WorldWideScience

Sample records for rie reactive ion

  1. The effect of reactive ion etch (RIE) process conditions on ReRAM device performance

    Science.gov (United States)

    Beckmann, K.; Holt, J.; Olin-Ammentorp, W.; Alamgir, Z.; Van Nostrand, J.; Cady, N. C.

    2017-09-01

    The recent surge of research on resistive random access memory (ReRAM) devices has resulted in a wealth of different materials and fabrication approaches. In this work, we describe the performance implications of utilizing a reactive ion etch (RIE) based process to fabricate HfO2 based ReRAM devices, versus a more unconventional shadow mask fabrication approach. The work is the result of an effort to increase device yield and reduce individual device size. Our results show that choice of RIE etch gas (SF6 versus CF4) is critical for defining the post-etch device profile (cross-section), and for tuning the removal of metal layers used as bottom electrodes in the ReRAM device stack. We have shown that etch conditions leading to a tapered profile for the device stack cause poor electrical performance, likely due to metal re-deposition during etching, and damage to the switching layer. These devices exhibit nonlinear I-V during the low resistive state, but this could be improved to linear behavior once a near-vertical etch profile was achieved. Device stacks with vertical etch profiles also showed an increase in forming voltage, reduced switching variability and increased endurance.

  2. Reactive ion etching of microphotonic structures

    International Nuclear Information System (INIS)

    Du, J.; Glasscock, J.; Vanajek, J.; Savvides, N.

    2004-01-01

    Full text: Fabrication of microphotonic structures such as planar waveguides and other periodic structures based on silicon technology has become increasingly important due to the potential for integration of planar optical devices. We have fabricated various periodic microstructures on silicon wafers using standard optical lithography and reactive ion etching (RIE). For optical applications the surface roughness and the sidewall angle or steepness of microstructures are the most critical factors. In particular, sidewall roughness of the etched waveguide core accounts for most of the optical propagation loss. We show that by varying the main RIE parameters such as gas pressure, RF power and CF 4 /Ar/O 2 gas composition it is possible to produce microstructures with near-vertical sidewalls and very smooth surfaces. In addition to plasma etching conditions, poor edge quality of the mask often causes sidewall roughness. We employed Ni/Cr metal masks in these experiments for deep etching, and used Ar + ion milling instead of wet chemical etching to open the mask. This improves the edge quality of the mask and ultimately results in smooth sidewalls

  3. Controlling line-edge roughness and reactive ion etch lag in sub-150 nm features in borophosphosilicate glass

    International Nuclear Information System (INIS)

    Bhatnagar, Parijat; Panda, Siddhartha; Edleman, Nikki L.; Allen, Scott D.; Wise, Richard; Mahorowala, Arpan

    2007-01-01

    We have developed a reactive ion etch (RIE) process in borophosphosilicate glass (BPSG) for 150 nm line-and-space features, where line-edge roughness (LER) complemented with RIE lag becomes a major issue. Effect of flow rates and carbon-to-fluorine atomic ratio of fluorohydrocarbon gases was utilized to achieve acceptable process window allowing lower radio frequency powers therefore obtaining acceptable LER and RIE lag in the high-resolution features etched into BPSG

  4. Reactive ion etching of polymer materials for an energy harvesting device

    DEFF Research Database (Denmark)

    Wang, Fei; Bertelsen, Christian Vinther; Skands, Gustav

    2012-01-01

    In this paper, we have demonstrated deep reactive ion etching (RIE) of two MEMS compatible polymer materials CYTOP and TOPAS, which may be useful for energy harvesting devices. The CYTOP polymer was patterned and used as the electret for the following corona charging while the TOPAS polymer...

  5. A Reactive-Ion Etch for Patterning Piezoelectric Thin Film

    Science.gov (United States)

    Yang, Eui-Hyeok; Wild, Larry

    2003-01-01

    Reactive-ion etching (RIE) under conditions described below has been found to be a suitable means for patterning piezoelectric thin films made from such materials as PbZr(1-x)Ti(x)O3 or Ba(x)Sr(1.x)TiO3. In the original application for which this particular RIE process was developed, PbZr(1-x)Ti(x)O3 films 0.5 microns thick are to be sandwiched between Pt electrode layers 0.1 microns thick and Ir electrode layers 0.1 microns thick to form piezoelectric capacitor structures. Such structures are typical of piezoelectric actuators in advanced microelectromechanical systems now under development or planned to be developed in the near future. RIE of PbZr(1-x)Ti(x)O3 is usually considered to involve two major subprocesses: an ion-assisted- etching reaction, and a sputtering subprocess that removes reactive byproducts. RIE is favored over other etching techniques because it offers a potential for a high degree of anisotropy, high-resolution pattern definition, and good process control. However, conventional RIE is not ideal for patterning PbZr(1-x)Ti(x)O3 films at a thickness as great as that in the original intended application. In order to realize the potential benefits mentioned above, it is necessary to optimize process conditions . in particular, the composition of the etching gas and the values of such other process parameters as radio-frequency power, gas pressure, gas-flow rate, and duration of the process. Guidelines for determining optimum conditions can be obtained from experimental determination of etch rates as functions of these parameters. Etch-gas mixtures of BCl3 and Cl2, some also including Ar, have been found to offer a high degree of selectivity as needed for patterning of PbZr(1-x)Ti(x)O3 films on top of Ir electrode layers in thin-film capacitor structures. The selectivity is characterized by a ratio of approx.10:1 (rate of etching PbZr(1-x)Ti(x)O3 divided by rate of etching Ir and IrO(x)). At the time of reporting the information for this article

  6. Ultraviolet Laser Damage Dependence on Contamination Concentration in Fused Silica Optics during Reactive Ion Etching Process

    Directory of Open Access Journals (Sweden)

    Laixi Sun

    2018-04-01

    Full Text Available The reactive ion etching (RIE process of fused silica is often accompanied by surface contamination, which seriously degrades the ultraviolet laser damage performance of the optics. In this study, we find that the contamination behavior on the fused silica surface is very sensitive to the RIE process which can be significantly optimized by changing the plasma generating conditions such as discharge mode, etchant gas and electrode material. Additionally, an optimized RIE process is proposed to thoroughly remove polishing-introduced contamination and efficiently prevent the introduction of other contamination during the etching process. The research demonstrates the feasibility of improving the damage performance of fused silica optics by using the RIE technique.

  7. Investigation of reactive-ion-etch-induced damage of InP/InGaAs multiple quantum wells by photoluminescence

    DEFF Research Database (Denmark)

    Steffensen, O. M.; Birkedal, Dan; Hanberg, J.

    1995-01-01

    The effects of CH4/H2 reactive ion etching (RIE) on the optical properties of an InP/InGaAs multiple-quantum-well structure have been investigated by low-temperature photoluminescence (PL). The structure consisted of eight InGaAs quantum wells, lattice matched to InP, with nominal thicknesses of 0...

  8. Silicon surface damage caused by reactive ion etching in fluorocarbon gas mixtures containing hydrogen

    International Nuclear Information System (INIS)

    Norstroem, H.; Blom, H.; Ostling, M.; Nylandsted Larsen, A.; Keinonen, J.; Berg, S.

    1991-01-01

    For selective etching of SiO 2 on silicon, gases or gas mixtures containing hydrogen are often used. Hydrogen from the glow discharge promotes the formation of a thin film polymer layer responsible for the selectivity of the etching process. The reactive ion etch (RIE) process is known to create damage in the silicon substrate. The influence of hydrogen on the damage and deactivation of dopants is investigated in the present work. The distribution of hydrogen in silicon, after different etching and annealing conditions have been studied. The influence of the RIE process on the charge carrier concentration in silicon has been investigated. Various analytical techniques like contact resistivity measurements, four point probe measurements, and Hall measurements have been used to determine the influence of the RIE process on the electrical properties of processed silicon wafers. The hydrogen profile in as-etched and post annealed wafers was determined by the 1 H( 15 N,αγ) 12 C nuclear reaction. The depth of the deactivated surface layer is discussed in terms of the impinging hydrogen ion energy, i.e., the possibility of H + ions to pick up an energy equal to the peak-to-peak voltage of the rf signal

  9. Reactive Ion Etching as Cleaning Method Post Chemical Mechanical Polishing for Phase Change Memory Device

    International Nuclear Information System (INIS)

    Min, Zhong; Zhi-Tang, Song; Bo, Liu; Song-Lin, Feng; Bomy, Chen

    2008-01-01

    In order to improve nano-scale phase change memory performance, a super-clean interface should be obtained after chemical mechanical polishing (CMP) of Ge 2 Sb 2 Te 5 phase change films. We use reactive ion etching (RIE) as the cleaning method. The cleaning effect is analysed by scanning electron microscopy and an energy dispersive spectrometer. The results show that particle residue on the surface has been removed. Meanwhile, Ge 2 Sb 2 Te 5 material stoichiometric content ratios are unchanged. After the top electrode is deposited, current-voltage characteristics test demonstrates that the set threshold voltage is reduced from 13 V to 2.7V and the threshold current from 0.1mA to 0.025mA. Furthermore, we analyse the RIE cleaning principle and compare it with the ultrasonic method

  10. Unexpected impact of RIE gases on lithographic films

    Science.gov (United States)

    Glodde, M.; Bruce, R. L.; Hopstaken, M. J. P.; Saccomanno, M. R.; Felix, N.; Petrillo, K. E.; Price, B.

    2017-03-01

    Successful pattern transfer from the photoresist into the substrate depends on robust layers of lithographic films. Typically, an alternating sequence of inorganic (most often Si containing) and organic hardmask (HM) materials is used. Pattern transfer occurs then by using reactive ion etch (RIE) chemistry that is selective to one particular layer (such as: flurorinated RIE for Si HM). The impact of these RIE gases onto the layers acting as hardmask for the layer to be etched is typically neglected, except for known sputtering effects. We found that components of the RIE gases can penetrate deep into the "inert" layers and significantly modify them. For example, nitrogen used as component to etch spin-on carbon layers was found to travel up to 70 nm deep into Si HM materials and create layers with different material properties within this film. The question is being raised and discussed to which extent this atom implantation may impact the pattern transfer of the ever shrinking features.

  11. Wafer Surface Charge Reversal as a Method of Simplifying Nanosphere Lithography for Reactive Ion Etch Texturing of Solar Cells

    Directory of Open Access Journals (Sweden)

    Daniel Inns

    2007-01-01

    Full Text Available A simplified nanosphere lithography process has been developed which allows fast and low-waste maskings of Si surfaces for subsequent reactive ion etching (RIE texturing. Initially, a positive surface charge is applied to a wafer surface by dipping in a solution of aluminum nitrate. Dipping the positive-coated wafer into a solution of negatively charged silica beads (nanospheres results in the spheres becoming electrostatically attracted to the wafer surface. These nanospheres form an etch mask for RIE. After RIE texturing, the reflection of the surface is reduced as effectively as any other nanosphere lithography method, while this batch process used for masking is much faster, making it more industrially relevant.

  12. Adherent zirconia films by reactive ion implantation

    International Nuclear Information System (INIS)

    Bunker, S.N.; Armini, A.J.

    1993-01-01

    Conventional methods of forming ceramic coatings on metal substrates, such as CVD or plasma spray, typically retain a sharp interface and may have adhesion problems. In order to produce a completely mixed interface for better adhesion, a method using reactive ion implantation was used which can grow a thick stoichiometric film of an oxide ceramic starting from inside the substrate. Zirconium oxide ceramic films have been produced by this technique using a high-energy zirconium ion beam in an oxygen gas ambient. Compositional data are shown based on Auger electron spectroscopy of the film. Tribological properties of the layer were determined from wear and friction measurements using a pin-on-disk test apparatus. The adhesion was measured both by a scratch technique as well as by thermal shock. Results show an extremely adherent ZrO 2 film with good tribological properties

  13. AlGaN/GaN heterostructures with an AlGaN layer grown directly on reactive-ion-etched GaN showing a high electron mobility (>1300 cm2 V-1 s-1)

    Science.gov (United States)

    Yamamoto, Akio; Makino, Shinya; Kanatani, Keito; Kuzuhara, Masaaki

    2018-04-01

    In this study, the metal-organic-vapor-phase-epitaxial growth behavior and electrical properties of AlGaN/GaN structures prepared by the growth of an AlGaN layer on a reactive-ion-etched (RIE) GaN surface without regrown GaN layers were investigated. The annealing of RIE-GaN surfaces in NH3 + H2 atmosphere, employed immediately before AlGaN growth, was a key process in obtaining a clean GaN surface for AlGaN growth, that is, in obtaining an electron mobility as high as 1350 cm2 V-1 s-1 in a fabricated AlGaN/RIE-GaN structure. High-electron-mobility transistors (HEMTs) were successfully fabricated with AlGaN/RIE-GaN wafers. With decreasing density of dotlike defects observed on the surfaces of AlGaN/RIE-GaN wafers, both two-dimensional electron gas properties of AlGaN/RIE-GaN structures and DC characteristics of HEMTs were markedly improved. Since dotlike defect density was markedly dependent on RIE lot, rather than on growth lot, surface contaminations of GaN during RIE were believed to be responsible for the formation of dotlike defects and, therefore, for the inferior electrical properties.

  14. High temperature reactive ion etching of iridium thin films with aluminum mask in CF4/O2/Ar plasma

    Directory of Open Access Journals (Sweden)

    Chia-Pin Yeh

    2016-08-01

    Full Text Available Reactive ion etching (RIE technology for iridium with CF4/O2/Ar gas mixtures and aluminum mask at high temperatures up to 350 °C was developed. The influence of various process parameters such as gas mixing ratio and substrate temperature on the etch rate was studied in order to find optimal process conditions. The surface of the samples after etching was found to be clean under SEM inspection. It was also shown that the etch rate of iridium could be enhanced at higher process temperature and, at the same time, very high etching selectivity between aluminum etching mask and iridium could be achieved.

  15. SFG analysis of the molecular structures at the surfaces and buried interfaces of PECVD ultralow-dielectric constant pSiCOH: Reactive ion etching and dielectric recovery

    Science.gov (United States)

    Myers, John N.; Zhang, Xiaoxian; Huang, Huai; Shobha, Hosadurga; Grill, Alfred; Chen, Zhan

    2017-05-01

    Molecular structures at the surface and buried interface of an amorphous ultralow-k pSiCOH dielectric film were quantitatively characterized before and after reactive ion etching (RIE) and subsequent dielectric repair using sum frequency generation (SFG) vibrational spectroscopy and Auger electron spectroscopy. SFG results indicated that RIE treatment of the pSiCOH film resulted in a depletion of ˜66% of the surface methyl groups and changed the orientation of surface methyl groups from ˜47° to ˜40°. After a dielectric recovery process that followed the RIE treatment, the surface molecular structure was dominated by methyl groups with an orientation of ˜55° and the methyl surface coverage at the repaired surface was 271% relative to the pristine surface. Auger depth profiling indicated that the RIE treatment altered the top ˜25 nm of the film and that the dielectric recovery treatment repaired the top ˜9 nm of the film. Both SFG and Auger profiling results indicated that the buried SiCNH/pSiCOH interface was not affected by the RIE or the dielectric recovery process. Beyond characterizing low-k materials, the developed methodology is general and can be used to distinguish and characterize different molecular structures and elemental compositions at the surface, in the bulk, and at the buried interface of many different polymer or organic thin films.

  16. Underlying role of mechanical rigidity and topological constraints in physical sputtering and reactive ion etching of amorphous materials

    Science.gov (United States)

    Bhattarai, Gyanendra; Dhungana, Shailesh; Nordell, Bradley J.; Caruso, Anthony N.; Paquette, Michelle M.; Lanford, William A.; King, Sean W.

    2018-05-01

    Analytical expressions describing ion-induced sputter or etch processes generally relate the sputter yield to the surface atomic binding energy (Usb) for the target material. While straightforward to measure for the crystalline elemental solids, Usb is more complicated to establish for amorphous and multielement materials due to composition-driven variations and incongruent sublimation. In this regard, we show that for amorphous multielement materials, the ion-driven yield can instead be better understood via a consideration of mechanical rigidity and network topology. We first demonstrate a direct relationship between Usb, bulk modulus, and ion sputter yield for the elements, and then subsequently prove our hypothesis for amorphous multielement compounds by demonstrating that the same relationships exist between the reactive ion etch (RIE) rate and nanoindentation Young's modulus for a series of a -Si Nx :H and a -Si OxCy :H thin films. The impact of network topology is further revealed via application of the Phillips-Thorpe theory of topological constraints, which directly relates the Young's modulus to the mean atomic coordination () for an amorphous solid. The combined analysis allows the trends and plateaus in the RIE rate to be ultimately reinterpreted in terms of the atomic structure of the target material through a consideration of . These findings establish the important underlying role of mechanical rigidity and network topology in ion-solid interactions and provide additional considerations for the design and optimization of radiation-hard materials in nuclear and outer space environments.

  17. Reactive-ion etching of nylon fabric meshes using oxygen plasma for creating surface nanostructures

    International Nuclear Information System (INIS)

    Salapare, Hernando S.; Darmanin, Thierry; Guittard, Frédéric

    2015-01-01

    Graphical abstract: - Highlights: • Reactive-ion etching (RIE) is employed to nylon 6,6 fabrics to achieve surface texturing and improved wettability. • FTIR spectra of the treated samples exhibited decreased transmittance of amide and carboxylic acid groups due to etching. • Etching is enhanced for higher power plasma treatments and for samples with larger mesh sizes. • Decreased crystallinity was achieved after plasma treatment. • Higher power induced higher negative DC self-bias voltage on the samples that favored anisotropic and aggressive etching. - Abstract: A facile one-step oxygen plasma irradiation in reactive ion etching (RIE) configuration is employed to nylon 6,6 fabrics with different mesh sizes to achieve surface nanostructures and improved wettability for textile and filtration applications. To observe the effects of power and irradiation time on the samples, the experiments were performed using constant irradiation time in varying power and using constant power in varying irradiation times. Results showed improved wettability after the plasma treatment. The FTIR spectra of all the treated samples exhibited decreased transmittance of the amide and carboxylic acid groups due to surface etching. The changes in the surface chemistry are supported by the SEM data wherein etching and surface nanostructures were observed for the plasma-treated samples. The etching of the surfaces is enhanced for higher power plasma treatments. The thermal analysis showed that the plasma treatment resulted in decreased crystallinity. Surface chemistry showed that the effects of the plasma treatment on the samples have no significant difference for all the mesh sizes. However, surface morphology showed that the sizes of the surface cracks are the same for all the mesh sizes but samples with larger mesh sizes exhibited enhanced etching as compared to the samples with smaller mesh sizes. Higher power induced higher negative DC self-bias voltage on the samples that

  18. Deep reactive ion etching of fused silica using a single-coated soft mask layer for bio-analytical applications

    International Nuclear Information System (INIS)

    Ray, Tathagata; Zhu, Haixin; Meldrum, Deirdre R

    2010-01-01

    In this note, we present our results from process development and characterization of reactive ion etching (RIE) of fused silica using a single-coated soft masking layer (KMPR® 1025, Microchem Corporation, Newton, MA). The effects of a number of fluorine-radical-based gaseous chemistries, the gas flow rate, RF power and chamber pressure on the etch rate and etching selectivity of fused silica were studied using factorial experimental designs. RF power and pressure were found to be the most important factors in determining the etch rate. The highest fused silica etch rate obtained was about 933 Å min −1 by using SF 6 -based gas chemistry, and the highest etching selectivity between the fused silica and KMPR® 1025 was up to 1.2 using a combination of CF 4 , CHF 3 and Ar. Up to 30 µm deep microstructures have been successfully fabricated using the developed processes. The average area roughness (R a ) of the etched surface was measured and results showed it is comparable to the roughness obtained using a wet etching technique. Additionally, near-vertical sidewalls (with a taper angle up to 85°) have been obtained for the etched microstructures. The processes developed here can be applied to any application requiring fabrication of deep microstructures in fused silica with near-vertical sidewalls. To our knowledge, this is the first note on deep RIE of fused silica using a single-coated KMPR® 1025 masking layer and a non-ICP-based reactive ion etcher. (technical note)

  19. Influence of Reactive Ion Etching on THz Transmission and Reflection Properties of NiCr Film Deposited on a Dielectric Substrate

    Directory of Open Access Journals (Sweden)

    Jun Gou

    2015-06-01

    Full Text Available Enhanced terahertz (THz absorption of NiCr film deposited on a dielectric substrate has been proven by applying a reactive ion etching (RIE treatment to the dielectric film. Nano – scale nickel – chromium (NiCr thin films are deposited on RIE treated silicon dioxide (SiO2 dielectric substrates to study the transmission and reflection characteristics. Experimental results suggest that both transmission and reflection of NiCr film are weakened by the RIE treatment. The most significant decrease of transmission is observed in 1 ~ 4 THz while that of reflection occurs in 1.7 ~ 2.5 THz band. The decrease of both transmission and reflection is more significant for NiCr film with higher thickness. The RIE treatment, which induces nano – scale surface structures and increases the effective surface area of NiCr film, enhances the absorption and weakens the transmission and reflection of THz radiation.DOI: http://dx.doi.org/10.5755/j01.ms.21.2.6131

  20. Preparation of composite micro/nano structure on the silicon surface by reactive ion etching: Enhanced anti-reflective and hydrophobic properties

    Science.gov (United States)

    Zeng, Yu; Fan, Xiaoli; Chen, Jiajia; He, Siyu; Yi, Zao; Ye, Xin; Yi, Yougen

    2018-05-01

    A silicon substrate with micro-pyramid structure (black silicon) is prepared by wet chemical etching and then subjected to reactive ion etching (RIE) in the mixed gas condition of SF6, CHF3 and He. We systematically study the impacts of flow rates of SF6, CHF3 and He, the etching pressure and the etching time on the surface morphology and reflectivity through various characterizations. Meanwhile, we explore and obtain the optimal combination of parameters for the preparation of composite structure that match the RIE process based on the basis of micro-pyramid silicon substrate. The composite sample prepared under the optimum parameters exhibits excellent anti-reflective performance, hydrophobic, self-cleaning and anti-corrosive properties. Based on the above characteristics, the composite micro/nano structure can be applied to solar cells, photodetectors, LEDs, outdoor devices and other important fields.

  1. Deep Reactive Ion Etching for High Aspect Ratio Microelectromechanical Components

    DEFF Research Database (Denmark)

    Jensen, Søren; Yalcinkaya, Arda Deniz; Jacobsen, S.

    2004-01-01

    A deep reactive ion etch (DRIE) process for fabrication of high aspect ratio trenches has been developed. Trenches with aspect ratios exceeding 20 and vertical sidewalls with low roughness have been demonstrated. The process has successfully been used in the fabrication of silicon-on-insulator (SOI...

  2. Control of the ambident reactivity of the nitrite ion

    DEFF Research Database (Denmark)

    Dong, Hai; Rahm, Martin; Thota, Niranjan

    2013-01-01

    of this difference was addressed. The ambident reactivity of the nitrite ion has been found to be the cause of the complex product formation observed, which can be controlled by a neighbouring equatorial ester group. Both N-attack and O-attack occur in the absence of the ester group, whereas O-attack is favoured...

  3. Fragmentation and reactivity of energy-selected ferrocenium ions

    International Nuclear Information System (INIS)

    Mestdagh, H.; Dutuit, O.; Heninger, M.; Thissen, R.; Alcaraz, C.

    2002-01-01

    In this study, results concerning the discussion of state-selected ferrocenium ions (c-C 5 H 5 ) 2 Fe + commonly called Cp 2 Fe + , as well as their reactions with methanol and ethanol are presented. Parent ions Cp 2 Fe + were produced by vacuumultraviolett (VUV) photoionization of neutral ferrocene using synchrotron radiation, and selected in internal energy by threshold photoelectron-photoion coincidences. The apparatus is divided into three differentially pumped regions: the source, the reaction and the detection zones. In source, state-selected parent ions are formed and can be selected in mass by a first quadrupole filter. State-selected ions are then injected in the second zone which is a RF octopole ion guide where reaction product ions are mass analyzed by a second quadrupole filter and detected by microchannelplates. In addition, the long flight time in the octopoles (several hundreds of microseconds) allows studying long-lived metastable ions. Total mass spectra were recorded at different photon energies, in addition to the main CpFe + and Fe + fragments, several minor fragments were detected such as C 10 H 10 + which reflects the formation of a C-C bond between the two Cp ligands. Losses of CH 3 , C 2 H 2 and C-4H 4 also indicate that important structure rearrangements take place before cleavage. The appearance energies of each mass-selected fragment ion were measured by recording fragment ion yields as a function of photon energy. Surprisingly, all fragments were found to have the same energy onset, i.e. 13.2 eV photon energy, except for C 3 H 3 Fe + (m/z 95). For Fe + ions, a sharp increase was observed at 17 eV, above the thermochemical onset of Fe + + 2 Cp. The 13.2 eV appearance energy of Fe + is thus assigned to the formation of Fe - + C 10 H 10 . The reactivity of ferrocenium ion with methanol and ethanol was investigated as a function of photon energy. While no reaction occurs at lower photon energies, several reaction products appear at 13.0 e

  4. Investigations on diamond nanostructuring of different morphologies by the reactive-ion etching process and their potential applications.

    Science.gov (United States)

    Kunuku, Srinivasu; Sankaran, Kamatchi Jothiramalingam; Tsai, Cheng-Yen; Chang, Wen-Hao; Tai, Nyan-Hwa; Leou, Keh-Chyang; Lin, I-Nan

    2013-08-14

    We report the systematic studies on the fabrication of aligned, uniform, and highly dense diamond nanostructures from diamond films of various granular structures. Self-assembled Au nanodots are used as a mask in the self-biased reactive-ion etching (RIE) process, using an O2/CF4 process plasma. The morphology of diamond nanostructures is a close function of the initial phase composition of diamond. Cone-shaped and tip-shaped diamond nanostructures result for microcrystalline diamond (MCD) and nanocrystalline diamond (NCD) films, whereas pillarlike and grasslike diamond nanostructures are obtained for Ar-plasma-based and N2-plasma-based ultrananocrystalline diamond (UNCD) films, respectively. While the nitrogen-incorporated UNCD (N-UNCD) nanograss shows the most-superior electron-field-emission properties, the NCD nanotips exhibit the best photoluminescence properties, viz, different applications need different morphology of diamond nanostructures to optimize the respective characteristics. The optimum diamond nanostructure can be achieved by proper choice of granular structure of the initial diamond film. The etching mechanism is explained by in situ observation of optical emission spectrum of RIE plasma. The preferential etching of sp(2)-bonded carbon contained in the diamond films is the prime factor, which forms the unique diamond nanostructures from each type of diamond films. However, the excited oxygen atoms (O*) are the main etching species of diamond film.

  5. Metal ion separations using reactive membranes

    International Nuclear Information System (INIS)

    Way, J.D.

    1993-01-01

    A membrane is a barrier between two phases. If one component of a mixture moves through the membrane faster than another mixture component, a separation can be accomplished. Membranes are used commercially for many applications including gas separations, water purification, particle filtration, and macromolecule separations (Abelson). There are two points to note concerning this definition. First, a membrane is defined based on its function, not the material used to make the membrane. Secondly, a membrane separation is a rate process. The separation is accomplished by a driving force, not by equilibrium between phases. Liquids that are immiscible with the feed and product streams can also be used as membrane materials. Different solutes will have different solubilities and diffusion coefficients in a liquid. The product of the diffusivity and the solubility is known as the permeability coefficient, which is proportional to the solute flux. Differences in permeability coefficient will produce a separation between solutes at constant driving force. Because the diffusion coefficients in liquids are typically orders of magnitude higher than in polymers, a larger flux can be obtained. Further enhancements can be accomplished by adding a nonvolatile complexation agent to the liquid membrane. One can then have either coupled or facilitated transport of metal ions through a liquid membrane. The author describes two implementations of this concept, one involving a liquid membrane supported on a microporous membrane, and the other an emulsion liquid membrane, where separation occurs to internal receiving phases. Applications and costing studies for this technology are reviewed, and a brief summary of some of the problems with liquid membranes is presented

  6. Surface characterization after subaperture reactive ion beam etching

    Energy Technology Data Exchange (ETDEWEB)

    Miessler, Andre; Arnold, Thomas; Rauschenbach, Bernd [Leibniz-Institut fuer Oberflaechenmodifizierung (IOM), Leipzig (Germany)

    2010-07-01

    In usual ion beam etching processes using inert gas (Ar, Xe, Kr..) the material removal is determined by physical sputtering effects on the surface. The admixture of suitable gases (CF{sub 4}+O{sub 2}) into the glow discharge of the ion beam source leads to the generation of reactive particles, which are accelerated towards the substrate where they enhance the sputtering process by formation of volatile chemical reaction products. During the last two decades research in Reactive Ion Beam Etching (RIBE) has been done using a broad beam ion source which allows the treatment of smaller samples (diameter sample < diameter beam). Our goal was to apply a sub-aperture Kaufman-type ion source in combination with an applicative movement of the sample with respect to the source, which enables us to etch areas larger than the typical lateral dimensions of the ion beam. Concerning this matter, the etching behavior in the beam periphery plays a decisive role and has to be investigated. We use interferometry to characterize the final surface topography and XPS measurements to analyze the chemical composition of the samples after RIBE.

  7. Reactivity of the cadmium ion in concentrated phosphoric acid solutions.

    Science.gov (United States)

    De Gyves, J; Gonzales, J; Louis, C; Bessiere, J

    1989-07-01

    The solvation transfer coefficients which characterize the changes of ion reactivity with phosphoric acid concentration have been calculated for cadmium from the constants of the successive chloride complexes, and for silver and diethyldithiophosphate from potentiometric measurements. They evidence the strong desolvation of the cadmium species in concentrated phosphoric acid media, causing a remarkable increase of its reactivity. They allow the results of liquid-liquid extraction, precipitation and flotation reactions to be correctly interpreted and their changes to be foreseen when the reagents are modified.

  8. Transport of secondary electrons and reactive species in ion tracks

    Science.gov (United States)

    Surdutovich, Eugene; Solov'yov, Andrey V.

    2015-08-01

    The transport of reactive species brought about by ions traversing tissue-like medium is analysed analytically. Secondary electrons ejected by ions are capable of ionizing other molecules; the transport of these generations of electrons is studied using the random walk approximation until these electrons remain ballistic. Then, the distribution of solvated electrons produced as a result of interaction of low-energy electrons with water molecules is obtained. The radial distribution of energy loss by ions and secondary electrons to the medium yields the initial radial dose distribution, which can be used as initial conditions for the predicted shock waves. The formation, diffusion, and chemical evolution of hydroxyl radicals in liquid water are studied as well. COST Action Nano-IBCT: Nano-scale Processes Behind Ion-Beam Cancer Therapy.

  9. Triplasmatron sources for broad and reactive ion beams

    International Nuclear Information System (INIS)

    Lejeune, C.; Grandchamp, J.P.; Kessi, O.; Gilles, J.P.

    1986-01-01

    Two alternative discharge structures, which are both convenient for the extraction of broad and reactive ion beams, are described. They have been designed in order to overcome both lifetime and beam contamination problems while preserving a high ionization efficiency and a smooth plasma uniformity. They both use a hot cathode duoplasmatron discharge to inject ionizing electrons into the main ionization chamber, according to the triplasmatron concept. The triplasmatron multipolar ion source (TMIS) uses the magnetic multipolar containment of both electrons and ions, whereas the triplasmatron reflex ion source (TRIS) uses the electrostatic and geometric containment of the ionizing electrons. The behaviour and performance of both structures are reported and discussed with a special emphasis to the operation with either oxygen or fluorocarbon gases. (author)

  10. Freestanding nanostructures via reactive ion beam angled etching

    Directory of Open Access Journals (Sweden)

    Haig A. Atikian

    2017-05-01

    Full Text Available Freestanding nanostructures play an important role in optical and mechanical devices for classical and quantum applications. Here, we use reactive ion beam angled etching to fabricate optical resonators in bulk polycrystalline and single crystal diamond. Reported quality factors are approximately 30 000 and 286 000, respectively. The devices show uniformity across 25 mm samples, a significant improvement over comparable techniques yielding freestanding nanostructures.

  11. Reactive ion assisted deposition of aluminum oxynitride thin films

    International Nuclear Information System (INIS)

    Hwangbo, C.K.; Lingg, L.J.; Lehan, J.P.; Macleod, H.A.; Suits, F.

    1989-01-01

    Optical properties, stoichiometry, chemical bonding states, and crystal structure of aluminum oxynitride (AlO/sub x/N/sub y/) thin films prepared by reactive ion assisted deposition were investigated. The results show that by controlling the amount of reactive gases the refractive index of aluminum oxynitride films at 550 nm is able to be varied from 1.65 to 1.83 with a very small extinction coefficient. Variations of optical constants and chemical bonding states of aluminum oxynitride films are related to the stoichiometry. From an x-ray photoelectron spectroscopy analysis it is observed that our aluminum oxynitride film is not simply a mixture of aluminum oxide and aluminum nitride but a continuously variable compound. The aluminum oxynitride films are amorphous from an x-ray diffraction analysis. A rugate filter using a step index profile of aluminum oxynitride films was fabricated by nitrogen ion beam bombardment of a growing Al film with backfill oxygen pressure as the sole variation. This filter shows a high resistivity to atmospheric moisture adsorption, suggesting that the packing density of aluminum oxynitride films is close to unity and the energetic ion bombardment densifies the film as well as forming the compound

  12. Switchable Super-Hydrophilic/Hydrophobic Indium Tin Oxide (ITO) Film Surfaces on Reactive Ion Etching (RIE) Textured Si Wafer.

    Science.gov (United States)

    Kim, Hwa-Min; Litao, Yao; Kim, Bonghwan

    2015-11-01

    We have developed a surface texturing process for pyramidal surface features along with an indium tin oxide (ITO) coating process to fabricate super-hydrophilic conductive surfaces. The contact angle of a water droplet was less than 5 degrees, which means that an extremely high wettability is achievable on super-hydrophilic surfaces. We have also fabricated a super-hydrophobic conductive surface using an additional coating of polytetrafluoroethylene (PTFE) on the ITO layer coated on the textured Si surface; the ITO and PTFE films were deposited by using a conventional sputtering method. We found that a super-hydrophilic conductive surface is produced by ITO coated on the pyramidal Si surface (ITO/Si), with contact angles of approximately 0 degrees and a resistivity of 3 x 10(-4) Ω x cm. These values are highly dependent on the substrate temperature during the sputtering process. We also found that the super-hydrophobic conductive surface produced by the additional coating of PTFE on the pyramidal Si surface with an ITO layer (PTFE/ITO/Si) has a contact angle of almost 160 degrees and a resistivity of 3 x 10(-4) Ω x cm, with a reflectance lower than 9%. Therefore, these processes can be used to fabricate multifunctional features of ITO films for switchable super-hydrophilic and super-hydrophobic surfaces.

  13. Optimization of time on CF{sub 4}/O{sub 2} etchant for inductive couple plasma reactive ion etching of TiO{sub 2} thin film

    Energy Technology Data Exchange (ETDEWEB)

    Adzhri, R., E-mail: adzhri@gmail.com; Fathil, M. F. M.; Ruslinda, A. R.; Gopinath, Subash C. B.; Voon, C. H.; Foo, K. L.; Nuzaihan, M. N. M.; Azman, A. H.; Zaki, M. [Institute of Nano Electronic Engineering (INEE), Universiti Malaysia Perlis (UniMAP), Perlis (Malaysia); Arshad, M. K. Md., E-mail: mohd.khairuddin@unimap.edu.my; Hashim, U.; Ayub, R. M. [Institute of Nano Electronic Engineering (INEE), Universiti Malaysia Perlis (UniMAP), Perlis (Malaysia); School of Microelectronic Engineering, Universiti Malaysia Perlis (UniMAP), Perlis (Malaysia)

    2016-07-06

    In this work, we investigate the optimum etching of titanium dioxide (TiO{sub 2}) using inductive couple plasma reactive ion etching (ICP-RIE) on our fabricated devices. By using a combination of CF{sub 4}/O{sub 2} gases as plasma etchant with ratio of 3:1, three samples of TiO{sub 2} thin film were etched with different time duration of 10 s, 15 s and 20 s. The ion bombardment of CF{sub 4} gases with plasma enhancement by O{sub 2} gas able to break the oxide bond of TiO{sub 2} and allow anisotropic etch profile with maximum etch rate of 18.6 nm/s. The sample was characterized by using optical profilometer to determine the depth of etched area and scanning electron microscopy (SEM) for etch profile characterization.

  14. Optimization of time on CF_4/O_2 etchant for inductive couple plasma reactive ion etching of TiO_2 thin film

    International Nuclear Information System (INIS)

    Adzhri, R.; Fathil, M. F. M.; Ruslinda, A. R.; Gopinath, Subash C. B.; Voon, C. H.; Foo, K. L.; Nuzaihan, M. N. M.; Azman, A. H.; Zaki, M.; Arshad, M. K. Md.; Hashim, U.; Ayub, R. M.

    2016-01-01

    In this work, we investigate the optimum etching of titanium dioxide (TiO_2) using inductive couple plasma reactive ion etching (ICP-RIE) on our fabricated devices. By using a combination of CF_4/O_2 gases as plasma etchant with ratio of 3:1, three samples of TiO_2 thin film were etched with different time duration of 10 s, 15 s and 20 s. The ion bombardment of CF_4 gases with plasma enhancement by O_2 gas able to break the oxide bond of TiO_2 and allow anisotropic etch profile with maximum etch rate of 18.6 nm/s. The sample was characterized by using optical profilometer to determine the depth of etched area and scanning electron microscopy (SEM) for etch profile characterization.

  15. Influence of deep RIE tolerances on comb-drive actuator performance

    International Nuclear Information System (INIS)

    Chen, Bangtao; Miao, Jianmin

    2007-01-01

    This paper analyses the various etching tolerances and profiles of comb-drive microstructures by using deep reactive ion etching (RIE) and studies their influence on the actuator's performance. The comb-drive actuators studied in this paper are fabricated with the silicon-on-glass (SOG) wafer process using deep RIE and wafer bonding, which present very high-aspect-ratio and high-strength microstructures. However, the deep RIE process generates some tolerances and varies the dimension and profile of comb fingers and flexures due to the process limitations. We have analysed the different etching tolerances and studied their influence on the actuator's performance, in terms of the electrostatic force, flexure stiffness, actuator's displacement, air damping and quality factor of the actuator. The analysis shows that the comb fingers with a positive slope profile generated a larger electrostatic force, and the flexures with a negative profile induced the loss of the actuator's stiffness. The combination of these two profiles leads to a great increase in the actuator's displacement and decrease in the quality factor. The measured results of the SOG fabricated actuators have demonstrated the influence of deep RIE tolerance on the actuator's performance

  16. Polymer degradation in reactive ion etching and its possible application to all dry processes

    International Nuclear Information System (INIS)

    Hiraoka, H.; Welsh, L.W. Jr.

    1981-01-01

    Dry etching processes involving CF 4 -plasma and reactive ion etching become increasingly important for microcircuit fabrication techniques. In these techniques polymer degradation and etch resistance against reactive species like F atoms and CF 3 + ions are the key factors in the processes. It is well-known that classical electron beam resists like poly(methyl methacrylate) and poly(1-butene sulfone) are not suitable for dry etching processes because they degrade rapidly under these etching conditions. In order to find a correlation of etching rate and polymer structures the thickness loss of polymer films have been measured for a variety of polymer films in reactive ion etching conditions, where CF 3 + ions are the major reactive species with an accelerating potential of 500 volts. Because of its high CF 4 -plasma and reactive ion etch resistance, and because of its high electron beam sensitivity, poly(methacrylonitrile) provides a positive working electron beam resist uniquely suited for all dry processes. (author)

  17. Reactive ion etching of GaSb, (Al,Ga)Sb, and InAs for novel device applications

    International Nuclear Information System (INIS)

    LaTulipe, D.C.; Frank, D.J.; Munekata, H.

    1991-01-01

    Although a variety of novel device proposals for GaSb/(Al,Ga)Sb/InAs heterostructures have been made, relatively little is known about processing these materials. The authors of this paper have studied the reactive ion etching characteristics of GaSb, (Al,Ga)Sb, and InAs in both methane/hydrogen and chlorine gas chemistries. At conditions similar to those reported elsewhere for RIE of InP and GaAs in CH 4 /H 2 , the etch rate of (Al,Ga)Sb was found to be near zero, while GaSb and InAs etched at 200 Angstrom/minute. Under conditions where the etch mechanism is primarily physical sputtering, the three compounds etch at similar rates. Etching in Cl 2 was found to yield anistropic profiles, with the etch rate of (Al,Ga)Sb increasing with Al mole fraction, while InAs remains unetched. Damage to the InAs stop layer was investigated by sheet resistance and mobility measurements. These etching techniques were used to fabricate a novel InAs- channel FET composed of these materials. Several scanning electron micrographs of etching results are shown along with preliminary electrical characteristics

  18. Wafer-Scale Hierarchical Nanopillar Arrays Based on Au Masks and Reactive Ion Etching for Effective 3D SERS Substrate

    Directory of Open Access Journals (Sweden)

    Dandan Men

    2018-02-01

    Full Text Available Two-dimensional (2D periodic micro/nanostructured arrays as SERS substrates have attracted intense attention due to their excellent uniformity and good stability. In this work, periodic hierarchical SiO2 nanopillar arrays decorated with Ag nanoparticles (NPs with clean surface were prepared on a wafer-scale using monolayer Au NP arrays as masks, followed by reactive ion etching (RIE, depositing Ag layer and annealing. For the prepared SiO2 nanopillar arrays decorated with Ag NPs, the size of Ag NPs was tuned from ca. 24 to 126 nanometers by controlling the deposition thickness of Ag film. Importantly, the SiO2 nanopillar arrays decorated with Ag NPs could be used as highly sensitive SERS substrate for the detection of 4-aminothiophenol (4-ATP and rhodamine 6G (R6G due to the high loading of Ag NPs and a very uniform morphology. With a deposition thickness of Ag layer of 30 nm, the SiO2 nanopillar arrays decorated with Ag NPs exhibited the best sensitive SERS activity. The excellent SERS performance of this substrate is mainly attributed to high-density “hotspots” derived from nanogaps between Ag NPs. Furthermore, this strategy might be extended to synthesize other nanostructured arrays with a large area, which are difficult to be prepared only via conventional wet-chemical or physical methods.

  19. Wafer-Scale Hierarchical Nanopillar Arrays Based on Au Masks and Reactive Ion Etching for Effective 3D SERS Substrate.

    Science.gov (United States)

    Men, Dandan; Wu, Yingyi; Wang, Chu; Xiang, Junhuai; Yang, Ganlan; Wan, Changjun; Zhang, Honghua

    2018-02-04

    Two-dimensional (2D) periodic micro/nanostructured arrays as SERS substrates have attracted intense attention due to their excellent uniformity and good stability. In this work, periodic hierarchical SiO₂ nanopillar arrays decorated with Ag nanoparticles (NPs) with clean surface were prepared on a wafer-scale using monolayer Au NP arrays as masks, followed by reactive ion etching (RIE), depositing Ag layer and annealing. For the prepared SiO₂ nanopillar arrays decorated with Ag NPs, the size of Ag NPs was tuned from ca. 24 to 126 nanometers by controlling the deposition thickness of Ag film. Importantly, the SiO₂ nanopillar arrays decorated with Ag NPs could be used as highly sensitive SERS substrate for the detection of 4-aminothiophenol (4-ATP) and rhodamine 6G (R6G) due to the high loading of Ag NPs and a very uniform morphology. With a deposition thickness of Ag layer of 30 nm, the SiO₂ nanopillar arrays decorated with Ag NPs exhibited the best sensitive SERS activity. The excellent SERS performance of this substrate is mainly attributed to high-density "hotspots" derived from nanogaps between Ag NPs. Furthermore, this strategy might be extended to synthesize other nanostructured arrays with a large area, which are difficult to be prepared only via conventional wet-chemical or physical methods.

  20. Etching radical controlled gas chopped deep reactive ion etching

    Science.gov (United States)

    Olynick, Deidre; Rangelow, Ivo; Chao, Weilun

    2013-10-01

    A method for silicon micromachining techniques based on high aspect ratio reactive ion etching with gas chopping has been developed capable of producing essentially scallop-free, smooth, sidewall surfaces. The method uses precisely controlled, alternated (or chopped) gas flow of the etching and deposition gas precursors to produce a controllable sidewall passivation capable of high anisotropy. The dynamic control of sidewall passivation is achieved by carefully controlling fluorine radical presence with moderator gasses, such as CH.sub.4 and controlling the passivation rate and stoichiometry using a CF.sub.2 source. In this manner, sidewall polymer deposition thicknesses are very well controlled, reducing sidewall ripples to very small levels. By combining inductively coupled plasmas with controlled fluorocarbon chemistry, good control of vertical structures with very low sidewall roughness may be produced. Results show silicon features with an aspect ratio of 20:1 for 10 nm features with applicability to nano-applications in the sub-50 nm regime. By comparison, previous traditional gas chopping techniques have produced rippled or scalloped sidewalls in a range of 50 to 100 nm roughness.

  1. Dependence of energy per molecule on sputtering yields with reactive gas cluster ions

    International Nuclear Information System (INIS)

    Toyoda, Noriaki; Yamada, Isao

    2010-01-01

    Gas cluster ions show dense energy deposition on a target surface, which result in the enhancement of chemical reactions. In reactive sputtering with gas cluster ions, the energy per atom or molecule plays an important role. In this study, the average cluster size (N, the number of atoms or molecules in a cluster ion) was controlled; thereby the dependences of the energy per molecule on the sputtering yields of carbon by CO 2 cluster ions and that of Si by SF 6 /Ar mixed gas cluster ions were investigated. Large CO 2 cluster ions with energy per molecule of 1 eV showed high reactive sputtering yield of an amorphous carbon film. However, these ions did not cause the formation of large craters on a graphite surface. It is possible to achieve very low damage etching by controlling the energy per molecule of reactive cluster ions. Further, in the case of SF 6 /Ar mixed cluster ions, it was found that reactive sputtering was enhanced when a small amount of SF 6 gas (∼10%) was mixed with Ar. The reactive sputtering yield of Si by one SF 6 molecule linearly increased with the energy per molecule.

  2. Pattern transfer on fused silica samples using sub-aperture reactive ion beam etching

    Energy Technology Data Exchange (ETDEWEB)

    Miessler, Andre; Arnold, Thomas [Leibniz-Institut fuer Oberflaechenmodifizierung (IOM), Permoserstrasse 15, D-04318 Leipzig (Germany)

    2012-07-01

    In comparison to sole Ar ion beam sputtering Reactive Ion Beam Etching (RIBE) reveals the main advantage of increasing the selectivity for different kind of materials due to chemical contributions during the material removal. Therefore RIBE is qualified to be an excellent candidate for pattern transfer applications. The goal of the present study is to apply a sub-aperture reactive ion beam for pattern transfer on large fused silica samples. Concerning this matter, the etching behavior in the ion beam periphery plays a decisive role. Using a Kaufman-typed ion source with NF{sub 3} as reactive gas, XPS measurements of the modified surface exposes impurities like Ni, Fe and Cr, which belongs to chemically eroded material of the plasma pot and a layer formation of silicon nitride, handicaps the etching process mainly in the beam periphery where the sputtering contribution decrease. These side effects influence the pattern transfer of trench structures, produced in AZ MIR 701 photoresist by lithography on a 2'' fused silica plate, by changing the selectivity due to modified chemical reactions of the resist layer. Concerning this we investigate a RF-Ion source for sub aperture reactive ion beam applications and finally we examine the pattern transfer on large fused silica plates using NF{sub 3}-sub-aperture RIBE.

  3. Reactive Landing of Dendrimer Ions onto Activated Self-assembled Monolayer Surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Qichi; Laskin, Julia

    2014-02-06

    The reactivity of gaseous, amine-terminated polyamidoamine (PAMAM) dendrimer ions with activated self-assembled monolayer (SAM) surfaces terminated with N-hydroxysuccinimidyl ester groups (NHS-SAM) is examined using mass-selected ion deposition combined with in situ infrared reflection absorption spectroscopy (IRRAS). The reaction extent is determined from depletion of the infrared band at 1753 cm-1, corresponding to the stretching vibration of the NHS carbonyl groups following ion deposition. For reaction yields below 10%, NHS band depletion follows a linear dependence on the ion dose. By comparing the kinetics plots obtained for 1,12-dodecanediamine and different generations of dendrimer ions (G0–G3) containing 4, 8, 16, and 32 terminal amino group, we demonstrate that the relative reaction efficiency increases linearly with the number of NH2 groups in the molecule. This finding is rationalized assuming the formation of multiple amide bonds upon collision of higher-generation dendrimers with NHS-SAM. Furthermore, by comparing the NHS band depletion following deposition of [M+4H]4+ ions of the G2 dendrimer at 30, 80, and 120 eV, we demonstrate that the ion’s kinetic energy has no measurable effect on reaction efficiency. Similarly, the ion’s charge state only has a minor effect on the reactive landing efficiency of dendrimer ions. Our results indicate that reactive landing is an efficient approach for highly selective covalent immobilization of complex multifunctional molecules onto organic surfaces terminated with labile functional groups.

  4. Fabrication of submicron structures in nanoparticle/polymer composite by holographic lithography and reactive ion etching

    Science.gov (United States)

    Zhang, A. Ping; He, Sailing; Kim, Kyoung Tae; Yoon, Yong-Kyu; Burzynski, Ryszard; Samoc, Marek; Prasad, Paras N.

    2008-11-01

    We report on the fabrication of nanoparticle/polymer submicron structures by combining holographic lithography and reactive ion etching. Silica nanoparticles are uniformly dispersed in a (SU8) polymer matrix at a high concentration, and in situ polymerization (cross-linking) is used to form a nanoparticle/polymer composite. Another photosensitive SU8 layer cast upon the nanoparticle/SU8 composite layer is structured through holographic lithography, whose pattern is finally transferred to the nanoparticle/SU8 layer by the reactive ion etching process. Honeycomb structures in a submicron scale are experimentally realized in the nanoparticle/SU8 composite.

  5. Pattern transfer on large samples using a sub-aperture reactive ion beam

    Energy Technology Data Exchange (ETDEWEB)

    Miessler, Andre; Mill, Agnes; Gerlach, Juergen W.; Arnold, Thomas [Leibniz-Institut fuer Oberflaechenmodifizierung (IOM), Permoserstrasse 15, D-04318 Leipzig (Germany)

    2011-07-01

    In comparison to sole Ar ion beam sputtering Reactive Ion Beam Etching (RIBE) reveals the main advantage of increasing the selectivity for different kind of materials due to chemical contributions during the material removal. Therefore RIBE is qualified to be an excellent candidate for pattern transfer applications. The goal of the present study is to apply a sub-aperture reactive ion beam for pattern transfer on large fused silica samples. Concerning this matter, the etching behavior in the ion beam periphery plays a decisive role. Using CF{sub 4} as reactive gas, XPS measurements of the modified surface exposes impurities like Ni, Fe and Cr, which belongs to chemically eroded material of the plasma pot as well as an accumulation of carbon (up to 40 atomic percent) in the beam periphery, respectively. The substitution of CF{sub 4} by NF{sub 3} as reactive gas reveals a lot of benefits: more stable ion beam conditions in combination with a reduction of the beam size down to a diameter of 5 mm and a reduced amount of the Ni, Fe and Cr contaminations. However, a layer formation of silicon nitride handicaps the chemical contribution of the etching process. These negative side effects influence the transfer of trench structures on quartz by changing the selectivity due to altered chemical reaction of the modified resist layer. Concerning this we investigate the pattern transfer on large fused silica plates using NF{sub 3}-sub-aperture RIBE.

  6. The reactivity of ion-implanted SiC

    International Nuclear Information System (INIS)

    McHargue, C.J.; Lewis, M.B.; Williams, J.M.; Appleton, B.R.

    1985-01-01

    Implantation of chromium into single crystal or polycrystalline α-SiC produces a surface amorphous layer for displacement damage greater than about 0.2 displacements per atom at room temperature. The enhanced chemical reactivity of such specimens was studied by two methods: chemical etching rate and oxidation rate. The chemical etching rates in a saturated solution of 50% K 3 Fe(CN) 6 plus 50% KOH were measured. The etching rate for the amorphous layer was 2.4-3.7 times that of the polycrystalline samples and 3.0-4.1 times that of the single-crystal samples. Polycrystalline specimens were exposed to flowing oxygen for 1 h at 1300 0 C. Rutherford backscattering and the nuclear reaction 16 O(d,p) 17 O* were used to determine the amount of oxygen on the surface. The amount of oxygen (and the thickness of oxide) over the amorphous region was 1.67 times that over the crystalline region. The relative thicknesses of the oxide on the amorphous and crystalline regions were confirmed by measuring the sputtering time required to remove the oxygen signal in an Auger spectrometer. (Auth.)

  7. Activation of Reactive MALDI Adduct Ions Enables Differentiation of Dihydroxylated Vitamin D Isomers

    Science.gov (United States)

    Qi, Yulin; Müller, Miriam J.; Volmer, Dietrich A.

    2017-12-01

    Vitamin D compounds are secosteroids, which are best known for their role in bone health. More recent studies have shown that vitamin D metabolites and catabolites such as dihydroxylated species (e.g., 1,25- and 24,25-dihydroxyvitamin D3) play key roles in the pathologies of various diseases. Identification of these isomers by mass spectrometry is challenging and currently relies on liquid chromatography, as the isomers exhibit virtually identical product ion spectra under collision induced dissociation conditions. Here, we developed a simple MALDI-CID method that utilizes ion activation of reactive analyte/matrix adducts to distinguish isomeric dihydroxyvitamin D3 species, without the need for chromatography separation or chemical derivatization techniques. Specifically, reactive 1,5-diaminonaphthalene adducts of dihydroxyvitamin D3 compounds formed during MADI were activated and specific cleavages in the secosteroid's backbone structure were achieved that produced isomer-diagnostic fragment ions. [Figure not available: see fulltext.

  8. RIES: Internet voting in action

    NARCIS (Netherlands)

    Hubbers, E.M.G.M.; Jacobs, B.P.F.; Pieters, Wolter

    2004-01-01

    RIES stands for Rijnland Internet Election System. It is an online voting system that was developed by one of the Dutch local authorities on water management. The system has been used twice in the fall of 2004 for in total approximately two million potential voters. In this paper we describe how

  9. RIES: Internet voting in action

    NARCIS (Netherlands)

    Hubbers, E.M.G.M.; Jacobs, B.P.F.; Pieters, Wolter

    2005-01-01

    RIES stands for Rijnland Internet Election System. It is an online voting system that has been used twice in the fall of 2004 for in total over two million potential voters. In this paper we describe how this system works. Furthermore we describe how the system allowed us to independently verify the

  10. Use of reactive gases with broad-beam radio frequency ion sources for industrial applications

    International Nuclear Information System (INIS)

    Schneider, St.; Jolly, T.W.; Kohlstedt, H.; Waser, R.

    2004-01-01

    Broad-beam ion sources are used for a number of important industrial etching and deposition applications, and the use of inductively coupled plasmas has greatly increased the feasibility of using beams of reactive gases, especially of chlorine and oxygen, but also of CO, CO 2 , CF 4 , CHF 3 , SF 6 , etc. In order to gain more understanding of the factors that affect the composition of beams of these gases, we have used a Hiden energy-dispersive quadrupole mass spectrometer to analyze the flux of ions and energetic particles produced by an Oxford Instruments 15 cm rf ion source. For all of the above gases, we have analyzed the effects of changing the operating conditions on the composition of the ion beam, and the fractional production of multiply charged ions; on the plasma potential (and the consequential divergence of the ion beam) and on the spread in energy of the ion beam. We discuss how these factors influence the correct use of the ion source in etching applications with these gases. It is important that the design of the ion source should be optimized for the process gases that are used. The source was originally optimized for use on argon. We discuss the effect of the design on the source's performance with the different gases, and we consider whether design changes would be appropriate for optimum performance on different gases

  11. Single-Run Single-Mask Inductively-Coupled-Plasma Reactive-Ion-Etching Process for Fabricating Suspended High-Aspect-Ratio Microstructures

    Science.gov (United States)

    Yang, Yao-Joe; Kuo, Wen-Cheng; Fan, Kuang-Chao

    2006-01-01

    In this work, we present a single-run single-mask (SRM) process for fabricating suspended high-aspect-ratio structures on standard silicon wafers using an inductively coupled plasma-reactive ion etching (ICP-RIE) etcher. This process eliminates extra fabrication steps which are required for structure release after trench etching. Released microstructures with 120 μm thickness are obtained by this process. The corresponding maximum aspect ratio of the trench is 28. The SRM process is an extended version of the standard process proposed by BOSCH GmbH (BOSCH process). The first step of the SRM process is a standard BOSCH process for trench etching, then a polymer layer is deposited on trench sidewalls as a protective layer for the subsequent structure-releasing step. The structure is released by dry isotropic etching after the polymer layer on the trench floor is removed. All the steps can be integrated into a single-run ICP process. Also, only one mask is required. Therefore, the process complexity and fabrication cost can be effectively reduced. Discussions on each SRM step and considerations for avoiding undesired etching of the silicon structures during the release process are also presented.

  12. Reactive Landing of Gramicidin S and Ubiquitin Ions onto Activated Self-Assembled Monolayer Surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Laskin, Julia; Hu, Qichi

    2017-03-13

    Using mass-selected ion deposition combined with in situ infrared reflection absorption spectroscopy (IRRAS), we examined the reactive landing of gramicidin S and ubiquitin ions onto activated self-assembled monolayer (SAM) surfaces terminated with N-hydroxysuccinimidyl ester (NHS-SAM) and acyl fluoride (COF-SAM) groups. Doubly protonated gramicidin S, [GS+2H]2+, and two charge states of ubiquitin, [U+5H]5+ and [U+13H]13+, were used as model systems, allowing us to explore the effect of the number of free amino groups and the secondary structure on the efficiency of covalent bond formation between the projectile ion and the surface. For all projectile ions, ion deposition resulted in the depletion of IRRAS bands corresponding to the terminal groups on the SAM and the appearance of several new bands not associated with the deposited species. These new bands were assigned to the C=O stretching vibrations of COOH and COO- groups formed on the surface as a result of ion deposition. The presence of these bands was attributed to an alternative reactive landing pathway that competes with covalent bond formation. This pathway with similar yields for both gramicidin S and ubiquitin ions is analogous to the hydrolysis of the NHS ester bond in solution. The covalent bond formation efficiency increased linearly with the number of free amino groups and was found to be lower for the more compact conformation of ubiquitin compared with the fully unfolded conformation. This observation was attributed to the limited availability of amino groups on the surface of the folded conformation. Our results have provided new insights on the efficiency and mechanism of reactive landing of peptides and proteins onto activated SAMs

  13. An initial model for the RIED effect

    International Nuclear Information System (INIS)

    Hodgson, E.R.; Morono, A.

    2000-01-01

    A simple model based on electron acceleration in the conduction band giving rise to an increased F + oxygen vacancy lifetime provides an explanation for several radiation induced electrical degradation (RIED) associated observations in Al 2 O 3 . The increased F + radioluminescence noted during RIED is a direct consequence of the lifetime increase. The model predicts the observed electric field threshold for RIED, and an increase in the field threshold with increasing impurity content. RIED for RF electric fields is also explained. In addition the lifetime increase provides an explanation for the enhanced oxygen vacancy aggregation including colloid and gamma alumina production observed under RIED conditions

  14. Films deposited from reactive sputtering of aluminum acetylacetonate under low energy ion bombardment

    Energy Technology Data Exchange (ETDEWEB)

    Battaglin, Felipe Augusto Darriba; Prado, Eduardo Silva; Cruz, Nilson Cristino da; Rangel, Elidiane Cipriano, E-mail: elidiane@sorocaba.unesp.br [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Sorocaba, SP (Brazil). Lab. de Plasmas Tecnologicos; Caseli, Luciano [Universidade Federal de Sao Paulo (UNIFESP), Diadema, SP (Brazil). Instituto de Ciencias Ambientais, Quimicas e Farmaceuticas; Silva, Tiago Fiorini da; Tabacniks, Manfredo Harri [Universidade de Sao Paulo (USP), SP (Brazil). Instituto de Fisica

    2017-07-15

    Films were deposited from aluminum acetylacetonate (Al(acac)3 ) using a methodology involving reactive sputtering and low energy ion bombardment. The plasma was generated by the application of radiofrequency power to the powder containing electrode and simultaneously, negative pulses were supplied to the electrode where the substrates were attached. It was investigated the effect of the duty cycle of the pulses (Δ) on the properties of the coatings. Association of ion bombardment to the deposition process increased film thickness, structure reticulation and organic content. Ions from the deposition environment were implanted at the film-air interface or underneath it. Morphology and topography were altered depending on Δ. Considering the enhancement of Δ, it affected the flux of ions reaching the depositing interface and then the deposition rate, H content, crosslinking degree and surface microstructure. Alumina groups were detected in the infrared spectra, whereas the precipitation of amorphous alumina was confirmed by X-ray diffraction. (author)

  15. Modeling of altered layer formation during reactive ion etching of GaAs

    Energy Technology Data Exchange (ETDEWEB)

    Mutzke, A. [Max-Planck-Institute of Plasmaphysics, EURATOM Association, D-17491 Greifswald (Germany); Rai, A., E-mail: Abha.Rai@ipp.mpg.de [Max-Planck-Institute of Plasmaphysics, EURATOM Association, D-17491 Greifswald (Germany); Schneider, R.; Angelin, E.J.; Hippler, R. [Institute of Physics, Ernst-Moritz-Arndt-University Greifswald, Felix-Hausdorff-Str.6, D-17489 Greifswald (Germany)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer Experimental result showing the preferential sputtering of GaAs (150 keV Ar{sup +} and thermal O on GaAs) during reactive ion beam etching (RIBE) has been reported. Black-Right-Pointing-Pointer A model based on binary collisions (SDTrimSP) is presented to simulate RIBE. Black-Right-Pointing-Pointer The model is used to explain the reported experimental data and also the results by Grigonis and co-workers [1]. - Abstract: The binary collision based SDTrimSP model has been used to simulate the reactive ion beam etching (RIBE) of GaAs in the presence of energetic Ar ions and thermal O atoms. It includes the collisional effects, diffusive processes and chemical reactions taking place in the system. The model parameters are fitted using the experimental observations of Grigonis and co-workers [1] and validated with the experimental results obtained during the GaAs ion etching presented in this paper. A detailed analysis is presented to understand the effect of the diffusive processes and the role of O during RIBE of GaAs. It is shown how the presence of damage caused by the energetic Ar coupled with the presence of thermal O opens up chemical reaction channels which eventually leads to the preferential sputtering of Ga observed at the ion etching facility at University of Greifswald.

  16. Tuning silver ion release properties in reactively sputtered Ag/TiOx nanocomposites

    Science.gov (United States)

    Xiong, J.; Ghori, M. Z.; Henkel, B.; Strunskus, T.; Schürmann, U.; Deng, M.; Kienle, L.; Faupel, F.

    2017-07-01

    Silver/titania nanocomposites with strong bactericidal effects and good biocompatibility/environmental safety show a high potential for antibacterial applications. Tailoring the silver ion release is thus highly promising to optimize the antibacterial properties of such coatings and to preserve biocompatibility. Reactive sputtering is a fast and versatile method for the preparation of such Ag/TiOx nanocomposites coatings. The present work is concerned with the influence of sputter parameters on the surface morphology and silver ion release properties of reactively sputtered Ag/TiOx nanocomposites coatings showing a silver nanoparticle size distribution in the range from 1 to 20 nm. It is shown that the silver ion release rate strongly depends on the total pressure: the coatings prepared at lower pressure present a lower but long-lasting release behavior. The much denser structure produced under these conditions reduces the transport of water molecules into the coating. In addition, the influence of microstructure and thickness of titanium oxide barriers on the silver ion release were investigated intensively. Moreover, for the coatings prepared at high total pressure, it was demonstrated that stable and long-lasting silver release can be achieved by depositing a barrier with a high rate. Nanocomposites produced under these conditions show well controllable silver ion release properties for applications as antibacterial coatings.

