WorldWideScience

Sample records for riyo kiban gijutsu

  1. Basic research program for innovated coal utilization in Japan. BRAIN-C program; Sekitan riyo kiban gijutsu kaihatsu. BRAIN-C program

    Energy Technology Data Exchange (ETDEWEB)

    Harada, M. [Center for Coal Utilization, Japan, Tokyo (Japan)

    1996-09-01

    This paper introduces the circumstances and purpose of establishing the Basic Research Associate for Innovated Coal Utilization (BRAIN-C) Program started in October 1995, and the summary of the results therefrom in fiscal 1995. Although development of coal utilization technologies has been implemented over a number of years, there are many problems still requiring solutions. Early realization has been urged on diversification of coal utilization, acceleration of technological development and diversification of coal types. In order to achieve these goals, the necessity was recognized afresh on not only the hardwares, but also on basic technologies in terms of software which can identify properties of coals, systematize different reactions, and estimate reactions, fluidity and heat transmission of coals. Therefore, receiving a subsidy from the Agency of Natural Resources and Energy of the Ministry of International Trade and Industry, a research and development program to be implemented jointly by industries, administrative agencies and academic societies had been started with a five-year plan for the time being. With the activities for the program such as collecting 50 to 100 types of coals and supplying them to researchers, the program had been accelerated in fiscal 1995 on a large number of themes and results therefrom, including fundamental properties and thermo-chemical reactions. 2 figs., 4 tabs.

  2. Report on achievements in fiscal 1999 on the project for research and development of an intellectual base creating and utilizing technology. Development of a screening test method with high accuracy for internal secretion disturbing substances; 1999 nendo chiteki kiban sosei riyo gijutsu kenkyu kaihatsu. Naibunpi kakuran busshitsu no koseido screening shiken hoho no kaihatsu oyobi data kiban seibi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper describes the achievements in fiscal 1999 on developing a screening test method with high accuracy for internal secretion disturbing substances. Development was made in cooperation with the OECD on the screening method that uses as a parameter whether a chemical substance has a hormone-like activity. For the womb breeding assay method to evaluate a feminine hormone-like activity, a reproducibility and comparison test was performed on womb breeding in immature rats administered with ethinylestradiol, the administration routes, and animals used (young and weak rats, and rats whose ovaries have been extracted). In order to evaluate a masculine hormone-like activity, the basic data were collected to develop the Hershberger method, and participation was made in the OECD verification tests. Discussions were given on comparison on castrated and non-castrated rats when 17 {alpha}-methyltestosterone was administered, the administration period of time and reproducibility when immature rats were used. The Hershberger method reactivity was discussed on rats relative to estrogen. In a toxicity test using 28-day repetitive administration, bisphenol A gave impacts on the kidney, the stomach and intestine tubes. (NEDO)

  3. Achievement report on research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a recombinant DNA utilizing technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Kumikae DNA riyo gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    Achievements were compiled on the research in fiscal 1981 on the 'research and development of a recombinant DNA utilizing technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. For the method to create energy saving type bacteria stocks for processes centering around the escherichia coli, refinement was carried out on cytochrome P-450 and NADPH-cytochrome P-450 reduction enzyme respectively from hepatic microsome of rats administered with induction agents. Attempts were made to prepare antibodies working on them. For the method to create high-efficiency secreting bacteria stocks centering around bacillus subtilis, activity measurement and quantification were performed on enzymes external to the bacillus sutilis, and research was executed on introduction of neutral protease gene sensitive to bacillus subtilis temperatures into the NA20-S17 stock. For the method to create bacteria stocks to substitute raw materials used in the chemical industry, studies were performed on separation of enzymes and corresponding genes, and incorporation of the genes into the escherichia coli. In the comprehensive investigation and research on the recombinant DNA utilizing technology, information exchange and discussions meetings were held, and investigations were made on literatures and patents. (NEDO)

  4. Report on achievements in fiscal 1999 on the project for research and development of an intellectual base creating and utilizing technology. Development of a base sequencer for ultra-difficult-to-read DNA; 1999 nendo chiteki kiban sosei riyo gijutsu kenkyu kaihatsu seika hokokusho. Chonandoku DNA enki hairetsu sequencer no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper describes the achievements in fiscal 1999 on developing a device to read ultra-difficult-to-read DNA basic sequence. When DNA synthesizes complementary chains by using DNA polymerase , the DNA incorporates deoxyribonucleatide triphosphates (dNTP, available in four kinds), stretches the complementary chains, and discharges pyrophosphoric acid at the same time. Light is emitted when this is converted into adenosine triphosphate (ATP) by using sulfurylase, and reacted with luciferase. Progress of the complementary chain synthesis can be known by monitoring this reaction. Which nucleic acid having been put into has caused the complementary chain synthesis can be known by sending the four kinds of dNTPs independently into the reacting section in the respective sequences, and the basic sequence of the subject DNA can be decided. It was so devised that the excess dNTP in the pre-reaction is decomposed by enzyme not to remain because the reaction is performed being divided step-wise. The problems in the development include: achievement of sequential complementary chain synthesis at high rate and with high reaction yield, decision of reacting conditions suitable for automation and micronization, and development of a module that can supply dNTP being the reaction material into the reacting section sequentially. A prospect was attained on developing the elementary technology. (NEDO)

  5. Fiscal 2000 achievement report on project for research and development of technologies for intelligent infrastructure creation and utilization. Development of high-efficiency protein expression system (Development of high-efficiency protein expression system utilizing protein folding mechanism of hyperthermophile); 2000 nendo chiteki kiban sose riyo gijutsu kenkyu kaihatsu jigyo seika hokokusho. Kokoritsu tanpakushitsu hatsugen system no kaihatsu (Cho konetsukin no tanpakushitsu oritatami kiko wo riyo shita kokoritsu tanpaku hatsugen system no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Studies were conducted aiming at a heterogenic expression system, with E. coli acting as the host, capable of high-efficiency expression of the protein of hyperthermophiles, hyperthermophilic archaebacteria in particular. In this fiscal year, 9 kinds of enzymes were caused by E. coli to express from the genomes of P. Horikoshi, A. pernix, etc., and examined for characteristics. Concerning the L-proline dehydrogenase obtained by the screening of hyperthermophiles of the Thermococcus profundus genus, it was noted that the ferredoxin was possibly a natural acceptor of electrons and that it was possibly an amino acid dehydrogenase of an utterly new category. Furthermore, it was found that the NADkinase of Pyrococcus horikoshii was a unique heat-resistant enzyme which used the inexpensive polyphosphoric acid instead of expensive ATP (adenosine triphosphate), and this justified a hope that it would be quite useful in the industrial production of NADP (H) (nicotinamide adenine dinucleotide phosphate). A success was attained in uniformly refining the glutamate dehydrogenase of hyperthermophilic and inactive Pyrobaculum islandicum produced by E. coli. (NEDO)

  6. Intelligent social infrastructure technology. Infrastructure technology support ultra-reliable society; Chiteki shakai kiban kogaku gijutsu. Choanshin shakai wo sasaeru kiban gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This survey was conducted to construct the core of intelligent social infrastructure technology (ISIT), and to investigate its practical application to industries and society. For realizing the ultra-safe and ultra-reliable society, it is necessary to develop the ISIT which can integrate various social infrastructures, such as architecture, city, energy, and lifeline systems required for living. For the systematization of cities, it is necessary to process and control the intelligent information by holding integrated and transverse information in common, as to logistics, lifeline, communication, monitoring, and control. For the communication engineering, the centralized systems are acceleratingly to be converted into the distributed network systems. For the mechanical engineering, intelligent control and robot technology are required. For the architectural engineering, a concept exceeding the conventional antiseismic structure idea is investigated. It is necessary to develop a new information technology providing an intelligent social infrastructures by merging the information networks and the physical world seamlessly. Necessity of ISIT is large for constructing the intelligent and ultra-reliable society consisting of these integrated and organized networks. 84 refs., 68 figs., 6 tabs.

  7. Microalgal biotechnologies for recycling of pollutants; Tayona sorui kino wo kiban to suru seibutsuken busshitsu junkangata sogo saishigenka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Miyamoto, K.; Nasu, M.; Hashimoto, C.; Tanaka, K.; Hirata, M. [Osaka University, Osaka (Japan). Faculty of Pharmaceutial Science; Fujita, M.; Takagi, M. [Osaka University, Osaka (Japan). Faculty of Engineering; Hirata, Y.; Taya, M. [Osaka University, Osaka (Japan). Faculty of Engineering Science; Yamanishi, H. [Osaka University, Osaka (Japan). Faculty of Medicine

    1997-02-01

    This paper describes the technology development by which biomass is produced by treatment of pollutants using microalgae, and is recycled. A bioreactor system has been developed, in which microalgal biomass can be obtained through the effective treatment of CO2 and NOx using microalgae having ability of increase under the severe condition with simultaneous flow of CO2 and NOx. A new method has been also developed for separating and recovering the microalgae. Materials, such as glucose, glycerol, acetic acid, and lactic acid, were produced from the obtained biomass through physico-chemical and biological treatments. These materials can be converted into ethanol and hydrogen. For this treatment and recycling system, functions as a part of natural material recycling were considered to be most significant. Development of an analysis and evaluation method of an impact of this system on the natural environment is also tried. 1 fig.

  8. Generic supercritical water technology; Generic technology to shite no chorinkaisui riyo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Arai, K.; Ajiri, M.; Inomata, H.; Smith, R.; Hakuta, Y. [Tohoku University, Sendai (Japan). Faculty of Engineering; Yokoyama, C. [Tohoku University, Sendai (Japan). The Institute forChemical Reaction Science; Chin, L. [New Energy and Industrial Technology Development Organization, Tokyo, (Japan)

    1997-02-01

    This paper describes the measurement and analysis for clarifying solution structure of supercritical water and exhibition mechanism of solvent functions. It also describes the development of new processes using supercritical water as reaction solvent. The PVT measurements were conducted in the supercritical region using pure water and NaCl aqueous solution, to confirm the reduction of molar volume of the electrolyte solution. The hydration structure was examined in the supercritical aqueous solution by the molecular dynamic simulation. As a result, presence of hydrogen bond structure, where the contribution of two branching hydrogen bond can not be ignored, was suggested under the supercritical condition. Characteristics of supercritical aqueous solutions are analyzed through in-situ Raman and scattered X-ray spectral measurements. Moreover, this paper introduces developments of some processes in the supercritical water, such as decomposition of wasted polymers, recovery of chemical materials, reforming of heavy hydrocarbons by contact hydrogenation, and synthesis of fine powders of metal oxide by reaction crystallization.

  9. 6th Conference on Coal Utilization Technology; Dai 6 kai sekitan riyo gijutsu kaigi koenshu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    The paper compiled the papers presented in the 6th Conference on Coal Utilization Technology held in September 1996. With relation to the fluidized bed boiler, reported were Field operation test of Wakamatsu PFBC combined cycle power plant and Development of pressurized internally circulating fluidized bed combustion technology. Regarding the coal reformation, Development of advanced coal cleaning process, Coal preparation and coal cleaning in the dry process, etc. Concerning the combustion technology, Study of the O2/CO2 combustion technology, Development of pressurized coal partial combustor, etc. About the CWM, Development of low rank coals upgrading and their CWM producing technology, Technique of CWM distribution system, etc. Relating to the coal ash, Engineering characteristics of the improved soil by deep mixing method using coal ash, Employment of fluidized bed ash as a basecourse material, On-site verification trials using fly ash for reclamation behind bulkheads, Water permeabilities of pulverized fuel ash, Separation of unburned carbon from coal fly ash through froth flotation, Practical use technology of coal ash (POZ-O-TEC), etc

  10. Report on achievements in fiscal 1999 on the project for research and development of an intellectual base creating and utilizing technology. Research and development of standard substances related to internal secretion disturbing chemical substances (researches on preservation stability and the valuing methods related to pure substance standard substances, mixed standard substances and composition type standard substances); 1999 nendo chiteki kiban sosei riyo gijutsu kenkyu kaihatsu seika hokokusho. Naibunpi kakuran kagaku busshitsu kanren hyojun busshitsu no kenkyu kaihatsu (junbusshitsu hyojun, kongo hyojun oyobi soseigata hyojun busshitsu ni kakawaru hozon anteisei, nezuke hoho nado ni tsuite no kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper describes the achievements in fiscal 1999 on researching and developing standard substances related to internal secretion disturbing chemical substances. Environmental contamination due to environmental hormones has a large number of scientifically unclear points. These points are related to the basic conditions for the existence of living organisms, whereas serious impacts transcending the generations are feared. In addition, the environmental hormones have been observed in water quality, water bottom quality, and living environments for aquatic animals. Standardization in technologies to measure them, and arrangement of standard substances are demanded strongly. Based on these circumstances, evaluations were given on the following matters: determination of purity of the reference substances with regard to the standard solutions of di-2-ethyl hexyl phthalate, di-n-butyl phthalate, and diethyl phthalate among the standard substances required for the measurement, establishment of methods for measuring impurities and preparing the standard solutions, establishment of the methods to measure concentrations of the standard solutions, and the preservation stability of the standard solutions. As a result, standard solutions with accurate concentrations and excellent stability were developed. In addition, development was performed on the composition type standard substance for which a certified value was given to PCB in soil. (NEDO)

  11. Final report of `research on advanced uses of cast materials`; Chusho kigyo taisaku gijutsu tokubetsu kenkyu `chuzo zairyo no kodo riyo gijutsu ni kansuru kenkyu` shuryo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    Tada, S.; Takahashi, T.; Abe, T. [Tohoku National Industrial Research Institute, Sendai (Japan)

    1997-03-31

    For the advanced utilization of casting iron, temperature differential austempering and partial austempering with the gradient mechanical properties of ADI (austempered ductile iron) by local electric method were experimentally investigated. For the former, gradient mechanical properties are obtained by giving temperature difference to the material in the process of austempering of casting iron, to add the strength and toughness. For the latter, mechanical properties are controlled by repeating partial austempering with changing the isothermal transformation condition by means of local electric method, to obtain the strength characteristics with appropriate balance. As a result of the former experiment, function gradient materials could be obtained with continuously changing internal mechanical properties. The fabricated material provided different properties depending on the direction of load. Radial crushing strength constant of the ring material depended on the treatment temperature of inside surface of the specimen. Fatigue and yield strengths can be simultaneously improved. As a result of the latter experiment, it was found that the mechanical properties can be improved at arbitrary part by the partial austempering. 13 refs., 25 figs., 4 tabs.

  12. Development of technology for thin substrate polycrystalline solar cells for practical use. Development of manufacturing technologies for low-cost substrates (low-cost Si sheets by continuous casting method); Usugata takessho taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Tei cost kiban seizo gijutsu kaihatsu (renzoku cast ho ni yoru tei cost Si kiban seizo gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on manufacturing of low-cost Si substrates by continuous casting method in fiscal 1994. (1) On manufacturing of ingots of 16 piece size, the ingot of nearly 170kg was manufactured by batch process using the Si melt injection unit prepared in last year. (2) On oxygen and carbon contents in wafers, the contents were measured by FT-IR after slicing of the ingot. As a result, the oxygen and carbon contents could be successfully reduced to the targets of 10ppma and 5ppma or less, respectively. (3) The resistivity distribution of the ingot ranged over the target of 1-2ohm-cm. (4) Cells of 100 {times} 100mm{sup 2} wide and 350{mu}m thick were verified by in-house evaluation process. Although lower cell conversion efficiency was found at the center top of the ingot, a vertical efficiency stability was nearly sufficient as a whole. (5) On the crystal growth unit prepared in fiscal 1994, any problems were not found on automatic driving and vibration during moving. 8 figs.

  13. Technologies and techniques for analysis and use of genome information, 1997; Genome joho kaidoku riyo gijutsu no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper clarified the whole image of cell functions by elucidating the function and manifestation control mechanism of genes existing in genomes, and the network of their interactions, and surveyed applicability of the useful functions obtained of cells and proteins to the industrial field. The survey was made from a viewpoint of the fields of both biology and information science. Especially, based on the function-known DNA base sequence database, the following technologies were surveyed: technology to predict the function of the function-unknown DNA base sequence, search/separation technology to acquire the genes to be functionally elucidated in a state of being suitable for manifestation, technology to get perfect proteins by effectively manifesting the genes to be functionally elucidated, and technology to analyze the function of the proteins obtained by manifestation of genes. Further, the International Symposium was held which is titled `Genome Research Opens a New World to Bioindustry (New Developments in Genome Informatics Technologies). With the future progress of technology to decipher and use genome information, the construction of much newer genome industry is anticipated. 165 refs., 44 figs., 10 tabs.

  14. Research trend survey on the stable isotope utilization technology; Antei doitai no riyo gijutsu ni kansuru kenkyu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report reviews the activities and the trends in the area of the stable isotope use attracting attention recently. In the medicine and clinical treatment sector, the remarkable trends are the extension of {sup 13}C use. The breath test and the magnetic resonance spectroscopy (MRS) diagnosis have been developed as inspection methods. It is noted that investigation has been initiated on the magnetic resonance imaging (MRI) using {sup 3}He and {sup 129}Xe for the lung imaging. In the organic chemistry and biochemistry sector, the stable isotopes are used for analyzing the structures of complicated natural compounds and materials relating to life science and for analyzing the chemical reaction mechanism of organic compounds. In the nuclear energy sector, {sup 10}B and {sup 7}Li have been used as neutron absorption materials and pH neutralizing reagent, respectively. In the analysis and measurement sector, the process of isotopic dilution is used for the environmental analysis of trace elements including harmful substances. Among various separation methods of isotopes, well studied uranium enrichment processes and deuterium separation processes are described. Separation of {sup 15}N by ion exchange resin method and plasma ion cyclotron resonance (ICR) isotope separation have been studied, recently. 133 refs., 53 figs., 7 tabs.

  15. Advanced high temperature fluid technology development using microgravity environment; Bisho juryoku kankyo riyo kodo koon ryutai gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Behavior of gas/liquid two-phase flow in tubes and behavior of air bubbles in liquid were investigated under the microgravity environment without convection by using the drop test facilities of the Japan Microgravity Center. To remove bubbles in the liquid under gravity, the strength of surface tension acting on the gas/liquid interface was made inhomogeneous. In this case, the moving velocity of bubbles on the gas/liquid interface was able to be raised up to the maximum of 2.4 mm/s. For the movement of bubbles in the horizontal direction under the condition of low relative velocity independent of the size of air bubbles in the duct, bubbles moving in the horizontal direction under 1g flowed almost linearly accompanying with the liquid flow. For the air bubble distribution in the bubble flow, where small bubbles flow in the vertical tubes, the fluid pattern of air bubble flow under 1g and {mu}g depended greatly on the initial condition of mixed bubbles. Fundamental data were obtained, as for the transportation and control of multicomponent bubbles, bubbles in the sound field, and bubbles in the liquid phase by magnetic force, and the fluid phenomena of bubbles in the subcool boiling region, a single bubble in the gradient electrical field, and bubbles in the tubes with small diameter. 47 refs., 97 figs., 8 tabs.

  16. Research study on analysis/use technologies of genome information; Genome joho kaidoku riyo gijutsu no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For wide use of genome information in the industrial field, the required R and D was surveyed from the standpoints of biology and information science. To clarify the present state and issues of the international research on genome analysis, the genome map as well as sequence and function information are first surveyed. The current analysis/use technologies of genome information are analyzed, and the following are summarized: prediction and identification of gene regions in genome sequences, techniques for searching and selecting useful genes, and techniques for predicting the expression of gene functions and the gene-product structure and functions. It is recommended that R and D and data collection/interpretation necessary to clarify inter-gene interactions and information networks should be promoted by integrating Japanese advanced know-how and technologies. As examples of the impact of the research results on industry and society, the present state and future expected effect are summarized for medicines, diagnosis/analysis instruments, chemicals, foods, agriculture, fishery, animal husbandry, electronics, environment and information. 278 refs., 42 figs., 5 tabs.

  17. Practical use technology of coal ash (Poz-O-Tec); Sekitanbai no yuko riyo gijutsu (POZ-O-TEC)

    Energy Technology Data Exchange (ETDEWEB)

    Konno, K. [Center for Coal Utilization, Japan, Tokyo (Japan); Saito, Y. [Mitsui Mining Co. Ltd., Tokyo (Japan); Nagaya, Y. [Mitsui Construction Co. Ltd., Tokyo (Japan)

    1996-09-01

    In order to utilize more effectively coal ash whose generation amount is increasing year after year, studies have been made on a technology to manufacture and utilize a high-strength substance solidified under normal temperature by utilizing hydration reaction of pozzolan system (Poz-O-Tec). The study works have been done as a subsidy operation of the Agency of Natural Resources and Energy, and were completed in fiscal 1995. Poz-O-Tec is a wet powder made of coal ash and stack gas desulfurization sludge (gypsum) added and mixed with lime and an adequate amount of water, which solidifies by hydration as pozzolan does. The same method as used for ordinary sands may be used as the basic application method. Because this is the material whose strength increases after construction, thickness of construction may be reduced smaller than in constructions using soils and sands. Test constructions of about sixty cases have been carried out to date, typically represented in use as a road bed material, banking, and a base material for water-barrier gutters. High-strength solid material which is stable under normal temperature may be obtained by adjusting calcium content. As a result of its effectiveness in practical use having been verified, a certificate of technological judgment has been issued for the material by the Civil Engineering Research Center. 3 refs., 11 figs., 2 tabs.

  18. Technology of CCS coal utilization (outline of large-size demonstration test for CCS); CCS tan riyo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Konno, K. [Center for Coal Utilization, Japan, Tokyo (Japan); Hironaka, H. [Idemitsu Kosan Co. Ltd., Tokyo (Japan)

    1996-09-01

    The coal cartridge system (CCS) is a series of the total system, in which coal is processed centrally at a supply base for each unit of consumer areas, supplied as pulverized coal in bulk units, and coal ash after combustion is recovered and treated. The system is expected of advantages resulted from the centralized production, elimination of handling troubles, and cleanliness. Following a small scale demonstration test, a large demonstration test for practically usable scale has begun in 1990, and completed in fiscal 1995. This paper introduces the CCS and reports the result of the test. In the large demonstration test, a supply station (with manufacturing capability of 200,000 tons a year) was installed in the Aichi refinery of Idemitsu Kosan Co., Ltd., and systematization on quality design and system technologies has been carried out. Long-term continuous operation for five years was achieved (operation time of the supply facilities was about 19,000 hours) without a failure and accident, to which every elemental technology was evaluated highly, and convenience and reliability of the system was verified. 13 figs., 3 tabs.

  19. Transition of wind power utilization technology in the 20th century; 20 seiki ni okeru furyoku riyo gijutsu no hensen

    Energy Technology Data Exchange (ETDEWEB)

    Ushiyama, I. [Ashikaga Inst. of Tech., Tochigi (Japan)

    2000-04-01

    Windmills are one of the oldest prime movers and have been used for more than 700 years in Europe. The transition from low speed windmills for grain grinding and water pumping to high speed wind turbines for electric power generation had occurred at the end of 19{sup th} century. This paper, at first, reviews the windmill technologies and the researchers before 20th century. Then describes the back ground of how the wind power generator has existed and how the four pioneers developed their wind power generator. The historical developments of windmills to wind turbines in this century are studied focusing mainly on Danish activities. Then, the effort of the development of large wind turbine such as Smith-Putnum's first MW machine in U.S.A. and other mammoth machine concept are introduced. The new concept machines such as Savonius and Darrieus wind turbines in 1920s to 1930s are also explained. Finally, the novel technologies of wind turbine covering larger machines, variable speed generators, special wing sections for wind turbines, theoretical analysis method of wind turbine performance, offshore wind turbines, and wind turbine control technologies are stated. (author)

  20. Report on the results of `the R and D of industrial technology information base arrangement`; `Sangyo gijutsu joho kiban seibi kenkyu kaihatsu` seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In relation to information processing in the open type research information networking, R and D were conducted to establish basic technologies such as grading-up, acceleration, enhancement of efficiency, diversification of application, promotion of usable data accumulation, etc. As to the R and D of software to promote sharing of research information, software was developed which can easily modify and renew management objects for users at research sites, etc., and the target was almost achieved. Concerning the R and D of information supply technology, an approach was presented whereby clients submit bids for each stream of the data requested and the admission decision is made so as to maximize gain of the session under network capacity constraints. Additionally, the R and D were made of software to construct an international information sharing system, a system for multi-lingual I/O, text manipulation and communication, and software for remote use of network based information for scientific computing. 138 refs., 125 figs., 33 tabs.

  1. Fiscal 1997 report on the investigational research on intelligent social infrastructure technology; 1997 nendo chosa hokokusho (chiteki shakai kiban kogaku gijutsu no chosa kenkyu hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper first described an aim and outline of intelligent social infrastructure technology, summed up the system of social infrastructure and the situation in Japan in terms of the structure, lifeline, moving bodies such as railroad and automobiles, communication, security, and maintenance. Considering this present situation, the paper next described a concept of the intelligent social infrastructure technology to be newly constructed and a course of the development. Besides, as subjects required to study for the development of intelligent social infrastructure technology, it reported on risk management, methods of definition/collection/transfer/supply of information, infrastructure applicable at emergency, normal/emergency dual course system, privacy, robustness, and additionally the problems to be caused pertaining to architecture/civil engineering, traffic, security, communication, etc. when the infrastructure develops as a social system. Moreover, as element technology, the intelligent system related technology and data communication technology were described in detail. Examples of the research project were also reported. 101 refs., 70 figs., 42 tabs.

  2. Fiscal 1998 research achievement report. Development of key technology for high-efficiency semiconductor manufacturing process; 1998 nendo kokoritsu handotai seizo process kiban gijutsu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    In the development of large-aperture/high-density plasma technology, research and development was carried out for balanced electron drift plasma technologies for uniform control of plasma density and the like, such as an excited plasma source and plasma drift to enable wide-range plasma generation in a chamber. In the development of high-efficiency exposure technology, studies were made for stable generation and control of short wavelength excimer laser and for higher-speed large-aperture mask writing by use of an electron beam. In the development of higher-speed processing and energy-efficient technologies, research and development was conducted involving probe card technology for increasing the speed of semiconductor inspection, software-aided virtual tester technology, local energy-efficient cleaning technology in wafer processing and transportation, sheet-type flexible manufacturing system, and the like. (NEDO)

  3. Development of practical application technology for photovoltaic power generation systems in fiscal 1997. Development of technologies to manufacture thin film solar cells, development of technologies to manufacture materials and substrates, development of technologies to manufacture amorphous-based high-quality materials and substrates (Volume 1); 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu. Usumaku taiyo denchi no seizo gijutsu kaihatsu, zairyo kiban seizo gijutsu kaihatsu, amorphous silicon kei kohinshitsu zairyo kiban no seizo gijutsu kaihatsu (daiichi bunsatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Research and development was made for the purpose of reducing cost and enhancing safety and reliability in amorphous solar cells. In the research of photo-deterioration phenomena in amorphous silicon, measurements were made on bending displacement alternately when light irradiation is turned on and off on an a-Si:H film manufactured at a substrate temperature of 250 degrees C and the SiH{sub 4}:H{sub 2} ratio at 1:4. As a result, a result was obtained that the film has swollen. It was made clear that this phenomenon is reversible from the fact that one-hour annealing at 200 degrees C has returned the film to the initial condition, and another light irradiation reproduces the light-induced swelling. In developing a stable and transparent electrically conductive substrate for a thin film solar cell, aqueous silica-sol solution dispersed with polymeric micro-fine particles was painted and printed uniformly on a glass substrate for the purpose of improving the permeation rate. As a result, a low-reflection film was obtained after sintering at about 500 degrees C. This has allowed visible light permeation rate to increase by 87%, thus having achieved the objective for fiscal 1997. In order to enhance mass production performance for this transparent conductive substrate, development was performed on a technology to form a texture with even thinner film. (NEDO)

  4. Report on surveys in fiscal 2000 on the survey on foundation to establish industrial technology strategy. Survey on hyper-intellectual-IT infrastructure; 2000 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Kodo chiteki joho gijutsu kiban (Hyper-Intellectual-IT Infrastructure) chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    As a result of rapid proliferation of the Internet and the use of broadband in networks, it is anticipated that design, manufacture, and research will be performed with a large number of simulators and databases dispersed on the networks working in coordination. Therefore, surveys have been carried out on the current status of computer utilizing methods, the current status of data expressing methods, the current status of the network dispersion environment, the current status of simulators, and the current status of the software calculation services. Functions to be possessed by the hypothetical cooperation type research, design and manufacturing environments were extracted, and so were the problems in the current situation. Indicated as the most important assignment were the extraction of the data exchanging common platform and the functions thereof, the extraction of fee charging and security mechanisms, and the problems in the intellectual properties and the protection thereof. Further enumerated as the important assignment were unification and integration of the measures taken by the government, improvement in the basic hardware environment, establishment of the software structuring policies, and listening to opinions from wide areas on software, OS, and data structure. (NEDO)

  5. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the technology to fix and effectively use carbon dioxide using bacteria and microalgae (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of contributing to the solution to the global environmental problem, a technology is developed in which by searching for/breeding/developing bacteria, etc. which conduct photosynthesis highly effectively, CO2 is fixed and recycled. The fiscal 1996 R and D is outlined as the utilization of bacteria, microalgae, etc. Obtained were microalgae exceeding the conventional strains in CO2 fixation ability, and bacteria/microalgae excellent in production of polysaccharides, hydrocarbon, lipid, biological active substances, etc. The fundamental study was continued of CO2 integrated enzyme function/reaction system as molecular biological breeding. In the cell fusion, a set-up of conditions for green algae was started. For the confirmation of performance of high dense/quantity culture technology using solar light, further improvement of performance and systematization, 200L scale testing equipment was manufactured. It is a collective reactor and enabled study of ventilation/agitation and control of light strength. A reactor analysis model was constructed. Also including the conversion into useful substances, energy/material balance was systematically studied. Collection of technical literature and information exchanges were made in Japan and overseas. 276 refs., 475 figs., 156 tabs.

  6. Industrial science and technology research and development business for fiscal 1998. Research and development achievement report on glycoconjugate production and utilization technologies (Development of technologies of glycoconjugate-aided CO{sub 2} fixation and utilization); 1998 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo. Fukugo toshitsu seisan riyo gijutsu no kenkyu kaihatsu seika hokokusho (fukugo toshitsu oyo nisanka tanso koteika yuko riyo gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Enzymatic and chemical methods were combined and methods were developed for synthesizing mucin type sugar chains and glycopeptides. The influence of sugar chain positions and structures on glycoconjugate stereo structures and physiological activities was analyzed, and glycopeptide structural activities and glycoconjugate remodelling were studied. To create an industrial advantage in a glycoprotein production system by use of zooblasts, sugar chain structure control through sugar transfase occurrence control was studied. For the production of man-adaptive sugar chains using yeast, new yeast variations were subjected to molecular breeding, and tested for the resultant improvement on productivity. Sugar chain marking and refining techniques and various responding mechanisms on the solid surface were elucidated, which enabled structure analyses using sugar chain recognition molecules such as lectins and antibodies. A database on interactions between sugar chains and sugar chain recognition molecules was constructed using the said findings. An analyzing program was also formulated tentatively. This paper also covers general surveys and studies on technologies of producing and utilizing glycoconjugates. (NEDO)

  7. FY 1998 industrial technology R and D project. Report on the results of the development of utilization technology of biological resource such bioconsortia system (Development of production technology of biological use petroleum substituting fuels); 1998 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugo seibutsukeinado seibutsu shigen riyo gijutsu kaihatsu (seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Technology development was conducted for production of useful substances using the bioconsortia system. In FY 1998, the development of element technology was studied. As to the utilization technology of gut symbiotic microorganisms such as termite and longhorn beetle, clone types of gut microorganism complex system were analyzed to find out the diversification. In the decay of wood, co-culture of two species of mold fungus was increased in efficiency than single culture. More than 90% was classified/identified of the mold fungi accumulated (in wood piece)/separated for the utilization of plant symbiotic microorganisms. For the production of petroleum substituting useful resource, conditions were established of callus induction from immature embryos of tropical oil crops, especially oil palm, and of regeneration of a lot of small plants from the callus. To establish the Agrobacterium-mediated transformation system of oil palm, the binary vector harboring the reporter gene and selectable marker gene was constructed. Using the vector, oil palm tissues are inoculated and infected with agrobacteria. To heighten the function of palm oil, 10 particular clones were selected from the complementary DNA library obtained from oil palm fruit tissues. The genetic study of germs was also made. (NEDO)

  8. Environmentally friendly type coal utilization technology transfer project. Downstream field; Kankyo chowagata sekitan riyo gijutsu iten jigyo. Karyu bun`ya

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper arranged the result of the clean coal technology transfer project carried out during October to December, 1996. For the purpose of supporting introduction/spread of clean coal technology (CCT) in Asian and Pacific countries, the project invited engineers of the countries to Japan, aiming at fermentation of the understanding of CCT and improvement in ability. The project was held by NEDO and managed by Center for Coal Utilization, Japan. The manager course is for policy decision makers, management and senior management (plant manager class). By taking up CCT assessment and a menu of economical efficiency, prepared was the environment to which CCT is introduced in case of working out policy and planning plant/equipment investment. Moreover, the engineer course is for policy planners, medium-class management (section chief class), senior engineers (planners), and takes up materials for judgment in case of planning CCT facilities and proposing measures to reduce environmental loads by management and improvement of facilities at the same time. Fifteen engineers were invited: 6 from China, 3 from Indonesia, 3 from the Philippines, and 3 from Thailand

  9. Development of melting system using oxy-coal combustion; Sekitan chokusetsu riyo kinzoku yoyu system gijutsu (NSR) (pilot setsubi unten jokyo ni tsuite)

    Energy Technology Data Exchange (ETDEWEB)

    Sugiyama, T. [Center for Coal Utilization, Japan, Tokyo (Japan); Suwa, T.; Kobayashi, N.; Iino, K.; Yamamoto, Y.; Igarashi, H. [Nippon Sanso K.K., Tokyo (Japan)

    1996-09-01

    This metal melting system is a process to efficiently melt and regenerate scraps of aluminum, copper and iron by utilizing high-temperature energy obtained from pulverized coal-oxygen combustion. The process is intended to utilize coal in place of petroleum for reduced fuel cost. Joint studies have been carried out as a subsidy operation of the Agency of Natural Resources and Energy with a schedule of six years starting fiscal 1992. Development tests are being performed using a 5-ton/ch pilot plant facility since fiscal 1995 after having gone through experiments using a 1-ton/ch bench scale furnace. This paper reports the results obtained to date. Using the pilot plant facility, fiscal 1995 has achieved the initial target values, such as thermal efficiency of 55% or higher, and yield of 96% or higher for non-ferrous metals and 94% or higher for iron. The melting behavior in the furnace has improved the thermal efficiency as a whole by retaining the conditions in the preheating step for an extended period of time. The thermal efficiency has been improved better than with the bench furnace as a result of upscaling effect. 9 figs., 3 tabs.

  10. Fiscal 1998 research report. Application technology of next-generation high-density energy beams; 1998 nendo chosa hokokusho. Jisedai komitsudo energy beam riyo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Survey was made on application technologies of next- generation high-density energy beams. For real application of laser power, application to not exciting source of YAG crystal but machining directly is highly efficient. For generation of semiconductor laser high-power coherent beam, phase synchronization and summing are large technological walls. Short pulse, high intensity and high repeatability are also important. Since ultra-short pulse laser ends before heat transfer to the periphery, it is suitable for precise machining, in particular, ultra-fine machining. To use beam sources as tool for production process, development of transmission, focusing and control technologies, and optical fiber and device is indispensable. Applicable fields are as follows: machining (more than pico seconds), surface modification (modification and functionalization of tribo- materials and biocompatible materials), complex machining, fabrication of quantum functional structured materials (thin film, ultra-fine particle), agriculture, ultra-precise measurement, non-destructive measurement, and coherent chemistry in chemical and environment fields. (NEDO)

  11. Wind energy technology : from the past to the future; 20 seiki ni okeru furyoku riyo gijutsu no henkan. Furyoku hatsuden : kako kara mirai e

    Energy Technology Data Exchange (ETDEWEB)

    Ushiyama, I. [Ashikaga Institute of Technology, Tochigi (Japan)

    2000-01-20

    Windmills are one of the oldest prime movers and have been used for more than 700 years in Europe. The transition from low speed windmills for grain grinding and water pumping to high speed wind turbines for electric power generation had occurred at first, reviews the windmill technologies and the researchers before 20{sup th} century. Then describes the back ground of how the wind power generator has existed and how the four pioneers developed their wind power generator. The historical developments of windmills to wind turbines in this century are studied focusing mainly on Danish activities. Then, the effort of the development of large wind turbine such as Smith-Putnum's first MW machine in U.S.A. and other mammoth machine concept are introduced. The new concept machines such as Savonius and Darrieus wind turbines in 1920s to 1930s are also explained. Finally, the novel technologies of wind turbine covering larger machines, variable speed generators, special wing sections for wind turbines, theoretical analysis method of wind turbine performance, offshore wind turbines, and wind turbine control technologies are stated. (author)

  12. Report on the results of research and development under a consignment from NEDO on deca-nano quantum integrating transistor substrate technologies; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Deca-nano ryoshi shusekika soshi kiban gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Researches have been conducted on deca-nano quantum integrating transistor substrate technologies, and developments were made on a three-dimensional device simulator which can be used in deca-nano domains, and a circuit simulator to have quantifying function transistors coexist with silicon semiconductor integrated circuits. The researches were intended to develop a simulator capable of analyzing properties of very small silicon and compound semiconductor devices in deca-nano domains. The researches discussed the applicability of conventional simulators, calculated quantum levels in a three-dimensional hetero structure, and resulted in development of an electron wave propagation simulator in optional two-dimensional shapes, a quantum Monte Carlo simulator, and a three-dimensional semiconductor device simulator with quantum correction. On the other hand, in order to estimate characteristics of a hybrid circuit in which single electron transistors coexist with conventional transistors such as CMOS transistors, a single electron hybrid circuit simulator was developed. The development indicated that a CMOS-SET fused memory is promising as a future LSI memory. 22 refs., 116 figs., 3 tabs.

  13. Research on fabrication technology for thin film solar cells for practical use. Research on low-cost fabrication technology for large-area modules (Over-layered TCO on tempered glass for solar cell); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Daimenseki module no tei cost seizo gijutsu (kyoka class fukugo tomei doden kiban seizo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on the fabrication technology of over-layered TCO on tempered glass in fiscal 1994. (1) On the fabrication technology of heat-resistant over-layered TCO, thermal deformation of TCO substrates was studied by both experiment and numerical computation. The thermal deformation increased with carrier concentration. As the observation result on change in lattice strain of heated TCO films by high-temperature X-ray diffraction, lattice strain was largely affected by thermal expansion. (2) On development of the low-temperature heat treatment method of TCO films, a technological prospect was obtained for fabrication of low-resistance TCO films by heat treatment without strength deterioration of tempered TCO substrates. (3) On development of cost reduction technology, the large-area CVD equipment was devised on the basis of the inline tempering method which tempers substrate glass by air cooling after formation of SnO2 film as fabrication method of tempered TCO. The TCO substrate tempered by air cooling could endure the drop test of 227g and 1.5m. 5 figs., 1 tab.

  14. Development of technology for thin substrate polycrystalline solar cells for practical use. Development of manufacturing technologies for low-cost substrates (technical development for production of high purity silicon); Usugata takessho taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Tei cost kiban seizo gijutsu kaihatsu (taiyo denchiyo silicon seizo gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on development of manufacturing technologies of Si for solar cells in fiscal 1994. (1) P in Si could be successfully reduced to 0.1ppmw by EB melting method. The condition possible to reduce P in Si while continuously supplying metal Si was found. The 20kg class EB melting equipment was also designed and manufactured which can be connected with solidifying rough refining process. (2) Use of a water-cooling copper mold was studied using a small melting equipment for cost reduction in solidifying rough refining process. As a result, the prospect of crucible-free technology for removal of P and solidifying rough refining was obtained. (3) B in Si could be successfully reduced to the target of 0.1ppmw by vapor addition method using a plasma melting equipment. (4) The prototype SOG-Si achieved a conversion efficiency of 14.1% as solar cell. In addition, the advanced solar cell prepared by efficiency enhancement process achieved a conversion efficiency of 15.9%. 3 figs.

  15. Development of technology for thin substrate polycrystalline solar cells for practical use. Development of manufacturing technologies for low-cost substrates (low-cost Si substrates); Usugata takessho taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Tei cost kiban seizo gijutsu kaihatsu (usugata takessho kigan seizo gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on manufacturing technologies for low-cost high-quality Si substrates in fiscal 1994. (1) On the 220mm square type electromagnetic casting technology, development of fast stable casting technology was studied using the previously installed 220mm square type electromagnetic casting furnace. As a result, continuous stable casting was achieved at high casting speed up to 3.0mm/min. Any degradation of crystalline quality due to high speed casting was not found. (2) On the 350mm square type electromagnetic casting furnace, oscillation circuit constants were analyzed for design of the power source for No.4 electromagnetic casting furnace. In graphite heating experiment using the 350mm square type water-cooling copper crucible heated by 1000kW high-frequency power source, sufficient heat quantity was obtained for initial melting of Si. Any problems in Si melting were not found through Al block melting test. 6 figs.

  16. Technological development for super-high efficiency solar cells. Technological development of solar-high efficiency singlecrystalline silicon solar cells (high quality singlecrystalline silicon substrates); Chokokoritsu taiyo denchi no gijutsu kaihatsu. Chokokoritsu tankessho silicon taiyo denchi no gijutsu kaihatsu (kohinshitsu tankessho silicon kiban no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on technological development for high quality efficiency singlecrystalline silicon substrates in fiscal 1994. (1) On electromagnetic casting/once FZ bath method, a Si single crystal of 600mm long was successfully obtained by improvement of power source frequency and furnace parts. High carbon content resulted in no single crystal including solids. In undoped electromagnetic casting ingots, resistivities over 1500ohm-cm were obtained because of effective preventive measures from contaminants. (2) On electromagnetic melting CZ method, since vibration and temperature control of melt surface by magnetic shield was insufficient for stable pulling of single crystals, its practical use was hopeless. (3) On electron beam melting CZ method, a Si single crystal of 25mm in diameter was obtained by preventive measures from evaporation of Si and influence of deposits, and improved uniform deposition distribution in a furnace. The oscillation circuit constant of power source, and water-cooling copper crucible structure were also analyzed for the optimum design of electromagnetic melting furnaces. 3 figs., 1 tab.

  17. International Clean Energy System Using Hydrogen Conversion (WE-NET). subtask 4. Development of hydrogen production technology; Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 4. Suiso seizo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This paper describes development of hydrogen production technology as a part of the WE-NET project. For the solid polymer water electrolysis method higher in efficiency and lower in cost than the previous methods, 5 companies have developed element technologies for improving electrolysis cells and synthesis technologies of hot solid polymer electrolyte based on each proper catalyst electrode production method. In fiscal 1996, the initial study on large-scale systems by middle laboratory cells was made as well as improvement of electrolysis performance by small laboratory cells and endurance tests. Among the previous methods such as a hot press method (bonding of an ion exchange membrane to an electrode), an electroless plating method (preparation of porous surface onto a membrane electrode assembly), a zero gap method (preparation of high-efficiency high-current density cells), and a sintered porous electrode method (carrying of the mixture of catalytic powder and ion exchange resin-dissipated solution onto sintered metallic porous electrode surface), the former two methods were adopted for development of bench-scale cells as effective promising methods. 192 refs., 183 figs., 108 tabs.

  18. Worldwide clean energy system technology using hydrogen (WE-NET). subtask 9. Investigation of innovative and leading technologies; Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 9. Kakushinteki sendoteki gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The WE-NET Project is a long-term project designed to ensure that an energy network technology using hydrogen becomes a reality not later than 2020. So the project cannot remain effective unless constant efforts are made to foresee future trends of technology and optimize it as the making of entire system for the project. In this project, new technologies which are not up for development are also investigated. Their feasibility should be studied, if necessary. From the foregoing point of view, new technologies are studied, collected and evaluated. Thus, useful suggestions and proposals may be made as to the course for the project to follow, as well as its research and development. Proposals highly evaluated up to FY 1995 are the hydrogen-oxygen internal-combustion Stirling`s engine, hydrogen production by solid oxide electrolysis, magnetic refrigeration technology for liquefaction of hydrogen, solar thermal hydrogen production with iron sponge technology, and hydrogen producing technology with photocatalyst. Conceptual investigation themes in FY 1996 are the hydrogen internal-combustion Stirling engine, solar thermal hydrogen production, phototransformation process, and high-temperature steam electrolysis. 9 figs., 54 tabs.

  19. Research and development of utilization technology of solar thermal energy system for industrial and other use. International joint technology development for solar energy utilization systems; Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Taiyo energy riyo system kokusai kyodo gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Takita, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for international joint technology development for solar energy utilization systems. The joint study with an Indonesian research institute takes a model of lumber drying plant for the design and feasibility study. All the parts it needs are technically available in Indonesia, except carbon fiber sheets and electronic devices for controlling purposes. The drying cost is higher than that of a plant which procures charge-free wood fuel, but lower than that of a plant which procures fuel at 30$/t. A cacao drying plant model is also studied. The feasibility study shows that the initial investment for the blowing-up model is much higher by 60% to 100% than that for the conventional plant. Its fuel cost is lower by 11% than that of residual oil but 27% higher than that of wood. 4 figs.

  20. Report on the results of research and development under a consignment from NEDO of glycoconjugate production utilizing technologies. Development of technologies to fix and effectively utilize carbon dioxide by applying glycoconjugates; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Fukugo toshitsu seisan riyo gijutsu no kenkyu kaihatsu (fukugo toshitsu oyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper reports research results in fiscal 1997 for the `research and development of glycoconjugate production utilizing technologies`. In synthesizing, utilizing and remodeling technologies for glycoconjugates by means of chemical synthesis, studies were performed on developing methods to synthesize Gal {beta}1-3Gal NA(c {alpha})1-0-Serine in preparative scale, synthesizing high mannose type sugars of natural type without protection groups, and linking GlcNA or GalNAc onto partial peptide of fibroblast growth factor (FGF). In synthesizing, utilizing and remodeling technologies for glycoconjugates by using biological methods, studies were carried out, with regard to glycoconjugate synthesizing, utilizing and remodeling technologies utilizing animal cells, on identifying sugar structures of IFN-{gamma} produced from CHO cell line, and isolating CHO cell lines introduced with genes of sugar transferred enzyme GnTIV and/or GnTV. Furthermore, studies were conducted on glycoconjugate synthesizing, utilizing and remodeling technologies utilizing microorganisms, and glycoconjugate structure analyzing technologies. In addition, overall investigation was made on glycoconjugate production utilizing technologies. 113 refs., 76 figs., 18 tabs.

  1. FY 1997 R/D project of industrial and scientific technologies contracted with NEDO. Report on technology development of utilization of biological resources such as bioconsortia (development of analytical techniques of bioconsortia); 1997 nendo sangyo gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu (fukugo seibutsukei kaiseki gijutsu no kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Bioconsortia are microbial composites composing of more than two kinds of microorganisms with special functions. To utilize their advanced functions, some techniques have been developed for analyzing their functions and interactions, and for identification, separation and incubation of the constituent microbial groups. In FY 1997, an investigation was made on technology trends, domestic researchers, and research topics related to bioconsortia. To manage and promote the progress of research at the National Institute of Bioscience and Human-Technology where the centralized management of this project is conducted, meetings are held once a month to examine the progress at the institute, in which reports are made and discussions are held on how each research item is progressing. In addition, meetings of the committee to promote research are held every other month to consider and examine measures required for promoting the research. Re-entrustment of research has been made on two subjects, i.e., `Studies on biological significance of symbiotic microorganisms` by Prof. Ishikawa of the University of Tokyo, and `Study on the relationship between the biosynthesis of useful terpenic materials of plant origin and the differentiation of plant tissues, and their effective production by plant cell cultures` by Prof. Inoue of Gifu Pharmaceutical University. 27 refs., 13 figs., 1 tab.

  2. FY 1997 report on the survey of fundamental technologies in the field of brain neuro-biotechnology; 1997 nendo Sendo kenkyu hokokusho (noshinkei saibo kogaku kiban gijutsu no chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In Japan with its rapidly aging society, fundamental technologies are required for the development of artificial nerves substituting for or supporting damaged ones, and ultimately constituting artificial neurons based on the knowledge of the brain functions at the molecular and cellular levels. This study defines the fundamental technologies which would be required for the development in the area, and further, evaluates the potential of the technologies to develop the novel industry. The brain function is closely related to the activity in neuronal circuits. In order to repair injured nerves and to develop the advanced technologies of electronics for helping impaired neuronal functions, the most important and urgent is to understand how to work the neuronal circuit system in the brain. Based on these viewpoints, new methodological approaches would make it possible to relieve neural impairment in the sensory input system and the motor system by the use of electronic circuits. They also would improve rehabilitation after injury, and treat neurodegenerative diseases such as Parkinson`s disease. These advances surely create the new types of industry seeds in near future. 77 refs., 29 figs., 2 tabs.

  3. FY 1997 research and development of fusion domains. Part 3. Studies on next generation optical substrate technologies; 1997 nendo seika hokokusho (yugo ryoiki kenkyu kaihatsu). 3. Jisedai hikari kiban gijutsu no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    With an objective of realizing super large capacity recording technologies largely exceeding the current limits of optical recording and magnetic recording, studies were conducted on application of near-field optics. In the study on recording by using near-field light, it was verified that a mark with approximately the same size as an aperture diameter can be formed on a phase change recording film when a fiber probe with an aperture diameter of about 200 nm is used. However, it was found that the recording using this system takes excessive amount of time. When laser light collected on an objective lens was irradiated pulse-wise, a mark with a minimum width of about 20 nm was observed with high contrast. This will mean that a record with recording density of one terabit/in {sup 2} can be read out. Other studies performed include those on evaluation of effects of polarized light and surface shape on near-field read-out, simulation, mechanism of crystallization in a phase change recording film, recording and playback with ultra-high resolution by using a conformable near-field aperture, fabrication of a flat aperture type near-field light probe array, and the evaluation thereon. 22 refs., 27 figs.

  4. Achievement report for fiscal 1997. Technological development for practical application of a solar energy power generation system /development of technology to manufacture solar cells/development of technology to manufacture thin film solar cells (development of technology to manufacture materials and substrates (development of technology to manufacture silicon crystal based high-quality materials and substrates)); 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyo denchi seizo gijutsu kaihatsu, usumaku taiyo denchi seizo gijutsu kaihatsu, zairyo kiban seizo gijutsu kaihatsu (silicon kesshokei kohinshitsu zairyo kiban no seizo gujutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    It is intended to develop thin film solar cells capable of mass production with high photo-stability and at low cost. Thus, the objective of the present research is to analyze the growth process of micro crystal silicon based thin films, the crystal being a high quality silicon crystal based material, and develop technology to manufacture high-quality micro crystal silicon thin films based on the findings therefrom. It was found that, when silicon source is available in cathode, pure hydrogen plasma forms micro crystal silicon films by using the plasma as a result of the chemical transportation effect from the silicon source. It was revealed that the crystal formation due to hydrogen plasma exposure is performed substantially by the crystals forming the films due to the chemical transportation effect, rather than crystallization in the vicinity of the surface. The crystal formation under this experiment was concluded that the formation takes place during film growth accompanied by diffusion of film forming precursors on the surface on which the film grows. According to the result obtained so far, the most important issue in the future is particularly the control of crystal growing azimuth by reducing the initially formed amorphous layer by controlling the stress in the initial phase for film formation, and by controlling the film forming precursors. (NEDO)

  5. FY 1997 report on the results of the industrial technology R and D project. Development of technology to use biological resources such as the complex biological system (Development of biological use petroleum substitution fuel production technology); 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Experimental researches were conducted and the FY 1997 results were reported with the aim of establishing analytical technology for the complex biological system by which the complex biological system can be analyzed in such a state as it is using the molecular biological method. In the study of the molecular genetic analytical technology, PCR primers used for amplification of topoisomerase II genes of the whole eukaryote was designed. As to the histochemical analytical technology, a study was made on the new constitution microorganism detection method by the hybridization method and the antibody specific dyeing method, and the following were conducted: manifestation in quantity of colibacillus and the recovery, refining, and construction of peptide library by fuzzy display method. Concerning the functional analytical technology, technological researches were made such as the environmental adaptation mechanism of high thermophile and the information transfer mechanism among bacteria through cell membranes for elucidation of the special environment detection/response mechanism and the special environment adaptation/resistance mechanism. As to the separation/culture technology, various anaerobic microorganisms were separated from marine sponge for the development of a method of culturing in 3D matrices. (NEDO)

  6. FY 1998 R and D of utilization of biological resources such as those in bioconsortia. Report on development results of techniques for utilization/production of organisms in bioconsortia; 1998 nendo fukugo seibutsukeinado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei riyo seisan gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The objectives are set to analyze functions and interactions of organisms having specific functions, to develop the techniques for isolating and cultivating the constituent organisms, and thereby to develop the techniques for their industrial utilization, in order to develop the techniques for handling organisms in bioconsortia as the techniques to utilize their functions, e.g., production and decomposition of materials, and also to develop the techniques for culturing/controlling microorganisms in bioconsortia and for strengthening their functions. The FY 1998 themes are development of the functional material production technology, and comprehensive study for the project. More concretely, the former includes histochemical analytical technology (development of techniques for detecting microorganisms in soil, and of techniques for in-situ detection/isolation of specific microorganisms in bioconsortia and for analysis their functions), isolation and culture technology (development of detection, separation and cultivation technology of microorganisms that are not easily cultured), functional substance production technology (technical utilization of microbial consortia for production of environment-friendly oil/water separation polymers), and functional material production technology (development of methods for artificial gene exchange in microbial consortia). (NEDO)

  7. Achievement report for fiscal 1997 on the development of technologies for utilizing biological resources such as complex biosystems. Development of technologies for producing substitute fuel for petroleum by utilizing organisms; 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Technologies of producing useful substances using the substance decomposing/producing functions of complex biosystems and methods of their handling are developed. In the utilization of microbes in the digestive tracts of termites and longicorns, it is made clear that several kinds of termites cleave the {beta}-O-4 ether linkage. In relation to technologies for wood decomposing complex microbial system construction and complex vector system development, a screening system is constructed in which strains that exhibit complex actions are combined. Concerning the advanced utilization of tropical oil plants, conditions are determined for inducing callus out of oil palm tissues. Out of oil palm sarcocarp tissues, mRNA (messenger ribonucleic acid) is isolated for the construction of a cDNA (complementary deoxyribonucleic acid) library. For the purpose of isolating a powerful promoter, a partial base sequence is determined for ubiquitin that frequently expresses itself in cells. A pathogenic bacterium ailing the oil palm is sampled for identification, and it is inferred that the bacterium is a kind of Ganoderma boninense. (NEDO)

  8. Fiscal 1997 survey report. Subtask 7 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (survey/study on the hydrogen utilization technology); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 7 suiso riyo gijutsu ni kansuru chosa kento

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described the 1997 results of the survey/study of the hydrogen utilization technology. As to the power generation system, trially calculated were effects of oxygen purity on efficiency of the argon circulating hydrogen diesel cogeneration, and the power generating efficiency in case of considering power separating oxygen from air. It was found that the power generating efficiency equal to or more than that of the existing diesel can be expected. In relation to means of transportation, the introduction was studied of hydrogen engine family cars and hybrid fuel cell micro-buses. Concerning oxygen/hydrogen use fuel cells, discussed was the power generation using fuel cells by night power use electrolytic hydrogen/oxygen production as well as fixed 200kw and 5000kw class fuel cells and three automobile use polymer fuel cells. As to the hydrogen supply system in model cities, studied were the control of boil-off gas generation and the effective use of the gas, the hydrogen receiving base, and a scenario for shifting to hydrogen energy systems. For a realistic shift to the hydrogen energy society, discussed was a standalone hydrogen supply station. 24 refs., 130 figs., 57 tabs.

  9. Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Electronic information technology field (Human process ware field for computers); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chsao hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku) denshi joho gijutsu bun'ya (computer kanren bun'ya no uchi, human process wear bun'ya)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a human process ware (HPW) field on electronic information. Although the current HPW industry is not yet complete, various technologies concerned are being stored, and the HPW industry is expected as new major industry for home and personal information equipment. As factors hindering technological innovation in Japan, the incomplete market, poor cooperation between industry and government, ambiguous role of university, and poor standardization were pointed out. Technology trends were analyzed to extract seed technology fields from 3 viewpoints of mobile HPW available at any time, at any place and to anybody, HPW system capable of customizing every personal use, and HPW supporting development of a creativity. As general strategy, the technology seed chart and map of technical development targets for every HPW were prepared to conceive a route to practical use, and develop element technologies required for practical use, based on the future trend of the market. (NEDO)

  10. Fiscal 1998 R and D project on global environmental industrial technology. Research result report on DNA analysis and information processing technology for photosynthesis microorganisms (Development of CO{sub 2} fixation and effective use technology by using bacteria and algae); 1998 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Kogosei biseibutsu nado DNA kaiseki joho shori gijutsu no kenkyu (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the fiscal 1998 research result on DNA analysis and information processing technology for photosynthesis microorganisms. On the study on DNA analysis technology by triple-strand formation method, as the comparison study result of a READ method, stable triple- strand formation method and hairpin method, a READ method showed the highest triple-strand formation efficiency for target DNA. On the study on accurate separation technology of specific genes, establishment of protocols was promoted for solid-phase probe technology, subtract technology and leveling technology. On the study on DNA microarray analysis technology by high-efficiency hybridization method, the analysis technology of genes by hybridization method using DNA chips is under investigation. In addition, the high- efficiency analysis technology of specific DNA segments by using an affinity sensor, and the high-accuracy cloning technology for DNA with altered primary structure were also studied. (NEDO)

  11. FY 1999 report on the results of the project on the industrial science technology R and D. Development of utilization technology of biological resources such as bioconsortium system (Development of the petroleum substituting fuel production technology using living organisms); 1999 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugou seibutsukei tou seibutsu shigen riyo gijutsu kaihatsu (Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of developing the technology for producing and degrading useful substances using bioconsortia, study was made of the handling technology of bioconsortia, the basic element technology, etc., and the FY 1999 results were reported. In the study of the high-grade utilization technology of lignocellulose/the components, an sample was obtained in which the effect of the bacteria culture supernatant treatment was recognized in the biobleaching by co-treatment of the bacteria culture filtrate - MnP. As to the search for control factor of lignin degrading enzyme and the utilization technology, it was found out that bisphenol A was efficiently degraded by a combination of laccase and mediator production bacteria. Concerning the utilization technology of plant symbiotic bacteria, classification/identification have been finished of approximately 60% of the stored bacteria. In the study of the production technology of the petroleum substituting useful resource, a system was constructed in which immature embryos were used for callus induction and regeneration of plantlets, and plants were regenerated at high frequency via the formation of adventitious embryos. By this, the culture cell with high propagation ability was obtained. (NEDO)

  12. FY 1999 report on the results of the project on the industrial science technology R and D. R and D of complex carbonhydrate production/utilization technology (Development of CO2 fixation/effective utilization technology by applying complex carbonhydrate); 1999 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo. Fukugo toushitsu seisan riyo gijutsu no kenkyu kaihatsu (Fukugo toushitsu oyo nisankatanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of making an industrial use of complex carbonhydrate performing an important function in substance recognition, etc., which cannot be realized by only nucleic acid, protein and lipid, the R and D of the basic technology related to the production/utilization were conducted, and the FY 1999 results were reported. In the study of synthesis/utilization/remodeling technology of complex carbonhydrate using the chemical synthesis method, the R and D were made not only on the synthesis of sugar chain but for the synthesis method of the peptide added with sugar chain, that is, glycopeptide. Further, as to the reaction with the aim of the application, there was hope for large-quantity synthesis of milk oligosaccharide by the oxygen method. In the study of the design technology of complex carbonhydrate molecules, the systematical analysis using the model glycopeptide was conducted of effects of the sugar chain addition part and sugar chain structure on the 3D structure and physiological activity. Concerning the synthesis/utilization/remodeling technology of complex carbonhydrate using the biological method, study was made of the animal cell utilization, microorganism utilization, technology of structural analysis of complex carbonhydrate, etc. (NEDO)

  13. Report on the achievements in fiscal 1999. Research and development on a basic technology to apply superconductivity (Development on an ultra high speed signal processing technology with low electric power consumption); 1999 nendo chodendo oyo kiban gijutsu kenkyu kaihatsu seika hokokusho. Teishohi denryoku chokosoku shingo shori gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    The development of a technology to design superconductive circuits has worked on (1) a circuit design technology and (2) fabrication of a small scale demonstration circuit. In Item (1), analog evaluation provided SN characteristics of 11 bits or more by using a primary Sigma-Delta ({sigma}-{delta}) modulator as the element circuit for an AD converter. In addition, a proposal was made on a decimation filter using a secondary {sigma}-{delta} module and a counter, which use a magnetic quantum multiplication element as feedback. In Item (2), fabricating conditions for an NBCO film were established with high Tc reproducibility. In addition to having established a design method for a superconductive filter, a technology was developed to deposit superconductive oxide conductors on both sides of an MgO substrate having a thickness of 0.5 mm. This development provided a prospect of realizing a filter for large electric power of 10 GHz and 10W class. In developing a technology for measuring superconductive circuit characteristics, discussions were given on a measurement and evaluation technology. To explain, with regard to the technology to demonstrate high speed actions, a high-speed action demonstration and measurement system was started up, which can be cooled down to 5K, and has small critical current variation due to magnetic flux trap. Output of SFQ signals up to 4 GHz was successfully detected. (NEDO)

  14. Fiscal 1998 R and D project on industrial technology. Development report on use technology of bioresources such as bioconsortia (Development of analysis technology of bioconsortia); 1998 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugo seibutsukeinado seibutsu shigen riyo gijutsu kaihatsu (fukugo seibutsukei kaiseki gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For use of advanced functions of bioconsortia (complex microorganisms composed of more than 2 microorganisms with certain specific function), this project analyzes specific functions of specific organisms and the interaction between the specific functions, and develops isolation and incubation technologies of component organisms. In fiscal 1998, to promote this project, the meetings were held frequently in National Institute of Bioscience and human Technology. Study was made on production of useful substances and useful degradation functions in association with bioconsortia. The result showed that microorganisms coexisting with nematode produced physiologically active substances exhibiting antimicrobial activities to tubercle bacillus, MRSA and others, microorganisms coexisting in eggs of some insects produced substances having antiviral activities and activities against pathogenic bacteria in a plant, and microorganisms growing in some plants or mycorrhiza organisms produced insecticidal substances or growing-promoting substance. The basic understanding was obtained on cooperative actions of bioconsortia to bioremediation and degradation of organic substances. (NEDO)

  15. FY 1999 New Sunshine Project survey research project - Survey on the long-term energy technology strategy, etc. Fundamental survey to decide on the industrial technology strategy - Technology strategy by field (Electronic information technology field - Human process ware technology field of the computer relation field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (denshi joho gijutsu bun'ya (computer kanren bun'ya no uchi, human process ware gijutsu bun'ya)))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The survey/study were conducted to contribute to proposing technology strategies such as the analysis of the present state of technical competitive force and the forecast in the human process ware industry technology field of the computer relation field. The human process ware is a system aimed at fermenting human power for thinking, problem solution and creation. Its main subjects are the following three: close society technology for will communication by automatically learning backgrounds of people joining the community; topics community technology for community formation for the appropriate people/organizations by grasping true topics/purposes from conversation; active interaction technology for supporting creative activities of users/community and making conversation with users. Further, in the region of the technology to meet the requests/restrictions from the society, the following are expected: energy/resource conservation; realization of the life with ease/safety and of high quality in the aged society; realization of the advanced information network society which becomes the basis of a new economic society. (NEDO)

  16. WE-NET substask 3. Conceptual design of the total system (City-level energy estimation and assessment); 1998 nendo suiso riyo kokusai clean energy system gijutsu (WE-NET). 3. Zentai system gainen sekkei (toshi kibo deno yosoku hyoka)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The effort of fiscal 1997 at isolating the best way to introduce a relatively small amount of hydrogen into urban fuel economy was carried over to fiscal 1998. In the research of fiscal 1998, comparison was made between Tokyo and London in connection with hydrogen introduction, and a transition scenario was proposed for introducing hydrogen into Tokyo. Models were built for Tokyo and London, and studied. The result of this study was different from that obtained in the previous study, and places the two cities under similar conditions. The difference is attributed to the rapid progress in the development of the fuel cell and to the resultant reduction in cost. It is inferred that, in consideration of the transportation situation, the introduction of pure hydrogen will be the most cost-effective for both cities at least for some time to come. According to the revised data, natural gas may be procured in Tokyo as in London but the size of supply available in Tokyo is fairly smaller than that in London. Several transition scenarios covering the period up to 2025 were subjected to discussion. (NEDO)

  17. Report on survey of international cooperation possibility on chemical CO2 fixation and utilization technology in FY 1997; 1997 nendo chosa hokokusho (kagakuteki CO2 koteika yuko riyo gijutsu ni kakawaru kokusai kyoryoku kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This survey focused on the end of the more promising companion and promoting the international cooperation on chemical CO2 fixation and utilization technology. As a result, the way of the carrying-forward of the international cooperation with more than one companion could be arranged beforehand. It led to getting an arrangement about a secrecy agreement respectively with Lurgi company and ABB company in Europe, and to providing a catalyst sample developed by RITE to implement an examination by the other party and to show related technical information. In addition, it concluded a cooperation agreement about a total system of the chemical CO2 fixation and utilization technology and methanol synthesis with ZSW. In Australia, negotiation about international cooperation with CSIRO which is a federal research organization and CRC (Cooperative Research Centre) for renewable energy has been started. The ideal circumstances are being ready for the chemical CO2 fixation project for which the international cooperation with the country where the natural energy is rich like Australia is essential when coming to practical use. To do alternating current with further high density in the following year it is desired to build a concrete study cooperation system. 1 fig., 4 tabs.

  18. Fiscal 1996 report on the environmentally friendly type coal utilization technology transfer project. Upstream field; 1996 nendo kankyo chowagata sekitan riyo gijutsu iten jigyo. Joryu bun`ya hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper reported training activities conducted in fiscal 1996 as an environmentally friendly type coal utilization technology transfer project (upstream field). For the purpose of supporting the introduction/spread of clean coal technology (CCT) in Asian and Pacific countries, the project invited engineers there to Japan, aiming at fermentation of the understanding of CCT and heightening in quality. In the manager training conducted in fiscal 1996 for managers from Indonesia, Thailand, the Philippines and China who are in charge of management of coal mines, management of coal preparation plants, and policy decision, the project had them deepen the understanding of CCT (coal preparation field). The engineers participated in the project were 6 from Indonesia, 2 from Thailand, 2 from the Philippines, and 10 from China. The training of about two weeks was conducted at Kyushu University, Wakamatsu coal utilization technology testing field of Electric Power Development Co., Mitsui Mining Co., Ikeshima Mining Works, Matsushima Thermal Power Plant, Mitsui Engineering and Shipbuilding Co., Idemitsu Kosan Co., NEDO Training Center, etc. 12 figs., 3 tabs.

  19. International Clean Energy System Using Hydrogen Conversion (WE-NET). subtask 3. Conceptual design of the total system; Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 3. Zentai system gainen sekkei

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This paper describes the research result on the conceptual design of the total system for the WE-NET project in 1996. Basic conditions are as follows: solid polymer water electrolysis, hydrogen combustion turbine power generation, hydrogen transport/storage through ammonia medium, power generation scale of 1000-4000MW (2-5 yen/kWh), and transport distance of 5000-20000km between supply and consumption places. The system efficiency was estimated to be 68% and 23% at an ammonia arrival time and power sending end, respectively, and it was dependent on a transport distance, while no power generation scale. The power cost was estimated to be 7 yen/Mcal and 33 yen/kWh, respectively. The system efficiency at a sending end was lower by 15% and 2% than that of the liquid hydrogen and methanol system, while the power cost was higher by 0 and 8 yen/kWh, respectively. It was necessary for loss reduction of this ammonia system to develop a new high-efficiency ammonia synthesis process, and hydrogen separation (decomposition/refining) process. 80 figs., 52 tabs.

  20. Fiscal 1996 verification survey of geothermal exploration technology. Development of the fracture type reservoir exploration method (development of the elastic wave use exploration method); 1996 nendo chinetsu tansa gijutsu nado kensho chosa. Danretsugata choryuso tansaho kaihatsu (danseiha riyo tansaho kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of exploring accurately fracture groups greatly restricting the fluid flow of geothermal reservoirs, technical development was made for applying the elastic wave exploration technology such as the high precision reflection method, VSP, elastic wave tomography to the geothermal exploration. The Okiri area, Kagoshima prefecture was selected as a demonstrative field of a typical type where the steep and predominant fracture rules the geothermal reservoir, and experiments were conducted using the high precision reflection method and VSP. Fracture models were made, and the analysis results were studied by a survey using the array CSMT/MT method and by a comparison with existing data. Reformation of the underground receiving system used for VSP and elastic tomography is made for improvement of its viability, and was applied to the VSP experiment. The treatment/analysis system of the core analyzer was improved, and cores of the demonstrative field were analyzed/measured. Further, the exploration results, core analysis results and existing data were synthetically analyzed, and fracture models of the demonstrative field were constructed. Also, effectiveness and viability of the elastic wave use exploration method were studied. 90 refs., 418 figs., 24 tabs.

