T. Rapatsikou on  Bart and Ragg’s Wallace Stevens

Directory of Open Access Journals (Sweden)

2009-07-01

Full Text Available Eeckhout, Bart and Edward Ragg, eds. Wallace Stevens Across the Atlantic (Basingstoke and New York: Palgrave Macmillan, 2008. Pp. xvii + 246. ISBN 978-0-230-53584-8.Bart Eeckhout and Edward Ragg’s edited collection of essays entitled Wallace Stevens Across the Atlantic is a diverse, well-informed and excellently conceptualized volume offering fresh insights into Wallace Stevens’ poetry. This book can serve as a good introduction to Wallace Stevens’ oeuvre for the general reader, university s...

Russell-Silver syndrome

Science.gov (United States)

Silver-Russell syndrome; Silver syndrome; RSS; Russell-Silver syndrome ... One in 10 children with this syndrome has a problem involving chromosome 7. In other people with the syndrome, it may affect chromosome 11. Most of the time, it ...

Genetics Home Reference: Russell-Silver syndrome

Science.gov (United States)

... Other Names for This Condition RSS Silver-Russell dwarfism Silver-Russell syndrome SRS Related Information How are ... M, Begemann M, Elbracht M. Epigenetic and genetic diagnosis of Silver-Russell syndrome. Expert Rev Mol Diagn. ...

Wallace ja Gromit tegid Hollywoodis puhta töö / Andris Feldmanis

Index Scriptorium Estoniae

Feldmanis, Andris, 1982-

2006-01-01

Hollywoodi animafilmide Annie-auhindade jagamisel võitis 9 auhinda täispikk animafilm "Wallace ja Gromit : Libaküüliku needus" ("Wallace & Gromit : The Curse of the Were-Rabbit") : režissöörid Nick Park ja Steve Box : Suurbritannia 2005

Fännid püstitasid Wallace'ile ja Gromitile kuju / Tiiu Laks

Index Scriptorium Estoniae

Laks, Tiiu, 1984-

2006-01-01

Kuna täispikk animafilm "Wallace ja Gromit : Libaküüliku needus" ("Wallace & Gromit : The Curse of the Were-Rabbit") võitis Oscari, otsustasid fännid filmi autori kodulinna Bristolisse kuju püstitada

Russell and Humean Inferences

Directory of Open Access Journals (Sweden)

João Paulo Monteiro

2001-12-01

Full Text Available Russell's The Problems of Philosophy tries to establish a new theory of induction, at the same time that Hume is there accused of an irrational/ scepticism about induction". But a careful analysis of the theory of knowledge explicitly acknowledged by Hume reveals that, contrary to the standard interpretation in the XXth century, possibly influenced by Russell, Hume deals exclusively with causal inference (which he never classifies as "causal induction", although now we are entitled to do so, never with inductive inference in general, mainly generalizations about sensible qualities of objects ( whether, e.g., "all crows are black" or not is not among Hume's concerns. Russell's theories are thus only false alternatives to Hume's, in (1912 or in his (1948.

Silver-Russell syndrome

Directory of Open Access Journals (Sweden)

Shohela Akhter

2016-08-01

Full Text Available Silver-Russell syndrome is clinically and genetically a heterogeneous disorder. In most of the cases, etiology is unknown, only in 10% cases defect in chromosome 7 is identified. It bas distinctive facial features and asymmetric limbs. Most predominant symptom is growth failure. A case of Silver-Russell syndrome reported here who presented with growth failure, hemihypertrophy ofleft side oftbe body, dysmorphic facial profile and difficulty in speech. Counseling was done with the parents regarding the etiology, progression and outcome of the disease.

Clinical spectrum of silver - Russell syndrome

Directory of Open Access Journals (Sweden)

Sapna N.K. Varma

2013-01-01

Full Text Available Silver - Russell syndrome is a clinically and genetically heterogenous condition characterized by severe intrauterine and postnatal growth retardation, craniofacial disproportion and normal intelligence downward curvature of the corner of the mouth, syndactyly and webbed fingers. Diagnosis of Silver - Russell syndrome remains clinical; no definite etiology or specific tests have been established. In the recent years, it has been shown that more than 38% of patients have hypomethylation in the imprinting control region 1 of 11p15 and one-tenth of patients carry a maternal uniparental disomy of chromosome seven. The pathophysiological mechanisms resulting in the Silver - Russell phenotype remain unknown despite the recent progress in deciphering the molecular defects associated with this condition. This case report describes the clinical features of Silver - Russell syndrome in a father and daughter.

Nick Park pani Wallace'ile ja Gromitile libaküüliku needuse / Mart Rummo

Index Scriptorium Estoniae

Rummo, Mart

2005-01-01

Uus animafilm "Wallace ja Gromit : Libaküüliku needus" ("Wallace & Gromit : The Curse of the Were-Rabbit") : režissöör Nick Park : Suurbritannia 2005. Selle loojast ja tema loometeest. Lisatud : Nick Park (filmograafia, auhindu), "Teised Nick Parkist" (Lauri Kaare, Mait Laas, Riho Unt)

Wallace ja Gromit tulid Londonis linale / Andres Laasik

Index Scriptorium Estoniae

Laasik, Andres, 1960-2016

2005-01-01

Londonis esilinastus animafilm "Wallace ja Gromit : Libaküüliku needus" : režissöör Nick Park : Suurbritannia 2005. Kohal olid ka tegelastele hääle andnud Ralph Fiennes, Helena Bonham Carter ja Peter Sallis

[Silver-Russell syndrome with panhypopituitarism (author's transl)].

Science.gov (United States)

Stögmann, W; Borkenstein, M; Grubbauer, H M

1978-11-01

This is a report on a 14 years old boy suffering from the unusual combination of Silver-Russell syndrome with panhypopituitarism. The Silver-Russell syndrome is a special form of primordial dwarfism characterised by congenital asymmetry, craniofacial dysmorphy and other anomalies. Its cause is unknown, intrauterine noxes and genetical factors are discussed. In the most cases results of hormone determinations are normal, but also cases with elevated or very low hormone levels were published. This is the first report about a Silver-Russell syndrome combined with panhypopituitarism.

Russell Body Gastroenteritis: An Aberrant Manifestation of Chronic Inflammation in Gastrointestinal Mucosa

Directory of Open Access Journals (Sweden)

Feriyl Bhaijee

2013-01-01

Full Text Available First described in 1998, Russell body gastritis is a rare chronic inflammatory condition characterized by abundant intramucosal polyclonal plasma cells, which contain intracytoplasmic eosinophilic globules of immunoglobulins (Russell bodies that displace the nucleus, with an accompanying chronic inflammatory infiltrate. Russell bodies represent a cellular response to overstimulation of plasma cells, leading to the accumulation of abundant, nondegradable, condensed immunoglobulin in dilated rough endoplasmic reticulum cisternae. Russell body gastritis usually occurs in the gastric antrum, but two cases of Russell body duodenitis have been recently described. Herein, we report an unusual case of Barrett esophagus with prominent lymphoplasmacytic infiltration and Russell bodies, which expands the current spectrum of Russell body gastritis/duodenitis. Given the various anatomic locations in which Russell body gastritis may arise, we suggest that “Russell body gastroenteritis” may be a more appropriate designation for this uncommon reactive condition.

The Critical Importance of Russell's Diagram

Science.gov (United States)

Gingerich, O.

2013-04-01

The idea of dwarf and giants stars, but not the nomenclature, was first established by Eijnar Hertzsprung in 1905; his first diagrams in support appeared in 1911. In 1913 Henry Norris Russell could demonstrate the effect far more strikingly because he measured the parallaxes of many stars at Cambridge, and could plot absolute magnitude against spectral type for many points. The general concept of dwarf and giant stars was essential in the galactic structure work of Harlow Shapley, Russell's first graduate student. In order to calibrate the period-luminosity relation of Cepheid variables, he was obliged to fall back on statistical parallax using only 11 Cepheids, a very sparse sample. Here the insight provided by the Russell diagram became critical. The presence of yellow K giant stars in globular clusters credentialed his calibration of the period-luminosity relation by showing that the calibrated luminosity of the Cepheids was comparable to the luminosity of the K giants. It is well known that in 1920 Shapley did not believe in the cosmological distances of Heber Curtis' spiral nebulae. It is not so well known that in 1920 Curtis' plot of the period-luminosity relation suggests that he didn't believe it was a physical relation and also he failed to appreciate the significance of the Russell diagram for understanding the large size of the Milky Way.

21 CFR 864.8950 - Russell viper venom reagent.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Russell viper venom reagent. 864.8950 Section 864.8950 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Hematology Reagents § 864.8950 Russell viper venom...

An Interview with Arlie Russell Hochschild

DEFF Research Database (Denmark)

Willig, Rasmus

2017-01-01

This is the second of two interviews with Arlie Russell Hochschild, Professor Emerita of Sociology at the University of California, Berkeley. In her work, Hochschild explores the many ways we manage our emotions in personal life and perform emotional labor in the workplace.......This is the second of two interviews with Arlie Russell Hochschild, Professor Emerita of Sociology at the University of California, Berkeley. In her work, Hochschild explores the many ways we manage our emotions in personal life and perform emotional labor in the workplace....

Dewitt Wallace-Reader's Digest Fund National Library Power Program.

Science.gov (United States)

School Library Media Annual (SLMA), 1993

1993-01-01

Describes the National Library Power Program, a collaborative effort sponsored by the Dewitt Wallace-Reader's Digest Fund in cooperation with local education funds and public school districts that was designed to create public elementary and middle school library programs that are central to the education program of the school. (LRW)

The Russell Case: Academic Freedom vs. Public Hysteria.

Science.gov (United States)

McCarthy, Joseph M.

This paper examines issues of academic freedom and the community's role in a review of public and legal events leading to the court's striking down of the 1940 appointment of Bertrand Russell to teach at the City College of New York. Russell was to teach three philosophy courses relating logic, mathematics, and science to philosophy. Episcopal…

Wallace H. Coulter: decades of invention and discovery.

Science.gov (United States)

Robinson, J Paul

2013-05-01

Only a few inventors can be said to have made as great an impact on mankind as Wallace Coulter. His inquisitive mind and ability to see well beyond what existed served him well for 40 years of inventing. So many of the fundamental tools that exist today in the area of hematology were derived from or driven by Coulter's inventions that he could be called the most technological innovator in the field of modern hematology. In achieving these discoveries Wallace Coulter was clearly capable of visualizing future opportunities that few others recognized. His vision was combined with an uncanny ability to translate his ideas into products. He developed a large number of tools that shaped the fields of cytometry, image analysis, and industrial materials. His understanding of the future power of computation drove him to link these technologies in a unique way. In the end, Coulter shaped the technologies that ultimately drove hematology in a new direction, one that remains on a critical pathway linking technology innovation all the way to true translational impact. It was said of Henry Ford that "[h]e has no notion that wealth has made him great, and any one who is imprest merely by his wealth bores him. In his personal contacts he likes to dodge the subject. He would prefer to talk with a machinist about machinery, or with somebody who likes birds about birds. In these contacts, he asks no deference; and if he gets it, he suspects it is mere deference to wealth, and that ends his interest."(1) The same could be said of Wallace Coulter, who, like Ford, understood the concepts of mass production and customer service. Coulter had the ability to recognize the opportunity and fulfill the need for development of a blood-cell counter that could be placed in every pathology laboratory, and in so doing transformed a field from a qualitative to a quantitative environment. Every person who has ever entered a medical lab, hospital, or doctor's office has felt the impact of Coulter

The George Wallace Shooting: News Diffusion and the Sleeper Effect.

Science.gov (United States)

Steinfatt, Thomas M.; And Others

Previous studies conclude that the assassination attempt on George C. Wallace was a news event of high, but not maximum, importance, implying that the majority of respondents in any sample would report first learning of the attack via mass media sources. The authors interviewed 144 persons in Ann Arbor, Michigan, regarding their awareness of the…

O Platonismo de Russell na metafísica e na matemática

Directory of Open Access Journals (Sweden)

Guido Imaguire

2005-06-01

Full Text Available Neste artigo, analiso o surgimento e a superação do Platonismo em B. Russell, tanto na sua filosofia da matemática como na sua metafísica. Começo por explicitar os argumentos que levaram Russell a aderir ao chamado "Platonismo Proposicional" - posição que será tecnicamente relevante na definição de números. Na seção seguinte, discutirei até que ponto a teoria das descrições definidas determina, necessariamente, uma adesão ao nominalismo, e as dificuldades que surgem para o logicismo conseqüentes do abandono do platonismo. Finalmente, mostrarei como a posição madura de Russell caracteriza-se mais como um reducionismo do que propriamente como um nominalismo, e como este é fundado no princípio do mínimo vocabulário.In this paper, I analyze the emergence and the overcoming of Platonism both in Russell's philosophy of mathematics and his metaphysics. I begin by examining the arguments which led Russell to endorse a position that I term "Propositional Platonism" - this position proves to be relevant for Russell's definition of numbers. In the following section, I address the question of the extent to which Russell's theory of descriptions implies the acceptance of nominalism. Moreover, I examine the difficulties which arise for logicism, if it no longer goes hand in hand with platonism. Finally, I argue argue that Russell's mature position is to be characterized as a form of reductionism rather than as a variant of nominalism

Russell Crowe maailma tipust maailma äärele / Timo Diener

Index Scriptorium Estoniae

Diener, Timo

2003-01-01

Näitleja Russell Crowe ja tema suhe oma rolliga seiklusfilmis "Kapten ja komandör : retk maailma äärele" ("Master and Commander : The Far Side of the World") : stsenarist Patrick O'Briani romaanide järgi ja režissöör Peter Weir : peaosas Russell Crowe : Ameerika Ühendriigid 2003

The Greatest Show on Earth

Indian Academy of Sciences (India)

Darwin and Alfred Russel Wallace: life on earth had evolved ... over long epochs, the pace of change was infinitesimal. ... Thanks to the work of the Japanese theoreti- cian Motoo ... pleasure-minus-expenditure balance is posi- tive. This way of ...

Musical Metaphors in the Poetry of Wallace Stevens

Directory of Open Access Journals (Sweden)

Victor Kennedy

2016-06-01

Full Text Available Wallace Stevens’s “The Man with the Blue Guitar” (1937 is widely recognized as one of the most important and influential poems of the 20th century. Inspired by Picasso’s painting The Old Guitarist, the poem in turn inspired Michael Tippett’s sonata for solo guitar, “The Blue Guitar” (Tippett 1983 and David Hockney’s The Blue Guitar: Etchings by David Hockney who was inspired by Wallace Stevens who was inspired by Pablo Picasso (Hockney and Stevens 1977. Central to “The Man with the Blue Guitar,” the metaphor of the musical instrument as a transformational symbol of the imagination is common in Stevens’s poems. The structure of “The Man with the Blue Guitar,” according to J. Hillis Miller, is the structure of stream-of-consciousness. Stevens’s poem creates what has been called “the deconstructed moment in modern poetry,” “an attempt to project a spatialized time that can be viewed from the privileged position of a timeless, static moment capable of encompassing a life at a glance” (Jackson 1982. This consciousness, which Derrida refers to as the “trace,” Stevens calls “the evasive movement of language.” The trace is the perception of the absence of meaning after the word or perception has passed, the glimpse of a hidden meaning that immediately vanishes. Stevens’s poem influenced not only other poets, artists and composers; references to and echoes of his ideas and techniques can be seen in popular music and culture well into the 21st century.

Multiple transgressions of Wallace's Line explain diversity of flightless Trigonopterus weevils on Bali.

Science.gov (United States)

Tänzler, Rene; Toussaint, Emmanuel F A; Suhardjono, Yayuk R; Balke, Michael; Riedel, Alexander

2014-05-07

The fauna of Bali, situated immediately west of Wallace's Line, is supposedly of recent Javanese origin and characterized by low levels of endemicity. In flightless Trigonopterus weevils, however, we find 100% endemism for the eight species here reported for Bali. Phylogeographic analyses show extensive in situ differentiation, including a local radiation of five species. A comprehensive molecular phylogeny and ancestral area reconstruction of Indo-Malayan-Melanesian species reveals a complex colonization pattern, where the three Balinese lineages all arrived from the East, i.e. all of them transgressed Wallace's Line. Although East Java possesses a rich fauna of Trigonopterus, no exchange can be observed with Bali. We assert that the biogeographic picture of Bali has been dominated by the influx of mobile organisms from Java, but different relationships may be discovered when flightless invertebrates are studied. Our results highlight the importance of in-depth analyses of spatial patterns of biodiversity.

Bertrand Russell: pacifismo político relativo

Directory of Open Access Journals (Sweden)

Francisco A. Laca-Arocena

2011-01-01

Full Text Available Siguiendo la biografía de Bertrand Russell (1872-1970, lógico matemático, filósofo, premio Nobel de Literatura 1950 y militante pacifista a lo largo de gran parte del conflictivo siglo XX, se analiza el doble conflicto que afronta un pacifista: de desobediencia civil a un gobierno que ha declarado una guerra y de relativa marginación social con una opinión pública cuando ésta es mayoritariamente favorable a esa guerra. Tras un breve análisis del pacifismo contrastándolo con una doble tradición en el pensamiento político anglosajón, el utilitarismo y la teoría del contrato social, se incide en la distinción personal de Russell entre guerras ¿de prestigio¿ y ¿de valores¿. Fue pacifista en la Primera Guerra Mundial considerándola una guerra de prestigio, pero fue partidario de oponerse al nazismo en la Segunda Guerra entendiendo que se trataba de un combate de valores. Volvería a un activismo pacifista en su oposición a la guerra de Vietnam. Estas diferentes posiciones ante la guerra en relación con lo que en cada caso esté en juego, se conoce como ¿pacifismo político relativo¿, cuyo representante más genuino fue el propio Russell.

A study of the German ‘Gothic’ 15^th-century equestrian armour (A21 in the Wallace Collection, London

Directory of Open Access Journals (Sweden)

Edge, David

2001-12-01

Full Text Available The most famous, indeed iconic, armour in the Wallace Collection, London, is the late 15th century German armour for man and horse (inventory number A21. Unfortunately for the historian of armour, it is also one of the most composite, having been assembled in its present form in the 19th century from elements of at least five armours. Archival research in the Wallace Collection has been combined with metallography in the Conservation Department to attempt to cast some further light upon its origins.

La armadura más famosa y emblemática de la Wallace Collection de Londres es un arnés para hombre y caballo de finales del siglo XV (inv. A.21. Desafortunadamente para la historia del arte de la armadura es también una de las más heterogéneas, compuesta en el siglo XIX con piezas procedentes de al menos otras cinco armaduras. La investigación archivística en la Wallace Collection se ha compaginado con el estudio metalográfico del Departamento de Conservación para intentar arrojar algo más de luz sobre sus orígenes.

James Bernard Russell: Scholar, collaborator, mentor

Science.gov (United States)

At the time of his untimely death in 2009, ARS scientist Dr. James B. Russell had established himself as the premier rumen microbiologist of his generation. Dr. Russell’s many contributions to the field, including much of the early work on the Cornell Net Carbohydrate System model, were the product ...

Diagnosis and management of Silver-Russell syndrome

DEFF Research Database (Denmark)

Wakeling, Emma L; Brioude, Frédéric; Lokulo-Sodipe, Oluwakemi

2017-01-01

This Consensus Statement summarizes recommendations for clinical diagnosis, investigation and management of patients with Silver-Russell syndrome (SRS), an imprinting disorder that causes prenatal and postnatal growth retardation. Considerable overlap exists between the care of individuals born s...

Epigenoty-pephenotype correlations in Silver-Russell syndrome

NARCIS (Netherlands)

Wakeling, E. L.; Abu Amero, S.; Alders, M.; Bliek, J.; Forsythe, E.; Kumar, S.; Lim, D. H.; MacDonald, F.; Mackay, D. J.; Maher, E. R.; Moore, G. E.; Poole, R. L.; Price, S. M.; Tangeraas, T.; Turner, C. L. S.; Van Haelst, M. M.; Willoughby, C.; Temple, I. K.; Cobben, J. M.

2010-01-01

Background Silver Russell syndrome (SRS) is characterised by intrauterine growth restriction, poor postnatal growth, relative macrocephaly, triangular face and asymmetry. Maternal uniparental disomy (mUPD) of chromosome 7 and hypomethylation of the imprinting control region (ICR) 1 on chromosome

Pleasure, arousal, dominance: Mehrabian and Russell revisited

NARCIS (Netherlands)

Bakker, I.C.; van der Voordt, Theo; de Boon, J; Vink, P.

2014-01-01

This paper presents a discursive review of the dimensions pleasure, arousal and dominance that Mehrabian and Russell developed in 1974 to assess environmental perception, experience, and psychological responses. Since then numerous researchers applied these dimensions to assess the experience of the

Síndrome de Silver-Russell: relato de caso Silver-Russell Syndrome: case report

Directory of Open Access Journals (Sweden)

Natalia Freitas Rossi

2006-12-01

Full Text Available OBJETIVO: descrever o fenótipo da síndrome de Silver-Russell (SSR e apresentar um caso diagnosticado com esta afecção genética, abordando aspectos genéticos, psicológicos e fonoaudiológicos. MÉTODOS: trata-se de relato de caso de uma criança do gênero feminino, sete anos e onze meses, portadora da síndrome de Silver-Russel. Foram realizadas avaliação genética médica e molecular, avaliação psicológica, avaliação fonoaudiológica e aplicação de testes complementares. RESULTADOS: a análise molecular da região 7p11 excluiu a dissomia uniparental para este caso. No exame físico foram constatados os principais sinais clínicos da SSR que incluiu retardo no crescimento de origem pré-natal, fácies típica, assimetrias ósseas e clinodactilia do 5º dedo. A avaliação cognitiva e fonoaudiológica mostraram deficiência mental, distúrbio de linguagem oral e comprometimento das funções orais. CONCLUSÃO: o estudo deste caso possibilitou a divulgação do fenótipo da SSR com suas manifestações físicas, cognitivas e fonoaudiológicas. Embora o teste molecular não tenha confirmado um dos possíveis mecanismos etiológicos da síndrome, a avaliação genética médica constatou a presença dos principais sinais clínicos que foram correlacionados à literatura. A avaliação psicológica e fonoaudiológica apontaram para comprometimento cognitivo e de comunicação, funções orais , sugerindo que importantes alterações fonoaudiológicas podem fazer parte do fenótipo desta síndrome, ainda pouco difundida para fonoaudiólogos.PURPOSE: to describe Silver-Russell syndrome (SRS phenotype and report a case with this condition, concerning genetics, psychological and speech/language and oral function evaluation. METHODS: we will submit the case of a girl, seven years and eleven months with Silver-Russell syndrome. Medical genetic evaluation, molecular test, psychological and speech/language evaluation was done. Complementary

Epigenotype-phenotype correlations in Silver-Russell syndrome

NARCIS (Netherlands)

Wakeling, E. L.; Amero, S. Abu; Alders, M.; Bliek, J.; Forsythe, E.; Kumar, S.; Lim, D. H.; Macdonald, F.; Mackay, D. J.; Maher, E. R.; Moore, G. E.; Poole, R. L.; Price, S. M.; Tangeraas, T.; Turner, C. L. S.; van Haelst, M. M.; Willoughby, C.; Temple, I. K.; Cobben, J. M.

2010-01-01

Silver-Russell syndrome (SRS) is characterised by intrauterine growth restriction, poor postnatal growth, relative macrocephaly, triangular face and asymmetry. Maternal uniparental disomy (mUPD) of chromosome 7 and hypomethylation of the imprinting control region (ICR) 1 on chromosome 11p15 are

Going the whole orang

DEFF Research Database (Denmark)

van Wyhe, John; Kjærgaard, Peter C.

2015-01-01

This article surveys the European discovery and early ideas about orangutans followed by the contrasting experiences with these animals of the co-founders of evolution by natural selection, Charles Darwin and Alfred Russel Wallace. The first non-human great ape that both of them interacted...... with was the orangutan. They were both profoundly influenced by what they saw, but the contexts of their observations could hardly be more different. Darwin met orangutans in the Zoological Gardens in London while Wallace saw them in the wild in Borneo. In different ways these observations helped shape their views...

75 FR 39046 - Russell Brands, LLC, Fabrics Division, a Subsidiary of Fruit of the Loom, Including Employees...

Science.gov (United States)

2010-07-07

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,116] Russell Brands, LLC..., 2009, applicable to workers of Russell Brands, LLC, Fabrics Division, a subsidiary of Fruit of the Loom... applicable to TA-W-71,116 is hereby issued as follows: All workers of Russell Brands, LLC, Fabric Division, a...

Supratentorial juvenile pilocytic astrocytoma in a young adult with Silver-Russell syndrome.

LENUS (Irish Health Repository)

Fenton, E

2008-12-01

Silver-Russell syndrome is a rare genetically heterogeneous disorder in which patients demonstrate intrauterine and postnatal growth retardation, triangular facies, excessive sweating during early childhood, late closure of the anterior fontanelle and skeletal asymmetry. An association with malignancy exists and only one previous intracranial tumour has been reported, a craniopharyngioma. We report the first case of Silver-Russell syndrome associated with a supratentorial juvenile pilocytic astrocytoma.

Tom Russell: "Õpetajakoolitust tuleks alustada praktikast" / Liisa Lumiste

Index Scriptorium Estoniae

Lumiste, Liisa

2013-01-01

Eduko programmi raames Tallinna Ülikoolis toimunud avalikul loengul rääkis Kanada kasvatusteadlane Tom Russell praktika tähtsusest õpetajakoolituses ja viis läbi meistriklassi õpetajakoolituse õppejõududele

Government science in postwar America: Henry A. Wallace, Edward U. Condon, and the transformation of the National Bureau of Standards, 1945-1951.

Science.gov (United States)

Lassman, Thomas C

2005-03-01

In the fall of 1945, Secretary of Commerce Henry Wallace handpicked Edward Condon, a respected theoretical physicist, to become director of the National Bureau of Standards. Already regarded by many academic and industrial scientists as a second-rate research institution, the Bureau had deteriorated further during the Great Depression. An ardent New Dealer who favored government action to prevent anticompetitive behavior in the marketplace, Wallace claimed that giant corporations leveraged their extensive patent holdings and research capabilities to manipulate markets and restrict competition at the expense of smaller firms without similar resources. Through a revitalized Bureau of Standards, Wallace intended to mitigate monopolistic behavior among large companies by transforming the Department of Commerce into an effective clearinghouse for scientific research that would stimulate technological innovation in small businesses. The Bureau's postwar expansion, however, foundered on congressional efforts to dismantle the legacies of the New Deal, Condon's lack of commitment to the technical requirements of the small business community, and the intense competition for resources within an institutionally pluralist federal research establishment dominated by the exigencies of the Cold War. Without sufficient financial support from congressional appropriations committees, Condon turned to the military to fund new research programs at the Bureau of Standards. These programs, however, owed their institutional growth to the demands of the national security state, not to the fading influence of Henry Wallace's New Deal liberalism.

Russel Nye: The Professor in Public Life.

Science.gov (United States)

Hungiville, Maurice

1995-01-01

A discussion of the influence of Russel Nye, a college English professor at Michigan State University and journalist, focuses on the values that shaped his teaching, scholarship, and writing and his defense of democratic values, especially in education. It is concluded that Nye's experience suggests that public service can be a source of personal…

Precision Joining Center

Science.gov (United States)

Powell, J. W.; Westphal, D. A.

1991-08-01

A workshop to obtain input from industry on the establishment of the Precision Joining Center (PJC) was held on July 10-12, 1991. The PJC is a center for training Joining Technologists in advanced joining techniques and concepts in order to promote the competitiveness of U.S. industry. The center will be established as part of the DOE Defense Programs Technology Commercialization Initiative, and operated by EG&G Rocky Flats in cooperation with the American Welding Society and the Colorado School of Mines Center for Welding and Joining Research. The overall objectives of the workshop were to validate the need for a Joining Technologists to fill the gap between the welding operator and the welding engineer, and to assure that the PJC will train individuals to satisfy that need. The consensus of the workshop participants was that the Joining Technologist is a necessary position in industry, and is currently used, with some variation, by many companies. It was agreed that the PJC core curriculum, as presented, would produce a Joining Technologist of value to industries that use precision joining techniques. The advantage of the PJC would be to train the Joining Technologist much more quickly and more completely. The proposed emphasis of the PJC curriculum on equipment intensive and hands-on training was judged to be essential.

Redescription of the type of Lomaptera cambodiensis Wallace, and its allocation to Ischiopsopha gestro (Coleoptera, Cetoniidae)

NARCIS (Netherlands)

Willemstein, S.C.

1971-01-01

During my study of the Cetoniid genus Thaumastopeus Kraatz, I found Lomaptera cambodiensis Wallace, 1867, listed under Thaumastopeus in Junk's Coleopterorum Catalogus (Schenkling, 1921). A male specimen in the collection of the late F. T. Valck Lucassen (containing material ex coll. O. E. Janson and

Russell bodies in a skin biopsy: a case report

Directory of Open Access Journals (Sweden)

Verheij Joanne

2009-11-01

Full Text Available Abstract Introduction The presence of eosinophilic bodies in a skin biopsy can be found in a variety of situations and this may present a challenge to the pathologist. The differential diagnosis of these eosinophilic structures include microorganisms such as histoplasmosis or cryptococcosis, fungi, Michaelis-Gutmann bodies, deposits of amyloid or immunoglobulins, colloid bodies or elastic bodies. Case presentation During a routine examination of a skin biopsy with actinic keratosis taken from the cheek of a 61-year-old man, clusters of eosinophilic bodies were seen within an inflammatory infiltrate in the dermis, both intracytoplasmic and extracellular. Using additional immunohistochemical staining, these structures were identified as polyclonal Russell bodies. Conclusion The differential diagnosis of intracytoplasmic eosinophilic structures in a skin biopsy includes Russell bodies, an uncommon finding that may be associated with chronic inflammatory conditions.

Is Russell's vicious circle principle false or meaningless?

NARCIS (Netherlands)

Fleischhacker, L.E.

1979-01-01

P. Vardy asserts the thesis that the vicious circle principle has the same structure as Russell's paradox. But structure is not the thing itself. It is the thing objectivated from the wiewpoint of a mathematician. So this structure can be expressed in a mathematical formalism, e. g. the Λ-calculus.

FILSAFAT ANALITIK Kritik Epistemologi Ide Analitik Logis Bertrand Russell

Directory of Open Access Journals (Sweden)

Muhmidayeli Muhmidayeli

2016-03-01

Full Text Available Abstract:Each logical statement reflected in the way expressed in a logical language. If a statement is expressed by a language that one would then have it wrong, therefore, necessary test of logical forms that fit with the empirical facts. In short every statement must be understood by returning to the real meaning or context. Russell offers a translation grammatically any statement that may seem misleading to the appropriate forms and logical. Bertrand Russell described his philosophy asan area of human thought that was between theology on the one hand and science on the other side. Philosophy can be said astheology, due to the nature and character of philosophy which also contains a world speculations about the definitive knowledge, but it can notbe ascertained. On the other hand, itcan be said as science, because the working procedures of philosophy that is moreleads and functioning sense like science knowledge (science. Anydogma, because it transcends knowledge certainly, including in the sphere of theology. In between there is this no man's land area that is prone to both theology and science issues. Abstrak: Setiap penyataan logis tercermin dari cara mengungkapkannya dalam bahasa logis. Jika suatu pernyataan diungkap dengan bahasa yang salah maka akan memiliki maka yang salah, oleh karena itu, diperlukan uji bentuk-bentuk logis yang cocok dengan dengan fakta empiris. Pendeknya setiap pernyataan mesti dipahami dengan mengembalikannya pada makna riil atau kontekstual. Russell menawarkan pener¬jemahan secara gramatikal setiap pernyataan yang mungkin saja tampak me¬nyesat¬¬kan ke dalam bentuk-bentuk yang tepat dan logis. Bertrand Russell menggambarkan filsafat sebagai suatu wilayah pemikiran manusia yang berada antara teologi di satu sisi dan ilmu pengetahuan di sisi lainnya. Filsafat dapat dikatakan seperti teologi, karena sifat dan watak filsafat yang juga bersikan dunia spekulasi-spekulasi tentang pengetahun yang pasti namun ia tidak

A case of Silver–Russell syndrome (SRS): multiple pituitary ...

Indian Academy of Sciences (India)

Hypomethylation of the imprinting control region 1 (ICR1) at the IGF2/H19 locus on 11p15 is linked to Silver–Russell syndrome .... lowing criteria have to be met: low birth weight, short stature ..... school-aged children and adolescents. Bull.

76 FR 23342 - Russell Investment Management Company, et al.;

Science.gov (United States)

2011-04-26

...] Russell Investment Management Company, et al.; Notice of Application April 20, 2011. AGENCY: Securities...: Applicants request an order that would permit (a) series of certain open-end management investment companies... registered management investment companies and unit investment trusts outside of the same group of investment...

Determination of spatial parameters for different star groups in the Hertzsprung-Russell diagram

International Nuclear Information System (INIS)

Kharadze, E.K.; Bartaya, R.A.; Vereshchagin, S.V.; Dluzhnevskaya, O.B.; Pavlovskaya, E.D.; Piskunov, A.Eh.; AN SSSR, Moscow. Astronomicheskij Sovet; Moskovskij Gosudarstvennyj Univ.

1987-01-01

Space densities and parameters of z-distribution for ten star groups in the Hertzsprung - Russell diagram (A - K3, A - G4, A - G5) were determined. Data from the Abastumani two-dimensional spectral classification catalogue, and a statistical procedure of data processing, allowing to take into account uncertainties of observational data as well as the catalogue selection effect, were used. The study of the space distributions allowed to carry out an independent estimation of a luminosity dispersion for different sequences in the Hertsprung - Russell diagram

Pleasure, arousal, dominance: Mehrabian and Russell revisited

OpenAIRE

Bakker, I.C.; van der Voordt, Theo; de Boon, J; Vink, P.

2014-01-01

This paper presents a discursive review of the dimensions pleasure, arousal and dominance that Mehrabian and Russell developed in 1974 to assess environmental perception, experience, and psychological responses. Since then numerous researchers applied these dimensions to assess the experience of the physical environment and its perceived qualities. Although the dimensions appeared to be useful, there is a long-lasting debate going on among environmental psychologists about the interpretation ...

Fast and scalable inequality joins

KAUST Repository

Khayyat, Zuhair

2016-09-07

Inequality joins, which is to join relations with inequality conditions, are used in various applications. Optimizing joins has been the subject of intensive research ranging from efficient join algorithms such as sort-merge join, to the use of efficient indices such as (Formula presented.)-tree, (Formula presented.)-tree and Bitmap. However, inequality joins have received little attention and queries containing such joins are notably very slow. In this paper, we introduce fast inequality join algorithms based on sorted arrays and space-efficient bit-arrays. We further introduce a simple method to estimate the selectivity of inequality joins which is then used to optimize multiple predicate queries and multi-way joins. Moreover, we study an incremental inequality join algorithm to handle scenarios where data keeps changing. We have implemented a centralized version of these algorithms on top of PostgreSQL, a distributed version on top of Spark SQL, and an existing data cleaning system, Nadeef. By comparing our algorithms against well-known optimization techniques for inequality joins, we show our solution is more scalable and several orders of magnitude faster. © 2016 Springer-Verlag Berlin Heidelberg

Altered states, altered spaces : architecture, space and landscape in the film and television of Stanley Kubrick and Ken Russell

OpenAIRE

Melia, Matthew

2017-01-01

Altered States, Altered Spaces: Architecture, Landscape and Space in the work of Stanley Kubrick and Ken Russell.\\ud \\ud Stanley Kubrick and Ken Russell, at first, seem like unlikely bedfellows for a critical comparison: the combined Baroque, Mannerist, frequently excessive and romantic nature of Russell’s screen standing in apparent contrast to the structure, order, organisation, Brutalism and spatial complexity of Kubrick’s.\\ud \\ud In an online blogpost1 (2007) Russell biographer Paul Sutto...

Joining of advanced materials

CERN Document Server

Messler, Robert W

1993-01-01

Provides an unusually complete and readable compilation of the primary and secondary options for joining conventional materials in non-conventional ways. Provides unique coverage of adhesive bonding using both organic and inorganic adhesives, cements and mortars. Focuses on materials issues without ignoring issues related to joint design, production processing, quality assurance, process economics, and joining performance in service.Joining of advanced materials is a unique treatment of joining of both conventional and advanced metals andalloys, intermetallics, ceramics, glasses, polymers, a

Henry Agard Wallace, the Iowa Corn Yield Tests, and the Adoption of Hybrid Corn

OpenAIRE

Richard C. Sutch

2008-01-01

This research report makes the following claims: 1] There was not an unambiguous economic advantage of hybrid corn over the open-pollinated varieties in 1936. 2] The early adoption of hybrid corn before 1937 can be better explained by a sustained propaganda campaign conducted by the U.S. Department of Agriculture at the direction of the Secretary of Agriculture, Henry Agard Wallace. The Department's campaign echoed that of the commercial seed companies. The most prominent hybrid seed company,...

Joining by plastic deformation

DEFF Research Database (Denmark)

Mori, Ken-ichiro; Bay, Niels; Fratini, Livan

2013-01-01

As the scale and complexity of products such as aircraft and cars increase, demand for new functional processes to join mechanical parts grows. The use of plastic deformation for joining parts potentially offers improved accuracy, reliability and environmental safety as well as creating opportuni......As the scale and complexity of products such as aircraft and cars increase, demand for new functional processes to join mechanical parts grows. The use of plastic deformation for joining parts potentially offers improved accuracy, reliability and environmental safety as well as creating...

Ceramic joining

Energy Technology Data Exchange (ETDEWEB)

Loehman, R.E. [Sandia National Lab., Albuquerque, NM (United States)

1996-04-01

This paper describes the relation between reactions at ceramic-metal interfaces and the development of strong interfacial bonds in ceramic joining. Studies on a number of systems are described, including silicon nitrides, aluminium nitrides, mullite, and aluminium oxides. Joints can be weakened by stresses such as thermal expansion mismatch. Ceramic joining is used in a variety of applications such as solid oxide fuel cells.

The Joint Philosophical Program of Russell and Wittgenstein and Its Demise

Directory of Open Access Journals (Sweden)

Nikolay Milkov

2013-03-01

Full Text Available Between April and November 1912, Bertrand Russell and Ludwig Wittgenstein were engaged in a joint philosophical program. Wittgenstein’s meeting with Gottlob Frege in December 1912 led, however, to its dissolution—the joint program was abandoned. Section 1 of this paper outlines the key points of that program, identifying what Russell and Wittgenstein each contributed to it. The second section determines precisely those features of their collaborative work that Frege criticized. Finally, building upon the evidence developed in the first two sections, section 3 recasts along previously undeveloped lines Wittgensein’s logical–philosophical discoveries in the two years following his encounter with Frege in 1912. The paper concludes, in section 4, with an overview of the dramatic consequences the Frege–Wittgenstein critique had for Russell’s philosophical development.

A man before his time: Russell's insights into nicotine, smoking, treatment and curbing the smoking problem.

Science.gov (United States)

McNeill, Ann; Robson, Debbie

2018-04-01

This narrative review aimed to provide a brief overview of five key research 'classics' produced by the innovative and radical thought leader, Professor Michael Anthony Hamilton Russell (1932-2009), drawing upon his other work wherever feasible. Narrative review. From more than 250 publications, we selected papers we considered seminal texts, published in 1971, 1976, 1978, 1979 and 1991. Russell was among the first researchers to explain that smoking was a dependence disorder caused by the drug nicotine decades before this was recognized formally. He therefore saw quickly the importance of delivering nicotine in a less harmful format as a way of controlling nicotine withdrawal when stopping smoking, first studying nicotine gum. In addition to pharmacotherapies, Russell's research also explored the role of behavioural support, particularly the role of general practitioners (GPs), alone as well as supported by specialist clinics; this research underpinned initiatives in England to reimburse doctors for giving advice to smokers, and to provide a national network of smoking cessation services. Research on nicotine uptake from other delivery systems and routes led Russell to theorize that the speed and dose of delivery impacted upon the effectiveness of a product to act as a substitute for smoking. He commented on the addictiveness of the high nicotine boli delivered in quick succession when smoking cigarettes and argued that alternative recreational nicotine delivery systems would need to be promoted actively to smokers in order for them to compete with cigarettes, a forerunner for contemporary debates on electronic cigarettes. The legacy of Russell's landmark research is seen in present-day nicotine science, policy and discourse. © 2017 Society for the Study of Addiction.

Darwin vs. Wallace: When Poetry Dies and When Poetry Survives in the Not-so-Natural Selection of Memetic Evolution

Science.gov (United States)

Christensen, Bryce

2011-01-01

The theory of memetic evolution--explaining the reproduction of cultural units called "memes"--illuminates the decline of poetry as a cultural presence by clarifying the contrasting attitudes towards poetry manifested by the co-discoverers of natural selection: Charles Darwin and Alfred Wallace. Darwin's eventual indifference to poetry…

Chrysler Upset Protrusion Joining Techniques for Joining Dissimilar Metals

Energy Technology Data Exchange (ETDEWEB)

Logan, Stephen [FCA US LLC, Auburn Hills, MI (United States)

2017-09-28

The project goal was to develop and demonstrate a robust, cost effective, and versatile joining technique, known as Upset Protrusion Joining (UPJ), for joining challenging dissimilar metal com-binations, especially those where one of the metals is a die cast magnesium (Mg) component. Since two of the key obstacles preventing more widespread use of light metals (especially in high volume automotive applications) are 1) a lack of robust joining techniques and 2) susceptibility to galvanic corrosion, and since the majority of the joint combinations evaluated in this project include die cast Mg (the lightest structural metal) as one of the two materials being joined, and since die casting is the most common and cost effective process for producing Mg components, then successful project completion provides a key enabler to high volume application of lightweight materials, thus potentially leading to reduced costs, and encouraging implementation of lightweight multi-material vehicles for significant reductions in energy consumption and reduced greenhouse gas emissions. Eco-nomic benefits to end-use consumers are achieved primarily via the reduction in fuel consumption. Unlike currently available commercial processes, the UPJ process relies on a very robust mechanical joint rather than intermetallic bonding, so the more cathodic material can be coated prior to joining, thus creating a robust isolation against galvanic attack on the more anodic material. Additionally, since the UPJ protrusion is going through a hole that can be pre-drilled or pre-punched prior to coating, the UPJ process is less likely to damage the coating when the joint is being made. Further-more, since there is no additional cathodic material (such as a steel fastener) used to create the joint, there is no joining induced galvanic activity beyond that of the two parent materials. In accordance with its originally proposed plan, this project has successfully developed process variants of UPJ to enable

Join Operations in Temporal Databases

DEFF Research Database (Denmark)

Gao, D.; Jensen, Christian Søndergaard; Snodgrass, R.T.

2005-01-01

Joins are arguably the most important relational operators. Poor implementations are tantamount to computing the Cartesian product of the input relations. In a temporal database, the problem is more acute for two reasons. First, conventional techniques are designed for the evaluation of joins...... with equality predicates rather than the inequality predicates prevalent in valid-time queries. Second, the presence of temporally varying data dramatically increases the size of a database. These factors indicate that specialized techniques are needed to efficiently evaluate temporal joins. We address...... this need for efficient join evaluation in temporal databases. Our purpose is twofold. We first survey all previously proposed temporal join operators. While many temporal join operators have been defined in previous work, this work has been done largely in isolation from competing proposals, with little...

Venom Concentrations and Clotting Factor Levels in a Prospective Cohort of Russell's Viper Bites with Coagulopathy.

Directory of Open Access Journals (Sweden)

Geoffrey K Isbister

Full Text Available Russell's viper envenoming is a major problem in South Asia and causes venom induced consumption coagulopathy. This study aimed to investigate the kinetics and dynamics of venom and clotting function in Russell's viper envenoming.In a prospective cohort of 146 patients with Russell's viper envenoming, we measured venom concentrations, international normalised ratio [INR], prothrombin time (PT, activated partial thromboplastin time (aPTT, coagulation factors I, II, V, VII, VIII, IX and X, and von Willebrand factor antigen. The median age was 39 y (16-82 y and 111 were male. The median peak INR was 6.8 (interquartile range [IQR]: 3.7 to >13, associated with low fibrinogen [median,3 at 6 h post-antivenom but had reduced to <2, by 24 h. The aPTT had also returned to close to normal (<50 sec at 24 h. Factor VII, VIII and IX levels were unusually high pre-antivenom, median peak concentrations of 393%, 307% and 468% respectively. Pre-antivenom venom concentrations and the INR (r = 0.20, p = 0.02 and aPTT (r = 0.19, p = 0.03 were correlated (non-parametric Spearman analysis.Russell's viper coagulopathy results in prolonged aPTT, INR, low fibrinogen, factors V, VIII and X which recover over 48 h. Severity of clotting abnormalities was associated with venom concentrations.

Biochemical nature of Russell Bodies.

Science.gov (United States)

Mossuto, Maria Francesca; Ami, Diletta; Anelli, Tiziana; Fagioli, Claudio; Doglia, Silvia Maria; Sitia, Roberto

2015-07-30

Professional secretory cells produce and release abundant proteins. Particularly in case of mutations and/or insufficient chaperoning, these can aggregate and become toxic within or amongst cells. Immunoglobulins (Ig) are no exception. In the extracellular space, certain Ig-L chains form fibrils causing systemic amyloidosis. On the other hand, Ig variants lacking the first constant domain condense in dilated cisternae of the early secretory compartment, called Russell Bodies (RB), frequently observed in plasma cell dyscrasias, autoimmune diseases and chronic infections. RB biogenesis can be recapitulated in lymphoid and non-lymphoid cells by expressing mutant Ig-μ, providing powerful models to investigate the pathophysiology of endoplasmic reticulum storage disorders. Here we analyze the aggregation propensity and the biochemical features of the intra- and extra-cellular Ig deposits in human cells, revealing β-aggregated features for RB.

Blind-date Conversation Joining

Directory of Open Access Journals (Sweden)

Luca Cesari

2013-07-01

Full Text Available We focus on a form of joining conversations among multiple parties in service-oriented applications where a client may asynchronously join an existing conversation without need to know in advance any information about it. More specifically, we show how the correlation mechanism provided by orchestration languages enables a form of conversation joining that is completely transparent to clients and that we call 'blind-date joining'. We provide an implementation of this strategy by using the standard orchestration language WS-BPEL. We then present its formal semantics by resorting to COWS, a process calculus specifically designed for modelling service-oriented applications. We illustrate our approach by means of a simple, but realistic, case study from the online games domain.

Woods and Russell, Hill, and the emergence of medical statistics.

Science.gov (United States)

Farewell, Vern; Johnson, Tony

2010-06-30

In 1937, Austin Bradford Hill wrote Principles of Medical Statistics (Lancet: London, 1937) that became renowned throughout the world and is widely associated with the birth of modern medical statistics. Some 6 years earlier Hilda Mary Woods and William Thomas Russell, colleagues of Hill at the London School of Hygiene and Tropical Medicine, wrote a similar book An Introduction to Medical Statistics (PS King and Son: London, 1931) that is little known today. We trace the origins of these two books from the foundations of early demography and vital statistics, and make a detailed examination of some of their chapters. It is clear that these texts mark a watershed in the history of medical statistics that demarcates the vital statistics of the nineteenth and early twentieth centuries from the modern discipline. Moreover, we consider that the book by Woods and Russell is of some importance in the development of medical statistics and we describe and acknowledge their place in the history of this discipline. (c) 2010 John Wiley & Sons, Ltd.

Evolution of sexual dichromatism in relation to nesting habits in European passerines: a test of Wallace's hypothesis.

Science.gov (United States)

Soler, J J; Moreno, J

2012-08-01

Wallace proposed in 1868 that natural rather than sexual selection could explain the striking differences in avian plumage dichromatism. Thus, he predicted that nesting habits, through their association with nest predation, could drive changes in sexual dichromatism by enabling females in cavity nesters to become as conspicuous as males, whereas Darwin (1871, The Descent of Man and Selection in Relation to Sex, John Murray, London) argued that sexual selection was the sole explanation for dichromatism. Sexual dichromatism is currently used as indicating the strength of sexual selection, and therefore testing Wallace's claim with modern phylogentically controlled methodologies is of prime interest for comparing the roles of natural and sexual selection in affecting the evolution of avian coloration. Here, we have related information on nest attendance, sexual dichromatism and nesting habits (open and cavity nesting) to male and female plumage conspicuousness in European passerines. Nest incubation attendance does not explain male or female plumage conspicuousness but nest type does. Moreover, although females of monochromatic and cavity nesting species are more conspicuous than females of other species, males of monochromatic and open nesting species are those with more cryptic plumage. Finally, analyses of character evolution suggest that changes in nesting habits influence the probability of changes in both dichromatism and plumage conspicuousness of males but do not significantly affect those in females. These results strongly suggest a role of nesting habits in the evolution of plumage conspicuousness of males, and a role for sexual selection also in females, both factors affecting the evolution of sexual dichromatism. We discuss our findings in relation to the debate that Darwin and Wallace maintained more than one century ago on the importance of natural and sexual selection in driving the evolution of plumage conspicuousness and sexual dichromatism in birds

Lightning Fast and Space Efficient Inequality Joins

KAUST Repository

Khayyat, Zuhair

2015-09-01

Inequality joins, which join relational tables on inequality conditions, are used in various applications. While there have been a wide range of optimization methods for joins in database systems, from algorithms such as sort-merge join and band join, to various indices such as B+-tree,R*-tree and Bitmap, inequality joins have received little attention and queries containing such joins are usually very slow. In this paper, we introduce fast inequality join algorithms. We put columns to be joined in sorted arrays and we use permutation arrays to encode positions of tuples in one sorted array w.r.t. the other sorted array. In contrast to sort-merge join, we use space effcient bit-arrays that enable optimizations, such as Bloom filter indices, for fast computation of the join results. We have implemented a centralized version of these algorithms on top of PostgreSQL, and a distributed version on top of Spark SQL. We have compared against well known optimization techniques for inequality joins and show that our solution is more scalable and several orders of magnitude faster.

Lightning fast and space efficient inequality joins

KAUST Repository

Khayyat, Zuhair

2015-09-01

Inequality joins, which join relational tables on inequality conditions, are used in various applications. While there have been a wide range of optimization methods for joins in database systems, from algorithms such as sort-merge join and band join, to various indices such as B+-tree, R*-tree and Bitmap, inequality joins have received little attention and queries containing such joins are usually very slow. In this paper, we introduce fast inequality join algorithms. We put columns to be joined in sorted arrays and we use permutation arrays to encode positions of tuples in one sorted array w.r.t. the other sorted array. In contrast to sort-merge join, we use space efficient bit-arrays that enable optimizations, such as Bloom filter indices, for fast computation of the join results. We have implemented a centralized version of these algorithms on top of PostgreSQL, and a distributed version on top of Spark SQL. We have compared against well known optimization techniques for inequality joins and show that our solution is more scalable and several orders of magnitude faster.

Lightning fast and space efficient inequality joins

KAUST Repository

Khayyat, Zuhair; Lucia, William; Singh, Meghna; Ouzzani, Mourad; Papotti, Paolo; Quiané -Ruiz, Jorge-Arnulfo; Tang, Nan; Kalnis, Panos

2015-01-01

Inequality joins, which join relational tables on inequality conditions, are used in various applications. While there have been a wide range of optimization methods for joins in database systems, from algorithms such as sort-merge join and band join, to various indices such as B+-tree, R*-tree and Bitmap, inequality joins have received little attention and queries containing such joins are usually very slow. In this paper, we introduce fast inequality join algorithms. We put columns to be joined in sorted arrays and we use permutation arrays to encode positions of tuples in one sorted array w.r.t. the other sorted array. In contrast to sort-merge join, we use space efficient bit-arrays that enable optimizations, such as Bloom filter indices, for fast computation of the join results. We have implemented a centralized version of these algorithms on top of PostgreSQL, and a distributed version on top of Spark SQL. We have compared against well known optimization techniques for inequality joins and show that our solution is more scalable and several orders of magnitude faster.

76 FR 20388 - Russell Investment Company, et al.; Notice of Application

Science.gov (United States)

2011-04-12

...: Applicants request an order to permit open-end management investment companies relying on rule 12d1-2 under... Investment Funds (each a ``Trust and collectively the ``Trusts), Russell Investment Management Company... Blass, Branch Chief, at (202) 551-6821 (Division of Investment Management, Office of Investment Company...

Bertrand Russell : [poems] / Jaan Kaplinski ; transl. by the author, ed. by Fiona Sampson

Index Scriptorium Estoniae

Kaplinski, Jaan, 1941-

2003-01-01

Autori lühitutvustus lk. 266. Sisu: Bertrand Russell ; "Once again I think of what I have read..." ; "I do not feel at home in this synthetic world..." ; "Silence is always here and everywhere..." ; "In the morning, I was presented to President Mitterrand..." ; Evening is coming. The land and the forest meet..." ; " A cloudy afternoon in late autumn..." ; "My poems often aren't poems..." ; "My eyesight's weakening...". Orig.: Bertrand Russell ; Mõtlen taas loetule..." ; "Ei ole kodune siin sünteetilises maailmas..." ; "Vaikus on alati siin..." ; "Hommikul tutvustati mind president Mitterrandile.." ; "Õhtu tuleb ja maa ja mets saavad kokku..." ; "Pilvealune südasügise-pärastlõuna..." ; "Mu luuletused ei ole tihti luuletused..." ; "Silmad on nõrgaks jäänd..."

Joining uranium to steel

International Nuclear Information System (INIS)

Perkins, M.A.

1976-05-01

A method has been devised which will allow the joining of uranium to steel by fusion welding through the use of an intermediate material. Uranium-0.5 titanium was joined to AISI 304L stainless steel by using a vanadium insert. Also, a method is now available for selecting possible filler metals when two entirely dissimilar metals need to be joined. This method allows a quantitative ranking to be made of the possible filler metals and thus the most likely candidate can be selected

Russell's Unknown Logicism A Study in the History and Philosophy of Mathematics

CERN Document Server

Gandon, Professor Sebastien

2012-01-01

In this excellent book Sebastien Gandon focuses mainly on Russell's two major texts, Principa Mathematica and Principle of Mathematics, meticulously unpicking the details of these texts and bringing a new interpretation of both the mathematical and the philosophical content.

Authenticated join processing in outsourced databases

KAUST Repository

Yang, Yin

2009-01-01

Database outsourcing requires that a query server constructs a proof of result correctness, which can be verified by the client using the data owner\\'s signature. Previous authentication techniques deal with range queries on a single relation using an authenticated data structure (ADS). On the other hand, authenticated join processing is inherently more complex than ranges since only the base relations (but not their combination) are signed by the owner. In this paper, we present three novel join algorithms depending on the ADS availability: (i) Authenticated Indexed Sort Merge Join (AISM), which utilizes a single ADS on the join attribute, (ii) Authenticated Index Merge Join (AIM) that requires an ADS (on the join attribute) for both relations, and (iii) Authenticated Sort Merge Join (ASM), which does not rely on any ADS. We experimentally demonstrate that the proposed methods outperform two benchmark algorithms, often by several orders of magnitude, on all performance metrics, and effectively shift the workload to the outsourcing service. Finally, we extend our techniques to complex queries that combine multi-way joins with selections and projections. ©2009 ACM.

Authenticated join processing in outsourced databases

KAUST Repository

Yang, Yin; Papadias, Dimitris; Papadopoulos, Stavros; Kalnis, Panos

2009-01-01

Database outsourcing requires that a query server constructs a proof of result correctness, which can be verified by the client using the data owner's signature. Previous authentication techniques deal with range queries on a single relation using an authenticated data structure (ADS). On the other hand, authenticated join processing is inherently more complex than ranges since only the base relations (but not their combination) are signed by the owner. In this paper, we present three novel join algorithms depending on the ADS availability: (i) Authenticated Indexed Sort Merge Join (AISM), which utilizes a single ADS on the join attribute, (ii) Authenticated Index Merge Join (AIM) that requires an ADS (on the join attribute) for both relations, and (iii) Authenticated Sort Merge Join (ASM), which does not rely on any ADS. We experimentally demonstrate that the proposed methods outperform two benchmark algorithms, often by several orders of magnitude, on all performance metrics, and effectively shift the workload to the outsourcing service. Finally, we extend our techniques to complex queries that combine multi-way joins with selections and projections. ©2009 ACM.

A reflection on Russell's ramified types and Kripke's hierarchy of truths

NARCIS (Netherlands)

Kamareddine, F.; Laan, T.D.L.

1996-01-01

Both in Kripke's Theory of Truth KTT [8] and Russell's Ramified Type Theory RTT [16, 9] we are confronted with some hierarchy. In RTT, we have a double hierarchy of orders and types. That is, the class of propositions is divided into different orders where a propositional function can only depend on

Parallel trajectory similarity joins in spatial networks

KAUST Repository

Shang, Shuo

2018-04-04

The matching of similar pairs of objects, called similarity join, is fundamental functionality in data management. We consider two cases of trajectory similarity joins (TS-Joins), including a threshold-based join (Tb-TS-Join) and a top-k TS-Join (k-TS-Join), where the objects are trajectories of vehicles moving in road networks. Given two sets of trajectories and a threshold θ, the Tb-TS-Join returns all pairs of trajectories from the two sets with similarity above θ. In contrast, the k-TS-Join does not take a threshold as a parameter, and it returns the top-k most similar trajectory pairs from the two sets. The TS-Joins target diverse applications such as trajectory near-duplicate detection, data cleaning, ridesharing recommendation, and traffic congestion prediction. With these applications in mind, we provide purposeful definitions of similarity. To enable efficient processing of the TS-Joins on large sets of trajectories, we develop search space pruning techniques and enable use of the parallel processing capabilities of modern processors. Specifically, we present a two-phase divide-and-conquer search framework that lays the foundation for the algorithms for the Tb-TS-Join and the k-TS-Join that rely on different pruning techniques to achieve efficiency. For each trajectory, the algorithms first find similar trajectories. Then they merge the results to obtain the final result. The algorithms for the two joins exploit different upper and lower bounds on the spatiotemporal trajectory similarity and different heuristic scheduling strategies for search space pruning. Their per-trajectory searches are independent of each other and can be performed in parallel, and the mergings have constant cost. An empirical study with real data offers insight in the performance of the algorithms and demonstrates that they are capable of outperforming well-designed baseline algorithms by an order of magnitude.