  17. A novel non-sequential hydrogen-pulsed deep reactive ion etching of silicon

    International Nuclear Information System (INIS)

    Gharooni, M; Mohajerzadeh, A; Sandoughsaz, A; Khanof, S; Mohajerzadeh, S; Asl-Soleimani, E

    2013-01-01

    A non-sequential pulsed-mode deep reactive ion etching of silicon is reported that employs continuous etching and passivation based on SF 6 and H 2 gases. The passivation layer, as an important step for deep vertical etching of silicon, is feasible by hydrogen pulses in proper time-slots. By adjusting the etching parameters such as plasma power, H 2 and SF 6 flows and hydrogen pulse timing, the process can be controlled for minimum underetch and high etch-rate at the same time. High-aspect-ratio features can be realized with low-density plasma power and by controlling the reaction chemistry. The so-called reactive ion etching lag has been minimized by operating the reactor at higher pressures. X-ray photoelectron spectroscopy and scanning electron microscopy have been used to study the formation of the passivation layer and the passivation mechanism. (paper)

  18. Mask-free surface structuring of micro- and nanocrystalline diamond films by reactive ion plasma etching

    Czech Academy of Sciences Publication Activity Database

    Domonkos, Mária; Ižák, Tibor; Babchenko, Oleg; Varga, Marián; Hruška, Karel; Kromka, Alexander

    2014-01-01

    Roč. 6, č. 7 (2014), s. 780-784 ISSN 2164-6627 R&D Projects: GA ČR GAP108/12/0910; GA ČR GAP108/12/0996; GA MPO FR-TI2/736 Institutional support: RVO:68378271 Keywords : micro- and nanocrystalline diamond * capacitively coupled plasma * reactive ion etching * nanostructuring * scanning electron microscopy Subject RIV: BM - Solid Matter Physics ; Magnetism

  19. Reactivity of surface of metal oxide particles: from adsorption of ions to deposition of colloidal particles

    International Nuclear Information System (INIS)

    Lefevre, Gregory

    2010-01-01

    In this Accreditation to supervise research (HDR), the author proposes an overview of his research works in the field of chemistry. These works more particularly addressed the understanding of the surface reactivity of metal oxide particles and its implication on sorption and adherence processes. In a first part, he addresses the study of surface acidity-alkalinity: measurement of surface reactivity by acid-base titration, stability of metal oxides in suspension, effect of morphology on oxide-hydroxide reactivity. The second part addresses the study of sorption: reactivity of iron oxides with selenium species, sorption of sulphate ions on magnetite, attenuated total reflection infrared spectroscopy (ATR-IR). Adherence effects are addressed in the third part: development of an experimental device to study adherence in massive substrates, deposition of particles under turbulent flow. The last part presents a research project on the effect of temperature on ion sorption at solids/solutions interfaces, and on the adherence of metal oxide particles. The author gives his detailed curriculum, and indicates his various publications, teaching activities, research and administrative responsibilities

  20. Spatially resolved images of reactive ions in the Orion Bar,★★.

    Science.gov (United States)

    Goicoechea, Javier R; Cuadrado, Sara; Pety, Jérôme; Bron, Emeric; Black, John H; Cernicharo, José; Chapillon, Edwige; Fuente, Asunción; Gerin, Maryvonne

    2017-05-01

    We report high angular resolution (4.9″×3.0″) images of reactive ions SH + , HOC + , and SO + toward the Orion Bar photodissociation region (PDR). We used ALMA-ACA to map several rotational lines at 0.8 mm, complemented with multi-line observations obtained with the IRAM 30 m telescope. The SH + and HOC + emission is restricted to a narrow layer of 2″- to 10″-width (≈800 to 4000 AU depending on the assumed PDR geometry) that follows the vibrationally excited [Formula: see text] emission. Both ions efficiently form very close to the H/H 2 transition zone, at a depth of A v ≲1 mag into the neutral cloud, where abundant C + , S + , and [Formula: see text] coexist. SO + peaks slightly deeper into the cloud. The observed ions have low rotational temperatures ( T rot ≈10-30 K≪ T k ) and narrow line-widths (~2-3 km s -1 ), a factor of ≃2 narrower that those of the lighter reactive ion CH + . This is consistent with the higher reactivity and faster radiative pumping rates of CH + compared to the heavier ions, which are driven relatively faster toward smaller velocity dispersion by elastic collisions and toward lower T rot by inelastic collisions. We estimate column densities and average physical conditions from an excitation model ( n (H 2 )≈10 5 -10 6 cm -3 , n ( e - )≈10 cm -3 , and T k ≈200 K). Regardless of the excitation details, SH + and HOC + clearly trace the most exposed layers of the UV-irradiated molecular cloud surface, whereas SO + arises from slightly more shielded layers.

  1. Ion reactivity of calcium-deficient hydroxyapatite in standard cell culture media.

    Science.gov (United States)

    Gustavsson, J; Ginebra, M P; Engel, E; Planell, J

    2011-12-01

    Solution-mediated surface reactions occur for most calcium phosphate-based biomaterials and may influence cellular response. A reasonable extrapolation of such processes observed in vitro to in vivo performance requires a deep understanding of the underlying mechanisms. We therefore systematically investigated the nature of ion reactivity of calcium-deficient hydroxyapatite (CDHA) by exposing it for different periods of time to standard cell culture media of different chemical composition (DMEM and McCoy medium, with and without osteogenic supplements and serum proteins). Kinetic ion interaction studies of principal extracellular ions revealed non-linear sorption of Ca²⁺ (∼50% sorption) and K⁺ (∼8%) as well as acidification of all media during initial contact with CDHA (48h). Interestingly, inorganic phosphorus (P(i)) was sorbed from McCoy medium (∼50%) or when using osteogenic media containing β-glycerophosphate, but not from DMEM medium. Non-linear sorption data could be perfectly described by pseudo-first-order and pseudo-second-order sorption models. At longer contact time (21 days), and with frequent renewal of culture medium, sorption of Ca²⁺ remained constant throughout the experiment, while sorption of P(i) gradually decreased in McCoy medium. In great contrast, CDHA began to release P(i) slowly with time when using DMEM medium. Infrared spectra showed that CDHA exposed to culture media had a carbonated surface chemistry, suggesting that carbonate plays a key role in the ion reactivity of CDHA. Our data show that different compositions of the aqueous environment may provoke opposite ion reactivity of CDHA, and this must be carefully considered when evaluating the osteoinductive potential of the material. Copyright © 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  2. Process Development for Reactive-Ion Etching of Molybdenum Disulfide (MoS2) Utilizing a Poly(methyl methacrylate) (PMMA) Etch Mask

    Science.gov (United States)

    2017-10-01

    Nichols, Matthew L Chin, Sina Najmaei, Eugene Zakar, and Madan Dubey Sensors and Electron Devices Directorate, ARL Approved for public...EBL; Vistec EBPG5000+) with an exposure dose of 850 μC/cm2 and development in 25 mL of isopropyl alcohol (IPA): 10 mL methyl isobutyl ketone for...deposition EBL electron beam lithography IPA isopropyl alcohol MoS2 molybdenum disulfide O2 oxygen PMMA poly(methyl methacrylate) RIE reactive

  3. Dry fabrication of microdevices by the combination of focused ion beam and cryogenic deep reactive ion etching

    International Nuclear Information System (INIS)

    Chekurov, N; Tittonen, I; Grigoras, K; Sainiemi, L; Franssila, S; Peltonen, A

    2010-01-01

    In this paper, we demonstrate silicon microdevice fabrication by a combination of focused ion beam (FIB) and cryogenic deep reactive ion etching (DRIE). Applying FIB treatment only to a thin surface layer enables very high writing speed compared with FIB milling. The use of DRIE then defines the micro- and nanodevices utilizing the FIB-modified silicon as a mask. We demonstrate the ability to create patterns on highly 3D structures, which is extremely challenging by other nanofabrication methods. The alignment of optically made and FIB-defined patterns is also demonstrated. We also show that complete microelectromechanical systems (MEMS) can be fabricated by this method by presenting a double-ended tuning fork resonator as an example. Extremely short process time is achieved as the full fabrication cycle from mask design to electrical measurements can be completed during one working day.

  4. Ion implantation induced structural changes in reactively sputtered Cr-N layers on Si substrates

    International Nuclear Information System (INIS)

    Novakovic, M.; Popovic, M.; Perusko, D.; Milinovic, V.; Radovic, I.; Bibic, N.; Mitric, M.; Milosavljevic, M.

    2007-01-01

    This paper presents a study of the structure and composition of reactively sputtered Cr-N layers as a function of deposition parameters, and the effects of ion implantation on these structures. The layers were deposited on (1 0 0) Si substrates to a thickness of 240-280 nm, at different nitrogen partial pressure, and subsequently irradiated with 120 keV Ar ions. Structural characterisation of the samples was performed with Rutherford backscattering spectroscopy, transmission electron microscopy and X-ray diffraction analysis. We also measured their electrical resistivity with a four point probe. It was found that the layers grow in form of columnar structures, and their composition, Cr 2 N or CrN, strongly depends on the nitrogen partial pressure during deposition. Ion irradiation induces local micro-structural changes, formation of nano-particles and defects, which can be nicely correlated to the measured electrical resistivity

  5. The fabrication of silicon nanostructures by local gallium implantation and cryogenic deep reactive ion etching

    International Nuclear Information System (INIS)

    Chekurov, N; Grigoras, K; Franssila, S; Tittonen, I; Peltonen, A

    2009-01-01

    We show that gallium-ion-implanted silicon serves as an etch mask for fabrication of high aspect ratio nanostructures by cryogenic plasma etching (deep reactive ion etching). The speed of focused ion beam (FIB) patterning is greatly enhanced by the fact that only a thin approx. 30 nm surface layer needs to be modified to create a mask for the etching step. Etch selectivity between gallium-doped and undoped material is at least 1000:1, greatly decreasing the mask erosion problems. The resolution of the combined FIB-DRIE process is 20 lines μm -1 with the smallest masked feature size of 40 nm. The maximum achieved aspect ratio is 15:1 (e.g. 600 nm high pillars 40 nm in diameter).

  6. Spatially-Resolved Ion Trajectory Measurements During Cl2 Reactive Ion Beam Etching and Ar Ion Beam Etching

    International Nuclear Information System (INIS)

    Vawter, G. Allen; Woodworth, Joseph R.; Zubrzycki, Walter J.

    1999-01-01

    The angle of ion incidence at the etched wafer location during RIBE and IBE using Cl 2 , Ar and O 2 ion beams has been characterized using an ion energy and angle analyzer. Effects of beam current and accelerator grid bias on beam divergence and the spatial uniformity of the spread of incident angles are measured. It is observed that increased total beam current can lead to reduced current density at the sample stage due to enhanced beam divergence at high currents. Results are related to preferred etch system design for uniform high-aspect-ratio etching across semiconductor wafers

  7. A new concept for spatially divided Deep Reactive Ion Etching with ALD-based passivation

    International Nuclear Information System (INIS)

    Roozeboom, F; Kniknie, B; Lankhorst, A M; Winands, G; Knaapen, R; Smets, M; Poodt, P; Dingemans, G; Keuning, W; Kessels, W M M

    2012-01-01

    Conventional Deep Reactive Ion Etching (DRIE) is a plasma etch process with alternating half-cycles of 1) Si-etching with SF 6 to form gaseous SiF x etch products, and 2) passivation with C 4 F 8 that polymerizes as a protecting fluorocarbon deposit on the sidewalls and bottom of the etched features. In this work we report on a novel alternative and disruptive technology concept of Spatially-divided Deep Reactive Ion Etching, S-DRIE, where the process is converted from the time-divided into the spatially divided regime. The spatial division can be accomplished by inert gas bearing 'curtains' of heights down to ∼20 μm. These curtains confine the reactive gases to individual (often linear) injection slots constructed in a gas injector head. By horizontally moving the substrate back and forth under the head one can realize the alternate exposures to the overall cycle. A second improvement in the spatially divided approach is the replacement of the CVD-based C 4 F 8 passivation steps by ALD-based oxide (e.g. SiO 2 ) deposition cycles. The method can have industrial potential in cost-effective creation of advanced 3D interconnects (TSVs), MEMS manufacturing and advanced patterning, e.g., in nanoscale transistor line edge roughness using Atomic Layer Etching.

  8. Fabrication of antireflective nanostructures for crystalline silicon solar cells by reactive ion etching

    International Nuclear Information System (INIS)

    Lin, Hsin-Han; Chen, Wen-Hua; Wang, Chi-Jen; Hong, Franklin Chau-Nan

    2013-01-01

    In this study we have fabricated large-area (15 × 15 cm 2 ) subwavelength antireflection structure on poly-Si substrates to reduce their solar reflectivity. A reactive ion etching system was used to fabricate nanostructures on the poly-silicon surface. Reactive gases, composed of chlorine (Cl 2 ), sulfur hexafluoride (SF 6 ) and oxygen (O 2 ), were activated to fabricate nanoscale pyramids by RF plasma. The poly-Si substrates were etched in various gas compositions for 6–10 min to form nano-pyramids. The sizes of pyramids were about 200–300 nm in heights and about 100 nm in width. Besides the nanoscale features, the high pyramid density on the poly-Si surface is another important factor to reduce the reflectivity. Low-reflectivity surface was fabricated with reflectivity significantly reduced down to < 2% for photons in a wavelength range of 500–900 nm. - Highlights: ► Large-area (15 × 15 cm 2 ) antireflection structures fabricated on poly-Si substrates ► Si nano-pyramids produced by utilizing self-masked reactive ion etching process ► High density of nanoscale pyramids was formed on the entire substrate surface. ► Surface reflectivity below 2% was achieved in the wavelength range of 500–900 nm

  9. Reactivities of some thiol collectors and their interactions with Ag (+1) ion by molecular modeling

    International Nuclear Information System (INIS)

    Yekeler, Hulya; Yekeler, Meftuni

    2004-01-01

    The most commonly used collectors for sulfide minerals in the mining industry are the thiol collectors for the recovery of these minerals from their associated gangues by froth flotation. For this reason, a great deal of attention has been paid to understand the attachment mechanism of thiol collectors to metal sulfide surfaces. The density functional theory (DFT) calculations at the B3LYP/3-21G* and B3LYP/6-31++G** levels were employed to propose the flotation responses of these thiol collectors, namely, diethyl dithiocarbamate, ethyl dithiocarbamate, ethyl dithiocarbonate, ethyl trithiocarbonate and ethyl dithiophosphate ions, and to study the interaction energies of these collectors with Ag (+1) ion in connection to acanthite (Ag 2 S) mineral. The calculated interaction energies, ΔE, were interpreted in terms of the highest occupied molecular orbital (HOMO) energies of the isolated collector ions. The results show that the HOMOs are strongly localized to the sulfur atoms and the HOMO energies can be used as a reactivity descriptor for the flotation ability of the thiol collectors. Using the HOMO and ΔE energies, the reactivity order of the collectors is found to be (C 2 H 5 ) 2 NCS 2 - > C 2 H 5 NHCS 2 - > C 2 H 5 OCS 2 - > C 2 H 5 SCS 2 - > (C 2 H 5 O)(OH)PS 2 - . The theoretically obtained results are in good agreement with the experimental data reported

  10. Periodic arrays of deep nanopores made in silicon with reactive ion etching and deep UV lithography

    International Nuclear Information System (INIS)

    Woldering, Leon A; Tjerkstra, R Willem; Vos, Willem L; Jansen, Henri V; Setija, Irwan D

    2008-01-01

    We report on the fabrication of periodic arrays of deep nanopores with high aspect ratios in crystalline silicon. The radii and pitches of the pores were defined in a chromium mask by means of deep UV scan and step technology. The pores were etched with a reactive ion etching process with SF 6 , optimized for the formation of deep nanopores. We have realized structures with pitches between 440 and 750 nm, pore diameters between 310 and 515 nm, and depth to diameter aspect ratios up to 16. To the best of our knowledge, this is the highest aspect ratio ever reported for arrays of nanopores in silicon made with a reactive ion etching process. Our experimental results show that the etching rate of the nanopores is aspect-ratio-dependent, and is mostly influenced by the angular distribution of the etching ions. Furthermore we show both experimentally and theoretically that, for sub-micrometer structures, reducing the sidewall erosion is the best way to maximize the aspect ratio of the pores. Our structures have potential applications in chemical sensors, in the control of liquid wetting of surfaces, and as capacitors in high-frequency electronics. We demonstrate by means of optical reflectivity that our high-quality structures are very well suited as photonic crystals. Since the process studied is compatible with existing CMOS semiconductor fabrication, it allows for the incorporation of the etched arrays in silicon chips

  11. Knudsen and inverse Knudsen layer effect on tail ion distribution and fusion reactivity in inertial confinement fusion targets

    Science.gov (United States)

    McDevitt, C. J.; Tang, X.-Z.; Guo, Z.; Berk, H. L.

    2014-10-01

    A series of reduced models are used to study the fast ion tail in the vicinity of a transition layer between plasmas at disparate temperatures and densities, which is typical of the gas-pusher interface in inertial confinement fusion targets. Emphasis is placed on utilizing progressively more comprehensive models in order to identify the essential physics for computing the fast ion tail at energies comparable to the Gamow peak. The resulting fast ion tail distribution is subsequently used to compute the fusion reactivity as a function of collisionality and temperature. It is found that while the fast ion distribution can be significantly depleted in the hot spot, leading to a reduction of the fusion reactivity in this region, a surplus of fast ions is present in the neighboring cold region. The presence of this fast ion surplus in the neighboring cold region is shown to lead to a partial recovery of the fusion yield lost in the hot spot.

  12. Formation of metal nanoparticles by short-distance sputter deposition in a reactive ion etching chamber

    International Nuclear Information System (INIS)

    Nie Min; Meng, Dennis Desheng; Sun Kai

    2009-01-01

    A new method is reported to form metal nanoparticles by sputter deposition inside a reactive ion etching chamber with a very short target-substrate distance. The distribution and morphology of nanoparticles are found to be affected by the distance, the ion concentration, and the sputtering time. Densely distributed nanoparticles of various compositions were fabricated on the substrates that were kept at a distance of 130 μm or smaller from the target. When the distance was increased to 510 μm, island structures were formed, indicating the tendency to form continuous thin film with longer distance. The observed trend for nanoparticle formation is opposite to the previously reported mechanism for the formation of nanoparticles by sputtering. A new mechanism based on the seeding effect of the substrate is proposed to interpret the experimental results.

  13. Nano-patterning of perpendicular magnetic recording media by low-energy implantation of chemically reactive ions

    International Nuclear Information System (INIS)

    Martin-Gonzalez, M.S.; Briones, F.; Garcia-Martin, J.M.; Montserrat, J.; Vila, L.; Faini, G.; Testa, A.M.; Fiorani, D.; Rohrmann, H.

    2010-01-01

    Magnetic nano-patterning of perpendicular hard disk media with perpendicular anisotropy, but preserving disk surface planarity, is presented here. Reactive ion implantation is used to locally modify the chemical composition (hence the magnetization and magnetic anisotropy) of the Co/Pd multilayer in irradiated areas. The procedure involves low energy, chemically reactive ion irradiation through a resist mask. Among N, P and As ions, P are shown to be most adequate to obtain optimum bit density and topography flatness for industrial Co/Pd multilayer media. The effect of this ion contributes to isolate perpendicular bits by destroying both anisotropy and magnetic exchange in the irradiated areas. Low ion fluences are effective due to the stabilization of atomic displacement levels by the chemical effect of covalent impurities.

  14. Reactivities of some thiol collectors and their interactions with Ag (+1) ion by molecular modeling

    Energy Technology Data Exchange (ETDEWEB)

    Yekeler, Hulya; Yekeler, Meftuni

    2004-09-15

    The most commonly used collectors for sulfide minerals in the mining industry are the thiol collectors for the recovery of these minerals from their associated gangues by froth flotation. For this reason, a great deal of attention has been paid to understand the attachment mechanism of thiol collectors to metal sulfide surfaces. The density functional theory (DFT) calculations at the B3LYP/3-21G* and B3LYP/6-31++G** levels were employed to propose the flotation responses of these thiol collectors, namely, diethyl dithiocarbamate, ethyl dithiocarbamate, ethyl dithiocarbonate, ethyl trithiocarbonate and ethyl dithiophosphate ions, and to study the interaction energies of these collectors with Ag (+1) ion in connection to acanthite (Ag{sub 2}S) mineral. The calculated interaction energies, {delta}E, were interpreted in terms of the highest occupied molecular orbital (HOMO) energies of the isolated collector ions. The results show that the HOMOs are strongly localized to the sulfur atoms and the HOMO energies can be used as a reactivity descriptor for the flotation ability of the thiol collectors. Using the HOMO and {delta}E energies, the reactivity order of the collectors is found to be (C{sub 2}H{sub 5}){sub 2}NCS{sub 2}{sup -} > C{sub 2}H{sub 5}NHCS{sub 2}{sup -} > C{sub 2}H{sub 5}OCS{sub 2}{sup -} > C{sub 2}H{sub 5}SCS{sub 2}{sup -} > (C{sub 2}H{sub 5}O)(OH)PS{sub 2}{sup -}. The theoretically obtained results are in good agreement with the experimental data reported.

  15. Impact of fluorine based reactive chemistry on structure and properties of high moment magnetic material

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Xiaoyu, E-mail: xiaoyu.yang@wdc.com; Chen, Lifan; Han, Hongmei; Fu, Lianfeng; Sun, Ming; Liu, Feng; Zhang, Jinqiu [Western Digital Corporation, 44100 Osgood Road, Fremont, California 94539 (United States)

    2014-05-07

    The impact of the fluorine-based reactive ion etch (RIE) process on the structural, electrical, and magnetic properties of NiFe and CoNiFe-plated materials was investigated. Several techniques, including X-ray fluorescence, 4-point-probe, BH looper, transmission electron microscopy (TEM), and electron energy loss spectroscopy (EELS), were utilized to characterize both bulk film properties such as thickness, average composition, Rs, ρ, Bs, Ms, and surface magnetic “dead” layers' properties such as thickness and element concentration. Experimental data showed that the majority of Rs and Bs changes of these bulk films were due to thickness reduction during exposure to the RIE process. ρ and Ms change after taking thickness reduction into account were negligible. The composition of the bulk films, which were not sensitive to surface magnetic dead layers with nano-meter scale, showed minimum change as well. It was found by TEM and EELS analysis that although both before and after RIE there were magnetic dead layers on the top surface of these materials, the thickness and element concentration of the layers were quite different. Prior to RIE, dead layer was actually native oxidation layers (about 2 nm thick), while after RIE dead layer consisted of two sub-layers that were about 6 nm thick in total. Sub-layer on the top was native oxidation layer, while the bottom layer was RIE “damaged” layer with very high fluorine concentration. Two in-situ RIE approaches were also proposed and tested to remove such damaged sub-layers.

  16. Reactivity of two hydrate forms of europium(3) ethylenediaminetetraacetate in the processes of central ion substitution

    International Nuclear Information System (INIS)

    Nikitenko, S.I.; Martynenko, L.I.; Pechurova, N.I.

    1985-01-01

    Kinetics of central ion substitution in the system EuA - -Cu 2+ , where A 4- -ethylenediaminetetraacetate (pH 6.0, t=25-55 deg C), has been studied spectrophotometrically. It is shown, that the form EuA(H 2 O) 3 - is more reactive as compared with EuA(H 2 O) 2 - . It is found, that equilibrium constant of the process EuA(H 2 O) 3 - reversible EuA(H 2 O) 2 - (1) equals 1 at t=36.2 deg C. The values ΔH and ΔS of the process (1), constituting 13.0+-3.2 kJ/mol and 41.8+-5.5 J/molxdeg respectively, are calculated

  17. Reactive ion beam etching for microcavity surface emitting laser fabrication: technology and damage characterization

    International Nuclear Information System (INIS)

    Matsutani, A.; Tadokoro, T.; Koyama, F.; Iga, K.

    1993-01-01

    Reactive ion beam etching (RIBE) is an effective dry etching technique for the fabrication of micro-sized surface emitting (SE) lasers and optoelectronic devices. In this chapter, some etching characteristics for GaAs, InP and GaInAsP with a Cl 2 gas using an RIBE system are discussed. Micro-sized circular mesas including GaInAsP/InP multilayers with vertical sidewalls were fabricated. RIBE-induced damage in InP substrates was estimated by C-V and PL measurement. In addition, the removal of the induced damage by the second RIBE with different conditions for the InP wafer was proposed. The sidewall damage is characterized by photoluminescence emitted from the etched sidewall of a GaInAsP/InP DH wafer. (orig.)

  18. New Colloidal Lithographic Nanopatterns Fabricated by Combining Pre-Heating and Reactive Ion Etching

    Directory of Open Access Journals (Sweden)

    Cong Chunxiao

    2009-01-01

    Full Text Available Abstract We report a low-cost and simple method for fabrication of nonspherical colloidal lithographic nanopatterns with a long-range order by preheating and oxygen reactive ion etching of monolayer and double-layer polystyrene spheres. This strategy allows excellent control of size and morphology of the colloidal particles and expands the applications of the colloidal patterns as templates for preparing ordered functional nanostructure arrays. For the first time, various unique nanostructures with long-range order, including network structures with tunable neck length and width, hexagonal-shaped, and rectangular-shaped arrays as well as size tunable nanohole arrays, were fabricated by this route. Promising potentials of such unique periodic nanostructures in various fields, such as photonic crystals, catalysts, templates for deposition, and masks for etching, are naturally expected.

  19. Description and analysis of the RIES Internet voting system

    NARCIS (Netherlands)

    Hubbers, E.; Jacobs, B.P.F.; Schoenmakers, B.; Tilborg, van H.C.A.; Weger, de B.M.M.

    2008-01-01

    RIES is an evolving family of systems (RIES-2004, RIES-KOA, RIES-2008) for electronic elections via the Internet. It has been used in practice for medium scale elections for the Dutch District Water Control Boards and for expatriates in national parliament elections. We describe and analyze the

  20. Fabrication of electrocatalytic Ta nanoparticles by reactive sputtering and ion soft landing

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Grant E.; Moser, Trevor; Engelhard, Mark; Browning, Nigel D.; Laskin, Julia

    2016-11-07

    About 40 years ago, it was shown that tungsten carbide exhibits similar catalytic behavior to Pt for certain commercially relevant reactions, thereby suggesting the possibility of cheaper and earth-abundant substitutes for costly and rare precious metal catalysts. In this work, reactive magnetron sputtering of Ta in the presence of three model hydrocarbons (2-butanol, heptane, and m-xylene) combined with gas aggregation and ion soft landing was employed to prepare organic-inorganic hybrid nanoparticles (NPs) on surfaces for evaluation of catalytic activity and durability. The electro-catalytic behavior of the NPs supported on glassy carbon was evaluated in acidic aqueous solution by cyclic voltammetry. The Ta-heptane and Ta-xylene NPs were revealed to be active and robust toward promotion of the oxygen reduction reaction, an important process occurring at the cathode in fuel cells. In comparison, pure Ta and Ta-butanol NPs were essentially unreactive. Characterization techniques including atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM) were applied to probe how different sputtering conditions such as the flow rates of gases, sputtering current, and aggregation length affect the properties of the NPs. AFM images reveal the focused size of the NPs as well as their preferential binding along the step edges of graphite surfaces. In comparison, TEM images of the same NPs on carbon grids show that they bind randomly to the surface with some agglomeration but little coalescence. The TEM images also reveal morphologies with crystalline cores surrounded by amorphous regions for NPs formed in the presence of 2-butanol and heptane. In contrast, NPs formed in the presence of m-xylene are amorphous throughout. XPS spectra indicate that while the percentage of Ta, C, and O in the NPs varies depending on the sputtering conditions and hydrocarbon employed, the electron binding energies of the elements are similar

  1. Ion Internal Excitation and Co++ 2 Reactivity: Effect On The Titan, Mars and Venus Ionospheric Chemistry

    Science.gov (United States)

    Nicolas, C.; Zabka, J.; Thissen, R.; Dutuit, O.; Alcaraz, C.

    In planetary ionospheres, primary molecular and atomic photoions can be produced with substantial electronic and vibrational internal energy. In some cases, this is known to strongly affect both the rate constants and the branching ratio between the reac- tion products. A previous experimental study (Nicolas et al.) made at the Orsay syn- chrotron radiation facility has shown that many endothermic charge transfer reactions which were not considered in the ionospheric chemistry models of Mars, Venus and Earth have to be included because they are driven by electronic excitation of the parent ions. New measurements on two important reactions for Titan and Mars ionospheres, N+ + CH4 and O+ + CO2, will be presented. Branching ratios between products are very different when the parent atomic ions are prepared in their ground states, N+(3P) and O+(4S), or in their first electronic metastable states N+(1D) and O+(2D or P). 2 As the lifetime of these states are long enough, they survive during the mean time be- tween two collisions in the ionospheric conditions. So, the reactions of these excited states must be included in the ionospheric models. Absolute cross section measurements of the reactivity of stable doubly charged molec- ular ions CO++ and their implications for the Martian ionosphere will also be pre- 2 sented. The molecular dication CO++ production by VUV photoionisation and elec- 2 tron impact in the upper ionosphere of Mars is far from being negligible. However, to determine its concentration, it was necessary to evaluate the major loss channels of these ions. For this purpose, we measured the absolute reaction cross section of the sta- ble dications with CO2, the major neutral species of the Mars ionosphere. CO++ ions 2 were produced either by photoionisation or by electron impact, and a reaction cross section of 45 Å2 with 13CO2 was measured. The reaction leads to charge transfer or to collision induced dissociation. These results were integrated in a model

  2. Streptococcus mutans-induced secondary caries adjacent to glass ionomer cement, composite resin and amalgam restorations in vitro Cárie secundária adjacente a restaurações de cimento de ionômero de vidro, resina composta e amálgama induzida por Streptococcus mutans in vitro

    Directory of Open Access Journals (Sweden)

    Adriana Gama-Teixeira

    2007-12-01

    Full Text Available The aim of this study was to define, in vitro, the potential to inhibit secondary caries of restorative materials currently used in dental practice. Standard cavities were prepared on the buccal and lingual surfaces of fifty extracted human third molars. The teeth were randomly divided into five groups, each one restored with one of the following materials: glass ionomer cement (GIC; amalgam; light-cured composite resin; ion-releasing composite; and light-cured, fluoride-containing composite resin. The teeth were thermocycled, sterilized with gamma irradiation, exposed to a cariogenic challenge using a bacterial system using Streptococcus mutans, and then prepared for microscopic observation. The following parameters were measured in each lesion formed: extension, depth, and caries inhibition area. The outer lesions developed showed an intact surface layer and had a rectangular shape. Wall lesions were not observed inside the cavities. After Analysis of Variance and Component of Variance Models Analysis, it was observed that the GIC group had the smallest lesions and the greatest number of caries inhibition areas. The lesions developed around Amalgam and Ariston pHc restorations had an intermediate size and the largest lesions were observed around Z-100 and Heliomolar restorations. It may be concluded that the restorative materials GIC, amalgam and ion-releasing composites may reduce secondary caries formation.O objetivo deste estudo foi definir, in vitro, o potencial de materiais restauradores, usados rotineiramente na prática clínica, na inibição da cárie secundária. Cavidades padronizadas foram preparadas nas faces vestibulares e linguais de 50 terceiros molares humanos extraídos. Os dentes foram divididos aleatoriamente em 5 grupos, cada um restaurado com um dos seguintes materiais: cimento de ionômero de vidro (CIV; amálgama; resina composta fotopolimerizável; compósito que libera íons, e resina composta fotopolimeriz

  3. Lanthanide ions (III) as sensitizers of melatonin oxidation in reaction mixtures providing reactive species of oxygen and nitrogen

    Energy Technology Data Exchange (ETDEWEB)

    Kaczmarek, Małgorzata, E-mail: mkaczmar@amu.edu.pl

    2015-06-15

    Chemiluminescence (CL) of the reactive systems providing strong oxidants (reactive species of oxygen and nitrogen) containing lanthanide ions (III) and melatonin, was studied. Kinetic curves of emission decay and spectral distributions of chemiluminescence were obtained. Analysis of differences in the intensity of chemiluminescence and CL spectra proved that excitation of Tb(III) and Dy(III) ions takes place with the energy transfer from the products of melatonin oxidation: N{sup 1}-acetyl-N{sup 2}-formyl-5-methoxykynuramine (AFMK) and N{sup 1}-acetyl-5-methoxykynuramine (AMK) to the lanthanide ions. In the system Fe(II)/Fe(III)–H{sub 2}O{sub 2}–Mel–Tb(III) a linear correlation was established between the integrated CL intensity and melatonin concent. - Highlights: • Chemiluminescence (CL) of melatonin (Mel) oxidation by reactive species of oxygen and nitrogen. • Tb(III) and Dy(III) ions as sensitizers of a melatonin oxidation process. • New CL method for determination of melatonin in pharmaceutical preparations based on CL of Fe(II)/Fe(III)–H{sub 2}O{sub 2}–Mel–Tb(III) system.

  4. Deep reactive ion etching of auxetic structures: present capabilities and challenges

    International Nuclear Information System (INIS)

    Muslija, Alban; Díaz Lantada, Andrés

    2014-01-01

    Auxetic materials (or metamaterials) have negative Poisson ratios (NPR) and display the unexpected properties of lateral expansion when stretched, and equal and opposing densification when compressed. Such auxetic materials are being used more frequently in the development of novel products, especially in the fields of intelligent expandable actuators, shape-morphing structures and minimally invasive implantable devices. Although several micromanufacturing technologies have already been applied to the development of auxetic materials and devices, additional precision is needed to take full advantage of their special mechanical properties. In this study, we present a very promising approach for the development of auxetic materials and devices based on the use of deep reactive ion etching (DRIE). The process stands out for its precision and its potential applications to mass production. To our knowledge, it represents the first time this technology has been applied to the manufacture of auxetic materials with nanometric details. We take into account the present capabilities and challenges linked to the use of DRIE in the development of auxetic materials and auxetic-based devices. (technical note)

  5. Plasma diagnostics with electrostatic probes in the reactive low voltage ion plating process

    International Nuclear Information System (INIS)

    Lechleitner, T.; Huber, D.; Pulker, H.K.

    2002-01-01

    The analysis of cold plasmas, which are used in thin film coating techniques, is mainly important for the understanding of the correlation between the film properties and the plasma (or the process) parameters. With the knowledge of these correlations, one is able to optimise and eventually improve the coating processes for the production of films with certain desirable properties. The plasma for the reactive-low-voltage-ion-plating processes is a cold non-isothermal plasma produced by a low-pressure dc non-self sustained arc discharge, controlled by two main parameters, the arc current and the total gas pressure in the chamber. It was shown that the arc current is in a direct linear relation to the degree of ionization and the increase of the total gas pressure has a contrary effect. Besides, it was also demonstrated, that the usage of electrostatic probes for the plasma analysis od deposition processes is a powerful tool to complete the common plasma monitor measurements (energy analysing quadrupol mass spectrometer) and to improve the understanding of industrially used plasma. (nevyjel)

  6. In-situ reactive glow discharge cleaning of NSLS distributed ion pumps

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, E.D.; Chou, T.S.

    1988-01-01

    Based on our experience with the in-situ cleaning of optical systems by reactive r.f. glow discharges and the conditioning and preparation of distributed ion pump (DIP) elements, we have sought to develop strategies for recovering from severe vacuum accidents by restoring DIP elements of storage rings such as those at the NSLS in-situ. In this paper we will describe a series of experiments conducted in a test apparatus to condition a so called ''egg-crate'' DIP in-situ, (this older type element being common in older storage rings). A new untreated element which was unable to pump below 5x10 /sup /minus/8/ Torr in its initial condition was treated in oxygen and subsequent argon r.f. discharges utilizing the pump element as the discharge electrode producing a nitrogen pumping speed of 168 l/s at 2x10 /sup /minus/8/ Torr. A light bake at 75/degree/C increased this to nearly 500 l/s at 5x10 /sup /minus/8/ Torr. After exposure to atmosphere the speed was reduced to nil at these pressures but subsequently recovered, without bakeout, by glow discharge cleaning. 22 refs., 6 figs.

  7. The formation and reactivity of the μ+ molecular ion NeMu+

    International Nuclear Information System (INIS)

    Fleming, D.G.; Mikula, R.J.; Senba, M.; Garner, D.M.; Arseneau, D.J.

    1983-06-01

    Evidence for the formation and reactivity of the positive muon molecular ion NeMu + at room temperature in a low pressure Ne moderator to which trace amounts of Xe, CH 4 , NH 3 or He have been added, is reported. A two component relaxation of the diamagnetic muon spin rotation (μSR) signal is seen upon the addition of trace amounts of Xe to Ne; a fast relaxing component with bimolecular rate constant (3.6+-0.6) x 10 -10 cc atom -1 s -1 is thought to be due to thermal muonium formation in a charge exchange process while the other slow relaxing component is attributed to a muon transfer reaction, as in proton transfer studies. With CH 4 or NH 3 added to Ne there is, at most, only a very slow relaxation seen, even though thermal muonium formation is expected, in analogy with Xe. These latter results may be due to very fast, possibly tunneling-assisted, muon transfer reactions, the first time that such processes have been at all characterized

  8. Production of chemically reactive radioactive ion beams through on-line separation

    International Nuclear Information System (INIS)

    Joinet, A.

    2003-10-01

    The ISOL (isotope separation on line) allows the production of secondary radioactive ion beams through spallation or fragmentation or fission reactions that take place in a thick target bombarded by a high intensity primary beam. The challenge is to increase the intensity and purity of the radioactive beam. The optimization of the system target/source requires the right choice of material for the target by taking into account the stability of the material, its reactivity and the ionization method used. The target is an essential part of the system because radioactive elements are generated in it and are released more or less quickly. Tests have been made in order to select the best fitted material for the release of S, Se, Te, Ge and Sn. Materials tested as target filling are: ZrO 2 , Nb, Ti, V,TiO 2 , CeO x , ThO 2 , C, ZrC 4 and VC). Other molecules such as: COSe, COS, SeS, COTe, GeS, SiS, SnS have been studied to ease the extraction of recoil nuclei (Se, S, Te, Ge and Sn) produced inside the target

  9. Mercuric ions inhibit mitogen-activated protein kinase dephosphorylation by inducing reactive oxygen species

    International Nuclear Information System (INIS)

    Haase, Hajo; Engelhardt, Gabriela; Hebel, Silke; Rink, Lothar

    2011-01-01

    Mercury intoxication profoundly affects the immune system, in particular, signal transduction of immune cells. However, the mechanism of the interaction of mercury with cellular signaling pathways, such as mitogen activated protein kinases (MAPK), remains elusive. Therefore, the objective of this study is to investigate three potential ways in which Hg 2+ ions could inhibit MAPK dephosphorylation in the human T-cell line Jurkat: (1) by direct binding to phosphatases; (2) by releasing cellular zinc (Zn 2+ ); and (3) by inducing reactive oxygen species (ROS). Hg 2+ causes production of ROS, measured by dihydrorhodamine 123, and triggers ROS-mediated Zn 2+ release, detected with FluoZin-3. Yet, phosphatase-inhibition is not mediated by binding of Zn 2+ or Hg 2+ . Rather, phosphatases are inactivated by at least two forms of thiol oxidation; initial inhibition is reversible with reducing agents such as Tris(2-carboxyethyl)phosphine. Prolonged inhibition leads to non-reversible phosphatase oxidation, presumably oxidizing the cysteine thiol to sulfinic- or sulfonic acid. Notably, phosphatases are a particularly sensitive target for Hg 2+ -induced oxidation, because phosphatase activity is inhibited at concentrations of Hg 2+ that have only minor impact on over all thiol oxidation. This phosphatase inhibition results in augmented, ROS-dependent MAPK phosphorylation. MAPK are important regulators of T-cell function, and MAPK-activation by inhibition of phosphatases seems to be one of the molecular mechanisms by which mercury affects the immune system.

  10. In-situ reactive glow discharge cleaning of NSLS distributed ion pumps

    International Nuclear Information System (INIS)

    Johnson, E.D.; Chou, T.S.

    1988-01-01

    Based on our experience with the in-situ cleaning of optical systems by reactive r.f. glow discharges and the conditioning and preparation of distributed ion pump (DIP) elements, we have sought to develop strategies for recovering from severe vacuum accidents by restoring DIP elements of storage rings such as those at the NSLS in-situ. In this paper we will describe a series of experiments conducted in a test apparatus to condition a so called ''egg-crate'' DIP in-situ, (this older type element being common in older storage rings). A new untreated element which was unable to pump below 5x10 /sup /minus/8/ Torr in its initial condition was treated in oxygen and subsequent argon r.f. discharges utilizing the pump element as the discharge electrode producing a nitrogen pumping speed of 168 l/s at 2x10 /sup /minus/8/ Torr. A light bake at 75/degree/C increased this to nearly 500 l/s at 5x10 /sup /minus/8/ Torr. After exposure to atmosphere the speed was reduced to nil at these pressures but subsequently recovered, without bakeout, by glow discharge cleaning. 22 refs., 6 figs

  11. Laser damage resistance of hafnia thin films deposited by electron beam deposition, reactive low voltage ion plating, and dual ion beam sputtering

    International Nuclear Information System (INIS)

    Gallais, Laurent; Capoulade, Jeremie; Natoli, Jean-Yves; Commandre, Mireille; Cathelinaud, Michel; Koc, Cian; Lequime, Michel

    2008-01-01

    A comparative study is made of the laser damage resistance of hafnia coatings deposited on fused silica substrates with different technologies: electron beam deposition (from Hf or HfO2 starting material), reactive low voltage ion plating, and dual ion beam sputtering.The laser damage thresholds of these coatings are determined at 1064 and 355 nm using a nanosecond pulsed YAG laser and a one-on-one test procedure. The results are associated with a complete characterization of the samples: refractive index n measured by spectrophotometry, extinction coefficient k measured by photothermal deflection, and roughness measured by atomic force microscopy

  12. As Narrativas das Séries Policiais

    OpenAIRE

    Camila Prado Furuzawa

    2013-01-01

    Este artigo tem como objetivo analisar e discutir os diferentes tipos de narrativas existentes nas séries policiais atuais, como eles se estruturam, suas técnicas e quais são os elementos fundamentais para sua composição, com ênfase para o realismo e a figura do herói. Estabelecendo também relações com atualidade na qual elas estão inseridas e por fim destacando algumas séries representativas de cada tipo de narrativa.

  13. As Narrativas das Séries Policiais

    Directory of Open Access Journals (Sweden)

    Camila Prado Furuzawa

    2013-12-01

    Full Text Available Este artigo tem como objetivo analisar e discutir os diferentes tipos de narrativas existentes nas séries policiais atuais, como eles se estruturam, suas técnicas e quais são os elementos fundamentais para sua composição, com ênfase para o realismo e a figura do herói. Estabelecendo também relações com atualidade na qual elas estão inseridas e por fim destacando algumas séries representativas de cada tipo de narrativa.

  14. MaRIE Undulator & XFEL Systems

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Dinh Cong [Los Alamos National Laboratory; Marksteiner, Quinn R. [Los Alamos National Laboratory; Anisimov, Petr Mikhaylovich [Los Alamos National Laboratory; Buechler, Cynthia Eileen [Los Alamos National Laboratory

    2015-03-23

    The 22 slides in this presentation treat the subject under the following headings: MaRIE XFEL Performance Parameters, Input Electron Beam Parameters, Undulator Design, Genesis Simulations, Risks, and Summary It is concluded that time-dependent Genesis simulations show the MaRIE XFEL can deliver the number of photons within the required bandwidth, provided a number of assumptions are met; the highest risks are associated with the electron beam driving the XFEL undulator; and risks associated with the undulator and/or distributed seeding technique may be evaluated or retired by performing early validation experiments.

  15. Silicon germanium as a novel mask for silicon deep reactive ion etching

    KAUST Repository

    Serry, Mohamed Y.

    2013-10-01

    This paper reports on the use of p-type polycrystalline silicon germanium (poly-Si1-xGex) thin films as a new masking material for the cryogenic deep reactive ion etching (DRIE) of silicon. We investigated the etching behavior of various poly-Si1-xGex:B (01:800). Furthermore, the SiGe mask was etched in SF6/O2 plasma at temperatures ≥ - 80°C and at rates exceeding 8 μm/min (i.e., more than 37 times faster than SiO2 or SiN masks). Because of the chemical and thermodynamic stability of the SiGe film as well as the electronic properties of the mask, it was possible to deposit the proposed film at CMOS backend compatible temperatures. The paper also confirms that the mask can easily be dry-removed after the process with high etching-rate by controlling the ICP and RF power and the SF6 to O2 ratios, and without affecting the underlying silicon substrate. Using low ICP and RF power, elevated temperatures (i.e., > - 80°C), and an adjusted O2:SF6 ratio (i.e., ~6%), we were able to etch away the SiGe mask without adversely affecting the final profile. Ultimately, we were able to develop deep silicon- trenches with high aspect ratio etching straight profiles. © 1992-2012 IEEE.

  16. Effects of anodic potential and chloride ion on overall reactivity in electrochemical reactors designed for solar-powered wastewater treatment.

    Science.gov (United States)

    Cho, Kangwoo; Qu, Yan; Kwon, Daejung; Zhang, Hao; Cid, Clément A; Aryanfar, Asghar; Hoffmann, Michael R

    2014-02-18

    We have investigated electrochemical treatment of real domestic wastewater coupled with simultaneous production of molecular H2 as useful byproduct. The electrolysis cells employ multilayer semiconductor anodes with electroactive bismuth-doped TiO2 functionalities and stainless steel cathodes. DC-powered laboratory-scale electrolysis experiments were performed under static anodic potentials (+2.2 or +3.0 V NHE) using domestic wastewater samples, with added chloride ion in variable concentrations. Greater than 95% reductions in chemical oxygen demand (COD) and ammonium ion were achieved within 6 h. In addition, we experimentally determined a decreasing overall reactivity of reactive chlorine species toward COD with an increasing chloride ion concentration under chlorine radicals (Cl·, Cl2(-)·) generation at +3.0 V NHE. The current efficiency for COD removal was 12% with the lowest specific energy consumption of 96 kWh kgCOD(-1) at the cell voltage of near 4 V in 50 mM chloride. The current efficiency and energy efficiency for H2 generation were calculated to range from 34 to 84% and 14 to 26%, respectively. The hydrogen comprised 35 to 60% by volume of evolved gases. The efficacy of our electrolysis cell was further demonstrated by a 20 L prototype reactor totally powered by a photovoltaic (PV) panel, which was shown to eliminate COD and total coliform bacteria in less than 4 h of treatment.

  17. Sheath-lens probe for negative ion detection in reactive plasmas

    International Nuclear Information System (INIS)

    Stamate, E.; Sugai, H.; Takai, O.; Ohe, K.

    2004-01-01

    A method that allows easy and inexpensive detection of negative ions is introduced. The method is based upon the electrostatic lens effect of the sheath layer evolving to a positively biased planar probe that focuses the negative charges to distinct regions on the surface. Trajectories of negative ions inside the sheath are obtained after computing the potential and electric field distribution by solving in three dimensions the nonlinear Poisson equation. The negative ions' flux to square and disk probes is developed in Ar/SF 6 and O 2 plasmas. The method allows negative ion detection with sensitivity higher than that of Langmuir probes

  18. Multiple-height microstructure fabricated by deep reactive ion etching and soft resist masks combined with UV curing

    International Nuclear Information System (INIS)

    Sato, R; Sawada, T; Kumagai, S; Sasaki, M

    2014-01-01

    Multiple-height microstructures are realized by deep reactive ion etching and UV-cured photoresist used in the embedded mask process. Although the UV-cured photoresist is a soft mask, its material property becomes stable against resist thinner and UV exposure. A layered resist pattern can be realized by stacking normal photoresist on the UV-cured photoresist. The normal photoresist can be selectively removed by the flush exposure and developing after the first Si etching. This technique is applied to two MEMS devices

  19. Sacrificial structures for deep reactive ion etching of high-aspect ratio kinoform silicon x-ray lenses

    DEFF Research Database (Denmark)

    Stöhr, Frederik; Michael-Lindhard, Jonas; Hübner, Jörg

    2015-01-01

    This article describes the realization of complex high-aspect ratio silicon structures with feature dimensions from 100 lm to 100nm by deep reactive ion etching using the Bosch process. As the exact shape of the sidewall profiles can be crucial for the proper functioning of a device, the authors...... of the sacrificial structures was accomplished by thermal oxidation and subsequent selective wet etching. The effects of the dimensions and relative placement of sacrificial walls and pillars on the etching result were determined through systematic experiments. The authors applied this process for exact sidewall...

  20. Structure and reactivity of molybdenum oxide cluster ions in the gas phase

    International Nuclear Information System (INIS)

    Goncharov, V.B.; Fialko, E.F.

    2002-01-01

    A set of cluster ions of molybdenum oxides Mo x O y + (x = 1-5, y = 1-15) was prepared using a combination of the ionic cyclotron resonance method and Knudsen effusion source. Dependence of concentration of different molybdenum oxide ions on the time of retention and their interaction with carbon monoxide was studied. It is shown that Mo x O y + ions with x>3 contain cyclic fragment Mo 3 O 9 in their structure. Oxygen binding energies within ionic clusters Mo x O y + were estimated [ru

  1. The reactivity study of peptide A3-capped gold and silver nanoparticles with heavy metal ions

    International Nuclear Information System (INIS)

    Yang, Hongyu; Tang, Zhenghua; Wang, Likai; Zhou, Weijia; Li, Ligui; Zhang, Yongqing; Chen, Shaowei

    2016-01-01

    Highlights: • Apparent color change upon the addition of Hg"2"+ or As"3"+ ions into A3-AuNPs solution. • Distinct color change of A3-AgNPs solution only in the presence of Hg"2"+ ions. • The Hg"2"+ concentration limit of A3-AgNPs about 40 times lower than A3-AuNPs. • Based on the DLS, TEM and XPS results, two reaction mechanisms have been proposed. - Abstract: Peptide A3-capped gold and silver nanoparticles were prepared by chemical reduction of metal salt precursors. The nanoparticles exhibited apparent but distinctly different color changes upon the addition of selected heavy metal ions. For gold nanoparticles, the solution color was found to change from red to blue in the presence of Hg"2"+ or As"3"+ ions, accompanied with broadening and a red-shift of the surface plasmon resonance peak. In contrast, silver nanoparticles showed an apparent color change from yellow to colorless only in the presence of Hg"2"+, along with a blue-shift and diminishment of the surface plasmon resonance peak. The Hg"2"+ reaction concentration limit of silver nanoparticle was about 40 times lower than that of gold nanoparticle. Based on the dynamic light scattering, transmission electron microscopy and X-ray photoelectron spectroscopic results, the reaction mechanism has been proposed. Such a sensitive variation of the nanoparticle optical properties to selective ions might be exploited for ion detection for potential applications.

  2. Large-area soft x-ray projection lithography using multilayer mirrors structured by RIE

    Science.gov (United States)

    Rahn, Steffen; Kloidt, Andreas; Kleineberg, Ulf; Schmiedeskamp, Bernt; Kadel, Klaus; Schomburg, Werner K.; Hormes, F. J.; Heinzmann, Ulrich

    1993-01-01

    SXPL (soft X-ray projection lithography) is one of the most promising applications of X-ray reflecting optics using multilayer mirrors. Within our collaboration, such multilayer mirrors were fabricated, characterized, laterally structured and then used as reflection masks in a projecting lithography procedure. Mo/Si-multilayer mirrors were produced by electron beam evaporation in UHV under thermal treatment with an in-situ X-ray controlled thickness in the region of 2d equals 14 nm. The reflectivities measured at normal incidence reached up to 54%. Various surface analysis techniques have been applied in order to characterize and optimize the X-ray mirrors. The multilayers were patterned by reactive ion etching (RIE) with CF(subscript 4), using a photoresist as the etch mask, thus producing X-ray reflection masks. The masks were tested in the synchrotron radiation laboratory of the electron accelerator ELSA at the Physikalisches Institut of Bonn University. A double crystal X-ray monochromator was modified so as to allow about 0.5 cm(superscript 2) of the reflection mask to be illuminated by white synchrotron radiation. The reflected patterns were projected (with an energy of 100 eV) onto the resist (Hoechst AZ PF 514), which was mounted at an average distance of about 7 mm. In the first test-experiments, structure sizes down to 8 micrometers were nicely reproduced over the whole of the exposed area. Smaller structures were distorted by Fresnel-diffraction. The theoretically calculated diffraction images agree very well with the observed images.

  3. The reactivity study of peptide A3-capped gold and silver nanoparticles with heavy metal ions

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Hongyu [New Energy Research Institute, School of Environment and Energy, South China University of Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006 (China); Tang, Zhenghua, E-mail: zhht@scut.edu.cn [New Energy Research Institute, School of Environment and Energy, South China University of Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006 (China); Guangdong Provincial Key Laboratory of Atmospheric Environment and Pollution Control, School of Environment and Energy, South China University of Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006 (China); Wang, Likai; Zhou, Weijia; Li, Ligui [New Energy Research Institute, School of Environment and Energy, South China University of Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006 (China); Zhang, Yongqing [Guangdong Provincial Key Laboratory of Atmospheric Environment and Pollution Control, School of Environment and Energy, South China University of Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006 (China); Chen, Shaowei, E-mail: shaowei@ucsc.edu [New Energy Research Institute, School of Environment and Energy, South China University of Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006 (China); Department of Chemistry and Biochemistry, University of California, 1156 High Street, Santa Cruz, CA 95064 (United States)

    2016-08-15

    Highlights: • Apparent color change upon the addition of Hg{sup 2+} or As{sup 3+} ions into A3-AuNPs solution. • Distinct color change of A3-AgNPs solution only in the presence of Hg{sup 2+} ions. • The Hg{sup 2+} concentration limit of A3-AgNPs about 40 times lower than A3-AuNPs. • Based on the DLS, TEM and XPS results, two reaction mechanisms have been proposed. - Abstract: Peptide A3-capped gold and silver nanoparticles were prepared by chemical reduction of metal salt precursors. The nanoparticles exhibited apparent but distinctly different color changes upon the addition of selected heavy metal ions. For gold nanoparticles, the solution color was found to change from red to blue in the presence of Hg{sup 2+} or As{sup 3+} ions, accompanied with broadening and a red-shift of the surface plasmon resonance peak. In contrast, silver nanoparticles showed an apparent color change from yellow to colorless only in the presence of Hg{sup 2+}, along with a blue-shift and diminishment of the surface plasmon resonance peak. The Hg{sup 2+} reaction concentration limit of silver nanoparticle was about 40 times lower than that of gold nanoparticle. Based on the dynamic light scattering, transmission electron microscopy and X-ray photoelectron spectroscopic results, the reaction mechanism has been proposed. Such a sensitive variation of the nanoparticle optical properties to selective ions might be exploited for ion detection for potential applications.

  4. Knudsen pump produced via silicon deep RIE, thermal oxidation, and anodic bonding processes for on-chip vacuum pumping

    Science.gov (United States)

    Van Toan, Nguyen; Inomata, Naoki; Trung, Nguyen Huu; Ono, Takahito

    2018-05-01

    This work describes the fabrication and evaluation of the Knudsen pump for on-chip vacuum pumping that works based on the principle of a thermal transpiration. Three AFM (atomic force microscope) cantilevers are integrated into small chambers with a size of 5 mm  ×  3 mm  ×  0.4 mm for the pump’s evaluation. Knudsen pump is fabricated using deep RIE (reactive ion etching), wet thermal oxidation and anodic bonding processes. The fabricated device is evaluated by monitoring the quality (Q) factor of the integrated cantilevers. The Q factor of the cantilever is increased from 300 -1150 in cases without and with a temperature difference approximately 25 °C between the top (the hot side at 40 °C) and bottom (the cold side at 15 °C) sides of the fabricated device, respectively. The evacuated chamber pressure of around 10 kPa is estimated from the Q factor of the integrated cantilevers.

  5. Metal ion reactive thin films using spray electrostatic LbL assembly.

    Science.gov (United States)

    Krogman, Kevin C; Lyon, Katharine F; Hammond, Paula T

    2008-11-20

    By using the spray-layer-by-layer (Spray-LbL) technique, the number of metal counterions trapped within LbL coatings is significantly increased by kinetically freezing the film short of equilibrium, potentially limiting interchain penetration and forcing chains to remain extrinsically compensated to a much greater degree than observed in the traditional dipped LbL technique. The basis for the enhanced entrapment of metal ions such as Cu2+, Fe2+, and Ag+ is addressed, including the equilibrium driving force for extrinsic compensation by soft versus hard metal ions and the impact of Spray-LbL on the kinetics of polymer-ion complexation. These polymer-bound metal-ion coatings are also demonstrated to be effective treatments for air filtration, functionalizing existing filters with the ability to strongly bind toxic industrial compounds such as ammonia or cyanide gases, as well as chemical warfare agent simulants such as chloroethyl ethyl sulfide. On the basis of results reported here, future work could extend this method to include other toxic soft-base ligands such as carbon monoxide, benzene, or organophosphate nerve agents.

  6. Reactive ion etching of tellurite and chalcogenide waveguides using hydrogen, methane, and argon

    International Nuclear Information System (INIS)

    Vu, K. T.; Madden, S. J.

    2011-01-01

    The authors report in detail on the reactive plasma etching properties of tellurium and demonstrate a high quality etching process using hydrogen, methane, and argon. Very low loss planar ridge waveguides are demonstrated. Optical losses in tellurium dioxide waveguides below 0.1 dB/cm in most of the near infrared region of the electromagnetic spectrum and at 1550 nm have been achieved--the lowest ever reported by more than an order of magnitude and clearly suitable for planar integrated devices. The etch process is also shown to be suitable for chalcogenide glasses which may be of importance in applications such as phase change memory devices and nonlinear integrated optics.

  7. Stresses and Temperature Stability of Dense Wavelength Division Multiplexing Filters Prepared by Reactive Ion-Assisted E-Gun Evaporation

    Science.gov (United States)

    Wei, Chao-Tsang; Shieh, Han-Ping D.

    2005-10-01

    In this paper, we report the in situ measurement of the temperature stability of narrow-band-pass filters on different types of substrate, for dense wavelength division multiplexing (DWDM) filters in optical-fiber transmission systems. The DWDM filters were designed as all-dielectric Fabry-Perot filters and fabricated by reactive ion-assisted deposition. Ta2O5 and SiO2 were used as high- and low-refractive-index layers, respectively, for constructing the DWDM filters. The accuracy and stability of the coating process were evaluated for fabricating the DWDM filters for the temperature stability of the center wavelength. The center wavelength shift was determined to be greatly dependent on the coefficient of thermal expansion of the substrate on which the filter is deposited.

  8. Fabrication of Super-Hydrophobic Microchannels via Strain-Recovery Deformations of Polystyrene and Oxygen Reactive Ion Etch.

    Science.gov (United States)

    Chakraborty, Anirban; Xiang, Mingming; Luo, Cheng

    2013-08-19

    In this article, we report a simple approach to generate micropillars (whose top portions are covered by sub-micron wrinkles) on the inner surfaces of polystyrene (PS) microchannels, as well as on the top surface of the PS substrate, based on strain-recovery deformations of the PS and oxygen reactive ion etch (ORIE). Using this approach, two types of micropillar-covered microchannels are fabricated. Their widths range from 118 μm to 132 μm, depths vary from 40 μm to 44 μm, and the inclined angles of their sidewalls are from 53° to 64°. The micropillars enable these microchannels to have super-hydrophobic properties. The contact angles observed on the channel-structured surfaces are above 162°, and the tilt angles to make water drops roll off from these channel-structured substrates can be as small as 1°.

  9. Fabrication of Super-Hydrophobic Microchannels via Strain-Recovery Deformations of Polystyrene and Oxygen Reactive Ion Etch

    Directory of Open Access Journals (Sweden)

    Anirban Chakraborty

    2013-08-01

    Full Text Available In this article, we report a simple approach to generate micropillars (whose top portions are covered by sub-micron wrinkles on the inner surfaces of polystyrene (PS microchannels, as well as on the top surface of the PS substrate, based on strain-recovery deformations of the PS and oxygen reactive ion etch (ORIE. Using this approach, two types of micropillar-covered microchannels are fabricated. Their widths range from 118 μm to 132 μm, depths vary from 40 μm to 44 μm, and the inclined angles of their sidewalls are from 53° to 64°. The micropillars enable these microchannels to have super-hydrophobic properties. The contact angles observed on the channel-structured surfaces are above 162°, and the tilt angles to make water drops roll off from these channel-structured substrates can be as small as 1°.

  10. Temperature dependence of InN film deposition by an RF plasma-assisted reactive ion beam sputtering deposition technique

    International Nuclear Information System (INIS)

    Shinoda, Hiroyuki; Mutsukura, Nobuki

    2005-01-01

    Indium nitride (InN) films were deposited on Si(100) substrates using a radiofrequency (RF) plasma-assisted reactive ion beam sputtering deposition technique at various substrate temperatures. The X-ray diffraction patterns of the InN films suggest that the InN films deposited at substrate temperatures up to 370 deg C were cubic crystalline InN; and at 500 deg C, the InN film was hexagonal crystalline InN. In a scanning electron microscope image of the InN film surface, facets of cubic single-crystalline InN grains were clearly observed on the InN film deposited at 370 deg C. The inclusion of metallic indium appeared on the InN film deposited at 500 deg C

  11. Optimizing shape uniformity and increasing structure heights of deep reactive ion etched silicon x-ray lenses

    DEFF Research Database (Denmark)

    Stöhr, Frederik; Wright, Jonathan; Simons, Hugh

    2015-01-01

    Line-focusing compound silicon x-ray lenses with structure heights exceeding 300 μm were fabricated using deep reactive ion etching. To ensure profile uniformity over the full height, a new strategy was developed in which the perimeter of the structures was defined by trenches of constant width....... The remaining sacrificial material inside the lens cavities was removed by etching through the silicon wafer. Since the wafers become fragile after through-etching, they were then adhesively bonded to a carrier wafer. Individual chips were separated using laser micro machining and the 3D shape of fabricated...... analysis, where a slight bowing of the lens sidewalls and an insufficiently uniform apex region are identified as resolution-limiting factors. Despite these, the proposed fabrication route proved a viable approach for producing x-ray lenses with large structure heights and provides the means to improve...

  12. Photophysics of trioxatriangulenium ion. Electrophilic reactivity in the ground state and excited singlet state

    DEFF Research Database (Denmark)

    Reynisson, J.; Wilbrandt, R.; Brinck, V.

    2002-01-01

    . The physical and chemical properties of the excited singlet state of the trioxatriangulenium (TOTA(+)) carbenium ion are investigated by experimental and Computational means. The degeneracy of the lowest excited states is counteracted by Jahn-Teller-type distortion, which leads to vibronic broadening...... of the long wavelength absorption band. A strong fluorescence is observed at 520 nm (tau(n) = 14.6 ns, phi(n) = 0.12 in deaerated acetonitrile). The fluorescence is quenched by 10 aromatic electron donors predominantly via a dynamic charge transfer mechanism, but ground state complexation is shown...... triphenylenes is studied separately. Phosphorescence spectra, triplet lifetimes, and triplet-triplet absorption spectra are provided. In the discussion, TOTA(+) is compared to the unsubstituted xanthenium ion and its 9-phenyl derivative with respect to the excited state properties....

  13. Generation of positive and negative oxygen ions in magnetron discharge during reactive sputtering of alumina

    Czech Academy of Sciences Publication Activity Database

    Pokorný, Petr; Bulíř, Jiří; Lančok, Ján; Musil, Jindřich; Novotný, Michal

    2010-01-01

    Roč. 7, č. 11 (2010), s. 910-914 ISSN 1612-8850 R&D Projects: GA AV ČR IAA100100718; GA AV ČR KAN400100653; GA ČR GP202/09/P324 Institutional research plan: CEZ:AV0Z10100522 Keywords : aluminium oxide * ion-energy distribution function * magnetron * mass spectrometry * pulsed discharges Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.643, year: 2010

  14. Conference G.Labouérie

    CERN Document Server

    Labouérie,G

    1991-01-01

    Conférence organisée par l'Association du Personnel avec l'Amiral G.Labouérie, membre de l'Académie de Marine, qui a commandé l'opération "Prométhée" dans l'océan indien en 1987 et qui, conférencier, est auteur d'ouvrages et de nombreux articles consacrés à la stratégie, mais aussi à la théologie, au roman et à la poésie.Il fait part de ses reflexions qu'il a accumulées sur l'océan et sur la terre qui sont étroitement mélés

  15. Thermal properties and surface reactivity in simulated body fluid of new strontium ion-containing phosphate glasses.

    Science.gov (United States)

    Massera, J; Petit, L; Cardinal, T; Videau, J J; Hupa, M; Hupa, L

    2013-06-01

    In this paper, we investigate the effect of SrO substitution for CaO in 50P₂O₅-10Na₂-(40-x)CaO-xSrO glass system (x from 0 to 40) on the thermal and structural properties and also on the glass reactivity in simulated body fluid (SBF) in order to find new glass candidates for biomedical glass fibers. The addition of SrO at the expense of CaO seems to restrain the leaching of phosphate ions in the solution limiting the reduction of the solution pH. We observed the formation of an apatite layer at the surface of the glasses when in contact with SBF. SrO and MgO were found in the apatite layer of the strontium ion-containing glasses, the concentration of which increases with an increase of SrO content. We think that it is the presence of MgO and SrO in the layer which limits the leaching of phosphate in the solution and thus the glass dissolution in SBF.

  16. The effect of FR enhancement in reactive ion beam sputtered Bi, Gd, Al-substituted iron- garnets: Bi2O3 nanocomposite films

    OpenAIRE

    Berzhansky, V.; Shaposhnikov, A.; Karavainikov, A.; Prokopov, A.; Mikhailova, T.; Lukienko, I.; Kharchenko, Yu.; Miloslavskaya, O.; Kharchenko, N.

    2012-01-01

    The effect of considerable Faraday rotation (FR) and figure of merit (Q) enhancement in Bi, Gd, Al-substituted iron garnets: Bi2O3 nano-composite films produced by separate reactive ion beam sputtered Bi:YIG and Bi2O3 films was found. It reached threefold enhancement of the FR and twofold of the Q one on GGG substrates.

  17. Reactivity Control of Rhodium Cluster Ions by Alloying with Tantalum Atoms.

    Science.gov (United States)

    Mafuné, Fumitaka; Tawaraya, Yuki; Kudoh, Satoshi

    2016-02-18

    Gas phase, bielement rhodium and tantalum clusters, RhnTam(+) (n + m = 6), were prepared by the double laser ablation of Rh and Ta rods in He carrier gas. The clusters were introduced into a reaction gas cell filled with nitric oxide (NO) diluted with He and were subjected to collisions with NO and He at room temperature. The product species were observed by mass spectrometry, demonstrating that the NO molecules were sequentially adsorbed on the RhnTam(+) clusters to form RhnTam(+)NxOx (x = 1, 2, 3, ...) species. In addition, oxide clusters, RhnTam(+)O2, were also observed, suggesting that the NO molecules were dissociatively adsorbed on the cluster, the N atoms migrated on the surface to form N2, and the N2 molecules were released from RhnTam(+)N2O2. The reactivity, leading to oxide formation, was composition dependent: oxide clusters were dominantly formed for the bielement clusters containing both Rh and Ta atoms, whereas such clusters were hardly formed for the single-element Rhn(+) and Tam(+) clusters. DFT calculations indicated that the Ta atoms induce dissociation of NO on the clusters by lowering the dissociation energy, whereas the Rh atoms enable release of N2 by lowering the binding energy of the N atoms on the clusters.

  18. Effects of metal ions on the reactivity and corrosion electrochemistry of Fe/FeS nanoparticles.

    Science.gov (United States)

    Kim, Eun-Ju; Kim, Jae-Hwan; Chang, Yoon-Seok; Turcio-Ortega, David; Tratnyek, Paul G

    2014-04-01

    Nano-zerovalent iron (nZVI) formed under sulfidic conditions results in a biphasic material (Fe/FeS) that reduces trichloroethene (TCE) more rapidly than nZVI associated only with iron oxides (Fe/FeO). Exposing Fe/FeS to dissolved metals (Pd(2+), Cu(2+), Ni(2+), Co(2+), and Mn(2+)) results in their sequestration by coprecipitation as dopants into FeS and FeO and/or by electroless precipitation as zerovalent metals that are hydrogenation catalysts. Using TCE reduction rates to probe the effect of metal amendments on the reactivity of Fe/FeS, it was found that Mn(2+) and Cu(2+) decreased TCE reduction rates, while Pd(2+), Co(2+), and Ni(2+) increased them. Electrochemical characterization of metal-amended Fe/FeS showed that aging caused passivation by growth of FeO and FeS phases and poisoning of catalytic metal deposits by sulfide. Correlation of rate constants for TCE reduction (kobs) with electrochemical parameters (corrosion potentials and currents, Tafel slopes, and polarization resistance) and descriptors of hydrogen activation by metals (exchange current density for hydrogen reduction and enthalpy of solution into metals) showed the controlling process changed with aging. For fresh Fe/FeS, kobs was best described by the exchange current density for activation of hydrogen, whereas kobs for aged Fe/FeS correlated with electrochemical descriptors of electron transfer.

