Information Architecture without Internal Theory: An Inductive Design Process.

Science.gov (United States)

Haverty, Marsha

2002-01-01

Suggests that information architecture design is primarily an inductive process, partly because it lacks internal theory and partly because it is an activity that supports emergent phenomena (user experiences) from basic design components. Suggests a resemblance to Constructive Induction, a design process that locates the best representational…

Tailoring Risk Management in Design

DEFF Research Database (Denmark)

Tegeltija, M.; Oehmen, J.; McMahon, C. A.

2018-01-01

While risk quantification research has grown over the last few decades, only a limited number of studies have addressed the overall process integration of these approaches in design risk management. This paper argues that the choice of risk quantification method has strong implications for several...... process aspects. We investigate current risk management maturity models and suggest an expansion to accommodate requirements originating from the choice of quantification method, and to inform the choice of quantification method, based on other process parameters, validated through 3 case companies....

Forging process design for risk reduction

Science.gov (United States)

Mao, Yongning

In this dissertation, forging process design has been investigated with the primary concern on risk reduction. Different forged components have been studied, especially those ones that could cause catastrophic loss if failure occurs. As an effective modeling methodology, finite element analysis is applied extensively in this work. Three examples, titanium compressor disk, superalloy turbine disk, and titanium hip prosthesis, have been discussed to demonstrate this approach. Discrete defects such as hard alpha anomalies are known to cause disastrous failure if they are present in those stress critical components. In this research, hard-alpha inclusion movement during forging of titanium compressor disk is studied by finite element analysis. By combining the results from Finite Element Method (FEM), regression modeling and Monte Carlo simulation, it is shown that changing the forging path is able to mitigate the failure risk of the components during the service. The second example goes with a turbine disk made of superalloy IN 718. The effect of forging on microstructure is the main consideration in this study. Microstructure defines the as-forged disk properties. Considering specific forging conditions, preform has its own effect on the microstructure. Through a sensitivity study it is found that forging temperature and speed have significant influence on the microstructure. In order to choose the processing parameters to optimize the microstructure, the dependence of microstructure on die speed and temperature is thoroughly studied using design of numerical experiments. For various desired goals, optimal solutions are determined. The narrow processing window of titanium alloy makes the isothermal forging a preferred way to produce forged parts without forging defects. However, the cost of isothermal forging (dies at the same temperature as the workpiece) limits its wide application. In this research, it has been demonstrated that with proper process design, the die

Risk-Informed Assessment Methodology Development and Application

International Nuclear Information System (INIS)

Sung Goo Chi; Seok Jeong Park; Chul Jin Choi; Ritterbusch, S.E.; Jacob, M.C.

2002-01-01

Westinghouse Electric Company (WEC) has been working with Korea Power Engineering Company (KOPEC) on a US Department of Energy (DOE) sponsored Nuclear Energy Research Initiative (NERI) project through a collaborative agreement established for the domestic NERI program. The project deals with Risk-Informed Assessment (RIA) of regulatory and design requirements of future nuclear power plants. An objective of the RIA project is to develop a risk-informed design process, which focuses on identifying and incorporating advanced features into future nuclear power plants (NPPs) that would meet risk goals in a cost-effective manner. The RIA design methodology is proposed to accomplish this objective. This paper discusses the development of this methodology and demonstrates its application in the design of plant systems for future NPPs. Advanced conceptual plant systems consisting of an advanced Emergency Core Cooling System (ECCS) and Emergency Feedwater System (EFWS) for a NPP were developed and the risk-informed design process was exercised to demonstrate the viability and feasibility of the RIA design methodology. Best estimate Loss-of-Coolant Accident (LOCA) analyses were performed to validate the PSA success criteria for the NPP. The results of the analyses show that the PSA success criteria can be met using the advanced conceptual systems and that the RIA design methodology is a viable and appropriate means of designing key features of risk-significant NPP systems. (authors)

Polarization information processing and software system design for simultaneously imaging polarimetry

Science.gov (United States)

Wang, Yahui; Liu, Jing; Jin, Weiqi; Wen, Renjie

2015-08-01

Simultaneous imaging polarimetry can realize real-time polarization imaging of the dynamic scene, which has wide application prospect. This paper first briefly illustrates the design of the double separate Wollaston Prism simultaneous imaging polarimetry, and then emphases are put on the polarization information processing methods and software system design for the designed polarimetry. Polarization information processing methods consist of adaptive image segmentation, high-accuracy image registration, instrument matrix calibration. Morphological image processing was used for image segmentation by taking dilation of an image; The accuracy of image registration can reach 0.1 pixel based on the spatial and frequency domain cross-correlation; Instrument matrix calibration adopted four-point calibration method. The software system was implemented under Windows environment based on C++ programming language, which realized synchronous polarization images acquisition and preservation, image processing and polarization information extraction and display. Polarization data obtained with the designed polarimetry shows that: the polarization information processing methods and its software system effectively performs live realize polarization measurement of the four Stokes parameters of a scene. The polarization information processing methods effectively improved the polarization detection accuracy.

Structuring a risk-informed and performance-based process for optimization of regulation for Laguna Verde NPP

International Nuclear Information System (INIS)

Rodriguez-Hernandez, A.

2001-01-01

This work describes the plan for a process to incorporate into the regulatory activities the risk information derived from probabilistic risk assessments, as well as information generated by the periodic evaluation of the Maintenance Rule (MR, 10CFR50.65). The current status of the Laguna Verde NPP (LVNPP) risk analysis, PSA Level 1, allows determining in a reliable way the accident scenarios and the involved systems having significant impact on safety. The determination of system's risk significance allows carrying out a prioritization of safety issues to be evaluated and inspected; for example, operational events, changes to technical specifications, design modifications, inspection priorities, etc. In addition, complementary and basic information are the results generated by the performance monitoring of structures, systems and components (SSCs) under the scope of the MR. The SSCs performance trends are indicatives to focus evaluation and inspection activities on important issues. Then, with the reportability in short periods the performance evaluations of SSCs and the incorporation of a process of risk management, the evaluation and inspection activities will be directed to those risk significant systems showing degraded performance. Therefore, based on systems performance results and risk information, it is feasible to have certain flexibility or a better balance between the regulatory requirements. Inside this process, a consensus is needed with the utility to establish quality attributes for the plant-specific PSA, as well as the rules to be followed in the use of this tool and the kind of information to be reported for MR results. (author)

Risk Information Seeking among U.S. and Dutch Residents. An Application of the model of Risk Information Seeking and Processing

NARCIS (Netherlands)

ter Huurne, E.F.J.; Griffin, Robert J.; Gutteling, Jan M.

2009-01-01

The model of risk information seeking and processing (RISP) proposes characteristics of individuals that might predispose them to seek risk information. The intent of this study is to test the model’s robustness across two independent samples in different nations. Based on data from the United

A model of designing as the intersection between uncertainty perception, information processing, and coevolution

DEFF Research Database (Denmark)

Lasso, Sarah Venturim; Cash, Philip; Daalhuizen, Jaap

2016-01-01

, the designer's perceived uncertainty is the motivation to start a process of collecting, exchanging, and integrating knowledge. This has been formalised in Information-Processing Theory and more generally described by authors such as Aurisicchio et al. (2013) who describe design as an information...... takes the first steps towards linking these disparate perspectives in a model of designing that synthesises coevolution and information processing. How designers act has been shown to play an important role in the process of New Product Development (NPD) (See e.g. Badke-Schaub and Frankenberger, 2012...... transformation process. Here the aim of the activity is to reduce the perceived uncertainty through identifying and integrating external information and knowledge within the design team. For2example, when perceiving uncertainty the designer might seek new information online, process this information, and share...

Development of risk-informed assessment (RIA) design methodology

International Nuclear Information System (INIS)

Ji, S. K.; Park, S. J.; Park, B. R.; Kim, M. R.; Choi, C. J.

2001-01-01

It has been assessed that the capital cost for future nuclear power plants needs to be reduced on the order of 35% to 40% for Advanced Light Water Reactors such as KNGR and System 80+. Such reduction in the capital cost will require a fundamental re-evaluation of the industry standards and regulatory basis under which nuclear plants are designed and licensed. The objective of this study is to develop the risk-informed assessment (RIA) design methodology for future nuclear power plants. In order to meet this objective, the design simplification method is developed and RIA design methodology exercised for conceptual system. For the methodology verification, simplified conceptual ECCS and feedwater system are developed, then LOCA sensitivity analyses and agressive secondary cooldown analyses for these systems are performed. In addition, the probability safety assessment (PSA) model for LOCA is developed and the validation of RIA design methodology is demonstrated

Information systems for risk management

OpenAIRE

Michael S. Gibson

1997-01-01

Risk management information systems are designed to overcome the problem of aggregating data across diverse trading units. The design of an information system depends on the risk measurement methodology that a firm chooses. Inherent in the design of both a risk management information system and a risk measurement methodology is a tradeoff between the accuracy of the resulting measures of risk and the burden of computing them. Technical progress will make this tradeoff more favorable over time...

Cyber-Informed Engineering: The Need for a New Risk Informed and Design Methodology

Energy Technology Data Exchange (ETDEWEB)

Price, Joseph Daniel [Idaho National Laboratory; Anderson, Robert Stephen [Idaho National Laboratory

2015-06-01

Current engineering and risk management methodologies do not contain the foundational assumptions required to address the intelligent adversary’s capabilities in malevolent cyber attacks. Current methodologies focus on equipment failures or human error as initiating events for a hazard, while cyber attacks use the functionality of a trusted system to perform operations outside of the intended design and without the operator’s knowledge. These threats can by-pass or manipulate traditionally engineered safety barriers and present false information, invalidating the fundamental basis of a safety analysis. Cyber threats must be fundamentally analyzed from a completely new perspective where neither equipment nor human operation can be fully trusted. A new risk analysis and design methodology needs to be developed to address this rapidly evolving threatscape.

Multiple health risk perception and information processing among African Americans and whites living in poverty.

Science.gov (United States)

Hovick, Shelly R; Freimuth, Vicki S; Johnson-Turbes, Ashani; Chervin, Doryn D

2011-11-01

We investigated the risk-information-processing behaviors of people living at or near the poverty line. Because significant gaps in health and communication exist among high- and low-income groups, increasing the information seeking and knowledge of poor individuals may help them better understand risks to their health and increase their engagement in health-protective behaviors. Most earlier studies assessed only a single health risk selected by the researcher, whereas we listed 10 health risks and allowed the respondents to identify the one that they worried about most but took little action to prevent. Using this risk, we tested one pathway inspired by the risk information seeking and processing model to examine predictors of information insufficiency and of systematic processing and extended this pathway to include health-protective action. A phone survey was conducted of African Americans and whites living in the southern United States with an annual income of ≤$35,000 (N= 431). The results supported the model pathway: worry partially mediated the relationship between perceived risk and information insufficiency, which, in turn, increased systematic processing. In addition, systematic processing increased health-protective action. Compared with whites and better educated respondents, African Americans and respondents with little education had significantly higher levels of information insufficiency but higher levels of systematic processing and health-protective action. That systematic processing and knowledge influenced health behavior suggests a potential strategy for reducing health disparities. © 2011 Society for Risk Analysis.

Importance measures and genetic algorithms for designing a risk-informed optimally balanced system

International Nuclear Information System (INIS)

Zio, Enrico; Podofillini, Luca

2007-01-01

This paper deals with the use of importance measures for the risk-informed optimization of system design and management. An optimization approach is presented in which the information provided by the importance measures is incorporated in the formulation of a multi-objective optimization problem to drive the design towards a solution which, besides being optimal from the points of view of economics and safety, is also 'balanced' in the sense that all components have similar importance values. The approach allows identifying design systems without bottlenecks or unnecessarily high-performing components and with test/maintenance activities calibrated according to the components' importance ranking. The approach is tested at first against a multi-state system design optimization problem in which off-the-shelf components have to be properly allocated. Then, the more realistic problem of risk-informed optimization of the technical specifications of a safety system of a nuclear power plant is addressed

Anti-nuclear behavioral intentions: The role of perceived knowledge, information processing, and risk perception

International Nuclear Information System (INIS)

Zhu, Weiwei; Wei, Jiuchang; Zhao, Dingtao

2016-01-01

This study explored the key factors underlying people's anti-nuclear behavioral intentions. The protective action decision model and the heuristic–systematic model were integrated and adapted from a risk information perspective to construct a hypothetical model. A questionnaire study was conducted on a sample of residents near the Haiyang Nuclear Power Plant, which is under construction in Shandong Province, China (N=487). Results show that, as expected, perceived knowledge is vital in predicting people's information insufficiency, information seeking, systematic processing, and risk perception. Moreover, the inverted U relationship between perceived knowledge and anti-nuclear behavioral intentions is indicated in the study. Information insufficiency and information seeking also significantly predict systematic processing. Furthermore, people's behavioral intentions are motivated by risk perception but fail to be stimulated by systematic processing. Implications and recommendations for future research are discussed. - Highlights: • The study explores anti-nuclear behavior from a risk information perspective. • Risk perception and knowledge matter to anti-nuclear behavioral intentions. • Inverted U relationship between knowledge and behavioral intentions is indicated. • More understanding of nuclear power could reduce public opposition.

Implications of Building Information Modeling on Interior Design Education: The Impact on Teaching Design Processes

Directory of Open Access Journals (Sweden)

Amy Roehl, MFA

2013-06-01

Full Text Available Currently, major shifts occur in design processes effecting business practices for industries involved with designing and delivering the built environment. These changing conditions are a direct result of industry adoption of relatively new technologies called BIM or Building Information Modeling. This review of literature examines implications of these changing processes on interior design education.

Design of Process Displays based on Risk Analysis Techniques

DEFF Research Database (Denmark)

Paulsen, Jette Lundtang

-tions. On the basis of her experience with the design of display systems; with risk analysis methods and from 8 years, as an engi-neer-on-shift at a research reactor, the author developed a method to elicit necessary information to the operator. The method, a combination of a Goal-Tree and a Fault-Tree, is described...

Methodology for Designing Operational Banking Risks Monitoring System

Science.gov (United States)

Kostjunina, T. N.

2018-05-01

The research looks at principles of designing an information system for monitoring operational banking risks. A proposed design methodology enables one to automate processes of collecting data on information security incidents in the banking network, serving as the basis for an integrated approach to the creation of an operational risk management system. The system can operate remotely ensuring tracking and forecasting of various operational events in the bank network. A structure of a content management system is described.

Risk-informed regulation

International Nuclear Information System (INIS)

Hoffman, D.R.

2003-01-01

In assessing safety for nuclear facilities, regulators have traditionally used a deterministic approach. New techniques for assessing nuclear or radiological risks make it possible for regulators to incorporate risk insights into their regulations. By 'risk-informing' the regulatory processes, independent bodies tasked with protecting the health and safety of the public can focus on those design and operational issues most important to safety. Such an approach is a move away from prescriptive regulations that were based on conservative engineering judgments toward regulations focused on issues that contribute significantly to safety. Despite the availability of probabilistic risk assessment (PRA) tools, organisations often struggle with how to best use this capability. Most international regulations are still based largely on deterministic analyses that were developed without the benefit of quantitative or measurable estimates of risk. PRA considers issues of risk in a more comprehensive manner by examining a wider spectrum of initiating events and their frequency, and considers the likelihood of events in a rigorous and comprehensive manner. In some countries, nuclear regulators are actively moving toward increasing the use of risk insights in a variety of strategic arenas, including risk-informed technical specifications (operating limits and conditions), in-service inspection and testing, programs, and assessment and enforcement actions. A risk-informed approach enhances the traditional deterministic approach by explicitly considering a broader range of safety challenges, focusing resources on the basis of risk significance, considering a broader range of counter measures to mitigate challenges, and explicitly identifying and quantifying uncertainties in analyses. (author)

U.S. Nuclear Regulatory Commission Process for Risk-Informing the Nuclear Waste Arena

International Nuclear Information System (INIS)

Leslie, B. W.

2003-01-01

The U.S. Nuclear Regulatory Commission (NRC) is increasing the use of risk insights and information in its regulation of nuclear materials and waste. The objective of this risk-informed regulatory effort is to improve the effectiveness and efficiency of the agency, while maintaining or increasing its focus on safety. The agency's Office of Nuclear Material Safety and Safeguards (NMSS) proposed a five-step process to carry out a framework for increasing the use of risk information and insights in its regulation of nuclear materials and waste. The office is carrying out the five-step process to risk-inform the nuclear materials and waste arenas. NMSS's actions included forming a Risk Task Group and the use of case studies to test and complete screening criteria for identifying candidate regulatory applications amenable for risk-informing. Other actions included involving stakeholders through enhanced public participation, developing safety goals for materials and waste regulatory applications, and establishing a risk training program for staff. Through the case studies, NRC staff found the draft screening criteria to be effective in deciding regulatory areas that may be amenable to an increased use of risk insights. NRC staff also found that risk information may have the potential to reduce regulatory burden and improve staff's efficiency in making decisions, while maintaining safety. Finally, staff found that it would be possible to develop safety goals for the nuclear materials and waste arenas

Context-sensitive Information security Risk identification and evaluation techniques

NARCIS (Netherlands)

Ionita, Dan

2014-01-01

The objective of my research is to improve and support the process of Information security Risk Assessment by designing a scalable Risk argumentation framework for socio-digital-technical Risk. Due to the various types of IT systems, diversity of architectures and dynamic nature of Risk, there is no

Imperfect Information in Software Design Processes

NARCIS (Netherlands)

Noppen, J.A.R.

2007-01-01

The process of designing high-quality software systems is one of the major issues in software engineering research. Over the years, this has resulted in numerous design methods, each with specific qualities and drawbacks. For example, the Rational Unified Process is a comprehensive design process,

Social Information Processing in Preschool Children: Relations to Sociodemographic Risk and Problem Behavior

Science.gov (United States)

Ziv, Yair; Sorongon, Alberto

2011-01-01

Using a multicomponent, process-oriented approach, the links between social information processing during the preschool years and (a) sociodemographic risk and (b) behavior problems in preschool were examined in a community sample of 196 children. Findings provided support for our initial hypotheses that aspects of social information processing in…

Designing information systems

CERN Document Server

Blethyn, Stanley G

2014-01-01

Designing Information Systems focuses on the processes, methodologies, and approaches involved in designing information systems. The book first describes systems, management and control, and how to design information systems. Discussions focus on documents produced from the functional construction function, users, operators, analysts, programmers and others, process management and control, levels of management, open systems, design of management information systems, and business system description, partitioning, and leveling. The text then takes a look at functional specification and functiona

Structural optimization for materially informed design to robotic production processes

NARCIS (Netherlands)

Bier, H.H.; Mostafavi, S.

2015-01-01

Hyperbody’s materially informed Design-to-Robotic-Production (D2RP) processes for additive and subtractive manufacturing aim to achieve performative porosity in architecture at various scales. An extended series of D2RP experiments aiming to produce prototypes at 1:1 scale wherein design materiality

Intrinsic information Security: Embedding security issues in the design process of telematics systems

NARCIS (Netherlands)

Tettero, Olaf; Tettero, O.

This book presents a systematic approach to embed information security issues in the design process of telematics systems. The approach supports both designers and user organisations. We elaborate on the activities that designers should perform to design telematics systems in which information

Achieving a Risk-Informed Decision-Making Environment at NASA: The Emphasis of NASA's Risk Management Policy

Science.gov (United States)

Dezfuli, Homayoon

2010-01-01

This slide presentation reviews the evolution of risk management (RM) at NASA. The aim of the RM approach at NASA is to promote an approach that is heuristic, proactive, and coherent across all of NASA. Risk Informed Decision Making (RIDM) is a decision making process that uses a diverse set of performance measures along with other considerations within a deliberative process to inform decision making. RIDM is invoked for key decisions such as architecture and design decisions, make-buy decisions, and budget reallocation. The RIDM process and how it relates to the continuous Risk Management (CRM) process is reviewed.

Risk perception and decision processes underlying informed consent to research participation.

Science.gov (United States)

Reynolds, William W; Nelson, Robert M

2007-11-01

According to the rational choice model, informed consent should consist of a systematic, step-by-step evaluation of all information pertinent to the treatment or research participation decision. Research shows that people frequently deviate from this normative model, however, employing decision-making shortcuts, or heuristics. In this paper we report findings from a qualitative study of 32 adolescents and (their) 31 parents who were recruited from two Northeastern US hospitals and asked to consider the risks of and make hypothetical decisions about research participation. The purpose of this study was to increase our understanding of how diabetic and at-risk adolescents (i.e., those who are obese and/or have a family history of diabetes) and their parents perceive risks and make decisions about research participation. Using data collected from adolescents and parents, we identify heuristic decision processes in which participant perceptions of risk magnitude, which are formed quickly and intuitively and appear to be based on affective responses to information, are far more prominent and central to the participation decision than are perceptions of probability. We discuss participants' use of decision-making heuristics in the context of recent research on affect and decision processes, and we consider the implications of these findings for researchers.

Designing quantum information processing via structural physical approximation.

Science.gov (United States)

Bae, Joonwoo

2017-10-01

In quantum information processing it may be possible to have efficient computation and secure communication beyond the limitations of classical systems. In a fundamental point of view, however, evolution of quantum systems by the laws of quantum mechanics is more restrictive than classical systems, identified to a specific form of dynamics, that is, unitary transformations and, consequently, positive and completely positive maps to subsystems. This also characterizes classes of disallowed transformations on quantum systems, among which positive but not completely maps are of particular interest as they characterize entangled states, a general resource in quantum information processing. Structural physical approximation offers a systematic way of approximating those non-physical maps, positive but not completely positive maps, with quantum channels. Since it has been proposed as a method of detecting entangled states, it has stimulated fundamental problems on classifications of positive maps and the structure of Hermitian operators and quantum states, as well as on quantum measurement such as quantum design in quantum information theory. It has developed efficient and feasible methods of directly detecting entangled states in practice, for which proof-of-principle experimental demonstrations have also been performed with photonic qubit states. Here, we present a comprehensive review on quantum information processing with structural physical approximations and the related progress. The review mainly focuses on properties of structural physical approximations and their applications toward practical information applications.

The Influence Of Business Process And Risk Management On The Quality Of Accounting Information System

OpenAIRE

Azhar Susanto

2017-01-01

Business process and risk management are factors which can improve the quality of accounting information systems. In Indonesia this phenomenon happens in many organizations showing that there is disintegrated accounting information systems which then causes unqualified accounting information. This research was carried out in order to find out fact through examination presenting in the influence of business process and risk management towards accounting information system. Data used in this re...

Postural risk assessment of mechanised firewood processing.

Science.gov (United States)

Spinelli, Raffaele; Aminti, Giovanni; De Francesco, Fabio

2017-03-01

The study assessed the postural risk of mechanised firewood processing with eight machines, representing the main technology solutions available on the market. Assessment was conducted with the Ovako Working posture Analysis System (OWAS) on 1000 still frames randomly extracted from videotaped work samples. The postural risk associated with firewood processing was variable and associated with technology type. Simple, manually operated new machines incurred a higher postural risk compared with semi- or fully automatic machines. In contrast, new semi-automatic and automatic machines were generally free from postural risk. In all cases, attention should be paid to postural risk that may occur during blockage resolution. The study did not cover the postural risk of firewood processing sites as a whole. The study provided useful information for selecting firewood processing machinery and for improving firewood machinery design, as part of a more articulate strategy aimed at enhancing the safety of firewood processing work sites. Practitioner Summary: The postural risk associated with mechanised firewood processing (eg cutting and splitting) depends on the type of equipment. Postural risk is highest (OWAS Action Category 2) with new in-line machines, designed for operation by a single worker. Fully automatic machines present minimum postural risk, except during blockage resolution.

A Risk Management Process for Consumers: The Next Step in Information Security

NARCIS (Netherlands)

van Cleeff, A.

2010-01-01

Simply by using information technology, consumers expose themselves to considerable security risks. Because no technical or legal solutions are readily available, and awareness programs have limited impact, the only remedy is to develop a risk management process for consumers. Consumers need to

The Influence Of Business Process And Risk Management On The Quality Of Accounting Information System

Directory of Open Access Journals (Sweden)

Azhar Susanto

2017-09-01

Full Text Available Business process and risk management are factors which can improve the quality of accounting information systems. In Indonesia this phenomenon happens in many organizations showing that there is disintegrated accounting information systems which then causes unqualified accounting information. This research was carried out in order to find out fact through examination presenting in the influence of business process and risk management towards accounting information system. Data used in this research were gained through survey by distributing questionnaires to company in indonesia. The data were then managed statistically by applying SEM PLS. Research method used was explanatory research. The result of this study shows that the problem in inqualified accounting information system occurs due to the business process and risk management is not entirely good as expected.

Designing a flood-risk education program in the Netherlands

NARCIS (Netherlands)

Bosschaert, A.; van der Schee, J.; Kuiper, W.

2016-01-01

This study focused on designing a flood-risk education program to enhance 15-year-old students’ flood-risk perception. In the flood-risk education program, learning processes were modeled in such a way that the arousal of moderate levels of fear should prompt experiential and analytical information

Supporting virtual enterprise design by a web-based information model

Science.gov (United States)

Li, Dong; Barn, Balbir; McKay, Alison; de Pennington, Alan

2001-10-01

Development of IT and its applications have led to significant changes in business processes. To pursue agility, flexibility and best service to customers, enterprises focus on their core competence and dynamically build relationships with partners to form virtual enterprises as customer driven temporary demand chains/networks. Building the networked enterprise needs responsively interactive decisions instead of a single-direction partner selection process. Benefits and risks in the combination should be systematically analysed, and aggregated information about value-adding abilities and risks of networks needs to be derived from interactions of all partners. In this research, a hierarchical information model to assess partnerships for designing virtual enterprises was developed. Internet technique has been applied to the evaluation process so that interactive decisions can be visualised and made responsively during the design process. The assessment is based on the process which allows each partner responds to requirements of the virtual enterprise by planning its operational process as a bidder. The assessment is then produced by making an aggregated value to represent prospect of the combination of partners given current bidding. Final design is a combination of partners with the greatest total value-adding capability and lowest risk.

Risk-Informing Safety Reviews for Non-Reactor Nuclear Facilities

Energy Technology Data Exchange (ETDEWEB)

Mubayi, V.; Azarm, A.; Yue, M.; Mukaddam, W.; Good, G.; Gonzalez, F.; Bari, R.A.

2011-03-13

This paper describes a methodology used to model potential accidents in fuel cycle facilities that employ chemical processes to separate and purify nuclear materials. The methodology is illustrated with an example that uses event and fault trees to estimate the frequency of a specific energetic reaction that can occur in nuclear material processing facilities. The methodology used probabilistic risk assessment (PRA)-related tools as well as information about the chemical reaction characteristics, information on plant design and operational features, and generic data about component failure rates and human error rates. The accident frequency estimates for the specific reaction help to risk-inform the safety review process and assess compliance with regulatory requirements.

Risk-Informing Safety Reviews for Non-Reactor Nuclear Facilities

International Nuclear Information System (INIS)

Mubayi, V.; Azarm, A.; Yue, M.; Mukaddam, W.; Good, G.; Gonzalez, F.; Bari, R.A.

2011-01-01

This paper describes a methodology used to model potential accidents in fuel cycle facilities that employ chemical processes to separate and purify nuclear materials. The methodology is illustrated with an example that uses event and fault trees to estimate the frequency of a specific energetic reaction that can occur in nuclear material processing facilities. The methodology used probabilistic risk assessment (PRA)-related tools as well as information about the chemical reaction characteristics, information on plant design and operational features, and generic data about component failure rates and human error rates. The accident frequency estimates for the specific reaction help to risk-inform the safety review process and assess compliance with regulatory requirements.

Moving along the risk-informed path - drivers and challenges

International Nuclear Information System (INIS)

Petrella, S.; Dermarkar, F.; Austman, D.; Chun, R.

2004-01-01

The use of risk criteria and information has always been an important component of the licensing of nuclear reactors in Ontario. Early applications included the development of Safety Design Matrices in the early 80's for more comprehensive design reviews, the use of the Darlington Probabilistic Safety Evaluation in the late-80's to support the C-6 event categorization process for the initial Darlington licensing, and the use of risk-insights, along with cost benefit criteria, to evaluate design options for the Pickering A special safety system design retrofits and modifications, such as Shutdown System (SDS) enhancement and Emergency Coolant Injection System (ECIS) upgrades. Operational uses have included the management of outage risk, the review of containment test frequencies, and the review of abnormal operating configurations such as maintenance of electrical power supplies. It is envisaged that such applications will continue, aided by the continued development of Probabilistic Risk Assessments techniques. To provide enhanced assurance of safety, to evaluate current and new safety-related issues as they arise, and to realize the full safety and economic benefits of risk-insights, OPG and Bruce Power have, along with their Industry partners, embarked on a path to further increase the use of risk-information in the operation and licensing of their reactors. Drivers include the resolution of long standing safety analysis issues surrounding LBLOCA analyses and generic action items, the application of risk-insights to guide the response to design, inspection, and analysis findings, and the optimization of operating, maintenance, and testing programs. As well, a major near term driver is input to plant refurbishment decisions. In moving to a more risk-informed approach to safety assessment, challenges include developing and implementing the required suite of concepts, tools, processes and criteria, and reconciling the current largely deterministic approach to safety

Information processing systems, reasoning modules, and reasoning system design methods

Science.gov (United States)

Hohimer, Ryan E; Greitzer, Frank L; Hampton, Shawn D

2014-03-04

Information processing systems, reasoning modules, and reasoning system design methods are described. According to one aspect, an information processing system includes working memory comprising a semantic graph which comprises a plurality of abstractions, wherein the abstractions individually include an individual which is defined according to an ontology and a reasoning system comprising a plurality of reasoning modules which are configured to process different abstractions of the semantic graph, wherein a first of the reasoning modules is configured to process a plurality of abstractions which include individuals of a first classification type of the ontology and a second of the reasoning modules is configured to process a plurality of abstractions which include individuals of a second classification type of the ontology, wherein the first and second classification types are different.

Information processing systems, reasoning modules, and reasoning system design methods

Energy Technology Data Exchange (ETDEWEB)

Hohimer, Ryan E.; Greitzer, Frank L.; Hampton, Shawn D.

2016-08-23

Information processing systems, reasoning modules, and reasoning system design methods are described. According to one aspect, an information processing system includes working memory comprising a semantic graph which comprises a plurality of abstractions, wherein the abstractions individually include an individual which is defined according to an ontology and a reasoning system comprising a plurality of reasoning modules which are configured to process different abstractions of the semantic graph, wherein a first of the reasoning modules is configured to process a plurality of abstractions which include individuals of a first classification type of the ontology and a second of the reasoning modules is configured to process a plurality of abstractions which include individuals of a second classification type of the ontology, wherein the first and second classification types are different.

Information processing systems, reasoning modules, and reasoning system design methods

Energy Technology Data Exchange (ETDEWEB)

Hohimer, Ryan E.; Greitzer, Frank L.; Hampton, Shawn D.

2015-08-18

Information processing systems, reasoning modules, and reasoning system design methods are described. According to one aspect, an information processing system includes working memory comprising a semantic graph which comprises a plurality of abstractions, wherein the abstractions individually include an individual which is defined according to an ontology and a reasoning system comprising a plurality of reasoning modules which are configured to process different abstractions of the semantic graph, wherein a first of the reasoning modules is configured to process a plurality of abstractions which include individuals of a first classification type of the ontology and a second of the reasoning modules is configured to process a plurality of abstractions which include individuals of a second classification type of the ontology, wherein the first and second classification types are different.

Information Design Theories

Science.gov (United States)

Pettersson, Rune

2014-01-01

Information design has practical and theoretical components. As an academic discipline we may view information design as a combined discipline, a practical theory, or as a theoretical practice. So far information design has incorporated facts, influences, methods, practices, principles, processes, strategies, and tools from a large number of…

Financial risk analysis in the synthesis and design of processing networks: Balancing risk and return

DEFF Research Database (Denmark)

Quaglia, Alberto; Sin, Gürkan; Gani, Rafiqul

2014-01-01

The construction of a processing network is a corporate investment, that processing companies make with the goal of creating the conditions to increase their value. In a previous work, a computer-aided framework supporting the design of processing network under uncertainty has been presented (Qua...... and financial risk models. Through the solution of a small benchmark problem, the impact of financial factors on the optimal network configuration is presented and discussed....

Risk-based determination of design pressure of LNG fuel storage tanks based on dynamic process simulation combined with Monte Carlo method

International Nuclear Information System (INIS)

Noh, Yeelyong; Chang, Kwangpil; Seo, Yutaek; Chang, Daejun

2014-01-01

This study proposes a new methodology that combines dynamic process simulation (DPS) and Monte Carlo simulation (MCS) to determine the design pressure of fuel storage tanks on LNG-fueled ships. Because the pressure of such tanks varies with time, DPS is employed to predict the pressure profile. Though equipment failure and subsequent repair affect transient pressure development, it is difficult to implement these features directly in the process simulation due to the randomness of the failure. To predict the pressure behavior realistically, MCS is combined with DPS. In MCS, discrete events are generated to create a lifetime scenario for a system. The combination of MCS with long-term DPS reveals the frequency of the exceedance pressure. The exceedance curve of the pressure provides risk-based information for determining the design pressure based on risk acceptance criteria, which may vary with different points of view. - Highlights: • The realistic operation scenario of the LNG FGS system is estimated by MCS. • In repeated MCS trials, the availability of the FGS system is evaluated. • The realistic pressure profile is obtained by the proposed methodology. • The exceedance curve provides risk-based information for determining design pressure

Risk-informed approach for safety, safeguards, and security (3S) by design

International Nuclear Information System (INIS)

Suzuki, Mitsutoshi; Burr, Tom; Howell, John

2011-01-01

Over several decades the nuclear energy society worldwide has developed safety assessment methodology based on probabilistic risk analysis for incorporating its benefit into design and accident prevention for nuclear reactors. Although safeguards and security communities have different histories and technical aspects compared to safety, risk assessment as a supplement to their current requirements could be developed to promote synergism between Safety, Safeguards, and Security (3S) and to install effective countermeasures in the design of complex nuclear fuel cycle facilities. Since the 3S initiative was raised by G8 countries at Hokkaido Toyako-Summit in 2008, one approach to developing synergism in a 3S By Design (3SBD) process has been the application of risk-oriented assessment methodology. In the existing regulations of safeguards and security, a risk notion has already been considered for inherent threat and hazard recognition. To integrate existing metrics into a risk-oriented approach, several mathematical methods have already been surveyed, with attention to the scarcity of intentional acts in the case of safeguards and the sparseness of actual event data. A two-dimensional probability distribution composed of measurement error and incidence probabilities has been proposed to formalize inherent difficulties in the International Atomic Energy Agency (IAEA) safeguards criteria. In particular, the incidence probability that is difficult to estimate has been explained using a Markov model and game theory. In this work, a feasibility study of 3SBD is performed for an aqueous reprocessing process, and synergetic countermeasures are presented for preliminary demonstration of 3SBD. Although differences and conflicts between individual 'S' communities exist, the integrated approach would be valuable for optimization and balance between the 3S design features as well as for effective and efficient implementation under existing regulation frameworks. In addition

Risk-based Process Development of Biosimilars as Part of the Quality by Design Paradigm.

Science.gov (United States)

Zalai, Dénes; Dietzsch, Christian; Herwig, Christoph

2013-01-01

In the last few years, several quality by design (QbD) studies demonstrated the benefit of systematic approaches for biopharmaceutical development. However, only very few studies identified biosimilars as a special case of product development. The targeted quality profile of biosimilars is strictly defined by the originator's product characteristic. Moreover, the major source of prior knowledge is the experience with the originator product itself. Processing this information in biosimilar development has a major effect on risk management and process development strategies. The main objective of this contribution is to demonstrate how risk management can facilitate the implementation of QbD in early-stage product development with special emphasis on fitting the reported approaches to biosimilars. Risk assessments were highlighted as important tools to integrate prior knowledge in biosimilar development. The risk assessment process as suggested by the International Conference on Harmonization (ICH Q9) was reviewed and three elements were identified to play a key role in targeted risk assessment approaches: proper understanding of target linkage, risk assessment tool compliance, and criticality threshold value. Adjusting these steps to biosimilar applications helped to address some unique challenges of these products such as a strictly defined quality profile or a lack of process knowledge. This contribution demonstrates the need for tailored risk management approaches for the risk-based development of biosimilars and provides novel tools for the integration of additional knowledge available for these products. The pharmaceutical industry is facing challenges such as profit loss and price competition. Companies are forced to rationalize business models and to cut costs in development as well as manufacturing. These trends recently hinder the implementation of any concepts that do not offer certain financial benefit or promise a long return of investment. Quality by

Improving emergency management through shared information processing - considerations in Emergency Operations Center design

International Nuclear Information System (INIS)

DeBusk, R.E.; Walker, J.A.

1987-01-01

An Emergency Operations Center (EOC) is a shared information processing facility. Although seemingly obvious, many EOCs are designed and operated based on other criteria. The results, measured in terms of response effectiveness, are difficult to determine. A review of some recent disasters reveals a pattern of poor performance for the EOCs involved. These conclusions are tentative because so little research has been done on the design, operation, or evaluation of emergency operations centers. The EOC is not an onsite response command post but a facility removed from the response where tactical and strategic decisions are made based on information from the response site and elsewhere. The EOC is therefore the central focus of emergency information processing and higher-level decision making. Examining existing EOCs, several common functions emerge. These functions can be described in terms of shared information processing. However, many factors impact the design and operation of EOCs. Politics, budgets, and personal ambition are only a few such factors. Examining EOC design and operation in terms of shared information processing operationalized in the seven principal functions within the EOC provides a framework for establishing principles of EOC design and operation. In the response to emergencies such as Bhopal or Chernobyl the stakes are high. Applying new techniques and technologies of management systems can improve the probability of success. This research is a beginning step - to understand how EOCs function, to define the system. Predictive or prescriptive analysis must wait until sufficient empirical data is available to complete a descriptive model for EOC operations

Leveraging health information exchange to improve population health reporting processes: lessons in using a collaborative-participatory design process.