Parallel trajectory similarity joins in spatial networks

KAUST Repository

Shang, Shuo; Chen, Lisi; Wei, Zhewei; Jensen, Christian S.; Zheng, Kai; Kalnis, Panos

2018-01-01

The matching of similar pairs of objects, called similarity join, is fundamental functionality in data management. We consider two cases of trajectory similarity joins (TS-Joins), including a threshold-based join (Tb-TS-Join) and a top-k TS-Join (k-TS-Join), where the objects are trajectories of vehicles moving in road networks. Given two sets of trajectories and a threshold θ, the Tb-TS-Join returns all pairs of trajectories from the two sets with similarity above θ. In contrast, the k-TS-Join does not take a threshold as a parameter, and it returns the top-k most similar trajectory pairs from the two sets. The TS-Joins target diverse applications such as trajectory near-duplicate detection, data cleaning, ridesharing recommendation, and traffic congestion prediction. With these applications in mind, we provide purposeful definitions of similarity. To enable efficient processing of the TS-Joins on large sets of trajectories, we develop search space pruning techniques and enable use of the parallel processing capabilities of modern processors. Specifically, we present a two-phase divide-and-conquer search framework that lays the foundation for the algorithms for the Tb-TS-Join and the k-TS-Join that rely on different pruning techniques to achieve efficiency. For each trajectory, the algorithms first find similar trajectories. Then they merge the results to obtain the final result. The algorithms for the two joins exploit different upper and lower bounds on the spatiotemporal trajectory similarity and different heuristic scheduling strategies for search space pruning. Their per-trajectory searches are independent of each other and can be performed in parallel, and the mergings have constant cost. An empirical study with real data offers insight in the performance of the algorithms and demonstrates that they are capable of outperforming well-designed baseline algorithms by an order of magnitude.

On the Expressiveness of Joining

Directory of Open Access Journals (Sweden)

Thomas Given-Wilson

2015-08-01

Full Text Available The expressiveness of communication primitives has been explored in a common framework based on the pi-calculus by considering four features: synchronism (asynchronous vs synchronous, arity (monadic vs polyadic data, communication medium (shared dataspaces vs channel-based, and pattern-matching (binding to a name vs testing name equality vs intensionality. Here another dimension coordination is considered that accounts for the number of processes required for an interaction to occur. Coordination generalises binary languages such as pi-calculus to joining languages that combine inputs such as the Join Calculus and general rendezvous calculus. By means of possibility/impossibility of encodings, this paper shows coordination is unrelated to the other features. That is, joining languages are more expressive than binary languages, and no combination of the other features can encode a joining language into a binary language. Further, joining is not able to encode any of the other features unless they could be encoded otherwise.

A new cycle of jökulhlaups at Russell Glacier, Kangerlussuaq, West Greenland

DEFF Research Database (Denmark)

Russell, Andrew J.; Carrivick, Jonathan L.; Ingeman-Nielsen, Thomas

2011-01-01

years. Robust calculations of lake volumes and peak discharges are made, based onintensive field surveys and utilizing high-spatial-resolution orthophotographs of the lake basin and icemargin. These data enable identification of controls on the behaviour of the ice-dammed lake andprovide the first field......Jokulhlaups in 2007 and 2008 from an ice-dammed lake at the northern margin of RussellGlacier, West Greenland, marked the onset of a renewed jokulhlaup cycle after 20 years of stability. Wepresent a record of successive ice-dammed lake drainage events and associated ice-margin dynamicsspanning 25......-based examination of controls on jokulhlaup magnitude and frequency for thissystem. We find that Russell Glacier jokulhlaups have a much higher peak discharge than predicted bythe Clague–Mathews relationship, which we attribute to an unusually short englacial/subglacialrouteway and the presence of a thin ice dam...

Common Influence Join

DEFF Research Database (Denmark)

Yiu, Man Lung; Mamoulis, Nikos; Karras, Panagiotis

2008-01-01

We identify and formalize a novel join operator for two spatial pointsets P and Q. The common influence join (CIJ) returns the pairs of points (p,q),p isin P,q isin Q, such that there exists a location in space, being closer to p than to any other point in P and at the same time closer to q than ......-demand, is very efficient in practice, incurring only slightly higher I/O cost than the theoretical lower bound cost for the problem....

Detection of venom after antivenom is not associated with persistent coagulopathy in a prospective cohort of Russell's viper (Daboia russelii envenomings.

Directory of Open Access Journals (Sweden)

Kalana Maduwage

2014-12-01

Full Text Available Venom recurrence or persistence in the circulation after antivenom treatment has been documented many times in viper envenoming. However, it has not been associated with clinical recurrence for many snakes, including Russell's viper (Daboia spp.. We compare the recovery of coagulopathy to the recurrence or persistence of venom in patients with Russell's viper envenoming.The study included patients with Russell's viper (D. russelii envenoming presenting over a 30 month period who had Russell's viper venom detected by enzyme immunoassay. Demographics, information on the snake bite, and clinical effects were collected for all patients. All patients had serum collected for venom specific enzyme immunoassay and citrate plasma to measure fibrinogen levels and prothrombin time (international normalised ratio; INR. Patients with venom recurrence/persistence were compared to those with no detectable recurrence of venom. There were 55 patients with confirmed Russell's viper envenoming and coagulopathy with low fibrinogen concentrations: 31 with venom recurrence/persistence, and 24 with no venom detected post-antivenom. Fibrinogen concentrations increased and INR decreased after antivenom in both the recurrence and non-recurrence patients. Clinical features, laboratory parameters, antivenom dose and length of hospital were similar for both groups. Pre-antivenom venom concentrations were higher in patients with venom recurrence/persistence with a median venom concentration of 385 ng/mL (16-1521 ng/mL compared to 128 ng/mL (14-1492 ng/mL; p = 0.008.Recurrence of Russell's viper venom was not associated with a recurrence of coagulopathy and length of hospital stay. Further work is required to determine if the detection of venom recurrence is due to the venom specific enzyme immunoassay detecting both venom-antivenom complexes as well as free venom.

Speeding Up Neighbour-Joining Tree Construction

DEFF Research Database (Denmark)

Brodal, Gerth Stølting; Fagerberg, Rolf; Mailund, Thomas

A widely used method for constructing phylogenetic trees is the neighbour-joining method of Saitou and Nei. We develope heuristics for speeding up the neighbour-joining method which generate the same phylogenetic trees as the original method. All heuristics are based on using a quad-tree to guide...... the search for the next pair of nodes to join, but di#er in the information stored in quad-tree nodes, the way the search is performed, and in the way the quad-tree is updated after a join. We empirically evaluate the performance of the heuristics on distance matrices obtained from the Pfam collection...... of alignments, and compare the running time with that of the QuickTree tool, a well-known and widely used implementation of the standard neighbour-joining method. The results show that the presented heuristics can give a significant speed-up over the standard neighbour-joining method, already for medium sized...

Oceanic archipelagos

DEFF Research Database (Denmark)

Triantis, Kostas A.; Whittaker, Robert James; Fernández-Palacios, José María

2016-01-01

Since the contributions of Charles Darwin and Alfred Russel Wallace, oceanic archipelagos have played a central role in the development of biogeography. However, despite the critical influence of oceanic islands on ecological and evolutionary theory, our focus has remained limited to either the i...... of the archipelagic geological dynamics that can affect diversity at both the island and the archipelagic level. We also reaffirm that oceanic archipelagos are appropriate spatiotemporal units to frame analyses in order to understand large scale patterns of biodiversity....

A Case of Monoclonal Lymphoplasmacytosis of the Bone Marrow with IgM-Positive Russell Bodies

Directory of Open Access Journals (Sweden)

Hidekazu Kayano

2011-01-01

Full Text Available A 71-year-old Japanese male patient infected with HCV was diagnosed with thrombocytopenia. Histological examination of the bone marrow aspirate showed numerous lymphoid aggregates with Russell bodies. Immunohistochemistry and flow cytometric analysis demonstrated clonal expansion of CD5+ CD23+ B cells. Russell bodies were positive for IgM and lambda immunoglobulin light chain. The patient also underwent gastric biopsy, which revealed Helicobacter pylori (HP infection. Subsequent eradication of the bacteria resulted in improvement of his thrombocytopenia. The clinical course remained uneventful at 15-month follow-up, consistent with monoclonal B-cell lymphocytosis. The observed clonal expansion with plasmacytic differentiation may have occurred under the influence of HCV with HP infection.

Efficient Joins with Compressed Bitmap Indexes

Energy Technology Data Exchange (ETDEWEB)

Computational Research Division; Madduri, Kamesh; Wu, Kesheng

2009-08-19

We present a new class of adaptive algorithms that use compressed bitmap indexes to speed up evaluation of the range join query in relational databases. We determine the best strategy to process a join query based on a fast sub-linear time computation of the join selectivity (the ratio of the number of tuples in the result to the total number of possible tuples). In addition, we use compressed bitmaps to represent the join output compactly: the space requirement for storing the tuples representing the join of two relations is asymptotically bounded by min(h; n . cb), where h is the number of tuple pairs in the result relation, n is the number of tuples in the smaller of the two relations, and cb is the cardinality of the larger column being joined. We present a theoretical analysis of our algorithms, as well as experimental results on large-scale synthetic and real data sets. Our implementations are efficient, and consistently outperform well-known approaches for a range of join selectivity factors. For instance, our count-only algorithm is up to three orders of magnitude faster than the sort-merge approach, and our best bitmap index-based algorithm is 1.2x-80x faster than the sort-merge algorithm, for various query instances. We achieve these speedups by exploiting several inherent performance advantages of compressed bitmap indexes for join processing: an implicit partitioning of the attributes, space-efficiency, and tolerance of high-cardinality relations.

Diagnosis and management of Silver-Russell syndrome

DEFF Research Database (Denmark)

Wakeling, Emma L; Brioude, Frédéric; Lokulo-Sodipe, Oluwakemi

2017-01-01

small for gestational age and those with SRS. However, many specific management issues exist and evidence from controlled trials remains limited. SRS is primarily a clinical diagnosis; however, molecular testing enables confirmation of the clinical diagnosis and defines the subtype. A 'normal' result......This Consensus Statement summarizes recommendations for clinical diagnosis, investigation and management of patients with Silver-Russell syndrome (SRS), an imprinting disorder that causes prenatal and postnatal growth retardation. Considerable overlap exists between the care of individuals born...... from a molecular test does not exclude the diagnosis of SRS. The management of children with SRS requires an experienced, multidisciplinary approach. Specific issues include growth failure, severe feeding difficulties, gastrointestinal problems, hypoglycaemia, body asymmetry, scoliosis, motor...

Welding and Joining of Titanium Aluminides

Science.gov (United States)

Cao, Jian; Qi, Junlei; Song, Xiaoguo; Feng, Jicai

2014-01-01

Welding and joining of titanium aluminides is the key to making them more attractive in industrial fields. The purpose of this review is to provide a comprehensive overview of recent progress in welding and joining of titanium aluminides, as well as to introduce current research and application. The possible methods available for titanium aluminides involve brazing, diffusion bonding, fusion welding, friction welding and reactive joining. Of the numerous methods, solid-state diffusion bonding and vacuum brazing have been most heavily investigated for producing reliable joints. The current state of understanding and development of every welding and joining method for titanium aluminides is addressed respectively. The focus is on the fundamental understanding of microstructure characteristics and processing–microstructure–property relationships in the welding and joining of titanium aluminides to themselves and to other materials. PMID:28788113

Welding and Joining of Titanium Aluminides

Directory of Open Access Journals (Sweden)

Jian Cao

2014-06-01

Full Text Available Welding and joining of titanium aluminides is the key to making them more attractive in industrial fields. The purpose of this review is to provide a comprehensive overview of recent progress in welding and joining of titanium aluminides, as well as to introduce current research and application. The possible methods available for titanium aluminides involve brazing, diffusion bonding, fusion welding, friction welding and reactive joining. Of the numerous methods, solid-state diffusion bonding and vacuum brazing have been most heavily investigated for producing reliable joints. The current state of understanding and development of every welding and joining method for titanium aluminides is addressed respectively. The focus is on the fundamental understanding of microstructure characteristics and processing–microstructure–property relationships in the welding and joining of titanium aluminides to themselves and to other materials.

Findings from the Evaluation of the National Library Power Program. Executive Summary. An Initiative of the DeWitt Wallace-Reader's Digest Fund.

Science.gov (United States)

Zweizig, Douglas; Hopkins, Dianne McAfee

This document presents the executive summary of an evaluation of Library Power, a program of the DeWitt Wallace-Reader's Digest Fund to enhance and elevate the role of libraries in public schools. The report begins with an examination of Library Power's core components (collection development, facilities refurbishing, flexible scheduling,…

Researcher Profile: An Interview with Russell James, JD, PhD, CFP(R

Directory of Open Access Journals (Sweden)

Russell James

2014-03-01

Full Text Available Russell James is a professor and the CH Foundation Chair in Personal Financial Planning in the Department of Personal Financial Planning at Texas Tech University, where he is also the Director of Graduate Studies in Charitable Financial Planning. His research is focused on encouraging generosity and satisfaction in financial decision-making.

Alfred Russel Wallace’s record of his consignments to Samuel Stevens, 1854-1861

NARCIS (Netherlands)

Baker, D.B.

2001-01-01

An annotated facsimile of those pages of Alfred Russel Wallace’s notebook recording his consignments from the Malay Archipelago to his London agent, Samuel Stevens, is provided. Records of individual consignments are linked with the stages of Wallace’s and Charles Allen’s itineraries to which they

Ring-constrained Join

DEFF Research Database (Denmark)

Yiu, Man Lung; Karras, Panagiotis; Mamoulis, Nikos

2008-01-01

. This new operation has important applications in decision support, e.g., placing recycling stations at fair locations between restaurants and residential complexes. Clearly, RCJ is defined based on a geometric constraint but not on distances between points. Thus, our operation is fundamentally different......We introduce a novel spatial join operator, the ring-constrained join (RCJ). Given two sets P and Q of spatial points, the result of RCJ consists of pairs (p, q) (where p ε P, q ε Q) satisfying an intuitive geometric constraint: the smallest circle enclosing p and q contains no other points in P, Q...

Destructive Cholangitis in an Adult Jack Russell Terrier

Directory of Open Access Journals (Sweden)

Atsushi Kodama

2012-01-01

Full Text Available A 4-year-old female Jack Russell terrier dog exhibited vomiting and severe jaundice of the visible mucous membranes and skin. Ultrasonography revealed diffuse areas of high echogenicity and focal areas of low echogenicity in the left lobe of the liver. On macroscopic observation of the biopsied liver specimen, many scattered irregularly shaped red spots were observed on the liver surface and on the cut surface. Histopathologically, there was loss of the interlobular bile duct and cholangitis accompanied by infiltration of pigment-laden macrophages in the Glisson’s capsule. Therefore, in the present case the dog was diagnosed with destructive cholangitis.

The Reflection Effect on the Eclipsing Binary by the Wilson and Devinney's Model and Russell and Merrill's Model

Directory of Open Access Journals (Sweden)

Seong Hee Choea

1992-06-01

Full Text Available The reflection effect on three types of eclipsing binaries has been analyzed Wilson and Devinney's model and Russell and Merrill's model. The reflection effect was displayed on the theoretical light curves for the various conditions using the Wilson and Devinney's light curve program. Two models were compared after the rectifing the theoretical light curves including the reflection effect with the Russell and Merrill's method. The result shows that two models have an agreement on the reflection effect just in cases of the small difference in temperature and albedo between two stars in the system.

Hubbard Glacier, Alaska: growing and advancing in spite of global climate change and the 1986 and 2002 Russell Lake outburst floods

Science.gov (United States)

Trabant, Dennis C.; March, Rod S.; Thomas, Donald S.

2003-01-01

Hubbard Glacier, the largest calving glacier on the North American Continent (25 percent larger than Rhode Island), advanced across the entrance to 35-mile-long Russell Fiord during June 2002, temporarily turning it into a lake. Hubbard Glacier has been advancing for more than 100 years and has twice closed the entrance to Russell Fiord during the last 16 years by squeezing and pushing submarine glacial sediments across the mouth of the fiord. Water flowing into the cutoff fiord from mountain streams and glacier melt causes the level of Russell Lake to rise. However, both the 1986 and 2002 dams failed before the lake altitude rose enough for water to spill over a low pass at the far end of the fiord and enter the Situk River drainage, a world-class sport and commercial fishery near Yakutat, Alaska.

Trajectory similarity join in spatial networks

KAUST Repository

Shang, Shuo

2017-09-07

The matching of similar pairs of objects, called similarity join, is fundamental functionality in data management. We consider the case of trajectory similarity join (TS-Join), where the objects are trajectories of vehicles moving in road networks. Thus, given two sets of trajectories and a threshold θ, the TS-Join returns all pairs of trajectories from the two sets with similarity above θ. This join targets applications such as trajectory near-duplicate detection, data cleaning, ridesharing recommendation, and traffic congestion prediction. With these applications in mind, we provide a purposeful definition of similarity. To enable efficient TS-Join processing on large sets of trajectories, we develop search space pruning techniques and take into account the parallel processing capabilities of modern processors. Specifically, we present a two-phase divide-and-conquer algorithm. For each trajectory, the algorithm first finds similar trajectories. Then it merges the results to achieve a final result. The algorithm exploits an upper bound on the spatiotemporal similarity and a heuristic scheduling strategy for search space pruning. The algorithm\\'s per-trajectory searches are independent of each other and can be performed in parallel, and the merging has constant cost. An empirical study with real data offers insight in the performance of the algorithm and demonstrates that is capable of outperforming a well-designed baseline algorithm by an order of magnitude.

Recrafting the neighbor-joining method

Directory of Open Access Journals (Sweden)

Pedersen Christian NS

2006-01-01

Full Text Available Abstract Background The neighbor-joining method by Saitou and Nei is a widely used method for constructing phylogenetic trees. The formulation of the method gives rise to a canonical Θ(n3 algorithm upon which all existing implementations are based. Results In this paper we present techniques for speeding up the canonical neighbor-joining method. Our algorithms construct the same phylogenetic trees as the canonical neighbor-joining method. The best-case running time of our algorithms are O(n2 but the worst-case remains O(n3. We empirically evaluate the performance of our algoritms on distance matrices obtained from the Pfam collection of alignments. The experiments indicate that the running time of our algorithms evolve as Θ(n2 on the examined instance collection. We also compare the running time with that of the QuickTree tool, a widely used efficient implementation of the canonical neighbor-joining method. Conclusion The experiments show that our algorithms also yield a significant speed-up, already for medium sized instances.

Willmore energy for joining of carbon nanostructures

Science.gov (United States)

Sripaturad, P.; Alshammari, N. A.; Thamwattana, N.; McCoy, J. A.; Baowan, D.

2018-06-01

Numerous types of carbon nanostructure have been found experimentally, including nanotubes, fullerenes and nanocones. These structures have applications in various nanoscale devices and the joining of these structures may lead to further new configurations with more remarkable properties and applications. The join profile between different carbon nanostructures in a symmetric configuration may be modelled using the calculus of variations. In previous studies, carbon nanostructures were assumed to deform according to perfect elasticity, thus the elastic energy, depending only on the axial curvature, was used to determine the join profile consisting of a finite number of discrete bonds. However, one could argue that the relevant energy should also involve the rotational curvature, especially when its size is comparable to the axial curvature. In this paper, we use the Willmore energy, a natural generalisation of the elastic energy that depends on both the axial and rotational curvatures. Catenoids are absolute minimisers of this energy and pieces of these may be used to join various nanostructures. We focus on the cases of joining a fullerene to a nanotube and joining two fullerenes along a common axis. By comparing our results with the earlier work, we find that both energies give similar joining profiles. Further work on other configurations may reveal which energy provides a better model.

Russell body apical periodontitis: an unusual case report.

Science.gov (United States)

Dos Santos, Jean Nunes; Ramos, Eduardo Antônio Gonçalves; Gurgel, Clarissa Araújo Silva; Barros, Adna Conceição; de Freitas, André Carlos; Crusoé-Rebello, Iêda Maria

2008-12-01

Russell bodies (RBs) changes in chronic apical lesions have rarely been reported in the literature. We describe a case of a periapical lesion abundantly and extensively composed of RB. Microscopic examination showed accumulation of plasma cells containing globular, spherical, polygonal, and eosinophilic structures against fibrous connective tissue. Initial diagnostic considerations based on a smaller magnification included hypersecretory plasmocytoma, although there was no evidence of infiltrative growth, mitotic activity, nuclear atypia, or cellular pleomorphism. Then, a panel of immunohistochemical markers was applied and the cells showed positivity with both kappa and lambda chains demonstrating their polyclonal origin. The extensive accumulation of RBs involving the periapical region represents an unreported and significant histologic change, as it was mimicking a malignant neoplasm.

Prenatal molecular testing for Beckwith-Wiedemann and Silver-Russell syndromes

DEFF Research Database (Denmark)

Eggermann, Thomas; Brioude, Frédéric; Russo, Silvia

2016-01-01

Beckwith-Wiedemann and Silver-Russell syndromes (BWS/SRS) are two imprinting disorders (IDs) associated with disturbances of the 11p15.5 chromosomal region. In BWS, epimutations and genomic alterations within 11p15.5 are observed in >70% of patients, whereas in SRS they are observed in about 60% ......, the consequences for prenatal genetic testing and counseling and our cumulative experience in dealing with these disorders.European Journal of Human Genetics advance online publication, 28 October 2015; doi:10.1038/ejhg.2015.224....

A petition to Mr Peel: Gideon Mantell and the trial of Hannah Russell.

Science.gov (United States)

Flanagan, R J; Watson, K D

2009-07-01

In the summer of 1826, Hannah Russell was tried for petty treason, viz. the murder of her husband, Benjamin Russell, by poisoning. Their lodger, Daniel Leney, was indicted as her accomplice. The exact circumstances surrounding the death were unclear but Hannah was known to have purchased white arsenic (arsenious oxide). A local surgeon, Thomas Evans, supported at the post-mortem examination by two further surgeons, not only reported severe corrosion of the gastrointestinal tract, but also the recovery of nearly an eighth of an ounce of arsenic from the victim's stomach. Both accused were convicted and sentenced to death. Leney was executed, but Hannah Russell was respited because the trial judge, Sir Robert Graham, had doubts as to a direction he had given to the jury. The surgeon and paleontologist Gideon Mantell took up her case, stressing that death from arsenic could not have taken place as quickly as was alleged and maintaining that the chemical evidence of arsenic poisoning was inconclusive. He gained the support of some eminent chemists and physicians. Subsequently, forensic toxicologists [Sir] Robert Christison and Alfred Swaine Taylor pointed out that Mantell's arguments as to the possible time to death in arsenic poisoning were quite wrong. Moreover, Evans gave details of the analyses he and his colleagues had undertaken to Christison, who pronounced the findings sound, as indeed did Mantell after Evans and his colleagues published details of their investigations in the Sussex Advertiser. Papers in The National Archives show that Hannah was pardoned for the offence for which she was indicted, leaving it open to prefer a lesser charge. That this was never done may have been due to Mantell's campaign, at least in part, but the pardon she did receive was due to the concern of the trial judge as to the implications of the evidence presented at trial.

MICROWAVE JOINING OF ALUMINA CERAMIC AND HYDROXYLAPATITE BIOCERAMIC

Institute of Scientific and Technical Information of China (English)

无

1999-01-01

Microwave joining is a rapid developmental new techniqu e in recent years.This paper introduces a new microwave joining equipment which was made by our lab,succeeds in alumina ceramic-hydroxylapatite bioceramic j o in in the equipment, and analyzes the join situation of join boundary by using s canni ng electron microscope(SEM),this paper analyzes the mechanism of microwave joini ng also.

Prospects of joining multi-material structures

Science.gov (United States)

Sankaranarayanan, R.; Hynes, N. Rajesh Jesudoss

2018-05-01

Spring up trends and necessities make the pipelines for the brand new Technologies. The same way, Multimaterial structures emerging as fruitful alternatives for the conventional structures in the manufacturing sector. Especially manufacturing of transport vehicles is placing a perfect platform for these new structures. Bonding or joining technology plays a crucial role in the field of manufacturing for sustainability. These latest structures are purely depending on such joining technologies so that multi-material structuring can be possible practically. The real challenge lies on joining dissimilar materials of different properties and nature. Escalation of thermoplastic usage in large structural components also faces similar ambiguity for joining multi-material structures. Adhesive bonding, mechanical fastening and are the answering technologies for multi-material structures. This current paper analysis the prospects of these bonding technologies to meet the challenges of tomorrow.

Conjoint Forming - Technologies for Simultaneous Forming and Joining

International Nuclear Information System (INIS)

Groche, P; Wohletz, S; Mann, A; Krech, M; Monnerjahn, V

2016-01-01

The market demand for new products optimized for e. g. lightweight applications or smart components leads to new challenges in production engineering. Hybrid structures represent one promising approach. They aim at higher product performance by using a suitable combination of different materials. The developments of hybrid structures stimulate the research on joining of dissimilar materials. Since they allow for joining dissimilar materials without external heating technologies based on joining by plastic deformation seem to be of special attractiveness. The paper at hand discusses the conjoint forming approach. This approach combines forming and joining in one process. Two or more workpieces are joined while at least one workpiece is plastically deformed. After presenting the fundamental joining mechanisms, the conjoint forming approach is discussed comprehensively. Examples of conjoint processes demonstrate the effectiveness and reveal the underlying phenomena. (paper)

Family caregiver distress with children having rare genetic disorders: a qualitative study involving Russell-Silver Syndrome in Taiwan.

Science.gov (United States)

Weng, Hsin-Ju; Niu, Dau-Ming; Turale, Sue; Tsao, Lee-Ing; Shih, Fu-Jong; Yamamoto-Mitani, Noriko; Chang, Chun-Chi; Shih, Fu-Jin

2012-01-01

To extend nursing knowledge of distress experienced by family caregivers of children with rare genetic disorders, by exploring the perspectives of caregivers of children with Russell-Silver Syndrome in Taiwan. Caring for a child with a rare genetic disorder often has profound effects on families, especially when diagnosis and treatment is complex or not yet well developed, such as that in Russell-Silver Syndrome (or Silver-Russell syndrome). This disorder causes dwarfism and developmental difficulties, requiring long-term care planning. Previous research has focused mostly on medical care, but little is known about families' perspectives of caring difficulties, the help they need and nursing care required. An exploratory qualitative approach was used to inform this study. Family caregivers, whose children were undergoing medical care in a leading Taiwan medical centre, were invited to participate in face-to-face, in-depth interviews. Data were analysed by content analysis. Fifteen caregivers including 11 mothers, two fathers and two grandmothers participated. Five major themes and 13 sub-themes of care-giving distress were identified: endless psychological worries; the lengthy process to confirm a medical diagnosis; adjustment efforts in modifying family roles; dilemmas in deciding between Western or Chinese traditional medicine; and negative responses to society's concerns. Their primary sources of support were spouses, parents and health professionals, accordingly. Complex physio-psycho-social and decision-making distress in caring for children with a rare genetic disorder were systematically revealed from the perspectives of ethnic-Chinese family caregivers. Long-term care plans for children with a rare genetic disorder such as Russell-Silver Syndrome need to focus on positive dynamic family interactions, life-stage development and family caregiver support. Research on care-giving in rare genetic disorders is also warranted across cultures and countries to

Instrument evaluation no. 5. Wallac OY universal radiation survey meter type RD-8

International Nuclear Information System (INIS)

White, D.F.; Blundell, D.R.; Callowhill, K.; Iles, W.J.

1976-05-01

The Wallace RD-8 is a portable, battery-operated survey meter covering an exposure rate range from 0.01 mR/h to 300 R/h. The instrument was designed specifically for military and civil defence applications and is accordingly of particularly rugged construction and claimed to be both waterproof and shockproof. This instrument is unusual in that it has two internally mounted radiation detectors. An end-window GM tube is used to cover the range from 0.01 to 300 mR/h, and a GM tube covers the range from 0.01 to 300 R/h. Both tubes have energy compensation sheaths for the measurement of photon radiation in the forward direction. Only the first tube permits the measurement of β-radiation. The information is given under the following headings; Facilities and controls; radiation characteristics; electrical characteristics; environmental characteristics; mechanical characteristics; summary of performance; calibration procedure; conclusions. (U.K.)

Rooseveltův muž v Trumanově době: Henry A. Wallace a jeho postoje k zahraniční politice Spojených států amerických ve 40. a 50. letech 20. století

OpenAIRE

Rýgrová, Pavla

2016-01-01

This thesis is dedicated to the rupture between Henry A. Wallace and Truman's administration during the forties of the twentieth century, that is mainly to the Wallace's disagreement with the Democratic Party regarding U. S.-Soviet relations. Disapproval of the former Roosevelt's vicepresident with the official standing of the American foreign policy ultimately lead to his presidency candidacy in 1948 and to the creation of protest Progressive Party, which was supposed to shield this candidac...

Thin layer joining by gas adsorption

Energy Technology Data Exchange (ETDEWEB)

Taga, Yasunori, E-mail: y-taga@isc.chubu.ac.jp; Fukumura, Toshio

2014-10-01

Highlights: • We report thin layer molecular joining between glass and COP by gas adsorption. Thickness of joining layer is 1–2 nm and joining process was carried out at low temperature at about 100 °C. • Adhesion strength measured by 180 degree peel test revealed to be 1–10 N/25 mm and the joined stack showed high durability for practical use. - Abstract: Attempt has been made to join borosilicate glass and cycloolefin (COP) polymer film by using gas adsorption method. After corona plasma treat, COP was exposed to (3-glycidoxypropyl) trimethoxysilane (GPS) and glass to (3-aminopropyl) triethoxysilane (APS) both in air atmosphere, resulting in co-adsorption of water vapor in the atmosphere and organosilane gases. Surface characterization of plasma treated and gas adsorbed surfaces was carried out by X-ray photoelectron spectroscopy (XPS) using Mg Kα X-ray source. Joining was carried out by a roll laminator after contact of both surfaces at room temperature, followed by annealing at 130 °C for 10 min. Adhesion strength was evaluated by 180 degree peel test based on ASTM D-903 and durability was examined under the conditions of 60 °C and 95% RH. It was found that after plasma treatment, complex functional groups such as C-H, C-O, C=O, O-C=O and CO{sub 3} were found on COP and O-H on glass. Thickness of GPS gas adsorption layer on COP was evaluated by the XPS to be at least 1.1 nm by taking inelastic mean free path of Si{sub 2p} photoelectron into consideration. Joining force was found to be more than 5 N/25 mm corresponding to almost equal to COP bulk tensile strength. In addition, durability of this adhesion strength remained unchanged over 2000 h even after exposure to the durability test conditions of 60 °C and 95% RH. The results can be explained in terms of formation of H-H hydrogen bonding and Si-O covalent bonding via silanols will be made at the interface as a result of lamination and annealing processes. In conclusion, ultrathin joining method

Spatio-temporal joins on symbolic indoor tracking data

DEFF Research Database (Denmark)

Lu, Hua; Yang, Bin; Jensen, Christian S.

2011-01-01

and studies probabilistic, spatio-temporal joins on historical indoor tracking data. Two meaningful types of join are defined. They return object pairs that satisfy spatial join predicates either at a time point or during a time interval. The predicates considered include “same X,” where X is a semantic...

Boolean Operations, Joins, and the Extended Low Hierarchy

OpenAIRE

Hemaspaandra, Lane A.; Jiang, Zhigen; Rothe, Joerg; Watanabe, Osamu

1999-01-01

We prove that the join of two sets may actually fall into a lower level of the extended low hierarchy than either of the sets. In particular, there exist sets that are not in the second level of the extended low hierarchy, EL_2, yet their join is in EL_2. That is, in terms of extended lowness, the join operator can lower complexity. Since in a strong intuitive sense the join does not lower complexity, our result suggests that the extended low hierarchy is unnatural as a complexity measure. We...

Reminiscences on the 40th anniversary of the Russell-Einstein Manifesto

International Nuclear Information System (INIS)

Rotblat, J.

1997-01-01

After 40 years the main message of the Russell-Einstein Manifesto stands out clearly in its relevance to the hiroshima tragedy: 'Shall we put an end to the human race: or shall mankind renounce war?' With the end of the titanic struggle between Communism and Anti-Communism, the immediate threat of nuclear holocaust has abated, but the potential threat to the existence of mankind is still existing, and always will be. Pugwash has achieved much during the 40 years, but much more remains to be achieved

Joining elements of silicon carbide

International Nuclear Information System (INIS)

Olson, B.A.

1979-01-01

A method of joining together at least two silicon carbide elements (e.g.in forming a heat exchanger) is described, comprising subjecting to sufficiently non-oxidizing atmosphere and sufficiently high temperature, material placed in space between the elements. The material consists of silicon carbide particles, carbon and/or a precursor of carbon, and silicon, such that it forms a joint joining together at least two silicon carbide elements. At least one of the elements may contain silicon. (author)

Recrafting the Neighbor-Joining Method

DEFF Research Database (Denmark)

Mailund; Brodal, Gerth Stølting; Fagerberg, Rolf

2006-01-01

Background: The neighbor-joining method by Saitou and Nei is a widely used method for constructing phylogenetic trees. The formulation of the method gives rise to a canonical Θ(n3) algorithm upon which all existing implementations are based. Methods: In this paper we present techniques for speeding...... up the canonical neighbor-joining method. Our algorithms construct the same phylogenetic trees as the canonical neighbor-joining method. The best-case running time of our algorithms are O(n2) but the worst-case remains O(n3). We empirically evaluate the performance of our algoritms on distance...... matrices obtained from the Pfam collection of alignments. Results: The experiments indicate that the running time of our algorithms evolve as Θ(n2) on the examined instance collection. We also compare the running time with that of the QuickTree tool, a widely used efficient implementation of the canonical...

Join or be excluded from biomedicine? JOINS and Post-colonial Korea.

Science.gov (United States)

Ma, Eunjeong

2015-04-01

This paper discusses re-emergence of Korean medicine(s) in the global context with a focus on a natural drug JOINS, a highly contentious drug regarding its legal status. By following through its life world, the paper contends that the drug is the embodiment of the postcolonial anxiety that crosses the intersections between the aspiring nation and globalizing strategies of the bio-pharmaceutical industry. JOINS is a natural drug prescribed to alleviate the symptoms of degenerative arthritis. SK Chemicals, Ltd., a giant domestic pharmaceutical company developed the drug by utilizing the knowledge of traditional pharmacopeia and put it on the market in 2001. In the domestic market, the drug is treated as a prescription drug, implying that Western medicine-trained doctors (as opposed to Korean medicine doctors) are entitled to prescribe drugs. It also indicates that the drug has undergone a series of lab tests such as toxicity, efficacy, and clinical trials in compliance with regulatory guidelines. However, the domestic standards are not rigorous enough to satisfy international standards, so that it is exported as a nutritional supplement abroad. The government, the pharmaceutical industry, and the Western medicine profession are happy with how the drug stands domestically and internationally. Rather, it is Korean doctors who try to disrupt the status quo and reclaim their rights to traditional knowledge, who have been alienated from the pharmaceuticalization of traditional knowledge. Thus, the JOINS tablet embodies the complex web of modern Korean society, professional interests, the pharmaceutical industry, and globalization.

Intentional Excellence in the Baldwin Wallace University Neuroscience Program

Science.gov (United States)

Morris, Jacqueline K.; Peppers, Kieth; Mickley, G. Andrew

2015-01-01

The Society for Neuroscience recognized Baldwin Wallace University’s (BWU) undergraduate Neuroscience program as their Program of the Year for 2012. This award acknowledged the “accomplishments of a neuroscience department or program for excellence in educating neuroscientists and providing innovative models to which other programs can aspire.” The Neuroscience program grew out of students interested in studying the biological basis of behavior. BWU’s neuroscience major is research-intensive, and all students are required to produce an empirically-based senior thesis. This requirement challenges program resources, and the demand for faculty attention is high. Thus, we developed an intentional 3-step peer mentoring system that encourages our students to collaborate with and learn from, not only faculty, but each other. Peer mentoring occurs in the curriculum, faculty research labs, and as students complete their senior theses. As the program has grown with over 80 current majors, we have developed a new Neuroscience Methods course to train students on the safety, ethics, and practice of research in the neuroscience laboratory space. Students in this course leave with the skills and knowledge to assist senior level students with their theses and to begin the process of developing their own projects in the laboratory. Further, our students indicate that their “peer mentorship was excellent,” “helped them gain confidence,” and “allowed them to be more successful in their research.” PMID:26240522

Cancer and Evolution

International Nuclear Information System (INIS)

Guevara Pardo, Gonzalo

2001-01-01

First it was the luminous idea of the natural selection, proposed by Alfred Russell Wallace and Talk Darwin, the one that allowed understanding the way as the living organisms are evolve. Then they were the brilliant Francis Crick and James Watson who discovered the curvilinear molecule of deoxyribonucleic acid (DNA) and then it was the great explosion of the molecular biology. The cancer, illness that wakes up our deepest fears, is analyzed in this article from an evolutionary conception that could give us a road but appropriate to understand it and maybe to guide us toward better therapeutic options

76 FR 14101 - Bruss North America; Russell Springs, KY; Bruss North America; Orion, MI; Amended Revised...

Science.gov (United States)

2011-03-15

... America; Russell Springs, KY; Bruss North America; Orion, MI; Amended Revised Determination on... relevant time period at the Orion, Michigan location of Bruss North America, Inc. The Orion, Michigan..., Kentucky facility also led to worker separations at the Orion, Michigan location during the relevant time...

JOINING DISSIMILAR MATERIALS USING FRICTION STIR SCRIBE TECHNIQUE

Energy Technology Data Exchange (ETDEWEB)

Upadhyay, Piyush; Hovanski, Yuri; Jana, Saumyadeep; Fifield, Leonard S.

2016-09-01

Development of robust and cost effective method of joining dissimilar materials can provide a critical pathway to enable widespread use of multi-material design and components in mainstream industrial applications. The use of multi-material components such as Steel-Aluminum, Aluminum-Polymer allows design engineers to optimize material utilization based on service requirements and often lead weight and cost reductions. However producing an effective joint between materials with vastly different thermal, microstructural and deformation response is highly problematic using conventional joining and /or fastening methods. This is especially challenging in cost sensitive high volume markets that largely rely on low–cost joining solutions. Friction Stir Scribe technology was developed to meet the demands of joining materials with drastically different properties and melting regimes. The process enables joining of light metals like Magnesium and Aluminum to high temperature materials like Steels and Titanium. Additionally viable joints between polymer composites and metal can also be made using this method. This paper will present state of the art, progress made and challenges associated with this innovative derivative of Friction Stir welding in reference to joining dissimilar metals and polymer/metal combinations.

Joining Dissimilar Materials Using Friction Stir Scribe Technique

Energy Technology Data Exchange (ETDEWEB)

Upadhyay, Piyush [Pacific Northwest National Laboratory, Richland 99352, WA e-mail: piyush.upadhyay@pnnl.gov; Hovanski, Yuri [Pacific Northwest National Laboratory, Richland 99352, WA; Jana, Saumyadeep [Pacific Northwest National Laboratory, Richland 99352, WA; Fifield, Leonard S. [Pacific Northwest National Laboratory, Richland 99352, WA

2016-10-03

Development of a robust and cost-effective method of joining dissimilar materials could provide a critical pathway to enable widespread use of multi-material designs and components in mainstream industrial applications. The use of multi-material components such as steel-aluminum and aluminum-polymer would allow design engineers to optimize material utilization based on service requirements and could often lead to weight and cost reductions. However, producing an effective joint between materials with vastly different thermal, microstructural, and deformation responses is highly problematic using conventional joining and/or fastening methods. This is especially challenging in cost sensitive, high volume markets that largely rely on low cost joining solutions. Friction stir scribe technology was developed to meet the demands of joining materials with drastically different properties and melting regimes. The process enables joining of light metals like magnesium and aluminum to high temperature materials like steel and titanium. Viable joints between polymer composites and metal can also be made using this method. This paper will present the state of the art, progress made, and challenges associated with this innovative derivative of friction stir welding in reference to joining dissimilar metals and polymer/metal combinations.

Joining of porous silicon carbide bodies

Science.gov (United States)

Bates, Carl H.; Couhig, John T.; Pelletier, Paul J.

1990-05-01

A method of joining two porous bodies of silicon carbide is disclosed. It entails utilizing an aqueous slip of a similar silicon carbide as was used to form the porous bodies, including the sintering aids, and a binder to initially join the porous bodies together. Then the composite structure is subjected to cold isostatic pressing to form a joint having good handling strength. Then the composite structure is subjected to pressureless sintering to form the final strong bond. Optionally, after the sintering the structure is subjected to hot isostatic pressing to further improve the joint and densify the structure. The result is a composite structure in which the joint is almost indistinguishable from the silicon carbide pieces which it joins.

Efficient string similarity join in multi-core and distributed systems.

Directory of Open Access Journals (Sweden)

Cairong Yan

Full Text Available In big data area a significant challenge about string similarity join is to find all similar pairs more efficiently. In this paper, we propose a parallel processing framework for efficient string similarity join. First, the input is split into some disjoint small subsets according to the joint frequency distribution and the interval distribution of strings. Then the filter-verification strategy is adopted in the computation of string similarity for each subset so that the number of candidate pairs is reduced before an effective pruning strategy is used to improve the performance. Finally, the operation of string join is executed in parallel. Para-Join algorithm based on the multi-threading technique is proposed to implement the framework in a multi-core system while Pada-Join algorithm based on Spark platform is proposed to implement the framework in a cluster system. We prove that Para-Join and Pada-Join cannot only avoid reduplicate computation but also ensure the completeness of the result. Experimental results show that Para-Join can achieve high efficiency and significantly outperform than state-of-the-art approaches, meanwhile, Pada-Join can work on large datasets.

The Lauramann Howe Russell Papers: a Window into Critical Care Medicine during the American Civil War.

Science.gov (United States)

Gorbaty, Benjamin

2017-10-01

The Civil War influenced all aspects of American society and culture, including the field of medicine and critical care. Union physician Lauramann Howe Russell's letter to his daughter, Ellen Howe, written on October 19, 1862, illustrates the changes in hospital construction, gender roles in healthcare and medical treatments which revolutionized healthcare during the Civil War. This letter offers a glimpse of the medical care of wounded soldiers during the early years of the Civil War. In describing his conversion hospital, he reveals the precursor to the new hospital construction which would greatly influence hospital design for decades to come. His description of women volunteers hints at the evolving role and growing importance of women in healthcare. Finally, the advancements in surgical and medical practice which developed during the Civil War are embodied in Russell's descriptions of his patients. His letter freezes a moment in medical history, bridging the gap between archaic medical practice and modern critical care. Copyright © 2017 Elsevier Inc. All rights reserved.

A Modeling Approach for Plastic-Metal Laser Direct Joining

Science.gov (United States)

Lutey, Adrian H. A.; Fortunato, Alessandro; Ascari, Alessandro; Romoli, Luca

2017-09-01

Laser processing has been identified as a feasible approach to direct joining of metal and plastic components without the need for adhesives or mechanical fasteners. The present work sees development of a modeling approach for conduction and transmission laser direct joining of these materials based on multi-layer optical propagation theory and numerical heat flow simulation. The scope of this methodology is to predict process outcomes based on the calculated joint interface and upper surface temperatures. Three representative cases are considered for model verification, including conduction joining of PBT and aluminum alloy, transmission joining of optically transparent PET and stainless steel, and transmission joining of semi-transparent PA 66 and stainless steel. Conduction direct laser joining experiments are performed on black PBT and 6082 anticorodal aluminum alloy, achieving shear loads of over 2000 N with specimens of 2 mm thickness and 25 mm width. Comparison with simulation results shows that consistently high strength is achieved where the peak interface temperature is above the plastic degradation temperature. Comparison of transmission joining simulations and published experimental results confirms these findings and highlights the influence of plastic layer optical absorption on process feasibility.

Applying Item Response Theory Modeling in Educational Research

Science.gov (United States)

Le, Dai-Trang

2013-01-01

In an effort to understand how school boards in America's K-12 school system function, a research collaboration was undertaken among four agencies: the National School Boards Association, the Thomas B. Fordham Institute, the Iowa Association of School Boards, and the Wallace Foundation. These groups joined effort to conduct research on school…

QuickJoin—Fast Neighbour-Joining Tree Reconstruction

DEFF Research Database (Denmark)

Mailund; Pedersen, Christian N. Storm

2004-01-01

We have built a tool for fast construction of very large phylogenetic trees. The tool uses heuristics for speeding up the neighbour-joining algorithm—while still constructing the same tree as the original neighbour-joining algorithm—making it possible to construct trees for ~8000 species in less...

Fermilab Friends for Science Education | Join Us

Science.gov (United States)

Fermilab Friends for Science Education FFSE Home About Us Join Us Support Us Contact Us Join Us improving science (science, technology, engineering and mathematics) education. Your donation allows us to membership dues allow us to create new, innovative science education programs, making the best use of unique

Syndrome de Silver Russell: à propos de 3 cas et revue de la ...

African Journals Online (AJOL)

Abstract Le syndrome de Silver Russell (SSR) est une maladie génétique rare. Sa prévalence est estimée à 1/100.000. Il s'agit d'une pathologie de l'empreinte parentale, caractérisée par une grande diversité phénotypique. Ses signes cliniques majeurs sont: un retard de croissance intra-utérin sévère, un retard ...

Potentials of Industrie 4.0 and Machine Learning for Mechanical Joining

OpenAIRE

Jäckel, Mathias

2017-01-01

-Sensitivity analysis of the influence of component properties and joining parameters on the joining result for self-pierce riveting -Possibilities to link mechanical joining technologies with the automotive process chain for quality and flexibility improvements -Potential of using machine learning to reduce automotive product development cycles in relation to mechanical joining -Datamining for machine learning at mechanical joining

Seminoma in a Man with Russell-Silver Syndrome Presenting with Testicular Torsion

Directory of Open Access Journals (Sweden)

Satoshi Funada

2016-01-01

Full Text Available Russell-Silver syndrome (RSS is a type of primordial dwarfism. Only one case of testicular cancer in RSS has been reported, the pathology of which was nonseminoma. Here, we report a case of seminoma in a 36-year-old man who was diagnosed with RSS at birth. The seminoma was diagnosed when the patient presented with testicular torsion. This is the first report of testicular seminoma in an RSS patient in the literature. We also discussed the correlation between seminoma and RSS.

75 FR 54381 - Charles M. Russell National Wildlife Refuge and UL Bend National Wildlife Refuge, MT

Science.gov (United States)

2010-09-07

... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R6-R-2010-N078; 60138-1261-6CCP-S3] Charles M. Russell National Wildlife Refuge and UL Bend National Wildlife Refuge, MT AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of availability: Draft comprehensive conservation plan and draft...

New Joining Technology for Optimized Metal/Composite Assemblies

Directory of Open Access Journals (Sweden)

Holger Seidlitz

2014-01-01

Full Text Available The development of a new joining technology, which is used to manufacture high strength hybrid constructions with thermoplastic composites (FRP and metals, is introduced. Similar to natural regulation effects at trees, fibers around the FRP joint become aligned along the lines of force and will not be destroyed by the joining process. This is achieved by the local utilization of the specific plastic flow properties of the FRT and metal component. Compared with usual joining methods—such as flow drill screws, blind and self-piercing rivets—noticeably higher tensile properties can be realized through the novel process management. The load-bearing capability increasing effect could be proved on hybrid joints with hot-dip galvanized steel HX420LAD and orthotropic glass—as well as carbon—fiber reinforced plastics. The results, which were determined in tensile-shear and cross-shear tests according to DIN EN ISO 14273 and DIN EN ISO 14272, are compared with holding loads of established joining techniques with similar joining point diameter and material combinations.

Microwave joining of SiC ceramics and composites

Energy Technology Data Exchange (ETDEWEB)

Ahmad, I.; Silberglitt, R.; Tian, Y.L. [FM Technologies, Inc., Fairfax, VA (United States); Katz, J.D. [Los Alamos National Lab., NM (United States)

1997-04-01

Potential applications of SiC include components for advanced turbine engines, tube assemblies for radiant burners and petrochemical processing and heat exchangers for high efficiency electric power generation systems. Reliable methods for joining SiC are required in order to cost-effectively fabricate components for these applications from commercially available shapes and sizes. This manuscript reports the results of microwave joining experiments performed using two different types of SiC materials. The first were on reaction bonded SiC, and produced joints with fracture toughness equal to or greater than that of the base material over an extended range of joining temperatures. The second were on continuous fiber-reinforced SiC/SiC composite materials, which were successfully joined with a commercial active brazing alloy, as well as by using a polymer precursor.

Wallace Stegner and the Western Environment: Hydraulics, Placelessness, and (Lack of Identity

Directory of Open Access Journals (Sweden)

Fredrik Chr. Brøgger

2011-09-01

Full Text Available This article is chiefly concerned with Wallace Stegner’s ideas of aridity as the key to the understanding of the history and culture of the American West. It first examines the arguments of some major books published in the 1980s that helped strengthen Stegner’s conviction that the West was heading towards environmental disaster due to the rapidly increasing depletion of its rivers and aquifers, a projected ecological crisis that has grown even more acute at the beginning of the 21st century. The subsequent focus of this article, however, is on Stegner’s predominant proposition that the abuse of the arid nature of the West – the rampant disregard of its environmental limitations – is a product of a mindset and a culture that he finds particularly Western. In the course of his analysis, Stegner sees the rootlessness that typified his own family history as a direct reflection of the transientness characteristic of the collective history of the American West, which served to hamper the evolution of a sense of place that in his view is the prerequisite for a genuine stewardship of the land.

Enabling Dissimilar Material Joining Using Friction Stir Scribe Technology

Energy Technology Data Exchange (ETDEWEB)

Hovanski, Yuri; Upadyay, Piyush; Kleinbaum, Sarah; Carlson, Blair; Boettcher, Eric; Ruokolainen, Robert

2017-04-05

One challenge in adapting welding processes to dissimilar material joining is the diversity of melting temperatures of the different materials. Although the use of mechanical fasteners and adhesives have mostly paved the way for near-term implementation of dissimilar material systems, these processes only accentuate the need for low-cost welding processes capable of joining dissimilar material components regardless of alloy, properties, or melting temperature. Friction stir scribe technology was developed to overcome the challenges of joining dissimilar material components where melting temperatures vary greatly, and properties and/or chemistry are not compatible with more traditional welding processes. Although the friction stir scribe process is capable of joining dissimilar metals and metal/polymer systems, a more detailed evaluation of several aluminum/steel joints is presented herein to demonstrate the ability to both chemically and mechanically join dissimilar materials.

75 FR 67095 - Charles M. Russell National Wildlife Refuge and UL Bend National Wildlife Refuge, Montana

Science.gov (United States)

2010-11-01

... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R6-R-2010-N215; 60138-1261-6CCP-S3] Charles M. Russell National Wildlife Refuge and UL Bend National Wildlife Refuge, Montana AGENCY: Fish and Wildlife Service, Interior (DOI). ACTION: Notice; extension of comment period. SUMMARY: We, the U.S. Fish...

Interaction of faults and perturbation of slip: influence of anisotropic stress states in the presence of fault friction and comparison between Wallace-Bott and 3D Distinct Element models.

NARCIS (Netherlands)

Pascal Candas, C.

2002-01-01

Two decades after their birth, the validity of fault slip inversion methods is still strongly debated. These methods are based upon a very simplified mechanical background, the Wallace-Bott hypothesis. Following previous studies, the 3D Distinct Element Method (3DEC software) is used to explore the

On the Complexity of Inner Product Similarity Join

DEFF Research Database (Denmark)

Ahle, Thomas Dybdahl; Pagh, Rasmus; Razenshteyn, Ilya

2016-01-01

A number of tasks in classification, information retrieval, recommendation systems, and record linkage reduce to the core problem of inner product similarity join (IPS join): identifying pairs of vectors in a collection that have a sufficiently large inner product. IPS join is well understood when...... bounds for (A)LSH-based algorithms. In particular, we show that asymmetry can be avoided by relaxing the LSH definition to only consider the collision probability of distinct elements. A new indexing method for IPS based on linear sketches, implying that our hardness results are not far from being tight...

Effects of processing parameters on Be/CuCrZr joining

International Nuclear Information System (INIS)

Park, Jeong-Yong; Lee, Jung-Suk; Choi, Byung-Kwon; Park, Sang-Yun; Hong, Bong Guen; Jeong, Yong Hwan; Jung, Ki-Jung

2007-01-01

A joining of Be/CuCrZr has been considered as the key technology for the fabrication of the ITER first wall. Among the joining methods, Hot isostatic pressing (HIP), which is one of the diffusion bonding methods, is the most feasible method to join the Be and CuCrZr alloy. In the HIP joining of Be and CuCrZr, the interlayer was used to prevent the formation of brittle intermetallic compounds in the interface. Therefore, it is crucial to select a suitable interlayer for a joining of Be and CuCrZr. On the other hand, the diffusion between Be and CuCrZr would be enhanced with an increase of the HIP joining temperature, thereby increasing the joint strength. However, the HIP joining temperature is limited by the mechanical properties of CuCrZr. During the fabrication process of the ITER first wall, CuCrZr is subjected to several thermal cycles including a solution annealing, a cooling and an aging. The HIP joining of Be and CuCrZr corresponds to the aging of CuCrZr. The HIP joining at a higher temperature would cause a degradation of the mechanical properties of CuCrZr by an overaging effect although it is preferable for an improvement of the joint strength. In this study, the effect of the cooling rate on the mechanical properties of aged CuCrZr was investigated to find the maximum HIP temperature without a degradation of the mechanical properties of CuCrZr

W. Ritchie Russell, A.B. Baker, and Fred Plum: Pioneers of ventilatory management in poliomyelitis.

Science.gov (United States)

Wijdicks, Eelco F M

2016-09-13

Historically, neurologists were not involved in the day-to-day management of critically ill patients with bulbar poliomyelitis, but some were. The major contributions of 3 neurologists-W. Ritchie Russell, A.B. Baker, and Fred Plum-in the respiratory management of poliomyelitis have not been recognized. Russell's work was instrumental in identifying multiple types of poliomyelitis defined by their respiratory needs, and he advised treatment that varied from simple postural drainage to use of respirators. He participated in the development of the Radcliffe respiratory pump. Baker recognized the essential involvement of the vagal nerve in respiratory distress, but also observed that involvement of vital centers without cranial nerve involvement would lead to irregular and shallow respiration in some patients and in others with marked dysautonomic features. A similar finding of central involvement of respiration was noted by Plum, who also stressed the importance of hypercapnia. Plum emphasized measurements of vital capacity and techniques to minimize trauma with suctioning after tracheostomy. These 3 neurologists understood the importance of airway and ventilator management, which is currently one of the many pillars of neurocritical care. © 2016 American Academy of Neurology.

Darwin's legacy

Science.gov (United States)

Susskind, Leonard

2009-07-01

Charles Darwin was no theoretical physicist, and I am no biologist. Yet, as a theoretical physicist, I have found much to think about in Darwin's legacy - and in that of his fellow naturalist Alfred Russell Wallace. Darwin's style of science is not usually thought of as theoretical and certainly not mathematical: he was a careful observer of nature, kept copious notes, contributed to zoological collections; and eventually from his vast repertoire of observation deduced the idea of natural selection as the origin of species. The value of theorizing is often dismissed in the biological sciences as less important than observation; and Darwin was the master observer.

Joining of Gamma Titanium Aluminides

National Research Council Canada - National Science Library

Baeslack, William

2002-01-01

.... Although organized and presented by joining process, many of the observations made and relationships developed, particularly those regarding the weldability and welding metallurgy of gamma titanium...

[Early prenatal diagnosis of diprosopic syncephalic joined twins].

Science.gov (United States)

Picaud, A; Nlome-Nze, A R; Engongha-Beka, T; Ogowet-Igumu, N

1990-06-01

The authors summarize the case of diprosopic syncephalic joined twins diagnosed at 22 weeks of pregnancy by ultrasonography performed because of hydramnios. The rate of separation anomalies of monozygotic twins is assessed by a review of the literature: from 1 to twenty to fifty thousands for joined twins to 1 per cent fifty thousand to fifteen millions for diprosopus. The etiology is the result of a late division of the egg between D12 and D16. Often an encephalic diprosopic joined twins cause elevated levels of maternal serum alpha protein. Early ultrasonography permits to consider a vaginal therapeutic abortion.

Joining NbTi superconductors by ultrasonic welding

International Nuclear Information System (INIS)

Hafstrom, J.W.; Killpatrick, D.H.; Niemann, R.C.; Purcell, J.R.; Thresh, H.R.

1976-01-01

An important consideration in the design and construction of large, high-field, superconducting magnets is the capability to fabricate reliable, high-strength, low-resistance joints. A process for joining NbTi, copper stabilized, superconducting composites by ultrasonic welding is described. This process yields a joint strength comparable to that of the superconducting composite and a resistivity significantly lower than achieved by conventional soft soldering. The superconducting properties of the composite are not affected by the joining process. Scarfing the joint to maintain a constant conductor cross section does not degrade its electrical or mechanical properties. The application of the ultrasonic joining process, including process control, scarfing, and NDT procedures, in the construction of the superconducting magnet (U.S. SCMS) for the joint U. S. -- Soviet MHD program is described

Production of high titre antibody response against Russell's viper venom in mice immunized with ethanolic extract of fruits of Piper longum L. (Piperaceae) and piperine.

Science.gov (United States)

Shenoy, P A; Nipate, S S; Sonpetkar, J M; Salvi, N C; Waghmare, A B; Chaudhari, P D

2014-01-15

Piper longum L. fruits have been traditionally used against snakebites in north-eastern and southern region of India. The aim of the study was to assess the production of antibody response against Russell's viper venom in mice after prophylactic immunization with ethanolic extract of fruits of Piper longum L. and piperine. The mice sera were tested for the presence of antibodies against Russell's viper venom by in vitro lethality neutralization assay and in vivo lethality neutralization assay. Polyvalent anti-snake venom serum (antivenom) manufactured by Haffkine Bio-Pharmaceutical Corporation Ltd. was used as standard. Further confirmation of presence of antibodies against the venom in sera of mice immunized with PLE and piperine was done using indirect enzyme-linked immunosorbent assay (ELISA) and double immunodiffusion test. Treatment with PLE-treated mice serum and piperine-treated mice serum was found to inhibit the lethal action of venom both in the in vitro lethality neutralization assay and in vivo lethality neutralization assay. ELISA testing indicated that there were significantly high (pPiper longum and piperine produced a high titre antibody response against Russell's viper venom in mice. The antibodies against PLE and piperine could be useful in antivenom therapy of Russell's viper bites. PLE and piperine may also have a potential interest in view of the development of antivenom formulations used as antidote against snake bites. Copyright © 2013 Elsevier GmbH. All rights reserved.

