Specimen surfaces were examined by scanning electron microscopy at completion of the test for microbial attachment. Ozonated urine samples were less turbid and had lower microbial levels than controls or samples receiving other pretreatments. Base metal coupons receiving pretreatment were relatively free of attached bacteria. However, well-developed biofilms were found in the heat-affected regions of welded coupons receiving Oxone and hypochlorite pretreatments. Few bacteria were observed in the same regions of the ozone pretreatment sample.

  20. Tailoring degradation of AZ31 alloy by surface pre-treatment and electrospun PCL fibrous coating

    Energy Technology Data Exchange (ETDEWEB)

    Hanas, T. [Medical Materials Laboratory, Indian Institute of Technology Madras, Chennai 600036 (India); School of Nano Science and Technology, National Institute of Technology Calicut, Calicut, Kerala 673601 (India); Sampath Kumar, T.S., E-mail: tssk@iitm.ac.in [Medical Materials Laboratory, Indian Institute of Technology Madras, Chennai 600036 (India); Perumal, Govindaraj; Doble, Mukesh [Department of Biotechnology - Bhupat and Jyoti Mehta School of Biosciences, Indian Institute of Technology Madras, Chennai 600036 (India)

    2016-08-01

    AZ31 magnesium alloy was coated with polycaprolactone (PCL) nano-fibrous layer using electrospinning technique so as to control degradation in physiological environment. Before coating, the alloy was treated with HNO{sub 3} to have good adhesion between the coating and substrate. To elucidate the role of pre-treatment and coating, samples only with PCL coating as well as HNO{sub 3} treatment only were prepared for comparison. Best coating adhesion of 4B grade by ASTM D3359–09 tape test was observed for pre-treated samples. The effect of coating on in vitro degradation and biomineralization was studied using supersaturated simulated body fluid (SBF 5 ×). The weight loss and corrosion results obtained by immersion test showed that the combination of HNO{sub 3} pre-treatment and PCL coating is very effective in controlling the degradation rate and improving bioactivity. Cytotoxicity studies using L6 cells showed that PCL coated sample has better cell adhesion and proliferation compared to uncoated samples. Nano-fibrous PCL coating combined with prior acid treatment seems to be a promising method to tailor degradation rate with enhanced bioactivity of Mg alloys. - Highlights: • PCL electrospun coating on HNO{sub 3} pre-treated AZ31 alloy controls biodegradation. • Acid pre-treatment stabilizes the substrate - coating interface. • Electrospun porous coating improves biomineralization. • Coating similar to extracellular matrix enhances cell adhesion.

  1. Modulation Schemes for Wireless Access

    Directory of Open Access Journals (Sweden)

    F. Vejrazka

    2000-12-01

    Full Text Available Four modulation schemes, namely minimum shift keying (MSK, Gaussianminimum shift keying (GMSK, multiamplitude minimum shift keying(MAMSK and π/4 differential quadrature phase shift keying (π/4-QPSKare described and their applicability to wireless access is discussedin the paper. Low complexity receiver structures based on differentialdetection are analysed to estimate the performance of the modulationschemes in the additive Gaussian noise and the Rayleigh and Riceenvelope fast fading channel. The bandwidth efficiency is calculated toevaluate the modulation schemes. The results show that the MAMSK schemegives the greatest bandwidth efficiency, but its performance in theRayleigh channel is rather poor. In contrast, the MSK scheme is lessbandwidth efficient, but it is more resistant to Rayleigh fading. Theperformance of π/4-QPSK signal is considerably improved by appropriateprefiltering.

  2. Strengths, challenges, and opportunities for hydrothermal pretreatment in lignocellulosic biorefineries: Hydrothermal Pretreatment

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Bin [Bioproducts, Sciences, and Engineering Laboratory, Department of Biological Systems Engineering, Washington State University, Richland WA USA; Tao, Ling [National Bioenergy Center, National Renewable Energy Laboratory, Golden CO USA; Wyman, Charles E. [Chemical and Environmental Engineering Department and Center for Environmental Research and Technology, Bourns College of Engineering, University of California at Riverside, CA, USA, BioEnergy Science Center (BESC), Oak Ridge National Laboratory, TN USA

    2017-10-11

    Pretreatment prior to or during biological conversion is required to achieve high sugar yields essential to economic production of fuels and chemicals from low cost, abundant lignocellulosic biomass. Aqueous thermochemical pretreatments achieve this performance objective from pretreatment coupled with subsequent enzymatic hydrolysis, but chemical pretreatment can also suffer from additional costs for exotic materials of construction, the need to recover or neutralize the chemicals, introduction of compounds that inhibit downstream operations, and waste disposal, as well as for the chemicals themselves. The simplicity of hydrothermal pretreatment with just hot water offers the potential to greatly improve the cost of the entire conversion process if sugar degradation during pretreatment, production of un-fermentable oligomers, and the amount of expensive enzymes needed to obtain satisfactory yields from hydrothermally pretreated solids can be reduced. Biorefinery economics would also benefit if value could be generated from lignin and other components that are currently fated to be burned for power. However, achieving these goals will no doubt require development of advanced hydrothermal pretreatment configurations. For example, passing water through a stationary bed of lignocellulosic biomass in a flowthrough configuration achieves very high yields of hemicellulose sugars, removes more than 75% of the lignin for potential valorization, and improves sugar release from the pretreated solids with lower enzyme loadings. Unfortunately, the large quantities of water needed to achieve this performance result in very dilute sugars, high energy costs for pretreatment and product recover, and large amounts of oligomers. Thus, improving our understanding of hydrothermal pretreatment fundamentals is needed to gain insights into R&D opportunities to improve performance, and help identify novel configurations that lower capital and operating costs and achieve higher yields.

  3. The best prostate biopsy scheme is dictated by the gland volume: a monocentric study.

    Science.gov (United States)

    Dell'Atti, L

    2015-08-01

    Accuracy of biopsy scheme depends on different parameters. Prostate-specific antigen (PSA) level and digital rectal examination (DRE) influenced the detection rate and suggested the biopsy scheme to approach each patient. Another parameter is the prostate volume. Sampling accuracy tends to decrease progressively with an increasing prostate volume. We prospectively observed detection cancer rate in suspicious prostate cancer (PCa) and improved by applying a protocol biopsy according to prostate volume (PV). Clinical data and pathological features of these 1356 patients were analysed and included in this study. This protocol is a combined scheme that includes transrectal (TR) 12-core PBx (TR12PBx) for PV ≤ 30 cc, TR 14-core PBx (TR14PBx) for PV > 30 cc but scheme, in 198 (14.6%) through TR14PBx scheme and in 253 (18.6%) through TR18PBx scheme. The PCa detection rate was increased by 44% by adding two TZ cores (TR14PBx scheme). The TR18PBx scheme increased this rate by 21.7% vs. TR14PBx scheme. The diagnostic yield offered by TR18PBx was statistically significant compared to the detection rate offered by the TR14PBx scheme (p scheme diagnostic yield and those detected by the TR18PBx scheme (p = 0.362). The only PV parameter, in our opinion, can be significant in choosing the best biopsy scheme to approach in a first setting of biopsies increasing PCa detection rate.

  4. Electrical Injection Schemes for Nanolasers

    DEFF Research Database (Denmark)

    Lupi, Alexandra; Chung, Il-Sug; Yvind, Kresten

    2014-01-01

    Three electrical injection schemes based on recently demonstrated electrically pumped photonic crystal nanolasers have been numerically investigated: 1) a vertical p-i-n junction through a post structure; 2) a lateral p-i-n junction with a homostructure; and 3) a lateral p-i-n junction....... For this analysis, the properties of different schemes, i.e., electrical resistance, threshold voltage, threshold current, and internal efficiency as energy requirements for optical interconnects are compared and the physics behind the differences is discussed....

  5. Time-and-ID-Based Proxy Reencryption Scheme

    Directory of Open Access Journals (Sweden)

    Kambombo Mtonga

    2014-01-01

    Full Text Available Time- and ID-based proxy reencryption scheme is proposed in this paper in which a type-based proxy reencryption enables the delegator to implement fine-grained policies with one key pair without any additional trust on the proxy. However, in some applications, the time within which the data was sampled or collected is very critical. In such applications, for example, healthcare and criminal investigations, the delegatee may be interested in only some of the messages with some types sampled within some time bound instead of the entire subset. Hence, in order to carter for such situations, in this paper, we propose a time-and-identity-based proxy reencryption scheme that takes into account the time within which the data was collected as a factor to consider when categorizing data in addition to its type. Our scheme is based on Boneh and Boyen identity-based scheme (BB-IBE and Matsuo’s proxy reencryption scheme for identity-based encryption (IBE to IBE. We prove that our scheme is semantically secure in the standard model.

  6. New pentose dimers with bicyclic moieties from pretreated biomass

    DEFF Research Database (Denmark)

    Rasmussen, H.; Sørensen, Henrik Rokkjær; Tanner, David Ackland

    2017-01-01

    oligophenolic compounds from pilot scale pretreated wheat straw was assessed at two different pretreatment severities. An increase in severity of the pretreatment led to more oligophenol compounds and in turn the total overall cellulase inhibition increased. When the xylooligosaccharides were enzymatically...... from either xylose or glucose reacting with glyceraldehyde during pretreatment. The data show that the main cellulase inhibition from hydrothermally pretreated wheat straw liquors is due to xylooligosaccharides followed by oligophenolic compounds and the newly discovered dipentose with bicyclic...

  7. Improved sugar yields from biomass sorghum feedstocks: comparing low-lignin mutants and pretreatment chemistries.

    Science.gov (United States)

    Godin, Bruno; Nagle, Nick; Sattler, Scott; Agneessens, Richard; Delcarte, Jérôme; Wolfrum, Edward

    2016-01-01

    For biofuel production processes to be economically efficient, it is essential to maximize the production of monomeric carbohydrates from the structural carbohydrates of feedstocks. One strategy for maximizing carbohydrate production is to identify less recalcitrant feedstock cultivars by performing some type of experimental screening on a large and diverse set of candidate materials, or by identifying genetic modifications (random or directed mutations or transgenic plants) that provide decreased recalcitrance. Economic efficiency can also be increased using additional pretreatment processes such as deacetylation, which uses dilute NaOH to remove the acetyl groups of hemicellulose prior to dilute acid pretreatment. In this work, we used a laboratory-scale screening tool that mimics relevant thermochemical pretreatment conditions to compare the total sugar yield of three near-isogenic brown midrib (bmr) mutant lines and the wild-type (WT) sorghum cultivar. We then compared results obtained from the laboratory-scale screening pretreatment assay to a large-scale pretreatment system. After pretreatment and enzymatic hydrolysis, the bmr mutants had higher total sugar yields than the WT sorghum cultivar. Increased pretreatment temperatures increased reactivity for all sorghum samples reducing the differences observed at lower reaction temperatures. Deacetylation prior to dilute acid pretreatment increased the total sugar yield for all four sorghum samples, and reduced the differences in total sugar yields among them, but solubilized a sizable fraction of the non-structural carbohydrates. The general trends of increased total sugar yield in the bmr mutant compared to the WT seen at the laboratory scale were observed at the large-scale system. However, in the larger reactor system, the measured total sugar yields were lower and the difference in total sugar yield between the WT and bmr sorghum was larger. Sorghum bmr mutants, which have a reduced lignin content showed

  8. Microwave pretreatment of switchgrass for bioethanol production

    Science.gov (United States)

    Keshwani, Deepak Radhakrishin

    Lignocellulosic materials are promising alternative feedstocks for bioethanol production. These materials include agricultural residues, cellulosic waste such as newsprint and office paper, logging residues, and herbaceous and woody crops. However, the recalcitrant nature of lignocellulosic biomass necessitates a pretreatment step to improve the yield of fermentable sugars. The overall goal of this dissertation is to expand the current state of knowledge on microwave-based pretreatment of lignocellulosic biomass. Existing research on bioenergy and value-added applications of switchgrass is reviewed in Chapter 2. Switchgrass is an herbaceous energy crop native to North America and has high biomass productivity, potentially low requirements for agricultural inputs and positive environmental impacts. Based on results from test plots, yields in excess of 20 Mg/ha have been reported. Environmental benefits associated with switchgrass include the potential for carbon sequestration, nutrient recovery from run-off, soil remediation and provision of habitats for grassland birds. Published research on pretreatment of switchgrass reported glucose yields ranging from 70-90% and xylose yields ranging from 70-100% after hydrolysis and ethanol yields ranging from 72-92% after fermentation. Other potential value-added uses of switchgrass include gasification, bio-oil production, newsprint production and fiber reinforcement in thermoplastic composites. Research on microwave-based pretreatment of switchgrass and coastal bermudagrass is presented in Chapter 3. Pretreatments were carried out by immersing the biomass in dilute chemical reagents and exposing the slurry to microwave radiation at 250 watts for residence times ranging from 5 to 20 minutes. Preliminary experiments identified alkalis as suitable chemical reagents for microwave-based pretreatment. An evaluation of different alkalis identified sodium hydroxide as the most effective alkali reagent. Under optimum pretreatment

  9. Effect of steam explosion and enzymatic pre-treatments on pulping and bleaching of Hesperaloe funifera.

    Science.gov (United States)

    Martín-Sampedro, R; Eugenio, M E; Villar, J C

    2012-05-01

    A non-wood raw material with high potential for pulp and paper applications (Hesperaloe funifera) was subjected to a steam explosion pre-treatment, and the subsequent effect of this pretreatment on biopulping and biobleaching was studied. An increase in the delignification rate, bigger than that reported for autohydrolysis and acid hydrolysis pre-treatments, and a reduction in chemical consumption were found during kraft pulping of the exploded samples. However, biopulping with the laccase-mediator system (LMS) did not lead to a reduction in the kappa number in either non-exploded or exploded unbleached pulps. On the other hand, the steam explosion pretreatment boosted the advantages of the LMS pre-treatment (decrease in kappa number and increase in brightness) favored biobleaching, with a 53.1% delignification rate and a final brightness of 67% ISO. Finally, the steam explosion pre-treatment also improved the color properties of the bleached pulp and reduced the hydrogen peroxide consumption by 24.6%. Copyright © 2012 Elsevier Ltd. All rights reserved.

  10. Physical pretreatments of wastewater algae to reduce ash content and improve thermal decomposition characteristics.

    Science.gov (United States)

    Chen, Wan-Ting; Ma, Junchao; Zhang, Yuanhui; Gai, Chao; Qian, Wanyi

    2014-10-01

    Previous study showed high ash content in wastewater algae (WA) has a negative effect on bio-crude oil formation in hydrothermal liquefaction (HTL). This study explored the effect of different pretreatments on ash reduction and the thermal decomposition of WA. Single-stage (e.g. centrifugation) and two-stage pretreatments (e.g. centrifugation followed by ultrasonication, C+U) were used. The apparent activation energy of the thermal decomposition (E(a)) of pretreated algae was determined. HTL was conducted to study how different pretreatments may impact on bio-crude oil formation. Compared to untreated samples, the ash content of algae with centrifugation was reduced from 28.6% to 18.6%. With C+U pretreatments, E(a) was decreased from 50.2 kJ/mol to 35.9 kJ/mol and the bio-crude oil yield was increased from 30% to 55%. These results demonstrate that pretreatments of C+U can improve the thermal decomposition behavior of WA and enhance the bio-crude oil conversion efficiency. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. Topochemical pretreatment of wood biomass to enhance enzymatic hydrolysis of polysaccharides to sugars.

    Science.gov (United States)

    Mou, Hong-Yan; Orblin, Elina; Kruus, Kristiina; Fardim, Pedro

    2013-08-01

    The surface chemistry of milled birch and pine wood pretreated by ionic liquid, hydrothermal and hydrotropic methods, followed by enzymatic hydrolysis was studied in this work. Surface coverage by lignin was measured by X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS) was used to describe the surface chemical composition after pretreatment in detail, and the morphology after pretreatment was investigated by FE-SEM. Ionic liquid (1-ethyl-3-methylimidazolium acetate, 1-butyl-3-methylimidazolium chloride) pretreatment at room temperature made the samples swell but did not dissolve the wood. Comparing the surface coverage by lignin, both in the case of birch and pine wood, hydrotropic worked best to remove the lignin hampering enzymatic hydrolysis. ToF-SIMS supported this finding, and showed that in birch, the carbohydrates were degraded more than in pine after hydrotropic pretreatment. The glucose yield of birch was improved by hydrotropic pretreatment from 5.1% to 83.9%, more significantly than in case of pine. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Enzymatic Pre-Treatment Increases the Protein Bioaccessibility and Extractability in Dulse (Palmaria palmata

    Directory of Open Access Journals (Sweden)

    Hanne K. Mæhre

    2016-10-01

    Full Text Available Several common protein extraction protocols have been applied on seaweeds, but extraction yields have been limited. The aims of this study were to further develop and optimize existing extraction protocols and to examine the effect of enzymatic pre-treatment on bioaccessibility and extractability of seaweed proteins. Enzymatic pre-treatment of seaweed samples resulted in a three-fold increase in amino acids available for extraction. Combining enzymatic pre-treatment with alkaline extraction resulted in a 1.6-fold increase in the protein extraction yield compared to a standard alkaline extraction protocol. A simulated in vitro gastrointestinal digestion model showed that enzymatic pre-treatment of seaweed increased the amount of amino acids available for intestinal absorption 3.2-fold. In conclusion, enzymatic pre-treatment of seaweeds is effective for increasing the amount of amino acids available for utilization and may thus be an effective means for increasing the utilization potential of seaweed proteins. However, both the enzymatic pre-treatment protocol and the protein extraction protocol need further optimization in order to obtain optimal cost-benefit and results from the in vitro gastrointestinal digestion model need to be confirmed in clinical models.

  13. On-chip pretreatment of whole blood by using MEMS technology

    CERN Document Server

    Chen, Xing

    2012-01-01

    Microfabrication technology has stimulated a plurality of lab-on-a-chip research and development efforts aimed at enabling biomedical researchers and health care practitioners to manipulate and analyze complex biological fluids at the nano and microliter scale. On-chip pretreatment of whole blood is one of the hottest topics in lab-on-a-chip research since whole blood has been regarded as the most important clinical sample. Various microfluidic chips for blood sample pretreatment, such as plasma isolation, cells separation, cells lysis, gene or protein purification, etc., are described in this

  14. Morphology of oxygen precipitates in silicon wafers pre-treated by rapid thermal annealing

    Energy Technology Data Exchange (ETDEWEB)

    Kot, D., E-mail: kot@ihp-microelectronics.com; Kissinger, G.; Schubert, M. A. [IHP, Im Technologiepark 25, 15236 Frankfurt (Oder) (Germany); Sattler, A. [Siltronic AG, Hanns-Seidel-Platz 4, 81737 München (Germany)

    2014-05-05

    The morphology of oxygen precipitates in Czochralski silicon wafers pre-treated by rapid thermal annealing (RTA) and subjected to a heat treatment in the temperature range between 800 °C and 1000 °C was investigated by scanning transmission electron microscopy. The samples were pre-treated by RTA in order to establish a defined supersaturation of vacancies. It was found that in such vacancy-rich samples subjected to an annealing at 800 °C three dimensional dendrites are formed. Until now, it was known that during annealing at 800 °C plate-like oxygen precipitates are formed.

  15. Distance labeling schemes for trees

    DEFF Research Database (Denmark)

    Alstrup, Stephen; Gørtz, Inge Li; Bistrup Halvorsen, Esben

    2016-01-01

    We consider distance labeling schemes for trees: given a tree with n nodes, label the nodes with binary strings such that, given the labels of any two nodes, one can determine, by looking only at the labels, the distance in the tree between the two nodes. A lower bound by Gavoille et al. [Gavoill...

  16. Distance labeling schemes for trees

    DEFF Research Database (Denmark)

    Alstrup, Stephen; Gørtz, Inge Li; Bistrup Halvorsen, Esben

    2016-01-01

    (log(n)) bits for constant ε> 0. (1 + ε)-stretch labeling schemes with polylogarithmic label size have previously been established for doubling dimension graphs by Talwar [Talwar, STOC, 2004]. In addition, we present matching upper and lower bounds for distance labeling for caterpillars, showing that labels...

  17. Homogenization scheme for acoustic metamaterials

    KAUST Repository

    Yang, Min

    2014-02-26

    We present a homogenization scheme for acoustic metamaterials that is based on reproducing the lowest orders of scattering amplitudes from a finite volume of metamaterials. This approach is noted to differ significantly from that of coherent potential approximation, which is based on adjusting the effective-medium parameters to minimize scatterings in the long-wavelength limit. With the aid of metamaterials’ eigenstates, the effective parameters, such as mass density and elastic modulus can be obtained by matching the surface responses of a metamaterial\\'s structural unit cell with a piece of homogenized material. From the Green\\'s theorem applied to the exterior domain problem, matching the surface responses is noted to be the same as reproducing the scattering amplitudes. We verify our scheme by applying it to three different examples: a layered lattice, a two-dimensional hexagonal lattice, and a decorated-membrane system. It is shown that the predicted characteristics and wave fields agree almost exactly with numerical simulations and experiments and the scheme\\'s validity is constrained by the number of dominant surface multipoles instead of the usual long-wavelength assumption. In particular, the validity extends to the full band in one dimension and to regimes near the boundaries of the Brillouin zone in two dimensions.

  18. Effect of pretreatment on rehydration, colour and nanoindentation properties of potato cylinders dried using a mixed-mode solar dryer.

    Science.gov (United States)

    Dhalsamant, Kshanaprava; Tripathy, Punyadarshini P; Shrivastava, Shanker L

    2017-08-01

    Desirable quality estimation is an important consumer driver for wider acceptability of mixed-mode solar drying of potatoes in food industries. The aim of this study is to characterise rehydration, colour, texture, nanoindentaion and microstructure of dried potato samples and to establish the influence of pre-drying treatment on the above qualities. The water absorption capacity and rehydration ability of solar dried potato were significantly influenced by pretreatment followed by rehydration temperature and sample diameter. The redness index (a*) of pretreated dried samples was lower with simultaneous higher value of yellowness index (b*), chroma (C*) and hue angle (h*). Also, the average nanohardness (H) of pretreated samples increased significantly by 22.64% compared to that of untreated samples. The average reduced modulus (Er ) and Young's modulus (Es ) of dried potato samples were 1.865 GPa and 1.403 GPa, respectively. Moreover, creep displacement of 43.27 nm was traced in the untreated potato samples during a 20 s dwell time under a constant load of 200 µN in the nanoindentation test. Micrographs revealed more uniform pore spaces in pretreated samples. Pretreated, thinner potato samples achieved better quality dried products in terms of rehydration, colour, texture and nanohardness indices with significantly improved microstructure and creep resistance properties. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  19. Temperature Modelling of the Biomass Pretreatment Process

    DEFF Research Database (Denmark)

    Prunescu, Remus Mihail; Blanke, Mogens; Jensen, Jakob M.

    2012-01-01

    that captures the environmental temperature differences inside the reactor using distributed parameters. A Kalman filter is then added to account for any missing dynamics and the overall model is embedded into a temperature soft sensor. The operator of the plant will be able to observe the temperature in any......In a second generation biorefinery, the biomass pretreatment stage has an important contribution to the efficiency of the downstream processing units involved in biofuel production. Most of the pretreatment process occurs in a large pressurized thermal reactor that presents an irregular temperature...... distribution. Therefore, an accurate temperature model is critical for observing the biomass pretreatment. More than that, the biomass is also pushed with a constant horizontal speed along the reactor in order to ensure a continuous throughput. The goal of this paper is to derive a temperature model...

  20. Extrusion pretreatment of pine wood chips.

    Science.gov (United States)

    Karunanithy, C; Muthukumarappan, K; Gibbons, W R

    2012-05-01

    Pretreatment is the first step to open up lignocellulose structure in the conversion of biomass to biofuels. Extrusion can be a viable pretreatment method due to its ability to simultaneously expose biomass to a range of disruptive conditions in a continuous flow process. Extruder screw speed, barrel temperature, and feedstock moisture content are important factors that can influence sugar recovery from biomass. Hence, the current study was undertaken to investigate the effects of these parameters on extrusion pretreatment of pine wood chips. Pine wood chip at 25, 35, and 45 % wb moisture content were pretreated at various barrel temperatures (100, 140, and 180 °C) and screw speeds (100, 150, and 200 rpm) using a screw with compression ratios of 3:1. The pretreated pine wood chips were subjected to standard enzymatic hydrolysis followed by sugar and byproducts quantification. Statistical analyses revealed the existence of significant differences in sugar recovery due to independent variables based on comparing the mean of main effects and interaction effects. Pine wood chips pretreated at a screw speed of 150 rpm and a barrel temperature of 180 °C with a moisture content of 25 % resulted in a maximum cellulose, hemicellulose, and total sugar recoveries of 65.8, 65.6, and 66.1 %, respectively, which was about 6.7, 7.9, and 6.8 fold higher than the control (unpretreated pine chips). Furthermore, potential fermentation inhibitors such as furfural, hydroxyl methyl furfural, and acetic acid were not found in any of the treatment combinations.

  1. Ultrasound pretreatment for enhanced biogas production from olive mill wastewater.

    Science.gov (United States)

    Oz, Nilgun Ayman; Uzun, Alev Cagla

    2015-01-01

    This study investigates applicability of low frequency ultrasound technology to olive mill wastewaters (OMWs) as a pretreatment step prior to anaerobic batch reactors to improve biogas production and methane yield. OMWs originating from three phase processes are characterized with high organic content and complex nature. The treatment of the wastewater is problematic and alternative treatment options should be investigated. In the first part of the study, OMW samples were subjected to ultrasound at a frequency of 20kHz with applied powers varying between 50 and 100W under temperature controlled conditions for different time periods in order to determine the most effective sonication conditions. The level of organic matter solubilization at ultrasound experiments was assessed by calculating the ratio of soluble chemical oxygen demand/total chemical oxygen demand (SCOD/TCOD). The results revealed that the optimum ultrasonic condition for diluted OMW is 20kHz, 0.4W/mL for 10min. The application of ultrasound to OMW increased SCOD/TCOD ratio from 0.59 to 0.79. Statistical analysis (Friedman's tests) show that ultrasound was significantly effective on diluted OMW (p0.05). For raw OMW, this increase has been found to be limited due to high concentration of suspended solids (SS). In the second part of the study, biogas and methane production rates of anaerobic batch reactor fed with the ultrasound pretreated OMW samples were compared with the results of control reactor fed with untreated OMW in order to determine the effect of sonication. A nonparametric statistical procedure, Mann-Whitney U test, was used to compare biogas and methane production from anaerobic batch reactors for control and ultrasound pretreated samples. Results showed that application of low frequency ultrasound to OMW significantly improved both biogas and methane production in anaerobic batch reactor fed with the wastewater (pbiogas and methane compared with the untreated one (control reactor). The

  2. Effect of ultrasound pretreatment on hot air drying rate of scallop muscles

    Science.gov (United States)

    Bai, Yaxiang; Fan, Xuejie; Bi, Yujing

    2017-05-01

    To improve the drying rate and to reduce the energy consumption of aquatic product, scallop muscles were treated by ultrasonic with different frequency, time and different temperature. The hot air drying rate of treated scallop muscles was determined, and, meanwhile, several quality parameters such as the shrinkage and rehydration rate of samples with pretreatment were determined to compare with those of untreated samples. The results indicated that the drying rate of scallop muscles can be improved by the ultrasonic pretreatment without affecting the quality. Under a 70 kHz for 30min at 25°C, the drying rate of pretreatments is 1.29 times higher compared with that of the control group.

  3. Effect of substrate pretreatment on particle size distribution in a full-scale research biogas plant.

    Science.gov (United States)

    Naegele, Hans-Joachim; Mönch-Tegeder, Matthias; Haag, Nicola Leonard; Oechsner, Hans

    2014-11-01

    The objective of this study was to investigate the pretreatment effects of high-fibre substrate on particle size distribution in a full-scale agricultural biogas plant (BGP). Two digesters, one fed with pretreated material and one with untreated material, were investigated for a period of 90days. Samples from different positions and heights were taken with a special probe sampling system and put through a wet sieve. The results show that on average 58.0±8.6% of the particles in both digesters are fine fraction (particles (13.1%) with a length >4mm was measured in the untreated digester. However, the volume distribution over all positions and heights did not show a clear and uniform distribution of particles. These results reveal that substrate pretreatment has an effect on particle size in the fermenting substrate, but due to the uneven distribution mixing, is not homogeneous within the digester. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Effect of pre-treatments on solar drying kinetics of red seedless grapes (cv. Monukka

    Directory of Open Access Journals (Sweden)

    Inês Nunes Ramos

    2014-10-01

    Full Text Available Two different pre-treatments were applied to grapes prior to drying in a mixed mode solar dryer. Grapes were blanched in water and in a 0.1% sunflower oil water emulsion, both at 99oC and for approximately 15 seconds. Several models were tested to fit the experimental data of drying curves but the normalized Newton model gave the best fit results. Samples blanched in hot water or in the 0.1% edible oil emulsion had faster drying rates than untreated samples. Contrary to what was expected, pre-treating with the 0.1% edible oil emulsion did not increase the drying rate to a higher extent than blanching. Pre-treatments did not give a noteworthy difference in the total drying time. However, they had an important role in accelerating initial drying rates, thus preventing moulds and bacterial growth and consequently increasing farmers’ income.

  5. Microbial pretreatment of cotton stalks by Phanerochaete chrysosporium for bioethanol production

    Science.gov (United States)

    Shi, Jian

    .04% for SmC and SSC pretreated samples, respectively) compared with untreated cotton stalk samples (17.93%). Washing of pretreated cotton stalks alone caused no significant increase in cellulose conversion. However, a heat treatment (autoclaving) followed by washing remarkably improved (P<0.05) cellulose conversion to 14.94% and 17.81% for SmC and SSC pretreatment, respectively. Mathematical models describing holocellulose consumption, lignin degradation, cellulase and ligninolytic enzyme production, and oxygen uptake associated with the growth of P. chrysosporium during 14 days fungal pretreatment were developed. For SmC pretreatment, model parameters were estimated by nonlinear regression and validated using an independent set of experimental data. Models yielded sufficiently accurate predictions for holocellulose consumption (R2=0.9772 and 0.9837, 1d and 3d oxygen flushing, respectively), lignin degradation (R2=0.9879 and 0.8682) and ligninolytic enzyme production (R2=0.8135 and 0.9693) under both 1 and 3d oxygen flushing conditions. However, the prediction capabilities for fungal growth (1d and 3d), cellulase production (3d) and oxygen uptake (3d) were limited. For SSC, the models were established in three phases (I: day 0-4, II: day 4-7, III: day 7-14). After validation it was shown that the developed models can yield sufficiently accurate predictions for fungal growth (R 2=0.9724), holocellulose consumption (R2=0.9686), lignin degradation (R2=0.9309) and ligninolytic enzyme production (R2=0.9203); however predictions of cellulase production were fair (R2=0.6133). Although significant delignification occurred during fungal pretreatment indicating the presence of ligninolytic enzymes, common spectrophotometric enzyme assays failed to detect lignin peroxidase (LiP) and manganese peroxidase (MnP) activities in fungal pretreatment cultures. Efforts were made to overcome the drawbacks of standardized assays by performing protein gel electrophoresis and crude enzyme

  6. Steam pretreatment for coal liquefaction. Final report, September 26, 1990--March 18, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Graff, R.A.; Balogh-Nair, V.; Ivanenko, O.; Brathwaite, C.

    1995-10-16

    The objective of this study is to demonstrate the use of subcritical steam to pretreat coal for slurry liquefaction, allowing liquefaction to be carried out at lower severity and improving product yield and quality. Samples of Illinois No. 6 coal were pretreated in 750 psia steam at 340{degree}C for 15 minutes. These samples, as well as raw coal, were liquefied at high (400{degree}C, 30 min.) and low (385{degree}C, 15 min.) severity conditions under 1500 psia hydrogen with tetralin as the donor solvent. Improved yields were obtained at both conditions. (Improved yields were not obtained at a liquefaction temperature of 350{degree}C as that put the sample into the region of retrogressive reactions). The deleterious effects of slow heating and exposure of the sample to air were demonstrated. Under low severity conditions, steam pretreatment more that doubled the oil yield, increasing it from 12.5 to 29 wt %. Tests were also conducted with aromatic ethers as model compounds. These were exposed to inert gas and steam at pretreatment conditions and in some cases to liquid water at 315{degree}C. {alpha}-Benzylnaphthyl ether and {alpha}- naphthylmethyl phenyl ether show little difference in conversion and product distribution when the thermolysis atmosphere is changed from inert gas to steam. However when these compounds were reacted in the presence of 5 {angstrom} zeolite, the yields of the thermolysis products improved. Zeolite proved effective in suppressing isomerization of the starting materials. These results suggested that zeolites might be beneficial in steam pretreatment of coal and in coal liquefaction. Pretreatment and liquefaction of mixtures of coal and zeolites increases yields of asphaltenes and preasphaltenes.