  1. Research cooperation project in fiscal 1998. General report on research cooperation related to mine waste water treatment technology by utilizing biotechnology; 1998 nendo kenkyu kyoryoku jigyo. Bio riyo ni yoru kohaisui shori gijutsu ni kansuru kenkyu kyoryoku sokatsu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper describes cooperative development of bio-treatment technology for mine waste water generated by operating mines in China. Certain types of bacteria have capability to oxidize ferrous iron in the waste water into ferric iron ions. The bacteria cause ferric iron oxides in low pH regions to get deposited, and can remove them from sedimentation by using cheap calcium carbonate as a neutralizer. Volumetric reduction in waste sediments may also be achieved during removing heavy metals in a pretreatment process. Great advance may be expected in taking actions to prevent water quality contamination. This paper summarizes activities taken in fiscal 1998. Eight site surveys in total were carried out using 47 persons in total. Major activities included operation study guidance of a pilot plant, and surveys for measures on heavy metal generation sources in Wushan Mine. In addition, site surveys were performed at Dexing Mine and Yinshan Zinc Mine. Subsequently from fiscal 1997, a bench scale testing equipment used in Japan and consumables were transported to China. The operation study data on the pilot plant were put into order and analyzed. Concept design was also made on a waste water treatment facility for Wushan Mine. (NEDO)

  2. Fiscal 1997 report on the environment friendly type coal utilization technology transfer project. Downstream field; 1997 nendo gyomu hokokusho. Kankyo chowagata sekitan riyo gijutsu iten jigyo (karyu bun`ya)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of supporting the introduction/spread of clean coal technology (CCT) in countries in Asia and the Pacific, engineers of the countries concerned were invited to Japan aiming to ferment the understanding of CCT and improve abilities of them. The project was carried out by NEDO, and managed by CCUJ. It has two courses. The manager course is for policy makers, management and senior managers. By assessing CCT and presenting a menu for economical efficiency, environmental arrangement for CCT introduction is made in working out policies and planning plant/equipment investment in the future. The engineer course is for policy planners, mid-class managers and senior engineers. It proposes data on which to base a decision in working out/planning CCT facilities, and at the same time ideas by which to reduce environmental loads by management of facilities, simple improvements, etc. The number of the persons invited are 21, that is, 8 from China, 5 from Indonesia, 4 from the Philippines and 4 from Thailand. After the training, future subjects were summed up

  3. Fiscal 1996 verification survey of geothermal exploration technology. Development of the fracture type reservoir exploration method (development of the elastic wave use exploration method); 1996 nendo chinetsu tansa gijutsu nado kensho chosa. Danretsugata choryuso tansaho kaihatsu (danseiha riyo tansaho kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of exploring accurately fracture groups greatly restricting the fluid flow of geothermal reservoirs, technical development was made for applying the elastic wave exploration technology such as the high precision reflection method, VSP, elastic wave tomography to the geothermal exploration. The Okiri area, Kagoshima prefecture was selected as a demonstrative field of a typical type where the steep and predominant fracture rules the geothermal reservoir, and experiments were conducted using the high precision reflection method and VSP. Fracture models were made, and the analysis results were studied by a survey using the array CSMT/MT method and by a comparison with existing data. Reformation of the underground receiving system used for VSP and elastic tomography is made for improvement of its viability, and was applied to the VSP experiment. The treatment/analysis system of the core analyzer was improved, and cores of the demonstrative field were analyzed/measured. Further, the exploration results, core analysis results and existing data were synthetically analyzed, and fracture models of the demonstrative field were constructed. Also, effectiveness and viability of the elastic wave use exploration method were studied. 90 refs., 418 figs., 24 tabs.

  4. FY 1998 result report. Research/development on the energy overall development/utilization technology of gas hydrate resource; 1998 nendo seika hokokusho. Gas haidoreto shigen no energy sogo kaihatsu riyo gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This study is aimed at studying for survey of gas hydrate (GH) deposit required for GH resource development and gathering of it, and further at studying for industrial utilization technology development of GH which is different in formation condition depending on kind of gas with which it reacts. The results of FY 1998 are as follows. In the study of the situation of existence of gas hydrate in the tundra, the sedimentary environment of the tundra where natural gas hydrate exists was simulated in laboratory to measure thermal conductivity of the sediments including GH. In this fiscal year, design/fabrication/calibration were conducted of the GH synthesizer and thermal analyzer. In the study of GH gathering technology in the tundra, a technology is discussed for recovering gas from GH layer and at the same time substituting CO2 hydrate for GH by blowing CO2 into the geologic layer. In FY 1998, formation/dissociation behaviors were first studied of methane/CO2 mixture hydrate. For the overall energy development of GH resource and promotion of R and D of the utilization technology, studies were made on physical properties of GH and development of the usage. (NEDO)

  5. Fiscal 1998 research report on information structuring technology for advanced use of NEDO research reports; 1998 nendo NEDO seika hokokusho nado no kodo riyo ni hitsuyona joho kozoka gijutsu no chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research was made on electronic NEDO research reports corresponding to the recent extending trend of Internet. The logical structure and electronic format of NEDO research reports as document were first studied considering document disclosure and reuse of technical information. HTML as electronic format for Internet is unfortunately insufficient to describe the logical structure of NEDO research reports because of HTML's restricted description. Thus, XML which is being watched because of its possible definition of original tags was studied in place of HTML. As a result, because at present preparation of standards on XML and a compatibility for implementation of standards are insufficient, it was concluded that construction of the electronic document system for NEDO research reports is still too early. However, since adoption of XML as document format is important from the viewpoint of a property succession on Internet, preparation of the XML format file of NEDO research reports is essential. (NEDO)

  6. International Clean Energy System Using Hydrogen Conversion (WE-NET). subtask 2. Research study on promotion of international cooperation; Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 2. Kokusai kyoryoku suishin no tame no chosa kento

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This paper describes the research result on promotion of international cooperation in the WE-NET project in fiscal 1996. The WE-NET project aims at development of the total system for hydrogen production, transport, storage and utilization, and construction of the earth-friendly innovative global clean energy network integrating elemental technologies. Since the standpoint is different between latent resource supplying countries and technology supplying countries, the WE-NET project should be constantly promoted under international understanding and cooperation. The committee distributed the annual summary report prepared by NEDO to overseas organizations, and made positive PR activities in the 11th World Conference and others. The committee made the evaluation on the improvement effect of air pollution by introducing a hydrogen vehicle in combination with Stanford University, and preparation of PR video tapes for hydrogen energy. Preliminary arrangement of Internet home pages, establishment of a long-term vision for international cooperation, and proposal toward the practical WE-NET are also made. 9 figs., 13 tabs.

  7. Synthesis of inorganic mesopore materials and their application to control chemical reactions; Muki meso kukan zairyo no gosei to kagaku hannoba to shite no riyo gijutsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Ohashi, F.; Tomura, S.; Maeda, M.; Inukai, K.; Suzuki, M.; Okazaki, M.; Konishi, Y.; Toriyama, K. [National Industrial Research Institute of Nagoya,Nagoya (Japan)

    2000-10-25

    Materials enabling 'intelligent humidity control' were synthesized by using fumed silica, tetraethylorthotitanate, and a surfactant (alkyltrimethylammonium bromides (C{sub n}H{sub 2n+1}(CH{sub 3}){sub 3}N{sup +} (center dot) Br{sup -}, n=10 - 16) as a liquid-crystal template) under a hydrothermal condition. A homogeneous hexagonal structure of SiO{sub 2}-TiO{sub 2} was confirmed from X-ray diffraction analysis and TEM observation. These products had a high BET surface area of 540-863m{sup 2}/g and auniform pore diameter of 1.5-3nm, both of which were controlled by varyingthe size of the organic template molecule. A sharp increase in water adsorption was observed when the relative pressure (P/Po) increased in the range 0.4 - 0.6. Over this region, the weight % of water came in the range 20 - 50mass%. The water vapor adsorption isotherm was classified as type V in the IUPAC notation, which is characteristic of an unusually large hysteresis. This large hysteresis can be explained from the fact that the contact angle depends on whether water is being adsorbed or desorbed. High durability in their humidity-control ability was confirmed from repeated observation of the isotherm. As a characteristic of the chemical structure upon titanium incorporation, a wider distributionof the Si-O-Si angles in the SiO{sub 4} tetrahedra was indicated from the broad Q{sup 4} {sup 29}Si-MAS/NMR spectra with a small peak shift. To clarify the formation process of these mesoporous materials in the template-synthesis, we accumulated the basic parameters of micelles from the product-yield-detected ESR observations. In addition, as a model of the chemical reaction in the mesoporous material, we observed the reaction dynamics in a spherical micelle with the same technique Based on these preliminary experiments we designed a column reactor packed with a me soporous material to control the liquid phase reaction. (author)

  8. Development of hydroponic system using agricultural waste. 2. Utilization of ozone for sterilization of nutrient solution; Suiko saibai ni okeru haikibutsu riyo gijutsu no kaihatsu. 2. Ozone ni yoru baiyoeki sakkin ni kansuru kento

    Energy Technology Data Exchange (ETDEWEB)

    Terazoe, H.; Yoshihara, T.; Nakaya, K. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1995-08-01

    Discussions were given on a sterilizing effect of ozone on Fusarium bacteria in hydroponic culture, and its effect on components in the culture solution. In an experiment, dry air with O3 concentration of 3.5 ppm was sent into aqueous solution inoculated with Fusarium bacteria at a flow rate of 5 liters per minute. The Fusarium bacteria was sterilized nearly completely in about five minutes. No change was observed in pH, EC and dissolved oxygen concentration of the O3-treated culture solution. However, iron and manganese among the soluble components have been oxidized by O3 and precipitated, hence these components must be added after the O3 treatment. In spinach culture performed on a culture medium inoculated with Fusarium bacteria, ozone water containing dissolved O3 at 0.8 ppm was flown into a urethane foam medium and vegetable roots. This treatment has resulted in reduction of the number of strains occurred with a wilt symptom below that in the section flown with distilled water. The spinach has grown normally without showing an effect of the ozone water. 15 refs., 10 figs., 3 tabs.

  9. Feasibility study of international cooperation on the chemical CO2 fixation and effective utilization technology in FY 1996; 1996 nendo kagakuteki CO2 koteika yuko riyo gijutsu ni kakawaru kokusai kyoryoku kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In this survey, candidate organizations to cooperate internationally in the development of chemical CO2 fixation technologies have been selected, and possible forms of the cooperation each organization would participate in have been examined. The chemical CO2 fixation technology project of RITE (Research Institute of Innovation Technology for the Earth) involves the essential themes of CO2 separation membrane technology, catalytic hydrogenation reaction technology, and hydrogen production/supply technology, as well as the overall system. Through the arrangement, 19 international research institutes were selected as the potential candidates for international research cooperation. Either direct visit or questionnaire by mail was conducted to these institutes. The purposes of international cooperation in each of essential study theme are to review the possibility of improving technologies in each theme by introducing new technologies, and to review the possibilities of promoting practical implementation of chemical CO2 fixation system. The research institutes to be reviewed as partners for joint research are summarized. 10 figs., 16 tabs.

  10. International Clean Energy System Using Hydrogen Conversion (WE-NET). subtask 3. Study on the global network; Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 3. Global network kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    As a part of the WE-NET project, the introduction condition of hydrogen as substituting energy and CO2 reduction effect were analyzed using a global energy model. The WE-NET project aims at global-wide introduction of clean energy by converting abundant renewable clean energy into hydrogen transportable to distant consumers all over the world. The study result in fiscal 1996 is as follows. Undeveloped hydroelectric resources in the world are estimated to be 12 trillion kWh/y equivalent to the existing developed one in the world. Since the cost of the hydroelectric power generation projects over 1000MW in the planning stage is estimated to be 0.02-0.05$/kWh lower than that of other renewable energies, such projects are expected as energy source in the initial stage of the practical WE-NET project. The GREEN model was modified by adding a hydrogen analysis function, and extending an analysis period. The modified model allowed evaluation of the long-term important role of hydrogen energy, in particular, the capability of CO2 gas reduction all over the world. 28 refs., 92 figs., 56 tabs.

  11. FY 1998 annual report on the survey on development, introduction and promotion of urban type multipurpose geothermal utilization techniques; 1998 nendo toshigata tamokuteki chinetsu riyo gijutsu no kaihatsu, donyu, sokushin ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Introduction of geothermal heat pump systems, which depend on temperature differential, is investigated for urban areas, which have large energy demands. Results of the surveys on the current situations of geothermal heat pump (GHP) systems indicate that they have already numbered 300,000 units in USA and totaled more than 50,000 units in Switzerland and Northern European countries, and that they are increasing at an annual rate of higher than 10%. The results also indicate that introduction of these systems are well feasible in Japan, which generally has better topographical conditions than American and European countries, and the GHP system with vertical ground heat exchanger is investigated for its topographical and environmental considerations. These systems could annually abate approximately 52 million tons of CO2 (4.3% decrease), if disseminated to all households. They are also expected to help control the heat island phenomenon, and reduce peak power consumption. The technological problems to be solved before these systems are massively disseminated including development of small scale drilling rigs and preparation of drilling manuals. System standardization and introduction of subsidy systems are also needed to massively disseminate these systems. (NEDO)

  12. Fiscal 1995 survey of the base arrangement promotion for foreign coal import. Investigation on the policy of coal demand stabilization using low grade coal; 1995 nendo kaigaitan yunyu kiban sokushin chosa. Teihin`itan riyo ni yoru sekitan jukyu anteika hosaku ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper investigated the trend of and the needs for low grade coal utilization and the seeds of low grade coal utilization technology and studied usability of low grade coal in the future. Importance of low grade coal utilization was described in consideration of features of the Asia/Pacific area in the world coal market, and the trend of production/utilization of low grade coal was examined mostly in countries holding main low grade coals in the Asia/Pacific area. The trend of the technical development contributing to the low grade coal utilization was studied to make it contribute to the extraction of technologies which are regarded as effective in the Asia/Pacific area. A study was made of applicability of the low grade coal utilization technology corresponding to the needs for low grade coal utilization, and at the same time, a study was made of the effect on the coal supply/demand in the Asia/Pacific area in case the low grade coal utilization is promoted helped by the study. Focusing on technical cooperation relating to clean coal technology, a study was conducted of the trend of international cooperation in Japan and various overseas countries and the trend of new cooperation in private sectors, and a discussion was made on how Japan should act toward promotion of low grade coal utilization. 12 figs., 91 tabs.

  13. FY 1999 report on the results of the R and D of the global environmental industry technology. R and D of the CO2 fixation/effective use technology using bacteria/algae; 1999 nendo saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of developing the technology to fix CO2 and recycle it as resource in higher efficiency than that in photosynthesis in the nature world, study of bacteria, etc. was made in terms of the search, breeding, and artificial realization of the growth environment, etc. The FY 1999 results were summed up. As to high efficiency photosynthetic bacteria/microalgae, conditions for sampling/breeding/optimum culture of bacteria were established and made database. From conditions for the optimum CO2 fixation by photosynthetic bacteria, oxygen injury prevention culture method, continuous culture experiment, etc., it was found out that the carbyne cycle was a main route of the carbon fixation also in photosynthetic bacteria. As to the cell fusion, established were the technology of electric fusion of interspecific fusion strains and the technology of evaluation of growth characteristics. Also studied was a method to transfect genes into Chlorella sp. which fixes CO2. Concerning the light collecting reactor of 200L scale, a high concentration culture experiment was carried out using Chlorella sp. UK001 as the strain tested, and the engineering data on the behavior in culture tank, multiplication speed, etc. were collected. (NEDO)

  14. Industrial technology research and development project for global environment in fiscal 1998. Report on achievements in research and development of technologies for fixation and effective utilization of carbon dioxide by utilizing bacteria and algae; 1998 nendo saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Microorganisms are cultivated industrially in a great quantity to fix CO2 at efficiency higher than that of photosynthesis in natural world to develop technologies to re-utilize them as resources. This paper describes achievements in fiscal 1998. Existing strain samples of photosynthesized bacteria and micro-algae were screened to continue discussions on optimal culture conditions, and evaluation on properties. Genes that provide Chlorella with antibiotic resistance were introduced to have performed evaluation on function manifestation, and acquired enzymatic genes of unsaturated {omega} 3. Using green algae as the object, reduction in the processing time has resulted in acquiring a large number of fused cell colonies. Discussions were given on conditions to breed photosynthesized bacteria and fix CO2. Structural analyses were performed on CA protein as an enzyme related to take CO2 into living organisms, and on genes. Developments were carried out on a photosynthesizing bio-reactor and useful substance producing technologies on a continual basis. A 200-liter scale light collection type bio-reactor improved the fixing capacity by 30% in Chlorellas by changing the culture medium. The direct light receiving panel type bio-reactor can utilize even scattered light, with its fixing capacity per installation area exceeding the target. Fundamental data were acquired with Chlorellas on utilizing feeds, fertilizers and building materials. (NEDO)

  15. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO (book on the handling / gas lift system). Report on the results of the R and D of the overall base technology of ocean resources (R and D of submarine oil drilling technology, etc.); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shine Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kaiyo shigen sogo kiban gijutsu no kenkyu kaihatsu (kaitei sekiyu kussaku gijutsu nado kenkyu kaihatsu) seika hokokusho (handling / gas lift system hen)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper conducted a R and D on the handling of drilling equipment in drilling/collecting of submarine oil and the gas lift of artificial oil extraction technology. As to each equipment of a barge style handling system, conducted were assembly/adjustment/trial run on land and pipe handling experiments on sea. In the experiment, confirmed were pipe transfer function, lifting function, fitting function, grasping function, etc. In the ocean experiment, studied were pipe bending stress, Karman vortex control effects, etc. Relating to the gas lift system, experiments were made on confirmation of fabrication/performance of air compressor. Moreover, a technique of air transportation to the blowing inlet of the gas lift pipe was established by developing an air blowing system and fabricating a long-distance flexible pipe. Concerning the gas/liquid/solid three-phase separator, a cyclone separator was developed, and improvement in lifting efficiency was confirmed. Helped by these, the problems of the gas lift system were almost solved, and a possibility of the commercial-base production system was obtained. 2 refs., 182 figs., 47 tabs.

  16. Fiscal 1997 survey report. Subtask 4 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (development of hydrogen production technology); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 4 suiso seizo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As a WE-NET subtask, a study has been conducted of the solid polyelectrolyte water electrolysis method by which higher efficiency and lower cost hydrogen production is expected than in the conventional hydrogen production method. Production methods of electrode, electrolyte, etc. were studied. In the electroless plating method, the manufacturing process of membrane-electrode assemblies was realized in a large area of 2500 cm{sup 2} by the porous-surfaced method by studying manufacturing conditions for slurry membrane/membrane assembly/electroless plating processes. In the hot-press method, the refining degree and dispersibility of iridium dioxide powder were studied to improve characteristics of anode catalyst. A method was developed to form polyelectrolyte coatings homogeneously on the surface of electrode layer catalytic powder, and a large area of 2500 cm{sup 2} was realized. Beside the performance test using large single cells, FS was conducted to discuss optimum operating conditions and optimum structures of plants. Both methods indicated the performance exceeding the energy conversion efficiency of 90%, a WE-NET target, at current density of 1A/cm{sup 2} and electrolysis temperature of 80degC. A key was found to a bench-scale development (electrode area of 2500 cm{sup 2}, about 5 layers) to be planned in fiscal 1998. 136 figs., 50 tabs.

  17. Fiscal 1996 report on the results of the R and D of technology of high-level treatment/effective use of domestic/industrial wastes, etc. (for public); 1996 nendo Shin Energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku seikatsu sangyo haikibutsu shori yuko riyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of reducing environmental loads of waste and effectively using resource by waste recycling, a study was conducted of high-level treatment/effective use technology for domestic/industrial wastes, etc. The paper reported the results of fiscal 1996. In the EcoCement producing technology using the synthetic urban type waste, EcoCement with stable quality was obtained using sewage sludge and industrial waste as raw materials. In the specified freon decomposition disposal technology, an experiment was carried out on durability, etc. of the processing unit. In the high speed/reduced smell biological garbage disposal technology, technology of fermenting disposal, etc. were established, and at the same time technology of making garbage compost was developed. In the technology to manufacture environment friendly type plastic containers, etc., a degradation behavior was grasped of degradable plastics in the compost. In the spread type waste plastic/thermal recycle technology, studied were a system to collect waste and a system to make waste solid fuel. Technology to recycle coolant freon was studied. 14 refs., 261 figs., 137 tabs.

  18. Fiscal 1998 research report on International Clean Energy Network using Hydrogen Conversion (WE-NET). Subtask 2. Research on promotion of international cooperation (research on standardization of hydrogen energy technologies); 1998 nendo suiso riyo kokusai clean energy system gijutsu (WE-NET) sub task. 2. Kokusai kyoryoku suishin no tame no chosa kento (suiso energy gijutsu hyojunka ni kansuru chosa kento)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the fiscal 1998 research result on the basic research on standardization of hydrogen energy technologies, and ISO/TC197. As for the standardization, in relation to the hydrogen station in the WE-NET second phase research, the laws related to handling of gaseous hydrogen, and the basic issues on facility and safe handling were studied. As for ISO/TC197, the following draft standards were examined: Fuel supply system interface for liquid hydrogen vehicles, fuel tank for liquid hydrogen vehicles, container for liquid hydrogen transport, specification of hydrogen fuel, hydrogen fuel supply facility for air ports, gaseous hydrogen and hydrogen mixture fuel system for vehicles, gaseous hydrogen fuel connector for vehicles, gaseous hydrogen fuel tank for vehicles, and basic items for hydrogen system safety. Final examination of the fuel supply system interface for liquid hydrogen vehicles, and the specification of hydrogen fuel was finished, and these are scheduled to be registered for ISO. (NEDO)

  19. Fiscal 1997 report on the results of the introductory R and D of the New Sunshine Project under a consignment from NEDO. Introductory R and D of the supercritical fluid use technology; 1997 nendo `New Sunshine keikaku` sendo kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chorinkai ryutai riyo gijutsu sendo kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The R and D of chemical reaction using supercritical fluids started in fiscal 1997. In the R and D of solvent reaction, as the research on polymer decomposition with supercritical water, studies were conducted of the mechanism of conversion reaction to chemical materials, cleavage mechanism of stable chemical bonds, and synthetic reaction in the supercritical state reaction field. In the research on oxidation reaction, as the study of complete oxidation in supercritical water for high efficiency energy recovery, studies of complete oxidation of liquid fuels, and complete oxidation of solid fuels. In the research on hydrogenation, studies of lightening of heavy oil in supercritical water, etc. In the R and D of the basic technology, studies of corrosion mechanism of metals in supercritical water, construction of the basic framework for technical database of supercritical fluids, etc. In the survey of technical trends and new research themes, the introductory R and D of element technology, etc. were conducted, and the results were described of the survey of technical trends and new research themes and the trend survey of overseas technology. 314 refs., 87 figs., 81 tabs.

  20. Report on New Sunshine Program-supported undertakings for fiscal 1997. Development of hot water power plant and deep-seated geothermal resources sampling/exploiting technologies; 1997 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu, shinbu chinetsu shigen saishu gijutsu no kaihatsu, shinbu chinetsu shigen seisan gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Reported are the results of researches conducted in fiscal 1997. In the field of PTSD (Pressure, Temperature, Spinner flowmeter, fluid Density) well logging, the high-temperature performance of a memory type PT (Pressure, Temperature) well logger is confirmed in a demonstration test. As for the S-probe, modification is effected for the reduction of the outside diameter from 70mm to 56mm, and tests are conducted in real wells. As for the D-probe, a laboratory test is conducted and then the probe behaves as predicted. In the field of PCT (Pressure, Chemical, Temperature) monitoring, the sampler is subjected to an on-site test in Italy, when water is successfully sampled out of the well. In the field of scale monitoring technique, deep-seated fluid is collected and examined, and the scale deposition rate in the deep-seated fluid is determine. For the study of production control technology with respect to scale prevention and removal, an Mg-Si scale synthesis test is conducted in the temperature range of 100-300degC, and it is found that the solubility of scale decreases with a rise in temperature. 19 refs., 93 figs., 24 tabs.

  1. Fiscal 1997 report on the results of the introductory R and D of the New Sunshine Project under a consignment from NEDO. Introductory R and D of the supercritical fluid use technology; 1997 nendo `New Sunshine keikaku` sendo kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chorinkai ryutai riyo gijutsu sendo kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The R and D of chemical reaction using supercritical fluids started in fiscal 1997. In the R and D of solvent reaction, as the research on polymer decomposition with supercritical water, studies were conducted of the mechanism of conversion reaction to chemical materials, cleavage mechanism of stable chemical bonds, and synthetic reaction in the supercritical state reaction field. In the research on oxidation reaction, as the study of complete oxidation in supercritical water for high efficiency energy recovery, studies of complete oxidation of liquid fuels, and complete oxidation of solid fuels. In the research on hydrogenation, studies of lightening of heavy oil in supercritical water, etc. In the R and D of the basic technology, studies of corrosion mechanism of metals in supercritical water, construction of the basic framework for technical database of supercritical fluids, etc. In the survey of technical trends and new research themes, the introductory R and D of element technology, etc. were conducted, and the results were described of the survey of technical trends and new research themes and the trend survey of overseas technology. 314 refs., 87 figs., 81 tabs.

  2. International Clean Energy System Using Hydrogen Conversion (WE-NET). subtask 3. Conceptual design of the total system (safety measures and evaluation technology); Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 3. Zentai system gainen sekkei (anzen taisaku hyoka gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Safety measures and assessment technology were studied for the WE-NET project. As the study result in fiscal 1996, the information on safety design, anomaly and accident was collected and arranged. The information on safety measures, ideology and criterion was also collected by visiting some domestic and overseas organizations experienced about handling of liquid hydrogen (LH). The initial survey was made for the safety design ideology, analytical technique and disaster preventive measures of LNG systems as the similar cold liquid system. Accidents and explosion accident of a hydrogen production plant (water electrolysis) in Germany were analyzed. Events on storage tanks and leakage around the tanks were studied as typical risk of LH considering temporary and LNG system design information. The model based on the LH spillage test result and 3-D dispersion of vapor cloud were prepared by modifying a simulation code. The model allowed evaluation of the effect of explosion and fire accidents of compressed hydrogen gas and flying fragments on structures and people, and visual display of distances from a tank and damage conditions. 19 refs., 29 figs., 18 tabs.

  3. Development of fiber product recycling technology in fiscal 1998. Achievement report on 'technological development in relation with regeneration and utilization of wool fibers'; 1998 nendo sen'i seihin recycle gijutsu kaihatsu seika hokokusho. Wool sen'i no saisei oyobi riyo ni kansuru gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    With an objective to develop products of regenerated wool made by utilizing used clothes, and enhance the added value thereon, research and development has been made. In using the recovered suits as the regenerated resources, discussions were given on performing primary mechanical classification before carrying out rag opening and crushing. As a result, it was discovered that the classification is possible if such facilities as electrostatic devices and air-blowing separators are used. However, the secondary classification was difficult either by manual or mechanical means because the opened and crushed materials must be divided according to the original materials. In the research of the re-commercialization technology, discussions were given on developing the applications of felt products (non-woven fabrics) occupying the majority of consumption of wool materials recovered from suits, and of spun yarns utilized in cotton fabrics. As a result, it was discovered that the recovered wool materials can be made into products having features not available in conventional mops, if their feature of oil absorbing performance is made of the best use. Furthermore, researches were made on wool as a synthetic leather material that utilizes the protein constituent being the wool constituting substance. (NEDO)

  4. FY 1999 development of a technology to recycle fabric products. Development of recycle technology for wool products and use of reclaimed fiber; 1999 nendo sen'i seihin recycle gijutsu kaihatsu seika hokokusho. Wool sen'i no saisei oyobi riyo ni kansuru gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Experimental equipment was fabricated and an experiment was carried out to evaluate the performance of recycle wool heat insulating materials. In the test on the performance of ordinal housing use heat insulating materials, used was JIS A 1420 'heat insulation measuring method for architectural use structural materials.' The heat insulating material of 910 x 1,820mm in size was used according to the size of the construction material. The experimental equipment was fabricated with the 'method of calibration heat box with a small heating area' described in JIS A 1420 Attachment B as reference, and the size is 300 x 300mm. In the experiment, the following results were obtained. Even in the case of using a specimen smaller in size than 900 x 900mm, it is possible to make the relative insulation evaluation. The recycle wool heat insulating materials have the heat insulation equivalent to or more than the glass wool heat insulating materials. Further, even if they are equal in weight, the thicker the material is, the higher the heat insulating performance becomes. The recycle wool heat insulating material has moisture absorption/release against the environmental humidity the same as wool does. Changes in environmental humidity have effects on the performance of heat insulating materials. How influential the environmental humidity is depends on characteristics of material. (NEDO)

  5. Worldwide clean energy system technology using hydrogen (WE-NET). subtask 5. Development of hydrogen transfer and storage technology (research and development of technologies for hydrogen transport and storage by hydrogen absorbing alloys); Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 5. Suiso yuso chozo gijutsu no kaihatsu (bunsan yuso chozoyo suiso kyuzo gokin no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report describes a guiding principle of new hydrogen absorbing alloy design, case studies on the stationary hydrogen storage systems for multiple dwelling houses using hydrogen absorbing alloys and on the hydrogen fuel tank systems for a motor vehicle, and survey on development status in the world. As a result of the investigation of alloys, it was concluded that realization of hydrogen absorbing alloys with new target properties of the WE-NET Project is not easy through the current technology. It was found that two kinds of Mg-based and V-based high capacity materials must be selected as target alloys among current alloys, and that three techniques, i.e., ultra-fine microstructure, composite, and amorphousness, are effective for improving the hydrogen discharge property which has been a problem of these alloys. It was desired that the latest techniques are established by integrating these materials and techniques. It is necessary to promote the development of brake-through new materials by new concepts and technologies through the cooperation of national institutes, universities, and companies. 124 refs., 56 figs., 11 tabs.

  6. Report on New Sunshine Program-supported undertakings for fiscal 1995. Development of hot water power plant and deep-seated geothermal resources sampling/exploiting technologies; 1995 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (shinbu chinetsu shigen saishu gijutsu no kaihatsu, shinbu chinetsu shigen seisan gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Reported are the results of researches conducted in fiscal 1995. For the formulation of a general development design, data are collected about domestic high-temperature thermal wells through questionnaires and literature probing, and are scrutinized. As for the development of logging technology, a memory type PT (Pressure, Temperature) logger is experimentally constructed, and is found to properly operate in an environment of up to 350degC in a production well. An experimentally manufactured S-probe proves to be capable of heat insulation and sealing. In the field of PT monitoring, a high-temperature optical fiber is experimentally fabricated for study, capable of measuring temperatures up to 400degC. As for the development of high-temperature tracer monitoring technology, basic experiments are conducted about the thermal characteristics of aromatic acids, and preparatory experiments about gas phase tracers. In the study of scale monitoring technology, deep-seated fluids are collected and analyzed. In the field of production control, technical problems are discussed and information is gathered centering on methods for scale prevention and removal. 31 refs., 90 figs., 40 tabs.

  7. Fiscal 1997 survey report. Subtask 3 (hydrogen utilization worldwide clean system technology) (WE-NET) (total system conceptual design/safety measures/evaluation technology); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 3 zentai system gainen sekkei - anzen taisaku hyoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Concerning the study of safety measures in WE-NET, the paper described the fiscal 1997 results. For drawing up a policy for safety design, technology of preserving hydrogen at high temperature/pressure, continuing collecting information on existing plants (liquid hydrogen, LNG). Investigating manuals of NASA and NASDA and also referring to people`s opinions at chemical plants, etc., the study entered into the setting-up of the safety policy and design standards. Examples of anomalies/accidents were extracted, and classification/arrangement were commenced of the measures for anomalies of detection/prevention/protection. Toward the diffusion of hydrogen and the enhancement and unification of explosion/fire simulation models, the extraction of problems has been almost finished. The second mini work shop on safety was held in the U.S., and exchanges of information were made among researchers of each country. All agreed on the importance of collecting data as the base of safety standards. As to safety measures in various tests using combustor evaluation experimental facilities, experimental equipment for materials under liquid hydrogen and experimental equipment of thermal insulation under liquid hydrogen, problems were extracted between researchers and people concerned with safety measures, and the measures to solve them were studied. 18 refs., 31 figs., 10 tabs.

  8. Achievement report for fiscal 1997 on the development of technologies for utilizing biological resources such as complex biosystems. Development of complex biosystem analyzing technology; 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei kaiseki gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The aim is to utilize the sophisticated functions of complex biosystems. In the research and development of technologies for effectively utilizing unexploited resources and substances such as seeweeds and algae, seaweeds are added to seawater to turn into a microbial suspension after the passage of two weeks, the suspension is next scattered on a carageenan culture medium, and then carageenan decomposing microbes are obtained. In the research and development of technologies for utilizing microbe/fauna-flora complex systems, technologies for exploring and analyzing microbes are studied. For this purpose, 48 kinds of sponges and 300 kinds of bacteria symbiotic with the sponges are sampled in Malaysia. Out of them, 15 exhibit enzyme inhibition and Artemia salina lethality activities. In the development of technologies for analyzing the functions of microbes engaged in the production of useful resources and substances for animals and plants, 150 kinds of micro-algae are subjected to screening using protease and chitinase inhibiting activities as the indexes, and it is found that an extract of Isochrysis galbana displays an intense inhibitory activity. The alga is cultured in quantities, the active component is isolated from 20g of dried alga, and its constitution is determined. (NEDO)

  9. Fiscal 1997 survey report. Subtask 9 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (survey/study on the innovative and leading technology); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 9 kakushinteki, sendoteki gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of giving useful suggestions/proposals to the course of WE-NET and contributing to the R and D, conducted were survey/collection/evaluation of new technologies. The paper described the fiscal 1997 results. The number of the proposals of new technology accumulated during fiscal 1993 to 1997 is 28. The proposals of new technology made in fiscal 1997 are hydrogen production effectively using solar energy by wavelength zone, hydrogen storage using fullerene, and the methanol power generation turbine system. Four technologies proposed in fiscal 1996 and 1997 were evaluated. The evaluation method requires two steps of the marking using the analytic hierarchy process (AHP) and the adjustment by the committee. The highly evaluated proposals out of those having been made were analysis/evaluation of hydrogen-oxygen internal-combustion Stirling engine, hydrogen production effectively using solar energy by wavelength zone, hydrogen production by solid oxide electrolysis, magnetic refrigeration method for hydrogen liquefaction, hydrogen production technology using photocatalyst, etc. The paper also stated the result of studying concepts of innovative/leading technologies in fiscal 1996. 4 figs., 29 tabs.

  10. International Clean Energy System Using Hydrogen Conversion (WE-NET). subtask 2. Research study on promotion of international cooperation (standardization of hydrogen energy technology); Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 2. Kokusai kyoryoku suishin no tame no chosa kento (suiso energy gijutsu hyojunka ni kansuru chosa kento)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This paper describes the basic study on standardization of hydrogen energy technology, and the research study on ISO/TC197 in fiscal 1996. As a part of the WE-NET project, the subtask 2 aims at preparation of standards necessary for practical use and promotion. Developmental states in every field of hydrogen energy technologies, current states of domestic/overseas related standards and laws, and needs and issues of standardization were surveyed. In particular, the needs and issues were clarified in relation to existing standards and laws from the viewpoint of specific hydrogen property. ISO/TC197 was established in 1989 for standardization of the systems and equipment for production, storage, transport, measurement and utilization of hydrogen energy. Four working groups are in action for the supply system and tank of liquid hydrogen fuel for automobiles, the container and ship for complex transport of liquid hydrogen, the specifications of hydrogen products for energy, and the hydrogen supply facility for airports. The draft international standards were proposed to the international conference in 1996. 16 refs., 21 figs., 41 tabs.

  11. Development of coal liquefaction technologies (Part 3); Development of common base techniques (Part 4). Development and employment of evaluating approach to liquefied process. Development of data collecting and processing system for coal liquefaction process and etc. Sekitan ekika gijutsu kaihatsu (3); Kyotsu kiban gijutsu no kaihatsu nado (4). Ekika process no hyoka shuho no kaihatsu, unyo. Sekitan ekika process nado no data no shushu, Shori system

    Energy Technology Data Exchange (ETDEWEB)

    1989-09-01

    This research aims to develop the management system of informations concerning coal liquefaction process and etc., to develop data collecting and processing system on pilot plant and supporting researches and to effectively use data to advance to following step such as conceptural design for the demonstration plant. In addition, this research aims to collect many kinds of techniques obtained by the research and development and to arrange and promote the licensing system to practically use this system. Practical results in 1988 were as follows: Conceptural design on basic data base and retrieval or look up system on general technical informations were carried out to develop the data base system for coal liquefaction and to develop the data collecting and processing system for the coal liquefaction process and etc. Data locative leveling was carried out as the conceptural design for basic data base and the basic structures of hardware and software were made up as the basic design for the retrieval system of general technical informations. 4 figs., 1 tab.

  12. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the synthesis and processing of advanced biomaterials (fixation and effective utilization of carbon dioxide using peptides); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Senshin bio zairyo no sosei kako gijutsu no kenkyu kaihatsu (peptide oyo nisanka tanso koteika yuko riyo gijutsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In fiscal 1997, study was made on formation of peptides with a biogenic function and molecular recognition function, and peptide materials. The existing automatic design technique of peptides including non-natural amino acids was applied to design of complementary peptides of proteins with known structures to optimize a development technique of ligand. Practical function of peptides as advanced receptor ligand was verified by applying the existing conformation control technique to stable holding of peptide active conformation. Creation of bio-materials, and development of preparation technology of bio-substrates and materializing technology of functional molecular materials were carried out. To construct an electron transfer system by self- organized body of peptides formed on a substrate, a peptide molecular device was prepared and verified using linkers. To use peptides as photoelectron functional molecule, metallized peptide with main helix structure was prepared. The possibility of molecular materials with a fixation function of CO2 was examined. A high-sensitivity bio-sensor was also mentioned. 75 refs., 130 figs., 25 tabs.

  13. Fiscal 1993 international research cooperation project. Feasibility study of finding out the seeds of international joint research (technology for environmental preservation using biotechnology, technology for effective use unused hydrocarbon resource, technology of solid electrolyte fuel cells for high-efficient electric vehicles); 1993 nendo kokusai kenkyu kyoryoku jigyo. Kokusai kyodo kenkyu seeds hakkutsu no tame no FS chosa (biotechnology ni yoru kankyo taisaku gijutsu, miriyo tanka suiso shigen no yuko riyo gijutsu, kokoritsu denki jidosha no kotai denkaishitsu nenryo denchi gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    This project is aimed at internationally cooperating in the R and D of industrial technology and improving industrial technology of Japan. For it, the following three technologies were investigated: 1) environmental preservation technology using biotechnology, 2) technology for effective use of unused hydrocarbon resource, 3) solid electrolyte fuel cell (SOFC) technology for high-efficient electric vehicles. In 1), bio-remediation is a choice as the result of trially using technologies for remediation of the environment polluted by pollutant, but it is not a technically completed one, but one which will be improved by trial and error. By the application of gene engineering, the use of gene recombination enables wide spread of decomposition genes. In 2), technical subjects were studied such as superheavy distillate, oil shale, coalhead methane and methane hydrate. In 3), designed were cylinder type and planar type SOFC of 850degC operation and 10kW output. Accumulation and weight of a total SOFC system are 81 liters and 100 kg in cylinder type and 136 liters and 200 kg in planar type. The vehicle can be equipped with the SOFC. 171 refs., 72 figs., 54 tabs.

  14. Fiscal 1993 international research cooperation project. Feasibility study of finding out the seeds of international joint research (technology for environmental preservation using biotechnology, technology for effective use of unused hydrocarbon resource, technology for development of environmental harmony type catalyst); 1995 nendo kokusai kyoryoku jigyo. Kokusai kyodo kenkyu seeds hakkutsu no tame no FS chosa (biotechnology ni yoru kankyo taisaku gijutsu, miriyo tanka suiso shigen no yuko riyo gijutsu, kankyo chowagata shokubai kaihatsu gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This project is aimed at internationally cooperating in the R and D of industrial technology and improving industrial technology of Japan. For it, the following three technologies were investigated: 1) environmental preservation technology using biotechnology, 2) technology for effective use of unused hydrocarbon resource, 3) technology for development of environmental harmony type catalyst. In 1), a survey was conducted of applicability of biological surfactant to prevention measures of pollution by heavy distillate. It showed that part of the biological surfactants is reaching a stage of its being industrially produced by gene recombination bacteria, but as a whole, biosynthetic genes have hardly been elucidated. In 2), a survey of high-grade treatment technology of petroleum coke was made. It pointed out that it is necessary to develop a technology which makes the most of features of petroleum coke and allows defects. In 3), scientists and engineers of Japan and Europe searched for themes on which they can jointly study in the fields of NOx removal catalyst, up-grading of fuel, and development of catalyst combustion of fuel. 287 refs., 136 figs., 128 tabs.

  15. Fiscal 1996 international research cooperation project. Feasibility study of finding out the seeds of international joint research (technology for effective use of saturated hydrocarbon, technology for reducing excess of aromatic hydrocarbon, high-grade treatment technology of petroleum coke); 1996 nendo kokusai kenkyu kyoryoku jigyo. Kokusai kyodo kenkyu seeds hakkutsu no tame no FS chosa (howa tanka suiso no yuko riyo gijutsu, hokozoku tanka suiso no yojo taisaku gijutsu, sekiyu cokes no kodo shori gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This project is aimed at internationally cooperating in the R and D of industrial technology and improving industrial technology of Japan. For it, the following three technologies were investigated: (1) technology for effective use of saturated hydrocarbon, (2) technology for reducing excess of aromatic hydrocarbon, (3) high-grade treatment technology of petroleum coke. In (1), surveys were conducted of technologies of effective use of natural gas and effective use of C4 saturated hydrocarbon. Surveyed were a method for producing synthesis gas from natural gas, a technology to liquefy natural gas into fuel following the synthesis gas production process, a technology to liquefy natural gas into fuel without the synthesis gas production process, and the trend of effective use of C4 saturated hydrocarbon. In (2), surveys were made of process to reduce production of aromatic hydrocarbon as much as possible, process to effectively separate aromatic hydrocarbon, and process to convert excess aromatic hydrocarbon into polymer, etc. In (3), surveys were conducted on petroleum coke and pitch in terms of production methods, the supply/demand situation, property characteristics, usability to new fields, etc. 170 refs., 114 figs., 65 tabs.

  16. Report on the surveys in fiscal 1999 on foundations for establishing industrial technology strategies. Technological strategies by fields (Field of nurturing human resources in chemical technologies); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Bun'yabetsu senryaku (kagaku gijutsusha jinzai ikusei bun'ya)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper describes nurturing of human resources in chemical technologies, as part of the surveys in fiscal 1999 on foundations for establishing industrial technology strategies. In association with the progress in scientific technologies, convenience of living has been enhanced exceptionally. On the other hand, however, problems lie in a heap, such as in global environment, energy, resources and population. Safety of chemical substances is questioned. Industrial world is greeted with the times of bubble collapse, information orientation, internationalization, and great competition. Chemical industries are aiming at differentiation and power strengthening, but demanded of conversion into making more independent developments. A large number of problems difficult of solving must be overcome by progress of scientific technologies. The core of the progress is in innovation and creation of new chemical technologies. Since what shoulders the requirements is people, nurturing chemical engineers is the urgent and important issue. Chemical engineers are demanded of having knowledge and experience in environment and safety, and ethics to accomplish social responsibilities, not to speak of their specialty technologies. Human resource nurturing must be carried out effectively under collaboration and cooperation of universities and corporations, rather than they do it independently. This paper describes problems and solution ideas, such as institutions and programs, to achieve the goal. (NEDO)

  17. Test and survey on a next generation coal liquefying catalyst. Coal molecule scientific test and survey as the base for commercializing the coal liquefying technology; Jisedai sekitan ekika shokubai shiken chosa. Sekitan ekika gijutsu shogyoka kiban to shite no sekitan bunshi kagaku shiken chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The test and survey on a next generation coal liquefying catalyst present a new proposal to raise catalytic activity in coal liquefaction, and perform demonstration experiments in a laboratory scale to search for possibility of developing a new coal liquefying catalyst from various viewpoints. To explain, discussions were given on the catalyst to perform the followings: liquefaction under extremely mild conditions by using ultra strong acids not limited only to metals; ion exchange method and swell carrying method to raise catalyst dispersion very highly, enhance the catalytic activity, and reduce the amount of catalyst to be used; mechanism of producing catalyst activating species to further enhance the activity of iron catalysts; and pursuit of morphological change in the activating species. The coal molecule scientific test and survey as the base for commercializing the coal liquefying technology performed the studies on the following items: pretreatment of coal that can realize reduction of coal liquefaction cost; configuration of the liquefaction reaction, liquefying catalysts, hydrocarbon gas generating mechanism, status of catalysts after liquefaction reaction, and reduction in gas purification cost by using gas separating membranes. Future possibilities were further searched through frank and constructive opinion exchanges among the committee members. (NEDO)

  18. Report on the results of the fiscal 1998 survey of arrangement/promotion of the overseas coal import base. Model survey for high level coal utilization promotion models (survey of the present and future situation of coal energy after COP3); 1998 nendo kaigaitan yunyu kiban seibi sokushin chosa (sekitan kodo riyo sokushin model chosa). COP3 iko no sekitan energy no genjo oyobi shorai chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    For the purpose of contributing to the future coal industrial policy of Japan, an investigational study was conducted on the nature of coal as resource, the production/utilization status, policies of other countries, etc. The coal demand during the period of 1991 through 1995 rapidly increased in Asia, slightly rose in North America, decreased in East and West Europe, and largely declined in the former U.S.S.R. The energy demand showed a large growth rate with the economic growth in developing Asian countries in and after the 1980s as a background. The power demand which supports the economic growth will continue to improve. It connects with the coal demand in Asia, and the coal demand seems to rapidly increase. Further, the global warming issue became a great matter of concern in the 1990s. Coal, which emits more CO2 per unit calorific value than oil and natural gas, is not a powerful candidate for petroleum substituting energy as used to be regarded, but became a bad thing. Moreover, recently the economic stagnation in Asia which was triggered by the currency crisis has long been continuing, and it started to appear that the coal consumption will possibly fall very short of the prediction. The future is unclear. 20 refs., 25 figs., 39 tabs.

  19. Fiscal 1995 coal production/utilization technology promotion subsidy/clean coal technology promotion business/regional model survey. Study report on `Environmental load reduction measures: feasibility study of a coal utilization eco/energy supply system` (interim report); 1995 nendo sekitan seisan riyo gijutsu shinkohi hojokin clean coal technology suishin jigyo chiiki model chosa. `Kankyo fuka teigen taisaku: sekitan riyo eko energy kyokyu system no kanosei chosa` chosa hokokusho (chukan hokoku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The coal utilization is expected to make substantial growth according to the long-term energy supply/demand plan. To further expand the future coal utilization, however, it is indispensable to reduce environmental loads in its total use with other energies, based on the coal use. In this survey, a regional model survey was conducted as environmental load reduction measures using highly cleaned coal which were taken in fiscal 1993 and 1994. Concretely, a model system was assumed which combined facilities for mixed combustion with coal and other energy (hull, bagasse, waste, etc.) and facilities for effective use of burned ash, and potential reduction in environmental loads of the model system was studied. The technology of mixed combustion between coal and other energy is still in a developmental stage with no novelties in the country. Therefore, the mixed combustion technology between coal and other energy is an important field which is very useful for the future energy supply/demand and environmental issues. 34 refs., 27 figs., 48 tabs.

  20. FY 2000 report on the results of the development of the program system CO2 fixation/effective utilization technology. Development of the technology to assess global warming gas recovery/emission control by restoring/preserving the tropical mangrove coastal ecosystem; 2000 nendo program hoshiki nisanka tanso koteika yuko riyo gijutsu kaihatsu seika hokokusho. Mangrove nado nettai engan seitaikei no shufuku hozen ni yoru chikyu ondanka gas kaishu hoshutsu yokusei hyoka gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of developing the technology to assess the CO2 storage amount using the tropical mangrove coastal ecosystem, survey was conducted in the mangrove tree area in Ishigaki island, Japan and in Trat province, Thailand, and a draft of the assessment method was worked out. As to the assessment of the CO2 existence amount by analysis of satellite pictures, the regression equation between the mangrove existence amount and Landsat satellite data was determined to study a method for assessment of the CO2 storage amount in the whole area for survey. Further, using the relational equation between NDVI and LAI, vegetation indices reflecting vegetation conditions, methods to estimate the CO2 absorption amount by photosynthesis of mangrove tree community, the CO2 emission amount by respiration and the net production amount. Concerning the technology to assess the terrestrial area photosynthesis CO2 absorption amount, methods were studied for direct measurement of the amount of photosynthesis/respiration of the leaf area of mangrove tree community and the respiration amount by area such as trunk, branch and root and for assessment of CO2 absorption amount. Besides, studies were made on a variety of items such as the CO2 absorption/emission amount by underwater photosynthesis/respiration and decomposition of organic substances, the seawater exchange amount, and the rate of decomposition of organic substances. (NEDO)

  1. Hydrogen utilization international clean energy system technology (WE-NET). Subtask 5. Development of technology of hydrogen transportation/storage (3rd edition, development of liquid hydrogen storage equipment, report on results of Air Liquide); Suiso riyo kokusai clean energy system gijutsu (WE-NET). Subtask 5. Suiso yuso chozo gijutsu no kaihatsu (daisanpen ekitai suiso chozo setsubi no kaihatsu Air Liquide sha seika hokoku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In the fiscal 1995 study, items were searched which are keys to the design of a liquid hydrogen tanker of a capacity of 200,000m{sup 3}. Among those, the basic concepts were summarized which are necessary for the design of a liquid hydrogen tanker in terms of safety, and the extraporation of the existing low temperature technology into the large liquid hydrogen tank was studied. When adopting safety conditions of IGC Code applied to LNG to the liquid hydrogen tanker, it is necessary to limit the discharge amount of hydrogen to 3 kg/s. When considering safety at fire, for keeping safety of the same level as that of the LNG tanker, it is not appropriate to adopt the conventional vacuum insulation liquid hydrogen tank. In the fiscal 1995 study, 7 kinds of concept of the insulation structure were assumed, and it was concluded that BOR of 0.04-0.23/d was obtained. Also in fiscal 1996, the large liquid hydrogen tank was studied. For insulation of the large liquid hydrogen tank, the structure is most promising where AEROSIL bag or homogeneous AEROSIL is substituted for a forming heat insulating material of 4 design, but further study is needed for selection of the optimum heat insulating structure. 9 figs., 6 tabs.

  2. Fiscal 1995 report on the results of the subsidy operation under the Sunshine Project on the development of a geothermal water use power plant, etc. Development of the deep geothermal resource collecting technology (development of the deep geothermal resource drilling technology); 1995 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (shinbu chinetsu shigen saishu gijutsu no kaihatsu / shinbu chinetsu shigen kussaku gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper reported the results of the fiscal 1995 R and D on the development of deep geothermal resource collecting/drilling technology. In the design of a total development, the trend of technical development was examined of bits, cement and DHM overseas. Further, the simulational prediction was conducted in deep geothermal drilling. As to the development of element technology of hard high temperature strata drilling, the R and D of seal mechanism, bearing mechanism and cutter mechanism were carried out aiming at developing heat resistant/durable bits, and a bit was trially manufactured which was integrated with element parts selected by each element technology. Concerning the development of high temperature drilling mud, studies were made of the development of drilling mud materials, a mud system, etc. Relating to the development of high temperature cement slurry, the development was conducted of high temperature cement, dewatering adjusting agents, etc. As to the development of high accuracy much inclination drilling technology, in the development of high temperature use downhole motor, tests on heat resistance/durability were carried out in the mud of 12 kinds of high heat resistant stator materials. 175 figs., 137 tabs.

  3. Fiscal 1996 report on the results of the subsidy operation under the Sunshine Project on the development of a geothermal water use power plant, etc. Development of the deep geothermal resource collecting technology (development of the deep geothermal resource drilling technology); 1996 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (shinbu chinetsu shigen saishu gijutsu no kaihatsu / shinbu chinetsu shigen kussaku gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper reported the results of the fiscal 1996 R and D on the development of deep geothermal resource collecting/drilling technology. In the design of a total development, the planned adjustment of actual well tests was conducted on bits and drilling mud at the time of drilling the exploration well of the Kakkonda area. As to the trend of overseas technology, examined was the developmental trend of high temperature type downhole motor products. In the development of hard high temperature strata drilling element technology, a drilling test was carried out on trially manufactured 300degC heat resistant/durable bits. In the development of high temperature drilling mud, drilling was done in the mud of thermally stable quality in the actual well experiment using the 300degC mud system. In the development of high temperature use cement and high temperature use cement slurry, a possibility was obtained of composing a slurry which has the targeted dewatering amount, compressive strength, and water permeability. In the development of high temperature downhole motor, data on characteristics of heat resistant stator materials were arranged in a relationship among the abrasion amount, thermal expansion amount and elastic recovery amount, and the database was obtained. 166 figs., 148 tabs.

  4. Fiscal 1997 survey report. Subtask 2 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (survey/study for the promotion of international cooperation; survey/study on the standardization for hydrogen energy technology); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 2 kokusai kyoryoku suishin no tame no chosa kento (suiso energy gijutsu hyojunka ni kansuru chosa kento)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In relation to the basic study of the standardization for hydrogen energy technology and ISO/TC197, the results of the fiscal 1997 survey were summarized. From fiscal 1994 through 1996, in the wide-range field related to hydrogen energy technology, the survey of the present situation of the related standards/laws was made and the needs/subjects of standardization to be studied in the future were extracted. At the present stage, however, it is still early to enter into the stage of discussing the standardization. Therefore, in this fiscal year, only in the field of the storage/transportation/handling of liquid hydrogen, standards/laws abroad and in Japan were comparatively investigated for the basic study toward the standardization. Further, concerning ISO/TC197, studies were proceeded with of the liquid hydrogen land vehicle fueling system interface/fuel tanks/transportation containers/hydrogen fuel product specifications/airport hydrogen fueling facilities. Some are at the stage of drafting the international standard. Three drafts for the new standard were added such as gaseous hydrogen/hydrogen blend vehicular fuel systems, gaseous hydrogen fuel tanks, and basic requirements for safety of hydrogen systems. The standardization is indispensable to introducing the developed technology to the commercialization. 9 refs., 5 figs., 13 tabs.

  5. Survey for making a data book on the new energy technological development. Waste-fueled power generation, solar heat utilization, geothermal power generation, clean energy vehicles, coal liquefaction/gasification, and traversal themes; Shin energy gijutsu kaihatsu kankei data shu sakusei chosa. Haikibutsu hatsuden, taiyonetsu riyo, chinetsu hatsuden, clean energy jidosha, sekitan ekika, gas ka oyobi odanteki tema

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper concerns the following six fields among the fields of new energy technology: the waste-fueled power generation, solar heat utilization, geothermal power generation, clean energy vehicles, coal liquefaction and coal gasification. The up-to-date data made public were collected and classified into the following items: outline of systems, specific examples of the introduction in Japan and other countries, policies/laws and rules/subsidy systems, production quantity/actual amount of introduction/projected amount of introduction (target), cost, terminology, listing of main related companies and groups, etc. Further, arrangement was traversally conducted on the outlook of the energy introduction by the Japanese government and measures taken for development of new energy by Japan and other countries. Namely, the items of the book are as follows: classification of new energy, outlook for energy supply/demand, cost of new energy technology (power generation) and outlook for the introduction, menus of buying surplus electricity of electric companies, policies/laws and rules/subsidy systems concerning the new energy introduction in Japan and overseas, and a list of organizations engaged in the new energy technological development.

  6. Fiscal 1997 survey report. Subtask 2 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (survey/study for the promotion of international cooperation); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 2 (kokusai kyoryoku suishin no tame no choa kento)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The survey was aimed at developing the WE-NET as a joint project worldwide by taking concrete measures such PR activities to obtain international understanding and cooperation of WE-NET based on the survey/grasp of researches of research institutes in each country and the developmental trend of hydrogen energy in each of the main countries. Implementing a `long-term vision for the WE-NET international cooperation,` the following measures were taken in fiscal 1997. PR activities were positively developed which coped with the worldwide increasing interest in WE-NET such as delivery to overseas institutions of the fiscal 1996 survey report in English summarized by NEDO and information exchanges, and participation in international conferences and presentation of the research results. From a standpoint of positively proceeding with the international technical information exchange, the following were conducted following fiscal 1996: 1) the evaluation study jointly made with Stanford University of effects of reducing air pollution by introducing hydrogen cars, 2) survey on the U.S. hydrogen project, and 3) preparation for opening of the WE-NET internet home pages. 17 figs., 18 tabs.

  7. Survey report for fiscal 1998. Survey of the current state and tasks of research and development of technologies for effectively utilizing CO{sub 2} fixation by higher vegetation; 1998 nendo chosa hokokusho. Koto shokubutsu ni okeru nisanka tanso koteika yuko riyo gijutsu no kenkyu kaihatsu no genjo to kadai ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Investigations and studies are conducted seeking for a CO2 fixation method improved by utilizing the photosynthesizing function of higher vegetation. Details of higher vegetation genes are being disclosed thanks to the rapid progress of studies making use of molecular biological techniques, and the application of the genetic mechanism to scientific and technological fields is becoming increasingly feasible. In particular, the role of the CO2 fixation enzyme RuBisCO has been elucidated almost completely. It has been learned that, in terms of photosynthesizing capability, the C{sub 4} plants (corn etc.) are 2-3 times higher than the C{sub 3} plants (rice, wheat, etc.), and 5-10 times higher than the CAM plants (cactuses etc.). Studies are also under way about the rice genome so that a photosynthesizing capability so high as that of the C{sub 4} plants may be endowed the rice plant. The metabolism and control of useful substances produced in the CO2 fixation process etc. in the higher vegetation are being investigated, and it is now expected that some day such useful substances will be produced and utilized efficiently. Researches are under way into the relationship between the green leaf that is the organ that performs photosynthesis and the organ (sink) that stores and utilizes starch and sugar is in progress, and now a new field is going to open where vegetables will be fully utilized. (NEDO)

  8. Fiscal 1997 report on the survey for a data book on new energy technology development. Waste power generation, solar energy utilization. geothermal power generation, clean energy vehicles, coal liquefaction/gasification, and traverse themes; 1997 nendo chosa hokokusho. Shin energy gijutsu kaihatsu kankei data shu sakusei chosa (haikibutsu hatsuden, taiyonetsu riyo, chinetsu hatsuden, clean energy jidosha, sekitan ekika gas ka oyobi odanteki theme)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper collected and arranged data on new energy technology. As to the waste power generation, in terms of general waste, 161 places have power generation facilities, 657,000 kW in output, as of the end of FY 1996. Out of them, 100 facilities (scale of output: 555,000 kW) are selling power. In terms of industrial waste, 53 places (209,000 kW) have power generation facilities. The output will be 2 million kW in FY 2000. In relation to the solar energy utilization, the number of solar systems introduced in FY 1996 is 25,000, that of water heating appliances produced in FY 1996 is 170,000. Geothermal power of 494,000 kW and 37,000 kW was introduced for electric power industry use and private use, respectively. Clean energy vehicles have not been so much spread, but the hybrid car was put on sale in 1997. Concerning the coal liquefaction, the R and D were made at a pilot plant of NEDOL process, and operation started in 1997. As to the coal gasification, investigational study and element study on the demonstration plant are being conducted in FY 1997 and 1998, making use of the research results obtained from the existing pilot plant of coal gasification combined power generation

  9. Report of FY 1997 on the international cooperation project. Survey of globalization of the effective energy resource utilization technology (development of high-accuracy acceleration measurement system); 1997 nendo kokusai kenkyu kyoryoku jigyo. Energy shigen yuko riyo gijutsu kenkyu kokusaika chosa (koseido kasokudo keisoku system no kaihatsu chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This report describes effectiveness of a system for measuring the acceleration and force in high accuracy by combining a laser interference meter and a vibration stand. A possibility of pressure sensitive paper to the impact force measurement in the collision examination is also described. The results obtained in FY 1997 are as follows. For the investigation of calibration system of acceleration and force sensor, one-dimensional interferometer system has been developed, which is standardized in ISO5347 accelerometer calibration. Thus, an interference fringe processing software has been made. Moreover, construction of a three-dimensional interferometer system has been started. For the characterization evaluation of pressure sensitive papers, it was succeeded in obtaining an elasticity wave pulse maximum about 1 msec by adopting the flight body made of resin. As a result, evaluation of the force sensor in the frequency area has become possible. To calculate the displacement of a body structural material in the collision experiment, an acceleration sensor has been made for trial purposes. For the international research cooperation, the working plan of a joint research with US Texas Christian University has been concluded. 11 refs., 73 figs., 23 tabs.

  10. Fiscal 1998 research report on International Clean Energy Network using Hydrogen Conversion (WE-NET). Subtask 3. Prediction evaluation on a national scale; 1998 nendo suiso riyo kokusai clean energy system gijutsu (WE-NET) sub task. 3. Ikkoku kibo deno yosoku hyoka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Japanese long-term energy demand and various energy use styles were simulated from the viewpoint of a profitability and environmental preservation, and hydrogen consumption was studied. In the research in fiscal 1998, the data on available primary energy was modified based on the upper limit of CO{sub 2} emission by COP3, and the long-term energy supply and demand outlook of Advisory Committee for Energy in June, 1998. The result of scenario analysis is as follows: (1) The reference scenario showed that reduction of a hydrogen price is indispensable to use imported hydrogen, (2) The carbon externality scenario showed that market penetration of hydrogen can be large if the carbon externality amounts to $300/t-C, (3) The high fossil fuel price scenario showed that a fossil fuel price (in particular, price of hydrocarbon) highly affects market penetration of hydrogen, and (4) The low nuclear capacity scenario suggested that a competitiveness of hydrogen is considerably improved as an energy supply-demand-balance is tight. (NEDO)

  11. Fiscal 1998 industrial science and technology R and D project. Research report on R and D of genome informatics technology (Development of stable oil supply measures using complex biosystem); 1998 nendo genome informatics gijutsu kenkyu kaihtsu seika hokokusho. Fukugo seibutsukei riyo sekiyu antei kyokyu taisaku kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report describes the fiscal 1998 result on development of genome informatics technology. As comparative analysis technique of genes, the combination of electrophoresis and PCR was used. For improvement of the throughput and reproducibility of the technique, module- shuffling primers were used, and the multi(96)-arrayed capillary fragment analyzer was devised. The system detecting SNPs rapidly was also developed successfully. As analysis technology of DNA sequence by use of triple- stranded DNA formation, study was made on construction of long cDNA libraries, selective subtraction of specific sequences from libraries, and the basic technology of homologous cloning. Study was also made on each reaction step of IGCR technique for fast analysis, and specifications of a fluorescence transfer monitor. As modeling technique of genetic sequence information, the simulation model was developed for gene expression regulatory networks during muscle differentiation, and feedback regulation of period genes. Such support systems as transcription factor prediction and gene regulatory network inference were developed from existing data. (NEDO)

  12. Hydrogen utilization international clean energy system (WE-NET). Subtask 8. Development of hydrogen combustion turbines (development of combustion control technology); Suiso riyo kokusai clean energy system (WE-NET). Subtask 8. Suiso nensho turbine no kaihatsu nensho seigyo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper described the fiscal 1996 developmental results of hydrogen burning turbine combustion technology in the hydrogen utilization international clean energy system (WE-NET) project. A test was conducted on an annular type combustor where oxygen is mixed with steam (inert gas) at burner and fired with hydrogen. Appropriate flame shape and cooling/dilution vapor distribution were attempted, and various data on combustion were measured for improvement. Mixture and flame holding were improved by developing a can type combustor (1) where oxygen is diluted with steam after firing oxygen and hydrogen around burner and by strengthening circulation in the combustor. Improvement such as appropriate steam distribution, etc. is needed. A can type combustor (2) was tested in which the premixed oxygen and hydrogen is supplied from scoop and fired with hydrogen. By supplying part of oxygen from the primary scoop, the residual hydrogen and oxygen concentration around the stoichiometric ratio can be reduced. Concentration of the residual oxygen can be measured by the absorption light method, but it is difficult to adopt the non-contact measuring method to hydrogen. An outlook for the gas temperature measuring method was obtained. 12 refs., 121 figs., 27 tabs.

  13. Fiscal 2000 report on basic survey of coal resource development. Information collection and analysis project (Technical cooperation project on coal mine methane gas recovery and utilization); 2000 nendo sekitan shigen kaihatsu kiso chosa (joho shushu kaiseki jigyo) hokokusho. Tanko methane gas kaishu riyo gijutsu kyoryoku jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    A survey was conducted to construct a simulation technique for predicting changes in the behavior of gas to accompany digging in Australian coal mines. The survey activities were conducted in the mining area of the Wambo colliery in the Hunter valley, New South Wales, which involved the acquisition of geotechnological data including the amount of coal reserves and the amount of methane gas held in the coal seams, drilling of 19 test bores (with cores sampled from some of them), geophysical logging of the test bores, seismic exploration, analysis of the sampled cores, rock tests, modelling of the geological structure, testing of gas from the coal seams, modelling of the state of existence of the gas, and so forth. It was found that the amount of gas held in the coal seams at levels 200m or deeper was larger than 9m{sup 3}/t. Existing software programs were examined as to whether they could be used for the preparation of a gas behavior simulation program, and it was found that none of them was capable of helping the simultaneous simulation of rock deformation due to drilling and the resultant change in multi-phase gas behavior. The conclusion was that it was necessary to newly develop a comprehensive simulation software program. (NEDO)

  14. Fiscal 1999 survey report. Basic survey for development of coal resources - project for information collection and analysis (technical cooperation project for recovery and utilization of mine methane); 1999 nendo sekitan shigen kaihatsu kiso chosa (joho shushu kaiseki jigyo) hokokusho. Tanko methane gas kaishu riyo gijutsu kyoryoku jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The purpose of this project is to reduce environmental load by investigating the recovery/utilization technologies of mine methane gas, to build predictive simulation for the behavioral change in methane gas that is incidental to underground mining, and to reflect the simulation on the optimum mining plan. Performed in the survey this year were the information collection/analysis of the coal and gas resources, exploratory boring for the purpose of grasping the geology, coal bed and gas abundance in the selected survey sites, measurement of coal bed gas reservoir, and the survey of geotechnological features. The operations were as follows; collection of existing geological data and selection of exploratory boring sites for Arrowfield layers and Bowfield layers in the Hunter Valley region. The coal bed gas reservoir and the composition of the coal cores obtained in eight borings this year provided precious gas data along with the survey results performed in the subject sites in the past. In particular, significant data necessary for depth coal development were also obtained in the surrounding mines including the subject survey sites. It was confirmed that the gas reservoir in the coal bed was 8 m{sup 3}/t to 9 m{sup 3}/t on the average. (NEDO)

  15. Survey for preparing the database for R and D of new engines. Waste power generation, solar heat system, geothermal power generation, clean energy vehicle, coal liquefaction/gasification, and combined systems; Shin energy gijutsu kaihatsu kankei data shu sakusei chosa. Haikibutsu hatsuden, taiyonetsu riyo, chinetsu hatsuden, clean energy jidosha, sekitan ekika gas ka oyobi odanteki tema

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The present developmental conditions and issues of new energies are systematically arranged for effective promotion of their diffusion. One hundred and forty six general waste power generation facilities of 558,000kW are in operation in 1995, and among them 89 facilities supplies 1,080 GWh to power companies. 50 industrial waste power facilities of 247,000kW are in operation. 20,000 solar systems and 180,000 hot water heaters are in operation in 1995. Commercial geothermal power generation facilities of 490,000kW and private ones of 36,000kW are in operation. Introduction of expensive clean energy vehicles is making very slow progress. The pilot study on bituminous coal liquefaction is in promotion mainly by NEDO. The experiment of entrained bed coal gasification in Nakoso was successfully completed, and development of a commercial plant is to be expected. Power rates of 10 power companies were reduced in 1996, and unit purchase prices of surplus power of photovoltaic and wind power generation were also revised. The new menu and unit purchase price were announced in 1996 for surplus power of waste power generation and fuel cell. 67 figs., 284 tabs.

  16. Fiscal 1997 survey report. Subtask 3 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (conceptual design of the total system/city-level energy estimation and assessment); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask zentai system gainen sekkei (toshi kibo deno yosoku hyoka)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described the fiscal 1997 result of the study of scenarios for introducing hydrogen to the urban area. In the case of studying it in London, it was found that hythane (mixture of hydrogen into town gas) was effective, but in the case of doing in Tokyo, it was found that the scenario was undesirable because of the increasing infracost. Accordingly, another scenario was studied. It was assessed from the aspects of environmental advantages, infracosts, and potential advantageous values in urban areas associated with hydrogen utilization (hydrogen premium). It is most effective to use hydrogen as a fuel of transportation means from the aspect of environmental merits as the decrease in external cost. In Tokyo, the dependence upon electric power is large, and therefore it is attractive to introduce highly efficient fuel cells which enable the dispersed cogeneration using hydrogen. The value of hydrogen is determined by the avoidance of environmentally influential substances and the surplus generated output by fuel cells (substitution for the existing natural gas). When the high external cost can be assumed, the value of hydrogen becomes large. The paper also considered the arrangement of infrastructures in Tokyo. 187 refs., 14 figs., 18 tabs.