Comment on 'Intercalibration of solar wind instruments during the International Magnetospheric Study' by S. M. Petrinec and C. T. Russell

Science.gov (United States)

Paularena, K. I.; Lazarus, A. J.

1994-01-01

In their paper Petrinec and Russell (PR) (1993) claim to have developed a 'more homogeneous and accurate set of solar wind data' by 'correcting' the reported ion densities from three plasma instruments: the Los Alamos National Laboratory (LANL) ion electrostatic analyzer on ISEE 3 and the LANL electrostatic analyzer and the Massachusetts Institute of Technology (MIT) Faraday cup plasma instrument on Interplanetary Monitoring Platform 8 (IMP 8). Their data manipulation techniques are examined. The foundations on which their data set are built, are discussed. Reanalysis by MIT on the MIT instrument (IMP 8) was done. Initial results have been issued. The Petrinec & Russell (1993) (PR) paper does not provide accurate density estimates and is an exercise that will only bring confusion to users of the data. The results of PR should be treated with skepticism.

The distribution of henipaviruses in Southeast Asia and Australasia: is Wallace's line a barrier to Nipah virus?

Directory of Open Access Journals (Sweden)

Andrew C Breed

Full Text Available Nipah virus (NiV (Genus Henipavirus is a recently emerged zoonotic virus that causes severe disease in humans and has been found in bats of the genus Pteropus. Whilst NiV has not been detected in Australia, evidence for NiV-infection has been found in pteropid bats in some of Australia's closest neighbours. The aim of this study was to determine the occurrence of henipaviruses in fruit bat (Family Pteropodidae populations to the north of Australia. In particular we tested the hypothesis that Nipah virus is restricted to west of Wallace's Line. Fruit bats from Australia, Papua New Guinea, East Timor and Indonesia were tested for the presence of antibodies to Hendra virus (HeV and Nipah virus, and tested for the presence of HeV, NiV or henipavirus RNA by PCR. Evidence was found for the presence of Nipah virus in both Pteropus vampyrus and Rousettus amplexicaudatus populations from East Timor. Serology and PCR also suggested the presence of a henipavirus that was neither HeV nor NiV in Pteropus alecto and Acerodon celebensis. The results demonstrate the presence of NiV in the fruit bat populations on the eastern side of Wallace's Line and within 500 km of Australia. They indicate the presence of non-NiV, non-HeV henipaviruses in fruit bat populations of Sulawesi and Sumba and possibly in Papua New Guinea. It appears that NiV is present where P. vampyrus occurs, such as in the fruit bat populations of Timor, but where this bat species is absent other henipaviruses may be present, as on Sulawesi and Sumba. Evidence was obtained for the presence henipaviruses in the non-Pteropid species R. amplexicaudatus and in A. celebensis. The findings of this work fill some gaps in knowledge in geographical and species distribution of henipaviruses in Australasia which will contribute to planning of risk management and surveillance activities.

Lessons from Library Power: Enriching Teaching and Learning. Final Report of the Evaluation of the National Library Power Initiative, an Initiative of the DeWitt Wallace-Reader's Digest Fund.

Science.gov (United States)

Zweizig, Douglas L.; Hopkins, Dianne McAfee

This book presents the results of an evaluation of Library Power, an initiative of the DeWitt Wallace-Reader's Digest Fund that provided support for school library development in 19 communities. Following an introductory chapter, the chapters are organized around key questions of the evaluation. Chapters 2 through 4 address the implementation of…

Darwin-Wallace Demons: survival of the fastest in populations of duckweeds and the evolutionary history of an enigmatic group of angiosperms.

Science.gov (United States)

Kutschera, U; Niklas, K J

2015-01-01

In evolutionary biology, the term 'Darwinian fitness' refers to the lifetime reproductive success of an individual within a population of conspecifics. The idea of a 'Darwinian Demon' emerged from this concept and is defined here as an organism that commences reproduction almost immediately after birth, has a maximum fitness, and lives forever. It has been argued that duckweeds (sub-family Lemnoideae, order Alismatales), a group containing five genera and 34 species of small aquatic monocotyledonous plants with a reduced body plan, can be interpreted as examples of 'Darwinian Demons'. Here we focus on the species Spirodela polyrhiza (Great duckweed) and show that these miniaturised aquatic angiosperms display features that fit the definition of the hypothetical organism that we will call a 'Darwin-Wallace Demon' in recognition of the duel proponents of evolution by natural selection. A quantitative analysis (log-log bivariate plot of annual growth in dry biomass versus standing dry body mass of various green algae and land plants) revealed that duckweeds are thus far the most rapidly growing angiosperms in proportion to their body mass. In light of this finding, we discuss the disposable soma and metabolic optimising theories, summarise evidence for and against the proposition that the Lemnoideae (family Araceae) reflect an example of reductive evolution, and argue that, under real-world conditions (environmental constraints and other limitations), 'Darwin-Wallace Demons' cannot exist, although the concept remains useful in much the same way that the Hardy-Weinberg law does. © 2014 German Botanical Society and The Royal Botanical Society of the Netherlands.

Transition piece for joining together tubular pieces

International Nuclear Information System (INIS)

Holko, K.H.

1981-01-01

A transition piece for joining together tubular pieces formed respectively from a low alloy or carbon steel and a high temperature alloy containing at least 16% chromium includes a plurality of tubular parts welded together and formed from materials of selected composition with a maximum chromium content difference of 5% between adjacent parts when the chromium content of each part is below 10% and a maximum chromium difference of 7% between adjacent parts when the chromium content of either part is above 10%. The transition parts are also graded as to such characteristics as thermal expansion coefficient. The transition parts at opposite ends of the transition joint have chromium percentages similar to the tubular pieces to which they are to be joined. The parts may be joined by fusion and/or friction welding and parts may be formed by fusion weld deposition. (author)

Summary of Dissimilar Metal Joining Trials Conducted by Edison Welding Institute

Energy Technology Data Exchange (ETDEWEB)

MJ Lambert

2005-11-18

Under the direction of the NASA-Glenn Research Center, the Edison Welding Institute (EWI) in Columbus, OH performed a series of non-fusion joining experiments to determine the feasibility of joining refractory metals or refractory metal alloys to Ni-based superalloys. Results, as reported by EWI, can be found in the project report for EWI Project 48819GTH (Attachment A, at the end of this document), dated October 10, 2005. The three joining methods used in this investigation were inertia welding, magnetic pulse welding, and electro-spark deposition joining. Five materials were used in these experiments: Mo-47Re, T-111, Hastelloy X, Mar M-247 (coarse-grained, 0.5 mm to several millimeter average grain size), and Mar M-247 (fine-grained, approximately 50 {micro}m average grain size). Several iterative trials of each material combination with each joining method were performed to determine the best practice joining method. Mo-47Re was found to be joined easily to Hastelloy X via inertia welding, but inertia welding of the Mo-alloy to both Mar M-247 alloys resulted in inconsistent joint strength and large reaction layers between the two metals. T-111 was found to join well to Hastelloy X and coarse-grained Mar M-247 via inertia welding, but joining to fine-grained Mar M-247 resulted in low joint strength. Magnetic pulse welding (MPW) was only successful in joining T-111 tubing to Hastelloy X bar stock. The joint integrity and reaction layer between the metals were found to be acceptable. This single joining trial, however, caused damage to the electromagnetic concentrators used in this process. Subsequent design efforts to eliminate the problem resulted in a loss of power imparted to the accelerating work piece, and results could not be reproduced. Welding trials of Mar M-247 to T-111 resulted in catastrophic failure of the bar stock, even at lower power. Electro-spark deposition joining of Mo-47Re, in which the deposited material was Hastelloy X, did not have a

Summary of Dissimilar Metal Joining Trials Conducted by Edison Welding Institute

International Nuclear Information System (INIS)

MJ Lambert

2005-01-01

Under the direction of the NASA-Glenn Research Center, the Edison Welding Institute (EWI) in Columbus, OH performed a series of non-fusion joining experiments to determine the feasibility of joining refractory metals or refractory metal alloys to Ni-based superalloys. Results, as reported by EWI, can be found in the project report for EWI Project 48819GTH (Attachment A, at the end of this document), dated October 10, 2005. The three joining methods used in this investigation were inertia welding, magnetic pulse welding, and electro-spark deposition joining. Five materials were used in these experiments: Mo-47Re, T-111, Hastelloy X, Mar M-247 (coarse-grained, 0.5 mm to several millimeter average grain size), and Mar M-247 (fine-grained, approximately 50 (micro)m average grain size). Several iterative trials of each material combination with each joining method were performed to determine the best practice joining method. Mo-47Re was found to be joined easily to Hastelloy X via inertia welding, but inertia welding of the Mo-alloy to both Mar M-247 alloys resulted in inconsistent joint strength and large reaction layers between the two metals. T-111 was found to join well to Hastelloy X and coarse-grained Mar M-247 via inertia welding, but joining to fine-grained Mar M-247 resulted in low joint strength. Magnetic pulse welding (MPW) was only successful in joining T-111 tubing to Hastelloy X bar stock. The joint integrity and reaction layer between the metals were found to be acceptable. This single joining trial, however, caused damage to the electromagnetic concentrators used in this process. Subsequent design efforts to eliminate the problem resulted in a loss of power imparted to the accelerating work piece, and results could not be reproduced. Welding trials of Mar M-247 to T-111 resulted in catastrophic failure of the bar stock, even at lower power. Electro-spark deposition joining of Mo-47Re, in which the deposited material was Hastelloy X, did not have a

Human radiation studies: Remembering the early years: Oral history of Dr. Patricia Wallace Durbin, Ph.D., conducted November 11, 1994

International Nuclear Information System (INIS)

1995-07-01

This report is a transcript of an interview of Dr. Patricia Wallace Durbin by representatives of the US DOE Office of Human Radiation Research. Dr. Durbin was selected for this interview because of her knowledge of the human plutonium injections and her recollections of key figures, especially Joseph Hamilton. After a brief biographical sketch Dr. Durbin discusses her loss of research funding from DOE, her recollections concerning research into strontium metabolism as part of Project Sunshine, her recollections relating to the rationale for studies of human metabolism of radionuclides, her remembrances of Dr. Hamilton's Astatine and Plutonium research, and her experiences in gathering archival records concerning these researches

Obituary: Russell Makidon (1971-2009)

Science.gov (United States)

Sivaramakrishnan, Anand

2009-12-01

Russell Benjamin Makidon died at the age of 38 in Baltimore on June 22, 2009. Complications following surgery to remove a tumor cut his life tragically short. Russ was a Mission Systems Scientist at the Space Telescope Science Institute (STScI), which he joined straight out of graduate school in 1997. He brought both the force of his intellect and his superb people skills to STScI, where he served the Institute and the broader community with extraordinary effectiveness. Russ was pivotal in helping to develop the wavefront sensing and control system of the James Webb Space Telescope (JWST). He was also a member of the NSF Center for Adaptive Optics at Lick Observatory. Born to Cathy Ann and Peter Makidon, a worker at General Motors, on January 22, 1971, in Bay City, Michigan, Russ was an only child. He was raised by his mother, in Florida, and her parents, in Munger, Michigan. He is survived by his mother, his grandfather Benjamin Franklin Histed, and his father. In addition to his interest in science, Russ was a talented artist and his sketches had appeared in statewide and national competitions. Turning down a scholarship at the Savannah College of Art and Design, he studied physics and astronomy at the University of Michigan, followed by a Masters under Stephen Strom at the University of Massachusetts. He measured pre-main sequence stellar rotation in NGC 2264 and other OB associations, providing insight on the role that circumstellar disks play in setting stellar angular momentum in young stellar clusters and associations. This work, and his extraordinary skills in facilitating scientific exchange, led to his co-investigatorship on the Hubble Space Telescope (HST) Orion Treasury Project. Russ advanced the understanding of high contrast imaging, especially the relation between the properties of a wavefront control or adaptive optics systems and the physics of coronagraphic imaging. He developed a practical understanding of coronagraphy, performing timely and

Development of Joining Technologies for the ITER Blanket First Wall

Energy Technology Data Exchange (ETDEWEB)

Choi, Byoung Kwon; Jung, Yang Il; Park, Dong Jun; Kim, Hyun Gil; Park, Sang Yoon; Park, Jeong Yong; Jeong, Yong Hwan; Lee, Dong Won; Kim, Suk Kwon [KAERI, Daejeon (Korea, Republic of)

2011-01-15

The design of the ITER blanket first wall includes the Beryllium amour tiles joined to CuCrZr heat sink with stainless steel cooling tubes. For the ITER application, the Be/CuCrZr/SS joint was proposed as a first wall material. The joining of Be/CuCrZr as well as CuCrZr/SS was generally carried out by using a hot isostatic pressing (CuC) in many countries. The joining strength for Be/CuCrZr is relatively lower than that for CuCrZr/SS, since we usually forms surface oxides (BeO) and brittle a metallics with Cu. Therefore, the joining technology for the Be/CuCrZr joint has been investigated. Be is apt to adsorb oxygen in an air atmosphere, so we should be etched to eliminate the surface pre-oxide using a chemical solution and Ar ions in a vacuum chamber. Then we is coated with a first was to prevent further oxidation. The kinds of a first we are chosen to be able to enhance the joining strength as inhibiting excessive be diffusion. The performance of the Be/CuCrZr/SS joint used for the ITER first wall is primarily dependent on the joining strength of the Be/CuCrZr interface. The Cr/Cu and Ti/Cr/Cu interlayers enabled the successful joining of be tile to CuCrZr plate. Moreover, ion-beam assisted deposition (IBAD) increased joining strength of the Be/CuCrZr joint mock-ups. IBAD induced the increased packing of depositing atoms, which resulted in denser and more adhesive interlayers. The interlayers formed by IBAD process revealed about 40% improved resistance to the scratch test. It is suggested that the improved adhesion of coating interlayers enabled tight joining of Be and CuCrZr blocks. As compared to without IBAD coating, the shear strength as well as the 4-point bend strength were increased more than 20% depending on interlayer types and coating conditions

Development of Joining Technologies for the ITER Blanket First Wall

International Nuclear Information System (INIS)

Choi, Byoung Kwon; Jung, Yang Il; Park, Dong Jun; Kim, Hyun Gil; Park, Sang Yoon; Park, Jeong Yong; Jeong, Yong Hwan; Lee, Dong Won; Kim, Suk Kwon

2011-01-01

The design of the ITER blanket first wall includes the Beryllium amour tiles joined to CuCrZr heat sink with stainless steel cooling tubes. For the ITER application, the Be/CuCrZr/SS joint was proposed as a first wall material. The joining of Be/CuCrZr as well as CuCrZr/SS was generally carried out by using a hot isostatic pressing (CuC) in many countries. The joining strength for Be/CuCrZr is relatively lower than that for CuCrZr/SS, since we usually forms surface oxides (BeO) and brittle a metallics with Cu. Therefore, the joining technology for the Be/CuCrZr joint has been investigated. Be is apt to adsorb oxygen in an air atmosphere, so we should be etched to eliminate the surface pre-oxide using a chemical solution and Ar ions in a vacuum chamber. Then we is coated with a first was to prevent further oxidation. The kinds of a first we are chosen to be able to enhance the joining strength as inhibiting excessive be diffusion. The performance of the Be/CuCrZr/SS joint used for the ITER first wall is primarily dependent on the joining strength of the Be/CuCrZr interface. The Cr/Cu and Ti/Cr/Cu interlayers enabled the successful joining of be tile to CuCrZr plate. Moreover, ion-beam assisted deposition (IBAD) increased joining strength of the Be/CuCrZr joint mock-ups. IBAD induced the increased packing of depositing atoms, which resulted in denser and more adhesive interlayers. The interlayers formed by IBAD process revealed about 40% improved resistance to the scratch test. It is suggested that the improved adhesion of coating interlayers enabled tight joining of Be and CuCrZr blocks. As compared to without IBAD coating, the shear strength as well as the 4-point bend strength were increased more than 20% depending on interlayer types and coating conditions

Inference of Large Phylogenies Using Neighbour-Joining

DEFF Research Database (Denmark)

Simonsen, Martin; Mailund, Thomas; Pedersen, Christian Nørgaard Storm

2011-01-01

The neighbour-joining method is a widely used method for phylogenetic reconstruction which scales to thousands of taxa. However, advances in sequencing technology have made data sets with more than 10,000 related taxa widely available. Inference of such large phylogenies takes hours or days using...... the Neighbour-Joining method on a normal desktop computer because of the O(n^3) running time. RapidNJ is a search heuristic which reduce the running time of the Neighbour-Joining method significantly but at the cost of an increased memory consumption making inference of large phylogenies infeasible. We present...... two extensions for RapidNJ which reduce the memory requirements and \\makebox{allows} phylogenies with more than 50,000 taxa to be inferred efficiently on a desktop computer. Furthermore, an improved version of the search heuristic is presented which reduces the running time of RapidNJ on many data...

Hypopituitarism following envenoming by Russell's vipers (Daboia siamensis and D. russelii) resembling Sheehan's syndrome: first case report from Sri Lanka, a review of the literature and recommendations for endocrine management.

Science.gov (United States)

Antonypillai, C N; Wass, J A H; Warrell, D A; Rajaratnam, H N

2011-02-01

Russell's vipers (Daboia russelii and D. siamensis) inhabit 10 South and South East Asian countries. People envenomed by these snakes suffer coagulopathy, bleeding, shock, neurotoxicity, acute kidney injury and local tissue damage leading to severe morbidity and mortality. An unusual complication of Russell's viper bite envenoming in Burma (D. siamensis) and southern India (D. russelii) is hypopituitarism but until now it has not been reported elsewhere. Here, we describe the first case of hypopituitarism following Russell's viper bite in Sri Lanka, review the literature on this subject and make recommendations for endocrine investigation and management. A 49-year-old man was bitten and seriously envenomed by D. russelii in 2005. He was treated with antivenom but although he recovered from the acute effects he remained feeling unwell. Hypopituitarism, with deficiencies of gonadal, steroid and thyroid axes, was diagnosed 3 years later. He showed marked improvement after replacement of anterior pituitary hormones. We attribute his hypopituitarism to D. russelii envenoming. Russell's viper bite is known to cause acute and chronic hypopituitarism and diabetes insipidus, perhaps through deposition of fibrin microthrombi and haemorrhage in the pituitary gland resulting from the action of venom procoagulant enzymes and haemorrhagins. Forty nine cases of hypopituitarism following Russell's viper bite have been described in the English language literature. Patients with acute hypopituitarism may present with hypoglycaemia and hypotension during the acute phase of envenoming. Those with chronic hypopituitarism seem to have recovered from envenoming but present later with features of hypopituitarism. Over 85% of these patients had suffered acute kidney injury immediately after the bite. Steroid replacement in acute hypopituitarism is life saving. All 11 patients with chronic hypopituitarism in whom the outcome of treatment was reported, showed marked improvement with hormone

Mass loss rates in the Hertzsprung-Russell diagram

International Nuclear Information System (INIS)

Jager, C. de; Nieuwenhuijzen, H.; Hucht, K.A. van der

1988-01-01

From the literature we collected values for the rate of mass loss for 271 stars, nearly all of population I, and of spectral types 0 through M. Rates of stellar mass loss determined according to six different methods were compared and appear to yield the same result per star within the limits of errors; this is true regardless of the star's position in the HR-diagram. Thus average rates of mass loss were determined, and weights were allocated to the M-determinations for each star. In addition we studied some groups of other stars: fast rotators (22 Be-type stars), and chemically evolved stars (31 Wolf-Rayet stars; 11 C- and 4 S-type stars and 15 nuclei of planetary nebulae). The chemically evolved stars have rates of mass loss which are larger than those of ''normal'' stars occupying the same positions in the Hertzprung-Russel diagram, by factors: 160 for Wolf-Rayet stars; 11 for C-type stars, and by estimated factors of 10 3 to 10 4 for the nuclei of planetary nebulae

Joining of thin thickness SiCf/SiC composites: research of a joining composition and of an associated elaboration process

International Nuclear Information System (INIS)

Jacques, E.

2012-01-01

The present work is part of the Fourth Generation Fast Reactors program. One of the key issues is the joining of the SiC f /SiC ceramic matrix composites (CMC) to seal the combustible cladding. At the present time, no chemical composition as a joint is refractive enough to face the expected operating temperatures. The aims of this study are the following: (1) the identification of a joining composition and its associated elaboration process answering the specifications, (2) the validation of a local and fast heating process and (3) the definition of mechanical tests to characterise these joinings. We describe the methodology and the results for joining SiC and SiC f /SiC substrates at solid and liquid state using metallic silicides. Joint integrity and joint strength can be improved by adding small SiC particles to the silicides powders. Chemical reactivity, wettability tests and thermomechanical properties analysis have been carried out on the joints. Cross sections of the assembly were prepared to study the joint/substrate chemical bonding, the cracking and the crack deflection in the vicinity of the interface. Also, one of the challenge consists in using a local heating at a high temperature (around 1800 C) for a short time to avoid the degradation of the composite structure. The assemblies have been then performed in an inductive furnace but in order to prepare the joining technology, trials of local heating have also been investigated with a CO 2 laser beam and a microwave generator. Finally, descriptions of the 4-points bending mechanical test used and the associated results are presented. (author) [fr

Microstructure and properties of ceramics and composites joined by plastic deformation.

Energy Technology Data Exchange (ETDEWEB)

Goretta, K. C.; Singh, D.; Chen, N.; Gutierrez-Mora, F.; Lorenzo-Martin, M. de la, Cinta; Dominguez-Rodriguez, A.; Routbort, J. L.; Energy Systems; Univ. of Seville

2008-12-01

A review is presented of the design of suitable materials systems for joining by high-temperature plastic deformation, details of the joining techniques, microstructures and properties of the resulting composite bodies, and prospects and limitation for this type of joining technology. Joining parameters and resulting forms are discussed for Al{sub 2}O{sub 3}/mullite particulate composites, Y{sub 2}O{sub 3}-stabilized ZrO{sub 2} particulate/Al{sub 2}O{sub 3} particulate and whisker-reinforced composites, hydroxyapatite bioceramics, La{sub 0.85}Sr{sub 0.15}MnO{sub 3} electronic ceramics, MgF{sub 2} optical ceramics, and Ni{sub 3}Al intermetallics. Results are contrasted with those obtained by other methods of joining brittle, high-temperature materials, with special focus on durability and mechanical properties.

Microstructure and properties of ceramics and composites joined by plastic deformation

Energy Technology Data Exchange (ETDEWEB)

Goretta, K.C. [Argonne National Laboratory, Argonne, IL 60439-4838 (United States)], E-mail: ken.goretta@aoard.af.mil; Singh, D.; Chen Nan [Argonne National Laboratory, Argonne, IL 60439-4838 (United States); Gutierrez-Mora, F.; Cinta Lorenzo-Martin, M. de la [Argonne National Laboratory, Argonne, IL 60439-4838 (United States); University of Seville, Seville 41080 (Spain); Dominguez-Rodriguez, A. [University of Seville, Seville 41080 (Spain); Routbort, J.L. [Argonne National Laboratory, Argonne, IL 60439-4838 (United States)

2008-12-20

A review is presented of the design of suitable materials systems for joining by high-temperature plastic deformation, details of the joining techniques, microstructures and properties of the resulting composite bodies, and prospects and limitation for this type of joining technology. Joining parameters and resulting forms are discussed for Al{sub 2}O{sub 3}/mullite particulate composites, Y{sub 2}O{sub 3}-stabilized ZrO{sub 2} particulate/Al{sub 2}O{sub 3} particulate and whisker-reinforced composites, hydroxyapatite bioceramics, La{sub 0.85}Sr{sub 0.15}MnO{sub 3} electronic ceramics, MgF{sub 2} optical ceramics, and Ni{sub 3}Al intermetallics. Results are contrasted with those obtained by other methods of joining brittle, high-temperature materials, with special focus on durability and mechanical properties.

The neurological legacy of John Russell Reynolds (1828-1896).

Science.gov (United States)

Eadie, M J

2007-04-01

Sir John Russell Reynolds was an eminent and highly influential physician in the Victorian era who held the Presidencies of the Royal College of Physicians of London, and of the British Medical Association. He was the protégée of the great experimental physiologist, Marshall Hall, who discovered the reflex arc, and succeeded to Hall's clinical practice in London. Reynolds' thought and clinical activities linked the emerging British neurology of the first half of the 19th century with its blossoming, particularly in London, from 1860 onwards. In his writings Reynolds was the first English author to apply the approach to classification of neurological disorders that is still often used, though now in modified form. He was also the first to enunciate the notion of positive and negative symptoms arising from neurological disease and to suggest their pathogenesis, and was arguably the originator of the influential concept that an idiopathic disease, epilepsy, existed, one to be distinguished from 'epileptiform' seizures due to brain pathology.

Joining of Aluminium Alloy Sheets by Rectangular Mechanical Clinching

International Nuclear Information System (INIS)

Abe, Y.; Mori, K.; Kato, T.

2011-01-01

A mechanical clinching has the advantage of low running costs. However, the joint strength is not high. To improve the maximum load of the joined sheets by a mechanical clinching, square and rectangular mechanical clinching were introduced. In the mechanical clinching, the two sheets are mechanically joined by forming an interlock between the lower and upper sheets by the punch and die. The joined length with the interlock was increased by the rectangular punch and die. The deforming behaviours of the sheets in the mechanical clinching were investigated, and then the interlock in the sheets had distribution in the circumference of the projection. Although the interlocks were formed in both projection side and diagonal, the interlock in the diagonal was smaller because of the long contact length between the lower sheet and the die cavity surface. The maximum load of the joined sheets by the rectangular mechanical clinching was two times larger than the load by the round mechanical clinching.

Fast and scalable inequality joins

KAUST Repository

Khayyat, Zuhair; Lucia, William; Singh, Meghna; Ouzzani, Mourad; Papotti, Paolo; Quiané -Ruiz, Jorge Arnulfo; Tang, Nan; Kalnis, Panos

2016-01-01

an incremental inequality join algorithm to handle scenarios where data keeps changing. We have implemented a centralized version of these algorithms on top of PostgreSQL, a distributed version on top of Spark SQL, and an existing data cleaning system, Nadeef

49 CFR 192.283 - Plastic pipe: Qualifying joining procedures.

Science.gov (United States)

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Plastic pipe: Qualifying joining procedures. 192... Materials Other Than by Welding § 192.283 Plastic pipe: Qualifying joining procedures. (a) Heat fusion... for making plastic pipe joints by a heat fusion, solvent cement, or adhesive method, the procedure...

Deletions and rearrangements of the H19/IGF2 enhancer region in patients with Silver-Russell syndrome and growth retardation

DEFF Research Database (Denmark)

Grønskov, Karen; Poole, Rebecca L; Hahnemann, Johanne M D

2011-01-01

Silver-Russell syndrome (SRS) is characterised by prenatal and postnatal growth retardation, dysmorphic facial features, and body asymmetry. In 35-60% of SRS cases the paternally methylated imprinting control region (ICR) upstream of the H19 gene (H19-ICR) is hypomethylated, leading to downregula...

Superplasticity and joining of zirconia-based ceramics

International Nuclear Information System (INIS)

Dominguez-Rodriguez, A.; Gutierrez-Mora, F.; Jimenez-Melendo, M.; Chaim, R.; Routbort, J. L.

1999-01-01

Steady-state creep and joining of alumina/zirconia composites containing alumina volume fractions of 20, 60, and 85% have been investigated between 1,250 and 1,350 C. Superplasticity of these compounds is controlled by grain-boundary sliding and the creep rate is a function of alumina volume fraction, not grain size. Using the principles of superplasticity, pieces of the composite have been joined by applying the stress required to achieve 5 to 10% strain to form a strong interface at temperatures as low as 1,200 C

Superplasticity and joining of zirconia-based ceramics

International Nuclear Information System (INIS)

Gutierrez-Mora, F.; Dominguez-Rodriguez, A.; Jimenez-Melendo, M.; Chaim, R.; Ravi, G.B.; Routbort, J.L.

2000-01-01

Steady-state creep and joining of alumina/zirconia composites containing alumina volume fractions of 20, 60 and 85% have been investigated between 1,250 and 1,350 C. Superplasticity of these compounds is controlled by grain-boundary sliding and the creep rate is a function of alumina volume fraction, not grain size. Using the principles of superplasticity, pieces of the composite have been joined by applying the stress required to achieve 5 to 10% strain to form a strong interface at temperatures as low as 1,200 C

Development of a procedure for forming assisted thermal joining of tubes

Science.gov (United States)

Chen, Hui; Löbbe, Christian; Staupendahl, Daniel; Tekkaya, A. Erman

2018-05-01

With the demand of lightweight design in the automotive industry, not only the wall-thicknesses of tubular components of the chassis or spaceframe are continuously decreased. Also the thicknesses of exhaust system parts are reduced to save material and mass. However, thinner tubular parts bring about additional challenges in joining. Welding or brazing methods, which are utilized in joining tubes with specific requirements concerning leak tightness, are sensitive to the gap between the joining partners. Furthermore, a large joining area is required to ensure the durability of the joint. The introduction of a forming step in the assembled state prior to thermal joining can define and control the gap for subsequent brazing or welding. The mechanical pre-joint resulting from the previously described calibration step also results in easier handling of the tubes prior to thermal joining. In the presented investigation, a spinning process is utilized to produce force-fit joints of varying lengths and diameter reduction and form-fit joints with varying geometrical attributes. The spinning process facilitates a high formability and geometrical flexibility, while at the achievable precision is high and the process forces are low. The strength of the joints is used to evaluate the joint quality. Finally, a comparison between joints produced by forming with subsequent brazing and original tube is conducted, which presents the high performance of the developed procedure for forming assisted thermal joining.

Model Checking Processes Specified In Join-Calculus Algebra

Directory of Open Access Journals (Sweden)

Sławomir Piotr Maludziński

2014-01-01

Full Text Available This article presents a model checking tool used to verify concurrent systems specified in join-calculus algebra. The temporal properties of systems under verification are expressed in CTL logic. Join-calculus algebra with its operational semantics defined by the chemical abstract machine serves as the basic method for the specification of concurrent systems and their synchronization mechanisms, and allows the examination of more complex systems.

Glass-Metal Joining in Nuclear Environment: the State of the Art

International Nuclear Information System (INIS)

Jacobs, M.

2007-01-01

Full text of publication follows: In the ITER fusion machine and in material testing fission reactors, it is not possible to avoid the use of non-metallic materials like glass for example. There is therefore a need to apply metal to glass joints. This problem arose already at the beginning of the 19. century when the electric light bulb was invented. Nowadays this type of glass-metal joint is very successful and widely used in the electronic industry. In the case of ITER and material testing reactors, glass-metal joints are necessary for the fixation of the optical windows and optical fibres to a metal structure to perform diagnostics. These types of joints are still difficult to make and their behaviour is not fully understood. A joint between glass and metal for a nuclear or fusion application has indeed to resist high temperatures and high neutron fluences, while keeping a good mechanical strength and remaining leak tight. These characteristics are difficult to obtain under these severe conditions. This paper presents an overview of the different joining technologies that can be used to join glass to metal in a severe nuclear environment. The working mechanism of the technologies are explained, together with their respective advantages and drawbacks. Three different types of joining are discussed: fastening, liquid phase joining and solid phase joining. Fastening is a mechanical attachment technique, not achieving easily hermetic seals. Liquid and solid phase joining on the other hand form a real bond, what makes the joint much stronger. The most important technologies using liquid phase joining are adhesive bonding, fusion welding and brazing. In the case of the solid phase joining the choices are ultrasonic torsion welding, diffusion bonding and electrostatic bonding. If it is usually not possible to join the glass directly to the metal, an interlayer must be used. One speaks then of indirect joining. The paper will conclude with a discussion on the best

Taiwan university joins search for antimatter

CERN Multimedia

Chiu, Y

2002-01-01

National Cheng Kung University announced yesterday that it will be joining the Alpha Magnetic Spectrometer, an international scientific research project aimed at looking for antimatter in space (1 page).

High-energy electron beams for ceramic joining

Science.gov (United States)

Turman, Bob N.; Glass, S. J.; Halbleib, J. A.; Helmich, D. R.; Loehman, Ron E.; Clifford, Jerome R.

1995-03-01

Joining of structural ceramics is possible using high melting point metals such as Mo and Pt that are heated with a high energy electron beam, with the potential for high temperature joining. A 10 MeV electron beam can penetrate through 1 cm of ceramic, offering the possibility of buried interface joining. Because of transient heating and the lower heat capacity of the metal relative to the ceramic, a pulsed high power beam has the potential for melting the metal without decomposing or melting the ceramic. We have demonstrated the feasibility of the process with a series of 10 MeV, 1 kW electron beam experiments. Shear strengths up to 28 MPa have been measured. This strength is comparable to that reported in the literature for bonding silicon nitride (Si3N4) to molybdenum with copper-silver-titanium braze, but weaker than that reported for Si3N4 - Si3N4 with gold-nickel braze. The bonding mechanism appears to be formation of a thin silicide layer. Beam damage to the Si3N4 was also assessed.

Top scientists join Stephen Hawking at Perimeter Institute

Science.gov (United States)

Banks, Michael

2009-03-01

Nine leading researchers are to join Stephen Hawking as visiting fellows at the Perimeter Institute for Theoretical Physics in Ontario, Canada. The researchers, who include string theorists Leonard Susskind from Stanford University and Asoka Sen from the Harisch-Chandra Research Institute in India, will each spend a few months of the year at the institute as "distinguished research chairs". They will be joined by another 30 scientists to be announced at a later date.

ROMANIA'S MACROECONOMIC ACHIEVEMENTS FOR JOINING THE UNIQUE EUROPEAN CURENCY

Directory of Open Access Journals (Sweden)

SILVIA POPESCU

2011-04-01

Full Text Available The Romanian government has announced plans to join the eurozone by 2015. Currently, the leu is not yet part of ERM II but plans to join in 2010-2012. The economic advantages of the monetary union grow with expansion of the Euro zone. There is also a high level of skepticism; the main fear about the Euro is the inflation –that is considerable promoted by the Euro currency’s exchange rate in comparison with 2002; another restraint is due to member states inability to establish their own interest rates. The IMF arose the option of joining the Euro zone criteria relaxing. A one-sided Euro’s joining was suggested by International Monetary Fund on March-April 2009, in a confidential report mentioned by The Financial Times as the emergent states in Central and Eastern Europe to be able to pass to the unique currency, but not being represented in the Central European Bank Board. By its side, CEB considers that emergent states of the European Union must not pass to the unique currency unilaterally, because such a fact could under-mine the trust in Euro currency worldwide. This option would hardly deepen the macroeconomic controversies inside the Euro zone and would contradict the previous conditions already imposed. An acceptable solution could be the fastening of emergent countries joining the Exchange Rate Mechanism 2, after they are aware of risks arisen by such a step. The European Commission endorses in the Convergence Report on 2010 that Romania doesn’t meet any criteria needed by passing to the unique European currency, respectively: prices stability; budget position of the government; stability of exchange rate; interest convergence on long run and there are also law impediments. Our paper discusses arguments for a faster passing to the Euro currency versus arguments for a late joining the Euro currency in Romania.

Sense data and the philosophy of mind: Russell, James, and Mach

Directory of Open Access Journals (Sweden)

Gary Hatfield

2002-12-01

Full Text Available The theory of knowledge in early twentieth-century Anglo American philosophy was oriented toward phenomenally described cognition There was a healthy respect for the mind body problem, which meant that phenomena in both the mental and physical domain were taken sinuously Bertrand Russell's developing position on sense-data and momentary particulars drew upon, and ultimately became like, the neutral monism of Ernst Mach and William James Due to a more recent behaviorist and physicalist inspired "fear of the mental", this development has been down played in historical work on early analytic philosophy Such neglect as sumes that the "linguistic turn" is a proper and permanent effect of twentieth century philosophy, an assumption that distorts early analytic historiography, and begs a substantive philosophical question about thought and cognition.

Microwave joining of SiC

Energy Technology Data Exchange (ETDEWEB)

Silberglitt, R.; Ahmad, I. [FM Technologies, Inc., Fairfax, VA (United States); Black, W.M. [George Mason Univ., Fairfax, VA (United States)] [and others

1995-05-01

The purpose of this work is to optimize the properties of SiC-SiC joints made using microwave energy. The current focus is on optimization of time-temperature profiles, production of SiC from chemical precursors, and design of new applicators for joining of long tubes.

Joining of SiCf/SiC composites for thermonuclear fusion reactors

International Nuclear Information System (INIS)

Ferraris, M.; Badini, C.; Montorsi, M.; Appendino, P.; Scholz, H.W.

1994-01-01

Due to their favourable radiological behaviour, SiC f /SiC composites are promising structural materials for future use in fusion reactors. A problem to cope with is the joining of the ceramic composite material (CMC) to itself for more complex structures. Maintenance concepts for a reactor made of SiC f /SiC will demand a method of joining. The joining agents should comply with the low-activation approach of the base material. With the acceptable elements Si and Mg, sandwich structures of composite/metal/composite were prepared in Ar atmosphere at temperatures just above the melting points of the metals. Another promising route is the use of joining agents of boro-silicate glasses: their composition can be tailored to obtain softening temperatures of interest for fusion applications. The glassy joint can be easily ceramised to improve thermomechanical properties. The joining interfaces were investigated by SEM-EDS, XRD and mechanical tests. ((orig.))

SINDROME DE SILVER-RUSSELL, REPORTE DE UN CASO

Directory of Open Access Journals (Sweden)

Ángela Liliana Grandas Ramírez

2012-07-01

Full Text Available El síndrome Silver-Russell es un desorden genético (hipometilación en la región centro 1 (ICR1 del  IGF2 /H19  locus 11p15 y clínicamente heterogéneo, caracterizado por retardo del crecimiento intrauterino, baja talla y peso, y perímetro cefálico normal. Su tratamiento se basa en la  hormona del crecimiento. Se presenta el caso de una niña de 5 años que ingresa al servicio de Estomatología Pediátrica de la Fundación HOMI Hospital de la Misericordia de Bogotá, con antecedente de retardo del crecimiento intrauterino, manejada con dieta rica en carbohidratos y uso de biberón hasta los 2 y medio años, Al examen talla 88 cm y peso 9 Kg,  cara forma triangular, frente prominente, micrognatismo mandibular, apiñamiento dental y caries de la infancia temprana. Se diagnostica con retardo de la edad ósea, dental y morfológica. El tratamiento programa individual riesgo de caries y proveer una alta calidad de salud oral.

SINDROME DE SILVER-RUSSELL, REPORTE DE UN CASO

Directory of Open Access Journals (Sweden)

Ángela Liliana Grandas Ramírez

2012-12-01

Full Text Available El síndrome Silver-Russell es un desorden genético (hipometilación en la región centro 1 (ICR1 del  IGF2 /H19  locus 11p15 y clínicamente heterogéneo, caracterizado por retardo del crecimiento intrauterino, baja talla y peso, y perímetro cefálico normal. Su tratamiento se basa en la  hormona del crecimiento. Se presenta el caso de una niña de 5 años que ingresa al servicio de Estomatología Pediátrica de la Fundación HOMI Hospital de la Misericordia de Bogotá, con antecedente de retardo del crecimiento intrauterino, manejada con dieta rica en carbohidratos y uso de biberón hasta los 2 y medio años, Al examen talla 88 cm y peso 9 Kg,  cara forma triangular, frente prominente, micrognatismo mandibular, apiñamiento dental y caries de la infancia temprana. Se diagnostica con retardo de la edad ósea, dental y morfológica. El tratamiento programa individual riesgo de caries y proveer una alta calidad de salud oral.

Why join the Staff Association

CERN Multimedia

Association du personnel

2011-01-01

Becoming a member of the Staff Association (SA) is above all a personal choice, showing that the joining person’s commitment and adherence to values such as solidarity, social cohesion, etc.In September, the SA launches a membership campaign to convince a maximum number to join, to inform, arouse interest and support. Posters, emails and individual contacts are part of the campaign programme, just like this editorial. As far as individual contacts are concerned, we ask you to give time and lend an ear to the delegates of your department in the Staff Council, who will approach you, in order to make an open and constructive discussion possible. Do not hesitate to ask questions and let them know your thoughts about the SA, as (constructive) criticism enables us to progress. The Staff Association and its role of collective representation The Staff Association, via its delegates, represents collectively all staff of the Organization before the Director-General and Member States. To do this, staff rep...

Flexible Friction Stir Joining Technology

Energy Technology Data Exchange (ETDEWEB)

Feng, Zhili [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lim, Yong Chae [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Mahoney, Murray [MegaStir Technologies LLC, Orem, UT (United States); Sanderson, Samuel [MegaStir Technologies LLC, Orem, UT (United States); Larsen, Steve [MegaStir Technologies LLC, Orem, UT (United States); Steel, Russel [MegaStir Technologies LLC, Orem, UT (United States); Fleck, Dale [MegaStir Technologies LLC, Orem, UT (United States); Fairchild, Doug P [ExxonMobil, Upstream Research Company (URC), Houston, TX (United States); Wasson, Andrew J [ExxonMobil, Upstream Research Company (URC), Houston, TX (United States); Babb, Jon [MegaStir Technologies LLC, Orem, UT (United States); Higgins, Paul [MegaStir Technologies LLC, Orem, UT (United States)

2015-07-23

Reported herein is the final report on a U.S. Department of Energy (DOE) Advanced Manufacturing Office (AMO) project with industry cost-share that was jointly carried out by Oak Ridge National Laboratory (ORNL), ExxonMobil Upstream Research Company (ExxonMobil), and MegaStir Technologies (MegaStir). The project was aimed to advance the state of the art of friction stir welding (FSW) technology, a highly energy-efficient solid-state joining process, for field deployable, on-site fabrications of large, complex and thick-sectioned structures of high-performance and high-temperature materials. The technology innovations developed herein attempted to address two fundamental shortcomings of FSW: 1) the inability for on-site welding and 2) the inability to weld thick section steels, both of which have impeded widespread use of FSW in manufacturing. Through this work, major advance has been made toward transforming FSW technology from a “specialty” process to a mainstream materials joining technology to realize its pervasive energy, environmental, and economic benefits across industry.

Development of reconstitution method for surveillance specimens using surface activated joining

Energy Technology Data Exchange (ETDEWEB)

Nakamura, Terumi; Kaihara, Shoichiro; Yoshida, Kazuo; Sato, Akira [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan); Onizawa, Kunio; Nishiyama, Yutaka; Fukaya, Kiyoshi; Suzuki, Masahide

1996-03-01

Evaluation of embrittlement of reactor vessel steel due to irradiation requires surveillance tests. However, many surveillance specimens are necessary for nuclear plants life extension. Therefore, a specimen reconstitution technique has become important to provide the many specimens for continued surveillance. A surface activated joining (SAJ) method has been developed to join various materials together at low temperatures with little deformation, and is useful to bond irradiated specimens. To assess the validity of this method, Charpy impact tests were carried out, and the characteristics caused by heating during joining were measured. The test results showed the Charpy impact values were almost the same as base materials, and surface activated joining reduced heat affected zone to less than 2 mm. (author).

Comparative analysis of the practice of China and Russia joining the WTO

Directory of Open Access Journals (Sweden)

Anastasia Sergeyevna Loginova

2015-09-01

Full Text Available Objective to examine the positive and negative experience of China39s joining the World Trade Organization WTO that joined it on terms similar to the Russian ones for the best understanding of the advantages and disadvantages of joining and building the appropriate policy. Methods the objective of the work has been achieved through the application of both general and specific scientific methods. In particular the analysis and synthesis allowed to study the social and economic context of the state in the framework of joining the WTO the consequences of such membership and to identify the key areas for improvement of this step for Russia. Statistical techniques were used in the process of gathering information about the key economic indicators. The fundamental method was comparativelegal which made it possible to draw parallels in joining the WTO by various states. Results basing on the measures taken by China both before and after joining the WTO as well as evaluation of their implication the conclusion was made about its successful experience. The actions before joining were very effective. In particular they are applicable to the fields of agriculture automotive industry investment policy etc. The measures of nonaddress subsidizing maintaining the socioeconomic stability in the country the export orientation of the economy along with functioning of special economic zones with joint ventures are in the authors39 opinion constructive actions for Russiarsquos adaptation to the WTO. Scientific novelty for the first time the thesis is put forward about the similarity of the Russia and China conditions when joining the WTO. The analysis is made of the complex measures preceding and following the joining. The necessity is grounded of reflecting the China39s positive and negative experiences in the Russian policy. Practical significance the main provisions and conclusions can be used in the research activity in addressing the issues of Russiarsquos

Joining of aluminum sheet and glass fiber reinforced polymer using extruded pins

Science.gov (United States)

Conte, Romina; Buhl, Johannes; Ambrogio, Giuseppina; Bambach, Markus

2018-05-01

The present contribution proposes a new approach for joining sheet metal and fiber reinforced composites. The joining process draws upon a Friction Stir Forming (FSF) process, which is performed on the metal sheet to produce slender pins. These pins are used to pierce through the composite. Joining is complete by forming a locking head out of the part if the pin sticks out of the composite. Pins of different diameters and lengths were produced from EN AW-1050 material, which were joined to glass fiber reinforced polyamide-6. The strength of the joint has been experimentally tested in order to understand the effect of the process temperature on the pins strength and therefore on the joining. The results demonstrate the feasibility of this new technique, which uses no excess material.

Joining of parts via magnetic heating of metal aluminum powders

Science.gov (United States)

Baker, Ian

2013-05-21

A method of joining at least two parts includes steps of dispersing a joining material comprising a multi-phase magnetic metal-aluminum powder at an interface between the at least two parts to be joined and applying an alternating magnetic field (AMF). The AMF has a magnetic field strength and frequency suitable for inducing magnetic hysteresis losses in the metal-aluminum powder and is applied for a period that raises temperature of the metal-aluminum powder to an exothermic transformation temperature. At the exothermic transformation temperature, the metal-aluminum powder melts and resolidifies as a metal aluminide solid having a non-magnetic configuration.

The Solar Eclipse Mural Series by Howard Russell Butler

Science.gov (United States)

Pasachoff, J. M.; Olson, R. J. M.

2016-01-01

There is a rich trove of astronomical phenomena in works of art by artists from the greater New York area, a trend that is even more pronounced in the oeuvres of New York City residents through the present day. A case in point is the trio of oil paintings by artist (and former physics professor) Howard Russell Butler depicting total solar eclipses in 1918, 1923, and 1925 that are based on his own observations. They were long displayed in the former art-deco building of the Hayden Planetarium of the American Museum of Natural History, the location of this conference. (The Museum also has nine other Butler paintings, none of which are currently exhibited.) Since the eclipse paintings have been in storage for many years, these once famous works are now virtually forgotten. Based on our research as an astronomer who has seen sixty-two solar eclipses and an art historian who has written extensively about astronomical imagery, we will discuss Butler's Solar Eclipse Triptych to explore its place in the history of astronomical imaging.

Recent progress in micro and nano-joining

Energy Technology Data Exchange (ETDEWEB)

Zhou, Y; Hu, A; Khan, M I; Wu, W; Tam, B; Yavuz, M [Centre for Advanced Materials Joining Department of Mechanical and Mechatronics Engineering, University of Waterloo 200 University Avenue West, Waterloo, N2L 3G1 (Canada)], E-mail: nzhou@uwaterloo.ca

2009-05-01

Micro and nano-joining has been identified as a key enabling technology in the construction of micromechanical and microelectronic devices. The current article reviews recent progress in micro and nano-joining. In particular, laser micro-welding (LMW) of crossed 316 LVM stainless steel (SS) wire was compared to conventional resistance micro-welding (RMW) and was successfully employed in welding a Pt-Ir /SS dissimilar combination. Welding of Au nanoparticles was realized using femtosecond laser irradiation and its application in the surface enhanced Raman spectroscopy was investigated. Brazing between carbon nanotube (CNT) bundles and Ni electrodes was attained in vacuum, resulting in the development of a novel CNT filament of incandescent lamps.

“I Kept Saying Her Name”: Naming, Labels and Power in the Early Writing of David Foster Wallace

Directory of Open Access Journals (Sweden)

Clare Hayes-Brady

2017-03-01

Full Text Available Among the most immediately striking features of David Foster Wallace’s writing is his use of names. Ranging from broad comedy to philosophical and cryptic signposting, the ways Wallace names his characters, and, just as significantly, the ways his characters name themselves and each other, are central to the development of identity, and to the appropriation and exercise of power. The forms and relationships of nomination in Wallace’s fiction speak to a range of his primary artistic concerns, and a reading of these interactions sheds light on both the intricate narrative structures and the grounding ideologies of his writing. This essay traces some of the patterns in these nominative practices, arguing that an onomastic reading of Wallace’s work traces the sometimes less than clear connection between the broad comic style that marks his early work in particular and the profound philosophical engagement undertaken throughout his career.

Performance of electro-plated and joined components for divertor application

International Nuclear Information System (INIS)

Krauss, Wolfgang; Lorenz, Julia; Konys, Jürgen

2013-01-01

Highlights: • Active interlayers of Ni and Pd were electroplated on W to assist joining. • Demonstrator types of W-steel and W–W joints were successfully fabricated. • Diffusion processes increase operation temperature above brazing temperature. • Ni electro-plating is less sensitive to variation of deposition parameters than Pd. • Shear tests showed values in resistance comparable to those of commercial fillers. -- Abstract: A general challenge in divertor development, independently of design type and cooling medium water or helium, is the reliable and adapted joining of components. Depending on the design variants, the characteristics of the joints will be focused on functional or structural behavior to guarantee e.g. good thermal conductivity and sufficient mechanical strength. All variants will have in common that tungsten is the plasma facing material. Thus, material combinations to be joined will range from Cu base over steel to tungsten. Especially tungsten shows lacks in adapted joining due to its metallurgical behavior ranging from immiscibility over bad wetting up to brittle intermetallic phase formation. Joining assisted by electro-chemical deposition of functional and filler layers showed that encouraging progress was achieved in wetting applying nickel interlayers. Nickel proved to be a good reference material but alternative elements (e.g. Pd, Fe) may be more attractive in fusion to manufacture suitable joints. Replacing of Ni as activator element by Pd for W/W or W/steel joints was achieved and joining with Cu-filler was successfully performed. Manufactured joints were characterized applying metallurgical testing and SEM/EDX analyses demonstrating the applicability of Pd activator. First shear tests showed that the joints exhibit mechanical stability sufficient for technical application

Cohesive delamination and frictional contact on joining surface via XFEM

Directory of Open Access Journals (Sweden)

Francesco Parrinello

2018-02-01

Full Text Available In the present paper, the complex mechanical behaviour of the surfaces joining two differentbodies is analysed by a cohesive-frictional interface constitutive model. The kinematical behaviouris characterized by the presence of discontinuous displacement fields, that take place at the internalconnecting surfaces, both in the fully cohesive phase and in the delamination one. Generally, in order tocatch discontinuous displacement fields, internal connecting surfaces (adhesive layers are modelled bymeans of interface elements, which connect, node by node, the meshes of the joined bodies, requiringthe mesh to be conforming to the geometry of the single bodies and to the relevant connecting surface.In the present paper, the Extended Finite Element Method (XFEM is employed to model, both fromthe geometrical and from the kinematical point of view, the whole domain, including the connectedbodies and the joining surface. The joining surface is not discretized by specific finite elements, butit is defined as an internal discontinuity surface, whose spatial position inside the mesh is analyticallydefined. The proposed approach is developed for two-dimensional composite domains, formed by twoor more material portions joined together by means of a zero thickness adhesive layer. The numericalresults obtained with the proposed approach are compared with the results of the classical interfacefinite element approach. Some examples of delamination and frictional contact are proposed withlinear, circular and curvilinear adhesive layer.

Fastening, coupling and joining technique between diaspora and irredenta

Science.gov (United States)

Bauer, C.-O.

1980-06-01

The problem of eliminating the present divergence and shattering (diaspora) in the treatment of problems of the fastening, coupling, and joining technique on different technical branches is examined. It is shown that by an appropriate independence the fastening, coupling and joining techniques can recognize and consequently utilize the numerous performance reserves which are concealed by the present organization and action due to the lack of systematically tended works.

Environmentally friendly joining of tubes by their ends

DEFF Research Database (Denmark)

Silva, Carlos M.A.; Nielsen, Chris Valentin; Alves, Luis M.

2015-01-01

This paper proposes an environmentally friendly joining process for connecting tubes by their ends that has the potential to replace current solutions based on fastened, crimped, welded, brazed or adhesive bonded joints. The process is based on a new type of tubular lap joint produced by local...... of deformation and the process feasibility window, and destructive testing to establish the working limits of tubular lap joints under different type of loading conditions. Results demonstrate that the proposed joining process is a flexible and cost-effective technology for connecting tubes by their ends...

The mechanism of non-homologous end-joining: a synopsis of synapsis.

Science.gov (United States)

Weterings, Eric; van Gent, Dik C

2004-11-02

Repair of DNA double-strand breaks (DSBs) by non-homologous end-joining (NHEJ) is required for resistance to genotoxic agents, such as ionizing radiation, but also for proper development of the vertebrate immune system. Much progress has been made in identifying the factors that are involved in this repair pathway. We are now entering the phase in which we begin to understand basic concepts of the reaction mechanism and regulation of non-homologous end-joining. This review concentrates on novel insights into damage recognition and subsequent tethering, processing and joining of DNA ends.

An Adaptive Genetic Algorithm with Dynamic Population Size for Optimizing Join Queries

OpenAIRE

Vellev, Stoyan

2008-01-01

The problem of finding the optimal join ordering executing a query to a relational database management system is a combinatorial optimization problem, which makes deterministic exhaustive solution search unacceptable for queries with a great number of joined relations. In this work an adaptive genetic algorithm with dynamic population size is proposed for optimizing large join queries. The performance of the algorithm is compared with that of several classical non-determinis...

Five Performance Enhancements for Hybrid Hash Join

National Research Council Canada - National Science Library

Graefe, Goetz

1992-01-01

.... We discuss five performance enhancements for hybrid hash join algorithms, namely data compression, large cluster sizes and multi-level recursion, role reversal of build and probe inputs, histogram...

Rhenium Mechanical Properties and Joining Technology

Science.gov (United States)

Reed, Brian D.; Biaglow, James A.

1996-01-01

Iridium-coated rhenium (Ir/Re) provides thermal margin for high performance and long life radiation cooled rockets. Two issues that have arisen in the development of flight Ir/Re engines are the sparsity of rhenium (Re) mechanical property data (particularly at high temperatures) required for engineering design, and the inability to directly electron beam weld Re chambers to C103 nozzle skirts. To address these issues, a Re mechanical property database is being established and techniques for creating Re/C103 transition joints are being investigated. This paper discusses the tensile testing results of powder metallurgy Re samples at temperatures from 1370 to 2090 C. Also discussed is the evaluation of Re/C103 transition pieces joined by both, explosive and diffusion bonding. Finally, the evaluation of full size Re transition pieces, joined by inertia welding, as well as explosive and diffusion bonding, is detailed.

« Russell Banks goes Creole » : A Talk with the Author of The Book of Jamaica and Continental Drift

Directory of Open Access Journals (Sweden)

Kathleen Gyssels et Gaëlle Cooreman

2008-05-01

Full Text Available Cette interview avec Russell Banks, auteur consacré de notamment The Book of Jamaica (1980 et Continental Drift (1985, tous deux traduits en français chez Actes Sud, a été menée le 27 mai 2007 par Kathleen Gyssels et Gaëlle Cooreman (Université d’Anvers. Elles interrogent Banks sur son idée du Great American Novel, son engagement vis-à-vis de la diaspora africaine et ses romans « caribéens », The Book of Jamaica et Continental Drift.This interview with Russell Banks, acknowledged author of The Book of Jamaica (1980 and Continental Drift (1985, amongst others, was conducted on May 27th 2007 by Kathleen Gyssels and Gaëlle Cooreman (University of Antwerp. The main topics included are Banks’ idea of the Great American Novel, his involvement with the African diaspora and his « Caribbean » novels The Book of Jamaica and Continental Drift.

Infrared transient-liquid-phase joining of SCS-6/{beta}21S titanium matrix composite

Energy Technology Data Exchange (ETDEWEB)

Blue, C.A.; Sikka, V.K. [Oak Ridge National Lab., TN (United States). Materials Processing Group; Blue, R.A.; Lin, R.Y. [Univ. of Cincinnati, OH (United States). Dept. of Materials Science and Engineering

1996-02-01

Fiber-reinforced titanium matrix composites (TMCs) are among the advanced materials being considered for use in the aerospace industry due to their light weight, high strength, and high modulus. A rapid infrared joining process has been developed for the joining of composites and advanced materials. Rapid infrared joining has been shown not to have many of the problems associated with conventional joining methods. Two models were utilized to predict the joint evolution and fiber reaction zone growth. TMC, 16-ply SCS-6/{beta}21S, has been successfully joined with total processing times of under 2 min utilizing the rapid infrared joining technique. The process utilizes a 50 C/sec ramping rate, 17-{micro}m Ti-15Cu-15Ni wt % filler material between the faying surfaces; a joining temperature of 1,100 C; and 120 sec of time to join the composite material. Joint shear strength testing of the rapid infrared joints at temperatures as high as 800 C has revealed no joint failures. Also, due to the rapid cooling of the process, no poststabilization of the matrix material is necessary to prevent the formation of a brittle omega phase during subsequent use of the TMC at intermediate temperatures, 270 to 430 C, for up to 20 h.

Why do people join trade unions?

DEFF Research Database (Denmark)

Toubøl, Jonas; Jensen, Carsten Strøby

level on union recruitment, which is not done before. Workplace union density is taken to measure the strength of the workplace’s custom of being union member creating an instrumental incentive to join the union. Self-placement on a political left-right scale measures political attitude taken...