Science.gov (United States)

Revere, Debra; Dixon, Brian E; Hills, Rebecca; Williams, Jennifer L; Grannis, Shaun J

2014-01-01

Surveillance, or the systematic monitoring of disease within a population, is a cornerstone function of public health. Despite significant investment in information technologies (IT) to improve the public's health, health care providers continue to rely on manual, spontaneous reporting processes that can result in incomplete and delayed surveillance activities. Participatory design principles advocate including real users and stakeholders when designing an information system to ensure high ecological validity of the product, incorporate relevance and context into the design, reduce misconceptions designers can make due to insufficient domain expertise, and ultimately reduce barriers to adoption of the system. This paper focuses on the collaborative and informal participatory design process used to develop enhanced, IT-enabled reporting processes that leverage available electronic health records in a health information exchange to prepopulate notifiable-conditions report forms used by public health authorities. Over nine months, public health stakeholders, technical staff, and informatics researchers were engaged in a multiphase participatory design process that included public health stakeholder focus groups, investigator-engineering team meetings, public health survey and census regarding high-priority data elements, and codesign of exploratory prototypes and final form mock-ups. A number of state-mandated report fields that are not highly used or desirable for disease investigation were eliminated, which allowed engineers to repurpose form space for desired and high-priority data elements and improve the usability of the forms. Our participatory design process ensured that IT development was driven by end user expertise and needs, resulting in significant improvements to the layout and functionality of the reporting forms. In addition to informing report form development, engaging with public health end users and stakeholders through the participatory design

Methods for formulation of design basis accidents within a risk-informed approach to safety regulation of new nuclear power plants

International Nuclear Information System (INIS)

Beer, B.C.; Apostolakis, G.E.; Golay, M.W.

2000-01-01

Within a project sponsored by the U.S. Department of Energy (DOE) an investigation is being conducted into creating a risk-informed safety regulatory framework and design process based upon the use of probabilistic risk assessment (PRA). In conjunction with efforts to formulate an overall regulatory framework (i.e., reported in PSAM 5 by F. Duran, A. Camp, G. Apostolakis and M. Golay, 'A Framework for Regulatory Requirements and Industry Standards for New Nuclear Power Plants'), this paper addresses the potential role(s) of Design Basis Accidents (DBAs) within this new framework. Currently that role, if any, is unclear. In previous nuclear safety regulatory treatments, DBAs have been of great practical value for both designers and regulators. However, they have suffered from being inconsistently formulated, and lacking fundamental justification. Any DBA set is likely to be formulated uniquely for a specific reactor concept. The staff of any nuclear power plant (NPP) in the U.S. routinely calculates the likelihood of core damage, the likelihood of radioactive release and the likelihood of adverse health effects due to radioactive release. As the accuracy of such estimates improves industry-wide, safety regulators consider weighing these calculated risks more heavily than strict adherence to the prescriptive conservatisms of existing regulations, hence risk-informed regulation. DBAs, despite their prescriptive nature, can remain useful tools for regulators and designers in a risk-informed regulatory framework, providing that they can be formulated in a fashion consistent with the risk profiles of a plant. DBAs also offer the opportunity to take into account factors of uncertainty not captured in a PRA, which are typically addressed via defense-in-depth features and subjective judgements. Designers seeking only to create a plant having a calculated risk below a certain value, while minimizing cost, may find themselves in an inefficient trial-and-error process as they

A completely new design and regulatory process - A risk-based approach for new nuclear power plants. Annex 17

International Nuclear Information System (INIS)

Ritterbusch, S.E.

2002-01-01

In the de-regulated electric power market place that is developing in the USA, competition from alternative electric power sources has provided significant downward pressure on the costs of new construction projects. Studies by the Electric Power Research Institute have shown that, in the USA, the capital cost of new nuclear plants must be decreased by at least 35% to 40% relative to the cost of Advanced Light Water Reactors designed in the early 1990s in order to be competitive with capital costs of gas-fired electric power plants. The underlying reasons for the high capital costs estimated for some nuclear plants are (1) long construction times, (2) the high level of 'defense-in-depth' or safety margin, included throughout the design and licensing process, and (3) the use of out-dated design methods and information. Probabilistic Safety Assessments are being used to develop a more accurate assessment of real plant risk and to provide relief if it can be demonstrated that plant equipment is not providing a significant contribution to plant safety. Westinghouse addressed some of these cost drivers in the development of the AP-600 passive plant design. However, because of relatively inexpensive natural gas plant alternative, we need to reduce the costs even further. Therefore, the AP-600 design is now being up-rated to a 1000 MWe design, AP-1000. The development of AP1000 is described in another paper being presented at this meeting. Westinghouse is also managing a project, sponsored by the US Department of Energy, which is aimed at developing an all-new 'risk-based' approach to design and regulation. Methodologies being developed use risk-based information to the extent practical and 'defense-in-depth' only when necessary to address uncertainties in models and equipment performance. Early results, summarized in this paper, include (1) the initial framework for a new design and regulatory process and (2) a sample design analysis which shows that the Emergency Core

Design participation as an insurance: risk-management and end-user participation in the development of information systems in healthcare organizations.

Science.gov (United States)

Vimarlund, V; Timpka, T

2002-01-01

The aim of this paper is to build a theoretical framework for analysis of when decision-makers should use end-user participation as a form of insurance for unforeseen consequences of implementing information systems in healthcare organizations. Data were collected in a case study of an information system development project in a small clinical setting. During the initial phase, the future end-users of the system were allowed to actively influence the system design and test every new tool that was considered for implementation. The results of the case study suggest that when time and effort are invested in allowing healthcare staff to participate in information system development processes, the benefits can well exceed the costs throughout the life cycle of the project. Risk-averse decision-makers fearing negative secondary consequences of a HIS, with regard to clinical work flow, will always adopt measures to prevent future failures, if they can find a possibility of shifting these risks. Therefore, they calculate the present discounted value of the effects accrued over time to the unit and predict the amount of resources they are willing to pay to acquire on insurance (such as design participation) that will protect the organization from future losses. End-user participation in the design process can be the key positive influence on the quality of the service and, thereby, organizational effectiveness. Investments in broad design participation can, consequently, be a productive activity that transforms potential current income into future benefits.

Design and Analysis: Payroll of Accounting Information System

Directory of Open Access Journals (Sweden)

Suryanto Suryanto

2011-05-01

Full Text Available Purpose of the research are to analyze, design, and recommended the payroll of accounting information system that support the internal control to solve the problem. Research methods used are book studies, field studies, and design studies. Fields studies done by survey and interview. The expected result are to give a review about the payroll of accounting information system in the ongoing business process of company and to solve all the weakness in the payroll system, so the company can use the integrated information system in counting of the payroll. Conclusion that can take from the research are there’s some manipulation risk of attendance data and documentation of form still using a manual system and simple data backup. Then, there’s also manipulation risk in allowance cash system and all the report that include in the payroll.Index Terms - Accounting Information System, Payroll

Outlook for risk assessment and risk-informed regulations

International Nuclear Information System (INIS)

Chakraborty, S.; Breutel, C.; Khatib-Rahbar, M.

2000-01-01

The Western nuclear regulatory process has evolved from the initial engineering judgment' framework of the 1960's, the prescriptive deterministic requirements of the 1970s, the transition years of the 1980s, to the present day movement toward risk-informed approaches. In this paper, a short overview of the historic development of safety regulation is provided. The critique of traditional regulatory practice will be summarized and the features of risk-informed regulation will be discussed. The implementation of risk-informed regulation is considered on the basis of general legal principles common to many member states of the NEA and IAEA. In a process to risk-inform regulation, principles such as equal treatment, proportionality of rules and predictability of administrative action are found to be important. (author)

RISK-INFORMED BALANCING OF SAFETY, NONPROLIFERATION, AND ECONOMICS FOR THE SFR

Energy Technology Data Exchange (ETDEWEB)

Apostolakis, George; Driscoll, Michael; Golay, Michael; Kadak, Andrew; Todreas, Neil; Aldmir, Tunc; Denning, Richard; Lineberry, Michael

2011-10-20

A substantial barrier to the implementation of Sodium-cooled Fast Reactor (SFR) technology in the short term is the perception that they would not be economically competitive with advanced light water reactors. With increased acceptance of risk-informed regulation, the opportunity exists to reduce the costs of a nuclear power plant at the design stage without applying excessive conservatism that is not needed in treating low risk events. In the report, NUREG-1860, the U.S. Nuclear Regulatory Commission describes developmental activities associated with a risk-informed, scenario-based technology neutral framework (TNF) for regulation. It provides quantitative yardsticks against which the adequacy of safety risks can be judged. We extend these concepts to treatment of proliferation risks. The objective of our project is to develop a risk-informed design process for minimizing the cost of electricity generation within constraints of adequate safety and proliferation risks. This report describes the design and use of this design optimization process within the context of reducing the capital cost and levelized cost of electricity production for a small (possibly modular) SFR. Our project provides not only an evaluation of the feasibility of a risk-informed design process but also a practical test of the applicability of the TNF to an actual advanced, non-LWR design. The report provides results of five safety related and one proliferation related case studies of innovative design alternatives. Applied to previously proposed SFR nuclear energy system concepts We find that the TNF provides a feasible initial basis for licensing new reactors. However, it is incomplete. We recommend improvements in terms of requiring acceptance standards for total safety risks, and we propose a framework for regulation of proliferation risks. We also demonstrate methods for evaluation of proliferation risks. We also suggest revisions to scenario-specific safety risk acceptance standards

Risk-Informed Balancing Of Safety, Nonproliferation, And Economics For The SFR

International Nuclear Information System (INIS)

Apostolakis, George; Driscoll, Michael; Golay, Michael; Kadak, Andrew; Todreas, Neil; Aldmir, Tunc; Denning, Richard; Lineberry, Michael

2011-01-01

A substantial barrier to the implementation of Sodium-cooled Fast Reactor (SFR) technology in the short term is the perception that they would not be economically competitive with advanced light water reactors. With increased acceptance of risk-informed regulation, the opportunity exists to reduce the costs of a nuclear power plant at the design stage without applying excessive conservatism that is not needed in treating low risk events. In the report, NUREG-1860, the U.S. Nuclear Regulatory Commission describes developmental activities associated with a risk-informed, scenario-based technology neutral framework (TNF) for regulation. It provides quantitative yardsticks against which the adequacy of safety risks can be judged. We extend these concepts to treatment of proliferation risks. The objective of our project is to develop a risk-informed design process for minimizing the cost of electricity generation within constraints of adequate safety and proliferation risks. This report describes the design and use of this design optimization process within the context of reducing the capital cost and levelized cost of electricity production for a small (possibly modular) SFR. Our project provides not only an evaluation of the feasibility of a risk-informed design process but also a practical test of the applicability of the TNF to an actual advanced, non-LWR design. The report provides results of five safety related and one proliferation related case studies of innovative design alternatives. Applied to previously proposed SFR nuclear energy system concepts We find that the TNF provides a feasible initial basis for licensing new reactors. However, it is incomplete. We recommend improvements in terms of requiring acceptance standards for total safety risks, and we propose a framework for regulation of proliferation risks. We also demonstrate methods for evaluation of proliferation risks. We also suggest revisions to scenario-specific safety risk acceptance standards

A risk-informed framework for establishing a beyond design basis safety basis for external hazards

Energy Technology Data Exchange (ETDEWEB)

Amico, P. [Hughes Associates, Inc, Baltimore, MD (United States); Anoba, R. [Hughes Associates, Inc, Raleigh, NC (United States); Najafi, B. [Hughes Associates, Inc., Los Gatos, CA (United States)

2014-07-01

The events at Fukushima Daiichi taught us that meeting a deterministic design basis requirement for external hazards does not assure that the risk is low. As observed at the plant, the two primary reasons for this are failure cliffs above the design basis event and that combined hazard effects are not considered in design. Because the possible combinations of design basis exceedences and external hazard combinations are very large and complex, an approach focusing only on the most important ones is needed. For this reason, a risk informed approach is the most effective approach, which is discussed in this paper. (author)

People-oriented Information Visualization Design

Science.gov (United States)

Chen, Zhiyong; Zhang, Bolun

2018-04-01

In the 21st century with rapid development, in the wake of the continuous progress of science and technology, human society enters the information era and the era of big data, and the lifestyle and aesthetic system also change accordingly, so the emerging field of information visualization is increasingly popular. Information visualization design is the process of visualizing all kinds of tedious information data, so as to quickly accept information and save time-cost. Along with the development of the process of information visualization, information design, also becomes hotter and hotter, and emotional design, people-oriented design is an indispensable part of in the design of information. This paper probes information visualization design through emotional analysis of information design based on the social context of people-oriented experience from the perspective of art design. Based on the three levels of emotional information design: instinct level, behavior level and reflective level research, to explore and discuss information visualization design.

The Emotional Information Processing System is Risk Averse: Ego-Depletion and Investment Behavior

NARCIS (Netherlands)

B. de Langhe (Bart); S.T.L.R. Sweldens (Steven); S.M.J. van Osselaer (Stijn); M.A. Tuk (Mirjam)

2008-01-01

textabstractTwo experiments show that a shortage of self-regulatory resources results in more risk aversion in mixed-gamble (gain/loss) situations. The findings support a dual process view that distinguishes between a rational and an affective information processing system, in which self-regulatory

The earthquake problem in engineering design: generating earthquake design basis information

International Nuclear Information System (INIS)

Sharma, R.D.

1987-01-01

Designing earthquake resistant structures requires certain design inputs specific to the seismotectonic status of the region, in which a critical facility is to be located. Generating these inputs requires collection of earthquake related information using present day techniques in seismology and geology, and processing the collected information to integrate it to arrive at a consolidated picture of the seismotectonics of the region. The earthquake problem in engineering design has been outlined in the context of a seismic design of nuclear power plants vis a vis current state of the art techniques. The extent to which the accepted procedures of assessing seismic risk in the region and generating the design inputs have been adherred to determine to a great extent the safety of the structures against future earthquakes. The document is a step towards developing an aproach for generating these inputs, which form the earthquake design basis. (author)

A Framework for an Integrated Risk Informed Decision Making Process. INSAG-25. A Report by the International Nuclear Safety Group

International Nuclear Information System (INIS)

2014-01-01

There is general international agreement, as reflected in various IAEA Safety Standards on nuclear reactor design and operation, that both deterministic and probabilistic analyses contribute to reactor safety by providing insights, perspective, comprehension and balance. Accordingly, the integration of deterministic and probabilistic analyses is increasing to support design, safety evaluation and operations. Additionally, application of these approaches to physical security is now being considered by several Member States. Deterministic and probabilistic analyses yield outputs that are complementary to each other. There is thus a need to use a structured framework for consideration of deterministic and probabilistic techniques and findings. In this process, it is appropriate to encourage a balance between deterministic approaches, probabilistic analyses and other factors (see Section 3) in order to achieve an integrated decision making process that serves in an optimal fashion to ensure nuclear reactor safety. This report presents such a framework - a framework that is termed 'integrated risk informed decision making' (IRIDM). While the details of IRIDM methods may change with better understanding of the subject, the framework presented in this report is expected to apply for the foreseeable future. IRIDM depends on the integration of a wide variety of information, insights and perspectives, as well as the commitment of designers, operators and regulatory authorities ers, operators and regulatory authorities to use risk information in their decisions. This report thus focuses on key IRIDM aspects, as well considerations that bear on their application which should be taken into account in order to arrive at sound risk informed decisions. This report is intended to be in harmony with the IAEA Safety Standards and various INSAG reports relating to safety assessment and verification, and seeks to convey an appropriate approach to enhance nuclear reactor safety

A Framework for an Integrated Risk Informed Decision Making Process. INSAG-25. A Report by the International Nuclear Safety Group

International Nuclear Information System (INIS)

2011-01-01

There is general international agreement, as reflected in various IAEA Safety Standards on nuclear reactor design and operation, that both deterministic and probabilistic analyses contribute to reactor safety by providing insights, perspective, comprehension and balance. Accordingly, the integration of deterministic and probabilistic analyses is increasing to support design, safety evaluation and operations. Additionally, application of these approaches to physical security is now being considered by several Member States. Deterministic and probabilistic analyses yield outputs that are complementary to each other. There is thus a need to use a structured framework for consideration of deterministic and probabilistic techniques and findings. In this process, it is appropriate to encourage a balance between deterministic approaches, probabilistic analyses and other factors (see Section 3) in order to achieve an integrated decision making process that serves in an optimal fashion to ensure nuclear reactor safety. This report presents such a framework - a framework that is termed 'integrated risk informed decision making' (IRIDM). While the details of IRIDM methods may change with better understanding of the subject, the framework presented in this report is expected to apply for the foreseeable future. IRIDM depends on the integration of a wide variety of information, insights and perspectives, as well as the commitment of designers, operators and regulatory authorities to use risk information in their decisions. This report thus focuses on key IRIDM aspects, as well considerations that bear on their application which should be taken into account in order to arrive at sound risk informed decisions. This report is intended to be in harmony with the IAEA Safety Standards and various INSAG reports relating to safety assessment and verification, and seeks to convey an appropriate approach to enhance nuclear reactor safety

Risk-informed assessment of regulatory and design requirements for future nuclear power plants. Annual report

International Nuclear Information System (INIS)

2000-01-01

OAK B188 Risk-informed assessment of regulatory and design requirements for future nuclear power plants. Annual report. The overall goal of this research project is to support innovation in new nuclear power plant designs. This project is examining the implications, for future reactors and future safety regulation, of utilizing a new risk-informed regulatory system as a replacement for the current system. This innovation will be made possible through development of a scientific, highly risk-formed approach for the design and regulation of nuclear power plants. This approach will include the development and/or confirmation of corresponding regulatory requirements and industry standards. The major impediment to long term competitiveness of new nuclear plants in the U.S. is the capital cost component--which may need to be reduced on the order of 35% to 40% for Advanced Light Water Reactors (ALWRS) such as System 80+ and Advanced Boiling Water Reactor (ABWR). The required cost reduction for an ALWR such as AP600 or AP1000 would be expected to be less. Such reductions in capital cost will require a fundamental reevaluation of the industry standards and regulatory bases under which nuclear plants are designed and licensed. Fortunately, there is now an increasing awareness that many of the existing regulatory requirements and industry standards are not significantly contributing to safety and reliability and, therefore, are unnecessarily adding to nuclear plant costs. Not only does this degrade the economic competitiveness of nuclear energy, it results in unnecessary costs to the American electricity consumer. While addressing these concerns, this research project will be coordinated with current efforts of industry and NRC to develop risk-informed, performance-based regulations that affect the operation of the existing nuclear plants; however, this project will go further by focusing on the design of new plants

Risk-informed assessment of regulatory and design requirements for future nuclear power plants. Annual report

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-08-01

OAK B188 Risk-informed assessment of regulatory and design requirements for future nuclear power plants. Annual report. The overall goal of this research project is to support innovation in new nuclear power plant designs. This project is examining the implications, for future reactors and future safety regulation, of utilizing a new risk-informed regulatory system as a replacement for the current system. This innovation will be made possible through development of a scientific, highly risk-formed approach for the design and regulation of nuclear power plants. This approach will include the development and/or confirmation of corresponding regulatory requirements and industry standards. The major impediment to long term competitiveness of new nuclear plants in the U.S. is the capital cost component--which may need to be reduced on the order of 35% to 40% for Advanced Light Water Reactors (ALWRS) such as System 80+ and Advanced Boiling Water Reactor (ABWR). The required cost reduction for an ALWR such as AP600 or AP1000 would be expected to be less. Such reductions in capital cost will require a fundamental reevaluation of the industry standards and regulatory bases under which nuclear plants are designed and licensed. Fortunately, there is now an increasing awareness that many of the existing regulatory requirements and industry standards are not significantly contributing to safety and reliability and, therefore, are unnecessarily adding to nuclear plant costs. Not only does this degrade the economic competitiveness of nuclear energy, it results in unnecessary costs to the American electricity consumer. While addressing these concerns, this research project will be coordinated with current efforts of industry and NRC to develop risk-informed, performance-based regulations that affect the operation of the existing nuclear plants; however, this project will go further by focusing on the design of new plants.

Process-aware information systems : design, enactment and analysis

NARCIS (Netherlands)

Aalst, van der W.M.P.; Wah, B.W.

2009-01-01

Process-aware information systems support operational business processes by combining advances in information technology with recent insights from management science. Workflow management systems are typical examples of such systems. However, many other types of information systems are also "process

Risk-Informed Monitoring, Verification and Accounting (RI-MVA). An NRAP White Paper Documenting Methods and a Demonstration Model for Risk-Informed MVA System Design and Operations in Geologic Carbon Sequestration

Energy Technology Data Exchange (ETDEWEB)

Unwin, Stephen D.; Sadovsky, Artyom; Sullivan, E. C.; Anderson, Richard M.

2011-09-30

This white paper accompanies a demonstration model that implements methods for the risk-informed design of monitoring, verification and accounting (RI-MVA) systems in geologic carbon sequestration projects. The intent is that this model will ultimately be integrated with, or interfaced with, the National Risk Assessment Partnership (NRAP) integrated assessment model (IAM). The RI-MVA methods described here apply optimization techniques in the analytical environment of NRAP risk profiles to allow systematic identification and comparison of the risk and cost attributes of MVA design options.

Design to Robotic Production for Informed Materialization Processes

Directory of Open Access Journals (Sweden)

Sina Mostafavi

2017-12-01

Full Text Available Design to Robotic Production (D2RP establishes links between digital design and production in order to achieve informed materialization at an architectural scale. D2RP research is being discussed under the computation, automation and materialization themes, by reference to customizable digital design means, robotic fabrication setups and informed materialization strategies implemented by the Robotic Building group at Hyperbody, TU Delft.

A Configurable Surface-Electrode Ion Trap Design for Quantum Information Processing

International Nuclear Information System (INIS)

Liu Wei; Chen Shu-Ming; Chen Ping-Xing; Wu Wei

2013-01-01

We propose a configurable surface-electrode ion trap design to alleviate the poor reusability of the existing traps. It can architecturally and electrically support 5 mainstream modes by design reuse, thus enhancing the trap reusability and reducing the experiment setup overhead. We also develop a corresponding simulation suite which can optimize trap geometries and calculate trap parameters to control the trapped ion's classic motion. According to our analytical and simulated results, the configurable design can serve as a unified platform for basic research of large-scale quantum information processing

LOD BIM Element specification for Railway Turnout Systems Risk Mitigation using the Information Delivery Manual

Science.gov (United States)

Gigante-Barrera, Ángel; Dindar, Serdar; Kaewunruen, Sakdirat; Ruikar, Darshan

2017-10-01

Railway turnouts are complex systems designed using complex geometries and grades which makes them difficult to be managed in terms of risk prevention. This feature poses a substantial peril to rail users as it is considered a cause of derailment. In addition, derailment deals to financial losses due to operational downtimes and monetary compensations in case of death or injure. These are fundamental drivers to consider mitigating risks arising from poor risk management during design. Prevention through design (PtD) is a process that introduces tacit knowledge from industry professionals during the design process. There is evidence that Building Information Modelling (BIM) can help to mitigate risk since the inception of the project. BIM is considered an Information System (IS) were tacit knowledge can be stored and retrieved from a digital database making easy to take promptly decisions as information is ready to be analysed. BIM at the model element level entails working with 3D elements and embedded data, therefore adding a layer of complexity to the management of information along the different stages of the project and across different disciplines. In order to overcome this problem, the industry has created a framework for model progression specification named Level of Development (LOD). The paper presents an IDM based framework for design risk mitigation through code validation using the LOD. This effort resulted on risk datasets which describe graphically and non-graphically a rail turnout as the model progresses. Thus, permitting its inclusion within risk information systems. The assignment of an LOD construct to a set of data, requires specialised management and process related expertise. Furthermore, the selection of a set of LOD constructs requires a purpose based analysis. Therefore, a framework for LOD constructs implementation within the IDM for code checking is required for the industry to progress in this particular field.

Information Processing and Risk Perception: An Adaptation of the Heuristic-Systematic Model.

Science.gov (United States)

Trumbo, Craig W.

2002-01-01

Describes heuristic-systematic information-processing model and risk perception--the two major conceptual areas of the analysis. Discusses the proposed model, describing the context of the data collections (public health communication involving cancer epidemiology) and providing the results of a set of three replications using the proposed model.…

Usability and Visual Communication for Southern California Tsunami Evacuation Information: The importance of information design in disaster risk management

Science.gov (United States)

Jaenichen, C.; Schandler, S.; Wells, M.; Danielsen, T.

2015-12-01

Evacuation behavior, including participation and response, is rarely an individual and isolated process and the outcomes are usually systemic. Ineffective evacuation information can easily attribute to delayed evacuation response. Delays increase demands on already extended emergency personal, increase the likelihood of traffic congestion, and can cause harm to self and property. From an information design perspective, addressing issues in cognitive recall and emergency psychology, this case study examines evacuation messaging including written, audio, and visual presentation of information, and describes the application of design principles and role of visual communication for Southern California tsunami evacuation outreach. The niche of this project is the inclusion of cognitive processing as the driving influence when making formal design decisions and measurable data from a 4-year cognitive recall study to support the solution. Image included shows a tsunami evacaution map before and after the redesign.

Radon risk information and voluntary protection: evidence from a natural experiment

International Nuclear Information System (INIS)

Johnson, F.R.; Luken, R.A.

1987-01-01

This study examines the perceived risks and mitigating behavior of Maine households who received new information on their exposures to significant health risks from indoor radon. The observed responses of these households illustrate conceptual issues related to designing an effective risk information program. Despite the involvement of generally well-motivated homeowners and well-intentioned researchers and government officials, we conclude that the risk information approach used in Maine failed to induce appropriate, cost-effective voluntary protection. The results indicate that, after receiving radon test results, information on associated health risks, and suggestions on how to reduce exposures: perceived risks tended to understate objective risks by orders of magnitude, and there was no statistically significant relationship between mitigating behavior and objective risks. These results suggest that the formation of risk perceptions and subsequent behavioral adjustments involve complex interactions among information, contextual, socioeconomic, and psychological variables. Therefore, government programs that seek to reduce health and safety risks with information programs, instead of using more conventional enforced standards, must be crafted very carefully to accommodate this complex process

Proposal for an integrated risk informed decision making process for German regulators

International Nuclear Information System (INIS)

Einarsson, Svante; Wielenberg, Andreas

2013-01-01

Regulatory decisions for German nuclear power plants (NPP) have traditionally been based on deterministic safety analyses. However, the IRRS-Mission of IAEA in 2008 proposed, among others, in 'Suggestion 25' to develop a national policy 'on the use of risk insights in the regulatory framework and decision making'. Consequently, the German Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU) launched a project with the goal of developing a proposal for a uniform federal approach on using risk information in decision making. To this end, the state of the application of probabilistic and risk informed methods has been investigated both on an international and a national level. On the international level, the concept of Integrated Risk Informed Decision Making (IRIDM) has been defined in INSAG-25. It is a structured process, in which all knowledge and requirements relevant to the issue in question are to be considered in a decision. Such knowledge and other requirements are e.g. deterministic and probabilistic safety analyses, regulatory requirements and other applicable findings (including cost-benefit analyses). The IRIDM concept according to INSAG-25 is the cornerstone of the proposal for a uniform federal German approach for IRIDM in the regulatory framework for nuclear installations in Germany. (orig.)

Communications about environmental risks and risk-reducing behaviour : the impact of fear on information processing.

NARCIS (Netherlands)

Meijnders, A.L.; Midden, C.J.H.; Wilke, H.A.M.

2001-01-01

The present experiment examined the impact of fear on attitudes and the mediating role of information processing. Fear and argument strength were manipulated according to a 3 × 2 (Fear: Control vs. Moderate Fear vs. High Fear × Arguments: Weak vs. Strong) between-subjects design. Fear was aroused

Risk-informing safety reviews for non-reactor nuclear facilities: an example application

International Nuclear Information System (INIS)

Mubayi, V.; Yue, M.; Bari, R.A.; Azarm, M.A.; Mukaddam, W.; Good, G.; Gonzalez, F.

2013-01-01

This paper describes a methodology used to model potential accidents in fuel cycle facilities that employ chemical processes to separate and purify nuclear materials. The methodology is illustrated with an example that uses event and fault trees to estimate the frequency of a specific energetic reaction that can occur in nuclear material processing facilities. The methodology used probabilistic risk assessment (PRA)-related tools as well as information about the chemical reaction characteristics, information on plant design and operational features, and generic data about component failure rates and human error rates. The accident frequency estimates for the specific reaction can be useful to help to risk-inform a safety review process and assess compliance with regulatory requirements. (authors)

Analysis and design on airport safety information management system

Directory of Open Access Journals (Sweden)

Yan Lin

2017-01-01

Full Text Available Airport safety information management system is the foundation of implementing safety operation, risk control, safety performance monitor, and safety management decision for the airport. The paper puts forward the architecture of airport safety information management system based on B/S model, focuses on safety information processing flow, designs the functional modules and proposes the supporting conditions for system operation. The system construction is helpful to perfecting the long effect mechanism driven by safety information, continually increasing airport safety management level and control proficiency．

Methodology of life cycle cost with risk expenditure for offshore process at conceptual design stage

International Nuclear Information System (INIS)

Nam, Kiil; Chang, Daejun; Chang, Kwangpil; Rhee, Taejin; Lee, In-Beum

2011-01-01

This study proposed a new LCC (life cycle cost) methodology with the risk expenditure taken into account for comparative evaluation of offshore process options at their conceptual design stage. The risk expenditure consisted of the failure risk expenditure and the accident risk expenditure. The former accounted for the production loss and the maintenance expense due to equipment failures while the latter reflected the asset damage and the fatality worth caused by disastrous accidents such as fire and explosion. It was demonstrated that the new LCC methodology was capable of playing the role of a process selection basis in choosing the best of the liquefaction process options including the power generation systems for a floating LNG (Liquefied natural gas) production facility. Without the risk expenditure, a simple economic comparison apparently favored the mixed refrigerant cycle which had the better efficiency. The new methodology with the risk expenditure, however, indicated that the nitrogen expansion cycle driven by steam turbines should be the optimum choice, mainly due to its better availability and safety. -- Highlights: → The study presented the methodology of the LCC with the risk expenditure for the conceptual design of offshore processes. → The proposed methodology demonstrated the applicability of the liquefaction unit with the power generation system of LNG FPSO. → Without the risk expenditure, a simple economic comparison apparently favored the mixed refrigerant cycle which had the better efficiency. → The new methodology indicated that the nitrogen expansion cycle driven by steam turbines is the optimum choice due to its better availability and safety.

Design and demonstration of a multitechnology FPGA for photonic information processing

Science.gov (United States)

Mal, Prosenjit; Hawk, Chris; Toshniwal, Kavita; Beyette, Fred R., Jr.

2003-11-01

We present here a novel architecture for a multi-technology field programmabler gate array (MT-FPGA). Implemented with a conventional CMOS VLSI technology the architecture is suitable for prototyping photonic information processing systems. We report here that this new FPGA architecture will enable the design of reconfigurable systems that incorporate technologies outside the traditional electronic domain.

Decision making for wildfires: A guide for applying a risk management process at the incident level

Science.gov (United States)

Mary A. Taber; Lisa M. Elenz; Paul G. Langowski

2013-01-01

This publication focuses on the thought processes and considerations surrounding a risk management process for decision making on wildfires. The publication introduces a six element risk management cycle designed to encourage sound risk-informed decision making in accordance with Federal wildland fire policy, although the process is equally applicable to non-Federal...

Plant risk status information management system

International Nuclear Information System (INIS)

Campbell, D.J.; Ellison, B.C.; Glynn, J.C.; Flanagan, G.F.

1985-01-01

The Plant Risk Status Information Management System (PRISIMS) is a PC program that presents information about a nuclear power plant's design, its operation, its technical specifications, and the results of the plant's probabilistic risk assessment (PRA) in a logically and easily accessible format. PRISIMS provides its user with unique information for integrating safety concerns into day-to-day operational decisions and/or long-range management planning

Regulatory approach to risk informed decision making in India

International Nuclear Information System (INIS)

Chande, S.K.; Koley, J.

2001-01-01

Atomic Energy Regulatory Board (AERB), the authority for licensing and monitoring safety in Indian Nuclear Power Plants (NPPs), makes use of insights gained from PSA together with the results of the other deterministic analyses in taking decisions regarding the acceptability of the safety of the NPPs. PSA provides an estimation of risks; it also gives information on a balanced design by revealing interaction between engineered features and weak areas in a design. For regulatory use, PSA needs to be carried out using standardized methodology and state of the art technology. PSA helps regulators in taking faster and consistent decisions. Keeping in mind the limitations associated with PSA study, AERB has decided to adopt risk-informed decision making in regulatory licensing process. This paper describes the AERB policy regarding PSA and gives an overview of the experience in this area. (author)

Information and Risk Modification Trial (INFORM): design of a randomised controlled trial of communicating different types of information about coronary heart disease risk, alongside lifestyle advice, to achieve change in health-related behaviour.

Science.gov (United States)

Silarova, Barbora; Lucas, Joanne; Butterworth, Adam S; Di Angelantonio, Emanuele; Girling, Christine; Lawrence, Kathryn; Mackintosh, Stuart; Moore, Carmel; Payne, Rupert A; Sharp, Stephen J; Shefer, Guy; Tolkien, Zoe; Usher-Smith, Juliet; Walker, Matthew; Danesh, John; Griffin, Simon

2015-09-07

Cardiovascular disease (CVD) remains the leading cause of death globally. Primary prevention of CVD requires cost-effective strategies to identify individuals at high risk in order to help target preventive interventions. An integral part of this approach is the use of CVD risk scores. Limitations in previous studies have prevented reliable inference about the potential advantages and the potential harms of using CVD risk scores as part of preventive strategies. We aim to evaluate short-term effects of providing different types of information about coronary heart disease (CHD) risk, alongside lifestyle advice, on health-related behaviours. In a parallel-group, open randomised trial, we are allocating 932 male and female blood donors with no previous history of CVD aged 40-84 years in England to either no intervention (control group) or to one of three active intervention groups: i) lifestyle advice only; ii) lifestyle advice plus information on estimated 10-year CHD risk based on phenotypic characteristics; and iii) lifestyle advice plus information on estimated 10-year CHD risk based on phenotypic and genetic characteristics. The primary outcome is change in objectively measured physical activity. Secondary outcomes include: objectively measured dietary behaviours; cardiovascular risk factors; current medication and healthcare usage; perceived risk; cognitive evaluation of provision of CHD risk scores; and psychological outcomes. The follow-up assessment takes place 12 weeks after randomisation. The experiences, attitudes and concerns of a subset of participants will be also studied using individual interviews and focus groups. The INFORM study has been designed to provide robust findings about the short-term effects of providing different types of information on estimated 10-year CHD risk and lifestyle advice on health-related behaviours. Current Controlled Trials ISRCTN17721237 . Registered 12 January 2015.

Success and failure factors in the regional health information system design process--results from a constructive evaluation study.

Science.gov (United States)

Nykänen, P; Karimaa, E

2006-01-01

To identify success and failure factors in the design process of a regional health information system. A constructive evaluation study including interviews, observations, usability study and document analysis. Modelling was found to be a key element for the successful implementation of a health information system. The developed service chain model helped to define use cases and to implement seamless service chains. User participation in the design process was a success factor resulting in good user acceptance and signs of positive impacts on work practices. Evaluation study also helped system developers to guide the system's further development. An important failure factor identified was the lack of semantic interoperability of the system components. The results emphasize the socio-technical nature of health information systems. The starting point for development should be thorough insight into the health care work practices where the information systems are to be used. Successful system design should start from modelling of work processes, data and information flows and definition of concepts and their relations. Health informatics as a scientific discipline provides theories and models for the design and development process.

Aligning Business Process Quality and Information System Quality

OpenAIRE

Heinrich, Robert

2013-01-01

Business processes and information systems mutually affect each other in non-trivial ways. Frequently, the business process design and the information system design are not well aligned. This means that business processes are designed without taking the information system impact into account, and vice versa. Missing alignment at design time often results in quality problems at runtime, such as large response times of information systems, large process execution times, overloaded information s...

Sustainable Manufacturing via Multi-Scale, Physics-Based Process Modeling and Manufacturing-Informed Design

Energy Technology Data Exchange (ETDEWEB)

None

2017-04-01

This factsheet describes a project that developed and demonstrated a new manufacturing-informed design framework that utilizes advanced multi-scale, physics-based process modeling to dramatically improve manufacturing productivity and quality in machining operations while reducing the cost of machined components.

Participatory Design & Health Information Technology

DEFF Research Database (Denmark)

Health Information Technology (HIT) continues to increase in importance as a component of healthcare provision, but designing HIT is complex. The creation of cooperative learning processes for future HIT users is not a simple task. The importance of engaging end users such as health professionals......, in collaboration with a wide range of people, a broad repertoire of methods and techniques to apply PD within multiple domains has been established. This book, Participatory Design & Health Information Technology, presents the contributions of researchers from 5 countries, who share their experience and insights......, patients and relatives in the design process is widely acknowledged, and Participatory Design (PD) is the primary discipline for directly involving people in the technological design process. Exploring the application of PD in HIT is crucial to all those involved in engaging end users in HIT design and...