  17. Development of hydroponic system using agriculture waste. 1. Characteristics of rice husk charcoal as growth medium and vegetable growth; Suiko saibai ni okeru haikibutsu riyo gijutsu no kaihatsu. 1. Momigara kutan no baichi to shite no tokucho to yasai no seiiku

    Energy Technology Data Exchange (ETDEWEB)

    Terazoe, H.; Nakaya, K.; Okano, T. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1994-06-01

    Experimental researches were made on rice husk charcoals processed to be used as culture media for hydroponics. Rice husk charcoals with a size of 1 mm or larger retaining the original shape of the rice husk, and with a size of smaller than 1 mm were made for use in the experiment. In the culture media made of these rice husk charcoals, the charcoal with a particle size greater than 1 mm had more air portion than water portion at 6 cm above the water level, and the charcoal with a particle size smaller than 1 mm had poor air permeability. According to the result of immersing the rice husk charcoal in a culture solution, phosphoric acid ion and manganese in the solution decreased by about 35% and calcium by about 10% in the duration of 120 minutes, as a result of having been adsorbed into the rice husk charcoal. On the other hand, chloride ion increased by about 80% and potassium and iron by about 30%, because of having been dissolved out from the charcoal. In cultivating spinach, butterhead lettuce and radish in the rice husk charcoal culture media, the culture medium with charcoal smaller than 1 mm resulted in harvest reduced by about 75% in spinach, and about 10% in butterhead lettuce. 15 refs., 13 figs., 11 tabs.

  18. Fiscal 1998 achievement report on regional consortium research and development project. Regional consortium of venture business fostering type--Creation of key industries (Development of technologies for manufacturing and utilizing various biological regulatory substances using Hokkaido-produced biomasses as materials); 1998 nendo Dosan biomass wo genryo to shita kakushu seitai chosetsu kino busshitsu no seisan riyo gijutsu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The efforts aim to meet consumers' needs for products that will prevent lifestyle diseases or the like. For this purpose, substances answering the purpose are extracted from Hokkaido-produced agricultural and aquatic biomasses, and prepared for testing. Researches are conducted on how they behave in the enzyme, cell, and biological systems, and active substances are isolated and identified. In relation to the aquatic biomass, a technology is established of extracting and separating DHA (docosahexaenoic acid), EPA (eicosapentaenoic acid), taurine, etc., which are multivalent unsaturated fatty acids effective in preventing lifestyle diseases, from the unused parts of the squid. In relation to the agricultural biomass, antimicrobial active substances are extracted and separated from small fruit plants such as the chicory. Long-keeping foods are tentatively produced by the addition of dried powder of the chicory root tuber. In the elucidation of various biological regulatory substances contained in the Hokkaido-produced biomasses, they are tested for their abilities to resist microbes and active oxygen. Furthermore, verification tests are conducted by administering the substances to the senescence-accelerated mouse (SAM). (NEDO)

  19. Hydrogen utilization international clean energy system technology (WE-NET). Subtask 8. Development of hydrogen combustion turbines (development of the main auxiliary machinery); Suiso riyo kokusai clean energy system gijutsu (WE-NET). Subtask 8. Suiso nensho turbine no kaihatsu (shuyo hokirui no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper described the fiscal 1996 developmental result of the main auxiliary machinery of hydrogen combustion turbines, as one of the hydrogen utilization technologies, which are excellent in environmentality and are expected of remarkably high efficiency. When a scale of the turbine plant is 500MW, there are two systems of 125,000 Nm{sup 3}/h and 62,500 Nm{sup 3}/h as a capacity of the hydrogen/oxygen supply system. Cold energy is taken out by the plate fin method. In view of safety, the main heat exchanger was separated into those for hydrogen and for oxygen (liquid oxygen cold energy recovery). In the para-ortho conversion of hydrogen, cold energy of 90% of the ideal state was gained in the one-stage catalyst conversion. As to high temperature heat exchangers, full-scale studies were conducted of size reduction, structural soundness, and the heat exchanger for pilot plant use. The more Cr the material contains, the less the corrosion due to high temperature steam is. For stainless steel, shot peening and fining of crystal grain were effective. Size reduction of the new Rankine cycle use steam generator was made possible by making its fin number and tube pitch proper. However, when making tube pitch smaller, flexural rigidity is lowered. Accordingly, it is necessary to study a trade-off between the size reduction and the structural soundness. 31 refs., 125 figs., 11 tabs.

  20. FY 1995 report on the results of the investigational study on the technology development for the commercialization of solar systems for industrial use, etc. - Investigational study on the solar system. Investigational study on a solar heat utilization system; 1995 nendo sangyoyonado solar system jitsuyoka gijutsu kaihatsu seika hokokusho. Solar system no chosa kenkyu (taiyonetsu riyo system ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This survey clarifies the present situation of the solar heat utilization technology mostly for industrial use, makes a concrete concept of solar heat utilization clear, and extracts items of the technology development and evaluates sociality, economical efficiency, etc. It aims at working out a program for the future technology development. The following proposals were made: 1) technology development program; 2) simulation soft development program; 3) experimental field of the solar heat utilization technology. In 1), concepts of technology development are 'medical use boiling pasteurization,' 'temperature increase in the metal surface treatment process,' 'water purification using photo-catalyst,' 'distributed small power system,' and 'waste water treatment using bio-technology.' In 2), cost reduction is needed for commercialization/merchandising of technology, and therefore, the development of simulation software is studied. In 3), as the experimental field from commercial/residential use system to industrial use system, an large-scale and systematical experimental field is proposed where all that can be substituted for by solar energy among the energies required for the urban function are used. By this, the solar heat utilization system gets accustomed to the people, increases the reliability, and clearly leads to the course to the next stage of the R and D. (NEDO)

  1. FY 2000 report on the results of the development of commercialization technology of the photovoltaic power system. Summary. R and D of the photovoltaic power generation utilization system/periphery technology (R and D on the improvement of reliability of photovoltaic power generation - Investigative study of the electric safety of the photovoltaic power system); 2000 nendo New sunshine keikaku seika hokokusho. - Taiyoko hatsuden system jitsuyoka gijutsu kaihatsu - Taiyoko hatsuden riyo system shuhen gijutsu no kenkyu kaihatsu (Taiyoko hatsuden no shinraisei kojo ni kansuru kenkyu kaihatsu - Taiyoko hatsuden system no denkiteki anzensei no chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the prevention of the secondary disaster associated with the leakage of electricity and spark generation in the photovoltaic power system at the time of being struck by disaster such as lightning, the investigative study was conducted, and the FY 2000 results were reported. In the study of technology of lightning damage prevention, the following were carried out: test on electrical insulation characteristics of modules, test on lightning impulse current of modules, various simulation tests on lightning surge voltage, etc. As to measures for prevention of lightning damage of the photovoltaic power system, two cases of simulation tests were conducted: case in which the lightning over voltage was controlled by installing arrester in array or junction box; case in which the over voltage was controlled by connecting the line of D class ground of PV system and the line of B class ground of pole transformer. In both cases, the effect of reduction in lightning over voltage was confirmed. In the investigative study of the life of PV module, the following were studied: deterioration due to the glass damage of PV module, influence of hot spot phenomena in case small particles such as rubbish were put on the surface of the PV module integrated with construction material, influence of hot zone phenomena at PV module connection spots. (NEDO)

  2. Gravity anomalies and basement structure in Osaka plain; Osaka heiya no juryoku ijo to kiban kozo

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, N.; Nakagawa, K. [Osaka City University, Osaka (Japan). Faculty of Science; Ryoki, K. [Osaka Polytechnical College, Osaka (Japan)

    1998-02-01

    Many kinds of new information about the underground structure are necessary for elucidating problems on the distribution characteristics of the structural damage and the ground failure due to the 1995 Hyogo-ken Nanbu Earthquake. The gravity anomalies in and around the Osaka sedimentary basin, which is mainly composed of Mesozoic granitic basement and post Tertiary sedimentary layers covering the basement, has been compiled with the data additional gravity measurements in the Hanshin-Osaka area. Basement configuration plays the important role in concentration or dispersion of seismic waves. In general, trends of the gravity anomalies should be removed from obtained gravity anomalies in order to estimate the sub-surface structures. The local free-air anomalies, which are residual anomalies obtained by applying regression technique to regional trends, exhibit linear relationship with the depth to the basement surface. In this study, therefore, the underground structure of the Osaka basin was estimated from the local free-air anomalies. First approximate model of basement surface was constructed by means of the method mentioned above, based upon the two layer (basement rock and the sedimentary cover) model. Further three dimensional model was developed based on the characteristic distribution of density inferred from seismic exploration analysis. 19 refs., 21 figs., 1 tab.

  3. Electric vehicles; Jidosha gijutsu. Denki jidosha

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, T. [Suzuki Motor Co. Ltd., Shizuoka (Japan)

    1998-08-01

    Problems such as global warning, air pollution centering mainly to big cities, diversification of energy resources and so forth are dealt world widely in big scale and expectation to clean electric vehicles is getting higher. Conventional electric vehicles were mainly light vans. Although the ZEV sale compulsion from the year 1998 in California State was postponed, small type electric vehicles with improved performance appeared one after another from the fact that there is 10% sale compulsion in 2003. In Japan, these ordinary/small type electric vehicles are getting popularized rapidly. As for overseas, present record of 1996, number of electric vehicles sold by America were 2300 cars, Europe sold 3000 cars, Italy 800 cars, Germany 4,500 cars, Switzerland 2,050 cars and their sale has been promoted centering to France. As for technology development, transfer from direct motor to alternating motor as a power unit is completely ahead. Further, development of new type of battery is commonly carried out and electric vehicles with new battery are outstanding. 4 refs., 5 figs., 4 tabs.

  4. Energy conversion with application of biotechnology. Baio riyo energy henkan

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, T.; Uozumi, N. (Nagoya Univ., Nagoya (Japan). Faculty of Engineering)

    1992-09-05

    Biological resources are produced by photosynthetic action of plants by the use of solar energy and decomposed and circulated mainly by microorganisms in the ecological system. Various energy conversions are possible by the use of functions of microorganisms. The paper overviews the various energy conversion systems under investigation. A bioreactor to produce hydrogen by the use of a certain microorganism from organic compounds in a dark condition is studied in combination with oxygen and nitrogen removal system. Anaerobic methane fermentation has been used practically and the process is noteworthy to use marine biomass as the raw materials. Eucalyptus, Ricinus (castor oil plant) and Hevea (para rubber plant) attract attention on direct production of hydrocarbons. While alcoholic fermentation is known since ancient times, ethanol is now used in automobile fuel, and cellulose is a subject of a study as a raw material of fermentation instead of starch. The investigation includes effective utilization techniques of cellulose by degradation and higher efficiency of photosynthesis by use of technologies of genetic engineering. 1 ref., 2 figs.

  5. Photon technology. Laser processing technology; Photon technology. Laser process gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Survey has been conducted to develop laser processing technology utilizing the interaction between substance and photon. This is a part of the leading research on photon technology development. The photon technology development is aimed at novel technology development highly utilizing the quantum nature of photons. In the field of laser processing, high quality photons are used as tools, special functions of atoms and molecules will be discovered, and processing for functional fabrication (photon machining) will be established. A role of laser processing in industries has become significant, which is currently spreading not only into cutting and welding of materials and scalpels but also into such a special field as ultrafine processing of materials. The spreading is sometimes obstructed due to the difficulty of procurement of suitable machines and materials, and the increase of cost. The purpose of this study is to develop the optimal laser technology, to elucidate the interaction between substance and photon, and to develop the laser system and the transmission and regulation systems which realize the optimal conditions. 387 refs., 115 figs., 25 tabs.

  6. Sewage water quality measuring technology. Josuido suishitsu keisoku gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Urushibara, S.; Sato, S.; Fukuoka, M. (Meidensha Corp., Tokyo (Japan))

    1993-07-01

    This paper describes a new bubble-cleaning dissolved oxygen analyzer with improved maintainability as a sewage water quality measuring instrument, and a sludge activity measuring instrument to measure new water quality control items for managing and controlling microorganisms. The bubble-cleaning dissolved oxygen analyzer uses a tip-detecting polarographic electrode, and has excellent maintainability because of its bubble cleaning mechanism. Since output rise resulted from the bubble cleaning is as very small as about 0.2 mg/l, continuous cleaning is possible while a measurement is continued. The continuous cleaning provides high cleaning effect because microorganism film deposition can be prevented constantly. The sludge activity measuring instrument measures automatically adenosine triphosphate (ATP) to evaluate activities in microorganisms quickly and accurately. The ATP measurement utilizes organismic luminous reaction, and performs the measurement automatically from the sample extraction to the luminous measurement by simply fractioning the test samples into test tubes. The instrument can also estimate using ATP such biomasses as MLVSS and BOD, of which measurement consumes a large amount of time. 2 refs., 3 figs., 1 tab.

  7. Development of LTA technology; Hikosen, kikyu gijutsu no hatten

    Energy Technology Data Exchange (ETDEWEB)

    Wada, T.

    2000-02-05

    This paper describes technologies for LTA (lighter-than-air aircraft). LTA such as airship and balloon cruises by static buoyancy of gas. Since the body of LTA becomes large inevitably because of small buoyancy of gas, LTA has such essential demerits as dependence on wind, inconvenient handling and low speed. However, LTA is featured by large carrying capacity by large body, and long-distance and long- time flight. At present, LTA is in use for not military use and transport but advertisement, publicity, sports and observation. For development of its new fields, a stratospheric platform for a radio relay station and ground monitoring is in experiment which is composed of many unmanned balloons around 20km in altitude. A solar airship with solar panels on its wide surface is also under investigation. A planet observation balloon is also under review in many countries. The pioneering of the upper part (30-40km in altitude) of the stratosphere by LTA is promising because such space is a frontier never pioneered by manned light plane. (NEDO)

  8. Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the application of photon to industrial technologies, in particular, a hard photon technology was surveyed which uses photon beams of 0.1-200nm in wavelength. Its features such as selective atom reaction, dense inner shell excitation and spacial high resolution by quantum energy are expected to provide innovative techniques for various field such as fine machining, material synthesis and advanced inspection technology. This wavelength region has been hardly utilized for industrial fields because of poor development of suitable photon sources and optical devices. The developmental meaning, usable time and issue of a hard photon reduction lithography were surveyed as lithography in ultra-fine region below 0.1{mu}m. On hard photon analysis/evaluation technology, the industrial use of analysis, measurement and evaluation technologies by micro-beam was viewed, and optimum photon sources and optical systems were surveyed. Prediction of surface and surface layer modification by inner shell excitation, the future trend of this process and development of a vacuum ultraviolet light source were also surveyed. 383 refs., 153 figs., 17 tabs.

  9. Active noise control technology. Active soon seigyo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Eguchi, M.; Kokubo, F.; Tanaka, S.; Yao, K. (Sharp Corp., Osaka (Japan))

    1994-05-10

    The signal processing method of the Active Noise Control (ANC) system was studied. The principle of ANC is to output secondary sound waves having opposite phase, identical amplitude from the control point of the sound wave of the primary sound source, and eliminate the noise by interference. As application fields, there are air conditioner ducts and compressors as one dimensional noise source, and automobile and axial fan as three dimensional noise source. In order to improve the stability of coefficient renewal algorithm of Adaptive Digital Filter (ADF), for generation of opposite phase noise, DC-LMS algorithm which can control the rise in gain of specified frequency zone was proposed. Furthermore, with the purpose of reducing the amount of operation, the introduction of lattice type AR filter was tested for the stability of the filter in IIR-ADF (Infinite Impulse Response Adaptive Digital Filter) and its application process. The applicability studies of these improved methods on the noise inside of ducts were actually measured, and the effect was verified. For the multi-channel control of 3 dimensional noise source, reference scanning method to reduce the filter operation was proposed. In the partial space noise eliminating experiment, it was made clear that it possesses equivalent effect to error scanning method. 11 refs., 14 figs., 1 tab.

  10. Evaluation technology of clothing comfortableness; Ifuku tekigosei hyoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Niwaya, H.

    1999-10-26

    Modern apparel industries are required to supply many kinds of products corresponding to various needs of consumers. Among consumers' needs, comfortableness to wear such as size-fitness is primarily important. To facilitate apparel industries, it is expected to develop a new technology of pattern designing of comfortable garment and measuring garment pressure distribution. Our research is aimed at developing technology that uses computer simulation to predict and evaluate wear comfort, including size suitability, without the need to actually sew up a garment. First, we developed a basic system to predict wearing silhouette, garment pressure, and ease looseness of the garment. Using this system, we carried on the following study. The 3-dimensional distributions of the garment pressure and ease looseness were reversely mapped on the paper pattern in order to indicate the preferable modification. The system was extended for several poses, e.g. twist, bend. From various parameters, we examined the factors of garment pressure and ease looseness. In addition, we selected the parameters for the size-fit indicators and investigated size-fit evaluation indicators. (author)

  11. Cloned animal and transgenics; Kuron gijutsu to dobutsu kojo

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, S. [National Inst. of Animal Industry, Ibaraki (Japan)

    1998-10-10

    Somatic cell cloning technologies are explained, and their use in the manufacture of biologically active substances such as pharmaceuticals is described. In general a cloning technology means a technology of nucleus transfer in which the nucleus of an ovum is removed and the nucleus of another cell is transferred. Since a mammalian ovum is but 100-150{mu}m in diameter, the removal or transfer of a nucleus has to be performed under an inverted microscope provided with a micromanipulator. In 1986, this method was employed for the transfer of a cell nucleus at its early division stage in a sheep embryo, and a sheep was cloned. The production of useful substances such as pharmaceuticals is performed through gene recombination for coli bacteria, yeast fungi, and cultured mammalian cells, but there are some problems to be solved about the amount produced, cost of production, biological activity, etc. Under such circumstances, a concept of animal factory has been invented in which Tg (transgenic) animals themselves are utilized as bioreactors, and several venture organizations have already been incorporated. 3 refs., 1 fig., 1 tab.

  12. Welding technology for rails. Rail no setsugo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Okumura, M.; Karimine, K. (Nippon Steel Corp., Tokyo (Japan)); Uchino, K.; Sugino, K. (Nippon Steel Corp., Kitakyushu, Fukuoka (Japan). Technical Research Inst. of Yawata Works); Ueyama, K. (JR Railway Technical Research Inst., Tokyo (Japan))

    1993-08-01

    The rail joining technology is indispensable for making long welded rails. Flush butt welding, gas welding, enclosed arc welding, and thermit welding are used properly as the welding methods. A method for improving the joint reliability by controlling the residual stress distribution of welded joint is investigated to prepare high carbon component weld metal similar to the rail. Problems with each of the welding methods and the newly developed technology to solve the problems are outlined. Composition of the coating is improved also, and a high C system welding rod is developed which has satisfactory weldability. High performance and high efficient new enclosed arc welding technology not available by now is developed which utilizes high carbon welding metal as a new EA welding work technology, and put to practical use. As a result of this study, useful guides are obtained for the establishment of satisfactory thermit welding technology. 17 refs., 16 figs., 1 tab.

  13. Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Research results of hard photon technology have been summarized as a part of novel technology development highly utilizing the quantum nature of photon. Hard photon technology refers to photon beam technologies which use photon in the 0.1 to 200 nm wavelength region. Hard photon has not been used in industry due to the lack of suitable photon sources and optical devices. However, hard photon in this wavelength region is expected to bring about innovations in such areas as ultrafine processing and material synthesis due to its atom selective reaction, inner shell excitation reaction, and spatially high resolution. Then, technological themes and possibility have been surveyed. Although there are principle proposes and their verification of individual technologies for the technologies of hard photon generation, regulation and utilization, they are still far from the practical applications. For the photon source technology, the laser diode pumped driver laser technology, laser plasma photon source technology, synchrotron radiation photon source technology, and vacuum ultraviolet photon source technology are presented. For the optical device technology, the multi-layer film technology for beam mirrors and the non-spherical lens processing technology are introduced. Also are described the reduction lithography technology, hard photon excitation process, and methods of analysis and measurement. 430 refs., 165 figs., 23 tabs.

  14. History of Miike mine; Miike tanko gijutsu no sokuseki

    Energy Technology Data Exchange (ETDEWEB)

    Kodama, K. [Mitsui Mining Co. Ltd., Tokyo (Japan)

    1997-06-20

    Miike mine came to a close in March, 1997. This report looks back at its long history from a technological points of view. Before the Meiji era, coal from the Miike mine was used to produce salt in Kyushu and Setouchi, burned in the Nirayama reverberating furnace, and supplied to Mathew Calbraith Perry`s fleet visiting Japan. After the Restoration of Meiji, the mine was placed under the Government who mechanized it for increased production in the European fashion. The ownership was later transferred to private companies who advanced to exploit mines at other locations, adopted steam-driven drainage pumps to deal with gushing ground water, and improved transportation means and harbor facilities. The First World War triggered off the application of chemical knowhow to coal, which resulted in the production of coke by carbonization, preparation of ammonium sulfate from gas liquor, and chemical dyes and explosives from tar. A volume of gas produced during coal carbonization was effectively used to drive gas engines for company power generation (some for security). As the production scale enlarged, a pit reached a level as deep as 424m in the sea bottom, conveyers were provided in inclined pits, and a 191m-deep vertical exhaust pit for an artificial isle and a 506m-deep air intake pit were constructed, one after the other. During the 110 years under non-Government management, a total of 289,412,000 ton of coal was mined. 4 figs.

  15. Development of new construction technology; Seko shin gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Ikemura, M.

    1994-07-10

    Recent trend in construction technology employed in the construction industry is presented. Continuous underground wall method, shield pipe jacking method, and concrete bridge erection method have been developed. In the field of pneumatic caisson method, remote control for stereoscopic vision with a 3D camera and remotely operated recovery of drilling machine are being employed. In the case of the RCD method, remotely operated green cut device has been introduced for labor saving. For the shield tunneling method, technological development for larger cross section and modified cross section has been carried on actively as well as development for labor-saving and unmanned controlling. Development of direction control in small diameter pipe jacking method is in progress. NATM method is a typical construction method for mountain tunnels. Technology to learn the area and the amount of soil has been developed wherein photographic surveying and GPS are used for rapid work progress measurement. Development of rationalization technology for construction, automations of works, and rationalization technology for construction plan control are outlined. 23 refs., 4 tabs.

  16. Bonded structure application for aircraft. Kokuki ni okeru secchaku gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, O. (Japan Airlines Co. Ltd., Tokyo (Japan))

    1991-01-05

    Adhesives play an important role in a technology of the aircraft structure for which lightness and strength are required. The paper explains the present situation of bonding technology employed for aircraft, the honeycomb structure, production of composite materials and the related problems. Advantages and purposes of employing adhesives as substitutes for fasteners like screws, rivets, etc. are as follows: decreases in stress concentration, weight reduction, smoothing of surfaces, improvement of acoustic fatigue by adhesives flexibility, prevention of gas-liquid leakage. Epoxide adhesives are mainly used for aircraft. Together with tear straps, which are metal-metal bonded to the rear fuselage plate of aircraft, and waffle doublers, an aluminium honeycomb sandwich structure, whose weight is 1/7 of an aluminium plate same in rigidity, is used in such parts of aircraft as spoilers, outer plates of flaps, etc. The problem of the bonded structure is detachment. Therefore, how to prevent, discover and repair it is most important. 3 figs.

  17. Technique of CWM distribution system; CWM ryutsu chukei system gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Konno, K. [Center for Coal Utilization, Japan, Tokyo (Japan); Tanaka, M.

    1996-09-01

    It may be intended that CWM is manufactured in areas near coal producing areas in overseas countries and imported as a product requiring lower handling cost than in bulk products. In order to achieve this idea, it is necessary to establish a distribution and relaying system for product transportation inside and outside the country, including relaying bases for receiving, loading and storing the product. This paper reports results of the demonstration tests performed since 1992 to 1996. In the tests, CWM made from Chinese coals was transported from Shijiu Port to the Hibiki relaying base in the city of Kita-Kyushu on 5000 DWT ocean vessels, unloaded, stored, and loaded again on 700 DWT domestic vessels for distribution to users. Since the inauguration of transportations, 40,000 tons of CWM were delivered yearly to the Okayama plant of Tayca Company, and about 20,000 tons to the Mizushima power plant of the Chubu Electric Power Company over a period from 1995 to 1996. During the period, a number of findings were acquired in different aspects, including quality control of incoming and outgoing CWM, stability in quantity and properties, loading and unloading works, and transportation. Although reduction in subsidence during transportation and storage was indicated desirable, the practical applicability was verified for the relaying system as a whole. 4 refs., 15 figs., 3 tabs.

  18. Photon technology. Laser process technology; Photon technology. Laser process gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For developing laser process technology by interaction between substance and photon, the present state, system, R and D issues and proposal of such technology were summarized. Development of the photon technology aims at the modification of bonding conditions of substances by quantum energy of photon, and the new process technology for generating ultra- high temperature and pressure fields by concentrating photon on a minute region. Photon technology contributes to not only the conventional mechanical and thermal forming and removal machining but also function added machining (photon machining) in quantum level and new machining technology ranging from macro- to micro-machining, creating a new industrial field. This technology extends various fields from the basis of physics and chemistry to new bonding technology. Development of a compact high-quality high-power high-efficiency photon source, and advanced photon transmission technology are necessary. The basic explication of an unsolved physicochemical phenomenon related to photon and substance, and development of related application technologies are essential. 328 refs., 147 figs., 13 tabs.

  19. Groupware technology for education. Groupware gijutsu no kyoiku eno oyo

    Energy Technology Data Exchange (ETDEWEB)

    Ishii, H. (Nippon Telegraph and Telephone Corp., Tokyo (Japan))

    1992-12-10

    The present paper describes the application of groupware technology to the field of education. The Team Work Station is a multi-media groupware which provides a collaborative workspace holding continuity with personal workspaces of dispersed individual users. Its educational effectiveness is reviewed in reference to an example where a remote guidance of calligraphy was experimented using the translucent overlay technique for desk image. A comparison was made between the case where the images of a teacher and a student are overlaid and the case where only each other's desk image is seen, and the former was confirmed to be superior from the viewpoint of effectiveness in time-saving and easiness of guidance. Two users separated by a large distance can converse mutually while each is looking at the other's face with a communication media called Clear Board, actually a large glass plate in between, and can draw on the board from both sides. The utility of the board exists in the possibility of mutual communication of non-verbal information such as expression and eyes. 10 refs., 6 figs.

  20. Advanced seismic imaging technology. Data acquisition (computer simulation of elastic wave propagation); Koseido imaging gijutsu. Data shutoku gijutsu (danseiha simulation)

    Energy Technology Data Exchange (ETDEWEB)

    Tsuru, T. [Tech. Research Center, Japan National Oil Corp., Tokyo (Japan)

    1995-11-10

    Development of software was examined for the purpose of making basic data for an advanced seismic imaging technology by obtaining a seismic exploration data from a complicated underground structural model through a numerical simulation. The result in fiscal 1994 was as follows. A dimensional division difference calculus is superior in the stability and accuracy of numerical calculation and capable of calculating by dividing into one dimensional differences. Attenuation items were added which were due to medium absorbing effect by Maxwell viscoelastic model, and simultaneously a function was added which was capable of dealing with the multi focuses and a group installation of geophones. A pseudospectral method is a kind of difference calculus for numerically solving a partial differential equation, and capable of dividing an underground structural model in lattice and calculating the field on the lattice point. The space direction is differentiated by calculating Fourier series without difference approximation; and, therefore, the number of lattice may be reduced to 2 for the maximum wave length; namely, a lattice interval may be coarsened to reduce calculation time. An improvement was made on the parallel calculation part of the program for two-dimensional analysis developed in the preceding fiscal year, enabling reduction in the calculation time. 4 figs.

  1. Idea of environmental catalyst and its application; Kankyo shokubai no hasso to sono riyo

    Energy Technology Data Exchange (ETDEWEB)

    Inumaru, K. [The University of Tokyo, Tokyo (Japan)

    1997-10-20

    The catalyst creating environmental conservation and comfortable environment is generally named an `environmental catalyst (EC).` EC is roughly classified into direct and indirect type ECs. Purification catalysts for automobile exhaust gas, and catalysts for chemical production process are under investigation as direct and indirect type ECs, respectively. The catalyst was found which can remove NOx under the coexistence of oxygen by using hydrocarbon as reductant. In addition, the practical exhaust gas purification catalyst was also developed for lean-burn engines by combining noble metal catalysts with NOx absorbing materials or zeolite superior in reductant adsorbing power. {epsilon}-caprolactam as raw material of nylon 6 is synthesized from cyclohexanoneoxime through Beckmann` rearrangement reaction. Zeolite system solid catalysts using no ammonia are under investigation. An environment-friendly synthesis method using not phosgene but catalyst was proposed for production of dimethyl carbonate. How to utilize catalysts for global material circulation remains unsolved for the future study. 5 refs.

  2. Biotechnological application of marine microalgae; Kaiyo sorui no biotechnology eno riyo

    Energy Technology Data Exchange (ETDEWEB)

    Matsunaga, T.; Takeyama, H. [Tokyo University of Agriculture and Technology, Tokyo (Japan). Faculty of Technology

    1995-09-10

    There are many kinds of micro algae who have adapted to extremely diversified marine environments. Screening of new useful materials from marine micro algae has been carried out. High density culture system using photo-bioreactor and genetic manipulation technology have been employed in order to enhance productivity of those materials from marine micro algae. We have found many useful materials, such as UV-A absorbing substance, plant growth regulating factor, polysaccharides, unsaturated fatty acids and antibiotics, from marine micro algae. Here, we describe production of those useful materials and their application. Marine coccolithophorid algae convert CO2 to CaCO3 and they have been expected to contribute to CO2 recycling system. Metabolic engineering in marine microalgae, especially cyanobacteria, has been established. Eicosapentaenoic acid is successfully synthesized in marine cyanobacterium which can not synthesize it. 41 refs., 14 figs., 5 tabs.

  3. Performance test of solar energy distillation system; Taiyonetsu riyo kaisui tansuika system no zosui seino shiken

    Energy Technology Data Exchange (ETDEWEB)

    Kawahara, T.; Toyoshima, Y. [Keio University, Tokyo (Japan); Narasaki, Y.; Kamiya, I. [Ebara Corp., Tokyo (Japan); Sato, H. [Keio University, Tokyo (Japan). Faculty of Science and Technology

    1997-11-25

    In order to develop a seawater desalination equipment utilizing solar heat, a performance test was performed on a three-stage solar heat vacuum distiller. The equipment can evaporate and condense water at low temperatures by reducing the pressure in a distilling section. Solar heat is collected by a heat collecting plate, by which water as the working fluid is evaporated and moved to a heat conducting section in an evaporation pipe in a state of steam. The steam is condensed in a low-temperature heat conducting pipe, the heat is released outside the heat conducting pipe, and seawater is evaporated under low pressure condition. The working fluid is circulated for repetitive use. Solar cells are used as a motive power source for a vacuum pump, hence the system is self-sustainable even if installed in a desert area and the like places. The construction is simple, highly durable, and easy in maintenance. The system has high water producing performance, uses no harmful substances whatsoever such as fluorocarbons, and is a friendly system to the global environment. Because of evaporation at low temperatures, heat loss to the surroundings and sensible heat due to temperature rise are small, and the system response is quick. The solar heat can be utilized more effectively as multiple effects. When a heat collecting plate of 7.76 m {sup 2} was used, maximum yield of 105.45 kg/day was obtained. The system`s distillation efficiency is higher than other types of solar heat utilizing distillers. 7 refs., 5 figs.

  4. Use of natural energy in hyper-skyscrapers. Chocho koso kenchiku ni okeru shizen energy riyo

    Energy Technology Data Exchange (ETDEWEB)

    Unno, K. (Takenaka Komuten Co. Ltd., Osaka (Japan))

    1992-05-30

    Construction of large scale hyper-skyscrapers( more than 500 m high ) by next century is coming to inevitable stage, and the problems regarding supply and consumption of energy/resources together with the use of natural energy in such construction are described. Transport of water at high direction, conformity of supply and save energy are pointed out as problems for supplying water energy. Calculated amount of required electrical energy used by electrical appliances of sky-city ( 1000 m high ) has been about 440,000 KVA, and necessity of autonomous supply network system for electric power and heat supply is stressed. For sky-city, 1000 m, use of new energy( supply of 20% of total electric power is possible with optical generation, wind power generation) and the use of unused energy ( draft generations, generation from refuse incineration, pumped storage generation ) are emphasized. Effective supply of water resource like refuse of waste water is cited. 3 refs., 4 figs., 1 tab.

  5. Solar energy drying for agricultural products. Nosanbutsu kanso ni okeru taiyonetsu riyo

    Energy Technology Data Exchange (ETDEWEB)

    Sato, Jun' ichi (National Grassland Research Inst., Tochigi, (Japan))

    1989-09-30

    Natural drying was previously used to dry agricultral products but artificial drying is widely used today with the diffusion of agricultural machines. Therefore, solar energy utilization to dry agricultural products depends on how effective solar energy is utilized in addition to the mechanized artificial drying. Further, drying of agricaltural products varies in respective countries and local areas because water content in products varies on weather conditions. Wheats harvested in U.S. contain fewer water content and can be dried for 3 months in a large storing bin by natural ventilation and cn be shortened to 1 month by placing a solar collector before the blower. Many Japanese farmers utilize vinyl houses and drying is made by combining vinyl house, and flat floor type dryer, circulating dryer or rotary stirring dryer. Moreover, 100% utilization of solar enegy results higher cost, so that in many cases, combined utilization with oil firing is made. Moderate heat such as solar energy is suitable for drying of agricultural products to maintain the quality and it is desirable to develop any reasonal technique. 14 refs., 12 fig.

  6. Almetax and industrial technology total center Shigaraki ceramic industry technology test field in Shiga Prefecture; Arumetakkusu to Shiga-ken kogyo gijutsu sogo senta sigaraki yogyo gijutsu gijutsu shikenjo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Almetax and industrial technology total center Shigaraki ceramic industry technology test field in Shiga Prefecture. Almetax of the aluminum building material and industrial technology total center Shigaraki ceramic industry technology test field in Shiga Prefecture developed the light thermal insulation foaming tile in the cooperation. This is a tile using the ash which arises by the renewal process of the aluminum. The aluminum ash was mixed with the feldspar of the Shigaraki-made, and it was burnt at the low temperature. In the lightness under the half of usual tile, it has the heat retaining property over 3 times. almetax was being planned a waste loss thermal insulation a stone two bird environmental consideration type goods begin to. The aluminum ash is mixed with the feldspar, and by the process burnt at 1200-1250 degrees C, it decomposes, the aluminum nitride in the ash foams. Therefore, the stoma which was homogeneously independent in burnt tile is possible. It is lightly easy to be handled, and it is a feature that the heat retaining property is high. There is the strength from the foaming concrete, and the water absorption rate is low. The aluminum reconstruction technique of almetax was made to fuse with the technology of the ceramic industry technology test field of the pottery lightening. almetax studies the cost reduction of the decontamination processing of the ash. It aims at cost of product of 3 thousand yen /m{sup 2} of usual tile level. The commercialization as partition between two rooms of external wall and life space of the building has been planned. The gross discharge of the domestic aluminum ash has been estimated with annual about 192 thousand tons. Though the part is utilized as a secondary material of the iron and steel refining, it deals with the excess minute as an industrial waste. (translated by NEDO)

  7. Development of newly engineering technology based on computer analysis for dust diffusion; Funjin kakusan kaiseki gijutsu wo kihon to shita atarashii engineering gijutsu no tenkai

    Energy Technology Data Exchange (ETDEWEB)

    Ishii, K.; Murahashi, Y.; Kawakami, H.; Tanaka, K. [Nippon Steel Corp., Tokyo (Japan)

    1997-07-30

    Nippon Steel has made a comprehensive survey of the space environment designing technology that can precisely cope with the needs required for a space in a plant in a very wide range from the ventilation problem in steel mill to the turbulence problem in semiconductor plant, through accomplishing the development of computer analysis technology for dust diffusion that can estimate and control `air flow` and `dust movement` in an electric angstrom [furnace plant]. This paper describes the basic concept for establishing the computer analysis technology for dust diffusion and the concrete measures to solve accompanying problems, and further enters into details how the new engineering technology has innovated technical measures to solve problems, the new engineering technology which introduces a concept of both estimation and control to attain objects such as to curtail the equipment cost and so by estimating the `air flow` and `dust movement` to create both a new flow and movement depending on needs. 3 refs., 20 figs., 8 tabs.

  8. Integrated practical technology for rationalization of production system in Miike coal mine; Seisan kozo kaikaku no tame no sogo shien gijutsu (Miike tanko ni okeru gijutsu kaikaku)

    Energy Technology Data Exchange (ETDEWEB)

    Furukawa, H. [Mitsui Mining Co. Ltd., Tokyo (Japan)

    1997-10-25

    This paper describes the improvement of production structure and the reduction since the latter half of FY 1990 in the Miike Coal Mine. The annual production was reduced from 4.5 to 2.35 million tons. The rationalization strategy is composed of the increase in productivity with intensive faces by introducing high performance mining facilities (MHP) and by modifying mining method, the mechanization of driving works, the simplification of underground structures, the reduction of indirect costs, and the rationalization of surface management departments. Faces were reduced to one or two by the MHP, and high operation rate and energy saving are achieved using self-advancing frames. Face moving period was reduced by rotating the MHP within the underground. Labor-saving of belt conveyors was achieved using built-up frames. For the gallery driving, a base gallery was excavated before production, and level driving was expanded through the base gallery. High-speed and systematic face driving was realized through in-seam driving by operating road header without using blasting. To avoid the decrease in operation rate due to unexpected faults or spring waters, early grasping system of face conditions was established, and environmental arrangement was enriched. The efficiency was improved from 96 in FY 1988 to 159 t/person{center_dot}month in FY 1995. 4 refs., 4 figs., 1 tab.

  9. Survey of the trend of technical development and industrial policies in Asian countries; Asia shokoku ni okeru gijutsu kaihatsu no doko to sangyo gijutsu seisaku ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A sharp rise in industrial productivity in Asia countries indicates a rising level of R and D technology. Since Japan has not clearly grasped the R and D ability in these countries, it has not given appropriate personnel/material R and D support to them. Therefore, for the purpose of exactly grasping the R and D ability of Asian countries (Korea, Taiwan, the Philippines, Indonesia and India) and studying an effective and appropriate method for R and D cooperation, a survey was conducted of R and D potentials in Asia and R and D support policies of the countries. As a result of the survey, the following are taken up as items to be considered: promotion of exchanges between Tsukuba, etc. in Japan and research/university towns and science parks being constructed in lots of countries, participation of private companies in high-tech joint work in cooperation with Japan, sending information from Japan using internet, etc. and exact grasp of needs at partner side, cooperation given to new comers without asking for research results (use of OB researchers, etc.) 25 refs., 39 figs., 59 tabs.

  10. Report on technological trend survey in fiscal 2000. Survey on bio-technology development strategy; 2000 nendo gijutsu doko nado chosa hokokusho. Bio technology gijutsu kaihatsu senryaku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Survey and research have been performed on bio-technologies as to their seeds of technological development projects to be worked on by the government from the viewpoint of industrial utilization technologies. In the survey on the trends of research and development and technological development on human-genomes, the survey has been done on the status of execution in the Millennium Genome Project, and how the works related to human-genomes are done at the bio-related government based research organizations and the private sector research organizations. Trends related to the human-genome research in overseas countries were also surveyed. With regard to the future prospect of research and development in the post genome age, discussions were given on the result of the questionnaire survey on opinion leaders in the industrial, governmental and academic areas. In discussing the viewpoint of the industrial utilization technologies related to human genomes, candidates assumed usable in the genome related application fields were discussed, and a basic framework of a technological map was prepared. Based on the results thereof, the technological development areas anticipated to be important in the future were extracted, and the technological development themes were discussed. (NEDO)

  11. Survey of the situation of technology succession. Databases of articles including in industrial technology museums; Gijutsu keisho jokyo chosa. Sangyo gijutsu hakubutsukan shuzohin D.B. hen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To promote the succession of history of and the creative use of industrial science technologies, the paper made lists and databases of the articles of industrial technology museums and material halls in Japan. Record/preservation and collection/systematization of history of the industrial technology is useful for forming bases necessary for promotion of future research/development and international contribution. Museums and material halls are the fields for making comprehensive and practical activities. The data were made as one of the basic databases as the first step for promoting activities for examining the technical succession situation in a long term range continuously and systematically. In the classification of the data, the energy relation was divided into electric power, nuclear power, oil, coal, gas and energy in general. Others were classified into metal/mine, electricity/electronics/communication, chemistry/food, ship building/heavy machinery, printing/precision instrument, and textile/spinning. Moreover, the traffic relation was classified into railroad, automobiles/two-wheeled vehicles, airline/space, and ships. Items were also set of life relation, civil engineering/architecture, and general. The total number of the museums for the survey reached 208.

  12. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Survey by region/industry in India; Kankyo chowagata sekitan riyo system kanosei chosa. Indo ni okeru sekitan riyo gaikyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A survey was made in India which is a coal producing/consuming country following China in Asia and where coal is used for about 60% of the primary commercial energy. The survey was conducted on coal production/distribution/utilization and environmental issues, aiming at studying feasibility of introducing the environmentally friendly coal utilization system into every industry including the residential/commercial one, and at implementing a comprehensive master plan including Japan`s international cooperation. Total power source facilities in fiscal 1995 are 83.3 million kW, 64% of which are coal thermal power facilities and generated 260 TWh, 69% of the total output energy. Main commercial energy sources are coal, oil and natural gas, and oil is self-sufficient. The survey this time did not examine very well the actual state of the environmental pollution problem caused by the coal utilization. Indian coal is high in ash content but low in sulfur content, and therefore, SOx polluting air has not been a very important problem so far, but soot/smoke is almost the problem. Further, ash treatment after combustion at boilers, etc. is expected to be a big problem in the future. 49 figs., 88 tabs.

  13. Feasibility survey of the environmentally-friendly coal utilization system. Feasibility survey of the environmentally-friendly coal utilization system in the Philippines; Kankyo chowagata sekitan riyo system kanosei chosa. Philippines ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With relation to the coal of the Philippines, where the expansion of the use of coal as a substitute for petroleum/plant fuel is aimed at, the paper grasped the situation of coal production/development, the trend of coal import and domestic distribution, the coal utilization trend, and environmental problems, and analyzed the situation of coal utilization/spread by industry including the commercial/residential use. The purpose of the survey is to draw up a master plan for the introduction of the environmentally-friendly coal utilization system. As to the use of environmentally-friendly coal technology which should be adopted to the coal mining industry and commercial/residential sector, cited are the introduction of coal preparation technology and power transmission technology, and the development/spread of briquette as a firewood substituting fuel. In the electric power sector, the problem is the treatment of ash after combustion and the effective use. Relating to the treatment of flue gas, there is no installation at all of desulfurization facilities and denitrification facilities. In the cement industry sector, they wish to return fuel from heavy oil to coal. For it, it is necessary to study dust preventive measures. In the other sectors, coal hasn`t been used very much. An increase in coal demand is not expected also in the future, and big problems concerning coal haven`t occurred. 42 figs., 64 tabs.

  14. Fiscal 1997 survey report. Feasibility study of the environmentally friendly type coal utilization system (survey of the coal utilization in Pakistan); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Pakistan ni okeru sekitan riyo gaikyo chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper made a literature survey, hearing survey, site survey/study on the coal in Pakistan such as the coal utilization system and the environmental situation, etc., and aimed at pre-examination for the survey of the introduction of the environmentally friendly type coal utilization system to be planned in Pakistan in the future. The examination, data collection and preparation were conducted in terms of the following items: the structure of coal consumption in energy supply, structure of coal consumption, mainly of domestic brown coal consumption, the situation of coal utilization by industry and by region, environmental problems caused by coal utilization such as air pollution, the trend of policies of environmental regulation, etc. The literature on the following was obtained and surveyed: the situation of economy/energy in Pakistan, coal utilization technology by industrial field, and environmental protection technology. The hearing survey was made to institutions concerned, corporation groups and men of learning and experience. Site surveys were conducted for the typically selected coal utilization equipment and existing environmental protection equipment. 66 figs., 56 tabs.

  15. Research and development of system to utilize photovoltaic energy. Survey on system and peripheral technologies for utilization of photovoltaic power; Taiyoko hatsuden riyo system no kenkyu kaihatsu. Riyo system ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the survey results on systems and peripheral technologies for use of PV power in fiscal 1994. On the case study of PV communities, as housing zone PV community, Seibu Kitanodai housing estate mainly composed of detached houses, and the Suwa area of Tama New Town of apartment houses were selected to study PV power generation on a roof, wall and window. The result clarified that generated energy of a detached house reaches 3-4 times as much as consumed one, that of an apartment house is nearly equal to consumed one, and power generation of nearly 380MW is possible based on expected housing supply until 2000. As urban core zone PV community, the survey result on Ebisu Garden Place clarified that the expected PV power supply rate is 10% or more, 20% and 30% or more for hotel and office buildings, high-rise apartment building more than 30 stories, and medium-rise one of 10 and several stories, respectively. In Sakura industrial estate, the maximum generated power was nearly equal to consumed power in a weekday, and as inverse power flow in a holiday was considered, the annual PV power supply rate was extremely high.

  16. Clean energy and agriculture. 5. ; Utilization of biomass for energy. Clean energy to nogyo. 5. ; Biomass energy no riyo

    Energy Technology Data Exchange (ETDEWEB)

    Haga, K. (National Institute of Agro-Environmental Sciences, Tsukuba (Japan))

    1992-10-01

    This paper reviews characteristics of biomass energy, which is regarded as renewable and clean, and present features of its utilization as well as their problems. Biomass energy resources are substantially such cultivated plants as saccharine crops, fatty and oily crops, petroleum plants, and aquatic plants. In addition, organic waste including agricultural and livestock waste is also the other important resource. Utilization of biomass for energy can be realized through applying such conversion technologies as methane fermentation, alcoholic fermentation, and thermal decomposition to the biomass resources. For the utilization, it is most important to make much of the viewpoints such as durable utilization corresponding to reproduction, competitive relation with food crops, and environmental protection. Biomass energy should be thought to be strictly limited to small-sized and regionally distributed energy. Therefore, it will be said that agriculture is appropriate to utilize biomass energy because it can practice both production and utilization of the biomass. 22 refs., 2 figs., 4 tabs.

  17. `Power storage system` dealing with leveling of electric power use; Denryoku riyo no heijunka ni kotaeru `denryoku chozo system`

    Energy Technology Data Exchange (ETDEWEB)

    Igarashi, M. [Meidensha Corp., Tokyo (Japan)

    1996-06-28

    An overview is given on the development situation of a Zn-Br battery as a power storage system. The system is aimed at storing excess power at night and supplying the on-load demand during daytime. The power storage technology requires a large output and capacity of MWh level, long term stability and durability, and cost as low as pumped storage power generation. Four kinds of batteries have been examined to cope with the conditions, in which development of Zn-Br batteries along with Na-S batteries is in progress towards practicability. As a power conversion method for this system, GTO has been employed for a large capacity unit and IGBT for a medium/small capacity unit. The reliability of the Zn-Br batteries against leakage was improved by laminating each cell by hot plate welding. The service life was improved by using a material with a high bromine resistance in place of the conventional electrode constituent material. Although the battery efficiency was influenced by each resistance of electrode, film and electrolytic solution, distance between electrodes, temperature, etc., these correlations were clarified so as to establish the simulation technology. At present, the system realizes 50kW and 40kWh/m{sup 3}. 1 ref., 8 figs.

  18. Effective use of active solar system on a residence; Jutakuyo taiyo enerugi akuteibu yuko riyo hoshiki ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kamiya, Y. [Kanto Gakuin University, Yokohama (Japan)

    1999-11-25

    In this paper, reduction of primary energy consumed in a residence was calculated for the application of combination and hybrid systems of thermal solar energy and photovoltaic generation. The relation between the cost of each system and reduced energy was investigated. A combination system is more effective than a hybrid system for a residence in cost bases. At present time, the system of which area of panel less than 20 % of the floor area should be a solar system because of high cost of a PV system. And this percentage goes down to 5 % when the cost of PV system down to that of solar system in panel area bases. For a system larger than this, adding PV panel to a solar system, a combination system should be formed. (author)

  19. Generator cooling hydrogen purity improvement system using hydrogen absorbing alloy; Suiso kyuzo gokin riyo hatsudenkinai suiso jundo kojo system

    Energy Technology Data Exchange (ETDEWEB)

    Takeda, H.; Kabutomori, T.; Wakisaka, Y. [Japan Steel Works, Ltd., Tokyo (Japan); Nishimura, Y.; Kogi, T.; Sato, J.; Haruki, N. [Kansai Electric Power Co. Inc., Osaka (Japan); Fujita, T. [Mitsubishi Electric Corp., Tokyo (Japan)

    1998-09-15

    Described herein is a system which uses a hydrogen-absorbing alloy to purify a hydrogen gas stream used as a coolant for power generator. Hydrogen in the stream containing impurities such as nitrogen can be selectively absorbed by sufficiently cooled hydrogen-absorbing alloy. Impurity gases concentrated in the alloy pores are released, and then the alloy is heated to release hydrogen. This purifies hydrogen to at least 99.99%. This system essentially consists of an hydrogen-absorbing unit, hot water production/supply system which circulates hot water of 80 to 90degC to release hydrogen out of the alloy, pretreatment unit, and temperature and pressure sensors. It is confirmed, by the test in which the system is connected to a commercial power generator of 600MW, that the system can be continuously operated to purify hydrogen to at least 99.9% for an extended period. 4 refs., 18 figs., 1 tab.

  20. Incineration and its heat utilization for sludge and spent grains recycling. Beer kasu dassui odei shokyakunetsu no yuko riyo

    Energy Technology Data Exchange (ETDEWEB)

    Ogawa, T. (Asahi Breweries, Ltd., Tokyo (Japan))

    1993-06-01

    This paper introduces a case of effectively utilizing dehydrated sludge and spent grains as a boiler fuel, and industrial wastes from breweries to reduce the amount of wastes. These wastes show as high water content as 80% to 83%, but dried wastes are constituted of hydrocarbon, excepting ash. Especially beer spent grains have a calorific power of close to 5000 kcal/kg. The key point is how to blow off water efficiently (existence of a dehydration and drying process accompanies such advantages and disadvantages as facility simplification, necessity of auxiliary fuels, and generation of high-BOD water associated with beer lees dehydration). As a result of discussions and tests, a fluidized bed boiler (with a pressure of 14 kg/cm[sup 2] at a flow rate of 8.1 t/h) was adopted. Wastes to be burned dry up before they reach the floor of a fluidized furnace and are burned on the floor, and any unburned components are burned completely in a secondary combustion chamber. The boiler has been operating smoothly since the operation has started in 1989. An integrating comparison of various costs has resulted in annual economy of 81 million yen. 7 figs., 5 tabs.

  1. Application of membrane technology to food industry; Shokuhin kogyo bun'ya ni okeru maku riyo

    Energy Technology Data Exchange (ETDEWEB)

    Kamata, T.; Nakajima, M. [Univ. of Tsukuba, Tsukuba (Japan)

    2000-08-05

    In the food industry, the membrane technologies are used practically for concentration of fruit juice and milk, etc. as reverse osmosis, for decolorization and desalination of liquid seasoning as nanofiltration, for bacteria elimination, etc. as micro-filtration, for recovery and purification of the protein as ultra-filtration, and for kitchen salt manufacturing and desalination as electrodialysis. In this paper, the state of utilization of membranes and the trend of recent research and development in the food industry are described. At first, a utilization of membranes in the dairy industry field, the fruit juice processing field, the alcoholic beverage field, the seasoning field, the honey purification field, the protein field and the fats and oils processing field are described. Next, as a film emulsification technology, a preparing process of W/O emulsion in which the pressurized water phase is penetrated through a hydrophobic membrane into the oil phase of the opposite side, and a preparing process of W/O emulsion in which the pressurized oil phase is penetrated through a hydrophilic film are described. The emulsification technology using the micro-channel made of the silicon chip, which is developed by the author is introduced. (NEDO)

  2. Studies of a dynamic type ice storage system using supercooled water; Kareikyakusui riyo dainamikku gata shochikunetsu shisutemu no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Ito, S.; Hashimoto, A.; Miura, N. [Kanagawa Inst. of Tech., Kanagawa (Japan); Ikemoto, Y.

    1999-11-25

    An ice storage system using supercooled water was constructed and the performance was tested. The system was consisted of a storage tank with the volume of 1.2 m{sup 3} in which slurry-ice was stared, a spiral double-tube heat exchanger 22 m long for making supercooled water by brine, a refrigerating machine of the rated capacity of 2.2 kW, reservoirs for cold and hot brine, heaters, and pumps. The system was able to be operated for more than 5 hours without freezing mostly if the degree of supercooling was less than about 2 degree C. The COPs based on the power of the refrigerating machine and system were about 1.3 and 0.7, respectively. (author)

  3. Investigation on development of advanced materials by solvothermal technique; Sorubo thermal hanno riyo senshin zairyo kaihatsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Solvothermal reaction is reaction under high temperature and high pressure, which is expected to fabricate new functional materials. In this study, the materials are classified into two fields, i.e., inorganic materials, metals and their composites and organic materials and their composites. The current status of R and D of production and processing technology in each field is surveyed and the prospect of it is discussed. For the inorganic materials, metals and their composites, it is explained that very fine metal oxide particles, complex oxides, single crystals, whiskers, compounds with layer structure, metastable compounds, ion conductors and catalysts with high ability could be produced only by controlling the solvothermal reactions in atomic order. For the organic materials and their composites, surveyed results of the solvothermal technique using non-aqueous solutions are mainly provided. The necessity of a national project for researches on the solvothermal reactions is proposed from the viewpoint of resource, environment and energy. 777 refs., 38 figs., 26 tabs.

  4. Application of a kinematic GPS to ship maneuvering trials; Soju seino shiken eno kinematic GPS no riyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Hirata, N.; Kose, K.; Takase, S.; Ito, R. [Hiroshima University, Hiroshima (Japan). Faculty of Engineering; Nakamura, Y.; Terada, K.

    1997-09-04

    There has been a great progress in position measurement capability of well-known Global Positioning Systems (GPS) and the accuracy has been remarkably improved in the cm order, especially in a kinematic GPS (KGPS) which is based on the phase identification of GPS carrier waves. For the KGPS, interference measurement type differential GPS (DGPS) can be applied to moving ship. Accuracy of the KGPS has been examined. The sea trials of the coastal cargo ship have been conducted for grasping the performance improvement during trials by means of the KGPS. High accuracy in the measurements was evaluated about 2 cm horizontally and 5 cm vertically. The accuracy was occasionally degraded by the cycle slip generated with multi-pass and radio cutout. It is required to consider the setting position of antennas. Although the KGPS can determine the position in remarkably high accuracy, the direction can not be determined from a single measurement. It is required to determine the angle by combining the measurements. From the measurements during ship maneuvering trials using the KGPS, it was found that information required for evaluating the maneuvering performance, such as longitudinal and lateral velocities, turning angle velocity, and yawing angle, can be accurately determined. 5 refs., 8 figs., 5 tabs.

  5. Examination of actual utilization status on small scale wind power generation system; Kogata furyoku hatsuden system no riyo jittai chosa

    Energy Technology Data Exchange (ETDEWEB)

    Ito, K.; Matsui, T.; Inaoka, N. [Kansai Electric Power Co., Inc., Osaka (Japan); Miura, R. [Chiyoda Dames and Moore Co. Ltd., Tokyo (Japan)

    1994-12-01

    Although almost all of the wind mills for power generation with a small scale were self-manufactured in the past, since 10 and several years ago they have become to be regularly made as the industrial products. Even nowadays the small scale wind mills remaining in a market, or the small scale wind mills newly come to a market have adopted a contemporary advanced technology, and therefore in the utilization styles peculiar to the wind mills, an unique genre has been built. As for a scale of the wind mills, a system linking could also be considered, a scale of around 10 kw class was set up as a standard. As for total number of 98 units, a power generation scale could be classified into 41 kinds, from only 9 w as a small scale to 20 kw as a large scale. Now in this case 28 units of 1 kw - 5 kw class wind mill were most much collected. Many small scale wind mills actually used in Japan are often for the exhibits and the test/technological development. Also the locations where can not easily use a power from a power company can be frequently seen, however, like the huts and the light houses at a remote place. 4 refs., 9 figs., 2 tabs.

  6. ONR Far East Scientific Bulletin, Volume 7, Number 4, October-December 1982,

    Science.gov (United States)

    1982-12-01

    as the Very Large Scale Integration (VLSI) Technology Research Association ( Choo LSI Gijutsu Kenkyuu Kumiai). Money was provided to the Association in...Stanford University Press, 1982. Japan: The Government-Busineea Relationehip. Eugene J. Kaplan. U.S. Depart- ment of Commerce, 1972. "The Japanese

  7. Technology of latent-heat recovery for boiler system; Boira ni okeru sennetsu kaishu gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Moriyama, T. [Tokyo Gas Co. Ltd. (Japan)

    1996-08-01

    The boiler has reached the highest degree of completion among combustion equipment and is highly efficient. In order to enhance its efficiency further, it is ordinary to recover the retention heat of the combustion exhaust gas, but due to the problem of low temperature corrosion caused by the sulfur content in fuel resulted from a temperature drop of the exhaust gas, heat recovery has been done not sufficiently. In this article, an example is introduced to plan the betterment of efficiency by application of a latent heat recovering economizer to a sugar manufactory and a report is made on the energy saving effect by recovering the latent heat and a study on the quality of the material for the latent heat reclaimer. The above latent heat reclaimer is a system which takes advantage of the feature of the natural gas reportedly having no sulfur content, brings down the temperature at the outlet of a heat exchanger of the boiler exhaust gas to below the dew point, thereby recovers the condensed latent heat of the vapor in the exhaust gas and utilizes it for heating up the boiler feed water. In this example, the line of an already installed boiler has been partially modified and only a latent heat reclaimer has been installed newly. The increase of efficiency has been as high as 5.28%. 5 figs., 5 tabs.

  8. Technology for improving the performance of semiconductor process; Handotai process no koeinoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-29

    Introduced herein is a report on technology for improving the performance of semiconductor processes, the report resulting from the researches conducted by the submicron rule manufacturing technology research sub-committee. Chapter 1 treats the improvement of lithography, discussing the characteristics of, materials for, and problems in the chemical amplification type resist. Chapter 2 discusses the improvement of the thin film forming technology, summarizing the elements of surface reaction, and technologies relating to the formation of multi-layer wirings and contacts, in Si-based CVD technology. Chapter 3 describes the devices used in and findings obtained from the experiments conducted aiming at realizing a higher precision etching technology. Chapter 4 reports ULSI material technology, centering about the mechanism of bonding, characteristics of junction boundaries, bondage between different substrates, formation of super-fine silicone layer, improvement of characteristics and simplification of processes, and the comparison between bonded SOI (silicon on insulator) and SIMOX (separation by implanted oxygen). Chapter 5 introduces experimenting devices and the results of experiments regarding the growth of natural oxidation film and the examination of surface reactions, for which the technology of in-situ FTIR-ATR (Fourier transformation infrared-attenuated total reflection) is utilized. Chapter 6 discusses the need for and the merit and demerit of the surface control cluster tool for use in the manufacture of the semiconductor device. 219 refs., 117 figs., 10 tabs.

  9. Production technology for actual fields in severe corrosive environments; Fushoku kankyo jitsu fuirudo jisshoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Takai, T.; Kaneda, E.; Shoda, S.; Tochikawa, T. [Japan National Oil Corp., Tokyo (Japan)

    1998-10-30

    Joc has been developing the hardware and software, in corrosion and protection research project which has tree subthema as follows with collaborators. 1. From 1985 JNOC and JRCM have been developing the Coated TBG. Last year, we selected a gas well for the evaluation in Astrakhan Gas Field in Russia where production gas contains 25 % H{sub 2}S, and started the verification test of the corrosion resistance of the Coated TBG. 2. Two new coating technologies (Plasma sintering and YAG-laser cladding technology) are tried to apply for coating of well equipment. The former technology aims at improving erosion-resistance of drilling tools, for instance, blade stabilizer. The later aims to improve erosion-resistance and corrosion-resistance of production equipment which have complex curved surface or narrow sections. 3. JNOC and Nippon Steel have been developing the Material Selection Program for Tubing Strings. The prototype program has been produced, which includes some new items, galvanic corrosion effect in combination strings, corrosion properties of new material (modified 13Cr), reflection on the environments in actual well, and including the material cost. The influence of fluid velocity, WOR and dew point upon the corrosion-rate will be estimated. (author)

  10. Production technology for actual fields in severe corrosive environments; Fushoku kankyo jitsu field jisshoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Kaneda, H.; Ihara, K.; Wasada, N. [Tech. Research Center, Japan National Oil Corp., Tokyo (Japan)

    1995-11-10

    Tests and studies were started for the verification of the coated tubing developed using the element technology introduced in the special study `Production Technology in High-Temperature Corrosive Environments`, for the development of oil exploring equipment serviceable in corrosive environments, and for the development of programs for selecting materials for use in corrosive environments. In connection with verification tests, investigations were conducted into the operating fields of domestic oil exploring corporations and into technical literature relating to the deterioration of basic materials in their resistance to SSC, and basic data were accumulated. In the efforts to develop equipment, it was decided that drilling stabilizer blades be developed by plasma sintering, that information be collected concerning technologies relating to functionally gradient materials, and that technologies be developed for YAG-laser cladding of flange seal surfaces and elbow inner surfaces. As for the development of material selecting programs, various tests were conducted into the 13Cr steel and super 13Cr steel for their SSC, total corrosion, and local corrosion, their performance was evaluated, and the limit of their serviceability was determined by mathematical treatment. 7 figs., 3 tabs.

  11. Process improvement technology for petrochemical plant; Sekiyu kagaku puranto ni okesu purosesu kaizen gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, Shin

    1999-05-05

    Before, GTC technology Co. was a manufacturer of the tray as a Greenwich technology. It is the subsidiary, which undertakes technology and licence of the engineering firm in U.S.A. at present. It carries out besides the technology licence support in the startup for the prolonged driving of technical service, operating condition of the plant of improvement and optimization and, etc. Has made separation and purification technology, which made extractive distillation to be a beginning good and has the process improvement technology to the PTA (high-pure terephthalic acid) from BTX (benzene toluene xylene) of petrochemical plant. (NEDO)

  12. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the ultimate manipulation technology of atoms and molecules; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho (genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes R and D of the ultimate manipulation technology of atoms and molecules (atom technology). The R and D aims at establishment of observation/manipulation technology of atoms and molecules as common basic technology in various industrial fields such as new material, electronics, bio-technology and chemistry. The R and D thus aims at establishment of observation/manipulation of solid surfaces and DNA organic molecules, formation of fine structures of atomic surface arrangement, and calculation/ simulation for predicting a reaction theorem of atom and molecule surfaces. In fiscal 1997, research was made on improvement and development of computer simulation environment, and description of an excited state of electrons by Green function. Establishment of a construction method and computation code is under investigation for pseudo- potential dependent on excitation energy. Survey was made on research trends of the atom technology by visiting overseas academic societies and institutions. International Symposium on Atom Technology was also held in Tokyo in Nov. 1997

  13. Development of field welding technology for rails; Tetsudo rail no genchi yoyu yosetsu gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Okumura, M.; Karimine, K.; Uchino, K.; Yurioka, N. [Nippon Steel Corp., Tokyo (Japan)

    1995-02-28

    A new element technology is outlined which is for welding regular rails in the field and making a long rail. A new EAW (Enclosed Arc Welding) has been developed for the purpose of improving vibration and noise due to the local abrasion of the existing EAW and improving the deterioration of resistibility against rolling fatigue breakage and the generation of transverse fissure due to the high temperature liquefaction crack. It has been verified that a highly carbonized metal improves the local abrasion and the generation of crack. Problems were brought up, in the case of welding rails by thermit welding (TW) utilizing the reaction of Al powder and brown iron oxide, such that strength was rather small against the bending fatigue of a joint and that the soundness of internal property of a welded part was likely to fluctuate. A test was carried out concerning the latter problem, and it was revealed that the temperature to pour molten steel dropped, whether the Al compound was insufficient or excessive, possibly causing reaction defects. As a technology to replace EAW and TW techniques, an automatic welding was developed which combinedly used narrow groove electro-slag welding and gas sealed arc welding. Further, as an after-treatment of this technology, a method was developed to remove a weld overlay. 19 refs., 16 figs., 6 tabs.

  14. Leading research on artificial techniques controlling cellular function; Saibo zoshoku seigyo gijutsu no sendo kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Advanced research and its applicability were surveyed to apply the advanced functional cells to industry. The basic target was set to develop, produce, control and utilize the functional cells, such as intelligent materials and self-regulation bioreactors. The regulation factors regarding apotosis, which is a process of cell suicide programmed within the cell itself of multicellular organisms, cell cycle and aging/ageless were investigated. Furthermore, the function of regulatory factors was investigated at the protein level. Injection of factors regulating cellular function and tissue engineering required for the regulation of cell proliferation were investigated. Tissue engineering is considered to be the intracellular regulation by gene transduction and the extracellular regulation by culture methods, such as coculture. Analysis methods for cell proliferation and function of living cells were investigated using the probes recognizing molecular structure. Novel biomaterials, artificial organ systems, cellular therapy and useful materials were investigated for utilizing the regulation techniques of cell proliferation. 425 refs., 85 figs., 9 tabs.

  15. Leading research on next generation metal production technology; Jisedai kinzoku shigen seisan gijutsu no sendo kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The energy saving environment-friendly technology for low- grade difficult-to-process ores was researched focusing attention on the hydro-metallurgical process of non-ferrous metals. This research aims at development of both effective leaching system of metals, and separation/crystallization system recognizing the property difference between metal ions in solution. The leaching system allows the inexpensive molecular level control of electron transfer, mass transfer of metal ions and stabilization of leached metal ions in a solid/liquid interface. The system thus allows selective leaching of metals from various resources such as difficult- to-leach sulfide minerals to prepare concentrated solutions. The separation system can obtain high-purity solutions including each metal ion by advanced separation/concentration technology from the solutions. The crystallization technology (including electrolysis) is developed for preparing target metal materials by molecular level control of nucleation, particle growth, thin film formation and bulky metal formation processes. Overall energy consumption is reduced to 1/3 of that of the pyro-metallurgical method, aiming at zero emission. 15 refs., 14 figs., 11 tabs.

  16. Visualization techniques with the aid of optical Schlieren system; Schlieren kashika gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Higashino, F. [Tokyo Univ. of Agriculture and Technology, Tokyo (Japan). Faculty of Technology

    1999-11-05

    Outlined herein is the Schlieren method as one of the most common methods for visualizing high-speed compressible flows. It follows density gradients, and particularly suitable for strong shock waves. An illuminance image is produced by shielding, with the aid of an optical knife edge, light ray deflected by a density gradient in a medium. It is important to adjust knife edge position with illuminance. A concave mirror is a common choice for lens. The common light sources include halogen lamp and, more recently, pulse laser. For example, a pulse laser is suitable for, e.g., propagating shock wave planes and light-emitting combustion, and mercury lamp and Ar laser for slow flows. Some of the visualizing applications are color photographing with the aid of a color filter or the like, where refracted continuous spectral light, changed by density gradient, is used as changed hue; observation of birefringence-caused interference fringes by placing a polarizer and light sensor on the first and second focuses; and visualization of shock waves in a supersonic nozzle and shear layer distribution. (NEDO)

  17. State of the art and future of robot technology; Robot gijutsu no genjo to shorai

    Energy Technology Data Exchange (ETDEWEB)

    Hashimoto, A. [Kinki University, Osaka (Japan). Faculty of Biology Oriented Science and Technology

    1995-12-31

    This paper outlines mainly the mechanism and control of robots among various robot technologies. Robot is a mechanical equipment satisfying a part or all of three following conditions: (1) three elements equivalent to brain, hand and foot, (2) external sensors for remote detection and contact detection, and (3) internal sensors for balance sense and proprioceptive sense. Motion functions with the degree of freedom equivalent at least to a part of manipulation actions of human arm and hand are required for the robot which is expected to be an intelligent machine substituted for human beings dislike simple repetitive works. This paper also explains some current examples of robot`s joint drive mechanism and motion control system. On control technology, the autonomous attitude control of plasma spray guns using ultrasonic sensor was studied experimentally, and the reliability and accuracy of location and attitude control were confirmed. On medical and welfare robot, the friendly rehabilitation equipment for finger joint troubles was developed on the basis of a multi-joint robot. 4 refs., 17 figs., 2 tabs.

  18. Topics about steel technologies. 2. ; Semi-solidification process. Tekko gijutsu topics. 2. ; Hangyoko kako process

    Energy Technology Data Exchange (ETDEWEB)

    Kawakami, M.

    1993-04-01

    This paper describes features, the current status and examples of studies on the metal semi-solidification process. This process provides fine and uniform grain structures without coarse dendrite, internal defects, and segregation. The process uses a low processing pressure that makes uniform processing easier, and can make new composite materials and alloys with new components because of high viscosity in slurry. The thixomolding that combines a semi-melting process with the semi-solidification process is expected of the early realization of its use because it is easier in controlling metal crystal shapes, processing temperatures, and viscosity during processing than in the rheocasting. Research and development efforts in other countries are addressed to developing cryogenic casting processes for mass-produced steel materials aimed at reducing segregation, and studying a process to supply semi-solidified metal slurries to different manufacturing processes to fabricate difficult-to-process materials and functional materials into a near net shape. Studies include identification of relationship between cooling rates and stirring rates affecting crystal shapes, understanding of formability and transformation behavior of semi-solidified metals, and introduction of viscosity inferring equations. 3 figs., 1 tab.