Tungsten foil laminate for structural divertor applications - Joining of tungsten foils

Science.gov (United States)

Reiser, Jens; Rieth, Michael; Möslang, Anton; Dafferner, Bernhard; Hoffmann, Jan; Mrotzek, Tobias; Hoffmann, Andreas; Armstrong, D. E. J.; Yi, Xiaoou

2013-05-01

This paper is the fourth in our series on tungsten laminates. The aim of this paper is to discuss laminate synthesis, meaning the joining of tungsten foils. It is obvious that the properties of the tungsten laminate strongly depend on the combination of (i) interlayer and (ii) joining technology, as this combination defines (i) the condition of the tungsten foil after joining (as-received or recrystallised) as well as (ii) the characteristics of the interface between the tungsten foil and the interlayer (wettability or diffusion leading to a solid solution or the formation of intermetallics). From the example of tungsten laminates joined by brazing with (i) an eutectic silver copper brazing filler, (ii) copper, (iii) titanium, and (iv) zirconium, the microstructure will be discussed, with special focus on the interface. Based on our assumptions of the mechanism of the extraordinary ductility of tungsten foil we present three syntheses strategies and make recommendations for the synthesis of high temperature tungsten laminates.

Aluminum and stainless steel tubes joined by simple ring and welding process

Science.gov (United States)

Townhill, A.

1967-01-01

Duranel ring is used to join aluminum and stainless steel tubing. Duranel is a bimetal made up of roll-bonded aluminum and stainless steel. This method of joining the tubing requires only two welding operations.

Teens join the MoEDAL collaboration

CERN Multimedia

Stephanie Hills

2013-01-01

The principal investigator for any institute joining an experimental collaboration is generally a self-assured researcher with evident leadership skills and an in-depth knowledge of their subject gained over many years. Katherine Evans fits the brief in every respect, except that she is 17 years old and her research institute is the Langton Star Centre, based at the Simon Langton Grammar School for Boys. The school has just joined the MoEDAL experiment.   Teacher Becky Parker (left) with two students from the Simon Langton Grammar School for Boys in the MoEDAL experimental area. MoEDAL, the latest LHC experiment has detectors located close to the interaction point of the LHCb experiment. This new experiment is designed to search for the highly ionizing avatars of new physics at the LHC, specifically the magnetic monopole or dyon and other highly ionizing stable massive particles from a number of beyond-the-Standard-Model scenarios. MoEDAL was approved in 2010 and is due to start taking data i...

Joining of thermoplastic substrates by microwaves

Science.gov (United States)

Paulauskas, Felix L.; Meek, Thomas T.

1997-01-01

A method for joining two or more items having surfaces of thermoplastic material includes the steps of depositing an electrically-conductive material upon the thermoplastic surface of at least one of the items, and then placing the other of the two items adjacent the one item so that the deposited material is in intimate contact with the surfaces of both the one and the other items. The deposited material and the thermoplastic surfaces contacted thereby are then exposed to microwave radiation so that the thermoplastic surfaces in contact with the deposited material melt, and then pressure is applied to the two items so that the melted thermoplastic surfaces fuse to one another. Upon discontinuance of the exposure to the microwave energy, and after permitting the thermoplastic surfaces to cool from the melted condition, the two items are joined together by the fused thermoplastic surfaces. The deposited material has a thickness which is preferably no greater than a skin depth, .delta..sub.s, which is related to the frequency of the microwave radiation and characteristics of the deposited material in accordance with an equation.

Alternative end-joining pathway(s): bricolage at DNA breaks.

Science.gov (United States)

Frit, Philippe; Barboule, Nadia; Yuan, Ying; Gomez, Dennis; Calsou, Patrick

2014-05-01

To cope with DNA double strand break (DSB) genotoxicity, cells have evolved two main repair pathways: homologous recombination which uses homologous DNA sequences as repair templates, and non-homologous Ku-dependent end-joining involving direct sealing of DSB ends by DNA ligase IV (Lig4). During the last two decades a third player most commonly named alternative end-joining (A-EJ) has emerged, which is defined as any Ku- or Lig4-independent end-joining process. A-EJ increasingly appears as a highly error-prone bricolage on DSBs and despite expanding exploration, it still escapes full characterization. In the present review, we discuss the mechanism and regulation of A-EJ as well as its biological relevance under physiological and pathological situations, with a particular emphasis on chromosomal instability and cancer. Whether or not it is a genuine DSB repair pathway, A-EJ is emerging as an important cellular process and understanding A-EJ will certainly be a major challenge for the coming years. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

Joining of metals to structural ceramics

Energy Technology Data Exchange (ETDEWEB)

Sistiaga, J M; Salvador, J M

1988-01-01

A wide review is made on metal-ceramics joining by brazing, mainly by active metal containing brazing filler alloys and solid state welding that is diffusion welding and hot isostatic pressure (HIP). Both the basic aspects of the processes and the mechanisms involved are considsered. At last, different joint testing ands evaluation procedures are presented. (Author)

Joining of metals to structural ceramics

International Nuclear Information System (INIS)

Sistiaga, J.M.; Salvador, J.M.

1988-01-01

A wide review is made on metal-ceramics joining by brazing, mainly by active metal containing brazing filler alloys and solid state welding that is diffusion welding and hot isostatic pressure (HIP). Both the basic aspects of the processes and the mechanisms involved are considered. At last, different joint testing and evaluation procedures are presented. (Author)

History-based joins : semantics, soundness and implementation

NARCIS (Netherlands)

Hee, van K.M.; Oanea, O.I.; Serebrenik, A.; Sidorova, N.; Voorhoeve, M.; Dustdar, S.; Fiadeiro, J.L.; Sheth, A.

2006-01-01

In this paper we study the use of case history for control structures in workflow processes. In particular we introduce a historydependent join. History dependent control offers much more modeling power than classical control structures and it solves several semantical problems of industrial

Sexual selection: Another Darwinian process.

Science.gov (United States)

Gayon, Jean

2010-02-01

Why was sexual selection so important to Darwin? And why was it de-emphasized by almost all of Darwin's followers until the second half of the 20th century? These two questions shed light on the complexity of the scientific tradition named "Darwinism". Darwin's interest in sexual selection was almost as old as his discovery of the principle of natural selection. From the beginning, sexual selection was just another "natural means of selection", although different from standard "natural selection" in its mechanism. But it took Darwin 30 years to fully develop his theory, from the early notebooks to the 1871 book The Descent of Man, and Selection in Relation to Sex. Although there is a remarkable continuity in his basic ideas about sexual selection, he emphasized increasingly the idea that sexual selection could oppose the action of natural selection and be non adaptive. In time, he also gave more weight to mate choice (especially female choice), giving explicit arguments in favor of psychological notions such as "choice" and "aesthetic sense". But he also argued that there was no strict demarcation line between natural and sexual selection, a major difficulty of the theory from the beginning. Female choice was the main reason why Alfred Russel Wallace, the co-discoverer of the principle of natural selection, engaged in a major controversy with Darwin about sexual selection. Wallace was suspicious about sexual selection in general, trying to minimize it by all sorts of arguments. And he denied entirely the existence of female choice, because he thought that it was both unnecessary and an anthropomorphic notion. This had something to do with his spiritualist convictions, but also with his conception of natural selection as a sufficient principle for the evolutionary explanation of all biological phenomena (except for the origin of mind). This is why Wallace proposed to redefine Darwinism in a way that excluded Darwin's principle of sexual selection. The main result of

Tungsten foil laminate for structural divertor applications – Joining of tungsten foils

Energy Technology Data Exchange (ETDEWEB)

Reiser, Jens, E-mail: jens.reiser@kit.edu [Karlsruhe Institute of Technology (KIT), Institute for Applied Materials (IAM-AWP) (Germany); Rieth, Michael; Möslang, Anton; Dafferner, Bernhard; Hoffmann, Jan [Karlsruhe Institute of Technology (KIT), Institute for Applied Materials (IAM-AWP) (Germany); Mrotzek, Tobias; Hoffmann, Andreas [PLANSEE SE, Reutte (Austria); Armstrong, D.E.J.; Yi, Xiaoou [University of Oxford, Department of Materials (United Kingdom)

2013-05-15

This paper is the fourth in our series on tungsten laminates. The aim of this paper is to discuss laminate synthesis, meaning the joining of tungsten foils. It is obvious that the properties of the tungsten laminate strongly depend on the combination of (i) interlayer and (ii) joining technology, as this combination defines (i) the condition of the tungsten foil after joining (as-received or recrystallised) as well as (ii) the characteristics of the interface between the tungsten foil and the interlayer (wettability or diffusion leading to a solid solution or the formation of intermetallics). From the example of tungsten laminates joined by brazing with (i) an eutectic silver copper brazing filler, (ii) copper, (iii) titanium, and (iv) zirconium, the microstructure will be discussed, with special focus on the interface. Based on our assumptions of the mechanism of the extraordinary ductility of tungsten foil we present three syntheses strategies and make recommendations for the synthesis of high temperature tungsten laminates.

Machining, joining and modifications of advanced materials

CERN Document Server

Altenbach, Holm

2016-01-01

This book presents the latest advances in mechanical and materials engineering applied to the machining, joining and modification of modern engineering materials. The contributions cover the classical fields of casting, forming and injection moulding as representative manufacturing methods, whereas additive manufacturing methods (rapid prototyping and laser sintering) are treated as more innovative and recent technologies that are paving the way for the manufacturing of shapes and features that traditional methods are unable to deliver. The book also explores water jet cutting as an innovative cutting technology that avoids the heat build-up typical of classical mechanical cutting. It introduces readers to laser cutting as an alternative technology for the separation of materials, and to classical bonding and friction stir welding approaches in the context of joining technologies. In many cases, forming and machining technologies require additional post-treatment to achieve the required level of surface quali...

Effect of Ti and Si interlayer materials on the joining of SiC ceramics

Energy Technology Data Exchange (ETDEWEB)

Jung, Yang Il; Park, Jung Hwan; Kim, Hyun Gil; Park, Dong Jun; Park, Jeong Yong; Kim, Weon Ju [LWR Fuel Technology Division, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-08-15

SiC-based ceramic composites are currently being considered for use in fuel cladding tubes in light-water reactors. The joining of SiC ceramics in a hermetic seal is required for the development of ceramic-based fuel cladding tubes. In this study, SiC monoliths were diffusion bonded using a Ti foil interlayer and additional Si powder. In the joining process, a very low uniaxial pressure of ∼0.1 MPa was applied, so the process is applicable for joining thin-walled long tubes. The joining strength depended strongly on the type of SiC material. Reaction-bonded SiC (RB-SiC) showed a higher joining strength than sintered SiC because the diffusion reaction of Si was promoted in the former. The joining strength of sintered SiC was increased by the addition of Si at the Ti interlayer to play the role of the free Si in RB-SiC. The maximum joint strength obtained under torsional stress was ∼100 MPa. The joint interface consisted of TiSi{sub 2}, Ti{sub 3}SiC{sub 2}, and SiC phases formed by a diffusion reaction of Ti and Si.

Joining of HHF materials applying electroplating technology

Energy Technology Data Exchange (ETDEWEB)

Krauss, Wolfgang, E-mail: wolfgang.krauss@kit.edu; Lorenz, Julia; Konys, Jürgen

2014-10-15

Highlights: • Electroplating of fillers is industrially relevant for brazing in fusion. • Interlayers (Ni or Pd) improve adherence and reduce failure risks. • Tungsten and Eurofer joints successfully fabricated by electroplating. • Mechanical and non-destructive testing integrated into qualification. • Shear strength of W joints comparable with conventionally brazed steel. - Abstract: Tungsten will be used as armor material for blanket shielding and is designated as high heat flux material for divertors, beyond application of improved W composite alloys as structural material. Independent from design (water- or helium-cooled), a successful development is inherently correlated with joining of tungsten with functional components. Depending on the design variants, the fabricated joints have to guarantee specific functional or structural properties, e.g., good thermal conductivity or mechanical load transmission. Tungsten shows lacks in adapted joining due to its metallurgical behavior ranging from immiscibility over bad wetting to brittle intermetallic phase formation. Electroplating has shown to overcome such drawbacks and that homogeneous functional (e.g., Ni or Pd) and filler (e.g., Cu) layers can be deposited. In this paper the progress achieved in development of electroplating processes for joining W to W or steel to steel will be shown. The main focus will be the characterization of the processed joints applying metallurgical investigations including SEM/EDX analyses and non-destructive testing. The mechanical stability of the produced joints is demonstrated by presenting recent shear test data. The W–W joints failed due to cracking in W, whereas the steel–steel joints cracked in the brazing zone at about 200 N/mm{sup 2} load.

News Release: USDA Joins Fair Food Network, State and Local Partners to

Science.gov (United States)

vitamin C, calcium, and iron. The Food Bank of Eastern Michigan in Flint is distributing those USDA Foods Joins Fair Food Network, State and Local Partners to Promote Nutrition Resources for Lead-Affected Flint Residents News Release: USDA Joins Fair Food Network, State and Local Partners to Promote Nutrition

Five reasons to join local Chamber of Commerce and Industry

OpenAIRE

Verbovskii, Vladislav; Kosov, Vladimir; Chaika (Chayka), Yuliya Aleksandrovna

2016-01-01

The article describes five useful things that Chamber of Commerce and Industry membership may give to business owners after joining it. These things are the reasons to become a part of business community formed by Chambers of Commerce that may be considered by those business owner who are deciding whether to join Chamber of Commerce or not. Mentioned reasons are given with examples related to Tomsk Chamber of Commerce and Industry and are relevant to any Chamber of Commerce located in Russian...

The study on joining carbon/carbon composites using Ti–Ni–Si compound

International Nuclear Information System (INIS)

Wang Jie; Li Kezhi; Song Xinrui; Guo Lingjun; Li Wei; Li Zhaoqian

2012-01-01

Highlights: ► First study to join C/C composites using Ti–Ni–Si compound. ► The average joint shear strength can reach up to 23.58 MPa. ► Strong joints are apt to fracture through interlayer, interfaces and C/C matrix. ► Phase compositions in joints are varied with increasing joining temperature. - Abstract: 2D carbon/carbon (C/C) composites have been successfully joined by partial transient liquid phase (PTLP) bonding using Ti–Ni–Si compound as interlayer. The shear strengths of C/C joints were found to be affected observably by joining temperature, joining pressure and holding time. The optimum process parameters were determined at 1150 °C, 30 MPa, 45 min, and the maximum joint shear strength was obtained under this optimum process condition with an average value of 23.58 MPa. Microstructures and compositions of joints were analyzed by scanning electronic microscopy (SEM), energy disperse spectroscopy (EDS) and X-ray diffraction (XRD). Results showed that element interdiffusions and chemical reactions took place in the joining zone and various compounds including Ni 4 Si 7 Ti 4 , TiSi 2 , SiC and TiC were produced, by which compact interlayer and strong interface were formed in C/C joints. The shear morphology indicated there were three fracture modes in C/C joints and the fracture was apt to occur through interlayer, interface and C/C matrix in strong joints. Thermal shock resistance experimental results revealed that joint shear strength has a rapid drop after 5 thermal cycles and then reduces gradually with the increase of thermal cycles between room temperature and 1000 °C.

Evaluation of the feasibility of joining titanium alloy to heavymet tungsten alloy

Energy Technology Data Exchange (ETDEWEB)

1978-06-07

Information is presented on a program to select and evaluate methods of brazing and/or explosively welding Ti-6Al-4V titanium alloy to Heavymet, a tungsten-base metal containing up to about 20% alloying elements (nickel, copper, etc.) to improve its ductility and other mechanical properties. Designs permitting the reliable production of joints between these base metals were of interest too. While this investigation was primarily concerned with an engineering study of the problems associated with joining these base metals in the required configuration, limited experimental studies were conducted also. The joining methods are reviewed individually. Recommendations for developing a viable titanium-tungsten joining procedure are discussed.

Evaluation of the feasibility of joining titanium alloy to heavymet tungsten alloy

International Nuclear Information System (INIS)

1978-01-01

Information is presented on a program to select and evaluate methods of brazing and/or explosively welding Ti-6Al-4V titanium alloy to Heavymet, a tungsten-base metal containing up to about 20% alloying elements (nickel, copper, etc.) to improve its ductility and other mechanical properties. Designs permitting the reliable production of joints between these base metals were of interest too. While this investigation was primarily concerned with an engineering study of the problems associated with joining these base metals in the required configuration, limited experimental studies were conducted also. The joining methods are reviewed individually. Recommendations for developing a viable titanium-tungsten joining procedure are discussed

Numerical modelling in friction lap joining of aluminium alloy and carbon-fiber-reinforced-plastic sheets

Science.gov (United States)

Das, A.; Bang, H. S.; Bang, H. S.

2018-05-01

Multi-material combinations of aluminium alloy and carbon-fiber-reinforced-plastics (CFRP) have gained attention in automotive and aerospace industries to enhance fuel efficiency and strength-to-weight ratio of components. Various limitations of laser beam welding, adhesive bonding and mechanical fasteners make these processes inefficient to join metal and CFRP sheets. Friction lap joining is an alternative choice for the same. Comprehensive studies in friction lap joining of aluminium to CFRP sheets are essential and scare in the literature. The present work reports a combined theoretical and experimental study in joining of AA5052 and CFRP sheets using friction lap joining process. A three-dimensional finite element based heat transfer model is developed to compute the temperature fields and thermal cycles. The computed results are validated extensively with the corresponding experimentally measured results.

Thermally joining and/or coating or thermally separating the workpieces having heat-sensitive coating, comprises restoring coating by thermally coating the coating material after thermally joining and/or coating or thermally separating

OpenAIRE

Riedel, Frank; Winkelmann, Ralf; Puschmann, Markus

2011-01-01

The method for thermally joining and/or coating or thermally separating the workpieces (1), which have a heat-sensitive coating (2), comprises restoring the coating by thermally coating a coating material (3) after thermally joining and/or coating or thermally separating the workpieces. A part of the thermal energy introduced in the workpiece for joining and/or coating or separating or in the workpieces is used for thermally coating the coating material. Two workpieces are welded or soldered ...

Welding and joining of single crystals of BCC refractory metals

International Nuclear Information System (INIS)

Hiraoka, Yutaka; Fujii, Tadayuki

1989-01-01

Welding and joining is one of key technologies for the wider utilizations of a material. In the present work, the applicability of welding and joining for a single crystal of BCC refractory metal was investigated. Electron-beam welding and tungsten-inert-gas welding by a melt-run technique, and high-temperature brazing by using brazing metals such as Mo-40%Ru alloy, vanadium or platinum were conducted for molybdenum single crystal which had been prepared by means of secondary recrystallization. 12 refs.,12 figs., 2 tabs. (Author)

Glass-ceramic joint and method of joining

Science.gov (United States)

Meinhardt, Kerry D [Richland, WA; Vienna, John D [West Richland, WA; Armstrong, Timothy R [Clinton, TN; Pederson, Larry R [Kennewick, WA

2003-03-18

The present invention is a glass-ceramic material and method of making useful for joining a solid ceramic component and at least one other solid component. The material is a blend of M1-M2-M3, wherein M1 is BaO, SrO, CaO, MgO, or combinations thereof, M2 is Al.sub.2 O.sub.3, present in the blend in an amount from 2 to 15 mol %, M3 is SiO.sub.2 with up to 50 mol % B.sub.2 O.sub.3 that substantially matches a coefficient of thermal expansion of the solid electrolyte. According to the present invention, a series of glass ceramics in the M1-Al.sub.2 O.sub.3 -M3 system can be used to join or seal both tubular and planar solid oxide fuel cells, oxygen electrolyzers, and membrane reactors for the production of syngas, commodity chemicals and other products.

Joining Dental Ceramic Layers With Glass

Science.gov (United States)

Saied, MA; Lloyd, IK; Haller, WK; Lawn, BR

2011-01-01

Objective Test the hypothesis that glass-bonding of free-form veneer and core ceramic layers can produce robust interfaces, chemically durable and aesthetic in appearance and, above all, resistant to delamination. Methods Layers of independently produced porcelains (NobelRondo™ Press porcelain, Nobel BioCare AB and Sagkura Interaction porcelain, Elephant Dental) and matching alumina or zirconia core ceramics (Procera alumina, Nobel BioCare AB, BioZyram yttria stabilized tetragonal zirconia polycrystal, Cyrtina Dental) were joined with designed glasses, tailored to match thermal expansion coefficients of the components and free of toxic elements. Scanning electron microprobe analysis was used to characterize the chemistry of the joined interfaces, specifically to confirm interdiffusion of ions. Vickers indentations were used to drive controlled corner cracks into the glass interlayers to evaluate the toughness of the interfaces. Results The glass-bonded interfaces were found to have robust integrity relative to interfaces fused without glass, or those fused with a resin-based adhesive. Significance The structural integrity of the interfaces between porcelain veneers and alumina or zirconia cores is a critical factor in the longevity of all-ceramic dental crowns and fixed dental prostheses. PMID:21802131

Study of international published experiences in joining copper and copper-alloys

International Nuclear Information System (INIS)

Dahlgren, Aa.

1997-04-01

This study has revealed a number of joining processes to be used when manufacturing copper-canisters for the final storage of high level nuclear waste. However, the decision on which material and which joining process to be used has to be based on the design criterions. The welding procedure has to be qualified, i.e. it shall be demonstrated whether the procedure is capable of fulfilling specified requirements. 32 refs

What happens during a Join? - Dissecting CPU and Memory Optimization Effects

OpenAIRE

Manegold, Stefan; Boncz, Peter; Kersten, Martin

2000-01-01

textabstractPerformance of modern hardware increasingly depends on proper utilization of both the memory cache hierarchy and parallel execution possibilities in todays super-scalar CPUs. Recent database research has demonstrated that database system performance severely suffers from poor utilization of these resources. In previous work, we presented join algorithms that strongly accelerate large equi-join by tuning the memory access pattern to match the characteristics of the memory cache sub...

Joining of silicon carbide using interlayer with matching coefficient of thermal expansion

International Nuclear Information System (INIS)

Perham, T.

1996-11-01

The primary objective of this study is to develop a technique for joining a commercially available Silicon Carbide that gives good room temperature strength and the potential for good high temperature strength. One secondary objective is that the joining technique be adaptable to SiC f /SiC composites and/or Nickel based superalloys, and another secondary objective is that the materials provide good neutron irradiation resistance and low activation for potential application inside nuclear fusion reactors. The joining techniques studied here are: (1) reaction bonding with Al-Si/Si/SiC/C; (2) reaction/infiltration with calcium aluminum silicate; (3) ion exchange mechanism to form calcium hexaluminate (a refractory cement); and (4) oxide frit brazing with cordierite

Calculation of force and time of contact formation at diffusion metal joining

Energy Technology Data Exchange (ETDEWEB)

Sukhanov, V E [Tsentral' nyj Nauchno-Issledovatel' skij Inst. Chernoj Metallurgii, Moscow (USSR); Grushevskij, A V [Moskovskij Stankoinstrumental' nyj Inst., Moscow (USSR); Surovtsev, A P

1989-03-01

An analytical model of contact for mation at diffusion joining is suggested. It is based on the introduction of a rough surface with roughnesses in the form of absolutely rigid spherical segnunts into a smooth laminar body. Mathematical expressions, permitting to calculate maximum welding force (pressure) providing close contact of the surfaces welded and time for contact formation between rough surfaces joined, are obtained. Divergence of calculational and experimental data does not exceed 20%. It is confirmed that the most intensive formation of joining occurs in the initial period of welding -the stage of formation of a physical contact, when deformation processes proceed in tensively. Finite formation of a strength joint occurs at the stage of diffusion interaction.

Combustion Joining for Composite Fabrication

Science.gov (United States)

2009-10-25

Inert preheating Process beginning T e m p e r a t u r e , o C Time, s I = 600 Amps D = 10 mm Joule preheating only up to Tig UNCLASSIFIED • C...Honeywell Corp (South Bend, IN) • Currently build aircraft brake disks from carbon fibers • use a long (~ 100 day) CVD process to densify • Brake wear...oxidation with every landing A380 -rejected take off test C-C brakes UNCLASSIFIED Joining C-Based Materials • Difficult task – Carbon cannot be welded

High-temperature stability of laser-joined silicon carbide components

Energy Technology Data Exchange (ETDEWEB)

Herrmann, Marion, E-mail: marion.herrmann@tu-dresden.de; Lippmann, Wolfgang; Hurtado, Antonio

2013-11-15

Silicon carbide is recommended for applications in energy technology due to its good high-temperature corrosion resistance, mechanical durability, and abrasion resistance. The prerequisite for use is often the availability of suitable technologies for joining or sealing the components. A laser-induced process using fillers and local heating of the components represents a possible low-cost option. Investigations in which yttrium aluminosilicate glass was used for laser-induced brazing of SiC components of varying geometry are presented. A four-point bending strength of 112 MPa was found for these joints. In burst tests, laser-joined components were found to withstand internal pressures of up to 54 MPa. Helium leak tests yielded leak rates of less than 10{sup –8} mbar l s{sup −1}, even after 300 h at 900 °C. In contrast, the assemblies showed an increased leak rate after annealing at 1050 °C. The short process time of the laser technique – in the range of a few seconds to a few minutes – results in high temperature gradients and transients. SEM analysis showed that the filler in the seam predominantly solidifies in a glassy state. Crystallization occurred during later thermal loading of the joined components, with chemical equilibrium being established. Differences in seam structures yielded from different cooling rates in the laser process could not be equalized by annealing. The results demonstrated the long-term stability of laser-brazed SiC assemblies to temperatures in the range of glass transformation (900 °C) of the yttrium aluminosilicate filler. In technological investigations, the suitability of the laser joining technique for sealing of SiC components with a geometry approximating that of a fuel element sleeve pin (pin) in a gas-cooled fast reactor was proven.

Biosynthesis of amidated joining peptide from pro-adrenocorticotropin-endorphin

Energy Technology Data Exchange (ETDEWEB)

Cullen, E.I.; Mains, R.E. (Johns Hopkins Univ. School of Medicine, Baltimore, MD (USA))

1987-09-01

Joining peptide is the major alpha-amidated product of pro-ACTH/endorphin (PAE) in AtT-20 corticotropic tumor cells. To study intracellular joining peptide synthesis, affinity purified antibodies directed against gamma-MSH, joining peptide, and ACTH were used to immunoprecipitate extracts from biosynthetically labeled AtT-20 cells. Immunoprecipitates were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and by tryptic peptide mapping on HPLC. In steady labeling experiments, radioactivity in amidated joining peptide (JP) increased roughly linearly with time, in the manner of a final product, whereas radioactivity associated with PAE (1-94)NH2 reached a constant value after 2-4 h, indicating that PAE(1-94)NH2 is an intermediate in the biosynthesis of JP. Radioactivity appeared in ACTH(1-39) well before JP, consistent with a cleavage order in which ACTH is cleaved from PAE(1-95) before JP sequences are cleaved from PAE(1-74). This conclusion was supported by tryptic peptide analyses of immunoprecipitates, which indicated that less than 5% of JP-related material is cleaved from PAE(1-74) before being cleaved from ACTH-related sequences. After a pulse label, radioactivity in PAE(1-94)NH2 reached a peak value after 1 h of chase and declined with a half-life of less than 1 h. Amidated JP increased to a constant level after 2 h of chase. Enough radiolabeled PAE(1-94)NH2 was detected to account for about half of the radioactivity found in amidated JP, indicating that about half of JP-related material is first cleaved from PAE(1-95) before being amidated. This result was corroborated using HPLC purification to determine both amidated and glycine-extended forms of JP.

Biosynthesis of amidated joining peptide from pro-adrenocorticotropin-endorphin

International Nuclear Information System (INIS)

Cullen, E.I.; Mains, R.E.

1987-01-01

Joining peptide is the major alpha-amidated product of pro-ACTH/endorphin (PAE) in AtT-20 corticotropic tumor cells. To study intracellular joining peptide synthesis, affinity purified antibodies directed against gamma-MSH, joining peptide, and ACTH were used to immunoprecipitate extracts from biosynthetically labeled AtT-20 cells. Immunoprecipitates were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and by tryptic peptide mapping on HPLC. In steady labeling experiments, radioactivity in amidated joining peptide (JP) increased roughly linearly with time, in the manner of a final product, whereas radioactivity associated with PAE (1-94)NH2 reached a constant value after 2-4 h, indicating that PAE(1-94)NH2 is an intermediate in the biosynthesis of JP. Radioactivity appeared in ACTH(1-39) well before JP, consistent with a cleavage order in which ACTH is cleaved from PAE(1-95) before JP sequences are cleaved from PAE(1-74). This conclusion was supported by tryptic peptide analyses of immunoprecipitates, which indicated that less than 5% of JP-related material is cleaved from PAE(1-74) before being cleaved from ACTH-related sequences. After a pulse label, radioactivity in PAE(1-94)NH2 reached a peak value after 1 h of chase and declined with a half-life of less than 1 h. Amidated JP increased to a constant level after 2 h of chase. Enough radiolabeled PAE(1-94)NH2 was detected to account for about half of the radioactivity found in amidated JP, indicating that about half of JP-related material is first cleaved from PAE(1-95) before being amidated. This result was corroborated using HPLC purification to determine both amidated and glycine-extended forms of JP

In-Network Processing of an Iceberg Join Query in Wireless Sensor Networks Based on 2-Way Fragment Semijoins

Directory of Open Access Journals (Sweden)

Hyunchul Kang

2015-03-01

Full Text Available We investigate the in-network processing of an iceberg join query in wireless sensor networks (WSNs. An iceberg join is a special type of join where only those joined tuples whose cardinality exceeds a certain threshold (called iceberg threshold are qualified for the result. Processing such a join involves the value matching for the join predicate as well as the checking of the cardinality constraint for the iceberg threshold. In the previous scheme, the value matching is carried out as the main task for filtering non-joinable tuples while the iceberg threshold is treated as an additional constraint. We take an alternative approach, meeting the cardinality constraint first and matching values next. In this approach, with a logical fragmentation of the join operand relations on the aggregate counts of the joining attribute values, the optimal sequence of 2-way fragment semijoins is generated, where each fragment semijoin employs a Bloom filter as a synopsis of the joining attribute values. This sequence filters non-joinable tuples in an energy-efficient way in WSNs. Through implementation and a set of detailed experiments, we show that our alternative approach considerably outperforms the previous one.

In-Network Processing of an Iceberg Join Query in Wireless Sensor Networks Based on 2-Way Fragment Semijoins

Science.gov (United States)

Kang, Hyunchul

2015-01-01

We investigate the in-network processing of an iceberg join query in wireless sensor networks (WSNs). An iceberg join is a special type of join where only those joined tuples whose cardinality exceeds a certain threshold (called iceberg threshold) are qualified for the result. Processing such a join involves the value matching for the join predicate as well as the checking of the cardinality constraint for the iceberg threshold. In the previous scheme, the value matching is carried out as the main task for filtering non-joinable tuples while the iceberg threshold is treated as an additional constraint. We take an alternative approach, meeting the cardinality constraint first and matching values next. In this approach, with a logical fragmentation of the join operand relations on the aggregate counts of the joining attribute values, the optimal sequence of 2-way fragment semijoins is generated, where each fragment semijoin employs a Bloom filter as a synopsis of the joining attribute values. This sequence filters non-joinable tuples in an energy-efficient way in WSNs. Through implementation and a set of detailed experiments, we show that our alternative approach considerably outperforms the previous one. PMID:25774710

Trend and Development of Semisolid Metal Joining Processing

Directory of Open Access Journals (Sweden)

M. N. Mohammed

2015-01-01

Full Text Available The semisolid metal joining (SSMJ process or thixojoining process has recently been developed based on the principles of SSM processing, which is a technology that involves the formation of metal alloys between solidus and liquidus temperatures. Thixojoining has many potential benefits, which has encouraged researchers to carry out feasibility studies on various materials that could be utilized in this process and which could transform the production of metal components. This paper reviews the findings in the literature to date in this evolving field, specifically, the experimental details, technology considerations for industrialization, and advantages and disadvantages of the various types of SSMJ methods that have been proposed. It also presents details of the range of materials that have been joined by using the SSMJ process. Furthermore, it highlights the huge potential of this process and future directions for further research.

Joining dissimilar materials using Friction Stir scribe technique

Energy Technology Data Exchange (ETDEWEB)

Upadhyay, Piyush; Hovanski, Yuri; Jana, Saumyadeep; Fifield, Leonard S.

2016-10-03

The ability to effectively join materials with vastly different melting points like Aluminum-Steel, Polymer composites - metals has been one of the road blocks in realizing multi-material components for light weighting efforts. Friction stir scribe (FSS) technique is a promising method that produces continuous overlap joint between materials with vastly different melting regimes and high temperature flow characteristics. FSS uses an offset cutting tool at the tip of the FSW pin to create an insitu mechanical interlock between material interfaces. With investments from Vehicle Technology office, US DOE and several automotive manufacturers and suppliers PNNL is developing the FSS process and has demonstrated viability of joining several material combinations. Details of welding trails, unique challenges and mitigation strategies in different material combinations will be discussed. Joint characterization including mechanical tests and joint performances will also be presented.

Bad Luck When Joining the Shortest Queue

NARCIS (Netherlands)

Blanc, J.P.C.

2008-01-01

A frequent observation in service systems with queues in parallel is that customers in other queues tend to be served faster than those in one’s own queue. This paper quantifies the probability that one’s service would have started earlier if one had joined another queue than the queue that was

On a possible empirical meaning of meets and joins for quantum propositions

Science.gov (United States)

Herbut, Fedor

1984-09-01

Following up an idea of Jauch, an empirical basis is worked out for the meets (and joins) of quantum propositions through approximate measurement to an arbitrary degree of accuracy of special yes-no effects constructed from chains of yes-no measurements. This is done with a view to interpreting the meets (and joins) as Dedekind's cuts in analogy with irrationals.

On a possible empirical meaning of meets and joins for quantum propositions

International Nuclear Information System (INIS)

Herbut, F.

1984-01-01

Following up an idea of Jauch, an empirical basis is worked out for the meets (and joins) of quantum propositions through approximate measurement to an arbitrary degree of accuracy of special yes-no effects constructed from chains of yes-no measurements. This is done with a view to interpreting the meets (and joins) as Dedekind's cuts in analogy with irrationals. (orig.)

A New Approach to Joining Dissimilar Ceramic Oxides for Chemical Sensors

International Nuclear Information System (INIS)

Zhuiykov, Serge

2009-01-01

Conventional joining of dissimilar oxides for sensing electrodes (SE) of chemical sensors has been pivotal to the development of various sensors and is vital to their further development. However, it is shown that the uncertainty (of a fundamental nature) in the properties of dissimilar oxides in SE causes the determination of their sensing characteristics to be ambiguous. Characteristics are different for such controlled parameters as pyrolysis temperature, crystal structure, particle's morphology and size, chemical and phase composition, the coefficient of thermal expansion (CTE), surface architecture, the bulk and surface stoichiometry and type and conductivity of additives. Here, we provide an alternative approach for joining dissimilar metal-oxides for chemical sensors SE. The approach relies on the development of at least one transient liquid oxide phase on the ceramic-SE interface. These results constitute key points relevant to selection oxides for joining, sintering temperatures and heating/cooling temperature rates.

References and arrow notation instead of join operation in query languages

Directory of Open Access Journals (Sweden)

Alexandr Savinov

2012-10-01

Full Text Available We study properties of the join operation in query languages and describe some of its major drawbacks. We provide strong arguments against using joins as a main construct for retrieving related data elements in general purpose query languages and argue for using references instead. Since conventional references are quite restrictive when applied to data modeling and query languages, we propose to use generalized references as they are defined in the concept-oriented model (COM. These references are used by two new operations, called projection and de-projection, which are denoted by right and left arrows and therefore this access method is referred to as arrow notation. We demonstrate advantages of the arrow notation in comparison to joins and argue that it makes queries simpler, more natural, easier to understand, and the whole query writing process more productive and less error-prone.

Efficient algorithms for factorization and join of blades

NARCIS (Netherlands)

Fontijne, D.; Dorst, L.; Bayro-Corrochano, E.; Scheuermann, G.

2010-01-01

Subspaces are powerful tools for modeling geometry. In geometric algebra, they are represented using blades and constructed using the outer product. Producing the actual geometrical intersection (meet) and union (join) of subspaces, rather than the simplified linearizations often used in

Efficient algorithms for factorization and join of blades

NARCIS (Netherlands)

Fontijne, D.

2008-01-01

Subspaces are powerful tools for modeling geometry. In geometric algebra, they are represented using blades and constructed using the outer product. To produce the actual geometrical intersection (Meet) and union (Join) of subspaces, rather than the simplified linearizations often used in

Women's Heart Disease: Join the Heart Truth Community

Science.gov (United States)

... this page please turn JavaScript on. Feature: Women's Heart Disease Join The Heart Truth Community Past Issues / Winter 2014 Table of Contents National Symbol The centerpiece of The Heart Truth ® is The Red Dress ® which was introduced ...

Joining of Tungsten Armor Using Functional Gradients

International Nuclear Information System (INIS)

John Scott O'Dell

2006-01-01

The joining of low thermal expansion armor materials such as tungsten to high thermal expansion heat sink materials has been a major problem in plasma facing component (PFC) development. Conventional planar bonding techniques have been unable to withstand the high thermal induced stresses resulting from fabrication and high heat flux testing. During this investigation, innovative functional gradient joints produced using vacuum plasma spray forming techniques have been developed for joining tungsten armor to copper alloy heat sinks. A model was developed to select the optimum gradient architecture. Based on the modeling effort, a 2mm copper rich gradient was selected. Vacuum plasma pray parameters and procedures were then developed to produce the functional gradient joint. Using these techniques, dual cooling channel, medium scale mockups (32mm wide x 400mm length) were produced with vacuum plasma spray formed tungsten armor. The thickness of the tungsten armor was up to 5mm thick. No evidence of debonding at the interface between the heat sink and the vacuum plasma sprayed material was observed.

Ice-dammed lake drainage evolution at Russell Glacier, west Greenland

Science.gov (United States)

Carrivick, Jonathan L.; Tweed, Fiona S.; Ng, Felix; Quincey, Duncan J.; Mallalieu, Joseph; Ingeman-Nielsen, Thomas; Mikkelsen, Andreas B.; Palmer, Steven J.; Yde, Jacob C.; Homer, Rachel; Russell, Andrew J.; Hubbard, Alun

2017-11-01

Glaciological and hydraulic factors that control the timing and mechanisms of glacier lake outburst floods (GLOFs) remain poorly understood. This study used measurements of lake level at fifteen minute intervals and known lake bathymetry to calculate lake outflow during two GLOF events from the northern margin of Russell Glacier, west Greenland. We used measured ice surface elevation, interpolated subglacial topography and likely conduit geometry to inform a melt enlargement model of the outburst evolution. The model was tuned to best-fit the hydrograph’s rising limb and timing of peak discharge in both events; it achieved Mean Absolute Errors of Lake water temperature, which strongly governed the enlargement rate, preconditioned the high peak discharge and short duration of these floods. We hypothesize that both GLOFs were triggered by ice dam flotation, and localised hydraulic jacking sustained most of their early-stage outflow, explaining the particularly rapid water egress in comparison to that recorded at other ice-marginal lakes. As ice overburden pressure relative to lake water hydraulic head diminished, flow became confined to a subglacial conduit. This study has emphasised the inter-play between ice dam thickness and lake level, drainage timing, lake water temperature and consequently rising stage lake outflow and flood evolution.

[Joining WHO of Republic of Korea and the projects in the 1950s].

Science.gov (United States)

Lee, Sun Ho

2014-04-01

The Republic of Korea(ROK) and the World Health Organization(WHO) have done many projects successfully from 1949, in which the government of First Republic joined the WHO. However the relation between the ROK and the WHO have not been studied very much so far. The main purpose of this research, which could be done by the support of WHO, is connected with three questions. First research point would be "how could the ROK joined WHO in 1949 and what's the meaning of it? And the what's the difference in the process for the WHO between the ROK of 1949 and the DPRK(Democratic People's Republic of Korea) of 1973?" The first president of the ROK, Rhee Syngman, who had received his Ph. D.(about international politics) from Princeton University in 1910, was strongly interested in joining international institutes like UN, WHO. The ROK that could join WHO on 17 August 1949, with the approval of Assembly on 25 May 1949, was one of the founder members of the Western Pacific Region. By joining WHO, the ROK could get chance to increase the level of public health and its administration in 1950's. But the DPRK manage to became a member of WHO on 19 May 1973 and joined the South-East Asia Region. The joining of DPRK was influenced by the easing of the cold war after the Nixon Doctrine and the joining of the China(People's Republic of China). Second research point would be "What kind of roll did the WHO take in the First Republic?" Yet the public health administration of the First Republic that had been made in the period of US army military government was been strongly influenced by USA, the roll of WHO was also important in the 1950's. Last research point would be "What kind of the projects did the ROK and the WHO take part in during the period of he First Republic? How could evaluate the results?" The ROK and the WHO handled the projects including health services, communicable disease prevention and control, control of noncommunicable diseases, and protection of health. Specially

Joining Silicon Carbide Components for Space Propulsion, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — This SBIR Phase I program will identify the joining materials and demonstrate the processes that are suited for construction of advanced ceramic matrix composite...

In Vitro and In Vivo Evaluation of Polyherbal Formulation against Russell's Viper and Cobra Venom and Screening of Bioactive Components by Docking Studies

Science.gov (United States)

Sakthivel, G.; Dey, Amitabha; Nongalleima, Kh.; Chavali, Murthy; Rimal Isaac, R. S.; Singh, N. Surjit; Deb, Lokesh

2013-01-01

The present study emphasizes to reveal the antivenom activity of Aristolochia bracteolata Lam., Tylophora indica (Burm.f.) Merrill, and Leucas aspera S. which were evaluated against venoms of Daboia russelli russelli (Russell's viper) and Naja naja (Indian cobra). The aqueous extracts of leaves and roots of the above-mentioned plants and their polyherbal (1 : 1 : 1) formulation at a dose of 200 mg/kg showed protection against envenomed mice with LD50 doses of 0.44 mg/kg and 0.28 mg/kg against Russell's viper and cobra venom, respectively. In in vitro antioxidant activities sample extracts showed free radical scavenging effects in dose dependent manner. Computational drug design and docking studies were carried out to predict the neutralizing principles of type I phospholipase A2 (PLA2) from Indian common krait venom. This confirmed that aristolochic acid and leucasin can neutralize type I PLA2 enzyme. Results suggest that these plants could serve as a source of natural antioxidants and common antidote for snake bite. However, further studies are needed to identify the lead molecule responsible for antidote activity. PMID:23533518

Contribution to the joining technique of SiC-ceramic using metallic interlayers

International Nuclear Information System (INIS)

Gottselig, B.; Gyarmati, E.; Naoumidis, A.; Nickel, H.

1989-07-01

For ceramics to be feasible for technical uses suitable joining techniques must be developed that allow reliable ceramic-ceramic and ceramic-metal connections. As yet such procedures exist, based only on empirical studies omitting the reaction behaviour of the joining materials and the specific properties of the reaction products. For this reason the reaction behaviour of silicon carbide with selected metals and subsequently the compatibility of these reaction layers with the ceramic substrate were investigated. The results gained were then applied to silicon carbide joints using intermediate metallic layers. With the reaction phase Ti 3 SiC 2 , found to be the most suitable in basic experiments, joining strengths could be obtained relative tc the mean strength and Weibull modulus comparable to those of the ceramic starting material. (orig.) [de

Joining technology development summary, 189a OH024

International Nuclear Information System (INIS)

Edmonds, D.P.

1978-01-01

Joining technology is discussed for Breeder Reactor technology including welding development and mechanical properties of weldments for austenitic stainless steels, high-temperature structural design data for austenitic stainless steel weldments and advanced transition joints is discussed. Technology developed in this program is briefly reviewed

COMPETITIVENESS ОF CHINESE ECONOMY AFTER JOINING WORLD TRADE ORGANIZATION

Directory of Open Access Journals (Sweden)

V. S. Shlik

2008-01-01

Full Text Available The paper contains analysis of the China’s membership in the World Trade Organization (WTO. The advantages and disadvantages of WTO joining and also prospects and unforeseen difficulties are given in the paper. The People’s Republic of China has already been a full-member of WTO for 6 years. The Chinese Government has mainly fulfilled all the conditions which were imposed for WTO joining. They concerned customs legislation that presupposed a considerable reduction of custom duties, an access to the service market for foreign investors, an increase of responsibility for violation of intellectual property rights. Many of these conditions have been fulfilled in advance.

Joining method for pressure tube and martensitic stainless steel tube

International Nuclear Information System (INIS)

Kimoto, Hiroshi; Koike, Hiromitsu.

1993-01-01

In a joining portion of zirconium alloy and a stainless steel, the surface of martensitic stainless steel being in contact with Zr and Zr alloy is applied with a laser quenching solidification treatment before expanding joining of them to improve the surface. This can provide the surface with refined coagulated cell tissues and make deposits and impurities homogeneous and solubilized. As a result, the surface of the martensitic stainless steel has highly corrosion resistance, to suppress contact corrosion with Zr and Zr alloy. Accordingly, even if it is exposed to high temperature water of 200 to 350degC, failures of Zr and Zr alloy can be suppressed. (T.M.)

Research and Development Opportunities for Joining Technologies in HVAC&R

Energy Technology Data Exchange (ETDEWEB)

Goetzler, William [Navigant Consulting, Burlington, MA (United States); Guernsey, Matt [Navigant Consulting, Burlington, MA (United States); Young, Jim [Navigant Consulting, Burlington, MA (United States)

2015-10-01

The Building Technologies Office (BTO) works with researchers and industry partners to develop and deploy technologies that can substantially reduce energy consumption and greenhouse gas (GHG) emissions in residential and commercial buildings. This opportunity assessment aims to advance BTO’s energy savings, GHG reduction, and other program goals by identifying research and development (R&D) initiatives for joining technologies in heating, ventilation, air-conditioning, and refrigeration (HVAC&R) systems. Improving joining technologies for HVAC&R equipment has the potential to increase lifetime equipment operating efficiency, decrease equipment and project cost, and most importantly reduce hydroflourocarbon (HFC) refrigerant leakage to support HFC phasedown and GHG reduction goals.

Status of Joining Thin Sheet and Thin Wall Tubes of 14YWT

Energy Technology Data Exchange (ETDEWEB)

Hoelzer, David T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Unocic, Kinga A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tang, Wei [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Feng, Zhili [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-09-18

Beginning this fiscal year, the FCRD research project initiated an investigation on joining thin sections of the advanced ODS 14YWT ferritic alloy. Friction stir welding (FSW) was investigated as a method to join thin plate and tubing of 14YWT since it is a solid state joining method that has been shown in past studies to be a promising method for joining plates of ODS alloys, such as 14YWT. However, this study will attempt to be the first to demonstrate if FSW can successfully join thin plates and thin wall tubing of 14YWT. In the first FSW attempt, a 1.06 cm thick plate of 14YWT (SM13 heat) was successfully rolled at 1000ºC to the target thickness of 0.1 cm with no edge cracking. This achievement is a highlight since previous attempts to roll 14YWT plates have resulted in extensive cracking. For the FSW run, a pin tool being developed by the ORNL FSW Process Development effort was used. The first FSW run successfully produced a bead-on-plate weld in the 0.1 cm thick plate. The quality of the weld zone appears very good with no evidence of large defects such as cavities. The microstructural characterization study of the bead-on-plate weld zone has been initiated to compare the results of the microstructure analysis with those obtained in the reference microstructural analysis of the 14YWT (SM13 heat) that showed ultra-fine grain size of 0.43 μm and a high number density of ~2-5 nm sizes oxygen-enriched nanoclusters.

Alternative electro-chemically based processing routes for joining of plasma facing components

Energy Technology Data Exchange (ETDEWEB)

Krauss, Wolfgang, E-mail: wolfgang.krauss@kit.edu [Karlsruhe Institute of Technology (KIT), Institute for Materials Research III, Hermann-von-Helmholtz-Platz 1 76344 Eggenstein-Leopoldshafen (Germany); Lorenz, Julia; Holstein, Nils; Konys, Juergen [Karlsruhe Institute of Technology (KIT), Institute for Materials Research III, Hermann-von-Helmholtz-Platz 1 76344 Eggenstein-Leopoldshafen (Germany)

2011-10-15

Tungsten is considered in fusion technology as functional and structural material in the area of blanket and divertor for future application in DEMO. The KIT design of a He-cooled divertor includes joints between W and W-alloys as well as of W with Eurofer-steel. The main challenges range from expansion mismatch problem for tungsten/steel joints over metallurgical reactions with brittle phase formation to crack stopping ability and excellent surface wetting. These requirements were only met partly and insufficiently in the past e.g. by direct Cu-casting of tungsten onto steel. Both, the joining needs and the observed failure scenarios of conventionally joined components initiated the development of improved joining technologies based on electro-chemical processing routes. As electrolytes aqueous and aprotic, water free, system are integrated into this development line. In the first step principle requirements are presented to guarantee a reproducible and adherent deposition of scales based on Ni and Cu acting as inter layers and filler, respectively, to generate a real metallurgical bonding as demonstrate by 1100 deg. C joining tests. The development field aprotic systems based on ionic liquids is discussed with respect to enable development of refractory metal based fillers with focus high temperature W-W brazing.

A review of the US joining technologies for plasma facing components in the ITER fusion reactor

International Nuclear Information System (INIS)

Odegard, B.C. Jr.; Cadden, C.H.; Watson, R.D.; Slattery, K.T.

1998-02-01

This paper is a review of the current joining technologies for plasma facing components in the US for the International Thermonuclear Experimental Reactor (ITER) project. Many facilities are involved in this project. Many unique and innovative joining techniques are being considered in the quest to join two candidate armor plate materials (beryllium and tungsten) to a copper base alloy heat sink (CuNiBe, OD copper, CuCrZr). These techniques include brazing and diffusion bonding, compliant layers at the bond interface, and the use of diffusion barrier coatings and diffusion enhancing coatings at the bond interfaces. The development and status of these joining techniques will be detailed in this report

Load Balancing Issues with Constructing Phylogenetic Trees using Neighbour-Joining Algorithm

International Nuclear Information System (INIS)

Al Mamun, S M

2012-01-01

Phylogenetic tree construction is one of the most important and interesting problems in bioinformatics. Constructing an efficient phylogenetic tree has always been a research issue. It needs to consider both the correctness and the speed of the tree construction. In this paper, we implemented the neighbour-joining algorithm, using Message Passing Interface (MPI) for constructing the phylogenetic tree. Performance is efficacious, comparing to the best sequential algorithm. From this paper, it would be clear to the researchers that how load balance can make a great effect for constructing phylogenetic trees using neighbour-joining algorithm.

People's Republic of China joins ITER

International Nuclear Information System (INIS)

Huo Yuping

2003-01-01

The People's Republic of China is the largest developing country with a projected population of 1.6 - 2 billion people and an energy consumption growing from the current 1.3 Billion Tons Coal Equivalent (TCE) to more than 4 Billion TCE by 2050. This large demand needs to be accommodated in a sustainable way, requiring energy generation in an environmentally friendly way. Fusion is one of the most promising candidates to solve this important issue. This explains why in the second half of 2002, the ITER Participants' delegations to the ITER Negotiations received expression of interest from the People's Republic of China in the possibility of Chinese participation in ITER, including joining the ongoing Negotiations. The speed with which the Chinese authorities had made their decision to participate in the ITER Negotiations was impressive. The Prime Minister and the State Council had already confirmed their decision to apply to join ITER as soon as possible, and Mr. Xu Guanhua, Chinese Minister of Science and Technology, wrote on behalf of his government, on 10 January 2003, to the four heads of delegation in the ITER Negotiations, requesting that China participate in the present ITER Negotiations, pointing out that China intends to provide a substantial contribution to the Project, comparable to what is currently envisaged by some of the participants in the present Negotiations

Method of and apparatus for use in joining tubular components and tube assemblies made thereby

International Nuclear Information System (INIS)

Percival, S.R.

1979-01-01

A method of joining difficult to weld materials involves the forming of a rolled joint. A particular application is the joining of zirconium alloy calandria tubes to stainless steel tube-plates in a SGHWR. (UK)

Advanced fusion welding processes, solid state joining and a successful marriage. [production of aerospace structures

Science.gov (United States)

Miller, F. R.

1972-01-01

Joining processes for aerospace systems combine fusion welding and solid state joining during production of metal structures. Detailed characteristics of electron beam welding, plasma arc welding, diffusion welding, inertia welding and weldbond processes are discussed.

Borated stainless steel joining technology. Final report

International Nuclear Information System (INIS)

Smith, R.J.

1994-12-01

EPRI had continued investigating the application of borated stainless steel products within the US commercial nuclear power industry through participation in a wide range of activities. This effort provides the documentation of the data obtained in the development of the ASTM-A887 Specification preparation effort conducted by Applied Science and Technology and the most recent efforts for the development of joining technologies conducted under a joint effort by EPRI, Carpenter Technologies and Sandia National Laboratory under a US DOE CRADA program. The data presented in this report provides the basis for the ASTM specification which has been previously unpublished by EPRI and the data generated in support of the Joining Technology research effort conducted at Sandia. The results of the Sandia research, although terminated prior to the completion, confirms earlier data that the degradation of material properties in fusion welded borated stainless steels occurs in the heat affected zone of the weld area and not in the base material. The data obtained also supports the conclusion that the degradation of material properties can be overcome by post weld heat treatment which can result in material properties near the original unwelded metal

Governing Bodies That Consider Joining or Creating Federations

Science.gov (United States)

Howarth, Eleanor

2015-01-01

This article reports the findings of a research study exploring what motivates governing bodies to consider joining or creating a federation, their experiences of the process and the barriers faced. The research methodology involved semi-structured telephone interviews, face-to-face interviews and analysis of relevant documentation. The varied…

Joining Forces: The Case of Alliant International University

Science.gov (United States)

Leslie, Heather

2013-01-01

Mergers and acquisitions are a prevalent force in higher education as more colleges and universities are joining forces to expand resources, enhance missions, or prevent closures. This study examines the merger of Alliant University (formerly California School of Professional Psychology) with United States International University to create what…

46 CFR 56.75-30 - Pipe joining details.

Science.gov (United States)

2010-10-01

... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND... cut or machined square and the edges shall be held closely together to insure a satisfactory joint. (b... satisfactory for the brazing alloy to be employed, method of heating, and material to be joined. The annular...

The development of joining doped graphite to copper for first wall application in HT-7 tokamak

Energy Technology Data Exchange (ETDEWEB)

Zhou Zhangjian, E-mail: zhouzhj@mater.ustb.edu.cn [School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Zhong Zhihong [School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Chen Junling [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Ge Changchun [School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China)

2010-12-15

Two joining methods have been developed for joining carbon based plasma facing material to copper based heat sink material for the potential application in HT-7 and EAST tokamak. The first joining method is based on brazing technique by using a rapidly solidified foil-type Ti-Zr based amorphous filler with a melting temperature of 850 deg. C. The other joining method is direct active metal casting-casting the premixed powders of copper and active transition metals on the mechanical machined carbon surface directly. SEM observations demonstrate high quality of joining surface for both joints. The brazing technique is more promising for fabrication joint with larger size compared with the direct active alloy casting method. High heat flux test using an e-beam device was performed on the actively cooled C/Cu joint fabricated by brazing method. There has no damage occurred on the joint after heat loading at 6 MW/m{sup 2}.

International Symposium on Interfacial Joining and Surface Technology (IJST2013)

International Nuclear Information System (INIS)

Takahashi, Yasuo

2014-01-01

Interfacial joining (bonding) is a widely accepted welding process and one of the environmentally benign technologies used in industrial production. As the bonding temperature is lower than the melting point of the parent materials, melting of the latter is kept to a minimum. The process can be based on diffusion bonding, pressure welding, friction welding, ultrasonic bonding, or brazing-soldering, all of which offer many advantages over fusion welding. In addition, surface technologies such as surface modification, spraying, coating, plating, and thin-film formation are necessary for advanced manufacturing, fabrication, and electronics packaging. Together, interfacial joining and surface technology (IJST) will continue to be used in various industrial fields because IJST is a very significant form of environmentally conscious materials processing. The international symposium of IJST 2013 was held at Icho Kaikan, Osaka University, Japan from 27–29 November, 2013. A total of 138 participants came from around the world to attend 56 oral presentations and 36 posters presented at the symposium, and to discuss the latest research and developments on interfacial joining and surface technologies. This symposium was also held to commemorate the 30th anniversary of the Technical Commission on Interfacial Joining of the Japan Welding Society. On behalf of the chair of the symposium, it is my great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering (MSE). Among the presentations, 43 papers are published here, and I believe all of the papers have provided the welding community with much useful information. I would like to thank the authors for their enthusiastic and excellent contributions. Finally, I would like to thank all members of the committees, secretariats, participants, and everyone who contributed to this symposium through their support and invaluable effort for the success of IJST 2013. Yasuo Takahashi Chair of IJST 2013

International Symposium on Interfacial Joining and Surface Technology (IJST2013)

Science.gov (United States)

Takahashi, Yasuo

2014-08-01

Interfacial joining (bonding) is a widely accepted welding process and one of the environmentally benign technologies used in industrial production. As the bonding temperature is lower than the melting point of the parent materials, melting of the latter is kept to a minimum. The process can be based on diffusion bonding, pressure welding, friction welding, ultrasonic bonding, or brazing-soldering, all of which offer many advantages over fusion welding. In addition, surface technologies such as surface modification, spraying, coating, plating, and thin-film formation are necessary for advanced manufacturing, fabrication, and electronics packaging. Together, interfacial joining and surface technology (IJST) will continue to be used in various industrial fields because IJST is a very significant form of environmentally conscious materials processing. The international symposium of IJST 2013 was held at Icho Kaikan, Osaka University, Japan from 27-29 November, 2013. A total of 138 participants came from around the world to attend 56 oral presentations and 36 posters presented at the symposium, and to discuss the latest research and developments on interfacial joining and surface technologies. This symposium was also held to commemorate the 30th anniversary of the Technical Commission on Interfacial Joining of the Japan Welding Society. On behalf of the chair of the symposium, it is my great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering (MSE). Among the presentations, 43 papers are published here, and I believe all of the papers have provided the welding community with much useful information. I would like to thank the authors for their enthusiastic and excellent contributions. Finally, I would like to thank all members of the committees, secretariats, participants, and everyone who contributed to this symposium through their support and invaluable effort for the success of IJST 2013. Yasuo Takahashi Chair of IJST 2013

Using Negotiated Joining to Construct and Fill Open-ended Roles in Elite Culinary Groups.