Increase plant safety and reduce cost by implementing risk-informed in-service inspection programs

International Nuclear Information System (INIS)

Billington, A.; Monette, P.

2001-01-01

The idea behind the program is that it is possible to 'inspect less, but inspect better'. In other words, the risk-informed In-Service Inspection (ISI) process is used to improve the effectiveness of examination of piping components, i.e. concentrate inspection resources and enhance inspection strategies on high safety significant locations, and reduce inspection requirements on others. The Westinghouse Owners Group (WOG) risk-informed ISI process has already been applied for full scope (Millstone 3, Surry 1) and limited scope (Beznau, Ringhals 4, Asco, Turkey Point 3). By examining the high safety significant piping segments for the different fluid piping systems, the total piping core damage frequency is reduced. In addition, more than 80% of the risk associated with potential pressure boundary failures is addressed with the WOG risk-informed ISI process, while typically less that 50% of this same risk is addressed by the current inspection programs. The risk-informed ISI processes are used to improve the effectiveness of inspecting safety-significant piping components, to reduce inspection requirements on other piping components, to evaluate improvements to plant availability and enhanced safety measures, including reduction of personnel radiation exposure, and to reduce overall Operation and Maintenance (O and M) costs while maintaining regulatory compliance. A description of the process as well as benefits from past projects is presented, since the methodology is applicable for WWER plant design. (author)

Increase plant safety and reduce cost by implementing risk-informed In-Service Inspection programs

International Nuclear Information System (INIS)

Billington, A.; Monette, P.; Doumont, C.

2000-01-01

The idea behind the program is that it is possible to 'inspect less, but inspect better'. In other words, the risk-informed In-Service Inspection (ISI) process is used to improve the effectiveness of examination of piping components, i.e. concentrate inspection resources and enhance inspection strategies on high safety significant locations, and reduce inspection requirements on others. The Westinghouse Owners Group (WOG) risk-informed ISI process has already been applied for full scope (Millstone 3, Surry 1) and limited scope (Beznau, Ringhals 4, Asco, Turkey Point 3). By examining the high safety significant piping segments for the different fluid piping systems, the total piping core damage frequency is reduced. In addition, more than 80% of the risk associated with potential pressure boundary failures is addressed with the WOG risk-informed ISI process, while typically less than 50% of this same risk is addressed by the current inspection programs. The risk-informed ISI processes are used: to improve the effectiveness of inspecting safety-significant piping components; to reduce inspection requirements on other piping components; to evaluate improvements to plant availability and enhanced safety measures, including reduction of personnel radiation exposure; and to reduce overall Operation and Maintenance (O and M) costs while maintaining regulatory compliance. A description of the process as well as benefits of past projects is presented, since the methodology is applicable for VVER plant design. (author)

Risk Informed Assessment of Regulatory and Design Requirements for Future Nuclear Power Plants (Cooperative Agreement DE-FC03-99SF21902, Am. M004) Final Technical Report

International Nuclear Information System (INIS)

Ritterbusch, Stanley E.

2003-01-01

OAK-B135 Research under this project addresses the barriers to long term use of nuclear-generated electricity in the United States. It was agreed that a very basic and significant change to the current method of design and regulation was needed. That is, it was believed that the cost reduction goal could not be met by fixing the current system (i.e., an evolutionary approach) and a new, more advanced approach for this project would be needed. It is believed that a completely new design and regulatory process would have to be developed--a ''clean sheet of paper'' approach. This new approach would start with risk-based methods, would establish probabilistic design criteria, and would implement defense-in-depth only when necessary (1) to meet public policy issues (e.g., use of a containment building no matter how low the probability of a large release is) and (2) to address uncertainties in probabilistic methods and equipment performance. This new approach is significantly different from the Nuclear Regulatory Commission's (NRC) current risk-informed program for operating plants. For our new approach, risk-based methods are the primary means for assuring plant safety, whereas in the NRC's current approach, defense-in-depth remains the primary means of assuring safety. The primary accomplishments in the first year--Phase 1 were (1) the establishment of a new, highly risk-informed design and regulatory framework, (2) the establishment of the preliminary version of the new, highly risk-informed design process, (3) core damage frequency predictions showing that, based on new, lower pipe rupture probabilities, the design of the emergency core cooling system equipment can be simplified without reducing plant safety, and (4) the initial development of methods for including uncertainties in a new integrated structures-systems design model. Under the new regulatory framework, options for the use of ''design basis accidents'' were evaluated. It is expected that design basis

Designing Data Visualizations Representing Informational Relationships

CERN Document Server

Steele, Julie

2011-01-01

Data visualization is an efficient and effective medium for communicating large amounts of information, but the design process can often seem like an unexplainable creative endeavor. This concise book aims to demystify the design process by showing you how to use a linear decision-making process to encode your information visually. Delve into different kinds of visualization, including infographics and visual art, and explore the influences at work in each one. Then learn how to apply these concepts to your design process. Learn data visualization classifications, including explanatory, expl

Nuclear energy research initiative, an overview of the cooperative program for the risk-informed assessment of regulatory and design requirements for future nuclear power plants

International Nuclear Information System (INIS)

Ritterbusch, Stanley E.

2000-01-01

, along with the data collection and evaluation methods, that will be needed to evaluate the safety and reliability of future nuclear power plant designs. At the end of the Smart-NPP, DPCIT, and Risk-Informed NPP programs it is expected that methods will have been sufficiently developed and demonstrated to define a more extensive program that will address large-scale development and implementation - leading to tyhe required 35% to 40% reduction in nuclear plant cost for the U. S. de-regulated market and a much shorter construction schedule. The new design and regulatory process is envisioned to use risk-based information to the extent practical and to use ''defense-in-depth'' only when necessary to address uncertainties in PSA models and quipment performance. In the following sections, The Smart-NPP and DPCIT programs are briefly summarized and the Risk-Informed NPP program is described in more detail. (author)

Information rich display design

International Nuclear Information System (INIS)

Welch, Robin; Braseth, Alf Ove; Veland, Oeystein

2004-01-01

This paper presents the concept Information Rich Displays. The purpose of Information Rich Displays (IRDs) is to condensate prevailing information in process displays in such a way that each display format (picture) contains more relevant information for the user. Compared to traditional process control displays, this new concept allows the operator to attain key information at a glance and at the same time allows for improved monitoring of larger portions of the process. This again allows for reduced navigation between both process and trend displays and ease the cognitive demand on the operator. This concept has been created while working on designing display prototypes for the offshore petroleum production facilities of tomorrow. Offshore installations basically consist of wells, separation trains (where oil, gas and water are separated from each other), an oil tax measurement system (where oil quality is measured and the pressure increased to allow for export), gas compression (compression of gas for export) and utility systems (water treatment, chemical systems etc.). This means that an offshore control room operator has to deal with a complex process that comprises several functionally different systems. The need for a new approach to offshore display format design is in particular based on shortcomings in today's designs related to the keyhole effect, where the display format only reveals a fraction of the whole process. Furthermore, the upcoming introduction of larger off- and on-shore operation centres will increase the size and complexity of the operators' work domain. In the light of the increased demands on the operator, the proposed IRDs aim to counter the negative effects this may have on the workload. In this work we have attempted to classify the wide range of different roles an operator can have in different situations. The information content and amount being presented to the operator in a display should be viewed in context of the roles the

Basic disturbances of information processing in psychosis prediction.

Science.gov (United States)

Bodatsch, Mitja; Klosterkötter, Joachim; Müller, Ralf; Ruhrmann, Stephan

2013-01-01

The basic symptoms (BS) approach provides a valid instrument in predicting psychosis onset and represents moreover a significant heuristic framework for research. The term "basic symptoms" denotes subtle changes of cognition and perception in the earliest and prodromal stages of psychosis development. BS are thought to correspond to disturbances of neural information processing. Following the heuristic implications of the BS approach, the present paper aims at exploring disturbances of information processing, revealed by functional magnetic resonance imaging (fMRI) and electro-encephalographic as characteristics of the at-risk state of psychosis. Furthermore, since high-risk studies employing ultra-high-risk criteria revealed non-conversion rates commonly exceeding 50%, thus warranting approaches that increase specificity, the potential contribution of neural information processing disturbances to psychosis prediction is reviewed. In summary, the at-risk state seems to be associated with information processing disturbances. Moreover, fMRI investigations suggested that disturbances of language processing domains might be a characteristic of the prodromal state. Neurophysiological studies revealed that disturbances of sensory processing may assist psychosis prediction in allowing for a quantification of risk in terms of magnitude and time. The latter finding represents a significant advancement since an estimation of the time to event has not yet been achieved by clinical approaches. Some evidence suggests a close relationship between self-experienced BS and neural information processing. With regard to future research, the relationship between neural information processing disturbances and different clinical risk concepts warrants further investigations. Thereby, a possible time sequence in the prodromal phase might be of particular interest.

Design Information from the PSA for Digital Safety-Critical Systems

International Nuclear Information System (INIS)

Kang, Hyun Gook; Jang, Seung Cheol

2005-01-01

Many safety-critical applications such as nuclear field application usually adopt a similar design strategy for digital safety-critical systems. Their differences from the normal design for the non-safety-critical applications could be summarized as: multiple-redundancy, highly reliable components, strengthened monitoring mechanism, verified software, and automated test procedure. These items are focusing on maintaining the capability to perform the given safety function when it is requested. For the past several decades, probabilistic safety assessment (PSA) techniques are used in the nuclear industry to assess the relative effects of contributing events on plant risk and system reliability. They provide a unifying means of assessing physical faults, recovery processes, contributing effects, human actions, and other events that have a high degree of uncertainty. The applications of PSA provide not only the analysis results of already installed system but also the useful information for the system under design. The information could be derived from the PSA experience of the various safety-critical systems. Thanks to the design flexibility, the digital system is one of the most suitable candidates for risk-informed design (RID). In this article, we will describe the feedbacks for system design and try to develop a procedure for RID. Even though the procedure is not sophisticated enough now, it could be the start point of the further investigation for developing more complete and practical methodology

Improvement of Organizational Performance and Instructional Design: An Analogy Based on General Principles of Natural Information Processing Systems

Science.gov (United States)

Darabi, Aubteen; Kalyuga, Slava

2012-01-01

The process of improving organizational performance through designing systemic interventions has remarkable similarities to designing instruction for improving learners' performance. Both processes deal with subjects (learners and organizations correspondingly) with certain capabilities that are exposed to novel information designed for producing…

Application of risk-informed design methods to select the PSACS ultimate heat sink

International Nuclear Information System (INIS)

Elliott, Michael A.; Apostolakis, George E.

2009-01-01

In the early phases of advanced system design, information is scarce. The technologies, components and processes to be used have not been specified adequately or are not well understood and uncertainties are very large. Yet, it is during these early phases that design teams and other stakeholders are required to make critical decisions to guide the development of the system. To aid in this decision making, a formal process is proposed based on the Analytic-Deliberative Decision-Making Process (ADP) that allows stakeholders to synthesize rationally their knowledge and experience and facilitate learning and sharing of best practices. The ADP identifies and prioritizes attributes relevant to a decision problem and supports the formulation of metrics to measure the performance of different design options. This paper reports on an application of the ADP to the selection of an ultimate heat sink for the Flexible Conversion Ratio (FCR) reactor's Passive Secondary Auxiliary Cooling System (PSACS). Two ultimate heat sink options are identified and evaluated, air and water.

Information security risk assessment, aggregation, and mitigation

NARCIS (Netherlands)

Lenstra, A.K.; Voss, T.; Wang, H.; Pieprzyk, J.; Varadharajan, V.

2004-01-01

As part of their compliance process with the Basel 2 operational risk management requirements, banks must define how they deal with information security risk management. In this paper we describe work in progress on a new quantitative model to assess and aggregate information security risks that is

Information Design for “Weak Signal” detection and processing in Economic Intelligence: A case study on Health resources

Directory of Open Access Journals (Sweden)

Sahbi Sidhom

2011-12-01

Full Text Available The topics of this research cover all phases of “Information Design” applied to detect and profit from weak signals in economic intelligence (EI or business intelligence (BI. The field of the information design (ID applies to the process of translating complex, unorganized or unstructured data into valuable and meaningful information. ID practice requires an interdisciplinary approach, which combines skills in graphic design (writing, analysis processing and editing, human performances technology and human factors. Applied in the context of information system, it allows end-users to easily detect implicit topics known as “weak signals” (WS. In our approach to implement the ID, the processes cover the development of a knowledge management (KM process in the context of EI. A case study concerning information monitoring health resources is presented using ID processes to outline weak signals. Both French and American bibliographic databases were applied to make the connection to multilingual concepts in the health watch process.

Present activity in ASME Section XI regarding risk-informed maintenance

International Nuclear Information System (INIS)

Hedden, Owen; Chockie, Alan

2005-01-01

Since 1996 Section XI of the ASME Boiler and Pressure Vessel Code has actively incorporated risk-informed concepts. The risk-informed process provides a framework for allocating inspection resources in a cost-effective manner and helps focus inspections where most critical for plant safety. Based on the success of the risk-informed ISI piping applications at US and non-US plants, Section XI has refined existing Code Cases and expanded the use of the risk-informed process to a variety of high-risk components and systems. The risk informed approach started in the area of inspection and is now being expanded to other plant maintenance activities. This article summarizes the Section XI actions and the continued development of the risk-informed process to improve nuclear plant maintenance. (author)

Conceptual models of information processing

Science.gov (United States)

Stewart, L. J.

1983-01-01

The conceptual information processing issues are examined. Human information processing is defined as an active cognitive process that is analogous to a system. It is the flow and transformation of information within a human. The human is viewed as an active information seeker who is constantly receiving, processing, and acting upon the surrounding environmental stimuli. Human information processing models are conceptual representations of cognitive behaviors. Models of information processing are useful in representing the different theoretical positions and in attempting to define the limits and capabilities of human memory. It is concluded that an understanding of conceptual human information processing models and their applications to systems design leads to a better human factors approach.

A Holistic Approach for Risk Management During Design

Science.gov (United States)

Meshkat, Leila

2006-01-01

In this paper, an approach for the identification, assessment, mitigation and continuous management of risks during the process of designing a space mission is presented. This approach has been developed by observing the risk patterns that occur at the Project Design Center of the Jet Propulsion Laboratory (TeamX) which develops conceptual, concurrent design of Space Missions. TeamX develops an end-to-end conceptual design of a Space Mission in a matter of one or two weeks. As the risk chair in TeamX, the author has had the opportunity to observe the risk patterns that occur during design over the course of many design sessions. This paper introduces an abstraction and generalization of those patterns. Risk is defined as anything that can go wrong, along with its approximate likelihood and consequence. The indicators, and causes, and effects of these risks are cross cutting across the multiple levels of people and processes involved in the design, and the actual design product itself.

Risk Assessment Generated by Usage of ICT and Information Security Measures

Directory of Open Access Journals (Sweden)

Ilie TAMAS

2006-01-01

Full Text Available Information societies involve the usage of information technology and communications (ITC on a large scale. The dependence on ITC is an unquestionable problem in the present, because we assist to a generality of computers usage in all economic and social life activities. That is why organization information systems became accessible at the global level and there are permanently open for a quick exchange of information between different categories of users located by different geographical nods. The ITC usage involves the existing of some risks that should be known, evaluation and based on these, we must have information systems security measure. We consider that the risk is an indicator very important that must be permanently assess in the usage process of the information system based on ITC. Risk management suppose a permanently evaluation of these problems and also restrain by some practical actions who goes to the decrease of its effects. From the expose point of view, in this paper work it is presented the results of research based on specialty literature and current cases from practical activities, regarding the risks of ITC usage and their diminishing measure. There are distinguished the main factors (threat, vulnerability and impact who affect the information risk and on the other way, diminishing measure of the action to these factors for optimum working of an economic and social organism who use ITC. We consider that through proposed measures we assume safety in design process, implement and usage of the informational systems based on ITC.

A Tutorial on Probablilistic Risk Assessement and its Role in Risk-Informed Decision Making

Science.gov (United States)

Dezfuli, Homayoon

2010-01-01

This slide presentation reviews risk assessment and its role in risk-informed decision making. It includes information on probabilistic risk assessment, typical risk management process, origins of risk matrix, performance measures, performance objectives and Bayes theorem.

Progress toward risk informed regulation

International Nuclear Information System (INIS)

Rogers, K.C.

1997-01-01

For the last several years, the NRC, with encouragement from the industry, has been moving in the direction of risk informed regulation. This is consistent with the regulatory principle of efficiency, formally adopted by the Nuclear Regulatory Commission in 1991, which requires that regulatory activities be consistent with the degree of risk reduction they achieve. Probabilistic risk analysis has become the tool of choice for selecting the best of several alternatives. Closely related to risk informed regulation is the development of performance based rules. Such rules focus on the end result to be achieved. They do not specify the process, but instead establish the goals to be reached and how the achievement of those goals is to be judged. The inspection and enforcement activity is based on whether or not the goals have been met. The author goes on to offer comments on the history of the development of this process and its probable development in the future. He also addresses some issues which must be resolved or at least acknowledged. The success of risk informed regulation ultimately depends on having sufficiently reliable data to allow quantification of regulatory alternatives in terms of relative risk. Perhaps the area of human reliability and organizational performance has the greatest potential for improvement in reactor safety. The ability to model human performance is significantly less developed that the ability to model mechanical or electrical systems. The move toward risk informed, performance based regulation provides an unusual, perhaps unique, opportunity to establish a more rational, more effective basis for regulation

Information management in process planning

NARCIS (Netherlands)

Lutters, Diederick; Wijnker, T.C.; Kals, H.J.J.

1999-01-01

A recently proposed reference model indicates the use of structured information as the basis for the control of design and manufacturing processes. The model is used as a basis to describe the integration of design and process planning. A differentiation is made between macro- and micro process

Information needs for risk assessment

Energy Technology Data Exchange (ETDEWEB)

DeRosa, C.T.; Choudhury, H.; Schoeny, R.S.

1990-12-31

Risk assessment can be thought of as a conceptual approach to bridge the gap between the available data and the ultimate goal of characterizing the risk or hazard associated with a particular environmental problem. To lend consistency to and to promote quality in the process, the US Environmental Protection Agency (EPA) published Guidelines for Risk Assessment of Carcinogenicity, Developmental Toxicity, Germ Cell Mutagenicity and Exposure Assessment, and Risk Assessment of Chemical Mixtures. The guidelines provide a framework for organizing the information, evaluating data, and for carrying out the risk assessment in a scientifically plausible manner. In the absence of sufficient scientific information or when abundant data are available, the guidelines provide alternative methodologies that can be employed in the risk assessment. 4 refs., 3 figs., 2 tabs.

A Life-Cycle Risk-Informed Systems Structured Nuclear Code

International Nuclear Information System (INIS)

Hill, Ralph S. III

2002-01-01

Current American Society of Mechanical Engineers (ASME) nuclear codes and standards rely primarily on deterministic and mechanistic approaches to design. The design code is a separate volume from the code for inservice inspections and both are separate from the standards for operations and maintenance. The ASME code for inservice inspections and code for nuclear plant operations and maintenance have adopted risk-informed methodologies for inservice inspection, preventive maintenance, and repair and replacement decisions. The American Institute of Steel Construction and the American Concrete Institute have incorporated risk-informed probabilistic methodologies into their design codes. It is proposed that the ASME nuclear code should undergo a planned evolution that integrates the various nuclear codes and standards and adopts a risk-informed approach across a facility life-cycle - encompassing design, construction, operation, maintenance and closure. (author)

Development of a risk informed fire protection program

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, J.; McDevitt, B.; Sawyer, O.; Volk, M.A.; Drennan, J.; Sweely, C.

2015-07-01

Over the past decade, one of the largest challenges for the Nuclear Power Plant (NPP) Operator in the United States has been the implementation of risk-informed, performance-based (RI-PB) fire protection strategies into their fire protection program. Regardless of whether a utility decides to fully transition their licensing basis from deterministic to risk based, or if they simply complete a fire probabilistic risk assessment (FPRA) in order to augment their current program, it is clear that risk-informed, performance based fire protection strategies and the associated challenges are the growing trend in the United States and are here to stay. The experience of the nuclear industry in the United States with the implementation of RI-PB fire protection strategies can provide a great deal of insight for plants and utilities that follow, either by choice or necessity, a similar path. The similarities in the design of the United States and Spanish nuclear plants make these insights even more significant contributions to the strategy and planning for the Spanish fleet. The experience in United States will provide guidance to avoid similar missteps and better plan for the challenges of the transition process. As the Spanish fleet develops risk-informed and deterministic strategies to improve fire safety, an understanding of the challenges and lessons learned from the United States experience will save time and money. (Author)

Process-aware information systems : bridging people and software through process technology

NARCIS (Netherlands)

Dumas, M.; Aalst, van der W.M.P.; Hofstede, ter A.H.M.

2005-01-01

A unifying foundation to design and implement process-aware information systems This publication takes on the formidable task of establishing a unifying foundation and set of common underlying principles to effectively model, design, and implement process-aware information systems. Authored by

Risk-based design of process plants with regard to domino effects and land use planning

Energy Technology Data Exchange (ETDEWEB)

Khakzad, Nima, E-mail: nkhakzad@gmail.com [Safety and Security Science Group (S3G), Faculty of Technology, Policy and Management, TU Delft, Delft (Netherlands); Reniers, Genserik [Safety and Security Science Group (S3G), Faculty of Technology, Policy and Management, TU Delft, Delft (Netherlands); Antwerp Research Group on Safety and Security (ARGoSS), Faculty of Applied Economics, Universiteit Antwerpen, Antwerp (Belgium); Research Group CEDON, Campus Brussels, KULeuven, Brussels (Belgium)

2015-12-15

Highlights: • A Bayesian network methodology has been developed to estimate the total probability of major accidents in chemical plants. • Total probability of accidents includes the probability of individual accidents and potential domino effects. • The methodology has been extended to calculate on-site and off-site risks. • The results of the risk analysis have been used in a multi-criteria decision analysis technique to risk-based design of chemical plants. - Abstract: Land use planning (LUP) as an effective and crucial safety measure has widely been employed by safety experts and decision makers to mitigate off-site risks posed by major accidents. Accordingly, the concept of LUP in chemical plants has traditionally been considered from two perspectives: (i) land developments around existing chemical plants considering potential off-site risks posed by major accidents and (ii) development of existing chemical plants considering nearby land developments and the level of additional off-site risks the land developments would be exposed to. However, the attempts made to design chemical plants with regard to LUP requirements have been few, most of which have neglected the role of domino effects in risk analysis of major accidents. To overcome the limitations of previous work, first, we developed a Bayesian network methodology to calculate both on-site and off-site risks of major accidents while taking domino effects into account. Second, we combined the results of risk analysis with Analytic Hierarchical Process to design an optimal layout for which the levels of on-site and off-site risks would be minimum.

Implementing an Antibiotic Stewardship Information System to Improve Hospital Infection Control: A Co-Design Process.

Science.gov (United States)

Maia, Mélanie R; Simões, Alexandra; Lapão, Luís V

2018-01-01

HAITooL information system design and implementation was based on Design Science Research Methodology, ensuring full participation, in close collaboration, of researchers and a multidisciplinary team of healthcare professionals. HAITooL enables effective monitoring of antibiotic resistance, antibiotic use and provides an antibiotic prescription decision-supporting system by clinicians, strengthening the patient safety procedures. The design, development and implementation process reveals benefits in organizational and behavior change with significant success. Leadership commitment multidisciplinary team and mainly informaticians engagement was crucial to the implementation process. Participants' motivation and the final product delivery and evolution depends on that.

Risk-based design of process plants with regard to domino effects and land use planning.

Science.gov (United States)

Khakzad, Nima; Reniers, Genserik

2015-12-15

Land use planning (LUP) as an effective and crucial safety measure has widely been employed by safety experts and decision makers to mitigate off-site risks posed by major accidents. Accordingly, the concept of LUP in chemical plants has traditionally been considered from two perspectives: (i) land developments around existing chemical plants considering potential off-site risks posed by major accidents and (ii) development of existing chemical plants considering nearby land developments and the level of additional off-site risks the land developments would be exposed to. However, the attempts made to design chemical plants with regard to LUP requirements have been few, most of which have neglected the role of domino effects in risk analysis of major accidents. To overcome the limitations of previous work, first, we developed a Bayesian network methodology to calculate both on-site and off-site risks of major accidents while taking domino effects into account. Second, we combined the results of risk analysis with Analytic Hierarchical Process to design an optimal layout for which the levels of on-site and off-site risks would be minimum. Copyright © 2015 Elsevier B.V. All rights reserved.

The Research on Safety Management Information System of Railway Passenger Based on Risk Management Theory

Science.gov (United States)

Zhu, Wenmin; Jia, Yuanhua

2018-01-01

Based on the risk management theory and the PDCA cycle model, requirements of the railway passenger transport safety production is analyzed, and the establishment of the security risk assessment team is proposed to manage risk by FTA with Delphi from both qualitative and quantitative aspects. The safety production committee is also established to accomplish performance appraisal, which is for further ensuring the correctness of risk management results, optimizing the safety management business processes and improving risk management capabilities. The basic framework and risk information database of risk management information system of railway passenger transport safety are designed by Ajax, Web Services and SQL technologies. The system realizes functions about risk management, performance appraisal and data management, and provides an efficient and convenient information management platform for railway passenger safety manager.

Guidelines for designing messages in risk communication

International Nuclear Information System (INIS)

Takashita, Hirofumi; Horikoshi, Hidehiko

2004-07-01

Risk Communication Study Team (hereafter called RC team) has designed messages for risk communication based on the analysis of the local residents' opinions which were expressed in several questionnaire surveys. The messages are described in a side format (Power Point format) every single content. This report provides basic guidelines for making messages that are used for risk communication, and does not include concrete messages which RC team designed. The RC team has already published the report entitled 'Information materials for risk communication' (JNC TN8450 2003-008) separately, and it gives the concrete messages. This report shows general cautions and checklists in designing messages, comments on the messages from outside risk communication experts, and opinions from local residents. (author)

Using QA classification to guide design and manage risk

International Nuclear Information System (INIS)

Lathrop, J.; DeKlever, R.; Petrie, E.H.

1993-01-01

Raytheon Services Nevada has developed a classification process based on probabilistic risk assessment, using accident/impact scenarios for each system classified. Initial classification analyses were performed for the 20 systems of Package IA of the Exploratory Studies Facility (ESF). The analyses demonstrated a solid, defensible methodological basis for classification which minimizes the use of direct engineering judgment. They provide guidance for ESF design and risk management through the identification of: The critical characteristics of each system that need to be controlled; and the parts of the information base that most need to be further developed through performance assessment or other efforts

A catalog of information systems outsourcing risks

Directory of Open Access Journals (Sweden)

Filipe Sá-Soares

2014-01-01

Full Text Available Information systems outsourcing risks are a vital component in the decision and management process associated to the provision of information systems and technology services by a provider to a customer. Although there is a rich literature on information systems outsourcing risks, the accumulated knowledge on this area is fragmented. In view of this situation, an argument is put forward on the usefulness of having a theory that integrates the various constructs related to information systems outsourcing risks. This study aims to contribute towards the synthesis of that theory, by proposing a conceptual framework for interpreting the literature and presenting a catalog of information systems outsourcing risks. The conceptual framework articulates together six key risk elements, namely dangers, negative outcomes, undesirable consequences, factors and mitigation actions. The catalog condenses and categorizes the information systems outsourcing risk elements found on the literature reviewed, both from the perspective of the outsourcing customer and from the perspective of the outsourcing provider. Proposals for subsequent work towards the generation of the theory of information systems outsourcing risk are suggested.

[How the information system can contribute to the implementation of a risk management program in a hospital?].

Science.gov (United States)

Staccini, P; Quaranta, J F; Staccini-Myx, A; Veyres, P; Jambou, P

2003-09-01

Nowadays, information system is recognised as one of the key points of the management strategy. An information system is regarded conceptualised as a mean to link 3 aspects of a firm (structure, organisation rules and staff). Its design and implementation have to meet the objectives of medical and economical evaluation, especially risk management objectives. In order to identify, analyse, reduce and prevent the occurrence of adverse events, and also to measure the efficacy and efficiency of the production of care services, the design of information systems should be based on a process analysis in order to describe and classify all the working practices within the hospital. According to various methodologies (usually top-down analysis), each process can be divided into activities. Each activity (especially each care activity) can be described according to its potential risks and expected results. For care professionals performing a task, the access to official or internal guidelines and the adverse events reporting forms has also to be defined. Putting together all the elements of such a process analysis will contribute to integrate, into daily practice, the management of risks, supported by the information system.

Efficient Information and Data Management in Synthesis and Design of Processing Netorks

DEFF Research Database (Denmark)

Quaglia, Alberto; Sin, Gürkan; Gani, Rafiqul

industrial use of EWO, therefore, methods and tools for efficient information and data management need to be developed. In this contribution, we present a systematic data architecture, which is integrated in our framework for synthesis and design of processing networks (Quaglia et al., submitted). The data...... studies. The case studies are selected from different industrial segments, such as food processing (soybean processing network), water and wastewater management (refinery wastewater treatment and reuse; municipal water treatment) and biorefinery....... a large number (typically 1000-100,000) of data (Quaglia et. al, submitted). As a result, EWO problem formulation is a time and resource intensive task. Moreover, compilation errors results in faulty problem specifications, and may compromise the quality of the obtained solution. In order to enable...

Information Use Differences in Hot and Cold Risk Processing: When Does Information About Probability Count in the Columbia Card Task?

Science.gov (United States)

Markiewicz, Łukasz; Kubińska, Elżbieta

2015-01-01

This paper aims to provide insight into information processing differences between hot and cold risk taking decision tasks within a single domain. Decision theory defines risky situations using at least three parameters: outcome one (often a gain) with its probability and outcome two (often a loss) with a complementary probability. Although a rational agent should consider all of the parameters, s/he could potentially narrow their focus to only some of them, particularly when explicit Type 2 processes do not have the resources to override implicit Type 1 processes. Here we investigate differences in risky situation parameters' influence on hot and cold decisions. Although previous studies show lower information use in hot than in cold processes, they do not provide decision weight changes and therefore do not explain whether this difference results from worse concentration on each parameter of a risky situation (probability, gain amount, and loss amount) or from ignoring some parameters. Two studies were conducted, with participants performing the Columbia Card Task (CCT) in either its Cold or Hot version. In the first study, participants also performed the Cognitive Reflection Test (CRT) to monitor their ability to override Type 1 processing cues (implicit processes) with Type 2 explicit processes. Because hypothesis testing required comparison of the relative importance of risky situation decision weights (gain, loss, probability), we developed a novel way of measuring information use in the CCT by employing a conjoint analysis methodology. Across the two studies, results indicated that in the CCT Cold condition decision makers concentrate on each information type (gain, loss, probability), but in the CCT Hot condition they concentrate mostly on a single parameter: probability of gain/loss. We also show that an individual's CRT score correlates with information use propensity in cold but not hot tasks. Thus, the affective dimension of hot tasks inhibits correct

Risk communication with pictographs: The role of numeracy and graph processing

Directory of Open Access Journals (Sweden)

Rebecca Hess

2011-04-01

Full Text Available We conducted three studies to investigate how well pictographs communicate medical screening information to persons with higher and lower numeracy skills. In Study 1, we conducted a 2 (probability level: higher vs. lower x 2 (reference information: yes vs. no x 2 (subjective numeracy: higher vs. lower between-subjects design. Persons with higher numeracy skills were influenced by probability level but not by reference information. Persons with lower numeracy tended to differentiate between a higher and a lower probability when there was no reference information. Study 2 consisted of interviews about the mental processing of pictographs. Higher numeracy was associated with counting the icons and relying on numbers depicted in the graph. Study 3 was an experiment with the same design as in Study 1, but, rather than using reference information, we varied the sequence of task type (counting first vs. non-counting first to explore the role of the focus on numerical information. Persons with lower numeracy differentiated between higher and lower risk only when they were in the non-counting first condition. Task sequence did not influence the risk perceptions of persons with higher numeracy. In sum, our results suggest that pictographs may be useful for persons with higher and lower numeracy. However, these groups seem to process the graph differently. Persons with higher numeracy rely more on the numerical information depicted in the graph, whereas persons with lower numeracy seem to be confused when they are guided towards these numbers.

Impediments for the application of risk-informed decision making in nuclear safety

International Nuclear Information System (INIS)

Hahn, L.

2001-01-01

A broad application of risk-informed decision making in the regulation of safety of nuclear power plants is hindered by the lack of quantitative risk and safety standards as well as of precise instruments to demonstrate an appropriate safety. An additional severe problem is associated with the difficulty to harmonize deterministic design requirements and probabilistic safety assessment. The problem is strengthened by the vulnerability of PSA for subjective influences and the potential of misuse. Beside this scepticism the nuclear community is encouraged to intensify the efforts to improve the quality standards for probabilistic safety assessments and their quality assurance. A prerequisite for reliable risk-informed decision making processes is also a well-defined and transparent relationship between deterministic and probabilistic safety approaches. (author)

A catalog of information systems outsourcing risks

OpenAIRE

Soares, Filipe de Sá; Soares, Delfina de Sá; Arnaud, José

2014-01-01

Information systems outsourcing risks are a vital component in the decision and management process associated to the provision of information systems and technology services by a provider to a customer. Although there is a rich literature on information systems outsourcing risks, the accumulated knowledge on this area is fragmented. In view of this situation, an argument is put forward on the usefulness of having a theory that integrates the various constructs related to information systems o...

Informing the public about the risks from ionizing radiation

Energy Technology Data Exchange (ETDEWEB)

Slovic, P; Fischhoff, B; Lichtenstein, S [Perceptronics, Eugene, OR (USA)

1981-10-01

Designers of programs for informing the public about radiation hazards need to consider the difficulties inherent in communicating highly technical information about risk. To be effective, information campaigns must be buttressed by empirical research aimed at determining what people know, what they want to know, and how best to convey that information. Drawing upon studies of risk perception, some of the problems that any information program must confront are described.

Biological Risks to Public Health: Lessons from an International Conference to Inform the Development of National Risk Communication Strategies.

Science.gov (United States)

Dickmann, Petra; Bhatiasevi, Aphaluck; Chaib, Fadela; Baggio, Ombretta; Banluta, Christina; Hollenweger, Lilian; Maaroufi, Abderrahmane

Biological risk management in public health focuses on the impact of outbreaks on health, the economy, and other systems and on ensuring biosafety and biosecurity. To address this broad range of risks, the International Health Regulations (IHR, 2005) request that all member states build defined core capacities, risk communication being one of them. While there is existing guidance on the communication process and on what health authorities need to consider to design risk communication strategies that meet the requirements on a governance level, little has been done on implementation because of a number of factors, including lack of resources (human, financial, and others) and systems to support effective and consistent capacity for risk communication. The international conference on "Risk communication strategies before, during and after public health emergencies" provided a platform to present current strategies, facilitate learning from recent outbreaks of infectious diseases, and discuss recommendations to inform risk communication strategy development. The discussion concluded with 4 key areas for improvement in risk communication: consider communication as a multidimensional process in risk communication, broaden the biomedical paradigm by integrating social science intelligence into epidemiologic risk assessments, strengthen multisectoral collaboration including with local organizations, and spearhead changes in organizations for better risk communication governance. National strategies should design risk communication to be proactive, participatory, and multisectoral, facilitating the connection between sectors and strengthening collaboration.

Infochemistry Information Processing at the Nanoscale

CERN Document Server

Szacilowski, Konrad

2012-01-01

Infochemistry: Information Processing at the Nanoscale, defines a new field of science, and describes the processes, systems and devices at the interface between chemistry and information sciences. The book is devoted to the application of molecular species and nanostructures to advanced information processing. It includes the design and synthesis of suitable materials and nanostructures, their characterization, and finally applications of molecular species and nanostructures for information storage and processing purposes. Divided into twelve chapters; the first three chapters serve as an int

Risk-informed, performance-based safety-security interface

International Nuclear Information System (INIS)

Mrowca, B.; Eltawila, F.

2012-01-01

Safety-security interface is a term that is used as part of the commercial nuclear power security framework to promote coordination of the many potentially adverse interactions between plant security and plant safety. Its object is to prevent the compromise of either. It is also used to describe the concept of building security into a plant's design similar to the long standing practices used for safety therefore reducing the complexity of the operational security while maintaining or enhancing overall security. With this in mind, the concept of safety-security interface, when fully implemented, can influence a plant's design, operation and maintenance. It brings the approach use for plant security to one that is similar to that used for safety. Also, as with safety, the application of risk-informed techniques to fully implement and integrate safety and security is important. Just as designers and operators have applied these techniques to enhance and focus safety, these same techniques can be applied to security to not only enhance and focus the security but also to aid in the implementation of effective techniques to address the safety-security interfaces. Implementing this safety-security concept early within the design process can prevent or reduce security vulnerabilities through low cost solutions that often become difficult and expensive to retrofit later in the design and/or post construction period. These security considerations address many of the same issues as safety in ensuring that the response of equipment and plant personnel are adequate. That is, both safety and security are focused on reaching safe shutdown and preventing radiological release. However, the initiation of challenges and the progression of actions in response these challenges and even the definitions of safe shutdown can be considerably different. This paper explores the techniques and limitations that are employed to fully implement a risk-informed, safety-security interface

Effects of integrated designs of alarm and process information on diagnosis performance in digital nuclear power plants.

