WorldWideScience

Sample records for samarium

  1. Synthesis of Samarium Cobalt Nanoblades

    Energy Technology Data Exchange (ETDEWEB)

    Darren M. Steele

    2010-08-25

    As new portable particle acceleration technologies become feasible the need for small high performance permanent magnets becomes critical. With particle accelerating cavities of a few microns, the photonic crystal fiber (PCF) candidate demands magnets of comparable size. To address this need, samarium cobalt (SmCo) nanoblades were attempted to be synthesized using the polyol process. Since it is preferable to have blades of 1-2 {micro}m in length, key parameters affecting size and morphology including method of stirring, reaction temperature, reaction time and addition of hydroxide were examined. Nanoparticles consisting of 70-200 nm spherical clusters with a 3-5 nm polyvinylpyrrolidone (PVP) coating were synthesized at 285 C and found to be ferromagnetic. Nanoblades of 25nm in length were observed at the surface of the nanoclusters and appeared to suggest agglomeration was occurring even with PVP employed. Morphology and size were characterized using a transmission electron microscope (TEM). Powder X-Ray Diffraction (XRD) analysis was conducted to determine composition but no supportive evidence for any particular SmCo phase has yet been observed.

  2. Particle-Size-Induced Valence Changes in Samarium Clusters

    Energy Technology Data Exchange (ETDEWEB)

    Mason, M. G.; Lee, S. -T.; Apai, G.; Davis, R. F.; Shirley, D. A.; Franciosi, A.; Weaver, J. H.

    1981-09-01

    Samarium clusters exhibit mixed-valence behavior which is sensitive to particle size. XPS and UPS data show samarium to be primarily divalent (4f{sup 6} ) at small particle size. The trivalent state (4f{sup 5} ) becomes progressively more abundant with increasing s1ze, becoming the dominant state for the bulk metal. These results are interpreted using a model in which band narrowing, due to reduced surface coordination, is more dominant than surface tension effects in establishing the valence of small samarium clusters.

  3. Yellow-green electroluminescence of samarium complexes of 8-hydroxyquinoline

    Energy Technology Data Exchange (ETDEWEB)

    Behzad, Sara Karimi; Najafi, Ezzatollah [Department of Chemistry Shahid Beheshti University G.C., Tehran 1983963113 (Iran, Islamic Republic of); Amini, Mostafa M., E-mail: m-pouramini@sbu.ac.ir [Department of Chemistry Shahid Beheshti University G.C., Tehran 1983963113 (Iran, Islamic Republic of); Janghouri, Mohammad; Mohajerani, Ezeddin [Laser Research Institute Shahid Beheshti University G.C., Tehran 1983963113 (Iran, Islamic Republic of); Ng, Seik Weng [Department of Chemistry, University of Malaya, 50603 Kuala Lumpur (Malaysia)

    2014-12-15

    Four novel samarium complexes were prepared by reacting samarium(III) nitrate with 8-hydroxyquinoline, 2-methyl-8-hydroxyquinoline, and 1,10-phenanthroline and utilized as emitting materials in the electroluminescence device. All complexes were characterized by elemental analysis, infrared, UV–vis and {sup 1}H NMR spectroscopes and the molecular structure of a representative complex, [Sm{sub 2}(Me-HQ){sub 4}(NO{sub 3}){sub 6}] (1), was determined by single-crystal X-ray diffraction. Utilization of a π-conjugated (phenanthroline) ligand as a second ligand in the structure of the samarium complexes resulted in red shifts in both absorption and fluorescence spectra of complexes and moderately enhanced the photoluminescence intensity and the fluorescence quantum yield. The maximum emission peaks showed that a good correlation exists between the nature of the substituent group on the 8-hydroxyquinoline and the addition of the π-conjugated ligand in the structure of samarium complexes and emission wavelength. Devices with samarium(III) complexes with structure of ITO/PEDOT:PSS (90 nm)/PVK:PBD:Sm(III) complexes (75 nm)/Al (180 nm) were fabricated. In the electroluminescence (EL) spectra of the devices, a strong ligand-centered emission and narrow bands arising from the {sup 4}G{sub 5/2}→{sup 6}H{sub J} transitions (J=7/2, 9/2, and 11/2) of the samarium ion were observed for the complexes. The electroluminescent spectra of the samarium complexes were red-shifted as compared with the PVK:PBD blend. We believe that the electroluminescence performance of OLED devices based on samarium complexes relies on overlaps between the absorption of the samarium compounds and the emission of PVK:PBD. This revealed that it is possible to evaluate the electroluminescence performance of the samarium compounds-doped OLED devices based on the emission of PVK:PBD and the absorption of the dopants. - Highlights: • Four novel photoluminescence samarium complexes have been synthesized.

  4. Biodistribution of samarium-153-EDTMP in rats treated with docetaxel

    Energy Technology Data Exchange (ETDEWEB)

    Villarim Neto, Arthur; Acucena, Maria Kadja Meneses Torres; Pereira, Kercia Regina Santos Gomes; Rego, Amalia Cinthia Meneses [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Postgraduate Program in Health Sciences; Azevedo, Italo Medeiros; Medeiros, Aldo Cunha [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Dept. of Surgery; Bernardo-Filho, Mario [State University of Rio de Janeiro, RJ (Brazil). Dept. of Biophysics and Biometry

    2009-01-15

    Purpose: Many patients with metastatic bone disease have to use radiopharmaceuticals associated with chemotherapy to relieve bone pain. The aim of this study was to assess the influence of docetaxel on the biodistribution of samarium-153-EDTMP in bones and other organs of rats. Methods: Wistar male rats were randomly allocated into 2 groups of 6 rats each. The DS (docetaxel/samarium) group received docetaxel (15 mg/kg) intraperitoneally in two cycles 11 days apart. The S (samarium/control) group rats were not treated with docetaxel. Nine days after chemotherapy, all the rats were injected with 0.1 ml of samarium-153-EDTMP via orbital plexus (25 {mu} Ci. After 2 hours, the animals were killed and samples of the brain, thyroid, lung, heart, stomach, colon, liver, kidney and both femurs were removed. The percentage radioactivity of each sample (% ATI / g) was determined in an automatic gamma-counter (Wizard-1470, Perkin-Elmer, Finland). Results: On the ninth day after the administration of the second chemotherapy cycle, the rats had a significant weight loss (314.50 +- 22.09 g) compared (p<0.5) to pre-treatment weight (353.66 {+-} 22.8). The % ATI/g in the samples of rats treated with samarium-153-EDTMP had a significant reduction in the right femur, left femur, kidney, liver and lungs of animals treated with docetaxel, compared to the control rats. Conclusion: The combination of docetaxel and samarium-153-EDTMP was associated with a lower response rate in the biodistribution of the radiopharmaceutical to targeted tissues. Further investigation into the impact of docetaxel on biodistribution of samarium-153-EDTMP would complement the findings of this study. (author)

  5. The Basis for Developing Samarium AMS for Fuel Cycle Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Buchholz, B A; Biegalski, S R; Whitney, S M; Tumey, S J; Weaver, C J

    2008-10-13

    Modeling of nuclear reactor fuel burnup indicates that the production of samarium isotopes can vary significantly with reactor type and fuel cycle. The isotopic concentrations of {sup 146}Sm, {sup 149}Sm, and {sup 151}Sm are potential signatures of fuel reprocessing, if analytical techniques can overcome the inherent challenges of lanthanide chemistry, isobaric interferences, and mass/charge interferences. We review the current limitations in measurement of the target samarium isotopes and describe potential approaches for developing Sm-AMS. AMS sample form and preparation chemistry will be discussed as well as possible spectrometer operating conditions.

  6. Optical characteristics of transparent samarium oxide thin films ...

    Indian Academy of Sciences (India)

    Optical characteristics of transparent samarium oxide thin films deposited by the radio-frequency sputtering technique. A A ATTA M M EL-NAHASS KHALED M ELSABAWY M M ABD EL-RAHEEM A M HASSANIEN A ALHUTHALI ALI BADAWI AMAR MERAZGA. Regular Volume 87 Issue 5 November 2016 Article ID 72 ...

  7. Optical properties of zinc–vanadium glasses doped with samarium ...

    Indian Academy of Sciences (India)

    Zinc–vanadium glasses doped with samarium oxide having the chemical composition Sm2O3() ZnO(40-)V2O5(60) (where = 0.1–0.5 mol%) were prepared by melt quenching method. The density of these glasses was measured by Archimedes method; the corresponding molar volumes have also been calculated.

  8. Optical properties of samarium doped zinc–tellurite glasses

    Indian Academy of Sciences (India)

    Unknown

    Optical properties of samarium doped zinc–tellurite glasses. B ERAIAH. Department of Physics, Karnatak University, Dharwad 580 003, India. Present address: Department of Physics, Bangalore University, Bangalore 560 056, India. MS received 20 March 2006; revised 13 June 2006. Abstract. Glasses with the composition, ...

  9. Effect of second ligand on the luminescence of Samarium (III ...

    Indian Academy of Sciences (India)

    Effect of second ligand on the luminescence of Samarium (III) dibenzoylmethane complexes: Syntheses, crystal structures, thermal analysis and luminescence study. MUHAMMAD IDIRIS SALEH, MIN YEE CHOO, TAI WEI CHAN and MOHD R RAZALI. ∗. School of Chemical Sciences, Universiti Sains Malaysia, Penang, ...

  10. Effect of second ligand on the luminescence of Samarium (III ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 127; Issue 12. Effect of second ligand on the luminescence of Samarium (III) dibenzoylmethane complexes: ... Muhammad Idiris Saleh1 Min Yee Choo1 Tai Wei Chan1 Mohd R Razali1. School of Chemical Sciences, Universiti Sains Malaysia, Penang, Malaysia ...

  11. Dependence of samarium-soil interaction on samarium concentration: Implications for environmental risk assessment.

    Science.gov (United States)

    Ramírez-Guinart, Oriol; Salaberria, Aitor; Vidal, Miquel; Rigol, Anna

    2018-03-01

    The sorption and desorption behaviour of samarium (Sm), an emerging contaminant, was examined in soil samples at varying Sm concentrations. The obtained sorption and desorption parameters revealed that soil possessed a high Sm retention capacity (sorption was higher than 99% and desorption lower than 2%) at low Sm concentrations, whereas at high Sm concentrations, the sorption-desorption behaviour varied among the soil samples tested. The fractionation of the Sm sorbed in soils, obtained by sequential extractions, allowed to suggest the soil properties (pH and organic matter solubility) and phases (organic matter, carbonates and clay minerals) governing the Sm-soil interaction. The sorption models constructed in the present work along with the sorption behaviour of Sm explained in terms of soil main characteristics will allow properly assessing the Sm-soil interaction depending on the contamination scenario under study. Moreover, the sorption and desorption K d values of radiosamarium in soils were strongly correlated with those of stable Sm at low concentrations (r = 0.98); indicating that the mobility of Sm radioisotopes and, thus, the risk of radioactive Sm contamination can be predicted using data from low concentrations of stable Sm. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Mechanism of the electrochemical deposition of samarium-based coatings

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz, Edgar J. [Electrochemistry Department, Centro de Investigacion y Desarrollo Tecnologico en Electroquimica, Parque Tecnologico Queretaro Sanfandila, P.O. Box 064, Pedro Escobedo, 76700 Queretaro (Mexico); Ortega-Borges, Raul [Electrochemistry Department, Centro de Investigacion y Desarrollo Tecnologico en Electroquimica, Parque Tecnologico Queretaro Sanfandila, P.O. Box 064, Pedro Escobedo, 76700 Queretaro (Mexico); Godinez, Luis A. [Electrochemistry Department, Centro de Investigacion y Desarrollo Tecnologico en Electroquimica, Parque Tecnologico Queretaro Sanfandila, P.O. Box 064, Pedro Escobedo, 76700 Queretaro (Mexico); Chapman, Thomas W. [Electrochemistry Department, Centro de Investigacion y Desarrollo Tecnologico en Electroquimica, Parque Tecnologico Queretaro Sanfandila, P.O. Box 064, Pedro Escobedo, 76700 Queretaro (Mexico); Meas-Vong, Yunny [Electrochemistry Department, Centro de Investigacion y Desarrollo Tecnologico en Electroquimica, Parque Tecnologico Queretaro Sanfandila, P.O. Box 064, Pedro Escobedo, 76700 Queretaro (Mexico)]. E-mail: yunnymeas@cideteq.mx

    2006-11-12

    Samarium-based films have been shown to form from aqueous solutions on the surfaces of metallic substrates such as steel or aluminum, and their presence has been reported to decrease substantially the corresponding corrosion rate of the underlying metallic substrate. Based on previous reports on the deposition of oxides or hydroxides of the closely related element cerium, this work demonstrates that samarium films are formed following a similar mechanism, which involves as the fundamental step an increase in interfacial pH resulting from cathodic oxygen-reduction or hydrogen-evolution reactions. With cyclic voltammetry (CV), electrochemical quartz-crystal microbalance (EQCM) measurements, rotating-disk electrode (RDE) tests, and surface characterization techniques, namely, scanning electron microscopy (SEM) and X-ray surface microanalysis (EDX), the postulated mechanism was verified, and the surface morphology of the resulting films was correlated with the nature of the reduction reaction that triggers film formation.

  13. Samarium Monosulfide (SmS): Reviewing Properties and Applications

    OpenAIRE

    Sousanis, Andreas; Smet, Philippe; Poelman, Dirk

    2017-01-01

    In this review, we give an overview of the properties and applications of samarium monosulfide, SmS, which has gained considerable interest as a switchable material. It shows a pressure-induced phase transition from the semiconducting to the metallic state by polishing, and it switches back to the semiconducting state by heating. The material also shows a magnetic transition, from the paramagnetic state to an antiferromagnetically ordered state. The switching behavior between the semiconducti...

  14. Optical properties of zinc–vanadium glasses doped with samarium ...

    Indian Academy of Sciences (India)

    Abstract. Zinc–vanadium glasses doped with samarium oxide having the chemical composition Sm2O3(x). ZnO(40−x)V2O5(60)(where x = 0·1–0·5 mol%) were prepared by melt quenching method. The density of these glasses was measured by Archimedes method; the corresponding molar volumes have also been ...

  15. Synthesis of nano-pore samarium (III)-imprinted polymer for preconcentrative separation of samarium ions from other lanthanide ions via solid phase extraction

    Energy Technology Data Exchange (ETDEWEB)

    Shirvani-Arani, Simindokht [Center of Excellence in Electrochemistry, Department of Chemistry, University of Tehran, P.O.Box:14155-6455, Tehran (Iran, Islamic Republic of); Jaber Ibne Hayan Research Laboratories, Nuclear Science and Technology Research Institute, P.O. Box: 11365-8486, Tehran (Iran, Islamic Republic of); Ahmadi, Seyed Javad [Jaber Ibne Hayan Research Laboratories, Nuclear Science and Technology Research Institute, P.O. Box: 11365-8486, Tehran (Iran, Islamic Republic of)], E-mail: sjahmadi@aeoi.org.ir; Bahrami-Samani, Ali [Nuclear Engineering and Physics Department, Amir Kabir University, P.O.Box: 15875-4413, Tehran (Iran, Islamic Republic of); Jaber Ibne Hayan Research Laboratories, Nuclear Science and Technology Research Institute, P.O. Box: 11365-8486, Tehran (Iran, Islamic Republic of); Ghannadi-Maragheh, Mohammad [Jaber Ibne Hayan Research Laboratories, Nuclear Science and Technology Research Institute, P.O. Box: 11365-8486, Tehran (Iran, Islamic Republic of)

    2008-08-08

    A batch process was developed to separate samarium ions from some lanthanide ions by a novel solid phase which was prepared via the ion-imprinting technique. The samarium (III) ion-imprinted polymer (IIP) particles were synthesized by preparing the ternary complex of samarium ions with 5,7-dichloroquinoline-8-ol (DCQ) and 4-vinylpyridine (VP). Then, thermally copolymerization with styrene (functional monomer, STY) and divinylbenzene (cross-linking monomer, DVB) followed in the presence of 2-methoxy ethanol (porogen) and 2,2'-azobisisobutyronitrile (initiator, AIBN). The imprinted ion was removed by stirring the above particles with 50% (v/v) HCl to obtain the leached IIP particles. Moreover, control polymer (CP) particles were similarly prepared without the samarium ions. The unleached and leached IIP particles were characterized by X-ray diffraction (XRD), infra-red spectroscopy (IR), thermo gravimetric analysis (TGA) and scanning electron microscopy (SEM). Finally, preconcentration and selectivity studies for samarium and the other lanthanide ions were carried out. The preconcentration of the samarium (III) traces was studied during rebinding with the leached IIP particles as a function of pH, the weight of the polymer material, the preconcentration and the elution times, the eluent volume and the aqueous phase volume. These studies indicated that the samarium (III) amount as low as 1 {mu}g, present in 200 mL, could be preconcentrated into 25 mL of 1.0 M HCl.

  16. Ionization of Samarium by Chemical Releases in the Upper Atmosphere

    Science.gov (United States)

    Siefring, C. L.; Bernhardt, P. A.; Holmes, J. M.; Pedersen, T. R.; Caton, R.; Miller, D.; Groves, K. M.

    2014-12-01

    The release of Samarium vapor into the upper atmosphere was studied using during the Air Force Research Laboratory sponsored Metal Oxide Space Cloud (MOSC) rocket launches in May 2009. The Naval Research Laboratory supported these experiments with 3-D photochemical modeling of the artificial plasma cloud including (1) reactions with atomic oxygen, (2) photo excitation, (3) photoionization, (4) dissociative recombination, and (5) ion and neutral diffusion. NRL provided the experimental diagnostic instrument on the rocket which was a dual frequency radio beacon on the rocket to measure changes in total electron content. The AFRL provided ground based diagnostics of incoherent scatter radar and optical spectroscopy and imagery. The NRL Chemical Release Model (CRM) has over 600 excited states of atomic Samarium neutrals, atomic ions, along with Samarium Oxide Ions and electrons. Diffusive transport of neutrals in cylindrical geometry and ions along magnetic field lines is computed along with the reactive flow to predict the concentrations of Sm, Sm-Ion, Sm0, and SmO Ion. Comparison of the CRM with observations demonstrates that Sm release into the upper atmosphere initially produces enhanced electron densities and SmO-Ions. The diatomic ions recombine with electrons to yield neutral Sm and O. Only the photo ionization of Sm yields a stable atomic ion that does not substantially recombine. The MOSC releases in sunlight yielded long duration ion clouds that can be replicated with the CRM. The CRM predicts that Sm releases in darkness would not produce long duration plasma clouds because of the lack of photo excitation and photoionization.

  17. Reactive Materials for Evaporating Samarium (Pre-Print)

    Science.gov (United States)

    2016-04-15

    SUBJECT TERMS energetic materials, heat sources, pyrotechnic charges, easily ionized metals 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF...experiments.    Keywords:  energetic  materials, heat sources, pyrotechnic charges, easily ionized metals  1. Introduction Ejection of clouds of...results  were  negatively  affected  by  reduced  efficiency   of  release  and  ionization of samarium [8]. It is possible that not the entire charge of

  18. Implementation of an analytical technique for Samarium; Implementacion de una tecnica analitica para Samario

    Energy Technology Data Exchange (ETDEWEB)

    Garcia G, N. [ININ, Carretera Mexico-Toluca Km. 36.5, 52045 Estado de Mexico (Mexico)

    2004-07-01

    Since the Samarium presents the same chemical properties that the plutonium, it has been used as homologous in studies that allow us to know the behavior that the plutonium presents in solution, with the advantage of working with an inactive and not very dangerous element. At the moment studies of sorption of plutonium or samarium are made on some mineral matrices that present certain surface properties. Due to the low concentrations that are used in the studies of sorption of samarium on those reagent substrates, their detection becomes very difficult for the conventional analysis media. The luminescence is a technique that can detect lower concentrations, smaller at 1 X 10{sup -} {sup 2} M, but when fluorofors are used this limit of detection increases in several orders of magnitude. In this work it has been used the arsenazo-III as fluorofor agent since it reacts in a specific way with the samarium, forming a complex that presents a proportional luminescence to the concentration of the present samarium. The advantage of making the quantification of samarium by luminescence is that it can use the same instrumental equipment to determine the speciation of the samarium sipped in the zircon. (Author)

  19. Synthesis of samarium binding bleomycin - a possible NCT radiosensitizer

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, B.M., E-mail: bmm@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Mendes, T.M.; Campos, T.P.R., E-mail: campos@nuclear.ufmg.b [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil)

    2011-07-01

    Bleomycin (BLM) is a drug that has attractive features for the development of a new radiopharmaceutical, particularly with regard to neutron capture therapy (NCT) sensitized by Sm-149. It has the ability to chelate many metal ions. In vitro studies have shown that up to 78% of BLM present in a cell is accumulated inside the nucleus or in the nuclear membrane. In addition, this drug has higher affinity for tumor tissues than for normal tissues. Radioactive isotopes carried by this antibiotic would be taken preferentially to one important cellular targets DNA. Besides, BLM displays intrinsic anti-tumor activity - it is a chemotherapic antibiotic clinically used against some cancers. This study aimed to obtain bleomycin molecules bound to samarium (BLM-Sm) for NCT studies in vitro and in vivo. The binding technique employed in this work has great simplicity and low cost. Thin layer chromatography, high performance liquid chromatography, fast protein liquid chromatography and analysis by ICP-AES were applied to verify the binding molecule. ICP-AES results showed the presence of samarium in the sample peaks related to BLM-Sm. However, efficiency and stability of this bond needs to be investigated. (author)

  20. Luminescent solutions and powders of new samarium complexes with N,N',O,O'-chelating ligands

    Science.gov (United States)

    Kharcheva, Anastasia V.; Nikolskiy, Kirill S.; Borisova, Nataliya E.; Ivanov, Alexey V.; Reshetova, Marina D.; Yuzhakov, Viktor I.; Patsaeva, Svetlana V.

    2016-04-01

    Imaging techniques in biology and medicine are crucial tools to obtain information on structural and functional properties of living cells and organisms. To fulfill the requirements associated with application of these techniques it appears necessary to design markers with specific characteristics. Luminescent complexes of trivalent lanthanide ions with chelating ligands are of increasing importance in biomedical applications because of their millisecond luminescence lifetime, narrow emission band, high signal-to-noise ratio and minimal photodamage to biological samples. In order to extend the available emission wavelength range the luminescent samarium chelates are highly desirable. In this study the ligands with diamides of 2,2'-bipyridin-6,6'-dicarboxylic acid were used to improve photophysical characteristics of samarium complexes. We report the luminescence characteristics of samarium complexes with novel ligands. All complexes exhibited the characteristic emission of Sm (III) ion with the lines at 565, 597, 605, 645 and 654 nm, the intensity strongly depended on the ligand. Absorption and luminescence excitation spectra of Sm (III) complexes showed main peaks in the UV range demonstrating lanthanide coordination to the ligand. The absolute lumenescence quantum yield was measured for solutions in acetonitrile with excitation at 350 nm. The largest luminescence quantum yield was found for the samarium complex Bipy 6MePy Sm (3%) being much higher that for samarium complexes reported in the literature earlier. These results prove as well that samarium chelates are potential markers for multiparametric imaging techniques.

  1. Australian manufacture of Quadramet{sup TM} (Samarium-153 EDTMP)

    Energy Technology Data Exchange (ETDEWEB)

    Wood, N.R.; Whitwell, J. [Australian Nuclear Science and Technology Organisation (ANSTO), Lucas Heights, NSW (Australia). Australian Radioisotopes

    1997-10-01

    Quadramet{sup T} (Samarium-153 EDTMP) has been shown overseas to be potentially useful in the palliation of painful osteoblastic skeletal metastases and has been approved this year for general marketing in the USA. Australian Radioisotopes (ARI) has licensed this product from the Australian patent holders, Dow Chemical. Within the facilities of ARI, a hot cell has been dedicated to this product and fitted out to manufacture it weekly on a cycle related to the operating cycle of the Australian reactor HIFAR. Due to neutron flux limitations of HIFAR, the local formulation has an elemental Samarium content up to 200{mu}g/mL whereas the overseas formulation has a level of 20-46{mu}g/mL. All other specifications of the two products are essentially the same. In 1995 and 1996 a small clinical trial with 19 patients was held which demonstrated that the pharmacokinetic behaviour was also essentially the same by measuring blood clearance rates and skeletal uptake dynamics. Soft tissue uptake was also qualitatively determined. The ARI version is now the subject of an application for general marketing within Australia. Some useful characteristics of this agent are: almost complete excretion or fixation in the skeleton within 6 hours, rapid onset of clinical effect, applicability in most cases where an abnormal diagnostic bone scan correlates with painful sites, dosage can be tailored to individual patient uptake due to easy dose measurement and retreatment is quite possible. The use of this class of agents in pain palliation continues to increase. Australian manufacture of Quadramet{sup TM} provides a further option in the management of these difficult cases

  2. Electrochemical extraction of samarium from molten chlorides in pyrochemical processes

    Energy Technology Data Exchange (ETDEWEB)

    Castrillejo, Y., E-mail: ycastril@qa.uva.es [QUIANE/Dept Quimica Analitica, F. de Ciencias, Universidad de Valladolid, Prado de la Magdalena s/n, 47005 Valladolid (Spain); Fernandez, P. [QUIANE/Dept Quimica Analitica, F. de Ciencias, Universidad de Valladolid, Prado de la Magdalena s/n, 47005 Valladolid (Spain); Medina, J. [Dept Fisica Materia Condensada Cristalografia y Mineralogia, F. de Ciencias, Universidad de Valladolid, Prado de la Magdalena s/n, 47005 Valladolid (Spain); Hernandez, P. [Centro de Investigaciones Quimicas, Universidad Autonoma del Estado de Hidalgo, Carr. Pachuca-Tulancingo Km. 4.5, C.P. 42076 Pachuca, Hidalgo (Mexico); Barrado, E. [QUIANE/Dept Quimica Analitica, F. de Ciencias, Universidad de Valladolid, Prado de la Magdalena s/n, 47005 Valladolid (Spain)

    2011-10-01

    This work concerns the electrochemical extraction of samarium from molten chlorides. In this way, the electrochemical behaviour of samarium ions has been investigated in the eutectic LiCl-KCl at the surface of tungsten, aluminium and aluminium coated tungsten electrodes. On a W inert electrode the electro-reduction of Sm(III) takes place in only one soluble-soluble electrochemical step Sm(III)/Sm(II). The electrochemical system Sm(II)/Sm(0) has not been observed within the electrochemical window, because of the prior reduction of Li(I) ions from the solvent, which inhibits the electro-extraction of Sm species from the salt on such a substrate. Sm metal in contact with the melt react to give Li(0) according to the reaction: Sm(0) + 2Li(I) {r_reversible} Sm(II) + 2Li(0). On the contrary, on reactive Al electrodes the electrochemical system Sm(II)/Sm(0) was observed within the electroactive range. The potential shift of the redox couple is caused by the decrease of Sm activity in the metal phase due to the formation of Sm-Al alloys at the interface. The formation mechanism of the intermetallic compounds was studied in a melt containing: (i) both Sm(III) and Al(III) ions, using W and Al coated tungsten electrodes, and (ii) Sm(III) ions using an Al electrode. Analysis of the samples after potentiostatic electrolysis by X-ray diffraction and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS), allowed the identification of Al{sub 3}Sm and Al{sub 2}Sm.

  3. Optical analysis of samarium doped sodium bismuth silicate glass.

    Science.gov (United States)

    Thomas, V; Sofin, R G S; Allen, M; Thomas, H; Biju, P R; Jose, G; Unnikrishnan, N V

    2017-01-15

    Samarium doped sodium bismuth silicate glass was synthesized using the melt quenching method. Detailed optical spectroscopic studies of the glassy material were carried out in the UV-Vis-NIR spectral range. Using the optical absorption spectra Judd-Ofelt (JO) parameters are derived. The calculated values of the JO parameters are utilized in evaluating the various radiative parameters such as electric dipole line strengths (Sed), radiative transition probabilities (Arad), radiative lifetimes (τrad), fluorescence branching ratios (β) and the integrated absorption cross- sections (σa) for stimulated emission from various excited states of Sm3+‡ ion. The principal fluorescence transitions are identified by recording the fluorescence spectrum. Our analysis revealed that the novel glassy system has the optimum values for the key parameters viz. spectroscopic quality factor, optical gain, stimulated emission cross section and quantum efficiency, which are required for a high performance optical amplifier. Calculated chromaticity co-ordinates (0.61, 0.38) also confirm its application potential in display devices. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Samarium Monosulfide (SmS): Reviewing Properties and Applications.

    Science.gov (United States)

    Sousanis, Andreas; Smet, Philippe F; Poelman, Dirk

    2017-08-16

    In this review, we give an overview of the properties and applications of samarium monosulfide, SmS, which has gained considerable interest as a switchable material. It shows a pressure-induced phase transition from the semiconducting to the metallic state by polishing, and it switches back to the semiconducting state by heating. The material also shows a magnetic transition, from the paramagnetic state to an antiferromagnetically ordered state. The switching behavior between the semiconducting and metallic states could be exploited in several applications, such as high density optical storage and memory materials, thermovoltaic devices, infrared sensors and more. We discuss the electronic, optical and magnetic properties of SmS, its switching behavior, as well as the thin film deposition techniques which have been used, such as e-beam evaporation and sputtering. Moreover, applications and possible ideas for future work on this material are presented. Our scope is to present the properties of SmS, which were mainly measured in bulk crystals, while at the same time we describe the possible deposition methods that will push the study of SmS to nanoscale dimensions, opening an intriguing range of applications for low-dimensional, pressure-induced semiconductor-metal transition compounds.

  5. Excitation induced spectroscopic study and quenching effect in cerium samarium codoped lithium aluminoborate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Kaur, Parvinder; Kaur, Simranpreet [Department of Physics, Guru Nanak Dev University, Amritsar 143005 (India); Singh, Gurinder Pal [Department of Physics, Khalsa College, Amritsar 143002 (India); Arora, Deepawali; Kumar, Sunil [Department of Physics, Guru Nanak Dev University, Amritsar 143005 (India); Singh, D.P., E-mail: dpsinghdr@yahoo.com [Department of Physics, Guru Nanak Dev University, Amritsar 143005 (India)

    2016-08-15

    Lithium aluminium borate host has been codoped with cerium and samarium to prepare glass by conventional melt quench technique. Their structural and spectroscopic investigation has been carried out using XRD, FTIR and density measurements. The UV‐Vis absorption spectra and fluorescence spectra (λ{sub exc}.=380 nm and 400 nm) have been studied for spectroscopic analysis. The amorphous nature of the prepared samples is shown by XRD. The density is increasing with addition of cerium at the expense of aluminium, keeping other components constant. FTIR study also shows the presence of compact and stable tetrahedral BO{sub 4} units thus supporting the density results. The UV‐ Vis absorption spectra show a shift of optical absorption edge towards longer wavelength along with an increase in intensity of peaks with rising samarium concentration. The fluorescence spectra show a blue shift and subsequent suppression of cerium peaks with addition of samarium.

  6. Effect of samarium doping on the dielectric behavior of barium zircomium titanate ceramic

    Energy Technology Data Exchange (ETDEWEB)

    Badapanda, T., E-mail: badapanda.tanmaya@gmail.com [Department of Physics, C.V. Raman College of Engineering, Bhubaneswar, Odisha-752054 (India); Sarangi, S.; Behera, B. [School of Physics, Sambalpur University, Jyoti Vihar Sambalpur, Odisha-768019 (India); Anwar, S. [Colloids and Materials Chemistry, Institute of Minerals and Materials Technology, Bhubaneswar, Odisha-751013 (India); Sinha, T. P. [Department of Physics, Bose Institute, Kolkata-700009 (India)

    2014-04-24

    Samarium doped Barium Zirconium Titanate ceramic with general formula Ba{sub 1−x}Sm{sub 2x/3}Zr{sub 0.05}Ti{sub 0.95}O{sub 3} [x=0.0,0.01,0.02,0.03,0.04] has been prepared by high energy ball milling. The X-ray diffraction (XRD) patterns confirmed that these ceramics have a single phase with perovskite-type upto x≤0.03 and a small secondary phase exist at x=0.04. The temperature dependent dielectric study shows a ferroelectric phase transition and transition temperature decreases with an increase in the Samarium content.

  7. Lithium Bromide/Water as Additives in Dearomatizing Samarium-Ketyl (Hetero)Arene Cyclizations.

    Science.gov (United States)

    Rao, Chintada Nageswara; Bentz, Christoph; Reissig, Hans-Ulrich

    2015-11-02

    New conditions for dearomatizing samarium-ketyl (hetero)arene cyclizations are reported. In many examples of these samarium diiodide-mediated reactions, lithium bromide and water can be used as additives instead of the carcinogenic and mutagenic hexamethylphosphoramide (HMPA). The best results were obtained for the cyclizations of N-acylated indole derivatives delivering the expected indolines in good yields and excellent diastereoselectivities. A new type of cyclization delivering indolyl-substituted allene derivatives is also described. The scope and limitations of the lithium bromide/water system are discussed. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. One-step synthesis of samarium-doped ceria and its CO catalysis

    Indian Academy of Sciences (India)

    The samarium-doped ceria (SDC) nanospheres were prepared by the one-step hydrothermal method and characterized by transmission electron microscope, scanning electron microscope, powder X-ray diffraction, X-ray photoelectron spectroscopy, energy-dispersive spectrometer and Raman spectra. According to the ...

  9. A spectroscopic comparison of samarium-doped LiYF4 and KY3F10

    NARCIS (Netherlands)

    Wells, J. P. R.; Sugiyama, A.; Han, T. P. J.; Gallagher, H. G.

    2000-01-01

    Laser selective excitation and fluorescence has been performed on LiYF4 and KY3F10 doped with samarium ions. In LiYF4, a single, tetragonal symmetry center associated with isovalent substitution of Sm3+ with lattice yttrium ions is present. By contrast, three Sm2+ centres and a single, tetragonal

  10. The Use of a Flexible Calix[4]arene Template to Stabilize a Cyclooctatetraindiyl Samarium-Potassium Complex

    Directory of Open Access Journals (Sweden)

    Geoffroy Guillemot

    2013-01-01

    Full Text Available A sandwich compound of cyclooctatetraendiyl (COT2− samarium-potassium was synthesized and analyzed using a flexible calix[4]arene dianion. This compound, [p-tBu-calix[4]-(OMe2(O2]arenediyl-samarium-(η8-cyclooctatetraendiyl-potassium (tetrahydrofurane3, is constructed as a linear sequence L-Sm--K-, where L, , and are specific ligands with L = O,O-dimethyl-calix[4]arene2−, = cyclo-octatetraendiyl, and = tetrahydrofurane templates.

  11. Solar nebula heterogeneity in p-process samarium and neodymium isotopes.

    Science.gov (United States)

    Andreasen, Rasmus; Sharma, Mukul

    2006-11-03

    Bulk carbonaceous chondrites display a deficit of approximately 100 parts per million (ppm) in 144Sm with respect to other meteorites and terrestrial standards, leading to a decrease in their 142Nd/144Nd ratios by approximately 11 ppm. The data require that samarium and neodymium isotopes produced by the p process associated with photodisintegration reactions in supernovae were heterogeneously distributed in the solar nebula. Other samarium and neodymium isotopes produced by rapid neutron capture (r process) in supernovae and by slow neutron capture (s process) in red giants were homogeneously distributed. The supernovae sources supplying the p- and r-process nuclides to the solar nebula were thus disconnected or only weakly connected.

  12. Samarium(II) iodide-mediated reductive annulations of ketones bearing a distal vinyl epoxide moiety

    Energy Technology Data Exchange (ETDEWEB)

    Molander, G.A.; Shakya, S.R. [Univ. of Colorado, Boulder, CO (United States)

    1996-08-23

    It was found that samarium (II) iodide promotes the intramolecular coupling of ketones with distal epoxy olefins while in the presence of hexamethylphosphoramide (HPMA). A number of epoxide compounds (1 a-k) fragment to form carbocycles with allylic alcohol side chains with high diastereoselectivity (2 a-k). Substituting tetramethylguanidine for HPMA reduces the diastereoselectivity. Adding Pd(0) as a catalyst reverses the diastereoselective sense. 40 refs., 1 tab.

  13. A temporal three-dimensional simulation of samarium release in the ionosphere

    Science.gov (United States)

    Zhao, Hai-Sheng; Feng, Jie; Xu, Zheng-Wen; Wu, Jian; Wu, Zhen-Sen; Xu, Bin; Xue, Kun; Xu, Tong; Hu, Yan-Li

    2016-10-01

    For understanding plasma processes of the ionosphere and magnetosphere, the alkali and alkaline-earth metals are usually released in space for artificially increasing the electron density. However, it is a limitation that these releases must be in sunlight where the photoionization can take place. In recent years, the lanthanide metals, such as samarium, have been released to produce electrons in reaction with atomic oxygen in the upper space. The reaction could proceed without sunlight so that the restriction on experimental periods is broken. Unfortunately, any sophisticated models even preliminary ones are unavailable yet in the literature. A temporal three-dimensional model is presented for the samarium release in detail with respect to various altitudes and mass. Especially, the plasma diffusion equation is remarkably extended from 2-D to 3-D by importing the influence of geomagnetic declination, which could be also useful for other chemical releases. The field-aligned terms are brought so as to the presented model can describe the diffusion along the geomagnetic field subtly. On the basis of the presented model, behaviors of radio waves propagating through the release area are simulated by using ray tracing. This model could be as the theoretical support for samarium releases, and it also helpful for the research on the generation and evolution of the ionosphere irregularities.

  14. Liquid–liquid anion exchange extraction studies of samarium(III from salicylate media using high molecular weight amine

    Directory of Open Access Journals (Sweden)

    Aniruddha M. Mandhare

    2015-07-01

    Full Text Available Liquid–liquid extraction and separation of samarium(III were carried out by using 0.025 mol dm−3 2-octylaminopyridine(2-OAP in xylene at 298 K. The extraction behavior of samarium was studied as a function of pH, weak acid concentration, extractant concentration, diluent, and equilibration time. Samarium was quantitatively extracted at pH 7.5 to 10.0 from 0.01 mol dm−3 sodium salicylate solution with 0.025 mol dm−3 2-OAP. The possible composition of the extracted species in organic phase has been determined by using model of slope analysis method and extraction mechanism was found to proceed via an anion exchange mechanism. The stripping efficiency was found to be quantitative in HNO3, HCl and CH3COOH. The robustness of the procedure was demonstrated by the average recoveries obtained (>99.6% for samarium(III extraction in the presence of several cations and anions which are commonly associated with it. The proposed method facilitates the separation and determination of samarium(III from binary and synthetic mixtures. The various thermodynamic functions like free energy (ΔG, enthalpy (ΔH and entropy (ΔS of extraction mechanism were discussed.

  15. Samarium(II) iodide-mediated intramolecular conjugate additions of alpha,beta-unsaturated lactones.

    Science.gov (United States)

    Molander, Gary A; St Jean, David J

    2002-05-31

    Samarium(II) iodide, in the presence of catalytic amounts of nickel(II) iodide, has been used to promote intramolecular conjugate additions of alkyl halides onto alpha,beta-unsaturated lactones. This process has been shown to be applicable to a number of alpha,beta-unsaturated lactones, including tetrasubstituted olefins, and has been demonstrated to be quite general for the formation of saturated bicyclic and tricyclic lactones. The method presented herein provides a mild, efficient process to form structurally complex lactones from simple precursors.

  16. Ekstraksi Pemisahan Neodimium dari Samarium, Itrium dan Praseodimium Memakai Tri Butil Fosfat

    Directory of Open Access Journals (Sweden)

    Maria Veronica Purwani

    2017-05-01

    Full Text Available The extraction of Nd(OH3 (neodymium hydroxide concentrate containing Y (yttrium, Sm (samarium and Pr (praseodymium as product of monazite processed has been done. The purpose of this study is to determine the separation of Nd from Y, Pr and Nd Sm in Nd concentrate. The aqueous phase was concentrated Nd (OH3 in HNO3 and extractant while organic phase was Tri Butyl Phosphate (TBP in kerosene. Parameters studied were pH and concentration feed, concentration of TBP in kerosene, extraction time and stirring speed. The result showed that the optimization of separation extraction neodymium from samarium, yttrium and praseodymium in Nd(OH3 concentrated with TBP, obtained the optimum condition of pH = 0.2, concentration of feed 100 g /L, concentration of TBP in kerosene 5%, extraction time 15 minutes and stirring speed 150 rpm. With the conditions, Separation Factor (SF obtained for Nd-Y, Nd-Pr, Nd-Sm are 2.242, 4.811, 4.002 respectively, while D and extraction efficiency of Nd are 0.236 and 19.07%.

  17. X-Band Microwave Reflection Properties of Samarium/Bismuth-Substituted Barium Lanthanum Titanate Ceramics

    Science.gov (United States)

    Bahel, Shalini; Pubby, Kunal; Narang, Sukhleen Bindra

    2017-03-01

    Samarium/bismuth-substituted barium lanthanum titanate ceramics with chemical composition Ba4 (La_{1 - y - z} Smy Biz )_{9.33} Ti_{18} O_{54} ( y = 0.5, 0.7; z = 0.05, 0.10, 0.15), intended as microwave reflecting materials, have been investigated in microwave X-band (8.2 GHz to 12.4 GHz) and the effect of substitution on their dielectric properties, i.e., dielectric constant and dielectric loss tangent, has been studied by vector network analyzer. Dielectric analysis showed that the dielectric constant increased with increasing samarium as well as bismuth content. Dielectric relaxation was observed for all samples in the scanned frequency range. Microwave reflection and transmission analysis of ceramic pellets of thickness 4 mm was carried out using two methods, i.e., open- and short-circuit approach, both indicating very high values of reflected power and very low values of transmitted power for all the doped materials in comparison with the base composition. The doped compositions are therefore potential microwave shielding materials for use in anechoic chambers, microwave laboratories, and radar equipment. Double-layer reflectors are also proposed, having better reflection properties (˜99% reflection) compared with single-layer reflectors.

  18. Microstructure and hysteresis curves of samarium-holmium-iron garnet synthesized by coprecipitation

    Directory of Open Access Journals (Sweden)

    Caffarena Valeska da Rocha

    2003-01-01

    Full Text Available An investigation was made into the synthesis and magnetic properties of Sm(3-xHo xFe5O12 (samarium-holmium-iron garnet ferrite, as yet absent from the literature. The material in question was synthesized by co-precipitation, starting from hydrated chlorides of rare-earth elements and ferrous sulfate, and the mixed hydroxide co-precipitate was calcined at 1000 °C. Using PVA as a binder, rectangular cross section-shaped compacts were produced by means of steel-die pressing, drying and sintering from 1200 to 1450 °C. The main conclusions of this study were that the coercive force decreases as the sintering temperature increases, and that the effect of substituting holmium for samarium in SmIG is entirely different from that provided by replacing yttrium by gadolinium in YIG, which is the most important result of this work. An in-depth investigation will be necessary to determine the correlation between microstructure/magnetic properties and ceramic processing variables.

  19. Bone-seeking radiopharmaceuticals as targeted agents of osteosarcoma: samarium-153-EDTMP and radium-223.

    Science.gov (United States)

    Anderson, Peter M; Subbiah, Vivek; Rohren, Eric

    2014-01-01

    Osteosarcoma is a cancer characterized by formation of bone by malignant cells. Routine bone scan imaging with Tc-99m-MDP is done at diagnosis to evaluate primary tumor uptake and check for bone metastases. At time of relapse the Tc-99m-MDP bone scan also provides a specific means to assess formation of bone by malignant osteosarcoma cells and the potential for bone-seeking radiopharmaceuticals to deliver radioactivity directly into osteoblastic osteosarcoma lesions. This chapter will review and compare a bone-seeking radiopharmaceutical that emits beta-particles, samarium-153-EDTMP, with an alpha-particle emitter, radium-223. The charged alpha particles from radium-223 have far more mass and energy than beta particles (electrons) from Sm-153-EDTMP. Because radium-223 has less marrow toxicity and more radiobiological effectiveness, especially if inside the bone forming cancer cell than samarium-153-EDTMP, radium-223 may have greater potential to become widely used against osteosarcoma as a targeted therapy. Radium-223 also has more potential to be used with chemotherapy against osteosarcoma and bone metastases. Because osteosarcoma makes bone and radium-223 acts like calcium, this radiopharmaceutical could possibly become a new targeted means to achieve safe and effective reduction of tumor burden as well as facilitate better surgery and/or radiotherapy for difficult to resect large, or metastatic tumors.

  20. Polypyrrole-coated samarium oxide nanobelts: fabrication, characterization, and application in supercapacitors

    Science.gov (United States)

    Liu, Peng; Wang, Yunjiao; Wang, Xue; Yang, Chao; Yi, Yanfeng

    2012-11-01

    Polypyrrole-coated samarium oxide nanobelts were synthesized by the in situ chemical oxidative surface polymerization technique based on the self-assembly of pyrrole on the surface of the amine-functionalized Sm2O3 nanobelts. The morphologies of the polypyrrole/samarium oxide (PPy/Sm2O3) nanocomposites were characterized using transmission electron microscope. The UV-vis absorbance of these samples was also investigated, and the remarkable enhancement was clearly observed. The electrochemical behaviors of the PPy/Sm2O3 composites were investigated by cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge-discharge. The results indicated that the PPy/Sm2O3 composite electrode was fully reversible and achieved a very fast Faradaic reaction. After being corrected into the weight percentage of the PPy/Sm2O3 composite at a current density of 20 mA cm-2 in a 1.0 M NaNO3 electrolyte solution, a maximum discharge capacity of 771 F g-1 was achieved in a half-cell setup configuration for the PPy/Sm2O3 composites electrode with the potential application to electrode materials for electrochemical capacitors.

  1. Polypyrrole-coated samarium oxide nanobelts: fabrication, characterization, and application in supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Liu Peng, E-mail: pliu@lzu.edu.cn; Wang Yunjiao; Wang Xue; Yang Chao; Yi Yanfeng [College of Chemistry and Chemical Engineering, Lanzhou University, Key Laboratory of Nonferrous Metal Chemistry and Resources Utilization of Gansu Province and State Key Laboratory of Applied Organic Chemistry (China)

    2012-11-15

    Polypyrrole-coated samarium oxide nanobelts were synthesized by the in situ chemical oxidative surface polymerization technique based on the self-assembly of pyrrole on the surface of the amine-functionalized Sm{sub 2}O{sub 3} nanobelts. The morphologies of the polypyrrole/samarium oxide (PPy/Sm{sub 2}O{sub 3}) nanocomposites were characterized using transmission electron microscope. The UV-vis absorbance of these samples was also investigated, and the remarkable enhancement was clearly observed. The electrochemical behaviors of the PPy/Sm{sub 2}O{sub 3} composites were investigated by cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge-discharge. The results indicated that the PPy/Sm{sub 2}O{sub 3} composite electrode was fully reversible and achieved a very fast Faradaic reaction. After being corrected into the weight percentage of the PPy/Sm{sub 2}O{sub 3} composite at a current density of 20 mA cm{sup -2} in a 1.0 M NaNO{sub 3} electrolyte solution, a maximum discharge capacity of 771 F g{sup -1} was achieved in a half-cell setup configuration for the PPy/Sm{sub 2}O{sub 3} composites electrode with the potential application to electrode materials for electrochemical capacitors.

  2. Behavior of Samarium III during the sorption process; Comportamiento del Samario-III durante el proceso de sorcion

    Energy Technology Data Exchange (ETDEWEB)

    Ordonez R, E.; Garcia G, N.; Garcia R, G. [ININ, Carr. Mexico-Toluca Km 36.5, Salazar, Estado de Mexico (Mexico)]. e-mail: edo@nuclear.inin.mx

    2004-07-01

    In this work the results of the behavior of samarium in solution are presented, in front of a fine powder of zirconium silicate (zircon). For that which is necessary to characterize the zircon, studying the crystallinity, the morphology, the surface area and the isoelectric point. The behavior of samarium in solution is studied by means of the elaboration of isotherm of sorption, using the technique by lots. One observes that to pH values of nearer to the isoelectric point (pH = 7.23) the process of sorption of the samarium begins, reaching a maximum to near pH at 9. The technique of luminescence is used to determine the concentration of the sipped samarium (phosphorescence) and also to make the speciation of the species formed in the surface of the zircon (phosphorescence). The results can be extrapolated with the plutonium when making the modeling of the migration of alpha emitting coming from the repositories of radioactive waste since both they have similar chemical properties (they are homologous). (Author)

  3. Neutron and Charged-Particle Induced Cross Sections for Radiochemistry in the Region of Samarium, Europium, and Gadolinium

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, R D; Kelley, K; Dietrich, F S; Bauer, R; Mustafa, M

    2004-11-30

    We have developed a set of modeled nuclear reaction cross sections for use in radiochemical diagnostics. Systematics for the input parameters required by the Hauser-Feshbach statistical model were developed and used to calculate neutron and proton induced nuclear reaction cross sections in the mass region of samarium, europium and gadolinium (62 {le} Z {le} 64, 82 {le} N {le} 96).

  4. Pemisahan Unsur Samarium dan Yttrium dari Mineral Tanah Jarang dengan Teknik Membran Cair Berpendukung (Supported Liquid Membrane

    Directory of Open Access Journals (Sweden)

    Amri Amin

    2009-06-01

    Full Text Available he increasing use of rare earth elements in high technology industries needs to be supported by developmental work for the separation of elements. The research objective is fiercely attracting and challenging considering the similarity of bath physical and chemical properties among these elements. The rate separation of samarium and yttrium elements using supported liquid membrane has been studied. Polytetrafluoroethylene (PTFE with pore size of 0.45 µm has been used as the membrane and di(2-ethylhexyl phosphate (D2EHP in hexane has been used as a carrier and nitric acid solution has been used as receiving phase. Result of experiments showed that the best separation rate of samarium and yttrium elements could be obtained at feeding phase of pH 3.0, di(2-ethylhexyl phosphate (D2EHP concentration of 0.3 M, agitation rate of 700 rpm, agitation time of 2 hours, and nitric acid and its solution concentrations of 1.0 M and 0.1 M, respectively. At this condition, separation rates of samarium and yttrium were 64.4 and 67.6%, respectively.   Keywords: liquid membrane, rare earth elements, samarium, yttrium

  5. Effects of the atomic environment on the electron binding energies in samarium

    Energy Technology Data Exchange (ETDEWEB)

    Inoyatov, A.Kh., E-mail: inoyatov@jinr.ru [Laboratory of Nuclear Problems, JINR, Dubna, Moscow Region (Russian Federation); Institute of Applied Physics, National University, Tashkent, Republic of Uzbekistan (Uzbekistan); Kovalík, A. [Laboratory of Nuclear Problems, JINR, Dubna, Moscow Region (Russian Federation); Nuclear Physics Institute of the ASCR, CZ-25068 Řež near Prague (Czech Republic); Filosofov, D.V. [Laboratory of Nuclear Problems, JINR, Dubna, Moscow Region (Russian Federation); Ryšavý, M.; Vénos, D. [Nuclear Physics Institute of the ASCR, CZ-25068 Řež near Prague (Czech Republic); Yushkevich, Yu.V.; Perevoshchikov, L.L. [Laboratory of Nuclear Problems, JINR, Dubna, Moscow Region (Russian Federation); Zhdanov, V.S. [Nuclear Physics Institute, Almaty, Republic of Kazakhstan (Kazakhstan)

    2016-02-15

    Highlights: • Eight different matrices (evaporated and implanted at 30 keV) used. • The greatest average difference in the binding energies amounted to 3.1 ± 0.1 eV. • The presence of trivalent and divalent Sm ions found in some implanted samples. • No significant differences in Sm natural atomic level widths were observed. - Abstract: Effects of the atomic environment on the L{sub 1}, L{sub 2}, L{sub 3}, M{sub 1}, M{sub 2}, M{sub 3}, and N{sub 1} electron binding energies in samarium generated in the electron capture decay of radioactive {sup 149}Eu were investigated by means of the internal conversion electron spectroscopy using the conversion electron spectrum of the 22.5 keV M1 + E2 nuclear transition in the daughter {sup 149}Sm. In this investigation, four pairs of {sup 149}Eu sources prepared by vacuum evaporation deposition and by ion implantation at 30 keV with the use of four different source backing materials, namely polycrystalline carbon, aluminium, gadolinium and platinum foils, were employed. The greatest average difference of (3.1 ± 0.1) eV in the L{sub 1}, L{sub 2}, L{sub 3}, and M{sub 1} subshell electron binding energies was observed between the {sup 149}Eu sources prepared by ion implantation into the aluminium and platinum substrates. On the other hand, minimal differences in the electron binding energies were generally found between samarium generated in the evaporated layer and in the bulk for the individual investigated source backings with the exception of the gadolinium foil. A doublet structure of all investigated conversion electron lines with the average values of 8.1 ± 0.2 eV and 1.5 ± 0.1 for the separation energy and the intensity ratio of the low-energy to high-energy components, respectively, was observed for the {sup 149}Eu sources prepared by ion implantation into the aluminium and carbon foils. This structure was presumably caused by the presence of both the trivalent and divalent Sm ions in the sources. No

  6. Multiphoton laser wave-mixing absorption spectroscopy for samarium using a graphite furnace atomizer

    Energy Technology Data Exchange (ETDEWEB)

    Maniaci, Michael J.; Tong, William G. E-mail: william.tong@sdsu.edu

    2004-07-30

    Nonlinear laser wave-mixing optical technique is presented as a sensitive atomic spectroscopic method for the analysis of rare earth elements using an unmodified commercially available graphite furnace (GF) atomizer. A simple nonplanar backward-scattering degenerate four-wave mixing optical arrangement offers sub-picogram detection sensitivity with sub-Doppler Lorentzian-broadened resolution. Nonlinear wave mixing is an unusually sensitive absorption-based optical method that offers both excellent detection sensitivity and sub-Doppler spectral resolution. A mass detection limit of 0.7 pg and a concentration detection limit of 70 pg/ml are determined for a rare earth element, samarium, using the 429.7-nm excitation line.

  7. Samarium Doped Cerium Oxide Clusters: a Study on the Modulation of Electronic Structure

    Science.gov (United States)

    Topolski, Josey E.; Kafader, Jared O.; Marrero-Colon, Vicmarie; Chick Jarrold, Caroline

    2017-06-01

    Cerium oxide is known for its use in solid oxide fuel cells due to its high ionic conductivity. The doping of trivalent samarium atoms into cerium oxide is known to enhance the ionic conductivity through the generation of additional oxygen vacancies. This study probes the electronic structure of Sm_{x}Ce_{y}O_{z} (x+y=3, z=2-4) anion and neutral clusters. Anion photoelectron spectra of these mixed metal clusters exhibit additional spectral features not present in the previously studied cerium oxide clusters. Density functional theory calculations have been used to aid interpretation of collected spectra. The results of this work can be used to inform the design of materials used for solid oxide fuel cells.

  8. Chelating Ligand-Mediated Hydrothermal Synthesis of Samarium Orthovanadate with Decavanadate as Vanadium Source

    Directory of Open Access Journals (Sweden)

    Quanguo Li

    2013-01-01

    Full Text Available A new ethylenediaminetetraacetic acid- (EDTA- mediated hydrothermal route to prepare chrysanthemum-shaped samarium orthovanadate (SmVO4 nanocrystals with decavanadate (K6V10O28·9H2O as vanadium source has been developed. The present hydrothermal approach is simple and reproducible and employs a relatively mild reaction temperature. The EDTA, pH value, and temperature of the reaction systems play important roles in determining the morphologies and growth process of the SmVO4 products. The products have been characterized by X-ray diffraction (XRD, scanning electron microscopy (SEM, Fourier transform infrared spectroscopy (FT-IR, photoluminescence spectra (PL, and UV-Vis spectroscopy.

  9. The Magnetocaloric Effect and Heat Capacity of Suspensions of High-Dispersity Samarium Ferrite

    Science.gov (United States)

    Korolev, V. V.; Aref'ev, I. M.; Ramazanova, A. G.

    2008-02-01

    The magnetocaloric effect and specific heat capacity of an aqueous suspension of samarium ferrite were determined calorimetrically over the temperature range 288-343 K in magnetic fields of 0-0.7 T. The data obtained were used to calculate changes in the magnetic component of the molar heat capacity and entropy of the magnetic phase and changes in the enthalpy of the process under an applied magnetic field. The magnetocaloric effect was found to increase nonlinearly as the magnetic field induction grew. The corresponding temperature dependences contained a maximum at 313 K related to the second-order magnetic phase transition at the Curie point. The field and temperature dependences of heat capacity contained a maximum in fields of 0.4 T and a minimum at the magnetic phase transition temperature.

  10. Preparation of hollow core/shell microspheres of hematite and its adsorption ability for samarium.

    Science.gov (United States)

    Yu, Sheng-Hui; Yao, Qi-Zhi; Zhou, Gen-Tao; Fu, Sheng-Quan

    2014-07-09

    Hollow core/shell hematite microspheres with diameter of ca. 1-2 μm have been successfully achieved by calcining the precursor composite microspheres of pyrite and polyvinylpyrrolidone (PVP) in air. The synthesized products were characterized by a wide range of techniques including powder X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), and Brunauer-Emmett-Teller (BET) gas sorptometry. Temperature- and time-dependent experiments unveil that the precursor pyrite-PVP composite microspheres finally transform into hollow core/shell hematite microspheres in air through a multistep process including the oxidation and sulfation of pyrite, combustion of PVP occluded in the precursor, desulfation, aggregation, and fusion of nanosized hematite as well as mass transportation from the interior to the exterior of the microspheres. The formation of the hollow core/shell microspheres dominantly depends on the calcination temperature under current experimental conditions, and the aggregation of hematite nanocrystals and the core shrinking during the oxidation of pyrite are responsible for the formation of the hollow structures. Moreover, the adsorption ability of the hematite for Sm(III) was also tested. The results exhibit that the hematite microspheres have good adsorption activity for trivalent samarium, and that its adsorption capacity strongly depends on the pH of the solution, and the maximum adsorption capacity for Sm(III) is 14.48 mg/g at neutral pH. As samarium is a typical member of the lanthanide series, our results suggest that the hollow hematite microspheres have potential application in removal of rare earth elements (REEs) entering the water environment.

  11. The influence of the technological parameters on the ionic conductivity of samarium doped ceria thin films

    Directory of Open Access Journals (Sweden)

    Mantas Sriubas

    2015-03-01

    Full Text Available Sm0,20Ce0,80O2 powder was used for the formation of samarium doped cerium oxide (SDC thin films using e-beam. Surface area of powder was 34.9 m2/g and particle size – 0.3-0.5 μm. Thin films were deposited using physical vapor deposition system on SiO2 and Alloy 600 substrates. 2 Å/s – 16 Å/s growth rate and 20 °C – 600 °C substrate temperature were used during the deposition. Ionic conductivity investigation revealed that the maximum ionic conductivity (1.67 S/m has the thin film deposited on 300 °C temperature substrate using 4 Å/s growth rate. Minimum ionic conductivity (0.26 S/m has thin film which was deposited on 20 °C temperature substrate using 8 Å/s growth rate. Vacancy activation energies vary in 0.87 eV – 0.97 eV range. Furthermore the calculations of crystallite size revealed that crystallite size increases with increasing substrate temperature: from 7.50 nm to 46.23 nm on SiO2 substrate and from 9.30 nm to 44.62 nm on Alloy 600 substrate. Molar concentration of samarium in initial evaporated material is 19.38 mol% and varies from 11.37 mol% to 21 mol% in formed thin films depending on technological parameters.DOI: http://dx.doi.org/10.5755/j01.ms.21.1.5700

  12. Formation of Core-Shell Nanoparticles Composed of Magnetite and Samarium Oxide in Magnetospirillum magneticum Strain RSS-1.

    Science.gov (United States)

    Shimoshige, Hirokazu; Nakajima, Yoshikata; Kobayashi, Hideki; Yanagisawa, Keiichi; Nagaoka, Yutaka; Shimamura, Shigeru; Mizuki, Toru; Inoue, Akira; Maekawa, Toru

    2017-01-01

    Magnetotactic bacteria (MTB) synthesize magnetosomes composed of membrane-enveloped magnetite (Fe3O4) or greigite (Fe3S4) particles in the cells. Recently, several studies have shown some possibilities of controlling the biomineralization process and altering the magnetic properties of magnetosomes by adding some transition metals to the culture media under various environmental conditions. Here, we successfully grow Magnetospirillum magneticum strain RSS-1, which are isolated from a freshwater environment, and find that synthesis of magnetosomes are encouraged in RSS-1 in the presence of samarium and that each core magnetic crystal composed of magnetite is covered with a thin layer of samarium oxide (Sm2O3). The present results show some possibilities of magnetic recovery of transition metals and synthesis of some novel structures composed of magnetic particles and transition metals utilizing MTB.

  13. Co-reduction of aluminium and lanthanide ions in molten fluorides: Application to cerium and samarium extraction from nuclear wastes

    Energy Technology Data Exchange (ETDEWEB)

    Gibilaro, M. [Laboratoire de Genie Chimique UMR 5503, Departement Procedes Electrochimiques, Universite de Toulouse, 31062 Toulouse Cedex 9 (France); Massot, L. [Laboratoire de Genie Chimique UMR 5503, Departement Procedes Electrochimiques, Universite de Toulouse, 31062 Toulouse Cedex 9 (France)], E-mail: massot@chimie.ups-tlse.fr; Chamelot, P.; Taxil, P. [Laboratoire de Genie Chimique UMR 5503, Departement Procedes Electrochimiques, Universite de Toulouse, 31062 Toulouse Cedex 9 (France)

    2009-09-01

    This work concerns the method of co-reduction process with aluminium ions in LiF-CaF{sub 2} medium (79-21 mol.%) on tungsten electrode for cerium and samarium extraction. Electrochemical techniques such as cyclic and square wave voltammetries, and potentiostatic electrolyses were used to study the co-reduction of CeF{sub 3} and SmF{sub 3} with AlF{sub 3}. For each of these elements, specific peaks of Al-Ce and Al-Sm alloys formation were observed by voltammetry as well as peaks of pure cerium and aluminium, and pure samarium and aluminium respectively. The difference of potential measured between the solvent reduction and the alloy formation suggests expecting an extraction efficiency of 99.99% of each lanthanide by the process. Different intermetallic compounds were obtained for different potentiostatic electrolysis and were characterised by Scanning Electron Microscopy with EDS probe. The validity of the process was verified by carrying out cerium and samarium extractions in the form of Al-Ln alloy; the extraction efficiency was 99.5% for Ce(III) and 99.4% for Sm(III)

  14. Structural and luminescence properties of samarium doped lead alumino borate glasses

    Science.gov (United States)

    Mohan, Shaweta; Kaur, Simranpreet; Singh, D. P.; Kaur, Puneet

    2017-11-01

    The study reports the effect of samarium concentration on the physical, structural and spectroscopic characteristics of samarium doped lead alumino borate glasses having composition 20PbO-(10-x)Al2O3-70B2O3-xSm2O3; x = 0.1, 0.5, 1.0 and 2.0 mol %. The glasses were fabricated by conventional melt-quenching technique and then characterized by XRD, FTIR, optical absorption and fluorescence spectra. X-ray diffraction studies confirmed the amorphous nature of the prepared glasses. FTIR spectra indicate the presence of BO3, BO4, AlO6 and a few other structural groups. Various physical properties such as density, molar volume, refractive index, rare earth ion concentration, boron-boron distance and polarizability etc. were determined using conventional methods and standard formulae. The Judd-Ofelt theory was applied on the optical absorption spectra of the glasses to evaluate the three phenomenological intensity parameters Ω2, Ω4 and Ω6. The value of Ω2 was found to be highest for glass with 1 mol% Sm2O3 and attributed to the asymmetry of the ligand field at the rare earth ion site and the rare earth oxygen (Sm-O) covalency. The calculated intensity parameters and fluorescence spectra were further used to predict the radiative transition probability (A), radiative lifetime (τR), branching ratio (βR), peak wavelength (λp), effective line widths (Δλeff) and stimulated emission cross-section (σ) for the characteristic 4G5/2 → 6H5/2, 6H7/2 and 6H9/2 transitions of the Sm3+ ion. Concentration quenching was observed for 2 mol% concentration of Sm2O3 and ascribed to energy transfer through various cross-relaxation channels between Sm3+ ions. Reasonably high values of branching ratios and stimulated emission cross-section for the prepared glasses points towards their utility in the development of visible lasers emitting in the reddish-orange spectral region. However, the glass with 1 mol% Sm2O3 was found to show better radiative properties.

  15. X-ray Induced Luminescence Spectroscopy of Samarium Doped Barium Sulfate Prepared by Sintering Method

    Science.gov (United States)

    Kumeda, T.; Maeda, K.; Shirano, Y.; Fujiwara, K.; Sakai, K.; Ikari, T.

    2015-06-01

    X-ray induced luminescence (XL) properties of phosphor materials made of samarium doped barium sulfate have been investigated. The samples were prepared by sintering method heated at 900-1250 °C for 3 hours in air from the mixture of BaSO4 and Sm2O3. The concentration of Sm were prepared from 0.01-6 at.%. In as-prepared sample, the Sm3+ was detected by photoluminescence (PL). The PL intensity is maximum about 2 at.% with Sm, and then starts decreasing. The PL intensity showed concentration quenching. The XL observed Sm2+ and Sm3+ ions. The XL was shown from the sample sintered up to 1200 °C. The XL intensity increased with Sm concentration up to 1 at.%. The intensity was almost constant larger than 1 at.% Sm. These concentration dependences is different since the X-ray energy absorbed to the host material at once, and the energy transferred to both Sm3+ and Sm2+ ions. Sm doped BaSO4 is found a host for XL phosphor materials.

  16. High-κ Samarium-Based Metal-Organic Framework for Gate Dielectric Applications.

    Science.gov (United States)

    Pathak, Abhishek; Chiou, Guan Ru; Gade, Narsinga Rao; Usman, Muhammad; Mendiratta, Shruti; Luo, Tzuoo-Tsair; Tseng, Tien Wen; Chen, Jenq-Wei; Chen, Fu-Rong; Chen, Kuei-Hsien; Chen, Li-Chyong; Lu, Kuang-Lieh

    2017-07-05

    The self-assembly of a samarium-based metal-organic framework [Sm2(bhc)(H2O)6]n (1) in good yield was achieved by reacting Sm(NO3)3·6H2O with benzenehexacarboxylic acid (bhc) in a mixture of H2O-EtOH under hydrothermal conditions. A structural analysis showed that compound 1 crystallized in a space group of Pnmn and adopted a 3D structure with (4,8) connected nets. Temperature dependent dielectric measurements showed that compound 1 behaves as a high dielectric material with a high dielectric constant (κ = 45.1) at 5 kHz and 310 K, which is comparable to the values for some of the most commonly available dielectric inorganic metal oxides such as Sm2O3, Ta2O5, HfO2, and ZrO2. In addition, electrical measurements of 1 revealed an electrical conductivity of about 2.15 × 10-7 S/cm at a frequency of 5 kHz with a low leakage current (Ileakage = 8.13 × 10-12 Amm-2). Dielectric investigations of the Sm-based MOF provide an effective path for the development of high dielectric materials in the future.

  17. Pyroelectric properties and electrical conductivity in samarium doped BiFeO 3 ceramics

    KAUST Repository

    Yao, Yingbang

    2012-06-01

    Samarium (Sm 3+) doped BiFeO 3 (BFO) ceramics were prepared by a modified solid-state-reaction method which adopted a rapid heating as well as cooling during the sintering process. The pyroelectric coefficient increased from 93 to 137 μC/m 2 K as the Sm 3+ doping level increased from 1 mol% to 8 mol%. Temperature dependence of the pyroelectric coefficient showed an abrupt decrease above 80 °C in all samples, which was associated with the increase of electrical conductivity with temperature. This electrical conduction was attributed to oxygen vacancy existing in the samples. An activation energy of ∼0.7 eV for the conduction process was found to be irrespective of the Sm 3+ doping level. On the other hand, the magnetic Néel temperature (T N) decreased with increasing Sm 3+ doping level. On the basis of our results, the effects of Sm doping level on the pyroelectric and electrical properties of the BFO were revealed. © 2011 Elsevier Ltd. All rights reserved.

  18. Characterization of luminescent samarium doped HfO{sub 2} coatings synthesized by spray pyrolysis technique

    Energy Technology Data Exchange (ETDEWEB)

    Chacon-Roa, C [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada-IPN, Legaria 694, Col. Irrigacion, C.P. 11500, Mexico D.F. (Mexico); Guzman-Mendoza, J [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada-IPN, Legaria 694, Col. Irrigacion, C.P. 11500, Mexico D.F. (Mexico); Aguilar-Frutis, M [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada-IPN, Legaria 694, Col. Irrigacion, C.P. 11500, Mexico D.F. (Mexico); Garcia-Hipolito, M [Departamento de Materiales Metalicos y Ceramicos, Instituto de Investigaciones en Materiales, Universidad Nacional Autonoma de Mexico, A.P. 70-360 Coyoacan 04510, Mexico, D.F. (Mexico); Alvarez-Fragoso, O [Departamento de Materiales Metalicos y Ceramicos, Instituto de Investigaciones en Materiales, Universidad Nacional Autonoma de Mexico, A.P. 70-360 Coyoacan 04510, Mexico, D.F. (Mexico); Falcony, C [Departamento de Fisica, CINVESTAV-IPN, A. P. 14-740, 07000 Mexico D.F. (Mexico)

    2008-01-07

    Trivalent samarium (Sm{sup 3+}) doped hafnium oxide (HfO{sub 2}) films were deposited using the spray pyrolysis deposition technique. The films were deposited on Corning glass substrates at temperatures ranging from 300 to 550 deg. C using chlorides as raw materials. Films, mostly amorphous, were obtained when deposition temperatures were below 350 deg. C. However, for temperatures higher than 400 deg. C, the films became polycrystalline, presenting the HfO{sub 2} monoclinic phase. Scanning electron microscopy of the films revealed a rough surface morphology with spherical particles. Also, electron energy dispersive analysis was performed on these films. The photoluminescence and cathodoluminescence characteristics of the HfO{sub 2} : SmCl{sub 3} films, measured at room temperature, exhibited four main bands centred at 570, 610, 652 and 716 nm, which are due to the well-known intra-4f transitions of the Sm{sup 3+} ion. It was found that the overall emission intensity rose as the deposition temperature was increased. Furthermore, a concentration quenching of the luminescence intensity was also observed.

  19. Samarium-153 EDTMP for metastatic bone pain palliation: the impact of europium impurities.

    Science.gov (United States)

    Kalef-Ezra, J A; Valakis, S T; Pallada, S

    2015-02-01

    To evaluate the impact on the radiation protection policies of the radiocontaminants in Samarium-153 ethylenediamine tetramethylene phosphonate ((153)Sm-EDTMP). The internal contamination of patients treated with (153)Sm-EDMTP for palliation of painful disseminated multiple bone metastases due to long-lived impurities was assessed by direct measurements. These measurements were coupled with dose-rate measurements close to their bodies and spectroscopic analysis of the residual activity in post-treatment radiopharmaceutical vials. Whole-body counting carried out in six patients showed a 30-81-kBq europium -152 plus europium-154 contamination. The 0.85 mean (152)Eu- to -(154)Eu activity ratio obtained by direct counting was similar to that assessed by analysis of post-treatment residual activities in twelve radiopharmaceutical vials following radiopharmaceutical injection. The long-lived radiocontaminants in the patient's bodies and the treatment wastes require modifications of the applicable radiation protection policies. Copyright © 2014 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  20. Luminescence of trivalent samarium ions in silver and tin co-doped aluminophosphate glass

    Science.gov (United States)

    Jiménez, José A.; Lysenko, Sergiy; Liu, Huimin; Sendova, Mariana

    2011-06-01

    This work presents the spectroscopic properties of trivalent samarium ions in a melt-quenched aluminophosphate glass containing silver and tin. Addition of 4 mol% of each Ag 2O and SnO into the glass system with 2 mol% Sm 2O 3 results in Sm 3+ ions luminescence under non-resonant UV excitation owing to energy transfer from single silver ions and/or twofold-coordinated Sn centers. Assessment of luminescence spectra and decay dynamics suggest the energy transfer mechanism to be essentially of the resonant radiative type. Moreover, a connection between the luminescent and structural properties of the rare-earth doped glass system was demonstrated. Raman spectroscopy characterization revealed that no significant variation in the glass matrix is induced by Sm 3+ doping at the concentration employed. A comparison was made with a structural study performed on the Eu 3+ doped system (containing 2 mol% Eu 2O 3 along with 4 mol% of each Ag 2O and SnO) where the radiative energy transfer mechanism was previously established. The data appears consistent regarding the lack of variation in glass structure upon the Eu 3+ and Sm 3+ doping in connection with the dominance of the radiative transfer in the matrix. Thermal treatment of the material leads to precipitation of Ag nanoparticles of a broad size range inside the dielectric as observed by transmission electron microspcopy. Assessment of 4G 5/2 excited state decay in Sm 3+ ions shows no influence from the silver particles.

  1. Samarium (III) adsorption on bentonite modified with N-(2-hydroxyethyl) ethylenediamine.

    Science.gov (United States)

    Li, Dandan; Chang, Xijun; Hu, Zheng; Wang, Qihui; Li, Ruijun; Chai, Xiaoli

    2011-02-15

    A new material has been synthesized using dry process to activate bentonite followed by N-(2-hydroxyethyl) ethylenediamine connecting chlorosilane coupling agent. The synthesized new material was characterized by elemental analysis, FT-IR and thermogravimetry which proved that bentonite was successfully modified. The most interesting trait of the new material was its selective adsorption for rare earth elements. A variety of conditions of the new material were investigated for adsorption. The optimal conditions were determined with respect to pH and shaking time. Samarium (Sm) was quantitatively adsorbed at pH 4 and shaking time of 2 min onto the new material. Under these conditions the maximum static adsorption capacity of Sm(III) was found to be 17.7 mg g(-1). The adsorbed Sm(III) ion were quantitatively eluted by 2.0 mL 0.1 mol L(-1) HCl and 5% CS (NH(2))(2) solution. According to IUPAC definition, the detection limit (3σ) of this method was 0.60 ng mL(-1). The relative standard deviation (RSD) under optimum conditions was less than 3% (n=8). The new material also was applied for the preconcentration of trace Sm(III) in environmental samples with satisfactory results. Copyright © 2010 Elsevier B.V. All rights reserved.