Science.gov (United States)

Tan, Vaughn

2015-03-01

This qualitative study examines membership processes in groups operating in an uncertain environment that prevents them from fully predefining new members' roles. I describe how nine elite high-end, cutting-edge culinary groups in the U.S. and Europe, ranging from innovative restaurants to culinary R&D groups, use negotiated joining-a previously undocumented process-to systematically construct and fill these emergent, open-ended roles. I show that negotiated joining is a consistently patterned, iterative process that begins with a role that both aspirant and target group explicitly understand to be provisional. This provisional role is then jointly modified and constructed by the aspirant and target group through repeated iterations of proposition, validation through trial and evaluation, and selective integration of validated role components. The initially provisional role stabilizes and the aspirant achieves membership if enough role components are validated; otherwise the negotiated joining process is abandoned. Negotiated joining allows the aspirant and target group to learn if a mutually desirable role is likely and, if so, to construct such a role. In addition, the provisional roles in negotiated joining can support absorptive capacity by allowing novel role components to enter target groups through aspirants' efforts to construct stable roles for themselves, while the internal adjustment involved in integrating newly validated role components can have the unintended side effect of supporting adaptation by providing opportunities for the groups to use these novel role components to modify their role structure and goals to suit a changing and uncertain environment. Negotiated joining thus reveals role ambiguity's hitherto unexamined beneficial consequences and provides a foundation for a contingency theory of new-member acquisition.

The Mechanism of Solid State Joining THA with AlMg3Mn Alloy

Directory of Open Access Journals (Sweden)

Kaczorowski M.

2014-06-01

Full Text Available The results of experimental study of solid state joining of tungsten heavy alloy (THA with AlMg3Mn alloy are presented. The aim of these investigations was to study the mechanism of joining two extremely different materials used for military applications. The continuous rotary friction welding method was used in the experiment. The parameters of friction welding process i.e. friction load and friction time in whole studies were changed in the range 10 to 30kN and 0,5 to 10s respectively while forging load and time were constant and equals 50kN and 5s. The results presented here concerns only a small part whole studies which were described elsewhere. These are focused on the mechanism of joining which can be adhesive or diffusion controlled. The experiment included macro- and microstructure observations which were supplemented with SEM investigations. The goal of the last one was to reveal the character of fracture surface after tensile test and to looking for anticipated diffusion of aluminum into THA matrix. The results showed that joining of THA with AlMg2Mn alloy has mainly adhesive character, although the diffusion cannot be excluded.

Accelerating foreign-key joins using asymmetric memory channels

NARCIS (Netherlands)

Pirk, H.; Manegold, S.; Kersten, M.

2011-01-01

Indexed Foreign-Key Joins expose a very asymmetric access pattern: the Foreign-Key Index is sequentially scanned whilst the Primary-Key table is target of many quasi-random lookups which is the dominant cost factor. To reduce the costs of the random lookups the fact-table can be (re-) partitioned at

Development of a double beam process for joining aluminum and steel

Science.gov (United States)

Frank, Sascha

2014-02-01

Multi-material structures pose an attractive option for overcoming some of the central challenges in lightweight design. An exceptionally high potential for creating cost-effective lightweight solutions is attributed to the combination of steel and aluminum. However, these materials are also particularly difficult to join due to their tendency to form intermetallic compounds (IMCs). The growth of these compounds is facilitated by high temperatures and long process times. Due to their high brittleness, IMCs can severely weaken a joint. Thus, it is only possible to create durable steel-aluminum joints when the formation of IMCs can be limited to a non-critical level. To meet this goal, a new joining method has been designed. The method is based on the combination of a continuous wave (pw) and a pulsed laser (pw) source. Laser beams from both sources are superimposed in a common process zone. This makes it possible to apply the advantages of laser brazing to mixed-metal joints without requiring the use of chemical fluxes. The double beam technology was first tested in bead-on-plate experiments using different filler wire materials. Based on the results of these tests, a process for joining steel and aluminum in a double-flanged configuration is now being developed. The double flanged seams are joined using zinc- or aluminum-based filler wires. Microsections of selected seams show that it is possible to achieve good base material wetting while limiting the growth of IMCs to acceptable measures. In addition, the results of tensile tests show that high joint strengths can be achieved.

Understanding the spark plasma sintering from the view of materials joining

International Nuclear Information System (INIS)

Dong, Peng; Wang, Zhe; Wang, Wenxian; Chen, Shaoping; Zhou, Jun

2016-01-01

Spark plasma sintering (SPS) is an attractive consolidation process. However, the mechanism behind this process is still an open topic for debate. This paper presents the first attempt to understand the SPS mechanism from perspective of materials joining. For this, TiNi_f/Al composites were fabricated by SPS, and the interfacial microstructures were investigated using field emission scanning electron microscopy and transmission electron microscopy. According to the experimental results, several joining processes were reflected well during SPS, involving micro-arc welding, electric resistance welding and diffusion welding. The proposed understanding of SPS will be helpful to the control of sintering quality.

Loosening and damage mechanism of thread-joined structures in nuclear power equipment

International Nuclear Information System (INIS)

Tang Hui

1999-01-01

The author proposes a loosening mechanism of thread-joined structures under vibrate environments in the nuclear power equipment and structures, which is on the base of the macro and imperceptible-mechanics analysis. It has answered the problems on the seizing, the adhesive wearing, the generation of cracks, the thread-tooth fracture. So it has a conclusion that the loosening of thread-joined structures is essential trend, in other words, the locking property of thread-pair is failure under vibrate environments

A construção do número: os modelos de Klahr & Wallace; Von Glasersfeld e K. Fuson

Directory of Open Access Journals (Sweden)

Maria da Conceição Rodrigues Ferreira

Full Text Available No âmbito dos estudos sobre o pensamento aritmético, a compreensão do desenvolvimento do conceito de número tem sido alvo de controvérsia, desde a interpretação de que a aprendizagem da matemática se dá, principalmente, através da formação de conexões internas, até o estudo dos processos cognitivos subjacentes ao raciocínio aritmético. Assim, a influência da interpretação construtivista da gênese das estruturas lógicas estende-se não só a Von Glasersfeld (1988, que postula que os conceitos abstratos são construídos a partir de experiências do quotidiano, como também à influência que o social exerce na construção dos processos subjacentes ao raciocínio aritmético (Fuson, 1988; Fuson & Burghardt, 2003. Inversamente a essa interpretação, a perspectiva inatista do desenvolvimento (Gelman & Gallistel, 1978; Klahr & Wallace, 1973 propõe que as crianças nascem com princípios lógicos inerentes à construção do conhecimento aritmético elementar.

Characterization of joining sites of a viral histone H4 on host insect chromosomes.

Directory of Open Access Journals (Sweden)

Sunil Kumar

Full Text Available A viral histone H4 (CpBV-H4 is encoded in a polydnavirus, Cotesia plutellae bracovirus (CpBV. It plays a crucial role in parasitism of an endoparasitoid wasp, C. plutellae, against diamondback moth, Plutella xylostella, by altering host gene expression in an epigenetic mode by its N-terminal tail after joining host nucleosomes. Comparative transcriptomic analysis between parasitized and nonparasitized P. xylostella by RNA-Seq indicated that 1,858 genes were altered at more than two folds in expression levels at late parasitic stage, including 877 up-regulated genes and 981 down-regulated genes. Among parasitic factors altering host gene expression, CpBV-H4 alone explained 16.3% of these expressional changes. To characterize the joining sites of CpBV-H4 on host chromosomes, ChIP-Seq (chromatin immunoprecipitation followed by deep sequencing was applied to chromatins extracted from parasitized larvae. It identified specific 538 ChIP targets. Joining sites were rich (60.2% in AT sequence. Almost 40% of ChIP targets included short nucleotide repeat sequences presumably recognizable by transcriptional factors and chromatin remodeling factors. To further validate these CpBV-H4 targets, CpBV-H4 was transiently expressed in nonparasitized host at late larval stage and subjected to ChIP-Seq. Two kinds of ChIP-Seqs shared 51 core joining sites. Common targets were close (within 1 kb to genes regulated at expression levels by CpBV-H4. However, other host genes not close to CpBV-H4 joining sites were also regulated by CpBV-H4. These results indicate that CpBV-H4 joins specific chromatin regions of P. xylostella and controls about one sixth of the total host genes that were regulated by C. plutellae parasitism in an epigenetic mode.

Methylation profiling in individuals with Russell-Silver syndrome.

Science.gov (United States)

Peñaherrera, Maria S; Weindler, Susanne; Van Allen, Margot I; Yong, Siu-Li; Metzger, Daniel L; McGillivray, Barbara; Boerkoel, Cornelius; Langlois, Sylvie; Robinson, Wendy P

2010-02-01

Russell-Silver syndrome (RSS) is a heterogeneous disorder associated with pre- and post-natal growth restriction and relative macrocephaly. Involvement of imprinted genes on both chromosome 7 and 11p15.5 has been reported. To further characterize the role of epimutations in RSS we evaluated the methylation status at both 11p15.5 imprinting control regions (ICRs): ICR1 associated with H19/IGF2 expression and ICR2 (KvDMR1) associated with CDKN1C expression in a series of 35 patients with RSS. We also evaluated methylation at the promoter regions of other imprinted genes involved in growth such as PLAGL1 (6q24), GCE (7q21), and PEG10 (7q21) in this series of 35 patients with RSS. Thirteen of the 35 patient samples, but none of 22 controls, showed methylation levels at ICR1 that were more than 2 SD below the mean for controls. Three RSS patients were highly methylated at the SCGE promoter, all of which were diagnosed with upd(7)mat. To identify further potential global methylation changes in RSS patients, a subset of 22 patients were evaluated at 1505 CpG sites by the Illumina GoldenGate methylation array. Among the few CpG sites displaying a significant difference between RSS patients and controls, was a CpG associated with the H19 promoter. No other sites associated with known imprinted genes were identified as abnormally methylated in RSS patients by this approach. While the association of hypomethylation of the H19/IGF2 ICR1 is clear, the continuous distribution of methylation values among the patients and controls complicates the establishment of clear cut-offs for clinical diagnosis. Copyright 2010 Wiley-Liss, Inc.

Progress in life's history: Linking Darwinism and palaeontology in Britain, 1860-1914.

Science.gov (United States)

Manias, Chris

2017-12-01

This paper examines the tension between Darwinian evolution and palaeontological research in Britain in the 1860-1914 period, looking at how three key promoters of Darwinian thinking - Thomas Henry Huxley, Edwin Ray Lankester and Alfred Russell Wallace - integrated palaeontological ideas and narratives of life's history into their public presentations of evolutionary theory. It shows how engagement with palaeontological science was an important part of the promotion of evolutionary ideas in Britain, which often bolstered notions that evolution depended upon progress and development along a wider plan. While often critical of some of the non-Darwinian concepts of evolution professed by many contemporary palaeontologists, and frequently citing the 'imperfection' of the fossil record itself, Darwinian thinkers nevertheless engaged extensively with palaeontology to develop evolutionary narratives informed by notions of improvement and progress within the natural world. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Performance of two liquids scintillation and optimization of a Wallac 1411 counter in the tritium quantification in aqueous samples; Desempeno de dos centelleadores liquidos y optimizacion de un contador Wallac 1411 en la cuantificacion de tritio en muestras acuosas

Energy Technology Data Exchange (ETDEWEB)

Contreras de la Cruz, E. de J.; Lopez del Rio, H.; Davila R, J. I.; Mireles G, F.; Pinedo V, J. L., E-mail: hlopezdelrio@hotmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas (Mexico)

2014-10-15

The optimization of a liquid scintillation counting Wallac 1411 is presented as well as the performance of the liquids scintillation miscible in water OptiPhase Hi Safe 3 and Last Gold Ab, in the tritium quantification in aqueous samples. The luminescence effect, the quenching, the solution ph and the level of pulse amplitude comparator (Pac) were evaluated in the response of both liquids scintillation in the tritium measurement. The quenching and the luminescence modify the scintillators response; in the first of them the counting efficiency decreases and the minimum detectable activity increases; the second interferes in the tritium quantification in the interest window, but the effect disappears after 4 hours of darkness of the samples. The maximum counting efficiency was of 24% for OptiPhase Hi Safe 3 and 31% for Last Gold Ab, diminishing with the quenching until values of 8 and 11%, respectively. For a counting time of 6 hours and lower quenching, the minimum detectable concentration for OptiPhase Hi Safe 3 was of 13.4 ± 0.2 Bq/L and 9.9 ± 0.1 Bq/L for Last Gold Ab. Both scintillators responded appropriately to sour and basic solutions, being only presented chemiluminescence in Last Gold Ab to ph highly basic. The Pac application that varies between 1 and 256 does not have effect in the tritium measurement until values above 90. (Author)

Influence of Hub Parameters on Joining Forces and Torque Transmission Output of Plastically-Joined Shaft-Hub-Connections with a Knurled Contact Surface

Directory of Open Access Journals (Sweden)

Lukáš Suchý

2018-04-01

Full Text Available A knurled interference fit is a machine part connection made by a plastic joining, which includes the advantages of commonly-used shaft-hub-connections. The combination of the friction and form fit, which are responsible for torque transmission, results in a higher power density than conventional connections. In this paper, parameter gaps are bridged with the aim of enhance the design calculation of the knurled interference fit. Experimental investigations on the shaft chamfer angle (100Cr6 and hub-diameter-ratio (AlSi1MgMn were performed. The analytical approaches are developed for calculating the joining force and maximal torque capacity by accounting for experimentally investigated loss of load transmission at high hub-diameter-ratios and high shaft chamfer angles. The presented calculation approach is an accurate tool for the assessment of early machine designs of the knurled interference fit and helps to save from having to perform time-extensive tests.

Joining-Splitting Interaction of Noncritical String

Science.gov (United States)

Hadasz, Leszek; Jaskólski, Zbigniew

The joining-splitting interaction of noncritical bosonic string is analyzed in the light-cone formulation. The Mandelstam method of constructing tree string amplitudes is extended to the bosonic massive string models of the discrete series. The general properties of the Liouville longitudinal excitations which are necessary and sufficient for the Lorentz covariance of the light-cone amplitudes are derived. The results suggest that the covariant and the light-cone approach are equivalent also in the noncritical dimensions. Some aspects of unitarity of interacting noncritical massive string theory are discussed.

Cores, Joins and the Fano-Flow Conjectures

Directory of Open Access Journals (Sweden)

Jin Ligang

2018-02-01

Full Text Available The Fan-Raspaud Conjecture states that every bridgeless cubic graph has three 1-factors with empty intersection. A weaker one than this conjecture is that every bridgeless cubic graph has two 1-factors and one join with empty intersection. Both of these two conjectures can be related to conjectures on Fano-flows. In this paper, we show that these two conjectures are equivalent to some statements on cores and weak cores of a bridgeless cubic graph. In particular, we prove that the Fan-Raspaud Conjecture is equivalent to a conjecture proposed in [E. Steffen, 1-factor and cycle covers of cubic graphs, J. Graph Theory 78 (2015 195–206]. Furthermore, we disprove a conjecture proposed in [G. Mazzuoccolo, New conjectures on perfect matchings in cubic graphs, Electron. Notes Discrete Math. 40 (2013 235–238] and we propose a new version of it under a stronger connectivity assumption. The weak oddness of a cubic graph G is the minimum number of odd components (i.e., with an odd number of vertices in the complement of a join of G. We obtain an upper bound of weak oddness in terms of weak cores, and thus an upper bound of oddness in terms of cores as a by-product.

Laser beam joining of non-oxidic ceramics for ultra high temperature resistant joints

International Nuclear Information System (INIS)

Lippmann, W.; Knorr, J.; Wolf, R.; Reinecke, A.M.; Rasper, R.

2004-01-01

The excellent technical properties of silicon carbide (SiC) and silicon nitride (Si 3 N 4 ) ceramics, such as resistance to extreme temperatures, oxidation, mechanical wear, aggressive chemical substances and radioactive radiation and also its high thermal conductivity and good temperature-shock resistance, make these ceramics ideally suited for use in the field of nuclear technology. However, their practical use has been limited so far because of the unavailability of effective joining techniques for these ceramics, especially for high temperature applications. A new joining technology (CERALINK registered ) has been developed in a network project which allowed high temperature resistant and vacuum-tight joining of SiC or Si 3 N 4 ceramics. A power laser is used as heat source, which makes it possible to join ceramic components in free atmosphere in combination with a pure oxidic braze filler. As no furnace is necessary, there are no limitations on the component dimensions by the furnace-geometry. During the joining process, the heated area can be limited to the seam area so that this technology can also be used to encapsulate materials with a low melting point. The seam has a high mechanical strength, it is resistant to a wide range of chemicals and radiation and it is also vacuum-tight. The temperature resistance can be varied by variation of the braze filler composition - usually between 1,400 C and >1,600 C. Beside the optimum filler it is also important to select the suitable laser wavelength. The paper will demonstrate the influence of different wave lengths, i. e. various laser types, on the seam quality. Examples are chosen to illustrate the strengths and limitations of the new technology

Frequency of joined disabilities of children with cerebral palsy in Tuzla canton

Directory of Open Access Journals (Sweden)

Mirela Babajić

2013-12-01

Full Text Available Introduction: Cerebral palsy (CP connotes a group of non-progressive, but often variable symptoms of motor impairment of movement and posture, as well as other impairments which are a consequenceof anomalies or brain impairment in different phases of its development. CP is a pathological condition characterised in the fi rst place by motor function impairment to which other disorders such as: visual andhearing impairment, intellectual defi cit, emotional problems, behaviour disorder, speech disorder, epileptic seizure and similar can join. The aim of this study is to determine frequency of joined disabilities ofchildren with cerebral palsy in Tuzla Canton.Methods: The research covers a total sample of 48 examinees, chronological age from 2-19 years, in Tuzla Canton. Research instrument was a Structural Questionnaire for the parents of children and adolescentswith cerebral palsy. Research data were processed by nonparametric statistics method. Basic statistical parameters of frequency and percentages were calculated, and tabular presentation was made.Results: After classification of examinees as per frequency of joined disabilities was done, work results have shown that speech impairment occurred with 35.4 % of children, visual impairment 33.3 %, epilepsy29.3 %, whereas hearing impairment occurred with 2 % of children.Conclusion: In research of frequency of joined disabilities of children with cerebral palsy in Tuzla Canton, most expressed are speech and visual disorders with children, then epilepsy, whereas a small percentageof children are with hearing disorder.

Joining SiC/SiC composites for fusion applications

International Nuclear Information System (INIS)

Henager, C.J.

2007-01-01

Full text of publication follows: The use of SiC-reinforced composites for fusion reactors or other nuclear applications will likely require some form of joining in order to form large structural or functional sections. Joints must be able to allow load transfer to the composite material so that the fiber reinforcements are able to carry their designed loads and the joint should not fail in a brittle manner. In addition, joints must be tolerant of radiation damage similar to the composite material to maintain the structural integrity of the joined section. Other requirements of interest are low activation joints and ease of joining application and processing, which are a difficult set of criteria to meet. Research at PNNL has been directed at high-strength joints using solid-state displacement reactions and pre-ceramic polymer joints that are easy to apply and that could be used in field repair situations. This research will report on the further development and testing of such joints using a double notch shear (DNS) specimen that is suitable for in-reactor testing. The results reveal that the solid-state joints are stronger than the polymer-based joints but require high-temperature, high-pressure processing. The polymer-based joints can be applied with reduced pressure and temperature processing compared to the solid-state joints. The polymer-based joints may have adequate strength for some applications where ease of application and in situ processing are required. Although irradiation testing is not reported in this study the use of the DNS specimen is discussed with regard to future neutron irradiations. (authors)

Study on the Joining Strength of Spot Welding using POMISPOT Device

International Nuclear Information System (INIS)

Mohd Azhar Ahmad; Siti Aiasah Hashim; Mohd Rizal Chulan

2015-01-01

Welding is a process to join metals. Spot welding is commonly used for specific purposes such joining in small areas or making temporary joints. POMISPOT is a spot welder that was designed and built by the ADC group, using capacitive resistance method. This study was made to obtain the welding strength that can be made by this spot welder. The study used stainless steel pieces of different thickness and by varying the applied voltage. The strength of welded pieces is tested by applying loads. The relationship between the thickness, voltage and welding strength will be used as the basis of specifications of this tool. (author)

Activities of HIP joining of plasma-facing armors in the blanket first-wall in Korea

Energy Technology Data Exchange (ETDEWEB)

Jung, Yang-Il, E-mail: yijung@kaeri.re.kr [Korea Atomic Energy Research Institute, Daedeok-daero, Daejeon 34057 (Korea, Republic of); Park, Jeong-Yong; Choi, Byoung-Kwon; Lee, Jung-Suk; Kim, Hyun-Gil; Park, Dong-Jun; Park, Jung-Hwan; Kim, Suk-Kwon; Lee, Dong-Won [Korea Atomic Energy Research Institute, Daedeok-daero, Daejeon 34057 (Korea, Republic of); Cho, Seungyon [National Fusion Research Institute, Gwahak-ro, Yuseong, Daejeon 34133 (Korea, Republic of)

2016-11-01

Highlights: • HIP joints of Be/CuCrZr, Be/FMS, W/FMS were demonstrated. • The process conditions for HIP joining were developed. • For the joining of Be, coating interlayers as well as thick diffusion barrier was developed. • For the joining of W, double-staged HIP was applied for the joint integrity. • No significant defects nor a brittle failure were observed along the joint interface. - Abstract: Joining technology for dissimilar materials was developed for the fabrication of an ITER blanket first-wall, which consisted of Be, CuCrZr, and stainless steel (SS). The Be/CuCrZr/SS joint was fabricated using a hot isostatic pressing (HIP) method. Beryllium armor was joined to the CuCrZr/SS block at 580 °C under 100 MPa. The optimal interlayer coatings of Cr/Cu and Ti/Cr/Cu were developed using an ion-beam assisted physical vapor deposition. Beryllium is also a candidate armor material for the TBM first-wall. Successful joining of Be to ferritic-martensitic steel (FMS) was accomplished using an HIP method by introducing the thick diffusion barrier. A thick diffusion barrier of a Cu foil(10 μm) limited the excessive diffusion and prevented the formation of brittle phases at the Be/FMS interface. Be and FMS were bonded at 650–850 °C; however, a temperature of lower than 750 °C was recommended to avoid material degradation of FMS. In addition, the joining of W to FMS has been developed. Tungsten is another armor material applicable to more severe plasma conditions. The large difference in the thermal expansion between W and FMS was resolved by introducing the Ti interlayer and Mo separator. Moreover, the double-staged HIP (the first stage at 900 °C and 100 MPa and the second stage at 750 °C and 70 MPa) was applied to suppress the edge delamination of W/FMS joints during thermal history.

Population Pharmacokinetics of an Indian F(ab'2 Snake Antivenom in Patients with Russell's Viper (Daboia russelii Bites.

Directory of Open Access Journals (Sweden)

Geoffrey K Isbister

Full Text Available There is limited information on antivenom pharmacokinetics. This study aimed to investigate the pharmacokinetics of an Indian snake antivenom in humans with Russell's viper bites.Patient data and serial blood samples were collected from patients with Russell's viper (Daboia russelii envenoming in Sri Lanka. All patients received Indian F(ab'2 snake antivenom manufactured by VINS Bioproducts Ltd. Antivenom concentrations were measured with sandwich enzyme immunoassays. Timed antivenom concentrations were analysed using MONOLIXvs4.2. One, two and three compartment models with zero order input and first order elimination kinetics were assessed. Models were parameterized with clearance (CL, intercompartmental clearance (Q, central compartment volume (V and peripheral compartment volume (VP. Between-subject-variability (BSV on relative bioavailability (F was included to account for dose variations. Covariates effects (age, sex, weight, antivenom batch, pre-antivenom concentrations were explored by visual inspection and in model building. There were 75 patients, median age 57 years (40-70 y and 64 (85% were male. 411 antivenom concentration data points were analysed. A two compartment model with zero order input, linear elimination kinetics and a combined error model best described the data. Inclusion of BSV on F and weight as a covariate on V improved the model. Inclusion of pre-antivenom concentrations or different batches on BSV of F did not. Final model parameter estimates were CL,0.078 L h(-1, V,2.2L, Q,0.178 L h(-1 and VP,8.33L. The median half-life of distribution was 4.6 h (10-90%iles:2.6-7.1 h and half-life of elimination, 140 h (10th-90th percentilesx:95-223h.Indian F(ab'2 snake antivenom displayed biexponential disposition pharmacokinetics, with a rapid distribution half-life and more prolonged elimination half-life.

Performance Comparison of the Optimized Inverted Joined Wing Airplane Concept and Classical Configuration Airplanes

Directory of Open Access Journals (Sweden)

Sieradzki Adam

2016-09-01

Full Text Available The joined wing concept is an unconventional airplane configuration, known since the mid-twenties of the last century. It has several possible advantages, like reduction of the induced drag and weight due to the closed wing concept. The inverted joined wing variant is its rarely considered version, with the front wing being situated above the aft wing. The following paper presents a performance prediction of the recently optimized configuration of this airplane. Flight characteristics obtained numerically were compared with the performance of two classical configuration airplanes of similar category. Their computational fluid dynamics (CFD models were created basing on available documentation, photographs and some inverse engineering methods. The analysis included simulations performed for a scale of 3-meter wingspan inverted joined wing demonstrator and also for real-scale manned airplanes. Therefore, the results of CFD calculations allowed us to assess the competitiveness of the presented concept, as compared to the most technologically advanced airplanes designed and manufactured to date. At the end of the paper, the areas where the inverted joined wing is better than conventional airplane were predicted and new research possibilities were described.

Joining technology—A challenge for the use of SiC components in HTRs

Energy Technology Data Exchange (ETDEWEB)

Herrmann, M., E-mail: marion.herrmann@tu-dresden.de; Meisel, P.; Lippmann, W.; Hurtado, A.

2016-09-15

The availability of suitable joining technologies is paramount to the further advancement of ceramic components and their use in HTRs. Among other joining technologies, a modified brazing technology using a laser beam for heating the components to be joined has been developed at TU Dresden. The laser-induced heating behavior of the ceramic material is determined by the interactions between the material and the laser beam. This was shown in two different silicon carbide materials (SSiC and SiC{sub f}-reinforced ceramic material) using a diode laser with wavelengths 808 nm and 940 nm. The laser-based technique was illustrated by three different examples: sealing of monolithic SiC with a pin configuration for fuel claddings, sealing of SiC heat pipes with a length of 1 m, and demonstration of the transferability of the laser technique to fiber-reinforced components by means of a SiC{sub f}/SiCN material. Because the covalent bonding of SiC does not allow conventional welding, much research has been devoted to developing alternative filler systems. Glass or glass–ceramic fillers enable the tailoring of properties such as CTE and viscosity. Glasses are thermally stable up to their glass transition temperatures. It was shown that the crystallization of the yttrium aluminosilicate glass composition of the present work allows it to be used at 1050 °C without any significant changes occurring in braze tightness. For the SiC heat pipes with sodium as the working fluid, a sodium-resistant metal braze consisting of Ni–Ti–Si was formed. The long-term resistance of this filler to sodium at 800 °C was proven. The results demonstrate the possibility of using the laser-based joining technique for the joining of different SiC materials as well as for different brazing materials.

Laser direct joining of metal and plastic

International Nuclear Information System (INIS)

Katayama, Seiji; Kawahito, Yousuke

2008-01-01

We have developed an innovative rapid laser direct joining process of metal and plastic lap plates without adhesives or glues. The joints made between a Type 304 stainless steel plate and a polyethylene terephthalate (PET) plastic sheet of 30 mm width possessed tensile shear loads of about 3000 N. Transmission electron microscope photographs of the joint demonstrated that Type 304 and the PET were bonded on the atomic, molecular or nanostructural level through a Cr oxide film

Summary of Prior Work on Joining of Oxide Dispersion-Strengthened Alloys

Energy Technology Data Exchange (ETDEWEB)

Wright, Ian G [ORNL; Tatlock, Gordon J [ORNL; Badairy, H. [University of Liverpool; Chen, C-L. [University of Liverpool

2009-08-01

There is a range of joining techniques available for use with ODS alloys, but care should be exercised in matching the technique to the final duty requirements of the joint. The goal for joining ODS alloys is a joint with no local disruption of the distribution of the oxide dispersion, and no significant change in the size and orientation of the alloy microstructure. Not surprisingly, the fusion welding processes typically employed with wrought alloys produce the least satisfactory results with ODS alloys, but some versions, such as fusion spot welding, and the laser and electron-beam welding technologies, have demonstrated potential for producing sound joints. Welds made using solid-state spot welding reportedly have exhibited parent metal properties. Thus, it is possible to employ processes that result in significant disruption of the alloy microstructure, as long as the processing parameters are adjustment to minimize the extent of or influence of the changes in the alloy microstructure. Selection among these joining approaches largely depends on the particular application and component configuration, and an understanding of the relationships among processing, alloy microstructure, and final properties is key. Recent developments have resulted in friction welding evolving to be a prime method for joining ODS sheet products, and variants of brazing/diffusion bonding have shown excellent promise for use with tubes and pipes. The techniques that come closest to the goal defined above involve solid-state diffusion bonding and, in particular, it has been found that secondary recrystallization of joints made by pulsed plasma-assisted diffusion can produce the desired, continuous, large alloy grain structure through the joint. Such joints have exhibited creep rupture failure at >82% of the load needed to fail the monolithic parent alloy at 1000 C.

Use of Friction Stir Welding and Friction Stir Processing for Advanced Nuclear Fuels and Materials Joining Applications

International Nuclear Information System (INIS)

J. I. Cole; J. F. Jue

2006-01-01

Application of the latest developments in materials technology may greatly aid in the successful pursuit of next generation reactor and transmutation technologies. One such area where significant progress is needed is joining of advanced fuels and materials. Rotary friction welding, also referred to as friction stir welding (FSW), has shown great promise as a method for joining traditionally difficult to join materials such as aluminum alloys. This relatively new technology, first developed in 1991, has more recently been applied to higher melting temperature alloys such as steels, nickel-based and titanium alloys. An overview of the FSW technology is provided and two specific nuclear fuels and materials applications where the technique may be used to overcome limitations of conventional joining technologies are highlighted

Retrieval of Spatial Join Pattern Instances from Sensor Networks

DEFF Research Database (Denmark)

Yiu, Man Lung; Mamoulis, Nikos; Bakiras, Spiridon

2009-01-01

We study the continuous evaluation of spatial join queries and extensions thereof, defined by interesting combinations of sensor readings (events) that co-occur in a spatial neighborhood. An example of such a pattern is "a high temperature reading in the vicinity of at least four high-pressure re...

Joining of SiC ceramics and SiC/SiC composites

Energy Technology Data Exchange (ETDEWEB)

Rabin, B.H. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

1996-08-01

This project has successfully developed a practical and reliable method for fabricating SiC ceramic-ceramic joints. This joining method will permit the use of SiC-based ceramics in a variety of elevated temperature fossil energy applications. The technique is based on a reaction bonding approach that provides joint interlayers compatible with SiC, and excellent joint mechanical properties at temperatures exceeding 1000{degrees}C. Recent emphasis has been given to technology transfer activities, and several collaborative research efforts are in progress. Investigations are focusing on applying the joining method to sintered {alpha}-SiC and fiber-reinforced SiC/SiC composites for use in applications such as heat exchangers, radiant burners and gas turbine components.

Georneys joins AGU's blog network

Science.gov (United States)

Viñas, Maria-José

2011-07-01

A blog on geological musings, wanderings, and adventures, called Georneys, has joined AGU's network of Earth and space science blogs. With the addition of Georneys, on 11 July, the AGU Blogosphere (http://blogs.agu.org), as the network is known, has grown to showcase eight independent blogs since its launch last fall. “One reason I write this blog is to maintain my sanity as I finish up my Ph.D. In the midst of much stress, long days in lab, and long nights writing thesis chapters, I write to remind myself of why I love geology,” says Georneys blogger Evelyn Mervine. “I also write to document some of my geological adventures and to share my love of geology with others.”

Using and joining a franchised private sector provider network in Myanmar.

Science.gov (United States)

O'Connell, Kathryn; Hom, Mo; Aung, Tin; Theuss, Marc; Huntington, Dale

2011-01-01

Quality is central to understanding provider motivations to join and remain within a social franchising network. Quality also appears as a key issue from the client's perspective, and may influence why a client chooses to use a franchised provider over another type of provider. The dynamic relationships between providers of social franchising clinics and clients who use these services have not been thoroughly investigated in the context of Myanmar, which has an established social franchising network. This study examines client motivations to use a Sun Quality Health network provider and provider motivations to join and remain in the Sun Quality Health network. Taken together, these two aims provide an opportunity to explore the symbiotic relationship between client satisfaction and provider incentives to increase the utilization of reproductive health care services. Results from a series of focus group discussions with clients of reproductive health services and franchised providers shows that women chose health services provided by franchised private sector general practitioners because of its perceived higher quality, associated with the availability of effective, affordable, drugs. A key finding of the study is associated with providers. Provider focus group discussions indicate that a principle determinate for joining and remaining in the Sun Quality Health Network was serving the poor.

Joining and Performance of Alkali Metal Thermal-to-electric Converter (AMTEC)

Energy Technology Data Exchange (ETDEWEB)

Suh, Min-Soo; Lee, Wook-Hyun; Woo, Sang-Kuk [Korea Institute of Energy Research, Daejeon (Korea, Republic of)

2017-07-15

The alkali-Metal Thermal-to-electric Converter (AMTEC) is one of the promising static energy conversion technologies for the direct conversion of thermal energy to electrical energy. The advantages over a conventional energy converter are its high theoretical conversion efficiency of 40% and power density of 500 W/kg. The working principle of an AMTEC battery is the electrochemical reaction of the sodium through an ion conducting electrolyte. Sodium ion pass through the hot side of the beta”-alumina solid electrolyte (BASE) primarily as a result of the pressure difference. This pressure difference across the BASE has a significant effect on the overall performance of the AMTEC system. In order to build the high pressure difference across the BASE, hermeticity is required for each joined components for high temperature range of 900°C. The AMTEC battery was manufactured by utilizing robust joining technology of BASE/insulator/metal flange interfaces of the system for both structural and electrical stability. The electrical potential difference between the anode and cathode sides, where the electrons emitted from sodium ionization and recombined into sodium, was characterized as the open-circuit voltage. The efforts of technological improvement were concentrated on a high-power output and conversion efficiency. This paper discusses about the joining and performance of the AMTEC systems.

Using and joining a franchised private sector provider network in Myanmar.

Directory of Open Access Journals (Sweden)

Kathryn O'Connell

Full Text Available BACKGROUND: Quality is central to understanding provider motivations to join and remain within a social franchising network. Quality also appears as a key issue from the client's perspective, and may influence why a client chooses to use a franchised provider over another type of provider. The dynamic relationships between providers of social franchising clinics and clients who use these services have not been thoroughly investigated in the context of Myanmar, which has an established social franchising network. This study examines client motivations to use a Sun Quality Health network provider and provider motivations to join and remain in the Sun Quality Health network. Taken together, these two aims provide an opportunity to explore the symbiotic relationship between client satisfaction and provider incentives to increase the utilization of reproductive health care services. METHODS AND FINDINGS: Results from a series of focus group discussions with clients of reproductive health services and franchised providers shows that women chose health services provided by franchised private sector general practitioners because of its perceived higher quality, associated with the availability of effective, affordable, drugs. A key finding of the study is associated with providers. Provider focus group discussions indicate that a principle determinate for joining and remaining in the Sun Quality Health Network was serving the poor.

Using and Joining a Franchised Private Sector Provider Network in Myanmar

Science.gov (United States)

O'Connell, Kathryn; Hom, Mo; Aung, Tin; Theuss, Marc; Huntington, Dale

2011-01-01

Background Quality is central to understanding provider motivations to join and remain within a social franchising network. Quality also appears as a key issue from the client's perspective, and may influence why a client chooses to use a franchised provider over another type of provider. The dynamic relationships between providers of social franchising clinics and clients who use these services have not been thoroughly investigated in the context of Myanmar, which has an established social franchising network. This study examines client motivations to use a Sun Quality Health network provider and provider motivations to join and remain in the Sun Quality Health network. Taken together, these two aims provide an opportunity to explore the symbiotic relationship between client satisfaction and provider incentives to increase the utilization of reproductive health care services. Methods and Findings Results from a series of focus group discussions with clients of reproductive health services and franchised providers shows that women chose health services provided by franchised private sector general practitioners because of its perceived higher quality, associated with the availability of effective, affordable, drugs. A key finding of the study is associated with providers. Provider focus group discussions indicate that a principle determinate for joining and remaining in the Sun Quality Health Network was serving the poor. PMID:22180781

Smells familiar: group-joining decisions of predatory mites are mediated by olfactory cues of social familiarity.

Science.gov (United States)

Muleta, Muluken G; Schausberger, Peter

2013-09-01

Group-living animals frequently have to trade off the costs and benefits of leaving an established group and joining another group. Owing to their high fitness relevance, group-joining decisions are commonly nonrandom and may be based on traits of both individual members and the group such as life stage, body size, social status and group density or size, respectively. Many group-living animals are able to recognize and to associate preferentially with familiar individuals, i.e. those encountered before. Hence, after dispersing from established groups, animals commonly have to decide whether to join a new familiar or unfamiliar group. Using binary choice situations we assessed the effects of social familiarity on group-joining behaviour of the plant-inhabiting predatory mite Phytoseiulus persimilis . Group living in P. persimilis is brought about by the patchy distribution of its spider mite prey and mutual conspecific attraction. In the first experiment, gravid predator females given a choice between spider mite patches occupied by unfamiliar and familiar groups of females strongly preferred to join familiar groups and to deposit their eggs in these patches. Preference for socially familiar groups was robust across biases of spider mite prey densities between choice options. The second experiment revealed that the predatory mite females can smell social familiarity from a distance. Females subjected to odour choice situations in artificial cages were more strongly attracted to the odour of familiar than unfamiliar groups. We argue that P. persimilis females preferentially join socially familiar groups because a familiar social environment relaxes competition and optimizes foraging and reproduction.

Smells familiar: group-joining decisions of predatory mites are mediated by olfactory cues of social familiarity☆

Science.gov (United States)

Muleta, Muluken G.; Schausberger, Peter

2013-01-01

Group-living animals frequently have to trade off the costs and benefits of leaving an established group and joining another group. Owing to their high fitness relevance, group-joining decisions are commonly nonrandom and may be based on traits of both individual members and the group such as life stage, body size, social status and group density or size, respectively. Many group-living animals are able to recognize and to associate preferentially with familiar individuals, i.e. those encountered before. Hence, after dispersing from established groups, animals commonly have to decide whether to join a new familiar or unfamiliar group. Using binary choice situations we assessed the effects of social familiarity on group-joining behaviour of the plant-inhabiting predatory mite Phytoseiulus persimilis. Group living in P. persimilis is brought about by the patchy distribution of its spider mite prey and mutual conspecific attraction. In the first experiment, gravid predator females given a choice between spider mite patches occupied by unfamiliar and familiar groups of females strongly preferred to join familiar groups and to deposit their eggs in these patches. Preference for socially familiar groups was robust across biases of spider mite prey densities between choice options. The second experiment revealed that the predatory mite females can smell social familiarity from a distance. Females subjected to odour choice situations in artificial cages were more strongly attracted to the odour of familiar than unfamiliar groups. We argue that P. persimilis females preferentially join socially familiar groups because a familiar social environment relaxes competition and optimizes foraging and reproduction. PMID:24027341

Influence of friction stir welding parameters on titanium-aluminum heterogeneous lap joining configuration

Science.gov (United States)

Picot, Florent; Gueydan, Antoine; Hug, Éric

2017-10-01

Lap joining configuration for Friction Stir Welding process is a methodology mostly dedicated to heterogeneous bonding. This welding technology was applied to join pure titanium with pure aluminum by varying the rotation speed and the movement speed of the tool. Regardless of the process parameters, it was found that the maximum strength of the junction remains almost constant. Microstructural observations by means of Scanning Electron Microscopy and Energy Dispersive Spectrometry analysis enable to describe the interfacial join and reveal asymmetric Cold Lap Defects on the sides of the junction. Chemical analysis shows the presence of one exclusive intermetallic compound through the interface identified as TiAl3. This compound is responsible of the crack spreading of the junction during the mechanical loading. The original version of this article supplied to AIP Publishing contained an accidental inversion of the authors, names. An updated version of this article, with the authors names formatted correctly was published on 20 October 2017.

Diagnosis and management of Silver-Russell syndrome: first international consensus statement.

Science.gov (United States)

Wakeling, Emma L; Brioude, Frédéric; Lokulo-Sodipe, Oluwakemi; O'Connell, Susan M; Salem, Jennifer; Bliek, Jet; Canton, Ana P M; Chrzanowska, Krystyna H; Davies, Justin H; Dias, Renuka P; Dubern, Béatrice; Elbracht, Miriam; Giabicani, Eloise; Grimberg, Adda; Grønskov, Karen; Hokken-Koelega, Anita C S; Jorge, Alexander A; Kagami, Masayo; Linglart, Agnes; Maghnie, Mohamad; Mohnike, Klaus; Monk, David; Moore, Gudrun E; Murray, Philip G; Ogata, Tsutomu; Petit, Isabelle Oliver; Russo, Silvia; Said, Edith; Toumba, Meropi; Tümer, Zeynep; Binder, Gerhard; Eggermann, Thomas; Harbison, Madeleine D; Temple, I Karen; Mackay, Deborah J G; Netchine, Irène

2017-02-01

This Consensus Statement summarizes recommendations for clinical diagnosis, investigation and management of patients with Silver-Russell syndrome (SRS), an imprinting disorder that causes prenatal and postnatal growth retardation. Considerable overlap exists between the care of individuals born small for gestational age and those with SRS. However, many specific management issues exist and evidence from controlled trials remains limited. SRS is primarily a clinical diagnosis; however, molecular testing enables confirmation of the clinical diagnosis and defines the subtype. A 'normal' result from a molecular test does not exclude the diagnosis of SRS. The management of children with SRS requires an experienced, multidisciplinary approach. Specific issues include growth failure, severe feeding difficulties, gastrointestinal problems, hypoglycaemia, body asymmetry, scoliosis, motor and speech delay and psychosocial challenges. An early emphasis on adequate nutritional status is important, with awareness that rapid postnatal weight gain might lead to subsequent increased risk of metabolic disorders. The benefits of treating patients with SRS with growth hormone include improved body composition, motor development and appetite, reduced risk of hypoglycaemia and increased height. Clinicians should be aware of possible premature adrenarche, fairly early and rapid central puberty and insulin resistance. Treatment with gonadotropin-releasing hormone analogues can delay progression of central puberty and preserve adult height potential. Long-term follow up is essential to determine the natural history and optimal management in adulthood.

Optimizing main-memory join on modern hardware

OpenAIRE

Boncz, Peter; Manegold, Stefan; Kersten, Martin

2002-01-01

textabstractIn the past decade, the exponential growth in commodity CPUs speed has far outpaced advances in memory latency. A second trend is that CPU performance advances are not only brought by increased clock rate, but also by increasing parallelism inside the CPU. Current database systems have not yet adapted to these trends, and show poor utilization of both CPU and memory resources on current hardware. In this article, we show how these resources can be optimized for large joins and tra...

Comparative analysis of different joining techniques to improve the passive fit of cobalt-chromium superstructures.

Science.gov (United States)

Barbi, Francisco C L; Camarini, Edevaldo T; Silva, Rafael S; Endo, Eliana H; Pereira, Jefferson R

2012-12-01

The influence of different joining techniques on passive fit at the interface structure/abutment of cobalt-chromium (Co-Cr) superstructures has not yet been clearly established. The purpose of this study was to compare 3 different techniques of joining Co-Cr superstructures by measuring the resulting marginal misfit in a simulated prosthetic assembly. A specially designed metal model was used for casting, sectioning, joining, and measuring marginal misfit. Forty-five cast bar-type superstructures were fabricated in a Co-Cr alloy and randomly assigned by drawing lots to 3 groups (n=15) according to the joining method used: conventional gas-torch brazing (G-TB), laser welding (LW), and tungsten inert gas welding (TIG). Joined specimens were assembled onto abutment analogs in the metal model with the 1-screw method. The resulting marginal misfit was measured with scanning electron microscopy (SEM) at 3 different points: distal (D), central (C), and mesial (M) along the buccal aspect of both abutments: A (tightened) and B (without screw). The Levene test was used to evaluate variance homogeneity and then the Welsch ANOVA for heteroscedastic data (α=.05). Significant differences were found on abutment A between groups G-TB and LW (P=.013) measured mesially and between groups G-TB and TIG (P=.037) measured centrally. On abutment B, significant differences were found between groups G-TB and LW (Plaser method. Copyright © 2012 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Turbo Charge CPU Utilization in Fork/Join Using the ManagedBlocker

CERN Multimedia

CERN. Geneva

2017-01-01

Fork/Join is a framework for parallelizing calculations using recursive decomposition, also called divide and conquer. These algorithms occasionally end up duplicating work, especially at the beginning of the run. We can reduce wasted CPU cycles by implementing a reserved caching scheme. Before a task starts its calculation, it tries to reserve an entry in the shared map. If it is successful, it immediately begins. If not, it blocks until the other thread has finished its calculation. Unfortunately this might result in a significant number of blocked threads, decreasing CPU utilization. In this talk we will demonstrate this issue and offer a solution in the form of the ManagedBlocker. Combined with the Fork/Join, it can keep parallelism at the desired level.

Performance Comparison of the Optimized Inverted Joined Wing Airplane Concept and Classical Configuration Airplanes

OpenAIRE

Sieradzki Adam; Dziubiński Adam; Galiński Cezary

2016-01-01

The joined wing concept is an unconventional airplane configuration, known since the mid-twenties of the last century. It has several possible advantages, like reduction of the induced drag and weight due to the closed wing concept. The inverted joined wing variant is its rarely considered version, with the front wing being situated above the aft wing. The following paper presents a performance prediction of the recently optimized configuration of this airplane. Flight characteristics obtaine...

Sindrome de russel tumor diencefálico em uma criança

Directory of Open Access Journals (Sweden)

Luiz A. C. Roxo da Motta

1990-03-01

Full Text Available Apresenta-se o caso de criança do sexo masculino com síndrome de Russel devida a astrocitoma pilocítico localizado na região diencefálica. O diagnóstico foi realizado aos 16 meses de idade, mas sua sintomatologia se iniciou aos 4 meses, com emagrecimento progressivo. À internação apresentava-se com peso de 6150g e 74cm de estatura, emaciada, sem panículo adiposo, irritadica e com sinais de hipertensão intracraniana. Existia estrabismo convergente, nistagmo vertical do olho esquerdo e papiledema bilateral. Os reflexos tendinosos eram exaltados e tinha tetraparesia espástica. A avaliação endócrina demonstrou aumento basal do GH (23 ng/ml, do TSH (6,2 mUI/l e da prolactina (26 ng/ml. Os dois primeiros hormônios não responderam ao teste agudo com o TRH, enquanto a prolactina teve resposta pobre. Foi submetida a radioterapia com acelerador linear (dose total de 4000 rads e a cirurgia, na qual não se conseguiu extirpar todo o tumor, devido a seu tamanho. Nove meses após, a criança encontra-se bem, com apreciável ganho ponderai (2500g.

Design of Helical Self-Piercing Rivet for Joining Aluminum Alloy and High-Strength Steel Sheets

International Nuclear Information System (INIS)

Kim, W. Y.; Kim, D. B.; Park, J. G; Kim, D. H.; Kim, K. H.; Lee, I. H.; Cho, H. Y.

2014-01-01

A self-piercing rivet (SPR) is a mechanical component for joining dissimilar material sheets such as those of aluminum alloy and steel. Unlike conventional rivets, the SPR directly pierces sheets without the need for drilling them beforehand. However, the regular SPR can undergo buckling when it pierces a high-strength steel sheet, warranting the design of a helical SPR. In this study, the joining and forging processes using the helical SPR were simulated using the commercial FEM code, DEFORM-3D. High-tensile-strength steel sheets of different strengths were joined with aluminum alloy sheets using the designed helical SPR. The simulation results were found to agree with the experimental results, validating the optimal design of a helical SPR that can pierce high-strength steel sheets

Design of Helical Self-Piercing Rivet for Joining Aluminum Alloy and High-Strength Steel Sheets

Energy Technology Data Exchange (ETDEWEB)

Kim, W. Y.; Kim, D. B.; Park, J. G; Kim, D. H.; Kim, K. H.; Lee, I. H.; Cho, H. Y. [Chungbuk National University, Cheongju (Korea, Republic of)

2014-07-15

A self-piercing rivet (SPR) is a mechanical component for joining dissimilar material sheets such as those of aluminum alloy and steel. Unlike conventional rivets, the SPR directly pierces sheets without the need for drilling them beforehand. However, the regular SPR can undergo buckling when it pierces a high-strength steel sheet, warranting the design of a helical SPR. In this study, the joining and forging processes using the helical SPR were simulated using the commercial FEM code, DEFORM-3D. High-tensile-strength steel sheets of different strengths were joined with aluminum alloy sheets using the designed helical SPR. The simulation results were found to agree with the experimental results, validating the optimal design of a helical SPR that can pierce high-strength steel sheets.

POSSIBILITY OF PHARMACOMODULATION OF THE HYPERSENSITIVE RHINITIS JOINED WITH THE NASAL POLYPOSIS

Directory of Open Access Journals (Sweden)

Dejan Ursulović

2001-11-01

Full Text Available The research goai is to examine the effects of the local corticosteroidapplication to the number of eosinophils in the nasal secretion of the patients withhypersensitive rhinitis joined with the nasal polyposis. The study comprises 13patients with hypersensitive rhinitis joined with the nasal polyposis; 9 of them madeup the experimental group. The local corticosteroid (bechomethasone dipropionatein water spray was given at 12 hours in individual doses of 200 micrograms to theexperimental group patients in six weeks. During the treatment it was confirmed thatthere was a highly important reduction of the number of eosinophils of the nasalsecretion in the experimental group patients.

The mine and the furnace: Francis Bacon, Thomas Russell, and early Stuart mining culture.

Science.gov (United States)

Pastorino, Cesare

2009-01-01

Notwithstanding Francis Bacon's praise for the philosophical role of the mechanical arts, historians have often downplayed Bacon's connections with actual artisans and entrepreneurs. Addressing the specific context of mining culture, this study proposes a rather different picture. The analysis of a famous mining metaphor in The Advancement of Learning shows us how Bacon's project of reform of knowledge could find an apt correspondence in civic and entrepreneurial values of his time. Also, Bacon had interesting and so far unexplored links with the early modern English mining enterprises, like the Company of Mineral and Battery Works, ofwhich he was a shareholder. Moreover, Bacon's notes in a private notebook, Commentarius Solutus, and records of patents of invention, allow us to start grasping Bacon's connections with the metallurgist and entrepreneur Thomas Russell. Lastly, this paper argues that, to fully understand Bacon's links with the world of Stuart technicians and entrepreneurs, it is necessary to consider a different and insufficiently studied aspect of Bacon's interests, namely his work as patents referee while a Commissioner of Suits.

Feasibility of ceramic joining with high energy electron beams

International Nuclear Information System (INIS)

Turman, B.N.; Glass, S.J.; Halbleib, J.A.; Helmich, D.R.; Loehman, R.E.; Clifford, J.R.

1995-01-01

Joining structural ceramics is possible using high melting point metals such as Mo and Pt that are heated with a high energy electron beam, with the potential for producing joints with high temperature capability. A 10 MeV electron beam can penetrate through 1 cm of ceramic, offering the possibility of buried interface joining. Because of transient heating and the lower heat capacity of the metal relative to the ceramic, a pulsed high power beam has the potential for melting the metal without decomposing or melting the adjacent ceramic. The authors have demonstrated the feasibility of the process with a series of 10 MeV, 1 kW electron beam experiments. Shear strengths up to 28 NTa have been measured for Si 3 N 4 -Mo-Si 3 N 4 . These modest strengths are due to beam non-uniformity and the limited area of bonding. The bonding mechanism appears to be a thin silicide reaction layer. Si 3 N 4 -Si 3 N 4 joints with no metal layer were also produced, apparently bonded an yttrium apatite grain boundary phase

Surface plasmon resonance assisted rapid laser joining of glass

Energy Technology Data Exchange (ETDEWEB)

Zolotovskaya, Svetlana A.; Tang, Guang; Abdolvand, Amin, E-mail: a.abdolvand@dundee.ac.uk [School of Engineering, Physics and Mathematics, University of Dundee, Dundee DD1 4HN (United Kingdom); Wang, Zengbo [School of Electronic Engineering, Bangor University, Bangor LL57 1UT (United Kingdom)

2014-08-25

Rapid and strong joining of clear glass to glass containing randomly distributed embedded spherical silver nanoparticles upon nanosecond pulsed laser irradiation (∼40 ns and repetition rate of 100 kHz) at 532 nm is demonstrated. The embedded silver nanoparticles were ∼30–40 nm in diameter, contained in a thin surface layer of ∼10 μm. A joint strength of 12.5 MPa was achieved for a laser fluence of only ∼0.13 J/cm{sup 2} and scanning speed of 10 mm/s. The bonding mechanism is discussed in terms of absorption of the laser energy by nanoparticles and the transfer of the accumulated localised heat to the surrounding glass leading to the local melting and formation of a strong bond. The presented technique is scalable and overcomes a number of serious challenges for a widespread adoption of laser-assisted rapid joining of glass substrates, enabling applications in the manufacture of microelectronic devices, sensors, micro-fluidic, and medical devices.

Advanced manufacturing technologies modern machining, advanced joining, sustainable manufacturing

CERN Document Server

2017-01-01

This book provides details and collective information on working principle, process mechanism, salient features, and unique applications of various advanced manufacturing techniques and processes belong. The book is divided in three sessions covering modern machining methods, advanced repair and joining techniques and, finally, sustainable manufacturing. The latest trends and research aspects of those fields are highlighted.

Lipofection and nucleofection of substrate plasmid can generate widely different readings of DNA end-joining efficiency in different cell lines.

Science.gov (United States)

Magin, Simon; Saha, Janapriya; Wang, Minli; Mladenova, Veronika; Coym, Nadine; Iliakis, George

2013-02-01

In vivo plasmid end-joining assays are valuable tools for dissecting important qualitative and quantitative aspects of non-homologous end-joining (NHEJ)--a key mechanism for the repair of DNA double-strand breaks (DSBs) in higher eukaryotes. They enable the use of defined DNA ends as substrates for end-joining and the analysis by sequencing of the resulting junctions to identify the repair pathways engaged. Yet, plasmid assays have generated divergent results of end-joining capacity in the same DSB repair mutants when used under different conditions, which implies contributions from undefined and therefore uncontrolled parameters. To help standardize these assays, we searched for parameters underpinning these variations and identified transfection method as an important determinant. Here, we compare a lipid-based transfection method, lipofection, with an electroporation method, nucleofection, and find large, unanticipated and cell line-dependent differences in percent end-joining without recognizable trends. For example, in rodent cells, transfection using lipofection gives nearly WT end-joining in DNA-PKcs mutants and only mildly inhibited end-joining in Lig4 and Ku mutants. In contrast, transfection using nucleofection shows marked end-joining inhibition in all NHEJ mutants tested as compared to the WT. In human HCT116 cells, end-joining after nucleofection is strongly suppressed even in the WT and the differences to the mutants are small. After lipofection, in contrast, end-joining is high in WT cells and markedly suppressed in the mutants. We conclude that better understanding and control of the physicochemical/biological and analytical parameters underpinning these differences will be required to generate with plasmid assays results with quantitative power comparable to that of well-established methods of DSB analysis such as pulsed-field gel electrophoresis or γ-H2AX foci scoring. Until then, caution is needed in the interpretation of the results obtained

HIP joining of Be/CuCrZr for fabrication of ITER first wall

International Nuclear Information System (INIS)

Park, Jeong-Yong; Choi, Byung-Kwon; Park, Sang-Yoon; Kim, Hyun-Gil; Kim, Jun-Hwan; Hong, Bong Guen; Jeong, Yong Hwan

2007-01-01

The effects of different interlayer types and the temperature have been investigated in order to optimize the HIP joining conditions of Be to CuCrZr. Ti/Cu and Cr/Cu interlayers were coated onto a Be surface before a HIP joining. HIP temperature was changed from 580 to 620 deg. C. No intermetallic compounds or defects were formed at the interface of the joint specimens. The joining strength measured by the four-point bend test and the shear test was higher in the joint specimen with Ti/Cu interlayers when compared to that with Cr/Cu interalyers and it was increased with an increase of the HIP temperature from 580 to 620 deg. C. The yield strength of the aged CuCrZr was higher than 150 MPa at 250 deg. C up to an aging temperature of 620 deg. C after a water quenching. It is therefore suggested that the HIP temperature of the Be/CuCrZr joint could be increased to 620 deg. C based on the results obtained from this study

Mechanical and microstructural integrity of nickel-titanium and stainless steel laser joined wires

International Nuclear Information System (INIS)

Vannod, J.; Bornert, M.; Bidaux, J.-E.; Bataillard, L.; Karimi, A.; Drezet, J.-M.; Rappaz, M.; Hessler-Wyser, A.

2011-01-01

The biomedical industry shows increasing interest in the joining of dissimilar metals, especially with the aim of developing devices that combine different mechanical and corrosive properties. As an example, nickel-titanium shape memory alloys joined to stainless steel are very promising for new invasive surgery devices, such as guidewires. A fracture mechanics study of such joined wires was carried out using in situ tensile testing and scanning electron microscopy imaging combined with chemical analysis, and revealed an unusual fracture behaviour at superelastic stress. Nanoindentation was performed to determine the mechanical properties of the welded area, which were used as an input for mechanical computation in order to understand this unexpected behaviour. Automated image correlation allowed verification of the mechanical modelling and a reduced stress-strain model is proposed to explain the special fracture mechanism. This study reveals the fact that tremendous property changes at the interface between the NiTi base wire and the weld area have more impact on the ultimate tensile strength than the chemical composition variation across the welded area.

