d'Errico, A; Mamo, C; Tomaino, A; Dalmasso, M; Demaria, M; Costa, G
Surveillance systems of occupational mortality are useful tools to identify cases of diseases suspected as occupational and to monitor their occurrence over time, in space and in population subgroups. Many surveillance systems make use of administrative data in which information about occupations and/or economic sectors of the subjects enrolled is reported, such as death certificates, hospital discharge data, census data, tax and pension records, and workers' compensation archives. In the present study we analyzed the mortality of a cohort of road construction and maintenance workers enrolled through the Italian national archive of work disability compensations, also in order to evaluate the possible use of this administrative source to monitor occupational mortality. 8,000 subjects (7,879 males) receiving a disability compensation while working in the "road construction and maintenance" sector were identified from INAIL (National Institute for Insurance of Accidents at Work) archives. Vital status of these subjects was ascertained using the information available in INAIL archives and in the national tax register. For those found to be deceased from INAIL or tax archives, or without any information on vital status, a mail follow-up was started. We considered as observation period the years from 1980 to 1993. A record linkage with the ISTAT (Italian Institute of Statistics) national mortality registry was performed and the cause of death was retrieved for 964 out of 1,259 subjects. The analysis was restricted to males, leaving altogether 863 observed deaths with ascertained cause (84.7% of 1,019 total male deaths). SMR for overall mortality and PMR for specific cause mortality were computed, using the general Italian male population as reference. Overall mortality was significantly reduced (SMR = 79.0; 95% CI = 74.2-84.0). Proportional mortality analysis revealed significant excess risks for all malignant tumours (332 deaths, PMR = 1.08) and for digestive diseases
Full Text Available Abstract Objective This research work is dedicated to occupational health problems caused by ergonomic risks. The research object was road building industry, where workers have to work very intensively, have long work hours, are working in forced/constrained work postures and overstrain during the work specific parts of their bodies. The aim of this study was to evaluate the work heaviness degree and to estimate the muscle fatigue of workers after one week work cycle. The study group consisted of 10 road construction and maintenance workers and 10 pavers aged between 20 and 60 years. Methods Physical load were analyzed by measuring heart rate (HR, work postures (OWAS and perceived exertion (RPE. Assessments of the muscles strain and functional state (tone were carried out using myotonometric (MYO measurements. The reliability of the statistical processing of heart rate monitoring and myotonometry data was determined using correlating analysis. Results This study showed that that road construction and repairing works should be considered as a hard work according to average metabolic energy consumption 8.1 ± 1.5 kcal/min; paving, in its turn, was a moderately hard work according to 7.2 ± 1.1 kcal/min. Several muscle tone levels were identified allowing subdivision of workers into three conditional categories basing on muscle tone and fatigue: I – absolute muscle relaxation and ability to relax; II – a state of equilibrium, when muscles are able to adapt to the work load and are partly able to relax; and III – muscle fatigue and increased tone. It was also found out that the increase of muscle tone and fatigue mainly depend on workers physical preparedness and length of service, and less – on their age. Conclusion We have concluded that a complex ergonomic analysis consisting of heart rate monitoring, assessment of compulsive working postures and myotonometry is appropriate to assess the work heaviness degree and can provide prognosis of
This draft manual describes an unsurfaced road maintenance management system for use on military installations. This system is available in either a manual or computerized mode (Micro PAVER). The maintenance standards prescribed should protect Govern...
Consider a vehicle moving on a road whose usage over time creates an uneven surface on the road. Road unevenness that we encounter on surface communications often arises as a consequence of dynamical effects of moving vehicles, of weather changes, and due to road construction works. This article concerns with mathematical modeling of the trajectory of a road vehicle moving on such a surface during the course of road maintenance.
This manual was developed with a major emphasis on the maintenance of gravel roads, including some basic design elements. The purpose of the manual is to provide clear and helpful information for doing a better job of maintaining gravel roads.
Logan, A.S.; Seedsman, R.W. [Coffey Partners International Pty. Ltd. (Australia)
Good roads are essential in moving men and materials to and from the underground workplace. An underground coal industry funded project was recently completed on underground mine road construction and maintenance. This paper discusses practical approaches to construction and maintenance of underground mine roads using transferable civil technologies and innovative techniques. Mine pavements are generally low-cost (relative to civil roads), constructed to varying standards using locally available materials to best meet the mobility needs of the mine. Performance of pavements is thus largely dependent on the environmental conditions, quality of the available road making materials, maintenance policies and available resources. This paper explains the causes of bad roads in various underground environments. It details available management strategies, construction and water control techniques, road maintenance and vehicle considerations. It concludes that the trend to larger rubber tires mining equipment needs to be matched with construction and maintenance of high quality road surfaces. For large operations, the total cost due to poor roads may equate to in excess of $A1 million per annum. The strategies outlined in this paper provide the basis for construction and maintenance of underground mine roads to help achieve desired production targets. (author). 2 tabs., 4 figs., 7 refs.
M Mostafa Hassan
Full Text Available In Africa, roads are the dominant mode of passenger and freight transport, for which the need is growing rapidly. It is noticeable that most of the African countries do not do enough to ensure the sustainability of road infrastructure as it has been widely reported that roads are affected, to varying degrees, by premature deterioration. Most of the African countries have adopted institutional reforms, notably entailing the creation of road funds and road agencies, and made significant progress on road maintenance. However, many challenges remain to be addressed in all of them to ensure appropriate maintenance. Although spending on road maintenance has increased over time in all African countries it remains insufficient to cover the needs. Poorly maintained roads constrain mobility, significantly raise vehicle operating costs, increase accident rates and their associated human and property costs, and aggravate isolation, poverty, poor health, and illiteracy in rural communities. This paper focuses, in particular, on road maintenance in some African countries considering types of road maintenance and the different approaches aiming at a comparison to reflect on similarities and differences.
M, Mostafa Hassan
In Africa, roads are the dominant mode of passenger and freight transport, for which the need is growing rapidly. It is noticeable that most of the African countries do not do enough to ensure the sustainability of road infrastructure as it has been widely reported that roads are affected, to varying degrees, by premature deterioration. Most of the African countries have adopted institutional reforms, notably entailing the creation of road funds and road agencies, and made significant progress on road maintenance. However, many challenges remain to be addressed in all of them to ensure appropriate maintenance. Although spending on road maintenance has increased over time in all African countries it remains insufficient to cover the needs. Poorly maintained roads constrain mobility, significantly raise vehicle operating costs, increase accident rates and their associated human and property costs, and aggravate isolation, poverty, poor health, and illiteracy in rural communities. This paper focuses, in particular, on road maintenance in some African countries considering types of road maintenance and the different approaches aiming at a comparison to reflect on similarities and differences.
This document provides an overview of the Federal Highway Administration's winter Maintenance Decision Support System (MDSS). The MDSS is a decision support tool that has the ability to provide weather predictions focused toward the road surface. The...
Ewadh Hussein Ali
Full Text Available Increased demand for efficient maintenance of the existing roadway system needs optimal usage of the allocated funds. The paper demonstrates optimized methods for prioritizing maintenance implementation projects. A selected zone of roadway system in Kerbala city represents the study area to demonstrate the application of the developed prioritization process. Paver system PAVER integrated with GIS is used to estimate and display the pavement condition index PCI, thereby to establish a priority of maintenance. In addition to simple ranking method by PCI produced by the output of PAVER, the paper introduces PCI measure for each section of roadway. The paper introduces ranking by multiple measures investigated through expert knowledge about measures that affect prioritization and their irrespective weights due to a predesigned questionnaire. The maintenance priority index (MPI is related to cost of suitable proposed maintenance, easiness of proposed maintenance, average daily traffic and functional classification of the roadway in addition to PCI. Further, incremental benefit-cost analysis ranking provide an optimized process due to benefit and cost of maintenance. The paper introduces efficient display of layout and ranking for the selected zone of roadway system based on MPI index and incremental BCR method. Although the two developed methods introduce different layout display for priority, statistical test shows that no significant difference between ranking of all methods of prioritization.
... 25 Indians 1 2010-04-01 2010-04-01 false How is road maintenance funded? 170.802 Section 170.802 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance § 170.802 How is road maintenance funded? (a) The U.S. Congress funds a BIA...
Full Text Available In countries with severe winters a major part of the annual budget for road maintenance is allocated on performance of winter road maintenance tasks. Finding appropriate remuneration forms to compensate entrepreneurs for performed road measures during winter is not an easy task in order to minimise or eliminate disputes and satisfy both client organisations and contractors. On the other hand improper reimbursement models lead either to the client’s annual budget imbalance due to unnecessary cost overruns or affect contractor’s cash-flow. Such cases in turn affect just-in-time winter road maintenance and then traffic safety. To solve such problems, a number of countries in cold regions like Sweden have developed different remuneration models based more on weather data called Weather Index. Therefore the objective of this paper is to investigate and evaluate the payment models applied in Sweden. The study uses a number of approaches namely; domestic questionnaire survey, analysis of a number of contract documents, a series of meetings with the project managers and an international benchmarking. The study recognised four remuneration models for winter maintenance service of which one based on weather data statistics. The study reveals the payment model based on weather data statistics is only applied for the roads with higher traffic flow and the model generates most uncertainty.
Setianingsih, A. I.; Sangaji, S.; Setyawan, A.
Road sector development policy in Bangka Belitung emphasis on equitable development, which is opening up new areas for industrial development zones of potential marine and coastal tourism, so that having an impact on the budget priority to build a new road. This led to a minimal budget provided for the maintenance of the existing road. This study aimed to evaluate the condition of the pavement both functionally and structurally, the growth of traffic density and the availability of existing road maintenance costs. Then, to analyze the influence of existing road conditions, traffic density and road maintenance costs to the type of road maintenance management. The results are compared with the results of the existing maintenance conducted by the Public Works Department of Bangka Belitung province. Evaluation of pavement conditions consists of visual assessment of pavement condition using IRI, pavement condition assessment functionally with deflection method using test data tool Benkelman Beam (BB) and the actual traffic load. IRI value, deflections and traffic growth gained from years 2011-2015 subsequently created regression models to obtain the relationship and the correlation coefficient. The analysis showed that using the same relative magnitude of the budget from 2011 to 2015, giving priority to the maintenance of the road with good conditions capable of providing the road with a steady state of 100%. Recommendations can be given that maintain the road with good conditions reflecting that preservation provide maximum results with the more efficient maintenance cost.
... 25 Indians 1 2010-04-01 2010-04-01 false What is the BIA Road Maintenance Program? 170.801 Section... ROADS PROGRAM BIA Road Maintenance § 170.801 What is the BIA Road Maintenance Program? The BIA Road... subpart contains a list of activities that are eligible for funding under the BIA road maintenance program. ...
Gultom, Tiopan Henry M.; Tamin, Ofyar Z.; Sjafruddin, Ade; Pradono
One of the solutions to get a sustainable road maintenance fund is to separate road sector revenue from other accounts, afterward, form a specific account for road maintenance. In 2001, Antameng and the Ministry of Public Works proposed a road fund model in Indonesia. Sources of the road funds proposal was a tariff formed on the nominal total tax. The policy of road funds was proposed to finance the road network maintenance of districts and provincials. This research aims to create a policy model of road maintenance funds in Indonesia using an earmarked tax mechanism. The research method is qualitative research, with data collection techniques are triangulation. Interview methods conducted were semi-structured. Strength, Weakness, Opportunities, and Threat from every part of the models were showen on the survey format. Respondents were representative of executives who involved directly against the financing of road maintenance. Validation model conducted by a discussion panel, it was called the Focus Group Discussion (FGD). The FGD involved all selected respondents. Road maintenance financing model that most appropriately applied in Indonesia was a model of revenue source use an earmarked PBBKB, PKB and PPnBM. Revenue collection mechanism was added tariff of registered vehicle tax (PKB), Vehicle Fuel Tax (PBBKB) and the luxury vehicle sales tax (PPnBM). The funds are managed at the provincial level by a public service agency.
van Harten, Aart; Worm, J.M.; Worm, J.M.
In this article we describe a Decision Support Model, based on Operational Research methods, for the multi-period planning of maintenance of bituminous pavements. This model is a tool for the road manager to assist in generating an optimal maintenance plan for a road. Optimal means: minimising the
... 25 Indians 1 2010-04-01 2010-04-01 false How is BIA's Road Maintenance Program related to the IRR... WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance § 170.804 How is BIA's Road Maintenance Program related to the IRR Program? The following chart illustrates how BIA's Road Maintenance Program is...
Lightweight, low-cost, color-coded job cards packed with technical reference information and geared to specific types of maintenance and troubleshooting efficiency in nuclear as well as other types of power plants. Developed in conjunction with EPRI's counterpart in Japan, job card sets have been pilot-tested at two operating U.S. nuclear plants and are also being evaluated by Japanese utilities. In addition to their potential for utility customization, job cards could become a new line of EPRI information product that is used directly by the people who inspect and repair equipment in utility power plants
... AND WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance § 170.803 What facilities are eligible under the BIA Road Maintenance Program? (a) The following public transportation facilities are eligible for maintenance under the BIA Road Maintenance Program: (1) BIA transportation facilities listed in...
Tanimoto, Keishi; Sugimoto, Yasuaki; Miyamoto, Shinya; Nada, Hideki; Hosoi, Yoshihiko
Recently, it is critical to manage deteriorating sewerage and road facilities efficiently and strategically. Since the sewerage pipes are mostly installed under road pavement, the works for the replacement of the sewerage pipes are partially common to the works for the road. This means that the replacement cost can be saved by coordinating the timing of the replacements by sewerage pipe and road pavement. The purpose of the study is to develop the model based on Markov decision process to derive the optimal group maintenance policy so as to minimize lifecycle cost. Then the model is applied to case study area and demonstrated to estimate the lifecycle cost using statistical data such as pipe replacement cost, road pavement rehabilitation cost, and state of deterioration of pipes and road pavement.
T. C. Mbara
Full Text Available The condition of Zimbabwe's roads has been declining due to insufficient maintenance and rehabilitation. Year on year, budget allocations have compared unfavourably with funding considered adequate to maintain highway networks and conduct modest construction work. Road infrastructure shortcomings have manifested themselves in the form of high vehicle operating costs and rampant potholes, leading to a decline in road safety and a deterioration of service levels for those who use roads to deliver goods or connect to international markets. In order to try and stop this vicious cycle of decline, the Government of Zimbabwe, on 8 August 2009, introduced a new policy of road-user charges, which involved the setting-up of 22 toll gates on the trunk road network. The overall objective was to raise revenue in order to close the funding gap, blamed for declining road quality. Although alternative methods of financing road maintenance have been debated for years, a generally accepted understanding is that road users should pay costs for road provisioning. This paper assesses the implementation of a road tolling system in Zimbabwe and describes matters relating to, inter alia, implementation strategy, initial performance outcomes and sustainability.
McMurdo Station. Part of this study in- cluded tracking the road maintenance and temperature and testing the road strength at predetermined mile...data provides insight as to the direct effects of various maintenance and environmental factors on the strength of the roads . Un- derstanding the...13 4.2 Maintenance vs. road strength
Jolita Petkuvienė; Dainius Paliulis
The purpose of research is to assess changes in the visual metal surface due to the exposure of road maintenance salts and molasses (‘Safecote’). Chlorides of deicing salts (NaCl, CaCl2) are the main agents affecting soil and water resources as well as causing the corrosion of roadside metallic elements. Molasses (‘Safecote’) is offered as an alternative to deice road pavement by minimizing the corrosion of metal elements near the road. A laboratory experiment was carried out to immerse and s...
Triyono, A. R. H.; Setyawan, A.; Sobriyah; Setiono, P.
Public expectations of Central Java, which is very high on demand fulfillment, especially road infrastructure as outlined in the number of complaints and community expectations tweeter, Short Mail Massage (SMS), e-mail and public reports from various media, Highways Department of Central Java province requires development model of environmental management in the implementation of a routine way by involving the community in order to fulfill the conditions of a representative, may serve road users safely and comfortably. This study used survey method with SEM analysis and SWOT with Latent Independent Variable (X), namely; Public Participation in the regulation, development, construction and supervision of road (PSM); Public behavior in the utilization of the road (PMJ) Provincial Road Service (PJP); Safety in the Provincial Road (KJP); Integrated Management System (SMT) and latent dependent variable (Y) routine maintenance of the provincial road that is integrated with the environmental management system and involve the participation of the community (MML). The result showed the implementation of routine maintenance of road conditions in Central Java province has yet to implement an environmental management by involving the community; Therefore developed environmental management model with the results of H1: Community Participation (PSM) has positive influence on the Model of Environmental Management (MML); H2: Behavior Society in Jalan Utilization (PMJ) positive effect on Model Environmental Management (MML); H3: Provincial Road Service (PJP) positive effect on Model Environmental Management (MML); H4: Safety in the Provincial Road (KJP) positive effect on Model Environmental Management (MML); H5: Integrated Management System (SMT) has positive influence on the Model of Environmental Management (MML). From the analysis obtained formulation model describing the relationship / influence of the independent variables PSM, PMJ, PJP, KJP, and SMT on the dependent variable
I. I. Leonovich
Full Text Available In order to ensure a rational usage of financial and material resources directed on winter automobile-road maintenance in theRepublicofBelarusan automatic control system of winter maintenance is under its development and introduction. The main purpose of the system is to obtain and use meteorological information on the state of a road network that allows to take necessary organizational and technological solutions ensuring safety and continuity of traffic during winter. This system also presupposes to ensure constant control over the state of roadway covering, expenditure of anti-glazed frost materials at all levels of management.The paper considers main aspects pertaining to introduction of the automatic control system of winter maintenance
Jokanović, Igor; Grujić, Bojana; Zeljić, Dragana; Grujić, Žarko; Svilar, Mila
The provision and maintenance of road infrastructure is a major global business, consequently it is essential that road maintenance services are provided in the most cost effective manner. Without regular maintenance, roads can rapidly fall into disrepair, preventing realization of the longer term impacts of road improvements on development, such as increased agricultural production and growth in school enrollment, which is of particular importance for a network of local (access) roads. Inadequate local roads maintenance in Albania is proposed to be solved by implementing performance based maintenance approach for which the costing exercise is presented within the paper.
Jokanović Igor; Grujić Bojana; Zeljić Dragana; Grujić Žarko; Svilar Mila
The provision and maintenance of road infrastructure is a major global business, consequently it is essential that road maintenance services are provided in the most cost effective manner. Without regular maintenance, roads can rapidly fall into disrepair, preventing realization of the longer term impacts of road improvements on development, such as increased agricultural production and growth in school enrollment, which is of particular importance for a network of local (access) roads. Inade...
... 25 Indians 1 2010-04-01 2010-04-01 false What is the IRR Program and BIA Road Maintenance Program... and BIA Road Maintenance Program policy? (a) It is the policy of the Secretary of the Interior and the... designed to enable Indian tribes to participate in all contractible IRR and BIA Road Maintenance programs...
D. K. Delaney; T. G. Grubb
The purpose of this pilot study was to record, characterize, and quantify road maintenance activity in Mexican spotted owl (Strix occidentalis lucida) habitat to gauge potential sound level exposure for owls during road maintenance activities. We measured sound levels from three different types of road maintenance equipment (rock crusherlloader,...
Hribernik, Boštjan; Potočnik, Igor
Forest roads are built for forest management purposes, to which planning of their use and maintenance is adapted. The increasing importance of non-forestry use of forest roads leads to higher maintenance standard, which by formed maintenance system causes permanent shortage of funds. Higher maintenance costs occur due to the past forest roads construction characteristics, which gave priority to quick opening of villages and farms, on the account of building quality. Other funds expenditure re...
... 25 Indians 1 2010-04-01 2010-04-01 false Can BIA Road Maintenance Program funds be used to improve... THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance § 170.808 Can BIA Road Maintenance Program funds be used to improve IRR transportation facilities? No. BIA Road...
Hamdi, Hadiwardoyo, Sigit P.; Correia, A. Gomes; Pereira, Paulo
A road network requires timely maintenance to keep the road surface in good condition onward better services to improve accessibility and mobility. Strategies and maintenance techniques must be chosen in order to maximize road service level through cost-effective interventions. This approach requires an updated database, which the road network in Indonesia is supported by a manual and visual survey, also using NAASRA profiler. Furthermore, in this paper, the deterministic model of deterioration was used. This optimization model uses life cycle cost analysis (LCCA), applied in an integrated manner, using IRI indicator, and allows determining the priority of treatment, type of treatment and its relation to the cost. The purpose of this paper was focussed on the aspects of road maintenance management, i.e., maintenance optimization models for different levels of traffic and various initial of road distress conditions on the national road network in Indonesia. The implementation of Integrated Road Management System (IRMS) can provide a solution to the problem of cost constraints in the maintenance of the national road network. The results from this study found that as the lowest as agency cost, it will affect the increasing of user cost. With the achievement of the target plan scenario Pl000 with initial value IRI 2, it was found that the routine management throughout the year and in early reconstruction and periodic maintenance with a 30 mm thick overlay, will simultaneously provide a higher net benefit value and has the lowest total cost of transportation.
Full Text Available The purpose of research is to assess changes in the visual metal surface due to the exposure of road maintenance salts and molasses (‘Safecote’. Chlorides of deicing salts (NaCl, CaCl2 are the main agents affecting soil and water resources as well as causing the corrosion of roadside metallic elements. Molasses (‘Safecote’ is offered as an alternative to deice road pavement by minimizing the corrosion of metal elements near the road. A laboratory experiment was carried out to immerse and spray metals with NaCl, CaCl2, NaCl:CaCl2 and NaCl:Safecote solutions. The obtained results showed that NaCl:Safecote solution had the lowest coating with corrosion products (the average 17±4 % of the surface. The solutions of NaCl, CaCl2 and NaCl:CaCl2 had the highest percentage rate of the corrosion product on the metal surface reaching an average of 33±5 %. Article in English
Montero, Kerry; Spencer, Graham; Ariens, Bernadette
This paper reports on a programme to improve road safety awareness in an industrial community in the vicinity of Jakarta, in Indonesia. Adapting the model of a successful community and school-based programme in Victoria, in Australia, and using a peer education approach, 16 employees of a major manufacturing company were trained to implement road safety education programmes amongst their peers. Specific target groups for the educators were colleagues, schools and the local community. Over 2 days the employees, from areas as diverse as production, public relations, personnel services, administration and management, learned about road safety facts, causes of traffic casualties, prevention approaches and peer education strategies. They explored and developed strategies to use with their respective target groups and practised health education skills. The newly trained workers received certificates to acknowledge them as 'SmartRoads Ambassadors' and, with follow-up support and development, became road safety educators with a commitment and responsibility to deliver education to their respective work and local communities. This paper argues that the model has potential to provide an effective and locally relevant response to road safety issues in similar communities.
... Site Development and Use § 211.78 Maintenance and conveyance of access roads. The Government will not... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Maintenance and conveyance of access roads. 211.78 Section 211.78 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE...
Asphalts are bitumens that consist of complex of hydrocarbon mixtures and it is used mainly in road construction and maintenance. This study was undertaken to evaluate the micronucleus (MN) assay of exfoliated buccal epithelial cells in road construction workers using liquid-based cytology (LBC) preparation. Three different stains (May-Grunwald Giemsa, hematoxylin and eosin, and Papanicolaou) were used to evaluate the frequency of MN in exfoliated buccal epithelial of 100 participants (fifty road construction workers and fifty administrative staff) using LBC preparation. Statistical analysis was performed with Student's t-test, and Proad construction exhibit a higher frequency of MN in exfoliated buccal epithelial cells and they are under the significant risk of cytogenetic damage. LBC preparation has potential application for the evaluation of frequency of MN. This technique may be advocated in those who are occupationally exposed to potentially carcinogenic agents in view of improvement in the smear quality and visualization of cell morphology.
Full Text Available The aim of the study is to develop Pavement Maintenance Management System (PMMS for four road sections of urban road network (Patiala, Punjab, India using Highway Development and Management (HDM-4 model. The HDM-4 provides a deterministic approach in data input and process data of existing road condition, traffic volume and pavement composition to predict road deterioration as per the urban road conditions in terms of International Roughness Index (IRI value. This study presents the use of HDM-4 model for the computation of optimum Maintenance and Rehabilitation (M&R strategy for each road section and comparative study of scheduled and condition responsive M&R strategies. The results of present study will be useful for gaining better support for decision-makers for adequate and timely fund allocations for preservation of the urban road network.
Since June 9, 1999 the Oregon Department of Transportation (ODOT) has implemented the Routine Road Maintenance: Water Quality and Habitat Guide Best Management Practices (the Guide), and is considered the cornerstone of the ODOT'd Office of Maintenan...
Morales, Francisco J.; Reyes, Antonio; Cáceres, Noelia; Romero, Luis M.; Benitez, Francisco G.; Morgado, Joao; Duarte, Emanuel; Martins, Teresa
A large percentage of transport infrastructures are composed of linear assets, such as roads and rail tracks. The large social and economic relevance of these constructions force the stakeholders to ensure a prolonged health/durability. Even though, inevitable malfunctioning, breaking down, and out-of-service periods arise randomly during the life cycle of the infrastructure. Predictive maintenance techniques tend to diminish the appearance of unpredicted failures and the execution of needed corrective interventions, envisaging the adequate interventions to be conducted before failures show up. This communication presents: i) A procedural approach, to be conducted, in order to collect the relevant information regarding the evolving state condition of the assets involved in all maintenance interventions; this reported and stored information constitutes a rich historical data base to train Machine Learning algorithms in order to generate reliable predictions of the interventions to be carried out in further time scenarios. ii) A schematic flow chart of the automatic learning procedure. iii) Self-learning rules from automatic learning from false positive/negatives. The description, testing, automatic learning approach and the outcomes of a pilot case are presented; finally some conclusions are outlined regarding the methodology proposed for improving the self-learning predictive capability.
Zhang Xueqing; Gao Hui
Optimization models are necessary for efficient and cost-effective maintenance of a road network. In this regard, road deterioration is commonly modeled as a discrete-time Markov process such that an optimal maintenance policy can be obtained based on the Markov decision process, or as a renewal process such that an optimal maintenance policy can be obtained based on the renewal theory. However, the discrete-time Markov process cannot capture the real time at which the state transits while the renewal process considers only one state and one maintenance action. In this paper, road deterioration is modeled as a semi-Markov process in which the state transition has the Markov property and the holding time in each state is assumed to follow a discrete Weibull distribution. Based on this semi-Markov process, linear programming models are formulated for both infinite and finite planning horizons in order to derive optimal maintenance policies to minimize the life-cycle cost of a road network. A hypothetical road network is used to illustrate the application of the proposed optimization models. The results indicate that these linear programming models are practical for the maintenance of a road network having a large number of road segments and that they are convenient to incorporate various constraints on the decision process, for example, performance requirements and available budgets. Although the optimal maintenance policies obtained for the road network are randomized stationary policies, the extent of this randomness in decision making is limited. The maintenance actions are deterministic for most states and the randomness in selecting actions occurs only for a few states.
Lloyd W. Swift
The Regional Guide for,the South (United States Department of Agriculture 1984b) recognizes that roads and skid trails are the major sources of sediment from forestry-related activities. The overall environmental impact statement for Region 8 (United States Department of Agriculture 1984a) estimates an existing national forest road network of 56,300 km (3 1,000 miles)...
Pretto, Ilaria; Malloci, Elisa; Tonidandel, Gabriele; Benedetti, Guido; Di Napoli, Claudia; Piazza, Andrea; Apolloni, Roberto; Cavaliere, Roberto
With this poster we present the environmental benefit on air quality derived by the application of the CLEAN-ROADS pilot project. The CLEAN-ROADS project addresses the problem of the environmental pollution caused by de-icing salts during winter road maintenance activities in the Province of Trento (Italy). A demonstrative Maintenance Decision Support System (MDSS) has been developed in order to improve the intervention procedures of the road management service. Specifically it aims to optimize the efficiency of how available resources (e.g., salt consumption) are currently used while guaranteeing the current level of road safety. The CLEAN-ROADS project has been tested and validated on a test area located in a valley bottom (Adige Valley), where the highest optimization margins are to be expected. The project supports current road maintenance practices, which has proved to be reliable and accurate, with a new scalable and energy-efficient road monitoring system. This system is based on a network of road weather stations (road weather information system, RWIS) installed on the test route. It is capable to collect real-time data about the road conditions and to perform short-term and now-cast road weather forecasts, which actively integrate weather data and bulletins covering the target area . This poster presents the results obtained from a three-year monitoring activity with the aim to (1) determine the impact of de-icing salts on air quality and (2) quantify the improvements obtained by the application of the CLEAN-ROADS project on air quality. The Ambient Air Quality and Cleaner Air for Europe Directive (2008/50/EC) states that contributions to exceedances of particulate matter PM10 limit values that are attributable to road winter salting may be subtracted when assessing compliance with air quality limit values, once provided that reasonable measures have been taken to lower concentrations . As the de-icing salts used in road maintenance are mainly based
Youssef Medhat Abdelrahman
Full Text Available In this research, the condition of a road pavement was investigated for the Aborshada Road in the Gharian region of Libya to determine the optimal maintenance works. Previously, a simple engineering judgment was the only procedure followed by the Gharian municipal engineers for evaluating pavements and prioritizing maintenance. The surface condition of the Aborshada Road pavement was investigated using “the Pavement Condition Index (PCI” visual technique. The pavement was inspected to survey the different distresses in each sample unit. Ninteen pavement distresses were classified according to the PCI standards (PCI for roads and parking lots became an ASTM standard in 2007 (D6433-07. It was necessary to know the most common distresses of the Aborshada Road to provide assistance for the decision maker in his evaluation of the pavement and the optimum repair method to be selected.
Hamsan, R.; Hafiz, H.; Azlan, A.; Keprawi, M. F.; Malik, A. K. A.; Adamuddin, A.; Abdullah, A. H.; Shafie, A. M.
This research allows local authorities to project road maintenance in term of activities and financial expenditure through pavement condition assessment and then Highway Development and Management (HDM-4) analysis. Current form of road maintenance carried out by local authority is on reactive manner where corrective actions were taken based on reports recorded. Some went unrecorded hence causing prolonged damages. This causes the local authority unable to project the required cost to maintain the roads. This affects the socio-economy of the surrounding routes. Hence, it is seen, as preventive maintenance of the roads will provide more feasible option in term of work force and finance to the local authority. To overcome this issue, a preventive model was introduced. This was done through pavement condition assessment (PCA) where analysis was done through HDM-4. Nondestructive test and destructive test were conducted in order to provide an indicator to the road's health. This were then analyzed in HDM-4 where the result was benchmarked with maintenance standard. The scope of this research is set to PCA where DT and NDT were performed on the routes of Petaling and the output is analyzed in HDM-4. The result of this research provides a 10 years forecast maintenance budget in maintaining the roads in Petaling. This allows the local authority to perform good practice in term of maintaining the roads while at the same time helps them in forecasting their budget for the upcoming years. This research will have a strong impact on the local socio-economy as well as local road user confidence towards the authority over good practices. This research can be further expanded to other type of roads as well as highway bridges.
Using observational data covering the whole Swedish national road network for the period 1998-2002, this paper estimates a set of maintenance and operation cost functions. It is found that costs for all operation and maintenance measures increase with traffic intensity, with two exceptions; total operation and winter operation measures are fixed cost activities. All other operation and maintenance measures have short run elasticities in the range 0.25-0.60. The impact of an additional vehicle...
Surbakti, M.; Doan, A.
The road pavement, constantly experiencing stress-strain due to traffic load through it, can cause damage to the pavement. Therefore, early detection and repair of the damage will be able to prevent more severe damage that can develop into pavement failure. A road condition survey is one of the earliest attempts to detect the initial damage of a pavement. In this case the driving comfort is the most important part for the driver in assessing road conditions that are affected by the level of road surface roughness. To determine the level of roughness of the road, one of the methods developed is the measurement using the NAASRA method. In this method the roughness of the road is an accumulation of the average unevenness of the road, with the general setting on halda of 100 m. However, with this 100-meter setting, in some places the final value of the roughness value is too large or too small so that it will result in the priority of the road maintenance. This is what underlies roughness research by comparing halda settings at 50 m and 200 m different from the general settings above.This study uses the International Roughness Index (IRI) method in determining the level of road stability concerning driving discomfort. IRI score obtained from direct survey in field by using Roughometer-NAASRA.The final result shows that there is a significant difference between the reading of halda which is set at 100 m reading with halda set with 50 and 200 meter readings. This may lead to differences in handling priorities, which may impact on the sustainability of road network maintenance management (Sustainaible Road Management)
Full Text Available This is a presentation delivered at the 27th SATC (Southern African Transport Conference) conference 2008, focusing on franchising principles and applying these principles to water services infrastructure, operation and maintenance...
... 25 Indians 1 2010-04-01 2010-04-01 false Can a tribe perform road maintenance under a self..., DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance § 170.809 Can a tribe perform road maintenance under a self-determination contract or self-governance agreement...
Dr Pardeep Kumar Gupta
Full Text Available ABSTRACT In India the road traffic volume has increased manifolds during the post-independence period. The traffic axle loading may also in many cases be much heavier than the specified limit. As a result of which the existing road network has been subjected to severe deterioration leading to premature failure of the pavements.In such a scenario development of the effective pavement management strategies would furnish useful information to ensure the compatible and cost- effective decisions so as to keep the existing road network intact. The pavement deterioration models can prove to be an effective tool which can assist highway agencies to forecast economic and technical outcome of possible investment decisions regarding maintenance management of pavements. The optimum maintenance and rehabilitation strategies developed in this study would be useful in planning pavement maintenance strategies in a scientific manner and ensuring rational utilization of limited maintenance funds. Once this strategy for urban road network is implemented and made operational this would serve as window to the other urban road network of different regions.
Karim Fareed M. A.
Full Text Available The pavement condition index (PCI is a simple, convenient and inexpensive way to monitor the condition of the surface of roads, identify maintenance and rehabilitation (M-and-R needs as well as ensure that road maintenance budgets are spent wisely. In this research, the pavement condition was evaluated in terms of the surface distresses existing at the time of the field evaluation. The PCI procedure was used in this research because it deals with the subject of pavement distress identification most comprehensively and is based on a sound statistical technique of pavement sampling.
Full Text Available An enterprise which is managed in a modern way should be based on the concept of knowledge management. It is particularly important in the case of processes related to facility maintenance, where the efficiency and effectiveness of work is directly connected with the employees’ knowledge. Improvement of processes involved in facility maintenance has a real influence on the productivity of a manufacturing enterprise. High accessibility of technical equipment and its correct functioning influence not only production efficiency but also the quality of products and the safety of operators. The article is a description of an attempt to implement one of quality engineering methods for improving the facility maintenance process. The author decided to use the 8D method to shorten the duration of downtimes caused by breakdowns. Owing to the conducted analysis and the implementation of the improvement and preventive actions, we were able to shorten the duration of a downtime of a machine having a crucial importance for the company. Investigations and implementation were conducted in one of Silesian production plants.
Current municipal perspectives regarding the oil and gas industry in Saskatchewan were described. Municipal jurisdiction and authority regarding road development and heavy haul road maintenance agreements were defined. Based on actual work experience, collaborative working relationships between the oil and gas industry and the municipal sector is well worth some industry time and effort since it will result in cost savings for the industry. In general, rural municipalities receive very limited tax benefits to recapture the costs of road reconstruction and maintenance caused by heavy industry traffic. Road servicing costs can be recaptured only if companies respect the weight limits, hauling regulations and road bans. On the whole, municipalities in Saskatchewan are favourably disposed towards the oil and gas industry, and have done well in the past to accommodate industry's needs. It is not unreasonable therefore to expect that industry show sensitivity to the impact of its activities on the local municipality, and does its level best to be on good terms with the municipalities through early two-way communication. Text of some relevant acts of the Legislature respecting the powers and authorities of rural municipalities are appended
Wittmann, Lutz; Zehnder, Daniel; Jenni, Oskar G; Landolt, Markus A
Sleep onset and maintenance problems are a frequent complaint after traumatic events in children. However, the association of traumatic experiences and disturbed sleep remains to be explained. To examine the incidence of sleep onset and maintenance problems in children after road traffic accidents and identify potential predictors of sleep onset and maintenance problems, including putative psychopathological mechanisms as well as stressors affecting the family system. In 33 children treated for injuries after road traffic accidents, sleep and measures of psychopathology were assessed 10 days, 2 months, and 6 months after hospital admission. The predictive value of four clusters of predictor variables for children's sleep onset and maintenance problems was prospectively tested by multiple regression analyses. These clusters included socio-demographic, injury- and accident-related, and psychopathological variable clusters as well as factors reflecting stressors concerning mothers and family. Children suffering from posttraumatic stress reported a prolonged subjective sleep latency. The severity of sleep onset and maintenance problems was predicted by female sex and the child's as well as mothers' posttraumatic stress disorder (PTSD) severity. Sleep onset and maintenance problems in children after trauma appear to result from a complex interaction of multiple factors. Our findings support the transactional model of sleep-wake regulation that bears implications for the development of adequate intervention strategies.
Brown, Anthony; Gibson, Richard; Tavener, Meredith; Guest, Maya; D'Este, Catherine; Byles, Julie; Attia, John; Horsley, Keith; Harrex, Warren; Ross, James
In Australia, four formal F-111 fuel tank deseal/reseal (DSRS) repair programs were implemented over more than two decades, each involving different processes and using a range of hazardous substances. However, health concerns were raised by a number of workers. The "Study of Health Outcomes in Aircraft Maintenance Personnel" was commissioned by the Australian Department of Defence to investigate potential adverse health outcomes as a result of being involved in the deseal/reseal processes. To compare measures of sexual function in F-111 aircraft fuel tank DSRS maintenance workers, against two appropriate comparison groups. Exposed and comparison participants completed a postal questionnaire which included general questions of health and health behavior, and two specific questions on sexual functioning. They also completed the International Index of Erectile Function (IIEF) questionnaire. Logistic regression was used to explore exposure status and outcome while adjusting for potential confounders. The three outcomes of interest for this study were the proportion of participants with erectile dysfunction (ED) according to the IIEF, the proportion with self-reported loss of interest in sex, and the proportion with self-reported problems with sexual functioning. Compared with each of the comparison groups, a larger proportion of the exposed group reported sexual problems and were classified as having ED according to the IIEF. In logistic regression, the odds of all three outcomes were higher for exposed participants relative to each comparison group and after adjustment for potentially confounding variables including anxiety and depression. There was a consistent problem with sexual functioning in the exposed group that is not explained by anxiety and depression, and it appears related to DSRS activities.
Ludmília de Souza Dias
Full Text Available ABSTRACTThis study presents a contribution to the modeling of a computer application employing a method of serviceability performance for unpaved roads, aiming the management of maintenance/restoration activities of the primary surface layer. The proposed methodology consisted of field inspections during dry (April to September and rainy (October to March periods, during which objective evaluations were performed to survey of defects and their densities and degrees of severity. To aid the functional classification of analyzed road sections and the determination of the defect with major influence on the serviceability of these roads, the method of serviceability performance proposed by Silva (2009was implemented in the Visual Basic for Applications (VBA language in Microsoft Excel software. With the use of the computer application proposed it was possible to identify among the defects analyzed in field, through the index of serviceability of the sampling unit per defect type (ISUdef, which one had the greatest influence on determining the relative serviceability index per road section (IST. The results allow us to conclude that the computer application Road achieved satisfactory results, since the objective evaluation criteria applied to road sections denotes consistency regarding their serviceability.
Full Text Available The road-maintenance strategies vary from one country to another, and even between the road management authorities within a one single country. It is not surprising, as there is not best maintenance method, nor a universal set of strategies that can be applied equally everywhere. Generally, there are strategies acceptable in certain conditions, but the factors influencing the selection process are diverse and very complex. This paper will present a review of the various measures that can be applied on the roads, which is certainly the basic condition of selection of an appropriate maintenance strategy.
Regan, Edward V.
The author presents a long-term public investment proposal to preserve and upgrade the nation's infrastructure system, offering a unique financing plan to eliminate much of the backlog of deferred maintenance that plagues America's roads and bridges. The plan would allow states and municipalities to get out from under this burden with a one-time upgrading program, and then attain a new capacity to maintain and improve their infrastructure networks. Regan concludes that the goal of long-term i...
In this study we assessed the mixed exposure of highway maintenance workers to airborne particles, noise and gaseous co-pollutants. The aims were to provide a better understanding of the workers exposure to facilitate the evaluation of short-term effects on cardiovascular health ...
Roadside infrastructure for safer European roads: D08 European best practice for roadside design: guidelines for maintenance and operations of roadside infrastructure. Project RISER, European Community
Andersson, J.; Lanner, G.; Wink, W.; Halleman, B.; Naing, C.L.; Thomson, R.; Fagerlind, H.; Dupre, G.; Bisson, O.; Carcia, J.M.; Lopez, F.; Papi, J.; Martinez, A.V.; Amengual, A.; Valtonen, J.; Kelkka, M.; Goose, U.; Klootwijk, C.W.; Hoogvelt, B.; Horst, A.R.A. van der; Ridder, S. de; Hoschopf, H.; Hill, J.
Maintenance and operations of road safety equipment and infrastructure ensure that all safety related elements of the road system are operating as they were designed, tested, and approved. Maintenance of road equipment should not only be considered as the repair of broken or damaged equipment, but
Lawrence, B.E.; van der Vooren, A.
