WorldWideScience

Sample records for responsive high-tech facilities

  1. ANTHROPOLOGICAL ASPECTS OF HIGH-TECH FACILITIES OP-ERATION SUPPORT

    Olexandr O. Matusevych

    2017-06-01

    Full Text Available Purpose. The article, based on the analysis of actual materials, highlights the importance of taking into account the influence of the human factor in occurrence of emergency situations in terms of transport infrastructure. Methodology. The research is based on the interdisciplinary system analysis. It was comprehended how the service technicians of high-tech systems can create latent unsafe conditions that combined with other hazardous activities can cause an emergency and injury. The authors attempt to dramatize the issue in order to find a solution – on the one hand, man is the most crucial part of a complex technological system, on the other hand – he is the most unreliable part of the system, especially in terms of the extreme power of modern vehicles and their speeds. The above situation demonstrates the need for a new level of anthropic comprehension of the high-tech systems in the schematic set "human-system-environment". Originality. The paper analysed the problems and conditions of human factors that allow detecting the causes of technicians’ errors. The authors highlighted proposals for psychocorrective work among the personnel of the facilities. The problem of further development of continuous improvement of the equipment maintenance systems, based on integrated approach taking into account the human factor, is also not overlooked. Conclusion. In the course of understanding the human factor and its influence on the processes, the most urgent tasks are as follows: implementation of new system software, automation of vehicles and development of high production culture based on moral qualities of experts.

  2. High-tech entrepreneurship

    Bernasconi, Michel; Harris, Simon; Mønsted, Mette

    ; entrepreneurial finance; marketing technological innovations; and high-tech incubation management. Including case studies to give practical insights into genuine business examples, this comprehensive book has a distinctly 'real-world' focus throughout.Edited by a multi-national team, this comprehensive book......High-tech businesses form a crucial part of entrepreneurial activity - in some ways representing very typical examples of entrepreneurship, yet in some ways representing quite different challenges. The uncertainty in innovation and advanced technology makes it difficult to use conventional economic...... planning models, and also means that the management skills used in this area must be more responsive to issues of risk, uncertainty and evaluation than in conventional business opportunities. Whilst entrepreneurial courses do reflect the importance of high-tech businesses, they often lack the resources...

  3. High-tech entrepreneurship

    Bernasconi, Michel; Harris, Simon; Mønsted, Mette

    High-tech businesses form a crucial part of entrepreneurial activity - in some ways representing very typical examples of entrepreneurship, yet in some ways representing quite different challenges. The uncertainty in innovation and advanced technology makes it difficult to use conventional economic...... focuses on the blend of theory and practice needed to inform advanced entrepreneurship students of the specifics of high-tech start-ups. Key topics covered include: uncertainty and innovation; entrepreneurial finance; marketing technological innovations; and high-tech incubation management.......Edited by a multi-national team, it draws together leading writers and researchers from across Europe, and is therefore a must-read for all those involved in advanced entrepreneurship with specific interests in high-tech start-ups....

  4. High Tech M&As

    Toppenberg, Gustav

    2013-01-01

    Technology driven industries have seen fast moving technology changes, higher complexity and reduced product life cycles. These emerging trends present challenges for companies in industries where technology is at the forefront. The extant research deals with ‘low-tech’ industries and majority...... of findings are not applicable to the high-tech industry; in fact this industry has many additional challenges. In this study, we aim to explore the process of M&A in the high-tech industry by drawing on extant literature and empirical field work. The paper outlines a research project in progress which...... intends to provide theoretical, empirical and practical contributions in answering the research question: what role does Operations and IT play in creating value in high-tech M&As? The research adds a needed perspective on M&A literature by unveiling unique challenges and opportunities faced by the M...

  5. High-Tech Security Help.

    Flanigan, Robin L.

    2000-01-01

    Advocates embrace high-tech security measures as necessary to avoid Columbine-style massacres. Critics contend that school systems can go overboard, making students feel less safe and too closely scrutinized. Current electronic, biometric, and computer-mapping devices and school applications are discussed. Vendors are listed. (MLH)

  6. Investment in high-tech industries : An example from the LCD industry

    Huisman, K.J.M.; Kort, P.M.; Plasmans, J.E.J.; Bensoussan, A.; Peng, S.; Sung, J.

    2013-01-01

    This chapter considers a representative firm taking investment decisions in a high-tech environment where different generations of production facilities are invented over time. First, we develop a general real options investment model for high-tech industries in which, according to standard

  7. THE FUNDAMENTALS OF HIGH-TECH SECTOR AND HIGH-TECH COMPANIES OPERATION

    Svetlana V. Gavrilova

    2014-01-01

    Full Text Available The article develops the concept of the«high-tech sector» and the «high-techcompany» as well as their differences and relation. Further the author accounts for the particularities of the high-tech company functioning compared to the common one. Finally the key factors and coreelements of high technology are identified.

  8. URBox : High tech energy and informal housing

    Cuperus, Y.J.; Smets, D.

    2011-01-01

    This paper reports on the URBox concept encompassing the high tech end of solar energy and informal low cost and affordable housing. It aims to contribute to solving the global energy crisis by building solar energy settlements in deserts where land is affordable and sunshine in abundance. First the

  9. High tech in the Öresund region

    Hansen, Povl Adler; Serin, Göran Folke

    This book discusses the development conditions in the high tech sector for both high tech manufacturing and services. A central issue in the book is the differences in externalities which exist between various industries in the high tech sector. In this connection the confusion of externalities...... related to different parts of the high tech sector will be addressed. The location of the high tech sector in the Öresund region will be analysed and the region will also be related to other high tech regions in Europe....

  10. High-Tech Means High-Efficiency: The Business Case for EnergyManagement in High-Tech Industries

    Shanshoian, Gary; Blazek, Michele; Naughton, Phil; Seese, RobertS.; Mills, Evan; Tschudi, William

    2005-11-15

    In the race to apply new technologies in ''high-tech'' facilities such as data centers, laboratories, and clean rooms, much emphasis has been placed on improving service, building capacity, and increasing speed. These facilities are socially and economically important, as part of the critical infrastructure for pharmaceuticals,electronics, communications, and many other sectors. With a singular focus on throughput, some important design issues can be overlooked, such as the energy efficiency of individual equipment (e.g., lasers, routers and switches) as well as the integration of high-tech equipment into the power distribution system and the building envelope. Among technology-based businesses, improving energy efficiency presents an often untapped opportunity to increase profits, enhance process control,maximize asset value, improve the work place environment, and manage a variety of business risks. Oddly enough, the adoption of energy efficiency improvements in this sector lags behind many others. As a result, millions of dollars are left on the table with each year ofoperation.

  11. Agglomeration Economies and the High-Tech Computer

    Wallace, Nancy E.; Walls, Donald

    2004-01-01

    This paper considers the effects of agglomeration on the production decisions of firms in the high-tech computer cluster. We build upon an alternative definition of the high-tech computer cluster developed by Bardhan et al. (2003) and we exploit a new data source, the National Establishment Time-Series (NETS) Database, to analyze the spatial distribution of firms in this industry. An essential contribution of this research is the recognition that high-tech firms are heterogeneous collections ...

  12. Cleanroom energy benchmarking in high-tech and biotech industries

    Tschudi, William; Benschine, Kathleen; Fok, Stephen; Rumsey, Peter

    2001-01-01

    Cleanrooms, critical to a wide range of industries, universities, and government facilities, are extremely energy intensive. Consequently, energy represents a significant operating cost for these facilities. Improving energy efficiency in cleanrooms will yield dramatic productivity improvement. But more importantly to the industries which rely on cleanrooms, base load reduction will also improve reliability. The number of cleanrooms in the US is growing and the cleanroom environmental systems' energy use is increasing due to increases in total square footage and trends toward more energy intensive, higher cleanliness applications. In California, many industries important to the State's economy utilize cleanrooms. In California these industries utilize over 150 cleanrooms with a total of 4.2 million sq. ft. (McIlvaine). Energy intensive high tech buildings offer an attractive incentive for large base load energy reduction. Opportunities for energy efficiency improvement exist in virtually all operating cleanrooms as well as in new designs. To understand the opportunities and their potential impact, Pacific Gas and Electric Company sponsored a project to benchmark energy use in cleanrooms in the electronics (high-tech) and biotechnology industries. Both of these industries are heavily dependent intensive cleanroom environments for research and manufacturing. In California these two industries account for approximately 3.6 million sq. ft. of cleanroom (McIlvaine, 1996) and 4349 GWh/yr. (Sartor et al. 1999). Little comparative energy information on cleanroom environmental systems was previously available. Benchmarking energy use allows direct comparisons leading to identification of best practices, efficiency innovations, and highlighting previously masked design or operational problems

  13. Engineering English and the High-Tech Industry: A Case Study of an English Needs Analysis of Process Integration Engineers at a Semiconductor Manufacturing Company in Taiwan

    Spence, Paul; Liu, Gi-Zen

    2013-01-01

    The global high-tech industry is characterized by extreme competitiveness, innovation, and widespread use of English. Consequently, Taiwanese high-tech companies require engineers that are talented in both their engineering and English abilities. In response to the lack of knowledge regarding the English skills needed by engineers in Taiwan's…

  14. Does Service Innovation Matter in High-Tech Industry?

    Wang, Chao-Hung

    2014-01-01

    Service innovation has been found to be a major driver of innovation performance in service contexts. But this issue raises questions concerning the extent to which the relationship between market orientation and innovation performance holds in the high-tech industry. Relatively little research has examined how market orientation contributes to innovation performance through service innovation. We here report an empirical study of 235 Taiwanese high-tech firms to examine the influence of mark...

  15. Pricing Policy and Strategies for Consumer High-Tech Products

    Dovleac, L.

    2014-06-01

    Full Text Available This paper highlights the complex process of price setting for consumer high-tech products. These prices are highly influenced by some external factors from the economic and social environment. The main objective of this paper is to establish the most effective pricing policies and strategies used by high-tech companies of various sizes. Decisions about price fixing for consumer high-technology products are largely influenced by consumer behaviour, too.

  16. Fuzzy model investic do High-tech projektů

    Alžběta Kubíčková

    2013-10-01

    Full Text Available Purpose of the article: Relations among parameters of High-tech projects are very complex, vague, partially inconsistent and multidimensional. Optimal decisions to invest into High-tech companies require top field experts and knowledgeable investors. Therefore the conventional methods of investments analysis are not relevant. Therefore fuzzy logic is introduced. Methodology/methods: A fuzzy knowledge base is a flexible framework for acquisition of vague inconsistent knowledge items which are typical for knowledge economics and consequently for High-tech projects. The pooling of the records and / or observations represents a trade-off between minimal modification of the original data and elimination of inconsistencies among available sets of data. Scientific aim: The paper presents a detailed description of fuzzy model of investment decision making into High-tech firm’s projects. A set of conditional statements was used to formalize the effects of selected variables on investment feasibility of High-tech projects. The main aim is to quantify feasibilities of High-tech projects risk investors make good /not bad decisions. Findings: A set of 50 observations of High-tech companies was transformed into a set of 50 conditional statements using 14 variables. The result is the fuzzy model, which can be used to answer investors’ queries. Two queries are answered and presented in details as an example and as a nucleus of a fuzzy dialogue investor – computer. Conclusions: The main problem is the sparseness of the fuzzy model. Many fuzzy similarities are relatively low and the decision process is therefore often problematic. A much more complex set of variables must be applied to specify the fuzzy model to increase reliability of predictions and decisions.

  17. Does Service Innovation Matter in High-Tech Industry

    Chao-Hung Wang

    2014-05-01

    Full Text Available Service innovation has been found to be a major driver of innovation performance in service contexts. But this issue raises questions concerning the extent to which the relationship between market orientation and innovation performance holds in the high-tech industry. Relatively little research has examined how market orientation contributes to innovation performance through service innovation. We here report an empirical study of 235 Taiwanese high-tech firms to examine the influence of market orientation on service innovation and innovation performance. A noteworthy finding is that the impacts of customer orientation and competitor orientation on innovation performance are fully mediated by service innovation. However, service innovation does only partially mediate the relationship between inter-functional orientation and innovation performance. The findings of this study should help managers consider appropriate service innovation in high-tech industry.

  18. MUSEUM GEOLOGI DAN PRASEJARAH DI MAKASSAR DENGAN PENDEKATAN ARSITEKTUR HIGH TECH

    Saefullah Saefullah

    2015-12-01

    Full Text Available Abstrak—Indonesia kaya akan sumber daya geologi yang terdiri dari batuan, mineral dan bahan tambang. Berbicara mengenai geologi sangat erat kaitannya dengan zaman prasejarah.karena belum ditemukannya bukti-bukti tertulis dari zaman prasejarah tersebut, keterangan mengenai zaman ini diperoleh melalui bidang-bidang seperti paleontologi, astronomi, biologi, geologi, antropologi, dan arkeologi pentingnya melestarikan dan menjaga peninggalan-peninggalan prasejarah. Sehingga akan menumbuhkan rasa tanggungjawab terhadapnya. Hal ini sejalan dengan tugas Direktorat Jendral Kebudayaan Kementrian Pendidikan dan Kebudyaaan Indonesia dalam laporan kinerjanya .yang mengemukakan bahwa sisa-sisa peninggalan sejarah penting dipelihara sebagai pelajaran hidup bagi generasi berikutnya.Tujuan penelitian menyusun suatu landasan konseptual desain perancangan Museum Geologi dan prasejarah dengan pendekatan arsitektur high-tech, menerapkan system Double fasade, Ligth Pipe dan system fotovoltaic pada bangunan, mengaplikasikan intelegent system pada utilitas pada bangunan.Hasil Laporan ini adalah mendesain bangunan museum geologi dan prasejarah di Makassar dengan pendekatan arsitektur high-tech. Kata Kunci :Museum geologi, prasejarah, high-tech Abstract-Indonesia is rich geological resources consisting of rocks, minerals and minerals. Talking about the geology is very closely related to prehistoric times because of not finding written evidence from prehistoric times, the information concerning this age obtained through fields like paleontology, astronomy, biology, geology, anthropology, and archeology importance of preserving and maintaining prehistoric relics. So will foster a sense of responsibility to it. This is in line with the duties of the Directorate General of Culture Ministry of Education and Indonesian culture in its performance report which suggested that the remains of important historical remains preserved as a living lesson for the next generation. The

  19. Ten Niche Strategies To Commercialize New High-Tech Products

    Ortt, J.R.; Langley, D.J.; Pals, N.