JOINING OF ECONOMIC ENTITIES AS A POSSIBILITY OF SURVIVAL ON THE MODERN MARKET

Directory of Open Access Journals (Sweden)

Nikolina Pavičić Rešetar

2016-12-01

Full Text Available In today's global market, a major challenge for every economic entity is to be competitive and achieve its objectives. The method of survival shows that those companies with the lowest costs will survive and remain on the market. G. J. Stigler explained this technique on the market share of different sized companies in the steel industry in the United States. In his method he groups enterprises by size (small, medium and large. Historically, it is known that economic entities have been joining together since the Middle Ages. At that time, traders who formed associations were not engaged only in trade, but also in transportation and monetary activity. Economic entities are still joining together today, mostly in the form of a cooperative, cluster, cooperation, public private partnership or holding. The reason for that lies in the reduction of costs, risks and competition and the possibility of increasing the capacity of economic entities. Also, it should be noted that there is a synergy effect when economic entities join together. We are witnesses of many failed businesses, which did not respond to the economic crisis and the needs of the market. The aim of this paper is to try to connect the technique of survival and joining of economic entities and show how a merger is one of the survival models that in conditions of economic crisis provides options to business entities. Only companies with the lowest costs and high-quality technology can survive and compete in today's market.

Increasing FSW join strength by optimizing feed rate, rotating speed and pin angle

Science.gov (United States)

Darmadi, Djarot B.; Purnowidodo, Anindito; Siswanto, Eko

2017-10-01

Principally the join in Friction Stir Welding (FSW) is formed due to mechanical bonding. At least there are two factors determines the quality of this join, first is the temperature in the area around the interface and secondly the intense of mixing forces in nugget zone to create the mechanical bonding. The adequate temperature creates good flowability of the nugget zone and an intensive mixing force produces homogeneous strong bonding. Based on those two factors in this research the effects of feed rate, rotating speed and pin angle of the FSW process to the tensile strength of resulted join are studied. The true experimental method was used. Feed rate was varied at 24, 42, 55 and 74 mm/minutes and from the experimental results, it can be concluded that the higher feed rate decreases the tensile strength of weld join and it is believed due to the lower heat embedded in the material. Inversely, the higher rotating speed increases the join’s tensile strength as a result of higher heat embedded in base metal and higher mixing force in the nugget zone. The rotating speed were 1842, 2257 and 2904 RPMs. The pin angle determines the direction of mixing force. With variation of pin angle: 0°, 4°, 8° and 12° the higher pin angle generally increases the tensile strength because of more intensive mixing force. For 12° pin angle the lower tensile strength is found since the force tends to push out the nugget area from the joint gap.

Development of joining techniques for fabrication of fuel rod simulators

International Nuclear Information System (INIS)

Moorhead, A.J.; McCulloch, R.W.; Reed, R.W.; Woodhouse, J.J.

1980-10-01

Much of the safety-related thermal-hydraulic tests on nuclear reactors are conducted not in the reactor itself, but in mockup segments of a core that uses resistance-heated fuel rod simulators (FRS) in place of the radioactive fuel rods. Laser welding and furnace brazing techniques are described for joining subassemblies for FRS that have survived up to 1000 h steady-state operation at 700 to 1100 0 C cladding temperatures and over 5000 thermal transients, ranging from 10 to 100 0 C/s. A pulsed-laser welding procedure that includes use of small-diameter filler wire is used to join one end of a resistance heating element of Pt-8 W, Fe-22 Cr-5.5 Al-0.5 Co, or 80 Ni-20 Cr (wt %) to a tubular conductor of an appropriate intermediate material. The other end of the heating element is laser welded to an end plug, which in turn is welded to a central conductor rod

CuPb rheocast alloy as joining material for CFC composites

Science.gov (United States)

Salvo, M.; Lemoine, P.; Ferraris, M.; Appendino Montorsi, M.; Matera, R.

1995-10-01

High heat flux components for future use in thermonuclear fusion reactors are designed as layered structures. The assembling of the different parts (armour, heat sink and external structure) requires a joint which could withstand large heat loads and thermal stresses. In this paper we examined a 50 wt% PbCu rheocast alloy (RCA) as joining material for the armour/heat sink joint. The alloy was prepared in vacuum in a rotational furnace and was characterized by SEM-EDS analysis and heating microscopy. The obtained microstructure was globular as foreseen and it remained after prolonged heating at 650°C. The alloy showed very good ductility: sheets of about 200 μm were rolled starting from about 1 × 1 × 1 cm 3 cubes. The alloy was successful in joining both the armour and the heat sink materials, respectively, carbon fibre reinforced composites and copper. Initial mechanical testing shows that the technique is viable for the foreseen applications in the field of thermonuclear fusion reactors.

Cu-Pb rheocast alloy as joining material for CFC composites

International Nuclear Information System (INIS)

Salvo, M.

1995-01-01

High heat flux components for future use in thermonuclear fusion reactors are designed as layered structures. The assembling of the different parts (armour, heat sink and external structure) requires a joint which could withstand large heat loads and thermal stresses. In this paper we examined a 50 wt% Pb-Cu rheocast alloy (RCA) as joining material for the armour/heat sink joint. The alloy was prepared in vacuum in a rotational furnace and was characterized by SEM-EDS analysis and heating microscopy. The obtained microstructure was globular as foreseen and it remained after prolonged heating at 650 C. The alloy showed very good ductility: sheets of about 200 μm were rolled starting from about 1x1x1 cm 3 cubes. The alloy was successful in joining both the armour and the heat sink materials, respectively, carbon fibre reinforced composites and copper. Initial mechanical testing shows that the technique is viable for the foreseen applications in the field of thermonuclear fusion reactors. (orig.)

The Colour Treatment: A Convergence of Art and Medicine at the Red Cross Russell Lea Nerve Home.

Science.gov (United States)

Berryman, Jim

2016-01-01

When the Red Cross opened its new convalescent home at Russell Lea in Sydney in 1919, it contained a coloured room designed for treating ‘nerve cases’. This room was painted by Roy de Maistre, a young artist, and was modelled on the Kemp Prossor colour scheme trialled at the McCaul Convalescent Hospital in London for the treatment of shell shock. Dubbed the ‘colour cure’ by the popular press, this unconventional treatment was ignored by the Australian medical profession. The story of de Maistre's colour experiment is not widely known outside the specialist field of Australian art history. Focusing on the colour room as a point of convergence between art and medicine in the context of the First World War, this article investigates Red Cross activities and the care of soldiers suffering from nervous conditions.

Performance of two liquids scintillation and optimization of a Wallac 1411 counter in the tritium quantification in aqueous samples

International Nuclear Information System (INIS)

Contreras de la Cruz, E. de J.; Lopez del Rio, H.; Davila R, J. I.; Mireles G, F.; Pinedo V, J. L.

2014-10-01

The optimization of a liquid scintillation counting Wallac 1411 is presented as well as the performance of the liquids scintillation miscible in water OptiPhase Hi Safe 3 and Last Gold Ab, in the tritium quantification in aqueous samples. The luminescence effect, the quenching, the solution ph and the level of pulse amplitude comparator (Pac) were evaluated in the response of both liquids scintillation in the tritium measurement. The quenching and the luminescence modify the scintillators response; in the first of them the counting efficiency decreases and the minimum detectable activity increases; the second interferes in the tritium quantification in the interest window, but the effect disappears after 4 hours of darkness of the samples. The maximum counting efficiency was of 24% for OptiPhase Hi Safe 3 and 31% for Last Gold Ab, diminishing with the quenching until values of 8 and 11%, respectively. For a counting time of 6 hours and lower quenching, the minimum detectable concentration for OptiPhase Hi Safe 3 was of 13.4 ± 0.2 Bq/L and 9.9 ± 0.1 Bq/L for Last Gold Ab. Both scintillators responded appropriately to sour and basic solutions, being only presented chemiluminescence in Last Gold Ab to ph highly basic. The Pac application that varies between 1 and 256 does not have effect in the tritium measurement until values above 90. (Author)

Self-healing of cracks in Ag joining layer for die-attachment in power devices

Energy Technology Data Exchange (ETDEWEB)

Chen, Chuantong, E-mail: chenchuantong@sanken.osaka-u.ac.jp; Nagao, Shijo; Suganuma, Katsuaki; Jiu, Jinting; Zhang, Hao; Sugahara, Tohru [Institute of Scientific and Industrial Research, Osaka University, Mihogaoka 8-1, Ibaraki, Osaka 567-0047 (Japan); Iwashige, Tomohito; Sugiura, Kazuhiko; Tsuruta, Kazuhiro [Research Division 3, Denso Corporation, Komenoki-cho, Minamiyama 500-1, Nissin, Aichi 470-0111 (Japan)

2016-08-29

Sintered silver (Ag) joining has attracted significant interest in power devices modules for its ability to form stable joints with a porous interconnection layer. A function for the self-healing of cracks in sintered porous Ag interlayers at high temperatures is discovered and reported here. A crack which was prepared on a Ag joining layer was closed after heating at 200 °C in air. The tensile strength of pre-cracked Ag joining layer specimens recovers to the value of non-cracked specimens after heating treatment. Transmission electron microscopy (TEM) was used to probe the self-healing mechanism. TEM images and electron diffraction patterns show that a large quantity of Ag nanoparticles formed at the gap with the size less than 10 nm, which bridges the crack in the self-healing process. This discovery provides additional motivation for the application of Ag as an interconnection material for power devices at high temperature.

States consider suit if DOE refuses spent fuel

International Nuclear Information System (INIS)

Zeyher, A.

1994-01-01

Michigan, Florida, and Minnesota were joined by Wisconsin on April 21 in the Nuclear Waste Strategy Coalition (NWSC), a group of utilities, state regulators, and state attorneys general that have banded together to decide what to do about the Department of Energy's apparent intention to renege on its obligation to begin taking title to spent nuclear fuel by January 31, 1998. According to Ronald Russell, a commissioner on the Michigan Public Service Commission and cofounder of the NWSC, another six states have expressed interest in joining the coalition. open-quotes We're looking at encouraging the DOE to step up to its legal responsibility to take nuclear spent fuel by 1998,close quotes Russell said. The objectives of the coalition include asking the DOE to support privatization of nuclear storage, to review the management of the final repository program in order to make it more efficient, and to identify legislative changes that the DOE might feel are necessary for it to accomplish its charge. The NWSC is also considering filing a lawsuit in response to the DOE's open-quotes anticipatory breach of an executory contract.close quotes The NWSC and others feel that the Nuclear Waste Policy Act of 1982 and the related standard contracts between the DOE and the utilities form a legal contract for the DOE to take the spent fuel on the agreed upon date

Joining and Integration of Silicon Nitride Ceramics for Aerospace and Energy Systems

Science.gov (United States)

Singh, M.; Asthana, R.

2009-01-01

Light-weight, creep-resistant silicon nitride ceramics possess excellent high-temperature strength and are projected to significantly raise engine efficiency and performance when used as turbine components in the next-generation turbo-shaft engines without the extensive cooling that is needed for metallic parts. One key aspect of Si3N4 utilization in such applications is its joining response to diverse materials. In an ongoing research program, the joining and integration of Si3N4 ceramics with metallic, ceramic, and composite materials using braze interlayers with the liquidus temperature in the range 750-1240C is being explored. In this paper, the self-joining behavior of Kyocera Si3N4 and St. Gobain Si3N4 using a ductile Cu-based active braze (Cu-ABA) containing Ti will be presented. Joint microstructure, composition, hardness, and strength as revealed by optical microscopy, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Knoop microhardness test, and offset compression shear test will be presented. Additionally, microstructure, composition, and joint strength of Si3N4/Inconel 625 joints made using Cu-ABA, will be presented. The results will be discussed with reference to the role of chemical reactions, wetting behavior, and residual stresses in joints.

Effect of epoxy resin on bending momentum in L type corner joins

Directory of Open Access Journals (Sweden)

Mehmet Nuri Yıldırım

2017-11-01

Full Text Available In the furniture industry, the joining points of frame and box construction furniture according to the loads to be affected by the use place is important for the security of the user and service life of the furniture element. In this direction, it is aimed to determine the diagonal compression and diagonal tensile moment values of "L" type corner joints of box framed construction furniture prepared from solid wood materials. The Pinus Nigra, Fagus Orientalis L and Populus Nigra were used as solid wood materials. Wood-based biscuit joining elements were used in corner joints of the test construction and epoxy resin was used as glue for materials. The static loads were applied to construction according to ASTM-D1037. The results show that, the highest tensile and compression values were obtained from Fagus Orientalis L and the lowest values were obtained from Populus Nigra specimens. In the statistical study, the difference between the tensile and compressive bending moment values of the biscuit connection element was found to be statistically significant. This study indicates that, it is suggested to use of L type joints prepared from Fagus Orientalis L by using epoxy resin and wood based biscuit joining element in frame constructions.

Joining of beryllium by braze welding technique: preliminary results

Energy Technology Data Exchange (ETDEWEB)

Banaim, P.; Abramov, E. [Ben-Gurion Univ. of the Negev, Beersheba (Israel); Zalkind, S.; Eden, S.

1998-01-01

Within the framework of some applications, there is a need to join beryllium parts to each other. Gas Tungsten Arc Braze Welds were made in beryllium using 0.3 mm commercially Aluminum (1100) shim preplaced at the joint. The welds exhibited a tendency to form microcracks in the Fusion Zone and Heat Affected Zone. All the microcracks were backfilled with Aluminum. (author)

AUGMENTING 3D CITY MODEL COMPONENTS BY GEODATA JOINS TO FACILITATE AD-HOC GEOMETRIC-TOPOLOGICALLY SOUND INTEGRATION

Directory of Open Access Journals (Sweden)

R. Kaden

2012-07-01

Full Text Available Virtual 3D city models are integrated complex compositions of spatial data of different themes, origin, quality, scale, and dimensions. Within this paper, we address the problem of spatial compatibility of geodata aiming to provide support for ad-hoc integration of virtual 3D city models including geodata of different sources and themes like buildings, terrain, and city furniture. In contrast to related work which is dealing with the integration of redundant geodata structured according to different data models and ontologies, we focus on the integration of complex 3D models of the same representation (here: CityGML but regarding to the geometric-topological consistent matching of non-homologous objects, e.g. a building is connected to a road, and their geometric homogenisation. Therefore, we present an approach including a data model for a Geodata Join and the general concept of an integration procedure using the join information. The Geodata Join aims to bridge the lack of information between fragmented geodata by describing the relationship between adjacent objects from different datasets. The join information includes the geometrical representation of those parts of an object, which have a specific/known topological or geometrical relationship to another object. This part is referred to as a Connector and is either described by points, lines, or surfaces of the existing object geometry or by additional join geometry. In addition, the join information includes the specification of the connected object in the other dataset and the description of the topological and geometrical relationship between both objects, which is used to aid the matching process. Furthermore, the Geodata Join contains object-related information like accuracy values and restrictions of movement and deformation which are used to optimize the integration process. Based on these parameters, a functional model including a matching algorithm, transformation methods, and

An experimental study on joining of severe plastic deformed aluminium materials with friction welding method

Energy Technology Data Exchange (ETDEWEB)

Sahin, Mumin [Mechanical Engineering Department, Trakya University, 22030 Edirne (Turkey)], E-mail: mumins@trakya.edu.tr; Erol Akata, H.; Ozel, Kaan [Mechanical Engineering Department, Trakya University, 22030 Edirne (Turkey)

2008-07-01

In this study, 5083 aluminium alloys, which were exposed to severe plastic deformation, were joined with friction welding method and the variation in mechanical properties of the joints was experimentally investigated. Severe plastic deformation methods can be classified as equal channel angular pressing (ECAP) (in other words, equal cross section lateral extrusion - ECSLE) and cyclic extrusion-compression. Aluminium alloy as test material 5083 and square cross-sectional equal channel angular pressing die for severe plastic deformation were used in the study. Firstly 5083 alloys, as purchased, were joined with friction welding method. The optimum parameters for friction time, upset time, friction pressure and upset pressure, which are necessary for welding, were obtained. Afterwards, 5083 aluminium materials as purchased were prepared as square cross-section and then 1-pass severe plastic deformation was applied to specimen by equal channel angular pressing die. The obtained parts as square form were prepared as cylindrical form by machining and then the parts were joined by continuous drive friction welding equipment that was designed and produced in laboratory conditions before. Later, the tensile strengths of the parts, obtained at optimum conditions, were compared with those of the joined parts as purchased form. Then, hardness variations and microstructures of joints were examined. Finally, the obtained results were commented on.

Nonhomologous DNA End Joining in Cell-Free Extracts

Directory of Open Access Journals (Sweden)

Sheetal Sharma

2010-01-01

Full Text Available Among various DNA damages, double-strand breaks (DSBs are considered as most deleterious, as they may lead to chromosomal rearrangements and cancer when unrepaired. Nonhomologous DNA end joining (NHEJ is one of the major DSB repair pathways in higher organisms. A large number of studies on NHEJ are based on in vitro systems using cell-free extracts. In this paper, we summarize the studies on NHEJ performed by various groups in different cell-free repair systems.

Distinct DNA repair pathways involving RecA and nonhomologous end joining in Mycobacterium smegmatis.

OpenAIRE

Korycka-Machala, M; Brzostek, A; Rozalska, S; Rumijowska-Galewicz, A; Dziedzic, R; Bowater, R; Dziadek, J

2006-01-01

Mycobacterium smegmatis was used to study the relationship between DNA repair processes involving RecA and nonhomologous end joining (NHEJ). The effect of gene deletions in recA and/or in two genes involved in NHEJ (ku and ligD) was tested on the ability of bacteria to join breaks in plasmids transformed into them and in their response to chemicals that damage DNA. The results provide in vivo evidence that only NHEJ is required for the repair of noncompatible DNA ends. By contrast, the respon...

Analytical and experimental evaluation of joining silicon carbide to silicon carbide and silicon nitride to silicon nitride for advanced heat engine applications Phase 2. Final report

Energy Technology Data Exchange (ETDEWEB)

Sundberg, G.J.; Vartabedian, A.M.; Wade, J.A.; White, C.S. [Norton Co., Northboro, MA (United States). Advanced Ceramics Div.

1994-10-01

The purpose of joining, Phase 2 was to develop joining technologies for HIP`ed Si{sub 3}N{sub 4} with 4wt% Y{sub 2}O{sub 3} (NCX-5101) and for a siliconized SiC (NT230) for various geometries including: butt joins, curved joins and shaft to disk joins. In addition, more extensive mechanical characterization of silicon nitride joins to enhance the predictive capabilities of the analytical/numerical models for structural components in advanced heat engines was provided. Mechanical evaluation were performed by: flexure strength at 22 C and 1,370 C, stress rupture at 1,370 C, high temperature creep, 22 C tensile testing and spin tests. While the silicon nitride joins were produced with sufficient integrity for many applications, the lower join strength would limit its use in the more severe structural applications. Thus, the silicon carbide join quality was deemed unsatisfactory to advance to more complex, curved geometries. The silicon carbide joining methods covered within this contract, although not entirely successful, have emphasized the need to focus future efforts upon ways to obtain a homogeneous, well sintered parent/join interface prior to siliconization. In conclusion, the improved definition of the silicon carbide joining problem obtained by efforts during this contract have provided avenues for future work that could successfully obtain heat engine quality joins.

Ice-Dammed Lake Drainage Evolution at Russell Glacier, West Greenland

Directory of Open Access Journals (Sweden)

Jonathan L. Carrivick

2017-11-01

Full Text Available KEY POINTS/HIGHLIGHTSTwo rapid ice-dammed lake drainage events gauged and ice dam geometry measured.A melt enlargement model is developed to examine the evolution of drainage mechanism(s.Lake temperature dominated conduit melt enlargement and we hypothesize a flotation trigger.Glaciological and hydraulic factors that control the timing and mechanisms of glacier lake outburst floods (GLOFs remain poorly understood. This study used measurements of lake level at 15 min intervals and known lake bathymetry to calculate lake outflow during two GLOF events from the northern margin of Russell Glacier, west Greenland. We used measured ice surface elevation, interpolated subglacial topography and likely conduit geometry to inform a melt enlargement model of the outburst evolution. The model was tuned to best-fit the hydrograph rising limb and timing of peak discharge in both events; it achieved Mean Absolute Errors of <5%. About one third of the way through the rising limb, conduit melt enlargement became the dominant drainage mechanism. Lake water temperature, which strongly governed the enlargement rate, preconditioned the high peak discharge and short duration of these floods. We hypothesize that both GLOFs were triggered by ice dam flotation, and localized hydraulic jacking sustained most of their early-stage outflow, explaining the particularly rapid water egress in comparison to that recorded at other ice-marginal lakes. As ice overburden pressure relative to lake water hydraulic head diminished, flow became confined to a subglacial conduit. This study has emphasized the inter-play between ice dam thickness and lake level, drainage timing, lake water temperature and consequently rising stage lake outflow and flood evolution.

Effect of material flow on joint strength in activation spot joining of Al alloy and steel sheets

International Nuclear Information System (INIS)

Watanabe, Goro; Yogo, Yasuhiro; Takao, Hisaaki

2014-01-01

A new joining method for dissimilar metal sheets was developed where a rotated consumable rod of Al alloy is pressed onto an Al alloy sheet at the part overlapped with a mild steel sheet. The metal flow in the joining region is increased by the through-hole in the Al sheet and consumable Al rod. The rod creates the joint interface and pads out of the thinly joined parts through pressing. This produces a higher joint strength than that of conventional friction stir spot welding. Measurements of the joint interface showed the presence of a 5-10 nm thick amorphous layer consisting of Al and Mg oxides

Dilute Russel Viper Venom Time analysis in a Haematology Laboratory: An audit.

Science.gov (United States)

Kruger, W; Meyer, P W A; Nel, J G

2018-04-17

To determine whether the current set of evaluation criteria used for dilute Russel Viper Venom Time (dRVVT) investigations in the routine laboratory meet expectation and identify possible shortcomings. All dRVVT assays requested from January 2015 to December 2015 were appraised in this cross-sectional study. The raw data panels were compared with the new reference interval, established in 2016, to determine the sequence of assays that should have been performed. The interpretive comments were audited, and false-negative reports identified. Interpretive comments according to three interpretation guidelines were compared. The reagent cost per assay was determined, and reagent cost wastage, due to redundant tests, was calculated. Only ~9% of dRVVT results authorized during 2015 had an interpretive comment included in the report. ~15% of these results were false-negative interpretations. There is a significant statistical difference in interpretive comments between the three interpretation methods. Redundant mixing tests resulted in R 7477.91 (~11%) reagent cost wastage in 2015. We managed to demonstrate very evident deficiencies in our own practice and managed to establish a standardized workflow that will potentially render our service more efficient and cost effective, aiding clinicians in making improved treatment decisions and diagnoses. Furthermore, it is essential that standard operating procedures be kept up to date and executed by all staff in the laboratory. © 2018 John Wiley & Sons Ltd.

Thin shells joining local cosmic string geometries

Energy Technology Data Exchange (ETDEWEB)

Eiroa, Ernesto F. [Universidad de Buenos Aires, Ciudad Universitaria Pabellon I, Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Buenos Aires (Argentina); Instituto de Astronomia y Fisica del Espacio (IAFE, CONICET-UBA), Buenos Aires (Argentina); Rubin de Celis, Emilio; Simeone, Claudio [Universidad de Buenos Aires, Ciudad Universitaria Pabellon I, Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Buenos Aires (Argentina); Ciudad Universitaria Pabellon I, IFIBA-CONICET, Buenos Aires (Argentina)

2016-10-15

In this article we present a theoretical construction of spacetimes with a thin shell that joins two different local cosmic string geometries. We study two types of global manifolds, one representing spacetimes with a thin shell surrounding a cosmic string or an empty region with Minkowski metric, and the other corresponding to wormholes which are not symmetric across the throat located at the shell. We analyze the stability of the static configurations under perturbations preserving the cylindrical symmetry. For both types of geometries we find that the static configurations can be stable for suitable values of the parameters. (orig.)

Thin shells joining local cosmic string geometries

International Nuclear Information System (INIS)

Eiroa, Ernesto F.; Rubin de Celis, Emilio; Simeone, Claudio

2016-01-01

In this article we present a theoretical construction of spacetimes with a thin shell that joins two different local cosmic string geometries. We study two types of global manifolds, one representing spacetimes with a thin shell surrounding a cosmic string or an empty region with Minkowski metric, and the other corresponding to wormholes which are not symmetric across the throat located at the shell. We analyze the stability of the static configurations under perturbations preserving the cylindrical symmetry. For both types of geometries we find that the static configurations can be stable for suitable values of the parameters. (orig.)

Joining by plating: optimization of occluded angle

International Nuclear Information System (INIS)

Dini, J.W.; Johnson, H.R.; Kan, Y.R.

1978-11-01

An empirical method has been developed for predicting the minimum angle required for maximum joint strength for materials joined by plating. This is done through a proposed power law failure function, whose coefficients are taken from ring shear and conical head tensile data for plating/substrate combinations and whose exponent is determined from one set of plated-joint data. Experimental results are presented for Al-Ni-Al (7075-T6) and AM363-Ni-AM363 joints, and the failure function is used to predict joint strengths for Al-Ni-Al (2024-T6), UTi-Ni-UTi, and Be-Ti-Be

The usages of JOIN2 authority records

CERN Multimedia

CERN. Geneva; Thiele, Robert

2017-01-01

An important base of the common JOIN2 repository infrastructure of DESY, DKFZ, FZJ, GSI, MLZ and RWTH Aachen are about 134 000 authority records for grants, projects, large-scale infrastructures, cooperations, journals, and different kinds of keys. All instances are using the authorities together. We will present how these authority data are used for different purposes e.g. the recent and upcoming obligations to report to regard to our funding and the data export to openAire. Furthermore, we discuss this in dependence to the German “Kerndatensatz Forschung”, which will be the new standard for future.

Characterisation of the joining zone of serially arranged hybrid semi-finished components

Science.gov (United States)

Behrens, B.-A.; Chugreev, A.; Matthias, T.

2018-05-01

Forming of already joined semi-finished products is an innovative approach to manufacture components which are well-adapted to external loads. This approach results in an economically and ecologically improved production by the targeted use of high-quality materials in component areas, which undergo high stresses. One possible production method for hybrid semi-finished products is friction welding. This welding method allows for the production of hybrid semi-finished products made of aluminium and steel as well as steel and steel. In this paper, the thermomechanical tensile and shear stresses causing a failure of the joined zone are experimentally determined through tension tests. These tests are performed with specimens whose joint zones are aligned with different angles to the load direction.

Coincident In Vitro Analysis of DNA-PK-Dependent and -Independent Nonhomologous End Joining

Directory of Open Access Journals (Sweden)

Cynthia L. Hendrickson

2010-01-01

Full Text Available In mammalian cells, DNA double-strand breaks (DSBs are primarily repaired by nonhomologous end joining (NHEJ. The current model suggests that the Ku 70/80 heterodimer binds to DSB ends and recruits DNA-PKcs to form the active DNA-dependent protein kinase, DNA-PK. Subsequently, XRCC4, DNA ligase IV, XLF and most likely, other unidentified components participate in the final DSB ligation step. Therefore, DNA-PK plays a key role in NHEJ due to its structural and regulatory functions that mediate DSB end joining. However, recent studies show that additional DNA-PK-independent NHEJ pathways also exist. Unfortunately, the presence of DNA-PKcs appears to inhibit DNA-PK-independent NHEJ, and in vitro analysis of DNA-PK-independent NHEJ in the presence of the DNA-PKcs protein remains problematic. We have developed an in vitro assay that is preferentially active for DNA-PK-independent DSB repair based solely on its reaction conditions, facilitating coincident differential biochemical analysis of the two pathways. The results indicate the biochemically distinct nature of the end-joining mechanisms represented by the DNA-PK-dependent and -independent NHEJ assays as well as functional differences between the two pathways.

Development of low temperature solid state joining technology of dissimilar for nuclear heat exchanger tube components

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-08-15

By conventional fusion welding process (TIG), a realization of reliable and sound joints for the nuclear heat exchanger components is very difficult, especially for the parts comprising of the dissimilar metal couples (Ti-STS, Ti-Cu alloy etc.). This is mainly attributed to the formation of brittle intermetallics (Ti{sub x}Cu{sub y}, Ti{sub x}Fe{sub y}, Ti{sub x}Ni{sub y} etc.) and wide difference in physical properties. Moreover, it usually employs very high thermal input, so making it difficult to obtain sound joints due to generations of high residual stresses and degradation of the adjacent base metals, even for similar metal combinations. In this project, the low temperature solid-state joining technology was established by developing new alloy fillers, e.g. the multi-component eutectic based alloys or amorphous alloys, and thereby lowering the joining temperature down to {approx}800 .deg. C without affecting the structural properties of base metals. Based on a low temperature joining, the interlayer engineering technology was then developed to be able to eliminate the brittleness of the joints for strong Ti-STS dissimilar joints, and the diffusion brazing technology of Ti-Ti with a superior joining strength and corrosion-resistance comparable to those of base metal were developed. By using those developed technologies, the joining procedures feasible for the heat exchanger components were finally established for the dissimilar metal joints including Ti tube sheet to super STS tube, Ti tube sheet to super STS tube sheet, and the joints of the Ti tube to Ti tube sheet

Immune-mediated thrombocytopenia associated with angiostrongylus vasorum infection in a jack russell terrier

Directory of Open Access Journals (Sweden)

JO'Neill Emma

2010-07-01

Full Text Available Abstract A twenty-month-old Jack Russell terrier was presented with a four-day history of thrombocytopenia, echymotic inguinal haemorrhages, coughing and reduced exercise tolerance. Clinical examination revealed several petechial haemorrhages on the gingivae and small echymotic haemorrhages in the inguinal region, along with mild bilateral epistaxis. Haematology confirmed a platelet count of 1.0 × 10/L. Thoracic radiographs revealed a wide-spread mixed alveolar-interstitial lung pattern, apparent throughout the entire lungfield, but particularly marked within the left lung lobes. A presumptive diagnosis of immune-mediated thrombocytopenia was made and the dog was treated with vincristine and immunosuppressive doses of prednisolone. Initially anaemia developed following gastrointestinal haemorrhage; however, after symptomatic treatment the dog showed a marked clinical improvement. Evaluation for an underlying cause of the disease revealed Angiostrongylus vasorum L1 larvae on faecal analysis and treatment with fenbendazole was commenced. The dog made a full clinical recovery with all treatment was withdrawn within five weeks of diagnosis. This is the second report of immune-mediated thrombocytopenia associated with Angiostrongylus vasorum infection and it is the first to be successfully managed. The report highlights that Angiostrongylus vasorum should be considered in young dogs presented with thrombocytopenia.

Microstructure and mechanical properties of low-activation glass-ceramic joining and coating for SiC/SiC composites

International Nuclear Information System (INIS)

Katoh, Yutai; Kotani, M.; Kohyama, A.; Montorsi, M.; Salvo, M.; Ferraris, M.

2000-01-01

Calcia-alumina (CA) glass-ceramic was studied as a candidate low-activation joining and sealing material for SiC/SiC components for fusion blanket and diverter structures, in terms of microstructural stability and mechanical properties. The CA glass-ceramic joining and seal coating were applied to the Hi-Nicalon TM SiC fiber-reinforced SiC matrix composites in which the matrix had been formed through chemical vapor infiltration and polymer impregnation and pyrolysis methods. Microstructural characterization was carried out for the joined and coated materials by optical and scanning electron microscopy (SEM). The mechanical property of the joint was evaluated through a shear test on sandwich joints. The average shear strength of the joined structures was 28 MPa at room temperature. Fractography revealed that the fracture occurred in the glass phase and the shear strength may be improved by reduction of the glass fraction

Requirement for XLF/Cernunnos in alignment-based gap filling by DNA polymerases ? and ? for nonhomologous end joining in human whole-cell extracts

OpenAIRE

Akopiants, Konstantin; Zhou, Rui-Zhe; Mohapatra, Susovan; Valerie, Kristoffer; Lees-Miller, Susan P.; Lee, Kyung-Jong; Chen, David J.; Revy, Patrick; de Villartay, Jean-Pierre; Povirk, Lawrence F.

2009-01-01

XLF/Cernunnos is a core protein of the nonhomologous end-joining pathway of DNA double-strand break repair. To better define the role of Cernunnos in end joining, whole-cell extracts were prepared from Cernunnos-deficient human cells. These extracts effected little joining of DNA ends with cohesive 5? or 3? overhangs, and no joining at all of partially complementary 3? overhangs that required gap filling prior to ligation. Assays in which gap-filled but unligated intermediates were trapped us...

Fabrication and characterization of joined silicon carbide cylindrical components for nuclear applications

Science.gov (United States)

Khalifa, H. E.; Deck, C. P.; Gutierrez, O.; Jacobsen, G. M.; Back, C. A.

2015-02-01

The use of silicon carbide (SiC) composites as structural materials in nuclear applications necessitates the development of a viable joining method. One critical application for nuclear-grade joining is the sealing of fuel within a cylindrical cladding. This paper demonstrates cylindrical joint feasibility using a low activation nuclear-grade joint material comprised entirely of β-SiC. While many papers have considered joining material, this paper takes into consideration the joint geometry and component form factor, as well as the material performance. Work focused specifically on characterizing the strength and permeability performance of joints between cylindrical SiC-SiC composites and monolithic SiC endplugs. The effects of environment and neutron irradiation were not evaluated in this study. Joint test specimens of different geometries were evaluated in their as-fabricated state, as well as after being subjected to thermal cycling and partial mechanical loading. A butted scarf geometry supplied the best combination of high strength and low permeability. A leak rate performance of 2 × 10-9 mbar l s-1 was maintained after thermal cycling and partial mechanical loading and sustained applied force of 3.4 kN, or an apparent strength of 77 MPa. This work shows that a cylindrical SiC-SiC composite tube sealed with a butted scarf endplug provides out-of-pile strength and permeability performance that meets light water reactor design requirements.

UK Announces Intention to Join ESO

Science.gov (United States)

2000-11-01

Summary The Particle Physics and Astronomy Research Council (PPARC) , the UK's strategic science investment agency, today announced that the government of the United Kingdom is making funds available that provide a baseline for this country to join the European Southern Observatory (ESO) . The ESO Director General, Dr. Catherine Cesarsky , and the ESO Community warmly welcome this move towards fuller integration in European astronomy. "With the UK as a potential member country of ESO, our joint opportunities for front-line research and technology will grow significantly", she said. "This announcement is a clear sign of confidence in ESO's abilities, most recently demonstrated with the construction and operation of the unique Very Large Telescope (VLT) on Paranal. Together we will look forward with confidence towards new, exciting projects in ground-based astronomy." It was decided earlier this year to place the 4-m UK Visible and Infrared Survey Telescope (VISTA) at Paranal, cf. ESO Press Release 03/00. Following negotiations between ESO and PPARC, a detailed proposal for the associated UK/ESO Agreement with the various entry modalities will now be presented to the ESO Council for approval. Before this Agreement can enter into force, the ESO Convention and associated protocols must also be ratified by the UK Parliament. Research and key technologies According to the PPARC press release, increased funding for science, announced by the UK government today, will enable UK astronomers to prepare for the next generation of telescopes and expand their current telescope portfolio through membership of the European Southern Observatory (ESO). The uplift to its baseline budget will enable PPARC to enter into final negotiations for UK membership of the ESO. This will ensure that UK astronomers, together with their colleagues in the ESO member states, are actively involved in global scale preparations for the next generation of astronomy facilities. among these are ALMA

Joining and fabrication techniques for high temperature structures including the first wall in fusion reactor

International Nuclear Information System (INIS)

Lee, Ho Jin; Lee, B. S.; Kim, K. B.

2003-09-01

The materials for PFC's (Plasma Facing Components) in a fusion reactor are severely irradiated with fusion products in facing the high temperature plasma during the operation. The refractory materials can be maintained their excellent properties in severe operating condition by lowering surface temperature by bonding them to the high thermal conducting materials of heat sink. Hence, the joining and bonding techniques between dissimilar materials is considered to be important in case of the fusion reactor or nuclear reactor which is operated at high temperature. The first wall in the fusion reactor is heated to approximately 1000 .deg. C and irradiated severely by the plasma. In ITER, beryllium is expected as the primary armour candidate for the PFC's; other candidates including W, Mo, SiC, B4C, C/C and Si 3 N 4 . Since the heat affected zones in the PFC's processed by conventional welding are reported to have embrittlement and degradation in the sever operation condition, both brazing and diffusion bonding are being considered as prime candidates for the joining technique. In this report, both the materials including ceramics and the fabrication techniques including joining technique between dissimilar materials for PFC's are described. The described joining technique between the refractory materials and the dissimilar materials may be applicable for the fusion reactor and Generation-4 future nuclear reactor which are operated at high temperature and high irradiation

Developments in welding and joining methods of metallic materials

International Nuclear Information System (INIS)

Pilarczyk, J.

2007-01-01

The impact of the welding technology on the economy development. The welding and joining methods review. The particular role of the laser welding and its interesting applications: with filler metal, twin spot laser welding, hybrid welding process, remote welding. The fiber lasers. The high intensity electron beams applications for surface modification. The TIG welding with the use of the active flux. Friction welding, friction stir welding and friction linear welding. (author)

Joining technologies for the plasma facing components of ITER

International Nuclear Information System (INIS)

Barabash, V.; Kalinin, G.; Matera, R.

1998-01-01

An extensive R and D program on the development of the joining technologies between armour (beryllium, tungsten and carbon fibre composites)/copper alloys heat sink and copper alloys/ stainless steel has been carried out by ITER Home Teams. A brief review of this R and D program is presented in this paper. Based on the results, reference technologies for use in ITER have been selected and recommended for further development. (author)

Processing of pro-opiomelanocortin-derived amidated joining peptide and glycine-extended precursor in monkey pituitary

DEFF Research Database (Denmark)

Fenger, M

1991-01-01

The molecular forms of proopiomelanocortin (POMC) derived amidated and C-terminal glycine-extended joining peptide from monkey (Macaca mulatta) pituitary were determined. The predominant forms of joining peptide found were the low molecular peptides POMC(76-105) and POMC(76-106), respectively...... sequence of monkey and human POMC extremely conserved, but also the processing patterns are similar. The monkey therefore serves as a suitable model for studying regulation of the processing of POMC and the hypothalamus-pituitary-adrenal axis in man....

Joining the un global compact in spain : an institutional Aproach

Directory of Open Access Journals (Sweden)

Ainhoa garayar erro

2012-07-01

On the other hand, it can be asserted that the respondent organisations do not perceive major threats from the institutional environment that might undermine the legitimacy gained by joining the GC. Nonetheless, the Spanish organisations participating in the GC highlight the fact that the main institutional factor that might undermine the organization's legitimacy is weak governance and corruption.

Mobile Real-time Tracking of Acute Stroke Patients and Instant, Secure Inter-team Communication - the Join App.

Science.gov (United States)

Munich, Stephan A; Tan, Lee A; Nogueira, Danilo M; Keigher, Kiffon M; Chen, Michael; Crowley, R Webster; Conners, James J; Lopes, Demetrius K

2017-09-01

The primary correlate to survival and preservation of neurologic function in patients suffering from an acute ischemic stroke is time from symptom onset to initiation of therapy and reperfusion. Communication and coordination among members of the stroke team are essential to maximizing efficiency and subsequently early reperfusion. In this work, we aim to describe our preliminary experience using the Join mobile application as a means to improve interdisciplinary team communication and efficiency. We describe our pilot experience with the initiation of the Join mobile application between July 2015 and July 2016. With this application, a mobile beacon is transported with the patient on the ambulance. Transportation milestone timestamps and geographic coordinates are transmitted to the treating facility and instantly communicated to all treatment team members. The transport team / patient can be tracked en route to the treating facility. During our pilot study, 62 patients were triaged and managed using the Join application. Automated time-stamping of critical events, geographic tracking of patient transport and summary documents were obtained for all patients. Treatment team members had an overall favorable impression of the Join application and recommended its continued use. The Join application is one of several components of a multi-institutional, interdisciplinary effort to improve the treatment of patients with acute ischemic stroke. The ability of the treatment team to track patient transport and communicate with the transporting team may improve reperfusion time and, therefore, improve neurologic outcomes.

DNA double-strand break response factors influence end-joining features of IgH class switch and general translocation junctions.

Science.gov (United States)

Panchakshari, Rohit A; Zhang, Xuefei; Kumar, Vipul; Du, Zhou; Wei, Pei-Chi; Kao, Jennifer; Dong, Junchao; Alt, Frederick W

2018-01-23

Ig heavy chain (IgH) class switch recombination (CSR) in B lymphocytes switches IgH constant regions to change antibody functions. CSR is initiated by DNA double-strand breaks (DSBs) within a donor IgH switch (S) region and a downstream acceptor S region. CSR is completed by fusing donor and acceptor S region DSB ends by classical nonhomologous end-joining (C-NHEJ) and, in its absence, by alternative end-joining that is more biased to use longer junctional microhomologies (MHs). Deficiency for DSB response (DSBR) factors, including ataxia telangiectasia-mutated (ATM) and 53BP1, variably impair CSR end-joining, with 53BP1 deficiency having the greatest impact. However, studies of potential impact of DSBR factor deficiencies on MH-mediated CSR end-joining have been technically limited. We now use a robust DSB joining assay to elucidate impacts of deficiencies for DSBR factors on CSR and chromosomal translocation junctions in primary mouse B cells and CH12F3 B-lymphoma cells. Compared with wild-type, CSR and c-myc to S region translocation junctions in the absence of 53BP1, and, to a lesser extent, other DSBR factors, have increased MH utilization; indeed, 53BP1-deficient MH profiles resemble those associated with C-NHEJ deficiency. However, translocation junctions between c-myc DSB and general DSBs genome-wide are not MH-biased in ATM-deficient versus wild-type CH12F3 cells and are less biased in 53BP1- and C-NHEJ-deficient cells than CSR junctions or c-myc to S region translocation junctions. We discuss potential roles of DSBR factors in suppressing increased MH-mediated DSB end-joining and features of S regions that may render their DSBs prone to MH-biased end-joining in the absence of DSBR factors.

ITER oriented issues-1 (joining)

International Nuclear Information System (INIS)

Gervash, A.; Mazul, I.; Litunovsky, N.; Pokrovsky, A.

2004-01-01

Proposing beryllium as plasma facing armor and fast brazing as Be/Cu-alloy joining technique, this paper presents the recent experimental results. It was shown that fast brazing of Be onto both PH-copper like CuCrZr and DS (Dispersion Strengthen)-copper like GlidCop provides reliable joint that does not failure under heat flux up to melting of Be surface. Investigating the influence of neutron irradiation on Be/Cu-alloy joint behavior, in-pile integrated test in a core of nuclear reactor CN-2, Dimitrovgrad, Russia was carried out. In this test actively cooled Be/CuCrZr and Be/GildCop joints were simultaneously subjected to high heat flux (1000 cycles, ∼7.5 MW/m 2 ) and neutron irradiation (total 2.8 x 10 20 n/cm 2 , ∼0.13 dpa). Both type of tested joints successfully survived applied heat and neutron loads. Optic and TEM metallography before and after irradiation as well as micro harness measurements are presented and discussed. (author)

Distinct DNA repair pathways involving RecA and nonhomologous end joining in Mycobacterium smegmatis.

Science.gov (United States)

Korycka-Machala, Malgorzata; Brzostek, Anna; Rozalska, Sylwia; Rumijowska-Galewicz, Anna; Dziedzic, Renata; Bowater, Richard; Dziadek, Jaroslaw

2006-05-01

Mycobacterium smegmatis was used to study the relationship between DNA repair processes involving RecA and nonhomologous end joining (NHEJ). The effect of gene deletions in recA and/or in two genes involved in NHEJ (ku and ligD) was tested on the ability of bacteria to join breaks in plasmids transformed into them and in their response to chemicals that damage DNA. The results provide in vivo evidence that only NHEJ is required for the repair of noncompatible DNA ends. By contrast, the response of mycobacteria to mitomycin C preferentially involved a RecA-dependent pathway.

Advances in appendage joining techniques for PHWR fuel cladding

International Nuclear Information System (INIS)

Desai, P.B.; Ray, T.K.; Date, V.G.; Purushotham, D.S.C.

1995-01-01

This paper describes work carried out at the BARC on the development of a technique to join tiny appendages (spacers and bearing pads) to thin cladding (before loading of UO 2 pellets) by resistance welding for PHWR fuel assemblies. The work includes qualifying the process for production environment, designing prototype equipment for regular production and quality monitoring. In the first phase of development, welding of appendages on UO 2 loaded elements was successfully developed, and is being used in production. Welding of appendages on to empty clad tubes is a superior technique for several reasons. Many problems associated with development of welding on empty tubes were resolved. work was initiated, in the second phase of the development task, to select a suitable technique to join appendages on empty clad tubes without any collapse of thin clad. Several alternatives were reviewed and assessed such as laser, full face welding, shim welding and shrink fitting ring spacers. Selection of a method using a mandrel and a modified electrode geometry was fully developed. Results were optimized and process development successfully completed. Appropriate weld monitoring techniques were also reviewed for their adaptation. This technique is useful for 19, 22 as well as 37 element assemblies. (author)

Joining Forces: A Response to Kathy Rentz from the European Perspective

Science.gov (United States)

Louhiala-Salminen, Leena

2010-01-01

In this article, the author responds to Kathy Rentz. She happily joins forces for pedagogically defensible teaching conditions and gives a brief "activist" account from the European perspective. However, rather than "European," she emphasizes that for the most part, this response looks at business communication teachers'…

Joining of aluminum and stainless steel using AlSi10 brazing filler: Microstructure and mechanical properties

Science.gov (United States)

Fedorov, Vasilii; Uhlig, Thomas; Wagner, Guntram

2017-07-01

Joining of dissimilar materials like stainless steel and aluminum is of special interest for automotive applications. Due to the different properties of these materials, suitable joining techniques are required. Brazing offers the possibilities to manufacture high performance joints in one step and at low joining temperatures. However, these joints often need to withstand a high number of high cyclic loads during application. Therefore, in addition to the monotonic properties, the fatigue behavior of the produced joints must be considered and evaluated. In the present work, specimens are manufactured by induction brazing using an AlSi10 filler and a non-corrosive flux. The mechanical properties are determined by tensile shear tests as well as in fatigue tests at ambient and elevated temperatures. The microstructure of the brazed joints and the fracture surfaces of the tested samples are investigated by SEM.

Studying the Issues in Laser Joining of Lightweight Materials in a Coach-Peel Joint Configuration

Science.gov (United States)

Yang, Guang

In the automotive industry, aluminum alloys have been widely used and partially replaced the conventional steel structures in order to decrease the weight of a car and improve its fuel efficiency. This Thesis focuses on the development of laser joining of light-weight materials, such as aluminum alloys and high-strength galvanized steels. Among different joint types, the coach-peel configuration is of a specific design that requires a heat source capable of heating up a large surface area of the joint. Coach-peel joints applied on the visible exterior of a car require a smooth transition from the weld surface to the panel surface and low surface roughness without any need for post-processing. Although these joints are used as non-load-bearing components, a desirable strength of the weld is also needed. A fusion-brazing process using a dual-beam laser allows the automotive components such as the roof and side member panels to be joined in a coach-peel configuration with a high surface quality as well as an acceptable strength of the weld. To improve the weld surface quality, processing parameters such as laser beam configuration, laser-wire position, and shielding gas parameters were optimized for joining of aluminum alloy to aluminum alloy. Laser power was optimized for dual-beam laser joining of aluminum alloy to galvanized steel at high speed. The feasibility of joining as-received panels with lubricant was also explored. The identification of strain hardening models of aluminum alloys was conducted for the mechanical finite element analysis of the joint. Control of the molten pool solidification through the selection of laser beam configuration is one approach to improve joint quality. Laser joining of aluminum alloy AA 6111-T4 coach peel panels with the addition of AA 4047 filler wire was investigated using three configurations of laser beam: a single beam, dual beams in-line with the weld bead, and dual beams aligned perpendicular to the weld bead (herein

Joining of Aluminium Alloy and Steel by Laser Assisted Reactive Wetting

Science.gov (United States)

Liedl, Gerhard; Vázquez, Rodrigo Gómez; Murzin, Serguei P.

2018-03-01

Compounds of dissimilar materials, like aluminium and steel offer an interesting opportunity for the automotive industry to reduce the weight of a car body. Thermal joining of aluminium and steel leads to the formation of brittle intermetallic compounds, which negatively affects the properties of the welded joint. Amongst others, growth of such intermetallic compounds depends on maximum temperature and on the time at certain temperatures. Laser welding with its narrow well seam and its fast heating and cooling cycles provides an excellent opportunity to obtain an ultrathin diffusion zone. Joining of sheet metal DC01 with aluminium alloy AW6016 has been chosen for research. The performed experimental studies showed that by a variation of the beam power and scanning speed it is possible to obtain an ultrathin diffusion zone with narrow intermetallic interlayers. With the aim of supporting further investigation of laser welding of the respective and other dissimilar pairings a multi-physical simulation model has been developed.

Unsolved mystery: the role of BRCA1 in DNA end-joining

International Nuclear Information System (INIS)

Saha, Janapriya; Davis, Anthony J.

2016-01-01

Heritable mutations in the tumor suppressor gene BRCA1 increase a woman's lifetime risk of developing breast and ovarian cancer. BRCA1's tumor suppressor function is directly linked to its myriad of functions in the cellular response to DNA double-strand breaks (DSBs). BRCA1 interacts with an extensive array of DNA damage responsive proteins and plays important roles in DSB repair, mediated by the homologous recombination pathway, and in the activation of cell cycle checkpoints. However, the role of BRCA1 in the other two DSB repair pathways, classical non-homologous end-joining (C-NHEJ) and alternative NHEJ (A-NHEJ), remains unclear. In this review, we will discuss the current literature on BRCA1's potential role(s) in modulating both C-NHEJ and A-NHEJ. We also present a model showing that BRCA1 contributes to genomic maintenance by promoting precise DNA repair across all cell cycle phases via the direct modulation of DNA end-joining

Joining and fabrication techniques for high temperature structures including the first wall in fusion reactor

Energy Technology Data Exchange (ETDEWEB)

Lee, Ho Jin; Lee, B. S.; Kim, K. B

2003-09-01

The materials for PFC's (Plasma Facing Components) in a fusion reactor are severely irradiated with fusion products in facing the high temperature plasma during the operation. The refractory materials can be maintained their excellent properties in severe operating condition by lowering surface temperature by bonding them to the high thermal conducting materials of heat sink. Hence, the joining and bonding techniques between dissimilar materials is considered to be important in case of the fusion reactor or nuclear reactor which is operated at high temperature. The first wall in the fusion reactor is heated to approximately 1000 .deg. C and irradiated severely by the plasma. In ITER, beryllium is expected as the primary armour candidate for the PFC's; other candidates including W, Mo, SiC, B4C, C/C and Si{sub 3}N{sub 4}. Since the heat affected zones in the PFC's processed by conventional welding are reported to have embrittlement and degradation in the sever operation condition, both brazing and diffusion bonding are being considered as prime candidates for the joining technique. In this report, both the materials including ceramics and the fabrication techniques including joining technique between dissimilar materials for PFC's are described. The described joining technique between the refractory materials and the dissimilar materials may be applicable for the fusion reactor and Generation-4 future nuclear reactor which are operated at high temperature and high irradiation.

A Partial Join Approach for Mining Co-Location Patterns: A Summary of Results

National Research Council Canada - National Science Library

Yoo, Jin S; Shekhar, Shashi

2005-01-01

.... They propose a novel partial-join approach for mining co-location patterns efficiently. It transactionizes continuous spatial data while keeping track of the spatial information not modeled by transactions...

Requirement for XLF/Cernunnos in alignment-based gap filling by DNA polymerases lambda and mu for nonhomologous end joining in human whole-cell extracts.

Science.gov (United States)

Akopiants, Konstantin; Zhou, Rui-Zhe; Mohapatra, Susovan; Valerie, Kristoffer; Lees-Miller, Susan P; Lee, Kyung-Jong; Chen, David J; Revy, Patrick; de Villartay, Jean-Pierre; Povirk, Lawrence F

2009-07-01

XLF/Cernunnos is a core protein of the nonhomologous end-joining pathway of DNA double-strand break repair. To better define the role of Cernunnos in end joining, whole-cell extracts were prepared from Cernunnos-deficient human cells. These extracts effected little joining of DNA ends with cohesive 5' or 3' overhangs, and no joining at all of partially complementary 3' overhangs that required gap filling prior to ligation. Assays in which gap-filled but unligated intermediates were trapped using dideoxynucleotides revealed that there was no gap filling on aligned DSB ends in the Cernunnos-deficient extracts. Recombinant Cernunnos protein restored gap filling and end joining of partially complementary overhangs, and stimulated joining of cohesive ends more than twentyfold. XLF-dependent gap filling was nearly eliminated by immunodepletion of DNA polymerase lambda, but was restored by addition of either polymerase lambda or polymerase mu. Thus, Cernunnos is essential for gap filling by either polymerase during nonhomologous end joining, suggesting that it plays a major role in aligning the two DNA ends in the repair complex.

Joining of Ni-TiC FGM and Ni-Al Intermetallics by Centrifugal Combustion Synthesis

International Nuclear Information System (INIS)

Ohmi, Tatsuya; Matsuura, Kiyotaka; Iguchi, Manabu; Mizuma, Kiminori

2008-01-01

A centrifugal combustion synthesis (CCS) process has been investigated to join a Ni-Al intermetallic compound and a Ni-TiC cermet. The cermet, a tubular graphite mold, and a green compact of reactants consisting of Al, Ni and NiO were set in a centrifugal caster. When the combustion synthesis reaction was induced in the centrifugal force field, a synthesized molten Ni-Al alloy flowed into the graphite mold and joined to the cermet. The soundness of the joint interface depended on the volume percentage of TiC phase in the cermet. A lot of defects were formed near the interface between the Ni-TiC cermet and the cast Ni-Al alloy when the volume percentage of TiC was 50% or higher. For this kind of cermet system, using a functionally graded cermet such as Ni-10 vol.%TiC/Ni-25 vol.%TiC/Ni-50 vol.%TiC overcame this difficulty. The four-point bending strength of the joined specimen consisting of the three-layered FGM cermet and cast Ni-29 mol%Al alloy was 1010 MPa which is close to the result for a Ni-29 mol%Al alloy specimen

DSCu/SS joining techniques development and testing

International Nuclear Information System (INIS)

Sato, Satoshi; Hatano, Toshihisa; Furuya, Kazuyuki; Kuroda, Toshimasa; Enoeda, Mikio; Takatsu, Hideyuki

1998-01-01

Joining techniques of alumina dispersion strengthened copper alloy (DSCu) and type 316L stainless steel (SS) has been investigated aiming at applying to the fabrication of the ITER first wall/blanket. As the joining method, Hot Isostatic Pressing (HIP) of solid plates and/or blocks has been pursued. By a screening test including HIP temperatures of 980-1050degC, it was concluded that the HIP temperature of 1050degC would be optimum for the simultaneous HIPping of DSCu/DSCu, DSCu/SS and SS/SS. With DSCu/SS joint specimens HIPped at 1050degC, tensile, impact, fatigue, crack propagation, and fracture toughness tests were performed as well as mechanical test of structural model with one SS circular tube embedded. Typically, the properties of the joints were almost the same as those of DSCu or SS base metal with the same heat treatment of the HIP process, thus good joints were obtained, though parts of properties were decreased at elevated test temperature. Typical results of the mechanical test of structural mode indicated that a crack initiated at the inner surface of the SS tube under cyclic operation, and the lifetime of the first wall structure could be evaluated by existing SS fatigue data. Two HIPped first wall panel mock-ups were successfully fabricated with built-in coolant tubes: one was 300 mm long and the other 800 mm long. The former was thermo-mechanically tested with high heat fluxes corresponding to the ITER operation conditions. The mock-up showed good heat removal performance during the high heat flux tests. In addition, there were no cracks and delaminations found at HIPped interfaces by microscopic observation after all tests. Ultrasonic testing have been tried as a non-destructive examination method, and detectable defect size at SS/SS, DSCu/DSCu and DSCu/SS joint interfaces were estimated. (author)

Support groups for HIV-positive people in South Africa: Who joins ...

African Journals Online (AJOL)

Non-members had tested due to illness, reported considerably more pain and were more likely to have no income. PLWHA experienced high mental, physical and social distress which must be addressed. Attention to gender differences is called for. While all members joined the support group to gain information and learn ...

Trajectory similarity join in spatial networks

KAUST Repository

Shang, Shuo; Chen, Lisi; Wei, Zhewei; Jensen, Christian S.; Zheng, Kai; Kalnis, Panos

2017-01-01

With these applications in mind, we provide a purposeful definition of similarity. To enable efficient TS-Join processing on large sets of trajectories, we develop search space pruning techniques and take into account the parallel processing capabilities of modern processors. Specifically, we present a two-phase divide-and-conquer algorithm. For each trajectory, the algorithm first finds similar trajectories. Then it merges the results to achieve a final result. The algorithm exploits an upper bound on the spatiotemporal similarity and a heuristic scheduling strategy for search space pruning. The algorithm's per-trajectory searches are independent of each other and can be performed in parallel, and the merging has constant cost. An empirical study with real data offers insight in the performance of the algorithm and demonstrates that is capable of outperforming a well-designed baseline algorithm by an order of magnitude.

Finite Element Simulation of the Presta Joining Process for Assembled Camshafts: Application to Aluminum Shafts

Directory of Open Access Journals (Sweden)

Robert Scherzer

2018-02-01

Full Text Available This work shows a sequence of numerical models for the simulation of the Presta joining process: a well-established industrial process for manufacturing assembled camshafts. The operation is divided into two sub-steps: the rolling of the shaft to widen the cam seat and the joining of the cam onto the shaft. When manufactured, the connection is tested randomly by loading it with a static torque. Subsequently, there are three numerical models using the finite element method. Additionally, a material model of finite strain viscoplasticity with nonlinear kinematic hardening is used throughout the whole simulation process, which allows a realistic representation of the material behavior even for large deformations. In addition, it enables a transfer of the deformation history and of the internal stresses between different submodels. This work also shows the required parameter identification and the associated material tests. After comparing the numerical results with experimental studies of the manufacturing process for steel-steel connections, the models are used to extend the joining process to the utilization of aluminum shafts.