  7. Evaluation of Biological Pretreatment of Rubberwood with White Rot Fungi for Enzymatic Hydrolysis

    Directory of Open Access Journals (Sweden)

    Reza Zamiri

    2013-05-01

    Full Text Available e effects of biological pretreatment on the rubberwood (Hevea brasiliensis, was evaluated after cultivation of white rot fungi Ceriporiopsis subvermispora, Trametes versicolor, and a mixed culture of C. subvermispora and T. versicolor. The analysis of chemical compositions indicated that C. subvermispora had greater selectivity for lignin degradation with the highest lignin and hemicellulose loss at 45.06% and 42.08%, respectively, and lowest cellulose loss (9.50% after 90 days among the tested samples. X-ray analysis showed that pretreated samples had a higher crystallinity than untreated samples. The sample pretreated by C. subvermispora presented the highest crystallinity of all the samples which might be caused by the selective degradation of amorphous components. Fourier transform infrared (FT-IR spectroscopy demonstrated that the content of lignin and hemicellulose decreased during the biological pretreatment process. A study on hydrolysis of rubberwood treated with C. subvermispora, T. versicolor, and mixed culture for 90 days resulted in an increased sugar yield of about 27.67%, 16.23%, and 14.20%, respectively, as compared with untreated rubberwood (2.88%. The results obtained demonstrate that rubberwood is a potential raw material for industrial applications and white rot fungus C. subevermispora provides an effective method for improving the enzymatic hydrolysis of rubberwood.

  8. Biological Pretreatment of Oil Palm Frond Fiber Using White-Rot Fungi for Enzymatic Saccharification

    Directory of Open Access Journals (Sweden)

    Euis Hermiati

    2013-09-01

    Full Text Available Oil palm frond is one type of lignocellulosic biomass abundantly and daily available in Indonesia. It contains cellulose which can be converted to glucose, and further processed to produce different kinds of value –added products. The aim of this research is to study the effects of biological pretreatment of oil palm frond (OPF fiber using Phanerochaete chrysosporium and Trametes versicolor on the enzymatic saccharification of the biomass. The OPF fiber (40-60 mesh sizes was inoculated with cultures of the two fungi and incubated at 27 °C for 4 weeks. The samples were taken after 1, 2, 3, and 4 weeks of incubation. Chemical components of the biomass after pretreatment were analyzed. The saccharification of the pretreated samples using cellulase and β-glucosidase was performed in a water bath shaker at 50 °C for 48 hours. The concentration of reducing sugar increased with increasing of incubation time, either in those pretreated with culture of P. chrysosporium or with T. versicolor. Pretreatment of OPF fiber using single culture of T. versicolor for 4 weeks gave the highest reducing sugar yield (12.61% of dry biomass.

  9. Effect of pelleting on the recalcitrance and bioconversion of dilute-acid pretreated corn stover

    Energy Technology Data Exchange (ETDEWEB)

    Allison E Ray; Amber Hoover; Gary Gresham

    2012-07-01

    Background: Knowledge regarding the performance of densified biomass in biochemical processes is limited. The effects of densification on biochemical conversion are explored here. Methods: Pelleted corn stover samples were generated from bales that were milled to 6.35 mm. Low-solids acid pretreatment and simultaneous saccharification and fermentation were performed to evaluate pretreatment efficacy and ethanol yields achieved for pelleted and ground stover (6.35 mm and 2 mm) samples. Both pelleted and 6.35-mm ground stover were evaluated using a ZipperClave® reactor under high-solids, process-relevant conditions for multiple pretreatment severities (Ro), followed by enzymatic hydrolysis of the washed, pretreated solids. Results: Monomeric xylose yields were significantly higher for pellets (approximately 60%) than for ground formats (approximately 38%). Pellets achieved approximately 84% of theoretical ethanol yield (TEY); ground stover formats had similar profiles, reaching approximately 68% TEY. Pelleting corn stover was not detrimental to pretreatment efficacy for both low- and high-solids conditions, and even enhanced ethanol yields.

  10. Pretreatment on Corn Stover with Low Concentration of Formic Acid

    DEFF Research Database (Denmark)

    Xu, Jian; Thomsen, Mette Hedegaard; Thomsen, Anne Belinda

    2009-01-01

    the cellulose easily degraded into sugars and further fermented to ethanol. In this work, hydrothermal pretreatment on corn stover at 195 degrees for 15 min with and without lower concentration of formic acid was compared in terms of sugar recoveries and ethanol fermentation. For pretreatment with formic acid...... pretreatment without formic acid. Toxicity tests of liquor parts showed that there were no inhibitions found for both pretreatment conditions. After simultaneous saccharification and fermentation (SSF) of the pretreated corn stover with Baker's yeast, the highest ethanol yield of 76.5% of the theoretical...... was observed from corn stover pretreated at 195 degrees for 15min with formic acid....

  11. Support Schemes and Ownership Structures

    DEFF Research Database (Denmark)

    Ropenus, Stephanie; Schröder, Sascha Thorsten; Costa, Ana

    for promoting combined heat and power and energy from renewable sources. These Directives are to be implemented at the national level by the Member States. Section 3 conceptually presents the spectrum of national support schemes, ranging from investment support to market‐based operational support. The choice...... an introduction to the policy context for mCHP. Section 1 describes the rationale for the promotion of mCHP by explaining its potential contribution to European energy policy goals. Section 2 addresses the policy context at the supranational European level by outlining relevant EU Directives on support schemes......In recent years, fuel cell based micro‐combined heat and power has received increasing attention due to its potential contribution to energy savings, efficiency gains, customer proximity and flexibility in operation and capacity size. The FC4Home project assesses technical and economic aspects...

  12. Network Regulation and Support Schemes

    DEFF Research Database (Denmark)

    Ropenus, Stephanie; Schröder, Sascha Thorsten; Jacobsen, Henrik

    2009-01-01

    -in tariffs to market-based quota systems, and network regulation approaches, comprising rate-of-return and incentive regulation. National regulation and the vertical structure of the electricity sector shape the incentives of market agents, notably of distributed generators and network operators....... This article seeks to investigate the interactions between the policy dimensions of support schemes and network regulation and how they affect the deployment of distributed generation. Firstly, a conceptual analysis examines how the incentives of the different market agents are affected. In particular......At present, there exists no explicit European policy framework on distributed generation. Various Directives encompass distributed generation; inherently, their implementation is to the discretion of the Member States. The latter have adopted different kinds of support schemes, ranging from feed...

  13. Subranging scheme for SQUID sensors

    Science.gov (United States)

    Penanen, Konstantin I. (Inventor)

    2008-01-01

    A readout scheme for measuring the output from a SQUID-based sensor-array using an improved subranging architecture that includes multiple resolution channels (such as a coarse resolution channel and a fine resolution channel). The scheme employs a flux sensing circuit with a sensing coil connected in series to multiple input coils, each input coil being coupled to a corresponding SQUID detection circuit having a high-resolution SQUID device with independent linearizing feedback. A two-resolution configuration (course and fine) is illustrated with a primary SQUID detection circuit for generating a fine readout, and a secondary SQUID detection circuit for generating a course readout, both having feedback current coupled to the respective SQUID devices via feedback/modulation coils. The primary and secondary SQUID detection circuits function and derive independent feedback. Thus, the SQUID devices may be monitored independently of each other (and read simultaneously) to dramatically increase slew rates and dynamic range.

  14. Supporting Argumentation Schemes in Argumentative Dialogue Games

    Directory of Open Access Journals (Sweden)

    Wells Simon

    2014-03-01

    Full Text Available This paper reports preliminary work into the exploitation of argumentation schemes within dialogue games. We identify a property of dialogue games that we call “scheme awareness” that captures the relationship between dialogue game systems and argumentation schemes. Scheme awareness is used to examine the ways in which existing dialogue games utilise argumentation schemes and consequently the degree with which a dialogue game can be used to construct argument structures. The aim is to develop a set of guidelines for dialogue game design, which feed into a set of Dialogue Game Description Language (DGDL extensions in turn enabling dialogue games to better exploit argumentation schemes.

  15. An Arbitrated Quantum Signature Scheme without Entanglement*

    Science.gov (United States)

    Li, Hui-Ran; Luo, Ming-Xing; Peng, Dai-Yuan; Wang, Xiao-Jun

    2017-09-01

    Several quantum signature schemes are recently proposed to realize secure signatures of quantum or classical messages. Arbitrated quantum signature as one nontrivial scheme has attracted great interests because of its usefulness and efficiency. Unfortunately, previous schemes cannot against Trojan horse attack and DoS attack and lack of the unforgeability and the non-repudiation. In this paper, we propose an improved arbitrated quantum signature to address these secure issues with the honesty arbitrator. Our scheme takes use of qubit states not entanglements. More importantly, the qubit scheme can achieve the unforgeability and the non-repudiation. Our scheme is also secure for other known quantum attacks.

  16. A biometric signcryption scheme without bilinear pairing

    Science.gov (United States)

    Wang, Mingwen; Ren, Zhiyuan; Cai, Jun; Zheng, Wentao

    2013-03-01

    How to apply the entropy in biometrics into the encryption and remote authentication schemes to simplify the management of keys is a hot research area. Utilizing Dodis's fuzzy extractor method and Liu's original signcryption scheme, a biometric identity based signcryption scheme is proposed in this paper. The proposed scheme is more efficient than most of the previous proposed biometric signcryption schemes for that it does not need bilinear pairing computation and modular exponentiation computation which is time consuming largely. The analysis results show that under the CDH and DL hard problem assumption, the proposed scheme has the features of confidentiality and unforgeability simultaneously.

  17. Cambridge community Optometry Glaucoma Scheme.

    Science.gov (United States)

    Keenan, Jonathan; Shahid, Humma; Bourne, Rupert R; White, Andrew J; Martin, Keith R

    2015-04-01

    With a higher life expectancy, there is an increased demand for hospital glaucoma services in the United Kingdom. The Cambridge community Optometry Glaucoma Scheme (COGS) was initiated in 2010, where new referrals for suspected glaucoma are evaluated by community optometrists with a special interest in glaucoma, with virtual electronic review and validation by a consultant ophthalmologist with special interest in glaucoma. 1733 patients were evaluated by this scheme between 2010 and 2013. Clinical assessment is performed by the optometrist at a remote site. Goldmann applanation tonometry, pachymetry, monoscopic colour optic disc photographs and automated Humphrey visual field testing are performed. A clinical decision is made as to whether a patient has glaucoma or is a suspect, and referred on or discharged as a false positive referral. The clinical findings, optic disc photographs and visual field test results are transmitted electronically for virtual review by a consultant ophthalmologist. The number of false positive referrals from initial referral into the scheme. Of the patients, 46.6% were discharged at assessment and a further 5.7% were discharged following virtual review. Of the patients initially discharged, 2.8% were recalled following virtual review. Following assessment at the hospital, a further 10.5% were discharged after a single visit. The COGS community-based glaucoma screening programme is a safe and effective way of evaluating glaucoma referrals in the community and reducing false-positive referrals for glaucoma into the hospital system. © 2014 Royal Australian and New Zealand College of Ophthalmologists.

  18. Structural evaluation of sugar cane bagasse steam pretreated in the presence of CO2 and SO2

    Directory of Open Access Journals (Sweden)

    Corrales Roberta Cristina Novaes Reis

    2012-05-01

    Full Text Available Abstract Background Previous studies on the use of SO2 and CO2 as impregnating agent for sugar cane bagasse steam treatment showed comparative and promising results concerning the cellulose enzymatic hydrolysis and the low formation of the inhibitors furfural and hydroxymethylfurfural for the use of CO2 at 205°C/15 min or SO2 at 190°C/5 min. In the present study sugar cane bagasse materials pretreated as aforementioned were analyzed by scanning and transmission electron microscopy (SEM and TEM, X-Ray Diffraction (XRD and Infrared (FTIR spectroscopy aiming a better understanding of the structural and chemical changes undergone by the pretreated materials. Results SEM and TEM data showed that the structural modifications undergone by the pretreatment with CO2 were less pronounced in comparison to that using SO2, which can be directly related to the combined severity of each pretreatment. According to XRD data, untreated bagasse showed, as expected, a lower crystallinity index (CI = 48.0% when compared to pretreated samples with SO2 (CI = 65.5% or CO2 (CI = 56.4%, due to the hemicellulose removal of 68.3% and 40.5%, respectively. FTIR spectroscopy supported SEM, TEM and XRD results, revealing a more extensive action of SO2. Conclusions The SEM, TEM, XRD and FTIR spectroscopy techniques used in this work contributed to structural and chemical analysis of the untreated and pretreated bagasse. The images from SEM and TEM can be related to the severity of SO2 pretreatment, which is almost twice higher. The crystallinity index values obtained from XRD showed that pretreated materials have higher values when compared with untreated material, due to the partial removal of hemicellulose after pretreatment. FTIR spectroscopy supported SEM, TEM and XRD results. CO2 can actually be used as impregnating agent for steam pretreatment, although the present study confirmed a more extensive action of SO2.

  19. Pb2+ Biosorption by Pretreated Fungal Biomass

    OpenAIRE

    Çabuk,Ahmet; İLHAN, Semra; FİLİK, Cansu; ÇALIŞKAN, Figen

    2005-01-01

    The effect of pretreatment on the Pb2+ biosorption capacity of fungal biomasses, Aspergillus versicolor, Metarrhizium anisopliae var. anisopliae, and Penicillium verrucosum, was investigated. For this purpose, the biomasses were subjected to physical treatments such as heat and autoclaving, and chemical treatments such as sodium hydroxide, formaldehyde, gluteraldehyde, acetic acid, hydrogen peroxide, commercial laundry detergent, orthophosphoric acid and dimethyl sulfoxide. Dimethyl sulfoxid...

  20. Fermentation of pretreated corncob hemicellulose hydrolysate to ...

    African Journals Online (AJOL)

    To investigate the effect of unknown fermentation inhibitors in corncob hemicellulose acid hydrolysate processed by pretreatment and detoxification on fermentation, corncob hemicellulose acid hydrolysate and artificially prepared hydrolysate were fermented in parallel by Candida shehatae YHFK-2. The results show that ...

  1. Dissolved organic nitrogen measurement using dialysis pretreatment.

    Science.gov (United States)

    Lee, Wontae; Westerhoff, Paul

    2005-02-01

    Dissolved organic nitrogen (DON) is important for ecological and engineering researches. Quantification of low DON concentrations in waters with elevated dissolved inorganic nitrogen (DIN) using existing methods is inaccurate. In this study, a dialysis-based pretreatment technique was optimized and adopted to reduce the interference from DIN to the quantification of DON in natural water. A cellulose ester dialysis tube (nominal molecular weight cutoff = 100 Da) was used in batch and continuous-flow dialysis steps with model compounds, natural organic matter isolates, and bulk waters to develop a dialysis pretreatment approach that selectively reduces DIN from solutions containing DON. By reducing DIN concentrations, propagation of analytical variance in total dissolved nitrogen (TDN) and DIN species concentrations allows more accurate determination of DON (DON = TDN - NO3 - NO2- - NH3/NH4+). Dialysis for 24 h against continuously flowing distilled water reduced DIN species by 70%. With dialysis pretreatment, DON recoveries of more than 95% were obtained for surface water and finished drinking water, but wastewater experienced a slight loss (approximately 10%) of DON possibly due to the adsorption of organics onto the dialysis membrane, permeation of low molecular weight fractions, or biodegradation. Dialysis experiments using surface water spiked with different DIN/TDN ratios concluded that dialysis pretreatment leads to more accurate DON determination than no dialysis when DIN/TDN ratios exceed 0.6 mg of N/mg of N.

  2. Two phase sampling

    CERN Document Server

    Ahmad, Zahoor; Hanif, Muhammad

    2013-01-01

    The development of estimators of population parameters based on two-phase sampling schemes has seen a dramatic increase in the past decade. Various authors have developed estimators of population using either one or two auxiliary variables. The present volume is a comprehensive collection of estimators available in single and two phase sampling. The book covers estimators which utilize information on single, two and multiple auxiliary variables of both quantitative and qualitative nature. Th...

  3. The Perception of the Contributory Pension Scheme Administration ...

    African Journals Online (AJOL)

    info

    Abstract. This paper x-ray the perception of the staff of University of Benin on the contributory pension scheme administration. The research instruments used in the data collection were structured questionnaire and face to face interview. A sample size of 250 made up of both the academic and non-academic staff were ...

  4. Trial of car-sharing scheme at CERN

    CERN Multimedia

    Maximilien Brice

    2010-01-01

    On 6 July, a sample group of approximately 500 users started a six-month trial of a new car-sharing scheme. The project is an initiative of the General Infrastructure Services Department (GS), in collaboration with the Physics Department (PH) and Hertz car rentals.

  5. An Analysis Of Loko Flood Disaster Resettlement Scheme, In Song ...

    African Journals Online (AJOL)

    The study examines the socio-economic and political impediments to the planned resettlement scheme for Loko flood disaster victims. A simple random sampling technique was employed to interview 280 household heads by administering to each a questionnaire schedule. Furthermore, purposeful interviews with the ...

  6. The British American Tobacco out growers scheme: Determinants of ...

    African Journals Online (AJOL)

    The study analyzed the operation and performance of Tobacco Out grower Scheme in Oyo State, Nigeria. The data for the analysis came from a random sample survey of the area of study. The treatment effect model was adopted in analyzing the data. Evidence from the probit analysis indicates that membership of the ...

  7. Enrolment on Health Insurance Scheme in Ghana: Evidence from ...

    African Journals Online (AJOL)

    Multistage sampling procedure was used to select the respondents. Binary logit model was used to estimate the determinants of enrolment to the scheme. The findings show that factors such as age, occupation, place of residence, income and wealth, play an important role in shaping individuals' and households' decision ...

  8. The perception of the contributory pension scheme administration by ...

    African Journals Online (AJOL)

    This paper x-ray the perception of the staff of University of Benin on the contributory pension scheme administration. The research instruments used in the data collection were structured questionnaire and face to face interview. A sample size of 250 made up of both the academic and non-academic staff were selected from ...

  9. Alkali (NaOH) Pretreatment of Switchgrass by Radio Frequency-based Dielectric Heating

    Science.gov (United States)

    Hu, Zhenhu; Wang, Yifen; Wen, Zhiyou

    Radio-frequency (RF)-based dielectric heating was used in the alkali (NaOH) pre-treatment of switchgrass to enhance its enzymatic digestibility. Due to the unique features of RF heating (i.e., volumetric heat transfer, deep heat penetration of the samples, etc.), switchgrass could be treated on a large scale, high solid content, and uniform temperature profile. At 20% solid content, RF-assisted alkali pretreatment (at 0.1 g NaOH/g biomass loading and 90°C) resulted in a higher xylose yield than the conventional heating pretreatment. The enzymatic hydrolysis of RF-treated solids led to a higher glucose yield than the corresponding value obtained from conventional heating treatment. When the solid content exceeded 25%, conventional heating could not handle this high-solid sample due to the loss of fluidity, poor mixing, and heating transfer of the samples. As a result, there was a significantly lower sugar yield, but the sugar yield of the RF-based pretreatment process was still maintained at high levels. Furthermore, the optimal particle size and alkali loading in the RF pretreatment was determined as 0.25-0.50 mm and 0.25 g NaOH/g biomass, respectively. At alkali loading of 0.20-0.25 g NaOH/g biomass, heating temperature of 90°C, and solid content of 20%, the glucose, xylose, and total sugar yield from the combined RF pretreatment and the enzymatic hydrolysis were 25.3, 21.2, and 46.5 g/g biomass, respectively.

  10. Kinetic studies of cellulose enzymatic hydrolysis from pretreated corn cob

    Science.gov (United States)

    Stevanie, Jeannie; Kartawiria, Irvan; Abimanyu, Haznan

    2017-01-01

    Successful utilization of corn cob biomass as raw material in bioethanol production is depending on the hydrolysis process where high level of β-cellulose is converted into glucose. Enzymatic hydrolysis is the common process for this purpose. This study is focusing on the evaluation of hydrolysis of pre-treated corn cob using Novozymes Cellic ® C-Tec2 and H-Tec2 enzymes to obtain the optimum reaction condition and its general reaction kinetics. The corn cob used was pretreated using 10% of NaOH solution. Hydrolysis reactions were conducted in 250 ml Erlenmeyer flask for 72 hour using mixture of C-Tec2 and H-Tec2 enzymes at the fixed ratio of 5:1 and glucose concentration were measured using HPLC. Reaction temperature of 40°C and quantity of 0.5 ml enzyme solution per gram substrate gives the highest reaction rate (0.0123 gram of glucose/gram sample.h) with the glucose yield being 0.089 g glucose/ g substrate. Total conversion of cellulose observed was 11.91 %. Corn cob hydrolysis using C-Tec2 and H-Tec2 enzymes also result in xylose (0.0202 g/g substrate), which can also contribute to bioethanol productivity in further fermentation process. The reaction is following zero order kinetics for the first 8 hours and reaches maximum yield within 10 hours; significantly shorter compared to previous studies of cellulosic material hydrolysis that may take up to 72 hour to complete. Prolonging the hydrolysis of pre-treated corn cob more than 24 hour gives no significant increase in glucose conversion and yield. Hydrolysis temperature range of 40°C to 60°C is in accordance with the manufacturer recommendation for the purpose; however the decrease of reaction rate is observable at temperature 50°C or higher.

  11. Pretreatment of Reed by Wet Oxidation and Subsequent Utilization of the Pretreated Fibers for Ethanol Production

    DEFF Research Database (Denmark)

    Szijarto, Nora; Kádár, Zsófia; Varga, Eniko

    2009-01-01

    lignocelluloses usually do. In the present study, wet oxidation was investigated as the pretreatment method to enhance the enzymatic digestibility of reed cellulose to soluble sugars and thus improve the convertibility of reed to ethanol. The most effective treatment increased the digestibility of reed cellulose...... of cellulose to glucose was 82.4%. Simultaneous saccharification and fermentation of pretreated solids resulted in a final ethanol concentration as high as 8.7 g/L, yielding 73% of the theoretical....

  12. METAPHORIC MECHANISMS IN IMAGE SCHEME DEVELOPMENT

    National Research Council Canada - National Science Library

    Pankratova, S.A

    2017-01-01

    .... In the summary the author underscores that both ways of image scheme development are of importance to cognitive science, both heuristic epiphora and image-based diaphora play a significant role in the explication of image scheme development.

  13. Ozone pretreatment and fermentative hydrolysis of wheat straw

    Science.gov (United States)

    Ben'ko, E. M.; Chukhchin, D. G.; Lunin, V. V.

    2017-11-01

    Principles of the ozone pretreatment of wheat straw for subsequent fermentation into sugars are investigated. The optimum moisture contents of straw in the ozonation process are obtained from data on the kinetics of ozone absorbed by samples with different contents of water. The dependence of the yield of reducing sugars in the fermentative reaction on the quantity of absorbed ozone is established. The maximum conversion of polysaccharides is obtained at ozone doses of around 3 mmol/g of biomass, and it exceeds the value for nonozonated samples by an order of magnitude. The yield of sugar falls upon increasing the dose of ozone. The process of removing lignin from the cell walls of straw during ozonation is visualized by means of scanning electron microscopy.

  14. [Comparison of two gastric cancer screening schemes in a high-risk population].

    Science.gov (United States)

    Lü, Yan-li; Li, Yi; Liu, Guang-shun; Wu, Qi; Liu, Wei-dong; Li, Shi-jie; Cao, Chang-qi; Wu, Xiu-zhen; Liu, Dong-mei; Zhang, Lei; Zhang, Lan-fu; Ma, Jun-ling; Pan, Kai-feng; Zhang, Lian; You, Wei-cheng

    2013-05-01

    To evaluate the effects of two gastric cancer screening schemes for early detection of gastric cancer in a high-risk population. A cluster random sampling method was used to select local residents aged 40-69 years from Linqu County, Shandong Province. "Serum pepsinogen initial screening combined with further endoscopic examination (PG scheme)" and "direct endoscopic examination (endoscopy scheme)" were conducted. The associations between screening schemes and detection rates of gastric cancer, and early gastric cancer/high-grade intraepithelial neoplasia were evaluated by unconditional logistic regression analysis. Overall, 3654 and 2290 participants completed PG and endoscopy schemes, respectively. A total of 11 (0.30%) cases of gastric cancer and 10 (0.27%) cases of high-grade intraepithelial neoplasia were detected by PG scheme, of which 7 (0.19%) cases were early gastric cancer. While, 19 (0.83%) cases of gastric cancer and 10 (0.44%) cases of high-grade intraepithelial neoplasia were detected by endoscopy scheme, with 12 (0.52%) cases of early gastric cancer. Compared with the PG scheme, the endoscopy scheme had a significantly higher detection rates of gastric cancer (OR = 2.83, 95%CI 1.34-5.98), and early gastric cancer/high-grade intraepithelial neoplasia (OR = 2.12, 95%CI 1.12-4.02). The endoscopy scheme is more effective in the detection of gastric cancer in a high-risk population, particularly for early gastric cancer/high-grade intraepithelial neoplasia than the PG scheme.

  15. 'Just another incentive scheme': a qualitative interview study of a local pay-for-performance scheme for primary care.

    Science.gov (United States)

    Hackett, Julia; Glidewell, Liz; West, Robert; Carder, Paul; Doran, Tim; Foy, Robbie

    2014-10-25

    A range of policy initiatives have addressed inequalities in healthcare and health outcomes. Local pay-for-performance schemes for primary care have been advocated as means of enhancing clinical ownership of the quality agenda and better targeting local need compared with national schemes such as the UK Quality and Outcomes Framework (QOF). We investigated whether professionals' experience of a local scheme in one English National Health Service (NHS) former primary care trust (PCT) differed from that of the national QOF in relation to the goal of reducing inequalities. We conducted retrospective semi-structured interviews with primary care professionals implementing the scheme and those involved in its development. We purposively sampled practices with varying levels of population socio-economic deprivation and achievement. Interviews explored perceptions of the scheme and indicators, likely mechanisms of influence on practice, perceived benefits and harms, and how future schemes could be improved. We used a framework approach to analysis. Thirty-eight professionals from 16 general practices and six professionals involved in developing local indicators participated. Our findings cover four themes: ownership, credibility of the indicators, influences on behaviour, and exacerbated tensions. We found little evidence that the scheme engendered any distinctive sense of ownership or experiences different from the national scheme. Although the indicators and their evidence base were seldom actively questioned, doubts were expressed about their focus on health promotion given that eventual benefits relied upon patient action and availability of local resources. Whilst practices serving more affluent populations reported status and patient benefit as motivators for participating in the scheme, those serving more deprived populations highlighted financial reward. The scheme exacerbated tensions between patient and professional consultation agendas, general practitioners

  16. The Ubiquity of Smooth Hilbert Schemes

    OpenAIRE

    Staal, Andrew P.

    2017-01-01

    We investigate the geography of Hilbert schemes that parametrize closed subschemes of projective space with a specified Hilbert polynomial. We classify Hilbert schemes with unique Borel-fixed points via combinatorial expressions for their Hilbert polynomials. We realize the set of all nonempty Hilbert schemes as a probability space and prove that Hilbert schemes are irreducible and nonsingular with probability greater than $0.5$.

  17. MIRD radionuclide data and decay schemes

    CERN Document Server

    Eckerman, Keith F

    2007-01-01

    For all physicians, scientists, and physicists working in the nuclear medicine field, the MIRD: Radionuclide Data and Decay Schemes updated edition is an essential sourcebook for radiation dosimetry and understanding the properties of radionuclides. Includes CD Table of Contents Decay schemes listed by atomic number Radioactive decay processes Serial decay schemes Decay schemes and decay tables This essential reference for nuclear medicine physicians, scientists and physicists also includes a CD with tabulations of the radionuclide data necessary for dosimetry calculations.

  18. Thermal pre-treatment of wet microalgae harvest for efficient hydrocarbon recovery

    Energy Technology Data Exchange (ETDEWEB)

    Kita, K.; Okada, S.; Sekino, H.; Imou, K.; Yokoyama, S. [Laboratory of Biological and Mechanical Engineering, Graduate School of Agricultural and Life Sciences, The University of Tokyo, Tokyo 113-8657 (Japan); Amano, T. [Technology Research Institute, Tokyo Gas Co., Ltd., 1-7-7 Suehiro-cho, Tsurumi-ku Yokohama, Kanagawa 230-0045 (Japan)

    2010-07-15

    Botryococcus braunii, a green colonial microalga, is an unusually rich renewable source of hydrocarbons. In this study, wet microalgae harvest was thermally pretreated to enhance hydrocarbon recovery using a solvent extraction process. Samples containing a mixture of B. braunii and water were kept below 100 C for 10 min. The observed hydrocarbon recovery was 97.8% at 90 C. The extraction results suggest that the energy-intensive concentration and drying processes of the harvest could be eliminated. The proposed thermal pretreatment would revolutionize the conventional downstream processes. (author)

  19. THROUGHPUT ANALYSIS OF EXTENDED ARQ SCHEMES

    African Journals Online (AJOL)

    PUBLICATIONS1

    and Wait (SW), Selective Repeat (SR), Stutter. (ST) and Go-Back-N (GBN) (Lin and Costello,. 2003). Combinations of these schemes lead to mixed mode schemes which include the SR-. GBN, SR-ST1 and SR-ST2. In the mixed mode schemes, when a prescribed number of failures occur in the SR mode, the GBN or ST ...

  20. Design of Infusion Schemes for Neuroreceptor Imaging

    DEFF Research Database (Denmark)

    Feng, Ling; Svarer, Claus; Madsen, Karine

    2016-01-01

    for bolus infusion (BI) or programmed infusion (PI) experiments. Steady-state quantitative measurements can be made with one short scan and venous blood samples. The GABAA receptor ligand [(11)C]Flumazenil (FMZ) was chosen for this purpose, as it lacks a suitable reference region. Methods. Five bolus [(11)C...... state was attained within 40 min, which was 8 min earlier than the optimal BI (B/I ratio = 55 min). Conclusions. The system can design both BI and PI schemes to attain steady state rapidly. For example, subjects can be [(11)C]FMZ-PET scanned after 40 min of tracer infusion for 40 min with venous...

  1. The Original Management Incentive Schemes

    OpenAIRE

    Richard T. Holden

    2005-01-01

    During the 1990s, the structure of pay for top corporate executives shifted markedly as the use of stock options greatly expanded. By the early 2000s, as the dot-com boom ended and the Nasdaq stock index melted down, these modern executive incentive schemes were being sharply questioned on many grounds—for encouraging excessive risk-taking and a short-run orientation, for being an overly costly and inefficient method of providing incentives, and even for tempting managers of firms like Enron,...

  2. Adaptive Optics Metrics & QC Scheme

    Science.gov (United States)

    Girard, Julien H.

    2017-09-01

    "There are many Adaptive Optics (AO) fed instruments on Paranal and more to come. To monitor their performances and assess the quality of the scientific data, we have developed a scheme and a set of tools and metrics adapted to each flavour of AO and each data product. Our decisions to repeat observations or not depends heavily on this immediate quality control "zero" (QC0). Atmospheric parameters monitoring can also help predict performances . At the end of the chain, the user must be able to find the data that correspond to his/her needs. In Particular, we address the special case of SPHERE."

  3. The mathematics of Ponzi schemes

    OpenAIRE

    Artzrouni, Marc

    2009-01-01

    A first order linear differential equation is used to describe the dynamics of an investment fund that promises more than it can deliver, also known as a Ponzi scheme. The model is based on a promised, unrealistic interest rate; on the actual, realized nominal interest rate; on the rate at which new deposits are accumulated and on the withdrawal rate. Conditions on these parameters are given for the fund to be solvent or to collapse. The model is fitted to data available on Charles...

  4. Superposition Enhanced Nested Sampling

    Science.gov (United States)

    Martiniani, Stefano; Stevenson, Jacob D.; Wales, David J.; Frenkel, Daan

    2014-07-01

    The theoretical analysis of many problems in physics, astronomy, and applied mathematics requires an efficient numerical exploration of multimodal parameter spaces that exhibit broken ergodicity. Monte Carlo methods are widely used to deal with these classes of problems, but such simulations suffer from a ubiquitous sampling problem: The probability of sampling a particular state is proportional to its entropic weight. Devising an algorithm capable of sampling efficiently the full phase space is a long-standing problem. Here, we report a new hybrid method for the exploration of multimodal parameter spaces exhibiting broken ergodicity. Superposition enhanced nested sampling combines the strengths of global optimization with the unbiased or athermal sampling of nested sampling, greatly enhancing its efficiency with no additional parameters. We report extensive tests of this new approach for atomic clusters that are known to have energy landscapes for which conventional sampling schemes suffer from broken ergodicity. We also introduce a novel parallelization algorithm for nested sampling.