Science.gov (United States)

Wu, Xiaojun; She, Manrong; Li, Zhizhong; Song, Fei; Sang, Wei

2017-12-01

In the main control rooms of nuclear power plants (NPPs), operators frequently switch between alarm displays and system-information displays to incorporate information from different screens. In this study, we investigated two integrated designs of alarm and process information - integrating alarm information into process displays (denoted as Alarm2Process integration) and integrating process information into alarm displays (denoted as Process2Alarm integration). To analyse the effects of the two integration approaches and time pressure on the diagnosis performance, a laboratory experiment was conducted with ninety-six students. The results show that compared with the non-integrated case, Process2Alarm integration yields better diagnosis performance in terms of diagnosis accuracy, time required to generate correct hypothesis and completion time. In contrast, the Alarm2Process integration leads to higher levels of workload, with no improvement in diagnosis performance. The diagnosis performance of Process2Alarm integration was consistently better than that of Alarm2Process integration, regardless of the levels of time pressure. Practitioner Summary: To facilitate operator's synthesis of NPP information when performing diagnosis tasks, we proposed to integrate process information into alarm displays. The laboratory validation shows that the integration approach significantly improves the diagnosis performance for both low and high time-pressure levels.

Annual Research Review: An expanded account of information-processing mechanisms in risk for child and adolescent anxiety and depression.

Science.gov (United States)

Lau, Jennifer Y F; Waters, Allison M

2017-04-01

Anxiety and depression occurring during childhood and adolescence are common and costly. While early-emerging anxiety and depression can arise through a complex interplay of 'distal' factors such as genetic and environmental influences, temperamental characteristics and brain circuitry, the more proximal mechanisms that transfer risks on symptoms are poorly delineated. Information-processing biases, which differentiate youth with and without anxiety and/or depression, could act as proximal mechanisms that mediate more distal risks on symptoms. This article reviews the literature on information-processing biases, their associations with anxiety and depression symptoms in youth and with other distal risk factors, to provide direction for further research. Based on strategic searches of the literature, we consider how youth with and without anxiety and/or depression vary in how they deploy attention to social-affective stimuli, discriminate between threat and safety cues, retain memories of negative events and appraise ambiguous information. We discuss how these information-processing biases are similarly or differentially expressed on anxiety and depression and whether these biases are linked to genetic and environmental factors, temperamental characteristics and patterns of brain circuitry functioning implicated in anxiety and depression. Biases in attention and appraisal characterise both youth anxiety and depression but with some differences in how these are expressed for each symptom type. Difficulties in threat-safety cue discrimination characterise anxiety and are understudied in depression, while biases in the retrieval of negative and overgeneral memories have been observed in depression but are understudied in anxiety. Information-processing biases have been studied in relation to some distal factors but not systematically, so relationships remain inconclusive. Biases in attention, threat-safety cue discrimination, memory and appraisal may characterise

Designing an integrated model based on the indicators Quality and Earned Value for risk management in Information Technology Projects

OpenAIRE

TATLARI, Mohammad Reza; KAZEMİPOOR, Hamed

2015-01-01

There are two effective factors on Information Technology (IT) projects risk including quality and earned value so that by controlling these two factors and their increased level in IT projects, the corresponding risk can be decreased. Therefore in present study, an integrated model was designed based on quality and earned value indicators for risk management in IT projects on a new and efficient approach. The proposed algorithm included the steps such as preparing a list of several indicator...

A Systematic Approach of Employing Quality by Design Principles: Risk Assessment and Design of Experiments to Demonstrate Process Understanding and Identify the Critical Process Parameters for Coating of the Ethylcellulose Pseudolatex Dispersion Using Non-Conventional Fluid Bed Process.

Science.gov (United States)

Kothari, Bhaveshkumar H; Fahmy, Raafat; Claycamp, H Gregg; Moore, Christine M V; Chatterjee, Sharmista; Hoag, Stephen W

2017-05-01

The goal of this study was to utilize risk assessment techniques and statistical design of experiments (DoE) to gain process understanding and to identify critical process parameters for the manufacture of controlled release multiparticulate beads using a novel disk-jet fluid bed technology. The material attributes and process parameters were systematically assessed using the Ishikawa fish bone diagram and failure mode and effect analysis (FMEA) risk assessment methods. The high risk attributes identified by the FMEA analysis were further explored using resolution V fractional factorial design. To gain an understanding of the processing parameters, a resolution V fractional factorial study was conducted. Using knowledge gained from the resolution V study, a resolution IV fractional factorial study was conducted; the purpose of this IV study was to identify the critical process parameters (CPP) that impact the critical quality attributes and understand the influence of these parameters on film formation. For both studies, the microclimate, atomization pressure, inlet air volume, product temperature (during spraying and curing), curing time, and percent solids in the coating solutions were studied. The responses evaluated were percent agglomeration, percent fines, percent yield, bead aspect ratio, median particle size diameter (d50), assay, and drug release rate. Pyrobuttons® were used to record real-time temperature and humidity changes in the fluid bed. The risk assessment methods and process analytical tools helped to understand the novel disk-jet technology and to systematically develop models of the coating process parameters like process efficiency and the extent of curing during the coating process.

Systematic Review: Concept and Tool Development with Application in the Integrated Risk Information System (IRIS) Assessment Process

Science.gov (United States)

Systematic Review: Concept and tool development with application to the National Toxicology Program (NTP) and the Integrated Risk Information System (IRIS) Assessment Processes. There is growing interest within the environmental health community to incorporate systematic review m...

Information use differences in hot and cold risk processing: When does information about probability count in the Columbia Card Task?

Directory of Open Access Journals (Sweden)

Lukasz eMarkiewicz

2015-11-01

Full Text Available Objective: This paper aims to provide insight into information processing differences between hot and cold risk taking decision tasks within a single domain. Decision theory defines risky situations using at least three parameters: outcome one (often a gain with its probability and outcome two (often a loss with a complementary probability. Although a rational agent should consider all of the parameters, decision maker could potentially narrow focus to only some of them, particularly when explicit Type 2 processes do not have the resources to override implicit Type 1 processes. Here we investigate differences in risky situation parameter(s influence on hot and cold decisions. Although previous studies show lower information use in hot as compared to cold processes, they do not provide decision weight changes and therefore do not explain whether this difference results from worse concentration on each parameter of a risky situation (probability, gain amount and loss amount or from ignoring some parameters. Methods: Two studies were conducted, with participants performing the Columbia Card Task (CCT in either its Cold or Hot version. In the first study, participants also performed the Cognitive Reflection Test (CRT to monitor their ability to override Type 1 processing cues (implicit processes with Type 2 explicit processes. Because hypothesis testing required comparison of the relative importance of risky situation decision weights (gain, loss, probability, we developed a novel way of measuring information use in the CCT by employing a conjoint analysis methodology. Results: Across the two studies, results indicated that in the CCT Cold condition decision makers concentrate on each information type (gain, loss, probability, but in the CCT Hot condition they concentrate mostly on a single parameter: probability of gain/loss. We also show that an individual’s CRT score correlates with information use propensity in cold but not hot tasks. Thus

Information Use Differences in Hot and Cold Risk Processing: When Does Information About Probability Count in the Columbia Card Task?

Science.gov (United States)

Markiewicz, Łukasz; Kubińska, Elżbieta

2015-01-01

Objective: This paper aims to provide insight into information processing differences between hot and cold risk taking decision tasks within a single domain. Decision theory defines risky situations using at least three parameters: outcome one (often a gain) with its probability and outcome two (often a loss) with a complementary probability. Although a rational agent should consider all of the parameters, s/he could potentially narrow their focus to only some of them, particularly when explicit Type 2 processes do not have the resources to override implicit Type 1 processes. Here we investigate differences in risky situation parameters' influence on hot and cold decisions. Although previous studies show lower information use in hot than in cold processes, they do not provide decision weight changes and therefore do not explain whether this difference results from worse concentration on each parameter of a risky situation (probability, gain amount, and loss amount) or from ignoring some parameters. Methods: Two studies were conducted, with participants performing the Columbia Card Task (CCT) in either its Cold or Hot version. In the first study, participants also performed the Cognitive Reflection Test (CRT) to monitor their ability to override Type 1 processing cues (implicit processes) with Type 2 explicit processes. Because hypothesis testing required comparison of the relative importance of risky situation decision weights (gain, loss, probability), we developed a novel way of measuring information use in the CCT by employing a conjoint analysis methodology. Results: Across the two studies, results indicated that in the CCT Cold condition decision makers concentrate on each information type (gain, loss, probability), but in the CCT Hot condition they concentrate mostly on a single parameter: probability of gain/loss. We also show that an individual's CRT score correlates with information use propensity in cold but not hot tasks. Thus, the affective dimension of

Risk-Informed Decision Making: Application to Technology Development Alternative Selection

Science.gov (United States)

Dezfuli, Homayoon; Maggio, Gaspare; Everett, Christopher

2010-01-01

NASA NPR 8000.4A, Agency Risk Management Procedural Requirements, defines risk management in terms of two complementary processes: Risk-informed Decision Making (RIDM) and Continuous Risk Management (CRM). The RIDM process is used to inform decision making by emphasizing proper use of risk analysis to make decisions that impact all mission execution domains (e.g., safety, technical, cost, and schedule) for program/projects and mission support organizations. The RIDM process supports the selection of an alternative prior to program commitment. The CRM process is used to manage risk associated with the implementation of the selected alternative. The two processes work together to foster proactive risk management at NASA. The Office of Safety and Mission Assurance at NASA Headquarters has developed a technical handbook to provide guidance for implementing the RIDM process in the context of NASA risk management and systems engineering. This paper summarizes the key concepts and procedures of the RIDM process as presented in the handbook, and also illustrates how the RIDM process can be applied to the selection of technology investments as NASA's new technology development programs are initiated.

'What-if' design: a synthesis method in the design process

NARCIS (Netherlands)

Lutters, Diederick; Vaneker, Thomas H.J.; van Houten, Frederikus J.A.M.

2004-01-01

In integrating functions, information and control in the design and engineering cycle, the information content acts as a facilitator, whereas the processes involved actually effectuate the results of the development cycle. As combining processes in an effective and efficient manner becomes

76 FR 44301 - Information Collection; Homeowner Risk Reduction Behaviors Concerning Wildfire Risks and Climate...

Science.gov (United States)

2011-07-25

... the design of more effective risk mitigation projects and improved communication strategies among.... This information will assist the Forest Service in their risk communication efforts with ``at risk... of California State University of Long Beach, Long Beach, California. The results will be made...

Risk assessment activities at NIOSH: Information resources and needs

Energy Technology Data Exchange (ETDEWEB)

Stayner, L.T.; Meinhardt, T.; Hardin, B. [National Institute for Occupational Safety and Health, Cincinnati, OH (United States)

1990-12-31

Under the Occupational Safety and Health, and Mine Safety and Health Acts, the National Institute for Occupational Safety and Health (NIOSH) is charged with development of recommended occupational safety and health standards, and with conducting research to support the development of these standards. Thus, NIOSH has been actively involved in the analysis of risk associated with occupational exposures, and in the development of research information that is critical for the risk assessment process. NIOSH research programs and other information resources relevant to the risk assessment process are described in this paper. Future needs for information resources are also discussed.

Designing an oil spill information management system

International Nuclear Information System (INIS)

Douligeris, C.; Collins, J.; Iakovou, E.; Sun, P.; Riggs, K.R.

1995-01-01

This paper presents the architectural design of OSIMS, an Oil Spill Information Management System, which is an integrated information management tool that consists of an object-relational database management system, an adaptive decision support system, an advanced visualization system (AVS) and a geographic information system (GIS). OSIMS will handle large and diverse databases of environmental, ecological, geographical, engineering, and regulatory information and will be used for risk analysis and contingency planning

Designing an oil spill information management system

Energy Technology Data Exchange (ETDEWEB)

Douligeris, C.; Collins, J.; Iakovou, E.; Sun, P.; Riggs, K.R. [Univ. of Miami, Coral Gables, FL (United States)

1995-12-31

This paper presents the architectural design of OSIMS, an Oil Spill Information Management System, which is an integrated information management tool that consists of an object-relational database management system, an adaptive decision support system, an advanced visualization system (AVS) and a geographic information system (GIS). OSIMS will handle large and diverse databases of environmental, ecological, geographical, engineering, and regulatory information and will be used for risk analysis and contingency planning.

Developments on ASME Code Cases to Risk-Informed Repair/Replacement Activities in Support of Risk-Informed Regulation Initiatives

International Nuclear Information System (INIS)

Balkey, Kenneth R.; Holston, William C.

2002-01-01

ASME Code Case N-658, 'Risk-Informed Safety Classification for Use in Risk-Informed Repair/Replacement Activities' and Code Case N-660, 'Alternative Repair/Replacement Requirements For Items Classified In Accordance With Risk-Informed Processes' are being completed to expand the breadth of risk-informed requirements for pressure-retaining items. This initiative, which is built from prior ASME Section XI risk-informed inservice inspection developments over the past decade, has been undertaken in conjunction with U.S. risk-informed regulation efforts. The U.S. Nuclear Regulatory Commission (NRC) is working with the industry on risk informing Title 10 Code of Federal Regulations Part 50 (10CFR50). The Nuclear Regulatory Commission's basic proposal is to allow modification of some of the special treatment requirements of 10CFR50. Their effort is proceeding via an Advanced Notice of Public Rulemaking, March 3, 2000, and an announcement of Availability of Draft Rule Wording, November 29, 2001, to add 10 CFR 50.69, 'Risk-Informed Treatment of Structures, Systems and Components'. A parallel task by the Nuclear Energy Institute (NEI) to develop a guideline on how to implement the results of the rulemaking is also well underway via NEI 00-04 (Draft Revision B), 'Option 2 Implementation Guideline', May 2001. This paper summarizes the content and status of approval of the proposed ASME Code Cases, including how they relate to the above NRC and NEI efforts. Some initial results from trial application of the Code Cases will also be cited. (authors)

Risk-Informed Decisions Optimization in Inspection and Maintenance

International Nuclear Information System (INIS)

Robertas Alzbutas

2002-01-01

The Risk-Informed Approach (RIA) used to support decisions related to inspection and maintenance program is considered. The use of risk-informed methods can help focus the adequate in-service inspections and control on the more important locations of complex dynamic systems. The focus is set on the highest risk measured as conditional core damage frequency, which is produced by the frequencies of degradation and final failure at different locations combined with the conditional failure consequence probability. The probabilities of different degradation states per year and consequences are estimated quantitatively. The investigation of inspection and maintenance process is presented as the combination of deterministic and probabilistic analysis based on general risk-informed model, which includes the inspection and maintenance program features. Such RIA allows an optimization of inspection program while maintaining probabilistic and fundamental deterministic safety requirements. The failure statistics analysis is used as well as the evaluation of reliability of inspections. The assumptions regarding the effectiveness of the inspection methods are based on a classification of the accessibility of the welds during the inspection and on the different techniques used for inspection. The probability of defect detection is assumed to depend on the parameters either through logarithmic or logit transformation. As example the modeling of the pipe systems inspection process is analyzed. The means to reduce a number of inspection sites and the cumulative radiation exposure to the NPP inspection personnel with a reduction of overall risk is presented together with used and developed software. The developed software can perform and administrate all the risk evaluations and ensure the possibilities to compare different options and perform sensitivity analysis. The approaches to define an acceptable level of risk are discussed. These approaches with appropriate software in

Information Flows in Networked Engineering Design Projects

DEFF Research Database (Denmark)

Parraguez, Pedro; Maier, Anja

Complex engineering design projects need to manage simultaneously multiple information flows across design activities associated with different areas of the design process. Previous research on this area has mostly focused on either analysing the “required information flows” through activity...... networks at the project level or in studying the social networks that deliver the “actual information flow”. In this paper we propose and empirically test a model and method that integrates both social and activity networks into one compact representation, allowing to compare actual and required...... information flows between design spaces, and to assess the influence that these misalignments could have on the performance of engineering design projects....

Design of a RESTful web information system for drug prescription and administration.

Science.gov (United States)

Bianchi, Lorenzo; Paganelli, Federica; Pettenati, Maria Chiara; Turchi, Stefano; Ciofi, Lucia; Iadanza, Ernesto; Giuli, Dino

2014-05-01

Drug prescription and administration processes strongly impact on the occurrence of risks in medical settings for they can be sources of adverse drug events (ADEs). A properly engineered use of information and communication technologies has proven to be a promising approach to reduce these risks. In this study, we propose PHARMA, a web information system which supports healthcare staff in the secure cooperative execution of drug prescription, transcription and registration tasks. PHARMA allows the easy sharing and management of documents containing drug-related information (i.e., drug prescriptions, medical reports, screening), which is often inconsistent and scattered across different information systems and heterogeneous organization domains (e.g., departments, other hospital facilities). PHARMA enables users to access such information in a consistent and secure way, through the adoption of REST and web-oriented design paradigms and protocols. We describe the implementation of the PHARMA prototype, and we discuss the results of the usability evaluation that we carried out with the staff of a hospital in Florence, Italy.

Nuclear Energy Research Initiative. Risk Informed Assessment of Regulatory and Design Requirements for Future Nuclear Power Plants. Annual Report

International Nuclear Information System (INIS)

Ritterbusch, S.E.

2000-01-01

The overall goal of this research project is to support innovation in new nuclear power plant designs. This project is examining the implications, for future reactors and future safety regulation, of utilizing a new risk-informed regulatory system as a replacement for the current system. This innovation will be made possible through development of a scientific, highly risk-informed approach for the design and regulation of nuclear power plants. This approach will include the development and.lor confirmation of corresponding regulatory requirements and industry standards. The major impediment to long term competitiveness of new nuclear plants in the U.S. is the capital cost component--which may need to be reduced on the order of 35% to 40% for Advanced Light Water Reactors (ALWRs) such as System 80+ and Advanced Boiling Water Reactor (ABWR). The required cost reduction for an ALWR such as AP600 or AP1000 would be expected to be less. Such reductions in capital cost will require a fundamental reevaluation of the industry standards and regulatory bases under which nuclear plants are designed and licensed. Fortunately, there is now an increasing awareness that many of the existing regulatory requirements and industry standards are not significantly contributing to safety and reliability and, therefore, are unnecessarily adding to nuclear plant costs. Not only does this degrade the economic competitiveness of nuclear energy, it results in unnecessary costs to the American electricity consumer. While addressing these concerns, this research project will be coordinated with current efforts of industry and NRC to develop risk-informed, performance-based regulations that affect the operation of the existing nuclear plants; however, this project will go farther by focusing on the design of new plants

Nuclear Energy Research Initiative. Risk Informed Assessment of Regulatory and Design Requirements for Future Nuclear Power Plants. Annual Report

Energy Technology Data Exchange (ETDEWEB)

Ritterbusch, S.E.

2000-08-01

The overall goal of this research project is to support innovation in new nuclear power plant designs. This project is examining the implications, for future reactors and future safety regulation, of utilizing a new risk-informed regulatory system as a replacement for the current system. This innovation will be made possible through development of a scientific, highly risk-informed approach for the design and regulation of nuclear power plants. This approach will include the development and.lor confirmation of corresponding regulatory requirements and industry standards. The major impediment to long term competitiveness of new nuclear plants in the U.S. is the capital cost component--which may need to be reduced on the order of 35% to 40% for Advanced Light Water Reactors (ALWRs) such as System 80+ and Advanced Boiling Water Reactor (ABWR). The required cost reduction for an ALWR such as AP600 or AP1000 would be expected to be less. Such reductions in capital cost will require a fundamental reevaluation of the industry standards and regulatory bases under which nuclear plants are designed and licensed. Fortunately, there is now an increasing awareness that many of the existing regulatory requirements and industry standards are not significantly contributing to safety and reliability and, therefore, are unnecessarily adding to nuclear plant costs. Not only does this degrade the economic competitiveness of nuclear energy, it results in unnecessary costs to the American electricity consumer. While addressing these concerns, this research project will be coordinated with current efforts of industry and NRC to develop risk-informed, performance-based regulations that affect the operation of the existing nuclear plants; however, this project will go farther by focusing on the design of new plants.

Evaluating and predicting overall process risk using event logs

NARCIS (Netherlands)

Pika, A.; Van Der Aalst, W.M.P.; Wynn, M.T.; Fidge, C.J.; Ter Hofstede, A.H.M.

2016-01-01

Companies standardise and automate their business processes in order to improve process efficiency and minimise operational risks. However, it is difficult to eliminate all process risks during the process design stage due to the fact that processes often run in complex and changeable environments

Risk informed regulation of nuclear facilities: Overview of the current status

International Nuclear Information System (INIS)

2005-02-01

This report provides guidance on the use of risk information by regulatory bodies as part of an integrated decision making process. This addresses the way in which risk information is being used in decisions about safety issues at nuclear plants, sometimes referred to as risk informed decision making, and how risk information is being used by regulatory bodies as an input into the activities that they carry out, sometimes referred to as risk informed regulation

A historical perspective of risk-informed regulation

Energy Technology Data Exchange (ETDEWEB)

Campbell, P.L.

1996-12-01

In Federal studies, the process of using risk information is described as having two general components: (1) risk assessment - the application of credible scientific principles and statistical methods to develop estimates of the likely effects of natural phenomena and human factors and the characterization of these estimates in a form appropriate for the intended audience (e.g., agency decisionmakers, public); and (2) risk management - the process of weighing policy alternatives and selecting the most appropriate regulatory action, integrating the results of risk assessment with engineering data with social, economic, and political concerns to reach a decision. This paper discusses largely the second component.

A historical perspective of risk-informed regulation

International Nuclear Information System (INIS)

Campbell, P.L.

1996-01-01

In Federal studies, the process of using risk information is described as having two general components: (1) risk assessment - the application of credible scientific principles and statistical methods to develop estimates of the likely effects of natural phenomena and human factors and the characterization of these estimates in a form appropriate for the intended audience (e.g., agency decisionmakers, public); and (2) risk management - the process of weighing policy alternatives and selecting the most appropriate regulatory action, integrating the results of risk assessment with engineering data with social, economic, and political concerns to reach a decision. This paper discusses largely the second component

Geo-communication and information design

DEFF Research Database (Denmark)

Brodersen, Lars

2009-01-01

of processes, procedures, factors, relations etc., all forming parts of a theory on geo-communication and information design. How do we decide whether to transmit content A or content B to another person? We make a decision. Making decisions does not normally give rise to difficulties, although a great deal......This article is an abstract of the book 'Geo-communication and information design'. The work involved in the book was inspired by the author's sense of wonder that there were apparently no existing theories, models etc. capable of identifying and choosing the content of information in systematic...... of debate might occur during the decision-making process. But if the question is extended to include a demand for systematics and consciousness (control) in the procedure adopted, the whole issue becomes more complex. How do we decide to transmit content A or content B to another person on a systematic...

Designing discovery learning environments: process analysis and implications for designing an information system

NARCIS (Netherlands)

Pieters, Julius Marie; Limbach, R.; de Jong, Anthonius J.M.

2004-01-01

A systematic analysis of the design process of authors of (simulation based) discovery learning environments was carried out. The analysis aimed at identifying the design activities of authors and categorising knowledge gaps that they experience. First, five existing studies were systematically

From Process to Product: Your Risk Process at Work

Science.gov (United States)

Kundrot, Craig E.; Fogarty, Jenifer; Charles, John; Buquo, Lynn; Sibonga, Jean; Alexander, David; Horn, Wayne G.; Edwards, J. Michelle

2010-01-01

The Space Life Sciences Directorate (SLSD) and Human Research Program (HRP) at the NASA/Johnson Space Center work together to address and manage the human health and performance risks associated with human space flight. This includes all human system requirements before, during, and after space flight, providing for research, and managing the risk of adverse long-term health outcomes for the crew. We previously described the framework and processes developed for identifying and managing these human system risks. The focus of this panel is to demonstrate how the implementation of the framework and associated processes has provided guidance in the management and communication of human system risks. The risks of early onset osteoporosis, CO2 exposure, and intracranial hypertension in particular have all benefitted from the processes developed for human system risk management. Moreover, we are continuing to develop capabilities, particularly in the area of information architecture, which will also be described. We are working to create a system whereby all risks and associated actions can be tracked and related to one another electronically. Such a system will enhance the management and communication capabilities for the human system risks, thereby increasing the benefit to researchers and flight surgeons.

Audio visual information materials for risk communication

International Nuclear Information System (INIS)

Gunji, Ikuko; Tabata, Rimiko; Ohuchi, Naomi

2005-07-01

Japan Nuclear Cycle Development Institute (JNC), Tokai Works set up the Risk Communication Study Team in January, 2001 to promote mutual understanding between the local residents and JNC. The Team has studied risk communication from various viewpoints and developed new methods of public relations which are useful for the local residents' risk perception toward nuclear issues. We aim to develop more effective risk communication which promotes a better mutual understanding of the local residents, by providing the risk information of the nuclear fuel facilities such a Reprocessing Plant and other research and development facilities. We explain the development process of audio visual information materials which describe our actual activities and devices for the risk management in nuclear fuel facilities, and our discussion through the effectiveness measurement. (author)

Risk informed approach to the in-service inspection activities

International Nuclear Information System (INIS)

Korosec, D.; Vojvodic Tuma, J.

2004-01-01

In the present paper, the aspects of Risk Informed In-Service Inspection (RI-ISI) are discussed. Slovenian Nuclear Safety Administration (SNSA) and its authorized organization for the ISI activities, Institute of Metals and Technologies (IMT), are actually permanently involved in the ISI processes of the nuclear power plant (NPP) Krsko. Based on the previous experience on the ISI activities, evaluation of the results and review of the existing practice in nuclear world, the activities are started to asses the piping of systems in the light of probability of failure. This is so called Risk Informed approach. By the design established criteria, standards and practice gives good fundaments for the improvements implementation. Improvements can be done on the way that the more broad knowledge about safety important components of the systems shall bee added to the basic practice. It is necessary to identify conditions of the safety important components, such as realistic stress and fatigue conditions, material properties changes due aging processes, the temperature cycling effects, existing flaws characterization in the light of the previous detection and equipment technique used, assessment of the measurement accuracy on the results etc. In addition to this deterministic approach, the principles of risk evaluation methods should be used. NPP Krsko has, as practically majority of NPP's, probabilistic risk assessment (PRA) studies for all safety important systems and components. The methods and results from these studies can be efficiently used to upgrade classical deterministic results, based on which the in-service program as a whole is usually done. In addition to the above mentioned, risk assessment and evaluation of the piping shall be done, which is not covered by the existing PRA analysis. To do this it is necessary to made risk evaluation of the piping segments, based on previous structural element probability assessment. Probabilistic risk assessment is important

A framework of risk-informed seismic safety evaluation of nuclear power plants in Japan

International Nuclear Information System (INIS)

Kondo, S.; Sakagami, M.; Hirano, M.; Shiba, M.

2001-01-01

A framework of risk-informed seismic design and safety evaluation of nuclear power plants is under consideration in Japan so as to utilize the progress in the seismic probabilistic safety assessment methodology. Issues resolved to introduce this framework are discussed after the concept, evaluation process and characteristics of the framework are described. (author)

An Information Architect's View of Earth Observations for Disaster Risk Management

Science.gov (United States)

Moe, K.; Evans, J. D.; Cappelaere, P. G.; Frye, S. W.; Mandl, D.; Dobbs, K. E.

2014-12-01

Satellite observations play a significant role in supporting disaster response and risk management, however data complexity is a barrier to broader use especially by the public. In December 2013 the Committee on Earth Observation Satellites Working Group on Information Systems and Services documented a high-level reference model for the use of Earth observation satellites and associated products to support disaster risk management within the Global Earth Observation System of Systems context. The enterprise architecture identified the important role of user access to all key functions supporting situational awareness and decision-making. This paper focuses on the need to develop actionable information products from these Earth observations to simplify the discovery, access and use of tailored products. To this end, our team has developed an Open GeoSocial API proof-of-concept for GEOSS. We envision public access to mobile apps available on smart phones using common browsers where users can set up a profile and specify a region of interest for monitoring events such as floods and landslides. Information about susceptibility and weather forecasts about flood risks can be accessed. Users can generate geo-located information and photos of local events, and these can be shared on social media. The information architecture can address usability challenges to transform sensor data into actionable information, based on the terminology of the emergency management community responsible for informing the public. This paper describes the approach to collecting relevant material from the disasters and risk management community to address the end user needs for information. The resulting information architecture addresses the structural design of the shared information in the disasters and risk management enterprise. Key challenges are organizing and labeling information to support both online user communities and machine-to-machine processing for automated product generation.

Information delivery manuals to integrate building product information into design

DEFF Research Database (Denmark)

Berard, Ole Bengt; Karlshøj, Jan

2011-01-01

Despite continuing BIM progress, professionals in the AEC industry often lack the information they need to perform their work. Although this problem could be alleviated by information systems similar to those in other industries, companies struggle to model processes and information needs...... them in information systems. BIM implies that objects are bearers of information and logic. The present study has three main aims: (1) to explore IDMs capability to capture all four perspectives, (2) to determine whether an IDM’s collaborative methodology is valid for developing standardized processes......, and (3) to ascertain whether IDM’s business rules can support the development of information and logic-bearing BIM objects. The research is based on a case study of re-engineering the bidding process for a design-build project to integrate building product manufacturers, subcontractors...

RISK ANALYSIS IN INFORMATION TECHNOLOGY AND COMMUNICATION OUTSOURCING

Directory of Open Access Journals (Sweden)

Edmir Parada Vasques Prado

2011-12-01

Full Text Available This research aims at evaluating the risk analysis process in Information Technology and Communication (ICT outsourcing conducted by organizations of the private sector. The research is characterized by being a descriptive, quantitative and transversal type study, which was used the survey method. Data were collected through questionnaire, the sample is not random and we used a convenience sampling process. The research made contributions to understanding the risk analysis process in ICT services outsourcing, and identified statistically significant relationships between risk analysis, organization's size and its industry, and between risk analysis and diversity of outsourced services

Risk-informing special treatment requirements for reactors

International Nuclear Information System (INIS)

McKenna, E.M.; Reed, T.A.

2001-01-01

The U.S. Nuclear Regulatory Commission (NRC) is proposing to make regulatory changes to the scope of structures, systems, and components (SSCs) requiring special treatment. ''Special treatment requirements'' refers to those specific examples of regulations that are applied in order to provide a high degree of assurance that SSC will be capable of performing their intended functions when needed. The current scope of SSCs covered by the special treatment requirements governing commercial nuclear reactors is deterministically based and stems primarily from the evaluation of selected design basis events, as described in updated final safety analysis reports (UFSARs). This regulatory framework provides reasonable assurance of no undue risk to the health and safety of the public. However, recent advances in technology, coupled with operating reactor experience, have suggested that an alternative approach that would use a risk-informed process for evaluating SSC safety significance, would, in turn, result in a more focused determination of which SSCs should receive special treatment requirements. (author)

PREFACE: Quantum information processing

Science.gov (United States)

Briggs, Andrew; Ferry, David; Stoneham, Marshall

2006-05-01

Microelectronics and the classical information technologies transformed the physics of semiconductors. Photonics has given optical materials a new direction. Quantum information technologies, we believe, will have immense impact on condensed matter physics. The novel systems of quantum information processing need to be designed and made. Their behaviours must be manipulated in ways that are intrinsically quantal and generally nanoscale. Both in this special issue and in previous issues (see e.g., Spiller T P and Munro W J 2006 J. Phys.: Condens. Matter 18 V1-10) we see the emergence of new ideas that link the fundamentals of science to the pragmatism of market-led industry. We hope these papers will be followed by many others on quantum information processing in the Journal of Physics: Condensed Matter.

Communicating Risks and Benefits in Informed Consent for Research: A Qualitative Study

Science.gov (United States)

Nusbaum, Lika; Douglas, Brenda; Damus, Karla; Paasche-Orlow, Michael; Estrella-Luna, Neenah

2017-01-01

Multiple studies have documented major limitations in the informed consent process for the recruitment of clinical research participants. One challenging aspect of this process is successful communication of risks and benefits to potential research participants. This study explored the opinions and attitudes of informed consent experts about conveying risks and benefits to inform the development of a survey about the perspectives of research nurses who are responsible for obtaining informed consent for clinical trials. The major themes identified were strategies for risks and benefits communication, ensuring comprehension, and preparation for the role of the consent administrator. From the experts’ perspective, inadequate education and training of the research staff responsible for informed consent process contribute to deficiencies in the informed consent process and risks and benefits communication. Inconsistencies in experts’ opinions and critique of certain widely used communication practices require further consideration and additional research. PMID:28975139

Quantum information processing using designed defect states in

DEFF Research Database (Denmark)

Pedersen, Jesper; Flindt, Christian; Mortensen, Niels Asger

2007-01-01

We propose a new physical implementation of spin qubits for quantum information processing, namely defect states in antidot lattices de¯ned in the two-dimensional electron gas at a semiconductor heterostructure. Calculations of the band structure of the periodic antidot lattice are presented...

Risk-informed approach in US-APWR technical specifications

International Nuclear Information System (INIS)

Saji, Etsuro; Tanaka, Futoshi; Kuroiwa, Katsuya; Kawai, Katsunori

2009-01-01

The Risk-Managed Technical Specifications and the Surveillance Frequency Control Program have been adopted in the US-APWR Technical Specifications. These risk-informed approaches are unique among the technical specifications for the advanced light water reactor designs adopted by planned nuclear power stations in the United States. (author)

Informing the Uninformed: Optimizing the Consent Message Using a Fractional Factorial Design

Science.gov (United States)

Tait, Alan R.; Voepel-Lewis, Terri; Nair, Vijayan N.; Narisetty, Naveen N.; Fagerlin, Angela

2013-01-01

Objective Research information should be presented in a manner that promotes understanding. However, many parents and research subjects have difficulty understanding and making informed decisions. This study was designed to examine the effect of different communication strategies on parental understanding of research information. Participants 640 parents of children scheduled for elective surgery Design Observational study using a fractional factorial design Setting Large tertiary care children's hospital Interventions Parents were randomized to receive information about a hypothetical pain trial presented in one of 16 consent documents containing different combinations of 5 selected communication strategies (i.e., length, readability, processability [formatting], graphical display, and supplemental verbal disclosure). Main outcome measures Parents were interviewed to determine their understanding of the study elements (e.g., protocol, alternatives etc.) and their gist (main point) and verbatim (actual) understanding of the risks and benefits. Results Main effects for understanding were found for processability, readability, message length, use of graphics, and verbal discussion. Consent documents with high processability, 8th grade reading level, and graphics resulted in significantly greater gist and verbatim understanding compared with forms without these attributes (mean difference, 95% CI = 0.57, 0.26–0.88, correct responses out of 7 and 0.54, 0.20–0.88 correct responses out of 4 for gist and verbatim, respectively). Conclusions Results identified several communication strategy combinations that improved parents' understanding of research information. Adoption of these active strategies by investigators, clinicians, IRBs, and study sponsors represents a simple, practical, and inexpensive means to optimize the consent message and enhance parental, participant, and patient understanding. PMID:23700028

Misfits in Organization Design: Information Processing as a Compensatory Mechanism

Directory of Open Access Journals (Sweden)

Ben Nanfeng Luo

2013-04-01

Full Text Available We propose a compensatory misfits theory which holds that an “over-fitting” organization structure can compensate for an “under-fitting” structure, thereby reducing the total misfit. In organizations, over-fit occurs when structural features misfit the core contingencies because the structural level is too high to fit the contingencies. An under-fit occurs when structural features misfit the contingencies because the structural level is too low. When an under-fit is compensated by an over-fit, the combination can produce performance outcomes that approximate those from fit. The reason inheres in information processing being a higher level factor that cuts across different contingencies and structural features that are mis-fitted to each other, so that compensation is possible. We identify the specific conditions that must be fulfilled for compensation to occur, and we discuss implications for organization design theory and practice.

A method for risk-informed safety significance categorization using the analytic hierarchy process and bayesian belief networks

International Nuclear Information System (INIS)

Ha, Jun Su; Seong, Poong Hyun

2004-01-01

A risk-informed safety significance categorization (RISSC) is to categorize structures, systems, or components (SSCs) of a nuclear power plant (NPP) into two or more groups, according to their safety significance using both probabilistic and deterministic insights. In the conventional methods for the RISSC, the SSCs are quantitatively categorized according to their importance measures for the initial categorization. The final decisions (categorizations) of SSCs, however, are qualitatively made by an expert panel through discussions and adjustments of opinions by using the probabilistic insights compiled in the initial categorization process and combining the probabilistic insights with the deterministic insights. Therefore, owing to the qualitative and linear decision-making process, the conventional methods have the demerits as follows: (1) they are very costly in terms of time and labor, (2) it is not easy to reach the final decision, when the opinions of the experts are in conflict and (3) they have an overlapping process due to the linear paradigm (the categorization is performed twice - first, by the engineers who propose the method, and second, by the expert panel). In this work, a method for RISSC using the analytic hierarchy process (AHP) and bayesian belief networks (BBN) is proposed to overcome the demerits of the conventional methods and to effectively arrive at a final decision (or categorization). By using the AHP and BBN, the expert panel takes part in the early stage of the categorization (that is, the quantification process) and the safety significance based on both probabilistic and deterministic insights is quantified. According to that safety significance, SSCs are quantitatively categorized into three categories such as high safety significant category (Hi), potentially safety significant category (Po), or low safety significant category (Lo). The proposed method was applied to the components such as CC-V073, CV-V530, and SI-V644 in Ulchin Unit

OPTIMIZING THE DESIGN OF THE SYSTEMS OF INFORMATION PROTECTION IN AUTOMATED INFORMATIONAL SYSTEMS OF INDUSTRIAL ENTERPRISES

Directory of Open Access Journals (Sweden)

I. E. L'vovich

2014-01-01

Full Text Available Summary. Now to increase of indicators of efficiency and operability of difficult systems apply an automation equipment. The increasing role of information which became universal goods for relationship between various structures is noted. The question of its protection becomes the most actual. Special value is allocated for optimum design at creation of systems of the protection, allowing with the greatest probability to choose the best decisions on a set of alternatives. Now it becomes actual for the majority of the industrial enterprises as correctly designed and introduced system of protection will be pledge of successful functioning and competitiveness of all organization. Stages of works on creation of an information security system of the industrial enterprise are presented. The attention is focused on one of the most important approaches to realization of optimum design – multialternative optimization. In article the structure of creation of system of protection from the point of view of various models is considered, each of which gives an idea of features of design of system as a whole. The special attention is paid to a problem of creation of an information security system as it has the most difficult structure. Tasks for processes of automation of each of design stages of system of information security of the industrial enterprises are designated. Idea of each of stages of works is given at design of system of protection that allows to understand in the best way internal structure of creation of system of protection. Therefore, it is given the chance of evident submission of necessary requirements to creation of a reliable complex of information security of the industrial enterprise. Thereby it is given the chance of leveling of risks at early design stages of systems of protection, the organization and definition of necessary types of hardware-software complexes for future system.