  2. Samarium oxide as a radiotracer to evaluate the in vivo biodistribution of PLGA nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Mandiwana, Vusani, E-mail: VMandiwana@csir.co.za; Kalombo, Lonji, E-mail: LKalombo@csir.co.za [Centre of Polymers and Composites, CSIR (South Africa); Venter, Kobus, E-mail: Kobus.Venter@mrc.ac.za [South African Medical Research Council (South Africa); Sathekge, Mike, E-mail: Mike.Sathekge@up.ac.za [University of Pretoria and Steve Biko Academic Hospital, Department of Nuclear Medicine (South Africa); Grobler, Anne, E-mail: Anne.Grobler@nwu.ac.za; Zeevaart, Jan Rijn, E-mail: zeevaart@necsa.co.za [North-West University, DST/NWU Preclinical Drug Development Platform (South Africa)

    2015-09-15

    Developing nanoparticulate delivery systems that will allow easy movement and localization of a drug to the target tissue and provide more controlled release of the drug in vivo is a challenge in nanomedicine. The aim of this study was to evaluate the biodistribution of poly(d,l-lactide-co-glycolide) (PLGA) nanoparticles containing samarium-153 oxide ([{sup 153}Sm]Sm{sub 2}O{sub 3}) in vivo to prove that orally administered nanoparticles alter the biodistribution of a drug. These were then activated in a nuclear reactor to produce radioactive {sup 153}Sm-loaded-PLGA nanoparticles. The nanoparticles were characterized for size, zeta potential, and morphology. The nanoparticles were orally and intravenously (IV) administered to rats in order to trace their uptake through imaging and biodistribution studies. The {sup 153}Sm-loaded-PLGA nanoparticles had an average size of 281 ± 6.3 nm and a PDI average of 0.22. The zeta potential ranged between 5 and 20 mV. The [{sup 153}Sm]Sm{sub 2}O{sub 3} loaded PLGA nanoparticles, orally administered were distributed to most organs at low levels, indicating that there was absorption of nanoparticles. While the IV injected [{sup 153}Sm]Sm{sub 2}O{sub 3}-loaded PLGA nanoparticles exhibited the highest localization of nanoparticles in the spleen (8.63 %ID/g) and liver (3.07 %ID/g), confirming that nanoparticles are rapidly removed from the blood by the RES, leading to rapid uptake in the liver and spleen. From the biodistribution data obtained, it is clear that polymeric nanoscale delivery systems would be suitable for improving permeability and thus the bioavailability of therapeutic compounds.

  3. Samarium oxide as a radiotracer to evaluate the in vivo biodistribution of PLGA nanoparticles

    Science.gov (United States)

    Mandiwana, Vusani; Kalombo, Lonji; Venter, Kobus; Sathekge, Mike; Grobler, Anne; Zeevaart, Jan Rijn

    2015-09-01

    Developing nanoparticulate delivery systems that will allow easy movement and localization of a drug to the target tissue and provide more controlled release of the drug in vivo is a challenge in nanomedicine. The aim of this study was to evaluate the biodistribution of poly( d, l-lactide- co-glycolide) (PLGA) nanoparticles containing samarium-153 oxide ([153Sm]Sm2O3) in vivo to prove that orally administered nanoparticles alter the biodistribution of a drug. These were then activated in a nuclear reactor to produce radioactive 153Sm-loaded-PLGA nanoparticles. The nanoparticles were characterized for size, zeta potential, and morphology. The nanoparticles were orally and intravenously (IV) administered to rats in order to trace their uptake through imaging and biodistribution studies. The 153Sm-loaded-PLGA nanoparticles had an average size of 281 ± 6.3 nm and a PDI average of 0.22. The zeta potential ranged between 5 and 20 mV. The [153Sm]Sm2O3 loaded PLGA nanoparticles, orally administered were distributed to most organs at low levels, indicating that there was absorption of nanoparticles. While the IV injected [153Sm]Sm2O3-loaded PLGA nanoparticles exhibited the highest localization of nanoparticles in the spleen (8.63 %ID/g) and liver (3.07 %ID/g), confirming that nanoparticles are rapidly removed from the blood by the RES, leading to rapid uptake in the liver and spleen. From the biodistribution data obtained, it is clear that polymeric nanoscale delivery systems would be suitable for improving permeability and thus the bioavailability of therapeutic compounds.

  4. Fabrication and properties of samarium doped calcium sulphate thin films using spray pyrolysis technique

    Energy Technology Data Exchange (ETDEWEB)

    Reghima, Meriem [Université Tunis El Manar, Faculté des Sciences de Tunis, Département de Physique, LR99ES13 Laboratoire de Physique de la Matière Condensée (LPMC), 2092 Tunis, Tunisie (Tunisia); Institut d' Electronique et des systèmes, Unité Mixte de Recherche 5214 UM2-CNRS (ST2i) – Université Montpellier, 860 rue de Saint Priest, Bâtiment 5, 34097 Montpellier (France); Faculté des Sciences de Bizerte, Université de Carthage, Zarzouna 7021 (Tunisia); Guasch, Cathy [Institut d' Electronique et des systèmes, Unité Mixte de Recherche 5214 UM2-CNRS (ST2i) – Université Montpellier, 860 rue de Saint Priest, Bâtiment 5, 34097 Montpellier (France); Azzaza, Sonia; Alleg, Safia [Laboratoire de Magnétisme et Spectroscopie des Solides (LM2S), Département de Physique, Faculté des Sciences, Université Badji Mokhtar Annaba, B.P. 12, 23000 Annaba (Algeria); Kamoun-Turki, Najoua [Université Tunis El Manar, Faculté des Sciences de Tunis, Département de Physique, LR99ES13 Laboratoire de Physique de la Matière Condensée (LPMC), 2092 Tunis, Tunisie (Tunisia)

    2016-10-01

    Using low cost spray pyrolysis technique, polycrystalline CaSO{sub 4} thin films were successfully grown on a glass substrate with a thickness of about 1 μm. Samarium doping has been performed on CaSO{sub 4} thin films to explore luminescence properties. The characterizations of these films were carried out using X-ray diffraction, Scanning Electron Microscopy and optical measurements. The structural analyses reveal the existence of hexagonal CaSO{sub 4} phase with a (200) preferred orientation belonging to CaS compound for substrate temperatures below 350 °C. It is shown that the crystallinity of the sprayed thin films can be improved by increasing substrate temperature up to 250 °C. Warren-Averbach analysis has been applied on X-ray diffractogram to determine structural parameters involving the phase with its amount, the grain size and the lattice parameters using Maud software. The surface topography shows a rough surface covered by densely packed agglomerated clusters having faceted and hexagonal shapes. Energy dispersive microscopy measurements confirm the presence of calcium and sulfur in equal proportions as well as high percentage of oxygen. Photoluminescence at room temperature revealed that luminescence peaks are attributed to the intrinsic emission of pure CaSO{sub 4} phase. - Highlights: • Warren Averbach analysis reveal the presence of hcp structure of CaSO{sub 4} phase. • A mixture of CaSO{sub 4} and CaHO{sub 4.5}S phases has been detected for lower T{sub s}. • For increasing T{sub s}, the CaHO{sub 4.5}S phase has been disappeared. • The origin of PL peaks has been identified.

  5. Optical properties and electronic transitions of zinc oxide, ferric oxide, cerium oxide, and samarium oxide in the ultraviolet and extreme ultraviolet

    DEFF Research Database (Denmark)

    Pauly, N; Yubero, F; Espinós, J P

    2017-01-01

    Optical properties and electronic transitions of four oxides, namely zinc oxide, ferric oxide, cerium oxide, and samarium oxide, are determined in the ultraviolet and extreme ultraviolet by reflection electron energy loss spectroscopy using primary electron energies in the range 0.3-2.0 keV. This...

  6. Optical response and magnetic characteristic of samarium doped zinc phosphate glasses containing nickel nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Azmi, Siti Amlah M.; Sahar, M.R., E-mail: mrahim057@gmail.com

    2015-11-01

    A magnetic glass of composition 40ZnO–(58−x) P{sub 2}O{sub 5}–1Sm{sub 2}O{sub 3}–xNiO, with x=0.0, 1.0, 1.5 and 2.0 mol% is prepared by melt-quenching technique. The glass is characterized by X-ray diffraction, high-resolution transmission electron microscope (HRTEM), photoluminescence (PL) spectroscopy and vibrating sample magnetometer (VSM) analysis. The X-rays diffraction confirms the amorphous nature of the glass while the HRTEM analysis reveals the presence of nickel nanoparticles in the glass samples. High-resolution TEM reveals that the lattice spacing of nickel nanoparticles is 0.35 nm at (100) plane. Photoluminescence emission shows the existence of four peaks that correspond to the transition from the upper level of {sup 4}G{sub 5/2} to the lower level of {sup 6}H{sub 5/2}, {sup 6}H{sub 7/2}, {sup 6}H{sub 9/2,} and {sup 6}H{sub 11/2.} It is observed that all peaks experience significant quenching effect with the increasing concentration of nickel nanoparticles, suggesting a strong energy transfer from excited samarium ions to the nickel ions. The glass magnetization and susceptibility at 12 kOe at room temperature are found to be in the range of (3.87±0.17×10{sup −2}–7.19±0.39×10{sup −2}) emu/g and (3.24±0.16×10{sup −6}–5.99±0.29×10{sup −6}) emu/Oe g respectively. The obtained hysteresis curve indicates that the glass samples are paramagnetic materials. The studied glass can be further used towards the development of magneto-optical functional glass. - Highlights: • Sm{sup 3+} doped zinc phosphate glass embedded with Ni NPs has been prepared. • The Laue pattern and lattice spacing of Ni NPs are confirmed by HRTEM image. • The magnetic response of glasses has been studied through VSM analysis. • Enhancement factor and decay half-lifetime are investigated.

  7. Treatment of bone pain secondary to metastases using samarium-153-EDTMP

    Directory of Open Access Journals (Sweden)

    Elba Cristina Sá de Camargo Etchebehere

    Full Text Available CONTEXT: More than 50% of patients with prostate, breast or lung cancer will develop painful bone metastases. The purpose of treating bone metastases is to relieve pain, reduce the use of steroids and to maintain motion. OBJECTIVE: To evaluate the use of samarium-153-EDTMP (153Sm-EDTMP for the treatment of bone pain secondary to metastases that is refractory to clinical management. TYPE OF STUDY: Retrospective. SETTING: Division of Nuclear Medicine, Universidade Estadual de Campinas (Unicamp. METHODS: Fifty-eight patients were studied (34 males with mean age 62 years; 31 patients had prostate cancer, 20 had breast cancer, three had lung cancer, one had lung hemangioendothelioma, one had parathyroid adenocarcinoma, one had osteosarcoma and one had an unknown primary tumor. All patients had multiple bone metastases demonstrated by bone scintigraphy using 99mTc-MDP,and were treated with 153Sm-EDTMP. Response to treatment was graded as good (pain reduction of 50-100%, intermediate (25-49% and poor (0-24%. RESULTS: All patients showed good uptake of 153Sm-EDTMP by bone metastases. Among the patients with prostate cancer, intermediate or good response to therapy occurred in 80.6% (25 patients and poor response in 19.4% (6. Among the patients with breast cancer, 85% (17 showed intermediate or good response to therapy while 15% (3 showed poor response. All three patients with lung cancer showed poor response to treatment. The lung hemangioendothelioma and unknown primary lesion patients showed intermediate response to treatment; the osteosarcoma and parathyroid adenocarcinoma patients showed good response to treatment. No significant myelotoxicity occurred. DISCUSSION: Pain control is important for improving the quality of life of patients with advanced cancers. The mechanism by which pain is relieved with the use of radionuclides is still not yet completely understood, however, the treatment is simple and provides a low risk of mielotoxicity

  8. Anchoring samarium oxide nanoparticles on reduced graphene oxide for high-performance supercapacitor

    Energy Technology Data Exchange (ETDEWEB)

    Dezfuli, Amin Shiralizadeh [Center of Excellence in Electrochemistry, Faculty of Chemistry, University of Tehran, Tehran (Iran, Islamic Republic of); Ganjali, Mohammad Reza, E-mail: ganjali@khayam.ut.ac.ir [Center of Excellence in Electrochemistry, Faculty of Chemistry, University of Tehran, Tehran (Iran, Islamic Republic of); Biosensor Research Center, Endocrinology & Metabolism Molecular-Cellular Sciences Institute, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Naderi, Hamid Reza [Center of Excellence in Electrochemistry, Faculty of Chemistry, University of Tehran, Tehran (Iran, Islamic Republic of)

    2017-04-30

    Highlights: • Samarium oxide nanoparticles have been anchored on the surface of reduced graphene oxide for the first time. • Sm{sub 2}O{sub 3}/RGO nanocomposite show high capacitance, good rate and cycling performance. • Sm{sub 2}O{sub 3}/RGO nanocomposite can serve as efficient electrode material for energy storage. • The best composite electrode exhibits specific capacitance of 321 F g{sup −1} in 2 mV s{sup −1}. - Abstract: We have synthesized Sm{sub 2}O{sub 3} nanoparticles (SmNs) and anchored them onto the surface of reduced graphene oxide (RGO) through a self-assembly thereof by utilizing a facile sonochemical procedure. The nanomaterials were characterized by means of powder X-ray diffraction (XRD), Field-emission scanning electron microscopy (FE-SEM), fourier transform infrared spectroscopy (FT-IR) spectra, and X-ray photoelectron spectroscopy (XPS). As the next step, the supercapacitive behavior of the resulting nanocomposites were investigated when used as electrode material, through with cyclic voltammetric (CV), galvanostatic charge-discharge and electrochemical impedance spectroscopy (EIS) techniques. The SmNs decorated RGO (SmN-RGO) nanocomposites were found to possess a specific capacitance (SC) of 321 F g{sup −1} when used in a 0.5 M Na{sub 2}SO{sub 4} solution as an electrolyte, in a scan rate of 2 mV s{sup −1}. The SC of the SmN-RGO based electrodes were also found to be 268 F g{sup −1} at a current density of 2 A g{sup −1} through galvanostatic charge-discharge tests. The outstanding properties of the SmN-RGOs were attributed to synergy of the high charge mobility of SmNs and the flexibility of the sheets of RGOs. Additionally, the nano-composite revealed a unique cycling durability (maintaining 99% of its SC even after 4000 cycles).

  9. Effect of Current Density on Thermodynamic Properties of Nanocrystalline Palladium Capped Samarium Hydride Thin Film Switchable Mirrors

    Directory of Open Access Journals (Sweden)

    Pushpendra Kumar

    2007-01-01

    Full Text Available A 55 nm samarium film capped with a 10 nm palladium overlayer switched from a metallic reflecting to a semiconducting, transparent in visible state during ex-situ hydrogen loading via electrochemical means in 1 M KOH electrolytic aqueous solution at room temperature. The switching between metal to semiconductor was accompanied by measurement of transmittance during hydrogen loading/unloading. The effect of current density on switching and thermodynamic properties was studied between dihydride state (FCC phase and trihydride state (hexagonal phase. From the plateau of partial pressure of hydrogen at x=2.6, enthalpy of formation was calculated at different current densities. The diffusion coefficients and switching kinetics are shown to depend on applied current density.

  10. Targeted bone marrow radioablation with 153Samarium-lexidronam promotes allogeneic hematopoietic chimerism and donor-specific immunologic hyporesponsiveness.

    Science.gov (United States)

    Inverardi, Luca; Linetsky, Elina; Pileggi, Antonello; Molano, R Damaris; Serafini, Aldo; Paganelli, Giovanni; Ricordi, Camillo

    2004-03-15

    Transplantation tolerance, defined as acceptance of a graft by an otherwise fully immunocompetent host, has been an elusive goal. Although robust tolerance has been achieved by the induction of stable hematopoietic chimerism after bone marrow transplantation, lethal or sublethal radiation conditioning used to induce long-term chimerism precludes its clinical use. We studied whether targeted delivery of radiation to bone marrow could allow for bone marrow cell (BMC) engraftment, chimerism, and donor-specific tolerance in the absence of the side effects associated with external irradiation. We administered a radioactive bone-seeking compound (Samarium-Lexidronam, Quadramet, Berlex Laboratories, Wayne, NJ) together with transient T-cell costimulatory blockade to recipient mice. Allogeneic BMCs were given 7 or 14 days after preconditioning. Costimulatory blockade was obtained by the use of an anti-CD154 antibody for 4 weeks. Chimerism was assessed by flow cytometry. Mice then received donor-specific and third-party skin grafts. Graft survival was analyzed with mechanisms of donor-specific hyporesponsiveness. High levels of stable chimerism across an allogeneic barrier were achieved in mice by a single administration of Samarium-Lexidronam, transient T-cell costimulatory blockade, and BMC transplantation. A large percentage of chimeric animals retained donor-derived skin grafts for more than 120 days without requiring additional immunosuppression, suggesting that harsh cytotoxic preconditioning is not necessary to achieve stable chimerism and donor specific hyporesponsiveness. Analysis of the T-cell repertoire in chimeras indicates T-cell deletional mechanisms. These data broaden the potential use of BMC transplantation for tolerance induction and argue for its potential in treating autoimmune diseases.

  11. Sorption of samarium in soils: influence of soil properties and Sm concentration

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez-Guinart, Oriol; Salaberria, Aitor; Rigol, Anna; Vidal, Miquel [Analytical Chemistry department, Faculty of Chemistry, University of Barcelona, Marti i Franques 1-11, 08028, Barcelona (Spain)

    2014-07-01

    Due to the fact that barriers of Deep Geological Repositories (DGR) may lose efficiency before the radioisotopes present in the High Level Radioactive Waste (HLRW) completely decay, it is possible that, in the long-term, radioactive leachates may escape from the DGR and reach the soil and water compartments in the biosphere. Therefore, it is required to examine the interaction and mobility of radionuclides present in the HLRW, or their chemical analogues, to predict the impact of their eventual incorporation in the biosphere and to assess the derived risk. Although relevant data have been recently obtained for a few radionuclides in soils, there are still some important gaps for some radionuclides, such us for samarium (Sm). Sm is a lanthanide that, besides being considered as a natural analogue of actinides, may also be present in HLRW in the form of the radioactive isotope {sup 151}Sm. The main objective of this work was to obtain sorption data (K{sub d}) of {sup 151}Sm gathered from a set of soil samples physicochemical fully-characterized (pH, texture, cationic exchange capacity, soil solution cationic composition, organic matter, carbonate and metallic oxides content, etc.). Additionally, as an alternative for testing sorption capacity of radionuclides in soils is the use of the corresponding stable isotope or a chemical analogue, the influence of Sm concentration was also checked. To evaluate {sup 151}Sm sorption, batch assays were carried out for each soil sample, which consisted in a pre-equilibration step of 2 g of each soil with 50 ml of double deionised water, and a subsequent equilibration step with the same solution, but labelled with {sup 151}Sm. The activity of {sup 151}Sm in initial and final solutions was measured by liquid scintillation and K{sub d} ({sup 151}Sm) data were calculated. The reversibly sorbed fraction was estimated by the application of a single extraction test, with double deionised water, to soil residues coming from the previous

  12. Crystal growth of semiorganic complex- samarium chloride coordinated thiourea-L-tartaric acid and its studies on structure and optical characteristics

    Science.gov (United States)

    Slathia, Goldy; Singh, Harjinder; Ramya, E.; Rao, D. Narayana; Bamzai, K. K.

    2017-05-01

    The semi-organic complex of samarium chloride coordinated thiourea-L-tartaric acid (SCTLT) has been grown as a single crystal by slow evaporation technique at room temperature. For structural studies, the grown crystal was subjected to single crystal X-ray diffraction and Fourier transform infra-red (FTIR) spectroscopy. Low cut off wavelength and transparent characteristics were explored by UV-VIS optical characterization. Third-order nonlinear optical properties of grown crystal were investigated by Z-scan technique.

  13. Sorption of samarium in iron (II) and (III) phosphates in aqueous systems; Sorcion de samario en fosfatos de hierro (II) y (III) en sistemas acuosos

    Energy Technology Data Exchange (ETDEWEB)

    Diaz F, J.C

    2006-07-01

    The radioactive residues that are stored in the radioactive confinements its need to stay isolated of the environment while the radioactivity levels be noxious. An important mechanism by which the radioactive residues can to reach the environment, it is the migration of these through the underground water. That it makes necessary the investigation of reactive materials that interacting with those radionuclides and that its are able to remove them from the watery resources. The synthesis and characterization of materials that can be useful in Environmental Chemistry are very important because its characteristics are exposed and its behavior in chemical phenomena as the sorption watery medium is necessary to use it in the environmental protection. In this work it was carried out the sorption study of the samarium III ion in the iron (II) and (III) phosphate; obtaining the sorption isotherms in function of pH, of the phosphate mass and of the concentration of the samarium ion using UV-visible spectroscopy to determine the removal percentage. The developed experiments show that as much the ferrous phosphate as the ferric phosphate present a great affinity by the samarium III, for what it use like reactive material in contention walls can be very viable because it sorption capacity has overcome 90% to pH values similar to those of the underground and also mentioning that the form to obtain these materials is very economic and simple. (Author)

  14. Trace amounts of rare earth elements in high purity samarium oxide by sector field inductively coupled plasma mass spectrometry after separation by HPLC

    Energy Technology Data Exchange (ETDEWEB)

    Pedreira, W.R. [Instituto de Geociencias, Universidade de Brasilia (UnB), 70910-900 Brasilia, DF (Brazil) and Fundacao Jorge Duprat Figueiredo de Seguranca e Medicina do Trabalho (FUNDACENTRO), 05409-002 Sao Paulo, SP (Brazil)]. E-mail: walter.pedreira@fundacentro.gov.br; Queiroz, C.A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), 05508-900 Sao Paulo, SP (Brazil); Abrao, A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), 05508-900 Sao Paulo, SP (Brazil); Rocha, S.M. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), 05508-900 Sao Paulo, SP (Brazil); Vasconcellos, M.E. de [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), 05508-900 Sao Paulo, SP (Brazil); Boaventura, G.R. [Instituto de Geociencias, Universidade de Brasilia (UnB), 70910-900 Brasilia, DF (Brazil); Pimentel, M.M. [Instituto de Geociencias, Universidade de Brasilia (UnB), 70910-900 Brasilia, DF (Brazil)

    2006-07-20

    Today there is an increasing need for high purity rare earth compounds in various fields, the optical, the electronics, the ceramic, the nuclear and geochemistry. Samarium oxide has special uses in glass, phosphors, lasers and thermoelectric devices. Calcium chloride crystals treated with samarium have been employed in lasers, which produce light beams intense enough to burn metal. In general, the inductively coupled plasma mass spectrometry (ICP-MS) presents some advantages for trace element analysis, due to high sensitivity and resolution, when compared with other analytical techniques such as ICP optical emission spectrometry (ICP-OES). In this work, sector field inductively coupled plasma mass spectrometry was used. Sixteen elements (Sc, Y and 14 lanthanides) were determined selectively with the ICP-MS system using a concentration gradient method. The detection limits with the ICP-MS system were about 0.2 (La) pg mL{sup -1} to 8 (Gd) pg mL{sup -1}. The %R.S.D. of the methods varying between 0.9 and 1.5% for a set of five (n = 5) replicates was found for the IPEN's material and for the certificate reference sample. Determination of trace REEs in two high pure samarium oxides samples (IPEN and JMC) was performed. IPEN's material is highly pure (>99.99%) and was successfully analyzed without spectral interference (MO{sup +} and MOH{sup +})

  15. Effectiveness of radiation synovectomy with samarium-{sup 153} particulate hydroxyapatite in rheumatoid arthritis patients with knee synovitis: a controlled randomized double-blind trial

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Marla Francisca dos; Furtado, Rita Nely Vilar; Konai, Monique Sayuri; Natour, Jamil, E-mail: jnatour@unifesp.b [Universidade Federal de Sao Paulo (UNIFESP-EPM), Sao Paulo, SP (Brazil). Divisao de Reumatologia; Castiglioni, Mario Luiz Vieira; Marchetti, Renata Rosa [Universidade Federal de Sao Paulo (UNIFESP-EPM), Sao Paulo, SP (Brazil). Divisao de Medicina Nuclear

    2009-07-01

    Objectives: the aim of the present study was to investigate the effectiveness of Samarium{sup 153}-particulate hydroxyapatite radiation synovectomy in rheumatoid arthritis patients with chronic knee synovitis. Methods: fifty-eight rheumatoid arthritis patients (60 knees) with chronic knee synovitis participated in a controlled double-blinded trial. Patients were randomized to receive either an intra-articular injection with 40 mg triamcinolone hexacetonide alone (TH group) or 40 mg triamcinolone hexacetonide combined with 15 mCi Samarium{sup 153}-particulate hydroxyapatite (Sm/TH group). Blinded examination at baseline (T0) and at 1 (T1), 4 (T4), 12 (T12), 32 (T32), and 48 (T48) weeks post-intervention were performed on all patients and included a visual analog scale for joint pain and swelling as well as data on morning stiffness, flexion, extension, knee circumference, Likert scale of improvement, percentage of improvement, SF-36 generic quality of life questionnaire, Stanford Health Assessment Questionnaire (HAQ), Lequesne index, use of non-steroidal anti-inflammatory drugs or oral corticosteroids, events and adverse effects, calls to the physician, and hospital visits. Results: the sample was homogeneous at baseline, and there were no withdrawals. Improvement was observed in both groups in relation to T0, but no statistically significant differences between groups were observed regarding all variables at the time points studied. The Sm/TH group exhibited more adverse effects at T1 (p<0.05), but these were mild and transitory. No severe adverse effects were reported during follow-up. Conclusion: intra-articular injection of Samarium{sup 153}-particulate hydroxyapatite (15 mCi) with 40 mg of triamcinolone hexacetonide is not superior to triamcinolone hexacetonide alone for the treatment of knee synovitis in patients with rheumatoid arthritis at 1 y of follow-up. (author)

  16. The properties of samarium-doped zinc oxide/phthalocyanine structure for optoelectronics prepared by pulsed laser deposition and organic molecular evaporation

    Czech Academy of Sciences Publication Activity Database

    Novotný, Michal; Marešová, Eva; Fitl, Přemysl; Vlček, Jan; Bergmann, M.; Vondráček, Martin; Yatskiv, Roman; Bulíř, Jiří; Hubík, Pavel; Hruška, Petr; Drahokoupil, Jan; Abdellaoui, N.; Vrňata, M.; Lančok, Ján

    2016-01-01

    Roč. 122, č. 3 (2016), 1-8, č. článku 225. ISSN 0947-8396 R&D Projects: GA MŠk(CZ) LG15050; GA ČR(CZ) GAP108/11/0958; GA MŠk(CZ) LM2011029; GA ČR(CZ) GA14-10279S; GA MŠk(CZ) 7AMB14FR010 Institutional support: RVO:68378271 ; RVO:67985882 Keywords : samarium-doped zinc oxide zinc/phthalocyanine deposition * evaporation * pulsed laser deposition * thin films Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.455, year: 2016

  17. Neutron Activated Samarium-153 Microparticles for Transarterial Radioembolization of Liver Tumour with Post-Procedure Imaging Capabilities

    Science.gov (United States)

    Hashikin, Nurul Ab. Aziz; Yeong, Chai-Hong; Abdullah, Basri Johan Jeet; Ng, Kwan-Hoong; Chung, Lip-Yong; Dahalan, Rehir; Perkins, Alan Christopher

    2015-01-01

    Introduction Samarium-153 (153Sm) styrene divinylbenzene microparticles were developed as a surrogate for Yttrium-90 (90Y) microspheres in liver radioembolization therapy. Unlike the pure beta emitter 90Y, 153Sm possess both therapeutic beta and diagnostic gamma radiations, making it possible for post-procedure imaging following therapy. Methods The microparticles were prepared using commercially available cation exchange resin, Amberlite IR-120 H+ (620–830 μm), which were reduced to 20–40 μm via ball mill grinding and sieve separation. The microparticles were labelled with 152Sm via ion exchange process with 152SmCl3, prior to neutron activation to produce radioactive 153Sm through 152Sm(n,γ)153Sm reaction. Therapeutic activity of 3 GBq was referred based on the recommended activity used in 90Y-microspheres therapy. The samples were irradiated in 1.494 x 1012 n.cm-2.s-1 neutron flux for 6 h to achieve the nominal activity of 3.1 GBq.g-1. Physicochemical characterisation of the microparticles, gamma spectrometry, and in vitro radiolabelling studies were carried out to study the performance and stability of the microparticles. Results Fourier Transform Infrared (FTIR) spectroscopy of the Amberlite IR-120 resins showed unaffected functional groups, following size reduction of the beads. However, as shown by the electron microscope, the microparticles were irregular in shape. The radioactivity achieved after 6 h neutron activation was 3.104 ± 0.029 GBq. The specific activity per microparticle was 53.855 ± 0.503 Bq. Gamma spectrometry and elemental analysis showed no radioactive impurities in the samples. Radiolabelling efficiencies of 153Sm-Amberlite in distilled water and blood plasma over 48 h were excellent and higher than 95%. Conclusion The laboratory work revealed that the 153Sm-Amberlite microparticles demonstrated superior characteristics for potential use in hepatic radioembolization. PMID:26382059

  18. Preparation and examination of properties of samarium-153-EDTMP complex; Otrzymywanie chelatu kwasu etylenodiaminotetrametylenofosfonowego (EDTMP) z samarem-153 i badanie jego wlasciwosci

    Energy Technology Data Exchange (ETDEWEB)

    Nowak, M. [Institute of Atomic Energy, Otwock-Swierk (Poland); Garnuszek, P.; Lukasiewicz, A.; Wozniak, I.; Zulczyk, W. [Osrodek Badawczo-Rozwojowy Izotopow, Otwock-Swierk (Poland); Licinska, I. [Instytut Lekow, Warsaw (Poland)

    1995-12-31

    Preparation and properties of ethylenediaminetetramethylenephosphonic acid (EDTMP) as well as some properties of {sup 153}Sm-EDTMP chelate have been examined. The chelate formed by samarium-153 (46.3 h, {beta}{sup -}-decay) with EDTMP exhibits high bone uptake and can be used for treatment of disseminated, painful skeletal metastases. The purity and stability of solutions of {sup 153}Sm-EDTMP chelate were examined in a broad range of samarium concentration and {sup 153}Sm specific activity. The complex under study was examined by radio-TLC, -electrophoresis and radio-HPLC. The results obtained suggest the small size of molecules of {sup 153}Sm-EDTMP chelate as compared with molecules of ``free``EDTMP. The results of biodistribution of {sup 153}Sm-EDTMP determined in rats indicate the quick blood clearance, high deposition of radioactivity in bone and quick excretion of radioactivity into urine. No specific uptake of {sup 153}Sm-EDTMP in extra-skeletal organs was found. (author). 42 refs, 13 figs, 22 tabs.

  19. The Level of Europium-154 Contaminating Samarium-153-EDTMP Activates the Radiation Alarm System at the US Homeland Security Checkpoints

    Directory of Open Access Journals (Sweden)

    Mohammed Najeeb Al Hallak

    2009-08-01

    Full Text Available 153Sm-EDTMP is a radiopharmaceutical composed of EDTMP (ethylenediamine-tetramethylenephosphonate and Samarium-153 [1]. 153Sm-EDTMP has an affinity for skeletal tissue and concentrates in areas with increased bone turnover; thus, it is successfully used in relieving pain related to diffuse bone metastases [1]. The manufacturing process of 153Sm-EDTMP leads to contamination with 154Eu (Europium-154 [2]. A previous study only alluded to the retention of 154Eu in the bones after receiving treatment with 153Sm-EDTMP [2]. Activation of the alarm at security checkpoints after 153Sm-EDTMP therapy has not been previously reported. Two out of 15 patients who received 153Sm-EDTMP at Roger Maris Cancer Center (Fargo, N. Dak., USA activated the radiation activity sensors while passing through checkpoints; one at a US airport and the other while crossing theAmerican-Canadian border. We assume that the 154Eu which remained in the patients’ bones activated the sensors. Methods: In order to investigate this hypothesis, we obtained the consent from 3 of our 15 patients who received 153Sm-EDTMP within the previous 4 months to 2 years, including the patient who had activated the radiation alarm at the airport. The patients were scanned with a handheld detector and a gamma camera for energies from 511 keV to 1.3 MeV. Results: All three patients exhibited identical spectral images, and further analysis showed that the observed spectra are the result of 154Eu emissions. Conclusion: Depending on the detection thresholds and windows used by local and federal authorities, the remaining activity of 154Eu retained in patients who received 153Sm-EDTMP could be sufficient enough to increase the count rates above background levels and activate the sensors. At Roger Maris Cancer Center, patients are now informed of the potential consequences of 153Sm-EDTMP therapy prior to initiating treatment. In addition, patients treated with 153Sm-EDTMP at Roger Maris Cancer Center

  20. The Level of Europium-154 Contaminating Samarium-153-EDTMP Activates the Radiation Alarm System at the US Homeland Security Checkpoints.

    Science.gov (United States)

    Najeeb Al Hallak, Mohammed; McCurdy, Matt; Zouain, Nicolas; Hayes, Justin

    2009-08-28

    (153)Sm-EDTMP is a radiopharmaceutical composed of EDTMP (ethylenediamine-tetramethylenephosphonate) and Samarium-153 [1]. (153)Sm-EDTMP has an affinity for skeletal tissue and concentrates in areas with increased bone turnover; thus, it is successfully used in relieving pain related to diffuse bone metastases [1]. The manufacturing process of (153)Sm-EDTMP leads to contamination with (154)Eu (Europium-154) [2]. A previous study only alluded to the retention of (154)Eu in the bones after receiving treatment with (153)Sm-EDTMP [2]. Activation of the alarm at security checkpoints after (153)Sm-EDTMP therapy has not been previously reported. Two out of 15 patients who received (153)Sm-EDTMP at Roger Maris Cancer Center (Fargo, N. Dak., USA) activated the radiation activity sensors while passing through checkpoints; one at a US airport and the other while crossing the American-Canadian border. We assume that the (154)Eu which remained in the patients' bones activated the sensors. METHODS: In order to investigate this hypothesis, we obtained the consent from 3 of our 15 patients who received (153)Sm-EDTMP within the previous 4 months to 2 years, including the patient who had activated the radiation alarm at the airport. The patients were scanned with a handheld detector and a gamma camera for energies from 511 keV to 1.3 MeV. RESULTS: All three patients exhibited identical spectral images, and further analysis showed that the observed spectra are the result of (154)Eu emissions. CONCLUSION: Depending on the detection thresholds and windows used by local and federal authorities, the remaining activity of (154)Eu retained in patients who received (153)Sm-EDTMP could be sufficient enough to increase the count rates above background levels and activate the sensors. At Roger Maris Cancer Center, patients are now informed of the potential consequences of (153)Sm-EDTMP therapy prior to initiating treatment. In addition, patients treated with (153)Sm-EDTMP at Roger Maris Cancer

  1. Formation of a new adduct based on fullerene tris-malonate samarium salt C60-[C60(=C(COO)2)3]Sm2

    Science.gov (United States)

    Petrov, A. A.; Keskinov, V. A.; Semenov, K. N.; Charykov, N. A.; Letenko, D. G.; Nikitin, V. A.

    2017-03-01

    Gram quantities of a new adduct based on light fullerene tris-malonate samarium salt C60 [C60(=C(COO)2)3]Sm2 are obtained via the reaction of ion exchange. The obtained adduct is studied by means of electron and infrared spectroscopy, X-ray and elemental analysis, electron microscopy, and thermogravimetry. The polythermal solubility of [C60(=C(COO)2)3]Sm2 in water is determined in ampoules via saturation within 20-70°C. The composition of crystalline hydrate [C60(=C(COO)2)3]Sm2 · 36H2O, which exists in equilibrium with the saturated solution, is estimated.

  2. Biodistribution of samarium-153-EDTMP in rats treated with docetaxel Biodistribuição de EDTMP-153-samário em ratos tratados com docetaxel

    Directory of Open Access Journals (Sweden)

    Arthur Villarim Neto

    2009-02-01

    Full Text Available PURPOSE: Many patients with metastatic bone disease have to use radiopharmaceuticals associated with chemotherapy to relieve bone pain. The aim of this study was to assess the influence of docetaxel on the biodistribution of samarium-153-EDTMP in bones and other organs of rats. METHODS: Wistar male rats were randomly allocated into 2 groups of 6 rats each. The DS (docetaxel/samarium group received docetaxel (15 mg/kg intraperitoneally in two cycles 11 days apart. The S (samarium/control group rats were not treated with docetaxel. Nine days after chemotherapy, all the rats were injected with 0.1ml of samarium-153-EDTMP via orbital plexus (25µCi. After 2 hours, the animals were killed and samples of the brain, thyroid, lung, heart, stomach, colon, liver, kidney and both femurs were removed. The percentage radioactivity of each sample (% ATI/g was determined in an automatic gamma-counter (Wizard-1470, Perkin-Elmer, Finland. RESULTS: On the 9th day after the administration of the 2nd chemotherapy cycle, the rats had a significant weight loss (314.50±22.09g compared (pOBJETIVO: Muitos pacientes com metástases ósseas são tratados com radiofármacos associados com quimioterapia para alívio da dor óssea. O objetivo do trabalho foi estudar a influência do docetaxel na biodistribuição do EDTMP-153-samário nos ossos e outros órgãos de ratos. MÉTODOS: Ratos Wistar foram aleatoriamente alocados em 2 grupos de 6 animais cada. O grupo DS (docetaxel/samário recebeu docetaxel (15 mg/kg intraperitoneal em dois ciclos com 11 dias de intervalo. Os ratos do grupo S (samário/controle não foram tratados com docetaxel. Nove dias após a quimioterapia, todos os animais receberam 0,1ml de EDTMP-153-samário via plexo orbital (25µCi. Após 2 horas, os animais foram mortos e feitas biópsias de cérebro, tireóide, pulmão, coração, estômago, cólon, fígado, rim e fêmures. O percentual de radioatividade por grama (%ATI/g de tecido de cada bi

  3. Marrow irradiation with high-dose 153Samarium-EDTMP followed by chemotherapy and hematopoietic stem cell infusion for acute myelogenous leukemia.

    Science.gov (United States)

    Rodriguez, Vilmarie; Anderson, Peter M; Litzow, Mark R; Erlandson, Linda; Trotz, Barbara A; Arndt, Carola A S; Khan, Shakila P; Wiseman, Gregory A

    2006-08-01

    In four patients, aged 15 - 20 years, with high-risk acute myeloid leukemia (AML), high-dose samarium 153-labelled ethylenediaminetetramethylenephosphonate (153Sm-EDTMP) was used for targeted marrow irradiation before preparative chemotherapy conditioning regimens and allogeneic (three patients) or autologous (one patient) hematopoietic stem cell transplantation. The dose of 153Sm-EDTMP was 703 MBq/kg (n = 1) or 1110 MBq/kg (n = 3). No side-effects occurred during the 30-min infusion of 153Sm-EDTMP. Samarium - melphalan regimens were given to three patients; one had 153Sm-EDTMP - busulfan + cyclophosphamide. Total body radioactivity was below the 133 MBq safe limit before infusion of stem cells (day 14 after 153Sm-EDTMP). No hemorrhagic cystitis, nephrotoxicity or serious infections occurred. Leukocyte engraftment (white blood cell count >0.5 x 10(9)/l) occurred between 12 and 23 days after stem cell infusion (mean of 17 days). Complete cytogenetic and morphologic remission of AML was evident on follow-up marrow aspirate and biopsy specimens from all patients. In two of the four study patients, the disease remains in complete remission and the patients have an excellent quality of life (Eastern Cooperative Oncology Group performance status 0; no medications) and no organ toxicity more than 2 years and more than 4 years, respectively, after their blood and bone marrow transplantations. Thus, in adolescents and adults, 153Sm-EDTMP may provide a relatively simple and effective means for using irradiation to eliminate AML within the marrow.

  4. Synthesis of samarium complexes with the derivative binder of Schiff Quinolinic base. Characterization and photophysical study; Sintesis de complejos de samario con el ligante derivado de base de Schiff Quinolinica. Caracterizacion y estudio fotofisico

    Energy Technology Data Exchange (ETDEWEB)

    Lucas H, J.

    2016-07-01

    In this work we determined the metal: binder stoichiometry of the species formed during the UV/Vis spectrophotometric titration of the derivative binder of Schiff quinolinic base, L1 with the samarium nitrate pentahydrate in methanol. Statistical analysis of the data allowed proposing the metal: binder stoichiometry for the synthesis of the complexes which was one mole of samarium salt by 2.5 moles of binder and thus favor the formation of complexes with 1M: 1L and 1M: 2L stoichiometries. They were synthesized in aqueous-organic medium (water-ethanol), isolated and purified two complexes with stoichiometry 1 Sm: 1 L1, complex 1 and 1 Sm: 2 L1, complex 2. The overall yield of the reaction was 76%. The characterization of the formed complexes was performed by visible ultraviolet spectrometry (UV/Vis), nuclear magnetic resonance, X-ray photoelectron spectroscopy (XP S), thermal gravimetric analysis with differential scanning calorimetry (TGA/DSC), and radial distribution function. These complexes were studied by fluorescence and emission phosphorescence at variable temperature. Spectroscopic techniques used in both solution and solid demonstrated the formation and stability of these complexes. In addition XP S indicated that in both complexes the samarium retains its oxidation state 3+. Luminescence studies indicated that there is intra-binding charge transfer which decreases the transfer of light energy from the binder to the samarium. Based on the experimental results, L1 binder molecules and complexes 1 and 2 were modeled that demonstrated the proposed Nc for each complex, as well as allowed to visualize the structural arrangement of the molecules, complexes and binder. (Author)

  5. Pyrolysis result of polyethylene waste as fuel for solid oxide fuel cell with samarium doped-ceria (SDC)-carbonate as electrolyte

    Science.gov (United States)

    Syahputra, R. J. E.; Rahmawati, F.; Prameswari, A. P.; Saktian, R.

    2017-02-01

    In this research, the result of pyrolysis on polyethylene was used as fuel for a solid oxide fuel cell (SOFC). The pyrolysis result is a liquid which consists of hydrocarbon chains. According to GC-MS analysis, the hydrocarbons mainly consist of C7 to C20 hydrocarbon chain. Then, the liquid was applied to a single cell of NSDC-L | NSDC | NSDC-L. NSDC is a composite SDC (samarium doped-ceria) with sodium carbonate. Meanwhile, NSDC-L is a composite of NSDC with LiNiCuO (LNC). NSDC and LNC were analyzed by X-ray diffraction to understand their crystal structure. The result shows that presence of carbonate did not change the crystal structure of SDC. SEM EDX analysis for fuel cell before and after being loaded with polyethylene oil to get information of element diffusion to the electrolyte. Meanwhile, the conductivity properties were investigated through impedance measurement. The presence of carbonate even increases the electrical conductivity. The single cell test with the pyrolysis result of polyethylene at 300 - 600 °C, found that the highest power density is at 600 °C with the maximum power density of 0.14 mW/cm2 and open circuit voltage of 0.4 Volt. Elemental analysis at three point spots of single cell NDSC-L |NSDC|NSDC-L found that a migration of ions was occurred during fuel operation at 300 - 600 °C.

  6. Effects of some rare earth and carbonate-based co-dopants on structural and electrical properties of samarium doped ceria (SDC) electrolytes for solid oxide fuel cells

    Science.gov (United States)

    Anwar, Mustafa; Khan, Zuhair S.; Mustafa, Kamal; Rana, Akmal

    2015-09-01

    In the present study, samarium doped ceria (SDC) and SDC-based composite with the addition of K2CO3 were prepared by co-precipitation route and effects of pH of the solution and calcination temperature on microstructure of SDC and SDC-K2CO3, respectively, were investigated. Furthermore, experimentation was performed to investigate into the ionic conductivity of pure SDC by co-doping with yttrium i.e., YSDC, XRD and SEM studies show that the crystallite size and particle size of SDC increases with the increase in pH. The SEM images of all the samples of SDC synthesized at different pH values showed the irregular shaped and dispersed particles. SDC-K2CO3 was calcined at 600∘C, 700∘C and 800∘C for 4 h and XRD results showed that crystallite size increases while lattice strain, decreases with the increase in calcination temperature and no peaks were detected for K2CO3 as it is present in an amorphous form. The ionic conductivity of the electrolytes increases with the increase in temperature and SDC-K2CO3 shows the highest value of ionic conductivity as compared to SDC and YSDC. Chemical compatibility tests were performed between the co-doped electrolyte and lithiated NiO cathode at high temperature. It revealed that the couple could be used up to the temperature of 700∘C.

  7. Calculation of the Dose of Samarium-153-Ethylene Diamine Tetramethylene Phosphonate (153Sm-EDTMP as a Radiopharmaceutical for Pain Relief of bone Metastasis

    Directory of Open Access Journals (Sweden)

    Fatemeh Razghandi

    2016-04-01

    Full Text Available Introduction One of the important applications of nuclear physics in medicine is the use of radioactive elements as radiopharmaceuticals. Metastatic bone disease is the most common form of malignant bone tumors. Samarium-153-ethylene diamine tetramethylene phosphonate (153Sm-EDTMP as a radiopharmaceutical is used for pain palliation. This radiopharmaceutical usually emits beta particles, which have a high uptake in bone tissues. The purpose of this study was to calculate the radiation dose distribution of 153Sm-EDTMP in bone and other tissues, using MCNPX Monte Carlo code in the particle transport model. Materials and Methods Dose delivery to the bone was simulated by seeking radiopharmaceuticals on the bone surface. The phantom model had a simple cylindrical geometry and included bone, bone marrow, and soft tissue. Results The simulation results showed that a significant amount of radiation dose was delivered to the bone by the use of this radiopharmaceutical. Conclusion Thebone acted as a fine protective shield against rays for the bone marrow. Therefore, the trivial absorbed dose by the bone marrow caused less damage to bone-making cells. Also, the high absorbed dose of the bone could destroy cancer cells and relieve the pain in the bone.

  8. Synthesis, quality control and biological evaluation of tris[(1,10-phenanthroline)[{sup 153}Sm]samarium(III)]trithiocyanate complex as a therapeutic agent

    Energy Technology Data Exchange (ETDEWEB)

    Naseri, Z.; Kharat, A. Nemati [Tehran Univ. (Iran, Islamic Republic of). Inorganic Chemistry Dept.; Hakimi, A. [Islamic Azad Univ., Tehran (Iran, Islamic Republic of). Dept. of Nuclear Engineering, Science and Research Branch; Jalilian, A.R.; Shirvani-Arani, S.; Bahrami-Samani, A.; Ghannadi-Maragheh, M. [Nuclear Science and Technology Research Institute (NSTRI), Tehran (IR). Radiopharmaceutical Research and Development Lab (RRDL)

    2012-07-01

    Therapeutic radiopharmaceuticals are designed to deliver high doses of radiation to selected target organs or tissues with an aim of minimizing unwanted radiation to surrounding healthy tissue. In this work, [tris(1,10-phenanthroline)[{sup 153}Sm]samarium(III)]trithiocyanate ({sup 153}Sm-TPTTC) was developed for possible therapeutic properties. The cold compound, i.e. {sup nat}Sm-TPTTC was prepared and characterized by IR, UV, mass and {sup 1}H-NMR spectroscopy. {sup 153}Sm-TPTTC was prepared in two steps using [{sup 153}Sm]SmCl{sub 3}, obtained by neutron activation of an enriched {sup 152}Sm sample. Stability tests, partition coefficient determination, toxicity tests and biodistribution studies of the complex in wild-type and fibrosarcoma-bearing mice were determined. The radiolabeled complex was prepared in high radiochemical purity (> 99% precipitation method) and specific activity of 278 GBq/mmol and demonstrated significant stability at 4, 25 and 37 C (in presence of human serum). Initial complex biodistribution data showed significant liver accumulation in wild-type mice and significant tumor accumulation in fibrosarcoma-bearing mice with tumor:blood and tumor:muscle ratios of 3.55 (2 h) and 38.26 (96 h) respectively. {sup 153}Sm-TPTTC properties suggest an efficient tumor targeting agent with high tumor-avidity. Further investigation on the therapeutic properties must be conducted. (orig.)

  9. Retention capacity of samarium (III) in zircon for it possible use in retaining walls for confinement of nuclear residues; Capacidad de retencion de samario (III) en circon para su posible uso en barreras de contencion para confinamiento de residuos nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Garcia G, N

    2006-07-01

    Mexico, as country that produces part of its electric power by nuclear means, should put special emphasis in the development of technologies guided to the sure and long term confinement of the high level nuclear residuals. This work studies the capacity that has the natural zircon to retain to the samarium (III) in solution, by what due, firstly, to characterize the zircon for technical instrumental to determine the purity and characteristic of the mineral in study. The instrumental techniques that were used to carry out the physicochemical characterization were the neutron activation analysis (NAA), the infrared spectroscopy (IS), the thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), semiquantitative analysis, dispersive energy spectroscopy (EDS), X-ray diffraction (XRD) and luminescence technique. The characterization of the surface properties carries out by means of the determination of the surface area using the BET multipoint technique, acidity constants, hydration time, the determination of the point of null charge (pH{sub PCN}) and density of surface sites (D{sub s}). The luminescence techniques were useful to determine the optimal point hydration of the zircon and for the quantification of the samarium, for that here intends the development of both analysis techniques. With the adjustment of the titration curves in the FITEQL 4 package the constants of surface acidity in the solid/liquid interface were determined. To the finish of this study it was corroborated that the zircon is a mineral that presents appropriate characteristics to be proposed as a contention barrier for the deep geologic confinement. With regard to the study of adsorption that one carries out the samarium retention it is superior to 90% under the described conditions. This investigation could also be applicable in the confinement of dangerous industrial residuals. (Author)

  10. SU-C-201-06: Utility of Quantitative 3D SPECT/CT Imaging in Patient Specific Internal Dosimetry of 153-Samarium with GATE Monte Carlo Package

    Energy Technology Data Exchange (ETDEWEB)

    Fallahpoor, M; Abbasi, M [Tehran University of Medical Sciences, Vali-Asr Hospital, Tehran, Tehran (Iran, Islamic Republic of); Sen, A [University of Houston, Houston, TX (United States); Parach, A [Shahid Sadoughi University of Medical Sciences, Yazd, Yazd (Iran, Islamic Republic of); Kalantari, F [UT Southwestern Medical Center, Dallas, TX (United States)

    2015-06-15

    Purpose: Patient-specific 3-dimensional (3D) internal dosimetry in targeted radionuclide therapy is essential for efficient treatment. Two major steps to achieve reliable results are: 1) generating quantitative 3D images of radionuclide distribution and attenuation coefficients and 2) using a reliable method for dose calculation based on activity and attenuation map. In this research, internal dosimetry for 153-Samarium (153-Sm) was done by SPECT-CT images coupled GATE Monte Carlo package for internal dosimetry. Methods: A 50 years old woman with bone metastases from breast cancer was prescribed 153-Sm treatment (Gamma: 103keV and beta: 0.81MeV). A SPECT/CT scan was performed with the Siemens Simbia-T scanner. SPECT and CT images were registered using default registration software. SPECT quantification was achieved by compensating for all image degrading factors including body attenuation, Compton scattering and collimator-detector response (CDR). Triple energy window method was used to estimate and eliminate the scattered photons. Iterative ordered-subsets expectation maximization (OSEM) with correction for attenuation and distance-dependent CDR was used for image reconstruction. Bilinear energy mapping is used to convert Hounsfield units in CT image to attenuation map. Organ borders were defined by the itk-SNAP toolkit segmentation on CT image. GATE was then used for internal dose calculation. The Specific Absorbed Fractions (SAFs) and S-values were reported as MIRD schema. Results: The results showed that the largest SAFs and S-values are in osseous organs as expected. S-value for lung is the highest after spine that can be important in 153-Sm therapy. Conclusion: We presented the utility of SPECT-CT images and Monte Carlo for patient-specific dosimetry as a reliable and accurate method. It has several advantages over template-based methods or simplified dose estimation methods. With advent of high speed computers, Monte Carlo can be used for treatment planning

  11. Fabrication of catalytically active nanocrystalline samarium (Sm)-doped cerium oxide (CeO2) thin films using electron beam evaporation

    Science.gov (United States)

    Kundu, Subrata; Sutradhar, Narottam; Thangamuthu, R.; Subramanian, B.; Panda, Asit Baran; Jayachandran, M.

    2012-08-01

    Samarium (Sm)-doped cerium oxide (CeO2) thin films were fabricated using electron beam evaporation technique. The synthesized films were deposited either on glass or ITO substrates and studied their nature by annealing at different temperatures. The optical properties and other morphological studies were done by UV-Vis, XRD, XPS, SEM, EDS, and FT-IR analysis. XRD and XPS analysis clearly confirm the presence of Sm in the ceria site. From the SEM study, it was found that after annealing at high temperature ( 300 or 500 °C), the particles size was reduced due to breakdown of large aggregates of particles which is also confirmed from UV-Vis, XPS, and XRD analyses. The FT-IR study proves the presence of -COO-, -OH, or ammonium group on the particles surface. The deposition of Sm-doped CeO2 nanomaterials was found more feasible on ITO substrate compared to that of glass substrate in terms of stability and depth of film thickness. The Sm-doped CeO2 nanomaterial acts as a re-usable catalyst for the reduction of organic dye molecules in the presence of NaBH4. The catalysis rate was compared by considering the electron transfer process during the reduction. The synthesized Sm-doped CeO2 thin films might find wide variety of applications in various emerging fields like solid oxide fuel cells (SOFCs), oxygen sensor or as catalyst in different types of organic and inorganic catalytic reactions. The fabrication process is very simple, straightforward, less time consuming, and cost effective.

  12. Fabrication of catalytically active nanocrystalline samarium (Sm)-doped cerium oxide (CeO{sub 2}) thin films using electron beam evaporation

    Energy Technology Data Exchange (ETDEWEB)

    Kundu, Subrata, E-mail: skundu@cecri.res.in [Council of Scientific and Industrial Research (CSIR), Electrochemical Materials Science (ECMS) Division, Central Electrochemical Research Institute - CECRI (India); Sutradhar, Narottam [G. B. Marg, Central Salt and Marine Chemical Research Institute - CSIR (India); Thangamuthu, R.; Subramanian, B. [Council of Scientific and Industrial Research (CSIR), Electrochemical Materials Science (ECMS) Division, Central Electrochemical Research Institute - CECRI (India); Panda, Asit Baran [G. B. Marg, Central Salt and Marine Chemical Research Institute (CSIR) (India); Jayachandran, M., E-mail: mjayam54@yahoo.com [Council of Scientific and Industrial Research (CSIR), Electrochemical Materials Science (ECMS) Division, Central Electrochemical Research Institute - CECRI (India)

    2012-08-15

    Samarium (Sm)-doped cerium oxide (CeO{sub 2}) thin films were fabricated using electron beam evaporation technique. The synthesized films were deposited either on glass or ITO substrates and studied their nature by annealing at different temperatures. The optical properties and other morphological studies were done by UV-Vis, XRD, XPS, SEM, EDS, and FT-IR analysis. XRD and XPS analysis clearly confirm the presence of Sm in the ceria site. From the SEM study, it was found that after annealing at high temperature ({approx}300 or 500 Degree-Sign C), the particles size was reduced due to breakdown of large aggregates of particles which is also confirmed from UV-Vis, XPS, and XRD analyses. The FT-IR study proves the presence of -COO-, -OH, or ammonium group on the particles surface. The deposition of Sm-doped CeO{sub 2} nanomaterials was found more feasible on ITO substrate compared to that of glass substrate in terms of stability and depth of film thickness. The Sm-doped CeO{sub 2} nanomaterial acts as a re-usable catalyst for the reduction of organic dye molecules in the presence of NaBH{sub 4}. The catalysis rate was compared by considering the electron transfer process during the reduction. The synthesized Sm-doped CeO{sub 2} thin films might find wide variety of applications in various emerging fields like solid oxide fuel cells (SOFCs), oxygen sensor or as catalyst in different types of organic and inorganic catalytic reactions. The fabrication process is very simple, straightforward, less time consuming, and cost effective.Graphical Abstract.

  13. Crystal structure of monoclinic samarium and cubic europium sesquioxides and bound coherent neutron scattering lengths of the isotopes {sup 154}Sm and {sup 153}Eu

    Energy Technology Data Exchange (ETDEWEB)

    Kohlmann, Holger [Leipzig Univ. (Germany). Inst. of Inorganic Chemistry; Hein, Christina; Kautenburger, Ralf [Saarland Univ., Saarbruecken (Germany). Inorganic Solid State Chemistry; Hansen, Thomas C.; Ritter, Clemens [Institut Laue-Langevin, Grenoble (France); Doyle, Stephen [Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen (Germany). Inst. for Synchrotron Radiation (ISS)

    2016-11-01

    The crystal structures of monoclinic samarium and cubic europium sesquioxide, Sm{sub 2}O{sub 3} and Eu{sub 2}O{sub 3}, were reinvestigated by powder diffraction methods (laboratory X-ray, synchrotron, neutron). Rietveld analysis yields more precise structural parameters than previously known, especially for oxygen atoms. Interatomic distances d(Sm-O) in Sm{sub 2}O{sub 3} range from 226.3(4) to 275.9(2) pm [average 241.6(3) pm] for the monoclinic B type Sm{sub 2}O{sub 3} [space group C2/m, a = 1418.04(3) pm, b = 362.660(7) pm, c = 885.48(2) pm, β = 100.028(1) ], d(Eu-O) in Eu{sub 2}O{sub 3} from 229.9(2) to 238.8(2) pm for the cubic bixbyite (C) type [space group Ia anti 3, a = 1086.87(1) pm]. Neutron diffraction at 50 K and 2 K did not show any sign for magnetic ordering in Sm{sub 2}O{sub 3}. Isotopically enriched {sup 154}Sm{sub 2}O{sub 3} and {sup 153}Eu{sub 2}O{sub 3} were used for the neutron diffraction work because of the enormous absorption cross section of the natural isotopic mixtures for thermal neutrons. The isotopic purity was determined by inductively coupled plasma - mass spectrometry to be 98.9% for {sup 154}Sm and 99.8% for {sup 153}Eu. Advanced analysis of the neutron diffraction data suggest that the bound coherent scattering lengths of {sup 154}Sm and {sup 153}Eu need to be revised. We tentatively propose b{sub c}({sup 154}Sm) = 8.97(6) fm and b{sub c}({sup 153}Eu) = 8.85(3) fm for a neutron wavelength of 186.6 pm to be better values for these isotopes, showing up to 8% deviation from accepted literature values. It is shown that inaccurate scattering lengths may result in severe problems in crystal structure refinements causing erroneous structural details such as occupation parameters, which might be critically linked to physical properties like superconductivity in multinary oxides.

  14. Highly CO2-Tolerant Cathode for Intermediate-Temperature Solid Oxide Fuel Cells: Samarium-Doped Ceria-Protected SrCo0.85Ta0.15O3-δ Hybrid.

    Science.gov (United States)

    Li, Mengran; Zhou, Wei; Zhu, Zhonghua

    2017-01-25

    Susceptibility to CO2 is one of the major challenges for the long-term stability of the alkaline-earth-containing cathodes for intermediate-temperature solid oxide fuel cells. To alleviate the adverse effects from CO2, we incorporated samarium-stabilized ceria (SDC) into a SrCo0.85Ta0.15O3-δ (SCT15) cathode by either mechanical mixing or a wet impregnation method and evaluated their cathode performance stability in the presence of a gas mixture of 10% CO2, 21% O2, and 69% N2. We observed that the CO2 tolerance of the hybrid cathode outperforms the pure SCT15 cathode by over 5 times at 550 °C. This significant enhancement is likely attributable to the low CO2 adsorption and reactivity of the SDC protective layer, which are demonstrated through thermogravimetric analysis, energy-dispersive spectroscopy, and electrical conductivity study.

  15. Ferrites Ni{sub 0,5}Zn{sub 0,5}Fe{sub 2}O{sub 4} doped with samarium: structural analysis, morphological and electromagnetic; Ferritas Ni{sub 0,5}Zn{sub 0,5}Fe{sub 2}O{sub 4} dopada com samario: analise estrutural, morfologica e eletromagnetica

    Energy Technology Data Exchange (ETDEWEB)

    Costa, A.C.F.M.; Diniz, A.P., E-mail: anacristina@dema.ufcg.edu.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Unidade Academinca de Engenharia de Materiais; Viana, K.M.S. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, PE (Brazil). Escola de Ciencias e Tecnologia; Cornejo, D.R. [Universidade de Sao Paulo (USP), SP (Brazil). Instituto de Fisica; Kiminami, R.H.G.A. [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Departamento de Engenharia de Materiais

    2010-07-01

    This paper proposes to investigate the sintering at 1200 deg C/2h of Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2-x}Sm{sub x}O{sub 4} ferrite doped with 0.05; 0.075 e 0.1 mol of Sm synthesized by combustion reaction to evaluate the performance materials as absorbers of electromagnetic radiation. The influence of the concentration of samarium on the structure, morphology and electromagnetic properties of ferrites was studied. The resulting samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), magnetic measurements and reflectivity measurements in the frequency range between 8-12 GHz. The results showed that increasing the concentration of samarium caused a decrease in particle size of the samples, encouraging, therefore, to obtain materials with better values of magnetization and reflectivity, allowing for use as absorbers in narrow-band frequency between 9-10 GHz. (author)

  16. Retrospective evaluation of bone pain palliation after samarium-153-EDTMP therapy Avaliação retrospectiva do tratamento da dor óssea metastática com Samário-153-EDTMP

    Directory of Open Access Journals (Sweden)

    Marcelo Tatit Sapienza

    2004-01-01

    Full Text Available PURPOSE: The aim of this study was to evaluate the degree of metastatic bone pain palliation and medullar toxicity associated with samarium-153-EDTMP treatment. METHODS: Seventy-three patients with metastatic bone pain having previously undergone therapy with samarium-153-EDTMP (1 mCi/kg were retrospectively evaluated. Routine follow-up included pain evaluation and blood counts for 2 months after treatment. Pain was evaluated using a subjective scale (from 0 to 10 before and for 8 weeks after the treatment. Blood counts were obtained before treatment and once a week for 2 months during follow-up. Dosimetry, based upon the urinary excretion of the isotope, was estimated in 41 individuals, and the resulting radiation absorbed doses were correlated with hematological data. RESULTS: Reduction in pain scores of 75% to 100% was obtained in 36 patients (49%, with a decrease of 50% to 75%, 25% to 50%, and 0% to 25% in, respectively, 20 (27%, 10 (14%, and 7 (10% patients. There was no significant relationship between the pain response and location of the primary tumor (breast or prostate cancer. Mild to moderate myelosuppression was noted in 75.3% of patients, usually with hematological recovery at 8 weeks. The mean bone marrow dose was 347 ± 65 cGy, and only a weak correlation was found between absorbed dose and myelosuppression (Pearson coefficient = .4. CONCLUSIONS: Samarium-153-EDTMP is a valuable method for metastatic bone pain palliation. A mild to moderate and transitory myelosuppression is the main toxicity observed after samarium therapy, showing a weak correlation with dosimetric measures.OBJETIVO: O presente trabalho teve por objetivo avaliar o efeito paliativo da dor e a toxicidade medular associados ao tratamento com Samário-153-EDTMP em pacientes com metástases ósseas. MÉTODOS: O estudo foi realizado de forma retrospectiva, a partir do levantamento de prontuário de 178 pacientes submetidos a tratamento com 1mCi/kg de 153Sm

  17. The dynamics of the laser-induced metal-semiconductor phase transition of samarium sulfide (SmS); Die Dynamik des laserinduzierten Metall-Halbleiter-Phasenuebergangs von Samariumsulfid (SmS)

    Energy Technology Data Exchange (ETDEWEB)

    Kaempfer, Tino

    2009-12-15

    The present thesis is dedicated to the experimental study of the metal-semiconductor phase transition of samarium sulfide (SmS): Temperature- and time-resolved experiments on the characterization of the phase transition of mixed-valence SmS samples (M-SmS) are presented. The measurement of the dynamics of the laser-induced phase transition pursues via time-resolved ultrashort-time microscopy and by X-ray diffraction with sub-picosecond time resolution. The electronic and structural processes, which follow an excitation of M-SmS with infrared femtosecond laser pulses, are physically interpreted on the base of the results obtained in this thesis and model imaginations. [German] Die vorliegende Arbeit ist der experimentellen Untersuchung des Metall-Halbleiter-Phasenuebergangs von Samariumsulfid (SmS) gewidmet. Es werden temperatur- und zeitaufgeloeste Experimente zur Charakterisierung des Phasenuebergangs gemischt-valenter SmS Proben (M-SmS) vorgestellt. Die Messung der Dynamik des laserinduzierten Phasenuebergangs erfolgt ueber zeitaufgeloeste Ultrakurzzeit-Mikroskopie und durch Roentgenbeugung mit subpikosekunden Zeitaufloesung. Die elektronischen und strukturellen Prozesse, welche einer Anregung von M-SmS mit infraroten Femtosekunden-Laserpulsen folgen, werden auf der Basis der in dieser Arbeit gewonnenen Ergebnisse und Modellvorstellungen physikalisch interpretiert. (orig.)

  18. A NOVEL SAMARIUM COMPLEX WITH INTERESTING ...

    African Journals Online (AJOL)

    INTRODUCTION. Fluorescent materials, particularly blue fluorescent materials have gained strong interest because ... emitting complexes in different technical applications, such as emitting materials for organic light emitting ..... properties of three novel two-dimensional lanthanide coordination polymers with mixed aromatic ...

  19. Pyroelectric Ferroelectric and Resistivity Studies on Samarium ...

    African Journals Online (AJOL)

    Barium Strontium Sodium Niobate (Ba1-xSrx)2NaNb5O15 (BSNN) belongs to tungsten bronze ferroelectric morphotrophic phase boundary (MPB) system at x = 0.6, having large spontaneous polarisation, pyroelectric coefficient and low dielectic constant and is expected to be applicable for piezoceramic filter and ...

  20. A NOVEL SAMARIUM COMPLEX WITH INTERESTING ...

    African Journals Online (AJOL)

    emitting complexes in different technical applications, such as emitting materials for organic light emitting diodes, sensitizers in solar energy conversion, chemical sensors and so forth [6-9]. The ability of bipy to act as a rigid ..... properties of three-dimensional organic-inorganic hybrids based on α-metatungstate. Inorg. Chim.

  1. Determination of specific radioactivity of samarium-153 product. 1. Quantitative determination of samarium by spectrophotometry

    Energy Technology Data Exchange (ETDEWEB)

    Izumo, Mishiroku [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Nemoto, Masahiro [Tokyo Nuclear Service Co., Ltd., Tokyo (Japan)

    2002-03-01

    On the specific radioactivity of Sm-153 for the radiotherapy of cancers, a simple method for determination of the amount of Sm was described. The method used Arsenazo III as a colorimetric reagent. The sample irradiated in the reactor was dissolved in 1M HCl solution. A small part of it was taken and mixed with Arsenazo III at pH 3.2, and the amount of Sm was determined by the spectrophotometric method at a wavelength of 652 nm. The molar absorptivity of Sm at 652 nm was 6.6x10{sup 3} m{sup -1}{center_dot}mm{sup -1}. The error of measurement in the partial different conditions was about 2% of the value determined. The effects of impurities, Fe, Zn and Cu mixing in the Sm during operation, were clarified. (author)

  2. Radiolesão vascular como efeito deletério da braquiterapia intra-arterial com dose elevada de Samário-153 em coelhos hipercolesterolêmicos Vascular radiolesion as a deleterious effect of high-dose-rate intraarterial brachytherapy with Samarium-153 in hypercholesterolemic rabbits

    Directory of Open Access Journals (Sweden)

    Dalton Bertolim Précoma

    2006-10-01

    Full Text Available OBJETIVO: Este estudo tem por objetivo avaliar as alterações vasculares morfológicas e morfométricas induzidas pela braquiterapia com Samário-153 (153 Sm em coelhos hipercolesterolêmicos, com doses elevadas. MÉTODOS: Foram analisados 43 coelhos hipercolesterolêmicos, brancos, da raça New Zealand, e o total de 86 artérias ilíacas submetidas a lesão por balão de angioplastia. Divididos em três grupos: dois (GI irradiados com as doses de 15Gy (n=14 e 60Gy (n=36 e um grupo controle (n=36. Foram realizadas avaliação histológica morfométrica e análise histológica qualitativa para análise tecidual. RESULTADOS: Foram observadas uma redução significativa da neoproliferação intimal (NPI no GI 15 Gy (pOBJECTIVE: This study was designed to evaluate vascular morphological and morphometric changes induced by brachytherapy with samarium-153 (Sm-153 at high doses in hypercholesterolemic rabbits. METHODS: Forty-three New Zealand White hypercholesterolemic rabbits were analyzed, and the total of 86 iliac arteries underwent balloon angioplasty injury. The rabbits were divided into three different groups: two irradiation groups (IG assigned to 15 Gy (n=14 and 60 Gy (n=36 irradiation doses, respectively, and a control group (n = 36. Histomorphometric and qualitative histological analyses were performed for tissue evaluation. RESULTS: Significant reductions were found in neointimal proliferation (NIP (p< 0.0001, media area (MA (p<0.0001 and percent stenosis (p<0.0001 in the 15-Gy IG, compared to the other groups. The 60-Gy IG had the higher rate of NIP, increase in media and vessel areas (VA and percent stenosis. The 60-Gy IG also showed the greatest number of xanthomatous cells (60-Gy IG: 86.11% and 15-Gy IG: 14.29%, p<0.0001 and the highest amount of hyaline amorphous tissue (60-Gy IG:58.33% and 15-Gy IG:0%, p=0.0001 and vascular proliferation (60-Gy IG:30.56% and 15-Gy IG:0%, p=0.0221. No statistically significant differences were found

  3. Optical characteristics of transparent samarium oxide thin films ...

    Indian Academy of Sciences (India)

    2016-10-07

    Oct 7, 2016 ... 1Department of Physics, Faculty of Science, Taif University, Taif 888, Saudi Arabia. 2Department of Physics, Faculty of Education, Ain Shams University, Roxy 11757, Cairo, Egypt. 3Materials Science Unit, Department of Chemistry, Faculty of Science, Tanta University, 31725 Tanta, Egypt. 4Department of ...

  4. Optical properties of lead–tellurite glasses doped with samarium ...

    Indian Academy of Sciences (India)

    The optical properties of a new family of Sm2O3–(40–)PbO–60TeO2 glasses are investigated. The optical absorption spectra were recorded at ... The refractive index, molar refraction and polarizability of oxide ions have been calculated by using Lorentz–Lorentz relations. The non-linear variations of the above optical ...

  5. Optical properties of lead–tellurite glasses doped with samarium ...

    Indian Academy of Sciences (India)

    Administrator

    Abstract. The optical properties of a new family of xSm2O3–(40–x)PbO–60TeO2 glasses are investigated. The optical absorption spectra were recorded at room temperature in the UV-visible region. From the absorption edge studies, the values of optical bandgap energies have been evaluated. The refractive index, molar ...

  6. Measurement of radiative lifetime in atomic samarium using ...

    Indian Academy of Sciences (India)

    2014-02-08

    Feb 8, 2014 ... In this paper, we report the investigations of lifetime measurement of odd-parity energy level 19009.52 cm. −1 .... introduced by an electronic delay generator between the two Q-switch pulses of Nd-YAG laser. The slope of the .... Our values of the lifetimes are free from the common systematic errors. Thus ...

  7. A novel samarium complex with interesting photoluminescence and ...

    African Journals Online (AJOL)

    The 4,4'-Hbipy moieties, isolated nitrates and [Sm(H2O)4(NO3)3] species are held together via hydrogen bonds and p…p interactions to form a 3-D supramolecular framework. Luminescent investigation reveals a strong emission in blue region. Optical absorption spectrum of 1 reveals the presence of an optical gap of 3.60 ...

  8. Lithium samarium polyphosphate, LiSm(PO34

    Directory of Open Access Journals (Sweden)

    Dan Zhao

    2010-02-01

    Full Text Available The mixed-metal rare-earth polyphosphate LiSm(PO34 consists of a three-dimensional framework in which zigzag [(PO3n]n− chains with a periodicity of four PO4 tetrahedra are connected through Li+ and Sm3+ ions (both with 2. symmetry.

  9. Sodium samarium tetrakis(polyphosphate, NaSm(PO34

    Directory of Open Access Journals (Sweden)

    Dan Zhao

    2010-07-01

    Full Text Available NaSm(PO34 has been prepared by solid state reactions. It belongs to type II of the structural family of MILnIII(PO34 compounds (MI = alkali metal and LnIII = rare earth metal and is composed of ∞(PO3n]n− polyphosphate chains with a repeating unit of four PO4 tetrahedra. The chains extend parallel to [100] and share O atoms with irregular SmO8 polyhedra, forming a three-dimensional framework which delimits tunnels occupied by Na+ cations in a distorted octahedral environment.