  19. MaRIE; a proposed materials facility at Los Alamos National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Bourke, M.A.M. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

    2009-06-15

    This presentation will describe the current definition of a proposed new facility called MaRIE at Los Alamos National Laboratory. The concept is of decadal scope and is predicated on the collocation of a fourth-generation X-ray light source with a proton accelerator spallation neutron source and complementary synthesis and characterization capabilities. MaRIE is an acronym which stands for Matter-Radiation Interactions in Extremes. The facility has been conceived partly in response to the increasing role that control science is expected to play in materials research compared to observation science. If new materials are to be implemented in a timely fashion for the most aggressive conditions of proposed fission and fusion energy applications they will have to rely, at least in part, on models, simulations and scientific insight. Validation of these models will require measurements at spatial and temporal scales that have only recently become enabled by the latest generations of light sources. A hallmark of the MaRIE concept is an emphasis on in situ studies (under extreme neutron, photon and ion irradiation conditions) of the phenomena that lead to swelling, phase transformations, thermal properties and corrosion. Insights and data, relevant to atomistic and quantum mechanical models, are major goals, as well as the facilitation of rapid materials discovery. It is hoped that this presentation will solicit input on aspects of the facility definition that should be strengthened or diminished to meet the needs of the fission community. (authors)

  20. Production of chemically reactive radioactive ion beams through on-line separation; Production de faisceaux d'ions radioactifs chimiquement reactifs par separation en ligne

    Energy Technology Data Exchange (ETDEWEB)

    Joinet, A

    2003-10-01

    The ISOL (isotope separation on line) allows the production of secondary radioactive ion beams through spallation or fragmentation or fission reactions that take place in a thick target bombarded by a high intensity primary beam. The challenge is to increase the intensity and purity of the radioactive beam. The optimization of the system target/source requires the right choice of material for the target by taking into account the stability of the material, its reactivity and the ionization method used. The target is an essential part of the system because radioactive elements are generated in it and are released more or less quickly. Tests have been made in order to select the best fitted material for the release of S, Se, Te, Ge and Sn. Materials tested as target filling are: ZrO{sub 2}, Nb, Ti, V,TiO{sub 2}, CeO{sub x}, ThO{sub 2}, C, ZrC{sub 4} and VC). Other molecules such as: COSe, COS, SeS, COTe, GeS, SiS, SnS have been studied to ease the extraction of recoil nuclei (Se, S, Te, Ge and Sn) produced inside the target.

  1. Production of chemically reactive radioactive ion beams through on-line separation; Production de faisceaux d'ions radioactifs chimiquement reactifs par separation en ligne

    Energy Technology Data Exchange (ETDEWEB)

    Joinet, A

    2003-10-01

    The ISOL (isotope separation on line) allows the production of secondary radioactive ion beams through spallation or fragmentation or fission reactions that take place in a thick target bombarded by a high intensity primary beam. The challenge is to increase the intensity and purity of the radioactive beam. The optimization of the system target/source requires the right choice of material for the target by taking into account the stability of the material, its reactivity and the ionization method used. The target is an essential part of the system because radioactive elements are generated in it and are released more or less quickly. Tests have been made in order to select the best fitted material for the release of S, Se, Te, Ge and Sn. Materials tested as target filling are: ZrO{sub 2}, Nb, Ti, V,TiO{sub 2}, CeO{sub x}, ThO{sub 2}, C, ZrC{sub 4} and VC). Other molecules such as: COSe, COS, SeS, COTe, GeS, SiS, SnS have been studied to ease the extraction of recoil nuclei (Se, S, Te, Ge and Sn) produced inside the target.

  2. Different Reactive Oxygen Species Lead to Distinct Changes of Cellular Metal Ions in the Eukaryotic Model Organism Saccharomyces cerevisiae

    Directory of Open Access Journals (Sweden)

    Peter J. Rogers

    2011-11-01

    Full Text Available Elemental uptake and export of the cell are tightly regulated thereby maintaining the ionomic homeostasis. This equilibrium can be disrupted upon exposure to exogenous reactive oxygen species (ROS, leading to reduction or elevation of the intracellular metal ions. In this study, the ionomic composition in the eukaryotic model organism Saccharomyces cerevisiae was profiled using the inductively-coupled plasma optical emission spectrometer (ICP-OES following the treatment with individual ROS, including hydrogen peroxide, cumen hydroperoxide, linoleic acid hydroperoxide (LAH, the superoxide-generating agent menadione, the thiol-oxidising agent diamide [diazine-dicarboxylic acid-bis(dimethylamide], dimedone and peroxynitrite. The findings demonstrated that different ROS resulted in distinct changes in cellular metal ions. Aluminium (Al3+ level rose up to 50-fold after the diamide treatment. Cellular potassium (K+ in LAH-treated cells was 26-fold less compared to the non-treated controls. The diamide-induced Al3+ accumulation was further validated by the enhanced Al3+ uptake along the time course and diamide doses. Pre-incubation of yeast with individual elements including iron, copper, manganese and magnesium failed to block diamide-induced Al3+ uptake, suggesting Al3+-specific transporters could be involved in Al3+ uptake. Furthermore, LAH-induced potassium depletion was validated by a rescue experiment in which addition of potassium increased yeast growth in LAH-containing media by 26% compared to LAH alone. Taken together, the data, for the first time, demonstrated the linkage between ionomic profiles and individual oxidative conditions.

  3. Origin of Enhanced Reactivity of a Microsolvated Nucleophile in Ion Pair SN2 Reactions: The Cases of Sodium p-Nitrophenoxide with Halomethanes in Acetone.

    Science.gov (United States)

    Li, Qiang-Gen; Xu, Ke; Ren, Yi

    2015-04-30

    In a kinetic experiment on the SN2 reaction of sodium p-nitrophenoxide with iodomethane in acetone-water mixed solvent, Humeres et al. (J. Org. Chem. 2001, 66, 1163) found that the reaction depends strongly on the medium, and the fastest rate constant was observed in pure acetone. The present work tries to explore why acetone can enhance the reactivity of the title reactions. Accordingly, we make a mechanistic study on the reactions of sodium p-nitrophenoxide with halomethanes (CH3X, X = Cl, Br, I) in acetone by using a supramolecular/continuum model at the PCM-MP2/6-311+G(d,p)//B3LYP/6-311+G(d,p) level, in which the ion pair nucleophile is microsolvated by one to three acetone molecules. We compared the reactivity of the microsolvated ion pair nucleophiles with solvent-free ion pair and anionic ones. Our results clearly reveal that the microsolvated ion pair nucleophile is favorable for the SN2 reactions; meanwhile, the origin of the enhanced reactivity induced by microsolvation of the nucleophile is discussed in terms of the geometries of transition state (TS) structures and activation strain model, suggesting that lower deformation energies and stronger interaction energies between the deformed reactants in the TS lead to the lower overall reaction barriers for the SN2 reaction of microsolvated sodium p-nitrophenoxide toward halomethanes in acetone.

  4. Deep reactive ion etching of silicon moulds for the fabrication of diamond x-ray focusing lenses

    Science.gov (United States)

    Malik, A. M.; Fox, O. J. L.; Alianelli, L.; Korsunsky, A. M.; Stevens, R.; Loader, I. M.; Wilson, M. C.; Pape, I.; Sawhney, K. J. S.; May, P. W.

    2013-12-01

    Diamond is a highly desirable material for use in x-ray optics and instrumentation. However, due to its extreme hardness and resistance to chemical attack, diamond is difficult to form into a structure suitable for x-ray lenses. Refractive lenses are capable of delivering x-ray beams with nanoscale resolution. A moulding technique for the fabrication of diamond lenses is reported. High-quality silicon moulds were made using photolithography and deep reactive ion etching. The study of the etch process conducted to achieve silicon moulds with vertical sidewalls and minimal surface roughness is discussed. Issues experienced when attempting to deposit diamond into a high-aspect-ratio mould by chemical vapour deposition are highlighted. Two generations of lenses have been successfully fabricated using this transfer-moulding approach with significant improvement in the quality and performance of the optics observed in the second iteration. Testing of the diamond x-ray optics on the Diamond Light Source Ltd synchrotron B16 beamline has yielded a line focus of sub-micrometre width.

  5. Surface photovoltage studies of p-type AlGaN layers after reactive-ion etching

    Science.gov (United States)

    McNamara, J. D.; Phumisithikul, K. L.; Baski, A. A.; Marini, J.; Shahedipour-Sandvik, F.; Das, S.; Reshchikov, M. A.

    2016-10-01

    The surface photovoltage (SPV) technique was used to study the surface and electrical properties of Mg-doped, p-type AlxGa1-xN (0.06 GaN:Mg thin films and from the predictions of a thermionic model for the SPV behavior. In particular, the SPV of the p-AlGaN:Mg layers exhibited slower-than-expected transients under ultraviolet illumination and delayed restoration to the initial dark value. The slow transients and delayed restorations can be attributed to a defective surface region which interferes with normal thermionic processes. The top 45 nm of the p-AlGaN:Mg layer was etched using a reactive-ion etch which caused the SPV behavior to be substantially different. From this study, it can be concluded that a defective, near-surface region is inhibiting the change in positive surface charge by allowing tunneling or hopping conductivity of holes from the bulk to the surface, or by the trapping of electrons traveling to the surface by a high concentration of defects in the near-surface region. Etching removes the defective layer and reveals a region of presumably higher quality, as evidenced by substantial changes in the SPV behavior.

  6. Probing molecules on a surface by Cs+ reactive ion scattering: identification of C2Hx (x≤4) hydrocarbons

    International Nuclear Information System (INIS)

    Kang, H.; Lee, C.W.; Hwang, C.H.; Kim, C.M.

    2003-01-01

    We studied molecular species appearing in the reactions of ethylene on a Pt(1 1 1) surface by the technique of Cs + reactive ion scattering (Cs + RIS). Dehydrogenation reaction of ethylene was examined for a surface temperature range of 100-800 K, and the RIS result verified the well-known sequence of forming di-σ-bonded ethylene (-CH 2 -CH 2 -), ethylidyne (≡C-CH 3 ), CH, and then surface carbons, as the temperature increased. In particular, the intermediate species in the conversion of ethylene to ethylidyne was closely investigated, which showed the presence of an ethylidene intermediate (≡CH-CH 3 ). In a study of H/D exchange reactions between surface C 2 D 4 and H, we successfully identified the ethylenes in which several deuterium atoms were substituted by hydrogen (C 2 D 4-x H x ,x=0-4), and quantitatively determined their relative populations. These examples demonstrate the ability of the Cs + RIS method to identify small hydrocarbons and their isotope-exchanged species on surfaces

  7. Nanostructuring of Mo/Si multilayers by means of reactive ion etching using a three-level mask

    International Nuclear Information System (INIS)

    Dreeskornfeld, L.; Haindl, G.; Kleineberg, U.; Heinzmann, U.; Shi, F.; Volland, B.; Rangelow, I.W.; Majkova, E.; Luby, S.; Kostic,; Matay, L.; Hrkut, P.; Hudek, P.; Lee, H.-Y.

    2004-01-01

    Recently, Mo/Si multilayer reflectors have been gaining industry interest as a promising choice for the next generation extreme ultraviolet mask material for printing sub 70 nm feature size devices. A reactive ion etching system with optimized hardware using CHF 3 /Ar process regime shows the capability for highly anisotropic etching of sub congruent with 400 nm feature sizes in Mo/Si test multilayers with ten periods and a bilayer thickness of 7.8 nm which were prepared by e-beam evaporation. A three-level-mask technique consisting of a top resist mask layer poly-methyl-meth-acrylate, a middle hard amorphous Si mask layer and a bottom-level polyimide layer is used to create the etch mask. The etch characteristics of the polyimide film is shown to be one of the major factors determining the success of the described multilayer etching process. The developed etching technology demonstrates superior process performance without facets, excellent uniformity and good profile control. No contamination, degeneration or defect generation in the unetched multilayer structure could be detected. This non-conventional process results in minimum deposition during the etching thus eliminating the need for a dry or wet cleaning. Sidewall angles in Mo/Si multilayers of 85 deg. , without undercut, bowing and ripples resulting in smooth sidewalls are achieved

  8. An optical MEMS accelerometer fabricated using double-sided deep reactive ion etching on silicon-on-insulator wafer

    Science.gov (United States)

    Teo, Adrian J. T.; Li, Holden; Tan, Say Hwa; Yoon, Yong-Jin

    2017-06-01

    Optical MEMS devices provide fast detection, electromagnetic resilience and high sensitivity. Using this technology, an optical gratings based accelerometer design concept was developed for seismic motion detection purposes that provides miniaturization, high manufacturability, low costs and high sensitivity. Detailed in-house fabrication procedures of a double-sided deep reactive ion etching (DRIE) on a silicon-on-insulator (SOI) wafer for a micro opto electro mechanical system (MOEMS) device are presented and discussed. Experimental results obtained show that the conceptual device successfully captured motion similar to a commercial accelerometer with an average sensitivity of 13.6 mV G-1, and a highest recorded sensitivity of 44.1 mV G-1. A noise level of 13.5 mV was detected due to experimental setup limitations. This is the first MOEMS accelerometer developed using double-sided DRIE on SOI wafer for the application of seismic motion detection, and is a breakthrough technology platform to open up options for lower cost MOEMS devices.

  9. An optical MEMS accelerometer fabricated using double-sided deep reactive ion etching on silicon-on-insulator wafer

    International Nuclear Information System (INIS)

    Teo, Adrian J T; Li, Holden; Yoon, Yong-Jin; Tan, Say Hwa

    2017-01-01

    Optical MEMS devices provide fast detection, electromagnetic resilience and high sensitivity. Using this technology, an optical gratings based accelerometer design concept was developed for seismic motion detection purposes that provides miniaturization, high manufacturability, low costs and high sensitivity. Detailed in-house fabrication procedures of a double-sided deep reactive ion etching (DRIE) on a silicon-on-insulator (SOI) wafer for a micro opto electro mechanical system (MOEMS) device are presented and discussed. Experimental results obtained show that the conceptual device successfully captured motion similar to a commercial accelerometer with an average sensitivity of 13.6 mV G −1 , and a highest recorded sensitivity of 44.1 mV G −1 . A noise level of 13.5 mV was detected due to experimental setup limitations. This is the first MOEMS accelerometer developed using double-sided DRIE on SOI wafer for the application of seismic motion detection, and is a breakthrough technology platform to open up options for lower cost MOEMS devices. (technical note)

  10. Effects of a glass-ionomer cement on the remineralization of occlusal caries: an in situ study Efeito de um cimento de ionômero de vidro sobre a remineralização de cárie na superfície oclusal: estudo in situ

    Directory of Open Access Journals (Sweden)

    Mônica Tostes Amaral

    2006-04-01

    íodos de 30 dias com intervalo de 1 semana entre eles, usando dispositivos intra-orais. Quatro procedimentos de tratamento experimental e um controle foram aleatoriamente distribuídos entre os espécimes que foram usados pelos voluntários: Grupo I, sem qualquer tratamento, controle; Grupo II, processo de cárie artificial; Grupo III, igual ao Grupo II, porém selados com Delton (Dentsply; Grupo IV, igual ao Grupo II, porém selados com Fuji IX (GC Corporation - Japão; Grupo V, igual ao Grupo II, mas sem selamento. Os Grupos I e II não foram submetidos ao meio bucal e serviram de controle. Após um período de trinta dias no meio bucal, os espécimes foram removidos dos dispositivos, montados em resina acrílica, planificados e polidos. Realizaram-se então testes de Dureza Knoop com carga estática de 25 g por 15 segundos. As medidas foram realizadas desde a base da fissura até uma abertura de 600 µm, preestabelecida entre os planos inclinados das cúspides. A cada 100 µm, três penetrações foram realizadas: a primeira a 25 µm da superfície da fissura, a segunda a 75 µm, e a terceira a 125 µm (Micromet 2003. Os dados obtidos foram analisados estatisticamente pelos testes "F" de Brieger e de Bonferroni. Concluiu-se que o selamento com o cimento de ionômero de vidro Fuji IX foi capaz de tornar o esmalte de sulcos e fissuras mais resistente pelo aumento do valor de dureza Knoop.

  11. Cathode and ion-luminescence of Eu:ZnO thin films prepared by reactive magnetron sputtering and plasma decomposition of non-volatile precursors

    Energy Technology Data Exchange (ETDEWEB)

    Gil-Rostra, Jorge [Instituto de Ciencia de Materiales de Sevilla, CSIC, Univ. Sevilla, C/Américo Vespucio 49, E-41092 Sevilla (Spain); Ferrer, Francisco J. [Centro Nacional de Aceleradores, CSIC, Univ. Sevilla, Av. Thomas A. Edison 7, E-41092 Sevilla (Spain); Martín, Inocencio R. [Departamento de Física Fundamental y Experimental, Electrónica y Sistemas, U. La Laguna, C/Astrofísico Francisco Sánchez s/n, E-38206 La Laguna, Santa Cruz de Tenerife (Spain); González-Elipe, Agustín R.; Yubero, Francisco [Instituto de Ciencia de Materiales de Sevilla, CSIC, Univ. Sevilla, C/Américo Vespucio 49, E-41092 Sevilla (Spain)

    2016-10-15

    This paper reports the luminescent behavior of Eu:ZnO thin films prepared by an one-step procedure that combines reactive magnetron sputtering deposition of ZnO with the plasma activated decomposition of a non-volatile acetylacetonate precursor of Eu sublimated in an effusion cell. Chemical composition and microstructure of the Eu:ZnO thin films have been characterized by several methods and their photo-, cathode- and ion-luminescent properties studied as a function of Eu concentration. The high transparency and well controlled optical properties of the films have demonstrated to be ideal for the development of cathode- and ion- luminescence sensors.

  12. Global Structural Flexibility of Metalloproteins Regulates Reactivity of Transition Metal Ion in the Protein Core: An Experimental Study Using Thiol-subtilisin as a Model Protein.

    Science.gov (United States)

    Matsuo, Takashi; Kono, Takamasa; Shobu, Isamu; Ishida, Masaya; Gonda, Katsuya; Hirota, Shun

    2018-02-21

    The functions of metal-containing proteins (metalloproteins) are determined by the reactivities of transition metal ions at their active sites. Because protein macromolecular structures have several molecular degrees of freedom, global structural flexibility may also regulate the properties of metalloproteins. However, the influence of this factor has not been fully delineated in mechanistic studies of metalloproteins. Accordingly, we have investigated the relationship between global protein flexibility and the characteristics of a transition metal ion in the protein core using thiol-subtilisin (tSTL) with a Cys-coordinated Cu 2+ ion as a model system. Although tSTL has two Ca 2+ -binding sites, the Ca 2+ -binding status hardly affects its secondary structure. Nevertheless, guanidinium-induced denaturation and amide H/D exchange indicated the increase in the structural flexibility of tSTL by the removal of bound Ca 2+ ions. Electron paramagnetic resonance and absorption spectral changes have revealed that the protein flexibility determines the characteristics of a Cu 2+ ion in tSTL. Therefore, global protein flexibility should be recognized as an important factor that regulates the properties of metalloproteins. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Deposition and characterization of zirconium nitride (ZrN) thin films by reactive magnetron sputtering with linear gas ion source and bias voltage

    Energy Technology Data Exchange (ETDEWEB)

    Kavitha, A.; Kannan, R. [Department of Physics, University College of Engineering, Anna University, Dindugal-624622 (India); Subramanian, N. Sankara [Department of Physics, Thiagarajar College of Engineering, Madurai -625015, Tamilnadu (India); Loganathan, S. [Ion Plating, Titan Industries Ltd., Hosur - 635126, Tamilnadu (India)

    2014-04-24

    Zirconium nitride thin films have been prepared on stainless steel substrate (304L grade) by reactive cylindrical magnetron sputtering method with Gas Ion Source (GIS) and bias voltage using optimized coating parameters. The structure and surface morphologies of the ZrN films were characterized using X-ray diffraction, atomic microscopy and scanning electron microscopy. The adhesion property of ZrN thin film has been increased due to the GIS. The coating exhibits better adhesion strength up to 10 N whereas the ZrN thin film with bias voltage exhibits adhesion up to 500 mN.

  14. Investigation of reactivity of inorganic free radicals relative to ferrocyanide- and octacyanomolybdate-ions in aqueous solutions by the method of pulse radiolysis

    International Nuclear Information System (INIS)

    Gogolev, A.V.; Fedoseev, A.M.; Makarov, I.F.; Pikaev, A.K.

    1989-01-01

    In aqueous solutions by the method of pulse radiolysis (dose per impulse-7.96-47.8 Gy, electron energy-5 MeV) the reactivity of Cl 2 - , Br 2 - , I 2 - , (SCN) 2 - , CO 3 - , SeO 3 - , SO 4 - radicals towards ferrocyanide ions and of Br 2 - , CO 3 - , SO 4 - radicals tawards octacyanomolybdate ions is studied. Linear dependence of rate constant logarithm of Cl 2 - , Br 2 - , I 2 - reactions with cyanide complexes on the difference of redox potentials of reacting particles ΔE 0 is obtained. Radicals containing oxygen react with cyanide complexes more rapidly than can be expected on the basis of ΔE 0 values. The effect of solution ionic strength, charge of reacting particles and radical nature on the reaction rate is discussed

  15. A novel ion transport membrane reactor for fundamental investigations of oxygen permeation and oxy-combustion under reactive flow conditions

    KAUST Repository

    Kirchen, Patrick; Apo, Daniel J.; Hunt, Anton; Ghoniem, Ahmed F.

    2013-01-01

    Ion transport membrane (ITM) reactors present an attractive technology for combined air separation and fuel conversion in applications such as syngas production, oxidative coupling or oxy-combustion, with the promise of lower capital and operating

  16. Experimental Physical Sciences Vistas: MaRIE (draft)

    Energy Technology Data Exchange (ETDEWEB)

    Shlachter, Jack [Los Alamos National Laboratory

    2010-09-08

    To achieve breakthrough scientific discoveries in the 21st century, a convergence and integration of world-leading experimental facilities and capabilities with theory, modeling, and simulation is necessary. In this issue of Experimental Physical Sciences Vistas, I am excited to present our plans for Los Alamos National Laboratory's future flagship experimental facility, MaRIE (Matter-Radiation Interactions in Extremes). MaRIE is a facility that will provide transformational understanding of matter in extreme conditions required to reduce or resolve key weapons performance uncertainties, develop the materials needed for advanced energy systems, and transform our ability to create materials by design. Our unique role in materials science starting with the Manhattan Project has positioned us well to develop a contemporary materials strategy pushing the frontiers of controlled functionality - the design and tailoring of a material for the unique demands of a specific application. Controlled functionality requires improvement in understanding of the structure and properties of materials in order to synthesize and process materials with unique characteristics. In the nuclear weapons program today, improving data and models to increase confidence in the stockpile can take years from concept to new knowledge. Our goal with MaRIE is to accelerate this process by enhancing predictive capability - the ability to compute a priori the observables of an experiment or test and pertinent confidence intervals using verified and validated simulation tools. It is a science-based approach that includes the use of advanced experimental tools, theoretical models, and multi-physics codes, simultaneously dealing with multiple aspects of physical operation of a system that are needed to develop an increasingly mature predictive capability. This same approach is needed to accelerate improvements to other systems such as nuclear reactors. MaRIE will be valuable to many national

  17. Encefalomielite aguda disseminada - série de casos

    Directory of Open Access Journals (Sweden)

    Maria Miguel Gomes

    2017-07-01

    Conclusões: A análise desta série de casos sugere que a presença de infeção esteja associada à etiologia da ADEM. A RMN foi o estudo de escolha para diagnóstico e seguimento. O prognóstico foi excelente. A distinção entre ADEM e EM permanece um desafio.

  18. Methods and apparatus for cleaning objects in a chamber of an optical instrument by generating reactive ions using photon radiation

    Science.gov (United States)

    Klebanoff, Leonard E.; Delgado, Gildardo R.; Hollenshead, Jeromy T.; Umstadter, Karl R.; Starodub, Elena; Zhuang, Guorong V.

    2015-10-13

    An optical instrument, including a chamber, an object exposed to an interior of the chamber, a source of low-pressure gas, the gas comprising at least one of low-pressure molecular hydrogen gas, low-pressure molecular oxygen and a low-pressure noble gas, the source of low pressure gas being fluidly coupled to the chamber, a low voltage source electrically coupled between the object and a remaining portion of the instrument that is exposed to the interior of the chamber so as to maintain the object at a low voltage relative to the remaining portion, and an EUV/VUV light source adapted to direct EUV/VUV light through the low pressure gas in the chamber onto the object. In such a system, when the EUV/VUV light source is activated ions of the low-pressure gas are formed and directed to the object. The ions may be ions of Hydrogen, Oxygen or a noble gas.

  19. Microwave-assisted reactive sintering and lithium ion conductivity of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte

    Science.gov (United States)

    Hallopeau, Leopold; Bregiroux, Damien; Rousse, Gwenaëlle; Portehault, David; Stevens, Philippe; Toussaint, Gwenaëlle; Laberty-Robert, Christel

    2018-02-01

    Li1.3Al0.3Ti1.7(PO4)3 (LATP) materials are made of a three-dimensional framework of TiO6 octahedra and PO4 tetrahedra, which provides several positions for Li+ ions. The resulting high ionic conductivity is promising to yield electrolytes for all-solid-state Li-ion batteries. In order to elaborate dense ceramics, conventional sintering methods often use high temperature (≥1000 °C) with long dwelling times (several hours) to achieve high relative density (∼90%). In this work, an innovative synthesis and processing approach is proposed. A fast and easy processing technique called microwave-assisted reactive sintering is used to both synthesize and sinter LATP ceramics with suitable properties in one single step. Pure and crystalline LATP ceramics can be achieved in only 10 min at 890 °C starting from amorphous, compacted LATP's precursors powders. Despite a relative density of 88%, the ionic conductivity measured at ambient temperature (3.15 × 10-4 S cm-1) is among the best reported so far. The study of the activation energy for Li+ conduction confirms the high quality of the ceramic (purity and crystallinity) achieved by using this new approach, thus emphasizing its interest for making ion-conducting ceramics in a simple and fast way.

  20. Deep Reactive Ion Etching (DRIE) of High Aspect Ratio SiC Microstructures using a Time-Multiplexed Etch-Passivate Process

    Science.gov (United States)

    Evans, Laura J.; Beheim, Glenn M.

    2006-01-01

    High aspect ratio silicon carbide (SiC) microstructures are needed for microengines and other harsh environment micro-electro-mechanical systems (MEMS). Previously, deep reactive ion etching (DRIE) of low aspect ratio (AR less than or = 1) deep (greater than 100 micron) trenches in SiC has been reported. However, existing DRIE processes for SiC are not well-suited for definition of high aspect ratio features because such simple etch-only processes provide insufficient control over sidewall roughness and slope. Therefore, we have investigated the use of a time-multiplexed etch-passivate (TMEP) process, which alternates etching with polymer passivation of the etch sidewalls. An optimized TMEP process was used to etch high aspect ratio (AR greater than 5) deep (less than 100 micron) trenches in 6H-SiC. Power MEMS structures (micro turbine blades) in 6H-SiC were also fabricated.

  1. Study by γ radiolysis and pulsed radiolysis of the reactivity of the superoxide ion in the oxyhemoglobin-methemoglobin system

    International Nuclear Information System (INIS)

    Haristoy, Didier.

    1976-01-01

    γ radiolysis of aqueous solutions of methemoglobin (MetHb) in the presence of formate ions, shows that only 25% of the total protein is reduced in oxyhemoglobin (HbO 2 ) by superoxide ions O 2 - according to the reaction MetHb+O 2 - →HbO 2 . The result can be attributed neither to the reactions of O 2 - with HbO 2 , nor the oxidation of HbO 2 by H 2 O 2 produced in the radiolysis of water and by dismutation of O 2 - . Pulse radiolysis studies of this reaction strongly suggest the formation of a transient complex 'MetHbO 2 - ' during the reaction. In addition to the well known self-oxidation of HbO 2 , these results show the existence of an equilibrium between HbO 2 and MetHb+O 2 - . Such an equilibrium could give rise, 'in vivo' to a nearly steady concentration of superoxide ions which could initiate a reaction favoring oxidation by oxygen [fr

  2. PVP-coated silver nanoparticles and silver ions induce reactive oxygen species, apoptosis and necrosis in THP-1 monocytes

    DEFF Research Database (Denmark)

    Foldbjerg, Rasmus; Olesen, Ping Liu; Hougaard, Mads

    2009-01-01

    , both Ag NPs and Ag+ were shown to induce apoptosis and necrosis in THP-1 cells depending on dose and exposure time. Furthermore, the presence of apoptosis could be confirmed by the TUNEL method. A number of studies have implicated the production of reactive oxygen species (ROS) in cytotoxicity mediated...... the effect of well characterized, PVP-coated Ag NPs (69 nm ± 3 nm) and Ag+ in a human monocytic cell line (THP-1). Characterization of the Ag NPs was conducted in both stock suspension and cell media with or without serum and antibiotics. By using the flowcytometric annexin V/propidium iodide (PI) assay...... by NPs. We used the fluorogenic probe, 2′,7′-dichlorofluorescein to assess the levels of intracellular ROS during exposure to Ag NPs and Ag+. A drastic increase in ROS levels could be detected after 6–24 h suggesting that oxidative stress is an important mediator of cytotoxicity caused by Ag NPs and Ag+....

  3. A Study of Moroccan Pupils' Difficulties at Second Baccalaureate Year in Solving Chemistry Problems Relating to the Reactivity of Ethanoate Ions and to Copper-Aluminium Cells

    Science.gov (United States)

    Ouasri, Ali

    2017-01-01

    This paper investigates the difficulties that Moroccan pupils (18-19) of the second Baccalaureate year encountered in solving chemical equilibrium problems relating to ethanoate ions' reactivity with water and methanoic acid, and to copper-aluminum cells. The pupils were asked to provide answers to questions derived from two problems. The…

  4. Digital Risk Inventory and Evaluation (RIE) : a Dutch approach offering valuable support for small business owners

    NARCIS (Netherlands)

    Meeuwsen, J.M.

    2008-01-01

    The Dutch Working Conditions Act requires employers to perform a Risk Inventory and Evaluation (RIE). Until recently, small business owners (SMEs) in particular were unhappy about this rather time-consuming obligation. However, the introduction of digital RIE instruments disseminated through the web

  5. A novel ion transport membrane reactor for fundamental investigations of oxygen permeation and oxy-combustion under reactive flow conditions

    KAUST Repository

    Kirchen, Patrick

    2013-01-01

    Ion transport membrane (ITM) reactors present an attractive technology for combined air separation and fuel conversion in applications such as syngas production, oxidative coupling or oxy-combustion, with the promise of lower capital and operating costs, as well higher product selectivities than traditional technologies. The oxygen permeation rate through a given ITM is defined by the membrane temperature and oxygen chemical potential difference across it. Both of these parameters can be strongly influenced by thermochemical reactions occurring in the vicinity of the membrane, though in the literature they are often characterized in terms of the well mixed product stream at the reactor exit. This work presents the development of a novel ITM reactor for the fundamental investigation of the coupling between fuel conversion and oxygen permeation under well defined fluid dynamic and thermodynamic conditions, including provisions for spatially resolved, in-situ investigations. A planar, finite gap stagnation flow reactor with optical and probe access to the reaction zone is used to facilitate in-situ measurements and cross-validation with detailed numerical simulations. Using this novel reactor, baseline measurements are presented to elucidate the impact of the sweep gas fuel (CH4) fraction on the oxygen permeation and fuel conversion. In addition, the difference between well-mixed gas compositions measured at the reactor outlet and those measured in the vicinity of the membrane surface are discussed, demonstrating the unique utility of the reactor. © 2012 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

  6. Removal of heavy metal ions by magnetic chitosan nanoparticles prepared continuously via high-gravity reactive precipitation method.

    Science.gov (United States)

    Fan, Hong-Lei; Zhou, Shao-Feng; Jiao, Wei-Zhou; Qi, Gui-Sheng; Liu, You-Zhi

    2017-10-15

    This study aimed to provide a continuous method for the preparation of magnetic Fe 3 O 4 /Chitosan nanoparticles (Fe 3 O 4 /CS NPs) that can be applied to efficient removal of heavy metal ions from aqueous solution. Using a novel impinging stream-rotating packed bed, the continuous preparation of Fe 3 O 4 /CS NPs reached a theoretical production rate of 3.43kg/h. The as-prepared Fe 3 O 4 /CS NPs were quasi-spherical with average diameter of about 18nm and saturation magnetization of 33.5emu/g. Owing to the strong metal chelating ability of chitosan, the Fe 3 O 4 /CS NPs exhibited better adsorption capacity and faster adsorption rates for Pb(II) and Cd(II) than those of pure Fe 3 O 4 . The maximum adsorption capacities of Fe 3 O 4 /CS NPs for Pb(II) and Cd(II) were 79.24 and 36.42mgg -1 , respectively. In addition, the Fe 3 O 4 /CS NPs shown excellent reusability after five adsorption-desorption cycles. All the above results provided a potential method for continuously preparing recyclable adsorbent with a wide prospect of application in wastewater treatment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. The most reactive third-row transition metal: Guided ion beam and theoretical studies of the activation of methane by Ir+

    Science.gov (United States)

    Li, Feng-Xia; Zhang, Xiao-Guang; Armentrout, P. B.

    2006-09-01

    The potential energy surface for activation of methane by the third-row transition metal cation, Ir+, is studied experimentally by examining the kinetic energy dependence of reactions of Ir+ with methane, IrCH2+ with H2 and D2, and collision-induced dissociation of IrCH2+ with Xe using guided ion beam tandem mass spectrometry. A flow tube ion source produces Ir+ in its electronic ground state term and primarily in the ground spin-orbit level. We find that dehydrogenation to form IrCH2+ + H2 is exothermic, efficient, and the only process observed at low energies for reaction of Ir+ with methane, whereas IrH+ dominates the product spectrum at higher energies. We also observe the IrH2+ product, which provides evidence that methane activation proceeds via a dihydride (H)2IrCH2+ intermediate. The kinetic energy dependences of the cross sections for several endothermic reactions are analyzed to give 0 K bond dissociation energies (in eV) of D0(Ir+-2H) > 5.09 +/- 0.07, D0(Ir+-C) = 6.59 +/- 0.05, D0(Ir+-CH) = 6.91 +/- 0.23, and D0(Ir+-CH3) = 3.25 +/- 0.18. D0(Ir+-CH2) = 4.92 +/- 0.03 eV is determined by measuring the forward and reverse reaction rates for Ir++CH4[right harpoon over left]IrCH2++H2 at thermal energy. Ab initio calculations at the B3LYP/HW+/6-311++G(3df,3p) level performed here show reasonable agreement with the experimental bond energies and with the few previous experimental and theoretical values available. Theory also provides the electronic structures of the product species as well as intermediates and transition states along the reactive potential energy surfaces. We also compare this third-row transition metal system with the first-row and second-row congeners, Co+ and Rh+. Differences in reactivity and mechanisms can be explained by the lanthanide contraction and relativistic effects that alter the relative size of the valence s and d orbitals.

  8. Influence of substrate pre-treatments by Xe{sup +} ion bombardment and plasma nitriding on the behavior of TiN coatings deposited by plasma reactive sputtering on 100Cr6 steel

    Energy Technology Data Exchange (ETDEWEB)

    Vales, S., E-mail: sandra.vales@usp.br [Universidade de São Paulo (USP), Escola de Engenharia de São Carlos, Av. Trabalhador São Carlense 400, São Carlos, SP CEP 13566-590 (Brazil); Brito, P., E-mail: ppbrito@gmail.com [Pontifícia Universidade Católica de Minas Gerais (PUC-MG), Av. Dom José Gaspar 500, 30535-901 Belo Horizonte, MG (Brazil); Pineda, F.A.G., E-mail: pipe8219@gmail.com [Universidade de São Paulo (USP), Escola de Engenharia de São Carlos, Av. Trabalhador São Carlense 400, São Carlos, SP CEP 13566-590 (Brazil); Ochoa, E.A., E-mail: abigail_ochoa@hotmail.com [Universidade Estadual de Campinas (UNICAMP), Campus Universitário Zeferino Vaz, Barão Geraldo, Campinas, SP CEP 13083-970 (Brazil); Droppa, R., E-mail: roosevelt.droppa@ufabc.edu.br [Universidade Federal do ABC (UFABC), Av. dos Estados, 5001, Santo André, SP CEP 09210-580 (Brazil); Garcia, J., E-mail: jose.garcia@sandvik.com [Sandvik Coromant R& D, Lerkrogsvägen 19, SE-12680, Stockholm (Sweden); Morales, M., E-mail: monieriz@gmail.com [Universidade Estadual de Campinas (UNICAMP), Campus Universitário Zeferino Vaz, Barão Geraldo, Campinas, SP CEP 13083-970 (Brazil); Alvarez, F., E-mail: alvarez@ifi.unicamp.br [Universidade Estadual de Campinas (UNICAMP), Campus Universitário Zeferino Vaz, Barão Geraldo, Campinas, SP CEP 13083-970 (Brazil); and others

    2016-07-01

    In this paper the influence of pre-treating a 100Cr6 steel surface by Xe{sup +} ion bombardment and plasma nitriding at low temperature (380 °C) on the roughness, wear resistance and residual stresses of thin TiN coatings deposited by reactive IBAD was investigated. The Xe{sup +} ion bombardment was carried out using a 1.0 keV kinetic energy by a broad ion beam assistance deposition (IBAD, Kaufman cell). The results showed that in the studied experimental conditions the ion bombardment intensifies nitrogen diffusion by creating lattice imperfections, stress, and increasing roughness. In case of the combined pre-treatment with Xe{sup +} ion bombardment and subsequent plasma nitriding, the samples evolved relatively high average roughness and the wear volume increased in comparison to the substrates exposed to only nitriding or ion bombardment. - Highlights: • Effect of Xe ion bombardment and plasma nitriding on TiN coatings was investigated. • Xe ion bombardment with 1.0 KeV increases nitrogen retention in plasma nitriding. • 1.0 KeV ion impact energy causes sputtering, thus increasing surface roughness. • TiN coating wear is minimum after plasma nitriding due to lowest roughness.

  9. RIES - Rijnland Internet Election System: A Cursory Study of Published Source Code

    Science.gov (United States)

    Gonggrijp, Rop; Hengeveld, Willem-Jan; Hotting, Eelco; Schmidt, Sebastian; Weidemann, Frederik

    The Rijnland Internet Election System (RIES) is a system designed for voting in public elections over the internet. A rather cursory scan of the source code to RIES showed a significant lack of security-awareness among the programmers which - among other things - appears to have left RIES vulnerable to near-trivial attacks. If it had not been for independent studies finding problems, RIES would have been used in the 2008 Water Board elections, possibly handling a million votes or more. While RIES was more extensively studied to find cryptographic shortcomings, our work shows that more down-to-earth secure design practices can be at least as important, and the aspects need to be examined much sooner than right before an election.

  10. Ion beam analysis, corrosion resistance and nanomechanical properties of TiAlCN/CN{sub x} multilayer grown by reactive magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Alemón, B.; Flores, M. [Departamento de Ingeniería de Proyectos, CUCEI, Universidad de Guadalajara, J. Guadalupe Zuno 48, Los Belenes, Zapopan, Jal. 45101 (Mexico); Canto, C. [Instituto de Física, UNAM, Avenida de la Investigación S/N, Coyoacán, Mexico, DF 04510 (Mexico); Andrade, E., E-mail: andrade@fisica.unam.mx [Instituto de Física, UNAM, Avenida de la Investigación S/N, Coyoacán, Mexico, DF 04510 (Mexico); Lucio, O.G. de [Instituto de Física, UNAM, Avenida de la Investigación S/N, Coyoacán, Mexico, DF 04510 (Mexico); Rocha, M.F. [ESIME-Z, Instituto Politécnico Nacional, ALM Zacatenco, Mexico, DF 07738 (Mexico); Broitman, E. [Thin Films Physics Division, IFM, Linköping University, SE-58183 Linköping (Sweden)

    2014-07-15

    A novel TiAlCN/CN{sub x} multilayer coating, consisting of nine TiAlCN/CN{sub x} periods with a top layer 0.5 μm of CN{sub x}, was designed to enhance the corrosion resistance of CoCrMo biomedical alloy. The multilayers were deposited by dc and RF reactive magnetron sputtering from Ti{sub 0.5}Al{sub 0.5} and C targets respectively in a N{sub 2}/Ar plasma. The corrosion resistance and mechanical properties of the multilayer coatings were analyzed and compared to CoCrMo bulk alloy. Ion beam analysis (IBA) and X-ray diffraction tests were used to measure the element composition profiles and crystalline structure of the films. Corrosion resistance was evaluated by means of potentiodynamic polarization measurements using simulated body fluid (SBF) at typical body temperature and the nanomechanical properties of the multilayer evaluated by nanoindentation tests were analyzed and compared to CoCrMo bulk alloy. It was found that the multilayer hardness and the elastic recovery are higher than the substrate of CoCrMo. Furthermore the coated substrate shows a better general corrosion resistance than that of the CoCrMo alloy alone with no observation of pitting corrosion.

  11. Effect of titanium incorporation on the structural, mechanical and biocompatible properties of DLC thin films prepared by reactive-biased target ion beam deposition method

    Energy Technology Data Exchange (ETDEWEB)

    Bharathy, P. Vijai [Thin Films and Nanomaterials Lab, School of Physical Sciences, Bharathiar University, Coimbatore 641046 (India); Department of Mechanical Engineering, University of Saskatchewan, Saskatoon (Canada); Nataraj, D., E-mail: de.natraj@gmail.com [Thin Films and Nanomaterials Lab, School of Physical Sciences, Bharathiar University, Coimbatore 641046 (India); Chu, Paul K.; Wang, Huaiyu [Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon (Hong Kong); Yang, Q. [Department of Mechanical Engineering, University of Saskatchewan, Saskatoon (Canada); Kiran, M.S.R.N. [School of Physics, University of Hyderabad, Hyderabad, Andra Pradesh (India); Silvestre-Albero, J. [Laboratorio de Materiales Avanzados, Departmento de Quimica Inorganica, Universidad de Alicante, Ap 99, E-03080 Alicante (Spain); Mangalaraj, D. [Thin Films and Nanomaterials Lab, School of Physical Sciences, Bharathiar University, Coimbatore 641046 (India)

    2010-10-15

    Amorphous diamond like carbon (DLC) and titanium incorporated diamond like carbon (Ti-DLC) thin films were deposited by using reactive-biased target ion beam deposition method. The effects of Ti incorporation and target bias voltage on the microstructure and mechanical properties of the as-deposited films were investigated by means of X-ray photoelectron spectroscopy, Raman spectroscopy, transmission electron microscopy and nano-indentation. It was found that the Ti content in Ti-DLC films gets increased with increasing target bias voltage. At about 4.2 at.% of Ti, uniform sized well dispersed nanocrystals were seen in the DLC matrix. Using FFT analysis, a facility available in the TEM, it was found that the nanocrystals are in cubic TiC phase. Though at the core, the incorporated Ti atoms react with carbon to form cubic TiC; most of the surface exposed Ti atoms were found to react with the atmospheric oxygen to form weakly bonded Ti-O. The presence of TiC nanocrystals greatly modified the sp{sup 3}/sp{sup 2} hybridized bonding ratio and is reflected in mechanical hardness of Ti-DLC films. These films were then tested for their biocompatibility by an invitro cell culturing test. Morphological observation and the cell proliferation test have demonstrated that the human osteoblast cells well attach and proliferate on the surface of Ti incorporated DLC films, suggesting possible applications in bone related implant coatings.

  12. Effect of titanium incorporation on the structural, mechanical and biocompatible properties of DLC thin films prepared by reactive-biased target ion beam deposition method

    International Nuclear Information System (INIS)

    Bharathy, P. Vijai; Nataraj, D.; Chu, Paul K.; Wang, Huaiyu; Yang, Q.; Kiran, M.S.R.N.; Silvestre-Albero, J.; Mangalaraj, D.

    2010-01-01

    Amorphous diamond like carbon (DLC) and titanium incorporated diamond like carbon (Ti-DLC) thin films were deposited by using reactive-biased target ion beam deposition method. The effects of Ti incorporation and target bias voltage on the microstructure and mechanical properties of the as-deposited films were investigated by means of X-ray photoelectron spectroscopy, Raman spectroscopy, transmission electron microscopy and nano-indentation. It was found that the Ti content in Ti-DLC films gets increased with increasing target bias voltage. At about 4.2 at.% of Ti, uniform sized well dispersed nanocrystals were seen in the DLC matrix. Using FFT analysis, a facility available in the TEM, it was found that the nanocrystals are in cubic TiC phase. Though at the core, the incorporated Ti atoms react with carbon to form cubic TiC; most of the surface exposed Ti atoms were found to react with the atmospheric oxygen to form weakly bonded Ti-O. The presence of TiC nanocrystals greatly modified the sp 3 /sp 2 hybridized bonding ratio and is reflected in mechanical hardness of Ti-DLC films. These films were then tested for their biocompatibility by an invitro cell culturing test. Morphological observation and the cell proliferation test have demonstrated that the human osteoblast cells well attach and proliferate on the surface of Ti incorporated DLC films, suggesting possible applications in bone related implant coatings.

  13. Molecular Characterization and Reactivity of Dissolved Organic Matter by High Resolution Nanospray Ionization Fourier Transform-Ion Cyclotron Resonance Mass Spectrometry (FTICR-MS)

    Science.gov (United States)

    Sleighter, R. L.; Hatcher, S. A.; Hatcher, P. G.

    2006-12-01

    The ultrahigh resolving power of FTICR-MS allows for the intense characterization of dissolved organic matter (DOM). DOM is the largest reactive component of the global carbon cycle, and an improved understanding of its composition is necessary to determine the transport and eventual fate of pollutants. The seasonal and spatial variations in DOM composition are investigated by taking surface water samples from five different sampling sites, four times a year. Water sampling begins at the Dismal Swamp in North Carolina, continues north up the Elizabeth River to the Chesapeake Bay, and concludes approximately ten miles off the coast in the Atlantic Ocean. DOM was extracted from the water samples using C18 extraction disks and were prepared in 50:50 methanol:water. Ammonium hydroxide was added prior to nanospray in order to solubilize the DOM as well as to increase the ionization efficiency. The samples were continuously infused into the Apollo II ion source with an Advion TriVersa NanoMate system of a Bruker 12 Tesla Apex QE FTICR-MS with resolving powers exceeding 400,000. All samples were analyzed in negative ion mode and were externally and internally calibrated prior to data analysis. Our DOM mass spectra consist of a multitude of peaks spanning the range of 200-850 m/z. Complexity is apparent from the detection of up to 20 peaks per nominal mass at nearly every mass throughout that range. A molecular formula calculator generated molecular formula matches from which van Krevelen plots were constructed for characterization purposes. A wide range of molecules were observed each containing oxygen, sulfur and nitrogen functional groups. We utilize the van Krevelen diagram to assist in clustering the molecules according to their functional group compositions. To test the hypothesis that formation of adducts to DOM serve to protect peptides from bacterial degradation, microcosm experiments were performed with a small isotopically enriched peptide, GGGR. This peptide

  14. Trichomonas vaginalis induces IL-1β production in a human prostate epithelial cell line by activating the NLRP3 inflammasome via reactive oxygen species and potassium ion efflux.

    Science.gov (United States)

    Gu, Na-Yeong; Kim, Jung-Hyun; Han, Ik-Hwan; Im, Su-Jeong; Seo, Min-Young; Chung, Yong-Hoon; Ryu, Jae-Sook

    2016-07-01

    Trichomonas vaginalis is a sexually transmitted protozoan parasite that causes vaginitis in women, and urethritis and prostatitis in men. IL-1β is synthesized as immature pro-IL-1β, which is cleaved by activated caspase-1. Caspase-1 is, in turn, activated by a multi-protein complex known as an inflammasome. In this study, we investigated the inflammatory response of a prostate epithelial cell line (RWPE-1) to T. vaginalis and, specifically, the capacity of T. vaginalis to activate the NLRP3 inflammasome. RWPE-1 cells were stimulated by live T. vaginalis, and subsequent expression of pro-IL-1β, IL-1β, NLRP3, ASC and caspase-1 was determined by real-time PCR and Western blotting. IL-1β and caspase-1 production was also measured by ELISA. To evaluate the effects of NLRP3 and caspase-1 on IL-1β production, the activated RWPE-1 cells were transfected with small interfering RNAs to silence the NLRP3 and caspase-1 genes. Activation of the NLRP3 inflammasome was observed by fluorescence microscopy. Intracellular reactive oxygen species (ROS) were evaluated by spectrofluorometry. When RWPE-1 cells were stimulated with live T. vaginalis, the mRNA and protein expression of IL-1β, NLRP3, ASC, and caspase-1 increased. Moreover, silencing of NLRP3 and caspase-1 attenuated T. vaginalis-induced IL-1β secretion. The NADPH oxidase inhibitor DPI and high extracellular potassium ion suppressed the production of IL-1β, caspase-1, and the expression of NLRP3 and ASC proteins. The specific NF-κB inhibitor, Bay 11-7082, inhibited IL-1β production, and also inhibited the production of caspase-1, ASC and NLRP3 proteins. T. vaginalis induces the formation of the NLRP3 inflammasome in human prostate epithelial cells via ROS and potassium ion efflux, and this results in IL-1β production. This is the first evidence for activation of the NLRP3 inflammasome in the inflammatory response by prostate epithelial cells infected with T. vaginalis. Prostate 76:885-896, 2016. © 2016 Wiley

  15. Glass Spherules in Badenian Siliciclastics and Carbonates of N. Croatia, Possible Ries Crater Distal Ejecta

    Science.gov (United States)

    Calogovic, M.; Marjanac, T.; Fazinic, S.; Sremac, J.; Bosnjak, M.; Bosak, L.

    2017-07-01

    We have found glass spherules in Badenian sediments at three locations in Northern Croatia that are good candidates for Ries Crater distal ejecta. Their chemical composition generally fits the composition of suevite glass.

  16. The Mesoscale Science of the Matter-Radiation Interactions in Extremes (MaRIE) project

    Energy Technology Data Exchange (ETDEWEB)

    Kippen, Karen Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Montoya, Donald Raymond [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-08-17

    The National Nuclear Security Administration (NNSA) requires the ability to understand and test how material structures, defects, and interfaces determine performance in extreme environments such as in nuclear weapons. To do this, MaRIE will be an x-ray source that is laser-like and brilliant with very fl exible and fast pulses to see at weapons-relevant time scales, and with high enough energy to study critical materials. The Department of Energy (DOE) has determined there is a mission need for MaRIE to deliver this capability. MaRIE can use some of the existing infrastructure of the Los Alamos Neutron Science Center (LANSCE) and its accelerator capability. MaRIE will be built as a strategic partnership of DOE national laboratories and university collaborators.

  17. De la fermentiscibilité malolactique des vins : interactions levures-bactéries

    Directory of Open Access Journals (Sweden)

    Simone LAFON-LAFOURCADE

    1973-09-01

    Full Text Available Les phénomènes d'antagonisme levures-bactéries dans les vins ont été décrits pour la première fois par PASTEUR en 1873. Plus récemment, MILISAVLJEVIC (1958, FLESCH et JERCHEL (1960 ont montré que le temps de latence de la fermentation malolactique était lié en particulier à la souche de levure impliquée dans la fermentation alcoolique. Peu après RIBEREAU-GAYON et PEYNAUD (1960, PEYNAUD et DUPUY (1964 FORNACHON (1968 ont observé une inhibition totale de certaines bactéries lactiques dans des vins fermentés par des souches déterminées de levures dont quelques-unes appartiennent au genre Saccharomyces ellipsoideus. Par contre, dans une étude détaillée des croissances mixtes levures-bactéries en milieu nutritif sucré, BOIDRON (1969 a relevé une influence favorable des levures sur les bactéries, influence qui s'avère plus ou moins durable selon que les bactéries concernées sont jeunes ou plus âgées. PEYNAUD (1967 a vérifié, par ailleurs, l'efficacité des levains mixtes (levures-bactéries pour l'induction de la fermentation malolactique dans les vins.

  18. Reactivity of nitriles

    International Nuclear Information System (INIS)

    Kukushkin, Yu.N.

    1987-01-01

    Reactivity of coordination nitriles in transition metal (Ru, Mo, W, Zr, Hf) complexes, namely: transformation of nitriles of the first coordination sphere into N-acyl-substituted amides, amidines, nitrile interaction; with water, alkalines, alcoholes, hydrogen, azide and cyanide ions is considered. Introduction of acetonitrile molecule to uranium (4)-carbon double bond is discussed

  19. Accurate calculations of the ground state and low-lying excited states of the (RbBa)+ molecular ion: a proposed system for ultracold reactive collisions

    DEFF Research Database (Denmark)

    Knecht, Stefan; Sørensen, Lasse Kragh; Jensen, Hans Jørgen Aagaard

    2010-01-01

    Collisions of ultracold Ba+ ions on a Rb Bose–Einstein condensate have been suggested as a possible benchmark system for ultracold ion-neutral collision experiments. However, a priori knowledge of the possible processes is desirable. For this purpose, we here present high-level four-component cou...

  20. Effect of oxygen gas and annealing treatment for magnetically enhanced reactive ion etched (Ba0.65,Sr0.35)TiO3 thin films

    International Nuclear Information System (INIS)

    Zhang Baishun; Quan Zuci; Zhang Tianjin; Guo Tao; Mo Shaobo

    2007-01-01

    Sol-gel-derived (Ba 0.65 ,Sr 0.35 )TiO 3 (BST) thin films were etched in CF 4 /Ar and CF 4 /Ar/O 2 plasmas using magnetically enhanced reactive ion etching technology. Experimental results show that adding appropriate O 2 to CF 4 /Ar can better the etching effects of BST films for the increase of etching rate and decrease of etched residues. The maximum etching rate is 8.47 nm/min when CF 4 /Ar/O 2 gas-mixing ratio is equal to 9/36/5. X-ray photoelectron spectroscopy (XPS) data confirm accumulation of reaction products on the etched surface due to low volatility of reaction products such as Ba and Sr fluorides, and these residues could be removed by annealing treatment. The exact peak positions and chemical shifts of the interested elements were deduced by fitting XPS narrow-scan spectra with symmetrical Gaussian-Lorentzian product function for Ba 3d, Sr 3d, and O 1s peaks, meanwhile asymmetrical Gaussian-Lorentzian sum function was used to fit Ti 2p doublet to adjust the multiple splitting and/or shake-up process of transition-metal Ti cations. Compared to the unetched counterparts, the etched Ba 3d 5/2 , Ba 3d 3/2 , Sr 3d 5/2 , Sr 3d 3/2 , Ti 2p 3/2 , Ti 2p 1/2 , and O 1s peaks shift towards higher binding energy regions by amounts of 1.31, 1.30, 0.60, 0.79, 0.09, 0.46, and 0.50 eV, respectively. While the etched Ti 2p 3/2 and Ti 2p 1/2 peaks have small chemical shifts for two reasons. One is that Ti fluoride (TiF z ) is mostly removed from the etched surface because of its higher volatility in the process of thermal desorption. The other is that there is a shift compensation between TiF z and the etched BST matrix in which Ti 4+ cations are partially reduced to form Ti x+ (0 0.65 ,Sr 0.35 )Ti 0.97 O 2.86 , (Ba 0.70 ,Sr 0.30 )Ti 0.24 O 1.39 , and (Ba 0.68 ,Sr 0.32 )Ti 0.95 O 2.74 , and then the average valence of Ti cations is estimated to be +3.84, +3.25, and +3.66 with respect to the electroneutrality principle, respectively. It is inferred that electrical

  1. Electrical properties of reactive-ion-sputtered Al{sub 2}O{sub 3} on 4H-SiC

    Energy Technology Data Exchange (ETDEWEB)

    Shukla, Madhup, E-mail: madhup.iit@gmail.com [Microelectronics and MEMS Laboratory, Electrical Engineering Department, Indian Institute of Technology Madras, Chennai 600036 (India); Dutta, Gourab [Microelectronics and MEMS Laboratory, Electrical Engineering Department, Indian Institute of Technology Madras, Chennai 600036 (India); Mannam, Ramanjaneyulu [Department of Physics and Nano Functional Materials Technology Centre, Indian Institute of Technology Madras, Chennai 600036 (India); DasGupta, Nandita [Microelectronics and MEMS Laboratory, Electrical Engineering Department, Indian Institute of Technology Madras, Chennai 600036 (India)

    2016-05-31

    Al{sub 2}O{sub 3} was deposited on n-type 4H-SiC by reactive-ion-sputtering (RIS) at room temperature using aluminum target and oxygen as a reactant gas. Post deposition oxygen annealing was carried out at a temperature of 1100 °C. Metal-oxide-semiconductor (MOS) test structures were fabricated on 4H-SiC using RIS-Al{sub 2}O{sub 3} as gate dielectric. The C-V characteristics reveal a significant reduction in flat band voltage for oxygen annealed RIS-Al{sub 2}O{sub 3} samples (V{sub fb} = 1.95 V) compared to as-deposited Al{sub 2}O{sub 3} samples (V{sub fb} > 10 V), suggesting a reduction in negative oxide charge after oxygen annealing. Oxygen annealed RIS-Al{sub 2}O{sub 3} samples also showed significant improvement in I-V characteristics compared to as-deposited RIS-Al{sub 2}O{sub 3} samples. A systematic analysis was carried out to investigate the leakage current mechanisms present in oxygen annealed RIS-Al{sub 2}O{sub 3} on 4H-SiC at higher gate electric field and at different operating temperature. For measurement temperature (T) < 303 K, Fowler–Nordheim (FN) tunneling was found to be the dominant leakage mechanism and for higher temperature (T ≥ 303 K), a combination of FN tunneling and Poole-Frenkel (PF) emission was confirmed. The improvement in I-V characteristics of oxygen annealed RIS-Al{sub 2}O{sub 3}/4H-SiC MOS devices is attributed to large effective barrier height (Φ{sub B} = 2.53 eV) at Al{sub 2}O{sub 3}/SiC interface, due to the formation of an interfacial SiO{sub 2} layer during oxygen annealing, as confirmed from X-ray Photoelectron Spectroscopy results. Further improvement in C-V characteristics for oxygen annealed RIS-Al{sub 2}O{sub 3}/4H-SiC MOS devices was observed after forming gas annealing at 400 °C. - Highlights: • O{sub 2} annealed RIS-Al{sub 2}O{sub 3} on 4H-SiC showed better performance than other reported result. • FN, FN + PF tunneling was found in O{sub 2} annealed RIS-Al{sub 2}O{sub 3} for different temp. ranges. • Al

  2. Disseny d’una sèrie de motors de baixa velocitat i parell elevat

    OpenAIRE

    Arranz Bernal, Guillermo

    2016-01-01

    El present projecte té com a principal objectiu el disseny d’una sèrie formada per nou motors de baixa velocitat i elevat parell, coneguts com Direct Drive o Motors Torque. Aquests motors seran d’una tipologia de màquina síncrona amb imants permanents interiors/exteriors de Neodimi amb un bobinat concentrat. El punt de partida són les especificacions de parell i velocitat juntament amb les limitacions econòmiques específiques per aquesta sèrie sencera. A més, aquesta tind...

  3. Deposition of single-layer and graded aluminum nitride coatings on vanadium substrates using ion-beam assisted reactive evaporation (ITER task no. ETA-EC-BLR26)

    International Nuclear Information System (INIS)

    Jamarani, F.; Lang, R.; Owles, R.

    1994-06-01

    The objective of the project has been to develop a reactive evaporation process for the fabrication of aluminum nitride coatings on pure vanadium substrates. The aluminum nitride coatings are to be used as electrical insulators on the surfaces of structural materials in contact with liquid metal coolants. (author). 9 refs., 2 tabs., 5 figs

  4. Rôle des bactéries sulfurogènes dans la corrosion du fer Involvment of Sulfidogenic Bacteria in Iron Corrosion

    Directory of Open Access Journals (Sweden)

    Marchal R.

    2006-12-01

    Full Text Available Cet article fait le point sur les connaissances concernant l'implication des bactéries sulfurogènes dans la corrosion des aciers au carbone. Après la description de quelques cas récents tirés de l'industrie pétrolière, la physiologie des bactéries sulfurogènes qui jouent le rôle principal dans le mécanisme de la corrosion anaérobie d'origine bactérienne est examinée. La participation des bactéries productrices d'H2S à la constitution de biofilms est une condition importante à la manifestation des phénomènes de corrosion. Les différentes hypothèses de mécanismes décrites par la littérature sont passées en revue. Indépendamment du rôle physicochirnique joué par les sulfures de fer, non couvrants, bons conducteurs électriques, il en ressort que l'acidification résultant du métabolisme cellulaire est un facteur crucial, non seulement en termes d'électrochimie, mais également en termes de croissance microbienne. L'acidification métabolique explique vraisemblablement la fourniture des ions ferreux pour le micro-organisme dans un environnement chargé d'ions sulfures et finalement la persistance de son activité physiologique dans un micro environnement riche en H2S. The involvement of sulfidogenic bacteria in the corrosion of carbon steel is reviewed. After a brief description of some recent cases drawn from the petroleum industry, the physiology of the sulfidogenic bacteria which plays the most important role in the mechanism of anaerobic bacterial corrosion is examined. The involvement of H2S-producing bacteria to the biofilm formation is a prerequisite for biocorrosion. The hypothetical mechanisms described in the literature are reviewed. Regardless of the physicochemical role played by iron sulfides, which have been shown to be non-covering and to have good properties of electric conductivity, the acidification arising from cellular metabolism has been found to be an important parameter, not only in terms of

  5. Studies on the optimum conditions using acid-washed zero-valent iron/aluminum mixtures in permeable reactive barriers for the removal of different heavy metal ions from wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Han, Weijiang [School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006 (China); South China Institute of Environmental Science, MEP, Guangzhou 510655 (China); Fu, Fenglian, E-mail: fufenglian2006@163.com [School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006 (China); Cheng, Zihang; Tang, Bing; Wu, Shijiao [School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006 (China)

    2016-01-25

    Highlights: • Acid-washed zero-valent iron and zero-valent aluminum were used in PRBs. • The time that removal efficiencies of heavy metal were above 99.5% can keep 300 h. • Removal mechanism of Cr(VI), Cd{sup 2+}, Ni{sup 2+}, Cu{sup 2+}, and Zn{sup 2+} was discussed. • Heavy metal ions were removed by reduction, adsorption, and co-precipitation. - Abstract: The method of permeable reactive barriers (PRBs) is considered as one of the most practicable approaches in treating heavy metals contaminated surface and groundwater. The mixture of acid-washed zero-valent iron (ZVI) and zero-valent aluminum (ZVAl) as reactive medium in PRBs to treat heavy metal wastewater containing Cr(VI), Cd{sup 2+}, Ni{sup 2+}, Cu{sup 2+}, and Zn{sup 2+} was investigated. The performance of column filled with the mixture of acid-washed ZVI and ZVAl was much better than the column filled with ZVI or ZVAl alone. At initial pH 5.4 and flow rates of 1.0 mL/min, the time that the removal efficiencies of Cr(VI), Cd{sup 2+}, Ni{sup 2+}, Cu{sup 2+}, and Zn{sup 2+} were all above 99.5% can keep about 300 h using 80 g/40 g acid-washed ZVI/ZVAl when treating wastewater containing each heavy metal ions (Cr(VI), Cd{sup 2+}, Ni{sup 2+}, Cu{sup 2+}, and Zn{sup 2+}) concentration of 20.0 mg/L. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used to characterize ZVI/ZVAl before and after reaction and the reaction mechanism of the heavy metal ions with ZVI/ZVAl was discussed.

  6. Studies on the optimum conditions using acid-washed zero-valent iron/aluminum mixtures in permeable reactive barriers for the removal of different heavy metal ions from wastewater

    International Nuclear Information System (INIS)

    Han, Weijiang; Fu, Fenglian; Cheng, Zihang; Tang, Bing; Wu, Shijiao

    2016-01-01

    Highlights: • Acid-washed zero-valent iron and zero-valent aluminum were used in PRBs. • The time that removal efficiencies of heavy metal were above 99.5% can keep 300 h. • Removal mechanism of Cr(VI), Cd 2+ , Ni 2+ , Cu 2+ , and Zn 2+ was discussed. • Heavy metal ions were removed by reduction, adsorption, and co-precipitation. - Abstract: The method of permeable reactive barriers (PRBs) is considered as one of the most practicable approaches in treating heavy metals contaminated surface and groundwater. The mixture of acid-washed zero-valent iron (ZVI) and zero-valent aluminum (ZVAl) as reactive medium in PRBs to treat heavy metal wastewater containing Cr(VI), Cd 2+ , Ni 2+ , Cu 2+ , and Zn 2+ was investigated. The performance of column filled with the mixture of acid-washed ZVI and ZVAl was much better than the column filled with ZVI or ZVAl alone. At initial pH 5.4 and flow rates of 1.0 mL/min, the time that the removal efficiencies of Cr(VI), Cd 2+ , Ni 2+ , Cu 2+ , and Zn 2+ were all above 99.5% can keep about 300 h using 80 g/40 g acid-washed ZVI/ZVAl when treating wastewater containing each heavy metal ions (Cr(VI), Cd 2+ , Ni 2+ , Cu 2+ , and Zn 2+ ) concentration of 20.0 mg/L. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used to characterize ZVI/ZVAl before and after reaction and the reaction mechanism of the heavy metal ions with ZVI/ZVAl was discussed.