    2013-01-01

    There are serious gaps in the scientific literature relating to niche strategies as a means for commercializing new high-tech products. In particular, there is no clarity about what types of niche strategies can be distinguished, or how a niche strategy can be selected to suit a certain ituation. In

  20. Perceptions of Diversity Training Needs in High Tech Business.

    Lieberman, Devorah A.; Gurtov, Ellene

    A study questioned 12 human resource personnel, corporation managers, and diversity trainers about their perceptions of diversity training needs in Pacific Northwest high tech organizations. The overarching research questions for the study were as follows: (1) What are the most frequently reported diversity training needs among human resource…

  1. High Touch in a High-Tech World

    Gibson, Cindy L.

    2009-01-01

    In a world of high tech and low touch, it is easy for public relations programs to stray from tried-and-true interpersonal strategies long associated with solid communication planning. New technologies allow communications professionals to quickly send e-mails and telephone calls to selected groups. Social media sites provide users immediate…

  2. High-tech and climate change : promoting the application of enabling and high-tech solutions to reduce GHG emissions : final report

    2003-03-01

    This report identifies the greenhouse gas (GHG) reducing potential of the high-tech sector with particular reference to the following 5 key technology convergence groups: biotechnology and bio-products; intelligent systems; information and communications technology; advanced materials; and, nanotechnology. It was noted that Canada's efforts to reduce GHG emissions in the abatement of climate change can drive innovation, stimulate economic growth and attain international leadership in technology solutions. Although Canada's strong economic growth has resulted in the creation of more highly skilled jobs, expansion in innovation and new infrastructure, there is a challenge of preserving the environmental and social quality within communities, and ensuring that productivity within companies does not lapse. In response, the government is shaping policy responses that drive innovation, productivity and prosperity and which help Canadian companies capitalize on emerging global opportunities while minimizing environmental and social impacts. This report includes information on climate change and the Kyoto Protocol, Canada's Climate Change Action Plan and the emerging carbon marketplace. It also describes the role of technology innovation and the opportunity of convergence in spurring innovation. Several actions have been proposed to Industry Canada by different technology sectors to help climate change providers generate innovative solutions, commercialize products and expand market presence. This report includes those initiatives which further promote the convergence, growth and development of different enabling and high-tech sectors to develop climate change solutions; promote the opportunities that are emerging to apply innovative high-tech and enabling technologies to reduce GHG emissions; and help Canada meet its Kyoto commitments. 50 refs., 1 tab., 2 figs

  3. Skill Acquisition in "High Tech" Export Agriculture: A Case Study of Lifelong Learning in Peru's Asparagus Industry

    Carnoy, Martin; Luschei, Thomas F.

    2008-01-01

    As one of the world's largest exporters of asparagus, Peru has developed a high-tech system of asparagus production, processing and delivery that requires well-trained and responsive workers. In this study we examine the role of both private and public sectors in preparing workers for the asparagus industry and the implications of this skill…

  4. Entrepreneurship in high-tech and knowledge-intensive sectors

    Christensen, Patrizia V.; Madsen, Henning; Neergaard, Helle

    development of new enterprises in high-tech and knowledge-intensive sectors are analysed in relation to the educational and professional background of the entrepreneur/entrepreneurial team, as well as the personal and professional social networks of the entrepreneurs. The analysis is based on a theoretical...... framework combining theories of human and social capital. Secondary aspects addressed in the research project are questions of male vs. female entrepreneurship, internationalisation-globalisation, and business success/failure.......The paper investigates key factors influencing the establishment and early growth of high-tech and knowledge-intensive new firms in Denmark. Particular attention is paid to the human and social variables affecting the creation, survival, and growth of such firms. The establishment and subsequent...

  5. Finnish High Tech in China - A Study of Business Culture

    Suhonen, Petri

    2013-01-01

    The objective of this thesis was to study the challenges caused by differences in Finnish and Chinese business cultures in the high technology industry. The study explains the main characteristics of the Chinese national and business cultures which every company operating in China will be dealing with, and offers examples of how these affect a high tech company. The study was conducted as a case study of a Finnish high technology company running a project in China. The company encountere...

  6. PROCESS MANAGEMENT IN HIGH TECH NEW ZEALAND FIRMS

    LINCOLN WOOD; QIANG LU

    2008-01-01

    There are three distinct functions in the product realization chain — product design, process design, and process execution; thus there are two interfaces (product design — process design; process design — process execution) rather than one (product-manufacturing). Case studies of four organizations manufacturing high-tech products in New Zealand are explored to study the organization of process design functions and success strategies. Similarities in structuring, relationships between functi...

  7. FUNDAMENTALIZATION OF ICT LEARNING IN MODERN HIGH TECH ENVIRONMENT

    M. P. Shyshkina

    2013-03-01

    Full Text Available The article outlines the features of the process of fundamentalization of ICT learning, educational background to ensure it in high school. The concept of fundamental knowledge and its role in training of a specialist is described. The problems of access to qualitative education, particularly to electronic learning resources in modern high-tech environment are revealed. The role of computer mathematics as a tool of ICT learning fundamentalization is emphasized.

  8. Capturing the real value in high-tech acquisitions.

    Chaudhuri, S; Tabrizi, B

    1999-01-01

    Eager to stay ahead of fast-changing markets, more and more high-tech companies are going outside for competitive advantage. Last year in the United States alone, there were 5,000 high-tech acquisitions, but many of them yielded disappointing results. The reason, the authors contend, is that most managers have a shortsighted view of strategic acquisitions--they focus on the specific products or market share. That focus might make sense in some industries, where those assets can confer substantial advantages, but in high tech, full-fledged technological capabilities--tied to skilled people--are the key to long-term success. Instead of simply following the "buzz," successful acquires systematically assess their own capability needs. They create product road maps to identify holes in their product line. While the business group determines if it can do the work in-house, the business development office scouts for opportunities to buy it. Once business development locates a candidate, it conducts an expanded due diligence, which goes beyond strategic, financial, and legal checks. Successful acquires are focused on long-term capabilities, so they make sure that the target's products reflect a real expertise. They also look to see if key people would be comfortable in the new environment and if they have incentives to stay on board. The final stage of a successful acquisition focuses on retaining the new people--making sure their transition goes smoothly and their energies stay focused. Acquisitions can cause great uncertainty, and skilled people can always go elsewhere. In short, the authors argue, high-tech acquisitions need a new orientation around people, not products.

  9. Educating Students to Boost Innovation and High-tech Entrepreneurship

    Berg, Rolf Henrik

    . A key challenge faced by entrepreneurs aiming at starting their “own” high-tech company is the high costs and, thereby, the difficulty of accessing appropriate amount of financing without quickly losing ownership and hence incentive in their business. One possible solution is customer-based financing...... something with a culture, something that permeates the way one thinks of. Educating students in an innovative research environment is key to inspiring them to think commercially. It is in this light, among others, that one should view the advantages of close collaboration between academia and industry...

  10. Come and see our new high-tech products!

    GS Department

    2010-01-01

    Since 1977, GMP has been active in the fields of laser, spectroscopy, electro-optics and micropositioning. Its mission is to link between suppliers of high tech products with the end users. On Wednesday 26 May between 10 and 12 a.m. - Room A, Main Building, (Bldg. 61/1-017) - you will be able to touch and try out our new laser products. Our specialized engineers will also be on hand to answer all your questions. A drink will be offered at the end of the presentation. There will also be the opportunity to plan meetings in the afternoon to further discuss and complicated questions.

  11. High-tech Entrepreneurship and Growth: Myths and Facts

    Neergaard, Helle; Madsen, Henning; Ulhøi, John Parm

    2004-01-01

    Economic growth depends on the presence of an innovative and dynamic business sector, including the business players' ability to discover and exploit new business opportunities. Consequently, entrepreneurship has received increased attention within industrial policy. Entrepreneurs and their motives...... are, however, just as diverse as the rest of the population, thus making it impossible to apply a 'one-size-fits-all' principle when promoting entrepreneurship. This paper deals with a special kind of entrepreneurs - the high-tech entrepreneurs - in order to puncture the myths concerning their growth...

  12. Relationship Between Market Orientation and Business Performance in Czech and German High-Tech Firms

    Patrik Jangl

    2015-12-01

    Full Text Available The main goal of this paper is to find out an index of market orientation, and explore the relationship between four components of market orientation in high-tech firms and their business performance. Business performance was studied as a one-dimensional construct. Market orientation in this study is defined as a process of intelligence generation about customers and competitors, intelligence dissemination and integration within the company across teams, and responsiveness to market intelligence in the form of coordinated action. The statistical sample was represented by 164 Czech and 187 German high-tech firms in the manufacturing industry. Respondents (sales and marketing managers completed a questionnaire and marked their rate of approval with individual statements on a Likert scale ranging from 1 to 7. Market orientation and business performance level was determined as the arithmetic mean (x̄ of the measured values. Depending on the size of the total market orientation index (MOI, Czech (x̄=5.2 and German (x̄=5.14 high-tech firms are medium market-oriented. The business performance index (BPI reached a slightly higher value in Germany (x̄=5.22 as compared to the Czech Republic (x̄=5.13. The main method to reach the target was correlation and regression analysis. This study confirmed a hypothesis about the existence of a correlation between components of market orientation and business performance. Three of the four relationships in the multiple regression model were significant. On the other hand, the study found no positive significant correlation between competitor intelligence generation and business performance.

  13. High-tech processing of secondary resources of winemaking

    G. Kasyanov

    2017-04-01

    Full Text Available The information about problems and prospects of development of food production processes based on high-tech and knowledge-intensive technical solutions is presented. To accomplish these objectives the problems of rational growing of grapes, intensive methods of production of conventional and concentrated grape juice, application of CO2ditartration for the removal of wine stone were solved.White and red table grapes, grape pomace, grape seed oil, protein and CO2-meal are the objects of the research. To evaluate the quality of raw materials, intermediate and finished products such devices as gas-liquid and thin-layer chromatography, and spectrophotometer were used. Obtaining of grape juice of white and red grapes with content of tartaric acid salts less than 1 %, food drying products and products of processing of grape pomace are the intermediate results of the research. Grape juice in flexible packages of «Pure-Pak» and «Doy-pack» types, CO2-extracts of seeds and skins of grapes and protein CO2-meal are the final objects of the research. Performed research allows us to make conclusions about expediency of high-tech methods of processing of raw materials for obtaining food products.

  14. The Methodical Instrumentarium for Analytical Monitoring of Markets for High-Tech Products

    Mikaelian Suren G.

    2017-10-01

    Full Text Available The article is aimed at clarifying the essential characteristics of high-tech products and specifying the features of analytical monitoring of markets for high-tech products. The conceptual approaches to interpretation of the essence of high-tech products as a basic concept in the categorical apparatus for researching the systemic and complex processes of technological development have been clarified. The most efficient instruments for assessing innovation processes in the high-tech sphere have been systematized. The methodical instrumentarium for analytical monitoring of the markets for high-tech products has been clarified. The terminology of a high-tech product has been clarified in order to formulate the methodical instrumentarium for analytical monitoring of market for high-tech products. It has been determined that «high-tech products» are the original basic concept in the categorical apparatus for researching the systemic and complex processes of the high-tech market that needs to be concretized. Conceptual approaches to the essence of high-tech products have been systematized.

  15. Design of demand driven return supply chain for high-tech products

    Jalal Ashayeri

    2011-10-01

    Full Text Available Purpose: The purpose of this study is to design a responsive network for after-sale services of high-tech products. Design/methodology/approach: Analytic Hierarchy Process (AHP and weighted max-min approach are integrated to solve a fuzzy goal programming model. Findings: Uncertainty is an important characteristic of reverse logistics networks, and the level of uncertainty increases with the decrease of the products’ life-cycle. Research limitations/implications: Some of the objective functions of our model are simplified to deal with non-linearities. Practical implications: Designing after-sale services networks for high-tech products is an overwhelming task, especially when the external environment is characterized by high levels of uncertainty and dynamism. This study presents a comprehensive modeling approach to simplify this task. Originality/value: Consideration of multiple objectives is rare in reverse logistics network design literature. Although the number of multi-objective reverse logistics network design studies has been increasing in recent years, the last two objective of our model is unique to this research area.

  16. The marketing of high-tech innovation: research and teaching as a multidisciplinary communication task

    Hasenauer, Rainer; Fi8lo, Peter; Störi, Herbert

    2013-01-01

    Economically successful high-tech innovation is one of the driving forces for global welfare. Like innovation half-life, break-even time to market or technology acceptance, effective multidisciplinary communication between engineering and marketing is a critical success factor. This paper aims to show the requirements of multidisciplinary communication in B2B marketing of high-tech innovation and methodical approaches in research and academic education: 1. Requirements in high-tech innovat...

  17. Knowledge acquisition and creation in the high-tech industry

    Juliano Pavanelli Stefanovitz

    2007-10-01

    Full Text Available This paper explores the new challenges that come with the emergence of knowledge-based approaches on organizational studies. It is widely recognized, in this context, the increasing importance of understanding the processes through which companys acquire, storage, disseminate and create knowledge. This research analysis the knowledge creation and external acquisition processes in the high-tech industry, environment in which intensive use of knowledge is made. For that, it presents a case study of an R&D Division of a company present in the industrial automation market. In recognition of its innovative competence, this company won the FINEP Prize – Technological Innovation. In this study, besides the identification of the main external knowledge sources, an analysis of the knowledge types conversion observed in its product development activities is made.

  18. Creating a vibrant innovation ecosystem : the High Tech Campus Eindhoven case

    Romme, A.G.L.