  10. Isotopic Ratios of Samarium by TIMS for Nuclear Forensic Application

    Energy Technology Data Exchange (ETDEWEB)

    Louis Jean, James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Inglis, Jeremy David [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-08-08

    The isotopic ratio of Nd, Sm, and Gd can provide important information regarding fissile material (nuclear devices, reactors), neutron environment, and device yield. These studies require precise measurement of Sm isotope ratios, by either TIMS or MC-ICP-MS. There has been an increasing trend to measure smaller and smaller quantities of Sm bearing samples. In nuclear forensics 10-100 ng of Sm are needed for precise measurement. To measure sub-ng Sm samples using TIMS for nuclear forensic analysis.

  11. Synthesis of copper, silver, and samarium chalcogenides by mechanical alloying

    Energy Technology Data Exchange (ETDEWEB)

    Ohtani, T.; Maruyama, K.; Ohshima, K. [Okayama Univ. of Science (Japan). Lab. for Solid State Chemistry

    1997-03-01

    CuInX{sub 2} (X = S, Se, Te), Ag{sub 2}S, Ag{sub 2}Se, Ag{sub 3}Te{sub 2}, Ag{sub 1.9}Te, AgCuSe, Sm{sub 3}Se{sub 4}, Sm{sub 2}Se{sub 3}, and SmTe were synthesized by a mechanical alloying method, using a high-energy planetary ball mill. The compounds were obtained by milling mixtures of the elements with desired ratios in agate or Cu-Be vials for 60--180 min.

  12. Oriented growth of thin films of samarium oxide by MOCVD

    Indian Academy of Sciences (India)

    Unknown

    Abstract. Thin films of Sm2O3 have been grown on Si(100) and fused quartz by low-pressure chemical va- pour deposition using an adducted β-diketonate precursor. The films on quartz are cubic, with no preferred orientation at lower growth temperatures (~ 550°C), while they grow with a strong (111) orientation as the.

  13. 150 KVA Samarium Cobalt VSCF Starter Generator Electrical System

    Science.gov (United States)

    1978-12-01

    considerable hand labor. Addition of a provision for suitable electrical connection by the SCR manufacturer wou;d be desirable for production runs. Predicted...licen- sing the holder or any other person or corporation, or conveying any rights or permission to manufacture , use, or sell any patented invent,’n...tesile strength to contain the magnets and pole pieces up through the overspeed rating of the rotor. The cho.;en process uses maraging steel as the

  14. Optical properties of samarium doped zinc–tellurite glasses

    Indian Academy of Sciences (India)

    Glasses with the composition, (Sm2O3)(ZnO)(40–)(TeO2)(60), were prepared by conventional melt quenching method. The density, molar volume, and optical energy band gap of these glasses have been measured. The refractive index, molar refraction and polarizability of oxide ion have been calculated by using ...

  15. Contribution to the study of samarium-151 excited levels; Contribution a l'etude des niveaux excites du samarium-151

    Energy Technology Data Exchange (ETDEWEB)

    Locard, P. [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Grenoble, 38 (France)

    1967-07-01

    The nucleus of {sup 151}Sm, which has 89 neutrons, happens to be on the lower edge of the deformed nuclei of region II. Therefore, the study of its levels is very interesting for the verification of the goodness of the collective models for deformed nuclei when the deformation is small (we introduce these models in the first chapter). {sup 151}Sm has often been studied, but the direct gamma spectrum measured with a lithium drift-germanium detector (chapter 3) shows many high energy transitions which did not appear in the previous level schemes. In order to settle these transitions, we have undertaken gamma-gamma coincidence spectra (as well as sum-coincidence spectra) experiments with a scintillation spectrometer designed in our laboratory (chapter 2). The investigation of the intensities of these coincidences leads us to modify the last proposed level schemes: we suppress the levels at 405,5 and 650 keV, we add levels at 245,6 - 306,6 - 522 - 952 and 962 keV. We have also verified the multipolarities of the main transitions and measured the half-lives of a few levels (chapter 3) (we find a half-life of 1.1 {+-} 0.5 nanosecond for the level at 167,7 keV). In chapter 4, we compare our results to the predictions of the models described in chapter 1. (author) [French] Le noyau de {sup 151}Sm, qui possede 89 neutrons, se trouve a la limite inferieure des noyaux deformes de la region II. L'etude de ses niveaux excites est donc d'un interet tout particulier pour la verification de la validite des differents modeles collectifs pour les noyaux deformes, lorsque la deformation est petite (nous introduisons ces modeles dans un premier chapitre). Le {sup 151}Sm a deja fait l'objet de nombreuses etudes, mais le spectre gamma direct fait avec une jonction de germanium compense au lithium (chapitre 3), nous a montre l'existence d'un grand nombre de transitions de hautes energies qui ne sont pas placees dans les schemas proposes jusqu'a ce jour. Pour preciser la place de ces transitions, nous avons donc entrepris des experiences de coincidences gamma-gamma (et de ''spectre de somme'') a l'aide d'un ensemble de spectrometrie a scintillation realise au laboratoire (chapitre 2). L'etude des intensites de ces coincidences (chapitre 3) nous amene a modifier le dernier schema propose: nous supprimons les niveaux a 405,5 et 650 keV, nous ajoutons des niveaux a 245,6 - 306,6 - 522 - 952 et 962 keV. Nous avons egalement verifie la multipolarite des principales transitions et mesure la duree de vie de certains des niveaux (chapitre 3) (nous trouvons une periode de 1,1 {+-} 0,5) nanoseconde pour le niveau a 167,7 keV). Le chapitre 4 est enfin consacre a la comparaison de nos resultats avec les predictions des differents modeles decrits au chapitre 1. (auteur)

  16. One-step synthesis of samarium-doped ceria and its CO catalysis

    Indian Academy of Sciences (India)

    Administrator

    Key Laboratory for Special Functional Aggregate Materials of Education Ministry,. School of Chemistry and Chemical ... been flourishing since its excellent electric properties were discovered in the 1980s.1 At present SDC is ... absolute ethanol three times and dried in an electric oven at 60°C overnight, and then calcined at ...

  17. Trichloridotris{N-[phenyl(pyridin-2-ylmethylidene]hydroxylamine-κ2N,N′}samarium(III

    Directory of Open Access Journals (Sweden)

    Yahong Li

    2012-03-01

    Full Text Available The SmIII ion in the title compound, [SmCl3(C12H10N2O3], shows a coordination number of nine with a slightly distorted tricapped trigonal prismatic geometry based on a Cl3N6 donor set. The molecular structure is stabilized by three intramolecular O—H...Cl hydrogen bonds.

  18. Biological studies of samarium-153 bleomycin complex in human breast cancer murine xenografts for therapeutic applications

    Energy Technology Data Exchange (ETDEWEB)

    Bahrami-Samani, A. [Faculty of Nuclear Engineering and Physics, Amirkabir Univ. of Tech., Tehran (Iran); Ghannadi-Maragheh, M. [Faculty of Nuclear Engineering and Physics, Amirkabir Univ. of Tech., Tehran (Iran); Radiopharmaceutical Research and Development Lab. (RRDL), Nuclear Science and Technology Research Inst. (NSTRI), Tehran (Iran); Jalilian, A.R.; Mazidi, M. [Radiopharmaceutical Research and Development Lab. (RRDL), Nuclear Science and Technology Research Inst. (NSTRI), Tehran (Iran)

    2010-07-01

    In this work, a potential therapeutic DNA targeting agent, {sup 153}Sm-bleomycin complex ({sup 153}Sm-BLM), was developed and the tumor accumulation studies were performed using single photon emission computed tomography (SPECT) and scarification studies. {sup 153}Sm-BLM was prepared at optimized conditions (room temperature, 4-8 h, 0.1 mg bleomycin for 740-3700 MBq {sup 153}SmCl{sub 3}, radiochemical purity over 98%, HPLC, specific activity = 55 TBq/mmol). {sup 153}Sm-BLM was administered into human breast cancer murine xenografts and the biodistribution and imaging studies were performed up to 48 h. {sup 153}Sm-BLM demonstrated superior tumor accumulation properties in contrast with the other radiolabeled bleomycins with tumor:blood ratios of 41, 72 and 182 at 4, 24 and 48 h, respectively, and tumor:muscle ratios of 23, 33 and > 1490 at 4, 24 and 48 h, respectively, while administered intravenously. The SPECT images also demonstrated the obvious tumor uptake at the chest region of the breast-tumor bearing mice. These initial experiments demonstrate significant accumulation of {sup 153}Sm-BLM in tumor tissues. (orig.)

  19. Samarium oxide as a radiotracer to evaluate the in vivo biodistribution of PLGA nanoparticles

    CSIR Research Space (South Africa)

    Mandiwana, V

    2015-09-01

    Full Text Available .63 %ID/g) and liver (3.07 %ID/g), confirming that nanoparticles are rapidly removed from the blood by the RES, leading to rapid uptake in the liver and spleen. From the biodistribution data obtained, it is clear that polymeric nanoscale delivery systems...

  20. Nanostructured Samarium Doped Fluorapatites and Their Catalytic Activity towards Synthesis of 1,2,4-Triazoles

    National Research Council Canada - National Science Library

    Gangu, Kranthi Kumar; Maddila, Suresh; Maddila, Surya Narayana; Jonnalagadda, Sreekantha B

    2016-01-01

    ...) and their properties. The nanostructured Sm doped fluorapatites (Sm-FAp) were prepared by a co-precipitation method using four different amino acids, namely glutamic acid, aspartic acid, glycine and histidine...

  1. Samarium(III) picrate tetraethylene glycol complex: Photoluminescence study and active material in monolayer electroluminescent

    Energy Technology Data Exchange (ETDEWEB)

    Kusrini, Eny, E-mail: ekusrini@che.ui.ac.id [Department of Chemical Engineering, Faculty of Engineering, Universitas Indonesia, 16424 Depok (Indonesia); Saleh, Muhammad I. [School of Chemical Sciences, Universiti Sains Malaysia, 11800 Penang (Malaysia); Yulizar, Yoki [Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Indonesia, 16424 Depok (Indonesia); Za' aba, Noor K.; Abd. Majid, W.H. [Solid State Research Laboratory, Department of Physics, Universiti Malaya, 50603 Kuala Lumpur (Malaysia)

    2011-09-15

    A mononuclear Sm(III) complex involving Pic and EO4 (where Pic=picrate anion and EO4=tetraethylene glycol) has been studied. It shows a bright-orange emission when used as active material in a monolayer electroluminescent device of ITO/EO4-Sm-Pic/Al. The crystal structure of the complex consists of [Sm(Pic){sub 2}(H{sub 2}O)(EO4)]{sup +} cation and [Pic]{sup -} anion. The Sm(III) ion is coordinated with nine oxygen atoms from one EO4 ligand in a pentadentate mode, two Pic anions each in bidentate and monodentate modes, and one water molecule. Both the terminal alcohol groups of the acyclic EO4 ligand were involved in the O-H...O hydrogen bonding by infinite one-dimensional (1D) chain within a symmetry direction [0 1 0]. The photoluminescence (PL) spectrum of the thin film shows the typical spectral features of the Sm(III) ion ({sup 4}G{sub 5/2}{yields}{sup 6}H{sub 7/2} transitions). The root-mean-square (rms) of the roughness of thin film is 30.605 nm and indicates that the formation of the monolayer electroluminescent device is not uniform and retains a high crystallinity. Typical semiconductor current-voltage (I-V) property was also observed in this device with threshold and turn voltages of 2.8 and 6.2 V, respectively. The [Sm(Pic){sub 2}(H{sub 2}O)(EO4)](Pic).H{sub 2}O complex can be applied as a luminescent center in OLED for bright-orange emission. - Highlights: > The [Sm(Pic){sub 2}(H{sub 2}O)(EO4)](Pic).H{sub 2}O complex is crystallized in triclinic with space group P-1. > The complex is applied as a emissive center in monolayer device structure of ITO/EO4-Sm-Pic/Al. > The photoluminescence spectrum of the crystalline and thin film shows a bright-orange emission. > The current-voltage property showed the turn on voltage of 6.2 V.

  2. Pulsed laser deposition and optical characterizations of the magnetic samarium orthoferrite

    Energy Technology Data Exchange (ETDEWEB)

    Berini, Bruno, E-mail: bruno.berini@uvsq.fr [Groupe d' Etude de la Matiere Condensee (GEMAC), CNRS, Universite de Versailles St. Quentin, 45, Av. des Etats-Unis, 78035 Versailles Cedex (France); Mistrik, Jan [Institute of Applied Physics and Mathematics, Faculty of Chemical Technology, University of Pardubice, Studentska 84, 532 10 Pardubice (Czech Republic); Dumont, Yves; Popova, Elena; Fouchet, Arnaud; Scola, Joseph; Keller, Niels [Groupe d' Etude de la Matiere Condensee (GEMAC), CNRS, Universite de Versailles St. Quentin, 45, Av. des Etats-Unis, 78035 Versailles Cedex (France)

    2012-01-01

    Pulsed Laser Deposition of magnetically ordered polycrystalline SmFeO{sub 3} films has been optimized onto SiO{sub 2} glass substrates as function of substrate temperature, oxygen pressure and pulsed laser fluency. Using a KrF excimer laser, crystallization temperature is found to be about 1048 K for a weak fluency of only 1.7 J cm{sup -2}. We show that this growth temperature can be reduced using higher fluency and that it is possible to obtain a film texturation along the c axis by reducing the oxygen pressure at given temperature and fluency. In a second part, we focus on the SmFeO{sub 3} optical constants determined by in situ ellipsometry using a stacking model and the Cauchy dispersion relation for SmFeO{sub 3} layer. We show a good correlation between the transmission and reflection calculated from these data and measured by ex situ spectrophotometry in the visible range.

  3. Nanostructured Samarium Doped Fluorapatites and Their Catalytic Activity towards Synthesis of 1,2,4-Triazoles

    Directory of Open Access Journals (Sweden)

    Kranthi Kumar Gangu

    2016-09-01

    Full Text Available An investigation was conducted into the influence of the amino acids as organic modifiers in the facile synthesis of metal incorporated fluorapatites (FAp and their properties. The nanostructured Sm doped fluorapatites (Sm-FAp were prepared by a co-precipitation method using four different amino acids, namely glutamic acid, aspartic acid, glycine and histidine. The materials were characterized by various techniques including X-ray diffraction (XRD, Fourier transform infra-red spectroscopy (FT-IR, field emission scanning electron microscopy (FE-SEM, energy-dispersive X-ray spectroscopy (EDX, high resolution transmission electron microscopy (HR-TEM, N2-adsorption/desorption isotherm, temperature programmed desorption (TPD and fluorescence spectrophotometry. Under similar conditions, Sm-FAp prepared using different amino acids exhibited distinctly different morphological structures, surface area and pore properties. Their activity as catalysts was assessed and Sm-FAp/Glycine displayed excellent efficiency in the synthesis of 1,2,4-triazole catalyzing the reaction between 2-nitrobenzaldehyde and thiosemicarbazide with exceptional selectivity and 98% yield in a short time interval (10 min. The study provides an insight into the role of organic modifiers as controllers of nucleation, growth and aggregation which significantly influence the nature and activity of the catalytic sites on Sm-FAp. Sm-FAp could also have potential as photoactive material.

  4. Body composition analysis by DEXA by using dynamically changing samarium filtration

    DEFF Research Database (Denmark)

    Gotfredsen, Arne; Baeksgaard, L; Hilsted, J

    1997-01-01

    , which depends on the current-absorber thickness. With this system we found a good agreement (r = 0.99) between reference and measured amounts of tissue or fat percentages in a plastic phantom and in smaller (approximately 0.5-4 kg) and larger (approximately 5-20 kg) piles of tissue (ox muscle and lard......). Scans of six healthy volunteers covered with combinations of beef and lard (approximately 5-15 kg) showed a good agreement (r = 0.99) between reference and DEXA values of added soft tissue mass and fat percentage. We conclude that the DEXA method (and, in particular, the Norland XR-36 using dynamic...

  5. Synthesis, thermal and photoluminescent properties of ZnSe- based oxyfluoride glasses doped with samarium

    Science.gov (United States)

    Kostova, I.; Okada, G.; Pashova, T.; Tonchev, D.; Kasap, S.

    2014-12-01

    Rare earth (RE) doped glasses and glass ceramic materials have recently received considerable attention because of their potential or realized applications as X-ray intensifying screens, phosphors, detectors, waveguides, lasers etc. [1]. In this work, we present a new RE doped ZnO-ZnSe-SrF2-P2O5-B2O3-Sm2O3-SmF3 (ZSPB) glass system synthesized by melt quenching technique. The resulting glasses were visually fully transparent and stable with glass the transition temperatures around 530°C. The thermal properties of this glass system were characterized by Modulated Differential Scanning Calorimetry (MDSC) measurements before and after annealing at 650°C. We have characterized these glasses by Raman spectroscopy and photoluminescence (PL) measurements over the UV-VIS range using light emitting diodes (LED) and laser diodes (LD) excitation sources. We have also irradiated thermally treated and non-treated glass samples by X-rays and have studied the resulting PL. We discuss the results in terms of previously reported models for Sm-doped Zn-borophosphate oxide, oxyfluoride and oxyselenide glasses.

  6. Laser-Induced Luminescence Study of Samarium(III) Thiodiglycolate Complexes

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Dong Yong; Lee, Eil Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kimura, Takaumi [Japan Atomic Energy Research Institute, Ibaraki-ken (Japan)

    2003-09-15

    The hydration number of Sm(III) has been obtained by using the difference in the decay rate constants in H{sub 2}O and D{sub 2}O solutions. In general, k{sub obs}(H{sub 2}O) >> k{sub obs}(D{sub 2}O), k{sub obs}(D{sub 2}O) ≅ constant, and ligands are not as effective in causing non-radiative de-excitation of the excited state. For Sm(III), a relationship has been proposed in which the hydration number is related directly to the decay rate constant in H{sub 2}O. If there is no contribution from the ligand to the de-excitation of the luminescence excited state, the hydration of Sm(III) in the different complexes can be obtained directly from the values of k{sub obs} measured in H{sub 2}O. The number and the geometric distribution of solvent molecules around a metal ion in solution are an important factor in the structural and chemical behavior of cation. Indeed, such information has been utilized to design novel ionophores and receptors. However, there have been few studies of hydration structure for lanthanides. The fact that many f-element salts which have relatively large lattice energies are fairly soluble in water is a reflection of the strength of the interactions between the metal cations and water molecules.

  7. Oxygen Fugacity of the Martian Mantle from Pigeonite/Melt Partitioning of Samarium, Europium and Gadolinium

    Science.gov (United States)

    Musselwhite, S.; Jones, J. H.; Shearer, C.

    2004-01-01

    This study is part of an ongoing effort to calibrate the pyroxene/melt Eu oxybarometer for conditions relevant to the martian meteorites. There is fairly good agreement between a determinations using equilibria between Fe-Ti oxides and the estimates from Eu anomalies in shergottite augites in tenns of which meteorites are more or less oxidized. The Eu calibration was for angrite composition pyroxenes which are rather extreme. However, application of a calibration for martian composition augites 113 does not significantly reduce the discrepancy between the two methods. One possible reason for this discrepancy is that augites are non-liquidus. The use of pigeonite rather than augite as the oxy-barometer phase is considered. We have conducted experiments on martian composition pigeonite/melt REE partitioning as a function of fO2.

  8. Doping controlled spin reorientation in dysprosium-samarium orthoferrite single crystals

    Science.gov (United States)

    Cao, Shixun; Zhao, Weiyao; Kang, Baojuan; Zhang, Jincang; Ren, Wei

    2015-03-01

    As one of the most important phase transitions, spin reorientation (SR) in rare earth transition metal oxides draws much attention of emerging materials technologies. The origin of SR is the competition between different spin configurations which possess different free energy. We report the control of spin reorientation (SR) transition in perovskite rare earth orthoferrite Dy1-xSmxFeO3, a whole family of single crystals grown by optical floating zone method from x =0 to 1. Temperature dependence of the magnetizations under zero-field-cooling (ZFC) and field-cooling (FC) processes are studied. We have found a remarkable linear change of SR transition temperature in Sm-rich samples for x>0.2, which covers an extremely wide temperature range including room temperature. The a-axis magnetization curves under FCC process bifurcate from and then jump down to that of warming process (ZFC and FCW curves) in single crystals when x =0.5-0.9, suggesting complicated 4f-3d electron interactions among Dy3+-Sm3+, Dy3+-Fe3+, and Sm3+-Fe3+ sublattices of diverse magnetic configurations for materials physics and design. The magnetic properties and the doping effect on SR transition temperature in these single crystals might be useful in the spintronics device application. This work is supported by the National Key Basic Research Program of China (Grant No. 2015CB921600), and the National Natural Science Foundation of China (NSFC, Nos. 51372149, 50932003, 11274222).

  9. Synthesis, crystal structure and luminescent properties of a new samarium-fluorescein metal-organic framework

    Science.gov (United States)

    Thomas, Jesty; Ambili, K. S.

    2015-10-01

    A new metal-organic framework with empirical formula C43H30NO12Sm was solvothermally synthesized using SmCl3, fluorescein and N, N-Dimethyl formamide (DMF) and characterized by single crystal X-ray diffraction, powder X-ray diffraction, infrared spectroscopy, UV-Visible spectroscopy, scanning electron microscopy, optical microscopy, photoluminescence spectroscopy, CHN elemental analysis and thermogravimetric analysis. Single crystal X-ray diffraction revealed that the crystal structure belongs to the triclinic system, P-1 space group with a = 12.113 (6) Å, b = 12.1734 (7) Å, c = 13.2760(8) Å, α = 67.930(3)⁰, β = 87.779(3)⁰, γ = 77.603(3)⁰ and V = 1769.71 (17) Å3. The photoluminescence spectrum showed emission peaks at 550 nm, 600 nm and 647 nm due to the characteristic transitions 4G5/2 to 6H5/2, 4G5/2 to 6H7/2 and 4G5/2 to 6H9/2 respectively, when excited at 398 nm.

  10. High-temperature heat capacity of samarium and erbium titanates with pyrochlore structure

    Science.gov (United States)

    Denisova, L. T.; Chumilina, L. G.; Denisov, V. M.; Ryabov, V. V.

    2017-12-01

    Titanates Sm2Ti2O7 and Er2Ti2O7 with pyrochlore structure have been prepared by solid-phase synthesis in air from stoichiometric Sm2O3 (Er2O3)-TiO2 mixtures sequentially at 1673 and 1773 K. Hightemperature heat capacity of the oxide compounds has been determined by differential scanning calorimetry. Their thermodynamic properties have been calculated from experimental temperature dependence C p = f( T).

  11. Fluorescence enhancement of samarium (III) perchlorate by 1,10-phenanthroline on Phenylnaphthoylmethyl sulfoxide complex and luminescence mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Li, Wen-Xian, E-mail: nmglwx@163.com; Feng, Shu-Yan; Liu, Yu; Zhang, Jing; Xin, Xiao-Dong; Ao, Bo-Yang; Li, Ying-Jie

    2013-11-15

    A novel ligand, Phenylnaphthoylmethyl sulfoxide, was synthesized by a new method. Its novel binary complex, SmL{sub 5}·(ClO{sub 4}){sub 3}·2H{sub 2}O, and the ternary complex, SmL{sub 4}·L′(ClO{sub 4}){sub 3}·2H{sub 2}O, had been synthesized (using Phenylnaphthoylmethyl sulfoxide as the first ligand L, 1,10-phenanthroline as the second ligand L′). The complexes were characterized by element analysis, coordination titration, molar conductivity, IR, TG-DSC, {sup 1}HNMR and UV spectra. Their fluorescence emission mechanism, fluorescence intensities and phosphorescence spectra of the two ligands were also investigated by comparison. Fluorescent spectra illustrated that the ternary rare-earth complex presented stronger fluorescence intensity than the binary rare-earth complex in such material. The strongest characteristic fluorescence emission intensity of the ternary system was 1.81 times as strong as that of the binary system. By the analysis of fluorescence and phosphorescence spectra, it was found that the Phenylnaphthoylmethyl sulfoxide and phen had the advantage to absorb and transfer energy to Sm (III) ions effectively, and then the complexes emitted the characteristic fluorescence of Sm (III) ions. The phosphorescence spectra and fluorescence lifetime of the complexes were also measured. -- Highlights: • A novel ligand, Phenylnaphthoylmethyl sulfoxide, has been synthesized. • Its novel ternary complex and the binary complex have been synthesized. • The fluorescence emission intensity of ternary rare earth complex exhibit obvious enhancement. • The fluorescence emission mechanism and phosphorescence spectra are also investigated.

  12. Polypropylene oil as fuel for solid oxide fuel cell with samarium doped-ceria (SDC)-carbonate as electrolyte

    Science.gov (United States)

    Syahputra, R. J. E.; Rahmawati, F.; Prameswari, A. P.; Saktian, R.

    2017-03-01

    The research focusses on converting polypropylene oil as pyrolysis product of polypropylene plastic into an electricity. The converter was a direct liquid fuel-solid oxide fuel cell (SOFC) with cerium oxide based material as electrolyte. The polypropylene vapor flowed into fuel cell, in the anode side and undergo oxidation reaction, meanwhile, the Oxygen in atmosphere reduced into oxygen ion at cathode. The fuel cell test was conducted at 400 - 600 °C. According to GC-MS analysis, the polypropylene oil consist of C8 to C27 hydrocarbon chain. The XRD analysis result shows that Na2CO3 did not change the crystal structure of SDC even increases the electrical conductivity. The maximum power density is 0.079 mW.cm-2 at 773 K. The open circuite voltage is 0.77 volt. Chemical stability test by analysing the single cell at before and after fuel cell test found that ionic migration occured during fuel cell operation. It is supported by the change of elemental composition in the point position of electrolyte and at the electrolyte-electrode interface

  13. A distribution pattern of cadmium, gadolinium and samarium in Phaseolus vulgaris (L) plants as assessed by dynamic neutron radiography

    Science.gov (United States)

    Kőrösi, Ferenc; Balaskó, Márton; Sváb, Erzsébet

    1999-11-01

    The qualitative and semi-quantitative distributions, presumably apoplast transport patterns for the Gd, Sm and Cd were investigated in the primordial leaf tissues of the bean using dynamic neutron radiography. According to the applied 3D, 2D images and the pixel count distribution histograms of the considered gray levels, peculiar distribution patterns were postulated for the elements. Main and lateral vascular systems for Gd, the cell walls as well as intercellular spaces for Sm and the main leaf vein for Cd assumed to be the apoplast transport spaces and volumes.

  14. Ab initio calculation of the migration free energy of oxygen diffusion in pure and samarium-doped ceria

    Science.gov (United States)

    Koettgen, Julius; Schmidt, Peter C.; Bučko, Tomáš; Martin, Manfred

    2018-01-01

    We have studied the free energy migration barriers Δ F‡ for oxygen diffusion in pure ceria and Sm-doped ceria for the temperatures 300, 700, and 1000 K. We used the density functional theory in the generalized gradient approximation and an additional Hubbard U parameter for the Ce 4 f electronic states. We compare the results for the free energy deduced from three different methods. First, a static harmonic approach is applied in which the temperature dependent vibrational contributions to energy and entropy are deduced from the phonon frequencies of supercells with a fixed volume. Second, a static quasiharmonic approach is used in which a part of the anharmonicity effect is introduced via an implicit dependence of the harmonic frequencies on the thermally expanding cell volume. Third, the free energy barriers are calculated using metadynamics and molecular dynamics in which anharmonicity effects are naturally taken into account. The three methods examined in this study lead to distinctly different results. According to the harmonic approximation, the migration free energy difference Δ F‡ increases with increasing temperature due to an increasing entropic contribution. According to the quasiharmonic approximation, the migration free energy is independent of temperature. Finally, molecular dynamics predicts a thermally induced increase in the migration free energy. We conclude that temperature dependent experimental lattice constants cancel out the increasing entropic contribution with increasing temperature in the static quasiharmonic approach. The full consideration of anharmonicity effects in the metadynamics method again leads to a temperature dependent migration free energy.

  15. Studies on the preparation and stability of samarium-153 propylene diamine tetramethylene phosphonate (PDTMP) complex as a bone seeker

    Energy Technology Data Exchange (ETDEWEB)

    Majali, M.A. E-mail: mythili@magnum.barc.ernet.in; Mathakar, A.R.; Shimpi, H.H.; Banerjee, Sharmila; Samuel, Grace

    2000-12-15

    Propylene diamine tetra methylene phosphonate (PDTMP) was synthesised by modifying a method reported for the synthesis of EDTMP. Complexation of the synthesised phosphonate ligand with {sup 153}Sm was carried out by varying the experimental parameters and the complex was radiochemically characterized. Biodistribution studies showed that the uptake by bone in rats was 2% per g of bone, which was retained up to 48 h. The uptake by other organs was insignificant, except by the liver which showed a slightly higher absorption.

  16. Crystal structure of a samarium(III nitrate chain cross-linked by a bis-carbamoylmethylphosphine oxide ligand

    Directory of Open Access Journals (Sweden)

    Julie A. Stoscup

    2014-10-01

    Full Text Available In the title compound poly[aquabis(μ-nitrato-κ4O,O′:O,O′′tetrakis(nitrato-κ2O,O′{μ4-tetraethyl [(ethane-1,2-diylbis(azanediylbis(2-oxoethane-2,1-diyl]diphosphonate-κ2O,O′}disamarium(III], [Sm2(NO36(C14H30N2O8P2(H2O]n, a 12-coordinate SmIII and a nine-coordinate SmIII cation are alternately linked via shared bis-bidentate nitrate anions into a corrugated chain extending parallel to the a axis. The nine-coordinate SmIII atom of this chain is also chelated by a bidentate, yet flexible, carbamoylmethylphoshine oxide (CMPO ligand and bears one water molecule. This water molecule is hydrogen bonded to nitrate groups bonded to the 12-coordinate SmIII cation. The CMPO ligand, which lies about an inversion center, links neighboring chains along the c axis, forming sheets parallel to the ac plane. Hydrogen bonds between the amide NH group and metal-bound nitrate anions are also present in these sheets. The sheets are packed along the b axis through only van der Waals interactions.

  17. Structure, reactivity, electronic configuration and magnetism of samarium atomic layers deposited on Si(0 0 1) by molecular beam epitaxy

    Energy Technology Data Exchange (ETDEWEB)

    Gheorghe, Nicoleta G.; Lungu, George A.; Husanu, Marius A.; Costescu, Ruxandra M.; Macovei, Dan [National Institute of Materials Physics, Atomistilor 105 b, 077125 Magurele-Ilfov (Romania); Teodorescu, Cristian M., E-mail: teodorescu@infim.ro [National Institute of Materials Physics, Atomistilor 105 b, 077125 Magurele-Ilfov (Romania)

    2013-02-15

    The surface structure, interface reactivity, electron configuration and magnetic properties of Sm layers deposited on Si(0 0 1) at various temperatures are investigated by low-energy electron diffraction (LEED), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS) and magneto-optical Kerr effect (MOKE). It is found that metal Sm is present on samples prepared at low temperature, with an interface layer containing SmSi{sub 2} and Sm{sub 4}Si{sub 3}. When samples are prepared at high temperature, much less metal Sm is found, with an increasing amount of SmSi{sub 2}. Room temperature ferromagnetism is observed for all prepared layers, with a decrease of the saturation magnetization when samples are prepared at high temperature. It is found that ferromagnetism implies mostly a compound with approximate stoichiometry Sm{sub 4}Si{sub 3}. Also, the decrease in the intensity of the XAS 2p{sub 3/2} → 3d white lines with the corresponding increasing amount of SmSi{sub 2} may be explained by assuming a higher occupancy of Sm 5d orbitals (5d{sup 2} configuration), most probably due to hybridation effects.

  18. Calculation and comparison of xenon and samarium reactivities of the HEU, LEU core in the low power research reactor.

    Science.gov (United States)

    Dawahra, S; Khattab, K; Saba, G

    2015-07-01

    Comparative studies for the conversion of the fuel from HEU to LEU in the Miniature Neutron Source Reactor (MNSR) have been performed using the MCNP4C and GETERA codes. The precise calculations of (135)Xe and (149)Sm concentrations and reactivities were carried out and compared during the MNSR operation time and after shutdown for the existing HEU fuel (UAl4-Al, 90% enriched) and the potential LEU fuels (U3Si2-Al, U3Si-Al, U9Mo-Al, 19.75% enriched and UO2, 12.6% enriched) in this paper using the MCNP4C and GETERA codes. It was found that the (135)Xe and (149)Sm reactivities did not reach their equilibrium reactivities during the daily operating time of the reactor. The (149)Sm reactivities could be neglected compared to (135)Xe reactivities during the reactor operating time and after shutdown. The calculations for the UAl4-Al produced the highest (135)Xe reactivity in all the studied fuel group during the reactor operation (0.39 mk) and after the reactor shutdown (0.735 mk), It followed by U3Si-Al (0.34 mk, 0.653 mk), U3Si2-Al (0.33 mk, 0.634 mk), U9Mo-Al (0.3 mk, 0.568 mk) and UO2 (0.24 mk, 0.448 mk) fuels, respectively. Finally, the results showed that the UO2 was the best candidate for fuel conversion to LEU in the MNSR since it gave the lowest (135)Xe reactivity during the reactor operation and after shutdown. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Development of samarium [{sup 32}P] phosphate colloid for radiosynoviorthesis applications: Preparation, biological and preliminary clinical studies experience

    Energy Technology Data Exchange (ETDEWEB)

    Prabhakar, G. [Radiopharmaceuticals Programme, Board of Radiation and Isotope Technology (BRIT), BARC Vashi Complex, Sector-20, Navi Mumbai 400 705 (India)], E-mail: gantipk47@rediffmail.com; Sachdev, Satbir S.; Umamaheswari, S.; Sivaprasad, N.; Bhatia, Manohar H. [Radiopharmaceuticals Programme, Board of Radiation and Isotope Technology (BRIT), BARC Vashi Complex, Sector-20, Navi Mumbai 400 705 (India); Chaudhari, Pradip R. [Laboratory Nuclear Medicine Services, BARC, Mumbai 400 012 (India); Solav, Srikant V. [Spect Lab, Nuclear Medicine Services, Opposite Dinanath Mangeshkar Hospital, Pune 411004 (India)

    2007-12-15

    A new therapeutic radio colloid for radiosynoviorthesis (RS) applications is reported. The method of preparation involves the reaction of SmCl{sub 3} carrier with carrier added [{sup 32}P]H{sub 3}PO{sub 4} in the presence of gelatin. The pure colloid was recovered by dialysis purification leading to radiochemical yield of around 90%. The radiochemical purity of the pure colloid formulated in isotonic saline was over 98%, for the usage period of 14 days, as assessed by paper chromatography. Ninety percent of colloid particles were in the size of 1-10 {mu}m as evident from the laser diffraction particle size analysis, ideally suitable for the intended end use. Animal studies revealed complete retention of the radio colloid in the rabbit knee joint. The results of clinical trials in humans are satisfactory and encouraging, satisfactory retention of the colloid in the knee joint and negligible leakage into the systemic circulation.

  20. Tetrakis(μ-propanoato-κ2O:O′bis[(1,10-phenanthroline-κ2N,N′(propanoato-κ2O,O′samarium(III

    Directory of Open Access Journals (Sweden)

    Chun-Xiang Wang

    2008-01-01

    Full Text Available The title complex, [Sm2(C3H5O26(C12H8N22], is a dinuclear centrosymmetric molecule, in which two crystallographically equivalent Sm atoms, separated by 3.9502 (2 Å, are bridged by four propanoate anions. Each Sm atom is coordinated by two N atoms from one chelating phenanthroline ligand and seven carboxylate O atoms from five propanoate anions, to form a distorted tricapped trigonal prism.

  1. Processing of composites based on NiO, samarium-doped ceria and carbonates (NiO-SDCC as anode support for solid oxide fuel cells

    Directory of Open Access Journals (Sweden)

    Lily Siong Mahmud

    2017-09-01

    Full Text Available NiO-SDCC composites consisting of NiO mixed with Sm-doped ceria (SDC and carbonates (Li2CO3 and Na2CO3 were sintered at different temperatures and reduced at 550 °C. The influence of reduction on structure of the NiO-SDCC anode support for solid oxide fuel cells (SOFCs was investigated. Raman spectra of the NiO-SDCC samples sintered at 500, 600 and 700 °C showed that after reducing at 550 °C NiO was reduced to Ni. In addition, SDC and carbonates (Li2CO3 and Na2CO3 did not undergo chemical transformation after reduction and were still detected in the samples. However, no Raman modes of carbonates were identified in the NiO-SDCC pellet sintered at 1000 °C and reduced at 550 °C. It is suspected that carbonates were decomposed at high sintering temperature and eliminated due to the reaction between the CO32– and hydrogen ions during reduction in humidified gases at 550 °C. The carbonate decomposition increased porosity in the Ni-SDCC pellets and consequently caused formation of brittle and fragile structure unappropriated for SOFC application. Because of that composite NiO-SDC samples without carbonates were also analysed to determine the factors affecting the crack formation. In addition, it was shown that the different reduction temperatures also influenced the microstructure and porosity of the pellets. Thus, it was observed that Ni-SDC pellet reduced at 800 °C has higher electrical conductivity of well-connected microstructures and sufficient porosity than the pellet reduced at 550 °C.

  2. The single cell of low temperature solid oxide fuel cell with sodium carbonate-SDC (samarium-doped ceria) as electrolyte and biodiesel as fuel

    Science.gov (United States)

    Rahmawati, F.; Nuryanto, A.; Nugrahaningtyas, K. D.

    2016-02-01

    In this research NSDC (composite of Na2CO3-SDC) was prepared by the sol-gel method to produce NSDC1 and also by the ceramic method to produce NSDC2. The prepared NSDC then were analyzed by XRD embedded with Le Bail refinement to study the change of characteristic peaks, their crystal structure, and their cell parameters. Meanwhile, the measurement of impedance was conducted to study the electrical conductivity of the prepared materials. A single cell was prepared by coating NSDC-L (a composite of NSDC with Li0.2Ni0.7Cu0.1O2) on both surfaces of NSDC. The NSDC-L was used as anode and cathode. The ionic conductivity of NSDC1 and NSDC2 at 400 oC are 4.1109 x 10-2 S.cm-1 and 1.6231 x 10-2 S.cm-1, respectively. Both electrolytes have ionic conductivity higher than 1 x 10-4 S.cm-1, therefore, can be categorized as good electrolyte [1]. However, the NSDC1 shows electrodeelectrolyte conduction. It indicates the existence of electronic migration from electrolyte- electrode or vice versa. Those may cause a short circuit during fuel cell operation and will reduce the fuel cell performance fastly. The single cell tests were conducted at 300, 400, 500 and 600 °C. The single fuel cell with NSDC1 and NSDC2 as electrolyte show maximum power density at 400 °C with the power density of 3.736 x 10-2 mW.cm-2 and 2.245 x 10-2 mW.cm-2, respectively.

  3. Samarium-neodymium chronology and rubidium-strontium systematics of an Allende calcium-aluminum-rich inclusion with implications for 146Sm half-life

    Science.gov (United States)

    Marks, N. E.; Borg, L. E.; Hutcheon, I. D.; Jacobsen, B.; Clayton, R. N.

    2014-11-01

    Calcium-aluminum-rich inclusions (CAIs) are primitive objects that formed within the protoplanetary disk surrounding the young Sun. Recent Pb-Pb chronologic studies have demonstrated that CAIs are the oldest solar system solids, crystallizing 4567 Ma ago (Amelin et al., 2002; Connelly et al., 2012). The isotope systematics of CAIs therefore provide critical insight into the earliest history of the Solar System. Although Sm-Nd and Rb-Sr geochronometers are highly effective tools for investigating cosmochemical evolution in the early Solar System, previous studies of CAIs have revealed evidence for isotopically disturbed systems. Here we report new age data for Allende CAI Al3S4 derived from both the long-lived (147Sm-143Nd) and short-lived (146Sm-142Nd) isotopic systems. The 147Sm-143Nd chronometer yields an age of 4560 ± 34 Ma that is concordant with 207Pb-206Pb ages for CAIs and indicates that the Sm-Nd system was not significantly disturbed by secondary alteration or nucleosynthetic processes. The slope of the 146Sm-142Nd isochron defines the Solar System initial 146Sm/144Sm of 0.00828 ± 0.00044. This value is significantly different from the value of 0.0094 determined by Kinoshita et al. (2012). Ages recalculated from all published 146Sm-142Nd isochron data using the traditional 103 Ma half-life and the initial 146Sm/144Sm value determined here closely match Pb-Pb and 147Sm-143Nd ages determined on the same samples. In contrast, ages recalculated using the 68 Ma half-life determined by Kinoshita et al. (2012) and either of the initial 146Sm/144Sm values are often anomalously old. This is particularly true for the youngest samples with 146Sm-142Nd isochron ages that are most sensitive to the choice of 146Sm half-life used in the age calculation. In contrast to the Sm-Nd isotope system, the Rb-Sr system is affected by alteration but yields an apparent isochron with a slope corresponding to a much younger age of 4247 ± 110 Ma. Although the Rb-Sr system in CAIs appears to be disturbed, the initial 87Sr/86Sr value determined from the isochron is 0.698942 ± 0.000008, and closely approximates estimates of the initial Solar System value. Although this isochron may be a mixing line, it might also record alteration on the Allende parent body in which Rb was added to the Al3S4 CAI that was initially largely devoid of Rb.

  4. Anthropogenic dissolved and colloid/nanoparticle-bound samarium, lanthanum and gadolinium in the Rhine River and the impending destruction of the natural rare earth element distribution in rivers

    Science.gov (United States)

    Kulaksız, Serkan; Bau, Michael

    2013-01-01

    The strong increase in the consumption of rare earth elements (REE) in high-tech products and processes is accompanied by increasing amounts of REE released into the environment. Following the first report of Gd contamination of the hydrosphere in 1996, anthropogenic Gd originating from contrast agents has now been reported worldwide from river and estuarine waters, coastal seawater, groundwater and tap water. Recently, microcontamination with La, that is derived from a point source where catalysts for petroleum refining are produced, has been detected in the Rhine River in Germany and the Netherlands. Here we report the occurrence of yet another REE microcontamination of river water: in addition to anthropogenic Gd and La, the Rhine River now also shows significant amounts of anthropogenic Sm. The anthropogenic Sm, which enters the Rhine River north of Worms, Germany, with the same industrial wastewater that carries the anthropogenic La, can be traced through the Middle and Lower Rhine to the Netherlands. At Leverkusen, Germany, some 250 km downstream from the point source at Worms, anthropogenic Sm still contributes up to 87% of the total dissolved Sm concentration of the Rhine River. Results from ultrafiltration suggest that while the anthropogenic Gd is not particle-reactive and hence exclusively present in the truly dissolved REE pool (Worms get close to and well-above, respectively, the levels at which ecotoxicological effects have been documented. Because of the increasing use of REE and other formerly "exotic" trace elements in high-tech applications, these critical metals have now become emerging contaminants that should be monitored, and it appears that studies of their biogeochemical behavior in natural freshwaters might soon no longer be possible.

  5. Ultra-Sensitive Nano Optical Sensor Samarium-Doxycycline Doped in Sol Gel Matrix for Assessment of Glucose Oxidase Activity in Diabetics Disease.

    Science.gov (United States)

    Tharwat, Marwa M; Attia, M S; Alghamdi, M S; Mahros, Amr M

    2017-07-11

    A low cost and very sensitive method for the determination of the activity of glucose oxidase enzyme in different diabetics serum samples was developed. The method based on the assessment of the H2O2 concentration produced from the reaction of the glucose oxidase (GOx) enzyme with glucose as substrate in the serum of diabetics patients by nano optical sensor Sm-doxycycline doped in sol gel matrix. H2O2 enhances the luminescence intensity of all bands of the nano Sm-doxycycline complex [Sm-(DC)2](+) doped in sol-gel matrix, especially the 645 nm band at λex = 400 nm and pH 7.0 in water. The influence of the different analytical parameters that affect the luminescence intensity of the nano optical sensor, e.g. pH, H2O2 concentration and foreign ions concentrations were studied. The remarkable enhancement of the luminescence intensity of nano optical sensor [Sm-(DC)2](+) complex in water at 645 nm by the addition of various concentrations of H2O2 was successfully used as an optical sensor for the assessment of the activity of the glucose oxidase enzyme in different diabetics serum samples. The calibration plot was achieved over the activity range 0.1-240 U/L with a correlation coefficient of 0.999 and a detection limit of 0.05 U/L.

  6. Effect of Mg doping and sintering temperature on structural and morphological properties of samarium-doped ceria for IT-SOFC electrolyte

    Science.gov (United States)

    Ahmad, Syed Ismail; Mohammed, Tasneem; Bahafi, Amal; Suresh, Madireddy Buchi

    2017-06-01

    Samples of Sm and Mg co-doped ceria electrolyte of Ce1- x Sm x- y Mg y O2- δ ( x = 0.2; y = 0.00, 0.05, 0.1, 0.15, and 0.175) were synthesized by sol-gel process. The prepared samples were sintered at 1100 and 1400 °C for 4 h. The bulk densities were measured by Archimedes method. XRD measurements indicate that the synthesized samples were in single-phase cubic fluorite structure (space group Fm3m). The cell parameters decrease with the concentration of Mg, and 2 θ values slightly shift towards right. The particle sizes obtained were between 7.14 and 17.44 nm. The sintered sample achieved 95% of theoretical density. FTIR spectra of samples sintered at 1400 °C indicates weak interactions between 3550-3400 cm-1 and 1600-1300 cm-1 are attributed to O-H stretching modes and strong bonds 850-450 cm-1 are assigned to characteristic Ce-O vibrations. The surface morphology and chemical composition were analyzed by SEM and EDS, SEM micrographs show spherical faceted grains, and the samples were crack free, dense material with some pores on surface which are inconsistent with density results. The average grain size obtained was 0.5 μm. Particle size obtained by TEM was in agreement with that obtained by XRD. The high-density ceria co-doped ceramic can be used as electrolyte in SOFC.

  7. Synthesis, spectroscopic, thermal and antimicrobial studies of neodymium(III) and samarium(III) complexes derived from tetradentate ligands containing N and S donor atoms

    Science.gov (United States)

    Ain, Qurratul; Pandey, S. K.; Pandey, O. P.; Sengupta, S. K.

    2015-04-01

    Trivalent lanthanide complexes of the type [Ln(L)Cl(H2O)2] (where Ln = Nd(III) or Sm(III) and LH2 = Schiff bases derived by the condensation of 3-(phenyl/substitutedphenyl)-4-amino-5-mercapto-1,2,4-triazole with diacetyl/benzil) have been synthesized by the reactions of anhydrous lanthanide(III) chloride with Schiff bases in methanol. The structures of the complexes have been proposed on the basis of elemental analysis, electrical conductance, magnetic moment, spectroscopic measurements (IR, 1H, 13C NMR and UV-vis spectra) and X-ray diffraction studies. The spectral data reveal that the Schiff base ligands behave as dibasic tetradentate chelating agents having coordination sites at two thiol sulfur atoms and two azomethine nitrogen atoms. The presence of coordinated water in metal complexes was confirmed by thermal and IR data of the complexes. All the Schiff bases and their metal complexes have also been screened for their antibacterial activity against Bacillus subtilis, Staphylococcus aureus and antifungal activities against Aspergillus niger, Curvularia pallescens and Colletotrichum capsici.

  8. Logarithmic temperature dependence of samarium ion valence in the heavy-fermion S mxL a1 -xO s4S b12

    Science.gov (United States)

    Fushiya, Kengo; Miyazaki, Ryoichi; Higashinaka, Ryuji; Yamada, Akira; Mizumaki, Masaichiro; Tsutsui, Satoshi; Nitta, Kiyofumi; Uruga, Tomoya; Suemitsu, Bunya; Sato, Hideyuki; Aoki, Yuji

    2015-08-01

    We have measured x-ray absorption spectra at the Sm L3 edge to investigate the Sm-ion valence of (S mxL a1 -x) O s4S b12 , in which field-insensitive heavy-fermion behavior appears at low temperatures for x =1 . It has been found that the Sm-ion valance shifts to 2 + with La ion substitution; from v =+2.78 (x =1 ) to v =+2.73 (x =0.2 ) at 10 K. For all x investigated, its temperature dependence shows a logT behavior, indicating that the valence change is caused by "an unconventional Kondo effect" associated with Sm 4 f -electron charge degrees of freedom. Almost x independence of "the associated Kondo temperature" (T˜K=56 ±10 K ) indicates that the Kondo effect has a local nature, attributable to the cage structure of the filled skutterudite.

  9. Rare earth elements in the aragonitic shell of freshwater mussel Corbicula fluminea and the bioavailability of anthropogenic lanthanum, samarium and gadolinium in river water

    Energy Technology Data Exchange (ETDEWEB)

    Merschel, Gila, E-mail: g.merschel@jacobs-university.de; Bau, Michael

    2015-11-15

    High-technology metals — such as the rare earth elements (REE) — have become emerging contaminants in the hydrosphere, yet little is known about their bioavailability. The Rhine River and the Weser River in Germany are two prime examples of rivers that are subjected to anthropogenic REE input. While both rivers carry significant loads of anthropogenic Gd, originating from contrast agents used for magnetic resonance imaging, the Rhine River also carries large amounts of anthropogenic La and lately Sm which are discharged into the river from an industrial point source. Here, we assess the bioavailability of these anthropogenic microcontaminants in these rivers by analyzing the aragonitic shells of the freshwater bivalve Corbicula fluminea. Concentrations of purely geogenic REE in shells of comparable size cover a wide range of about one order of magnitude between different sampling sites. At a given sampling site, geogenic REE concentrations depend on shell size, i.e. mussel age. Although both rivers show large positive Gd anomalies in their dissolved loads, no anomalous enrichment of Gd relative to the geogenic REE can be observed in any of the analyzed shells. This indicates that the speciations of geogenic and anthropogenic Gd in the river water differ from each other and that the geogenic, but not the anthropogenic Gd is incorporated into the shells. In contrast, all shells sampled at sites downstream of the industrial point source of anthropogenic La and Sm in the Rhine River show positive La and Sm anomalies, revealing that these anthropogenic REE are bioavailable. Only little is known about the effects of long-term exposure to dissolved REE and their general ecotoxicity, but considering that anthropogenic Gd and even La have already been identified in German tap water and that anthropogenic La and Sm are bioavailable, this should be monitored and investigated further. - Highlights: • Corbicula fluminea shells are bioarchives of dissolved geogenic REE in rivers. • Anthropogenic La and Sm in the Rhine River are bioavailable, hence incorporated. • Anthropogenic Gd from contrast agents is not incorporated, i.e. not bioavailable. • REE concentrations in Corbicula shells decrease with increasing size, i.e. age.

  10. Mechanically induced strong red emission in samarium ions doped piezoelectric semiconductor CaZnOS for dynamic pressure sensing and imaging

    Science.gov (United States)

    Wang, Wei; Peng, Dengfeng; Zhang, Hanlu; Yang, Xiaohong; Pan, Caofeng

    2017-07-01

    Piezoelectric semiconductor with optical, electrical and mechanical multifunctions has great potential applications in future optoelectronic devices. The rich properties and applications mainly encompass the intrinsic structures and their coupling effects. Here, we report that lanthanide ions doped piezoelectric semiconductor CaZnOS:Sm3+ showing strong red emission induced by dynamic mechanical stress. Under moderate mechanical load, the doped piezoelectric semiconductor exhibits strong visible red emission to the naked eyes even under the day light. A flexible dynamic pressure sensor device is fabricated based on the prepared CaZnOS:Sm3+ powders. The mechanical-induced emission properties of the device are investigated by the optical fiber spectrometer. The linear characteristic emissions are attributed to the 4G5/2→6H5/2 (566 nm), 4G5/2→6H7/2 (580-632 nm), 4G5/2→6H9/2 (653-673 nm) and 4G5/2→6H11/2 (712-735 nm) f-f transitions of Sm3+ ions. The integral emission intensity is proportional to the value of applied pressure. By using the linear relationship between integrated emission intensity and the dynamic pressure, the real-time pressure distribution is visualized and recorded. Our results highlight that the incorporation of lanthanide luminescent ions into piezoelectric semiconductors as smart materials could be applied into the flexible mechanical-optical sensor device without additional auxiliary power, which has great potential for promising applications such as mapping of personalized handwriting, smart display, and human machine interface.

  11. Investigation of oxidative coupling of methane over bismuth oxychloride, samarium chloride, or manganese chloride supported on lithium carbonate-magnesia systems

    Energy Technology Data Exchange (ETDEWEB)

    Khan, A.Z.; Ruckenstein, E. (State Univ. of New York, Buffalo, NY (United States))

    1992-11-01

    The magnesia-supported bismuth oxychloride with lithium carbonate present is significantly more effective and stable with time-on-stream than the unsupported or supported systems free of Li[sub 2]CO[sub 3] in the oxidative coupling of methane at 750[degrees]C, P[sub CH[sub 4

  12. Rare earth elements in the aragonitic shell of freshwater mussel Corbicula fluminea and the bioavailability of anthropogenic lanthanum, samarium and gadolinium in river water.

    Science.gov (United States)

    Merschel, Gila; Bau, Michael

    2015-11-15

    High-technology metals - such as the rare earth elements (REE) - have become emerging contaminants in the hydrosphere, yet little is known about their bioavailability. The Rhine River and the Weser River in Germany are two prime examples of rivers that are subjected to anthropogenic REE input. While both rivers carry significant loads of anthropogenic Gd, originating from contrast agents used for magnetic resonance imaging, the Rhine River also carries large amounts of anthropogenic La and lately Sm which are discharged into the river from an industrial point source. Here, we assess the bioavailability of these anthropogenic microcontaminants in these rivers by analyzing the aragonitic shells of the freshwater bivalve Corbicula fluminea. Concentrations of purely geogenic REE in shells of comparable size cover a wide range of about one order of magnitude between different sampling sites. At a given sampling site, geogenic REE concentrations depend on shell size, i.e. mussel age. Although both rivers show large positive Gd anomalies in their dissolved loads, no anomalous enrichment of Gd relative to the geogenic REE can be observed in any of the analyzed shells. This indicates that the speciations of geogenic and anthropogenic Gd in the river water differ from each other and that the geogenic, but not the anthropogenic Gd is incorporated into the shells. In contrast, all shells sampled at sites downstream of the industrial point source of anthropogenic La and Sm in the Rhine River show positive La and Sm anomalies, revealing that these anthropogenic REE are bioavailable. Only little is known about the effects of long-term exposure to dissolved REE and their general ecotoxicity, but considering that anthropogenic Gd and even La have already been identified in German tap water and that anthropogenic La and Sm are bioavailable, this should be monitored and investigated further. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Samario-153-Lexidronam (EDTMP) en el tratamiento de las metástasis óseas Samarium-153-Lexidronam (EDTMP) for the management of bone metastases

    OpenAIRE

    F. Torre; C. Gómez-Vega; A. Callejo; J. Genolla

    2004-01-01

    Las metástasis óseas son una complicación frecuente en pacientes neoplásicos, en este sentido, el tejido óseo ocupa el tercer lugar de todos los órganos y sistemas con metástasis después del pulmón e hígado. Aproximadamente un 75% de los enfermos con metástasis óseas sufrirán dolor, siendo estas la causa más frecuente de dolor en pacientes con cáncer. El dolor óseo aumenta con los movimientos y a la presión, limitando la autonomía del enfermo y su calidad de vida. El tratamiento incluye vario...

  14. Morphology and orientation of β-BaB{sub 2}O{sub 4} crystals patterned by laser in the inside of samarium barium borate glass

    Energy Technology Data Exchange (ETDEWEB)

    Nishii, Akihito; Shinozaki, Kenji; Honma, Tsuyoshi; Komatsu, Takayuki, E-mail: komatsu@mst.nagaokaut.ac.jp

    2015-01-15

    Nonlinear optical β-BaB{sub 2}O{sub 4} crystal lines (β-BBO) were patterned in the inside of 8Sm{sub 2}O{sub 3}–42BaO–50B{sub 2}O{sub 3} glass by irradiations of continuous-wave Yb:YVO{sub 4} lasers with a wavelength of 1080 nm (power: P=0.8–1.0 W, scanning speed: S=0.2–2.5 μm/s), in which the laser focal position was moved gradually from the surface to the inside. The morphology, size, and orientation of β-BBO crystals were examined from polarization optical microscope and birefringence imaging observations. It was demonstrated that c-axis oriented β-BBO crystals with long lengths (e.g., 20 mm) were patterned in the inside of the glass. The morphology of β-BBO in the cross-section of lines was a rectangular shape with rounded corners, and the volume of β-BBO formed increased with increasing laser power and with decreasing laser scanning speed. The maximum depth in the inside from the surface for β-BBO patterning increased with increasing laser power, e.g., D{sub max}∼100 μm at P=0.8 W, D{sub max}∼170 μm at P=0.9 W, and D{sub max}∼200 μm at P=1 W. The present study proposes that the laser-induced crystallization opens a new door for applied engineering in glassy solids. - Graphical abstract: This figure shows the POM photographs for β-BaB{sub 2}O{sub 4} crystal lines patterned by cw Yb:YVO{sub 4} fiber laser irradiations with a laser power of P=0.8 W and a laser scanning speed S=2 μm/s in the glass. The laser focal point was moved gradually from the surface into the inside. The results shown in Fig. 1 demonstrate that it is possible to pattern highly oriented β-BaB{sub 2}O{sub 4} crystals even in the inside of glasses. - Highlights: • β-BaB{sub 2}O{sub 4} crystal lines were patterned in the inside of a glass by lasers. • Laser focal position was moved gradually from the surface to the inside. • Birefringence imaging was observed. • Morphology, size, and orientation of crystals were clarified. • Crystal lines with long lengths (e.g., 20 mm) were patterned at the depth of 200 μm.

  15. 10 CFR Appendix C to Part 20 - Quantities 1 of Licensed Material Requiring Labeling

    Science.gov (United States)

    2010-01-01

    ... Samarium-151 10 Samarium-153 100 Samarium-155 1,000 Samarium-156 1,000 Europium-145 100 Europium-146 100 Europium-147 100 Europium-148 10 Europium-149 100 Europium-150 (12.62h) 100 Europium-150 (34.2y) 1 Europium-152m 100 Europium-152 1 Europium-154 1 Europium-155 10 Europium-156 100 Europium-157 100 Europium-158 1...

  16. An experiment using neutron activation analysis and a rare earth element to mark cotton plants and two insects that feed on them

    Energy Technology Data Exchange (ETDEWEB)

    Showler, Allan T. [USDA-ARS IFNRRU, Kika de la Garza Subtropical Agricultural Research Center, 2413 East Highway 83, Weslaco, TX 78596 (United States)]. E-mail: ashowler@weslaco.ars.usda.gov; James, William D. [Elemental Analysis Laboratory, 3144 Texas A and M University, College Station, TX 77843-3144 (United States); Armstrong, John S. [USDA-ARS BIRU, Kika de la Garza Subtropical Agricultural Research Center, 2413 East Highway 83, Weslaco, TX 78596 (United States); Westbrook, John K. [USDA-ARS APMRU, 2771 F and B Road, College Station, TX 77845-4966 (United States)

    2006-08-15

    Studies on insect dispersal and other behaviors can benefit from using markers that will not alter flight and fitness. Rare earth elements, such as samarium (Sm), have been used as ingested markers of some insects and detected using neutron activation analysis (NAA). In this study, samarium nitrate hexahydrate was mixed into artificial diet for boll weevils, Anthonomus grandis grandis Boheman (Coleoptera: Curculionidae), at different dosages and in water used to irrigate cotton, Gossypium hirsutum L. Samarium was detected in adult boll weevils fed on the samarium-labeled diet, but not after 5 or 10 days of being switched to non-labeled diet, even if the insects were given labeled diet for as long as 7 consecutive days. Introduced in irrigation water, 1% samarium (m/m) was detectable in cotton squares and leaf tissue. However, boll weevil adults fed samarium-labeled squares did not retain detectable levels of samarium, nor did boll weevil adults reared to adulthood from samarium-labeled squares. Fourth instar beet armyworms, Spodoptera exigua (Huebner) (Noctuidae: Lepidoptera), fed on samarium-labeled cotton leaves obtained enough samarium for NAA detection, but adult moths reared from them did not have detectable amounts of samarium. Although samarium can be useful as a marker when insects are presented with a continuous pulse of the label, elements that are assimilated by the insect would be more useful if a continuous infusion of the marker cannot be provided.

  17. Obtention of Samarium and Gadolinium concentrates by solvent extraction using mono-2-ethylhexyl ester of 2-ethylhexyl phosphonic acid; Obtencao de concentrados de samario e gadolinio via extracao por solventes com o ester mono-2-etilhexil do acido 2-etilhexilfosfonico

    Energy Technology Data Exchange (ETDEWEB)

    Miranda Junior, Pedro

    1996-07-01

    The rare earth chlorides solution employed in this study, which is constituted by medium and heavy fractions, is derived from monazite processing accomplished by NUCLEMON-Mineroquimica (SP). This solution shows an acidity about 1.18 M and 189 g/L of rare earth oxides, containing as main constituents: Sm(34.55%), Gd(23.85%), Dy (6.82%), and Y (24.45%). It was used, as organic phase, 2-ethylhexyl phosphonic acid, mono-2-ethylhexylester diluted to 1 M in isododecane. (author)

  18. Poly(dl)lactic acid/polyglycolic acid/iron and poly(dl)lactic acid/polyglycolic acid/samarium cobalt composites for use as a delivery mechanism for magnetically directed chondrogenesis

    Science.gov (United States)

    Oppermann, Dean Alan

    Magnetically directed chondrogenesis (MDC) is a fundamental approach to articular cartilage repair. In MDC a magnet is implanted into the subchondral trabecular bone underlying a cartilage defect and used to attract chondrocytes, magnetically tagged with Fe nanoparticles, to the defect site. Pilot studies by Halpern, Crimp and Grande, using solid neodymium (Nd) magnets, indicated optimistic results by producing a hyaline-like articular cartilage after 8 weeks implantation. Since solid Nd magnets introduce long-term biocompatibility issues, the focus of this dissertation was to develop P(dl)A/PGA/Fe and P(dl)A/PGA/SmCo 5 implants for use in MDC. The effect of implant porosity, implant composition and magnetic material (Fe or SmCo5) on the initial and degraded magnetic properties were evaluated. The biocompatibility of P(dl)A/PGA/Fe implants were investigated by implantation into New Zealand white rabbits for 8 weeks. The effect of hydrogen peroxide (H2O2) and ethylene oxide (EO) sterilization techniques on the molecular weight and chemical structure of P(dl)A/PGA polymers were evaluated using gel permeation chromatography and Fourier transform infrared spectroscopy. The effect of implant morphology, size and number on the von Mises stress in the trabecular bone surrounding the implant was evaluated using a finite element model. In general, SmCo5 implants resulted in higher magnetic fields initially and after 8 weeks of degradation than comparable Fe implants. Increases in magnetic field strength were achieved by increasing the volume fraction of magnetic material and by increasing the PGA concentration. The magnetic field strength degradation rate decreased with increases in volume fraction of magnetic material and increases in PLA concentration. Implantation studies indicated that 50/50 P(dl)A/PGA were more bioactive than 75/25 P(dl)A/PGA with an increased cellular response that is specific to bone growth. The compressive strength and elastic modulus of porous implants were comparable to trabecular bone, and the compressive strength and elastic modulus of solid implants was higher than trabecular bone but less than cortical bone. Finite element modeling showed that the implantation of solid and porous P(dl)A/PGA/Fe implants did not significantly increase the von Mises stress concentration adjacent to the implant. The von Mises stress surrounding porous implants was higher than the solid implants which predicts faster bone remodeling. Comparing single implants to multiple implants indicated a significant decrease in von Mises stress between the implants. This would predict bone resorption in that area. H2O2 sterilization resulted in a gradual decrease in the molecular weight of P(dl)A/PGA polymers that was a result of hydrolytic scission of the ester bonds present between the individual monomers. The polymers were less affected by EO sterilization with only the 75/25 P(dl)A/PGA, indicating a decrease in molecular weight. From these results, it was concluded that solid 50/50 P(dl)A/PGA/SmCo 5 implants that span the entire width of the cartilage defect should be used to optimize the attraction potential and bioactivity of the implant. Also ethylene oxide, which caused less premature implant degradation, should be used for sterilization.

  19. Fabrication of a new samarium(III) ion-selective electrode based on 3-{l_brace}[2-oxo-1(2h)-acenaphthylenyliden]amino{r_brace}-2-thioxo -1,3-thiazolidin-4-one

    Energy Technology Data Exchange (ETDEWEB)

    Zamani, Hassan Ali [Islamic Azad University, Quchan (Iran, islamic Republic of). Quchan Branch. Dept. of Chemistry]. E-mail: haszamani@yahoo.com; Ganjali, Mohammad Reza [Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of). Endocrine and Metabolism Research Center; Adib, Mehdi [University of Tehran, Tehran (Iran, Islamic Republic of). Faculty of Chemistry. Center of Excellence in Electrochemistry

    2007-07-01

    This paper introduces the development of an original PVC membrane electrode, based on 3-{l_brace}[2-oxo-1(2H)-acenaphthylenyliden]amino{r_brace}-2-thioxo-1,3-thiazolidin-4-one (ATTO) which has revealed to be a suitable carrier for Sm{sup 3+} ions. The resulting data illustrated that the electrode shows a Nernstian slope of 19.3 {+-} 0.6 mV per decade for Sm{sup 3+} ions over a broad working concentration range of 1.0 X 10{sup -6} to 1.0 X 10{sup -1} mol L{sup -1}. The lower detection limit was found to be equal to (5.5{+-} 0.3) X 10{sup -7} mol L{sup -}'1 in the pH range of 3.5-7.5, and the response time was very short ({approx}10 s). The potentiometric sensor displayed good selectivities for a number of cations such as alkali, alkaline earth, transition and heavy metal ions. (author)

  20. BASIC RESEARCH ON THE SEPARATION OF SCANDIUM YTTRIUM, AND THE RARE EARTHS BY SOLVENT EXTRACTION.

    Science.gov (United States)

    RARE EARTH ELEMENTS, * SOLVENT EXTRACTION ), (*CHELATE COMPOUNDS, RARE EARTH ELEMENTS), PURIFICATION, ATOMIC SPECTROSCOPY, SCANDIUM, YTTRIUM, PRASEODYMIUM, SAMARIUM, EUROPIUM, GADOLINIUM, TERBIUM, FLUORINE COMPOUNDS, KETONES

  1. Assessment of Non-Traditional Isotopic Ratios by Mass Spectrometry for Analysis of Nuclear Activities

    Science.gov (United States)

    2016-03-01

    distinguish between commercial nuclear reactor fuel cycles, fuel cycles for weapons grade plutonium , and products from nuclear weapons explosions. Methods will...Isotopic ratios will be calculated for radionuclides produced in commercial nuclear reactor fuel cycles, fuel cycles for weapons grade plutonium , and... chemistry for analysis of samarium. The chemical form of samarium required for analysis varies for different mass spectrometry techniques

  2. The Critical Technologies Project Executive Summary

    Science.gov (United States)

    1981-01-01

    Materials with the Not covered Chalcopyrite Structure 7.8.23 Rare Earth- Transition Metal Permanent Not covered I Magnets (exanple: samarium cobalt and... Transition Metal Permanent - Magnets (example: samarium cobalt I and substituted samarium cobalt) New 7.8.24 Gadolinium Gallium Garnet (GGG) - - and...III T i mm~ 1.W 8 Chwn..cal Poesse Maclw Tools 1110 1129. 1131 133 1142 0 F -~, oO 16.qm P c Metals 1145, 1203, 1236 4203 1365 00, awm.wq *4 1303 1311

  3. sup 8 sup 9 Sr and sup 1 sup 5 sup 3 Sm-EDTMP therapy of disseminated skeletal metastasis

    CERN Document Server

    Zhang Jun Ning; Zhu Shou Peng

    2001-01-01

    A retrospective analysis was performed on 72 patients with disseminated skeletal metastasis to evaluate the effect of strontium-89 or samarium-153 EDTMP therapy. There existed 87.88% of clinical response, 12.12% of no response in the group treated with strontium-89 as compared with 90.24% of clinical response, 9.76% no response in one treated with samarium-153 EDTMP; and there were no correlation between the treatment results and the amounts of isotopes administrated. The results suggest that strontium-89 or samarium-153 EDTMP therapy is a method of first choice in the palliative treatment for disseminated skeletal metastasis

  4. General Information about Osteosarcoma and Malignant Fibrous Histiocytoma of Bone

    Science.gov (United States)

    ... providers who are experts in treating cancer in children. Treatment for osteosarcoma or malignant fibrous histiocytoma may cause side effects. Four types of standard treatment are used: Surgery Chemotherapy Radiation therapy Samarium New types of treatment are ...

  5. Treatment Option Overview (Osteosarcoma and Malignant Fibrous Histiocytoma of Bone)

    Science.gov (United States)

    ... providers who are experts in treating cancer in children. Treatment for osteosarcoma or malignant fibrous histiocytoma may cause side effects. Four types of standard treatment are used: Surgery Chemotherapy Radiation therapy Samarium New types of treatment are ...

  6. Maximum Permissible Concentrations and Negligible Concentrations for Rare Earth Elements (REEs)

    NARCIS (Netherlands)

    Sneller FEC; Kalf DF; Weltje L; Wezel AP van; CSR

    2000-01-01

    In dit rapport worden maximaal toelaatbare risiconiveaus (MTR) en verwaarloosbare risiconiveaus (VR) afgeleid voor zeldzame aardmetalen (ZAM). De geselecteerde ZAMs zijn Yttrium (Y), Lanthanum (La), Cerium (Ce), Praseodymium (Pr), Neodymium (Nd), Samarium (Sm), Gadolinium (Gd), en Dysprosium

  7. Bulletin of the Chemical Society of Ethiopia - Vol 31, No 3 (2017)

    African Journals Online (AJOL)

    A novel samarium complex with interesting photoluminescence and semiconductive properties · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. D. W. Zhang, W. T. Chen, Y. F.Wang, 435-444 ...

  8. Specialty Metals: DOD Dissemination of National Security Waiver Information Could Enhance Awareness and Compliance with Restrictions

    Science.gov (United States)

    2014-10-01

    Restrictions Why GAO Did This Study Specialty metals—such as titanium, certain steel alloys , and samarium- cobalt alloy magnets—are essential to DOD...highly magnetic, lightweight, corrosion resistant, or having high durability. Among these metals are samarium- cobalt alloy magnets used to make radar...the following elements: aluminum, chromium , cobalt , columbium, molybdenum, nickel, titanium, tungsten, or vanadium. Specialty metals were added

  9. Development of a methodology for the separation of europium and samarium from a mixture of rare earth oxides by electroreduction/ precipitation; Desenvolvimento de uma metodologia para a separacao de samario e europio a partir de mistura de oxidos de terras raras por reducao eletroquimica/precipitacao

    Energy Technology Data Exchange (ETDEWEB)

    Chepcanoff, Vera

    2006-07-01

    The rare earths (RE) were first used in 1903, when Welsbach developed a lighter that is still used today. Nowadays, the RE are employed in many different fields, as in the production of super-alloys , as catalysts for petroleum industry, in the manufacture of non-ferrous alloys, color television tubes, x-ray screens, special glasses, ceramics, computer industries, nuclear medicine, lasers, pigments, etc., moving, in the last decade , a market of US$ 2 billions per year. Due to their similar properties, the RE elements are very difficult to separate, requiring complex processes, what make the products very expensive. Elements like Eu and Sm, which contents in the minerals are low (0.05% and 2.0%, respectively, in monazite) are extremely expensive, but their field of application justifies the research for looking for other processes, more simple and/or more effective. Trivalent state is a characteristic of all RE, but some of them presents oxidation state +2, like Ce, Eu, Sm and Yb. In the case of Eu and Sm, the focus of the present work, the divalent state is achieved by electro-reduction in the potentials -0.65 and -1.55 (SCE), respectively. This makes possible the separation of these elements from the other rare earths and from each other. Thus, making use of this characteristic, a process for the individual separation of Eu and Sm in (NH{sub 4}){sub 2}SO{sub 4} solution by electro-reduction/precipitation is proposed, where Sm is first separated from the solution as sulfate, and Eu, that remains in the solution, is precipitated after the decrease of temperature and potential applied. The process developed from a synthetic Eu and Sm solution was applied to a mixture of semi-heavy RE oxide, produced at IPEN-CNEN/SP, obtaining the separation of Sm. This product was analyzed by spectrophotometry, showing high purity. (author)

  10. Tetrakis[μ-2-(3,4-dimethoxyphenylacetato]-κ4O:O′;κ3O,O′:O;κ3O:O,O′-bis{[2-(3,4-dimethoxyphenylacetato-κ2O,O′](1,10-phenanthroline-κ2N,N′samarium(III}

    Directory of Open Access Journals (Sweden)

    Jia-Lu Liu

    2010-11-01

    Full Text Available In the centrosymmetric dinuclear title complex, [Sm2(C10H11O46(C12H8N22], the SmIII ion is nine-coordinated by seven O atoms of five 2-(3,4-dimethoxyphenylacetate (DMPA ligands and two N atoms of one bis-chelating 1,10-phenanthroline (phen ligand, forming a distorted tricapped trigonal-prismatic environment. The DMPA ligands coordinate in bis-chelate, bridging and bridging tridentate modes. An intramolecular C—H...O hydrogen bond occurs. Intermolecular C—H...O interactions are also present in the crystal.