Designing informal learning spaces using student perspectives

Directory of Open Access Journals (Sweden)

Matthew David Riddle

2012-06-01

Full Text Available This article describes the design of informal learning spaces at an Australian university that support students in the generation of knowledge. Recent learning space design projects at La Trobe have been informed by a number of pre-existing projects, including a small research project on student use of technologies, a national project on learning space design, and a significant curriculum renewal process at the university. It demonstrates the ways in which evidence based on student perspectives and principles developed through applied research in teaching and learning can inform real world learning space design projects in a higher education context.

Research on Design Information Management System for Leather Goods

Science.gov (United States)

Lu, Lei; Peng, Wen-li

The idea of setting up a design information management system of leather goods was put forward to solve the problems existed in current information management of leather goods. Working principles of the design information management system for leather goods were analyzed in detail. Firstly, the acquiring approach of design information of leather goods was introduced. Secondly, the processing methods of design information were introduced. Thirdly, the management of design information in database was studied. Finally, the application of the system was discussed by taking the shoes products as an example.

Disclosing Risk Information: Assessing the Benefits

International Nuclear Information System (INIS)

Beierle, Thomas C.

2003-01-01

This paper describes a framework for examining the benefits of risk information disclosure and illustrates the framework through brief case studies of three information disclosure programs in the United States. I describe a general framework for analyzing the benefits of information disclosure and illustrate the framework by analyzing three disclosure programs in the United States: risk management planning (RMP), which provides detailed information on chemical accident risks and prevention; materials accounting, which provides information on how chemicals travel through processes at industrial facilities; and the Sector Facility Indexing Project (SFIP), which consolidates enforcement, compliance, and other data into a package of environmental performance indicators. This paper has outlined the types of benefits information disclosure programs ought to seek to achieve. Normative right-to-know benefits have been limited in some program because of intentionally circumscribed information sharing and apparent public disinterest. Substantive benefits have been more apparent, with many firms, agencies, NGOs, and others being able to point to the value of newly revealed information in better understanding environmental problems and the means to correct them. Instrumental benefits have been mixed, and firms appear to be responding to many motivations - not just public pressure - in deciding whether to improve environmental performance

Risk-informed ranking of engineering projects

International Nuclear Information System (INIS)

Jyrkama, M.; Pandey, M.

2011-01-01

Refurbishment planning requires prudent investment decisions with respect to the various systems and components at the station. These decisions are influenced by many factors, including engineering, safety, regulatory, economic, and political constraints. From an engineering perspective, the concept of cost-benefit analysis is a common way to allocate capital among various projects. Naturally, the 'best' or optimal project should have the lowest cost and the highest benefit. In the context of risk-informed decision making (RIDM), a process that has been widely embraced by the global nuclear community, the costs and benefits must further be 'weighted' by probabilities to estimate the underlying risk associated with the various planning alternatives. The main purpose of this study is to illustrate how risk and reliability information can be integrated into the refurbishment planning process to facilitate more objective and transparent investment decisions. The methodology is based on the concept of generation risk assessment (GRA) which provides a systematic approach for balancing investment costs with the reduction in overall financial risk. In addition to reliability predictions, the model provides estimates for the level of risk reduction associated with each system/project and also the break-even point for investment. This information is vital for project ranking, and helps to address the key question of whether capital investment should be made in the most risk critical systems, or in systems that reduce the overall risk the most. The application of the proposed methodology requires only basic information regarding the current reliability of each engineering system, which should be readily available from plant records and routine condition assessments. Because the methodology can be readily implemented in a Microsoft Excel spreadsheet, all plausible (e.g., bounding) planning scenarios, with or without investment, can also be generated quickly and easily, while

Mitigating construction safety risks using prevention through design.

Science.gov (United States)

Gangolells, Marta; Casals, Miquel; Forcada, Núria; Roca, Xavier; Fuertes, Alba

2010-04-01

Research and practice have demonstrated that decisions made prior to work at construction sites can influence construction worker safety. However, it has also been argued that most architects and design engineers possess neither the knowledge of construction safety nor the knowledge of construction processes necessary to effectively perform Construction Hazards Prevention through Design (CHPtD). This paper introduces a quantitative methodology that supports designers by providing a way to evaluate the safety-related performance of residential construction designs using a risk analysis-based approach. The methodology compares the overall safety risk level of various construction designs and ranks the significance of the various safety risks of each of these designs. The methodology also compares the absolute importance of a particular safety risk in various construction designs. Because the methodology identifies the relevance of each safety risk at a particular site prior to the construction stage, significant risks are highlighted in advance. Thus, a range of measures for mitigating safety risks can then be implemented during on-site construction. The methodology is specially worthwhile for designers, who can compare construction techniques and systems during the design phase and determine the corresponding level of safety risk without their creative talents being restricted. By using this methodology, construction companies can improve their on-site safety performance. Copyright 2010 Elsevier Ltd. All rights reserved.

From PISC to risk informed inspection

International Nuclear Information System (INIS)

Crutzen, S.; Lemaitre, P.; Fabbri, L.

1998-01-01

In this paper the correlation between inspection effectiveness, inspection qualification and risk informed inspection will be treated in view of harmonisation of inspection of nuclear plant components. Through the different phases of the PISC programme the necessity has been demonstrated to show the effectiveness of the inspection through a formal process of qualification in order to ensure that a certain level of effectiveness has been reached. Inspection qualification is indeed the way to quantify the capability level of inspection techniques used. The targets to be met by the inspection is information which should be obtained from risk based analyses. (author)

Informing patients: the influence of numeracy, framing, and format of side effect information on risk perceptions.

Science.gov (United States)

Peters, Ellen; Hart, P Sol; Fraenkel, Liana

2011-01-01

Given the importance of effective patient communication, findings about influences on risk perception in nonmedical domains need replication in medical domains. To examine whether numeracy influences risk perceptions when different information frames and number formats are used to present medication risks. The authors manipulated the frame and number format of risk information in a 3 (frame: positive, negative, combined) × 2 (number format: frequency, percentage) design. Participants from an Internet sample (N = 298), randomly assigned to condition, responded to a single, hypothetical scenario. The main effects and interactions of numeracy, framing, and number format on risk perception were measured. Participants given the positive frame perceived the medication as less risky than those given the negative frame. Mean risk perceptions for the combined frame fell between the positive and negative frames. Numeracy did not moderate these framing effects. Risk perceptions also varied by number format and numeracy, with less-numerate participants given risk information in a percentage format perceiving the medication as less risky than when given risk information in a frequency format; highly numerate participants perceived similar risks in both formats. The generalizability of the findings is limited due to the use of non-patients, presented a hypothetical scenario. Given the design, one cannot know whether observed differences would translate into clinically significant differences in patient behaviors. Frequency formats appear to increase risk perceptions over percentage formats for less-numerate respondents. Health communicators need to be aware that different formats generate different risk perceptions among patients varying in numeracy.

Real-time risk monitoring in business processes : a sensor-based approach

NARCIS (Netherlands)

Conforti, R.; La Rosa, M.; Fortino, G.; Hofstede, ter A.H.M.; Recker, J.; Adams, M.

2013-01-01

This article proposes an approach for real-time monitoring of risks in executable business process models. The approach considers risks in all phases of the business process management lifecycle, from process design, where risks are defined on top of process models, through to process diagnosis,

Integrated plant information technology design support functionality

International Nuclear Information System (INIS)

Kim, Yeon Seung; Kim, Dae Jin; Barber, P. W.; Goland, D.

1996-06-01

This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author)

Integrated plant information technology design support functionality

Energy Technology Data Exchange (ETDEWEB)

Kim, Yeon Seung; Kim, Dae Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Barber, P W; Goland, D [Atomic Energy Canada Ltd., (Canada)

1996-06-01

This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author).

The influence of narrative v. statistical information on perceiving vaccination risks.

Science.gov (United States)

Betsch, Cornelia; Ulshöfer, Corina; Renkewitz, Frank; Betsch, Tilmann

2011-01-01

Health-related information found on the Internet is increasing and impacts patient decision making, e.g. regarding vaccination decisions. In addition to statistical information (e.g. incidence rates of vaccine adverse events), narrative information is also widely available such as postings on online bulletin boards. Previous research has shown that narrative information can impact treatment decisions, even when statistical information is presented concurrently. As the determinants of this effect are largely unknown, we will vary features of the narratives to identify mechanisms through which narratives impact risk judgments. An online bulletin board setting provided participants with statistical information and authentic narratives about the occurrence and nonoccurrence of adverse events. Experiment 1 followed a single factorial design with 1, 2, or 4 narratives out of 10 reporting adverse events. Experiment 2 implemented a 2 (statistical risk 20% vs. 40%) × 2 (2/10 vs. 4/10 narratives reporting adverse events) × 2 (high vs. low richness) × 2 (high vs. low emotionality) between-subjects design. Dependent variables were perceived risk of side-effects and vaccination intentions. Experiment 1 shows an inverse relation between the number of narratives reporting adverse-events and vaccination intentions, which was mediated by the perceived risk of vaccinating. Experiment 2 showed a stronger influence of the number of narratives than of the statistical risk information. High (vs. low) emotional narratives had a greater impact on the perceived risk, while richness had no effect. The number of narratives influences risk judgments can potentially override statistical information about risk.

Bruce NGS B risk assessment (BBRA) peer review process

International Nuclear Information System (INIS)

Kaasalainen, S.; Crocker, W.P.; Webb, W.A.

2001-01-01

Risk-informed decision making is considered an effective approach to managing the risk of nuclear power plant operation in a competitive market. Hence, increased reliance on the station probabilistic risk assessments (PRAs) to provide risk perspective inputs is inevitable. With increased reliance on the PRAs it is imperative that PRAs have the characteristics necessary to provide the required information. Recognizing the increased requirements on nuclear power plant PRAs the nuclear industry in the United States has expended significant effort over the past few years defining the required characteristics of a PRA for various applications. More recently several owners groups have drafted guidelines for PRA certification and several U.S. utilities have had their PRAs certified. During the year 2000 Ontario Power Generation, Nuclear (OPG,N) subjected the PRA of one of its stations to the U.S. style certification process. The PRA selected for this process was the Bruce B Risk Assessment (BBRA). BBRA was chosen for this process since it is the first OPG, N PRA to be used for risk-informed applications. However, the strengths of the BBRA identified from the certification process and the lessons learned are also largely applicable to the other OPG, N plant PRAs due to the use of similar methods and tools

A rural community's involvement in the design and usability testing of a computer-based informed consent process for the Personalized Medicine Research Project.

Science.gov (United States)

Mahnke, Andrea N; Plasek, Joseph M; Hoffman, David G; Partridge, Nathan S; Foth, Wendy S; Waudby, Carol J; Rasmussen, Luke V; McManus, Valerie D; McCarty, Catherine A

2014-01-01

Many informed consent studies demonstrate that research subjects poorly retain and understand information in written consent documents. Previous research in multimedia consent is mixed in terms of success for improving participants' understanding, satisfaction, and retention. This failure may be due to a lack of a community-centered design approach to building the interventions. The goal of this study was to gather information from the community to determine the best way to undertake the consent process. Community perceptions regarding different computer-based consenting approaches were evaluated, and a computer-based consent was developed and tested. A second goal was to evaluate whether participants make truly informed decisions to participate in research. Simulations of an informed consent process were videotaped to document the process. Focus groups were conducted to determine community attitudes towards a computer-based informed consent process. Hybrid focus groups were conducted to determine the most acceptable hardware device. Usability testing was conducted on a computer-based consent prototype using a touch-screen kiosk. Based on feedback, a computer-based consent was developed. Representative study participants were able to easily complete the consent, and all were able to correctly answer the comprehension check questions. Community involvement in developing a computer-based consent proved valuable for a population-based genetic study. These findings may translate to other types of informed consents, including those for trials involving treatment of genetic disorders. A computer-based consent may serve to better communicate consistent, clear, accurate, and complete information regarding the risks and benefits of study participation. Additional analysis is necessary to measure the level of comprehension of the check-question answers by larger numbers of participants. The next step will involve contacting participants to measure whether understanding of

A Design-Based Research Project on Information Literacy Focusing on Process, Reflections and Self-Feedback

Directory of Open Access Journals (Sweden)

Majbritt Ursula Johansen

2016-12-01

Full Text Available Many curriculums assume that the new generation of students are digital natives and information literate. However, studies show that this is not often the case. From these studies and our own experiences working with multidisciplinary students in the Health Sciences we found that students were not as information literate as required in the curriculum. Using Design Based Research as a method (following the four phases below, we developed a new information search process and a web-based tool with feedback opportunities from teachers and librarians in order to qualify the students competencies. Problem identification: Despite earlier initiatives from library and department, the students didn’t achieve higher levels of information literacy. Prototyping: Requirements and educational material were merged and tested while gathering feedback. Iterations: The prototype and feedback were evaluated and developed into a new information search process, which was tested and evaluated. Reflection and generalization: Initiative was taken to develope a web-based application visualizing the steps with the learning points: self-feedback, peer-feedback and counselor feedback. The result of the project is a new information search process model and a web-based learning environment called B!NKO 2.0. The evaluations have shown positive feedback on both the process and the web tool. The project has opened up new possibilities that go beyond the Health multidisciplinary students. A new project concerning the Humanities and Social Sciences is incipient. In this project new functionalities are also expected. B!NKO 2.0 has to a great extent shown its worth to help Health multidisciplinary students to get a deeper understanding of information literacy, and how to develop and change searches to get better results. B!NKO 2.0 has also given a positive "side effect” on the librarians work. Time spend on the "Book a Librarian” service have decreased for the librarians using

Developing a theory to guide the process of designing information retrieval systems

DEFF Research Database (Denmark)

Sonnenwald, Diane H.

1992-01-01

This research attempts to develop a descriptive design model that accounts for communication among users, designers, and developer throughout the design process. A pilot study has been completed and a preliminary model that represents a first step in understanding participants' evolving perceptio...... and expectations of the design process and its outcomes is described in this paper....

A simulation framework for mapping risks in clinical processes: the case of in-patient transfers

Science.gov (United States)

Ong, Mei-Sing; Westbrook, Johanna I; Magrabi, Farah; Coiera, Enrico; Wobcke, Wayne

2011-01-01

Objective To model how individual violations in routine clinical processes cumulatively contribute to the risk of adverse events in hospital using an agent-based simulation framework. Design An agent-based simulation was designed to model the cascade of common violations that contribute to the risk of adverse events in routine clinical processes. Clinicians and the information systems that support them were represented as a group of interacting agents using data from direct observations. The model was calibrated using data from 101 patient transfers observed in a hospital and results were validated for one of two scenarios (a misidentification scenario and an infection control scenario). Repeated simulations using the calibrated model were undertaken to create a distribution of possible process outcomes. The likelihood of end-of-chain risk is the main outcome measure, reported for each of the two scenarios. Results The simulations demonstrate end-of-chain risks of 8% and 24% for the misidentification and infection control scenarios, respectively. Over 95% of the simulations in both scenarios are unique, indicating that the in-patient transfer process diverges from prescribed work practices in a variety of ways. Conclusions The simulation allowed us to model the risk of adverse events in a clinical process, by generating the variety of possible work subject to violations, a novel prospective risk analysis method. The in-patient transfer process has a high proportion of unique trajectories, implying that risk mitigation may benefit from focusing on reducing complexity rather than augmenting the process with further rule-based protocols. PMID:21486883

Development of portal web site for fostering of risk literacy 'risk information navigator'

International Nuclear Information System (INIS)

Shobu, Nobuhiro; Mitsui, Seiichiro; Nakamura, Hirofumi

2004-01-01

Risk communication activities are important for promoting mutual understanding between local communities and Japan Nuclear Cycle Development Institutes (JNC). In addition to conventional public relation activities, the risk communication study team of JNC Tokai Works has started practical studies to promote further mutual understanding with its local communities. This paper reports the design and concept of a web site for the fostering of risk literacy, the 'Risk Information Navigator', that was developed as one of the risk communication methods, and surveys the web site from the user's perspective. (author)

High School Student Information Access and Engineering Design Performance

Science.gov (United States)

Mentzer, Nathan

2014-01-01

Developing solutions to engineering design problems requires access to information. Research has shown that appropriately accessing and using information in the design process improves solution quality. This quasi-experimental study provides two groups of high school students with a design problem in a three hour design experience. One group has…

Regulatory environment of transitioning to risk-informed regulations in U.S.A

International Nuclear Information System (INIS)

Choi, C. H.; Kim, C. H.

1999-01-01

With the publication of the PRA Policy Statement and recent regulatory guides, the U.S.NRC makes a continuous approach towards risk-informed regulations with the goal of establishing an overall framework for risk-informed decisions in all regulatory activities as well as plant specific licensing issues. Faced with the changing environment of deregulation of the electricity generation market, the licensee's effort to reduce design margins to enhance flexibility and to relieve unnecessary regulatory burdens have been focused on the control and reduction of plant operating costs. The risk-informed approach provides a structured, systematic, and defensible method that can be applied not only to rulemaking, but also to licensing, inspection, enforcement, and performance assessment, as well as provides basis for prioritization in the establishment of programs and the allocation of resources. This report describes the current regulatory environment of transitioning to risk-informed regulations with an emphasis on its background, concepts, regulatory guides, proposed options for modifying the 10CFR50, and risk-informed applications in U.S.A. Review of the risk informed applications utilizing the information provided by the PRAs and their insights in the U.S.NRC and nuclear industry will provide the insights of predicting the expected regulation changes in Korea. Also it could provide the applicable methods or guides for the implementation of the risk-informed applications in plant design and operations. (author)

Information needs and risk perception as predictors of risk information seeking

NARCIS (Netherlands)

ter Huurne, E.F.J.; Gutteling, Jan M.

2008-01-01

This paper introduces a theoretical framework that describes the importance of public's information sufficiency, risk perception, and self-efficacy as predictors of intended risk information seeking behaviour. Based on theoretical assumptions, measurement instruments for relevant concepts were

Designing informal learning spaces using student perspectives

OpenAIRE

Matthew David Riddle; Kay Souter

2012-01-01

This article describes the design of informal learning spaces at an Australian university that support students in the generation of knowledge. Recent learning space design projects at La Trobe have been informed by a number of pre-existing projects, including a small research project on student use of technologies, a national project on learning space design, and a significant curriculum renewal process at the university. It demonstrates the ways in which evidence based on student perspectiv...

PRA and Conceptual Design

Science.gov (United States)

DeMott, Diana; Fuqua, Bryan; Wilson, Paul

2013-01-01

Once a project obtains approval, decision makers have to consider a variety of alternative paths for completing the project and meeting the project objectives. How decisions are made involves a variety of elements including: cost, experience, current technology, ideologies, politics, future needs and desires, capabilities, manpower, timing, available information, and for many ventures management needs to assess the elements of risk versus reward. The use of high level Probabilistic Risk Assessment (PRA) Models during conceptual design phases provides management with additional information during the decision making process regarding the risk potential for proposed operations and design prototypes. The methodology can be used as a tool to: 1) allow trade studies to compare alternatives based on risk, 2) determine which elements (equipment, process or operational parameters) drives the risk, and 3) provide information to mitigate or eliminate risks early in the conceptual design to lower costs. Creating system models using conceptual design proposals and generic key systems based on what is known today can provide an understanding of the magnitudes of proposed systems and operational risks and facilitates trade study comparisons early in the decision making process. Identifying the "best" way to achieve the desired results is difficult, and generally occurs based on limited information. PRA provides a tool for decision makers to explore how some decisions will affect risk before the project is committed to that path, which can ultimately save time and money.

Using a logical information model-driven design process in healthcare.

Science.gov (United States)

Cheong, Yu Chye; Bird, Linda; Tun, Nwe Ni; Brooks, Colleen

2011-01-01

A hybrid standards-based approach has been adopted in Singapore to develop a Logical Information Model (LIM) for healthcare information exchange. The Singapore LIM uses a combination of international standards, including ISO13606-1 (a reference model for electronic health record communication), ISO21090 (healthcare datatypes), SNOMED CT (healthcare terminology) and HL7 v2 (healthcare messaging). This logic-based design approach also incorporates mechanisms for achieving bi-directional semantic interoperability.

Applying risk insights in US NRC reviews of integral pressurized water reactor designs

International Nuclear Information System (INIS)

Caruso, M.A.; Hilsmeier, T.; Kevern, T.A.

2012-01-01

In its Staff Requirements Memorandum (SRM) on COMGBJ-10-0004/COMGEA-10-0001, 'Use of Risk Insights to Enhance Safety Focus of Small Modular Reactor Reviews,' dated August 31, 2010 (ML102510405), the U.S. Nuclear Regulatory Commission (NRC) directed the NRC staff to more fully integrate the use of risk insights into pre-application activities and the review of small modular reactor (SMR) applications with near-term focus on integral pressurized water reactor (iPWR) designs. The Commission's objective is to align the review focus and resources with the risk-significant systems, structures, and components (SSCs) and other aspects of the design, that contribute most to safety in order to enhance the efficiency of the review process while still enabling a decision of reasonable assurance of the design's safety. The staff was directed to develop a design-specific, risk-informed review plan for each SMR to address pre-application and application review activities. The NRC staff submitted a response to the Commission which describes its approach for (1) using risk insights, consistent with current regulatory requirements, to assign SSCs to one of a limited set of graded categories, and (2) adjusting the scope and depth of current review plans--where possible--consistent with regulatory requirements and consistent with the applicable graded category. Because the staff's review constitutes an independent audit of the application, the staff may emphasize or de-emphasize particular aspects of its review guidance (i.e., Standard Review Plan), as appropriate and consistent with regulatory requirements, for the application being reviewed. The staff may propose justifications for not performing certain sections of the reviews called for by the applicable review plan. Examples of acceptable variations in the scope of a review can include reduced emphasis on SSC attributes such as reliability, availability, or functional performance when the SSC will be in the scope of a program

Organizational Information Requirements, Media Richness and Structural Design

OpenAIRE

Richard L. Daft; Robert H. Lengel

1986-01-01

This paper answers the question, "Why do organizations process information?" Uncertainty and equivocality are defined as two forces that influence information processing in organizations. Organization structure and internal systems determine both the amount and richness of information provided to managers. Models are proposed that show how organizations can be designed to meet the information needs of technology, interdepartmental relations, and the environment. One implication for managers i...

Security Risk Assessment Process for UAS in the NAS CNPC Architecture

Science.gov (United States)

Iannicca, Dennis Christopher; Young, Daniel Paul; Suresh, Thadhani; Winter, Gilbert A.

2013-01-01

This informational paper discusses the risk assessment process conducted to analyze Control and Non-Payload Communications (CNPC) architectures for integrating civil Unmanned Aircraft Systems (UAS) into the National Airspace System (NAS). The assessment employs the National Institute of Standards and Technology (NIST) Risk Management framework to identify threats, vulnerabilities, and risks to these architectures and recommends corresponding mitigating security controls. This process builds upon earlier work performed by RTCA Special Committee (SC) 203 and the Federal Aviation Administration (FAA) to roadmap the risk assessment methodology and to identify categories of information security risks that pose a significant impact to aeronautical communications systems. A description of the deviations from the typical process is described in regards to this aeronautical communications system. Due to the sensitive nature of the information, data resulting from the risk assessment pertaining to threats, vulnerabilities, and risks is beyond the scope of this paper

Advanced information processing system

Science.gov (United States)

Lala, J. H.

1984-01-01

Design and performance details of the advanced information processing system (AIPS) for fault and damage tolerant data processing on aircraft and spacecraft are presented. AIPS comprises several computers distributed throughout the vehicle and linked by a damage tolerant data bus. Most I/O functions are available to all the computers, which run in a TDMA mode. Each computer performs separate specific tasks in normal operation and assumes other tasks in degraded modes. Redundant software assures that all fault monitoring, logging and reporting are automated, together with control functions. Redundant duplex links and damage-spread limitation provide the fault tolerance. Details of an advanced design of a laboratory-scale proof-of-concept system are described, including functional operations.

Information Risk Management and Resilience

Science.gov (United States)

Dynes, Scott

Are the levels of information risk management efforts within and between firms correlated with the resilience of the firms to information disruptions? This paper examines the question by considering the results of field studies of information risk management practices at organizations and in supply chains. The organizations investigated differ greatly in the degree of coupling from a general and information risk management standpoint, as well as in the levels of internal awareness and activity regarding information risk management. The comparison of the levels of information risk management in the firms and their actual or inferred resilience indicates that a formal information risk management approach is not necessary for resilience in certain sectors.

Information Asymmetry and Credit Risk

Directory of Open Access Journals (Sweden)

Lorena TUPANGIU

2017-11-01

Full Text Available Information asymmetry defines relationships where an agent holds information while another does not hold it. Thus, to the extent that one of the parties to the financing agreement has information more or less accurate than another, the asymmetry of information appears to be a major constraint in the financing of a project. Banks, in their capacity of financial intermediary, operate the transfer of funds to agents in need of financing, to the borrowers, being necessary in this process to have more information in order to benefit of expertise in assessing borrowers. The research of information asymmetry and credit risk consists of interrogating the following aspects: information issues between the bank and borrowers; settlement of information issues; bank’s activism towards information asymmetry. In our approach we will look at the first aspect, namely the information issues between the bank and the borrowers.

Drug safety in pregnancy: utopia or achievable prospect? Risk information, risk research and advocacy in Teratology Information Services.

Science.gov (United States)

Schaefer, Christof

2011-03-01

Even though from preclinical testing to drug risk labeling, the situation with drugs in pregnancy has improved substantially since the thalidomide scandal, there is still an increasing need to provide healthcare professionals and patients with updated individualized risk information for clinical decision making. For the majority of drugs, clinical experience is still insufficient with respect to their safety in pregnancy. There is often uncertainty in how to interpret the available scientific data. Based on 20 years of experience with Teratology Information Services (TIS) cooperating in the European Network of Teratology Information Services (ENTIS) methods of risk interpretation, follow-up of exposed pregnancies through the consultation process and their evaluation is discussed. Vitamin K antagonists, isotretinoin and angiotensin (AT) II-receptor-antagonists are presented as examples of misinterpretation of drug risks and subjects of research based on observational clinical data recorded in TIS. As many TIS are poorly funded, advocacy is necessary by establishing contacts with decision makers in health politics and administration, informing them of the high return in terms of health outcomes and cost savings provided by TIS as reference institutions in clinical teratology. © 2011 The Author. Congenital Anomalies © 2011 Japanese Teratology Society.

Risk Management of Large RC Structures within Spatial Information System

DEFF Research Database (Denmark)

Qin, Jianjun; Faber, Michael Havbro

2012-01-01

Abstract: The present article addresses the development of a spatial information system (SIS), which aims to facilitate risk management of large‐scale concrete structures. The formulation of the SIS is based on ideas developed in the context of indicator‐based risk modeling for concrete structures...... subject to corrosion and geographical information system based risk modeling concerning large‐scale risk management. The term “risk management” here refers in particular to the process of condition assessment and optimization of the inspection and repair activities. The SIS facilitates the storage...... and handling of all relevant information to the risk management. The probabilistic modeling utilized in the condition assessment takes basis in a Bayesian hierarchical modeling philosophy. It facilitates the updating of risks as well as optimizing inspection plans whenever new information about the condition...

Risk-informed inservice test activities at the NRC

International Nuclear Information System (INIS)

Fischer, D.; Cheok, M.; Hsia, A.

1996-01-01

The operational readiness of certain safety-related components is vital to the safe operation of nuclear power plants. Inservice testing (IST) is one of the mechanisms used by licensees to ensure this readiness. In the past, the type and frequency of IST have been based on the collective best judgment of the NRC and industry in an ASME Code consensus process and NRC rulemaking process. Furthermore, IST requirements have not explicitly considered unique component and system designs and contribution to overall plant risk. Because of the general nature of ASME Code test requirements and non-reliance on risk estimates, current IST requirements may not adequately emphasize testing those components that are most important to safety and may overly emphasize testing of less safety significant components. Nuclear power plant licensees are currently interested in optimizing testing by applying resources in more safety significant areas and, where appropriate, reducing measures in less safety-significant areas. They are interested in maintaining system availability and reducing overall maintenance costs in ways that do not adversely affect safety. The NRC has been interested in using probabilistic, as an adjunct to deterministic, techniques to help define the scope, type and frequency of IST. The development of risk-informed IST programs has the potential to optimize the use of NRC and industry resources without adverse affect on safety

Risk-informed inservice test activities at the NRC

Energy Technology Data Exchange (ETDEWEB)

Fischer, D.; Cheok, M.; Hsia, A.

1996-12-01

The operational readiness of certain safety-related components is vital to the safe operation of nuclear power plants. Inservice testing (IST) is one of the mechanisms used by licensees to ensure this readiness. In the past, the type and frequency of IST have been based on the collective best judgment of the NRC and industry in an ASME Code consensus process and NRC rulemaking process. Furthermore, IST requirements have not explicitly considered unique component and system designs and contribution to overall plant risk. Because of the general nature of ASME Code test requirements and non-reliance on risk estimates, current IST requirements may not adequately emphasize testing those components that are most important to safety and may overly emphasize testing of less safety significant components. Nuclear power plant licensees are currently interested in optimizing testing by applying resources in more safety significant areas and, where appropriate, reducing measures in less safety-significant areas. They are interested in maintaining system availability and reducing overall maintenance costs in ways that do not adversely affect safety. The NRC has been interested in using probabilistic, as an adjunct to deterministic, techniques to help define the scope, type and frequency of IST. The development of risk-informed IST programs has the potential to optimize the use of NRC and industry resources without adverse affect on safety.

A recommendation system for predicting risks across multiple business process instances

NARCIS (Netherlands)

Conforti, R.; Leoni, de M.; La Rosa, M.; Aalst, van der W.M.P.; Hofstede, ter A.H.M.

2014-01-01

This paper proposes a recommendation system that supports process participants in taking risk-informed decisions, with the goal of reducing risks that may arise during process execution. Risk reduction involves decreasing the likelihood and severity of a process fault from occurring. Given a

A recommendation system for predicting risks across multiple business process instances

NARCIS (Netherlands)

Conforti, R.; Leoni, de M.; La Rosa, M.; Aalst, van der W.M.P.; Hofstede, ter A.H.M.

2015-01-01

This paper proposes a recommendation system that supports process participants in taking risk-informed decisions, with the goal of reducing risks that may arise during process execution. Risk reduction involves decreasing the likelihood and severity of a process fault from occurring. Given a

Knowledge and Processes in Design. DPS Final Report.

Science.gov (United States)

Pirolli, Peter

Four papers from a project concerning information-processing characterizations of the knowledge and processes involved in design are presented. The project collected and analyzed verbal protocols from instructional designers, architects, and mechanical engineers. A framework was developed for characterizing the problem spaces of design that…

Insight into the Earthquake Risk Information Seeking Behavior of the Victims: Evidence from Songyuan, China

Directory of Open Access Journals (Sweden)

Shasha Li

2017-03-01

Full Text Available Efficient risk communication is a vital way to reduce the vulnerability of individuals when facing emergency risks, especially regarding earthquakes. Efficient risk communication aims at improving the supply of risk information and fulfilling the need for risk information by individuals. Therefore, an investigation into individual-level information seeking behavior within earthquake risk contexts is very important for improved earthquake risk communication. However, at present there are very few studies that have explored the behavior of individuals seeking earthquake risk information. Under the guidance of the Risk Information Seeking and Processing model as well as relevant practical findings using the structural equation model, this study attempts to explore the main determinants of an individual’s earthquake risk information seeking behavior, and to validate the mediator effect of information need during the seeking process. A questionnaire-based survey of 918 valid respondents in Songyuan, China, who had been hit by a small earthquake swarm, was used to provide practical evidence for this study. Results indicated that information need played a noteworthy role in the earthquake risk information seeking process, and was detected both as an immediate predictor and as a mediator. Informational subjective norms drive the seeking behavior on earthquake risk information through both direct and indirect approaches. Perceived information gathering capacity, negative affective responses and risk perception have an indirect effect on earthquake risk information seeking behavior via information need. The implications for theory and practice regarding risk communication are discussed and concluded.

Advanced information processing system: The Army Fault-Tolerant Architecture detailed design overview

Science.gov (United States)

Harper, Richard E.; Babikyan, Carol A.; Butler, Bryan P.; Clasen, Robert J.; Harris, Chris H.; Lala, Jaynarayan H.; Masotto, Thomas K.; Nagle, Gail A.; Prizant, Mark J.; Treadwell, Steven

1994-01-01

The Army Avionics Research and Development Activity (AVRADA) is pursuing programs that would enable effective and efficient management of large amounts of situational data that occurs during tactical rotorcraft missions. The Computer Aided Low Altitude Night Helicopter Flight Program has identified automated Terrain Following/Terrain Avoidance, Nap of the Earth (TF/TA, NOE) operation as key enabling technology for advanced tactical rotorcraft to enhance mission survivability and mission effectiveness. The processing of critical information at low altitudes with short reaction times is life-critical and mission-critical necessitating an ultra-reliable/high throughput computing platform for dependable service for flight control, fusion of sensor data, route planning, near-field/far-field navigation, and obstacle avoidance operations. To address these needs the Army Fault Tolerant Architecture (AFTA) is being designed and developed. This computer system is based upon the Fault Tolerant Parallel Processor (FTPP) developed by Charles Stark Draper Labs (CSDL). AFTA is hard real-time, Byzantine, fault-tolerant parallel processor which is programmed in the ADA language. This document describes the results of the Detailed Design (Phase 2 and 3 of a 3-year project) of the AFTA development. This document contains detailed descriptions of the program objectives, the TF/TA NOE application requirements, architecture, hardware design, operating systems design, systems performance measurements and analytical models.

Risk assessment of urban flood disaster in Jingdezhen City based on analytic hierarchy process and geographic information system

Science.gov (United States)

Sun, D. C.; Huang, J.; Wang, H. M.; Wang, Z. Q.; Wang, W. Q.

2017-08-01

The research of urban flood risk assessment and management are of great academic and practical importance, which has become a widespread concern throughout the world. It’s significant to understand the spatial-temporal distribution of the flood risk before making the risk response measures. In this study, the urban region of Jingdezhen City is selected as the study area. The assessment indicators are selected from four aspects: disaster-causing factors, disaster-pregnant environment, disaster-bearing body and the prevention and mitigation ability, by consideration of the formation process of urban flood risk. And then, a small-scale flood disaster risk assessment model is developed based on Analytic Hierarchy Process(AHP) and Geographic Information System(GIS), and the spatial-temporal distribution of flood risk in Jingdezhen City is analysed. The results show that the risk decreases gradually from the centre line of Changjiang River to the surrounding, and the areas of high flood disaster risk is decreasing from 2010 to 2013 while the risk areas are more concentred. The flood risk of the areas along the Changjiang River is the largest, followed by the low-lying areas in Changjiang District. And the risk is also large in Zhushan District where the population, the industries and commerce are concentrated. The flood risk in the western part of Changjiang District and the north-eastern part of the study area is relatively low. The results can provide scientific support for flood control construction and land development planning in Jingdezhen City.

Information security risk management for computerized health information systems in hospitals: a case study of Iran.

Science.gov (United States)

Zarei, Javad; Sadoughi, Farahnaz

2016-01-01

In recent years, hospitals in Iran - similar to those in other countries - have experienced growing use of computerized health information systems (CHISs), which play a significant role in the operations of hospitals. But, the major challenge of CHIS use is information security. This study attempts to evaluate CHIS information security risk management at hospitals of Iran. This applied study is a descriptive and cross-sectional research that has been conducted in 2015. The data were collected from 551 hospitals of Iran. Based on literature review, experts' opinion, and observations at five hospitals, our intensive questionnaire was designed to assess security risk management for CHISs at the concerned hospitals, which was then sent to all hospitals in Iran by the Ministry of Health. Sixty-nine percent of the studied hospitals pursue information security policies and procedures in conformity with Iran Hospitals Accreditation Standards. At some hospitals, risk identification, risk evaluation, and risk estimation, as well as risk treatment, are unstructured without any specified approach or methodology. There is no significant structured approach to risk management at the studied hospitals. Information security risk management is not followed by Iran's hospitals and their information security policies. This problem can cause a large number of challenges for their CHIS security in future. Therefore, Iran's Ministry of Health should develop practical policies to improve information security risk management in the hospitals of Iran.