    2017-01-01

    The High Tech Campus Eindhoven is a campus-based ecosystem for high-tech R&D, located in the city of Eindhoven (Netherlands). It is currently home to more than 140 companies and institutions, involving more than 10,000 product developers, researchers, entrepreneurs, and service providers. The

  19. The Wassenaar Arrangement and Russian High-Tech Export

    Lilia S. Revenko

    2016-01-01

    Full Text Available The current military and political situation in the world raises the necessity of use by Russia of all existing tools to counter actions targeted against it. Participation of the country in international export control regimes, including the Wassenaar Arrangement (the WA, is one of these tools. Membership in the WA allows to Russia to maintain its international status, to contribute to strengthening of international stability, to ensure the non-targeting of this forum against the country, to participate in the development of decisions affecting its interests. Participation in the WA is also important from the view of modernizations of Russian economy towards transition to a new technological mode accompanied by emergence of new groups of innovative products and modification of existing ones. Control of crossing the country's borders by dual-use goods and services is one of conditions for carrying out their export. The Wassenaar Arrangement was established in 1995 to replace COCOM in order to contribute to regional and international security and stability. A huge work is carried out within the forum aimed at enhancing control over transfers of conventional weapons and high-tech dual-use goods. Russian export control system fully meets requirements of international export control regime, including the WA, and effectively functions. Export of the controlled goods from Russia or their transfer to foreign individuals and legal entities are possible only on the basis of decisions of the Export control Commission of the Russian Federation. The dilemma between the need to support exporters by reducing administrative barriers and the ensuring security interests of the country gain momentum in current stage of scientific-and-technological advance development.

  20. Reconciliation of high-tech and high-touch for SME innovation performance in Indonesia

    RIDUAN R.

    2017-01-01

    The euphoria of technology in the Internet of Things (IOT) era is not only more advantageous but also provides double-edged sword effect for high-tech SMEs. In general, high-tech SMEs have a dependence on technology and neglect high touch aspect capacity to build relationships with human resources. Ironically, it is otherwise allegedly in an action as it is assumed to cause innovation imbalance where the product of SME innovation is high-tech but low-touch. Given its importance, this study ai...

  1. 'Experience the future of building technologies'. High tech, low energy

    NONE

    2005-07-01

    These proceedings cover the contributions presented at the CLIMA 2005 conference held in Lausanne, Switzerland. This four-day conference was sponsored by a large number of companies and organisations active in the Swiss building technologies area. Several keynote lectures were presented as were awards to students active in the building technical services area. The proceedings document the papers presented at the conference. These covered nine main topics. The first, 'Air-conditioning and ventilation' comprised 43 papers on the indoor environment, 15 on room air distribution, 4 on hygiene, 11 on alternative cooling methods, 8 on air-flow, 2 on air-cleaning and filters, 6 on refurbishment and even one concerning air-flow predictions in Egyptian tombs. The second topic, 'Heating', comprised 13 contributions on low-temperature heating and heat pumps, 7 on distributed energy systems, 4 on district heating, 7 on solar heating systems and 3 miscellaneous items. 'Design methods' were examined as a third topic with 11 contributions on building-simulation tools and 26 on computer-based methods for design, construction and operation. In the fourth section, 'Refrigeration', papers were presented on new working fluids (3 contributions), modernisation (5) along with 4 miscellaneous papers. 'Policies, standards and building-codes' were examined in four categories: Implementation of the European Energy Performance Directive with 8 contributions, life-cycle costs with 2 papers, energy conservation with 15 contributions and 2 contributions in the miscellaneous category. 'Domestic water systems and sanitary technology', the sixth section, includes 3 contributions on water conservation. Section 7, 'Building automation, security and control' includes a section on information and communication systems (3 contributions) and 6 various papers. Section 8, 'Building physics and HVAC' includes 8 contributions on double-skin and high-tech building envelopes, 7 on moisture control, and one on

  2. 14th High-Tech Plasma Processes Conference (HTPP 14)

    2017-04-01

    Preface The High-Tech Plasma Processes Conference (HTPP) is a bi-annual international conference based in Europe with topics encompassing the whole area of plasma processing science. This conference is open to all the international community in the world involved in plasma science and plasma technology. The aim of the conference is to bring different scientific communities together, facilitate the contacts between science, technology and industry and provide a platform for the exploration of both fundamental topics and new applications of plasmas. For this edition of HTPP, as was the case for the last, we have achieved a well balanced participation from the communities of both thermal and non-thermal plasma researchers. 75 people from 17 countries attended the conference with the total number of contributions being 74, consisting of 19 invited talks and 55 poster contributions. As a HTPP tradition a poster competition has been carried out during the conference. The winner of the poster competition was Fabrice Mavier from Université de Limoges, France with his paper “Pulsed arc plasma jet synchronized with drop-on-demand dispenser” All the participants also ejoyed the social program including an “unconventional” tour of the city, the visit to the famous Hofbräuhaus and the dinner at the Blutenburg, a beautiful inner-city castle. We have received papers corresponding to the contributions of HTPP-2014 that have been submitted for publication in this volume of Journal of Physics: Conference Series. Each submitted contribution has been peer reviewed and the Editors are very grateful to the referees for their careful support in improving the original manuscripts. In total, 18 manuscripts have been accepted for publication covering a range of topics of plasma processing science from plasma fundamentals to process applications through to experiments, diagnostics and modelling. We deeply thank the authors for their enthusiastic and high-grade contributions and we

  3. Kalam's visit to cement Indo-Swiss ties in high tech area

    Sumir, Paul

    2005-01-01

    Seeking to boost Indo-Swiss cooperation in high tech areas, President APJ Abdul Kalam arrived in Geneva on a four-day visit to Switzerland aimed at firming up plans for future cooperation with the CERN

  4. High-tech industries' overseas investment performance evaluation - Application of data envelopment analysis

    Ridong Hu

    2013-12-01

    Full Text Available With the rapid change of the social environment, Mainland China has become a new economic market due to the great domestic demand caused by its enormous population and the increasing economic growth rate. Taiwanese businesses have gradually turned to develop in China under the pressure of increasing domestic wages and land costs for expanding factories as well as the enhancement of environmental protection. Mainland China presents the advantages of ample land, low labor costs, monoethnicity, and easy language communication making it an attractive major investment location for Taiwanese high-tech industries. Data Envelopment Analysis (DEA is applied to measure overseas investment efficiency evaluation of Taiwanese high-tech businesses in China, where the Delphi Method is used for selecting the inputs of the number of employees, R&D expenses, and gross sales in total assets. Sensitivity Analysis is further utilized for acquiring the most efficient unit and individual units with operating efficiency. The research results show that 1.Three high-tech businesses that present constant returns to scale perform optimally with overseas investment efficiency 2.Two high-tech companies with decreasing returns to scale appear that they could improve the overseas investment efficiency by decreasing the scale to enhancing the marginal returns, and 3.Sixteen high-tech enterprises reveal increasing returns to scale, showing that they could expand the scale to enhance the marginal returns and further promote efficiency.

  5. Collaborative Innovation Research on High-tech Industry in the Center Delta

    Yan Jingdong

    2017-01-01

    Full Text Available As a strong point in the Middle Rises Strategy, the Center Delta is of great significance to high-tech industry development. While the collaborative innovation is an effective way to promote the coordinated development of regional economy. This article selected electronic and communication equipment manufacturing industry of 3 provinces in the Center Delta as samples, built evaluation index system of collaborative innovation of high-tech industry, and put the relevant data into the system coordination degree model, in order to get the synergy of industrial innovation system and innovation environment system of 3 provinces. The empirical results shown that the industrial innovation system and innovation environment system coordination degree of Hubei province was the highest, while Jiangxi province was the lowest. Based on the empirical result analysis of the above-mentioned systems, this article put forward suggestions to promote the development of the high-tech industry collaborative innovation in the Center Delta.

  6. Is China only assembling parts and components?: the recent spurt in high tech industry

    Marcelo José Braga Nonnenberg

    2012-08-01

    Full Text Available The purpose of this paper is to evaluate to which degree China is climbing up the technology ladder and increasing its domestic content in high tech industry. More specifically, we will assess whether China has increased its share in world trade of high tech goods and, at the same time, increased its domestic content, changing its role from a mere final assembler to a producer of more intense technology goods. We have built an indicator of domestic value added calculated as the difference between exports of final goods and imports of its parts and components. The main conclusion is that this measure has increased significantly since the early 1990ís, putting in evidence the profound changes that occurred in Chinaís high tech exports in the last two decades.

  7. Determinants of investment in fixed assets and in intangible assets for high-tech firms

    Paulo Maçãs Nunes

    2017-05-01

    Full Text Available Based on a sample of 141 Portuguese high-tech firms for the period 2004-2012 and using GMM system (1998 and LSDVC (2005 dynamic estimators, this paper studies whether the determinants of high-tech firms’ investment in fixed assets are identical to the determinants of their investment in intangible assets. The multiple empirical evidence obtained allows us to conclude that the determinants of their investment in fixed assets are considerably different from those of their investment in intangible assets. Debt is a determinant stimulating investment in fixed assets, with age being a determinant restricting such investment. Size, age, internal finance and GDP are determinants stimulating investment in intangible assets, whereas debt and interest rates restrict such investment. These results let us make important suggestions for the owners/managers of high-tech firms, and also for policy-makers.

  8. The effects of incubation on academic and non-academic high-tech start-ups: evidence from Italy

    Colombo, Massimo G.; Piva, Evila; Rentocchini, Francesco

    2012-01-01

    This study aims at empirically investigating whether technology incubators help academic high-tech start-ups to establish collaborations with other organizations, thus increasing the competitiveness of these firms. In doing so, we take into account the specificities of academic high-tech start-ups with respect to their non-academic counterparts. We compare the effects of incubation on academic and non-academic high-tech start-ups through econometric estimates using a large sample of Italian f...

  9. INNOVATIVE MODELS OF EDUCATION AND TRAINING OF SKILLED PERSONNEL FOR HIGH TECH INDUSTRIES IN UKRAINE

    M.Shyshkina

    2013-03-01

    Full Text Available The problems of development of innovative learning environment of continuous education and training of skilled personnel for high-tech industry are described. Aspects of organization of ICT based learning environment of vocational and technical school on the basis of cloud computing and outsourcing are revealed. The three-stage conceptual model for perspective education and training of workers for high-tech industries is proposed. The model of cloud-based solution for design of learning environment for vocational education and training of skilled workers is introduced.

  10. High Touch and High Tech (HT2) Proposal: Transforming Patient Engagement Throughout the Continuum of Care by Engaging Patients with Portal Technology at the Bedside.

    McAlearney, Ann Scheck; Sieck, Cynthia J; Hefner, Jennifer L; Aldrich, Alison M; Walker, Daniel M; Rizer, Milisa K; Moffatt-Bruce, Susan D; Huerta, Timothy R

    2016-11-29

    For patients with complex care needs, engagement in disease management activities is critical. Chronic illnesses touch almost every person in the United States. The costs are real, personal, and pervasive. In response, patients often seek tools to help them manage their health. Patient portals, personal health records tethered to an electronic health record, show promise as tools that patients value and that can improve health. Although patient portals currently focus on the outpatient experience, the Ohio State University Wexner Medical Center (OSUWMC) has deployed a portal designed specifically for the inpatient experience that is connected to the ambulatory patient portal available after discharge. While this inpatient technology is in active use at only one other hospital in the United States, health care facilities are currently investing in infrastructure necessary to support large-scale deployment. Times of acute crisis such as hospitalization may increase a patient's focus on his/her health. During this time, patients may be more engaged with their care and especially interested in using tools to manage their health after discharge. Evidence shows that enhanced patient self-management can lead to better control of chronic illness. Patient portals may serve as a mechanism to facilitate increased engagement. The specific aims of our study are (1) to investigate the independent effects of providing both High Tech and High Touch interventions on patient-reported outcomes at discharge, including patients' self-efficacy for managing chronic conditions and satisfaction with care; and (2) to conduct a mixed-methods analysis to determine how providing patients with access to MyChart Bedside (MCB, High Tech) and training/education on patient portals, and MyChart Ambulatory (MCA, High Touch) will influence engagement with the patient portal and relate to longer-term outcomes. Our proposed 4-year study uses a mixed-methods research (MMR) approach to evaluate a

  11. Desert pioneers go high tech in uranium project

    1988-01-01

    The Kintyre uranium deposit discovered in 1985 in Western Australia's Great Sandy Desert by CRA Exploration is a highly competitive, easy to mine deposit, estimated at 35,000 tonnes of uranium oxide. Since its discovery CRA has spent $20 million on evaluation drilling and exploration and will spend another $10 million in 1988. Despite its remoteness the latest technology is being used, with sophisticated computer and assaying facilities, including an automatic X-ray fluorescence spectrometer, being established on site. A CRA-built radiometric ore sorter is being tested there which could cut ore processing costs

  12. Applications of Nuclear Analytical Methods for High Tech Industry

    Hossain, T.

    2013-01-01

    Silicon based semiconductor chip manufacturing is a worldwide high technology industry with numerous measurement issues. One of the major concerns in the semiconductor manufacturing is contamination such as the trace metal impurities. This concern is vividly illustrated by the fact that the manufacturing in this industry is done in ultra clean environment where the entire manufacturing facility or “Fab” is a clean room facility or each and every manufacturing tool is enclosed in a mini-environment Although semiconductor devices are fabricated on the surface of the Si wafers contamination in the bulk material is a major concern. Nuclear methods of analysis are uniquely suited for the contamination analysis in such a matrix. Many opportunities in the semiconductor manufacturing field exist for the nuclear methods to provide support services. Contamination analysis by NAA, depth profiles by NDP and prompt gamma analysis of H in thin films are a few examples. These needs are on-going and require commitment from the lab so that a manufacturing operation can rely on the delivery of these services when required

  13. The content and role of formal contracts in high-tech alliances

    de Jong, Gjalt; Woolthuis, Rosalinde Ja Klein

    2009-01-01

    In this study we investigate the governance structure of innovation processes in high-tech alliances, focusing on the content and role of formal contracts. The design of a formal agreement is one of the most important strategic decisions for alliance partners. Drawing upon transaction cost arguments

  14. Design of Demand Driven Return Supply Chain for High-Tech Products

    Ashayeri, J.; Tuzkaya, G.