Each year approximately 750,000 packages of radioactive materials are shipped throughout Canada. Regulatory controls on these shipments are designed to keep radiation doses received by transport workers well within acceptable limits. Since many of these workers are not monitored for radiation exposure, however, little factual information has been available in Canada to support theoretical estimates. A study to document actual radiation doses received by a select group of transport workers that is actively involved in the shipment of radioactive materials, was carried out in 1987 and 1988. This study involved the monitoring of 31 candidates from nine transport companies from across the country that handle medical isotopes, industrial isotopes, uranium fuel cycle materials and associated radioactive wastes. Each of the candidates (consisting of driver, dock workers, sorters, and supervisors) was issued personal thermoluminescent dosimeter (TLD) badges that were worn each day during the six month monitoring period. Some of the candidates were also issued cab or area dosimeters that were left in the cabs of the vehicles or in work areas so that the dose received in these areas could be differentiated from total personal exposure. During the monitoring program, the candidates filled out reporting sheets at the end of each working day to document information such as the quantity of materials handled, handling times and vehicle size. This information and the dosimetry data were used in the development of correlations between materials handled and doses reported so that doses for other handling similar materials could be estimated. Based on the results of the study, it was learned that while most of the transport workers receive doses that are at or near background levels, other (particularly those handling medical isotopes) are exposed to levels of radiation that may result in their receiving doses above the 5 mSv per annum limit set for members of the general public. On
Full Text Available The enhancement of connectivity between the main corridors of the economy in South Sumatera, as a purpose of the Strategic Plan of Directorate General Bina Marga and also an objective of MP3EI, Master Plan for Acceleration and expansion of Indonesia's Economic Development which is an ambitious plan by the Indonesian government to accelerate the realization of becoming a developed country would be able to achieve on the requirement of good condition on performance and pavement. In order to support the optimal condition of the road, the identification of road management was conducted to determine the necessity of road maintenance based on technical conditions and importance level of development of the road traversed. The management program proposed is expected to be used as a baseline in determining the maintenance of the road network in South Sumatera from 2015 until 2019. This research used Multi-criteria Analysis (MCA method, which consists of: (1 road network performance, covering width of roadways, traffic flow, V/C ratio, travel speed and travel time of the vehicle, and (2 pavement condition, with IRI, SDI, and the proportion of good pavement condition as a parameter. Multi-criteria analysis used combined road condition assessment score and importance level of development of the area traversed by. This analysis was conducted from 2015 until 2019. The research concluded that maintenance necessity in 2015 were dominated by routine maintenance (95.86% of the total length, then in 2016 until 2019 the needs were dominated by routine maintenance (near 100% of the total length. As the maintenance applied, a vast amount of total road length fulfilled as an achievement target. The results are follows: (a 100% with width of roadways ≥ 7 meter, (b 97.83% with V/C ratio 60km/hour, (d 17.32% with travel time (TT 95%, (f 90.37% with IRI < 4 m/Km, and (g 91.59 with SDI < 50. Yet with the achievement of 100% of total road length with a
Koh, Dong-Hee; Chung, Eun-Kyo; Jang, Jae-Kil; Lee, Hye-Eun; Ryu, Hyang-Woo; Yoo, Kye-Mook; Kim, Eun-A; Kim, Kyoo-Sang
Background: Petrochemical plant maintenance workers are exposed to various carcinogens such as benzene and metal fumes. In Korea, maintenance operations in petrochemical plants are typically performed by temporary employees hired as contract workers. Objectives: The purpose of this retrospective study was to evaluate cancer risk in temporary maintenance workers in a refinery/petrochemical complex in Korea. Methods: Subjects consisted of 14 698 male workers registered in a regional petrochemical plant maintenance workers union during 2002–2007. Cancer mortality and incidence were identified by linking with the nationwide death and cancer registries during 2002–2007 and 2002–2005, respectively. Standardized mortality ratios (SMRs) and standardized incidence ratios (SIRs) were calculated for each cancer. Results: Increased SMR 3.61 (six cases, 95% CI: 1.32–7.87) and SIR 3.18 (five cases, 95% CI: 1.03–7.42) were observed in oral and pharyngeal cancers. Conclusion: Our findings may suggest a potential association between oral and pharyngeal cancers and temporary maintenance jobs in the petrochemical industry. Future studies should include a longer follow-up period and a quantitative exposure assessment. PMID:24999849
Lie, Arve; Skogstad, Marit; Johnsen, Torstein Seip; Engdahl, Bo; Tambs, Kristian
Railway workers performing maintenance work of trains and tracks could be at risk of developing noise-induced hearing loss, since they are exposed to noise levels of 75-90 dB(A) with peak exposures of 130-140 dB(C). The objective was to make a risk assessment by comparing the hearing thresholds among train and track maintenance workers with a reference group not exposed to noise and reference values from the ISO 1999. Cross-sectional. A major Norwegian railway company. 1897 and 2730 male train and track maintenance workers, respectively, all exposed to noise, and 2872 male railway traffic controllers and office workers not exposed to noise. The primary outcome was the hearing threshold (pure tone audiometry, frequencies from 0.5 to 8 kHz), and the secondary outcome was the prevalence of audiometric notches (Coles notch) of the most recent audiogram. Train and track maintenance workers aged 45 years or older had a small mean hearing loss in the 3-6 kHz area of 3-5 dB. The hearing loss was less among workers younger than 45 years. Audiometric notches were slightly more prevalent among the noise exposed (59-64%) group compared with controls (49%) for all age groups. They may therefore be a sensitive measure in disclosing an early hearing loss at a group level. Train and track maintenance workers aged 45 years or older, on average, have a slightly greater hearing loss and more audiometric notches compared with reference groups not exposed to noise. Younger (<45 years) workers have hearing thresholds comparable to the controls. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Fakhar, A. M. M.; Asmaniza, A.
There are many types of ground rehabilation and improvement that can be consider and implement in engineering construction works for soil improvement in order to prevent road profile deformation in later stage. However, when comes to road maintenance especially on operated expressways, not all method can be apply directly as it must comply to opreation's working window and lane closure basis. Key factors that considering ideal proposal for ground rehabilitation are time, cost, quality and most importantly practicality. It should provide long lifespan structure in order to reduce continuous cycle of maintenance. Thus, this paper will present two approaches for ground rehabilitation, namely Polyurethane (PU) Foam Injection System and Geocrete Soil Stabilization. The first approach is an injection system which consists two-parts chemical grout of Isocynate and Polyol when mixed together within soil structure through injection will polymerized with volume expansion. The strong expansion of grouting causes significant compression and compacting of the surrounding soil and subsequently improve ground properties and uplift sunken structure. The later is a cold in-place recyclying whereby mixture process that combines in-situ soil materials, cement, white powder (alkaline) additive and water to produce hard yet flexible and durable ground layer that act as solid foundation with improved bearing capacity. The improvement of the mechanical behaviour of soil through these two systems is investigated by an extensive testing programme which includes in-situ and laboratory test in determining properties such as strength, stiffness, compressibility, bearing capacity, differential settlement and etc.
Hendhratmoyo, Andri; Syafi'i; Pungky Pramesti, Florentina
Due to the limited budget of urban roads maintenance and rehabilitation, its prioritizationis inevitable. Many models have been developed to solve these problems. That is the reason why the purpose of this study was to evaluate the screening process in the decision making of the urban roads maintenance and rehabilitation priority. The prioritization that have to be taken into account on the effect of important criteria are road condition, traffic volume, budget processing and land use. 30 stakeholders were asked to fill in the questionnaires. The object of this case study are 188 urban roads sections at Ponorogo in order to examine the priorities. The researchers collected the data from Surface Distress Index (SDI), traffic volume, budget processing and land use of these road sections. Based on analysis, the weights of the criteria were: road condition (W1) = 0,411; traffic volume (W2) = 0,122; budget processing (W3) = 0,363 and land use (W4) = 0,105. The result of this study by the comparison of the index values of the alternatives priorities, Nyi Ageng Serang Street, was revealed to have the highest priority over the other streets regarding of maintenance and rehabilitation activities.
Yashon O. Ouma
Full Text Available For road pavement maintenance and repairs prioritization, a multiattribute approach that compares fuzzy Analytical Hierarchy Process (AHP and fuzzy Technique for Order Preference by Ideal Situation (TOPSIS is evaluated. The pavement distress data was collected through empirical condition surveys and rating by pavement experts. In comparison to the crisp AHP, the fuzzy AHP and fuzzy TOPSIS pairwise comparison techniques are considered to be more suitable for the subjective analysis of the pavement conditions for automated maintenance prioritization. From the case study results, four pavement maintenance objectives were determined as road safety, pavement surface preservation, road operational status and standards, and road aesthetics, with corresponding depreciating significance weights of W=0.37,0.31,0.22,0.10T. The top three maintenance functions were identified as Thin Hot Mix Asphalt (HMA overlays, resurfacing and slurry seals, which were a result of pavement cracking, potholes, raveling, and patching, while the bottom three were cape seal, micro surfacing, and fog seal. The two methods gave nearly the same prioritization ranking. In general, the fuzzy AHP approach tended to overestimate the maintenance prioritization ranking as compared to the fuzzy TOPSIS.
Burdorf, A.; Windhorst, J.; Beek, A.J. van der; Molen, H. van der; Swuste, P.H.J.J.
This study describes the impact of the use of mechanised equipment on physical load and workers' health among road workers and floor layers by comparing the traditional manual work method with frequently occurring scenarios of use of this new equipment. Continuous direct measurements of postures
Raid R.A. Almuhanna
Full Text Available Pavement Maintenance Management System (PMMS includes systematic actions to get effective management and economic maintenance cost, depending on pavement condition index (PCI. PAVER 6.5.7 software are used to compute PCI values for a selected zone of road network in Kerbala City Center (KCC. Visual inspection survey is conducted to investigate the type, severity level, and extent of failure at sections and sample unites of selected roads. The area under study had 56.8 km length and contain functionally all types of urban roads. The data collection is achieved for a total of 109 road sections in; 20 Major arterials, 28 Minor arterials, 14 Collectors, and 47 Local sections. Further, the collected data for each section are inventoried and evaluated using PAVER 6.5.7. Also, analysis and prediction of the PCI curve for different sections are determined for different design lives. PAVER 6.5.7 is linked with GIS to layout the results and show the priority for maintenance and rehabilitation for the whole network are established using the critical PCI value.The resulted PCI indicated that 63% of the network sections of the study area have good condition, 12% have fair condition and 25% have poor condition. Keywords: Pavement maintenance management system, Pavement condition index (PCI, PAVER 6.5.7 system, GIS, Distress type
Oburger, Eva; Jäger, Anna; Pasch, Alexander; Dellantonio, Alex; Stampfer, Karl; Wenzel, Walter W
The ever increasing use of wood material as fuel for green energy production requires innovative, environmentally safe strategies for recycling of the remaining wood ash. Utilizing wood ash in forest road construction and maintenance to improve mechanical stability has been suggested as a feasible recycling option. To investigate the environmental impact of wood ash application in forest road maintenance, a two-year field experiment was conducted at two Austrian forest sites (Kobernausserwald (KO) (soil pH 5.5) and Weyregg (WE) (pH 7.7)) differing in their soil chemical properties. Two different ashes, one produced by grate incineration (GA) and the other by fluidized bed incineration in a mixture with 15 vol% burnt lime (FBA), were incorporated in repeated road sections at a 15:85% (V/V) ash-to-soil rate. Leaching waters from the road body were collected and analyzed for 32 environmentally relevant parameters over two years. Upon termination of the experiment, sub-road soil samples were collected and analyzed for ash-related changes in soil chemistry. Even though a larger number of parameters was affected by the ash application at the alkaline site (WE), we observed the most pronounced initial increases of pH as well as Al, As, Fe, Mn, Ni, Co, Cu, Mo, and NO2(−) concentrations in leachates beneath GA-treated road bodies at Kobernausserwald due to the lower soil buffer capacity at this site. Despite the observed effects our results indicate that, when specific requirements are met (i.e. appropriate ash quality, sufficient soil buffer capacity below the road body, and single time-point ash incorporation within several decades), wood ash application in forest road construction is generally environmentally acceptable.
Nogueira, Helen Cristina; Diniz, Ana Carolina Parise; Barbieri, Dechristian França; Padula, Rosimeire Simprini; Carregaro, Rodrigo Luiz; de Oliveira, Ana Beatriz
During the recent decades Brazil has experienced an exponential growth in the aviation sector resulting in an increasing workforce. The aircraft maintenance industry stands out, where the workers have to handle different kind of objects. The aim of this study was to evaluate psychosocial indicators as well as musculoskeletal symptoms and disorders among aircraft maintenance workers. One hundred and one employees were evaluated (32.69 ± 8.25 yr, 79.8 ± 13.4 kg, and 1.75 ± 0.07 m). Musculoskeletal symptoms and disorders were assessed through the Nordic Musculoskeletal Questionnaire (NMQ) and a standardized physical examination. The Job Content Questionnaire (JCQ) and the Utrecht Work Engagement Scale (UWES) were applied to evaluate psychosocial indicators. Results of the NMQ indicate the lower back as the most affected body region. On the other hand, the physical examination has shown clinical diagnosis of shoulder disorders. Neck, upper back and ankle/foot were also reported as painful sites. Most of workers have active work-demand profile and high work engagement levels. We suggest that musculoskeletal symptoms may be related to high biomechanical demand of the tasks performed by workers, what must be further investigated.
Charles H. Luce; Thomas A. Black
Observations of sediment yield from road segments in the Oregon Coast Range show that either heavy traffic during rainfall or blading the road ditch will increase erosion from forest roads. For the fine soils and high quality aggregate surfacing on the study plots, ditch blading increased sediment yield more than traffic equivalent to 12 log trucks per day. The...
Mannocci, Alice; Gabrijelcic, Simona; Di Thiene, Domitilla; Saulle, Rosella; Boccia, A; La Torre, G
The road freight and passenger transport sector exposes the workers of this sector to a considerable health risk. Application of the relative legislation to safeguard worker's safety is an obligation for the employer. The aim of the study was to assess the application of current legislation in the trucking sector and ascertain whether there are differences between large and small enterprises. The study was conducted through direct interview with managers of road freight and passenger transport companies in the Lazio Region in 2009. Information was collected using a questionnaire composed of 77 items concerning risk assessment and organization aspects in the enterprises. The enterprisers were stratified by number of workers and drivers. To detect possible associations the Chi-squared and Fisher's Exact tests were used. A total of 42 enterprisers participated in the study. Significant differences were found between larger enterprisers (10 workers) and smaller enterprises (management aspects, the enterprisers with a higher number of workers were more likely to have a workers' representative for safety compared to the smaller enterprises (respectively 88.9% versus 50.0%) and a road accidents Register (77.8% versus 16.7%), with p < 0.001 significance levels. The risks most frequently assessed, in decreasing order, were: vibrations, manual handling of loads, stress, noise, awkward postures, night work, alcohol consumption, drug addiction and microclimatic conditions. Vibrations, night work and microclimatic conditions risks were assessed to a lower degree in the smaller enterprisers compared to the larger enterprises.
Yashon O. Ouma; J. Opudo; S. Nyambenya
For road pavement maintenance and repairs prioritization, a multiattribute approach that compares fuzzy Analytical Hierarchy Process (AHP) and fuzzy Technique for Order Preference by Ideal Situation (TOPSIS) is evaluated. The pavement distress data was collected through empirical condition surveys and rating by pavement experts. In comparison to the crisp AHP, the fuzzy AHP and fuzzy TOPSIS pairwise comparison techniques are considered to be more suitable for the subjective analysis of the pa...
This document concerns the award of two contracts for the maintenance of green areas and roads, i) on the CERN site of Meyrin, LHC Point 1 and SPS Points BA5 and BA6 and ii) on the CERN site of Prévessin, all the LHC Points except Point 1 and all the SPS Points except Points BA5 and BA6. The Finance Committee is invited to agree to the negotiation of contracts with: - PAYSAGE CONCEPT (FR), the lowest bidder, for the maintenance of green areas and roads on the CERN's Meyrin site, LHC Point 1 and SPS Points BA5 and BA6 for two years for a total amount of 903 532 Swiss francs, not subject to revision until 30 June 2008. - WIESMANN (FR), the lowest bidder, for the maintenance of green areas and roads on the CERN's Prévessin site, all the LHC Points except Point 1 and all the SPS Points except Points BA5 and BA6 for two years for a total amount of 671 529 Swiss francs, not subject to revision until 30 June 2008. Both contracts will include options for three one-year extensions beyond the initial two-year period....
Çelik, Ayla; Yildirim, Seda; Ekinci, Seda Yaprak; Taşdelen, Bahar
Buccal micronucleus cytome (BMCyt) assay monitors genetic damage, cell proliferation and cell death in humans exposed to occupational and environmental agents. BMCyt is used as an indicator of genotoxic exposure, since it is associated with chromosomal instability. There is little research on the occupational exposure among road construction workers for genotoxicity testing. In the present study, we evaluated MN frequencies and other nuclear changes, karyorrhexis (KR), karyolysis (KL), broken egg (BE), binucleate (BN), condensed chromatin cell (CCC), and picnotic cell (PC) in buccal mucosa cells of 40 road construction workers (twenty smokers and twenty non-smokers) and 40 control groups consisting of healthy persons (twenty smokers and twenty non-smokers). Microscopic observation was performed of 2000 cells per individual in both road construction workers and control group. In control and worker groups, for each person repair index (RI) was calculated via formula KR+L/BE+MN. The results showed a statistically significant increase in the frequency of MN in buccal epithelial cells of exposed group compared with control group (proad construction workers, RI is lower than the control group. There is a significant difference between workers and control group (proad paving operations are absorbed by workers and that asphalt fume exposure is able to significantly induce cytogenetic damage in buccal mucosa cells of workers after controlling some possible confounding factors, such as age, sex and smoking habits. In addition to determination of nuclear changes and the micronucleus, the determination of RI value presents a new approach to genotoxic bio-monitoring assessment studies of occupationally exposed population. Copyright © 2013 Elsevier Inc. All rights reserved.
Full Text Available The article gives an overview of Polish and international formal and legal requirements for roadside advertising and the relevant road safety impacts. The analysis focussed on outdoor advertising life cycle consisting of three stages: location, operation and removal of advertising. Experience of road authorities from Australia (Queensland, Republic of South Africa and the United Kingdom was collected. The article is part of a joint project “Development of Road Innovations” funded by the National Centre for Development and Innovation and the General Directorate For National Roads and Motorways.
The first part of this project conducted a detailed evaluation of the ability of a new friction measurement system to : provide an accurate measure of road conditions. A system that records friction coefficient as a function of road : location was de...
Liu, Dan; Dong, Si-Ping; Gao, Guang-Ming; Fan, Ming-Yu; Zhang, Zong-Jiu; Fang, Peng-Qian
To get scientific basis for further health education through the research of the road construction workers' KBP before and after the interventions of highway AIDS prevention project. Multi-stage random sampling method was employeed to select workers of 8 sites from 14 sites along highway to investigate their AIDS knowledge, belief and performance (KBP) before and after highway AIDS prevention project. Over 90% of the investigated workers had ever heard about AIDS, and the non-skilled workers of lower educational level improved more after intervention. The correct answer rate of the three transmitting ways of AIDS of drivers which is the focused group of highway before and after intervention had the obvious statistical significance (Proad construction workers is effective and further health education of HIV prevention should be carried out among the road construction workers to improve their knowledge and awareness of avoiding the high-risk behaviors. Copyright © 2013 Hainan Medical College. Published by Elsevier B.V. All rights reserved.
A total of 1,142 grounds maintenance workers (GMWs) were fatally injured at work during 2003--2008, an average of 190 each year. GMWs accounted for 3.4% of all occupational fatalities, and 31% of those GMWs were Hispanic or Latino. Approximately 83% of the Hispanic or Latino GMWs who died were born outside the United States. In 2008, approximately 1.52 million persons were employed as GMWs, constituting 1.0% of the U.S. workforce. During 2003--2007, an average of 13.3 per 100,000 employed GMWs died each year, compared with an overall rate of 4.0 fatalities per 100,000 U.S. workers. The rate of on-the-job fatal injuries among GMWs has remained elevated relative to other workers for >20 years. This report characterizes events leading to GMW fatalities and differences in fatality characteristics across demographic groups among GMWs, based on an evaluation of 2003--2008 data from the U.S. Department of Labor's Bureau of Labor Statistics (BLS) Census of Fatal Occupational Injuries (CFOI) program. The report also identifies workplace interventions that might reduce the incidence of fatal injuries. Major events leading to GMW occupational fatalities included transportation incidents (31%), contact with objects and equipment (25%), falls (23%), and traumatic acute exposures to harmful substances or environments (e.g., electrocution and drowning) (16%). To reduce the incidence of such fatalities, employers, trade and worker associations, and policy makers should focus on effective, targeted workplace safety interventions such as frequent hazard identification and training for specific hazards. Diversity among the populations of workers requires use of culture- and language-appropriate training techniques as part of comprehensive injury and illness prevention programs.
Bradley, Paul M.; Chapelle, Frances H.
A series of 14C-radiotracer-based microcosm experiments were conducted to assess: 1) the extent, rate and products of microbial dechlorination of trichloroethene (TCE), cis-dichloroethene (cis-DCE) and vinyl chloride (VC) in sediments at the Peger Road site; 2) the effect of three electron donor amendments (molasses, shrimp and crab chitin, and 'Hydrogen Release Compound' (HRC)) on microbial degradation of TCE in three Peger Road sediments; and 3) the potential significance at the site of chloroethene biodegradation processes other than reductive dechlorination. In these experiments, TCE biodegradation yielded the reduced products, DCE and VC, and the oxidation product CO 2. Biodegradation of DCE and VC involved stoichiometric oxidation to CO 2. Both laboratory microcosm study and field redox assessment results indicated that the predominant terminal electron accepting process in Peger Road plume sediments under anoxic conditions was Mn/Fe-reduction. The rates of chloroethene biodegradation observed in Peger Road sediment microcosms under low temperature conditions (4?C) were within the range of those observed in sediments from temperate (20?C) aquifer systems. This result confirmed that biodegradation can be a significant mechanism for in situ contaminant remediation even in cold temperature aquifers. The fact that CO2 was the sole product of cis-DCE and VC biodegradation detected in Peger Road sediments indicated that a natural attenuation assessment based on reduced daughter product accumulation may significantly underestimate the potential for DCE and VC biodegradation at the Peger Road. Neither HRC nor molasses addition stimulated TCE reductive dechlorination. The fact that molasses and HRC amendment did stimulate Mn/Fe-reduction suggests that addition of these electron donors favored microbial Mn/Fe-reduction to the detriment of microbial TCE dechlorinating activity. In contrast, amendment of sediment microcosms with shrimp and crab chitin resulted in the
Ali Gerami Matin
Full Text Available Optimized road maintenance planning seeks for solutions that can minimize the life-cycle cost of a road network and concurrently maximize pavement condition. Aiming at proposing an optimal set of road maintenance solutions, robust meta-heuristic algorithms are used in research. Two main optimization techniques are applied including single-objective and multi-objective optimization. Genetic algorithms (GA, particle swarm optimization (PSO, and combination of genetic algorithm and particle swarm optimization (GAPSO as single-objective techniques are used, while the non-domination sorting genetic algorithm II (NSGAII and multi-objective particle swarm optimization (MOPSO which are sufficient for solving computationally complex large-size optimization problems as multi-objective techniques are applied and compared. A real case study from the rural transportation network of Iran is employed to illustrate the sufficiency of the optimum algorithm. The formulation of the optimization model is carried out in such a way that a cost-effective maintenance strategy is reached by preserving the performance level of the road network at a desirable level. So, the objective functions are pavement performance maximization and maintenance cost minimization. It is concluded that multi-objective algorithms including non-domination sorting genetic algorithm II (NSGAII and multi-objective particle swarm optimization performed better than the single objective algorithms due to the capability to balance between both objectives. And between multi-objective algorithms the NSGAII provides the optimum solution for the road maintenance planning.
Arcury-Quandt, Alice E.; Gentry, Amanda L.; Marín, Antonio J.
Background The golf course industry has a growing Latino work force. Little occupational health research has addressed this work force. This paper examines golf course superintendents’ and Latino grounds maintenance workers’ pesticide knowledge, beliefs, and safety training. In particular, it focuses on knowledge of and adherence to OSHA Right-to-Know regulations. Methods In person, in-depth interviews were conducted with ten golf course superintendents in five states and with sixteen Latino grounds maintenance workers in four states. Results Few superintendents were in compliance with Right-to-Know regulations or did pesticide safety training with all of their workers. Few workers had any pesticide safety knowledge. Most safety training on golf courses was rudimentary and focused on machine safety, and was usually conducted in the off-season or on rainy days, not before workers were assigned tasks. Conclusions More Right-to-Know training is necessary for superintendents and grounds maintenance workers. Culturally and linguistically appropriate Spanish language materials need to be developed or made more widely available to train workers. Better enforcement of safety and training regulations is necessary. PMID:21360723
Perkins, Robert A; Hargesheimer, John; Vaara, Leah
During a repair and reconstruction project of an unpaved highway in a remote region of Alaska, workers discovered, after construction had commenced, that the materials used from a local material site contained asbestos (variously described as tremolite or actinolite). The regional geology indicated the presence of ultramafic rock, which often contains asbestos. Evaluation of asbestos exposure to workers, their equipment, and living quarters was required, as was the possible future exposure of workers and the general public to asbestos already used in the roadway construction. In addition, a decision was needed on whether to use materials from the contaminated site in the future. Of the almost 700 breathing zone air monitoring samples taken of the workers, 3% of the samples indicated exposures at or near 0.1 f/cc by the National Institute for Occupational Safety and Health (NIOSH) 7400 phase contrast microscopy (PCM) procedure. Thirty-six of the PCM samples underwent transmission electron microscopy (TEM) analysis by the NIOSH 7402 procedure, which indicated that about 40% of the fibers were asbestos. After classifying samples by tasks performed by workers, analysis indicated that workers, such as road grader operators who ground or spread materials, had the highest exposures. Also, monitoring results indicated motorist exposure to be much less than 0.1 f/cc. The design phase of any proposed construction project in regions that contain ultramafic rock must consider the possibility of amphibole contamination of roadway materials, and budget for exploration and asbestos analysis of likely materials sites.
Hildebrandt, V.H.; Bongers, P.M.; Dul, J.; Dijk, F.J.H. van; Kemper, H.C.G.
To determine priorities for ergonomic improvements in five maintenance departments of a steel company, a study was carried out to identify groups with a high prevalence of musculoskeletal problems or a high exposure to unfavourable musculoskeletal workload. All workers were asked to complete a
Nordengen, Paul A
Full Text Available with inadequate vehicle maintenance, driver fatigue and poor driver health, contributes significantly to South Africa’s poor road safety record. This paper describes the most recent developments of an initiative to introduce meaningful self-regulation in the heavy...
Yoshino, K; Ishii, K; Nakasa, H [Central Research Inst. of Electric Power Industry, Tokyo (Japan); Shigeta, S
To ensure the safety of reactor maintenance workers and to reduce the radiation exposure through the enhancement of labor efficiency, it is needed to evaluate quantitatively work-stress levels of workers with radiation-protection suits. This paper presents the results of reactor-maintenance simulation tests in which the relationship between the work stress and biological characteristics is investigated for 5 pinds of model works done by testees without protection suits in an artificial climate chamber. Major results obtained are: (1) the selected model works are mostly evaluated to be relatively heavy through the measurement of RMR (Relative Metabolic Rate). (2) biological characteristics such as heart rate and respiratory volume under the model works have close relationship to RMR which is the cumulative quantity in relatively long time, and then they may become the real-time indicator for the work stress level. (3) such biological characteristics are greatly affected by the high-temperature work-environment which is often seen in workers with protection suits.
Omar, Mohamed Shamun; Quinn, Margaret M; Buchholz, Bryan; Geiser, Ken
Many newly constructed green buildings (GB) are certified using the United States Green Building Council (USGBC) Leadership in Energy and Environmental Design (LEED) rating system for new construction and major renovation which focuses on architectural and mechanical design to conserve energy, reduce environmental harm, and enhance indoor quality for occupants. This study evaluated the preventive maintenance (PM) worker occupational safety and health (OSH) risks related to the design of GB. PM job hazard analyses (JHA) were performed on the tasks required to operate and maintain five GB features selected from 13 LEED certified GB. A 22-item JHA and OSH risk scoring system were developed. Potentially serious OSH hazards included: green roofs made of slippery material without fall protection; energy recovery wheels and storm water harvesting systems in confined spaces; skylights without guard rails; and tight geothermal well mechanical rooms constraining safe preventive practices. GB can present PM OSH risks and these should be eliminated in the building design phase. Copyright © 2013 Wiley Periodicals, Inc.
Guo, Zheng; Lucchetta, Elena; Rafel, Neus; Ohlstein, Benjamin
Maintenance of tissue homeostasis is critical in tissues with high turnover such as the intestinal epithelium. The intestinal epithelium is under constant cellular assault due to its digestive functions and its function as a barrier to chemical and bacterial insults. The resulting high rate of cellular turnover necessitates highly controlled mechanisms of regeneration to maintain the integrity of the tissue over the lifetime of the organism. Transient increase in stem cell proliferation is a commonly used and elaborate mechanism to ensure fast and efficient repair of the gut. However, tissue repair is not limited to regulating ISC proliferation, as emerging evidence demonstrates that the Drosophila intestine uses multiple strategies to ensure proper tissue homeostasis that may also extend to other tissues. Copyright Â© 2016 Elsevier Ltd. All rights reserved.
Keijzer, E.E.; Leegwater, G.A.; Vos-Effting, S.E. de; Wit, M.S. de
The ambition of European countries to reduce their national greenhouse gas emissions, has been translated in the Netherlands in green procurement policy of the national road administration. An increasing amount of innovative techniques and approaches in road infrastructure construction and
Spirtas, R; Stewart, P A; Lee, J S; Marano, D E; Forbes, C D; Grauman, D J; Pettigrew, H M; Blair, A; Hoover, R N; Cohen, J L
A retrospective cohort study of 14,457 workers at an aircraft maintenance facility was undertaken to evaluate mortality associated with exposures in their workplace. The purpose was to determine whether working with solvents, particularly trichloroethylene, posed any excess risk of mortality. The study group consisted of all civilian employees who worked for at least one year at Hill Air Force Base, Utah, between 1 January 1952 and 31 December 1956. Work histories were obtained from records at the National Personnel Records Centre, St. Louis, Missouri, and the cohort was followed up for ascertainment of vital state until 31 December 1982. Observed deaths among white people were compared with the expected number of deaths, based on the Utah white population, and adjusted for age, sex, and calendar period. Significant deficits occurred for mortality from all causes (SMR 92, 95% confidence interval (95% CI) 90-95), all malignant neoplasms (SMR 90, 95% CI 83-97), ischaemic heart disease (SMR 93, 95% CI 88-98), non-malignant respiratory disease (SMR 87, 95% CI 76-98), and accidents (SMR 61, 95% CI 52-70). Mortality was raised for multiple myeloma (MM) in white women (SMR 236, 95% CI 87-514), non-Hodgkin's lymphoma (NHL) in white women (SMR 212, 95% CI 102-390), and cancer of the biliary passages and liver in white men dying after 1980 (SMR 358, 95% CI 116-836). Detailed analysis of the 6929 employees occupationally exposed to trichloroethylene, the most widely used solvent at the base during the 1950s and 1960s, did not show any significant or persuasive association between several measures of exposure to trichloroethylene and any excess of cancer. Women employed in departments in which fabric cleaning and parachute repair operations were performed had more deaths than expected from MM and NHL. The inconsistent mortality patterns by sex, multiple and overlapping exposures, and small numbers made it difficult to ascribe these excesses to any particular substance
Oñate, Esteban; Meyer, Felipe; Espinoza, Jorge
The range of sizes used in Chile for clothing comes from criteria developed in continental Europe, mainly the EN 13402 standard. Any standard adopted by a country should consider the anthropometric dimensions of the user population, particularly to discern the ratio of garments for different size. Consequently, the purpose of this study was to propose standards for the size of clothing based on anthropometric characteristics of a sample of Chilean miners. The study was conducted in 447 male workers. The age and body weight were measured in each workers as well as their percentage of body fat. Anthropometric measurements for garments were made according to the criteria of the European Community (EN 13402-1) and ISO (8559- 1989). Body dimensions for the design of gloves, shoes, helmets and caps, clothes that cover the upper part of the body and clothes that cover the lower part were measured. The results obtained made it possible to establish the percentage of workers falling within the range of sizes that manufacturers consider as reference. One of the main conclusions of the study is the need to carefully consider a set of complementary anthropometric measures, which can help to improve the comfort of costumes, to the extent that the providers adapt their designs to the characteristics of Chilean workers.
Road Edge of Pavement, Pavement Condition Ratings and Maintenance Designations per Street Centerline. Updated frequently by Public Works Streets Division, Published in 2006, 1:1200 (1in=100ft) scale, City of Asheville Government.
NSGIC Local Govt | GIS Inventory — Road Edge of Pavement dataset current as of 2006. Pavement Condition Ratings and Maintenance Designations per Street Centerline. Updated frequently by Public Works...
Koch, Paul Jacob; van Amstel, Marike Koch; Dębska, Patrycja
This paper investigates the concept of a sensor based robot co-worker working in flexible industrial environments together with and alongside human operators. In this particular work, a realisation of a robot co-worker scenario is developed in order to demonstrate the implementation of a robot co......-worker from the starting point of an autonomous industrial mobile manipulator. The cobot is applied on the industrially relevant task of screwing by the use of a skill-based approach. The technical work on the human-robot interface and the screwing skill is described....
Radican, Larry; Blair, Aaron; Stewart, Patricia; Wartenberg, Daniel
Objective To extend follow-up of 14,455 workers from 1990 to 2000, and evaluate mortality risk from exposure to trichloroethylene (TCE) and other chemicals. Methods Multivariable Cox models were used to estimate relative risk for exposed vs. unexposed workers based on previously developed exposure surrogates. Results Among TCE exposed workers, there was no statistically significant increased risk of all-cause mortality (RR=1.04) or death from all cancers (RR=1.03). Exposure-response gradients for TCE were relatively flat and did not materially change since 1990. Statistically significant excesses were found for several chemical exposure subgroups and causes, and were generally consistent with the previous follow up. Conclusions Patterns of mortality have not changed substantially since 1990. While positive associations with several cancers were observed, and are consistent with the published literature, interpretation is limited due to the small numbers of events for specific exposures. PMID:19001957
Chao, Yi-Chun E.; Kupper, Lawrence L.; Serdar, Berrin; Egeghy, Peter P.; Rappaport, Stephen M.; Nylander-French, Leena A.
Jet propulsion fuel 8 (JP-8) is the major jet fuel used worldwide and has been recognized as a major source of chemical exposure, both inhalation and dermal, for fuel-cell maintenance workers. We investigated the contributions of dermal and inhalation exposure to JP-8 to the total body dose of U.S. Air Force fuel-cell maintenance workers using naphthalene as a surrogate for JP-8 exposure. Dermal, breathing zone, and exhaled breath measurements of naphthalene were obtained using tape-strip sam...
Villarini, M; Moretti, M; Fatigoni, C; Agea, E; Dominici, L; Mattioli, A; Volpi, R; Pasquini, R
In tunnel construction workers, occupational exposure to dust (alpha-quartz and other particles from blasting), gases (nitrogen dioxide, NO(2)), diesel exhausts, and oil mist has been associated with lung function decline, induction of inflammatory reactions in the lungs with release of mediators that may influence blood coagulation, and increased risk of chronic obstructive pulmonary disease. The present molecular epidemiology study was designed to evaluate whether occupational exposure to indoor pollutants during road tunnel construction might result in genotoxic effects. A study group of 39 underground workers and a reference group of 34 unexposed subjects were examined. Primary and oxidative DNA damage, sister-chromatid exchanges (SCE), and micronuclei (MN) were measured in peripheral blood cells. The possible influences of polymorphisms in gene encoding for CYP1A1 and GSTM1 xenobiotic-metabolizing enzymes were also investigated. Exposure assessment was performed with detailed interviews and questionnaires. There were no significant differences in the level of primary and oxidative DNA damage and frequency of SCE between the tunnel workers and controls, whereas the frequency of MN showed a significant increase in exposed subjects compared to controls. No effects of CYP1A1 or GSTM1 variants were observed for the analyzed biomarkers. Since MN in peripheral blood lymphocytes are recognized as a predictive biomarker of cancer risk within a population of healthy subjects, the genotoxic risk of occupational exposure to various indoor environmental pollutants during road tunnel construction cannot be excluded by this biomonitoring study.
Full Text Available Not only do overloaded vehicles pose an increased safety risk on the road (reduced stability and braking efficiency etc.), but they also accelerate the rate of deterioration of the road network and increase road maintenance costs, which in turn...
Pryimak, V.; Kyiashko, I.
Characteristics of public roads operation have been considered and factors influencing TEC of public roads that go via urban areas have been determined. There have been revealed contradictions in the normative-legal base concerning maintenance of public roads and municipal roads that merge into them.
Dul, J.; Bolijn, A.J.; Delleman, N.J.; Hildebrandt, V.H.
In the steel industry musculoskeletal disorders are important determinants of sickness and absenteeism. Prevention of biomechanical risk is therefore important, both for industry and the workers themselves. In this research project, ergonomic guidelines have been developed to reduce high
Chao, Yi-Chun E; Kupper, Lawrence L; Serdar, Berrin; Egeghy, Peter P; Rappaport, Stephen M; Nylander-French, Leena A
Jet propulsion fuel 8 (JP-8) is the major jet fuel used worldwide and has been recognized as a major source of chemical exposure, both inhalation and dermal, for fuel-cell maintenance workers. We investigated the contributions of dermal and inhalation exposure to JP-8 to the total body dose of U.S. Air Force fuel-cell maintenance workers using naphthalene as a surrogate for JP-8 exposure. Dermal, breathing zone, and exhaled breath measurements of naphthalene were obtained using tape-strip sampling, passive monitoring, and glass bulbs, respectively. Levels of urinary 1- and 2-naphthols were determined in urine samples and used as biomarkers of JP-8 exposure. Multiple linear regression analyses were conducted to investigate the relative contributions of dermal and inhalation exposure to JP-8, and demographic and work-related covariates, to the levels of urinary naphthols. Our results show that both inhalation exposure and smoking significantly contributed to urinary 1-naphthol levels. The contribution of dermal exposure was significantly associated with levels of urinary 2-naphthol but not with urinary 1-naphthol among fuel-cell maintenance workers who wore supplied-air respirators. We conclude that dermal exposure to JP-8 significantly contributes to the systemic dose and affects the levels of urinary naphthalene metabolites. Future work on dermal xenobiotic metabolism and toxicokinetic studies are warranted in order to gain additional knowledge on naphthalene metabolism in the skin and the contribution to systemic exposure.
Merlo, Domenico Franco; Stagi, Elena; Fontana, Vincenzo; Consonni, Dario; Gozza, Claudia; Garrone, Elsa; Bertazzi, Pier Alberto; Pesatori, Angela Cecilia
A historical mortality cohort study was conducted in Genoa, Italy among public transport workers ever employed between 1949 and 1980, to estimate overall and cause-specific mortality from January 1970 to December 2005 and to examine associations between exposure to urban air pollutants and overall and cause-specific mortality. Causes of death for 9267 males (6510 bus drivers, 2073 maintenance workers and 601 white collar workers) were coded according to ICD-9. Standardised mortality ratios (SMRs) and 95% CIs were computed by applying Italian and regional male death rates to person-years of observation for the entire cohort and following stratification by longest held job title and length of and time since first employment using the Poisson regression model. There were 2916 deaths and 230,009 person-years of observation; 17 subjects were lost to follow-up. SMRs for all causes, diseases of the circulatory, respiratory, digestive and genitourinary systems, and for accidents were lower than expected. SMRs (95% CI) were increased for lung cancer (1.16, 1.05 to 1.28), non-Hodgkin's lymphoma (1.23, 0.85 to 1.78), Hodgkin's lymphoma (2.14, 1.19 to 3.87) and diabetes mellitus (1.16, 1.05 to 1.28). The SMR for leukaemia was 0.77 (0.51 to 1.16). Hodgkin's lymphoma mortality was significantly increased among bus drivers (1.62, 1.37 to 5.04). Lung cancer risk was significantly increased among all workers after 30 years' employment and among maintenance workers. The study failed to show any increased risk for leukaemias. The increased mortality from Hodgkin's lymphoma and lung cancer may be associated with long-term exposure to urban air pollution.
... transportation facility maintenance? 170.805 Section 170.805 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance § 170.805 What are the local... Road Maintenance dollars. ...
Israel Omar Mockey Coureaux
Full Text Available Se presenta un estudio acerca de la influencia de las acciones de mantenimiento en las instalaciones de alumbradoviario. Se abordan los aspectos relacionados con las causas de depreciación de estos sistemas y las acciones demantenimiento para su corrección. Se conceptualiza la eficiencia energética para el caso del alumbrado viario y semencionan todos los aspectos relacionados con ello. Los autores llaman la atención acerca de que frecuentementelos análisis para incrementar la eficiencia de estos sistemas de alumbrado solo se centran en las posibilidades decambio y mejoramiento de las lámparas, balastos, luminarias, así como las técnicas de regulación y control. En elartículo se hace énfasis en cómo a través del establecimiento del programa de mantenimiento que se defina sepuede impactar en la eficiencia energética desde la etapa de diseño y durante su explotación, resaltando laspotencialidades en esta vía poco estudiada hasta este momento. A study about maintenance actions influences in road lighting efficiency is presented. The aspects related with thecauses of the luminous depreciation of road lighting systems and the maintenance actions are approached for theircorrection. The energy efficiency is conceptualized for the road lighting case and all the aspects can be impacted toincrease it are mentioned. The authors emphasis stands out that attention that usually the analyses to increase theefficiency of these systems is frequently focused only on the possibilities of change and improvement of the lamps,ballasts, luminaries and the control and regulation techniques to increase the efficiency of road lighting. The paperanalyses how through a maintenance schedule it can impact on the energy efficiency from the design stage andduring their exploitation, standing out the potentialities in this way little studied until this moment.
Zouch, M.; Courage, W.; Napoles-Morales, O.