  5. Superposition Enhanced Nested Sampling

    Directory of Open Access Journals (Sweden)

    Stefano Martiniani

    2014-08-01

    Full Text Available The theoretical analysis of many problems in physics, astronomy, and applied mathematics requires an efficient numerical exploration of multimodal parameter spaces that exhibit broken ergodicity. Monte Carlo methods are widely used to deal with these classes of problems, but such simulations suffer from a ubiquitous sampling problem: The probability of sampling a particular state is proportional to its entropic weight. Devising an algorithm capable of sampling efficiently the full phase space is a long-standing problem. Here, we report a new hybrid method for the exploration of multimodal parameter spaces exhibiting broken ergodicity. Superposition enhanced nested sampling combines the strengths of global optimization with the unbiased or athermal sampling of nested sampling, greatly enhancing its efficiency with no additional parameters. We report extensive tests of this new approach for atomic clusters that are known to have energy landscapes for which conventional sampling schemes suffer from broken ergodicity. We also introduce a novel parallelization algorithm for nested sampling.

  6. Rapid near infrared spectroscopy for prediction of enzymatic hydrolysis of corn bran after various pretreatments

    DEFF Research Database (Denmark)

    Baum, Andreas; Wittrup Agger, Jane; Meyer, Anne S.

    2012-01-01

    step is to increase the responsivity of the substrate to enzymatic attack and the type of pretreatment affects the enzymatic conversion efficiency. Destarched corn bran is a fibrous, heteroxylan-rich side-stream from the starch industry which may be used as a feedstock for bioethanol production...... or as a source of xylose for other purposes. In the present study we demonstrate the use of diffuse reflectance near infrared spectroscopy (NIR) as a rapid and non-destructive analytical tool for evaluation of pretreatment effects on destarched corn bran. NIR was used to achieve classification between 43...... differently pretreated corn bran samples using principal component analysis (PCA) and hierarchal clustering algorithms. Quantification of the enzymatically released monosaccharides by HPLC was used to design multivariate calibration models (biPLS) on the NIR spectra. The models could predict the enzymatic...

  7. Sequential enzymatic saccharification and fermentation of ionic liquid and organosolv pretreated agave bagasse for ethanol production

    Energy Technology Data Exchange (ETDEWEB)

    Pérez-Pimienta, Jose A. [Univ. Autonoma de Nayarit, Tepic (Mexico); Vargas-Tah, Alejandra [Univ. Nacional Autonoma de Mexico (UNAM), Cuernavaca (Mexico).; López-Ortega, Karla M. [Univ. Autonoma de Nayarit, Tepic (Mexico); Medina-López, Yessenia N. [Univ. Autonoma de Nayarit, Tepic (Mexico); Mendoza-Pérez, Jorge A. [Inst. Politecnico Nacional (IPN), Mexico City (Mexico); Avila, Sayeny [Joint BioEnergy Inst. (JBEI), Emeryville, CA (United States); Singh, Seema [Joint BioEnergy Inst. (JBEI), Emeryville, CA (United States); Sandia National Lab. (SNL-CA), Livermore, CA (United States); Simmons, Blake A. [Joint BioEnergy Inst. (JBEI), Emeryville, CA (United States); Sandia National Lab. (SNL-CA), Livermore, CA (United States); Loaces, Inés [Univ. Nacional Autonoma de Mexico (UNAM), Cuernavaca (Mexico).; Martinez, Alfredo [Univ. Nacional Autonoma de Mexico (UNAM), Cuernavaca (Mexico).

    2016-11-16

    Agave bagasse (AGB) has gained recognition as a drought-tolerant biofuel feedstock with high productivity in semiarid regions. A comparative analysis of ionic liquid (IL) and organosolv (OV) pretreatment technologies in AGB was performed using a sequential enzymatic saccharification and fermentation (SESF) strategy with cellulolytic enzymes and the ethanologenic Escherichia coli strain MS04. After pretreatment, 86% of xylan and 45% of lignin were removed from OV-AGB, whereas IL-AGB reduced lignin content by 28% and xylan by 50% when compared to the untreated biomass. High glucan ( > 90%) and xylan ( > 83%) conversion was obtained with both pretreated samples. During the fermentation stage (48 h), 12.1 and 12.7 kg of ethanol were produced per 100 kg of untreated AGB for IL and OV, respectively. These comparative analyses showed the advantages of SESF using IL and OV in a biorefinery configuration where a better understanding of AGB recalcitrance is key for future applications.

  8. Comparison on structural modification of industrial lignin by wet ball milling and ionic liquid pretreatment

    Directory of Open Access Journals (Sweden)

    Yongshui Qu

    2015-06-01

    Full Text Available As the most abundant aromatic compounds, lignin is still underutilized due to its relatively low quality. In order to improve its quality, two pretreatment technologies, wet ball milling (WBM and ionic liquid pretreatment (ILP were tested on the industrial lignin and evaluated on the average molecular weight and polydispersity, surface morphology, and functional groups changes. The results showed that the lignin pretreated by the WBM with phosphoric acid presented dramatic decrease of polydipersity (23% and increase of phenolic hydroxyl content (9%. While, the ILP treated samples exhibited the significant reduction of the average molecular weight and polydispersity. The decrease on the particle size and the emergence of the porous structure were found when treated with [Emim][OAc]. In addition, the remarkable reduction of the methoxy groups were observed to be 50% and 45% after treated with [Bmim]Cl and [Emim][OAc], respectively.

  9. The effect of acid hydrolysis pretreatment on crystallinity and solubility of kenaf cellulose membrane

    Energy Technology Data Exchange (ETDEWEB)

    Saidi, Anis Syuhada Mohd; Zakaria, Sarani; Chia, Chin Hua; Jaafar, Sharifah Nabihah Syed; Padzil, Farah Nadia Mohammad [School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor (Malaysia)

    2015-09-25

    Cellulose was extracted from kenaf core pulp (KCP) by series of bleaching steps in the sequence (DEED) where D and E are referred as acid and alkali treatment. The bleached kenaf pulp (BKCP) is then pretreated with acid hydrolysis at room temperature for 1 and 3 h respectively. The pretreated cellulose is dissolved in lithium hydroxide/urea (LiOH/urea) and cellulose solution produced was immersed in distilled water bath. BKCP without treatment was also conducted for comparison purpose. The effects of acid hydrolysis pretreatment on solubility and crystallinity are investigated. Higher solubility of cellulose solution is achieved for treated samples. Cellulose II formation and crystallinity index of the cellulose membrane were determined by X-ray diffraction (XRD)

  10. Impact analysis of different chemical pre-treatments on colour of apple discs during drying process

    Directory of Open Access Journals (Sweden)

    Jasmina Lukinac

    2009-01-01

    Full Text Available The main purpose of this study was to compare colour changes of chemically pre-treated dried apple discs. Changes were observed by chromameter in L*a*b* colour model by using Minolta chromameter CR-400 and by image analysis system in RGB colour model. Apple discs variety "Gold Rush" were pre-treated and dried in laboratory tray drier at drying temperature 70 °C and at airflow velocity of 1.5 ms-1. Different chemical pre-treatments were applied on apple discs (dipping in 0.5% ascorbic acid solution; 0.3% L–cysteine solution; 0.1% 4–hexyl resorcinol solution and 1% sodium metabisulphite solution. Mean values of colour parameters, colour changes and correlation coefficients for apple discs were calculated for both colour models. The analysis showed statistically significant influence of pre-treatment method on total colour changes for both chosen colour models of dried apples. Calculated correlation coefficient between colour changes for used models was found to be 0.894. According to colour characteristics the best results were achieved when samples were pre-treated with 0.5% ascorbic acid solution. According to calculated results it was found that image analysis method as well as colorimetric method can be used to observe the colour changes on dried apple discs.

  11. Variation in ultrasonic frequency and time as pre-treatments to air-drying of carrot

    Directory of Open Access Journals (Sweden)

    Ernest Ekow Abano

    2013-03-01

    Full Text Available Vegetable drying is an alternative method to curb post harvest decay of vegetables and a process to produce dried vegetables, which can be directly consumed or used as ingredients for the preparation of soups, stews, baby foods, cakes, puddings, and many other foods. In this study, the effect of ultrasound frequency and sonication time as pre-treatment prior to air drying at 70°C at an air velocity of 0.5 m/s, on carrot drying kinetics, flavour, colour, and non-enzymatic browning was investigated using a 3-level factorial response surface method. The result showed that an increase in sonication frequency and time did not significantly increase moisture diffusivity but in comparison with the control, water diffusivity increased after ultrasound application and the overall drying time was reduced. Application of the ultrasound pre-treatment in distilled water resulted in water gain and sugar loss, indicating that the ultrasonic pre-treatment can be an important step to produce low sugar content dried products. The brightness and redness to yellowness values of the ultrasonically pre-treated dried carrots were better than those without ultrasound application. In comparison with the flavour of the control, the ultrasound pre-treated samples recorded higher flavour response signals, indicating that the application of ultrasound improved the flavour of the dried carrot. The variation in sonication frequency and time did not significantly affect the non-enzymatic browning index of the dried products but were better than the control.

  12. Microalgae pretreatment with liquid hot water to enhance enzymatic hydrolysis efficiency.

    Science.gov (United States)

    Yuan, Tao; Li, Xiekun; Xiao, Shiyuan; Guo, Ying; Zhou, Weizheng; Xu, Jingliang; Yuan, Zhenhong

    2016-11-01

    Nowadays, microalgae are being considered as promising raw material for bioethanol production. In this work, three process variables during liquid hot water (LHW) pretreatment prior to enzymatic hydrolysis by response surface methodology on Scenedesmus sp. WZKMT were investigated to enhance glucose recovery. Results indicated that the order of significance for three parameters was temperature>solid-to-liquid ratio>time. The optimal condition was 1:13 (w/v), 147°C and 40min. The concentration and recovery of glucose under this condition were 14.223g·L(-1) and 89.32%, respectively, which were up to 5-fold higher than the samples without LHW pretreatment. In addition, the surface morphologies of microalgae cells before and after LHW pretreatment were also verified using scanning electron microscopy (SEM). LHW pretreatment can greatly enhance the enzymatic efficiency, and can be regarded as an ideal pretreatment method for glucose recovery from microalgae. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Enhancement of high-solids enzymatic hydrolysis of corncob residues by bisulfite pretreatment for biorefinery.

    Science.gov (United States)

    Xing, Yang; Bu, Lingxi; Zheng, Tianran; Liu, Shijie; Jiang, Jianxin

    2016-12-01

    Co-production of glucose, furfural and other green materials based on a lignocellulosic biorefinery is a promising way to realize the commercial application of corncob residues. An effective process was developed for glucose production using low temperature bisulfite pretreatment and high-solids enzymatic hydrolysis. Corncob residues from furfural production (FRs) were pretreated with 0.1g NaHSO3/g dry substrate at 100°C for 3h. Lignin was sulfonated and sulfonic groups were produced during pretreatment, which resulted in decreasing the zeta potential of the samples. Compared with raw material, bisulfite pretreatment of FRs increased the glucose yield from 18.6 to 99.45% after 72h hydrolysis at a solids loading of 12.5%. The hydrolysis residues showed a relatively high thermal stability and concentrated high derivatives. Direct pretreatment followed by enzymatic hydrolysis is an environmentally-friendly and economically-feasible method for the production of glucose and high-purity lignin, which could be further converted into high-value products. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Enhancement of biomass conversion in catalytic fast pyrolysis by microwave-assisted formic acid pretreatment.

    Science.gov (United States)

    Feng, Yu; Li, Guangyu; Li, Xiangyu; Zhu, Ning; Xiao, Bo; Li, Jian; Wang, Yujue

    2016-08-01

    This study investigated microwave-assisted formic acid (MW-FA) pretreatment as a possible way to improve aromatic production from catalytic fast pyrolysis (CFP) of lignocellulosic biomass. Results showed that short duration of MW-FA pretreatment (5-10min) could effectively disrupt the recalcitrant structure of beech wood and selectively remove its hemicellulose and lignin components. This increased the accessibility of cellulose component of biomass to subsequent thermal conversion in CFP. Consequently, the MW-FA pretreated beech wood produced 14.0-28.3% higher yields (26.4-29.8C%) for valuable aromatic products in CFP than the untreated control (23.2C%). In addition, the yields of undesired solid residue (char/coke) decreased from 33.1C% for the untreated control to 28.6-29.8C% for the MW-FA pretreated samples. These results demonstrate that MW-FA pretreatment can provide an effective way to improve the product distribution from CFP of lignocellulose. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. REMINDER: Saved Leave Scheme (SLS)

    CERN Multimedia

    2003-01-01

    Transfer of leave to saved leave accounts Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'* annual and compensatory leave (excluding saved leave accumulated in accordance with the provisions of Administrative Circular No 22B) can be transferred to the saved leave account at the end of the leave year (30 September). We remind you that unused leave of all those taking part in the saved leave scheme at the closure of the leave year accounts is transferred automatically to the saved leave account on that date. Therefore, staff members have no administrative steps to take. In addition, the transfer, which eliminates the risk of omitting to request leave transfers and rules out calculation errors in transfer requests, will be clearly shown in the list of leave transactions that can be consulted in EDH from October 2003 onwards. Furthermore, this automatic leave transfer optimizes staff members' chances of benefiting from a saved leave bonus provided that they ar...

  16. PRE-TREATMENTS EFFECTS ON Hovenia dulcis Thunb. WOOD DRYING RATE

    Directory of Open Access Journals (Sweden)

    Magnos Alan Vivian

    2010-11-01

    Full Text Available This study aimed to evaluate the effect of pre-treatments on drying rate of uva-do-japão wood (Hovenia dulcis Thunb.. For this, samples of wood species concerned with dimensions of 2,0 x 10,0 x 20,0 cm (E x L x C, were subjected to pre-treatment of soaking in hot water and freezing. The pre- treatments of heating and freezing were conducted in a thermal tank at 85ºC and a freezer at -18ºC, respectively, where the samples remained for 12 and 24 hours for both treatments. After the pre-treatments, the wood samples were dried in an electric oven at temperatures of 60 and 90°C until the final moisture content. Thedrying rate was significantly influenced by pre-treatments, drying temperature and their duration of them. This rate presented a different behavior according to the duration of treatment: the warning was higher with 12hours whereas the freezing, with 24 hours, was more evident. The increasing duration and temperature observed showed that the tendency of the drying rate is to increase.

  17. ECLSS Sustaining Compatibility Testing on Urine Processor Assembly Nonmetallic Materials for Reformulation of Pretreated Urine Solution

    Science.gov (United States)

    Wingard, C. D.

    2015-01-01

    On International Space Station (ISS), the Urine Processor Assembly (UPA) converts human urine and flush water into potable water. The urine is acid-pretreated primarily to control microbial growth. In recent years, the sulfuric acid (H2SO4) pretreatment was believed to be largely responsible for producing salt crystals capable of plugging filters in UPA components and significantly reducing the percentage of water recovery from urine. In 2012, ISS management decided to change the acid pretreatment for urine from sulfuric to phosphoric with the goal of eliminating or minimizing formation of salt crystals. In 2013-2014, as part of the qualification of the phosphoric acid (H3PO4) formulation, samples of 12 nonmetallic materials used in UPA components were immersed for up to one year in pretreated urine and brine solutions made with the new H3PO4 formulation. Dynamic mechanical analysis (DMA) was used to measure modulus (stiffness) of the immersed samples compared to virgin control samples. Such compatibility data obtained by DMA for the H3PO4-based solutions were compared to DMA data obtained for the H2SO4-based solutions in 2002-2003.

  18. Possibilities and evaluation of straw pretreatment

    DEFF Research Database (Denmark)

    Knudsen, Niels Ole; Jensen, Peter Arendt; Sander, Bo

    1998-01-01

    Biomass utilisation by cofiring of straw in a pulverised coal fire boiler is economically attractive compared to dedicated straw fired plants. However, the high content of potassium and chloride impedes utilisation of the fly ash, deactivates the de NOx catalysts in the flue gas cleaning system...... and may also lead to increased deposit formation. A pretreatment process is required to solve the problems. In this paper two pretreatment processes are considred, one based on straw wash and another based on pyrolysis and char wash. To evaluate and compare the processes, laboratory and technical...... invetsigations were performed. The economy of both processes are favourable compared with seperate straw fired boilers, however, the removal efficiency of potassium of the pyrolysi based process is relatively low. At the present level of invetsigations the straw wash process looks promising and commercially...

  19. Pretreatment of Latent Prints for Laser Development.

    Science.gov (United States)

    Menzel, E R

    1989-06-01

    The pretreatment procedures for laser detection of latent fingerprints is reviewed. The general features of laser detection and the operational aspects of the examination of physical evidence for laser fingerprint detection are enumerated in the initial sections. The literature review is divided into various pretreatment approaches. Cited studies prior to 1981 are primarily concerned with the demonstration of the viability of laser fingerprint detection, whereas work post-1981 addresses issues of compatibility with the traditional methods of fingerprint development, examination of difficult surfaces, and the routine implementation of laser detection by law enforcement agencies. Related topics of research, review articles, conference reports, case examinations, the research support climate, and future trends are also briefly addressed. Copyright © 1989 Central Police University.

  20. Delivery of a national home safety equipment scheme in England: a survey of local scheme leaders.

    Science.gov (United States)

    Mulvaney, C A; Watson, M C; Hamilton, T; Errington, G

    2013-11-01

    Unintentional home injuries sustained by preschool children are a major cause of morbidity in the UK. Home safety equipment schemes may reduce home injury rates. In 2009, the Royal Society for the Prevention of Accidents was appointed as central coordinator of a two-year, £18m national home safety equipment scheme in England. This paper reports the findings from a national survey of all scheme leaders responsible for local scheme delivery. A questionnaire mailed to all local scheme leaders sought details of how the schemes were operated locally; barriers and facilitators to scheme implementation; evaluation of the local scheme and its sustainability. A response rate of 73% was achieved. Health visitors and family support workers played a key role in both the identification of eligible families and performing home safety checks. The majority of local scheme leaders (94.6%) reported that they thought their local scheme had been successful in including those families considered 'harder to engage'. Many scheme leaders (72.4%) reported that they had evaluated the provision of safety equipment in their scheme and over half (56.6%) stated that they would not be able to continue the scheme once funding ceased. Local schemes need support to effectively evaluate their scheme and to seek sustainability funding to ensure the future of the scheme. There remains a lack of evidence of whether the provision of home safety equipment reduces injuries in preschool children.

  1. Waste Separations and Pretreatment Workshop report

    Energy Technology Data Exchange (ETDEWEB)

    Cruse, J.M. [Westinghouse Hanford Co., Richland, WA (United States); Harrington, R.A. [Kaiser Engineers Hanford Co., Richland, WA (United States); Quadrel, M.J. [Battelle Pacific Northwest Lab., Richland, WA (United States)

    1994-01-01

    This document provides the minutes from the Waste Separations and Pretreatment Workshop sponsored by the Underground Storage Tank-Integrated Demonstration in Salt Lake City, Utah, February 3--5, 1993. The Efficient Separations and Processing-Integrated Program and the Hanford Site Tank Waste Remediation System were joint participants. This document provides the detailed minutes, including responses to questions asked, an attendance list, reproductions of the workshop presentations, and a revised chart showing technology development activities.

  2. Channel Aggregation Schemes for Cognitive Radio Networks

    Science.gov (United States)

    Lee, Jongheon; So, Jaewoo

    This paper proposed three channel aggregation schemes for cognitive radio networks, a constant channel aggregation scheme, a probability distribution-based variable channel aggregation scheme, and a residual channel-based variable channel aggregation scheme. A cognitive radio network can have a wide bandwidth if unused channels in the primary networks are aggregated. Channel aggregation schemes involve either constant channel aggregation or variable channel aggregation. In this paper, a Markov chain is used to develop an analytical model of channel aggregation schemes; and the performance of the model is evaluated in terms of the average sojourn time, the average throughput, the forced termination probability, and the blocking probability. Simulation results show that channel aggregation schemes can reduce the average sojourn time of cognitive users by increasing the channel occupation rate of unused channels in a primary network.

  3. Hybrid scheme for Brownian semistationary processes

    DEFF Research Database (Denmark)

    Bennedsen, Mikkel; Lunde, Asger; Pakkanen, Mikko S.

    is to approximate the kernel function by a power function near zero and by a step function elsewhere. The resulting approximation of the process is a combination of Wiener integrals of the power function and a Riemann sum, which is why we call this method a hybrid scheme. Our main theoretical result describes...... the asymptotics of the mean square error of the hybrid scheme and we observe that the scheme leads to a substantial improvement of accuracy compared to the ordinary forward Riemann-sum scheme, while having the same computational complexity. We exemplify the use of the hybrid scheme by two numerical experiments......We introduce a simulation scheme for Brownian semistationary processes, which is based on discretizing the stochastic integral representation of the process in the time domain. We assume that the kernel function of the process is regularly varying at zero. The novel feature of the scheme...

  4. Sample Proficiency Test exercise

    Energy Technology Data Exchange (ETDEWEB)

    Alcaraz, A; Gregg, H; Koester, C

    2006-02-05

    The current format of the OPCW proficiency tests has multiple sets of 2 samples sent to an analysis laboratory. In each sample set, one is identified as a sample, the other as a blank. This method of conducting proficiency tests differs from how an OPCW designated laboratory would receive authentic samples (a set of three containers, each not identified, consisting of the authentic sample, a control sample, and a blank sample). This exercise was designed to test the reporting if the proficiency tests were to be conducted. As such, this is not an official OPCW proficiency test, and the attached report is one method by which LLNL might report their analyses under a more realistic testing scheme. Therefore, the title on the report ''Report of the Umpteenth Official OPCW Proficiency Test'' is meaningless, and provides a bit of whimsy for the analyses and readers of the report.

  5. Bioprocess monitoring: minimizing sample matrix effects for total protein quantification with bicinchoninic acid assay.

    Science.gov (United States)

    Reichelt, Wieland N; Waldschitz, Daniel; Herwig, Christoph; Neutsch, Lukas

    2016-09-01

    Determining total protein content is a routine operation in many laboratories. Despite substantial work on assay optimization interferences, the widely used bicinchoninic acid (BCA) assay remains widely recognized for its robustness. Especially in the field of bioprocess engineering the inaccuracy caused by interfering substances remains hardly predictable and not well understood. Since the introduction of the assay, sample pre-treatment by trichloroacetic acid (TCA) precipitation has been indicated as necessary and sufficient to minimize interferences. However, the sample matrix in cultivation media is not only highly complex but also dynamically changing over process time in terms of qualitative and quantitative composition. A significant misestimation of the total protein concentration of bioprocess samples is often observed when following standard work-up schemes such as TCA precipitation, indicating that this step alone is not an adequate means to avoid measurement bias. Here, we propose a modification of the BCA assay, which is less influenced by sample complexity. The dynamically changing sample matrix composition of bioprocessing samples impairs the conventional approach of compensating for interfering substances via a static offset. Hence, we evaluated the use of a correction factor based on an internal spike measurement for the respective samples. Using protein spikes, the accuracy of the BCA protein quantification could be improved fivefold, taking the BCA protein quantification to a level of accuracy comparable to other, more expensive methods. This will allow reducing expensive iterations in bioprocess development to due inaccurate total protein analytics.

  6. Hydrothermal pretreatment of palm oil empty fruit bunch

    Science.gov (United States)

    Simanungkalit, Sabar Pangihutan; Mansur, Dieni; Nurhakim, Boby; Agustin, Astrid; Rinaldi, Nino; Muryanto, Fitriady, Muhammad Ariffudin

    2017-01-01

    Hydrothermal pretreatment methods in 2nd generation bioethanol production more profitable to be developed, since the conventional pretreatment, by using acids or alkalis, is associated with the serious economic and environmental constraints. The current studies investigate hydrothermal pretreatment of palm oil empty fruit bunch (EFB) in a batch tube reactor system with temperature and time range from 160 to 240 C and 15 to 30 min, respectively. The EFB were grinded and separated into 3 different particles sizes i.e. 10 mesh, 18 mesh and 40 mesh, prior to hydrothermal pretreatment. Solid yield and pH of the treated EFB slurries changed over treatment severities. The chemical composition of EFB was greatly affected by the hydrothermal pretreatment especially hemicellulose which decreased at higher severity factor as determined by HPLC. Both partial removal of hemicellulose and migration of lignin during hydrothermal pretreatment caused negatively affect for enzymatic hydrolysis. This studies provided important factors for maximizing hydrothermal pretreatment of EFB.

  7. Effects of Pre-Treatment and Temperature on the Quality and Drying Rate of Tomatoes

    Directory of Open Access Journals (Sweden)

    R.A Iyanda

    2014-07-01

    Full Text Available The effect of pre-treatment and temperature on the quality and the drying rate of tomatos (Lycopersicon esculentus were studied. A 3× 5 factorial experiment in a randomized complete block (RCBD design was used. Firm and fresh ripe tomatoes were washed and sliced to a uniform thickness of 5mm, pre-treatment by boiling for 3 minutes was given to some of the sliced tomatoes while some were blanched by soaking in water at 90 0C for 3 minutes and the remaining part was dried raw. 200g each of the sample was dried at temperatures of 50, 55, 60, 65, and 70 0C in a cabinet drier until no moisture removal was observed. The moisture removal from the samples in the cabinet was observed and measured on an hourly basis and the vitamin C content of the dried samples was also analyzed. The results obtained for the drying rate and Vitamin C content were statistically analyzed using SPSS software to generate the ANOVA and DNMRT. It was found that samples dried at higher temperatures had higher drying rates irrespective of the pre-treatment. Raw samples and Samples dried at lower temperatures had better quality in terms of vitamin C retention.

  8. Pretreatment of the macroalgae Chaetomorpha linum for the production of bioethanol–Comparison of five pretreatment technologies

    DEFF Research Database (Denmark)

    Thomsen, Sune Tjalfe

    2013-01-01

    A qualified estimate for pretreatment of the macroalgae Chaetomorpha linum for ethanol production was given, based on the experience of pretreatment of land-based biomass. C. linum was subjected to hydrothermal pretreatment (HTT), wet oxidation (WO), steam explosion (STEX), plasma...... yield of 57. g ethanol/100. g glucan. A 64% higher ethanol yield, based on raw material, was reached after pretreatment with WO and BM compared with unpretreated C. linum, however 50% of the biomass was lost during WO. Results indicated that the right combination of pretreatment and marine macroalgae...

  9. Scheme of thinking quantum systems

    Science.gov (United States)

    Yukalov, V. I.; Sornette, D.

    2009-11-01

    A general approach describing quantum decision procedures is developed. The approach can be applied to quantum information processing, quantum computing, creation of artificial quantum intelligence, as well as to analyzing decision processes of human decision makers. Our basic point is to consider an active quantum system possessing its own strategic state. Processing information by such a system is analogous to the cognitive processes associated to decision making by humans. The algebra of probability operators, associated with the possible options available to the decision maker, plays the role of the algebra of observables in quantum theory of measurements. A scheme is advanced for a practical realization of decision procedures by thinking quantum systems. Such thinking quantum systems can be realized by using spin lattices, systems of magnetic molecules, cold atoms trapped in optical lattices, ensembles of quantum dots, or multilevel atomic systems interacting with electromagnetic field.

  10. Fragment separator momentum compression schemes

    Energy Technology Data Exchange (ETDEWEB)

    Bandura, Laura, E-mail: bandura@anl.gov [Facility for Rare Isotope Beams (FRIB), 1 Cyclotron, East Lansing, MI 48824-1321 (United States); National Superconducting Cyclotron Lab, Michigan State University, 1 Cyclotron, East Lansing, MI 48824-1321 (United States); Erdelyi, Bela [Argonne National Laboratory, Argonne, IL 60439 (United States); Northern Illinois University, DeKalb, IL 60115 (United States); Hausmann, Marc [Facility for Rare Isotope Beams (FRIB), 1 Cyclotron, East Lansing, MI 48824-1321 (United States); Kubo, Toshiyuki [RIKEN Nishina Center, RIKEN, Wako (Japan); Nolen, Jerry [Argonne National Laboratory, Argonne, IL 60439 (United States); Portillo, Mauricio [Facility for Rare Isotope Beams (FRIB), 1 Cyclotron, East Lansing, MI 48824-1321 (United States); Sherrill, Bradley M. [National Superconducting Cyclotron Lab, Michigan State University, 1 Cyclotron, East Lansing, MI 48824-1321 (United States)

    2011-07-21

    We present a scheme to use a fragment separator and profiled energy degraders to transfer longitudinal phase space into transverse phase space while maintaining achromatic beam transport. The first order beam optics theory of the method is presented and the consequent enlargement of the transverse phase space is discussed. An interesting consequence of the technique is that the first order mass resolving power of the system is determined by the first dispersive section up to the energy degrader, independent of whether or not momentum compression is used. The fragment separator at the Facility for Rare Isotope Beams is a specific application of this technique and is described along with simulations by the code COSY INFINITY.

  11. Fragment separator momentum compression schemes.

    Energy Technology Data Exchange (ETDEWEB)

    Bandura, L.; Erdelyi, B.; Hausmann, M.; Kubo, T.; Nolen, J.; Portillo, M.; Sherrill, B.M. (Physics); (MSU); (Northern Illinois Univ.); (RIKEN)

    2011-07-21

    We present a scheme to use a fragment separator and profiled energy degraders to transfer longitudinal phase space into transverse phase space while maintaining achromatic beam transport. The first order beam optics theory of the method is presented and the consequent enlargement of the transverse phase space is discussed. An interesting consequence of the technique is that the first order mass resolving power of the system is determined by the first dispersive section up to the energy degrader, independent of whether or not momentum compression is used. The fragment separator at the Facility for Rare Isotope Beams is a specific application of this technique and is described along with simulations by the code COSY INFINITY.

  12. Fragment separator momentum compression schemes

    Science.gov (United States)

    Bandura, Laura; Erdelyi, Bela; Hausmann, Marc; Kubo, Toshiyuki; Nolen, Jerry; Portillo, Mauricio; Sherrill, Bradley M.

    2011-07-01

    We present a scheme to use a fragment separator and profiled energy degraders to transfer longitudinal phase space into transverse phase space while maintaining achromatic beam transport. The first order beam optics theory of the method is presented and the consequent enlargement of the transverse phase space is discussed. An interesting consequence of the technique is that the first order mass resolving power of the system is determined by the first dispersive section up to the energy degrader, independent of whether or not momentum compression is used. The fragment separator at the Facility for Rare Isotope Beams is a specific application of this technique and is described along with simulations by the code COSY INFINITY.

  13. Electrical injection schemes for nanolasers

    DEFF Research Database (Denmark)

    Lupi, Alexandra; Chung, Il-Sug; Yvind, Kresten

    2013-01-01

    threshold current has been achieved with the lateral electrical injection through the BH; while the lowest resistance has been obtained from the current post structure even though this model shows a higher current threshold because of the lack of carrier confinement. Final scope of the simulations......The performance of injection schemes among recently demonstrated electrically pumped photonic crystal nanolasers has been investigated numerically. The computation has been carried out at room temperature using a commercial semiconductor simulation software. For the simulations two electrical...... of 3 InGaAsP QWs on an InP substrate has been chosen for the modeling. In the simulations the main focus is on the electrical and optical properties of the nanolasers i.e. electrical resistance, threshold voltage, threshold current and wallplug efficiency. In the current flow evaluation the lowest...

  14. Staggered Schemes for Fluctuating Hydrodynamics

    CERN Document Server

    Balboa, F; Delgado-Buscalioni, R; Donev, A; Fai, T; Griffith, B; Peskin, C S

    2011-01-01

    We develop numerical schemes for solving the isothermal compressible and incompressible equations of fluctuating hydrodynamics on a grid with staggered momenta. We develop a second-order accurate spatial discretization of the diffusive, advective and stochastic fluxes that satisfies a discrete fluctuation-dissipation balance, and construct temporal discretizations that are at least second-order accurate in time deterministically and in a weak sense. Specifically, the methods reproduce the correct equilibrium covariances of the fluctuating fields to third (compressible) and second (incompressible) order in the time step, as we verify numerically. We apply our techniques to model recent experimental measurements of giant fluctuations in diffusively mixing fluids in a micro-gravity environment [A. Vailati et. al., Nature Communications 2:290, 2011]. Numerical results for the static spectrum of non-equilibrium concentration fluctuations are in excellent agreement between the compressible and incompressible simula...

  15. Predicting breast cancer response to neoadjuvant chemotherapy using pretreatment diffuse optical spectroscopic texture analysis.