  19. Evaluation technology of human behavior cognition; Ningen kodo ninchi hyoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For human engineering and improvement of the living environment, the evaluation technology of human behavior cognition was studied. For the future reformation and creation of economic structure, the following are required: establishment of safe and affluent communities, further improvement of the safety and harmonious balance of people, lives and society, and R & D close to people and social needs. Introduction of Product Liability law and a fail-safe concept are examples of such efforts. However, since many accidents are found in the human society, the relation between human errors and human characteristics should be studied in detail. The cognitive science of human behavior is an objective evaluation technology from the viewpoint of human being, object, environment and society. Based on these social and technological background, the feasibility of the evaluation technology is studied, and the future trend and skeleton of this project are clarified. The domestic and foreign trends of technologies concerned are thus surveyed, and the important points, features, skeleton and ripple effect of the technology are summarized. 500 refs., 70 figs., 5 tabs.

  20. Investigation on food sanitation controlling technologies; Shokuhin eisei kanri gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    Doi, Y. [Hokkaido Electric Power Co. Inc., Sapporo (Japan); Nishioka, J.

    2000-03-24

    Investigation has been made on the current status of food sanitation controlling technologies. Eighty percent of food poisoning is caused by bacte such as Salmonera, enteritis vibrio, staphylococcus, and pathogenic colibacillus. Putrefaction as the cause for food poisoning occurs from proliferation of different microorganisms. Heating sterilization is the main method being performed, but non-heating method may include sterilization by flash and high voltage pulse discharge in addition to ultra-high pressure and ultraviolet ray sterilization. As a result of the questionnaire survey, what is extracted as the problems in the food sanitation controlling technologies is to establish a rinsing and sterilizing method with large sterilization effect, an effective sterilizing method and thawing of processed marine products, and a cooling method in food processing. Increasingly demanded for the future is to develop a foodstuff sanitation control system using as the core the hazard analysis critical control point (HACCP, a quality control program developed by the U.S. NASA to ensure safety in manufacturing space food), and micro-organism control and sterilizing technologies to support the above system. The flash pulse and high-voltage pulse sterilizing technologies as the non-heating sterilizing technology are more effective than the conventional heating sterilization methods also from the aspect of quality retention after sterilization. More active development thereof is desired. (NEDO)

  1. Polymeric foaming in the new century; Atarashii jidai no happo seikei gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Oshima, M. [Kyoto Univ., Kyoto (Japan). Dept. of Chemical Engineering

    2000-10-20

    Industrial polymeric foams were developed near the middle of the twentieth century. A chemical blowing agent or a physical blowing agent was used to liberate a gas for expanding polymers by foams. Before the 1980, CFC was used because of its high solubility, volatility and nontoxic nature. However, its stability and reactivity with ozone raised substantial concern about ozone depletion. Since the late 1980s, responding the Montreal Protocol, polymeric foam producers started researches and made big efforts to switch CFC to friendly alternative blowing agents. In mid 1980s, the microcellular foaming created by super critical CO{sub 2} was presented in the United State. The central idea of microcellular foams was to create a large number of bubbles, smaller than the pre-existing flaws in a polymer product. Since then, a large number of innovative applications have been imagined and taken people's attentions because of the unique properties of microcellular foams. This article addresses the sate of the art of the foaming and discusses what we could elucidate so far and what we should know in the future to assure more success in foaming technology in the 21 century. (author)

  2. Active noise control and application; Active soon seigyo gijutsu to sono tekiyorei

    Energy Technology Data Exchange (ETDEWEB)

    Muto, M.; Hayashi, M.; Kawai, T.; Sato, F.; Kanbe, K. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan); Inoue, Y.; Takada, K.

    1995-11-01

    The recent rapid progress of electronic devices and signal processing techniques has allowed the practical application of active noise control(ANC) for reduction of noise. The principle of ANC is to cancel a noise by an anti-noise which has the same amplitude of the noise but the inverse phase. For noise reduction in gas ducts, the one dimensional ANC theory can be applied. However, there are still several technical issues particulars to individual plants to be studied and solved. This paper describes the ANC system using the hydraulically actuated speaker which has been developed at IHI, and applications to reduction of low frequency sound emitted at the exit of a stack from a large induction fan. Another application for tractor cabin is also described, indicating successful noise reduction. 6 refs., 12 figs.

  3. Development of active control technique for engine noise. Engine soon no active seigyo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Uchida, H.; Nakao, N.; Butsuen, T. (Mazda Motor Corp., Hiroshima (Japan))

    1994-03-31

    As a measure to reduce engine noise in a car, the active noise control (ANC) technique to eliminate noise by another noise of antiphase has been studied. The conventional filtered-x LMS control algorithm has been generally applied to the ANC, but a large quantity of arithmetic operation used for filtering is practically problematic. This paper proposes the new algorithm of which control effects and practicability have been improved by utilizing periodicity of engine noise and by introducing the idea of error scanning. This algorithm requires only 30-50% of the arithmetic operation of the above LMS method. Concerning the actual system structure, arrangement and the number of microphones have been examined based on the detailed measurement results of the spatial distribution of noise in a car. As a result, the suitable arrangement of only three microphones to reduce noise in the whole interior space of a car is found. Through the experiments, maximum noise reduction of 8dB (A scale) has been achieved at each seat position. 7 refs., 9 figs., 1 tab.

  4. Fiscal 1997 report on the R and D result of industrial science and technology. R and D on super metal (R and D on innovative raw metal materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku seika hokokusho. Super metal no gijutsu kaihatsu (kakushinteki kinzoku sokei zairyo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Study was made on the applicability of mechanical milling (MM) and mechanical alloying (MA) to Fe system alloys. Metastable austenitic stainless steels such as SUS316L and SUS304L form {alpha} phases by strain induced transformation due to MM, and are subjected to further plastic deformation. Nano-size fine structure was obtained through inverse transformation into austenite({gamma}) by heat treatment or high-temperature sintering of MM powder. Fine microduplex structure of 620nm in average crystal grain size was obtained for SUS316L. This material showed nearly 3.3 times higher 0.2% tensile proof stress, nearly 1.8 times higher tensile strength, and 35% higher elongation than conventional ingot steels. Solid solution powder of 12Cr-Mo-W ferritic steel was sintered by hot isostatic pressing (HIP) under low- temperature and ultrahigh-pressure conditions of 650degC and 588MPa. The as-HIP`ed sample and sample annealed at 800degC showed average {alpha} grain sizes of 33 and 50nm, respectively, and a strength twice as high as that of 12Cr steel. 97 refs., 60 figs., 18 tabs.

  5. Leading research on cell proliferation regulation technology; Saibo zoshoku seigyo gijutsu no sendo kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For developing intelligent material, animal test alternative model, bio-cell analysis equipment, self-controlling bio-reactor and medical material, development of functional cells was studied by cell proliferation regulation technology. In fiscal 1996, the expression analysis and separation technology of specific gene for cell proliferation, and the intracellular regulation technology were surveyed from the viewpoint of intracellular regulation. The cell proliferation regulation technology by specific regulating material of cells, extracellular matrix, coculture system and embryonic cell was surveyed from the viewpoint of extracellular regulation. In addition, based on these survey results, new cell culture/analysis technology, new bio-material, artificial organ system, energy saving bio-reactor, environment purification microorganism, and animal test alternative model were surveyed as applications to industrial basic technologies from a long-term viewpoint. The approach to cell proliferation regulation requires preparation of a concrete proliferation regulation technology system of cells, and concrete application targets. 268 refs., 43 figs., 4 tabs.

  6. Comprehensive research cooperation in environmental technology in fiscal 1995; 1995 nendo kankyo gijutsu sogo kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Cooperative study was conducted on research subjects concerning water pollution preventive technologies in China and Thailand. In China, straw pulp mills were studied which were in the Institute of Light Industry Environmental Protection and the Environmental Engineering Course of Jinghua University. The following studies were jointly conducted: survey of the water quality pollution caused by waste water, investigational study on production technology and waste water treatment technology, extraction of technologies effective to preserve water quality, study/evaluation of economical efficiency of the said technologies, etc. In Thailand, cooperative research was conducted on automatic measuring technology for factory waste water in a model industrial estate of the Thai National Industrial Estate Corporation. Items for the study were a study on measuring technology for water quality environment, an investigation on the status of water quality environment in the model industrial estate, a study on automatic measuring technology for plant waste water, a study on how to use measuring data in the model industrial estate, etc. Every study enabled technical data accumulation at every research institute through field research exchanges. 24 refs., 91 figs., 45 tabs.

  7. Application of supercritical fluid to separation techniques; Chorinkai ryutai no bunri gijutsu eno oyo

    Energy Technology Data Exchange (ETDEWEB)

    Minamino, Y.; Aki, T. [Mitsubishi Kakoki Kaisha Ltd., Tokyo (Japan)

    1994-09-05

    The application of supercritical fluid on separation techniques and its problems are reviewed. The application is at a standstill contrary to large expectation for it except component extraction from natural foods such as caffeine removal from coffee. Various problems are thus pointed out to be solved as follows; a study on new applications other than substitutional use for organic solvents, cost reduction, a study on new safe advanced fluids suitable for specific objects other than CO2, and combination with other several separation techniques. The new practical applications of supercritical fluid expected in the near future are as follows; low-cost mass production of antibodies by use of the immunity system of hens, drying of porous bodies intercalated in aqueous solution, removal of residual unreacted monomers and organic solvents from medical polymers, development of supercritical chromatographic equipment possible to separate pure functional food materials, and analytical extraction of functional groups including hetero atoms from harmful substances. 6 refs., 2 figs., 2 tabs.

  8. Technical and other experience at Embalut coal mine; Embalut tanko deno gijutsu kaizen

    Energy Technology Data Exchange (ETDEWEB)

    Kakizaki, A. [Mitsui Mining Co. Ltd., Tokyo (Japan)

    1997-10-25

    This paper describes technology development at Embalut Coal Mine in Indonesia. This coal mine opened in 1983. There is an anticlinal axis in the east and a synclinal axis at the west end. The coal seam inclines towards west. Coal seams in Miocene Epoch, Tertiary Period compose of 23 seams from lower No. 1 Seam to upper No. 23 Seam. Calorific values are between 6700 and 5800 kcal/kg, and sulfur contents are between 0.2 and 2%. At initial stages, logs with diameter between 10 and 15 cm were used as supports, and coal seams were dug by picks (air hoses). Coals were flown by themselves through vinyl trough, and were loaded in coal tubs in the lower gallery. They were carried by hand pushing to the lifting slope. Driving could not be progressed due to the frequent roof fall within 10 m, which resulted in the very low recovery. Steel props were employed at five faces and air supply to picks was increased, to enhance the production. The production was further enhanced using blasting. Coal tubs using 22 kW motors were introduced in stead of hand-pushing transportation. Since spontaneous firing often happened due to random mining and incomplete closing, upcast shaft with a depth 30 m and an internal diameter 3 m was excavated in the rock gallery. 3 figs., 1 tab.

  9. Measuring techniques for martensitic transformations; Marutensaito hentai ni kansuru sokutei gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, Y.; Morito, S. [Univ. of Tsukuba, Tsukuba (Japan). Graduate School; Otsuka, K. [Univ. of Tsukuba, Ibaraki (Japan). Inst. of Materials Science

    1996-03-20

    It is better to measure physical amount that shows significant change during transformation in order to carry out precise detection of martensitic transformations or to decide the transformation temperature. One of it is Differential scanning calorimetry (DSC) method. This method is very easy along with the determination of transformation enthalpy and also specific heat and is used widely. In martensitic transformation, there exist the intrinsic crystal habit face to the alloy system and crystal azimuthal relation between parent phase and martensite, and it is important to decide them correctly as crystallographic parameters. Overhere, method for measuring crystallographic parameters from martensite caused in parent phase single crystal material is introduced. Further, role of electron microscope is extremely large regarding the revelation of martensitic transformation mechanism in atomic scale. In this report, as for what is revealed regarding martensitic transformation when using electron microscope, crystal structure of martensite, form, structure of the interface and so forth are cited. 39 refs., 5 figs.

  10. Science and technology on ceramics and cerments materials; Ceramics oyobi cermet zairyo no kagaku to gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Iwamato, N. [Osaka Univ. (Japan)

    1998-03-31

    Applications of ceramics coat and cerment coat are being rapidly improved with the development of VSOP. But, while forming a spraying coat, there are many working factors such as powder ingredients, coat forming conditions, compatibility of the spraying coat with the substrate, and individually particular problems concerning properties, hollowness microstructure and sticking strength to the substrate of the spraying coat have to be solved. In this paper, the history of development of cerment and bulk materials and the problems thereof are described. Influences on shapes and mechanical properties of compound particles, wettability of compound with the spraying metal, and generation of {eta}(Co6W6C) in the WC-Co alloy are pointed out as the problems. Then, the application field of the cerment and bulk materials is introduced. At last, as the recent development of cerment coat engineering, WC coat, WC-Co coat, diamond coat and TiC coat by using the CVD or PVD process are described. 34 refs.,4 figs., 2 tabs.

  11. Robotics in port construction. Kowan kensetsu ni okeru roboto ka gijutsu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Sakai, Hiroshi (Ministry of Transport, Tokyo (Japan))

    1990-02-15

    To cope positively with the problems of securing labor, improving work environment, etc., mechanization and robotics in port and marine development are the urgent subjects. Technologies for robotics of various levels are being developed, coverning data acquisition, processing, display, recording simple automation, and high inteligent fuction which can automatically make such judgement as having been done by man. Some representative cases of technological development in the fields of robotics and mechnization being carried on by the Ports and Harbors Bureau in the Ministry of Transportaion are introduced. Technological develpment required for the mechanization of rubble mound foundation construction work has been carried on. A demonstration test was carried out at Kamaishi Port, proving the practicability of the technology. Robots are developed which can walk on the sea bottom to perform underwater investigation and unmanned operation. Underwater visual device and underwater position measurement device are provided as the supporing systems. Several tests were already performed in actual sea areas and the success of the development was verified. 3 figs.

  12. Coal technologies of Japan in 1988 and 1989. 1988, 1989 nen no sekitan gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-25

    The 8th coal policy of Japan which has been in effect since 1987 has passed its half way and during the above period, coal mines such as Mitsubishi Takashima, Mitsui Sunagawa, Hokutan Horonai and Mitsubishi Minami-Ohyubari, etc. were closed and further concentration and rationalization of the production systems has been continued. Total coal production in FY 1988 as well as FY 1989 was 11.1 million tons and 9.7 million tons respectively, and concerning the development surveys of coal resources, maritime geophysical explorations and test drillings were done in Ariake Sea and off Kushiro, etc. and land geophysical explorations and test drillings at Asajino, etc.. International interchange concerning coal technologies was also very active and the amount of imported coal of various kinds exceeded that of the preceding fiscal year in both fiscal years, irrespective of the unconsumed year-end surplus coal storage in the domestic coal production. As shown above, domestic coal is inferior to overseas coal pricewise, hence domestic coal mines are pushing concentration of faces and introduction of larger coal mining machines. With regard to coal mine safety, the research and development of technologies of prediction and safety against gas issue, spontaneous combustion and mine fire, etc. is under way and coal processing technologies as well as coal utilization technologies such as fluidized bed incineration, etc. are now being developed. 3 figs., 12 tabs.

  13. CMOS analog integrated circuit design technology; CMOS anarogu IC sekkei gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Fujimoto, H.; Fujisawa, A. [Fuji Electric Co. Ltd., Tokyo (Japan)

    2000-08-10

    In the field of the LSI (large scale integrated circuit) in rapid progress toward high integration and advanced functions, CAD (computer-aided design) technology has become indispensable to LSI development within a short period. Fuji Electric has developed design technologies and automatic design system to develop high-quality analog ICs (integrated circuits), including power supply ICs. within a short period. This paper describes CMOS (complementary metal-oxide semiconductor) analog macro cell, circuit simulation, automatic routing, and backannotation technologies. (author)

  14. Manufacturing technology for advanced jet engines; Jisedai jetto engine no seizo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Hirakawa, H. [Kawasaki Heavy Industries Ltd., Kobe (Japan)

    1997-04-05

    A part of the latest production technologies for aircraft jet engines is introduced. Outline of the turbofan engine, turbo-prop engine, and turbo-shaft engine are given. Every one of them employs a gas turbine engine comprising a compressor, combustor, and a turbine as the output generator. Increase in the turbine inlet temperature is effective for making the gas turbine engine more efficient. The development tread of heat resisting materials for realizing higher temperature is shown. The current status and future aspect of the manufacturing technology is discussed for each main component of the engine. Technological development for decreasing weight is important because the weight of the fan member increases when the fan diameter is increased to increase the bypass ratio. FRP is adopted for the blades and casing to decrease the weight of the compressor, and studies have been made on fiber reinforced materials to reduce the weight of the disks. The outlines of the latest manufacturing technologies for the combustor and turbine are introduced. 2 refs., 9 figs.

  15. Optical technology applied to jet engine; Jet engine seigyo eno hikari gijutsu no tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Nakajima, T.; Ebina, K.; Endo, M. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

    1997-09-01

    Pyrometer that can be mounted on an aircraft engine is developed for measuring engine turbine blade temperatures. Energy radiated from the blade surface is collected by a lens and then forwarded to a photoelectric conversion photodiode through a heat-resistant optical fiber. A cleaning/purging mechanism is provided in case the lens collects dirt that will attenuate the signal for the indication of a temperature that is lower than the true temperature (in a cold shift phenomenon). The pyrometer is tested on an engine, when a measurement accuracy of {+-}10degC is attained without cold shift taking place. It responds to changes more swiftly than conventional types, which justifies its application to the control of engines. Since it works effectively to connect a bunch of optical fibers, rather than conventional electric wires, to the printed circuit board for guiding optical signals to a printed circuit board in a digital control unit, an optical backplane structure is developed. This structure is designed to be an optical waveguide type which can incorporate into itself some mechanisms of synthesizer, optical waveguide coupler, and light filter, in case of need for handling multiple transmission. The pyrometer is tested on an aircraft engine in operation at high and low temperatures, and demonstrates satisfying light-receiving and light-emitting properties. 4 refs., 10 figs.

  16. Thermal storage and transport technology using PCM; PCM chikunetsu netsuyuso gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Yamanishi, A.; Nakamuima, M.; Kakihara, T.; Konishi, S. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

    2000-05-01

    The fluid type PCM (Phase Change Material) for thermal storage and transport systems has the advantage of saving energy for many kinds of energy systems. Emulsion type PCMs based on n-paraffins with melting points of 5 degree C and 60 degree C have been developed, which will be applied to air-cooling systems and waste energy recycling systems. Based on investigations of methods to cancel supercooling state and selection of the surfactant, PCMs resistant to damage from the heating-cooling thermal cycles have been developed. Calculations show that the power requirements of the PCM thermal transportation system are much less than those of the water system. (author)

  17. International Symposium for the Promotion of APEC Environmental Technology Exchange; APEC kankyo gijutsu koryu sokushin symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-11

    The International Symposium for the Promotion of APEC Environmental Technology Exchange was held under the theme `The function and role expected of the APEC Virtual Center,` with the objectives of clarifying the need for future intra-regional environmental technological exchange, defining the types of information and personnel exchange, and promoting the use of interactive character of the APEC Virtual Center for Environmental Technology Exchange by encouraging access to and participation in the Virtual Center project. It was held in the period of 11th and 12th, November in 1996, at the venue of Rinku International Convention Center in Osaka. The symposium was attended by 477 persons from nine countries, i.e., Australia, Canada, China, Indonesia, Korea, Philippines, Thailand, the US, and Japan, comprising staff members of intra-regional environment-related organizations. After the keynote speech, `Current status and tasks of environmental technology exchange`, and `Expected roles of the Virtual Center for Environmental Technology Exchange` were discussed. During the plenary session, the chairman summarized the symposium. This summary was carried on the Virtual Center homepage of the Internet

  18. Research report of FY 1997 on the industrial science and technology development. Technology development of super-metal (technology development of nano-amorphous structural control materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku seika hokokusho. Super metal no gijutsu kaihatsu (nano-amorphous kozo seigyo zairyo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Research and development of the innovative metals have been conducted, by which the weight reduction of members can be done by drastically improving the strength compared with conventional metals. For the high-rate cluster deposition and super plastic forming technologies, research and development of aluminum-based light-weight materials have been conducted, which provides excellent strength, toughness, and super plastic formability at room temperature. For the high-density energy utilization and control technology (amorphous-A), super-metals have been investigated as high dew point and corrosion resistance materials used for waste incinerators operated under the very severe conditions. These are expected to be applied to the apparatuses and equipment due to their excellent properties. For the controlled cooling technology (amorphous-B), super-metals with excellent soft magnetic characteristics and degree of shape freedom have been investigated for high performance and high efficiency devices including electric/electronic/communication devices, power transmission devices, and various industrial devices and parts. These are expected to contribute to the creation of new markets and the improvement of international competitive force. 123 refs., 160 figs., 33 tabs.

  19. Vibration control of tower of long span suspension bridge; Chodai tsuribashi shuto no seishin gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Kubota, H.; Miyazaki, M. [Sumitomo Heavy Industries, Ltd., Tokyo (Japan); Sasaki, M. [Bridge and Offshore Engineering Association, Tokyo (Japan); Fumoto, K. [Honshu-Shikoku Bridge Authority, Tokyo (Japan)

    1998-08-20

    This paper describes the vibration control during the erection of 8P main tower of Kurushima-ohashi Bridge. Since the body of tower crane and the crane post were adjacent to the main tower, stability against wind due to the change of separation flow was worried. Response characteristics and design data for the damper were obtained through the wind tunnel tests. Since the vibration characteristics change in each erection step, generation of vortex excitation was examined in various modes. An active mass damper (AMD) was applied to the tower surface radial bending primary vibration, of which natural frequency changes in a wide range at the wind velocity below working limit, and the other vibration modes. A tuned mass damper (TMD) was also used in the mode where large damping energy is required under the high wind velocity and high frequency conditions. For the rolling pendulum type AMD, a servo-motor driving carriage moves on the frame rail, and a restitutive force is obtained with rotating the fan type rolling element pin-supported on the carriage. The natural frequency of AMD can be adjusted by fan shaped plural weight plates. Variable gain type DVFB control was employed, in which displacement and velocity of the damper are used as the control output. Sufficient functions could be obtained. 7 refs., 4 figs., 5 tabs.

  20. Survey on the information network for environmental technology transfer; Kankyo gijutsu iten joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In order to promote the interchange of environmental technologies mainly with developing countries (APEC countries), the concrete survey on construction of the information network for technology transfer was carried out. The useful information about environmental technologies for developing countries are not the latest Japanese information but actual field information in practical use which have been developed on the basis of constant improvements. Developing countries want clean technologies with less environmental burden, and difficult-to-obtain information for small and medium-sized businesses. Data were thus collected mainly in the Chubu district, and the information system was composed of an Internet server and in-house LAN. The system featured by easy retrieval and maintenance of the database was adopted. In addition, Internet connection environment and information needs in developing countries were surveyed. Expansion of the database and information supply, and constant addition of fresh information by continuous maintenance are essential in the future. 6 figs.

  1. Evaluation technology of lead-free solders; Namari free handa zairyo ni okeru hyoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, M.; Shiokawa, K. [Fuji Electric Co. Ltd., Tokyo (Japan); Ueda, A. [Fuji Electric Corporate Research and Development,Ltd., Kanagawa (Japan)

    2000-09-10

    Solders mainly composed of tin and lead are currently in widespread use in semiconductor devices. However, in view of lead influences on the human body and environmental problems, lead-free solders have been in urgent demand. In this study, aiming to improve the solderability and reliability of a tin-silver solder, one of most promising lead-free solder materials, we have investigated elements to be added. Focusing on typical lead-free tin-silver solders and tin-lead eutectic solders, this paper describes the result of investigations into the mechanical properties solderability, micro structures of the solder materials and gas analysis in soldering. (author)

  2. Lectures on ceramics experimenting technologies. Crushing; Ceramics jikken gijutsu koza. Funsai

    Energy Technology Data Exchange (ETDEWEB)

    Masaki, H. [Toyota Central Research and Development Labs., Inc., Aichi (Japan)

    1997-04-01

    This paper explains a laboratory process for ceramics crushing. Crushing is performed to obtain powder particles having desired size, shape and grain size distribution for the purpose of improving their formability and sinterability. Crushing devices and methods may vary according to these requirements. A ball mill is suitable for obtaining wide grain size distribution, and a vibration mill and a media stirring mill for obtaining narrow grain size distribution. However, an easily cleanable and inexpensive device suits better in a study stage because what is require for a study is mainly property experiments. Calcinated BaTiO3, for example, is first crushed to several mm or smaller with the dry method by using a mortar and a pestle. Then, it is pulverized to sub-microns with the wet method by using a ball mill, a vibration mill or a media stirring mill. Particle size and its distribution may be measured to evaluate particles before and after the crushing. A sieve can classify particles relatively easily if their size is 50 {mu} m or larger. A particle size distribution measuring device can measure sizes ranging from sub-microns to several hundred {mu}m continuously in a short time. Specific surface area is measured generally by using the nitrogen gas adsorption BET method. 8 refs., 4 figs., 3 tabs.

  3. Automotive technology. ; Production engineering and production system. Jidosha gijutsu. ; Seisan gijutsuter dot system

    Energy Technology Data Exchange (ETDEWEB)

    Miki, T. (Daihatsu Motor Co. Ltd., Osaka (Japan))

    1990-07-01

    Japanese automotive industry grew stably through the year of 1989, sustained by favorable domestic demands, and recorded the historically highest production of 13.03 million cars (2.6% up compared with the previous year). Also, newly-designed cars appeared on the market successively, aiming at improving the marketability of automobiles. In the aspect of production engineering, in order to meet the users' needs and preferences, the use of aluminum and plastic materials for car bodies and the application of engineering plastics to such functional parts as intake manifolds and springs have advanced, and the technology of precision mechanical work, forging, sintering and the like for high strength materials has also progressed. Moreover, the application of surface treated steel sheets and plastics for preventing rust as well as plastic painting matching with car designs has increased. In respect of production lines, as the variety of car types has increased corresponding to the diversified users' preferences, utilization of the flexible manufacturing system, which can readily change the types of cars on the production line, has spread extensively so as to improve the efficiency of mixed production lines. Also being pursued is computer-integrated manufacturing (CIM) as a production marketing integrated system to reduce the lead time for production. 26 refs.

  4. Engineering aspects requied for pianos as musical instruments; Gakki toshite no piano gijutsu no arikata

    Energy Technology Data Exchange (ETDEWEB)

    Nozaki, K.; Hayashida, H. [Yamaha Corp., Shizuoka (Japan)

    1996-01-05

    The authors (two persons) of this article are engineers participating in design and manufacture of pianos at Yamaha Co.. They consider that regarding techniques of making musical instruments, there are the techniques peculiar to its respective domains, and there is a good sense for the ideal of such a technique, hence from this viewpoint, they describe in this article their concept on mechanization and automatization in the field of pianos. Concerning musical instruments including pianos, it is the prerequisite that these instruments are to be modulated so that the intentions of its players may well be expressed, hence in case of a concert, the tuning which meets the demand of its player is to be made on the spot by a piano tuner. The piano contains complexity of having the aspects of stringed instrument, keyboard instrument and percussion, and regarding its quality, the initial quality as well as time-lapsed quality are required for sound, touch and appearance. As for manufacturing pianos, there are 4 processes of material selection, structural design, manufacture and modulation. For material, natural material is used often. Regarding modulation of pianos, there are three works, namely modulating, tuning and voicing. At this point of time, the final stage of manufacture is adjustment by the human being, but automatization is considered in the preparatory stages (assembly, etc.). 3 refs.

  5. Study of the O2/CO2 combustion technology; Sanso nensho gijutsu ni kakawaru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Kato, M. [Center for Coal Utilization, Japan, Tokyo (Japan); Kiga, T.; Yamada, T. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan); Arai, K. [Nippon Sanso K.K., Tokyo (Japan); Mori, T. [Inst. of Research and Innovation, Tokyo (Japan); Kimura, N.; Okawa, M. [Electric Power Development Co. Ltd., Tokyo (Japan)

    1996-09-01

    This study is being progressed during a period from 1992 to 1999 as part of the NEDO`s clean coal technology program. This paper describes what has been discussed to date. The absorption method and the adsorption method may be used to recover CO2 as means to deal with the problem of global warming resulted from burning coals. These methods, however, have problems in economy caused from concentration of CO2 in flue gas being low. The present study is intended to raise the CO2 concentration in flue gas by using oxygen plus circulated flue gas in the place of combustion air, so that CO2 may be recovered as it is without being separated from the flue gas. Therefore, an oxygen-blown pulverized coal fired power generation plant having a cryogenic oxygen manufacturing equipment was designed to discuss the plant operability and economy, and the pulverized coal combustion technology by using a dynamic simulation. A large number of findings have been obtained already, and the study has reached a level at which grasping the whole image is now possible. 13 figs.

  6. Development of pressurized coal partial combustor; Kaatsu sekitan bubun nenshoro gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, T. [Center for Coal Utilization, Japan, Tokyo (Japan); Kawamura, K. [Kawasaki Heavy Industries, Ltd., Kobe (Japan); Tanaka, T. [Chubu Electric Power Co. Inc., Nagoya (Japan); Muramatsu, T. [Electric Power Development Co. Ltd., Tokyo (Japan)

    1996-09-01

    The coal partial combustor (CPC) uses a combustion technology with which coal is burned at elevated temperatures and under revolution, the constituents are captured on the furnace wall and removed as molten slag from the furnace. This is a combustion technology to reduce load of ash on subsequent devices. To generate a molten condition, it is necessary to raise the combustion temperature as high as possible (to about 1600 degC in the furnace), but this is effective for a gas turbine composite power generation system. An efficiency of higher than 45% may be expected at the power transmission terminal. As an operation on subsidy from the Agency of Natural Resources and Energy, the normal-pressure CPC technology has already been established, and a research on pressurized CPC is being progressed since fiscal 1991. The research is in progress with a schedule that elemental tests for 7 tons per day production are conducted until fiscal 1995, a 25 tons per day pilot plant will be completed by November 1997, and verification tests for long-term continuous operation will be implemented until 1998. The 7 tons per day elemental tests have identified gasification performance and slag extraction performance using five types of coal having different properties. 7 refs., 10 figs., 4 tabs.

  7. Development of advanced coal cleaning process; Kodo sekitan kaishitsu gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Osaka, S. [Center for Coal Utilization, Japan, Tokyo (Japan); Akimoto, A.; Yamashita, T. [Idemitsu Kosan Co. Ltd., Tokyo (Japan)

    1996-09-01

    This paper aims to develop a clean coal production process which excellently removes environmental pollutant, is low-costed, and need no particular systems for distribution of products. The result of the development was described paying attention to column flotation which is a technology to high-efficiently select particulate regions, particulate heavy media cyclone, magnetic separation, and the basic design of the process into which those above were integrated. The two-stage selection process, which is an integration of column flotation and particulate heavy media cyclone into the conventional coal preparation equipment, can produce low-ash clean coal at high separation efficiency and also suppress the rise in processing cost. This process was also effective for removal of sulfur content and trace metal elements. The use of clean coal at power plant can be effective for not only the reduction in ash treatment amount, but the aspect of boiler operation characteristics such as heat transfer efficiency of boiler furnace wall, ash related troubles, loads of electrostatic precipitator, loads of flue gas desulfurization facilities. 17 figs., 5 tabs.

  8. Industrialization of technology of continuous liquid phase separation. Renzoku ekiso bunri gijutsu no kogyoka

    Energy Technology Data Exchange (ETDEWEB)

    Nakaishi, H. (JGC Corp., Tokyo (Japan))

    1994-01-05

    As one example of process technology industrialized in 1960s, a continuous process by liquid phase adsorption is introduced, that was developed by an American enterprise for petroleum refining. The background of development is described in details and elements for its success are explained as well as the impact. The motive for development was to separate n-paraffin from oil with molecular sieves in order to raise octane values of gasoline. However, the scene realized in industrialization was in the separation of n-paraffin from kerosene to get raw materials for synthetic detergents. Although literature on gas phase adsorption was well documented at that time, liquid adsorption that was an untrodden field was decided to be explored in consideration of problems involved in high temperature required for gas phase sdsorption. Taking theoretical validity of a moving bed system into consideration, a pseudo-moving bed system, wherein adsorption beds are still and the take-in/-out position of liquid moves with time lapse, was developed for the sake of limited mechanical strength of adsorbent (zeolite)and biased flow caused by moving layers. Use of mathematical models as probes for phenomena of chemical engineering and for analysis of process performance by computers contributed greatly to the success. 3 refs., 1 fig.

  9. Controlled release/removal technology; Seigyo hoshutsu {center_dot} jokyo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Tojo, K. [Kyushu Inst. of Tech., Fukuoka (Japan)

    2000-02-05

    The controlled release is to control optimally releasing velocity of active ingredient in medication or agricultural chemicals for therapy or vermin control. The novel transdermal therapeutic system can be developed considering diapause term of medication setting type or time pharmacology by storing information of time lag for medication permeability in medication keeping layer. Furthermore by resent iontophoresis technology using electric fields for controlling drug permeability through the skin, migration volume of active ingredient to blood can be controlled pulsed shape by On- Off of electric fields. In another hand, it comes to be clarified that drugs in the body can be extracted by contrarotating operation of electrodes. From now, effective removal system of barren materials from organism or time controlling therapeutic system with feed buck function can be realized by being optimal novel technology of medical engineering therapy. (NEDO)

  10. Progress in magnetic measurements. Jiki keisoku gijutsu no saikin no ugoki

    Energy Technology Data Exchange (ETDEWEB)

    Shirae, K. (Osaka Univ., Osaka (Japan). Faculty of Engineering and Science)

    1992-09-10

    Although the measurement of magnetic field in the space such as the earth magnetism is firstly pointed out as a measurement of magnetism, in addition to it, the measurement of the property of magnetic substance and the magnetic domain is included in this range. The broadening of magnetic field extends currently from 1fT to over 1MT. The magnetic field more than MT is the one which is said to exist in the blackhole in the end of the cosmos. The magnitude of artificial magnetic field does not reach KT. The superconductive quantum interference device (SQUID) magnetometer is currently a detector for the magnetic field with a highest sensitivity. The property of magnetic material is basically represented by the measurement of magnetization curve, measurement of less and measurement of magnetic permeability. The inside of magnetic substance is subdivided into the magnetic domain. Also the electron microscope demonstrates the powerful influence for the observation of magnetic domain. The measurement of magnetism has also a purpose to wish to find a source generating the magnetism. It is, so-called, one of the inverse problems which presume the cause from the result. That the magnetic domain structure in the inside of magnetic substance is restructed from the measurement of the leakage magnetic field in the magnetic substance and so forth, correspond to this. 10 refs., 6 figs.

  11. Submarine afforestration technique based on copying nature; Shizen moho no kaichu ryokuka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Kawasaki, Y.; Hasegawa, H. [Central Research Institute of Electric Power Industry, Tokyo (Japan); Terawaki, T.

    1994-09-15

    This paper introduces a technique, submarine afforestation technique based on copying nature, to prepare reeves in the sandy area so that communities for eisenia or other aquatic organisms can be formed. This technique provides artificial basements in the sandy area with instable farming condition. Lightweight and wave-resistant linkage blocks are used for the farming basement, and each block is provided protrusions that are effective for marine algae farming. The possible farming place can be selected using the information regarding sea bed landform, geological feature distribution of sea bed, marine algae distribution investigated by side scan sonars and sonic survey machine. The appearance range of eisenia fry was surveyed and, as a result, the area within 100 m from the reef area were identified as suitable farming area. Four tons were selected as a weight of basement material based on the experiment of wave power, cost and other parameters. At least 120 cm were determined as a height considering the growing condition of eisenia or other aquatic organisms and sand surface fluctuation width. Sixteen pieces a square meter were selected as an attachment density of protrusions with reference to growing density. The basement was examined 2 years after installation. Communities of eisenia were found on the basements installed underwater 4 m in depth, and communities of ecklonia were found on the basements installed underwater 11 m in depth. Protrusions were also proved to be effective. 8 figs.

  12. Investigational report on the trend of control technology; Seigyo gijutsu doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    For the purpose of corresponding to changes of the industrial structure and making full use of the control technology, the paper investigated the state of the application. High-grade automation in the manufacturing industry has reached the spread of use at big companies for these 10 years. The hierarchical structure of business/process/DCS has been completed, and the optimal control and the advanced control have been realized. The development and spread to the much wider field is anticipated. The soft structure system is needed for equipment improvement in view of the life cycle of equipment and toward the elimination of bottlenecking. For the design of the control system, commercial tools began to be much used, and it is expected in future to accumulate and recycle the knowledge/knowhow for effective design work. Further, strict simulation models based material balance and heat balance have also been on the rise, and the advance in technology is expected. Because of the total productivity of the production equipment, the control technology is anticipated not only for the pursuit of controllability but for the use as supporting technology in the operation/driving/failure diagnosis for working out, carrying out and evaluating the optimum operation plan. 18 refs., 99 figs., 100 tabs.

  13. Demonstration technology development of new hydrogen energy; Shinsuiso energy jissho gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This report describes results of the study on the excess heat generation phenomenon during the electrolysis of heavy water using palladium metals as electrode in FY 1995. For the measurements of excess heat using an open type electrolysis cell during the excess heat generation demonstration model tests, significant excess heat beyond the range of input was not measured both for ICARUS-1 and for ICARUS-2. For the measurements using a fuel cell, high absorbing rate more than 0.85 was stably achieved for highly pure Pd electrode material by heat treatment and surface treatment. The excess heat could be reproduced for plural tests. The heat recovery rate more than 98% was obtained using the NHE type flow calorimetric system. The excess heat measurements using this are examined. For the reactive palladium materials, various materials ranging from single crystal to cold working polycrystal materials were systematically used for the absorbing experiments. Benchmark tests were also conducted through the cooperation with related researchers. 18 refs., 135 figs., 28 tabs.

  14. Survey on the succession situation of technologies; Gijutsu keisho jokyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    The basic survey was carried out to promote the succession and creative use of the previous industrial science and technology. The following 5 themes were summarized in fiscal 1993. On `Fuel technology policy and technological development,` Navy Fuel Depot, Chemical Research Institute at University of Kyoto, Central Laboratory of South Manchuria Railway Co., and Fuel Research Laboratory of the Ministry of Agriculture and Commerce played important roles, and the 1000atm continuous hydrogenation system was completed in 1941. On `Technology of long-distance power transmission,` high-voltage insulation technology finally reached an international level after World War II. On `Unification of frequency and electrical technology,` the two-frequency system for eastern and western areas was established before World War II, and construction of Sakuma Frequency Conversion Station allowed power interchange between two areas. On `Organization of national research laboratories,` the Agency of Industrial Science and Technology distinguished the roles of new and existing laboratories. On `Wind power technology in Europe and America,` comparison between American and Danish approaches is the most important issue today. 146 refs., 20 figs., 13 tabs.

  15. Development of Ultra Super Critical Plant; Chocho rinkai (USC) hatsuden no gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Muramatsu, K. [Electric Power Development Co. Ltd., Tokyo (Japan)

    1996-03-25

    Electric Power Development Co. is improving the development of ultra high pressure and high temperature of steam condition, namely Ultra Super Critical (USC) Steam Condition pressure power generation, practicability of which is very high in recent years, by improving the steam conditions of the traditional coal thermal power generation. As the harmonization of boiler and turbine is necessary for developing the USC, the tests concerning boiler elements and various tests of turbine are conducted at the same time. As for the USC technique development, a feasibility study was carried out in 1980, then Phase-1 was developed by 1993 and the development of Phase-2 started in 1994. Phase-1 uses ferritic material or austenitic material and the targets of their steam temperature are 593{degree}C and 649{degree}C respectively. Phase-2 uses ferritic material as more as possibly and research and development on two steps of reheating and regenerating cycle steam, conditions of which are 30MPa for pressure and 630/630{degree}C for steam temperature are being conducted. 16 figs., 7 tabs.

  16. Demonstration technology development of new hydrogen energy; Shinsuiso energy jissho gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This report describes results of the study on the excess heat generation phenomenon during the electrolysis of heavy water using palladium metals as electrode in FY 1994. For the excess heat generation demonstration model tests, an open type electrolysis cell and a fuel cell type electrolysis cell have been used. A flow calorimetric method has been introduced as a more accurate method of heat measurement, and the working confirmation tests were carried out. To examine the factors of material which are considered to affect the exoergic phenomenon, factors of the improvement in absorbing rate were investigated. Surface observation, microstructure observation, X-ray diffraction, AES surface analysis, EPMA analysis, and SIMS analysis were conducted for the electrode materials after electrolysis. As a result, it was considered that the impurities included as cracks, voids and deoxidizer in materials could affect the deuterium absorbing during electrolysis. In addition, construction of database relating to this investigation was planned, and scientific and technological information data were collected. 1 ref., 110 figs., 20 tabs.

  17. Looking for a new scientific technology paradigm; Shinkagaku gijutsu paradaimu wo motomete

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-05

    At the time of spreading abroad of collapse of the bubble economy, hollowing of the manufacturing industry, and arrival of the times of Asia, the editorial department held a round-table talk for a title of `Looking for a new scientific technology paradigm` participated by representatives from industries, governmental organizations, and academic circles. This paper is the record thereof, at which the main subjects of talks included the `change in environment` represented by the internationalization and globalization, the `biotechnologies` as th possibility of a new paradigm, `the way the cooperation should be among the industries, governmental organizations and academic circles`, `attitudes to cope with global environmental problems`, and `messages to young people`. For example, what are important are that room cooling means warming up cities from the structures of the cities on the whole, whereas engineers must have conceptions that stand on a viewpoint for the society on the whole; the issues existing among the industries, governmental offices, and academic circles must be moved forward to realize a system in which the self-consciousness on the domain of one`s own office in the governmental organization is dismissed and free and open discussions and evaluations can be made; and energy saving efforts should advance to a global idea including the peripheral cost and locations.

  18. Denchuken review. Prospecting and visualization technology; Denchuken review. Chika no tansa kashika gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-30

    This paper introduces the prospecting and visualization technology cultivated in Denchuken (Central Research Institute of Electric Power Industry). The fluctuations in underground gas, underground water, gravity, terrestrial magnetism, and terrestrial current are information from the earth. The change in underground structure, underground water movement, and underground properties can be grasped using this information. With the progress of electronic engineering, a geophysical exploration method has been rapidly developed in recent years. This method is the most advanced technology in many ground examination methods. In the Denchuken, the following methods have been put to practical use between the shallow section of several meters under ground and the deep section of several kilometers. An underground radar method, seismic prospecting method, electrical prospecting method, CSAMT method that estimates the position of geothermal sources or faults by electromagnetic waves, TDEM method, and AE method that destroys the rock at the depth of the ground and detects by slight sound. Moreover, a geotomography method that can visualize the ground depth in precision using a bore hole by nondestruction executes the tomography based on specific resistance, elastic waves, electromagnetic waves, and percolation. 127 refs., 94 figs., 4 tabs.

  19. Advanced technology trend survey of micromachines in Europe; Oshu ni okeru micromachine sentan gijutsu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    In this research survey, the development trend of micromachine technology in Europe was surveyed, development level of micromachine technology of European companies was grasped, and practical application fields of their target were investigated. Technology development level of private companies in Japan`s national projects and practical application fields of Japan`s target were arranged. Trends of micromachine technology development are compared between Japanese companies and European companies. Among micromachine technology development projects in Europe, ``8520 MUST`` is a part of the ESPRIT Project. About 40,000 companies among about 170,000 companies in whole Europe are relating to the MUST Project. The main fields include the manufacturing technology, process control of machines, technology of safety, sensor technology in environmental fields, and automotive technology. The marketing fields of application include the automobile, military technology, home automation, industrial process, medical technology, environmental technology, and games. The results can be compared with the direction of research and development in Japan. 22 figs., 8 tabs.

  20. Survey report for fiscal 1998 on the survey and study on basic information needs for development of welfare goods; 1998 nendo fukushi yogu kaihatsu kiban joho needs chosa kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    With an objective to make clear the basic information about aged and handicapped persons requiring welfare goods upon the development thereof, this survey performed a questionnaire survey to business entities performing design, development, improvement and fitting of welfare goods. The questionnaire survey selected 879 business entities involved in manufacture and sale of the welfare goods. The effective reply recovery rate was 19.3%. The questions had the data contents required by products classified into body dimensions, motion capability, sensory functions, and work capability, asking to state data contents required for each item, reasons for the needs, and data sources. The data source currently utilized reveals that most of the replied enterprises utilize data derived from the company's own measurements, developments and experiences. The contents thereof indicate that the data are too old, the data contents do not match the current situation, and no required data are available. In designing, developing and fitting the welfare goods, the required data may not necessarily be obtained, whereas improvement in the database is strongly desired. (NEDO)

  1. Effect of surface irradiation during the photo-CVD deposition of a-Si:H thin films. Hikari CVD ho ni yoru amorphous silicon sakuseiji no kiban hikari reiki koka

    Energy Technology Data Exchange (ETDEWEB)

    Tasaka, K.; Doering, H.; Hashimoto, K.; Fujishima, A. (The University of Tokyo, Tokyo (Japan))

    1990-12-06

    This paper shows the impact of the irradiation from an additional light source during the deposition of hydrogenated amorphous silicon by photo-CVD deposition. Using a mercury sensitized photo-CVD process from Disilan (Si {sub 2} H {sub 6}) and hydrogen, silicon was deposited. A 40W low pressure mercury lamp was applied as the light source. A portion of the substrate was in addition irradiated using an Xg-He lamp through a thermal filter. Irradiation of the substrate using only Xg-He lamp produced no deposition, since this light has a wavelength which is too long to produce the SiH {sub 3}-radicals needed for Si deposition. The additional Xg-He light source was discovered to cause an increased thickness of deposited a-Si:H film and a transmission of the band structure. The reasons of these are considered that the influence of irradiation is not limited to film thickness, but that irradiation also impacts the composition of the a-Si:H film so as to cause a reduction in the hydrogen content. 10 figs., 1 tab.

  2. Fiscal 1994 survey of the base arrangement promotion for foreign coal import. Investigation on the trend of coal demand in Central and South American countries; 1994 nendo kaigaitan kiban seibi sokushin chosa. Chunanbei shokoku ni okeru sekitan jukyu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    Focusing on the present status and future of coal demand in Central/South American countries and the coal trade between Central/South American countries and the U.S., the paper described the present status and future of coal demand there and the effects on Japan. Export of Colombian coal will amount to approximately 30-35 million tons in 2000. Venezuelan coal 10-20 million tons. The U.S. imported good-quality general coal low in sulfur content, 3.08 tons from Columbia and 1.39 tons from Venezuela. Coal export from the U.S. to Central/South America was mostly of raw material coal, 5 million tons in 1993 and 5.39 million tons in 1994. General coal was 180,000 tons. The U.S. has no plans of increasing US coal export to Central/South America. But it is safely predicted that Columbia and Venezuela will increase coal export to Europe in the future. It will bring about decrease in export of US coal to Europe, which connects with increasing pressure for the coal trade amount of Japan. 21 figs., 47 tabs.

  3. Fiscal 1993 investigational report on the strengthening of the resource/energy industrial basis of CIS Central Asia (the Republic of Kazakhstan); 1993 nendo CIS Chuo Asia (Kazafusutan kyowakoku) no shigen energy sangyo kiban kyoka ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-05-01

    The paper grasps the present situation of economy and industry in Kazakhstan and studies a policy for developing the industrial machine manufacturing industry of the country. Since the independence in 1992, the country is now at the great turning point in politics, economy, society and industry. The country is forced to convert from the industrial structure of one local area where much of its own discretion had not been given under the economy system of power centralization to the industrial structure which meets the international economic market system as an independent country. Making good use of agricultural and industrial property in the former U.S.S.R., the country needs to export energy resource like oil, natural gas and coal, and abundant ore resource like iron and non-ferrous metal, which were added with values. As the technical base for it, fostering and strengthening of the industrial machine manufacturing industry is important. At present, the situation is that because of the economic sluggishness, the country cannot manufacture domestically even basic mechanical parts and simply-manufactured parts which are required by the domestic energy industry, machine manufacturing industry, and other industries. The technical program to be proposed by Japan is planned to be worked out later based on the basic research made in fiscal 1993. 6 figs., 14 tabs.

  4. Fiscal 1993 survey of the base arrangement promotion for foreign coal import. Survey of the general situation of Thai coal; 1993 nendo kaigaitan yunyu kiban seibi sokushin chosa. Thai sekitan sogo jijo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    The paper reported the energy situation in Thailand, the present and future status of coal supply/demand, the present situation of environmental policy and air pollution prevention policy and problems concerning coal and the measures for solution, and a possibility of Japan`s cooperation. In Thailand, the total coal supply amount in 1992 is 16.079 million tons, which is 9.1% of all the primary energy supply amount. The country produces only a few amount of anthracite and subbituminous coal beside brown coal. The domestic coal equals brown coal, the production of which was 15.335 million tons in 1992, 13.9% of all the primary energy demand. Concerning brown coal, 79.7% of all the brown coal supply are for electric power use, and others for industrial use such as the cement industry. The remaining reserve in developed areas is 151.4 billion tons, and the proven reserve in undeveloped areas 756 million tons. The demand for import coal was 11.25 million tons in 1996, and is expected to be 201.73 million tons in 2000. The paper pointed out some problems arising from coal production and spread of coal utilization, and described measures to solve the problems and fields where there are possibilities of Japan`s cooperation. 36 refs., 44 figs., 73 tabs.

  5. Development of GIS for feasibility study on effective use of sewage heat; Gesui netsu yuko riyo kanosei kaiseki tsuru toshite no GIS no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Ichinose, T. [National Inst. for Environmental Studies, Tsukuba (Japan); Kawahara, H. [Fujitsu Facom Information Processing Corp., Tokyo (Japan); Hanaki, K. [Univ. of Tokyo, Tokyo (Japan)] Matsuo, T. [Univ.of Tokyo (Japan). Graduate School

    1996-11-22

    Water and energy in addition to matter such as products and materials from outside flowed into the urban areas, and waste, sewage, the exhausted gas and the waste heat were released into the environment as a result of the urban action. This process is called the urban metabolism analogous to the metabolism of living things. Reducing loads to environment in the urban action is nothing but to optimize the urban metabolism structures. In this study, concerning districts of the heat supply facilities to effectively reuse the heat energy obtained from sewage being a representative unused energy in urban areas, GIS was developed for conducting the analysis on the spatial conformity to reuse the waste heat in the work of head demand and heat supply. The feasibility investigation on the effective use of the sewage heat was carried out as objective examples of 23 districts in Tokyo by using this method. It was confirmed that the relationship between heat demand and supply and the amount of usable heat depended on the land use in the district. 10 refs., 12 figs., 2 tabs.

  6. On the domestic gas discrimination system by using DSP for practical use; DSP wo riyo shita kateiyo gas shikibetsu system no jitsuyoka ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Sugahara, K.; Ushio, K.; Yea, B.; Osaki, T.; Konishi, R. [Tottori Univ. (Japan)

    1998-08-31

    The structuring method for a system of discriminating domestic gas in real-time and the result of discriminating experiments performed on hydrogen gas, alcohol vapor, and cigarette smoke using the system are reported. The system takes advantage of the dependence on temperature of the response of sensor element to the kind of gas. Output signal from the sensor is discriminated by neutral network. This system has high gas selectivity for hydrogen gas, and a system with less malfunction against alcohol vapor and cigarette smoke as compared with the conventional system can be structured by utilizing the system to such domestic units as a as alarm. 128K-word memory is used for the discriminating system, and the size of program loaded in ROM is only about 7.5K words. For the ultimate system, memory may not be required to be expanded outside for the system by using on-chip memory in a digital signal processor, and smaller scale systems can be expected to be structured. 7 refs., 6 figs., 1 tab.

  7. Quality assurance in welded structures. Part 3. ; NDT technology enhanced by computer. Yosetsu kozobutsu no hinshitsu hosho. 3. ; Computer riyo ni yoru hihakai shiken no kodoka

    Energy Technology Data Exchange (ETDEWEB)

    Matsumura, H.; Ogata, T. (Kawasaki Heavy Industries Ltd., Kobe (Japan))

    1993-09-05

    The basic theory of nondestructive testing (NDT) technology enhanced by computer and its practical example are outlined. Higher reliability of the products, reduction in production cost by automation, countermeasures for dirty, hard and dangerous works, technical communication by skilled workers, and higher efficiency of the products are the principles of enhancement of nondestructive testing. The fields of application of computer to the NDT specially handy, light and cheap micro-computer are numerical analysis, drawings, image processing, automation, artificial intelligence, measurement/control, data reserve and so forth. As for the trend of NTD advancement, radiation penetrating test, automation of probe in ultrasonic flow detection or real time measurement of inspection, three dimensional graphic expression of defect results and so forth are advanced. Future topics are the normalization of appropriate thinking of quality level and improvement and clarification of reliability of NDT. 13 refs., 5 figs., 2 tabs.

  8. Utilization of coal ash from fluidized-bed combustion boilers as road base material. Ryudosho boiler sekitan nenshobai no robanzai eno riyo

    Energy Technology Data Exchange (ETDEWEB)

    Ito, H.; Shibata, Y.; Takada, T.; Yamamuro, H. (Kawasaki Heavy Industries, Ltd., Tokyo (Japan))

    1994-07-20

    The present report reports the technological development to utilize coal ash from the fluidized-bed combustion boiler as a road base material. In case of mass production by low pressure press forming, the following hardening conditions are reported to be appropriate for kneading the ash only with water, curing it with steam and obtaining the higher compressive strength of thus hardened ash than 150kgf/cm[sup 2]: the boiler operational condition is to be adjusted so that the CaO content and char content may exceed 10% and fall bellow 20%, respectively of the coal ash. The kneading water rate is to be set around the plastic limit of coal ash. The duration of precuring and main precuring is to be 6 to 10h, at 30[degree]C and 10 to 15h at 60[degree]C, respectively. Explained is the result of mass production test with kneader, plastic former and crusher of the same structure as the presumed actual ones, and assessment test (laboratory test and field test on the road pavement) on the hardened and crushed ash with the compressive strength of 170kgf/cm[sup 2] as a pavement material. The present report also reports the operational start of a demonstration plant for the base material production. 5 refs., 11 figs., 2 tabs.

  9. Survey report on the development/utilization of petroleum substitution energy in the Pacific region; Taiheiyo chiiki sekiyu daitai energy kaihatsu riyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper collected/analyzed data on petroleum substitution energy in the Pacific region. In fiscal 1996, in addition to collection of the existing energy data, conducted were collection of energy data made retroactive from 1971, and time-series collection of the energy related expanded data including energy related production statistics/social statistics, energy consumption amount by industry, power generation facilities, oil production facilities, and environmental data. As to petroleum substitution energy, the paper took up new energy such as hydroelectric, nuclear, geothermal, photovoltaic, and wind power generation, and commercial-base renewable energy. As a result of the analysis, the supply of petroleum substitution energy in the whole Pacific region has been stable, 6.6% during 1980-1990, 7.4% in the first half of the 1990s, largely over the primary energy supply. The supply of nuclear power was overwhelmingly large, followed by hydroelectric energy and geothermal/new energy. 15 figs., 23 tabs.

  10. Forward prediction of tunnel face by use of equi-traveltime planes; Tosojimen no riyo ni yoru tunnel kiriha zenpo tansa

    Energy Technology Data Exchange (ETDEWEB)

    Ashida, Y. [Kyoto University, Kyoto (Japan). Faculty of Engineering; Hirano, T. [Nishimatsu Construction Co. Ltd., Tokyo (Japan)

    1996-05-01

    The result is reported herein of a depth transform algorithm application utilizing equi-traveltime planes in reflection seismic exploration for the purpose of knowing the structure configuration in front of the tunnel face in a tunnel excavation process. A vibration producing hole was provided 0.5m above the ground surface while a vibration receiving hole was provided at 1.5m above the ground surface, and the excavated lengths were 1.5m and 0.5m, respectively. There were 24 recording channels, from which inline offset records were taken. The on-site records were subjected to 100-1000Hz band pass filtering. The elastic wave propagation rate in the rock used for depth conversion was set at 400m/s in consideration of the distance and direct wave travel time from the vibration source to the vibration receiving point. As the result of study, weak layers were found in the neighborhood of 230-240m, 260-270m, and 280-290m. This method requires less core memory for calculation and completes calculation in a shorter period of time, which enables a conclusion that it will be effective in grasping the 3-dimensional structure in front of the tunnel face in the working scene. 4 refs., 7 figs.

  11. Exhaust Steam Use Cogeneration System at Ikeshima Coal Mine. The Result of Its Long Term Operation; Ikeshima tanko no hainetsu riyo kojenereshon sisutemu nochoki unten jisseki

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, Masahide. [Matsushima Coal Mining Corp., Nagasaki (Japan)

    1999-03-20

    Ikeshima Coal Mine of Matsushima Coal Mining Co., Ltd. is an undersea coal mine which established in the isolated island in the ocean. It is one of the two left coal mines in Japan. Ikeshima has started its coal production in 1959 and it has planned [D-Plant] to secure electricity for the power and water source for living and the industry. The plant was constructed in 1967. The capacity of the p;ant is 8,600kW electricity generation and 2,650 t/day evaporation and concentration multi type sea water to flesh water. For 32 years, [D-Plant] has kept generating electricity and supplying water, which is indispensable for coal mine operation and people who live in the island. (author)

  12. Survey on the feasibility of simple waste energy systems in medium or small cities; Chusho toshi ni okeru kan`igata haikibutsu riyo energy system no kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For effective use of wastes, the concept of a waste utilization system suitable for local characteristics of the Kyushu district was surveyed. The amount, features and processing method of wastes were surveyed for every kind of wastes and every region. Characteristics of wastes themselves and their use technologies were surveyed to study the energy system concept, and the concept was selected mainly for simple middle or small-scale systems. Main wastes available as heat source showed distinctive distributions every region. The following seven concepts were thus selected: RDF (refuse derived fuel) energy system mainly using general wastes, RDF system using wood chips and agricultural plastic wastes, co-generation system by premixed combustion of chicken manure and combustion improver, premixed combustion of livestock manure and combustion improver, methane fermentation using livestock, distillery and starch wastes, and pyrolytic oil system or gas system using agricultural plastic wastes. Establishment of any systems is difficult only in single region because of their economic scale. The collection and storage methods of raw materials should be studied. 36 figs., 40 tabs.

  13. Study on improving efficiency in hydrogen utilizing regional heat supply system; Suiso riyo chinetsu kyokyu system no koritsu kaizen ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Sueyoshi, S.; Ishitani, H.; Matsuhashi, T. [The University of Tokyo, Tokyo (Japan). Faculty of Engineering

    1997-01-30

    With an objective to improve efficiency in a hydrogen energy distribution system, discussions were given on combining heat energy supply from hydrogen with factory waste heat recovery by using hydrogen absorbing alloys. This system carries out simultaneously heat supply as a result of burning hydrogen directly and heat supply obtained by converting hydrogen pressure by using hydrogen absorbing alloys. This system could allow existing gas piping facilities to be utilized. However, since quantity of hydrogen that can be transported as pressure is smaller than quantity of heat of hydrogen itself, absorption and emission are repeated a number of times in order to utilize the heat source to a possible maximum extent. Thus, a large quantity of waste heat can be utilized when this method is used. A hydrogen manufacturing system by means of LNG reformation may be combined with this heat transportation system. When waste heat that is received is handled as having zero input in the same sense as natural energy, and heat supply from a hydrogen absorbing alloy is repeated for 50 times, the overall energy balance has resulted in a considerably good value at 0.95. 5 refs., 9 figs., 5 tabs.

  14. Development of a new hydrogen purification system by using hydrogen absorbing alloy for generator cooling; Suiso kyuzo gokin riyo hatsudenkinai suiso jundo kojo system no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Haruki, N.; Sato, J.; Kogi, T.; Nishimura, Y. [Kansai Electric Power Co., Inc., Osaka (Japan); Takeda, H. [Japan Steel works Ltd., Tokyo (Japan)] Fujita, T. [Mitsubishi Electric Corp., Tokyo (Japan)

    1997-05-20

    Hydrogen absorbing alloys have a number of useful functions, such as energy conversion, hydrogen storage and purification. As an application to separation and purification of hydrogen, we have developed a new hydrogen purification system by using a hydrogen absorbing alloy for generator cooling. For demonstration testing with an actual machine, a hydrogen recovery and purification device using 120kg of alloy was manufactured and installed on No.5 turbine-synchronous generator at Himeji No.2 power station. This device is designed to improve the purity of the hydrogen gas in generator containing impurities such as nitrogen and oxygen. The test results tell that the purity of the hydrogen gas in the generator can be enhanced from 98% to 99.9% and maintained at this level under continuous operation. An application of the hydrogen purification system is expected to decrease the generator`s windage loss, resulting higher generator efficiency. 2 refs., 18 figs.

  15. New utilization and recall of carbon dioxide in domestic and foreign countries; Saikin no naigai ni okeru tansan gas no riyo to kaishu

    Energy Technology Data Exchange (ETDEWEB)

    Hanada, M.

    1994-09-01

    This paper summarizes the utilization technologies and recovery of carbon dioxide. Carbon dioxide is manufactured from such inorganic materials as carbonates and cokes, and such organic materials as hydrocarbons and alcohols. Carbon dioxide used in refreshing beverages is manufactured by sulfuric acid decomposition of sodium bicarbonate or limestone, pyrolysis of carbonates, natural gushing, and alcohol fermentation. Sodium carbonate is obtained by using the Solvay process that uses NaCl, NH3 and CaCO3 as the raw materials, but CO2 from hydrocarbons is utilized recently. The sugar industry uses slaked lime and CO2 in cleaning raw sugar concentrates. Grain size, shape, and grain size distribution of the precipitated calcium carbonate light obtained from reaction of slaked lime and CO2 are affected by reaction temperatures and concentrations. This precipitated calcium carbonate light is used in rubber filling, paper manufacturing, and plastics. South Africa and other countries manufacture gypsum for cement by using limestone and sulfuric acid as the raw materials. The annual dispersion of CO2 from fossil fuel consumption amounts to 5.2 billion tons. Discussed as its reducing measures include fixation by sea algae, adsorption, absorption and clathration by zeolite and monoethanol amine. 8 refs., 2 figs., 6 tabs.

  16. Survey for impacts of global environmental issues on utilization of alternative energies for oil; Sekiyu daitai energy riyo chikyu kankyo eikyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    1991-03-01

    This paper makes analyses of what policy and technological option each advanced industrial country thinks to take as measures for the global warming problem, at the same time clarifying the trends in international meetings. Analyses are also made of attitudes of developing countries and the international cooperation problem. Among the problems on global warming, an emphasis is placed on introduction of energy saving and what role the development of new energy plays. A positive group consisting mostly of West European countries is advocating a `Go Quickly` approach, while the US representing a prudent group is developing a `Go Slowly` approach. The US is considering afforestation which is useful to absorb CO{sub 2} and methane recovery as technological options. West European countries regard CO{sub 2} fixation as an important option. USSR, East European and developing countries consider that the most feasible and successful CO{sub 2} measures are energy saving/improvement of energy efficiency and forest administration/afforestation. 43 figs., 78 tabs.

  17. Survey for impacts of global environmental issues on utilizations of alternative energies for oil. Sekiyu daitai energy riyo chikyu kankyo eikyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    1990-03-01

    An analysis on the factors related to carbon dioxide (CO {sub 2} ) emissions in the past, was conducted. Then, an option menu of measures to prevent global warming including alternative energy-related ones, was discussed. In the industrial world, great contribution to increasing CO {sub 2} emissions made by the economic growth factor has been offset by CO {sub 2} reductions resulting from energy conservation and fuel switching. The Soviet/East European and the developing worlds register increasing CO {sub 2} emissions. Different countries have different views of the key option to be taken in limiting CO {sub 2} emissions. Each of currently available CO {sub 2} reduction measures has its own difficulties, and none of them is able to provide a powerful means to solve global warming problems single-handedly. To begin with, it is essential to produce time to find truly effective limiting and/or adapting measures by slowing global warming as much as possible through comprehensive strategies which call for every possible effort in all the sectors. 83 figs., 92 tabs.

  18. Suppression of cell metabolism y structuring water under hydrophobic-gas pressure; Sosuisei gasu atsuryokuka ni okeru mizu no kozoka wo riyo shita saibo no taisha yokusei

    Energy Technology Data Exchange (ETDEWEB)

    Hashimoto, Atsushi; Kameoka, Takaharu [Mie University, Mie (Japan). Dept. of Bioinformation Scicence; Shiinoki, Yasuhiko; Ito, Kensuke [Snow Brand Milk Products Corp., Tokyo (Japan). Technical Research Institute

    1999-03-10

    We propose a new method to suppress cell metabolism by dissolving hydrophobic gas into intracellular water, and structuring it under hydrophobic-gas pressure. Xenon, krypton, argon, and helium gases show death inhibitory effects on all test bacteria (Escherichia coli, Pseudomonas aeruginosa, Bacillus subtilis, Staphylococcus aureus and Streptococcus salivarius) suspended in physiological saline with no nutrient component during storage under the conditions. In addition, different death inhibitory effects are observed among the five test bacteria, and this proposed method is more effective for gram-negative bacteria with thin cell walls than for gram-positive bacteria with thick cell walls. Further, xenon gas exhibit more significant effects for death inhibition than any other test gases, and the optimum initial partial pressure to inhibit the death is observed only for xenon gas in the present experimental conditions. Consequently, it is experimentally suggested that the cell metabolism can be suppressed almost perfectly by making the optimum water structure. (author)

  19. Studies on substitutional protein sources for fish meal in the diet of Japanese flounder; Hirame shiryo ni okeru miriyo shigen no riyo

    Energy Technology Data Exchange (ETDEWEB)

    Kikuchi, K.; Furuta, T.; Sakaguchi, I. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1996-08-01

    Effectiveness of livestock industry wastes and vegetable protein added to fish meal in fish farming is tested by feeding the Japanese flounder. In the experiment, a part or the whole of the fish meal protein is replaced by the meat meal (MM), meat and bone meal (MBM), corngluten meal (CGM), or dried silkworm pupa meal (SPM), and fries of the Japanese flounder are fed on the new diets for eight weeks. On a diet containing 60% or less of MM, no change is detected in the fish in terms of increase in weight, protein efficiency ratio, and blood components, indicating that 60% at the highest of fish meal may be replaced by MM. In the case of MBM, it can occupy approximately 20%. As for CGM, the proper substitution rate is approximately 40%. Essential amino acids that the new diets may lack are added for an approximately 10% improvement on the result. The SPM substitution works up to 40%, when, however, the blood components are degraded. The proper substitution rate is therefore placed at approximately 20%. 38 refs., 2 figs., 17 tabs.

  20. Utilization of coal ash from fluidized-bed combustion boilers as road base material; Sekitandaki ryudoso boiler kara no sekitanbai no robanzai to shite no riyo

    Energy Technology Data Exchange (ETDEWEB)

    Shibata, Y. [Kawasaki Heavy Industries, Ltd., Kobe (Japan); Kozasa, K. [Center for Coal Utilization, Japan, Tokyo (Japan); Tsuzura, K. [Naruto Salt Mfg. Co. Ltd., Tokushima (Japan); Izumi, H. [Nippon Hodo Co. Ltd., Tokyo (Japan)

    1998-03-01

    Coal ash from the fluidized bed boiler is evaluated for its properties as is, as solidified or granulated, and as the roadbed material. The coal ash tested in the experiment is a mixture of ash from the fluidized bed boiler bottom, ash from the cyclone separator, and ash from the bag filter. In the manufacture of solid or granulated bodies, coal ashes are kneaded in water whose amount puts the mixture near the plasticization limit, are pressed in a low-pressure press and made into solid bodies by a 15-hour curing in 60degC saturated steam, and the solid bodies are crushed into solid granules. A content release test is conducted about the release of dangerous substances, and road paving experiments are conducted to learn the workability and serviceability of the granulated material as a road paving material. A study of the experimental results discloses what is mentioned below. Coal ash containing 10-20vol% of CaO and 15vol% or less of unburnt carbon turns into a high-strength solid after curing in saturated steam whose temperature is not higher than 60degC. The granulated solid satisfies the standards that an upper subbase material is expected to satisfy. It also meets the environmental standards in a release content test for soil set forth by Environment Agency notification No.46. 8 refs., 8 figs., 4 tabs.