  11. Preparation, and Luminescence Properties of SiO2@Sm(MABA-Siphen Core-Shell Structure Nanometer Composite

    Directory of Open Access Journals (Sweden)

    Feng Li-Na

    2018-01-01

    Full Text Available A novel ternary samarium complex was prepared using HOOCC6H4N(CONH(CH23Si- (OCH2CH332 (MABA-Si as first ligand, and phen as second ligand. The corresponding SiO2@Sm(MABA-Siphen core-shell structure nanometer composite was synthesized as well, and the silica spheres was the core, and the ternary samarium complex was the shell layer. The ternary samarium complex has been characterized by element analysis, molar conductivity and IR spectra. The results show that the chemical formula of the complex is Sm(MABA-Si(phen2(ClO43·2H2O. The fluorescent spectra illustrat that the luminescence properties of the samarium complex are superior. The core-shell structure of SiO2@Sm(MABA-Siphen nanometer composite is characterized by SEM, TEM and IR spectra. The SiO2@Sm(MABA-Siphen core-shell structure composites exhibit stronger emission intensity than the ternary samarium complex. The fluorescence lifetime of the complex and core-shell structure composite is measured as well.

  12. Udvikling af materialer til brintpermeable membraner

    DEFF Research Database (Denmark)

    Bentzer, Henrik Karnøe

    Due to global warming as well as other factors, it is necessary to find alternatives to the current consumption of fossil fuels. Oxide materials with high protonic conductivity can potentially find application within many different technological fields in a society that is based on renewable energy...... doped samarium titanate, lanthanum magnesium titanate and strontium cerate doped with yttrium and nickel. Concentration cell measurements were used to estimate transport numbers for protons and oxide ions in yttrium doped strontium cerate and calcium doped samarium titanate. Furthermore, the voltage...

  13. {6,6′-Dimethoxy-2,2′-[ethane-1,2-diylbis(nitrilomethylidyne]diphenolato-1κ4O1,O1′,O6,O6′:2κ4O1,N,N′,O1′}(ethanol-1κO-μ-nitrato-1:2κ2O:O′-dinitrato-1κ4O,O′-samarium(IIIzinc(II

    Directory of Open Access Journals (Sweden)

    Qiang Huang

    2009-10-01

    Full Text Available In the title heteronuclear ZnII–SmIII complex, [SmZn(C18H18N2O4(NO33(CH3CH2OH], with the hexadentate Schiff base compartmental ligand N,N′-bis(3-methoxysalicylideneethylenediamine (H2L, the SmIII and ZnII ions are triply bridged by two phenolate O atoms from the Schiff base ligand and one nitrate anion. The five-coordinate ZnII ion is in a square-pyramidal geometry formed by the donor centers of two imine N atoms, two phenolate O atoms and one of the bridging nitrate O atoms. The SmIII center is in a ten-fold coordination of O atoms, involving the phenolate O atoms, two methoxy O atoms, one ethanol O atom, and two O atoms from two nitrate anions and one from the bridging nitrate anion. In the crystal, intermolecular O—H...O and C—H...O interactions generate a layer structure extending parallel to (101.

  14. Performance Characterization of a Novel Plasma Thruster to Provide a Revolutionary Operationally Responsive Space Capability with Micro- and Nano-Satellites

    Science.gov (United States)

    2011-03-24

    Einstein Spontaneous Emission Rate Coefficient Electrical Utilization Efficiency Electron Electron Density...0.135 Tesla samarium cobalt (SmCo) permanent magnet from Electron Energy Corp. in Landisville, PA. Encapsulating the assembly is a simple aluminum...unlike some well-developed technologies, such as solid fueled rocket motors , an electric propulsion system could simultaneously contribute to all three

  15. Xe-135 and Sm-149 Isotopic Evolution Analysis Xesamo code; Analisis de la Evolucion Isotopica del Xe-135 y Sm-149. Programa Xesamo

    Energy Technology Data Exchange (ETDEWEB)

    Caro, R.; Gallego, J.; Martinez Fanegas, R.

    1977-07-01

    In this report the time evolution analysis of the nuclides concentration Xe-135 and Sm-149 as a function of the neutron flux is carried out. The neutron flux may be any function of time. It is analyzed as well the reactivity changes associated with the xenon and samarium concentration variations. (Author) 5 refs.

  16. Thermoluminescence characteristics of Sm doped NaYF4 crystals

    Indian Academy of Sciences (India)

    2006-06-28

    Jun 28, 2006 ... temperature peaks also vary in relation to the Sm3+ con- centration in NaYF4. This indicates a probable change in the trap structure of NaYF4 with the doping concentration of samarium impurity. This observation is in conformity with the earlier studies (Narasimha Reddy et al 1987;. Gopal Reddy et al 1988; ...

  17. Multiplet effects in the electronic structure of light rare-earth metals

    NARCIS (Netherlands)

    Lebegue, S.; Svane, A.; Katsnelson, M.I.; Lichtenstein, A.I.; Eriksson, O.

    2006-01-01

    The excited-state properties of the light rare-earth elemental metals praseodymium, neodymium, and samarium are studied within the Hubbard-I formalism. This method describes the multiplets of the rare-earth f shell by an exact diagonalization of the two-body part of the Hamiltonian. Subsequently,

  18. Structural, dielectric and electrical properties of Sm-modified Pb ...

    Indian Academy of Sciences (India)

    It is observed that. the dielectric permittivity () and loss tangent (tan ) are dependent on frequency,; the temperature of dielectric permittivity maximum shifts toward lower temperature side with the increase of samarium ion (Sm+3) concentration at the Pb sites, and; observed and calculated -values of XRD patterns show ...

  19. Ironless-armature brushless motor

    Science.gov (United States)

    Fisher, R. L.

    1977-01-01

    Device uses 12-pole samarium cobalt permanent-magnet rotor and three Hall-effect sensors for commutation. In prototype motor, torque constant (3-phase delta) is 65 oz-in/amp; electrical time constant (L/R) is 0.2 x 0.001 sec, and armature resistance is 20 ohms.

  20. Measurement of total angular momentum values of high-lying even ...

    Indian Academy of Sciences (India)

    Measurement of total angular momentum values of high-lying even-parity atomic states of samarium by spectrally resolved laser-induced fluorescence technique. A K PULHANI∗, M L SHAH, G P GUPTA and B M SURI. Laser and Plasma Technology Division, Bhabha Atomic Research Centre,. Mumbai 400 085, India.

  1. Measurement of total angular momentum values of high-lying even ...

    Indian Academy of Sciences (India)

    Spectrally resolved laser-induced fluorescence technique was used to uniquely assign total angular momentum () values to high-lying even-parity energy levels of atomic samarium. Unique value assignment was done for seven energy levels in the energy region 34,800–36,200 cm-1 , recently observed and reported in ...

  2. X-Ray studies reveal lanthanide binding sites at the A/B5 interface of E. coli heat labile enterotoxin

    NARCIS (Netherlands)

    Sixma, Titia K.; Terwisscha van Scheltinga, Anke C.; Kalk, Kor H.; Zhou, Kangjing; Wartna, Ellen S.; Hol, Wim G.J.

    1992-01-01

    The crystal structure determination of heat labile enterotoxin (LT) bound to two different lanthanide ions, erbium and samarium, revealed two distinct ion binding sites in the interface of the A subunit and the B pentamer of the toxin. One of the interface sites is conserved in the very similar

  3. X-RAY STUDIES REVEAL LANTHANIDE BINDING-SITES AT THE A/B5 INTERFACE OF ESCHERICHIA-COLI HEAT LABILE ENTEROTOXIN

    NARCIS (Netherlands)

    SIXMA, TK; VANSCHELTINGA, ACT; KALK, KH; WARTNA, ES; HOL, WGJ

    1992-01-01

    The crystal structure determination of heat labile enterotoxin (LT) bound to two different lanthanide ions, erbium and samarium, revealed two distinct ion binding sites in the interface of the A subunit and the B pentamer of the toxin. One of the interface sites is conserved in the very similar

  4. Author Details

    African Journals Online (AJOL)

    Prasad, T.N.V.K.. Vol 12, No 2 (2003) - Articles Pyroelectric Ferroelectric and Resistivity Studies on Samarium Modified Barium Strontium Sodium Niobate Ceramics Abstract. ISSN: 1019-1593. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL ...

  5. Thermoluminescent coactivated rare earth oxyhalide phosphors and X-ray image converters utilizing said phosphors

    Energy Technology Data Exchange (ETDEWEB)

    Rabatin, J.G.

    1984-11-06

    Oxyhalides of lanthanum, gadolinium and lutetium coactivated with a first activator selected from bismuth and samarium to provide the color of light emission and a second coactivator which increases the amount of stored energy in a stored radiographic latent image are found to be superior in their conversion efficiency of x-rays to visible light.

  6. Interactions between exogenous rare earth elements and phosphorus leaching in packed soil columns

    Science.gov (United States)

    Rare earth elements (REEs) increasingly used in agriculture as an amendment for crop growth may help to lessen environmental losses of phosphorus (P) from heavily fertilized soils. The vertical transport characteristics of P and REEs, lanthanum (La), neodymium (Nd), samarium (Sm), and cerium (Ce), w...

  7. Simplified syntheses of the water-soluble chiral shift reagents Sm-(R)-pdta and Sm-(S)-pdta

    Czech Academy of Sciences Publication Activity Database

    Hrubá, L.; Buděšínský, Miloš; Pícha, Jan; Jiráček, Jiří; Vaněk, Václav

    2013-01-01

    Roč. 54, č. 47 (2013), s. 6296-6297 ISSN 0040-4039 Institutional support: RVO:61388963 Keywords : NMR * chiral shift reagents * Sm-pdta * PDTA * samarium * 1,2-diaminopropane Subject RIV: CC - Organic Chemistry Impact factor: 2.391, year: 2013

  8. Perovskite catalysts for oxidative coupling

    Science.gov (United States)

    Campbell, Kenneth D.

    1991-01-01

    Perovskites of the structure A.sub.2 B.sub.2 C.sub.3 O.sub.10 are useful as catalysts for the oxidative coupling of lower alkane to heavier hydrocarbons. A is alkali metal; B is lanthanide or lanthanum, cerium, neodymium, samarium, praseodymium, gadolinium or dysprosium; and C is titanium.

  9. Lanthanide(III) complexes with tridentate Schiff base ligand ...

    African Journals Online (AJOL)

    The tridentate N4-type Schiff base was synthesized from the condensation reaction of 2-hydrazinopyridine and pyridine-2-carbaldehyde. Neodymium and Samarium complexes were isolated when the corresponding nitrate salt was added to the solution of the ligand. The isolated compounds were characterized by ...

  10. Author Details

    African Journals Online (AJOL)

    T. Chen, W. Vol 31, No 3 (2017) - Articles A novel samarium complex with interesting photoluminescence and semiconductive properties. Abstract PDF. ISSN: 1726-801X. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms ...

  11. The effect of rare-earth filtration on organ doses in intraoral radiography

    Energy Technology Data Exchange (ETDEWEB)

    Asako, Satoshi; Satoh, Kenji; Furumoto, Keiichi (Nippon Dental Univ., Tokyo (Japan))

    1994-08-01

    Filters of rare-earth elements such as lanthanum (La, Z=57), samarium (Sm, Z=62), gadolinium (Gd, Z=64) and erbium (Er, Z=68) are frequently used in radiography for the purpose of reducing the patient dose by eliminating low-energy and high-energy X-rays which are not involved in imaging. It is useful to evaluate the dose reduction achieved by these rare-earth filters in terms of organ dose, and the effective dose equivalent, which is used for evaluating carcinogenic risks and hereditary effects of X-ray irradiation, for the purpose of optimizing the radiographic technique and radiation protection. Therefore, we calculated the organ dose and effective dose equivalent during intraoral radiography of the maxillary incisor region by simulation using samarium or erbium, typical rare-earth elements, in filtration. We evaluated the effects of these metals in dose reduction. When samarium or erbium, 0.1 mm thick, was used in added filtration at tube voltage of 60, 70, 80 and 90 kV, the time required for radiography almost doubled, respectively. The organ dose at each tube voltage was the largest in the parathyroid and thyroid glands, followed by bone surfaces and the optic lenses, skin, red bone marrow and salivary glands, larynx, and brain, in that order. The organ dose at sites other than the larynx and brain decreased as the quality of the incident X-ray beam was hardened. When samarium or erbium was added at each voltage, the effective dose equivalent was reduced by about 20% to 45%. Erbium was more effective than samarium in reducing the effective dose equivalent, and either of the two elements decreased its effectiveness with an increase in tube voltage. (author) 43 refs.

  12. Phase equilibria in a ternary fullerenol-d(C60(OH)22-24)-SmCl3-H2O system at 25°C

    Science.gov (United States)

    Yur'ev, G. O.; Keskinov, V. A.; Semenov, K. N.; Charykov, N. A.

    2017-05-01

    The solubility in a ternary fullerenol-d (C60(OH)22-24)-SmCl3-H2O system at 25°C is studied via isothermal saturation in ampules. The solubility diagram is shown to be a simple eutonic one that consists of two branches corresponding to the crystallization of fullerenol-d (C60(OH)22-24 · 30H2O) and samarium(III) chloride SmCl3 · 6H2O crystallohydrates and contains one nonvariant eutonic point corresponding to saturation with both crystallohydrates. The long branch of C60(OH)22-24 · 30H2O crystallization shows the effect of fullerenol-d salting out of saturated solutions; in contrast, the short branch of SmCl3 · 6H2O crystallization shows the pronounced salting-in effect of samarium(III) chloride.

  13. Alkaline and alkaline earth metal phosphate halides and phosphors

    Science.gov (United States)

    Lyons, Robert Joseph; Setlur, Anant Achyut; Cleaver, Robert John

    2012-11-13

    Compounds, phosphor materials and apparatus related to nacaphite family of materials are presented. Potassium and rubidium based nacaphite family compounds and phosphors designed by doping divalent rare earth elements in the sites of alkaline earth metals in the nacaphite material families are descried. An apparatus comprising the phosphors based on the nacaphite family materials are presented herein. The compounds presented is of formula A.sub.2B.sub.1-yR.sub.yPO.sub.4X where the elements A, B, R, X and suffix y are defined such that A is potassium, rubidium, or a combination of potassium and rubidium and B is calcium, strontium, barium, or a combination of any of calcium, strontium and barium. X is fluorine, chlorine, or a combination of fluorine and chlorine, R is europium, samarium, ytterbium, or a combination of any of europium, samarium, and ytterbium, and y ranges from 0 to about 0.1.

  14. Reductive trapping of [(OC){sub 5}W-W(CO){sub 5}]{sup 2-} in a mixed-valent Sm{sup II/III} calix[4]pyrrolide sandwich

    Energy Technology Data Exchange (ETDEWEB)

    Deacon, Glen B.; Guo, Zhifang [School of Chemistry, Monash University, VIC (Australia); Junk, Peter C.; Wang, Jun [College of Science and Engineering, James Cook University, Townsville, QLD (Australia)

    2017-07-10

    Reduction of tungsten hexacarbonyl by the divalent samarium(II) complex [Sm{sub 2}(N{sub 4}Et{sub 8})(thf){sub 4}] ((N{sub 4}Et{sub 8}){sup 4-}=meso-octaethylcalix[4]pyrrolide) in toluene at ambient temperature gave the remarkable heteronuclear mixed-valent samarium(II/III)/tungsten complex [{(thf)_2Sm"I"I(N_4Et_8)Sm"I"I"I(thf)}{sub 2}{(μ-OC)_2W_2(CO)_8}], which features the trapping of a rare [W{sub 2}(CO){sub 10}]{sup 2-} anion with an unsupported W-W bond. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

  15. Preparation and dosimetry of radiotherapeutic particles for arthropaties; Preparacion y dosimetria de particulas radioterapeuticas para artropatias

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Z, M.A. [Departamento de Medicina Nuclear, Instituto Nacional de Pediatria (Mexico); Ferro F, G. [Departamento de Materiales Radiactivos, Instituto nacional de Investigaciones Nucleares, Salazar, Estado de Mexico C.P. 52045 (Mexico); Rivera M, T.; Azorin N, J. [Departamento de Fisica, UAM Iztapalapa, Mexico D.F. (Mexico)

    1999-07-01

    It was developed a new formulation of macro aggregates of Samarium 153 ({sup 153} Sm-MH) for the arthropaties treatment. The radio pharmaceutic was prepared by reaction of Samarium 153 chloride (SmCl{sub 3}) in aqueous environment with sodium boron hydride in NaOH 0.5 N. The microscopic analysis shown that the particles have an average size of 4% m (range 1-14 {mu} m). The velocity of sedimentation was 0.008 cm/min with high stability in vitro in human serum. The biological studies in healthy rabbits, shown that the complex is retained inside the articulation still eight days after of the administration of the radiopharmaceutical. Likewise, it is presented the data of absorbed dose in the different target organs, which was determined by thermoluminescent dosimetry (TLD) through the use of a REMCAL phantom (radiation equivalent manikin calibration). (Author)

  16. Ion-exchange separation of the rare earth elements by means of solution of ammonium phthalate and chloride

    Energy Technology Data Exchange (ETDEWEB)

    Hubicki, W.; Ozga, W. (Uniwersytet Marii Curie-Sklodowskiej, Lublin (Poland))

    1976-01-01

    A new method of ion exchange separation of lanthanons by the use of equimolar solution of ammonium phthalate and ammonium chloride as an eluent was elaborated. This method allows to separate light lanthanons and to obtain concentrate of samarium and heavy lanthanons. 99.99% Y/sub 2/O/sub 3/ was obtained from non-neodymium concentration with 47.4% efficiency. The influence of change in concentration and pH of eluent on the effectiveness of separation was examined. It was found that an increase in concentration of eluent and pH leads to quick separation of yttrium from samarium and heavy lanthanons. However, the efficiency of pure Y/sub 2/O/sub 3/ decreases distinctly.

  17. Large directional optical anisotropy in multiferroic ferroborate

    Science.gov (United States)

    Kuzmenko, A. M.; Dziom, V.; Shuvaev, A.; Pimenov, Anna; Schiebl, M.; Mukhin, A. A.; Ivanov, V. Yu.; Gudim, I. A.; Bezmaternykh, L. N.; Pimenov, A.

    2015-11-01

    One of the most fascinating and counterintuitive recent effects in multiferroics is directional anisotropy, the asymmetry of light propagation with respect to the direction of propagation. In such case the absorption in a material can be different for opposite directions. Besides absorption, different velocities of light for different directions of propagation may be also expected, which is termed directional birefringence. In this work, we demonstrate large directional anisotropy in multiferroic samarium ferroborate. The effect is observed for linear polarization of light in the range of millimeter wavelengths, and it survives down to low frequencies. The dispersion and absorption close to the electromagnon resonance can be controlled by external magnetic field and are fully suppressed in one direction. By changing the geometry of the external field, samarium ferroborate shows giant optical activity, which makes this material a universal tool for optical control: with a magnetic field as an external parameter it allows switching between two functionalities: polarization rotation and directional anisotropy.

  18. Ionic liquid technology for recovery and separation of rare earths

    OpenAIRE

    Binnemans, Koen

    2015-01-01

    End-of-life neodymium-iron-boron and samarium-cobalt permanent magnets, fluorescent lamps and metal hydride batteries are valuable secondary resources of rare earths. These resources are characterised by relatively small volumes, but high concentrations of rare earths [1]. On the other hand, industrial process residues such as bauxite residue (red mud) and phosphogypsum contain low concentrations of rare earths, but are available in huge volumes [2]. Recovery of rare earths from end-of-life c...

  19. Ternary rare earth-lanthanide sulfides

    Science.gov (United States)

    Takeshita, Takuo; Gschneidner, Jr., Karl A.; Beaudry, Bernard J.

    1987-01-06

    A new ternary rare earth sulfur compound having the formula: La.sub.3-x M.sub.x S.sub.4 where M is a rare earth element selected from the group europium, samarium and ytterbium and x=0.15 to 0.8. The compound has good high-temperature thermoelectric properties and exhibits long-term structural stability up to 1000.degree. C.

  20. Structural and physical properties of Sm doped magnesium zinc ...

    Indian Academy of Sciences (India)

    2017-09-22

    Sep 22, 2017 ... Abstract. Samarium (Sm3+) doped magnesium zinc sulfophosphate glass system of composition (60–x)P2O5–20MgO–. 20ZnSO4–xSm2O3 (x = 0.0, 0.5, 1.0, 1.5 and 2.0 mol%) were synthesized using melt-quenching technique. The structure and physical properties of prepared glass samples were ...

  1. Structural aspects of displacive transformations: what can optical microscopy contribute? Dehydration of Sm2(C2O4)3·10H2O as a case study.

    Science.gov (United States)

    Matvienko, Alexander A; Maslennikov, Daniel V; Zakharov, Boris A; Sidelnikov, Anatoly A; Chizhik, Stanislav A; Boldyreva, Elena V

    2017-09-01

    For martensitic transformations the macroscopic crystal strain is directly related to the corresponding structural rearrangement at the microscopic level. In situ optical microscopy observations of the interface migration and the change in crystal shape during a displacive single crystal to single crystal transformation can contribute significantly to understanding the mechanism of the process at the atomic scale. This is illustrated for the dehydration of samarium oxalate decahydrate in a study combining optical microscopy and single-crystal X-ray diffraction.

  2. The growth and reactivity of the {Sm}/{Si(100)} interface

    Science.gov (United States)

    Onsgaard, J.; Christiansen, M.; Ørskov, F.; Godowski, P. J.

    1991-05-01

    The growth of the {Sm}/{Si(100)} interface is described and discussed in the context of the increasing experimental insight into lanthanide/semiconductor interfaces. Silicide formation takes place in the 1 to 5 monolayers coverage region. Different ordered structures, dependent on the initial coverage and temperature treatment, are observed. Oxygen adsorption and binding is strongly promoted, both when Sm is present at the surface and when oxygen reacts with a samarium-suicide film.

  3. Installation of electric generators on turbine engines

    Science.gov (United States)

    Demel, H. F.

    1983-01-01

    The installation of generators on turbine aircraft is discussed. Emphasis is placed on the use of the samarium cobalt generator. Potential advantages of an electric secondary power system at the engine level are listed. The integrated generator and the externally mounted generator are discussed. It is concluded that the integrated generator is best used in turbojet and low bypass ratio engines where there is no easy way of placing generators externally without influencing frontal areas.

  4. Fabrication of Material and Devices for Very High Density Information Storage.

    Science.gov (United States)

    1986-11-24

    crystal bismuth doped garnets , having properties equivalent to IPE grown materials,,’., onto gadolinium gallium garnet substrates. There was speculation... LPE onto0 (111)-.""’’ oriented calcium-, magnesium- or zirconium-substituted gadolinium, samarium or neodymium gallium /’’’ garnet substrates. Garnet ...properties of LPE garnetmusesit favor garnets a s a t arting poiut. ref og Vmagnetic and m g e-optical po et s o a- , pae d m u , alu inu-%, li

  5. Macrocyclic aminophosphonic acid complexes, their preparation, formulations and use; Fremgangsmaate for fremstilling av et makrocyklisk aminofosfonsyrekompleks eller et fysiologisk akseptabelt salt derav

    Energy Technology Data Exchange (ETDEWEB)

    Simon, J.; Wilson, D.A.; Garlich, J.R.; Troutner, D.E.

    1997-01-13

    Particle emitting radionuclides, e.g. Samarium-153, have been complexed with certain macrocyclic aminophosphonic acids wherein the nitrogen and phosphorus are interconnected by an alkylene group or substituted alkylene group. A composition is now disclosed which comprises a complex having a macrocyclic aminophosphonic acid, containing 1,4,7,10-tetraazycyclododecane as the macrocyclic moiety, or a physiologically, acceptable salt thereof, wherein the nitrogen and phosphorus are interconnected by an alkylene or substituted alkylene radical. 10 tabs.

  6. Effect of Flake Thickness on Coercivity of Nanocrystalline SmCo5 Bulk Prepared from Anisotropic Nanoflake Powder (Postprint)

    Science.gov (United States)

    2016-08-23

    flake thickness. 15. SUBJECT TERMS rare earth magnets , samarium cobalt magnets , permanent magnets 16. SECURITY CLASSIFICATION OF: 17...nanoflakes have attractive magnetic properties ; coercivity of up to 21 kOe and maximum energy product of up to 22 MGOe.9 Thus, the nanoflake powders...less reported on correlation between nanoflake morphology and final properties of the SmCo5 bulk magnets . In this study, we prepared SmCo5 nanoflakes

  7. Cross sections of deuteron induced reactions on $^{nat}$Sm for production of the therapeutic radionuclide $^{145}$Sm and $^{153}$Sm

    OpenAIRE

    Tárkányi, F.; Hermanne, A.; Takács, S.; Ditrói, F.; Csikai, J.; Ignatyuk, A. V.

    2014-01-01

    At present, targeted radiotherapy (TR) is acknowledged to have great potential in oncology. A large list of interesting radionuclides is identified, including several radioisotopes of lanthanides, amongst them $^{145}$Sm and $^{153}$Sm. In this work the possibility of their production at a cyclotron was investigated using a deuteron beam and a samarium target. The excitation functions of the $^{nat}$Sm(d,x)$^{145153}$Sm reactions were determined for deuteron energies up to 50 MeV using the st...

  8. A statistical analysis of the initial biodistribution of {sup 153}Sm-EDTMP in a canine

    Energy Technology Data Exchange (ETDEWEB)

    Galiano, Eduardo [Department of Physics, Laurentian University, Ramsey Lake Road, Sudbury, Ont., P3E 2C6 (Canada)]. E-mail: egalianoriveros@laurentian.ca; Stradiotto, Marco [Department of Physics, Laurentian University, Ramsey Lake Road, Sudbury, Ont., P3E 2C6 (Canada)

    2005-07-01

    {sup 153}Sm (t{sub 1/2}=46h) emits a 103keV gamma photon and two medium-energy beta particles. Five mCi of Samarium-153 ethylenediaminetetramethylenephosphonic acid ({sup 153}Sm-EDTMP) were administered to a clinically normal dog and whole body scans were obtained at 15min, 2h, and 24h post-injection (PI). Regions of interest (ROIs) were drawn representing abdomen, knee, rib, vertebral bodies, bladder, kidney, and liver, in each image. For each ROI, the mean intensity and standard deviation were computed, and a histogram was created. Clinically significant increased uptakes were found in liver and kidney.

  9. Coprecipitation experiment with Sm hydroxide using a multitracer produced by nuclear spallation reaction: A tool for chemical studies with superheavy elements.

    Science.gov (United States)

    Kasamatsu, Yoshitaka; Yokokita, Takuya; Toyomura, Keigo; Shigekawa, Yudai; Haba, Hiromitsu; Kanaya, Jumpei; Huang, Minghui; Ezaki, Yutaka; Yoshimura, Takashi; Morita, Kosuke; Shinohara, Atsushi

    2016-12-01

    To establish a new methodology for superheavy element chemistry, the coprecipitation behaviors of 34 elements with samarium hydroxide were investigated using multitracer produced by a spallation of Ta. The chemical reactions were rapidly equilibrated within 10s for many elements. In addition, these elements exhibited individual coprecipitation behaviors, and the behaviors were qualitatively related to their hydroxide precipitation behaviors. It was demonstrated that the ammine and hydroxide complex formations of superheavy elements could be investigated using the established method. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Radiological response of lanthanum guiding seeds in brachytherapy implants; Resposta radiologica de sementes guia de lantanio em implantes braquiterapicos

    Energy Technology Data Exchange (ETDEWEB)

    Silva, L.S.R.; Machado, E.D.P., E-mail: lais26@globo.com [Centro Federal de Educacao Tecnologica de Minas Gerais, Belo Horizonte, MG (Brazil). Departamento de Engenharia de Materiais; Campos, T.P.R. [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear; Roberto, W.S. [Centro Federal de Educacao Tecnologica de Minas Gerais, Belo Horizonte, MG (Brazil). Departamento de Fisica e Matematica

    2013-08-15

    Ceramic seeds with La-139 incorporated were synthesized to be used as radiological guides in brachytherapy implants. The synthesis was performed based on the sol-gel method. The seeds were subjected to characterization by Scanning Electron Microscopy, X-ray diffraction and Energy-Dispersive X-ray Spectroscopy. Furthermore, the contrast from a radiographic film was evaluated to lanthanum, samarium and holmium seeds. Radiological response on a phantom at different depths with lanthanum seeds and metal seeds was also investigated. Based on the values of contrast, the synthesized lanthanum seeds can be considered efficient as radiological guides when implanted together with pure Ho-165 and Sm-152 seeds. (author)

  11. Understanding the photoluminescence characteristics of Eu{sup 3+}-doped double-perovskite by electronic structure calculation

    Energy Technology Data Exchange (ETDEWEB)

    Ghosh, Binita [St. Paul’s Cathedral Mission College, 33/1Raja Rammohan Roy Road, Kolkata 700009 (India); Halder, Saswata; Sinha, T. P. [Department of Physics, Bose Institute, 93/1 Acharya Prafulla Chandra Road, Kolkata 700009 (India); Das, Sayantani [Department of Physics, University of Calcutta, 92 Acharya Prafulla Chandra Road, Kolkata 700009 (India)

    2016-05-23

    Europium-doped luminescent barium samarium tantalum oxide Ba{sub 2}SmTaO{sub 6} (BST) has been investigated by first-principles calculation, and the crystal structure, electronic structure, and optical properties of pure BST and Eu-doped BST have been examined and compared. Based on the calculated results, the luminescence properties and mechanism of Eu-doped BST has been discussed. In the case of Eu-doped BST, there is an impurity energy band at the Fermi level, which is formed by seven spin up energy levels of Eu and act as the luminescent centre, which is evident from the band structure calculations.

  12. Geochronology and structuring of the Ceara State: Borborema Province northwestern part, NE Brazil; Geocronologia e estruturacao do estado do Ceara: NW da provincia Borborema, NE, Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Fetter, A.; Van Schmus, W.R. [Kansas Univ., Lawrence, KS (United States). Dept. of Geology; Santos, Ticiano J. Saraiva dos [UNESP, Rio Claro, SP (Brazil). Inst. de Geociencias e Ciencias Exatas; Arthaud, M.; Nogueira Neto, J. [Ceara Univ., Fortaleza, CE (Brazil). Dept. de Geologia

    1997-12-31

    The work confirms that the geochronological new data U/Pb in zircon and Samarium/Neodymium from the Ceara State furnished a refined chronology of the geological activity in the NW part of the Borborema Province, indicating an evolutive history since 2,78 Ga and 532 Ma. Furthermore, these data facilitated the different crust domain outlines in the region, putting age maximum limits in the pre-brasilianas supracrusts rocks deposition, and evidencing the epoch and duration of the Brasiliano magmatism and metamorphism in the northwest part of the State

  13. Structural aspects of displacive transformations: what can optical microscopy contribute? Dehydration of Sm2(C2O43·10H2O as a case study

    Directory of Open Access Journals (Sweden)

    Alexander A. Matvienko

    2017-09-01

    Full Text Available For martensitic transformations the macroscopic crystal strain is directly related to the corresponding structural rearrangement at the microscopic level. In situ optical microscopy observations of the interface migration and the change in crystal shape during a displacive single crystal to single crystal transformation can contribute significantly to understanding the mechanism of the process at the atomic scale. This is illustrated for the dehydration of samarium oxalate decahydrate in a study combining optical microscopy and single-crystal X-ray diffraction.

  14. Synthesis and application of a new fluorous-tagged ammonia equivalent

    DEFF Research Database (Denmark)

    Nielsen, Simon Dalsgaard; Smith, Garrick; Begtrup, Mikael

    2010-01-01

    A novel fluorous-tagged ammonia equivalent has been developed. It is based on a nitrogen-oxygen bond, which can be cleaved in a traceless manner by a molybdenum complex or samarium diiodide. The application in the synthesis of ureas, amides, sulfonamides, and carbamates is described. The scope of...... of the fluorous N--O linker is exemplified by the synthesis of itopride, a drug used for the treatment of functional dyspepsia. Itopride was synthesized with the aid of fluorous purification methods and the product was isolated in good overall yield, with high purity....

  15. Synthesis and application of a new fluorous-tagged ammonia equivalent.

    Science.gov (United States)

    Nielsen, Simon D; Smith, Garrick; Begtrup, Mikael; Kristensen, Jesper L

    2010-04-19

    A novel fluorous-tagged ammonia equivalent has been developed. It is based on a nitrogen-oxygen bond, which can be cleaved in a traceless manner by a molybdenum complex or samarium diiodide. The application in the synthesis of ureas, amides, sulfonamides, and carbamates is described. The scope of the fluorous N-O linker is exemplified by the synthesis of itopride, a drug used for the treatment of functional dyspepsia. Itopride was synthesized with the aid of fluorous purification methods and the product was isolated in good overall yield, with high purity. Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Jaderné kolektivní stupně volnosti a Skyrme funkcionál

    OpenAIRE

    Božík, Daniel

    2010-01-01

    Title: Energy functional theories in nuclear physics Author: Daniel Božík Department: Institute of Particle and Nuclear Physics of Charles University Supervisor: prof. RNDr. Jan Kvasil, DrSc. Supervisor's e-mail address: Abstract: In the present work we study the giant resonances of the chain of even-even samarium nuclei 144−154 Sm. The numerical calculations are provided by a chain of numer- ical codes. Mean field is calculated by the HFB method for the Skyrme d...

  17. Geochronology Intermediary Laboratory implantation at the Rio Grande do Norte Federal University: the dating of the Serrinha Granitoid (RN) and the correlate Brasiliana extensional deformation; Implantacao do Laboratorio Intermediario de Geocronologia na UFRN: a datacao do granitoide de Serrinha (RN) e da deformacao extensional brasiliana correlata

    Energy Technology Data Exchange (ETDEWEB)

    Macedo, Maria Helena F.; Sa, Emanuel F. Jardim de; Souza, Zorano S. [Pernambuco Univ., Recife, PE (Brazil). Nucleo de Pesquisa em Geodinamica e Geofisica; Mendes, Franklin S. [Pernambuco Univ., Recife, PE (Brazil). Curso de Quimica; Ramalho, Karlos A.C. [Pernambuco Univ., Recife, PE (Brazil). Curso de Geologia

    1997-12-31

    The article describes the activities developed by the Geochronology Intermediary Laboratory at the Federal University of the Rio Grande do Norte, a Brazilian university, where there were the preoccupation of establishing strategies for a geochronological development. It relates the Rubidium-Strontium (Rb/Sr) and Samarium-Neodymium (Sm/Nd) methods, describing the analysis realized in these methodologies. Afterward, it presents the geological and petrographic situation of the Granitoide de Serrinha, located at Rio Grande do Norte State, Brazil and its geochronological data 8 refs., 2 figs.

  18. ACR-ASTRO practice guideline for the performance of therapy with unsealed radiopharmaceutical sources.

    Science.gov (United States)

    Henkin, Robert E; Del Rowe, John D; Grigsby, Perry W; Hartford, Alan C; Jadvar, Hossein; Macklis, Roger M; Parker, J Anthony; Wong, Jeffrey Y C; Rosenthal, Seth A

    2011-08-01

    This guideline is intended to guide appropriately trained and licensed physicians performing therapy with unsealed radiopharmaceutical sources. Adherence to this guideline should help to maximize the efficacious use of these procedures, maintain safe conditions, and ensure compliance with applicable regulations. The topics dealt with in this guideline include indications for the use of iodine-131, both for the treatment of hyperthyroidism and thyroid carcinoma. In addition, indications for other less common procedures include those for the use of phosphorous-32 in its liquid and colloidal forms, strontium-89, samarium-153, and the use of Y-90 antibodies.

  19. Accumulation of rare earth elements by siderophore-forming Arthrobacter luteolus isolated from rare earth environment of Chavara, India.

    Science.gov (United States)

    Emmanuel, E S Challaraj; Ananthi, T; Anandkumar, B; Maruthamuthu, S

    2012-03-01

    In this study, Arthrobacter luteolus, isolated from rare earth environment of Chavara (Quilon district, Kerala, India), were found to produce catechol-type siderophores. The bacterial strain accumulated rare earth elements such as samarium and scandium. The siderophores may play a role in the accumulation of rare earth elements. Catecholate siderophore and low-molecular-weight organic acids were found to be present in experiments with Arthrobacter luteolus. The influence of siderophore on the accumulation of rare earth elements by bacteria has been extensively discussed.

  20. Synthesis of 2-(9,10-Dihydro-9,10-propanoanthracen-9-yl-N-methylethanamine via a [4+2] Cycloaddition

    Directory of Open Access Journals (Sweden)

    Usama Karama

    2010-06-01

    Full Text Available The synthesis of the tetracyclic molecule 2-(9,10-dihydro-9,10-propano-anthracen-9-yl-N-methylethanamine(2as a homologue of the antidepressant 1-(9,10-dihydro-9,10-ethanoanthracen-9-yl-N-methylmethaneamine (1 was described. The key intermediate 9-(prop-2-en-1-yl-9,10-dihydro-9,10-propanoanthracen-12-one (7was successfully synthesized via a [4+2] cycloaddition of α-bromoacrolein and 9-allyl-anthracene, followed by ring expansion and samarium diiodide deoxygenation.

  1. Synthesis of 2-(9,10-dihydro-9,10-propanoanthracen-9-yl)-N-methylethanaminevia a [4+2] cycloaddition.

    Science.gov (United States)

    Karama, Usama; Al-Saidey, Adel; Al-Othman, Zeid; Almansour, Abdel Rahman

    2010-06-09

    The synthesis of the tetracyclic molecule 2-(9,10-dihydro-9,10-propano-anthracen-9-yl)-N-methylethanamine (2) as a homologue of the antidepressant 1-(9,10-dihydro-9,10-ethanoanthracen-9-yl)-N-methylmethaneamine (1) was described. The key intermediate 9-(prop-2-en-1-yl)-9,10-dihydro-9,10-propanoanthracen-12-one (7) was successfully synthesized via a [4+2] cycloaddition of alpha-bromoacrolein and 9-allyl-anthracene, followed by ring expansion and samarium diiodide deoxygenation.

  2. SPECTROSCOPIC PROPERTIES OF THE Ln-Ge COMPLEXES WITH DIETHYLENETRIAMINEPENTAACETIC ACID

    Directory of Open Access Journals (Sweden)

    Sergiy Smola

    2007-06-01

    Full Text Available Four new heteronuclear lanthanide complexes with general formula [Ge(OH(μ-HDTPALnGe(OH (μ-DTPA] (Ln = Sm – Dy were synthesized and subsequently characterized by different physico- chemical methods. The structures of new compounds have been proposed. In considered complexes the 4f-luminescence of three-charged ions of samarium, europium, terbium and dysprosium is realized at UV-excitation. It is noteworthy that it is the first observation of 4f-luminescence in water solutions of heteronuclear f-p-complexes. The comparison of luminescent characteristics of hetero- and homonuclear landthanide complexes is described and discussed as well.

  3. Die selfverstaan van die Samaritane soos dit uit- drukking vind in die feesliturgie צלות מוצד השמיני

    Directory of Open Access Journals (Sweden)

    J. Beyers

    1999-01-01

    Full Text Available The self-understanding of the Samaritans, as expressed in the liturgy of the צלות מוצד השמיני festivalThis study is concerned with the identity and religion of the Samaritans. The way in which the Samaritans understood their identity is highlighted by their perception of God, by the traditions they adhered to and by the selection of texts from the Pentateuch they used in their liturgy. The beliefs and rituals of the Samarium faith found their way into the Samaritan Liturgy. The study of a part of the Samaritan Liturgy shows that the Samaritans are heirs to the religion of the northern tibes of Israel.

  4. Development of atomic spectroscopy technology -Development of ultrasensitive spectroscopic analysis technology

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Hyung Kee; Song Kyoo Suk; Kim, Duk Hyun; Hong, Suk Kyung; Lee, Yong Joo; Lee, Jong Hoon; Yang, Kee Hoh [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-07-01

    For the resonance ionization spectroscopy experiment, erbium and samarium were chosen as test elements and their optimum photoionization schemes for trace analysis have been investigated by using multiphoton spectroscopic techniques. With the optimum scheme, the detection limit of various atoms were measured. For the test of laser induced fluorescence system, calibration curves obtained from lead and cadmium standard solutions were made and Pb concentrations of various unknown solutions were determined. By using the developed differential absorption lidar system, backscattering signals from aerosol and ozone have been measured. Error source, error calibration and data interpretation techniques have been also studied. 60 figs, 8 pix, 28 tabs, 30 refs. (Author).

  5. Detection of rare earth elements in Powder River Basin sub-bituminous coal ash using laser-induced breakdown spectroscopy (LIBS)

    Energy Technology Data Exchange (ETDEWEB)

    Tran, Phuoc [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United State; Mcintyre, Dustin [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United State

    2015-10-01

    We reported our preliminary results on the use of laser-induced breakdown spectroscopy to analyze the rare earth elements contained in ash samples from Powder River Basin sub-bituminous coal (PRB-coal). We have identified many elements in the lanthanide series (cerium, europium, holmium, lanthanum, lutetium, praseodymium, promethium, samarium, terbium, ytterbium) and some elements in the actinide series (actinium, thorium, uranium, plutonium, berkelium, californium) in the ash samples. In addition, various metals were also seen to present in the ash samples

  6. Giant magneto resistance and temperature coefficient of resistance in Sm0.55Sr0.30Ag0.15MnO3 perovskite

    OpenAIRE

    Bhat, Masroor Ahmad; Zargar, Rayees A.; Modi, Anchit; Arora, Manju; Gaur, N K

    2016-01-01

    Silver ions substituted samarium strontium manganite (Sm0.55Sr0.30Ag0.15MnO3) pervoskite was synthesized by using respective oxides in stoichiometric ratio through solid state reaction. The as-prepared sample was characterized by various analytical techniques to confirm its formation and understand the effect of monovalent silver ions in pervoskite lattice. X-ray diffraction pattern confirms the single phase formation while grain morphology in SEM image indicates good connectivity among the g...

  7. Synergistic Effects of Sm and C Co-Doped Mixed Phase Crystalline TiO₂ for Visible Light Photocatalytic Activity.

    Science.gov (United States)

    Peng, Fuchang; Gao, Honglin; Zhang, Genlin; Zhu, Zhongqi; Zhang, Jin; Liu, Qingju

    2017-02-21

    Mixed phase TiO₂ nanoparticles with element doping by Sm and C were prepared via a facile sol-gel procedure. The UV-Vis light-diffuse reflectance spectroscopy analysis showed that the absorption region of co-doped TiO₂ was shifted to the visible-light region, which was attributed to incorporation of samarium and carbon into the TiO₂ lattice during high-temperature reaction. Samarium effectively decreased the anatase-rutile phase transformation. The grain size can be controlled by Sm doping to achieve a large specific surface area useful for the enhancement of photocatalytic activity. The photocatalytic activities under visible light irradiation were evaluated by photocatalytic degradation of methylene blue (MB). The degradation rate of MB over the Sm-C co-doped TiO₂ sample was the best. Additionally, first-order apparent rate constants increased by about 4.3 times compared to that of commercial Degusssa P25 under the same experimental conditions. Using different types of scavengers, the results indicated that the electrons, holes, and •OH radicals are the main active species for the MB degradation. The high visible-light photocatalytic activity was attributed to low recombination of the photo-generated electrons and holes which originated from the synergistic effect of the co-doped ions and the heterostructure.

  8. Molecular electrophosphorescence in (Sm, Gd)-{beta}-diketonate complex blend for OLED applications

    Energy Technology Data Exchange (ETDEWEB)

    Reyes, R., E-mail: fisicaplic@hotmail.com [Facultad de Ingenieria Quimica y Textil, Universidad Nacional de Ingenieria, UNI, Av. Tupac Amaru 210, Lima 31, Peru (Peru); Cremona, M. [DIMAT - Divisao de Metrologia de Materiais, Instituto Nacional de Metrologia, Normalizacao e Qualidade Industrial, INMETRO, Duque de Caxias, RJ (Brazil); Departamento de Fisica, Pontificia Universidade Catolica do Rio de Janeiro, PUC-Rio, C.P. 38071, Rio de Janeiro, RJ, CEP 22453-970 (Brazil); Teotonio, E.E.S. [Departamento de Quimica, CCEN, Universidade Federal da Paraiba, UFPB, C.P. 5093, Joao Pessoa, PB, CEP 5805-970 (Brazil); Brito, H.F. [Instituto de Quimica, Universidade de Sao Paulo, USP, C.P. 26077, Sao Paulo, SP, CEP 05599-970 (Brazil); Malta, O.L. [Departamento de Quimica Fundamental, CCEN, Universidade Federal de Pernambuco, Cidade Universitaria, Recife, PE, CEP 50670-901 (Brazil)

    2013-02-15

    In this work the preparation and characterization of the triple-layer organic light-emitting diode (OLED) using a mixture of the samarium and gadolinium {beta}-diketonate complexes [Sm{sub 0.5}Gd{sub 0.5}(TTA){sub 3}(TPPO){sub 2}] as emitting layer is reported. The OLED's devices contain 1-(3-methylphenyl)-1,2,3,4-tetrahydroquinoline-6-carboxyaldehyde-1, 1'-diphenylhydrazone (MTCD) as hole-transporting layer and tris(8-hydroxyquinoline aluminum) (Alq{sub 3}) as electron transporting layer. The electroluminescence spectrum present emission narrow bands from the {sup 4}G{sub 5/2}{yields}{sup 6}H{sub J} transitions (where J=5/2, 7/2 and 9/2) characteristic of the Sm{sup 3+} ion. These sharp lines are overlapped with a broad band attributed to the electrophosphorescence from the T{sub 1}{yields}S{sub 0} transition in the ligand TTA. The intramolecular energy transfer is discussed and applied on the change of the emission color of the organic LEDs at different bias voltages. - Highlights: Black-Right-Pointing-Pointer Samarium and gadolinium complexes. Black-Right-Pointing-Pointer OLED with complex blend (Sm,Gd). Black-Right-Pointing-Pointer Electrophosphorescence emission detection. Black-Right-Pointing-Pointer Application in OLED changing the color emission.

  9. Spontaneous and stimulated emission in Sm{sup 3+}-doped YAl{sub 3}(BO{sub 3}){sub 4} single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Ryba-Romanowski, Witold [Institute of Low Temperature and Structure Research, Polish Academy of Sciences, Okólna 2, 50-422 Wrocław (Poland); Lisiecki, Radosław, E-mail: R.Lisiecki@int.pan.wroc.pl [Institute of Low Temperature and Structure Research, Polish Academy of Sciences, Okólna 2, 50-422 Wrocław (Poland); Beregi, Elena [Research Institute for Solid State Physics and Optics, Hungarian Academy of Sciences, Budapest (Hungary); Martín, I.R. [Departamento de Física, Instituto de Materiales y Nanotecnología (IMN), Universidad de La Laguna, 38206 S/C de Tenerife, Laguna (Spain)

    2015-11-15

    Single crystals of YAl{sub 3}(BO{sub 3}){sub 4} doped with trivalent samarium were grown by the top-seeded high temperature solution method and their absorption and emission spectra were investigated. Optical pumping into prominent absorption band around 405 nm feeds the {sup 4}G{sub 5/2} metastable level giving rise to intense visible luminescence distributed in several spectral lines with the most intense line around 600 nm characterized by a branching ratio of 0.42 and peak emission cross section of 0.25×10{sup −20} cm{sup 2}. Optical amplification at 600 nm with a gain coefficient of 2.9 cm{sup −1} was achieved during a pump-and-probe experiment. - Highlights: • YAB:Sm crystal grown by the top-seeded high temperature solution method. • Spectroscopic qualities relevant for visible laser operation. • YAB:Sm single crystal used in a pump-and-probe experiment. • Optical amplification properties of samarium doped YAl{sub 3}(BO{sub 3}){sub 4}.

  10. Synthesis of Sm2(WO4)3 nanocrystals via a statistically optimized route and their photocatalytic behavior

    Science.gov (United States)

    Mahdi Pourmortazavi, Seied; Rahimi-Nasrabadi, Mehdi; Aghazadeh, Mustafa; Ganjali, Mohammad Reza; Sadeghpour Karimi, Meisam; Norouzi, Parviz

    2017-03-01

    The application of a Taguchi approach to the optimization of the precipitation reaction between Sm3+ and {{{{WO}}}{{4}}}2- as a rapid procedure for the preparation of Sm2(WO4)3 nanoparticles as a photocatalyst is evaluated. The effect of the prominent operating factors on the product are evaluated so as to yield the best synthesis conditions, leading to the finest product particles of the desired morphologies, which can turn the rather primitive precipitation reaction into a powerful tool for the preparation of nanostructured crystals of insoluble salts. The effects of the alteration of the studied factors on the final properties of the product are further evaluated through characterization techniques, including x-ray diffraction, energy-dispersive x-ray analysis, scanning electron microscopy, transmission electron microscopy and Fourier transform infrared spectroscopy. The results of the study, together with the analysis of variance operations, revealed that through the control of samarium and tungstate concentrations, and temperature, considerable results can be achieved in terms of the product dimensions, morphology, purity and structure. Moreover, the photocatalytic behavior of the synthesized samarium tungstate nanoparticles for the photocatalytic degradation of methylene blue under ultraviolet light is investigated and compared with titanium dioxide as a well-known photocatalyst.

  11. High-pressure synthesis and exotic heavy-fermion behaviour of the filled skutterudite SmPt{sub 4}Ge{sub 12}

    Energy Technology Data Exchange (ETDEWEB)

    Gumeniuk, R; Leithe-Jasper, A; Schnelle, W; Nicklas, M; Rosner, H; Ormeci, A; Burkhardt, U; Schmidt, M; Schwarz, U; Grin, Yu [Max-Planck-Institut fuer Chemische Physik fester Stoffe, Noethnitzer Strasse 40, 01187 Dresden (Germany); Schoeneich, M; Ruck, M, E-mail: schnelle@cpfs.mpg.d [Anorganische Chemie, Technische Universitaet Dresden, 01062 Dresden (Germany)

    2010-10-15

    Ternary samarium-filled platinum-germanium skutterudite SmPt{sub 4}Ge{sub 12} was prepared at a pressure of 5.0(0.5) GPa and a temperature of 1070(70) K. The compound crystallizes in the cubic space group Im 3-bar (a=8.6069(4) A) and is isotypic with LaFe{sub 4}P{sub 12}. X-ray absorption spectroscopy measurements show that samarium in SmPt{sub 4}Ge{sub 12} has a temperature-independent intermediate valence ({nu}=2.90{+-}0.03). Magnetization data reveal Van Vleck paramagnetism above {approx}50 K. The low-temperature specific heat displays a broad anomaly centred at 2.9 K and a large linear coefficient {gamma} ' =450 mJ mol{sup -1} K{sup -2} suggesting heavy-fermion behaviour. Low-temperature electrical resistivity shows a temperature dependence reminiscent of the Kondo effect. Density functional calculations result in an electronic structure that is, apart from the Sm 4f contributions, very similar to LaPt{sub 4}Ge{sub 12}.

  12. Ni-Zn-Sm nanopowder ferrites: Morphological aspects and magnetic properties

    Science.gov (United States)

    Costa, A. C. F. M.; Diniz, A. P. A.; de Melo, A. G. B.; Kiminami, R. H. G. A.; Cornejo, D. R.; Costa, A. A.; Gama, L.

    Ni-Zn ferrites have been widely used in components for high-frequency range applications due to their high electrical resistivity, mechanical strength and chemical stability. Ni-Zn ferrite nanopowders doped with samarium with a nominal composition of Ni 0.5Zn 0.5Fe 2-xSm xO 4 ( x=0.0, 0.05, and 0.1 mol) were obtained by combustion synthesis using nitrates and urea as fuel. The morphological aspects of Ni-Zn-Sm ferrite nanopowders were investigated by X-ray diffraction, nitrogen adsorption by BET, sedimentation, scanning electron microscopy and magnetic properties. The results indicated that the Ni-Zn-Sm ferrite nanopowders were composed of soft agglomerates of nanoparticles with a high surface area (55.8-64.8 m 2/g), smaller particles (18-20 nm) and nanocrystallite size particles. The addition of samarium resulted in a reduction of all the magnetic parameters evaluated, namely saturation magnetization (24-40 emu/g), remanent magnetization (2.2-3.5 emu/g) and coercive force (99.3-83.3 Oe).

  13. Magnetic and magnetoelastic properties of epitaxial SmFe{sub 2} thin film

    Energy Technology Data Exchange (ETDEWEB)

    Fuente, C de la; Arnaudas, J I; Ciria, M; Del Moral, A [Departamento de Magnetismo de Solidos and Departamento de Fisica de la Materia Condensada, Instituto de Ciencia de los Materiales de Aragon and Universidad de Zaragoza, 50071, Zaragoza (Spain); Dufour, C; Dumesnil, K, E-mail: cesar@unizar.e [Laboratoire de Metallurgie Physique et de Science des Materiaux, Universite Henry Poincare, Nancy 1, BP 239, 54506 (France)

    2010-02-03

    We report on magnetic and magnetoelastic measurements for a 5000 A (110) SmFe{sub 2} thin film, which was successfully analyzed by means of a point charge model for describing the effect of the epitaxial growth in this kind of system. Some of the main conclusions of the Moessbauer and magnetoelastic results and the new magnetization results up to 5 T allow us to get a full description of the crystal electric field, exchange, and magnetoelastic behavior in this compound. So, new single-ion parameters are obtained for the crystal field interaction of samarium ions, A{sub 4}(r{sup 4}) = +755 K/ion and A{sub 6}(r{sup 6}) = -180 K/ion, and new single-ion magnetoelastic coupling B{sup gamma}{sup ,2}approx =-200 MPa and B{sup epsilon}{sup ,2}approx =800 MPa, which represent the tetragonal and the in-plane shear deformations, respectively. Moreover, the new thermal behavior of the samarium magnetic moment, the exchange coupling parameter, and the magnetocrystalline anisotropy of the iron sublattice are obtained too. From these, the softening of the spin reorientation transition with respect to the bulk case could be accounted for.

  14. Synergistic Effects of Sm and C Co-Doped Mixed Phase Crystalline TiO2 for Visible Light Photocatalytic Activity

    Directory of Open Access Journals (Sweden)

    Fuchang Peng

    2017-02-01

    Full Text Available Mixed phase TiO2 nanoparticles with element doping by Sm and C were prepared via a facile sol-gel procedure. The UV-Vis light-diffuse reflectance spectroscopy analysis showed that the absorption region of co-doped TiO2 was shifted to the visible-light region, which was attributed to incorporation of samarium and carbon into the TiO2 lattice during high-temperature reaction. Samarium effectively decreased the anatase-rutile phase transformation. The grain size can be controlled by Sm doping to achieve a large specific surface area useful for the enhancement of photocatalytic activity. The photocatalytic activities under visible light irradiation were evaluated by photocatalytic degradation of methylene blue (MB. The degradation rate of MB over the Sm-C co-doped TiO2 sample was the best. Additionally, first-order apparent rate constants increased by about 4.3 times compared to that of commercial Degusssa P25 under the same experimental conditions. Using different types of scavengers, the results indicated that the electrons, holes, and •OH radicals are the main active species for the MB degradation. The high visible-light photocatalytic activity was attributed to low recombination of the photo-generated electrons and holes which originated from the synergistic effect of the co-doped ions and the heterostructure.

  15. Viability of biocompatible and biodegradable seeds production with incorporated radionuclides; Viabilidade da producao de sementes biocompativeis e biodegradaveis com radionuclideos incorporados

    Energy Technology Data Exchange (ETDEWEB)

    Roberto, W.S. [Centro Federal de Educacao Tecnologica de Ouro Preto (CEFET/OP), MG (Brazil); Pereira, M.M.; Vasconcelos, W.L.; Campos, T.P.R. [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil)], e-mail: wanderley@nuclear.ufmg.br

    2000-07-01

    The present work aims the development of radioactive seeds, biocompatible and biodegradable, with the objective of adding options in the cancer treatment. The work focus on the production of seeds biodegradable that incorporate radioisotopes with half life inferior than the degradation time of the material. The idea of producing devices with biodegradable materials impregnated with radioisotopes of short half life will offer new possibilities in the cancer treatment, since they can be used following the same procedures of the permanent interstitial brachytherapy, but using degradable materials compatible with the physiological environment. It will be discussed in particular the possible application of these seeds in the treatment of prostate cancer. A review of the subject and a preliminary evaluation of the viability of production of the seeds will be presented. The method of production of the seeds is based on the incorporation of Iodine and Samarium in glass matrixes obtained by sol-gel processing. X-ray fluorescence was done in the samples produced and the incorporation of Iodine and Samarium atoms was confirmed. (author)

  16. Scanning Electron Microscope-Cathodoluminescence Analysis of Rare-Earth Elements in Magnets.

    Science.gov (United States)

    Imashuku, Susumu; Wagatsuma, Kazuaki; Kawai, Jun

    2016-02-01

    Scanning electron microscope-cathodoluminescence (SEM-CL) analysis was performed for neodymium-iron-boron (NdFeB) and samarium-cobalt (Sm-Co) magnets to analyze the rare-earth elements present in the magnets. We examined the advantages of SEM-CL analysis over conventional analytical methods such as SEM-energy-dispersive X-ray (EDX) spectroscopy and SEM-wavelength-dispersive X-ray (WDX) spectroscopy for elemental analysis of rare-earth elements in NdFeB magnets. Luminescence spectra of chloride compounds of elements in the magnets were measured by the SEM-CL method. Chloride compounds were obtained by the dropwise addition of hydrochloric acid on the magnets followed by drying in vacuum. Neodymium, praseodymium, terbium, and dysprosium were separately detected in the NdFeB magnets, and samarium was detected in the Sm-Co magnet by the SEM-CL method. In contrast, it was difficult to distinguish terbium and dysprosium in the NdFeB magnet with a dysprosium concentration of 1.05 wt% by conventional SEM-EDX analysis. Terbium with a concentration of 0.02 wt% in an NdFeB magnet was detected by SEM-CL analysis, but not by conventional SEM-WDX analysis. SEM-CL analysis is advantageous over conventional SEM-EDX and SEM-WDX analyses for detecting trace rare-earth elements in NdFeB magnets, particularly dysprosium and terbium.

  17. Uptake and effect of rare earth elements on gene expression in Methylosinus trichosporium OB3b.

    Science.gov (United States)

    Gu, Wenyu; Farhan Ul Haque, Muhammad; DiSpirito, Alan A; Semrau, Jeremy D

    2016-07-01

    It is well known that Methylosinus trichosporium OB3b has two forms of methane monooxygenase (MMO) responsible for the initial conversion of methane to methanol, a cytoplasmic (soluble) methane monooxygenase and a membrane-associated (particulate) methane monooxygenase, and that copper strongly regulates expression of these alternative forms of MMO. More recently, it has been discovered that M. trichosporium OB3b has multiple types of the methanol dehydrogenase (MeDH), i.e. the Mxa-type MeDH (Mxa-MeDH) and Xox-type MeDH (Xox-MeDH), and the expression of these two forms is regulated by the availability of the rare earth element (REE), cerium. Here, we extend these studies and show that lanthanum, praseodymium, neodymium and samarium also regulate expression of alternative forms of MeDH. The effect of these REEs on MeDH expression, however, was only observed in the absence of copper. Further, a mutant of M. trichosporium OB3b, where the Mxa-MeDH was knocked out, was able to grow in the presence of lanthanum, praseodymium and neodymium, but was not able to grow in the presence of samarium. Collectively, these data suggest that multiple levels of gene regulation by metals exist in M. trichosporium OB3b, but that copper overrides the effect of other metals by an as yet unknown mechanism. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  18. Threshold sensitivity of quartz variometers with negative feedback

    Science.gov (United States)

    Odintsov, V. I.; Petrov, V. G.

    2017-05-01

    The maximum achievable parameters of magnetometers based on optomechanical quartz variometers are studied in connection with the planned transition of the international network Intermagnet to 1-s recording and the need to provide the network of Russian geomagnetic observatories with domestic magnetometers that satisfy Intermagnet requirements. The mechanism of negative feedback effect on the sensitivity threshold of a variometer with an optoelectronic angle transducer is shown. The optimization criterion for the size and shape of the magnets made of different magnetic materials is defined by the maximum ratio of the magnetic moment to the inertial moment. Theoretical and experimental evaluation of the variometer noise level is based on vicalloy and samarium-cobalt. It is shown that the frequency range of magnetometers with variometers based on vicalloy and samarium-cobalt will be bounded from above by frequencies of 1.6 and 6.4 Hz, respectively, at a threshold sensitivity of about 1 pT. These ratios of the frequency and threshold sensitivity for the given magnetic materials are probably limited for quartz variometers with an optoelectronic angle transducer.

  19. Measurement of solubility of plutonium trifluoride and rare-earth fluorides in molten LiF-BeF{sub 2}-ZrF{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Naumov, V.S.; Bychkov, A.V.; Kormilitsyn, M.V. [and others

    1996-12-01

    Data on behavior of plutonium fluoride and fission products (FP) dissolved in fuel composition are needed to calculate the duration of an operating cycle of the ADTT facility (Accelerator-Driver Transmutation Technologies) and to determine the effect of their equilibrium concentrations on nuclear-physical characteristics of reactor operation. The data on the FP fluoride solubility in the molten salts are of great important for some industrial processes (electrolytical metal deposition, development of physical-chemical mean for processes of chemical technology, etc.) As noted above, some information on this question is given in monography and articles. Data concerning fluoride salts are given in reports. However, it was impossible to make the substantial analysis of mutual solubility of fluoride melts. The primary investigation of CeF{sub 3} and neodymium, samarium and lanthanum fluorides showed that the solubility of the melt LiF-BeF{sub 2} and LiF-BeF{sub 2}-ThF{sub 4} was a linear function of reverse temperature and increases from lanthanum to samarium in the row of rare-earth elements. Disagreement in estimation of plutonium trifluoride solubility and incomplete data on the solubility of rare-earth elements prompted this study.

  20. Determination of the Speciation and Bioavailability of Sm to Chlamydomonas reinhardtii in the Presence of Natural Organic Matter.

    Science.gov (United States)

    Rowell, Justine-Anne; Fillion, Marc-Alexandre; Smith, Scott; Wilkinson, Kevin J

    2018-02-03

    As technological interest and environmental emissions of the rare earth elements (REE) increase, it is becoming more important to assess their potential environmental impact. Samarium (Sm) is a lanthanide of intermediate molar mass that is used in numerous high technology applications including wind turbines, solar panels and electric vehicles. The present study relates the speciation of samarium (Sm) determined in the presence of natural organic matter (NOM) to its bioavailability to the unicellular green alga, Chlamydomonas reinhardtii. The free ion concentration was determined using a cation exchange resin (IET) in dynamic mode and compared to thermodynamic modelling. Short-term biouptake experiments were performed in the presence of 4 types of NOM: Suwannee River fulvic acids, Pahokee Peat fulvic acids, Suwannee River humic acids and a Luther Marsh dissolved organic matter isolate (90-95% humic acids). The results clearly showed that even a small amount of NOM (0.5 mg C L-1 ) resulted in a significant decrease (10x) in the Sm internalization fluxes. Furthermore, complexation with humic acids (and the corresponding reduction in Sm bioavailability) was stronger than for the fulvic acids. The results showed that the experimentally measured (free) Sm was a better predictor of Sm internalization than either the total concentrations or the free ion concentrations obtained using thermodynamic modelling. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  1. Improved transistor-controlled and commutated brushless DC motors for electric vehicle propulsion

    Science.gov (United States)

    Demerdash, N. A.; Miller, R. H.; Nehl, T. W.; Nyamusa, T. A.

    1983-01-01

    The development, design, construction, and testing processes of two electronically (transistor) controlled and commutated permanent magnet brushless dc machine systems, for propulsion of electric vehicles are detailed. One machine system was designed and constructed using samarium cobalt for permanent magnets, which supply the rotor (field) excitation. Meanwhile, the other machine system was designed and constructed with strontium ferrite permanent magnets as the source of rotor (field) excitation. These machine systems were designed for continuous rated power output of 15 hp (11.2 kw), and a peak one minute rated power output of 35 hp (26.1 kw). Both power ratings are for a rated voltage of 115 volts dc, assuming a voltage drop in the source (battery) of about 5 volts. That is, an internal source voltage of 120 volts dc. Machine-power conditioner system computer-aided simulations were used extensively in the design process. These simulations relied heavily on the magnetic field analysis in these machines using the method of finite elements, as well as methods of modeling of the machine power conditioner system dynamic interaction. These simulation processes are detailed. Testing revealed that typical machine system efficiencies at 15 hp (11.2 kw) were about 88% and 84% for the samarium cobalt and strontium ferrite based machine systems, respectively. Both systems met the peak one minute rating of 35 hp.

  2. Study of rare earth separation by counter current electromigration; Estudo da separacao de terras raras por eletromigracao em contra corrente

    Energy Technology Data Exchange (ETDEWEB)

    Correa, Sergio Machado

    1995-08-01

    The counter current electromigration (CCEM) is an electrophoretic technique where the charged species migrate on an electrical field toward an electrolytic flux. Usually this electrolyte is a complexing agent and is necessary to increase the small differences between the species mobilities. A new column was developed, all made of acrylic, in a cylindrical shape. A set of experiments was carried out with the species Na{sup +}/K{sup +}, K{sup +}/Sm{sup +3}, K{sup +}/Eu{sup +3} and K{sup +}/Sm{sup +3}/Eu{sup +3} using the {alpha}-hydrox i-isobutyric acid o,01 M as the counter current electrolytic flux. From a synthetic mixture of 90% of samarium and 10% of europium was obtained the samarium ion in a purity better than 99,9% where the concentration of Eu was determined by the polarography technique. The potassium ion was used as a leading electrolyte. It was also measured the mobilities of the involved species in the {alpha}-HIBA medium. Two models are proposed, a stationary model and a dynamic one. A simulator of a simplified stationary model, prepared in FORTRAN language, was developed and tested toward experimental results. (author)

  3. OXIDATIVE DEHYDROGENATION OF PROPANE BY RARE EARTH PHOSPHATES SUPPORTED ON AL-PILC

    Directory of Open Access Journals (Sweden)

    Carolina De Los Santos

    2012-12-01

    Full Text Available Catalytic activity in propane oxidative dehydrogenation of rare earth phosphates LnPO4 (where Ln = La, Ce, Pr, Nd, Sm and of the same supported by an aluminum pillared clay, of high specific surface area, is presented. The solids were characterized by TGA, XRD, nitrogen adsorption and immediate analysis after reaction in order to determine eventual carbon formation. Catalytic assays were performed at temperatures in the range 400oC-600oC, the reaction mixture was C3H8/O2/Ar = 10/10/80. All the catalysts were active. The reaction products were H2, CO, CO2, CH4, C2H4 and C3H6 and there were no organic oxygenated compounds detected. Although all the investigated systems were active, the Al-PILC supported catalysts presented a higher activity than the bulk materials. In this context, the samarium supported catalyst showed a propene yield increase from 4% to 10% compared with bulk samarium phosphate at 600°C. This effect was attributed to the increase in the specific surface area.

  4. Studies of Some Lanthanide(III Nitrate Complexes of Schiff Base Ligands

    Directory of Open Access Journals (Sweden)

    Kishor Arora Mukesh Sharma

    2009-01-01

    Full Text Available The studies of 16 new lanthanide(III nitrate complexes of Schiff base ligands are discussed. Schiff bases were obtained by the condensation of 2–methyl–4–N,N–bis–2' –cyanoethyl aminobenzaldehyde with aniline and 3 different substituted anilines. Lanthanide(III nitrates, viz. gadolinium(III nitrate, lanthanum(III nitrate, samarium(III nitrate and cerium(III nitrate were chosen to synthesize new complexes. The complexes were characterized on the basis of physicochemical studies viz. elemental analysis, spectral, viz. IR and electronic spectral and magnetic studies. TGA studies of some of the representative complexes were also done. Some of the representative complexes were also screened for the anti microbial studies.

  5. A Novel Molecular Fluorescent Technique for Imaging the Somatostatin Receptor 2, Using a DOTATOC Lanthanide Conjugate

    DEFF Research Database (Denmark)

    Andersen, Rune Wiik; Prakash, Vineet; Stensballe, Allan

    for synaptophysin.                         RESULTS            It is feasible to usefully chelate Samarium and Europium to DOTATOC. There is a distinct higher fluorescent signal arising from the chelation of the two ions than by the DOTA functional group alone. The unparaffinated pancreatic tumor tissues demonstrate.......                       CLINICAL RELEVANCE/APPLICATION            We propose a method for the histopatholgical receptor verification using fluorescent DOTATOC imaging. This potentially permits  ex-vivo developmental platforms for DOTA-conjugated molecules.        ...

  6. Chemi-ionization for Enhanced Plasma Densities

    Science.gov (United States)

    Ard, S.

    2016-12-01

    The Air Force has long considered ways of creating enhanced plasma density as a method of mitigating the detrimental effects of ionospheric density irregularities. Numerous easily photo-ionizable molecules have been released for study in this regard, yet this approach is inherently limited to daytime use. Recently attention has turned towards chemi-ionization. Several lanthanide metal oxides have bond strengths greater than their IP, such that M + O → MO+ + e- becomes energetically accessible. In 2013 the Metal Oxide Space Cloud (MOSC) mission released vaporized samarium in the lower ionosphere to study its potential as a chemi-ionization agent with atomic oxygen. While successful at producing enhanced densities, several results created questions about the underlying chemistry. This talk will focus on our lab's efforts supporting these releases, both in analysis of the principal thermochemistry and its effects on assessment of previous results, as well as ongoing experiments considering the potential of other chemi-ionization systems for future experiments.

  7. Multifunctional microsphere formulation of fluorescent magnetic properties for drug delivery system

    Science.gov (United States)

    Kusrini, Eny; Prassanti, Riesna; Nurjaya, Dwi Marta; Gunawan, Cindy

    2017-02-01

    The microsphere formulations of Chit/TPP/Sm/Fe3O4/Rn were prepared by an ionic gelation technique, where Chit=chitosan, TPP=tripolyphosphate, Sm=samarium and Rn=ranitidine. Optimum of microsphere formulation exhibit magnetic and fluorescent properties with adsorption efficiency of ˜92% was obtained for Chit/TPP/Sm/Fe3O4/Rn with ratio 400:500:50:1:20. Fluorescence intensity of microsphere formulations increased with the cumulative amount release of ranitidine, so that the changing of fluorescence intensity at wavelength of 590 nm referring to the Sm3+ ion could be used as indicator in DDS. With the demonstration of sustained release from microsphere formulation, it allows to investigate the applications to other drugs.

  8. Carbohydrate-auxiliary assisted preparation of enantiopure 1,2-oxazine derivatives and aminopolyols

    Directory of Open Access Journals (Sweden)

    Marcin Jasiński

    2012-04-01

    Full Text Available An approach to enantiopure hydroxylated 2H-1,2-oxazine derivatives is presented utilizing the [3 + 3] cyclisation of lithiated alkoxyallenes and an L-erythrose-derived N-glycosyl nitrone as precursors. This key step proceeded only with moderate diastereoselectivity, but allowed entry into both enantiomeric series of the resulting 3,6-dihydro-2H-1,2-oxazines. Their enol ether double bond was then subjected to a hydroboration followed by an oxidative work-up, and finally the auxiliary was removed. The described three-step procedure enabled the synthesis of enantiopure hydroxylated 1,2-oxazines. Typical examples were treated with samarium diiodide leading to enantiopure acyclic aminopolyols. We also report on our attempts to convert these compounds into enantiopure hydroxylated pyrrolidine derivatives.

  9. Solvothermal synthesis and spectroscopic characterization of three lanthanide complexes with high luminescent properties [H2NMe2]3[Ln(III)(2,6-pyridinedicarboxylate)3] (Ln = Sm, Eu, Tb): In the presence of 4,4‧-Bipyridyl

    Science.gov (United States)

    Viveros-Andrade, Alan G.; Colorado-Peralta, Raúl; Flores-Alamo, Marcos; Castillo-Blum, Silvia E.; Durán-Hernández, Jesús; Rivera, José María

    2017-10-01

    Three lanthanide complexes, [H2NMe2]3[Ln(III)(2,6-pyridinedicarboxylate)3] (Ln = Sm, Eu, Tb) have been successfully synthesized using a solvothermal method in the presence of a base and they were prepared from inexpensive and readily available reactants. Infrared, ultraviolet-visible absorption spectroscopies, elemental analyses and thermogravimetric analysis were employed for the characterization. Crystals suitable for X-ray diffraction were isolated in good yields by a simple filtration, their crystal structures were analyzed; the samarium structure has orthorhombic symmetry with space group Pbcn, exhibiting three-dimensional supramolecular architecture through hydrogen bonding interactions. The metal center is coordinated to nine atoms corresponding to three pyridine-2,6-dicarboxylic acid molecules. These compounds are thermally stable up to 270 °C.

  10. Second Harmonic Generation Using an All-Fiber Q-Switched Yb-Doped Fiber Laser and MgO:c-PPLN

    Directory of Open Access Journals (Sweden)

    Yi Gan

    2008-01-01

    Full Text Available We have experimentally demonstrated an efficient all-fiber passively Q-switched Yb-doped fiber laser with Samarium doped fiber as a saturable absorber. Average output power of 3.4 W at a repetition rate of 250 kHz and a pulse width of 1.1 microseconds was obtained at a pump power of 9.0 W. By using this fiber laser system and an MgO-doped congruent periodically poled lithium niobate (MgO:c-PPLN, second harmonic generation (SHG output at 532 nm was achieved at room temperature. The conversion efficiency is around 4.2% which agrees well with the theoretical simulation.

  11. Preliminary Study In Preparation Of Nd3+: YAG And Sm3+: Y2O3 Transparent Ceramics

    Science.gov (United States)

    Voicu, F.; Gheorghe, C.; Florica, C.

    2012-12-01

    In the present work we present preliminary research on producing of transparent polycrystalline ceramics. Samarium doped Yttrium oxide (1%, 3% and 5%) and Neodymium (1%) doped YAG (Y3Al5O12) translucent ceramics were fabricated by solid-state reaction. Commercial nanopowders was used as the starting materials: Sm2O3 (6μm) and Y2O2 (20-50 nm) for Sm3+: Y2O3 and α-Al2O3, Y2O3 and Nd2O3 (20-50 nm) for Nd3+: YAG. For the preparation of Nd3+: YAG, 0.5 wt% tetraethyl orthosilicate (TEOS) was use as sintering additive, and 1 wt % PEG (polyethylene glycol-400) as dispersant.