    Science.gov (United States)

    Tran, William T; Gangeh, Mehrdad J; Sannachi, Lakshmanan; Chin, Lee; Watkins, Elyse; Bruni, Silvio G; Rastegar, Rashin Fallah; Curpen, Belinda; Trudeau, Maureen; Gandhi, Sonal; Yaffe, Martin; Slodkowska, Elzbieta; Childs, Charmaine; Sadeghi-Naini, Ali; Czarnota, Gregory J

    2017-05-09

    Diffuse optical spectroscopy (DOS) has been demonstrated capable of monitoring response to neoadjuvant chemotherapy (NAC) in locally advanced breast cancer (LABC) patients. In this study, we evaluate texture features of pretreatment DOS functional maps for predicting LABC response to NAC. Locally advanced breast cancer patients (n=37) underwent DOS breast imaging before starting NAC. Breast tissue parametric maps were constructed and texture analyses were performed based on grey-level co-occurrence matrices for feature extraction. Ground truth labels as responders (R) or non-responders (NR) were assigned to patients based on Miller-Payne pathological response criteria. The capability of DOS textural features computed on volumetric tumour data before the start of treatment (i.e., 'pretreatment') to predict patient responses to NAC was evaluated using a leave-one-out validation scheme at subject level. Data were analysed using a logistic regression, naive Bayes, and k-nearest neighbour classifiers. Data indicated that textural characteristics of pretreatment DOS parametric maps can differentiate between treatment response outcomes. The HbO2 homogeneity resulted in the highest accuracy among univariate parameters in predicting response to chemotherapy: sensitivity (%Sn) and specificity (%Sp) were 86.5% and 89.0%, respectively, and accuracy was 87.8%. The highest predictors using multivariate (binary) combination features were the Hb-contrast+HbO2-homogeneity, which resulted in a %Sn/%Sp=78.0/81.0% and an accuracy of 79.5%. This study demonstrated that the pretreatment DOS texture features can predict breast cancer response to NAC and potentially guide treatments.

  16. Microfabricated Devices for Sample Extraction, Concentrations, and Related Sample Processing Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Gang; Lin, Yuehe

    2006-12-01

    This is an invited book chapter. As with other analytical techniques, sample pretreatments, sample extraction, sample introduction, and related techniques are of extreme importance for micro-electro-mechanical systems (MEMS). Bio-MEMS devices and systems start with a sampling step. The biological sample then usually undergoes some kinds of sample preparation steps before the actual analysis. These steps may involve extracting the target sample from its matrix, removing interferences from the sample, derivatizing the sample to detectable species, or performing a sample preconcentration step. The integration of the components for sample pretreatment into microfluidic devices represents one of the remaining the bottle-neck towards achieving true miniaturized total analysis systems (?TAS). This chapter provides a thorough state-of-art of the developments in this field to date.

  17. Pre-treatment anxiety in a dental hygiene recall population: a cross-sectional pilot study.

    Science.gov (United States)

    Hofer, Deborah; Thoma, Myriam V; Schmidlin, Patrick R; Attin, Thomas; Ehlert, Ulrike; Nater, Urs M

    2016-03-24

    Increased levels of anxiety may affect a patient's receptiveness to treatment, health care information and behaviour modification. This study was undertaken to assess pre-treatment anxiety in a dental hygiene recall population maintaining a schedule of regular preventive care appointments. The sample population consisted of 46 consecutive adult recall patients waiting for their regularly scheduled dental hygiene appointment. Pre-treatment state (current) anxiety was assessed using the State-Trait-Anxiety Inventory (STAI), State form; dental anxiety with the Hierarchical Anxiety Questionnaire (HAQ); subjective stress using a visual analogue scale (VAS); and mood/alertness/calmness using the Multidimensional Mood Questionnaire (MDMQ). Two distinct groups, based on state anxiety scores, were formed; one displaying increased levels of pre-treatment anxiety (n = 14), the other low anxiety (n = 32). The HA group was characterized by significantly higher dental anxiety and subjective stress levels prior to treatment; as well as worse mood, lower alertness, and less calmness in the dental office setting. There was no correlation between anxiety level and years in dental hygiene recall. A high level of pre-treatment anxiety was present in about one third of the sample population. The prevalence of this anxiety demonstrates the need for both early recognition and patient management strategies (psychological and pain management) to positively influence their treatment experience.

  18. Hot water and dilute acid pretreatment of high and low specific gravity Populus deltoides clones.

    Science.gov (United States)

    Martin, Elizabeth M; Bunnell, Kris A; Lau, Ching-Shuan; Pelkki, Matthew H; Patterson, David W; Clausen, Edgar C; Smith, James A; Carrier, Danielle Julie

    2011-02-01

    Populus sp. are hardwood feedstocks that grow in forest management areas that are logged for softwoods; however, they are also being considered as an energy-destined feedstock. The objective of this work was to determine the effect of xylose yield from dilute acid and hot water pretreatments performed in unstirred batch stainless steel reactors at temperatures ranging from 140 to 200°C. Populus deltoides clones S13C20 and S7C15 used in this study originated from Eastern Texas and were cultivated for 14 years in Pine Tree, AR. P. deltoides clones S13C20 and S7C15 had specific gravities of 0.48 and 0.40, respectively. Bark and wood were examined separately. As expected, hot water pretreatments, in the tested temperature range, resulted in very little direct xylose recovery. However, the 140°C dilute acid pretreatment of the lower specific gravity clone, S7C15, wood yielded the highest average xylose recovery of 56%. This condition also yielded the highest concentration of furfural, 9 mg/g sample, which can be inhibitory to the fermentation step. The highest xylose recovery from bark samples, 31%, was obtained with clone S7C15, using the 160°C dilute acid pretreatment for 60 min.

  19. Evaluation energy efficiency of bioconversion knot rejects to ethanol in comparison to other thermochemically pretreated biomass.

    Science.gov (United States)

    Wang, Zhaojiang; Qin, Menghua; Zhu, J Y; Tian, Guoyu; Li, Zongquan

    2013-02-01

    Rejects from sulfite pulp mill that otherwise would be disposed of by incineration were converted to ethanol by a combined physical-biological process that was comprised of physical refining and simultaneous saccharification and fermentation (SSF). The energy efficiency was evaluated with comparison to thermochemically pretreated biomass, such as those pretreated by dilute acid (DA) and sulfite pretreatment to overcome recalcitrance of lignocelluloses (SPORL). It was observed that the structure deconstruction of rejects by physical refining was indispensable to effective bioconversion but more energy intensive than that of thermochemically pretreated biomass. Fortunately, the energy consumption was compensated by the reduced enzyme dosage and the elevated ethanol yield. Furthermore, adjustment of disk-plates gap led to reduction in energy consumption with negligible influence on ethanol yield. In this context, energy efficiency up to 717.7% was achieved for rejects, much higher than that of SPORL sample (283.7%) and DA sample (152.8%). Copyright © 2012 Elsevier Ltd. All rights reserved.

  20. Efficient biomass pretreatment using ionic liquids derived from lignin and hemicellulose.

    Science.gov (United States)

    Socha, Aaron M; Parthasarathi, Ramakrishnan; Shi, Jian; Pattathil, Sivakumar; Whyte, Dorian; Bergeron, Maxime; George, Anthe; Tran, Kim; Stavila, Vitalie; Venkatachalam, Sivasankari; Hahn, Michael G; Simmons, Blake A; Singh, Seema

    2014-09-02

    Ionic liquids (ILs), solvents composed entirely of paired ions, have been used in a variety of process chemistry and renewable energy applications. Imidazolium-based ILs effectively dissolve biomass and represent a remarkable platform for biomass pretreatment. Although efficient, imidazolium cations are expensive and thus limited in their large-scale industrial deployment. To replace imidazolium-based ILs with those derived from renewable sources, we synthesized a series of tertiary amine-based ILs from aromatic aldehydes derived from lignin and hemicellulose, the major by-products of lignocellulosic biofuel production. Compositional analysis of switchgrass pretreated with ILs derived from vanillin, p-anisaldehyde, and furfural confirmed their efficacy. Enzymatic hydrolysis of pretreated switchgrass allowed for direct comparison of sugar yields and lignin removal between biomass-derived ILs and 1-ethyl-3-methylimidazolium acetate. Although the rate of cellulose hydrolysis for switchgrass pretreated with biomass-derived ILs was slightly slower than that of 1-ethyl-3-methylimidazolium acetate, 90-95% glucose and 70-75% xylose yields were obtained for these samples after 72-h incubation. Molecular modeling was used to compare IL solvent parameters with experimentally obtained compositional analysis data. Effective pretreatment of lignocellulose was further investigated by powder X-ray diffraction and glycome profiling of switchgrass cell walls. These studies showed different cellulose structural changes and differences in hemicellulose epitopes between switchgrass pretreatments with the aforementioned ILs. Our concept of deriving ILs from lignocellulosic biomass shows significant potential for the realization of a "closed-loop" process for future lignocellulosic biorefineries and has far-reaching economic impacts for other IL-based process technology currently using ILs synthesized from petroleum sources.

  1. Mild coal pretreatment to improve liquefaction reactivity. Final technical report, September 1990--February 1994

    Energy Technology Data Exchange (ETDEWEB)

    Miller, R.L.; Shams, K.G.

    1994-07-01

    Recent research efforts in direct coal liquefaction are focused on lowering the level of reaction severity, identification and determination of the causes of retrogressive reactions, and improving the economics of the process. Ambient pretreatment of coals using methanol and a trace amount of hydrochloric acid was extensively studied in connection with low severity coal liquefaction. Ambient pretreatment of eight Argonne coals using methanol/HCl improved THF-soluble conversions 24.5 wt % (maf basis) for Wyodak subbituminous coal and 28.4 wt % for Beulah-Zap lignite with an average increase of 14.9 wt % for the eight Argonne coals at 623 K (350{degrees}C) reaction temperature and 30 minutes reaction time. Optimal pretreatment conditions were determined using Wyodak and Illinois No. 6 coals. Acid concentration was the most important pretreatment variable studied; liquefaction reactivity increased with increasing acid concentration up to 2 vol %. The FTIR spectra of treated and untreated Wyodak coal samples demonstrated formation of carboxylic functional groups during pretreatment, a result of divalent (Ca, Mg) cationic bridge destruction. The extent of liquefaction reactivity directly correlated with the amount of calcium removed during pretreatment, and results from calcium ``addback`` experiments supported the observation that calcium adversely affected coal reactivity at low severity reaction conditions. Model compound studies using benzyl phenyl ether demonstrated that calcium cations catalyzed retrogressive reactions, inhibited hydrogenation reactions at low severity reaction conditions, and were more active at higher reaction temperatures. Based on kinetic data, mechanisms for hydrogenation-based inhibition and base-catalyzed retrogressive reactions are proposed. The base-catalyzed retrogressive reactions are shown to occur via a hydrogen abstraction mechanism where hydrogenation inhibition reactions are shown to take place via a surface quenching mechanism.

  2. Open sun drying of green bean: influence of pretreatments on drying kinetics, colour and rehydration capacity

    Science.gov (United States)

    İsmail, Osman; Kantürk Figen, Aysel; Pişkin, Sabriye

    2017-04-01

    Green bean ( Phaseolus Vulgaris L), classified under legume family, is a primary source of dietary protein in human diets especially in the agricultural countries. Green bean is susceptible to rapid deterioration because of their high moisture content and in order to prevent and present the green bean drying process is applied. In this study, effects of pretreatments on drying kinetics, colour and rehydration capacity of green bean were investigated. It was observed that the pretreatment affected the drying time. The shortest drying times were obtained from pretreated samples with blanched. Drying times were determined as 47, 41 and 29 h for natural, salted and blanch, respectively. The results showed that pretreatment and ambient temperature significantly ( P = 0.05) affected the drying rate and the drying time. The effective moisture diffusivity was determined by using Fick's second law and was found to be range between 3.15 × 10-10 and 1.2 × 10-10 m2/s for the pre-treated and natural green bean samples. The rehydration values were obtained 2.75, 2.71, 2.29 (g water/g dry matter) for the blanched, salted and natural samples. The effective diffusion coefficients were calculated using the data collected during the falling rate period and the experimental data are fitted to seven thin layer drying models which found in the literature. The Logarithmic model was found to best describe the drying behavior of fresh green beans under open air sun. Rehydration time and color parameters had been determined in order to improve the quality of dried green bean. Regarding with rehydration time and colour data, the best results were obtained at blanched drying conditions.

  3. On Optimal Designs of Some Censoring Schemes

    Directory of Open Access Journals (Sweden)

    Dr. Adnan Mohammad Awad

    2016-03-01

    Full Text Available The main objective of this paper  is to explore suitability of some entropy-information measures for introducing a new optimality censoring criterion and to apply it to some censoring schemes from some underlying life-time models.  In addition, the  paper investigates four related issues namely; the  effect of the parameter of parent distribution on optimal scheme, equivalence of schemes based on Shannon and Awad sup-entropy measures, the conjecture that the optimal scheme is one stage scheme, and  a conjecture by Cramer and Bagh (2011 about Shannon minimum and maximum schemes when parent distribution is reflected power. Guidelines for designing an optimal censoring plane are reported together with theoretical and numerical results and illustrations.

  4. Improved Load Shedding Scheme considering Distributed Generation

    DEFF Research Database (Denmark)

    Das, Kaushik; Nitsas, Antonios; Altin, Müfit

    2017-01-01

    With high penetration of distributed generation (DG), the conventional under-frequency load shedding (UFLS) face many challenges and may not perform as expected. This article proposes new UFLS schemes, which are designed to overcome the shortcomings of traditional load shedding scheme. These sche......With high penetration of distributed generation (DG), the conventional under-frequency load shedding (UFLS) face many challenges and may not perform as expected. This article proposes new UFLS schemes, which are designed to overcome the shortcomings of traditional load shedding scheme....... These schemes utilize directional relays, power flow through feeders, wind and PV measurements to optimally select the feeders to be disconnected during load shedding such that DG disconnection is minimized while disconnecting required amount of consumption. These different UFLS schemes are compared in terms...

  5. Physiochemical Characterization of Lignocellulosic Biomass Dissolution by Flowthrough Pretreatment

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Lishi; Pu, Yunqiao; Bowden, Mark; Ragauskas, Arthur J.; Yang, Bin

    2016-01-04

    Comprehensive understanding of biomass solubilization chemistry in aqueous pretreatment such as water-only and dilute acid flowthrough pretreatment is of fundamental importance to achieve the goal of valorizing biomass to fermentable sugars and lignin for biofuels production. In this study, poplar wood was flowthrough pretreated by water-only or 0.05% (w/w) sulfuric acid at different temperatures (220-270 °C), flow rate (25 mL/min), and reaction times (8-90 min), resulting in significant disruption of the lignocellulosic biomass. Ion chromatography (IC), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) analysis, and solid state cross-polarization/magic angle spinning (CP/MAS) 13C nuclear magnetic resonance (NMR) spectroscopy were applied to characterize the pretreated biomass whole slurries in order to reveal depolymerization as well as solubilization mechanism and identify unique dissolution structural features during these pretreatments. Results showed temperature-dependent cellulose decrystallization in flowthrough pretreatment. Crystalline cellulose was completely disrupted, and mostly converted to amorphous cellulose and oligomers by water-only operation at 270 °C for 10 min and by 0.05 wt % H2SO4 flowthrough pretreatment at 220 °C for 12 min. Flowthrough pretreatment with 0.05% (w/w) H2SO4 led to a greater disruption of structures in pretreated poplar at a lower temperature compared to water-only pretreatment.

  6. Investigating the influence of ultrasound pre-treatment on drying kinetics and moisture migration measurement in Lactobacillus sakei cultured and uncultured beef jerky

    OpenAIRE

    Ojha, K. Shikha; Kerry, Joseph P.; Tiwari, Brijesh K.

    2017-01-01

    Low Frequency-Nuclear Magnetic Resonance (LF-NMR) was employed to elucidate changes in water distribution in cultured (Lactobacillus sakei) and uncultured beef jerky samples subjected to ultrasound pre-treatment. Ultrasound pre-treatment at frequencies of 25, 33 and 45 kHz for 30 min, followed by marination (18 h) was carried out for both cultured and uncultured jerky samples. Among the various kinetic models assessed, the Wang and Singh model provided the closest fit to the drying experiment...

  7. New Trends in Flow Injection Analysis: Exploitation of Sequential and Lab-on-Valve Schemes

    DEFF Research Database (Denmark)

    Hansen, Elo Harald

    which are difficult or, in fact, otherwise impossible to do, thereby opening new and novel avenues for analytical methods relying on concepts such as kinetic discriminations schemes, exploitation of metastable constituents of attractive analytical characteristics, or utilisation of detection by bio...... sensitivity and selectivity. Either in order to separate/preconcentrate the analyte material, or because of the presence of potentially interfering matrix constituents. Such pretreatments are advantageously performed in FIA/SIA/LOV manifolds, where all appropriate unit operations can be effected under...

  8. Tank waste remediation system optimized processing strategy with an altered treatment scheme

    Energy Technology Data Exchange (ETDEWEB)

    Slaathaug, E.J.

    1996-03-01

    This report provides an alternative strategy evolved from the current Hanford Site Tank Waste Remediation System (TWRS) programmatic baseline for accomplishing the treatment and disposal of the Hanford Site tank wastes. This optimized processing strategy with an altered treatment scheme performs the major elements of the TWRS Program, but modifies the deployment of selected treatment technologies to reduce the program cost. The present program for development of waste retrieval, pretreatment, and vitrification technologies continues, but the optimized processing strategy reuses a single facility to accomplish the separations/low-activity waste (LAW) vitrification and the high-level waste (HLW) vitrification processes sequentially, thereby eliminating the need for a separate HLW vitrification facility.

  9. Effect of prosthodontic planning on lateral occlusion scheme: a comparison between conventional and digital planning.

    Science.gov (United States)

    Abduo, Jaafar; Bennamoun, Mohammed; Tennant, Marc; McGeachie, John

    2015-01-01

    Recently, digital wax-up is proposed as a tool to aid prosthodontic planning. However, there are no data about the effect of prosthodontic planning on lateral occlusion scheme. This study aims to evaluate the impact of conventional and digital prosthodontic planning on lateral occlusion scheme. Dental models of 10 patients were collected. All models had Angle Class I occlusion and were undergoing prosthodontic treatment that would influence the lateral occlusion scheme. Each set of models had received both conventional wax-up and digital wax-up. In relation to the lateral occlusion scheme, the following variables were evaluated: the prevalence of the different lateral occlusion scheme, number of contacting teeth and percentage of each contacting tooth. Four excursive positions on the working side were included: 0.5, 1.0, 2.0 and 3.0 mm from the maximal intercuspation position. The lateral occlusion scheme of the two wax-up models was subjected to alterations following excursion. There was a tendency for the prevalence of canine-guided occlusion to increase and for the prevalence of group function occlusion to decrease with increasing excursion. The number of contacting teeth was decreasing with the increasing magnitude of excursion. For the 0.5 mm and 1.0 mm positions, the two wax-ups had significantly greater contacts than the pre-treatment models, while at the 2.0 mm and 3.0 mm positions, all the models were similar. For all models, canines were the most commonly contacting teeth, followed by the teeth adjacent to them. No difference was observed between the two wax-ups in relation to the number of contacting teeth. Although the prosthodontic planning had influenced the pattern of the lateral occlusion scheme and contacts, there was no difference between the conventional and digital prosthodontic planning.

  10. Resonance ionization scheme development for europium

    CERN Document Server

    Chrysalidis, K; Fedosseev, V N; Marsh, B A; Naubereit, P; Rothe, S; Seiffert, C; Kron, T; Wendt, K

    2017-01-01

    Odd-parity autoionizing states of europium have been investigated by resonance ionization spectroscopy via two-step, two-resonance excitations. The aim of this work was to establish ionization schemes specifically suited for europium ion beam production using the ISOLDE Resonance Ionization Laser Ion Source (RILIS). 13 new RILIS-compatible ionization schemes are proposed. The scheme development was the first application of the Photo Ionization Spectroscopy Apparatus (PISA) which has recently been integrated into the RILIS setup.

  11. Resonance ionization scheme development for europium

    Energy Technology Data Exchange (ETDEWEB)

    Chrysalidis, K., E-mail: katerina.chrysalidis@cern.ch; Goodacre, T. Day; Fedosseev, V. N.; Marsh, B. A. [CERN (Switzerland); Naubereit, P. [Johannes Gutenberg-Universität, Institiut für Physik (Germany); Rothe, S.; Seiffert, C. [CERN (Switzerland); Kron, T.; Wendt, K. [Johannes Gutenberg-Universität, Institiut für Physik (Germany)

    2017-11-15

    Odd-parity autoionizing states of europium have been investigated by resonance ionization spectroscopy via two-step, two-resonance excitations. The aim of this work was to establish ionization schemes specifically suited for europium ion beam production using the ISOLDE Resonance Ionization Laser Ion Source (RILIS). 13 new RILIS-compatible ionization schemes are proposed. The scheme development was the first application of the Photo Ionization Spectroscopy Apparatus (PISA) which has recently been integrated into the RILIS setup.

  12. SIGNCRYPTION BASED ON DIFFERENT DIGITAL SIGNATURE SCHEMES

    OpenAIRE

    Adrian Atanasiu; Laura Savu

    2012-01-01

    This article presents two new signcryption schemes. The first one is based on Schnorr digital signature algorithm and the second one is using Proxy Signature scheme introduced by Mambo. Schnorr Signcryption has been implemented in a program and here are provided the steps of the algorithm, the results and some examples. The Mambo’s Proxy Signature is adapted for Shortened Digital Signature Standard, being part of a new Proxy Signcryption scheme.

  13. Optics design for CEPC double ring scheme

    Science.gov (United States)

    Wang, Yiwei; Su, Feng; Bai, Sha; Yu, Chenghui; Gao, Jie

    2017-12-01

    The CEPC is a future Circular Electron and Positron Collider proposed by China to mainly study the Higgs boson. Its baseline design is a double ring scheme and an alternative design is a partial double ring scheme. This paper will present the optics design for the main ring of the double ring scheme. The CEPC will also work as a W and Z factory. Compatible optics designs for a W and a Z modes will be presented as well.

  14. Wavelet Denoising within the Lifting Scheme Framework

    Directory of Open Access Journals (Sweden)

    M. P. Paskaš

    2012-11-01

    Full Text Available In this paper, we consider an example of the lifting scheme and present the results of the simple lifting scheme implementation using lazy transform. The paper is tutorial-oriented. The results are obtained by testing several common test signals for the signal denoising problem and using different threshold values. The lifting scheme represents an effective and flexible tool that can be used for introducing signal dependence into the problem by improving the wavelet properties.

  15. Energy consumption modeling during dairy sewage pretreatment

    Science.gov (United States)

    Dąbrowski, Wojciech; Żyłka, Radosław; Malinowski, Paweł; Boruszko, Dariusz

    2017-11-01

    The research was conducted in a dairy WWTP located in north-eastern Poland with the average flow of 546 m3d-1 and PE 11500 in 2016. Energy consumption was measured with the help of Lumel 3-phase network parameter transducers installed within the plant. The modeling was conducted based on the quantity and quality of raw sewage, after its screening, averaging and dissolved air flotation. The following parameters were determined: BOD5, COD. N-total and P-total. During the research period. 15 measurement series were carried out. Pollution loads removed in primary treatment varied from 167.0 to 803.5 kgO2d-1 and 1205.9 to 10032 kgO2d-1 for BOD5 and COD respectively. The energy consumption share during dairy pretreatment in relation to the total energy consumption was in the range from 13.8 to 28.5% with the mean value of 18.7% during the research period. Energy consumption indicators relating to removed pollution loads for primary treatment were established with the mean values of 0.74 and 0.83 kWhkg-1d-1 for BOD5 and COD respectively. An attempt was made to determine the influence of raw sewage characteristics and pretreatment efficiency on energy consumption of the object. A model of energy consumption during pretreatment was estimated according to the experimental data obtained in the research period. It was modeled using the linear regression model and principal component analysis.

  16. Rheological evaluation of pretreated cladding removal waste

    Energy Technology Data Exchange (ETDEWEB)

    McCarthy, D.; Chan, M.K.C.; Lokken, R.O.

    1986-01-01

    Cladding removal waste (CRW) contains concentrations of transuranic (TRU) elements in the 80 to 350 nCi/g range. This waste will require pretreatment before it can be disposed of as glass or grout at Hanford. The CRW will be pretreated with a rare earth strike and solids removal by centrifugation to segregate the TRU fraction from the non-TRU fraction of the waste. The centrifuge centrate will be neutralized with sodium hydroxide. This neutralized cladding removal waste (NCRW) is expected to be suitable for grouting. The TRU solids removed by centrifugation will be vitrified. The goal of the Rheological Evaluation of Pretreated Cladding Removal Waste Program was to evaluate those rheological and transport properties critical to assuring successful handling of the NCRW and TRU solids streams and to demonstrate transfers in a semi-prototypic pumping environment. This goal was achieved by a combination of laboratory and pilot-scale evaluations. The results obtained during these evaluations were correlated with classical rheological models and scaled-up to predict the performance that is likely to occur in the full-scale system. The Program used simulated NCRW and TRU solid slurries. Rockwell Hanford Operations (Rockwell) provided 150 gallons of simulated CRW and 5 gallons of simulated TRU solid slurry. The simulated CRW was neutralized by Pacific Northwest Laboratory (PNL). The physical and rheological properties of the NCRW and TRU solid slurries were evaluated in the laboratory. The properties displayed by NCRW allowed it to be classified as a pseudoplastic or yield-pseudoplastic non-Newtonian fluid. The TRU solids slurry contained very few solids. This slurry exhibited the properties associated with a pseudoplastic non-Newtonian fluid.

  17. Mixed ultrasoft/norm-conserved pseudopotential scheme

    DEFF Research Database (Denmark)

    Stokbro, Kurt

    1996-01-01

    A variant of the Vanderbilt ultrasoft pseudopotential scheme, where the norm conservation is released for only one or a few angular channels, is presented. Within this scheme some difficulties of the truly ultrasoft pseudopotentials are overcome without sacrificing the pseudopotential softness. (i......) Ghost states are easily avoided without including semicore shells. (ii) The ultrasoft pseudo-charge-augmentation functions can be made softer. (iii) The number of nonlocal operators is reduced. The scheme will be most useful for transition metals, and the feasibility and accuracy of the scheme...

  18. Central schemes for open-channel flow

    Science.gov (United States)

    Gottardi, Guido; Venutelli, Maurizio

    2003-03-01

    The resolution of the Saint-Venant equations for modelling shock phenomena in open-channel flow by using the second-order central schemes of Nessyahu and Tadmor (NT) and Kurganov and Tadmor (KT) is presented. The performances of the two schemes that we have extended to the non-homogeneous case and that of the classical first-order Lax-Friedrichs (LF) scheme in predicting dam-break and hydraulic jumps in rectangular open channels are investigated on the basis of different numerical and physical conditions. The efficiency and robustness of the schemes are tested by comparing model results with analytical or experimental solutions.

  19. Plasma-Assisted Pretreatment of Wheat Straw

    DEFF Research Database (Denmark)

    Schultz-Jensen, Nadja; Leipold, Frank; Bindslev, Henrik

    2011-01-01

    and milled particle size (the extent to which the wheat straw was milled) were investigated and optimized. The developed methodology offered the advantage of a simple and relatively fast (0.5–2 h) pretreatment allowing a dry matter concentration of 45–60%. FTIR measurements did not suggest any structural...... straw with desired lignin content because of the online analysis. The O3 consumption of wheat straw and its polymeric components, i.e., cellulose, hemicellulose, and lignin, as well as a mixture of these, dry as well as with 50% water, were studied. Furthermore, the process parameters dry matter content...

  20. Pretreatment and enzymatic hydrolysis of lignocellulosic biomass

    Science.gov (United States)

    Corredor, Deisy Y.

    The performance of soybean hulls and forage sorghum as feedstocks for ethanol production was studied. The main goal of this research was to increase fermentable sugars' yield through high-efficiency pretreatment technology. Soybean hulls are a potential feedstock for production of bio-ethanol due to their high carbohydrate content (≈50%) of nearly 37% cellulose. Soybean hulls could be the ideal feedstock for fuel ethanol production, because they are abundant and require no special harvesting and additional transportation costs as they are already in the plant. Dilute acid and modified steam-explosion were used as pretreatment technologies to increase fermentable sugars yields. Effects of reaction time, temperature, acid concentration and type of acid on hydrolysis of hemicellulose in soybean hulls and total sugar yields were studied. Optimum pretreatment parameters and enzymatic hydrolysis conditions for converting soybean hulls into fermentable sugars were identified. The combination of acid (H2SO4, 2% w/v) and steam (140°C, 30 min) efficiently solubilized the hemicellulose, giving a pentose yield of 96%. Sorghum is a tropical grass grown primarily in semiarid and dry parts of the world, especially in areas too dry for corn. The production of sorghum results in about 30 million tons of byproducts mainly composed of cellulose, hemicellulose, and lignin. Forage sorghum such as brown midrib (BMR) sorghum for ethanol production has generated much interest since this trait is characterized genetically by lower lignin concentrations in the plant compared with conventional types. Three varieties of forage sorghum and one variety of regular sorghum were characterized and evaluated as feedstock for fermentable sugar production. Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and X-Ray diffraction were used to determine changes in structure and chemical composition of forage sorghum before and after pretreatment and enzymatic hydrolysis

  1. Corn-milling pretreatment with anhydrous ammonia.

    Science.gov (United States)

    Taylor, Frank; Craig, James C; Kurantz, M J; Singh, Vijay

    2003-02-01

    Exposure to anhydrous ammonia has been suggested as a pretreatment for corn milling. Batches of corn were exposed to ammonia under controlled conditions. The amounts of ammonia absorbed and reacted with the corn were measured. The amounts were not more than are needed as nutritional supplement for yeast fermentation to ethanol. Loosening of the hull was observed qualitatively, and subsequent shearing in a disk mill followed by steeping for 2, 4, 6, or 8 h showed that germ could be recovered at higher yield and after a shorter steeping time compared to untreated control batches. Quality of oil was not affected by treatment with ammonia.

  2. Evaluation of efficient glucose release using sodium hydroxide and phosphoric acid as pretreating agents from the biomass of Sesbania grandiflora (L.) Pers.: A fast growing tree legume.

    Science.gov (United States)

    Mund, Nitesh K; Dash, Debabrata; Barik, Chitta R; Goud, Vaibhav V; Sahoo, Lingaraj; Mishra, Prasannajit; Nayak, Nihar R

    2017-07-01

    Sesbania grandiflora (L.) Pers. is one of the fast growing tree legumes having the efficiency to produce around 50tha -1 above ground dry matters in a year. In this study, biomass of 2years old S. grandiflora was selected for the chemical composition, pretreatments and enzymatic hydrolysis studies. The stem biomass with a wood density of 3.89±0.01gmcm -3 contains about 38% cellulose, 12% hemicellulose and 28% lignin. Enzymatic hydrolysis of pretreated biomass revealed that phosphoric acid (H 3 PO 4 ) pretreated samples even at lower cellulase loadings [1 Filter Paper Units (FPU)], could efficiently convert about 86% glucose, while, even at higher cellulase loadings (60FPU) alkali pretreated biomass could convert only about 58% glucose. The effectiveness of phosphoric acid pretreatment was also supported by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and Fourier transform infrared spectroscopy (FTIR) analysis. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Microbial Lipid Production from Enzymatic Hydrolysate of Pecan Nutshell Pretreated by Combined Pretreatment.

    Science.gov (United States)

    Qin, Lizhen; Qian, Hanyu; He, Yucai

    2017-12-01

    Biodiesel is a fuel composed of monoalkyl esters of long-chain fatty acids derived from renewable biomass sources. In this study, biomass waste pecan nutshell (PS) was attempted to be converted into microbial oil. For effective utilization of PS, sequential pretreatment with ethylene glycol-H2SO4-water (78:2:20, wt:wt:wt) at 130 °C for 30 min and aqueous ammonia (25 wt%) at 50 °C for 24 h was used to enhance its enzymatic saccharification. Significant linear correlation was obtained about delignification-saccharification (R 2 = 0.9507). SEM and FTIR results indicated that combination pretreatment could effectively remove lignin and xylan in PS for promoting its enzymatic saccharification. After 72 h, the reducing sugars from the hydrolysis of 50 g/L pretreated PS by combination pretreatment could be obtained at 73.6% yield. Using the recovered PS hydrolysates containing 20 g/L glucose as carbon source, microbial lipids produced from the PS hydrolysates by Rhodococcus opacus ACCC41043. Four fatty acids including palmitic acid (C16:0; 23.1%), palmitoleic acid (C16:1; 22.4%), stearic acid (C18:0; 15.3%), and oleic acid (C18:1; 23.9%) were distributed in total fatty acids. In conclusion, this strategy has potential application in the future.

  4. Efficient conversion of Hubrid Pennisetum to glucose by oxygen-aqueous alkaline ionic liquid media pretreatment under benign conditions.