  1. Effective utilization of heat from incinerating brewer prime s grains and dehydrated sludge. Beer kasu dassui odei shokyakunetsu no yuko riyo

    Energy Technology Data Exchange (ETDEWEB)

    Ogawa, T. (Asahi Breweries, Ltd., Tokyo (Japan))

    1991-02-04

    Merits of treatment cost reduction and effective utilization of waste heat were obtained through effectively utilizing the waste heat from the in-plant incineration of the brewer {prime} s grains (barley grains) generated from the brewing processes, and the dehydrated sludge generated from the waste water treatment. Keeping the pace with increase in the annual manufacturing capacity at Hakata Plant, from 60,000 kl to 180,000 kl, the brewer {prime} s grain generation has increased, but these grains have become unable to be utilized as livestock feed due to the appreciation of the yen value, hence the excess is now disposed of as wastes, causing an expense increase. Therefore, these will be incinerated together with the hydrated sludge. Because dehydrating the grains will produce fluids with high BOD value, the grains are to be burned as they are, and for this reason, a fluidized bed furnace was introduced. Effects of the incineration to the environment were surveyed, and it was confirmed that the parameters agreed with the Fukuoka Municipality can be maintained. The operation was begun in June 1989. As a result of the measures applied, an annual monetary saving of about 100 million yen can be expected out of the capital investment of 350 million yen, with the return of investment estimated to be made in about four years. 21 figs., 9 tabs.

  2. Comprehensive evaluation of biomass resources using SD method-aided world energy/land utilization model; SD shuho no sekai energy tochi riyo model ni yoru

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, H. [Central Research Institute of Electric Power Industry, Tokyo (Japan); Yamaji, K. [The University of Tokyo, Tokyo (Japan)

    1996-02-01

    For the evaluation of the world-wide conflict between the utilization of biomass resources and the restrictions on land utilization, analysis was made using the system dynamics method. In the advanced area, there is scarcely any changes in land utilization, thanks to stable demand for biomass and perfect forestry protection. On the other hand, in the developing area, demand for biomass is increasing and areas of mature forests are decreasing due to imperfect forestry protection. In 2050 and after when the forests will be enjoying the same protection as that in practice in the advanced area, the forest area will stabilize. Mature forests, however, will not stop shrinking, and there will be only 400-million ha of mature forests remaining in 2100. There will be serious food shortage in the developing area because there will be a huge demand for food for livestock. Accordingly, there will be no room at all for the production of energy making crops. Both in advanced and developing areas, the potential is high of cereal residue, livestock`s dung, raw material timber residue, by-products, and refuse energy resources. On the contrary, the potential is low of kitchen refuse, paper, and chemical industry products refuse. 7 refs., 7 figs., 2 tabs.

  3. Evaluation of the performance in the solar assisted heat pump system; Taiyonetsu riyo heat pump system no seino hyoka ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Saito, Y. [Osaka Institute of Technology, Osaka (Japan)

    1996-10-27

    Performance of a solar heating system with a hydrothermal source heat pump was evaluated and compared with that of a direct solar heating system. The sun-dependency rates ({Sigma}D and {Sigma}H)of the direct system and heat pump (HP)-provided system were expressed as a function of the rate ({alpha}) of the auxiliary heat against the collected heat and as a function of the performance coefficient and {alpha}, respectively. When the sun-dependency rates are compared, it is found that the HP-provided system is the more advantageous when {Sigma}H/{Sigma}D>1. The relationship between the {alpha}`s of the two systems was clarified and computation was performed to compare the sun-dependency rates on condition that the two are equal in the heat collecting area. Although the sun-dependence rate cannot be elevated to 100% in the HP-provided system, it achieves a sun-dependency rate higher than that of the direct system even when the heat collecting area is small. In cases where the building is economically limited, for instance, with respect to the area for solar collector installation, it is advantageous to employ the HP-provided system. 5 figs., 1 tab.

  4. Performance analysis on utilization of sky radiation cooling energy for space cooling. Part 2; Hosha reikyaku riyo reibo system ni kansuru kenkyu. 2

    Energy Technology Data Exchange (ETDEWEB)

    Marushima, S.; Saito, T. [Tohoku University, Sendai (Japan)

    1996-10-27

    Studies have been made about a heat accumulation tank type cooling system making use of radiation cooling that is a kind of natural energy. The daily operating cycle of the cooling system is described below. A heat pump air conditioner performs cooling during the daytime and the exhaust heat is stored in a latent heat accumulation tank; the heat is then used for the bath and tapwater in the evening; at night radiation cooling is utilized to remove the heat remnant in the tank for the solidification of the phase change material (PCM); the solidified PCM serves as the cold heat source for the heat pump air conditioner to perform cooling. The new system decelerates urban area warming because it emits the cooler-generated waste heat not into the atmosphere but into space taking advantage of radiation cooling. Again, the cooler-generated waste heat may be utilized for energy saving and power levelling. For the examination of nighttime radiation cooling characteristics, CaCl2-5H2O and Na2HPO4-12H2O were tested as the PCM. Water was used as the heating medium. In the case of a PCM high in latent heat capacity, some work has to be done for insuring sufficient heat exchange for it by, for instance, rendering the flow rate low. The coefficient of performance of the system discussed here is three times higher than that of the air-cooled type heat pump system. 8 refs., 5 figs., 4 tabs.

  5. Performance analysis on borehole energy storage system including utilization of solar thermal and photovoltaic energies; Taiyonetsu hikari riyo wo fukumu borehole energy chozo system no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Saito, T. [Tohoku University, Sendai (Japan); Yamaguchi, A. [Matsushita Electric Co. Ltd., Osaka (Japan)

    1996-10-27

    A permanent borehole energy storage system utilizing solar energy and waste heat from coolers is simulated, to be used as an air conditioning system for super-tall buildings. A 100m-long pipe is buried vertically into the ground, and a heat medium is caused to circulate in the pipe for the exchange of heat with the soil. Thirty borehole units are used, each measuring 9m{times}9m (with the pipe pitch being 3m). Solar cells occupying half of the wall surface facing south and solar collectors installed on the roof supply electric power and heat for cooling and warming. Heat in the ground is transferred mainly by conduction but also is carried by water and gas in movement. So, an analysis is carried out using an equation in which heat and water move at the same time. Because waste heat from cooling and warming systems is accumulated in the ground and none is discharged into the air, big cities will be protected from warming (from developing heat islands). As compared with the conventional boiler-aided air conditioning system, a hybrid borehole system incorporating solar collectors and solar cells will bring about an 80% reduction in CO2 emission and annual energy consumption. 7 refs., 3 figs., 4 tabs.

  6. Study on the detached house plan using of a maximum natural energy. Part 1; Shizen energy fukugo riyo no keikaku ni kansuru kenkyu. 1

    Energy Technology Data Exchange (ETDEWEB)

    Wada, I.; Mino, M.; Miyata, T.; Okawa, M. [Nihon University, Tokyo (Japan)

    1996-10-27

    The geographical position or environment is set on the assumption that the natural energy of a detached house is used in a hybrid state. Moreover, the energy consumption of the house and the natural energy supply obtained from the geographical position were compared and investigated. As a result, the energy consumption is 10,617 kWh, and the energy supply is 8,236 kWh. About 78% of the whole consumption can be theoretically made from natural energy. The energy supply is calculated on the low side during prediction. Therefore, an increase in the energy supply is expected by installing a solar collector based on solar energy, expanding the solar panel area, and increasing the number of wind mills. However, this energy is partially lost via an inverter while it is supplied to the general domestic equipment. At the six main points in Tokyo and its districts, the adaptability of natural energy used based on the regional characteristics is investigated presently and the installation of a system is examined. 13 refs., 2 figs., 6 tabs.

  7. Study on data transmission method for power line maintenance information system using OPGW. OPGW riyo sodensen hoshu joho system no denso hoshiki ni kansuru kento

    Energy Technology Data Exchange (ETDEWEB)

    Kanemaru, K.; Toyota, S. (Hitachi Cable, Ltd., Tokyo (Japan))

    1994-02-20

    Composite fiber-optic overhead ground wires (OPGWs) installed to the major power transmission lines are applied as the information transmission routs with large capacity. An effective system for the power line maintenance operation is able to be set up by using said OPGWs to collect and transmit various kinds of maintenance information on the power lines. However, since it is necessary for the whole equipment to meet the highest transmitting speed required by the system if a single transmission method is applied throughout the power lines for transmitting the maintenance information, the system loses its economy as a whole. In this paper, for the purpose of transmitting effectively the various maintenance information in power line maintenance information system using OPGWs, and considering the required transmission period as well as the types of the data occurrence, an optic fiber transmission system constituted hierarchically and composed of high-speed trunk line and low-speed local line is suggested. Especially, regarding the low-speed local lines, random transmission method shows the superior properties in the transmission efficiency and low power-consumption compared with the cyclic transmission method. 9 refs., 9 figs., 4 tabs.

  8. Research and development of system to utilize photovoltaic energy. Survey on the specific purpose modules; Taiyoko hatsuden riyo system no kenkyu kaihatsu. Taiyoto module ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the survey results on the specific purpose modules for photovoltaic power generation in fiscal 1994. (1) On the feasibility survey on new application fields, it was clarified that photovoltaic power generation is applicable to extensive areas such as farmland, road, railway and public facility as latent demand sites. (2) On the optimum modules for various specific purposes, the structure, production method, cost estimation and issues of various modules were studied for desert, wasteland, coast, ocean, river, embankment, railway, road, mobile facility and arcade. (3) On the survey on new materials and material development, various conventional materials and materials promising for required performance were surveyed for every application. (4) On the survey on technology trends, the survey members participated in the first international photovoltaic energy conversion conference and the photovoltaic power generation workshop, while the members held the 1st-5th specific purpose module subcommittees. 1 tab.

  9. Overview of FY1997 human media technology R and D; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu seido Shin energy Sangyo Gijutsu sogo Kaihatsu Kiko itaku jigyo. Human media no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper reports a summary of results in fiscal 1997 of research and development of human media technology. Fiscal 1997 launched design and trial fabrication of the following items: interface to improve efficiency and safety of plant operators, accommodation of multimedia contents to aid Kansei design, city development design aiding technologies using contents retrieval and presentation technologies and virtual reality, and empirical evaluation technologies for safety, comfort and convenience. Specific study assignments were extracted on a virtual media technology, a Kansei media technology and a knowledge media technology being three elementary technologies for human media to make clear the research and development approaches to be taken in the coming fiscal years. In addition, a human media technology committee, a research and development working group, and an investigation working group were established. Also launched were investigations on research trends in the human media technology, and investigative researches on contacts of information needs in industries with human media. 59 refs., 114 figs., 24 tabs.

  10. Achievement report for fiscal 1998 on the research and development of genome informatics technology. Development of energy use rationalization technologies; 1998 nendo genome informatics gijutsu kenkyu kaihatsu seika hokokusho. Energy shiyo gorika gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In the field of the analysis of gene expression frequency information, a novel glass coating method and a highly sensitive high-speed reading device are developed. Element technologies are studied for the development of a detection system capable of high-density high-speed reading of high-density DNA capillary array, with a long-chain DNA probe solidified therein. In the technology of transcription control information analysis, concerning the technology of transcription dynamics analysis using tagged transcription control factors, the construction of a model system protocol is studied, an automatic analysis system is developed, and an evaluation technology is also developed. Furthermore, a novel method is proposed, in which two specimens will be prepared, that is, a microbead coupled DNA specimen consisting of base sequences of all combinations of a certain chain length and a cDNA (complementary deoxyribonucleic acid) derived protein specimen, and DNA-protein complexes will be isolated for analysis bead by bead out of a liquid which is a mixture of the said two specimens. (NEDO)

  11. Trend of recent motor sports related technology. From engine point of view; Saikin no motor sports ni okeru saishin gijutsu no doko. Engine no shiten kara mita gijutsu doko

    Energy Technology Data Exchange (ETDEWEB)

    Okamoto, T. [Toyota Motor Corp., Aichi (Japan)

    2000-02-01

    This paper presents the trend of the motorsports related technology focusing on F1, Champ Car and Le Man using high technology and high fundamental technology. Indeed each category of these three has its own regulation. Therefore the difference in the regulations which depends on the restriction level for usable technology requires different technological development. One is using real high technology while another is using high fundamental technology. Taking these affairs into account, characteristic of the each technology for each motor sports category is described from engine point of view. (author)

  12. Fiscal 1998 research report. R and D on super metal (Al system mesoscopic texture-controlled material); 1998 nendo seika hokokusho. Super metal no gijutsu kaihatsu (aluminium kei mesoscopic soshiki seigyo zairyo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For development of Al materials with superior industrial characteristics (strength, corrosion resistance), this research has promoted development of large-size Al system materials with mesoscopic crystalline texture by high- strain accumulation control technology, and recovery and recrystallization control technology. In this fiscal year, (1) basic study on high-strain accumulation control technology, (2) study on a formation mechanism of ultra- fine crystal grains, and (3) development of a machining process were made. In (1), basic study on low-temperature rolling and study on rolling by rollers having different peripheral speeds were made. In (2), study on refining of recrystallized grains of 5000-base and 7000-base alloys was made. In (3), a low-temperature rolling equipment, and a ultra-rapid heating device were introduced. For the whole R and D project on super metal, the main research facilities such as a low-temperature rolling body for high- strain accumulation and a high-strain accumulative structure formation equipment (melt rolling equipment) for uniform nucleus formation in recrystallization were introduced to gain a firm foothold for the future application research. (NEDO)

  13. Fiscal 1996 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1996 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `chosentan denshi gijutsu kaihatsu sokushin jigyo`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    For the purpose of establishing ultra high technology of a next next generation level which is a basic technology in the electronic information field, a key to the realization of the high grade information society and a common technology base giving marked influences to the wide range industrial field, the R and D was started of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology to draw pictures on metal and crystal surfaces using ultra short wavelength laser beams, shading system technology of shading mask to be used to the process of drawing ultra high accuracy and complicated figures, ultra high tech plasma reactive measuring/analysis/control technologies which become the base of ultra thin films and ultra fine etching using plasma, ultra high tech cleaning base technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. 137 refs., 358 figs., 38 tabs.

  14. Report on the invitation program for developing countries concerning technology promotion project of global environmental industry in FY 1997; 1997 nendo chikyu kankyo sangyo gijutsu suishin jigyo ni kakawaru chikyu kankyo kanren gijutsu kaigai kenkyusha shohei jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In an effort to help preserve the global environment, International Center for Environmental Technology Transfer (ICETT) contributes to the solution of global environmental problems by promoting research exchanges with developing countries. As a part of this effort, ICETT hosted an environmental development researcher who visited Japan from the Institute of Environmental Research of Chulalongkorn University in Bangkok, Thailand. The invitation was extended at the request of NEDO. During the period of this investigation between September 16 and December 14, 1997, a photocatalyst was prepared and its performance was evaluated under the theme ``Application of photocatalysis to purification of atmospheric environment.`` At the same time, roadside test spots were inspected to study the practical application of optical photocatalysis. The visiting researcher also visited the National Institute for Resources and Environment to discuss with the staff of institute. This helped to deepen understandings of the state of air pollution problems confronting Japan, Europe, and North America, as well as issues related to the technologies that have been developed to solve these problems. The visiting researcher toured the RITE and examined Japan`s progress in the development of environmental control technology through joint research involving government, industry, and academia. At ICETT, the visiting researcher received training in Japan`s approaches to environmental problems in developing countries

  15. Achievement report for fiscal 1998 on the research and development of environmental technologies such as recycling. 2. Technology for reducing automobile running noise; 1998 nendo recycle nado kankyo gijutsu kenkyu kaihatsu seika hokokusho. 2. Jidosha sokoon teigen gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Experiments and studies are conducted for reducing along-the-road automobile running noise. In the study of noise generation due to tire vibration, it is found that the main mechanism of noise generation on a well-drained pavement is the vibration of tires. A calculation model is built for estimating the vibration of the tire belt from the characteristics of the road surface and the tire. In the study of air column resonance in the tread groove, a method is studied of measuring fluctuations in the sound pressure in the tread groove. Measurement is conducted, and it is found that the generally accepted explanation, in which air column resonance is attributed to tread vibration generated upon collision of the tire with the road surface, needs further study for substantiation. In a model experiment, it is found that air column resonance hardly occurs on a well-drained pavement. In the study of hydroplaning, it is found that, even when the total volume of the tread longitudinal grooves is the same, the hydroplaning performance tends to improve when the groove arrangement and crown curvature are proper. (NEDO)

  16. FY 1999 report on the development of technology to recycle architectural waste materials, glass, etc. Development of technology to recycle architectural waste materials; 1999 nendo kenchiku haizai glass nado recycle gijutsu kaihatsu seika hokokusho. Kenchiku haizai recycle gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    Waste wood materials in the materials discharged from architectural disassembly were regarded as a potential wood resource, and the R and D of the technology to recycle these were conducted. Studies were made on the technology to finely grind waste wood materials, technology to compress/form waste wood materials and ground wood powder, verification of strength characteristics/dimension stability of the formed wood materials, etc. As to the wood materials which were badly degraded under ultra violet rays, they were coloring-processed by the steam treatment, and a possibility of coating substitution was confirmed. In relation to the technology to produce compressed wood materials, the optimization of heat treatment conditions was experimentally conducted. About the technology to give dimensional stability, dimensional stability was improved as a result of the improvement of chemicals feeding and the development of chemically processed drugs. In the development of light formed products, the board was successfully formed which is light in weight using lignocelluloses/inorganic hydrates and has the bending strength higher than that of the plaster board. In the development of interior materials, the technology was developed in which ground wood powder and thermo-plastic resin are mixed for die molding, and the OA floor using this was commercialized. (NEDO)

  17. Study on application of the information security technology. Survey on a technology to assure safety on communication routes; Joho security gijutsu no tekiyo kenkyu. Tsushin keirojo no anzen hosho gijutsu no chosa

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, S. [Kansai Electric Power Co. Inc., Osaka (Japan)

    1998-11-10

    This paper describes the communication information security technology. Encoding is a generic term for the method to make data unreadable to persons other than those authorized. Of the encoding algorithms in the Internet, the common key system uses the same key for both of encoding and decoding, where the same key is shared and maintained confidentially by a transmitter and a receiver. The open key system uses two keys made in two pairs called an open key and a confidential key. Encoding is performed by using the open key possessed by a transmitter and decoding is possible only by the counterpart possessing the confidential key. Good points of both systems are combined and mounted in actual systems. This paper also describes a verification technology as a mechanism to prevent unauthorized data alteration. In security protocols, security function (encoding) is added to a communication protocol. The virtual private network has come recently to the practical application phase to realize such an environment that a dedicated line is installed virtually on an Internet line by applying the encoding technology, making it possible to structure a low-cost and safe communication routes. (NEDO)

  18. Improvement of vibration and noise by applying analysis technology. Development of active control technique of engine noise in a car cabin. Kaiseki gijutsu wo oyoshita shindo-soon no kaizen. Shashitsunai engine soon akutibu seigyo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Uchida, H.; Nakao, N.; Butsuen, T. (Matsuda Motor Corp., Hiroshima (Japan). Technology Research Inst.)

    1994-06-01

    It is difficult to reduce engine noise which is principal noise in a car cabin without producing an adverse effect on low cost production. Active noise control technique (ANC) has been developed to reduce engine noise compatible with low cost production. This paper discusses its control algorithm and the system configuration and presents experimental results. The filtered-x least mean square method is a well-known ANC algorithm, however, it often requires large amount of calculation exceeding the present capacity of a digital signal processor. An effective ANC algorithm is developed by the use of the repetitiveness of the engine noise. This paper describes the basic theory of the control algorithm, the extension to a multiple input and output system, the system configuration and experimental results. A noise control system with three microphones is designed with consideration of the spatial distribution of the noise and reduces noise in the whole cabin by 8dB(A) in the largest case. Active noise control technique is applicable to many areas and can be used for the reduction of noise and vibration other than engine noise. 5 refs., 7 figs., 1 tab.

  19. Recent exploration and production technologies on natural gas; 20 seiki ni okeru tennengasu kaihatsu gijutsu no henkan. Tanko oyobi kaihatsu {center_dot} seisan gijutsu no gaiyo to sono suii

    Energy Technology Data Exchange (ETDEWEB)

    Tada, Y. [Japan National Oil Corp., Tokyo (Japan). Natural Gas and Project Planning Dept.

    2000-03-20

    New diplomatic policies based on energy diversification and multinational cooperation, the rapid growth of economic development and energy demand, and the social consideration of preventing environmental pollution (such as CO{sup 2} emissions, acid rain, destruction of the ozone layer and global warming) have caused the utilization of natural gas resources to become the new energy trend. Exploration and production technologies for natural gas are basically very similar to those for crude oil. They also consist of various relevant technical aspects such as gravity survey, seismic survey, logging, well drilling, reservoir simulation, field development planning and production monitoring. Additionally, the oil and gas industry has been continuously making efforts to resolve various technical issues and improve its performance and efficiency. For the past ten years, as the result of these tremendous and ceaseless efforts, we have obtained various innovations and reduced risks and costs. Furthermore, new natural gas utilization technologies such as GTL (Gas to liquid), DME(Di-methyl ether), fuel cell and hythane are now under development and moreover, it's expected that the utilization of natural gas resources will further increase. This paper briefly explains the outline of exploration and production technologies applied to natural gas in the world. (author)

  20. Advanced industrial technologies by the Tohoku National Industrial Research Institute. ADI function grading by the temperature gradient type austenpering treatment; Tohoku kogyo gijutsu kenkyusho sentan kogyo gijutsu. Ondo kobaigata austenper shori ni yoru ADI keisha kinoka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-10-15

    The advanced industrial technologies were introduced which are under research in the Tohoku National Industrial Research Institute. As for the research to grade the ADI function by the temperature gradient type austempering treatment, an ADI was produced which was graded in both hardness and toughness by austenpering-treating a graphite cast iron sphere. As for the research on the lamination by plating, a composite which was high in lamination strength and low in residual stress was produced by plating the base sheet with a thin film, giving a compressive force and heating it in vacuum in order to produce the composite with ceramics-metal or interceramics lamination. As for the research on the removing method of iron ions from the plating solution, a chelate resin was produced which contained multidentate ligands similar to the nitrirotriacetic acid selectively adsorbing the iron ions. As for the research to evaluate the corrosion of steel in the geothermal water, geothermal hot water in Miyagi Prefecture was experimentally evaluated in damaged quantity of carbon steel and stainless steel. Then, the damaged quantity even of carbon steel was shown to be within the usable limits as a construction structural material. 5 refs., 26 figs., 2 tabs.

  1. Survey of history/succession of industrial technology. Book of survey of the domestic industrial technology which contributed greatly to the industrial development; Sangyo gijutsu rekishi keisho chosa. Sangyo no hatten ni okiku kiyoshita kokunai sangyo gijutsu no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper surveyed a history of the industrial technology development which contributed to the innovation of technology in Japan for contribution to the future selection of technical themes and decision on developmental methods. In accordance with the increasing contribution of the Japanese industrial technology to scientific and economic activities in Japan and abroad, it is important to clarify a historical significance of the industrial technology and to make the most of results of the survey for the future succession/development of industrial technology. The survey focused on chemical processes brought up as the Japanese industrial technology which is regarded as world-famous and on the systematical study of the history of the Japanese scientific technology. Hereafter, this becomes a guiding principle for engineers. The paper arranged the survey results of production processes of 2-ethylhexanol, acrylic acid, acrylamide, and cresol/resorcinol, optical resolution process of amino acids, and flue gas desulfurization process. The paper also surveyed technologies of ammonia synthesis, coal liquefaction, high polymer film production and synthesis of medical raw materials. The results were obtained which are suggestive for developing creative/original technology. 210 refs., 93 figs., 49 tabs.

  2. Fiscal 1997 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1997 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `Chosentan denshi gijutsu kaihatsu sokushin jigyo`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    For the purpose of establishing ultra high technology of a next next generation level, the R and D was conducted of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology, ultra high accuracy shading system technology, ultra high tech plasma reactive measuring/analysis/control technology, ultra high tech cleaning basic technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. This R and D is a greatly influential basic research in the whole industrial field, and therefore, it is necessary that researchers standing foremost in each field of industry/university/government join the project and that various R and D infrastructures are made the most of. For this, the concentrated joint research method and the dispersed joint research method are combined, and the R and D is being conduced by equal partnership of each researcher. 421 refs., 823 figs., 91 tabs.

  3. Research and development of evaluation system for photovoltaic power generation system. Research and survey on test and evaluation method for BOS component devices; Taiyoko hatsuden system hyoka gijutsu no kenkyu kaihatsu. Shuhen gijutsu hyoka system no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on R and D of the evaluation method for BOS component devices in fiscal 1994. (1) On the study on requirements of BOS component devices for practical use, the study results on storage battery, inverter, protective device for system interconnection, and effective use means for storage battery were summarized. On the future device technology, it was clarified that the following value added technologies are promising: simple design of inverter circuit, cost reduction by common specification and mass production, and stabilization of voltage and compensation of momentary peak load by combining inverter with small-capacity storage batteries. (2) On the study on the performance test method for BOS component devices, basic characteristic (capacity, efficiency) test, PSOC charge/discharge cycle test, and accelerated life cycle test were performed for 4 kinds of new storage batteries developed by NEDO. The whole characteristic test results satisfied specifications, and long-term cycle test is in promotion for all new storage batteries. 3 figs., 4 tabs.

  4. Research and development of evaluation system for photovoltaic power generation system. Research and development on evaluation technology of photovoltaic power generating systems; Taiyoko hatsuden system hyoka gijutsu no kenkyu kaihatsu. System hyoka gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on R and D of evaluation technology for photovoltaic power generating systems in fiscal 1994. (1) On preparation of test facility and measuring instrument, the pyrheliometer with a photovoltaic device as sensor was developed. (2) On collection and analysis of data, operation data of interconnection system, stand alone system, and water pump system were collected, and energy flow was analyzed. The following were also analyzed: time variation of a-Si solar cell modules, fluctuation correction factor of spectrum response, that of nonlinear response of crystalline solar cells, effect of solar radiation intensity and wind velocity on temperature rise of modules, and correction factor of DC circuit losses. (3) On on-site measurement technology, the array output measuring instrument was developed on the basis of capacitor charge system. (4) On simulation technology, simulation analyses of energy flow, optimum capacity of interconnection systems, correction factor of solar radiation, and capacity of array storage batteries were conducted. 3 figs., 6 tabs.

  5. Waste gas treatment technology at steelmaking plants. Seitetsu setsubi ni okeru hai gas shori gijutsu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, M.; Shimizu, K.; Deshimaru, K.; Watari, S. (Nihon Univ., Narashino, Chiba (Japan). Coll. of Industrial Technology)

    1992-11-30

    A variety of furnaces are employed for steelmaking. The waste gases from these furnaces are used as fuel gases or flared to the atmosphere. For the enhancement of energy efficiency at these plants and the improvement of environment, it is essential to remove the impurities contained in the waste gases, such as soot, dust, NOx and SOx with high efficiency at the lowest possible cost. In coke oven and sintering furnace, soot and dust consisting of sulphuric element, cyanogenic element and fume of alkali metals as main constituents are the subject of treatment, because these elements were contained in the raw materials. And, in blast furnace and LD converter, soot and dust are the subject of treatment because the materials have already been treated under high-temperature and the waste gases contain little chemical impurities consequently. On the other hand, in various combustion furnaces, purified by-product gases, such as the above mentioned BFG (blast furnace gas), LDG (LD converter gas) and COG (coke oven gas), etc., are used frequently and NOx generated by the high-temperature combustion is often the subject of treatment. In this report, the waste gas treatment technology developed by Nippon Steel Corporation for these various furnaces was described. 10 figs., 2 tabs.

  6. 53rd Cement Technical Conference. Expansion and contraction 1; Dai 53 kai semento gijutsu taikai. Bocho, shushuku 1

    Energy Technology Data Exchange (ETDEWEB)

    Shimomura, Takumi [Nagaoka University of Technology, Niigata (Japan)

    1999-08-10

    Mokuzen et al studied the relationship of gas pressure and speed constant while deriving suction speed constant from the results of suction experiments of gas molecule to minute pore wall, and discussed what changes will occur caused by different cement water ratio and ages of the cement. Baba et al reported the experiment results concerning changing of gap pressure and contraction of very initial age cement paste under dry and non-dry conditions. Yamada et al reported the experiment results concerning water motion and contraction properties inside plane plate specimens of super high strength concrete. Imori et al reported the experiment results of shearing resistance of reinforced concrete beams that have cracks pre-introduced in cross section by dry contraction or temperature stress, and discussed its calculation method. Hotta et al studied the experimental method concerning volume changing of cement paste including that before agglutination, and reported the experiment results. (NEDO)

  7. Researches and studies about technological trend of `functionally gradient materials`; Keisha kino zairyo no gijutsu doko ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Morishima, H. [Information Center of Exploitation of Petroleum, Tokyo (Japan)

    1995-09-01

    Introduced herein is a summary of the technological research report about functionally gradient materials that was presented by Information Center of Exploration of Petroleum in fiscal 1994. The functionally gradient material was realized in the 1980s thanks to more than 30 technologies industrial or government sector bodies interested in science and technology, which effort was related to Japan`s recoverable manned spaceplane program. The material, equipped with the high thermal conductivity and mechanical strength required of a material to cover the spaceplane body, was born out of a innovative idea in which the constitution, etc., of two different materials should continuously change for the elimination of any boundary between the two now that a direct bondage of a metal and ceramics would after all experience separation or cracking. The new idea enabled a plurality of desired functions to be freely distributed within the material, creating hopes in various fields. It has been found that probabilities are high that the functionally gradient material will improve at a surprising rate the conversion rate in utilizing thermoelectricity, photoelectricity, or nuclear energy. In the oil industry, studies are under way to use the new material in petroleum exploration, etc., that have to be undertaken under severe conditions. 1 ref., 2 figs., 2 tabs.

  8. Research on EBEP (Electron Beam Excited Plasma) applications; EBEP (denshi beam reiki plasma) no tekiyo gijutsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Yanase, E.; Ryoji, M.; Mori, Y.; Tokai, M. [Kawasaki Heavy Industries, Ltd., Kobe (Japan)

    1996-04-20

    Research and development is actively conducted on machining technologies using plasma in various fields, with studies energetically pursued on etching techniques or those of forming a thin film by the use of high frequency and microwave plasma. The EBEP system jointly developed by Kawasaki Heavy Industries Ltd. and Institute of Physical and Chemical Research is a plasma source for forming a high density plasma by implanting into a plasma chamber from the outside a high-current electron beam accelerated to an energy of approximately 60 to 100eV where the collision cross-section of gas ionization is maximized. The characteristics of the system are such as (1) it enables electron energy distribution to be controlled from outside by varying acceleration voltage, (2) it excels in the controllability of ion energy and (3) it allows to form a steady high-density plasma in a nonmagnetic field. This paper presents the generating principle of EBEP, its plasma characteristics, etching technique using EBEP, thin film forming technique by EBEP-CVD method, and multipurpose apparatus for research and development. 6 refs., 7 figs., 1 tab.

  9. Production cars' featuring technologies derived from motor sports; Motor sports de hagukumareta shihansha no yoso gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-02-01

    Many recent innovative automotive technologies are derived from motor racing. This paper focuses on some applications of these leading-edge technologies to production cars. (1) Mitsubishi's vehicle technology, derived from its World Rally Championship car 'LANCER'. (2) Toyota's racing engine technology. (3) Subaru's center differential technology, derived from its 4WD competition car 'IMPREZA'. (4) Nissan's aerodynamic and highly rigid body structure applied to 'SKYLINE'. (5) Hino's heavy duty truck air suspension system, derived from 'CAMION'. (author)

  10. Execution management of batter piles and problems of technical development. Uchikomi kui no seko kanri to gijutsu kaihatsu no kadai

    Energy Technology Data Exchange (ETDEWEB)

    Ninomiya, Y. (JDC Corp., Tokyo (Japan)); Omori, H. (Nippon Kokan Koji K.K., Yokohama (Japan))

    1991-05-15

    This report introduces the practical examples of the present system of execution manegement. Necessary functions and basic problems are described as well as the possibility of utilizing hydraulic/pneumatic pressure for the automation or the robotization which are the future technical problems. Application examples are also shown on the execution management system by means of an accelometer which was developed by the authors. This area is not long after the start of study. Essential points of the execution management of the batter piles are that the front tips of the piles are confirmed to be securely penetrated to the specified depth in the specific support layer giving the required supporting strength at the same time. For this purpose, what are required are to accurately measure the penetration displacement of the piles and assess the maximum penetration and final penetration and the amount of the rebound. Then the support strength should be checked from the dynamic support force. For this, it is required to develop an execution management system which is simple and adept for the operation at the spot. 9 refs., 12 figs., 5 tabs.

  11. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (technical development of materials to heighten efficiency of power generation facilities); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (hatsuden shisetsuyo koseinoka zairyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described the fiscal 1997 results of the study of the condensation base precise structure control conducted as a technical development of materials to heighten efficiency of power generation facilities. Condensation base polymer is an important material which occupies most of the engineering plastics. The study is aimed at developing basic technologies on the molecular weight and regularity by which a remarkable improvement can be expected in performance of condensation polymerization/ring-opening polymerization polymer materials, polymerization catalyst which arbitarily controls the primary structure such as branch and end group structures, and development of the precision polymerization process. In the synthesis of ordered polymer by direct polycondensation, synthesis of ordered polyamide from asymmetric monomers is studied. In the synthesis of chemically selective polyamide by direct polymerization, polyamide with functional group is synthesized by polymerizing without protecting functional group the monomer with such functional group as causes side reaction in polymerization. In the synthesis of polyamide having the limited distribution of molecular weight, the molecular weight/distribution of polyamide are controlled by connectedly conducting polycondensation which is itself to be done successively. 91 refs., 72 figs., 43 tabs.

  12. Arrangement of technical information on photovoltaic power generation systems; Taiyoko hatsuden system kanren gijutsu joho no seibi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In order to effectively contribute to the development of the technology required to put them to practical use, technical information on photovoltaic power generation systems, such as the results of overseas and domestic research and development work, which have been obtained by NEDO, were collected, categorized, sorted, and processed to make a data base. This report presents the details of the project for fiscal 1995. Papers from the 10th ECPVSEC held at Lisbon, Portugal in April 1991 and the 6th PVSEC held at New Delhi, India in February 1992, and papers published by NEDO were investigated and arranged. The total number of the papers processed in 1995 is 424 from two international conferences, and 176 from NEDO. The implementation steps consist of the collection of overseas and domestic research reports and other documents, the preparation of summaries of research results reported in those documents, the preparation of brief summaries of data obtained from the results of experiments including numerical data, and the sort and processing of them by research area, material used to fabricate photovoltaic cells, etc. The results of the above work are stored on 3.5 inch floppy disks as MS-DOS text data. The report also provides the general publication through the Internet. 7 tabs.

  13. Survey of regulations accompanied with isolation technology of carbon dioxide; Nisanka tanso no kakuri gijutsu ni tomonau hokisei no chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Regulations, conventions and agreements relating to the discharging liquefied carbon dioxide (CO2) into the bathypelagic zone from a cruising ships are investigated. The ocean storage of CO2 is not specifically prohibited by law, but must be regulated on a global scale because such treatment may impact the marine environment. In principle, treatment with impact on the nature is prohibited. Laws of environmental conservation are completed in European, Asian, and Pacific countries, which join international conventions and committees with high interests. It is suggested that the engineering technique of the storage should be improved to observe regulations and that an impact assessment for the ocean storage should be carefully conducted in full understanding of the basic premise of the regulatory systems or organizations. Furthermore, it is significant to study on the possible effect of the ocean storage of CO2 on global warming and life-cycle assessment inventory analysis, namely the balance of the energy budget between the separation and the ocean storage of CO2. 23 refs., 7 figs., 6 tabs.

  14. Present situation and prospects of development of photovoltaic power generation technologies. Taiyoko hatsuden gijutsu kaihatsu no genjo to tenbo

    Energy Technology Data Exchange (ETDEWEB)

    Yoshimi, Tetsuo (Kyocera Corp., Kyoto, (Japan))

    1990-02-10

    Around 1975 when research and trial production of solar cells were started, the price per 1Wp solar cell was tens of thousand yen. Afterward with the technical progress, it was decreased to the 700 yen level and the production amount is constantly increasing. Based on the theme of New Energy and Industrial Technology Development Organization project, methane gas hybrid system which is the combination of photovoltaic power generation and gas engine power generation with methane fermentation of excreta of domestic animals of livestock breeders who are obliged to move to places far from cities and who have no commercial power sources, photovoltaic-small quantity hydraulic power generation hybrid which supplies lighting to buildings of regional public organizations with the combination of hydraulic power generation utilizing medium and small sized rivers in the neighborhood, photovoltaic-wind power generation hybrid, and photovoltaic power generation systems for villages of Indonesia which are not electrified yet and whose natural environment is quite different from that of Japan are being pushed forward. In the future, the price of the photovoltaic power generation system must be further lowered, and its development must be further pushed for ward as one of measures to cope with the problems of the global environment. 4 figs., 1 tab.

  15. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the application technology of functional protein complex (R and D of the high-functional maintenance technology for power plants); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Kinosei tanpakushitsu shugotai oyo gijutsu no kenkyu kaihatsu (hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In order to develop advanced maintenance technology for power generation facilities, application technology of functional protein complexes is under investigation. On a light controllable enzymatic reaction system, construction of a light controllable bio-reactor by physico-chemical and bio- chemical techniques, and structure and functions of a photosynthetic protein complex using thermophilic cyanobacteria as material are under investigation. On a molecular mechanism for recognition and reaction of receptor proteins, structure analysis and engineering application of glutamate receptor channels of a synaptic transmission system, and basic study and material proteins for artificial structures using endocytic micromachinery, and a multi-enzyme system for synthesis of glycosphingolipids are under investigation. On a complex oxidation/reduction system by genetic engineering technique, construction of a high- efficiency stable system with functionally arranged oxidoreductase and electron transmission systems in biomembranes is in promotion. Research work was also made on molecular assemblies for a functional protein system. 166 refs., 91 figs., 9 tabs.

  16. Report on the present situation of the FY 1998 technical literature database; 1998 nendo gijutsu bunken database nado genjo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    To study database which contributes to the future scientific technology information distribution, survey/analysis were conducted of the present status of the service supply side. In the survey on the database trend, the trend of relations between DB producers and distributors was investigated. As a result, there were seen the increase in DB producers, expansion of internet/distribution/service, etc., and there were no changes in the U.S.-centered structure. Further, it was recognized that the DB service in the internet age now faces the time of change as seen in existing producers' response to internet, on-line service of primary information source, creation of new on-line service, etc. By the internet impact, the following are predicted for the future DB service: slump of producers without strong points and gateway type distributors, appearance of new types of DB service, etc. (NEDO)

  17. Trends of solution technologies related to water quality; Suishitsu kanren solution no gijutsu no doko to tenbo

    Energy Technology Data Exchange (ETDEWEB)

    Saito, H.; Kazama, K.; Fukuda, M. [Fuji Electric Co. Ltd., Tokyo (Japan)

    1997-06-10

    This paper reviews essential problems of water environment and trends of solution technologies related to water quality problems promoted by Fuji Electric. They have developed a water quality safety monitor for high-sensitivity monitoring of river water and lake water, and a water quality control system for supporting river managers during water quality accidents. For the water quality safety monitor, nitrification bacteria sensitive to toxicants are fixed as bacterial membrane, and it is attached on the dissolved oxygen electrode. Toxicants mixed in the river water can be detected by determining the activity of nitrification bacteria from the change of dissolved oxygen consumption. This provides ten times of detecting sensibility compared with fish. A coagulation sensor has been also developed for the low turbidity operation during water purifying process and the optimal injection of coagulants. High-performance ozonizers have been developed for advanced treatment of purified water. Using this, nasty smell and precursors of trihalomethane in drinking water can be strongly decomposed. For the field of sewage water, a biosensor has been developed. It takes only 20 minutes to measure BOD, which took 5 days previously. For the treatment technology, a two-tank type intermittent aeration activated sludge process has been completed, which provides a remarkable removing effect of nitrogen and phosphorus in sewage water. 18 refs., 2 figs.

  18. Project to promote exchange of international information on environmental technologies; Kankyo gijutsu kokusai joho koryu sokushin jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Mutual information exchange at international levels is important for practical application of global environment preservation technologies, whereas the APEC Virtual Center was established in fiscal 1997. Fiscal 1998 has discussed the future functions of the Virtual Center, and carried out the following matters to improve the functions and achieve its stable operation. Discussions were given on common use with the centers of other countries and regions of the specifications of classification systems for information areas and provided information that are provided by the Virtual Center. Visits were made to sub-managing countries and regions for smooth operation of the study groups, and opinions were exchanged. Visits were made to coordinators and contact points established in each country and region when the Center was founded in fiscal 1997. A visit was made to the U.S. Environmental Protection Agency to exchange opinions on coordination measures with the Cleaner Production Strategy of the U.S.A. being a project similar to the subject project. In order to strengthen the Japan's Center, attempts were made to expand the linking information to wider scope. Special pages publishing concentratedly the items of information that the users are interested were prepared as part of the information provision. (NEDO)

  19. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the ultimate manipulation technology of atoms and molecules (R and D of the formation of advanced materials for power generation environment); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho (hatsuden kankyoyo kokino sozai keisei gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes R and D of the ultimate manipulation technology of atoms and molecules (atom technology). Ten nanoscale Ge islands were successfully formed in proper positions on an Si substrate surface by using mask technology of nanoscale atomic layers. Growth of less-defect ZnSe films on a GaAs(110) surface was possible under various conditions. The magnetic transfer mechanism of Mn oxide with huge reluctance was clarified. Through study on selective-area deposition of Si on plasma-oxidized ultrathin SiO2 mask layers patterned by direct electron-beam exposure and an idea of SiO2/SiNx bilayer mask, direct use of the ultrathin mask layer as insulating layer in device structure was achieved. The superior property as electron beam resist of methano- fullerene composed of fullerene C60 with side chains including oxygen was clarified. The initial oxidation process of an Si(100) surface was analyzed, and the observation result by SREM was theoretically explained. Development of a high-resolution spin polarization electron microscope was also mentioned. 48 refs., 145 figs., 20 tabs.

  20. Development of regeneration technique for diesel particulate filter made of porous metal; Kinzoku takotai DPF no saisei gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Yoro, K.; Ban, S.; Ooka, T.; Saito, H.; Oji, M.; Nakajima, S.; Okamoto, S. [Sumitomo Electric Industries, Ltd., Osaka (Japan)

    1997-10-01

    We have developed the diesel particulate filter (DPF) in which porous metal is used for a filter because of its high thermal conductivity and a radiation heater is used for a regeneration device because of its uniform thermal distribution. In the case high trapping efficiency is required, filter thickness should be thick. The thicker filter has a disadvantage of difficulty in regeneration because of the thermal distribution in the direction of thickness. In order to improve regeneration efficiency, we designed the best filter-heater construction which achieves uniform thermal distribution by using computer simulation and we confirmed good regeneration efficiency in the experiment. 4 refs., 14 figs., 1 tab.

  1. Development of stabilizing control systems for preventing expansion of loss of synchronism; Denryoku keito anteika system no gijutsu doko

    Energy Technology Data Exchange (ETDEWEB)

    Sato, M.; Hirokawa, T.; Tsukui, R. [Toshiba Corp., Tokyo (Japan)

    1995-11-01

    The size and complexity of electric power systems has been increasing as a result of the construction of new generators, subsections, and lines to meet the steady growth in load demand. Electricity is an essential form of energy that supports society, and utilities are required to ensure high-quality electricity supplies without interruption. However, faults such as lightning may cause loss of synchronism among generators, leading to a blackout. In order to prevent such an expansion of loss of synchronism, many systems based on the latest technologies have been developed and applied. This paper outlines various types of disturbances that occur in electric power systems, and describes approaches and systems for preventing blackouts. In addition, a description is given of new functions that will be required in the near future in order to maintain the stability of electric power networks. 1 fig., 4 tabs.

  2. Study of evaluation for grouting effect in a borehole; Yakueki chunyu koka hyoka gijutsu ni okeru ichikosatsu

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, H.; Matsuo, T. [Fukuoka Municipal Transportation Bureau, Fukuoka (Japan); Yamauchi, Y.; Imanishi, H. [Osaka Soil Test, Osaka (Japan)

    1996-10-01

    For the foundation improvement works by grouting in a borehole, evaluation of grouting effect is one of the most important management items. The grouting design and works are sometimes reconsidered depending on the evaluation of grouting effect during the test injection. The purpose of the evaluation of grouting effect is to grasp the range of improvement and consolidation after the injection, and to judge and estimate the strength and permeability of the consolidation part. This paper describes the judgment method of the strength using PS logging results and borehole televiewer (BHTV) logging results. The reflection intensity (Ir) by the BHTV logging increased after the grouting, which showed a same tendency as that using S-wave and P-wave velocities (Vs and Vp) before and after the grouting. This was considered to demonstrate the grouting effect. A relation was obtained between the Vs, Vp and Ir before and after the grouting, which was expressed by following equation. Ir=0.143{times}Vs-70=0.093{times}Vp-110. The relation with the dynamic elastic coefficient (Ed) was also obtained as follow; Ir=0.0013{times}Ed. 9 figs.

  3. Development of novel processes for Cu concentrates without producing sulfuric acid; Hiryusan hasseigata no atarashii doshigen shori gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Awakura, Y.; Hirato, T. [Kyoto University, Kyoto (Japan)

    1997-02-01

    Studies are conducted to develop a new wet method for copper concentrates to replace the conventional dry smelting method for the settlement of problems involving the processing of impurities for environmental protection. A specimen of pyrites polycrystals is subjected to leaching at 80 {degree}C in a strongly acidic cupric solution. Findings are that the element sulfur generated in this process does not impede leaching and only approximately 4% of the sulfur is oxidized into sulfur ions; that the presence of more than 2g/liter of bromide ions produced during bromine-aid leaching of gold changes the structure of sulfur for the inhibition of leaching; that circulation of a bromine-containing leaching liquid is not desired since even a small amount of approximately 0.02mol/liter inhibits the leaching rate. Controlled potential electrolysis is performed for the anode in an acid solution containing CuCl, NaCl, and NaBr, for the observation of oxidation/reduction potentials predicted by Nernst`s equation. It is then disclosed that bromine is more effective than chlorine in gold leaching and that the solution potential during leaching agent regeneration enables the monitoring of solution constitution. 2 refs.

  4. Study on local cooling culture technology of carnation; Kaneshon no kyokusho reibo saibai gijutsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Nakayashiki, Y. [Chugoku Electric Power Co. Inc., Hiroshima (Japan)

    1996-10-25

    Production of high-quality carnation cut flowers is difficult due to growth of weak flower stems in the district along the coast of the Inland Sea of Japan higher in average summer air temperature. The growth promotion effect of carnation by night local cooling was thus tested using midnight electric power. The glass greenhouse of 0.9m wide, 13m long and 0.25m deep was used as culture bed, and in night cooling by spot cooler, the culture bed was covered with PVC curtain for forming a small space. As the test result, high-quality spray carnation flowers with hard flower stem could be reaped from late August by combination of night local cooling and reflective film covering, and extremely high yielding of 92% was also achieved for the second flowers. The running cost of local cooling was estimated to be nearly 18yen/root in 6-ridge/3-root culture, while the facility cost to be nearly 27yen/root. This culture method was estimated to be profitable by adopting high culture density and 3 harvests for a year. 3 refs., 17 figs., 7 tabs.

  5. Study on the advanced orientation control technology of biopolymers; Seitai kobunshi zairyo no kodo haiko hairetsu seigyo gijutsu no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Creation of new functional organic materials for the medical application has been investigated under the microgravity. Facilities of the Japan Microgravity Center were used for this study. For the high-speed synthesis of uniform polymer particles under the microgravity condition for ten seconds, appropriately good results were obtained in the oxidation polymerization of pyrroles. For the synthesis of organic conductive thin films by the electrolytic polymerization, the resistance of electrolyte became larger in the microgravity field. It was required to set conditions so as to enhance the effects of microgravity environment. For the orientation control and thin film formation of proteins, the bacteriorhodopsin was examined. It was found that the microgravity improved the quality of electrocoatings. When the surface tension and viscosity of coating liquid were appropriately controlled under the microgravity, thin films were able to be prepared by utilizing a change from 1g to {mu}g. When the high viscosity fluid is placed in the artificial two-dimensional space composing of two parallel plates, and the low viscosity fluid, such as air, is injected into the above, the interface grows in the finger shaped pattern, namely, viscous fingering. The influence of gravity on this phenomenon was also investigated. 11 refs., 45 figs., 5 tabs.

  6. Advanced technology for environmentally friendly dry battery. Chikyu ni yasashii kandenchi no kaihatsu (kandenchi no musuigin, mu cadmium ka gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    Kawai, O.; Miyasaka, K.; Maeda, M. (Toshiba battery Co. Ltd., Tokyo (Japan))

    1992-04-01

    A dry battery was developed that does not contain mercury and cadmium having been used in carbon-zinc batteries and alkaline batteries. This paper describes its summary. Mercury in carbon-zinc batteries is used as a corrosion inhibitor for zinc, and cadmium is used to retain mechanical strength of zinc cans. Surfactants and metal oxides were used as a corrosion inhibitor in place of mercury, added into separators. Magnesium was adopted to substitute cadmiun, and the required mechanical strength was obtained. Mercury in alkaline batteries prevents corrosion in zinc particles (which generated hydrogen gas) and gas generation from impurities (iron and others), and plays roles of improving contacts among zinc particles and suppressing electric resistance low. Discussions were given on zinc alloy composition and corrosion inhibitors to replace the mercury having these roles. For zinc alloy, an alloy using lead with less gas generation and excellent discharge characteristics and bismuth as an added element was adopted. 3 refs., 9 figs.

  7. Silicone foam molding method for sealing timing belt cover gasket; Timing belt gasket no happo silicone gomu tofu gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, Y.; Kagosaki, T.; Omura, S.; Yamaguchi, H. [Toyota Motor Corp., Aichi (Japan)

    1995-04-20

    An automated assembly of a timing belt cover gasket succeeded by changing a gasket material from molding rubber to silicone foam rubber and making a coating application process with the change. Since a conventional molding rubber gasket was unstable to shape and difficult to integrate in the automation, a method was examined for applying a liquid silicone foam rubber, a building material. A silicone foam rubber as a building material had problems such that reaction was fast after two liquids were mixed, that hardening occurred in the mixed part, and that the viscosity was so low as to make a 3-dimensional application impossible. Consequently, a material was developed for a two-liquid heat setting type that commenced reaction by heating. An application process excellent in quality and yield was completed. In the system containing a device for mixing and discharging two liquids, by enlarging the bore diameter of a discharge nozzle, cutting liquid at the tip end of the nozzle, making a mixer with a small number of revolution and small capacity, using the material in which reaction starting temperature was raised to suppress the reaction inside the mixer, and so on. Thus, the automation was successfully carried out. 16 figs., 1 tab.

  8. Technical survey of the New Earth 21. DNE-21 simulation database; Chikyu saisei keikaku gijutsu chosa. DNE21 simulation database

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report describes calculation codes of DNE-21 which can simulate the optimization model for reducing CO2. The improvement of it is also described. The DNE-21 was modified from the former NE-21. The term was set between 2000 and 2100. Optimization can be conducted across the different time. Non-conventional petroleum was removed from the primary energy. Capacity of nuclear power generation facilities was taken in the model for the optimization. Decision making analysis can be done by considering the uncertainty. In addition, energy saving effect can be incorporated by introducing innovated technologies, and methanol synthesis from CO2 can be treated. For the absorption of CO2 in air by biomass, the absorption amount was assumed to be in proportion to the afforestation area. The afforestation costs were given in individual grades. Furthermore, a carbon circulation model was linked, by which the CO2 concentration in air in the future can be predicted from the artificially emitted CO2 amount. 2 figs.

  9. Effects of peak shaving technologies in the residential and commercial sector; Minsei bumon no fuka heijunka gijutsu no donyu koka

    Energy Technology Data Exchange (ETDEWEB)

    Nagata, Y. [Kyoto University, Kyoto (Japan); Takahashi, M.; Uchiyama, Y. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1997-09-01

    This paper analyzes how much of the power demand could be reduced in the future by improving efficiencies of electric power utilizing appliances used in the residential and commercial sector. It discusses whether the reduction would lead to load leveling. Annual load rate in the power demand is continuing to decrease because of power demand increase in the residential and commercial sector, and increase in demand for air conditioning in summer. If a technology to improve electric appliance efficiency is proliferated to its maximum scope, the annual load rate in fiscal 2014 may be improved by 1.1 percent point. Since the improvement allows new power generation facility installation cost to be deferred, the power generation unit cost can be reduced by 0.11 yen per kwh. If a heat storage type air conditioning technology is proliferated to its maximum scope, the annual load rate in fiscal 2014 can be improved by 1.8 percent point, and the power generation cost may also be reduced. If the device efficiency improving technology and the heat storage type air conditioning technology are introduced to their maximum simultaneously, the annual load rate in fiscal 2014 can be improved by 2.5 percent point, and the power generation cost may also be reduced by 0.24 yen per kwh. If a promotion policy is taken on proliferation of a specific device efficiency improving technology having excellent economic performance by providing subsidy, the reduction amount of cumulative power generation expense will be much greater than the required subsidy amount. 10 refs., 9 figs., 22 tabs.

  10. Fiscal 1994 New Sunshine Program achievement report. Development of photovoltaic power generation system practicalization technology - Research on practicalization of thin-film solar cell manufacturing technology (Technology for higher quality - Development of CuInSe{sub 2} solar cell manufacturing technology); 1994 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu (kohinshitsuka gijutsu (CuInSe{sub 2} taiyo denchi seizo no gijutsu kaihatsu))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The aim is to develop solar cells that exhibit conversion efficiency of 12% in a 10cm times 10cm-large minimodule. When a substrate made of soda lime glass with an SiO{sub 2} coating thereon is used, high reproducibility is achieved in the manufacture of CuInSe{sub 2} (CIS) thin-film solar cells. For the manufacture of a high-quality Cu(InGa)Se{sub 2}(CIGS) light absorbing thin-film layer, it is necessary to develop high-quality precursor film manufacturing and gas phase selenization technologies. A laminated precursor film formed by sputtering is selenized in a H{sub 2}Se gas atmosphere for the formation of CuInSe{sub 2} and CIGS light absorbing thin-film layers, and 16 ZnO/CdS/CIS-structured thin film solar cells built into a 10cm times 10cm-large substrate exhibit conversion efficiency of 11.6%. A CIGS cell using a sulfur-containing Zn compound buffer layer exhibits conversion efficiency of 12.1%. Conditions for the manufacture of a ZnO:Al transparent conductive film are studied. Dependence of CIS-based solar cell output characteristics on temperature and irradiation may be compensated for under the JIS (Japanese Industrial Standard) compensatory formula. The CIS-based thin-film solar cell suffers but a little reduction in output due to temperature rise, and may be therefore said to be excellent. (NEDO)

  11. Development history of coal mine and advanced mining technology; Tanko no rekishi to saitan gijutsu no shinpo

    Energy Technology Data Exchange (ETDEWEB)

    Nohara, H. [Tokyo (Japan)

    2000-04-20

    Japanese coal mine was get a full supply for the construction of the modernize nation in Meiji and the reconstruction of the industry after the second world war. This perfection was completed by the full coal resources and the advanced coal mining technology. But, japanese recent coal seam is too deep for the economical mining. And yet, advanced coal mining technology of japan is necessary for the coal mine of the developing country. (author)

  12. Geotechnology for groundwater and salinisation soil using geophysical prospecting; Butsuri tansa wo mochiita chikasui enrui dojo no tansa gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Chiba, A. [Sumitomo Metal Industries, Ltd., Osaka (Japan); Imaizumi, M.; Takeuchi, M. [National Research Institute of Agricultural Engineering, Tsukuba (Japan)

    1997-12-01

    This paper takes a general view of geophysical prospecting on groundwater and salinisation soil. It also explains the following examples of prospecting: an example of pursuing movement of saline water lump charged with a tracer by using a specific resistance monitor, as a monitoring survey being a representative example of `visualization of movement` expected as a direction to which physical prospecting should proceed in the future, an example of elucidating distribution of soil salts vertically and two-dimensionally by using the electromagnetic exploration method, and an example of surveying distribution of three-dimensional water permeation coefficients by utilizing geophysical prospecting systems, as an example of estimating property values from geophysical prospecting. Electrical prospecting has been used as an exploration method related to groundwater, whereas its method has been increasing the diversity, such as from vertical exploration to high-density horizontal exploration and tomography. Noticeable progress can also be seen in electromagnetic exploration and logging techniques. In addition, what is demanded in application of physical prospecting to groundwater field may include visualization of ground water flow, more precise estimation of hydraulic constants, and complement of their distribution. 22 refs., 21 figs., 3 tabs.

  13. Development of simulation program for analysis of thermoforming process; Sheet jukuseigata process no tame no kaiseki gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Ishida, H.; Kihara, S.; Asano, K.; Ashibe, Y. [Sumitomo Heavy Industries, Ltd., Tokyo (Japan)

    1999-12-20

    Three-dimensional viscoelastic FEM code was developed to simulate thermoforming process of polymer sheet. The integral constitutive equation know as the K-BKZ model, where the stress is considered the integral of the time domain and some functions, is adopted and the model is newly formulated to solid element. Thermoforming process of a traveller's case was simulated. The validity of this method is demonstrated. (author)

  14. High-precision analog circuit technology for power supply integrated circuits; Dengen IC yo koseido anarogu kairo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Nakamori, A.; Suzuki, T.; Mizoe, K. [Fuji Electric Corporate Research and Development,Ltd., Kanagawa (Japan)

    2000-08-10

    With the recent rapid spread of portable electronic appliances, specification requirements such as compact power supply and long operation with batteries have become severer. Power supply ICs (integrated circuits) are required to reduce power consumption in the circuit and perform high-precision control. To meet these requirements, Fuji Electric develops high-precision CMOS (complementary metal-oxide semiconductor) analog technology. This paper describes three analog circuit technologies of a voltage reference, an operational amplifier and a comparator as circuit components particularly important for the precision of power supply ICs. (author)

  15. Batch process. Application of CAE technique to a batch process; Bacchi purosesu eno CAE gijutsu no tenkai

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Y.; Nakai, K.; Oba, S. [Aspentic Japan Co. Ltd. (Japan)

    1997-09-05

    This paper introduces recent topics of the application of the CAE technique to a batch process. A batch distillation modeling tool (BATCHFRAC) is aimed at modeling a distillation tower and a batch reactor for a batch process for fine chemical products, and is provided as an expanded additional function for ASPEN FLUS batch distillation. A batch process designing system (BATCH PLUS) is a comprehensive batch process simulator for efficiently carrying out the designing, the development or the analysis of a complicated recipe-based batch process concerning medical treatment, biotechnology and agriculture. A batch process information control system (Batch/21) is provided as a system having an expanded and additional function for a batch process of InfoPlus/21, an information control system which enables the observation, management and controlling of a process. 4 figs.

  16. Survey on the energy transportation technology for the alternative energies; Sekiyu daitai energy nado no yuso gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    1991-03-01

    Studied is a system in which hydrogen is produced through a water electrolysis process using clean energy from hydro-electric and solar power generations which can be obtained overseas with relative ease and at a low cost and is converted to a transportable chemical medium for transportation to Japan and utilization as energy like electricity, etc. The hydroelectric power generation is the most realistic alternative energy source in terms of energy density, technology and economy. Described here is the feasibility of development of hydroelectric power generation using rivers in Indonesia and Canada. As chemical substances which can be transportable chemical media, methanol/CO cycle (methanol is synthesized from coal gasified CO and electrolytic hydrogen) or liquid hydrogen cycle are the most practical on a short-term basis, and ammonia cycle and cyclohexane cycle are more advantageous than other cycles on a long-term basis. It is essential to reduce a cost of water electrolysis for each chemical substance. Potential needs are great for distribution and utilization of hydrogen energy regenerated from the transportable chemical medium, but it requires a lot of technological innovations regarding the system structure and materials (safety, particularly). 58 refs., 116 figs., 79 tabs.

  17. Engineering technologies for steel structure applied to Trans-Tokyo bay highway project; Tokyowan odan doro ni okeru kokozo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Furumuro, K.; Kobayashi, T.; Kanda, K. [Kawasaki Steel Corp., Tokyo (Japan)

    1996-03-01

    The Trans-Tokyo Bay Highway is a 15.1 km toll road that spans the Tokyo Bay from Kawasaki City in Kanagawa Prefecture to Kisarazu City in Chiba Prefecture by a bridge, an undersea shield tunnel, and two man-made islands. Many new technologies and methods were introduced to construct a large-scale structure safely, rationally, and in a short time on the weak ground under the depth of water in a seismic region such as Tokyo Bay. Kawasaki Steel participated in this project in: (1) development and construction of a revetment structure to which the technology of an oil drilling jacket was applied, (2) design and construction of a large-sized bridge with long-span and multi-span continuous girders on the sea, and (3) design and installation of a mud water treatment module for the shield tunnel constructed on the sea. As a result, the bearing-capacity measurement technology based on the dynamic method of a large diameter steel pipe pile was developed in item (1). The long-term corrosion-proof method using titanium clad steel was developed in item (2), and the way to construct the treatment facilities of approximately 5100 tons in item (3). 3 refs., 12 figs.

  18. Bridge and steel structures. Wind resistant design and vibration control; Kyoryo kokozobutsu. Taifu seishin gijutsu no kojo wo mezashite

    Energy Technology Data Exchange (ETDEWEB)

    Miyazaki, M.; Takeuchi, T.; Saito, Y.; Kazama, K. [Sumitomo Heavy Industries, Ltd., Tokyo (Japan)

    1998-08-20

    This paper describes the wind resistant design and vibration control of bridges. For the long span bridges, vibration by wind is worried due to their flexible structures. Wind tunnel tests are conducted, and the shape of bridges is modified on the basis of the test results. On the other hand, tuned mass dampers (TMDs) are often used during the construction with footing for a short period. For the passive TMD which is a general pendulum type, the number of vibration frequency can be variable by changing the position of spring and damper. The restitutive force can be obtained for the vertical Vibration using lever-type weight damper and spring. For the Active TMD, the weight of lever-type damper is driven by the servo-motor using rack pinion. An optimum regulator is used for the control. Sufficient damping performance was obtained by applying this to the main tower, which depended on the gain and vibration amplitude. An aerodynamic damper is used for the vibration of cables by the wind. Especially, the rain vibration is a problem, which is due to the interaction of rain flow and wind. To solve this problem, a U-engrave cable has been developed for preventing the formation of rainwater flow channels on the cable surface. 9 refs., 14 figs., 5 tabs.

  19. Steel structure (bridge and building); Doboku/kenchiku bun`ya ni okeru yosetsu gijutsu no tenkai

    Energy Technology Data Exchange (ETDEWEB)

    Fukazawa, M. [Yokogawa Bridge Corp., Tokyo (Japan)

    1996-01-05

    In this article, the trends of welding engineering are discussed in two groups, namely bridges and steel frames. First of all, in the field of bridges, as the themes of technical innovation of steel bridges, the challenge to build long span bridges, coping with new structural forms, and rationalization of general bridges are selected. Concerning very long bridges, considerable elongation of its spans and technological development for materials, design, construction and erection relating to improvement of profitability become inevitable. Besides, in addition to the functions of bridges, the bridges playing the roles of environmental and/or artistic structures become many, thereby the cases of using welding for the site joints increase. As the measure for rationalize bridge construction, it is to reduce steel weight and working costs for increasing profitability, and the progress of welding technology therefor has been observed. With regard to the manufacture of bridge portions in a factory, labor saving, automatization and robotization of in-house welding have been made, and bridge maintenance as well as pursuance of attaining the state of maintenance free are also important. The trend that the bridge load is becoming larger and enhancement of earthquake resistance are also important. Regarding steel frames, functionalization of steel, making steel very thick, various automatization of manufacturing, and pursuance of earthquake resistant safety are being made. 14 refs., 7 figs.

  20. `Research and Development of Technology for Controlling the Structure of Multiple-Function Component,` local research and development of important technology for fiscal 1997. 2. Technological development of advanced surface treatment for methane-powered aircraft engine components (Laser-aided advanced treatment system (technology)); 1997 nendo juyo chiiki gijutsu kenkyu kaihatsu `fukugo kino buzai kozo seigyo gijutsu no kenkyu kaihatsu`. 2. Methane nenryo kokukiyo engine buzai no kodo hyomen kako gijutsu kaihatsu (laser oyo senshin kako system gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Surface reforming technologies, such as laser-aided Ti alloying, are studied for developing erosion-resistant materials for the fore section of a methane-fueled aircraft engine. In the formation of intermetallic compound film, the laser plasma hybrid spraying is applied for the formation of a film which is 100-400 times higher than Ti6Al4V in terms of resistance to erosion. For the quantitative evaluation of bond strength, a boundary shear testing jig is built. When the laser irradiating conditions are optimized, the boundary shear strength is elevated to 150-230MPa. NiAl film is studied for realizing resistance to high-temperature oxidation, and then a perfect NiAl film is obtained, which is done by use of a mechanical alloying powder mixed on the atomic level. In the manufacture of ceramic cermet film, a powder is studied, in which powder SiC and Al2O3, excellent in high-temperature oxidation characteristics and fracture toughness, are the parent materials which are coated by NiCr. It is found that an excellent oxidation-resistant film will be manufactured by use of this powder. 40 refs., 132 figs., 12 tabs.

  1. FY 1993 report of the results of the R and D of the important regional technology - Laser application advanced processing system technology. II. R and D of the composite functional member structure control technology (Development of the high grade surface processing technology of methane fueled aircraft use engine members); 1993 nendo juyo chiiki gijutsu kenkyu kaihtsu (fukugo kino buzai kozo seigyo gijutsu no kenkyu kaihatsu (methane nenryo kokukiyo engine buzai no kodo hyomen kako gijutsu kaihatsu). 2. Laser oyo senshin kako system gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    In the fields of aerospace, energy, etc., the development is expected of materials for engine members which are reliable and durable for a long time under the severe environment. Materials are developed which are erosion-resistant under the non-erosion environment of the front of engine of methane fueled aircraft. The basic experiment was commenced on the fabrication of micro-fine surface of Ti-6Al-4V alloys, etc. by superimposed laser beam irradiation. As a technology to fabricate the composite surface layer by supplying alloy components on the material surface, the development was started of a technology to form hard coating by irradiating laser to the Ti alloy surface put with metal elements and compounds on. Literature survey was made of the laser surface reforming technology of Ti alloys, etc. using JOIS. As to the fabrication of the composite surface layer, it was found out that the layer is easy to be brittle together with hardness. In the experiment on the micro-fine surface fabrication, it was found out that as a characteristic of light collector, the integration mirror is flat in strength distribution. Concerning the fabrication of the composite surface layer, it is a must to make it gradient because micro cracks are generated with the rising surface hardness. (NEDO)

  2. Development of low rank coals upgrading and their CWM producing technology; Teihin`itan kaishitsu ni yoru CWM seizo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Sugiyama, T. [Center for Coal Utilization, Japan, Tokyo (Japan); Tsurui, M.; Suto, Y.; Asakura, M. [JGC Corp., Tokyo (Japan); Ogawa, J.; Yui, M.; Takano, S. [Japan COM Co. Ltd., Japan, Tokyo (Japan)

    1996-09-01

    A CWM manufacturing technology was developed by means of upgrading low rank coals. Even though some low rank coals have such advantages as low ash, low sulfur and high volatile matter content, many of them are merely used on a small scale in areas near the mine-mouths because of high moisture content, low calorification and high ignitability. Therefore, discussions were given on a coal fuel manufacturing technology by which coal will be irreversibly dehydrated with as much volatile matters as possible remaining in the coal, and the coal is made high-concentration CWM, thus the coal can be safely transported and stored. The technology uses a method to treat coal with hot water under high pressure and dry it with hot water. The method performs not only removal of water, but also irreversible dehydration without losing volatile matters by decomposing hydrophilic groups on surface and blocking micro pores with volatile matters in the coal (wax and tar). The upgrading effect was verified by processing coals in a pilot plant, which derived greater calorification and higher concentration CWM than with the conventional processes. A CWM combustion test proved lower NOx, lower SOx and higher combustion rate than for bituminous coal. The ash content was also found lower. This process suits a Texaco-type gasification furnace. For a production scale of three million tons a year, the production cost is lower by 2 yen per 10 {sup 3} kcal than for heavy oil with the same sulfur content. 11 figs., 15 tabs.

  3. Development of coal gas production technology acceptable for fuel cells; Nenryo denchiyo sekitan gas seizo gijutsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, T. [Center for Coal Utilization, Japan, Tokyo (Japan); Kimura, N.; Omata, K. [Electric Power Development Co. Ltd., Tokyo (Japan)

    1996-09-01

    In utilizing coal for high-efficiency direct power generation using fuel cells, it is necessary that coal be fed into the fuel cells after having been made into ash-free gaseous fuel. Research and development works are being carried out with an objective to develop a coal gasification furnace most suitable for fuel cells and establish a system to refine coal up to the one that can be fed into fuel cells. Fiscal 1995 has conducted investigations on coal gasification technologies, air separation technologies, and gas refining technologies as the important element technologies, and a trial design on integrated coal gasification fuel cell (IGFC) systems. This paper reports from among the above items the result of the trial design on an IGFC system using molten carbonate fuel cells. The paper describes system comparison on paths of produced gases and anode waste gas, comparison on refining processes using a wet system and a dry system, and parameter studies on oxygen concentration in gasifying agents. It was made clear that the suitable furnace is an oxygen blown coal gasification furnace, and the power generation efficiency at the system terminal can be higher than 53%. 11 figs., 6 tabs.