Value-informed space systems design and acquisition

Science.gov (United States)

Brathwaite, Joy

Investments in space systems are substantial, indivisible, and irreversible, characteristics that make them high-risk, especially when coupled with an uncertain demand environment. Traditional approaches to system design and acquisition, derived from a performance- or cost-centric mindset, incorporate little information about the spacecraft in relation to its environment and its value to its stakeholders. These traditional approaches, while appropriate in stable environments, are ill-suited for the current, distinctly uncertain, and rapidly changing technical and economic conditions; as such, they have to be revisited and adapted to the present context. This thesis proposes that in uncertain environments, decision-making with respect to space system design and acquisition should be value-based, or at a minimum value-informed. This research advances the value-centric paradigm by providing the theoretical basis, foundational frameworks, and supporting analytical tools for value assessment of priced and unpriced space systems. For priced systems, stochastic models of the market environment and financial models of stakeholder preferences are developed and integrated with a spacecraft-sizing tool to assess the system's net present value. The analytical framework is applied to a case study of a communications satellite, with market, financial, and technical data obtained from the satellite operator, Intelsat. The case study investigates the implications of the value-centric versus the cost-centric design and acquisition choices. Results identify the ways in which value-optimal spacecraft design choices are contingent on both technical and market conditions, and that larger spacecraft for example, which reap economies of scale benefits, as reflected by their decreasing cost-per-transponder, are not always the best (most valuable) choices. Market conditions and technical constraints for which convergence occurs between design choices under a cost-centric and a value

Initial design process of the repository

International Nuclear Information System (INIS)

Osmanlioglu, A.E.

2001-01-01

The concept of the final disposal of high level wastes is to isolate the waste from the biosphere for extremely long periods of time by emplacement of wastes into deep stable geological formations. Several geological formations have been considered as candidate host environments for high level waste disposal and several techniques have been developed for repository design. In this study, interrelationships of main parameters of a general repository design have been defined and effective parameters are shown at each step. Initial design process is based on the long term stability of underground openings as disposal galleries. For this reason, this design process includes two main analyses: mechanical analysis and thermal analysis. Each of the analysis systems is directly related to each other by technical precautions. As a result of this design process, general information about the acceptable depth of the repository, layout and emplacement pattern can be taken. Final design study can be established on the result of initial design process. (author)

Contract Design: The problem of information asymmetry

Directory of Open Access Journals (Sweden)

Axel C. Mühlbacher

2018-01-01

Full Text Available Introduction: Integrated care systems are advocated as an effective method of improving the performance of healthcare systems. These systems outline a payment and care delivery model that intends to tie provider reimbursements to predefined quality metrics. Little is known about the contractual design and the main challenges of delegating “accountability” to these new kinds of organisations and/or contracts. The research question in this article focuses on how healthcare contracts can look like and which possible problems arise in designing such contracts. In this a special interest is placed on information asymmetries.  Methods: A comprehensive literature review on methods of designing contracts in Integrated Care was conducted. This article is the first in a row of three that all contribute to a specific issue in designing healthcare contracts. Starting with the organisation of contracts and information asymmetries, part 2 focusses on financial options and risks and part 3 finally concludes with the question of risk management and evaluation.  Results: Healthcare contracting between providers and payers will have a major impact on the overall design of future healthcare systems. If Integrated care systems or any other similar concept of care delivery are to be contracted directly by payers to manage the continuum of care the costs of market utilisation play an essential role. Transaction costs also arise in the course of the negotiation and implementation of contracts. These costs are the reason why it is generally not possible to conclude perfect (complete contracts. Problems with asymmetric distribution of information can relate to the situation before a contract is concluded (adverse selection and after conclusion of a contract (moral hazard.  Discussion and Conclusions: Information asymmetries are seen as a major obstacle to the efficient operation of integrated care programmes. Coordination and motivation problems cannot be solved

Contract Design: The problem of information asymmetry.

Science.gov (United States)

Mühlbacher, Axel C; Amelung, Volker E; Juhnke, Christin

2018-01-12

Integrated care systems are advocated as an effective method of improving the performance of healthcare systems. These systems outline a payment and care delivery model that intends to tie provider reimbursements to predefined quality metrics. Little is known about the contractual design and the main challenges of delegating "accountability" to these new kinds of organisations and/or contracts. The research question in this article focuses on how healthcare contracts can look like and which possible problems arise in designing such contracts. In this a special interest is placed on information asymmetries. A comprehensive literature review on methods of designing contracts in Integrated Care was conducted. This article is the first in a row of three that all contribute to a specific issue in designing healthcare contracts. Starting with the organisation of contracts and information asymmetries, part 2 focusses on financial options and risks and part 3 finally concludes with the question of risk management and evaluation. Healthcare contracting between providers and payers will have a major impact on the overall design of future healthcare systems. If Integrated care systems or any other similar concept of care delivery are to be contracted directly by payers to manage the continuum of care the costs of market utilisation play an essential role. Transaction costs also arise in the course of the negotiation and implementation of contracts. These costs are the reason why it is generally not possible to conclude perfect (complete) contracts. Problems with asymmetric distribution of information can relate to the situation before a contract is concluded (adverse selection) and after conclusion of a contract (moral hazard). Information asymmetries are seen as a major obstacle to the efficient operation of integrated care programmes. Coordination and motivation problems cannot be solved at no-costs. The presented problems in the design of selective individual contracts

Contract Design: Financial Options and Risk.

Science.gov (United States)

Mühlbacher, Axel C; Amelung, Volker E; Juhnke, Christin

2018-01-12

Integrated care systems as well as accountable care organisations (ACOs) in the US and similar concepts in other countries are advocated as an effective method of improving the performance of healthcare systems. These systems outline a payment and care delivery model that intends to tie provider reimbursements to predefined quality metrics. By this the total costs of care shall be reduced. When designing healthcare options contractors are faced with a variety of financial options. The costs of market utilisation are highly relevant for the conception of healthcare contracts; furthermore contract-specific investments are an obstacle to the efficient operation of ACOs. A comprehensive literature review on methods of designing contracts in Integrated Care was conducted. This article is the second in a row of three that are all published in this issue and contribute to a specific issue in designing healthcare contracts. The first dealt with the organisation of contracts and information asymmetries, while part 3 concludes with the question of risk management and evaluation. The specific research question of this second article focusses on the financial options and reimbursement schemes that are available to define healthcare contracts. A healthcare contract is a relational contract, which determines the level of reimbursement, the scope of services and the quality between service providers and payers, taking account of the risks relating to population and performance. A relational contract is an agreement based upon assumption of a longer timeframe. A major obstacle to the practical implementation of healthcare contracts is the prognosis of the inflows and outflows due to the actuarial risks of the insured population. Financing conditions and reimbursement arrangements that are based on a prospectively determined fixed price, have a significant drawback: it is very difficult to take the differences in health status and the utilisation of distinct insured clientele

Risk Analysis of Accounting Information System Infrastructure

OpenAIRE

MIHALACHE, Arsenie-Samoil

2011-01-01

National economy and security are fully dependent on information technology and infrastructure. At the core of the information infrastructure society relies on, we have the Internet, a system designed initially as a scientists’ forum for unclassified research. The use of communication networks and systems may lead to hazardous situations that generate undesirable effects such as communication systems breakdown, loss of data or taking the wrong decisions. The paper studies the risk analysis of...

Applying Statistical Design to Control the Risk of Over-Design with Stochastic Simulation

Directory of Open Access Journals (Sweden)

Yi Wu

2010-02-01

Full Text Available By comparing a hard real-time system and a soft real-time system, this article elicits the risk of over-design in soft real-time system designing. To deal with this risk, a novel concept of statistical design is proposed. The statistical design is the process accurately accounting for and mitigating the effects of variation in part geometry and other environmental conditions, while at the same time optimizing a target performance factor. However, statistical design can be a very difficult and complex task when using clas-sical mathematical methods. Thus, a simulation methodology to optimize the design is proposed in order to bridge the gap between real-time analysis and optimization for robust and reliable system design.

Risk-informed analysis as a support to the preliminary design of the CEA GFR2400

International Nuclear Information System (INIS)

Bertrand, F.; Bassi, C.; Azria, P.; Bentivoglio, F.; Messie, A.; Balmain, M.

2012-01-01

The integration of safety issues in the early phase of the design of a 4. generation reactor of the concepts is expected. For this purpose, probabilistic insights are increasingly employed in the safety demonstration in combination with the deterministic approach in the frame of a so-called risk informed approach. The present paper deals with the safety assessment of the preliminary design of the GFR2400 developed by CEA and how it has been improved in order to fulfil deterministic criteria as well as to reach a risk level comparable to the generation III reactors. GFR2400 is a 2400 MWth, 3-loops, helium-cooled fast reactor developed at a pre-conceptual design stage whose secondary circuit is filled with a mixture of helium and nitrogen, the ternary circuit being filled with water vaporized in 3 steam generators according to a classical Rankine cycle. The resulting cycle efficiency is very close to 45 %. Considering the results obtained with a preliminary level 1 PSA (L1PSA) model, it emerged that an increased reliability of the DHR (Decay Heat Removal) function in high pressure conditions (not corresponding to a LOCA) was suitable to reduce the overall core damage frequency. On the other hand, some small break LOCA situations were not adequately mitigated according to the line of protection deterministic method. Both issues have been solved by design improvements. In addition, this final L1PSA model, characterized by success criteria based on transient calculations performed with the CATHARE2 code and performed in a perimeter extended to all representative internal initiating events at full operating power, permitted to propose design evolutions that did not increase significantly the CDF. In the same time, those evolutions enabled the DHR system to increase its redundancy level as required in the deterministic approach. Finally, a modified design has been reached implying a more extended covering of various accidental situations by means of a progressive DHR

PROACT: Iterative Design of a Patient-Centered Visualization for Effective Prostate Cancer Health Risk Communication.

Science.gov (United States)

Hakone, Anzu; Harrison, Lane; Ottley, Alvitta; Winters, Nathan; Gutheil, Caitlin; Han, Paul K J; Chang, Remco

2017-01-01

Prostate cancer is the most common cancer among men in the US, and yet most cases represent localized cancer for which the optimal treatment is unclear. Accumulating evidence suggests that the available treatment options, including surgery and conservative treatment, result in a similar prognosis for most men with localized prostate cancer. However, approximately 90% of patients choose surgery over conservative treatment, despite the risk of severe side effects like erectile dysfunction and incontinence. Recent medical research suggests that a key reason is the lack of patient-centered tools that can effectively communicate personalized risk information and enable them to make better health decisions. In this paper, we report the iterative design process and results of developing the PROgnosis Assessment for Conservative Treatment (PROACT) tool, a personalized health risk communication tool for localized prostate cancer patients. PROACT utilizes two published clinical prediction models to communicate the patients' personalized risk estimates and compare treatment options. In collaboration with the Maine Medical Center, we conducted two rounds of evaluations with prostate cancer survivors and urologists to identify the design elements and narrative structure that effectively facilitate patient comprehension under emotional distress. Our results indicate that visualization can be an effective means to communicate complex risk information to patients with low numeracy and visual literacy. However, the visualizations need to be carefully chosen to balance readability with ease of comprehension. In addition, due to patients' charged emotional state, an intuitive narrative structure that considers the patients' information need is critical to aid the patients' comprehension of their risk information.

Risk calculations in the manufacturing technology selection process

DEFF Research Database (Denmark)

Farooq, S.; O'Brien, C.

2010-01-01

Purpose - The purpose of this paper is to present result obtained from a developed technology selection framework and provide a detailed insight into the risk calculations and their implications in manufacturing technology selection process. Design/methodology/approach - The results illustrated...... in the paper are the outcome of an action research study that was conducted in an aerospace company. Findings - The paper highlights the role of risk calculations in manufacturing technology selection process by elaborating the contribution of risk associated with manufacturing technology alternatives...... in the shape of opportunities and threats in different decision-making environments. Practical implications - The research quantifies the risk associated with different available manufacturing technology alternatives. This quantification of risk crystallises the process of technology selection decision making...

Uncertainties in Early-Stage Capital Cost Estimation of Process Design – A Case Study on Biorefinery Design

International Nuclear Information System (INIS)

Cheali, Peam; Gernaey, Krist V.; Sin, Gürkan

2015-01-01

Capital investment, next to the product demand, sales, and production costs, is one of the key metrics commonly used for project evaluation and feasibility assessment. Estimating the investment costs of a new product/process alternative during early-stage design is a challenging task, which is especially relevant in biorefinery research where information about new technologies and experience with new technologies is limited. A systematic methodology for uncertainty analysis of cost data is proposed that employs: (a) bootstrapping as a regression method when cost data are available; and, (b) the Monte Carlo technique as an error propagation method based on expert input when cost data are not available. Four well-known models for early-stage cost estimation are reviewed and analyzed using the methodology. The significance of uncertainties of cost data for early-stage process design is highlighted using the synthesis and design of a biorefinery as a case study. The impact of uncertainties in cost estimation on the identification of optimal processing paths is indeed found to be profound. To tackle this challenge, a comprehensive techno-economic risk analysis framework is presented to enable robust decision-making under uncertainties. One of the results using order-of-magnitude estimates shows that the production of diethyl ether and 1,3-butadiene are the most promising with the lowest economic risks (among the alternatives considered) of 0.24 MM$/a and 4.6 MM$/a, respectively.

Uncertainties in Early Stage Capital Cost Estimation of Process Design – A case study on biorefinery design

Directory of Open Access Journals (Sweden)

Gurkan eSin

2015-02-01

Full Text Available Capital investment, next to the product demand, sales and production costs, is one of the key metrics commonly used for project evaluation and feasibility assessment. Estimating the investment costs of a new product/process alternative during early stage design is a challenging task. This is especially important in biorefinery research, where available information and experiences with new technologies is limited. A systematic methodology for uncertainty analysis of cost data is proposed that employs (a Bootstrapping as a regression method when cost data is available and (b the Monte Carlo technique as an error propagation method based on expert input when cost data is not available. Four well-known models for early stage cost estimation are reviewed an analyzed using the methodology. The significance of uncertainties of cost data for early stage process design is highlighted using the synthesis and design of a biorefinery as a case study. The impact of uncertainties in cost estimation on the identification of optimal processing paths is found to be profound. To tackle this challenge, a comprehensive techno-economic risk analysis framework is presented to enable robust decision making under uncertainties. One of the results using an order-of-magnitude estimate shows that the production of diethyl ether and 1,3-butadiene are the most promising with economic risks of 0.24 MM$/a and 4.6 MM$/a due to uncertainties in cost estimations, respectively.

Uncertainties in Early-Stage Capital Cost Estimation of Process Design – A Case Study on Biorefinery Design

Energy Technology Data Exchange (ETDEWEB)

Cheali, Peam; Gernaey, Krist V.; Sin, Gürkan, E-mail: gsi@kt.dtu.dk [Department of Chemical and Biochemical Engineering, Technical University of Denmark, Lyngby (Denmark)

2015-02-06

Capital investment, next to the product demand, sales, and production costs, is one of the key metrics commonly used for project evaluation and feasibility assessment. Estimating the investment costs of a new product/process alternative during early-stage design is a challenging task, which is especially relevant in biorefinery research where information about new technologies and experience with new technologies is limited. A systematic methodology for uncertainty analysis of cost data is proposed that employs: (a) bootstrapping as a regression method when cost data are available; and, (b) the Monte Carlo technique as an error propagation method based on expert input when cost data are not available. Four well-known models for early-stage cost estimation are reviewed and analyzed using the methodology. The significance of uncertainties of cost data for early-stage process design is highlighted using the synthesis and design of a biorefinery as a case study. The impact of uncertainties in cost estimation on the identification of optimal processing paths is indeed found to be profound. To tackle this challenge, a comprehensive techno-economic risk analysis framework is presented to enable robust decision-making under uncertainties. One of the results using order-of-magnitude estimates shows that the production of diethyl ether and 1,3-butadiene are the most promising with the lowest economic risks (among the alternatives considered) of 0.24 MM$/a and 4.6 MM$/a, respectively.

Processes in construction of failure management expert systems from device design information

Science.gov (United States)

Malin, Jane T.; Lance, Nick

1987-01-01

This paper analyzes the tasks and problem solving methods used by an engineer in constructing a failure management expert system from design information about the device to te diagnosed. An expert test engineer developed a trouble-shooting expert system based on device design information and experience with similar devices, rather than on specific expert knowledge gained from operating the device or troubleshooting its failures. The construction of the expert system was intensively observed and analyzed. This paper characterizes the knowledge, tasks, methods, and design decisions involved in constructing this type of expert system, and makes recommendations concerning tools for aiding and automating construction of such systems.

Improving Information Security Risk Management

Science.gov (United States)

Singh, Anand

2009-01-01

manaOptimizing risk to information to protect the enterprise as well as to satisfy government and industry mandates is a core function of most information security departments. Risk management is the discipline that is focused on assessing, mitigating, monitoring and optimizing risks to information. Risk assessments and analyses are critical…

Information security risk management for computerized health information systems in hospitals: a case study of Iran

Science.gov (United States)

Zarei, Javad; Sadoughi, Farahnaz

2016-01-01

Background In recent years, hospitals in Iran – similar to those in other countries – have experienced growing use of computerized health information systems (CHISs), which play a significant role in the operations of hospitals. But, the major challenge of CHIS use is information security. This study attempts to evaluate CHIS information security risk management at hospitals of Iran. Materials and methods This applied study is a descriptive and cross-sectional research that has been conducted in 2015. The data were collected from 551 hospitals of Iran. Based on literature review, experts’ opinion, and observations at five hospitals, our intensive questionnaire was designed to assess security risk management for CHISs at the concerned hospitals, which was then sent to all hospitals in Iran by the Ministry of Health. Results Sixty-nine percent of the studied hospitals pursue information security policies and procedures in conformity with Iran Hospitals Accreditation Standards. At some hospitals, risk identification, risk evaluation, and risk estimation, as well as risk treatment, are unstructured without any specified approach or methodology. There is no significant structured approach to risk management at the studied hospitals. Conclusion Information security risk management is not followed by Iran’s hospitals and their information security policies. This problem can cause a large number of challenges for their CHIS security in future. Therefore, Iran’s Ministry of Health should develop practical policies to improve information security risk management in the hospitals of Iran. PMID:27313481

Occupational Risks Associated with Solid Waste Management in the Informal Sector of Gweru, Zimbabwe.

Science.gov (United States)

Jerie, Steven

2016-01-01

This study identifies and analyses the occupational risks associated with solid waste management practices in the informal enterprises of Gweru. Many concerns have been raised about the potential harm from waste to the environment and the general public, but the risks and consequent costs of occupational hazards in waste management have received little attention in the rush to adopt or adapt technologies such as composting. A multimethods research design that triangulates qualitative and quantitative research paradigms is employed in this study. The quantitative design involves physical characterisation of solid waste through material component separation and measurements as well as a questionnaire survey that investigates the risks associated with waste management. The qualitative component includes interviews, open-ended questionnaires, and field observations. Occupational risks occur at every stage in the waste management process, from the point where workers handle waste in the enterprises for collection or recycling to the point of ultimate disposal. Key findings from the study revealed that solid waste management practices are dominated by manual handling tasks hence the higher incidents of muscular-skeletal disorders. Other safety and health hazards associated with waste management in the informal enterprises of Gweru include incidents of diarrhoea, viral hepatitis, and higher incidents of obstructive and restrictive disorders.

Occupational Risks Associated with Solid Waste Management in the Informal Sector of Gweru, Zimbabwe

Science.gov (United States)

Jerie, Steven

2016-01-01

This study identifies and analyses the occupational risks associated with solid waste management practices in the informal enterprises of Gweru. Many concerns have been raised about the potential harm from waste to the environment and the general public, but the risks and consequent costs of occupational hazards in waste management have received little attention in the rush to adopt or adapt technologies such as composting. A multimethods research design that triangulates qualitative and quantitative research paradigms is employed in this study. The quantitative design involves physical characterisation of solid waste through material component separation and measurements as well as a questionnaire survey that investigates the risks associated with waste management. The qualitative component includes interviews, open-ended questionnaires, and field observations. Occupational risks occur at every stage in the waste management process, from the point where workers handle waste in the enterprises for collection or recycling to the point of ultimate disposal. Key findings from the study revealed that solid waste management practices are dominated by manual handling tasks hence the higher incidents of muscular-skeletal disorders. Other safety and health hazards associated with waste management in the informal enterprises of Gweru include incidents of diarrhoea, viral hepatitis, and higher incidents of obstructive and restrictive disorders. PMID:27418935

INFORMED DESIGN DECISION-MAKING: FROM DIGITAL ANALYSIS TO URBAN DESIGN

Directory of Open Access Journals (Sweden)

Camilla Pezzica

2017-11-01

Full Text Available This study describes a new approach to explore the design of public open spaces based on a multidimensional analysis useful to inform decision-making and foster the development of evidence-based architectural solutions. It presents an overview of the most relevant design variables and their constraints, providing, in this way, valuable information for the elaboration of a more sustainable urban design, considerate of the local socio-cultural values. This research aims at providing holistic guidance for the development of better design proposals in contemporary urban environments. More specifically, it seeks to synchronously characterize urban spaces at a multi-scale and multidimensional level, both quantitatively and qualitatively, by collecting contributions from Space Syntax Theory, Public Life Studies, Building Science and Environmental/Comfort Analysis in public open spaces. Many advanced digital tools are used for data management purposes and to generate and test iteratively different design proposals. The proposed methodology is based on a range of tests and analyses performed in the process of developing a new experimental project for Largo da Graça, an urban square located in Lisbon’s historic centre, which allowed the testing of different design solutions. This experiment generated a digital workflow for the design of the urban square, in which are registered all the steps undertaken to solve the many design problems identified by considering the efficiency targets (centrality, connectivity, enclosure, thermal comfort, security, social equity and interaction. The process comprises a sequence of comparative design reviews and records the choices made when dealing with latent information underlying changing conditions in the use of public space and the programmatic malleability of the Portuguese plaza. The description of the adopted design strategy and the examples extracted from the workflow are used to illustrate the practical

Information risk and security modeling

Science.gov (United States)

Zivic, Predrag

2005-03-01

This research paper presentation will feature current frameworks to addressing risk and security modeling and metrics. The paper will analyze technical level risk and security metrics of Common Criteria/ISO15408, Centre for Internet Security guidelines, NSA configuration guidelines and metrics used at this level. Information IT operational standards view on security metrics such as GMITS/ISO13335, ITIL/ITMS and architectural guidelines such as ISO7498-2 will be explained. Business process level standards such as ISO17799, COSO and CobiT will be presented with their control approach to security metrics. Top level, the maturity standards such as SSE-CMM/ISO21827, NSA Infosec Assessment and CobiT will be explored and reviewed. For each defined level of security metrics the research presentation will explore the appropriate usage of these standards. The paper will discuss standards approaches to conducting the risk and security metrics. The research findings will demonstrate the need for common baseline for both risk and security metrics. This paper will show the relation between the attribute based common baseline and corporate assets and controls for risk and security metrics. IT will be shown that such approach spans over all mentioned standards. The proposed approach 3D visual presentation and development of the Information Security Model will be analyzed and postulated. Presentation will clearly demonstrate the benefits of proposed attributes based approach and defined risk and security space for modeling and measuring.

Testing Map Features Designed to Convey the Uncertainty of Cancer Risk: Insights Gained From Assessing Judgments of Information Adequacy and Communication Goals.

Science.gov (United States)

Severtson, Dolores J

2015-02-01

Barriers to communicating the uncertainty of environmental health risks include preferences for certain information and low numeracy. Map features designed to communicate the magnitude and uncertainty of estimated cancer risk from air pollution were tested among 826 participants to assess how map features influenced judgments of adequacy and the intended communication goals. An uncertain versus certain visual feature was judged as less adequate but met both communication goals and addressed numeracy barriers. Expressing relative risk using words communicated uncertainty and addressed numeracy barriers but was judged as highly inadequate. Risk communication and visual cognition concepts were applied to explain findings.

Design and analysis of information model hotel complex

Directory of Open Access Journals (Sweden)

Garyaev Nikolai

2016-01-01

Full Text Available The article analyzes the innovation in 3D modeling and development of process design approaches based on visualization of information technology and computer-aided design systems. The problems arising in the modern design and the approach to address them.

Does Iconicity in Pictographs Matter? The Influence of Iconicity and Numeracy on Information Processing, Decision Making, and Liking in an Eye-Tracking Study.

Science.gov (United States)

Kreuzmair, Christina; Siegrist, Michael; Keller, Carmen

2017-03-01

Researchers recommend the use of pictographs in medical risk communication to improve people's risk comprehension and decision making. However, it is not yet clear whether the iconicity used in pictographs to convey risk information influences individuals' information processing and comprehension. In an eye-tracking experiment with participants from the general population (N = 188), we examined whether specific types of pictograph icons influence the processing strategy viewers use to extract numerical information. In addition, we examined the effect of iconicity and numeracy on probability estimation, recall, and icon liking. This experiment used a 2 (iconicity: blocks vs. restroom icons) × 2 (scenario: medical vs. nonmedical) between-subject design. Numeracy had a significant effect on information processing strategy, but we found no effect of iconicity or scenario. Results indicated that both icon types enabled high and low numerates to use their default way of processing and extracting the gist of the message from the pictorial risk communication format: high numerates counted icons, whereas low numerates used large-area processing. There was no effect of iconicity in the probability estimation. However, people who saw restroom icons had a higher probability of correctly recalling the exact risk level. Iconicity had no effect on icon liking. Although the effects are small, our findings suggest that person-like restroom icons in pictographs seem to have some advantages for risk communication. Specifically, in nonpersonalized prevention brochures, person-like restroom icons may maintain reader motivation for processing the risk information. © 2016 Society for Risk Analysis.

The NASA Continuous Risk Management Process

Science.gov (United States)

Pokorny, Frank M.

2004-01-01

As an intern this summer in the GRC Risk Management Office, I have become familiar with the NASA Continuous Risk Management Process. In this process, risk is considered in terms of the probability that an undesired event will occur and the impact of the event, should it occur (ref., NASA-NPG: 7120.5). Risk management belongs in every part of every project and should be ongoing from start to finish. Another key point is that a risk is not a problem until it has happened. With that in mind, there is a six step cycle for continuous risk management that prevents risks from becoming problems. The steps are: identify, analyze, plan, track, control, and communicate & document. Incorporated in the first step are several methods to identify risks such as brainstorming and using lessons learned. Once a risk is identified, a risk statement is made on a risk information sheet consisting of a single condition and one or more consequences. There can also be a context section where the risk is explained in more detail. Additionally there are three main goals of analyzing a risk, which are evaluate, classify, and prioritize. Here is where a value is given to the attributes of a risk &e., probability, impact, and timeframe) based on a multi-level classification system (e.g., low, medium, high). It is important to keep in mind that the definitions of these levels are probably different for each project. Furthermore the risks can be combined into groups. Then, the risks are prioritized to see what risk is necessary to mitigate first. After the risks are analyzed, a plan is made to mitigate as many risks as feasible. Each risk should be assigned to someone in the project with knowledge in the area of the risk. Then the possible approaches to choose from are: research, accept, watch, or mitigate. Next, all risks, mitigated or not, are tracked either individually or in groups. As the plan is executed, risks are re-evaluated, and the attribute values are adjusted as necessary. Metrics

OPERATIONS RESEARCH IN THE DESIGN OF MANAGEMENT INFORMATION SYSTEMS

Science.gov (United States)

management information systems is concerned with the identification and detailed specification of the information and data processing...of advanced data processing techniques in management information systems today, the close coordination of operations research and data systems activities has become a practical necessity for the modern business firm.... information systems in which mathematical models are employed as the basis for analysis and systems design. Operations research provides a

Supply chain risk management processes for resilience: A study of South African grocery manufacturers

Directory of Open Access Journals (Sweden)

Simon Simba

2017-09-01

Full Text Available Background: The supply chain risk management (SCRM process is aimed at the implementation of strategies that assist in managing both daily and exceptional risks facing the supply chain through continuous risk assessment to reduce vulnerability and ensure continuity. Purpose: The purpose of the study was to determine whether the SCRM process enables supply chain resilience among grocery manufacturers in South Africa. The fast-moving consumer goods (FMCG-manufacturing industry faces increased risk because of the nature of their products being perishable with a limited shelf life. Method: This study was conducted using a descriptive qualitative research design. Data were collected by means of 12 semi-structured interviews with senior supply chain practitioners within the South African grocery manufacturing industry. Findings: The study found that most firms informally implement SCRM processes of risk identification, assessment, mitigation and monitoring to mitigate disruptions. Furthermore, the findings indicate that the SCRM processes facilitate resilience among grocery manufacturers in South Africa. Conclusion: The managerial implications show that supply chain managers of grocery manufacturers should formalise the SCRM process and develop risk assessment scales to better prioritise risks in order to run a resilient supply chain. The research contributes to the supply chain management field by adding to the scarce literature relating to SCRM as an enabler of supply chain resilience in a South African context.

The role of fear and threat in communicating risk scenarios and the need for actions. Effect of fear on information processing

Energy Technology Data Exchange (ETDEWEB)

Meijnders, A.L.; Midden, C.J.H. [Eindhoven University of Technology, Faculty of Philosophy and Social Sciences, Department of Psychology and Linguistics, Eindhoven (Netherlands); Wilke, H.A.M. [Leiden University, Faculty of Social Sciences, Department of Social and Organizational Psychology, Leiden (Netherlands)

1995-12-31

The results of a first experiment regarding the title subject, in which we examined whether fear of environmental risks increases the tendency to carefully process information on environmentally sound behaviour, are discussed. 2 figs., 10 refs.

Study on information dissemination for effective nuclear risk communication

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

The aim of this study are to develop an information system and guideline for nuclear risk communication between expert and citizens as well as between both experts in terms of lessons learned from serious disaster such as Fukushima Dai-ich NPP accident. Technical standards for disseminating a result and process of seismic/tsunami PRA (Probabilistic Risk Assessment) of nuclear facility as well as nuclear risk information in an emergency, and risk communication in normal times are needed. Tins study examines the framework, contents, and technical basis for developing an information system for nuclear risk communication. In addition, this study identifies the communication issues of nuclear risk communication concerning the seismic/tsunami PRA through the testing information systems in areas around nuclear facilities and by providing effective implementation guidelines. JNES has developed the information system specified as Protection of Nuclear Power Plants against Tsunamis and Post Earthquake considerations in the External Zone (TiPEEZ) as part of IAEA International Seismic Safety Centre (ISSC) Extra Budgetary Programme (EBP). The EBP is currently preparing technical documents (TECDOC) regarding the implementation of the TiPEEZ. After the Fukushima accident, there has been increasing demand for disaster mitigation systems to share risk information between nuclear organizations and local municipalities. JNES and Niigata Institute of Technology conduct implementation of TiPEEZ for the practical use based on the corroborative works with Kashiwazaki city and citizens. (author)

Study on information dissemination for effective nuclear risk communication

International Nuclear Information System (INIS)

2013-01-01

The aim of this study are to develop an information system and guideline for nuclear risk communication between expert and citizens as well as between both experts in terms of lessons learned from serious disaster such as Fukushima Dai-ich NPP accident. Technical standards for disseminating a result and process of seismic/tsunami PRA (Probabilistic Risk Assessment) of nuclear facility as well as nuclear risk information in an emergency, and risk communication in normal times are needed. Tins study examines the framework, contents, and technical basis for developing an information system for nuclear risk communication. In addition, this study identifies the communication issues of nuclear risk communication concerning the seismic/tsunami PRA through the testing information systems in areas around nuclear facilities and by providing effective implementation guidelines. JNES has developed the information system specified as Protection of Nuclear Power Plants against Tsunamis and Post Earthquake considerations in the External Zone (TiPEEZ) as part of IAEA International Seismic Safety Centre (ISSC) Extra Budgetary Programme (EBP). The EBP is currently preparing technical documents (TECDOC) regarding the implementation of the TiPEEZ. After the Fukushima accident, there has been increasing demand for disaster mitigation systems to share risk information between nuclear organizations and local municipalities. JNES and Niigata Institute of Technology conduct implementation of TiPEEZ for the practical use based on the corroborative works with Kashiwazaki city and citizens. (author)

Musical Instrument Design Process for Mobile Technology

OpenAIRE

Barraclough, Timothy J.; Carnegie, Dale A.; Kapur, Ajay

2015-01-01

This paper presents the iterative design process based upon multiple rounds of user studies that guided the the design of a novel social music application, Pyxis Minor. The application was designed based on the concept of democratising electronic music creation and performance. This required the development to be based upon user studies to inform and drive the development process in order to create a novel musical interface that can be enjoyed by users of any prior musicianship training.

Television advertisement format and the provision of risk information about prescription drug products.

Science.gov (United States)

Glinert, Lewis H; Schommer, Jon C

2005-06-01

Considerable attention has been afforded to analyzing the content of and assessing consumers' reaction to print direct-to-consumer drug ads, but not so for televised ads. To determine whether advertisements with different risk severity and risk presentation would significantly affect viewers' (1) recall of information contained in the advertisement, (2) evaluation of the advertisement, and (3) perceptions of the advertised product's risks. Data were collected from a sample of 135 first-year pharmacy students at a Midwestern college of pharmacy. After viewing 1 of the 6 advertisements designed for this study, participants were asked to complete a self-administered survey. Chi-square and analysis of variance were used to analyze the data. A 2x3 between subjects design was used to test the effects of 2 levels of risk severity (high- vs low-risk severity) and 3 levels of risk presentation (original ad containing integrated risk message, deintegrated risk message/dual modality using male voice-over, deintegrated risk message/dual modality using female voice-over). Results of analysis of variance procedures revealed that deintegrating risk information by placing it at the end of the advertisement and the use of captions in addition to oral messages (dual modality) (1) improved the recall of general and specific side effect information, (2) led to a perception that the advertisement had greater informational content, (3) resulted in lower Advertisement Distraction, and (4) lessened cognitive and affective aspects of information overload for the advertisement containing the high-risk severity medication. However, this pattern of findings was not found for the low-risk severity medication. Alternative methods for presenting risk information in direct-to-consumer ads affected some aspects of information recall and advertisement evaluation, but were not shown to affect risk perceptions regarding the advertised products.

A decision model for the risk management of hazardous processes

International Nuclear Information System (INIS)

Holmberg, J.E.

1997-03-01

A decision model for risk management of hazardous processes as an optimisation problem of a point process is formulated in the study. In the approach, the decisions made by the management are divided into three categories: (1) planned process lifetime, (2) selection of the design and, (3) operational decisions. These three controlling methods play quite different roles in the practical risk management, which is also reflected in our approach. The optimisation of the process lifetime is related to the licensing problem of the process. It provides a boundary condition for a feasible utility function that is used as the actual objective function, i.e., maximizing the process lifetime utility. By design modifications, the management can affect the inherent accident hazard rate of the process. This is usually a discrete optimisation task. The study particularly concentrates upon the optimisation of the operational strategies given a certain design and licensing time. This is done by a dynamic risk model (marked point process model) representing the stochastic process of events observable or unobservable to the decision maker. An optimal long term control variable guiding the selection of operational alternatives in short term problems is studied. The optimisation problem is solved by the stochastic quasi-gradient procedure. The approach is illustrated by a case study. (23 refs.)

Information security risk analysis

CERN Document Server

Peltier, Thomas R

2001-01-01

Effective Risk AnalysisQualitative Risk AnalysisValue AnalysisOther Qualitative MethodsFacilitated Risk Analysis Process (FRAP)Other Uses of Qualitative Risk AnalysisCase StudyAppendix A: QuestionnaireAppendix B: Facilitated Risk Analysis Process FormsAppendix C: Business Impact Analysis FormsAppendix D: Sample of ReportAppendix E: Threat DefinitionsAppendix F: Other Risk Analysis OpinionsIndex

HUD INFORMATION SYSTEMS: Immature Software Acquisition Capability Increases Project Risks

National Research Council Canada - National Science Library

2001-01-01

.... GAO has designated HUD's major program areas as high risk, in part because the department's information and financial management systems were poorly integrated, ineffective, and generally unreliable...

Privacy and information security risks in a technology platform for home-based chronic disease rehabilitation and education.