    Science.gov (United States)

    Wang, Shengdan; Chen, Jiachuan; Yang, Guihua; Gao, Wenhua; Chen, Kefu

    2017-11-01

    To enhance the cellulose digestibility of energy grass hybrid Pennisetum (P. americanum×P. purpureum, HP) with low energy-consumption and high efficiency, a novel combinatorial pretreatment of oxygen-aqueous alkaline ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate ([Emim]Ac) media (OEA) was developed in this work. The combinatorial pretreatment was performed under the relatively low temperature (120°C), short retention time (30min), and 12bar oxygen pressure. The combinatorial pretreatment of OEA was demonstrated effectively for pretreatment of hybrid Pennisetum, which evidenced by the removal of lignin, degradation of carbohydrate, and porosity property of the regenerated biomass. Subsequently, a higher glucose recovery (96.9%) at a low enzyme loading (20FPU/g substrate) was obtained by the OEA pretreatment, and it was 9.1 times as much as the untreated samples. Overall, the novel OEA combinatorial pretreatment has the advantages of low thermal energy input and enzyme usage, and short retention time. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Effect of Plasma Pretreatments on the Bio-adhesive Functionalized by Biomimetic Catechol Groups to Human Dentin

    Science.gov (United States)

    Lee, Sangbae; Kim, Kwangmahn; Kim, Kyoungnam

    2012-10-01

    Plasma pretreatments have been introduced for modifying the surface chemistry of biomaterials. In an effort to improve the strength of the human dentin/bio-adhesive joint, oxygen plasma pretreatments to the bio-adhesive were investigated. Plasma treatments were carried out using custom-built and low pressure. Dentin were treated with plasma and used to prepare lap shear tests. Bio-adhesives were prepared synthesizing dopamine methacrylamide (DMA) monomer. DMA were copolymerized with 2-methoxyethylacrylate (MEA) by free radical polymerization. Proton nuclear magnetic resonance (^1H-NMR) and Gel permeation chromatography (GPC) analysis on samples of synthesized p(DMA-co-MEA) was performed to confirm that the resulting materials had the desired chemical structure. The effects of plasma pretreatments on surface chemistry were studied using Fourier transform infrared analysis (FTIR), and contact angle measurements. Oxygen plasma pretreatments enhanced adhesive strength by oxidizing of the catechol residue and creating a cross-linking as compared with control group. Furthermore plasma pretreatments lead to increase hydrophilicity of copolymers. Prospectively, the great potential of advanced technology in creation of the ``Plasma pretreatment to the DOPA adhesives'' would lead to the development of versatile method for coating to medial devices as well as dentin bonding.

  6. Dilute acid pretreatment of corncob for efficient sugar production

    Science.gov (United States)

    G.S. Wang; Jae-Won Lee; Junyong Zhu; Thomas W. Jeffries

    2011-01-01

    Aqueous dilute acid pretreatments of corncob were conducted using cylindrical pressure vessels in an oil bath. Pretreatments were conducted in a temperature range of 160–190 °C with acid-solution-to-solid-corncob ratio of 2. The acid concentration (v/v) in the pretreatment solution was varied from 0% to 0.7%, depending on temperature. This gives acid charge on ovendry-...

  7. K basins sludge removal sludge pretreatment system

    Energy Technology Data Exchange (ETDEWEB)

    Chang, H.L.

    1997-06-12

    The Spent Nuclear Fuels Program is in the process of planning activities to remove spent nuclear fuel and other materials from the 100-K Basins as a remediation effort for clean closure. The 105 K- East and K-West Basins store spent fuel, sludge, and debris. Sludge has accumulated in the 1 00 K Basins as a result of fuel oxidation and a slight amount of general debris being deposited, by settling, in the basin water. The ultimate intent in removing the sludge and fuel is to eliminate the environmental risk posed by storing fuel at the K Basins. The task for this project is to disposition specific constituents of sludge (metallic fuel) to produce a product stream through a pretreatment process that will meet the requirements, including a final particle size acceptable to the Tank Waste Remediation System (TWRS). The purpose of this task is to develop a preconceptual design package for the K Basin sludge pretreatment system. The process equipment/system is at a preconceptual stage, as shown in sketch ES-SNF-01 , while a more refined process system and material/energy balances are ongoing (all sketches are shown in Appendix C). Thus, the overall process and 0535 associated equipment have been conservatively selected and sized, respectively, to establish the cost basis and equipment layout as shown in sketches ES- SNF-02 through 08.

  8. [Study on optimal model of hypothetical work injury insurance scheme].

    Science.gov (United States)

    Ye, Chi-yu; Dong, Heng-jin; Wu, Yuan; Duan, Sheng-nan; Liu, Xiao-fang; You, Hua; Hu, Hui-mei; Wang, Lin-hao; Zhang, Xing; Wang, Jing

    2013-12-01

    To explore an optimal model of hypothetical work injury insurance scheme, which is in line with the wishes of workers, based on the problems in the implementation of work injury insurance in China and to provide useful information for relevant policy makers. Multistage cluster sampling was used to select subjects: first, 9 small, medium, and large enterprises were selected from three cities (counties) in Zhejiang Province, China according to the economic development, transportation, and cooperation; then, 31 workshops were randomly selected from the 9 enterprises. Face-to-face interviews were conducted by trained interviewers using a pre-designed questionnaire among all workers in the 31 workshops. After optimization of hypothetical work injury insurance scheme, the willingness to participate in the scheme increased from 73.87%to 80.96%; the average willingness to pay for the scheme increased from 2.21% (51.77 yuan) to 2.38% of monthly wage (54.93 Yuan); the median willingness to pay for the scheme increased from 1% to 1.2% of monthly wage, but decreased from 35 yuan to 30 yuan. The optimal model of hypothetical work injury insurance scheme covers all national and provincial statutory occupational diseases and work accidents, as well as consultations about occupational diseases. The scheme is supposed to be implemented worldwide by the National Social Security Department, without regional differences. The premium is borne by the state, enterprises, and individuals, and an independent insurance fund is kept in the lifetime personal account for each of insured individuals. The premium is not refunded in any event. Compensation for occupational diseases or work accidents is unrelated to the enterprises of the insured workers but related to the length of insurance. The insurance becomes effective one year after enrollment, while it is put into effect immediately after the occupational disease or accident occurs. The optimal model of hypothetical work injury insurance

  9. Biologically Pre-Treated Habitation Waste Water as a Sustainable Green Urine Pre-Treat Solution

    Science.gov (United States)

    Jackson, W. Andrew; Thompson, Bret; Sevanthi, Ritesh; Morse, Audra; Meyer, Caitlin; Callahan, Michael

    2017-01-01

    The ability to recover water from urine and flush water is a critical process to allow long term sustainable human habitation in space or bases on the moon or mars. Organic N present as urea or similar compounds can hydrolyze producing free ammonia. This reaction results in an increase in the pH converting ammonium to ammonia which is volatile and not removed by distillation. The increase in pH will also cause precipitation reactions to occur. In order to prevent this, urine on ISS is combined with a pretreat solution. While use of a pretreatment solution has been successful, there are numerous draw backs including: storage and use of highly hazardous solutions, limitations on water recovery (less than 85%), and production of brine with pore dewatering characteristics. We evaluated the use of biologically treated habitation wastewaters (ISS and early planetary base) to replace the current pretreat solution. We evaluated both amended and un-amended bioreactor effluent. For the amended effluent, we evaluated "green" pretreat chemicals including citric acid and citric acid amended with benzoic acid. We used a mock urine/air separator modeled after the urine collection assembly on ISS. The urine/air separator was challenged continually for >6 months. Depending on the test point, the separator was challenged daily with donated urine and flushed with amended or un-amended reactor effluent. We monitored the pH of the urine, flush solution and residual pH in the urine/air separator after each urine event. We also evaluated solids production and biological growth. Our results support the use of both un-amended and amended bioreactor effluent to maintain the operability of the urine /air separator. The ability to use bioreactor effluent could decrease consumable cost, reduce hazards associated with current pre-treat chemicals, allow other membrane based desalination processes to be utilized, and improve brine characteristics.

  10. Aiming for the complete utilization of sugar-beet pulp: Examination of the effects of mild acid and hydrothermal pretreatment followed by enzymatic digestion

    Directory of Open Access Journals (Sweden)

    Gruppen Harry

    2011-05-01

    Full Text Available Abstract Background Biomass use for the production of bioethanol or platform chemicals requires efficient breakdown of biomass to fermentable monosaccharides. Lignocellulosic feedstocks often require physicochemical pretreatment before enzymatic hydrolysis can begin. The optimal pretreatment can be different for different feedstocks, and should not lead to biomass destruction or formation of toxic products. Methods We examined the influence of six mild sulfuric acid or water pretreatments at different temperatures on the enzymatic degradability of sugar-beet pulp (SBP. Results We found that optimal pretreatment at 140°C of 15 minutes in water was able to solubilize 60% w/w of the total carbohydrates present, mainly pectins. More severe treatments led to the destruction of the solubilized sugars, and the subsequent production of the sugar-degradation products furfural, hydroxymethylfurfural, acetic acid and formic acid. The pretreated samples were successfully degraded enzymatically with an experimental cellulase preparation. Conclusions In this study, we found that pretreatment of SBP greatly facilitated the subsequent enzymatic degradation within economically feasible time ranges and enzyme levels. In addition, pretreatment of SBP can be useful to fractionate functional ingredients such as arabinans and pectins from cellulose. We found that the optimal combined severity factor to enhance the enzymatic degradation of SBP was between log R'0 = -2.0 and log R'0 = -1.5. The optimal pretreatment and enzyme treatment solubilized up to 80% of all sugars present in the SBP, including ≥90% of the cellulose.

  11. The influence of severity of bile flow reduction, cycloheximide, and methyl isobutyl ketone pretreatment on the kinetics of taurolithocholic acid disposition in the rat.

    Science.gov (United States)

    Dahlström-King, L; du Souich, P; Couture, J; Plaa, G L

    1990-06-15

    Pretreatment of rats with methyl isobutyl ketone (MIBK) potentiates the effect of taurolithocholic acid (TLCA) on bile flow, while cycloheximide pretreatment diminishes the cholestatic response. Experiments were performed to determine if the effects of the pretreatments were related to changes in the kinetic disposition of TLCA. Groups of rats were pretreated daily with either 7.5 mmol MIBK/kg po for 3 days or 3.55 mumol cycloheximide/kg ip for 2 days prior to an iv challenge of TLCA. Bile and blood samples were collected for 3 hr and the blood concentrations and biliary excretion of TLCA monitored. The severity of the bile flow reduction had a marked effect on the kinetic pattern of TLCA. The volume of distribution and bile disposition constant of TLCA decreased inversely with the severity of bile flow reduction, while the blood disposition constant increased. The total clearance of TLCA was not affected, but increasing the severity of the cholestasis altered the contribution of biliary and extrabiliary clearance to total clearance. The changes in the kinetics of TLCA observed in MIBK- and cycloheximide-pretreated rats were consistent with the effects the pretreatments exerted on TLCA-induced reduction in bile flow. They were interpreted to be the result of the effects of the pretreatments rather than their cause. Thus, pretreatment with MIBK and cycloheximide appears to exert a modulating effect on TLCA-induced cholestasis by mechanisms unrelated to an alteration of TLCA kinetic profile.

  12. Feasibility of Hydrothermal Pretreatment on Maize Silage for Bioethanol Production

    DEFF Research Database (Denmark)

    Xu, Jian; Thomsen, Mette Hedegaard; Thomsen, Anne Belinda

    2010-01-01

    The potential of maize silage as a feedstock to produce bioethanol was evaluated in the present study. The hydrothermal pretreatment with five different pretreatment severity factors (PSF) was employed to pretreat the maize silage and compared in terms of sugar recovery, toxic test, and ethanol...... the liquors from the five conditions were not toxic to the Baker’s yeast. Pretreatment under 195°C for 7 min had the similar PSF with that of 185°C for 15 min, and both gave the higher ethanol concentration of 19.92 and 19.98 g/L, respectively. The ethanol concentration from untreated maize silage was only 7...

  13. Nonhazardous Urine Pretreatment Method for Future Exploration Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A nonhazardous urine pretreatment system prototype is proposed that will stabilize urine against biological growth or chemical instabilities without using hazardous...

  14. Value added liquid products from waste biomass pyrolysis using pretreatments.

    Science.gov (United States)

    Das, Oisik; Sarmah, Ajit K

    2015-12-15

    Douglas fir wood, a forestry waste, was attempted to be converted into value added products by pretreatments followed by pyrolysis. Four different types of pretreatments were employed, namely, hot water treatment, torrefaction, sulphuric acid and ammonium phosphate doping. Subsequently, pyrolysis was done at 500°C and the resulting bio-oils were analysed for their chemical composition using Karl Fischer titration, thermogravimetry, ion exchange, and gas chromatography. Pretreatment with acid resulted in the highest yield of bio-oil (~60%). The acid and salt pretreatments were responsible for drastic reduction in the lignin oligomers and enhancement of water content in the pyrolytic liquid. The quantity of xylose/mannose reduced as a result of pretreatments. Although, the content of fermentable sugars remained similar across all the pretreatments, the yield of levoglucosan increased. Pretreatment of the biomass with acid yielded the highest amount of levoglucosan in the bio-oil (13.21%). The acid and salt pretreatments also elevated the amount of acetic acid in the bio-oils. Addition of acid and salt to the biomass altered the interaction of cellulose-lignin in the pyrolysis regime. Application of pretreatments should be based on the intended end use of the liquid product having a desired chemical composition. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. Nonhazardous Urine Pretreatment Method for Future Exploration Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A novel urine pretreatment that will prevent biological growth or chemical instabilities in urine without using hazardous chemicals is proposed. Untreated urine...

  16. Influence of dentin pretreatment on bond strength of universal adhesives.

    Science.gov (United States)

    Poggio, Claudio; Beltrami, Riccardo; Colombo, Marco; Chiesa, Marco; Scribante, Andrea

    2017-01-01

    Objective: The purpose of the present study was to compare bond strength of different universal adhesives under three different testing conditions: when no pretreatment was applied, after 37% phosphoric acid etching and after glycine application. Materials and methods: One hundred and fifty bovine permanent mandibular incisors were used as a substitute for human teeth. Five different universal adhesives were tested: Futurabond M+, Scotchbond Universal, Clearfil Universal Bond, G-Premio BOND, Peak Universal Bond. The adhesive systems were applied following each manufacturer's instructions. The teeth were randomly assigned to three different dentin surface pretreatments: no pretreatment agent (control), 37% phosphoric acid etching, glycine pretreatment. The specimens were placed in a universal testing machine in order to measure and compare bond strength values. Results: The Kruskal-Wallis analysis of variance and the Mann-Whitney test were applied to assess significant differences among the groups. Dentin pretreatments provided different bond strength values for the adhesives tested, while similar values were registered in groups without dentin pretreatment. Conclusions: In the present report, dentin surface pretreatment did not provide significant differences in shear bond strength values of almost all groups. Acid pretreatment lowered bond strength values of Futurabond and Peak Universal Adhesives, whereas glycine pretreatment increased bond strength values of G Praemio Bond adhesive system.

  17. CO.sub.2 Pretreatment prevents calcium carbonate formation

    Science.gov (United States)

    Neavel, Richard C.; Brunson, Roy J.; Chaback, Joseph J.

    1980-01-01

    Scale formation during the liquefaction of lower ranking coals and similar carbonaceous materials is significantly reduced and/or prevented by pretreatment with carbon dioxide. The carbon dioxide pretreatment is believed to convert the scale-forming components to the corresponding carbonate prior to liquefaction. The pretreatment is accomplished at a total pressure within the range from about 14 to about 68 atmospheres and a carbon dioxide partial pressure within the range from about 14 to about 34 atmospheres. Temperature during pretreatment will generally be within the range from about 100.degree. to about 200.degree. C.

  18. 40 CFR 417.84 - Pretreatment standards for existing sources.

    Science.gov (United States)

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Liquid Soaps Subcategory § 417.84 Pretreatment standards for existing sources. Any existing source...

  19. Nonstandard finite difference schemes for differential equations

    Directory of Open Access Journals (Sweden)

    Mohammad Mehdizadeh Khalsaraei

    2014-12-01

    Full Text Available In this paper, the reorganization of the denominator of the discrete derivative and nonlocal approximation of nonlinear terms are used in the design of nonstandard finite difference schemes (NSFDs. Numerical examples confirming then efficiency of schemes, for some differential equations are provided. In order to illustrate the accuracy of the new NSFDs, the numerical results are compared with standard methods.

  20. Privacy Preserving Mapping Schemes Supporting Comparison

    NARCIS (Netherlands)

    Tang, Qiang

    2010-01-01

    To cater to the privacy requirements in cloud computing, we introduce a new primitive, namely Privacy Preserving Mapping (PPM) schemes supporting comparison. An PPM scheme enables a user to map data items into images in such a way that, with a set of images, any entity can determine the <, =, >

  1. Consolidation of the health insurance scheme

    CERN Multimedia

    Association du personnel

    2009-01-01

    In the last issue of Echo, we highlighted CERN’s obligation to guarantee a social security scheme for all employees, pensioners and their families. In that issue we talked about the first component: pensions. This time we shall discuss the other component: the CERN Health Insurance Scheme (CHIS).

  2. A hierarchical classification scheme of psoriasis images

    DEFF Research Database (Denmark)

    Maletti, Gabriela Mariel; Ersbøll, Bjarne Kjær

    2003-01-01

    A two-stage hierarchical classification scheme of psoriasis lesion images is proposed. These images are basically composed of three classes: normal skin, lesion and background. The scheme combines conventional tools to separate the skin from the background in the first stage, and the lesion from...

  3. Mobile Machine for E-payment Scheme

    OpenAIRE

    Sattar J Aboud

    2010-01-01

    In this article e-payment scheme by mobile machine is considered. The requirements for a mobile machine in e-payment are presented, particularly when merchant employing accounts for payments and when using advertising. In the proposed scheme we will use the public key infrastructure and certificate for authenticate purchaser and merchant and to secure the communication between them.

  4. THROUGHPUT ANALYSIS OF EXTENDED ARQ SCHEMES

    African Journals Online (AJOL)

    PUBLICATIONS1

    formation transmitted in digital communication systems. Such schemes ... Department of Electronics and Telecommunications Engineering,. University of Dar es ...... (2): 165-176. Kundaeli, H. N. (2013). Throughput-Delay. Analysis of the SR-ST-GBN ARQ Scheme. Mediterranean Journal of Electronics and. Communication.

  5. Macromolecular structure analysis and effective liquefaction pretreatment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Suuberg, E.M.; Yun, Y.; Lilly, W.D.; Leung, K.; Gates, T.; Otake, Y.; Deevi, S.C.

    1994-07-01

    This project was concerned with characterizing the changes in coal macromolecular structure, that are of significance for liquefaction pretreatments of coal. The macromolecular structure of the insoluble portion of coal is difficult to characterize. Techniques that do so indirectly (based upon, for example, NMR and FTIR characterizations of atomic linkages) are not particularly sensitive for this purpose. Techniques that characterize the elastic structure (such as solvent swelling) are much more sensitive to subtle changes in the network structure. It is for this reason that we focused upon these techniques. The overall objective involved identifying pretreatments that reduce the crosslinking (physical or chemical) of the network structure, and thus lead to materials that can be handled to a greater extent by traditional liquid-phase processing techniques. These techniques tend to be inherently more efficient at producing desirable products. This report is divided into seven chapters. Chapter II summarizes the main experimental approaches used throughout the project, and summarizes the main findings on the Argonne Premium coal samples. Chapter III considers synergistic effects of solvent pairs. It is divided into two subsections. The first is concerned with mixtures of CS{sub 2} with electron donor solvents. The second subsection is concerned with aromatic hydrocarbon - alcohol or hydrocarbon - alcohol mixtures, as might be of interest for preliquefaction delivery of catalysts into bituminous coals. Chapter IV deals with questions of how oxidation might influence the results that are obtained. Chapter V briefly details what conclusions may be drawn concerning the elastic behavior of coals, and the effects of thermal treatments on this behavior. Chapter VI is concerned with theories to describe the action of solvents that are capable of dissociating non-covalent crosslinks. Finally, Chapter VII discusses the practical implications of the study.

  6. Alkaline and ultrasound assisted alkaline pretreatment for intensification of delignification process from sustainable raw-material.

    Science.gov (United States)

    Subhedar, Preeti B; Gogate, Parag R

    2014-01-01

    Alkaline and ultrasound-assisted alkaline pretreatment under mild operating conditions have been investigated for intensification of delignification. The effect of NaOH concentration, biomass loading, temperature, ultrasonic power and duty cycle on the delignification has been studied. Most favorable conditions for only alkaline pretreatment were alkali concentration of 1.75 N, solid loading of 0.8% (w/v), temperature of 353 K and pretreatment time of 6 h and under these conditions, 40.2% delignification was obtained. In case of ultrasound-assisted alkaline approach, most favorable conditions obtained were alkali concentration of 1N, paper loading of 0.5% (w/v), sonication power of 100 W, duty cycle of 80% and pretreatment time of 70 min and the delignification obtained in ultrasound-assisted alkaline approach under these conditions was 80%. The material samples were characterized by FTIR, SEM, XRD and TGA technique. The lignin was recovered from solution by precipitation method and was characterized by FTIR, GPC and TGA technique. Copyright © 2013 Elsevier B.V. All rights reserved.

  7. Glutaraldehyde pretreatment blocks temperature-induced high-affinity (/sup 3/H) tryptamine binding

    Energy Technology Data Exchange (ETDEWEB)

    Serikyaku, S.; Ishitani, R.

    1988-01-01

    The effect of glutaraldehyde (and Azure A) on temperature-sensitive high-affinity (/sup 3/H) tryptamine binding was investigated in rat brain synaptic plasma membranes. In the 0.01-0.1 % concentration range, the glutaraldehyde pretreatment preferentially inhibited only the above-mentioned portion of the binding, whereas the posttreatment of this reagent had no effect. On the other hand, in cases of pretreatment or posttreatment, a concentration of glutaraldehyde as high as 0.1 % was inactive on the basal (/sup 3/H) ligand binding capacity of the membranes. Furthermore, it was revealed that the Scatchard plot of (/sup 3/H) tryptamine binding in membranes pretreated with glutaraldehyde conformed to a straight line, as did a similar plot of temperature-independent binding. And, it was interesting to find that the binding parameters (K/sub D/ and B/sub max/ values) of both samples corresponded closely to each other. On the contrary, in all concentrations, Azure A affected nonspecifically both the temperature-dependent and the independent (/sup 3/H) tryptamine binding to the same degree, regardless of whether or not there was pretreatment or posttreatment. 17 references, 2 figures, 1 table.

  8. Microwave Assisted Alkali Pretreatment of Rice Straw for Enhancing Enzymatic Digestibility

    Directory of Open Access Journals (Sweden)

    Renu Singh

    2014-01-01

    Full Text Available Rapid industrialization, increasing energy demand, and climate change are the conditions that forced the researchers to develop a clean, efficient, renewable, and sustainable source of energy which has a potential to replace fossil fuels. Ethanol is one of the attractive and suitable renewable energy resources. In present study, effectiveness of microwave pretreatment in combination with sodium hydroxide (NaOH for increasing enzymatic hydrolysis of rice straw has been investigated and under optimum conditions obtained a maximum reducing sugar (1334.79 µg/mL through microwave assisted NaOH pretreatment. Chemical composition analysis and scanning electron microscope (SEM images showed that the removal of lignin, hemicellulose, and silicon content is more in microwave assisted NaOH pretreatment than the blank sample. X-ray diffraction (XRD analysis revealed that the crystallinity index of rice straw treated with microwave assisted alkali (54.55% is significantly high as compared to the blank (49.07%. Hence, the present study proves that microwave assisted alkali pretreatment can effectively enhance enzymatic digestibility of rice straw and it is feasible to convert rice straw for bioethanol production.

  9. Efficient, high-speed methane fermentation for sewage sludge using subcritical water hydrolysis as pretreatment.

    Science.gov (United States)

    Yoshida, Hiroyuki; Tokumoto, Hayato; Ishii, Kyoko; Ishii, Ryo

    2009-06-01

    A novel biomass-energy process for the production of methane from sewage sludge using a subcritical water (sub-CW) hydrolysis reaction as pretreatment is proposed. The main substances of sewage sludge hydrolyzed by sub-CW at 513 K for 10 min were acetic acid, formic acid, pyroglutamic acid, alanine, and glycine. Fermentation experiments were conducted in an anaerobic-sludge reactor for two different samples: real sewage sludge and a model solution containing components typically produced by the sub-CW pretreatment of sewage sludge. In the experiment for the sub-CW pretreatment of sewage sludge, methane generation was twice that for non-pretreatment after 3 days of incubation. In the model experiment, the methane conversion was about 40% with the application of mixture of organic acids and amino acids after 5 days of incubation. Furthermore, the methane conversion was about 60% for 2 days when only organic acids, such as acetic acid and formic acid, were applied. Because acetic acid is the key intermediate and main precursor of the methanogenesis step, fermentation experiments were conducted in an anaerobic-sludge reactor with high concentrations of acetic acid (0.01-0.1M). Nearly 100% of acetic acid was converted to methane and carbon dioxide in 1-3 days.

  10. Cellulose Nanofibers Prepared via Pretreatment Based on Oxone® Oxidation

    Directory of Open Access Journals (Sweden)

    Chang-Qing Ruan

    2017-12-01

    Full Text Available Softwood sulfite bleached cellulose pulp was oxidized with Oxone® and cellulose nanofibers (CNF were produced after mechanical treatment with a high-shear homogenizer. UV-vis transmittance of dispersions of oxidized cellulose with different degrees of mechanical treatment was recorded. Scanning electron microscopy (SEM micrographs and atomic force microscopy (AFM images of samples prepared from the translucent dispersions showed individualized cellulose nanofibers with a width of about 10 nm and lengths of a few hundred nm. All results demonstrated that more translucent CNF dispersions could be obtained after the pretreatment of cellulose pulp by Oxone® oxidation compared with the samples produced without pretreatment. The intrinsic viscosity of the cellulose decreased after oxidation and was further reduced after mechanical treatment. Almost translucent cellulose films were prepared from the dispersions of individualized cellulose nanofibers. The procedure described herein constitutes a green, novel, and efficient route to access CNF.

  11. Anaerobic digestion of organic fraction of municipal solid waste combining two pretreatment modalities, high temperature microwave and hydrogen peroxide.

    Science.gov (United States)

    Shahriari, Haleh; Warith, Mostafa; Hamoda, Mohamed; Kennedy, Kevin J

    2012-01-01

    In order to enhance anaerobic digestion (AD) of the organic fraction of municipal solid waste (OFMSW), pretreatment combining two modalities, microwave (MW) heating in presence or absence of hydrogen peroxide (H(2)O(2)) were investigated. The main pretreatment variables affecting the characteristics of the OFMSW were temperature (T) via MW irradiation and supplemental water additions of 20% and 30% (SWA20 and SW30). Subsequently, the focus of this study was to evaluate mesophilic batch AD performance in terms of biogas production, as well as changes in the characteristics of the OFMSW post digestion. A high MW induced temperature range (115-175°C) was applied, using sealed vessels and a bench scale MW unit equipped with temperature and pressure controls. Biochemical methane potential (BMP) tests were conducted on the whole OFMSW as well as the liquid fractions. The whole OFMSW pretreated at 115°C and 145°C showed 4-7% improvement in biogas production over untreated OFMSW (control). When pretreated at 175°C, biogas production decreased due to formation of refractory compounds, inhibiting the digestion. For the liquid fraction of OFMSW, the effect of pretreatment on the cumulative biogas production (CBP) was more pronounced for SWA20 at 145°C, with a 26% increase in biogas production after 8days of digestion, compared to the control. When considering the increased substrate availability in the liquid fraction after MW pretreatment, a 78% improvement in biogas production vs. the control was achieved. Combining MW and H(2)O(2) modalities did not have a positive impact on OFMSW stabilization and enhanced biogas production. In general, all samples pretreated with H(2)O(2) displayed a long lag phase and the CBP was usually lower than MW irradiated only samples. First order rate constant was calculated. Copyright © 2011 Elsevier Ltd. All rights reserved.

  12. Understanding of alkaline pretreatment parameters for corn stover enzymatic saccharification

    Directory of Open Access Journals (Sweden)

    Chen Ye

    2013-01-01

    Full Text Available Abstract Background Previous research on alkaline pretreatment has mainly focused on optimization of the process parameters to improve substrate digestibility. To achieve satisfactory sugar yield, extremely high chemical loading and enzyme dosages were typically used. Relatively little attention has been paid to reduction of chemical consumption and process waste management, which has proven to be an indispensable component of the bio-refineries. To indicate alkali strength, both alkali concentration in pretreatment solution (g alkali/g pretreatment liquor or g alkali/L pretreatment liquor and alkali loading based on biomass solids (g alkali/g dry biomass have been widely used. The dual approaches make it difficult to compare the chemical consumption in different process scenarios while evaluating the cost effectiveness of this pretreatment technology. The current work addresses these issues through pretreatment of corn stover at various combinations of pretreatment conditions. Enzymatic hydrolysis with different enzyme blends was subsequently performed to identify the effects of pretreatment parameters on substrate digestibility as well as process operational and capital costs. Results The results showed that sodium hydroxide loading is the most dominant variable for enzymatic digestibility. To reach 70% glucan conversion while avoiding extensive degradation of hemicellulose, approximately 0.08 g NaOH/g corn stover was required. It was also concluded that alkali loading based on total solids (g NaOH/g dry biomass governs the pretreatment efficiency. Supplementing cellulase with accessory enzymes such as α-arabinofuranosidase and β-xylosidase significantly improved the conversion of the hemicellulose by 6–17%. Conclusions The current work presents the impact of alkaline pretreatment parameters on the enzymatic hydrolysis of corn stover as well as the process operational and capital investment costs. The high chemical consumption for alkaline

  13. Selecting registration schemes in case of interstitial lung disease follow-up in CT

    Energy Technology Data Exchange (ETDEWEB)

    Vlachopoulos, Georgios; Korfiatis, Panayiotis; Skiadopoulos, Spyros; Kazantzi, Alexandra [Department of Medical Physics, School of Medicine,University of Patras, Patras 26504 (Greece); Kalogeropoulou, Christina [Department of Radiology, School of Medicine, University of Patras, Patras 26504 (Greece); Pratikakis, Ioannis [Department of Electrical and Computer Engineering, Democritus University of Thrace, Xanthi 67100 (Greece); Costaridou, Lena, E-mail: costarid@upatras.gr [Department of Medical Physics, School of Medicine, University of Patras, Patras 26504 (Greece)

    2015-08-15

    Purpose: Primary goal of this study is to select optimal registration schemes in the framework of interstitial lung disease (ILD) follow-up analysis in CT. Methods: A set of 128 multiresolution schemes composed of multiresolution nonrigid and combinations of rigid and nonrigid registration schemes are evaluated, utilizing ten artificially warped ILD follow-up volumes, originating from ten clinical volumetric CT scans of ILD affected patients, to select candidate optimal schemes. Specifically, all combinations of four transformation models (three rigid: rigid, similarity, affine and one nonrigid: third order B-spline), four cost functions (sum-of-square distances, normalized correlation coefficient, mutual information, and normalized mutual information), four gradient descent optimizers (standard, regular step, adaptive stochastic, and finite difference), and two types of pyramids (recursive and Gaussian-smoothing) were considered. The selection process involves two stages. The first stage involves identification of schemes with deformation field singularities, according to the determinant of the Jacobian matrix. In the second stage, evaluation methodology is based on distance between corresponding landmark points in both normal lung parenchyma (NLP) and ILD affected regions. Statistical analysis was performed in order to select near optimal registration schemes per evaluation metric. Performance of the candidate registration schemes was verified on a case sample of ten clinical follow-up CT scans to obtain the selected registration schemes. Results: By considering near optimal schemes common to all ranking lists, 16 out of 128 registration schemes were initially selected. These schemes obtained submillimeter registration accuracies in terms of average distance errors 0.18 ± 0.01 mm for NLP and 0.20 ± 0.01 mm for ILD, in case of artificially generated follow-up data. Registration accuracy in terms of average distance error in clinical follow-up data was in the

  14. Influence of combined pretreatments on color parameters during convective drying of Mirabelle plum ( Prunus domestica subsp. syriaca)

    Science.gov (United States)

    Dehghannya, Jalal; Gorbani, Rasoul; Ghanbarzadeh, Babak

    2017-07-01

    Discoloration and browning are caused primarily by various reactions, including Maillard condensation of hexoses and amino components, phenol polymerization and pigment destruction. Convective drying can be combined with various pretreatments to help reduce undesired color changes and improve color parameters of dried products. In this study, effects of ultrasound-assisted osmotic dehydration as a pretreatment before convective drying on color parameters of Mirabelle plum were investigated. Variations of L* (lightness), a* (redness/greenness), b* (yellowness/blueness), total color change (ΔE), chroma, hue angle and browning index values were presented versus drying time during convective drying of control and pretreated Mirabelle plums as influenced by ultrasonication time, osmotic solution concentration and immersion time in osmotic solution. Samples pretreated with ultrasound for 30 min and osmotic solution concentration of 70% had a more desirable color among all other pretreated samples, with the closest L*, a* and b* values to the fresh one, showing that ultrasound and osmotic dehydration are beneficial to the color of final products after drying.