We present a framework for road network management to assist road authorities in maintenance budget estimations and long-term maintenance strategies definition. Information about road conditions is obtained from monitoring. Available data are used to estimate and update prediction of degradation
Pankratz, Curt J
Fatal accidents often lead to policy changes. However, the existing decision-making environment is critical to policy responses. This study compares the policy responses to similar events in Manitoba and Saskatchewan. The key question explores the extent to which the policy decisions in each province differ despite the similarity of the events. Key documents were examined. Provincial court rulings, workplace health & safety incident investigation reports, court transcripts and police reports were used to compare resulting policy changes as well as the socio-political and economic decision-making context. Relevant clauses in resulting legislation were also compared to assess the specific changes that were made in each province. In each province, a young, female highway construction worker was killed. However, the provinces responded in very different ways. In Saskatchewan, the Premier called for recommendations to improve worker safety, initiating an in-depth governmental study and the development of a broad safety strategy. In Manitoba, political and social pressures shifted the decision-making environment and contributed to the rushed passing of a bill focused on traffic fine increases that resulted in record-breaking traffic fine revenue while failing to include broader safety measures. Different decision-making contexts can lead to vastly different policy outcomes even when responding to very similar events. Key differences included time constraints, access to information and the nature of the political process invoked.
Nakai, Satoru; Nishio, Ryuichi; Uchihashi, Masaya; Kaneko, Yoshihisa; Yamashita, Hironobu; Yamaguchi, Atsunori; Aoki, Takayuki
A sodium cooled fast breeder reactor (FBR) has unique systems and components and different degradation mechanism from light water reactor (LWR) so that need to establish maintenance technology in accordance with its features. The examination of the FBR maintenance technology is carried out in the special committee for considering the maintenance for Monju established in the Japan Society of Maintenology (JSM). As a result of the study such as extraction of Monju maintenance feature, maintenance technology benchmark between Monju and LWR components and survey of LWR maintenance experience, it is clear that principles of maintenance are same as LWR, necessity of LWR maintenance experience reflection and points to be considered in Monju maintenance. The road map to establish a FBR maintenance technology in the technical aspect became clear and it is vital to acquire operation and maintenance experience of the plant to implement this road map, and to establish a fast reactor maintenance. (author)
Ayala Carcedo, F J; Ortiz, D U.F.P.; Lopez, J C; Rodriguez Ortiz, J M; Kraemer, H C; Val, M M.A.D.
The publication gives some easy guide-lines for the design and execution of surface mine roads, and their auxiliary elements, within the technical possibilities and equipment normally available in mining operations. A methodology for the mining haulage is proposed, taking into consideration the geometric and functional conditions of the surface mine haulage road and the vehicles used. 25 refs., 58 figs., 31 tabs., 10 photos.
... construction, reconstruction, decommissioning, and maintenance. (2) Identification of unneeded roads... share of the costs. (d) Maintenance and reconstruction of National Forest System roads by users—(1... to cover maintenance or reconstruction of roads shall be used for the purposes deposited, except that...
In addition, the rules and regulations of the public administrative system do not allow for an effective and efficient management of road maintenance. Lack of equipment and adequate qualified personnel in the field of road maintenance is too an added deficiency. As a consequence, Tanzania has started to put road ...
Kumar, Anil; Yadav, Anita; Giri, Shiv Kumar; Dev, Kapil; Gautam, Sanjeev Kumar; Gupta, Ranjan; Aggarwal, Neeraj
In the present study, we have investigated the influence of polymorphism of GSTM1 and GSTT1 genes and confounding factors such as age, sex, exposure duration and consumption habits on cytogenetic biomarkers. Frequency of sister chromatid exchanges (SCEs), high frequency cell (HFC) and cytokinesis blocked micronuclei (CBMN) were evaluated in peripheral blood lymphocytes of 115 occupationally exposed road construction workers and 105 unexposed individuals. The distribution of null and positive genotypes of glutathione-S transferase gene was evaluated by multiplex PCR among control and exposed subjects. An increased frequency of CBMN (7.03±2.08); SCE (6.95±1.76) and HFC (6.28±1.69) were found in exposed subjects when compared to referent (CBMN - 3.35±1.10; SCE - 4.13±1.30 and HFC - 3.98±1.56). These results were found statistically significant at p<0.05. When the effect of confounding factors on the frequency of studied biomarkers was evaluated, a strong positive interaction was found. The individuals having GSTM1 and GSTT1 null genotypes had higher frequency of CBMN, SCE and HFC. The association between GSTM1 and GSTT1 genotypes and studied biomarkers was found statistically significant at p<0.05. Our findings suggest that individuals having null type of GST are more susceptible to cytogenetic damage by occupational exposure regardless of confounding factors. There is a significant effect of polymorphism of these genes on cytogenetic biomarkers which are considered as early effects of genotoxic carcinogens. Copyright © 2011 Elsevier Ltd. All rights reserved.
Hartmann, Andreas; Ling, F.Y.Y.
Although road agencies need to provide road infrastructure that is beneficial for road users, little is known about how the activities of the agencies influence the value creation of road infrastructure. From a service-dominant logic perspective, the importance of road maintenance and traffic
Israel Omar Mockey- Coureaux
Full Text Available Se presenta un estudio acerca de la influencia de las acciones de mantenimiento en las instalaciones de alumbrado viario. Se abordan los aspectos relacionados con las causas de depreciación de estos sistemas y las acciones de mantenimiento para su corrección. Se conceptualiza la eficiencia energética para el caso del alumbrado viario y se mencionan todos los aspectos relacionados con ello. Los autores llaman la atención acerca de que frecuentemente los análisis para incrementar la eficiencia de estos sistemas de alumbrado solo se centran en las posibilidades de cambio y mejoramiento de las lámparas, balastos, luminarias, así como las técnicas de regulación y control. En el artículo se hace énfasis en cómo a través del establecimiento del programa de mantenimiento que se defina se puede impactar en la eficiencia energética desde la etapa de diseño y durante su explotación, resaltando las potencialidades en esta vía poco estudiada hasta este momento.A study about maintenance actions influences in road lighting efficiency is presented. The aspects related with the causes of the luminous depreciation of road lighting systems and the maintenance actions are approached for their correction. The energy efficiency is conceptualized for the road lighting case and all the aspects can be impacted to increase it are mentioned. The authors emphasis stands out that attention that usually the analyses to increase the efficiency of these systems is frequently focused only on the possibilities of change and improvement of the lamps, ballasts, luminaries and the control and regulation techniques to increase the efficiency of road lighting. The paper analyses how through a maintenance schedule it can impact on the energy efficiency from the design stage and during their exploitation, standing out the potentialities in this way little studied until this moment.
Minnesota Department of Natural Resources — This data set contains roadway centerlines for miscellanous roads, a catch-all category for all road types not present in the other DNR derived products. These road...
Division of Roads
Full Text Available The purpose of this manual is to provide guidelines on the upgrading of gravel low volume roads to roads and maintenance personnel of road authorities of all sizes. Low volume is, for the purpose of this document, defined to be less than 500...
... 25 Indians 1 2010-04-01 2010-04-01 false What is emergency maintenance? 170.812 Section 170.812 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance § 170.812 What is emergency maintenance? Emergency maintenance is work that...
One of the major responsibilities of state Departments of Transportation (DOTs) is to maintain their road assets so : that road users can travel cost effectively, safely, and in a timely manner. Maintenance projects can be performed : either by using...
Mara, Leo M.
Disclosed is a rapid road repair vehicle capable of moving over a surface to be repaired at near normal posted traffic speeds to scan for and find an the high rate of speed, imperfections in the pavement surface, prepare the surface imperfection for repair by air pressure and vacuum cleaning, applying a correct amount of the correct patching material to effect the repair, smooth the resulting repaired surface, and catalog the location and quality of the repairs for maintenance records of the road surface. The rapid road repair vehicle can repair surface imperfections at lower cost, improved quality, at a higher rate of speed than was was heretofor possible, with significantly reduced exposure to safety and health hazards associated with this kind of road repair activities in the past.
Metadata only record This book addresses the construction and maintenance of unpaved rural roads including strategies, techniques and practices for dealing with problems frequently encountered by landowners, land managers and maintenance personnel. Running water is the primary force affecting road condition and generating the need for maintenance. Economical maintenance means dealing effectively with water, but not just surface runoff. Standing water, seeping water, rain, snow, ice, frost ...
... responsibility of the State. The State may arrange for maintenance of such roads or portions thereof, by... 23 Highways 1 2010-04-01 2010-04-01 false Maintenance. 633.208 Section 633.208 Highways FEDERAL... PROVISIONS Federal-Aid Contracts (Appalachian Contracts) § 633.208 Maintenance. Maintenance of all highway...
... Nonattainment and Maintenance Areas'' (EPA-420-B-10-040, December 2010). \\2\\ For estimating road dust from... maintenance areas and any PM 2.5 nonattainment and maintenance areas where re-entrained road dust is a... January 2011 AP-42 Method for Estimating Re-Entrained Road Dust From Paved Roads AGENCY: Environmental...
... investments in NFS roads; and require commercial users to perform road maintenance commensurate with their use... commercial users to perform maintenance commensurate with their road use. Section 261.10 contains a national... appropriate investment sharing arrangements, require commercial users of NFS roads to perform maintenance...
Laffray, Xavier; Alaoui-Sehmer, Laurence; Bourioug, Mohamed; Bourgeade, Pascale; Alaoui-Sossé, Badr; Aleya, Lotfi
Salt is widely used to melt snow on roads especially in mountain regions. Whether as rock salt or aerosols, spread or sprayed over road surfaces, salt may result in increased salt concentrations in soils, which, in turn, affect natural vegetation, especially tree seedlings already subjected to various other types of abiotic stress. The authors investigated the effects of salt treatment-related stress on seedling growth and certain biochemical parameters in Quercus robur to determine ion concentrations in root tips. Seedlings growing in a quartz sand/vermiculite mixture were subjected to NaCl concentrations of 0, 50, or 100 mM for 5 weeks. The results showed that high NaCl concentrations caused a marked reduction in total leaf biomass 55 and 75% for 50 and 100 mM treatments, respectively, in dry weight of stems (84%) and roots (175%) for 100 mM treatment and modified root architecture, whereas no changes appeared in leaf number. A non-significant decrease in relative water content, with changes in ion balance was recorded. Comparison of stressed to control plants show an increase in sodium (3.5-8-fold), potassium (0.6-fold), and chloride (9.5-14-fold) concentrations in the root tips while the K + /Na + ratio decreased. In taproots, no significant biochemical differences were observed between the salt-treated and the control plants for acid invertase activity, reducing sugars, sucrose, or soluble protein contents. The significance of ion and sugar accumulations in relation to osmotic adjustment and the ability of oak seedlings to cope with salt stress are discussed.
Full Text Available Suboptimal haul road management policies such as routine, periodic and urgent maintenance may result in unnecessary cost, both to roads and vehicles. A recent idea is to continually access haul road condition based on measured vehicle response...
U.S. Environmental Protection Agency — Road density is generally highly correlated with amount of developed land cover. High road densities usually indicate high levels of ecological disturbance. More...
in the Geography, and the world-view, of Strabo. Strabo did not take much interest in roads as artefacts or monuments, in the technology of road construction, or in the mythological and historical background of individual roads. He is primarily interested in roads from a functional point of view. For the general......To ancient geographers, roads were important not only as arteries of communication, but also as sources of information, since mileages measured along the Roman highways were among the very few precise distances available to the ancient geographer. This chapter explores the place of roads...... or the statesman, roads provide routes of communication; for the systematic geographer, they provide measured distances and directions. Through case studies of Spain, Gaul, Italy, Greece and Anatolia, this chapter attempts to reach a better understanding of the place of roads in Strabo’s universe, especially two...
Montgomery County of Maryland — This is an up to date map of current road closures in Montgomery County.This dataset is updated every few minutes from the Department of Transportation road closure...
Mohd Razelan Intan Suhana
Full Text Available In most countries, crash statistics have becoming very crucial in evaluating road’s safety level. In Malaysia, these data are very important in deciding crash-prone areas known as black spot where specific road improvements plan will be proposed. However due to the unavailability of reliable crash data in many developing countries, appropriate road maintenance measures are facing great troubles. In light of that, several proactive methods in defining road’s safety level such as Road Assessment Program (RAP have emerged. This research aim to compare two proactive methods that have been tested in Malaysian roads ; road assessment program and road environment risk index which was developed based on composite index theory in defining road’s safety level. Composite road environment risk index was combining several crucial environment indicators, assigning weight and aggregating the individual index together to form a single value representing the road’s safety level. Based on the results, it can be concluded that both road assessment program and composite road environment risk index are contradicted in six different ways such as type of speed used, type of analysis used and their final outcomes. However, with an aim to promote safer roads, these two methods can be used concurrently as the outcomes in both methods seems to fulfil each other’s gap very well.
FHWAs Road Weather Management Program developed : a Prototype Road Weather Management (RW-PM) Tool : to help DOTs maximize the effectiveness of their maintenance : resources and efficiently adjust deployments dynamically, : as road conditions and ...
Stawowiak, Michał; Kuczaj, Mariusz
This article refers to the reliability of road rollers used in a selected roadworks company. Information on the method of road rollers service and how the service affects the reliability of these rollers is presented. Attention was paid to the process of the implemented maintenance plan with regard to the machine's operational time. The reliability of road rollers was analyzed by determining and interpreting readiness coefficients.
This Operations and Maintenance (O and M) Philosophy document is intended to establish a future O and M vision, with an increased focus on minimizing worker exposure, ensuring uninterrupted retrieval operations, and minimizing operation life-cycle cost. It is intended that this document would incorporate O and M lessons learned into on-going and future project upgrades
Kuhl, K.; Terwoert, J.; Cabecas, J.J.M.
Maintenance workers come into close contact with a broad variety of often hazardous chemicals. Depending on the specific type, these chemicals may not only cause diseases like skin sores or cancer, but many of them are highly flammable and explosive. This e-facts focuses on the specific risks
... AND WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance § 170.806 What is an IRR Transportation Facilities Maintenance Management System? An IRR Transportation Facilities Maintenance Management... 25 Indians 1 2010-04-01 2010-04-01 false What is an IRR Transportation Facilities Maintenance...
Full Text Available simple patching of potholes and sealing of cracks to a reseal of the road or even recycling and rehabilitation of the failed sections of the road. These maintenance actions affect the surfacing of the road and therefore the experience of the tyre...
Full Text Available Environmental pollution is a major problem in developing countries like Egypt. Reuse of waste polymers is considered an attractive solution for environmental white pollution and reducing of the costs of road pavement and maintenance. This research aims to prepare environmentally friendly hot mix asphalt (HMA for paving using some industrial wastes as polypropylene and polyester fibers. The solid materials in the mix include normal and highly porous aggregates. 5% and 10% of waste polymers by weight of the asphalt were used to prepare special binders. The samples were tested for their physical properties, chemical properties, aging, scanning electron microscopy (SEM and thermo-gravimetric analysis (TGA. The results revealed that the prepared HMA using 5% of waste polymer had high performance as compared to the ordinary one and the waste polymer could be used in road construction.
Earth Data Analysis Center, University of New Mexico — This data set contains a 1:100,000 scale vector digital representation of all interstate highways, all US highways, most of the state highways, and some county roads...
Minnesota Department of Natural Resources — This data set contains roadway centerlines for major roads (interstates and trunk highways) found on the USGS 1:24,000 mapping series. These roadways are current...
Hietbrink, M.; Hartmann, Andreas; Dewulf, Geert P.M.R.
Understanding the process of stakeholder satisfaction is a prerequisite for successful stakeholder management. The expectancy disconfirmation model describes the process of stakeholder satisfaction by relating customers’ satisfaction with a product or service to discrepancy between the perceived
Silva, Nuno; Shah, Vaibhav; Soares, João; Rodrigues, Helena
Anomalies on road pavement cause discomfort to drivers and passengers, and may cause mechanical failure or even accidents. Governments spend millions of Euros every year on road maintenance, often causing traffic jams and congestion on urban roads on a daily basis. This paper analyses the difference between the deployment of a road anomalies detection and identification system in a “conditioned” and a real world setup, where the system performed worse compared to the “conditioned” setup. It also presents a system performance analysis based on the analysis of the training data sets; on the analysis of the attributes complexity, through the application of PCA techniques; and on the analysis of the attributes in the context of each anomaly type, using acceleration standard deviation attributes to observe how different anomalies classes are distributed in the Cartesian coordinates system. Overall, in this paper, we describe the main insights on road anomalies detection challenges to support the design and deployment of a new iteration of our system towards the deployment of a road anomaly detection service to provide information about roads condition to drivers and government entities.
Chinowsky, P.; Arndt, Channing
to estimate the impact of individual climate stressors on road infrastructure in Mozambique. Through these models, stressor–response functions are introduced that quantify the cost impact of a specific stressor based on the intensity of the stressor and the type of infrastructure it is affecting. Utilizing...... four climate projection scenarios, the paper details how climate change response decisions may cost the Mozambican government in terms of maintenance costs and long-term roadstock inventory reduction. Through this approach the paper details how a 14% reduction in inventory loss can be achieved through...
National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the state maintained primary and secondary road network of Louisiana. Vector lines in the data set represent Interstates, U.S. Highways, and...
Beer, N. Reginald; Paglieroni, David W
A system that detects damage on or below the surface of a paved structure or pavement is provided. A distributed road assessment system includes road assessment pods and a road assessment server. Each road assessment pod includes a ground-penetrating radar antenna array and a detection system that detects road damage from the return signals as the vehicle on which the pod is mounted travels down a road. Each road assessment pod transmits to the road assessment server occurrence information describing each occurrence of road damage that is newly detected on a current scan of a road. The road assessment server maintains a road damage database of occurrence information describing the previously detected occurrences of road damage. After the road assessment server receives occurrence information for newly detected occurrences of road damage for a portion of a road, the road assessment server determines which newly detected occurrences correspond to which previously detected occurrences of road damage.
Wangchuk, Tenzin; Knibbs, Luke D.; He, Congrong; Morawska, Lidia
Human exposures in transportation microenvironments are poorly represented by ambient stationary monitoring. A number of on-road studies using vehicle-based mobile monitoring have been conducted to address this. Most previous studies were conducted on urban roads in developed countries where the primary emission source was vehicles. Few studies have examined on-road pollution in developing countries in urban settings. Currently, no study has been conducted for roadways in rural environments where a substantial proportion of the population live. This study aimed to characterize on-road air quality on the East-West Highway (EWH) in Bhutan and identify its principal sources. We conducted six mobile measurements of PM10, particle number (PN) count and CO along the entire 570 km length of the EWH. We divided the EWH into five segments, R1-R5, taking the road length between two district towns as a single road segment. The pollutant concentrations varied widely along the different road segments, with the highest concentrations for R5 compared with other road segments (PM10 = 149 μg/m3, PN = 5.74 × 104 particles/cm-3, CO = 0.19 ppm), which is the final segment of the road to the capital. Apart from vehicle emissions, the dominant sources were road works, unpaved roads and roadside combustion activities. Overall, the highest contributions above the background levels were made by unpaved roads for PM10 (6 times background), and vehicle emissions for PN and CO (5 and 15 times background, respectively). Notwithstanding the differences in instrumentation used and particle size range measured, the current study showed lower PN concentrations compared with similar on-road studies. However, concentrations were still high enough that commuters, road maintenance workers and residents living along the EWH, were potentially exposed to elevated pollutant concentrations from combustion and non-combustion sources. Future studies should focus on assessing the dispersion patterns of
The pollutant load in road runoff is related to traffic densities and road maintenance activities. Inurbanised areas treatment of road runoff is common and often considered necessary. The pollutantsare partitioned between the particulate and dissolved matter. However, the contaminantstend to have an affinity to the particulate material. Sedimentation, the predominant treatmentmethod for road runoff uses various types of ponds. Design tools used for stormwater treatmentsystems are based on ext...
Hakjun Rhee; James Fridley; Deborah Page-Dumroese
Traffic can alter forest road aggregate material in various ways, such as by crushing, mixing it with subgrade material, and sweeping large-size, loose particles (gravel) toward the outside of the road. Understanding the changes and physical processes of the aggregate is essential to mitigate sediment production from forest roads and reduce road maintenance efforts. We...
The problems involved in constructing lunar roads are explored. The main challenges are airlessness, low gravity, and solar effects, especially temperature extremes. Also involved are the expense of delivering equipment and material to the job site (especially for bridges and other structures), obtaining skilled labor, and providing maintenance. The lunar road will most likely be gravel, but with the size of the material closer to cobblestone to reduce scattering. They will probably be very winding, even on the flats, and feature numerous bridges and some cuts. This traffic will be mostly automatic or teleoperated cargo carriers with a handful of shirtsleeve-pressurized 'passenger cars' large enough to live in for several days.
Arun Kumar Agnihotri
Jan 13, 2016 ... seven hundred and seventy seven (777) fatal road traffic accidents were reported during ... the influence of alcohol, riding without restraint, poor vehicle maintenance ..... emphasize on the road posters signal rules and regular ...
smaller patches by rural roads network with significant edge effects on plant species composition and abundance. In this study .... information and road inventory details. ... field tests of anti-erosion and maintenance techniques on terrene rural ...
Roads have varied ecological impacts on the adjacent plant and soil environment due to physical and chemical disturbances resulting from roadway construction, roadside maintenance, and vehicle deposition. The two main areas influenced by a road are t...
From Monday 11 October until Friday 29 October 2010, the flow of traffic will be disrupted by road works at the roundabout in front of Restaurant No. 2; The number of spaces available in the car park in front of Rest. No. 2 will be reduced. Thank you for your understanding during this period. GS/SEM Group
Verhoef, Erik T.
This paper studies the efficiency impacts of private toll roads in initially untolled networks. The analysis allows for capacity and toll choice by private operators, and endogenizes entry and therewith the degree of competition, distinguishing and allowing for both parallel and serial competition.
British Columbia's vast network of resource roads are considered to be amongst the most dangerous, high-risk workplaces in the province. Resource roads, also known as industrial roads, forest service roads, or petroleum development roads, present several unique safety challenges as workplaces. They are built for the purpose of access, egress and transport of materials, resources, equipment and people. However, the lack the same diligence of enforcement and a consistent design, construction, maintenance and standard for use as public highways or municipal roads. There are also safety challenges related to public use of resource roads. This report presented a project, called ResourceRoads by WorkSafe BC that focused on the organization and implementation of a management structure that would provide a system of coordination and a process of compliance for the users of the defined road systems. The project was based on information gathered in two forest districts of Prince George and the South Peace Forest Districts. A committee consisting of the actual owner of the road and other users was formed. The report presented a history of British Columbia's resource road system, and discussed resource roads as industrial workplaces and worksites, as well as resource road fatality statistics. The demonstration project was outlined in terms of project leadership; scope; strategic objectives; project purpose; performance objectives; project communication; demonstration areas; and project stages. Project fundamentals and project findings were also presented along with recommendations and responses to the Auditor General report and the Forest Safety Ombudsman report. It was concluded that potential uses of new technologies for resource road vehicles should be reviewed. tabs., figs.
Full Text Available in most countries. In South Africa they make up more than 75 per cent of the total road network and probably 95 per cent of the low volume road network. Unsealed roads come with various disadvantages over sealed roads, primarily the ongoing... and continual maintenance as well as the accompanying environmental problems. The maintenance, whether grader blading to restore riding quality or replacing the gravel lost under traffic and environmental actions is both costly and disruptive to the normal...
... maintenance? 170.811 Section 170.811 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance § 170.811 What happens if lack of funds results in inadequate maintenance? If BIA determines that an IRR transportation facility is not being...
Korpinen, Leena; Pääkkönen, Rauno
The objective of the study was to investigate occupational exposure to electric fields during the task 'maintenance of an operating device of circuit breaker from a service platform' at 110-kV substations. The aim was also to compare the results to Directive 2013/35/EU. At 16 substations, 255 electric field measurements were performed. The highest mean value of the electric fields was 9.6 kV⋅m -1 . At 63% of substations the maximum values were over 10.0 kV⋅m -1 , and at 31% of the substations the 75th percentiles were over 10.0 kV⋅m -1 , which is the low action level (AL) according to Directive 2013/35/EU. All measured values were below the high AL (20.0 kV⋅m -1 ). In the future, it is important to take into account that the measurements were only taken at Finnish 110-kV substations; therefore, it is not possible to generalize these results to other countries and different types of substations.
This book explores the domain of software maintenance management and provides road maps for improving software maintenance organizations. It describes full maintenance maturity models organized by levels 1, 2, and 3, which allow for benchmarking and continuous improvement paths. Goals for each key practice area are also provided, and the model presented is fully aligned with the architecture and framework of software development maturity models of CMMI and ISO 15504. It is complete with case studies, figures, tables, and graphs.
Yang, Chao; Remenyte-Prescott, Rasa; Andrews, John D.
This paper presents a new pavement management system (PMS) to achieve the optimal pavement maintenance and rehabilitation (M&R) strategy for a highway network using genetic algorithms (GAs). Optimal M&R strategy is a set of pavement activities that both minimise the maintenance cost of a highway network and maximise the pavement condition of the road sections on the network during a certain planning period. NSGA-II, a multi-objective GA, is employed to perform pavement maintenance optimisatio...
Sanchis, H.; Aucher, P.
The maintenance method applied at the Hague is summarized. The method was developed in order to solve problems relating to: the different specialist fields, the need for homogeneity in the maintenance work, the equipment diversity, the increase of the materials used at the Hague's new facilities. The aim of the method is to create a knowhow formalism, to facilitate maintenance, to ensure the running of the operations and to improve the estimation of the maintenance cost. One of the method's difficulties is the demonstration of the profitability of the maintenance operations [fr
The United States and Canada lag Europe and Singapore in implementing road pricing on a large scale. But the two countries have shown interest in tolling roads as a way to curb congestion and to generate revenues. The US is funding congestion pricing demonstration projects through its Value Pricing Pilot Program, and Canada has examined new ways to charge for road use and to finance road construction and maintenance. This paper reviews the current state of road pricing and funding...
Sowerby, Chris; Langstraat, James; Harmer, Clare
National Road Administrations (NRAs) across Europe strive to improve the performance of their road networks. This improvement has been underpinned by significant research in the optimisation of road planning, design, construction and maintenance, which has enhanced the understanding of the social......, environmental and economic aspects of managing a road network. Whilst there is common understanding in some aspects of sustainability there is not a common understanding of sustainability as a whole and thus how to benchmark and improve overall performance. The Sustainability: National Road Administrations...
Full Text Available The article presents basic principles and solutions for the application of Asset Management as part of road administration in Slovakia. It deals with application of Assets management methods and best practices of global trends in road maintenance, repair and rehabilitation strategies. An effective public Asset Management combines principles and strategies of asset management used in private sector with sound practices and methods proven to be applicable by public road administrator and his digital information systems. The under-funding of road management leads to development of tools and methods, which enable us to define criteria for establishing priorities for investments into road assets.
Roimela, Petri; Salmenkaita, Seppo; Maijala, Pekka; Saarenketo, Timo
Public funding for road network maintenance has decreased 30% during the last few years in Finland. Reduced resources, together with the current rehabilitation strategies, will in the long term result in increasing deterioration of the Finnish road network. For this reason road rehabilitation funding should be focused more specifically on those roads and road sections requiring measures and these measures should be optimized to ensure that only the specific problem structure will be repaired. Roadscanners Oy, in cooperation with the Finnish National Road Administration (Finnra), has developed a new and effective Road Analysis technique to survey the condition of roads and road networks. Road Analysis is based on the integrated analysis of the measured data collected from the road under survey. The basic survey methods used in Road Analysis include Ground Penetrating Data (GPR), falling weight deflectometer (FWD), roughness and rutting measurements, pavement distress mapping and GPS-positioning, as well as reference drilling based on preliminary GPR data analysis. The collected road survey data is processed, interpreted, analyzed and classified using Road Doctor software, specifically developed for this purpose. GPR measurements in road analysis are carried out using a 400 MHz ground-coupled antenna and a 1.0 GHz horn antenna. Horn antenna data is used to measure the thickness of the pavement and base course layers, as well as to evaluate their quality based on their dielectric properties. The 400 MHz ground-coupled data is used to estimate the thickness of the pavement structure and embankment. Ground-coupled antenna data is used for subgrade quality estimations and in evaluating the causes of subgrade- related frost defects. GPR data also provides important location information about special structures, such as steel reinforcements, cables and pipelines. Road Analysis includes a classification of the critical elements affecting the lifetime of the road: (1
NOR A. M. NASIR
Full Text Available A road is a medium that a person uses to move from one destination to another. A good road can provide comfort and safety to users, however, poor maintenance of a road might cause danger to them. Therefore, a road maintenance management system needs to be carried out to ensure the effectiveness as well as the efficiency of road maintenance itself. In this era, there are so many systems created in order to help data storage and analysis. One of the systems is the Geographic Information System (GIS. Other than getting the location of distresses, GIS also can help to classify the severity level of distresses and to correlate the distresses occurring in Universiti Kebangsaan Malaysia (UKM with the slope gradient. Road distress data was collected using GPS applications supported by Supersurv 3 software. The study shows that the GIS method helps to produce a good spatial database. The road gradient factor is related to the level of road damage.
Vonk Noordegraaf, D.M.
Urban areas suffer from the negative externalities of road transport like congested road networks, air pollution and road traffic accidents. A measure to reduce these negative externalities is road pricing, meaning policies that impose direct charges on road use (Jones and Hervik, 1992). Since the
Full Text Available City of Kragujevac struggles with providing road maintenance services due to limited funds and low capacity within the existing Public Utility Companies. As a solution to problems with traditional methods of contracting, many road authorities have moved to contracting road maintenance works to the private sector based on performance measures. The paper presents the outcomes of the study conducted for the purpose of improving current practice and condition of urban network within the City of Kragujevac through the application of performance-based maintenance contracting.
Laboratory tests have given good experiences to develop the technology of building transport roads for truck on peat bogs. The experiences can be summarized in the following points: The bearing capacity can be increased 15-20 times by mixing down, to the depth of 0,5 m, a mixture of gypsum and T-lime. high bearing surface capacity has been achieved at laboratory tests by mixing sulfonated lignin/sodiumbichromate or cement into peat. These mixtures can take a load of 610 kPa will be tested in the field. An ordinary base machine can be used with some modifications for the new technique. Costs for building roads and stores with the new technique can save 6 MSEK/year in Sweden. Remainig problems at full scale tests are: Testroads should be built to get knowledge of settlement, bearing capacity cost of maintenance etc. Heavy metals pollution. Machinery for transportation and admixture of the stabilizing agents must be deloped. By experience a good mixture between firm soil and peat is difficult to achieve. Technique and dimensioning to make a soft mixture ought to be studied.
Full Text Available Rough roads influence the safety of the road users as accident rate increases with increasing unevenness of the road surface. Road roughness regions are required to be efficiently detected and located in order to ensure their maintenance. Mobile Laser Scanning (MLS systems provide a rapid and cost-effective alternative by providing accurate and dense point cloud data along route corridor. In this paper, an automated algorithm is presented for detecting road roughness from MLS data. The presented algorithm is based on interpolating smooth intensity raster surface from LiDAR point cloud data using point thinning process. The interpolated surface is further processed using morphological and multi-level Otsu thresholding operations to identify candidate road roughness regions. The candidate regions are finally filtered based on spatial density and standard deviation of elevation criteria to detect the roughness along the road surface. The test results of road roughness detection algorithm on two road sections are presented. The developed approach can be used to provide comprehensive information to road authorities in order to schedule maintenance and ensure maximum safety conditions for road users.
Kumar, P.; Angelats, E.
Rough roads influence the safety of the road users as accident rate increases with increasing unevenness of the road surface. Road roughness regions are required to be efficiently detected and located in order to ensure their maintenance. Mobile Laser Scanning (MLS) systems provide a rapid and cost-effective alternative by providing accurate and dense point cloud data along route corridor. In this paper, an automated algorithm is presented for detecting road roughness from MLS data. The presented algorithm is based on interpolating smooth intensity raster surface from LiDAR point cloud data using point thinning process. The interpolated surface is further processed using morphological and multi-level Otsu thresholding operations to identify candidate road roughness regions. The candidate regions are finally filtered based on spatial density and standard deviation of elevation criteria to detect the roughness along the road surface. The test results of road roughness detection algorithm on two road sections are presented. The developed approach can be used to provide comprehensive information to road authorities in order to schedule maintenance and ensure maximum safety conditions for road users.
Boards of education must be convinced that spending money up front for preventive maintenance will, in the long run, save districts' tax dollars. A good program of preventive maintenance can minimize disruption of service; reduce repair costs, energy consumption, and overtime; improve labor productivity and system equipment reliability; handle…
Millennium Challenge Corporation — The key research questions guiding our design of the RRRP evaluation are: • Did rehabilitating roads affect the quality of roads? • Did rehabilitating roads improve...
Thompson, Matthew; Sessions, John
To mitigate the adverse environmental impact of forest roads, especially degradation of endangered salmonid habitat, many public and private land managers in the western United States are actively decommissioning roads where practical and affordable. Road decommissioning is associated with reduced long-term environmental impact. When decommissioning a road, it may be possible to recover some aggregate (crushed rock) from the road surface. Aggregate is used on many low volume forest roads to reduce wheel stresses transferred to the subgrade, reduce erosion, reduce maintenance costs, and improve driver comfort. Previous studies have demonstrated the potential for aggregate to be recovered and used elsewhere on the road network, at a reduced cost compared to purchasing aggregate from a quarry. This article investigates the potential for aggregate recycling to provide an economic incentive to decommission additional roads by reducing transport distance and aggregate procurement costs for other actively used roads. Decommissioning additional roads may, in turn, result in improved aquatic habitat. We present real-world examples of aggregate recycling and discuss the advantages of doing so. Further, we present mixed integer formulations to determine optimal levels of aggregate recycling under economic and environmental objectives. Tested on an example road network, incorporation of aggregate recycling demonstrates substantial cost-savings relative to a baseline scenario without recycling, increasing the likelihood of road decommissioning and reduced habitat degradation. We find that aggregate recycling can result in up to 24% in cost savings (economic objective) and up to 890% in additional length of roads decommissioned (environmental objective).
The Colorado Department of Transportation (CDOT) has been trying to identify the most effective methods for managing low-volume roads (LVRs). These roads are facing multiple challenges including: reductions in maintenance budgets, impact of industria...
Wessels, J.; Alten, K.; Turk, M.R.; Palić, S.Š.
Infrastructure stakeholders expect maintenance managers to deliver acceptable End User Service Levels (EUSL), such as availability, comfort, and safety. Means of controlling these requirements involve technical maintenance and operative measures. Within the ERANET Road Program 'Effective asset
Silliman, B. A.; Myers Toman, E.
Unbound rural roads are thought to be one of the largest anthropogenic sources of sediment reaching stream channels in small watersheds. This sediment deposition can reduce water quality in the streams negatively impacting aquatic habitat as well as impacting municipal drinking water sources. These roads are thought to see an increase in construction and use in southeast Ohio due to the expansion of shale gas development in the region. This study set out to quantify the amount of sediment these rural roads are able to produce. A controlled rain event of 12.7 millimeters of rain over a half hour period was used to drive sediment production over a 0.03 kilometer section of gravel rural road. These 8 segments varied in many characteristics and produced from 2.0 to 8.4 kilograms of sediment per 0.03 kilometers of road with the average production over the 8 segments being 5.5 kilograms of sediment. Sediment production was not strongly correlated with road segment slope but traffic was found to increase sediment production from 1.1 to 3.9 times as much sediment after traffic use. These results will help inform watershed scale sediment budgeting, and inform best management practices for road maintenance and construction. This study also adds to the understanding of the impacts of rural road use and construction associated with the changing land use from agricultural to natural gas extraction.
Comparison of maintenance worker's human error events occurred at United States and domestic nuclear power plants. The proposal of the classification method with insufficient knowledge and experience and the classification result of its application
Human errors by maintenance workers in U.S. nuclear power plants were compared with those in Japanese nuclear power plants for the same period in order to identify the characteristics of such errors. As for U.S. events, cases which occurred during 2006 were selected from the Nuclear Information Database of the Institute to Nuclear Safety System while Japanese cases that occurred during the same period, were extracted from the Nuclear Information Archives (NUCIA) owned by JANTI. The most common cause of human errors was insufficient knowledge or experience' accounting for about 40% for U.S. cases and 50% or more of cases in Japan. To break down 'insufficient knowledge', we classified the contents of knowledge into five categories; method', 'nature', 'reason', 'scope' and 'goal', and classified the level of knowledge into four categories: 'known', 'comprehended', 'applied' and analytic'. By using this classification, the patterns of combination of each item of the content and the level of knowledge were compared. In the U.S. cases, errors due to 'insufficient knowledge of nature and insufficient knowledge of method' were prevalent while three other items', 'reason', scope' and 'goal' which involve work conditions among the contents of knowledge rarely occurred. In Japan, errors arising from 'nature not being comprehended' were rather prevalent while other cases were distributed evenly for all categories including the work conditions. For addressing insufficient knowledge or experience', we consider that the following approaches are valid: according to the knowledge level which is required for the work, the reflection of knowledge on the procedure or education materials, training and confirmation of understanding level, virtual practice and instruction of experience should be implemented. As for the knowledge on the work conditions, it is necessary to enter the work conditions in the procedure and education materials while conducting training or education. (author)
van Berkum, Eric C.; ter Huerne, Henderikus L.; Jacob, B.; Kovarik, J.; Motyka, V.
One of the consequences of the increased utilization of road infrastructure is more frequent maintenance work. Since generally road works result in less available road capacity, we can witness an increase in traffic hindrance, which involves delays and externalities as noise, air quality, safety and
De Beer, Morris
Full Text Available Tyre or road interface stresses are those induced by vehicular traffic running on roads, and are the primary cause of surfacing problems. The cost of asphalt layers is often the most significant in road construction and maintenance work...
... Transportation Facility Maintenance Program A Appendix A to Subpart G Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance Pt. 170... Transportation Facility Maintenance Program The following activities are eligible for BIA Transportation Facility...
... Transportation Facilities Maintenance Management System? 170.807 Section 170.807 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance § 170.807 What must BIA include when it develops an IRR Transportation Facilities Maintenance Management System...
Maintenance Mentor (MXM) is a research effort conducted by a joint AFRL/HESR and Northrop Grumman Information Technology team to identify the basic, high-level requirements necessary for improving flight line diagnostic capabilities...
Caldwell, B.; Duncan, P.; Myers, J.
The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D ampersand D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D ampersand D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D ampersand D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project will result in the development of an Advanced Worker Protection System (AWPS). The AWPS will be built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with advanced protective garments, advanced liquid cooling garment, respirator, communications, and support equipment to provide improved worker protection, simplified system maintenance, and dramatically improve worker productivity through longer duration work cycles. Phase I of the project has resulted in a full scale prototype Advanced Worker Protection Ensemble (AWPE, everything the worker will wear), with sub-scale support equipment, suitable for integrated testing and preliminary evaluation. Phase II will culminate in a full scale, certified, pre-production AWPS and a site demonstration
Caldwell, B.; Duncan, P.; Myers, J.
The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D&D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D&D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D&D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project will result in the development of an Advanced Worker Protection System (AWPS). The AWPS will be built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with advanced protective garments, advanced liquid cooling garment, respirator, communications, and support equipment to provide improved worker protection, simplified system maintenance, and dramatically improve worker productivity through longer duration work cycles. Phase I of the project has resulted in a full scale prototype Advanced Worker Protection Ensemble (AWPE, everything the worker will wear), with sub-scale support equipment, suitable for integrated testing and preliminary evaluation. Phase II will culminate in a full scale, certified, pre-production AWPS and a site demonstration.
It is essential to any research activity that accurate and efficient measurements be made for the experimental parameters under consideration for each individual experiment or test. Satisfactory measurements in turn depend upon having the necessary instruments and the capability of ensuring that they are performing within their intended specifications. This latter requirement can only be achieved by providing an adequate maintenance facility, staffed with personnel competent to understand the problems associated with instrument adjustment and repair. The Instrument Repair Shop at the Lawrence Berkeley Laboratory is designed to achieve this end. The organization, staffing and operation of this system is discussed. Maintenance policy should be based on studies of (1) preventive vs. catastrophic maintenance, (2) records indicating when equipment should be replaced rather than repaired and (3) priorities established to indicate the order in which equipment should be repaired. Upon establishing a workable maintenance policy, the staff should be instructed so that they may provide appropriate scheduled preventive maintenance, calibration and corrective procedures, and emergency repairs. The education, training and experience of the maintenance staff is discussed along with the organization for an efficient operation. The layout of the various repair shops is described in the light of laboratory space and financial constraints
G. Budai-Balke (Gabriella)
textabstractIn the last decades, maintenance of technical systems has become increasingly impor- tant in many industries. Such systems are transport systems (rail, bus, airplane), civil engineering systems (roads, buildings, bridges), health care (hospitals), communication systems, manufacturing
The concept of preventive maintenance is very important in the effective management and deployment of : vehicle fleets. The Texas Department of Transportation (TxDOT) operates a large fleet of on-road and offroad : equipment. Newer engines and vehicl...
Evaluates the experience of worker entrepreneurship, highlighting successes and failures in Europe, and analyzes the relative importance of factors to worker entrepreneurship such as access to finance, education and training, organizational culture, and worker risk taking. (JOW)
Dijkstra, Michiel B.; van Zweden, Jelle Stijn; Dirchsen, Maria
Nonreproductive workers of many eusocial Hymenoptera 'police' the colony, that is, they attack reproductive sister workers or destroy their eggs (unfertilized; developing into haploid males). Several ultimate causes of policing have been proposed, including (1) an increase in colony productivity,...... reproductive workers. We infer that relatedness incentives are the most likely ultimate cause of the evolutionary maintenance of worker-egg policing in A. echinatior. (C) 2010 The Association for the Study of Animal Behaviour. Published by Elsevier Ltd. All rights reserved...