  12. Electric Field-Assisted Pressureless Sintering of Ceramic Protonic Conductors

    DEFF Research Database (Denmark)

    Muccillo, R.; Esposito, Vincenzo; Zanetti De Florio, Daniel

    2017-01-01

    -5 A the electric current pulse amplitude. The sintering experiments were carried out in ambient atmosphere with the pellets positioned inside a vertical dilatometer furnace with Pt-Ir electrodes connected either to a power supply for applying the electric field or to an impedance analyzer for collecting [-Z''(ω) x......Gadolinium, yttrium and samarium-doped barium cerate (BCGd, BCY and BCSm, respectively) polycrystalline green pellets were submitted to electric field-assisted pressureless sintering experiments isothermally in the temperature range 800-1200oC under 100-200 V cm-1 electric fields, limiting to 1...... of the electrical conductivity of flash sintered specimens. Joule heating is assumed to be the primary effect of the electric current pulse through the specimens. Improved grain-to-grain contact and the removal of depleted chemical species due to Joule heating at the space charge region are proposed, respectively...

  13. Radioluminescence of rare-earth doped aluminum oxide

    Energy Technology Data Exchange (ETDEWEB)

    Santiago, M.; Molina, P. [Universidad Nacional del Centro de la Provincia de Buenos Aires, Instituto de Fisica Arroyo Seco, Pinto 399, 7000 Tandil (Argentina); Barros, V. S.; Khoury, H. J.; Elihimas, D. R., E-mail: msantiag@exa.unicen.edu.ar [Universidade Federal de Pernambuco, Departamento de Energia Nuclear, Av. Prof. Luiz Freire 1000, Recife, PE 50740-540 (Brazil)

    2011-10-15

    Carbon-doped aluminum oxide (Al{sub 2}O{sub 3}:C) is one of the most used radioluminescence (Rl) materials for fiberoptic dosimetry due to its high efficiency and commercial availability. However, this compound presents the drawback of emitting in the spectral region, where the spurious radioluminescence of fibers is also important. In this work, the radioluminescence response of rare-earth doped Al{sub 2}O{sub 3} samples has been evaluated. The samples were prepared by mixing stoichiometric amounts of aluminum nitrate, urea and dopants with different amounts of terbium, samarium, cerium and thulium nitrates varying from 0 to 0.15 mo 1%. The influence of the different activators on the Rl spectra has been investigated in order to determine the feasibility of using these compounds for Rl fiberoptic dosimetry. (Author)

  14. Synthesis and structure activity relationship studies of 3-biaryl-8-oxa-bicyclo[3.2.1]octane-2-carboxylic acid methyl esters

    Science.gov (United States)

    Torun, Lokman; Madras, Bertha K.; Meltzer, Peter C.

    2012-01-01

    Stille cross coupling protocols were utilized for the synthesis of 3-(biaryl)-8-oxabicyclo[3.2.1]oct-2-ene-2-carboxylic acid methyl esters, which furnished products in high yields where in some cases Suzuki coupling under the conditions utilized provided complex reaction mixture. Samarium iodide reduction of the resulting coupling products produced both of the 2β-carbomethoxy-3-biaryl-8-oxabicyclo[3.2.1]octane diastereomers and the 2α-carbomethoxy-3-biaryl-8-oxabicyclo[3.2.1]octane diastereomers. Among the series synthesized, the benzothiophene substituted compounds demonstrated significant binding profiles of inhibition of WIN 35,438 with 177 fold selectivity for DAT vs. SERT. PMID:22398259

  15. Synthesis and structure-activity relationship studies of 3-biaryl-8-oxabicyclo[3.2.1]octane-2-carboxylic acid methyl esters.

    Science.gov (United States)

    Torun, Lokman; Madras, Bertha K; Meltzer, Peter C

    2012-04-15

    Stille cross coupling protocols were utilized for the synthesis of 3-(biaryl)-8-oxabicyclo[3.2.1]oct-2-ene-2-carboxylic acid methyl esters, which furnished products in high yields where in some cases Suzuki coupling under the conditions utilized provided complex reaction mixture. Samarium iodide reduction of the resulting coupling products produced both of the 2β-carbomethoxy-3-biaryl-8-oxabicyclo[3.2.1]octane diastereomers and the 2α-carbomethoxy-3-biaryl-8-oxabicyclo[3.2.1]octane diastereomers. Among the series synthesized, the benzothiophene substituted compounds demonstrated significant binding profiles of inhibition of WIN 35,438 with 177-fold selectivity for DAT versus SERT. Copyright © 2012 Elsevier Ltd. All rights reserved.

  16. Recoverable immobilization of transuranic elements in sulfate ash

    Science.gov (United States)

    Greenhalgh, Wilbur O.

    1985-01-01

    Disclosed is a method of reversibly immobilizing sulfate ash at least about 20% of which is sulfates of transuranic elements. The ash is mixed with a metal which can be aluminum, cerium, samarium, europium, or a mixture thereof, in amounts sufficient to form an alloy with the transuranic elements, plus an additional amount to reduce the transuranic element sulfates to elemental form. Also added to the ash is a fluxing agent in an amount sufficient to lower the percentage of the transuranic element sulfates to about 1% to about 10%. The mixture of the ash, metal, and fluxing agent is heated to a temperature sufficient to melt the fluxing agent and the metal. The mixture is then cooled and the alloy is separated from the remainder of the mixture.

  17. Design consideration for magnetically suspended flywheel systems

    Science.gov (United States)

    Anand, D.; Kirk, J. A.; Frommer, D. A.

    1985-01-01

    Consideration is given to the design, fabrication, and testing of a magnetically suspended flywheel system for energy storage applications in space. The device is the prototype of a system combining passive suspension of the flywheel plate by samarium cobalt magnets and active control in the radial direction using eight separate magnetic coils. The bearing assembly was machined from a nickel-iron alloy, and the machine parts are all hydrogen annealed. Slots in the magnetic plate allow four independent quadrants for control. The motor/generator component of the system is a brushless dc-permanent magnetic/ironless engine using electronic communication. The system has been tested at over 2500 rpm with satisfactory results. The system characteristics of the flywheel for application in low earth orbit (LEO) are given in a table.

  18. Modifications of interface chemistry of LSM–YSZ composite by ceria nanoparticles

    DEFF Research Database (Denmark)

    Knöfel, Christina; Wang, Hsiang-Jen; Thydén, Karl Tor Sune

    2011-01-01

    A porous composite electrode LSM–YSZ (lanthanum strontium manganite and yttria stabilized zirconia) was impregnated with different amounts of SDC (samarium substituted ceria) nanoparticles. The materials were investigated with X-ray diffraction, scanning electron microscopy, transmission electron...... crystal structure. Low concentrations of lanthanum and manganese originating from LSM were detected within SDC particles. It was also observed that the relative atomic concentration of strontium increased on the LSM–YSZ surface with increasing amount of SDC nanoparticles. These findings are related...... to the applied nanoparticle impregnation method. It is indicated that interactions between surfactant, nanoparticles, impregnation solution and the LSM–YSZ composite take place which can locally affect the surface and interface chemistry of the investigated materials....

  19. Lanthanide Ionization Energies and the Sub-Shell Break. Part 1. The Second Ionization Energies

    Science.gov (United States)

    Johnson, David A.; Nelson, Peter G.

    2017-03-01

    By interpolating a 4fq6s → 4fq7s transition within the sequence f1 → f14 rather than between f0 and f14, revised second ionization energies of the lanthanides have been obtained. In the early part of the series, between cerium and samarium, the revisions are significantly higher than currently accepted values. The revised values have been used to calculate the energy variation for the conversion of Ln(g, 4fq6s2) to Ln2+(g, 4fq) across the series Ba → Yb. The variation is smooth between lanthanum and ytterbium but the barium point at q = 0 is displaced downwards by more than 0.3 eV, thereby representing a significant sub-shell break. A case is also made for a substantial change to the second ionization energy of lutetium, the revised value being 14.13 ± 0.10 eV.

  20. Assessing the Reliability of Quantitative Imaging of Sm-153

    Science.gov (United States)

    Poh, Zijie; Dagan, Maáyan; Veldman, Jeanette; Trees, Brad

    2013-03-01

    Samarium-153 is used for palliation of and recently has been investigated for therapy for bone metastases. Patient specific dosing of Sm-153 is based on quantitative single-photon emission computed tomography (SPECT) and knowing the accuracy and precision of image-based estimates of the in vivo activity distribution. Physical phantom studies are useful for estimating these in simple objects, but do not model realistic activity distributions. We are using realistic Monte Carlo simulations combined with a realistic digital phantom modeling human anatomy to assess the accuracy and precision of Sm-153 SPECT. Preliminary data indicates that we can simulate projection images and reconstruct them with compensation for various physical image degrading factors, such as attenuation and scatter in the body as well as non-idealities in the imaging system, to provide realistic SPECT images.

  1. Trial of obtaining a high-grade gadolinium concentrate using the fractional precipitation together with the ion exchange

    Energy Technology Data Exchange (ETDEWEB)

    Ozga, W.; Soltysiak, I. (Uniwersytet Marii Curie-Sklodowskiej, Lublin (Poland))

    1980-01-01

    The modified fractional precipitation of lanthanon-potassium double chromate was used for preliminary separation of gadolinium concentrate containing 60% Gd/sub 2/O/sub 3/, 33.3% Sm/sub 2/O/sub 3/. The 1st fraction enriched with samarium (60% Sm/sub 2/O/sub 3/) and 2nd fraction enriched with gadolinium (80% Gd/sub 2/O/sub 3/ with efficiency of 82% recounting on Gd/sub 2/O/sub 3/) were obtained. Both fractions were separated by the elution with EDTA solution buffered with ammonium acetate. The good results were obtained by ion exchange separation only of the 1st fraction.

  2. Metabolic radiotherapy: which place in 2001?; Radiotherapie metabolique: quel role en 2001?

    Energy Technology Data Exchange (ETDEWEB)

    Georges, B.; Douard, M.C. [Hopital Saint-Louis, Unite Douleur, Dept. d' Anesthesie-Reanimation, 75 - Paris (France); Rain, J.D. [Hopital Saint-Louis, Service de Medecine Nucleaire, 75 - Paris (France)

    2002-05-01

    Metabolic radiotherapy is a new therapy for management of bone pain in patients with bone metastatic prostate carcinoma. Strontium-89 and Samarium-153 concentrate in bone metastases and radiate them. A pain decrease is obtained in 60-70% of cases. Side effects are a significant hematological depression without great clinical consequences if good therapeutic indications are respected. Our multidisciplinary experience of these radionuclides in 54 performed treatments shows a rate of good responders of 66 % with a rate of excellent results (total decrease of pain) in 47%. The therapeutic effectiveness is correlated with pain intensity measured by Visual Analogic Scale (VAS) and equivalent dose of morphine. Radionuclide therapy should be applied to patients as early as possible alter establishment of bone metastases. (author)

  3. Interpretation of Ferroan Anorthosite Ages and Implications for the Lunar Magma Ocean

    Science.gov (United States)

    Neal, C. R.; Draper, D. S.

    2017-01-01

    Ferroan Anorthosites (FANs) are considered to have purportedly crystallized directly from the lunar magma ocean (LMO) as a flotation crust. LMO modeling suggests that such anorthosites started to form only after greater than 70 percent of the LMO had crystallized. Recent age dates for FANs have questioned this hypothesis as they span too large of an age range. This means a younger age for the Moon-forming giant impact or the LMO hypothesis is flawed. However, FANs are notoriously difficult to age-date using the isochron method. We have proposed a mechanism for testing the LMO hypothesis through using plagioclase trace element abundances to calculate equilibrium liquids and compare them with LMO crystallization models. We now examine the petrography of the samples that have Sm-Nd (Samarium-Neodymium) age dates (Rb-Sr (Rubidium-Strontium) isotopic systematics may have been disturbed) and propose a relative way to age date FANs.

  4. Spectroscopic identification of rare earth elements in phosphate glass

    Science.gov (United States)

    Devangad, Praveen; Tamboli, Maktum; Muhammed Shameem, K. M.; Nayak, Rajesh; Patil, Ajeetkumar; Unnikrishnan, V. K.; Santhosh, C.; Kumar, G. A.

    2018-01-01

    In this work, rare earth-doped phosphate glasses were synthesized and characterized using three different spectroscopic techniques. The absorption spectra of the prepared praseodymium (Pr) and samarium (Sm) doped glasses, recorded by a UV–VIS-NIR spectrophotometer, show the characteristic absorption bands of these elements. To confirm this inference, laser-induced fluorescence spectra of Pr and Sm were obtained at a laser excitation of 442 nm. Their emission bands are reported here. The elemental analysis of these samples was carried out using a laser-induced breakdown spectroscopy (LIBS) system. Characteristic emission lines of Pr and Sm have been identified and reported by the recorded LIBS spectra of glass samples. Results prove that using these three complimentary spectroscopic techniques (absorption, fluorescence and LIBS), we can meaningfully characterize rare earth-doped glass samples.

  5. Electronic properties of organic/metal interfaces

    CERN Document Server

    Koch, N

    2000-01-01

    Conjugated organic materials are the promising class of materials for the application in new electronic and opto-electronic devices. The successful realization of highly efficient organic light emitting devices with oligomers and polymers as active electroluminescent layers has lead to a large number of investigations on such systems, the key point being to find means of increasing efficiency and performance of the devices. Intrinsically present in light emitting devices are interfaces, and it appears that the structural and electronic properties of those are of uttermost importance for the device quality. In the present work, ultraviolet and X-ray photoelectron spectroscopy, plus related surface sensitive experimental methods, were used to investigate the electronic properties of interfaces between conjugated organic materials (based on para-phenylene) and various metals. The observed interactions between the two different kinds of materials ranged from physisorption (aluminum and samarium), to the formation...

  6. Structural studies of type N superconductive compounds: R{sub 2-x}Ce{sub x}CuO{sub 4{+-}{delta}} (R = Gd, Eu, Sm, Nd, Pr); influences of chemical treatments on physical properties; Etudes structurales des composes supraconducteurs de type N: R{sub 2-x}Ce{sub x}CuO{sub 4{+-}{delta}} (R = Gd, Eu, Sm, Nd, Pr); influences des traitements chimiques sur les proprietes physiques

    Energy Technology Data Exchange (ETDEWEB)

    Vigoureux, P.

    1995-06-01

    Different chemical treatments of R{sub 2-x}Ce{sub x}CuO{sub 4{+-}{delta}} compounds monocrystals (gadolinium, europium, samarium, neodymium and praseodymium cuprates) modify their physical properties especially their superconductive properties. The presented chemical treatments are: the substitution of the trivalent rare earth element R by an other trivalent lanthanide, its substitution by tetravalent cerium, and heat treatment under low oxygen pressure. After these chemical treatments, structural modifications are observed by neutrons and X-rays diffraction, and allow to precise their actions: size effect of the rare earth element on the deformation of the CuO{sub 2} planes, links between deformation and superconductivity and magnetic properties. (A.B.). 394 refs/.

  7. [Principles, modalities and indications of the administration of Radium in cancers, focus on metastatic prostate cancer: State of arts].

    Science.gov (United States)

    Bertolaso, Pauline; Leroy, Laura; Gross-Goupil, Marine; Aupee, Olivier; Ravaud, Alain; Roubaud, Guilhem; Cazeau, Anne-Laure; Le Moulec, Sylvestre

    2017-09-01

    Prostate cancer is the first cancer in men and has a specific tropism to bones. This tropism provided the rationale to develop bone targeting radiopharmaceutical agents, such as strontium, samarium and more recently the Radium-223, an alpha-emitter. In a phase III trial, ALSYMPCA, Radium-223 not only improved pain relief, but also impacted on overall survival. Despite an approval by both FDA and EMA, prescription of this agent remains limited by the lack of refund, especially in France. Radium-223 is currently evaluated in several clinical trials (combination with chemotherapy, radiotherapy or hormone therapy) in order to optimize the therapeutic sequences in metastatic bone prostate cancer and argues for being incorporated into the current therapeutic arsenal. Copyright © 2017 Société Française du Cancer. Published by Elsevier Masson SAS. All rights reserved.

  8. Radium-223 dichloride in clinical practice: a review.

    Science.gov (United States)

    Florimonte, Luigia; Dellavedova, Luca; Maffioli, Lorenzo Stefano

    2016-09-01

    The onset of skeletal metastases is typical of advanced-stage prostate cancer and requires a multidisciplinary approach to alleviate bone pain and try to delay disease progression. The current therapeutic armamentarium includes conventional analgesics, chemotherapeutic agents, immunotherapy, androgen-deprivation therapy, osteoclast inhibitors (bisphosphonates, denosumab), surgical interventions, external-beam radiotherapy and radionuclide metabolic therapy. Many studies in recent decades have demonstrated the efficacy of various radiopharmaceuticals, including strontium-89 and samarium-153, for palliation of pain from diffuse skeletal metastases, but no significant benefit in terms of disease progression and overall survival has been shown. The therapeutic landscape of metastatic skeletal cancer significantly changed after the introduction of radium-223, the first bone-homing radiopharmaceutical with disease-modifying properties. In this paper we extensively review the literature on the use of radium-223 dichloride in metastatic castration-resistant prostate cancer.

  9. Charge Propagation Dynamics in Temperature Quenching of Sm-Doped TiO2: Impedance Spectroscopy of Release Processes of Trapped Charges Determining Luminescence Intensity

    Science.gov (United States)

    Ishii, Masashi; Towlson, Brian; Harako, Susumu; Zhao, Xin-wei; Komuro, Shuji; Hamilton, Bruce

    2013-02-01

    The mechanism of the temperature quenching of luminescence in samarium-doped titanium dioxide (TiO2:Sm) was investigated with electrical measurement techniques. Because electrical measurements are sensitive to charge dynamics, the indirect excitation processes of the Sm dopants, i.e., trapping and recombination of injected charges into the host TiO2, can be clarified. Complex impedance spectroscopy between 100 and 300 K revealed a correlation between the temperature quenching of TiO2:Sm and the trapping and recombination processes. Analyses using equivalent circuits revealed that the main factor determining the temperature quenching properties was delocalization of the trapped charges and decoupling of free charges in TiO2 from trapped charges. The delocalization and decoupling parameters were evaluated from the equivalent circuit constants, and a numerical model incorporating the determined values reproduced the experimentally observed temperature quenching of photoluminescence.

  10. A facile green synthesis of Sm2O3 nanoparticles via microwave-assisted urea precipitation route and their optical properties

    Science.gov (United States)

    Xue, Hansong; Zhang, Weina; Li, Xinyu; You, Xiaochang; Rao, Jinsong; Pan, FuSheng

    2017-05-01

    Samarium oxide (Sm2O3) nanoparticles with a narrow size distribution were successfully synthesized by microwave-assisted using urea as precipitant without surfactant or template. The Sm2O3 particles were characterized using X-ray diffraction analysis, field-emission scanning electron microscopy, field-emission transmission electron microscopy and ultraviolet-visible-near-infrared spectrophotometer. The results showed that the samples prepared with different concentration of urea had different particle sizes. When the concentration of urea was 1.2 mol/L, the sample had the smallest particle size. A possible mechanism for the formation of the nanoparticles was proposed. Optical properties of Sm2O3 nanoparticles showed that the nanoparticles had a strong absorption property in the deep ultraviolet region between 200 nm and 270 nm. [Figure not available: see fulltext.

  11. Cross sections of deuteron induced reactions on $^{nat}$Sm for production of the therapeutic radionuclide $^{145}$Sm and $^{153}$Sm

    CERN Document Server

    Tárkányi, F; Takács, S; Ditrói, F; Csikai, J; Ignatyuk, A V

    2014-01-01

    At present, targeted radiotherapy (TR) is acknowledged to have great potential in oncology. A large list of interesting radionuclides is identified, including several radioisotopes of lanthanides, amongst them $^{145}$Sm and $^{153}$Sm. In this work the possibility of their production at a cyclotron was investigated using a deuteron beam and a samarium target. The excitation functions of the $^{nat}$Sm(d,x)$^{145153}$Sm reactions were determined for deuteron energies up to 50 MeV using the stacked-foil technique and high-resolution $\\gamma$-ray spectrometry. The measured cross sections and the contributing reactions were analyzed by comparison with results of the ALICE, EMPIRE and TALYS nuclear reaction codes. A short overview and comparison of possible production routes is given.

  12. Cross sections of deuteron induced reactions on (nat)Sm for production of the therapeutic radionuclide ¹⁴⁵Sm and ¹⁵³Sm.

    Science.gov (United States)

    Tárkányi, F; Hermanne, A; Takács, S; Ditrói, F; Csikai, J; Ignatyuk, A V

    2014-09-01

    At present, targeted radiotherapy (TR) is acknowledged to have great potential in oncology. A large list of interesting radionuclides is identified, including several radioisotopes of lanthanides, amongst them (145)Sm and (153)Sm. In this work the possibility of their production at a cyclotron was investigated using a deuteron beam and a samarium target. The excitation functions of the (nat)Sm(d,x)(145,153)Sm reactions were determined for deuteron energies up to 50 MeV using the stacked-foil technique and high-resolution γ-ray spectrometry. The measured cross sections and the contributing reactions were analyzed by comparison with results of the ALICE, EMPIRE and TALYS nuclear reaction codes. A short overview and comparison of possible production routes is given. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Post-assembly magnetization of a 100 kW high speed permanent magnet rotor.

    Science.gov (United States)

    Lv, Yiliang; Wang, Guobin; Li, Liang

    2015-03-01

    A post-assembly magnetizing fixture has been designed and successfully used to magnetize the rotor of a 100 kW high speed permanent magnet synchronous motor. The rotor is a solid cylinder with outer diameter of 80 mm and total length of 515 mm. The permanent magnet material is samarium-cobalt (Sm2Co17) with saturation magnetizing field of 6 T. The mechanical stability of the magnetizing fixture has been studied as well as the general design methodology. The magnetizing coil is subdivided in order to reduce the electromagnetic force, and the coils are separately reinforced in different ways. The electromagnetic and structural optimization is performed by finite element analysis and verified by experiments.

  14. Dynamic modeling of brushless dc motor-power conditioner unit for electromechanical actuator application

    Science.gov (United States)

    Demerdash, N. A.; Nehl, T. W.

    1979-01-01

    A comprehensive digital model for the analysis of the dynamic-instantaneous performance of a power conditioner fed samarium-cobalt permanent magnet brushless DC motor is presented. The particular power conditioner-machine system at hand, for which this model was developed, is a component of an actual prototype electromechanical actuator built for NASA-JSC as a possible alternative to hydraulic actuators as part of feasibility studies for the shuttle orbiter applications. Excellent correlation between digital simulated and experimentally obtained performance data was achieved for this specific prototype. This is reported on in this paper. Details of one component of the model, its applications and the corresponding results are given in this paper.

  15. Thermodynamic Investigation of the Reduction-Distillation Process for Rare Earth Metals Production

    Science.gov (United States)

    Judge, W. D.; Azimi, G.

    2017-10-01

    Owing to their high vapor pressure, the four rare earth metals samarium, europium, thulium, and ytterbium are produced by reduction-distillation whereby their oxides are reduced with metallic lanthanum in vacuo, and the produced metal is subsequently vaporized off. Here, we performed a thorough thermodynamic investigation to establish a fundamental understanding of the reduction-distillation process. Thermodynamic functions including vapor pressures, Gibbs free energies, and enthalpies of reaction were calculated and compared with available experimental data. Furthermore, the kinetics of the process was explored and theoretical evaporation rates were calculated from thermodynamic data. The thermodynamic model developed in this work can help optimize processing conditions to maximize the yield and improve the overall process.

  16. The effect of diluents on the extraction of Sm(III using N,N,N’,N’-tetrabutylmalonamide

    Directory of Open Access Journals (Sweden)

    SUN SI-XIU

    2004-09-01

    Full Text Available A study has been made of the extraction of samarium(III from nitrate solutions using N,N,N’,N’-tetrabutylmalonamide (TBMA in a series of diluents. The dependence of the extraction distribution on the concentrations of aqueous nitric acid, lithium nitrate and organic TBMA was investigated. The experimental results showed that the extraction efficiency of TMBA in different diluents for Sm(III increases in the order: chloroform, carbon tetrachloride, benzene, xylene, toluene, cyclohexane, n-hexane, n-octane. The stoichiometry of the extracted species conform to Sm(NO33.3TBMA in all the employed diluents. The interaction between extractant or extracted species and diluent is discussed and a quantitative expression relating the extraction constant and the parameters of the diluent has been established.

  17. Reaction pathways of oxide-reduction-diffusion (ORD) synthesis of SmCo5 and in situ study of its hydrogen induced amorphization (HIA)

    Science.gov (United States)

    Belener, Kevin L. A.; Kohlmann, Holger

    2014-12-01

    A modified oxide-reduction-diffusion (ORD) method for the synthesis of single-phase SmCo5 is described. Samarium oxide, cobalt and calcium (20% excess) are heated in sealed niobium tubes following an optimized temperature programme. The reaction proceeds via Ca1-xSmxO as an intermediate and yields SmCo5, and CaO, which may be washed off with dilute acetic acid. Single-phase SmCo5 prepared by this route shows an enhanced reactivity towards hydrogen and reacts already at moderate conditions of p(H2)=0.1 MPa and TX-ray powder diffraction suggest the formation of ternary hydrides SmCo5Hx at temperatures around 473 and 573 K, and disproportionation into cobalt of poor crystallinity and probably an amorphous binary samarium hydride at 700 K, i.e. a hydrogen induced amorphization (HIA) of SmCo5. Neutron powder diffraction was carried out on a 154SmCo5 sample with the high-intensity neutron powder diffractometer D20 at the Institute Laue-Langevin, Grenoble, France. The CaCu5 type crystal structure was confirmed (space group P6/mmm, a=500.60 (2) pm, c=397.01 (2) pm at T=298 (1) K) and the magnetic moments along the crystallographic c axis, μ||c, were refined to be 0.15 (6), 2.02 (6) and 1.75 (5) μB for Sm, Co1 and Co2 atoms, respectively, in ferromagnetic SmCo5. The HIA process was confirmed by in situ neutron powder diffraction at higher pressures of 8.1 MPa deuterium gas.

  18. Radium-223 chloride: a potential new treatment for castration-resistant prostate cancer patients with metastatic bone disease

    Directory of Open Access Journals (Sweden)

    Harrison MR

    2013-01-01

    Full Text Available Michael R Harrison, Terence Z Wong, Andrew J Armstrong, Daniel J GeorgeDuke Cancer Institute, Durham, NC, USABackground: Radium-223 chloride (223Ra; Alpharadin is an alpha-emitting radioisotope that targets areas of osteoblastic metastasis and is excreted by the small intestine. When compared with beta-emitters (eg, strontium-89, samarium-153, 223Ra delivers a high quantity of energy per track length with short tissue penetration.Objective: This review describes the mechanism, radiobiology, and preclinical development of 223Ra and discusses the clinical data currently available regarding its safety and efficacy profile.Methods: Data from clinical trials including abstracts were collected and reviewed using the PubMed Database, as well as the American Society of Clinical Oncology abstract database.Conclusion: Current bone-targeted therapies fall into two main categories: antiresorptive agents (eg, zoledronic acid, denosumab, which have been shown to delay skeletal-related events, and radiopharmaceuticals (eg, samarium-153, which may have a role in pain palliation. Historically, neither antiresorptive agents nor radiopharmaceuticals have shown definitive evidence of improved overall survival or other antitumor effects in metastatic castrate-resistant prostate cancer (mCRPC. Radiopharmaceuticals are limited by myelosuppresion, thrombocytopenia, and renal excretion. In a recently reported randomized Phase III trial in men with symptomatic bone-metastatic CRPC who had received or were ineligible for docetaxel chemotherapy, 223Ra treatment resulted in improved overall survival and delayed skeletal-related events. Toxicity consisted of minor gastrointestinal side effects and mild neutropenia and thrombocytopenia that were rarely severe. Pending regulatory approval, 223Ra may represent a unique and distinct option for an important subgroup of patients with mCRPC; future trials should address its use in combination or in sequence with existing and novel

  19. Origin of Blue-Green Emission in α-Zn2P2O7and Local Structure of Ln3+Ion in α-Zn2P2O7:Ln3+(Ln = Sm, Eu): Time-Resolved Photoluminescence, EXAFS, and DFT Measurements.

    Science.gov (United States)

    Gupta, Santosh Kumar; Ghosh, Partha Sarathi; Yadav, Ashok Kumar; Jha, Shambhu Nath; Bhattacharyya, Dibyendu; Kadam, Ramakant Mahadeo

    2017-01-03

    Considering the fact that pyrophosphate-based hosts are in high demand for making highly efficient luminescence materials, we doped two visible lanthanide ions, viz. Sm 3+ and Eu 3+ , in Zn 2 P 2 O 7 . Interestingly, it was oberved that pure Zn 2 P 2 O 7 displayed blue-green dual emission on irradiation with ultraviolet light. Emission and lifetime spectroscopy shows the presence of defects in pyrophosphate samples which are responsible for such emission. DFT calculations clearly pinpointed that the electronic transitions between defect states located at just below the conduction band minimum (arises due to V O 1+ and V O 2+ defects) and valence band maximum, as well as impurity states situated in the band gap, can lead to dual emission in the blue-green region, as is also indicated by emission and lifetime spectra. X-ray absorption near edge spectroscopy (XANES) shows the stabilization of europium as well as samarium ion in the +3 oxidation state in α-Zn 2 P 2 O 7 . The fact that α-Zn 2 P 2 O 7 has two different coordination numbers for zinc ions, i.e. five- and six-coordinate, the study of dopant ion distribution in this particular matrix will be an important step in realizing a highly efficient europium- and samarium-based red-emitting phosphor. Time resolved photoluminescence (TRPL) shows that both of these ions are heterogeneously distributed between five- and six-coordinated Zn 2+ sites and it is the six-coordinated Zn 2+ site which is the most favorable for lanthanide ion doping. Extended X-ray absorption fine structure (EXAFS) measurements also suggested that a six-coordinated zinc ion is the preferred site occupied by trivalent lanthanide ions, which is in complete agreement with TRPL results. It was observed that there is almost complete transfer of photon energy from Zn 2 P 2 O 7 to Eu 3+ , whereas this transfer is inefficient and almost incomplete in case of Sm 3+ , which is indeed important information for the realization of pyrophosphate

  20. The effect of CTAB on synthesis in butanol of samaria and gadolinia doped ceria - nickel oxide ceramics; Efeito do CTAB na sintese solvotermica em butanol de ceramicas de ceria dopada com samaria e gadolinia - oxido de niquel

    Energy Technology Data Exchange (ETDEWEB)

    Arakaki, A.R.; Cunha, S.M.; Yoshito, W.K.; Ussui, V.; Lazar, D.R.R., E-mail: alexander@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CCTM/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Ciencia e Tecnologia de Materiais

    2011-07-01

    In this work it was synthesized doped ceria and Samaria gadolinia - nickel oxide ceramics, mainly applied as anodes Fuel Cells Solid Oxide. Powders of composition Ce{sub 0,8}(SmGd){sub 0,2}O{sub 1,9}/NiO and mass ratio of 40: 60% were initially synthesized by hydroxides coprecipitation and then treated solvo thermically in butanol. Cerium samarium, gadolinium and nickel chlorides and CTAB with molar ratio metal / CTAB ranging from 1 to 3, were used as raw materials Powders were treated in butanol at 150 deg C for 16h. The powders were analyzed by X-ray diffraction, scanning electron microscopy, specific surface area for adsorption of nitrogen and particle size distribution by laser beam scattering. The ceramics were analyzed by scanning electron microscopy and density measurements by immersion technique in water. The results showed that the powders had the characteristic crystalline structures of ceria and nickel hydroxide, and high specific surface area (80 m{sup 2} / g). The characterizations of ceramics demonstrated high chemical homogeneity and porosity values of 30%. (author)

  1. Effect of heavy atoms on the thermal stability of α-amylase from Aspergillus oryzae.

    Directory of Open Access Journals (Sweden)

    Michihiro Sugahara

    Full Text Available Currently, there are no versatile and established methods for improving stability of proteins. In an entirely different approach from conventional techniques such as mutagenesis, we attempted to enhance enzyme stability of α-amylase from Aspergillus oryzae using a heavy-atom derivatization technique. We evaluated changes in stability using differential scanning calorimetry (DSC. Candidate heavy atoms were identified using the Heavy-Atom Database System HATODAS, a Web-based tool designed to assist in heavy-atom derivatization of proteins for X-ray crystallography. The denaturation temperature of α-amylase derivatized with gadolinium (Gd or samarium (Sm ions increased by 6.2 or 5.7°C, respectively, compared to that of the native protein (60.6°C. The binding of six Gd ions was confirmed by X-ray crystallography of the enzyme at 1.5 Å resolution. DSC and dynamic light-scattering data revealed a correlation between stability and the aggregation state upon addition of Gd ions. These results show that HATODAS search is an effective tool for selecting heavy atoms for stabilization of this protein.

  2. Preparation of photoluminescent PMMA doped with tris(pyrazol-1-yl)borate lanthanide complexes

    Energy Technology Data Exchange (ETDEWEB)

    Bortoluzzi, Marco, E-mail: markos@unive.it [Dipartimento di Scienze Molecolari e Nanosistemi, Universita Ca' Foscari di Venezia, Dorsoduro 2137, 30123 Venezia (Italy); Paolucci, Gino, E-mail: paolucci@unive.it [Dipartimento di Scienze Molecolari e Nanosistemi, Universita Ca' Foscari di Venezia, Dorsoduro 2137, 30123 Venezia (Italy); Gatto, Mattia; Roppa, Stefania [Dipartimento di Scienze Molecolari e Nanosistemi, Universita Ca' Foscari di Venezia, Dorsoduro 2137, 30123 Venezia (Italy); Enrichi, Francesco [CIVEN, Coordinamento Interuniversitario Veneto per le Nanotecnologie, Via delle Industrie 5, 30175 Marghera (Venezia) (Italy); Ciorba, Serena; Richards, Bryce S. [School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh, EH14 4AS (United Kingdom)

    2012-09-15

    The neutral homoleptic Ln(III) complex Ln(Tp){sub 3} (Ln=Sm, Eu, Tb, Yb; Tp=hydrotris(pyrazol-1-yl)borate) were used as dopants for the preparation of novel photoluminescent poly(methyl methacrylate) glasses indicated as Ln(Tp){sub 3}-PMMA. The doped polymers containing samarium, europium and terbium derivatives showed emission associated to f-f transitions in the visible range upon excitation with UV light, while a NIR emission was obtained from Yb(Tp){sub 3}-PMMA. The maximum incident wavelength able to induce emissions from the Ln(Tp){sub 3}-doped polymers depends upon the choice of the lanthanide ion. No meaningful antenna-effect was instead observed using dysprosium as metal centre. - Highlights: Black-Right-Pointing-Pointer Polymers doped with photoluminescent lanthanide complexes. Black-Right-Pointing-Pointer Hydrotris(pyrazol-1-yl)borate (Tp) as antenna-ligand for Sm(III), Eu(III), Tb(III) and Yb(III). Black-Right-Pointing-Pointer Emission associated to f-f transitions upon excitation with UV light. Black-Right-Pointing-Pointer No antenna-effect for dysprosium derivative. Black-Right-Pointing-Pointer Photoluminescence excitation spectra are dependent upon the lanthanide ion.

  3. Uranium hydrogeochemical and stream sediment reconnaissance data release for the Elk City NTMS Quadrangle, Idaho/Montana, including concentrations of forty-five additional elements

    Energy Technology Data Exchange (ETDEWEB)

    Broxton, D.E.; Beyth, M.

    1980-07-01

    Totals of 1580 water and 1720 sediment samples were collected from 1754 locations in the quadrangle. Elemental concentration, field measurement, weather, geologic, and geographic data for each sample location are listed for waters in Appendix I-A and for sediments in Appendix I-B. Uranium/thorium ratios for sediment samples are also included in Appendix I-B. All elemental analyses were performed at the LASL. Water samples were initially analyzed for uranium by fluorometry. All water samples containing more than 40 parts per billion (ppB) uranium were reanalyzed by delayed-neutron counting (DNC). A supplemental report containing the multielement analyses of water samples will be open filed in the near future. Sediments were analyzed for uranium and thorium as well as aluminum, antimony, arsenic, barium, beryllium, bismuth, cadmium, calcium, cerium, cesium, chlorine, chromium, cobalt, copper, dysprosium, europium, gold, hafnium, iron, lanthanum, lead, lithium, lutetium, magnesium, manganese, nickel, niobium, potassium, rubidium, samarium, selenium, scandium, silver, sodium, strontium, tantalum, terbium, tin, titanium, tungsten, vanadium, ytterbium, zinc, and zirconium. Basic statistics for 40 of these elements are presented. All sediments were analyzed for uranium by delayed-neutron counting. Other elemental concentrations in sediments were determined by neutron-activation analysis for 30 elements, by x-ray fluorescence for 12 elements, and by arc-source emission spectrography for 2 elements. Analytical results for sediments are reported as parts per million.

  4. Temperature quenching in LAB based liquid scintillator

    Science.gov (United States)

    Sörensen, A.; Hans, S.; Junghans, A. R.; Krosigk, B. v.; Kögler, T.; Lozza, V.; Wagner, A.; Yeh, M.; Zuber, K.

    2018-01-01

    The effect of temperature changes on the light output of LAB based liquid scintillator is investigated in a range from -5 to 30°C with α -particles and electrons in a small scale setup. Two PMTs observe the scintillator liquid inside a cylindrically shaped aluminum cuvette that is heated or cooled and the temperature dependent PMT sensitivity is monitored and corrected. The α -emitting isotopes in dissolved radon gas and in natural Samarium (bound to a LAB solution) excite the liquid scintillator mixtures and changes in light output with temperature variation are observed by fitting light output spectra. Furthermore, also changes in light output by compton electrons, which are generated from external calibration γ -ray sources, is analysed with varying temperature. Assuming a linear behaviour, a combined negative temperature coefficient of {(-0.29 ± 0.01)}{ %/°}C is found. Considering hints for a particle type dependency, electrons show {(-0.17 ± 0.02)}{ %/°}C, whereas the temperature dependency seems stronger for α -particles, with {(-0.35 ± 0.03)}{ %/°}C. Due to a high sampling rate, a pulse shape analysis can be performed and shows an enhanced slow decay component at lower temperatures, pointing to reduced non-radiative triplet state de-excitations.

  5. Simultaneous detection of imidacloprid and parathion by the dual-labeled time-resolved fluoroimmunoassay.

    Science.gov (United States)

    Shi, Haiyan; Sheng, Enze; Feng, Lu; Zhou, Liangliang; Hua, Xiude; Wang, Minghua

    2015-10-01

    A highly sensitive direct dual-labeled time-resolved fluoroimmunoassay (TRFIA) to detect parathion and imidacloprid simultaneously in food and environmental matrices was developed. Europium (Eu(3+)) and samarium (Sm(3+)) were used as fluorescent labels by coupling separately with L1-Ab and A1P1-Ab. Under optimal assay conditions, the half-maximal inhibition concentration (IC50) and limit of detection (LOD, IC10) were 10.87 and 0.025 μg/L for parathion and 7.08 and 0.028 μg/L for imidacloprid, respectively. The cross-reactivities (CR) were negligible except for methyl-parathion (42.4 %) and imidaclothiz (103.4 %). The average recoveries of imidacloprid ranged from 78.9 to 104.2 % in water, soil, rice, tomato, and Chinese cabbage with a relative standard deviation (RSD) of 2.4 to 11.6 %, and those of parathion were from 81.5 to 110.9 % with the RSD of 3.2 to 10.5 %. The results of TRFIA for the authentic samples were validated by comparison with gas chromatography (GC) analyses, and satisfactory correlations (parathion: R (2) = 0.9918; imidacloprid: R (2) = 0.9908) were obtained. The results indicate that the dual-labeled TRFIA is convenient and reliable to detect parathion and imidacloprid simultaneously in food and environmental matrices.

  6. Interest of uranium complexes for the mechanism study of the McMurry reaction; Interet des complexes de l`uranium pour l`etude du mecanisme de la reaction de McMurry

    Energy Technology Data Exchange (ETDEWEB)

    Maury, O

    1997-07-04

    The reducing coupling reactions of ketones in diols and olefins are generally carried out with titanium or samarium compounds. In this work uranium complexes have been used. They have allowed to study the chemical reaction mechanism. This thesis is divided into three parts: 1) the reduction mechanism of uranium tetrachloride by cyclic voltametry has been studied at first. It has been shown that this reduction is followed by a transfer reaction of chlorides between the reduced specie of the higher electronic density and UCl . 2) In the second part is described: the synthesis, the crystal structure, the reactivity of the chemical agents, the stereochemistry of diols and alkenes formation and the pinacolisation reaction catalysis. 3) In the last part, the limits of the McMurry reaction are given by the study of the aromatic ketones pinacolisation reaction by-products. The obtained results show that the complexes of the metals which present a high reducing and oxo-philic (Ti, Sm, U..) character react in a similar way with the carbonyl compounds. If the uranium compounds are less used than those of the titanium in the field of the organic synthesis applications, they are precious auxiliaries and excellent models for reactions mechanisms study and for the synthesis methods optimization. (O.M.). 284 refs.

  7. Optical studies of Sm3+ ions doped Zinc Alumino Bismuth Borate glasses

    Science.gov (United States)

    Swapna, K.; Mahamuda, Sk.; Srinivasa Rao, A.; Shakya, S.; Sasikala, T.; Haranath, D.; Vijaya Prakash, G.

    Zinc Alumino Bismuth Borate (ZnAlBiB) glasses doped with different concentrations of samarium (Sm3+) ions were prepared by using melt quenching technique and characterized for their lasing potentialities in visible region by using the techniques such as optical absorption, emission and emission decay measurements. Radiative properties for various fluorescent levels of Sm3+ ions were estimated from absorption spectral information using Judd-Ofelt (JO) analysis. The emission spectra and con-focal photoluminescence images obtained by 410 nm laser excitation demonstrates very distinct and intense orange-red emission for all the doped glasses. The suitable concentration of Sm3+ ions in these glasses to act as an efficient lasing material has been discussed by measuring the emission cross-section and branching ratios for the emission transitions. The quantum efficiencies were also been estimated from emission decay measurements recorded for the 4G5/2 level of Sm3+ ions. From the measured emission cross-sections, branching ratios, strong photoluminescence features and CIE chromaticity coordinates, it was found that 1 mol% of Sm3+ ions doped ZnAlBiB glasses are most suitable for the development of visible orange-red lasers.

  8. Optical studies of Sm³⁺ ions doped zinc alumino bismuth borate glasses.

    Science.gov (United States)

    Swapna, K; Mahamuda, Sk; Srinivasa Rao, A; Shakya, S; Sasikala, T; Haranath, D; Vijaya Prakash, G

    2014-05-05

    Zinc Alumino Bismuth Borate (ZnAlBiB) glasses doped with different concentrations of samarium (Sm(3+)) ions were prepared by using melt quenching technique and characterized for their lasing potentialities in visible region by using the techniques such as optical absorption, emission and emission decay measurements. Radiative properties for various fluorescent levels of Sm(3+) ions were estimated from absorption spectral information using Judd-Ofelt (JO) analysis. The emission spectra and con-focal photoluminescence images obtained by 410 nm laser excitation demonstrates very distinct and intense orange-red emission for all the doped glasses. The suitable concentration of Sm(3+) ions in these glasses to act as an efficient lasing material has been discussed by measuring the emission cross-section and branching ratios for the emission transitions. The quantum efficiencies were also been estimated from emission decay measurements recorded for the (4)G5/2 level of Sm(3+) ions. From the measured emission cross-sections, branching ratios, strong photoluminescence features and CIE chromaticity coordinates, it was found that 1 mol% of Sm(3+) ions doped ZnAlBiB glasses are most suitable for the development of visible orange-red lasers. Copyright © 2014 Elsevier B.V. All rights reserved.

  9. Short-term clinico-radiological outcome of chronic knee synovitis among haemophilia A patients post phosphorus-32 radiosynoviorthesis.

    Science.gov (United States)

    Ty, Prasanna; Menon, Jagadish; Ar, Nataraj; Halanaik, Dhanapathi; Kramadhari, Harshith

    2017-01-01

    Various modes of therapy have been directed at breaking the vicious cycle at early stage of synovitis in haemophilia patients. This study was planned to assess the short-term clinico-radiological outcome of chronic knee synovitis among haemophilia A patients post phosphorus-32 (P-32) radiosynoviorthesis. P-32 samarium radiocolloid was injected into the knee and patients were followed up at 1 and 3 months, respectively. Clinical outcomes was assessed using Tegner Lysholm scores (TLSs), Modified Knee Society Clinical Rating System (MKSS) score and circumference of the knee joint. The radiological outcomes were assessed using X-ray, ultrasonography and bone scan. Among the fifteen haemophilia A patients studied, there was statistically significant difference in TLS ( χ(2)(2) = 27.887 and p value 32 bone scan showed marked decrease in uptake in the affected knee joint suggestive of radio ablation of synovial tissue. P-32 radiosynoviorthesis done for chronic synovitis among haemophilia A patients showed significant improvement in both clinical and radiological parameters. Ultrasonography can be utilized as non-invasive radiological modality for follow-up of P32 response for knee joint.

  10. Clinical use of bone-targeting radiopharmaceuticals with focus on alpha-emitters.

    Science.gov (United States)

    Wieder, Hinrich A; Lassmann, Michael; Allen-Auerbach, Martin S; Czernin, Johannes; Herrmann, Ken

    2014-07-28

    Various single or multi-modality therapeutic options are available to treat pain of bone metastasis in patients with prostate cancer. Different radionuclides that emit β-rays such as (153)Samarium and (89)Strontium and achieve palliation are commercially available. In contrast to β-emitters, (223)Radium as a α-emitter has a short path-length. The advantage of the α-emitter is thus a highly localized biological effect that is caused by radiation induced DNA double-strand breaks and subsequent cell killing and/or limited effectiveness of cellular repair mechanisms. Due to the limited range of the α-particles the bone surface to red bone marrow dose ratio is also lower for (223)Radium which is expressed in a lower myelotoxicity. The α emitter (223)Radium dichloride is the first radiopharmaceutical that significantly prolongs life in castrate resistant prostate cancer patients with wide-spread bone metastatic disease. In a phase III, randomized, double-blind, placebo-controlled study 921 patients with castration-resistant prostate cancer and bone metastases were randomly assigned. The analysis confirmed the (223)Radium survival benefit compared to the placebo (median, 14.9 mo vs 11.3 mo; P US Food and Drug Administration.

  11. Comparative study of Sm3+ doped in Li2O3-RE2O3-B2O3 (RE = Y/La glasses system for laser medium application

    Directory of Open Access Journals (Sweden)

    E. Kaewnuam

    Full Text Available Lithium yittrium/lanthanum borate glasses doped with Sm ion were prepared by melt quenching technique. Both glasses were studied comparatively in Sm ion local environment and its effect to luminescence properties. XANES indicated that Sm ions in both glasses act as Sm3+ similar as original in Sm2O3 powder. EXFAS result showed that Sm3+ in both glasses are surrounded with first shell neighbor by six particles of oxygen. Sm-O distance and its fluctuation value in LiYBSm is larger than in LiLaSm glass. Latter value represents more asymmetric environment around Sm3+ in LiYB than in LiLaB system. This lead to better ability of absorption and emission in LiYBSm glass which appear in the spectra. The first and second strongest emission of both glasses belong to photon with 600 and 646 nm, via 403 excitation wavelength. From J-O analysis, LiYBSm glass performs more potential than LiLaSm, for using as lasing medium in high power laser with 600 nm and low-energy consumption laser with 646 nm. Keywords: Glass, Samarium, EXAFS, Judd Ofelt

  12. Low temperature superconductor and aligned high temperature superconductor magnetic dipole system and method for producing high magnetic fields

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, Ramesh; Scanlan, Ronald; Ghosh, Arup K.; Weggel, Robert J.; Palmer, Robert; Anerella, Michael D.; Schmalzle, Jesse

    2017-10-17

    A dipole-magnet system and method for producing high-magnetic-fields, including an open-region located in a radially-central-region to allow particle-beam transport and other uses, low-temperature-superconducting-coils comprised of low-temperature-superconducting-wire located in radially-outward-regions to generate high magnetic-fields, high-temperature-superconducting-coils comprised of high-temperature-superconducting-tape located in radially-inward-regions to generate even higher magnetic-fields and to reduce erroneous fields, support-structures to support the coils against large Lorentz-forces, a liquid-helium-system to cool the coils, and electrical-contacts to allow electric-current into and out of the coils. The high-temperature-superconducting-tape may be comprised of bismuth-strontium-calcium-copper-oxide or rare-earth-metal, barium-copper-oxide (ReBCO) where the rare-earth-metal may be yttrium, samarium, neodymium, or gadolinium. Advantageously, alignment of the large-dimension of the rectangular-cross-section or curved-cross-section of the high-temperature-superconducting-tape with the high-magnetic-field minimizes unwanted erroneous magnetic fields. Alignment may be accomplished by proper positioning, tilting the high-temperature-superconducting-coils, forming the high-temperature-superconducting-coils into a curved-cross-section, placing nonconducting wedge-shaped-material between windings, placing nonconducting curved-and-wedge-shaped-material between windings, or by a combination of these techniques.

  13. Effect of lanthanide on the microstructure and structure of LnMn{sub 0.5}Fe{sub 0.5}O{sub 3} nanoparticles with Ln=La, Pr, Nd, Sm and Gd prepared by the polymer precursor method

    Energy Technology Data Exchange (ETDEWEB)

    Romero, Mariano [Centro NanoMat/Cryssmat Lab/Cátedra de Física—DETEMA, Facultad de Química—UdelaR, Montevideo (Uruguay); Centro Interdisciplinario de Nanotecnología, Química y Física de Materiales—UdelaR, Montevideo (Uruguay); Faccio, Ricardo, E-mail: rfaccio@fq.edu.uy [Centro NanoMat/Cryssmat Lab/Cátedra de Física—DETEMA, Facultad de Química—UdelaR, Montevideo (Uruguay); Centro Interdisciplinario de Nanotecnología, Química y Física de Materiales—UdelaR, Montevideo (Uruguay); Martínez, Javier [Departamento de Física de La Plata, Universidad Nacional de La Plata, La Plata (Argentina); Instituto de Física de La Plata, CCT-La Plata—CONICET, La Plata (Argentina); Universidad Nacional del Noroeste de la Provincia de Buenos Aires, Corrientes (Argentina); Pardo, Helena; Montenegro, Benjamín [Centro NanoMat/Cryssmat Lab/Cátedra de Física—DETEMA, Facultad de Química—UdelaR, Montevideo (Uruguay); Centro Interdisciplinario de Nanotecnología, Química y Física de Materiales—UdelaR, Montevideo (Uruguay); Plá Cid, Cristiani Campos; Pasa, André A. [Laboratorio Central de microscopía electrónica, Universidad Federal de Santa Catarina, Florianópolis (Brazil); and others

    2015-01-15

    The synthesis of LnMn{sub 0.5}Fe{sub 0.5}O{sub 3} perovskite nanoparticles by the polymer precursor method showed a strong intrinsic dependence with different lanthanides (Ln=La, Pr, Nd, Sm and Gd). The polymerization level reached in the polymer precursor was proportional to the atomic number of lanthanide with exception of samarium, which showed the formation of a different precursor based in a citrate chelate with ethyleneglycol bonded as adduct. The increasing level of polymerization of the polymer precursors showed the formation of large-size perovskite nanoparticles after its calcination. SAXS and TEM analyses suggested that nanoparticles obtained, using this method, have a squared-like microstructure in connection with the polymer precursor microstructure. Structural analysis showed an orthorhombic structure with a slight decline in the Jahn–Teller distortion when the atomic number of lanthanide increases. Mössbauer spectroscopy showed the presence of a majority site in agreement with the Pbnm orthorhombic structure best fitted with Rietveld refinements and in some cases, a more distorted site attributed to local inhomogeneities and oxygen vacancies. - Highlights: • Precursor polymerization level is lower in the presence of lighter lanthanides. • Lighter lanthanide perovskite nanoparticles after calcination are lower-sized. • Nanoparticles obtained by this method have lamellae microstructure. • Jahn–Teller distortion declines for heavier lanthanide perovskites. • Oxygen vacancy phase was observed in lighter lanthanide perovskites.

  14. High pressure measurement of the uniaxial stress of host layers on intercalants and staging transformation of intercalation compounds

    CERN Document Server

    Park, T R; Kim, H; Min, P

    2002-01-01

    A layered double-hydroxide intercalation compound was synthesized to measure the uniaxial stress the host layers exert on the intercalants. To measure the uniaxial stress, we employed the photoluminescence (PL) from the intercalated species, the Sm ion complex, as it is sensitive to the deformation of the intercalants. Of the many PL peaks the Sm ion complex produces, the one that is independent of the counter-cation environment was chosen for the measurement since the Sm ion complexes are placed under a different electrostatic environment after intercalation. The peak position of the PL was redshifted linearly with increasing hydrostatic pressure on the intercalated sample. Using this pressure-induced redshifting rate and the PL difference at ambient pressure between the pre-intercalation and the intercalated ions, we found that, in the absence of external pressure, the uniaxial stress exerted on the samarium ion complexes by the host layers was about 13.9 GPa at room temperature. Time-resolved PL data also ...

  15. Efficient separation of transition metals from rare earths by an undiluted phosphonium thiocyanate ionic liquid.

    Science.gov (United States)

    Rout, Alok; Binnemans, Koen

    2016-06-21

    The ionic liquid trihexyl(tetradecyl)phosphonium thiocyanate has been used for the extraction of the transition metal ions Co(ii), Ni(ii), Zn(ii), and the rare-earth ions La(iii), Sm(iii) and Eu(iii) from aqueous solutions containing nitrate or chloride salts. The transition metal ions showed a high affinity for the ionic liquid phase and were efficiently extracted, while the extraction efficiency of the rare-earth ions was low. This difference in extraction behavior enabled separation of the pairs Co(ii)/Sm(iii), Ni(ii)/La(iii) and Zn(ii)/Eu(iii). These separations are relevant for the recycling of rare earths and transition metals from samarium cobalt permanent magnets, nickel metal hydride batteries and lamp phosphors, respectively. The extraction of metal ions from a chloride or nitrate solution with a thiocyanate ionic liquid is an example of "split-anion extraction", where different anions are present in the aqueous and ionic liquid phase. Close to 100% loading was possible for Co(ii) and Zn(ii) up to a concentration of 40 g L(-1) of the transition metal salt in the initial aqueous feed solution, whereas the extraction efficiency for Ni(ii) gradually decreased with increase in the initial feed concentration. Stripping of Co(ii), Zn(ii) and Ni(ii) from the loaded ionic liquid phase was possible by a 15 wt% NH3 solution. The ionic liquid could reused after extraction and stripping.

  16. Application of imaging plates to x-ray imaging and spectroscopy in laser plasma experiments (invited)

    Science.gov (United States)

    Izumi, N.; Snavely, R.; Gregori, G.; Koch, J. A.; Park, H.-S.; Remington, B. A.

    2006-10-01

    We report recent progress in x-ray diagnosis of laser-plasma experiments using imaging plates. Imaging plates are photostimulable phosphor screens [BaF(Br0.85,I0.15):Eu2+] deposited on flexible metal or plastic substrates. We applied imaging plates to x-ray microscopy of inertial confinement fusion experiments. Self-emission x-ray images of imploded cores were obtained successfully with high-magnification, target-mounted pinholes using imaging plates as detectors. Imaging plates were also used in ultraintense laser experiments at the Rutherford Appleton Laboratory, where small samarium foils were irradiated by high intensity laser pulses from the Vulcan laser system. K-shell x rays from the foil (˜40keV) were used as a line x-ray source for one-dimensional microscopic radiography, and the performance of imaging plates on high-energy x-ray backlit radiography experiments was demonstrated by imaging sinusoidal grooves of 6μm amplitude on a Au foil. Detailed K-shell spectra from Cu targets were also obtained by coupling an imaging plate with a highly ordered pyrolytic graphite crystal spectrometer. The performance of the imaging plates as evaluated in actual laser plasma experiments is presented.

  17. Comparative toxicity of seven rare earth elements in sea urchin early life stages.

    Science.gov (United States)

    Trifuoggi, Marco; Pagano, Giovanni; Guida, Marco; Palumbo, Anna; Siciliano, Antonietta; Gravina, Maria; Lyons, Daniel M; Burić, Petra; Levak, Maja; Thomas, Philippe J; Giarra, Antonella; Oral, Rahime

    2017-09-01

    The widespread use of rare earth elements (REEs) in a number of technological applications raises unanswered questions related to REE-associated adverse effects. We have previously reported on the multiple impact of some REEs on the early life stages of the sea urchin Paracentrotus lividus. The present investigation was to evaluate REE toxicity to early life stages in two unrelated sea urchin species, Sphaerechinus granularis and Arbacia lixula. The comparative toxicities were tested of seven REEs, namely yttrium, lanthanum, cerium, neodymium, samarium, europium and gadolinium as chloride salts at concentrations ranging from 10-7 to 10-4 M. The evaluated endpoints included developmental defects and cytogenetic anomalies in REE-exposed embryos/larvae, and decreased fertilization success and offspring damage following sperm exposure. The results showed different toxicity patterns for individual REEs that varied according to test species and to treatment protocol, thus showing toxicity scaling for the different REEs. Further, the observed effects were compared with those reported for P. lividus either following embryo or sperm exposures. S. granularis showed a significantly higher sensitivity both compared to A. lixula and to P. lividus. This study provides clear-cut evidence for distinct toxicity patterns among a series of REEs. The differences in species sensitivity at micromolar REE levels may warrant investigations on species susceptibility to impacts along polluted coasts.

  18. Lanthanide(III) complexes are more active inhibitors of the Fenton reaction than pure ligands.

    Science.gov (United States)

    Martin, Jan; Mladěnka, Přemysl; Saso, Luciano; Kostova, Irena

    2016-03-01

    This study is an extension to our finding of direct anti-oxidant activities of lanthanide(III) complexes with the heterocyclic compound, 5-aminoorotic acid (AOA). In this experiment, we used AOA and coumarin-3-carboxylic acid as the two heterocyclic compounds with anti-oxidant potential, to produce the complexes with different lanthanides. Lanthanide(III) complexes were tested on the iron-driven Fenton reaction. The product of this reaction, the hydroxyl radical, was detected by HPLC. All complexes as well as their ligands had positive or neutral effect on the Fenton reaction but their behavior was different. Both pure ligands in low concentration ratio to iron were inefficient in contrast to some of their complexes. Complexes of neodymium, samarium, gadolinium, and partly of cerium blocked the Fenton reaction at very low ratios (in relation to iron) but the effect disappeared at higher ratios. In contrast, lanthanum complexes appeared to be the most promising. Both blocked the Fenton reaction in a dose-dependent manner. Lanthanide(III) complexes were proven to block the iron-driven production of the hydroxyl radical. Second, the lanthanide(III) element appears to be crucial for the anti-oxidant effect. Overall, lanthanum complexes may be promising direct anti-oxidants for future testing.

  19. Study of Optical and Structural Characteristics of Ceria Nanoparticles Doped with Negative and Positive Association Lanthanide Elements

    Directory of Open Access Journals (Sweden)

    N. Shehata

    2014-01-01

    Full Text Available This paper studies the effect of adding lanthanides with negative association energy, such as holmium and erbium, to ceria nanoparticles doped with positive association energy lanthanides, such as neodymium and samarium. That is what we called mixed doped ceria nanoparticles (MDC NPs. In MDC NPs of grain size range around 6 nm, it is proved qualitatively that the conversion rate from Ce4+ to Ce3+ is reduced, compared to ceria doped only with positive association energy lanthanides. There are many pieces of evidence which confirm the obtained conclusion. These indications are an increase in the allowed direct band gap which is calculated from the absorbance dispersion measurements, a decrease in the emitted fluorescence intensity, and an increase in the size of nanoparticles, which is measured using both techniques: transmission electron microscope (TEM and X-ray diffractometer (XRD. That gives a novel conclusion that there are some trivalent dopants, such as holmium and erbium, which can suppress Ce3+ ionization states in ceria and consequently act as scavengers for active O-vacancies in MDC. This promising concept can develop applications which depend on the defects in ceria such as biomedicine, electronic devices, and gas sensors.

  20. High performance of SDC and GDC core shell type composite electrolytes using methane as a fuel for low temperature SOFC

    Energy Technology Data Exchange (ETDEWEB)

    Irshad, Muneeb; Siraj, Khurram, E-mail: razahussaini786@gmail.com, E-mail: khurram.uet@gmail.com; Javed, Fayyaz; Ahsan, Muhammad; Rafique, Muhammad Shahid [Department of Physics, University of Engineering and Technology, Lahore (Pakistan); Raza, Rizwan, E-mail: razahussaini786@gmail.com, E-mail: khurram.uet@gmail.com [Department of Physics, COMSATS Institute of Information Technology, Lahore (Pakistan); Shakir, Imran [Deanship of scientific research, College of Engineering, PO Box 800, King Saud University, Riyadh 11421 (Saudi Arabia)

    2016-02-15

    Nanocomposites Samarium doped Ceria (SDC), Gadolinium doped Ceria (GDC), core shell SDC amorphous Na{sub 2}CO{sub 3} (SDCC) and GDC amorphous Na{sub 2}CO{sub 3} (GDCC) were synthesized using co-precipitation method and then compared to obtain better solid oxide electrolytes materials for low temperature Solid Oxide Fuel Cell (SOFCs). The comparison is done in terms of structure, crystallanity, thermal stability, conductivity and cell performance. In present work, XRD analysis confirmed proper doping of Sm and Gd in both single phase (SDC, GDC) and dual phase core shell (SDCC, GDCC) electrolyte materials. EDX analysis validated the presence of Sm and Gd in both single and dual phase electrolyte materials; also confirming the presence of amorphous Na{sub 2}CO{sub 3} in SDCC and GDCC. From TGA analysis a steep weight loss is observed in case of SDCC and GDCC when temperature rises above 725 °C while SDC and GDC do not show any loss. The ionic conductivity and cell performance of single phase SDC and GDC nanocomposite were compared with core shell GDC/amorphous Na{sub 2}CO{sub 3} and SDC/ amorphous Na{sub 2}CO{sub 3} nanocomposites using methane fuel. It is observed that dual phase core shell electrolytes materials (SDCC, GDCC) show better performance in low temperature range than their corresponding single phase electrolyte materials (SDC, GDC) with methane fuel.

  1. High performance of SDC and GDC core shell type composite electrolytes using methane as a fuel for low temperature SOFC

    Science.gov (United States)

    Irshad, Muneeb; Siraj, Khurram; Raza, Rizwan; Javed, Fayyaz; Ahsan, Muhammad; Shakir, Imran; Rafique, Muhammad Shahid

    2016-02-01

    Nanocomposites Samarium doped Ceria (SDC), Gadolinium doped Ceria (GDC), core shell SDC amorphous Na2CO3 (SDCC) and GDC amorphous Na2CO3 (GDCC) were synthesized using co-precipitation method and then compared to obtain better solid oxide electrolytes materials for low temperature Solid Oxide Fuel Cell (SOFCs). The comparison is done in terms of structure, crystallanity, thermal stability, conductivity and cell performance. In present work, XRD analysis confirmed proper doping of Sm and Gd in both single phase (SDC, GDC) and dual phase core shell (SDCC, GDCC) electrolyte materials. EDX analysis validated the presence of Sm and Gd in both single and dual phase electrolyte materials; also confirming the presence of amorphous Na2CO3 in SDCC and GDCC. From TGA analysis a steep weight loss is observed in case of SDCC and GDCC when temperature rises above 725 °C while SDC and GDC do not show any loss. The ionic conductivity and cell performance of single phase SDC and GDC nanocomposite were compared with core shell GDC/amorphous Na2CO3 and SDC/ amorphous Na2CO3 nanocomposites using methane fuel. It is observed that dual phase core shell electrolytes materials (SDCC, GDCC) show better performance in low temperature range than their corresponding single phase electrolyte materials (SDC, GDC) with methane fuel.

  2. High performance of SDC and GDC core shell type composite electrolytes using methane as a fuel for low temperature SOFC

    Directory of Open Access Journals (Sweden)

    Muneeb Irshad

    2016-02-01

    Full Text Available Nanocomposites Samarium doped Ceria (SDC, Gadolinium doped Ceria (GDC, core shell SDC amorphous Na2CO3 (SDCC and GDC amorphous Na2CO3 (GDCC were synthesized using co-precipitation method and then compared to obtain better solid oxide electrolytes materials for low temperature Solid Oxide Fuel Cell (SOFCs. The comparison is done in terms of structure, crystallanity, thermal stability, conductivity and cell performance. In present work, XRD analysis confirmed proper doping of Sm and Gd in both single phase (SDC, GDC and dual phase core shell (SDCC, GDCC electrolyte materials. EDX analysis validated the presence of Sm and Gd in both single and dual phase electrolyte materials; also confirming the presence of amorphous Na2CO3 in SDCC and GDCC. From TGA analysis a steep weight loss is observed in case of SDCC and GDCC when temperature rises above 725 °C while SDC and GDC do not show any loss. The ionic conductivity and cell performance of single phase SDC and GDC nanocomposite were compared with core shell GDC/amorphous Na2CO3 and SDC/ amorphous Na2CO3 nanocomposites using methane fuel. It is observed that dual phase core shell electrolytes materials (SDCC, GDCC show better performance in low temperature range than their corresponding single phase electrolyte materials (SDC, GDC with methane fuel.

  3. Uranium hydrogeochemical and stream sediment reconnaissance data release for the Dubois NTMS Quadrangle, Idaho/Montana, including concentrations of forty-five additional elements

    Energy Technology Data Exchange (ETDEWEB)

    LaDelfe, C.M.

    1980-08-01

    Totals of 1024 water samples and 1600 sediment samples were collected from 1669 locations in the Dubois quadrangle. Water samples were taken at streams, springs, and wells; sediment samples were collected from streams and springs. All field and analytical data are presented for waters in Appendix I-A and for sediments in I-B. All elemental analyses were performed at the LASL. Water samples were initially analyzed for uranium by fluorometry. All water samples containing more than the upper detection limit of uranium were reanalyzed by delayed neutron counting. Sediments were analyzed for uranium and thorium as well as aluminum, antimony, arsenic, barium, beryllium, bismuth, cadmium, calcium, cerium, cesium, chlorine, chromium, cobalt, copper, dysprosium, europium, gold, hafnium, iron, lanthanum, lead, lithium, lutetium, magnesium, manganese, nickel, niobium, potassium rubidium, samarium, scandium, selenium, silver, sodium, strontium, tantalum, terbium, tin, titanium, tungsten, vanadium, ytterbium, zinc and zirconium. All sediments were analyzed for uranium by delayed-neutron counting. Other elemental concentrations in sediments were determined by neutron-activation analysis for 30 elements, by x-ray fluorescence for 12 elements, and by arc-source emission spectrography for 2 elements. Analytical results for sediments are reported as parts per million.

  4. Electrochemical investigation of mixed metal oxide nanocomposite electrode for low temperature solid oxide fuel cell

    Science.gov (United States)

    Abbas, Ghazanfar; Raza, Rizwan; Ashfaq Ahmad, M.; Ajmal Khan, M.; Jafar Hussain, M.; Ahmad, Mukhtar; Aziz, Hammad; Ahmad, Imran; Batool, Rida; Altaf, Faizah; Zhu, Bin

    2017-10-01

    Zinc-based nanostructured nickel (Ni) free metal oxide electrode material Zn0.60/Cu0.20Mn0.20 oxide (CMZO) was synthesized by solid state reaction and investigated for low temperature solid oxide fuel cell (LTSOFC) applications. The crystal structure and surface morphology of the synthesized electrode material were examined by XRD and SEM techniques respectively. The particle size of ZnO phase estimated by Scherer’s equation was 31.50 nm. The maximum electrical conductivity was found to be 12.567 S/cm and 5.846 S/cm in hydrogen and air atmosphere, respectively at 600∘C. The activation energy of the CMZO material was also calculated from the DC conductivity data using Arrhenius plots and it was found to be 0.060 and 0.075 eV in hydrogen and air atmosphere, respectively. The CMZO electrode-based fuel cell was tested using carbonated samarium doped ceria composite (NSDC) electrolyte. The three layers 13 mm in diameter and 1 mm thickness of the symmetric fuel cell were fabricated by dry pressing. The maximum power density of 728.86 mW/cm2 was measured at 550∘C.

  5. Strategic Materials in the Automobile: A Comprehensive Assessment of Strategic and Minor Metals Use in Passenger Cars and Light Trucks.

    Science.gov (United States)

    Field, Frank R; Wallington, Timothy J; Everson, Mark; Kirchain, Randolph E

    2017-12-19

    A comprehensive component-level assessment of several strategic and minor metals (SaMMs), including copper, manganese, magnesium, nickel, tin, niobium, light rare earth elements (LREEs; lanthanum, cerium, praseodymium, neodymium, promethium, and samarium), cobalt, silver, tungsten, heavy rare earth elements (yttrium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, and lutetium), and gold, use in the 2013 model year Ford Fiesta, Focus, Fusion, and F-150 is presented. Representative material contents in cars and light-duty trucks are estimated using comprehensive, component-level data reported by suppliers. Statistical methods are used to accommodate possible errors within the database and provide estimate bounds. Results indicate that there is a high degree of variability in SaMM use and that SaMMs are concentrated in electrical, drivetrain, and suspension subsystems. Results suggest that trucks contain greater amounts of aluminum, nickel, niobium, and silver and significantly greater amounts of magnesium, manganese, gold, and LREEs. We find tin and tungsten use in automobiles to be 3-5 times higher than reported by previous studies which have focused on automotive electronics. Automotive use of strategic and minor metals is substantial, with 2013 vehicle production in the United States, Canada, EU15, and Japan alone accounting for approximately 20% of global production of Mg and Ta and approximately 5% of Al, Cu, and Sn. The data and analysis provide researchers, recyclers, and decision-makers additional insight into the vehicle content of strategic and minor metals of current interest.

  6. System for radiation delivery applied to brachytherapy using a polymeric vehicle

    Energy Technology Data Exchange (ETDEWEB)

    Barbosa Junior, Iorque L.; Campos, Tarcisio P.R. [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). PCA 1 - Anexo Engenharia]. E-mail: iorque@eng-nucl.mest.ufmg.br; campos@nuclear.ufmg.br

    2007-07-01

    This work describes a system for radiation delivery applied to brachytherapy using radioactive macroaggregate produced by sol-gel route incorporating Samarium-153 loaded in a polymeric vehicle. The polymer Poly Vinyl Alcohol, PVA, was selected as vehicle. It presents high biocompatibility and is suitable for low temperature handling. The PVA is the water-soluble synthetic resin more produced in the world being used in several applications including controlled drugs delivery. The developed polymeric delivery system is presented as flexible flat surface with a load of macroaggregate in the form of micro seeds or dispersed dust. Such device fits in various brachytherapy applications, especially in interstitial or intracavitary implants and intraoperative radiation therapy. These systems provide mechanical sustainment for the radioactive macroaggregates in well defined spatial distribution improving the conformation of the absorbed dose in the organ or tumor and it can be set up during surgery quickly and safely, reducing the radiation exposition of the medical crew. The degradation time in physiological solution are presented. (author)

  7. Lanthanide phytanates: liquid-crystalline phase behavior, colloidal particle dispersions, and potential as medical imaging agents.

    Science.gov (United States)

    Conn, Charlotte E; Panchagnula, Venkateswarlu; Weerawardena, Asoka; Waddington, Lynne J; Kennedy, Danielle F; Drummond, Calum J

    2010-05-04

    Lanthanide salts of phytanic acid, an isoprenoid-type amphiphile, have been synthesized and characterized. Elemental analysis and FTIR spectroscopy were used to confirm the formed product and showed that three phytanate anions are complexed with one lanthanide cation. The physicochemical properties of the lanthanide phytanates were investigated using DSC, XRD, SAXS, and cross-polarized optical microscopy. Several of the hydrated salts form a liquid-crystalline hexagonal columnar mesophase at room temperature, and samarium(III) phytanate forms this phase even in the absence of water. Select lanthanide phytanates were dispersed in water, and cryo-TEM images indicate that some structure has been retained in the dispersed phase. NMR relaxivity measurements were conducted on these systems. It has been shown that a particulate dispersion of gadolinium(III) phytanate displays proton relaxivity values comparable to those of a commercial contrast agent for magnetic resonance imaging and a colloidal dispersion of europium(III) phytanate exhibits the characteristics of a fluorescence imaging agent.

  8. Infrared luminescence and thermoluminescence of lithium borate glasses doped with Sm3+ ions

    Directory of Open Access Journals (Sweden)

    Anjaiah J.

    2015-03-01

    Full Text Available Thermoluminescence (TL characteristics of X-ray irradiated pure and doped with Sm3+ ions Li2O-MO-B2O3 (where MO=ZnO, CaO, CdO glasses have been studied in the temperature range of 303 to 573 K. All the pure glasses exhibited single TL peaks at 382 K, 424 K and 466 K. When these glasses were doped with Sm3+ ions no additional peaks have been observed but the glow peak temperature of the existing glow peak shifted gradually towards higher temperatures with gain in intensity of TL light output. The area under the glow curve was found to be maximum for Sm3+ doped glasses mixed with cadmium oxide as a modifier. The trap depth parameters associated with the observed TL peaks have been evaluated using Chen’s formulae. The possible use of these glasses in radiation dosimetry has been described. The results clearly showed that samarium doped cadmium borate glass has a potential to be considered as a thermoluminescence dosimeter.