  4. Separation of unburned carbon from coal fly ash through froth flotation; Sekitanbai no shisshiki datsutanso gijutsu kaihatsu shiken

    Energy Technology Data Exchange (ETDEWEB)

    Miwa, T. [Center for Coal Utilization, Japan, Tokyo (Japan); Murakami, T. [The Coal Mining Research Center, Japan, Tokyo (Japan)

    1996-09-01

    Coal ash tends to become containing more unburned carbon and porous substances depending on conditions of combustion, whose adverse effects to products due to water adsorbability, absorbability and color tones create obstacles in its utilization. Therefore, research and development works have been progressed on wet type carbon removing technology which is characterized in that coal is pulverized to preferable degrees and subjected to flotation. This paper reports the results obtained during fiscal 1995. The results may be summarized as follows: as a result of the comparison test on a column flotation machine and an FW type flotation machine of machine stirring type, the former machine showed better flotation efficiency; several methods were investigated on crushing as a treatment prior to flotation, whereas a mixer with greater circumferential speed and a homo mixer showed the highest efficiency; strength of the impact to the flotation efficiency was found to decrease in the order of pulp concentration > pretreatment time > collector addition ratio; and as a result of the evaluation on refined ash as a cement admixture and carbons as fuel, possibilities were found in them for practical application. 16 figs., 2 tabs.

  5. Research of fluidized bed cement clinker sintering system by pilot plant; Ryudosho cement shosei gijutsu no kaihatsu. 7

    Energy Technology Data Exchange (ETDEWEB)

    Sugiyama, T. [Center for Coal Utilization, Japan, Tokyo (Japan); Sato, N.; Hashimoto, I.; Nakatsuka, M. [The Cement Association of Japan, Tokyo (Japan)

    1996-09-01

    While a cement manufacturing process generally performs sintering by using a rotary kiln, a development work has been carried out as a subsidy operation of the Agency of Natural Resources and Energy on a cement sintering technology using a fluidized bed consisted of two furnaces: a jet flow bed granulating furnace and a fluidized bed sintering furnace. This paper reports the results of tests and researches performed during fiscal 1995. A plant with a scale of 20 ton-a-day production started in 1993 after having gone through bench scale tests. The year 1995 conducted by August its performance evaluation, review of the operation method and the safety criteria, and generalization of the tests. A multi-stage cyclone system has been employed in the preheating equipment for cement material powder. A number of improvements have been realized in the aspects of construction and operation, such as stabilization of dust collecting efficiency by employing a high-efficiency type cyclone, and operation with reduced pressure variation. Based on these results, a construction had been progressed in parallel on a new plant upscaled to 200 ton-a-day production. The new plant was completed in December, 1995. 9 figs., 8 tabs.

  6. Adsorption technology of the earth as 'Steamship'; 'jokisen' chikyugo no kyuchaku gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Hirose, Tsutomu [Kumamoto University, Kumamoto (Japan)

    1999-04-05

    It becomes 2200W of the value equal to the elephant of 4.3 body weight tons, when one of the division into two of energy consumption is made to be the standard metabolism quantity Japanese per capita. They are human and 25 times of the standard metabolism of the almost equal sheep of the body weight. New organism group in which Japanese evolve from the general homeotherm in this point still more is made. What kind of mechanisms is necessary so that 6 billion elephants may gently inhabit the earth? Since the human haughtiness is conspicuous, and the activity of the earth appears a passive too, I do not like the language of being gentle in the earth. However, the ultimate technology which here, it was gentle in the earth was considered. It is the technology that it moves there water circulation atmosphere irrational and is the gentlest in the earth. (NEDO)

  7. Large deployable antenna to be loaded on Engineering Test Satellite-8; Gijutsu shiken eisei VIII gata tosaiyo ogata tenkai antena

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    A large deployable antenna to be loaded on the Engineering Test Satellite-8, which is scheduled to be launched in 2002, is about 19m x 17m, the world largest on-satellite deployable antenna/reflection mirror, with two sets to be loaded for transmission and reception. This antenna is featured by a metallic mesh structure for the reflection surface and by a module structure in which fourteen hexagonal modules are combined comprising the entirety. While a test is conducted using the development model, verification is scheduled on the method of antenna deployment analysis examined so far and on the validity of the method for estimating the shape of the mesh reflection face under zero gravity. The results thus obtained will be reflected on the design of flight articles for which high quality is required. (translated by NEDO)

  8. Treatment wastewater containing dyestuffs by adsorption technology; Kyuchaku gijutsu ni yoru senryo gan`yu haisui no shori

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, H. [University of Osaka Prefecture, Osaka (Japan). Faculty of Engineering

    1997-04-10

    For treatment of wastewater containing dyestuffs, the adsorption/separation recovery method using chitosan fiber was studied. Acid orange as acid dye and brilliant yellow as direct dye were used in experiment, and the pH, inorganic electrolyte and temperature dependency of dye adsorption into chitosan fiber were studied together with the dissolution curve of dyestuffs by NaOH aqueous solution. The result showed the possibility of adsorption, dissolution and concentrating recovery of dyestuffs. This method has the following features: (1) Efficient separation of dyestuffs and water + dyeing auxiliaries from dyeing wastewater, (2) recycling of water and dyeing auxiliaries in dyeing process, (3) high- concentrating recovery of dyestuffs by NaOH aqueous solution and recycling of fibers, (4) separation of dyestuffs from NaOH aqueous solution by cooling and salting out of desorption solution, (5) recycling of NaOH aqueous solution in desorption process, and (6) the possible closed system discharging no new wastewater in wastewater treatment. 7 refs., 6 figs., 1 tab.

  9. Report of high efficiency waste power generation technology development in 1995; Kokoritsu haikibutsu hatsuden gijutsu kaihatsu (1995 nendo hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    High temperature and high pressure steam has been investigated for the high efficiency waste power generation technology development. The steam temperature below 300 centigrade is currently employed to avoid the corrosion of superheater, and the generating efficiency is less than 15%. Practical application of 500 centigrade and 100 kg/cm{sup 2} is planned by developing corrosion resistance materials. Environmental load reduction technology has been also developed. For the external circulation type fluidized bed furnace combustion tests using dummy waste in fiscal 1995, the temperature control at bag filter was effective for suppressing the dioxins. When using waste plastics, HCl could be reduced by blowing Ca compounds. Various Cr-Ni-Mo-based alloys have been developed as a corrosion resistance superheater tube material, and are currently tested. For the environmental load reduction technology, the development of pulse plasma exhaust gas treatment method has been continued from fiscal 1993. In fiscal 1995, this method was confirmed using a small-scale test unit, and also tested using a 5000 Nm{sup 3}/h bench-scale unit. The removal rates of dioxins at the outlet of bag filter were 99.8% and 99.3%, respectively. They were found to be affected greatly by the pulse waveform. 13 refs., 107 figs., 24 tabs.

  10. Dream of future on human-machine cooperative system; Ningen robot system ni okeru fluid power gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, Y. [Hosei University, Tokyo (Japan). Faculty of Engineering

    2000-01-15

    This paper describes the human-machine cooperative system and fluid power technology. Most of Japanese robot R and D activities shifted from early R and D on hydraulic or pneumatic driving to that on simple electric driving, and development of fluid power technology as actuator and control technology is retarded. For creating an artificial work environment with a presence by virtual reality formation technology, an equipment (actuator) directly acting such five senses (sensor) of operators as visual, auditory, pressure and contact senses is essential. Pneumatic actuator is extremely suitable for such one because of its small size, light weight, safety and high power density. Robocup has been held as the soccer game of many autonomous robots. For the soccer game of human beings and robots, development of such technologies for advanced autonomous robots is necessary as realtime processing, advanced intelligence, human friendliness, safety, high-efficiency high-power actuator equivalent to human muscle, and energy source. (NEDO)

  11. Noise and vibration reduction technology in hybrid vehicle development; Hybrid sha kaihatsu ni okeru shindo soon teigen gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Yoshioa, T.; Sugita, H. [Toyota Motor Corp., Aichi (Japan)

    2000-03-01

    Accomplishing both environmental protection and good NVH performance has become a significant task in automotive development The first-in-the-world hybrid passenger car of mass production. 'Prius', has achieved superior NV performance compared with conventional vehicles with a 1.5-liter engine along with 50% reduction of fuel consumption and CO{sub 2} emissions. low HC, CO and NO{sub x} emissions. This paper describes NV reduction technology for solving problems peculiar to the hybrid vehicle such as engine start/stop vibration, drone noise at low engine speed and motor/generator noise and vibration. It also mentions application technology of low rolling resistance tires with light weight wheels and recycled material for sound proofing. (author)

  12. Further advancement of chassis-dynamometer measurement and control technology; Kodoka suru chassis dinamo keisoku seigyo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Y. [Meidensha Corp., Tokyo (Japan)

    1999-03-01

    A new chassis-dynamometer was developed and put into the practical use in 1992. Currently this chassis-dynamometer, in which rollers are mounted on the AC-dynamometer shaft end, is being used in the majority of passenger car testing application. This paper present bow the associated measurement and control technology was upgraded and discusses the future trend in this field. (author)

  13. Development of novel processes for Cu concentrates without producing sulfuric acid; Hiryusan hasseigata no atarashii doshigen shori gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, T.; Noguchi, F.; Takasu, T.; Ito, H. [Kyushu Inst. of Technology, Kitakyushu (Japan). Faculty of Engineering

    1997-02-01

    In the refining process for the production of copper from pyrites, heat treatment is carried out in a neutral atmosphere so that part of the sulphur will be collected in the form of simple sulfur and that pyrites naturally low in reactivity will be made active. A basic study is also conducted of a very high speed electrolytic method. The chemical aspects of pyrites which are various in composition (mainly CuFeS2) are clarified by X-ray diffraction, and then is subjected to heat-treatment in a 773K-1073K argon atmosphere. There is a decrease in the amount of sulfur at a temperatures not lower than 973K. The X-ray main diffraction line splits for the emergence of some lower angle diffraction lines. The specimen is then subjected to a leach test in a copper chloride base liquor, to disclose that leachability grows remarkably higher in the presence of a great change in the X-ray diffraction lattice constant. An experiment follows in which an electrolyte is allowed to flow at a high speed for accelerating the rate of electrolytic refining in an effort to prevent the passivation of anode and deposition of dendrite on the cathode that is apt to occur when the current density is high. Passivation is prevented when the flow rate is 10m/min or higher in the vicinity of the anode surface for the formation of a smooth electrodeposited surface. 2 refs., 2 figs., 2 tabs.

  14. Aspirin content determination with control systems by image processing technology. Gazo shori gijutsu wo katsuyoshita jozai aspirin kensa sochi

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, K. (Lion Corp., Tokyo (Japan))

    1990-08-05

    An inspection apparatus for aspirin tablets utilizing image processing technology was developed. One side of a tablet consists of aspirin layer and another side consists of alkiline layer. The alkaline layer is opaque at all but the aspirin layer is translucent. Image of overall configuration of the tablet is taken in CCD camera by illumination from all surrounding sides. The area is measured by using these images. Then, when switching off the surrounding illumination and illuminating the aspirin side, only aspirin side layer shines. The area is determined by taking the image in CCD. Aspirin content is calculated by the ratio of overall images to aspirin image and the predetermined tablet weight. Tablets of different aspirin content were prepared, and the content determined by this method and the chemically determined contents were compared. High correlation was found between both contents, indicating the validity of the image processing method. When the aspirin content is out of 330 {plus minus} 10mg, the controlling mechanism works, by which unmanned operation will be possible. 8 figs.

  15. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the technology of accelerated formation of bio-functions (R and D of the technology of creation of novel advanced enzymes); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kasokugata seibutsu kino kochiku gijutsu no kenkyu kaihatsu (shingata kokino koso sosei gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes R and D on creation technique of novel advanced enzymes. In fiscal 1997, a novel mutagenesis technique was developed to obtain more kinds of mutational genes by shuffling between clonal genes as compared with the previous homogeneous recombination. A genotype- and phenotype-linking technology was developed by expressing random motifs (peptide as components of the active site of protein) on bacteria, and by developing a single-motif protein library. Study was made on a selection system for functional molecules of catalytic activities in a gene level, and a selection system for function of signal transduction. Analysis and evaluation study on vitro experimental technology can be efficiently promoted by recognizing the fitness landscape of target protein molecules. As a result, instead of the conventional method which needs several cycles of mutation and screening of 3-4 week/cycle, an efficient method possible to obtain multiple mutants was established. Research work was also promoted by various organizations to develop an accelerated formation technology of bio-functions. 68 refs., 51 figs., 14 tabs.

  16. Heat generated by power cables in utility tunnels. Dodonai denryoku cable no ondo yosoku gijutsu no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Ota, K.; Inoue, M.; Takagi, K.; Karikomi, M. (Kajima Corp., Tokyo (Japan))

    1993-10-31

    In order to investigate the method of expelling the heat generated by the power cable in the utility tunnel, the numerical analysis of model experiment on the heat transfer by natural convection and by radiation was carried out. As the thermal flow from the power cable is positioned in the transition region in the high Rayleigh region where the change takes place from laminar flow to turbid flow, the calculation results may be not always accurate. The visualization of thermal flow using the heat-sensitive liquid crystal was tested to be compared with the calculation results from the generalized simplified marker and cell method (GSMAC) which made it possible to shorten the calculation time. For the analysis of heat transfer by radiation, the radiation energy absorption distribution (READ) method which required short calculation time was employed. The results were as follows: The GSMAC finite element method could be employed in the analysis of this region of natural convention heat transfer. For the visualization of the thermal convection, the microcapsule thermo-sensitive liquid crystal was effective. For the radiation heat transfer analysis of narrow band radiation, the READ was suitable as it gave accurate results within a short period of time. In the construction design, it is important to enhance the radiation between the cable and the wall by separating the power cable. 9 refs., 14 figs., 3 tabs.

  17. Floor-supply displacement air-conditioning system; Zenmen yuka fukidashi kucho system ni kansuru gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Takebayashi, Y.; Nobe, T. [Shimizu Corp., Tokyo (Japan); Hatanaka, H. [Nitto Boseki Co. Ltd., Tokyo (Japan); Tanabe, S. [Waseda University, Tokyo (Japan)

    1999-11-05

    This development is proposing an alternative air-conditioning method, 'floor-supply displacement air-conditioning system'. The idea comes from the principle of displacement ventilation originally, using breathable carpet tiles laid over a perforated raised floor system. In this system, fresh cool or heated air are supplied at very low velocity throughout the carpet tiles. This system has been applied to 25 buildings and total floor area reached 10,000m{sup 2}. (author)

  18. Research and development of jellyfish compaction technology; Kurage gen'yoka shori gijutsu ni kansuru kaihatsu kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Uemura, N. [Kansai Electric Power Co. Inc., Osaka (Japan)

    1999-12-10

    An on-site test is conducted of devices for reducing in a short time the volume of jellyfish that flow into power plants. There are three methods to reduce the volume of jellyfish by separating water from them, which are heating, pressing, and chemical. The chemical treatment is not an object of this test because it is expected that the volume reduction rate by this method will be too low. For the achievement of a reduction rate of 80%, the two methods, physical and crushing, are compared at the laboratory level. It is found that the crushing method is superior because it can dispose of jellyfish in a shorter time. Using this method, the crushed jellyfish is separated into drain and bubbles, the latter containing jellyfish fragments. An on-site test is conducted using a general-purpose crusher. The relationship between the filter diameter (1-5mm) and the separation rate is investigated, and it is found that separation proceeds more rapidly when the filter diameter is smaller. It is found that the addition of a certain chemical accelerates the separation. COD (chemical oxygen demand) is 300-490mg/l in the drain, and BOD (biological oxygen demand) 400-500mg/l, with COD having increased by approximately 20%. A study is scheduled to be conducted using an experimental apparatus. (NEDO)

  19. Fiscal 1997 R and D project on industrial science and technology under a consignment form NEDO. R and D of the technology of accelerated formation of bio-functions; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kasokugata seibutsu kino kochiku gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As a part of the study on accelerated formation of bio- functions, analysis technology of experimental systems for in vitro evolution of protein molecules was studied. For the analysis, recognition of a fitness landscape is indispensable. Improvement of adaptive walk is possible through its analysis in an ordered space based on features of the landscape. By the last fiscal year, the knowledge of the fitness (heat-stability) landscape was obtained in the experimental system of PEP (prolyl endopeptidase) in which an adaptive walk mechanism was found to function effectively (mutated protein with a heat-stability effectively improved by adaptive walk was obtained). To obtain more general fitness landscape information, landscapes of various proteins to a fitness should be examined, and the effectiveness of approaches to efficient adaptive walk on the fitness other than a heat-stability should be clarified. The second experimental system using LOD (lactate oxidase) was thus constructed to examine the heat-stability landscape. In addition, the system of in vitro molecular evolution of proteinase inhibitor (Cystatin B) was constructed. 3 refs., 3 figs., 2 tabs.

  20. Development of practical application technology for photovoltaic power generation systems in fiscal 1997. Development of technologies to manufacture thin film solar cells, development of technologies to manufacture low-cost large-area modules (dissolution and deposition process); 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu. Usumaku taiyo denchi no seizo gijutsu kaihatsu, tei cost daimenseki module seizo gijutsu kaihatsu (yokai sekishutsuho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Research and development was performed by noticing on the plasma spraying method as a process that can manufacture thin poly-crystalline silicon films at a high speed. Fiscal 1997 has established a technology that can form a silicon film directly without using seed crystals in an area of 2-cm square on a carbon supported substrate by using a small film manufacturing equipment using the dissolution and deposition process. The size of the crystal is as very large as several hundred {mu}m, by which a possibility of making high-performance solar cells was verified. Discussions were given to apply this technology to large-area substrates, whereas a device was developed, which is capable of forming a film in an area corresponding to 10-cm square. According to a film forming experiment using this device, the film has begun being formed on part of a 10-cm square substrate, verifying the effectiveness of this method. While the film thickness is about 100 {mu}m, it was confirmed that the crystal size will not change even if the thickness is made mechanically as thin as about 50 {mu}m. Further discussions were given on enhancement of wettability by means of coating, and light enclosing structure. (NEDO)

  1. Fiscal 1996 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials; 1996 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Technologies were described of creating original high-functional materials. The paper presented the following two as fields of technology on which importance is to be placed for the future R and D from technological and socioeconomic points of view. In the field of new materials of living organism imitation type, remarkably high-performance/high-functional new materials are invented by imitating the precise function manifestation mechanism of the ultimate living organism in which a great variety of matters are in harmony with each other and manifest complicated and high-level functions. In the field of structural control/synthesis process technology, the paper is aimed at manifestation of newer and higher functions/performance and innovation of the synthesis process, and also at developing technology to precisely control structure and process of materials including surface and interface in correspondence with atomic/molecular to macro levels. Up to the present, conducted were an examination of autonomous response materials (the subtheme is a R and D of polymer/composite multi-stimuli-responsive materials) and a R and D of precise polymerization (control) polymer materials. 239 refs., 129 figs., 49 tabs.

  2. Fiscal 1997 report under consignment from NEDO on photon measuring/processing technology (development of power generation facility use high-function maintenance technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku photon keisoku kako gijutsu (hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A research/development was conducted on technologies of photon applied measuring/photon applied processing/photon generation which are usable for heightening of reliability and maintenance efficiency of power generation facilities. In fiscal 1997, high melting-point metal particles were manufactured by high energy density laser for formation of high temperature and stabilized fine functional circuit. Further, a wavelength changeable ultra red laser light source was studied which can make in-situ measurement of gas concentration and components. A study was also made to examine the surface composition by measuring fluorescent X-rays emitted by radiating high intensity laser beam on the surface of material. A rod type and a slab type as a high-output complete-solidified laser are under development. There is also a development aiming at high speed/high quality photon processing such as high speed/high precision welding/cutting and laser joining. Besides, a study is being made of high energy pulse/high quality beam complete-solidified laser. The paper made a comprehensive survey of the trend of the photon measuring/monitoring technology, and made a systematical arrangement of the developmental subjects extracted. 142 refs., 357 figs., 62 tabs.

  3. Fiscal 1996 R and D under a consignment from NEDO of environmental technology such as recycling. 2. Automobile running sound reduction technology (for public); 1996 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (recycle nado kankyo gijutsu kenkyu kaihatsu). 2. Jidosha sokoon teigen gijutsu (seika hokokusho (kokaiyo ))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Tire/road noise and the running performance were studied. Test were conducted using drum testing machine. If kinds and frequencies of tires are different, noise radiation characteristics are also different, and the degree of the difference are more remarkable in tires of passenger cars than those of large sized cars. There is also observed special frequency noise caused by natural vibration of tires. Noise increases when there are translots in tires, it decreases when having the translots had angles. In hydroplaning, tires which had translots installed inclinedly generate less noise. The sound absorbing rate of the pavement using dense particle asphalt-concrete mixture is low, below 0.2, but the drainage type pavement (three kinds) showed high sound absorbing rates (0.4-0.7) in each kind. Noise reduction by the drainage type pavement was seen also in the engine type noise. Further, prediction of noise propagation was possible to a certain extent using the Allard model. As to lock braking force coefficients on the wet road, there are no definite differences between roads in terms of passenger cars, but the coefficients are higher in the drainage type pavement than that using the dense particle asphalt-concrete mixture in terms of large sized cars. On the dry road, those in the use of dense particle asphalt-concrete mixture are the highest. 3 refs., 96 figs., 11 tabs.

  4. `Technology for Advanced Treatment of High Melting Point Metal-Based Material,` local research and development of important technology for fiscal 1997. Development of materials creation technology for high efficiency power generator components; 1997 nendo juyo chiiki gijutsu kenkyu kaihatsu. `Koyuten kinzokukei buzai no kodo kako gijutsu` (kokoritsu hatsuden`yo buzai sosei gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Efforts are made for the creation of high melting point metal-base materials to replace the currently-used Ni-base superalloys for the turbine to withstand higher operating temperatures. The main efforts made in fiscal 1997 are outlined. As in fiscal 1996, Nb-base solution alloys, in which solution reinforcement elements such as Mo and W are alloyed, are manufactured by button arc melting and tested for mechanical properties and texture/characteristics. In the designing and evaluation for a strongest Nb-base composite material, Nb-base composite materials are manufactured by use of particle dispersion-strengthening attained by addition of intermetallic compounds or elements to contribute to the formation of oxides, carbides, or nitrides. Nb-base composite materials may also be manufactured by use of eutectic-strengthening attained by utilizing crystallization in the process of coagulation. The resultant Nb-base composite materials are evaluated for their dynamic characteristics at high temperatures. In the development and evaluation of technologies for creating Nb-base materials for high-temperature components, larger specimens as heavy as several kg are tested in line with small specimens for basic studies, and the results are utilized for alloy designing for high-temperature materials. 50 refs., 97 figs., 15 tabs.

  5. Report on the results of the fiscal 1997 R and D under consignment from NEDO of photon measuring/processing technology (development of high-efficiency production process technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku photon keisoku kako gijutsu (kokoritsu seisan process gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Development is made of high energy-efficiency laser processing technology and high efficiency/high grade photon generation/control technology as laser light source, for the purpose of energy conservation/efficiency heightening of production processes which require a large amount of energy such as welding, joining, surface treatment, and particle fabrication. As to keyhole dynamics of the molten metal generated on the laser weld, construction of simulational mathematical models was started. Equipment to fabricate semiconductor ultrafine particles which become the core of quantum dot functional structures was designed to fabricate particles. In-situ optical measuring technology was studied of element/size of particles of below 30 nm in size by emission spectroscopy associated with the plasma irradiation. As tightly focusing all-solid-state laser technology, studied was the wavelength conversion method in which harmonics are generated four times as much as the fundamental wave due to high efficient generation of high power UV laser. Also studied were high laser strength, low optical losses, conditions for fostering high homogenity crystals. Technology for high accuracy processing of element surface was established. High efficiency photon generation technology was comprehensively investigated. 140 refs., 276 figs., 46 tabs.

  6. Fiscal 1997 research report on the R and D project under a consignment from NEDO. Photonics engineering (R and D of photonics measuring/processing technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Photon keisoku kako gijutsu (photon keisoku kako gijutsu no kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Survey was made on the trend of R and D on photonics engineering to clarify the direction of its impact and ripple effect on industrial fields. Reduction of environment burden, improvement of the productivity and reliability of products, and creation of new industries by novel creative R and D are necessary simultaneously. For reconsideration of the previous measurement and machining technologies in a manufacturing industry, use of photon (laser) beams is promising. As photonics engineering, photonics measurement and machining, and elemental and peripheral technologies for generation and control of photon were surveyed. Photonics application technologies for medical care and diagnosis, communication and transmission, entertainment, and chemical fields were also surveyed. In fiscal 1997 as the first year of this project, based on the results obtained in leading researches conducted until fiscal 1996, some technological issues were clarified through the survey on the latest trend of photonics engineering in measurement, machining and generation fields, and its feasibility in the other fields. 265 refs., 91 figs., 10 tabs.

  7. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the environment friendly type production technology. High-functional chemical synthesis bioreactor (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kankyo chowagata seisan gijutsu (kokino kagaku gosei bioreactor) kenkyu kaihatsu seika hokokusho (kokaiyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of developing production technology of chemical substances which are resource conservative, energy saving and less in environmental loads, a R and D was conducted of a high-functional chemical synthesis bioreactor. The paper reported the results of fiscal 1996. As for proliferation control breeding technology, relating to the switch control technology of proliferation related genes by regulatory factors, the effectiveness on an incubator level was demonstrated, and at the same time improvement of reactor performance in using this technology was studied on paper. As to the manifestation control breeding technology, the actual design of the development of manifestation promotion technology by bent DNA, etc. was proceeded with, and at the same time the following were commenced: selection of bent DNA, confirmation of bent characteristics, and work of vector construction using candidate bent DNA. Further, the simple assessment system of manifestation vectors was constructed. In the development of bioreactor system technology, the actual design was started of the two-stage culture continuance system which separated proliferation and enzyme production. 48 refs., 41 figs., 6 tabs.

  8. Report on the results of the fiscal 1997 R and D under consignment from NEDO of photon measuring/processing technology (R and D of petroleum production system high-grade measuring/processing technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku photon keisoku kako gijutsu (sekiyu seisan system kodo keisoku kako gijutsu kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The R and D were conducted of high-strength and high-accuracy welding/joining technology using laser, technology to measure and assess the joining state of structures and defects around the surface of structures and inside structures by high accuracy and high resolution, and technology/equipment to generate a laser light source for the tool, which are all required to remarkably enhance safety/reliability of oil drilling facilities working in the severe environment. In fiscal 1997, as the R and D of oil production system high-grade measuring/processing technology, technical study, study of measures to be taken, operating experiment, assessment, examination, etc. were conducted on the following themes: 1) macroscopic processing technology (R and D of high-reliability laser welding technology), 2) non-destructive composition measuring technology (R and D of internal measurement and photoelectron spectroscopy using short-wavelength radiation), 3) tight-focusing all-solid-state laser technology (R and D of fiber laser), 4) tight-focusing all-solid-state laser technology (R and D of high-efficiency laser diode), and 5) comprehensive investigation of phonics engineering (investigation for photon-applied materials processing technology). 256 refs., 205 figs., 18 tabs.

  9. Fiscal 1997 report of the verification research on geothermal prospecting technology. Theme 5-2. Development of a reservoir change prospecting method (reservoir change prediction technique (modeling support technique)); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. 5-2. Choryuso hendo tansaho kaihatsu (choryuso hendo yosoku gijutsu (modeling shien gijutsu)) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To evaluate geothermal reservoirs in the initial stage of development, to keep stable output in service operation, and to develop a technology effective for extraction from peripheral reservoirs, study was made on a reservoir variation prediction technique, in particular, a modeling support technique. This paper describes the result in fiscal 1997. Underground temperature estimation technique using homogenization temperatures of fluid inclusions among core fault system measurement systems was applied to Wasabizawa field. The effect of stretching is important to estimate reservoir temperatures, and use of a minimum homogenization temperature of fluid inclusions in quartz was suitable. Even in the case of no quartz in hydrothermal veins, measured data of quartz (secondary fluid inclusion) in parent rocks adjacent to hydrothermal veins well agreed with measured temperature data. The developmental possibility of a new modeling support technique was confirmed enough through collection of documents and information. Based on the result, measurement equipment suitable for R and D was selected, and a measurement system was established through preliminary experiments. 39 refs., 35 figs., 6 tabs.

  10. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the environment friendly type production technology. High-functional chemical synthesis bioreactor (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kankyo chowagata seisan gijutsu (kokino kagaku gosei bioreactor) kenkyu kaihatsu seika hokokusho (kokaiyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of developing production technology of chemical substances which are resource conservative, energy saving and less in environmental loads, a R and D was conducted of a high-functional chemical synthesis bioreactor. The paper reported the results of fiscal 1996. As for proliferation control breeding technology, relating to the switch control technology of proliferation related genes by regulatory factors, the effectiveness on an incubator level was demonstrated, and at the same time improvement of reactor performance in using this technology was studied on paper. As to the manifestation control breeding technology, the actual design of the development of manifestation promotion technology by bent DNA, etc. was proceeded with, and at the same time the following were commenced: selection of bent DNA, confirmation of bent characteristics, and work of vector construction using candidate bent DNA. Further, the simple assessment system of manifestation vectors was constructed. In the development of bioreactor system technology, the actual design was started of the two-stage culture continuance system which separated proliferation and enzyme production. 48 refs., 41 figs., 6 tabs.

  11. Research on fabrication technology for thin film solar cells for practical use. Technological development for qualitative improvement (CuInSe2 based PV cell); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Kohinshitsuka gijutsu (CuInSe2 taiyo denchi seizo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on the fabrication technology of CuInSe2 based PV cell in fiscal 1994. (1) On formation of high-quality CIGS thin films by bilayer method, Mo film was deposited on a glass substrate by sputtering, and CIGS film with different Ga/In ratios was next formed on the substrate by quaternary simultaneous deposition at different In and Ga deposition speeds. In addition, CdS film was deposited on the CIGS film, and ZnO and ITO films were finally deposited on it by sputtering to complete solar cell. This solar cell offered the maximum conversion efficiency among cells using CIGS film. (2) On formation of high-quality CIGS thin films by three-stage method, a certain correlation was found between substrate temperature and CIGS film composition by monitoring substrate temperature in film forming process. This phenomenon allowed rigorous control of CIS film compositions important for CIS thin film solar cells. (3) On low-cost process technology for thin film formation, Cu(In,Ga)S2 solid solution film was fabricated by expanded selenic process. 3 figs.

  12. Research on fabrication technology for thin film solar cells for practical use. Research on low-cost fabrication technology for large-area modules (CdS/CdTe solar cell modules); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Daimenseki module no tei cost seizo gijutsu (CdTe taiyo denchi module seizo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on the fabrication technology of CdS/CdTe solar cell modules in fiscal 1994. (1) On the fabrication technology for high-efficiency large-area solar cells, high-quality CdTe active layer was studied. S content taken in the active layer at sintering of CdTe decreased with an increase in formed CdTe, resulting in improvement of Voc of cells. (2) On the window layer with wide band gap, the solar cell superior in collection efficiency and photoelectric characteristics could be obtained using the newly developed mixed crystal film of Cd(1-x)Zn(x)S. (3) On the forming technology of large-area coating/sintering films, improvement of CdS film quality was studied by pressurized processing of printed CdS films. As a result, improvement of film density and light transmissivity was confirmed. (4) On the leveling process technology of CdTe films, smooth surface films were obtained by experiment using an equipment simultaneously exciting samples in all directions as one of uniform coating methods of films. 7 figs.

  13. Research on fabrication technology for thin film solar cells for practical use. Technological development for qualitative improvement (development of fabrication technology of thin film polycrystalline Si solar cell); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Kohinshitsuka gijutsu (usumaku takessho silicon kei taiyo denchi seizo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on the fabrication technology of thin film polycrystalline Si solar cells in fiscal 1994. (1) On the fabrication technology of high-quality Si thin films, the new equipment was studied which allows uniform stable melting recrystallization over a large area. The new equipment adopted a heating method based on RTP system, and is now under adjustment. (2) On the fabrication technology of light/carrier confinement structure, degradation of hydrogen-treated thin film Si solar cells by light irradiation was examined. As a result, since any characteristic degradation was not found even by long time light irradiation, the high quality of the cells was confirmed regardless of hydrogen-treatment. Fabrication of stable reproducible fine texture structure became possible by using fabrication technology of light confinement structure by texture treatment of cell surfaces. (3) On low-cost process technology, design by VEST process, estimation of cell characteristics by simulation, and characteristics of prototype cells were reported. 33 figs., 1 tab.

  14. Technological development for super-high efficiency solar cells. Technological development for super-high efficiency singlecrystalline silicon solar cells (super-high efficiency singlecrystalline Si solar cells); Chokokoritsu taiyo denchi no gijutsu kaihatsu. Chokokoritsu tankessho silicon taiyo denchi no gijutsu kaihatsu (chokokoritsu tankessho silicon taiyo denchi cell no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on technological development of super-high efficiency singlecrystalline silicon solar cells in fiscal 1994. (1) On development of high-performance light receiving layer, the fine electrode for receiving surfaces was designed to reduce serial resistance, and the high-quality oxide passivation film was studied to reduce surface recombination velocity. (2) On development of forming technology of back heterojunction, the high-quality cell with B-doped fine crystalline Si film on its back was studied by heat treatment of the fine crystalline Si film, and the cell structure with high back reflectance of light was also studied. (3) On analysis for high-efficiency cells, the relation between the back recombination velocity at the interface between p-type substrate and back passivation film, and the internal collection efficiency as probe light was injected from the back, was calculated by numerical simulation. As a result, the cell back recombination velocity could be evaluated by measuring the spectral internal collection efficiency to back injection. 15 figs., 6 tabs.

  15. Technological development for super-high efficiency solar cells. Technological development for crystalline compound solar cells (high-efficiency III-V tandem solar cells); Chokokoritsu taiyo denchi no gijutsu kaihatsu. Kessho kagobutsu taiyo denchi no gijutsu kaihatsu (III-V zoku kagobutsu handotai taiyo denchi no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on technological development of III-V compound semiconductor solar cells in fiscal 1994. (1) On development of epitaxial growth technology of lattice mismatching systems, the optimum structure of InGaAs strain intermediate layers was studied for reducing a dislocation density by lattice mismatching of GaAs layer grown on Si substrate and difference in thermal expansion coefficient. The effect of strain layer on dislocation reduction was found only at 250dyne/cm in strain energy. Growth of GaAs layers on the Si substrate treated by hydrofluoric acid at low temperature was attempted by MBE method. As a dislocation distribution was controlled by laying different atoms at hetero-interface, the dislocation density of growing layer surfaces decreased by concentration of dislocation at hetero-interface. (2) On development of high-efficiency tandem cell structure, tunnel junction characteristics, cell formation process and optimum design method of lattice matching tandem cells were studied, while thin film cell formation was basically studied for lattice mismatching tandem cells. 45 figs., 8 tabs.

  16. Research on fabrication technology for thin film solar cells for practical use. Research on low-cost fabrication technology for large-area modules (production technology for amorphous silicon solar cell modules); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Daimenseki module no tei cost seizo gijutsu (amorphous taiyo denchi module seizo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on the fabrication technology of amorphous Si solar cell modules in fiscal 1994. (1) On process technology for prototype film substrate solar cells, an advanced preprocessing equipment for film substrates, stepping roll type film forming technology, and prototype submodules were studied. A conversion efficiency of 7.2% was achieved by use of the submodule formed in an effective region of 40 {times} 40cm{sup 2}. (2) On efficiency improvement technology for film substrate solar cells, p/i and n/i interfaces, forming condition for Ag film electrodes, film thickness of transparent electrode ITO, and optimum transmissivity were studied. (3) On technology for advanced solar cells, high-quality a-SiGe: H film, ion control in plasma CVD, and a-Si film formation by plasma CVD using SiH2Cl2 were studied as production technology of narrow gap materials. (4) On advanced two-layer tandem solar cells, the defect density in optical degradation of a-Si cells by reverse bias dark current was evaluated, and outdoor exposure data were analyzed. 4 figs., 1 tab.

  17. Research and development of utilization technology of solar thermal system for industrial and other use. Research and development of key technology (energy conversion on technology using chemical reactions); Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Yoso gijutsu no kenkyu (kagaku energy henkan gijutsu no kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    Takita, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for energy conversion technology using chemical reactions by the aid of solar energy. The demonstration runs were conducted by a bench-scale unit, which was operated stably for 100h, to produce promising results. The catalyst exhibits stable performance, without showing a sign of deactivation. It is found that the heat pump system works well, without being interfered with accumulated by-products. A heat of approximately 2,100kcal/h is recovered. It is confirmed that steam of 150{degree}C and 200{degree}C is generated from hot water of 80{degree}C and 95{degree}C, respectively. The bench-scale runs show a thermal efficiency of around 10%, which is lower than the target level. However, the runs with hydrogen-occluding alloy attain a process thermal efficiency of 30%. The system in which solar collector and chemical heat pump units are combined is evaluated with respect to its economic efficiency and operability for its eventual commercialization. 6 figs., 2 tabs.

  18. Research on fabrication technology for thin film solar cells for practical use. Technological development for qualitative improvement (improvement of conversion efficiency of amorphous silicon solar cells after degradation); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Kohinshitsuka gijutsu (amorphous taiyo denchi no shoki rekkago koritsu kojo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on technological development for qualitative improvement of a-Si solar cells after initial degradation in fiscal 1994. On the fabrication technology of light-stable a-Si films, the film formation method possible to control combined hydrogen by repetitive formation/treatment was developed. The obtained high-quality light-stable a-Si film was featured by low defect density in a wide optical band gap range, and defect density of nearly 3 {times} 10{sup 16}/cm{sup -3} after light irradiation. The light degradation rate of the cell where the a-Si film was applied to i layer was relatively stable by 10% or less. The a-Si/a-Si double-layer tandem cell fabricated by this technology produced a high conversion efficiency of 10.5%. By applying {mu}c-Si material to photoactive layer as narrow band gap material, the cell with optical sensitivity even in long wavelength ranges more than 1000nm was obtained. The a-Si/{mu}c-Si double-layer tandem cell produced an initial efficiency of 8.0% and an efficiency after degradation of 7.5%. 12 figs., 3 tabs.

  19. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in Thailand; Kankyo chowagata sekitan riyo system kanosei chosa. Tai ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper investigated and studied the present situation and future trend of coal utilization and distribution in Thailand, and the present situation of environmental effects and the measures taken for environmental protection. Around 2010, coal will probably be produced only at EGAT`s Mae Moh (MM) coal mine. Demand for overseas coal is expected to be 40-50 million tons in 2011, and preparation of the coal center becomes a subject. For general industry use coal, pretreatment such as coal preparation, coal blending and briquetting is needed, considering coal quality, usage, transport distance and environmental effects. Brown coal of MM coal mine is a lignite with high sulfur, high ash content and low heating value. Wide spread of its use can be expected if upgrading is possible such as desulfurization, deashing, increasing heating value. In the electric power generation field, the absorber was installed at the existing boiler of the mine-mouth generating plant to conduct a verification test on high grade desulfurization of ultra-high sulfur lignite. In the industry field, the circulating fluidized bed boiler was adopted. In the residential/commercial field, introduction of briquette was proposed. 80 refs., 84 tabs.

  20. Aspiration toward geothermal energy utilization in regional development plan. Part 6. ; Hydrothermal fluid utilization business in Matsuo-mura of Iwate prefecture. Chiiki keikaku ni okeru 'chinetsu riyo' eno hofu. 6. ; Iwateken Matsuomura no chinetsu nessui riyo jigyo

    Energy Technology Data Exchange (ETDEWEB)

    Otobe, Y.; Furutate, E.

    1992-10-31

    Twenty six years have passed since the first geothermal power station was constructed in Matsuo-mura of Iwate Prefecture, Japan. This paper describes the history, the present situation and the future conception of the geothermal energy utilization in this village. This village includes Hachimantai of a vantage ground in the center and has the gross area of 233.8km[sup 2], the annual average temperature of 8.3 centigrade and the continuous snow cover period of about 100 days. The hot water leading facility was cooperatively constructed by Japan Metals and Chemicals, Hachimantai Hot Spring Development and Matsuo-mura. The total working expense is 539.3 million yen. Hot water sources are the condensate from the condenser of geothermal power plant and hot spring. This mixed hot water of 4.3 t/min is led to respective facilities. The hot water supplying channel has the length of 12.8km from the power station through the Hachimantai hot spring resort, Kamiyogi to Takaishino. Respective total areas of greenhouses using hydrothermal fluid in both districts are 1,075ha and the inlet temperature of hot water is 60 centigrade and kinds of crop are 5 like green pepper and others. Takaishino agricultural park has selected flower and ornamental plant culture such as poppy anemone, stock and statice which are suitable for this district of low temperature and insufficient sunshine. The planted area is 10,700m[sup 2]. 2 refs., 9 figs., 4 tabs.

  1. Fiscal 1998 result report on the support and diffusion projects on introduction of environment-friendly coal utilization systems. Fiscal 1998 joint demonstration project for the CMG recovery/utilization system; 1998 nendo kankyo chowagata sekitan riyo system donyu shien nado fukyu taisaku jigyo seika hokokusho. 1998 nendo CMG kaishu riyo system kyodo jissho jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report is the summary of the basic plan for the demonstration project for the CMG (coal mine gas) recovery/utilization system conducted by Tiefa Coal Mining Administration in 1998-2002. The project site is Tiefa mining property, and the plan includes the introduction program of Japanese technology for the CMG recovery/utilization system. The gas recovery plan was prepared for both Daxing and Daming One mines. The technology and facility introduced from Japan are as follows: 300m middle- class horizontal gas drainage drilling technology and facility, gas transfer technology and facility from gas drainage holes, fly ash sealing and sealed gas drainage technology and facility, measurement for gas transfer pipes, automatic sealed gas drainage technology and centralized monitoring, and automatic gas drainage facility. Recovered gas is supplied to Tiefa city and Tieling city as city gas, and this plan includes the gas supply facility to Tieling city. Gas is recovered from all coal mines in Tiefa mining property. A gas utilization rate of 32%, reduction of gas emission of 0.1% at mining faces, and reduction of gas drainage drilling lengths are estimated. (NEDO)

  2. Fiscal 1995 survey report on the feasibility study of the environmentally friendly type coal utilization system. Feasibility study of the environmentally friendly type coal utilization system in Thailand; Kankyo chowagata sekitan riyo system kanosei chosa. Tai ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    The paper surveyed the present situation and future trend of economy, energy supply/demand, coal production/distribution/utilization and the environmental effects in Thailand. The survey on the coal utilization and its environmental effects was partially requested of the environmental research institute in Thailand. The amount of coal utilization in Thailand rapidly increased to nearly four times as large as that ten years ago mainly in terms of domestic lignite under the government`s policy on expansion of the domestic energy use. However, most of this domestic lignite is low-grade coal with low calories and high sulfur content, and the use of it was rapidly increased mostly in power generation sector without no adequate environmental measures taken. This caused an environmental problem on air pollution due to sulfur oxides at Mae Moh power plant in the north several years ago, and the damages to the regional residents, etc. were given much publicity by journalism and developed the social problem. Accordingly, Thai people are now critical of the coal resource exploration and the coal use expansion. Under the circumstances, the Ministry of Industry and the energy related ministries/offices are obliged to review their development/promotion plans. 84 figs., 99 tabs.

  3. Fiscal 1995 survey report on the feasibility study of the environmentally friendly type coal utilization system. Survey on the environmentally friendly type coal utilization system in the coal preparation sector in China; Kankyo chowagata sekitan riyo system kanosei chosa. Chugoku no sentan bumon ni okeru kankyo chowagata sekitan riyo system ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    Specifying the coal preparation technology among clean coal technologies (CCT) in China, the paper investigated governmental policies, plans, standards of coal preparation technology, subjects, etc. toward the introduction/spread of coal preparation technology, and studied decision, introduction and spread of the coal preparation system suitable for the coal utilization status in China. The survey was conducted in Shanxi and Henan Provinces which are main provinces of coal production, and field survey was made at some selected coal preparation plants having different operational conditions. In the field survey, problems on the operation were extracted, and points of improvement were studied at the same time. Further, to grasp the positioning of coal preparation in CCT in China, survey was carried out on laws and regulation on coal preparation in terms of energy and environmental policies. Finally, the result of the field survey was analyzed, a coal preparation system of which the introduction/spread in medium- and long-term are enabled was proposed considering the coal utilization status and economic situation in China, and how to introduce/spread it was studied. 35 figs., 42 tabs.

  4. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in Thailand; Kankyo chowagata sekitan riyo system kanosei chosa. Tai ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper investigated and studied the present situation and future trend of coal utilization and distribution in Thailand, and the present situation of environmental effects and the measures taken for environmental protection. Around 2010, coal will probably be produced only at EGAT`s Mae Moh (MM) coal mine. Demand for overseas coal is expected to be 40-50 million tons in 2011, and preparation of the coal center becomes a subject. For general industry use coal, pretreatment such as coal preparation, coal blending and briquetting is needed, considering coal quality, usage, transport distance and environmental effects. Brown coal of MM coal mine is a lignite with high sulfur, high ash content and low heating value. Wide spread of its use can be expected if upgrading is possible such as desulfurization, deashing, increasing heating value. In the electric power generation field, the absorber was installed at the existing boiler of the mine-mouth generating plant to conduct a verification test on high grade desulfurization of ultra-high sulfur lignite. In the industry field, the circulating fluidized bed boiler was adopted. In the residential/commercial field, introduction of briquette was proposed. 80 refs., 84 tabs.

  5. Fiscal 1997 feasibility survey of an environment friendly type coal utilization system. Feasibility survey of the environment friendly type coal utilization system in Malaysia and Vietnam (case of Vietnam); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Malaysia oyobi Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa (Vietnam ban))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper grasped the state of coal utilization by coal consumption field, the state of coal physical flow in Vietnam, etc., surveyed/studied a possibility of introducing the environment friendly type coal utilization system, and assessed the possibility. As to energy resources, the north is abundant in hydroelectric and coal (mainly anthracite) resources, and the south in oil and natural gas resources. Coal production in fiscal 1997 is planned to be 10 million tons. Coal preparation technique presently available is only grain size sieving. Accordingly, it is necessary to study for heightening efficiency of facilities and modernizing facilities in accordance with the introduction of the environment friendly type coal utilization technology. During the study, it is possible to propose improvement on coal processing technology (coal preparation technology). Assessment and study are made especially of the coal selection system, fine coal recovery system and waste water treatment system. For the plan on new coal-fired power plants (300MWtimes4), there is left much necessity of proposing studying models considered of the anthracite combustion technology and environmental improvement and of assessing/studying them. 60 figs., 117 tabs.

  6. Report on achievements in proliferation project to introduce environment harmonizing type coal utilization system in fiscal 1998. Joint demonstration project for CMG recovery and utilization system in fiscal 1998; Kankyo chowagata sekitan riyo system donyu shien nado fukyu taisaku jigyo. 1998 nendo CMG kaishu riyo system kyodo jissho jigyo seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-09-01

    This paper describes the discussion report for fiscal 1998 on the CMG (coal methane gas) recovery and utilization project to be implemented from fiscal 1998 through fiscal 2002 at Tiefa Mining Bureau of Liaoning Province in China. The Daixing mine was selected as the survey object. The introduced technologies and facilities include test drilling for degassing (medium measure horizontal degassing of 300-m class), induction from degassing holes, fly ash sealing, sealed gas degassing, surveillance and control technologies and facilities. The recovered gas is to be supplied to the cities of Tiefa and Tieling as town gas, for which compressed gas feeding and controlling technologies and facilities will be introduced. This paper lists the gush-out quantity (1,000 Nm{sup 3}), the recovery quantity (1,000 Nm{sup 3}), the recovered gas concentration (%), the utilization quantity (1,000 Nm{sup 3}), and the utilization rate (%). The figures for the respective items before and after the implementation are 128366, 32949, 44.5, 7000, 5, 123500, 43890, 49.1, 39826, and 32. The quantity of gas gushing out at facings decreases in association with increase in the recovered gas quantity, whereas the gas concentration at facings in the Daixing mine in 2003 is estimated to decrease to 0.1%, contributing to safe mining operation. The test drilling for medium measure horizontal degassing expands the degassing assured scope per one test drilling seat, and can reduce the total test drilling length and construction amount. (NEDO)

  7. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in the Philippines; Kankyo chowagata sekitan riyo system kanosei chosa. Philippines ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Grasping the present situation of coal utilization technology in the Philippines, the paper proposed a feasibility study of introduction of the environmentally friendly type coal utilization system which seems to be needed in the future. (1) Introduction of the environmentally friendly type coal utilization system in the electric power generation sector: there are only four full-scale running coal thermal power plants in the Philippines. In the future, several coal thermal plants are planned to be constructed by 2005, but for the new installation, it is desirable to adopt fluidized bed boilers with wide application to coal kinds. In case of 0.3-1.0 million MW class plants, it is planned to adopt high grade import coals, and it will be natural to fire pulverized coal. For the processing of flue gas, it is a must to install desulfurization facilities and smoke/soot removal devices. (2) Utilization/development of domestic low grade coals: at the mine-mouth generating plant, it is necessary to investigate the economically minable amount of coal, confirm productivity, survey coal quality, etc., and select boiler. As to coal briquetting technology, it is necessary to examine coal quality for tests and make a thorough study of what technology is most suitable. 50 figs., 78 tabs.

  8. Fiscal 1997 survey report. Feasibility study of the environmentally friendly type coal utilization system (feasibility study of the environmentally friendly type coal utilization system in India); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Indo ni okeru kankyo chowagata sekitan riyo system kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The survey was conducted of the present situation of coal utilization and the present coal situation such as the environmental state of India which is a coal producing/consuming country next to China in Asia. The paper studied a feasibility of the introduction of the environmental friendly type coal utilization system` to be planned in India. The items for survey are the present situation of economy and energy and the future trend, environmental problems on coal utilization, the present status of the coal distribution system and study subjects, the present status of coal utilization by field and study subjects, a possibility of briquette use, a possibility of coal fluidization, electric power development plans and coal combustion technology in each industry, etc. The subjects are the obligation of coal preparation to coal thermal power plants 1000 km away from coal mines starting 2001, measures taken for effective ash use, measures taken for superannuated gas furnaces, etc. Based on the results of these site surveys and reports of the investigation under consignment from CMPDI, the paper studied/analyzed possibilities of introducing the coal utilization system having actual introduction results in Japan to India, and made an investigational report. 39 refs., 12 figs., 56 tabs.

  9. Present status of and subjects on the industrial utilization of polymer separation membranes. Japan`s first largest sea water desalination plant by RO; Kobunshi bunrimaku no sangyo riyo no genjo to kadai. Zosui bun`ya ni okeru maku riyo

    Energy Technology Data Exchange (ETDEWEB)

    Furuichi, M. [Kurita Water Industries Ltd., Tokyo (Japan)

    1998-07-05

    The utilization in Japan and abroad is discussed of desalination methods using evaporation, reverse osmosis (RO) membranes, and electrodialysis membranes, out of various desalination techniques for seawater and others containing more salt. A new seawater desalination plant built in Okinawa, Japan, is outlined, and the future trend of Japan`s efforts for desalination is predicted. The said plant in Okinawa is the largest ever built in this country, and occupies 4th or 5th place in terms of capacity among similar facilities across the world. It was completed in April, 1997, and produces pure water at a rate of 40,000m{sup 3}/day. This plant, operating on RO, comprises eight RO membrane units each capable of 5131{sup 3}/day. The membranes are of the spiral type, consisting of Toray`s crosslinked aramid-base composite membranes and Nitto Denko`s membranes composed totally of crosslinked aromatic polyamide. The greatest of the pending tasks is to reduce the desalination cost. As for the operating cost of the desalination facility at the current stage, it costs 120-130 yen/m{sup 3} on the 40,000m{sup 3}/day scale, and the power cost occupies approximately 60% of the total operating cost. It is concluded that the consumption of electric power and chemicals per pure water produced have to be reduced. 8 refs., 5 figs., 5 tabs.

  10. Research report of FY 1997 on the environmentally acceptable coal utilization system feasibility survey. Environmentally acceptable coal utilization system feasibility survey in Malaysia and Vietnam (Malaysia); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Malaysia oyobi Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa (Malaysia ban))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In this survey, the coal utilization status in individual consumption sectors and coal distribution status in Malaysia are summarized as basic data for the introduction of environmentally acceptable coal utilization systems. In this fiscal year, the status of existing coal utilization technology and environmental issues in Malaysia are summarized as basic data for the introduction of above-mentioned systems on the basis of data and information collected by basic research and site survey in FY 1996. Malaysia is one of the rich countries producing the primary resources with crude petroleum, natural gas, hydro-power, and coal. The coal demand will be realized after saturating LNG development since 2000. The major coal consumption industries are power generation sector and cement industry sector. As expected increase in the future coal consumption, efficiency of coal utilization and environmental issues are problems in the future. Based on the FS results of this survey, the survey will be continued for planning and conducting the model project required from Malaysia. 8 figs., 34 tabs.

  11. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in Malaysia and Vietnam; Kankyo chowagata sekitan riyo system kanosei chosa. Malaysia Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This survey arranged the status of coal utilization technology and the status of coal production, supply, etc. in Malaysia and Vietnam, examined/studied coal utilization systems in both countries, and finally assessed feasibility of introducing the environmentally friendly type coal utilization system. As a country of primary energy source which is abundant in crude oil, natural gas, hydroelectric power, coal, etc., Malaysia now depends on crude oil and natural gas for 80% of its energy, and places emphasis on exploration of natural gas and oil refining. In electric power and cement industries where coal is consumed, effectiveness and environmental issues in association with coal utilization are future subjects. In Vietnam, the north is abundant in hydroelectric power and anthracite, and the south in oil and gas resource, but the north and central districts are in a state of undevelopment. Coal is used for coal thermal power generation, cement industry, and residential/commercial fuel. In the future, effective coal utilization and environmental issues will be subjects. 16 refs., 38 figs., 75 tabs.

  12. Development of practical application technology for photovoltaic power generation systems in fiscal 1997. Development of technologies to manufacture thin film solar cells, development of technologies to manufacture low-cost large-area modules, development of technologies to manufacture next-generation thin film solar cells (development of technologies to manufacture CIS solar cell modules); 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu. Usumaku taiyo denchi no seizo gijutsu kaihatsu, tei cost daimenseki module seizo gijutsu kaihatsu, jisedai usumaku taiyo denchi no seizo gijutsu kaihatsu (CIS taiyo denchi module no seizo gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Research and development was made with an objective to achieve conversion efficiency of 13% in a 30 cm times 30 cm size submodule of a CIS-based thin film solar cell, and to develop a manufacturing technology that can achieve 140 yen/Wp. This paper describes the achievements attained during fiscal 1997. In fiscal 1997, based on the achievements reached during the previous year, a submodule with a size of 10 cm times 30 cm was fabricated for an attempt of improving the open voltage and short circuit current density. Simultaneously, the applicability thereof to a module with an area as large as 30 cm times 30 cm was evaluated. As a result of experimental discussions, enhancement in the open voltage was verified by increasing amount of Ga or sulfur, but it was not possible to achieve 600 mV or higher. In the research of component technologies to establish a mass production process, research and development was made on a high-resistance buffer layer film forming technology, a high-quality window layer film forming technology, a high-quality metallic rear electrode film forming technology, and patterning technologies. The outdoor exposure test was continued on laminated mini-modules with a size of 10 cm times 10 cm. (NEDO)

  13. International Conference on Defects in Semiconductors (19th), ICDS-19, Held in Aveiro, Portugal on 21-25 July 1997, Part 1

    Science.gov (United States)

    1998-01-23

    new Cultural and Congress Centre in Aveiro, Portugal. Here 263 delegates presented new data on defects in semiconductors, surveyed current knowlege... Turismo Rota da Luz Caves Säo Joäo Caves Alianca We also acknowledge the support in the form of staff time and facilities given to the conference by the...Scientific Research (1997 and 1998) on Kiban-B from the Ministry of Education, Science and Culture , Japan. References. 1. T.S. Plaskett, Trans. Metall. Soc

  14. In situ observation of surface reactions with synchrotron radiation induced semiconductor processes by infrared reflection absorption spectroscopy using buried metal layer substrates; Umekomi kinzokuso kiban wo mochiita sekigai hansha kyushu supekutoruho ni yoru hoshako reiki handotai process hanno no sonoba kansatsu

    Energy Technology Data Exchange (ETDEWEB)

    Yoshigoe, A.; Hirano, S. [The Graduate University for Advanced Studies, Yokohama (Japan); Mase, K.; Urisu, T. [Institute for Molecular Science, Aichi (Japan)

    1996-11-20

    It is known that infrared reflection absorption spectroscopy (IRAS) on semiconductor or insulator surfaces becomes practicable by using buried metal layer (BML) substrates, in which the metal thin film is buried order semiconductor or insulator films. In this work, IRAS has been measured for Langmuir-Blodgett films deposited on the BML substrate with SiO2/Al/Si(100) structure and the observed spectrum intensity has been quantitatively compared with the calculation assuming the ideal multilayer structure for the BML substrate. The BML-IRAS using CoSi2 has been adopted to the detection of SiHn on the Si (100) substrate during synchrotron radiation (SR) stimulated Si2H6 gas source molecular beam epitaxy. It has been found that SiH2 and SiH3 on the Si (100) surface are easily decomposed by SR, but SiH can`t be decomposed. From these experiments, it has been concluded that the BML-IRAS is an useful in situ observation technique for the photo-stimulated surface reactions. 26 refs., 9 figs.

  15. Applicability of the spatial autocorrection method for estimation of basement structure in Kanto plain. Array measurements of microtremors close to the Iwatsuki and Shimosa deep borehole observatory; Kanto heiya no kiban kozo suitei no tame no kukan jiko sokanho no tekiyosei. Iwatsuki Shimosa jiban katsudo kansokusei ni okeru array bido kansoku

    Energy Technology Data Exchange (ETDEWEB)

    Matsuoka, T.; Umezawa, N.; Shiraishi, H. [Saitama Institute of Environmental Pollution, Saitama (Japan)

    1996-10-01

    To investigate applicability of the spatial autocorrection method which is a microtremors exploration method for the estimation of basement structure, array measurements of microtremors were performed using the Iwatsuki and Shimosa deep borehole observatory where detailed structures were clarified as well as the Fuchu and Koto deep borehole observatory. In this study, estimated velocity structures of S-wave were compared with the geological sequence and results of acoustic velocity logging. The phase velocity was estimated by the spatial autocorrection method using FFT. The phase velocity with a smooth normal dispersion was observed in the periodic range from 0.5 to 5 sec in Iwatsuki, and from 0.5 to 4 sec in Shimosa by the combination of four-point circular arrays with radii of 100, 300, and 600 m. The underground structures estimated from the phase velocities coincided well with the geological sequence, and results of acoustic velocity logging and velocity logging for each borehole. For the Iwatsuki borehole, the basement velocity was also estimated properly in the periodic range of observation. While, for the Shimosa borehole, measurements with the period around 6 sec were required to estimate the basement velocity more accurately. 13 refs., 11 figs., 1 tab.

  16. FY 2000 Medical/engineering cooperative research project. Basic research on high-sensitivity gene-aided diagnostic systems for cancers, based on free DNA in blood; 2000 nendo kecchu yuri DNA ni yoru gan no kokando idenshi shindan system ni kansuru kiban kenkyu jisseki hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The research and development project is conducted to develop new methods directly related to early discovery of potential cancer patients, and the FY 2000 results are reported. The FY 2000 efforts are directed to improvement of intra-Alu-PCR method as the superhigh-sensitivity quantitative method, almost established in the previous fiscal year, to have higher reliability and simplicity suitable for automatic diagnosis. It is concluded that (there is no difference of significance between normal persons and cancer patients in free DNA concentration in the blood, determined by the Boyle/intra-Alu-PCR method), but this method is confirmed to be useful for prognostic monitoring of the patients who have the marrow or peripheral vessel cell transplant. Detection of qualitative gene abnormality of DNA in the peripheral vessels is investigated using the K-ras, p53 gene. Certain results are obtained by the MSA method for the former, and by the newly introduced WAVE DNA fragment analysis system for the latter. However, there are still a number of problems to be solved before these methods are applicable to screening for general medical examinations. The research on the (analysis of gene abnormality of cancer itself) has made a notable progress. (NEDO)

  17. Fiscal 1993 survey of the base arrangement promotion for foreign coal import. Survey of how the future distribution system of foreign coal should be; 1993 nendo kaigaitan yunyu kiban seibi sokushin chosa. Kaigaitan ryutsu taisei no kongo no arikata ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper studied the trend of demand for general coal and the future demand by business kind, what the coal center should be, and the arrangement of the coal distribution system. The demand for general coal rapidly increased in and after fiscal 1980, showing 50 million tons in fiscal 1991 which is approximately 3.6 times more than fiscal 1979. Such a sharp increase in demand was supplied by the increased import of foreign coal. As against the import coal, the domestic coal is decreasing, and there is little demand except the electric power use. Main users of general coal are of four business kinds such as electric power, cement production, paper/pulp production and chemical industry, the demand from which occupies 95% of all. As against fiscal 1992, an increase in demand for the coal center may be estimated at 3.5-4.0 million tons at lowest. As problems/subjects on the domestic transportation, the paper pointed out mariner shortage, rise in labor cost, and the shipping space adjustment system in terms of inland navigation ships, and high-speed Piggy back transportation and a possibility of using railroad for treatment of coal ash in terms of the railway transportation. 28 figs., 43 tabs.

  18. Fiscal 1995 survey of the base arrangement promotion for foreign coal import. Present status of the domestic transportation of foreign coal and the rationalization; 1995 nendo kaigaitan yunyu kiban seibi sokushin chosa. Kaigaitan no kokunai yuso no genkyo to gorika no hoko

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper surveys the present status and future trend of coal transportation after foreign coal arrived in Japan to clarify the subjects included in the coal distribution and study preparation of the effective stable supply system of coal. Japan`s coal demand in 1994 was approximately 126 million tons, and coal import was 120 million tons. The demand for process raw coal in 2010 will be 59 million tons, and for general coal 124 million tons. At coal fired power plants to be newly constructed in the future, there is increasing the case where a pier used for coal import is constructed at the same time. Accordingly, there is little possibility that insufficient preparation of the coal distribution infrastructure and the preparation for it become a problem. The demand increase in coal at medium and small users due to the liberalization of the electric utility wholesale more strengthens the necessity of the coal distribution base such as the coal center. For rationalization of the coal distribution, the following are considered: heightening of transportation efficiency (piggy back, self-unloader ship), deregulation, arrangement of infrastructure, coal utilization technology, etc. 24 figs., 48 tabs.

  19. Exploration of underground basement structures in Kanto plain using the spatial autocorrelation method. 1. S-wave velocity structure along the line from Hatoyama, Saitama to Noda, Chiba; Kukan jiko sokanho ni yoru Kanto heiya no kiban kozo tansa. 1. Saitamaken Hatoyama machi - Chibaken Nodashi kan no S ha sokudo kozo

    Energy Technology Data Exchange (ETDEWEB)

    Matsuoka, T.; Umezawa, N.; Shiraishi, H. [Saitama Institute of Environmental Pollution, Saitama (Japan)

    1997-05-27

    The Saitama prefectural government has been conducting basement structure exploration using the spatial autocorrelation method by dividing the entire plain area into meshes, for the purpose of improving the accuracy of estimating large-scale seismic damages. This paper reports the result of explorations on meshes in the east-west direction in the central part of Saitama Prefecture. The present exploration was intended on ten meshes in the east-west direction along the north latitude 36-degree line. The number of exploration points is 13 comprising three points on the hilly area bordering on the eastern edge of the Kanto mountainous area and ten points on the plain area. The arrangement constitutes a traverse line with a total distance of about 33 km from the west edge (Hatoyama-machi in Saitama Prefecture) to the east edge (Noda City in Chiba Prefecture). The phase velocities were estimated from the result of the array microtremor observations using the spatial autocorrelation method applied with the FET. The phase velocities were used to estimate underground structures by using an inverse analysis. As a result, detailed two-dimensional S-wave velocity structures were revealed on the traverse line. The velocity cross section expresses change in the basement structures with sufficient resolution, and at the same time the information is judged highly harmonious with existing deep boring data and the result of artificial earthquake exploration. 15 refs., 6 figs.

  20. Fiscal 1994 survey of the base arrangement promotion for foreign coal import. Feasibility study on supply of simultaneously up-graded low rank coal and heavy oil; 1994 nendo kaigaitan yunyu kiban seibi sokushin chosa. Teihin`itan to jushitsuyu no doji kohin`ika ni yoru kaishitsutan kyokyu jigyo no feasibility chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    Applicability of the M-COIL process was studied with the aim of the effective use of low grade coal. The M-COIL process, which heightens grades of low grade coal and heavy distillate low in use value at the same time, is a technology to get a reformed coal corresponding to general coal and a reformed coal corresponding to crude oil. As the whole system, an M-COIL plant is constructed near the Kertapati coal terminal in Palembang city, Indonesia. From Tanjung Enim, coal is carried in via the coal terminal by the existing railroad transport, and the reformed coal is exported as general coal via the existing route again from the terminal. Moreover, the system supplies by pipeline residual oil from the Palembang/Musi oil refinery as raw material of heavy distillate and sells the reformed oil as crude oil equivalence to oil refinery. As a result of trially calculating economy of the system with the production scale as 2 million tons in reformed coal, it was found that the effect of applying the M-COIL process can be expected in the system using subbituminous coal as raw material. 39 figs., 29 tabs.

  1. Fiscal 1997 survey of overseas coal import base arrangement and promotion. Effects of the expansion of coal trade by IPP on the supply/demand of general coal in Asia; 1997 nendo kaigaitan yunyu kiban seibi sokushin chosa. IPP ni yoru sekitan boeki no kakudai ga Asia no ippantan jukyu ni oyobosu eikyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In consideration of the coal situation in the Asia/Pacific region, a study was made of effects of the expansion of coal trade by IPP on supply/demand of general coal in Asia. When aggregating increases in demand of general coal for electric power use in ten Asian counties, they will be an increase of 130.75 million tons in 2005 over 1997. Fifty nine percent of it is equivalent to the increase by IPP and exceeds the demand expanded by electric utilities operators. Further, a possibility is predicted of contracts and coal quality being different from until now. However, there will be a lot of cases in which plans of constructing power plants in Asia are not so developed as expected except Japan, Korea and Taiwan, and also the effect of the currency crisis starting in Thailand largely affects. In terms of the coal supply, countries which export general coal are only China and Indonesia. Indonesian coal is expanding its production and export rapidly and remarkably. The environmental control in Asia has been tightening, and the fuel selected by IPP is mainly coal rather than natural gas. 40 refs., 94 figs., 179 tabs.

  2. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (development of precise structure control materials for enhancement of oil refining); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (sekiyu seisei kodoka seimitsu kozo seigyo zairyo kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described the R and D of technologies for creating original high-functional materials under the R and D system of industrial scientific technology. Japan chemical Innovation Institute (JCII) is conducting intensive joint researches under consignment from NEDO with private companies, universities and national research institutes. Among those, the paper reported the fiscal 1997 results of the following two researches conducted as development of precise structure control materials for enhancement of oil refining: precision catalytic polymerization and multi-dimensional space polymer. As to the precision catalytic polymerization, the paper is aimed at developing base technologies for the molecular weight and stereoregularity by which remarkable improvement in performance of addition polymerization type polymer can be expected, and on the development of a polymerization catalyst which arbitarily controls the primary structure such as end group structure and of a precision addition polymerization process. Subthemes are addition polymerization with limit and oriented catalytic polymerization. In relation to multi-dimensional space polymer, the paper is aimed at developing highly selective polymerization technology of aromatic compounds using enzyme related catalysts and synthesis technology of regular structure polymer, and synthesis technology of new polymer group having a new chain pattern except covalent bond/new polymer group having characteristics in three-dimensional space geometric structure. 244 refs,, 160 figs., 94 tabs.

  3. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the superconducting material and device (technical development of the Josephson device hybrid system); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chodendo zairyo chodendo soshi no kenkyu kaihatsu (Josephson soshi hybrid system no gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In order to establish basic technology for hybrid systems of superconducting and semiconducting devices, study was made on ultrahigh speed and low energy consumption properties of Josephson devices. As Josephson IC technology, a logical circuit, ring network, memory circuit, and oxide superconductor logical circuit were studied. As superconducting hybrid system technology, a Josephson device- semiconductor device interface, formation technology of signal transmission lines, and Josephson-MOS IC technology were developed. In fiscal 1997, as Josephson IC technology, switch motion of 4GHz in clock frequency was achieved by new high-density wiring process. Integration of some semiconducting processor elements, junction of surface- stabilized superconducting thin films, and motion of combination structure of some SQUIDs were also confirmed. On the hybrid system, voltage conversion operation of all interfaces was confirmed. Proper logical operation of the Josephson device hybrid circuit was also confirmed. 95 refs., 90 figs., 5 tabs.