Freund, Alice; Zuckerman, Norman; Baum, Lisa; Milek, Debra
This study identified activities and sources that contribute to ultrafine and other submicron particle exposure that could trigger respiratory symptoms in highway repair workers. Submicron particle monitoring was conducted for paving, milling, and pothole repair operations in a major metropolitan area where several highway repair workers were identified as symptomatic for respiratory illness following exposures at the 2001 World Trade Center disaster site. Exposure assessments were conducted for eight trades involved in road construction using a TSI P-Trak portable condensation particle counter. Direct readings near the workers' breathing zones and observations of activities and potential sources were logged on 7 days on 27 workers using four different models of pavers and two types of millers. Average worker exposure levels ranged from 2 to 3 times background during paving and from 1 to 4 times background during milling. During asphalt paving, average personal exposures to submicron particulates were 25,000-60,000, 28,000-70,000, and 23,000-37,000 particles/ cm(3) for paver operators, screed operators, and rakers, respectively. Average personal exposures during milling were 19,000-111,000, 28,000-81,000, and 19,000 particles/cm(3) for the large miller operators, miller screed operators, and raker, respectively. Personal peak exposures were measured up to 467,000 and 455,000 particles/cm(3) in paving and milling, respectively. Several sources of submicron particles were identified. These included the diesel and electric fired screed heaters; engine exhaust from diesel powered construction vehicles passing by or idling; raking, dumping, and paving of asphalt; exhaust from the hotbox heater; pavement dust or fumes from milling operations, especially when the large miller started and stopped; and secondhand cigarette smoke. To reduce the potential for health effects in workers, over 40 recommendations were made to control exposures, including improved maintenance of
A road safety audit (RSA) and a road safety inspection (RSI) are used to test the safety level of the road infrastructure. The RSA tests the design of new roads or the reconstruction of existing roads, whereas the RSI is used for testing existing roads. An RSA, therefore, aims to 'improve' the road
Mao, Ruichang; Duan, Huabo; Dong, Dan
assessment method. For given years (ranged from 2004 to 2013), various activities of urban roads (e.g. newly planned road construction, maintenance of road in use, and road renovation and demolition) have been examined in this study. The results show that the total carbon footprint from urban roads...... in Shenzhen was 260 (±20) thousand tons CO2e in 2013. The major contributor was the materials use (embodied impact) from newly constructed roads, which accounts for 52.3% of the total carbon footprint, followed by the maintenance stage (24.3%). The eco-design process of road construction plays a vital role...... studies attempted to examine the impacts from transport infrastructure, especially at a city or country level. This paper, taking Shenzhen in China (a fast developing megacity) as the case study, is specially designed to quantify the carbon footprint of the urban roads by using streamlined life cycle...
Yoshino, Kenji; Hirotsu, Yuko; Fujimoto, Junzo; Tsumura, Joji
This research establishes the new maintenance educational support prototype system for aiming at organization as Trinity (a supervision person, a construction person in charge, a work person in charge, and group length), and improvement in human reliability for the purpose of aiming at before hand prevention of a systematic error, human error, and the accident and a trouble. (1) This maintenance educational support: system made educational start to the educational end the structure navigated exactly, carrying out the exchange with a data base along with the road map which divided action (act) of the work process and worker concerning RHR pump maintenance work for a participant etc. by class. (2) First, according to a participant's attribute, this educational support system performs educational support (a question and reply) concerning an organization and organization, and judges knowledge and a nature type based on the result. Furthermore, educational support (a question and reply) concerning maintenance work is performed, and a knowledge level is judged based on the result. And it considered as the structure which performs the comprehensive judgment about an organization, organization, and the educational effect concerning maintenance work at the last. (3) The judgment pattern of the knowledge and nature after the educational support end concerning a participant's organization and organization was made into four kinds which consist of (1) organization priority and duty A type, (2) organization priority and an adaptable type, (3) individual priority and an adaptable type, and (4) individual priority and a duty priority type. (4) The judgment pattern of the knowledge level after the educational support end concerning maintenance work of a participant was used as three kinds of evaluation axes, schedule management, apparatus reliability capability, and human-being reliability. (author)
... 49 Transportation 4 2010-10-01 2010-10-01 false Roadway maintenance machines. 214.341 Section 214... Roadway maintenance machines. (a) Each employer shall include in its on-track safety program specific provisions for the safety of roadway workers who operate or work near roadway maintenance machines. Those...
Ismail, Muhd Shahril Nizam; Ghani, Abdul Naser Abdul
Flooding occurs frequently in many countries including Malaysia. Floods in Malaysia are usually due to heavy and prolonged rainfall, uncontrolled development, and drainage systems that are not being monitored. Road damage due to flooding event can cause huge expenditures for the post-flooding rehabilitation and maintenance. The required maintenance and rehabilitation could upset the original life cycle cost estimations. Data on road statistics were obtained from the Highway Planning Division, Ministry of Works Malaysia and data on flooding was collected from the Department of Irrigation and Drainage Malaysia for events between 2012 and 2015. The pilot sites were selected based on its historical cases of floods that caused road damages in Kedah. The pilot site indicated that the impact of flooding on road infrastructures systems can be used to plan better road design and maintenances. It also revealed that it costs more than RM 1 million to reinstate roads damaged by flooding in a typical district annually.
Thompson, R.J.; Visser, A.T. [University of Pretoria, Pretoria (South Africa). Dept. of Mining Engineering
The world-wide expansion of surface mining has led to the development of very large off-highway trucks currently capable of hauling layloads in excess of 160 t. Typical axle loads ranging from 110 t to 170 t are applied to haul roads that have been, at best, empirically designed on the premise of `satisfactory` or `failed`, both in terms of structure and function of the road. The use of these empirical pavement design techniques will prove inadequate when high axle loads are encountered. Not only will the maintenance costs of existing haul roads of inadequate thickness increase, but vehicle operating and maintenance costs will also increase prohibitively. Under these conditions there is thus a clearly defined need for improved construction and management techniques for flexible mine haulage roads, appropriate for the wheel loads of vehicles now in use. The aim of this paper is to introduce developments in haul road structural, functional and maintenance design and management which overcome the limitations associated with the previously empirical design techniques and to show how these developments are combined into an integrated design strategy combining construction techniques, available material and road maintenance equipment with hauler choice to realise a reduction in haulage and road maintenance costs. Future contributions will enumerate on the fundamental haul road structural, functional and maintenance design and management research from which these developments originated. 7 refs., 5 figs., 2 tabs.
U.S. Environmental Protection Agency — Roads are a source of auto related pollutants (e.g. gasoline, oil and other engine fluids). When roads are near streams, rain can wash these pollutants directly into...
U.S. Environmental Protection Agency — Roads are a source of auto related pollutants (e.g. gasoline, oil and other engine fluids). When roads are near streams, rain can wash these pollutants directly into...
U.S. Environmental Protection Agency — Road density is generally highly correlated with amount of developed land cover. High road densities usually indicate high levels of ecological disturbance. More...
Vermont Center for Geographic Information — (Link to Metadata)(User Guide)(Symbology layer files: aotclass_only.lyr aotclass_surfacetyp.lyr)The Vermont Road Centerline data layer (TransRoad_RDS) contains all...
Full Text Available Development of the road network, increasing motorization of the population significantly increase the risk of accidents. Experts in the field of traffic are developing methods to reduce the probability of accidents. The ways of solving the problems of road safety audit at various stages of the «life» of roads are considered.
Maintenance optimization problem could not always settled mathematically and was obliged to use quasi-optimum solution with omitting non-formulated limiting condition or neglecting part of optimization object. In such a case knowledge engineering thinking was encouraged. Maintenance of complicated plant and artificial system should be considered from artificial object (equipment/facility hardware and system), technical information and knowledge base, and organizational and human aspect or society and institution. Comprehensive management system in organization and society was necessary not only for assuring integrity of equipment but also for attaining higher performance, reliability and economics of system. For better judgment it was important to share mechanism to make use of more information with organization or whole society. It was required to create database and data mining for knowledge base management system of maintenance. Maintenance was called 'last fortress' to assure quality such as reliability and safety of required function of equipment. Strategic approach to develop maintenance technology under cooperation was considered. Life extension R and D road map was launched in 2005. (T. Tanaka)
Soilán, M.; Riveiro, B.; Martínez-Sánchez, J.; Arias, P.
The periodic inspection of certain infrastructure features plays a key role for road network safety and preservation, and for developing optimal maintenance planning that minimize the life-cycle cost of the inspected features. Mobile Mapping Systems (MMS) use laser scanner technology in order to collect dense and precise three-dimensional point clouds that gather both geometric and radiometric information of the road network. Furthermore, time-stamped RGB imagery that is synchronized with the MMS trajectory is also available. In this paper a methodology for the automatic detection and classification of road signs from point cloud and imagery data provided by a LYNX Mobile Mapper System is presented. First, road signs are detected in the point cloud. Subsequently, the inventory is enriched with geometrical and contextual data such as orientation or distance to the trajectory. Finally, semantic content is given to the detected road signs. As point cloud resolution is insufficient, RGB imagery is used projecting the 3D points in the corresponding images and analysing the RGB data within the bounding box defined by the projected points. The methodology was tested in urban and road environments in Spain, obtaining global recall results greater than 95%, and F-score greater than 90%. In this way, inventory data is obtained in a fast, reliable manner, and it can be applied to improve the maintenance planning of the road network, or to feed a Spatial Information System (SIS), thus, road sign information can be available to be used in a Smart City context.
van den Ancker, Hanneke; Jungerius, Pieter Dirk
A large part of the countryside roads on the Pleistocene sands of The Netherlands are dirt roads. Most are footpaths, but a small percentage are relatively heavily used by motorized vehicles. These latter roads are a cause subject of debate. Puddles and potholes develop during periods of wet weather, while dust whirls from the roads form during spells of dry weather as do washboard ripples. They cause problems for people living along these roads and tourists (walkers and bikers. The community of Ede (NL), like many other communities on the sand, wants to keep its 80 km of dirt roads because of the natural values they harbour as well as for their characteristic landscape quality and cultural heritage value. A part of the dirt roads in Ede is heavily used. In 2009, the community of Ede developed a decision model to support management of the dirt roads. Ede acknowledges that each dirt road is unique and asks for a tailor-made solution. Road maintenance measures include grading, making a camber, digging pits, applying loam or sandy loam. If problems become too large, one-way traffic can be an option. In more and more cases the dirt roads are barred for motorized through traffic (Gemeente Ede, 2009). As a reconnaissance we have studied the dirt roads of the Horabos/Horalaan over the last year. Incidentally we looked at other parts of the main Horalaan and the footpaths in the adjacent forest of Hoekelum. All dirt roads lie near the top of a Saalian push-moraine in which the upper course of dry valleys are present. Some results of the reconnaissance: - Most dirt roads sections in the Horabos lie lower than the surrounding terrain; - The problems develop in a short period of time during special weather conditions; - Certain dirt road sections e.g. those sections crossing a slight depression are quickly developing potholes; - Even a small slope of the road (differences that have consequences for its maintenance. Knowledge of geodiversity of the terrain and study of small
Thomas , Edouard; Levrat , Eric; Iung , Benoît; Cocheteux , Pierre
International audience; Conventional maintenance strategies on a single component are being phased out in favour of more predictive maintenance actions. These new kinds of actions are performed in order to control the global performances of the whole industrial system. They are anticipative in nature, which allows a maintenance expert to consider non-already-planned maintenance actions. Two questions naturally emerge: when to perform a predictive maintenance action; how a maintenance expert c...
Gristina, S.; Ellul, C.; Scianna, A.
Road transport has always played an important role in a country's growth and, in order to manage road networks and ensure a high standard of road performance (e.g. durability, efficiency and safety), both public and private road inventories have been implemented using databases and Geographical Information Systems. They enable registering and managing significant amounts of different road information, but to date do not focus on 3D road information, data integration and interoperability. In an increasingly complex 3D urban environment, and in the age of smart cities, however, applications including intelligent transport systems, mobility and traffic management, road maintenance and safety require digital data infrastructures to manage road data: thus new inventories based on integrated 3D road models (queryable, updateable and shareable on line) are required. This paper outlines the first step towards the implementation of 3D GIS-based road inventories. Focusing on the case study of the "Road Cadastre" (the Italian road inventory as established by law), it investigates current limitations and required improvements, and also compares the required data structure imposed by cadastral legislation with real road users' needs. The study aims to: a) determine whether 3D GIS would improve road cadastre (for better management of data through the complete life-cycle infrastructure projects); b) define a conceptual model for a 3D road cadastre for Italy (whose general principles may be extended also to other countries).
Brouwer, M. Poppe, F. Blokpoel, A. & Kars, V.
This report is the result of a feasibility study, financially supported by the European Commission. The study investigated the possibilities for the development and maintenance of a European Road Safety Information System with relevant and internationally comparable information. Recommendations on
The basic principles of haul-road design are well-known by most mine operators. Build a road with the proper surface, crown, width, and grade, and production will likely benefit while operating costs may come down. Likewise, the elements of tire maintenance are familiar throughout the industry. Choose the right compound for the application, keep the haul roads in good shape, maintain proper tire inflation, and you can reasonably expect truck tires to wear evenly and predictably throughout their useful lives. What is not so apparent is the interplay between these two important areas of mine operation and the benefits that can accrue from increased attention to their needs. This interaction and its effects on cost and service life are discussed. 5 figs.
A site-wide network maintenance operation has been scheduled for Saturday 28 February. Most of the network devices of the general purpose network will be upgraded to a newer software version, in order to improve our network monitoring capabilities. This will result in a series of short (2-5 minutes) random interruptions everywhere on the CERN sites throughout the day. This upgrade will not affect the Computer Centre itself, Building 613, the Technical Network and the LHC experiments, dedicated networks at the pits. For further details of this intervention, please contact Netops by phone 74927 or e-mail mailto:Netops@cern.ch. IT/CS Group
A site wide network maintenance has been scheduled for Saturday 28 February. Most of the network devices of the General Purpose network will be upgraded to a newer software version, in order to improve our network monitoring capabilities. This will result in a series of short (2-5 minutes) random interruptions everywhere on the CERN sites along this day. This upgrade will not affect: the Computer centre itself, building 613, the Technical Network and the LHC experiments dedicated networks at the pits. Should you need more details on this intervention, please contact Netops by phone 74927 or email mailto:Netops@cern.ch. IT/CS Group
Mlynarek, S; Corn, M; Blake, C
The exposures of building maintenance personnel and occupants to airborne asbestos fibers, and the effects of operations and maintenance programs on those exposures, continue to be an important public health issue. The subject of this investigation was a large metropolitan county with numerous public buildings which routinely conducted air sampling for asbestos. A total of 302 personal air samples in nine task categories collected during maintenance worker activities in proximity to asbestos-containing materials were analyzed; 102 environmental air samples in four task categories were also analyzed. The arithmetic means of the 8-hr time weighted average exposures for personal sampling for each task category were all below the Occupational Safety and Health Administration permissible exposure level of 0.1 fibers (f)/cc > 5 microm. The highest mean 8-hr time weighted average exposure was 0.030 f/cc > 5 microm for ceiling tile replacement. The maximum asbestos concentration during sample collection for environmental samples was 0.027 f/cc > 5 microm. All asbestos-related maintenance work was done within the framework of an Operations and Maintenance Program (OMP) which utilized both personal protective equipment and controls against fiber release/dispersion. Results are presented in association with specific OMP procedures or controls. These results support the effectiveness of using Operations and Maintenance Programs to manage asbestos in buildings without incurring unacceptable risk to maintenance workers performing maintenance tasks.
upon a massive road-building programme throughout the colony. The rapid expansion ..... transportation problems of his textile customers and palm produce producers and ... unflinching loyalty and solidarity with their illustrious son, General.
Marjon, P. L.
Maintenance and repair of spacecraft are discussed from the hardware viewpoint. Interior operations are rather straight forward, but study results show that space suits are not sufficient for exterior repair work. Evaluation of worker requirements leads to a maintenance capsule concept. Capsule application is depicted in contrasting situations: repair of meteoroid damage and nuclear engine replacement. Radiation shielding is also considered. (D.C.W.)
Full Text Available Road centerline extraction from imagery constitutes a key element in numerous geospatial applications, which has been addressed through a variety of approaches. However, most of the existing methods are not capable of dealing with challenges such as different road shapes, complex scenes, and variable resolutions. This paper presents a novel method for road centerline extraction from imagery in a fully automatic approach that addresses the aforementioned challenges by exploiting road GPS data. The proposed method combines road color feature with road GPS data to detect road centerline seed points. After global alignment of road GPS data, a novel road centerline extraction algorithm is developed to extract each individual road centerline in local regions. Through road connection, road centerline network is generated as the final output. Extensive experiments demonstrate that our proposed method can rapidly and accurately extract road centerline from remotely sensed imagery.
Rising operating costs has caused maintenance professionals to rethink their strategy for preventive maintenance (PM) programs. Maintenance Templates are pre-engineered PM task recommendations for a component type based on application of the component. Development of the maintenance template considers the dominant failure cause of the component and the type of preventive maintenance that can predict or prevent the failure from occurring. Maintenance template development also attempts to replace fixed frequency tasks with condition monitoring tasks such as vibration analysis or thermography. For those components that have fixed frequency PM intervals, consideration is given to the maintenance drivers such as criticality, environment and usage. This helps to maximize the PM frequency intervals and maximize the component availability. Maintenance Templates have been used at PECO Energy's Limerick Generating Station during the Reliability Centered Maintenance (RCM) Process to optimize their PM program. This paper describes the development and uses of the maintenance templates
H. Hulusi Acar
Full Text Available Nowadays, needs for forest and raw wood materials has been increasing with the economic developments of the societies. But, the forest areas have been decreasing because of the pressures of the societies on forest especially in developing countries. In such regions, forest areas were on high mountainous areas. This situation is the same in Turkey, especially east Black Sea region. In Turkey, forest roads are still B forms of secondary roads. The wide of these roads are minimum 4 meters, generally minimum curve radius of them are 10 meters, and some times less then that. These roads do not have pavement and maintenance works were not made there too. And these roads are not suitable for transportation with truck-trailer. The transhipment problems form a typical example of the linear programming method. When this method applied, as well as solving transportation problems, distribution problems are solved related to transhipment.
Full Text Available Economic activities in South Africa during the past decade have caused, inter alia, road traffic congestion to accelerate annually and road infrastructure to deteriorate rapidly. Motor vehicle sales, correlated with economic trends and the economic empowerment of citizens, have and still are increasing at a faster rate than the supply of necessary infrastructure. As such, congestion, especially in the Gauteng area, has reached unacceptable levels during peak hours, necessitating the upgrading and continual maintenance of these roads and other national roads. The financial burden of upgrading and maintaining road infrastructure is enormous and, although the South African government makes contributions, an income from the road infrastructure is necessary to sustain quality infrastructure. However, a road-user paying approach, especially the structure thereof, should be acceptable to society in terms of economic efficiency and various means of equity. This article reviews the relevance of a road-user paying approach as applied in South Africa.
Full Text Available This paper analyzes the environmental regulatory reforms of the Republic of Moldova to restore roads and problems over time. Goals and objectives are the analysis of the current situation on road rehabilitation and environmental assessments in this area, as well as issues that require in rehabilitation and maintenance of roads in the Republic of Moldova.Are described briefly: general aspects of road rehabilitation issues; legislation and environmental regulations in the road; differences between Moldova and procedures of the World Bank's environmental assessment in the construction and rehabilitation of roads; problem of national legislative and normative acts harmonization to international requirements.The paper discusses specific environmental to appear on completion of the rehabilitation of roads in the Republic of Moldova. In the final part of the paper presents the conclusions and some suggestions on how to facilitate the rehabilitation of roads in accordance with Agenda 21 of the country and European and international requirements.
Di Napoli, Claudia; Piazza, Andrea; Antonacci, Gianluca; Todeschini, Ilaria; Apolloni, Roberto; Pretto, Ilaria
Road ice is a dangerous meteorological hazard to a nation's transportation system and economy. By reducing the pavement friction with vehicle tyres, ice formation on pavements increases accident risk and delays travelling times thus posing a serious threat to road users' safety and the running of economic activities. Keeping roads clear and open is therefore essential, especially in mountainous areas where ice is likely to form during the winter period. Winter road maintenance helps to restore road efficiency and security, and its benefits are up to 8 times the costs sustained for anti-icing strategies . However, the optimization of maintenance costs and the reduction of the environmental damage from over-salting demand further improvements. These can be achieved by reliable road weather forecasts, and in particular by the prediction of road surface temperatures (RSTs). RST is one of the most important parameters in determining road surface conditions. It is well known from literature that ice forms on pavements in high-humidity conditions when RSTs are below 0°C. We have therefore implemented an automatic forecast system to predict critical RSTs on a test route along the Adige Valley complex terrain, in the Italian Alps. The system considers two physical models, each computing heat and energy fluxes between the road and the atmosphere. One is Reuter's radiative cooling model, which predicts RSTs at sunrise as a function of surface temperatures at sunset and the time passed since then . One is METRo (Model of the Environment and Temperature of Roads), a road weather forecast software which also considers heat conduction through road material . We have applied the forecast system to a network of road weather stations (road weather information system, RWIS) installed on the test route . Road and atmospheric observations from RWIS have been used as initial conditions for both METRo and Reuter's model. In METRo observations have also been coupled to
Steven I-Jy Chien
Full Text Available Extreme weather conditions(i.e. snow storm in winter time have caused significant travel disruptions and increased delay and traffic accidents. Snow plowing and salt spreading are the most common counter-measures for making our roads safer for motorists. To assist highway maintenance authorities with better planning and allocation of winter maintenance resources, this study introduces an analytical model to estimate the required number of trucks for spreading operation subjective to pre-specified service time constraints considering road geometry, weather and traffic. The complexity of the research problem lies in dealing with heterogeneous road geometry of road sections, truck capacities, spreading patterns, and traffic speeds under different weather conditions and time periods of an event. The proposed model is applied to two maintenance yards with seven road sections in New Jersey (USA, which demonstrates itself fairly practical to be implemented, considering diverse operational conditions.
Carelli, M.D.; Paramonov, D.V.; Petrovic, B.
The DOE Generation IV road-map process is in its second and final year. Almost one hundred concepts submitted from all over the world have been reviewed against the Generation IV goals of resources sustainability; safety and reliability; and, economics. Advanced LWRs are taken as the reference point. IRIS (International Reactor Innovative and Secure), a 100-335 MWe integral light water reactor being developed by a vast international consortium led by Westinghouse, is one on the concepts being considered in the road-map and is perhaps the most visible representative of the concept set known as Integral Primary System Reactors (IPSR). This paper presents how IRIS satisfies the prescribed goals. The first goal of resource sustainability includes criteria like utilization of fuel resources, amount and toxicity of waste produced, environmental impact, proliferation and sabotage resistance. As a thermal reactor IRIS does not have the same fuel utilization as fast reactors. However, it has a significant flexibility in fuel cycles as it is designed to utilize either UO 2 or MOX with straight burn cycles of 4 to 10 years, depending on the fissile content. High discharge burnup and Pu recycling result in good fuel utilization and lower waste; IRIS has also attractive proliferation resistance characteristics, due to the reduced accessibility of the fuel. The safety and reliability goal include reliability, workers' exposure, robust safety features, models with well characterized uncertainty, source term and mechanisms of energy release, robust mitigation of accidents. IRIS is significantly better than advanced LWRs because of its safety by design which eliminates a variety of accidents such as LOCAs, its containment vessel coupled design which maintains the core safely covered during the accident sequences, its design simplification features such as no (or reduced) soluble boron, internal shielding and four-year refueling/maintenance interval which significantly reduce
Full Text Available have required intermittent maintenance during their lives, they have clearly shown that current materials standards may be too conservative for affordable low volume roads. The study has shown that good drainage and construction quality are the primary...
Amir Ali Bakhshi
Full Text Available Railroad maintenance engineering plays an important role on availability of roads and reducing the cost of railroad incidents. Rail is of the most important parts of railroad industry, which needs regular maintenance since it covers a significant part of total maintenance cost. Any attempt on optimizing total cost of maintenance could substantially reduce the cost of railroad system and it can reduce total cost of the industry. The paper presents a new method to estimate the cost of rail failure using different cost components such as cost of inspection and cost of risk associated with possible accidents. The proposed model of this paper is used for a real-world case study of railroad transportation of Tehran region and the results have been analyzed.
Full Text Available The recent preparation of the Operation and Maintenance (O&M Manual for Palestinian municipalities is an important step to guide them towards preparing and implementing their O&M priority-based plans, considering scare resources. During the course of preparation of the Manual, the proposed procedures were applied at ten pilot municipalities. This study aims to explore the outcome of the implementation of the 2014 O&M road maintenance plans at these municipalities. To achieve this, analysis of the outcome of a questionnaire designed to collect relevant information from these municipalities was conducted. The results show that seven of the targeted municipalities used the prioritization criteria proposed in the O&M Manual. Despite that the remaining municipalities had the liberty to slightly change the relative weight of the indicators, sensitivity analysis was conducted and indicated robustness of the indicators. The average percentage of roads’ lengths of the actually maintained to the planned was 35%, suggesting that the plans were ambitious and need to be more rational. Most of the allocated funds for road maintenance came from the municipalities own budgets, indicating need to have more financing by the government to ensure the integrity of the municipal road infrastructure assets. The results also indicated that 95% of the maintenance works were executed through external contracts, and that the municipalities need to be supported and equipped to conduct the basic road maintenance works. Keywords: Road maintenance plans, Maintenance prioritization, Municipal roads’ maintenance, Maintenance plans evaluation, Palestine
Full Text Available This paper discuses the extent to which employment-intensive rural infrastructure maintenance projects can be used as a tool to empower women to achieve sustainable rural livelihoods using Siyatentela rural road maintenance program in Mpumalanga...
Full Text Available Road distresses, such as potholes and edge cracks, are not only a source of frustration to drivers but also negatively impact the economy due to damage to motor vehicles and costly road repairs. Regular and rapid pavement inspection and maintenance...
What is Vision Hampton Roads? : Vision Hampton Roads is... : A regionwide economic development strategy based on the collective strengths of all : localities of Hampton Roads, created with the input of business, academia, nonprofits, : government,...
Road crashes result in all kinds of social costs, such as medical costs, production loss, human losses, property damage, settlement costs and costs due to congestion. Studies into road crash costs and their trends are carried out quite regularly. In 2009, the costs amounted to € 12.5 billion, or
Conde, Dalia Amor
Road-building projects in the Mayan Biosphere Reserve to connect Mexico and Guatemala were subjected to a cost-benefit evaluation. Up to an estimated 311,000 hectares of jaguar habitat were found to be at risk of deforestation due to these projects. Some of the projects were shown to have negativ...... of continued conservation rather than road development....
A classic Road Diet converts an existing four-lane undivided roadway segment to a three-lane segment consisting of two : through lanes and a center two-way left turn lane (TWLTL). A Road Diet improves safety by including a protected left-turn lane : ...
BROOKHUIS, K; BROWN, [No Value
Modifications to the design of vehicles and road infrastructures have improved road safety significantly over the past decades, but all such developments depend upon user acceptance and institutional backing for their success. New R&D programmes combining ergonomic and engineering approaches are
Eenink, R.G. Dijkstra, A. Wijnen, W. & Janssen, S.T.M.C.
The Nouwen Committee (National Platform Paying Differently for Mobility) advised the Cabinet in 2005 about the introduction of a system of road pricing. Part of this advice consisted of a calculation of the expected road safety effects of such a system. In a letter to the Minister of Transport, SWOV
vehicles enable more renewable electricity to be integrated onto the electricity grid. This is particularly evident in 2050, since the price of fossil fuels increases while the price of renewable electricity and batteries decreases. Finally, the electric road scenarios can facilitate more reductions......This study compares electric roads with oil (petrol and diesel) and battery electric vehicles, using Denmark as a case study. Electric roads can reduce the cost of electric vehicles by supplying them with electricity directly from the road rather than via a battery for long-distance journeys....... In this paper, an electric road scenario is compared to both an oil and battery electric vehicle scenario using the 2010 Danish energy system, but for two sets of costs: one set based on historical costs from the year 2010 and one based on projected costs for the year 2050. The results indicate that electric...
Manson, T.; Blok, M.
A general review of the measures involved in restoring abandoned access road sites in British Columbia was presented. Permits and licences are needed for the use of crown land for roads used by the petroleum and natural gas industry for exploration activities. However, the regulatory framework for road site reclamation is not well developed. The nature of access road reclamation is very site-specific. Some of the issues that are considered for all reclamation projects include slope stability, water control, revegetation, soil rehabilitation, access management and monitoring. The primary objective of reclaiming access road sites is to return the site to conditions that are equal or better than pre-disturbance conditions. Restoration measures must be approved by BC Environment and by the Department of Fisheries and Oceans where federal fisheries responsibilities are involved. 54 refs., 5 tabs., 3 figs
Camden, Matthew C; Medina-Flintsch, Alejandra; Hickman, Jeffrey S; Bryce, James; Flintsch, Gerardo; Hanowski, Richard J
Similar to commercial motor vehicle drivers, winter maintenance operators are likely to be at an increased risk of becoming fatigued while driving due to long, inconsistent shifts, environmental stressors, and limited opportunities for sleep. Despite this risk, there is little research concerning the prevalence of winter maintenance operator fatigue during winter emergencies. The purpose of this research was to investigate the prevalence, sources, and countermeasures of fatigue in winter maintenance operations. Questionnaires from 1043 winter maintenance operators and 453 managers were received from 29 Clear Road member states. Results confirmed that fatigue was prevalent in winter maintenance operations. Over 70% of the operators and managers believed that fatigue has a moderate to significant impact on winter maintenance operations. Approximately 75% of winter maintenance operators reported to at least sometimes drive while fatigued, and 96% of managers believed their winter maintenance operators drove while fatigued at least some of the time. Furthermore, winter maintenance operators and managers identified fatigue countermeasures and sources of fatigue related to winter maintenance equipment. However, the countermeasures believed to be the most effective at reducing fatigue during winter emergencies (i.e., naps) were underutilized. For example, winter maintenance operators reported to never use naps to eliminate fatigue. These results indicated winter maintenance operations are impacted by operator fatigue. These results support the increased need for research and effective countermeasures targeting winter maintenance operator fatigue. Copyright © 2018 Elsevier Ltd. All rights reserved.
Machado, Jessica S.; Gerulis, Eduardo; Todo, Alberto S.; Rodrigues Junior, Orlando
This paper performs a study of maintenance tasks realized in production cells to suggest improvements related to the occupational doses based on the optimization principle of the radioprotection. A data survey has been realized of the doses received by the workers during the maintenance. The average values of effective doses are lower than the limits established in the regulations, however can be optimized
"Job security" is an oxymoron in today's environment of downsizing, mergers, and acquisitions. Workers find themselves living by new rules in the workplace that they may not understand. How do we cope? It is the leader's charge to take advantage of this chaos and create conditions under which his or her people can understand the need for change and come together with a shared purpose to effect that change. The clinical laboratory at Arkansas Children's Hospital has taken advantage of this chaos to down-size and to redesign how the work gets done to pave the road to maximum productivity. After initial hourly cutbacks, the workers accepted the cold, hard fact that they would never get their old world back. They set goals to proactively shape their new world through reorganizing, flexing staff with workload, creating a rapid response laboratory, exploiting information technology, and outsourcing. Today the laboratory is a lean, productive machine that accepts change as a way of life. We have learned to adapt, trust, and support each other as we have journeyed together over the rough roads. We are looking forward to paving a new fork in the road to the future.
Full Text Available Roughness is a dynamic property of the gravel road surface that affects safety, ride comfort as well as vehicle tyre life and maintenance costs. A rapid survey of gravel road condition is fundamental for an effective maintenance planning and definition of the intervention priorities.Different non-contact techniques such as laser scanning, ultrasonic sensors and photogrammetry have recently been proposed to reconstruct three-dimensional topography of road surface and allow extraction of roughness metrics. The application of Microsoft Kinect™ depth camera is proposed and discussed here for collection of 3D data sets from gravel roads, to be implemented in order to allow quantification of surface roughness.The objectives are to: i verify the applicability of the Kinect sensor for characterization of different forest roads, ii identify the appropriateness and potential of different roughness parameters and iii analyse the correlation with vibrations recoded by 3-axis accelerometers installed on different vehicles. The test took advantage of the implementation of the Kinect depth camera for surface roughness determination of 4 different forest gravel roads and one well-maintained asphalt road as reference. Different vehicles (mountain bike, off-road motorcycle, ATV vehicle, 4WD car and compact crossover were included in the experiment in order to verify the vibration intensity when travelling on different road surface conditions. Correlations between the extracted roughness parameters and vibration levels of the tested vehicles were then verified. Coefficients of determination of between 0.76 and 0.97 were detected between average surface roughness and standard deviation of relative accelerations, with higher values in the case of lighter vehicles.
Discusses maintenance business plans, statements which provide accountability for facilities maintenance organizations' considerable budgets. Discusses the plan's components: statement of plan objectives, macro and detailed description of the facility assets, maintenance function descriptions, description of key performance indicators, milestone…
Sternloff, Robert E.
Current trends in park maintenance are overviewed, including maintenance impact statements, avoidance of cost through efficient use and national resource conservation, horticultural accomplishments that influence maintenance management, and vandalism prevention. (CB)
Background: Commercial road transport workers are frequently exposed to workplace violence (WPV) - an issue of public health concern in literarily all occupations involving interactions with members of the public. The study was conducted to determine the prevalence of workplace violence among commercial drivers and ...
Sep 15, 2009 ... involves more than merely road construction techniques. The preparation and ... be overseeded in each fall with legumes, small grains, or ryegrass. (Turkish ... Human activities (smoking, carelessness, accidents, or ... important to get equipment and forestry workers quickly ..... Forest fire risk analysis. Hum.
Passenger modes in India include walking, cycling, buses, trains, intermediate public transport modes (IPT) such as three-wheeled auto rickshaws or tuk-tuks, motorised two-wheelers (2W) as well as cars. However, epidemiological studies of traffic crashes in India have been limited in their approach to account for the exposure of these road users. In 2011, for the first time, census in India reported travel distance and mode of travel for workers. A Poisson-lognormal mixture regression model is developed at the state level to explore the relationship of road deaths of all the road users with commute travel distance by different on-road modes. The model controlled for diesel consumption (proxy for freight traffic), length of national highways, proportion of population in urban areas, and built-up population density. The results show that walking, cycling and, interestingly, IPT are associated with lower risk of road deaths, while 2W, car and bus are associated with higher risk. Promotion of IPT has twofold benefits of increasing safety as well as providing a sustainable mode of transport. The mode shift scenarios show that, for similar mode shift across the states, the resulting trends in road deaths are highly dependent on the baseline mode shares. The most worrying trend is the steep growth of death burden resulting from mode shift of walking and cycling to 2W. While the paper illustrates a limited set of mode shift scenarios involving two modes at a time, the model can be applied to assess safety impacts resulting from a more complex set of scenarios. Copyright © 2018 The Author. Published by Elsevier Ltd.. All rights reserved.
Accelerating site cleanup to reduce facility risks to the workers, the public and the environment during a time of declining federal budgets represents a significant technical and economic challenge to U.S. Department of Energy (DOE) Operations Offices and their respective contractors. A significant portion of a facility's recurring annual expenses are associated with routine, long-term surveillance and maintenance (S and M) activities. However, ongoing S and M activities do nothing to reduce risks and basically spend money that could be reallocated towards facility deactivation. This paper discusses the background around DOE efforts to reduce surveillance and maintenance costs, one approach used to perform cost reviews, lessons learned from field implementation and what assistance is available to assist DOE sites in performing these evaluations
Hammond, D S; Chapman, L; Thornes, J E
A ground-penetrating radar (GPR) survey of a 32 km mixed urban and rural study route is undertaken to assess the usefulness of GPR as a tool for parameterizing road construction in a route-based road weather forecast model. It is shown that GPR can easily identify even the smallest of bridges along the route, which previous thermal mapping surveys have identified as thermal singularities with implications for winter road maintenance. Using individual GPR traces measured at each forecast point along the route, an inflexion point detection algorithm attempts to identify the depth of the uppermost subsurface layers at each forecast point for use in a road weather model instead of existing ordinal road-type classifications. This approach has the potential to allow high resolution modelling of road construction and bridge decks on a scale previously not possible within a road weather model, but initial results reveal that significant future research will be required to unlock the full potential that this technology can bring to the road weather industry. (technical design note)
In this paper it is shown how an inspection-based evaluation of a Danish road bridge may be performed using the BRIDGE1 and BRIDGE2 bridge management systems produced within the EC-supported research programme "Assessment of Performance and Optimal Strategies for Inspection and Maintenance...
Because safety is related to electrical power systems maintenance, it seems reasonable to assume there could be legal issues if maintenance is not performed. OSHA has not yet taken the stand that not performing maintenance as required by the manufacturer, NFPA 70B, or ANSI/NETA MTS-07 constitutes a willful violation. OSHA defines a willful citation as one where: "the employer knowingly commits with plain indifference to the law. The employer either knows that what he or she is doing constitutes a violation, or is aware that a hazardous condition existed and made no reasonable effort to eliminate it". However, NFPA 70E 2009 requires this maintenance, and OSHA has stated on its Web site that NFPA 70E is "a guide for meeting the requirements of the OSHA electrical regulations". In addition, federal courts have found that NFPA 70E is "standard industry practice." Once a company receives and accepts a willful citation, especially if received as the result of an accident investigation, its worker's compensation protection no longer shields it. One definition given by a trial attorney for a willful citation was that it is equal to negligent behavior. Be smart: Maintain that equipment and save yourself major problems, including unscheduled shutdowns and possible litigation.
Demirel, H.C.; de Ridder, H.A.J.; Hertogh, M.J.C.M.
Infrastructure road network is a complex system in a fast changing complicated environment and therefore subject to change. The changes refer to demands, requirements, regulations and financial possibilities as well as advanced technologies. Therefore outsourcing maintenance activities are rather
O. M. Kunene
Full Text Available Over the past years road traffic has increased at the Port of Durban. Due to the lack of maintenance, this has resulted in road deterioration. Roads are considered as the most important transport mode at the Port of Durban. It is an important mean for facilitating economic growth of local, regional and national industries. For the Port to maintain global competitiveness with the current trend of globalization, it has to be ensured that the roads are well maintained. The purpose of the paper is to provide an overview of road condition within and outside the Port. Verification and assessment of the condition of the existing eight major roads was conducted. Comparisons between the condition of the eight major roads within and outside the Port were highlighted. Conclusions and recommendations were also drawn based on the findings.
One of the Sustainable Safety principles is that a road should have a recognizable design and a predictable alignment. If this is the case, road users know how they are expected to behave and what they can expect from other road users, so that crashes may be prevented. For roads to be recognizable,
World Bank Group
Infrastructure projects, and more specifically, roads construction, and maintenance are one of the core operations of the World Bank. However, despite the increase of gender mainstreaming efforts in transport projects little is known about the effects of these interventions on women’s agency defined as the ability to make effective choices and transform these choices into desired outcomes’...
Joshi M P
Full Text Available Automobile repair workers are at risk of developing skin morbidity including occupational dermatoses because of their exposure to mineral oils, petroleum products and its derivatives and lubricating oil. This cross- sectional study was carried out at Maharashtra State Road Transport Corporation workshops in Nagpur city to investigate prevalence of skin morbidity including contact dermatitis in automobile repair workers. The study included 288 (49.9% automobile repair workers 180 (31.3% workshop office staff and 109 (18.8% divisional office employees. Dermatitis was the commonest skin morbidity in all the study subjects and it was significantly more prevalent in automobile repair workers. Folliculitis was detected in 13.2% of auto â€" repair workers and was not seen in the other two groups. Increasing trend of skin morbidity was correlated with the length of service of employees. Proper protective measures along with suitable washing facilities should be provided
... provisions; (3) removal of budgets for sources other than on-road mobile sources; (4) changes to the trigger... removal from the maintenance plan of the budgets for area, on-road mobile, and point sources. D. Section... Standard for Salt Lake and Davis Counties AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule...
Borgström, Benedikte; Gammelgaard, Britta; Bruun, Poul
Road transport is an important sector, connecting time and space of production and consumption. Its market conditions has changed. The EU single market implementation has increased price pressure due to supply of low cost road freight transport from counties with lower cost structures. Changes...... in the market also encourage strategic development of some road hauliers into providers of unique services. Such road haulier strategic development contributes to efficiency and effectiveness in basically all business sectors of EU. Little research is available of such strategic and operational management....... In this paper we will explore that knowledge gap and analyze what value proposition(s) and capabilities can transform potential cost disadvantages of acting in a market that includes both high- and low-cost-country actors? And in conceptual terminology, how are capabilities deployed and developed to construct...
Vermont Center for Geographic Information — Link it ArcGIS Item is HERE.The connectivity layer was created to assist municipalities in preparing for the forthcoming DEC Municipal Roads General Permit in 2018....
A barn caught fire at on Seerley Road, Indianapolis. Five storage drums believed to contain metallic potassium were involved in the fire. EPA will perform additional sampling as part of removal operations and safe offsite transportation.
Minnesota Department of Natural Resources — ArcView shape file of roads administered by the Commissioner of Natural Resources to provide access to lands administered by the Division of Forestry. Most, but not...
*These are national-level rules. Australian Road Rules - 2009 Version, Part 18, Division 1, Rule 300 "Use of Mobile Phones" describes restrictions of mobile phone use while driving. The rule basically states that drivers cannot make or receive calls ...
Earth Data Analysis Center, University of New Mexico — Vector line shapefile under the stewardship of the Taos County Planning Department depicting roads in Taos County, New Mexico. Originally under the Emergency...
Minnesota Department of Natural Resources — This data set contains roadway centerlines for township administered roads found on the USGS 1:24,000 mapping series. In some areas, these roadways are current...
Luxhoj, James T.; Thorsteinsson, Uffe; Riis, Jens Ove
An overview of trend in maintenance management and presentation of a situational model and an analytical tools for identification of managerial efforts in maintenance.......An overview of trend in maintenance management and presentation of a situational model and an analytical tools for identification of managerial efforts in maintenance....