  9. Growth of early continental crust controlled by melting of amphibolite in subduction zones.

    Science.gov (United States)

    Foley, Stephen; Tiepolo, Massimo; Vannucci, Riccardo

    2002-06-20

    It is thought that the first continental crust formed by melting of either eclogite or amphibolite, either at subduction zones or on the underside of thick oceanic crust. However, the observed compositions of early crustal rocks and experimental studies have been unable to distinguish between these possibilities. Here we show a clear contrast in trace-element ratios of melts derived from amphibolites and those from eclogites. Partial melting of low-magnesium amphibolite can explain the low niobium/tantalum and high zirconium/samarium ratios in melts, as required for the early continental crust, whereas the melting of eclogite cannot. This indicates that the earliest continental crust formed by melting of amphibolites in subduction-zone environments and not by the melting of eclogite or magnesium-rich amphibolites in the lower part of thick oceanic crust. Moreover, the low niobium/tantalum ratio seen in subduction-zone igneous rocks of all ages is evidence that the melting of rutile-eclogite has never been a volumetrically important process.

  10. New burnup calculation of TRIGA IPR-R1 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Meireles, Sincler P. de; Campolina, Daniel de A.M.; Santos, Andre A. Campagnole dos; Menezes, Maria A.B.C.; Mesquita, Amir Z., E-mail: sinclercdtn@hotmail.com.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2015-07-01

    The IPR-R1 TRIGA Mark I research reactor, located at the Nuclear Technology Development Center - CDTN, Belo Horizonte, Brazil, operates since 1960.The reactor is operating for more than fifty years and has a long history of operation. Determining the current composition of the fuel is very important to calculate various parameters. The reactor burnup calculation has been performed before, however, new techniques, methods, software and increase of the processing capacity of the new computers motivates new investigations to be performed. This work presents the evolution of effective multiplication constant and the results of burnup. This new model has a more detailed geometry with the introduction of the new devices, like the control rods and the samarium discs. This increase of materials in the simulation in burnup calculation was very important for results. For these series of simulations a more recently cross section library, ENDF/B-VII, was used. To perform the calculations two Monte Carlo particle transport code were used: Serpent and MCNPX. The results obtained from two codes are presented and compared with previous studies in the literature. (author)

  11. Microwave-induced combustion synthesis and electrical properties of Ce 1- xSm xO 2-1/2 x ceramics

    Science.gov (United States)

    Fu, Yen-Pei; Lin, Cheng-Hsiung; Liu, Chung-Wen; Tay, Kok-Wan; Wen, Shaw-Bing

    Ce 1- xSm xO 2-1/2 x nanopowders were successfully synthesized by microwave-induced combustion process. For the preparation, cerium(III) nitrate hexahydrate, samarium(III) nitrate hexahydrate, and urea were used for the microwave-induced combustion process. The process took only a few minutes to obtain Ce 1- xSm xO 2-1/2 x powders. Ce 1- xSm xO 2-1/2 x ceramics prepared by microwave-induced process sintered at 1400 °C for 3 h, the bulk density of Ce 1- xSm xO 2-1/2 x ceramics were over 95% of the theoretical density. The results revealed that Ce 0.84Sm 0.16O 1.92 possessed the maximum electrical conductivity was 0.0287 S cm -1 at 850 °C and the minimum activity energy, E a was 0.9565 eV determined from 500 to 850 °C.

  12. Measurement of the Slowing-Down and Thermalization Time of Neutrons in Water

    Energy Technology Data Exchange (ETDEWEB)

    Moeller, E. [AB Atomenergi, Nykoeping (Sweden); Sjoestrand, N.G. [Chalmers Univ. of Technology, Goeteborg (Sweden)

    1963-11-15

    The experimental equipment for the study of the time behaviour of neutrons during slowing-down and thermalization in a moderator by the use of a pulsed van de Graaff accelerator as a neutron source is described. Information on the change with time of the neutron spectrum is obtained from its reaction with spectrum indicators, the reaction rate being observed by the detection of capture gamma rays. The time resolution may be chosen in the range 0.01 to 5 {mu}s. Measurements have been made for water with cadmium, gadolinium and samarium as indicators dissolved in the medium. A slowing- down time to 0.2 eV of 2.7 {+-} 0.4 {mu}s and a total thermalization time of 25 - 30 {mu}s were obtained. From 9 {mu}s after the injection, the results are well described by the assumption of the flux as a Maxwell distribution cooling down to the moderator temperature with a thermalization time constant of 4.1 {+-} 0.4 {mu}s.

  13. Preparation and Biocompatible Surface Modification of Redox Altered Cerium Oxide Nanoparticle Promising for Nanobiology and Medicine

    KAUST Repository

    Nanda, Himansu Sekhar

    2016-11-03

    The biocompatible surface modification of metal oxide nanoparticles via surface functionalization technique has been used as an important tool in nanotechnology and medicine. In this report, we have prepared aqueous dispersible, trivalent metal ion (samarium)-doped cerium oxide nanoparticles (SmCNPs) as model redox altered CNPs of biological relevance. SmCNP surface modified with hydrophilic biocompatible (6-{2-[2-(2-methoxy-ethoxy)-ethoxy]-ethoxy}-hexyl) triethoxysilane (MEEETES) were prepared using ammonia-induced ethylene glycol-assisted precipitation method and were characterized using a variety of complementary characterization techniques. The chemical interaction of functional moieties with the surface of doped nanoparticle was studied using powerful 13C cross polarization magic angle sample spinning nuclear magnetic resonance spectroscopy. The results demonstrated the production of the extremely small size MEEETES surface modified doped nanoparticles with significant reduction in aggregation compared to their unmodified state. Moreover, the functional moieties had strong chemical interaction with the surface of the doped nanoparticles. The biocompatible surface modification using MEEETES should also be extended to several other transition metal ion doped and co-doped CNPs for the production of aqueous dispersible redox altered CNPs that are promising for nanobiology and medicine.

  14. A catalyst-free addition reaction of zinc amide enolates to N-sulfonyle imines

    Energy Technology Data Exchange (ETDEWEB)

    Joo, Seong Ryu; Im, Pyeong Won; Kim, Jong Sung; Kim, Seung Hoi [Dept. of Chemistry, Dankook University, Cheonan (Korea, Republic of); Park Soo Youl [Interface Chemistry and Engineering Research Team, Korea Research Institute of Chemical Technology, Daejon (Korea, Republic of)

    2016-12-15

    Despite the remarkable expansion of the imino-Reformatsky reaction, one interesting aspect is that, to the best of our knowledge, zinc enolates derived solely from α-halo esters have been mainly used in the recent progress. In contrast, a few limited examples have been reported concerning the application of zinc enolates derived from α-halo amide to the imino-Reformatsky reaction. In recent years, Rodriguez-Solla and co-workers reported the addition reaction of samarium enolates derived from both α-halo esters and amides to imines, resulting in the synthe- sis of β-amino esters or amides. In conclusion, we established a potential synthetic proto- col for the preparation of β-amino amides. This work was accomplished by the direct addition of zinc amide enolates to N-sulfonyl imines in the absence of any metal-catalyst under mild conditions. Due to the operational simplicity of the proposed method, it can be further utilized in synthetic organic chemistry. Further studies to elucidate the scope of this approach are currently underway in our laboratory.

  15. Super-chondritic Sm/Nd ratios in Mars, the Earth and the Moon.

    Science.gov (United States)

    Caro, Guillaume; Bourdon, Bernard; Halliday, Alex N; Quitté, Ghylaine

    2008-03-20

    Small isotopic differences in the atomic abundance of neodymium-142 (142Nd) in silicate rocks represent the time-averaged effect of decay of formerly live samarium-146 (146Sm) and provide constraints on the timescales and mechanisms by which planetary mantles first differentiated. This chronology, however, assumes that the composition of the total planet is identical to that of primitive undifferentiated meteorites called chondrites. The difference in the 142Nd/144Nd ratio between chondrites and terrestrial samples may therefore indicate very early isolation (Mars also has a non-chondritic composition. Meteorites belonging to the shergottite subgroup define a planetary isochron yielding an age of differentiation of 40 +/- 18 Myr for the martian mantle. This isochron does not pass through the chondritic reference value (100 x epsilon(142)Nd = -21 +/- 3; 147Sm/144Nd = 0.1966). The Earth, Moon and Mars all seem to have accreted in a portion of the inner Solar System with approximately 5 per cent higher Sm/Nd ratios than material accreted in the asteroid belt. Such chemical heterogeneities may have arisen from sorting of nebular solids or from impact erosion of crustal reservoirs in planetary precursors. The 143Nd composition of the primitive mantle so defined by 142Nd is strikingly similar to the putative endmember component 'FOZO' characterized by high 3He/4He ratios.

  16. Luminescence studies on gamma irradiated RbCl:Sm 3+ and RbBr:Sm 3+crystals

    Science.gov (United States)

    Manimozhi, P. K.; Muralidharan, G.

    2009-03-01

    This paper presents and discusses the results obtained on the thermoluminescence (TL) and other optical studies of gamma irradiated RbCl:Sm 3+ and RbBr:Sm 3+ crystals. Samarium when doped into the RbCl and RbBr is found to enter the host lattice in its trivalent state and act as electron trap during gamma irradiation, there by partially converting itself to Sm 2+. The photoluminescence (PL) spectra of both RbCl and RbBr crystals doped with Sm exhibit the strong red/orange emissions of Sm corresponding to 4G 5/2 → 6H 9/2 (red) and 4G 5/2 → 6H 7/2 (orange) transitions. Z 3 centers are observed in RbBr on F bleaching subsequent to gamma irradiation and a TL glow peak attributable to the same has been identified. The thermoluminescence (TL) glow curve explains the defect annihilation process to be due to the mobilization of two different kinds of traps created as a result of exposure to high energy irradiation in both the cases. Spectral distribution under the thermoluminescence emission (TLE) and optically stimulated emission(OSL), support the idea that defect annihilation process to be due to thermal release of F electron in RbCl:Sm 3+ and in RbBr:Sm 3+ crystals. Both Sm 3+ and Sm 2+ emissions were observed in the thermoluminescence emission of the crystals.

  17. Yttrium and lanthanum recovery from low cerium carbonate, yttrium carbonate and yttrium concentrate; Aproveitamento de itrio e lantanio de um carbonato de terras raras de baixo teor em cerio, de um carbonato de itrio e de um oxido de terras itricas

    Energy Technology Data Exchange (ETDEWEB)

    Vasconcelos, Mari Estela de

    2006-07-01

    In this work, separation, enrichment and purification of lanthanum and yttrium were performed using as raw material a commercial low cerium rare earth concentrate named LCC (low cerium carbonate), an yttrium concentrate named 'yttrium carbonate', and a third concentrated known as 'yttrium earths oxide. The first two were industrially produced by the late NUCLEMON - NUCLEBRAS de Monazita e Associados Ltda, using Brazilian monazite. The 'yttrium earths oxide' come from a process for preparation of lanthanum during the course of the experimental work for the present thesis. The following techniques were used: fractional precipitation with urea; fractional leaching of the LCC using ammonium carbonate; precipitation of rare earth peroxycarbonates starting from the rare earth complex carbonates. Once prepared the enriched rare earth fractions the same were refined using the ion exchange chromatography with strong cationic resin without the use of retention ion and elution using the ammonium salt of ethylenediaminetetraacetic acid. With the association of the above mentioned techniques were obtained pure oxides of yttrium (>97,7%), lanthanum (99,9%), gadolinium (96,6%) and samarium (99,9%). The process here developed has technical and economic viability for the installation of a large scale unity. (author)

  18. Rare earths: preparation of spectro chemically pure standards, study of their carbonates and synthesis of a new compound series - the peroxy carbonates; Terras-raras: obtencao de padroes espectroquimicos, estudo dos carbonatos e sintese dos peroxicarbonatos. Uma nova serie de compostos

    Energy Technology Data Exchange (ETDEWEB)

    Queiroz, Carlos Alberto da Silva

    1996-05-01

    In this work the following studies are concerned: I) preparation of lanthanum, cerium, praseodymium, neodymium and samarium oxides for use as spectro chemically pure standards; II) behavior of the rare earth (La, Ce, Pr, Nd, Sm) carbonates soluble in ammonium carbonate and mixture of ammonium carbonate/ammonium hydroxide, and III) synthesis and characterization of rare earth peroxy carbonates - a new series of compounds. Data for the synthesis and characterization of the rare earths peroxy carbonates described for the first time in this work are presented and discussed. With the aid of thermal analysis (TG-DTG) the thermal stability and the stoichiometric composition for new compounds were established and a mechanism of thermal decomposition was proposed. The peroxy carbonate was prepared by the addition of hydrogen peroxyde to the complexed soluble rare earths carbonates. These studies included also the determinations of active oxygen, the total rare earth oxide by gravimetry and complexometry and the C, H and N contents by microanalysis. The new compounds were also investigated by infrared spectroscopy. (author)

  19. Spectres d'absorption X dans les plasmas femtosecondes

    Science.gov (United States)

    Bastiani-Ceccotti, S.; Audebert, P.; Renaudin, P.; Chenais-Popovics, C.; Geindre, J. P.; Tzortzakis, S.; Nagels-Silvert, V.; Shepherd, R.; Matsushima, I.; Gary, S.; Girard, F.; Peyrusse, O.; Gauthier, J. C.

    2005-06-01

    Nous avons mesuré le spectre d'absorption en couche K de plasmas d'aluminium à haute densité. Deux faisceaux de la chaîne laser femtoseconde 100 TW du LULI (de durée 300 fs) ont été utilisés pour produire le plasma absorbant sur une feuille mince d'Al (830 Å ou 500 Å), et la source de radiographie sur du samarium massif. Les spectres X étaient résolus spatialement dans une direction perpendiculaire à la direction de la dispersion spectrale. Les spectres ont été mesurés pour différents retards entre la source deradiographie et le plasma d'Al. Des simulations des spectres et de l'ionisation en fonction du temps et de l'intensité, obtenues au moyen de codes hydrodynamiques et de structure atomique, montrent un bon accord avec les résultats expérimentaux.

  20. Dielectric dispersion and energy band gap of Bi{sub 1.5−x}Sm{sub x}Zn{sub 0.92}Nb{sub 1.5}O{sub 6.92} solid solution

    Energy Technology Data Exchange (ETDEWEB)

    Qasrawi, A.F., E-mail: aqasrawi@atilim.edu.tr [Department of Physics, Arab-American University, Jenin, West Bank, Palestine (Country Unknown); Group of Physics, Faculty of Engineering, Atilim University, 06836 Ankara (Turkey); Mergen, A. [Metallurgical and Materials Engineering Department, Marmara University, 34722 Istanbul (Turkey)

    2014-05-01

    The optical transmittance and reflectance spectra of samarium doped bismuth–zinc–niobium-oxide (BZN) pyrochlore ceramics are investigated in the wavelength range of 200–1050 nm (200–1500 THz). The Sm content in the Bi{sub 1.5−x}Sm{sub x}Zn{sub 0.92}Nb{sub 1.5}O{sub 6.92} solid solution significantly alters the optical properties. Therefore, increasing the Sm doping ratio from x=0.10 to x=0.13 decreased the indirect forbidden energy band gap from 3.60 to 3.05 eV. In addition, above 350 THz, increasing the Sm content decreases the dielectric constant values and alters the dielectric dispersion parameters. The dielectric spectra which were evaluated in the frequency range of 200–1500 THz reflected a sharp decrease in the dielectric constant with increasing frequency down to 358 THz. The spectra reflected a resonance peak at this frequency. Such resonance spectrum is promising for technological applications as it is close to the illumination of 870 nm IR lasers that are used in optical communications. The calculated oscillator (E{sub o}) and dispersion (E{sub d}) energies near that critical range (375–425 THz) reflected an increase in both E{sub o} and E{sub d} with increasing Sm content.

  1. Magnetic compression anastomosis for biliary obstruction: review and experience at Tokyo Medical University Hospital.

    Science.gov (United States)

    Itoi, Takao; Kasuya, Kazuhiko; Sofuni, Atsushi; Itokawa, Fumihide; Tsuchiya, Takayoshi; Kurihara, Toshio; Ikeuchi, Nobuhito; Takeuchi, Mami; Nagano, Takeshi; Iwamoto, Hitoshi; Yamanouchi, Eigoro; Shimazu, Motohide; Tsuchida, Akihiko

    2011-05-01

    Magnetic compression anastomosis (MCA) is a revolutionary, minimally invasive method of performing choledochoenterostomy or choledochocholedochostomy without using surgical techniques in patients with biliary stricture or obstruction. Herein, we describe a case series of MCA for severe biliary stricture or obstruction, which could not be treated with conventional therapies. Two patients with biliary obstruction were treated using MCA for choledochocholedochostomy and choledochoenterostomy at Tokyo Medical University Hospital and Tokyo Medical University Hachioji Medical Center. Endoscopically, a samarium-cobalt (Sm-Co) rare-earth magnet was placed at the superior site of obstruction through the percutaneous transhepatic biliary drainage route and another Sm-Co magnet was placed at the inferior site of obstruction. A comprehensive computer-aided literature search for MCA was performed up to September 2009 by using MEDLINE and EMBASE. MCA techniques enabled complete anastomosis in both cases without procedure-related complications. The MCA technique is a revolutionary method of performing choledochocholedochostomy and choledochoenterostomy interventionally in patients with biliary obstruction, for whom the conventional endoscopic procedure is not available, or in candidates who are deemed unsuitable for surgery.

  2. Redox properties and VOC oxidation activity of Cu catalysts supported on Ce₁-xSmxOδ mixed oxides.

    Science.gov (United States)

    Konsolakis, Michalis; Carabineiro, Sónia A C; Tavares, Pedro B; Figueiredo, José L

    2013-10-15

    A series of Cu catalysts supported on Ce1-xSmxOδ mixed oxides with different molar contents (x=0, 0.25, 0.5, 0.75 and 1), was prepared by wet impregnation and evaluated for volatile organic compounds (VOC) abatement, employing ethyl acetate as model molecule. An extensive characterization study was undertaken in order to correlate the morphological, structural and surface properties of catalysts with their oxidation activity. The optimum performance was obtained with Cu/CeO2 catalyst, which offers complete conversion of ethyl acetate into CO2 at temperatures as low as 260°C. The catalytic performance of Cu/Ce1-xSmxOδ was interpreted on the basis of characterization studies, showing that incorporation of samarium in ceria has a detrimental effect on the textural characteristics and reducibility of catalysts. Moreover, high Sm/Ce atomic ratios (from 1 to 3) resulted in a more reduced copper species, compared to CeO2-rich supports, suggesting the inability of these species to take part in the redox mechanism of VOC abatement. Sm/Ce surface atomic ratios are always much higher than the nominal ratios indicating an impoverishment of catalyst surface in cerium oxide, which is detrimental for VOC activity. Copyright © 2013 Elsevier B.V. All rights reserved.

  3. Preparation and Biocompatible Surface Modification of Redox Altered Cerium Oxide Nanoparticle Promising for Nanobiology and Medicine.

    Science.gov (United States)

    Nanda, Himansu Sekhar

    2016-11-03

    The biocompatible surface modification of metal oxide nanoparticles via surface functionalization technique has been used as an important tool in nanotechnology and medicine. In this report, we have prepared aqueous dispersible, trivalent metal ion (samarium)-doped cerium oxide nanoparticles (SmCNPs) as model redox altered CNPs of biological relevance. SmCNP surface modified with hydrophilic biocompatible (6-{2-[2-(2-methoxy-ethoxy)-ethoxy]-ethoxy}-hexyl) triethoxysilane (MEEETES) were prepared using ammonia-induced ethylene glycol-assisted precipitation method and were characterized using a variety of complementary characterization techniques. The chemical interaction of functional moieties with the surface of doped nanoparticle was studied using powerful (13)C cross polarization magic angle sample spinning nuclear magnetic resonance spectroscopy. The results demonstrated the production of the extremely small size MEEETES surface modified doped nanoparticles with significant reduction in aggregation compared to their unmodified state. Moreover, the functional moieties had strong chemical interaction with the surface of the doped nanoparticles. The biocompatible surface modification using MEEETES should also be extended to several other transition metal ion doped and co-doped CNPs for the production of aqueous dispersible redox altered CNPs that are promising for nanobiology and medicine.

  4. Evaluation of the immunological profile of antibody-functionalized metal-filled single-walled carbon nanocapsules for targeted radiotherapy

    Science.gov (United States)

    Perez Ruiz de Garibay, Aritz; Spinato, Cinzia; Klippstein, Rebecca; Bourgognon, Maxime; Martincic, Markus; Pach, Elzbieta; Ballesteros, Belén; Ménard-Moyon, Cécilia; Al-Jamal, Khuloud T.; Tobias, Gerard; Bianco, Alberto

    2017-02-01

    This study investigates the immune responses induced by metal-filled single-walled carbon nanotubes (SWCNT) under in vitro, ex vivo and in vivo settings. Either empty amino-functionalized CNTs [SWCNT-NH2 (1)] or samarium chloride-filled amino-functionalized CNTs with [SmCl3@SWCNT-mAb (3)] or without [SmCl3@SWCNT-NH2 (2)] Cetuximab functionalization were tested. Conjugates were added to RAW 264.7 or PBMC cells in a range of 1 μg/ml to 100 μg/ml for 24 h. Cell viability and IL-6/TNFα production were determined by flow cytometry and ELISA. Additionally, the effect of SWCNTs on the number of T lymphocytes, B lymphocytes and monocytes within the PBMC subpopulations was evaluated by immunostaining and flow cytometry. The effect on monocyte number in living mice was assessed after tail vein injection (150 μg of each conjugate per mouse) at 1, 7 and 13 days post-injection. Overall, our study showed that all the conjugates had no significant effect on cell viability of RAW 264.7 but conjugates 1 and 3 led to a slight increase in IL-6/TNFα. All the conjugates resulted in significant reduction in monocyte/macrophage cell numbers within PBMCs in a dose-dependent manner. Interestingly, monocyte depletion was not observed in vivo, suggesting their suitability for future testing in the field of targeted radiotherapy in mice.

  5. Alleviation of bone pain in prostate cancer. Effectiveness of treatment with rhenium-186 HEDP; Linderung von Knochenschmerzen bei metastasiertem Prostatakarzinom. Nutzen der Radionuklidtherapie mit Rhenium-186-HEDP

    Energy Technology Data Exchange (ETDEWEB)

    Klutmann, S.; Bohuslavizki, K.H. [Universitaetskrankenhaus Eppendorf, Hamburg (Germany). Abt. fuer Nuklearmedizin

    1999-11-04

    Pain caused by bone metastases from carcinoma of the prostate are treated in particular by non-steroidal anti-inflammatory drugs and opioid-containing analgesics. In case of painful multilocular metastases, the use of osteotropic radionuclides which selectively irradiate the bone metastases while sparing healthy surrounding tissue offers an alternative. Owing to their favorable physical properties, rhenium-189 and samarium-153 are preferentially used. The rate of side effects - for the most part transient thrombocytopenia - is low, and the response rate is roughly 70 to 80% of the patients treated. Pain relief may last for between 1 and 6 months, with the option of multiple treatments. The prognosis of the disease is, however, not affected. (orig.) [German] Das Skelettsystem ist nach der lymphatischen Metastasierung der zweithaeufigste Sitz von Metastasen beim Prostatakarzinom. Um die Lebensqualitaet dieser Patienten zu verbessern, steht die effektive Schmerzbekaempfung im Mittelpunkt der Therapie. Neben der Gabe von Analgetika ist hier die Applikation des osteotropen Radionuklids Rhenium-186 gut geeignet. (orig.)

  6. Rare earths as burnable poison for extended cycles control in electricity generation reactors; Etude des terres rares en tant que poison consommable pour le controle des cycles allonges pour les reacteurs electrogenes

    Energy Technology Data Exchange (ETDEWEB)

    Asou, M.

    1995-05-12

    The search of an optimization of the French electronuclear network operations leads to a necessary optimization of the core performances. All the economic studies performed by the utilities had shown that there is a real gain to minimize shut down periods for refueling. So, increasing the cycle length from 12 to 18 months will present a gain of shut down for a three years operation period. The theoretical burnable absorber will be a fuel admixed material bringing the required initial negative reactivity with a burn-up kinetic well suited to the fuel and allowing the lowest residual penalty as possible. The residual penalty us defined in this case by the non complete burn up of the poison, by the low of fissile material and by the accumulate of residual isotopes or nuclides. Because of the well known use of gadolinium as burnable absorber for BWR`s and PWR`s operations, the search for the best compromise to optimize all the above stress is pointed towards the rare earths. In the nuclides family, considering criteria such as cross sections, natural abundance and availability only five nuclides can play the role as burnable absorbers, namely: gadolinium, samarium, dysprosium, europium and erbium. The study presented here will show that only gadolinium and erbium will be considered to control the reactivity of the PWR`s. (author). 58 refs., 65 figs., 47 tabs.

  7. Lanthanide derivatives comprising arylhydrazones of β-diketones: cooperative E/Z isomerization and catalytic activity in nitroaldol reaction.

    Science.gov (United States)

    Mahmudov, Kamran T; Guedes da Silva, M Fátima C; Sutradhar, Manas; Kopylovich, Maximilian N; Huseynov, Fatali E; Shamilov, Nazim T; Voronina, Anna A; Buslaeva, Tatyana M; Pombeiro, Armando J L

    2015-03-28

    Two complexes [KLa(HL(1))2{(CH3)2NCHO}2(H2O)3] (1) and [Sm(H2O)9](E-H2L(2))3·2H2O (2) were synthesized by the reaction of lanthanum(III) and samarium(III) nitrates with potassium 3-(2-(2,4-dioxopentan-3-ylidene)hydrazinyl)-2-hydroxy-5-nitrobenzenesulfonate (KH2L(1)) and potassium (E,Z)-5-chloro-3-(2-(1,3-dioxo-1-phenylbutan-2-ylidene)hydrazinyl)-2-hydroxybenzenesulfonate (KH2L(2)), respectively. Both complexes were fully characterized by elemental analysis, IR, (1)H and (13)C NMR spectroscopy, ESI-MS and single-crystal X-ray diffraction. Cooperative E,Z→E isomerization of KH2L(2), induced by resonance assisted hydrogen bonding and ionic interactions, occurs upon the interaction with Sm(III). Catalytic activities of KH2L(1,2) and their lanthanide derivatives were evaluated in the Henry reaction of nitroethane with a variety of aromatic and aliphatic aldehydes. Good yields (up to 91%) and diastereoselectivities (syn/anti 3 : 1) were observed in the reactions catalyzed by 1 in water.

  8. Rare earth elements and hypertension risk among housewives: A pilot study in Shanxi Province, China.

    Science.gov (United States)

    Wang, Bin; Yan, Lailai; Huo, Wenhua; Lu, Qun; Cheng, Zixi; Zhang, Jingxu; Li, Zhiwen

    2017-01-01

    Studies have shown that residents living near rare earth mining areas have high concentrations of rare earth elements (REEs) in their hair. However, the adverse effects of REEs on human health have rarely been the focus of epidemiological studies. The goal of this study was to evaluate the relationship between REEs in hair and the risk of hypertension in housewives. We recruited 398 housewives in Shanxi Province, China, consisting of 163 women with hypertension (cases) and 235 healthy women without hypertension (controls). We analyzed 15 REEs (lanthanum (La), samarium (Sm), europium (Eu), gadolinium (Gd), terbium (Tb), dysprosium (Dy), holmium (Ho), erbium (Er), thulium (Tm), ytterbium (Yb), lutetium (Lu), Yttrium (Y), cerium (Ce), praseodymium (Pr), and neodymium (Nd)) and calcium (Ca) accumulated in housewives hair over a period of two years. The results revealed that, with the exception of Eu, concentrations of the REEs in hair were higher in the cases than in the controls. The univariate odds ratios (ORs) of the 14 REEs were >1, and four of the REEs (Dy, Tm, Yb, and Y) also had adjusted ORs > 1. The increasing dose-response trends of the four REEs further indicated the potential for increased hypertension risk. Moreover, the REEs were negatively correlated with Ca content in hair. These results might suggest an antagonistic effect of REEs on Ca in the human body. It was concluded that high intake of REEs might increase the risk of hypertension among housewives. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Physical and electrical properties of thermal oxidized Sm{sub 2}O{sub 3} gate oxide thin film on Si substrate: Influence of oxidation durations

    Energy Technology Data Exchange (ETDEWEB)

    Goh, Kian Heng; Haseeb, A.S.M.A.; Wong, Yew Hoong, E-mail: yhwong@um.edu.my

    2016-05-01

    Growth of 150 nm Sm{sub 2}O{sub 3} films by sputtered pure samarium metal film on silicon substrates and followed by thermal oxidation process in oxygen ambient at 700 °C through various oxidation durations (5 min, 10 min, 15 min and 20 min) has been carried out. The crystallinity of Sm{sub 2}O{sub 3} film and existence of interfacial layer have been evaluated by X-ray diffraction, Fourier transform infrared and Raman analysis. Crystallite size and microstrain of Sm{sub 2}O{sub 3} were estimated by Williamson–Hall plot analysis. Calculated crystallite size of Sm{sub 2}O{sub 3} from Scherrer equation has similar trend with the value from Williamson–Hall plot. The presence of interfacial layer is supported by composition line scan by energy dispersive X-ray spectroscopy analysis. The surface roughness and surface topography of Sm{sub 2}O{sub 3} film were examined by atomic force microscopy analysis. The electrical characterization revealed that 15 min of oxidation durations with smoothest surface has highest breakdown voltage, lowest leakage current density and highest barrier height value. - Highlights: • Thermal oxidation of sputtered pure metallic Sm in oxygen ambient • Formation of polycrystalline Sm{sub 2}O{sub 3} and semi-polycrystalline interfacial layers • Optimization of oxidation duration of pure metallic Sm in oxygen ambient • Enhanced electrical performance with smooth surface and increased barrier height.

  10. Structure and phase transformation in the giant-magnetostriction Laves-phase SmFe2

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xiaonan; Lin, Kun; Gao, Qilong; Zhu, He; Li, Qiang; Cao, Yili; Chen, Jun; Ren, Yang; Huang, Rongjin; Lapidus, Saul H.; Xing, Xianran

    2018-01-15

    As one class of the most important intermetallic compounds, the binary Laves-phase is well-known for their abundant magnetic properties. Samarium-iron alloy system, SmFe2, is a prototypical Laves compound that shows strong negative magnetostriction but relatively weak magnetocrystalline anisotropy. SmFe2 has been identified as a cubic Fd3̅m structure at room temperature, however, the cubic symmetry does not match the spontaneous magnetization along the [111]cubic direction. Here we studied the crystal structure of SmFe2 by high-resolution synchrotron X-ray powder diffraction and X-ray total scattering methods. SmFe2 is found to adopt a centrosymmetric trigonal R3̅m structure at room temperature, which transforms to an orthorhombic Imma structure at 200 K. This transition is in agreement with the changes of easy magnetization direction from [111]cubic to [110]cubic direction, and is further evidenced by the inflexion of thermal expansion behavior, the sharp decline of the magnetic susceptibility in the FC-ZFC curve, and the anomaly in the specific heat capacity measurement. The revised structure and phase transformation of SmFe2 could be useful to understand the magnetostriction and related physical properties of other RM2-type pseudo-cubic Laves-phase intermetallic compounds.

  11. Magnetic and Magnetoelectric Properties of Rare Earth Molybdates

    Directory of Open Access Journals (Sweden)

    B. K. Ponomarev

    2012-01-01

    Full Text Available We present results on ferroelectric, magnetic, magneto-optical properties and magnetoelectric effect of rare earth molybdates (gadolinium molybdate, GMO, and terbium molybdate, TMO, and samarium molybdate, SMO, belonging to a new type of ferroelectrics predicted by Levanyuk and Sannikov. While cooling the tetragonal β-phase becomes unstable with respect to two degenerate modes of lattice vibrations. The β-β′ transition is induced by this instability. The spontaneous polarization appears as a by-product of the lattice transformation. The electric order in TMO is of antiferroelectric type. Ferroelectric and ferroelastic GMO and TMO at room temperature are paramagnets. At low temperatures GMO and TMO are antiferromagnetic with the Neel temperatures TN=0.3 K (GMO and TN=0.45 K (TMO. TMO shows the spontaneous destruction at 40 kOe magnetic field. Temperature and field dependences of the magnetization in TMO are well described by the magnetism theory of singlets at 4.2 K ≤ T ≤ 30 K. The magnetoelectric effect in SMO, GMO and TMO, the anisotropy of magnetoelectric effect in TMO at T = (1.8–4.2 K, the Zeeman effect in TMO, the inversion of the electric polarization induced by the laser beam are discussed. The correlation between the magnetic moment of rare earth ion and the magnetoelectric effect value is predicted. The giant fluctuations of the acoustic resonance peak intensity near the Curie point are observed.

  12. The liquid biodiesel extracted from pranajiwa (Sterculia Foetida) seeds as fuel for direct biofuel-solid oxide fuel cell

    Science.gov (United States)

    Rahmawati, Fitria; Syahputra, Rahmat J. E.; Yuniastuti, Endang; Prameswari, Arum P.; Nurcahyo, I. F.

    2017-03-01

    This research applied the liquid biodiesel extracted from Pranajiwa seeds (biodiesel-p) as fuel in Intermediate Temperature-Solid Oxide Fuel Cell, IT-SOFC, with an operational temperature of 400 - 600°C. FTIR analysis of the liquid biodiesel found that the liquid consist of some functional groups. By comparing the spectrum with the commercial biosolar as produced by Pertamina, Indonesia, it is found that there are differenet peaks at a wavenumber of 3472.98; 1872.00; and 724.30 cm-1. It indicates the presence of alcoholo molecules. Composite of Samarium doped-Ceria, SDC, with sodium carbonate, NaCO3, was used as the electrolyte, and it is named as NSDC. Meanwhile, the composite of NSDC with catalyst powder of LNC, producing NSDC-L was used as a cathode and as an anode. The liquid fuel vapourized at 150 °C before come into the fuel cell, and it was reformed inside the fuel cell tube which was set up at 400, 500, and 600 °C. The measurement found that the highest Open Circuite Voltage is 0.57 volt and the power density of 1.7 mW.cm-2 at 500 °C.

  13. [N,N′-Bis(2,6-diisopropylphenylmethanimidamidato][η8-1,4-bis(trimethylsilylcyclooctatetraenyl](tetrahydrofuransamarium(III toluene monosolvate

    Directory of Open Access Journals (Sweden)

    Anja Edelmann

    2010-12-01

    Full Text Available The title compound, [Sm(C25H35N2(C14H24Si2(C4H8O]·C7H8, was prepared by treatment of anhydrous samarium trichloride with a 1:1 mixture of in situ-prepared Li(DippForm [DippFormH = N,N′-bis(2,6-diisopropylphenylmethanimidamide] and Li2(COT′′ [COT′′ = 1,4-bis(trimethylsilylcyclooctatetraenyl] in tetrahydrofuran (THF. Despite the presence of two very bulky ligands (COT′′ and DippForm, the molecule still contains one coordinated THF ligand. The overall coordination geometry around the SmIII atom resembles a three-legged piano-stool with the COT′′ ligand being η8-coordinated and the DippForm− anion acting as an N,N′-chelating ligand [Sm—N = 2.5555 (15 and 2.4699 (15 Å]. The asymmetric unit also contains a disordered molecule of toluene, the refined ratio of the two components being 0.80 (4:0.20 (4.

  14. Electronic structure in the bulk and at the surface of lanthanide materials. A detailed study with X-ray emission and inverse photoemission

    CERN Document Server

    Huebinger, F

    2000-01-01

    LaTe. With measurements of the O3-XE in the Lanthanum-Chalcogenides we could demonstrate the transfer of s-like valence electrons from the Lanthanum atom to the Chalcogen atom. Furthermore, the binding energy of the state at the Lanthanum atom was determined. The surface core-level shift is smaller by 25 % in the Chalcogenides than in La-metal. We also describe a theoretical model, which qualitatively explains the observed larger shifts of the core-level binding energy in PE than in IPE from Lanthan-Chalcogenides. This dissertation is concerned with the occupied and unoccupied electronic structure of lanthanide materials. With surface sensitive electron-excited x-ray emission spectroscopy (XES) we could experimentally determine a surface and bulk partial density of states (p-DOS) for the metals Lanthanum, Lutetium and Samarium. From calculations of the O3-XE transition probability we anticipate a three times higher probability for s-like than for d-like electrons to fill the 5p3/2-hole; this was confirmed exp...

  15. Bulk Rotational Symmetry Breaking in Kondo Insulator SmB_{6}

    Directory of Open Access Journals (Sweden)

    Z. Xiang

    2017-09-01

    Full Text Available The Kondo insulator samarium hexaboride (SmB_{6} has been intensely studied in recent years as a potential candidate of a strongly correlated topological insulator. One of the most exciting phenomena observed in SmB_{6} is the clear quantum oscillations appearing in magnetic torque at a low temperature despite the insulating behavior in resistance. These quantum oscillations show multiple frequencies and varied effective masses. The origin of quantum oscillation is, however, still under debate with evidence of both two-dimensional Fermi surfaces and three-dimensional Fermi surfaces. Here, we carry out angle-resolved torque magnetometry measurements in a magnetic field up to 45 T and a temperature range down to 40 mK. With the magnetic field rotated in the (010 plane, the quantum oscillation frequency of the strongest oscillation branch shows a fourfold rotational symmetry. However, in the angular dependence of the amplitude of the same branch, this fourfold symmetry is broken and, instead, a twofold symmetry shows up, which is consistent with the prediction of a two-dimensional Lifshitz-Kosevich model. No deviation of Lifshitz-Kosevich behavior is observed down to 40 mK. Our results suggest the existence of multiple light-mass surface states in SmB_{6}, with their mobility significantly depending on the surface disorder level.

  16. (18)O(2) label mechanism of sulfur generation and characterization in properties over mesoporous Sm-based sorbents for hot coal gas desulfurization.

    Science.gov (United States)

    Liu, B S; Wan, Z Y; Wang, F; Zhan, Y P; Tian, M; Cheung, A S C

    2014-02-28

    Using a sol-gel method, SmMeOx/MCM-41 or SBA-15 (Me=Fe, Co and Zn) and corresponding unsupported sorbents were prepared. The desulfurization performance of these sorbents was evaluated over a fixed-bed reactor and the effects of reaction temperature, feed and sorbent composition on desulfurization performance were studied. Samarium-based sorbents used to remove H2S from hot coal gas were reported for the first time. The results of successive sulfidation/regeneration cycles revealed that SmFeO3/SBA-15 sorbent was suitable for desulfurization of hot coal gas in the chemical industry. The formation of elemental sulfur during both sulfidation and regeneration processes depended strongly on the catalytic action of Sm2O2S species, which was confirmed for the first time via high sensitive time of flight mass spectrometer (TOF-MS) using 6%vol(18)O2/Ar regeneration gas and can reduce markedly procedural complexity. The sorbents were characterized using N2-adsorption, high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), temperature-programmed reduction of H2 (H2-TPR), thermogravimetry (TG) and time-of-flight mass spectrometry (TOF-MS) techniques. Copyright © 2014 Elsevier B.V. All rights reserved.

  17. Radium-223 in treatment of castration-resistant prostate cancer with skeletal metastases

    Directory of Open Access Journals (Sweden)

    V. B. Matveev

    2017-01-01

    Full Text Available More than 90 % of patients with metastatic castration-resistant prostate cancer (CRPC have radiologically confirmed skeletal metastases. Traditional treatment methods such as administration of painkillers, external beam therapy, bisphosphonates or denosumab, as well as injections of strontium-89 or samarium-153 radionuclides, have only palliative effect and in some cases can postpone development of skeletal complications. Alpha-emitter radium-223 dichloride (Ra-223; alpharadin previously is currently one of the known drugs with proven effectiveness in relation to increasing overall survival of patients with CRPC. Ra-223 was developed specifically for patients with CRPC and symptomatic skeletal metastases. The drug targets the areas of skeletal tissue remodeling. Ra-223 is the therapy of choice in patients with CRPC and skeletal metastases and without confirmed visceral metastases before and after docetaxel chemotherapy. Chemotherapy after treatment with Ra-223 is a possible and satisfactory tolerable treatment option. Combination of Ra-223 with abiraterone, enzalutamide, or denosumab is, apparently, effective and safe, but further studies are necessary.

  18. Methanol Adsorption and Reaction on Samaria Thin Films on Pt(111

    Directory of Open Access Journals (Sweden)

    Jin-Hao Jhang

    2015-09-01

    Full Text Available We investigated the adsorption and reaction of methanol on continuous and discontinuous films of samarium oxide (SmOx grown on Pt(111 in ultrahigh vacuum. The methanol decomposition was studied by temperature programmed desorption (TPD and infrared reflection absorption spectroscopy (IRRAS, while structural changes of the oxide surface were monitored by low-energy electron diffraction (LEED. Methanol dehydrogenates to adsorbed methoxy species on both the continuous and discontinuous SmOx films, eventually leading to the desorption of CO and H2 which desorbs at temperatures in the range 400–600 K. Small quantities of CO2 are also detected mainly on as-prepared Sm2O3 thin films, but the production of CO2 is limited during repeated TPD runs. The discontinuous film exhibits the highest reactivity compared to the continuous film and the Pt(111 substrate. The reactivity of methanol on reduced and reoxidized films was also investigated, revealing how SmOx structures influence the chemical behavior. Over repeated TPD experiments, a SmOx structural/chemical equilibrium condition is found which can be approached either from oxidized or reduced films. We also observed hydrogen absence in TPD which indicates that hydrogen is stored either in SmOx films or as OH groups on the SmOx surfaces.

  19. A promising novel orange-red emitting SrZnV2O7:Sm3+ nanophosphor for phosphor-converted white LEDs with near-ultraviolet excitation

    Science.gov (United States)

    Dalal, Mandeep; Taxak, V. B.; Chahar, Sangeeta; Khatkar, Avni; Khatkar, S. P.

    2016-02-01

    A novel trivalent samarium doped SrZnV2O7 nanophosphors was developed via urea assisted solution combustion method using metal nitrates as initial raw materials. The qualitative and quantitative phase analysis was carried out using Rietveld refinement technique. It was found to crystallize in monoclinic lattice with the P121/n1 (14) space group. The photoluminescent spectral study of SrZnV2O7:Sm3+ revealed that the excitation of 405 nm yields the characteristic emission peaks at 569, 599, 640 and 702 nm due to 4G5/2→6H5/2, 4G5/2→6H7/2, 4G5/2→6H9/2 and 4G5/2→6H11/2 respectively. The optimum concentration of Sm3+ ion in SrZnV2O7 for best luminescence was found to be 2 mol%. The luminescence intensity was further enhanced by incorporating compensator charge R+ (R=Li, Na, and K) into the SrZnV2O7:0.02Sm3+ nanophosphor. The critical distance for non-radiative energy transfer was calculated to be 26.64 Å. Dipole-dipole (d-d) interactions were ascribed as the major factor responsible for concentration quenching arising from the over-doping of the activator ions. The results indicate that these nanophosphors are suitable candidate for PC-WLEDs using near UV excitation.

  20. Artificial ionospheric modification: The Metal Oxide Space Cloud experiment

    Science.gov (United States)

    Caton, Ronald G.; Pedersen, Todd R.; Groves, Keith M.; Hines, Jack; Cannon, Paul S.; Jackson-Booth, Natasha; Parris, Richard T.; Holmes, Jeffrey M.; Su, Yi-Jiun; Mishin, Evgeny V.; Roddy, Patrick A.; Viggiano, Albert A.; Shuman, Nicholas S.; Ard, Shaun G.; Bernhardt, Paul A.; Siefring, Carl L.; Retterer, John; Kudeki, Erhan; Reyes, Pablo M.

    2017-05-01

    Clouds of vaporized samarium (Sm) were released during sounding rocket flights from the Reagan Test Site, Kwajalein Atoll in May 2013 as part of the Metal Oxide Space Cloud (MOSC) experiment. A network of ground-based sensors observed the resulting clouds from five locations in the Republic of the Marshall Islands. Of primary interest was an examination of the extent to which a tailored radio frequency (RF) propagation environment could be generated through artificial ionospheric modification. The MOSC experiment consisted of launches near dusk on two separate evenings each releasing 6 kg of Sm vapor at altitudes near 170 km and 180 km. Localized plasma clouds were generated through a combination of photoionization and chemi-ionization (Sm + O → SmO+ + e-) processes producing signatures visible in optical sensors, incoherent scatter radar, and in high-frequency (HF) diagnostics. Here we present an overview of the experiment payloads, document the flight characteristics, and describe the experimental measurements conducted throughout the 2 week launch window. Multi-instrument analysis including incoherent scatter observations, HF soundings, RF beacon measurements, and optical data provided the opportunity for a comprehensive characterization of the physical, spectral, and plasma density composition of the artificial plasma clouds as a function of space and time. A series of companion papers submitted along with this experimental overview provide more detail on the individual elements for interested readers.

  1. X-ray emission from Au-Sm alloy target irradiated with high power sub nanosecond laser

    Science.gov (United States)

    Chaurasia, S.; Munda, D. S.; Tripathi, S.; Kumar, M.; Gupta, N. K.; Dhareshwar, L. J.; Bajaj, P. N.

    2010-02-01

    The hohlraum cavity is generally made out of gold (Au) and recently it has been shown that laser-target coupling efficiency can be increased by using cocktail or mixed targets such as gold-samarium (Au-Sm). We report here results of experiments performed on Au-Sm alloy in various spectral regions for various compositions. In these experiments, a 12 Joule/500ps Nd:glass laser has been used. It is observed that the soft x-ray emission in the spectral region 0.7 -1.56 keV is enhanced by about 40-50% by using a composition of Au:Sm:: 3:7 as compared to pure Au .However, in case of hard x-ray emission (3.2 -5 keV), there is a reduction in x-ray emission from Au-Sm target as compared to pure gold. This behaviour, that enhancement occurs in soft x-rays in the case of mixed Au-Sm targets is desirable in the ICF scheme.

  2. Interaction-driven sub-gap resonance in the topological Kondo insulator SmB6

    Science.gov (United States)

    Fuhrman, Wesley

    2015-03-01

    Samarium hexaboride (SmB6) is a strongly correlated Kondo Insulator with a non-trivial band-structure topology. I will discuss recent neutron scattering experiments and analysis that expose a 14 meV resonant mode in SmB6 and relate it to the low energy insulating band structure. Repeating outside the first Brillouin zone, the mode is coherent with a 5 d-like magnetic form factor. I will discuss how band inversion can be inferred from neutron scattering and show that a perturbative slave boson treatment of a hybridized 2 species (d/ f) band structure within an Anderson model can produce a spin exciton with the observed characteristics. This analysis provides a detailed physical picture of how the SmB6 band topology arises from strong electron interactions, and accounts for the 14 meV resonant mode as a magnetically active exciton. The work at IQM was supported by the US Department of Energy, office of Basic Energy Sciences, Division of Material Sciences and Engineering under Grant DE-FG02-08ER46544.

  3. New versatile staining reagents for biological transmission electron microscopy that substitute for uranyl acetate.

    Science.gov (United States)

    Nakakoshi, Masamichi; Nishioka, Hideo; Katayama, Eisaku

    2011-12-01

    Aqueous uranyl acetate has been extensively used as a superb staining reagent for transmission electron microscopy of biological materials. However, recent regulation of nuclear fuel material severely restricts its use even for purely scientific purposes. Since uranyl salts are hazardous due to biological toxicity and remaining radioactivity, development of safe and non-radioactive substitutes is greatly anticipated. We examined two lanthanide salts, samarium triacetate and gadolinium triacetate, and found that 1-10% solution of these reagents was safe but still possess excellent capability for staining thin sections of plastic-embedded materials of animal and plant origin. Although post-fixation with osmium tetroxide was essential for high-contrast staining, post-staining with lead citrate could be eliminated if a slow-scan CCD camera is available for observation. These lanthanide salts can also be utilized as good negative-staining reagents to study supramolecular architecture of biological macromolecules. They were not as effective as a fixative of protein assembly, reflecting the non-hazardous nature of the reagents.

  4. Tunable transport property of oxygen ion in metal oxide thin film: Impact of electrolyte orientation on conductivity.

    Science.gov (United States)

    Arunkumar, P; Ramaseshan, R; Dash, S; Babu, K Suresh

    2017-06-14

    Quest for efficient ion conducting electrolyte thin film operating at intermediate temperature (~600 °C) holds promise for the real-world utilization of solid oxide fuel cells. Here, we report the correlation between mixed as well as preferentially oriented samarium doped cerium oxide electrolyte films fabricated by varying the substrate temperatures (100, 300 and 500 °C) over anode/ quartz by electron beam physical vapor deposition. Pole figure analysis of films deposited at 300 °C demonstrated a preferential (111) orientation in out-off plane direction, while a mixed orientation was observed at 100 and 500 °C. As per extended structural zone model, the growth mechanism of film differs with surface mobility of adatom. Preferential orientation resulted in higher ionic conductivity than the films with mixed orientation, demonstrating the role of growth on electrochemical properties. The superior ionic conductivity upon preferential orientation arises from the effective reduction of anisotropic nature and grain boundary density in highly oriented thin films in out-of-plane direction, which facilitates the hopping of oxygen ion at a lower activation energy. This unique feature of growing an oriented electrolyte over the anode material opens a new approach to solving the grain boundary limitation and makes it as a promising solution for efficient power generation.

  5. Preparation of the Nanostructured Radioisotope Metallic Oxide by Neutron Irradiation for Use as Radiotracers

    Directory of Open Access Journals (Sweden)

    Sang-Ei Seo

    2017-10-01

    Full Text Available Metallic oxides manganese dioxide (MnO2, samarium oxide (Sm2O3, and dysprosium oxide (Dy2O3 with nanorod-like structures were synthesized by the hydrothermal synthesis method, respectively. Subsequently, the nanostructured radioisotopes MnO2 with Mn-56, Sm2O3 with Sm-153, and Dy2O3 with Dy-165 were prepared by neutron irradiation from the HANARO research reactor, respectively. The three different elements, Mn, Sm, and Dy, were selected as radiotracers because these elements can be easily gamma-activated from neutrons (activation limits: 1 picogram (Dy, 1–10 picogram (Mn, 10–100 picogram (Sm. Furthermore, the synthesized radioisotopes can be used as radiotracers in Prompt Gamma Neutron Activation Analysis as the rare earth metals Dy and Sm were not present in the Korean environment. The successful synthesis of the radioisotope metallic oxides was confirmed by Transmission Electron Microscopy (TEM, Energy Dispersive X-ray Spectrometry (EDS, X-ray Diffraction (XRD analysis, and gamma spectroscopy analysis. The synthesized nanostructured radioisotope metallic oxides may be used as radiotracers in scientific, environmental, engineering, and industrial fields.

  6. Radiosensitization of murine normoblasts in vivo by bromodeoxyuridine to the genotoxicity and cytotoxicity of the bone-seeking radiopharmaceutical 153Sm-EDTMP.

    Science.gov (United States)

    Morales-Avila, E; Ferro-Flores, G; Vallarino-Kelly, T; Morales-Ramírez, P

    2010-03-01

    Abstract To establish a basis for a possible strategy for bone marrow ablation or therapy, we examined the effect of bromodeoxyuridine (BrdU) incorporation into DNA on the genotoxic and cytotoxic effects of samarium-153 ethylenediaminetetramethylene phosphonate ((153)Sm-EDTMP) in normoblasts in vivo. Cytotoxicity and genotoxicity were established by time-response curves of polychromatic erythrocyte (PCE) and micronucleated polychromatic erythrocyte (MN-PCE) frequencies, respectively, in mouse peripheral blood samples. The group treated with (153)Sm-EDTMP showed a clear induction of MN-PCEs; however, the group treated with BrdU plus (153)Sm-EDTMP paradoxically showed only a slight increase with respect to untreated controls. Treatment with (53)Sm-EDTMP caused a small reduction in PCE frequency, but exposure to BrdU or to BrdU plus (53)Sm-EDTMP reduced the PCE frequency significantly from 32 h to the end of the experiment. The PCE frequencies in the BrdU plus (53)Sm-EDTMP group were significantly lower than in the BrdU control group at the final time and were much lower than the group treated with only (53)Sm-EDTMP, which returned to basal values. The results suggest the radioinduction of a lethal lesion in BrdU-substituted DNA that cannot be repaired easily and does not permit cell division and micronucleus formation.

  7. Sol-gel-derived hybrid materials multi-doped with rare-earth metal ions

    Science.gov (United States)

    Zelazowska, E.; Rysiakiewicz-Pasek, E.; Borczuch-Laczka, M.; Cholewa-Kowalska, K.

    2012-06-01

    Four different hybrid organic-inorganic materials based on TiO2-SiO2 matrices with organic additives and doped with rare-earth metal ions (III) from the group of europium, cerium, terbium, neodymium, dysprosium and samarium, were synthesized by sol-gel method. Tetraethyl orthosilicate, titanium (IV) isopropoxide and organic compounds, such as butyl acrylate, butyl methacrylate, ethyl acetoacetate, ethylene glycol dimethacrylate, ethyl acetate, propylene carbonate, organic solvents and certain inorganic salts were used in the synthesis. The inorganic part of the sols, which were used in the synthesis of all the hybrid materials, was prepared separately and then the organic parts were added. The materials obtained were aged for three weeks at room temperature and then heated in an electric oven for three hours at temperatures of 80 °C-150 °C. Scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (SEM/EDX); X-ray diffraction (XRD); Fourier transform infrared spectroscopy (KBr technique); 29Si magic-angle spinning nuclear magnetic resonance; and fluorescence spectroscopy were used for the examination of morphology, microstructure and luminescence properties, respectively. Photoluminescence properties with relatively intense narrow emission lines of Tb, Eu, Dy, Nd, Sm respectively to the RE-ions doping, were observed for all the hybrid materials.

  8. The application of neutron activation analysis, scanning electron microscope, and radiographic imaging for the characterization of electrochemically deposited layers of lanthanide and actinide elements

    Science.gov (United States)

    Liebe, D.; Eberhardt, K.; Hartmann, W.; Häger, T.; Hübner, A.; Kratz, J. V.; Kindler, B.; Lommel, B.; Thörle, P.; Schädel, M.; Steiner, J.

    2008-06-01

    Lanthanide and actinide targets are prepared at the University of Mainz by molecular plating, an electrochemical deposition from an organic solvent, for heavy-ion reaction studies at GSI. To acquire information about deposition yield, target thickness, and target homogeneity, the following analysis methods are applied. With neutron activation analysis (NAA) the deposition yield and the average thickness of the deposited material is determined. We report on the analytical procedure of NAA performed subsequent to the molecular plating process. Scanning electron microscope (SEM) is used to determine the morphology of the target surfaces. In combination with energy dispersive X-ray spectrometer (EDS), we also could obtain qualitative information about the chemical form of the deposited material. So far, gadolinium, samarium, holmium, and uranium targets have been investigated with SEM/EDS. With radiographic imaging (RI), targets of uranium prepared by molecular plating and by vacuum vaporization are investigated. This method is suitable to obtain information about the spatial distribution, the homogeneity, and the thickness of the target layer deposition.

  9. Phase identification and structure investigation of novel quaternary rare-earth substituted titanates

    Energy Technology Data Exchange (ETDEWEB)

    Aldridge, James D.; Womick, Jordan M.; Rosmus, Kimberly A.; Weiland, Ashley; Aitken, Jennifer A.; Polvani, Deborah A.

    2017-12-01

    Novel quaternary lanthanide-substituted oxides of stoichiometry LnxY2-xTi2O7 (where Ln is lanthanum, neodymium, samarium, gadolinium, or ytterbium) were prepared by traditional high-temperature, solid-state techniques and characterized by X-ray powder diffraction. Samples with nominal values of x up to 1.0 were attempted. The well-studied ternary cubic pyrochlore compound yttrium titanium oxide (Y2Ti2O7, space group Fd-3m, Z = 8), served as a parent structural framework in which Ln3+ cations were substituted on the Y3+ site. Laboratory-grade X-ray powder diffraction data revealed pure quaternary pyrochlore phases for LnxY2-xTi2O7 with x ≤ 0.2. Pyrochlore phase purity was verified by Rietveld analysis using high-resolution synchrotron X-ray powder diffraction data when x ≤ 0.2, however, for La3+ substitution specifically, pure quaternary pyrochlore formed at x<0.1. Band gap energies on selected samples were determined using optical diffuse reflectance spectroscopy and showed that these materials can be classified as electrical insulators with indirect band gap energies around 3.7 eV.

  10. Preparation and Biocompatible Surface Modification of Redox Altered Cerium Oxide Nanoparticle Promising for Nanobiology and Medicine

    Directory of Open Access Journals (Sweden)

    Himansu Sekhar Nanda

    2016-11-01

    Full Text Available The biocompatible surface modification of metal oxide nanoparticles via surface functionalization technique has been used as an important tool in nanotechnology and medicine. In this report, we have prepared aqueous dispersible, trivalent metal ion (samarium-doped cerium oxide nanoparticles (SmCNPs as model redox altered CNPs of biological relevance. SmCNP surface modified with hydrophilic biocompatible (6-{2-[2-(2-methoxy-ethoxy-ethoxy]-ethoxy}-hexyl triethoxysilane (MEEETES were prepared using ammonia-induced ethylene glycol-assisted precipitation method and were characterized using a variety of complementary characterization techniques. The chemical interaction of functional moieties with the surface of doped nanoparticle was studied using powerful 13C cross polarization magic angle sample spinning nuclear magnetic resonance spectroscopy. The results demonstrated the production of the extremely small size MEEETES surface modified doped nanoparticles with significant reduction in aggregation compared to their unmodified state. Moreover, the functional moieties had strong chemical interaction with the surface of the doped nanoparticles. The biocompatible surface modification using MEEETES should also be extended to several other transition metal ion doped and co-doped CNPs for the production of aqueous dispersible redox altered CNPs that are promising for nanobiology and medicine.

  11. Electrical conductivity and capacitance spectra of Bi1.37Sm0.13Zn0.92Nb1.50O6.92 pyrochlore ceramic in the range of 0-3 GHz

    Science.gov (United States)

    Qasrawi, A. F.; Bzour, Faten M.; Nazzal, Eman O.; Mergen, A.

    2014-02-01

    In this work, the electrical properties of samarium-doped bismuth niobium zinc oxide (Sm-doped BZN) pyrochlore ceramics are investigated by means of temperature dependent electrical conductivity and capacitance spectroscopy in the frequency range of 0-3 GHz. It was observed that the novel dielectric Sm-BZN ceramic exhibits a temperature and electric field dependent dielectric breakdown. When measured at 300 K, the breakdown electric field is 1.12 kV/cm and when heated the breakdown temperature is 420 K. The pyrochlore is thermally active above 440 K with conductivity activation energy of 1.37 eV. In addition, the room temperature capacitance spectra reflected a resonance-antiresonance switching property at 53 MHz when subjected to an AC signal of low power of 5 dBm. Furthermore, when the Sm-BZN ceramics are used as microwave cavity and tested in the frequency range of 1.0-3.0 GHz, the cavity behaves as low pass filter with wide tunability up to a frequency of 1.91 GHz. At this frequency it behaves as a band rejection filter that blocks waves of 1.91 GHz and 2.57 GHz frequencies. These properties of the Sm-doped BZN are promising as they indicate the usability of the ceramics in digital electronic circuits as resonant microwave cavities suitable for the production of low pass/rejection band filters.

  12. Luminescent GdVO{sub 4}:Sm{sup 3+} quantum dots enhance power conversion efficiency of bulk heterojunction polymer solar cells by Förster resonance energy transfer

    Energy Technology Data Exchange (ETDEWEB)

    Bishnoi, Swati [CSIR-Network of Institutes for Solar Energy, New Delhi 110001 (India); Luminescent Materials and Devices Group, CSIR-National Physical Laboratory, New Delhi 110012 (India); Academy of Scientific and Innovative Research (AcSIR), CSIR-National Physical Laboratory, Dr. K. S. Krishnan Marg, New Delhi 110012 (India); Gupta, Vinay, E-mail: drvinaygupta@netscape.net; Sharma, Gauri D.; Chand, Suresh [CSIR-Network of Institutes for Solar Energy, New Delhi 110001 (India); Organic and Hybrid Solar Cells Group, Physics of Energy Harvesting Division, CSIR-National Physical Laboratory, New Delhi 110012 (India); Sharma, Chhavi; Kumar, Mahesh [Ultrafast Optoelectronics and Terahertz Photonics Lab, Physics of Energy Harvesting Division, CSIR-National Physical Laboratory, New Delhi 110012 (India); Haranath, D. [CSIR-Network of Institutes for Solar Energy, New Delhi 110001 (India); Luminescent Materials and Devices Group, CSIR-National Physical Laboratory, New Delhi 110012 (India); Naqvi, Sheerin [Luminescent Materials and Devices Group, CSIR-National Physical Laboratory, New Delhi 110012 (India)

    2016-07-11

    In this work, we report enhanced power conversion efficiency (PCE) of bulk heterojunction polymer solar cells by Förster resonance energy transfer (FRET) from samarium-doped luminescent gadolinium orthovanadate (GdVO{sub 4}:Sm{sup 3+}) quantum dots (QDs) to polythieno[3,4-b]-thiophene-co-benzodithiophene (PTB7) polymer. The photoluminescence emission spectrum of GdVO{sub 4}:Sm{sup 3+} QDs overlaps with the absorption spectrum of PTB7, leading to FRET from GdVO{sub 4}:Sm{sup 3+} to PTB7, and significant enhancements in the charge-carrier density of excited and polaronic states of PTB7 are observed. This was confirmed by means of femtosecond transient absorption spectroscopy. The FRET from GdVO{sub 4}:Sm{sup 3+} QDs to PTB7 led to a remarkable increase in the power conversion efficiency (PCE) of PTB7:GdVO{sub 4}:Sm{sup 3+}:PC{sub 71}BM ([6,6]-phenyl-C{sub 71}-butyric acid methyl ester) polymer solar cells. The PCE in optimized ternary blend PTB7:GdVO{sub 4}:Sm{sup 3+}:PC{sub 71}BM (1:0.1:1.5) is increased to 8.8% from 7.2% in PTB7:PC{sub 71}BM. This work demonstrates the potential of rare-earth based luminescent QDs in enhancing the PCE of polymer solar cells.

  13. Ageing of a phosphate ceramic used to immobilize chloride contaminated actinide waste

    Energy Technology Data Exchange (ETDEWEB)

    Metcalfe, Brian L.; Donald, Ian W.; Fong, Shirley K.; Gerrard, Lee A.; Strachan, Denis M.; Scheele, Randall D.

    2009-03-31

    AWE has developed a process for the immobilization of ILW waste containing a significant quantity of chloride using Ca3(PO4)2 as the host material. Waste ions are incorporated into two phosphate based phases, chlorapatite, Ca5(PO4)3Cl, and spodiosite, Ca2(PO4)Cl. Non-active trials performed at AWE using samarium as the actinide surrogate demonstrated the durability of these phases in aqueous solution. Trials of the process using actinide-doped material were performed at PNNL which confirmed the immobilized wasteform resistant to aqueous leaching. Initial leach trials conducted on 239Pu /241Am loaded ceramic at 40°C/28 days gave normalized mass losses of 1.2 x 10-5 g.m-2 and 2.7 x 10-3 g.m-2 for Pu and Cl respectively. In order to assess the response of the phases to radiation-induced damage, accelerated ageing trials were performed on samples in which the 239Pu was replaced by 238Pu. No changes to the crystalline structure of the waste were detected using XRD after the samples had experienced a radiation dose of 4 x 1018 α.g-1. Leach trials showed that there had been an increase in the P and Ca release rates but no change in the Pu release rate.

  14. Radium-223 in metastatic castration resistant prostate cancer.

    Science.gov (United States)

    Vuong, Winston; Sartor, Oliver; Pal, Sumanta K

    2014-01-01

    In 2004, docetaxel was approved for the treatment of metastatic castration-resistant prostate cancer (mCRPC). For the next several years, there was a lull in drug approvals. However, from 2010 onwards, 5 additional therapies have been approved on the basis of showing a survival benefit in phase III studies. These agents include sipuleucel-T, cabazitaxel, abiraterone, enzalutamide and (most recently) radium-223. Amongst radiopharmaceuticals currently used for advanced prostate cancer (e.g. samarium-153 and strontium-89), radium-223 possesses several unique properties. As an alpha-emitting compound, the agent produces a high-energy output over a short range, facilitating selective destruction of tissue within the bone in the region of osteoblastic lesions while sparing surrounding normal tissue. The current review will outline biological rationale for radium-223 and also provide an overview of preclinical and clinical development of the agent. Rational sequencing of radium-223 and combinations, in the increasingly complex landscape of mCRPC will be discussed, along with factors influencing clinical implementation.

  15. Synthesis, spectroscopic characterization, solid state d.c. electrical conductivity and biological studies of some lanthanide(III chloride complexes with a heterocyclic Schiff base ligand

    Directory of Open Access Journals (Sweden)

    K. Mohanan

    2016-07-01

    Full Text Available Condensation of 2-hydroxy-1-naphthaldehyde with 2-amino-3-carboxyethyl-4,5-dimethylthiophene in 1:1 molar ratio, yielded a potentially tridentate Schiff base viz. 2-[N-(2′-hydroxy-1-naphthylideneamino]-3-carboxyethyl-4,5-dimethylthiophene (HNAT. This ligand formed complexes with lanthanum(III, cerium(III, praseodymium(III, neodymium(III, samarium(III, europium(III and gadolinium(III chloride under well defined conditions. These complexes were characterized through elemental analysis, molar conductance, magnetic moment measurements, IR, UV–Vis, FAB mass and 1H NMR spectral studies. Analytical data showed that all the metal complexes exhibited 1:1 metal–ligand ratio. Molar conductance values adequately confirmed the non-electrolytic nature of the metal complexes. The proton NMR spectral observations supplement the IR spectral assignments. The spectral data revealed that the ligand acted as neutral tridentate, coordinating to the metal ion through azomethine nitrogen, ester carbonyl and naphtholate oxygen without deprotonation. The ligand and its lanthanum(III chloride complex were subjected to XRD studies. The lanthanum(III chloride complex has undergone a facile transesterification reaction. The solid state d.c. electrical conductivity of some selected complexes were measured as a function of temperature, indicating the semiconducting nature of the metal complexes. The antimicrobial activities were examined by disk diffusion method against some pathogenic bacterial and fungal species.

  16. Synthesis of a new complex borate KBaSm(BO32

    Directory of Open Access Journals (Sweden)

    Asset Bolatov

    2016-03-01

    Full Text Available A novel compound containing three cation alkali, alkali earth, rare earth orthoborate KBaSm(BO32 was synthesized by using two-step solid-state method. Results of powder X-ray diffraction analysis (XRD and FTIR spectroscopy showed that this compound is isostructural with known compounds KBaY(BO32 [1] and KBaTbB2O6 [2] and refers to trigonal crystal system (RǮm space group with unit cell parameters of crystalline lattice а=5,4845(10 Å, с=18,135(13, Z=3. KBaSm(BO32 was obtained at a temperature of 825°C from initial reactants: samarium (III oxide, barium and potassium carbonates and boric acid. Among KBaSm(BO32 – KBaTb(BO32 – KBaY (BO32 observed a regular linear variation of unit cell parameters, as well as regular shift of the bands in the IR spectra, depending on the size of the rare earth cation.

  17. Adjustable Permanent Quadrupoles Using Rotating Magnet Material Rods for the Next Linear Collider.

    CERN Document Server

    Spencer, C M

    2002-01-01

    The proposed Next Linear Collider (NLC) will require over 1400 adjustable quadrupoles between the main linacs' accelerator structures. These 12.7 mm bore quadrupoles will have a range of integrated strength from 0.6 to 132 Tesla, with a maximum gradient of 135 Tesla per meter, an adjustment range of +0 -20% and effective lengths from 324 mm to 972 mm. The magnetic center must remain stable to within 1 micrometer during the 20% adjustment. In an effort to reduce estimated costs and increase reliability, several designs using hybrid permanent magnets have been developed. All magnets have iron poles and use either Samarium Cobalt or Neodymium Iron to provide the magnetic fields. Two prototypes use rotating rods containing permanent magnetic material to vary the gradient. Gradient changes of 20% and center shifts of less than 20 microns have been measured. These data are compared to an equivalent electromagnet prototype. See High Reliability Prototype Quadrupole for the Next Linear Collider by C.E Rago, C.M SPENC...

  18. Activation cross-sections of deuteron induced reactions on {sup nat}Sm up to 50 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Tárkányi, F. [Institute for Nuclear Research, Hungarian Academy of Sciences (ATOMKI), 4026 Debrecen (Hungary); Hermanne, A. [Cyclotron Laboratory, Vrije Universiteit Brussel (VUB), Laarbeeklaan 103, 1090 Brussels (Belgium); Takács, S. [Institute for Nuclear Research, Hungarian Academy of Sciences (ATOMKI), 4026 Debrecen (Hungary); Ditrói, F., E-mail: ditroi@atomki.hu [Institute for Nuclear Research, Hungarian Academy of Sciences (ATOMKI), 4026 Debrecen (Hungary); Csikai, J. [Institute for Nuclear Research, Hungarian Academy of Sciences (ATOMKI), 4026 Debrecen (Hungary); Ignatyuk, A.V. [Institute of Physics and Power Engineering (IPPE), Obninsk 249020 (Russian Federation)

    2014-08-15

    Highlights: •Deuteron induced reactions on natural samarium up to 50 MeV. •Stacked foil irradiation at different energies and accelerators. •Comparison of experimental results with the ALICE-D, EMPIRE-D and TALYS theoretical codes. •Calculation and comparison of thick target integral yields. -- Abstract: Activation cross-sections for deuteron induced reactions on Sm are presented for the first time for {sup nat}Sm(d,xn){sup 155,154,152m2,152m1,152g,150m,150g,149,148,147,146}Eu, {sup nat}Sm(d,x) {sup 153,145}Sm and {sup nat}Sm(d,x){sup 151,150,149,145,144,143}Pm up to 50 MeV. The cross-sections were measured by the stacked-foil irradiation technique and high resolution γ-ray spectrometry. The results were compared with results of nuclear reaction codes ALICE-D, EMPIRE-D and TALYS (from TENDL libraries). Integral yields of the products were calculated from the excitation functions.

  19. Activation cross-sections of proton induced reactions on {sup nat}Sm up to 65 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Tárkányi, F. [Institute for Nuclear Research, Hungarian Academy of Sciences (ATOMKI), 4026 Debrecen (Hungary); Hermanne, A. [Cyclotron Laboratory, Vrije Universiteit Brussel (VUB), Laarbeeklaan 103, 1090 Brussels (Belgium); Takács, S. [Institute for Nuclear Research, Hungarian Academy of Sciences (ATOMKI), 4026 Debrecen (Hungary); Ditrói, F., E-mail: ditroi@atomki.hu [Institute for Nuclear Research, Hungarian Academy of Sciences (ATOMKI), 4026 Debrecen (Hungary); Ignatyuk, A.V. [Institute of Physics and Power Engineering (IPPE), Obninsk 249020 (Russian Federation)

    2015-03-01

    Highlights: •Proton induced reactions on natural samarium up to 65 MeV. •Stacked foil irradiation technique. •Comparison of experimental results with the ALICE, EMPIRE and TALYS theoretical model codes. •Calculation and comparison of thick target integral yields. -- Abstract: Activation cross sections for proton induced reactions on Sm are presented for the first time for {sup nat}Sm(p,xn){sup 154,152m2,152m1,152g,150m,150g,149,148,147,146,145}Eu, {sup nat}Sm(p,x){sup 153,145}Sm, {sup nat}Sm(p,x){sup 151,150,149,148g,148m,146,144,143}Pm and {sup nat}Sm(p,x){sup 141}Nd up to 65 MeV. The cross sections were measured via activation method by using a stacked-foil irradiation technique and high resolution gamma ray spectroscopy. The results were compared with results of the nuclear reaction codes ALICE, EMPIRE and TALYS (results taken from TENDL libraries). Integral yields of the activation products were calculated from the excitation functions.

  20. Measurement of large angle Rayleigh scattering cross sections for 39.5, 40.1 and 45.4keV photons in elements with 26 ≤ Z ≤ 83.

    Science.gov (United States)

    Upmanyu, Arun; Singh, Gurjot; Duggal, Heena; Kainth, H S; Bhalla, Atul; Kumar, Sanjeev

    2017-10-01

    The present work reports Rayleigh scattering cross section measurements for the 39.5keV (Sm- Kα 2 ), 40.1keV (Sm-Kα 1 ) and 45.4keV (Sm-Kβ 1,3 ) X-ray photons in 35 elements with 26 ≤ Z ≤ 83 at backward angle of 139°. The scattering measurements were performed in reflection mode geometrical set up involving a secondary photon source consisting of Samarium ( 62 Sm) target excited by the 59.54keV γ-rays from the 241 Am radioactive source. The scattered photons were detected using a low energy germanium (LEGe) detector. The product of detector efficiency, intensity of incident photons and other geometrical factors were determined by measuring the K X-ray yields from targets with 47 ≤ Z ≤ 59 and knowledge of the respective K X-ray fluorescence cross sections. The measured cross sections are compared with the theoretical cross sections based on the modified form factor (MF) formalisms and the second-order S-matrix approach. The experimental results demonstrate large deviations from the MF values for the elements with K shell binding energy (B K ) in vicinity of the incident photon energy (E in ), which smooth out with inclusion of the anomalous scattering factors (ASFs). The S-matrix values, in general, agree with the measured cross sections for all the elements under investigation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Dynamic modeling of brushless dc motors for aerospace actuation

    Science.gov (United States)

    Demerdash, N. A.; Nehl, T. W.