  7. Sulfonated Magnetic Nanocomposite Based on Reactive PGMA-MAn Copolymer@Fe3O4 Nanoparticles: Effective Removal of Cu(II Ions from Aqueous Solutions

    Directory of Open Access Journals (Sweden)

    Reza Hasanzadeh

    2016-01-01

    Full Text Available Chelating magnetic nanocomposites have been considered as suitable materials for removal of heavy metal ions for water treatment. In this work poly(glycidyl methacrylate-maleic anhydride copolymer (PGMA-MAn is modified with 4-aminobenzenesulfonic acid (ABSAc and subsequently the product reacted with modified Fe3O4 nanoparticles and 1,2-ethanedithiol (EDT in the presence of ultrasonic irradiation for preparation of tridimensional chelating magnetic nanocomposite. Synthesized magnetic nanocomposite was characterized by Fourier transform infrared spectroscopy (FT-IR, scanning electron microscopy (SEM, X-ray diffraction analysis (XRD, vibrating sample magnetometer (VSM, energy dispersive X-ray analysis (EDX, elemental mapping analysis (EMA, Brunauer-Emmett-Teller (BET, and thermal gravimetric analysis (TGA. The adsorption behavior of Cu(II ions was investigated by synthesized nanocomposite in various parameters such as pH, contact time, metal ion concentration, and adsorbent dosage. The equilibrium distribution coefficient (kd was determined and the findings prove that the kd value is approximately high in the case of all selected metal ions. The synthesized nanocomposite exhibited good tendency for removing Cu(II ions from aqueous solutions even at an acidic pH.

  8. 267 Isolement des bactéries lactiques à partir des produits laitiers ...

    African Journals Online (AJOL)

    sanae

    L'objectif de cette étude est donc l'isolement des bactéries lactiques à partir de lben et ... la souche Lb4 du genre Lactobacillus possède une forte propriété acidifiante. ..... En plus de l'agroalimentaire, Cette boisson pourra jouer un rôle très ...

  9. Local structure of Pb2 ion catalysts anchored within zeolite cavities and their photo-catalytic reactivity for the elimination of N2O

    International Nuclear Information System (INIS)

    Ju, Woo-Sung; Matsuoka, Masaya; Yamashita, Hiromi; Anpo, Masakazu

    2001-01-01

    The Pb 2+ /ZSM-5 catalyst was prepared by an ion-exchange method and its photo-catalytic activity for the decomposition of N 2 O under UV irradiation was investigated. In-situ UV-Vis absorption spectroscopy and XAFS (XANES and FT-EXAFS) investigations revealed that the Pb 2+ ions exist in a highly dispersed state within the pores of the zeolites. UV irradiation of the catalysts in the presence of N 2 O led to the photo-catalytic decomposition of N 2 O into N 2 at temperatures as low as 298κ. The effective wavelength of the irradiated UV light indicated that the excited state of the Pb 2+ ions included within the zeolite cavities plays a significant role in the photo-catalytic decomposition of N 2 O molecules. (au)

  10. Reactivity and selectivity of the electrophile aromatic substitution in the gas phase by positive 80Br and 125I decay ions

    International Nuclear Information System (INIS)

    Knust, E.J.

    1975-02-01

    The nuclear isomeric transition sup(80m)Br(IT) 80 Br or the electron capture decay 125 Xe(EC) 125 I in the presence of high concentrations of a noble gas such as Ar or Xe are suitable for the study of the electrophilic substitution of bromium or iodonium ions in the gas phase. By using this nuclear method, which, unlike physical methods, also allows the determination of the isomer distribution, the electrophilic aromatic bromation and iodation of mono-substituted benzene compounds through unsolvated positive bromine or iodine ions could be investigated for the first time using radio-gas chromatographic techniques. (orig./LH) [de

  11. Validation of Transfer Functions Predicting Cd and Pb Free Metal Ion Activity in Soil Solution as a Function of Soil Characteristics and Reactive Metal Content

    NARCIS (Netherlands)

    Pampura, T.; Groenenberg, J.E.; Lofts, S.; Priputina, I.

    2007-01-01

    According to recent insight, the toxicity of metals in soils is better related to the free metal ion (FMI) activity in the soil solution than to the total metal concentration in soil. However, the determination of FMI activities in soil solution is a difficult and time-consuming task. An alternative

  12. Reactive Arthritis

    Directory of Open Access Journals (Sweden)

    Eren Erken

    2013-06-01

    Full Text Available Reactive arthritis is an acute, sterile, non-suppurative and inflammatory arthropaty which has occured as a result of an infectious processes, mostly after gastrointestinal and genitourinary tract infections. Reiter syndrome is a frequent type of reactive arthritis. Both reactive arthritis and Reiter syndrome belong to the group of seronegative spondyloarthropathies, associated with HLA-B27 positivity and characterized by ongoing inflammation after an infectious episode. The classical triad of Reiter syndrome is defined as arthritis, conjuctivitis and urethritis and is seen only in one third of patients with Reiter syndrome. Recently, seronegative asymmetric arthritis and typical extraarticular involvement are thought to be adequate for the diagnosis. However, there is no established criteria for the diagnosis of reactive arthritis and the number of randomized and controlled studies about the therapy is not enough. [Archives Medical Review Journal 2013; 22(3.000: 283-299

  13. Large modification in insulator-metal transition of VO{sub 2} films grown on Al{sub 2}O{sub 3} (001) by high energy ion irradiation in biased reactive sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Azhan, Nurul Hanis; Okimura, Kunio, E-mail: okifn@keyaki.cc.u-tokai.ac.jp [Graduate School of Science and Technology, Tokai University, Hiratsuka 259-1292 (Japan); Ohtsubo, Yoshiyuki; Kimura, Shin-ichi [Graduate School of Frontier Biosciences, Osaka University, Suita 565-0871 (Japan); Zaghrioui, Mustapha; Sakai, Joe [GREMAN, UMR 7347 CNRS, Université François Rabelais de Tours, Parc de Grandmont, 37200 Tours (France)

    2016-02-07

    High energy ion irradiation in biased reactive sputtering enabled significant modification of insulator-metal transition (IMT) properties of VO{sub 2} films grown on Al{sub 2}O{sub 3} (001). Even at a high biasing voltage with mean ion energy of around 325 eV induced by the rf substrate biasing power of 40 W, VO{sub 2} film revealed low IMT temperature (T{sub IMT}) at 309 K (36 °C) together with nearly two orders magnitude of resistance change. Raman measurements from −193 °C evidenced that the monoclinic VO{sub 2} lattice begins to transform to rutile-tetragonal lattice near room temperature. Raman spectra showed the in-plane compressive stress in biased VO{sub 2} films, which results in shortening of V–V distance along a-axis of monoclinic structure, a{sub M}-axis (c{sub R}-axis) and thus lowering the T{sub IMT}. In respect to that matter, significant effects in shortening the in-plane axis were observed through transmission electron microscopy observations. V2p{sub 3/2} spectra from XPS measurements suggested that high energy ion irradiation also induced oxygen vacancies and resulted for an early transition onset and rather broader transition properties. Earlier band gap closing against the temperature in VO{sub 2} film with higher biasing power was also probed by ultraviolet photoelectron spectroscopy. Present results with significant modification of IMT behavior of films deposited at high-energy ion irradiation with T{sub IMT} near the room temperature could be a newly and effective approach to both exploring mechanisms of IMT and further applications of this material, due to the fixed deposition conditions and rather thicker VO{sub 2} films.

  14. Comparison of mass transfer coefficient approach and Nernst-Planck formulation in the reactive transport modeling of Co, Ni, and Ag removal by mixed-bed ion-exchange resins

    International Nuclear Information System (INIS)

    Bachet, Martin; Jauberty, Loic; De Windt, Laurent; Dieuleveult, Caroline de; Tevissen, Etienne

    2014-01-01

    Experiments performed under chemical and flow conditions representative of pressurized water reactors (PWR) primary fluid purification by ion exchange resins (Amberlite IRN9882) are modeled with the OPTIPUR code, considering 1D reactive transport in the mixed-bed column with convective/dispersive transport between beads and electro-diffusive transport within the boundary film around the beads. The effectiveness of the purification in these dilute conditions is highly related to film mass transfer restrictions, which are accounted for by adjustment of a common mass transfer coefficient (MTC) on the experimental initial leakage or modeling of species diffusion through the bead film by the Nernst-Planck equation. A detailed analysis of the modeling against experimental data shows that the Nernst-Planck approach with no adjustable parameters performs as well as, or better than, the MTC approach, particularly to simulate the chromatographic elution of silver by nickel and the subsequent enrichment of the solution in the former metal. (authors)

  15. Reactive Geochemical Transport Modeling of Concentrated AqueousSolutions: Supplement to TOUGHREACT User's Guide for the PitzerIon-Interaction Model

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Guoxiang; Spycher, Nicolas; Xu, Tianfu; Sonnenthal, Eric; Steefel , Carl

    2006-12-15

    In this report, we present: -- The Pitzer ion-interactiontheory and models -- Input file requirements for using the TOUGHREACTPitzer ion-interaction model and associated databases -- Run-time errormessages -- Verification test cases and application examples. For themain code structure, features, overall solution methods, description ofinput/output files for parameters other than those specific to theimplemented Pitzer model, and error messages, see the TOUGHREACT User'sGuide (Xu et al., 2005). The TOUGHREACT Pitzer version runs on aDEC-alpha architecture CPU, under OSF1 V5.1, with Compaq Digital FortranCompiler. The compiler run-time libraries are required for execution aswell as compilation. The code also runs on Intel Pentium IV andhigher-version CPU-based machines with Compaq Visual Fortran Compiler orIntel Fortran Compiler (integrated with the Microsoft DevelopmentEnvironment). The minimum hardware configuration should include 1 GB RAMand 1 GB (2 GB recommended) of available disk space.

  16. Catalytic asymmetric dihydroxylation of olefins with reusable OsO(4)(2-) on ion-exchangers: the scope and reactivity using various cooxidants.

    Science.gov (United States)

    Choudary, Boyapati M; Chowdari, Naidu S; Jyothi, Karangula; Kantam, Mannepalli L

    2002-05-15

    Exchanger-OsO(4) catalysts are prepared by an ion-exchange technique using layered double hydroxides and quaternary ammonium salts covalently bound to resin and silica as ion-exchangers. The ion-exchangers with different characteristics and opposite ion selectivities are specially chosen to produce the best heterogeneous catalyst that can operate using the various cooxidants in the asymmetric dihydroxylation reaction. LDH-OsO(4) catalysts composed of different compositions are evaluated for the asymmetric dihydroxylation of trans-stilbene. Resin-OsO(4) and SiO(2)-OsO(4) designed to overcome the problems associated with LDH-OsO(4) indeed show consistent activity and enantioselectivity in asymmetric dihydroxylation of olefins using K(3)Fe(CN)(6) and molecular oxygen as cooxidants. Compared to the Kobayashi heterogeneous systems, resin-OsO(4) is a very efficient catalyst for the dihydroxylation of a wide variety of aromatic, aliphatic, acyclic, cyclic, mono-, di-, and trisubstituted olefins to afford chiral vicinal diols with high yields and enantioselectivities irrespective of the cooxidant used. Resin-OsO(4) is recovered quantitatively by a simple filtration and reused for a number of cycles with consistent activity. The high binding ability of the heterogeneous osmium catalyst enables the use of an equimolar ratio of ligand to osmium to give excellent enantioselectives in asymmetric dihydroxylation in contrast to the homogeneous osmium system in which excess molar quantities of the expensive chiral ligand to osmium are invariably used. The complexation of the chiral ligand (DHQD)(2)PHAL, having very large dimension, a prerequisite to obtain higher ee, is possible only with the OsO(4)(2-) located on the surface of the supports.

  17. Etude microbiologique des bactéries de la fermentation malolactique

    Directory of Open Access Journals (Sweden)

    F. REIDLER

    1967-09-01

    Par la méthode biologique, une forte acidité du moût de raisins peut être diminuée par l'utilisation de la levure Schizosaccharomyces. Toutefois cette possibilité est actuellement encore au stade de l'expérimentation, elle n'est utilisée qu'à titre d'essais à l'échelle industrielle. Par contre, la fermentation malolactique est actuellement un procédé répandu et généralement connu, qui entraîne une forte diminution de i'acidité du vin. Cette fermentation malolactique est provoquée par des bactéries, plus précisément par les bactéries lactiques.

  18. Estudos do efeito anticÃrie de materiais odontolÃgicos beneficiados por nanotecnologia

    OpenAIRE

    Mary Anne Sampaio de Melo

    2012-01-01

    A aplicaÃÃo da nanotecnologia na Odontologia pode promover a otimizaÃÃo de caracterÃsticas estÃticas e mecÃnicas de materiais odontolÃgicos bem como propiciar uma aÃÃo anticÃrie pelo menor acÃmulo de biofilme oral sobre estes materiais e liberaÃÃo de compostos antimicrobianos ou remineralizantes. Os objetivos de cada capÃtulo sÃo: 1) revisar a literatura concernente ao uso de nanopartÃculas em materiais odontolÃgicos com implicaÃÃes diretas ou indiretas no controle de lesÃes de cÃrie (capÃtul...

  19. Web-séries no contexto dos Universos Narrativos Expandidos

    Directory of Open Access Journals (Sweden)

    Thiago Altafini

    2010-10-01

    Full Text Available Este artigo aborda o formato web-série por meio do conceito de narrativa transmídia, e contextualiza esse produto audiovisual no panorama da “cultura da convergência”. Como objeto de análise serão utilizadas as produções The Cell, da Fox Int ernational e Flying Kebab, produção nacional independente.

  20. Kinetic study on S_NAr reactions of 1-(Y-Substituted-phenoxy)-2,4-dinitrobenzenes with azide ion: Effect of changing nucleophile from hydroxide to zzide ion on reaction mechanism and reactivity

    International Nuclear Information System (INIS)

    Seo, Hyeon Ok; Kim, Min Young; Han, So Yeop; Um, Ik Hwan

    2015-01-01

    Second-order rate constants (k_N_3_−) for SNAr reactions of 1-(Y-substituted-phenoxy)-2,4-dinitrobenzenes (2a–2h) with math formula in 80 mol % H_2O/20 mol % DMSO at 25.0 ± 0.1 °C have been measured spectrophotometrically. The Brønsted-type plot is linear with β"l"g = −0.38. The Hammett plots correlated with math formula and math formula constants exhibit highly scattered points. In contrast, the Yukawa–Tsuno plot results in an excellent linear correlation with ρ_Y = 1.02 and r = 0.51, indicating that a negative charge develops partially on the O atom of the leaving Y-substituted-phenoxy moiety in the transition state. Accordingly, the reactions have been concluded to proceed through a stepwise mechanism, in which expulsion of the leaving group occurs in the rate-determining step. Comparison of k_N_3_− with the k_O_H_− values reported previously for the corresponding reactions with OH"− has revealed that math formula is only 6- to 26-fold less reactive than OH"− toward substrates 2a–2h, although the former is over 11 pK_a units less basic than the latter. Solvation and polarizability effects have been suggested to be responsible for the unusual reactivity shown by math formula and OH"−. Effects of changing nucleophile from OH"− to N_3"− on reaction mechanism and reactivity are discussed in detail

  1. CoSi2 growth on Si(001) by reactive deposition epitaxy: Effects of high-flux, low-energy ion irradiation

    International Nuclear Information System (INIS)

    Lim, C. W.; Greene, J. E.; Petrov, I.

    2006-01-01

    CoSi 2 layers, CoSi 2 (parallel sign)(001) Si and [100] CoSi 2 (parallel sign)[100] Si , contain fourfold symmetric (111) twinned domains oriented such that (221) CoSi 2 (parallel sign)(001) Si and CoSi 2 (parallel sign)[110] Si . We demonstrate that high-flux low-energy (E Ar + =9.6 eV) Ar + ion irradiation during deposition dramatically increases the area fraction f u of untwinned regions from 0.17 in films grown under standard magnetically balanced conditions in which the ratio J Ar + /J Co of the incident Ar + to Co fluxes is 1.4 to 0.72 with J Ar + /J Co =13.3. TEM analyses show that the early stages of RDE CoSi 2 (001) film growth proceed via the Volmer-Weber mode with independent nucleation of both untwinned and twinned islands. Increasing J Ar + /J Co results in larger values of both the number density and area of untwinned with respect to twinned islands. The intense Ar + ion bombardment creates additional low-energy adsorption sites that favor the nucleation of untwinned islands while collisionally enhancing Co surface mobilities which, in turn, increases the probability of itinerant Co adatoms reaching these sites

  2. Kinetic study on alkaline hydrolysis of Y-substituted phenyl X-substituted benzenesulfonates: Effects of changing nucleophile from azide to hydroxide ion on reactivity and transition-state structure

    International Nuclear Information System (INIS)

    Moon, Ji Hyun; Kim, Min Young; Han, So Yeop; Um, Ik Hwan

    2015-01-01

    Second-order rate constants (math formula) for alkaline hydrolysis of 2,4-dinitrophenyl X-substituted benzenesulfonates (1a–1f) and Y-substituted phenyl 4-nitrobezenesulfonates (2a–2g) have been measured spectrophotometrically. Comparison of math formula with the math formula values reported previously for the corresponding reactions with math formula has revealed that OH [BOND] is only 10"3-fold more reactive than math formula, although the former is 11 pK _a units more basic than the latter. The Yukawa–Tsuno plot for the reactions of 1a–1f results in an excellent linear correlation with ρ_X = 2.09 and r = 0.41. The Brønsted-type plot for the reactions of 2a–2g is linear with β_l_g = −0.51, which is typical for reactions reported to proceed through a concerted mechanism. The Yukawa–Tsuno plot for the reactions of 2a–2g exhibits excellent linearity with ρ_Y = 1.85 and r = 0.25, indicating that a partial negative charge develops on the O atom of the leaving group in the transition state. Thus, the alkaline hydrolysis of 1a–1f and 2a–2g has been concluded to proceed through a concerted mechanism. Comparison of the ρ_X and β_l_g values for the reactions with math formula ions suggests that the reactions with hydroxide ion proceed through a tighter transition-state structure than those with azide ion

  3. House of Cards: dna Shakesperiano na trilogia e nas séries

    Directory of Open Access Journals (Sweden)

    Brunilda T. Reichmann

    2017-12-01

    Full Text Available Este artigo faz uma leitura de produções literárias e televisivas contemporâneas, da trilogia política House of Cards, To Play the King e The Final Cut, do escritor inglês Michael Dobbs; da série da BBC: The House of Cards Trilogy, adaptação desses romances; bem como da maxissérie da Netflix, House of Cards, baseada nas anteriores. Detém-se em alguns elementos literários dessas produções e os relaciona com peças do dramaturgo inglês William Shakespeare, mais especificamente, a Macbeth, a Otelo, o Mouro de Veneza e a Ricardo III. Tentamos demonstrar como romancistas, roteiristas e diretores de séries celebram a inigualável arte de Shakespeare ao retrabalhar temas, atualizar contextos e reconstruir traços de personalidade de seus personagens inesquecíveis. Em suma, este texto visa resgatar algumas características genéticas das peças de Shakespeare presentes na produção artística/midiática contemporânea.

  4. Gestação e cárie dental Pregnancy and dental caries

    Directory of Open Access Journals (Sweden)

    Yvette Viegas

    1970-06-01

    Full Text Available O objetivo desta pesquisa foi o de verificar se a incidência de cárie aumenta durante a gestação. Foram incluídas neste estudo 82 gestantes e 40 não gestantes nas quais se observou a incidência de superfícies atacadas pela cárie durante um período de 6 meses. À análise dos dados constatamos que não ocorreu diferença estatìsticamente significante entre os dois grupos quanto à incidência de cárie.The purpose of this investigation was to verify if the incidence of dental decay increases during pregnancy.In this study 82 pregnant and 40 nonpregnant women were included. In both groups the incidence of attacked surfaces was studied in a period of six months. The observed incidence of dental caries between the groups was not statistically significant.

  5. Substances bioactives élaborées par des cyanobactéries isolées de ...

    African Journals Online (AJOL)

    Les substances extracellulaires produites par les cyanobactéries étudiées ont aussi une activité antibactérienne vis-à-vis de M. luteus, Bacillus subtilis, Serratia marcescens, B. cereus, Escherichia coli 0128B12 et Staphylococcus aureus. Le biotest souris a permis de montrer que certaines cyanobactéries étudiées ...

  6. Étude de l'antagonisme entre les levures et les bactéries lactiques du vin

    Directory of Open Access Journals (Sweden)

    Anne-Marie BOIDRON

    1969-12-01

    En introduisant des bactéries cultivées dans le vin, on provoque parfois la fermentation malolactique mais pas toujours. En ensemençant le moût par ces bactéries on peut obtenir un développement tel qu'il gêne les levures et le déroulement de la fermentation alcoolique.

  7. Desempenho motor em séries múltiplas até a falha concêntrica

    Directory of Open Access Journals (Sweden)

    Erick Henrique Pereira Eches

    2013-09-01

    Full Text Available O objetivo deste estudo foi analisar o número de repetições sustentadas até a falha concêntrica, em séries múltiplas de exercícios com pesos. Três séries a 70% de 1-RM foram executadas por 17 homens (28,0 ± 5,1 anos, nos exercícios supino em banco horizontal, agachamento, rosca direta, cadeira extensora e mesa flexora, com dois minutos de recuperação entre as séries e cinco minutos entre os exercícios. Um maior número total de repetições (p < 0,05 foi identificado nos exercícios multiarticulares (33 repetições em relação aos exercícios monoarticulares (24 a 28 repetições. Uma redução significante no desempenho (p < 0,05 foi encontrada entre a primeira e a segunda série (28 a 35% e entre a segunda e a terceira série (22 a 36%. Os resultados sugerem que o desempenho motor não é sustentado em séries múltiplas a 70% de 1-RM em exercícios monoarticulares e multiarticulares, com intervalos de recuperação de dois minutos.

  8. Reactive Systems

    DEFF Research Database (Denmark)

    Aceto, Luca; Ingolfsdottir, Anna; Larsen, Kim Guldstrand

    A reactive system comprises networks of computing components, achieving their goals through interaction among themselves and their environment. Thus even relatively small systems may exhibit unexpectedly complex behaviours. As moreover reactive systems are often used in safety critical systems......, the need for mathematically based formal methodology is increasingly important. There are many books that look at particular methodologies for such systems. This book offers a more balanced introduction for graduate students and describes the various approaches, their strengths and weaknesses, and when...... they are best used. Milner's CCS and its operational semantics are introduced, together with the notions of behavioural equivalences based on bisimulation techniques and with recursive extensions of Hennessy-Milner logic. In the second part of the book, the presented theories are extended to take timing issues...

  9. Structure and reactivity of C7H7+ ions from the decay of tritiated toluenes. Part 1. Reactions of free tolyl ions with methanol in the gas and liquid phases

    International Nuclear Information System (INIS)

    Cacace, F.; Ciranni, G.; Sparapani, C.; Speranza, M.

    1984-01-01

    Labeled tolyl cations from the decay of ring-multitritiated toluene have been allowed to react with methanol in the liquid and the gas phases, at pressures ranging from 6 to 100 torr, yielding methyl tolyl ethers as the major products, without appreciable formation of benzyl methyl ether. The isomeric composition of the products from the gaseous systems depends on the pressure, the percentage of o-tolyl ether increasing at the expense of the para isomer as the methanol pressure is reduced. The results show that the three tolyl ions exist as distinct species in the dilute gas state. When formed in a sufficiently excited state, as from the β decay of a 3 H atom in toluene, they undergo appreciable interconversion, without detectable isomerization to the benzyl cation, at least within the pressure range accessible to the decay technique. 50 references, 1 table

  10. Sobre o uso das séries de Puiseux em mecanica celeste

    Science.gov (United States)

    Miloni, O. I.

    2003-08-01

    Neste trabalho é apresentada uma demonstração do uso dos diferentes desenvolvimentos em séries para as equações de perturbação em Mecânica Celeste no marco Hamiltoniano. Em trabalhos clássicos como os de Poincaré (Poincaré, 1893) por exemplo, já esta planteado o uso de potências não inteiras no pequeno parâmetro, o que evidencia a não analiticidade das funções quando uma ressonância ocorre. Nestes trabalhos os desenvolvimentos são na raíz quadrada da massa de Júpiter (o pequeno parâmetro). Mais recentemente (Ferraz-Mello, 1985) outros tipos de desenvolvimentos foram aplicados modificando substancialmente as ordens de grandeza e a velocidade de convergência das séries. Com esta abordagem, os desenvolvimentos foram expressados em termos da raíz cúbica do pequeno parâmetro. Neste trabalho apresentamos um enfoque geral, onde os diferentes tipos de desenvolvimentos em séries de Puiseux (Valiron, 1950) são obtidos a partir da aplicação de Teorema de Preparação de Weierstrass (Goursat, 1916) considerando a equação de Hamilton-Jacobi como uma equação algébrica. Os resultados são aplicados ao problema restrito dos três corpos em ressonância de primeira ordem e, dependendo da grandeza da excentricidade do asteróide em relação à de Júpiter, obtemos os diferentes desenvolvimentos, em raíz quadrada ou raíz cúbica da massa de Júpiter.

  11. Memòries del santuari del Mont (final s. XVIII-1953)

    OpenAIRE

    Gifre i Ribas, Pere; Puig Pla, Santi; Tremoleda Trilla, Joaquim

    2011-01-01

    Transcripció del text inèdit de memòries del santuari del Mont. El text va ser escrit, bàsicament, pels preveres custodis i administradors del santuari. Es recull, primerament, els costums litúrgics de la parròquia de Sous, a la manera de les consuetes. A partir de 1791 s’anoten els fets més importants, a parer del custodi administrador, ocorreguts al santuari: obres de reforma i restauració del santuari i les seves dependències, adquisicions de mobiliari i parament de la casa, donacions al s...

  12. Déterminisme de la prolifération des cyanobactéries toxiques en ...

    African Journals Online (AJOL)

    filtrée avec un filet à plancton de 20 µm de maille. Le culot retenu a été transvasé dans un tube de Falcon et a été fixé au lugol à 1% v/v ou au formladéhyde à 5% pour l'identification morphologique des cyanobactéries. Des échantillons de 50 mL ont été prélevés et fixés comme indiqué ci-dessus dans des bouteilles ...

  13. Cultura das séries: forma, contexto e consumo de ficção seriada na contemporaneidade

    Directory of Open Access Journals (Sweden)

    Marcel Vieira Barreto Silva

    2014-06-01

    Full Text Available Nos últimos anos, tem aumentado o interesse acadêmico em torno das séries de televisão, especialmente - mas não somente -, as de origem norte-americana. Há toda uma literatura recente que avalia a presença das séries de TV em diversas matrizes nacionais (EUA, Itália, França, Reino Unido, etc., analisando a produção, circulação e recepção dos programas. Neste artigo, vamos propor a existência de uma cultura das séries, a partir de três condições centrais: a sofisticação das formas narrativas, o contexto tecnológico que permite uma ampla circulação digital (on-line ou não e os novos modos de consumo, participação e crítica textual. Com isso, as séries fomentam interesses que não se restringem ao envolvimento de comunidades de fãs com obras específicas, mas também indicam a formação de um repertório histórico em torno desses programas, de uma telefilia transnacional, de uma cultura das séries.

  14. La politique viti-vinicole de l'Algérie

    Directory of Open Access Journals (Sweden)

    A. REYNIER

    1974-09-01

    Full Text Available La vigne et le vin, héritage de la colonisation, occupent une place importante dans l'économie nationale de l'Algérie, faisant vivre plus de 2.000.000 personnes (entre les travaux de la vigne et la commercialisation du vin. L'implantation du vignoble algérien qui s'est effectuée dans un cadre national franco-algérien afin de pallier aux insuffisances quantitatives d'abord, qualitatives ensuite du vignoble métropolitain, n'était pas justifiée par l'existence de besoins locaux. L'accession de l'Algérie à l'indépendance a brisé cet espace économique franco-algérien ; le vin algérien n'a plus été un produit du marché national français mais est devenu une marchandise relevant d'échanges internationaux. Bien que les accords bilatéraux aient permis pendant un certain temps de continuer les exportations vers la France, celles-ci pour des raisons économiques et politiques ont été freinées.

  15. Prévalence des souches d'entérobactéries productrices de bêta ...

    African Journals Online (AJOL)

    La dissémination des bactéries multi-résistantes aux antibiotiques contribue à la morbidité et la mortalité dues aux maladies infectieuses. Le but de cette étude était de déterminer la prévalence des souches d'entérobactéries productrices de bêta-lactamases à spectre élargi (EBLSE) et d'évaluer leur sensibilité aux ...

  16. Sub-0.1 mu m line fabrication by Focused ion beam and columnar structural Se-Ge resist

    CERN Document Server

    Lee, H Y; Chung, H B

    1998-01-01

    As a method to enhance the sensitivity (S) of an inorganic resist for focused-ion-beam (FIB), lithography, sub-0.1 mu m patterning properties of a columnar structural alpha-Se sub 7 sub 5 Ge sub 2 sub 5 resist have been investigated using 30 keV low-energy Ga sup + -FIB exposure and CF sub 4 reactive-ion etching (RIE). development. The Se sub 7 sub 5 Ge sub 2 sub 5 thin films were 60 .deg. and 80 .deg. -obliquely deposited on Si substrate and parts of the films were annealed for several minutes at the glass transition temperature (T sub g =approx 220 .deg. C). Columnar structures with the angles of approximately 40 .deg. and 65 .deg. are observed in 60 .deg. and 80 .deg. -obliquely deposited films, respectively, and they disappear after annealing. Despite the disappearance of the columnar structures, a critical decrease in thickness is not observed. For the FIB exposures with a beam diameter of approx 0.1 mu m and around the threshold dose, the negative-type fine patterns with linewidth of about 0.06 approx 0...

  17. Plasma texturing on large-area industrial grade CZ silicon solar cells

    DEFF Research Database (Denmark)

    Davidsen, Rasmus Schmidt; Nordseth, Ørnulf; Schmidt, Michael Stenbæk

    2013-01-01

    We report on an experimental study of nanostructuring of silicon solar cells using reactive ion etching (RIE). A simple mask-less, scalable RIE nanostructuring of the solar cell surface is shown to reduce the AM1.5-weighted average reflectance to a level below 1 % in a fully optimized RIE texturi...

  18. L'éducation physique et sportive scolaire en Algérie

    OpenAIRE

    Yahiaoui, Boubeker

    2016-01-01

    Le problème qui se pose à nous dans cet essai d'analyse est que l'Education Physique et Sportive (par abréviation EPS) reste toujours marginalisée à l'école algérienne. Alors que les activités physiques sont considérées dans le monde comme un moyen fondamental d'amélioration de la santé et de l'éducation, plus particulièrement des jeunes, en Algérie, l'EPS et le sport scolaire ont régressé : 2x45mn hebdomadaires d'enseignement très peu assurées à l'école primaire, 2h par semaine dans les ense...

  19. Impact du marketing bancaire sur les petites et moyennes entreprises en Algérie

    OpenAIRE

    Boutarene, Nezha-yamina

    2014-01-01

    La premiére partie intitulée le marketing dans les institutions financérs bancaires,le premier chapitre présente l'importance du marketing dans la banque , ensuite le deuxiéme chapitre explique le comportement du consommateur (PME) ,et les paramétres d'analyse du banquier.Le troisiéme chapitre est consacré à la politique et le plan marketing bancaire.La deuxiéme partie présente l'historique du systéme bancaire Algérien et la possibilité d'introduction d'un marketing bancaire en Algérie....

  20. Report for MaRIE Drivers Workshop on needs for energetic material's studies.

    Energy Technology Data Exchange (ETDEWEB)

    Specht, Paul Elliott [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2018-01-01

    Energetic materials (i.e. explosives, propellants, and pyrotechnics) have complex mesoscale features that influence their dynamic response. Direct measurement of the complex mechanical, thermal, and chemical response of energetic materials is critical for improving computational models and enabling predictive capabilities. Many of the physical phenomena of interest in energetic materials cover time and length scales spanning several orders of magnitude. Examples include chemical interactions in the reaction zone, the distribution and evolution of temperature fields, mesoscale deformation in heterogeneous systems, and phase transitions. This is particularly true for spontaneous phenomena, like thermal cook-off. The ability for MaRIE to capture multiple length scales and stochastic phenomena can significantly advance our understanding of energetic materials and yield more realistic, predictive models.

  1. 7th International Conference on Robotics in Education (RiE)

    CERN Document Server

    Lepuschitz, Wilfried; Koppensteiner, Gottfried; Balogh, Richard

    2017-01-01

    This proceedings volume showcases the latest achievements in research and development in Educational Robotics presented at the 7th International Conference on Robotics in Education (RiE) held in Vienna, Austria, during April 14-15, 2016. The book offers a range of methodologies for teaching robotics and presents various educational robotics curricula. It includes dedicated chapters for the design and analysis of learning environments as well as evaluation means for measuring the impact of robotics on the students’ learning success. Moreover, the book presents interesting programming approaches as well as new applications, the latest tools, systems and components for using robotics. The presented applications cover the whole educative range, from elementary school to high school, college, university and beyond, for continuing education and possibly outreach and workforce development. The book provides a framework involving two complementary kinds of contributions: on the one hand on technical aspects and on ...

  2. The fate of moderately volatile elements in impact events—Lithium connection between the Ries sediments and central European tektites

    Czech Academy of Sciences Publication Activity Database

    Rodovská, Z.; Magna, T.; Žák, Karel; Skála, Roman; Brachaniec, T.; Visscher, Ch.

    2016-01-01

    Roč. 51, č. 12 (2016), s. 2403-2415 ISSN 1086-9379 R&D Projects: GA ČR GA13-22351S Institutional support: RVO:67985831 Keywords : tektites * Ries sediments * Li Subject RIV: DB - Geology ; Mineralogy Impact factor: 2.391, year: 2016

  3. The reactivity meter and core reactivity

    International Nuclear Information System (INIS)

    Siltanen, P.

    1999-01-01

    This paper discussed in depth the point kinetic equations and the characteristics of the point kinetic reactivity meter, particularly for large negative reactivities. From a given input signal representing the neutron flux seen by a detector, the meter computes a value of reactivity in dollars (ρ/β), based on inverse point kinetics. The prompt jump point of view is emphasised. (Author)

  4. A visibilidade política na série The Crown

    Directory of Open Access Journals (Sweden)

    Giovana dos Passos Colling

    2018-02-01

    Full Text Available O presente trabalho tem por objetivo compreender como se configura a visibilidade política na trama da série The Crown, produzida pela Netflix, por meio da análise dos três primeiros episódios. A partir do enredo da série, que conta a história da família real britânica na época em que a Raínha Elizabeth II assume o trono e suas novas responsabilidades políticas, é possível perceber e analisar as relações de poder entre a política, a sociedade e a mídia, além de temáticas como imagem pública, escândalo político, relações políticas entre países e discurso midiático. A análise de conteúdo se dá a partir dos autores Gomes, Thompson e Weber. Assim, torna-se perceptível a indissociabilidade entre a mídia, a sociedade e a política para a manutenção de um governo estável, que se utilizando da visibilidade midiática de maneira favorável, estabelece uma comunicação eficiente e uma imagem pública forte e positiva.

  5. Aquisição de Estreptococos Mutans e Desenvolvimento de Cárie Dental em Primogênitos

    Science.gov (United States)

    NOCE, Erica; RUBIRA, Cassia Maria Fischer; da Silva ROSA, Odila Pereira; da SILVA, Salete Moura Bonifácio; BRETZ, Walter Antonio

    2011-01-01

    Objetivo Avaliar o momento de aquisição de estreptococos mutans (EM), desenvolvimento de cárie dental e as variáveis a eles associadas no decorrer de 23 meses, em primogênitos de famílias de baixo nível socioeconômico, desde os sete meses de idade. Método A amostra foi selecionada com base em mães densamente colonizadas por EM, incluindo todos os membros de 14 famílias que conviviam na mesma casa. Foram envolvidos no estudo 14 mães, pais e primogênitos e 8 parentes, na maioria avós. Exames clínicos e radiográficos iniciais determinaram os índices de cárie e condição periodontal dos adultos. Contagens de EM foram feitas em todos os adultos nas duas primeiras visitas. Nas crianças foram avaliados os níveis de EM, o número de dentes e de cáries, em quatro visitas. Resultados A prevalência de EM nos adultos foi alta, estando ausente em apenas um dos pais. EM foram detectados em 1, 2, 3 e 10 crianças, respectivamente nas visitas #1, 2, 3 e 4. A cárie dental foi detectada em apenas três crianças na última visita (aos 30 meses de idade), as quais apresentaram escores de EM significantemente maiores que as crianças sem cárie, na mesma visita. Conclusão Exclusivamente a condição social de baixa renda e mães densamente colonizadas por EM não são sinônimo de colonização precoce e alta atividade de cárie em crianças cuidadas em casa. O desenvolvimento de cárie está significantemente associado a escores elevados de EM nas crianças. PMID:22022218

  6. rie dentária: um novo conceito Dental caries: a new concept

    Directory of Open Access Journals (Sweden)

    José Eduardo de Oliveira Lima

    2007-12-01

    Full Text Available INTRODUÇÃO: a maneira como a cárie dentária é conceituada e seus fatores etiológicos considerados têm gerado divergências, na elaboração de estratégias preventivas, entre epidemiologistas e profissionais da saúde. As considerações e o conhecimento sobre a formação, progressão e definição da lesão de cárie devem ser aprofundados, para se estabelecer critérios que favoreçam o diagnóstico, a prevenção e o tratamento, preservando a qualidade de vida do paciente. O conceito de cárie dentária como doença infecciosa, transmissível e dieta dependente deve ser revisto, e os fatores etiológicos melhor interpretados e entendidos, para evitar estratégias de prevenção e tratamento equivocadas. É necessário um posicionamento mais conclusivo de instituições científicas e universidades, objetivando o estabelecimento definitivo desses conceitos, para que possam refletir-se em resultados práticos. OBJETIVO: o objetivo deste trabalho foi trazer uma contribuição baseada em 35 anos de exercício profissional e da vivência acadêmica no ensino e pesquisa e, também, realizar uma revisão da literatura de Cariologia, com a intenção de levar a uma interpretação dos achados científicos que permita um raciocínio lógico sobre o conceito de cárie dentária e dos fatores envolvidos em sua etiologia, podendo, com isso, chegar o mais próximo possível da verdade. RESULTADOS E CONCLUSÕES: os conhecimentos adquiridos até hoje, por meio da pesquisa científica e também a partir das conclusões deste trabalho, permitem elaborar estratégias preventivas mais eficientes em todo o planeta e a cárie dentária passará a ser, dentro de pouco tempo, um problema irrelevante ao ser humano. A partir do raciocínio desenvolvido neste trabalho, pode-se concluir que a cárie dentária não deve ser considerada uma doença, mas simplesmente uma lesão do esmalte de causa local, sem fatores etiológicos determinantes, porém provocada

  7. Role of reactive species in the photocatalytic degradation of ...

    Indian Academy of Sciences (India)

    2017-12-06

    Dec 6, 2017 ... Nitrogen doping; photocatalysis; visible light active; reactive species; ... Of a variety of semiconductors, tungsten oxide (WO3) ... sodium chloride (NaCl, Chameleon reagent), sodium nitrate ..... Ammonium. No ion .... produced.

  8. Cooperative simulation of lithography and topography for three-dimensional high-aspect-ratio etching

    Science.gov (United States)

    Ichikawa, Takashi; Yagisawa, Takashi; Furukawa, Shinichi; Taguchi, Takafumi; Nojima, Shigeki; Murakami, Sadatoshi; Tamaoki, Naoki

    2018-06-01

    A topography simulation of high-aspect-ratio etching considering transports of ions and neutrals is performed, and the mechanism of reactive ion etching (RIE) residues in three-dimensional corner patterns is revealed. Limited ion flux and CF2 diffusion from the wide space of the corner is found to have an effect on the RIE residues. Cooperative simulation of lithography and topography is used to solve the RIE residue problem.

  9. Reactivity of halide and pseudohalide ligands

    International Nuclear Information System (INIS)

    Kukushkin, Yu.N.

    1987-01-01

    Reactivity of halide and pseudohalide (cyanide, azide, thiocyanate, cyanate) ligands tending to form bridge bonds in transition metal (Re, Mo, W) complexes is considered. Complexes where transition metal salts are ligands of other, complex-forming ion, are described. Transformation of innerspheric pseudohalide ligands is an important way of directed synthesis of these metal coordination compounds

  10. Mineral-produced high-pressure striae and clay polish: Key evidence for nonballistic transport of ejecta from Ries crater

    Science.gov (United States)

    Chao, E.C.T.

    1976-01-01

    Recently discovered mineral-produced, deeply incised striae and mirror-like polish on broken surfaces of limestone fragments from the sedimentary ejecta of the Ries impact crater of southern Germany are described. The striae and polish were produced under high confining pressures during high-velocity nonballistic transport of the ejecta mass within the time span of the cratering event (measured in terms of seconds). The striae on these fragments were produced by scouring by small mineral grains embedded in the surrounding clay matrix, and the polish was formed under the same condition, by movements of relatively fragment-free clay against the fragment surfaces. The occurrence of these striae and polish is key evidence for estimating the distribution and determining the relative importance of nonballistic and ballistic transport of ejecta from the shallow Ries stony meteorite impact crater.

  11. Les séries et la guerre (pistes de lectures et de réflexion)

    OpenAIRE

    Boutet, Marjolaine

    2016-01-01

    Guerre, mémoire, identité Avec les séries policières, les séries historiques sont le genre le plus populaire sur les télévisions du monde entier. Parce que la télévision s’est construite d’abord comme un média national et, particulièrement en Occident, comme un média de reconstruction nationale après la Seconde Guerre mondiale, elle fut aussi, plus ou moins consciemment, un vecteur important du « récit national ». Au sein de ces récits, les guerres occupent une place particulière, puisque, co...

  12. Analysis of the LSC microbunching instability in MaRIE linac reference design

    International Nuclear Information System (INIS)

    Yampolsky, Nikolai

    2016-01-01

    In this report we estimate the effect of the microbunching instability in the MaRIE XFEL linac. The reference design for the linac is described in a separate report. The parameters of the L1, L2, and L3 linacs as well as BC1 and BC2 bunch compressors were the same as in the referenced report. The beam dynamics was assumed to be linear along the accelerator (which is a reasonable assumption for estimating the effect of the microbunching instability). The parameters of the bunch also match the parameters described in the referenced report. Additionally, it was assumed that the beam radius is equal to R = 100 m and does not change along linac. This assumption needs to be revisited at later studies. The beam dynamics during acceleration was accounted in the matrix formalism using a Matlab code. The input parameters for the linacs are: RF peak gradient, RF frequency, RF phase, linac length, and initial beam energy. The energy gain and the imposed chirp are calculated based on the RF parameters self-consistently. The bunch compressors are accounted in the matrix formalism as well. Each chicane is characterized by the beam energy and the R56 matrix element. It was confirmed that the linac and beam parameters described previously provide two-stage bunch compression with compression ratios of 10 and 20 resulting in the bunch of 3kA peak current.

  13. Suitability of N2 plasma for the RIE etching of thin Ag layers

    International Nuclear Information System (INIS)

    Hrkut, P.; Matay, L.; Kostic, I.; Bencurova, A.; Konecnikova, A.; Nemec, P.; Andok, R.; Hacsik, S.

    2013-01-01

    Silver layers of 48 nm thickness were evaporated using EB PVD on Si wafers. The masking resist layers were spin-coated and patterned by the EBDW lithography on the ZBA 21 (20 keV) (Carl-Zeiss, Jena; currently Vistec, Ltd.) variable shaped e-beam pattern generator in II SAS. In order to check the etching process in N 2 , we covered a part of the samples containing Ag with a layer of various resists. The samples were dried on a hot-plate and RIE etched in SCM 600 (1 Pa; 20 sccm; 500 W). After 8 minutes the non-masked Ag layer was completely etched away, what testified suitability of N 2 as an etching gas. Also the etch time of 4 minutes showed to be sufficient for etching through the Ag layer. In order to optimize the etching process it was necessary to estimate the etch-rate (E.R.) of suitable resist layers and of the silver layer. The (authors)

  14. The behavior of osmium and other siderophile elements during impacts: Insights from the Ries impact structure and central European tektites

    Czech Academy of Sciences Publication Activity Database

    Ackerman, Lukáš; Magna, T.; Žák, Karel; Skála, Roman; Jonášová, Šárka; Mizera, Jiří; Řanda, Zdeněk

    2017-01-01

    Roč. 210, 1 August (2017), s. 59-70 ISSN 0016-7037 R&D Projects: GA ČR GA13-22351S; GA MŠk LM2015056 Institutional support: RVO:67985831 ; RVO:61389005 Keywords : highly siderophile elements * meteoritic component * Osmium isotopes * Ries impact structure * tektite Subject RIV: DB - Geology ; Mineralogy; CB - Analytical Chemistry, Separation (UJF-V) OBOR OECD: Geology; Analytical chemistry (UJF-V) Impact factor: 4.609, year: 2016

  15. Les bactéries sporulées dans les conserves de légumes (petits pois ...

    African Journals Online (AJOL)

    Unicornis

    brevis (4.53%). Mots clés : Conserves végétales - Petits pois- Bactéries sporulées - Identification biochimique. Abstract. For a consumer more and more aware about the risks for his health, regarding the food he buys, the aim of this study is to verify the hygienic quality of ten batches, each one contains five green peas cans, ...

  16. Framework for reactive mass transport

    DEFF Research Database (Denmark)

    Jensen, Mads Mønster; Johannesson, Björn; Geiker, Mette Rica

    2014-01-01

    Reactive transport modeling is applicable for a range of porous materials. Here the modeling framework is focused on cement-based materials, where ion diffusion and migration are described by the Poisson-Nernst-Planck equation system. A two phase vapor/liquid flow model, with a sorption hysteresis...... description is coupled to the system. The mass transport is solved by using the finite element method where the chemical equilibrium is solved explicitly by an operator splitting method. The IPHREEQC library is used as chemical equilibrium solver. The equation system, solved by IPHREEQC, is explained...

  17. As séries televisivas no contexto da ficção nacional: uma aproximação

    Directory of Open Access Journals (Sweden)

    Sílvia Góis Dantas

    2016-02-01

    Full Text Available Esse texto procura apresentar uma aproximação com o universo de estudo das narrativas teleficcionais, a partir de uma ampla revisão teórica que compreende obras de Balogh, Bruner, Eco, Machado, Mungioli. Para isso, nosso percurso inicia com os estudos sobre narrativa e ficção, transitamos pelo conceito e classificação de serialidade, no qual buscamos distinguir série e seriado. Em seguida, avançamos para as pesquisas sobre a cultura das séries na contemporaneidade e trazemos informações sobre as séries brasileiras inéditas exibidas em 2013 na TV aberta e na TV paga, e focamos na série 3 Teresas, objeto de nossa pesquisa em fase inicial.

  18. ries precoç de la infància: de la prevalença a la prevenció

    OpenAIRE

    Verdegal Burdeus, Anna

    2016-01-01

    La malaltia de càries dental és considerada per l’Organització Mundial de la Salut (OMS) un problema de salut pública per la seua gran prevalença. Hi ha relació entre les malalties bucodentals i altres malalties cròniques freqüents i baix pes en nounats. Segons l’OMS, la incidència de càries en la població infantil a escala mundial oscil·la entre el 60% i el 90%. La càries precoç de la infancia (CPI) es defineix com la presència d’una o més dents amb càries, perdudes o obturades en pacients ...

  19. Reactive Kripke semantics

    CERN Document Server

    Gabbay, Dov M

    2013-01-01

    This text offers an extension to the traditional Kripke semantics for non-classical logics by adding the notion of reactivity. Reactive Kripke models change their accessibility relation as we progress in the evaluation process of formulas in the model. This feature makes the reactive Kripke semantics strictly stronger and more applicable than the traditional one. Here we investigate the properties and axiomatisations of this new and most effective semantics, and we offer a wide landscape of applications of the idea of reactivity. Applied topics include reactive automata, reactive grammars, rea

  20. Gas-Phase Reactivity of Microsolvated Anions

    DEFF Research Database (Denmark)

    Thomsen, Ditte Linde

    the gas-phase α-effect. The experimental studies are performed by means of the flowing after glow selected ion flow tube technique, and these are supplemented by electronic structure calculations. The α-nucleophile employed is the microsolvated hydrogen peroxide anion whose reactivity is compared......Gas-phase studies of ion-molecule reactions shed light on the intrinsic factors that govern reactivity; and even solvent effects can be examined in the gasphase environment by employing microsolvated ions. An area that has received considerable attention with regard to the interplay between...... to that of a series of microsolvated oxygen centered anions. The association of the nucleophiles with a single water or methanol molecule allows the α-effect to be observed in the SN2 reaction with methyl chloride; this effect was not apparent in the reactions of the unsolvated anions. The results suggest...

  1. Reactive perforating collagenosis

    Directory of Open Access Journals (Sweden)

    Yadav Mukesh

    2009-01-01

    Full Text Available Reactive perforating collagenosis is a rare cutaneous disorder of unknown etiology. We hereby describe a case of acquired reactive perforating collagenosis in a patient of diabetes and chronic renal failure.

  2. Reactivity on the Web

    OpenAIRE

    Bailey, James; Bry, François; Eckert, Michael; Patrânjan, Paula Lavinia

    2005-01-01

    Reactivity, the ability to detect simple and composite events and respond in a timely manner, is an essential requirement in many present-day information systems. With the emergence of new, dynamic Web applications, reactivity on the Web is receiving increasing attention. Reactive Web-based systems need to detect and react not only to simple events but also to complex, real-life situations. This paper introduces XChange, a language for programming reactive behaviour on the Web,...

  3. Monadic Functional Reactive Programming

    NARCIS (Netherlands)

    A.J. van der Ploeg (Atze); C Shan

    2013-01-01

    htmlabstractFunctional Reactive Programming (FRP) is a way to program reactive systems in functional style, eliminating many of the problems that arise from imperative techniques. In this paper, we present an alternative FRP formulation that is based on the notion of a reactive computation: a

  4. Epilepsia temporal estudo psiquiátrico evolutivo de uma série tratada cirurgicamente

    Directory of Open Access Journals (Sweden)

    Cláudio Rossi

    1988-03-01

    Full Text Available Os autores estudaram do ponto de vista psiquiátrico, no pré e no pós-operatório, série de 31 casos operados por epilepsia temporal incontrolável. Esta, com seu substrato fisiopatológico, está associada a irritabilidade patológica, tenacidade afetiva, impulsividade, disfunção cognitiva epiléptica e deficiências de abstração nos processos intelectuais. As altas incidências dessas psicopatologias nos doentes estudados demonstram essa associação e sugerem fortemente a existência de relação causal entre elas e a epilepsia temporal. As lobectomias temporais unilaterais se mostraram eficazes para o controle das crises epilépticas, cuja freqüência se reduziu intensamente no pós-operatório. As cirurgias promoveram intensa e útil redução nas manifestações da irritabilidade patológica, da impulsividade, da disfunção cognitiva epiléptica e das instabilidades da capacidade de abstração promovidas por impactos afetivos. A tenacidade afetiva foi pouco alterada pelas operações, embora tenha ocorrido efeito favorável. Incapacidades de abstração, estáveis, não foram afetadas pelas cirurgias. A presença de focos em ambos os lobos temporais não diminuiu a eficácia da cirurgia, nem quanto a seu efeito sobre as crises, nem quanto a seu efeito sobre as alterações psicopatológicas estudadas.

  5. Dialogismo e Intertextualidade das diferenças presentes na série televisiva Aline

    Directory of Open Access Journals (Sweden)

    Valquiria Botega de Lima

    2011-07-01

    Full Text Available Resumo: Este artigo tematiza os modos como se manifestam, pelo funcionamento intertextual, o dialogismo e as relações intertextuais no nível das diferenças (paródia no episódio Aline TPM. Trata-se da série televisiva Aline, nossa materialidade de estudo, exibida por uma emissora de TV aberta brasileira. Considerando o texto como um objeto constitutivamente dialógico e heterogêneo, buscamos analisar como esse episódio dialoga com outros textos e mostrar como são construídas as relações intertextuais parodísticas. Em nosso embasamento teórico partimos de uma reflexão sobre o conceito de dialogismo bakhtiniano (1999, posteriormente abordamos o conceito de intertextualidade, no que tange as colocações advindas, sobretudo, de Koch (1997 e nas considerações acerca da intertextualidade das diferenças nos respaldamos, principalmente, no teórico Sant’Anna (2007. Em termos metodológicos, descrevemos, separadamente, cada cena recortada cuja análise nos permitiu constatar que em relação a TPM há, significando, de um lado o ponto de vista clínico e de outro o ponto de vista humorístico, os quais, vale ressaltar, nunca terão a mesma orientação argumentativa, pois pertencem ao “eixo parodístico”. As retomadas aos gêneros cinematográficos terror com vampiros e faroeste instauraram a paródia, uma vez que tais recuperações são responsáveis pelo estabelecimento do efeito humorístico.

  6. Digital reactivity meter

    International Nuclear Information System (INIS)

    Akkus, B.; Anac, H.; Alsan, S.; Erk, S.

    1991-01-01

    Nowadays, various digital methods making use of microcomputers for neutron detector signals and determining the reactivity by numerical calculations are used in reactor control systems in place of classical reactivity meters. In this work, a calculation based on the ''The Time Dependent Transport Equation'' has been developed for determining the reactivity numerically. The reactivity values have been obtained utilizing a computer-based data acquisition and control system and compared with the analog reactivity meter values as well as the values calculated from the ''Inhour Equation''

  7. Method of controlling reactivity

    International Nuclear Information System (INIS)

    Tochihara, Hiroshi.

    1982-01-01

    Purpose: To improve the reactivity controlling characteristics by artificially controlling the leakage of neutron from a reactor and providing a controller for controlling the reactivity. Method: A reactor core is divided into several water gaps to increase the leakage of neutron, its reactivity is reduced, a gas-filled control rod or a fuel assembly is inserted into the gap as required, the entire core is coupled in a system to reduce the leakage of the neutron, and the reactivity is increased. The reactor shutdown is conducted by the conventional control rod, and to maintain critical state, boron density varying system is used together. Futher, a control rod drive is used with that similar to the conventional one, thereby enabling fast reactivity variation, and the positive reactivity can be obtained by the insertion, thereby improving the reactivity controlling characteristics. (Yoshihara, H.)

  8. Volatilisation and catalytic effects of alkali and alkaline earth metallic species during the pyrolysis and gasification of Victorian brown coal. Part IV. Catalytic effects of NaCl and ion-exchangeable Na in coal on char reactivity

    Energy Technology Data Exchange (ETDEWEB)

    Dimple Mody Quyn; Hongwei Wu; Jun-ichiro Hayashi; Chun-Zhu Li, [Monash University, Monash, Vic. (Australia). CRC for Clean Power from Lignite, Department of Chemical Engineering

    2003-03-01

    The purpose of this study is to investigate the catalytic effects of Na as NaCl or as sodium carboxylates ( COONa) in Victorian brown coal on the char reactivity. A Na-exchanged coal and a set of NaCl-loaded coal samples prepared from a Loy Yang brown coal were pyrolysed in a fluidised-bed/fixed-bed reactor and in a thermogravimetric analyser (TGA). The reactivities of the chars were measured in air at 400{sup o}C using the TGA. The experimental data indicate that the Na in coal as NaCl and as sodium carboxylates ( COONa) had very different catalytic effects on the char reactivity. It is the chemical form and dispersion of Na in char, not in coal, that govern the catalytic effects of Na. For the Na-form (Na-exchanged) coal, the char reactivity increased with increasing pyrolysis temperature from 500 to 700{sup o}C and then decreased with pyrolysis temperature from 700 to 900{sup o}C. The increase in reactivity with pyrolysis temperature (500 700{sup o}C) is mainly due to the changes in the relative distribution of Na in the char matrix and on the pore surface. For the NaCl-loaded coals, when Cl was released during pyrolysis or gasification, the Na originally present in coal as NaCl showed good catalytic effects for the char gasification. Otherwise, Cl would combine with Na in the char to form NaCl during gasification, preventing Na from becoming an active catalyst. Controlling the pyrolysis conditions to favour the release of Cl can be a promising way to transform NaCl in coal into an active catalyst for char gasification. 38 refs., 5 figs.

  9. Ion-ion collisions

    International Nuclear Information System (INIS)

    Salzborn, Erhard; Melchert, Frank

    2000-01-01

    Collisions between ions belong to the elementary processes occurring in all types of plasmas. In this article we give a short overview about collisions involving one-electron systems. For collisions involving multiply-charged ions we limit the discussion to one specific quasi-one-electron system. (author)

  10. Predição de Séries Temporais de parâmetros de Rede WCDMA – HSPA

    Directory of Open Access Journals (Sweden)

    Tiago dos Santos Bezerra

    2014-02-01

    Full Text Available Em telecomunicações, com o crescimento da demanda de tráfego de dados nas redes de terceira geração (3G, as operadoras de telefonia móvel têm atentado para o direcionamento dos recursos em infraestrutura nos locais onde se identifica maior necessidade. O direcionamento desses investimentos tem o objetivo de manter a qualidade do serviço prestado, principalmente, em regiões urbanas densas. Neste trabalho, é realizada a predição de séries temporais em redes HSPA – WCDMA dos parâmetros: potência recebida (Rx Power, potência de código do sinal recebido (Received Signal Code Power – RSCP, relação energia por chip em função da interferência (Energy per chip/Interference – Ec/Io e taxa de transmissão (throughput na camada física. A coleta dos valores dos parâmetros foi realizada numa rede em pleno funcionamento através de um drive test na cidade de Natal – RN. O modelo utilizado para predição das séries temporais foi o Modelo de Alisamento Exponencial de Holt. O objetivo das predições das séries temporais é verificar para quais parâmetros da rede HSPA – WCDMA o modelo de Holt melhor se adequou.

  11. Reactive Programming in Java

    CERN Document Server

    CERN. Geneva

    2017-01-01

    Reactive Programming in gaining a lot of excitement. Many libraries, tools, and frameworks are beginning to make use of reactive libraries. Besides, applications dealing with big data or high frequency data can benefit from this programming paradigm. Come to this presentation to learn about what reactive programming is, what kind of problems it solves, how it solves them. We will take an example oriented approach to learning the programming model and the abstraction.

  12. BN600 reactivity definition

    International Nuclear Information System (INIS)

    Zheltyshev, V.; Ivanov, A.

    2000-01-01

    Since 1980, the fast BN600 reactor with sodium coolant has been operated at Beloyarsk Nuclear Power Plant. The periodic monitoring of the reactivity modifications should be implemented in compliance with the standards and regulations applied in nuclear power engineering. The reactivity measurements are carried out in order to confirm the basic neutronic features of a BN600 reactor. The reactivity measurements are aimed to justify that nuclear safety is provided in course of the in-reactor installation of the experimental core components. Two reactivity meters are to be used on BN600 operation: 1. Digital on-line reactivity calculated under stationary reactor operation on power (approximation of the point-wise kinetics is applied). 2. Second reactivity meter used to define the reactor control rod operating components efficiency under reactor startup and take account of the changing efficiency of the sensor, however, this is more time-consumptive than the on-line reactivity meter. The application of two reactivity meters allows for the monitoring of the reactor reactivity under every operating mode. (authors)

  13. Utilização do software estatístico r na previsão de séries temporais: série prêmio de resseguro

    Directory of Open Access Journals (Sweden)

    Rafael Ferraz de Moraes

    2014-08-01

    Full Text Available 10.12957/cadest.2011.15727O objetivo dos autores no presente artigo é a utilização de modelos estocásticos da família SARIMA multiplicativo, de Box & Jenkins, para análise e previsão de séries temporais. Para tanto, é utilizado o software R, um pacote estatístico desenvolvido em ambiente livre e muito utilizado nas universidades. Para o estudo de caso de aplicação e funcionalidade do software, nas fases de identificação e estimação de modelos, foi utilizada a série temporal Prêmio de Resseguro de jan/2001 a dez/2008. Dessa forma, são descritos os modelos utilizados, os passos básicos com a linguagem de programação R, os resultados obtidos e as considerações finais

  14. Ion implantation

    International Nuclear Information System (INIS)

    Dearnaley, Geoffrey

    1975-01-01

    First, ion implantation in semiconductors is discussed: ion penetration, annealing of damage, gettering, ion implanted semiconductor devices, equipement requirements for ion implantation. The importance of channeling for ion implantation is studied. Then, some applications of ion implantation in metals are presented: study of the corrosion of metals and alloys; influence or ion implantation on the surface-friction and wear properties of metals; hyperfine interactions in implanted metals

  15. Characterization of Low Noise TES Detectors Fabricated by D-RIE Process for SAFARI Short-Wavelength Band

    Science.gov (United States)

    Khosropanah, P.; Suzuki, T.; Hijmering, R. A.; Ridder, M. L.; Lindeman, M. A.; Gao, J.-R.; Hoevers, H.

    2014-08-01

    SRON is developing TES detectors based on a superconducting Ti/Au bilayer on a suspended SiN membrane for the short-wavelength band of the SAFARI instrument on SPICA mission. We have recently replaced the wet KOH etching of the Si substrate by deep reactive ion etching. The new process enables us to fabricate the detectors on the substrate and release the membrane at the very last step. Therefore the production of SAFARI large arrays (4343) on thin SiN membrane (250 nm) is feasible. It also makes it possible to realize narrow supporting SiN legs of 1 m, which are needed to meet SAFARI NEP requirements. Here we report the current-voltage characteristics, noise performance and impedance measurement of these devices. The measured results are then compared with the distributed leg model that takes into account the thermal fluctuation noise due to the SiN legs. We measured a dark NEP of 0.7 aW/, which is 1.6 times higher than the theoretically expected phonon noise.

  16. O Cloze como instrumento de avaliação de leitura nas séries iniciais

    Directory of Open Access Journals (Sweden)

    Márcia Maria Peruzzi Elia da Mota

    Full Text Available A literatura na área tem apontado a importância das habilidades referentes à leitura e escrita, especialmente quando se estuda o processo de alfabetização e suas dificuldades. Buscando verificar a validade do Cloze como instrumento de avaliação de leitura, o presente estudo foi elaborado tendo como principal objetivo comparar os escores do Cloze com o Teste de Desempenho Escolar (TDE, que apresenta, além de estudos de validade e precisão, também uma proposta de normatização. A amostra do estudo constituiu-se de quarenta e duas crianças, das quais dezenove eram alunas da 1ª série e vinte e três da 2ª série (no sistema atual, 2º ano e 3º ano do Ensino Fundamental de escolas particulares situadas no Interior de Minas. Os resultados mostram evidências de validade de critério e convergência para o Cloze e indicam sua utilidade como um teste de avaliação de leitura.

  17. As máscaras de Jon Snow: diferentes identidades do personagem da série Game of Thrones

    Directory of Open Access Journals (Sweden)

    Paloma Rodrigues Destro Couto

    2013-12-01

    Full Text Available Este trabalho pretende analisar questões identitárias presentes na série norte-americana Game of Thrones, com enfoque no personagem Jon Snow (Kit Harington. O aparato teórico necessário é pautado nos Estudos Culturais. A metodologia é focada nos diálogos entre os personagens. Percebe-se, nas três temporadas já exibidas, que a identidade de Jon é alterada de acordo com as circunstâncias externas, sendo construída segundo o ambiente em que se encontra, as relações estabelecidas com a alteridade e a luta pela sobrevivência. Assim, percebemos a importância de produtos audiovisuais como o analisado no contexto de mediações identitárias, já que a série acaba por reproduzir o que se vive na contemporaneidade: apesar de ambientada na Idade Média, possui abordagens atuais. O que motiva uma ampla aceitação pelo público, que a elevou ao patamar de grande sucesso.

  18. AvaliaÃÃo dos fatores de risco à cÃrie dentÃria em pacientes pediÃtricos portadores de necessidades especiais.

    OpenAIRE

    Rebeca Bastos Vasconcelos

    2014-01-01

    Quando se trata de atenÃÃo odontolÃgica bÃsica ou especializada, crianÃas portadoras de necessidades especiais ainda representam uma parcela da populaÃÃo menos favorecida e estudada. O estudo teve o objetivo de avaliar a associaÃÃo entre presenÃa de lesÃo e experiÃncia de cÃrie a fatores de risco à cÃrie, em uma amostra de pacientes pediÃtricos portadores de necessidades especiais utilizando o critÃrio do Indice Internacional de DetecÃÃo de CÃries (ICDAS). A amostra foi composta por crianÃas ...

  19. Efetividade da fluorescência a laser no diagnóstico de lesões de cárie. Estudos in vitro e in vivo

    OpenAIRE

    Diniz, Michele Baffi [UNESP

    2006-01-01

    O objetivo do presente estudo foi avaliar a efetividade da fluorescência a laser (KaVo DIAGNOdent) para a determinação da severidade de lesões de cárie oclusal em dentes permanentes in vivo e para determinação da remineralização in vitro de lesões de cárie induzidas artificialmente em esmalte de dentes bovinos. No estudo in vitro, 78 blocos de esmalte com lesões de cárie artificial (mancha branca) com valores de dureza Vickers de 38,48 l 0,85 foram submetidos ao tratamento com dentifrício flu...

  20. "Velvet":Sous-titrage de l'épisode 1 de la série de R. Campos et G.R. Neira

    OpenAIRE

    De Corte, Inès

    2017-01-01

    Sous-titrage du premier épisode de la série "Velvet" réalisée par R. Campos et G.R. Neira et produite par Bambú Producciones. Contextualisation de la série dans l'histoire et dans les jeux d'influences de l'industrie de la mode afin d'évaluer l'adaptation de la série et sa crédibilité historique. Commentaires de traduction expliquant le processus de traduction, la réflexion et la méthodologie employées. Master [120] en traduction, Université catholique de Louvain, 2017

  1. Chemical reactivity of cation-exchanged zeolites

    OpenAIRE

    Pidko, E.A.

    2008-01-01

    Zeolites modified with metal cations have been extensively studied during the last two decades because of their wide application in different technologically important fields such as catalysis, adsorption and gas separation. Contrary to the well-understood mechanisms of chemical reactions catalyzed by Brønsted acid sites in the hydrogen forms of zeolites, the nature of chemical reactivity, and related, the structure of the metal-containing ions in cation-exchanged zeolites remains the subject...

  2. Electrospinning of reactive mesogens

    NARCIS (Netherlands)

    Yao, J.; Picot, O.T.; Hughes-Brittain, N.F.; Bastiaansen, C.W.M.; Peijs, T.