Science.gov (United States)

Henriksen, Eva; Burkow, Tatjana M; Johnsen, Elin; Vognild, Lars K

2013-08-09

Privacy and information security are important for all healthcare services, including home-based services. We have designed and implemented a prototype technology platform for providing home-based healthcare services. It supports a personal electronic health diary and enables secure and reliable communication and interaction with peers and healthcare personnel. The platform runs on a small computer with a dedicated remote control. It is connected to the patient's TV and to a broadband Internet. The platform has been tested with home-based rehabilitation and education programs for chronic obstructive pulmonary disease and diabetes. As part of our work, a risk assessment of privacy and security aspects has been performed, to reveal actual risks and to ensure adequate information security in this technical platform. Risk assessment was performed in an iterative manner during the development process. Thus, security solutions have been incorporated into the design from an early stage instead of being included as an add-on to a nearly completed system. We have adapted existing risk management methods to our own environment, thus creating our own method. Our method conforms to ISO's standard for information security risk management. A total of approximately 50 threats and possible unwanted incidents were identified and analysed. Among the threats to the four information security aspects: confidentiality, integrity, availability, and quality; confidentiality threats were identified as most serious, with one threat given an unacceptable level of High risk. This is because health-related personal information is regarded as sensitive. Availability threats were analysed as low risk, as the aim of the home programmes is to provide education and rehabilitation services; not for use in acute situations or for continuous health monitoring. Most of the identified threats are applicable for healthcare services intended for patients or citizens in their own homes. Confidentiality

A Social Information Processing Approach to Job Attitudes and Task Design

Science.gov (United States)

Salancik, Gerald R.; Pfeffer, Jeffrey

1978-01-01

In comparison with need-satisfaction and expectancy models of job attitudes and motivation, the social information processing perspective emphasizes the effects of context and the consequences of past choices, rather than individual predispositions and rational decision-making processes. (Author)

Conjoint Management of Business Processes and Information Technologies

DEFF Research Database (Denmark)

Siurdyban, Artur

and improve business processes. As a consequence, there is a growing need to address managerial aspects of the relationships between information technologies and business processes. The aim of this PhD study is to investigate how the practice of conjoint management of business processes and information...... technologies can be supported and improved. The study is organized into five research papers and this summary. Each paper addresses a different aspect of conjoint management of business processes and information technologies, i.e. problem development and managerial practices on software...... and information technologies in a project environment. It states that both elements are intrinsically related and should be designed and considered together. The second case examines the relationships between information technology management and business process management. It discusses the multi-faceted role...

Managing Risk in Information Resources and Services Provision in ...

African Journals Online (AJOL)

Risk management forms an integral part of the Library's planning and monitoring process and its internal control framework. It is therefore a vital element of good governance and management. This paper discusses the strategies for managing risks in the provision of information services in University Libraries. The concept ...

Usage of information safety requirements in improving tube bending process

Science.gov (United States)

Livshitz, I. I.; Kunakov, E.; Lontsikh, P. A.

2018-05-01

This article is devoted to an improvement of the technological process's analysis with the information security requirements implementation. The aim of this research is the competition increase analysis in aircraft industry enterprises due to the information technology implementation by the example of the tube bending technological process. The article analyzes tube bending kinds and current technique. In addition, a potential risks analysis in a tube bending technological process is carried out in terms of information security.

Risk-informed decision making during Bohunice NPP safety upgrading

International Nuclear Information System (INIS)

Lipar, M.; Muzikova, E.; Kubanyi, J.

2001-01-01

The paper summarizes some facts of risk-informed regulation developments within UJD regulatory environment. Based on national as well as international operating experience and indications resulted from PSA, Nuclear Regulatory Authority of the Slovak Republic (UJD) since its constituting in 1993 has devoted an effort to use PSA technology to support the regulatory policy in Slovakia. The PSA is considered a complement, not a substitute, to the deterministic approach. Suchlike integrated approach is used in decision making processes and the final decision on scope and priorities is based on it. The paper outlines risk insights used in the decision making process concerning Bohunice NPP safety upgrading and focuses on the role of PSA results in Gradual Reconstruction of Bohunice VI NPP. Besides, two other examples of the PSA results application to the decision making process are provided: the assessment of proposal of modifications to the main power supply diagram (incorporation of generator switches) and the assessment of licensee request for motor generator AOT (Allowable Outage Time) extension. As an example of improving support of Bohunice V-2 risk-informed operations, concept of AOT calculations and Bohunice V-2 Risk Monitor Project are briefly described. (author)

Enhancing the effects of a narrative message through experiential information processing: An experimental study.

Science.gov (United States)

Dillard, Amanda J; Hisler, Garrett

2015-01-01

First-person narratives are becoming a popular means to communicate health risk information. Although studies show they can increase risk perception and motivate health behaviours compared to statistical messages, more research on the conditions in which they are particularly likely to have effects is needed. In this study, we tested a moderator related to how information is processed. Specifically, we hypothesised that thinking in terms of emotions and personal experiences - known as experiential information processing - would increase people's responsiveness to a narrative. Female college students (N = 138) who reported indoor tanning were randomly assigned to read a first-person narrative message or a statistical message about the risks of skin cancer. Prior to reading the message, the women received instructions that would activate either experiential or rational information processing. Participants then reported their risk perceptions of skin cancer, worry about skin cancer and behaviour intentions related to skin cancer. Analyses showed that message type and information processing interacted to influence risk perceptions and worry. Consistent with hypotheses, participants reported the highest risk perception and worry when they used an experiential information system prior to reading the narrative message. There were no effects on behaviour intentions. Implications of these findings are discussed.

Exposure Estimation and Interpretation of Occupational Risk: Enhanced Information for the Occupational Risk Manager

Science.gov (United States)

Waters, Martha; McKernan, Lauralynn; Maier, Andrew; Jayjock, Michael; Schaeffer, Val; Brosseau, Lisa

2015-01-01

The fundamental goal of this article is to describe, define, and analyze the components of the risk characterization process for occupational exposures. Current methods are described for the probabilistic characterization of exposure, including newer techniques that have increasing applications for assessing data from occupational exposure scenarios. In addition, since the probability of health effects reflects variability in the exposure estimate as well as the dose-response curve—the integrated considerations of variability surrounding both components of the risk characterization provide greater information to the occupational hygienist. Probabilistic tools provide a more informed view of exposure as compared to use of discrete point estimates for these inputs to the risk characterization process. Active use of such tools for exposure and risk assessment will lead to a scientifically supported worker health protection program. Understanding the bases for an occupational risk assessment, focusing on important sources of variability and uncertainty enables characterizing occupational risk in terms of a probability, rather than a binary decision of acceptable risk or unacceptable risk. A critical review of existing methods highlights several conclusions: (1) exposure estimates and the dose-response are impacted by both variability and uncertainty and a well-developed risk characterization reflects and communicates this consideration; (2) occupational risk is probabilistic in nature and most accurately considered as a distribution, not a point estimate; and (3) occupational hygienists have a variety of tools available to incorporate concepts of risk characterization into occupational health and practice. PMID:26302336

A design methodology for materials control and accounting information systems

International Nuclear Information System (INIS)

Helman, P.; Strittmatter, R.B.

1987-01-01

Modern approaches to nuclear materials safeguards have significantly increased the data processing needs of safeguards information systems. Implementing these approaches will require developing efficient, cost-effective designs. Guided by database design research, we are developing a design methodology for distributed materials control and accounting (MCandA) information systems. The methodology considers four design parameters: network topology, allocation of data to nodes, high-level global processing strategy, and local file structures to optimize system performance. Characteristics of system performance that are optimized are response time for an operation, timeliness of data, validity of data, and reliability. The ultimate goal of the research is to develop a comprehensive computerized design tool specifically tailored to the design of MCandA systems

The Information Infrastructures Design Space

DEFF Research Database (Denmark)

Henningsson, Stefan; Rapti, Charikleia; Jensen, Thomas

2017-01-01

This paper develops a framework for characterising the design space of Information Infrastructures (IIs). Existing research has generally sought to unravel the convergent characteristics and mechanisms uniting IIs across a wide range of manifestations. In this research, we explore this divergence...... within the II design space. We do so by reviewing the II literature, focusing on the two domains of design situation and design resolution. Design situation refers to the relevant dimensions of the context in which an II is employed. Design resolution covers the dimensions along which the socio......-technical constituents can be assembled to form an effective solution. The resulting framework allows for the comparing and contrasting of II initiatives, and contributes towards a cumulative knowledge process aimed at a more refined understanding of how an II can be configured to address the specific problem at hand....

Contract Design: Risk Management and Evaluation.

Science.gov (United States)

Mühlbacher, Axel C; Amelung, Volker E; Juhnke, Christin

2018-01-12

Effective risk adjustment is an aspect that is more and more given weight on the background of competitive health insurance systems and vital healthcare systems. The risk structure of the providers plays a vital role in Pay for Performance. A prerequisite for optimal incentive-based service models is a (partial) dependence of the agent's returns on the provider's gain level. Integrated care systems as well as accountable care organisations (ACOs) in the US and similar concepts in other countries are advocated as an effective method of improving the performance of healthcare systems. These systems outline a payment and care delivery model that intends to tie provider reimbursements to predefined quality metrics. By this the total costs of care shall be reduced. Little is known about the contractual design and the main challenges of delegating "accountability" to these new kinds of organisations and/or contracts. The costs of market utilisation are highly relevant for the conception of healthcare contracts; furthermore information asymmetries and contract-specific investments are an obstacle to the efficient operation of ACOs. A comprehensive literature review on methods of designing contracts in Integrated Care was conducted. The research question in this article focuses on how reimbursement strategies, evaluation of measures and methods of risk adjustment can best be integrated in healthcare contracting. Each integrated care contract includes challenges for both payers and providers without having sufficient empirical data on both sides. These challenges are clinical, administrative or financial nature. Risk adjusted contracts ensure that the reimbursement roughly matches the true costs resulting from the morbidity of a population. If reimbursement of care provider corresponds to the actual expenses for an individual/population the problem of risk selection is greatly reduced. The currently used methods of risk adjustment have widely differing model and forecast

Risk Importance Determination Process of CANDU Maintenance Rule Function

International Nuclear Information System (INIS)

Seo, Mi Ro; Jo, Ha Yan; Hwang, Mi Jeong

2009-01-01

In Korea, Maintenance Rule (MR) programs development for all PWR were completed. However, in case of PHWR (CANDU type, Wolsong Unit 1,2,3,4), the study of MR program was delayed, since the design concepts and operating experiences are different from those of PWR. This paper describes the process and results for the risk importance determination process of functions in scope. The risk importance was determined by PSA Basic Event Mapping and Delphi method. For Delphi evaluation, Delphi evaluation item for CANDU need to be developed because the design and normal operation functions are different from PWR

Overview of the plant risk status information management system

International Nuclear Information System (INIS)

Kirchner, J.R.; Campbell, D.J.

1987-01-01

The Plant Risk Status Information Management System (PRISIM) is a personal computer program that presents PRA results and related information for use by decision-makers. The program was originally developed for NRC inspectors, but now an expanded version of the program with more potential applications is complete. Prototypes of both versions have been developed for Arkansas Nuclear One - Unit 1, and the inspection-related version is currently being field-tested. Interim results of these field tests are favorable. The PRISIM database contains both pre-processed information that is useful for long-term planning and a plant risk model for assessing the risk implications of the current plant status. The program provides rapid access to specific information by making extensive use of menus. Development of PRISIM programs for Peach Bottom-Unit 2 is underway, and there are plans to create programs for other plants

Design Process Improvement for Electric CAR Harness

Science.gov (United States)

Sawatdee, Thiwarat; Chutima, Parames

2017-06-01

In an automobile parts design company, the customer satisfaction is one of the most important factors for product design. Therefore, the company employs all means to focus its product design process based on the various requirements of customers resulting in high number of design changes. The objective of this research is to improve the design process of the electric car harness that effects the production scheduling by using Fault Tree Analysis (FTA) and Failure Mode and Effect Analysis (FMEA) as the main tools. FTA is employed for root cause analysis and FMEA is used to ranking a High Risk Priority Number (RPN) which is shows the priority of factors in the electric car harness that have high impact to the design of the electric car harness. After the implementation, the improvements are realized significantly since the number of design change is reduced from 0.26% to 0.08%.

Rethinking information handling: designing for information offload

DEFF Research Database (Denmark)

Hansen, Lone Koefoed; Pedersen, Peter Dalsgård; Eriksson, Eva

2005-01-01

This paper introduces information offload as a supplement way of responding to and designing for information. By presenting iFlush, a design concept aiming at providing the user with a possibility to offload information and then instantly dispose of it, the paper presents an approach towards desi...... designing for reflection and also serves as a critique towards information overload. Furthermore, the absence of reflection on the role played by HCI community in the constant augmenting of all spaces is addressed....

The risk perception and public information

International Nuclear Information System (INIS)

Choudens, H. de

2004-01-01

The problems in the field of risk to inform the public are the difference in the risk perception by the public, between the risk realities and the image the public makes in himself, the confidence of the public towards those that give information, the readability ( and then understanding) of the information, the easiness for the public to forget the information. Solutions can be summarized by the same way: durability of information actions, information elaborated by safety authority, inhabitants associations, risk generator, elected members, supports of information clear and understandable. (N.C.)

Information Design: A New Approach to Teaching Technical Writing Service Courses

Science.gov (United States)

McKee, Candie DeLane

2012-01-01

This study used a needs assessment, process analysis, process design, and textbook design to develop a new process and new textbook, based on Cargile-Cook's layered literacies, Quesenbery's five qualities of usability, and Carliner's information design theories, for use in technical writing service learning courses. The needs assessment was based…

Affect and Persuasion: Effects on Motivation for Information Processing.

Science.gov (United States)

Leach, Mark M; Stoltenberg, Cal D.

The relationship between mood and information processing, particularly when reviewing the Elaboration Likelihood Model of persuasion, lacks conclusive evidence. This study was designed to investigate the hypothesis that information processing would be greater for mood-topic congruence than non mood-topic congruence. Undergraduate students (N=216)…

A simulation framework for mapping risks in clinical processes: the case of in-patient transfers.

Science.gov (United States)

Dunn, Adam G; Ong, Mei-Sing; Westbrook, Johanna I; Magrabi, Farah; Coiera, Enrico; Wobcke, Wayne

2011-05-01

To model how individual violations in routine clinical processes cumulatively contribute to the risk of adverse events in hospital using an agent-based simulation framework. An agent-based simulation was designed to model the cascade of common violations that contribute to the risk of adverse events in routine clinical processes. Clinicians and the information systems that support them were represented as a group of interacting agents using data from direct observations. The model was calibrated using data from 101 patient transfers observed in a hospital and results were validated for one of two scenarios (a misidentification scenario and an infection control scenario). Repeated simulations using the calibrated model were undertaken to create a distribution of possible process outcomes. The likelihood of end-of-chain risk is the main outcome measure, reported for each of the two scenarios. The simulations demonstrate end-of-chain risks of 8% and 24% for the misidentification and infection control scenarios, respectively. Over 95% of the simulations in both scenarios are unique, indicating that the in-patient transfer process diverges from prescribed work practices in a variety of ways. The simulation allowed us to model the risk of adverse events in a clinical process, by generating the variety of possible work subject to violations, a novel prospective risk analysis method. The in-patient transfer process has a high proportion of unique trajectories, implying that risk mitigation may benefit from focusing on reducing complexity rather than augmenting the process with further rule-based protocols.

New ways of integrating material knowledge into the design process

DEFF Research Database (Denmark)

Højris, Anders; Nielsen, Louise Møller

2013-01-01

– based on technical performance, no longer apply. Accordingly the approach in this paper is to view information and knowledge about materials through the perspective of organizational memory and technology brokering. This paper is build upon two cases from the German based design studio: designaffairs...... libraries and thereby access to information on new material possibilities has also changed the way designers integrate knowledge about materials into the design process. This means that the traditional design process model, where the selection of materials takes place after the design of form and function...... in order to help clients to find the right material among hundreds of samples. Furthermore a number of material libraries have also been developed into online database, which provides detailed information about new material and makes the information accessible from almost everywhere. The access to material...

Integrated risk information system (IRIS)

Energy Technology Data Exchange (ETDEWEB)

Tuxen, L. [Environmental Protection Agency, Washington, DC (United States)

1990-12-31

The Integrated Risk Information System (IRIS) is an electronic information system developed by the US Environmental Protection Agency (EPA) containing information related to health risk assessment. IRIS is the Agency`s primary vehicle for communication of chronic health hazard information that represents Agency consensus following comprehensive review by intra-Agency work groups. The original purpose for developing IRIS was to provide guidance to EPA personnel in making risk management decisions. This original purpose for developing IRIS was to guidance to EPA personnel in making risk management decisions. This role has expanded and evolved with wider access and use of the system. IRIS contains chemical-specific information in summary format for approximately 500 chemicals. IRIS is available to the general public on the National Library of Medicine`s Toxicology Data Network (TOXNET) and on diskettes through the National Technical Information Service (NTIS).

Design tools for computer-generated display of information to operators

International Nuclear Information System (INIS)

O'Brien, J.F.; Cain, D.G.; Sun, B.K.H.

1985-01-01

More and more computers are being used to process and display information to operators who control nuclear power plants. Implementation of computer-generated displays in power plant control rooms represents a considerable design challenge for industry designers. Over the last several years, the EPRI has conducted research aimed at providing industry designers tools to meet this new design challenge. These tools provide guidance in defining more 'intelligent' information for plant control and in developing effective displays to communicate this information to the operators. (orig./HP)

Making sense of food risk information: the case of organic food

NARCIS (Netherlands)

Hilverda, Marie-Susanne Dieudonnée

2017-01-01

When individuals encounter new information about food issues, such as organic food risks, they have to make sense of this information. Sense-making is the process by which individuals give meaning to the world around them. How the process of sense-making is influenced by the online social

Design information verification

International Nuclear Information System (INIS)

Johnson, Shirley

2001-01-01

The paper provides the bases to complete a Design Information Questionnaire (DIQ) for a research reactor. The IAEA requirements for provision of design information for nuclear facility is described. The role of the provided information for the development of the safeguards approach and for planning of the IAEA's general inspection program for a specific facility is emphasized. Content and preparation of the IAEA DIQ by the State is presented

Mechanoluminescence assisting agile optimization of processing design on surgical epiphysis plates

Science.gov (United States)

Terasaki, Nao; Toyomasu, Takashi; Sonohata, Motoki

2018-04-01

We propose a novel method for agile optimization of processing design by visualization of mechanoluminescence. To demonstrate the effect of the new method, epiphysis plates were processed to form dots (diameters: 1 and 1.5 mm) and the mechanical information was evaluated. As a result, the appearance of new strain concentration was successfully visualized on the basis of mechanoluminescence, and complex mechanical information was instinctively understood by surgeons as the designers. In addition, it was clarified by mechanoluminescence analysis that small dots do not have serious mechanical effects such as strength reduction. Such detail mechanical information evaluated on the basis of mechanoluminescence was successfully applied to the judgement of the validity of the processing design. This clearly proves the effectiveness of the new methodology using mechanoluminescence for assisting agile optimization of the processing design.

Information Flow Through Stages of Complex Engineering Design Projects: A Dynamic Network Analysis Approach

DEFF Research Database (Denmark)

Parraguez, Pedro; Eppinger, Steven D.; Maier, Anja

2015-01-01

The pattern of information flow through the network of interdependent design activities is thought to be an important determinant of engineering design process results. A previously unexplored aspect of such patterns relates to the temporal dynamics of information transfer between activities...... design process and thus support theory-building toward the evolution of information flows through systems engineering stages. Implications include guidance on how to analyze and predict information flows as well as better planning of information flows in engineering design projects according...

PRA (Probabilistic Risk Assessments) Participation versus Validation

Science.gov (United States)

DeMott, Diana; Banke, Richard

2013-01-01

Probabilistic Risk Assessments (PRAs) are performed for projects or programs where the consequences of failure are highly undesirable. PRAs primarily address the level of risk those projects or programs posed during operations. PRAs are often developed after the design has been completed. Design and operational details used to develop models include approved and accepted design information regarding equipment, components, systems and failure data. This methodology basically validates the risk parameters of the project or system design. For high risk or high dollar projects, using PRA methodologies during the design process provides new opportunities to influence the design early in the project life cycle to identify, eliminate or mitigate potential risks. Identifying risk drivers before the design has been set allows the design engineers to understand the inherent risk of their current design and consider potential risk mitigation changes. This can become an iterative process where the PRA model can be used to determine if the mitigation technique is effective in reducing risk. This can result in more efficient and cost effective design changes. PRA methodology can be used to assess the risk of design alternatives and can demonstrate how major design changes or program modifications impact the overall program or project risk. PRA has been used for the last two decades to validate risk predictions and acceptability. Providing risk information which can positively influence final system and equipment design the PRA tool can also participate in design development, providing a safe and cost effective product.

Designing digital health information in a health literacy context

NARCIS (Netherlands)

Meppelink, C.S.

2016-01-01

Digital health information is widely available, but not everyone fully benefits due to limited health literacy. Until now, little was known about how health literacy influences information processing and how design features of digital health information can be used to create optimal health messages

Quality risk management of top spray fluidized bed process for antihypertensive drug formulation with control strategy engendered by Box-behnken experimental design space.

Science.gov (United States)

Mukharya, Amit; Patel, Paresh U; Shenoy, Dinesh; Chaudhary, Shivang

2013-01-01

Lacidipine (LCDP) is a very low soluble and highly biovariable calcium channel blocker used in the treatment of hypertension. To increase its apparent solubility and to reduce its biovariability, solid dispersion fluid bed processing technology was explored, as it produces highly dispersible granules with a characteristic porous structure that enhances dispersibility, wettability, blend uniformity (by dissolving and spraying a solution of actives), flow ability and compressibility of granules for tableting and reducing variability by uniform drug-binder solution distribution on carrier molecules. Main object of this quality risk management (QRM) study is to provide a sophisticated "robust and rugged" Fluidized Bed Process (FBP) for the preparation of LCDP tablets with desired quality (stability) and performance (dissolution) by quality by design (QbD) concept. THIS STUDY IS PRINCIPALLY FOCUSING ON THOROUGH MECHANISTIC UNDERSTANDING OF THE FBP BY WHICH IT IS DEVELOPED AND SCALED UP WITH A KNOWLEDGE OF THE CRITICAL RISKS INVOLVED IN MANUFACTURING PROCESS ANALYZED BY RISK ASSESSMENT TOOLS LIKE: Qualitative Initial Risk-based Matrix Analysis (IRMA) and Quantitative Failure Mode Effective Analysis (FMEA) to identify and rank parameters with potential to have an impact on In Process/Finished Product Critical Quality Attributes (IP/FP CQAs). These Critical Process Parameters (CPPs) were further refined by DoE and MVDA to develop design space with Real Time Release Testing (RTRT) that leads to implementation of a control strategy to achieve consistent finished product quality at lab scale itself to prevent possible product failure at larger manufacturing scale.

Virtual HRD and National Culture: An Information Processing Perspective

Science.gov (United States)

Chung, Chih-Hung; Angnakoon, Putthachat; Li, Jessica; Allen, Jeff

2016-01-01

Purpose: The purpose of this study is to provide researchers with a better understanding of the cultural impact on information processing in virtual learning environment. Design/methodology/approach: This study uses a causal loop diagram to depict the cultural impact on information processing in the virtual human resource development (VHRD)…

The process of Risk management for E-business

Directory of Open Access Journals (Sweden)

Erion Lekaj

2017-07-01

Full Text Available In the new Internet economy, risk management plays a critical role to protect the organization and its ability to perform their business mission, not just its IT assets. Risk management is the process of identifying risk, assessing risk, and taking steps to reduce risk to an acceptable level. The risk management is an important component of an IT security program. Information and communications technology management and IT security are responsible for ensuring that technology risks are managed appropriately. These risks originate from the deployment and use of IT assets in various ways, such as configuring systems incorrectly or gaining access to restricted soft ware.

Contested collaboration: A descriptive model of intergroup communication in information system design

DEFF Research Database (Denmark)

Sonnenwald, D.H.

1995-01-01

. The model describes design phases, roles, themes, and intergroup communication networks as they evolve throughout the design process and characterizes design as a process of ''contested collaboration.'' It is a first step towards a predictive design model that suggests strategies which may help participants......Many information system design situations today include users, designers, and developers who, with their own unique group and individual perspectives, need to interact so that they can come to a working understanding of how the information system being developed will coexist with and ideally...... support patterns of work activities, social groups, and personal beliefs. In these situations, design is fundamentally an interactive process that requires communication among users, designers, and developers. However, communication among these groups is often difficult although of paramount importance...

Risk management and the vulnerability assessment process of the United States Department of Energy

International Nuclear Information System (INIS)

Rivers, J.D.; Johnson, O.B.; Callahan, S.N.

2001-01-01

facility protection philosophy and strategy; and provides an estimate of resources required to accomplish improvements. Two major parts comprise a SSSP. Part I, the Safeguards and Security Management Report, contains information describing protection strategies, site/facility safeguards and security programs, approved deviations from policy, as well as plans and procedures designed to manage and maintain safeguards and security programs. Part II, the Vulnerability Assessment Report, reflects the results of Vulnerability Assessments; the validation of Vulnerability Assessment results by performance tests; currently existing protection programs; and any required corrective actions. The SSSP process can be a complex and resource intensive process. The responsibility for the steps in the current SSSP process can be directly attributable to the various Departmental organizations with an interest in safeguards and security risk management within the Department. Vulnerability Assessments form the basis for the Safeguards and Security Planning Process. The Vulnerability Assessments are performed by a process summarized in following six steps: 1) Threat and Target Identification; 2) Facility Characterization; 3) Protective Force and Systems Characterization; 4) Risk Determination; 5) Risk Validation and Verification; and 6) VA Approval and Concurrence. Threat and target identification are accomplished through the application of the DOE Design Basis Threat against targets prioritized based on Material Category, Attractiveness and Desirability. The facility characterization is a process that models a facility to determine material, system and protective force dispositions. The model relies heavily an the operations personnel, maintenance personnel and the protective force personnel for accurate information. The protective force and systems characterization determine, model and quantify the operations, capabilities and performance as applied against potential adversaries. The

Designs for Risk Evaluation and Management

Energy Technology Data Exchange (ETDEWEB)

2015-12-01

The Designs for Risk Evaluation and Management (DREAM) tool was developed as part of the effort to quantify the risk of geologic storage of carbon dioxide (CO₂) under the U.S. Department of Energy's National Risk Assessment Partnership (NRAP). DREAM is an optimization tool created to identify optimal monitoring schemes that minimize the time to first detection of CO₂ leakage from a subsurface storage formation. DREAM acts as a post-processer on user-provided output from subsurface leakage simulations. While DREAM was developed for CO₂ leakage scenarios, it is applicable to any subsurface leakage simulation of the same output format. The DREAM tool is comprised of three main components: (1) a Java wizard used to configure and execute the simulations, (2) a visualization tool to view the domain space and optimization results, and (3) a plotting tool used to analyze the results. A secondary Java application is provided to aid users in converting common American Standard Code for Information Interchange (ASCII) output data to the standard DREAM hierarchical data format (HDF5). DREAM employs a simulated annealing approach that searches the solution space by iteratively mutating potential monitoring schemes built of various configurations of monitoring locations and leak detection parameters. This approach has proven to be orders of magnitude faster than an exhaustive search of the entire solution space. The user's manual illustrates the program graphical user interface (GUI), describes the tool inputs, and includes an example application.

Design Processes

DEFF Research Database (Denmark)

Ovesen, Nis

2009-01-01

Inspiration for most research and optimisations on design processes still seem to focus within the narrow field of the traditional design practise. The focus in this study turns to associated businesses of the design professions in order to learn from their development processes. Through interviews...... and emerging production methods....

Food safety in the domestic environment: the effect of consumer risk information on human disease risks.

Science.gov (United States)

Nauta, Maarten J; Fischer, Arnout R H; van Asselt, Esther D; de Jong, Aarieke E I; Frewer, Lynn J; de Jonge, Rob

2008-02-01

The improvement of food safety in the domestic environment requires a transdisciplinary approach, involving interaction between both the social and natural sciences. This approach is applied in a study on risks associated with Campylobacter on broiler meat. First, some web-based information interventions were designed and tested on participant motivation and intentions to cook more safely. Based on these self-reported measures, the intervention supported by the emotion "disgust" was selected as the most promising information intervention. Its effect on microbial cross-contamination was tested by recruiting a set of participants who prepared a salad with chicken breast fillet carrying a known amount of tracer bacteria. The amount of tracer that could be recovered from the salad revealed the transfer and survival of Campylobacter and was used as a measure of hygiene. This was introduced into an existing risk model on Campylobacter in the Netherlands to assess the effect of the information intervention both at the level of exposure and the level of human disease risk. We showed that the information intervention supported by the emotion "disgust" alone had no measurable effect on the health risk. However, when a behavioral cue was embedded within the instruction for the salad preparation, the risk decreased sharply. It is shown that a transdisciplinary approach, involving research on risk perception, microbiology, and risk assessment, is successful in evaluating the efficacy of an information intervention in terms of human health risks. The approach offers a novel tool for science-based risk management in the area of food safety.

Improving the requirements process in Axiomatic Design Theory

DEFF Research Database (Denmark)

Thompson, Mary Kathryn

2013-01-01

This paper introduces a model to integrate the traditional requirements process into Axiomatic Design Theory and proposes a method to structure the requirements process. The method includes a requirements classification system to ensure that all requirements information can be included...... in the Axiomatic Design process, a stakeholder classification system to reduce the chances of excluding one or more key stakeholders, and a table to visualize the mapping between the stakeholders and their requirements....

Communicating genetic risk information for common disorders in the era of genomic medicine.

Science.gov (United States)

Lautenbach, Denise M; Christensen, Kurt D; Sparks, Jeffrey A; Green, Robert C

2013-01-01

Communicating genetic risk information in ways that maximize understanding and promote health is increasingly important given the rapidly expanding availability and capabilities of genomic technologies. A well-developed literature on risk communication in general provides guidance for best practices, including presentation of information in multiple formats, attention to framing effects, use of graphics, sensitivity to the way numbers are presented, parsimony of information, attentiveness to emotions, and interactivity as part of the communication process. Challenges to communicating genetic risk information include deciding how best to tailor it, streamlining the process, deciding what information to disclose, accepting that communications may have limited influence, and understanding the impact of context. Meeting these challenges has great potential for empowering individuals to adopt healthier lifestyles and improve public health, but will require multidisciplinary approaches and collaboration.

Contract Design: Risk Management and Evaluation

Directory of Open Access Journals (Sweden)

Axel C. Mühlbacher

2018-01-01

Full Text Available Introduction: Effective risk adjustment is an aspect that is more and more given weight on the background of competitive health insurance systems and vital healthcare systems. The risk structure of the providers plays a vital role in Pay for Performance. A prerequisite for optimal incentive-based service models is a (partial dependence of the agent’s returns on the provider’s gain level. Integrated care systems as well as accountable care organisations (ACOs in the US and similar concepts in other countries are advocated as an effective method of improving the performance of healthcare systems. These systems outline a payment and care delivery model that intends to tie provider reimbursements to predefined quality metrics. By this the total costs of care shall be reduced.  Methods: Little is known about the contractual design and the main challenges of delegating “accountability” to these new kinds of organisations and/or contracts. The costs of market utilisation are highly relevant for the conception of healthcare contracts; furthermore information asymmetries and contract-specific investments are an obstacle to the efficient operation of ACOs. A comprehensive literature review on methods of designing contracts in Integrated Care was conducted. The research question in this article focuses on how reimbursement strategies, evaluation of measures and methods of risk adjustment can best be integrated in healthcare contracting.  Results: Each integrated care contract includes challenges for both payers and providers without having sufficient empirical data on both sides. These challenges are clinical, administrative or financial nature. Risk adjusted contracts ensure that the reimbursement roughly matches the true costs resulting from the morbidity of a population. If reimbursement of care provider corresponds to the actual expenses for an individual/population the problem of risk selection is greatly reduced. The currently used methods

The opto-mechanical design process: from vision to reality

Science.gov (United States)

Kvamme, E. Todd; Stubbs, David M.; Jacoby, Michael S.

2017-08-01

The design process for an opto-mechanical sub-system is discussed from requirements development through test. The process begins with a proper mission understanding and the development of requirements for the system. Preliminary design activities are then discussed with iterative analysis and design work being shared between the design, thermal, and structural engineering personnel. Readiness for preliminary review and the path to a final design review are considered. The value of prototyping and risk mitigation testing is examined with a focus on when it makes sense to execute a prototype test program. System level margin is discussed in general terms, and the practice of trading margin in one area of performance to meet another area is reviewed. Requirements verification and validation is briefly considered. Testing and its relationship to requirements verification concludes the design process.

Enhancing the ecological risk assessment process.

Science.gov (United States)

Dale, Virginia H; Biddinger, Gregory R; Newman, Michael C; Oris, James T; Suter, Glenn W; Thompson, Timothy; Armitage, Thomas M; Meyer, Judith L; Allen-King, Richelle M; Burton, G Allen; Chapman, Peter M; Conquest, Loveday L; Fernandez, Ivan J; Landis, Wayne G; Master, Lawrence L; Mitsch, William J; Mueller, Thomas C; Rabeni, Charles F; Rodewald, Amanda D; Sanders, James G; van Heerden, Ivor L

2008-07-01

The Ecological Processes and Effects Committee of the US Environmental Protection Agency Science Advisory Board conducted a self-initiated study and convened a public workshop to characterize the state of the ecological risk assessment (ERA), with a view toward advancing the science and application of the process. That survey and analysis of ERA in decision making shows that such assessments have been most effective when clear management goals were included in the problem formulation; translated into information needs; and developed in collaboration with decision makers, assessors, scientists, and stakeholders. This process is best facilitated when risk managers, risk assessors, and stakeholders are engaged in an ongoing dialogue about problem formulation. Identification and acknowledgment of uncertainties that have the potential to profoundly affect the results and outcome of risk assessments also improves assessment effectiveness. Thus we suggest 1) through peer review of ERAs be conducted at the problem formulation stage and 2) the predictive power of risk-based decision making be expanded to reduce uncertainties through analytical and methodological approaches like life cycle analysis. Risk assessment and monitoring programs need better integration to reduce uncertainty and to evaluate risk management decision outcomes. Postdecision audit programs should be initiated to evaluate the environmental outcomes of risk-based decisions. In addition, a process should be developed to demonstrate how monitoring data can be used to reduce uncertainties. Ecological risk assessments should include the effects of chemical and nonchemical stressors at multiple levels of biological organization and spatial scale, and the extent and resolution of the pertinent scales and levels of organization should be explicitly considered during problem formulation. An approach to interpreting lines of evidence and weight of evidence is critically needed for complex assessments, and it would

Acceptable risk as a basis for design

International Nuclear Information System (INIS)

Vrijling, J.K.; Hengel, W. van; Houben, R.J.

1998-01-01

Historically, human civilisations have striven to protect themselves against natural and man-made hazards. The degree of protection is a matter of political choice. Today this choice should be expressed in terms of risk and acceptable probability of failure to form the basis of the probabilistic design of the protection. It is additionally argued that the choice for a certain technology and the connected risk is made in a cost-benefit framework. The benefits and the costs including risk are weighed in the decision process. A set of rules for the evaluation of risk is proposed and tested in cases. The set of rules leads to technical advice in a question that has to be decided politically

Information needs, acceptability of risk, trust, and reliance: The case of National Predictive Services customers

Science.gov (United States)

Patricia L. Winter; Heidi. Bigler-Cole

2010-01-01

Making complex risk-related decisions involves a degree of uncertainty. How that uncertainty is addressed or presented in reports or data tables can be tailored to meet information users’ needs and preferences. Involving the recipients of risk-related information in the design of information to be delivered (including the types of information delivered, format, and...

Information needs, acceptability of risk, trust, and reliance: the case of national predictive services customers

Science.gov (United States)

Patricia L. Winter; Heidi Bigler-Cole

2010-01-01

Making complex risk-related decisions involves a degree of uncertainty. How that uncertainty is addressed or presented in reports or data tables can be tailored to meet information users’ needs and preferences. Involving the recipients of risk-related information in the design of information to be delivered (including the types of information delivered, format, and...

Letter processing and font information during reading: beyond distinctiveness, where vision meets design.

Science.gov (United States)

Sanocki, Thomas; Dyson, Mary C

2012-01-01

Letter identification is a critical front end of the reading process. In general, conceptualizations of the identification process have emphasized arbitrary sets of distinctive features. However, a richer view of letter processing incorporates principles from the field of type design, including an emphasis on uniformities across letters within a font. The importance of uniformities is supported by a small body of research indicating that consistency of font increases letter identification efficiency. We review design concepts and the relevant literature, with the goal of stimulating further thinking about letter processing during reading.

Risk management in medical product development process using traditional FMEA and fuzzy linguistic approach: a case study

Science.gov (United States)

Kirkire, Milind Shrikant; Rane, Santosh B.; Jadhav, Jagdish Rajaram

2015-12-01

Medical product development (MPD) process is highly multidisciplinary in nature, which increases the complexity and the associated risks. Managing the risks during MPD process is very crucial. The objective of this research is to explore risks during MPD in a dental product manufacturing company and propose a model for risk mitigation during MPD process to minimize failure events. A case study approach is employed. The existing MPD process is mapped with five phases of the customized phase gate process. The activities during each phase of development and risks associated with each activity are identified and categorized based on the source of occurrence. The risks are analyzed using traditional Failure mode and effect analysis (FMEA) and fuzzy FMEA. The results of two methods when compared show that fuzzy approach avoids the duplication of RPNs and helps more to convert cognition of experts into information to get values of risk factors. The critical, moderate, low level and negligible risks are identified based on criticality; risk treatments and mitigation model are proposed. During initial phases of MPD, the risks are less severe, but as the process progresses the severity of risks goes on increasing. The MPD process should be critically designed and simulated to minimize the number of risk events and their severity. To successfully develop the products/devices within the manufacturing companies, the process risk management is very essential. A systematic approach to manage risks during MPD process will lead to the development of medical products with expected quality and reliability. This is the first research of its kind having focus on MPD process risks and its management. The methodology adopted in this paper will help the developers, managers and researchers to have a competitive edge over the other companies by managing the risks during the development process.