  4. Industrial and scientific technology research and development project in fiscal 1997 commissioned by the New Energy and Industrial Technology Development Organization. Research and development of superconducting materials and transistors (report on overall investigation of superconductive devices); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chodendo zairyo chodendo soshi no kenkyu kaihatsu (chodendo soshika gijutsu kaihatsu seika hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes development of superconducting new function transistors. Fiscal 1997 as the final year of the project advanced improvement in such transistor-using processes as formation and micro-processing of superconducting thin films to show enhancement in characteristics of high-temperature superconducting transistors and possibility of their application utilizing their high speed motions. Furthermore, fundamental technologies were studied with an aim on junction transistors to be applied as circuits. For field effect transistors, evaluation was performed on critical current distribution of step-type particle boundary junction to make it possible to evaluate characteristics of hundreds of transistors. At the same time, a magnetic flux quantum parametron gate with three-layer structure was fabricated to identify its operation. In superconducting-base transistors, strong reflection was recognized on temperature dependence of permittivity of an Nb-doped strontium titanate substrate used for collectors, by which barrier height was reduced. In the junction transistor and circuit technology, isotropic ramp-edge junctions were fabricated, and so was a frequency divider circuit with single magnetic flux quantum mode operation for evaluating high-speed response characteristics. High time resolution current was observed successfully by using a high-temperature superconducting sampler system. 148 refs., 127 figs., 4 tabs.

  5. Advanced arc-welding robot with laser sensor technology and its application field; Laser sensor wo mochiita yosetsu robot no seigyo gijutsu no kaihatsu to tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Kugai, K.; Izawa, A. [Daihen Corporation, Osaka (Japan); Muto, S.; Mori, T. [NTT Fanet Systems Corp., Tokyo (Japan)

    1998-05-01

    A welding robot with a laser vision sensor was developed. The sensor used in this welding robot consists of a sensor head, a sensor controller, and a profile control board. The sensor controller calculates shapes of welding lines in the reference coordinates of a robot by processing different measurements, and the control board calculates them by using two-dimensional cross section information measured by the sensor. Distance from the sensor to the measurement point is measured as a result of the spot light injected from the sensor head being diffused and reflected on groove surface, part of which is collected to form an image. In addition, cross section shape of the groove is measured by giving the mirror a reciprocal arc movement in a direction perpendicular to the groove to move the mirror over the measurements points while making measurement. Influence of the arc light can be reduced by making the laser light flash sufficiently quicker than the changing speed of flashing of the arc light, and by removing information available when the light is cancelled from information available when it is lit. Extraction of points from an image as the sensor`s technological feature is performed by using the relationship between edge points and intersecting points in partial curve approximation. 10 figs., 1 tab.

  6. Surface wettability control by titanium dioxide photo-induced reaction. Super-hydrophilic properties. Sanka chitan ni yoru hikari reiki shinsuika gijutsu. Hikari shokubai chosinsuisei

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, T. (The University of Tokyo, Tokyo (Japan). Research Center for Advanced Science and Technology)

    1999-05-01

    Hydrophilicity results when the surface of titanium dioxide is reduced for the specified oxygen to be replaced by hydroxyl groups. The ease with which such a structural change occurs is subject to variation between titanium dioxide crystal surfaces, and is dependent greatly on the atmosphere. No hydrophilic trend is observed in an atmosphere of oxygen only without moisture and, in darkness without light, hydrophobicity occurs early. Although the contacta angle titanium dioxide with water with stability is not known, yet it is presumed, on the analogy of the case of strontium titanate, that it is in the range of 20-40 degrees. A hydrophilic trend below the range is attrributed to structural changes. The control of surface wettability is one of the basic tasks to fulfill in various kinds of mechanisms and manufacturing processes. The technology of wettability control using a titanium dioxide coating which is quite durable will be applied not only to functions involving defogging, dripproof, and self-cleaning, but also to the control of heat transmission in the mechanism and to the bonding process. (NEDO)

  7. Surface wettability control by titanium dioxide photo-induced reaction. Super-hydrophilic properties; Sanka chitan ni yoru hikari reiki shinsuika gijutsu. Hikari shokubai chosinsuisei

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, T. [The University of Tokyo, Tokyo (Japan). Research Center for Advanced Science and Technology

    1999-05-01

    Hydrophilicity results when the surface of titanium dioxide is reduced for the specified oxygen to be replaced by hydroxyl groups. The ease with which such a structural change occurs is subject to variation between titanium dioxide crystal surfaces, and is dependent greatly on the atmosphere. No hydrophilic trend is observed in an atmosphere of oxygen only without moisture and, in darkness without light, hydrophobicity occurs early. Although the contacta angle titanium dioxide with water with stability is not known, yet it is presumed, on the analogy of the case of strontium titanate, that it is in the range of 20-40 degrees. A hydrophilic trend below the range is attrributed to structural changes. The control of surface wettability is one of the basic tasks to fulfill in various kinds of mechanisms and manufacturing processes. The technology of wettability control using a titanium dioxide coating which is quite durable will be applied not only to functions involving defogging, dripproof, and self-cleaning, but also to the control of heat transmission in the mechanism and to the bonding process. (NEDO)

  8. Technology of discharge and laser resonators for high power CO2 lasers. Koshutsuryoku CO2 laser ni tsukawareru hoden reiki laser kyoshinki gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Takenaka, Y.; Kuzumoto, M. (Mitsubishi Electric Corp., Tokyo (Japan))

    1994-03-20

    This paper describes discharge excitation technology and resonator technology as basic technologies for high power CO2 lasers. As a result of progress in high-frequency power element techniques, the discharge excitation technology now generally uses laser excitation using AC discharge of capacity coupling type. Its representative example is silent discharge (SD) excitation. This is a system to excite laser by applying high voltages with as high frequency as 100 kHz to 1 MHz across a pair of electrodes covered with a dielectric material. The system maintains stability in discharge even if power supply voltage amplitude is modulated, and easily provides pulse outputs. Discharge excitation for diffusion cooled type CO2 laser generates a discharge in a gap with a gap length of about 2 mm, and can perform gas cooling by means of thermal conduction of gas, whereas a compact resonator can be fabricated. A resonator for the diffusion cooled type CO2 laser eliminates gas circulation and cooling systems, hence the device can be made more compact. A report has been given that several of these compact resonators were combined, from which a laser output of 85W was obtained by using RF discharge of 2kW. 43 refs., 21 figs.

  9. Impact of technology diffusion on economic growth and international competitiveness. Empirical evidence for four East Asian countries; Gijutsu hakyu no koka to Asia keizai no seichoryoku, yushutsu kyosoryoku

    Energy Technology Data Exchange (ETDEWEB)

    Hoshino, Y.; Sakurai, N.

    1999-06-01

    Asian economies hit by the currency crisis in 1997 are still in struggle to recover their growth and to boost again their exports. Although several short-term policy measures to stimulate the demand- side of the economy is certainly necessary, in a longer-term perspective, the key to real recovery would exist in their ability to absorb foreign technologies through trade and/or FDI, as stressed by recent new theories of growth and trade. This paper examines empirically the role of technology diffusion from advanced countries to total factor productivity (TFP) and export competitiveness in four major East-Asian countries: Korea, Singapore, Malaysia and Indonesia, three of which were seriously damaged by the currency crisis. Our major findings are summarized as follows. First, we found that technology acquisition from abroad is quite important for TFP growth of most industries in Asia, in particular for two ASEAN countries (Malaysia and Indonesia), while such productivity impact from foreign technology was relatively small for Korea and Singapore. Second, the impact of technology diffusion was much larger in that through trade than in that through foreign direct investment. Some FDI practices to preclude technology access for developing countries might explain such weaker role of FDI on TFP. Third, the nexus between TFP and export competitiveness was surely positive, in particular for industries of high export performance. However, the magnitude of impact was relatively small in Korea, in spite of its overwhelming productivity performance. (author)

  10. Research report for fiscal 1998. Research into the trends of low-carbon automotive fuel manufacturing technologies; 1998 nendo jidoshayo teitanso nenryo no seizo gijutsu doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Studies are made of optimum materials and methods for manufacturing low-carbon fuels for reduction in greenhouse gas emissions. When their thermal dynamic limits and the technological maturity are considered, it is inferred that no extensive improvement will be achieved by merely improving on the efficiency of the existing fuels. The use of various high-efficiency driving power sources utterly different in mechanism from the conventional ones, such as those for fuel cell-powered automobiles, and the promotion of the use of low-carbon fuels such as methanol and methane for all kinds of driving power sources including those for the said fuel cell-powered automobiles, will become necessary. The use will also be necessary of recyclable materials. The biomass resources, in particular, since they absorb CO2 gas in their growing process by virtue of photosynthesis, may be said to be free of CO2 gas emissions. They have their own problems, however, which involve the economy of energy consumed for their production, harvesting, transportation, and conversion into fuels. It is therefore required that their whole life cycle be studied before their greenhouse gas reduction effect may be correctly assessed. The quantities of resources available for the production of automotive low-carbon fuels, manufacturing technologies, etc., are first of all put in order for easy perusal. An effective way is assessed for the whole including the life cycle. (NEDO)

  11. Recent progress and pending problems in marketing and technology for base isolation rubber bearings; Menshin yo sekiso gomu no ichiba , gijutsu doko to ken`an jiko

    Energy Technology Data Exchange (ETDEWEB)

    Fukahori, Y. [Bridgestone Corp, Kanagawa (Japan)

    1997-08-15

    Market and technology trends of seismic rubber bearings (SRB) after Hannshin-Awaji big earthquake are explained, and problems to overcome for spreading seismic isolation are considered with both aspects of technology and regulation. Since the big earthquake, the market of SRB for buildings has been rapidly activated, sale in 1997 being predicated to amount twice as much that in 1996. For ordinary seismic buildings, their seismic designing is conducted under assumption that intrinsic frequency of earthquake wave should be 2 seconds at longest. It is preferable to assume longer frequency for larger seismic effect. However, the longer the frequency is assumed, the larger the deformation of SRB should occur on earthquake, resulting in being liable to buckle or rupture. Thus, SRB is tend to be larger and replacement of SRB/damper integral type SRB to separate type wherein they are set separately for more damping, has been proceeding. Whereas bearing load of SRB to vertical direction has be presumed to be 50{approx}80 kg/cm {sup 2}, use under much higher face pressure is requested lately. However, the increase in load induces increase in compression creep, promoting material deterioration. This problem is discussed in detail with material strength data. 6 refs., 17 figs.

  12. Fiscal 1997 project on the R and D of industrial scientific technology under consignment form NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (technical development of structure control materials / R and D of molecular harmonized materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (kozo seigyo zairyo gijutsu kaihatsu) bunshi kyocho zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    By establishing microtechnology using molecular-level bottoming-up (molecular harmonization) by imitating the system of living organism, the paper described the R and D of molecular harmonized materials aiming at developing high-functional/high-performance materials such as high-performance catalyst, photo-information functional materials and sensing materials. Under consignment from NEDO, Japan Chemical innovation Institute started the 5-year plan in fiscal 1997. Self-assembled molecular films, in which organic molecules are orderly arranged by self-assembly, aim at developing new memory/optical/sensing materials. Mesophase materials which are such materials as liquid crystal showing the intermediate state between solid and liquid, develop optical/photoconductive materials using precise molecular orientation controllability. Macroporous materials are such substances as zeolite having molecular size micro pores. The paper aims at establishment of synthesis techniques of them and development of high-performance catalyst, etc. using them. In the comprehensive investigational research, conducted was a survey of the trend overseas in addition to a study of subjects in question. Further, the supporting basic study was reconsigned to universities, etc. 57 refs., 62 figs., 17 tabs.

  13. Application of thermoelectric generator for automobile. Application of thermoelectric generation technology using Seebeck effect; Jidosha haikinetsu hatsuden. Seebeck soshi wo mochiita netsuden hatsuden gijutsu no oyo

    Energy Technology Data Exchange (ETDEWEB)

    Shinohara, K.; Kobayashi, M.; Kushibiki, K.; Furuya, K. [Nissan Motor Co. Ltd., Tokyo (Japan)

    1998-07-01

    Study was made on energy saving by waste heat power generation for automobiles. In a waste heat generation system for automobiles, exhaust gas is converted into electric energy by a thermoelectric generator through an exhaust pipe and catalyst, and supplied to a battery or electric devices through a voltage control system. The thermoelectric generator is composed of a generating module using a Seebeck element, a heat sink and a radiator. Although an Si-Ge system Peltier element is poor in generation efficiency, it is rich in high-temperature reliability, durability and safety. However, the maximum generation efficiency of the system is as low as 5% in a normal temperature region of exhaust gas around 500degC, and further improvement of its performance is essential. For the thermoelectric module, junction of thermoelectric material and electrodes is one of the issues. Because of high- temperature use, superior solder capable of resisting the peak temperature of the system, and diffusion pressure welding and plasma flame coating techniques are necessary. At present, fuel saving of nearly 5% is possible. 11 refs., 8 figs.

  14. Project to promote the technical development of global environmental industries. International research exchange project; Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kokusai kenkyu koryu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Exchanges with researchers/research institutes in overseas countries have an important meaning in promoting the research and development toward the creation of new research fields where the solution to the environmental problem is aimed at and toward the construction of new technological systems. Therefore, under the cooperation of Research Institute of Innovative Technology for the Earth (RITE), and RITE related researchers and societies, given were invitation and dispatch of researchers to international conferences and symposia involved in the global environment related technology, and exchanges with major overseas research institutes/universities. At the same time, based on the short-term invitation and dispatch so far given, a system was established for medium- and long-term dispatch/invitation of researchers who are thought to hold an important position in the future research activities. From the results obtained, domestic and foreign exchanges relating to the latest research could be promoted. In addition, researches in the basic domain related to the global environmental technology were advanced in a variety of fields overseas. The numbers of invitation and dispatch given in fiscal 1995 were 12 and 13, respectively, the results of which were included in this paper. 121 refs., 74 figs., 11 tabs.

  15. Research report of fiscal 1997. Basic research on the commercialization of innovative energy technologies; 1997 nendo chosa hokokusho. Kakushinteki energy gijutsu no jitsuyoka ni kansuru kiso chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper summarizes the research result in fiscal 1997 from the basic research results on the commercialization of innovative energy technologies. The target of a photovoltaic power generation market includes isolated power sources (several kWp) for distant places or developing countries, and those (several tens kWp) for personal residences or public facilities. Although the former is mainly promoted in the West, while the latter over the world, their profitability is unsolved. Power plants over several hundreds kWp are in demonstration test. Solar heat power generation of several tens to hundreds MWp is most profitable, however, small-scale one is poor in feasibility. Australia takes an interest in distributed photovoltaic power generation directly connected with actual lives of residents, and has a dominant opinion that desert is useless as large-scale site. This country lays emphasis on protection and maintenance rather than positive use of desert based on a basic cognition that desert is easily changed and broken. The Australian government announced power company`s obligation to use renewable energy by 2%, and a strong organization is scheduled to be newly established. 59 figs., 57 tabs.

  16. Fundamental study of interpretation technique for 3-D magnetotelluric data using neural networks; Neural network wo mochiita sanjigen MT ho data kaishaku gijutsu no kisoteki kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, T.; Fukuoka, K.; Shima, H. [Oyo Corp., Tokyo (Japan); Mogi, T. [Kyushu University, Fukuoka (Japan). Faculty of Engineering; Spichak, V.

    1997-05-27

    The research and development have been conducted to apply neural networks to interpretation technique for 3-D MT data. In this study, a data base of various data was made from the numerical modeling of 3-D fault model, and the data base management system was constructed. In addition, an unsupervised neural network for treating noise and a supervised neural network for estimating fault parameters such as dip, strike and specific resistance were made, and a basic neural network system was constructed. As a result of the application to the various data, basically sufficient performance for estimating the fault parameters was confirmed. Thus, the optimum MT data for this system were selected. In future, it is necessary to investigate the optimum model and the number of models for learning these neural networks. 3 refs., 5 figs., 2 tabs.

  17. Survey for making a data book on the new energy technological development (photovoltaic power generation); Shin energy gijutsu kaihatsu kankei data shu sakusei chosa (taiyoko hatsuden)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Data on the photovoltaic power generation are synthetically collected, systematized, and summarized as a data book on the photovoltaic power system. Main details are as follows: photovoltaic power systems were listed by usage, by size of power generation, and by authority concerned. Significance of adopting the photovoltaic system is stated at each level of each user of the country, local governments and individuals. As to the present situation of the solar cell market, solar cells were arranged in terms of production volume by region, production volume by type, production volume by company, shipment by usage, production amount, and price. With regard to policies of each country on the photovoltaic power system, those of advanced countries including Japan were summed up. Concerning the introduction of the system in each country, examples of the introduction were made clear, and at the same time the estimated volume of and the target for introduction of the photovoltaic power system were summarized. In respect to the subsidy system for the introduction of the photovoltaic power system, arranged were the subsidy system, the preferential tax system and the loan system.

  18. Development of technology for teh advancement and modernization of power distribution. ; Kyushu Electric Power Co. Haiden kodokater dot kindaika no tame no gijutsu kaihatsu. ; Kyushu denryoku

    Energy Technology Data Exchange (ETDEWEB)

    1990-07-01

    Power distribution division of Kyushu Electric Power Co. has been promoting electricity upgrading, cost reduction by efficient business administration, and development of various kinds of new technology, in order to meet requirements for upgrading of electricity and power distribution facilities being in harmony with their environment. Power failure of high- or low-tension distribution lines while at work never happens since an indirect method car with a manipulator of which hot-line work is done by a robot and a temporary backup method car which temporarily backs up high-tension current during turning on electricity have been developed. By controlling load facilities of the users directly from the electric company with the centralized control system, power supply costs can be reduced. Moreover, by the data connection between the on-line system in the head office of the company and the automatic control system, labor saving and improvement in accuracy of the input work have been achieved. Now the company is developing or improving such new technologies toward the 21st century as a data transmission system at the time of accident, a different system loop switching unit, a civil work car for underground lines, and so on. 5 figs., 2 tabs.

  19. Fiscal 1998 research report on micro-particle control process technology; 1998 nendo micro ryushi seigyo process gijutsu no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For establishment of process technology realizing control of forms and structures of micro-particles on practical equipment, research was made on related elementary technologies and current technologies. The research was promoted aiming at synthesis of micro-particles from nanometer to micrometer in size and their application to functional materials, establishment of the methodology for correlating the microstructure and function of micro-particle materials with fabrication process, and establishment of a common-base technology system in chemical technology aiming at fabrication of functional materials. As for the common- base technology, to clarify its importance, research was made on the fabrication method and dispersion mechanism of nano- particles, particle arraying method by coating, device fabrication technique by coating, and one-step synthesis and coating of nano-particles. As for the project research, synthesis of monodispersed nano-particles at large production rates, fabrication of thin films and bulk materials by arraying and coating. (NEDO)

  20. Front line of cement technolgy and control. Part 5. ; Baking process and chemical reactions. Cement saisentan sono gijutsu to kanri 5. ; Shosei katei to kagaku hanno

    Energy Technology Data Exchange (ETDEWEB)

    Hirai, M. (Ube Industries, Ltd., Yamaguchi (Japan))

    1990-06-01

    The baking process in cement production means the process that the raw materials which were mixed and pulverized in the raw material preparation process are charged into a reaction furnace which is called kiln, and clinders (intermediate product of cement) are generated. It is the process which affects quality as well as production cost of cement more significantly than anything else. In this article, an outline of the above baking facilities, how the raw materials change and clinkers are generated therein, and how they are controlled are introduced. Clinkers are composed of such products as alite, belite, aluminate and ferrite, etc. which were generated after decomposition reactions of such raw materials as lime stone, clay, silica rock and iron oxide in the above kiln. The essential ponts of the process control which makes the generation reactions of clinker compounds efficiently are such two points as well balanced raw materials to be charged into the baking facilities and stable operation of such facilities. The quality of cement which is required as finished goods is achieved by the quality control at each intermediate process and the quality tests of cement. 5 refs., 10 figs., 2 tabs.

  1. Survey on the possibility of international cooperation on production technology of biohydrogen; Bio suiso seizo gijutsu ni kakawaru kokusai kyoryoku kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    R and D on the production technology of hydrogen by biotechnology is one of the effective projects for worldwide energy supply technology and global environment protection technology in the 21st century. The research trend of various institutions promoting R and D on production technology of biohydrogen in the U.S.A. and other countries was surveyed together with the possibility of international cooperation. The production technology of biohydrogen is being watched over the world. Various researches are in promotion corresponding to environmental conditions as follows: search of not only photosynthetic bacteria but also such bacteria with hydrogen productivity as algae and anaerobic bacteria, and the gene engineering study for improving the hydrogen productivity of target microorganisms. All the institutions visited for this survey have great expectations in wide cooperative study in the future. On the possibility of international cooperation on the production technology of biohydrogen, the further precise survey should be promoted for developing more effective technologies based on the previous survey results. 156 refs., 10 tabs.

  2. 53rd Cement Technical Conference. The property of cement and mortar 2; Dai 53 kai semento gijutsu taikai. Semento, morutaru noseishitsu 2

    Energy Technology Data Exchange (ETDEWEB)

    Nishikawa, Naohiro [Nagoya Institute of Technology, Nagoya (Japan)

    1999-08-10

    Shin et al examined the neutralization phenomena in the placing joint part of mortar in the relation the placing joint time and the pore structure. Especially, it was concluded that pores more than 0.1{mu}m increased in the placing joint part by the influence of the freezing water and neutralization was promoted with an increasing of the placing joint time. Kawabe et al measured the radio wave absorption characteristics by mixing the conductive carbon fiber into mortar to be used as an electromagnetic wave absorption wall. Tokawa et al evaluated the flowability of concrete by separation of mortar from high flow concrete. Kojima et al. examined the reuse to lightweight mortar to be an aggregate of the discarded epoxy resin chip. Kawano et al. adjusted the clinker containing several percent crystals as the super fast-strong cement. The hydration reaction of alite from the initial age was promoted in addition of sodium sulfate anhydride, and high compress strength more than that in the fast-strong cement hardening body was obtained regardless of age. (NEDO)

  3. Research report of fiscal 1997. Survey on strategies of export of environment technology in overseas countries; 1997 nendo chosa hokokusho. Shogaikoku no kankyo gijutsu yushutsu senryaku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For active environment technology export to OECD countries, needs for environmental measures in developing countries were surveyed. Both collection of environment technology needs in developing countries and preparation of technology seeds information of Japanese enterprises, and promotion of environmental projects by adding an information dispatch function are important. Active preparation and exchange of experiences and know-how of concerned enterprises, local governments and national organizations are also necessary. For development and possible export of small- and medium-sized ventures with excellent technologies and know-how, a suitable consulting system is essential for risks. For smooth promotion of warming prevention by international cooperation, active development of monitoring technology is also important. To support developing countries, OJT of persons in charge in technology transfer sites, and preparation of information infrastructure are necessary. Japan with much know-how on environmental preservation should positively participate in international standardization activities such as ISO. 10 refs., 14 figs., 56 tabs.

  4. Achievement report on research and development of medical and welfare equipment technology. Comprehensive wheelchair supporting system; Iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Kurumaisu sogo shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    A comprehensive wheelchair supporting system is developed, which is a combination of a system for supporting the prescription, design, and manufacture of a wheelchair and a system for supporting the movement of the wheelchair. In the development of a motorchair prescription supporting system, a database is constructed containing wheelchair prescription experts' know-how and decision-making criteria, and their prescriptions are standardized. Since the motorchair users are heavily handicapped, an expert system is constructed on the basis of 14 types of basic wheelchairs. A design/manufacture assisting system is developed, which automatedly works out, using data collected in the prescription assisting process, a side view, rear view, and drawings for all parts that are required for the manufacture of a wheelchair. In the development of the movement supporting system, a wheelchair structure is developed, which allows a user to operate the wheelchair unaided in climbing a stairway or stepped passage. In the development of safety devices, a right angle approach automatic control mechanism, askew drive stop mechanism, emergency stop mechanism, start and stop mechanism, auxiliary system to respond upon receiving guidance signals from the wall, and a fastening device are now complete. (NEDO)

  5. Data book on new energy technology development in FY 1997. Installations of photovoltaic (PV) power generation; Shin energy gijutsu kaihatsu kankei data shu sakusei chosa. Taiyoko hatsuden jireishu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The present survey places particular emphasis on the field of PV power generation systems, and intends to collect data on solar cell application products and PV power generation system installation cases, to classify them according to their usage and to compile a collection of case records including photographs. For the data collection, two formats have been adopted. A format for the solar cell-based products includes a picture of the product, and information on solar cell output and commercialization status. Another format for the installation of PV power systems includes a picture of the installation, and information on location, output level, system type, PV module type, owner, and date of installation. The application of solar cells was classified into 14 fields, i.e., consumer appliances, road and traffic, railroad, general industries, housing related, automobiles, agriculture, ocean development, disaster prevention and safety, amenity, developing countries, buildings, public facilities, and environment. A total of 241 valid cases have been collected. Overseas products and installation cases are often characterized by new applications and innovative design, and contain a lot of useful suggestions for promoting the spread of PV technology in Japan

  6. Report on the survey in fiscal 1998. Survey on an environment technology transfer information network; 1998 nendo hokokusho. Kankyo gijutsu iten joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper describes a survey on an environment technology transfer information network. Based on the achievements obtained by the surveys in fiscal 1995 and 1996, the ICETT has participated as one organization constituting the APEC environment technology exchange virtual center, and begun providing information since April 1997. As the environment technology information, those items actually employed by factories and operation sites in Japan are put into a data base, and into a home page including training information centering around those contained in the data base, and examples of works done by local governments for prevention of pollution. Furthermore in fiscal 1997, a simulation software for a model process has been developed. Fiscal 1998 strengthened the data base for environment preservation technology information, investigated environment preserving model companies and summarized them including even their management aspect. Investigations were carried out in developing countries on application of cleaner technologies. Gaps far exceeding anticipation exist in every field between these developing countries and Japan. Environment protection measures applied and succeeded in the developing countries as the means to narrow the gaps were collected, and compiled as the specific examples. (NEDO)

  7. Technical development of cost-efficient installation of power distribution cables under pavements. Haiden chichuka ni okeru doboku kensetsu gorika gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kokusho, Koji; Kataoka, Tetsuyuki; Tanaka, Yasuyuki; Yoshida, Yasuo; Ikemi, Motoyoshi; Suzuki, Koichi; Kitano, Koichi; Kobayashi, Seiichi; Kanazu, Tsutomu; Komada, Hiroya.

    1987-12-01

    Various latest technical developments were surveyed for the cost-effective installation of power distribution cables under pavements, and their applicabilities were demonstrated with the evaluation of their cost-reduction effects. Cables in conventional vinyl protection tubes could be buried only 30cm under pavements, and in such case, the cost was reduced to 51% of those of conventional methods. As the results of soil tests, excavated soil over 80% was reusable through coarse screening. Underground radar technique to explore buried pipes from the surface was detectable several pipes buried 1.5-2.0m underground, although some problems in precision were found. The improvement of reinforced concrete man-hole structures to minimize the volume of excavated soil indicated the cost reduction of nearly 20%. The application of these techniques to the installation of cables was expected to ultimately halve the total civil engineering cost. 21 refs., 130 figs., 46 tabs.

  8. Leading research in fiscal 1996. Research study on advanced measurement/analysis technology; 1996 nendo sendo kenkyu. Kodo keisoku bunseki gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For development of production technologies suitable for environment, safety and advanced information-oriented society by improving the flexibility of production lines, some new measurement technologies were researched. Problem solution was attempted by combining the in-situ multi-dimensional measurement technology capable of easily obtaining various 3-D information with the non-contact photon measurement technology superior in operability and sensitivity under any environment conditions. This solution requires a compact radiation source with higher brightness and wider spectral range, and a high-sensitive detector. The technology concentrating photon onto minute regions, high-efficiency transmission, and control technology of photon wave front are also necessary. Development and international standardization of a common interface is unavoidable. In addition, its network is essential for advanced use of multimedia,. In the future, the comfortable life surrounded by advanced products and multimedia, comfortable social environment, safety and resource saving will be achieved by this technology. 94 refs., 75 figs., 15 tabs.

  9. Recent trend and future of mashy-state/semi-solid metal processing technology. Hanyoyuter dot hangyoko kako gijutsu no genjo to shorai

    Energy Technology Data Exchange (ETDEWEB)

    Kiuchi, M. (The Univ. Of Tokyo, Tokyo (Japan). Inst. of Industrial Science)

    1990-06-01

    The recent trend and the future forecast of the research and development concerning the processing technology of mashy-state / semi-solid metal are explained. This technology is classified into three kinds of fundamental technology, namely the manufacturing, storage / transfer, and forming. As for the manufacturing technology, the research in homogeneous heating, heating and stirring, and rheocasting method et al. is being carried out. As for the forming technology, the development of mashy-state rolling, forging, extruding, and die-casting is being carried out. The application to manufacturing of composite material is also being tried. The mashy-state / semi-solid processing technology is expected with hopeful feasibility to manufacture some metallic material having new functions which can not be obtained by the usual processing, and also from viewpoints of high-quality, energy-saving et al. In order to make these technologies practicable, however, many kinds of research and development are required, such as quickiy heating and cooling, liquid / solid fluid controlling, heat resistant tool material et al. as well as the element technologies needed individually. 3 refs., 17 figs.

  10. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (technical development of structure control materials / R and D of multi-stimuli-responsive materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (kozo seigyo zairyo gijutsu kaihatsu) kodo shigeki oto zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described multi-stimuli-responsive materials out of the technology developments for creating original high-functional materials under the system of R and D of industrial scientific technologies. These are materials which repeatedly reproduce functions such as separation, penetration and movement in response to stimuli by imitating living organisms. In relation to polymer multi-stimuli-responsive materials, various copolymers were synthesized using N-acetyl (meta) acrylamide, of which the synthesis method was established in the previous fiscal year, as a main component, and thermal responsive polymer with upper critical solution temperature which becomes a base of separation functional materials was searched for. By immobilizing it with molecular recognition ligand, measured was thermal dependence of affinity of the immobilized matter to albumin. Also studied were molecular recognition cell adhesion/separation functional materials. Concerning composite multi-stimuli-responsive materials, with the use of silica microcapsule surface-immobilized with silane coupling agent, studied were the optimum conditions for immobilizing thermo-responsive polymer to the surface of the capsule. Using motion functional materials by ion exchange resin, obtained was motion functionality which is satisfactory at the state of practical use. 94 refs., 82 figs., 16 tabs.

  11. Study of seismic data acquisition using physical modeling system; Butsuri model jikken sochi wo mochiita data shutoku gijutsu ni kansuru kento

    Energy Technology Data Exchange (ETDEWEB)

    Tsukui, R.; Tsuru, T. [Japan National Oil Corp., Tokyo (Japan). Technology Research Center; Matsuoka, T [Japan Petroleum Exploration Corp., Tokyo (Japan)

    1996-10-01

    For the physical modeling system of Technology Research Center, Japan National Oil Corporation, data acquisition on the ocean and ground can be simulated using models. This system can provide data for verification of the data processing and elastic wave simulation algorithm. This can also provide data for decision of experiment specifications by making a model simulating the underground structure of the given test field. The model used for the physical modeling system is a gradient multilayer model with six-layer structure. Depth migration before stacking was conducted using data obtained through two acquisition methods, i.e., up-dip acquisition and down-dip acquisition. The depth migration before stacking was performed for data obtained by up-dip acquisition in addition to the records obtained by down-dip acquisition. Consequently, a definite reflection surface was observed, which has not been observed from the processing results of down-dip acquisition data. 9 figs.

  12. Aiming at development of a technology that is welcomed by customers and that sees one step ahead; Okyakusama ni yorokobareru ipposaki wo mita gijutsu kaihatsu wo mezashite

    Energy Technology Data Exchange (ETDEWEB)

    Tsujimura, K. [Kansai Electric Power Co. Inc., Osaka (Japan)

    1998-11-10

    This paper describes technological development at the Kansai Cable Service Company. A momentary voltage drop monitoring system detects momentary power failure at substations in the load system, transmits and aggregates the information at branch offices via control stations. Data are processed into readily identifiable information, and displayed quickly on branch office terminals or at sales offices. In a TV wave reception disturbance survey, the disturbance can be surveyed by utilizing the image quality evaluation characteristics of MPEG2 that can store animated images of good quality in digital data. The SS wireless system consists of a wireless transmission device intended for remote monitoring and image information transmission. The communications distribution frame control system puts terminal information (the number of terminals exceed several hundred thousand depending a case) into a database, and structures a system by using a low-cost general purpose personal computer which can perform information retrieval and terminal table preparation easily in a short time. The system improved the efficiency and accuracy of the control operation. A PHS quasi animated image transmitting system was also developed. A CATV telephone system and a CATV Internet system were investigated and studied as an experimental study on wide-area multi-media service. (NEDO)

  13. Application of computer technology for control system in distribution network; Haiden keito un`yo seigyo eno denshi gijutsu no tenkai

    Energy Technology Data Exchange (ETDEWEB)

    Sugiyama, H. [Chubu Electric Power Co. Inc., Nagoya (Japan)

    1996-09-20

    This paper describes the course of history and the future trend in a transmission line automation system. A system to remotely control section switches was begun installation around 1985. The system was intended to reduce number of personnel and amount of time required for works at sites, perform immediate system operation, acquire a real-time site information for a distribution network operation instructor, and have the instructor make quick, proper and accurate determination by using the acquired information. This system remotely monitors and controls section switches in distribution lines, and consists of a `parent station equipment` installed in a sales office, a `child station equipment` installed in combination with the section switches, and a `communications transmission path`. The parent station equipment is a computer system. The child station equipment is installed at every section switch to link the parent station equipment with the section switches. Pair cables are used in signal transmission. A map information indication and automatic execution system of wide area operation handling type has now begun operation. The system is expected of wider use in the future as a system applicable to urban areas where distribution networks are congested. 6 refs., 8 figs.

  14. Application of potential distribution analysis technique for cathodic protection in seawater. Kaisuikei denki boshoku eno den'i bunpu kaiseki gijutsu no oyo

    Energy Technology Data Exchange (ETDEWEB)

    Inagaki, S.; Miyazaki, M. (Toshiba Corp. (Japan). Heavy Apparatus Engineering Lab.); Kikuna, N.; Sato, T.; Nishino, Y. (Toshiba Corp., Tokyo (Japan). Principal Office)

    1993-04-15

    In order to design the cathodic protection of the equipments and piping facilities in the seawater quantitatively and more precisely, the research and development have been firstly advanced on the titanium made condenser and circulating water tubes as the object, and then the introduction of the numerical analysis to the corrosion phenomena has been tried. Through the steps such as the measurement of corrosion data for the input, the verification by the three dimensional model, the test by the actual equipments and facilities and so forth, a technology to get the potential distribution in the cathodic protection by the finite element method (FEM) has been developed. This analytical technology has the distinctive features as follows: Since this can make the compound model by combinating the different dimensions, the potential distribution analysis of the complicated structures with the various shapes and large scale can be done; In addition, if necessary, three dimensional potential distribution can be analyzed by using the three dimensional model. In this paper, accompanied with the plant orienting the compactification, a combination of the condenser with the ball cleaning facility and so forth, which have become to be required for the cathodic protection design with a higher accuracy, as well as the application example to the super stainless steel made seawater cooler and so forth are introduced. 2 refs., 16 figs., 3 tabs.

  15. Global environmental benefits of industrial heat pumps (fiscal 1993); 1993 nendo koon heat pumping gijutsu ni yoru chikyu ondanka keigen koka ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    An investigational study was conducted aiming at making a quantitative grasp of effects of the spread of industrial heat pumps on energy conservation and greenhouse gas reduction and at promoting the spread. Finally, the following eight countries joined this international joint research: Canada, France, Japan, Holland, Norway, Sweden, the U.K. and the U.S. Each country share the work and expenses for the research with each other. Japan made investigational researches on the application of heat pumps to processes of the chemical industry, oil refining industry, food industry, paper/pulp industry, and dyeing/weaving industry, and on the effects of greenhouse gas reduction. As procedures taken, values up to 2010 were estimated of energy prices in each country, energy supply/demand, rates of the heat source configuration for electric power supply, etc., the heat flow of the above-mentioned process was made clear, and analyses were conducted of annual profits, energy consumption, and depreciation period in the case of adopting heat pumps. Moreover, the energy conservation amount and greenhouse effect gas reduction amount were estimated based on the result of the analyses. 69 figs., 196 tabs.

  16. Study on the application of plasma technology to advanced global environmental harmony type technology; Kankyo chowagata gijutsu no kodoka eno plasma no oyo ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Plasma application technology is systematically investigated. Fundamental feature of plasma, method of plasma generation, special features of plasma, and its application area are arranged. The present application area of plasma chemical reaction in industry has been arranged for each utilization and process according to the patents research and scientific journals. For the global environmental harmony type technology, functions required for the membrane separators are investigated by assuming the recovery of environmental load substances, and possible manufacturing process of the membrane by using plasma technology is also investigated. For the improvement of catalysis by the plasma process, the requirement for the catalyst, a fine particle effect for catalyst, production of catalyst, plasma technology applicable to the improvement of catalyst, thermal plasma, and low-temperature plasma are described. For the application of plasma to enhance the catalysis reaction, synthesis of ammonia and methanol are described. 177 refs., 67 figs., 18 tabs.

  17. Feasibility study on the demonstrative test on the hybrid mini hydroelectric power generation technology. 2; Hybrid gata mini suiryoku hatsuden gijutsu ni kakawaru jissho shiken kanosei chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A study was made for the purpose of electrification of unelectrified zones of the mountainous areas in developing countries using extremely small hydroelectric power facilities. The target for this project is a development of a micro hydroelectric power system with a size of about 5kW, which is estimated regarding that 1 village has 80 houses and each house needs electricity of 60W. In the study, the low-head system using a weir of irrigation channels in Subang pref. of West Java state was selected by the evaluation of access, stability of flow rate, natural conditions, etc. The hydroelectric power plant is of a flow-in method in which water is taken from the left bank and is injected/discharged to the downstream of the left bank. As the hybrid complementary power source, hybrid battery with a two-hour charging time at peak and a capacity of 3.5kWh was considered. When estimating the construction cost of the hybrid micro hydroelectric power system and equalizing by durable years, the operational cost per kW is 15 times higher than the benefits which local people receive. It was judged to be difficult to say that the micro hydroelectric power system is economically feasible. It was predicted that the financial profit during the demonstrative test is good, according to a trial calculation of income from power rates and the operational cost. 18 refs., 90 figs., 53 tabs.

  18. Chemistry for preserving the global environment. Part 5. Offensive odor; its present condition and control technique; Kankyo sozai no kagaku. 5. Akushu no genjo to taisaku gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Saiki, Y.

    1996-07-01

    Offensive odor substances belongs to a quite different field from the perfume inspire of the same sense of smell, and is a substance forming a lot of troubles which is formed in intimate resident environments such as manufacturing factories of the chemicals, incineration and decomposition treatment process of living body relating substances, stock raising facilities, restaurants and others. A material called the offensive odor substance is generally in very low concentration in the atmosphere, most of which is ppm order in its detection limit. And, the offensive odor intensity is proportional to logarithm of its concentration. For example, even removing 99.9% of the offensive odor substance from its forming source, there is remained its difficult countermeasuring problem of no removing as its offensive odor. At present, the offensive odor is severely regulated by means of laws and acts, research on its relating field is active, and its relating publications have become plenty. In this paper, outline on recent state of the offensive odor and its measuring technique was summarized. 14 refs., 6 figs., 8 tabs.

  19. Honda new in-line five cylinder engine-noise and vibration reduction. Honda shin chokuretsu 5 kito engine to shindo soon gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Uchida, T.; Katano, H. (Honda Research and Development Co. Ltd, Tokyo, (Japan))

    1990-04-25

    Development of compact luxury automobile in the 1990 {prime} s, of which the development concept is an exhilarating drive'', was introduced mainly in noise and vibration problem. In order to heighten automobile in exhilarating drive'', ie., linearity level, further improvement was known to be possible, if the following descriptions are noted in the noise and vibration: As a result of study, first for the decrease in torque fluctuation in the low rotation range, the engine is to be made five in number of cylinders. Next for the decrease in degree of vibration in the medium and high rotation range, and elimination of sudden change in vibration level, high power plant rigidity is to be maintained to prevent bending resonance, from generating, of power plant and mount is to be laid out in the vicinity of center gravity, almost nil in vibration. Further to eliminate the rumbling noise of crank hammering, etc., torsional rigidity was maintained and vibration damper was equipped. 4 refs., 10 figs.

  20. Survey for making a data book on the new energy technological development (the wind power generation); Shin energy gijutsu kaihatsu data shu sakusei chosa (furyoku hatsuden)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper collects and arranges data on examples of introducing the wind power generation overseas and to Japan, laws and rules, support, policies, etc. In the overview of the wind power system, described was configuration of the horizontal axis wind turbine and the vertical axis wind turbine which are power generation use wind turbines. As to the main specifications for the wind turbine, specified were rotor diameter, tower height, wind velocity, generator, gear type, blade, tower shape, direction control, control of revolution number, brake, etc. Also described was a concept diagram of the wind power system. Concerning examples of the system introduction, stated were changes of the capacity (MW) of wind power generation by country, examples of the introduction to Japan, and examples overseas. Laws and rules in Japan, support in Japan, and support in each country were described. The paper further deals with policies of each country, cost of wind turbines, basic terminology, and a list of the main companies and groups concerned.

  1. New energy technology development related database construction survey (wind power generation); Shin energy gijutsu kaihatsu kankei data shu sakusei chosa (furyoku hatsuden)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To arrange systematic data relating to new energy, the latest published data relating to the wind energy conversion systems have been collected and arranged. For the overview of wind energy conversion system, wind turbines with horizontal axis and vertical axis, specification of wind turbine, and conceptual figure of wind energy conversion systems are illustrated. For the installation examples, introduction development of wind energy conversion systems in the world is described for Japan, the USA, Germany, Denmark, Spain, Sweden, India, and Belgium. For the relevant legislation and support plan, relevant legislation for the introduction of wind energy conversion in Japan, support plan in Japan, and support plans in foreign countries are described. Prices of wind turbines by wind turbine makers in the world, construction cost by Japanese makers, basic term, and subsidiary company and organization are shown

  2. Development of high field magnets at the National Research Institute for Metals. Kinzoku zairyo gijutsu kenkyusho ni okeru kojikai magnet gun no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kiyoshi, T.; Inoue, K.; Maeda, H. (National Research Inst. for Metals, Tsukuba (Japan))

    1993-06-20

    Sinece 1988, the Scince and Technology Agency has initiated the superconductor multicore project, which has a purpose of the versatile study on the high temperature superconducting materials of the oxide series. The National Research Institute for Metals is in charge of 5 cores out of them, and in the performance evaluation core which is one of them, the development of each kind of the high field magnets is being advanced for evaluating the characteristics under the high magnetic field. As the magnets, including the 40T class hybrid magnet which generates the steady state magnetic field of 40T, the superconducting magnet of 20T with a large diameter which generates the magnetic field over 20T with a superconductor, the condenser bank system for the pulse magnet to generate the pulse magnetic field up to 80T, and the ultra-precise magnet system which generates the magnetic field with a high uniformity will be consolidated. Keeping pace with a removal of the National Research Institute for Metals to Tsukuba, the construction of the strong magnetic field station is being advanced in the Sakura area. These several kinds of magnets are scheduled to be used in turn for the international joint study. 33 refs., 5 figs., 4 tabs.

  3. CD-R, DVD-R. Function and coating technique of organic dye film; CD-R, DVD-R. Yuki shikisomaku no yakuwari to tofu gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Otsuki, S. [TDK Corp., Tokyo (Japan)

    1998-11-05

    This paper describes the function and coating technique of recording layer (organic dye film) of CD-R and DVD-R. The organic dye film is between the substrate and reflective film. When laser with an intensity in response to the information signal is irradiated to the organic dye film, the dye is decomposed and its reflectance is changed, to record the information. The recording characteristics are affected mainly by the composition of dye and thickness of the film. For the organic dye, safety and solubility in solvent are required from the viewpoint of the process, and optical constants, thermal properties, high-temperature/high-humidity resistance properties and optical resistance properties are required from the viewpoint of recording characteristics. The organic dye is classified into the cyanine dye, phthalocyanine dye and azo dye. The process of disk production consists of the substrate forming, due spin coating, reflective film spattering, UV protective layer coating, and disk pasting. For the spin coating, the dye solution is dropped on the substrate rotating at the low speed, and is uniformly coated by accelerating the rotation to remove the excess dye solution from the disk. Thickness of the film can be controlled by the rotating speed and its acceleration. Control of the dye film thickness is a significant control item of characteristics. 2 refs., 8 figs.

  4. FY 1998 annual report on the surveys on high-efficiency power generation techniques of the next generation; 1998 nendo jisedai kokoritsu hatsuden gijutsu ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Comprehensive surveys on and assessment of seeds of the high-efficiency power generation techniques of the next generation, both domestic and overseas, are conducted to help propose preliminary national research themes. In FY 1998, the survey efforts are directed not only to the trends of those for industrial power generation under development, e.g., combined cycle, coal-gasification combined cycle and pressurized fluidized bed combined cycle, but also to the trends of newly proposed systems, e.g., humid air combined cycle, methane reforming combined cycle, fuel reforming/humid air combined cycle, fuel reforming/fuel cell combined cycle and micro gas turbine, to further enhance efficiency by integration with a gas turbine power generation system. The efforts are also directed to (new power generation techniques in the basic research stage) being studied mainly by academic and research organizations, and to development trends of new power generation techniques under development by private enterprises, mainly based on the patent survey. (NEDO)

  5. Development of the advanced load leveling air conditioning technology utilizing unutilized energy; Miriyo energy kodo katsuyo fuka heijunka reidanbo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A heat supply plant utilizing unutilized energy is called for environment-friendly efficient operation including stable heat supply, energy saving, CO{sub 2} emission control and power load leveling. Toshiba developed the optimum operation system for environment-friendly efficient operation considering heat demand prediction and characteristics of a heat supply plant. The demonstration test result showed that this system is effective to reduce power cost of a heat supply plant by nearly 15%. This system was promoted by joint research of NEDO, Heat Pump and Thermal Storage Technology Center of Japan and Toshiba supported by Agency of Natural Resources and Energy, MITI. (translated by NEDO)

  6. Adaptive control in an aircraft propulsion system and system integration with flight control; Kokukiyo enigne - tekio seigyo gijutsu oyobi hiko seigyo tono togo

    Energy Technology Data Exchange (ETDEWEB)

    Nagatome, S.; Seo, N.; Negoro, T.; Kaneda, S.; Matsushita, T.; Kono, Y.; Kanbe, K.; Fujiwara, K. [Kawasaki Heavy Industries, Ltd., Kobe (Japan)

    2000-04-01

    Aircraft engine controllers incorporating computer technology have enabled the highly automated control of the entire engine system, and consequently have been put to practical use as Full-Authority Digital Electronic Control (FADEC). In future such FADEC technology will be evolved and combined into an Integrated Flight and Propulsion Control (IFPC) system which will automatically optimize the whole aircraft propulsion system. In this paper the application of the adaptive control, part of the IFPC technology, is described. (author)

  7. Fiscal 1995 research investigation on chemical process technology using supercritical fluid; 1995 nendo chorinkai ryutai wo riyoshita kagaku process gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With relation to the supercritical fluid utilization technology, conducted in fiscal 1995 were collection of basic data, extraction of R and D subjects and survey/analysis of application fields based on the literature survey and overseas field survey. From the research results, the following were selected as research subjects: as to the clean/recycling process technology, non-selection cascade treatment process of mixed waste plastics, hazardous waste treatment process, and radioactive waste treatment process. As to the unused resource utilization process technology, the supercritical submerged combustion power generation process, heavy hydrocarbon resource reutilization process, biomass synthetic utilization process, and carbon dioxide reutilization process. As to the next generation reaction process technology, the simple reaction process, de-organic solvent process, chemical materialization process for methane, and reaction separation combined process. As the innovative material process technology, the plastic forming process, high-functional materials, high-efficiency energy conversion materials, and heightening of function of solid wastes. 537 refs., 116 figs., 54 tabs.

  8. Survey of pollution-resistant plants and their cultivating techniques; Osen busshitsu taisei shokubutsu to sono shokusai gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The reduction of forests due to environmental pollution has been surveyed, to investigate the pollution-resistant plants and solid microorganisms. In Japan, the blight of needle-leaf trees (pine and momi fir) and of Japanese oak has occurred, and blight of some other trees, such as wild cherry trees, Japanese apricot trees, birch, Japanese cedar, cypress and bamboo, has been reported from various regions. In this article, plants reported to be resistant to pollutants are listed, and the physiological features of these plants are described. Furthermore, to develop pollution-resistant plants, reports relating to clarification of the mechanism of resistance development and the genes involved are reviewed. Microorganisms which symbioses for roots support these root functions. They also suppress the activity of pathogenic microorganisms and improve the environment around the roots, thus helping plants to grow normally. The roles played by symbiotic microorganisms and how to utilize these organisms are discussed. Their functions in coping with acid rain and heavy metal pollution, and how to utilize such functions are also discussed. 707 refs., 13 figs., 13 tabs.

  9. Survey on the technological development issues for large-scale methanol engine power generation plant; Ogata methanol engine hatsuden plant ni kansuru gijutsu kaihatsu kadai chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    Based on the result of `Survey on the feasibility of large-scale methanol engine power generation plant` in fiscal 1992, concrete technological development issues were studied for its practical use, and the technological R & D scheme was prepared for large-scale methanol engine power plant featured by low NOx and high efficiency. Technological development issues of this plant were as follows: improvement of thermal efficiency, reduction of NOx emission, improvement of the reliability and durability of ignition and fuel injection systems, and reduction of vibration. As the economical effect of the technological development, the profitability of NOx control measures was compared between this methanol engine and conventional heavy oil diesel engines or gas engines. As a result, this engine was more economical than conventional engines. It was suggested that development of the equipment will be completed in nearly 4 years through every component study, single-cylinder model experiment and real engine test. 21 refs., 43 figs., 19 tabs.

  10. Technical engineers exchange project (coal mine technology field). Training in China; Gijutsusha koryu jigyo (tanko gijutsu bun`ya). Chugoku no kenshu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Adachi, T. [Japan Coal Energy Center, Tokyo (Japan)

    1998-07-01

    The paper described JCOAL`s project on the exchange of technical coal engineers of China. In the project on sending of engineers to China in the first term, coal mine engineers of Japan (Taiheiyo Coal Mine, Kushiro Works, Training Center) were sent to the Daitun coal-thermal power plant, Peixuan city, Jiangsu province, in September, 1997 to introduce the production control technology in Japan. They contributed to the heightening of productivity in coal mines in China. Eighteen Chinese participated in the training. Mechanization has been comparatively well in progress, and it was 83% in coal mining and 91% in drilling. The kind of coal is mostly a raw material coal. The stuff members are 30,000, and expert engineers are 4,200. The plant has an output of 130,000 kWh, owns its railroad, is run on the general multiple management, and is largely developing. The project on sending of engineers to China in the last term was carried out in February 1998 for tracing/confirming how the results of the training conducted in September are made the most of and if or not there is something bad and for obtaining the detailed data. A certain degree of promotion and effects were able to be confirmed. A project on training of the head, sub-head, etc. who were invited to Japan to lean production/management control was also carried out in November and December 1997. 1 tab.

  11. Historical overview of geophysical exploration for hydrocarbon prospecting in Japan; Nippon no sekiyu kogyo ni okeru butsuri tanko gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Tamura, Y. [Japan Petroleum Exploration Corp., Tokyo (Japan)

    1998-08-01

    This paper describes a historical overview of geophysical exploration for hydrocarbon prospecting in Japan. In general, history is divided into eras by the qualitative change. In the case of geophysical exploration, the history is desired to be divided by considering the both of qualitative change in the technology and that in the practical application. In the early time of geophysical prospecting, gravitational exploration, magnetic exploration, seismic refraction method and seismic reflection method were elementarily and successfully tried. In the era of classical geophysical exploration, seismic reflection method and gravitational/magnetic methods were basically completed, and accumulation structures of potential petroleum were discovered around existing oil fields. In the era of systematic geophysical exploration, techniques of underground geological reflection profiles were completed with digitalization, and systematic petroleum exploration was conducted. In the era of modern geophysical exploration, 3D seismic was put into practice, and the inversion accuracy was improved, in which the geophysical exploration could be contributed jointly with the geological techniques. New development era of geophysics is expected. 31 refs., 10 figs., 5 tabs.

  12. Applied technology by use of inverters for underground minig in Ikeshima Colliery; Ikeshima tanko no konaiyo inverter oyo gijutsu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Hiromoto, K.; Murakami, M.; Horinouchi, K.; Yamaguchi, M. [Matsushima Coal Mining Co. Ltd., Fukuoka (Japan)

    1997-10-25

    This paper describes the application of inverters for underground mining in the Ikeshima Coal Mine. The total length of belt conveyors for coal transportation in the seam road has become 7500 m with increasing the peak transportation by the belt conveyors from the face to pocket. The coal transportation facilities composed of 25 belt conveyors have become significant. At the same time, facilities for transportation of materials and members have been increased with a long distance to the faces. Inverter control of belt conveyors was introduced in 1985 for controlling the coal transportation amount. After that, explosion proof inverters for underground use were developed. In 1985, 22 kW inverter variable speed motor was employed for the chain conveyor at the main coal lifting facility. Thus, the coal transportation amount can be controlled. In 1994, this system was employed for the belt conveyor at the intermediate pocket. Thus, the transportation amount can be controlled in the centralized control room. In 1995, an explosion proof 45 kW inverter remote control hoist has been developed, which is operated by wire remote control. Labor-saving of transportation of materials and members can be achieved. In 1996, shuttle running high-speed man riding car with inverter driving has been introduced in the southern horizontal gallery. 4 figs.

  13. Investigation on the development and introduction of new geothermal exploration technology. Part 2; Chinetsu shintansa gijutsu kaihatsu donyu ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    For the purpose of maintaining and increasing the geothermal power generation amount, the development was made of exploration technologies which become necessary in the stage of geothermal reservoir exploration and in the stage of reservoir management and peripheral development. As development technologies, the following were proposed: fracture flow characteristics exploration method (FE), production/circumference areas flow characteristics exploration method (PE), and integrated analyzing method (IA). As to FE, for the survey of geothermal fluid dynamic characteristics in fracture aggregate composing the geothermal reservoir, developments were made of the well hydraulic testing method for examining hydraulic characteristics of fracture system and of the fracture evaluation method composed of the core/logging analysis method, the permeability logging method and electroseismic exploration method. As to PE, for maintaining and managing steam production in the developmental area and developing the area to the circumference area, development was conducted of technology for exploring variations of reservoirs and fluid flow from the data on precision gravity, three-dimensional resistivity, fluid geochemistry, active seismic wave and self potential, precision electromagnetism, passive seismic wave, etc. As to IA, development was made of reservoir simulation technique, etc. 2 refs., 70 figs., 41 tabs.

  14. Prediction of solidification and phase transformation in weld metals for welding of high performance stainless steels; Kotaishoku kotainetsu stainless koyo yosetsu kinzoku no gyoko hentai no yosoku gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Koseki, T.; Inoue, H.; Morimoto, H.; Okita, S. [Nippon Steel Corp., Tokyo (Japan)

    1995-02-28

    Prediction technology is introduced on the solidification and transformation of weld metals used for high performance stainless steel. A model has been developed which uses Thermo Calc, a multiple balanced calculation program, as a means to analyze the solidification of multi-component alloys including the polyphase solidification such as eutectic and peritectic. Verification has been in progress concerning the adequacy of this model and the adaptability as a practical steel. The following are the prediction technologies for solidification and transformation which have been derived from experiments and applied to welding techniques: the effects of nitrogen on the solidification mode and residual {gamma}quantity of a welding metal that is required for controlling the welding/solidification of high nitrogen content {gamma}system stainless steel; the structural control of weld metal for high corrosion resistance high Mo stainless steel, in which high Ni and high Mo contents are indispensable for attaining the optimum structure; the structural control of weld metal for two-phase stainless steel containing Mo and N, in which it is essential to secure a high nitrogen content and a {delta}/{gamma}phase balance in a weld metal; and the precipitation prediction of intermetallic compound in a high alloy weld metal for a high alloy stainless steel, for which an explanation is there by Cieslak et al. based on the phase stability theory. 22 refs., 16 figs.

  15. Data book on new energy technology development in FY 1997. Photovoltaic (PV) power generation; Shin energy gijutsu kaihatsu kankei data shu sakusei chosa. Taiyoko hatsuden

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of understanding the present status of photovoltaic power system (PVPS) and supporting its promotion, various data were collected. The significance of adopting PV power technology was specified for customers of various levels, such as nation, local communities, industries and individual households, to clarify the CO2 reduction effect and energy pay-back time. Data illustrate the solar cell production according to region, cell types, industries, applications, production value, and market price. Policies for PVPS in industrial countries were compared with those in Japan. Distribution of PVPS in various countries was compared with that in Japan in respect to installations and purposes of the introduction of PVPS. Financial aid programs such as subsidies, tax benefits and loans for the installation of PVPS in Japan were listed. The trend of PV-related budget of MITI was shown with every project`s description. Steps of introducing PVPS from plan to installation were depicted in the form of flow chart. Were shown measures sponsored by the government or local organizations to promote PVPS. Domestic and foreign firms related to PVPS including PV module suppliers, and PV installation contractors were listed

  16. Report on the cooperative study of technology to collect valuable resources in brine; Kansuichu no yuka shigen kaishu gijutsu ni kansuru kenkyu kyoryoku hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The paper reported on the research, design, and evaluation on a system to recover by sedimentation magnesium from the brine in the salt manufacture by solar evaporation in Mexico, and a system to recover by adsorbent lithium, boron, etc. from the brine of the solar pond salt field in China. In the case of Mexico, an overall recovery system was developed, but in the evaluation of economy of the system, it cannot be said that the system is feasible even if assuming that the required fresh water can be secured. It was found out that the economical efficiency largely depends upon the cost of hydrated lime and the selling price of magnesia clinker. In the case of China, a plant for production of 500 tons/year of lithium carbonate was conceptually designed to evaluate the economical efficiency. As a result, the internal profitability of the plant is not so high, approximately 6%, though continuously profitable during the operation of 15 years. It was indicated that the project was not economically very efficient. 164 figs., 44 tabs.

  17. FY1995 new technology of artificial organ materials which can induce host biocompatibility; 1995 nendo jinko zokiyo seitai kino fukatsukagata sozai no kaihatsu gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    The aim of this project is to produce a highly biocompatible materials for next generation's artificial organs using the following methods: 1, Micromodification of polymer materials. 2, Biocompatible treatment for biological materials. 3, Application of bioabsorbable materials. 4, Bioactive substance immobilization. and 5, Use of autologous tissue as artificial organ materials. As a synthetic polymer material, microporous polyurethane was used for a small diameter vascular prosthesis. The graft with this technology was successfully implanted in rat abdomical aortic position. The graft of 1.5 mm in internal diameter and 10 cm in length showed excellent patency with nice endothelialisation. As a biological material, microfibers of collagen was used for a sealing substance of vascular prothesis. The microfibers absorbed a large amount of water, which could prevent blood leakage from the graft wall. The graft showed non-thrombogenic property and excellent host cell affinity, resulted in rapid neointima formation. As to autologous tissue, bone marrow was used, since marrow cells can differentiate into any mesenchimal cells with synthesis of growth factors. Marrow cell transplanted vascular prothesis showed rapid capillary ingrowth. These results indicated that the newly designed materials had suitable properties for materials of next generation's artificial organs. (NEDO)

  18. FY1995 new technology of artificial organ materials which can induce host biocompatibility; 1995 nendo jinko zokiyo seitai kino fukatsukagata sozai no kaihatsu gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    The aim of this project is to produce a highly biocompatible materials for next generation's artificial organs using the following methods: 1, Micromodification of polymer materials. 2, Biocompatible treatment for biological materials. 3, Application of bioabsorbable materials. 4, Bioactive substance immobilization. and 5, Use of autologous tissue as artificial organ materials. As a synthetic polymer material, microporous polyurethane was used for a small diameter vascular prosthesis. The graft with this technology was successfully implanted in rat abdomical aortic position. The graft of 1.5 mm in internal diameter and 10cm in length showed excellent patency with nice endothelialisation. As a biological material, microfibers of collagen was used for a sealing substance of vascular prothesis. The microfibers absorbed a large amount of water, which could prevent blood leakage from the graft wall. The graft showed non-thrombogenic property and excellent host cell affinity, resulted in rapid neointima formation. As to autologous tissue, bone marrow was used, since marrow cells can differentiate into any mesenchimal cells with synthesis of growth factors. Marrow cell transplanted vascular prothesis showed rapid capillary ingrowth. These results indicated that the newly designed materials had suitable properties for materials of next generation's artificial organs. (NEDO)

  19. Investigational study of the CO2 balance in high temperature CO2 separation technology; Nisanka tanso koon bunri gijutsu ni okeru CO2 balance ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    An investigational study was conducted to clarify the adaptable environment and effectivity of technologies of high temperature separation/recovery/reutilization of CO2. In the study, data collection, arrangement and comparison were made of various separation technologies such as the membrane method, absorption method, adsorption method, and cryogenic separation method. With the LNG-fired power generation as an example, the adaptable environment and effectivity were made clear by making models by a process simulator, ASPEN PLUS. Moreover, using this simulator, effects of replacing the conventional steam reforming of hydrocarbon with the CO2 reforming were made clear with the methanol synthesis as an example. As to the rock fixation treatment of high temperature CO2, collection/arrangement were made of the data on the fixation treatment of the CO2 separated at high temperature into basic rocks such as peridotite and serpentinite in order to clarify the adaptable environment and effectivity of the treatment. Besides, a potentiality of the fixation to concrete waste was made clear. 57 refs., 57 figs., 93 tabs.

  20. Fiscal 1997 report on the introductory study. Human behavior recognition evaluation technology; 1997 nendo sentan kenkyu hokokusho. Ningen kodo ninchi hyoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Importance of the human behavior technology was paid attention to to get true safety and comfortableness of life through adaptability of products/systems to all humans. In consideration of the social and technological background, the human behavior recognition evaluation technology avoids economic/social losses caused by accidents and troubles and also provides the safe life environment for living people including the aged. Further, the gist of the project was proposed to make it clear that it can give a course of making things from a viewpoint of development of products dealing with individuals (personal fit) and can give new added values and contribute to heightening of international competitiveness at the same time. Development is made of technology of dividing concrete behavior patterns into types and also accumulating them in usable forms at the time of product design and in emergency and of technology of measuring all the time information on human behaviors in daily life without restrictions and on site. Supporting technology is developed for making the most of behavior information of users for product design and in emergency. Effects of the spread are also estimated. 76 refs., 13 figs., 9 tabs.

  1. Recent development of melting process and criteria for jet engine alloys. Saikin no jet engine yo gokin no criteria to yosei gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Degawa, T. (The University of British Columbia, (Canada))

    1991-09-20

    Super-alloys and Ti alloy were taken up as key materials for jet engines to describe their design criteria and the current state in destruction mechanical approaches. Also, as a solution to improving the material reliability, the clean alloy melting technique was touched upon as to its current state. Changes in high-temperature creep life and tenacity in the super-alloys (directions in the improvement efforts) are shown. In the recent movements in the clean melting technique, attentions are drawn on the ingot melting method using a cold hearth as an excellent method. Discussions were given on sizes of defects in the materials that affect dynamic destruction of rotating bodies such as turbines, and the relations are shown between the initial permissible defect size and the yield stress in various types of super-alloys. 31 refs., 11 figs., 3 tabs.

  2. Fiscal 1996 investigational research on the chemical process technology using supercritical fluids; 1996 nendo chorinkai ryutai wo riyoshita kagaku process gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Importance was studied of making a research on the chemical process technology using the supercritical fluid. As for its effect on global warming, the amount of CO2 emission was compared during the operation between the conventional process and the process using the supercritical fluid, the CO2 reduction rate and amount were trially calculated, and a CO2 reduction of a several ten thousand ton scale in carbon conversion was predicted. As to hazardous materials and the reaction of waste retrieval, it was made clear that the process using the supercritical fluid was valid also for objects for which the chemical process used to be impossible, which indicates a possibility of the widening field of application. Concerning its effect on the energy conservation, energy reduction of several ten thousand tons in heavy oil conversion was predicted by replacing all the existing processes with supercritical fluids. Relating to the recycling, with the use of supercritical fluids, the process is possible which produces higher quality and yield and fewer unnecessary products such as char than the conventional process. 197 refs., 102 figs., 71 tabs.

  3. Research information network survey of innovative technology for the earth. 2; Chikyu kankyo taisaku gijutsu no kenkyu joho network chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In order to construct the information network system for a research of innovative technology for the earth, a prototype has been made. To draw necessary functions for the information network system, an information flow in a general research work is analyzed to classify it based on the functions. The information collecting function, information accumulating and sharing function, special information system for research, information providing function, and communication function of the net work correspond to the collecting information, accumulating information, being engaged in research, providing information, and communication of researcher`s actions, respectively. The services on network system supposed from these functions are the homepage search mailing list, intranet service, special information system for research, WWW Internet broadcasting, and BBS/news/conference tool, respectively. It was found that latest Internet technology enabled to construct easily controlled system environment for users and WWW would develop as a standard communication tool. 2 refs., 26 figs., 27 tabs.

  4. Research report of fiscal 1997. Survey on information networks for environment technology transfer; 1997 nendo hokokusho. Kankyo gijutsu iten joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    ICETT is one of the member organizations of APEC environment technology virtual center which established in Osaka in 1996 for active environment technology exchange between APEC countries based on a survey result obtained in fiscal 1995. ICETT began its information service in April, 1997, and completed useful prototype home pages which include the database composed of practical useful information on environment preservation technology of domestic factories and offices, and training information and local governments` approach cases to pollution control. In fiscal 1997, further survey was made, and the simulation software of a model process was also developed for training. Clean technology and energy saving technology strongly demanded by developing countries were surveyed to prepare a database including useful information for developing countries. A basic design software for bio-treatment of waste water was also prepared. The total number of home page accesses exceeded a predicted number for the first half year. 5 refs., 25 figs.

  5. Survey of the waste-fueled power generation introducing technology. Case study 1 (fiscal 1996); Haikibutsu hatsuden donyu gijutsu chosa nado. Case study no jisshi 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A case study on A city was conducted aiming at making a detailed manual for introducing the waste-fueled power generation. The study was made in terms of a large-capacity waste-fueled power plant, estimation of the waste amount considering wide-area processing, size of facilities, comparison of four types of combustion furnace, steam condition/seawater cooling/power generating efficiency, etc. As a result, the following were proposed: As to the size of facilities, a capacity as large as possible is recommended in the light of the scale merit of costs of the waste-fueled power plant and final disposal site and the environmental preservation. Concerning the high efficient power generation, recommended are 450degC and 60-80 ata which are steam conditions for coping with high temperature corrosion. In respect to seawater cooling, the adoption is recommended making good use of locational conditions since the output energy increases by approximately 16%. Any furnace types including the fluidized bed furnace are equal. The amount of dioxin becomes below 0.1ng/Nm{sup 3} because of the control of furnace combustion temperature, residence time, catalytic desulfurization facilities, blowing of activated coal into the flue, etc. 172 figs., 78 tabs.

  6. Report on achievements in fiscal 1998. Development of a technology to measure biological molecular interactions; 1998 nendo seitai bunshi sogo sayo no keisoku gijutsu no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    It has been indicated possible in principle in recent years to measure biological molecular interactions with the molecules in the living state by combining the technologies called the co-focussing optical system and the fluorescence correlation spectroscopy (FCS). The FCS method is a method capable of analyzing concentrations, sizes, and inter-molecule interactions through detection of fluorescence fluctuation in single molecules in submicron zones. In spite of the FCS method being a very effective method to measure interactions in biological molecules, the technology has not reached a level that allows easy utilization under the present condition. The present research and development is intended to solve the technological problems in the FCS method in the co-focussing optical system, and perform as many research and development works as possible in a short time to establish a technological foundation that can be provided to bio-industrial and medical sites. Particularly, in order to make the utilization thereof possible in measuring biological molecular interactions in cells, a measuring technology using the bi-photon excited fluorescence correlation spectroscopy was established with an objective to reduce damages to cells and their internal micro organs, and minimize effects of interference signals from the own fluorescence. (NEDO)

  7. New energy technology development related database construction survey (wind power generation); Shin energy gijutsu kaihatsu kankei data shu sakusei chosa (furyoku hatsuden)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To arrange systematic data relating to new energy, the latest published data relating to the wind energy conversion systems have been collected and arranged. For the overview of wind energy conversion system, wind turbines with horizontal axis and vertical axis, specification of wind turbine, and conceptual figure of wind energy conversion systems are illustrated. For the installation examples, introduction development of wind energy conversion systems in the world is described for Japan, the USA, Germany, Denmark, Spain, Sweden, India, and Belgium. For the relevant legislation and support plan, relevant legislation for the introduction of wind energy conversion in Japan, support plan in Japan, and support plans in foreign countries are described. Prices of wind turbines by wind turbine makers in the world, construction cost by Japanese makers, basic term, and subsidiary company and organization are shown

  8. Study of seismic data acquisition using physical modeling system; Butsuri model jikken sochi wo mochiita data shutoku gijutsu ni kansuru kento

    Energy Technology Data Exchange (ETDEWEB)

    Tsukui, R.; Tsuru, T. [Tech. Research Center, Japan National Oil Corp., Tokyo (Japan); Matsuoka, T. [Japan Petroleum Exploration Corp., Tokyo (Japan)

    1996-05-01

    The Physical Modeling System introduced into the Technology Research Center, Japan National Oil Corporation, and data collected by use of the system are presented. The Physical Modeling System is 10,000 times smaller than the real one, comprising a water tub section, measuring device section, and control section, etc. The water tub section comprises a tub for housing the model, transducers for transmitting and receiving vibration, controllers, etc. The water tub measures 1.8{times}1.2{times}0.9m. The model used in the experiment is an `inclined multilayer model` with each of its six layers pinching out toward the top, and is usable for the comparison of various migration methods. In one case in the records, reception was made at 184 reception points deployed at intervals of 3mm, when the minimum offset was 15mm and the maximum offset 564mm. Nothing very obvious was observed when the ordinary overlapping of DMO and CDP was applied to this record, which suggests that pre-overlapping migration treatment is required. 5 figs.