    2016-01-01

    The reinforcement potential of reactive liquid crystals or reactive mesogens (RMs) in electrospun fibers was investigated through the blending of two types of RMs (RM257 and RM82) with two types of thermoplastics; polyamide 6 (PA6) and poly(methyl methacrylate) (PMMA). Polymer/RM blends were

  3. Des périphéries « utiles » Usefull Peripheries

    Directory of Open Access Journals (Sweden)

    Jacques Ivanoff

    2012-10-01

    Full Text Available L’accroissement des échanges d’hommes et de marchandises entrainé par la vision libérale d’un grand marché sans frontières redéfinit le travail de l’ethnologue qui doit prendre en compte les nouvelles recompositions des populations « de frontières » autrefois marginalisées. Ces populations sont autant des groupes sociaux que des ethnies, chacun d’eux renégociant sa position au sein des États-Nations, rappelant en préambule les notions de choix, d’idéologie nomade et les travaux sur les relations entre nomades et sédentaires. L’anthropologie des frontières est donc un champ de recherche qui doit utiliser les outils classiques de l’ethnologie tout en comprenant les enjeux ethniques des périphéries qui n’en sont plus. Les frontières ont toujours été des espaces de négociations organiquement liées aux centres et les ethnies qui y demeurent utilisent les nouvelles opportunités sociales, économiques et politiques de la « globalisation » pour construire, affirmer ou transcender leur ethnicité qui doit fonctionner de concert avec la nouvelle marche du monde. La disparition des ethnies n’est pas a l’ordre du jour, mais bien au contraire, fait apparaitre la résilience de ces peuples qui autorisent au chercheur l’observation d’un renouveau des dynamiques latentes propres a chaque ethnie. Les modes d’appropriation des ressources, des territoires, des points de passages sont autant de points de négociation pour ces populations qui bien qu’entrant dans le mouvement général de la nouvelle mobilité mondiale n’en révèlent pas moins leur véritable « cœur culturel », leur fond ethnique qu’elles doivent préserver.Driven by the vision of a large market without borders, the increase in exchanging people and goods has redefined the work of the anthropologist, who must now take into account new reconstructions of borderland populations who were once marginalized. These populations are

  4. rie dentária, disponibilidade de açúcar e fatores associados nas capitais brasileiras em 2003: um estudo ecológico

    Directory of Open Access Journals (Sweden)

    Michele Martins Gonçalves

    Full Text Available INTRODUÇÃO: A associação entre a disponibilidade de açúcar e a cárie dentária, utilizando-se dados populacionais, ainda não foi testada na população brasileira. OBJETIVO: Investigar a associação entre a experiência de cárie em crianças e a disponibilidade domiciliar de açúcar no Brasil, em 2003. Buscou-se ainda testar a provável influência de indicadores socioeconômicos e do acesso à água fluoretada. MATERIAL E MÉTODO: Este estudo ecológico analisou dados das 27 capitais brasileiras sobre cárie em crianças de cinco e 12 anos, e abastecimento de água fluoretada, obtidos do levantamento nacional de saúde bucal de 2003. Os dados sobre disponibilidade domiciliar de açúcar foram obtidos da Pesquisa de Orçamento Familiar (POF de 2003 e, sobre indicadores socioeconômicos, do Programa das Nações Unidas para o Desenvolvimento em 2000. Na análise estatística, foram utilizados testes de correlação e regressão linear simples e múltipla. RESULTADO: Não houve associação significativa entre a experiência de cárie em crianças de cinco anos e as variáveis independentes. Na idade de 12 anos, menor experiência de cárie foi correlacionada à maior aquisição de refrigerantes, ao maior tempo de fluoretação e ao IDH e à renda per capita mais elevados. O resultado da regressão linear múltipla, ajustado pelo tempo de fluoretação das águas, indicou que esta variável explica os níveis de cárie mais baixos. Após o ajuste pelos demais fatores, nenhuma variável foi associada à cárie. CONCLUSÃO: Não houve associação entre a experiência de cárie em crianças e a disponibilidade domiciliar de açúcar nas capitais brasileiras em 2003, quando indicadores socioeconômicos e presença de água fluoretada foram considerados na análise.

  5. Étude phénotypique de la résistance des bactéries isolées des eaux ...

    African Journals Online (AJOL)

    Méthodologie et résultats: Ces bactéries ont d'abords été identifiées par le système Api 20 E, puis soumises à l'antibiogramme pour évaluer leur sensibilité aux quatre (4) antibiotiques. De ce fait, la sensibilité des bactéries aux céphalosporines de troisième génération a été évaluée par la méthode de puits dans la gélose ...

  6. MaRIE 1.0: The Matter-Radiation Interactions in Extremes Project, and the Challenge of Dynamic Mesoscale Imaging

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, Cris William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Barber, John L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kober, Edward Martin [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lookman, Turab [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sandberg, Richard L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Shlachter, Jack S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sheffield, Richard L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-02-23

    The Matter-Radiation Interactions in Extremes project will build the experimental facility for the time-dependent control of dynamic material performance. An x-ray free electron laser at up to 42-keV fundamental energy and with photon pulses down to sub-nanosecond spacing, MaRIE 1.0 is designed to meet the challenges of time-dependent mesoscale materials science. Those challenges will be outlined, the techniques of coherent diffractive imaging and dynamic polycrystalline diffraction described, and the resulting requirements defined for a coherent x-ray source. The talk concludes with the role of the MaRIE project and science in the future.

  7. Industrial ion source technology

    Science.gov (United States)

    Kaufman, H. R.; Robinson, R. S.

    1978-01-01

    An analytical model was developed to describe the development of a coned surface texture with ion bombardment and simultaneous deposition of an impurity. A mathematical model of sputter deposition rate from a beveled target was developed in conjuction with the texturing models to provide an important input to that model. The establishment of a general procedure that will allow the treatment of manay different sputtering configurations is outlined. Calculation of cross sections for energetic binary collisions was extened to Ar, Kr.. and Xe with total cross sections for viscosity and diffusion calculated for the interaction energy range from leV to 1000eV. Physical sputtering and reactive ion etching experiments provided experimental data on the operating limits of a broad beam ion source using CF4 as a working gas to produce reactive species in a sputtering beam. Magnetic clustering effects are observed when Al is seeded with Fe and sputtered with Ar(?) ions. Silicon was textured at a micron scale by using a substrate temperature of 600 C.

  8. Ús il·lícit i falsificació de targetes bancàries

    Directory of Open Access Journals (Sweden)

    Luis Ramón Ruiz

    2006-11-01

    Full Text Available

    Les targetes bancàries, de crèdit i de dèbit, han constitu¨t tradicionalment l'objecte central dels atacs no violents a patrimonis de les entitats bancàries i dels seus clients, a partir de la utilització de tecnologies basades en el desenvolupament de la informàtica i de les telecomunicacions. Si bé altres fraus i atacs patrimonials s'han sumat a aquestes pràctiques, el frau de targetes continua constituint una realitat criminològica de primer ordre.

    La resposta del dret penal a aquestes pràctiques ha anat mantenint una notable falta de sistemàtica, que en certa manera ha estat substitu¨da per l'actuació dels tribunals, els quals han anat distribuint la variada fenomenologia delictiva en els diferents tipus penals en els quals han encaixat millor. L'absència d'un delicte de frau amb targetes, la possibilitat d'actuar il·lícitament amb targetes reals o de confecció falsa, l'ús d'aquestes en caixers automàtics, en comerços o la seva numeració per Internet dificulten notablement la qualificació jurídica de les conductes. Els tribunals han anat aplicant els delictes de robatori amb força, estafa i estafa informàtica segons l'execució concreta de la conducta delictiva derivada de l'ús il·lícit de la targeta, si bé la voluntat de reduir al màxim els espais d'impunitat ha portat en algunes resolucions judicials a forçar la interpretació dels tipus penals més enllà de l'exigible.

    A això cal sumar-hi el tractament incongruent que el legislador ha donat a la falsificació de targetes bancàries, assimilant-la de forma genèrica a la falsificació de moneda, provocant una interpretació novament extensiva del Tribunal Suprem i assignant-li una penalitat sens dubte desorbitada.

    El recurs al principi de legalitat i al de protecció exclusiva de béns jurídics s'imposa en una matèria normativament confusa i amb un tractament judicial erràtic.

  9. The Nördlingen-Ries Geopark and nearby museums as a natural teaching laboratory for Geoscience students

    Science.gov (United States)

    Kaminski, Michael; Kaka, SanLinn; Kaminski, Matthew

    2017-04-01

    The hypervelocity impact of an asteroid in southern Germany around 15 million years ago not only caused an environmental catastrophe, but it also created a scenario that provides us with a world-class natural laboratory for teaching the basic Principles of Geology. The combination of museum visits and observation of rock outcrops enables the student to reinforce or rediscover the basic principles of physical and historical Geology that are presented in first- or second-year Geoscience courses. At KFUPM, our visit to the Ries Geopark begins at the Ries Crater Museum in Nördlingen, where students review knowledge learned in their Physical Geology course: the Nebular Theory, origin of the solar system, and the classification of meteorites based on real examples. Students then learn the stages of impact crater formation, shock metamorphism, and the products of impact crater formation such as tectites, impact breccia and suevite. Students also become familiar with the Mesozoic stratigraphy of Southern Germany, reviewing basic principals of stratigraphy. Visits to local outcrops reinforce the knowledge gained at the Museum. A visit to the nearby Solnhofen Museum and quarries provides insight into the nature of the late Jurassic animals that lived at the edge of the Tethys Sea, reinforcing many topics learned during their second-year Paleontology course, such as taphonomy, and the idea of a death assemblage. At the Museum of the Geosciences Department of the University of Tübingen, the students become familiar with Mesozoic ammonoids as part of their second-year Paleontology course. A visit to the Urwelt Museum and quarry in Holzmaden explores animal life during the Early Jurassic, stratigraphic principles as presented on the museum's "geological staircase", and the origin of petroleum source rocks. The museum houses spectacular examples of Early Jurassic marine reptiles. All knowledge gained in the Jurassic of southern Germany enriches the students' understanding of

  10. (Electronic structure and reactivities of transition metal clusters)

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The following are reported: theoretical calculations (configuration interaction, relativistic effective core potentials, polyatomics, CASSCF); proposed theoretical studies (clusters of Cu, Ag, Au, Ni, Pt, Pd, Rh, Ir, Os, Ru; transition metal cluster ions; transition metal carbide clusters; bimetallic mixed transition metal clusters); reactivity studies on transition metal clusters (reactivity with H{sub 2}, C{sub 2}H{sub 4}, hydrocarbons; NO and CO chemisorption on surfaces). Computer facilities and codes to be used, are described. 192 refs, 13 figs.

  11. Digital reactivity meter

    International Nuclear Information System (INIS)

    Jiang Zongbing

    1996-02-01

    The importance and the usual methods of reactivity measurement in a nuclear reactor are presented. Emphasis is put upon the calculation principle, software and hardware components, main specifications, application, as well as the features of the digital reactivity meter. The test results of operation in various reactors shown that the meter possess the following features: high accuracy, short response time, low output noise, high resolution, wide measuring range, simple and flexible to operate, high stability and reliability. In addition, the reactivity meter can save the measuring data automatically and have a perfect capability of self-verifying. It not only meet the requirement of the reactivity measurement in nuclear power plant, but also can be applied to various types of reactors. (1 tab.)

  12. Stress Reactivity in Insomnia.

    Science.gov (United States)

    Gehrman, Philip R; Hall, Martica; Barilla, Holly; Buysse, Daniel; Perlis, Michael; Gooneratne, Nalaka; Ross, Richard J

    2016-01-01

    This study examined whether individuals with primary insomnia (PI) are more reactive to stress than good sleepers (GS). PI and GS (n = 20 per group), matched on gender and age, completed three nights of polysomnography. On the stress night, participants received a mild electric shock and were told they could receive additional shocks during the night. Saliva samples were obtained for analysis of cortisol and alpha amylase along with self-report and visual analog scales (VAS). There was very little evidence of increased stress on the stress night, compared to the baseline night. There was also no evidence of greater stress reactivity in the PI group for any sleep or for salivary measures. In the GS group, stress reactivity measured by VAS scales was positively associated with an increase in sleep latency in the experimental night on exploratory analyses. Individuals with PI did not show greater stress reactivity compared to GS.

  13. Structure, Reactivity and Dynamics

    Indian Academy of Sciences (India)

    Understanding structure, reactivity and dynamics is the core issue in chemical ... functional theory (DFT) calculations, molecular dynamics (MD) simulations, light- ... between water and protein oxygen atoms, the superionic conductors which ...

  14. Taskable Reactive Agent Communities

    National Research Council Canada - National Science Library

    Myers, Karen

    2002-01-01

    The focus of Taskable Reactive Agent Communities (TRAC) project was to develop mixed-initiative technology to enable humans to supervise and manage teams of agents as they perform tasks in dynamic environments...

  15. Reactive sputter deposition

    CERN Document Server

    Mahieu, Stijn

    2008-01-01

    In this valuable work, all aspects of the reactive magnetron sputtering process, from the discharge up to the resulting thin film growth, are described in detail, allowing the reader to understand the complete process. Hence, this book gives necessary information for those who want to start with reactive magnetron sputtering, understand and investigate the technique, control their sputtering process and tune their existing process, obtaining the desired thin films.

  16. Pratiques alimentaires des diabétiques. Étude de quelques cas à Oran (Algérie)

    OpenAIRE

    Salemi, Ouassila

    2012-01-01

    Cette étude a été menée à Oran (Algérie). Elle tente d’appréhender les enjeux liés au suivi du régime alimentaire. Il s’agit de montrer toute la complexité des pratiques alimentaires auxquelles sont confrontés les diabétiques, de saisir de l’intérieur leurs logiques et les motivations qui président au suivi ou non du régime alimentaire. Il en ressort que l’adoption ou non du régime alimentaire ne dépend pas uniquement de la volonté du diabétique. Il ne s’agit pas simplement d’ordonner l’appli...

  17. A importância da leitura nas séries iniciais do Ensino Fundamental I

    OpenAIRE

    Marinéa Figueira Rodrigues; Sheila Alves Diniz Ferreira

    2016-01-01

    O presente estudo objetivou investigar a importância da leitura nas Séries Iniciais do Ensino Fundamental, ressaltando a relevância dessa temática como condição essencial para a formação de leitores proficientes. A partir de um breve relato sobre a gênese da Leitura e sua evolução, elaborou-se uma análise minuciosa sobre sua origem desde a Antiguidade até a ampliação de seu conceito no mundo contemporâneo. Dentro deste contexto, destacam-se também a relevância da leitura no contexto escolar, ...

  18. Disfagia orofaríngea na Síndrome de Wallenberg - série de casos

    OpenAIRE

    Bilheri,Diego Fernando Dorneles; Mancopes,Renata; Almeida,Sheila Tamanini de

    2016-01-01

    RESUMO: Objetivo: caracterizar o quadro de comprometimento da função da deglutição em pacientes com Síndrome de Wallenberg. Métodos: série de casos de sete pacientes, com diagnóstico dessa síndrome, encaminhados para avaliação fonoaudiológica. Para avaliação do grau de disfagia utilizou-se a escala Gugging Swallowing Screen e para avaliar o nível de ingestão oral utilizou-se a Functional Oral Intake Scale. Resultados: a média de idade foi de 60,57 anos; todos os sujeitos apresentaram alter...

  19. Sarah Sepulchre, dir. Décoder les séries télévisées.

    Directory of Open Access Journals (Sweden)

    Jan Baetens

    2011-08-01

    Full Text Available

    Sarah Sepulchre, dir. Décoder les séries télévisées.

    Bruxelles: De Boeck, coll. InfoCom, 2011-06-22 ISBN 978-2-8041-6375-4

  20. Etude de l'ensemencement des vins par les bactéries de la fermentation malolactique

    Directory of Open Access Journals (Sweden)

    Suzanne LAFON-LAFOURCADE

    1968-03-01

    Full Text Available L'aboutissement logique des études sur les bactéries de la fermentation malolactique est la maîtrise de cette transformation. On peut espérer la contrôler grâce à une bonne connaissance des exigences bactériennes, à la condition bien entendu que la microflore spontanée ait les qualités requises. Or cette microflore naturelle est variée et dispersée en de multiples espèces qui ne semblent pas uniformément répandues. Dans ces conditions, on peut craindre que certains vins conservent de l'acide malique par insuffisance quantitative ou qualitative de l'ensemencement naturel.

  1. Precision Recess of AlGaN/GaN with Controllable Etching Rate Using ICP-RIE Oxidation and Wet Etching

    NARCIS (Netherlands)

    Sokolovskij, R.; Sun, J.; Santagata, F.; Iervolino, E.; Li, S.; Zhang, G.Y.; Sarro, P.M.; Zhang, G.Q.

    2016-01-01

    A method for highly controllable etching of AlGaN/GaN for the fabrication of high sensitivity HEMT based sensors is developed. The process consists of cyclic oxidation of nitride with O2 plasma using ICP-RIE etcher followed by wet etching of the oxidized layer. Previously reported

  2. Implications for behavior of volatile elements during impacts—Zinc and copper systematics in sediments from the Ries impact structure and central European tektites

    Czech Academy of Sciences Publication Activity Database

    Rodovská, Z.; Magna, T.; Žák, Karel; Kato, C.; Savage, P. S.; Moynier, F.; Skála, Roman; Ježek, J.

    2017-01-01

    Roč. 52, č. 10 (2017), s. 2178-2192 ISSN 1086-9379 R&D Projects: GA ČR GA13-22351S Institutional support: RVO:67985831 Keywords : moldavites * tektites * Ries impact structure Subject RIV: DB - Geology ; Mineralogy OBOR OECD: Geology Impact factor: 2.391, year: 2016

  3. O vídeo como instrumento de pesquisa para o aluno de 5 ª série: um estudo exploratório

    Directory of Open Access Journals (Sweden)

    Eneida Baccaro Modonezi

    Full Text Available MODONEZI, E. B. O vídeo como instrumento de pesquisa para o aluno de 5 ª série: um estudo exploratório. 146 fl. 2008. Dissertação (Mestrado em Educação – Faculdade de Educação, Universidade Estadual de Campinas, Campinas, 2008.

  4. Uma análise sobre transmasculinidades presentes numa série da mídia televisiva

    Directory of Open Access Journals (Sweden)

    Thais Geraldo Oliveira de Aguiar

    2018-02-01

    Full Text Available Neste trabalho temos como objetivo analisar alguns significados sobre transmasculinidades presentes em dois episódios da série Liberdade de Gênero, exibida no canal de televisão brasileiro por assinatura GNT. Entendemos esta série como um potente artefato cultural para reflexão acerca das identidades trans, nela são apresentadas algumas histórias de pessoas que não se identificam com o gênero designado para elas ao nascerem, negando qualquer determinismo biológico. O preconceito, a exclusão social, a pressão religiosa e familiar que esses sujeitos vivenciam, no caso dos entrevistados, não venceram o desejo de ser quem sentiam ser. Nossos estudos têm como base os Estudos Culturais, na sua vertente pós-estruturalista, destacando o efeito das mídias na produção dos corpos e das sexualidades e também como produtora de saberes e conhecimentos, entendendo que os discursos veiculados pela mídia acionam efeitos de verdade e que essa proliferação de discursos vem atuando na produção dos sujeitos. A metodologia da pesquisa consiste na análise cultural, entendendo que esse tipo de análise é potente para pensar o quanto as pedagogias exercidas por estes artefatos são produtivas na constituição dos sujeitos e como vêm produzindo e reproduzindo significados acerca da transgeneridade, em específico sobre os homens trans.

  5. Curiosidades matemáticas nas aritméticas da série ordem e progresso

    Directory of Open Access Journals (Sweden)

    Malcus Cassiano Kuhn

    2017-12-01

    Full Text Available O artigo tem por objetivo fazer um resgate de curiosidades matemáticas presentes nas aritméticas da série Ordem e Progresso, editadas pela Igreja Evangélica Luterana do Brasil, por meio da Casa Publicadora Concórdia de Porto Alegre, na década de 1930, para suas escolas paroquiais no Rio Grande do Sul. Baseando-se no referencial da história cultural, analisaram-se a Primeira Aritmética e a Terceira Arithmetica da série Ordem e Progresso, identificando-se curiosidades envolvendo: construção do significado de número até 10; contas orais com as quatro operações elementares com números naturais até 100; procedimentos para decorar as tabuadas de multiplicar e dividir; informações sobre unidades de medidas do contexto dos alunos; relações entre as antigas medidas brasileiras e as medidas do sistema métrico; estudo da regra de três pela regra da dedução; cálculo do volume aproximado de um tronco de cone, de forma prática; determinação de números quadrados e da raiz quadrada fazendo associações com geometria e álgebra. Embora algumas dessas curiosidades estejam alicerçadas no método de ensino intuitivo, as mesmas ainda refletem a tradição pedagógica da memorização.

  6. Reactive intermediates in the gas phase generation and monitoring

    CERN Document Server

    Setser, D W

    2013-01-01

    Reactive Intermediates in the Gas Phase: Generation and Monitoring covers methods for reactive intermediates in the gas phase. The book discusses the generation and measurement of atom and radical concentrations in flow systems; the high temperature flow tubes, generation and measurement of refractory species; and the electronically excited long-lived states of atoms and diatomic molecules in flow systems. The text also describes the production and detection of reactive species with lasers in static systems; the production of small positive ions in a mass spectrometer; and the discharge-excite

  7. Ion implantation and fracture toughness of ceramics

    International Nuclear Information System (INIS)

    Clark, J.; Pollock, J.T.A.

    1985-01-01

    Ceramics generally lack toughness which is largely determined by the ceramic surface where stresses likely to cause failure are usually highest. Ion implantation has the capacity to improve the surface fracture toughness of ceramics. Significantly reduced ion size and reactivity restrictions exist compared with traditional methods of surface toughening. We are studying the effect of ion implantation on ceramic fracture toughness using indentation testing as the principal tool of analysis

  8. Adultos livres de cárie: estudo de casos e controles sobre conhecimentos, atitudes e práticas preventivas

    Directory of Open Access Journals (Sweden)

    Petry Paulo C.

    2000-01-01

    Full Text Available Com o objetivo de investigar o efeito do conhecimento e atitudes pessoais, hábitos de higiene oral e uso de fluoretos sobre a total ausência de cáries, realizou-se um estudo do tipo caso-controle entre estudantes universitários da região sul do Brasil. A análise bruta por regressão logística condicional não demonstrou efeito para as variáveis relacionadas ao uso de fluoretos e hábitos de higiene oral (p > 0,20. Já o uso de fio dental apareceu como um fator de risco: os que afirmaram não usá-lo apresentaram "odds ratio" (OR bruto de 0,70, e de 0,73 quando ajustado para visitas regulares ao dentista. O efeito para as visitas regulares ao dentista foi de risco. Pessoas com história de cárie visitavam mais os profissionais. Aqueles com história de cárie apresentaram um "odds ratio" bruto de 1,55; após o ajuste para uso de fio dental o risco foi levemente superior (OR = 1,67. Hábitos de higiene oral não demonstraram efeito protetor esperado. O uso de fluoretos não esteve significativamente associado à ausência de cáries. Permanece intrigando o fato de que algumas pessoas não desenvolvam cáries, mesmo não relatando cuidados considerados ideais à saúde bucal.

  9. A high-precision 40Ar/39Ar age for the Nördlinger Ries impact crater, Germany, and implications for the accurate dating of terrestrial impact events

    Science.gov (United States)

    Schmieder, Martin; Kennedy, Trudi; Jourdan, Fred; Buchner, Elmar; Reimold, Wolf Uwe

    2018-01-01

    40Ar/39Ar dating of specimens of moldavite, the formation of which is linked to the Ries impact in southern Germany, with a latest-generation ARGUS VI multi-collector mass spectrometer yielded three fully concordant plateau ages with a weighted mean age of 14.808 ± 0.021 Ma (± 0.038 Ma including all external uncertainties; 2σ; MSWD = 0.40, P = 0.67). This new best-estimate age for the Nördlinger Ries is in general agreement with previous 40Ar/39Ar results for moldavites, but constitutes a significantly improved precision with respect to the formation age of the distal Ries-produced tektites. Separates of impact glass from proximal Ries ejecta (suevite glass from three different surface outcrops) and partially melted feldspar particles from impact melt rock of the SUBO 18 Enkingen drill core failed to produce meaningful ages. These glasses show evidence for excess 40Ar introduction, which may have been incurred during interaction with hydrothermal fluids. Only partially reset 40Ar/39Ar ages could be determined for the feldspathic melt separates from the Enkingen core. The new 40Ar/39Ar results for the Ries impact structure constrain the duration of crater cooling, during the prevailing hydrothermal activity, to locally at least ∼60 kyr. With respect to the dating of terrestrial impact events, this paper briefly discusses a number of potential issues and effects that may be the cause for seemingly precise, but on a kyr-scale inaccurate, impact ages.

  10. Reactive power compensator

    Science.gov (United States)

    El-Sharkawi, Mohamed A.; Venkata, Subrahmanyam S.; Chen, Mingliang; Andexler, George; Huang, Tony

    1992-01-01

    A system and method for determining and providing reactive power compensation for an inductive load. A reactive power compensator (50,50') monitors the voltage and current flowing through each of three distribution lines (52a, 52b, 52c), which are supplying three-phase power to one or more inductive loads. Using signals indicative of the current on each of these lines when the voltage waveform on the line crosses zero, the reactive power compensator determines a reactive power compensator capacitance that must be connected to the lines to maintain a desired VAR level, power factor, or line voltage. Alternatively, an operator can manually select a specific capacitance for connection to each line, or the capacitance can be selected based on a time schedule. The reactive power compensator produces control signals, which are coupled through optical fibers (102/106) to a switch driver (110, 110') to select specific compensation capacitors (112) for connections to each line. The switch driver develops triggering signals that are supplied to a plurality of series-connected solid state switches (350), which control charge current in one direction in respect to ground for each compensation capacitor. During each cycle, current flows from ground to charge the capacitors as the voltage on the line begins to go negative from its positive peak value. The triggering signals are applied to gate the solid state switches into a conducting state when the potential on the lines and on the capacitors reaches a negative peak value, thereby minimizing both the potential difference and across the charge current through the switches when they begin to conduct. Any harmonic distortion on the potential and current carried by the lines is filtered out from the current and potential signals used by the reactive power compensator so that it does not affect the determination of the required reactive compensation.

  11. Reactive power compensator

    Energy Technology Data Exchange (ETDEWEB)

    El-Sharkawi, Mohamed A. (Renton, WA); Venkata, Subrahmanyam S. (Woodinville, WA); Chen, Mingliang (Kirkland, WA); Andexler, George (Everett, WA); Huang, Tony (Seattle, WA)

    1992-01-01

    A system and method for determining and providing reactive power compensation for an inductive load. A reactive power compensator (50,50') monitors the voltage and current flowing through each of three distribution lines (52a, 52b, 52c), which are supplying three-phase power to one or more inductive loads. Using signals indicative of the current on each of these lines when the voltage waveform on the line crosses zero, the reactive power compensator determines a reactive power compensator capacitance that must be connected to the lines to maintain a desired VAR level, power factor, or line voltage. Alternatively, an operator can manually select a specific capacitance for connection to each line, or the capacitance can be selected based on a time schedule. The reactive power compensator produces control signals, which are coupled through optical fibers (102/106) to a switch driver (110, 110') to select specific compensation capacitors (112) for connections to each line. The switch driver develops triggering signals that are supplied to a plurality of series-connected solid state switches (350), which control charge current in one direction in respect to ground for each compensation capacitor. During each cycle, current flows from ground to charge the capacitors as the voltage on the line begins to go negative from its positive peak value. The triggering signals are applied to gate the solid state switches into a conducting state when the potential on the lines and on the capacitors reaches a negative peak value, thereby minimizing both the potential difference and across the charge current through the switches when they begin to conduct. Any harmonic distortion on the potential and current carried by the lines is filtered out from the current and potential signals used by the reactive power compensator so that it does not affect the determination of the required reactive compensation.

  12. Digital reactivity meter

    International Nuclear Information System (INIS)

    Copie, M.; Valantic, B.

    1978-01-01

    Digital reactivity meters (DRM) are mostly used as measuring instruments, e.g. for calibration of control rods, and there are only a few cases of their incorporation into the control systems of the reactors. To move in this direction there is more development work needed. First of all, fast algorithms are needed for inverse kinetics equations to relieve the computer for more important tasks of reactor model solving in real time. The next problem, currently under investigation, is the incorporation of the reactor thermal-hydraulic model into the DRM so that it can be used in the power range. Such an extension of DHM allows presentation not only of the instantaneous reactivity of the system, but also the inserted reactivity can be estimated from the temperature reactivity feed-backs. One of the applications of this concept is the anomalous digital reactivity monitor (ADRN) as part of the reactor protection system. As a solution of the first problem, a fast algorithm for solving the inverse kinetics equations has been implemented in the off-line program RODCAL on CDC 1700 computer and tested for its accuracy by performing different control rod calibrations on the reactor TRIGA

  13. Evaluation of an approach for the characterization of reactive and available pools of 20 potentially toxic elements in soils: part II--solid-solution partition relationships and ion activity in soil solutions.

    Science.gov (United States)

    Rodrigues, S M; Henriques, B; Ferreira da Silva, E; Pereira, M E; Duarte, A C; Groenenberg, J E; Römkens, P F A M

    2010-12-01

    To assess environmental risks related to contaminants in soil it is essential to predict the available pool of inorganic contaminants at regional scales, accounting for differences between soils from variable geologic and climatic origins. An approach composed of a well-accepted soil extraction procedure (0.01 M CaCl(2)) and empirical Freundlich-type models in combination with mechanistically based models which to date have been used only in temperate regions was applied to 136 soils from a South European area and evaluated for its possible general use in risk assessment. Empirical models based on reactive element pools and soil properties (pH, organic carbon, clay, total Al, Fe and Mn) provided good estimations of available concentrations for a broad range of contaminants including As, Ba, Cd, Co, Cu, Hg, Mo, Ni, Pb, Sb, Se and Zn (r(2): 0.46-0.89). The variation of the pools of total Al in soils expressed the sorptive capacity of aluminosilicates and Al oxides at the surfaces and edges of clay minerals better than the actual variability of clay contents. The approach has led to recommendations for further research with particular emphasis on the impact of clay on the solubility of As and Sb, on the mechanisms controlling Cr and U availability and on differences in binding properties of soil organic matter from different climatic regions. This study showed that such approach may be included with a good degree of certainty for first step risk assessment procedures to identify potential risk areas for leaching and uptake of inorganic contaminants in different environmental settings. Copyright © 2010 Elsevier Ltd. All rights reserved.

  14. Ion-exchange voltammetry of tris(2,2'-bipyridine) nickel(II), cobalt(II), and Co(salen) at polyestersulfonated ionomer coated electrodes in acetonitrile: Reactivity of the electrogenerated low-valent complexes

    International Nuclear Information System (INIS)

    Buriez, Olivier; Moretto, Ligia M.; Ugo, Paolo

    2006-01-01

    The electrochemical behaviour of [Ni(bpy) 3 (BF 4 ) 2 ], [Co(bpy) 3 (BF 4 ) 2 ], and Co(salen) (where bpy = 2,2'-bipyridine, and salen N,N'-bis(salicylidene)ethylenediamine) is studied at a glassy carbon electrode modified with the poly(estersulfonate) ionomer Eastman AQ 55 in acetonitrile (MeCN). It is shown that the nickel complex is strongly incorporated into the polymer. The reduction of the divalent nickel compound features a two-electron process leading to a nickel(0) species which is released from the coating because of the lack of electrostatic attraction with the ionomer. Yet, the neutral zerovalent nickel-bipyridine complex is reactive towards ethyl 4-iodobenzoate and di-bromocyclohexane despite the presence of the polymer. The activation of the aryl halide occurs through an oxidative addition, whereas, an electron transfer is involved in the presence of the alkyl halide making the catalyst regeneration much faster in the latter case. The electrochemical study of [Co(bpy) 3 (BF 4 ) 2 ] shows that incorporation of the cobalt complex into the polymer is efficient, provided excess bpy is used. This excess bpy does not interfere with the electrocatalytic activity of the cobalt complex incorporated in the AQ coating and efficient electrocatalysis is observed towards di-bromocyclohexane and benzyl-bromide as substrates. Finally, replacement of the bpy ligand with the macrocycle N,N'-bis(salicylidene)ethylenediamine, salen, leads to the incorporation of the non-charged Co II (salen) complex into the AQ 55 polymer showing the relevancy of hydrophobic interactions. The reaction between the electrogenerated [Co I (salen)] - with 1,2-dibromocyclohexane exhibits a fast inner sphere electron transfer

  15. Les séries paléozoïques d'Afrique: une approche

    Science.gov (United States)

    Fabre, Jean

    The major part of the Gondwanan history of Africa took place during Paleozoic times. One can point out in the sedimentary record: the deposition of the molasses of the Pan-African chains and their pediplanation during the Cambrian; the relics of lithospheric anomalies remaining after the Pan-African event, expressed by epeirogenic swells, particularly in Central Africa and by the reactivation of Pan-African faults especially in the submeridian system in Central Sahara—these pre-existing structures control to large extent the sedimentation from the Lower Ordovician to Lower Devonian, the sands being transported towards the northern and southern margins of the continent; the Upper Paleozoic and Lower Mesozoic sedimentation occurs in a new tectonic environment related to the Variscan and Autrichian events which at least in the North are controlles by plate movements preceding and contemporaneous to the opening of Central Atlantic and Ligurian Tethys; the sedimentation is also strongly influenced by the climatic variations on a huge peneplaned supercontinent, accompanying polar wandering from the NW to the SE of Africa—the first Late Ordovician inlandsis centred in NW Africa cover a large part of the continent. The second extensive Permo-Carboniferous glaciation centred in southern Africa set off arid and semi-arid conditions in the north; the worldwide eustatic changes are indicated by large scale transgressions and regressions on the relatively stable Saharan platform whereas continuous marine sedimentation occured along the mobile northern and southern margins of the continent.

  16. Totaleindruck o impresión total: La Telésfora de Aquinas Ried como proyecto político, creación literario-musical, reflejo personal y encuentro con el otro Totaleindruck or total impression: Aquinas Ried's Telésfora as a Political Project, a Literary and Musical Creation, a Personal Reflection and an Encounter with the Others

    Directory of Open Access Journals (Sweden)

    José Manuel Izquierdo König

    2011-06-01

    Full Text Available La Telésfora (1847, ópera en tres actos de Aquinas Ried, se ha instalado desde los trabajos de Eugenio Pereira Salas, como el primer drama lírico escrito en suelo chileno. El presente ensayo busca discutir esta consideración a partir del único elemento que le sobrevive: su libreto. A partir del mismo, la obra de Ried se revela como un proyecto político concreto, un reflejo personal de sus ideas y su encuentro con los chilenos, alemanes y mapuches de mediados del siglo XIX. En este sentido, la figura de Aquinas Ried se amplía a todo un espectro de la vida musical y cosmopolita de la ciudad de Valparaíso y los inmigrantes en Chile.Telésfora (1847 is a three-act opera written by Aquinas Ried. Since the epoch of the Chilean music historian Eugenio Pereira Salas this work has been considered as the first lyrical drama composed in the Chilean territory after the independence. The following essay discusses this point in depth on the basis of the libretto, which is the only element of this opera that has remained. The libretto reveals a concrete political project as well as a personal reflection on Ried's ideas along with his encounter with Chileans, Germans and indigenous people of the nineteenth century. In this regard, the figure of Aquinas Ried reaches a wider spectrum encompassing the musical and cosmopolitan life of the city of Valparaiso and the immigrants in 19th-century Chile.

  17. Gênero e nação: a série fontes e a virilização da raça - Gender and nation: the série fontes and the virilization of the race

    Directory of Open Access Journals (Sweden)

    Cristiani Bereta da Silva, Maria Bernardete Ramos Flores

    2011-03-01

    Full Text Available O  objetivo desse artigo é fazer  um  exercício de  interpretação  da coleção didática conhecida como Série Fontes, de autoria de Henrique da Silva Fontes (1885-1966, como uma das leituras dadas a ler pela escola no contexto da construção da Nação republicana. Tal coleção foi distribuída gratuitamente na rede de Instrução Pública de Santa Catarina, e adotada também nos estabelecimentos de ensino privados, entre a década de 1920  até meados da década de 1950. Partimos do pressuposto que os manuais didáticos ocuparam  importante  função nas últimas décadas do século XIX e primeiras décadas do século XX, como veículos do projeto        de Estado Nação, respaldado primordialmente no ideário nacionalista. O foco principal da análise será o de perceber como nesse processo de formação de cidadãos e de construção da idéia  de pátria  moderna e civilizada, as pedagogias prescreviam o ethos da virilidade para almejar o progresso da Nação. Palavras-chave: gênero; nação; virilização da raça.   GENDER  AND NATION: THE SÉRIE FONTES AND THE VIRILIZATION OF THE RACE Abstract The aim of this article is to accomplish an exercise of interpretation of the educational collection known as Série Fontes, by Henrique da Silva Fontes (1885-1966, as one of the books given to the students by the school in the  context of the construction  of the republican Nation.   The collection was freely distributed in the public educational system of the state of Santa  Catarina, in  Brazil. It was also adopted in private schools from the  decade of 1920  until  the decade of 1950.   In  this  article  we assume that  the  schoolbooks played an important role as vehicles for the propagation of the State- Nation project and its nationalistic principles during the last decades of the 19th  century and the the first  decades  of the 20th  century. The focus of the analysis  will be identifying

  18. [Reactive collisions of high-temperature systems

    International Nuclear Information System (INIS)

    Graff, M.M.

    1990-01-01

    The object of this research is to study reactivity at superthermal collision energies using a fast neutral beam that is generated by photodetachment. Systems scheduled for initial study include basic oxygen-hydrogen reactions. Unfortunately, we can not yet report realization of this goal, but during this funding period we have made advances that are anticipated to lead to successful measurements during the next year. The parameters described below refer to the model system O + H 2 → OH + H. The basic design involves the collision of fast neutrals, created by photodetachment of the corresponding negative molecular ion, with a stable reactant gas in a collision cell. Products are detected by ionization and mass analysis. We are equipped to study rotational effects on reactivity by comparing results for rotational levels J = 0 and 1 of H 2 . Highlights during the funding period are given in this report

  19. Spring 5 & reactive streams

    CERN Multimedia

    CERN. Geneva; Clozel, Brian

    2017-01-01

    Spring is a framework widely used by the world-wide Java community, and it is also extensively used at CERN. The accelerator control system is constituted of 10 million lines of Java code, spread across more than 1000 projects (jars) developed by 160 software engineers. Around half of this (all server-side Java code) is based on the Spring framework. Warning: the speakers will assume that people attending the seminar are familiar with Java and Spring’s basic concepts. Spring 5.0 and Spring Boot 2.0 updates (45 min) This talk will cover the big ticket items in the 5.0 release of Spring (including Kotlin support, @Nullable and JDK9) and provide an update on Spring Boot 2.0, which is scheduled for the end of the year. Reactive Spring (1h) Spring Framework 5.0 has been released - and it now supports reactive applications in the Spring ecosystem. During this presentation, we'll talk about the reactive foundations of Spring Framework with the Reactor project and the reactive streams specification. We'll al...

  20. Clojure reactive programming

    CERN Document Server

    Borges, Leonardo

    2015-01-01

    If you are a Clojure developer who is interested in using Reactive Programming to build asynchronous and concurrent applications, this book is for you. Knowledge of Clojure and Leiningen is required. Basic understanding of ClojureScript will be helpful for the web chapters, although it is not strictly necessary.

  1. A Universal Reactive Machine

    DEFF Research Database (Denmark)

    Andersen, Henrik Reif; Mørk, Simon; Sørensen, Morten U.

    1997-01-01

    Turing showed the existence of a model universal for the set of Turing machines in the sense that given an encoding of any Turing machine asinput the universal Turing machine simulates it. We introduce the concept of universality for reactive systems and construct a CCS processuniversal...

  2. Chemical Reactivity Test (CRT)

    Energy Technology Data Exchange (ETDEWEB)

    Zaka, F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-12-13

    The Chemical Reactivity Test (CRT) is used to determine the thermal stability of High Explosives (HEs) and chemical compatibility between (HEs) and alien materials. The CRT is one of the small-scale safety tests performed on HE at the High Explosives Applications Facility (HEAF).

  3. Reactive power compensating system

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Timothy J. (Redondo Beach, CA); El-Sharkawi, Mohamed A. (Renton, WA); Venkata, Subrahmanyam S. (Seattle, WA)

    1987-01-01

    The reactive power of an induction machine is compensated by providing fixed capacitors on each phase line for the minimum compensation required, sensing the current on one line at the time its voltage crosses zero to determine the actual compensation required for each phase, and selecting switched capacitors on each line to provide the balance of the compensation required.

  4. Reactive Power Compensating System.

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Timothy J.; El-Sharkawi, Mohamed A.; Venkata, Subrahmanyam S.

    1985-01-04

    The circuit was designed for the specific application of wind-driven induction generators. It has great potential for application in any situation where a varying reactive power load is present, such as with induction motors or generators, or for transmission network compensation.

  5. The iodine reactivity

    International Nuclear Information System (INIS)

    2003-01-01

    The iodine is an important element because it has long life isotopes (such as iodine 129) and a great mobility in natural media. Iodine presents a complex chemistry because of its volatility and its strong redox reactivity. The S.E.C.R. works to better understand the reactivity of this element in different natural, industrial or biological environments. It plays a part in thermochemical sites as a possible way of hydrogen formation. This seminar gives some aspects relative to the chemical reactivity of iodine, since its thermochemistry in the I/S cycles to produce hydrogen to its reactivity in the natural medium and its potential radiological impact. This document includes 4 presentations transparencies) dealing with: the 129 I cycle rejected in the low radioactive gaseous and liquid effluents of the La Hague reprocessing plant (C. Frechou); a bibliographic review of iodine retention in soils (F. Bazer-Bachi); the hydrogen production and the iodine/sulfur thermochemical cycle (role of iodine in the process); and the direct characterization by electro-spray ionization mass spectroscopy of iodine fixation by fulvic acids (P. Reiller, B. Amekraz, C. Moulin, V. Moulin)

  6. Upscaling of reactive flows

    NARCIS (Netherlands)

    Kumar, K.

    2012-01-01

    The thesis deals with the upscaling of reactive flows in complex geometry. The reactions which may include deposition or dissolution take place at a part of the boundary and depending on the size of the reaction domain, the changes in the pore structure that are due to the deposition process may or

  7. Fluosilicato de zinco na prevenção de cárie dental em ratos

    Directory of Open Access Journals (Sweden)

    Yvette Viegas

    1967-06-01

    Full Text Available O propósito desta pesquisa foi verificar uma possível ação sinérgica entre flúor e zinco na incidência da cárie dental. O estudo compreendeu três grupos de ratos que receberam soluções de: a fluoreto de sódio (1 ppm ; b fluosilicato de zinco; c e água, respectivamente. Todos os grupos, com ratos machos e fêmeas, eram divididos em subgrupos de acôrdo com a dieta - cariogênica e não cariogênica. Os dados obtidos foram submetidos à análise de variância, concluíndo-se o seguinte: I O grupo que recebeu fluosilicato de zinco apresentou menor número de cáries do que o do fluoreto de sódio, mas a diferença não foi estatìsticamente significante, sendo, porém, significante entre êstes dois grupos e o da água. II Os ratos que receberam o fluosilicato de zinco ou o fluoreto de sódio, mostraram nível mais elevado de flúor nas cinzas dos ossos, mas a diferença entre os dois grupos não foi estatìsticamente significante, III Notou-se também que apresentavam similar desmineralização óssea.The purpose of this research performed in rats (Rattus norwegicus was to observe if there is a synergic action of fluorine and zinc in order to obtain a greater reduction in dental caries. The study incolved three groups of rats receiving: a zinc silicofluoride - 1 ppm, b sodium fluoride - 1 ppm and c tap water. All groups included males and females, and were divided in sub-groups in accordance with cariogenic and non cariogenic diets. The data were treated by analysis of variance and the main conclusions obtained were the following: 1st The group of zinc silicofluoride has shown less caries than the sodium fluoride group, but the difference was not statistically significant. When both groups a and b were compared to group c, the results were significant. 2nd The rats receiving zinc silicofluoride or sodium fluoride have shown higher levels of fluorine in the bone ashes but the difference between them was not statistically significant. 3

  8. Tendências em séries anuais de precipitação e temperaturas no Brasil

    Directory of Open Access Journals (Sweden)

    Júlio César Penereiro

    Full Text Available RESUMO Nas últimas décadas, pesquisadores científicos e acadêmicos em todo o mundo têm se preocupado com a avaliação das tendências dos climas regional e global. A avaliação das alterações no clima é uma ferramenta para o planejamento da sociedade, pois permite considerar as possíveis consequências do aumento das temperaturas do ar e de mudanças no regime de precipitação que foram observadas ao redor do mundo. Sob a hipótese da presença de alterações climáticas no Brasil, o objetivo do presente estudo foi identificar a existência de tendências climáticas em 243 séries anuais de temperaturas máxima, mínima e média do ar (T-Máx., T-Mín. e T-Méd. e precipitação pluviométrica (Prec. em cidades do Brasil. Foram empregados os testes estatísticos de Mann-Kendall (M-K. e Pettitt (Pett. para avaliação de tendências significativas. Para a visualização espacial das tendências observadas, foram elaborados mapas. Os resultados estatísticos mostram que, de todas as cidades estudadas, foram observadas tendências positivas na T-máx. em 35% das séries, negativas em 1% e ausência de tendência em 64%. Para a T-Mín., foram observadas tendências positivas em 30% dos casos, negativas em 8% e ausência de tendência em 63%. Na T-Méd., tendência positiva foi detectada em 35% das cidades analisadas, negativa em 3% e ausência de tendência em 62%. Por fim, na Prec., tendência positiva em 6% dos casos, negativa em 4% e ausência de tendência em 91%. As tendências observadas no presente estudo estão possivelmente relacionadas às atividades antrópicas em cada localidade, como o expansionismo urbano, o desenvolvimento industrial e o adensamento populacional.

  9. Revisão das praticas pedagógicas dos professores da 1ª série a 4ª série do 1ºgrau da escola municipal "Ulisses de Góis" - Natal/RN

    Directory of Open Access Journals (Sweden)

    Marta Maria Araujo

    1989-06-01

    Full Text Available Este Projeto de Pesquisa, desenvolvido com os professores de 1ª à 4ª séries da escola "Ulisses de Góis" durante o ano de 1985, significou uma tentativa de trabalhar algumas constatações evidenciadas na Dissertação de Mestrado — "Formação do Educador no Curso de Pedagogia de Caicó — RN: Reprodução ou Transformação Social?" (Araújo, 1985. Dentre essas constatações destacadas no Curso de Pedagogia estudado, verificou-se que as práticas pedagógicas desenvolvidas pelos agentes educativos podem ser consideradas mais como um fator de reprodução do que de transformação social. Neste estudo, observou-se que a tendência de reprodução das práticas educativas seria reveladora de um compromisso com uma educação crítica, capaz de influenciar as transformações sociais.

  10. Effect of Plasma, RF, and RIE Treatments on Properties of Double-Sided High Voltage Solar Cells with Vertically Aligned p-n Junctions

    Directory of Open Access Journals (Sweden)

    Mykola O. Semenenko

    2016-01-01

    Full Text Available Si-based solar cells with vertically aligned p-n junctions operating at high voltage were designed and fabricated. The plasma treatments and antireflection coating deposition on the working surfaces of both single- and multijunction cells were made using the special holders. It was shown that additional treatment of solar cells in argon plasma prior to hydrogen plasma treatment and deposition of diamond-like carbon antireflection films led to the improvement of the cell efficiency by up to 60%. Radio frequency waves support plasma generation and improve photoelectric conversion mainly due to reduction of internal stresses at the interfaces. Application of reactive ion etching technique removes the broken layer, reduces elastic strain in the wafer, decreases recombination of charge carriers in the bulk, and provides cell efficiency increase by up to ten times.

  11. Reactivity of olefin and allyl ligands in π-complexes of metals

    International Nuclear Information System (INIS)

    Kukushkin, Yu.N.

    1987-01-01

    The data on reactivity of olefin and allyl ligands in transition metal (Ru, W) π-complexes, published up to 1984 are presented. Metal ion coordination of olefins causes their appreciable reactivity change. Transformations of π-olefin ligands into σ-alkyl ones, interaction of π-complexes with oxygen nucleophilic reagents, amines, halogenides and pseudohalogenides are considered

  12. Ion Colliders

    CERN Document Server

    Fischer, W

    2014-01-01

    High-energy ion colliders are large research tools in nuclear physics to study the Quark-Gluon-Plasma (QGP). The range of collision energy and high luminosity are important design and operational considerations. The experiments also expect flexibility with frequent changes in the collision energy, detector fields, and ion species. Ion species range from protons, including polarized protons in RHIC, to heavy nuclei like gold, lead and uranium. Asymmetric collision combinations (e.g. protons against heavy ions) are also essential. For the creation, acceleration, and storage of bright intense ion beams, limits are set by space charge, charge change, and intrabeam scattering effects, as well as beam losses due to a variety of other phenomena. Currently, there are two operating ion colliders, the Relativistic Heavy Ion Collider (RHIC) at BNL, and the Large Hadron Collider (LHC) at CERN.

  13. Recoil ions

    International Nuclear Information System (INIS)

    Cocke, C.L.; Olson, R.E.

    1991-01-01

    The collision of a fast moving heavy ion with a neutral atomic target can produce very highly charged but slowly moving target ions. This article reviews experimental and theoretical work on the production and use of recoil ions beyond the second ionization state by beams with specific energies above 0.5 MeV/amu. A brief historical survey is followed by a discussion of theoretical approaches to the problem of the removal of many electrons from a neutral target by a rapid, multiply charged projectile. A discussion of experimental techniques and results for total and differential cross sections for multiple ionization of atomic and molecular targets is given. Measurements of recoil energy are discussed. The uses of recoil ions for in situ spectroscopy of multiply charged ions, for external beams of slow, highly charged ions and in ion traps are reviewed. Some possible future opportunities are discussed. (orig.)

  14. Gas phase ion/molecule reactions as studied by Fourier Transform Ion Cyclotron Resonance mass spectrometry

    International Nuclear Information System (INIS)

    Joergensen, S.I.

    1985-01-01

    The subject of this thesis is gas phase ion/molecule reactions as studied by Fourier Transform Ion Cyclotron Resonance (FT-ICR) mass spectrometry (chapter 2 contains a short description of this method). Three chapters are mainly concerned with mechanistic aspects of gas phase ion/molecule reactions. An equally important aspect of the thesis is the stability and reactivity of α-thio carbanions, dipole stabilized carbanions and homoenolate anions, dealt with in the other four chapters. (Auth.)

  15. A construção da imagem de uma personagem histórica nas minisséries televisivas

    Directory of Open Access Journals (Sweden)

    Machado, Michelli

    2010-01-01

    Full Text Available O artigo busca fazer algumas considerações sobre a midiatização da narrativa histórica em minisséries, a partir de uma análise da construção ficcional de personagens históricas feita pela televisão. A figura da Princesa Isabel nas minisséries Abolição e República apresenta-se como cenário para essa análise de personagens reais apresentadas por releituras contemporâneas da história. Autores como Coutinho, Martín-Barbero e Rey nos ajudaram entender a metodologia audiovisual de análise da imagem e servirão de base teórica para a construção do exercício proposto nesse texto

  16. A barbárie da cultura: a dimensão pré-trágica de hugo mãe segundo Verlaine Freitas

    Directory of Open Access Journals (Sweden)

    Pedro Duarte

    2016-12-01

    Full Text Available Na leitura feita por Verlaine Freitas do romance o remorso de baltazar serapião, de valter hugo mãe, os personagens são designados como pré-trágicos. Para ele, a tragédia seria a etapa de passagem (ali faltosa da barbárie à civilização. Sugiro neste artigo que, tomando por base essa leitura, o problema em jogo no romance de hugo mãe é menos a oposição entre barbárie e civilização do que o nó que enlaça cada uma das diferentes cordas aí tensionadas: a cultura e a natureza.

  17. Atividade de lesões de cárie não cavitadas : fatores associados e critérios de avaliação

    OpenAIRE

    Renata Schlesner de Oliveira

    2013-01-01

    O objetivo geral desta pesquisa foi avaliar fatores associados à atividade de lesões de cárie não cavitadas, bem como, critérios para a sua avaliação em superfícies oclusais de molares permanentes. Para isso, dois estudos foram conduzidos. O primeiro estudo teve como objetivos: (1) avaliar a efetividade de um tratamento para pacientes com lesões de cárie em molares em diferentes estágios de erupção e (2) avaliar se o estágio de erupção e o acúmulo de biofilme estão associados à atividade de l...

  18. TESTES ESTATISTICOS DE ESTACIONARIEDADE NO VALOR ESPERADO PARA SÉRIES TEMPORAIS COM DEPENDÊNCIA TEMPORAL SENSÍVEIS A MUDANÇAS GRADUAIS OU ABRUPTAS

    Directory of Open Access Journals (Sweden)

    Jorge Machado Damázio

    2014-08-01

    Full Text Available 10.12957/cadest.2011.15729O artigo apresenta o desenvolvimento de testes estatísticos de verificação de estacionariedade no valor esperado para séries temporais com estrutura de dependência temporal com vistas a distinguir flutuações naturais de mudanças de valor esperado suaves ou abruptas. Os testes são aplicados à série de 75 anos de afluências anuais ao aproveitamento hidroelétrico de São Luiz do Tapajós fornecida pelos estudos hidrológicos dos Estudos de Inventário da Bacia dos Rios Tapajós e Jimanxim, localizadas na região Amazônica

  19. Les déterminants du chômage en Algérie : une analyse économétrique (1980-2009)

    OpenAIRE

    BOURICHE, Lahcène

    2013-01-01

    Cette étude montre l’existence une relation de cointégration au sens d’Engel et Granger, entre le taux de chômage et certaines variables d’ordre économiques et financières liées aux réformes économiques engagées en Algérie depuis la fin des années 80. Ces variables sont entre autres, les dépenses nationales brutes, le taux d’inflation, le taux de change et les termes de l’échange. Toutefois, il ressort de l’étude, que le taux de chômage en Algérie n’est pas corrélé avec la productivité du tra...

  20. Immune reactivities against gums.

    Science.gov (United States)

    Vojdani, Aristo; Vojdani, Charlene

    2015-01-01

    Different kinds of gums from various sources enjoy an extremely broad range of commercial and industrial use, from food and pharmaceuticals to printing and adhesives. Although generally recognized as safe by the US Food and Drug Administration (FDA), gums have a history of association with sensitive or allergic reactions. In addition, studies have shown that gums have a structural, molecular similarity to a number of common foods. A possibility exists for cross-reactivity. Due to the widespread use of gums in almost every aspect of modern life, the overall goal of the current investigation was to determine the degree of immune reactivity to various gum antigens in the sera of individuals representing the general population. The study was a randomized, controlled trial. 288 sera purchased from a commercial source. The sera was screened for immunoglobulin G (IgG) and immunoglobulin E (IgE) antibodies against extracts of mastic gum, carrageenan, xantham gum, guar gum, gum tragacanth, locust bean gum, and β-glucan, using indirect enzyme-linked immunosorbent assay (ELISA) testing. For each gum antigen, inhibition testing was performed on the 4 sera that showed the highest IgG and IgE immune reactivity against the different gums used in the study. Inhibition testing on these same sera for sesame albumin, lentil, corn, rice, pineapple, peanut, pea protein, shrimp, or kidney bean was used to determine the cross-reactivity of these foods with the gum. Of the 288 samples, 4.2%-27% of the specimens showed a significant elevation in IgG antibodies against various gums. Only 4 of 288, or 1.4%, showed a simultaneous elevation of the IgG antibody against all 7 gum extracts. For the IgE antibody, 15.6%-29.1% of the specimens showed an elevation against the various gums. A significant percentage of the specimens, 12.8%, simultaneously produced IgE antibodies against all 7 tested extracts. Overall, the percentage of elevation in IgE antibodies against different gum extracts, with

  1. Covalent functionalization of graphene with reactive intermediates.

    Science.gov (United States)

    Park, Jaehyeung; Yan, Mingdi

    2013-01-15

    Graphene, a material made exclusively of sp(2) carbon atoms with its π electrons delocalized over the entire 2D network, is somewhat chemically inert. Covalent functionalization can enhance graphene's properties including opening its band gap, tuning conductivity, and improving solubility and stability. Covalent functionalization of pristine graphene typically requires reactive species that can form covalent adducts with the sp(2) carbon structures in graphene. In this Account, we describe graphene functionalization reactions using reactive intermediates of radicals, nitrenes, carbenes, and arynes. These reactive species covalently modify graphene through free radical addition, CH insertion, or cycloaddition reactions. Free radical additions are among the most common reaction, and these radicals can be generated from diazonium salts and benzoyl peroxide. Electron transfer from graphene to aryl diazonium ion or photoactivation of benzoyl peroxide yields aryl radicals that subsequently add to graphene to form covalent adducts. Nitrenes, electron-deficient species generated by thermal or photochemical activation of organic azides, can functionalize graphene very efficiently. Because perfluorophenyl nitrenes show enhanced bimolecular reactions compared with alkyl or phenyl nitrenes, perfluorophenyl azides are especially effective. Carbenes are used less frequently than nitrenes, but they undergo CH insertion and C═C cycloaddition reactions with graphene. In addition, arynes can serve as a dienophile in a Diels-Alder type reaction with graphene. Further study is needed to understand and exploit the chemistry of graphene. The generation of highly reactive intermediates in these reactions leads to side products that complicate the product composition and analysis. Fundamental questions remain about the reactivity and regioselectivity of graphene. The differences in the basal plane and the undercoordinated edges of graphene and the zigzag versus arm-chair configurations

  2. The science of dynamic compression at the mesoscale and the Matter-Radiation Interactions in Extremes (MaRIE) project

    International Nuclear Information System (INIS)

    Barnes, Cris W; Funk, David J; Hockaday, Mary P; Sarrao, John L; Stevens, Michael F

    2014-01-01

    A scientific transition is underway from traditional observation and validation of materials properties to a new paradigm where scientists and engineers design and create materials with tailored properties for specified functionality. Of particular interest are the regimes of materials' response to thermo-mechanical extremes including materials deforming under imposed strain rates above the quasi-static range (i.e. > 10 −3 s −1 ), material subjected to imposed shocks, but also material response to static, high-pressures. There is a need for the study of materials at the 'mesoscale', the scale at which sub-granular physical processes and inter-granular organization couple to determine microstructure, crucially impacting constitutive response at the engineering macroscale. For these reasons Los Alamos is proposing the MaRIE facility as a National User Facility to meet this need. In particular, three key science challenges will be identified: Link material microstructure to macroscopic behavior under dynamic deformation conditions; Make the transition from observation and validation to prediction and control of dynamic processes; and Develop the next generation of diagnostics, dynamic drivers, and predictive models to enable the necessary, transformative research.

  3. Kinetics of Materials at Extreme Conditions: Understanding the Time Dependent Approach to Equilibrium at MaRIE

    Energy Technology Data Exchange (ETDEWEB)

    Kraus, R. G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mcnabb, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kumar, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Eggert, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Borg, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Cerreta, E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dattelbaum, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Fried, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Greeff, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Stolken, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-04-21

    The National Nuclear Security Agency has recently recognized that a long-term need exists to establish a stronger scientific basis for the assessment and qualification of materials and manufacturing processes for the nuclear stockpile and other national security applications. These materials may have undergone substantial changes with age, or may represent new materials that are being introduced because of difficulties associated with reusing or recreating materials used in original stockpile components. Also, with advancements in manufacturing methods, the NNSA anticipates opportunities for an enhanced range of control over fabricated components, an enhanced pace of materials development, and enhanced functionality. The development of qualification standards for these new materials will require the ability to understand and control material characteristics that affect both mechanical and dynamic performance. A unique aspect for NNSA is that the performance requirements for materials are often set by system hydrodynamics, and these materials must perform in extreme environments and loading conditions. Thus, the scientific motivation is to understand “Matter-Radiation Interactions in Extremes (MaRIE).”

  4. Sieviešu un vīriešu priekšvārdi Somijā

    OpenAIRE

    Felss, Vita

    2011-01-01

    Bakalaura darba „ Sieviešu un vīriešu priekšvārdi Somijā ” mērķis ir sniegt pēc iespējas plašāku informāciju latviešu valodā par mūsdienu kalendārā sastopamiem priekšvārdiem Somijā, to nozīmi, vēsturisko attīstību, populārākajiem vārdiem pēdējās trīs desmitgadēs. Bakalaura darba autore pēc saviem ieskatiem izvēlētos priekšvārdus ir izpētījusi no etimoloģijas, vēstures un psiholoģijas aspekta. Bakalaura darbs sastāv no 70 lappusēm, 5 pielikumiem, kas sastāda 14 lappuses. Teorētiskajā daļā tiek...

  5. Disfagia orofaríngea na Síndrome de Wallenberg - série de casos

    Directory of Open Access Journals (Sweden)

    Diego Fernando Dorneles Bilheri

    Full Text Available RESUMO: Objetivo: caracterizar o quadro de comprometimento da função da deglutição em pacientes com Síndrome de Wallenberg. Métodos: série de casos de sete pacientes, com diagnóstico dessa síndrome, encaminhados para avaliação fonoaudiológica. Para avaliação do grau de disfagia utilizou-se a escala Gugging Swallowing Screen e para avaliar o nível de ingestão oral utilizou-se a Functional Oral Intake Scale. Resultados: a média de idade foi de 60,57 anos; todos os sujeitos apresentaram alteração na função da deglutição de grau grave (71,42% a moderado (28,58%; 85,71% necessitaram de Via Alternativa de Alimentação, sendo que, 71,43% eram alimentados exclusivamente por sonda nasoentérica; todos necessitaram de acompanhamento fonoaudiológico. Conclusão: este estudo concluiu que a disfagia orofaríngea na Síndrome de Wallenberg apresenta-se como um distúrbio de grau grave a moderado, sendo necessária a utilização de Via Alternativa de Alimentação na maioria dos casos.

  6. Étude phénotypique de la résistance des bactéries isolées des eaux ...

    African Journals Online (AJOL)

    SARAH

    30 nov. 2017 ... maladies avec des risques élevés lorsque les bactéries sont résistantes aux antibiotiques. (Servais and Passerat 2009). Les eaux de surface sont les réceptacles des eaux usées aussi bien industrielles, agricoles, hospitalières que domestiques. Ces eaux de surface polluées, dans certains pays peuvent ...

  7. Trabalho e rendimentos na nova série do sistema de contas nacionais Labor and incomes on new series of Brazilian national account

    Directory of Open Access Journals (Sweden)

    João Hallak Neto

    2008-12-01

    Full Text Available Este artigo tem como objetivo comparar os resultados do fator trabalho e dos rendimentos a ele associados entre as séries antiga e nova do SCN do Brasil. Assim, foram apresentados os principais aspectos conceituais e metodológicos e as diferenças existentes na construção e nos resultados obtidos pelas duas séries do SCN. Para avaliar os novos resultados, eles foram comparados com os dados de outras bases estatísticas freqüentemente utilizadas nos estudos relativos ao mercado de trabalho: PNAD, POF e Rais. O confronto dos resultados do SCN com os das bases selecionadas ratificaram a conclusão de que essas variáveis estão mais bem mensuradas na nova série do SCN, e que se encontravam subestimadas nos anos finais da série antiga.The objective of this article is to compare the results of labour factor and its associated income between the previous and the new series of the Brazilian SCN. Therefore, the main conceptual and methodological aspects and the existing differences in development and in the results of the two SCN series were presented. To evaluate the new results, they were compared to other statistical databases usually referred to in most labour market studies. The SCN results compared to PNAD, POF and Rais proved that these variables are more reliable in the new SCN series and that they were subestimated in the last years of the previous series.

  8. L'Algérie, intégration de l'évaluation citoyenne comme maîtrise d ...

    African Journals Online (AJOL)

    L'objectif étant de tenir compte tenu de la mobilisation des populations riveraines qui luttent quotidiennement contre les risques sanitaires nocifs pour leur santé et leur sécurité. Mots-clés : Ressources naturelles – préservation - évaluation citoyenne - Algérie. Algeria, integration of citizen evaluation as a mastery of creative ...

  9. Etude des bactéries acétiques isolées de raisins et de vins - I.- Identification de souches isolées

    Directory of Open Access Journals (Sweden)

    A.C. BLACKWOOD

    1969-09-01

    Monsieur PEYNAUD nous a confié l'isolement et l'identification des bactéries acétiques prélevées à la dernière récolte sur les raisins plus ou moins pourris de différents vignobles du Bordelais. Le but était de connaître la microflore acétique des raisins et de la comparer à celle des vins.

  10. Ion-molecule reactions in alkynes

    International Nuclear Information System (INIS)

    Lifshitz, C.; Weiss, M.

    1980-01-01

    Fragment ions from 1,5-hexadiyne are trapped in an electron space charge and allowed to react with the neutral 1,5-hexadiyne present. The reactivities are similar to those of ions of the same elementary formulae in the benzene system. Secondary ions of major abundance observed are, in decreasing order of importance: C 10 H + 8 , C 9 H + 7 , C 12 H + 8 , C 12 H + 9 and C 7 H + 7 . In contrast to the benzene system, the ion C 12 H + 11 is of minor importance. (orig.)

  11. Validade da autopercepção da presença de cárie dentária como teste diagnóstico e fatores associados entre adultos

    OpenAIRE

    Haikal, Desirée Sant’Ana; Roberto, Luana Leal; Martins, Andréa Maria Eleutério de Barros Lima; Paula, Alfredo Maurício Batista de; Ferreira, Efigênia Ferreira e

    2017-01-01

    Resumo: Objetivou-se investigar a validade da autopercepção da presença da cárie dentária e fatores associados, mediante estudo com 795 adultos (35-44 anos). A variável dependente foi autopercepção da presença da cárie dentária, as independentes reunidas em blocos. Três modelos logísticos foram conduzidos: (1) todos os adultos; (2) adultos com lesões de cárie normativa; e (3) adultos sem tais lesões. A autopercepção da presença da cárie dentária apresentou sensibilidade de 77,7%, especificida...