  15. WOOD PRE-TREATMENT INFLUENCE ON THE HYDRATION OF PORTLAND CEMENT IN COMBINATION WITH SOME TROPICAL WOOD SPECIES

    Directory of Open Access Journals (Sweden)

    Nusirat Aderinsola SADIKU

    2014-06-01

    Full Text Available The influence of three pre-treatment methods on the hydration characteristics of Portland cement in combination with three tropical hardwood species was investigated. The maximum hydration temperature and time to reach maximum hydration temperature were analysed for the wood-cement-water mixtures of the three species after removing inhibitory extractives of wood samples by extraction with 5% Sodium hydroxide (NaOH, cold and hot water after removing inhibitory extractives of wood samples. There were differences in the hydration reaction of the wood species with Portland cement using the different pre-treatment methods. The compatibility of the wood species with Portland cement improved following pre-treatment. Sodium hydroxide pre-treatment had the most significant effect followed by hot water. Terminalia ivorensis (Idigbo, and Antiaris africana (Oriro species showed considerable improvement in their compatibility with Portland cement at 5% Sodium hydroxide pre-treatment with maximum hydration temperature of 65oC where Arere had 60.5oC where both cold and hot water were unable to raise the hydration temperature beyond 55.5oC . This study shows that the wood species requires more than cold and hot water extraction to make them suitable for wood cement composite materials as extraction with sodium hydroxide (1% solution was found to be the most effective treatment for the wood species under investigation.

  16. Effect of EDTA Conditioning and Carbodiimide Pretreatment on the Bonding Performance of All-in-One Self-Etch Adhesives

    Directory of Open Access Journals (Sweden)

    Shipra Singh

    2015-01-01

    Full Text Available Objective. This study evaluated the effect of ethylenediaminetetraacetic acid (EDTA conditioning and carbodiimide (EDC pretreatment on the shear bond strength of two all-in-one self-etch adhesives to dentin. Methods. Flat coronal dentin surfaces were prepared on one hundred and sixty extracted human molars. Teeth were randomly divided into eight groups according to two different self-etch adhesives used [G-Bond and OptiBond-All-In-One] and four different surface pretreatments: (a adhesive applied following manufacturer’s instructions; (b dentin conditioning with 24% EDTA gel prior to application of adhesive; (c EDC pretreatment followed by application of adhesive; (d application of EDC on EDTA conditioned dentin surface followed by application of adhesive. Composite restorations were placed in all the samples. Ten samples from each group were subjected to immediate and delayed (6-month storage in artificial saliva shear bond strength evaluation. Data collected was subjected to statistical analysis using three-way ANOVA and post hoc Tukey’s test at a significance level of p<0.05.  Results and Conclusion. EDTA preconditioning as well as EDC pretreatment alone had no significant effect on the immediate and delayed bond strengths of either of the adhesives. However, EDC pretreatment on EDTA conditioned dentin surface resulted in preservation of resin-dentin bond strength of both adhesives with no significant fall over six months.

  17. Influence of pre-treatment step on PAHs analyses in contaminated soils.

    Science.gov (United States)

    Belkessam, Laurence; Lecomte, Paul; Milon, Véronique; Laboudigue, Agnès

    2005-01-01

    There is no specific standardization for the pre-treatment of a soil sample for PAHs analyses. The ISO/FDIS 14507 method for soil quality gives a guidance for sample pre-treatment before measurement of organic contaminants in soil. It refers to cryogenic crushing which is not so easy to carry out. So, analysts lead to develop in house methods which can be very different from a laboratory to another and can involve deviations in the pollution quantification. This study has explored different ways of drying, grinding and sieving in order to determine the influence of the soil sample handling on the measured pollutant concentration. It appears that the influence of pre-treatment depends on the soil nature and on the PAHs distribution. As a conclusion, it is advised "light" drying ways like air drying or drying at 40 degrees C in a drying oven instead of more "drastic" ways (freeze-drying, cryogenic crushing) which can induce some losses. Crushing and sieving are also recommended for more reproducible measures.

  18. Enhanced biomass delignification and enzymatic saccharification of canola straw by steam-explosion pretreatment.

    Science.gov (United States)

    Garmakhany, Amir Daraei; Kashaninejad, Mahdi; Aalami, Mehran; Maghsoudlou, Yahya; Khomieri, Mortza; Tabil, Lope G

    2014-06-01

    In recent decades, bioconversion of lignocellulosic biomass to biofuel (ethanol and biodiesel) has been extensively investigated. The three main chemical constituents of biomass are cellulose, hemicellulose and lignin. Cellulose and hemicellulose are polysaccharides of primarily fermentable sugars, glucose and xylose respectively. Hemicellulose also includes small fermentable fractions of arabinose, galactose and mannose. The main issue in converting lignocellulosic biomass to fuel ethanol is the accessibility of the polysaccharides for enzymatic breakdown into monosaccharides. This study focused on the use of steam explosion as the pretreatment method for canola straw as lignocellulosic biomass. Result showed that steam explosion treatment of biomass increased cellulose accessibility and it hydrolysis by enzyme hydrolysis. Following 72 h of enzyme hydrolysis, a maximum cellulose conversion to glucose yield of 29.40% was obtained for the steam-exploded sample while the control showed 11.60% glucose yields. Steam explosion pretreatment increased glucose production and glucose yield by 200% and 153.22%, respectively, compared to the control sample. The crystalline index increased from 57.48% in untreated canola straw to 64.72% in steam-exploded samples. Steam explosion pretreatment of biomass increased cellulose accessibility, and enzymatic hydrolysis increased glucose production and glucose yield of canola straw. © 2013 Society of Chemical Industry.

  19. Techno-economic analysis of organosolv pretreatment process from lignocellulosic biomass

    DEFF Research Database (Denmark)

    Rodrigues Gurgel da Silva, Andrè; Errico, Massimiliano; Rong, Ben-Guang

    2018-01-01

    data, we propose a feasible process flowsheet for organosolv pretreatment. Simulation of the pretreatment process provided mass and energy balances for a techno-economic analysis, and the values were compared with the most prevalent and mature pretreatment method: diluted acid. Organosolv pretreatment...... in the sensitivity analysis turned into possible savings of 42.8% in the minimum ethanol selling price for organosolv pretreatment....

  20. Optimal Face-Iris Multimodal Fusion Scheme

    Directory of Open Access Journals (Sweden)

    Omid Sharifi

    2016-06-01

    Full Text Available Multimodal biometric systems are considered a way to minimize the limitations raised by single traits. This paper proposes new schemes based on score level, feature level and decision level fusion to efficiently fuse face and iris modalities. Log-Gabor transformation is applied as the feature extraction method on face and iris modalities. At each level of fusion, different schemes are proposed to improve the recognition performance and, finally, a combination of schemes at different fusion levels constructs an optimized and robust scheme. In this study, CASIA Iris Distance database is used to examine the robustness of all unimodal and multimodal schemes. In addition, Backtracking Search Algorithm (BSA, a novel population-based iterative evolutionary algorithm, is applied to improve the recognition accuracy of schemes by reducing the number of features and selecting the optimized weights for feature level and score level fusion, respectively. Experimental results on verification rates demonstrate a significant improvement of proposed fusion schemes over unimodal and multimodal fusion methods.

  1. Towards an "All Speed" Unstructured Upwind Scheme

    Science.gov (United States)

    Loh, Ching Y.; Jorgenson, Philip C.E.

    2009-01-01

    In the authors previous studies [1], a time-accurate, upwind finite volume method (ETAU scheme) for computing compressible flows on unstructured grids was proposed. The scheme is second order accurate in space and time and yields high resolution in the presence of discontinuities. The scheme features a multidimensional limiter and multidimensional numerical dissipation. These help to stabilize the numerical process and to overcome the annoying pathological behaviors of upwind schemes. In the present paper, it will be further shown that such multidimensional treatments also lead to a nearly all-speed or Mach number insensitive upwind scheme. For flows at very high Mach number, e.g., 10, local numerical instabilities or the pathological behaviors are suppressed, while for flows at very low Mach number, e.g., 0.02, computation can be directly carried out without invoking preconditioning. For flows in different Mach number regimes, i.e., low, medium, and high Mach numbers, one only needs to adjust one or two parameters in the scheme. Several examples with low and high Mach numbers are demonstrated in this paper. Thus, the ETAU scheme is applicable to a broad spectrum of flow regimes ranging from high supersonic to low subsonic, appropriate for both CFD (computational fluid dynamics) and CAA (computational aeroacoustics).

  2. Ponzi scheme diffusion in complex networks

    Science.gov (United States)

    Zhu, Anding; Fu, Peihua; Zhang, Qinghe; Chen, Zhenyue

    2017-08-01

    Ponzi schemes taking the form of Internet-based financial schemes have been negatively affecting China's economy for the last two years. Because there is currently a lack of modeling research on Ponzi scheme diffusion within social networks yet, we develop a potential-investor-divestor (PID) model to investigate the diffusion dynamics of Ponzi scheme in both homogeneous and inhomogeneous networks. Our simulation study of artificial and real Facebook social networks shows that the structure of investor networks does indeed affect the characteristics of dynamics. Both the average degree of distribution and the power-law degree of distribution will reduce the spreading critical threshold and will speed up the rate of diffusion. A high speed of diffusion is the key to alleviating the interest burden and improving the financial outcomes for the Ponzi scheme operator. The zero-crossing point of fund flux function we introduce proves to be a feasible index for reflecting the fast-worsening situation of fiscal instability and predicting the forthcoming collapse. The faster the scheme diffuses, the higher a peak it will reach and the sooner it will collapse. We should keep a vigilant eye on the harm of Ponzi scheme diffusion through modern social networks.

  3. Secure Electronic Cash Scheme with Anonymity Revocation

    Directory of Open Access Journals (Sweden)

    Baoyuan Kang

    2016-01-01

    Full Text Available In a popular electronic cash scheme, there are three participants: the bank, the customer, and the merchant. First, a customer opens an account in a bank. Then, he withdraws an e-cash from his account and pays it to a merchant. After checking the electronic cash’s validity, the merchant accepts it and deposits it to the bank. There are a number of requirements for an electronic cash scheme, such as, anonymity, unforgeability, unreusability, divisibility, transferability, and portability. Anonymity property of electronic cash schemes can ensure the privacy of payers. However, this anonymity property is easily abused by criminals. In 2011, Chen et al. proposed a novel electronic cash system with trustee-based anonymity revocation from pairing. On demand, the trustee can disclose the identity for e-cash. But, in this paper we point out that Chen et al.’s scheme is subjected to some drawbacks. To contribute secure electronic cash schemes, we propose a new offline electronic cash scheme with anonymity revocation. We also provide the formally security proofs of the unlinkability and unforgeability. Furthermore, the proposed scheme ensures the property of avoiding merchant frauds.

  4. An efficient multi-scale Green's function reaction dynamics scheme.

    Science.gov (United States)

    Sbailò, Luigi; Noé, Frank

    2017-11-14

    Molecular Dynamics-Green's Function Reaction Dynamics (MD-GFRD) is a multiscale simulation method for particle dynamics or particle-based reaction-diffusion dynamics that is suited for systems involving low particle densities. Particles in a low-density region are just diffusing and not interacting. In this case, one can avoid the costly integration of microscopic equations of motion, such as molecular dynamics (MD), and instead turn to an event-based scheme in which the times to the next particle interaction and the new particle positions at that time can be sampled. At high (local) concentrations, however, e.g., when particles are interacting in a nontrivial way, particle positions must still be updated with small time steps of the microscopic dynamical equations. The efficiency of a multi-scale simulation that uses these two schemes largely depends on the coupling between them and the decisions when to switch between the two scales. Here we present an efficient scheme for multi-scale MD-GFRD simulations. It has been shown that MD-GFRD schemes are more efficient than brute-force molecular dynamics simulations up to a molar concentration of 102 μM. In this paper, we show that the choice of the propagation domains has a relevant impact on the computational performance. Domains are constructed using a local optimization of their sizes and a minimal domain size is proposed. The algorithm is shown to be more efficient than brute-force Brownian dynamics simulations up to a molar concentration of 103 μM and is up to an order of magnitude more efficient compared with previous MD-GFRD schemes.

  5. An efficient multi-scale Green's function reaction dynamics scheme

    Science.gov (United States)

    Sbailò, Luigi; Noé, Frank

    2017-11-01

    Molecular Dynamics-Green's Function Reaction Dynamics (MD-GFRD) is a multiscale simulation method for particle dynamics or particle-based reaction-diffusion dynamics that is suited for systems involving low particle densities. Particles in a low-density region are just diffusing and not interacting. In this case, one can avoid the costly integration of microscopic equations of motion, such as molecular dynamics (MD), and instead turn to an event-based scheme in which the times to the next particle interaction and the new particle positions at that time can be sampled. At high (local) concentrations, however, e.g., when particles are interacting in a nontrivial way, particle positions must still be updated with small time steps of the microscopic dynamical equations. The efficiency of a multi-scale simulation that uses these two schemes largely depends on the coupling between them and the decisions when to switch between the two scales. Here we present an efficient scheme for multi-scale MD-GFRD simulations. It has been shown that MD-GFRD schemes are more efficient than brute-force molecular dynamics simulations up to a molar concentration of 102 μM. In this paper, we show that the choice of the propagation domains has a relevant impact on the computational performance. Domains are constructed using a local optimization of their sizes and a minimal domain size is proposed. The algorithm is shown to be more efficient than brute-force Brownian dynamics simulations up to a molar concentration of 103 μM and is up to an order of magnitude more efficient compared with previous MD-GFRD schemes.

  6. Deitmar schemes, graphs and zeta functions

    Science.gov (United States)

    Mérida-Angulo, Manuel; Thas, Koen

    2017-07-01

    In Thas (2014) it was explained how one can naturally associate a Deitmar scheme (which is a scheme defined over the field with one element, F1) to a so-called ;loose graph; (which is a generalization of a graph). Several properties of the Deitmar scheme can be proven easily from the combinatorics of the (loose) graph, and known realizations of objects over F1 such as combinatorial F1-projective and F1-affine spaces exactly depict the loose graph which corresponds to the associated Deitmar scheme. In this paper, we first modify the construction of loc. cit., and show that Deitmar schemes which are defined by finite trees (with possible end points) are ;defined over F1; in Kurokawa's sense; we then derive a precise formula for the Kurokawa zeta function for such schemes (and so also for the counting polynomial of all associated Fq-schemes). As a corollary, we find a zeta function for all such trees which contains information such as the number of inner points and the spectrum of degrees, and which is thus very different than Ihara's zeta function (which is trivial in this case). Using a process called ;surgery,; we show that one can determine the zeta function of a general loose graph and its associated {Deitmar, Grothendieck}-schemes in a number of steps, eventually reducing the calculation essentially to trees. We study a number of classes of examples of loose graphs, and introduce the Grothendieck ring ofF1-schemes along the way in order to perform the calculations. Finally, we include a computer program for performing more tedious calculations, and compare the new zeta function to Ihara's zeta function for graphs in a number of examples.

  7. Optimization of the dilute maleic acid pretreatment of wheat straw

    NARCIS (Netherlands)

    Kootstra, A.M.J.; Beeftink, H.H.; Scott, E.L.; Sanders, J.P.M.

    2009-01-01

    Background - In this study, the dilute maleic acid pretreatment of wheat straw is optimized, using pretreatment time, temperature and maleic acid concentration as design variables. A central composite design was applied to the experimental set up. The response factors used in this study are: (1)

  8. Coagulation pretreatment for ultrafiltration of deinking effluents containing flexographic inks

    Science.gov (United States)

    Bruno Chabot; Gopal A. Krishnagopalan; Said Abubakr

    1999-01-01

    This study was carried out to determine the potential of coagulation pretreatment with organic or inorganic coagulants to improve ultrafiltration performance during processing of wash deinking effluents containing flexographic inks. Wash filtrate effluents generated from mixtures of old flexographic and offset newspapers and old magazines were pretreated with a...

  9. 40 CFR 408.336 - Pretreatment standards for new sources.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Pretreatment standards for new sources. 408.336 Section 408.336 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT... Subcategory § 408.336 Pretreatment standards for new sources. Any new source subject to this subpart that...

  10. 40 CFR 421.336 - Pretreatment standards for new sources.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Pretreatment standards for new sources. 421.336 Section 421.336 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT... Subcategory § 421.336 Pretreatment standards for new sources. Except as provided in 40 CFR 403.7, any new...

  11. Synergistic Effect of Trehalose and Saccharose Pretreatment on ...

    African Journals Online (AJOL)

    Purpose: To investigate the synergistic effect of trehalose and saccharose pretreatment on maintenance of lyophilized human red blood cell (RBC) quality. Methods: RBCs were pre-treated with trehalose and saccharose, and then lyophilized and re-hydrated. Prior to lyophilization and after re hydration, RBC parameters, ...

  12. Structural Analysis of Alkaline Pretreated Rice Straw for Ethanol Production

    Directory of Open Access Journals (Sweden)

    Paripok Phitsuwan

    2017-01-01

    Full Text Available Rice straw (RS is an abundant, readily available agricultural waste, which shows promise as a potential feedstock for Asian ethanol production. To enhance release of glucose by enzymatic hydrolysis, RS was pretreated with aqueous ammonia (27% w/w at two pretreatment temperatures: room temperature and 60°C. Statistical analysis indicated similarity of enzymatic glucose production at both pretreatment temperatures after 3-day incubation. Chemical composition, FTIR, and EDX analyses confirmed the retention of glucan and xylan in the pretreated solid, but significant reduction of lignin (60.7% removal and silica. SEM analysis showed the disorganized surfaces and porosity of the pretreated RS fibers, thus improving cellulose accessibility for cellulase. The crystallinity index increased from 40.5 to 52.3%, indicating the higher exposure of cellulose. With 10% (w/v solid loadings of pretreated RS, simultaneous saccharification and fermentation yielded a final ethanol concentration of 24.6 g/L, corresponding to 98% of maximum theoretical yield. Taken together, aqueous ammonia pretreatment is an effective method to generate highly digestible pretreated RS for bioethanol production and demonstrates potential application in biorefinery industry.

  13. Effect of chemical pretreatment of some lignocellulosic wastes on ...

    African Journals Online (AJOL)

    Highest cellulase activity (0.06777 IU/ml/min) was display d by the organism grown on bagasse substrate pretreated with 2M NaOH for one hour. The proximate analysis of the cellulosic residues differed from one substrate to another, with the bagasse being the best. Pulverized substrates syndicated with alkali pretreatment ...

  14. Development of pretreatment of empty fruit bunches for enhanced ...

    African Journals Online (AJOL)

    Heating, boiling and steaming are among the physical agents and different concentrations of nitric acid, sulfuric acid and sodium hydroxide (NaOH) were the chemical agents used for the pretreatment of EFB to enhance the enzymatic saccharification of EFB. NaOH was proved to be the best among all the pretreatment ...

  15. 40 CFR 408.184 - Pretreatment standards for existing sources.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Pretreatment standards for existing sources. 408.184 Section 408.184 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Hand-Butchered Salmon Processing Subcategory § 408.184 Pretreatment standards for existing sources. Any...

  16. 40 CFR 463.15 - Pretreatment standards for existing sources.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Pretreatment standards for existing sources. 463.15 Section 463.15 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Heating Water Subcategory § 463.15 Pretreatment standards for existing sources. (a) PSES for bis(2...

  17. Dentin Pre-Treatment to Suppress Microleakage of Amalgam Restorations

    Directory of Open Access Journals (Sweden)

    Yosi Kusuma Eriwati Arianto

    2015-10-01

    Full Text Available Diminished microleakage of amalgam-to-dentin preparations would benefit large populations in public health facilities. Prior studies demonstrated less microleakage for bonded amalgams than similarly bonded advanced composites among 30 different composite/bonding agent/storage conditions, Haller et al. showed that a combination of formaldehyde pre-treatment and glutaraldehyde-containing Syntac adhesive minimized microleakage. In the current study, CLass V restorations (groups of 10 formaldehyde-treated non carious human molars were filled with Valiant (Ivoclar NA amalgam after application of one of three liners: Copalite varnish; Amalagambond Plus with microfiber; and Syntac/Variolink. The control group used no liner material. After 24 hours at 37°C/100% RH, samples were thermocycled (1000 eyeles in water at 5°C and 60°C (15 second dwell time in each. Samples were immersed in 5% methylene blue solution (4 hrs and observed under a stereomicroscope; interfaces also were examined by SEM. Krsukal Wallis ANOVA by ranks (P<0.01 and Mann Whitney U Tests (P<0.05 of the data indicate improvements (equivalent among the 3 different liners tested here over unlined amalgam preparations. Liner/aldehyde-crosslinked dentin interphases, without technique-sensitive composites, may minimize microleakage by improving amalgam contact (physical bonding.

  18. Vector domain decomposition schemes for parabolic equations

    Science.gov (United States)

    Vabishchevich, P. N.

    2017-09-01

    A new class of domain decomposition schemes for finding approximate solutions of timedependent problems for partial differential equations is proposed and studied. A boundary value problem for a second-order parabolic equation is used as a model problem. The general approach to the construction of domain decomposition schemes is based on partition of unity. Specifically, a vector problem is set up for solving problems in individual subdomains. Stability conditions for vector regionally additive schemes of first- and second-order accuracy are obtained.

  19. Algebraic K-theory of generalized schemes

    DEFF Research Database (Denmark)

    Anevski, Stella Victoria Desiree

    and geometry over the field with one element. It also permits the construction of important Arakelov theoretical objects, such as the completion \\Spec Z of Spec Z. In this thesis, we prove a projective bundle theorem for the eld with one element and compute the Chow rings of the generalized schemes Sp\\ec ZN......Nikolai Durov has developed a generalization of conventional scheme theory in which commutative algebraic monads replace commutative unital rings as the basic algebraic objects. The resulting geometry is expressive enough to encompass conventional scheme theory, tropical algebraic geometry......, appearing in the construction of \\Spec Z....

  20. Galilean invariant resummation schemes of cosmological perturbations

    Science.gov (United States)

    Peloso, Marco; Pietroni, Massimo

    2017-01-01

    Many of the methods proposed so far to go beyond Standard Perturbation Theory break invariance under time-dependent boosts (denoted here as extended Galilean Invariance, or GI). This gives rise to spurious large scale effects which spoil the small scale predictions of these approximation schemes. By using consistency relations we derive fully non-perturbative constraints that GI imposes on correlation functions. We then introduce a method to quantify the amount of GI breaking of a given scheme, and to correct it by properly tailored counterterms. Finally, we formulate resummation schemes which are manifestly GI, discuss their general features, and implement them in the so called Time-Flow, or TRG, equations.

  1. Finite-volume scheme for anisotropic diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Es, Bram van, E-mail: bramiozo@gmail.com [Centrum Wiskunde & Informatica, P.O. Box 94079, 1090GB Amsterdam (Netherlands); FOM Institute DIFFER, Dutch Institute for Fundamental Energy Research, The Netherlands" 1 (Netherlands); Koren, Barry [Eindhoven University of Technology (Netherlands); Blank, Hugo J. de [FOM Institute DIFFER, Dutch Institute for Fundamental Energy Research, The Netherlands" 1 (Netherlands)

    2016-02-01

    In this paper, we apply a special finite-volume scheme, limited to smooth temperature distributions and Cartesian grids, to test the importance of connectivity of the finite volumes. The area of application is nuclear fusion plasma with field line aligned temperature gradients and extreme anisotropy. We apply the scheme to the anisotropic heat-conduction equation, and compare its results with those of existing finite-volume schemes for anisotropic diffusion. Also, we introduce a general model adaptation of the steady diffusion equation for extremely anisotropic diffusion problems with closed field lines.

  2. Cognitive radio networks dynamic resource allocation schemes

    CERN Document Server

    Wang, Shaowei

    2014-01-01

    This SpringerBrief presents a survey of dynamic resource allocation schemes in Cognitive Radio (CR) Systems, focusing on the spectral-efficiency and energy-efficiency in wireless networks. It also introduces a variety of dynamic resource allocation schemes for CR networks and provides a concise introduction of the landscape of CR technology. The author covers in detail the dynamic resource allocation problem for the motivations and challenges in CR systems. The Spectral- and Energy-Efficient resource allocation schemes are comprehensively investigated, including new insights into the trade-off

  3. Graph state-based quantum authentication scheme

    Science.gov (United States)

    Liao, Longxia; Peng, Xiaoqi; Shi, Jinjing; Guo, Ying

    2017-04-01

    Inspired by the special properties of the graph state, a quantum authentication scheme is proposed in this paper, which is implemented with the utilization of the graph state. Two entities, a reliable party, Trent, as a verifier and Alice as prover are included. Trent is responsible for registering Alice in the beginning and confirming Alice in the end. The proposed scheme is simple in structure and convenient to realize in the realistic physical system due to the use of the graph state in a one-way quantum channel. In addition, the security of the scheme is extensively analyzed and accordingly can resist the general individual attack strategies.

  4. Autonomous Droop Scheme With Reduced Generation Cost

    DEFF Research Database (Denmark)

    Nutkani, Inam Ullah; Loh, Poh Chiang; Wang, Peng

    2014-01-01

    . This objective might, however, not suit microgrids well since DGs are usually of different types, unlike synchronous generators. Other factors like cost, efficiency, and emission penalty of each DG at different loading must be considered since they contribute directly to the total generation cost (TGC......) of the microgrid. To reduce this TGC without relying on fast communication links, an autonomous droop scheme is proposed here, whose resulting power sharing is decided by the individual DG generation costs. Comparing it with the traditional scheme, the proposed scheme retains its simplicity and it is hence more...

  5. Effects of thermal pre-treatments on solid slaughterhouse waste methane potential.

    Science.gov (United States)

    Rodríguez-Abalde, A; Fernández, B; Silvestre, G; Flotats, X

    2011-07-01

    The effects of thermal pre-treatments on the biogas production potential of two solid slaughterhouse waste types (poultry and piggery slaughterhouse by-products) were assessed by means of batch experiments. Both animal by-products were characterized in terms of fat, protein and carbohydrate concentrations. The selected thermal pre-treatments, pasteurization (70 °C for 60 min) and sterilization (133 °C and 3 bars for 20 min), are included in the current European regulations for the disposal or use of animal by-products. The pre-treatments produced notable improvements in organic matter solubilization, but had different effects on the anaerobic bioavailability of the treated substrates. The methane yield of the initial volatile solids did not increase significantly after pre-treatment when carbohydrate concentration was high, reaching a maximum of 0.48 m(CH4)(3) kg(VS)(-1) for the pasteurized poultry waste. However, this yield increased by up to 52.7% after pasteurization and 66.1% after sterilization for the lower carbohydrate concentration sample (piggery waste), reaching maxima of 0.88 and 0.96 m(CH4)(3) kg(VS)(-1), respectively. The maximum methane production rates, measured as the maximum slope of the accumulated methane production curve, per unit of initial biomass content, were also different. While this rate increased by 52.6% and 211.6% for piggery waste after pasteurization and sterilization, respectively, it decreased by 43.8% for poultry waste after pasteurization with respect to untreated waste. Compounds with low biodegradability that are produced by Maillard reactions during thermal pre-treatment could explain the low bioavailability observed for waste with a high carbohydrate concentration. Copyright © 2011 Elsevier Ltd. All rights reserved.

  6. Electrohydrolysis pretreatment of water hyacinth for enhanced hydrolysis.

    Science.gov (United States)

    Barua, Visva Bharati; Raju, V Wilson; Lippold, Sophia; Kalamdhad, Ajay S

    2017-08-01

    This study investigates the use of electrohydrolysis pretreatment on water hyacinth to cut short the hydrolysis step and increase biogas production at the same time. Electrohydrolysis pretreatment of water hyacinth at 20V for 60min exhibited improved solubilisation (42.9%). Therefore, bio-chemical methane potential (BMP) test was carried out between water hyacinth pretreated at 20V for 60min and untreated water hyacinth. By the end of 30days, cumulative methane production of 2455±17mL CH4/g VS for electrohydrolysis pretreated substrate and 1936±27mL CH4/g VS for the untreated substrate was achieved. Compositional analysis and characterization study revealed the efficiency of electrohydrolysis pretreatment in melting the lignin and lowering the cellulose crystallinity of water hyacinth. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Bioethanol from lignocellulose - pretreatment, enzyme immobilization and hydrolysis kinetics

    DEFF Research Database (Denmark)

    Tsai, Chien Tai

    , the cost of enzyme is still the bottle neck, re-using the enzyme is apossible way to reduce the input of enzyme in the process. In the point view of engineering, the prediction of enzymatic hydrolysis kinetics under different substrate loading, enzyme combination is usful for process design. Therefore....... Ionic liquid had been reported to be able to dissolve lignocellulose. However, as our knowledge, in all published researches, the concentration of lignocellulose in ionic liquid were low (5~10%). Besides, pretreatment time were long (from 1 hr to 1 day). Based on the hypothesis that the amount of ionic...... liquid and pretreatment time can be reduced, the influence of substrate concentration, pretreatment time and temperature were investigated and optimized. Pretreatment of barley straw by [EMIM]Ac, correlative models were constructed using 3 different pretreatment parameters (temperature, time...

  8. Dielectric barrier discharge plasma pretreatment on hydrolysis of microcrystalline cellulose

    Science.gov (United States)

    Huang, Fangmin; Long, Zhouyang; Liu, Sa; Qin, Zhenglong

    2017-04-01

    Dielectric barrier discharge (DBD) plasma was used as a pretreatment method for downstream hydrolysis of microcrystalline cellulose (MCC). The degree of polymerization (DP) of MCC decreased after it was pretreated by DBD plasma under a carrier gas of air/argon. The effectiveness of depolymerization was found to be influenced by the crystallinity of MCC when under the pretreatment of DBD plasma. With the addition of tert-butyl alcohol in the treated MCC water suspension solution, depolymerization effectiveness of MCC was inhibited. When MCC was pretreated by DBD plasma for 30 min, the total reducing sugar concentration (TRSC) and liquefaction yield (LY) of pretreated-MCC (PMCC) increased by 82.98% and 34.18% respectively compared with those for raw MCC.

  9. Ethanol production in a simultaneous saccharification and fermentation process with interconnected reactors employing hydrodynamic cavitation-pretreated sugarcane bagasse as raw material.

    Science.gov (United States)

    Terán Hilares, Ruly; Ienny, João Vitor; Marcelino, Paulo Franco; Ahmed, Muhammad Ajaz; Antunes, Felipe A F; da Silva, Silvio Silvério; Santos, Júlio César Dos

    2017-11-01

    In this study, sugarcane bagasse (SCB) pretreated with alkali assisted hydrodynamic cavitation (HC) was investigated for simultaneous saccharification and fermentation (SSF) process for bioethanol production in interconnected column reactors using immobilized Scheffersomyces stipitis NRRL-Y7124. Initially, HC was employed for the evaluation of the reagent used in alkaline pretreatment. Alkalis (NaOH, KOH, Na 2 CO 3 , Ca(OH) 2 ) and NaOH recycled black liquor (successive batches) were used and their pretreatment effectiveness was assessed considering the solid composition and its enzymatic digestibility. In SSF process using NaOH-HC pretreatment SCB, 62.33% of total carbohydrate fractions were hydrolyzed and 17.26g/L of ethanol production (0.48g of ethanol/g of glucose and xylose consumed) was achieved. This proposed scheme of HC-assisted NaOH pretreatment together with our interconnected column reactors showed to be an interesting new approach for biorefineries. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Password authentication scheme based on the quadratic residue problem

    Science.gov (United States)

    Ali, Muhammad Helmi; Ismail, Eddie Shahril

    2017-04-01

    In this paper, we propose a new password-authentication scheme based on quadratic residue problem with the following advantages: the scheme does not require a verification file, and the scheme can withstand replay attacks and resist from the guessing and impersonation attacks. We next discuss the advantages of our designated scheme over other schemes in terms of security and efficiency.

  11. A survey of Strong Convergent Schemes for the Simulation of ...

    African Journals Online (AJOL)

    We considered strong convergent stochastic schemes for the simulation of stochastic differential equations. The stochastic Taylor's expansion, which is the main tool used for the derivation of strong convergent schemes; the Euler Maruyama, Milstein scheme, stochastic multistep schemes, Implicit and Explicit schemes were ...