  9. Precision measuring technique and its application to the profile measurement of aircraft structure model; Seimitsusokutei gijutsu to sono kokuki kozo mokei keijo sokutei eno oyo

    Energy Technology Data Exchange (ETDEWEB)

    Someya, T.; Inoue, I. [National Aerospace Laboratory, Tokyo (Japan)

    1994-12-01

    This paper introduces some measuring apparatuses which seem to be necessary for the precision measurement and some basic matters regarding measuring techniques for readers who are concerned with precision measurement. In the second half, this paper mainly explains the measurement of two-and three-dimensional coordinates by many examples of profile measurement which were done using a wind tunnel testing aircraft model. 11 refs., 300 figs., 97 tabs.

  10. Construction of stiffening girder for Akashi straits bridge. Installation with use of latest bridging technology; Akashi kaikyo ohashi hoko keta kasetsu koji. Saishin kakyo gijutsu wo kushishite kasetsu

    Energy Technology Data Exchange (ETDEWEB)

    Oe, S. [Honshu-Shikoku Bridge Authority, Tokyo (Japan)

    1996-05-25

    The Akashi straits bridge is the Kobe-Naruto route of the bridge connecting Honshu and Shikoku; the bridge links Kobe in Hyogo prefecture with Awaji Island and, when completed, it will be a 3-span 2-hinge suspension bridge with the longest center effective span in the world. This report centers on the outline of the construction of stiffening girders for the Akashi straits bridge and especially on the characteristics of the engineering method newly employed. As the method of installing the stiffening girders, an overhang installation of face bars was employed which was a time-tested method. As the installing direction of the side spans, it was decided to install them from the anchorage to the tower. At the beginning, six large block installations were performed. A special balance was developed for the installation of short hanger parts for the purpose of enhancing safety and reduction in the process. A rubber-tired transporting truck was adopted for transporting members of framework on the bridge. GPS survey was used as a method for surveying the configuration. The subject engineering method was based on the construction of suspension bridge stiffening trusses in the past Honshu-Shikoku connecting bridge and reinforced with the improvements as above. Since the bridge is in the middle of construction, a subsequent report will hopefully be made on the actual results of the installation and the spanning after the closure. 8 figs., 2 tabs.

  11. Development of the super coke oven for productivity and environment enhancement toward the 21st century (SCOPE 21); Sekitan kodo tenkan cokes seizo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Sugiyama, T. [Center for Coal Utilization, Japan, Tokyo (Japan); Nakashima, Y.; Nishioka, K.; Otsuka, J. [The Japan Iron and Steel Federation, Tokyo (Japan)

    1996-09-01

    Serious shortage is predicted on cokes for blast furnaces in the first half of the 21st century. In order to deal flexibly with the fluid world market in the future, it is necessary to have a technology developed, by which coals from coking coal to non-coking dust coal can be used. The Japan Iron and Steel Federation and the Center for Coal Utilization, Japan are working on research and development of a new process with enhanced environmentality and economy (SCOPE 21) as a coke manufacturing process to respond to the requirements arisen from the above situation. The process is assessed basing on basic technological seeds such as rapid coal heating and high-speed carbonization and reformation of middle to low temperature cokes. The organizations are moving forward an eight-year development program which has started in fiscal 1994. This paper reports the summary of the development, and results of investigations and researches performed during fiscals 1994 and 1995. Rapid heating tests, middle to low temperature coke reformation tests, and tests for plug transportation of high-temperature coal have been performed. It has been verified, for example, that rapid coal heating can improve coke strength. The development work is being promoted toward grain size distribution and upscaling problems. 5 refs., 16 figs., 2 tabs.

  12. Generation characteristics of photovoltaic power generation equipment at TEPCO R and D center; Gijutsu kaihatsu center taiyoko hatsuden setsubi no hatsuden tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Amano, K.; Natori, K. [Tokyo Electric Power Co. Inc., Tokyo (Japan)

    1997-11-25

    Solar battery arrays are installed at different tilt angles for actual measurement in an experiment conducted by TEPCO (Tokyo Electric Power Company, Inc.) Research and Development Center for the examination of their power generation characteristics. Arrays of polycrystalline silicon solar battery modules are positioned facing a direction +7 degrees swung from the south on the Center rooftop and verandah, and they are installed at tilt angles of 0, 30, 60, and 90 degrees. An analysis of system characteristics is conducted, and findings mentioned below are obtained. In fiscal 1996, the highest utilization factor of a yearly average of 11.3% is attained with the ones tilted at 30 degrees. As for the utilization factors at the other angles, they are 10.2% at 60 degrees, 8.8% at 0 degrees, and 8.0% at 90 degrees. The integrated design coefficient remains approximately constant irrespective of the different tilt angles of 0, 30, and 60 degrees. The overall design coefficient of the 90 degree-tilted array installed on the verandah is found to be 0.75, which is higher than those exhibited by the others. Appropriate routes of wirings for modules should be worked out to avoid the ill effect of the shadows of steel towers. 2 refs., 11 figs.

  13. Achievement report on research and development of medical and welfare equipment technology. Optical tomographic imaging method; Iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Hikari danso imaging system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    The aim is to develop a method of processing oxygen concentration distribution in human organs into an image by computed tomography using near infrared rays capable of transmitting through living tissues. Since the photoabsorption spectra of hemoglobin etc. in blood vary according to the degree of their oxidation, an oxygen concentration level is determined by measuring the magnitude of the variation. In the imaging method named in the title, the object is irradiated with picosecond-level near infrared pulses from all directions successively, the pulses after transmission through the object are measured at all directions at a picosecond-level time resolution, and the distribution of pulse scattering and absorption characteristics are subjected to algorithmic calculation, the outcome is converted into oxygen concentration levels, and an image is obtained. A 64-channel time resolution measurement system is constructed, and is applied to living tissue models (phantoms) and animals, and an image is obtained and evaluated. On the basis of the result, a patient is examined for clinical evaluation, and an image reflecting the distribution of variations in hemoglobin oxygen concentration is obtained for the head of the adult patient. A spatial resolution of 1cm is achieved in case of a phantom 10cm in diameter. In the case of 64 channels, measurement takes approximately 20 minutes and mapping image data measurement takes approximately 7 minutes. (NEDO)

  14. Development of air conditioning system and labor saving technology for efficient hydroponic cultivation; Konoritsuna suiko saibai no tame no kucho to shoryokuka gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Okano, T.; Terazoe, H.; Shoji, K. [Central Research Institute of Electric Power Industry, Tokyo (Japan); Yonezawa, K.; Otani, F. [Chugoku Electric Power Co. Inc., Hiroshima (Japan); Sekiyama, T.; Kosakai, K.; Sato, H.

    1997-06-01

    Equipment which made experiments on air conditioning and hydroponic cultivation possible was set up at the technical research center of the Chugoku Electric Power Co., to study an air conditioning system using night power and energy saving technology for the cultivation. Vegetables suitable to the cultivation were selected. For air conditioning, adopted was a water heat storage air conditioning system using night power. The space between the shade curtain and the greenhouse roof was ventilated to prevent increase in cooling load caused by rise in curtain temperature. Moreover, the cultivation equipment was covered with transparent vinyl film to cool the inside of the equipment. The hydroponic cultivation equipment was trially manufactured which makes the continued production by one worker possible. The cultivation of spinach, leaf lettuce and chingensai throughout the year became possible. The yield of chingensai reached the target, but those of spinach and leaf lettuce were approximately 70% of the targets. Vegetables to be produced in the air-conditioned greenhouse by hydroponic cultivation are thought to be those that can have added values such non-pesticides and ingredients, young plants which were increased by cutting or tissue culturing, etc. 5 refs., 19 figs., 8 tabs.

  15. Investigational research on CO2 isolation technology in fiscal 1995; 1995 nendo nisanka tanso no kakuri gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper studied present technical subjects and future study subjects of the CO2 isolation technology in order to clarify technical and social problems and the developmental subjects of the CO2 isolation technology and related technologies for separating/concentrating CO2 emitted in relation to quantity consumption of fossil fuel and storing it in ocean or underground. Main items for the study were: (1) investigational study of the technology of CO2 ocean storage, (2) investigational study of environmental effect assessment in storing CO2 in ocean, (3) investigational study of the technology of CO2 ocean storage, etc. Technologies required for the ocean isolation were arranged such as CO2 storage, injection, dispersion technique, CO2 behavior simulation, and the developmental subjects were extracted. Further, in the deep-sea bottom storage method, a simulation to calculate the range of PH effects was conducted presuming the specified amount of CO2 and applying known physical values, and evaluation of the CO2 ocean discharge/solution method was made. A method was also studied for experiments on water bacteria and benthos. 127 refs., 102 figs., 81 tabs.

  16. Data book on new energy technology in FY 1997. Wind power generation; Shin energy gijutsu kaihatsu kankei data shu sakusei chosa. Furyoku hatsuden

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    It is an urgent necessity for Japan to promote the technological development and accelerate the introduction and diffusion of new energy. In order to diffuse and enlighten the introduction of new energy technology efficiently, it is necessary to compile various information regarding new energy in a comprehensive and systematic way, and formulate a database. Aiming at the systematic formulation of data on new energy, this survey focuses on the field of wind power generation system (WPS) and provides a collection of the latest published data on WPS, particularly regarding the worldwide installed wind power capacity, support plan and government policies, current situations of WPS market, and major technical characteristics of typical wind turbines. This report consists of the significance of wind energy, world market of wind turbines, government policies, international wind energy development, subsidies for wind energy, procedures of wind turbine system installation, governmental measures for wind energy development, subsidiary companies and organizations, basis of wind energy, and Japan`s wind energy development in 1997

  17. Achievement report for fiscal 1997. Technological development for practical application of a solar energy power generation system/development of technology to manufacture thin film solar cells (development of technology to manufacture applied type thin film solar cells with new construction) (development of technology to manufacture micro light collection type solar cells); 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu, oyogata shinkozo usumaku taiyo denchi no seizo gijutsu kaihatsu (micro shukogata taiyo denchi no seizo gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    These technological developments are intended to demonstrate module efficiency of a micro light collection type solar cell of 15% by fiscal 2000, and obtain prospect on the module manufacturing cost of 140 yen per watt. Discussions given during fiscal 1997 are as follows: development has been performed on a design method to decide construction of a non-tracking micro light collection type module; in the state of cells being integrated on the module, the cells are arranged minutely and discretely, whereas, with discussions on a method to form them and assessment of the optical system as the main objective, single crystal silicon solar cells with a size smaller than 5 mm were fabricated on a trial basis; problems of forming micro cells by using the wafer cutting process were clarified; micro cells operating on light collection were fabricated trially to extract technological problems in light collecting operation and discuss technical problems in mass production; and development was performed on an evaluation method to analyze the cells' light collecting operation, and discussions were given on a method to estimate power generation amount from the light collection type modules. (NEDO)

  18. Investigation on innovation of technology development by means of strategic energy intelligence; Energy senryakurontekina approach ni yoru gijutsu kaihatsu no kakushin ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of developing the future innovative energy technology, the paper described a strategic point of view. Effects of the energy issue are remarkable on the next generation and thereafter as seen in the finite of energy resource, global-scale environmental changes, the increasing energy demand, natural/social influences of large-scale technology development. If the technological development is going on in the same way as until now, there will appear limits. Relating to the strategies, to seek what energy should be among the strategies, it is necessary to consider not only global-scale problems but particular conditions in Japan (self-sufficiency, international cooperation, creativity, etc.) Also, wisdom and technique are necessary to attain it. Technological development in a wide sense plays a major role in the energy strategy. Technology innovation must be advanced according to the energy strategy. Integrating ideology into the development of energy technology and selecting therefrom developmental subjects which meet the purpose, required is the construction of the energy system with high flexibility and functionality. Looking at the conventional way of thinking from a different angle and posing a future pull plan, Japan should show leadership to the world. 20 refs., 25 figs., 8 tabs.

  19. Project to promote the development of global environmental industry technology. Feasibility study of research exchanges; Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In fiscal 1995, three teams were organized to study the following subjects: plant genetic and cellular engineering in relation to drought stress; simulation models of global environment for accurate assessment and prediction; the APEC Virtual Center for environmental technology exchange. The team studying plant genetic and cellular engineering in relation to drought stress visited the Department of Botany, Hebrew University of Jerusalem, Israel, the Jacob Blaustein Institute for Desert Research, Ben-Grunion University, Israel, the Department of Biochemistry and the Office of Arid Lands Studies, Arizona University, the U.S. to survey the present and future trend of the study and feasibility of research exchanges. The team studying simulation models of global environment for accurate assessment and prediction visited Yale University, Massachusetts Institute of Technology, Electric Power Research Institute, and Battle Research Institute in the U.S. to survey feasibility of research exchanges. The team studying the APEC Virtual Center for environmental technology exchange visited institutes in ASEAN countries to survey needs for the Virtual Center. 312 refs., 74 figs., 17 tabs.

  20. Achievement report on research and development of medical and welfare equipment technology. Esophageal speech aid system; Iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Shokudo hassei hojo sochi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Research and development of an esophageal speech aid system is carried out to assist patients with the vocal chords lost in pharyngectomy. The goal is to develop a device to enable people, who have had their pharynges removed but can communicate under noiseless circumstances, to communicate easily even in the noisy street. The study involves the development of a voice pickup means, speech signal processing technology, integrated circuit dedicated to the present purpose, esophageal speech signal analyzer, and improvement on the user's comfort. The effort results in a highly directional microphone and a small, high-output loudspeaker. Several real-time signal processing algorithms are developed, including one related to the bandwidth division type analysis and synthesis technique that ensures stable voice conversion. An esophageal speech database is built. A portable esophageal speech aid system is manufactured by way of experiment, which is equipped with the functions of analog simple voice magnification and digital voice conversion. This device serves concurrently as a telephone speech aid system. (NEDO)

  1. Fiscal 1995 verification survey of geothermal exploration technology. Report on a deep geothermal resource survey; 1995 nendo chinetsu tansa gijutsu nado kensho chosa. Shinbu chinetsu shigen hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    For the purpose of reducing the risk of deep geothermal resource development, the paper investigated three factors for the formation of geothermal resource in the deep underground, that is, heat supply from heat source, supply of geothermal fluids, and the developmental status of fracture systems forming reservoir structures. The survey further clarified the status of existence of deep geothermal resource and the whole image of the geothermal system including shallow geothermal energy in order to research/study usability of deep geothermal resource. In the deep geothermal resource survey, drilling/examination were made of a deep geothermal exploration well (`WD-1,` target depth: approximately 3,000-4,000m) in the already developed area, with the aim of making rationalized promotion of the geothermal development. And the status of existence of deep geothermal resource and the whole image of the geothermal system were clarified to investigate/study usability of the geothermal system. In fiscal 1995, `WD-1` in the Kakkonda area reached a depth of 3,729m. By this, surveys were made to grasp the whole image of the shallow-deep geothermal system and to obtain basic data for researching usability of deep geothermal resource. 22 refs., 531 figs., 136 tabs.

  2. Leading research report for fiscal 1998. Life landscape performance evaluation technology (Landscape Frontier); 1998 nendo sendo chosa kenkyu hokokusho. Seikatsu keikan seino hyoka gijutsu (land scape frontier)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For the formulation of guidelines for the construction of an appropriate landscape in the 21st century for the creation of 'landscape industry' in a sustainable society, researches were conducted for the development of landscape materials to constitute living circumstances equipped with 'life landscape' and of technologies for evaluating them. In the landscape designing system subcommittee, the current states and problems of landscape designing systems were analyzed and problems to solve were clarified, these problems involving systems and institutions, people and collaboration, formation of a consensus, systems for production and distribution, etc. In the landscape materials subcommittee, a 'landscape cell' concept in which a life space is the unit was employed in discussing the needs for landscape materials to meet and in extracting the seeds the industry was able to offer for improvement on landscape. In the landscape evaluation subcommittee, the history and today of landscape were reviewed to define what was to be respected in the development of evaluation techniques, and guidelines were extracted towards landscape materials development and landscape industry promotion. In addition, a Landscape Frontier symposium was held. (NEDO)

  3. Technical trend and prospect for wafer cleaning on LSI manufacturing process; LSI seizo kotei ni okeru weha senjo gijutsu no saikin no doko totenbo

    Energy Technology Data Exchange (ETDEWEB)

    Hiratsuka, Y. [Dan Science Co. Ltd., Tokyo (Japan)

    1996-01-31

    Presently used cleaning process of silicone wafer is based on the modification of so called RCA method from the knowhow point of view, presented by W.Kern and others 25 years ago. On the other hand, with the progress of development of element for next generation, it was already clarified to be required on the process, demanded for high degree control of silicone surface. When considered the practical measure for this, there is a movement towards the establishment of new silicone wafer cleaning concept for new generation instead of making difficult process by precise RCA cleaning. One of the new proposed method is IMEC cleaning. Further, in Tohoku University, new cleaning process, alternative to RCA method is proposed, in which treatment of all chemicals is carried out at room temperature, types of chemicals used for cleaning are limited to minimum and also, concentration of these chemicals is kept as minimum as possible, amount of used superpure wafer is saved by effective recycling and reutilization of spent chemicals. With these tecnologies, there has appeared the sign for new development for cleaning technology. 36 refs., 28 figs., 6 tabs.

  4. Research of environmental bioecosensing technology using ecological information. Part 2; Seitaikei joho ni yoru kankyo bio ecosencing gijutsu ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Basic considerations of exploring and cultivating environmental reporter organisms are summarized. Mechanism of genetic engineering amplification and molecular biological amplification, and approach to combining them to a hardware as a bioindicator system are investigated. For the current status of molecular biological measurement technology for measuring ecological environment and its application, environmental diagnosis from a phyropathological viewpoint, environmental diagnosis using microorganisms, test fabrication of genetic sensor, and overseas examples of environmental monitoring network are described. For the application of ecological information and functions for developing innovative environmental remediation technology, issues and potential areas for research and development regarding the bioremediation technology in which the US has achieved a progress for the benefit of soil environment remediation are summarized. For the phytoremediation, an area of bioremediation, the metabolism of microorganisms which live in the rhizosphere, and the technology for controlling the microorganisms in the soil through plants are investigated. 66 refs., 50 figs., 17 tabs.

  5. Fiscal 1997 survey report. Survey on the innovative well drilling technology; 1997 nendo chosa hokokusho. Kakushinteki kosei kussaku gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In the geothermal drilling, reduction of the cost of well drilling is an important subject for technical development. The geothermal resource development tends to be made at higher temperatures and at deeper wells. In the present drilling technology, the cost is rising with the exponentially increasing depth and temperature, and there is also occurring the technical limit. Accordingly, the survey clarified the limit of the present drilling technology/cost to point out the research trend of the drilling technology as substitute for the present one, possibilities of the introduction, and the R and D target and subjects. As to latest drilling systems abroad and in Japan, the following were surveyed to study and extract promising technologies and systems: improvement/application of drilling equipment/materials (enhancement of heat resistance of the main drilling equipment, etc., cooling effects of top drive, heat resistance verification of MWD tools, PDM, tricone bits, multi-stage cementing tools, etc.), heightening of drilling rates, trend surveys of slim hole drilling, control drilling, well maintenance/workover, and well design technology. 68 refs., 73 figs., 40 tabs.

  6. Research and development of photovoltaic power system. Research on low temperature deposition of polycrystalline thin films; Taiyoko hatsuden system no kenkyu kaihatsu. Teion seimaku gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Sato, K. [Tokyo Univ. of Agriculture and Technology, Tokyo (Japan). Faculty of Technology

    1994-12-01

    This paper reports the result obtained during fiscal 1994 on research on a technology of low temperature deposition of polycrystalline thin films for solar cells. This research used ITO coated glass substrates, on which CdS was accumulated to a thickness of about 100 nm by using the CBD process, and over this deposition a CuInSe2 film was formed at 300{degree}C by using the ion cluster beam (ICB) process. The manufactured solar cells with a glass/ITO/CdS/CuInSe2/Au structure had an efficiency of 2%. In manufacturing a CuGaSe2 thin film by using the ICB process, effects of acceleration voltage relative to cluster beams and ionization current were investigated. It was found that the film morphology, the result of analysis by using X-ray diffraction, and the electric conductivity are sensitive to the ionization current. From these findings, an optimum film forming condition was derived. A CuGaSe2 thin film was manufactured by using the ICB process over a Cds thin film deposited by using the CDB process. Both of the surface morphology and X-ray diffraction patterns of the film did not show a large change, indicating a possibility of manufacturing cells with a reverse structure. Effects of heat treatment on CuInSe2 monocrystals were evaluated by using ESR and FTIR. 6 figs., 1 tab.

  7. Technological development for super-high efficiency solar cells. Survey on the commercialization on analysis; Chokokoritsu taiyo denchi no gijutsu kaihatsu. Jitsuyoka kaiseki ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the survey results on analysis of super-high efficiency solar cells for practical use in fiscal 1994. (1) On the survey on crystalline compound solar cells, it was pointed out that the present study target is III-V compound semiconductor solar cell, and efficiencies of 36-39% are theoretically expected by use of two-junction cells. (2) On structure of super-high efficiency solar cells of 40%, selection of upper and lower cell materials for multi-junction cells, high-efficiency tandem Si solar cells, and the merit and possibility of light collection operation were surveyed, and their issues were discussed. (3) On physical properties of mixed crystalline semiconductors and characteristic evaluation of solar cells, impurities, trap center, minority carrier life, and applicability of supper lattice structure to high-efficiency solar cells were surveyed. (4) On fabrication technology of compound semiconductor solar cells, various problems of and approaches to electrode formation and antireflection film technologies, the meaning and issues of thin film substrate technology and continuous process, trial calculation of costs, safety, and resource problem were surveyed.

  8. Utilization of statistical table for waves in North-west Pacific Ocean and a long-term estimation on hull responses; Seihoku Taiheiyo haro tokeihyo no riyo to sentai oto choki yosoku

    Energy Technology Data Exchange (ETDEWEB)

    Shinkai, A. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1997-10-01

    Designing a vessel to sail oceans for an extended period of time requires statistical estimation on different hull responses to waves. To meet the requirement, it is necessary to accurately identify hydrographic conditions (particularly waves) which are considered to be encountered by the vessel. This paper makes clear the statistical characteristics of the wave statistics table presented by Fang et al, and compares them with other processes for discussion. This statistics collection is based on data collected in China, Hong Kong and Japan, including those collected in the Sea of Japan, the Yellow Sea, the North Sea, the East China Sea and the South China Sea. It was found that these data provide results slightly lower than the long-term estimation values derived from data of the global wave statistics (GWS) prepared by Hogben et al. The cause for this was found attributable to the format of the statistical data, especially setting of wave height classes. However, since the data provided by Fang et al include items of detailed information on small sea areas near the Chinese coast lines, the data are thought to provide useful information source in investigating long-term hull response characteristics relative to spatial spread of the sea areas in the North-west Pacific Ocean. 15 refs., 5 figs., 2 tabs.

  9. FY 1995 report on verification of geothermal exploration technology. Development of fracture reservoir exploration technology (development of seismic exploration); 1995 nendo chinetsu tansa gijutsunado kensho chosa. Danretsugata choryuso tansaho kaihatsu (danseiha riyo tansaho kaihatsu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This report provides the development of new exploration technology using elastic waves, such as reflection seismic survey, VSP, and seismic tomography, for precisely characterizing subsurface fractures in geothermal reservoirs. In order to investigate and improve the effective data acquisition and analysis methods for detecting a fault type of fractures, an experiment of a seismic tomography method was conducted using wells drilled in the Ogiri geothermal field, Aira-gun, Kagoshima Prefecture. An experiment of propagation characteristics of piezo type underground seismic source in the volcanic field was also conducted as a trend survey of underground seismic sources. The fracture type in the model field was systematically analyzed by measuring the core samples obtained in the demonstration test field through remanence measurement, fluid inclusion measurement, and zircon measurement using test equipment, and by analyzing results obtained from cores and results of seismic tomography obtained from the wells. Based on these results, the effectiveness and practical application of exploration methods using elastic waves were investigated. 80 refs., 250 figs., 49 tabs.

  10. Development of hydrothermal power generation plant. Development of binary cycle power generation plant (development of 10 MW-class plant); 1995 nendo nessui riyo hatsuden plant nado kaihatsu binary cycle hatsuden plant no kaihatsu. 10MW kyu plant no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    A 10 MW-class binary cycle power generation plant has been developed using a down hole pump (DHP) which exchanges the hydrothermal energy with secondary medium in the heat exchanger. For constructing the plant at Kuju-machi, Oita Prefecture, site preparation works, foundation of cooling tower, reconstruction of roads, and survey on environmental influences were conducted. To investigate installation and removal methods of DHP, a geothermal water pump-up system, current status of the binary cycle power generating system in the USA was surveyed. In this survey, a trailer mounting handling machine was inspected. Based on the survey results, a simple assembled, easy-installation type handling equipment was designed. In addition, the replacement work for motor connector joint of DHP and the strength of coil end were improved. Construction and method allowing reuse of the motor cable were considered by improving the cable and cable end portion. The air tight soundness of incoloy corrugate sheath was confirmed. Finally, a reproduction system for waste oil of DHP bearing oil was investigated. 106 figs., 52 tabs.

  11. Fiscal 1998 research report. Study on the feasibility of microorganism biotechnology for effective use of environmental pollutants. Pt. 2; 1998 nendochosa hokokusho. Kankyo osen busshitsu no shigenka no tame no biseibutsu bio technology riyo kanosei ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Study was made on the feasibility of microorganism biotechnology for effective use of environmental pollutants and unused resources. Microorganisms and microorganism enzymes for decomposing lignocellulose were viewed, and uses of hydrolysis products were summarized. Production of microorganisms applicable to fodder, composting, and production of energy sources (methane, hydrogen, ethanol) were studied. Use of vegetable fiber residues such as beer lees as fungus cultivation medium and conversion to valuable substances were also studied. Microorganisms treatment (MT) of wastes in fats and oils industry was summarized. Effective use of MT of protein waste from marine products was studied. MT of manures with the greatest impact on environment as livestock waste was summarized. The necessity of separate collection of domestic wastes, and composting and methane fermentation of kitchen garbage were reported. The feasibility of MT of plastic wastes, and decomposition of halogenated methane with high toxicity were also studied. (NEDO)

  12. Synthetic studies on axial chiral biaryls and functional materials utilizing arene-metal complexes; aren kinzokusakutai no tokusei wo riyo shita jikufusai biariru, oyobi shinki kinosei zairyo no gosei kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Uemura, Motokazu [Osaka Prefecture University, Osaka (Japan). Faculty of Integrated Arts and Sceinces

    1999-12-16

    Axially chiral biaryls compounds are of importance not only as chiral ligands for asymmetric reactions but also as biologically active natural products, e. g., korupensamine, michellamine and vancomycin. (Arene) chromium complex exists in two enantiomeric forms based on a planar chirality. Axially chiral biaryls were stereoselectively prepared by palladium(0)-catalyzed cross-coupling of (aryl halide)Cr(CO){sub 3} complexes with arylboronic acids. This method was applied for the total synthesis of antimaralial agent korupensamine A, naphthyltetrahydro-isoquinoline alkaloid. Furthermore, chiral 1,2-diols and diamines are important compounds for asymmetric reactions. These enantionerically pure 1,2-diols and 1,2-diamines were stereoselectively prepared by pinacol coupling of planar chiral chromium complexes of benzaldehydes and benzaldimines with samarium iodide. Moreover, non-biaryl axial compounds, N,N-dialkyl 2,6-disubstituted benzamides were synthesized in enantiomerically pure form utilizing planar chiral arene chromium complex. (author)

  13. Research cooperation report for fiscal 1997 on the environment-friendly system for effectively utilizing water resources; 1997 nendo kankyo taiogata mizushigen yuko riyo system ni kansuru kenkyu kyoryoku itaku gyomu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This effort exerted in cooperation with the Philippines aims to solve problems related to water resources such as stable supply and pollution of water through developing a waste water treatment/water reuse system which is easy to operate and maintain, and low in price. The ultimate goal includes (1) the construction of a waste water treatment/water reuse system comprising an anaerobic reaction tank and activated charcoal absorption tower, easy to operate and maintain, and low in price, (2) the employment of goods procurable in the Philippines, the goods including carriers for use in the anaerobic reaction tank, microbes for use in both aerobic and anaerobic reaction tanks, and activated charcoal for use in waste water reutilization, and (3) the establishment of optimum operating conditions for the waste water treatment/water reuse system by use of a pilot plant and the transfer of operating and managing techniques to the Filipino counterpart. In this fiscal year, investigations are conducted to disclose the actualities of waste water treatment and water consumption by primary industries in the vicinity of Laguna de Bay, and the waste water to be the object of study and the place of pilot plant installation have been selected. Also conducted are investigations into the carrier, microbe, activated charcoal, etc., for use in the anaerobic reaction tank. (NEDO)

  14. FY1998 report on a survey related to joint utilization of welfare device development data using an international network; 1998 nendo kokusai network ni yoru fukushi kiki kaihatsu data no kyodo riyo ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A survey was made in relation with joint utilization of welfare device development data using an international network. Developing welfare devices requires data from ergonomic and medical systems, while the cope of the objects is wide, and the kinds are various. For proliferation of welfare devices, system compatibility evaluation including that on using environment is important, including living environments that are different by countries. The present survey has identified how data for aged, handicapped and help-needing persons are accumulated and utilized in research organizations in America and Europe for both of the ergonomic and medical areas. The survey also investigated major academic societies in overseas countries, and collected database and academic network information that support the advanced research and development. At the same time, investigations were also made on organizations and corporations who are moving forward the efficient data utilization. Welfare device and service information providing systems in Japan were investigated to compare them with the trends in other countries. Conceptions and methods were compiled to utilize data internationally and jointly. Database models for device development were considered, and a proposal was made on structuring a research and development supporting database, and the operation method thereof. (NEDO)

  15. Survey report of FY 1997 on the feasibility of microbial biotechnology for reuse of environmental pollutants; 1997 nendo chosa hokokusho (kankyo osen busshitsu no shigenka no tame no biseibutsu bio technology no riyo kanosei chi kansuru chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    An investigation was conducted with the aim of elucidating the foundations for effective utilization of environmental pollutants or unused resources which are likely to be causal substances of environmental pollutants, as resources, using biotechnology. Composting of agricultural waste, production of microbial mycelium proteins and microbial fermentation materials were suggested as main examples of effective utilization of unused resources by microorganisms. Selection of active microorganisms in the livestock waste, clarification of the mechanism of action and the establishment of treatment conditions are essential to new developments in this field. In the field of marine products industry, it was pointed out that the recycling of waste using microorganisms and enzyme treatment is the most promising approach to the effective utilization of resources. In the field of food industry, applications as the culture media for mushrooms, for enzyme production and for the production of physiologically active materials as well as fuel were clarified. Was also pointed out the significance of studies on the microorganisms and enzymes in resources containing cellulose, hemicellulose and lignin, and the waste from these resources, lignocellulose. Were also proposed the composting of household waste, methane fermentation, and fermentative production of organic acid and hydrogen from waste. Possibility and significance of fermentative production of organic acid from sewage sludge were suggested. 314 refs., 46 figs., 33 tabs.

  16. Study on electrical monitoring of fill-up improvement. Utilization of resistivity data for soil compaction management; Hiteiko mitsudo kanri ni kansuru kisoteki kenkyu. Moritsuchi seko kanri eno hiteiko yuko riyo

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, N.; Hiramatsu, W. [Dai Nippon Construction, Gifu (Japan); Sugano, T. [Kyoto University, Kyoto (Japan). Faculty of Engineering

    1996-10-01

    At present, measurement of wet density and water content by radio isotope (RI method) is used for filling management. It is supposed for filling in road construction that putting-out thickness of banking material reaches nearly 1m in the future rapid construction, however, use of RI method is difficult because of inserting and installing of a radiation source rod, large measuring apparatus, and the legal regulation on radioactivity intensity. Application of resistivity measurement was thus considered. Since resistivity has the same parameter as compaction curve, and monotonously decreases with an increase in water content by volume, it is applicable as construction management index. The management reference of resistivity (Rm) is set by plotting of a compaction curve and corresponding resistivity curve, determination of the reference resistivity (Ro) corresponding to a maximum dry density and optimum water content ratio, and setting of the allowance to Ro according to soil or application. It was clarified that Rm is applicable as set for every filling material. 1 ref., 10 figs., 2 tabs.

  17. Utilization of two-way multicore cables and comparison of various electrode configurations in electrical prospecting; Denki tansa ni okeru sohokogata tashin cable no riyo to kakushu dekyoku haichi no hikaku

    Energy Technology Data Exchange (ETDEWEB)

    Takakura, S. [Geological Survey of Japan, Tsukuba (Japan); Matsushima, J. [The University of Tokyo, Tokyo (Japan). Faculty of Engineering

    1996-10-01

    For more precise electrical prospecting, the new multicore cable was developed to allow high-density measurement by conventional equipment. Since conventional multicore cables are inferior in cost, length and weight, the new cable is composed of an n-conductor cable, two n-conductor male connectors and n lead wires. For connection of the multi-conductor cable and lead wires, cable sheath is peeled at n points at specific intervals. Sheath of the k-th conductor is peeled at k-th point from the terminal, and restored for insulation after connection of the conductor and lead wire. The male connectors are attached to the both ends of the multi-conductor cable. Since this two-way type cable can be used at every end, the measuring equipment can measure at one divisional point after another of a long measuring line while shifting the equipment from one point to another. All measurements are perfected only with two short cables. Resistivities were successfully measured along the long measuring line of 480m long with 97 electrodes arranged at intervals of 5m. Various electrode configurations were also compared. 1 ref., 4 figs., 2 tabs.

  18. Recent trends in computer application in industrial fields and how to apply its technology to oil drilling field. Tasangyo deno computer riyo no genjo to kussaku sagyo eno oyo no kanosei

    Energy Technology Data Exchange (ETDEWEB)

    Matsuo, Keisuke

    1989-09-01

    This report looks back on the 30 year history of computers and plant automation, and suggests the way to apply computers to the field of drilling. Recent trends are distribution of controls and contrarious integration. This integration is hierarchical integration to the upper level by integrating process instrumentation, electricity and computers. With the development of communication technologies, on-line, real time, and multi-task operations became possible. Furthermore, control technologies including the optimization by simulation were advanced, and breakdown diagnosis and operation support by artificial intelligence technologies were put to practical use. Possible application examples of these technologies to drilling works are a microcomputer which operates measurement controlling equipments according to the information on the drilling rig from mud loggers, a microcomputer which controls handling of equipments, and configuration of LAN including communication stations which can transmit inquiries into the progress of drilling or the way to handle troubles. 12 figs., 3 tabs.

  19. Study on synergistic effects of urban mixed-uses developments. Research into the complex uses of offices, shopping centers and hotels; Toshi kaihatsu no yoto fukugo ni yoru sojo koka no kenkyu. Office shogyo shisetsu hotel no fukugo riyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    Mori, N.; Ito, T. [Kajima Corp., Tokyo (Japan)

    1995-12-20

    Complex facilities consisting of offices, shopping centers and hotels were investigated to discuss synergistic effects of compounding the different uses. The investigations included an investigation on passing behaviors and traffic amount among facilities of different uses around and inside the complex facilities, a questionnaire survey on visitors for their composite utilization, impression and evaluation of the facilities and another questionnaire survey on office workers for their composite utilization of the facilities inside and outside the complex facilities. The result of analyses using simple calculations and multi-dimensional measure methods revealed the following points: improvement on images of the whole facility as a result of strong customer collecting power of the commercial facilities, support effects on hotels and malls, roles and utilization patterns of commercial facilities, hotels and various facilities existing in peripheral areas that function to support office works, and roles of open squares and malls that coordinate and integrate the facilities of different uses and promote passing activities. It was also observed that resident time is extended as a result of composite utilization, and that the shift in peak time of the number of people utilizing the commercial-based and office-based facilities results in more efficient utilization of parking lots and restaurants. 1 ref., 9 figs., 2 tabs.

  20. Analysis on recreational development and deforestation due to accessibility improvement in the suburban areas; Kotsu kaizen ni kiinshita kanko chiiki no shizenteki tochi riyo no henka ni kansuru bunseki

    Energy Technology Data Exchange (ETDEWEB)

    Doi, K. [Tokyo Institute of Technology, Tokyo (Japan); Okamoto, N. [Japan Transport Economics Research Center, Tokyo (Japan); Murata, A. [Housing and Urban Development Corp., Tokyo (Japan)

    1997-07-20

    In the suburban areas, the abundance of natural resources is essential for recreational activities. However, it is often observed that the increase in recreational travelers causes the degradation of natural environmental quality. The purpose of this study is to analyze the impact of transport improvement on development and the consequent decrease of natural green areas in suburban areas. A method of LISREL is adopted for identifying the contribution of green conservation to recreational attractiveness and the causalities among degradation of green conservation and accessibility improvement. A simultaneous equations system of recreational travel demand and developers` strategy is modeled and adopted for assessing the impact of accessibility improvement on the depletion of green areas. 14 refs., 15 figs., 6 tabs.

  1. Environment-friendly type energy and coordinated community development project. Feasibility study for industrialization of the high efficiency waste-fired power generation system using CSD; Kankyo chowagata energy community keisei sokushin. Kokoritsu haikibutsu hatsuden (CSD riyo) jigyoka FS chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the current treatment of disused cars, valuable materials are recovered after scrapping them, and residual car shredder dust (CSD) is reclaimed. The load of land reclamation can be reduced by decreasing its volume and weight through incineration of combustibles in the CSD. Thermal energy obtained during the incineration can be converted into electric power. CSD-fired power generation plant has been planned, by which the obtained power is sold to electric power companies. It was assumed that the power generation plant is constructed at a certain city of Ibaraki Prefecture. Two cases of plant scales, i.e., 200 t/d and 400 t/d, were investigated by considering the collecting quantity of CSD fuel and the area of sites. The CSD fuel with 4,500 kcal/kg of lower calorific value contains rather high contents of chlorine and sulfur, which are around 3% and 1.6%, respectively. Therefore, the system should have measures, such as the exhaust gas treatment, dioxin treatment, and prevention of corrosion for high efficiency. It was concluded that about 300 t/d scale plant provides a feasibility. 27 refs., 21 tabs.

  2. Report for fiscal 1998. Joint research of environment-friendly system for effectively utilizing water resources; 1998 nendo hokokusho. Kankyo taiogata mizushigen yuko riyo system ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The research is conducted in cooperation with Industrial Technology Development Institute of the Philippines, and aims to solve water related problems such as unstable water supply and water quality pollution though developing a waste water treatment and recycling system which is easy to operate and maintain, low in cost, and usable in the Philippines. Fiscal 1998 is the second year of the project. Statistics are studied about the load that each industrial branch imposes on water for its pollution, and it is found that food manufacturers, paper pulp mills, and fiber dyeing plants are heavily responsible for water pollution. A method consisting of single-tower UASB anaerobic treatment and activated sludge treatment is applied as a water treatment process to Ram Food Products Corporation, and its optimization is studied. A removal rate 60% is achieved after a 12-hour treatment period at a COD (chemical oxygen demand) rate of 8g/liter/day. A method consisting of coagulating sedimentation and activated sludge treatment is applied to the waste water from a Solid Mill Corporation dyeing plant, when it is found that the water after ultimate treatment is almost colorless and that COD is 76mg/liter and BOD (biological oxygen demand) 13mg/liter, and these suggest that the waste water is recyclable. Since it is low in COD removing rate, the application of anaerobic treatment to high-concentration water after washing is not appropriate. (NEDO)

  3. 1998 research cooperation project. Research cooperation on environment-compatible type water resource effective-utilization system; 1998 nendo kankyo taiogata mizushigen yuko riyo system ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For the purpose of securing water stably and preventing water pollution in the Philippines, R and D were carried out on a wastewater treatment and water reclamation and reuse system which is easy to operate and maintain and low in cost through the research cooperation between the Philippine Industrial Technology Development Institute and Japan. According to the survey result of statistical data concerning water pollution load structure by industrial wastewater classified by the industry in the Philippines, enumerated are the food manufacturing industry, paper pulp manufacturing industry, and the textile dyeing industry as those greatly affecting water pollution in BOD exhaust and wastewater, etc. Consequently, with Ram Food Product Co. of vegetable processing and Solid Mill Co., of textile dyeing as plants to be studied, a wastewater treatment test was performed in a laboratory scale. From the result of the test, the pilot plant was basically designed to have 'anaerobic + aerobic treatment + tertiary treatment' for the treatment process, with an one-tank type UASB method used as the anaerobic treatment, with a sand filtration + activated charcoal treatment as the tertiary treatment, and with the cost effectiveness for water reuse set to be examined. (NEDO)

  4. Fiscal 1997 report on the cooperative research on the preservation and sustainable utilization of biological diversification; Seibutsu tayosei hozen to jizokuteki riyo nado ni kansuru kenkyu kyoryoku (1997 nendo hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Cooperative researches were conducted between Japan and Thailand, Indonesia and Malaysia for the purpose of the technology development to make developing countries themselves preserve bioresources existing in tropical forests and use those sustainably. The research subjects for Thailand are a strategical study on eating of the primates, improvement of a microorganism culture collection system, preservation of biological diversification using an artificial ecosystem, bioresource utilization, etc. The subjects for Indonesia are a study of a microorganism culture collection system, study of plant preservation technology, study of microorganism utilization technology, study of plant utilization technology, promotion of the founding of the Indonesia tropical bioresource information center, etc. The subjects for Malaysia are biological diversification database and gene bank, assessment/monitoring of the ocean ecosystem, assessment and inventory of the ecosystem using hi-tech technology, search/separation of bioactive substances originated from microorganism/plant, etc. 26 refs., 24 figs., 81 tabs.

  5. Simulation study on reduction of peak power demand and energy consumption in residential houses with solar thermal and PV systems; Taiyo energy riyo jutaku no fuka heijunka oyobi energy sakugen koka no simulation ni yoru kento

    Energy Technology Data Exchange (ETDEWEB)

    Endo, T. [Yokohama City Office, Yokohama (Japan); Udagawa, M. [Kogakuin Univ., Tokyo (Japan). Faculty of Engineering

    1995-11-20

    In this study, taking the all factors involved in the energy consumption in residential houses as subjects, the effectiveness of the solar PV system and solar thermal utilizing system in residential houses has been studied by simulating a model residential house considering the improvement of the residual environment in the future. Therefore, a model residual house is assumed, 18 kinds of combinations of construction style, cooling and heating type and solar energy utilizing form are assumed and year round simulation is carried out. The conclusions obtained by the simulation are as follows. The energy consumption in residential houses may decrease greatly by using a solar hot water supplying system. If combined with a solar PV system, the energy consumption in one year is about 8.7 to 9.7 MWh. The combined use of a solar thermal utilizing system and a PV system is more effective to reduce the second-time energy in comparison with the PV system only. 36% of the space heating energy consumption may be decreased by using the solar space heating system, but the decrease effect of the energy consumption of the solar space heating system is smaller than the solar hot water supplying system. 12 refs., 26 figs., 3 tabs.

  6. Trial to active SWD using artificial energy source. Use of monochromatic source wavelet; Jinko shingen wo mochiita SWD eno kokoromi. Tan`itsu shuhasu no shingen hakei no riyo

    Energy Technology Data Exchange (ETDEWEB)

    Tsuru, T.; Kozawa, T. [Japan National Oil Corp., Tokyo (Japan); Taniguchi, R. [Mitsubishi Electric Corp., Tokyo (Japan); Matsuhashi, K. [Matsuhashi Techno Research, Hiroshima (Japan); Nishikawa, N. [Fuji Research Institute Corp., Tokyo (Japan)

    1998-04-01

    Seismic while drilling (SWD) is an accurate and safe method for drilling, by which real-time information regarding bit location and bedding boundary below the bit can be predicted by using elastic wave during drilling of rocks in a borehole. However, the signal level is rather low compared with the noise generated from the rig during drilling, resulting in the deteriorated data quality. Since the impact resiliency is small in soft beds, it is difficult to obtain good data due to the small energy of seismic wave propagating along drilling pipe. In order to overcome these problems, active SWD method using artificial seismic source has been developed. This method provides stable low-frequency seismic wave with large energy by the artificial seismic source adopting spring-mass system resonance method. Although the seismic source wave is monochromatic, the direct wave can be sufficiently analyzed and the bit location can be detected on the time profile of seismic prospecting. Protection of borehole damage during dropping of the equipment, energy propagation efficiency in the beds, and analysis of reflected wave are future problems. 11 refs., 6 figs., 4 tabs.

  7. Fiscal 1999 report on basic research for promotion of joint implementation programs. Research on collection and utilization of coal mine methane gas in Russia (Kuznetsk coal field); Russia (Kuznetsk tanden) ni okeru tanko methane gas kaishu riyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The above-mentioned effort is to comply with the COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change) joint implementation clause. At this coal field, mining facilities are growing superannuated and obsolescent in the prolonged business depression, causing frequent occurrence of disasters such as gas explosions. The coal mine gas collection rate at the Kuznetsk coal field is as low as 17%, with concern for safety discouraging sufficient collection. Even the small amount of the collected gas is, in the absence of gas utilizing facilities, totally discharged into the air. For the mitigation of global warming, for mining safety, and for the establishment of a foundation for business, it is desired that coal mine methane gas collection/utilization facilities and related technologies be introduced into the coal field. Gas purging from the pits is incomplete, which is attributed to the lack of equipment capable of excavating proper-diameter bores longer than 100m for longwall mining. Ventilation also needs improvement. The research is under way on the premise that highly reliable intermediate range (300m) boring equipment and gas management technologies will be available. Collection of gas of a 30-35% concentration level at a collection rate of 40% is the target. (NEDO)

  8. Research report for fiscal 1998 on the basic research on the promotion of joint implementation and so forth. Coalbed methane collection and utilization project in China; 1998 nendo Chugoku ni okeru tanko methane gas kaishu riyo project chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    China is surveyed for promotion of joint implementation, which is one of the flexibility measures in the Kyoto Protocol, the Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change. The project aims to collect methane for global warming suppression and to use it as town gas and for power generation as well. The survey covers the 2 coalfields of Yangquan and Panjiang. The Yangquan coalfield is the largest anthracite yielding base in China, with 6 mines in operation. Power generation centering on a 100MW plant is discussed, and generation fired by a mixture of debris out of the coal preparation facility and gas is compared with another fired by town gas, on the assumption that 130-million m{sup 3} is available under the current circumstances. In the case of the Panjiang coalfield, which is expected to develop into a large coal base in the southern part of China, power generation centering on a 50MW plant fired by a mixture of debris and gas is discussed, on the assumption that 63-million m{sup 3} is collectable from the existing 5 mines. Use of town gas is also studied. When Japan's coalbed methane collection technology is applied, the gas drainage rate will be elevated to 40-35% or higher. It is desired that the use of gas drainage will be further diffused for the prevention of disasters of coal mine gas explosion. It is hoped that the use of environmentally friendly energies will be enhanced. (NEDO)

  9. Research program for environmentally-friendly coal utilization system. Follow-up project for briquette production plants (Tanjun Enim); Kankyo chowagata sekitan riyo system donyu shien jigyo. Briquette seizo setsubi ni kakawaru follow up jigyo (Tanjun Enim)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To suppress the emission of environmental pollutants from coal utilization in Indonesia and to contribute to stable security of Japan`s energy, demonstration of clean coal technology and consolidation of diffusion base to be introduced into Indonesia have been promoted. Briquette production plant installed in the Tanjun Enim Coal Mine was examined and guided. Two kinds of high-volatile subbituminous coals are used as raw materials. Semi-cokes with volatile matter of 20% are prepared through fluidized carbonization at 480 degC. Hydrated lime or clay and binder are added to the semi-cokes, to manufacture ball briquettes by molding at room temperature. These are forcedly dried in the continuous drying furnace. In the design, 5 ton ball briquettes can be produced for an hour. Operation time is between 8 and 15 hours in a single shift. Products completely without smoke and smell can be obtained. Combustion performance of the products is remarkably superior to that of conventional products. The operation techniques of carbonization and molding processes were actively guided. To produce briquettes with further high quality, it was suggested that blending ratios and coal properties should be investigated. Inspection method for each apparatus was also guided. There was no abrasion. 13 figs., 2 tabs.

  10. Multiobjective optimization of maintenance planning for existing bridges by using Bridge Management System (BMS); Bridge Management System (BMS) wo riyo shita kizon kyoryo no saiteki iji kanri keikaku no sakutei

    Energy Technology Data Exchange (ETDEWEB)

    Miyamoto, A.; Nakamura, H. [Yamagata Univ. (Japan). Faculty of Science] Kawamura, K. [Yamaguchi Univ., Yamaguchi (Japan). Graduate School

    1998-03-20

    The authors have been developing the Bridge Management System. As one of main functions of this system, a new function is added which affords an optimum maintenance plan (repair and reinforcing) with consideration of the cost and quality of bridge members for each subject bridge. {epsilon}-Limiting method is used for multiobjective optimization and the genetic algorithm to enable parallel search of the solution is adopted for the search of the optimum solution. In this system, various data of the bridge and inspection data are processed in the deterioration diagnosis function and its output is processed in the deterioration prediction function. From the result, the optimum maintenance plan is produced in the maintenance plan optimization function. The maintenance measure (repair and reinforcing) and the effects of the maintenance measure on the predicted deterioration curve should be determined beforehand for the optimization. An application of this system to an existing bridge verifies the efficacy of the system. 18 refs., 8 figs., 9 tabs.

  11. Study and utilization of water-dominated and low-temperature geothermal fields in Italy; Itaria ni okeru nessui takuetsugata oyobi teion chinetsu shigen no kenkyu to riyo jokyo

    Energy Technology Data Exchange (ETDEWEB)

    Yasukawa, K. [Geological Survey of Japan, Tsukuba (Japan)

    1998-06-15

    This paper reports the state of research and development of hot-water dominated and low-temperature geothermal resources in Italy. Geothermal explorations and studies are conducted by the Italian electric power company ENEL and the International Geothermal Research Institute, of which the development of geothermal power generation is carried out by ENEL. Hot water dominated geothermal fields in the central Italy include the Tuscany area having Larderello south of Firenze and the Monte Amiata area, the Latium area around Rome, and the Campania area around Napoli. Low-temperature geothermal fields in the northern Italy include Ferrara, Vicenza, Euganei Hills, and Aqui Terme. A large number of wells have been drilled to as deep as 3000 m in high-temperature geothermal areas for power generation. The present drilling is targeted exclusively at deep reservoirs. In the hot water dominated areas in the central Italy, power plants of 20-MW class are built even in areas with not too high productivity, where waste hot water is utilized in binary cycle. In the northern low-temperature geothermal area, warm water is utilized directly. 8 refs., 14 figs.

  12. Report on a survey in fiscal 1998 for petroleum substituting energy development and utilization in the Pacific Ocean region; 1998 nendo Taiheiyo chiiki sekiyu daitai energy kaihatsu riyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A survey was carried out to make available the information base that can collect, put into order and provide quickly and accurately the energy related information based on global environment problems in the Pacific Ocean region. Fiscal 1998 has performed a substituting energy demand and supply analysis in the Pacific Ocean region by adding the 1996 data, in addition to collection of the normal energy data. For the purpose of analyzing the petroleum substituting energy demand and supply in the Pacific Ocean region, data were collected from 17 countries for fiscal 1997 and the quarterly data for 1998. Retroactive data collection was also continued. The growth rate of primary energy supply in the Pacific Ocean region is 1.8% in average in the 1980's, and 3.8% in the 1990's. In contrast, the growth rate of petroleum substituting energies is 6.4% in the 80's and 6.2% in the former half of the 90's, being far higher than the growth rate of the primary energy supply. The share of the petroleum substituting energies accounting for in the primary energy supply has increased from 6.7% in 1980 to 12.1% in 1996. As the breakdown, nuclear power accounts for overwhelmingly large, followed by geothermal energy and new energies. (NEDO)

  13. Fiscal 2000 survey report. Survey report on development and utilization of alternative energies for oil in Pacific region; 2000 nendo Taiheiyo chiiki sekiyu daitai energy kaihatsu riyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    A survey was conducted, with environmental matters taken into consideration, for building an information gathering infrastructure for the countries in the Pacific region, capable of promptly and accurately collecting and offering energy related information. Conducted in this fiscal year were regular data gathering, review of oil supply and demand and alternative energy supply and demand in the Pacific region, on-site survey of alternative energy development and utilization in Vietnam, quarterly analyses of trend of energy demand, and the like. The supply of primary energy in the Pacific region increased by 2.3% per year in the period 1980 through 1998. The rate of increase was the lowest with oil, and the highest with hydroelectricity, atomic power, and recoverable energies such as geothermal energy. The Vietnamese Government is promoting its efforts to develop power sources by use of recoverable energies for farm village electrification. Efforts are being earnestly exerted to develop its rich natural gas resources and it is expected that there will be a remarkable achievement in the use of alternative energies due to an increase in natural gas consumption. In the field of data collection, various data were registered with the database. (NEDO)

  14. Fiscal 1999 technical survey report. Model project implementation feasibility study in Malaysia on effective utilization of waste heat from paper sludge incineration; 1999 nendo Malaysia ni okeru seishi sludge nensho hainetsu yuko riyo model jigyo jisshi kanosei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Efforts are under way to popularize practical energy conservation technologies through verification on real machines in target countries. Possibilities were studied that Malaysian paper making plants would adopt technologies of collecting heat from high-temperature exhaust gas from paper sludge incineration and of effectively utilizing the thus-collected heat. The Malaysian paper making industry produced 800-thousand tons or more in 1998, covering 72% of the total national demand. Heat recovery facilities may be installed in 15 plants. On-site surveys were made into their actual states, and then Genting Sanyen Industrial Paper Sdn. Bhd. was selected as the plant for the model project, and detailed model project feasibility studies were conducted. The studies covered the amount of wastes from paper making, their properties, treatment process, amounts of utilities to be used during system operation, land on which to build the facilities, and a plan for collecting invested funds. As the result, it was concluded in view of the magnitude of the expected fruit that the model project be implemented at this plant. (NEDO)

  15. Would natural gas utilization continue expanding. ; Assurance of supply to respond to demand increase and Japan's choice. Tennen gas riyo wa kakudai wo tsuzukeruka. ; Juyo zodai ni taiosuru kyokyu no kakuho to Nippon no sentaku

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-06

    This paper summarizes future prospects on natural gas. The world's natural gas consumption during the fiscal year 1991 amounted to 2 trillion 100 billion m[sup 3],acounting for 23% of the primary energy consumption. Japan has consumed 52.7 billion m[sup 3] (ranked sixth in the world) in the same year. Consumption in Japan, Korea, Taiwan, North America and Europe was 1 trillion 100 billion m[sup 3], 20% being depended on out-of-the-area sources. In 2010, difference between the demand (1 trillion 500 billion to 1 trillion 600 billion m[sup 3]) and in-the-area production would expand, causing a shortage of 10 billion to 50 billion m[sup 3]. As new supply sources, 18 projects are in progress in 11 countries, each with problems, however. A consideration on the situation according to confirmed reserve amount reveals that the demand-supply gap in 2010 may not be filled up. Europe is under a strict situation requiring countermeasures. In the Far East areas, no gap is estimated to occur. LNG price will rise as a result of double hull vessel regulations and increase in distance from supply sources. In order to deal with the LNG demand increase, Japan would have to depend upon supply from the former Soviet Union and Middle East areas. 7 figs., 4 tabs.

  16. Proposal of an air-conditioning system using underground heat exchanger as a countermeasure for the heat island problem and its evaluation; Chika hitoshinku reibo wo riyo shita atarashii hitoairando taisaku no teian to sono kanosei no kento

    Energy Technology Data Exchange (ETDEWEB)

    Genchi, Y.; Kasumi, H.; Saruta, H.; Wei, Xin-Gu.; Komiyama, H. [Tokyo Univ. (Japan). Graduate School

    1997-09-05

    These recent years, big cities like capital city as compared to suburbs are facing city heat island problem causing severe temperature increase. For example, there are measured results that the temperature around Nihonbashi, Tokyo, which has the highest density of energy consumption, was 4degC higher than that of coastal area having lower energy consumption density. The speedy increase of power consumption in summer due to massive cooling load is one of the main problem of heat island. The worse cycle of temperature increase is caused by the increase of heat liberated from cooler together with the addition of heat liberated from vehicles and so forth. Main measures for heat island carried out so far has been studied from the point of view of save energy technology for each such as efficiency improvement of heat pump cooling machine and combustion improvement of vehicles. In future, necessity of save energy measures from macro point of view that reduces the heat liberated in the whole city is cited. 24 refs., 7 figs., 3 tabs.

  17. Study of an optimization of regeneration for an absorbent used in the solar desiccant cooling system; Taiyonetsu riyo desiccant reibo ni mochiirareru kyushuzai saisei tokusei no saitekika ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Saito, Y. [Osaka Institute of Technology, Osaka (Japan)

    1997-11-25

    A desiccant cooling system uses concentrated aqueous solution of an absorbent to reduce humidity, hence the resultant absorbent solution becomes dilute. Regeneration of the dilute solution uses solar heat, where the regeneration characteristics are affected by solution temperature, vapor pressure, water content, air-liquid flow rate, and other factors. Therefore, mutual relationship among these different factors were investigated, and an optimum operating condition was discussed. The regeneration characteristics of the absorbent is strongly affected by temperature of triethylene glycol (TEG). This is because vapor pressure, Ps, in the TEG aqueous solution increases as the TEG temperature rises. This means that preheating the solution is effective in regenerating the absorbent. As the regeneration progresses, the water content, Ww, decreases, and the regeneration rate decreases. This is because of reduction in the Ps in association with decrease in the Ww of the TEG. This suggests that it is important in the absorbent regeneration to reduce flow rate of the TEG aqueous solution as low as possible. Raised air temperature reduces difference in vapor partial pressure between the TEG and the air, resulting in reduced regeneration rate. 5 refs., 9 figs.

  18. Annual cycle solar energy utilization with seasonal storage. Part 8. Study on periodic steady state of the annual cycle energy system at a practical operation; Kisetsukan chikunetsu ni yoru nenkan cycle taiyo energy riyo system ni kansuru kenkyu. 8

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, H.; Okumiya, M. [Nagoya University, Nagoya (Japan)

    1997-11-25

    A study was made of the periodic steady state of the annual cycle solar energy system with seasonal heat storage at a practical operation. Cold heat in winter and warm heat in summer are stored in the seasonal storage tank, and these are each used in shift until when demand for cold/warm heat appears. Moreover, gap in quantity of cold/warm heat going in/out of the heat storage tank during a year is filled by natural energy such as solar energy, so that the system can be operated in annual cycles. Studies were conducted of the periodic unsteady term and the problem on lowering of performance during the term such as the periodic unsteady term of water temperature inside the seasonal heat storage tank and temperature of the soil around the storage tank, and the level of lowering of performance during the term, necessity of additional operation/control at the start of operation and aged deterioration of the system. Within the assumption, even if starting operation in any time of the year, the system could show the performance almost expected from the first operation year with no additional system operation and control required only at the start of operation. It is thought that the heat source selection control of heat pump largely contributes to this. 4 refs., 5 figs., 3 tabs.

  19. Improvement of a manageability of biological nitrogen and phosphorus removal plant using a wastewater treatment process simulator; Gesui shori purosesu shimyureta no riyo ni yoru seibutsuteki chisso/rin jokyo puranto no kanrisei no kojo

    Energy Technology Data Exchange (ETDEWEB)

    Kurata, G. [Toyohashi Univ. of Technology, Aichi (Japan). Faculty of Engineering; Tsumura, K. [Kyoto Univ., Kyoto (Japan). Graduate School; Yamamoto, Y. [Osaka Prefectural Inst. of Public Health, Osaka (Japan)

    1997-02-10

    In this paper, a method for executing a stable management of wastewater treatment process is examined by using a wastewater treatment process simulator with the facilities adopting intermittently aerated 2-tank activated sludge process as the object. The following results are obtained from said examination. Based on a fact that the treatment efficiency is influenced greatly by the comparatively miner parts of the process in biological nitrogen and phosphorus removal, a wastewater treatment process simulator, by which the intrinsic process flow, restricting conditions and behaviors of controlling system of each facility can be dealt with, is developed by using object-directional model. As the results of this development, not only the effects approximate to those of actual process can be obtained, but also the trial error and alternation of process flow can be realized in a short time. The serious influence of disappearance of dissolvable organic substance in flow-adjusting tank upon the deterioration of biological phosphorus removal is clarified by the results of the simulation based on the investigation of flowing-in water quality. 12 refs., 13 figs., 4 tabs.

  20. Study on management of resource and environment in poverty areas. Examples of agriculture and water use in bangladesh; Hinkon chiiki ni okeru shigen to kankyo no kanri ni kansuru kenkyu. Banguradeshu no nogyo to mizu riyo wo rei to shite

    Energy Technology Data Exchange (ETDEWEB)

    Nishimura, Hiroyuki [Kinki University, Osaka (Japan). Faculty of Agriculture

    1998-12-16

    This paper describes the main features of flood plains and fish production related to agriculture in the vast inland water areas of Bangladesh. The inland fisheries have been an important source of animal protein and provided employment opportunities for rural Bangladeshies. Generally the fishermen's economic conditions are below the poverty line in this country. Fishi production in the inland water areas are not met to the basic needs of the people on a sustainable basis. While inland fishery is important for business as well as for people's livelihood, it is not usually managed appropriately for resource conservation and environment. Fishery policies and planning have to be undertaken for comprehensive long-term perspective in order that agricultural and other sectors would not contaminate the environment. (author)

  1. Development of an integrated recycling system for home electric appliances using cryogenic energy. Report of the development achieved in FY 1995; 1995 nendo reinetsu riyo haikibutsu teion hasai sogo recycle system kaihatsu. Seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In FY 1995, the final year of the project as to recycling of large size waste such as discarded home electric appliances as well as energy recovery, operation methods of the comprehensive system were investigated, to design practical systems. Constituent elements and the comprehensive system, which was completed in the prior fiscal year, were operated to evaluate the pilot plant with respect to the categories of operation performance, separation efficiency, and recovery efficiency. Three categories of discarded items were refrigerators, washing machines, and television sets. As a result, it was confirmed that the pilot plant checked out favorably, satisfying all the target values given at the initial stage. For the research of practical system, conceptual design of the practical system, its practical scale, and the economic factors were investigated. In the case of a plant scale of 3 t/h, a trial balance was made of setting equipment costs, fixed costs, fluctuation costs, processing costs, and profit from sale of recovered items with value. As a result, the net cost was about 1,700 yen per wasted hold appliance. In addition, problems in the construction of a practical plant were extracted. 68 figs., 74 tabs.

  2. Report on the FY 1999 research survey on the industrial utilization/development of the biofilm formation mechanism and antifouling substances; 1999 nendo bio film keisei kiko oyobi sogai busshitsu no sangyoteki riyo kaihatsu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The paper described the results of the FY 1999 research on the fouling by marine aufwuchs. The survey is aimed at searching the nature world for active substances for biological antifouling. The fouling mechanism in the ocean is as follows. The adsorption of organisms called the conditioning film first occurs on the surface, and next, bacteria and diatom around the surface form biofilm and cover. After that, biological fouling by large aufwuchs occurs. Therefore, the control of biofilm formation was regarded as most important, and with this as a guidepost, the search was conducted. Using biofilm anti-formation activity and periphytic bacteria anti-growth activity as guideposts, some compounds were searched for. Being aimed at Porifera, in particular, new compounds were isolated from it. Since few of other organisms attaches on the surface of sponge, there is a great possibility of Porifera's producing any anti-fouling substances. Further, it is thought that symbiotic microorganisms of sponge (40% of the total weight) produce various biologically active substances. Synthetic phenethyl amine derivatives were also studied. (NEDO)

  3. Hybrid utilization of solar energy. Part 2. Performance analyses of heating system with air hybrid collector; Taiyo energy no hybrid riyo ni kansuru kenkyu. 2. Kuki shunetsu hybrid collector wo mochiita danbo system no seino hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Yoshinaga, M.; Okumiya, M. [Nagoya University, Nagoya (Japan)

    1996-10-27

    For the effective utilization of solar energy at houses, a heating system using an air hybrid collector (capable of simultaneously performing heat collection and photovoltaic power generation). As the specimen house, a wooden house of a total floor area of 120m{sup 2} was simulated. Collected air is fanned into a crushed stone heat accumulator (capable of storing one day`s collection) or into a living room. The output of solar cell arrays is put into a heat pump (capable of handling a maximum hourly load of 36,327kJ/h) via an inverter so as to drive the fan (corresponding to average insolation on the heat collecting plate of 10.7MJ/hm{sup 2} and heat collecting efficiency of 40%), and shortage in power if any is supplied from the system interconnection. A hybrid collector, as compared with the conventional air collector, is lower in thermal efficiency but the merit that it exhibits with respect to power generation is far greater than what is needed to counterbalance the demerit. When the hybrid system is in heating operation, there is an ideal heat cycle of collection, accumulation, and radiation when the load is light, but the balance between accumulation and radiation is disturbed when the load is heavy. 4 refs., 8 figs., 3 tabs.

  4. Effects on annual cost of solar/air-heat utilization system of carbon tax and interest rate for a residential house; Jutakuyo taiyo/taikinetsu riyo system no nenkan keihi ni oyobosu tansozei kinri no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Q.; Kenmoku, Y.; Sakakibara, T. [Toyohashi University of Technology, Aichi (Japan); Nakagawa, S. [Maizuru National College of Technology, Kyoto (Japan); Kawamoto, T. [Shizuoka University, Shizuoka (Japan). Faculty of Engineering

    1996-10-27

    In recent years, a system has been proposed that utilizes river heat, air-heat, exhaust heat from a cooler, etc., in addition to natural energy for the heat pump. With the introduction of such system, the amount of energy used and that of CO2 exhaust will be greatly reduced, but annual expenses will be increased as it stands. In order to improve the cost efficiency of the system, a proposal has been made for the introduction of an economic policy such as the carbon tax and a low interest financing system. With these matters in the background, the subject study predicts the production of solar cells in the future and, on the basis of this production, determines the price, conversion efficiency and equipment energy of solar cells in the future. Using these values and taking into consideration the introduction of the carbon tax and the low interest financing system, the optimum area was determined for solar cells and heat concentrators in a future residential solar/air-heat energy system. The carbon tax, being imposed on all CO2 discharges, had a large effect. Moreover, as the tax increased, annual expenses decreased for the solar/air-heat system. 3 refs., 6 figs.

  5. Solid electrolyte membranes and the system to produce hydrogen from thermally decomposed water by solar energy; Taiyo energy riyo ni yoru mizu no chokusetsu netsubunkai kara no suiso seizoyo

    Energy Technology Data Exchange (ETDEWEB)

    Nigara, K.; Watanabe, K.; Kawamura, K.; Kawada, T.; Mizusaki, J.; Ishigame, M. [Tohoku University, Sendai (Japan). Research Institute for Scientific Measurements

    1996-10-27

    For conversion of solar heat to transportable energy, hydrogen production by direct thermal decomposition of water using concentrated high-temperature solar heat was studied. Water vapor is injected into the tubular target with high melting point and high oxygen permeability at high temperature while heating the target by concentrated solar heat over 2000K. Oxygen in decomposed gas is discharged through an oxygen permeable membrane to extract hydrogen. Solid electrolyte is used as one of the target materials. Oxygen gas in the high-oxygen partial pressure site changes into oxygen ion by accepting two electrons at the target surface, and returns to neutral oxygen gas in the low-oxygen partial pressure site by discharging two electrons at the surface after permeation through oxygen vacancy. In the case of n-type solid electrolyte, to obtain constant permeation of a large amount of oxygen, flow of a large amount of electrons is indispensable in the opposite direction to oxygen ion. Among [(ZrO2)(1-x)(CeO2)x](0.9)(CaO)(0.1), materials of 0.4-0.5 in x seems to be useful as the target material. 7 refs., 7 figs.

  6. Borehole geophysics for delineating the geological structure in the Sakonishi prospect, the Hida area, Japan; Hida chiiki Sako nishi chiku ni okeru boring ko riyo butsuri tansa ni yoru chishitsu kozo kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Katayama, H.; Hishida, H.; Yoshioka, K. [Metal Mining Agency of Japan, Tokyo (Japan)

    1997-05-27

    In order to discuss effectiveness of physical exploration in the Sakonishi prospect in the Hida area, physical exploration was carried out by utilizing bored wells. This area contains the Kamioka mine, one of the major base metal mines in Japan, where electrical exploration has been attempted several times in the past. No effective results have been obtained, however, because specific resistance contrast between mine beds and base rocks is too small, and the topography is too steep making site workability inferior. As part of the investigations on geological structures over wide areas, electrical logging (specific resistance and natural potential) was performed in fiscal 1995 and 1996 by utilizing the boreholes. Induced polarization logging was also conducted on the same boreholes. A traverse line on the ground with a length of 600 m and boreholes were used to execute specific resistance tomography. Clear extraction was possible on a fault structure which is thought related with limestone distribution and mine bed creation. However, it was not possible to identify upward continuity of zinc ores expected in