  12. What makes ecological systems reactive?

    Science.gov (United States)

    Snyder, Robin E

    2010-06-01

    Although perturbations from a stable equilibrium must ultimately vanish, they can grow initially, and the maximum initial growth rate is called reactivity. Reactivity thus identifies systems that may undergo transient population surges or drops in response to perturbations; however, we lack biological and mathematical intuition about what makes a system reactive. This paper presents upper and lower bounds on reactivity for an arbitrary linearized model, explores their strictness, and discusses their biological implications. I find that less stable systems (i.e. systems with long transients) have a smaller possible range of reactivities for which no perturbations grow. Systems with more species have a higher capacity to be reactive, assuming species interactions do not weaken too rapidly as the number of species increases. Finally, I find that in discrete time, reactivity is determined largely by mean interaction strength and neither discrete nor continuous time reactivity are sensitive to food web topology. 2010 Elsevier Inc. All rights reserved.

  13. Evidence of the impacting body of the Ries crater - the discovery of Fe-Cr-Ni veinlets below the crater bottom

    Science.gov (United States)

    El, Goresy A.; Chao, E.C.T.

    1976-01-01

    Fe-Cr-Ni particles and veinlets have been discovered in the top 15 m of the compressed zone with abundant shatter cones below the bottom of the Ries crater. The metallic particles are less than a few microns across. They occur in various minerals along healed intergranular and locally in intragranular microfractures in quartz diorite, amphibolite and chloritized granite of the basement crystalline rocks. The particles consist of major Fe, Cr, and Ni with minor Si and Ca. Origin due to contamination is absolutely ruled out. We believe that these Fe-Cr-Ni particles are probably condensed from the vaporized impacting body which produced the Ries crater. These particles were injected with high velocity into microfractures near the top of the compressed zone, implanted in and across various minerals before these microfractures were resealed. The presence of Si and Ca as well as the fact that the Cr content is nearly twice that of Ni, led us to conclude that the Ries impacting body is very likely not an iron meteorite but a stony meteorite. ?? 1976.

  14. AJUSTE DE MODELO LINEAR DE TENDÊNCIA E PREVISÃO PARA SÉRIES DE PRODUÇÃO DE LEITE

    Directory of Open Access Journals (Sweden)

    Matheus Silva de Oliveira

    2017-04-01

    Full Text Available Utilizou-se a metodologia de séries temporais aplicada à série anual de produção de leite presente na Pesquisa Pecuária Municipal (PPM do Instituto Brasileiro de Geografia e Estatística (IBGE, no período de 1974 a 2014, com o objetivo de ajustar um modelo de tendência e previsão para o Brasil, a região Sudeste e o estado do Espírito Santo. Os modelos ajustados para as três séries de dados apresentaram coeficiente de determinação entre 90% e 97%, a tendência encontrada foi linear e crescente e a previsão mostra continuidade desta tendência de crescimento na produção. Pode-se inferir que os modelos obtidos são adequados para indicar a tendência e previsão dos dados nas três regiões em estudo.

  15. Bearing for the reactivation

    International Nuclear Information System (INIS)

    Santamaria Alexandra

    2003-01-01

    Ecopetrol undertook an aggressive plan to reactivate the activities of seismic that allows fulfilling the goals proposed for this year (2003). Although the production registered a descent of 9%, the financial results throw utilities for $1.1 trillion pesos to the closing of September and contributions in bonuses for $1.2 trillions. The author also refers to the general balance, to the finances, raw production, taxes and transfers

  16. Ion colliders

    International Nuclear Information System (INIS)

    Fischer, W.

    2010-01-01

    Ion colliders are research tools for high-energy nuclear physics, and are used to test the theory of Quantum Chromo Dynamics (QCD). The collisions of fully stripped high-energy ions create matter of a temperature and density that existed only microseconds after the Big Bang. Ion colliders can reach higher densities and temperatures than fixed target experiments although at a much lower luminosity. The first ion collider was the CERN Intersecting Storage Ring (ISR), which collided light ions (77Asb1, 81Bou1). The BNL Relativistic Heavy Ion Collider (RHIC) is in operation since 2000 and has collided a number of species at numerous energies. The CERN Large Hadron Collider (LHC) started the heavy ion program in 2010. Table 1 shows all previous and the currently planned running modes for ISR, RHIC, and LHC. All three machines also collide protons, which are spin-polarized in RHIC. Ion colliders differ from proton or antiproton colliders in a number of ways: the preparation of the ions in the source and the pre-injector chain is limited by other effects than for protons; frequent changes in the collision energy and particle species, including asymmetric species, are typical; and the interaction of ions with each other and accelerator components is different from protons, which has implications for collision products, collimation, the beam dump, and intercepting instrumentation devices such a profile monitors. In the preparation for the collider use the charge state Z of the ions is successively increased to minimize the effects of space charge, intrabeam scattering (IBS), charge change effects (electron capture and stripping), and ion-impact desorption after beam loss. Low charge states reduce space charge, intrabeam scattering, and electron capture effects. High charge states reduce electron stripping, and make bending and acceleration more effective. Electron stripping at higher energies is generally more efficient. Table 2 shows the charge states and energies in the

  17. Ion colliders

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, W.

    2011-12-01

    Ion colliders are research tools for high-energy nuclear physics, and are used to test the theory of Quantum Chromo Dynamics (QCD). The collisions of fully stripped high-energy ions create matter of a temperature and density that existed only microseconds after the Big Bang. Ion colliders can reach higher densities and temperatures than fixed target experiments although at a much lower luminosity. The first ion collider was the CERN Intersecting Storage Ring (ISR), which collided light ions [77Asb1, 81Bou1]. The BNL Relativistic Heavy Ion Collider (RHIC) is in operation since 2000 and has collided a number of species at numerous energies. The CERN Large Hadron Collider (LHC) started the heavy ion program in 2010. Table 1 shows all previous and the currently planned running modes for ISR, RHIC, and LHC. All three machines also collide protons, which are spin-polarized in RHIC. Ion colliders differ from proton or antiproton colliders in a number of ways: the preparation of the ions in the source and the pre-injector chain is limited by other effects than for protons; frequent changes in the collision energy and particle species, including asymmetric species, are typical; and the interaction of ions with each other and accelerator components is different from protons, which has implications for collision products, collimation, the beam dump, and intercepting instrumentation devices such a profile monitors. In the preparation for the collider use the charge state Z of the ions is successively increased to minimize the effects of space charge, intrabeam scattering (IBS), charge change effects (electron capture and stripping), and ion-impact desorption after beam loss. Low charge states reduce space charge, intrabeam scattering, and electron capture effects. High charge states reduce electron stripping, and make bending and acceleration more effective. Electron stripping at higher energies is generally more efficient. Table 2 shows the charge states and energies in the

  18. Re-Validation of the Van Rie HIV/AIDS-Related Stigma Scale for Use with People Living with HIV in the United States

    Science.gov (United States)

    Kipp, Aaron M.; Audet, Carolyn M.; Earnshaw, Valerie A.; Owens, Jared; McGowan, Catherine C.; Wallston, Kenneth A.

    2015-01-01

    There is little consensus about which of the many validated human immunodeficiency virus (HIV) stigma scales should be regularly used, with few being re-validated in different contexts or evaluated for how they compare to other, existing HIV stigma scales. The purpose of this exploratory study was to re-validate the Van Rie HIV/AIDS-Related Stigma Scale, originally validated in Thailand and using a third-person wording structure, for use with people living with HIV in the United States. Adult HIV clinic patients completed a survey including the Berger and Van Rie scales, and measures of social support and depression. Eighty-five of 211 (40%) eligible participants provided data for both stigma scales. Exploratory factor analyses identified three factors to the Van Rie scale: Loss of Social Relationships (new subscale), Managing HIV Concealment (new subscale), and Perceived Community Stigma (original subscale). These subscales were moderately inter-related (r = 0.51 to 0.58) with acceptable to excellent reliability (Cronbach’s alpha = 0.69 to 0.90). The Van Rie subscales were also moderately inter-correlated with the Berger subscales (r = 0.44 to 0.76), had similar construct validity, and tended to have higher mean stigma scores when compared with Berger subscales that were conceptually most similar. The revised Van Rie HIV-related Stigma Scale demonstrates good validity and internal consistency, offering a valid measure of HIV stigma with a three-factor structure. The third-person wording may be particularly suitable for measuring stigmatizing attitudes during an individual’s transition from at-risk and undergoing HIV testing to newly diagnosed, a time when experiences of discrimination and processing issues of disclosure have not yet occurred. The stigma mechanisms for individuals making this transition have not been well explored. These scenarios, combined with the observed non-response to the Berger Enacted Stigma subscale items (a surprise finding

  19. A gravidade da cárie está associada à desnutrição proteico-calórica em pré-escolares?

    Directory of Open Access Journals (Sweden)

    Cecilia Claudia Costa Ribeiro

    2014-03-01

    Full Text Available Avaliou-se se gravidade da cárie está associada à desnutrição proteico-calórica em pré-escolares. Foi realizado um estudo seccional aninhado a uma coorte retrospectiva de 625 crianças entre 24 -71 meses, em São Luís, Maranhão. Um modelo hierarquizado foi avaliado em cinco níveis: 1º Variáveis socioeconômicas (classe econômica, escolaridade materna, cor da pele; 2º Variáveis de acesso; 3º Baixo peso ao nascer e amamentação exclusiva; 4º Peso para altura aos 12 meses e 5º Gravidade da cárie e níveis de albumina (Alb. O desfecho foi desnutrição proteico-calórica (z escore altura para idade < -2. A prevalência do desfecho foi de 5,0 %, e da cárie foi de 32%. As variáveis do primeiro nível não foram associadas ao desfecho, porém a classe econômica foi mantida até o modelo final. As variáveis do segundo e do terceiro níveis não foram significativas. No quarto nível, peso para altura aos 12 meses não foi significativo, porém foi mantido até o modelo final. No último nível, os níveis de Alb não foram associados ao desfecho e a gravidade da doença cárie foi positivamente associada com desnutrição proteico-calórica em pré-escolares. A associação da gravidade da cárie com déficit antropométrico sinaliza que a saúde bucal deva ser parte importante nas políticas públicas de atenção à infância.

  20. Programming Reactive Extensions and LINQ

    CERN Document Server

    Liberty, Jesse

    2011-01-01

    Pro Reactive Extensions and LINQ is a deep dive into the next important technology for .NET developers: Reactive Extensions. This in-depth tutorial goes beyond what is available anywhere else to teach how to write WPF, Silverlight, and Windows Phone applications using the Reactive Extensions (Rx) to handle events and asynchronous method calls. Reactive programming allows you to turn those aspects of your code that are currently imperative into something much more event-driven and flexible. For this reason, it's sometimes referred to as LINQ for Events. Reactive programming hinges on the concep

  1. Recent changes in anthropogenic reactive nitrogen compounds

    Science.gov (United States)

    Andronache, Constantin

    2014-05-01

    Significant anthropogenic perturbations of the nitrogen cycle are the result of rapid population growth, with mounting need for food and energy production. The increase of reactive nitrogen compounds (such as NOx, HNO3, NH3, and N2O) has a significant impact on human health, environment, and climate. NOx emissions contribute to O3 chemistry, aerosol formation and acidic precipitation. Ammonia is a notable atmospheric pollutant that may deteriorate ecosystems and contribute to respiratory problems. It reacts with acidic gases to form aerosols or is deposited back to ecosystems. The application of fertilizers accounts for most of the N2O production, adding to greenhouse gas emissions. We analyze the change of some reactive nitrogen compounds based on observations, in eastern United States. Results show that the control of NOx and SO2 emissions over the last decades caused a significant decrease of acidic deposition. The nitrate deposition is highest in eastern US, while the ammonium ion concentration is highest in central US regions. Overall, the inorganic nitrogen wet deposition from nitrate and ammonium is enhanced in central, and eastern US. Research shows that sensitive ecosystems in northeastern regions exhibit a slow recovery from the accumulated effects of acidic deposition. Given the growing demand for nitrogen in agriculture and industry, we discuss possible pathways to reduce the impact of excess reactive nitrogen on the environment.

  2. Respostas cardiovasculares ao exercício resistido são afetadas pela carga e intervalos entre séries

    Directory of Open Access Journals (Sweden)

    Antonio Gil Castinheiras-Neto

    2010-10-01

    Full Text Available FUNDAMENTO: O controle das respostas cardiovasculares durante exercício resistido (ER é importante para a segurança do paciente. OBJETIVO: Investigar a influência do número de repetições máximas (RM e dos intervalos de recuperação entre séries (IR sobre a frequência cardíaca (FC, pressão arterial sistólica (PAS e duplo produto (DP durante ER. MÉTODOS: Vinte sujeitos saudáveis (26 ± 5 anos realizaram protocolos de ER envolvendo três séries do leg press (6 e 12 RM e IR proporcional ao tempo de contração (1:3 e 1:5. Aferiu-se a FC continuamente com cardiofrequencímetro e a PAS foi verificada ao final das séries, por meio de protocolo validado com método auscultatório. RESULTADOS: A FC sofreu influência da carga (p = 0,008 e das séries (p < 0,001, mas não do IR (p = 0,087. A PAS sofreu efeito isolado do número de séries (p < 0,001 e do IR (p = 0,017, mas não da carga (p = 0,95. O DP elevou-se em relação direta com a carga (p = 0,036 e com as séries (p < 0,001, mas inversamente ao IR (p = 0,006. Nos protocolos de 6 RM, a variação da FC foi maior para IR = 1:3 (Δ = 11,2 ± 1,1 bpm do que para IR = 1:5 (Δ = 4,5 ± 0,2 bpm; p = 0,002, mas não houve diferença para 12 RM (Δ 1:3 = 21,1 ± 2,2 bpm; Δ 1:5 = 18,9 ± 2,0 bpm, p = 0,83. O IR influenciou a variação da PAS em todas as cargas (6 RM - Δ 1:3 = 10,6 ± 0,9 mmHg, Δ 1:5 = 6,6 ± 0,7 mmHg; p = 0,02 e 12 RM - Δ 1:3 = 15,2 ± 1,1 mmHg, Δ 1:5 = 8,4 ± 0,7 mmHg; p = 0,04. O DP elevou-se proporcionalmente à carga (p = 0,036 e para séries (p < 0,001, mas inversamente ao IR (p = 0,006. Com IR = 1:3, houve diferença de DP para 6 RM (Δ = 2.892 ± 189 mmHg.bpm e 12 RM (Δ = 4.587 ± 300 mmHg.bpm; p = 0,018, mas não com IR = 1:5 (6 RM: Δ = 1.224 ± 141 mmHg.bpm, 12 RM: Δ = 2.332 ± 194 mmHg.bpm; p = 0,58. CONCLUSÃO: Independentemente da carga, um maior IR associou-se a menores respostas cardiovasculares durante ER, especialmente de PAS.

  3. Efeitos do alongamento passivo no desempenho de séries múltiplas no treinamento de força

    Directory of Open Access Journals (Sweden)

    Charles Ricardo Lopes

    2015-06-01

    Full Text Available INTRODUÇÃO: Recentemente, a prática de exercícios de alongamento tem sido relacionada a déficit no desempenho de atividades força-dependentes. Entretanto, pouco se sabe sobre seu efeito ao longo de séries múltiplas no treinamento de força. OBJETIVO: Determinar o efeito do alongamento passivo extensivo no desempenho de séries múltiplas e da dor percebida no treinamento de força. MÉTODOS: A amostra foi composta de 12 homens experientes com treinamento de força. O protocolo consistiu de três sessões. A primeira serviu como familiarização e determinação de 10 repetições máximas no supino reto (T10RM. A segunda e terceira condições foram aleatorizadas entre os sujeitos, sendo uma realizada com a avaliação do supino reto (SR sem alongamento prévio (SEMA, e a outra com alongamento prévio (COMA. O protocolo de alongamento consistiu de seis séries de 45 seg de alongamento por 15 seg de intervalo visando o músculo peitoral maior. A intensidade do alongamento foi mantida entre 70 e 90% da percepção subjetiva de desconforto. Antes e após o exercício, a dor local foi avaliada por meio de breve alongamento e palpação. A Análise de Variância ANOVA (2x6 com medidas repetidas foi utilizada para comparar o número de repetições. One-way ANOVA foi utilizada para comparar a carga da primeira série de cada condição (T10RM/SEMA/COMA. O teste-t de Student foi utilizado para comparar a carga total com a dor. RESULTADOS: Observou-se decréscimo no número de repetições ao longo das séries em ambas as condições, sem diferenças entre as mesmas, para a carga da primeira série, a carga total e a dor. CONCLUSÃO: O número de repetições em séries múltiplas é diminuído na mesma magnitude com e sem a realização do alongamento prévio, além de não alterar a carga total e a dor percebida.

  4. Reactivity costs in MARIA reactor

    International Nuclear Information System (INIS)

    Marcinkowska, Zuzanna E.; Pytel, Krzysztof M.; Frydrysiak, Andrzej

    2017-01-01

    Highlights: • The methodology for calculating consumed fuel cost of excess reactivity is proposed. • Correlation between time integral of the core excess reactivity and released energy. • Reactivity price gives number of fuel elements required for given excess reactivity. - Abstract: For the reactor operation at high power level and carrying out experiments and irradiations the major cost of reactor operation is the expense of nuclear fuel. In this paper the methodology for calculating consumed fuel cost-relatedness of excess reactivity is proposed. Reactivity costs have been determined on the basis of operating data. A number of examples of calculating the reactivity costs for processes such as: strong absorbing material irradiation, molybdenium-99 production, beryllium matrix poisoning and increased moderator temperature illustrates proposed method.

  5. Reactivity insertion accident analysis

    International Nuclear Information System (INIS)

    Moreira, J.M.L.; Nakata, H.; Yorihaz, H.

    1990-04-01

    The correct prediction of postulated accidents is the fundamental requirement for the reactor licensing procedures. Accident sequences and severity of their consequences depend upon the analysis which rely on analytical tools which must be validated against known experimental results. Present work presents a systematic approach to analyse and estimate the reactivity insertion accident sequences. The methodology is based on the CINETHICA code which solves the point-kinetics/thermohydraulic coupled equations with weighted temperature feedback. Comparison against SPERT experimental results shows good agreement for the step insertion accidents. (author) [pt

  6. ion irradiation

    Indian Academy of Sciences (India)

    Swift heavy ions interact predominantly through inelastic scattering while traversing any polymer medium and produce excited/ionized atoms. Here samples of the polycarbonate Makrofol of approximate thickness 20 m, spin coated on GaAs substrate were irradiated with 50 MeV Li ion (+3 charge state). Build-in ...

  7. Ion microprobes

    International Nuclear Information System (INIS)

    Coles, J.N.; Long, J.V.P.

    1977-01-01

    An ion microprobe is described that has an ion extraction arrangement comprising two separate paths for ions and electrons diverging from a common point. A cone shaped or pyramidal guard electrode surrounds each path the apex angles being equal and coinciding with the said point. The guard electrodes are positioned to lie tangentially to each other and to a planar surface including the said point. An aperture is provided for the two paths at the apexes of both guard electrodes, and electrical connections between the guard electrodes enable the same potential to be applied to both guard electrodes. Means are provided for generating oppositely polarised electric fields within the guard electrodes, together with means for causing a focused ion beam to strike the common point without suffering astigmatism. The means for causing a focused ion beam to strike the said point includes an ion gun for directing an ion beam along one of the paths and means to provide an axial accelerating field there along. Optical viewing means are also provided. Existing designs enable only ions or electrons, but not both, to be extracted at any one time. (U.K.)

  8. Geologic implications of the Apollo 14 Fra Mauro breccias and comparison with ejecta from the Ries Crater, Germany

    Science.gov (United States)

    Chao, E.C.T.

    1973-01-01

    On the basis of petrographic and laboratory and active seismic data for the Fra Mauro breccias, and by comparison with the nature and distribution of the ejecta from the Ries crater, Germany, some tentative conclusions regarding the geologic significance of the Fra Mauro Formation on the moon can be drawn. The Fra Mauro Formation, as a whole, consists of unwcldcd, porous ejecta, slightly less porous than the regolith. It contains hand-specimen and larger size clasts of strongly annealed complex breccias, partly to slightly annealed breccias, basalts, and perhaps spherule-rich breccias. These clasts are embedded in a matrix of porous aggregate dominated by mineral and breccia fragments and probably largely free of undevitrified glass. All strongly annealed hand-specimen-size breccias are clasts in the Fra Mauro Formation. To account for the porous, unwelded state of the Fra Mauro Formation, the ejecta must have been deposited at a temperature below that required for welding and annealing. Large boulders probably compacted by the Cone crater event occur near the rim of the crater. They probably consist of a similar suite of fragments, but are probably less porous than the formation. The geochronologic clocks of fragments in the Fra Mauro Formation, with textures ranging from unannealed to strongly annealed, were not reset or strongly modified by the Imbrian event. Strongly annealed breccia clasts and basalt clasts are pre-Imbrian, and probably existed as ejecta mixed with basalt flows in the Imbrium Basin prior to the Imbrian event. The Imbrian event probably occurred between 3.90 or 3.88 and 3.65 b.y. ago.

  9. Roturas retinianas em retinocoroidite por toxoplasmose: série de casos Retinal tears in toxoplasmic retinochoroiditis: case series

    Directory of Open Access Journals (Sweden)

    Daniel da Rocha Lucena

    2009-12-01

    Full Text Available Trata-se de série retrospectiva de 10 pacientes com rotura retiniana e retinocoroidite por toxoplasmose atendidos no Hospital das Clínicas da Faculdade de Medicina de Ribeirão Preto, de janeiro de 2007 a abril de 2008, com objetivo de avaliar a relação entre lesões de retinocoroidite e a ocorrência de rotura retiniana. Foram utilizados teste de Fisher e qui-quadrado com nível de significância pThis study is a retrospective case series aiming to evaluate the relation between toxoplasmic retinochoroiditis scars and the occurrence of retinal tears. Ten patients with retinal tear and toxoplasmic retinochoroiditis examined at the School of Medicine of Ribeirão Preto Clinics Hospital, between January 2007 and April 2008, were included. Fisher test and qui-square test with significance level of p<0.05 were used. Eight cases (80% had retinal detachment. Twelve tears were found and localized mostly in the temporal superior periphery (6 cases, 50%. No statistically significant association between retinal tear and chorioretinal scar localization was observed considering five retinal quadrants (p=0.0828 or three zones (p=0.2507. The occurrence of retinal tears in patients with uveitis may be related to early posterior vitreous detachment caused by the intraocular inflammatory process. No correlation was observed between the localization of retinal tears and chorioretinal scars in this study, which suggests a causative factor not directly related to the presence of a scar.

  10. Reactive documentation system

    Science.gov (United States)

    Boehnlein, Thomas R.; Kramb, Victoria

    2018-04-01

    Proper formal documentation of computer acquired NDE experimental data generated during research is critical to the longevity and usefulness of the data. Without documentation describing how and why the data was acquired, NDE research teams lose capability such as their ability to generate new information from previously collected data or provide adequate information so that their work can be replicated by others seeking to validate their research. Despite the critical nature of this issue, NDE data is still being generated in research labs without appropriate documentation. By generating documentation in series with data, equal priority is given to both activities during the research process. One way to achieve this is to use a reactive documentation system (RDS). RDS prompts an operator to document the data as it is generated rather than relying on the operator to decide when and what to document. This paper discusses how such a system can be implemented in a dynamic environment made up of in-house and third party NDE data acquisition systems without creating additional burden on the operator. The reactive documentation approach presented here is agnostic enough that the principles can be applied to any operator controlled, computer based, data acquisition system.

  11. Reactive transport models and simulation with ALLIANCES

    International Nuclear Information System (INIS)

    Leterrier, N.; Deville, E.; Bary, B.; Trotignon, L.; Hedde, T.; Cochepin, B.; Stora, E.

    2009-01-01

    Many chemical processes influence the evolution of nuclear waste storage. As a result, simulations based only upon transport and hydraulic processes fail to describe adequately some industrial scenarios. We need to take into account complex chemical models (mass action laws, kinetics...) which are highly non-linear. In order to simulate the coupling of these chemical reactions with transport, we use a classical Sequential Iterative Approach (SIA), with a fixed point algorithm, within the mainframe of the ALLIANCES platform. This approach allows us to use the various transport and chemical modules available in ALLIANCES, via an operator-splitting method based upon the structure of the chemical system. We present five different applications of reactive transport simulations in the context of nuclear waste storage: 1. A 2D simulation of the lixiviation by rain water of an underground polluted zone high in uranium oxide; 2. The degradation of the steel envelope of a package in contact with clay. Corrosion of the steel creates corrosion products and the altered package becomes a porous medium. We follow the degradation front through kinetic reactions and the coupling with transport; 3. The degradation of a cement-based material by the injection of an aqueous solution of zinc and sulphate ions. In addition to the reactive transport coupling, we take into account in this case the hydraulic retroaction of the porosity variation on the Darcy velocity; 4. The decalcification of a concrete beam in an underground storage structure. In this case, in addition to the reactive transport simulation, we take into account the interaction between chemical degradation and the mechanical forces (cracks...), and the retroactive influence on the structure changes on transport; 5. The degradation of the steel envelope of a package in contact with a clay material under a temperature gradient. In this case the reactive transport simulation is entirely directed by the temperature changes and

  12. Large area ion and plasma beam sources

    Energy Technology Data Exchange (ETDEWEB)

    Waldorf, J. [IPT Ionen- und Plasmatech. GmbH, Kaiserslautern (Germany)

    1996-06-01

    In the past a number of ion beam sources utilizing different methods for plasma excitation have been developed. Nevertheless, a widespread use in industrial applications has not happened, since the sources were often not able to fulfill specific demands like: broad homogeneous ion beams, compatibility with reactive gases, low ion energies at high ion current densities or electrical neutrality of the beam. Our contribution wants to demonstrate technical capabilities of rf ion and plasma beam sources, which can overcome the above mentioned disadvantages. The physical principles and features of respective sources are presented. We report on effective low pressure plasma excitation by electron cyclotron wave resonance (ECWR) for the generation of dense homogeneous plasmas and the rf plasma beam extraction method for the generation of broad low energy plasma beams. Some applications like direct plasma beam deposition of a-C:H and ion beam assisted deposition of Al and Cu with tailored thin film properties are discussed. (orig.).

  13. Large area ion and plasma beam sources

    International Nuclear Information System (INIS)

    Waldorf, J.

    1996-01-01

    In the past a number of ion beam sources utilizing different methods for plasma excitation have been developed. Nevertheless, a widespread use in industrial applications has not happened, since the sources were often not able to fulfill specific demands like: broad homogeneous ion beams, compatibility with reactive gases, low ion energies at high ion current densities or electrical neutrality of the beam. Our contribution wants to demonstrate technical capabilities of rf ion and plasma beam sources, which can overcome the above mentioned disadvantages. The physical principles and features of respective sources are presented. We report on effective low pressure plasma excitation by electron cyclotron wave resonance (ECWR) for the generation of dense homogeneous plasmas and the rf plasma beam extraction method for the generation of broad low energy plasma beams. Some applications like direct plasma beam deposition of a-C:H and ion beam assisted deposition of Al and Cu with tailored thin film properties are discussed. (orig.)

  14. Evaluación de ansiedad y frecuencia cardíaca: ensayo clínico aleatorizado de la remoción químico-mecánica de caries con papacárieDuoTM. Proyecto piloto

    Directory of Open Access Journals (Sweden)

    Elisa-Lopes-Craveiro

    2013-01-01

    Full Text Available Objetivo: Evaluar el grado de ansiedad y frecuencia cardíaca en pacientes infantiles sometidos a tratamiento con PapacárieDuoTM, comparado a un grupo control con el uso del método tradicional (fresa. Métodos: Se desarrolló un ensayo clínico aleatorizado en 7 pacientes infantiles (5 a 11 años. Fueron tratados 2 molares deciduos en cada niño, realizando la aleatorización para los dos grupos (G1= remoción químico-mecánica de la caries con Papacárie DuoTM; G2= remoción de la dentina cariada utilizando fresa con baja velocidad, realizando un procedimiento restaurador similar en ambos (cemento de ionómero de vidrio y control. Se evaluó el tiempo de duración del procedimiento, ansiedad y frecuencia cardíaca. Los datos fueron tabulados con el programa SPSS para Windows (v.17 y analizados estadísticamente mediante el Test Wilcoxon, para los resultados del test VPT; el Test t pareado, para la frecuencia cardíaca, y el Test t para el tiempo de tratamiento, considerándose el nivel de significancia de 5%. Resultados: La media del tiempo para el G1 fue menor (p<0.001, así como la frecuencia cardíaca en el mismo grupo luego de finalizado el tratamiento (p=0.042. No hubo diferencia estadística en las reacciones emocionales antes (p=0.317, durante (p=0.355 y después (p=0.564 de los procedimientos. Conclusión: El tiempo operatorio y la frecuencia cardíaca fueron menores en los niños tratados con el Papacárie DuoTM al ser comparados con los que fueron tratados con tratamiento convencional. Estos hallazgos demuestran las ventajas de los tratamientos conservadores en dientes deciduos.

  15. Ion implantation

    International Nuclear Information System (INIS)

    Johnson, E.

    1986-01-01

    It is the purpose of the present paper to give a review of surface alloy processing by ion implantation. However, rather than covering this vast subject as a whole, the survey is confined to a presentation of the microstructures that can be found in metal surfaces after ion implantation. The presentation is limited to alloys processed by ion implantation proper, that is to processes in which the alloy compositions are altered significantly by direct injection of the implanted ions. The review is introduced by a presentation of the processes taking place during development of the fundamental event in ion implantation - the collision cascade, followed by a summary of the various microstructures which can be formed after ion implantation into metals. This is compared with the variability of microstructures that can be achieved by rapid solidification processing. The microstructures are subsequently discussed in the light of the processes which, as the implantations proceed, take place during and immediately after formation of the individual collision cascades. These collision cascades define the volumes inside which individual ions are slowed down in the implanted targets. They are not only centres for vigorous agitation but also the sources for formation of excess concentrations of point defects, which will influence development of particular microstructures. A final section presents a selection of specific structures which have been observed in different alloy systems. (orig./GSCH)

  16. Quantification of Hydroxyl Radical reactivity in the urban environment using the Comparative Reactivity Method (CRM)

    Science.gov (United States)

    Panchal, Rikesh; Monks, Paul

    2015-04-01

    Hydroxyl (OH) radicals play an important role in 'cleansing' the atmosphere of many pollutants such as, NOx, CH4 and various VOCs, through oxidation. To measure the reactivity of OH, both the sinks and sources of OH need to be quantified, and currently the overall sinks of OH seem not to be fully constrained. In order to measure the total rate loss of OH in an ambient air sample, all OH reactive species must be considered and their concentrations and reaction rate coefficients with OH known. Using the method pioneered by Sinha and Williams at the Max Plank Institute Mainz, the Comparative Reactivity Method (CRM) which directly quantifies total OH reactivity in ambient air without the need to consider the concentrations of individual species within the sample that can react with OH, has been developed and applied in a urban setting. The CRM measures the concentration of a reactive species that is present only in low concentrations in ambient air, in this case pyrrole, flowing through a reaction vessel and detected using Proton Transfer Reaction - Mass Spectrometry (PTR-MS). The poster will show a newly developed and tested PTR-TOF-MS system for CRM. The correction regime will be detailed to account for the influence of the varying humidity between ambient air and clean air on the pyrrole signal. Further, examination of the sensitivity dependence of the PTR-MS as a function of relative humidity and H3O+(H2O) (m/z=37) cluster ion allows the correction for the humidity variation, between the clean humid air entering the reaction vessel and ambient air will be shown. NO, present within ambient air, is also a potential interference and can cause recycling of OH, resulting in an overestimation of OH reactivity. Tests have been conducted on the effects of varying NO concentrations on OH reactivity and a correction factor determined for application to data when sampling ambient air. Finally, field tests in the urban environment at the University of Leicester will be shown

  17. Análise de custo-efetividade de métodos preventivos para superfície oclusal de acordo com o risco de cárie: resultados de um ensaio clínico controlado

    Directory of Open Access Journals (Sweden)

    Elaine Pereira da Silva Tagliaferro

    2013-11-01

    Full Text Available Este estudo apresenta o resultado de uma avaliação de custo-efetividade conduzida ao longo de um ensaio clínico controlado para avaliar a efetividade do selamento com ionômero de vidro modificado por resina (Vitremer, 3M ESPE e da aplicação de verniz fluoretado (Duraphat, Col-gate em superfícies oclusais de primeiros molares permanentes, em crianças de 6 a 8 anos (N = 268, segundo o risco de cárie (alto risco; baixo risco. As crianças foram examinadas semestralmente, ao longo de 24 meses, pelo mesmo dentista calibrado, após alocação em seis grupos: controle alto risco e baixo risco (educação em saúde bucal trimestral; verniz alto risco e baixo risco (educação em saúde bucal trimestral + aplicação semestral de verniz; e selante alto risco e baixo risco (educação em saúde bucal trimestral + única aplicação do selante. A análise mostrou que o selamento de primeiros molares permanentes em crianças de alto risco apresentou razão de C/E de R$ 225,21(US$ 119,80 por superfície oclusal salva, e razão incremental de C/E de R$ 203,71(US$ 108,36 por superfície oclusal adicional salva. Conclui-se que uma única aplicação de selante, em escolares de alto risco, foi a intervenção mais custo-efetiva.

  18. Reactive Power from Distributed Energy

    Energy Technology Data Exchange (ETDEWEB)

    Kueck, John; Kirby, Brendan; Rizy, Tom; Li, Fangxing; Fall, Ndeye

    2006-12-15

    Distributed energy is an attractive option for solving reactive power and distribution system voltage problems because of its proximity to load. But the cost of retrofitting DE devices to absorb or produce reactive power needs to be reduced. There also needs to be a market mechanism in place for ISOs, RTOs, and transmission operators to procure reactive power from the customer side of the meter where DE usually resides. (author)

  19. Reactive Power from Distributed Energy

    International Nuclear Information System (INIS)

    Kueck, John; Kirby, Brendan; Rizy, Tom; Li, Fangxing; Fall, Ndeye

    2006-01-01

    Distributed energy is an attractive option for solving reactive power and distribution system voltage problems because of its proximity to load. But the cost of retrofitting DE devices to absorb or produce reactive power needs to be reduced. There also needs to be a market mechanism in place for ISOs, RTOs, and transmission operators to procure reactive power from the customer side of the meter where DE usually resides. (author)

  20. Reactive programming in eventsourcing systems

    OpenAIRE

    Kučinskas, Žilvinas

    2017-01-01

    Eventsourcing describes current state as series of events that occurred in a system. Events hold all information that is needed to recreate current state. This method allows to achieve high volume of transactions, and enables efficient replication. Whereas reactive programming lets implement reactive systems in declarative style, decomposing logic into smaller, easier to understand components. Thesis aims to create reactive programming program interface, incorporating both principles. Applyin...

  1. Reactive Programming in Standard ML

    OpenAIRE

    Pucella, Riccardo

    2004-01-01

    Reactive systems are systems that maintain an ongoing interaction with their environment, activated by receiving input events from the environment and producing output events in response. Modern programming languages designed to program such systems use a paradigm based on the notions of instants and activations. We describe a library for Standard ML that provides basic primitives for programming reactive systems. The library is a low-level system upon which more sophisticated reactive behavi...

  2. Positive void reactivity

    International Nuclear Information System (INIS)

    Diamond, D.J.

    1992-09-01

    This report is a review of some of the important aspects of the analysis of large loss-of-coolant accidents (LOCAs). One important aspect is the calculation of positive void reactivity. To study this subject the lattice physics codes used for void worth calculations and the coupled neutronic and thermal-hydraulic codes used for the transient analysis are reviewed. Also reviewed are the measurements used to help validate the codes. The application of these codes to large LOCAs is studied with attention focused on the uncertainty factor for the void worth used to bias the results. Another aspect of the subject dealt with in the report is the acceptance criteria that are applied. This includes the criterion for peak fuel enthalpy and the question of whether prompt criticality should also be a criterion. To study the former, fuel behavior measurements and calculations are reviewed. (Author) (49 refs., 2 figs., tab.)

  3. Massive florid reactive periostitis

    International Nuclear Information System (INIS)

    Nance, K.V.; Renner, J.B.; Brashear, H.R.; Siegal, G.P.; North Carolina Univ., Chapel Hill, NC

    1990-01-01

    Florid reactive periostitis is a rare, benign process usually occurring in the small, tubular bones of the hands and feet. Typically the lesion occurs in an adolescent or young adult and presents as a small area of pain and erythema over the affected bone. Although the histologic features may suggest malignancy, there is usually little radiographic evidence to support such a diagnosis. In the following report an unusual example of this entity is described whose large size and relentless local progression led to initial diagnostic uncertainty and eventual aggressive management. This case suggests that a wide spectrum of radiologic and morphologic changes may be seen in this entity and that a seemingly unrelated genetic disease may alter the typical clinical course. (orig.)

  4. Pembrolizumab reactivates pulmonary granulomatosis

    Directory of Open Access Journals (Sweden)

    Majdi Al-dliw

    2017-01-01

    Full Text Available Sarcoid like reaction is a well-known entity that occurs as a consequence to several malignancies or their therapies. Immunotherapy has gained a lot of interest in the past few years and has recently gained approval as first line therapy in multiple advanced stage malignancies. Pneumonitis has been described as complication of such therapy. Granulomatous inflammation has been only rarely reported subsequent to immunotherapy. We describe a case of granulomatous inflammation reactivation affecting the lungs in a patient previously exposed to Pembrolizumab and have evidence of a distant granulomatous infection. We discuss potential mechanisms of the inflammation and assert the importance of immunosuppression in controlling the dis-inhibited immune system.

  5. Reactive Oxygen Species

    DEFF Research Database (Denmark)

    Franchina, Davide G.; Dostert, Catherine; Brenner, Dirk

    2018-01-01

    T cells are a central component of defenses against pathogens and tumors. Their effector functions are sustained by specific metabolic changes that occur upon activation, and these have been the focus of renewed interest. Energy production inevitably generates unwanted products, namely reactive...... and transcription factors, influencing the outcome of the T cell response. We discuss here how ROS can directly fine-tune metabolism and effector functions of T cells....... oxygen species (ROS), which have long been known to trigger cell death. However, there is now evidence that ROS also act as intracellular signaling molecules both in steady-state and upon antigen recognition. The levels and localization of ROS contribute to the redox modeling of effector proteins...

  6. Weigle Reactivation in Acinetobacter Calcoaceticus

    DEFF Research Database (Denmark)

    Berenstein, Dvora

    1982-01-01

    phage and host survivals of about 5 times 10-6 and 1 times 10-1, respectively. Intracellular development of W-reactivated P78 was followed by one-step growth experiments. Conditions which allowed maximal W-reactivation also extended the period of phage production and yielded a somewhat reduced burst......Weigle (W)-reactivation was demonstrated in Acinetobacter calcoaceticus for the UV-irra-diated lysogenic phage P78. The reactivation factor (survival of irradiated phage on irradiated bacteria/ survival on unirradiated bacteria) reached a maximum value of 20. This was obtained at UV-doses giving...

  7. Ion Bernstein wave heating research

    International Nuclear Information System (INIS)

    Ono, Masayuki.

    1992-03-01

    Ion Bernstein wave heating (IBWH) utilizes the ion Bernstein wave (IBW), a hot plasma wave, to carry the radio frequency (rf) power to heat tokamak reactor core. Earlier wave accessibility studies have shown that this finite-Larmor-radius (FLR) mode should penetrate into a hot dense reactor plasma core without significant attenuation. Moreover, the IBW's low phase velocity (ω/k perpendicular ∼ V Ti much-lt V α ) greatly reduces the otherwise serious wave absorption by the 3.5 MeV fusion α-particles. In addition, the property of IBW's that k perpendicular ρ i ∼ 1 makes localized bulk ion heating possible at the ion cyclotron harmonic layers. Such bulk ion heating can prove useful in optimizing fusion reactivity. In another vein, with proper selection of parameters, IBW's can be made subject to strong localized electron Landau damping near the major ion cyclotron harmonic resonance layers. This property can be useful, for example, for rf current drive in the reactor plasma core. This paper discusses this research

  8. Tendências das séries históricas do índice de calor no município de Santa Maria - RS

    Directory of Open Access Journals (Sweden)

    Stefanía Dalmolin da Silva

    2014-01-01

    Full Text Available Este trabalho teve como objetivo calcular e analisar as séries históricas mensais do Índice de Calor (IC para Santa Maria, RS, Brasil, no período de 1968 a 2011. As variáveis meteorológicas utilizadas neste trabalho foram pressão atmosférica, temperatura do bulbo seco e temperatura do bulbo úmido, no horário das 9h (12UTC, 15h (18UTC e 21h (00UTC. Foi realizada análise de tendência das séries históricas para o valor absoluto e a média mensais do IC através do teste de Mann-Kendall e análise de regressão linear simples para quantificar a tendência, com nível de significância de 95% (α=0,05. Para o valor máximo, no horário das 15h (18UTC, as séries históricas para os meses de janeiro e abril apresentaram acréscimo no valor do índice de calor na magnitude de 0,76°C década-1 e 0,92°C década-1, respectivamente. No horário das 21h (00 UTC, os meses de abril e novembro apresentaram aumento de 0,43°C década-1 e 0,55°C década-1, respectivamente. Porém os meses de maio e agosto apresentaram diminuição de 0,69°C década-1 e 0,31°C década-1, respectivamente.

  9. Reescritas de peças de Shakespeare para o público jovem: a série Mangá Shakespeare

    Directory of Open Access Journals (Sweden)

    Marcia do Amaral Peixoto Martins

    2014-06-01

    Full Text Available Este artigo enfoca reescritas de peças de Shakespeare voltadas para o público jovem e publicadas sob forma de quadrinhos japoneses na série Manga Shakespeare, publicada pela editora inglesa SelfMadeHero, e disponíveis em português do Brasil pela Galera Record, com destaque para a adaptação de Hamlet. Após uma apresentação geral da proposta da série inglesa e dos títulos já publicados, pelo menos dois níveis de reescrita de Hamlet serão examinados: inicialmente, a adaptação da peça para mangá, um processo que não só agrega multimodalidade ao produto final mas que também pode implicar mudanças concernentes a tempo e espaço, entre outras. Mais adiante, a ênfase recairá sobre a tradução interlingual do texto adaptado e dos paratextos, que resultaram na edição brasileira que integra a série intitulada Mangá Shakespeare. Para ambos os níveis de reescrita serão verificados: (i aspectos gerais das transposições; (ii o grau de manutenção das principais características da obra com respeito a tema, trama, desenho dos personagens e linguagem; e (iii a imagem do autor e da obra que resulta do trabalho de reescrita.

  10. ries temporais de NDVI do sensor SPOT Vegetation e algoritmo SAM aplicados ao mapeamento de cana‑de‑açúcar

    Directory of Open Access Journals (Sweden)

    Luiz Eduardo Vicente

    2012-09-01

    Full Text Available O objetivo deste trabalho foi avaliar o mapeamento de área de cana‑de‑açúcar por meio de série temporal, de seis anos de dados do índice de vegetação por diferença normalizada (NDVI, oriundos do sensor Vegetation, a bordo do satélite "système pour l'observation de la Terre" (SPOT. Três classes de cobertura do solo (cana‑de‑açúcar, pasto e floresta, do Estado de São Paulo, foram selecionadas como assinaturas espectro‑temporais de referência, que serviram como membros extremos ("endmembers" para classificação com o algoritmo "spectral angle mapper" (SAM. A partir desta classificação, o mapeamento da área de cana‑de‑açúcar foi realizado com uso de limiares na imagem-regra do SAM, gerados a partir dos valores dos espectros de referência. Os resultados mostram que o algoritmo SAM pode ser aplicado a séries de dados multitemporais de resolução moderada, o que permite eficiente mapeamento de alvo agrícola em escala mesorregional. Dados oficiais de áreas de cana‑de‑açúcar, para as microrregiões paulistas, apresentam boa correlação (r² = 0,8 com os dados obtidos pelo método avaliado. A aplicação do algoritmo SAM mostrou ser útil em análises temporais. As séries temporais de NDVI do sensor SPOT Vegetation podem ser utilizadas para mapeamento da área de cana‑de‑açúcar em baixa resolução.

  11. Les séries figées dans Le traité de stylistique de Charles Bally (1865-1947

    Directory of Open Access Journals (Sweden)

    Brigitte Lépinette

    2013-12-01

    Full Text Available Cet article contextualise dans Le traité de stylistique ([Heidelberg, 1909 et 1921] 1951 de Charles Bally le traitement des séries figées, question qui, en particulier, après les recherches sur la combinatoire sémantico-lexicale d’Igor Mel’čuk et les travaux syntaxico-sémantiques, de base distributionaliste, de Maurice Gross spécialement, a donné lieu, de nos jours, à une littérature linguistique aussi bien quantitativement que qualitativement importante. Avant ces derniers auteurs, Bally a fait de ces séries phraséologiques un élément sur lequel portera son double objectif d’identification et de délimitation dans la langue des faits d’expression liés à l’affectivité (considérés par opposition aux faits d’expression qui le sont à la pensée. Dans le cadre des présupposés linguistiques particuliers de la stylistique de Bally, l’analyse des séries figées permettra à ce linguiste d’en reconnaître les principales caractéristiques (lexicales, sémantiques mais non syntaxiques. Cependant, –contrairement aux études récentes dans ce domaine, d’abord théoriques– elle sera mise au service d’un apprentissage du français s’appuyant sur ce que nous pouvons appeler un corpus (avant la lettre destiné à l’apprentissage d’une langue.

  12. Ultrahigh reactivity and grave nanotoxicity of copper nanoparticles

    International Nuclear Information System (INIS)

    Huan Meng; Zhen Chen; Chengcheng Zhang; Yun Wang; Yuliang Zhao

    2007-01-01

    Recently, it was reported that the toxicity of copper particles increases with the decrease of the particle size on a mass basis. To understand this phenomenon, inductively coupled plasma mass spectrometry (ICP-MS) techniques and in vitro chemical studies were carried out to explore how they produce toxicity in vivo. The results suggest that when the sizes of particles become small and down to a nanoscale, copper becomes extremely reactive in a simulative intracorporeal environment. The nanosized copper particles consume the hydrogen ions in stomach more quickly than micron ones. These processes further convert the copper nanoparticles into cupric ions whose toxicity is very high in vivo. (author)

  13. Algérie

    African Journals Online (AJOL)

    PR BOKO

    Le fruit est une baie ovale, sèche et lisse. C'est une plante ayant des qualités et des propriétés stimulantes antiseptiques et insecticides. Il sert à la fabrication des parfums. Rosmarinus officinalis est retrouvée même à l'état sauvage. Il peut être cultivé. La position systématique de cette espèce est : Ordre. Lamiales. Famille.

  14. Distúrbios alimentares e sua associação com erosão e cárie dentária em adolescentes

    OpenAIRE

    Brandt, Lorenna Mendes Temóteo

    2015-01-01

    Os prejuízos na saúde bucal de indivíduos portadores de distúrbios alimentares vêm sendo investigados, trazendo consigo questões discordantes quanto ao comprometimento dos dentes. Diante disso, realizou-se um estudo transversal controlado, com o objetivo de avaliar a ocorrência de erosão e cárie dentária em adolescentes mulheres, de 15 a 18 anos, em risco de estarem sofrendo de distúrbios alimentares e compará-las a adolescentes saudáveis. A amostra probabilística foi compos...

  15. Análise de movimentos motores básicos em crianças da primeira série do ensino fundamental

    OpenAIRE

    Freire, Vinícius de Souza

    2013-01-01

    O presente artigo tem o intuito de analisar as habilidades motoras básicas de crianças por meio do desenvolvimento da motricidade fina, motricidade global e equilíbrio, os testes foram realizados em uma determinada escola da rede pública de ensino da Região administrativa da Asa Sul e uma escola da rede particular da Asa Sul, fazendo uma comparação entre as duas posteriormente, chegando à conclusão que a prática de Educação Física nas séries iniciais tem grande importância no desenvolvimento ...

  16. Les séries polonaises des années 1970 : entre contraintes politiques et censures génériques

    Directory of Open Access Journals (Sweden)

    Ania Szczepanska

    2011-04-01

    Full Text Available Dans les années 70, le directeur de la télévision polonaise lance la « propagande du succès », une ligne éditoriale censée refléter au petit écran la modernisation économique du pays. C’est à cette époque qu’est produite la série culte des Polonais : Le Quarantenaire. Dix ans plus tard et en plein état de guerre, une autre série connaîtra un grand succès, Jean le Cœur. Les deux séries sont produites par le groupe de production X, dirigé par Andrzej Wajda et connu au contraire pour ses films d’auteur du cinéma de l’inquiétude morale. Comment expliquer cette alliance inattendue entre télévision et cinéma ? Cette origine cinématographique a-t-elle marqué l’écriture filmique des deux séries télévisées ? La sérialité permet-elle de penser autrement la réalité socialiste ?In the seventies, the director of Polish Television launched the "success propaganda", an editorial line supposed to be the TV portrayal of the nation's economic modernisation. During that period the cult Polish series Middle-aged man [Czterdziestolatek] was produced. Ten years later, in the heat of the wartime period, another series had great success: John Heart [Jan Serce]. Both series were produced by the production group "X", headed by Andrzej Wajda, and were better known for producing independent films that were part and parcel of a cinema that expressed moral concern. How can this unexpected alliance between TV and the cinema be explained? Did the cinema-oriented producers influence the filmic grammar of the two series? Can cinematographers use the tools of TV series to express a socialist reality in a different way?

  17. CSI, de la série au jeu : « a more immersive experience »

    OpenAIRE

    Monnet-Cantagrel, Hélène

    2016-01-01

    CSI est une franchise de séries policières construites autour d’un même principe narratif de résolution des enquêtes par les techniques scientifiques d’investigation. D’objectif ouvertement commercial, de l’ordre du marketing, et répétitives, les franchises de médias n’ont pas toujours bonne presse, accusées de consacrer la transformation des biens culturels en produits industriels. Les franchises sont pourtant une pratique de plus en plus fréquente à la télévision - américaine - qui, depuis ...

  18. Efeito do Exercício com 1 e 3 Minutos de Intervalo de Descanso Entre as Séries na Atividade Sérica das Transaminases

    Directory of Open Access Journals (Sweden)

    Ramon Martins Alves

    2011-12-01

    Full Text Available O treinamento de força (TF intenso ocasiona danos na estrutura muscular, que podem ser detectados por meio de marcadores indiretos. OBJETIVO. Verificar se há alterações na atividade da creatina quinase (CK, da aspartato transaminase (AST e alanina transaminase (ALT com o TF em diferentes intervalos entre séries e exercícios. MÉTODOS. Treze voluntários (± 21,8 anos; ±173,6 cm; ±68,3 kg realizaram o teste de uma repetição máxima (1RM nos exercícios: supino reto, puxada (pulley, desenvolvimento sentado, tríceps (pulley e rosca bíceps. Após sete dias, todos foram submetidos a uma coleta de sangue (PRE e realizaram 4 séries máximas até a falha concêntrica com intensidade de 85% de 1RM e intervalos de 1 ou 3 minutos entre as séries e exercícios. Todos retornaram ao mesmo local 24, 48 e 72 horas após a sessão para mais uma coleta de sangue. Repetindo os procedimentos após uma semana, porém os voluntários que realizaram o teste com intervalo de 1 minuto na semana seguinte manteriam intervalos de 3 minutos e vice-versa. Realizou-se ANOVA mantendo como significância p<0,05. RESULTADOS. Houve redução significativa do número de repetições a cada série de todos os exercícios com 1 e 3 minutos de intervalo. Observou-se um aumento significativo da atividade sérica de CK e de AST 24, 48 e 72 horas utilizando ambos os intervalos. ALT não se alterou. CONCLUSÃO. O TF causou aumento na atividade de CK e AST, mas sem apresentar diferenças com os intervalos utilizados. Porém, pequenos intervalos reduzem o volume total de repetições.

  19. Propriétés de l'enzyme malique des bactéries lactiques isolées de vins

    Directory of Open Access Journals (Sweden)

    Simone LAFON-LAFOURCADE

    1970-06-01

    Le comportement différent des bactéries lactiques vis-à-vis de l'acide L malique suivant la nature du test utilisé permet de supposer qu'il existe plusieurs sortes d'enzymes maliques d'activité, de localisation et de diffusion différentes ; il n'est pas exclu encore que la fermentation lactique de l'acide L malique puisse s'opérer par des voies différentes.

  20. Rôle des germes parasites des bactéries pathogènes dans l'autoépuration des eaux

    Directory of Open Access Journals (Sweden)

    GUELIN A.

    1969-04-01

    Full Text Available Existence dans les eaux polluées de germes parasites qui s'attaquent aux bactéries pathogènes. Le pouvoir bactéricide des eaux polluées dû, en grande partie à la présence dans ces eaux de différents représentants des germes parasites. Possibilité d'application pratique des germes parasites pour l'assainissement des eaux polluées.

  1. Quem é Dexter Morgan? A questão da identidade e da ética presentes em uma série de televisão

    Directory of Open Access Journals (Sweden)

    Rubens Francisco Torres

    2010-10-01

    Full Text Available Dexter é um seriado americano que mostra a vida de um serial killer que mata outros assassinos. Nessa série estão presentes muitos temas filosóficos importantes, como a busca pela identidade pessoal, o valor da ética, e quais as implicações que uma atitude pode ou não ter, de acordo com a maneira que escolhemos resolvê-la. O artigo procura destacar como esses temas estão presentes no seriado, e como são determinantes para a evolução das personagens na trama. 

  2. Scaffold Diversity from N-Acyliminium Ions

    DEFF Research Database (Denmark)

    Wu, Peng; Nielsen, Thomas E

    2017-01-01

    N-Acyliminium ions are powerful reactive species for the formation of carbon-carbon and carbon-heteroatom bonds. Strategies relying on intramolecular reactions of N-acyliminium intermediates, also referred to as N-acyliminium ion cyclization reactions, have been employed for the construction...... of structurally diverse scaffolds, ranging from simple bicyclic skeletons to complex polycyclic systems and natural-product-like compounds. This review aims to provide an overview of cyclization reactions of N-acyliminium ions derived from various precursors for the assembly of structurally diverse scaffolds...

  3. rieša tēls patērētāju priekšstatos: žurnāla "Klubs" 2014. gada reklāmu analīze

    OpenAIRE

    Blumberga, Lelde

    2015-01-01

    Bakalaura darba ”Vīriešu tēls patērētāju priekšstatos: žurnāla „Klubs” 2014. gada reklāmu analīze” mērķis ir noskaidrot, kāds vīrieša tēls tiek veidots vīriešu žurnālu reklāmas un tā patērētāja priekšstatos. Darba pētnieciskā problēma paredz, ka vīriešu tēls vīriešu žurnālos tiek pasniegts kā spilgts, veiksmīgs un ietekmīgs, kas var atstāt iespaidu uz patērētāja apziņu. Darbs sastāv no trīs daļām – teorētiskās, metodoloģiskās un empīriskās. Darba teorētiskajā daļā tiks apskatīta teorij...

  4. Memória de trabalho fonológica, atenção visual e leitura em crianças de 5ª e 6ª séries do ensino fundamental

    Directory of Open Access Journals (Sweden)

    Fabiana Bernardes Rangel Barboza

    2015-06-01

    Full Text Available ResumoNeste estudo avaliamos a memória de trabalho fonológica, a atenção visual e a habilidade de leitura em 37 escolares (16 meninas e 21 meninos de 5ª série (média de 11,3 anos e de 6ª série (média de 12,2 anos. Os participantes passaram pelo subteste de leitura do Teste de Desempenho Escolar, por um teste de atenção visual (paradigma de Posner e por três testes de memória de trabalho fonológica (palavras, pseudopalavras e dígitos. Crianças de ambas as séries apresentaram desempenho semelhante nas tarefas de leitura e memorização de dígitos. As crianças de 6ª série foram mais rápidas no teste de atenção visual e recordaram mais palavras e pseudopalavras que as crianças de 5ª série. Os resultados indicam o aumento na velocidade de processamento e maturação da memória de trabalho dos 11 aos 13 anos, mas o teste de memória para dígitos não detectou essa diferença.

  5. Electrospray Ionization Mass Spectrometric Analysis of Highly Reactive Glycosyl Halides

    Directory of Open Access Journals (Sweden)

    Lajos Kovács

    2012-07-01

    Full Text Available Highly reactive glycosyl chlorides and bromides have been analysed by a routine mass spectrometric method using electrospray ionization and lithium salt adduct-forming agents in anhydrous acetonitrile solution, providing salient lithiated molecular ions [M+Li]+, [2M+Li]+ etc. The role of other adduct-forming salts has also been evaluated. The lithium salt method is useful for accurate mass determination of these highly sensitive compounds.

  6. Factores salivales asociados a prevalencia e incremento de caries dental en escolares rurales Fatores salivares associados à prevalência e ao aumento de cáries dentais em escolares de área rural Salivary factors associated to the prevalence and increase of dental caries in rural schoolchildren

    Directory of Open Access Journals (Sweden)

    Lila Susana Cornejo

    2008-02-01

    Full Text Available OBJETIVO: Evaluar la asociación de la saliva y la prevalencia de caries. MÉTODOS: Estudio longitudinal de dos años, en una población de niños escolares rural de Cruz del Eje, Córdoba-Argentina, entre los años 2000 y 2002. La población de estudio comprendió la totalidad de escolares asistentes (N=196 a ocho escuelas rurales de 5 a 14 años de edad, ambos sexos. Se estudiaron tres momentos (N=46: base, 12 y 24 meses. Se evaluaron los componentes salivales y los índices CPOD y ceod. Se crearon las variables nominales, "caries" y "caries nueva" para evaluar riesgo de caries en el estudio base y en los tiempos 12 y 24 meses, respectivamente. Se aplicó el análisis de componentes principales para seleccionar factores salivales relacionados con la presencia de caries que a posterior se categorizaron según valor de la mediana como punto de corte. RESULTADOS: Se observó alta prevalencia de caries (50%-90% en los tres momentos de estudio. El incremento de caries fue significativamente mayor a los 12 meses (p=0.000, comparado con el observado a los 24 meses. En el estudio base se observó concentración baja y homogénea de los iones fosfato y calcio, y asociación significativa (pOBJETIVO: Avaliar a associação entre saliva e prevalência de cáries. MÉTODOS: Estudo longitudinal de dois anos, em população de escolares de Cruz del Eje, Córdoba-Argentina, entre os anos 2000 e 2002. A população de estudo compreendeu todos os escolares matriculados (N=196 em oito escolas rurais, de cinco a 14 anos de idade, ambos sexos, analisados em três momentos (N=46: base, 12 e 24 meses. Avaliaram-se os componentes salivares e os índices CPOD e ceod. As variáveis nominais "cáries" e "cáries novas" foram criadas para avaliar o risco de cáries no momento base e aos 12 e 14 meses, respectivamente. A análise dos componentes principais foi aplicada para selecionar os fatores salivares relacionados com a presença de cáries e em seguida foram

  7. Regarding KUR Reactivity Measurement System

    International Nuclear Information System (INIS)

    Nakamori, Akira; Hasegawa, Kei; Tsuchiyama, Tatsuo; Yamamoto, Toshihiro; Okumura, Ryo; Sano, Tadafumi

    2012-01-01

    This article reported: (1) the outline of the reactivity measurement system of Kyoto University Research Reactor (KUR), (2) the calibration data of control rod, (3) the problems and the countermeasures for range switching of linear output meter. For the laptop PC for the reactivity measurement system, there are four input signals: (1) linear output meter, (2) logarithmic output meter, (3) core temperature gauge, and (4) control rod position. The hardware of reactivity measurement system is controlled with Labview installed on the laptop. Output, reactivity, reactor period, and the change in reactivity due to temperature effect or Xenon effect are internally calculated and displayed in real-time with Labview based on the four signals above. Calculation results are recorded in the form of a spreadsheet. At KUR, the reactor core arrangement was changed, so the control rod was re-calibrated. At this time, calculated and experimental values of reactivity based on the reactivity measurement system were compared, and it was confirmed that the reactivity calculation by Labview was accurate. The range switching of linear output meter in the nuclear instrumentation should automatically change within the laptop, however sometimes this did not function properly in the early stage. It was speculated that undefined percent values during the transition of percent value were included in the calculation and caused calculation errors. The range switching started working properly after fixing this issue. (S.K.)

  8. Reactive agents and perceptual ambiguity

    NARCIS (Netherlands)

    Dartel, M. van; Sprinkhuizen-Kuyper, I.G.; Postma, E.O.; Herik, H.J. van den

    2005-01-01

    Reactive agents are generally believed to be incapable of coping with perceptual ambiguity (i.e., identical sensory states that require different responses). However, a recent finding suggests that reactive agents can cope with perceptual ambiguity in a simple model (Nolfi, 2002). This paper

  9. A Tariff for Reactive Power

    Energy Technology Data Exchange (ETDEWEB)

    Kueck, John D [ORNL; Kirby, Brendan J [ORNL; Li, Fangxing [ORNL; Tufon, Christopher [Pacific Gas and Electric Company; Isemonger, Alan [California Independent System Operator

    2008-07-01

    Two kinds of power are required to operate an electric power system: real power, measured in watts, and reactive power, measured in volt-amperes reactive or VARs. Reactive power supply is one of a class of power system reliability services collectively known as ancillary services, and is essential for the reliable operation of the bulk power system. Reactive power flows when current leads or lags behind voltage. Typically, the current in a distribution system lags behind voltage because of inductive loads such as motors. Reactive power flow wastes energy and capacity and causes voltage droop. To correct lagging power flow, leading reactive power (current leading voltage) is supplied to bring the current into phase with voltage. When the current is in phase with voltage, there is a reduction in system losses, an increase in system capacity, and a rise in voltage. Reactive power can be supplied from either static or dynamic VAR sources. Static sources are typically transmission and distribution equipment, such as capacitors at substations, and their cost has historically been included in the revenue requirement of the transmission operator (TO), and recovered through cost-of-service rates. By contrast, dynamic sources are typically generators capable of producing variable levels of reactive power by automatically controlling the generator to regulate voltage. Transmission system devices such as synchronous condensers can also provide dynamic reactive power. A class of solid state devices (called flexible AC transmission system devices or FACTs) can provide dynamic reactive power. One specific device has the unfortunate name of static VAR compensator (SVC), where 'static' refers to the solid state nature of the device (it does not include rotating equipment) and not to the production of static reactive power. Dynamic sources at the distribution level, while more costly would be very useful in helping to regulate local voltage. Local voltage regulation would

  10. Gas phase reactivity of thermal metal clusters

    International Nuclear Information System (INIS)

    Castleman, A.W. Jr.; Harms, A.C.; Leuchtner, R.E.

    1991-01-01

    Reaction kinetics of metal cluster ions under well defined thermal conditions were studied using a flow tube reactor in combination with laser vaporization. Aluminum anions and cations were reacted with oxygen, and several species which are predicted jellium shell closings, were found to have special stability. Metal alloy cluster anions comprised of Al, V and Nb were also seen to react with oxygen. Alloy clusters with an even number of electrons reacted more slowly than odd electron species, and certain clusters appeared to be exceptionally unreactive. Copper cation clusters were observed to associate with carbon monoxide with reactivities that approach bulk behavior at surprisingly small cluster size. These reactions demonstrate how the rate of reaction changes with cluster size. (orig.)

  11. Gas phase reactivity of thermal metal clusters

    Science.gov (United States)

    Castleman, A. W., Jr.; Harms, A. C.; Leuchtner, R. E.

    1991-03-01

    Reaction kinetics of metal cluster ions under well defined thermal conditions were studied using a flow tube reactor in combination with laser vaporization. Aluminum anions and cations were reacted with oxygen, and several species which are predicted jellium shell closings, were found to have special stability. Metal alloy cluster anions comprised of Al, V and Nb were also seen to react with oxygen. Alloy clusters with an even number of electrons reacted more slowly than odd electron species, and certain clusters appeared to be exceptionally unreactive. Copper cation clusters were observed to associate with carbon monoxide with reactivities that approach bulk behavior at surprisingly small cluster size. These reactions demonstrate how the rate of reaction changes with cluster size.

  12. Structural Insights into 2,2′-Azino-Bis(3-Ethylbenzothiazoline-6-Sulfonic Acid) (ABTS)-Mediated Degradation of Reactive Blue 21 by Engineered Cyathus bulleri Laccase and Characterization of Degradation Products

    OpenAIRE

    Kenzom, T.; Srivastava, P.; Mishra, S.

    2014-01-01

    Advanced oxidation processes are currently used for the treatment of different reactive dyes which involve use of toxic catalysts. Peroxidases are reported to be effective on such dyes and require hydrogen peroxide and/or metal ions. Cyathus bulleri laccase, expressed in Pichia pastoris, catalyzes efficient degradation (78 to 85%) of reactive azo dyes (reactive black 5, reactive orange 16, and reactive red 198) in the presence of synthetic mediator ABTS [2,2′-azino-bis(3-ethylbenzothiazoline-...

  13. Limitations of Cl2/O2-based ICP-RIE of deep holes for planar photonic crystals in InP

    International Nuclear Information System (INIS)

    Kaspar, Peter; Fougner, Christopher; Kappeler, Roman; Jaeckel, Heinz

    2012-01-01

    A detailed study of dry-etching of high-aspect-ratio holes into an indium phosphide substrate is presented for a Cl 2 /O 2 -based plasma chemistry. The etching is performed in an inductively coupled plasma reactive ion etching reactor. The separate influence of the various etching parameters on the quality of the etched holes is identified. Quality measures such as high aspect ratio, hole cylindricity and verticality as well as sidewall smoothness can be controlled by varying the ICP power, the relative O 2 flow rate and the self-bias of the plasma. We were able to clearly identify trade-offs that have to be made and limitations of the etching chemistry/technology used: If the aspect ratio improves, then the cylindricity also improves, whereas the verticality and the sidewall smoothness degrade. In previous reports, a certain ambiguity is generally observed in the sense that different process parameters exhibit partially contradicting trade-offs. We show that this behaviour can be remedied by a careful selection of the variable parameters. (copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  14. PROCEEDINGS: MULTIPOLLUTANT SORBENT REACTIVITY ...