    1980-01-01

    A discrete time model for simulation of the dynamics of samarium cobalt-type permanent magnet brushless dc machines is presented. The simulation model includes modeling of the interaction between these machines and their attached power conditioners. These are transistorized conditioner units. This model is part of an overall discrete-time analysis of the dynamic performance of electromechanical actuators, which was conducted as part of prototype development of such actuators studied and built for NASA-Johnson Space Center as a prospective alternative to hydraulic actuators presently used in shuttle orbiter applications. The resulting numerical simulations of the various machine and power conditioner current and voltage waveforms gave excellent correlation to the actual waveforms collected from actual hardware experimental testing. These results, numerical and experimental, are presented here for machine motoring, regeneration and dynamic braking modes. Application of the resulting model to the determination of machine current and torque profiles during closed-loop actuator operation were also analyzed and the results are given here. These results are given in light of an overall view of the actuator system components. The applicability of this method of analysis to design optimization and trouble-shooting in such prototype development is also discussed in light of the results at hand.

  2. Uptake of 153Sm-EDTMP in normal, benign and malignant tumor tissue

    CERN Document Server

    Riegel, A

    2001-01-01

    The present study was designed to investigate and compare the uptake of 153Sm-EDTMP (153Samarium-ethylenediaminetetramethylene phosphonate)and 99mTc-DPD (99mTechnetium-dicarboxypropane diphosphonate) into different soft tissue sarcoma cell lines and various tissue specimen in vitro. After 10-120 minutes of incubation at 22 sup o C and 37 sup o C with 153Sm-EDTMP, the uptake kinetics of this tracer in human soft tissue sarcoma cells SW 684 (fibrosarcoma) and SW 1353 (chondrosarcoma) were assessed. The uptake was temperature-dependent and higher into fibrosarcoma than in chondrosarconma. Normal bone tissue samples of rat and human were incubated with 153Sm-EDTMP and 99mTc-DPD. The uptake of 99mTc-DPD was higher than that of 153Sm-EDTMP. Various benign and malignant bone and soft tissue tumors and metastases of different primaries were treated in the same way. The uptake was generally very low, in the metastatic tissue specimen in part possibly due to their osteolytic character.

  3. Thermal Characterization of Molten Salt Systems

    Energy Technology Data Exchange (ETDEWEB)

    Toni Y. Gutknecht; Guy L. Fredrickson

    2011-09-01

    The phase stability of molten salts in an electrorefiner (ER) may be adversely affected by the buildup of sodium, fission products, and transuranics in the electrolyte. Potential situations that need to be avoided are the following: (1) salt freezing due to an unexpected change in the liquidus temperature, (2) phase separation or non-homogeneity of the molten salt due to the precipitation of solids or formation of immiscible liquids, and (3) any mechanism that can result in the separation and concentration of fissile elements from the molten salt. Any of these situations would result in an off-normal condition outside the established safety basis for electrorefiner (ER) operations. The stability (and homogeneity) of the phases can potentially be monitored through the thermal characterization of the salts, which can be a function of impurity concentration. This report describes the experimental results of typical salts compositions, which consist of chlorides of potassium, lithium, strontium, samarium, praseodymium, lanthanum, barium, cerium, cesium, neodymium, sodium and gadolinium chlorides as a surrogate for both uranium and plutonium, used for the processing of used nuclear fuels.

  4. Reactivity effects of fission product decay in PWRs

    Energy Technology Data Exchange (ETDEWEB)

    Aragones, J.M.; Ahnert, C.

    1988-01-01

    The purpose of the work reported in this paper is to analyze the effects of fission product chains with radioactive decay on the reactivity in pressurized water reactor (PWR) cores, calculating their accumulation and absorption rates along fuel burnup at continuous operation and after shutdown periods extending from 1 day to a few months. The authors PWR version of the WIMS-D4 code is first used to obtain the individual number densities, absorption rates, and averaged cross sections for every nuclide of the fission product chains with significant decay rates, as a function of fuel burnup at continuous irradiation. Next, by an auxiliary ad hoc code, these data, have been processed together with the required one for fissile nuclides and boron, also taken from WIMS at each burnup step, to calculate the average or effective values relevant for the analysis and the decay and change in overall absorption after several shutdown times. (1) The reactivity effect of fission product decay changes significantly with the shutdown time. The maximum absorption increase by decay is reached in /approx/ 10 days' shutdown. (2) The dependence with fuel type, enrichment, and burnup is slight, but the change with previous power density is nearly linear, which might be significant after coast-down in previous cycles. (3) For long shutdown periods, the overall reactivity effect of decay in the three fission product chains considered is much less than if only the samarium peak due to /sup 149/Nd is considered.

  5. Gamma scintigraphic evaluation of floating gastroretentive tablets of metformin HCl using a combination of three natural polymers in rabbits

    Science.gov (United States)

    Razavi, Mahboubeh; Karimian, Hamed; Yeong, Chai Hong; Chung, Lip Yong; Nyamathulla, Shaik; Noordin, Mohamed Ibrahim

    2015-01-01

    The present research was aimed at formulating a metformin HCl sustained-release formulation from a combination of polymers, using the wet granulation technique. A total of 16 formulations (F1–F16) were produced using different combinations of the gel-forming polymers: tamarind kernel powder, salep (palmate tubers of Orchis morio), and xanthan. Post-compression studies showed that there were no interactions between the active drug and the polymers. Results of in vitro drug-release studies indicated that the F10 formulation which contained 5 mg of tamarind kernel powder, 33.33 mg of xanthan, and 61.67 mg of salep could sustain a 95% release in 12 hours. The results also showed that F2 had a 55% similarity factor with the commercial formulation (C-ER), and the release kinetics were explained with zero order and Higuchi models. The in vivo study was performed in New Zealand White rabbits by gamma scintigraphy; the F10 formulation was radiolabeled using samarium (III) oxide (153Sm2O3) to trace transit of the tablets in the gastrointestinal tract. The in vivo data supported the retention of F10 formulation in the gastric region for 12 hours. In conclusion, the use of a combination of polymers in this study helped to develop an optimal gastroretentive drug-delivery system with improved bioavailability, swelling, and floating characteristics. PMID:26273196

  6. Visible light emission and energy transfer processes in Sm-doped nitride films

    Science.gov (United States)

    Zanatta, A. R.

    2012-06-01

    Even though the great interest in studying the near-infrared light emission due to Er3+ ions for telecommunication purposes, efficient visible radiation can be achieved from many different rare-earth (RE) ions. In fact, visible and/or near-infrared light emission takes place in RE-doped wide bandgap semiconductors following either photon or electron excitation, suggesting their technological potential in devices such as light-emitting diodes (LED's) and flat-panel displays, for example. Taking into consideration these aspects, the present contribution reports on the investigation of AlN, BeN, GeN, and SiN thin films doped with samarium. The samples were prepared by sputtering and as a result of the deposition method and conditions they present an amorphous structure and Sm concentrations in the low 0.5 at. %. After deposition, the samples were submitted to thermal annealing treatments and investigated by different spectroscopic techniques. A detailed examination of the experimental data allowed to identify optical transitions due to Sm3+ and Sm2+ ions as well as differences in their mechanisms of photon excitation and recombination. Moreover, it is shown that the Sm-related spectral features and emission intensity are susceptible, respectively, to the atomic environment the Sm3+/Sm2+ ions experience and to the presence of non-radiative recombination centers.

  7. Synthesis and spectroscopic characterization of some lanthanide(III nitrate complexes of ethyl 2-[2-(1-acetyl-2-oxopropylazo]-4,5-dimethyl-3-thiophenecarboxyate

    Directory of Open Access Journals (Sweden)

    CHEMPAKAM JANARDHANAN ATHIRA

    2011-02-01

    Full Text Available Ethyl 2-[2-(1-acetyl-2-oxopropylazo]-4,5-dimethyl-3-thiophenecarboxyate was synthesized by coupling diazotized ethyl 2-amino-4,5-dimethylthiophene-3-carboxylate with acetylacetone. Based on various spectral studies and elemental analysis, an intramolecularly hydrogen-bonded azo-enol structural form was assigned for the ligand. This ligand is versatile in forming a series of lanthanide(III complexes, viz., lanthanum(III, cerium(III, praseodymium(III, neodymium(III, samarium(III and gadolinium(III, which were characterized through various spectral studies, elemental analysis, magnetic susceptibility measurements, molar conductance and thermal analysis. The spectral data revealed that the ligand acted as a neutral tridentate, coordinating to the metal ion through one of the azo nitrogen atoms, the ester carbonyl and the enolic oxygen of the acetylacetone moiety, without deprotonation. Molar conductance values adequately supported their non-electrolytic nature. The ligand and lanthanum(III complex were subjected to X-ray diffraction studies. In addition, the lanthanum(III complex underwent a facile transesterification reaction on refluxing with methanol for a long period. The thermal behaviour of the lanthanum(III complex was also examined

  8. Effect of surface deposited rare earth oxide gel characteristics on cyclic oxidation behavior of Fe20-Cr alloys

    Directory of Open Access Journals (Sweden)

    Stela Maria Cristina Fernandes

    2006-06-01

    Full Text Available Rare earths have been used to increase high temperature oxidation resistance of many chromium dioxide and alumina forming alloys. These rare earths can be added as elements (or as oxide dispersions to the alloys or applied as an oxide coating to the alloy surface. The sol-gel technique is considered to be very efficient to apply fine oxide particle coatings. Oxide gel coatings of various rare earths such as lanthanum, cerium, praseodymium, neodymium, samarium, gadolinium, dysprosium, yttrium, erbium and ytterbium have been applied to an iron-chromium alloy to determine their influence on the cyclic oxidation behavior (RT-900 °C of the alloy. The morphology and coverage of the rare earth oxide gels varied with the type of rare earth. The cyclic oxidation resistance of the alloy increased with increase in time at temperature required to reach a specific chromium dioxide layer thickness and this in turn was influenced by the rare earth ion radius and characteristics of the rare earth oxide coating such as morphology, stability, coverage, resistance to thermal stresses and consequently adhesion.

  9. Synthesis, Characterization, and Thermochemical Study on a Ternary Complex [Sm( m-MOBA)3phen]2

    Science.gov (United States)

    Xiao, S. X.; Gu, H. W.; Zhang, J. J.; Xiao, H.; Ding, J.; Lu, X.

    2012-02-01

    A new ternary solid complex of samarium chloride hexahydrate with m-methoxybenzoic acid and 1,10-phenanthroline, [Sm( m-MOBA)3phen]2 ( m-MOBA: m-methoxybenzoic; phen: 1,10-phenanthroline), was synthesized and characterized by elemental analysis, IR spectra, UV spectra, molar conductance, and thermogravimetric analysis. The dissolution enthalpies of SmCl3·6H2O (s), m-HMOBA(s), phen·H2O (s), and [Sm( m-MOBA)3phen]2(s) in the calorimetric solvent (VDMF:VCYC:VHCl = 2:1:2) were determined by an advanced solution-reaction isoperibol calorimeter at 298.15 K, respectively. The standard molar enthalpy of reaction was determined to be {Δ_r H_m^θ =(233.97 ± 1.15) kJ {\\cdot} mol^{-1}}. In accordance with Hess' law, the standard molar enthalpy of formation of the title complex [Sm( m-MOBA)3phen]2(s) was estimated to be -(5054.6 ± 9.5) kJ · mol-1.

  10. AVIRIS as a tool for carbonatite exploration: Comparison of SPAM and Mbandmap data analysis methods

    Science.gov (United States)

    Kingston, Marguerite J.; Crowley, James K.

    1992-01-01

    Data acquired with the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) of the Mountain Pass, San Bernadino County, California, area were analyzed to evaluate the use of narrow-band imaging data for carbonatite exploration. Carbonatites are igneous carbonate-rich rocks that are economically important in part because they are the major source for rare-earth minerals. Because the 224 AVIRIS spectral channels have a nominal spectral resolution of 10 nm, narrow absorption features such as those displayed by the rare-earth elements neodymium (Nd) and samarium (Sm) may be detected. The Mountain Pass region encompasses a well-exposed sequence of sedimentary, metamorphic, and igneous rocks, including an alkalic carbonatite intrusion. The carbonatite was emplaced in Precambrian granitic rocks that are fault bounded by a thick suite of Paleozoic, sedimentary rock, predominantly dolomite. The carbonatite stock, the major source of light rare-earth elements (REE) in the United States, affords the opportunity to test AVIRIS capabilities for detecting REE absorption features. Nd-bearing minerals display narrow, sharp and distinctive spectral features at 580, 740, 800, and 870 nm. Minerals bearing Sm display similarly sharp features near 1090, 1250, 1410, and 1550 nm. The more common REE, lanthanum and cerium, do not display absorption features in the visible/near-infrared region in their natural oxidation states.

  11. HF propagation results from the Metal Oxide Space Cloud (MOSC) experiment

    Science.gov (United States)

    Joshi, Dev; Groves, Keith M.; McNeil, William; Carrano, Charles; Caton, Ronald G.; Parris, Richard T.; Pederson, Todd R.; Cannon, Paul S.; Angling, Matthew; Jackson-Booth, Natasha

    2017-06-01

    With support from the NASA sounding rocket program, the Air Force Research Laboratory launched two sounding rockets in the Kwajalein Atoll, Marshall Islands in May 2013 known as the Metal Oxide Space Cloud experiment. The rockets released samarium metal vapor at preselected altitudes in the lower F region that ionized forming a plasma cloud. Data from Advanced Research Project Agency Long-range Tracking and Identification Radar incoherent scatter radar and high-frequency (HF) radio links have been analyzed to understand the impacts of the artificial ionization on radio wave propagation. The HF radio wave ray-tracing toolbox PHaRLAP along with ionospheric models constrained by electron density profiles measured with the ALTAIR radar have been used to successfully model the effects of the cloud on HF propagation. Up to three new propagation paths were created by the artificial plasma injections. Observations and modeling confirm that the small amounts of ionized material injected in the lower F region resulted in significant changes to the natural HF propagation environment.

  12. An investigation into force-moment calibration techniques applicable to a magnetic suspension and balance system. M.S. Thesis

    Science.gov (United States)

    Eskins, Jonathan

    1988-01-01

    The problem of determining the forces and moments acting on a wind tunnel model suspended in a Magnetic Suspension and Balance System is addressed. Two calibration methods were investigated for three types of model cores, i.e., Alnico, Samarium-Cobalt, and a superconducting solenoid. Both methods involve calibrating the currents in the electromagnetic array against known forces and moments. The first is a static calibration method using calibration weights and a system of pulleys. The other method, dynamic calibration, involves oscillating the model and using its inertia to provide calibration forces and moments. Static calibration data, found to produce the most reliable results, is presented for three degrees of freedom at 0, 15, and -10 deg angle of attack. Theoretical calculations are hampered by the inability to represent iron-cored electromagnets. Dynamic calibrations, despite being quicker and easier to perform, are not as accurate as static calibrations. Data for dynamic calibrations at 0 and 15 deg is compared with the relevant static data acquired. Distortion of oscillation traces is cited as a major source of error in dynamic calibrations.

  13. Evaluation of the attractive force of different types of new-generation magnetic attachment systems.

    Science.gov (United States)

    Akin, Hakan; Coskun, M Emre; Akin, E Gulsah; Ozdemir, A Kemal

    2011-03-01

    Rare earth magnets have been used in prosthodontics, but their tendency for corrosion in the oral cavity and insufficient attractive forces limit long-term clinical application. The purpose of this study was to evaluate the attractive force of different types of new-generation magnetic attachment systems. The attractive force of the neodymium-iron-boron (Nd-Fe-B) and samarium-cobalt (Sm-Co) magnetic attachment systems, including closed-field (Hilop and Hicorex) and open-field (Dyna and Steco) systems, was measured in a universal testing machine (n=5). The data were statistically evaluated with 1-way ANOVA and post hoc Tukey-Kramer multiple comparison test (α=.05). The closed-field systems exhibited greater (Pforce than the open-field systems. Moreover, there was a statistically significant difference in attractive force between Nd-Fe-B and Sm-Co magnets (Pforce was found with the Hilop system (9.2 N), and the lowest force was found with the Steco system (2.3 N). The new generation of Nd-Fe-B closed-field magnets, along with improved technology, provides sufficient denture retention for clinical application. Copyright © 2011 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

  14. Radium-223 in metastatic castration resistant prostate cancer

    Directory of Open Access Journals (Sweden)

    Winston Vuong

    2014-06-01

    Full Text Available In 2004, docetaxel was approved for the treatment of metastatic castration-resistant prostate cancer (mCRPC. For the next several years, there was a lull in drug approvals. However, from 2010 onwards, 5 additional therapies have been approved on the basis of showing a survival benefit in phase III studies. These agents include sipuleucel-T, cabazitaxel, abiraterone, enzalutamide and (most recently radium-223. Amongst radiopharmaceuticals currently used for advanced prostate cancer (e.g. samarium-153 and strontium-89, radium-223 possesses several unique properties. As an alpha-emitting compound, the agent produces a high-energy output over a short range, facilitating selective destruction of tissue within the bone in the region of osteoblastic lesions while sparing surrounding normal tissue. The current review will outline biological rationale for radium-223 and also provide an overview of preclinical and clinical development of the agent. Rational sequencing of radium-223 and combinations, in the increasingly complex landscape of mCRPC will be discussed, along with factors influencing clinical implementation.

  15. Luminescent GdVO4:Sm3+ quantum dots enhance power conversion efficiency of bulk heterojunction polymer solar cells by Förster resonance energy transfer

    Science.gov (United States)

    Bishnoi, Swati; Gupta, Vinay; Sharma, Chhavi; Haranath, D.; Naqvi, Sheerin; Kumar, Mahesh; Sharma, Gauri D.; Chand, Suresh

    2016-07-01

    In this work, we report enhanced power conversion efficiency (PCE) of bulk heterojunction polymer solar cells by Förster resonance energy transfer (FRET) from samarium-doped luminescent gadolinium orthovanadate (GdVO4:Sm3+) quantum dots (QDs) to polythieno[3,4-b]-thiophene-co-benzodithiophene (PTB7) polymer. The photoluminescence emission spectrum of GdVO4:Sm3+ QDs overlaps with the absorption spectrum of PTB7, leading to FRET from GdVO4:Sm3+ to PTB7, and significant enhancements in the charge-carrier density of excited and polaronic states of PTB7 are observed. This was confirmed by means of femtosecond transient absorption spectroscopy. The FRET from GdVO4:Sm3+ QDs to PTB7 led to a remarkable increase in the power conversion efficiency (PCE) of PTB7:GdVO4:Sm3+:PC71BM ([6,6]-phenyl-C71-butyric acid methyl ester) polymer solar cells. The PCE in optimized ternary blend PTB7:GdVO4:Sm3+:PC71BM (1:0.1:1.5) is increased to 8.8% from 7.2% in PTB7:PC71BM. This work demonstrates the potential of rare-earth based luminescent QDs in enhancing the PCE of polymer solar cells.

  16. Effect of sintering temperature on the microstructure and ionic conductivity of Ce0.8Sm0.1Ba0.1O2-δ electrolyte

    Directory of Open Access Journals (Sweden)

    Mustafa Anwar

    2017-03-01

    Full Text Available This study investigated the effects of sintering temperature on the microstructure and ionic conductivity of codoped ceria electrolyte with barium and samarium as dopants. The electrolyte (Ce0.8Sm0.1Ba0.1O2-δ powder was synthesized using the citric acid-nitrate combustion method and calcined at 900 °C for 5 h. The calcined electrolyte exhibited a cubic fluorite crystal structure with some impurity phases. The calcined powder was then pressed into cylindrical pellets using uniaxial die-pressing. The pellets were sintered at three different temperatures, i.e., 1200, 1300 and 1400 °C for 5 h. Microstructural analysis of the pellets showed that the average grain size increased with the increase in sintering temperature. The sintered densities of the pellets were measured by Archimedes’ method, and the relative density values were within the range of 78 %TD to 87 %TD as the sintering temperature increased from 1200 to 1400 °C. Electrochemical impedance spectroscopy analysis showed that conductivity increased with the increase in sintering temperature, but no considerable change in conductivity was observed for the pellets sintered at 1300 and 1400 °C. The results revealed that the electrolyte pellet sintered at 1300 °C exhibited the ionic conductivity of 0.005 S/cm with lowest activation energy of 0.7275 eV.

  17. Synthesis, single-crystal structure determination, and vibrational spectroscopy of the europium borate Eu[B{sub 6}O{sub 8}(OH){sub 5}].H{sub 3}BO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Ortner, Teresa S.; Wurst, Klaus; Huppertz, Hubert [Institut fuer Allgemeine, Anorganische und Theoretische Chemie, Leopold-Franzens-Universitaet Innsbruck (Austria); Seibald, Markus [OSRAM GmbH, Corporate Innovation, Schwabmuenchen (Germany); Joachim, Bastian [Institut fuer Mineralogie und Petrographie, Leopold-Franzens-Universitaet Innsbruck (Austria)

    2016-07-15

    The new europium borate Eu[B{sub 6}O{sub 8}(OH){sub 5}].H{sub 3}BO{sub 3} was obtained by hydrothermal synthesis from europium nitrate hydrate and boric acid. The compound crystallizes in the triclinic space group P1 (no. 2) with the lattice parameters a = 681.59(3), b = 714.17(3), c = 1271.88(6) pm, α = 96.02(1), β = 98.60(1), γ = 101.73(1) (Z = 2). The structure of Eu[B{sub 6}O{sub 8}(OH){sub 5}].H{sub 3}BO{sub 3} is isotypic to that of the samarium borate Sm[B{sub 6}O{sub 8}(OH){sub 5}].H{sub 3}BO{sub 3} and is built up from tetrahedral BO{sub 4} and trigonal-planar BO{sub 3} units, both of which are protonated at terminal and bridging oxygen positions. Boric acid molecules reside between the borate layers. Through hydrogen bonding, the structure forms a three-dimensional network. In channels down [110], the Eu{sup 3+} cations are eightfold coordinated by oxygen ions. The compound was also characterized by IR and Raman spectroscopy, and it shows typical Eu{sup 3+} line emission. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. Prions, Radionuclides and Clays: Impact of clay interlayer "acidity" on toxic compound speciation

    Science.gov (United States)

    Charlet, L.; Hureau, C.; Sobolev, O.; Cuello, G.; Chapron, Y.

    2007-05-01

    The physical and chemical processes that are the basis of contaminant retardation in clay rich medium, such as soil or nuclear waste repository, have been studied at the molecular level by a combination of molecular dynamics (MD), electron paramagnetic spectroscopy (EPR) and neutron diffraction with isotopic substitution (NDIS). The speciation of contaminants such as Sm, a radionuclide analogue, and Cu, bound to Prion protein (PrP), has been studied upon adsorption in clay interlayers. We used as molecular probe the P5-Cu(II) complex, where the P5 pentapeptide(92-96 PrP residues) represents one of the five Cu(II) binding site present in PrP, the key protein involved in diseases known as transmissible spongiform encephalopathies. In both cases, the pH of the interlayer has been inferred from the metal ion coordination, here used as a molecular reporter. In circum neutral pH waters, samarium is present as Sm(OH)3° species and should not be adsorbed in clay interlayer by "cation exchange" unless its hydrolysis is altered. Samarium NDIS results indicate that whether the number of oxygen nearest neighbours varies only from 8.5 to 7, as Sm penetrates the interlayer, the number of hydrogen nearest neighbours drops from 12 to 6. The high affinity of clay for Sm shows that a change in Sm hydrolysis occurs in the clay interlayer, but is directly followed by the formation of a surface complex with montmorillonite siloxane plane functional groups which prevents the determination of a "local pH". Conversely, has been found to be a much more sensitive interlayer water pH probe. and this peptide domain is involved in the misfolding of the protein,a transconformation which may lead to the pathogenic PrPSc form. We have therefore studied by EPR spectroscopy the adsorption of Cu(II)-P5 complexes on montmorillonite, and found the clay to have a large and selective adsorption capacity for the various [Cu(P5)H-n](2-n)+ complexes where n is the number of deprotonated amido function

  19. Reactor Fuel Isotopics and Code Validation for Nuclear Applications

    Energy Technology Data Exchange (ETDEWEB)

    Francis, Matthew W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Weber, Charles F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pigni, Marco T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gauld, Ian C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-02-01

    Experimentally measured isotopic concentrations of well characterized spent nuclear fuel (SNF) samples have been collected and analyzed by previous researchers. These sets of experimental data have been used extensively to validate the accuracy of depletion code predictions for given sets of burnups, initial enrichments, and varying power histories for different reactor types. The purpose of this report is to present the diversity of data in a concise manner and summarize the current accuracy of depletion modeling. All calculations performed for this report were done using the Oak Ridge Isotope GENeration (ORIGEN) code, an internationally used irradiation and decay code solver within the SCALE comprehensive modeling and simulation code. The diversity of data given in this report includes key actinides, stable fission products, and radioactive fission products. In general, when using the current ENDF/B-VII.0 nuclear data libraries in SCALE, the major actinides are predicted to within 5% of the measured values. Large improvements were seen for several of the curium isotopes when using improved cross section data found in evaluated nuclear data file ENDF/B-VII.0 as compared to ENDF/B-V-based results. The impact of the flux spectrum on the plutonium isotope concentrations as a function of burnup was also shown. The general accuracy noted for the actinide samples for reactor types with burnups greater than 5,000 MWd/MTU was not observed for the low-burnup Hanford B samples. More work is needed in understanding these large discrepancies. The stable neodymium and samarium isotopes were predicted to within a few percent of the measured values. Large improvements were seen in prediction for a few of the samarium isotopes when using the ENDF/B-VII.0 libraries compared to results obtained with ENDF/B-V libraries. Very accurate predictions were obtained for 133Cs and 153Eu. However, the predicted values for the stable ruthenium and rhodium isotopes varied

  20. Inhibidores de escaso impacto medioambiental. Sistemas basados en tierras raras

    Directory of Open Access Journals (Sweden)

    Aballe, A.

    1997-12-01

    Full Text Available Lanthanum, Cerium and Samarium chlorides have been investigated as uniform and pitting corrosion inhibitors of AISI 434 and AISI 304 stainless steels and AA 5083 Al-Mg alloy in 3.5 % NaCl aerated aqueous solutions. Their inhibitor power was evaluated by using electrochemical techniques such as Linear and Cyclic Polarisation. In each case, the highest protection degree was found in the solution dopped with 500 ppm of CeCl3. Similar results were obtained for additions of 500 ppm of LaCl3. Scanning Electron Microscopy and Energy Dispersive Spectroscopy allowed us to confirm the cathodic nature of the inhibition process.

    Se estudia el comportamiento de los cloruros de lantano, cerio y samario como inhibidores de los procesos de corrosión uniforme y por picaduras de los aceros inoxidables AISI 434 y AISI 304 y de la aleación de aluminio AA 5083 en disoluciones aireadas de NaCl al 3,5 %. Utilizando técnicas electroquímicas como polarización lineal y cíclica, se ha podido evaluar el poder inhibidor de estas sustancias. El mejor comportamiento inhibidor se ha obtenido para una concentración de 500 ppm de CeCl3, si bien para los aceros se obtienen resultados del mismo orden para 500 ppm de LaCl3. Con la ayuda de microscopía electrónica de barrido y espectroscopia de dispersión de energía se ha podido confirmar el carácter catódico del mecanismo de inhibición que tiene lugar en el proceso.

  1. Rumen passage kinetics of forage- and concentrate-derived fiber in dairy cows.

    Science.gov (United States)

    Krämer, M; Lund, P; Weisbjerg, M R

    2013-05-01

    Rumen passage kinetics of forage and concentrate fiber were analyzed to determine intrinsic feed effects and extrinsic ration effects on the retention time of fiber in the rumen. Sixteen Danish Holstein cows (557 ± 37 kg of body weight, 120 ± 21 d in milk, mean ± SD), 8 fitted with ruminal cannulas, were used in a completely randomized block experiment. Treatments differed in forage type (corn silage vs. grass silage) and forage:concentrate ratio (50:50 vs. 75:25 on organic matter basis). Fiber passage kinetics were studied based on rumen evacuations and on marker excretion profiles in feces fitted to 1 and 2 pool models. Each cow received ytterbium (Yb)-labeled fiber of the forage fed in the ration, samarium (Sm)-labeled fiber of the forage not fed in the ration, and concentrate fiber labeled with lanthanum (La), all as a single pulse dose. Nineteen fecal grab samples were taken per cow. Rumen liquid passage was studied using chromium-EDTA dosed as a single pulse into the rumen, followed by sampling of rumen liquid from both the ventral and medial rumen. Rumen mean retention time did not differ between forages when based on Yb-excretion profiles but was numerically longer for grass silage- than for corn silage-based rations using rumen evacuation data. Liquid rate of passage did not differ when calculated from medial or ventral rumen liquid samples, indicating that estimates for the probability of rumen liquid escape were independent of rumen sampling site. Total mean retention time decreased from forage fiber to concentrate fiber to liquid. The forage type itself (corn silage or grass silage) rather than the ration composition seemed to determine the total-tract retention time of forage fiber. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  2. Magnet-retained implant-supported overdentures: review and 1-year clinical report.

    Science.gov (United States)

    Ceruti, Paola; Bryant, S Ross; Lee, Jun-Ho; MacEntee, Michael I

    2010-01-01

    Open-field aluminum-nickle-cobalt magnets have been used in prosthodontics for many years, but success has been limited because these magnets are susceptible to corrosion by the saliva and because their retentive force is weak relative to the initial retention offered by mechanical attachments. More recently, magnets have been made from alloys of the rare earth elements samarium and neodymium, which provide stronger magnetic force per unit size. In addition, a new generation of laser-welded containers has improved protection from salivary corrosion. The current resurgence of interest in this type of attachment appears justified because, unlike mechanical attachments, magnets have potential for unlimited durability and might therefore be superior to mechanical ball or bar attachments for the retention of removable prostheses on implants. To date, no long-term prospective trials have been conducted to confirm the clinical durability of this new generation of magnets for retaining dentures on either teeth or implants. The aim of this study was to document initial clinical experiences and levels of satisfaction among edentulous patients treated with mandibular implant-supported overdentures retained using a new generation of rare-earth magnetic attachments. At the outset, all but one of the 17 patients had had several years of experience with implant-supported overdentures. During the first year, the mean overall satisfaction among these 17 patients increased from less than 70 to over 90 out of 100 (standardized visual analogue scale). No unusual difficulties were encountered in rendering the treatment or maintaining the attachments. This report offers preliminary evidence of the excellent potential of these magnets for retaining mandibular implant-supported overdentures.

  3. Enhanced solar light photodegradation of brilliant black bis-azo dye in aqueous solution by F, Sm3+ codoped TiO2

    Science.gov (United States)

    Mukonza, Sabastian S.; Nxumalo, Edward N.; Mamba, Bhekie B.; Mishra, Ajay K.

    2017-05-01

    This research focuses on improving the photocatalytic efficiency of TiO2 during the photo-mineralisation of brilliant black (BN) bis-azo dye pollutant in aqueous solution. This was achieved by improving the visible light activity of TiO2 photocatalyst semiconductor through co-doping of fluorine (F) and trivalent samarium ions (Sm3+) into a TiO2 matrix using a modified sol-gel synthesis method. Structural, morphological, and textural properties were evaluated using ultra-violet /visible spectroscopy (UV-visible), Raman spectroscopy, scanning electron microscopy coupled to energy dispersive X-ray spectroscopy (SEM/EDX) and X-ray diffraction spectroscopy (XRD). Photocatalytic and degradation efficiencies were assessed by decolourisation of BN dye in aqueous solution. Complete degradation of BN was attained after an irradiation time of 3 h using F, Sm3+-TiO2 (0.6% Sm3+) compared to 73.4% achieved using pristine TiO2. Pseudo first order kinetics rate constants (Ka) were 2.73×10-2 and 6.6×10-3 min-1 for Sm3+-TiO2 (0.6%Sm3+) and pristine TiO2, respectively, which translates to a remarkably high enhancement factor of 4. The results obtained established that doping of TiO2 by F and Sm3+ enhances the photocatalytic performance of TiO2 during solar light radiation which enables the utilisation of freely available and clean solar energy.

  4. Theoretical evaluation of the production of the poisons Xe-135 and Sm-149 of the TRIGA Mark III reactor with mixed core; Evaluacion teorica de la produccion de los venenos Xe-135 y Sm-149 del reactor TRIGA Mark III con nucleo mixto

    Energy Technology Data Exchange (ETDEWEB)

    Paredes G, L.C

    1991-11-15

    It was theoretically determined the accumulation of the Xe{sup 135} and Sm {sup 149} in function, of the time during a stationary state of 72 h. continuous for the reactor TRIGA Mark III to 1 MW of thermal power with mixed core. The values of negative reactivity due to these isotopes are of 2.04 dollars and 0.694 dollars to the 72 h, quantities that will have to be compensated if wants that the reactor continues working to this power. Under the same conditions but considering a core with standard fuel, it was found a value of {rho} = 1.70 dollars, resulting a difference of 0.30 dollars of negative reactivity in function of the type of analyzed core. This difference is important for the calculations of fuel management of a reactor. The concentration in balance of the xenon was reaches after an operation to constant power of 1 MW by 50 h, contrary to the samarium that reaches it balance after 3 weeks of operation starting from the initial start up and it stays constant along the useful life of the reactor while a change of fuel doesn't exist. It was obtained that for operation times greater to 60 h. at 1 MW, a peak of negative reactivity of the Xe{sup 135} is generated between the 7 and 11 h after the instantaneous shut down, with a value of 2.43 dollars, that is to say 0.39 additional dollars to those taken place during the continuous irradiation. (Author)

  5. INFLUENCE OF SINTERING TEMPERATURE ON THE POLARIZATION RESISTANCE OF LaO20.6SrO20.4CoO20.2FeO20.8O3-δ - SDC CARBONATE COMPOSITE CATHODE

    Directory of Open Access Journals (Sweden)

    Nurul Akidah Baharuddin

    2016-05-01

    Full Text Available The effects of sintering temperature of an LSCF-samarium-doped ceria carbonate (SDCC cathode composite film on its polarization resistance (Rp were evaluated in this study. An LSCF-SDCC composite cathode was prepared for cathode film development by electrophoretic deposition (EPD. The LSCF-SDCC composite cathode was prepared at 50:50 weight percentage ratio. An EPD suspension which is based on an organic aqueous solution was used, and a mixture of ethanol and deionized water was used as medium with poly diallyl dimethyl ammonium chloride (PDADMAC as a dispersing agent. SDCC substrate was used, and EPD was performed on both sides. A symmetrical cell with cathode composite LSCF-SDCC films on both sides of the substrate was subjected to sintering at five different temperatures (from 550°C to 750°C. A symmetrical cell was painted using silver paste before undergoing electrochemical performance test (air condition, in which the impedance, Z data, was measured. The effects of sintering temperature change on element content and film porosity were first investigated by energy-dispersive X-ray spectroscopy, field emission scanning electron microscopy, and J-image analysis. Ceramic-based cathode LSCF-SDCC that was sintered at 600°C exhibited the lowest Rp at a value of 0.68 Ω when operated at 650°C. This study proved that EPD has potential in developing IT-LT solid oxide fuel cell cathode components with high electrochemical performance in terms of Rp values.

  6. Study of radionuclides complexes formation by organic compounds in intermediate and low-level radioactive wastes; Etude de la mobilisation, par des complexants organiques, des radionucleides contenus dans les dechets radioactifs de faible et moyenne activite

    Energy Technology Data Exchange (ETDEWEB)

    Bourbon, X.

    1994-12-01

    In the general framework of the safety of nuclear wastes of low and intermediate activity, we studied the effects of organic compounds on the solubilization of metallic cations. Organic compounds originate from the degradation of cellulose in concrete interstitial waters. Degradation reactions generate a number of products, among which carboxylic acids. These acids are known for their chelating properties. We first analysed the degradation of cellulose in alkaline conditions: we qualitatively and quantitatively determined the degradation products for various reaction progress indices, including a dozen of carboxylic acids. The principal goal of our work was the prediction of the behaviour of metallic cations in such cellulose degradation solutions. Owing the complexity of the system, a priori theoretical calculation are not possible. We have thus decided to choose tetra hydroxy pentanoic acid as a reference compound in order to simulate as accurately as possible the behaviour of more complex acids which contain similar functional groups. We have experimentally determined the complexing properties of this reference acid toward divalent cobalt and copper, and trivalent samarium and europium. Simple and mixed complex (hydroxyl) have been evidenced in alkaline medium. Their stability constants have been determined and extrapolated at zero ionic strength using the SIT theory. These results allowed us to theoretically predict the behaviour of our four reference cations in cellulose degradation products formed in concrete interstitial waters. In parallel, we have measured their solubility in real cellulose degradation solutions. Solubility predictions are correct for transition metals, but not for rare earth cations. In this case the complexes which have been identified with tetra hydroxy pentanoic acid are not stable enough to dissolve metallic hydroxides. In real degradation solutions, other compounds would account for the enhancement of rare earth elements solubility.

  7. Validating Mechanistic Sorption Model Parameters and Processes for Reactive Transport in Alluvium

    Energy Technology Data Exchange (ETDEWEB)

    Zavarin, M; Roberts, S K; Rose, T P; Phinney, D L

    2002-05-02

    The laboratory batch and flow-through experiments presented in this report provide a basis for validating the mechanistic surface complexation and ion exchange model we use in our hydrologic source term (HST) simulations. Batch sorption experiments were used to examine the effect of solution composition on sorption. Flow-through experiments provided for an analysis of the transport behavior of sorbing elements and tracers which includes dispersion and fluid accessibility effects. Analysis of downstream flow-through column fluids allowed for evaluation of weakly-sorbing element transport. Secondary Ion Mass Spectrometry (SIMS) analysis of the core after completion of the flow-through experiments permitted the evaluation of transport of strongly sorbing elements. A comparison between these data and model predictions provides additional constraints to our model and improves our confidence in near-field HST model parameters. In general, cesium, strontium, samarium, europium, neptunium, and uranium behavior could be accurately predicted using our mechanistic approach but only after some adjustment was made to the model parameters. The required adjustments included a reduction in strontium affinity for smectite, an increase in cesium affinity for smectite and illite, a reduction in iron oxide and calcite reactive surface area, and a change in clinoptilolite reaction constants to reflect a more recently published set of data. In general, these adjustments are justifiable because they fall within a range consistent with our understanding of the parameter uncertainties. These modeling results suggest that the uncertainty in the sorption model parameters must be accounted for to validate the mechanistic approach. The uncertainties in predicting the sorptive behavior of U-1a and UE-5n alluvium also suggest that these uncertainties must be propagated to nearfield HST and large-scale corrective action unit (CAU) models.

  8. SU-D-304-02: Magnetically Focused Proton Irradiation of Small Field Targets

    Energy Technology Data Exchange (ETDEWEB)

    McAuley, GA; Slater, JM [Loma Linda University, Loma Linda, CA (United States); Slater, JD; Wroe, AJ [Loma Linda University Medical Center, Loma Linda, CA (United States)

    2015-06-15

    Purpose: To investigate the use of magnetic focusing for small field proton irradiations. It is hypothesized that magnetic focusing will provide significant dose distribution benefits over standard collimated beams for fields less than 10 mm diameter. Methods: Magnets consisting of 24 segments of radiation hard samarium-cobalt adhered into hollow cylinders were designed and manufactured. Two focusing magnets were placed on a positioning track on our Gantry 1 treatment table. Proton beams with energies of 127 and 157 MeV, 15 and 30 mm modulation, and 8 mm initial diameters were delivered to a water tank using single-stage scattering. Depth dose distributions were measured using a PTW PR60020 diode detector and transverse profiles were measured with Gafchromic EBT3 film. Monte Carlo simulations were also performed - both for comparison with experimental data and to further explore the potential of magnetic focusing in silica. For example, beam spot areas (based on the 90% dose contour) were matched at Bragg depth between simulated 100 MeV collimated beams and simulated beams focused by two 400 T/m gradient magnets. Results: Preliminary experimental results show 23% higher peak to entrance dose ratios and flatter spread out Bragg peak plateaus for 8 mm focused beams compared with uncollimated beams. Monte Carlo simulations showed 21% larger peak to entrance ratios and a ∼9 fold more efficient dose to target delivery compared to spot-sized matched collimated beams. Our latest results will be presented. Conclusion: Our results suggest that rare earth focusing magnet assemblies could reduce skin dose and beam number while delivering dose to nominally spherical radiosurgery targets over a much shorter time compared to unfocused beams. Immediate clinical applications include those associated with proton radiosurgery and functional radiosurgery of the brain and spine, however expanded treatment sites can be also envisaged.

  9. Uptake and Effects of Six Rare Earth Elements (REEs on Selected Native and Crop Species Growing in Contaminated Soils.

    Directory of Open Access Journals (Sweden)

    David Carpenter

    Full Text Available Rare earth elements (REEs have become increasingly important metals used in modern technology. Processes including mining, oil refining, discarding of obsolete equipment containing REEs, and the use of REE-containing phosphate fertilizers may increase the likelihood of environmental contamination. However, there is a scarcity of information on the toxicity and accumulation of these metals to terrestrial primary producers in contaminated soils. The objective of this work was to assess the phytotoxicity and uptake from contaminated soil of six REEs (chloride forms of praseodymium, neodymium, samarium, terbium, dysprosium, and erbium on three native plants (Asclepias syriaca L., Desmodium canadense (L. DC., Panicum virgatum L. and two crop species (Raphanus sativus L., Solanum lycopersicum L. in separate dose-response experiments under growth chamber conditions. Limited effects of REEs were found on seed germination and speed of germination. Effects on aboveground and belowground biomass were more pronounced, especially for the three native species, which were always more sensitive than the crop species tested. Inhibition concentrations (IC25 and IC50 causing 25 or 50% reductions in plant biomass respectively, were measured. For the native species, the majority of aboveground biomass IC25s (11 out of 18 fell within 100 to 300 mg REE/kg dry soil. In comparison to the native species, IC25s for the crops were always greater than 400 mg REE/kg, with the majority of results (seven out of 12 falling above 700 mg REE/kg. IC50s were often not detected for the crops. Root biomass of native species was also affected at lower doses than in crops. REE uptake by plants was higher in the belowground parts than in the above-ground plant tissues. Results also revealed that chloride may have contributed to the sensitivity of the native species, Desmodium canadense, one of the most sensitive species studied. Nevertheless, these results demonstrated that

  10. Use of seaweeds for monitoring trace elements in coastal waters.

    Science.gov (United States)

    Jayasekera, R; Rossbach, M

    1996-06-01

    Concentrations of a wide range of trace elements: arsenic, cadmium, cobalt, chromium, hafnium, nickel, thorium, uranium, zinc and the rare earth elements, cerium, europium, samarium, terbium and ytterbium were determined by instrumental neutron activation analysis in the brown alga,Fucus vesiculosus from Eckwarder Hörne, North Sea and from Rügen, Baltic Sea. Another brown alga,Sargassum filipendula from Sri Lanka, Indian ocean (representing an unpolluted control station) was similarly investigated. Cobalt, chromium and nickel concentrations were highest inF. vesiculosus from the North Sea while zinc was highest in samples from the Baltic Sea, reflecting high levels of these elements in coastal waters of the North and the Baltic sea. Cadmium, cobalt, nickel and zinc levels were lowest inS. filipendula from Sri Lanka, probably demonstrating lower levels of those elements in coastal waters. Concentration levels of hafnium, thorium, uranium, and the rare earth elements were highest inS. filipendula. Two years later in 1994,S. filipendula along withUlva sp. (green alga) was resampled from the same sampling site, and in addition to the above elements, six other trace elements (Ag, Ba, Br, Rb, Se and Sr) were determined.Sargassium filipendula showed a particular affinity for Ag, As, Br and Sr. For the other elements, marginal concentration differences were observed betweenS. filipendula andUlva sp., probably reflecting the regional background levels. Substantially higher concentrations of Hf, Th, U, and the rare earths were found again in the 1994Sargassum andUlva samples, reflecting the effect of a substrate rich in rare earth elements. The brown algae used in this study may be used to monitor trace elements in coastal waters.

  11. On the Dehydrocoupling of Alkenylacetylenes Mediated by Various Samarocene Complexes: A Charming Story of Metal Cooperativity Revealing a Novel Dual Metal σ-Bond Metathesis Type of Mechanism (DM|σ-BM

    Directory of Open Access Journals (Sweden)

    Christos E. Kefalidis

    2015-12-01

    Full Text Available The prevailing reductive chemistry of Sm(II has been accessed and explored mostly by the use of samarocene precursors. The highly reducing character of these congeners, along with their Lewis acidity and predominantly ionic bonding, allows for the relatively facile activation of C–H bonds, as well as peculiar transformations of unsaturated substrates (e.g., C–C couplings. Among other important C–C coupling reactions, the reaction of phenylacetylene with different mono- or bimetallic samarocene complexes affords trienediyl complexes of the type {[(C5Me52Sm]2(µ-η2:η2-PhC4Ph}. In contrast, when t-butylacetylene is used, uncoupled monomers of the type (C5Me52Sm(C≡C–tBu were obtained. Although this type of reactivity may appear to be simple, the mechanism underlying these transformations is complex. This conclusion is drawn from the density functional theory (DFT mechanistic studies presented herein. The operating mechanistic paths consist of: (i the oxidation of each samarium center and the concomitant double reduction of the alkyne to afford a binuclear intermediate; (ii the C–H scission of the acetylinic bond that lies in between the two metals; (iii a dual metal σ-bond metathesis (DM|σ-SBM process that releases H2; and eventually (iv the C–C coupling of the two bridged μ-alkynides to give the final bimetallic trienediyl complexes. For the latter mechanistic route, the experimentally used phenylacetylene was considered first as well as the aliphatic hex-1-yne. More interestingly, we shed light into the formation of the mono(alkynide complex, being the final experimental product of the reaction with t-butylacetylene.

  12. Research on Acetylene Sensing Properties and Mechanism of SnO2 Based Chemical Gas Sensor Decorated with Sm2O3

    Directory of Open Access Journals (Sweden)

    Qu Zhou

    2015-01-01

    Full Text Available Acetylene C2H2 gas is one of the most important fault characteristic hydrocarbon gases dissolved in oil immersed power transformer oil. This paper reports the successful preparation and characterization of samarium oxide Sm2O3 decorated tin oxide SnO2 based sensors with hierarchical rod structure for C2H2 gas detection. Pure and Sm2O3 decorated SnO2 sensing structures were synthesized by a facile hydrothermal method and characterized by XRD, FESEM, TEM, EDS, and XPS measurements, respectively. Planar chemical gas sensors with the synthesis samples were fabricated, and their sensing performances to C2H2 gas were systematically performed and automatically recorded by a CGS-1 TP intelligent gas sensing analysis system. The optimum operating temperature of the Sm2O3 decorated SnO2 based sensor towards 50 μL/L of C2H2 is 260°C, and its corresponding response value is 38.12, which is 6 times larger than the pure one. Its response time is about 8–10 s and 10–13 s for recovery time. Meanwhile good stability and reproducibility of the decorated sensor to C2H2 gas are also obtained. Furthermore, the proposed sensor exhibits excellent C2H2 selectivity among some potential interface gases, like H2 and CO gas. All sensing results indicate the sensor fabricated with oxide Sm2O3 decorated SnO2 nanorods might be a promising candidate for C2H2 detection in practice.

  13. Role of flux on morphology and luminescence properties of Sm3+ doped Y2SiO5 nanopowders for WLEDs

    Science.gov (United States)

    Ramakrishna, G.; Nagabhushana, H.; Prashantha, S. C.; Sharma, S. C.; Nagabhushana, B. M.

    2015-02-01

    The study involves preparation of samarium doped Y2SiO5 (YSO) nano powders by solution combustion method using urea as a fuel for the first time. Effect of different fluxes on the crystallization behavior, morphology and photoluminescence (PL) properties of YSO:Sm3+ (1-9 mol%) were investigated. The final product was characterized by Powder X-ray diffraction (PXRD), Scanning Electron Microscopy (SEM) and UV-Vis spectroscopy. The average crystallite size estimated by Debye-Scherer's and Williamson-Hall plots were found to be in the range of 10-50 nm. Samples calcined at 1100 °C show pure monoclinic X1 phase; whereas, samples calcined at 1200 and 1300 °C show pure X2 phase of YSO. Photoluminescence (PL) studies of Sm3+ (1-9 mol%) doped YSO for near ultra violet (NUV) excitation (407 nm) was studied in order to investigate the possibility of its use in white light emitting diode (WLED) applications. The emission spectra consists of intra 4f transitions of Sm3+, such as 4G5/2 → 6H5/2 (∼560 nm), 4G5/2 → 6H7/2 (600-613 nm), 4G5/2 → 6H9/2 (∼650 nm), 4G5/2 → 6H11/2 (715 nm) and 4G5/2 → 6H13/2 (763 nm) respectively. The emission intensity of the phosphor was found to be enhancing after addition of fluxes. Further, the emission at 600-613 nm show strong orange-red emission and can be applied to the orange-red emission of phosphor for near ultra violet excitation.

  14. Role of flux on morphology and luminescence properties of Sm(3+) doped Y2SiO5 nanopowders for WLEDs.

    Science.gov (United States)

    Ramakrishna, G; Nagabhushana, H; Prashantha, S C; Sharma, S C; Nagabhushana, B M

    2015-02-05

    The study involves preparation of samarium doped Y2SiO5 (YSO) nano powders by solution combustion method using urea as a fuel for the first time. Effect of different fluxes on the crystallization behavior, morphology and photoluminescence (PL) properties of YSO:Sm(3+) (1-9 mol%) were investigated. The final product was characterized by Powder X-ray diffraction (PXRD), Scanning Electron Microscopy (SEM) and UV-Vis spectroscopy. The average crystallite size estimated by Debye-Scherer's and Williamson-Hall plots were found to be in the range of 10-50 nm. Samples calcined at 1100°C show pure monoclinic X1 phase; whereas, samples calcined at 1200 and 1300°C show pure X2 phase of YSO. Photoluminescence (PL) studies of Sm(3+) (1-9 mol%) doped YSO for near ultra violet (NUV) excitation (407 nm) was studied in order to investigate the possibility of its use in white light emitting diode (WLED) applications. The emission spectra consists of intra 4f transitions of Sm(3+), such as (4)G5/2→(6)H5/2 (∼560 nm), (4)G5/2→(6)H7/2 (600-613 nm), (4)G5/2→(6)H9/2 (∼650 nm), (4)G5/2→(6)H11/2 (715 nm) and (4)G5/2→(6)H13/2 (763 nm) respectively. The emission intensity of the phosphor was found to be enhancing after addition of fluxes. Further, the emission at 600-613 nm show strong orange-red emission and can be applied to the orange-red emission of phosphor for near ultra violet excitation. Copyright © 2014 Elsevier B.V. All rights reserved.

  15. Safety and feasibility of percutaneous vertebroplasty with radioactive {sup 153}Sm PMMA in an animal model

    Energy Technology Data Exchange (ETDEWEB)

    Lu Jun [Department of Radiotherapy, Xijing Hospital, Fourth Military Medical University, 15 West Changle Road, Xi' an 710032, Shaanxi Province (China); Deng Jinglan, E-mail: dengjinglan@gmail.com [Department of Nuclear Medicine, Xijing Hospital, Fourth Military Medical University, 15 West Changle Road, Xi' an 710032, Shaanxi Province (China); Zhao Haitao [Department of Radiology, Xijing Hospital, Fourth Military Medical University, 15 West Changle Road, Xi' an 710032, Shaanxi Province (China); Shi Mei [Department of Radiotherapy, Xijing Hospital, Fourth Military Medical University, 15 West Changle Road, Xi' an 710032, Shaanxi Province (China); Wang Jing [Department of Nuclear Medicine, Xijing Hospital, Fourth Military Medical University, 15 West Changle Road, Xi' an 710032, Shaanxi Province (China); Zhao Lina [Department of Radiotherapy, Xijing Hospital, Fourth Military Medical University, 15 West Changle Road, Xi' an 710032, Shaanxi Province (China)

    2011-05-15

    Purpose: We investigated the safety and feasibility of the combination of samarium-153-ethylenediamine tetramethylene phosphonate ({sup 153}Sm-EDTMP)-incorporated bone cement (BC) with percutaneous vertebroplasty (PVP) in dogs. Methods and materials: {sup 153}Sm-EDTMP-incorporated BC was prepared by combining solid {sup 153}Sm-EDTMP and polymethylmethacrylate (PMMA) immediately before PVP. It was then injected into the vertebrae of four healthy mongrel dogs (two males and two females) by PVP under CT guidance. Each dog was subjected to five PVP sessions at a {sup 153}Sm-EDTMP dose of 30-70 mCi. The suppressive effect of local injection of {sup 153}Sm-EDTMP on the hematopoietic system was evaluated through counting of peripheral blood cells. Distribution of {sup 153}Sm-EDTMP-incorporated BC and the status of tissues adjacent to injected vertebrae were evaluated with SPECT, CT and MRI. Histopathology was carried out to assess the influence of PVP on the vertebra and adjacent tissues at the microscopic level. Results: PVP was done successfully, and all dogs exhibited normal behavior and stable physical signs after procedures. {sup 153}Sm-EDTMP-incorporated BC was concentrated mainly in target vertebrae, and the peripheral blood cells remained within normal range. The spinal cord and tissues around BC did not exhibit signs of injury even when the dosage of {sup 153}Sm-EDTMP increased from 30 mCi to 70 mCi. Conclusion: A dose lower than 70 mCi of {sup 153}Sm is safe when it was injected into vertebrae. {sup 153}Sm-EDTMP-incorporated BC did not influence the effect of PVP. This means might strengthen anti-tumor activity locally for vertebra with osseous metastasis without damaging adjacent tissues.

  16. Experimental benchmark of non-local-thermodynamic-equilibrium plasma atomic physics codes; Validation experimentale des codes de physique atomique des plasmas hors equilibre thermodynamique local

    Energy Technology Data Exchange (ETDEWEB)

    Nagels-Silvert, V

    2004-09-15

    The main purpose of this thesis is to get experimental data for the testing and validation of atomic physics codes dealing with non-local-thermodynamical-equilibrium plasmas. The first part is dedicated to the spectroscopic study of xenon and krypton plasmas that have been produced by a nanosecond laser pulse interacting with a gas jet. A Thomson scattering diagnostic has allowed us to measure independently plasma parameters such as electron temperature, electron density and the average ionisation state. We have obtained time integrated spectra in the range between 5 and 10 angstroms. We have identified about one hundred xenon rays between 8.6 and 9.6 angstroms via the use of the Relac code. We have discovered unknown rays for the krypton between 5.2 and 7.5 angstroms. In a second experiment we have extended the wavelength range to the X UV domain. The Averroes/Transpec code has been tested in the ranges from 9 to 15 angstroms and from 10 to 130 angstroms, the first range has been well reproduced while the second range requires a more complex data analysis. The second part is dedicated to the spectroscopic study of aluminium, selenium and samarium plasmas in femtosecond operating rate. We have designed an interferometry diagnostic in the frequency domain that has allowed us to measure the expanding speed of the target's backside. Via the use of an adequate isothermal model this parameter has led us to know the plasma electron temperature. Spectra and emission times of various rays from the aluminium and selenium plasmas have been computed satisfactorily with the Averroes/Transpec code coupled with Film and Multif hydrodynamical codes. (A.C.)

  17. Water resources research program. Pollution of coastal waters off Chicago by sinking plumes from the Indiana Harbor Canal

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, W.; McCown, D.L.; Raphaelian, L.A.; Saunders, K.D.

    1977-12-01

    On March 2, 1977, during sinking-plume conditions, a portion of the water of the Indiana Harbor Canal (IHC) was injected with samarium and rhodamine-dye tags and a section of the IHC's surface was covered with simulated oily waste tagged with dysprosium. Water samples were taken downcurrent, over a 54-hr period, from a vessel and from the raw-water streams from the intakes at Chicago's South Water Filtration Plant (SWFP). Bottom currents and water temperatures were measured almost continuously at four Lake Michigan stations located between the IHC and the SWFP. Unequivocal evidence is presented for transport of the tagged IHC water and oily waste to the SWFP's intakes. Organic contaminants from the IHC were present in trace concentrations in the SWFP's raw water. A model for the transport and mixing of the entire IHC effluent, for the environmental conditions during the experiment, indicates a minimum dilution of 4 in the plume offshore of the SWFP and, for the assumed plume trajectory, values of 5 x 10/sup 2/ and 10/sup 5/ at the shore and crib intakes, respectively. A similar model applied to the experimental situation of tagged effluent showed reasonable agreement with measurements. Analysis of historical data indicates that the worst-case pollution event that might be experienced at the SWFP, assuming constant pollutant loading in the IHC, would be due to 24 hr of northwest wind followed by a 3.0-in. (7.6 cm), 24-hr rainfall that coincides with 3.0 x 10/sup 6/ m of total wind movement from the southerly quadrants.

  18. Water quality and quantity of selected springs and seeps along the Colorado River corridor, Utah and Arizona: Arches National Park, Canyonlands National Park, Glen Canyon National Recreation Area, and Grand Canyon National Park, 1997-98

    Science.gov (United States)

    Taylor, Howard E.; Spence, John R.; Antweiler, Ronald C.; Berghoff, Kevin; Plowman, Terry I.; Peart, Dale B.; Roth, David A.

    2004-01-01

    The U.S. Geological Survey, in cooperation with the National Park Service conducted an intensive assessment of selected springs along the Colorado River Corridor in Arches National Park, Canyonlands National Park, Glen Canyon National Recreation Area, and Grand Canyon National Park in 1997 and 1998, for the purpose of measuring and evaluating the water quality and quantity of the resource. This study was conducted to establish baseline data for the future evaluation of possible effects from recreational use and climate change. Selected springs and seeps were visited over a study period from 1997 to 1998, during which, discharge and on-site chemical measurements were made at selected springs and seeps, and samples were collected for subsequent chemical laboratory analysis. This interdisciplinary study also includes simultaneous studies of flora and fauna, measured and sampled coincidently at the same sites. Samples collected during this study were transported to U.S. Geological Survey laboratories in Boulder, Colorado, where analyses were performed using state-of-the-art laboratory technology. The location of the selected springs and seeps, elevation, geology, aspect, and onsite measurements including temperature, discharge, dissolved oxygen, pH, and specific conductance, were recorded. Laboratory analyses include determinations for alkalinity, aluminum, ammonium (nitrogen), antimony, arsenic, barium, beryllium, bismuth, boron, bromide, cadmium, calcium, cerium, cesium, chloride, chromium, cobalt, copper, dissolved inorganic carbon, dissolved organic carbon, dysprosium, erbium, europium, fluoride, gadolinium, holmium, iodine, iron, lanthanum, lead, lithium, lutetium, magnesium, manganese, mercury, molybdenum, neodymium, nickel, nitrate (nitrogen), nitrite (nitrogen), phosphate, phosphorus, potassium, praseodymium, rhenium, rubidium, samarium, selenium, silica, silver, sodium, strontium, sulfate, tellurium, terbium, thallium, thorium, thulium, tin, titanium, tungsten

  19. Potential energy surface for the reaction Sm+ + CO2 → SmO+ + CO: guided ion beam and theoretical studies.

    Science.gov (United States)

    Armentrout, P B; Cox, Richard M

    2017-05-10

    The potential energy surface (PES) for the oxidation of samarium cations by carbon dioxide is explored both experimentally and theoretically. Using guided ion beam tandem mass spectrometry, several reactions are examined as a function of kinetic energy. These include the title reaction as well as its reverse along with the collision-induced dissociation of Sm+(CO2) and OSm+(CO) with Xe. Analysis of the kinetic energy dependent cross sections yields barriers for the forward and reverse oxidation reaction of 1.77 ± 0.11 and 2.04 ± 0.13 eV, respectively, and Sm+-OCO and OSm+-CO bond dissociation energies (BDEs) of 0.42 ± 0.03 and 0.97 ± 0.07 eV, respectively. BDEs for Sm+(CO2)x for x = 2 and 3 are also determined as 0.40 ± 0.13 and 0.48 ± 0.12 eV, respectively. The PESs for the title reaction along the sextet and octet spin surfaces are also examined theoretically at the MP2 and CCSD(T) levels using both effective core potential and all-electron basis sets. Reasonable agreement between theory and experiment is obtained for the experimentally characterized intermediates, although all-electron basis sets and spin-orbit effects are needed for quantitative agreement. The observed barrier for oxidation is shown to likely correspond to the energy of the crossing between surfaces corresponding to the ground state electronic configuration of Sm+ (8F,4f66s1) and an excited surface having two electrons in the valence space (excluding 4f), which are needed to form the strong SmO+ bond.

  20. Single-Plane Magnetically Focused Elongated Small Field Proton Beams.

    Science.gov (United States)

    McAuley, Grant A; Slater, James M; Wroe, Andrew J

    2015-08-01

    We previously performed Monte Carlo simulations of magnetically focused proton beams shaped by a single quadrapole magnet and thereby created narrow elongated beams with superior dose delivery characteristics (compared to collimated beams) suitable for targets of similar geometry. The present study seeks to experimentally validate these simulations using a focusing magnet consisting of 24 segments of samarium cobalt permanent magnetic material adhered into a hollow cylinder. Proton beams with properties relevant to clinical radiosurgery applications were delivered through the magnet to a water tank containing a diode detector or radiochromic film. Dose profiles were analyzed and compared with analogous Monte Carlo simulations. The focused beams produced elongated beam spots with high elliptical symmetry, indicative of magnet quality. Experimental data showed good agreement with simulations, affirming the utility of Monte Carlo simulations as a tool to model the inherent complexity of a magnetic focusing system. Compared to target-matched unfocused simulations, focused beams showed larger peak to entrance ratios (26% to 38%) and focused simulations showed a two-fold increase in beam delivery efficiency. These advantages can be attributed to the magnetic acceleration of protons in the transverse plane that tends to counteract the particle outscatter that leads to degradation of peak to entrance performance in small field proton beams. Our results have important clinical implications and suggest rare earth focusing magnet assemblies are feasible and could reduce skin dose and beam number while delivering enhanced dose to narrow elongated targets (eg, in and around the spinal cord) in less time compared to collimated beams. © The Author(s) 2014.

  1. Core-shell nanophosphor architecture: toward efficient energy transport in inorganic/organic hybrid solar cells.

    Science.gov (United States)

    Li, Qinghua; Yuan, Yongbiao; Chen, Zihan; Jin, Xiao; Wei, Tai-huei; Li, Yue; Qin, Yuancheng; Sun, Weifu

    2014-08-13

    In this work, a core-shell nanostructure of samarium phosphates encapsulated into a Eu(3+)-doped silica shell has been successfully fabricated, which has been confirmed by X-ray diffraction, transmission electron microscopy (TEM), and high-resolution TEM. Moreover, we report the energy transfer process from the Sm(3+) to emitters Eu(3+) that widens the light absorption range of the hybrid solar cells (HSCs) and the strong enhancement of the electron-transport of TiO2/poly(3-hexylthiophene) (P3HT) bulk heterojunction (BHJ) HSCs by introducing the unique core-shell nanoarchitecture. Furthermore, by applying femtosecond transient absorption spectroscopy, we successfully obtain the electron transport lifetimes of BHJ systems with or without incorporating the core-shell nanophosphors (NPs). Concrete evidence has been provided that the doping of core-shell NPs improves the efficiency of electron transfers from donor to acceptor, but the hole transport almost remains unchanged. In particular, the hot electron transfer lifetime was shortened from 30.2 to 16.7 ps, i.e., more than 44% faster than pure TiO2 acceptor. Consequently, a notable power conversion efficiency of 3.30% for SmPO4@Eu(3+):SiO2 blended TiO2/P3HT HSCs is achieved at 5 wt % as compared to 1.98% of pure TiO2/P3HT HSCs. This work indicates that the core-shell NPs can efficiently broaden the absorption region, facilitate electron-transport of BHJ, and enhance photovoltaic performance of inorganic/organic HSCs.

  2. Highlights 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-02-15

    This document summarizes a year of activities for the ESRF (European synchrotron radiation facilities), this facility serves 31 beamlines that represent 34 end stations that can be run independently. This document is organized into 9 parts. Part 1: 'high resolution and resonance scattering' deals with surface science and magnetism at high pressure, in particular results are presented for samarium and europium chalcogenides. A cross-section of a variety of applications are presented, they range from glass physics to the understanding of thermoelectric materials. Part 2: 'materials sciences' deals with material behaviour under extreme conditions (metallic sulfur above 100 GPa,...) general applications of X-ray diffraction : stress and strain studies, assessment of excess free volume in metallic glasses, or grain nucleation and growth kinetics during solidification. Part 3: 'soft condensed matter'. Part 4: 'structural biology'. Part 5: 'surface and interface science' (at ESRF surfaces and interfaces are studied at about 50% of all beamlines). A study shows the existence of ordered SiGe domains in the interior of the small Ge islands in Si, whereas bulk SiGe alloy is disordered. Other studies shed light on the surprisingly different magnetic behaviour of ultra-thin cobalt and nickel films on a platinum surface. Part 6 : 'X-ray absorption and magnetic scattering'. Many of the studies push the limits of methods using high pressure, high magnetic fields, high and low temperature with absorption and scattering techniques. There are also examples of measurements on the femtosecond time scale using the core-hole clock method and on femto-meter length scale in magnetostriction measurements. Part 7: 'X-ray imaging and optics'. Part 8: 'the X-ray source'. Part 9: 'facts and figures'. (A.C.)

  3. Stirling Space Engine Program. Volume 1; Final Report

    Science.gov (United States)

    Dhar, Manmohan

    1999-01-01

    The objective of this program was to develop the technology necessary for operating Stirling power converters in a space environment and to demonstrate this technology in full-scale engine tests. Hardware development focused on the Component Test Power Converter (CTPC), a single cylinder, 12.5-kWe engine. Design parameters for the CTPC were 150 bar operating pressure, 70 Hz frequency, and hot-and cold-end temperatures of 1050 K and 525 K, respectively. The CTPC was also designed for integration with an annular sodium heat pipe at the hot end, which incorporated a unique "Starfish" heater head that eliminated highly stressed brazed or weld joints exposed to liquid metal and used a shaped-tubed electrochemical milling process to achieve precise positional tolerances. Selection of materials that could withstand high operating temperatures with long life were another focus. Significant progress was made in the heater head (Udimet 700 and Inconel 718 and a sodium-filled heat pipe); the alternator (polyimide-coated wire with polyimide adhesive between turns and a polyimide-impregnated fiberglass overwrap and samarium cobalt magnets); and the hydrostatic gas bearings (carbon graphite and aluminum oxide for wear couple surfaces). Tests on the CTPC were performed in three phases: cold end testing (525 K), engine testing with slot radiant heaters, and integrated heat pipe engine system testing. Each test phase was successful, with the integrated engine system demonstrating a power level of 12.5 kWe and an overall efficiency of 22 percent in its maiden test. A 1500-hour endurance test was then successfully completed. These results indicate the significant achievements made by this program that demonstrate the viability of Stirling engine technology for space applications.

  4. Selected trace elements in the Sacramento River, California: occurrence and distribution.

    Science.gov (United States)

    Taylor, H E; Antweiler, R C; Roth, D A; Alpers, C N; Dileanis, P

    2012-05-01

    The impact of trace elements from the Iron Mountain Superfund site on the Sacramento River and selected tributaries is examined. The concentration and distribution of many trace elements-including aluminum, arsenic, boron, barium, beryllium, bismuth, cadmium, cerium, cobalt, chromium, cesium, copper, dysprosium, erbium, europium, iron, gadolinium, holmium, potassium, lanthanum, lithium, lutetium, manganese, molybdenum, neodymium, nickel, lead, praseodymium, rubidium, rhenium, antimony, selenium, samarium, strontium, terbium, thallium, thulium, uranium, vanadium, tungsten, yttrium, ytterbium, zinc, and zirconium-were measured using a combination of inductively coupled plasma-mass spectrometry and inductively coupled plasma-atomic emission spectrometry. Samples were collected using ultraclean techniques at selected sites in tributaries and the Sacramento River from below Shasta Dam to Freeport, California, at six separate time periods from mid-1996 to mid-1997. Trace-element concentrations in dissolved (ultrafiltered [0.005-μm pore size]) and colloidal material, isolated at each site from large volume samples, are reported. For example, dissolved Zn ranged from 900 μg/L at Spring Creek (Iron Mountain acid mine drainage into Keswick Reservoir) to 0.65 μg/L at the Freeport site on the Sacramento River. Zn associated with colloidal material ranged from 4.3 μg/L (colloid-equivalent concentration) in Spring Creek to 21.8 μg/L at the Colusa site on the Sacramento River. Virtually all of the trace elements exist in Spring Creek in the dissolved form. On entering Keswick Reservoir, the metals are at least partially converted by precipitation or adsorption to the particulate phase. Despite this observation, few of the elements are removed by settling; instead the majority is transported, associated with colloids, downriver, at least to the Bend Bridge site, which is 67 km from Keswick Dam. Most trace elements are strongly associated with the colloid phase going

  5. Anthropogenic rare earth elements and their spatial distributions in the Han River, South Korea.

    Science.gov (United States)

    Song, Hyeongseok; Shin, Woo-Jin; Ryu, Jong-Sik; Shin, Hyung Seon; Chung, Heesun; Lee, Kwang-Sik

    2017-04-01

    Rare earth elements (REE) consist of lanthanides (from La to Lu), together with yttrium and scandium, in which anthropogenic REE, such as gadolinium (Gd), lanthanum (La), and samarium (Sm), has emerged as micro-contaminants in natural waters in highly developed countries. Here, we collected water samples in the Han River (HR) and its tributaries flowing through Seoul Capital Area, the world's second largest metropolitan area in order to examine how and to what extent anthropogenic REE anomalies may occur. Water samples show higher light REE concentrations than heavy REE concentrations, while wastewater treatment plant (WWTP) samples display much higher heavy REE concentrations due to high Gd concentration. The PAAS-normalized REE patterns indicate that WWTP samples display the pronounced positive Gd anomalies, in which anthropogenic Gd from magnetic resonance imaging (MRI) diagnostic system occurs as a form of Gd complexation with either Cl- or SO42-. Due to the WWTP, both the HR and tributaries show also positive Gd anomalies and the anthropogenic Gd concentrations increase as a function of the distance from the Paldang dam. This result indicates a positive correlation between populaton, number of MRI instruments, and positive Gd anomaly. Similarly, positive La and Sm anomalies exist in the HR, indicating that the HR is also affected by their point sources. Based on the discharge rate and anthropogenic REE concentrations, their fluxes are estimated to be 952 ± 319 kg/yr, suggesting that this amount of fluxes could disturb REE distribution in the Yellow Sea, and pose harmful effects on aquatic ecosystems. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Chemical and biological evaluation of {sup 153}Sm and {sup 46/47}Sc complexes of indazolebisphosphonates for targeted radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Neves, Maria, E-mail: mneves@itn.p [Instituto Tecnologico e Nuclear, Sacavem (Portugal); Teixeira, Fatima C.; Antunes, Ines [INETI-Departamento de Tecnologia de Industrias Quimicas, Lisboa (Portugal); Majkowska, Agnieszka [Institute of Nuclear Chemistry and Technology, Warsaw (Poland); Gano, Lurdes [Instituto Tecnologico e Nuclear, Sacavem (Portugal); Santos, Ana Cristina [IBB-Instituto de Biofisica e Biomatematica, Coimbra (Portugal)

    2011-01-15

    Introduction: Novel 1-hydroxy-1,1-bisphosphonates derived from indazole and substituted at the C-3 position were labeled with the radionuclides {sup 46}Sc and {sup 153}Sm. Several parameters such as molar ligand concentration, pH, reaction time and temperature were studied. The radiolabelling yield, reaction kinetics and stability were assessed and radiocomplexes were evaluated by in vitro and in vivo experiments. Methods: The radionuclides {sup 46}Sc and {sup 153}Sm were obtained by neutron irradiation of natural Sc{sub 2}O{sub 3} and enriched {sup 152}Sm{sub 2}O{sub 3} (98.4%) targets at the neutron flux of 3x10{sup 14} n cm{sup -2} s{sup -1}. The radiolabelling yield, reaction kinetics and stability were accomplished by ascending instant thin layer chromatography. The radiocomplexes were submitted to in vitro experiments (hydroxyapatite binding and lipophilicity) and biodistribution studies in animal models. Results: The radionuclides {sup 46}Sc and {sup 153}Sm were produced with specific activities of 100 and 430 MBq mg{sup -1}, respectively. High radiochemical yields were achieved and the hydrophilic radiocomplexes have shown high degree of binding to hydroxyapatite. Biodistribution studies at 1, 3 and 24 h of the 4 radiocomplexes under study, have showed a similar biodistribution profile with a relatively high bone uptake, slow clearance from blood and a very slow rate of total radioactivity excretion from the whole animal body. Conclusion: We have developed a new class of indazolebisphosphonates complexes with radioisotopes of samarium and scandium. All complexes have shown high degree of binding to hydroxyapatite, which could be attributed to the ionized phosphonate groups. The bone uptake and the bone-to-muscle ratios were relatively low.

  7. CW ESR studies on endohedral fullerenes

    Science.gov (United States)

    Bartl, Anton; Dunsch, Lothar; Kirbach, Uwe

    1996-12-01

    Electron spin resonance (ESR) spectroscopy is used in this study in connection with the mass spectrometry one of the most promising method to characterize the state of endohedral fullerenes. The aim of this contribution is to study scandium, yttrium, lanthanum, cerium, praseodymium, samarium, europium, holmium, thulium and lutetium containing fullerenes in dependence on the production and handling conditions with respect to their electronic structure. For the most metallofullerenes both single filled and double filled fullerenes were measured. The mass spectrometric signals of single filled fullerenes are much larger than the signals of double and higher filled metallofullerenes. ESR spectroscopic properties were followed especially in solution of isolated metallofullerenes of high purity characterized by well resolved ESR spectra but also of the solid soot extract resulting in low resolved ESR spectra. In this way new information on the electronic states and the influence of oxygen on endohedral metallofullerene were obtained. The interaction of the lanthanofullerence with oxygen is studied in detail. Different stabilities in different solvents in the presence of oxygen were found for La at C82 molecules. For scandium, yttrium and lanthanum containing fullerenes ESR spectra with hyperfine structure splittings corresponding to the nuclear spin of the metal ion were found. Experiments with lanthanoides results in fullerenes, showing mass spectra with lines equivalent to the corresponding endohedral compounds with single and double filed cages, but no ESR spectra due to the interaction of an unpaired electron with the nuclear spin of the lanthanoide ion could be detected in the magnetic field range of 0 to 800 mT.