    2010-01-01

    Many high-tech supply chain operate in a context of high process and market uncertainties due to shorter product life cycles. When introducing a new product, a company must manage the cost of supply, including the cost of returns over its short life cycle. The returns distribution looks like a

  15. Determining Studies Conducted upon Individuals with Autism Spectrum Disorder Using High-Tech Devices

    Eliçin, Özge; Kaya, Ali

    2017-01-01

    This study explores 67 experimental research articles written about children with Autism Spectrum Disorder using high-tech devices. The studies in this research were accessed through EBSCO, Academic Search Complete, ERIC, and Uludag University online search engines using keywords such as "autism and technology", "autism and…

  16. A World of Competitors: Assessing the US High-Tech Advantage and the Process of Globalisation

    Douglass, John Aubrey

    2008-01-01

    Research universities throughout the world are part of a larger effort by countries to bolster science and technological innovation and compete economically. The United States remains highly competitive as a source of high-tech innovation because of a number of market positions, many the results of long-term investments in institutions (such as…

  17. Information in launch messages : stimulating the adoption of new high-tech consumer products

    Talke, K.S.S.; Snelders, Dirk

    2013-01-01

    This research investigates how the adoption of new high-tech consumer products can be stimulated by communicating product-related information in launch messages. In an initial pilot study, the authors find that for making an adoption decision, consumers require different types of product-related

  18. Knowledge virtualization and local connectedness among smart high-tech companies

    Van Geenhuizen, M.S.; Nijkamp, P.

    2011-01-01

    Smart high-tech companies are characterized by knowledge intensity and open innovation. Even when these companies emerge in spatial clusters or dense urban places, they may utilize knowledge networks on a global scale. However, there is not much insight into the factors that shape knowledge

  19. The institutional arrangements of innovation: Antecedents and performance effects of trust in high-tech alliances

    Jong, G.; Klein Woolthuis, R.J.A.

    2008-01-01

    In this study we investigate the institutional arrangements of innovation processes in high-tech alliances, focusing on the role of trust. A major strength of the research is the opportunity to address antecedents as well as performance effects of trust. The antecedents of interorganizational trust

  20. Vraaggestuurd Programma 2012-2014. Voortgangsrapportage 2013, VP Security, Thema VII High Tech Systemen en Materialen

    Don, J.A.

    2014-01-01

    De roadmap Security voor topsector High Tech Systems & Materials wordt gedragen door een breed consortium van bedrijven, overheden, TNO, NLR en STW/NWO (zie www.htsm.nl). Onder regie van het roadmapteam Security is het plan 2013 voor TNO-Vraaggestuurd Onderzoeksprogramma Security 2012-2014 opgesteld

  1. Silicon Valley: Planet Startup : Disruptive Innovation, Passionate Entrepreneurship & High-tech Startups

    dr. A. Maas; Dr. P. Ester

    2016-01-01

    For decades now, Silicon Valley has been the home of the future. It's the birthplace of the world's most successful high-tech companies-including Apple, Yahoo, Google, Facebook, Twitter, and many more. So what's the secret? What is it about Silicon Valley that fosters entrepreneurship and

  2. Best new product development and management practices in Korean high-tech industry

    Song, X.M.; Noh, J.

    2006-01-01

    This paper investigates critical factors affecting the likelihood of new product success and effective new product development (NPD) models for Korean high-tech firms. Empirical results suggest that successful projects differ from unsuccessful projects in project environment, skills and resources,

  3. A multi-disciplinary and model-based design methodology for high-tech systems

    Heemels, W.P.M.H.; Waal, van de E.; Muller, G.J.

    2006-01-01

    System architecting for high-tech machines is currently performed by highly experienced individuals, who often use an intuitive approach to their craft. In order to allow better cooperation, and to enable the dissemination of experience and knowledge, a framework is needed in which the methods,

  4. Are You What You Eat? An inside Look at High-Tech Food

    Miller, Roxanne Greitz

    2007-01-01

    If we abide by the familiar saying "you are what you eat," it is understandable that people may be concerned with the incredible advances in food science technology and their possible impacts on human health. For example, in recent years high-tech scientific processes such as genetic modification, irradiation, and cloning have all been used to…

  5. High-Tech Betrayal: Working and Organizing on the Shop Floor.

    Devinatz, Victor G.

    This book, which is based on a 7-month ethnographic study of working conditions and employment practices at a biomedical electronics factory, examines the impact that high tech has had on the relationship between management and workers in the manufacturing industry. The following are among the topics discussed in the book's 10 chapters: (1) the…

  6. Hagerstown Community College: Building a High Tech Base.

    Regional Technology Strategies, Inc., Carrboro, NC.

    This document describes the Advanced Technology Center (ATC) at Hagerstown Community College (HCC) (Maryland), created in 1990 as a response to the region's economic decline. The ATC is a partnership between the College, industry, and government to help promote industrial modernization and regional competitiveness through training, demonstration,…

  7. CMS inaugurates its high-tech visitor centre

    Antonella Del Rosso

    2014-01-01

    The new Building SL53 on CERN’s Cessy site in France is ready to welcome the thousands of visitors (30,000 in 2013) who come to learn about CMS each year. It boasts low energy consumption and the possibility, in the future, of being heated by recycling the heat given off by the detector.   The new Building SL53 at CERN’s Cessy site in France will be inaugurated on 24 May 2014. “Constructed by the GS Department and the firm Dimensione, the building meets the operational requirements of the CMS experiment, which require the uninterrupted use of its infrastructure,” explains Martin Gastal, the member of the collaboration in charge of the project. Its 560 m2 surface area features a meeting room, eight offices, an open space for CMS users, a rest area with a kitchen, sanitary facilities including showers, and a conference room in which to receive visitors. “The new conference room on the ground floor can accommodate 50 people,&am...

  8. Patient Autonomy in a High-Tech Care Context - A Theoretical Framework.

    Lindberg, Catharina; Fagerström, Cecilia; Willman, Ania

    2018-06-12

    To synthesise and interpret previous findings with the aim of developing a theoretical framework for patient autonomy in a high-tech care context. Putting the somewhat abstract concept of patient autonomy into practice can prove difficult since when it is highlighted in healthcare literature the patient perspective is often invisible. Autonomy presumes that a person has experience, education, self-discipline and decision-making capacity. Reference to autonomy in relation to patients in high-tech care environments could therefore be considered paradoxical, as in most cases these persons are vulnerable, with impaired physical and/or metacognitive capacity, thus making extended knowledge of patient autonomy for these persons even more important. Theory development. The basic approaches in theory development by Walker and Avant were used to create a theoretical framework through an amalgamation of the results from three qualitative studies conducted previously by the same research group. A theoretical framework - the control-partnership-transition framework - was delineated disclosing different parts co-creating the prerequisites for patient autonomy in high-tech care environments. Assumptions and propositional statements that guide theory development were also outlined, as were guiding principles for use in day-to-day nursing care. Four strategies used by patients were revealed: the strategy of control, the strategy of partnership, the strategy of trust, and the strategy of transition. An extended knowledge base, founded on theoretical reasoning about patient autonomy, could facilitate nursing care that would allow people to remain/become autonomous in the role of patient in high-tech care environments. The control-partnership-transition framework would be of help in supporting and defending patient autonomy when caring for individual patients, as it provides an understanding of the strategies employed by patients to achieve autonomy in high-tech care contexts. The

  9. Innovative Behaviour of High-Tech Internationalized Firms: Survey Results from Poland

    Krzysztof Wach

    2016-09-01

    Full Text Available Objective: The aim of the article is to identify and verify the relationship between internationalization and innovativeness as well as innovative behaviour of high-tech businesses in Polish context. Research Design & Methods: A quantitative research design was employed. A survey was conducted on the sample of 263 firms operating in high-tech industries in Poland. To verify the assumed relationships statistical instruments were used, including descriptive statistics, Chi-Square test, the Kruskal-Wallis test and multivariate regression. Findings: The level of innovativeness of investigated hi-tech firms was relatively high. Results suggest that the innovativeness of a business contributes to the intensification of the internationalization process of firms operating in high-tech industries. The regression model confirms the dependence of internationalization on three innovative behaviours, such as the general evaluation of innovativeness of the firm, the pace of innovation diffusion and the number of implemented innovations. Implications & Recommendations: Polish high-tech businesses seem to be relatively well internationalized, especially in comparisons to general business population. Policy makers should continue to support innovativeness of Polish economy, but especia­lly these industries which are highly innovative. Contribution & Value Added: The research presented in the article seems to be one of the first in Poland investigating into internationalization and innovation in high-tech industries. The results are in line with the majority of empirical evidence worldwide. The preliminary link between innovation and internationalization among Polish high–tech businesses was confirmed.

  10. An Optimized Grey Dynamic Model for Forecasting the Output of High-Tech Industry in China

    Zheng-Xin Wang

    2014-01-01

    Full Text Available The grey dynamic model by convolution integral with the first-order derivative of the 1-AGO data and n series related, abbreviated as GDMC(1,n, performs well in modelling and forecasting of a grey system. To improve the modelling accuracy of GDMC(1,n, n interpolation coefficients (taken as unknown parameters are introduced into the background values of the n variables. The parameters optimization is formulated as a combinatorial optimization problem and is solved collectively using the particle swarm optimization algorithm. The optimized result has been verified by a case study of the economic output of high-tech industry in China. Comparisons of the obtained modelling results from the optimized GDMC(1,n model with the traditional one demonstrate that the optimal algorithm is a good alternative for parameters optimization of the GDMC(1,n model. The modelling results can assist the government in developing future policies regarding high-tech industry management.

  11. Using a Mixed Model to Evaluate Job Satisfaction in High-Tech Industries.

    Sang-Bing Tsai

    Full Text Available R&D professionals are the impetus behind technological innovation, and their competitiveness and capability drive the growth of a company. However, high-tech industries have a chronic shortage of such indispensable professionals. Accordingly, reducing R&D personnel turnover has become a major human resource management challenge facing innovative companies. This study combined importance-performance analysis (IPA with the decision-making trial and evaluation laboratory (DEMATEL method to propose an IPA-DEMATEL model. Establishing this model involved three steps. First, an IPA was conducted to measure the importance of and satisfaction gained from job satisfaction criteria. Second, the DEMATEL method was used to determine the causal relationships of and interactive influence among the criteria. Third, a criteria model was constructed to evaluate job satisfaction of high-tech R&D personnel. On the basis of the findings, managerial suggestions are proposed.

  12. Stakeholder engagement in patient-centered outcomes research: high-touch or high-tech?

    Lavallee, Danielle C; Wicks, Paul; Alfonso Cristancho, Rafael; Mullins, C Daniel

    2014-06-01

    Patient and stakeholder engagement enhances the meaningfulness of patient-centered outcomes research. Continuous engagement of diverse patients helps to achieve representativeness and to avoid tokenism, but is perceived as challenging due to resource and time constraints. The widespread availability of the internet, mobile phones, and electronic devices makes 'high-tech' solutions appealing, but such approaches may trade-off larger sample sizes for shallower engagement and/or skewed perspectives if most participants reflect users of technology. More traditional 'high-touch' solutions such as in-person interviews, focus groups, and town hall meetings can provide qualitative and sociological context and potentially more in-depth insights from small numbers of patients, but such approaches are also prone to selection bias as well. We compare and contrast high-tech and high-touch approaches to engaging stakeholders and suggest hybrid processes.

  13. A Concept of Constructing a Common Information Space for High Tech Programs Using Information Analytical Systems

    Zakharova, Alexandra A.; Kolegova, Olga A.; Nekrasova, Maria E.

    2016-04-01

    The paper deals with the issues in program management used for engineering innovative products. The existing project management tools were analyzed. The aim is to develop a decision support system that takes into account the features of program management used for high-tech products: research intensity, a high level of technical risks, unpredictable results due to the impact of various external factors, availability of several implementing agencies. The need for involving experts and using intelligent techniques for information processing is demonstrated. A conceptual model of common information space to support communication between members of the collaboration on high-tech programs has been developed. The structure and objectives of the information analysis system “Geokhod” were formulated with the purpose to implement the conceptual model of common information space in the program “Development and production of new class mining equipment - “Geokhod”.

  14. Using a Mixed Model to Evaluate Job Satisfaction in High-Tech Industries.

    Tsai, Sang-Bing; Huang, Chih-Yao; Wang, Cheng-Kuang; Chen, Quan; Pan, Jingzhou; Wang, Ge; Wang, Jingan; Chin, Ta-Chia; Chang, Li-Chung

    2016-01-01

    R&D professionals are the impetus behind technological innovation, and their competitiveness and capability drive the growth of a company. However, high-tech industries have a chronic shortage of such indispensable professionals. Accordingly, reducing R&D personnel turnover has become a major human resource management challenge facing innovative companies. This study combined importance-performance analysis (IPA) with the decision-making trial and evaluation laboratory (DEMATEL) method to propose an IPA-DEMATEL model. Establishing this model involved three steps. First, an IPA was conducted to measure the importance of and satisfaction gained from job satisfaction criteria. Second, the DEMATEL method was used to determine the causal relationships of and interactive influence among the criteria. Third, a criteria model was constructed to evaluate job satisfaction of high-tech R&D personnel. On the basis of the findings, managerial suggestions are proposed.

  15. Knowledge Organisations and High-Tech Regional Innovation Systems in Developing Countries: Evidence from Argentina

    Carolina Pasciaroni

    2016-06-01

    Full Text Available In the globally and knowledge based economy, the universities and other knowledge organisations are valued for their ability to contribute to the regional innovation processes. This is particularly relevant for the developing countries in South America since their R&D spending is highly concentrated on the public knowledge infrastructure. However, there are few studies examining the role of knowledge organizations at regional level in Latin America. The proposed study aims to analyse the role played by knowledge organisations in the formation of a high-tech Regional Innovation Systems in Argentina. This country has a number of attractive features relative to the positive evolution of its R&D spending and the recent implementation of a policy that promotes cooperation between firms and knowledge organisations among high-tech sectors. As evidenced in developed regions, the organisations under study play a key role in the promotion of a high-tech Regional Innovation Systems. However, this prominent role is not based on those local factors identified in the literature, such as organisational and institutional local assets, but on national science and technology policies and individual initiatives conducted by the faculties involved.