    Science.gov (United States)

    The report is a compilation of technical papers and visual aids presented by representatives of industry, academia, and government agencies at a workshop on multipollutant sorbent reactivity that was held at EPA's Environmental Research Center in Research Triangle Park, NC, on July 19-20, 1994. There were 16 technical presentations in three sessions, and a panel discussion between six research experts. The workshop was a forum for the exchange of ideas and information on the use of sorbents to control air emissions of acid gases (sulfur dioxide, nitrogen oxides, and hydrogen chloride); mercury and dioxins; and toxic metals, primarily from fossil fuel combustion. A secondary purpose for conducting the workshop was to help guide EPA's research planning activities. A general theme of the workshop was that a strategy of controlling many pollutants with a single system rather than systems to control individual pollutants should be a research goal. Some research needs cited were: hazardous air pollutant removal by flue gas desulfurization systems, dioxin formation and control, mercury control, waste minimization, impact of ash recycling on metals partitioning, impact of urea and sorbents on other pollutants, high temperature filtration, impact of coal cleaning on metals partitioning, and modeling dispersion of sorbents in flue gas. information

  15. Reactivation with productivity

    International Nuclear Information System (INIS)

    Garcia, Carlos Hernando

    2002-01-01

    A market to five years that it will move near $63.000 millions, starting from the production of 254.000 reserves that Ecopetrol requires for its maintenance and operation, it was projected with base in the offer study and it demands that they carried out the universities Javeriana and Industrial of Santander for the Colombian Company of Petroleum around the metal mechanic sector. In accordance with the figures of the report, Ecopetrol, like one of the state entities selected by the national government to design pilot programs, guided to reactivate the Colombian industry; it is projecting a good perspective for the Colombian economy and the invigoration of the national productive sector. In practical terms, the report points out that Ecopetrol, in its different operative centers, will require in next five years the quantity of had restored before mentioned in the lines of mechanical stamps, centrifugal bombs, inter chambers of heat, compressors and valves of security; pieces that are elaborated by international makers in 99%. To produce them nationally would represent to the company an economy of 52% of the total value of the purchases in next five years and a reduction of time of delivery of 17 weeks to one week

  16. Evaluation of synthetic zeolite as engineering passive permeable reactive barrier

    International Nuclear Information System (INIS)

    Ibrahim, O.A.A.

    2011-01-01

    The presence of toxic pollutants in groundwater brings about significant changes in the properties of water resources and has to be avoided in order to preserve the environmental quality. Heavy metals are among the most dangerous inorganic water pollutants, that related to many anthropogenic sources and their compounds are extremely toxic. The treatment of contaminated groundwater is among the most difficult and expensive environmental problems. Over the past years, permeable reactive barriers have provided an increasingly important role in the passive insitu treatment of contaminated groundwater. There are a large number of materials that are able to immobilize contaminants by sorption, including granulated active carbon, zeolite, montmorillonite, peat, compost, sawdust, etc. Zeolite X is a synthetic counterpart of the naturally occurring mineral Faujasite. It has one of the largest cavities and cavity entrances of any known zeolites. The main aim of this work is to examine the possibility of using synthetic zeolite X as an engineering permeable reactive barrier to remove heavy metals from a contaminated groundwater. Within this context, the following investigations were carried out: 1. Review on the materials most commonly used as engineered permeable reactive barriers to identify the important features to be considered in the examination of the proposed permeable reactive barrier material (zeolite X). 2. Synthesis of zeolite X and characterization of the synthesized material using different techniques. 3. Batch tests were carried out to characterize the equilibrium and kinetic sorption properties of the synthesized zeolite X towards the concerned heavy metals; zinc and cadmium ions. 4. Column tests were also performed to determine the design factors for permeable reactive barrier against zinc and cadmium ions solutions.Breakthrough curves measured in such experiments used to determine the hydrodynamic dispersion coefficients for both metal ions. 5. Analytical

  17. Quasilinear ion distribution function during first harmonic ion cyclotron heating

    International Nuclear Information System (INIS)

    Brambilla, M.

    1993-12-01

    The quasilinear modification of the ion distribution function during first harmonic ion cyclotron (FHIC) heating is investigated both with a simple already well established analytic one-dimensional approach, and with a new two dimensional steady state solver of the quasilinear kinetic equation, SSFPQL. By accepting to disregard the effects of ion trapping in banana orbits, but including finite Larmor radius effects, the latter code has been made much faster than full surface-averaged codes; yet it can provide most of the relevant information on the suprathermal ion tail produced by this heating method. With SSFPQL we confirm that the one-dimensional model gives fair approximations for global properties of the distribution function, such as the average energy content of the tail and the fusion reactivity. On the other hand the tail is found to be very anisotropic, the increase of the parallel effective temperature being a small fraction of the total energy increase. Information on the anisotropy is essential to study the feedback of the fast ion tail on wave propagation and absorption, which is quite sensitive to the distribution of parallel velocities. The insight gained in the derivation and discussion of this model can be used to build a selfconsistent description of this heating scenario, whose implementation requires only a reasonable numerical effort. (orig.)

  18. Predição de séries financeiras utilizando wavelets e redes neurais: ummodelo para os fundos de investimentos imobiliários

    Directory of Open Access Journals (Sweden)

    Fabrício Soares

    2014-08-01

    Full Text Available Este artigo apresenta o desenvolvimento de um modelo de predição de séries temporais financeiras com o uso da Rede Neural Artificial TLFN Distribuída (Time Lagged FeedForward Network - Rede Neural Alimentada para frente Atrasada no Tempo, treinada com o algoritmo backpropagation temporal e com o pré-processamento dos sinais de entrada realizado com as Transformadas Wavelets Discretas. A metodologia demonstra como a análise de multirresolução feita com o algoritmo piramidal de Mallat colaborou para o aumento da capacidade de generalização da rede neural, otimizando as previsões feitas pelo modelo implementado. Com a finalidade de demonstrar a eficácia desta metodologia, foi realizado um estudo de caso envolvendo a séries histórica de cotações das cotas, negociadas no mercado secundário, do Fundo de Investimento Imobiliário Almirante Barroso.

  19. Tendência das séries temporais de precipitação da região sul do Brasil

    Directory of Open Access Journals (Sweden)

    Adilson Pinheiro

    2013-09-01

    Full Text Available O objetivo deste trabalho é avaliar a presença de tendências nas séries temporais de precipitação no Sul do Brasil. Foram analisadas séries temporais diárias, mensais e anuais de 18 estações pluviométricas. As distribuições de probabilidade normal e de extremos tipo I foram empregadas para análise dos dados. Foi, ainda, aplicado o teste de tendência de Mann-Kendall na detecção de tendências ou de variabilidades climáticas. Os resultados mostram uma tendência positiva dos máximos diários anuais ao longo do tempo, assim como significativa elevação dos totais mensais e anuais na maioria das estações. O teste de tendência de Mann-Kendal mostra mudanças estatisticamente significativas, ao nível de 95%, em 16 das 18 estações pluviométricas analisadas.

  20. Aprendendo a gerenciar conflitos: um programa de intervenção para a 1ª série do ensino fundamental

    Directory of Open Access Journals (Sweden)

    Dâmaris Simon Camelo Borges

    2009-04-01

    Full Text Available Dificuldades interpessoais precoces na escola podem acarretar problemas acadêmicos e comportamentais persistentes. O objetivo deste estudo foi verificar a efetividade de um programa para melhorar a convivência na 1ª série do ensino fundamental. Uma intervenção multimodal, incluindo ensino de habilidades de solução de problemas interpessoais, valores humanos e autocontrole emocional, foi conduzida em uma classe de 1ª série com 30 alunos, nos meses de abril a outubro. Antes e depois da intervenção foram avaliados o desempenho pró-social e a percepção de estressores. Conflitos foram registrados em um diário de campo. Os resultados mostraram redução consistente nos conflitos interpessoais registrados no diário de campo e aumento no indicador pró-social. Comparadas a um grupo de 31 alunos que não passaram pela intervenção, depois de expostas ao programa, as crianças apresentaram melhor desempenho pró-social e menor suscetibilidade a situações estressantes. Conclui-se que o programa contribuiu efetivamente para melhorar os relacionamentos entre as crianças.

  1. Processamento fonológico e desempenho escolar nas séries iniciais do ensino fundamental Phonological processing and school performance in early grades of elementary school

    Directory of Open Access Journals (Sweden)

    Sabrina Mª Pimentel da Cunha Pinto Tenório

    2012-02-01

    Full Text Available OBJETIVO: caracterizar o desempenho escolar e o processamento fonológico de escolares da 1ª e 2ª séries, segundo o sexo e grau de escolaridade e investigar a existência de correlações entre essas variáveis. MÉTODO: participaram 88 escolares (48 meninos e 40 meninas entre cinco e oito anos de idade, sem queixas relacionadas à fala ou à aprendizagem. Foram avaliados por meio do Teste de Desempenho Escolar (Stein,1994 e pelas provas de nomeação rápida, repetição de pseudopalavras e consciência fonológica, habilidades relacionadas ao processamento fonológico. A análise estatística se deu pelo teste de Mann-Withney U e pelo coeficiente de Spearman, com intervalo de confiança de 95%. RESULTADOS: a maioria dos escolares apresentou classificação de desempenho inferior nos subtestes do Teste de Desempenho Escolar, com maior média de acertos para leitura. Não houve diferença significante entre meninos e meninas. Os escolares da 2ª série mostraram melhor desempenho em escrita, leitura e aritmética, quando comparados aos alunos da 1ª série. Ao contrário dos desempenhos em leitura, escrita, aritmética e consciência fonológica, os desempenhos em acesso lexical e memória fonológica não diferenciaram as séries. Na 1ª série, encontraram-se correlações positivas entre o acesso ao léxico mental e a consciência fonológica, entre leitura e escrita e consciência fonológica, e entre aritmética e consciência fonológica. Na 2ª série, identificaram-se correlações positivas entre escrita, leitura e aritmética e com a consciência fonológica, acesso ao léxico com memória fonológica e consciência fonológica. CONCLUSÃO: os escolares da 2ª série apresentaram melhores escores de desempenho escolar e de consciência fonológica quando comparados aos alunos 1ª, apesar da maioria ter alcançado classificação inferior à esperada para a série, definida pelo Teste. Diferentes variáveis do processamento fonol

  2. Dental caries in young male adults: prevalence, severity and associated factors Cárie dentária em homens jovens: prevalência, severidade e fatores associados

    Directory of Open Access Journals (Sweden)

    Marcelo Augusto Amaral

    2005-12-01

    Full Text Available The aim of the present study was to determine the prevalence and severity of dental caries as well as the needs for dental treatment in 18-year-old males from Maringá, PR, Brazil. The association of dental caries experience with socioeconomic variables was also tested. A cross sectional study was conducted in a random sample of 241 conscripts of the Brazilian Army. The adopted diagnosis criteria were those proposed by the World Health Organization. A socioeconomic questionnaire was utilized to determine family income and the criterion of the Brazil Economic Classification of the National Association of Research Enterprises. Associations among caries prevalence, DMF-T index, treatment needs and socioeconomic variables were evaluated by means of the Chi-Square, Mann-Whitney and Kruskal-Wallis tests. Caries prevalence was 82.6% and the mean DMF-T index was 4.6. Only a mean of 0.8 tooth per individual presented treatment needs. Significant statistical differences were found in caries prevalence and severity (DMF-T. The worst results were observed in the groups of lower income and purchasing power, indicating a need for the implementation of social policies that address these populations aiming at diminishing the existing differences in the health-disease process indicators. On the other hand, treatment needs were only associated to the Brazil Economic Classification Criterion variable (p O objetivo do presente estudo foi conhecer a prevalência e a severidade da cárie dentária, bem como as necessidades de tratamento odontológico de jovens de 18 anos de idade do sexo masculino em Maringá, Paraná, Brasil. A associação da experiência de cárie com variáveis socioeconômicas também foi testada. Foi realizado um estudo transversal em uma amostra aleatória de conscritos (n = 241 do Exército Brasileiro. Os critérios de diagnóstico adotados foram aqueles estabelecidos pela Organização Mundial de Saúde. Foram utilizados um question

  3. Occlusal caries diagnosis in permanent teeth: an in vitro study Diagnóstico de cárie oclusal em dentes permanentes: estudo in vitro

    Directory of Open Access Journals (Sweden)

    Gisele Angnes

    2005-12-01

    Full Text Available The reduction in caries prevalence has not occurred uniformly for all dental surfaces. As the occlusal surfaces are still the most likely sites for the development of lesions, new methods of diagnosis are still being evaluated. This study compared a laser fluorescence (LF system (DIAGNOdent with the Ekstrand’s visual system for in vitro detection of occlusal caries. A total of 57 extracted molars with macroscopically intact occlusal surfaces were selected. Two-examiners assessed 110 sites by visual inspection (VI and LF. After ten days from the first measurement, all teeth were re-evaluated through the same methods by each examiner. Caries extension was histologically assessed (X 40. The methods were compared by means of sensitivity, specificity, intra- and inter-examiner reproducibility and area under the ROC curve. The kappa’s test showed good intra- and inter-examiner reproducibility for both methods. VI and LF showed similar sensitivities for both examiners, however, VI showed higher specificities than LF. The overall analysis, as demonstrated by the area under the ROC curve, showed that VI had a better performance than the LF device. It was concluded that the Ekstrand’s visual system is more reliable than the LF device. LF should be considered only as an adjuvant for occlusal caries diagnosis.A redução da prevalência de cáries não ocorreu uniformemente para todas as superfícies dentárias. Como as superfícies oclusais ainda são as mais susceptíveis ao desenvolvimento de lesões, novos métodos de diagnóstico ainda estão sendo avaliados. Este estudo comparou um sistema de fluorescência a laser (DIAGNOdent - DD com o método visual de Ekstrand na detecção de cárie oclusal. Um total de 57 terceiros molares com superfícies oclusais macroscopicamente intactas foram selecionados. Dois examinadores examinaram 110 sítios por inspecção visual (IV e DD. Após dez dias da primeira mensuração, todos os dentes foram novamente

  4. Organic and inorganic ion exchangers as catalysts for the heterogeneous alkylation of aromatics

    Energy Technology Data Exchange (ETDEWEB)

    Klein, J; Widdecke, H [Technische Univ. Braunschweig (Germany, F.R.). Inst. fuer Chemische Technologie

    1979-06-01

    Ion exchangers have advantages over low molecular for use in industrial alkylation reactions. The reactivity and selectivity behaviour of the polymeric catalysts was found to be markedly influenced by the structure of the polymeric matrix as well as the type and number of the functional groups. In this connection many similarities between inorganic ion exchangers (zeolites) and organic ion exchange resins were detected.

  5. Present art of reactivity determination

    International Nuclear Information System (INIS)

    Kaneko, Yoshihiko; Nakano, Masafumi; Matsuura, Shojiro

    1977-01-01

    Experimental techniques for reactivity determination of a reactor have been one of the long standing subjects in reactor physics. Recently, such a requirement was proposed by the reactor designers and operators that the values of reactivity should be measured more accurately. This is because importance is emphasized for the role of reactivity to the performance of reactor safety, economics and operability. Motivated by the requirement, some remarkable progresses are being made for the improvement of the experimental techniques. Then, the present review summarizes the research activities on this subject, identifies several reactor physics problems to be overcome, and makes mention of the future targets. (auth.)

  6. Menina mulher da pele preta - projeto de série televisiva que discute questões de gênero e raça ligados a mulher negra

    OpenAIRE

    Renato Candido de Lima

    2011-01-01

    Esta dissertação em mestrado consiste na construção dramatúrgica de um projeto de série televisiva que dialoga questões de gênero e raça atrelados a representação da pessoa negra no audiovisual brasileiro. \\"Menina Mulher da Pele Preta\\" é o nome desta série e ela desenvolve cinco histórias de cinco mulheres negras protagonistas de diferentes idades com suas cinco diferentes realidades sociais e contextos. Seu título dialoga com a música \\"Essa Menina Mulher da Pele Preta\\" composta pelo cant...

  7. Les montagnes et la montée des clercs dans l’Algérie coloniale. Viticulture, montagnes et réformisme (iṣlāḥ aux xixe-xxe siècles

    Directory of Open Access Journals (Sweden)

    Kamel Chachoua

    2014-09-01

    Full Text Available Les études des sciences humaines et sociales sur la religion en Algérie se sont toujours concentrées sur les rôles et les fonctions des acteurs emblématiques (saints, réformateurs et des institutions anciennes ou modernes (confréries, médersas, écoles publiques dans une sorte de « fonctionnalisme du pire et/ou du meilleur ». Partant de l’exemple du mouvement réformiste musulman algérien, l’iṣlāḥ (renaissance, naḥḍa en Égypte, souvent présenté comme un mouvement « citadin », « petit-bourgeois » et essentiellement « arabophone », ce texte montre, qu’au contraire, les ulémas fondateurs et promoteurs du mouvement réformiste algérien sont presque tous originaires des montagnes de l’Est, berbérophones, d’origine sociale modeste, prématurément orphelins. Aussi, et pour rendre compte de ces spécificités bio-géographique et politique du mouvement réformiste algérien, ce texte revient sur l’histoire de la viticulture en Algérie qui a, dès 1880, scindée l’Algérie en deux. À l’Ouest, une Algérie des plaines viticoles, une Algérie dite « province européenne », et à l’Est une Algérie des montagnes, une Algérie musulmane qui, par une sorte de « conservatisme révolutionnaire », deviendra le terrain du mouvement réformiste (iṣlāḥ et de la lutte indépendantiste.

  8. Les institucions. El Consell de Garanties Estatutàries: drets sense garanties? - Instituciones. El Consejo de Garantías Estatutarias: ¿derechos sin garantías?

    Directory of Open Access Journals (Sweden)

    Joan Vintró

    2010-07-01

    Full Text Available El Consell de Garanties Estatutàries (181-184Joaquín Tornos MasEls dictàmens vinculants del Consell de Garanties Estatutàries (185-190Joan Vintró CastellsEl Consejo de Garantías Estatutarias (181-184Joaquín Tornos MasLos dictámenes vinculantes del Consejo de Garantías Estatutarias (185-190Joan Vintró Castells

  9. Validade da autopercepção da presença de cárie dentária como teste diagnóstico e fatores associados entre adultos

    Directory of Open Access Journals (Sweden)

    Desirée Sant’Ana Haikal

    2017-08-01

    Full Text Available Resumo: Objetivou-se investigar a validade da autopercepção da presença da cárie dentária e fatores associados, mediante estudo com 795 adultos (35-44 anos. A variável dependente foi autopercepção da presença da cárie dentária, as independentes reunidas em blocos. Três modelos logísticos foram conduzidos: (1 todos os adultos; (2 adultos com lesões de cárie normativa; e (3 adultos sem tais lesões. A autopercepção da presença da cárie dentária apresentou sensibilidade de 77,7%, especificidade de 58%, acurácia de 65%, valor preditivo positivo de 52% e valor preditivo negativo de 81%. No Modelo 1, a autopercepção da presença da cárie dentária foi associada ao tempo de uso dos serviços odontológicos, acesso à informação, uso de fio dental, lesões normativas, percepção da necessidade de tratamento, dor, insatisfação com a saúde bucal e geral. No Modelo 2, a autopercepção da presença da cárie dentária foi associada ao tempo de uso dos serviços odontológicos, percepção da necessidade de tratamento e insatisfação com a saúde bucal e geral. No Modelo 3, autopercepção da presença da cárie dentária foi associada ao tempo de uso dos serviços odontológicos, acesso à informação, percepção da necessidade de tratamento, insatisfação com a saúde bucal e uso de fio dental. A autopercepção da presença da cárie dentária mostrou utilidade limitada como método de diagnóstico.

  10. Homogenous and heterogenous advanced oxidation of two commercial reactive dyes.

    Science.gov (United States)

    Balcioglu, I A; Arslan, I; Sacan, M T

    2001-07-01

    Two commercial reactive dyes, the azo dye Reactive Black 5 and the copper phythalocyanine dye Reactive Blue 21, have been treated at a concentration of 75 mg l(-1) by titanium dioxide mediated photocatalytic (TiO2/UV), dark and UV-light assisted Fenton (Fe2+/H2O2) and Fenton-like (Fe3+/H2O2) processes in acidic medium. For the treatment of Reactive Black 5, all investigated advanced oxidation processes were quite effective in terms of colour, COD as well as TOC removal. Moreover, the relative growth inhibition of the azo dye towards the marine algae Dunaliella tertiolecta that was initially 70%, did not exhibit an increase during the studied advanced oxidation reactions and complete detoxification at the end of the treatment period could be achieved for all investigated treatment processes. However, for Reactive Blue 21, abatement in COD and UV-VIS absorbance values was mainly due to the adsorption of the dye on the photocatalyst surface and/or the coagulative effect of Fe3+/Fe2+ ions. Although only a limited fraction of the copper phythalocyanine dye underwent oxidative degradation, 47% of the total copper in the dye was already released after 1 h photocatalytic treatment.

  11. Effet de la nature des ions alcalins et alcalino-terreux sur la structure d'un verre riche en terre

    OpenAIRE

    Quintas , Arnaud; Lenoir , Marion; Caurant , D.; Majérus , Odile; Dussossoy , Jean-Luc; Charpentier , Thibault; Neuville , Daniel R.; Gervais , Christel

    2006-01-01

    Dans le cadre d'une étude structurale d'un verre de confinement de déchets nucléaires de type aluminoborosilicate et riche en terres rares, l'influence de la nature des ions alcalins ou alcalino-terreux est analysée. Pour cela deux séries de verres ont été élaborées dans lesquelles l'ion Na+ (respectivement l'ion Ca2+) présent dans la composition de référence, est totalement substitué par un autre ion alcalin Li+, K+, Rb+ ou Cs+ (respectivement un autre ion alcalino-terreux Mg2+, Sr2+ ou Ba2+...

  12. Ion channeling

    International Nuclear Information System (INIS)

    Erramli, H.; Blondiaux, G.

    1994-01-01

    Channeling phenomenon was predicted, many years ago, by stark. The first channeling experiments were performed in 1963 by Davies and his coworkers. Parallely Robinson and Oen have investigated this process by simulating trajectories of ions in monocrystals. This technique has been combined with many methods like Rutherford Backscattering Spectrometry (R.B.S.), Particles Induced X-rays Emission (P.I.X.E) and online Nuclear Reaction (N.R.A.) to localize trace elements in the crystal or to determine crystalline quality. To use channeling for material characterization we need data about the stopping power of the incident particle in the channeled direction. The ratios of channeled to random stopping powers of silicon for irradiation in the direction have been investigated and compared to the available theoretical results. We describe few applications of ion channeling in the field of materials characterization. Special attention is given to ion channeling combined with Charged Particle Activation Analysis (C.P.A.A.) for studying the behaviour of oxygen atoms in Czochralski silicon lattices under the influence of internal gettering and in different gaseous atmospheres. Association between ion channeling and C.P.A.A was also utilised for studying the influence of the growing conditions on concentration and position of carbon atoms at trace levels in the MOVPE Ga sub (1-x) Al sub x lattice. 6 figs., 1 tab., 32 refs. (author)

  13. Ion source

    International Nuclear Information System (INIS)

    1977-01-01

    The specifications of a set of point-shape electrodes of non-corrodable material that can hold a film of liquid material of equal thickness is described. Contained in a jacket, this set forms an ion source. The electrode is made of tungsten with a glassy carbon layer for insulation and an outer layer of aluminium-oxide ceramic material

  14. Processing of polymers using reactive solvents

    NARCIS (Netherlands)

    Lemstra, P.J.; Kurja, J.; Meijer, H.E.H.; Meijer, H.E.H.

    1997-01-01

    A review with many refs. on processing of polymers using reactive solvents including classification of synthetic polymers, guidelines for the selection of reactive solvents, basic aspects of processing, examples of intractable and tractable polymer/reactive solvent system

  15. Reactive Collision Avoidance Algorithm

    Science.gov (United States)

    Scharf, Daniel; Acikmese, Behcet; Ploen, Scott; Hadaegh, Fred

    2010-01-01

    The reactive collision avoidance (RCA) algorithm allows a spacecraft to find a fuel-optimal trajectory for avoiding an arbitrary number of colliding spacecraft in real time while accounting for acceleration limits. In addition to spacecraft, the technology can be used for vehicles that can accelerate in any direction, such as helicopters and submersibles. In contrast to existing, passive algorithms that simultaneously design trajectories for a cluster of vehicles working to achieve a common goal, RCA is implemented onboard spacecraft only when an imminent collision is detected, and then plans a collision avoidance maneuver for only that host vehicle, thus preventing a collision in an off-nominal situation for which passive algorithms cannot. An example scenario for such a situation might be when a spacecraft in the cluster is approaching another one, but enters safe mode and begins to drift. Functionally, the RCA detects colliding spacecraft, plans an evasion trajectory by solving the Evasion Trajectory Problem (ETP), and then recovers after the collision is avoided. A direct optimization approach was used to develop the algorithm so it can run in real time. In this innovation, a parameterized class of avoidance trajectories is specified, and then the optimal trajectory is found by searching over the parameters. The class of trajectories is selected as bang-off-bang as motivated by optimal control theory. That is, an avoiding spacecraft first applies full acceleration in a constant direction, then coasts, and finally applies full acceleration to stop. The parameter optimization problem can be solved offline and stored as a look-up table of values. Using a look-up table allows the algorithm to run in real time. Given a colliding spacecraft, the properties of the collision geometry serve as indices of the look-up table that gives the optimal trajectory. For multiple colliding spacecraft, the set of trajectories that avoid all spacecraft is rapidly searched on

  16. Mannuronic Acids : Reactivity and Selectivity

    NARCIS (Netherlands)

    Codee, Jeroen D. C.; Walvoort, Marthe T. C.; de Jong, Ana-Rae; Lodder, Gerrit; Overkleeft, Herman S.; van der Marel, Gijsbert A.

    2011-01-01

    This review describes our recent studies toward the reactivity and selectivity of mannopyranosyl uronic acid donors, which have been found to be very powerful donors for the construction of beta-mannosidic linkages.

  17. Fuel Temperature Coefficient of Reactivity

    Energy Technology Data Exchange (ETDEWEB)

    Loewe, W.E.

    2001-07-31

    A method for measuring the fuel temperature coefficient of reactivity in a heterogeneous nuclear reactor is presented. The method, which is used during normal operation, requires that calibrated control rods be oscillated in a special way at a high reactor power level. The value of the fuel temperature coefficient of reactivity is found from the measured flux responses to these oscillations. Application of the method in a Savannah River reactor charged with natural uranium is discussed.

  18. [Hyper-reactive malarial splenomegaly].

    Science.gov (United States)

    Maazoun, F; Deschamps, O; Barros-Kogel, E; Ngwem, E; Fauchet, N; Buffet, P; Froissart, A

    2015-11-01

    Hyper-reactive malarial splenomegaly is a rare and severe form of chronic malaria. This condition is a common cause of splenomegaly in endemic areas. The pathophysiology of hyper-reactive malarial splenomegaly involves an intense immune reaction (predominantly B cell-driven) to repeated/chronic infections with Plasmodium sp. The diagnosis may be difficult, due to a poorly specific clinical presentation (splenomegaly, fatigue, cytopenias), a long delay between residence in a malaria-endemic area and onset of symptoms, and a frequent absence of parasites on conventional thin and thick blood smears. A strongly contributive laboratory parameter is the presence of high levels of total immunoglobulin M. When the diagnostic of hyper-reactive malarial splenomegaly is considered, search for anti-Plasmodium antibodies and Plasmodium nucleic acids (genus and species) by PCR is useful. Diagnosis of hyper-reactive malarial splenomegaly relies on the simultaneous presence of epidemiological, clinical, biological and follow-up findings. Regression of both splenomegaly and hypersplenism following antimalarial therapy allows the differential diagnosis with splenic lymphoma, a common complication of hyper-reactive malarial splenomegaly. Although rare in Western countries, hyper-reactive malarial splenomegaly deserves increased medical awareness to reduce the incidence of incorrect diagnosis, to prevent progression to splenic lymphoma and to avoid splenectomy. Copyright © 2015 Société nationale française de médecine interne (SNFMI). Published by Elsevier SAS. All rights reserved.

  19. Particle beam experiments for the analysis of reactive sputtering processes in metals and polymer surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Corbella, Carles; Grosse-Kreul, Simon; Kreiter, Oliver; Arcos, Teresa de los; Benedikt, Jan; Keudell, Achim von [RD Plasmas with Complex Interactions, Ruhr-Universität Bochum, Universitätsstr. 150, 44780 Bochum (Germany)

    2013-10-15

    A beam experiment is presented to study heterogeneous reactions relevant to plasma-surface interactions in reactive sputtering applications. Atom and ion sources are focused onto the sample to expose it to quantified beams of oxygen, nitrogen, hydrogen, noble gas ions, and metal vapor. The heterogeneous surface processes are monitored in situ by means of a quartz crystal microbalance and Fourier transform infrared spectroscopy. Two examples illustrate the capabilities of the particle beam setup: oxidation and nitriding of aluminum as a model of target poisoning during reactive magnetron sputtering, and plasma pre-treatment of polymers (PET, PP)

  20. Ion-ion collisions and ion storage rings

    International Nuclear Information System (INIS)

    Mowat, J.R.

    1988-01-01

    Improved understanding of fundamental ion-ion interactions is expected to emerge from research carried out with ion storage rings. In this short survey the significant advantages and unique features that make stored ions useful targets for collision experiments are reviewed and discussed. It is pointed out that improvements to existing ion-ion experiments, as well as qualitatively new experiments, should occur over the next few years as ion storage rings become available for atomic physics. Some new experiments are suggested which are difficult if not impossible with present-day technology, but which seem feasible at storage rings facilities. (orig.)

  1. Compreensão textual em alunos de segunda e terceira séries: uma abordagem cognitiva Text comprehension in second and third graders: a cognitive approach

    Directory of Open Access Journals (Sweden)

    Jerusa Fumagalli de Salles

    2004-04-01

    Full Text Available Este estudo teve como objetivo analisar a compreensão de leitura textual de alunos de 2ª e 3ª séries. Participaram 76 crianças, com média de idade de 8,1 anos. Cada criança lia a história, recontava-a e, posteriormente, respondia a questões. Os recontos foram analisados segundo o Modelo de Compreensão Textual de Kintsch & van Dijk (1978 e Kintsch (1988, 1998. A amostra relatou, em média, 21,07% da estrutura proposicional da história, sendo mais freqüente o relato de macroproposições. Alunos da terceira série foram superiores aos da segunda série no relato de microproposições menos relevantes do texto e em responder a questões pontuais sobre a história. Foi encontrada uma correlação significativa entre idade e o reconto da macroestrutura textual. Os resultados sugerem que durante os primeiros anos de escolarização ocorreu uma melhora da memorização de detalhes, enquanto que a retenção das idéias essenciais foi influenciada pelas variações de idade das crianças.This study aimed to analyze text comprehension of students of the 2nd and 3rd grades. The sample was constituted by 76 children, at an average of 8.1 years old. Each child read the story, retold it and, afterwards, answered questions about it. The retellings were analyzed according to the model of Text Comprehension of Kintsch and van Dijk (1978 and Kintsch (1988, 1998. The sample recalled a mean of 21.07% of the proposition structure of the story, being the report of macropropositions more frequent. Students of the third grade told larger percentage of irrelevant micropropositions of the text and they were superior in answering to specific questions than students of the second grade. A significant correlation was found between age and macroproposition's retelling. The results suggest that during the first years of schooling there is an improvement of the detail-remembering, whereas the retention of the essential ideas is influenced by age differences.

  2. A spatially-explicit count data regression for modeling the density of forest cockchafer (Melolontha hippocastani larvae in the Hessian Ried (Germany

    Directory of Open Access Journals (Sweden)

    Matthias Schmidt

    2014-10-01

    Full Text Available Background In this paper, a regression model for predicting the spatial distribution of forest cockchafer larvae in the Hessian Ried region (Germany is presented. The forest cockchafer, a native biotic pest, is a major cause of damage in forests in this region particularly during the regeneration phase. The model developed in this study is based on a systematic sample inventory of forest cockchafer larvae by excavation across the Hessian Ried. These forest cockchafer larvae data were characterized by excess zeros and overdispersion. Methods Using specific generalized additive regression models, different discrete distributions, including the Poisson, negative binomial and zero-inflated Poisson distributions, were compared. The methodology employed allowed the simultaneous estimation of non-linear model effects of causal covariates and, to account for spatial autocorrelation, of a 2-dimensional spatial trend function. In the validation of the models, both the Akaike information criterion (AIC and more detailed graphical procedures based on randomized quantile residuals were used. Results The negative binomial distribution was superior to the Poisson and the zero-inflated Poisson distributions, providing a near perfect fit to the data, which was proven in an extensive validation process. The causal predictors found to affect the density of larvae significantly were distance to water table and percentage of pure clay layer in the soil to a depth of 1 m. Model predictions showed that larva density increased with an increase in distance to the water table up to almost 4 m, after which it remained constant, and with a reduction in the percentage of pure clay layer. However this latter correlation was weak and requires further investigation. The 2-dimensional trend function indicated a strong spatial effect, and thus explained by far the highest proportion of variation in larva density. Conclusions As such the model can be used to support forest

  3. Reactive sites influence in PMMA oligomers reactivity: a DFT study

    Science.gov (United States)

    Paz, C. V.; Vásquez, S. R.; Flores, N.; García, L.; Rico, J. L.

    2018-01-01

    In this work, we present a theoretical study of methyl methacrylate (MMA) living anionic polymerization. The study was addressed to understanding two important experimental observations made for Michael Szwarc in 1956. The unexpected effect of reactive sites concentration in the propagation rate, and the self-killer behavior of MMA (deactivating of living anionic polymerization). The theoretical calculations were performed by density functional theory (DFT) to obtain the frontier molecular orbitals values. These values were used to calculate and analyze the chemical interaction descriptors in DFT-Koopmans’ theorem. As a result, it was observed that the longest chain-length species (related with low concentration of reactive sites) exhibit the highest reactivity (behavior associated with the increase of the propagation rate). The improvement in this reactivity was attributed to the crosslinking produced in the polymethyl methacrylate chains. Meanwhile, the self-killer behavior was associated with the intermolecular forces present in the reactive sites. This behavior was associated to an obstruction in solvation, since the active sites remained active through all propagation species. The theoretical results were in good agreement with the Szwarc experiments.

  4. Methanol conversion to hydrocarbons using modified clinoptilolite catalysts. Investigation of catalyst lifetime and reactivation

    Energy Technology Data Exchange (ETDEWEB)

    Hutchings, G J; Themistocleous, T; Copperthwaite, R G

    1988-10-17

    A study of the deactivation and reactivation of modified clinoptilolite catalysts for methanol conversion to hydrocarbons is reported. Clinoptilolite catalysts, modified by either ammonium ion exchange or hydrochloric acid treatment, exhibit a short useful catalyst lifetime for this reaction (ca. 2-3 h) due to a high rate of coke deposition (3-5.10/sup -3/ g carbon/g catalyst/h). A comparative study of reactivation using oxygen, nitrous oxide and ozone/oxygen as oxidants indicated that nitrous oxide reactivation gives improved catalytic performance when compared to the activity and lifetime of the fresh catalyst. Both oxygen and ozone/oxygen were found to be ineffective for the reactivation of clinoptilolite. Initial studies of in situ on-line reactivation are also described. 3 figs., 15 refs., 4 tabs.

  5. The pilot project RiesLing. An efficient automation and innovative control system functions for grids with an enhanced amount of decentralized power generation; Das Pilotprojekt RiesLing. Effiziente Automatisierung und innovative Leitsystemfunktionen fuer Netze mit hohem Anteil an dezentraler Erzeugung

    Energy Technology Data Exchange (ETDEWEB)

    Backes, Juergen; Jaeger, Thomas [EnBW Ostwuerttemberg Donau-Ries AG, Ellwangen (Germany); Bader, Daniel [EnBW Netzgesellschaft Ostwuerttemberg Donauries GmbH, Ellwangen (Germany); Koerner, Christian [EnBW Regional AG, Stuttgart (Germany); Kaempfer, Stefan; Kautsch, Stephan [ABB AG, Mannheim (Germany)

    2012-07-01

    The challenges imposed by the political target of an increased share of renewables in electrical energy supply are being broadly discussed. The vision is the Smart Grid - the intelligent energy system. By means of communication and information technology it seems possible to coordinate the control of the grid infrastructure as well as the power consumed or produced by the customers' facilities in a way that allows a safe and secure operation minimizing cost and providing a sustainable supply. The project RiesLing (Projekt im Ries - Leittechnik intelligent gemacht, translated ''implementation of an intelligent grid control in the Ries area'') focuses on the development and the practical test of solutions which are considered core components of a Smart Grid. The region of its implementation is the Noerdlinger Ries, a region in the north-western part of Bavaria and in close vicinity to the federal state of Baden-Wuerttemberg. This area combines a maximum load of around 50 MW with a maximum generation of around 120 MW, mostly from Photovoltaic modules and biogas fuelled engines. The RiesLing project has been initiated in mid 2011. Its technical implementation, set up as 3 separate packages, will be finished until end of 2012. The implementation phase will be followed by a practical test phase to optimize the technical solution and to derive practical operation experience. The project thus will end by December 2013. The technical packages (TP) 1 and 2 are dealing with technical solutions for online-monitoring and remote operation of medium voltage (MV)/low voltage (LV) transformer substations. The solutions tested cover upgrading existing substations as well as renewal of MV switchgear. One of these substations integrates an electronic voltage regulation based on a series transformer (''boost transformer'') connected to an electronic converter. TP 3 takes advantage of the technical infrastructure implemented in TP 1 and TP 2

  6. Ksenia Pimenova, Les sources de savoirs. Le renouveau du bouddhisme et du chamanisme chez les Touvas de la Sibérie du Sud

    OpenAIRE

    Pimenova, Ksenia

    2013-01-01

    Cette thèse présente une étude comparative du « renouveau » post-soviétique du chamanisme et du bouddhisme tibétain (école Guélougpa) chez les Touvas, un des peuples autochtones de la Sibérie du Sud (Russie). Ce phénomène a lieu après des décennies de politique antireligieuse (dès la fin des années 1920 jusqu’aux années 1980) ayant abouti à la destruction de la communauté bouddhique et à la marginalisation du chamanisme. Nous analysons le chamanisme et le bouddhisme post-soviétiques comme deu...

  7. Regeneració i homeòstasi a les planàries: gens i vies de senyalització implicats en l'organogènesi

    OpenAIRE

    González Sastre, Alejandro

    2017-01-01

    [cat] En aquesta tesi, titulada “Regeneració i homeòstasi a les planàries: gens i vies de senyalització implicats en l'organogènesi”, s’aprofundeix en l’estudi dels processos responsables de l’organogènesi a la planària d’aigua dolça Schmidtea mediterranea, tant durant la regeneració com durant l’homeòstasi. La planària d’aigua dolça Schmidtea mediterranea presenta una extraordinària capacitat de regeneració, gràcies a la presència d’una elevada quantitat de cèl·lules mare, els neoblasts, qu...

  8. Double Emittance Exchanger as a Bunch Compressor for the MaRIE XFEL electron beam line at 1GeV

    Energy Technology Data Exchange (ETDEWEB)

    Malyzhenkov, Alexander [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Northern Illinois Univ., DeKalb, IL (United States); Yampolsky, Nikolai [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Carlsten, Bruce Eric [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-09-22

    We demonstrate an alternative realization of a bunch compressor (specifically the second bunch compressor for the MaRIE XFEL beamline, 1GeV electron energy) using a double emittance exchanger (EEX) and a telescope in the transverse phase space.We compare our results with a traditional bunch compressor realized via chicane, taking into account the nonlinear dynamics, Coherent Synchrotron Radiation (CSR) and Space Charge (SC) effects. In particular, we use the Elegant code for tracking particles through the beam line and analyze the eigen-emittances evolution to separate the influence of the CSR/SC effects from the nonlinear dynamics effects. We optimize the scheme parameters to reach a desirable compression factor and minimize the emittance growth. We observe dominant CSR-effects in our scheme resulting in critical emittance growth and introduce alternative version of an emittance exchanger with a reduced number of bending magnets to minimize the impact of CSR effects.

  9. L'Atlantide dans la série Stargate Atlantis (2004-2009) : un mythe remodelé par les valeurs spirituelles contemporaines

    OpenAIRE

    Lachance, Élisa

    2011-01-01

    Depuis Platon, l'Atlantide n'a pas cessé de fasciner et a toujours représenté un terrain fertile pour l'imaginaire. Le mythe a été repris, recomposé et remodelé de multiples manières, de la théosophie de Mme Blavatsky jusqu'aux spiritualités contemporaines. Ce n'est donc pas un hasard si la télésérie Stargate Atlantis s'en inspire directement en l'adaptant à la mentalité d'aujourd'hui. On y raconte qu'il y a 10 000 ans, les Anciens auraient quitté l'Atlantide pour revenir sur Terre. La menace...

  10. Resultados da Intervenção da Fisioterapia após Ligamentoplastia do LCA: Estudo Série de Casos

    OpenAIRE

    Bonança, Daniela; Almeida, Isabel Bastos de; Cruz, Eduardo

    2013-01-01

    Introdução: A literatura sugere que o sucesso da ligamentoplastia do LCA está directamente relacionado com a reabilitação após cirurgia, permitindo ao utente o retorno a um estilo de vida activo. Objectivo: Descrever os resultados da intervenção da fisioterapia, às 6, 12 e 24 semanas, em indivíduos após ligamentoplastia do LCA. Metodologia: Realizou-se um estudo série de casos, com uma amostra não probabilística, constituída por 14 utentes (34 ± 11,92 anos) que cumpriam os critéri...

  11. Les écritures féminines de la guerre d’Algérie : L’exemple de Maïssa Bey

    Directory of Open Access Journals (Sweden)

    Khédidja Mokaddem

    2009-03-01

    Full Text Available L'histoire de la guerre d'Algérie que l'on ne peut pas encore mettre à distance, parce que les acteurs et les témoins sont encore là, ils sont porteurs de la mémoire et ils peuvent raconter, témoigner, cette histoire est encore prisonnière de passions encore vivaces, douloureuses le plus souvent. Cette histoire, suspecte de partialité parce qu'elle ne peut occulter les affects, beaucoup d'auteurs ont voulu la restituer, certains dans le cadre du simple témoignage, d'autres pour alimenter des récits « en contexte », nourris de souvenirs personnels ou d'autres récits.

  12. Modelització de la biodiversitat d'espècies mitjançant la sèrie geomètrica

    OpenAIRE

    Ventura Ripoll, Oriol

    2016-01-01

    La sèrie geomètrica és un model molt utilitzat en estudis de diversitat d'espècies. L'objectiu principal d'aquest treball és el d'investigar i comparar diferents estimadors del paràmetre del model geomètric. Primer es fa una introducció de la biodiversitat, i es presenten les gràfiques més utilitzades per representar les dades. S'introdueixen, també, els models més populars en aquest camp. Seguidament, el treball se centra en el model geomètric, i es presenten sis estimadors diferents del par...

  13. Modélisation d'un système de séchage solaire du tabac en Algérie

    OpenAIRE

    Benaouda , Nour-Eddine; Belhamel , Maiouf

    2007-01-01

    International audience; L'étude a porté sur la contribution théorique du bilan d'énergie d'un système de séchage convectif des produits en feuilles. Dans ce travail, nous nous intéressons aux aspects énergétiques d'un système solaire de séchage. Le but visé par ce présent travail est l'étude de l'influence des différents paramètres entrant en jeu dans le séchage du tabac par voie solaire en Algérie.

  14. A importância do xilitol na prevenção da cárie dentária

    OpenAIRE

    Sousa, Ana Marta Crespo de

    2014-01-01

    Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Medicina Dentária A cárie dentária é uma doença infeciosa crónica, transmissível, de origem bacteriana que conduz à desmineralização progressiva dos tecidos duros dentários. A sua etiologia é multifatorial, existindo fatores etiológicos primários, isto é, essenciais para que a doença se desenvolva; e fatores etiológicos secundários que, embora não sej...

  15. rie precoce e severa na infância: uma abordagem integral Severe early childhood caries: an integral approach

    Directory of Open Access Journals (Sweden)

    Estela M. Losso

    2009-08-01

    Full Text Available OBJETIVO: Fornecer informações para auxiliar o médico pediatra a reconhecer os fatores de risco para o início da cárie precoce na infância e da cárie severa na infância (CSI, possibilitando a intervenção precoce de tais fatores, e, assim, evitar a instalação dessa doença prevenível e as suas consequências. FONTES DOS DADOS: As informações foram coletadas a partir de artigos científicos publicados nas bases de dados SciELO, MEDLINE e PUBMED nos últimos 25 anos, livros técnicos e publicações de consenso de organismos internacionais. As palavras-chave utilizadas foram: early childhood caries, severe early childhood caries, dental caries e children. SÍNTESE DOS DADOS: A CSI é uma forma de cárie dentária que afeta bebês e crianças. É infecciosa, de etiologia multifatorial e de desenvolvimento rápido, iniciando logo após a erupção dos dentes. Por apresentar fatores de risco local e sociocultural, deve ser considerada como sintoma de uma alteração na criança e de falta de cuidados adequados. Suas manifestações incluem dor, abscessos e dificuldades mastigatórias, afetando a alimentação e o sono da criança. Além disso, afeta também sua saúde geral, fala e autoestima. CONCLUSÕES: A CSI é uma doença com métodos preventivos estabelecidos, que devem ser introduzidos o mais precocemente possível, por meio de programas preventivos na comunidade e no núcleo familiar. Os profissionais que atendem bebês e crianças devem estar atentos aos casos com risco para o desenvolvimento da doença cárie e interceder a fim de se obter saúde.OBJECTIVE: To provide information with the purpose of helping pediatricians to recognize the risk factors for the onset of severe early childhood caries, allowing for early intervention and thus avoiding this preventable disease and its consequences. SOURCES: Information was collected from scientific articles published on the databases SciELO, MEDLINE and PUBMED in last 25 years, as

  16. Por uma ficção autoconsciente: a transposição do romance Dom Casmurro para a minisérie Capitu

    Directory of Open Access Journals (Sweden)

    Cristiane Passafaro Guzzi

    Full Text Available O artigo discute a possibilidade de leitura de duas tradições nos romances, uma realista e outra autoconsciente, as quais se norteiam pelo modo como o gênero romanesco interpretou o conceito de verossimilhança ao longo de sua história. Tal percurso de reflexão possibilitou um estudo da minissérie televisiva Capitu (2008, de Luiz Fernando Carvalho - transposição, essa, da obra Dom Casmurro -, que levou em consideração, também, em seu processo, uma expressa autoconsciência dos mecanismos reflexivos empregados na obra machadiana, mas mobilizados, agora, pelos procedimentos específicos do novo suporte.

  17. A influência da memória operacional nas habilidades de compreensão de leitura em escolares de 4ª série

    OpenAIRE

    Giangiacomo, Micheli Cristina Paludeto Belaz; Navas, Ana Luiza Gomes Pinto

    2008-01-01

    OBJETIVOS: Investigar o papel da memória verbal e não-verbal, e do vocabulário expressivo na compreensão de leitura; avaliar as habilidades de memória e vocabulário em um grupo de crianças da 4ª série em relação ao desempenho de compreensão de leitura. MÉTODOS: Participaram do estudo 15 crianças com idades entre 9;11 anos e 11;4 anos. As crianças não possuíam queixas de perda auditiva, visual e/ou alterações neurológicas. Todos os sujeitos foram submetidos individualmente às avaliações de des...

  18. POSIÇÃO DO CÓDIGO PENAL NOS CRIMES COMETIDOS POR ASSASSINOS EM SÉRIE, CONSIDERANDO, OU NÃO, SUA PSICOPATIA

    Directory of Open Access Journals (Sweden)

    Sarah Carolina Amaral Souza

    2016-12-01

    Full Text Available Atualmente, o assunto “serial killers” tem tomado conta de muitas séries de televisão, filmes e reportagens. Contudo, as informações sobre este tema apresentam equívocos e imperfeições. Este artigo visa, por um lado, caracterizar este grupo, diferenciando um psicopata de um psicótico. Por outro lado, discute sobre a aplicação de pena privativa de liberdade ou medida de segurança (Título V - art. 33 ao 42 e art. 96 ao 99, respectivamente, do Código Penal - Decreto-lei nº 2.848/1940, a partir do momento em que há conhecimento do estado de saúde mental do indivíduo acusado de ser um “serial killer”.

  19. Tendências de tradução de mexicanismos em roteiros e episódios das séries televisivas Chaves e Chapolin

    OpenAIRE

    Santos, Orlanda Miranda

    2013-01-01

    Tese (doutorado) - Universidade Federal de Santa Catarina, Centro de Comunicação e Expressão, Programa de Pós-Graduação em Estudos da Tradução, Florianópolis, 2013. Esta pesquisa, por um lado, teve o objetivo de identificar tendências de tradução de mexicanismos em roteiros das séries Chaves e Chapolin, criadas na década de 70, no México, exibidas pela rede Televisa, traduções essas feitas por acadêmicos de Letras Espanhol. Teve por fim analisar episódios retraduzidos pela equipe de dublag...

  20. Reactive Strength Index: A Poor Indicator of Reactive Strength?

    Science.gov (United States)

    Healy, Robin; Kenny, Ian; Harrison, Drew

    2017-11-28

    The primary aim was to assess the relationships between reactive strength measures and associated kinematic and kinetic performance variables achieved during drop jumps. A secondary aim was to highlight issues with the use of reactive strength measures as performance indicators. Twenty eight national and international level sprinters, consisting of fourteen men and women, participated in this cross-sectional analysis. Athletes performed drop jumps from a 0.3 m box onto a force platform with dependent variables contact time (CT), landing time (TLand), push-off time (TPush), flight time (FT), jump height (JH), reactive strength index (RSI, calculated as JH / CT), reactive strength ratio (RSR, calculated as FT / CT) and vertical leg spring stiffness (Kvert) recorded. Pearson's correlation test found very high to near perfect relationships between RSI and RSR (r = 0.91 to 0.97), with mixed relationships found between RSI, RSR and the key performance variables, (Men: r = -0.86 to -0.71 between RSI/RSR and CT, r = 0.80 to 0.92 between RSI/RSR and JH; Women: r = -0.85 to -0.56 between RSR and CT, r = 0.71 between RSI and JH). This study demonstrates that the method of assessing reactive strength (RSI versus RSR) may be influenced by the performance strategies adopted i.e. whether an athlete achieves their best reactive strength scores via low CTs, high JHs or a combination. Coaches are advised to limit the variability in performance strategies by implementing upper and / or lower CT thresholds to accurately compare performances between individuals.

  1. Photoionization and ion cyclotron resonance studies of the ion chemistry of ethylene oxide

    Science.gov (United States)

    Corderman, R. R.; Williamson, A. D.; Lebreton, P. R.; Buttrill, S. E., Jr.; Beauchamp, J. L.

    1976-01-01

    The formation of the ethylene oxide molecular ion and its subsequent ion-molecule reactions leading to the products C2H5O(+) and C3H5O(+) have been studied using time-resolved photoionization mass spectroscopy, ion cyclotron resonance spectroscopy, and photoelectron spectroscopy. An examination of the effects of internal energy on reactivity shows that the ratio of C3H5O(+) to C2H5O(+) increases by an order of magnitude with a single quantum of vibrational energy. The formation of (C2H4O/+/)-asterisk in a collision-induced isomerization is found which yields a ring-opened structure by C-C bond cleavage. The relaxed ring-opened C2H4O(+) ion reacts with neutral ethylene oxide by CH2(+) transfer to yield an intermediate product ion C3H6O(+) which gives C3H5O(+) by loss of H.

  2. PREVALÊNCIA DA DOENÇA CÁRIE E PERIODONTAL EM ADOLESCENTES DE UMA ESCOLA DA REDE PARTICULAR DE QUIXADÁ-CE

    Directory of Open Access Journals (Sweden)

    Anielly Sampaio Barros

    2015-06-01

    Full Text Available É crescente a preocupação de realizar trabalhos sobre obtenção e manutenção da condição da saúde bucal de adolescentes, visto que estes não possuem disciplina ao controle de açúcar na dieta e higiene bucal. O objetivo desse estudo foi avaliar a prevalência de cárie dentária e doença periodontal em adolescentes de uma escola da rede particular do município de Quixadá-Ceará. Trata-se de um estudo do tipo quantitativo, transversal, de caráter descritivo, onde participaram 31 alunos que cursavam o Ensino Médio de uma escola particular, na faixa etária de 14 e 15 anos. Os dados foram coletados a partir de um questionário estruturado e de exames clínicos como odontograma e índice de Sangramento Gengival (ISG realizados por uma única examinadora previamente calibrada. Os dados foram tabulados no Microsoft Excel 2010 e apresentados em forma de gráficos. O resultado da média do índice de dentes Cariados, Perdidos e Obturados (CPO-D os adolescentes foi 3,0 (três, sendo classificado como moderado de acordo com a Organização Mundial de Saúde e o ISG mostrou-se relativamente saudável. Neste estudo, 68% dos participantes alegaram que fazem escovação diária de 3 a 4 vezes por dia e 61% consomem alimentos cariogênicos entre as refeições. Concluiu-se que a prevalência de doença cárie ainda é preocupante para este grupo e a prevalência da doença periodontal foi baixa.

  3. Casos e Arbitrariedade no Sistema de Escrita do Português: Dados de 8ª Série em Discussão

    Directory of Open Access Journals (Sweden)

    Cristiano Egger Veçossi

    2010-09-01

    Full Text Available Neste artigo, o qual é parte da dissertação de mestrado do autor, intitulada “A interferência da fala na escrita de alunos de 8. série de uma escola pública: desdobramentos”, tratamos dos erros de escrita denominados por Zorzi (1998 como “Alterações ou erros decorrentes das possibilidades de representações múltiplas”, isto é, ocorrências nas quais o aprendiz da escrita erra em virtude de escolher, para representar determinado fonema, um grafema possível, mas que não  o eleito pelo sistema ortográfico da língua. Na análise dos dados, partimos de um corpus de textos produzidos por alunos pertencentes a duas turmas de 8. série de uma escola pública estadual do município de Santa Maria-RS. Além de analisar as ocorrências com possibilidades de representações múltiplas, enfocamos, dentre os dados, os casos nos quais o conhecimento de uma regra contextual (de natureza morfológica ou não, por parte do aprendiz, poderia ter evitado o erro. Os resultados apontam principalmente que, na maior parte das ocorrências analisadas, o conhecimento de regularidades de cunho contextual/morfológico teria garantido a grafia correta dos itens lexicais, ou então, ao menos, teria diminuído o número de opções possíveis para se grafar determinado fonema, o que, da mesma forma, facilitaria o trabalho do aprendiz da escrita na difícil tarefa de escolher um grafema para representar o fonema pretendido.

  4. Metodologia das Pesquisas Populacionais de Saúde Materno-Infantil: uma série transversal realizada no Estado do Ceará de 1987 a 2007

    Directory of Open Access Journals (Sweden)

    Luciano Lima Correia

    2014-12-01

    Full Text Available Objectivo: descrever os métodos utilizados nas Pesquisas de Saúde Materno-Infantil (PESMIC no Ceará, durante 20 anos. Métodos: a série de inquéritos realizados no período de 20 anos foi analisada nos seguintes aspectos: a Estudos transversais em série de base populacional, com amostra representativa de 8000 famílias; b Utilizou-se questionários e medições antropométricas, estudando-se níveis e causas de mortalidade infantil, prevalência de desnutrição da mãe e da criança, duração da amamentação, cobertura vacinal, prevalência e manejo da diarreia e acesso aos serviços de saúde materno-infantil; c Obteve-se como resultado as variáveis desfechos (principal mortalidade infantil e diversos determinantes materno-infantis e socioeconómicos. Resultados: o índice de resposta foi de quase 100% nos cinco inquéritos realizados (1986-2007, e ocorreram importantes mudanças nos indicadores sociodemográficos e de saúde; redução de 81% da taxa de mortalidade infantil, aumento de 43% da taxa de amamentação; índice de imunização de 95%. Observou-se aumento de 243% do índice de sobrepeso. Foram entrevistados no total somado dos cinco estudos: 177.132 residentes, sendo 47.508 mulheres e 13.049 crianças. Conclusões: recomenda-se a continuidade desses estudos utilizando-se a mesma metodologia, possibilitando analises de variações temporais.

  5. Efeito da prática de alimentação infantil e de fatores associados sobre a ocorrência da cárie dental em pré-escolares de 18 a 48 meses

    Directory of Open Access Journals (Sweden)

    SAITO Solange Katia

    1999-01-01

    Full Text Available Este estudo foi realizado objetivando estudar o efeito das práticas de alimentação infantil e de fatores associados sobre a ocorrência de cárie dental. Para isso, determinou-se o ceo-d e o ceo-s em 156 crianças de 18 a 48 meses e foi aplicado às mães um questionário incluindo perguntas sobre a ocupação do pai, nível educacional da mãe, higiene bucal, época de erupção do dente e sobre práticas de alimentação infantil. Os dados obtidos foram analisados através dos testes X2 e Mann-Whitney U. A média do ceo-s foi 3,4 com 40% das crianças livres de cáries, sendo que 36 e 24% tinham um ceo-d maior que 0 e 4, respectivamente. Notou-se que 72% das crianças eram alimentadas ao seio, 17% apenas com mamadeira e 10% pelos dois meios. Das crianças alimentadas apenas com mamadeira 70% apresentaram cárie. A cárie de mamadeira foi observada em 20% das crianças, sendo que 77% destas tinham sido alimentadas por mais de 12 meses. As crianças, cujos pais eram profissionais com terceiro grau de escolaridade, tiveram significativamente menos cárie do que aquelas de pais com nível técnico ou pais operários. A prevalência de cárie na faixa etária estudada foi relativamente alta. As crianças com cárie de mamadeira tenderam a manter seus hábitos de aleitamento por mais de 12 meses, sendo que o uso de mamadeira açucarada estava presente em 100% dos casos.

  6. Biodecolorization and biodegradation of Reactive Blue by ...

    African Journals Online (AJOL)

    SERVER

    2007-06-18

    Jun 18, 2007 ... Aspergillus sp. effectively decolorized Reactive Blue and other structurally different synthetic dyes. Agitation was found to be an important ... Few chemically different dyes such as Reactive Black (75%), Reactive Yellow (70%),. Reactive Red (33%) and ..... Degradation of azo dyes by the lignin degrading ...

  7. Substation Reactive Power Regulation Strategy

    Science.gov (United States)

    Zhang, Junfeng; Zhang, Chunwang; Ma, Daqing

    2018-01-01

    With the increasing requirements on the power supply quality and reliability of distribution network, voltage and reactive power regulation of substations has become one of the indispensable ways to ensure voltage quality and reactive power balance and to improve the economy and reliability of distribution network. Therefore, it is a general concern of the current power workers and operators that what kind of flexible and effective control method should be used to adjust the on-load tap-changer (OLTC) transformer and shunt compensation capacitor in a substation to achieve reactive power balance in situ, improve voltage pass rate, increase power factor and reduce active power loss. In this paper, based on the traditional nine-zone diagram and combining with the characteristics of substation, a fuzzy variable-center nine-zone diagram control method is proposed and used to make a comprehensive regulation of substation voltage and reactive power. Through the calculation and simulation of the example, this method is proved to have satisfactorily reconciled the contradiction between reactive power and voltage in real-time control and achieved the basic goal of real-time control of the substation, providing a reference value to the practical application of the substation real-time control method.

  8. Ion Beam Extraction by Discrete Ion Focusing

    DEFF Research Database (Denmark)

    2010-01-01

    An apparatus (900) and methods are disclosed for ion beam extraction. In an implementation, the apparatus includes a plasma source (or plasma) (802) and an ion extractor (804). The plasma source is adapted to generate ions and the ion extractor is immersed in the plasma source to extract a fracti...

  9. Excitation of Ion Cyclotron Waves by Ion and Electron Beams in Compensated-current System

    Science.gov (United States)

    Xiang, L.; Wu, D. J.; Chen, L.

    2018-04-01

    Ion cyclotron waves (ICWs) can play important roles in the energization of plasma particles. Charged particle beams are ubiquitous in space, and astrophysical plasmas and can effectively lead to the generation of ICWs. Based on linear kinetic theory, we consider the excitation of ICWs by ion and electron beams in a compensated-current system. We also investigate the competition between reactive and kinetic instabilities. The results show that ion and electron beams both are capable of generating ICWs. For ICWs driven by ion beams, there is a critical beam velocity, v bi c , and critical wavenumber, k z c , for a fixed beam density; the reactive instability dominates the growth of ICWs when the ion-beam velocity {v}{bi}> {v}{bi}c and the wavenumber {k}zz≃ 2{k}zc/3 for a given {v}{bi}> {v}{bi}c. For the slow ion beams with {v}{bi}< {v}{bi}c, the kinetic instability can provide important growth rates of ICWs. On the other hand, ICWs driven by electron beams are excited only by the reactive instability, but require a critical velocity, {v}{be}c\\gg {v}{{A}} (the Alfvén velocity). In addition, the comparison between the approximate analytical results based on the kinetic theory and the exact numerical calculation based on the fluid model demonstrates that the reactive instabilities can well agree quantitatively with the numerical results by the fluid model. Finally, some possible applications of the present results to ICWs observed in the solar wind are briefly discussed.

  10. The reactivity of natural phenols

    Energy Technology Data Exchange (ETDEWEB)

    Denisov, Evgenii T; Denisova, Taisa G [Institute of Problems of Chemical Physics, Russian Academy of Sciences, Chernogolovka, Moscow Region (Russian Federation)

    2009-11-30

    This review surveys physicochemical data of natural phenols published in recent years. The structures of some compounds of this class are given. A complete set of the dissociation energies of the O-H bonds for 71 natural phenols is presented. Kinetic characteristics of the reactions of peroxyl, alkyl and thiyl radicals with natural phenols, exchange reactions of phenoxyl radicals with phenols and reactions of phenoxyl radicals with lipids, hydroperoxides, cysteine and ascorbic acid are compiled and described systematically. The reactivity of phenols in radical reactions and the factors that determine the reactivity (the enthalpy of reaction, triplet repulsion, the electronegativities of atoms at the reaction centre, the presence of pi-electrons adjacent to the reaction centre, the radii of atoms at the reaction centre, steric hindrance, the force constants of the reacting bonds) are discussed. An important role of hydrogen bonding between surrounding molecules and the OH groups of natural phenols in decreasing their reactivities is noted.

  11. Treatment of dyeing wastewater including reactive dyes (Reactive ...

    African Journals Online (AJOL)

    Fungal growth was not observed at pH 2. Maximum fungal decolourisation ocurred at pH 3 for anionic reactive dyes (RR, RBB, RB) and pH 6 for cationic MB dye. The fungal dye bioremoval was associated with the surface charge of the fungus due to electrostatic interactions. Growing R. arrhizus strain decolourised 100% of ...

  12. Memory reactivation improves visual perception.

    Science.gov (United States)

    Amar-Halpert, Rotem; Laor-Maayany, Rony; Nemni, Shlomi; Rosenblatt, Jonathan D; Censor, Nitzan

    2017-10-01

    Human perception thresholds can improve through learning. Here we report findings challenging the fundamental 'practice makes perfect' basis of procedural learning theory, showing that brief reactivations of encoded visual memories are sufficient to improve perceptual discrimination thresholds. Learning was comparable to standard practice-induced learning and was not due to short training per se, nor to an epiphenomenon of primed retrieval enhancement. The results demonstrate that basic perceptual functions can be substantially improved by memory reactivation, supporting a new account of perceptual learning dynamics.

  13. ION GUN

    Science.gov (United States)

    Dandl, R.A.

    1961-10-24

    An ion gun is described for the production of an electrically neutral ionized plasma. The ion gun comprises an anode and a cathode mounted in concentric relationship with a narrow annulus between. The facing surfaces of the rear portions of the anode and cathode are recessed to form an annular manifold. Positioned within this manifold is an annular intermediate electrode aligned with the an nulus between the anode and cathode. Gas is fed to the manifold and an arc discharge is established between the anode and cathode. The gas is then withdrawn from the manifold through the annulus between the anode and cathode by a pressure differential. The gas is then ionized by the arc discharge across the annulus. The ionized gas is withdrawn from the annulus by the combined effects of the pressure differential and a collimating magnetic field. In a 3000 gauss magnetic field, an arc voltage of 1800 volts, and an arc current of 0.2 amp, a plasma of about 3 x 10/sup 11/ particles/cc is obtained. (AEC)

  14. Heavy ions

    CERN Multimedia

    CERN. Geneva; Antinori, Federico

    2001-01-01

    Colliding two heavy nuclei at ultrarelativistic energies allows to create in the laboratory a bulk system with huge density, pressure and temperature and to study its properties. It is estimated that in Pb-Pb collisions at CERN-SPS we reach over an appreciable volume an energy density which exceeds by more than a factor 20 that of normal nuclear matter. At such densities, the hadrons are so closely packed that they interpenetrate; novel physics phenomena are expected to appear. QCD predicts that under such conditions a phase transition from a system composed of colourless hadrons to a Quark-Gluon Plasma (QGP) should occur. A rich ultrarelativistic heavy-ion physics programme is under way both at BNL-AGS and at CERN-SPS since 1986. The results obtained so far have led CERN to officially announce evidence for a new state of matter last year. A long-range programme of heavy-ion physics at higher energies is under way (BNL-RHIC) and in preparation (CERN-LHC). These lectures are meant as an introduction to the phy...

  15. Heavy ions

    CERN Multimedia

    CERN. Geneva. Audiovisual Unit

    2002-01-01

    Colliding two heavy nuclei at ultrarelativistic energies allows to create in the laboratory a bulk system with huge density, pressure and temperature and to study its properties. It is estimated that in Pb-Pb collisions at CERN-SPS we reach over an appreciable volume an energy density which exceeds by more than a factor 20 that of normal nuclear matter. At such densities, the hadrons are so closely packed that they interpenetrate; novel physics phenomena are expected to appear. QCD predicts that under such conditions a phase transition from a system composed of colourless hadrons to a Quark-Gluon Plasma (QGP) should occur. A rich ultrarelativistic heavy-ion physics programme is under way both at BNL-AGS and at CERN-SPS since 1986. The results obtained so far have led CERN to officially announce evidence for a new state of matter last year. A long-range programme of heavy-ion physics at higher energies is under way (BNL-RHIC) and in preparation (CERN-LHC). These lectures are meant as an introduction to the phy...

  16. Developments in broad-beam, ion-source technology and applications

    International Nuclear Information System (INIS)

    Kaufman, H.R.; Harper, J.M.E.; Cuomo, J.J.

    1982-01-01

    Recent advances in broad-beam, ion-source technology are summarized, including low-energy ion optics, improved extraction grid fabrication, a compact ion-source design and a gridless ion-source design. Recent applications have emphasized concepts such as stress modification of vapor deposited films, very low energy ion beams to minimize the physical sputtering portion in reactive etching, and the use of multiple sources and targets to sputter deposit alloys and compounds. A comprehensive critical review by the same authors appears concurrently, describing in detail the developments in broad-beam, ion-source technology 1 and the applications of these sources. 2

  17. The Importance of Protons in Reactive Transport Modeling

    Science.gov (United States)

    McNeece, C. J.; Hesse, M. A.