  8. Influence on flux density of intraoral dental magnets during 1.5 and 3.0 Tesla MRI; Beeinflussung der Flussdichte intraoraler Dentalmagnete im 1,5 und 3 Tesla-MRT

    Energy Technology Data Exchange (ETDEWEB)

    Blankenstein, F.H.; Peroz, I. [Charite, Berlin (Germany). Charite Centrum 3 - Zahn-, Mund- und Kieferheilkunde; Truong, B. [Zahnarztpraxis Berlin (Germany); Thomas, A. [Charite, Berlin (Germany). Charite Centrum 6 - Diagnostische und Interventionelle Radiologie und Nuklearmedizin; Boeckler, A. [Halle-Wittenberg Univ. (Germany). Zentrum fuer Zahn-, Mund- und Kieferheilkunde

    2011-08-15

    Purpose: When using dental duo-magnet systems, a mini-magnet remains in the jaw after removal of the prosthesis. In some cases, implant-borne magnets may be removed, whereas tooth-borne magnets are irreversibly fixed on a natural tooth root. The goal of this paper is to identify the impacts of the duration and orientation of exposure on these magnets in a 1.5 or 3 Tesla MRI. Materials and Methods: For this study, 30 SmCo and 60 NdFeB magnets were used. During the first experiment, they were exposed with free orientation for 64 minutes. During the second experiment, the magnets were fixed in position and exposed at 1.5 and 3 Tesla while aligned in a parallel or antiparallel direction. Results: While the duration of exposure in MRI is irrelevant, the orientation is not. The coercive field strength of these NdFeB and SmCo alloys is not sufficient to reliably withstand demagnetization in a 1.5 or 3 T MRI when aligned in an antiparallel direction. At 1.5 T neodymium magnets were reduced to approx. 34 % and samarium magnets to approx. 92 % of their initial values. At 3 T all magnets were reversed. Conclusion: As a precaution, the worst-case scenario, i.e. an antiparallel orientation, should be assumed when using a duo-magnet system. If an MRI can be postponed, the general dentist should remove implant-borne magnets. If there is a vital indication, irreversible damage to the magnets is acceptable in consultation with the patient since the replacement costs are irrelevant given the underlying disease. (orig.)

  9. A novel tridentate bis(phosphinic acid)phosphine oxide based europium(III)-selective Nafion membrane luminescent sensor.

    Science.gov (United States)

    Sainz-Gonzalo, F J; Popovici, C; Casimiro, M; Raya-Barón, A; López-Ortiz, F; Fernández, I; Fernández-Sánchez, J F; Fernández-Gutiérrez, A

    2013-10-21

    A new europium(III) membrane luminescent sensor based on a new tridentate bis(phosphinic acid)phosphine oxide (3) system has been developed. The synthesis of this new ligand is described and its full characterization by NMR, IR and elemental analyses is provided. The luminescent complex formed between europium(III) chloride and ligand 3 was evaluated in solution, observing that its spectroscopic and chemical characteristics are excellent for measuring in polymer inclusion membranes. Included in a Nafion membrane, all the parameters (ligand and ionic additives) that can affect the sensitivity and selectivity of the sensing membrane as well as the instrumental conditions were carefully optimized. The best luminescence signal (λexc = 229.06 nm and λem = 616.02 nm) was exhibited by the sensing film having a Nafion : ligand composition of 262.3 : 0.6 mg mL(-1). The membrane sensor showed a short response time (t95 = 5.0 ± 0.2 min) and an optimum working pH of 5.0 (25 mM acetate buffer solution). The membrane sensor manifested a good selectivity toward europium(III) ions with respect to other trivalent metals (iron, chromium and aluminium) and lanthanide(III) ions (lanthanum, samarium, terbium and ytterbium), although a small positive interference of terbium(III) ions was observed. It provided a linear range from 1.9 × 10(-8) to 5.0 × 10(-6) M with a very low detection limit (5.8 × 10(-9) M) and sensitivity (8.57 × 10(-7) a.u. per M). The applicability of this sensing film has been demonstrated by analyzing different kinds of spiked water samples obtaining recovery percentages of 95-97%.

  10. Magnetic and electrical studies on La{sub 0.4}Sm{sub 0.1}Ca{sub 0.5}MnO{sub 3} charge ordered manganite

    Energy Technology Data Exchange (ETDEWEB)

    Krichene, A., E-mail: akramkri@hotmail.fr [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Université de Sfax, B. P. 1171, 3000 Sfax (Tunisia); Solanki, P.S. [Department of Physics, Saurashtra University, Rajkot 360005 (India); Venkateshwarlu, D. [UGC-DAE Consortium for Scientific Research, University Campus, Khandwa Road, Indore 452017 (India); Rayaprol, S. [UGC-DAE Consortium for Scientific Research, Mumbai Centre, B.A.R.C. Campus, Mumbai 400085 (India); Ganesan, V. [UGC-DAE Consortium for Scientific Research, University Campus, Khandwa Road, Indore 452017 (India); Boujelben, W. [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Université de Sfax, B. P. 1171, 3000 Sfax (Tunisia); Kuberkar, D.G. [Department of Physics, Saurashtra University, Rajkot 360005 (India)

    2015-05-01

    We have reported in this work the effect of the partial substitution of lanthanum by samarium on the structural, electrical and magnetic properties of La{sub 0.5}Ca{sub 0.5}MnO{sub 3}. The magnetic study indicated that substitution promotes charge ordering and weakens ferromagnetism. Below T{sub C}=123 K, the compound La{sub 0.4}Sm{sub 0.1}Ca{sub 0.5}MnO{sub 3} is a mixture of ferromagnetic and charge ordered antiferromagnetic domains. Between T{sub C} and T{sub CO}=215 K, the structure is paramagnetic with the presence of antiferromagnetic domains. The fractions of the coexisting magnetic phases are highly dependent on the applied magnetic field value. Resistivity measurements reveal the presence of an insulating-metal transition at T{sub ρ}=123 K. The equality between T{sub C} and T{sub ρ} indicates the presence of a correlation between magnetization and resistivity. For only 1 T applied field, we have reported a colossal value of magnetoresistance reaching 73% around T{sub C}. The origin of this high value is attributed to phase separation phenomenon. - Highlights: • Sm doping enhances charge ordering and weakens ferromagnetism in La{sub 0.5}Ca{sub 0.5}MnO{sub 3.} • Colossal magnetoresistance (73%) is recorded at 123 K for only 1 T applied field. • Phase separation is responsible for the magnetic and the magnetoresistive behavior.

  11. How Do Rare Earth Elements (Lanthanoids Affect Root Development and Protocorm-Like Body Formation in Hybrid CYMBIDIUM?

    Directory of Open Access Journals (Sweden)

    Teixeira da Silva Jaime A.

    2014-09-01

    Full Text Available Only few studies in the plant tissue culture literature have examined the impact of lanthanoids, or rare earth elements, on in vitro plant organogenesis. In this study, using a model plant, hybrid Cymbidium Twilight Moon ‘Day Light’, the impact of six lanthanoids (lanthanum (III nitrate hexahydrate (La(NO33 · 6H2O, cerium (III nitrate hexahydrate (Ce(NO33 · 6H2O, neodymium (III nitrate hexahydrate (Nd(NO33 · 6H2O, praseodymium (III nitrate hexahydrate (Pr(NO33 · 6H2O, samarium (III nitrate hexahydrate (Sm(NO33 · 6H2O, gadolinium (III nitrate hexahydrate (Gd(NO33 · 6H2O on new protocorm-like body (neo-PLB formation on Teixeira Cymbidium (TC medium was examined. 0 (control, 1, 2, 4 and 8 mg·dm-3 of each lanthanoid was tested. All lanthanoids could produce more neo-PLBs and neo-PLB fresh weight than TC medium lacking plant growth regulators (PGRs, suggesting some PGR-like ability of lanthanoids, although PLB-related traits (percentage of half-PLBs forming neo-PLBs; number of neo-PLBs formed per half-PLB; fresh weight of half-PLB + neo-PLBs was always significantly lower than TC medium containing PGRs. Except for Gd, all other lanthanoids had no negative impact on the number of new leaves from neo-PLB-derived shoots, but all lanthanoids showed a significantly lower plant height, shoot fresh weight and shoot dry weight and, in most cases, SPAD (chlorophyll content value. In addition, using the same concentration of the six lanthanoids, the ability to fortify root formation of neo-PLB-derived plantlets was also assessed. Except for Sm, all other lanthanoids significantly increased the number of roots, root fresh and dry weight.

  12. Three-dimensional modeling and virtual TRIGA reconfigure for specialized training; Modelado 3D y TRIGA virtual reconfigurable para entrenamiento especializado

    Energy Technology Data Exchange (ETDEWEB)

    Plata M, A. C.; Morales S, J. B.; Flores, M. [Facultad de Ingenieria, Division de Estudios de Posgrado, Campus Morelos, UNAM, Paseo Cuauhnahuac 8532, Col. Progreso, 62550 Jiutepec, Morelos (Mexico)], e-mail: yoyuclof@hotmail.com

    2009-10-15

    The news products that have been realized for the training virtual room which is developing in the Engineering Faculty of National Autonomous University of Mexico are presented. These improvements are mainly in modeling of virtual reality of the reactor building, as well as internal parts of reactor. It was modified the dynamic modeling of control rods of reaction in chain and included new elements to reactor. which exist not necessarily in all the TRIGA, but that, for educational purposes are highly useful. Such is the case of addition of valves, pumps, tanks, injection lines of light or borated water, as well as a heat exchanger, with it can recycle only pool water from side to other, or to extract energy toward a secondary controller from the operator console. The models of heat decay were included, of subcooled and nucleated boiling of coolant-moderator in the core, the dynamics of xenon and samarium. These last with independent multipliers of simulation time to allow variations very fast that real time. All these additions modify the coolant-moderator characteristics and consequently the answer of simulator. The controls are separated in: an operator console (student) very similar to the real systems, another of instructor that has additional access to parameters not directly measurement in the facilities but that allow to modify the system to illustrate another not easily possible effects in the real system. The traveling crane is also modeled and is controlled in a third console from where can to replacement to reactor as well as to add or to replacement: intakes and discharges of coolant circulators, measuring instruments, reflectors and neutron sources. The dynamic models have been tested in SCILAB and SCICOS. At present is working in the integration of the dynamic simulator and the virtual reality mainly with the design requirement of allowing functions of increased reality. (Author)

  13. Effects of nanostructuring on luminescence properties of SrS:Ce,Sm phosphor: An experimental and phenomenological study

    Science.gov (United States)

    Yazdanmehr, Mohsen; Sadeghi, Hossein; Tehrani, Masoud Kavosh; Hashemifar, Seyed Javad; Mahdavi, Mohammad

    2018-01-01

    In this work, we employ various experimental techniques to illustrate the effects of nanostructuring on improvement of the luminescence properties of the polycrystalline SrS co-activated by cerium and samarium dopants (SrS : Ce , Sm). The nano and microstructure SrS : Ce , Sm powders were synthesized by the co-precipitation and solid state diffusion methods, respectively, followed by the spark plasma sintering (SPS) process to densify powders into pellet shape. It is observed that the photo-luminescence (PL), radio-luminescence (RL), and optically stimulated luminescence (OSL) emission intensity of the nanostructure samples are significantly improved with respect to the microstructure samples. Moreover, by using an accurate photomultiplier tube, we measured the CW-OSL decay curves of the samples to demonstrate much higher and faster sensitivity of the nanostructure SrS : Ce , Sm for in-flight and online OSL radiation dosimetry. The obtained absorption and emission spectra are used for phenomenology of the electronic band structure of the SrS : Ce , Sm micro and nano-phosphors inside the band gap. The proposed phenomenological electronic structures are then used to clarify the role of Ce3+ and Sm3+ localized energy levels in the luminescence properties of the nano and microstructure samples. It is argued that electronic transitions from the 2T2g state of Ce3+ and the 4G5/2 state of Sm3+ have strong contribution to the PL and RL emission spectra, while in the OSL mechanism, the Sm3+ 4G5/2 state is mainly responsible for electrons trapping.

  14. Domestic wastewater treatment using Pt,Ni-RE (rare earth electrodes

    Directory of Open Access Journals (Sweden)

    Eurico Moutinho

    2016-11-01

    Full Text Available Electrochemical technologies can be used for the treatment of domestic wastewaters, by eliminating their organic pollutants. They have advantages over conventional methods, such as environmental compatibility, versatility, energy efficiency, safety and cost. The organic compounds degradation process is based on the production of OH radicals, formed during water electrolysis, which oxidize the organic molecules to CO2. At the same time, hydrogen (H2 is produced through reduction of the water in the effluent, which can be later used in a fuel cell. Present study seeks to find effective electrocatalysts to produce H2 by electrolysis, using domestic wastewaters as the hydrogen source, with or without the addition of supporting electrolyte. Herein KOH is used as the supporting electrolyte, as the extra hydroxide can be used to degrade the organic matter. Nine different electrode materials are evaluated as cathodes for the hydrogen evolution reaction (HER in a domestic wastewater. The tested materials include platinum (Pt and platinum-rare earth (Pt-RE binary alloys, and nickel (Ni and Ni-RE alloys, with the REs being cerium (Ce, samarium (Sm, dysprosium (Dy, and holmium (Ho. Linear scan voltammetry measurements are conducted at temperatures ranging from 25 to 85 ºC. Several kinetic parameters are calculated, such as the Tafel slopes, charge transfer coefficients and exchange current densities. The data obtained at the different electrode materials is compared and it is clear that Pt-RE alloys show superior activity for the HER. It is also noticeable that the wastewater effluent containing the supporting electrolyte leads to significantly better HER performances.

  15. Radioactive isotope production for medical applications using Kharkov electron driven subcritical assembly facility.

    Energy Technology Data Exchange (ETDEWEB)

    Talamo, A.; Gohar, Y.; Nuclear Engineering Division

    2007-05-15

    , the parent isotopes with high reaction rate were explicitly modeled in the calculations. For the nuclides with a very high capture microscopic cross section, such as iridium, rhenium, and samarium, their specific activities are reduced by a factor of 30 when the self-shielding effect is included. Four irradiation locations were considered in the analyses to maximize the medical isotope production rate. The results show the self-shield effect reduces the specific activity values and changes the irradiation location for obtaining the maximum possible specific activity. The axial and radial distributions of the specific activity were used to define the irradiation sample size for producing each isotope.

  16. Luminescence properties of Sm(3+)-doped P(2)O(5)-PbO-Nb(2)O(5) glass under high pressure.

    Science.gov (United States)

    Praveena, R; Venkatramu, V; Babu, P; Jayasankar, C K; Tröster, Th; Sievers, W; Wortmann, G

    2009-01-21

    Samarium doped lead phosphate glass modified with niobium having a composition (in mol%) of 55P(2)O(5)+39.5PbO+5Nb(2)O(5)+0.5Sm(2)O(3) has been prepared by the conventional melt quenching technique. The emission spectra and the decay curves for the (4)G(5/2) level of Sm(3+) ions have been measured as a function of pressure up to 23.6 GPa at room temperature. A discontinuity in the observed shifts and crystal-field splittings as a function of pressure around 9-10 GPa suggests that a phase transition is taking place in the glass matrix. The [Formula: see text], (6)H(7/2) and (6)H(9/2) transitions are shifted towards the lower energy side with magnitudes of -7.1, -7.6 and -5.5 cm(-1) GPa(-1) up to 8.9 GPa (phase 1) and -5.6, -4.9 and -4.4 cm(-1) GPa(-1) beyond 10.3 GPa (phase 2), respectively. A much stronger increase in the splitting of the [Formula: see text] and [Formula: see text] Stark levels with pressure is observed in phase 1 than in phase 2. The lifetime of the (4)G(5/2) level decreases from 2.29 ms (0 GPa) to 0.64 ms (23.6 GPa) with pressure. The decay curves of the (4)G(5/2) level exhibit non-exponential behavior for all the pressures and were fitted by the generalized Yokota-Tanimoto model to probe the nature of the energy transfer process. The best fits with S = 6 indicate that the energy transfer between donor and acceptor is of dipole-dipole type. The crystal-field splitting experienced by the Sm(3+) ions in the title glass are found to be larger than those found in borate, K-Ba-Al phosphate and tellurite glasses.

  17. Barium halide nanocrystals in fluorozirconate based glass ceramics for scintillation application

    Energy Technology Data Exchange (ETDEWEB)

    Selling, J.

    2007-07-01

    Europium (Eu)-activated barium halide nanocrystals in fluorozirconate based glass ceramics represent a promising class of Xray scintillators. The scintillation in these glass ceramics is mainly caused by the emission of divalent Eu incorporated in hexagonal BaCl{sub 2} nanocrystals which are formed in the glass matrix upon appropriate annealing. Experiments with cerium (Ce)-activated fluorozironate glass ceramics showed that Ce is an interesting alternative. In order to get a better understanding of the scintillation mechanism in Eu- or Ce-activated barium halide nanocrystals, an investigation of the processes in the corresponding bulk material is essential. The objective of this thesis is the investigation of undoped, Eu-, and Ce-doped barium halides by X-ray excited luminescence (XL), pulse height, and scintillation decay spectra. That will help to figure out which of these crystals has the most promising scintillation properties and would be the best nanoparticles for the glass ceramics. Furthermore, alternative dopants like samarium (Sm) and manganese (Mn) were also investigated. Besides the above-mentioned optical investigation electron paramagnetic resonance (EPR) and Moessbauer measurements were carried out in order to complete the picture of Eu-doped barium halides. The EPR data of Eu-doped BaI{sub 2} is anticipated to yield more information about the crystal field and crystal structure that will help to understand the charge carrier process during the scintillation process. The main focus of the Moessbauer investigations was set on the Eu-doped fluorochlorozirconate glass ceramics. The results of this investigation should help to improve the glass ceramics. The Eu{sup 2+}/Eu{sup 3+} ratio in the glass ceramics should be determined and optimize favor of the Eu{sup 2+}. We also want to distinguish between Eu{sup 2+} in the glass matrix and Eu{sup 2+} in the nanocrystals. For a better understanding of Moessbauer spectroscopy on Eu also measurements on Eu in a

  18. Electrochemical impedance spectroscopy of mixed conductors under a chemical potential gradient: a case study of Pt|SDC|BSCF.

    Science.gov (United States)

    Lai, Wei; Haile, Sossina M

    2008-02-14

    The AC impedance response of mixed ionic and electronic conductors (MIECs) exposed to a chemical potential gradient is derived from first principles. In such a system, the chemical potential gradient induces a gradient in the carrier concentration. For the particular system considered, 15% samarium doped ceria (SDC15) with Ba(0.5)Sr(0.5)Co(0.8)Fe(0.2)O(3-delta) (BSCF) and Pt electrodes, the oxygen vacancy concentration is a constant under the experimental conditions and it is the electron concentration that varies. The resulting equations are mapped to an equivalent circuit that bears some resemblance to recently discussed equivalent circuit models for MIECs under uniform chemical potential conditions, but differs in that active elements, specifically, voltage-controlled current sources, occur. It is shown that from a combination of open circuit voltage measurements and AC impedance spectroscopy, it is possible to use this model to determine the oxygen partial pressure drop that occurs between the gas phase in the electrode chambers and the electrode|electrolyte interface, as well as the interfacial polarization resistance. As discussed in detail, this resistance corresponds to the slope of the interfacial polarization curve. Measurements were carried out at temperatures between 550 and 650 degrees C and oxygen partial pressure at the Pt anode ranging from 10(-29) to 10(-24) atm (attained using H(2)/H(2)O/Ar mixtures), while the cathode was exposed to either synthetic air or neat oxygen. The oxygen partial pressure drop at the anode was typically about five orders of magnitude, whereas that at the cathode was about 0.1 atm for measurements using air. Accordingly, the poor activity of the anode is responsible for a loss in open circuit voltage of about 0.22 V, whereas the cathode is responsible for only about 0.01 V, reflecting the high activity of BSCF for oxygen electro-reduction. The interfacial polarization resistance at the anode displayed dependences on oxygen

  19. Synthesis and characterization of novel Ce{sub 0.8}Sm{sub 0.2}Fe{sub 0.9}Ir{sub 0.03}Co{sub 0.07}O{sub 3−δ} perovskite material and possible application as a cathode for low–intermediate temperature SOFCs

    Energy Technology Data Exchange (ETDEWEB)

    Njoku, Chima Benjamin; Ndungu, Patrick Gathura, E-mail: ndungup@ukzn.ac.za

    2015-08-15

    Highlights: • Ce{sub 0.8}Sm{sub 0.2}Fe{sub 0.9}Ir{sub 0.03}Co{sub 0.07}O{sub 3−δ} was synthesized using sol–gel methods. • Material was thoroughly characterized using Raman, FTIR, XRD, HRTEM, SEM, and TGA. • Electrochemical performance showed the materials are a promising new cathode material for low temperature SOFC. - Abstract: A novel perovskite material, Ce{sub 0.8}Sm{sub 0.2}Fe{sub 0.9}Ir{sub 0.03}Co{sub 0.07}O{sub 3−δ} was synthesized using a sol–gel technique. The materials were calcined at temperatures of 800 °C, 900 °C, and 1000 °C and then characterized using X-ray diffraction, Raman and infrared spectroscopy, high resolution transmission electron microscopy and scanning electron microscopy (SEM). The particle sizes and crystallite sizes increased with increasing calcination temperature and formed perovskite type materials with some separate magnetite and iridium oxide. The powders were used to assemble button cells using samarium doped ceria as the electrolyte and NiO/SDC as the anode materials. The electrochemical properties were investigated using a Fiaxell open flanges test set-up and a Nuvant™ Powerstat-05 potentiostat/galvanostat. The Ce{sub 0.8}Sm{sub 0.2}Fe{sub 0.9}Ir{sub 0.03}Co{sub 0.07}O{sub 3−δ} cathode material calcined at 1000 °C exhibited the most promising performance, with a maximum power density of 0.400 W/cm{sup 2}, a current density of 0.8 A/cm{sup 2}, and a corresponding area specific resistance of 0.247 Ωcm{sup 2} at 500 °C. The button cells were reasonably stable over15 h.

  20. Gastrointestinal behavior of orally administered radiolabeled erythromycin pellets in man as determined by gamma scintigraphy.

    Science.gov (United States)

    Digenis, G A; Sandefer, E P; Parr, A F; Beihn, R; McClain, C; Scheinthal, B M; Ghebre-Sellassie, I; Iyer, U; Nesbitt, R U; Randinitis, E

    1990-07-01

    The behavior of single 250-mg doses of a multiparticulate form of erythromycin base (ERYC(R)), each including five pellets radiolabeled with neutron-activated samarium-153, was observed by gamma scintigraphy in seven male subjects under fasting and nonfasting conditions. The residence time and locus of radiolabeled pellets within regions of the gastrointestinal tract were determined and were correlated with plasma concentrations of erythromycin at coincident time points. Administration of food 30 minutes postdosing reduced fasting plasma erythromycin Cmax and area under the plasma erythromycin versus time curve (AUC) values by 43% and 54%, respectively. Mean peak plasma concentration of erythromycin (Cmax) in the fasting state was 1.64 micrograms/mL versus 0.94 micrograms/mL in the nonfasting state. Total oral bioavailability, as determined by mean AUC (0-infinity) of the plasma erythromycin concentration versus time curve, was 7.6 hr/micrograms/mL in the fasted state, versus 3.5 hr/micrograms/mL in the nonfasting state. Mean time to peak plasma erythromycin concentration (tmax) in the fasting state was 3.3 hours, versus 2.3 hours in the nonfasting state. Plasma concentrations of erythromycin in both fasting and nonfasting states were within acceptable therapeutic ranges. Evidence provided by this study: 1) indicates that pellet erosion and absorption of active erythromycin base begins when the enteric-coated pellets reach the highly vascular mucosa of the jejunum and proximal ileum, and is essentially completed within the ileum, with a significant portion absorbed in the medial-to-distal ileum; 2) confirms that acceptable therapeutic plasma levels of erythromycin are attained in nonfasting subjects (Cmax = 0.94 microgram/mL) and that superior plasma erythromycin concentrations (Cmax = 1.64 micrograms/mL) are achieved by administration of the dose on an empty stomach 1 to 2 hours before or after meals; 3) corroborates other comparative studies reporting greater

  1. Thermal Analysis of Surrogate Simulated Molten Salts with Metal Chloride Impurities for Electrorefining Used Nuclear Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Toni Y. Gutknecht; Guy L. Fredrickson; Vivek Utgikar

    2012-04-01

    This project is a fundamental study to measure thermal properties (liquidus, solidus, phase transformation, and enthalpy) of molten salt systems of interest to electrorefining operations, which are used in both the fuel cycle research & development mission and the spent fuel treatment mission of the Department of Energy. During electrorefining operations the electrolyte accumulates elements more active than uranium (transuranics, fission products and bond sodium). The accumulation needs to be closely monitored because the thermal properties of the electrolyte will change as the concentration of the impurities increases. During electrorefining (processing techniques used at the Idaho National Laboratory to separate uranium from spent nuclear fuel) it is important for the electrolyte to remain in a homogeneous liquid phase for operational safeguard and criticality reasons. The phase stability of molten salts in an electrorefiner may be adversely affected by the buildup of fission products in the electrolyte. Potential situations that need to be avoided are: (i) build up of fissile elements in the salt approaching the criticality limits specified for the vessel (ii) freezing of the salts due to change in the liquidus temperature and (iii) phase separation (non-homogenous solution) of elements. The stability (and homogeneity) of the phases can potentially be monitored through the thermal characterization of the salts, which can be a function of impurity concentration. This work describes the experimental results of typical salts compositions, consisting of chlorides of strontium, samarium, praseodymium, lanthanum, barium, cerium, cesium, neodymium, sodium and gadolinium (as a surrogate for both uranium and plutonium), used in the processing of used nuclear fuels. Differential scanning calorimetry was used to analyze numerous salt samples providing results on the thermal properties. The property of most interest to pyroprocessing is the liquidus temperature. It was

  2. Formation of gapless Z 2 spin liquid phase manganites in the (Sm1- y Gd y )0.55Sr0.45MnO3 system in zero magnetic field: Topological phase transitions to states with low and high density of 2D-vortex pairs induced by the magnetic field

    Science.gov (United States)

    Bukhan'ko, F. N.; Bukhan'ko, A. F.

    2017-12-01

    The evolution of the ground state of the manganese spin ensemble in the (Sm1- y Gd y )0.55Sr0.45MnO3 in the case of isovalent substitution of rare-earth samarium ions with large radii with gadolinium ions with significantly smaller radii is studied. The measured temperature dependences of the ac magnetic susceptibility and the field dependences of the dc magnetizations are analyzed using the Heisenberg-Kitaev model describing the transition from the ordered spin state with classical isotropic AFM exchange to the frustrated spin state with quantum highly anisotropic FM exchange. A continuous transition from the 3D ferromagnetic state of manganese spins in the initial sample with y = 0 to zigzag AFM ordering of CE-type spins in ab planes for y = 0.5, coexisting in samples with y = 0.5, 0.6, and 0.7 at temperatures below T N ≅ 48.5 K with a disordered phase such as a quantum Griffiths phase is identified. As the gadolinium concentration further increases, the CE-type zigzag AFM structure is molten, which leads to the appearance of an unusual phase in Gd0.55Sr0.45MnO3 in the temperature range close to the absolute zero. This phase has characteristic features of a gapless Z 2 quantum spin liquid in zero external magnetic field. The step changes in the magnetization isotherms measured at 4.2 K in the field range of ±75 kOe are explained by quantum phase transitions of the Z 2 spin liquid to a phase with topological order in weak magnetic fields and a polarized phase in strong fields. The significant difference between critical fields and magnetization jumps in isotherms indicates the existence of hysteretic phenomena in quantum spin liquid magnetization-demagnetization processes caused by the difference between localization-delocalization of 2D vortex pairs induced by a magnetic field in a quantum spin liquid with disorder.

  3. Anomalous high pressure behaviour in nanosized rare earth sesquioxides

    Energy Technology Data Exchange (ETDEWEB)

    Dilawar, Nita; Varandani, Deepak; Mehrotra, Shalini; Bandyopadhyay, Ashis K [Pressure and Vacuum Standards, National Physical Laboratory, Dr K S Krishnan Road, New Delhi 110012 (India); Poswal, Himanshu K; Sharma, Surinder M [High Pressure Physics Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)

    2008-03-19

    We report Raman spectroscopic studies of the nanosized rare earth sesquioxides, namely yttrium sesquioxide (Y{sub 2}O{sub 3}), gadolinium sesquioxide (Gd{sub 2}O{sub 3}) and samarium sesquioxide (Sm{sub 2}O{sub 3}), under high pressure. The samples were characterized using x-ray diffraction, Raman spectroscopy and atomic force microscopy at atmospheric pressures. Y{sub 2}O{sub 3} and Gd{sub 2}O{sub 3} were found to be cubic at ambient, while Sm{sub 2}O{sub 3} was found to be predominantly cubic with a small fraction of monoclinic phase. The strongest Raman peaks are observed at 379, 344 and 363 cm{sup -1}, respectively, for Y{sub 2}O{sub 3}, Sm{sub 2}O{sub 3} and Gd{sub 2}O{sub 3}. All the samples were found to be nanosized with 50-90 nm particle sizes. The high pressures were generated using a Mao-Bell type diamond anvil cell and a conventional laser Raman spectrometer is used to monitor the pressure-induced changes. Y{sub 2}O{sub 3} seems to undergo a crystalline to partial amorphous transition when pressurized up to about 19 GPa, with traces of hexagonal phase. However, on release of pressure, the hexagonal phase develops into the dominant phase. Gd{sub 2}O{sub 3} is also seen to develop into a mixture of amorphous and hexagonal phases on pressurizing. However, on release of pressure Gd{sub 2}O{sub 3} does not show any change and the transformation is found to be irreversible. On the other hand, Sm{sub 2}O{sub 3} shows a weakening of cubic phase peaks while monoclinic phase peaks gain intensity up to about a pressure of 6.79 GPa. However, thereafter the monoclinic phase peaks also reduce in intensity and mostly disordering sets in which does not show significant reversal as the pressure is released. The results obtained are discussed in detail.

  4. Development of radiolanthanide labeled porphyrin complexes as possible therapeutic agents in beast carcinoma xenografts

    Energy Technology Data Exchange (ETDEWEB)

    Vahidfar, Nasim; Aghanejad, Ayuob; Beiki, Davood; Khalaj, Ali [Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of). Faculty of Pharmacy; Jalilian, Amir R.; Fazaeli, Yousef; Bahrami-Samani, Ali; Alirezapour, Behrooz; Erfani, Mostafa [Nuclear Science and Technology Research Institute, Tehran (Iran, Islamic Republic of). Radiopharmacy Research Group

    2014-10-01

    Radiolabeled porphyrins are potential tumor avid radiopharmaceuticals because of their behaviour in the human body, ability to complex various radionuclides, water solubility, low toxicity etc., in this work radio ytterbium/samarium porphyrin complexes have been developed. {sup 175}Yb and {sup 153}Sm labeled 5,10,15,20-tetrakis(3,4-dimethoxyphenyl) porphyrins ([{sup 175}Yb]-TDMPP/[{sup 153}Sm]-TDMPP) were prepared using 5,10,15,20-tetrakis(3,4-dimethoxyphenyl) porphyrin (H{sub 2}TDMPP) and [{sup 175}Yb]YbCl{sub 3} or [{sup 153}Sm]SmCl{sub 3} in 12-24 h at 60 C. Stability of the complexes were checked in final formulation and human serum for 24 h, followed by partition coefficient determination and biodistribution studies in wild type and breast carcinoma-bearing mice. The radiocomplexes were obtained with acceptable radiochemical purity (> 95% (paper chromatography) and > 96% (HPLC) for [{sup 175}Yb]-TDMPP and > 97% (paper chromatography) and > 98% (HPLC) for [{sup 153}Sm]-TDMPP) with specific activities of 12-15 GBq/mmol and 278 GBq/mmol at the end of bombardment for [{sup 175}Yb]-TDMPP and [{sup 153}Sm]-TDMPP respectively. The partition coefficients were determined for [{sup 175}Yb]-TDMPP and [{sup 153}Sm]-TDMPP (log P = 0.63 and log P = 0.96 respectively). The [{sup 175}Yb]-TDMPP complex is mostly washed out from the circulation through kidneys. Liver and spleen also demonstrated significant activity uptake in 72 h post injection. Also [{sup 153}Sm]-TDMPP, is mostly washed out from the circulation through kidneys, however lungs are the major accumulation sites. The [{sup 153}Sm]-TDMPP complex demonstrated significant targeted uptake in breast carcinoma xenografts with tumor: blood ratios of 10.67, 10.47 and 19.01 in 24, 48 and 72 h respectively. Also interesting tumor: kidney/liver ratios were obtained. {sup 153}Sm-TDMPP properties suggest an efficient tumor targeting agent with high tumor-avidity. Further investigation on the therapeutic properties must be

  5. Growth, mechanical, and magnetic study of SmFeO{sub 3} single crystal grown by optical floating zone technique

    Energy Technology Data Exchange (ETDEWEB)

    Babu, P. Ramesh [Centre for Crystal Growth, VIT University, Vellore, Tamil Nadu (India); Bhaumik, Indranil [Crystal Growth Laboratory, Laser Materials Development and Devices Division, RRCAT, Indore (India); Ganesamoorthy, S. [Material Science Group, IGCAR, Kalpakkam, Tamil Nadu (India); Kalainathan, S., E-mail: kalainathan@yahoo.com [Centre for Crystal Growth, VIT University, Vellore, Tamil Nadu (India); Bhatt, R.; Karnal, A.K.; Gupta, P.K. [Crystal Growth Laboratory, Laser Materials Development and Devices Division, RRCAT, Indore (India)

    2016-08-15

    Single crystals of Samarium orthoferrite (SmFeO{sub 3}) have been grown by the optical floating zone technique. The growth parameters to yield good quality crystals are 5 mm/h for pulling and 30–40 rpm for rotation. The mechanical behavior of the grown crystal has been investigated. Rosette pattern has been observed around the indentation and the microhardness has been found to decreases non-linearly with the applied load. For load higher than 1.96 N there is a transition from palmqvist to median crack due to plastic deformation of the crystal. The hardness parameters like fracture toughness, brittleness index, and yield strength have also been calculated for palmqvist and median cracks occurring on the crystal surface. The magnetic investigations revealed that a magnetic transition in the range of 300–180 K. Above 180 K, the magnetization decreases as Sm and Fe sublattices have opposite spins. At high temperature, two anomalies are observed, one due to near spin reorientation (T{sub SR} = 480 K) and the other is AFM to paramagnetic transitions (T{sub N} = 670 K). The M–H curves exhibit a shape change with temperature due to the emergence and enlargement of multi-domain state of the SmFeO{sub 3} crystals. Bloch parameter (3.28 × 10{sup −5} K{sup −3/2}) has also been evaluated. - Highlights: • SmFeO{sub 3} single crystals have been grown by OFZ technique in air. • The microhardness has been found to decreases non-linearly with the applied load. • At 472 K, spin reorientation occurs in Fe sublattice. • The M–H curves exhibit a shape change with temperature due to the emergence and enlargement of multi-domain state. • Bloch 3/2-law holds good for SmFeO{sub 3} (B-parameter as 3.28 × 10{sup −5} K{sup −3/2}).

  6. Effect of Bi2O3 on the structural and spectroscopic properties of Sm3+ ions doped sodiumfluoroborate glasses

    Science.gov (United States)

    Mariyappan, M.; Arunkumar, S.; Marimuthu, K.

    2016-02-01

    Trivalent samarium ions doped bismuth sodiumfluoroborate glasses have been prepared with the chemical composition 40B2O3+(40-x)Na2CO3+xBi2O3+19CaF2+1Sm2O3 (where x = 0, 10, 20, 30 and 40 in wt%) following the conventional melt quenching technique. The structural and spectroscopic characterizations have been carried out using XRD, FTIR and UV-Vis-NIR, luminescence and decay measurements. Judd-Ofelt (JO) theory has been used to study the effect of local field environment around the Sm3+ ion site to calculate the radiative properties. Bonding parameters and JO intensity parameters (Ω2, Ω4, Ω6) were determined from the absorption spectra to explore the nature of bonding and symmetry around the Sm3+ ion site. The spectroscopic quality factor (χ = Ω4/Ω6) and asymmetry ratio (R/O) have been determined to elucidate the potential strength of the stimulated emission and asymmetry around the Sm3+ ion site in the prepared glasses. Using JO theory, various radiative properties like transition probability (A), effective bandwidth (Δλeff), stimulated emission cross-section (σpE) and branching ratio (βR) for the 4G5/2 → 6H5/2, 6H7/2, 6H9/2 emission levels of the prepared glasses were determined and compared with the reported literature. The decay curves corresponding to the 4G5/2 level of the Sm3+ ions were measured and are found to be single exponential for lower Bi2O3 content and turn to become non-exponential for higher Bi2O3 content and is due to the donor to acceptor energy transfer through cross-relaxation process. Among the prepared glasses, 40BiNFBS glass exhibit higher A, βR, σpE and η values and is suggested for useful gain medium and reddish orange laser applications.

  7. International strategic minerals inventory summary report; rare-earth oxides

    Science.gov (United States)

    Jackson, W.D.; Christiansen, Grey

    1993-01-01

    Bastnaesite, monazite, and xenotime are currently the most important rare-earth minerals. Bastnaesite occurs as a primary mineral in carbonatites. Monazite and xenotime also can be found in primary deposits but are recovered principally from heavy-mineral placers that are mined for titanium or tin. Each of these minerals has a different composition of the 15 rare-earth elements. World resources of economically exploitable rare-earth oxides (REO) are estimated at 93.4 million metric tons in place, composed of 93 percent in primary deposits and 7 percent in placers. The average mineral composition is 83 percent bastnaesite, 13 percent monazite, and 4 percent of 10 other minerals. Annual global production is about 67,000 metric tons of which 41 percent is from placers and 59 percent is from primary deposits; mining methods consist of open pits (94 percent) and dredging (6 percent). This output could be doubled if the operations that do not currently recover rare earths would do so. Resources are more than sufficient to meet the demand for the predictable future. About 52 percent of the world's REO resources are located in China. Ranking of other countries is as follows: Namibia (22 percent), the United States (15 percent), Australia (6 percent), and India (3 percent); the remainder is in several other countries. Conversely, 38 percent of the production is in China, 33 percent in the United States, 12 percent in Australia, and 5 percent each in Malaysia and India. Several other countries, including Brazil, Canada, South Africa, Sri Lanka, and Thailand, make up the remainder. Markets for rare earths are mainly in the metallurgical, magnet, ceramic, electronic, chemical, and optical industries. Rare earths improve the physical and rolling properties of iron and steel and add corrosion resistance and strength to structural members at high temperatures. Samarium and neodymium are used in lightweight, powerful magnets for electric motors. Cerium and yttrium increase the

  8. Phase and structural behavior of SmAlO{sub 3}–RAlO{sub 3} (R = Eu, Gd) systems

    Energy Technology Data Exchange (ETDEWEB)

    Ohon, N. [Lviv Polytechnic National University, 12 Bandera Street, 79013 Lviv (Ukraine); Vasylechko, L., E-mail: crystal-lov@polynet.lviv.ua [Lviv Polytechnic National University, 12 Bandera Street, 79013 Lviv (Ukraine); Prots, Yu.; Schmidt, M. [Max-Planck-Institut für Chemische Physik fester Stoffe, Nöthnitzer Str. 40, 01187 Dresden (Germany)

    2014-02-01

    Highlights: • Continuous solid solutions exist in the SmAlO{sub 3}–RAlO{sub 3} (R = Eu, Gd) systems. • Lattice parameter crossover was found in solid solutions Sm{sub 1−x}R{sub x}AlO{sub 3} (R = Eu, Gd). • Thermally induced lattice crossovers occur in Sm{sub 0.9}R{sub 0.1}AlO{sub 3} at elevated temperatures. • First-order structural phase transition Pbnm↔R3{sup ¯}c was found in Sm{sub 1−x}R{sub x}AlO{sub 3} (R = Eu, Gd). • Phase diagram of the systems SmAlO{sub 3}–EuAlO{sub 3} and SmAlO{sub 3}–GdAlO{sub 3} has been constructed. - Abstract: Phase and structural behavior in the SmAlO{sub 3}–RAlO{sub 3} (R = Eu, Gd) systems has been studied in a whole concentration range by means of laboratory X-ray diffraction, in situ synchrotron powder diffraction and differential thermal analysis techniques. Continuous solid solutions with orthorhombic perovskite structure have been found in both systems. Peculiarity of the solid solutions of Sm{sub 1−x}Eu{sub x}AlO{sub 3} and Sm{sub 1−x}Gd{sub x}AlO{sub 3} is the existence of two lattice parameter crossovers in each system occurred at x{sub Eu} = 0.07 and 0.62 and at x{sub Gd} = 0.04 and 0.33, respectively. The temperature induced lattice crossovers in the Sm{sub 0.9}Eu{sub 0.1}AlO{sub 3} and Sm{sub 0.9}Gd{sub 0.1}AlO{sub 3} samples have been found at 387 and 922 K and at 501 and 894 K. First-order reversible structural phase transformations Pbnm↔R3{sup ¯}c have been detected in both systems at the elevated temperatures. The temperatures of these transitions increase linearly with the decreasing of the samarium content. Phase diagrams of the pseudo-binary systems SmAlO{sub 3}–EuAlO{sub 3} and SmAlO{sub 3}–GdAlO{sub 3} have been constructed.

  9. Comparative analysis of 11 different radioisotopes for palliative treatment of bone metastases by computational methods

    Energy Technology Data Exchange (ETDEWEB)

    Guerra Liberal, Francisco D. C., E-mail: meb12020@fe.up.pt, E-mail: adriana-tavares@msn.com; Tavares, Adriana Alexandre S., E-mail: meb12020@fe.up.pt, E-mail: adriana-tavares@msn.com; Tavares, João Manuel R. S., E-mail: tavares@fe.up.pt [Instituto de Engenharia Mecânica e Gestão Industrial, Faculdade de Engenharia, Universidade do Porto, Rua Dr. Roberto Frias s/n, Porto 4200-465 (Portugal)

    2014-11-01

    Purpose: Throughout the years, the palliative treatment of bone metastases using bone seeking radiotracers has been part of the therapeutic resources used in oncology, but the choice of which bone seeking agent to use is not consensual across sites and limited data are available comparing the characteristics of each radioisotope. Computational simulation is a simple and practical method to study and to compare a variety of radioisotopes for different medical applications, including the palliative treatment of bone metastases. This study aims to evaluate and compare 11 different radioisotopes currently in use or under research for the palliative treatment of bone metastases using computational methods. Methods: Computational models were used to estimate the percentage of deoxyribonucleic acid (DNA) damage (fast Monte Carlo damage algorithm), the probability of correct DNA repair (Monte Carlo excision repair algorithm), and the radiation-induced cellular effects (virtual cell radiobiology algorithm) post-irradiation with selected particles emitted by phosphorus-32 ({sup 32}P), strontium-89 ({sup 89}Sr), yttrium-90 ({sup 90}Y ), tin-117 ({sup 117m}Sn), samarium-153 ({sup 153}Sm), holmium-166 ({sup 166}Ho), thulium-170 ({sup 170}Tm), lutetium-177 ({sup 177}Lu), rhenium-186 ({sup 186}Re), rhenium-188 ({sup 188}Re), and radium-223 ({sup 223}Ra). Results: {sup 223}Ra alpha particles, {sup 177}Lu beta minus particles, and {sup 170}Tm beta minus particles induced the highest cell death of all investigated particles and radioisotopes. The cell survival fraction measured post-irradiation with beta minus particles emitted by {sup 89}Sr and {sup 153}Sm, two of the most frequently used radionuclides in the palliative treatment of bone metastases in clinical routine practice, was higher than {sup 177}Lu beta minus particles and {sup 223}Ra alpha particles. Conclusions: {sup 223}Ra and {sup 177}Lu hold the highest potential for palliative treatment of bone metastases of all

  10. Vulnerability of soils towards mining operations in gold-bearing sands in Chile

    Science.gov (United States)

    Jordán, Manuel Miguel; González, Irma; Bech, Jaume; Sanfeliu, Teófilo; Pardo, Francisco

    2015-04-01

    , lead, cadmium, crome, zinc, cobalt, cooper, platinum, gold, indium, tellurium, etc., and as well some traces of cerium, praseodymium, gadolinium, neodymium, samarium and lanthanum. The recurring presence of Pb, sulphur and Hg, among others, in mineral species like galena and cinnabar reveal accumulation indices, a product of the contaminating action of human beings. This is notable since no records exist of natural deposits of these minerals that can justify their presence, and records were utilized from semi-industrial exploitations for the extaction of gold where Hg is utilized in the amalgamation processes.

  11. Laboratory calibration and field testing of the Chemcatcher-Metal for trace levels of rare earth elements in estuarine waters.

    Science.gov (United States)

    Petersen, Jördis; Pröfrock, Daniel; Paschke, Albrecht; Broekaert, Jose A C; Prange, Andreas

    2015-10-01

    Little knowledge is available about water concentrations of rare earth elements (REEs) in the marine environment. The direct measurement of REEs in coastal waters is a challenging task due to their ultra-low concentrations as well as the high salt content in the water samples. To quantify these elements at environmental concentrations (pg L(-1) to low ng L(-1)) in coastal waters, current analytical techniques are generally expensive and time consuming, and require complex chemical preconcentration procedures. Therefore, an integrative passive sampler was tested as a more economic alternative sampling approach for REE analysis. We used a Chemcatcher-Metal passive sampler consisting of a 3M Empore Chelating Disk as the receiving phase, as well as a cellulose acetate membrane as the diffusion-limiting layer. The effect of water turbulence and temperature on the uptake rates of REEs was analyzed during 14-day calibration experiments by a flow-through exposure tank system. The sampling rates were in the range of 0.42 mL h(-1) (13 °C; 0.25 m s(-1)) to 4.01 mL h(-1) (13 °C; 1 m s(-1)). Similar results were obtained for the different REEs under investigation. The water turbulence was the most important influence on uptake. The uptake rates were appropriate to ascertain time-weighted average concentrations of REEs during a field experiment in the Elbe Estuary near Cuxhaven Harbor (exposure time 4 weeks). REE concentrations were determined to be in the range 0.2 to 13.8 ng L(-1), where the highest concentrations were found for neodymium and samarium. In comparison, most of the spot samples measured along the Chemcatcher samples had REE concentrations below the limit of detection, in particular due to necessary dilution to minimize the analytical problems that arise with the high salt content in marine water samples. This study was among the first efforts to measure REE levels in the field using a passive sampling approach. Our results suggest that passive samplers could be

  12. Mineralogy and instrumental neutron activation analysis of seven National Bureau of Standards and three Instituto de Pesquisas Tecnologicas clay reference samples

    Science.gov (United States)

    Hosterman, John W.; Flanagan, F.J.; Bragg, Anne; Doughten, M.W.; Filby, R.H.; Grimm, Catherine; Mee, J.S.; Potts, P.J.; Rogers, N.W.

    1987-01-01

    parts per million, is very much higher than that of the other clays. Plots of average REE contents of the flint and plastic clays, normalized to chondritic abundances, show that the clays from Missouri differ from the same types of clay from Pennsylvania. The plot of REE contents for the miscellaneous clays shows that the normalized means for the elements lanthanum through samarium for IPT-28 are much greater than those for the other miscellaneous clays. The means for the elements europium through lutetium are similar for all three miscellaneous clays.

  13. Modeling of Semiconductors and Correlated Oxides with Point Defects by First Principles Methods

    KAUST Repository

    Wang, Hao

    2014-06-15

    Point defects in silicon, vanadium dioxide, and doped ceria are investigated by density functional theory. Defects involving vacancies and interstitial oxygen and carbon in silicon are after formed in outer space and significantly affect device performances. The screened hybrid functional by Heyd-Scuseria-Ernzerhof is used to calculate formation energies, binding energies, and electronic structures of the defective systems because standard density functional theory underestimates the bang gap of silicon. The results indicate for the A-center a −2 charge state. Tin is proposed to be an effective dopant to suppress the formation of A-centers. For the total energy difference between the A- and B-type carbon related G-centers we find close agreement with the experiment. The results indicate that the C-type G-center is more stable than both the A- and B-types. The electronic structures of the monoclinic and rutile phases of vanadium dioxide are also studied using the Heyd-Scuseria-Ernzerhof functional. The ground states of the pure phases obtained by calculations including spin polarization disagree with the experimental observations that the monoclinic phase should not be magnetic, the rutile phase should be metallic, and the monoclinic phase should have a lower total energy than the rutile phase. By tuning the Hartree-Fock fraction α to 10% the agreement with experiments is improved in terms of band gaps and relative energies of the phases. A calculation scheme is proposed to simulate the relationship between the transition temperature of the metal-insulator transition and the dopant concentration in tungsten doped vanadium dioxide. We achieve good agreement with the experimental situation. 18.75% and 25% yttrium, lanthanum, praseodymium, samarium, and gadolinium doped ceria supercells generated by the special quasirandom structure approach are employed to investigate the impact of doping on the O diffusion. The experimental behavior of the conductivity for the

  14. Synthesis, Characterization, and Enhanced Magnetic Properties of Iron Carbide Nanomaterials

    Science.gov (United States)

    Williams, Brent M.

    Permanent magnets are classified as hard magnetic materials with the main purpose of generating flux for applications such as electric motors, turbines, and hard drives. High coercivity, magnetic remanence, and saturation values with high stability are some of the requirements for permanent magnets. Rare-earth magnets including neodymium and samarium based magnets are known to have superior magnetic properties due to their high magnetocrystalline anisotropy. However, due to the price of rare-earth materials development of alternate permanent magnets composed of inexpensive materials is an ongoing process. Previously cobalt carbide (CoxC) have shown promise as a potential rare-earth free magnet alternative with magnetic properties comparable to that of hexaferrite materials. Unfortunately, CoxC magnets have a low magnetic saturation (50 emu g-1) which drastically lowers its energy product. Alternatively, iron carbide has a rather high bulk magnetization value of 140 emu g-1 and is composed of naturally abundant materials. The sole issue of iron carbide is that it is considered an intermediate magnet with properties between those of a hard and a soft magnetic material. The main focus of this work is the enhancement of the hard magnetic properties of iron carbide through size effect, shape anisotropy, magnetocrystalline anisotropy and exchange anisotropy. First a wet synthesis method was developed which utilized hexadecyltrimethylammonium chloride to control particle size, shape, and crystal structure to manipulate the magnetic properties of iron carbide. With this method a semi-hard 50 nm orthorhombic Fe3C phase and a magnetically soft single crystal hexagonal Fe7C3 structure with texture-induced magnetic properties were developed. The properties for both materials were further enhanced through formation of exchange bias Fe3C/CoO nanoaggregates and spring exchange coupling of the ferromagnetically hard and soft phases of Fe7C3/SrFe 12O19. A 33% increase in coercivity

  15. Laser Materials and Laser Spectroscopy - A Satellite Meeting of IQEC '88

    Science.gov (United States)

    Wang, Zhijiang; Zhang, Zhiming

    1989-03-01

    Highly Excited Vibrational State * Investigation of the Stark Effect in Xenon Autoionizing Rydberg Series with the Use of Coherent Tunable XUV Radiation * Laser Spectroscopy of Autoionising 5 dnf J = 4.5 Rydberg Series of Ba I * Resonance Photoionization Spectroscopy of Atoms: Autoionization and Highly Excited States of Kr and U * Stark Spectra of Strontium and Calcium Atoms * Observation of Bidirectional Stimulated Radiation at 330 nm, 364 nm and 718 nm with 660 nm Laser Pumping in Sodium Vapour * Study of Molecular Rydberg States and their Discriminations in Na2 * The Measurement of the High Excited Spectra of Samarium by using Stepwise Laser Excitation Method * Product Analysis in the Reaction of the Two-photon Excited Xe(5p56p) States with Freons * Photoionization Spectra of Ca and Sr Atoms above the Classical Field-ionization Threshold * Effect of Medium Background on the Hydrogen Spectrum * Photoemission and Photoelectron Spectra from Autoionizing Atoms in Strong Laser Field * Natural Radiative Lifetime Measurements of High-lying States of Samarium * Two-step Laser Excitation of nf Rydberg States in Neutral Al and Observation of Stark Effect * Measurements of Excited Spectra of the Refractory Metal Elements using Discharge Synchronized with the Laser Pulse * Multiphoton Ionization of Atomic Lead at 1.06μ * Kinetic Processes in the Electron-beam pumped KrF Laser * Laser-induced Fluorescence of Zn2 Excimer * Calculation of Transition Intensity in Heteronuclear Dimer NaK: Comparison with Experiment * Laser-induced Fluorescence of CCl2 Carbene * Study of Multiphoton Ionization Spectrum of Benzene and Two-photon Absorption Cross Section * Dicke Narrowing of N2O Linewidth Perturbed by N2 at 10 μm Band * Polyatomic Molecular Ions Studied by Laser Photodissociation Spectroscopy * Transverse-optically Pumped Ultraviolet S2 Laser * Multiphoton Ionization of Propanal by High Power Laser * UV MPI Mass Spectroscopy and Dynamics of Photodissociation of SO2 * Multiphoton

  16. Effect of ZnSe and CdSe nanoparticles on the fluorescence and optical band gap of Sm3+ doped lead borate glasses

    Science.gov (United States)

    Fatokun, Stephen O.

    For the first part of this work, we prepared a series of Sm-doped lead borate (PbO-B2O3) glasses containing zinc selenide (ZnSe) and cadmium selenide (CdSe) nanoparticles (NPs) and studied the Sm 3+ fluorescence by varying the glass composition and size of the NPs. We have chosen these heavy metal oxide glasses to incorporate Sm3+ ions because they have large glass forming region, high refractive index, and good physical and thermal stability. Lead borate glasses with the following compositions xPbO:(96.5-x)B2O 3:0.5Sm2O3:3ZnSe/CdSe, x=36.5 and 56.5 mol%) are prepared using the melt-quenching method. Transmission electron microscopy characterization was done to confirm both nucleation and growth of the NPs for different annealing times. Fluorescence spectra of these samples are obtained with the excitation wavelengths at 403 and 477nm. Three fluorescence transitions are observed at 563 nm, 598 nm and 646 nm. The transition at 646 nm is a electric dipole (ED) transition that strongly depends on the covalency of the Sm-O bond and the asymmetry of the crystal field at the Sm3+ site. The 646 nm/598 nm fluorescence intensity ratio has been studied for different annealing times and PbO concentration for both ZnSe and CdSe samples. Longer annealing times tend to make the crystal field at the Sm3+ site more symmetric in nature for these glasses. The presence of CdSe NPs is seen to produce the greatest influence on the fluorescence intensity ratio. This is believed to be due to the larger size of the CdSe nanoparticles and its stronger influence on Sm3+ ions. The second part of this work was dedicated to the understanding of the optical band gap of samarium doped lead borate glasses with and without ZnSe/CdSe NPs. Optical absorption spectra for all these glass samples show their absorption edge in the ultraviolet region. Detailed analysis of the absorption edge was carried out using the Mott-Davis model and the optical band gap and the width of the tail in the band gap

  17. Enhancement of anion binding in lanthanide optical sensors.

    Science.gov (United States)

    Cable, Morgan L; Kirby, James P; Gray, Harry B; Ponce, Adrian

    2013-11-19

    In the design of molecular sensors, researchers exploit binding interactions that are usually defined in terms of topology and charge complementarity. The formation of complementary arrays of highly cooperative, noncovalent bonding networks facilitates protein-ligand binding, leading to motifs such as the "lock-and-key". Synthetic molecular sensors often employ metal complexes as key design elements as a way to construct a binding site with the desired shape and charge to achieve target selectivity. In transition metal complexes, coordination number, structure and ligand dynamics are governed primarily by a combination of inner-sphere covalent and outer-sphere noncovalent interactions. These interactions provide a rich variable space that researchers can use to tune structure, stability, and dynamics. In contrast, lanthanide(III)-ligand complex formation and ligand-exchange dynamics are dominated by reversible electrostatic and steric interactions, because the unfilled f shell is shielded by the larger, filled d shell. Luminescent lanthanides such as terbium, europium, dysprosium, and samarium display many photophysical properties that make them excellent candidates for molecular sensor applications. Complexes of lanthanide ions act as receptors that exhibit a detectable change in metal-based luminescence upon binding of an anion. In our work on sensors for detection of dipicolinate, the unique biomarker of bacterial spores, we discovered that the incorporation of an ancillary ligand (AL) can enhance binding constants of target anions to lanthanide ions by as much as two orders of magnitude. In this Account, we show that selected ALs in lanthanide/anion systems greatly improve sensor performance for medical, planetary science, and biodefense applications. We suggest that the observed anion binding enhancement could result from an AL-induced increase in positive charge at the lanthanide ion binding site. This effect depends on lanthanide polarizability, which can be

  18. Surfactant-mediated PMMA-templating fabrication and characterization of three-dimensionally ordered macroporous Eu{sub 2}O{sub 3} and Sm{sub 2}O{sub 3} with mesoporous walls

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Han [Laboratory of Catalysis Chemistry and Nanoscience, Department of Chemistry and Chemical Engineering, College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124 (China); Dai Hongxing, E-mail: hxdai@bjut.edu.cn [Laboratory of Catalysis Chemistry and Nanoscience, Department of Chemistry and Chemical Engineering, College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124 (China); Liu Yuxi; Deng Jiguang; Zhang Lei; Ji Kemeng [Laboratory of Catalysis Chemistry and Nanoscience, Department of Chemistry and Chemical Engineering, College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124 (China)

    2011-09-15

    Graphical abstract: Three-dimensionally ordered macroporous (3DOM) Eu{sub 2}O{sub 3} and Sm{sub 2}O{sub 3} with mesopore walls can be fabricated by the surfactant-assisted PMMA-templating method. 3DOM Eu{sub 2}O{sub 3} obtained with sucrose possesses a surface area up to 37 m{sup 2} g{sup -1}. 3DOM Eu{sub 2}O{sub 3} and Sm{sub 2}O{sub 3} show strong UV-light absorption. By tailoring the pore structure of Eu{sub 2}O{sub 3} and Sm{sub 2}O{sub 3}, the luminescent property can be modified. Highlights: {yields} 3DOM Eu{sub 2}O{sub 3} and Sm{sub 2}O{sub 3} with mesopore walls are fabricated by the PMMA-templating method. {yields} Surfactant addition and carbonization process favor the formation of the 3DOM structure. {yields} 3DOM Eu{sub 2}O{sub 3} obtained with sucrose possesses a surface area up to about 37 m{sup 2} g{sup -1}. {yields} 3DOM Eu{sub 2}O{sub 3} and Sm{sub 2}O{sub 3} show excellent UV-light absorption. {yields} The luminescent property can be modified by tailoring the pore structure of Eu{sub 2}O{sub 3} and Sm{sub 2}O{sub 3}. - Abstract: Three-dimensionally ordered macroporous (3DOM) europium oxide and samarium oxide with mesoporous walls and cubic crystal structures have been successfully fabricated with polymethyl methacrylate (PMMA) as hard template and F127, sucrose, and L-lysine as surfactant. The as-fabricated rare earth oxides were characterized by means of X-ray diffraction, thermogravimetric analysis, differential scanning calorimetric analysis, Fourier-transform infrared spectroscopy, scanning electron microscope, transmission electron microscopy, selected-area electron diffraction, nitrogen adsorption-desorption, ultraviolet-visible diffuse reflectance spectroscopy, and photoluminescence spectroscopy. It is shown that the as-fabricated Eu{sub 2}O{sub 3} and Sm{sub 2}O{sub 3} samples displayed 3DOM architectures with polycrystalline wormhole-like mesoporous walls. The nature of surfactant and solvent and calcination parameter had important

  19. Uma alternativa mecânica com emprego de forças magnéticas para a desimpactação dentária A mechanical alternative with employment of magnetic force for the tooth desimpactation

    Directory of Open Access Journals (Sweden)

    Sisenando Itabaiana Sobrinho

    2006-02-01

    Full Text Available OBJETIVO: o presente trabalho teve como finalidade avaliar clinicamente uma nova alternativa mecânica para a erupção guiada ao plano oclusal de um dente pré-molar impactado empregando magnetos atrativos da liga samário-cobalto. METODOLOGIA: o tratamento cirúrgico-ortodôntico foi realizado em uma paciente jovem de 11 anos portadora de oclusão de Classe I de Angle, com impactação do segundo pré-molar inferior direito. O sistema magnético empregado consistiu de um magneto colado com resina fotopolimerizável sobre a superfície vestibular do dente impactado e um outro pólo magnético rígido incrustado em um aparelho banda alça. Previamente à instalação do sistema magnético no meio bucal, os magnetos foram caracterizados através de análise de fluorescência, difração de raios X e nível de magnetização. A relação força/distância empregada foi quantificada, os magnetos foram medidos e a geometria magnética bucal estabelecida. RESULTADOS: o tempo empregado na desimpactação foi de 40 dias e foram necessárias duas ativações magnéticas por aproximação dos magnetos neste intervalo. A opção magnética neste caso clínico foi bastante eficaz tanto em relação ao tempo de tratamento quanto em relação ao conforto proporcionado ao paciente. Os magnetos empregados geraram um campo de força contínuo e autônomo não sendo necessária a utilização de fios metálicos como guias de orientação na erupção e nem elásticos de tracionamento. CONCLUSÃO: esta possibilidade terapêutica poderá ser útil em desimpactações mais profundas tais como os caninos ectópicos, cuja ocorrência é freqüente.AIM: the present work evaluated a new mechanical alternative to guide the eruption to the oclusal plan of a impacted bicuspid tooth using attractive cobalt-samarium magnets. METHODS: the treatment was accomplished in a 11 years old Class I young patient, with a impacted right inferior second premolar. The magnetic system

  20. Amorphous and nanocrystalline phase formation in highly-driven Al-based binary alloys

    Energy Technology Data Exchange (ETDEWEB)

    Kalay, Yunus Eren [Iowa State Univ., Ames, IA (United States)

    2009-01-01

    Remarkable advances have been made since rapid solidification was first introduced to the field of materials science and technology. New types of materials such as amorphous alloys and nanostructure materials have been developed as a result of rapid solidification techniques. While these advances are, in many respects, ground breaking, much remains to be discerned concerning the fundamental relationships that exist between a liquid and a rapidly solidified solid. The scope of the current dissertation involves an extensive set of experimental, analytical, and computational studies designed to increase the overall understanding of morphological selection, phase competition, and structural hierarchy that occurs under far-from equilibrium conditions. High pressure gas atomization and Cu-block melt-spinning are the two different rapid solidification techniques applied in this study. The research is mainly focused on Al-Si and Al-Sm alloy systems. Silicon and samarium produce different, yet favorable, systems for exploration when alloyed with aluminum under far-from equilibrium conditions. One of the main differences comes from the positions of their respective T0 curves, which makes Al-Si a good candidate for solubility extension while the plunging T0 line in Al-Sm promotes glass formation. The rapidly solidified gas-atomized Al-Si powders within a composition range of 15 to 50 wt% Si are examined using scanning and transmission electron microscopy. The non-equilibrium partitioning and morphological selection observed by examining powders at different size classes are described via a microstructure map. The interface velocities and the amount of undercooling present in the powders are estimated from measured eutectic spacings based on Jackson-Hunt (JH) and Trivedi-Magnin-Kurz (TMK) models, which permit a direct comparison of theoretical predictions. For an average particle size of 10 {micro}m with a Peclet number of ~0.2, JH and TMK deviate from

  1. The age of the martian meteorite Northwest Africa 1195 and the differentiation history of the shergottites

    Energy Technology Data Exchange (ETDEWEB)

    Symes, S; Borg, L; Shearer, C; Irving, A

    2007-04-05

    Samarium-neodymium isotopic analyses of unleached and acid-leached mineral fractions from the recently identified olivine-bearing shergottite Northwest Africa 1195 yield a crystallization age of 348 {+-} 19 Ma and an {var_epsilon}{sub Nd}{sup 143} value of +40.1 {+-} 1.3. Maskelynite fractions do not lie on the Sm-Nd isochron and appear to contain a martian surface component with low {sup 147}Sm/{sup 144}Nd and {sup 143}Nd/{sup 144}Nd ratios that was added during shock. The Rb-Sr system is disturbed and does not yield an isochron. Terrestrial Sr appears to have affected all of the mineral fractions, although a maximum initial {sup 87}Sr/{sup 86}Sr ratio of 0.701614 {+-} 16 is estimated by passing a 348 Ma reference isochron through the maskelynite fraction that is least affected by contamination. The high initial {var_epsilon}{sub Nd}{sup 143} value and the low initial {sup 87}Sr/{sup 86}Sr ratio, combined with the geologically young crystallization age, indicate that Northwest Africa 1195 is derived from a source region characterized by a long-term incompatible element depletion. The age and initial Sr and Nd isotopic compositions of Northwest Africa 1195 are very similar to those of Queen Alexandra Range 94201, indicating these samples were derived from source regions with nearly identical Sr-Nd isotopic systematics. These similarities suggest that these two meteorites share a close petrogenetic relationship and might have been erupted from a common volcano. The meteorites Yamato 980459, Dar al Gani 476, Sayh al Uhaymir 005/008, and Dhofar 019 also have relatively old ages between 474-575 Ma and trace element and/or isotopic systematics that are indicative of derivation from incompatible-element-depleted sources. This suggests that the oldest group of meteorites is more closely related to one another than they are to the younger meteorites that are derived from less incompatible-element-depleted sources. Closed-system fractional crystallization of this suite of

  2. Characterization and component tracing of Banded Iron Formations deposited during the ~2.7 Ga superplume event: An example from the Tati Greenstone Belt, Northeastern Botswana

    Science.gov (United States)

    Døssing, L. N.; Frei, R.; Stendal, H.; Mapeo, R. B.

    2008-12-01

    Major and trace element, samarium (Sm)-neodymium (Nd) and lead (Pb) isotopic analyses of individual mesobands of five Banded Iron Formations (BIFs) and associated metavolcanic and metasedimentary rocks from the Neoarchean Tati Greenstone Belt (TGB, Northeastern Botswana) were conducted in order to characterize and determine the source(s) and depositional environment(s) of these chemical sediments and to compare their features with other Archean BIFs. Rare earth element (REE)-yttrium (Y) patterns of individual BIF mesobands from the TGB show features characteristic of other Archean BIFs; these are (relative to Post Archean Australian Shale (PAAS) normalization), LREE depletions relative to MREE and HREE, positive lanthanum La/La*PAAS, europium Eu/Eu*PAAS, and Y/holmium (Ho) ratios. The TGB BIFs also lack defined cerium Ce/Ce*PAAS anomalies. Generally, the REY patterns are similar to modern seawater and together with low concentrations of high-field strength elements these features are indicative of an essentially detritus-free precipitation. Uranogenic Pb isotope data for the BIFs define individual correlation lines with slopes corresponding to apparent ages of ~2.7 Ga, interpreted as closely reflecting the depositional time frames. An exception to this are the BIFs at Mupane mine in the central part of the TGB which exhibit disturbed U-Pb isotope systematics. They indicate a pronounced resetting around 2.0 Ga. This is also reflected by Pb isotope data of gold-bearing sulfides and Pb-stepwise leaching (PbSL) data of garnets from associated metasedimentary rocks at this location. The garnet PbSL data define a correlation line in uranogenic Pb isotope space with a slope corresponding to an apparent age of 1976±88 Ma. This age is interpreted as a metamorphic age that can be correlated with ~2.0 Ga tectono- metamorphic events within the adjacent Limpopo orogenic belt, and which apparently have, also affected parts of the adjacent Zimbabwe craton to the north. Elevated

  3. Subcontract Report: Final Report on Assessment of Motor Technologies for Traction Drives of Hybrid and Electric Vehicles (Subcontract #4000080341)

    Energy Technology Data Exchange (ETDEWEB)

    Fezzler, Raymond [BIZTEK Consulting, Inc.

    2011-03-01

    meet the targets. The interviews were supplemented with information from past Oak Ridge National Laboratory (ORNL) reports, previous assessments that were conducted in 2004, and literature on magnet technology. The results of the assessment validated the DOE strategy involving three parallel paths: (1) there is enough of a possibility that RE magnets will continue to be available, either from sources outside China or from increased production in China, that development of IPM motors using RE magnets should be continued with emphasis on meeting the cost target. (2) yet the possibility that RE magnets may become unavailable or too expensive justifies efforts to develop innovative designs for permanent magnet (PM) motors that do not use RE magnets. Possible other magnets that may be substituted for RE magnets include samarium-cobalt (Sm-Co), Alnico, and ferrites. Alternatively, efforts to develop motors that do not use PMs but offer attributes similar to IPM motors also are encouraged. (3) New magnet materials using new alloys or processing techniques that would be less expensive or have comparable or superior properties to existing materials should be developed if possible. IPM motors are by far the most popular choice for hybrid and EVs because of their high power density, specific power, and constant power-speed ratio (CPSR). Performance of these motors is optimized when the strongest possible magnets - i.e., RE neodymium-iron-boron (NdFeB) magnets - are used.

  4. Workshop on Oxygen in the Terrestrial Planets

    Science.gov (United States)

    2004-01-01

    Lunar Metal Grains: Solar, Lunar or Terrestrial Origin? 22) Isotopic Zoning in the Inner Solar System; 23) Redox Conditions on Small Bodies; 24) Determining the Oxygen Fugacity of Lunar Pyroclastic Glasses Using Vanadium Valence - An Update; 25) Mantle Redox Evolution and the Rise of Atmospheric O2; 26) Variation of Kd for Fe-Mg Exchange Between Olivine and Melt for Compositions Ranging from Alkaline Basalt to Rhyolite; 27) Determining the Partial Pressure of Oxygen (PO,) in Solutions on Mars; 28) The Influence of Oxygen Environment on Kinetic Properties of Silicate Rocks and Minerals; 29) Redox Evolution of Magmatic Systems; 30) The Constancy of Upper Mantlefo, Through Time Inferred from V/Sc Ratios in Basalts: Implications for the Rise in Atmospheric 0 2; 31) Nitrogen Solubility in Basaltic Melt. Effects of Oxygen Fugacity, Melt Composition and Gas Speciation; 32) Oxygen Isotope Anomalies in the Atmospheres of Earth and Mars; 33) The Effect of Oxygen Fugacity on Interdiffusion of Iron and Magnesium in Magnesiowiistite 34) The Calibration of the Pyroxene Eu-Oxybarometer for the Martian Meteorites; 35) The Europium Oxybarometer: Power and Pitfalls; 36) Oxygen Fugacity of the Martian Mantle from PigeoniteMelt Partitioning of Samarium, Europium and Gadolinium; 37) Oxidation-Reduction Processes on the Moon: Experimental Verification of Graphite Oxidation in the Apollo 17 Orange Glasses; 38) Oxygen and Core Formation in the Earth; 39) Geologic Record of the Atmospheric Sulfur Chemistry Before the Oxygenation of the Early Earth s Atmosphere; 40) Comparative Planetary Mineralogy: V/(CrCAl) Systematics in Chromite as an Indicator of Relative Oxygen Fugacity; 41) How Well do Sulfur Isotopes Constrain Oxygen Abundance in the Ancient Atmospheres? 42) Experimental Constraints on the Oxygen Isotope (O-18/ O-16) Fractionation in the Ice vapor and Adsorbant vapor Systems of CO2 at Conditions Relevant to the Surface of Mars; 43) Micro-XANES Measurements on Experimental Spinels andhe

  5. Critical materials in the 21 century

    Directory of Open Access Journals (Sweden)

    Srećko Radenko Stopić

    2013-02-01

    uses for rare earth elements include applications in auto catalysts, petroleum refining, metal alloys, cell phones, portable DVDs, etc. Permanent magnets containing neodymium, gadolinium and dysprosium are used in numerous electrical components and generators for wind turbines. The primary defense application (underwater mine detection, satellite power and communication systems, radar systems,etc. use new materials: Neodymium Iron Boron, Samarium Cobalt. REEs extraction from monazite is performed by dissolution in a hot concentrated base or acid solutions. After cooling, the hydroxides of REEs and thorium are recovered by filtration, and thorium is separated by dissolution and selective precipitation. Metallurgy of indium Indium belongs to the group of rare earth elements with a low melting point. Some addition of indium increases the strength, hardness and corrosion resistance of alloys. The most known producers are situated in Belgium, Canada, Russia, France and Japan. Indium is used as coating on metals applied in difficult operation conditions, and in semiconductor techniques for the production of diodes.It is formed as a semi-product after pyrometallurgical and hydrometallurgical treatment of sulphidic raw materials. Indium can be used with other valuable metals such as vanadium, thallium, gallium, germanium, and cadmium. The coating process based on Indium is performed by an electrolytic treatment on the surface.  Metallurgy of yttrium Yttrium compounds found interesting application in many fields. In particular, yttrium is used in the manufacture of superconductors, in super alloys of nickel and cobalt, and solid oxide fuel cells. Yttrium oxide has a high melting point and is used in ceramics. The compounds of yttrium are also used as catalysts. The growing industrial application of the rare earth elements led to a growing interest in finding new technologies for their recoveries. The selective dissolution of yttrium from lanthanum is performed by ammonium