Budzynski, Marcin; Jamroz, Kazimierz; Mackun, Tomasz
Every third road accident in Poland involves a pedestrian as a participant or, most of the time, a casualty. Pedestrian accidents are usually the result of complex situations and the outcome of a number of factors related to driver and pedestrian behaviour and road infrastructure. Safety depends largely on how well the traffic condition is perceived and on visibility in traffic. The paper presents the results of analyses of methodologies for systematic studies of pedestrian behaviour and pedestrian-driver relations. The effects of the location of the site, type of cross-section and other selected parameters on pedestrian and driver behaviour are demonstrated. The analyses showed that pedestrians are most often put at risk by too long pedestrian crossings, vehicles going too fast around pedestrian crossings, lack of proper sight distance and poorly lit or unlit pedestrian crossings. The reason for such defective infrastructure is that planners, designers, contractors and maintenance services are not receiving any support from design, marking and maintenance regulations for pedestrian traffic. In addition, the Road Traffic Law is not restrictive enough when it comes to drivers’ obligations towards pedestrian safety. Polish design regulations allow long pedestrian crossings up to four lanes in one direction or three lanes in two directions irrespective of traffic control and speed limits. Pedestrian crossings should be kept at a maximum of three lanes. There is nothing in the design regulations about the required driver-pedestrian sight distance. Neither does the Road Traffic Law help engineers with that. It is legal to park vehicles within 10 m of a pedestrian crossing which does not guarantee the necessary sight distance. Drivers must be able to see a pedestrian waiting or stepping onto the crossing from a distance that will help them come to a stop safely. It is safer to follow the principle of providing adequate pedestrian sight distance. Recommendations for
Francis V. Riedy; Daniel Skelton
Every asset, old or new, requires maintenance. Buildings, bridges, roads, dams, utilities and grounds; each requires some degree of maintenance to ensure long life cycles and safe operation. Maintenance is science, art and philosophy. It is science since its execution ultimately relies on most of all the sciences; it is art because seemingly identical problems...
Full Text Available Drawing on John Agnew’s (1987 theoretical framework for the analysis of place (location, locale and sense of place and on Doreen Massey’s (1991 interpretation of Kilburn High Road (London, the contribution develops an analysis of the notion of place in the case study of Kilburn High Road by comparing the semantics emerging from Doreen Massey’s interpretation of Kilburn High Road in the late Nineties with those from a selection of noisy and unstructured volunteered geographic information collected from Flickr photos and Tweets harvested in 2014–2015. The comparison shows how sense of place is dynamic and changing over time and explores Kilburn High Road through the categories of location, locale and sense of place derived from the qualitative analysis of VGI content and annotations. The contribution shows how VGI can contribute to discovering the unique relationship between people and place which takes the form given by Doreen Massey to Kilburn High Road and then moves on to the many forms given by people experiencing Kilburn High Road through a photo, a Tweet or a simple narrative. Finally, the paper suggests that the analysis of VGI content can contribute to detect the relevant features of street life, from infrastructure to citizens’ perceptions, which should be taken into account for a more human-centered approach in planning or service management.
Arianto, T.; Suprapto, M.; Syafi’i
The pavement condition will decrease due to the influence of traffic and environment, so that the maintenance effort is needed to maintain the road condition during the service period. In order to carry out road maintenance activities right on target, there needs to be a plan based on accurate pavement condition data. Road roughness is the most commonly used condition parameter in evaluating pavement conditions objectively because road roughness data is relatively easy to obtain, well correlated with vehicle operating costs and the most relevant parameter in road functional performance measurement. The Roadroid is an Android-based application that measures road roughness by using vibration sensors on a smartphone so it is possible to get an International Roughness Index (IRI) value as an indicator of pavement conditions more easily and efficiently. Besides based on road roughness, pavement condition evaluation can also be done visually by using Surface Distress Index (SDI) method that uses the total crack area parameters, average crack width, total number of potholes and the average depth of rutting. This study attempts to assess the condition of Jenderal Sudirman-Kalianget road by combining IRI Roadroid value and SDI value which will be used as the basis to determine the required road maintenance. This road segment is one of the national strategic road connecting the center of Sumenep regency with the Kalianget harbor. Based on IRI measurement and SDI calculation, the pavement condition of Jenderal Sudirman-Kalianget road can be described 4.2 kilometers (37.17%) were good and 2.3 kilometers (20.35%) were fair that need routine maintenance. While 2.1 kilometers (18.58%) were bad and 2.7 kilometers (23.89%) were poor that need periodical maintenance and reconstruction.
Full Text Available The periodic inspection of certain infrastructure features plays a key role for road network safety and preservation, and for developing optimal maintenance planning that minimize the life-cycle cost of the inspected features. Mobile Mapping Systems (MMS use laser scanner technology in order to collect dense and precise three-dimensional point clouds that gather both geometric and radiometric information of the road network. Furthermore, time-stamped RGB imagery that is synchronized with the MMS trajectory is also available. In this paper a methodology for the automatic detection and classification of road signs from point cloud and imagery data provided by a LYNX Mobile Mapper System is presented. First, road signs are detected in the point cloud. Subsequently, the inventory is enriched with geometrical and contextual data such as orientation or distance to the trajectory. Finally, semantic content is given to the detected road signs. As point cloud resolution is insufficient, RGB imagery is used projecting the 3D points in the corresponding images and analysing the RGB data within the bounding box defined by the projected points. The methodology was tested in urban and road environments in Spain, obtaining global recall results greater than 95%, and F-score greater than 90%. In this way, inventory data is obtained in a fast, reliable manner, and it can be applied to improve the maintenance planning of the road network, or to feed a Spatial Information System (SIS, thus, road sign information can be available to be used in a Smart City context.
Dudak, Juraj; Gaspar, Gabriel; Sedivy, Stefan; Pepucha, Lubomir; Florkova, Zuzana
A considerable funds is spent for the roads maintenance in large areas during the winter. The road maintenance is significantly affected by the temperature change of the road structure. In remote locations may occur a situation, when it is not clear whether the sanding is actually needed because the lack of information on road conditions. In these cases, the actual road conditions are investigated by a personal inspection or by sending out a gritting vehicle. Here, however, is a risk of unnecessary trip the sanding vehicle. This situation is economically and environmentally unfavorable. The proposed system solves the problem of measuring the temperature profile of the road and the utilization of the predictive model to determine the future development trend of temperature. The system was technically designed as a set of sensors to monitor environmental values such as the temperature of the road, ambient temperature, relative air humidity, solar radiation and atmospheric pressure at the measuring point. An important part of the proposal is prediction model which based on the inputs from sensors and historical measurements can, with some probability, predict temperature trends at the measuring point. The proposed system addresses the economic and environmental aspects of winter road maintenance.
Engström, Niclas; Andrén, Henrik; Nybacka, Mikael; Fransson, Lennart; Larsson, Roland
The Swedish road administration sees a need to improve the road grip estimation capacity for the Swedish road system. The challenge is to find methods to measure road grip fast and reliable. There where six different system types at the tests in Arjeplog, three continuous, two system measuring road grip through deceleration and one system based on GPS and accelerometers. Two system types used air craft runway tires. The other systems used either studded winter tires or friction winter tires. ...
In the recent past, the primary function of the preventive maintenance program at a nuclear power plant was to maintain the operability and reliability of the plant. Reducing overall maintenance costs by performing effective preventive maintenance, instead of more costly and disruptive corrective maintenance, instead of more costly and disruptive corrective maintenance, was a secondary consideration. In today's operating environment, the preventive maintenance program must meet the test of cost-effectiveness as well as many new standards for performance that are being required by rate regulators. The preventive maintenance program must be able to withstand the challenge of independent audit to a new standard of technical adequacy and compliance with recommendations from component vendors. In this new environment, the standard that is being applied at the San Onofre nuclear generating station (SONGS) is that the preventive maintenance program must meet the test of cost-effectiveness, improve equipment performance, support increased plant availability, and (a) literally implement the recommendations of the vendor, (b) provide other compensation for the vendor recommendation, or (c) provide technical justification for the deviation. The subject of this paper is the way that reliability-centered maintenance (RCM) is helping SONGS meet these challenges
Department of Homeland Security — These inland electronic Navigational charts (IENCs) were developed from available data used in maintenance of Navigation channels. Users of these IENCs should be...
Banu Bilge Sarihan
Full Text Available The concept of alimony; the dictionary defines as, the whole of what is needed to make a living; as the legal sense is defined as connected with one month to one court decision that obliged to provide for. Family members of a moral rule, first of all to help each other. This moral without often any coercion parties in the framework adapts to this rule, but in this case the legislator for the processing always smoothly, has made it a statutory duty by going to road regulations to help each other for certain family members. Assistance in the form of alimony and child support maintenance can be divided into two main groups. Support resulting from family law, commonly referred to as maintenance support. Maintenance alimony; temporary alimony, child maintenance and poverty alimony. The care and upbringing of children in the marital union is entitled to custody of the mother and father in the framework. Mother and father use custody together. Custody of minors and adult children must sometimes restricted to persons, about paying attention to both the goods and to represent them as a whole of the rights and obligations of the law have been installed on the parents. Common life of the spouses or by court order issued at the end of separation has occurred judge may give custody to one of the spouses. side with custody of children have been left to him is obliged to look after and educate them. However, not given custody of his side, must participate in their child's care and education expenses amount to be determined by the judge according to financial strength. Associates alimony, separation or nullity or divorce, child custody as a result of which he had left his wife, child care and the financial strength to participate in the rate training expenses. Associates alimony, not a liability connected to custody, is a natural consequence of being parents. Because spouses are obliged to take care of children's care and upbringing. Child maintenance is
Marston, T.U.; Gelhaus, F.; Burke, R.
The purpose of this paper is to provide the reader with an idea of the advanced maintenance research program at the Electric Power Research Institute (EPRI). A brief description of the maintenance-related activities is provided as a foundation for the advanced maintenance research projects. The projects can be divided into maintenance planning, preventive maintenance program development and implementation, predictive (or conditional) maintenance, and innovative maintenance techniques. The projects include hardware and software development, human factors considerations, and technology promotion and implementation. The advanced concepts include: the incorporation of artificial intelligence into outage planning; turbine and pump maintenance; rotating equipment monitoring and diagnostics with the aid of expert systems; and the development of mobile robots for nuclear power plant maintenance
Highway construction and maintenance workers face numerous hazards on job sites, many of which are unique by industry standards. Despite the exposure of state transportation agency employees and contractors to these hazards, there are few safety stan...
Control rod drive mechanism (CRDM) replacement and rebuilding is one of the highest dose, most physically demanding, and complicated maintenance activities routinely accomplished by BWR utilities. A recent industry workshop sponsored by the Oak Ridge National Laboratory, which dealt with the effects of CRDM aging, revealed enhancements in maintenance techniques and tooling which have reduced ALARA, improved worker comfort and productivity, and have provided revised guidelines for CRDM changeout selection. Highlights of this workshop and ongoing research on CRDM aging are presented in this paper
Gracia-Orellan, J. M.; Gonzalez, P. L.; Verdu, M. F.; Fernandez, J. A.
Iberinco Nuclear Generation Department have wanted to promote service activities in nuclear power plants for years besides its dedication to engineering activities. for it, in 1997 Nuclear Services Management was created to complement engineering activities and to be able to make an offer for products and turn key services. People involved in this Management have an extensive experience in Services Area, so that all type of maintenance works are promoted, as well other services like dismantling, fallout management and new equipment's for nuclear power plants services. Iberinco's experience in Support Services in Nuclear Power Plants allows to answer effectively to special workers during operation cycle and outages periods. These activities have been made in spanish nuclear power plants and Angra I and II plants, both of them in Brazil. In this area we provide Technical Consulting Management and Supervision to develop the following activities: - Improvement Maintenance Programs based in PSA: Implantation of Maintenance Rule in the plants. - Supervision and Assembly of design modifications in structures, systems and components. - Fulfilment of efficiency tests, inspection and turbo-group modification. - Noise and vibrations analysis. - Valves and rotative equipment calculations and diagnosis tests. Iberinco develop these outage activities itself or as contractors coordinator under its management. A lot of them have been working with Iberinco for many years and have a great experience in the Service Area they are developing. In this article, the main outage activities developed for Iberinco are detailed. (Author)
Ybema,J.F.; Giesen, F.
Due to an ageing population and global economic competition, there is a societal need for people to extend their working lives while maintaining high work productivity. This article presents an overview of the labour participation, job performance, and job characteristics of older workers in the
This is the preliminary report on the results obtained in the Migrating Worker-project. This project was initiated by the Danish Ministry of Finance with the aim of illustrating the effects of the 1408/71 agreement and the bilateral double taxation agreements Denmark has with the countries included...
Climate Projection Data base for Roads - CliPDaR: Design a guideline for a transnational database of downscaled climate projection data for road impact models - within the Conference's of European Directors of Roads (CEDR) TRANSNATIONAL ROAD RESEARCH PROG
Matulla, Christoph; Namyslo, Joachim; Fuchs, Tobias; Türk, Konrad
The European road sector is vulnerable to extreme weather phenomena, which can cause large socio-economic losses. Almost every year there occur several weather triggered events (like heavy precipitation, floods, landslides, high winds, snow and ice, heat or cold waves, etc.), that disrupt transportation, knock out power lines, cut off populated regions from the outside and so on. So, in order to avoid imbalances in the supply of vital goods to people as well as to prevent negative impacts on health and life of people travelling by car it is essential to know present and future threats to roads. Climate change might increase future threats to roads. CliPDaR focuses on parts of the European road network and contributes, based on the current body of knowledge, to the establishment of guidelines helping to decide which methods and scenarios to apply for the estimation of future climate change based challenges in the field of road maintenance. Based on regional scale climate change projections specific road-impact models are applied in order to support protection measures. In recent years, it has been recognised that it is essential to assess the uncertainty and reliability of given climate projections by using ensemble approaches and downscaling methods. A huge amount of scientific work has been done to evaluate these approaches with regard to reliability and usefulness for investigations on possible impacts of climate changes. CliPDaR is going to collect the existing approaches and methodologies in European countries, discuss their differences and - in close cooperation with the road owners - develops a common line on future applications of climate projection data to road impact models. As such, the project will focus on reviewing and assessing existing regional climate change projections regarding transnational highway transport needs. The final project report will include recommendations how the findings of CliPDaR may support the decision processes of European
Burstyn, I; Kromhout, H; Boffetta, P
Workers in the road construction industry include asphalt plant, ground construction, and road paving workers. These individuals can be exposed to a wide range of potentially hazardous substances. A summary of levels of exposure to different substances measured during road construction is presented. In modern road paving, workers typically are exposed to 0.1 to 2 mg/m3 of bitumen fume, which includes 10 to 200 ng/m3 of benzo(a)pyrene. Sampling strategies and analytical methods employed in each reviewed survey are described briefly. The published reports provide some insight into the identity of factors that influence exposure to bitumen among road construction workers: type of work performed, meteorological conditions, temperature of paved asphalt. However, there is a lack of (a) comprehensive and well-designed studies that evaluate determinants of exposure to bitumen in road construction, and (b) standard methods for bitumen sampling and analysis. Information on determinants of other exposures in road construction is either absent or limited. It is concluded that data available through published reports have limited value in assessing historical exposure levels in the road construction industry.
Full Text Available The application of Analytic Hierarchy Process (AHP method for the prioritization of pavement maintenance sections is widespread now-a-days. Although the evaluation of pavement maintenance section through AHP method is simple, where the relative importance (on Saaty’s scale assigned to each parameter in the hierarchy varies between the experts (transportation professionals consulted, which leads to discrepancies in the final rankings of the sections’, due to the subjectivity in the process. Further, experts base their decisions solely on their experience while consideration is not given to the actual quantitative physical condition of the roads. To overcome these difficulties an objective based AHP method is proposed in this study, where pairwise comparison values are assigned based on the collected field data from a road network in Mumbai city, consisting of 28 road sections. The final ranking list of candidate sections takes into consideration the priority weight of alternatives, which reflect the road conditions. The solution of priority ratings of AHP method is compared with the corresponding solution of road condition index method, a traditional pavement maintenance procedure. The findings of the present study suggest that objective based AHP method is more suitable for the prioritization of pavement maintenance of roads. Keywords: Prioritization, Analytic Hierarchy Process, Road condition index, Objective method, Rating and ranking
This report establishes procedures for managing dirt and gravel roads, with a primary focus on smaller agencies, such as Wyoming counties, that must manage their roads with very limited resources. The report strives, first, to guide and assist smalle...
This report establishes procedures for managing dirt and gravel roads, with a primary focus on smaller agencies, such as Wyoming counties, that must manage their roads with very limited resources. The report strives, first, to guide and assist smalle...
This report establishes procedures for managing dirt and gravel roads, with a primary focus on smaller agencies, such as Wyoming counties, that must manage their roads with very limited resources. The report strives, first, to guide and assist smalle...
requires the MOF to collect the fuel tax revenue and place it into a special account and transfer the funds to the MOPW for road maintenance...objectives of this audit were to determine the extent to which (1) U.S. agencies have fully accounted for the road construction they funded in...335 million for short-term employment programs, including road construction, in support of counterinsurgency efforts. Although USAID could account
Kanai, T.; Takahashi, Y.; Takahashi, K.; Nishino, M.; Takeshige, R.
The maintenance work management system supports the efficient drawing up of various documents for the maintenance work at nuclear power stations and the speeding up of the permission procedure. In addition, it improves the quality assurance of the safety and reliability of the maintenance work. Key merits of the system are: 1. Efficiently drawing up various documents for the maintenance work by using the stored data for the previous maintenance work and the pipe and instrument diagram (P and ID) data. 2. Supporting the management work for the completion of maintenance work safety by using the isolation information stored on the computer system. 3. Speeding up the permission procedure by electronic mail and electronic permission. 4. Displaying additional information such as the specifications of equipment, maintenance result, and maintenance plan by linking up with the database of another system. 5. Reducing the cost of hardware devices by using client/server network configurations of personal computers and a personal computer server. (author)
The Winter Performance Index is a method of quantifying winter storm events and the DOTs response to them. : It is a valuable tool for evaluating the States maintenance practices, performing post-storm analysis, training : maintenance personnel...
Hasanuddin; Setyawan, A.; Yulianto, B.
Assessment to the performance of road pavement is deemed necessary to improve the management quality of road maintenance and rehabilitation. This research to evaluate the road base on functional and structural and recommendations handling done. Assessing the pavement performance is conducted with functional and structural evaluation. Functional evaluation of pavement is based on the value of IRI (International Roughness Index) which among others is derived from reading NAASRA for analysis and recommended road handling. Meanwhile, structural evaluation of pavement is done by analyzing deflection value based on FWD (Falling Weight Deflectometer) data resulting in SN (Structural Number) value. The analysis will result in SN eff (Structural Number Effective) and SN f (Structural Number Future) value obtained from comparing SN eff to SN f value that leads to SCI (Structural Condition Index) value. SCI value implies the possible recommendation for handling pavement. The study done to Simpang Tuan-Batas Kota Jambi road segment was based on functional analysis. The study indicated that the road segment split into 12 segments in which segment 1, 3, 5, 7, 9, and 11 were of regular maintenance, segment 2, 4, 8, 10, 12 belonged to periodic maintenance, and segment 6 was of rehabilitation. The structural analysis resulted in 8 segments consisting of segment 1 and 2 recommended for regular maintenance, segment 3, 4, 5, and 7 for functional overlay, and 6 and 8 were of structural overlay.
Nerland, Annette Smørholm
Maintenance can be a contributing factor to unwanted events, as well as desired events and states. Human competence can be defined as the ability to perform a specific task, action or function successfully, and is therefore a key factor to proper execution of maintenance tasks. Hence,maintenance will have negative consequences if done wrong, and give positive results when done right. The purpose of this report is to study the many aspects of maintenance competence. Endeavoring to improve ...
Yannis, G. Weijermars, W.A.M. Gitelman, V. Vis, M. Chazirisa, A. Papadimitriou, E. & Lima Azevedo, C.
Various road safety performance indicators (SPIs) have been proposed for different road safety research areas, mainly as regards driver behaviour (e.g. seat belt use, alcohol, drugs, etc.) and vehicles (e.g. passive safety); however, no SPIs for the road network and design have been developed. The
Hafız Hulusi ACAR
Full Text Available It is required that the capital used for construction of road must be technical, economical and used in its location. For this reason, the projects must be prepared for forest roads and all operations belong to roads must be guided according to these projects. In this investigation, available forest road network plan and constructed forest roads were investigated at the point of view technical and forest transportation. After this, it were studied to reach the highest exploitation rate as can as possible. Available forest road density were found as 11.9 m/ha in forest areas for Yesiltepe District. In this condition, exploitation rate was 78 %. After that, optimum forest road network were planned and road density were reached to 22 m/ha and exploitation rate to 86 %. Directed sample method were used from taking soil sample methods and samples were took in mixed system. According to results of the experiments, available forest roads were found in a good degree at the point of view endurance, pressing and transportation capacity. With these results, it is aimed to reach higher exploitation rate with given attention to landslide areas during planning of forest roads on the mountain areas such as Black Sea Region. For this reason, required importance must be given to planning of truck and logging roads. Ground analysis must be done and took care before during planning process of forest road network.
Mandiartha, P.; Duffield, C. F.; Razelan, I. S. b. M.; Ismail, A. b. H.
This paper presents an optimization model for selection of pavement maintenance intervention using a theory of Markov Decision Processes (MDP). There are some particular characteristics of the MDP developed in this paper which distinguish it from other similar studies or optimization models intended for pavement maintenance policy development. These unique characteristics include a direct inclusion of constraints into the formulation of MDP, the use of an average cost method of MDP, and the policy development process based on the dual linear programming solution. The limited information or discussions that are available on these matters in terms of stochastic based optimization model in road network management motivates this study. This paper uses a data set acquired from road authorities of state of Victoria, Australia, to test the model and recommends steps in the computation of MDP based stochastic optimization model, leading to the development of optimum pavement maintenance policy.
Asphalt Inst., College Park, MD.
Maintenance methods that can be used equally well in all regions of the country have been developed for the use of asphalt in pavement maintenance. Specific information covering methods, equipment and terminology that applies to the use of asphalt in the maintenance of all types of pavement structures, including shoulders, is provided. In many…
The present conference paper deals with methods of optimizing the surface maintenance of steel-made offshore installations. The paper aims at identifying important approaches to the problems regarding the long-range planning of an economical and cost effective maintenance program. The methods of optimization are based on the obtained experiences from the maintenance of installations on the Norwegian continental shelf. 3 figs
Maintenance planning and management for the technological equipment of the Dukovany NPP are described. A Maintenance Control and Evaluation System has been developed and is in use to help manage the complex maintenance issue. Practical examples of outputs of the System, with a comprehensive use of the cost, reliability and safety related data, are presented. (author)
Kansas Data Access and Support Center — This version of the Kansas Road Centerline File (0801) represents the first effort to create a statewide roads layer from best available data sources. KGS integrated...
Maizlish, N; Beaumont, J; Singleton, J
Standardized proportional mortality ratios (PMR) were computed for a population of highway workers. Hazards of highway maintenance work include exposure to solvents, herbicides, asphalt and welding fumes, diesel and auto exhaust, asbestos, abrasive dusts, hazardous material spills, and moving motor vehicles. Underlying cause of death was obtained for 1,570 workers who separated from the California Department of Transportation between 1970 and 1983, and who died in California between 1970 and 1983 (inclusive). Among 1,260 white males, the major findings were statistically significant excesses of cancers of digestive organs (PMR = 128), skin (PMR = 218), lymphopoietic cancer (PMR = 157), benign neoplasms (PMR = 343), motor vehicle accidents (PMR = 141), and suicide (PMR = 154). Black males (N = 66) experienced nonsignificant excesses of cancer of the digestive organs (PMR = 191) and arteriosclerotic heart disease (PMR = 143). Among 168 white females, deaths from lung cancer (PMR = 189) and suicide (PMR = 215) were elevated. White male retirees, a subgroup with 5 or more years of service, experienced excess mortality due to cancers of the colon (PMR = 245), skin (PMR = 738), brain (PMR = 556), and lymphosarcomas and reticulosarcomas (PMR = 514). Deaths from external causes (PMR = 135) and cirrhosis of the liver (PMR = 229) were elevated among white males with a last job in landscape maintenance. White males whose last job was highway maintenance experienced a deficit in mortality from circulatory diseases (PMR = 83) and excess mortality from emphysema (PMR = 250) and motor vehicle accidents (PMR = 196). Further epidemiologic and industrial hygiene studies are needed to confirm the apparent excess mortality and to quantify occupational and nonoccupational exposures. However, reduction of recognized hazards among highway maintenance workers is a prudent precautionary measure.
Li, Cheng; Creusen, Ivo; Hazelhoff, Lykele; de With, Peter H. N.
Detection of road lane markings is attractive for practical applications such as advanced driver assistance systems and road maintenance. This paper proposes a system to detect and recognize road lane markings in panoramic images. The system can be divided into four stages. First, an inverse perspective mapping is applied to the original panoramic image to generate a top-view road view, in which the potential road markings are segmented based on their intensity difference compared to the surrounding pixels. Second, a feature vector of each potential road marking segment is extracted by calculating the Euclidean distance between the center and the boundary at regular angular steps. Third, the shape of each segment is classified using a Support Vector Machine (SVM). Finally, by modeling the lane markings, previous falsely detected segments can be rejected based on their orientation and position relative to the lane markings. Our experiments show that the system is promising and is capable of recognizing 93%, 95% and 91% of striped line segments, blocks and arrows respectively, as well as 94% of the lane markings.
Roman, Harry T.
Roadways are literally soaked with petrochemical byproducts, oils, gasoline, and other volatile substances that eventually run off into sewers and end up in rivers, waterways, and other undesirable places. Can the roads be cleaned of these wastes, with their proper disposal? Can vehicles, robots, or other devices be designed that could be driven…
Jensen, Thomas Christian
The paper presents estimations of the effect of bad weather on the observed speed on a Danish highway section; Køge Bugt Motorvejen. The paper concludes that weather, primarily precipitation and snow, has a clear negative effect on speed when the road is not in hypercongestion mode. Furthermore...
"Children have the potential to create a world we cannot imagine. This is our hope." In choosing Montessori, O'Shaughnessy says that we are choosing the road less traveled. We are choosing education as an aid to life. We are choosing an approach that respects the innate and unique potential of each child and that calls upon us to serve…
One of the first lessons new drivers learn is to keep their eyes on the road. Unfortunately, cell phones and other electronic devices are causing many drivers to lose their focus, and sometimes their lives. In this podcast, Rebecca Naumann discusses the dangers of distracted driving.
Horst, A.R.A. van der; Kaptein, N.
As a means to a sustainable safe traffic environment the concept of Self-Explaining Roads (SER) has been developed. The SER concept advocates a traffic environment that elicits safe driving behaviour simply by its design. In order to support safe driving behaviour and appropriate speed choice,
... more annual employee work hours: (1) Maintenance-of-way equipment operating without locomotive... each other. (2) Each maintenance-of-way work group shall have intra-group communications capability... to provide on-track safety for a roadway work group or groups, and each lone worker, shall be...
Both tyre wear and road polishing are complex phenomenon, which are obviously strongly related; the energy that polishes the road is the energy that wears the tyre. The both depend non-linearly on numerous parameters, like materials used, vehicle and road usage, environmental conditions (i.e.
data for the purpose of legal prosecution and insurance claims. The accident data P41 form filled at the Police Stations are collated and forwarded to the Roads Department, Ministry of Roads and Public. Works for further processing and analysis (1, 12). The. Roads Department analyses the information in order to determine:.
Preventive maintenance is very important in achieving high plant availability. For the European Pressurized Reactor (EPR) preventive maintenance has been carefully addressed in the design stage. This is particularly necessary because of the traditionally different maintenance strategies employed in France and Germany. This paper emphasizes the following features introduced in the ERP design to minimize the duration of the refueling outage: (1) containment accessibility during power operation; (2) overall plant layout to facilitate inspections and maintenances within the containment; and (3) safety system design for enabling preventive maintenance during power operation. (author)
Modern Electronic Maintenance Principles reviews the principles of maintaining modern, complex electronic equipment, with emphasis on preventive and corrective maintenance. Unfamiliar subjects such as the half-split method of fault location, functional diagrams, and fault finding guides are explained. This book consists of 12 chapters and begins by stressing the need for maintenance principles and discussing the problem of complexity as well as the requirements for a maintenance technician. The next chapter deals with the connection between reliability and maintenance and defines the terms fai
For utilities operating nuclear powerplants, the rules of the game continue to change. Conflicting regulatory pressures and a tougher competitive environment will make management's job more complicated and difficult in the 1990s. Dealing with these pressures successfully requires greater attention to maintenance effectiveness. Utilities can help shape their future environment by developing a well-planned strategy to guide their actions. Parts of the strategy that are discussed include developing a sound maintenance philosophy, selecting a service company, radiation exposure, and managing spare parts. This article also addresses the Swedish experience in maintenance, German philosophy regarding maintenance and the current maintenance practices of the Electricite de France
GEAMBASU Gabriel George
Full Text Available The paper presents the maintenance process that is done on an airplane, at a certain period of time, or after a number of flight hours or cycles and describes the checks performed behind each inspection. The first part of research describes the aircraft maintenance process that has to be done after an updated maintenance manual according with aircraft type, followed by a short introduction about maintenance hangar. The second part of the paper presents a hangar design with a foldable roof and walls, which can be folded or extended, over an airplane when a maintenance process is done, or depending on weather condition.
Full Text Available Road construction machinery is one of the largest and stable sectors of national economy. With the help of road-building machinery, construction, maintenance and repair of highways are carried out. Modern system of road and building machines is a complex of high-performance machines and mechanisms, of large and small capacity and productivity. Expansion of paved roads network of both federal and local values, use of resource-saving technologies, increasing of pace and quality of work, ensuring of reliability and durability of highways have a major impact on the development of road construction machinery. The level of foreign road and construction machinery puts forward complex requirements for compliance with world safety and environmental standards, increasing equipment mobility, expanding areas of effective use and, finally, increasing its capacity and productivity. Article contains approach to the calculation of the operational productivity of asphalt pavers that takes into account technical characteristics and conditions of works production and contributes to the reliability of decisions on organization and management of road maintenance works on urban roads.
Rohan, M. de
This paper is concerned principally with Maintenance Management systems and their effective introduction into organisations. Maintenance improvement is basically a problem of managing the maintenance department in the broadest sense. Improvement does not only lie in the area of special techniques, systems or procedures; although they are valuable tools, but rather in a balanced attack, carefully guided by management. Over recent years, maintenance systems have received the major emphasis and in many instances the selection of the system has become a pre-occupation, whereas the importance of each maintenance function must be recognised and good management practices applied to all maintenance activities. The ingredients for success in the implementation of maintenance management systems are summarised as: having a management committee, clear objectives, project approach using project management techniques and an enthusiastic leader, user managed and data processing supported project, realistic budget and an understanding of the financial audit requirements. (author)
Sturm, A [Hamburgische Electacitaets-Werke AG Hamburg (Germany)
The establishment of maintenance strategies is of crucial significance for the reliability of a plant and the economic efficiency of maintenance measures. Knowledge about the condition of components and plants from the technical and business management point of view therefore becomes one of the fundamental questions and the key to efficient management and maintenance. A new way to determine the maintenance strategy can be called: Knowledge Based Maintenance. A simple method for determining strategies while taking the technical condition of the components of the production process into account to the greatest possible degree which can be shown. A software with an algorithm for Knowledge Based Maintenance leads the user during complex work to the determination of maintenance strategies for this complex plant components. (orig.)
Sturm, A. [Hamburgische Electacitaets-Werke AG Hamburg (Germany)
The establishment of maintenance strategies is of crucial significance for the reliability of a plant and the economic efficiency of maintenance measures. Knowledge about the condition of components and plants from the technical and business management point of view therefore becomes one of the fundamental questions and the key to efficient management and maintenance. A new way to determine the maintenance strategy can be called: Knowledge Based Maintenance. A simple method for determining strategies while taking the technical condition of the components of the production process into account to the greatest possible degree which can be shown. A software with an algorithm for Knowledge Based Maintenance leads the user during complex work to the determination of maintenance strategies for this complex plant components. (orig.)
H. Hulusi Acar
Full Text Available Forestry management has activities dealing with technical, economic, social and environmental services. Forestry operations which are carried out on forest areas , an important part of the ecosistem are materialized in open space. This forestry activities on large areas and high sloping generally, include many different techniques. It is needed primarily to the forest road network in terms of forest management. Determining the approriate route in the natural environment, planning and road construction affairs for forest roads which are necessary accessing in forest areas, is also of great importance from an environmental viewpoint as well as technical and economic manner. Forest road planning which can not be changed later and left a permanent mark on the natural environment carries much more importance to the environment especially on sloping land. This is because, it is important choosing correct type of roaf structure, and doing periodic maintenance of the roads. Skidding activities, after wood production, is important in terms of its impact on forest soil and by means of effects on saplings and trees on the releated forest areas.The development of environmental sensitive techniques is difficult, limited or expensive for this wood extraction works which are made more difficult conditons in the sloping terrain. Therefore, especially in using some silvicultural methods wood extraction damages are even greater. In this study; some road planning, road construction and wood extraction techniques which performed by me have been made to examine the environmental aspects. Environment-friendly forest roads and primary transport techniques on the forest ecosystem are briefly explained and discussed in the frame of the environmental aspects.
Михаил Юрьевич Мухин
Full Text Available The article is devoted to the work of the factories in 1941-1945 in the evacuation. The author analyzes the living conditions of workers in evacuated aviation plants, their daily life, maintenance, etc. The author concludes that in the early years of the War the conditions of life of the aviation industry's workers were very difficult, and the welfare and financial situation improved in 1944, the sure sign of fracture in the Second world war.
De Marchis, Paola; Verso, Maria Gabriella; Tramuto, Fabio; Amodio, Emanuele; Picciotto, Diego
Cardiovascular disease is the first cause of morbidity and mortality worldwide. Among several known risk factors, researchers also focus their attention on the chronic exposure to air pollution. There is much evidence that exposure to air pollution, especially to ultrafine particles, can damage the endothelium and can favour cardiovascular diseases in the general population. Occupational exposition could be an additive risk factor for the cardiovascular system. This article presents a scientific review of the linkage between occupational exposure to air pollution and ischemic heart disease. A scientific review was undertaken, followed by PRISMA Statements. Observational studies were selected from several scientific databases, likesuch as Pubmed, Google Scholar, Nioshtic-2 and Reserchgate, searching for selected key words: police workers, professional drivers, mail carriers, filling station attendants, road cleaners, garage workers, motor vehicles and engine maintenance. All the key words were combined with "Boolean Operators" with the following words: cardiovascular (or cardiac) disease, cardiovascular function, cardiovascular system, ischemic heart disease, coronary disease, myocardial infarction. During the systematic research, the focus was on retrospective and prospective studies from January 1990 - December 2014. Both the retrospective and prospective studies showed an increased risk of ischemic heart disease in occupationally occupied people exposed to air pollution. Only one study presented a ly minor risk. The findings of this systematic review suggest a possible linkage between occupational exposure to urban air pollution, especially to motor exhaust and particulate, and ischemic heart disease.
Lindholst, Andrej Christian; Hansen, Morten Balle; Petersen, Ole Helby
(as providers of maintenance services) in the municipal road and park sectors in Denmark over the past 30 years. The study draws theoretically on historical institutionalism as an interpretive framework and empirically on findings from earlier research, register data from municipal accounts as well...... as new survey data. Findings – Marketization within the road and park sectors has historically taken place through gradual changes, in particular by processes of layering and displacement, which has added up to substantial transformations in both sectors. Transformations relate to the levels of private...... sector involvement, the purpose of using private contractors, the extent of competition and the design of contractual arrangements. The road sector has been a frontrunner in this marketization process, while the park sector increasingly has been “catching up.” Originality/value – The paper contributes...
The paper deals with the efficiency of road tax in the tax system of the Czech Republic, focusing on the administrative costs of taxation on the timeline 2005 to 2009. It contains a theoretical definition of tax efficiency, and describes the types of costs connected with taxes. From this perspective it focuses on quantifying the direct administrative costs of road tax. Direct measurement of administrative costs is done by using the method called the method of recounted worker which classifies...
Gese, J.; Zizka, B.
A draft regulation is presented for the transport of solid and solidified radioactive wastes from nuclear power plants. The draft takes into consideration dosimetric, safety and fire-fighting directives, transport organization, anticipated amounts of radioactive wastes, characteristics of containers, maintenance of vehicles, and equipment of vehicles and personnel. The draft is based on the provisional regulations governing the transport on public roads issued in 1973, valid directives, decrees, acts and standards, and complies with 1973 IAEA requirements. (J.P.)
Ziems, Marcel; Rottensteiner, Franz; Heipke, Christian
In this paper a new approach for automatic road database verification based on remote sensing images is presented. In contrast to existing methods, the applicability of the new approach is not restricted to specific road types, context areas or geographic regions. This is achieved by combining several state-of-the-art road detection and road verification approaches that work well under different circumstances. Each one serves as an independent module representing a unique road model and a specific processing strategy. All modules provide independent solutions for the verification problem of each road object stored in the database in form of two probability distributions, the first one for the state of a database object (correct or incorrect), and a second one for the state of the underlying road model (applicable or not applicable). In accordance with the Dempster-Shafer Theory, both distributions are mapped to a new state space comprising the classes correct, incorrect and unknown. Statistical reasoning is applied to obtain the optimal state of a road object. A comparison with state-of-the-art road detection approaches using benchmark datasets shows that in general the proposed approach provides results with larger completeness. Additional experiments reveal that based on the proposed method a highly reliable semi-automatic approach for road data base verification can be designed.
Papadimitriou, Eleonora; Yannis, George
This research aims to explore the relationship between road safety management and road safety performance at country level. For that purpose, an appropriate theoretical framework is selected, namely the 'SUNflower' pyramid, which describes road safety management systems in terms of a five-level hierarchy: (i) structure and culture, (ii) programmes and measures, (iii) 'intermediate' outcomes'--safety performance indicators (SPIs), (iv) final outcomes--fatalities and injuries, and (v) social costs. For each layer of the pyramid, a composite indicator is implemented, on the basis of data for 30 European countries. Especially as regards road safety management indicators, these are estimated on the basis of Categorical Principal Component Analysis upon the responses of a dedicated road safety management questionnaire, jointly created and dispatched by the ETSC/PIN group and the 'DaCoTA' research project. Then, quasi-Poisson models and Beta regression models are developed for linking road safety management indicators and other indicators (i.e. background characteristics, SPIs) with road safety performance. In this context, different indicators of road safety performance are explored: mortality and fatality rates, percentage reduction in fatalities over a given period, a composite indicator of road safety final outcomes, and a composite indicator of 'intermediate' outcomes (SPIs). The results of the analyses suggest that road safety management can be described on the basis of three composite indicators: "vision and strategy", "budget, evaluation and reporting", and "measurement of road user attitudes and behaviours". Moreover, no direct statistical relationship could be established between road safety management indicators and final outcomes. However, a statistical relationship was found between road safety management and 'intermediate' outcomes, which were in turn found to affect 'final' outcomes, confirming the SUNflower approach on the consecutive effect of each layer
This book focuses on the aspects of contracting contracts, basically related to road construction and management contracts. The book presents an analytical study of Performance-Based Road Management and Maintenance (PMMR), Funktionsbauvertrag (FBV) (Function-Based Construction Contract) and Public Private Partnerships (PPP). A separate chapter is also included about the comparative study of these contract types. The book provides useful material for university libraries, construction companies and government departments of construction.
Exploring random maintenance models, this book provides an introduction to the implementation of random maintenance, and it is one of the first books to be written on this subject. It aims to help readers learn new techniques for applying random policies to actual reliability models, and it provides new theoretical analyses of various models including classical replacement, preventive maintenance and inspection policies. These policies are applied to scheduling problems, backup policies of database systems, maintenance policies of cumulative damage models, and reliability of random redundant systems. Reliability theory is a major concern for engineers and managers, and in light of Japan’s recent earthquake, the reliability of large-scale systems has increased in importance. This also highlights the need for a new notion of maintenance and reliability theory, and how this can practically be applied to systems. Providing an essential guide for engineers and managers specializing in reliability maintenance a...
Soares, C. Guedes; Duarte, J. Caldeira; Garbatov, Y.
the design and during the whole life span of operational use, within an integrated framework founded on risk and reliability based techniques. The document addresses designers, decision makers and professionals responsible for or involved in establishing maintenance plans. The purpose of this document......The present document presents a framework for maintenance planning. Maintenance plays a fundamental role in counteracting degradation effects, which are present in all infrastructure and industrial products. Therefore, maintenance planning is a very critical aspect to consider both during...... is to present maintenance as an integrated approach that needs to be planned, designed, engineered, and controlled by proper qualitative and quantitative techniques. This document outlines the basic premises for maintenance planning and provides the general philosophies that can be followed and points to a best...
Little, S. [Suncor Energy, Calgary, AB (Canada)
Fleet maintenance and reliability at Suncor Energy was discussed in this presentation, with reference to Suncor Energy's primary and support equipment fleets. This paper also discussed Suncor Energy's maintenance and reliability standard involving people, processes and technology. An organizational maturity chart that graphed organizational learning against organizational performance was illustrated. The presentation also reviewed the maintenance and reliability framework; maintenance reliability model; the process overview of the maintenance and reliability standard; a process flow chart of maintenance strategies and programs; and an asset reliability improvement process flow chart. An example of an improvement initiative was included, with reference to a shovel reliability review; a dipper trip reliability investigation; bucket related failures by type and frequency; root cause analysis of the reliability process; and additional actions taken. Last, the presentation provided a graph of the results of the improvement initiative and presented the key lessons learned. tabs., figs.
Full Text Available Road traffic is a problem which is increasing in cities with large population. Unrelated to this fact the number of portable and wearable devices has also been increasing throughout the population of most countries. With this advent, the capacity to monitor and register data about people habits and locations as well as more complex data such as intensity and strength of movements has created an opportunity to contribute to the general wealth and comfort within these environments. Ambient Intelligence and Intelligent Decision Making processes can benefit from the knowledge gathered by these devices to improve decisions on everyday tasks such as deciding navigation routes by car, bicycle or other means of transportation and avoiding route perils. The concept of computational sustainability may also be applied to this problem. Current applications in this area demonstrate the usefulness of real time system that inform the user of certain conditions in the surrounding area. On the other hand, the approach presented in this work aims to describe models and approaches to automatically identify current states of traffic inside cities and use methods from computer science to improve overall comfort and the sustainability of road traffic both with the user and the environment in mind. Such objective is delivered by analyzing real time contributions from those mobile ubiquitous devices to identifying problematic situations and areas under a defined criteria that have significant influence towards a sustainable use of the road transport infrastructure.