  12. Marmoset induced pluripotent stem cells: Robust neural differentiation following pretreatment with dimethyl sulfoxide

    Directory of Open Access Journals (Sweden)

    Zhifang Qiu

    2015-07-01

    Full Text Available The marmoset is an important nonhuman primate model for regenerative medicine. For experimental autologous cell therapy based on induced pluripotent (iPS cells in the marmoset, cells must be able to undergo robust and reliable directed differentiation that will not require customization for each specific iPS cell clone. When marmoset iPS cells were aggregated in a hanging drop format for 3 days, followed by exposure to dual SMAD inhibitors and retinoic acid in monolayer culture for 3 days, we found substantial variability in the response of different iPS cell clones. However, when clones were pretreated with 0.05–2% dimethyl sulfoxide (DMSO for 24 hours, all clones showed a very similar maximal response to the directed differentiation scheme. Peak responses were observed at 0.5% DMSO in two clones and at 1% DMSO in a third clone. When patterns of gene expression were examined by microarray analysis, hierarchical clustering showed very similar responses in all 3 clones when they were pretreated with optimal DMSO concentrations. The change in phenotype following exposure to DMSO and the 6 day hanging drop/monolayer treatment was confirmed by immunocytochemistry. Analysis of DNA content in DMSO-exposed cells indicated that it is unlikely that DMSO acts by causing cells to exit from the cell cycle. This approach should be generally valuable in the directed neural differentiation of pluripotent cells for experimental cell therapy.

  13. A Climate Classification Scheme for Habitable Worlds

    Science.gov (United States)

    Byrne, J. F.

    2017-11-01

    This presentation will include an exploration of the internal/external forcings and variability associated with climate using Earth as a reference model in addition to a classification scheme consisting of five categories.

  14. Secure Wake-Up Scheme for WBANs

    Science.gov (United States)

    Liu, Jing-Wei; Ameen, Moshaddique Al; Kwak, Kyung-Sup

    Network life time and hence device life time is one of the fundamental metrics in wireless body area networks (WBAN). To prolong it, especially those of implanted sensors, each node must conserve its energy as much as possible. While a variety of wake-up/sleep mechanisms have been proposed, the wake-up radio potentially serves as a vehicle to introduce vulnerabilities and attacks to WBAN, eventually resulting in its malfunctions. In this paper, we propose a novel secure wake-up scheme, in which a wake-up authentication code (WAC) is employed to ensure that a BAN Node (BN) is woken up by the correct BAN Network Controller (BNC) rather than unintended users or malicious attackers. The scheme is thus particularly implemented by a two-radio architecture. We show that our scheme provides higher security while consuming less energy than the existing schemes.

  15. Enhancement of bio-oil production via pyrolysis of wood biomass by pretreatment with H2SO4.

    Science.gov (United States)

    Kumagai, Shogo; Matsuno, Ryo; Grause, Guido; Kameda, Tomohito; Yoshioka, Toshiaki

    2015-02-01

    In this work, a Japanese cedar wood sample was treated during the first step at ambient temperature and atmospheric pressure using several concentrations of sulfuric acid (H2SO4) in a stirred flask. During this pretreatment C-O bonds of cellulose, hemicellulose, and lignin were cleaved. The second step involved the pyrolysis of the pretreated wood sample at 550 °C in a quartz glass tube reactor. A maximum oil yield of 46.8 wt% with the minimum char yield of 10.1 wt% was obtained by the treatment with 3 M H2SO4, whereas untreated wood samples resulted in a 30.1 wt% yield of oil. The main components in the oils were levoglucosan and tar. These results suggest that moderate acid pretreatment produced shorter chain units of cellulose, hemicellulose, and lignin, thereby facilitating the conversion into oil by pyrolysis. The results of thermogravimetry-mass spectroscopy supported the presence of shorter chain units in the pretreated wood samples. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Chemical characteristics and methane potentials of source-separated and pre-treated organic municipal solid waste

    DEFF Research Database (Denmark)

    Hansen, Trine Lund; Svärd, Å; Angelidaki, Irini

    2003-01-01

    A research project has investigated the biogas potential of pre-screened source-separated organic waste. Wastes from five Danish cities have been pre-treated by three methods: screw press; disc screen; and shredder and magnet. This paper outlines the sampling procedure used, the chemical...... composition of the wastes and the estimated methane potentials....

  17. Renormalization scheme dependence with renormalization group summation

    Science.gov (United States)

    McKeon, D. G. C.

    2015-08-01

    We consider all perturbative radiative corrections to the total e+e- annihilation cross section Re+e- showing how the renormalization group (RG) equation associated with the radiatively induced mass scale μ can be used to sum the logarithmic contributions in two ways. First of all, one can sum leading-log, next-to-leading-log, etc., contributions to Re+e- using in turn the one-loop, two-loop, etc., contributions to the RG function β . A second summation shows how all logarithmic corrections to Re+e- can be expressed entirely in terms of the log-independent contributions when one employs the full β -function. Next, using Stevenson's characterization of any choice of renormalization scheme by the use of the contributions to the β -function arising beyond two-loop order, we examine the RG scheme dependence in Re+e- when using the second way of summing logarithms. The renormalization scheme invariants that arise are then related to the renormalization scheme invariants found by Stevenson. We next consider two choices of the renormalization scheme, one which can be used to express Re+e- solely in terms of two powers of a running coupling, and the second which can be used to express Re+e- as an infinite series in the two-loop running coupling (i.e., a Lambert W -function). In both cases, Re+e- is expressed solely in terms of renormalization scheme invariant parameters that are to be computed by a perturbative evaluation of Re+e-. We then establish how in general the coupling constant arising in one renormalization scheme can be expressed as a power series of the coupling arising in any other scheme. We then establish how, by using a different renormalization mass scale at each order of perturbation theory, all renormalization scheme dependence can be absorbed into these mass scales when one uses the second way of summing logarithmic corrections to Re+e-. We then employ the approach to renormalization scheme dependency that we have applied to Re+e- to a RG summed

  18. Asynchronous Communication Scheme For Hypercube Computer

    Science.gov (United States)

    Madan, Herb S.

    1988-01-01

    Scheme devised for asynchronous-message communication system for Mark III hypercube concurrent-processor network. Network consists of up to 1,024 processing elements connected electrically as though were at corners of 10-dimensional cube. Each node contains two Motorola 68020 processors along with Motorola 68881 floating-point processor utilizing up to 4 megabytes of shared dynamic random-access memory. Scheme intended to support applications requiring passage of both polled or solicited and unsolicited messages.

  19. Navigators’ Behavior in Traffic Separation Schemes

    Directory of Open Access Journals (Sweden)

    Zbigniew Pietrzykowski

    2015-03-01

    Full Text Available One of the areas of decision support in the navigational ship conduct process is a Traffic Separation Scheme. TSSs are established in areas with high traffic density, often near the shore and in port approaches. The main purpose of these schemes is to improve maritime safety by channeling vessel traffic into streams. Traffic regulations as well as ships behavior in real conditions in chosen TSSs have been analyzed in order to develop decision support algorithms.

  20. Dynamic Restarting Schemes for Eigenvalue Problems

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Kesheng; Simon, Horst D.

    1999-03-10

    In studies of restarted Davidson method, a dynamic thick-restart scheme was found to be excellent in improving the overall effectiveness of the eigen value method. This paper extends the study of the dynamic thick-restart scheme to the Lanczos method for symmetric eigen value problems and systematically explore a range of heuristics and strategies. We conduct a series of numerical tests to determine their relative strength and weakness on a class of electronic structure calculation problems.

  1. Designing quantum-dot cellular automata circuits using a robust one layer crossover scheme

    Directory of Open Access Journals (Sweden)

    Sara Hashemi

    2014-04-01

    Full Text Available Quantum-dot cellular automata (QCA is a novel nanotechnology which is considered as a solution to the scaling problems in complementary metal oxide semiconductor technology. In this Letter, a robust one layer crossover scheme is introduced. It uses only 90° QCA cells and works based on a proper clock assignment. The application of this new scheme is shown in designing a sample QCA circuit. Simulation results demonstrate that using this new scheme, significant improvements in terms of area and complexity can be achieved.

  2. Effect of different pretreatment procedures on the particle size distribution results

    Science.gov (United States)

    Zacháry, Dóra; Szabó, Judit; Jakab, Gergely; Pál, Tamás; Kiss, Klaudia; Kovács, József; Szalai, Zoltán

    2017-04-01

    For soil particle size distribution (PSD) laser diffraction is a widely used and fast method. Although the data results are input data for further measurements and modeling applications, there are just few papers highlighting the effect of the pretreatment techniques on the PSD results. According to the different standards there are distinct sample preparation procedures for laser diffraction, which contain chemical (using sodium hexametaphosphate, anhydrous calcium carbonate or hydrogen peroxide) and physical (using ultrasounds) dispersion techniques to remove the cementing agents and break down the aggregates. To measure the effect of the sample preparation on PSD results 8 soil layer samples from typical Hungarian soil horizons were studied. We applied the most commonly used international (Buurman et al. 1996; Van Reeuwijk 2002; Burt 2004) and national (Hungarian Standard, MSZ-08 0205-78 1978) sample preparation procedures with and without modifications, therefore 8 distinct sample preparation series were carried out for each soils. The role of soil organic matter (SOM) content in the aggregate formation was analyezed on humic Arenosol sample. To measure the effect of carbonate as a cementing agent Loess and calcaric Arenosol sample was analysed. The effect of small particles as binder material was investigated by using Luvisol Clay and Red Clay samples. Solonetz, Chernozem, and 'Erubáz'(a shallow soil type influenced by high SOM content and the volcanic parent rock) were used to represent the interaction effects of at least two binders. The pretreated soils were analyzed by the Horiba Partica LA-950 Analyser. The applied refractive indexes differ from each other (real part: 1.55-1.60; imaginary part: 0.10-0.50) according to the soil type and the pretreatment procedure. The dispersion medium was distilled water in all cases. Hierarchical cluster analysis was applied to classify the measured PSD results. Results show that sample preparation is very important

  3. Sequential high gravity ethanol fermentation and anaerobic digestion of steam explosion and organosolv pretreated corn stover.

    Science.gov (United States)

    Katsimpouras, Constantinos; Zacharopoulou, Maria; Matsakas, Leonidas; Rova, Ulrika; Christakopoulos, Paul; Topakas, Evangelos

    2017-11-01

    The present work investigates the suitability of pretreated corn stover (CS) to serve as feedstock for high gravity (HG) ethanol production at solids-content of 24wt%. Steam explosion, with and without the addition of H 2 SO 4 , and organosolv pretreated CS samples underwent a liquefaction/saccharification step followed by simultaneous saccharification and fermentation (SSF). Maximum ethanol concentration of ca. 76g/L (78.3% ethanol yield) was obtained from steam exploded CS (SECS) with 0.2% H 2 SO 4 . Organosolv pretreated CS (OCS) also resulted in high ethanol concentration of ca. 65g/L (62.3% ethanol yield). Moreover, methane production through anaerobic digestion (AD) was conducted from fermentation residues and resulted in maximum methane yields of ca. 120 and 69mL/g volatile solids (VS) for SECS and OCS samples, respectively. The results indicated that the implementation of a liquefaction/saccharification step before SSF employing a liquefaction reactor seemed to handle HG conditions adequately. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. TiO2-Based Photocatalytic Treatment of Raw and Constructed-Wetland Pretreated Textile Wastewater

    Directory of Open Access Journals (Sweden)

    Dunja Mahne

    2012-01-01

    Full Text Available Approximately, 15% of the total textile colorant production is estimated to be lost during dyeing and processing of textile fibres. If left untreated, these wastewaters can represent a serious environmental threat. In the present paper a combination of photocatalytic and biological degradation of prepared textile wastewaters (simulation of real textile effluent is presented. Samples have been monitored through the course of photocatalytic experiments: change in UV-VIS absorbance spectra and complete decolouration were achieved for all three tested dyed wastewaters; however, only partial COD removal was achieved with photocatalytic oxidation (PCOx and photocatalytic ozonation (PCOz. Toxicity test (Vibrio fischeri of untreated and pretreated (constructed wetland, CW samples showed a decrease in toxicity values only for the red-dyed wastewater. Comparison of efficiency of PCOx and PCOz for decolouration and mineralization of three structurally different dyes (anthraquinone and two azo dyes has been done. CW pretreatment caused faster decolouration and substantial COD removal in PCOx (up to 45%. Pretreatment also accelerated decolouration during PCOz, but it accelerated COD removal only in the case of red-dyed wastewater due to short irradiation times applied.

  5. OPTIMIZATION OF PRETREATMENT CONDITIONS OF CARROTS TO MAXIMIZE JUICE RECOVERY BY RESPONSE SURFACE METHODOLOGY

    Directory of Open Access Journals (Sweden)

    H. K. SHARMA

    2006-12-01

    Full Text Available Carrot juice was expressed in a hydraulic press using a wooden set up. Carrot samples pretreated at different designed combinations, using Central Composite Rotatable Design (CCRD, Response Surface Methodology (RSM, of pH, temperature and time were expressed and juice so obtained was characterized for various physico-chemical parameters which involved yield, TSS and water content, reducing sugars, total sugars and color (absorbance. The study indicated that carrots exposed to the different pretreatment conditions resulted in increased amount of yield than that of the control. The responses were optimized by numerical method and were found to be 78.23% yield, 0.93% color (abs, 3.41% reducing sugars, 5.53% total sugars, 6.69obrix, and 90.50% water content. All the derived mathematical models for the various responses were found to be fit significantly to predict the data.

  6. Dilute alkali pretreatment of softwood pine: A biorefinery approach.

    Science.gov (United States)

    Safari, Ali; Karimi, Keikhosro; Shafiei, Marzieh

    2017-06-01

    Dilute alkali pretreatment was performed on softwood pine to maximize ethanol and biogas production via a biorefinery approach. Alkali pretreatments were performed with 0-2% w/v NaOH at 100-180°C for 1-5h. The liquid fraction of the pretreated substrates was subjected to anaerobic digestion. The solid fraction of the pretreatment was used for separate enzymatic hydrolysis and fermentation. High ethanol yields of 76.9‒78.0% were achieved by pretreatment with 2% (w/v) NaOH at 180°C. The highest biogas yield of 244mL/g volatile solid (at 25°C, 1bar) was achieved by the pretreatment with 1% (w/v) NaOH at 180°C. The highest gasoline equivalent (sum of ethanol and methane) of 197L per ton of pinewood and the lowest ethanol manufacturing cost of 0.75€/L was obtained after pretreatment with 1% NaOH at 180°C for 5h. The manufacturing cost of ethanol from untreated wood was 4.12€/L. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Understanding the impact of ionic liquid pretreatment on eucalyptus

    Energy Technology Data Exchange (ETDEWEB)

    Centikol, Ozgul [Joint Bioenergy Institute; Dibble, Dean [Joint Bioenergy Institute; Cheng, Gang [Joint Bioenergy Institute; Kent, Michael S [ORNL; Knierim, Manfred [Joint Bioenergy Institute; Melnichenko, Yuri B [ORNL

    2010-01-01

    The development of cost-competitive biofuels necessitates the realization of advanced biomass pretreatment technologies. Ionic liquids provide a basis for one of the most promising pretreatment technologies and are known to allow effective processing of cellulose and some biomass species. Here, we demonstrate that the ionic liquid 1-ethyl-3-methyl imidazolium acetate, [C2mim][OAc], induces structural changes at the molecular level in the cell wall of Eucalyptus globulus. Deacetylation of xylan, acetylation of the lignin units, selective removal of guaiacyl units (increasing the syringyl:guaiacyl ratio) and decreased {beta}-ether content were the most prominent changes observed. Scanning electron microscopy images of the plant cell wall sections reveal extensive swelling during [C2mim][OAc] pretreatment. X-ray diffraction measurements indicate a change in cellulose crystal structure from cellulose I to cellulose II after [C2mim][OAc] pretreatment. Enzymatic saccharification of the pretreated material produced increased sugar yields and improved hydrolysis kinetics after [C2mim][OAc] pretreatment. These results provide new insight into the mechanism of ionic liquid pretreatment and reaffirm that this approach may be promising for the production of cellulosic biofuels from woody biomass.

  8. Effects of Pretreatment Methods on Electrodes and SOFC Performance

    Directory of Open Access Journals (Sweden)

    Guo-Bin Jung

    2014-06-01

    Full Text Available Commercially available tapes (anode, electrolyte and paste (cathode were choosen to prepare anode-supported cells for solid oxide fuel cell applications. For both anode-supported cells or electrolyte-supported cells, the anode needs pretreatment to reduce NiO/YSZ to Ni/YSZ to increase its conductivity as well as its catalytic characteristics. In this study, the effects of different pretreatments (open-circuit, closed-circuit on cathode and anodes as well as SOFC performance are investigated. To investigate the influence of closed-circuit pretreatment on the NiO/YSZ anode alone, a Pt cathode is utilized as reference for comparison with the LSM cathode. The characterization of the electrical resistance, AC impedance, and SOFC performance of the resulting electrodes and/or anode-supported cell were carried out. It’s found that the influence of open-circuit pretreatment on the LSM cathode is limited. However, the influence of closed-circuit pretreatment on both the LSM cathode and NiO/YSZ anode and the resulting SOFC performance is profound. The effect of closed-circuit pretreatment on the NiO/YSZ anode is attributed to its change of electronic/pore structure as well as catalytic characteristics. With closed-circuit pretreatment, the SOFC performance improved greatly from the change of LSM cathode (and Pt reference compared to the Ni/YSZ anode.

  9. Enhanced enzymatic conversion with freeze pretreatment of rice straw

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Ken-Lin; Thitikorn-amorn, Jitladda; Ou, Bay-Ming; Chen, Shan-He; Huang, Po-Jung [Institute of Biological Chemistry and Genomics Research Center Academia Sinica, Nankang, Taipei 115 (China); Hsieh, Jung-Feng [Department of Food Science, Fu Jen Catholic University, Xin Zhuang, Taipei 242 (China); Ratanakhanokchai, Khanok [School of Bioresources and Technology, King Mongkut' s University of Technology Thonburi, Bangkok 10150 (Thailand); Chen, Shui-Tein [Institute of Biological Chemistry and Genomics Research Center Academia Sinica, Nankang, Taipei 115 (China); Institute of Biochemical Sciences, College of Life Science, National Taiwan University, Taipei 106 (China)

    2011-01-15

    Production of bioethanol by the conversion of lignocellulosic waste has attracted much interest in recent years, because of its low cost and great potential availability. The pretreatment process is important for increasing the enzymatic digestibility of lignocellulosic materials. Enzymatic conversion with freeze pretreatment of rice straw was evaluated in this study. The freeze pretreatment was found to significantly increase the enzyme digestibility of rice straw from 48% to 84%. According to the results, enzymatic hydrolysis of unpretreated rice straw with 150 U cellulase and 100 U xylanase for 48 h yielded 226.77 g kg{sup -1} and 93.84 g kg{sup -1} substrate-reducing sugars respectively. However, the reducing sugar yields from freeze pretreatment under the same conditions were 417.27 g kg{sup -1} and 138.77 g kg{sup -1} substrate, respectively. In addition, hydrolyzates analysis showed that the highest glucose yield obtained during the enzymatic hydrolysis step in the present study was 371.91 g kg{sup -1} of dry rice straw, following pretreatment. Therefore, the enhanced enzymatic conversion with freeze pretreatment of rice straw was observed in this study. This indicated that freeze pretreatment was highly effective for enzymatic hydrolysis and low environmental impact. (author)

  10. Breakdown of hierarchical architecture in cellulose during dilute acid pretreatments

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yan [Northeastern Univ., Boston, MA (United States); Inouye, Hideyo [Northeastern Univ., Boston, MA (United States); Yang, Lin [Brookhaven National Lab. (BNL), Upton, NY (United States); Himmel, Michael E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tucker, Melvin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Makowski, Lee [Northeastern Univ., Boston, MA (United States)

    2015-02-28

    Cellulose can work as a feedstock for sustainable bioenergy because of its global abundance. Pretreatment of biomass has significant influence on the chemical availability of cellulose locked in recalcitrant microfibrils. Optimizing pretreatment depends on an understanding of its impact on the microscale and nanoscale molecular architecture. X-ray scattering experiments have been performed on native and pre-treated maize stover and models of cellulose architecture have been derived from these data. Ultra small-angle, very small-angle and small-angle X-ray scattering (USAXS, VSAXS and SAXS) probe three different levels of architectural scale. USAXS and SAXS have been used to study cellulose at two distinct length scales, modeling the fibrils as ~30 Å diameter rods packed into ~0.14 μm diameter bundles. VSAXS is sensitive to structural features at length scales between these two extremes. Detailed analysis of diffraction patterns from untreated and pretreated maize using cylindrical Guinier plots and the derivatives of these plots reveals the presence of substructures within the ~0.14 μm diameter bundles that correspond to grouping of cellulose approximately 30 nm in diameter. These sub-structures are resilient to dilute acid pretreatments but are sensitive to pretreatment when iron sulfate is added. Our results provide evidence of the hierarchical arrangement of cellulose at three length scales and the evolution of these arrangements during pre-treatments.

  11. HYDROLYSIS OF AGRICULTURAL BIOMASS BY COMBINED PRETREATMENT AND ENZYMATIC METHODS IN ORDER TO PRODUCE BIOFUELS (ETHANOL, BIOGAS

    Directory of Open Access Journals (Sweden)

    STEFANA JURCOANE

    2009-05-01

    Full Text Available The use of energy crops (maize straw, wheat straw, barley straw etc. as substratefor renewable energy production (e.g. biogas is more efficient when it is degradedby different hydrolysis methods. However, fibers contained inside energy crops (e.g.cellulose and hemicellulose are only hardly and slowly degraded by anaerobicbacteria. The slow degradation of these substances can decrease the methane yieldsof agricultural biogas plants.In the present study, we investigated the efficiency ofcombined pretreatment (different concentrations H2SO4 + 30 minutes at 1210Cfollowed to enzymatic hydrolysis. Testing different concentration of H2SO4, goodresults were obtained for maize whole crop when we used combined pretreatment(3% H2SO4 + 30 minutes at 1210C followed to enzymatic hydrolysis (3.9 foldhigher and for Gavott Maize Straw when we used combined pretreatment (2%H2SO4 + 30 minutes at 1210C followed to enzymatic hydrolysis (3.6 fold highercomparing with untreated samples.

  12. Physicochemical quality of eggplant dehydrated with varied pretreatments - doi: 10.4025/actascitechnol.v35i1.10551

    Directory of Open Access Journals (Sweden)

    Rafael Chavez Osidacz

    2013-01-01

    Full Text Available Among the main advantages of dehydrated fruit and vegetables are the great reduction of weight and volume, the ease of transport and storage, not requiring refrigeration, and a longer shelf-life compared with fresh products. This study analyzed the effect of bleaching and osmotic dehydration on the drying of eggplant slices, considering the quality parameters pH, titratable acidity, soluble solids, and shrinkage by image analysis. The pretreatments consisted of: (I osmotic dehydration in 10% NaCl aqueous solution for 20 minutes at 35ºC; (II bleaching of eggplant slices for 5 minutes followed by osmotic dehydration above cited. The pretreated eggplants were subjected to drying (70ºC, along with fresh eggplants, for further comparison. The results showed that the pretreated eggplants (bleached and osmotically dehydrated or osmotically dehydrated have dried more rapidly than the control sample.

  13. Effect of various types of thermal pretreatment techniques on the hydrolysis, compositional analysis and characterization of water hyacinth.

    Science.gov (United States)

    Barua, Visva Bharati; Kalamdhad, Ajay S

    2017-03-01

    The aim of this work was to study the effect of four different types of thermal pretreatment techniques i.e., hot air oven, microwave, autoclave and hot water bath on the hydrolysis, compositional analysis and characterization of water hyacinth. To determine the most efficient thermal pretreatment technique exhibiting enhanced solubilisation. Highest solubilisation was achieved by hot air oven (55.5%), followed by microwave, hot water bath and autoclave. Bio-chemical methane potential (BMP) test of hot air oven pretreated and untreated water hyacinth was conducted. Cumulative methane production of 3039±32mLCH4/gVS was achieved by hot air oven pretreated water hyacinth at 90°C for 1h which was way higher than the cumulative methane production of untreated water hyacinth 2396±19mLCH4/gVS on the 35th day. Compositional analysis and characterization of water hyacinth were also investigated to study the changes in the pretreated samples. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Sampling strategies for efficient estimation of tree foliage biomass

    Science.gov (United States)

    Hailemariam Temesgen; Vicente Monleon; Aaron Weiskittel; Duncan Wilson

    2011-01-01

    Conifer crowns can be highly variable both within and between trees, particularly with respect to foliage biomass and leaf area. A variety of sampling schemes have been used to estimate biomass and leaf area at the individual tree and stand scales. Rarely has the effectiveness of these sampling schemes been compared across stands or even across species. In addition,...

  15. Evaluation of wet oxidation pretreatment for enzymatic hydrolysis of softwood

    DEFF Research Database (Denmark)

    Palonen, H.; Thomsen, A.B.; Tenkanen, M.

    2004-01-01

    The wet oxidation pretreatment (water, oxygen, elevated temperature, and pressure) of softwood (Picea abies) was investigated for enhancing enzymatic hydrolysis. The pretreatment was preliminarily optimized. Six different combinations of reaction time, temperature, and pH were applied......, and the compositions of solid and liquid fractions were analyzed. The solid fraction after wet oxidation contained 58-64% cellulose, 2-16% hemicellulose, and 24-30% lignin. The pretreatment series gave information about the roles of lignin and hemicellulose in the enzymatic hydrolysis. The temperature...

  16. PROJECT W-551 INTERIM PRETREATMENT SYSTEM PRECONCEPTUAL CANDIDATE TECHNOLOGY DESCRIPTIONS

    Energy Technology Data Exchange (ETDEWEB)

    MAY TH

    2008-08-12

    The Office of River Protection (ORP) has authorized a study to recommend and select options for interim pretreatment of tank waste and support Waste Treatment Plant (WTP) low activity waste (LAW) operations prior to startup of all the WTP facilities. The Interim Pretreatment System (IPS) is to be a moderately sized system which separates entrained solids and 137Cs from tank waste for an interim time period while WTP high level waste vitrification and pretreatment facilities are completed. This study's objective is to prepare pre-conceptual technology descriptions that expand the technical detail for selected solid and cesium separation technologies. This revision includes information on additional feed tanks.

  17. Combining image-processing and image compression schemes

    Science.gov (United States)

    Greenspan, H.; Lee, M.-C.

    1995-01-01

    An investigation into the combining of image-processing schemes, specifically an image enhancement scheme, with existing compression schemes is discussed. Results are presented on the pyramid coding scheme, the subband coding scheme, and progressive transmission. Encouraging results are demonstrated for the combination of image enhancement and pyramid image coding schemes, especially at low bit rates. Adding the enhancement scheme to progressive image transmission allows enhanced visual perception at low resolutions. In addition, further progressing of the transmitted images, such as edge detection schemes, can gain from the added image resolution via the enhancement.

  18. Hexafluorozirconic Acid Based Surface Pretreatments: Characterization and Performance Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Adhikari, Saikat [Ohio State University; Unocic, Kinga A [ORNL; Zhai, Yumei [Ohio State University; Frankel, Gerald [Ohio State University; Zimmerman, John [Henkel Corp; Fristad, W [Henkel Corp

    2010-01-01

    A new phosphate-free pretreatment from Henkel Corp. named TecTalis , was investigated. The treatment bath is composed of dilute hexafluorozirconic acid with small quantities of non-hazardous components containing Si and Cu. The performance of treated steel was compared to samples treated in a phosphate conversion coating bath, in simple hexafluorozirconic acid and in TecTalis without the addition of the Cu containing component. Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM) were used to characterize the coating surface morphology, structure and composition. A Quartz Crystal Microbalance (QCM) was used for studying film growth kinetics on thin films of pure Fe, Al and Zn. Electrochemical Impedance Spectroscopy (EIS) was performed on treated and painted steel for studying long-term corrosion performance of the coatings. The phosphate-free coating provided long-term corrosion performance comparable to that of phosphate conversion coatings. The coatings uniformly cover the surface in the form of 10-20 nm sized nodules and clusters of these features up to 500 nm in size. The coatings are usually about 20-30 nm thick and are mostly composed of Zr and O with enrichment of copper at randomly distributed locations and clusters.

  19. Pretreatment of cellulosic wastes to increase enzyme reactivity

    Energy Technology Data Exchange (ETDEWEB)

    Neese, N.; Wallick, J.; Harper, J.M.

    1977-03-01

    The enzymatic hydrolysis of cellulose to glucose is generally a slow reaction. Different pretreatments, such as ball milling to a -200 mesh or swelling in 1 to 2 percent NaOH are reported to increase the reactivity considerably. In this work a fiber fraction from cattle manure was treated in an autoclave for 5 to 30 min at temperatures ranging from 130 to 200/sup 0/C. The reactivity of the cellulose, measured by incubating samples with a commercial cellulase preparation for one hour at 50/sup 0/C and pH 4.8, was increased by a factor of 4 to 6 compared to NaOH treatment and 10 to 20 compared to untreated fiber. The increased reaction rate is probably mostly due to an increase in cellulose availability to enzymatic attack, as structural hemicellulose is hydrolyzed and removed during the treatment. Sugars, produced by hemicellulosis hydrolysis, will react further to give caramelization products. These side reactions were shown to be suppressed by short treatment times. The treated fiber could support growth of a mixed culture of Trichoderma viride and Candida utilis only after washing, indicating the formation of water soluble inhibitory products during treatment. The treatment with high-temperature steam can probably be used also with other cellulosic materials to increase reactivity. This may be an attractive way to prepare low-valued wastes such as manure fibers, straw, stalks, or corn cobs for fermentation processes to increase the protein content or for use directly as ruminant animal feed.

  20. Acrylamide generation in pre-treated potato chips

    DEFF Research Database (Denmark)

    Pedreschi, Franco; Kaack, Karl; Granby, Kit

    2008-01-01

    Acrylamide formation in potato slices fried at two different temperatures ( 170 and 190 degrees C) was investigated under different pre-processing conditions. Potato slices (Saturna variety, diameter: 37 mm, width: 2.2 mm) were either fried at 170 degrees C per 5 min or 190 degrees C per 3.5 min....... Acrylamide content in potato chips was determined after frying at 170 or 190 degrees C. Frying at 190 degrees C increased by almost 130 percent the acrylamide content of all the pre-treated samples ( average value) fried at 170 degrees C. Soaking of blanched potato slices in the 3 g/100 g of NaCl solution...... per 5 min at 25 degrees C, reduces acrylamide formation in potato chips by 11 percent after frying at 170 degrees C. However when the slices are blanched directly in the 3 g/100g of NaCl solution at 60 degrees C for 30 min, their acrylamide formation increased surprisingly by similar to 90 percent...

  1. Confirming theoretical pay constructs of a variable pay scheme

    Directory of Open Access Journals (Sweden)

    Sibangilizwe Ncube

    2013-01-01

    Full Text Available Orientation: Return on the investment in variable pay programmes remains controversial because their cost versus contribution cannot be empirically justified. Research purpose: This study validates the findings of the model developed by De Swardt on the factors related to successful variable pay programmes.Motivation for the study: Many organisations blindly implement variable pay programmes without any means to assess the impact these programmes have on the company’s performance. This study was necessary to validate the findings of an existing instrument that validates the contribution of variable pay schemes.Research design, approach and method: The study was conducted using quantitative research. A total of 300 completed questionnaires from a non-purposive sample of 3000 participants in schemes across all South African industries were returned and analysed.Main findings: Using exploratory and confirmatory factor analysis, it was found that the validation instrument developed by De Swardt is still largely valid in evaluating variable pay schemes. The differences between the study and the model were reported.Practical/managerial implications: The study confirmed the robustness of an existing model that enables practitioners to empirically validate the use of variable pay plans. This model assists in the design and implementation of variable pay programmes that meet critical success factors.Contribution/value-add: The study contributed to the development of a measurement instrument that will assess whether a variable pay plan contributes to an organisation’s success.

  2. Combination of biological pretreatment with mild acid pretreatment for enzymatic hydrolysis and ethanol production from water hyacinth.