  16. Effects of job-related stress and burnout on asthenopia among high-tech workers.

    Ostrovsky, Anat; Ribak, Joseph; Pereg, Avihu; Gaton, Dan

    2012-01-01

    Eye- and vision-related symptoms are the most frequent health problems among computer users. The findings of eye strain, tired eyes, eye irritation, burning sensation, redness, blurred vision and double vision, when appearing together, have recently been termed 'computer vision syndrome', or asthenopia. To examine the frequency and intensity of asthenopia among individuals employed in research and development departments of high-tech firms and the effects of job stress and burnout on ocular complaints, this study included 106 subjects, 42 high-tech workers (study group) and 64 bank employees (control group). All participants completed self-report questionnaires covering demographics, asthenopia, satisfaction with work environmental conditions, job-related stress and burnout. There was a significant between-group difference in the intensity of asthenopia, but not in its frequency. Burnout appeared to be a significant contributing factor to the intensity and frequency of asthenopia. This study shows that burnout is a significant factor in asthenopic complaints in high-tech workers. This manuscript analyses the effects of psychological environmental factors, such as job stress and burnout, on ocular complaints at the workplace of computer users. The findings may have an ergonomic impact on how to improve health, safety and comfort of the working environment among computer users, for better perception of the job environment, efficacy and production.

  17. Management of logistics chains of industrial enterprises in high-tech industries

    Demchenko Alexander

    2017-01-01

    Full Text Available The article analyses the trends of high-tech industries development in the market globalization conditions. The economic growth of high-tech industries largely depends on technological innovations, products and equipment based on usage of the results of applied and fundamental scientific researches. It is shown that characteristics of high-tech productions influence the logistics chain structure. It justifies the importance to include partnering enterprises taking part in creation of intellectual and tangible assets in the logistic chain of the industrial enterprise. It is noted that development of production technologies contributes to formation of innovative logistic chains, which participants are enterprises cooperating for achievement of competitive power. The article offers a model of an industry logistic chain comprising the conventional logistic chain and innovative logistic chains corresponding to the industry market segments. It is proposed to use the customer value of the manufactured products as a criterion of the industrial enterprise’s logistic chains management efficiency. Implementation of the offered model of cooperation between the logistic chain participants is aimed at creation of a continuous innovations flow, reduction of technological development costs and uniting of the participants’ experience.

  18. Challenges to achievement of metal sustainability in our high-tech society.

    Izatt, Reed M; Izatt, Steven R; Bruening, Ronald L; Izatt, Neil E; Moyer, Bruce A

    2014-04-21

    Achievement of sustainability in metal life cycles from mining of virgin ore to consumer and industrial devices to end-of-life products requires greatly increased recycling rates and improved processing of metals using conventional and green chemistry technologies. Electronic and other high-tech products containing precious, toxic, and specialty metals usually have short lifetimes and low recycling rates. Products containing these metals generally are incinerated, discarded as waste in landfills, or dismantled in informal recycling using crude and environmentally irresponsible procedures. Low recycling rates of metals coupled with increasing demand for high-tech products containing them necessitate increased mining with attendant environmental, health, energy, water, and carbon-footprint consequences. In this tutorial review, challenges to achieving metal sustainability, including projected use of urban mining, in present high-tech society are presented; health, environmental, and economic incentives for various government, industry, and public stakeholders to improve metal sustainability are discussed; a case for technical improvements, including use of molecular recognition, in selective metal separation technology, especially for metal recovery from dilute feed stocks is given; and global consequences of continuing on the present path are examined.

  19. Global Business Networks and Cooperation within Supply Chain as a Strategy of High-Tech Companies’ Growth

    Milena Ratajczak-Mrozek

    2012-01-01

    Full Text Available Abstract The specificity of the operation profile of high-tech companies, including the necessity of operating at the international scale may account for the fact that these companies may find in network relationships, business networks and cooperation an essential determinant for growth and competitiveness. Foreign entities should be especially interesting business partners for high- tech companies, as they are often seen as representing more advanced knowledge, resources and experience. The aim of the article is to point out to global business networks (i.e. including both local and foreign entities, and especially to cooperation within supply chain, as an important basis for a growth strategy of a high-tech company. The article adopts assumptions of the network approach as a concept of companies cooperation. An analysis of the author’s own as well as secondary empirical research, with the focus on high- tech companies located in Poland is presented. In particular, the data from own research of 62 high-tech companies in Poland conducted in the first half of 2011 is analysed. It shows that the high-tech companies placing great importance on cooperation within supply chain demonstrate a higher growth and level of competitiveness than the companies which do not ascribe such importance (bearing in mind that supply chain forms an important part of a business network.

  20. Design of high performance mechatronics high-tech functionality by multidisciplinary system integration

    Munnig Schmidt, R; Rankers, A

    2014-01-01

    Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives.This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS.As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, this

  1. The design of high performance mechatronics high-tech functionality by multidisciplinary system integration

    Munnig Schmidt, R; van Eijk, J

    2011-01-01

    Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives. This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS. As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, thi

  2. Product Innovation in High-tech SMEs: A Case Study of Weili Electronics Co.,Ltd

    HE Zheng; LI Shi-ming

    2006-01-01

    Product innovation is an important strategy for high-tech firms, especially for small and medium enterprises. This paper proposes that the technological strategies for SMEs are dynamic and during different phase, there is different innovation strategy which leads to various market performances. In particular, through the case study of Weili Electronics Co., Ltd, we find that organizational learning abilities play a fundamental role in strategic decision. In addition, the frameworks for the determinants of technological strategies in three stages are established to illustrate the evolutionary processes of product innovation in Weili Electronics Co., Ltd.

  3. Agglomeration externalities, market structure and employment growth in high-tech industries: Revisiting the evidence

    Cieślik Andrzej

    2015-09-01

    Full Text Available In this paper we revisit the existing empirical evidence on the effects of various agglomeration externalities and the market structure on employment growth in the high-tech industries of the European Economic Area (EEA. Our study is based on the dynamic panel dataset of two-digit NACE rev 1.1. industries in 285 regions of the European Economic Area for the period 1995-2007. We find that employment growth is negatively related to competition, while localization and urbanization externalities do not seem to affect growth.

  4. A strategy to assist management in workforce engagement and employee retention in the high tech engineering environment.

    Kennedy, Elizabeth; Daim, Tugrul U

    2010-11-01

    Many companies use survey methods in an attempt to gauge employees' attitudes and opinions toward the company. These attitudes and opinions are directly related to an employee's engagement within the company. In many instances, employees wait in vain for the survey response and the subsequent employer actions, but the truth is sometimes management does not know what to do with the results. For this reason, we theorize that this type of survey, typically utilizing the Likert-scale, is not adequately assisting management in addressing employee engagement and retention issues. For instance, in many occasions, once the survey results are tabulated, companies are doing little or nothing to address the issues. In fact, far too many companies make the mistake of conducting employee engagement surveys, and then ignore the answers. Thus, we propose that a company should take advantage of the survey results, and utilize them to provide data to bridge employees' needs and goals with stakeholders' responsibilities and goals by refining and incorporating them into a hierarchical decision model (HDM). Thus, this would essentially be utilizing the quantitative data to determine what to measure qualitatively. We use a case from the high tech industry, specifically focusing on the engineering environment. Engineering environments are known to be more creative and such approaches would be more beneficial. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

  5. Determinants of the Price of High-Tech Metals: An Event Study

    Wanner, Markus, E-mail: markus.wanner@mrm.uni-augsburg.de; Gaugler, Tobias; Gleich, Benedikt; Rathgeber, Andreas [University of Augsburg, Institute for Materials Resource Management (Germany)

    2015-06-15

    The growing demand for high-tech products has resulted in strong growth in demand for certain minor metals. In combination with production concentrated in China, this caused strong and unpredicted price movements in recent years. As a result, manufacturing companies have to cope with additional risks. However, the detailed reasons for the price development are only partially understood. Therefore, we analyzed empirically which determinants can be assigned to price movements and performed an event study on the high-tech metals neodymium, indium, and gallium. Based on our dataset of news items, we were able to find coinciding events to almost 90% of all price jumps (recall). We showed that if any information about these events occurred with a probability of over 50% there would also be a price jump within 10 days (precision). However, the classical set of price determinants has to be extended for these specific markets, as we found unorthodox factors like holidays or weather that may be indicators for price movements. Therefore, we hope that our study supports industry for instance in performing more informed short-term planning of metals purchasing based on information about specific events.

  6. Integrative Laser Medicine and High-Tech Acupuncture at the Medical University of Graz, Austria, Europe

    Gerhard Litscher

    2012-01-01

    Full Text Available At the moment, modernization of acupuncture has a high priority. On the traditional side, acupuncture has only recently been awarded the status of Intangible Cultural Heritage by the UNESCO. On the innovative side, high-tech acupuncture is a registered trademark in Austria. Acupuncture has been used for medical treatment for thousands of years. A large number of empirical data are available but the technical quantification of effects was not possible up to now. Using electroacupuncture, needle, or laser stimulation and modern biomedical techniques, it was possible for the first time to quantify changes in biological activities caused by acupuncture. This paper which serves as introduction for the special issue “High-Tech Acupuncture and Integrative Laser Medicine” of the present journal, focuses on the latest innovative aspects that underline the further enhancement and development of acupuncture. Special emphasis is given to new methodological and technical investigations, for example, results obtained from all kinds of acupuncture innovations (e.g., teleacupuncture and integrative laser medicine.

  7. Determinants of the Price of High-Tech Metals: An Event Study

    Wanner, Markus; Gaugler, Tobias; Gleich, Benedikt; Rathgeber, Andreas

    2015-01-01

    The growing demand for high-tech products has resulted in strong growth in demand for certain minor metals. In combination with production concentrated in China, this caused strong and unpredicted price movements in recent years. As a result, manufacturing companies have to cope with additional risks. However, the detailed reasons for the price development are only partially understood. Therefore, we analyzed empirically which determinants can be assigned to price movements and performed an event study on the high-tech metals neodymium, indium, and gallium. Based on our dataset of news items, we were able to find coinciding events to almost 90% of all price jumps (recall). We showed that if any information about these events occurred with a probability of over 50% there would also be a price jump within 10 days (precision). However, the classical set of price determinants has to be extended for these specific markets, as we found unorthodox factors like holidays or weather that may be indicators for price movements. Therefore, we hope that our study supports industry for instance in performing more informed short-term planning of metals purchasing based on information about specific events

  8. Valuing carbon assets for high-tech with application to the wind energy industry

    Han, Liyan; Liu, Yang; Lin, Qiang; Huang, Gubo

    2015-01-01

    In contrast to the traditional methods for high-tech evaluation, we introduce a new, more active idea for considering the carbon asset effect, in addition to the economic and technological considerations for strategic significance. The method proposed in this paper considers a reduced amount of carbon emissions, less than that of the current industry baseline, to be an asset that is beneficial to a firm that adopts a new technology. The measured carbon asset values vary across different technologies, in different industries and over time. The new method is applied to the valuing of wind energy technology and uses the Weibull distribution to estimate the wind energy capacity and a concrete sensitivity analysis. These applications support the validity of the new method and show that the impact of the fluctuations of carbon sinks on the values of carbon assets is significantly greater than that of volatility in the production output. The paper also presents some policy recommendations based on the results. - Highlights: • Carbon asset dimension for high-tech evaluation. • Valuing wind energy technology by Weibull distribution. • Greater impact of the carbon sink price on the carbon asset value than that of production output. • The environmental risk could be measured based on the carbon asset assessment.

  9. Integrative Laser Medicine and High-Tech Acupuncture at the Medical University of Graz, Austria, Europe

    Litscher, Gerhard

    2012-01-01

    At the moment, modernization of acupuncture has a high priority. On the traditional side, acupuncture has only recently been awarded the status of Intangible Cultural Heritage by the UNESCO. On the innovative side, high-tech acupuncture is a registered trademark in Austria. Acupuncture has been used for medical treatment for thousands of years. A large number of empirical data are available but the technical quantification of effects was not possible up to now. Using electroacupuncture, needle, or laser stimulation and modern biomedical techniques, it was possible for the first time to quantify changes in biological activities caused by acupuncture. This paper which serves as introduction for the special issue “High-Tech Acupuncture and Integrative Laser Medicine” of the present journal, focuses on the latest innovative aspects that underline the further enhancement and development of acupuncture. Special emphasis is given to new methodological and technical investigations, for example, results obtained from all kinds of acupuncture innovations (e.g., teleacupuncture) and integrative laser medicine. PMID:22570669

  10. Applications of inorganic mass spectrometry in metal analysis of high-tech industry

    Ling Yongjian; Wang Shimin; Li Peiling; Chen Lizhen

    2007-01-01

    The metals in the nature are closely related to the progress of human culture and economic activities. Various kinds of metals are continuously being applied to new processes and products. During the effect by biogeochemical cycle, metals were released to environmental compartments, such as air, water, soil, and living organisms. The deficiency in knowledge, poor management, greedy, and bad intention usually leads to serious environmental pollution, eco-environment damage, and human poisoning. Effective analysis of metal concentrations and species during economic activities and eco-environment is an important research and survey subject. Internationally, the establishment of high-tech industrial park has become the major means to simultaneously improve living quality and broaden economic activity. High-tech industry uses metals. It is mandatory to control the distribution of metals in feed, process, product, waste, environment, and the life-cycle. This report is based on our experience with inorganic mass spectrometry focusing on the use of secondary ion mass spectrometry (SIMS) and inductively-coupled mass spectrometry (ICP-MS) in metal analysis of high-tech industrial parts. The report includes (1) The use of SIMS for analyzing impurity in depth and on surface demonstrates the importance of integrating trace metal, depth profile, micro-area, and surface analyses. (2) Survey ambient heavy metals (As, Be, Cd, Dr, Hg, Mn, Ni and Pb) around industrial parks and compare the findings to stack heavy metals. The results demonstrate that ICP-MS is indispensable to help reveal heavy metal distribution in industrial park ambient air and clarify suspected polluting sources. (3) Research and develop analytical method to determine metal impurities (Na, K, Mg, Ca, Cu, Fe, Mn, Li and Al) in photoresist. The method uses a novel nitric acid digestion technique to convert photoresist into carbon dioxide and water, followed by ICP-MS analysis of high-purity nitric acid recovery

  11. The Effects of Partnership Management on Supply Chain Cooperative Performance: A Case Study of High-Tech Industry

    Wu, Mei-Ying; Chang, Yun-Ju; Weng, Yung-Chien

    2009-08-01

    With the structural change of global supply chains, the relationship between manufacturers and suppliers has transformed into a long-term partnership. Thus, this study aims to explore the partnership between manufacturers and suppliers in Taiwan's high-tech industry. Four constructs, including partner characteristic, partnership quality, partnership closeness, and cooperative performance, induced from previous literatures are used to construct the research framework and hypotheses. A questionnaire survey is then performed on executives and staffs involved in the high-tech industry. The proposed framework and hypotheses are empirically validated through confirmatory factory analysis and structural equation modeling. It is expected that the research findings can serve as a reference for Taiwan's high-tech industry on building partnerships.