Software Evolution and Maintenance: A Practitioner's Approach is an accessible textbook for students and professionals, which collates the advances in software development and provides the most current models and techniques in maintenance.Explains two maintenance standards: IEEE/EIA 1219 and ISO/IEC14764Discusses several commercial reverse and domain engineering toolkitsSlides for instructors are available onlineInformation is based on the IEEE SWEBOK (Software Engineering Body of Knowledge)
Effective maintenance will be an essential ingredient in determining fusion system productivity. This level of productivity will result only after close attention is paid to the entire system as an entity and appropriate integration of the elements is made. The status of fusion maintenance is reviewed in the context of the entire system. While there are many challenging developmental tasks ahead in fusion maintenance, the required technologies are available in several high-technology industries, including nuclear fission
Boudreau, D A; Scheer, W D; Catrou, P G
The increasing level of technical sophistication and complexity found in clinical laboratory instrumentation today more than ever demands careful attention to maintenance service needs. The time-worn caution for careful definition of requirements for acquisition of a system should also carry over to acquisition of maintenance service. Guidelines are presented for specifications of terms and conditions for maintenance service from the perspective of the laboratorian in the automated clinical laboratory.
Zwingelstein, G.; Nguyen Van Nghi, B.
After a recall of the videodisc characteristics, this paper presents its utilization by Electricite de France in the framework of training and maintenance. The SICMA (Interactive Communication System in Maintenance) developed and tested by Electricte de France is presented as also its utilization. It has been tested on the sites of Dampierre and Paluel in the cases of training and maintenance (deconnexion of drive rods of control elements); the conclusions of this experimentation are finally given. 4 refs [fr
Unga, E. [Teollisuuden Voima Oy, Olkiluoto (Finland)
The disturbance-free operation of the turbine plant plays an important role in reaching good production results. In the turbine maintenance of the Olkiluoto nuclear power plant the lifetime and efficiency of turbine components and the lifetime costs are taken into account in determining the turbine maintenance and modernization/improvement program. The turbine maintenance program and improvement/modernization measures taken in the plant units are described in this presentation. (orig.)
Unga, E [Teollisuuden Voima Oy, Olkiluoto (Finland)
The disturbance-free operation of the turbine plant plays an important role in reaching good production results. In the turbine maintenance of the Olkiluoto nuclear power plant the lifetime and efficiency of turbine components and the lifetime costs are taken into account in determining the turbine maintenance and modernization/improvement program. The turbine maintenance program and improvement/modernization measures taken in the plant units are described in this presentation. (orig.)
Industrial plants have become more complex due to technological advancement. This has made the task of maintenance more difficult. The maintenance costs in terms of resources and downtime loss are so high that maintenance function has become a critical factor in a plant's profitability. Industry should devote as much forethought to the management of maintenance function as to production. Maintenance has grown from an art to a precise, technical engineering science. Planning, organizing scheduling and control of maintenance using modern techniques pays dividends in the form of reduced costs and increased reliability. The magnitude and the dimension of maintenance have multiplied due to development in the engineering technologies. Production cost and capacities are directly affected by the breakdown time. Total operating cost including the maintenance cost plays an important role in replacement dimension. The integrated system approach would bring forth the desired results of high maintenance standards. The standards once achieved and sustained, would add to the reliability of the plan and relieve heavy stresses and strains on the engineering logistic support. (author)
Laakso, K.; Simola, K.
The main topics of the presentation include: (1) an analysis model and methods to evaluate maintenance action programs and the support decision to make changes in them and (2) to understand the maintenance strategies in a systems perspective as a basis for future developments. The subproject showed how systematic models for maintenance analysis and decision support, utilising computerised and statistical tool packages, can be taken into use for evaluation and optimisation of maintenance of active systems from the safety and economic point of view
Department of Transportation — The Remote Maintenance and Monitoring System (RMMS) is a collection of subsystems that includes telecommunication components, hardware, and software, which serve to...
Gilbertson, Frank V
.... Used in conjunction with pertinent historical data and developed with Army transformation goals in mind, General Systems thinking can provide the framework for guiding maintenance transformation...
The necessity of establishing the technology of remote maintenance, the kinds of maintenance techniques and the change, the image of a facility adopting remote maintenance canyon process, and the outline of the R and D plan to put remote maintenance canyon process in practical use are described. As the objects of development, there are twin arm type servo manipulator system, rack system, remote tube connectors, solution sampling system, inspection system for in-cell equipment, and large plugs for wall penetration. The outline of those are also reported. The development of new remote maintenance technology has been forwarded in the Tokai Works aiming at the application to a glass solidification pilot plant and a FBR fuel recycling test facility. The lowering of the rate of utilization of cells due to poor accessibility and the increase of radiation exposure of workers must be overcome to realize nuclear fuel cycle technology. The maintenance technology is classified into crane canyon method, direct maintenance cell method, remote maintenance cell method and remote maintenance canyon method, and those are described briefly. The development plan of remote maintenance technology is outlined. (Kako, I.)
Full Text Available Prediction models for low volume village roads in India are developed to evaluate the progression of different types of distress such as roughness, cracking, and potholes. Even though the Government of India is investing huge quantum of money on road construction every year, poor control over the quality of road construction and its subsequent maintenance is leading to the faster road deterioration. In this regard, it is essential that scientific maintenance procedures are to be evolved on the basis of performance of low volume flexible pavements. Considering the above, an attempt has been made in this research endeavor to develop prediction models to understand the progression of roughness, cracking, and potholes in flexible pavements exposed to least or nil routine maintenance. Distress data were collected from the low volume rural roads covering about 173 stretches spread across Tamil Nadu state in India. Based on the above collected data, distress prediction models have been developed using multiple linear regression analysis. Further, the models have been validated using independent field data. It can be concluded that the models developed in this study can serve as useful tools for the practicing engineers maintaining flexible pavements on low volume roads.
Denby, B. R.; Ketzel, M.; Ellermann, T.; Stojiljkovic, A.; Kupiainen, K.; Niemi, J. V.; Norman, M.; Johansson, C.; Gustafsson, M.; Blomqvist, G.; Janhäll, S.; Sundvor, I.
De-icing of road surfaces is necessary in many countries during winter to improve vehicle traction. Large amounts of salt, most often sodium chloride, are applied every year. Most of this salt is removed through drainage or traffic spray processes but a certain amount may be suspended, after drying of the road surface, into the air and will contribute to the concentration of particulate matter. Though some measurements of salt concentrations are available near roads, the link between road maintenance salting activities and observed concentrations of salt in ambient air is yet to be quantified. In this study the NORTRIP road dust emission model, which estimates the emissions of both dust and salt from the road surface, is applied at five sites in four Nordic countries for ten separate winter periods where daily mean ambient air measurements of salt concentrations are available. The model is capable of reproducing many of the salt emission episodes, both in time and intensity, but also fails on other occasions. The observed mean concentration of salt in PM10, over all ten datasets, is 4.2 μg/m3 and the modelled mean is 2.8 μg/m3, giving a fractional bias of -0.38. The RMSE of the mean concentrations, over all 10 datasets, is 2.9 μg/m3 with an average R2 of 0.28. The mean concentration of salt is similar to the mean exhaust contribution during the winter periods of 2.6 μg/m3. The contribution of salt to the kerbside winter mean PM10 concentration is estimated to increase by 4.1 ± 3.4 μg/m3 for every kg/m2 of salt applied on the road surface during the winter season. Additional sensitivity studies showed that the accurate logging of salt applications is a prerequisite for predicting salt emissions, as well as good quality data on precipitation. It also highlights the need for more simultaneous measurements of salt loading together with ambient air concentrations to help improve model parameterisations of salt and moisture removal processes.
... operators of roadway maintenance machines. 214.355 Section 214.355 Transportation Other Regulations Relating... operators of roadway maintenance machines. (a) The training and qualification of roadway workers who operate roadway maintenance machines shall include, as a minimum: (1) Procedures to prevent a person from being...
In the facilities related to atomic energy, from the viewpoint of the reduction of radiation exposure of workers and the heightening of the rate of operation of the facilities, the development of remote maintenance system is regarded as important. Meidensha Electric Manufacturing Co., Ltd. developed the bilateral control type manipulator, BILARM-83, in 1979, and has developed high performance manipulator systems. As the design of the plant that realizes the remote operation maintenance of process machinery and equipment during plant operation, the remote maintenance system by canyon cell techniques, which was adopted in Savannah River plant, USA, and has been operated for nearly 50 years, has been known. The concept of the full remote maintenance system by large scale cell techniques was shown and has been developed by Power Reactor and Nuclear Fuel Development Corp. In order to realize the remote maintenance of such large scale cells, Meidensha is developing the both arm type bilateral servo manipulator, the single arm type power manipulator, the transport system for moving them, the power and signal system and so on. Those systems were adopted for the glass solidification facilities. (K.I.)
Pritchard, O. G.; Hallett, S. H.; Farewell, T. S.
Unclassified roads comprise 60 % of the road network in the United Kingdom (UK). The resilience of this locally important network is declining. It is considered by the Institution of Civil Engineers to be "at risk" and is ranked 26th in the world. Many factors contribute to the degradation and ultimate failure of particular road sections. However, several UK local authorities have identified that in drought conditions, road sections founded upon shrink-swell susceptible clay soils undergo significant deterioration compared with sections on non-susceptible soils. This arises from the local road network having little, if any, structural foundations. Consequently, droughts in East Anglia have resulted in millions of pounds of damage, leading authorities to seek emergency governmental funding. This paper assesses the use of soil-related geohazard assessments in providing soil-informed maintenance strategies for the asset management of the locally important road network of the UK. A case study draws upon the UK administrative county of Lincolnshire, where road assessment data have been analysed against mapped clay-subsidence risk. This reveals a statistically significant relationship between road condition and susceptible clay soils. Furthermore, incorporation of UKCP09 future climate projections within the geohazard models has highlighted roads likely to be at future risk of clay-related subsidence.
Ott, Brian R; Papandonatos, George D; Davis, Jennifer D; Barco, Peggy P
The objective was to compare a standardized road test to naturalistic driving by older people who may have cognitive impairment to define improvements that could potentially enhance the validity of road testing in this population. Road testing has been widely adapted as a tool to assess driving competence of older people who may be at risk for unsafe driving because of dementia; however, the validity of this approach has not been rigorously evaluated. For 2 weeks, 80 older drivers (38 healthy elders and 42 with cognitive impairment) who passed a standardized road test were video recorded in their own vehicles. Using a standardized rating scale, 4 hr of video was rated by a driving instructor. The authors examine weighting of individual road test items to form global impressions and to compare road test and naturalistic driving using factor analyses of these two assessments. The road test score was unidimensional, reflecting a major factor related to awareness of signage and traffic behavior. Naturalistic driving reflected two factors related to lane keeping as well as traffic behavior. Maintenance of proper lane is an important dimension of driving safety that appears to be relatively underemphasized during the highly supervised procedures of the standardized road test. Road testing in this population could be improved by standardized designs that emphasize lane keeping and that include self-directed driving. Additional information should be sought from observers in the community as well as crash evidence when advising older drivers who may be cognitively impaired.
Ott, Brian R.; Papandonatos, George D.; Davis, Jennifer D.; Barco, Peggy P.
Objective The objective was to compare a standardized road test to naturalistic driving by older people who may have cognitive impairment to define improvements that could potentially enhance the validity of road testing in this population. Background Road testing has been widely adapted as a tool to assess driving competence of older people who may be at risk for unsafe driving because of dementia; however, the validity of this approach has not been rigorously evaluated. Method For 2 weeks, 80 older drivers (38 healthy elders and 42 with cognitive impairment) who passed a standardized road test were video recorded in their own vehicles. Using a standardized rating scale, 4 hr of video was rated by a driving instructor. The authors examine weighting of individual road test items to form global impressions and to compare road test and naturalistic driving using factor analyses of these two assessments. Results The road test score was unidimensional, reflecting a major factor related to awareness of signage and traffic behavior. Naturalistic driving reflected two factors related to lane keeping as well as traffic behavior. Conclusion Maintenance of proper lane is an important dimension of driving safety that appears to be relatively underemphasized during the highly supervised procedures of the standardized road test. Application Road testing in this population could be improved by standardized designs that emphasize lane keeping and that include self-directed driving. Additional information should be sought from observers in the community as well as crash evidence when advising older drivers who may be cognitively impaired. PMID:22908688
Full Text Available The paper provides descriptive analysis of the road tax performance in the CR in connection to relevant legal amendments to the Act No. 16/1993 Coll. Data on road tax from 1993 to 2011 were used in this analysis and are available from the Ministry of Finance of the Czech Republic. Road tax in the Czech Republic represents only a small part of the total tax revenue and its collection provides insufficient funds for maintenance and development of road infrastructure in the Czech Republic. Road tax collection is expected to grow in the future as a result of ongoing replacement and modernization of vehicle fleet, growing number of vehicles, strengthening of environmental aspects of taxes and internalisation of costs of transport.
Full Text Available Adviser Abstract Gundo Lashu, the ‘Labour Intensive Rural Roads Maintenance Programme’ that is currently being implemented in Limpopo Province, South Africa has set out to train 24 emerging contractors in rehabilitation of rural gravel roads. All.... The proposal is to treat the in situ materials and sand with a diluted emulsion and a nominal cement application (to assist with breaking of the emulsion) and surface the road with an Otta seal. The aggregate for the Otta seal can be obtained form...
Gonzales, E.; Figueroa, J.
Maintenance labor of the source shielding and locking system is not performed in many Venezuelan enterprises that employ radioactive level gauge in large container. The lack of maintenance and the ambient long lasting action have produced impairment of many devices and their given parts rise to economical and radiological protection problems. In order to help to solve the mentioned problems, principally to reduce the unjustified dose to workers, the IVIC Health Physics Service worked out a protocol to perform, in a safety way, the maintenance of source shielding and its locking system. This protocol is presented in this paper. (authors)
Weidner, Theodore J.
In 2002, APPA published "Maintenance Staffing Guidelines for Educational Facilities," the first building maintenance trades staffing guideline designed to assist educational facilities professionals with their staffing needs. addresses how facilities professionals can determine the appropriate size and mix of their organization. Contents…
Maryani, A.; Partiwi, S. G.; Dewi, H. N. F.
Mucsuloskeletal disorder will affect worker performance and become serious injury when ignored, so that workers cannot work normally. Therefore, an effective strategy plan is needed to reduce the risk of musculoskeletal disorder. A pond worker is profession with high risk of physical complain. Four main activities are ponds preparation, seed distribution, pond maintenance, and harvesting. The methods employed in this current musculoskeletal disorder survey are questionnaire and interview. The result from 73 questionnaires shown that most of pond workers were working for 7 days a week. Prevalence physical complain are on neck, shoulders, upper back, lower back, and knees. The level of perceived complaint is moderate pain. However, most of them do not contact therapists or physicians. Therefore it is necessary to improve the working methods to be able to reduce physical complains due to musculoskeletal disorder.
Kabalevskaya, Alexandra I.
This article analyzes the mechanism of stereotyping as exemplified by gender stereotypes of road users. Gender stereotypes are not only viewed as an a priori image of a percept, but also examined ‘in action’ — at the very moment of their actualization with road users. In the paper we have identified the content of road users’ gender stereotypes; analyzed the behaviour of male and female drivers, pinpointing a number of gender-specific behavioural features; demonstrated that male and female dr...
Dontsov, Alexander; Kabalevskaya, Alexandra
This article analyzes the mechanism of stereotyping as exemplified by gender stereotypes of road users. Gender stereotypes are not only viewed as an a priori image of a percept, but also examined ‘in action’ at the very moment of their actualization with road users. In the paper we have identified the content of road users’ gender stereotypes; analyzed the behaviour of male and female drivers, pinpointing a number of gender-specific behavioural features; demonstrated that male and female driv...
This book introduces information technology road map 2015 with presentation, process, plan and conclusion of it. It also has introduction of IT road map by field : information technology road map 2015 on the next-generation of semiconductor, display, light emitting diode and light industry, home network and home electronic appliances, digital TV and broadcasting, radio technology, satellite communications, mobile communication for the next-generation, BcN field, software, computer for the next-generation and security of knowledge information.
Derbonne, D.R.; Plunkett, T.F.; Simpson, J.R.
During fuel cycle 1 at River Bend station, considerable effort was expended to reduce corrective maintenance work orders (MWOs) to <1,000. This was done by complementing the plant staff with costly contract personnel. Coming out of the first refueling outage, most contract personnel were released. The change in MWO backlog started a steady rise. It became readily apparent that to avoid costly contract staff time, a maintenance improvement program (MIP) was necessary. The MIP Was primarily directed at two areas: crew efficiency improvements and improved preplanned MWO packages. The overall effect of the MIP was to achieve significant productivity improvements with reduced operation and maintenance cost by providing frequent accountability to all levels of maintenance supervision. The MIP also produced a feeling of pride among the maintenance department employees that had not really existed before. This was the best benefit of all
Full Text Available Increased traffic flow on low-volume gravel roads and deficiencies of national road infrastructure, are increasingly apparent in Lithuania. Gravel roads do not comply with requirements, resulting in low driving comfort, longer travelling time, faster vehicle amortization, and dustiness. The control of dustiness is one of the most important road maintenance activities on gravel roads. Another important issue is the assurance of required driving comfort and safety. Soft asphalt and Otta Seal technologies were proposed as a sustainable solution for the improvement of low-volume roads in Lithuania. Five gravel roads were constructed with soft asphalt, and 13 gravel roads were sealed with double Otta Seal, in 2012. The main aim of this research was to check soft asphalt and double Otta Seal’s ability to self-heal, on the basis of the results of the qualitative visual assessment of pavement defects and distress. The qualitative visual assessment was carried out twice a year following the opening of the rehabilitated road sections. The results confirmed soft asphalt and double Otta Seal’s ability to self-heal. The healing effect was more than 13% and 19% on roads with soft asphalt and double Otta Seal, respectively. In addition, on some roads, all cracks observed in spring self-healed during summer.
R. M. Rice; J. Lewis
Logging roads are an important source of forestry-related erosion. The amount of erosion on a forest road is determined by the interaction between how the road is constructed and maintained and the environment in which it is built. The roads in this study were constructed with large bulldozers, and most excavated material was sidecast. The roads studied were...
@@ As everybody knows that automobiles have been greatly changing our life. However, everything has two sides, motor vehicles have also caused a huge number of people's deaths, injuries and property damage. Traffic crashes are perhaps the number one public health problem in developed countries . In the United States, pre-retirement years of life lost in traffic crashes are more than that of the two combined leading diseases: cancer and heart disease . Today road traffic crash (RTC) ranks 11th in leading cause of death and accounts for 2.1% of all deaths globally.
Zemdegs, R.T.; Chout, Q.B.
Approaches to the maintenance of nuclear power plants have undergone significant change in the past several decades. The traditional breakdown approach has been displaced by preventive (calendar-based) maintenance and more recently, by condition-based maintenance (CBM). This is largely driven by the fact that traditional maintenance programs, derived primarily from equipment vendor recommendations, are generally unsuccessful in controlling maintenance costs or equipment failures. Many advances in the maintenance field have taken place since the maintenance plans for Ontario Hydro's nuclear plants were initially established. Ontario Hydro nuclear plant operating costs can be substantially reduced and Incapability Factor improved with the application of modern maintenance processes and tools. Pickering is designated as the lead station for IMP. Of immediate concern is the fact that Pickering Nuclear Division has been experiencing a significant backlog of Operating Preventive Maintenance Callups. This backlog, over 2000, is unacceptable to both station management and the nuclear regulator, the Atomic Energy Control Board. In addition there are over 500 callups in various stages of revision (in hyperspace) without an adequate control nor reporting system to manage their completion. There is also considerable confusion about the classification of l icensing c allups, e.g. callups which are mandatory as a result of legal requirements. Furthermore the ineffectiveness of the Preventive Maintenance (PM) has been the subject of peer audits and Atomic Energy Control Board (AECB) findings over the past several years. The current preventive maintenance ratio PM2 /(PM+CM3) at Pickering ND is less than 20%, due to the current high load of equipment breakdown. This past summer, an Independent Integrated Performance Assessment (IIPA) review at Ontario Hydro confirmed these concerns. Over the past several years, Ontario Hydro nuclear staff have evaluated several programs to improve
Jaarsma, Catharinus F; De Vries, Jasper R
these accident factors. For AV drivers, a driver's training focusing on driving behavior in the presence of vulnerable road users and concluding with an examination is advised. For vehicle safety, actual practice in The Netherlands is inadequate for control of proper maintenance. Some permanent requirements for the AV are insufficiently specific (view) or effective (lighting) and too generous (width). For infrastructure, a wide range of measures is available. A targeted approach to all road system components is urgently needed to avoid a further worsening of existing problems and to reduce the above proportional role of AVs in road danger. Supplemental materials are available for this article. Go to the publisher's online edition of Traffic Injury Prevention to view the supplemental file.
Pillette-Cousin, L.; Stepennov, B.S.; Gorbatchev, A.
The former coastal maintenance base in Gremikha is located in the Kola Peninsula, along the Barents Sea, about 300 km east from Murmansk. There is no road or railway to get there, therefore the only possible connection is either by sea or by helicopter. Remediation of the Gremikha coastal maintenance base (CMB) is now one of the main priorities for Rosatom (the Agency for Atomic Energy of the Russian Federation) because nuclear and radioactive waste are currently stored in conditions which do not meet the up-to-date safety and regulatory requirements and it might represent an environmental hazard and a risk of misappropriation of the nuclear material stored there. (authors)
Full Text Available Background: Allergic contact dermatitis is one of the important occupational hazards in construction workers and it often leads to poor quality of life of the workers with substantial financial loss. However, this is often a neglected entity. There are no past studies on the construction workers in Indian subcontinent. Objective: This pilot study has been done to assess the allergological profile among the workers engaged in construction of roads and bridges. Materials and Methods: The study was conducted among the workers working on construction of a bridge, flyover, and roads in West Bengal, India. Sixteen workers were selected on clinical suspicion. Ten were selected randomly and patch tested with Indian standard battery of patch test allergens. Analysis of reactions and relevance of positive test was assessed as per standard guidelines. Results: All the workers were men. Average age of workers was 24.8 years (range, 19-34 years. Dermatitis affected exposed parts in 93.75% and covered areas in 62.5%. Total positive test was 24 and relevant 11. Most common allergens were chromate (relevant allergy/RA: in 60% of patch tested workers, epoxy resin (RA: 30%, cobalt (RA: 20%, nickel (RA: 20%, thiuram mixture (RA: 10% and black rubber mix (RA: 10%. Two cases (20% had irritant contact dermatitis. Conclusion: The result indicated that chromate is the most frequent allergen among construction workers in this part of India. High frequency of involvement of the covered areas as well as the exposed areas highlighted the fact that the allergens had access to most body parts of the workers.
Wang, Qi; McDaniel, J. Gregory; Sun, Nian X.; Wang, Ming L.
This work presents a non-destructive and non-contact acoustic sensing approach for measuring road profile of road and bridge deck with vehicles running at normal speed without stopping traffic. This approach uses an instantaneous and real-time dynamic tire pressure sensor (DTPS) that can measure dynamic response of the tire-road interaction and increases the efficiency of currently used road profile measuring systems with vehicle body-mounted profilers and axle-mounted accelerometers. In this work, a prototype of real-time DTPS system has been developed and demonstrated on a testing van at speeds from 5 to 80 miles per hour (mph). A data analysis algorithm has been developed to remove axle dynamic motions from the measured DTPS data and to find the transfer function between dynamic tire pressure change and the road profile. Field test has been performed to estimate road profiles. The road profile resolution is approximately 5 to 10 cm in width and sensitivity is 0. 3 cm for the height road surface features at driving speeds of 5 to 80 mph.
Jakabe, Hideo; Maruyama, Yoshinaga
The development program of KEPCO on outage-free maintenance techniques for distribution line work since 1984 is overviewed. It has succeeded in eliminating maintenance outages since 1989. The original aim was to improve customer satisfaction. However, in all, four benefits were realised through the development. These are cost reduction, securing of worker safety, improvement of customer service, and advancement of distribution techniques and morale in KEPCO. The introduction of robotic techniques for maintenance work and manipulator techniques for repair work is planned for further modernization. These new techniques are helping in both work safety and work efficiency improvement. Cost reduction and advancement of distribution line work techniques is also considered. (R.P.)
Cafiso, Salvatore; Di Graziano, Alessandro; Pappalardo, Giuseppina
Because of the low percentage of crashes involving buses and the assumption that public transport improves road safety by reducing vehicular traffic, public interest in bus safety is not as great as that in the safety of other types of vehicles. It is possible that less attention is paid to the significance of crashes involving buses because the safety level of bus systems is considered to be adequate. The purpose of this study was to evaluate the knowledge and perceptions of bus managers with respect to safety issues and the potential effectiveness of various technologies in achieving higher safety standards. Bus managers were asked to give their opinions on safety issues related to drivers (training, skills, performance evaluation and behaviour), vehicles (maintenance and advanced devices) and roads (road and traffic safety issues) in response to a research survey. Kendall's algorithm was used to evaluate the level of concordance. The results showed that the majority of the proposed items were considered to have great potential for improving bus safety. The data indicated that in the experience of the participants, passenger unloading and pedestrians crossing near bus stops are the most dangerous actions with respect to vulnerable users. The final results of the investigation showed that start inhibition, automatic door opening, and the materials and internal architecture of buses were considered the items most strongly related to bus passenger safety. Brake assistance and vehicle monitoring systems were also considered to be very effective. With the exception of driver assistance systems for passenger and pedestrian safety, the perceptions of the importance of other driver assistance systems for vehicle monitoring and bus safety were not unanimous among the bus company managers who participated in this survey. The study results showed that the introduction of new technologies is perceived as an important factor in improving bus safety, but a better understanding
Budzynski, Marcin; Jamroz, Kazimierz; Antoniuk, Marcin
Run-off-road accidents tend to be very severe because when a vehicle leaves the road, it will often crash into a solid obstacle (tree, pole, supports, front wall of a culvert, barrier). A statistical analysis of the data shows that Poland’s main roadside hazard is trees and the severity of vehicles striking a tree in a run-off-road crash. The risks are particularly high in north-west Poland with many of the roads lined up with trees. Because of the existing rural road cross-sections, i.e. having trees directly on road edge followed immediately by drainage ditches, vulnerable road users are prevented from using shoulders and made to use the roadway. With no legal definition of the road safety zone in Polish regulations, attempts to remove roadside trees lead to major conflicts with environmental stakeholders. This is why a compromise should be sought between the safety of road users and protection of the natural environment and the aesthetics of the road experience. Rather than just cut the trees, other road safety measures should be used where possible to treat the hazardous spots by securing trees and obstacles and through speed management. Accidents that are directly related to the road environment fall into the following categories: hitting a tree, hitting a barrier, hitting a utility pole or sign, vehicle rollover on the shoulder, vehicle rollover on slopes or in ditch. The main consequence of a roadside hazard is not the likelihood of an accident itself but of its severity. Poland’s roadside accident severity is primarily the result of poor design or operation of road infrastructure. This comes as a consequence of a lack of regulations or poorly defined regulations and failure to comply with road safety standards. The new analytical model was designed as a combination of the different factors and one that will serve as a comprehensive model. It was assumed that it will describe the effect of the roadside on the number of accidents and their consequences
Rasmussen, W.C.; Haigler, L.B.
This report discusses the occurrence of ground water in relation to certain problems in highway construction and maintenance. These problems are: the subdrainage of roads; quicksand; the arrest of soil creep in road cuts; the construction of lower and larger culverts necessitated by the farm-drainage program; the prevention of failure of bridge abutments and retaining walls; and the water-cement ratio of sub-water-table concrete. Although the highway problems and suggested solutions are of general interest, they are considered with special reference to the State of Delaware, in relation to the geology of that State. The new technique of soil stabilization by electroosmosis is reviewed in the hope that it might find application here in road work and pile setting, field application by the Germans and Russians is reviewed.
Jasiulewicz-Kaczmarek, M.; Stachowiak, A.
The performance and competitiveness of manufacturing companies is dependent on the availability, reliability and productivity of their production facilities. Low productivity, downtime, and poor machine performance is often linked to inadequate plant maintenance, which in turn can lead to reduced production levels, increasing costs, lost market opportunities, and lower profits. These pressures have given firms worldwide the motivation to explore and embrace proactive maintenance strategies over the traditional reactive firefighting methods. The traditional view of maintenance has shifted into one of an overall view that encompasses Overall Equipment Efficiency, Stakeholders Management and Life Cycle assessment. From practical point of view it requires changes in approach to maintenance represented by managers and changes in actions performed within maintenance area. Managers have to understand that maintenance is not only about repairs and conservations of machines and devices, but also actions striving for more efficient resources management and care for safety and health of employees. The purpose of the work is to present strategic analysis based on SWOT analysis to identify the opportunities and strengths of maintenance process, to benefit from them as much as possible, as well as to identify weaknesses and threats, so that they could be eliminated or minimized.
Maekelae, K.; Tuominen, A.
Information on the emissions and energy consumption of different vehicles per transported amount of goods has up to last years been minimal. The unit emissions mean the amount of harmful compounds in the flue gases of a vehicle per service, time or energy unit. National three-year MOBILE 2-research program, started in 1999, determines the unit emissions of all the traffic sectors in Finland. VTT Building and Transport mainly carry out the research, but the Institute of Transportation Engineering of the Tampere University of Technology (TTKK) is responsible for a part of the research. The objective of the project is to create common rules for the determination of unit emissions values, and to determine the best possible values for Finnish conditions. Unit emission data is mainly needed for evaluation of the environmental impacts of production plants and other activities containing transportation of commodities. At the web sites of VTT Building and Transport there are about 60 pages of text and tables (about 4000 values) on unit emissions. The URL of the pages is http://www.vtt.fi/rte/projects/lipastoe/index.htm. These web pages present data on all the transportation sectors (road, railroad, water and air transportation), most of the materials concerning road transportation. Following compounds and values are included: CO, HC, NO x , particulates, SO 2 , CO 2 and energy consumption. Methane and nitrous oxide emissions values have also been presented
Zainal Zaffan Farhana; Prasetijo Joewono; Musa Wan Zahidah
Road accidents are one of the world’s largest public health and injury prevention problems. In Malaysia, the west coast area of Malaysia been stated as the highest motorcycle fatalities and road accidents are one of the factors that cause of death and injuries in this country. The most common fatal accident is between a motorcycle and passenger car. The most of the fatal accidents happened on Federal roads with 44 fatal accidents reported, which is equal to 29%. Lacks of road geometric design...
Strong, D.K. Jr; Wray, D.M.
This paper addresses improving the safety and reliability of power plants in a cost-effective manner by integrating the recently developed reliability centered maintenance techniques with the traditional predictive maintenance techniques of nuclear power plants. The topics of the paper include a description of reliability centered maintenance (RCM), enhancing RCM with predictive maintenance, predictive maintenance programs, condition monitoring techniques, performance test techniques, the mid-Atlantic Reliability Centered Maintenance Users Group, test guides and the benefits of shared guide development
Kaplan, D. I.; Jones, R. M.
The orbit maintenance problem is examined for two low-earth-orbiting space station concepts - the large, manned Space Operations Center (SOC) and the smaller, unmanned Science and Applications Space Platform (SASP). Atmospheric drag forces are calculated, and circular orbit altitudes are selected to assure a 90 day decay period in the event of catastrophic propulsion system failure. Several thrusting strategies for orbit maintenance are discussed. Various chemical and electric propulsion systems for orbit maintenance are compared on the basis of propellant resupply requirements, power requirements, Shuttle launch costs, and technology readiness.
Doyle, E.K.; Lee, C.-G.; Cho, D.
Variant forms of RCM (Reliability Centered Maintenance) have been the maintenance optimizing tools of choice in industry for the last 20 years. Several such optimization techniques have been implemented at the Bruce Nuclear Station. Further cost refinement of the Station preventive maintenance strategy whereby decisions are based on statistical analysis of historical failure data are now being evaluated. The evaluation includes a requirement to demonstrate that earlier optimization projects have long term positive impacts. This proved to be a significant challenge. Eventually a methodology was developed using Crowe/AMSAA (Army Materials Systems Analysis Activity) plots to justify expenditures on further optimization efforts. (authors)
Nuclear power plants maintenance now appears as an important factor contributing to the competitivity of nuclea energy. The articles published in this issue describe the way maintenance has been organized in France and how it led to an actual industrial activity developing and providing products and services. An information note about Georges Besse uranium enrichment plant (Eurodif) recalls that maintenance has become a main data not only for power plants but for all nuclear industry installations. (The second part of this dossier will be published in the next issue: vol. 1 January-February 1989) [fr
Maintenance work will be carried out on the CERN mobile network infrastructure (GSM) on the 23 and 24 July from 6 p.m. to 6 a.m. in order to replace discontinued equipment and to increase the bandwidth capacity of the GSM mobile network. All CERN GSM emitters (40 units) will be moved one by one to the new infrastructure during the maintenance. The call of a user connected to an emitter at the time of its maintenance will be cut off. However, the general overlapping of the GSM radio coverage should mean that users are able immediately to call again should their call be interrupted. IT/CS/CS
Doyle, E. Kevin; Tuomi, Vesa; Rowley, Ian
Since the 1980 s maintenance optimization has been centered around various formulations of Reliability Centered Maintenance (RCM). Several such optimization techniques have been implemented at the Bruce Nuclear Station. Further cost refinement of the Station preventive maintenance strategy includes evaluation of statistical optimization techniques. A review of successful pilot efforts in this direction is provided as well as initial work with graphical analysis. The present situation reguarding data sourcing, the principle impediment to use of stochastic methods in previous years, is discussed. The use of Crowe/AMSAA (Army Materials Systems Analysis Activity) plots is demonstrated from the point of view of justifying expenditures in optimization efforts. (author)
Dr. Hagenzieker's research and education activities focus on the road safety effects of the transport system, with particular interest in road user behaviour aspects. Her PhD-research was on the effects of rewards on road user behaviour.
This paper presents a classification of countries (developing and developed alike), divided into two main categories: an economical and historical entry. When road safety problems are placed into the economical context, it then appears that, among other things: (1) The road safety problem in the
Ungi, T. [Heysham 2 Power Station, Nuclear Electric LTD (United Kingdom)
Plant maintenance is a very complex process which requires considerable effort from both within the maintenance process and also many support activities. It is important that the plant maintenance policy is translated into a maintenance programme which will define all relevant aspects of the maintenance. An aspect of this maintenance programme will be a maintenance catalogue which will define the maintenance activities to be carried out and at what frequencies. This paper is aimed at discussing the maintenance philosophy and resulting maintenance catalogues currently adopted in Nuclear Electric Ltd, and in particular at Heysham 2 Power Station. It goes on to consider whether these maintenance catalogues contain the optimum maintenance and if not should they be changed. If change is required, the process by which this change will be brought about is also discussed. (author)
Margorínová, Martina; Trojanová, Mária; Decký, Martin; Remišová, Eva
Building and improving road infrastructure in Slovakia is currently influenced by the amount of state funding. Therefore, it is necessary to determine the effectiveness of each proposed solution of road project, which is based on life-cycle costs. Besides capital costs, social costs are also important, which valued the negative impacts due to road construction and operation on road users, the environment, and the population living in the affected area. Some components of social costs have shortcomings in quantifying and valuating, which need to be resolved. The one of important components which affects human health and the value of an area, and have some shortcomings are noise costs. Improvement of this component will lead to more accurate valuation of economic efficiency of roads.
Kabalevskaya, Alexandra I.
Full Text Available This article analyzes the mechanism of stereotyping as exemplified by gender stereotypes of road users. Gender stereotypes are not only viewed as an a priori image of a percept, but also examined ‘in action’ — at the very moment of their actualization with road users. In the paper we have identified the content of road users’ gender stereotypes; analyzed the behaviour of male and female drivers, pinpointing a number of gender-specific behavioural features; demonstrated that male and female driving differ from each other in terms of speed, intensity and roughness; and identified the conditions and mechanisms underlying the actualization of gender stereotypes. Based on video and audio materials, we have found that drivers’ gender-specific behavioural features are perceivable to road users: such features trigger the actualization of gender stereotypes as attributive schemes, which determine the interaction between road users, while also laying the foundation for gender stereotypes.
The brochure presents, in full wording, 20 papers read at the experts' meeting ''Maintenance '83'' in Wiesbaden. Most of the papers discuss reliability data (acquisition, evaluation, processing) of nearly all fields of industry. (RW) [de
Lamarche, M.; Guillot, M.; Monier, M.
To improve the overall availability factor of nuclear power plants you have to cut either the forced outage role and the planned outage time or you need to reduce simultaneously the failures and the efforts devoted to avoiding them. Among other results, this goal leads to a decrease in the number of real or anticipated problems. Electricite de France policy, in this matter, is to focus on decreasing the compoents' maintenance needs through a comprehensive modification program, targeted to eliminating the weak points as revealed by the operation. Thereby one may reach, for simple equipment, a nearly maintenance-free condition in which the only maintenance needed is surveillance, which provides assurance that everything is operating properly. A good example of this type of equipment is the family of static components, drums, and pipes whose corrective maintenance is almost nil when their initial condition is good
Rosso, G L; Bruno, Santina; Feola, M; Zanelli, R; Corino, P
Four years after the law concerning first aid in the workplace was passed in Italy (inter-ministerial decree 388/2003), which is a useful tool in improving safety at work, it is necessary to organize first aid courses specifically for those working in the road haulage sector which would also be effective in case of traffic accidents. In view of the characteristics of the working environment in this sector (the road) and of the working conditions (generally workers are isolated and far from the company's headquarters), it would be necessary to organize ad hoc first aid courses at the workplace for the category of professional drivers. The aim of this article is to discuss some possible organizational aspects of first aid in the road haulage sector, such as: number of workers responsible for first aid, how to train workers for specific risks of traffic accidents, the requirements for teachers responsible for first aid and course targets that must be achieved. A good level of training, achieved during the first aid course at the workplace, might therefore be useful to improve road safety and increase the quality of basic and advanced first aid in road traffic injuries.
Worker participation relates to the involvement of workers in the management decision-making processes. In this article attention is focused on worker participation related to occupational safety and health in the Netherlands. Worker participation can refer either to direct or indirect participation
Since 1967, when fuel from LWRs was first transported by road from the Kahl reactor in the Federal Republic of Germany to the Eurochemic reprocessing plant in Belgium, a total of more than 400 road transports have been performed without any adverse effect on the environment. In the beginning, road transport was the dominant mode. However, in recent years large capacity rail flasks with a weight ranging from 80 to 110 tonnes have been put into service in order to cope with the increasing demand of transport services and to replace existing smaller flasks designed primarily for road transport. Therefore, the number of spent fuel transports by road has declined. However, road transport of heavy flasks from reactor sites without a direct rail link to a nearby rail terminal has become an important task and a number of special problems have had to be solved. The following items are discussed, with special emphasis placed on heavy load transports by road from the reactor to a nearby rail terminal: design of road transport equipment to meet the requirements of the national traffic law; application of technical and administrative procedures to meet the IAEA Regulations; transport restrictions due to overload/oversize; transfer of the flask from the reactor to the transport vehicle; handling of the flask at the rail terminal; turn-around inspection and periodic maintenance of equipment to ensure safe performance of transport; and physical protection during transport and handling at rail terminals. (author). 4 figs
The concept of remote maintenance as it pertains to nuclear fuel fabrication facilities is quite unique. The future may require completely remote facilities where maintenance will be performed by hybrid manipulators/robots. These units will be capable of being preprogrammed for automatic operation or manually operated with the operator becoming a part of the closed loop control system. These robots will mesh television, computer control, and direct force feedback manual control in a usable new concept of robotics
Flude, J.W.; Nicholas, J.R.
This Predictive Maintenance Primer provides utility plant personnel with a single-source reference to predictive maintenance analysis methods and technologies used successfully by utilities and other industries. It is intended to be a ready reference to personnel considering starting, expanding or improving a predictive maintenance program. This Primer includes a discussion of various analysis methods and how they overlap and interrelate. Additionally, eighteen predictive maintenance technologies are discussed in sufficient detail for the user to evaluate the potential of each technology for specific applications. This document is designed to allow inclusion of additional technologies in the future. To gather the information necessary to create this initial Primer the Nuclear Maintenance Applications Center (NMAC) collected experience data from eighteen utilities plus other industry and government sources. NMAC also contacted equipment manufacturers for information pertaining to equipment utilization, maintenance, and technical specifications. The Primer includes a discussion of six methods used by analysts to study predictive maintenance data. These are: trend analysis; pattern recognition; correlation; test against limits or ranges; relative comparison data; and statistical process analysis. Following the analysis methods discussions are detailed descriptions for eighteen technologies analysts have found useful for predictive maintenance programs at power plants and other industrial facilities. Each technology subchapter has a description of the operating principles involved in the technology, a listing of plant equipment where the technology can be applied, and a general description of the monitoring equipment. Additionally, these descriptions include a discussion of results obtained from actual equipment users and preferred analysis techniques to be used on data obtained from the technology. 5 refs., 30 figs
During the last years Colombia has increased the use of nuclear techniques, instruments and equipment in ambitious health programs, as well as in research centers, industry and education; this has resulted in numerous maintenance problems. As an alternative solution IAN has established a Central Maintenance Laboratory for nuclear instruments within an International Atomic Energy Agency program for eight Latin American and nine Asian Countries. Established strategies and some results are detailed in this writing
Yannis, George; Weijermars, Wendy; Gitelman, Victoria; Vis, Martijn; Chaziris, Antonis; Papadimitriou, Eleonora; Azevedo, Carlos Lima
Various road safety performance indicators (SPIs) have been proposed for different road safety research areas, mainly as regards driver behaviour (e.g. seat belt use, alcohol, drugs, etc.) and vehicles (e.g. passive safety); however, no SPIs for the road network and design have been developed. The objective of this research is the development of an SPI for the road network, to be used as a benchmark for cross-region comparisons. The developed SPI essentially makes a comparison of the existing road network to the theoretically required one, defined as one which meets some minimum requirements with respect to road safety. This paper presents a theoretical concept for the determination of this SPI as well as a translation of this theory into a practical method. Also, the method is applied in a number of pilot countries namely the Netherlands, Portugal, Greece and Israel. The results show that the SPI could be efficiently calculated in all countries, despite some differences in the data sources. In general, the calculated overall SPI scores were realistic and ranged from 81 to 94%, with the exception of Greece where the SPI was relatively lower (67%). However, the SPI should be considered as a first attempt to determine the safety level of the road network. The proposed method has some limitations and could be further improved. The paper presents directions for further research to further develop the SPI. Copyright © 2012 Elsevier Ltd. All rights reserved.