    Science.gov (United States)

    Ma, Fuying; Yang, Na; Xu, Chunyan; Yu, Hongbo; Wu, Jianguo; Zhang, Xiaoyu

    2010-12-01

    The mild acid pretreatment and the combination of biological pretreatment by a white rot fungus Echinodontium taxodii or a brown rot fungus Antrodia sp. 5898 with mild acid pretreatment were evaluated under different pretreatment conditions for enzymatic hydrolysis and ethanol production from water hyacinth. The combined pretreatment with E. taxodii (10 days) and 0.25% H(2)SO(4) was proved to be more effective than the sole acid pretreatment. The reducing sugar yield from enzymatic hydrolysis of co-treated water hyacinth increased 1.13-2.11 fold than that of acid-treated water hyacinth at the same conditions. The following study on separate hydrolysis and fermentation with Saccharomyces cerevisiae indicated that the ethanol yield from co-treated water hyacinth achieved 0.192 g/g of dry matter, which increased 1.34-fold than that from acid-treated water hyacinth (0.146 g/g of dry matter). This suggested that the combination of biological and mild acid pretreatment is a promising method to improve enzymatic hydrolysis and ethanol production from water hyacinth with low lignin content. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  3. Anaerobic biodegradability of dairy wastewater pretreated with porcine pancreas lipase

    Directory of Open Access Journals (Sweden)

    Adriano Aguiar Mendes

    2010-12-01

    Full Text Available Lipids-rich wastewater was partial hydrolyzed with porcine pancreas lipase and the efficiency of the enzymatic pretreatment was verified by the comparative biodegradability tests (crude and treated wastewater. Alternatively, simultaneous run was carried out in which hydrolysis and digestion was performed in the same reactor. Wastewater from dairy industries and low cost lipase preparation at two concentrations (0.05 and 0.5% w.v-1 were used. All the samples pretreated with enzyme showed a positive effect on organic matter removal (Chemical Oxygen Demand-COD and formation of methane. The best results were obtained when hydrolysis and biodegradation were performed simultaneously, attaining high COD and color removal independent of the lipase concentration. The enzymatic treatment considerably improved the anaerobic operational conditions and the effluent quality (lower content of suspended solids and less turbidity. Thus, the use of enzymes such as lipase seemed to be a very promising alternative for treating the wastewaters having high fat and grease contents, such as those from the dairy industry.O presente trabalho teve como objetivo o pré-tratamento de efluente da indústria de laticínios na hidrólise de lipídeos, empregando lipase de fonte de células animais de baixo custo disponível comercialmente (pâncreas de porco na formação de gás metano por biodegradabilidade anaeróbia empregando diferentes concentrações de lipase (0,05 e 0,5 % w.v-1. A utilização de lipase no pré-tratamento do efluente acelerou a hidrólise de lipídeos e, conseqüentemente, auxiliou o tratamento biológico resultando na redução da matéria orgânica em termos de Demanda Química de Oxigênio (DQO, cor e sólidos em suspensão como lipídeos. Os melhores resultados em termos de remoção de DQO e cor foram obtidos quando a hidrólise e biodigestão foram realizadas simultaneamente, independente da concentração de lipase empregada. Estes resultados

  4. Low-sampling-rate ultra-wideband digital receiver using equivalent-time sampling

    KAUST Repository

    Ballal, Tarig

    2014-09-01

    In this paper, we propose an all-digital scheme for ultra-wideband symbol detection. In the proposed scheme, the received symbols are sampled many times below the Nyquist rate. It is shown that when the number of symbol repetitions, P, is co-prime with the symbol duration given in Nyquist samples, the receiver can sample the received data P times below the Nyquist rate, without loss of fidelity. The proposed scheme is applied to perform channel estimation and binary pulse position modulation (BPPM) detection. Results are presented for two receivers operating at two different sampling rates that are 10 and 20 times below the Nyquist rate. The feasibility of the proposed scheme is demonstrated in different scenarios, with reasonable bit error rates obtained in most of the cases.

  5. Balanced sampling

    NARCIS (Netherlands)

    Brus, D.J.

    2015-01-01

    In balanced sampling a linear relation between the soil property of interest and one or more covariates with known means is exploited in selecting the sampling locations. Recent developments make this sampling design attractive for statistical soil surveys. This paper introduces balanced sampling

  6. Short-Term Saved Leave Scheme

    CERN Multimedia

    HR Department

    2007-01-01

    As announced at the meeting of the Standing Concertation Committee (SCC) on 26 June 2007 and in http://Bulletin No. 28/2007, the existing Saved Leave Scheme will be discontinued as of 31 December 2007. Staff participating in the Scheme will shortly receive a contract amendment stipulating the end of financial contributions compensated by save leave. Leave already accumulated on saved leave accounts can continue to be taken in accordance with the rules applicable to the current scheme. A new system of saved leave will enter into force on 1 January 2008 and will be the subject of a new im-plementation procedure entitled "Short-term saved leave scheme" dated 1 January 2008. At its meeting on 4 December 2007, the SCC agreed to recommend the Director-General to approve this procedure, which can be consulted on the HR Department’s website at the following address: https://cern.ch/hr-services/services-Ben/sls_shortterm.asp All staff wishing to participate in the new scheme ...

  7. Short-Term Saved Leave Scheme

    CERN Multimedia

    2007-01-01

    As announced at the meeting of the Standing Concertation Committee (SCC) on 26 June 2007 and in http://Bulletin No. 28/2007, the existing Saved Leave Scheme will be discontinued as of 31 December 2007. Staff participating in the Scheme will shortly receive a contract amendment stipulating the end of financial contributions compensated by save leave. Leave already accumulated on saved leave accounts can continue to be taken in accordance with the rules applicable to the current scheme. A new system of saved leave will enter into force on 1 January 2008 and will be the subject of a new implementation procedure entitled "Short-term saved leave scheme" dated 1 January 2008. At its meeting on 4 December 2007, the SCC agreed to recommend the Director-General to approve this procedure, which can be consulted on the HR Department’s website at the following address: https://cern.ch/hr-services/services-Ben/sls_shortterm.asp All staff wishing to participate in the new scheme a...

  8. Financial incentive schemes in primary care

    Directory of Open Access Journals (Sweden)

    Gillam S

    2015-09-01

    Full Text Available Stephen Gillam Department of Public Health and Primary Care, Institute of Public Health, University of Cambridge, Cambridge, UK Abstract: Pay-for-performance (P4P schemes have become increasingly common in primary care, and this article reviews their impact. It is based primarily on existing systematic reviews. The evidence suggests that P4P schemes can change health professionals' behavior and improve recorded disease management of those clinical processes that are incentivized. P4P may narrow inequalities in performance comparing deprived with nondeprived areas. However, such schemes have unintended consequences. Whether P4P improves the patient experience, the outcomes of care or population health is less clear. These practical uncertainties mirror the ethical concerns of many clinicians that a reductionist approach to managing markers of chronic disease runs counter to the humanitarian values of family practice. The variation in P4P schemes between countries reflects different historical and organizational contexts. With so much uncertainty regarding the effects of P4P, policy makers are well advised to proceed carefully with the implementation of such schemes until and unless clearer evidence for their cost–benefit emerges. Keywords: financial incentives, pay for performance, quality improvement, primary care

  9. Comparison of aqueous ammonia and dilute acid pretreatment of bamboo fractions: Structure properties and enzymatic hydrolysis.

    Science.gov (United States)

    Xin, Donglin; Yang, Zhong; Liu, Feng; Xu, Xueru; Zhang, Junhua

    2015-01-01

    The effect of two pretreatments methods, aqueous ammonia (SAA) and dilute acid (DA), on the chemical compositions, cellulose crystallinity, morphologic change, and enzymatic hydrolysis of bamboo fractions (bamboo yellow, timber, green, and knot) was compared. Bamboo fractions with SAA pretreatment had better hydrolysability than those with DA pretreatment. High crystallinity index resulted in low hydrolysis yield in the conversion of SAA pretreated bamboo fractions, not DA pretreated fractions. The increase of cellulase loading had modestly positive effect in the hydrolysis of both SAA and DA pretreated bamboo fractions, while supplement of xylanase significantly increased the hydrolysis of the pretreated bamboo fractions, especially after SAA pretreatment. The results indicated that SAA pretreatment was more effective than DA pretreatment in conversion of bamboo fractions, and supplementation of xylanase was necessary in effective conversion of the SAA pretreated fractions into fermentable sugars. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. Pretreatment of microalgae to improve biogas production: a review.

    Science.gov (United States)

    Passos, Fabiana; Uggetti, Enrica; Carrère, Hélène; Ferrer, Ivet

    2014-11-01

    Microalgae have been intensively studied as a source of biomass for replacing conventional fossil fuels in the last decade. The optimization of biomass production, harvesting and downstream processing is necessary for enabling its full-scale application. Regarding biofuels, biogas production is limited by the characteristics of microalgae, in particular the complex cell wall structure of most algae species. Therefore, pretreatment methods have been investigated for microalgae cell wall disruption and biomass solubilization before undergoing anaerobic digestion. This paper summarises the state of the art of different pretreatment techniques used for improving microalgae anaerobic biodegradability. Pretreatments were divided into 4 categories: (i) thermal; (ii) mechanical; (iii) chemical and (iv) biological methods. According to experimental results, all of them are effective at increasing biomass solubilization and methane yield, pretreatment effect being species dependent. Pilot-scale research is still missing and would help evaluating the feasibility of full-scale implementation. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. Effects of Pretreatments in Convective Dehydration of Rosehip (Rosa eglanteria

    Directory of Open Access Journals (Sweden)

    Alejandra Mabellini

    2012-04-01

    Full Text Available The aim of this work was to experimentally determine drying curves for thin layer and bed drying of rosehip fruits, with and without pretreatments, to reduce processing times as a function of drying air operating variables, to propose dehydration kinetics of fruits and to determine its kinetic parameters for further use within drying simulation software. Fruits were pre-treated both chemically and mechanically, which included dipping the fruits in NaOH and ethyl oleate solutions; and cutting or perforating the fruit cuticle, respectively. Simulation models were then adopted to fit the kinetics drying data considering fruit volume shrinkage. These simple models minimized the calculation time during the simulation of deep-bed driers. Results show that pre-treatments reduced processing times up to 57%, and evaluated models satisfactorily predicted the drying of rosehip fruit. Effective mass diffusion coefficients were up to 4-fold greater when fruit was submitted to mechanical pretreatments.

  12. Effect of ultrasonic pretreatment on emulsion polymerization of styrene.

    Science.gov (United States)

    Nagatomo, Daichi; Horie, Takafumi; Hongo, Chizuru; Ohmura, Naoto

    2016-07-01

    This study investigated the effect of pretreatment of ultrasonic irradiation on emulsion polymerization of styrene to propose a process intensification method which gives high conversion, high reaction rate, and high energy efficiency. The solution containing styrene monomer was irradiated by a horn mounted on the ultrasonic transducer with the diameter of 5mm diameter and the frequency of 28 kHz before starting polymerization. The pretreatment of ultrasound irradiation as short as 1 min drastically improved monomer dispersion and increased reaction rate even under the agitation condition with low rotational speed of impeller. Furthermore, the ultrasonic pretreatment resulted in higher monomer concentration in polymer particles and produced larger polymer particles than conventional polymerization without ultrasonic pretreatment. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Optimization of microwave pretreatment on wheat straw for ethanol production

    DEFF Research Database (Denmark)

    Xu, Jian; Chen, Hongzhang; Kádár, Zsófia

    2011-01-01

    An orthogonal design (L9(34)) was used to optimize the microwave pretreatment on wheat straw for ethanol production. The orthogonal analysis was done based on the results obtained from the nine pretreatments. The effect of four factors including the ratio of biomass to NaOH solution, pretreatment...... time, microwave power, and the concentration of NaOH solution with three different levels on the chemical composition, cellulose/hemicellulose recoveries and ethanol concentration was investigated. According to the orthogonal analysis, pretreatment with the ratio of biomass to liquid at 80 g kg−1......, the NaOH concentration of 10 kg m−3, the microwave power of 1000 W for 15 min was confirmed to be the optimal condition. The ethanol yield was 148.93 g kg−1 wheat straw at this condition, much higher than that from the untreated material which was only 26.78 g kg−1....

  14. Ensiling as pretreatment of grass for lignocellulosic biomass conversion

    DEFF Research Database (Denmark)

    Ambye-Jensen, Morten

    Development of sound technologies of biomass conversion will be increasingly important for many years to come as planetary bounderies drive the development towards a biobased society. Pretreatment of lignocellulosic biomass is, in this regard, an essential technology. Current pretreatment methods......, based on severe physio-chemical processes, are effective, however, they are also costly and energy demanding. An alternative biological pretreatment method, based on the well-known biomass preservation of ensiling, has been proposed. Ensiling holds potential as an integrated storage and pretreatment...... was devoted to method development. This resulted in the development of a simple and flexible standard method forlaboratory ensilingwith a high reproducibility,which is well suited for high-throughput experiments.   A comprehensive study on important parameters in ensiling was conducted to find optimal...

  15. Pretreatments to enhance the digestibility of lignocellulosic biomass

    NARCIS (Netherlands)

    Hendriks, A.T.W.M.; Zeeman, G.

    2009-01-01

    Lignocellulosic biomass represents a rather unused source for biogas and ethanol production. Many factors, like lignin content, crystallinity of cellulose, and particle size, limit the digestibility of the hemicellulose and cellulose present in the lignocellulosic biomass. Pretreatments have as a

  16. 40 CFR 417.64 - Pretreatment standards for existing sources.

    Science.gov (United States)

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Soap Flakes and Powders Subcategory § 417.64 Pretreatment standards for existing sources. Any existing...

  17. 40 CFR 417.24 - Pretreatment standards for existing sources.

    Science.gov (United States)

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Fatty Acid Manufacturing by Fat Splitting Subcategory § 417.24 Pretreatment standards for existing sources. Any existing...

  18. 40 CFR 417.74 - Pretreatment standards for existing sources.

    Science.gov (United States)

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Bar Soaps Subcategory § 417.74 Pretreatment standards for existing sources. Any existing source subject to...

  19. Pretreatment of bituminous coal for hydrogenation

    Energy Technology Data Exchange (ETDEWEB)

    Hupfer, H.

    1943-03-29

    Bituminous coal became plastic at certain temperature ranges and swelled, causing plugging of preheater tubes. With few exceptions, this problem was encountered only when hydrogenating bituminous coal. This swelling often appeared in the coking of coals, and for the majority of the cases it was found that efforts to reduce the baking ability of bituminous coal also reduced the swelling of coal paste in the preheater tubes. Three methods of pretreatment to reduce swelling were preheating, oxidation (anoxidation), and sulfur treatment. The preheating by hot nitrogen at 250 atm for 3 hours showed no improvement in swelling characteristics, but produced a greater asphalt content and a lower amount of gasification. Absorption of oxygen was shown to increase the viscosity of the coal paste, while preheating in a vacuum showed no effects. Oxidation (anoxidation) increased the splitting and gasification and gave higher asphalt content. The baking ability of Saar coal could be destroyed by addition of 2.5% sulfur and heating for 1/sup 1///sub 2/ hours at 110/sup 0/C, in a stream of H/sub 2/S. The volatile content dropped significantly when the same coal was heated to 200/sup 0/ to 250/sup 0/C. When neutralized Saar coal was dried under a stream of H/sub 2/S, only slight deterioration of the yield was noted with equal degree of gasification. It was concluded that a more or less distinct improvement would be observed from the absorption of sulfur, but that residue processing would have to be altered to account for the sulfur content.

  20. Pretreatment seizure semiology in childhood absence epilepsy.

    Science.gov (United States)

    Kessler, Sudha Kilaru; Shinnar, Shlomo; Cnaan, Avital; Dlugos, Dennis; Conry, Joan; Hirtz, Deborah G; Hu, Fengming; Liu, Chunyan; Mizrahi, Eli M; Moshé, Solomon L; Clark, Peggy; Glauser, Tracy A

    2017-08-15

    To determine seizure semiology in children with newly diagnosed childhood absence epilepsy and to evaluate associations with short-term treatment outcomes. For participants enrolled in a multicenter, randomized, double-blind, comparative-effectiveness trial, semiologic features of pretreatment seizures were analyzed as predictors of treatment outcome at the week 16 to 20 visit. Video of 1,932 electrographic absence seizures from 416 participants was evaluated. Median seizure duration was 10.2 seconds; median time between electrographic seizure onset and clinical manifestation onset was 1.5 seconds. For individual seizures and by participant, the most common semiology features were pause/stare (seizure 95.5%, participant 99.3%), motor automatisms (60.6%, 86.1%), and eye involvement (54.9%, 76.5%). The interrater agreement for motor automatisms and eye involvement was good (72%-84%). Variability of semiology features between seizures even within participants was high. Clustering analyses revealed 4 patterns (involving the presence/absence of eye involvement and motor automatisms superimposed on the nearly ubiquitous pause/stare). Most participants experienced more than one seizure cluster pattern. No individual semiologic feature was individually predictive of short-term outcome. Seizure freedom was half as likely in participants with one or more seizure having the pattern of eye involvement without motor automatisms than in participants without this pattern. Almost all absence seizures are characterized by a pause in activity or staring, but rarely is this the only feature. Semiologic features tend to cluster, resulting in identifiable absence seizure subtypes with significant intraparticipant seizure phenomenologic heterogeneity. One seizure subtype, pause/stare and eye involvement but no motor automatisms, is specifically associated with a worse treatment outcome. © 2017 American Academy of Neurology.

  1. Effect of laser and air abrasion pretreatment on the microleakage of a fissure sealant applied with conventional and self etch adhesives.

    Science.gov (United States)

    Tirali, R E; Celik, C; Arhun, N; Berk, G; Cehreli, S B

    2013-01-01

    The purpose of this study was to investigate the effects of different pretreatment protocols along with different bonding agents on the microleakage of a fissure sealant material. A total of 144 freshly extracted noncarious human third molars were used The teeth were randomly assigned into three groups with respect to the pretreatment protocol employed: A. Air Abrasion B. Er,Cr:YSGG laser C. No pretreatment (Control). In each group specimens were further subjected to one of the following procedures before application of the sealant: 1. %36 Phosphoric acid-etch (AE) (DeTrey Conditioner 36/Denstply, UK) 2.AE+Prime&Bond NT (Dentsply, UK) 3. Clearfil S3 Bond (Kuraray, Japan) 4. Clearfil SE Bond (Kuraray, Japan). All teeth were sealed with the same fissure sealant material (Conseal F/SDI, Australia). Sealed teeth were further subjected to thermocycling, dye penetration test, sectioning and quantitative image analysis. Statistical evaluation of the microleakage data was performed with two way independent ANOVA and multiple comparisons test at p = 0.05. For qualitative evaluation 2 samples from each group were examined under Scanning Electron Microscopy. Microleakage was affected by both the type of pretreatment and the subsequent bonding protocols employed (p adhesive systems, unpretreated samples demonstrated the highest microleakage scores. For the groups in which bonding agent was utilized, pretreatments did not effected microleakage. Both the tested pretreatment protocols and adhesive procedures had different effects on the sealing properties of Conseal F in permanent tooth enamel.

  2. METAPHORIC MECHANISMS IN IMAGE SCHEME DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Pankratova, S.A.

    2017-06-01

    Full Text Available Problems of knowledge representation by means of images are still cognitively significant and invariably modern. The article deals with the image heuristic potential of a bookish sphere as a donor of meanings, aiding metaphoric scheme development of another modern sphere of cinematography. The key factor here is the differentiation between two basically different metaphor types – heuristic epiphora and image diaphora. The author had offered a unique methodology of counting of quantitative parameters of heuristic potential which opens the possibility of modeling the mechanisms of metaphoric meaning development. In the summary the author underscores that both ways of image scheme development are of importance to cognitive science, both heuristic epiphora and image-based diaphora play a significant role in the explication of image scheme development.

  3. IPCT: A scheme for mobile authentication

    Directory of Open Access Journals (Sweden)

    Vishnu Shankar

    2016-09-01

    Full Text Available Mobile is becoming a part of everyone's life and as their power of computation and storage is rising and cost is coming down. Most of mobile phone users have a lot of private data which they want to protect from others (La Polla et al., 2013. It means user must be authenticated properly for accessing the mobile resources. Normally user is authenticated using text passwords, PIN, face recognition or patterns etc. All these methods are used but they have some shortcomings. In this paper we have seen various existing methods of mobile authentications and proposed our improved mobile authentication IPCT scheme. We have compared our Image Pass Code with tapping scheme with existing techniques and shown that our scheme is better than existing techniques.

  4. Tradable white certificate schemes : what can we learn from tradable green certificate schemes?

    NARCIS (Netherlands)

    Oikonomou, Vlasis; Mundaca, Luis

    In this paper, we analyze the experiences gained from tradable green certificate (TGC) schemes and extract some policy lessons that can lead to a successful design of a market-based approach for energy efficiency improvement, alias tradable white certificate schemes. We use tradable green

  5. A simple angular transmit diversity scheme using a single RF frontend for PSK modulation schemes

    DEFF Research Database (Denmark)

    Alrabadi, Osama Nafeth Saleem; Papadias, Constantinos B.; Kalis, Antonis

    2009-01-01

    array (SPA) with a single transceiver, and an array area of 0.0625 square wavelengths. The scheme which requires no channel state information (CSI) at the transmitter, provides mainly a diversity gain to combat against multipath fading. The performance/capacity of the proposed diversity scheme...

  6. Interaction of Solvents and Mechanical Pretreatment with Enzymatic Lignocellulose Hydrolysis

    OpenAIRE

    Wang, Yumei

    2017-01-01

    Renewable plant biomass is considered as an alternative raw material for the production of fuels and chemicals instead of decreasing fossil resources. Enzymatic hydrolysis of pretreated lignocellulosic material to produce high sugar concentrations is one important step in a bio-refinery process, and can be operated under moderate conditions without by-products. However, the efficiency of the enzymatic hydrolysis is hindered by lignocellulose recalcitrance. Therefore, pretreatments of the biom...

  7. Experimental intracerebral haemorrhage: the effect of nimodipine pretreatment.

    OpenAIRE

    Sinar, E J; Mendelow, A D; Graham, D I; Teasdale, G M

    1988-01-01

    The effect of pretreatment with the calcium antagonist nimodipine on the pathophysiological events which follow an intracerebral haemorrhage in rats was compared with a similar control group. Cerebral blood flow was higher and the amount of pathologically determined ischaemic damage measured by light microscopy was less in the nimodipine pretreated group. Bloodbrain barrier permeability was increased in the nimodipine group, but there was no evidence of cerebral oedema. Nimodipine appeared to...

  8. EFFECTS OF PRETREATMENTS ON CALCIUM ACCUMULATION ONTO GAC

    OpenAIRE

    Miño, Esteban R.; Okuda, Tetsuji; NISHIJIMA, Wataru; OKADA, Mitsumasa

    2007-01-01

    The effect of coagulation and ozonation as pretreatments for granular activated carbon (GAC) filtration on calcium accumulation onto GAC was studied. Three kinds of FA solutions extracted from commercial leaf mold for horticulture were used: FA itself, FA after coagulation (FA-c) and FA after ozonation (FA-oz). Coagulation used as pretreatment before GAC filtration significantly decreased calcium accumulation onto GAC while ozonation caused a small increase on calcium accumulation onto GA...

  9. Sulfite (SPORL) pretreatment of switchgrass for enzymatic saccharification

    Science.gov (United States)

    D.S. Zhang; Q. Yang; J.Y. Zhu; X.J. Pan

    2013-01-01

    SPORL (Sulfite Pretreatment to Overcome Recalcitrance of Lignocellulose) pretreatment was applied to switchgrass and optimized through an experimental design using Response Surface Methodology within the range of temperature (163–197 °C), time (3–37 min), sulfuric acid dosage (0.8–4.2% on switchgrass), and sodium sulfite dosage (0.6–7.4% on switchgrass)....

  10. The Use of Clay-Polymer Nanocomposites in Wastewater Pretreatment

    OpenAIRE

    Giora Rytwo

    2012-01-01

    Some agricultural effluents are unsuitable for discharge into standard sewage-treatment plants: their pretreatment is necessary to avoid clogging of the filtering devices by colloidal matter. The colloidal stability of the effluents is mainly due to mutual repulsive forces that keep charged particles in suspension. Pretreatment processes are based on two separate stages: (a) neutralization of the charges (“coagulation”) and (b) bridging between several small particles to form larger aggregate...

  11. Lab-on-Valve Micro Sequential Injection: A Versatile Approach for Implementing Integrated Sample Pre-preparations and Executing (Bio)Chemical Assays

    DEFF Research Database (Denmark)

    Hansen, Elo Harald

    of the renewable microcolumn concept. Despite their excellent analytical chemical capabilities, ETAAS as well as ICPMS often require that the samples are subjected to suitable pretreatment in order to obtain the necessary sensitivity and selectivity. Either in order to separate the analyte from potentially......Since its introduction in 1975, Flow Injection Analysis (FIA) has established itself as an indispensable analytical concept that not only has permitted the implementation of numerous intriguing analysis procedures. But, more importantly, it has made it possible to facilitate the execution...... of procedures which are difficult or, in fact, otherwise impossible to do, thereby opening new and novel avenues for analytical methods relying on concepts such as kinetic discriminations schemes, exploitation of metastable constituents of attractive analytical characteristics, or utilisation of detection...

  12. Carbon trading: Current schemes and future developments

    Energy Technology Data Exchange (ETDEWEB)

    Perdan, Slobodan, E-mail: slobodan.perdan@manchester.ac.uk [School of Chemical Engineering and Analytical Science, Room F30, The Mill, University of Manchester, Sackville Street, Manchester M13 9PL (United Kingdom); Azapagic, Adisa [School of Chemical Engineering and Analytical Science, Room F30, The Mill, University of Manchester, Sackville Street, Manchester M13 9PL (United Kingdom)

    2011-10-15

    This paper looks at the greenhouse gas (GHG) emissions trading schemes and examines the prospects of carbon trading. The first part of the paper gives an overview of several mandatory GHG trading schemes around the world. The second part focuses on the future trends in carbon trading. It argues that the emergence of new schemes, a gradual enlargement of the current ones, and willingness to link existing and planned schemes seem to point towards geographical, temporal and sectoral expansion of emissions trading. However, such expansion would need to overcome some considerable technical and non-technical obstacles. Linking of the current and emerging trading schemes requires not only considerable technical fixes and harmonisation of different trading systems, but also necessitates clear regulatory and policy signals, continuing political support and a more stable economic environment. Currently, the latter factors are missing. The global economic turmoil and its repercussions for the carbon market, a lack of the international deal on climate change defining the Post-Kyoto commitments, and unfavourable policy shifts in some countries, cast serious doubts on the expansion of emissions trading and indicate that carbon trading enters an uncertain period. - Highlights: > The paper provides an extensive overview of mandatory emissions trading schemes around the world. > Geographical, temporal and sectoral expansion of emissions trading are identified as future trends. > The expansion requires considerable technical fixes and harmonisation of different trading systems. > Clear policy signals, political support and a stable economic environment are needed for the expansion. > A lack of the post-Kyoto commitments and unfavourable policy shifts indicate an uncertain future for carbon trading.

  13. Clocking Scheme for Switched-Capacitor Circuits

    DEFF Research Database (Denmark)

    Steensgaard-Madsen, Jesper

    1998-01-01

    A novel clocking scheme for switched-capacitor (SC) circuits is presented. It can enhance the understanding of SC circuits and the errors caused by MOSFET (MOS) switches. Charge errors, and techniques to make SC circuits less sensitive to them are discussed.......A novel clocking scheme for switched-capacitor (SC) circuits is presented. It can enhance the understanding of SC circuits and the errors caused by MOSFET (MOS) switches. Charge errors, and techniques to make SC circuits less sensitive to them are discussed....

  14. An Elaborate Secure Quantum Voting Scheme

    Science.gov (United States)

    Zhang, Jia-Lei; Xie, Shu-Cui; Zhang, Jian-Zhong

    2017-10-01

    An elaborate secure quantum voting scheme is presented in this paper. It is based on quantum proxy blind signature. The eligible voter's voting information can be transmitted to the tallyman Bob with the help of the scrutineer Charlie. Charlie's supervision in the whole voting process can make the protocol satisfy fairness and un-repeatability so as to avoid Bob's dishonest behaviour. Our scheme uses the physical characteristics of quantum mechanics to achieve voting, counting and immediate supervision. In addition, the program also uses quantum key distribution protocol and quantum one-time pad to guarantee its unconditional security.

  15. A COMPLETE SCHEME FOR A MUON COLLIDER.

    Energy Technology Data Exchange (ETDEWEB)

    PALMER,R.B.; BERG, J.S.; FERNOW, R.C.; GALLARDO, J.C.; KIRK, H.G.; ALEXAHIN, Y.; NEUFFER, D.; KAHN, S.A.; SUMMERS, D.

    2007-09-01

    A complete scheme for production, cooling, acceleration, and ring for a 1.5 TeV center of mass muon collider is presented, together with parameters for two higher energy machines. The schemes starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Six dimensional cooling in long-period helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains into single bunches, one of each sign. Further cooling in all dimensions is applied to the single bunches in further helical lattices. Final transverse cooling to the required parameters is achieved in 50 T solenoids.

  16. Autonomous droop scheme with reduced generation cost

    DEFF Research Database (Denmark)

    Nutkani, Inam Ullah; Loh, Poh Chiang; Blaabjerg, Frede

    2013-01-01

    Droop scheme has been widely applied to the control of Distributed Generators (DGs) in microgrids for proportional power sharing based on their ratings. For standalone microgrid, where centralized management system is not viable, the proportional power sharing based droop might not suit well since...... DGs are usually of different types unlike synchronous generators. This paper presents an autonomous droop scheme that takes into consideration the operating cost, efficiency and emission penalty of each DG since all these factors directly or indirectly contributes to the Total Generation Cost (TGC...

  17. Security problem on arbitrated quantum signature schemes

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jeong Woon [Emerging Technology R and D Center, SK Telecom, Kyunggi 463-784 (Korea, Republic of); Chang, Ku-Young; Hong, Dowon [Cryptography Research Team, Electronics and Telecommunications Research Institute, Daejeon 305-700 (Korea, Republic of)

    2011-12-15

    Many arbitrated quantum signature schemes implemented with the help of a trusted third party have been developed up to now. In order to guarantee unconditional security, most of them take advantage of the optimal quantum one-time encryption based on Pauli operators. However, in this paper we point out that the previous schemes provide security only against a total break attack and show in fact that there exists an existential forgery attack that can validly modify the transmitted pair of message and signature. In addition, we also provide a simple method to recover security against the proposed attack.

  18. Droop Scheme With Consideration of Operating Costs

    DEFF Research Database (Denmark)

    Nutkani, I. U.; Loh, Poh Chiang; Blaabjerg, Frede

    2014-01-01

    considered even though they are different for different types of DGs. This letter thus proposes an alternative droop scheme, which can better distinguish the different operating characteristics and objectives of the DGs grouped together in a weighted droop expression. The power sharing arrived in the steady......Although many droop schemes have been proposed for distributed generator (DG) control in a microgrid, they mainly focus on achieving proportional power sharing based on the DG kVA ratings. Other factors like generation costs, efficiencies, and emission penalties at different loads have not been...

  19. Influence of pretreatment of cotton yarns prior to biopolishing.

    Science.gov (United States)

    Ulson de Souza, A A; Ferreira, F C S; Guelli U Souza, S M A

    2013-04-02

    Cellulase is one of the enzymes most commonly used in the textile industry for the biopolishing process. The appropriate choice of pretreatment is a possible route to promoting enzymatic attack in situations in which this is not favored due to the effects of packing. In order to evaluate the influence of pretreatment the yarn was maintained in water for 24h before biopolishing to promote greater spacing between the chains. In the tensile testing the pretreated Combed 13/1 yarn showed a greater percentage reduction in the maximum breaking force following biopolishing, evidencing a stronger enzymatic attack. Also, the Combed 13/1 and OE 14/1 yarns without pretreatment had an approximately 22% reduction in the shrinkage and after pretreatment the Carded 13/1 yarn had the best shrinkage reduction values (18%). These data demonstrate that the introduction of the pretreatment promotes a change in the access of the enzyme to the fiber. Copyright © 2012 Elsevier Ltd. All rights reserved.

  20. Coagulation pretreatment of highly concentrated acrylonitrile wastewater from petrochemical plants.

    Science.gov (United States)

    Zheng, Dongju; Qin, Lin; Wang, Tao; Ren, Xiaojing; Zhang, Zhongguo; Li, Jiding

    2014-01-01

    Acrylonitrile (AN) wastewater is a heavily polluted and a likely hazardous liquid that is generated during the production of AN. Several chemical methods for the pretreatment of AN wastewater are available in laboratory scale. However, the harsh reaction conditions and high operational cost make these methods undesirable. Until now, four-effect evaporation is the only pretreatment method used for AN wastewater in industry despite its huge energy consumption and high cost. It is difficult to find an energy-saving pretreatment technique from the perspective of industrial application. In this study, a safe and low-cost coagulation technique was developed for the pretreatment of AN wastewater. Three types of inorganic coagulant and three types of polymer coagulant were investigated for the coagulation treatment of highly concentrated AN wastewater from petrochemical plants. The effects of coagulant type, dosage, and coagulation conditions on the pretreatment efficiency of AN wastewater were investigated. The results show that a combination of inorganic and polymer coagulants is effective for the pretreatment of AN wastewater.