  12. Issues of integrating high-tech concepts into nuclear power plant operation

    Kisner, R.A.; Carter, R.J.; Lindsay, R.W.

    1990-01-01

    The stockpile of new ideas continues to grow for monitoring nuclear power plant parameters, characteristics, and vital signs and for controlling systems, subsystems, and components. This wide selection of monitoring and control software increases the difficulty of designing an integrated control room. As plant control room operators increase their reliance on computerized systems, including real-time plant data and data base systems, the integration of monitoring, diagnostics, and control software into uniform and seamless environment becomes imperative. A systematic approach to evaluating the usefulness of such high-tech control concepts is needed. This paper concentrates on methods to evaluate control concepts by assessing factors that determine a system's potential effectiveness within the context of the overall environment, including both human and machine components. Although not an in-depth study, this paper serves to outline several measures of utility. 21 refs., 3 figs., 2 tabs

  13. Creating Value for Customer in Business Networks of High-Tech Goods Manufacturers

    Joanna Wiechoczek

    2016-01-01

    Full Text Available The main paper goal is to recognize the category of value for customer with respect to high-tech products, and to propose a model of creation of this value in business networks established by manufacturers. The research methods include critical analysis of the literature, documentation method, as well as the case research method and observation method. The results of the research proved that the value offered to buyers is characterized by growing multidimensionality which results in increasing complexity of the creation process of this value by their manufacturers. Due to the fact that they do not have complex skills and resources to create the value independently, they form business networks. These networks include increasingly larger group of entities, in which the importance of individual cooperants is highly diversified.

  14. Forming system of strategic innovation management at high-tech engineering enterprises

    Ergunova, O. T.; Lizunkov, V. G.; Malushko, E. Yu; Marchuk, V. I.; Ignatenko, A. Yu

    2017-02-01

    The article considers the processes of forming the strategic system of innovative activity management at the enterprises of a high-tech mechanical engineering complex (MEC) that are traditionally decisive in shaping the economic base of Russia. The authors proposed a method of designing a strategic system of innovative activity management at the MEC’s enterprises of the region which is based on the consideration of means and opportunities of the enterprise to implement intellectual activity. The proposed methodology and the empirical results constituted a ground for developing a system of strategic innovation management when performing the state-guaranteed order at the hi-tech MEC enterprises. Its implementation will help to reduce the level of uncertainty throughout the entire life cycle of an innovative activity product.

  15. Exploration of Organizing in Chinese High-Tech Companies Located in Denmark

    Westenholz, Ann

    Purpose: Very little research has been done to find out what happens to organizing in Chinese companies that are located in countries characterized by cooperative capitalism. I focus on this phenomenon and explore what happens to organizing in two Chinese high-tech companies located in Denmark....... Design/methodology/approach: Case studies, interviewing, and three questions inspired by the work of Boltanski & Thévenot: 1) What type of test scenarios are the Chinese and Danes becoming engaged in? 2) Which worlds are called upon as justification of actions by the Chinese and Danes in the test...... have enacted an industrial world and a civic world. Furthermore, it is suggested that controversies also occur when Chinese managers enact a fuzzy world. Different worlds collide in these types of test scenarios, creating ambiguity about the worth of the persons involved and the organizing principles...

  16. Internationalisation of high-tech start-ups and fast growth-evidence for UK and Germany

    Bürgel, Oliver; Fier, Andreas; Licht, Georg; Murray, Gordon

    2000-01-01

    For firms acting in technological niches the expansion into foreign markets can be a way to increase sales and to thus to recover initial sunk costs over a shorter time frame. Our research, based on survey data for nearly 600 British and German high-tech start-ups, examines whether internationalisation leads to faster growth among high-tech start-ups. Results show that firms with international sales have higher sales growth than firms that sell only domestically. We find that technological so...

  17. Vitamin D Status and Quality of Life in Healthy Male High-Tech Employees

    Sigal Tepper

    2016-06-01

    Full Text Available While low vitamin D status has been shown to be associated with decreased quality of life in unhealthy populations and women, only limited data are available regarding healthy adult men. Our aim was to evaluate the associations between health-related quality of life (QoL and vitamin D status in adult men. High-tech employees aged 25–65 year were recruited from an occupational periodic examination clinic at Rambam Health Campus. QoL was assessed using the Centers for Disease Control and Prevention (CDC Health-related quality of life questionnaire (HRQOL-4. Serum 25-hydroxyvitamin D (25(OHD and Body Mass Index (BMI were measured; further information was collected about physical activity, education, sun exposure, sick-days, and musculoskeletal pain severity (visual analog scale. Three hundred and fifty-eight men were enrolled in the study; mean serum 25(OHD level was 22.1 ± 7.9 ng/mL (range 4.6–54.5 ng/mL. In a multivariate logistic regression model, 25(OHD was a significant independent determinant of self-rated health; Odds Ratio (OR for self-rated health was 0.91 (95% confidence interval (CI 0.85–0.97, p = 0.004, adjusted for age, BMI, pain severity, physical activity, and sun exposure. Every 1 ng/mL increase of 25(OHD was associated with 9% reduction in the odds of reporting self-rated health as fair or poor. Poisson regression model demonstrated an association between physically unhealthy days and 25(OHD levels (rate ratio 0.95, p < 0.001. In conclusion, serum levels of 25(OHD were associated with self-rated health and with physically unhealthy days of HRQOL in healthy high-tech male workers. Future intervention studies are required to test the impact of vitamin D supplementation on QoL.

  18. Vitamin D Status and Quality of Life in Healthy Male High-Tech Employees.

    Tepper, Sigal; Dabush, Yael; Shahar, Danit R; Endevelt, Ronit; Geva, Diklah; Ish-Shalom, Sofia

    2016-06-15

    While low vitamin D status has been shown to be associated with decreased quality of life in unhealthy populations and women, only limited data are available regarding healthy adult men. Our aim was to evaluate the associations between health-related quality of life (QoL) and vitamin D status in adult men. High-tech employees aged 25-65 year were recruited from an occupational periodic examination clinic at Rambam Health Campus. QoL was assessed using the Centers for Disease Control and Prevention (CDC) Health-related quality of life questionnaire (HRQOL-4). Serum 25-hydroxyvitamin D (25(OH)D) and Body Mass Index (BMI) were measured; further information was collected about physical activity, education, sun exposure, sick-days, and musculoskeletal pain severity (visual analog scale). Three hundred and fifty-eight men were enrolled in the study; mean serum 25(OH)D level was 22.1 ± 7.9 ng/mL (range 4.6-54.5 ng/mL). In a multivariate logistic regression model, 25(OH)D was a significant independent determinant of self-rated health; Odds Ratio (OR) for self-rated health was 0.91 (95% confidence interval (CI) 0.85-0.97, p = 0.004), adjusted for age, BMI, pain severity, physical activity, and sun exposure. Every 1 ng/mL increase of 25(OH)D was associated with 9% reduction in the odds of reporting self-rated health as fair or poor. Poisson regression model demonstrated an association between physically unhealthy days and 25(OH)D levels (rate ratio 0.95, p health and with physically unhealthy days of HRQOL in healthy high-tech male workers. Future intervention studies are required to test the impact of vitamin D supplementation on QoL.

  19. OPERATION OF NEW AND HIGH-TECH DEVELOPMENT ZONE – “CHINA-SINGAPORE SUZHOU INDUSTRIAL PARK”

    Qi Ji.

    2017-01-01

    Full Text Available Systematic work of the higher authorities of China on achievement and implementation of generally valid aims in the field of science and technology allowed the People’s Republic of China to reach intense innovative advancement of its conomy. New and High-Tech Development Zones form the basis of the national innovative infrastructure in China, the most successful of which is China-Singapore Suzhou Industrial Park (hereinafter – the Park. The Park can be characterized as a flagship project of cooperation between the governments of China and Singapore, pilot zone of reforms and innovations, successful model of international cooperation. The aim of the foundation and development of the Park is creation of innovative world class productions and setting up new international district with modern information and technology infrastructure and environmentally-friendly neighborhood. The article presents the process of formation of the Park’s management system and its interaction with the public authorities as well as the main principles of its organizational structure. Current social-economic development results and advancement of favorable conditions for investors are analyzed. Special emphasis is given to the concept of development of the industrial ecology observed by the Park’s management. The examples of intensive growth of infrastructure are given: creation of demonstration zones and experimental areas, building of social facilities. The emphasis is given to the constant development of the Park’s human resources. The project represents a new model of international economic and technical cooperation of China with other nations. 

  20. Travail, transparency and trust : a case study of computer-supported collaborative supply chain planning in high-tech electronics

    Akkermans, H.A.; Bogerd, P.; van Doremalen, J.B.M.

    2004-01-01

    Describes a case study of supply chain collaboration facilitated by a decision support environment in a high-tech electronics supply chain with multiple independent companies. In a business process called collaborative planning, representatives from these companies jointly take decisions regarding

  1. CAD/CAM Helps Build Better Bots: High-Tech Design and Manufacture Draws Engineering-Oriented Students

    Van Name, Barry

    2012-01-01

    There is a battlefield where no quarter is given, no mercy shown, but not a single drop of blood is spilled. It is an arena that witnesses the bringing together of high-tech design and manufacture with the outpouring of brute force, under the remotely accessed command of some of today's brightest students. This is the world of battling robots, or…

  2. Understanding cross-national trends in high-tech renewable power equipment exports to the United States

    Sawhney, Aparna; Kahn, Matthew E.

    2012-01-01

    We track US imports of advanced technology wind and solar power-generation equipment from a panel of countries during 1989–2010, and examine the determining factors including country size, sector-specific US FDI outflow, and domestic wind and solar power generation. Differentiating between the core high-tech and the balance of system equipment, we find US imports of both categories have grown at significantly higher rate from the relatively poorer countries, and particularly China and India. Larger countries are found to be exporting significantly more, and US FDI is found to play a significant positive role in the exports of high-tech equipment for the poor countries. For the core wind and solar high-tech equipment, we find domestic renewable power generation of the exporting countries also played a significant positive role. - Highlights: ► We track US imports of advanced technology wind and solar power-generation equipment. ► US imports of both categories have grown at significantly higher rate from China and India. ► US FDI is found to play a significant positive role in the exports of high-tech equipment.

  3. Current developments of high-tech robotic and mechatronic systems in horticulture and challenges for the future

    Pekkeriet, E.J.; Henten, van E.J.

    2011-01-01

    This paper reviews the current developments of high-tech robotic and mechatronic systems in horticulture and future perspectives. Driving forces for mechanization are identified. Dutch greenhouse crop production is used as an example. In greenhouse horticulture the production steps and control that

  4. A Study of the Influence of Learning Organization on Organizational Creativity and Organizational Communication in High Tech Technology

    Duan, Qingying

    2017-01-01

    The value of a high-tech industry no longer lies in the number of plants, equipment, and products but the intellectual property, customer confidence, capability of collaborating with business partners, telecommunication infrastructure, and the creativity potential and skills of its employees. This study is motivated by investigating the way of…

  5. Impacts of Academic R&D on High-Tech Manufacturing Products: Tentative Evidence from Supercomputer Data

    Le, Thanh; Tang, Kam Ki

    2015-01-01

    This paper empirically examines the impact of academic research on high-tech manufacturing growth of 28 Organisation for Economic Co-operation and Development (OECD) and emerging countries over the 1991-2005 period. A standard research and development (R&D) expenditure based measure is found to be too general to capture the input in high-tech…

  6. Functional criteria for emergency response facilities. Technical report (final)

    1981-02-01

    This report describes the facilities and systems to be used by nuclear power plant licensees to improve responses to emergency situations. The facilities include the Technical Support Center (TSC), Onsite Operational Support Center (OSC), and Nearsite Emergency Operations Facility (EOF), as well as a brief discussion of the emergency response function of the control room. The data systems described are the Safety Parameter Display System (SPDS) and Nuclear Data Link (NDL). Together, these facilities and systems make up the total Emergency Response Facilities (ERFs). Licensees should follow the guidance provided both in this report and in NUREG-0654 (FEMA-REP-1), Revision 1, for design and implementation of the ERFs

  7. Sites Requiring Facility Response Plans, Geographic NAD83, EPA (2006) [facility_response_plan_sites_la_EPA_2007

    Louisiana Geographic Information Center — Locations of facilities in Louisiana requiring Oil Pollution Act (OPA) Facility Response Plans (FRP). The dataset was provided by the Region 6 OSCARS program....

  8. Spatial Planning and High-tech Development : A comparative study of Eindhoven city-region, the Netherlands and Hsinchu City-region, Taiwan

    Huang, W.J.