    2014-12-01

    The importance of pH in aqueous chemistry is evident; yet, its role in reactive transport is complex. Consider a column flow experiment through silica glass beads. Take the column to be saturated and flowing with solution of a distinct pH. An instantaneous change in the influent solution pH can yield a breakthrough curve with both a rarefaction and shock component (composite wave). This behavior is unique among aqueous ions in transport and is more complex than intuition would tell. Analysis of the hyperbolic limit of this physical system can explain these first order transport phenomenon. This analysis shows that transport behavior is heavily dependent on the shape of the adsorption isotherm. Hence it is clear that accurate surface chemistry models are important in reactive transport. The proton adsorption isotherm has nonconstant concavity due to the proton's ability to partition into hydroxide. An eigenvalue analysis shows that an inflection point in the adsorption isotherm allows the development of composite waves. We use electrostatic surface complexation models to calculate realistic proton adsorption isotherms. Surface characteristics such as specific surface area, and surface site density were determined experimentally. We validate the model by comparison against silica glass bead flow through experiments. When coupled to surface complexation models, the transport equation captures the timing and behavior of breakthrough curves markedly better than with commonly used Langmuir assumptions. Furthermore, we use the adsorption isotherm to predict, a priori, the transport behavior of protons across pH composition space. Expansion of the model to multicomponent systems shows that proton adsorption can force composite waves to develop in the breakthrough curves of ions that would not otherwise exhibit such behavior. Given the abundance of reactive surfaces in nature and the nonlinearity of chemical systems, we conclude that building a greater understanding of

  18. Effect of Fast Pyrolysis Conditions on Structural Transformation and Reactivity of Herbaceous Biomasses at High Temperatures

    DEFF Research Database (Denmark)

    Trubetskaya, Anna; Jensen, Anker D.; Jensen, Peter Arendt

    of organic and inorganic matter on the char structural transformations. The results indicate no influence of the free radicals on char reactivity and burnout. The formation of free radicals in fast pyrolysis is related to the differences in the ash composition, namely presence of K+ ions in the wheat straw...

  19. Electron transfer reactivity of the Arabidopsis thaliana sulfhydryl oxidase AtErv1

    DEFF Research Database (Denmark)

    Farver, Ole; Vitu, Elvira; Wherland, Scot

    2009-01-01

    The redox reactivity of the three disulfide bridges and the flavin present in each protomer of the wild-type Arabidopsis thaliana mitochondrial sulfhydryl oxidase (AtErv1) homodimer has been investigated. Pulse radiolytically produced CO2- radical ions were found to reduce the disulfide bridges...

  20. Radiolysis studies on reactive intermediates. Final report, February 1, 1970-August 31, 1980

    International Nuclear Information System (INIS)

    Kevan, L.

    1980-08-01

    Research highlights are briefly reviewed concerning studies of excess and solvated electrons, development of new electron spin resonance methods for maximizing the geometrical information about the surroundings of paramagnetic species in disordered systems, atom and ion solvation, and studies on other reactive intermediates. Titles of 155 research publications and 182 scientific talks presented on these areas are given

  1. Hydroxyl radical reactivity with diethylhydroxylamine

    International Nuclear Information System (INIS)

    Gorse, R.A. Jr.; Lii, R.R.; Saunders, B.B.

    1977-01-01

    Diethylhydroxylamine (DEHA) reacts with gas-phase hydroxyl radicals on every third collision, whereas the corresponding reaction in aqueous solution is considerably slower. The high gas-phase reactivity explains the predicted inhibitory effect of DEHA in atmospheric smog processes. Results from the studies in the aqueous phase are helpful in predicting the mechanism of the reaction of DEHA with hydroxyl radicals

  2. Backup passive reactivity shutdown systems

    International Nuclear Information System (INIS)

    Ashurko, Yu.M.; Kuznetsov, L.A.

    1996-01-01

    The paper reviews self-actuated shutdown systems (SASSs) for liquid metal-cooled fast reactors (LMFRs). Principles of operation are described, advantages and drawbacks analyzed, and prospects for application in advanced fast reactors examined. Ways to improve reactor self-protection via reactivity feedback amplification and related problems are discussed. (author). 9 refs, 12 figs

  3. Insertion material for controlling reactivity

    International Nuclear Information System (INIS)

    Baba, Iwao.

    1994-01-01

    Moderators and a group of suspended materials having substantially the same density as the moderator are sealed in a hollow rod vertically inserted to a fuel assembly. Specifically, the group of suspended materials is adapted to have a density changing stepwise from density of the moderator at the exit temperature of the reactor core to that at the inlet temperature of the reactor core. Reactivity is selectively controlled for a portion of high power and a portion of high reactivity by utilizing the density of the moderator and the distribution of the density. That is, if the power distribution is flat, the density of the moderators changes at a constant rate over the vertical direction of the reactor core and the suspended materials stay at a portion of the same density, to form a uniform distribution. Further, upon reactor shutdown, since the liquid temperature of the moderators is lowered and the density is increased, all of beads are collected at the upper portion to remove water at the upper portion of the reactor core of low burnup degree thereby selectively controlling the reactivity at a portion of high power and a portion of high reactivity. (N.H.)

  4. Treating water-reactive wastes

    International Nuclear Information System (INIS)

    Lussiez, G.W.

    1993-01-01

    Some compounds and elements, such as lithium hydride, magnesium, sodium, and calcium react violently with water to generate much heat and produce hydrogen. The hydrogen can ignite or even form an explosive mixture with air. Other metals may react rapidly only if they are finely divided. Some of the waste produced at Los Alamos National Laboratory includes these metals that are contaminated with radioactivity. By far the greatest volume of water-reactive waste is lithium hydride contaminated with depleted uranium. Reactivity of the water-reactive wastes is neutralized with an atmosphere of humid nitrogen, which prevents the formation of an explosive mixture of hydrogen and air. When we adjust the temperature of the nitrogen and the humidifier, the nitrogen can be more or less humid, and the rate of reaction can be adjusted and controlled. Los Alamos has investigated the rates of reaction of lithium hydride as a function of the temperature and humidity, and, as anticipated, they in with in temperature and humidity. Los Alamos will investigate other variables. For example, the nitrogen flow will be optimized to conserve nitrogen and yet keep the reaction rates high. Reaction rates will be determined for various forms of lithium waste, from small chips to powder. Bench work will lead to the design of a skid-mounted process for treating wastes. Other water-reactive wastes will also be investigated

  5. Reactive surfactants in heterophase polymerization

    NARCIS (Netherlands)

    Guyot, A.; Tauer, K.; Asua, J.M.; Es, van J.J.G.S.; Gauthier, C.; Hellgren, A.C.; Sherrington, D.C.; Montoya-Goni, A.; Sjöberg, M.; Sindt, O.; Vidal, F.F.M.; Unzue, M.; Schoonbrood, H.A.S.; Schipper, E.T.W.M.; Lacroix-Desmazes, P.

    1999-01-01

    This paper summarizes the work carried out during 3 years in a Network of the program "Human Capital and Mobility" of the European Union CHRX 93-0159 entitled "Reactive surfactants in heterophase polymerization for high performance polymers". A series of about 25 original papers will be published in

  6. Backup passive reactivity shutdown systems

    Energy Technology Data Exchange (ETDEWEB)

    Ashurko, Yu M; Kuznetsov, L A [Institute of Physics and Power Engineering, Obninsk (Russian Federation)

    1996-12-01

    The paper reviews self-actuated shutdown systems (SASSs) for liquid metal-cooled fast reactors (LMFRs). Principles of operation are described, advantages and drawbacks analyzed, and prospects for application in advanced fast reactors examined. Ways to improve reactor self-protection via reactivity feedback amplification and related problems are discussed. (author). 9 refs, 12 figs.

  7. Quantitative reactive modeling and verification.

    Science.gov (United States)

    Henzinger, Thomas A

    Formal verification aims to improve the quality of software by detecting errors before they do harm. At the basis of formal verification is the logical notion of correctness , which purports to capture whether or not a program behaves as desired. We suggest that the boolean partition of software into correct and incorrect programs falls short of the practical need to assess the behavior of software in a more nuanced fashion against multiple criteria. We therefore propose to introduce quantitative fitness measures for programs, specifically for measuring the function, performance, and robustness of reactive programs such as concurrent processes. This article describes the goals of the ERC Advanced Investigator Project QUAREM. The project aims to build and evaluate a theory of quantitative fitness measures for reactive models. Such a theory must strive to obtain quantitative generalizations of the paradigms that have been success stories in qualitative reactive modeling, such as compositionality, property-preserving abstraction and abstraction refinement, model checking, and synthesis. The theory will be evaluated not only in the context of software and hardware engineering, but also in the context of systems biology. In particular, we will use the quantitative reactive models and fitness measures developed in this project for testing hypotheses about the mechanisms behind data from biological experiments.

  8. Separability of local reactivity descriptors

    Indian Academy of Sciences (India)

    Unknown

    Abstract. The size-dependence of different local reactivity descriptors of dimer A2 and AB type of sys- tems is discussed. We derive analytic results of these descriptors calculated using finite difference approximation. In particular, we studied Fukui functions, relative electrophilicity and relative nucleo- philicity, local softness ...

  9. Análise de séries temporais em epidemiologia: uma introdução sobre os aspectos metodológicos Time series analysis in epidemiology: an introduction to methodological aspects

    Directory of Open Access Journals (Sweden)

    Maria do Rosário Dias de Oliveira Latorre

    2001-11-01

    Full Text Available Este é um artigo introdutório sobre análise de séries temporais, onde se pretende apresentar, de maneira sumária, alguns modelos estatísticos mais utilizados em análise de séries temporais . Uma série temporal, também denominada série histórica, é uma seqüência de dados obtidos em intervalos regulares de tempo durante um período específico. Na análise de uma série temporal, primeiramente deseja-se modelar o fenômeno estudado para, a partir daí, descrever o comportamento da série, fazer estimativas e, por último, avaliar quais os fatores que influenciaram o comportamento da série, buscando definir relações de causa e efeito entre duas ou mais séries. Para tanto, há um conjunto de técnicas estatísticas disponíveis que dependem do modelo definido (ou estimado para a série, bem como do tipo de série analisada e do objetivo do trabalho. Para analise de tendências, podem se ajustar modelos de regressão polinomial baseados na série inteira ou em vizinhança de um determinado ponto. Isso também pode ser realizado com funções matemáticas. Define-se como um fenômeno sazonal aquele que ocorre regularmente em períodos fixos de tempo e, se existir sazonalidade dita determinística na série, podem-se utilizar modelos de regressão que incorporem funções do tipo seno ou cosseno à variável tempo. Os modelos auto-regressivos formam outra classe de modelos. Na análise do comportamento de uma série histórica livre de tendência e de sazonalidade podem ser utilizados modelos auto-regressivos (AR ou que incorporem médias móveis (ARMA. Quando há tendência, utilizam-se os modelos auto-regressivos integrados de médias móveis (ARIMA e, para incorporar o componente de sazonalidade, utilizam-se os modelos SARIMA. Por último há os modelos lineares generalizados. Neste grupo de modelos estatísticos, a variável resposta é um processo de contagem e as variáveis independentes são variáveis candidatas a explicar o

  10. First kinetic discrimination between carbon and oxygen reactivity of enols.

    Science.gov (United States)

    García-Río, Luis; Mejuto, Juan C; Parajó, Mercedes; Pérez-Lorenzo, Moisés

    2008-11-07

    Nitrosation of enols shows a well-differentiated behavior depending on whether the reaction proceeds through the carbon (nucleophilic catalysis is observed) or the oxygen atom (general acid-base catalysis is observed). This is due to the different operating mechanisms for C- and O-nitrosation. Nitrosation of acetylacetone (AcAc) shows a simultaneous nucleophilic and acid-base catalysis. This simultaneous catalysis constitutes the first kinetic evidence of two independent reactions on the carbon and oxygen atom of an enol. The following kinetic study allows us to determine the rate constants for both reaction pathways. A similar reactivity of the nucleophilic centers with the nitrosonium ion is observed.

  11. Rare-earth-ion-doped Al2O3 waveguides for active integrated optical devices

    NARCIS (Netherlands)

    Bradley, J.; Ay, F.; Blauwendraat, Tom; Worhoff, Kerstin; Pollnau, Markus; Orlovic, Valentin A.; Panchenko, Vladislav; Scherbakov, Ivan A.

    2007-01-01

    Reactively co-sputtered amorphous $Al_2O_3$ waveguide layers with low propagation losses have been deposited. In order to define channel waveguides in such $Al_2O_3$ films, the etching behaviour of $Al_2O_3$ has been investigated using an inductively coupled reactive ion etch system. The etch rate

  12. Phase equilibria in chemical reactive fluid mixtures

    International Nuclear Information System (INIS)

    Maurer, Gerd

    2011-01-01

    Downstream processing is a major part of nearly all processes in the chemical industries. Most separation processes in the chemical (and related) industries for fluid mixtures are based on phase equilibrium phenomena. The majority of separation processes can be modelled assuming that chemical reactions are of no (or very minor) importance, i.e., assuming that the overall speciation remains unchanged during a separation process. However, there are also a large number of industrially important processes where the thermodynamic properties are influenced by chemical reactions. The phase equilibrium of chemical reactive mixtures has been a major research area of the author's group over nearly 40 years. In this contribution, three examples from that research are discussed. The first example deals with the vapour phase dimerisation of carboxylic acids and its consequences on phase equilibrium phenomena and phase equilibrium predictions. The second example deals with the solubility of sour gases (e.g., carbon dioxide and sulfur dioxide) in aqueous solutions of ammonia. That topic has been of interest for many years, e.g., in relation with the gasification and liquefaction of coal and, more recently, with the removal of carbon dioxide from flue gas in the 'chilled ammonia process'. The third example deals with phase equilibrium phenomena in aqueous solutions of polyelectrolytes. It deals with the phenomenon of 'counter ion condensation' and methods to model the Gibbs free energy of such solutions.

  13. Amine reactivity with charged sulfuric acid clusters

    Directory of Open Access Journals (Sweden)

    B. R. Bzdek

    2011-08-01

    Full Text Available The distribution of charged species produced by electrospray of an ammonium sulfate solution in both positive and negative polarities is examined using Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS. Positively-charged ammonium bisulfate cluster composition differs significantly from negatively-charged cluster composition. For positively-charged clusters all sulfuric acid is neutralized to bisulfate, whereas for negatively-charged clusters the degree of sulfuric acid neutralization is cluster size-dependent. With increasing cluster size (and, therefore, a decreasing role of charge, both positively- and negatively-charged cluster compositions converge toward ammonium bisulfate. The reactivity of negatively-charged sulfuric acid-ammonia clusters with dimethylamine and ammonia is also investigated by FTICR-MS. Two series of negatively-charged clusters are investigated: [(HSO4(H2SO4x] and [(NH4x(HSO4x+1(H2SO43]. Dimethylamine substitution for ammonia in [(NH4 x(HSO4 x+1(H2SO43] clusters is nearly collision-limited, and subsequent addition of dimethylamine to neutralize H2SO4 to bisulfate is within one order of magnitude of the substitution rate. Dimethylamine addition to [(HSO4 (H2SO4 x] clusters is either not observed or very slow. The results of this study indicate that amine chemistry will be evident and important only in large ambient negative ions (>m/z 400, whereas amine chemistry may be evident in small ambient positive ions. Addition of ammonia to unneutralized clusters occurs at a rate that is ~2–3 orders of magnitude slower than incorporation of dimethylamine either by substitution or addition

  14. Ion beam monitoring

    International Nuclear Information System (INIS)

    McKinney, C.R.

    1980-01-01

    An ion beam analyzer is specified, having an ion source for generating ions of a sample to be analyzed, means for extracting the sample ions, means for focusing the sample ions into a beam, separation means positioned along the ion beam for selectively deflecting species of ions, and means for detecting the selected species of ions. According to the specification, the analyzer further comprises (a) means for disabling at least a portion of the separation means, such that the ion beam from the source remains undeflected; (b) means located along the path of the undeflected ion beam for sensing the sample ions; and (c) enabling means responsive to the sensing means for automatically re-enabling the separation means when the sample ions reach a predetermined intensity level. (author)

  15. Implications for behavior of volatile elements during impacts—Zinc and copper systematics in sediments from the Ries impact structure and central European tektites

    Science.gov (United States)

    Rodovská, Zuzana; Magna, TomáÅ.¡; Žák, Karel; Kato, Chizu; Savage, Paul S.; Moynier, Frédéric; Skála, Roman; Ježek, Josef

    2017-10-01

    Moldavites are tektites genetically related to the Ries impact structure, located in Central Europe, but the source materials and the processes related to the chemical fractionation of moldavites are not fully constrained. To further understand moldavite genesis, the Cu and Zn abundances and isotope compositions were measured in a suite of tektites from four different substrewn fields (South Bohemia, Moravia, Cheb Basin, Lusatia) and chemically diverse sediments from the surroundings of the Ries impact structure. Moldavites are slightly depleted in Zn ( 10-20%) and distinctly depleted in Cu (>90%) relative to supposed sedimentary precursors. Moreover, the moldavites show a wide range in δ66Zn values between 1.7 and 3.7‰ (relative to JMC 3-0749 Lyon) and δ65Cu values between 1.6 and 12.5‰ (relative to NIST SRM 976) and are thus enriched in heavy isotopes relative to their possible parent sedimentary sources (δ66Zn = -0.07 to +0.64‰; δ65Cu = -0.4 to +0.7‰). In particular, the Cheb Basin moldavites show some of the highest δ65Cu values (up to 12.5‰) ever observed in natural samples. The relative magnitude of isotope fractionation for Cu and Zn seen here is opposite to oxygen-poor environments such as the Moon where Zn is significantly more isotopically fractionated than Cu. One possibility is that monovalent Cu diffuses faster than divalent Zn in the reduced melt and diffusion will not affect the extent of Zn isotope fractionation. These observations imply that the capability of forming a redox environment may aid in volatilizing some elements, accompanied by isotope fractionation, during the impact process. The greater extent of elemental depletion, coupled with isotope fractionation of more refractory Cu relative to Zn, may also hinge on the presence of carbonyl species of transition metals and electromagnetic charge, which could exist in the impact-induced high-velocity jet of vapor and melts.

  16. Encodage et décodage des récits historiques. Un cas : la série Le Canada, une histoire populaire

    Directory of Open Access Journals (Sweden)

    Olivier Côté

    2011-04-01

    Full Text Available Fruit de l’investigation du fonds de la division documentaire de la CBC et du fonds Ramsay Cook, cet article étudie la circulation des récits historiques dans la société canadienne à travers l’analyse de la production de la série Le Canada, une histoire populaire (encodage du récit, de la dynamique radio-canadienne entre journalistes et historiens, et du décodage du récit de la série par les téléspectateurs qui ont envoyé des courriels à la CBC. Cette étude montre que, malgré l’articulation de récits minoritaires régionaux, culturels et professionnels, les récits du nation-building canadien et du pluralisme s’imposent à cause de la force persuasive des acteurs sociaux qui les portent et surtout parce qu’ils font davantage consonance avec l’imaginaire social des Canadiens, qu’ils soient producteurs de ce nouveau récit télévisuel ou téléspectateurs.This article, based on the investigation of the CBC documentary archives and of the fond Ramsay Cook , examines the circulation of historical narratives within Canadian society through the analysis of the context of production of the TV series Canada: A People’s History – what we call ‘narrative encoding’ –, the study of the dynamics between CBC’s journalists and historians, and the decoding of this ‘encoded’ historical narrative by TV viewers who sent their e-mails to the CBC. Despite the very presence of counter narratives within the production and reception contexts, may it be regional, cultural or professional, pluralism and ‘nation-building’ master narratives remain hegemonic because of the persuasive force of social actors who strongly support their diffusion, and especially because these narratives are closely related to the social imaginary of most Canadians, either producers of this historical narrative made for the television age or viewers.

  17. O desenvolvimento do texto dissertativo em crianças da 4ª série The development of argumentative text by fourth grade children

    Directory of Open Access Journals (Sweden)

    Sérgio Antonio da Silva Leite

    2000-03-01

    Full Text Available Esta pesquisa analisa o desenvolvimento da habilidade de produzir textos dissertativos em crianças da 4ª. série, relacionando com o contexto em que foram produzidos. Este estudo justifica-se devido à escassez de trabalhos lingüísticos na área, bem como ao alto índice de fracasso dos alunos nesta modalidade de texto. Coletou-se a produção escrita de crianças de rede pública, durante um período de três meses. O material foi analisado buscando-se identificar os operadores argumentativos, os tipos de argumentos utilizados e o estágio da capacidade argumentativa dessas crianças. O estudo sugere que a introdução do texto argumentativo nas séries iniciais do 1º grau, além de proporcionar mais chances de sucesso aos alunos na produção deste tipo de texto ao término do 2º grau, certamente facilitará o desenvolvimento de uma postura crítica, possibilitando aos alunos refletirem sobre a realidade social onde vivem.This reaserch analysed the developmental stage of fourth grade (primary school children in ability of writting argumentative texts joint with their context. The reason of this reaserch is the lack of new studies in linguistical area and high ratio of unable students to make this kind of text. It will be showed the analysis of making text by public schools children for three months. These data were analysed trying identify argumentative operators, the kinds of arguments used and the stage of the argumentative ability of these children. The study showed that the introduction of argumentative text in first grades give them more chances of succeed, preparing these pupils in their finishing high school. This fact obviously will make easier the development of their critical point of view, helping the students to think about their living social reality.

  18. Ensaios de variedades de amendoim: III - Décima e décima-primeira séries de ensaios Peanut variety trials: III

    Directory of Open Access Journals (Sweden)

    Vicente Canecchio Filho

    1957-01-01

    Full Text Available No presente trabalho são relatadas experiências com 16 variedades de amendoim (Arachis hypogaea, L., recebidas dos Estados Unidos da América do Norte, do Congo Belga e de várias regiões do Brasil. Essas experiências, em número de oito, das quais três pertencentes à décima série (ano agrícola de 1953/54 e cinco compreendendo a décima-primeira série (ano agrícola de 1954/55, foram executadas nas localidades de Campinas, Ribeirão Prêto, Pindorama, Presidente Prudente e Tatuí, no Estado de São Paulo. Os resultados obtidos mostraram que, para as condições em que foram realizados os ensaios, as variedades Paulista-269, Bandeirante-263, Brasília-265, Centenário-264 e Tatuí-76, sobressairam-se das demais, notadamente a primeira, que, de um modo geral, foi bem classificada em todas as localidades, não só em relação à produção como pelo alto teor em óleo, nos frutos. A variedade Tatu-53 (testemunha, ainda bastante cultivada no Estado, classificou-se entre as piores. As maiores produções foram obtidas em terra arenosa. Nas terras roxa e roxa-misturada, também se conseguiram boas produções. Já na região representada pela terra massapê as produções foram fracas, confirmando os resultados dos anos anteriores.This paper reports the results obtained from field tests with sexteen peanut varieties received from the United States of America, Belgium Congo and several Brazilian regions. Eight experiments were conducted in the following counties of the State of São Paulo: Campinas, Ribeirão Preto, Pindorama, Presidente Prudente and Tatuí. Yield data showed the varieties Paulista-269, Bandeirante-263, Brasilia-265, Centenário-264 and Tatui-76 to prove better, particularly the first one, that ranked good classification in every locality as far as seed production and oil content of the seeds are concerned. Variety Tatu-53 which still widespreads all over the State, was one of the least yielders. The highest yields were

  19. Dry Etch Black Silicon with Low Surface Damage: Effect of Low Capacitively Coupled Plasma Power

    DEFF Research Database (Denmark)

    Iandolo, Beniamino; Plakhotnyuk, Maksym; Gaudig, Maria

    2017-01-01

    Black silicon fabricated by reactive ion etch (RIE) is promising for integration into silicon solar cells thanks to its excellent light trapping ability. However, intensive ion bombardment during the RIE induces surface damage, which results in enhanced surface recombination velocity. Here, we pr...... carrier lifetime thanks to reduced ion energy. Surface passivation using atomic layer deposition of Al2O3 improves the effective lifetime to 7.5 ms and 0.8 ms for black silicon n- and p-type wafers, respectively.......Black silicon fabricated by reactive ion etch (RIE) is promising for integration into silicon solar cells thanks to its excellent light trapping ability. However, intensive ion bombardment during the RIE induces surface damage, which results in enhanced surface recombination velocity. Here, we...... present a RIE optimization leading to reduced surface damage while retaining excellent light trapping and low reflectivity. In particular, we demonstrate that the reduction of the capacitively coupled power during reactive ion etching preserves a reflectance below 1% and improves the effective minority...

  20. Engine combustion control via fuel reactivity stratification

    Science.gov (United States)

    Reitz, Rolf Deneys; Hanson, Reed M; Splitter, Derek A; Kokjohn, Sage L

    2013-12-31

    A compression ignition engine uses two or more fuel charges having two or more reactivities to control the timing and duration of combustion. In a preferred implementation, a lower-reactivity fuel charge is injected or otherwise introduced into the combustion chamber, preferably sufficiently early that it becomes at least substantially homogeneously dispersed within the chamber before a subsequent injection is made. One or more subsequent injections of higher-reactivity fuel charges are then made, and these preferably distribute the higher-reactivity matter within the lower-reactivity chamber space such that combustion begins in the higher-reactivity regions, and with the lower-reactivity regions following thereafter. By appropriately choose the reactivities of the charges, their relative amounts, and their timing, combustion can be tailored to achieve optimal power output (and thus fuel efficiency), at controlled temperatures (and thus controlled NOx), and with controlled equivalence ratios (and thus controlled soot).

  1. Reactive behavior, learning, and anticipation

    Science.gov (United States)

    Whitehead, Steven D.; Ballard, Dana H.

    1989-01-01

    Reactive systems always act, thinking only long enough to 'look up' the action to execute. Traditional planning systems think a lot, and act only after generating fairly precise plans. Each represents an endpoint on a spectrum. It is argued that primitive forms of reasoning, like anticipation, play an important role in reducing the cost of learning and that the decision to act or think should be based on the uncertainty associated with the utility of executing an action in a particular situation. An architecture for an adaptable reactive system is presented and it is shown how it can be augmented with a simple anticipation mechanism that can substantially reduce the cost and time of learning.

  2. Melioidosis: reactivation during radiation therapy

    International Nuclear Information System (INIS)

    Jegasothy, B.V.; Goslen, J.B.; Salvatore, M.A.

    1980-01-01

    Melioidosis is caused by Pseudomonas pseudomallei, a gram-negative, motile bacillus which is a naturally occurring soil saprophyte. The organism is endemic in Southeast Asia, the Philippines, Australia, and parts of Central and South America. Most human disease occurs from infection acquired in these countries. Infection with P pseudomallei may produce no apparent clinical disease. Acute pneumonitis or septicemia may result from inhalation of the organism, and inoculation into sites of trauma may cause localized skin abscesses, or the disease may remain latent and be reactivated months or years later by trauma, burns, or pneumococcal pneumonia, diabetic ketoacidosis, influenza, or bronchogenic carcinoma. The last is probably the commonest form of melioidosis seen in the United States. We present the first case of reactivation of melioidosis after radiation therapy for carcinoma of the lung, again emphasizing the need to consider melioidosis in a septic patient with a history of travel, especially to Southeast Asia

  3. Reactive polymer fused deposition manufacturing

    Science.gov (United States)

    Kunc, Vlastimil; Rios, Orlando; Love, Lonnie J.; Duty, Chad E.; Johs, Alexander

    2017-05-16

    Methods and compositions for additive manufacturing that include reactive or thermosetting polymers, such as urethanes and epoxies. The polymers are melted, partially cross-linked prior to the depositing, deposited to form a component object, solidified, and fully cross-linked. These polymers form networks of chemical bonds that span the deposited layers. Application of a directional electromagnetic field can be applied to aromatic polymers after deposition to align the polymers for improved bonding between the deposited layers.

  4. Sea sand for reactive barriers

    International Nuclear Information System (INIS)

    Garcia R, G.; Ordonez R, E.; Ordonez R, En.

    2002-01-01

    Some phosphates have the property to suck in radioactive metals in solution, what it is taken in advance to make reactive barriers which are placed in the nuclear waste repositories. In an effort for contributing to the study of this type of materials, it has been obtained the zirconium silicate (ZrSiO 4 ) and the alpha zirconium hydrogen phosphate (Zr(HPO 4 ) 2H 2 O) starting from sea sand in an easy and economic way. (Author)

  5. Reactive power supply by distributed generators

    OpenAIRE

    Braun, M.

    2008-01-01

    Distributed reactive power supply is necessary in distribution networks for an optimized network operation. This paper presents first the reactive power supply capabilities of generators connected to the distribution network (distributed generators). In a second step an approach is proposed of determining the energy losses resulting from reactive power supply by distributed generators. The costs for compensating these losses represent the operational costs of reactive power supply. These cost...

  6. Controlling material reactivity using architecture

    Science.gov (United States)

    Sullivan, Kyle

    2017-06-01

    The reactivity of thermites can be tailored through selection of several parameters, and can range from very slow burns to rapid deflagrations. 3D printing is a rapidly emerging field, and offers the potential to build architected parts. Here we sought to explore whether controlling such features could be a suitable path forward for gaining additional control of the reactivity. This talk discusses several new methods for preparing thermite samples with controlled architectures using 3D printing. Additionally, we demonstrate that the architecture can play a role in the reactivity of an object. Our results suggest that architecture can be used to tailor the convective and/or advective energy transport during a deflagration, thus enhancing or retarding the reaction. The results are promising in that they give researchers an additional way of controlling the energy release rate without defaulting to the conventional approach of changing the formulation. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract DE-AC52-07NA27344. LLNL-ABS-708525. In collaboration with: Cheng Zhu, Eric Duoss, Matt Durban, Alex Gash, Alexandra Golobic, Michael Grapes, David Kolesky, Joshua Kuntz, Jennifer Lewis, Christopher Spadaccini; LAWRENCE LIVERMORE NATIONAL LAB.

  7. Quadratic reactivity fuel cycle model

    International Nuclear Information System (INIS)

    Lewins, J.D.

    1985-01-01

    For educational purposes it is highly desirable to provide simple yet realistic models for fuel cycle and fuel economy. In particular, a lumped model without recourse to detailed spatial calculations would be very helpful in providing the student with a proper understanding of the purposes of fuel cycle calculations. A teaching model for fuel cycle studies based on a lumped model assuming the summability of partial reactivities with a linear dependence of reactivity usefully illustrates fuel utilization concepts. The linear burnup model does not satisfactorily represent natural enrichment reactors. A better model, showing the trend of initial plutonium production before subsequent fuel burnup and fission product generation, is a quadratic fit. The study of M-batch cycles, reloading 1/Mth of the core at end of cycle, is now complicated by nonlinear equations. A complete account of the asymptotic cycle for any order of M-batch refueling can be given and compared with the linear model. A complete account of the transient cycle can be obtained readily in the two-batch model and this exact solution would be useful in verifying numerical marching models. It is convenient to treat the parabolic fit rho = 1 - tau 2 as a special case of the general quadratic fit rho = 1 - C/sub tau/ - (1 - C)tau 2 in suitably normalized reactivity and cycle time units. The parabolic results are given in this paper

  8. Evaluation of bituminized waste reactivity

    International Nuclear Information System (INIS)

    Camaro, S.; Moulinier, D.

    2000-01-01

    The bituminization process has been used for conditioning low and medium level (LML) radioactive waste, particularly to immobilize coprecipitation slurries and evaporation concentrates generated by effluent treatment. The process consists in mixing bitumen matrix with inactive soluble and slightly soluble salts added to insolubilize the radionuclides or resulting from the neutralization of acid effluents. This operation is performed at a sufficient temperature - depending on waste composition and bitumen grade to ensure the flow of the resulting mixture into metal containers. Exothermicity due to salts/salts or salts/bitumen reactions depending on the type of waste can be induced during or after the mixing step. This could produce an additional heat emission that the drum must be able to release to avoid a potentially incidental pattern with ignition risk, explaining why the CEA has been involved in evaluating the thermal reactivity of bituminized waste and its repercussions on the bituminization process. Given the difficulty of discriminating each exothermal reaction, the characterization of a global reactivity appears as a further precautionary measure, in addition to the definition of a working safety margin. The CEA has accordingly developed studies on this aspect. The article discusses the experimental methodology developed for the determination of the global reactivity. (authors)

  9. Comprehensive Peptide Ion Structure Studies Using Ion Mobility Techniques: Part 3. Relating Solution-Phase to Gas-Phase Structures.

    Science.gov (United States)

    Kondalaji, Samaneh Ghassabi; Khakinejad, Mahdiar; Valentine, Stephen J

    2018-06-01

    Molecular dynamics (MD) simulations have been utilized to study peptide ion conformer establishment during the electrospray process. An explicit water model is used for nanodroplets containing a model peptide and hydronium ions. Simulations are conducted at 300 K for two different peptide ion charge configurations and for droplets containing varying numbers of hydronium ions. For all conditions, modeling has been performed until production of the gas-phase ions and the resultant conformers have been compared to proposed gas-phase structures. The latter species were obtained from previous studies in which in silico candidate structures were filtered according to ion mobility and hydrogen-deuterium exchange (HDX) reactivity matches. Results from the present study present three key findings namely (1) the evidence from ion production modeling supports previous structure refinement studies based on mobility and HDX reactivity matching, (2) the modeling of the electrospray process is significantly improved by utilizing initial droplets existing below but close to the calculated Rayleigh limit, and (3) peptide ions in the nanodroplets sample significantly different conformers than those in the bulk solution due to altered physicochemical properties of the solvent. Graphical Abstract ᅟ.

  10. Event-Based Modularization of Reactive Systems

    NARCIS (Netherlands)

    Malakuti Khah Olun Abadi, Somayeh; Aksit, Mehmet

    2014-01-01

    There is a large number of complex software systems that have reactive behavior. As for any other software system, reactive systems are subject to evolution demands. This paper defines a set requirements that must be fulfilled so that reuse of reactive software systems can be increased. Detailed

  11. L’île comme lieu de rédemption dans la télésérie américaine «Lost» (2004-2010)

    OpenAIRE

    Brouard, Élise

    2015-01-01

    Les téléséries ont connu un essor au début des années 2000. Lost, créée en 2004 par J.J. Abrams, Jefrey Lieber et Damon Lindelof, marque un tournant quant aux possibilités du format télévisuel. Avec une structure narrative complexe, dense et riche, la série présente des personnages brisés par leur passé qui se retrouvent sur une île semblant déserte après l’écrasement de l’avion dans lequel ils prenaient place. Leur destin et leur cheminement personnel respectif sont au cœur de l’intrigue. Da...

  12. Microfluidic systems with ion-selective membranes.

    Science.gov (United States)

    Slouka, Zdenek; Senapati, Satyajyoti; Chang, Hsueh-Chia

    2014-01-01

    When integrated into microfluidic chips, ion-selective nanoporous polymer and solid-state membranes can be used for on-chip pumping, pH actuation, analyte concentration, molecular separation, reactive mixing, and molecular sensing. They offer numerous functionalities and are hence superior to paper-based devices for point-of-care biochips, with only slightly more investment in fabrication and material costs required. In this review, we first discuss the fundamentals of several nonequilibrium ion current phenomena associated with ion-selective membranes, many of them revealed by studies with fabricated single nanochannels/nanopores. We then focus on how the plethora of phenomena has been applied for transport, separation, concentration, and detection of biomolecules on biochips.

  13. Recoil ion spectroscopy with heavy ions

    International Nuclear Information System (INIS)

    Beyer, H.F.; Mann, R.

    1984-01-01

    This chapter examines the production of very high charge state ions in single ion-atom collisions. Topics considered include some aspects of highly ionized atoms, experimental approaches, the production of highly charged target ions (monoatomic targets, recoil energy distribution, molecular fragmentation, outer-shell rearrangement, lifetime measurements, a comparison of projectile-, target-, and plasma-ion stripping), and secondary collision experiments (selective electron capture, potential applications). The heavy-ion beams for the described experiments were provided by accelerators such as tandem Van de Graaff facility and the UNILAC

  14. Curva de estimativa das internações hospitalares nas regiões metropolitanas brasileiras: um estudo de série histórica

    Directory of Open Access Journals (Sweden)

    Graziella Denúbila Gomes

    2012-03-01

    Full Text Available O objetivo deste estudo foi investigar as variações temporais na distribuição das internações hospitalares realizadas no Sistema Único de Saúde (SUS em todas as Regiões Metropolitanas brasileiras entre os anos de 1995 e 2006. Trata-se de estudo ecológico de série histórica com dados secundários referentes às 36 regiões metropolitanas brasileiras. Realizou-se a análise descritiva dos dados, correlação de Spearman e curva de estimativa. Os resultados indicam que o Teste F foi significativo em ordem decrescente para os modelos linear (p=0,001, quadrático (p=0,002 e cúbico (p=0,004. Por outro lado, os valores de R2 apresentaram ordem crescente de valores – 0,277; 0,307 e 0,338, respectivamente. O modelo cúbico mostrou que o percentual médio de internações hospitalares em 2006 apresentou tendência de queda quando comparado ao percentual médio de internações no ano de 1995. Conclui-se que o percentual de internações hospitalares realizadas no SUS nas regiões metropolitanas brasileiras decresceu durante o período analisado.

  15. A captura de Dom Casmurro por uma crítica disposta entre o romance e a microssérie

    Directory of Open Access Journals (Sweden)

    Alexandre de Assis Monteiro

    2016-09-01

    Full Text Available Esta reflexão tem o intuito de identificar as formas de diálogos entre a microssérie Capitu, de Luís Fernando Carvalho e o romance Dom Casmurro, de Machado de Assis, e está fundamentada na teoria da narratologia - sobretudo a partir das contribuições de Gérard Genette. Para substanciar nosso estudo acerca da natureza das narrativas, fazemos uma abordagem dos textos com base na fortuna crítica das duas obras, além de buscarmos apreender os sentidos da imagem e do tempo sobre a teleficção, sobre o processo de adaptação e sobre os movimentos artísticos da modernidade, que encontram reflexo no percurso da transmutação da narrativa de um suporte radicado no código verbal para um suporte radicado num código verbal-visual-sonoro.

  16. Mineralogia dos solos da série taquaral na estação experimental "Teodureto de Camargo" Mineralogical studies on soils of the taquaral series

    Directory of Open Access Journals (Sweden)

    Vicente Antonio Vitório Girardi

    1963-01-01

    Full Text Available Os minerais componentes dos solos da série Taquaral são provenientes do dia básio e de sedimentos glaciais. A contribuição dêsses sedimentos atinge grandes profundidades, apresentando pequena variação percentual nos horizontes A, B e C e diminuindo sensìvelmente no CDr, onde é acentuada a influência do diabásio. Foi estudado o intemperismo do diabásio, sob as condições de boa drenagem e topografia alta, bem como a composição mineralógica do solo.The minerals present in soils of the Taquaral Series are originated from diabase and glacial sedimentary rocks. The glacial contribution in materials to these soils reaches great depths. There is little variation in the percentage of these minerals in horizons A, B, and C, but they decrease in the lower layers, CDr horizon, where diabase is the most important contributor. The mechanism of diabase weathering was studied under conditions of high topography and good drainage mainly through the transformation of feldspars.

  17. Ceratoplastia endotelial com desnudamento da Descemet(DSEK utilizando o dispositivo TAN EndoGlideTM: série de casos

    Directory of Open Access Journals (Sweden)

    Henrique Santiago Baltar Pazos

    2011-06-01

    Full Text Available OBJETIVO: Relatar os resultados da ceratoplastia endotelial com desnudamento da Descemet (DSEK utilizando o dispositivo TAN EndoGlideTM para facilitar a introdução da membrana endotelial. MÉTODOS: Série de casos consecutivos, prospectiva. Foram incluídos 9 pacientes com edema corneano secundário à disfunção endotelial. Melhor acuidade visual corrigida, refração, astigmatismo ceratométrico, espessura corneana central, densidade das células endoteliais e complicações foram analisadas após seguimento de seis meses. RESULTADOS: Houve melhora do edema de córnea e da visão em 7 pacientes (77,78%. A melhor acuidade visual corrigida ficou entre 20/40 e 20/200. A densidade endotelial média após 6 meses variou entre 1.305 céls/mm² e 2.346 céls/mm² com média de perda de 33,14%. Desprendimento de parte do enxerto ocorreu em 1 olho (11,11%, falência primária do transplante endotelial em 2 olhos (22,22%. CONCLUSÃO: O dispositivo TAN EndoGlideTM facilita a introdução do enxerto na ceratoplastia endotelial com desnudamento da Descemet.

  18. DA BARBÁRIE À EMERGÊNCIA DE UMA CULTURA DE PAZ E DE NÃO-VIOLÊNCIA ATRAVÉS DA EDUCAÇÃO

    OpenAIRE

    Samir Araujo Casseb

    2015-01-01

    Este  artigo  trata de  reflexões  sobre  a possibilidade de uma  educação  construtora de uma  cultura  de  paz  em meio  à  barbárie  característica  de  nossa  contemporaneidade. Em  um  primeiro  momento,  discorremos  sobre  o  diagnóstico  da  sociedade contemporânea  a  partir  de  teóricos  da  Escola  de  Frankfurt,  Max  Horkheimer  e Theodor Adorno,  ambos preocupados  com o paradoxo do  avanço da  racionalidade instrumental  e  da  regressão  ética. Em  seguida,  relacionamos  fil...

  19. L'érosion et le ruissellement des sols rouges dans les monts de Zariffet-Algérie : utilisation de simulation de pluies

    Directory of Open Access Journals (Sweden)

    DAHMANI ABDELMADJID

    2015-12-01

    Full Text Available Red - soil erosion and runoff in Zariffet - Algérie Mountains: utilising rain simulation. Soil is slowly renewable resource and once lost, gives a field that will not be as productive for many years. Over time, even small soil losses accumulate to reduced returns. The results obtained by rain simulation tests show that there are relationships between the solid filler (C and runoff (Kr especially when the soil is dry. All the results obtained have shown that the intensity of runoff and erosion is c losely related to the surface states, they even related to land use, slope and rainfall. The interaction of all these parameters is the origin of the genesis of runoff inducing soil loss. In parallel to these factors studied, other factors seem to increase the soil's susceptibility to erosion in the area Zariffet: increasingly extended water deficit, management practices that no longer follow bioclimatic changing environment and especially natural fire frequency. The simulation method, very useful approach, enabled to have significant results on the behavior of the soil and the factors involved on short notice

  20. Action de Paenibacillus polymyxa SGK2 sur quelques champignons de la fusariose du blé dur (Triticum durum en Algérie

    Directory of Open Access Journals (Sweden)

    Lamia Lounaci

    2014-05-01

    Full Text Available Les tests ont porté sur l’action de P. polymyxa SGK2 à l’égard de F. graminearum, F. culmorum, F. verticillioides et M. nivale agents de la fusariose du blé dur en Algérie. La technique de confrontation directe en boîtes de Petri met en évidence une action inhibitrice caractérisée par un ralentissement de la croissance mycélienne. Après 7 jours d’incubation, un arrêt à distance des colonies du pathogène est observé. Nous étions également attachés à rechercher le (ou les moyen utilisé par P. polymyxa SGK2 pour inhiber la croissance des mycètes tests. Cette capacité naturelle agit par la synthèse d'une (ou des substance constitutive inhibitrice de la croissance des quatre champignons sur le milieu King B, d'une (ou des substance inductible inhibitrice de la croissance du F. culmorum et F. graminearum sur le même milieu, et d'une (ou des substance volatile inhibitrice de la croissance des quatre mycètes sur les milieux King B et PDA.

  1. ries temporais e redes neurais: uma análise comparativa de técnicas na previsão de vendas do varejo brasileiro

    Directory of Open Access Journals (Sweden)

    Claudio Felisoni de Angelo

    2011-01-01

    Full Text Available Uma importante atividade econômica em qualquer sociedade diz respeito à comercialização de bens. O varejo consiste exatamente no vínculo que se estabelece entre a indústria e o consumidor final. Prever as vendas é essencial para que se possa gerenciar de modo adequado os processos produtivos e de comercialização. No varejo esse aspecto reveste-se de importância ainda maior. Vender significa harmonizar os interesses dos que produzem com aqueles que compram. Portanto, o presente trabalho tem por propósito examinar comparativamente a aplicação de dois métodos de previsão de vendas de varejo no mercado brasileiro: as séries temporais e as redes neurais. A escolha dessas duas técnicas como objeto dessa comparação foi suscitada pela importância que essas duas concepções têm assumido na literatura. Embora a utilização de redes neurais tenha proporcionado a menor soma dos quadrados dos resíduos, pode-se dizer que os resultados empregando modelos do tipo ARIMA se mostraram praticamente equivalentes.

  2. Biomass as biosorbent for molybdenum ions

    Energy Technology Data Exchange (ETDEWEB)

    Yamaura, Mitiko; Santos, Jacinete L. dos; Damasceno, Marcos O.; Egute, Nayara dos S.; Moraes, Adeniane A.N.; Santos, Bruno Z., E-mail: myamaura@ipen.br, E-mail: jlsantos@ipen.br, E-mail: molidam@ipen.br, E-mail: nayara.egute@usp.br, E-mail: adenianemrs@ig.com.br, E-mail: bzsantos@gmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    Biosorbents have been focused as renewable materials of low cost, and have been used for metal removal from the wastewater by adsorption phenomenon. Biosorbents are prepared of biomass, whose reactive sites in its chemical structure have affinity to bind to metal ions. In this work, performance of corn husk, sugarcane bagasse, coir, banana peel, fish scale, chitin and chitosan as biosorbents of molybdenum (VI) ions in aqueous medium was evaluated. The adsorption experiments were investigated in a batch system varying the pH solution from 0.5 to 12 and the contact time between the phases from 2 min to 70 min. {sup 99}Mo radioisotope was used as radioactive tracer for analysis of molybdenum ions by gamma spectroscopy using a HPGe detector. Results revealed that acidity of the solution favored the adsorption of Mo (VI) ions on the all biosorbents. Adsorption values higher than 85% were found on sugarcane bagasse, coir, corn husk, chitin and chitosan at pH 2.0. Only the chitosan was dissolved at pH 0.5 and a gel was formed. The models of pseudo-second order and external film diffusion described the kinetics of adsorption of Mo ions on the coir. This work showed that the studied biomass has high potential to be used as biosorbent of molybdenum ions from acidic wastewater, and the kinetics of Mo adsorption on the coir suggested high-affinity adsorption governed by chemisorption. (author)

  3. Biomass as biosorbent for molybdenum ions

    International Nuclear Information System (INIS)

    Yamaura, Mitiko; Santos, Jacinete L. dos; Damasceno, Marcos O.; Egute, Nayara dos S.; Moraes, Adeniane A.N.; Santos, Bruno Z.

    2013-01-01

    Biosorbents have been focused as renewable materials of low cost, and have been used for metal removal from the wastewater by adsorption phenomenon. Biosorbents are prepared of biomass, whose reactive sites in its chemical structure have affinity to bind to metal ions. In this work, performance of corn husk, sugarcane bagasse, coir, banana peel, fish scale, chitin and chitosan as biosorbents of molybdenum (VI) ions in aqueous medium was evaluated. The adsorption experiments were investigated in a batch system varying the pH solution from 0.5 to 12 and the contact time between the phases from 2 min to 70 min. 99 Mo radioisotope was used as radioactive tracer for analysis of molybdenum ions by gamma spectroscopy using a HPGe detector. Results revealed that acidity of the solution favored the adsorption of Mo (VI) ions on the all biosorbents. Adsorption values higher than 85% were found on sugarcane bagasse, coir, corn husk, chitin and chitosan at pH 2.0. Only the chitosan was dissolved at pH 0.5 and a gel was formed. The models of pseudo-second order and external film diffusion described the kinetics of adsorption of Mo ions on the coir. This work showed that the studied biomass has high potential to be used as biosorbent of molybdenum ions from acidic wastewater, and the kinetics of Mo adsorption on the coir suggested high-affinity adsorption governed by chemisorption. (author)

  4. Surface negative ion production in ion sources

    International Nuclear Information System (INIS)

    Belchenko, Y.

    1993-01-01

    Negative ion sources and the mechanisms for negative ion production are reviewed. Several classes of sources with surface origin of negative ions are examined in detail: surface-plasma sources where ion production occurs on the electrode in contact with the plasma, and ''pure surface'' sources where ion production occurs due to conversion or desorption processes. Negative ion production by backscattering, impact desorption, and electron- and photo-stimulated desorption are discussed. The experimental efficiencies of intense surface negative ion production realized on electrodes contacted with hydrogen-cesium or pure hydrogen gas-discharge plasma are compared. Recent modifications of surface-plasma sources developed for accelerator and fusion applications are reviewed in detail

  5. Biotyping and genotypic diversity among oral Candida albicans strains from caries-free and caries-active healthy children Diversidade fenotípica e genotípica entre amostras de Candida albicans isoladas de crianças saudáveis cárie ativas e livre de cárie

    Directory of Open Access Journals (Sweden)

    Rita de Cássia Mardegan

    2006-03-01

    Full Text Available Candida albicans oral strains collected from caries-free and caries-active healthy children ranging from 24 to 36 months old, were studied. The aim of the study was to determine proteinase and phospholipase activities produced by Candida albicans in the two groups and to determine the phenotypic diversity of these enzymes based on genetic polymorphism using the AP-PCR method. Strains identified by morphological and fermentation tests as C. albicans were grown in proteinase and phospholipase agar media at 37ºC for 7 and 4 days, respectively. After the incubation period, the enzyme activity of the proteinase and phospholipase positive strains was measured. All strains were subjected to AP-PCR, using the arbitrary primer AP-3. The enzymatic analysis showed no differences between the two groups. The AP-PCR method was effective in demonstrating intra-individual genetic polymorphism in C. albicans, showing a greater clonal diversity in caries-active versus caries-free children. Dendograms of similarity showed only intra-individual clonal lineage. The results suggest that the enzymatic profile does not depend on the genotypic characteristics of the strains.Cepas orais de Candida albicans coletadas de crianças saudáveis cárie ativas e livres de cárie com idade variando de 24 a 36 meses, foram estudadas. O propósito do estudo foi determinar a atividade da proteinase e da fosfolipase produzida por Candida albicans nos dois grupos e comparar com a diversidade genotípica usando o método AP-PCR. As cepas identificadas como C. albicans por testes morfológicos e de fermentação, foram cultivadas em meio ágar proteinase e fosfolipase a 37ºC por 7 e 4 dias, respectivamente. Após o período de incubação, a atividade enzimática das cepas proteinase e fosfolipase positiva foram medidas. Todas as cepas foram submetidas a técnica genotípica AP-PCR, usando o primer arbitrário AP-3. A análise enzimática demonstrou que não há diferença entre os

  6. Cryogenic ion chemistry and spectroscopy.

    Science.gov (United States)

    Wolk, Arron B; Leavitt, Christopher M; Garand, Etienne; Johnson, Mark A

    2014-01-21

    The use of mass spectrometry in macromolecular analysis is an incredibly important technique and has allowed efficient identification of secondary and tertiary protein structures. Over 20 years ago, Chemistry Nobelist John Fenn and co-workers revolutionized mass spectrometry by developing ways to non-destructively extract large molecules directly from solution into the gas phase. This advance, in turn, enabled rapid sequencing of biopolymers through tandem mass spectrometry at the heart of the burgeoning field of proteomics. In this Account, we discuss how cryogenic cooling, mass selection, and reactive processing together provide a powerful way to characterize ion structures as well as rationally synthesize labile reaction intermediates. This is accomplished by first cooling the ions close to 10 K and condensing onto them weakly bound, chemically inert small molecules or rare gas atoms. This assembly can then be used as a medium in which to quench reactive encounters by rapid evaporation of the adducts, as well as provide a universal means for acquiring highly resolved vibrational action spectra of the embedded species by photoinduced mass loss. Moreover, the spectroscopic measurements can be obtained with readily available, broadly tunable pulsed infrared lasers because absorption of a single photon is sufficient to induce evaporation. We discuss the implementation of these methods with a new type of hybrid photofragmentation mass spectrometer involving two stages of mass selection with two laser excitation regions interfaced to the cryogenic ion source. We illustrate several capabilities of the cryogenic ion spectrometer by presenting recent applications to peptides, a biomimetic catalyst, a large antibiotic molecule (vancomycin), and reaction intermediates pertinent to the chemistry of the ionosphere. First, we demonstrate how site-specific isotopic substitution can be used to identify bands due to local functional groups in a protonated tripeptide designed to

  7. Towards rare-earth-ion-doped Al2O3 active integrated optical devices

    OpenAIRE

    Ay, F.; Bradley, J.; Worhoff, Kerstin; Pollnau, Markus

    2007-01-01

    Aluminum oxide planar waveguides with low loss (0.11 dB/cm at 1523 nm) are fabricated. Channel waveguides are obtained by reactive ion etching. Erbium-doped layers show no upconversion luminescence, a hint that ion clustering is small.

  8. Síndrome de Burnout e rendimento acadêmico em estudantes da primeira à quarta série de um curso de graduação em medicina

    Directory of Open Access Journals (Sweden)

    Mariana Ono Mori

    Full Text Available Este estudo objetivou investigar a associação entre a Síndrome de Burnout e o desempenho acadêmico de estudantes da primeira à quarta série de um curso de graduação em Medicina. O comprometimento emocional dos alunos variou conforme a série, com diferenças significativas para os componentes da síndrome entre alunos com notas acima e abaixo da média, sendo o primeiro ano o mais afetado. Isto indica que, no curso estudado, a implantação da reforma curricular não foi um fator de proteção para a Síndrome de Burnout. Constatou-se também associação entre a síndrome e o rendimento acadêmico dos estudantes em disciplinas da primeira e da segunda série. São necessários estudos longitudinais sobre o assunto para confirmar as tendências encontradas e esclarecer a interferência de fatores que não puderam ser abordados neste estudo, considerado preliminar.

  9. On the Construction of Sorted Reactive Systems

    DEFF Research Database (Denmark)

    Birkedal, Lars; Debois, Søren; Hildebrandt, Thomas

    2008-01-01

    We develop a theory of sorted bigraphical reactive systems. Every application of bigraphs in the literature has required an extension, a sorting, of pure bigraphs. In turn, every such application has required a redevelopment of the theory of pure bigraphical reactive systems for the sorting at hand...... bigraphs. Technically, we give our construction for ordinary reactive systems, then lift it to bigraphical reactive systems. As such, we give also a construction of sortings for ordinary reactive systems. This construction is an improvement over previous attempts in that it produces smaller and much more...

  10. Ions in carbon dioxide at an atmospheric pressure

    International Nuclear Information System (INIS)

    Ikezoe, Yasumasa; Onuki, Kaoru; Shimizu, Saburo; Nakajima, Hayato; Sato, Shoichi; Matsuoka, Shingo; Nakamura, Hirone; Tamura, Takaaki

    1985-01-01

    The formation and the subsequent reactions of positive and negative ions were observed by a time resolved atmospheric pressure ionization mass spectrometer (TRAPI) in an atmospheric pressure carbon dioxide added with small amounts of carbon monoxide and oxygen. A relatively stable ion of (44 x n) + (n >= 2) having a different reactivity from that of (CO 2 ) + sub(n) was found to be one of major ionic species in this gas system. This species was tentatively assigned as [O 2 (CO) 2 ] + (CO 2 )sub(n-2). A new reaction sequence of positive ions is proposed which can be operative in the radiolysis of carbon dioxide at 1 atm. (author)

  11. Gas phase ion chemistry

    CERN Document Server

    Bowers, Michael T

    1979-01-01

    Gas Phase Ion Chemistry, Volume 1 covers papers on the advances of gas phase ion chemistry. The book discusses the advances in flow tubes and the measurement of ion-molecule rate coefficients and product distributions; the ion chemistry of the earth's atmosphere; and the classical ion-molecule collision theory. The text also describes statistical methods in reaction dynamics; the state selection by photoion-photoelectron coincidence; and the effects of temperature and pressure in the kinetics of ion-molecule reactions. The energy distribution in the unimolecular decomposition of ions, as well

  12. Apparatus and method for extracting power from energetic ions produced in nuclear fusion

    Science.gov (United States)

    Fisch, Nathaniel J.; Rax, Jean M.

    1994-01-01

    An apparatus and method of extracting power from energetic ions produced by nuclear fusion in a toroidal plasma to enhance respectively the toroidal plasma current and fusion reactivity. By injecting waves of predetermined frequency and phase traveling substantially in a selected poloidal direction within the plasma, the energetic ions become diffused in energy and space such that the energetic ions lose energy and amplify the waves. The amplified waves are further adapted to travel substantially in a selected toroidal direction to increase preferentially the energy of electrons traveling in one toroidal direction which, in turn, enhances or generates a toroidal plasma current. In an further adaptation, the amplified waves can be made to preferentially increase the energy of fuel ions within the plasma to enhance the fusion reactivity of the fuel ions. The described direct, or in situ, conversion of the energetic ion energy provides an efficient and economical means of delivering power to a fusion reactor.

  13. Reactivity to sorbitan sesquioleate affects reactivity to fragrance mix I.

    Science.gov (United States)

    Geier, Johannes; Schnuch, Axel; Lessmann, Holger; Uter, Wolfgang

    2015-11-01

    Fragrance mix I (FM I) and its single constituents contain 5% and 1% sorbitan sesquioleate (SSO), respectively. SSO is a rare sensitizer and a potential irritant. To determine whether the outcome of the FM I breakdown test is affected by positive patch test reactivity to SSO. A retrospective analysis of data from the Information Network of Departments of Dermatology, 1998-2013, was performed. The full FM I breakdown test including SSO was tested in 2952 patients. Of these, 154 (5.2%) had a positive patch test reaction to SSO 20% pet. and 2709 (91.8%) had a negative patch test reaction. Positive reactions to one or more of the single fragrances contained in the mix were significantly more common (82.5% versus 57.3%) in SSO-positive patients, who also had more multiple reactions than FM I-positive patients with negative SSO reactions (61.5% versus 21.3% patients with reactions to two or more fragrances). Our results indicate that reactivity to SSO markedly affects the outcome of patch testing with FM I and its single constituents. SSO must be an obligatory part of the full FM I breakdown test, and should ideally be included in the baseline series. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  14. Menstrual cycle and skin reactivity

    DEFF Research Database (Denmark)

    Agner, T; Damm, P; Skouby, S O

    1991-01-01

    The hypothesis was tested that a cyclic variation exists in skin reactivity to irritant stimuli. Twenty-nine healthy women with regular menstrual cycles were challenged with sodium lauryl sulfate as an irritant patch test at day 1 and at days 9 through 11 of the menstrual cycle. The skin response...... to the applied irritant stimulus was evaluated by visual scoring and also quantified by measurements of transepidermal water loss, edema formation, and blood flow in the skin. The skin response to challenge with sodium lauryl sulfate was found to be significantly stronger at day 1 than at days 9 through 11...

  15. Laser ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Bykovskij, Yu

    1979-02-01

    The characteristics a laser source of multiply-ionized ions are described with regard to the interaction of laser radiation and matter, ion energy spectrum, angular ion distribution. The amount of multiple-ionization ions is evaluated. Out of laser source applications a laser injector of multiple-ionization ions and nuclei, laser mass spectrometry, laser X-ray microradiography, and a laser neutron generators are described.

  16. Fast screening of analytes for chemical reactions by reactive low-temperature plasma ionization mass spectrometry.

    Science.gov (United States)

    Zhang, Wei; Huang, Guangming

    2015-11-15

    Approaches for analyte screening have been used to aid in the fine-tuning of chemical reactions. Herein, we present a simple and straightforward analyte screening method for chemical reactions via reactive low-temperature plasma ionization mass spectrometry (reactive LTP-MS). Solution-phase reagents deposited on sample substrates were desorbed into the vapor phase by action of the LTP and by thermal desorption. Treated with LTP, both reagents reacted through a vapor phase ion/molecule reaction to generate the product. Finally, protonated reagents and products were identified by LTP-MS. Reaction products from imine formation reaction, Eschweiler-Clarke methylation and the Eberlin reaction were detected via reactive LTP-MS. Products from the imine formation reaction with reagents substituted with different functional groups (26 out of 28 trials) were successfully screened in a time of 30 s each. Besides, two short-lived reactive intermediates of Eschweiler-Clarke methylation were also detected. LTP in this study serves both as an ambient ionization source for analyte identification (including reagents, intermediates and products) and as a means to produce reagent ions to assist gas-phase ion/molecule reactions. The present reactive LTP-MS method enables fast screening for several analytes from several chemical reactions, which possesses good reagent compatibility and the potential to perform high-throughput analyte screening. In addition, with the detection of various reactive intermediates (intermediates I and II of Eschweiler-Clarke methylation), the present method would also contribute to revealing and elucidating reaction mechanisms. Copyright © 2015 John Wiley & Sons, Ltd.

  17. Ion Beam Propulsion Study

    Science.gov (United States)

    2008-01-01

    The Ion Beam Propulsion Study was a joint high-level study between the Applied Physics Laboratory operated by NASA and ASRC Aerospace at Kennedy Space Center, Florida, and Berkeley Scientific, Berkeley, California. The results were promising and suggested that work should continue if future funding becomes available. The application of ion thrusters for spacecraft propulsion is limited to quite modest ion sources with similarly modest ion beam parameters because of the mass penalty associated with the ion source and its power supply system. Also, the ion source technology has not been able to provide very high-power ion beams. Small ion beam propulsion systems were used with considerable success. Ion propulsion systems brought into practice use an onboard ion source to form an energetic ion beam, typically Xe+ ions, as the propellant. Such systems were used for steering and correction of telecommunication satellites and as the main thruster for the Deep Space 1 demonstration mission. In recent years, "giant" ion sources were developed for the controlled-fusion research effort worldwide, with beam parameters many orders of magnitude greater than the tiny ones of conventional space thruster application. The advent of such huge ion beam sources and the need for advanced propulsion systems for exploration of the solar system suggest a fresh look at ion beam propulsion, now with the giant fusion sources in mind.

  18. Reactive Membrane Barriers for Containment of Subsurface Contamination

    Energy Technology Data Exchange (ETDEWEB)

    William A. Arnold; Edward L. Cussler

    2007-02-26

    The overall goal of this project was to develop reactive membrane barriers--a new and flexible technique to contain and stabilize subsurface contaminants. Polymer membranes will leak once a contaminant is able to diffuse through the membrane. By incorporating a reactive material in the polymer, however, the contaminant is degraded or immobilized within the membrane. These processes increase the time for contaminants to breakthrough the barrier (i.e. the lag time) and can dramatically extend barrier lifetimes. In this work, reactive barrier membranes containing zero-valent iron (Fe{sup 0}) or crystalline silicotitanate (CST) were developed to prevent the migration of chlorinated solvents and cesium-137, respectively. These studies were complemented by the development of models quantifying the leakage/kill time of reactive membranes and describing the behavior of products produced via the reactions within the membranes. First, poly(vinyl alcohol) (PVA) membranes containing Fe{sup 0} and CST were prepared and tested. Although PVA is not useful in practical applications, it allows experiments to be performed rapidly and the results to be compared to theory. For copper ions (Cu{sup 2+}) and carbon tetrachloride, the barrier was effective, increasing the time to breakthrough over 300 times. Even better performance was expected, and the percentage of the iron used in the reaction with the contaminants was determined. For cesium, the CST laden membranes increased lag times more than 30 times, and performed better than theoretical predictions. A modified theory was developed for ion exchangers in reactive membranes to explain this result. With the PVA membranes, the effect of a groundwater matrix on barrier performance was tested. Using Hanford groundwater, the performance of Fe{sup 0} barriers decreased compared to solutions containing a pH buffer and high levels of chloride (both of which promote iron reactivity). For the CST bearing membrane, performance improved by a

  19. Reactive Membrane Barriers for Containment of Subsurface Contamination

    International Nuclear Information System (INIS)

    William A. Arnold; Edward L. Cussler

    2007-01-01

    The overall goal of this project was to develop reactive membrane barriers--a new and flexible technique to contain and stabilize subsurface contaminants. Polymer membranes will leak once a contaminant is able to diffuse through the membrane. By incorporating a reactive material in the polymer, however, the contaminant is degraded or immobilized within the membrane. These processes increase the time for contaminants to breakthrough the barrier (i.e. the lag time) and can dramatically extend barrier lifetimes. In this work, reactive barrier membranes containing zero-valent iron (Fe 0 ) or crystalline silicotitanate (CST) were developed to prevent the migration of chlorinated solvents and cesium-137, respectively. These studies were complemented by the development of models quantifying the leakage/kill time of reactive membranes and describing the behavior of products produced via the reactions within the membranes. First, poly(vinyl alcohol) (PVA) membranes containing Fe 0 and CST were prepared and tested. Although PVA is not useful in practical applications, it allows experiments to be performed rapidly and the results to be compared to theory. For copper ions (Cu 2+ ) and carbon tetrachloride, the barrier was effective, increasing the time to breakthrough over 300 times. Even better performance was expected, and the percentage of the iron used in the reaction with the contaminants was determined. For cesium, the CST laden membranes increased lag times more than 30 times, and performed better than theoretical predictions. A modified theory was developed for ion exchangers in reactive membranes to explain this result. With the PVA membranes, the effect of a groundwater matrix on barrier performance was tested. Using Hanford groundwater, the performance of Fe 0 barriers decreased compared to solutions containing a pH buffer and high levels of chloride (both of which promote iron reactivity). For the CST bearing membrane, performance improved by a factor of three when

  20. Sensitivity of ICF ignition conditions to non-Maxwellian DT fusion reactivity

    International Nuclear Information System (INIS)

    Garbett, W. J.

    2013-01-01

    The hotspot ignition conditions in ICF are determined by considering the power balance between fusion energy deposition and energy loss terms. Uncertainty in any of these terms has potential to modify the ignition conditions, changing the optimum ignition capsule design. This paper considers the impact of changes to the DT fusion reaction rate due to non-thermal ion energy distributions. The DT fusion reactivity has been evaluated for a class of non-Maxwellian distributions representing a perturbation to the tail of a thermal distribution. The resulting reactivity has been used to determine hotspot ignition conditions as a function of the characteristic parameter of the modified distribution. (authors)