Human Integration Design Processes (HIDP)

Science.gov (United States)

Boyer, Jennifer

2014-01-01

The purpose of the Human Integration Design Processes (HIDP) document is to provide human-systems integration design processes, including methodologies and best practices that NASA has used to meet human systems and human rating requirements for developing crewed spacecraft. HIDP content is framed around human-centered design methodologies and processes in support of human-system integration requirements and human rating. NASA-STD-3001, Space Flight Human-System Standard, is a two-volume set of National Aeronautics and Space Administration (NASA) Agency-level standards established by the Office of the Chief Health and Medical Officer, directed at minimizing health and performance risks for flight crews in human space flight programs. Volume 1 of NASA-STD-3001, Crew Health, sets standards for fitness for duty, space flight permissible exposure limits, permissible outcome limits, levels of medical care, medical diagnosis, intervention, treatment and care, and countermeasures. Volume 2 of NASASTD- 3001, Human Factors, Habitability, and Environmental Health, focuses on human physical and cognitive capabilities and limitations and defines standards for spacecraft (including orbiters, habitats, and suits), internal environments, facilities, payloads, and related equipment, hardware, and software with which the crew interfaces during space operations. The NASA Procedural Requirements (NPR) 8705.2B, Human-Rating Requirements for Space Systems, specifies the Agency's human-rating processes, procedures, and requirements. The HIDP was written to share NASA's knowledge of processes directed toward achieving human certification of a spacecraft through implementation of human-systems integration requirements. Although the HIDP speaks directly to implementation of NASA-STD-3001 and NPR 8705.2B requirements, the human-centered design, evaluation, and design processes described in this document can be applied to any set of human-systems requirements and are independent of reference

Design and Analysis: Payroll of Accounting Information System

OpenAIRE

Suryanto, Suryanto

2011-01-01

Purpose of the research are to analyze, design, and recommended the payroll of accounting information system that support the internal control to solve the problem. Research methods used are book studies, field studies, and design studies. Fields studies done by survey and interview. The expected result are to give a review about the payroll of accounting information system in the ongoing business process of company and to solve all the weakness in the payroll system, so the company can use t...

Development and Validation of the Social Information Processing Application: A Web-Based Measure of Social Information Processing Patterns in Elementary School-Age Boys

Science.gov (United States)

Kupersmidt, Janis B.; Stelter, Rebecca; Dodge, Kenneth A.

2011-01-01

The purpose of this study was to evaluate the psychometric properties of an audio computer-assisted self-interviewing Web-based software application called the Social Information Processing Application (SIP-AP) that was designed to assess social information processing skills in boys in RD through 5th grades. This study included a racially and…

Designing a framework of intelligent information processing for dentistry administration data.

Science.gov (United States)

Amiri, N; Matthews, D C; Gao, Q

2005-07-01

This study was designed to test a cumulative view of current data in the clinical database at the Faculty of Dentistry, Dalhousie University. We planned to examine associations among demographic factors and treatments. Three tables were selected from the database of the faculty: patient, treatment and procedures. All fields and record numbers in each table were documented. Data was explored using SQL server and Visual Basic and then cleaned by removing incongruent fields. After transformation, a data warehouse was created. This was imported to SQL analysis services manager to create an OLAP (Online Analytic Process) cube. The multidimensional model used for access to data was created using a star schema. Treatment count was the measurement variable. Five dimensions--date, postal code, gender, age group and treatment categories--were used to detect associations. Another data warehouse of 8 tables (international tooth code # 1-8) was created and imported to SAS enterprise miner to complete data mining. Association nodes were used for each table to find sequential associations and minimum criteria were set to 2% of cases. Findings of this study confirmed most assumptions of treatment planning procedures. There were some small unexpected patterns of clinical interest. Further developments are recommended to create predictive models. Recent improvements in information technology offer numerous advantages for conversion of raw data from faculty databases to information and subsequently to knowledge. This knowledge can be used by decision makers, managers, and researchers to answer clinical questions, affect policy change and determine future research needs.

The control, at the design stage, of risks related to buildings management over time

Directory of Open Access Journals (Sweden)

Claudio Martani

2013-10-01

Full Text Available In the present paper an apparatus of tools and methods is presented to evaluate, at the design stage, the risks over a set of objectives through buildings lifetime. To this purpose a tool is first presented to relate technological requirements of each technical elements to the pertinent maintenance interventions. Then a process is also proposed to estimate the risks on user requirements runningMonte Carlo simulations. The risk management process proposed in the present work aims to support designers and promoters in making predictions on the outcomes of long, not standardized, multivariable dependent processes – as the building process is – in order to indicate the attitude of a designed building to meet a framework of important objectives through its lifetime.

Risk informed In-service Inspection

International Nuclear Information System (INIS)

Corak, Z.

2003-01-01

Safety of nuclear power plants is one of the most important conditions for their acceptance. Safety is being acheived by numerous methods and techniques in phase of design, manufacturing and maintenance of the nuclear power plants. In-service Inspection (ISI) has a significant role in avoidances of failure in components of nuclear power plants just the same as in assurance of their integrity. Non-destructive examinations are performed periodically in accordance with 10 CFR 50 50.55a and ASME Boiler and Pressure Vessel Code section XI which is referenced by 10 CFR 50.55a. Nondestructive examinations provide information about a current condition of equipment at nuclear power plants and about any damage, defect or degradation mechanism. A lot of effort is often spent in situations in which the probability of failure and their effects on safety have a very low impact. Practical experience shows that failures can often occur at locations where the inspection has never been performed. Costs and expenses of in-service inspections are very high. Therefore, the accent has to be on locations with significant risk to safety. Many years of nuclear power plants' operation and maintenance have resulted in a more broad knowledge of degradation mechanism and the most susceptible locations and huge databases of different nuclear power plants' components. U.S. Nuclear Regulatory Commission (NRC) and the nuclear industry have recognized that probabilistic risk assessment (PRA) has developed and changed to be more useful in improvement of traditional engineering approaches in nuclear power plants regulation. After the publication of its policy statement on the use of PRA in nuclear regulatory activities, the Commission ordered the NRC staff to develop a regulatory framework that incorporated risk insights. The American Society of Mechanical Engineers (ASME) initiated Code Case N-560, N-577, and N-578 that address the importance of categorization and inspection of piping using risk

Steps in Designing Queue and Interview Process using Information System: A Case of Re-registration of New Students in Universitas Negeri Makassar

Directory of Open Access Journals (Sweden)

Ansari Saleh Ahmar

2016-06-01

Full Text Available Universitas Negeri Makassar (UNM have a number of prospective students is quite a lot. Based on data released by the BAPSI UNM (2015 that the data student candidates of UNM who passed the selection with SNMPTN SBMPTN selection as 3,791 people. If the prospective graduate students interviewed are normally it will take a long time and will certainly make students uncomfortable. Therefore it is necessary design an information systems to solving this problem. This research aim to develop an information system to facilitate the process queue. The method used in this research is to use the three stages in the Software Development Life Cycle method namely Initiation Phase, Development/Acquisition Phase, and Implementation Phase. This information system development using PHP and CodeIgniter as a its framework. This design results will be obtained an queues and interviews information system that can be used to manage the queue and interview data. By implementing this system, it potentially reduce time to wait and the process of managing results of interviews can be obtained directly without a process of inputting interview repeat if done manually.

Experiences gained in implementing a broad-based risk-informed application

International Nuclear Information System (INIS)

Schinzel, G.E.

2004-01-01

The South Texas Project was granted a first-of-kind exemption from special treatment requirements contained in 10-CFR Parts 21, 50, and 100 in August 2001. Since that time, South Texas has pursued a cautious, deliberate approach to implement these risk-informed exemption allowances. Over the past two years, South Texas has gained a unique insight into the challenges and benefits that exist in pursuing a broad-based risk-informed application. The American nuclear industry is currently pursuing similar capabilities through proposed rule 10-CFR 50.69 which is scheduled for NRC final review and approval in the July, 2004 time-frame. This proposed rule closely resembles the approach taken by South Texas in the exemption process and the allowances granted. For nuclear utilities that wish to pursue a similar broad-based risk-informed application, a well-conceived strategic approach is needed to prioritize the implementation activities as well as engage stake-holders in the implementation process. Cultural and communication challenges exist which must be addressed and effectively overcome. The goal of this paper is to communicate these challenges to the attendees, inform attendees of the safety and economic benefits to be recognized through this risk-informed approach, and to provide insight into continuing application opportunities that were not readily apparent when the broad-based exemption was originally conceived. This paper and presentation will be beneficial for both domestic and international attendees, as well as for personnel with utility or regulatory backgrounds. (author)

Cerebro-cerebellar interactions underlying temporal information processing.

Science.gov (United States)

Aso, Kenji; Hanakawa, Takashi; Aso, Toshihiko; Fukuyama, Hidenao

2010-12-01

The neural basis of temporal information processing remains unclear, but it is proposed that the cerebellum plays an important role through its internal clock or feed-forward computation functions. In this study, fMRI was used to investigate the brain networks engaged in perceptual and motor aspects of subsecond temporal processing without accompanying coprocessing of spatial information. Direct comparison between perceptual and motor aspects of time processing was made with a categorical-design analysis. The right lateral cerebellum (lobule VI) was active during a time discrimination task, whereas the left cerebellar lobule VI was activated during a timed movement generation task. These findings were consistent with the idea that the cerebellum contributed to subsecond time processing in both perceptual and motor aspects. The feed-forward computational theory of the cerebellum predicted increased cerebro-cerebellar interactions during time information processing. In fact, a psychophysiological interaction analysis identified the supplementary motor and dorsal premotor areas, which had a significant functional connectivity with the right cerebellar region during a time discrimination task and with the left lateral cerebellum during a timed movement generation task. The involvement of cerebro-cerebellar interactions may provide supportive evidence that temporal information processing relies on the simulation of timing information through feed-forward computation in the cerebellum.

Information risk management a practitioner's guide

CERN Document Server

Sutton, David

2014-01-01

Information risk management (IRM) is about identifying, assessing and prioritising risks to keep information secure and available. This accessible book provides practical guidance to the principles and development of a strategic approach to an IRM programme. The only textbook for the BCS Practitioner Certificate in Information Risk Management.

Mental Status Documentation: Information Quality and Data Processes.

Science.gov (United States)

Weir, Charlene; Gibson, Bryan; Taft, Teresa; Slager, Stacey; Lewis, Lacey; Staggers, Nancy

2016-01-01

Delirium is a fluctuating disturbance of cognition and/or consciousness associated with poor outcomes. Caring for patients with delirium requires integration of disparate information across clinicians, settings and time. The goal of this project was to characterize the information processes involved in nurses' assessment, documentation, decisionmaking and communication regarding patients' mental status in the inpatient setting. VA nurse managers of medical wards (n=18) were systematically selected across the US. A semi-structured telephone interview focused on current assessment, documentation, and communication processes, as well as clinical and administrative decision-making was conducted, audio-recorded and transcribed. A thematic analytic approach was used. Five themes emerged: 1) Fuzzy Concepts, 2) Grey Data, 3) Process Variability 4) Context is Critical and 5) Goal Conflict. This project describes the vague and variable information processes related to delirium and mental status that undermine effective risk, prevention, identification, communication and mitigation of harm.

Technical specifications review of nuclear power plants: a risk-informed evaluation

International Nuclear Information System (INIS)

Saldanha, Pedro Luiz da Cruz; Sousa, Anna Leticia; Frutuoso e Melo, Paulo Fernando Ferreira; Duarte, Juliana Pacheco

2012-01-01

The use of risk information by a regulatory body as part of an integrated decision making process addresses the way in which risk information is being used as part of an integrated process in making decisions about safety issues at nuclear plants – commonly referred to as risk-informed decision making. The risk-informed approach aims to integrate in a systematic manner quantitative and qualitative, deterministic and probabilistic safety considerations to obtain a balanced decision. Probabilistic Safety Assessment (PSA) is a methodology that can be applied to provide a structured analysis process to evaluate the frequency and consequences of accidents scenarios in nuclear power plants. Technical Specifications (TS) are specifications regarding the characteristics of nuclear power plants (variables, systems or components) of overriding importance to nuclear safety and radiation protection, which is an integral part of plant operation authorization. Limiting Conditions of Operation (LCO) are the minimum levels of performance or capacity or operating system components required for the safe operation of nuclear plants, as defined in technical specifications. The Maintenance Rule (MR) is a requirement established by the U. S. Nuclear Regulatory Commission (NRC) to check the effectiveness of maintenance carried out in nuclear plants, and plant configuration control. The control of plant configuration is necessary to verify the impact of the maintenance of a safety device out of service on plant safety. The Electric Power Research Institute (EPRI) has assessed the role of probabilistic safety analysis in the regulation of nuclear power plants with the following objectives: a) to provide utilities with an approach for developing and implementing nuclear power station risk-managed technical specification programs; and b) to complement and supplement existing successful configuration risk management applications such as MR. This paper focuses on the evaluation of EPRI

Using a Design Science Perspective to Understand a Complex Design-Based Research Process

DEFF Research Database (Denmark)

Bækgaard, Lars

2012-01-01

The purpose of the paper is to demonstrate how a design science perspective can be used to describe and understand a set of related design-based research processes. We describe and analyze a case study in a manner that is inspired by design science. The case study involves the design of modeling......-based research processes. And we argue that a design science perspective may be useful for both researchers and practitioners....... tools and the redesign of an information service in a library. We use a set of guidelines from a design science perspective to organize the description and analysis of the case study. By doing this we demonstrate the usefulness of design science as an analytical tool for understanding related design...

Information security risk management and incompatible parts of organization

Energy Technology Data Exchange (ETDEWEB)

Talabeigi, E.; Naeeini, S.G.J.

2016-07-01

Purpose: we prepared a questionnaire to evaluate Incompatible parts and also risk management in University of Science and Technology E-Learning Center and studying the Incompatible parts impacts on utility of organization. Design/methodology/approach: By using coalitional game theory we present a new model to recognize the degrees of incompatibility among independent divisions of an organization with dependent security assets. Based on positive and negative interdependencies in the parts, the model provides how the organization can decrease the security risks through non-cooperation rather than cooperation. we implement the proposed model of this paper by analyzing the data which have been provided by questionnaires from different three managers' ideas of Iran University of Science and Technology E-Learning Center located in Iran University of Science and Technology, Tehran, Iran. Findings: In general, by collecting data and analyzing them, the survey showed that Incompatible parts of organizations have negative impacts on utility of organization risk management process. Furthermore, it adds values to other organizations and provides the best practices in planning, developing, implementing and monitoring risk management in organizations. Research limitations/implications: Since Information security and also Risk Management are still areas which need to improve in some Iranian universities, we couldn’t consider them in our analysis. On the other hand, due to questionnaire limitation, the study’s sample size is 1. This size may be considered large for our statistical analysis. Originality/value: The main contribution of this paper is to propose a model for non-cooperation among a number of divisions in a organization and using risk management factors.

Information security risk management and incompatible parts of organization

International Nuclear Information System (INIS)

Talabeigi, E.; Naeeini, S.G.J.

2016-01-01

Purpose: we prepared a questionnaire to evaluate Incompatible parts and also risk management in University of Science and Technology E-Learning Center and studying the Incompatible parts impacts on utility of organization. Design/methodology/approach: By using coalitional game theory we present a new model to recognize the degrees of incompatibility among independent divisions of an organization with dependent security assets. Based on positive and negative interdependencies in the parts, the model provides how the organization can decrease the security risks through non-cooperation rather than cooperation. we implement the proposed model of this paper by analyzing the data which have been provided by questionnaires from different three managers' ideas of Iran University of Science and Technology E-Learning Center located in Iran University of Science and Technology, Tehran, Iran. Findings: In general, by collecting data and analyzing them, the survey showed that Incompatible parts of organizations have negative impacts on utility of organization risk management process. Furthermore, it adds values to other organizations and provides the best practices in planning, developing, implementing and monitoring risk management in organizations. Research limitations/implications: Since Information security and also Risk Management are still areas which need to improve in some Iranian universities, we couldn’t consider them in our analysis. On the other hand, due to questionnaire limitation, the study’s sample size is 1. This size may be considered large for our statistical analysis. Originality/value: The main contribution of this paper is to propose a model for non-cooperation among a number of divisions in a organization and using risk management factors.

Information Architecture the Design of Digital Information Spaces

CERN Document Server

Ding, Wei

2009-01-01

Information Architecture is about organizing and simplifying information, designing and integrating information spaces/systems, and creating ways for people to find and interact with information content. Its goal is to help people understand and manage information and make right decisions accordingly. In the ever-changing social, organizational and technological contexts, Information Architects not only design individual information spaces (e.g., individual websites, software applications, and mobile devices), but also tackle strategic aggregation and integration of multiple information spaces

Information security governance: a risk assessment approach to health information systems protection.

Science.gov (United States)

Williams, Patricia A H

2013-01-01

It is no small task to manage the protection of healthcare data and healthcare information systems. In an environment that is demanding adaptation to change for all information collection, storage and retrieval systems, including those for of e-health and information systems, it is imperative that good information security governance is in place. This includes understanding and meeting legislative and regulatory requirements. This chapter provides three models to educate and guide organisations in this complex area, and to simplify the process of information security governance and ensure appropriate and effective measures are put in place. The approach is risk based, adapted and contextualized for healthcare. In addition, specific considerations of the impact of cloud services, secondary use of data, big data and mobile health are discussed.

Integrating risk management into the baselining process

International Nuclear Information System (INIS)

Jennett, N.; Tonkinson, A.

1994-01-01

These processes work together in building the project (comprised of the technical, schedule, and cost baselines) against which performance is measured and changes to the scope, schedule and cost of a project are managed and controlled. Risk analysis is often performed as the final element of the scheduling or estimating processes, a precursor to establishing cost and schedule contingency. However, best business practices dictate that information that may be crucial to the success of a project be analyzed and incorporated into project planning as soon as it is available and usable. The purpose or risk management is not to eliminate risk. Neither is it intended to suggest wholesale re-estimating and re-scheduling of a project. Rather, the intent is to make provisions to reduce and control the schedule and/or cost ramifications of risk by anticipating events and conditions that cannot be reliably planned for and which have the potential to negatively impact accomplishment of the technical objectives and requirements of the project

Risk informed decisions and regulations - STUK's policy and current practice

International Nuclear Information System (INIS)

Julin, A.; Niemalae, I.; Virolainen, R.

2001-01-01

Consideration of severe accidents beyond the traditional design basis, including full core melt accidents, has become an important ingredient of regulatory process in Finland. Accordingly, plant-specific level-1 and level-2 PSA studies are a regulatory requirement. These studies are being used in a living fashion both at the utilities and STUK. Plant specific living PSAs have been completed for all operating Finnish plants, including internal initiators, fires, flooding, harsh weather conditions seismic events for operation mode and internal events for low power mode. Many specific applications of the Living PSA have already been introduced but some are still waiting for further development such as Risk Informed ISI, IST and Tech Specs. Examples of safety issues, for which the PSA insights give an improved basis for decisions, are approvals of plant modifications and resolution of testing, inspection and maintenance strategies. PSA insights are also of value in assessing meaningfulness of requirements which are based on traditional engineering judgement but do not form an essential part of defence-in-depth concept. Examples of such requirements are details of safety classification and many Technical Specification requirements. STUK has recently conducted a pilot study on risk-informed ISI. The aim of the study was to explore how the plant specific PSAs could best be used for assessment of the ISI programmes. This paper discusses the findings obtained during the pilot study on risk-informed ISI of pipings. The study produced essential insights of the applied method. Furthermore, the study gave guidance to extract items for further development. Based on these results and overall experience the general suitability of the method for further application is evaluated. (author)

Adoption of Building Information Modelling in project planning risk management

Science.gov (United States)

Mering, M. M.; Aminudin, E.; Chai, C. S.; Zakaria, R.; Tan, C. S.; Lee, Y. Y.; Redzuan, A. A.

2017-11-01

An efficient and effective risk management required a systematic and proper methodology besides knowledge and experience. However, if the risk management is not discussed from the starting of the project, this duty is notably complicated and no longer efficient. This paper presents the adoption of Building Information Modelling (BIM) in project planning risk management. The objectives is to identify the traditional risk management practices and its function, besides, determine the best function of BIM in risk management and investigating the efficiency of adopting BIM-based risk management during the project planning phase. In order to obtain data, a quantitative approach is adopted in this research. Based on data analysis, the lack of compliance with project requirements and failure to recognise risk and develop responses to opportunity are the risks occurred when traditional risk management is implemented. When using BIM in project planning, it works as the tracking of cost control and cash flow give impact on the project cycle to be completed on time. 5D cost estimation or cash flow modeling benefit risk management in planning, controlling and managing budget and cost reasonably. There were two factors that mostly benefit a BIM-based technology which were formwork plan with integrated fall plan and design for safety model check. By adopting risk management, potential risks linked with a project and acknowledging to those risks can be identified to reduce them to an acceptable extent. This means recognizing potential risks and avoiding threat by reducing their negative effects. The BIM-based risk management can enhance the planning process of construction projects. It benefits the construction players in various aspects. It is important to know the application of BIM-based risk management as it can be a lesson learnt to others to implement BIM and increase the quality of the project.

Issues, challenges, and approaches for risk-informed decommissioning in the United States

International Nuclear Information System (INIS)

Orlando, D.A.; Johnson, R.L.

2005-01-01

'lessons learned' in implementing US-NRC's risk-informed approach to decommissioning; and ensuring that the public understands that risk-informed does not mean that safety is reduced, are all challenges that the US-NRC staff will need to address as they implement the US-NRC risk-informed decommissioning program. Finally, a successful risk-informed decommissioning program requires that both the staff and licensees commit to constantly review their processes, approaches, and regulatory decisions to ensure that they remain risk-informed. The US-NRC has faced numerous challenges in the development of its decommissioning program, from the determination of the appropriate level of cleanup to ensuring that current activities do not adversely impact future decommissioning. However, the principal regulatory challenges associated with risk-informing a regulatory program for decommissioning is to maintain an acceptable level of safety while improving effectiveness, efficiency, and realism in agency decisions, practices, and processes, and reducing unnecessary regulatory burden on licensees. (authors)

Risk-taking related to drug use: an application of the shift-to-risk design.

Science.gov (United States)

Deren, S; Des Jarlais, D C

1977-01-01

The utility of the shift-to-risk design for studying the influence of peer groups on drug taking was investigated. Two studies using this design with drug content were conducted, varying the level of information provided about a drug. Subjects were from two college classes consisting of 26 and 28 students. Results indicated that the specification of possible harmful drug effects which are somewhat minimal lead to a significantly greater willingness to recommend trying the drug. In addition, a tendency for a shift-to-caution was found. It was concluded that the shift-to-risk designwas useful for studying decision-making regarding drug use, and that both users and nonusers of drugs should be included in future research.

Communicating risk information and warnings

Science.gov (United States)

Mileti, D. S.

1990-01-01

Major advances have occurred over the last 20 years about how to effectively communicate risk information and warnings to the public. These lessons have been hard won. Knowledge has mounted on the finding from social scientific studies of risk communication failures, successes and those which fell somewhere in between. Moreover, the last 2 decades have borne witness to the brith, cultivation, and blossoming of information sharing between those physical scientists who discover new information about risk and those communcation scientists who trace its diffusion and then measure pbulic reaction. 

Risk Factors, Processes and Risk Management within a Public Health Context

Directory of Open Access Journals (Sweden)

Tamás Szentes

2016-06-01

Full Text Available Besides clinical medicine, which is in the process of constant and fast development, the focus is increasingly on public health services, which should be well prepared for reducing or keeping under control the dangers induced by the growing social burden of disease. Continuous risk management is represented by these services that are specially designed to prevent diseases and health damages. The grounds for the planning and implementation of public health services are constituted by risk factor management and assessment by means of adopting a unified approach.

ECO DESIGN IN DESIGN PROCESS

Directory of Open Access Journals (Sweden)

PRALEA Jeni

2014-05-01

Full Text Available Eco-design is a new domain, required by the new trends and existing concerns worldwide, generated by the necessity of adopting new design principles. New design principles require the designer to provide a friendly relationship between concept created, environment and consume. This "friendly" relationship should be valid both at present and in the future, generating new opportunities for product, product components or materials from which it was made. Awareness, by the designer, the importance of this new trend, permits the establishment of concepts that have as their objective the protection of present values and ensuring the legacy of future generations. Ecodesig, by its principles, is involved in the design process, from early stage, the stage of product design. Priority objective of the designers will consist in reducing the negative effects on the environment through the entire life cycle and after it is taken out of use. The main aspects of the eco-design will consider extending product exploitation, make better use of materials, reduction of emission of waste. The design process in the "eco"domein must be started by selecting the function of the concept, materials and technological processes, causing the shape of macro and micro geometric of the product through an analysis that involves optimizing and streamlining the product. This paper presents the design process of a cross-sports footwear concept, built on the basis of the principles of ecodesign

[Postdonation information: the French fourth hemovigilance sub-process].

Science.gov (United States)

Py, J-Y; Sandid, I; Jbilou, S; Dupuis, M; Adda, R; Narbey, D; Djoudi, R

2014-11-01

Postdonation information is the knowledge of information about the donor or his donation, occurring after it, which challenges quality or safety of the blood products stemming from this or other donations. Classical hemovigilance sub-processes concerning donors or recipients adverse events do not cover this topic. France is just about to make it official as a fourth sub-process. Less formal management of postdonation information is already set up for more than ten years. French data of the year 2013 are presented, including the regional notification level and the national reporting one. A significant level of heterogeneity is observed as for other hemovigilance sub-processes. It is mainly due to subjective rather than objective differences in risk appreciation. A real consensual work is expected about it in the future. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Obsolescence Risk Assessment Process Best Practice

Science.gov (United States)

Romero Rojo, F. J.; Roy, R.; Kelly, S.

2012-05-01

A component becomes obsolete when it is no longer available from the original manufacturer to the original specification. In long-lifecycle projects, obsolescence has become a major problem as it prevents the maintenance of the system. This is the reason why obsolescence management is now an essential part of the product support activities in sectors such as defence, aerospace, nuclear and railway; where systems need to be supported for several decades. The obsolescence risk assessment for the bill of materials (BoM) is a paramount activity in order to manage obsolescence proactively and cost-effectively. This is the reason why it was necessary to undertake a benchmarking study to develop best practice in this process. A total of 22 obsolescence experts from 13 different organisations/projects from across UK and USA have participated in this study. Their current processes and experience have been taken into account in the development of the best practice process for obsolescence risk assessment. The key factors that have to be analysed in the risk assessment process for each component in the BoM are: number of manufacturers, years to end of life, stock available, consumption rate and operational impact criticality. For the very high risk components, a more detailed analysis is required to inform the decisions regarding the most suitable mitigation strategies. On the contrary, for the low risk components, a fully proactive approach is neither appropriate nor cost effective. Therefore, it is advised for these components that obsolescence issues are dealt with reactively. This process has been validated using case studies with several experts from industry and is currently being implemented by the UK Ministry of Defence as technical guidance within the JSP 886 Volume 7 Part 8.13 standards.

Obsolescence Risk Assessment Process Best Practice

International Nuclear Information System (INIS)

Rojo, F J Romero; Roy, R; Kelly, S

2012-01-01

A component becomes obsolete when it is no longer available from the original manufacturer to the original specification. In long-lifecycle projects, obsolescence has become a major problem as it prevents the maintenance of the system. This is the reason why obsolescence management is now an essential part of the product support activities in sectors such as defence, aerospace, nuclear and railway; where systems need to be supported for several decades. The obsolescence risk assessment for the bill of materials (BoM) is a paramount activity in order to manage obsolescence proactively and cost-effectively. This is the reason why it was necessary to undertake a benchmarking study to develop best practice in this process. A total of 22 obsolescence experts from 13 different organisations/projects from across UK and USA have participated in this study. Their current processes and experience have been taken into account in the development of the best practice process for obsolescence risk assessment. The key factors that have to be analysed in the risk assessment process for each component in the BoM are: number of manufacturers, years to end of life, stock available, consumption rate and operational impact criticality. For the very high risk components, a more detailed analysis is required to inform the decisions regarding the most suitable mitigation strategies. On the contrary, for the low risk components, a fully proactive approach is neither appropriate nor cost effective. Therefore, it is advised for these components that obsolescence issues are dealt with reactively. This process has been validated using case studies with several experts from industry and is currently being implemented by the UK Ministry of Defence as technical guidance within the JSP 886 Volume 7 Part 8.13 standards.

Design and information requirements for travel and tourism needs on scenic byways.

Science.gov (United States)

1994-01-01

The purpose of this study was to develop a system design and information evaluation process that could be used to review proposed or designated scenic byways. The process was intended to ensure that the geometric and traffic design of these roads wer...

Serious and actionable risks, plus disclosure: Investigating an alternative approach for presenting risk information in prescription drug television advertisements.

Science.gov (United States)

Betts, Kevin R; Boudewyns, Vanessa; Aikin, Kathryn J; Squire, Claudia; Dolina, Suzanne; Hayes, Jennifer J; Southwell, Brian G

2017-08-02

Broadcast direct-to-consumer (DTC) prescription drug ads that present product claims are required to also present the product's major risks. Debate exists regarding how much information should be included in these major risk statements. Some argue that such statements expose people to unnecessary amounts of information, while others argue that they leave out important information. Examine the impact of type of risk statement (unedited versus serious and actionable risks only) and a disclosure indicating that not all risks are presented on consumers' ability to remember the important risks and benefits of a drug following exposure to a DTC television advertisement (ad). Risk and benefit perceptions, ad-prompted actions, recognition of the disclosure statement, and evaluations of both the disclosure and risk statement were also examined. A web-based experiment was conducted in which US adults who self-reported as having depression (N = 500), insomnia (N = 500), or high cholesterol (N = 500) were randomly assigned to view one of four versions of the television ad, and then complete a questionnaire. The type of risk statement had a significant effect on risk recall and recognition, benefit recognition, perceived risk severity (depression condition only), and perceived benefit magnitude (high cholesterol condition only). Disclosure recognition (using bias-corrected scores) ranged from 63% to 70% across the three illness samples. The revised risk statement improved overall processing of the television ad, as evidenced by improved risk recall and recognition and improved benefit recognition. Further, the presence of the disclosure did not adversely affect consumers' processing of drug risk and benefit information. Therefore, limiting the risks presented in DTC television ads and including a disclosure alerting consumers that not all risks are presented may be an effective strategy for communicating product risks. Published by Elsevier Inc.

Barriers in using cardiometabolic risk information among consumers with low health literacy.

Science.gov (United States)

Damman, Olga C; Bogaerts, Nina M M; van Dongen, Diana; Timmermans, Danielle R M

2016-02-01

To identify the barriers from the perspective of consumers with low health literacy in using risk information as provided in cardiometabolic risk assessments. A qualitative thematic approach using cognitive interviews was employed. We performed interviews with 23 people with low health literacy/health numeracy, who were recruited through (1) several organisations and snowball sampling and (2) an online access panel. Participants completed the risk test of the Dutch national cardiometabolic risk assessment and viewed the personalized information about their risk. They were asked to answer probing questions about different parts of the information. The qualitative data were analysed by identifying main themes related to barriers in using the information, using a descriptive thematic approach. The four main themes identified were as follows: (1) People did not fully accept the risk message, partly because numerical information had ambiguous meaning; (2) people lacked an adequate framework for understanding their risk; (3) the purpose and setting of the risk assessment was unclear; and (4) current information tells nothing new: A need for more specific risk information. The main barriers were that the current presentation seemed to provoke undervaluation of the risk number and that texts throughout the test, for example about cardiometabolic diseases, did not match people's existing knowledge, failing to provide an adequate framework for understanding cardiometabolic risk. Our findings have implications for the design of disease risk information, for example that alternative forms of communication should be explored that provide more intuitive meaning of the risk in terms of good versus bad. What is already known on this subject? Online disease risk assessments have become widely available internationally. People with low SES and health literacy tend to participate less in health screening. Risk information is difficult to understand, yet little research has been

Neural Correlates of Feedback Processing in Decision Making under Risk

Directory of Open Access Journals (Sweden)

Beate eSchuermann

2012-07-01

Full Text Available Introduction. Event-related brain potentials (ERP provide important information about the sensitivity of the brain to process varying risks. The aim of the present study was to determine how different risk levels are reflected in decision-related ERPs, namely the feedback-related negativity (FRN and the P300. Material and Methods. 20 participants conducted a probabilistic two-choice gambling task while an electroencephalogram was recorded. Choices were provided between a low-risk option yielding low rewards and low losses and a high-risk option yielding high rewards and high losses. While options differed in expected risks, they were equal in expected values and in feedback probabilities. Results. At the behavioral level, participants were generally risk-averse but modulated their risk-taking behavior according to reward history. An early positivity (P200 was enhanced on negative feedbacks in high-risk compared to low-risk options. With regard to the FRN, there were significant amplitude differences between positive and negative feedbacks in high-risk options, but not in low-risk options. While the FRN on negative feedbacks did not vary with decision riskiness, reduced amplitudes were found for positive feedbacks in high-risk relative to low-risk choices. P300 amplitudes were larger in high-risk decisions, and in an additive way, after negative compared to positive feedback. Discussion. The present study revealed significant influences of risk and valence processing on ERPs. FRN findings suggest that the reward prediction error signal is increased after high-risk decisions. The increased P200 on negative feedback in risky decisions suggests that large negative prediction errors are processed as early as in the P200 time range. The later P300 amplitude is sensitive to feedback valence as well as to the risk of a decision. Thus, the P300 carries additional information for reward processing, mainly the enhanced motivational significance of risky

A risk-informed perspective on deterministic safety analysis of nuclear power plants

International Nuclear Information System (INIS)

Wan, P.T.

2009-01-01

In this work, the deterministic safety analysis (DSA) approach to nuclear safety is examined from a risk-informed perspective. One objective of safety analysis of a nuclear power plant is to demonstrate via analysis that the risks to the public from events or accidents that are within the design basis of the power plant are within acceptable levels with a high degree of assurance. This nuclear safety analysis objective can be translated into two requirements on the risk estimates of design basis events or accidents: the nominal risk estimate to the public must be shown to be within acceptable levels, and the uncertainty in the risk estimates must be shown to be small on an absolute or relative basis. The DSA approach combined with the defense-in-depth (DID) principle is a simplified safety analysis approach that attempts to achieve the above safety analysis objective in the face of potentially large uncertainties in the risk estimates of a nuclear power plant by treating the various uncertainty contributors using a stylized conservative binary (yes-no) approach, and applying multiple overlapping physical barriers and defense levels to protect against the release of radioactivity from the reactor. It is shown that by focusing on the consequence aspect of risk, the previous two nuclear safety analysis requirements on risk can be satisfied with the DSA-DID approach to nuclear safety. It is also shown the use of multiple overlapping physical barriers and defense levels in the traditional DSA-DID approach to nuclear safety is risk-informed in the sense that it provides a consistently high level of confidence in the validity of the safety analysis results for various design basis events or accidents with a wide range of frequency of occurrence. It is hoped that by providing a linkage between the consequence analysis approach in DSA with a risk-informed perspective, greater understanding of the limitation and capability of the DSA approach is obtained. (author)

Integrated Approach Model of Risk, Control and Auditing of Accounting Information Systems

Directory of Open Access Journals (Sweden)

Claudiu BRANDAS

2013-01-01

Full Text Available The use of IT in the financial and accounting processes is growing fast and this leads to an increase in the research and professional concerns about the risks, control and audit of Ac-counting Information Systems (AIS. In this context, the risk and control of AIS approach is a central component of processes for IT audit, financial audit and IT Governance. Recent studies in the literature on the concepts of risk, control and auditing of AIS outline two approaches: (1 a professional approach in which we can fit ISA, COBIT, IT Risk, COSO and SOX, and (2 a research oriented approach in which we emphasize research on continuous auditing and fraud using information technology. Starting from the limits of existing approaches, our study is aimed to developing and testing an Integrated Approach Model of Risk, Control and Auditing of AIS on three cycles of business processes: purchases cycle, sales cycle and cash cycle in order to improve the efficiency of IT Governance, as well as ensuring integrity, reality, accuracy and availability of financial statements.

Adolescent perceptions of orthodontic treatment risks and risk information: A qualitative study.

Science.gov (United States)

Perry, John; Johnson, Ilona; Popat, Hashmat; Morgan, Maria Z; Gill, Paul

2018-04-24

For effective risk communication, clinicians must understand patients' values and beliefs in relation to the risks of treatment. This qualitative study aimed to explore adolescent perceptions of orthodontic treatment risks and risk information. Five focus groups were carried out with 32 school/college pupils aged 12-18 in Wales, UK. Participants were purposively selected and had all experienced orthodontic treatment. A thematic approach was used for analysis and data collection was completed at the point of data saturation. Four themes emerged from the data; (a) day-to-day risks of orthodontic treatment, (b) important orthodontic risk information, (c) engaging with orthodontic risk information and (d) managing the risks of orthodontic treatment. Day-to-day risks of orthodontic treatment that were affecting participants "here and now" were of most concern. Information about preventing the risks of treatment was deemed to be important. Participants did not actively seek risk information but engaged passively with information from convenient sources. Perceptions of risk susceptibility influenced participants' management of the risks of orthodontic treatment. This study demonstrates that adolescent patients can understand information about the nature and severity of orthodontic treatment risks. However, adolescent patients can have false perceptions if the risks are unfamiliar, perceived only to have a future impact or if seen as easy to control. Adolescent patients must be provided with timely and easily accessible risk information and with practical solutions to prevent the risks of treatment. The views and experiences gathered in this study can assist clinicians to better understand their young patients' beliefs about treatment risks, facilitate effective risk communication and contribute to improved patient-centred care. Copyright © 2018 Elsevier Ltd. All rights reserved.

Game Theory and Risk-Based Levee System Design