Analytical and Experimental Evaluation of Joining Silicon Carbide to Silicon Carbide and Silicon Nitride to Silicon Nitride for Advanced Heat Engine Applications Phase II

Energy Technology Data Exchange (ETDEWEB)

Sundberg, G.J.

1994-01-01

Techniques were developed to produce reliable silicon nitride to silicon nitride (NCX-5101) curved joins which were used to manufacture spin test specimens as a proof of concept to simulate parts such as a simple rotor. Specimens were machined from the curved joins to measure the following properties of the join interlayer: tensile strength, shear strength, 22 C flexure strength and 1370 C flexure strength. In parallel, extensive silicon nitride tensile creep evaluation of planar butt joins provided a sufficient data base to develop models with accurate predictive capability for different geometries. Analytical models applied satisfactorily to the silicon nitride joins were Norton's Law for creep strain, a modified Norton's Law internal variable model and the Monkman-Grant relationship for failure modeling. The Theta Projection method was less successful. Attempts were also made to develop planar butt joins of siliconized silicon carbide (NT230).

Joining the Conversation: Twitter as a Tool for Student Political Engagement

Science.gov (United States)

Journell, Wayne; Ayers, Cheryl A.; Beeson, Melissa Walker

2013-01-01

This article describes possibilities afforded by using social media, specifically Twitter, as a way to encourage students to join political conversations across the United States and around the world. In this study, we describe a project in which students used Twitter to share commentary about the state of the 2012 presidential election. The…

Acute hypopituitarism complicating Russell's viper envenomation: case series and systematic review.

Science.gov (United States)

Rajagopala, S; Thabah, M M; Ariga, K K; Gopalakrishnan, M

2015-09-01

Chronic hypopituitarism following Russell viper envenomation (RVE) is a rare but well-recognized syndrome. The clinical features, associations, management and outcomes of RVE associated-acute hypopituitarism (AHP) are not well described. To describe the clinical features, intensive care unit (ICU) management and outcomes of a series of patients with RVE-AHP and identify the clinical associations of RVE-AHP. We describe a series of patients with prospectively identified AHP related to RVE and describe our findings comparing RVE with and without AHP and a systematic search of literature on AHP related to RVE. We identified nine cases of AHP related to RVE. Unexplained hypoglycemia (100%) and hypotension (66.7%) were the most common findings at presentation. AHP occurred after a median of 9 (range, 2-14) days after severe envenomation and was associated with multi-organ dysfunction, lower platelet counts, more bleeding and transfusions when compared to patients with RVE alone. The presence of clinically defined capillary leak syndrome, disseminated intravascular coagulation and mortality were not different from those without AHP. Our systematic search yielded 12 cases of AHP related to RVE; data on associated clinical manifestations, therapy and ASV administration were not available in most reports. AHP is a very rare complication of RVE. Unexplained hypoglycemia and hypotension should prompt evaluation for AHP in RVE. AHP is associated with severe RVE, multi-organ dysfunction, bleeding and need for transfusion. Prompt treatment with steroids may reduce mortality related to AHP in RVE. © The Author 2015. Published by Oxford University Press on behalf of the Association of Physicians. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Contribution of canonical nonhomologous end joining to chromosomal rearrangements is enhanced by ATM kinase deficiency.

Science.gov (United States)

Bhargava, Ragini; Carson, Caree R; Lee, Gabriella; Stark, Jeremy M

2017-01-24

A likely mechanism of chromosomal rearrangement formation involves joining the ends from two different chromosomal double-strand breaks (DSBs). These events could potentially be mediated by either of two end-joining (EJ) repair pathways [canonical nonhomologous end joining (C-NHEJ) or alternative end joining (ALT-EJ)], which cause distinct rearrangement junction patterns. The relative role of these EJ pathways during rearrangement formation has remained controversial. Along these lines, we have tested whether the DNA damage response mediated by the Ataxia Telangiectasia Mutated (ATM) kinase may affect the relative influence of C-NHEJ vs. ALT-EJ on rearrangement formation. We developed a reporter in mouse cells for a 0.4-Mbp deletion rearrangement that is formed by EJ between two DSBs induced by the Cas9 endonuclease. We found that disruption of the ATM kinase causes an increase in the frequency of the rearrangement as well as a shift toward rearrangement junctions that show hallmarks of C-NHEJ. Furthermore, ATM suppresses rearrangement formation in an experimental condition, in which C-NHEJ is the predominant EJ repair event (i.e., expression of the 3' exonuclease Trex2). Finally, several C-NHEJ factors are required for the increase in rearrangement frequency caused by inhibition of the ATM kinase. We also examined ATM effectors and found that H2AX shows a similar influence as ATM, whereas the influence of ATM on this rearrangement seems independent of 53BP1. We suggest that the contribution of the C-NHEJ pathway to the formation of a 0.4-Mbp deletion rearrangement is enhanced in ATM-deficient cells.

Identifying and changing the normative beliefs about aggression which lead young Muslim adults to join extremist anti-Semitic groups in Pakistan.

Science.gov (United States)

Amjad, Naumana; Wood, Alex M

2009-01-01

Two studies investigated the role of beliefs about the acceptability of aggression ("normative beliefs") against Jews in determining who would join an extremist group. In Study 1, students in a university in Pakistan (N=144) completed self-report attitude measures, and were subsequently approached by a confederate who asked whether they wanted to join an extremist anti-Semitic organization. Normative beliefs about aggression against Jews were very strong predictors of whether participants agreed to join. In Study 2, participants (N=92) were experimentally assigned to either a brief educational intervention, designed to improve inter-group relations, or to a control group. They also filled in self-report attitude measures pre and post intervention. Participants in the intervention group were much less likely to agree to join the extremist group, and this effect of the intervention on joining was mediated by changes in normative beliefs about aggression against Jews. The results have implications for theories of inter-group aggression and interventions to prevent people from being recruited into extremist groups.

The Challenge of the GATS for Transition Economies Seeking to Join the WTO

Directory of Open Access Journals (Sweden)

J. Anthony VanDuzer

2004-02-01

Full Text Available Transition economies seeking to join the World Trade Organization (WTO face a variety of distinctive challenges relating to their prospective obligations under the General Agreement on Trade in Services (GATS. Transition economies are characterized by changing market and industry structures on the one hand, and ongoing reforms to their regulatory structures on the other. Both make it extremely difficult for transition economies to develop a position on what WTO services commitments they should undertake in their national schedules of specific commitments. Accession negotiations are further complicated by the evolving nature of GATS rules themselves and the tough negotiating stance taken by existing Members. Based on evidence from recent accessions, the effective minimum requirements relating to services for transition economies seeking to join the WTO are increasing

Meet and Join Matrices in the Poset of Exponential Divisors

Indian Academy of Sciences (India)

... exponential divisor ( G C E D ) and the least common exponential multiple ( L C E M ) do not always exist. In this paper we embed this poset in a lattice. As an application we study the G C E D and L C E M matrices, analogues of G C D and L C M matrices, which are both special cases of meet and join matrices on lattices.

Development of solid-state joining technology of dissimilar metals using amorphous metastable alloy powders

International Nuclear Information System (INIS)

Lee, Min Ku; Rhee, Chang Kyu; Uhm, Young Rang; Park, Jin Ju; Lee, Jeong Gu; Kim, Gwang Ho; Hong, Sung Mo; Lee, Jong Geuk; Kim, Kyoung Ho

2007-04-01

Many nuclear components such as nozzles, steam generator, pipes, condensers, and heat exchangers require a realization of the reliable and high-performance joining or welding between the dissimilar metals or alloys, despite the fact that their melting points, thermal expansion coefficients and physical properties are quite different from each other. The conventional arc welding processes (SMAW, TIG), however, which is currently used as a welding process for NPP components, have not met the requirements of obtaining a reliable and high-quality dissimilar joints, as demonstrated from a number of the previously reported accidents or material failures in the welded joints. This originates from the various weaknesses of the arc welding processes (more than 1700 .deg. C) such as high residual stresses which is sensitive to SCC, porous or deformed joint structures, a formation of grain-coarsened HAZ and an induced degradation of the base metals in the vicinity of the joint. Moreover, they are not applicable to a joining of the dissimilar metals when their melting point or mechanical/physical properties are quite different. In this research, the low-temperature joining (700 .deg. C - 800 .deg. C) and simultaneously strong diffusion bonding technologies between the dissimilar Ti and Cu metals have been developed for the applications to the dissimilar joints of various nuclear tube components

The Ku80 carboxy terminus stimulates joining and artemis-mediated processing of DNA ends.

Science.gov (United States)

Weterings, Eric; Verkaik, Nicole S; Keijzers, Guido; Florea, Bogdan I; Wang, Shih-Ya; Ortega, Laura G; Uematsu, Naoya; Chen, David J; van Gent, Dik C

2009-03-01

Repair of DNA double-strand breaks (DSBs) is predominantly mediated by nonhomologous end joining (NHEJ) in mammalian cells. NHEJ requires binding of the Ku70-Ku80 heterodimer (Ku70/80) to the DNA ends and subsequent recruitment of the DNA-dependent protein kinase catalytic subunit (DNA-PK(CS)) and the XRCC4/ligase IV complex. Activation of the DNA-PK(CS) serine/threonine kinase requires an interaction with Ku70/80 and is essential for NHEJ-mediated DSB repair. In contrast to previous models, we found that the carboxy terminus of Ku80 is not absolutely required for the recruitment and activation of DNA-PK(CS) at DSBs, although cells that harbored a carboxy-terminal deletion in the Ku80 gene were sensitive to ionizing radiation and showed reduced end-joining capacity. More detailed analysis of this repair defect showed that DNA-PK(CS) autophosphorylation at Thr2647 was diminished, while Ser2056 was phosphorylated to normal levels. This resulted in severely reduced levels of Artemis nuclease activity in vivo and in vitro. We therefore conclude that the Ku80 carboxy terminus is important to support DNA-PK(CS) autophosphorylation at specific sites, which facilitates DNA end processing by the Artemis endonuclease and the subsequent joining reaction.

The Ku80 Carboxy Terminus Stimulates Joining and Artemis-Mediated Processing of DNA Ends▿

Science.gov (United States)

Weterings, Eric; Verkaik, Nicole S.; Keijzers, Guido; Florea, Bogdan I.; Wang, Shih-Ya; Ortega, Laura G.; Uematsu, Naoya; Chen, David J.; van Gent, Dik C.

2009-01-01

Repair of DNA double-strand breaks (DSBs) is predominantly mediated by nonhomologous end joining (NHEJ) in mammalian cells. NHEJ requires binding of the Ku70-Ku80 heterodimer (Ku70/80) to the DNA ends and subsequent recruitment of the DNA-dependent protein kinase catalytic subunit (DNA-PKCS) and the XRCC4/ligase IV complex. Activation of the DNA-PKCS serine/threonine kinase requires an interaction with Ku70/80 and is essential for NHEJ-mediated DSB repair. In contrast to previous models, we found that the carboxy terminus of Ku80 is not absolutely required for the recruitment and activation of DNA-PKCS at DSBs, although cells that harbored a carboxy-terminal deletion in the Ku80 gene were sensitive to ionizing radiation and showed reduced end-joining capacity. More detailed analysis of this repair defect showed that DNA-PKCS autophosphorylation at Thr2647 was diminished, while Ser2056 was phosphorylated to normal levels. This resulted in severely reduced levels of Artemis nuclease activity in vivo and in vitro. We therefore conclude that the Ku80 carboxy terminus is important to support DNA-PKCS autophosphorylation at specific sites, which facilitates DNA end processing by the Artemis endonuclease and the subsequent joining reaction. PMID:19103741

Influence of reduced glutathione on end-joining of DNA double-strand breaks: Cytogenetical and molecular approach

Energy Technology Data Exchange (ETDEWEB)

Ghoshal, Nitin [Molecular Genetics Laboratory, Department of Biotechnology & Bioinformatics, North-Eastern Hill University, Shillong, Meghalaya-793022 (India); Sharma, Sheetal [Department of Biochemistry, Indian Institute of Science, Bangalore, 560 012 (India); Banerjee, Atanu; Kurkalang, Sillarine [Molecular Genetics Laboratory, Department of Biotechnology & Bioinformatics, North-Eastern Hill University, Shillong, Meghalaya-793022 (India); Raghavan, Sathees C. [Department of Biochemistry, Indian Institute of Science, Bangalore, 560 012 (India); Chatterjee, Anupam, E-mail: chatterjeeanupam@hotmail.com [Molecular Genetics Laboratory, Department of Biotechnology & Bioinformatics, North-Eastern Hill University, Shillong, Meghalaya-793022 (India)

2017-01-15

Highlights: • DNA lesions induced by Blem and radiation interact well and form higher frequency of exchange aberrations. • Cellular level of glutathione does influence such interaction of DNA lesions. • Oligomer-based cell-free assay system demonstrated better end-joining efficiency at higher level of endogenous GSH. - Abstract: Radiation induced DNA double-strand breaks (DSB) are the major initial lesions whose misrejoining may lead to exchange aberrations. However, the role of glutathione (GSH), a major cellular thiol, in regulating cell’s sensitivity to DNA damaging agents is not well understood. Influence of endogenous GSH on the efficiency of X-rays and bleomycin (Blem) induced DNA DSBs end-joining has been tested here cytogenetically, in human lymphocytes and Hct116 cells. In another approach, oligomeric DNA (75 bp) containing 5′-compatible and non-compatible overhangs mimicking the endogenous DSB were for rejoining in presence of cell-free extracts from cells having different endogenous GSH levels. Frequency of aberrations, particularly exchange aberrations, was significantly increased when Blem was combined with radiation. The exchange aberration frequency was further enhanced when combined treatment was given at 4 °C since DNA lesions are poorly repaired at 4 °C so that a higher number of DNA breaks persist and interact when shifted from 4 °C to 37 °C. The exchange aberrations increased further when the combined treatment was given to Glutathione-ester (GE) pre-treated cells, indicating more frequent rejoining of DNA lesions in presence of higher cellular GSH. This is further supported by the drastic reduction in frequency of exchange aberrations but significant increase in incidences of deletions when combined treatment was given to GSH-depleted cells. End-joining efficiency of DNA DSBs with compatible ends was better than for non-compatible ends. End-joining efficiency of testicular and MCF7 cell extracts was better than that of lungs and

Anti-snake venom activities of ethanolic extract of fruits of Piper longum L. (Piperaceae) against Russell's viper venom: characterization of piperine as active principle.

Science.gov (United States)

Shenoy, P A; Nipate, S S; Sonpetkar, J M; Salvi, N C; Waghmare, A B; Chaudhari, P D

2013-05-20

Piper longum L. fruits have been traditionally used against snakebites in north-eastern and southern region of India. To examine the ability of ethanolic extract of fruits of Piper longum L., Piperaceae (PLE) and piperine, one of the main active principles of Piper longum, to inhibit the Russell's viper (Doboia russelii, Viperidae) snake venom activities. Anti-snake venom activities of ethanolic extract of fruits of Piper longum L. (Piperaceae) and piperine against Russell's viper venom was studied in embryonated fertile chicken eggs, mice and rats by using various models as follows: inhibition of venom lethal action, inhibition of venom haemorrhagic action (in vitro), inhibition of venom haemorrhagic action (in vivo), inhibition of venom necrotizing action, inhibition of venom defibrinogenating action, inhibition of venom induced paw edema, inhibition of venom induced mast cell degranulation, creatine kinase assay and assay for catalase activity. PLE was found to inhibit the venom induced haemorrhage in embryonated fertile chicken eggs. Administration of PLE and piperine significantly (p<0.01) inhibited venom induced lethality, haemorrhage, necrosis, defibrinogenation and inflammatory paw edema in mice in a dose dependent manner. PLE and piperine also significantly (p<0.01) reduced venom induced mast cell degranulation in rats. Venom induced decrease in catalase enzyme levels in mice kidney tissue and increase in creatine kinase enzyme levels in mice serum were significantly (p<0.01) reversed by administration of both PLE and piperine. PLE possesses good anti-snake venom properties and piperine is one of the compounds responsible for the effective venom neutralizing ability of the plant. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Joining of polymer-metal lightweight structures using self-piercing riveting (SPR) technique: Numerical approach and simulation results

Science.gov (United States)

Amro, Elias; Kouadri-Henni, Afia

2018-05-01

Restrictions in pollutant emissions dictated at the European Commission level in the past few years have urged mass production car manufacturers to engage rapidly several strategies in order to reduce significantly the energy consumption of their vehicles. One of the most relevant taken action is light-weighting of body in white (BIW) structures, concretely visible with the increased introduction of polymer-based composite materials reinforced by carbon/glass fibers. However, the design and manufacturing of such "hybrid" structures is limiting the use of conventional assembly techniques like resistance spot welding (RSW) which are not transferable as they are for polymer-metal joining. This research aims at developing a joining technique that would eventually enable the assembly of a sheet molding compound (SMC) polyester thermoset-made component on a structure composed of several high strength steel grades. The state of the art of polymer-metal joining techniques highlighted the few ones potentially able to respond to the industrial challenge, which are: structural bonding, self-piercing riveting (SPR), direct laser joining and friction spot welding (FSpW). In this study, the promising SPR technique is investigated. Modelling of SPR process in the case of polymer-metal joining was performed through the building of a 2D axisymmetric FE model using the commercial code Abaqus CAE 6.10-1. Details of the numerical approach are presented with a particular attention to the composite sheet for which Mori-Tanaka's homogenization method is used in order to estimate overall mechanical properties. Large deformations induced by the riveting process are enabled with the use of a mixed finite element formulation ALE (arbitrary Lagrangian-Eulerian). FE model predictions are compared with experimental data followed by a discussion.

Combustion Joining of Regolith Tiles for In-Situ Fabrication of Launch/Landing Pads on the Moon and Mars

Science.gov (United States)

Ferguson, Robert E.; Shafirovich, Evgeny; Mantovani, James G.

2017-01-01

To mitigate dust problems during launch/landing operations in lunar and Mars missions, it is desired to build solid pads on the surface. Recently, strong tiles have been fabricated from lunar regolith simulants using high-temperature sintering. The present work investigates combustion joining of these tiles through the use of exothermic intermetallic reactions. Specifically, nickel/aluminum (1:1 mole ratio) mixture was placed in a gap between the tiles sintered from JSC-1A lunar regolith simulant. Upon ignition by a laser, a self-sustained propagation of the combustion front over the mixture occurred. Joining was improved with increasing the tile thickness from 6.3 mm to 12.7 mm. The temperatures sufficient for melting the glass phase of JSC-1A were recorded for 12.7-mm tiles, which explains the observed better joining.

Development and characterization of HIP joining techniques for Si3N4 materials

International Nuclear Information System (INIS)

Sun Woo, J.

1991-09-01

The report deals with the development and optimization of reproducible techniques for joining Si 3 N 4 with Si 3 N 4 without interlayers consisting of other materials, applying hot isostatic pressing and vacuum plasma spraying. Furthermore, experiments are reported that have been performed in addition to the above-mentioned, for preparing Si 3 N 4 sintered specimens without sintering additives, applying the HIP technique. The resulting specimens have been tested for their joining characteristics, which are reported. All reported experiments have been performed varying essential parameters such as HIP temperature, pressure, holding time, surface roughness, and heat treatment. Every parameter has been examined individually for its effect on the bonding strength of the prepared Si 3 N 4 -Si 3 N 4 joint, applying 4P bending tests at room temperature and at 1200deg C. (orig./MM) [de

Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire)

Science.gov (United States)

Mathieu, Alexandre; Shabadi, Rajashekar; Deschamps, Alexis; Suery, Michel; Matteï, Simone; Grevey, Dominique; Cicala, Eugen

2007-04-01

Joining steel with aluminum involving the fusion of one or both materials is possible by laser beam welding technique. This paper describes a method, called laser braze welding, which is a suitable process to realize this structure. The main problem with thermal joining of steel/aluminum assembly with processes such as TIG or MIG is the formation of fragile intermetallic phases, which are detrimental to the mechanical performances of such joints. Braze welding permits a localized fusion of the materials resulting in a limitation on the growth of fragile phases. This article presents the results of a statistical approach for an overlap assembly configuration using a filler wire composed of 85% Zn and 15% Al. Tensile tests carried on these assemblies demonstrate a good performance of the joints. The fracture mechanisms of the joints are analyzed by a detailed characterization of the seams.

The Use of Explosive Forming for Fastening and Joining Structural and Pressure Components

Science.gov (United States)

Schroeder, J. W.

1985-01-01

Explosive expansion of tubes into tubesheets has been used for over 20 years in the fabrication and repair of shell and tube heat exchangers. The use of explosives to perform these expansions has offered several distinct advantages over other methods. First, the process is fast and economical and can be performed with minimal training of personnel. Secondly, explosive forming does not cause the deleterious metallurgical effects which often result from other forming operations. In addition, the process can be performed remotely without the need for sophisticated handling equipment. The expansion of tubes into tubesheets is only one of many possible fastening and joining applications for which explosive forming can be used to achieve highly successful results. The explosive forming process and where it has been used are described. In addition, some possible adaptations to other joining applications are identified and discussed.

Cognitive development in Silver-Russell syndrome: a sibling-controlled study.

Science.gov (United States)

Noeker, Meinolf; Wollmann, Hartmut A

2004-05-01

This study examined cognitive development in Silver-Russell syndrome (SRS), a condition with intrauterine growth retardation, persisting short stature, and specific stigmata. Neuropsychological function and cognitive abilities were assessed in a sample of 36 children with SRS (21 males, 15 females; mean age 7 years 6 months, SD 2 years 8 months; age range 3 to 12 years) and 25 normally developing siblings (mean age 8 years 6 months, SD 2 years 7 months; age range 3 to 12 years) using the Kaufman Assessment Battery for Children. Special measures were taken to control for confounding factors and sample bias. Mean overall IQ score in the total SRS sample (95.7, SD 10.63), as measured by the Mental Processing Composite Scale, was significantly reduced (p=0.021) compared with test norms (IQ 100, SD 15), indicating a moderate cognitive impairment. Subscale analysis revealed some specific deficiencies. However, these cannot be attributed to an established category of specific learning disorder. The mean score in the Achievement Scale (91.25, SD 14.92), which is more sensitive to educational influences, showed stronger deficits (p=0.001). The sibling control group achieved a slightly better mean IQ score (104.20, SD 12.32) than test norms (p=0.10). Direct analysis of paired differences between the subsample of children with SRS and a sibling among the control group (n=25) revealed a significant mean difference of 8.08 IQ points (p=0.011). Risk factor analysis revealed that cognitive development is not associated with birth length (p=0.404), birthweight (p=0.820), growth hormone therapy (p=0.810), phenotypic severity (p=0.828), or sex (p=0.880). Two children with maternal uniparental disomy for the entire chromosome 7 had markedly lower IQ scores (81 and 84 respectively). In contrast to the few previous findings, children with SRS show only moderate, but significant, impairments in cognitive outcome, which are more striking in our sample when compared with siblings than

Fork-join and data-driven execution models on multi-core architectures: Case study of the FMM

KAUST Repository

Amer, Abdelhalim

2013-01-01

Extracting maximum performance of multi-core architectures is a difficult task primarily due to bandwidth limitations of the memory subsystem and its complex hierarchy. In this work, we study the implications of fork-join and data-driven execution models on this type of architecture at the level of task parallelism. For this purpose, we use a highly optimized fork-join based implementation of the FMM and extend it to a data-driven implementation using a distributed task scheduling approach. This study exposes some limitations of the conventional fork-join implementation in terms of synchronization overheads. We find that these are not negligible and their elimination by the data-driven method, with a careful data locality strategy, was beneficial. Experimental evaluation of both methods on state-of-the-art multi-socket multi-core architectures showed up to 22% speed-ups of the data-driven approach compared to the original method. We demonstrate that a data-driven execution of FMM not only improves performance by avoiding global synchronization overheads but also reduces the memory-bandwidth pressure caused by memory-intensive computations. © 2013 Springer-Verlag.

FRESNO State joins exploration of new frontiers in physics

CERN Multimedia

2008-01-01

California State University, Fresno has joined a prestigious collaboration of top physicists, giving the Department of Physics' students, faculty and staff access to the most up-to-date information possible on new frontiers in the science for the next 15 years or longer. The program is the ATLAS (an acronym for A Toroidal LHC ApparatuS) Experiment, which makes use of the Large Hadron Collider (LHC) under construction at the European Organization for Nuclear Research (CERN) near Geneva, Switzerland. (CERN also gave birth to the World Wide Web.)

Ultrapulse welding: A new joining technique. [for automotive industry

Science.gov (United States)

Anderson, D. G.

1972-01-01

The ultrapulse process is a resistance welding process that utilizes unidirectional current of high magnitude for a very short time with a precisely controlled dynamic force pulse. Peak currents of up to 220,000 amperes for two to ten milliseconds are used with synchronized force pulses of up to nine thousand pounds. The welding current passing through the relatively high resistance of the interface between the parts that are being joined results in highly localized heating. Described is the UPW process as it applies to the automotive industry.

Pulsed Joining Of Body-In-White Components

Energy Technology Data Exchange (ETDEWEB)

Bonnen, John [Ford Motor Company, Dearborn, MI (United States)

2014-09-30

The objective of this project was to develop cost efficient high quality pulsed welding (PW) technology for joining 6xxx Aluminum and High Strength Steel (with tensile strength above 580MPa) components enabling broad usage of hydroformed parts and leading to substantial weight reduction of cars and trucks to reduce US demand on petroleum, lower carbon emissions and energy expenditures. In general, pulsed welding is a form of impact welding where two dissimilar metal pieces are joined by accelerating one to velocities exceeding 300m/s at which point the first piece strikes the second and forms a weld. In this work, two methods were used to accelerate the flyer material: Electro-Magnetic (EM) pulse and Electro-Hydraulic (EH) pulse launching. The advantage of pulsed welding techniques is that welds can be formed between two materials that cannot otherwise be welded: high strength aluminum and high strength steel. The technical objectives of the project included: 1) developing cost affordable production feasible tooling design for PW of 6xxx aluminum to High Strength steel with strengths above 580MPa; 2) demonstrating that fabricated joints can exceed the required service load strength initially at the coupon level and then at the component level; 3) developing fundamental understanding of the mechanisms of joint formation and conditions leading to formation of high quality PW joint; and 4) creating a numerical model predicting the tooling and electric discharge parameters necessary for the joint formation and that satisfy the targeted strength parameters. The project successfully developed: 1) EM and EH pulsed welds between high strength aluminum with tensile strengths exceeding 240MPa and steels exceeding 580MPa; 2) pulsed welds of extrusions with strengths exceeding project requirements; 3) EM and EH flyer launch models and 4) weld interface formation models. However, the grant holder, Ford Motor Company, could see no path to commercialization and the work was

High-resolution seismic-reflection imaging 25 years of change in I-70 sinkhole, Russell County, Kansas

Science.gov (United States)

Miller, R.D.; Steeples, D.W.; Lambrecht, J.L.; Croxton, N.

2006-01-01

Time-lapse seismic reflection imaging improved our understanding of the consistent, gradual surface subsidence ongoing at two sinkholes in the Gorham Oilfield discovered beneath a stretch of Interstate Highway 70 through Russell and Ellis Counties in Kansas in 1966. With subsidence occurring at a rate of around 10 cm per year since discovery, monitoring has been beneficial to ensure public safety and optimize maintenance. A miniSOSIE reflection survey conducted in 1980 delineated the affected subsurface and successfully predicted development of a third sinkhole at this site. In 2004 and 2005 a high-resolution vibroseis survey was completed to ascertain current conditions of the subsurface, rate and pattern of growth since 1980, and potential for continued growth. With time and improved understanding of the salt dissolution affected subsurface in this area it appears that these features represent little risk to the public from catastrophic failure. However, from an operational perspective the Kansas Department of Transportation should expect continued subsidence, with future increases in surface area likely at a slightly reduced vertical rate. Seismic characteristics appear empirically consistent with gradual earth material compaction/settling. ?? 2005 Society of Exploration Geophysicists.

12 CFR Appendix G to Part 360 - Deposit-Customer Join File Structure

Science.gov (United States)

2010-01-01

..._Code Relationship CodeThe code indicating how the customer is related to the account. Possible values... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Deposit-Customer Join File Structure G Appendix... GENERAL POLICY RESOLUTION AND RECEIVERSHIP RULES Pt. 360, App. G Appendix G to Part 360—Deposit-Customer...

Cosmonaut Aleksey Leonov joins belly dancer on stage at Folklife Festival

Science.gov (United States)

1974-01-01

Cosmonaut Aleksey A. Leonov, in one of the lighter moments of activity involving Soviet Cosmonauts and American Astronauts, joins a belly dancer on stage as several visitors to weekend activity at the site of San Antonio's HemisFair look on. Leonov is commander of the Soviet Apollo Soyuz Test Project (ASTP) crew. The Lebanese dancing was just one feature among many during the Texas Folklife Festival.

Thermal characterisation of ceramic/metal joining techniques for fusion applications using X-ray tomography

Energy Technology Data Exchange (ETDEWEB)

Evans, Ll.M., E-mail: llion.evans@ccfe.ac.uk [School of Materials, University of Manchester, Grosvenor Street, Manchester M1 7HS (United Kingdom); Margetts, L. [School of Earth, Atmospheric and Environmental Sciences, University of Manchester, Williamson Building, Manchester M13 9PL (United Kingdom); Casalegno, V. [Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, I-10129 Torino (Italy); Leonard, F.; Lowe, T.; Lee, P.D. [School of Materials, University of Manchester, Grosvenor Street, Manchester M1 7HS (United Kingdom); Schmidt, M.; Mummery, P.M. [School of Mechanical, Aerospace and Civil Engineering (MACE), University of Manchester, Manchester M13 9PL (United Kingdom)

2014-06-15

This work investigates the thermal performance of four novel CFC–Cu joining techniques. Two involve direct casting and brazing of Cu onto a chromium modified CFC surface, the other two pre-coat a brazing alloy with chromium using galvanisation and sputtering processes. The chromium carbide layer at the interface has been shown to improve adhesion. Thermal conductivity across the join interface was measured by laser flash analysis. X-ray tomography was performed to investigate micro-structures that might influence the thermal behaviour. It was found that thermal conductivity varied by up to 72%. Quantification of the X-ray tomography data showed that the dominant feature in reducing thermal conductivity was the lateral spread of voids at the interface. Correlations were made to estimate the extent of this effect.

Austria Declares Intent To Join ESO

Science.gov (United States)

2008-04-01

At a press conference today at the University of Vienna's Observatory, the Austrian Science Minister Johannes Hahn announced the decision by the Austrian Government to seek membership of ESO from 1 July this year. ESO PR Photo 11/08 ESO PR Photo 11/08 Announcing Austria's Intent to Join ESO Said Minister Hahn: "With membership of ESO, Austria's scientists will receive direct access to the world's leading infrastructure in astronomy. This strengthens Austria as a place for research and provides an opportunity for young researchers to continue their work from here. With this move, Austria takes an important step in the reinforcement of Europe's science and research infrastructure." The decision constitutes a major breakthrough for Austrian scientists who have argued for membership of ESO for many years. Seeking membership in ESO also marks a step towards the further development of the European Research and Innovation Area, an important element of Europe's so-called Lisbon Strategy. "ESO welcomes the Austrian bid to join our organisation. I salute the Austrian Government for taking this important step and look forward to working closely with our Austrian friends and colleagues in the years to come," commented the ESO Director General, Tim de Zeeuw. For Austrian astronomers, ESO membership means not only unrestricted access to ESO's world-leading observational facilities including the world's most advanced optical telescope, the Very Large Telescope, and full participation in the quasi-global ALMA project, but also the possibility to participate on a par with their European colleagues in the future projects of ESO, including the realisation of ESO's Extremely Large Telescope project (E-ELT), which is currently in the design phase. All these projects require some of the most advanced technologies in key areas such as optics, detectors, lightweight structures, etc. Austrian participation in ESO opens the door for Austrian industry and major research institutes of the

Parallel multi-join query optimization algorithm for distributed sensor network in the internet of things

Science.gov (United States)

Zheng, Yan

2015-03-01

Internet of things (IoT), focusing on providing users with information exchange and intelligent control, attracts a lot of attention of researchers from all over the world since the beginning of this century. IoT is consisted of large scale of sensor nodes and data processing units, and the most important features of IoT can be illustrated as energy confinement, efficient communication and high redundancy. With the sensor nodes increment, the communication efficiency and the available communication band width become bottle necks. Many research work is based on the instance which the number of joins is less. However, it is not proper to the increasing multi-join query in whole internet of things. To improve the communication efficiency between parallel units in the distributed sensor network, this paper proposed parallel query optimization algorithm based on distribution attributes cost graph. The storage information relations and the network communication cost are considered in this algorithm, and an optimized information changing rule is established. The experimental result shows that the algorithm has good performance, and it would effectively use the resource of each node in the distributed sensor network. Therefore, executive efficiency of multi-join query between different nodes could be improved.

An empirical study on SAJQ (Sorting Algorithm for Join Queries

Directory of Open Access Journals (Sweden)

Hassan I. Mathkour

2010-06-01

Full Text Available Most queries that applied on database management systems (DBMS depend heavily on the performance of the used sorting algorithm. In addition to have an efficient sorting algorithm, as a primary feature, stability of such algorithms is a major feature that is needed in performing DBMS queries. In this paper, we study a new Sorting Algorithm for Join Queries (SAJQ that has both advantages of being efficient and stable. The proposed algorithm takes the advantage of using the m-way-merge algorithm in enhancing its time complexity. SAJQ performs the sorting operation in a time complexity of O(nlogm, where n is the length of the input array and m is number of sub-arrays used in sorting. An unsorted input array of length n is arranged into m sorted sub-arrays. The m-way-merge algorithm merges the sorted m sub-arrays into the final output sorted array. The proposed algorithm keeps the stability of the keys intact. An analytical proof has been conducted to prove that, in the worst case, the proposed algorithm has a complexity of O(nlogm. Also, a set of experiments has been performed to investigate the performance of the proposed algorithm. The experimental results have shown that the proposed algorithm outperforms other Stable–Sorting algorithms that are designed for join-based queries.

Selective joining technique for high power electronics; Selektive Verbindungstechnik fuer die Leistungselektronik

Energy Technology Data Exchange (ETDEWEB)

Fehrenbach, Manfred [EUTECT GmbH, Dusslingen (Germany)

2012-11-01

Stringent demands are placed on the quality, reliability and workmanship of electronic components in modern automotive electronics, high-performance LEDs (HLEDs) and regenerative electrical power generation. Automated selective integrated circuit packaging processes are increasingly becoming irreplaceable. Integrated circuit packing can be performed by means of mini-wave, laser, iron or hot-bar soldering, as well as the micro welding process. In addition to the modification of existing technologies, this also requires new joining technologies and test strategies for quality assurance. Interdisciplinary expertise with regard to process technology and system function is therefore essential for sound process assurance, maximum effectiveness and added value in the joining process. This article addresses the processing of THT electronics assemblies in the areas of printed-circuit boards, LEDs, flex foils, leadframes, hybrids and special types. Using high-power LED processes as examples, integrated circuit packaging is described for IMS, Osram Philips, Samsung and further LED designs, as well as printed-circuit board, flex-foil and jumper connections to the associated LED heat sinks. (orig.)

Effect of joining the sectioned implant-supported prosthesis on the peri-implant strain generated in simulated mandibular model

OpenAIRE

Ipsha Singh; K Chandrasekharan Nair; Jayakar Shetty

2017-01-01

Aim: The aim of this study is to evaluate the strain developed in simulated mandibular model before and after the joining of an implant-supported screw-retained prosthesis by different joining techniques, namely, arc welding, laser welding, and soldering. Materials and Methods: A specimen simulating a mandibular edentulous ridge was fabricated in heat-cured acrylic resin. 4-mm holes were drilled in the following tooth positions; 36, 33, 43, 46. Implant analogs were placed in the holes. Un...

Detection and Repair of Ionizing Radiation-Induced DNA Double Strand Breaks: New Developments in Nonhomologous End Joining

International Nuclear Information System (INIS)

Wang, Chen; Lees-Miller, Susan P.

2013-01-01

DNA damage can occur as a result of endogenous metabolic reactions and replication stress or from exogenous sources such as radiation therapy and chemotherapy. DNA double strand breaks are the most cytotoxic form of DNA damage, and defects in their repair can result in genome instability, a hallmark of cancer. The major pathway for the repair of ionizing radiation-induced DSBs in human cells is nonhomologous end joining. Here we review recent advances on the mechanism of nonhomologous end joining, as well as new findings on its component proteins and regulation

Detection and Repair of Ionizing Radiation-Induced DNA Double Strand Breaks: New Developments in Nonhomologous End Joining

Energy Technology Data Exchange (ETDEWEB)

Wang, Chen [Departments of Biochemistry and Molecular Biology and Oncology, and Southern Alberta Cancer Research Institute, University of Calgary, Calgary (Canada); Lees-Miller, Susan P., E-mail: leesmill@ucalgary.ca [Departments of Biochemistry and Molecular Biology and Oncology, and Southern Alberta Cancer Research Institute, University of Calgary, Calgary (Canada)

2013-07-01

DNA damage can occur as a result of endogenous metabolic reactions and replication stress or from exogenous sources such as radiation therapy and chemotherapy. DNA double strand breaks are the most cytotoxic form of DNA damage, and defects in their repair can result in genome instability, a hallmark of cancer. The major pathway for the repair of ionizing radiation-induced DSBs in human cells is nonhomologous end joining. Here we review recent advances on the mechanism of nonhomologous end joining, as well as new findings on its component proteins and regulation.

Symmetric bends how to join two lengths of cord

CERN Document Server

Miles, Roger E

1995-01-01

A bend is a knot securely joining together two lengths of cord (or string or rope), thereby yielding a single longer length. There are many possible different bends, and a natural question that has probably occurred to many is: "Is there a 'best' bend and, if so, what is it?"Most of the well-known bends happen to be symmetric - that is, the two constituent cords within the bend have the same geometric shape and size, and interrelationship with the other. Such 'symmetric bends' have great beauty, especially when the two cords bear different colours. Moreover, they have the practical advantage o

Joining Movement Sequences: Modified Dynamic Movement Primitives for Robotics Applications Exemplified on Handwriting

DEFF Research Database (Denmark)

Kulvicius, Tomas; Ning, K.; Tamosiunaite, M.

2012-01-01

to simulated handwriting generation, which are also shown on a robot, where an adaptive algorithm is used to learn trajectories from human demonstration. These results demonstrate that the new method is a feasible alternative for joining of movement sequences, which has a high potential for all robotics...

Guided elastic waves produced by a periodically joined interface in a rock mass

CSIR Research Space (South Africa)

Yenwong Fai

2012-09-01

Full Text Available on Computational and Applied Mechanics SACAM2012 Johannesburg, South Africa, 3−5 September 2012 c©SACAM Guided Elastic Waves Produced by a Periodically Joined Interface in a Rock Mass A.S. Yenwong Fai School of Physics University of the Witwatersrand Johannesburg...

Gaussian Random Fields Methods for Fork-Join Network with Synchronization Constraints

Science.gov (United States)

2014-12-22

substantial efforts were dedicated to the study of the max-plus recursions [21, 3, 12]. More recently, Atar et al. [2] have studied a fork-join...feedback and NES, Atar et al. [2] show that a dynamic priority discipline achieves throughput optimal- ity asymptotically in the conventional heavy...2011) Patient flow in hospitals: a data-based queueing-science perspective. Submitted to Stochastic Systems, 20. [2] R. Atar , A. Mandelbaum and A

Joining of Cu-Mg-Mn Aluminum Alloy with Linear Friction Welding

OpenAIRE

A. Medvedev; V. Bychkov; A. Selivanov; Yu. J. Ershova; B. Bolshakov; I.V. Alexаndrov; F. F. Musin

2014-01-01

Al-Cu-Mg-Mn alloy samples were joined together with linear friction welding in two conditions, as is, without pretreatment, and after etching the welding interface. The effect of the welding interface condition was evaluated based on microstructure analysis, microhardness and tensile testing at room temperature. Also, the temperature distribution during welding was estimated with an analytical one-dimensional heat conduction model of the welding process and welding process data

Base Stock Policy in a Join-Type Production Line with Advanced Demand Information

Science.gov (United States)

Hiraiwa, Mikihiko; Tsubouchi, Satoshi; Nakade, Koichi

Production control such as the base stock policy, the kanban policy and the constant work-in-process policy in a serial production line has been studied by many researchers. Production lines, however, usually have fork-type, join-type or network-type figures. In addition, in most previous studies on production control, a finished product is required at the same time as arrival of demand at the system. Demand information is, however, informed before due date in practice. In this paper a join-type (assembly) production line under base stock control with advanced demand information in discrete time is analyzed. The recursive equations for the work-in-process are derived. The heuristic algorithm for finding appropriate base stock levels of all machines at short time is proposed and the effect of advanced demand information is examined by simulation with the proposed algorithm. It is shown that the inventory cost can decreases with little backlogs by using the appropriate amount of demand information and setting appropriate base stock levels.

Joining thick section aluminum to steel with suppressed FeAl intermetallic formation via friction stir dovetailing

Energy Technology Data Exchange (ETDEWEB)

Reza-E-Rabby, Md.; Ross, Kenneth; Overman, Nicole R.; Olszta, Matthew J.; McDonnell, Martin; Whalen, Scott A.

2018-04-01

A new solid-phase technique called friction stir dovetailing (FSD) has been developed for joining thick section aluminum to steel. In FSD, mechanical interlocks are formed at the aluminum-steel interface and are reinforced by metallurgical bonds where intermetallic growth has been uniquely suppressed. Lap shear testing shows superior strength and extension at failure compared to popular friction stir approaches where metallurgical bonding is the only joining mechanism. High resolution microscopy revealed the presence of a 40-70 nm interlayer having a composition of 76.4 at% Al, 18.4 at% Fe, and 5.2 at% Si, suggestive of limited FeAl3 intermetallic formation.

Joining of molybdenum disilicide to stainless steel using amorphous metal brazes - residual stress analysis

Energy Technology Data Exchange (ETDEWEB)

Vaidya, R.U.; Gallegos, D.E.; Kautz, D.D. [Los Alamos National Lab. (United States)

2007-07-01

Molybdenum disilicide (MoSi{sub 2})/stainless steel 316 L joints were produced by high temperature brazing using a cobalt-based metallic-glass (METGLAS trademark 2714A). Successful joining was completed in two different ways; either by feeding excess braze into the braze gap upon heating or by constraining the MoSi{sub 2}/stainless steel assembly with an alumina (Al{sub 2}O{sub 3}) fixture during the heating cycle. These steps were necessary to ensure the production of a high quality void free joint. Residual stress measurements were completed on these joints. Indentation results show higher tensile residual stresses in the stainless steel for the joint with the external constraint, in comparison to the unconstrained state. In contrast, the compressive residual stresses in the MoSi{sub 2} (as measured by X-ray diffraction) were lower in the constrained state relative to the unconstrained state. These results and a lack of residual stress balance indicate that the stress state in the braze is significantly different under the two joining conditions and the volume of the braze plays an important role in the development of the residual stresses. Push-out tests carried out on these joints gave higher joint strengths in the unconstrained as compared to the constrained condition. The results of this study have important implications on the selection of the appropriate joining process (use of constraint versus extra braze). (orig.)

Electrically conductive ceramics and new joining technology for applications in HTR engineering

International Nuclear Information System (INIS)

Hille, Carmen; Lippmann, Wolfgang; Hurtado, Antonio

2012-01-01

Ceramic constructional components are quite extensively required for operation of high-temperature nuclear reactors. Functional ceramics, in addition to constructional ceramics, are increasingly coming into the focus of research. Ceramic materials are predestined for use at high temperatures and in corrosive atmospheres. Modification of silicon carbide (SiC) by targeted doping, for instance, produces a suitable material for the production of heating conductors and thermoelectric generators. As a construction material, silicon carbide (SiC) is especially interesting due to its very good thermal, mechanical and radiological properties. SiC, furthermore, performs well when activated by neutron irradiation, with the induced activation subsiding after only a few hours (). This property vector makes it an ideal starting material for use in a wide range of functional elements in high-temperature power engineering, particularly in high-temperature nuclear reactor engineering (e.g. V/HTR) including thermochemical plants for hydrogen generation or Synfuel production. In principle, it is possible to produce all-ceramic assemblies consisting of a thermoelectric generator and a sensor that can provide reliable measurement signals under extreme conditions in the high-temperature range without external power supply. This paper explains the feasibility of laser-joining such modified non-oxide ceramics, how to make electrically conductive joints, and thus, how to design complex assemblies. The parameters required for an optimal laser process to join ceramic materials were determined in extensive preliminary experiments. These investigations focused on the specific electrical resistances and optical properties. Specifically developed brazing fillers were fine-tuned so that the joints of the ceramics improved in terms of their physical interactions, chemical reactions and ability to bond or key chemically and mechanically with the ceramic surfaces. Thereby, the electrical

Electrically conductive ceramics and new joining technology for applications in HTR engineering

Energy Technology Data Exchange (ETDEWEB)

Hille, Carmen, E-mail: carmen.hille@ilkdresden.de [Dresden University of Technology (TU Dresden), Institute of Power Engineering, Chair of Hydrogen Technology and Nuclear Power Engineering, George-Baehr-Str. 3b, D-01062 Dresden (Germany); Lippmann, Wolfgang, E-mail: wolfgang.lippmann@tu-dresden.de [Dresden University of Technology (TU Dresden), Institute of Power Engineering, Chair of Hydrogen Technology and Nuclear Power Engineering, George-Baehr-Str. 3b, D-01062 Dresden (Germany); Hurtado, Antonio, E-mail: antonio.hurtado@tu-dresden.de [Dresden University of Technology (TU Dresden), Institute of Power Engineering, Chair of Hydrogen Technology and Nuclear Power Engineering, George-Baehr-Str. 3b, D-01062 Dresden (Germany)

2012-10-15

Ceramic constructional components are quite extensively required for operation of high-temperature nuclear reactors. Functional ceramics, in addition to constructional ceramics, are increasingly coming into the focus of research. Ceramic materials are predestined for use at high temperatures and in corrosive atmospheres. Modification of silicon carbide (SiC) by targeted doping, for instance, produces a suitable material for the production of heating conductors and thermoelectric generators. As a construction material, silicon carbide (SiC) is especially interesting due to its very good thermal, mechanical and radiological properties. SiC, furthermore, performs well when activated by neutron irradiation, with the induced activation subsiding after only a few hours (). This property vector makes it an ideal starting material for use in a wide range of functional elements in high-temperature power engineering, particularly in high-temperature nuclear reactor engineering (e.g. V/HTR) including thermochemical plants for hydrogen generation or Synfuel production. In principle, it is possible to produce all-ceramic assemblies consisting of a thermoelectric generator and a sensor that can provide reliable measurement signals under extreme conditions in the high-temperature range without external power supply. This paper explains the feasibility of laser-joining such modified non-oxide ceramics, how to make electrically conductive joints, and thus, how to design complex assemblies. The parameters required for an optimal laser process to join ceramic materials were determined in extensive preliminary experiments. These investigations focused on the specific electrical resistances and optical properties. Specifically developed brazing fillers were fine-tuned so that the joints of the ceramics improved in terms of their physical interactions, chemical reactions and ability to bond or key chemically and mechanically with the ceramic surfaces. Thereby, the electrical

Alternative end-joining catalyzes robust IgH locus deletions and translocations in the combined absence of ligase 4 and Ku70.

Science.gov (United States)

Boboila, Cristian; Jankovic, Mila; Yan, Catherine T; Wang, Jing H; Wesemann, Duane R; Zhang, Tingting; Fazeli, Alex; Feldman, Lauren; Nussenzweig, Andre; Nussenzweig, Michel; Alt, Frederick W

2010-02-16

Class switch recombination (CSR) in B lymphocytes is initiated by introduction of multiple DNA double-strand breaks (DSBs) into switch (S) regions that flank immunoglobulin heavy chain (IgH) constant region exons. CSR is completed by joining a DSB in the donor S mu to a DSB in a downstream acceptor S region (e.g., S gamma1) by end-joining. In normal cells, many CSR junctions are mediated by classical nonhomologous end-joining (C-NHEJ), which employs the Ku70/80 complex for DSB recognition and XRCC4/DNA ligase 4 for ligation. Alternative end-joining (A-EJ) mediates CSR, at reduced levels, in the absence of C-NHEJ, even in combined absence of Ku70 and ligase 4, demonstrating an A-EJ pathway totally distinct from C-NHEJ. Multiple DSBs are introduced into S mu during CSR, with some being rejoined or joined to each other to generate internal switch deletions (ISDs). In addition, S-region DSBs can be joined to other chromosomes to generate translocations, the level of which is increased by absence of a single C-NHEJ component (e.g., XRCC4). We asked whether ISD and S-region translocations occur in the complete absence of C-NHEJ (e.g., in Ku70/ligase 4 double-deficient B cells). We found, unexpectedly, that B-cell activation for CSR generates substantial ISD in both S mu and S gamma1 and that ISD in both is greatly increased by the absence of C-NHEJ. IgH chromosomal translocations to the c-myc oncogene also are augmented in the combined absence of Ku70 and ligase 4. We discuss the implications of these findings for A-EJ in normal and abnormal DSB repair.

Sorting by Cuts, Joins, and Whole Chromosome Duplications.

Science.gov (United States)

Zeira, Ron; Shamir, Ron

2017-02-01

Genome rearrangement problems have been extensively studied due to their importance in biology. Most studied models assumed a single copy per gene. However, in reality, duplicated genes are common, most notably in cancer. In this study, we make a step toward handling duplicated genes by considering a model that allows the atomic operations of cut, join, and whole chromosome duplication. Given two linear genomes, [Formula: see text] with one copy per gene and [Formula: see text] with two copies per gene, we give a linear time algorithm for computing a shortest sequence of operations transforming [Formula: see text] into [Formula: see text] such that all intermediate genomes are linear. We also show that computing an optimal sequence with fewest duplications is NP-hard.

Complete Status Report Documenting Development of Friction Stir Welding for Joining Thin Wall Tubing of ODS Alloys

Energy Technology Data Exchange (ETDEWEB)

Hoelzer, David T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bunn, Jeffrey R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gussev, Maxim N. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-08-01

The development of friction stir welding (FSW) for joining thin sections of the advanced oxide dispersion strengthened (ODS) 14YWT ferritic alloy was initiated in Fuel Cycle Research and Development (FCRD), now the Nuclear Technology Research and Development (NTRD), in 2015. The first FSW experiment was conducted in late FY15 and successfully produced a bead-on-plate stir zone (SZ) on a 1 mm thick plate of 14YWT (SM13 heat). The goal of this research task is to ultimately demonstrate that FSW is a feasible method for joining thin wall (0.5 mm thick) tubing of 14YWT.

Human DNA ligase III bridges two DNA ends to promote specific intermolecular DNA end joining

Science.gov (United States)

Kukshal, Vandna; Kim, In-Kwon; Hura, Gregory L.; Tomkinson, Alan E.; Tainer, John A.; Ellenberger, Tom

2015-01-01

Mammalian DNA ligase III (LigIII) functions in both nuclear and mitochondrial DNA metabolism. In the nucleus, LigIII has functional redundancy with DNA ligase I whereas LigIII is the only mitochondrial DNA ligase and is essential for the survival of cells dependent upon oxidative respiration. The unique LigIII zinc finger (ZnF) domain is not required for catalytic activity but senses DNA strand breaks and stimulates intermolecular ligation of two DNAs by an unknown mechanism. Consistent with this activity, LigIII acts in an alternative pathway of DNA double strand break repair that buttresses canonical non-homologous end joining (NHEJ) and is manifest in NHEJ-defective cancer cells, but how LigIII acts in joining intermolecular DNA ends versus nick ligation is unclear. To investigate how LigIII efficiently joins two DNAs, we developed a real-time, fluorescence-based assay of DNA bridging suitable for high-throughput screening. On a nicked duplex DNA substrate, the results reveal binding competition between the ZnF and the oligonucleotide/oligosaccharide-binding domain, one of three domains constituting the LigIII catalytic core. In contrast, these domains collaborate and are essential for formation of a DNA-bridging intermediate by adenylated LigIII that positions a pair of blunt-ended duplex DNAs for efficient and specific intermolecular ligation. PMID:26130724

Joining of Dissimilar alloy Sheets (Al 6063&AISI 304 during Resistance Spot Welding Process: A Feasibility Study for Automotive industry

Directory of Open Access Journals (Sweden)

Reddy Sreenivasulu

2014-12-01

Full Text Available Present design trends in automotive manufacture have shifted emphasis to alternative lightweight materials in order to achieve higher fuel efficiency and to bring down vehicle emission. Although some other joining techniques are more and more being used, spot welding still remains the primary joining method in automobile manufacturing so far. Spot welds for automotive applications should have a sufficiently large diameter, so that nugget pullout mode is the dominant failure mode. Interfacial mode is unacceptable due to its low load carrying and energy absorption capability. Strength tests with different static loading were performed in, to reveal the failure mechanisms for the lap-shear geometry and the cross-tension geometry. Based on the literature survey performed, venture into this work was amply motivated by the fact that a little research work has been conducted to joining of dissimilar materials like non ferrous to ferrous. Most of the research works concentrated on joining of different materials like steel to steel or aluminium alloy to aluminium alloy by resistance spot welding. In this work, an experimental study on the resistance spot weldability of aluminium alloy (Al 6063 and austenitic stainless steel (AISI304 sheets, which are lap joined by using a pedestal type resistance spot welding machine. Welding was conducted using a 45-deg truncated cone copper electrode with 10-mm face diameter. The weld nugget diameter, force estimation under lap shear test and T – peel test were investigated using digital type tensometer attached with capacitive displacement transducer (Mikrotech, Bangalore, Model: METM2000ER1. The results shows that joining of Al 6063 and AISI 304 thin sheets by RSW method are feasible for automotive structural joints where the loads are below 1000N act on them, it is observed that by increasing the spots per unit length, then the joint with standing strength to oppose failure is also increased linearly incase of

Enumeration for spanning trees and forests of join graphs based on the combinatorial decomposition

Directory of Open Access Journals (Sweden)

Sung Sik U

2016-10-01

Full Text Available This paper discusses the enumeration for rooted spanning trees and forests of the labelled join graphs $K_m+H_n$ and $K_m+K_{n,p}$, where $H_n$ is a graph with $n$ isolated vertices. 

Cut-and-join operators and N=4 super Yang-Mills

International Nuclear Information System (INIS)

Brown, T.W.

2010-02-01

We show which multi-trace structures are compatible with the symmetrisation of local operators in N=4 super Yang-Mills when they are organised into representations of the global symmetry group. Cut-and-join operators give the non-planar expansion of correlation functions of these operators in the free theory. Using these techniques we find the 1/N corrections to the quarter-BPS operators which remain protected at weak coupling. We also present a new way of counting these chiral ring operators using the Weyl group S N . (orig.)

Cut-and-join operators and N=4 super Yang-Mills

Energy Technology Data Exchange (ETDEWEB)

Brown, T W [DESY, Hamburg (Germany). Theory Group

2010-02-15

We show which multi-trace structures are compatible with the symmetrisation of local operators in N=4 super Yang-Mills when they are organised into representations of the global symmetry group. Cut-and-join operators give the non-planar expansion of correlation functions of these operators in the free theory. Using these techniques we find the 1/N corrections to the quarter-BPS operators which remain protected at weak coupling. We also present a new way of counting these chiral ring operators using the Weyl group S{sub N}. (orig.)

Double Strand Break Repair, one mechanism can hide another: Alternative non-homologous end joining

International Nuclear Information System (INIS)

Rass, E.; Grabarz, A.; Bertrand, P.; Lopez, B.S.

2012-01-01

DNA double strand breaks are major cytotoxic lesions encountered by the cells. They can be induced by ionizing radiation or endogenous stress and can lead to genetic instability. Two mechanisms compete for the repair of DNA double strand breaks: homologous recombination and non-homologous end joining (NHEJ). Homologous recombination requires DNA sequences homology and is initiated by single strand resection. Recently, advances have been made concerning the major steps and proteins involved in resection. NHEJ, in contrast, does not require sequence homology. The existence of a DNA double strand break repair mechanism, independent of KU and ligase IV, the key proteins of the canonical non homologous end joining pathway, has been revealed lately and named alternative non homologous end joining. The hallmarks of this highly mutagenic pathway are deletions at repair junctions and frequent use of distal micro-homologies. This mechanism is also initiated by a single strand resection of the break. The aim of this review is firstly to present recent data on single strand resection, and secondly the alternative NHEJ pathway, including a discussion on the fidelity of NHEJ. Based on current knowledge, canonical NHEJ does not appear as an intrinsically mutagenic mechanism, but in contrast, as a conservative one. The structure of broken DNA ends actually dictates the quality repair of the alternative NHEJ and seems the actual responsible for the mutagenesis attributed beforehand to the canonical NHEJ. The existence of this novel DNA double strand breaks repair mechanism needs to be taken into account in the development of radiosensitizing strategies in order to optimise the efficiency of radiotherapy. (authors)

Joining of yttria-tetragonal zirconia polycrystal with an aluminum-zirconium alloy

International Nuclear Information System (INIS)

Rathner, R.C.; Green, D.J.