    2013-01-01

    High-tech development—which lies at the very heart of the processes of economic growth—has been recognised by many developed and developing countries as a strategic instrument to enhance and sustain their competitiveness in the global economic network. Although the concept of high-tech development

  9. PREFACE: 12th High-Tech Plasma Processes Conference (HTPP-12)

    Gleizes, Alain; Ghedini, Emanuele; Gherardi, Matteo; Sanibondi, Paolo; Dilecce, Giorgio

    2012-12-01

    The High-Tech Plasma Processes - 12th European Plasma Conference (HTPP-12) was held in Bologna (Italy) on 24-29 June 2012. The conference series started in 1990 as a thermal plasma conference and gradually expanded to include other topic fields as well. Now the High-Tech Plasma Processes - European Plasma Conference (HTPP) is a bi-annual international conference based in Europe with topics encompassing the whole area of plasma processing science. The aim of the conference is to bring different scientific communities together, facilitate the contacts between science, technology and industry and provide a platform for the exploration of both fundamental topics and new applications of plasmas. Thanks to the efforts of the conference chairman, Professor Vittorio Colombo and of the co-chair, Professor Piero Favia, a well balanced participation from both the communities of thermal and nonthermal plasma researchers was achieved; this resulted in just about 196 attendees from 39 countries, with 8 plenary and 15 invited talks, plus 50 oral and 140 poster contributions. This volume of Journal of Physics: Conference Series gathers papers from regular contributions of HTPP-12; each contribution submitted for publication has been peer reviewed and the Editors are very grateful to the referees for their careful support in improving the original manuscripts. In the end, 39 manuscripts were accepted for publication, covering different topics of plasma processing science: from plasma fundamentals and modelling to source design and process diagnostics, from nanomaterial synthesis to surface modification, from waste treatment to plasma applications in a liquid environment. It is an honour to present this volume of Journal of Physics: Conference Series and we deeply thank the authors for their enthusiastic and high-grade contribution. Finally, we would like to thank the conference chairmen, the members of the steering committee, the international scientific committee, the local

  10. PREFACE: 13th High-Tech Plasma Processes Conference (HTPP-2014)

    2014-11-01

    The High-Tech Plasma Processes - 13th European Plasma Conference (HTPP-2014) was held in Toulouse (France) on 22-27 June 2014. The conference series started in 1990 as a thermal plasma conference and has gradually expanded to include other related topics. Now the High-Tech Plasma Processes - European Plasma Conference (HTPP) is an international conference organised in Europe every two years with topics encompassing the whole field of plasma processing science. The aim of the conference is to bring different scientific communities together, to facilitate contacts between science, technology and industry and to provide a platform for the exploration of both the fundamental topics and new applications of plasmas. For this edition of HTPP, as was the case for the last, we have acheived a well balanced participation from the communities of both thermal and non-thermal plasma researchers. 142 people from 17 countries attended the conference with the total number of contributions being 155, consisting of 8 plenary and 8 invited talks plus 51 oral and 88 poster contributions. We have received numerous papers corresponding to the contributions of HTPP-2014 that have been submitted for publication in this volume of Journal of Physics: Conference Series. Each submitted contribution has been peer reviewed (60 referees with at least two reviewing each paper) and the Editors are very grateful to the referees for their careful support in improving the original manuscripts. In total, 52 manuscripts have been accepted for publication covering a range of topics of plasma processing science from plasma fundamentals to process applications through to experiments, diagnostics and modelling. We have grouped the papers into the following 5 topics: - Arc-Materials Interaction and Metallurgy - Plasma Torches and Spraying - Synthesis of Powders and Nanomaterials - Deposition and Surface Treatment - Non-Equilibrium Plasmas We deeply thank the authors for their enthusiastic and high

  11. New horizons with PET/CT in high-tech radiotherapy planning

    Hadjieva, T.

    2009-01-01

    Full text:The precise delineation of exposed volumes in the high-tech radiotherapy is a major problem. The malignoma imaging was revolutionized by PET. PET became one of the routine imaging methods in developed countries in Europe and USA. PET with 18-FDG, combined with structural and topographic representation of images by CT, currently provides the most reliable information about the location and spread of tumor. Three dimensional radiotherapy planning is a challenge in today's practice and requires the most accurate visualization of the tumor, with its functional characteristics (proliferation activity, hypoxic cells, apoptosis, neoangiogenesis) and surrounding radiosensitive normal tissue and organs. The collected information about the main indications for radiotherapy planning using PET / CT in head and neck cancers , small cell lung carcinoma and some malignant lymphomas has been discussed. The problem of false positive and false negative findings has been also considered. The protocol for 18-FDG PET / CT conducting according to the agreed consensus of the IAEA expert meeting held in 2006 is presented

  12. MYRRHA a multi-purpose hybrid research reactor for high-tech applications

    Abderrahim, H. A.; Baeten, P.

    2012-01-01

    MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) is the flexible experimental accelerator driven system (ADS) in development at SCK-CEN. MYRRHA is able to work both in subcritical (ADS) as in critical mode. In this way, MYRRHA will allow fuel developments for innovative reactor systems, material developments for generation IV (GEN IV) systems, material developments for fusion reactors, radioisotope production and industrial applications, such as Si-doping. MYRRHA will also demonstrate the ADS full concept by coupling the three components (accelerator, spallation target and subcritical reactor) at reasonable power level to allow operation feedback, scalable to an industrial demonstrator and allow the study of efficient transmutation of high-level nuclear waste. MYRRHA is based on the heavy liquid metal technology and so it will contribute to the development of lead fast reactor (LFR) technology and in critical mode, MYRRHA will play the role of European technology pilot plant in the roadmap for LFR. In this paper the historical evolution of MYRRHA and the rationale behind the design choices is presented and the latest configuration of the reactor core and primary system is described. (authors)

  13. An Augmented Common Weight Data Envelopment Analysis for Material Selection in High-tech Industries

    Iman Shokr

    2016-08-01

    Full Text Available Material selection is a challenging issue in manufacturing processes while the inappropriate selected material may lead to fail the manufacturing process or end user experience especially in high-tech industries such as aircraft and shipping. Every material has different quantitative and qualitative criteria which should be considered simultaneously when assessing and selecting the right material. A weighted linear optimization method (WLOM in the class of data envelopment analysis which exists in literature is adopted to address material selection problem while accounting for both qualitative and quantitative criteria. However, it is demonstrated the adopted WLOM method is not able to produce a full ranking vector for the material selection problems borrowed from the literature. Thus, an augmented common weight data envelopment analysis model (ACWDEA is developed in this paper with the aim of eliminating deficiencies of WLOM model. The proposed ACWDEA is able to produce full ranking vector in decision making problems with less computational complexities in superior to the WLOM. Two material selection problems are solved and results are compared with WLOM and previous methods. Finally, the robustness and effectiveness of the proposed ACWDEA method are evaluated through Spearman’s correlation tests.

  14. An Integrated Model for Supplier Selection for a High-Tech Manufacturer

    Lee, Amy H. I.; Kang, He-Yau; Lin, Chun-Yu

    2011-11-01

    Global competitiveness has become the biggest concern of manufacturing companies, especially in high-tech industries. Improving competitive edges in an environment with rapidly changing technological innovations and dynamic customer needs is essential for a firm to survive and to acquire a decent profit. Thus, the introduction of successful new products is a source of new sales and profits and is a necessity in the intense competitive international market. After a product is developed, a firm needs the cooperation of upstream suppliers to provide satisfactory components and parts for manufacturing final products. Therefore, the selection of suitable suppliers has also become a very important decision. In this study, an analytical approach is proposed to select the most appropriate critical-part suppliers in order to maintain a high reliability of the supply chain. A fuzzy analytic network process (FANP) model, which incorporates the benefits, opportunities, costs and risks (BOCR) concept, is constructed to evaluate various aspects of suppliers. The proposed model is adopted in a TFT-LCD manufacturer in Taiwan in evaluating the expected performance of suppliers with respect to each important factor, and an overall ranking of the suppliers can be generated as a result.

  15. Ecological network analysis for a low-carbon and high-tech industrial park.

    Lu, Yi; Su, Meirong; Liu, Gengyuan; Chen, Bin; Zhou, Shiyi; Jiang, Meiming

    2012-01-01

    Industrial sector is one of the indispensable contributors in global warming. Even if the occurrence of ecoindustrial parks (EIPs) seems to be a good improvement in saving ecological crises, there is still a lack of definitional clarity and in-depth researches on low-carbon industrial parks. In order to reveal the processes of carbon metabolism in a low-carbon high-tech industrial park, we selected Beijing Development Area (BDA) International Business Park in Beijing, China as case study, establishing a seven-compartment- model low-carbon metabolic network based on the methodology of Ecological Network Analysis (ENA). Integrating the Network Utility Analysis (NUA), Network Control Analysis (NCA), and system-wide indicators, we compartmentalized system sectors into ecological structure and analyzed dependence and control degree based on carbon metabolism. The results suggest that indirect flows reveal more mutuality and exploitation relation between system compartments and they are prone to positive sides for the stability of the whole system. The ecological structure develops well as an approximate pyramidal structure, and the carbon metabolism of BDA proves self-mutualistic and sustainable. Construction and waste management were found to be two active sectors impacting carbon metabolism, which was mainly regulated by internal and external environment.

  16. Continuous Innovation and Business Development in High-tech SME Clusters: A Change Point Analysis and Assessment Approach

    Müller, Sabine; Neergaard, Helle; Ulhøi, John Parm

    The aim of this paper is to  propose an integrated methodological approach to study  complex  and  longitudinal  processes  such  as  continuous  innovation  and business development in high-tech SME clusters. It draws from four existing and  well-recognised approaches for studying events...... is especially helpful for studies which focus on continuous innovation and  business development in high-tech SME clusters as these  studies  could  benefit  tremendously  from  more qualitative  approaches, which  facilitate  in-depth  understanding  continuous  and  changing  processes. Therefore, major...

  17. Displacement in new economy labor markets: Post-displacement wage loss in high tech versus low tech cities.

    Davis, Daniel J; Rubin, Beth A

    2016-11-01

    While scholars and politicians tout education as the salve to employment disruptions, we argue that the geography of the new economy, and the social closure mechanisms that geography creates, may be just as important as individuals' characteristics for predicting post-displacement wage loss (or gain). We use data from the 2012 Displaced Workers ement of the Current Population Survey and from the 2010 United States Census to test hypotheses linking local labor markets in different industrial contexts to post-displacement wage loss. Our results point to age as a closure mechanism, and to the partially protective effect of education in high-tech versus low-tech economic sectors. This study is the first to use national level data to examine how employment in high-tech cities influences post-displacement wages. These findings are relevant both for theorizing about the new economy and for public policy. Copyright © 2016 Elsevier Inc. All rights reserved.

  18. The impact of the degree of application of e-commerce on operational performance among Taiwans high-tech manufacturers

    Yi-Chan Chung

    2013-11-01

    Full Text Available This study probes the correlation of types of operational strategy, degrees of organisational learning, types of organisational culture, the degree of the application of e-commerce, and operational performance among high-tech firms in Taiwan. The data was collected by questionnaires distributed via mail to senior supervisors at high-tech firms in six industries at three Taiwanese science parks. The results showed that a higher degree of e-commerce application leads to a significant and positive effect on operational performance. This study suggests that, in order to upgrade operational performance, firms should enhance their organisational learning and e-commerce, along with their rational, hierarchical, consensual, and developmental cultures, and the execution of prospector and defender strategies.

  19. Congestion Service Facilities Location Problem with Promise of Response Time

    Dandan Hu

    2013-01-01

    Full Text Available In many services, promise of specific response time is advertised as a commitment by the service providers for the customer satisfaction. Congestion on service facilities could delay the delivery of the services and hurts the overall satisfaction. In this paper, congestion service facilities location problem with promise of response time is studied, and a mixed integer nonlinear programming model is presented with budget constrained. The facilities are modeled as M/M/c queues. The decision variables of the model are the locations of the service facilities and the number of servers at each facility. The objective function is to maximize the demands served within specific response time promised by the service provider. To solve this problem, we propose an algorithm that combines greedy and genetic algorithms. In order to verify the proposed algorithm, a lot of computational experiments are tested. And the results demonstrate that response time has a significant impact on location decision.

  20. Sectorial and regional determinants of firm dynamics in developing countries: evidence for low, medium and high tech manufacturing in Argentina

    Calá, Carla Daniela

    2018-01-01

    We analyse the determinants of firm dynamics in developing countries using Argentina as an illustrative case. We explain firm entry and exit at the regional level, distinguishing three groups of manufacturing activities: low, medium and high tech. We find that both region -and sector- specific determinants explain firm dynamics, but the impact is not homogeneous across sectors. In particular, for low tech industries, there is a need for explanatory variables that proxy for the specificities o...

  1. Cookbooks, High-tech Kitchens and Gender Culture: addressing the sugar and spice in the contemporary couple relations

    Costa, Rosalina

    2013-01-01

    This text focuses on the cookbook and related “mundane practices” (Martens) within the context of the appropriation of high-tech equipment in the kitchen to discuss the power of the socialisation of gender. Our argument is that cookbooks can be a way to dissipate the old difficulties that men, particularly, face in the kitchen; and at the same time, their use (and misuse) reinforces the persistence of some gaps due to previous and unequal socialisation regarding cookery as a skill.

  2. OUTLAY FOR COMMERCIALIZATION OF HIGH-TECH PRODUCTS IN THE CONTEXT OF MARKETING MODELS OF INNOVATION DIFFUSION

    O. Zhylinska; S. Firsova

    2015-01-01

    The necessity of identifying the costs for commercialization of high-tech products is revealed based on theoretical assumptions of marketing models of innovation diffusion. The results obtained show the objective nature of the avalanche increase of transaction costs choice, caused by a high level of information asymmetry, which occurs in gaps in lifecycle of high technology products adoption. A development and systematization of marketing measures to bridge the gap in life cycle of high techn...

  3. The Consequences of Commercialization Choices for New Entrants in High-Tech Industries: A Venture Emergence Perspective

    Giones, Ferran; Gurses, Kerem

    for these different markets. We test our hypotheses on longitudinal dataset of 453 new firms started in 2004 in different high-tech industries in the US. We find that that technology and human capital resources favor the adoption of alternative commercialization strategies; nevertheless, we do not observe significant...... differences in the venture emergence or survival likelihood. Our findings offer a closer view of the venture emergence process of new firms, clarifying the causes and consequences of the technology commercialization choices....

  4. Business Intelligence from User Generated Content: Online Opinion Formation in Purchasing Decisions in High-Tech Markets

    Setiya , Karan; Ubacht , Jolien; Cunningham , Scott; Oruç , Sertaç

    2016-01-01

    Part 6: Data Acquisition, Management and Analytics; International audience; User Generated Content (UGC) requires new business intelligence methods to understand the influence of online opinion formation on customer purchasing decisions. We developed a conceptual model for deriving business intelligence from tweets, based on the Classical Model of Consensus Formation and the Theory of Planned Behaviour. We applied the model to the dynamic high-tech smartphone market by means of three case stu...