Adesiyun, Adewole; Avenoso, Antonio; Dionelis, Kallistratos; Cela, Liljana; Nicodème, Christophe; Goger, Thierry; Polidori, Carlo
The objective of the ECOROADS project is to overcome the barrier established by the formal interpretation of the two Directives 2008/96/EC and 2004/54/EC, which in practice do not allow the same Road Safety Audits/Inspections to be performed inside tunnels. The projects aims at the establishment of a common enhanced approach to road infrastructure and tunnel safety management by using the concepts and criteria of the Directive 2008/96/CE on road infrastructure safety management and the results of related European Commission (EC) funded projects. ECOROADS has already implemented an analysis of national practices regarding Road Safety Inspections (RSI), two Workshops with the stakeholders, and an exchange of best practices between European tunnel experts and road safety professionals, which led to the definition of common agreed safety procedures. In the second phase of the project, different groups of experts and observers applied the above common procedures by inspecting five European road sections featuring both open roads and tunnels in Belgium, Albania, Germany, Serbia and Former Yugoslav Republic of Macedonia. This paper shows the feedback of the 5 joint safety operations and how they are being used for a set of - recommendations and guidelines for the application of the RSA and RSI concepts within the tunnel safety operations.
Gonzalez Anez, Francisco; Agueero Agueero, Jorge
The continuous evolution and improvement of safety-related processes has included the analysis, design and development of training plans for the qualification of maintenance nuclear power plant personnel. In this respect, the international references in this area recommend the establishment of systematic qualification programmes for personnel performing functions or carrying out safety related tasks. Maintenance personnel qualification processes have improved significantly, and training plans have been designed and developed based on Systematic Approach to Training methodology to each job position. These improvements have been clearly reflected in recent training programmes with new training material and training facilities focused not only on developing technical knowledge and skills but also on improving attitudes and safety culture. The objectives of maintenance training facilities such as laboratories, mock-ups real an virtual, hydraulic loops, field simulators and other training material to be used in the maintenance training centre are to cover training necessities for initial and continuous qualification. Evidently, all these improvements made in the qualification of plant personnel should be extended to include supplemental personnel (external or contracted) performing safety-related tasks. The supplemental personnel constitute a very spread group, covering the performance of multiple activities entailing different levels of responsibility. Some of these activities are performed permanently at the plant, while others are occasional or sporadic. In order to establish qualification requirements for these supplemental workers, it is recommended to establish a rigorous analysis of job positions and tasks. The objective will be to identify the qualification requirements to assure competence and safety. (authors)
The 9th International Conference on CANDU Maintenance was held in Toronto, Ontario, Canada on December 4-6, 2011. The conference focused on Nuclear plant reliability and maintenance. Equipment reliability is a critical factor in achieving safe and reliable Nuclear Power Plant operations for many reasons. For one it reduces the challenges upon the operating staff and allows station personnel to 'go on the offence' instead of having to play defense in a reactive mode. Plant reliability ensures that there is time to study the issues in detail and develop solutions for long-term success. Let us not forget that the owner carries the burden of demonstrating the return on investment, and plant reliability goes a long way in helping to make the case for plant life extension. A good reputation for plant reliability provides the public capital necessary to build confidence and facilitate the licensing process. The proceedings papers and presentations given at the 9th International Conference on Candu Maintenance covered topics that include: Managing Worker; Radiation Dose; Full Life Cycle Management; Managing Maintenance Refurbishment; Designing for Maintainability; Inspection Techniques; and, Mitigating Degradation.
Brown, T.G.; Casini, G.; Churakov, G.F.
The INTOR engineering design has been strongly influenced by considerations for assembly and maintenance. A maintenance philosophy was established at the outset of the conceptual design to insure that the tokamak configuration would be developed to accommodate maintenance requirements. The main features of the INTOR design are summarized in this paper with primary emphasis on the impact of maintenance considerations. The most apparent configuration design feature is the access provided for torus maintenance. Particular attention was given to the size and location of superconducting magnets and the location of vacuum boundaries. All of the poloidal field (PF) coils are placed outside of the bore of the toroidal field (TF) coils and located above and below an access opening between adjacent TF coils through which torus sectors are removed. A magnet structural configuration consisting of mechanically attached reinforcing members has been designed which facilitates the open access space for torus sector removal. For impurity control, a single null poloidal divertor was selected over a double null design in order to maintain sufficient access for pumping and maintenance of the collector. A double null divertor was found to severely limit access to the torus with the addition of divertor collectors and pumping at the top. For this reason, a single null concept was selected in spite of the more difficult design problems associated with the required asymmetric PF system and higher particle loadings
Burtraw, D.; Harrison, K.; Pawlowski, J.A.
Heavy trucks are primarily responsible for pavement damage to the nation's highways. In this paper we evaluate the pavement damage caused by coal trucks. We analyze the chief source of pavement damage (vehicle weight per axle, not total vehicle weight) and the chief cost involved (the periodic overlay that is required when a road's surface becomes worn). This analysis is presented in two stages. In the first section we present a synopsis of current economic theory including simple versions of the formulas that can be: used to calculate costs of pavement wear. In the second section we apply this theory to a specific example proximate to the reference environment for the Fuel Cycle Study in New Mexico in order to provide a numerical measure of the magnitude of the costs
On the 23 and 25 September come and test your driving skills and your reflexes on the two days of road safety in practice! To conclude the poster and article campaign on this topic which started last year, CERN now comes to the practical part with demonstrations, like a spectacular overturning test, information stands, where you can meet safety personnel from France, Switzerland and CERN, and discussions & debates. Come to ... ... the Meyrin site on 23 September: - From 8:30 hrs, stands and demonstrations on the parking site Cèdres, behind the Restaurant no. 1. - From 9:30 hrs, discussions and debates in the main auditorium. ... the Prévessin site on 25 September: - From 8:30 hrs, stands and demonstrations on the parking site of the building 866. - From 14:00 hrs, discussions and debates in the AB auditorium, building 864.
Goudswaard, A.; Kuipsers, B.; Schoenmaker, N.; Houtman, I.L.D.; Jettinghoff, K.; Ruijs, P.A.J.; Savenije, W.M.; Osinga, D.S.C.; Koomen, M.
On 23 March 2005, Directive 2002/15/EC concerning the organization of working time of persons performing mobile road transport activities came into force for mobile workers. Self-employed are temporally excluded from the scope of this Directive. Firstly, this report describes the implementation of
Worker participation relates to the involvement of workers in the management decision-making processes. In this article attention is focused on worker participation related to occupational safety and health in the Netherlands. Worker participation can refer either to direct or indirect participation by the worker. Indirect participation involves employee representation, while direct participation relates to individual involvement in management’s decision-making processes. In the Framework Dir...
Conclusion: This study can be used as a guideline and a base line to develop a plan of action to prevent traffic accidents. It can also help to prepare formal regulations about a truck driver's vehicle maintenance and driving attitude for a precaution on road accidents.
Jansen, S.; Schmeitz, A.J.C.; Akkermans, L.
TNO and TML performed a study commissioned by the European Commission regarding what measures on a European level can be taken in relation to the use of tyres to improve road safety. The study considers the use of Winter tyres, tread depth requirements, tyre inflation pressure maintenance and tyre
Lee, Hackman Hon Yin; Scott, David
Effective management of building maintenance is a vital ingredient in ensuring a high quality built environment for any building's occupiers. However, maintenance is not high on the list of priorities for most organisations. Communication between top management personnel looking at maintenance issues from a strategic standpoint and maintenance staff considering them at an operational level is often not as good as it should be. When planning maintenance activities maintenance personnel often draw too heavily on their technical experience and expertise without taking sufficient account of wider organisational objectives or consulting effectively with top management. Senior managers also regularly complain about lack of managerial input from maintenance departments. Such barriers contribute to communication difficulties between top management at a strategic level and maintenance personnel at an operational level. Identifying where the key differences lie in senior managers' and maintenance personnel's viewpoints on maintenance strategy can prove invaluable in achieving some convergence of opinions and optimising the efficiency of the overall building maintenance process.
Izumo, Hironobu; Kato, Tomoaki; Kinase, Masami; Torii, Yoshiya; Murayama, Yoji
JRR-3(Japan Research Reactor No.3) has been operated for more than 15 years after the modification, without significant troubles by carrying out maintenance such as the preventive maintenance (mainly time-based maintenance) for the safety-grade equipments and the breakdown maintenance for the non-safety-grade equipments. Unscheduled shutdowns causes by aged non-safety-grade equipments have been increasing, and the resources such as budgets have been decreasing year by year. In this situation, JRR-3 maintenance program was reviewed about safety, reliability and economic efficiency. This report offers the policy of the maintenance review and the future direction of maintenance programs. (author)
Garbarino, S; Traversa, F; Spigno, F
Public health studies have shown that sleepiness at the wheel and other risks associated with sleep are responsible for 5% to 30% of road accidents, depending on the type of driver and/or road. In industrialized countries one-fifth of all traffic accidents can be ascribed to sleepiness behind the wheel. Sleep disorders and various common acute and chronic medical conditions together with lifestyles, extended work hours and prolonged wakefulness directly or indirectly affect the quality and quantity of one's sleep increasing the number of workers with sleep debt and staggered hours. These conditions may increase the risk of road accidents. Strategies to reduce this risk of both commercial and non-commercial drivers related to sleepiness include reliable diagnosis and treatment of sleep disorders, management of chronobiological conflicts, adequate catch-up sleep, and countermeasures against sleepiness at the wheel. Road transport safety requires the adoption of occupational health measures, including risk assessment, health education, technical-environmental prevention and health surveillance.
Budzynski, Marcin; Jamroz, Kazimierz; Kustra, Wojciech; Michalski, Lech; Gaca, Stanislaw
The objective of road safety infrastructure management is to ensure that when roads are planned, designed, built and used road risks can be identified, assessed and mitigated. Road transport safety is significantly less developed than that of rail, water and air transport. The average individual risk of being a fatality in relation to the distance covered is thirty times higher in road transport that in the other modes. This is mainly because the different modes have a different approach to safety management and to the use of risk management methods and tools. In recent years Poland has had one of the European Union’s highest road death numbers. In 2016 there were 3026 fatalities on Polish roads with 40,766 injuries. Protecting road users from the risk of injury and death should be given top priority. While Poland’s national and regional road safety programmes address this problem and are instrumental in systematically reducing the number of casualties, the effects are far from the expectations. Modern approaches to safety focus on three integrated elements: infrastructure measures, safety management and safety culture. Due to its complexity, the process of road safety management requires modern tools to help with identifying road user risks, assess and evaluate the safety of road infrastructure and select effective measures to improve road safety. One possible tool for tackling this problem is the risk-based method for road infrastructure safety management. European Union Directive 2008/96/EC regulates and proposes a list of tools for managing road infrastructure safety. Road safety tools look at two criteria: the life cycle of a road structure and the process of risk management. Risk can be minimized through the application of the proposed interventions during design process as reasonable. The proposed methods of risk management bring together two stages: risk assessment and risk response occurring within the analyzed road structure (road network, road
From - To) 07/20/2017 Final Technical Report 03/19/2014 to 03/31/2017 4. TITLE AND SUBTITLE Sa. CONTRACT NUMBER Ship Operations, Maintenance , Repair...NUMBER Office of Research Services 2440 Campus Road , Box 368 Honolulu, Hawai’i 96822-2234 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10...Office of Naval Research. 15. SUBJECT TERMS Research vessel, operation, maintenance , repair. 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF a
Mansuri, Farah A.; Al-Zalabani, Abdulmohsen H.; Zalat, Marwa M.; Qabshawi, Reem I.
Objectives: To identify the changing trends and crucial preventive approaches to road traffic accidents (RTAs) adopted in the Kingdom of Saudi Arabia (KSA) over the last 2.5 decades, and to analyze aspects previously overlooked. Methods: This systematic review was based on evidence of RTAs in KSA. All articles published during the last 25 years on road traffic accident in KSA were analyzed. This study was carried out from December 2013 to May 2014 in the Department of Family and Community Med...
Life Management is based on the detection, monitoring and control of long-term degradation that affects individual plant components and important populations. Experience has shown that in many cases current maintenance practices do not attend to ageing directly; instead they deal with the consequences when it is already too late, when good Life Management is no longer practical. This has brought about the need for specific Maintenance Evaluation and Improvement Programmes to adjust to the basic objective of Life Management which is to project against, monitor and mitigate ageing that can affect the safe and profitable operating life of the facility. New regulatory requirements for ageing monitoring and effective maintenance to ensure safety (Maintenance Rule) have made it even more necessary to implement the Maintenance Evaluation Programme to cope with ageing, and to integrate that tasks in both programmes to optimise effort and use of tools. This paper presents a brief description of the objectives and methodologies of these Programmes which has been applied to plants around the world and in Spain at the Garona and Vandellos II plants in Spain as part of the PIE project for developing a Remanent Life Evaluation System for nuclear power plants. (Author)
Pourcho, John Bryan
Current aviation maintenance work instructions do not display information effectively enough to prevent costly errors and safety concerns. Aircraft are complex assemblies of highly interrelated components that confound troubleshooting and can make the maintenance procedure difficult (Drury & Gramopadhye, 2001). The sophisticated nature of aircraft maintenance necessitates a revolutionized training intervention for aviation maintenance technicians (United States General Accounting Office, 2003). Quite simply, the paper based job task cards fall short of offering rapid access to technical data and the system or component visualization necessary for working on complex integrated aircraft systems. Possible solutions to this problem include upgraded standards for paper based task cards and the use of integrated 3D product definition used on various mobile platforms (Ropp, Thomas, Lee, Broyles, Lewin, Andreychek, & Nicol, 2013). Previous studies have shown that incorporation of 3D graphics in work instructions allow the user to more efficiently and accurately interpret maintenance information (Jackson & Batstone, 2008). For aircraft maintenance workers, the use of mobile 3D model-based task cards could make current paper task card standards obsolete with their ability to deliver relevant, synchronized information to and from the hangar. Unlike previous versions of 3D model-based definition task cards and paper task cards, which are currently used in the maintenance industry, 3D model based definition task cards have the potential to be more mobile and accessible. Utilizing augmented reality applications on mobile devices to seamlessly deliver 3D product definition on mobile devices could increase the efficiency, accuracy, and reduce the mental workload for technicians when performing maintenance tasks (Macchiarella, 2004). This proposal will serve as a literary review of the aviation maintenance industry, the spatial ability of maintenance technicians, and benefits of
Pawsey, M. R.
Australian methods and formulas for funding building maintenance and management are outlined and found to be haphazard. Discussed are: ultimate costs of deferred maintenance, major plant replacements, life cycle costing, types of maintenance programs (including full preventive maintenance), use of computer programs for planning, and organization…
Rosso, G L; Zanelli, R; Corino, P; Bruno, S
Every year many traffic accidents with fatal outcomes occur in our Country. According to the recent indications of the European Agency for Safety and Health at Work, the Piedmont region has financed the plan: Prevention of road accidents in the road haulage field. The aims of the plan are to stimulate transport companies to the target of road safety and to improve and enforce sanitary surveillance, in order to improve the safety on road haulage and to prevent traffic injuries. the plan foresees, over a period of two years, a few encounters with all the interested parties (companies, police forces, labour unions etc). During those encounters we have to give a questionnaire for evaluating the companies' knowledge about the problem and we have to choose a common plan with the aim of improving road safety. The Piedmont regional plan recalls the need to increase the attention to numerous and diversified hazards for safety on road haulage. It also imposes the choice of measures that include: risk assessment, health education, technical and environmental prevention, sanitary surveillance and clinical interventions (diagnosis and rehabilitation of occupational accidents).
Full Text Available A new road network selection method based on hierarchical structure is studied. Firstly, road network is built as strokes which are then classified into hierarchical collections according to the criteria of betweenness centrality value (BC value. Secondly, the hierarchical structure of the strokes is enhanced using structural characteristic identification technique. Thirdly, the importance calculation model was established according to the relationships among the hierarchical structure of the strokes. Finally, the importance values of strokes are got supported with the model's hierarchical calculation, and with which the road network is selected. Tests are done to verify the advantage of this method by comparing it with other common stroke-oriented methods using three kinds of typical road network data. Comparision of the results show that this method had few need to semantic data, and could eliminate the negative influence of edge strokes caused by the criteria of BC value well. So, it is better to maintain the global hierarchical structure of road network, and suitable to meet with the selection of various kinds of road network at the same time.
Zainal Zaffan Farhana
Full Text Available Road accidents are one of the world’s largest public health and injury prevention problems. In Malaysia, the west coast area of Malaysia been stated as the highest motorcycle fatalities and road accidents are one of the factors that cause of death and injuries in this country. The most common fatal accident is between a motorcycle and passenger car. The most of the fatal accidents happened on Federal roads with 44 fatal accidents reported, which is equal to 29%. Lacks of road geometric designs consistency where the drivers make mistakes errors due to the road geometric features causes the accident kept rising in Malaysia. Hence, models are based on operating speed to calculate design consistency of road. The profiles were obtained by continuous speed profile using GPS data. The continuous operating speed profile models were plotted based on operating speed model (85th percentile. The study was conduct at F0023 from km 16 until km 20. The purpose of design consistency is to know the relationship between the operating speed and elements of geometric design on the road. As a result, the integrated design consistency motorcycle and cars along a segment at F0023, the threshold shows poor design quality for motorcycles and cars.
Background The evidence regarding the association between lung cancer and occupational exposure to cement is controversial. This study investigated causes of deaths from cancer of respiratory tract among cement workers. Methods The deaths of the Greek Cement Workers Compensation Scheme were analyzed covering the period 1969-1998. All respiratory, lung, laryngeal and urinary bladder cancer proportionate mortality were calculated for cement production, maintenance, and office workers in the cement industry. Mortality from urinary bladder cancer was used as an indirect indicator of the confounding effect of smoking. Results Mortality from all respiratory cancer was significantly increased in cement production workers (PMR = 1.91; 95% CI 1.54 to 2.33). The proportionate mortality from lung cancer was significantly elevated (PMR = 2.05; 95% CI 1.65 to 2.52). A statistically significant increase in proportionate mortality due to respiratory (PMR = 1.7; 95% CI 1.2 to 2.34). and lung cancer (PMR = 1.67;95% CI = 1.15-2.34) among maintenance workers has been observed. The PMR among the three groups of workers (production, maintenance, office) did differ significantly for lung cancer (p = 0.001), while the PMR for urinary bladder cancer found to be similar among the three groups of cement workers. Conclusion Cement production, and maintenance workers presented increased lung and respiratory cancer proportionate mortality, and this finding probably cannot be explained by the confounding effect of smoking alone. Further research including use of prospective cohort studies is needed in order to establish a causal association between occupational exposure to cement and risk of lung cancer. PMID:22738120
evidence for population-level effects of roads and traffic is already strong enough to merit routine consideration of mitigation of these effects in all road construction and maintenance projects.
Construcción y empleo de los diagramas C-Q. Una vía para minimizar los costos de operación y mantenimiento de los sistemas de bombeo de pozos profundos. // Construction and use of diagrams C-Q. A road to minimize the operating costs and maintenance of the
Full Text Available En el trabajo se plantea la necesidad de establecer un Sistema de Mantenimiento Preventivo porcondición técnica para los pozos profundos de regadío del estado de Cojedes en la RepúblicaBolivariana de Venezuela, debido a que el alto porcentaje de sólidos por unidad de volumen deagua provoca el desgaste acelerado de diferentes elementos de máquinas de las bombas, lo quetrae consigo que se acorte la vida útil de dichas máquinas, así como se incrementen sus costos deoperación. Como resultado de la investigación se hace una propuesta de procedimiento paraconstruir los diagramas C-Q y con su uso poder determinar cuando es necesario realizar elmantenimiento de los pozos y de esa forma evitar las fallas prematuras en las bombas y minimizarlos costos de la operación y mantenimiento del sistema pozo-bomba.Palabras claves: diagnóstico, rapidez de cambio, estado técnico, mantenimiento, parámetros decondición, parámetros de salida.______________________________________________________________________________AbstractThis paper exposes the need of establishing a Preventive Maintenance System, for technicalcondition, for the irrigated artesian wells at Cojedes's state, in the Bolivarian Venezuelan Republic.Due to the high solids percentage per water volume unit, the wear of different hardware elementsof the pumps is accelerated. This fact provokes the shortening of the service life of theaforementioned hardware and consequently the increase in operating costs. As a research resultthis article presents a procedure proposal to construct C-Q diagrams to determine when it will benecessary to accomplish the well maintenance. In that way one can avoid premature faults inpumps and minimize the operation and maintenance costs of the pumping system.Key words: diagnostic, speed of change, technical status, maintenance, parameters of condition,outgoing parameters.
Full Text Available The paper presents factors for assessment of road traffic noise level and possible actions towards the minimization of excessive noise in the roadway neighborhood. Changes of equivalent sound level values were analyzed in relation to traffic intensity, categorization and vehicles speed. In relation to measures reducing noise level in roadway’s surroundings particular attention was given to anti-noise protections and tyre/noise reduction. Acoustic effectiveness of specific solutions was showed based on chosen examples. It was proved that when admissible noise level is slightly exceeded the need for noise barrier use may be replaced by a proper design and maintenance of road pavement or by enforcement of speed limit.
Izquierdo, J.J.; Chauvire, P.; Plessis, L.
Maintenance in the modern commercial reprocessing plants is a subject of the highest priority in order to guarantee availability for the whole life of the plant. The design concept of the UP3 reprocessing plant at La Hague identified several categories of equipment according to their maintenance design principles. Among them, Standard Process Equipment such as pumps, valves, ejectors and filters which need periodic maintenance. These equipment items are designed in removable modular form to avoid the need to disconnect piping. Removal is performed under shielding and without breach of containment through the use of a transfer cask that is connected to the cell containing the equipment to be removed. This transfer cask is called MERC (Mobile Equipment Replacement Cask). Containment is preserved by an air-tight system consisting of coupled doors, with a special connecting gasket. This system can remove and replace failed equipment, without spreading contamination to work areas. (author)
Kammerer, Catherine C.
Journal article about Reliability Centered Maintenance (RCM) methodologies used by United Space Alliance, LLC (USA) in support of the Space Shuttle Program at Kennedy Space Center. The USA Reliability Centered Maintenance program differs from traditional RCM programs because various methodologies are utilized to take advantage of their respective strengths for each application. Based on operational experience, USA has customized the traditional RCM methodology into a streamlined lean logic path and has implemented the use of statistical tools to drive the process. USA RCM has integrated many of the L6S tools into both RCM methodologies. The tools utilized in the Measure, Analyze, and Improve phases of a Lean Six Sigma project lend themselves to application in the RCM process. All USA RCM methodologies meet the requirements defined in SAE JA 1011, Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes. The proposed article explores these methodologies.
Bisio, R.; Hulsund, J. E.; Nilsen, S.
The maintenance of operating procedures in a NPP is a tedious and complicated task. Through the whole life cycle of the procedures they will be dynamic, 'living' documents. Several aspects of the procedure must be considered in a revision process. Pertinent details and attributes of the procedure must be checked. An organizational structure must be created and responsibilities allotted for drafting, revising, reviewing and publishing procedures. Available powerful computer technology provides solutions within document management and computerisation of procedures. These solutions can also support the maintenance of procedures. Not all parts of the procedure life cycle are equally amenable to computerized support. This report looks at the procedure life cycle in todays NPPs and discusses the possibilities associated with introduction of computer technology to assist the maintenance of procedures. (Author)
Full Text Available The South African Road Safety Manual (SARSM) was published in 1999 and includes guidelines on road safety audits (RSA). The development of SARSM was a proactive process for improving the road environment with respect to road safety but was never...
Aarts, L.T. & Davidse, R.J.
In the Netherlands, the Sustainable Safety vision is an important guide in improving road safety. It is considered that the road environment shouldconform to the expectations of road users in order to prevent errors thatcould lead to road crashes. These expectations are based on the characteristics
... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Primary roads. 817.151 Section 817.151 Mineral... roads. Primary roads shall meet the requirements of § 817.150 and the additional requirements of this section. (a) Certification. The construction or reconstruction of primary roads shall be certified in a...
... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Primary roads. 816.151 Section 816.151 Mineral... roads. Primary roads shall meet the requirements of section 816.150 and the additional requirements of this section. (a) Certification. The construction or reconstruction of primary roads shall be certified...
... 25 Indians 1 2010-04-01 2010-04-01 false Roads prohibited. 265.3 Section 265.3 Indians BUREAU OF... ON INDIAN RESERVATIONS § 265.3 Roads prohibited. (a) Within the boundaries of this officially... highways, roads, truck trails, work roads, and all other types of ways constructed to make possible the...
Rich, Jeppe; Nielsen, Otto Anker
-economic analysis of four different proposed road pricing schemes for the Copenhagen area. The purpose was to assess all benefits and costs involved, including impacts on traffic and environment, maintenance and financing costs as well as tax distortion effects. It was concluded that the socio-economic surplus......Road pricing. congestion charging, toll-systems and other road charging instruments are intensively discussed in many countries. Although many partial analyses of the consequences have been published, few overall socio-economic analyses have been carried out. The article presents such a socio...... of the projects depends crucially on the congestion level. With the Current traffic level, road pricing will not yet be socially expedient in Copenhagen. However, if the opening year is postponed to 2015, the two most favourable schemes will turn positive. The analyses also showed that the magnitude of demand...
Earth Data Analysis Center, University of New Mexico — Line attributes denoting all street centerlines in Curry County. Dataset includes all centerlines for all county maintained roads, all state and federal highways,and...
Full Text Available be reduced, the result remains environmentally unsustainable. Low cost but appropriate techniques for upgrading these roads cost-effectively to sealed standards have been implemented in many countries recently. These techniques optimize the use of local...
Mountain roads and trails are proliferating throughout developing Southeast Asia with severe but largely unrecognized long-term consequences related to effects of landslides and surface erosion on communities and downstream resources.
Minnesota Department of Natural Resources — This data set contains roadway centerlines for roads found on the USGS 1:24,000 mapping series. Those roadways that are Interstate, Trunk Highway, or CSAH (county...
Luk, C.H.; Jette, M.A.
The maintenance of a distributed software system in a production environment involves: (1) maintaining software integrity, (2) maintaining and database integrity, (3) adding new features, and (4) adding new systems. These issues will be discussed in general: what they are and how they are handled. This paper will present our experience with a distributed resource management system that accounts for resources consumed, in real-time, on a network of heterogenous computers. The simulated environments to maintain this system will be presented relate to the four maintenance areas.
This lecture precises the method and means developed by EDF to ensure the training of maintenance personnel according to their initial educational background and their experience. The following points are treated: General organization of the training for maintenance personnel in PWR and GCR nuclear power stations and in Creys Malville fast breeder reactor; Basic nuclear training and pedagogical aids developed for this purpose; Specific training and training provided by contractors; complementary training taking into account the operation experience and feedback; Improvement of velocity, competence and safety during shut-down operations by adapted training. (orig.)
The 2013 annual CERN Road Race will be held on Wednesday 18 September at 6.15 p.m. The 5.5 km race takes place over 3 laps of a 1.8 km circuit in the West Area of the Meyrin site, and is open to everyone working at CERN and their families. There are runners of all speeds, with times ranging from under 17 to over 34 minutes, and the race is run on a handicap basis, by staggering the starting times so that (in theory) all runners finish together. Children (< 15 years) have their own race over 1 lap of 1.8 km. As usual, there will be a “best family” challenge (judged on best parent and best child). Trophies are awarded in the usual men’s, women’s and veterans’ categories, and there is a challenge for the best age/performance. Every adult will receive a souvenir prize, financed by a registration fee of 10 CHF. Children enter free (each child will receive a medal). More information, and the online entry form, can be found here.
The 2013 edition of the annual CERN Road Race will be held on Wednesday 18 September at 18.15. The 5.5 km race takes place over 3 laps of a 1.8 km circuit in the West Area of the Meyrin site, and is open to everyone working at CERN and their families. There are runners of all speeds, with times ranging from under 17 to over 34 minutes, and the race is run on a handicap basis, by staggering the starting times so that (in theory) all runners finish together. Children (< 15 years) have their own race over 1 lap of 1.8 km. As usual, there will be a “best family” challenge (judged on best parent + best child). Trophies are awarded in the usual men’s, women’s and veterans’ categories, and there is a challenge for the best age/performance. Every adult will receive a souvenir prize, financed by a registration fee of 10 CHF. Children enter free (each child will receive a medal). More information, and the online entry form, can be found at: htt...
Rytwinski, Trina; Soanes, Kylie; Jaeger, Jochen A.G.; Fahrig, Lenore; Findlay, C.S.; Houlahan, Jeff; Ree, van der Rodney; Grift, van der Edgar A.
Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill). For road planners,
Martins, Mário M. Abreu; Santos, Luís Picado; Freitas, Elisabete F.
The growing awareness by the broader public of the consequences to health and wellbeing due to road noise has led to a growing number of legal requirements being produced to deal with this matter, both in the design of new or assessment of existing infrastructure. In this article the purpose is to make an up-to-date review of existing studies being carried out to deliver models for predicting noise produced from tyre-road contact, taking account of different methodological appr...
Sahoo, S.; Mitra, A.; Kumar, J.; Sahoo, B.
Transportation via Roads should only be used for safely commuting from one place to another. In 2015, when 1.5 Million people, across the Globe started out on a journey, it was meant to be their last. The Global Status Report on Road Safety, 2015, reflected this data from 180 countries as road traffic deaths, worldwide. In India, more than 1.37 Lakh people were victims of road accidents in 2013 alone. That number is more than the number of Indians killed in all the wars put together. With these disturbing facts in mind, we found out some key ambiguities in the Indian Road Traffic Management systems like the non-adaptive nature to fluctuating traffic, pedestrians and motor vehicles not adhering to the traffic norms strictly, to name a few. Introduction of simple systems would greatly erase the effects of this silent epidemic and our Project aims to achieve the same. It would introduce a pair of Barricade systems to cautiously separate the pedestrians and motor vehicles to minimise road mishaps to the extent possible. Exceptional situations like that of an Ambulance or any emergency vehicles will be taken care off by the use of RFID tags to monitor the movement of the Barricades. The varied traffic scenario can be guided properly by using the ADS-B (Automatic Detection System-Broadcast) for monitoring traffic density according to the time and place.
Full Text Available As environmentally clean industry and as the most significantworld industry regarding the number of employees and theimpact on the social and economic development of a countTy,tourism represents an extremely important social and economicbranch for Croatia.As a functional unit of the mutually interweaving socialand economic relations, tourism is a complex phenomenonwhose development depends on a number of compatible factorsout of which the transport infrastructure is considered to bethe most obvious and almost the most significant one, i.e. thefirst among the equal. This is primarily true for road traffic infrastructure,since road trai!Sportation of tourists by passengercars, buses and motorcycles accounts for more than 90 percentof the overall tourist journeys in Croatia.The topic of this paper is precisely, among other things, thetourist assessment of the Croatian road network by means ofthe so-called econometric model regarding the contribution ofa certain road route to the overall tourist traffic.Practical implementation of the elaborated problematicshould result in the improvement of road infrastructure eitherby constructing new motonvays and/or roads, or by reconstructionand/or modernisation of the existing traffic routes.
Tomasz SZCZURASZEK; Jan KEMPA
The article presents a proposal of the ‘GAMBIT KUJAWSKO-POMORSKI’ Road Safety Improvement Programme. The main idea of the Programme is to establish and initiate systems that will be responsible for the most important areas of activity within road safety, including road safety control, supervision, and management systems in the whole Voivodeship. In total, the creation and start of nine such systems has been proposed, namely: the Road Safety Management, the Integrated Road Rescue Service, the ...
Sokolova, N.; Morrison, A.; Haakonsen, T. A.
Recent advancement of land-based mobile mapping enables rapid and cost-effective collection of highquality road related spatial information. Mobile Mapping Systems (MMS) can provide spatial information with subdecimeter accuracy in nominal operation environments. However, performance in challenging environments such as tunnels is not well characterized. The Norwegian Public Roads Administration (NPRA) manages the country's public road network and its infrastructure, a large segment of which is represented by road tunnels (there are about 1 000 road tunnels in Norway with a combined length of 800 km). In order to adopt mobile mapping technology for streamlining road network and infrastructure management and maintenance tasks, it is important to ensure that the technology is mature enough to meet existing requirements for object positioning accuracy in all types of environments, and provide homogeneous accuracy over the mapping perimeter. This paper presents results of a testing campaign performed within a project funded by the NPRA as a part of SMarter road traffic with Intelligent Transport Systems (ITS) (SMITS) program. The testing campaign objective was performance evaluation of high end commercial MMSs for inventory of public areas, focusing on Global Navigation Satellite System (GNSS) signal degraded environments.
Full Text Available The 26 sample sites in 7 study plots adjacent to asphalt road and earth road in coastal wetland in the Yellow River Delta were selected to quantify plant diversity using quadrat sampling method in plant bloom phase of July and August 2012. The indice of βT and Jaccard’s coefficient were applied to evaluate the species diversity. The results showed that the plant diversities and alien plants were high in the range of 0–20 m to the road verge. There were more exotics and halophytes in plots of asphalt roadside than that of earth roadside. However, proportion of halophytes in habitats of asphalt roadsides was lower than that of earth roadside. By comparing β-diversity, there were more common species in the asphalt roadsides than that in the earth roadsides. The similarity of plant communities in studied plots of asphalt roadsides and earth roadsides increased with increasing the distance to road verge. The effect range of roads for plant diversity in study region was about 20 m to road verge. Our results indicate that the construction and maintenance of roads in wetland could increase the plant species diversities of communities and risk of alien species invasion.
This report is the outcome of a joint research project carried through by an international group of experts. The object was to establish whether current advances in research and practice permit to reduce energy consumption, especially the consumption of petroleum products, by making substitution, either in part or in full, for traditional binders in the construction, maintenance and strengthening of road pavements. The first part deals with bituminous binders, the second part is dedicated to hydraulic binders. As regards the possibility to make substitution for bitumen, the following materials are investigated: coal tar, sulfur, plastics, lignin, and natural rock impregnated with carbohydrates. The modification of the properties of bitumens (through polymers or rubber wastes), the use of emulsions, and the recovery of old road construction materials are dealt with in separate chapters. As regards hydraulic binders, the report investigates cements of low energy content, industrial by-products, and natural materials with hydraulic or pozzolanic properties as well as substandard materials. A separate chapter is dedicated to the possibility of reducing the thickness of the bituminous road cover over road bases with hydraulic binders. The appendix contains detailed energy balances for current road construction materials and pavement constructions. The report is meant to constitute a decision-aid for road authorities and contractors working in the public sector in choosing appropriate road construction materials and techniques on the basis of rational criteria. (orig.)
Li, Yunzhao; Du, Siyao; Han, Guangxuan; Qu, Fanzhu; Wang, Guangmei; Fu, Yuqin; Zhan, Chao
The 26 sample sites in 7 study plots adjacent to asphalt road and earth road in coastal wetland in the Yellow River Delta were selected to quantify plant diversity using quadrat sampling method in plant bloom phase of July and August 2012. The indice of β T and Jaccard's coefficient were applied to evaluate the species diversity. The results showed that the plant diversities and alien plants were high in the range of 0–20 m to the road verge. There were more exotics and halophytes in plots of asphalt roadside than that of earth roadside. However, proportion of halophytes in habitats of asphalt roadsides was lower than that of earth roadside. By comparing β-diversity, there were more common species in the asphalt roadsides than that in the earth roadsides. The similarity of plant communities in studied plots of asphalt roadsides and earth roadsides increased with increasing the distance to road verge. The effect range of roads for plant diversity in study region was about 20 m to road verge. Our results indicate that the construction and maintenance of roads in wetland could increase the plant species diversities of communities and risk of alien species invasion. PMID:25147872
Amr A. Elhadidy
Full Text Available Road network expansion in Egypt is considered as a vital issue for the development of the country. This is done while upgrading current road networks to increase the safety and efficiency. A pavement management system (PMS is a set of tools or methods that assist decision makers in finding optimum strategies for providing and maintaining pavements in a serviceable condition over a given period of time. A multi-objective optimization problem for pavement maintenance and rehabilitation strategies on network level is discussed in this paper. A two-objective optimization model considers minimum action costs and maximum condition for used road network. In the proposed approach, Markov-chain models are used for predicting the performance of road pavement and to calculate the expected decline at different periods of time. A genetic-algorithm-based procedure is developed for solving the multi-objective optimization problem. The model searched for the optimum maintenance actions at adequate time to be implemented on an appropriate pavement. Based on the computing results, the Pareto optimal solutions of the two-objective optimization functions are obtained. From the optimal solutions represented by cost and condition, a decision maker can easily obtain the information of the maintenance and rehabilitation planning with minimum action costs and maximum condition. The developed model has been implemented on a network of roads and showed its ability to derive the optimal solution.
Martin, R.S.; Austin, D.G.
The design of today's nuclear generating plants involves many detailed design considerations. This includes comprehensive look at aging effects on plant components over their expected lifetimes. This is important to ensuring that the plant operates safely throughout its life. The effects of aging are required to be documented in detail in today's designs. This documentation provides assurance that safe operating conditions are maintained throughout the station life cycle. This requirement is analogous to the longer standing requirement to ensure pressure boundary integrity. The pressure boundary integrity requirement has existed in the industry since its inception. The subject of plant aging effects and the maintenance of functionality is known as Environmental Qualification (EQ). This paper will attempt to explain the wisdom of EQ and the potential for optimizing maintenance activities (to move from reactive to proactive activities), within the context of the overall maintenance program. It is the author's intent to encourage the active involvement of maintenance professionals in the effective implementation of the ongoing EQ program so that the benefits are maximized
variable Z; P-6 BIBLIOGRAPHY Argentine Air Force. Reglamento de Conduction Logistica RAC 9 (Logistics Management Regulation). Estado Mayor General de ...other hand, too many resources are expensive to acquire and maintain and difficult to transport . 1-1 Sizing the means needed to accomplish its...functional areas (maintenance, supply/inventory, transportation , etc), methodologies of operations research (simulation, mathematical programming
The traditional approach to preventive maintenance (PM) is based on adherence to manufacturers's requirements and recommended frequencies. When equipment fails, either new procedures are established or the frequency is increased. This leads to an increase in the number of PM activities, overloading not only maintenance resources, but support as well. There is no correlation between more PM and an increase in equipment reliability. More PM may actually induce failures. Reliability-centered maintenance, a new concept in utility maintenance, is based on identifying system/subsystem functions, failures, and dominant failure modes to develop or revise PM tasks. The activities described in this paper are based on actual implementation of this concept on an ongoing project to upgrade the PM program at one of the largest electric utilities in the country. Optimum PM activities are those that, when implemented, will minimize factors that c cause equipment to fail. One technique described illustrates how equipment performance, failure modes, and causes can be related to minimize the occurrence of failures. Operating history and service life of a component are key factors in determining the most effective PM activities, provided that the factors are related to failure modes and causes
Post Office Dept., Washington, DC.
Guidelines, methods and policies regarding the care and maintenance of post office building floors are overviewed in this handbook. Procedures outlined are concerned with maintaining a required level of appearance without wasting manpower. Flooring types and characteristics and the particular cleaning requirements of each type are given along with…
Flooring for institutional, commercial, and industrial use is described with regard to its selection, care, and maintenance. The following flooring and subflooring material categories are discussed--(1) resilient floor coverings, (2) carpeting, (3) masonry floors, (4) wood floors, and (5) "formed-in-place floors". The properties, problems,…
Campbell, J.J.; Zimmerman, C.M.
This paper describes a systematic approach to upgrading nuclear power plant maintenance procedures. The approach consists of four phases: diagnosis, program planning, program implementation, and program evaluation. Each phase is explained as a series of steps to ensure that all factors in a procedure upgrade program are considered
Equipment that is often unique, machines that are as old as the Laboratory, continuous and demanding performance requirements: these are the challenges faced by CERN’s accelerator maintenance teams. There are some twenty such teams, attached to different departments. A new project aims to standardise their procedures to make their work easier, and you can be a part of it. “For the past year or so, the Accelerator and Technologies Sector and the GS Department have been working together on identifying the needs of the different teams that perform maintenance on CERN’s equipment. We are now ready to provide computer support with detailed specifics about the processes that need to be set up,” explains Goran Perinić, one of the leaders in CERN’s new Maintenance Management project (MMP). Since the LHC entered operation, the responsibilities of the technical teams have been broadened to cover maintenance of the collider and that of its injectors...
railway infrastructure manager (InfraMan), whichis subcontracting maintenance tasks to other companies. InfraMan has implemented various central elements in managing their subcontractors. The latter are required to present a safety plan as part of their bid, they must be approved if they are to be awarded...
PARA 2 -104)) 44: (( JETCAL ANALYSIS SHOWS SYSTEM READS CORRECT) (REPLACE FAULTY PARTS)) 45: ((OVERTEMP EXCEEDED SERVICE LIMITS) 46: I(ENGINE CONTROL...CIRCUITS WITHIN LIMITS ON JETCAL ) (REPLACE FAULTY PARTS)) 47: (ADJUST EST AT AMPLIFIER AND CHECK TENP)) (SEND ENGINE TO HIGHER LEVEL MAINTENANCE)) 48: 2
Urgent maintenance work on CERN telephone exchanges will be performed on 24 March from 6 a.m. to 8 a.m. Telephone services may be disrupted or even interrupted during this time. For more details, please contact us by email at Standard.Telephone@cern.ch.