1990-01-01

Specimens of yttria-tetragonal zirconia polycrystal (Y-TZP) have been joined with an Al-5.8 wt% Zr alloy at temperatures of 900 degrees C and above. The braze alloy contained large needlelike precipitates of the intermetallic phase Al 3 Sr. It is shown that these large precipitates can aid in strengthening of the joint, especially if they are close to the interface. With decreasing layer thickness, the strengths increased with values as high as 420 MPa

FMEA and FTA Analyses of the Adhesive Joining Process using Electrically Conductive Adhesives

Directory of Open Access Journals (Sweden)

E. Povolotskaya

2012-01-01

Full Text Available This paper introduces a formulation of appropriate risk estimation methods that can be used for improving of processes in the electronics area. Two risk assessment methods have been chosen with regard to the specifics of adhesive joining based on electrically conductive adhesives. The paper provides a combination of a failure mode and effect analysis (FMEA and fault tree analysis (FTA for optimizing of the joining process. Typical features and failures of the process are identified. Critical operations are found and actions for avoiding failures in these actions are proposed. A fault treehas been applied to the process in order to get more precise information about the steps and operations in the process, and the relations between these operations. The fault tree identifies potential failures of the process. Then the effects of the failures have been estimated by the failure mode and effect analysis method. All major differences between failure mode and effect analysis and fault tree analysis are defined and there is a discussion about how to use the two techniquescomplement each other and achieve more efficient results.

Joining of AZ31 and AZ91 Mg alloys by friction stir welding

Directory of Open Access Journals (Sweden)

B. Ratna Sunil

2015-12-01

Full Text Available Two dissimilar magnesium (Mg alloy sheets, one with low aluminium (AZ31 and another with high aluminium (AZ91 content, were successfully joined by friction stir welding (FSW. The effect of process parameters on the formation of hot cracks was investigated. A sound metallurgical joint was obtained at optimized process parameters (1400 rpm with 25 mm/min feed which contained fine grains and distributed β (Mg17Al12 phase within the nugget zone. An increasing trend in the hardness measurements has also confirmed more amount of dissolution of aluminium within the nugget zone. A sharp interface between nugget zone and thermo mechanical affected zone (TMAZ was clearly noticed at the AZ31 Mg alloy side (advancing but not on the AZ91 Mg alloy side (retreating. From the results it can be concluded that FSW can be effectively used to join dissimilar metals, particularly difficult to process metals such as Mg alloys, and hot cracking can be completely eliminated by choosing appropriate process parameters to achieve sound joint.

Joining aluminum to titanium alloy by friction stir lap welding with cutting pin

International Nuclear Information System (INIS)

Wei, Yanni; Li, Jinglong; Xiong, Jiangtao; Huang, Fu; Zhang, Fusheng; Raza, Syed Hamid

2012-01-01

Aluminum 1060 and titanium alloy Ti–6Al–4V plates were lap joined by friction stir welding. A cutting pin of rotary burr made of tungsten carbide was employed. The microstructures of the joining interface were observed by scanning electron microscopy. Joint strength was evaluated by a tensile shear test. During the welding process, the surface layer of the titanium plate was cut off by the pin, and intensively mixed with aluminum situated on the titanium plate. The microstructures analysis showed that a visible swirl-like mixed region existed at the interface. In this region, the Al metal, Ti metal and the mixed layer of them were all presented. The ultimate tensile shear strength of joint reached 100% of 1060Al that underwent thermal cycle provided by the shoulder. - Highlights: ► FSW with cutting pin was successfully employed to form Al/Ti lap joint. ► Swirl-like structures formed due to mechanical mixing were found at the interface. ► High-strength joints fractured at Al suffered thermal cycle were produced.

Revolutionary composite joining method; from an aerospace thesis research to founding a new company

NARCIS (Netherlands)

Bergman, A.

2014-01-01

In 2011, Peter Madlener started his graduation thesis at the Aerospace Engineering faculty on a new joining technology for composite sandwich panels. The promising results gained in this thesis led to the foundation of MOCS: a young company with the ambitious goal of introducing a revolutionary

Leadership, Governance

Science.gov (United States)

: Environmental Documents, Reports LANL Home Calendar Search Contacts About » Leadership, Governance Leadership national security and energy challenges. Leadership, Governance Ethics, Accountability Los Alamos National . Director's Office terry wallace in leadership, governance Director Terry C. Wallace, Jr. Terry C. Wallace, Jr

FeCrAl and Zr alloys joined using hot isostatic pressing for fusion energy applications

International Nuclear Information System (INIS)

Park, Dong Jun; Kim, Hyun Gil; Park, Jeong Yong; Jung, Yang Il; Park, Jung Hwan; Koo, Yang Hyun

2016-01-01

Highlights: • FeCrAl and Zr alloys were successfully joined by hot isostatic pressing (HIP). • The thickness of diffusion layer increased with an increase in HIP temperature. • Significant inter-diffusion was observed for HIP at 1150 °C. • Maximum joint strength was achieved at HIP temperature of 700 °C. - Abstract: FeCrAl and Zr alloys were joined by a hot isostatic pressing (HIP) method for fusion energy applications. The optimum conditions for the joining process were studied. The HIP temperatures were varied from 700 to 1050 °C. The mechanical properties of the HIPed samples were evaluated by four-point bending and tensile tests. The FeCrAl and Zr alloys HIPed at 700 °C showed higher joint strength than the other samples. The joint strength decreased with an increase in the HIP temperature from 700 to 950 °C and significantly dropped at 1050 °C. Transmission electron microscopy, scanning electron microscopy, and optical microscopy were used to characterize the joints and interface region of the HIPed samples. The joints appeared to be tightly bonded and no intermetallic compounds or gaps were observed at the interface for HIP temperatures up to 950 °C. A diffusion layer formed at the interface and its thickness increased with the HIP temperature. HIP at 1050 °C, on the other hand, resulted in significant inter-diffusion and formation of brittle inter-metallic compounds at the interface.

THE RIGHT TO FORM AND TO JOIN TRADE UNIONS AS DEFINED IN INTERNATIONAL LEGAL INSTRUMENTS

Directory of Open Access Journals (Sweden)

Andon Majhoshev

2017-07-01

Full Text Available The right of workers to form and to join trade unions is one of the most important international labour standards. This means that employees, no matter where they are employed (public or private sector, have the right to form their own organizations (unions. Apart from the employees, employers also have the right to form and join in employers’ associations. The right of employees and employers to organize is based on the following principles: voluntariness, autonomy and democracy. The general objective of the formation of unions and employers’ associations is to protect the rights and interests of members of the union and the employers’ association, as well as their promotion in an organized manner. The provision and guarantee of union and workers' rights are guaranteed by a number of international and regional legal instruments (conventions, recommendations, regulations, such as ILO, UN, Council of Europe and the European Union, which will be analysed further in this paper. The main objective arising from these documents is to improve the position of workers and their protection. Within the paper, we will also analyse the most important legal acts of the Republic of Macedonia concerning the right to join unions. By analysing the content of the national labour legislation, we will determine the extent to which the international labour law is being implemented. Moreover, the paper will analyse the basic principles underlying union organization and association.

Joining psychiatric care and faith healing in a prayer camp in Ghana: randomised trial.

Science.gov (United States)

Ofori-Atta, A; Attafuah, J; Jack, H; Baning, F; Rosenheck, R

2018-01-01

Care of people with serious mental illness in prayer camps in low-income countries generates human rights concerns and ethical challenges for outcome researchers. Aims To ethically evaluate joining traditional faith healing with psychiatric care including medications (Clinical trials.gov identifier NCT02593734). Residents of a Ghana prayer camp were randomly assigned to receive either indicated medication for schizophrenia or mood disorders along with usual prayer camp activities (prayers, chain restraints and fasting) (n = 71); or the prayer camp activities alone (n = 68). Masked psychologists assessed Brief Psychiatric Rating Scale (BPRS) outcomes at 2, 4 and 6 weeks. Researchers discouraged use of chaining, but chaining decisions remained under the control of prayer camp staff. Total BPRS symptoms were significantly lower in the experimental group (P = 0.003, effect size -0.48). There was no significant difference in days in chains. Joining psychiatric and prayer camp care brought symptom benefits but, in the short-run, did not significantly reduce days spent in chains. Declaration of interest None.

Effect of joining the sectioned implant-supported prosthesis on the peri-implant strain generated in simulated mandibular model.

Science.gov (United States)

Singh, Ipsha; Nair, K Chandrasekharan; Shetty, Jayakar

2017-01-01

The aim of this study is to evaluate the strain developed in simulated mandibular model before and after the joining of an implant-supported screw-retained prosthesis by different joining techniques, namely, arc welding, laser welding, and soldering. A specimen simulating a mandibular edentulous ridge was fabricated in heat-cured acrylic resin. 4-mm holes were drilled in the following tooth positions; 36, 33, 43, 46. Implant analogs were placed in the holes. University of California, Los Angeles, abutment was attached to the implant fixture. Eight strain gauges were attached to the acrylic resin model. Six similar models were made. Implant-supported screw-retained fixed prosthesis was fabricated in nickel-chromium alloy. A load of 400 N was applied on the prosthesis using universal testing machine. Resultant strain was measured in each strain gauge. All the prostheses were sectioned at the area between 36 and 33, 33 and 43, and 43 and 46 using 35 micrometer carborundum disc, and strain was measured in each strain gauge after applying a load of 400 N on the prosthesis. Specimens were joined by arc welding, soldering, and laser welding. After joining, a load of 400 N was applied on each prosthesis and the resultant strain was measured in each strain gauge. Highest mean strain values were recorded before sectioning of the prostheses (889.9 microstrains). Lowest mean strain values were recorded after sectioning the prosthesis and before reuniting it (225.0 microstrains). Sectioning and reuniting the long-span implant prosthesis was found to be a significant factor in influencing the peri-implant strain.

Experimental study on joining of AA6063 and AISI 1040 steel

Science.gov (United States)

Hynes, N. Rajesh Jesudoss; Raja, S.

2018-05-01

Feasibility of joining of dissimilar metals with different physical, chemical and thermal properties such as AA6063 alloy and AISI 1040 steel is worthwhile study, since it has tremendous applications in all most of all engineering domains. The mechanism of bonding is studied using scanning electron microscopy. Impact strength of AA2024/AISI joints, axial shortening distance, micro hardness distribution and joint strength are determined. Micro hardness profile shows increased hardness value at the joint interface, due to grain refinement.

Generic multiset programming with discrimination-based joins and symbolic Cartesian products

DEFF Research Database (Denmark)

Henglein, Fritz; Larsen, Ken Friis

2010-01-01

This paper presents GMP, a library for generic, SQL-style programming with multisets. It generalizes the querying core of SQL in a number of ways: Multisets may contain elements of arbitrary first-order data types, including references (pointers), recur- sive data types and nested multisets......: symbolic (term) repre- sentations of multisets, specifically for Cartesian products, for facilitating dynamic symbolic computation, which intersperses algebraic simplification steps with conventional data pro- cessing; and discrimination-based joins, a generic technique for computing equijoins based...

CCI and CI Join Hands:A Better Supply Chain with More Innovations on Cotton Fabrics

Institute of Scientific and Technical Information of China (English)

Tom; Xue

2010-01-01

Cotton Council International("CCI")and Cotton Incorporated("CI") joined forces again,from October 19-22,2010 at Intertextile Shanghai,to promote natural fiber-U.S.cotton.As global textile strategic partners,both organizations were bringing together alliances through the cotton

Use of a cobalt-based metallic glass for joining MoSi{sub 2} to stainless steel

Energy Technology Data Exchange (ETDEWEB)

Vaidya, R.U.; Rangaswamy, P.; Misra, A.; Gallegos, D.E.; Castro, R.G.; Petrovic, J.J. [Los Alamos National Lab., NM (United States). Materials Science and Technology Div.; Butt, D.P. [Florida Univ., Gainesville, FL (United States). Dept. of Materials Science and Engineering

2002-07-01

The successful use of a cobalt-based metallic glass in joining molybdenum disilicide (MoSi{sub 2}) to stainless steel 316L was demonstrated. Such joints are being investigated for sensor tube applications in glass melting operations. The cobalt-based metallic-glass (METGLAS{sup TM} 2714A) was found to wet the MoSi{sub 2} and stainless steel surfaces and provide high quality joints. Joining was completed at 1050 C for 60 minutes in two different ways; either by feeding excess braze into the braze gap upon heating or by constraining the MoSi{sub 2}/stainless steel assembly with an alumina (Al{sub 2}O{sub 3}) fixture during the heating cycle. These steps were necessary to ensure the production of a high quality void free joint. Post-brazing metallographic evaluations coupled with quantitative elemental analysis indicated the presence of a Co-Cr-Si ternary phase with CoSi and CoSi{sub 2} precipitates within the braze. The residual stresses in these molybdenum disilicide (MoSi{sub 2})/stainless steel 316 L joints were evaluated using X-ray diffraction and instrumented indentation techniques. These measurements revealed that significant differences are induced in the residual stresses in MoSi{sub 2} and stainless steel depending on the joining technique employed. Push-out tests were carried out on these joints to evaluate the joint strength. (orig.)

Correction of the axial and appendicular deformities in a patient with Silver-Russel syndrome

Directory of Open Access Journals (Sweden)

Ali Al Kaissi

2015-01-01

Full Text Available Background: Scoliosis and limb length discrepancy are the major orthopaedic abnormalities in patients with Silver-Russel syndrome (SRS. In this paper, we describe a series of orthopaedic interventions in an attempt to overcome the progressive pathologic mechanism in a 7-year-old girl who manifested the full phenotypic features of SRS. Materials and Methods: Unilateral hip dislocation, progressive scoliosis and limb length discrepancy have been dealt with through Pemberton osteotomy, spinal fusion and Taylor-Spatial-Frame respectively. Results: In order to correct the axial and the appendicular deformities a sum of seven operations were performed (between the age of 7 years and 13 years. Pemberton osteotomy was performed to treat dislocation of her right hip because of developmental dysplasia of the hip. Spinal fusion (spondylodesis of segments Th3-L5 was done to correct her scoliosis. And, to overcome the limb length discrepancy of 15-cm we used Taylor-Spatial-Frame with percutaneous distal corticotomy of the femur, and the proximal tibia, as well as the foot, were performed. We were able to minimize the limb length discrepancy to 5 cm. The girl became able to walk with the aid of a below knee orthosis and through lifting the left limb with 5-cm height shoe. Conclusion: Limb lengthening surgery in patients with multiple malformation complex as in SRS is associated with high recurrence risk because of; muscular hypotonia, overtubulation of the long bones, and the poor bone regenerative quality. Our interventions were principally directed towards improving the cosmetic outlook, functions and the biomechanics.

The Effect of Temperature and Rotational Speed on Structure and Mechanical Properties of Cast Cu Base Alloy (Cu-Al-Si-Fe) Welded by Semisolid Stir Joining Method

Science.gov (United States)

Ferasat, Keyvan; Aashuri, Hossein; Kokabi, Amir Hossein; Shafizadeh, Mahdi; Nikzad, Siamak

2015-12-01

Semisolid stir joining has been under deliberation as a possible method for joining of copper alloys. In this study, the effect of temperature and rotational speed of stirrer on macrostructure evaluation and mechanical properties of samples were investigated. Optical microscopy and X-ray diffraction were performed for macro and microstructural analysis. A uniform micro-hardness profile was attained by semisolid stir joining method. The ultimate shear strength and bending strength of welded samples were improved in comparison with the cast sample. There is also lower area porosity in welded samples than the cast metal. The mechanical properties were improved by increasing temperature and rotational speed of the joining process.

Mycobacterium tuberculosis and Mycobacterium marinum non-homologous end-joining proteins can function together to join DNA ends in Escherichia coli.

Science.gov (United States)

Wright, Douglas G; Castore, Reneau; Shi, Runhua; Mallick, Amrita; Ennis, Don G; Harrison, Lynn

2017-03-01

Mycobacterium tuberculosis and Mycobacterium smegmatis express a Ku protein and a DNA ligase D and are able to repair DNA double strand breaks (DSBs) by non-homologous end-joining (NHEJ). This pathway protects against DNA damage when bacteria are in stationary phase. Mycobacterium marinum is a member of this mycobacterium family and like M. tuberculosis is pathogenic. M. marinum lives in water, forms biofilms and infects fish and frogs. M. marinum is a biosafety level 2 (BSL2) organism as it can infect humans, although infections are limited to the skin. M. marinum is accepted as a model to study mycobacterial pathogenesis, as M. marinum and M. tuberculosis are genetically closely related and have similar mechanisms of survival and persistence inside macrophage. The aim of this study was to determine whether M. marinum could be used as a model to understand M. tuberculosis NHEJ repair. We identified and cloned the M. marinum genes encoding NHEJ proteins and generated E. coli strains that express the M. marinum Ku (Mm-Ku) and ligase D (Mm-Lig) individually or together (LHmKumLig strain) from expression vectors integrated at phage attachment sites in the genome. We demonstrated that Mm-Ku and Mm-Lig are both required to re-circularize Cla I-linearized plasmid DNA in E. coli. We compared repair of strain LHmKumLig with that of an E. coli strain (BWKuLig#2) expressing the M. tuberculosis Ku (Mt-Ku) and ligase D (Mt-Lig), and found that LHmKumLig performed 3.5 times more repair and repair was more accurate than BWKuLig#2. By expressing the Mm-Ku with the Mt-Lig, or the Mt-Ku with the Mm-Lig in E. coli, we have shown that the NHEJ proteins from M. marinum and M. tuberculosis can function together to join DNA DSBs. NHEJ repair is therefore conserved between the two species. Consequently, M. marinum is a good model to study NHEJ repair during mycobacterial pathogenesis. © The Author 2016. Published by Oxford University Press on behalf of the UK Environmental Mutagen

7th February 2011 - Scottish Cabinet Secretary for Education and Lifelong Learning M. Russell MSP signing the guest book with Beams Department Head P. Collier and Adviser J. Ellis

CERN Multimedia

Maximilien Brice

2011-01-01

01-17:Scottish Cabinet Secretary for Education and Lifelong Learning M. Russell MSP signing the guest book with Beams Department Head P. Collier and Adviser J. Ellis 18-22: Teachers and Pupils signing the guest book 23-27: visiting the CERN control centre with P. Collier 28-32: visiting the LHCb underground area 33-74: visitng the ATLAS underground area Other members of the delegation: Chief Scientific Adviser to the Scottish Government and Chair in Molecular and Cell Biology at the University of Aberdeen A. Glover; Assistant Private Secretary M. Gallagher; Associate Director Institute for Gravitational Research, University of Glasgow J.Hough.

Race, language, and mental evolution in Darwin's descent of man.

Science.gov (United States)

Alter, Stephen G

2007-01-01

Charles Darwin was notoriously ambiguous in his remarks about the relationship between human evolution and biological race. He stressed the original unity of the races, yet he also helped to popularize the notion of a racial hierarchy filling the gaps between the highest anthropoids and civilized Europeans. A focus on Darwin's explanation of how humans initially evolved, however, shows that he mainly stressed not hierarchy but a version of humanity's original mental unity. In his book The Descent of Man, Darwin emphasized a substantial degree of mental development (including the incipient use of language) in the early, monogenetic phase of human evolution. This development, he argued, necessarily came before primeval man's numerical increase, geographic dispersion, and racial diversification, because only thus could one explain how that group was able to spread at the expense of rival ape-like populations. This scenario stood opposed to a new evolutionary polygenism formulated in the wake of Darwin's Origin of Species by his ostensible supporters Alfred Russel Wallace and Ernst Haeckel. Darwin judged this outlook inadequate to the task of explaining humanity's emergence. (c) 2007 Wiley Periodicals, Inc.

Optimization of Laser Transmission Joining Process Parameters on Joint Strength of PET and 316 L Stainless Steel Joint Using Response Surface Methodology

Directory of Open Access Journals (Sweden)

Shashi Prakash Dwivedi

2014-01-01

Full Text Available The objective of the present work is to study the effects of laser power, joining speed, and stand-off distance on the joint strength of PET and 316 L stainless steel joint. The process parameters were optimized using response methodology for achieving good joint strength. The central composite design (CCD has been utilized to plan the experiments and response surface methodology (RSM is employed to develop mathematical model between laser transmission joining parameters and desired response (joint strength. From the ANOVA (analysis of variance, it was concluded that laser power is contributing more and it is followed by joining speed and stand-off distance. In the range of process parameters, the result shows that laser power increases and joint strength increases. Whereas joining speed increases, joint strength increases. The joint strength increases with the increase of the stand-off distance until it reaches the center value; the joint strength then starts to decrease with the increase of stand-off distance beyond the center limit. Optimum values of laser power, joining speed, and stand-off distance were found to be 18 watt, 100 mm/min, and 2 mm to get the maximum joint strength (predicted: 88.48 MPa. There was approximately 3.37% error in the experimental and modeled results of joint strength.

Effect of joining the sectioned implant-supported prosthesis on the peri-implant strain generated in simulated mandibular model

Directory of Open Access Journals (Sweden)

Ipsha Singh

2017-01-01

Full Text Available Aim: The aim of this study is to evaluate the strain developed in simulated mandibular model before and after the joining of an implant-supported screw-retained prosthesis by different joining techniques, namely, arc welding, laser welding, and soldering. Materials and Methods: A specimen simulating a mandibular edentulous ridge was fabricated in heat-cured acrylic resin. 4-mm holes were drilled in the following tooth positions; 36, 33, 43, 46. Implant analogs were placed in the holes. University of California, Los Angeles, abutment was attached to the implant fixture. Eight strain gauges were attached to the acrylic resin model. Six similar models were made. Implant-supported screw-retained fixed prosthesis was fabricated in nickel-chromium alloy. A load of 400 N was applied on the prosthesis using universal testing machine. Resultant strain was measured in each strain gauge. All the prostheses were sectioned at the area between 36 and 33, 33 and 43, and 43 and 46 using 35 micrometer carborundum disc, and strain was measured in each strain gauge after applying a load of 400 N on the prosthesis. Specimens were joined by arc welding, soldering, and laser welding. After joining, a load of 400 N was applied on each prosthesis and the resultant strain was measured in each strain gauge. Results: Highest mean strain values were recorded before sectioning of the prostheses (889.9 microstrains. Lowest mean strain values were recorded after sectioning the prosthesis and before reuniting it (225.0 microstrains. Conclusions: Sectioning and reuniting the long-span implant prosthesis was found to be a significant factor in influencing the peri-implant strain.

Fresno State joins CERN-related program to explore cutting edge physics

CERN Multimedia

2008-01-01

California State University, Fresno has joined a collaboration of top physicists to work with what scientists believe will be the driving force behind high-energy physics for the foreseeable future. The program is the ATLAS (an acronym for A Toroidal LHC ApparatuS) experiment, which makes use of the Large Hadron Collider under construction at the European Organization for Nuclear Research (CERN) near Geneva, Switzerland. Fresno State says it is the only one of the 23 California State University system schools participating in the LHC program and CERN.

Enabling lightweight designs by a new laser based approach for joining aluminum to steel

Science.gov (United States)

Brockmann, Rüdiger; Kaufmann, Sebastian; Kirchhoff, Marc; Candel-Ruiz, Antonio; Müllerschön, Oliver; Havrilla, David

2015-03-01

As sustainability is an essential requirement, lightweight design becomes more and more important, especially for mobility. Reduced weight ensures more efficient vehicles and enables better environmental impact. Besides the design, new materials and material combinations are one major trend to achieve the required weight savings. The use of Carbon Fiber Reinforced Plastics (abbr. CFRP) is widely discussed, but so far high volume applications are rarely to be found. This is mainly due to the fact that parts made of CFRP are much more expensive than conventional parts. Furthermore, the proper technologies for high volume production are not yet ready. Another material with a large potential for lightweight design is aluminum. In comparison to CFRP, aluminum alloys are generally more affordable. As aluminum is a metallic material, production technologies for high volume standard cutting or joining applications are already developed. In addition, bending and deep-drawing can be applied. In automotive engineering, hybrid structures such as combining high-strength steels with lightweight aluminum alloys retain significant weight reduction but also have an advantage over monolithic aluminum - enhanced behavior in case of crash. Therefore, since the use of steel for applications requiring high mechanical properties is unavoidable, methods for joining aluminum with steel parts have to be further developed. Former studies showed that the use of a laser beam can be a possibility to join aluminum to steel parts. In this sense, the laser welding process represents a major challenge, since both materials have different thermal expansion coefficients and properties related to the behavior in corrosive media. Additionally, brittle intermetallic phases are formed during welding. A promising approach to welding aluminum to steel is based on the use of Laser Metal Deposition (abbr. LMD) with deposit materials in the form of powders. Within the present work, the advantages of this

Manufacturing and joining technologies for helium cooled divertors

International Nuclear Information System (INIS)

Aktaa, J.; Basuki, W.W.; Weber, T.; Norajitra, P.; Krauss, W.; Konys, J.

2014-01-01

Highlights: • The manufacturing and joining technologies developed at KIT for helium cooled divertors are reviewed and critically discussed. • Various technologies have been pursued and further developed aiming divertor components with very high quality and sufficient reliability. • Very promising routes have been found for which however still R and D works are necessary. • Technologies developed are also useful for other divertor and even blanket concepts, particularly those with tungsten armor. - Abstract: In the helium cooled (HC) divertor, developed at KIT for a fusion power plant, tungsten has been selected as armor as well as structural material due to its crucial properties: high melting point, very low sputtering yield, good thermal conductivity, high temperature strength, low thermal expansion and low activation. Thereby the armor tungsten is attached to the structural tungsten by thermally conductive joint. Due to the brittleness of tungsten at low temperatures its use as structural material is limited to the high temperature part of the component and a structural joint to the reduced activation ferritic martensitic steel EUROFER97 is foreseen. Hence, to realize the selected hybrid material concept reliable tungsten–steel and tungsten–tungsten joints have been developed and will be reported in this paper. In addition, the modular design of the HC divertor requires tungsten armor tiles and tungsten structural thimbles to be manufactured in high numbers with very high quality. Due to the high strength and low temperature brittleness of tungsten special manufacturing techniques need to be developed for the production of parts with no cavities inside and/or surface flaws. The main achievement in developing the respective manufacturing technologies will be presented and discussed. To achieve the objectives mentioned above various manufacturing and joining technologies are pursued. Their later applicability depends on the level of development

Refractory metal joining for first wall applications

International Nuclear Information System (INIS)

Cadden, C.H.; Odegard, B.C.

2000-01-01

The potential use of high temperature coolant (e.g. 900 deg. C He) in first wall structures would preclude the applicability of copper alloy heat sink materials and refractory metals would be potential replacements. Brazing trials were conducted in order to examine techniques to join tungsten armor to high tungsten (90-95 wt%) or molybdenum TZM heat sink materials. Palladium-, nickel- and zirconium-based filler metals were investigated using brazing temperatures ranging from 1000 deg. C to 1275 deg. C. Palladium-nickel and palladium-cobalt braze alloys were successful in producing generally sound metallurgical joints in tungsten alloy/tungsten couples, although there was an observed tendency for the pure tungsten armor material to exhibit grain boundary cracking after bonding. The zirconium- and nickel-based filler metals produced defect-containing joints, specifically cracking and porosity, respectively. The palladium-nickel braze alloy produced sound joints in the Mo TZM/tungsten couple. Substitution of a lanthanum oxide-containing, fine-grained tungsten material (for the pure tungsten) eliminated the observed tungsten grain boundary cracking

Refractory metal joining for first wall applications

Energy Technology Data Exchange (ETDEWEB)

Cadden, C.H. E-mail: chcadde@sandia.gov; Odegard, B.C

2000-12-01

The potential use of high temperature coolant (e.g. 900 deg. C He) in first wall structures would preclude the applicability of copper alloy heat sink materials and refractory metals would be potential replacements. Brazing trials were conducted in order to examine techniques to join tungsten armor to high tungsten (90-95 wt%) or molybdenum TZM heat sink materials. Palladium-, nickel- and zirconium-based filler metals were investigated using brazing temperatures ranging from 1000 deg. C to 1275 deg. C. Palladium-nickel and palladium-cobalt braze alloys were successful in producing generally sound metallurgical joints in tungsten alloy/tungsten couples, although there was an observed tendency for the pure tungsten armor material to exhibit grain boundary cracking after bonding. The zirconium- and nickel-based filler metals produced defect-containing joints, specifically cracking and porosity, respectively. The palladium-nickel braze alloy produced sound joints in the Mo TZM/tungsten couple. Substitution of a lanthanum oxide-containing, fine-grained tungsten material (for the pure tungsten) eliminated the observed tungsten grain boundary cracking.

Refractory metal joining for first wall applications

Science.gov (United States)

Cadden, C. H.; Odegard, B. C.

2000-12-01

The potential use of high temperature coolant (e.g. 900°C He) in first wall structures would preclude the applicability of copper alloy heat sink materials and refractory metals would be potential replacements. Brazing trials were conducted in order to examine techniques to join tungsten armor to high tungsten (90-95 wt%) or molybdenum TZM heat sink materials. Palladium-, nickel- and zirconium-based filler metals were investigated using brazing temperatures ranging from 1000°C to 1275°C. Palladium-nickel and palladium-cobalt braze alloys were successful in producing generally sound metallurgical joints in tungsten alloy/tungsten couples, although there was an observed tendency for the pure tungsten armor material to exhibit grain boundary cracking after bonding. The zirconium- and nickel-based filler metals produced defect-containing joints, specifically cracking and porosity, respectively. The palladium-nickel braze alloy produced sound joints in the Mo TZM/tungsten couple. Substitution of a lanthanum oxide-containing, fine-grained tungsten material (for the pure tungsten) eliminated the observed tungsten grain boundary cracking.

CERN clubs join the fiftieth anniversary party!

CERN Document Server

2004-01-01

CERN's clubs are planning to celebrate the Organization's 50th anniversary by organising a variety of special events. It's raining projects! CERN's clubs have chosen to celebrate the Organization's Golden Jubilee, each in its own style, by organising a whole host of anniversary events. While the Cine-Club continues to screen films made in the Member States on Thursday evenings, other clubs are organising special races and tournaments to honour CERN's 50th year. The CERN Rugby Club led the way in early April when it hosted a children's tournament which brought the Laboratory firmly into the view of its many young participants. On 24 April, the Cycling Club moves to centre stage as it takes its members on a unique 50-km discovery trip around the countryside above the tunnel of the future LHC. The Croquet Club, the Running Club, the Horse Riding Club and the Golf Club will all be joining the party in May and June. After that, football, softball, cycling, pétanque and sailing are just some of the items on a sp...

Massively Parallel Sort-Merge Joins in Main Memory Multi-Core Database Systems

OpenAIRE

Martina-Cezara Albutiu, Alfons Kemper, Thomas Neumann

2012-01-01

Two emerging hardware trends will dominate the database system technology in the near future: increasing main memory capacities of several TB per server and massively parallel multi-core processing. Many algorithmic and control techniques in current database technology were devised for disk-based systems where I/O dominated the performance. In this work we take a new look at the well-known sort-merge join which, so far, has not been in the focus of research ...

Modelling the Asymmetric Volatility in Hog Prices in Taiwan : The Impact of Joining the WTO

NARCIS (Netherlands)

C-L. Chang (Chia-Lin); B-W. Huang (Bing-Wen); M-G. Chen (Meng-Gu)

2010-01-01

textabstractPrices in the hog industry in Taiwan are determined according to an auction system. There are significant differences in hog prices before, during and after joining the World Trade Organization (WTO). The paper models growth rates and volatility in daily hog prices in Taiwan from 23

Fork-join and data-driven execution models on multi-core architectures: Case study of the FMM

KAUST Repository

Amer, Abdelhalim; Maruyama, Naoya; Pericà s, Miquel; Taura, Kenjiro; Yokota, Rio; Matsuoka, Satoshi

2013-01-01

Extracting maximum performance of multi-core architectures is a difficult task primarily due to bandwidth limitations of the memory subsystem and its complex hierarchy. In this work, we study the implications of fork-join and data-driven execution

The endless tale of non-homologous end-joining.

Science.gov (United States)

Weterings, Eric; Chen, David J

2008-01-01

DNA double-strand breaks (DSBs) are introduced in cells by ionizing radiation and reactive oxygen species. In addition, they are commonly generated during V(D)J recombination, an essential aspect of the developing immune system. Failure to effectively repair these DSBs can result in chromosome breakage, cell death, onset of cancer, and defects in the immune system of higher vertebrates. Fortunately, all mammalian cells possess two enzymatic pathways that mediate the repair of DSBs: homologous recombination and non-homologous end-joining (NHEJ). The NHEJ process utilizes enzymes that capture both ends of the broken DNA molecule, bring them together in a synaptic DNA-protein complex, and finally repair the DNA break. In this review, all the known enzymes that play a role in the NHEJ process are discussed and a working model for the co-operation of these enzymes during DSB repair is presented.

Heritability and complex segregation analysis of deafness in Jack Russell Terriers

Directory of Open Access Journals (Sweden)

Strain George M

2007-11-01

Full Text Available Abstract Background The association between patterns of pigmentation and deafness in the dog has a long-documented history, with reports dating back over one hundred years. Long suspected of having a genetic basis, the search for loci with a pronounced influence in the expression of hearing loss in the dog has yet to be successful. No studies in the dog to date have found a possible influence of a specific colour locus associated with deafness. The present study is intended to evaluate the heritability of deafness in the Jack Russell Terrier (JRT, characterize the mode of inheritance, and evaluate the existence of a sex, coat colour, or coat texture influence on the expression of sensorineural deafness. Results The estimation of heritability of deafness in the JRT was 0.22 when deafness was considered a binary (normal/deaf trait and 0.31 when deafness was considered a three-category (normal/unilateral/bilateral deafness. The influence of coat colour in the incidence of JRT deafness was statistically significant, indicating that dogs with more white are more likely to be deaf. The influence of sex or coat texture was not statistically significant in the incidence of JRT deafness. Complex segregation analysis revealed a model of a single locus with a large effect on the binary measure of hearing loss is not supported. Conclusion This is the first attempt, to our knowledge, to characterize a genetic component responsible for deafness in the JRT. The heritability of deafness in the JRT was found to be 0.22 and 0.31 considering deafness to be a two-category or three-category trait, respectively. There appears to be an influence of coat colour on the expression of deafness. In an attempt to characterize the mode of inheritance of deafness in the JRT, a model of a single locus with a large effect on hearing loss is not supported with this data. Further study is needed to determine if a single locus may be influencing deafness in the JRT. While the

Joining of hybrid AA6063-6SiCp-3Grp composite and AISI 1030 steel by friction welding

Directory of Open Access Journals (Sweden)

N. Rajesh Jesudoss Hynes

2017-10-01

Full Text Available Joining of metals and aluminium hybrid metal matrix composites has significant applications in aviation, ship building and automotive industries. In the present work, investigation is carried out on Friction Welding of AISI 1030 steel and hybrid AA6063-6SiCp-3Grpcomposite, that are difficult to weld by fusion welding technique. Silicon carbide and graphite particle reinforced AA6063 matrix hybrid composite was developed successfully using stir casting method and the joining feasibility of AISI1030 steel with AA6063-6SiCp-3Grp hybrid composite was tried out by friction stud welding technique. During friction stage of welding process, the particulates (SiC & Graphite used for reinforcement, tend to increase the viscosity and lead to improper mixing of matrix and reinforcement. This eventually results in lower strength in dissimilar joints. To overcome this difficulty AA1100 interlayer is used while joining hybrid composite to AISI 1030 steel. Experimentation was carried out using Taguchi based design of experiments (DOE technique. Multiple regression methods were applied to understand the relationship between process parameters of the friction stud welding process. Micro structural examination reveals three separate zones namely fully plasticized zone, partially deformed zone and unaffected base material zone. Ultra fine dynamically recrystallized grains of about 341 nm were observed at the fully plasticized zone. EDX analysis confirms the presence of intermetallic compound Fe2Al5 at the joint interface. According to the experimental analysis using DOE, rotational speed and interlayer sheet thickness contribute about 39% and 36% respectively in determining the impact strength of the welded joints. It is found that joining with 0.5 mm interlayer sheet provides efficient joints. Developed regression model could be used to predict the axial shortening distance and impact strength of the welded joint with reasonable accuracy.

Joining the UN global compact in Spain: an institutional approach

Directory of Open Access Journals (Sweden)

Ainhoa Garayar Erro

2012-12-01

Full Text Available The aim of this study is to analyse the incentives for Spanish organisations that have adopted a voluntary code of conduct such as the United Nations Global Compact – GC. In the light of the sociological approach of neoinstitutional theory, we sought to determine the main isomorphic processes that result from joining the GC and factors of the institutional field that might undermine the legitimacy of organisations participating in this voluntary initiative.On the one hand, the main results, while not conclusive, showed that Spanish participants in the GC have more than one reason for joining the initiative. The study’s findings suggest that both institutional processes of mimetic isomorphism and normative isomorphism explain participation in the GC, which emphasizes the improvement in employee satisfaction, an improvement in customer satisfaction and also the fact of being part of sustainable development efforts.On the other hand, it can be asserted that the respondent organisations do not perceive major threats from the institutional environment that might undermine the legitimacy gained by joining the GC. Nonetheless, the Spanish organisations participating in the GC highlight the fact that the main institutional factor that might undermine the organization’s legitimacy is weak governance and corruption.RESUMENEl presente trabajo examina la incidencia que la adopción del Pacto Mundial de Naciones Unidas –PM– ha tenido en organizaciones españolas. En concreto, el objetivo es aportar evidencia sobre las motivaciones que impulsan a un grupo de entidades a participar en esta iniciativa voluntaria. Basándonos en el enfoque sociológico de la teoría neoinstitucional, analizamos los principales procesos de isomorfismo resultantes del proceso de adhesión, así como aquellos factores del entorno institucional que pueden llegar a mermar su legitimidad.Los resultados, aunque no concluyentes, muestran que las organizaciones espa

Massively Parallel Sort-Merge Joins in Main Memory Multi-Core Database Systems

OpenAIRE

Albutiu, Martina-Cezara; Kemper, Alfons; Neumann, Thomas

2012-01-01

Two emerging hardware trends will dominate the database system technology in the near future: increasing main memory capacities of several TB per server and massively parallel multi-core processing. Many algorithmic and control techniques in current database technology were devised for disk-based systems where I/O dominated the performance. In this work we take a new look at the well-known sort-merge join which, so far, has not been in the focus of research in scalable massively parallel mult...

Perceptions of house officers working in hospitals of Lahore about joining the field of anaesthesiology as a career.

Science.gov (United States)

Anjum, Sohail; Mahboob, Usman

2016-10-01

To determine the perceptions of house officers working in hospitals about joining anaesthesiology as a career. This quantitative, descriptive questionnaire-based study was carried out from September 2014 to February 2015 in 26 teaching hospitals of Lahore, Pakistan, and comprised house officers. Those with at least three months of working experience in anaesthesiology were included. They were approached in their respective departments and a validated self-reporting questionnaire was delivered to them and received back by hand. SPSS 16 was used for data analysis. Of the 73 house officers approached, 53(72.6%) responded; 35(66%) men and 18(33%) women. Overall, 25(47.16%) respondents refused to join anaesthesiology as a career and 27(50.94%) included it in their first three career choices. Moreover, 25(47.16%) cited minimal interaction with patient as a reason for not taking anaesthesia as a career choice; 29(56.6%) of the respondents believed an anaesthetist had no or little role in surgery. Change in attitude about anaesthesiology as a specialty after having an anaesthesia rotation was mentioned by 26(49.05%) respondents. House officers had reservations about joining anaesthesiology as a career. The findings are suggestive of a positive effect of anaesthesiology house job on house officers attitude about the specialty.

MS SQL Server 7.0 as a Platform for a Star Join Schema Data Warehouse

DEFF Research Database (Denmark)

Sørensen, Jens Otto; Alnor, Karl

1998-01-01

In this paper we construct a Star Join Schema and show how this schema can be created using the basic tools delivered with SQL Server 7.0. Major objectives are to keep the operational database unchanged so that data loading can be done without disturbing the business logic of the operational...

Joining Forces: The Chemical Biology-Medicinal Chemistry Continuum.

Science.gov (United States)

Plowright, Alleyn T; Ottmann, Christian; Arkin, Michelle; Auberson, Yves P; Timmerman, Henk; Waldmann, Herbert

2017-09-21

The scientific advances being made across all disciplines are creating ever-increasing opportunities to enhance our knowledge of biological systems and how they relate to human disease. One of the central driving forces in discovering new medicines is medicinal chemistry, where the design and synthesis of novel compounds has led to multiple drugs. Chemical biology, sitting at the interface of many disciplines, has now emerged as a major contributor to the understanding of biological systems and is becoming an integral part of drug discovery. Bringing chemistry and biology much closer and blurring the boundaries between disciplines is creating new opportunities to probe and understand biology; both disciplines play key roles and need to join forces and work together effectively to synergize their impact. The power of chemical biology will then reach its full potential and drive innovation, leading to the discovery of transformative medicines to treat patients. Advances in cancer biology and drug discovery highlight this potential. Copyright © 2017 Elsevier Ltd. All rights reserved.

Key technology for (V)HTR: laser beam joining of SiC

International Nuclear Information System (INIS)

Knorr, J.; Lippmann, W.; Reinecke, A.M.; Wolf, R.; Rasper, R.; Kerber, A.; Wolter, A.

2005-01-01

Laser beam joining has numerous advantages over other methods presently known. After having been developed successful for brazing silicon carbide for high temperature applications, this technology is now also available for silicon nitride. Thus the field of application of SiC and Si 3 N 4 which are very interesting materials for the nuclear sector is considerably extended thanks to this new technology. Ceramic encapsulation of fuel and absorber increases the margins for operation at very high temperatures. Additionally, without ceramic encapsulation of the main core components, it will be difficult to continue claiming non-catastrophic behaviour for the (V)HTR. (orig.)

XRCC1 suppresses somatic hypermutation and promotes alternative nonhomologous end joining in Igh genes.

Science.gov (United States)

Saribasak, Huseyin; Maul, Robert W; Cao, Zheng; McClure, Rhonda L; Yang, William; McNeill, Daniel R; Wilson, David M; Gearhart, Patricia J

2011-10-24

Activation-induced deaminase (AID) deaminates cytosine to uracil in immunoglobulin genes. Uracils in DNA can be recognized by uracil DNA glycosylase and abasic endonuclease to produce single-strand breaks. The breaks are repaired either faithfully by DNA base excision repair (BER) or mutagenically to produce somatic hypermutation (SHM) and class switch recombination (CSR). To unravel the interplay between repair and mutagenesis, we decreased the level of x-ray cross-complementing 1 (XRCC1), a scaffold protein involved in BER. Mice heterozygous for XRCC1 showed a significant increase in the frequencies of SHM in Igh variable regions in Peyer's patch cells, and of double-strand breaks in the switch regions during CSR. Although the frequency of CSR was normal in Xrcc1(+/-) splenic B cells, the length of microhomology at the switch junctions decreased, suggesting that XRCC1 also participates in alternative nonhomologous end joining. Furthermore, Xrcc1(+/-) B cells had reduced Igh/c-myc translocations during CSR, supporting a role for XRCC1 in microhomology-mediated joining. Our results imply that AID-induced single-strand breaks in Igh variable and switch regions become substrates simultaneously for BER and mutagenesis pathways.

Social Pharmacy and Clinical Pharmacy-Joining Forces.

Science.gov (United States)

Almarsdottir, Anna Birna; Granas, Anne Gerd

2015-12-22

This commentary seeks to define the areas of social pharmacy and clinical pharmacy to uncover what they have in common and what still sets them apart. Common threats and challenges of the two areas are reviewed in order to understand the forces in play. Forces that still keep clinical and social pharmacy apart are university structures, research traditions, and the management of pharmacy services. There are key (but shrinking) differences between clinical and social pharmacy which entail the levels of study within pharmaceutical sciences, the location in which the research is carried out, the choice of research designs and methods, and the theoretical foundations. Common strengths and opportunities are important to know in order to join forces. Finding common ground can be developed in two areas: participating together in multi-disciplinary research, and uniting in a dialogue with internal and external key players in putting forth what is needed for the profession of pharmacy. At the end the question is posed, "What's in a name?" and we argue that it is important to emphasize what unifies the families of clinical pharmacy and social pharmacy for the benefit of both fields, pharmacy in general, and society at large.

Altered kinetics of nonhomologous end joining and class switch recombination in ligase IV-deficient B cells.

Science.gov (United States)

Han, Li; Yu, Kefei

2008-11-24

Immunoglobulin heavy chain class switch recombination (CSR) is believed to occur through the generation and repair of DNA double-strand breaks (DSBs) in the long and repetitive switch regions. Although implied, the role of the major vertebrate DSB repair pathway, nonhomologous end joining (NHEJ), in CSR has been controversial. By somatic gene targeting of DNA ligase IV (Lig4; a key component of NHEJ) in a B cell line (CH12F3) capable of highly efficient CSR in vitro, we found that NHEJ is required for efficient CSR. Disruption of the Lig4 gene in CH12F3 cells severely inhibits the initial rate of CSR and causes a late cell proliferation defect under cytokine stimulation. However, unlike V(D)J recombination, which absolutely requires NHEJ, CSR accumulates to a substantial level in Lig4-null cells. The data revealed a fast-acting NHEJ and a slow-acting alterative end joining of switch region breaks during CSR.

Non-homologous end-joining genes are not inactivated in human radiation-induced sarcomas with genomic instability

International Nuclear Information System (INIS)

Lefevre, S.H.; Coquelle, A.; Gonin-Laurent, N.

2005-01-01

DNA double-strand break (DSB) repair pathways are implicated in the maintenance of genomic stability. However the alterations of these pathways, as may occur in human tumor cells with strong genomic instability, remain poorly characterized. We analyzed the loss of heterozygosity (LOH) and the presence of mutations for a series of genes implicated in DSB repair by non-homologous end-joining in five radiation-induced sarcomas devoid of both active Tp53 and Rb1. LOH was recurrently observed for 8 of the 9 studied genes (KU70, KU80, XRCC4, LIG4, Artemis, MRE11, RAD50, NBS1) but not for DNA-PKcs. No mutation was found in the remaining allele of the genes with LOH and the mRNA expression did not correlate with the allelic status. Our findings suggest that non-homologous end-joining repair pathway alteration is unlikely to be involved in the high genomic instability observed in these tumors. (author)

Mechanical joining of materials with limited ductility: Analysis of process-induced defects

Science.gov (United States)

Jäckel, M.; Coppieters, S.; Hofmann, M.; Vandermeiren, N.; Landgrebe, D.; Debruyne, D.; Wallmersberger, T.; Faes, K.

2017-10-01

The paper shows experimental and numerical analyses of the clinching process of 6xxx series aluminum sheets in T6 condition and the self-pierce riveting process of an aluminum die casting. In the experimental investigations the damage behavior of the materials when using different tool parameters is analyzed. The focus of the numerical investigations is the damage prediction by a comparison of different damage criteria. Moreover, strength-and fatigue tests were carried out to investigate the influence of the joining process-induced damages on the strength properties of the joints.

An Efficient Processing of Join Queries for Sensor Networks Using Column-Oriented Databases

OpenAIRE

Kyung-Chang Kim

2013-01-01

Recently, the sensor network area is gaining attention both in the industry and academia. Many applications of sensor network such as vehicle tracking and environmental monitoring require joining sensor data scattered over the network. The main performance criterion for queries in a sensor network is to minimize the battery power consumption in each sensor node. Hence, reducing the communication cost of shipping data among sensor nodes is important since it is the main consumer of battery pow...

A review of joining techniques for SiCf/SiC composites for first wall applications

International Nuclear Information System (INIS)

Lewinsohn, C.A.; Jones, R.H.

1998-01-01

Many methods for joining monolithic and composite silicon carbide are available. Three techniques are candidates for use in fusion energy systems: in-situ displacement reactions, pre-ceramic polymer adhesives, and reaction bonding. None of the methods are currently developed enough to satisfy all of the criteria required, i.e., low temperature fabrication, high strength, and radiation stability. 58 refs

Gen Y Recruitment: Understanding Graduate Intentions to Join an Organisation Using the Theory of Planned Behaviour

Science.gov (United States)

Warmerdam, Amanda; Lewis, Ioni; Banks, Tamara

2015-01-01

Purpose: Using the Theory of Planned Behaviour (TPB) framework, the purpose of this paper is to explore whether the standard TPB constructs explained variance in Generation Y (Gen Y) individuals' intentions to join their ideal organisation. Design/methodology/approach: A mixed methods approach was used featuring qualitative and quantitative…

Joining of CBN abrasive grains to medium carbon steel with Ag-Cu/Ti powder mixture as active brazing alloy

International Nuclear Information System (INIS)

Ding, W.F.; Xu, J.H.; Shen, M.; Su, H.H.; Fu, Y.C.; Xiao, B.

2006-01-01

In order to develop new generation brazed CBN grinding wheels, the joining experiments of CBN abrasive grains and medium carbon steel using the powder mixture of Ag-Cu alloy and pure Ti as active brazing alloy are carried out at elevated temperature under high vacuum condition. The relevant characteristics of the special powder mixture, the microstructure of the interfacial region, which are both the key factors for determining the joining behavior among the CBN grains, the filler layer and the steel substrate, are investigated extensively by means of differential thermal analysis (DTA), scanning electron microscope (SEM) and energy dispersion spectrometer (EDS), as well X-ray diffraction (XRD) analysis. The results show that, similar to Ag-Cu-Ti filler alloy, Ag-Cu/Ti powder mixture exhibits good soakage capability to CBN grains during brazing. Moreover, Ti in the powder mixture concentrates preferentially on the surface of the grains to form a layer of needlelike Ti-N and Ti-B compounds by chemical metallurgic interaction between Ti, N and B at high temperature. Additionally, based on the experimental results, the brazing and joining mechanism is deeply discussed in a view of thermodynamic criterion and phase diagram of Ti-B-N ternary system

Initial Development in Joining of ODS Alloys Using Friction Stir Welding

Energy Technology Data Exchange (ETDEWEB)

Ren, Weiju [ORNL; Feng, Zhili [ORNL

2007-08-01

Solid-state welding of oxide-dispersion-strengthened (ODS) alloy MA956 sheets using friction stir welding (FSW) was investigated. Butt weld was successfully produced. The weld and base metals were characterized using optical microscopy, scanning electronic microscopy, transmission electronic microscopy, and energy dispersion x-ray spectrum. Microhardness mapping was also conducted over the weld region. Analyses indicate that the distribution of the strengthening oxides was preserved in the weld. Decrease in microhardness of the weld was observed but was insignificant. The preliminary results seem to confirm the envisioned feasibility of FSW application to ODS alloy joining. For application to Gen IV nuclear reactor heat exchanger, further investigation is suggested.

Convincing American Women to Join in the Efforts to Win World War I: A Lesson Plan.

Science.gov (United States)

Sunal, Cynthia S.; Haas, Mary E.

1994-01-01

Asserts that World War I, unlike previous wars, was not fought by small groups of professional soldiers, but with large groups of citizens, including women. Presents a lesson plan using poster and postcards that examines methods used by the U.S. government to rally women to join the war effort. (CFR)

Atom probe tomography of intermetallic phases and interfaces formed in dissimilar joining between Al alloys and steel

International Nuclear Information System (INIS)

Lemmens, B.; Springer, H.; Duarte, M.J.; De Graeve, I.; De Strycker, J.; Raabe, D.; Verbeken, K.

2016-01-01

While Si additions to Al are widely used to reduce the thickness of the brittle intermetallic seam formed at the interface during joining of Al alloys to steel, the underlying mechanisms are not clarified yet. The developed approach for the site specific atom probe tomography analysis revealed Si enrichments at grain and phase boundaries between the θ (Fe 4 Al 13 ) and η (Fe 2 Al 5 ) phase, up to about ten times that of the concentration in Al. The increase in Si concentration could play an important role for the growth kinetics of the intermetallic phases formed for example in hot-dip aluminizing of steel. - Highlights: •Si additions to Al reduce thickness of intermetallic seam in joining with steel. •Approach developed for the site specific APT analysis of the intermetallic seam •Si enrichment at grain and phase boundaries possibly affects growth of intermetallics.

Predictive modeling of reactive wetting and metal joining.

Energy Technology Data Exchange (ETDEWEB)

van Swol, Frank B.

2013-09-01

The performance, reproducibility and reliability of metal joints are complex functions of the detailed history of physical processes involved in their creation. Prediction and control of these processes constitutes an intrinsically challenging multi-physics problem involving heating and melting a metal alloy and reactive wetting. Understanding this process requires coupling strong molecularscale chemistry at the interface with microscopic (diffusion) and macroscopic mass transport (flow) inside the liquid followed by subsequent cooling and solidification of the new metal mixture. The final joint displays compositional heterogeneity and its resulting microstructure largely determines the success or failure of the entire component. At present there exists no computational tool at Sandia that can predict the formation and success of a braze joint, as current capabilities lack the ability to capture surface/interface reactions and their effect on interface properties. This situation precludes us from implementing a proactive strategy to deal with joining problems. Here, we describe what is needed to arrive at a predictive modeling and simulation capability for multicomponent metals with complicated phase diagrams for melting and solidification, incorporating dissolutive and composition-dependent wetting.

The Ku80 carboxy terminus stimulates joining and artemis-mediated processing of DNA ends

DEFF Research Database (Denmark)

Weterings, Eric; Verkaik, Nicole S; Keijzers, Guido

2008-01-01

Repair of DNA double-strand breaks (DSBs) is predominantly mediated by nonhomologous end joining (NHEJ) in mammalian cells. NHEJ requires binding of the Ku70-Ku80 heterodimer (Ku70/80) to the DNA ends and subsequent recruitment of the DNA-dependent protein kinase catalytic subunit (DNA-PK(CS)) an......Repair of DNA double-strand breaks (DSBs) is predominantly mediated by nonhomologous end joining (NHEJ) in mammalian cells. NHEJ requires binding of the Ku70-Ku80 heterodimer (Ku70/80) to the DNA ends and subsequent recruitment of the DNA-dependent protein kinase catalytic subunit (DNA......-PK(CS)) and the XRCC4/ligase IV complex. Activation of the DNA-PK(CS) serine/threonine kinase requires an interaction with Ku70/80 and is essential for NHEJ-mediated DSB repair. In contrast to previous models, we found that the carboxy terminus of Ku80 is not absolutely required for the recruitment and activation...... was phosphorylated to normal levels. This resulted in severely reduced levels of Artemis nuclease activity in vivo and in vitro. We therefore conclude that the Ku80 carboxy terminus is important to support DNA-PK(CS) autophosphorylation at specific sites, which facilitates DNA end processing by the Artemis...

Modeling Non-homologous End Joining

Science.gov (United States)

Li, Yongfeng

2013-01-01

Non-homologous end joining (NHEJ) is the dominant DNA double strand break (DSB) repair pathway and involves several NHEJ proteins such as Ku, DNA-PKcs, XRCC4, Ligase IV and so on. Once DSBs are generated, Ku is first recruited to the DNA end, followed by other NHEJ proteins for DNA end processing and ligation. Because of the direct ligation of break ends without the need for a homologous template, NHEJ turns out to be an error-prone but efficient repair pathway. Some mechanisms have been proposed of how the efficiency of NHEJ repair is affected. The type of DNA damage is an important factor of NHEJ repair. For instance, the length of DNA fragment may determine the recruitment efficiency of NHEJ protein such as Ku [1], or the complexity of the DNA breaks [2] is accounted for the choice of NHEJ proteins and subpathway of NHEJ repair. On the other hand, the chromatin structure also plays a role of the accessibility of NHEJ protein to the DNA damage site. In this talk, some mathematical models of NHEJ, that consist of series of biochemical reactions complying with the laws of chemical reaction (e.g. mass action, etc.), will be introduced. By mathematical and numerical analysis and parameter estimation, the models are able to capture the qualitative biological features and show good agreement with experimental data. As conclusions, from the viewpoint of modeling, how the NHEJ proteins are recruited will be first discussed for connection between the classical sequential model [4] and recently proposed two-phase model [5]. Then how the NHEJ repair pathway is affected, by the length of DNA fragment [6], the complexity of DNA damage [7] and the chromatin structure [8], will be addressed

Social Pharmacy and Clinical Pharmacy—Joining Forces

Directory of Open Access Journals (Sweden)

Anna Birna Almarsdottir

2015-12-01

Full Text Available This commentary seeks to define the areas of social pharmacy and clinical pharmacy to uncover what they have in common and what still sets them apart. Common threats and challenges of the two areas are reviewed in order to understand the forces in play. Forces that still keep clinical and social pharmacy apart are university structures, research traditions, and the management of pharmacy services. There are key (but shrinking differences between clinical and social pharmacy which entail the levels of study within pharmaceutical sciences, the location in which the research is carried out, the choice of research designs and methods, and the theoretical foundations. Common strengths and opportunities are important to know in order to join forces. Finding common ground can be developed in two areas: participating together in multi-disciplinary research, and uniting in a dialogue with internal and external key players in putting forth what is needed for the profession of pharmacy. At the end the question is posed, “What’s in a name?” and we argue that it is important to emphasize what unifies the families of clinical pharmacy and social pharmacy for the benefit of both fields, pharmacy in general, and society at large.

Friction riveting as an alternative mechanical fastening to join engineering plastics

Science.gov (United States)

Gagliardi, Francesco; Conte, Romina; Bentrovato, Renato; Simeoli, Giorgio; Russo, Pietro; Ambrogio, Giuseppina

2018-05-01

Friction Rivecting is a quite new joining process to connect multi-material structures. In brief, a metallic rivet is dipped rotating inside matrixes, usually made of plastics, increasing its original diameter. The use of high-performance plastics is more suitable being their higher mechanical and thermal properties important to avoid material degradation and to allow strong part connections. High-speed friction welding system has been usually used to perform the process. In the work here proposed, the joints have been achieved by means of a traditional milling machine and the attention has been focused on a widely used engineering plastic, i.e. polyamide 6 (PA6) with and without glass fiber reinforcement. A specific speed multiplier has been attached into the mandrel of the used machine to increase the reachable rotational speed. Moreover, rivets made of Titanium Grade 2 and of an Aluminum Alloy, the AA-6060, are utilized. The influence that the heating and the forging length can have on the quality of the obtained junctions, considering a fixed joining depth, has been tested and investigated. The performed connections have been judged by tensile tests, which were set to quantify the maximum strength of the joints for a transverse speed of 1,0 mm/min. Barreling effect can be observed close to the tip, which loses the initial shape of a cylinder characterized by straight vertical walls. Finally, the possible degradation of the polymer, due to temperature increment, has been also evaluated close to the working zone. According to that, it has to be highlighted that the process needs a heating balance, which is necessary to get sound joints. The compromise has, on one side, to allow the rivet penetration and deformation, and on the other side, to avoid the degradation of the polymer, which would affect its properties and a proper rivet deformation.