Washington TRU Solutions
This procedure provides instructions for performing inner containment vessel (ICV) and outer containment vessel (OCV) maintenance and periodic leakage rate testing on the following packaging seals and corresponding seal surfaces using a nondestructive helium (He) leak test. In addition, this procedure provides instructions for performing ICV and OCV structural pressure tests
Ballard, J. Barry; Burdette, Clarence E.
Presents two viewpoints on the question of using funding from the Vocational Education Act to maintain ongoing vocational programs. Ballard argues that programs have improved qualitatively because of additional program improvement monies, whereas Burdette argues that the ban on using funds for maintenance treats some states unfairly. (CH)
Fischer, Joseph; Messier, Joseph
Building maintenance is a basic two-year trade education course requiring 2 1/2 hours of study on each of 160 teaching days per year. Student abilities should range from those capable of the simplest custodial work to those who may eventually be superintendents of building complexes. The syllabus is organized in sections by traditional skills…
Description of the main regulations concerning the processes tied with maintenance and in service supervision of the pressure vessels in classical or nuclear power plants or of their accessories (essentially in order to fix the time-table of the hydraulic test procedures and the inspection chronology [fr
Majority of the existing gravel roads have low bearing capacity during spring and autumn, due to thaw and/or rain. Low bearing capacity leads often to bad road conditions. This situation results in higher costs for the lumber industry and the public. Management of gravel roads all the year around would traditionally require excavation of frost susceptible soils and replacement with natural materials. Fly ash (from bio fuels) has good technical properties as bearing layer in road constructions. Fly ash stabilised gravel roads have better function and longer life span with less maintenance than traditional gravel roads. The aim of this project is to show how fly ash stabilisation of gravel roads can increase bearing capacity and what its environmental impact is. The overall aim is to make it easier for entrepreneurs and consulting companies to use fly ash during gravel road renovation and/or constructing new gravel roads. This report targets fly ash producers and road constructors as well as environmental agencies. Two different pilot tests were investigated in this study, Norberg with fly ash from Stora Enso Fors AB, and Boerje (Uppsala) with fly ash from Vattenfall Uppsala AB. Both road sections with related reference section were investigated during a two year period. Only fly ash was used in the bearing layer at Norberg and fly ash gravel was used at Boerje. Bearing capacity was investigated twice, for both locations, November 2003 one month after the road renovation and during thawing, April 2004. Water samples from lysimeters, ground water and surface water were only collected and analysed from Norberg. Experience from the fly ash stabilised road sections show that curing and traffic load can with time compensate for less compaction. The same is noticed at Boerje, although deflection measurements show that there are small differences. Stabilisation of gravel roads increases the roads bearing capacity. Two years after stabilisation 90 timber loads were
van Zyl, GD
Full Text Available signs 6-7 6.9 Road markings 6-11 6.10 Delineation 6-11 6.11 References 6·12 '~ CHAPTER 7: SAFETY ASPECTS 7.1 Introduction 7-1 7.2 Design and construction 7-2 7.3 Maintenance and rehabilitation 7-9 7.4 Legal aspects 7-11 7.5 References 7... The major comment on Chapter3 : Geometric D.::sign relates to the philosophy adopted namely where it is proposed thai the operating speed approaches the design speed against the existing practice where there is a marked difference between the two speeds...
Spangenberg, S.; Baarts, C.; Dyreborg, J.
of injury risk factors at group and individual level for Danish and Swedish workers. LTI-rates and injury risk factors were compared for Danish and Swedish workers during the construction of the combined rail and road link across the 16-km wide sound, Oresund, between Denmark and Sweden. The comparison...... showed that the LTI-rate of the Danish construction workers was approximately fourfold the LTI-rate of the Swedish construction workers. Factors at the micro-level (group and individual level) e.g. differences in education and experience, training and learning, and attitude were important...
Zimmerman, Karen; Jinadasa, Deepani; Maegga, Bertha; Guerrero, Alejandro
Road traffic injuries (RTIs) are a major public health burden, especially in low- and middle-income countries. There is limited data on RTIs in low-volume, rural African settings. This study attempted to survey all individuals living in households within 200 m of two low-volume rural roads in Tanzania and to collect data on RTIs. Local communities and users of the Bago to Talawanda road (intervention site) and Kikaro to Mihuga road (control site) were targeted and received an intensive program of road safety measures tailored using the crash characteristics of the baseline sample. Demographic data on all household members were collected, and those individuals who suffered an RTI in the previous 3 months had comprehensive information collected about the crash characteristics and the socioeconomic impact. The follow-up data collection occurred nine months after the baseline data were collected. The majority of crashes that caused an RTI involved a motorcycle (71%) and the majority of victims were male (82%) with an average age of 27. Injuries to the legs (55%) were most common and the average length of time away from normal activity was 27 (±33) days. RTI incidence at the intervention site increased during the course of the study (incidence before vs. incidence after) and was unchanged in the community control (incidence before vs. incidence after). The incidence of RTIs in the low-volume rural setting is unacceptably high and most commonly associated with motorcycles. The change in incidence is unreliable due to logistic restraints of the project and more research is needed to quantify the impact of various RTI prevention strategies in this setting. This study provides insight into road traffic injuries on low-volume rural roads, areas where very little research has been captured. Additionally, it provides a replicable study design for those interested in collecting similar data on low-volume rural roads.
Full Text Available Background: Sustainable development is about reaching a balance between economic, social, and environmental goals, as well as people's participation in the planning process in order to gain their input and support. For a company, sustainable development means adoption of such business strategy and actions that contribute to satisfying present needs of company and stakeholders, as well as simultaneous protection, maintenance and strengthening of human and environmental potential which will be needed in the future. This new approach forces manufacturing companies to change their previous management paradigms. New management paradigm should include new issues and develop innovative methods, practices and technologies striving for solving problem of shortages of resources, softening environment overload and enabling development of environment-friendly lifecycle of products. Hence, its realization requires updating existing production models as they are based on previously accepted paradigm of unlimited resources and unlimited regeneration capabilities. Maintenance plays a crucial role because of its impact on availability, reliability, quality and life cycle cost, thus it should be one of the main pillars of new business running model. Material and methods: The following paper is a result of research on the literature and observation of practices undertaken by a company within maintenance area. Results and conclusions: The main message is that considering sustainable manufacturing requires considerable expanding range of analysis and focusing on supporting processes. Maintenance offers numerous opportunities of decreasing influence of business processes on natural environment and more efficient resources utilization. The goal of maintenance processes realizing sustainable development strategy is increased profitability of exploitation and optimization of total lifecycle cost without disturbing safety and environmental issues.
The maintenance of systems, structures and components in nuclear power plants (NPPs) plays an important role in assuring their safe and reliable operation. Worldwide, NPP maintenance managers are seeking to reduce overall maintenance costs while maintaining or improving the levels of safety and reliability. Thus, the issue of NPP maintenance is one of the most challenging aspects of nuclear power generation. There is a direct relation between safety and maintenance. While maintenance alone (apart from modifications) will not make a plant safer than its original design, deficient maintenance may result in either an increased number of transients and challenges to safety systems or reduced reliability and availability of safety systems. The confidence that NPP structures, systems and components will function as designed is ultimately based on programmes which monitor both their reliability and availability to perform their intended safety function. Because of this, approaches to monitor the effectiveness of maintenance are also necessary. An effective maintenance programme ensures that there is a balance between the improvement in component reliability to be achieved and the loss of component function due to maintenance downtime. This implies that the safety level of an NPP should not be adversely affected by maintenance performed during operation. The nuclear industry widely acknowledges the importance of maintenance in NPP safety and operation and therefore devotes great efforts to develop techniques, methods and tools to aid in maintenance planning, follow-up and optimization, and in assuring the effectiveness of maintenance
Mansuri, Farah A.; Al-Zalabani, Abdulmohsen H.; Zalat, Marwa M.; Qabshawi, Reem I.
Objectives: To identify the changing trends and crucial preventive approaches to road traffic accidents (RTAs) adopted in the Kingdom of Saudi Arabia (KSA) over the last 2.5 decades, and to analyze aspects previously overlooked. Methods: This systematic review was based on evidence of RTAs in KSA. All articles published during the last 25 years on road traffic accident in KSA were analyzed. This study was carried out from December 2013 to May 2014 in the Department of Family and Community Medicine, Taibah University, Al-Madinah Al-Munawwarah, KSA. Results: Road traffic accidents accounted for 83.4% of all trauma admissions in 1984-1989, and no such overall trend was studied thereafter. The most frequently injured body regions as reported in the latest studies were head and neck, followed by upper and lower extremities, which was found to be opposite to that of the studies reported earlier. Hospital data showed an 8% non-significant increase in road accident mortalities in contrast to police records of a 27% significant reduction during the years 2005-2010. Excessive speeding was the most common cause reported in all recent and past studies. Conclusion: Disparity was common in the type of reporting of RTAs, outcome measures, and possible causes over a period of 2.5 decade. All research exclusively looked into the drivers’ faults. A sentinel surveillance of road crashes should be kept in place in the secondary and tertiary care hospitals for all regions of KSA. PMID:25828277
Roldan Vilches, J.; Moreno Matarranz, M. A.; Hermana Mendioroz, I.
Cofrentes NPP has begun in 1997 activities related to At Power Preventive Maintenance over trains or systems which lead to a voluntary entry in a Limitative Condition of Operation (LCO) of the Technical Specifications. From others benefits, this program ha improved the risk management and the staff's knowledge over the functions and safety implications of the different systems, the better exploit of the resources, the co-ordination of the different organisations involved (Maintenance an Operation) and the reductions of works during shutdowns. Previous to each work, a feasibility study analyzes qualitative and quantitative (PSA), using the Risk Monitor, the implications on safety of all the tasks, assuring that the global safety of the Plant is always maintained. Tech. Spec. are analyzed in detail and also are analyzed situations of simultaneous unavailabilities of systems which could lead to a high risk situation. Two different risk controls are defined (punctual and accumulated) to assure that high risk situations will not be given. Finally, historical risk profile is analyzed to assure that the accumulated risk increase is not significant. Risk Monitor helps staff in the schedule and follow-up of the activities of On-Line Maintenance. Each one of the tasks are deeply planned and harshly analyzed and are carried out by high qualified workers. By the moment, this program is running with fully satisfaction on the Plant. (Author)
Rytwinski, Trina; Soanes, Kylie; Jaeger, Jochen A. G.; Fahrig, Lenore; Findlay, C. Scott; Houlahan, Jeff; van der Ree, Rodney; van der Grift, Edgar A
Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill). For road planners, deciding on what mitigation method to use has been problematic because there is little good information about the relative effectiveness of these measures in reducing road-kill, and the costs of these...
Samardžija, Dragan; Teslić, Nikola; Todorović, Branislav M.; Kovač, Erne; Isailović, Đorđe; Miladinović, Bojan
Driving in low visibility conditions (night time, fog or heavy precipitation) is particularly challenging task with an increased probability of traffic accidents and possible injuries. Road Nail is a solar powered intelligent road marking system of wirelessly networked signaling devices that improve driver safety in low visibility conditions along hazardous roadways. Nails or signaling devices are autonomous nodes with capability to accumulate energy, exchange wireless messages, detect approaching vehicles and emit signalization light. We have built an experimental test-bed that consists of 20 nodes and a cellular gateway. Implementation details of the above system, including extensive measurements and performance evaluations in realistic field deployments are presented. A novel distributed network topology discovery scheme is proposed which integrates both sensor and wireless communication aspects, where nodes act autonomously. Finally, integration of the Road Nail system with the cellular network and the Internet is described.
Kornilov, A.N.; Ryabchikov, S.G.
Experimental investigations on radiation hygienic assessment of the possibilities of using rocks with an increased content of natural radionuclides (NRN) are carried out. At experimental road portions constructed using such rocks, γ-radiation levels have been measured and radioactive contamination of the ad-- jacent territory has been determined. The danger presented by such roads for highway engineering workers and population also has been assessed. The results obtained permit to express a possitive opinion on the use of solid wastes with an increased NRN content for construction of roads with asphalt coating. Rocks with specific α-activity 3 Bq/kg are recommended to be used for any types of road construction, whereas wastes with specific α-activity 3 Bq/kg - only for road construction in an industrial zone, between populated areas and for thoroughfares and highways. The use of wastes with a higher NRN content is unreasonable as it leads to a growth of annular dose to population and excessive exposure of construction workers engaged in highway engineering operations
Rachmad Hidayat; Nachnul Ansori; Ali Imron
Maintenance Activity Planning by Reability Centered Maintenance (RCM) II Method. This research discussmaintenance activity by using RCM II method to determine failure function risk at compresor screw. Calculation isgiven to magnitude optimum time maintenance interval by considering the cost maintenance and the cost reparation.From the research results with RPN points out that critical component that needs to get main priority in givemaintenance on compresor screw are bust logistic on timeworn...
Alamgir, Hasanat; Yu, Shicheng; Chavoshi, Negar; Ngan, Karen
This study describes the types, causes, and outcomes of potential irritation and allergy incidents among workers in British Columbia's health care industry. Data on occupation-induced allergy and irritation incidents were extracted from a standardized database using the number of productive hours obtained from payroll data as a denominator during a 1-year period from three British Columbia health regions. Younger workers, female workers, facility support service workers, laboratory assistants and technicians, and maintenance and acute care workers were found to be at higher risk for allergy and irritation incidents. Major causes of allergy and irritation incidents included chemicals, blood and body fluids, food and objects, communicable diseases, air quality, and latex. A larger proportion of chemically induced incidents resulted in first aid care only, whereas non-chemical incidents required more emergency room visits.
Machsus; Prayogo, I.; Chomaedhi; Hayati, D. W.; Utanaka, A.
This research discusses road safety analysis on the operation of frontage road on the west side of Achmad Yani Road Surabaya. This research began by conducting survey on secondary data of traffic accidents. In addition, primary data survey was conducted to obtain traffic data, geometric road data, and other supporting data at the study site along the west side frontage of Ahmad Yani Road Surabaya. Devices used in this research include camera, handy cam, speed gun, counters of vehicles, rolling meter, computer and others. In outline, the stages to conduct this research are divided into 4 stages, namely 1.the preparation stage, 2.data collection and processing, 3. analysis and discussion, and 4. conclusion. The results of this study showed that the accident characteristics of the frontage road are (i) 3 accidents occured per month, (ii) motorcycles was accounted for the largest proportion of accidents which amounted to 74.6 percent, (iii) there were 3 accident victims per month, and (iv) material losses per month worths 1.2 million. The accident rate in 2016 was 0.04 crashes per one million vehicle travels per kilometer, while during 2 months in 2017 it was 0.15 accidents per one million vehicle travels per kilometer. Black spot area of accident is located on Sta 2 + 800 to 2 + 900 which is in front of Graha Pena building and DBL Arena. The high rate of accidents is influenced by the speed of the vehicle which 85 percentile exceeds the speed limit of 40km per hour.
Au-Yong Cheong Peng
Full Text Available In high-rise residential buildings, the quality of facilities management services is significant to the normal operation of the facilities. Unfortunately, lack of concern towards building maintenance, especially preventive maintenance, happens in domestic housing industry in Malaysia. Majority of the maintenance operations of condominiums suffer from lack of planning, lack of proactive maintenance plan, and lack of proper implementation. Thus, this paper reviews the implementation of preventive maintenance strategy, routine maintenance in specific. An extensive review of literature published in 1987 to 2014 is performed for the purpose of this research. The publications are sourced from journal articles, conference proceedings and books. The literature analysis confirms that the routine maintenance of facilities and building services is vital and it can be influential towards the maintenance performance. Subsequently, a theoretical framework is developed, which shows the relationship between routine maintenance of building facilities & services and maintenance performance. The building facilities & services are divided into two categories. They are essential facilities & services that ensure the safety, health, habitability, and operability of buildings; while value-added facilities & services deal with property value, return on investment, and quality living of buildings. Based on the findings, a future research is proposed, which aims to identify the appropriate routine of maintenance for the facilities and services in high-rise residential buildings to improve the maintenance performance.
Trenouth, William R.; Gharabaghi, Bahram; Perera, Nandana
Road authorities, who are charged with the task of maintaining safe, driveable road conditions during severe winter storm events are coming under increasing pressure to protect salt vulnerable areas (SVAs). For the purpose of modelling urban winter hydrology, the temperature index method was modified to incorporate ploughing and salting considerations and was calibrated using winter field data from two sites in Southern Ontario and validated using data collected from a section of Highway 401 - Canada's busiest highway. The modified temperature index model (MTIM) accurately predicted salt-induced melt (R2 = 0.98 and 0.99, RMSE = 19.9 and 282.4 m3, CRM = -0.003 and 0.006 for calibration and validation sites respectively), and showed a demonstrable ability to calculate the Bare Pavement Regain Time (BPRT). The BPRT is a key factor on road safety and the basis for many winter maintenance performance standards for different classes of highways. Optimizing salt application rate scenarios can be achieved using the MTIM with only two meteorological forecast inputs for the storm event - readily available on-line through the Road Weather Information System (RWIS) - and can serve as a simple yet effective tool for winter road maintenance practitioners seeking to optimize salt application rates for a given storm event in salt vulnerable areas.
Full Text Available Potholes can generate damage such as flat tire and wheel damage, impact and damage of lower vehicle, vehicle collision, and major accidents. Thus, accurately and quickly detecting potholes is one of the important tasks for determining proper strategies in ITS (Intelligent Transportation System service and road management system. Several efforts have been made for developing a technology which can automatically detect and recognize potholes. In this study, a pothole detection method based on two-dimensional (2D images is proposed for improving the existing method and designing a pothole detection system to be applied to ITS service and road management system. For experiments, 2D road images that were collected by a survey vehicle in Korea were used and the performance of the proposed method was compared with that of the existing method for several conditions such as road, recording, and brightness. The results are promising, and the information extracted using the proposed method can be used, not only in determining the preliminary maintenance for a road management system and in taking immediate action for their repair and maintenance, but also in providing alert information of potholes to drivers as one of ITS services.
Phase II of the Centrifuge Workers Study was a follow-up to the Phase I efforts. The Phase I results had indicated a higher risk than expected among centrifuge workers for developing bladder cancer when compared with the risk in the general population for developing this same type of cancer. However, no specific agent could be identified as the causative agent for these bladder cancers. As the Phase II Report states, Phase I had been limited to workers who had the greatest potential for exposure to substances used in the centrifuge process. Phase II was designed to expand the survey to evaluate the health of all employees who had ever worked in Centrifuge Program Departments 1330-1339 but who had not been interviewed in Phase I. Employees in analytical laboratories and maintenance departments who provided support services for the Centrifuge Program were also included in Phase II. In December 1989, the Oak Ridge Associated Universities (ORAU), now known as Oak Ridge Institute for Science and Education (ORISE), was contracted to conduct a follow-up study (Phase II). Phase H of the Centrifuge Workers Study expanded the survey to include all former centrifuge workers who were not included in Phase I. ORISE was chosen because they had performed the Phase I tasks and summarized the corresponding survey data therefrom.
Phase II of the Centrifuge Workers Study was a follow-up to the Phase I efforts. The Phase I results had indicated a higher risk than expected among centrifuge workers for developing bladder cancer when compared with the risk in the general population for developing this same type of cancer. However, no specific agent could be identified as the causative agent for these bladder cancers. As the Phase II Report states, Phase I had been limited to workers who had the greatest potential for exposure to substances used in the centrifuge process. Phase II was designed to expand the survey to evaluate the health of all employees who had ever worked in Centrifuge Program Departments 1330-1339 but who had not been interviewed in Phase I. Employees in analytical laboratories and maintenance departments who provided support services for the Centrifuge Program were also included in Phase II. In December 1989, the Oak Ridge Associated Universities (ORAU), now known as Oak Ridge Institute for Science and Education (ORISE), was contracted to conduct a follow-up study (Phase II). Phase H of the Centrifuge Workers Study expanded the survey to include all former centrifuge workers who were not included in Phase I. ORISE was chosen because they had performed the Phase I tasks and summarized the corresponding survey data therefrom
Dean, B; Rombos, P [Wardrop (W.L.) and Associates Ltd., Winnipeg, MB (Canada)
Two methodologies for maintenance task selection, Reliability Centre Maintenance (RCM) and Degradation Mode Analysis (DMA), are compared with regard to application in the nuclear industry and potential for application at CANDU nuclear power plants. RCM is the favoured one of the two methodologies. It is more thorough than DMA, is well supported within the US nuclear industry, and - with experience in application - is gaining cost effectiveness. There is interest in the use of RCM in other nations, including France and Japan, and it is already being implemented at Bruce A NGS and Bruce B NGS in Canada. DMA lags behind RCM in development and currently there is little experience to support claims of major benefits at reduced cost. Significant advantages over RCM need to be demonstrated if DMA is to gain acceptance in the nuclear industry. (author). 41 refs., 7 tabs., 8 figs.
The paper describes how the CANDU-3 has incorporated, at the design stage, maintenance requirements such as component accessibility, standardization, ease of replacement, reduction in the number of components, and simplified component design. AECL is also active in the planned rehabilitation of the four units at Ontario Hydro's Bruce A nuclear generating station. In addition to conceptual design and development, detailed design and analysis, procurement and site assistance, AECL's Sheridan Park Laboratory will provide important development and mockup facilities. An AECL research and development program on reactor maintenance includes the identification and characterization of aging and degrading mechanisms, the tailoring of developed products to plant requirements, and the identification of areas of international cooperation and information exchange. 3 tabs., 1 fig
Dean, B.; Rombos, P.
Two methodologies for maintenance task selection, Reliability Centre Maintenance (RCM) and Degradation Mode Analysis (DMA), are compared with regard to application in the nuclear industry and potential for application at CANDU nuclear power plants. RCM is the favoured one of the two methodologies. It is more thorough than DMA, is well supported within the US nuclear industry, and - with experience in application - is gaining cost effectiveness. There is interest in the use of RCM in other nations, including France and Japan, and it is already being implemented at Bruce A NGS and Bruce B NGS in Canada. DMA lags behind RCM in development and currently there is little experience to support claims of major benefits at reduced cost. Significant advantages over RCM need to be demonstrated if DMA is to gain acceptance in the nuclear industry. (author). 41 refs., 7 tabs., 8 figs
Gullett, C. C.
The health maintenance program for commercial flight crew personnel includes diet, weight control, and exercise to prevent heart disease development and disability grounding. The very high correlation between hypertension and overweight in cardiovascular diseases significantly influences the prognosis for a coronary prone individual and results in a high rejection rate of active military pilots applying for civilian jobs. In addition to physical fitness the major items stressed in pilot selection are: emotional maturity, glucose tolerance, and family health history.
Pasman, W.J.; Saris, W.H.M.; Westerterp-Plantenga, M.S.
Objective: To obtain predictors of weight maintenance after a weight-loss intervention. Research Methods and Procedures: An overall analysis of data from two-long intervention studies [n = 67 women; age: 37.9±1.0 years; body weight (BW): 87.0±1.2 kg; body mass index: 32.1±0.5 kg·m-2; % body fat:
Maintenance is an important economic activity, it can represent up to 40% of operating costs in some fabrication units. The opening of energy markets to competition has led main operators to center their activities on their basis business and to sub-contract subsidiary activities. Subcontracting with strong engagements from the sub-contractor about results, time allowed and costs is now currently applied in nuclear industry. (A.C.)
The evolution of the computer has and continues to have a great impact on industry. We are in an adjustment cycle with the current computer evolution, and will need to adapt to make the changes for the coming decade. Hardware and software are continually being enhanced. Computers are becoming more powerful and will eventually provide an effective man-machine interface. This paper shares experiences encountered during implementations of computerized maintenance systems
Abdulmajid Ahmed Ali
and a seatbelt. I had to apologize profusely to the young traffic policeman and explain that I was wearing sunglasses because I was driving facing the sun! The reason for wearing the seatbelt was a habit from living abroad for many years and I was not a "show off" as he put it! This incidence made me wonder how much the traffic police knew about the law?• In Libya the way we behave in the street, the way we drive and our attitude towards pedestrians is not taught in schools at an early age. As a matter of fact, many drivers think it is "cool" to scare pedestrians.• Most of the accidents in Libya occur at school times but unfortunately no measures are taken by the traffic police to help young children to cross roads safely.• Most of the road traffic accidents happen at the same areas but these are never identified as "black spots" to warn drivers of the possible dangers.• Although Zebra Crossings exist in some parts of Libya, they actually do not serve the purpose. We just need to count how many pedestrians (especially foreign visitors have been knocked down at Zebra Crossings.• There is a need for new road signs, clear road markings (lanes, and new traffic lights to replace old and often non-functioning ones.• One study demonstrated that speeding was responsible for about 70% of accidents . There are no speed cameras or road humps to slow down speeding cars, therefore residents who have lost children to road traffic accidents resort to building their own version of street humps made from old pipes, thick ropes or cement.• Most of the main roads are full of holes and in desperate need of maintenance.• Car seats for children are not compulsory.• When accidents happen in Libya, what number do we dial? Do emergency services exist?• It is a known fact that most of the deaths and permanent disabilities in road traffic accidents are caused by people trying to help due to the lack of Advanced Trauma and Life Support (ATLS trained personnel [5,6].• It
Murthy, D.N.P.; Karim, M.R.; Ahmadi, A.
Most businesses view maintenance as tasks carried out by technicians and the data collected is mostly cost related. There is a growing trend towards outsourcing of maintenance and the data collection issues are not addressed properly in most maintenance service contracts. Effective maintenance management requires proper data management - data collection and analysis for decision-making. This requires a proper framework and when maintenance is outsourced it raises several issues and challenges. The paper develops a framework for data management when maintenance is outsourced and looks at a real case study that highlights the need for proper data management. - Highlights: • Framework for data management in maintenance outsourcing. • Black-box to grey-box approaches for modelling. • Improvements to maintenance decision-making. • Case study to illustrate the approaches and the shortcomings in data collection
The purpose of this study was to evaluate Virginia's maintenance management system and to recommend modifications directed at improving it. The study revealed that (1) the current system of allocating maintenance monies is based upon centerline milea...
The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D&D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D&D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D&D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project will result in the development of an Advanced Worker Protection System (AWPS). The AWPS will be built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with advanced protective garments, advanced liquid cooling garment, respirator, communications, and support equipment to provide improved worker protection, simplified system, maintenance, and dramatically improve worker productivity through longer duration work cycles.
Kungl, D.; Loesser, D.; Heitzenroeder, P.; Cerdan, G.
TFTR plans to begin D-T experiments in mid 1990. The D-T experimental program will produce approximately one hundred shots, with a neutron generation rate of 10 19 neutrons per shot. This will result in high levels of activation in TFTR, especially in the vacuum vessel. The primary purpose of the Maintenance Manipulator is to provide a means of remotely performing certain defined maintenance and inspection tasks inside the vacuum torus so as to minimize personnel exposure to radiation. The manipulator consists of a six-link folding boom connected to a fixed boom on a movable carriage. The entire manipulator is housed in a vacuum antechamber connected to the vacuum torus, through a port formerly used for a vacuum pumping duct. The configuration extends 180 0 in either direction to provide complete coverage of the torus. The four 3500 l/s turbopumps which were formerly used in the pumping duct will be mounted on the antechamber. The manipulator will utilize two end effectors. The first, called a General Inspection Arm (GIA) provides a movable platform to an inspection camera and an in-vacuum leak detector. The second is a bilateral, force-reflecting pair of slave arms which utilize specially developed tools to perform several maintenance functions. All components except the slave arms are capable of operating in TFTR's vacuum environment and during 150 0 C bakeout of the torus. (orig.)
Zaiss, W.; Reuschle, K.; Baier, B.
The increasingly more expensive maintenance measures, cuts in the cost budget, and the loss of know-how on the part of vendors all require a change of policy with respect to maintenance concepts of the part of operators. This also applies to the existing valve concepts, the drives included. Under these aspects, the current drive, which is self-actuated and actuated by outside media, for a parallel-plate valve of a nomial width of 700 was reconsidered. The effort served to reduce maintenance costs and, at the same time, simplify the drive concept as well as cut back on the number of in-service inspections. Moreover, the number of active components were to be minimized and installation conditions in the plant were to be improved. When the boundary conditions to be observed with respect to process technology had been laid down, the competent technical department developed a concept of modification of the drive. A major constituent part was the demonstration of the functioning capability of the new drive under accident conditions. It was achieved mainly by an analytical approach. In the resultant drive concept, the same control valves are employed to actuate a driving cylinder by means of self-actuation or by an outside medium as a function of pressure. (orig.) [de
Giselle Póvoa Gomes
Full Text Available In implants, maintenance is a decisive factor for obtaining success when implant supported overdentures and dentures are used. The present stud presents, a clinical case of a patient, a 70 year-old white man, with a completely edentulous mandibular alveolar ridge, severe bone resorption with presence of basal bone only, and absence of vestibule. Initially, treatment consisted of the placement of a mandibular overdenture, supported on three implants in the anterior inter-foramen region, as the left implant was transfixed in the basal bone of 2 to 3 millimeters. Eleven years later, another two implants were placed in the anterior area and an immediate load was performed up to the first molars, for the placement of an implant supported fixed. Throughout the entire treatment, meticulous maintenance was carried out, with follow-up for fourteen years, interrupted by the patient’s death. From the third month after the opening the three implants initially placed, the presence of keratinized mucosa, definition of the vestibule, maturation of the alveolar ridge and bone formation in the mento region were observed. It was concluded that good planning, allied to mastery of the technique and adequate maintenance were the prerequisites necessary for obtaining favorable results, success of the present case, and for the patient to have a better quality of life.
Butterworth, G.; Anderson, T.M.
The Westinghouse Nuclear Services Integration Division managed maintenance services are described. Essential to the management and control of a total plant maintenance programme is the development of a comprehensive maintenance specification. During recent years Westinghouse has jointly developed total plant engineering-based maintenance specifications with a number of utilities. The process employed and the experience to date are described. To efficiently implement the maintenance programme Westinghouse has developed a computer software program specifically designed for day to day use at the power plant by maintenance personnel. This program retains an equipment maintenance history, schedules maintenance activities, issues work orders and performs a number of sophisticated analyses of the maintenance backlog and forecast, equipment failure rates, etc. The functions of this software program are described and details of Westinghouse efforts to support the utilities in reducing outage times through development of predefined outage plans for critical report maintenance activities are given. Also described is the experience gained in the training of specialized maintenance personnel, employing competency-based training techniques and equipment mock-ups, and the benefits experienced, in terms of improved quality and productivity of maintenance performed. The success experienced with these methods has caused Westinghouse to expand the use of these training techniques to the more routine skill areas of power plant maintenance. A significant reduction in the operating costs of nuclear power plants will only be brought about by a significant improvement in the quality of maintenance. Westinghouse intends to effect this change by expanding its international service capabilities and to make major investments in order to promote technological developments in the area of power plant maintenance. (author)
1 Department of Mental Health, College of Medical Sciences, University of Maiduguri, Borno State, Nigeria. .... social workers. Similarly, non-clinical staffs were grouped into senior staff of central administration, finance/hospital records, engineering/works & maintenance .... and styles of coping among hospital nurses by.
Korea Industrial Technology Foundation Editorial Department
This book is comprised of two parts. One is divided into five chapters, which deals with summary of environment-friendly coloring technology, industry tendency of environment-friendly coloring technology, industry analysis and vision of environment-friendly coloring technology, analysis on core technology for environment-friendly coloring technology, with eco-friendly water paint and painting skill and eco-friendly surface treatment skill using electrochemical process. The other is divided into five chapters, which handles outline of display printing technology road map market trends of display painting, analysis and vision of display painting deduction of core-technology for display painting and analysis of core-technology for display painting. It has Diagrams for eco-friendly coloring technology road map and core-technology display painting road map.
The purpose of this calculation is to estimate radiation doses received by personnel working in the Aging Facility performing operations to transfer aging casks to the aging pads for thermal and logistical management, stage empty aging casks, and retrieve aging casks from the aging pads for further processing in other site facilities. Doses received by workers due to aging cask surveillance and maintenance operations are also included. The specific scope of work contained in this calculation covers both collective doses and individual worker group doses on an annual basis, and includes the contributions due to external and internal radiation from normal operation. There are no Category 1 event sequences associated with the Aging Facility (BSC 2004 [DIRS 167268], Section 7.2.1). The results of this calculation will be used to support the design of the Aging Facility and to provide occupational dose estimates for the License Application. The calculations contained in this document were developed by Environmental and Nuclear Engineering of the Design and Engineering Organization and are intended solely for the use of the Design and Engineering Organization in its work regarding facility operation. Yucca Mountain Project personnel from the Environmental and Nuclear Engineering should be consulted before use of the calculations for purposes other than those stated herein or use by individuals other than authorized personnel in Environmental and Nuclear Engineering
Zaporotskova Irina Vladimirovna
Full Text Available The requirement of developing and modernizing the roads in Russia and in the Volgograd region in particular, is based on need of expanding the directions of scientific research on road and transport complexes. They have to be aimed at the development of the theory of transport streams, traffic safety increase, and, first of all, at the application of original methods of road development and modernization, introduction of modern technologies and road-building materials.On the basis of the analysis of the plans for transportation sphere development in the Volgograd region assuming the need to apply the new technologies allowing to create qualitative paving, the authors propose the technology of creating a heavy-duty paving with the use of carbon nanomaterial. The knowledge on strengthening the characteristics of carbon nanotubes is a unique material for nanotechnology development which allowed to assume the analysis of general information about asphalt concrete. The analysis showed that carbon nanotubes can be used for improvement of operational characteristics of asphalt concrete, and it is possible to carry out additives of nanotubes in hot as well as in cold bitumen. The article contains the basic principles of creation of the new road material received by means of bitumen reinforcing by carbon nanotubes. The structures received by the offered technique binding on the basis of the bitumens modified by carbon nanomaterial can be used for coverings and bases on highways of all categories in all road and climatic zones of Russia. The technical result consists in increasing the durability and elasticity of the received asphalt covering, and also the increase of water resistance, heat resistance and frost resistance, the expansion of temperature range of its laying in the field of negative temperatures.
Honeywell, Inc., Minneapolis, Minn.
THIS HONEYWELL PAMPHLET DISCUSSES SOME ASPECTS OF PREVENTIVE MAINTENANCE OF AUTOMATIC CONTROLS, HEATING, VENTILATING, AND AIR CONDITIONING, AND COMPARES IN-PLANT WITH CONTRACT SERVICE, CONCLUDING THAT CONTRACT SERVICE IS PREFERABLE AND DESCRIBING A NUMBER OF MAINTENANCE PLANS WHICH THEY FURNISH. PREVENTIVE MAINTENANCE PROVIDES--(1) MORE EFFICIENT…
Louit, Darko; Pascual, Rodrigo [Centro de Mineria, Pontificia Universidad Catolica de Chile, Av. Vicuna MacKenna, 4860 Santiago (Chile); Banjevic, Dragan [Centre for Maintenance Optimization and Reliability Engineering, University of Toronto, 5 King' s College Rd., Toronto, Ontario (Canada)
Many systems require the periodic undertaking of major (preventive) maintenance actions (MMAs) such as overhauls in mechanical equipment, reconditioning of train lines, resurfacing of roads, etc. In the long term, these actions contribute to achieving a lower rate of occurrence of failures, though in many cases they increase the intensity of the failure process shortly after performed, resulting in a non-monotonic trend for failure intensity. Also, in the special case of distributed assets such as communications and energy networks, pipelines, etc., it is likely that the maintenance action takes place sequentially over an extended period of time, implying that different sections of the network underwent the MMAs at different periods. This forces the development of a model based on a relative time scale (i.e. time since last major maintenance event) and the combination of data from different sections of a grid, under a normalization scheme. Additionally, extended maintenance times and sequential execution of the MMAs make it difficult to identify failures occurring before and after the preventive maintenance action. This results in the loss of important information for the characterization of the failure process. A simple model is introduced to determine the optimal MMA interval considering such restrictions. Furthermore, a case study illustrates the optimal tree trimming interval around an electricity distribution network. (author)
J. W. M. Lambert
Full Text Available Costs for maintenance of infrastructure in municipalities with soft soil underground conditions, are estimated to be almost 40 % higher than in others. As a result, these municipalities meet financial problems that cause overdue maintenance. In some cases municipalities are even afraid to be unable to offer a minimum service level in future. In common, traditional practice, roads and sewerage systems have been constructed in trenches that consist of sandy material that replaces the upper meters of the soft soil. Under influence of its weight, this causes accelerated settlements of the construction. A number of alternative constructions have been developed, e.g. using light-weight materials to limit settlement velocity. In order to limit future maintenance costs, improvement of maintenance strategies is desired. Tools have been and will be developed to support municipalities in improving their maintenance strategies and save money by doing that. A model (BALANS that weighs the attractiveness of alternative solutions under different soil, environmental and economic circumstances, will be presented.
V. A. Knyaz
Full Text Available The quality and condition of a road surface is of great importance for convenience and safety of driving. So the investigations of the behaviour of road materials in laboratory conditions and monitoring of existing roads are widely fulfilled for controlling a geometric parameters and detecting defects in the road surface. Photogrammetry as accurate non-contact measuring method provides powerful means for solving different tasks in road surface reconstruction and analysis. The range of dimensions concerned in road surface analysis can have great variation from tenths of millimetre to hundreds meters and more. So a set of techniques is needed to meet all requirements of road parameters estimation. Two photogrammetric techniques for road surface analysis are presented: for accurate measuring of road pavement and for road surface reconstruction based on imagery obtained from unmanned aerial vehicle. The first technique uses photogrammetric system based on structured light for fast and accurate surface 3D reconstruction and it allows analysing the characteristics of road texture and monitoring the pavement behaviour. The second technique provides dense 3D model road suitable for road macro parameters estimation.
Вікторія Василівна ІГНАТЮК
Full Text Available The paper discusses the model and algorithm optimization program of road repair works, with limited funds. Features introduction program for calculating rational level detection repair costs for the period of the program, which allows dos evolve a desired operating condition of the pavement.
Baidya, S.; Borken-Kleefeld, J.
India has become one of the biggest emitters of atmospheric pollutants from the road transportation sector globally. Here we present an up-to-date inventory of the exhaust emissions of ten species. This inventory has been calculated bottom-up from the vehicle mileage, differentiating by seven vehicle categories, four age/technology layers and three fuel types each, for the seven biggest cities as well as for the whole nation. The age composition of the rolling fleet has been carefully modelled, deducting about one quarter of vehicles still registered but actually out-of-service. The vehicle mileage is calibrated to the national fuel consumption which is essential to limit uncertainties. Sensitivity analyses reveal the primary impact of the emission factors and the secondary influence of vehicle mileage and stock composition on total emissions. Emission estimates since 1980 are reviewed and qualified. A more comprehensive inspection and maintenance is essential to limit pollutant emissions; this must properly include commercial vehicles. They are also the most important vehicle category to address when fuel consumption and CO 2 emissions shall be contained. (author)
Pedro Henrique Belavenutti Martins da Silva
Full Text Available In industrial forest plantations, the spatial distribution of management units for harvest scheduling influences the timber production cost and the non-renewable resources consumption, due to issues related to transport logistic. In this context, this research aimed to formulate Integer Linear Programming (ILP by means of the application of Floyd-Warshall network optimization algorithm to generate timber production routes, minimizing the production costs resulting from harvest activities and forest road maintenance. Then, scenarios were simulated considering different minimal harvest ages for Pinus spp. and Eucalyptus spp. stands. The planning horizon was five years with annual periodicity. The study area was 23,330 hectares of forests, located in Paraná state (southern Brazil. We compared the simulated scenarios according to the following parameter indicators: harvest income, building road network and the production unit cost. The decreasing of the minimal harvest age reduces the mean production of management units scheduled to be harvested, in other hand, it requires fewer roads to be built, and consequently increases the production unit cost. The solutions obtained by using ILP models presented an optimality gap lower than 0.1%.
Puteri, V. E.; Yuniaristanto, Hisjam, M.
This paper presents a mathematical modeling to find the optimal manpower allocation in an aircraft line maintenance. This research focuses on assigning the number and type of manpower that allocated to each service. This study considers the licenced worker or Aircraft Maintenance Engineer Licence (AMEL) and non licenced worker or Aircraft Maintenance Technician (AMT). In this paper, we also consider the relationship of each station in terms of the possibility to transfer the manpower among them. The optimization model considers the number of manpowers needed for each service and the requirement of AMEL worker. This paper aims to determine the optimal manpower allocation using the mathematical modeling. The objective function of the model is to find the minimum employee expenses. The model was solved using the ILOG CPLEX software. The results show that the manpower allocation can meet the manpower need and the all load can be served.
This document outlines the Maintenance Implementation Plan (MIP) for the Plutonium Finishing Plant (PFP) located at the Hanford site at Richland, Washington. This MIP describes the PFP maintenance program relative to DOE order 4330.4B. The MIP defines the key actions needed to meet the guidelines of the Order to produce a cost-effective and efficient maintenance program. A previous report identified the presence of significant quantities of Pu-bearing materials within PFP that pose risks to workers. PFP's current mission is to develop, install and operate processes which will mitigate these risks. The PFP Maintenance strategy is to equip the facility with systems and equipment able to sustain scheduled PFP operations. The current operating run is scheduled to last seven years. Activities following the stabilization operation will involve an Environmental Impact Statement (EIS) to determine future plant activities. This strategy includes long-term maintenance of the facility for safe occupancy and material storage. The PFP maintenance staff used the graded approach to dictate the priorities of the improvement and upgrade actions identified in Chapter 2 of this document. The MIP documents PFP compliance to the DOE 4330.4B Order. Chapter 2 of the MIP follows the format of the Order in addressing the eighteen elements. As this revision is a total rewrite, no sidebars are included to highlight changes