  5. Manufacturing Growth with Social Deficits. Environmental and Labour Issues in the High Tech Industry of Penang, Malaysia

    Wangel, Arne

    2001-01-01

    The economic downturn in 1997 was less severe in Malaysia compared to other countries in the region. However, as the manufacturing sector, in particular the high tech industries, lacks a strong national technological base and depends on exports, structural problems remain. The first part of the p......The economic downturn in 1997 was less severe in Malaysia compared to other countries in the region. However, as the manufacturing sector, in particular the high tech industries, lacks a strong national technological base and depends on exports, structural problems remain. The first part...... of the paper briefly provides key indicators of the economic recession. The second part describes the origin and structure of the high tech sector in Malaysia. Impressive growth has been achieved only as accompanied by a deepening dependency on trends in the global computer industry. The absence of innovative...... capacity makes it difficult to escape production segments, in which labour cost remains a key parameter. Thus, the competitive position of Malaysia is unstable and may erode. In the third part, the pattern of interests of the major stakeholders: authorities, corporate managers, workers, trade unions...

  6. The Risk Evaluation of Agricultural High-tech Investment Project%农业高新技术投资项目风险评价

    陆迁; 苗姗姗

    2005-01-01

    The agricultural high-tech investment project (AHIP) is characterized by technology-intensive, high risk and great profit. This article analyzes essential factors of the risks of the agricultural high-tech investment projects and the traditional risk evaluation method of agricultural projects. We think that the applications of the sensitivity analysis and probability are defective. Therefore, this article introduces a structural model to evaluate the risks of the agricultural high-tech investment projects and the system of the concrete evaluation indexes.

  7. A model of sustainable development of scientific research health institutions, providing high-tech medical care

    I. Yu. Bedoreva

    2017-01-01

    Full Text Available The issue of sustainability is relevant for all types of businesses and organizations. Long-term development has always been and remains one of the most difficult tasks faced by organizations. The implementation the provisions of international standards ISO series 9000 has proven to be effective. The ISO standards are concentrated on the global experience for sustainable success of organizations. The standards incorporated all the rational that has been accumulated in this field of knowledge and practice. These standards not only eliminate technical barriers in collaboration and have established standardized approaches, but also serve as a valuable source of international experience and ready management solutions. They became a practical guide for the creation of management systems for sustainable development in organizations of different spheres of activity.Problem and purpose. The article presents the author’s approach to the problem of sustainable development health of the organization. The purpose of this article is to examine the approaches to management for sustainable success of organizations and to describe a model of sustainable development applied in research healthcare institutions providing high-tech medical care.Methodology. The study used general scientific methods of empirical and theoretical knowledge, general logical methods and techniques and methods of system analysis, comparison, analogy, generalization, the materials research for the development of medical organizations.The main results of our work are to first develop the technique of complex estimation of activity of the scientific-research institutions of health and deploy key elements of the management system that allows the level of maturity of the management system of the institution to be set in order to identify its strengths and weaknesses, and to identify areas for improvements and innovation, and to set priorities for determining the sequence of action when

  8. Evolutions and Trends in the International Trade with High-Tech Products

    Ecaterina Stănculescu

    2009-07-01

    Full Text Available One of the ways for accessing knowledge and, through it, for competitivity on international level, is the world trade with high-tech (HT products. European Union and its Member States (Romania inclusive position on international HT market defines in fact their competitivity in the global economy. Many politics for encourage innovation in a country lead also to stimulate the technological transfer out of that country. Politics that reduce trade barriers and uncertainties in international trade relations have the potential to increase the international technology transfer. The weight of HT products and services in the entire world trade is around of 19-20%, this percentage varying in different studies and statistics due to the products groups considered to be part of this category and to the inclusion of some adjacent services. During 2001-2008, the world HT export value increased in average by 7% per year. The growth rates were fairly high, by one hand, because of the rising of exported/imported products complexity (and of advanced technologies, and by the other hand, due to the evolution of global demand and offer, that influence the prices of these products. The Popular Republic of China was the country that influenced mostly the increase of international trade with HT products. Four economies – China, United States, EU – 27 and Japan – totalize over one half of the world HT exports. USA and EU registered also the most important commercial deficits in the world in this field until 2008. In 2008, USA deficit turns into commercial surplus in HT area because of the decrease of imports following the crisis. As for Romania, the weight of HT products exports and imports in the whole country’s trade differs from about 4%, in exports case, to about 9-10%, in that of imports. Commercial balance in this field was always in the red. During 2001-2008, the greatest weights in the world trade with HT products have had, in order, the groups

  9. Decision Making In A High-Tech World: Automation Bias and Countermeasures

    Mosier, Kathleen L.; Skitka, Linda J.; Burdick, Mark R.; Heers, Susan T.; Rosekind, Mark R. (Technical Monitor)

    1996-01-01

    Automated decision aids and decision support systems have become essential tools in many high-tech environments. In aviation, for example, flight management systems computers not only fly the aircraft, but also calculate fuel efficient paths, detect and diagnose system malfunctions and abnormalities, and recommend or carry out decisions. Air Traffic Controllers will soon be utilizing decision support tools to help them predict and detect potential conflicts and to generate clearances. Other fields as disparate as nuclear power plants and medical diagnostics are similarly becoming more and more automated. Ideally, the combination of human decision maker and automated decision aid should result in a high-performing team, maximizing the advantages of additional cognitive and observational power in the decision-making process. In reality, however, the presence of these aids often short-circuits the way that even very experienced decision makers have traditionally handled tasks and made decisions, and introduces opportunities for new decision heuristics and biases. Results of recent research investigating the use of automated aids have indicated the presence of automation bias, that is, errors made when decision makers rely on automated cues as a heuristic replacement for vigilant information seeking and processing. Automation commission errors, i.e., errors made when decision makers inappropriately follow an automated directive, or automation omission errors, i.e., errors made when humans fail to take action or notice a problem because an automated aid fails to inform them, can result from this tendency. Evidence of the tendency to make automation-related omission and commission errors has been found in pilot self reports, in studies using pilots in flight simulations, and in non-flight decision making contexts with student samples. Considerable research has found that increasing social accountability can successfully ameliorate a broad array of cognitive biases and

  10. Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices.

    Sezdi, Mana

    2016-01-01

    A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older technology devices and predictive maintenance for newer high-tech devices. For preventive maintenance development, 589 older technology devices were subjected to performance verification and safety testing (PVST). For predictive maintenance development, the manufacturers' recommendations were used for 134 high-tech devices. These strategies were evaluated in terms of device reliability. This study recommends the use of two different maintenance strategies for old and new devices at hospitals in developing countries. Thus, older technology devices that applied only corrective maintenance will be included in maintenance like high-tech devices.

  11. Studying open innovation collaboration between the high-tech industry and science with linguistic ethnography : Battling over the status of knowledge in a setting of distrust

    De Maeijer, E.D.R.; Van Hout, T.; Weggeman, M.C.D.P.; Post, G.

    2016-01-01

    Open Innovation collaborations often pit academia against industry. Such inter-organizational collaborations can be troublesome due to different organizational backgrounds. This paper investigates what kind of knowledge a multinational high tech company and a research institute share with each

  12. Environmental Assessment for the NASA First Response Facility

    Kennedy, Carolyn

    2003-01-01

    NASA intends to construct a First Response Facility for integrated emergency response and health management. This facility will consolidate the Stennis Space Center fire department, medical clinic, security operations, emergency operations and the energy management and control center. The alternative considered is the "No Action Alternative". The proposed action will correct existing operational weaknesses and enhance capabilities to respond to medical emergencies and mitigate any other possible threats. Environmental impacts include are emissions, wetlands disturbance, solid waste generation, and storm water control.

  13. Opportunities for Automated Demand Response in California Wastewater Treatment Facilities

    Aghajanzadeh, Arian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wray, Craig [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McKane, Aimee [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-08-30

    Previous research over a period of six years has identified wastewater treatment facilities as good candidates for demand response (DR), automated demand response (Auto-­DR), and Energy Efficiency (EE) measures. This report summarizes that work, including the characteristics of wastewater treatment facilities, the nature of the wastewater stream, energy used and demand, as well as details of the wastewater treatment process. It also discusses control systems and automated demand response opportunities. Furthermore, this report summarizes the DR potential of three wastewater treatment facilities. In particular, Lawrence Berkeley National Laboratory (LBNL) has collected data at these facilities from control systems, submetered process equipment, utility electricity demand records, and governmental weather stations. The collected data were then used to generate a summary of wastewater power demand, factors affecting that demand, and demand response capabilities. These case studies show that facilities that have implemented energy efficiency measures and that have centralized control systems are well suited to shed or shift electrical loads in response to financial incentives, utility bill savings, and/or opportunities to enhance reliability of service. In summary, municipal wastewater treatment energy demand in California is large, and energy-­intensive equipment offers significant potential for automated demand response. In particular, large load reductions were achieved by targeting effluent pumps and centrifuges. One of the limiting factors to implementing demand response is the reaction of effluent turbidity to reduced aeration at an earlier stage of the process. Another limiting factor is that cogeneration capabilities of municipal facilities, including existing power purchase agreements and utility receptiveness to purchasing electricity from cogeneration facilities, limit a facility’s potential to participate in other DR activities.

  14. Emergency response facility technical data system of Taiwan Power Company

    Lin, E.; Liang, T.M.

    1987-01-01

    Taiwan Power Company (Taipower) has developed its emergency response facility program since 1981. This program is integrated with the following activities to enhance the emergency response capability of nuclear power plants: (1) survey of the plant instrumentation based on the requirements of R.G. 1.97; (2) improvement of plant specific emergency operating procedures based on the emergency response guidelines developed by the Owners group; (3) implementation of the detailed control room design review with the consideration of human engineering and task analysis; and (4) organization, staff and communication of emergency planning of nuclear power plant. The emergency response facility programs of Taipower are implemented in Chinshan (GE BWR4/MARK I), Kuosheng (GE BWR6/MARK III) and Maanshan (W PWR). The major items included in each program are: (1) to establish new buildings for On-Site Technical Support Center, Near-Site Emergency Operation Facility; (2) to establish an Emergency Executive Center at Taipower headquarters; (3) to establish the communication network between control room and emergency response facilities; and (4) to install a dedicated Emergency Response Facility Technical Data System (ERFTDS) for each plant. The ERFTDS provides the functions of data acquisition, data processing, data storage and display in meeting with the requirements of NUREG 0696. The ERFTDS is designed with plant specific requirements. These specific requirements are expected to be useful not only for the emergency condition but also for normal operation conditions

  15. 42 CFR 476.78 - Responsibilities of health care facilities.

    2010-10-01

    ... SERVICES (CONTINUED) QUALITY IMPROVEMENT ORGANIZATIONS UTILIZATION AND QUALITY CONTROL REVIEW Review Responsibilities of Utilization and Quality Control Quality Improvement Organizations (QIOs) General Provisions... 42 Public Health 4 2010-10-01 2010-10-01 false Responsibilities of health care facilities. 476.78...

  16. Phase associations and potential selective extraction methods for selected high-tech metals from ferromanganese nodules and crusts with siderophores

    Mohwinkel, Dennis; Kleint, Charlotte; Koschinsky, Andrea

    2014-01-01

    Highlights: • Phase associations of metals in marine Fe–Mn nodules and crusts were determined. • Selective leaching experiments with siderophore desferrioxamine B were conducted. • Siderophores selectively mobilize high-tech metals associated with Fe carrier phases. • Base metal liberation including Fe and Mn is limited. • Siderophores have promising potential for application in ore processing industries. - Abstract: Deep-sea ferromanganese deposits contain a wide range of economically important metals. Ferromanganese crusts and nodules represent an important future resource, since they not only contain base metals such as Mn, Ni, Co, Cu and Zn, but are also enriched in critical or rare high-technology elements such as Li, Mo, Nb, W, the rare earth elements and yttrium (REY). These metals could be extracted from nodules and crusts as a by-product to the base metal production. However, there are no proper separation techniques available that selectively extract certain metals out of the carrier phases. By sequential leaching, we demonstrated that, except for Li, which is present in an easily soluble form, all other high-tech metals enriched in ferromanganese nodules and crusts are largely associated with the Fe-oxyhydroxide phases and only to subordinate extents with Mn-oxide phases. Based on this fact, we conducted selective leaching experiments with the Fe-specific organic ligand desferrioxamine-B, a naturally occurring and ubiquitous siderophore. We showed by leaching of ferromanganese nodules and crusts with desferrioxamine-B that a significant and selective extraction of high-tech metals such as Li, Mo, Zr, Hf and Ta is possible, while other elements like Fe and the base metals Mn, Ni, Cu, Co and Zn are not extracted to large extents. The set of selectively extracted elements can be extended to Nb and W if Mn and carbonate phases are stripped from the bulk nodule or crust prior to the siderophore leach by e.g. a sequential leaching technique. This

  17. Security "high-tech" individual extra-light device mask 2.0: CAD/CAM evolution.

    Ramieri, V; Vellone, V; Crimi, S; Cascone, P

    2017-06-01

    In 2008, we presented our security "high-tech" individual extra-light device mask (SHIELD), a protective shield based on the face cast of an injured soccer player that can be customised. It allows a shortened convalescent period, is comfortable, fits well, and allows the patient to continue to play at a professional level in their chosen sport or activity in the shortest time possible. It has been used often in both amateur and professional categories of many sports, and we now present an update. Copyright © 2017 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  18. OUTLAY FOR COMMERCIALIZATION OF HIGH-TECH PRODUCTS IN THE CONTEXT OF MARKETING MODELS OF INNOVATION DIFFUSION

    O. Zhylinska

    2015-08-01

    Full Text Available The necessity of identifying the costs for commercialization of high-tech products is revealed based on theoretical assumptions of marketing models of innovation diffusion. The results obtained show the objective nature of the avalanche increase of transaction costs choice, caused by a high level of information asymmetry, which occurs in gaps in lifecycle of high technology products adoption. A development and systematization of marketing measures to bridge the gap in life cycle of high technology products adoption are made in accordance with the economic interests of the dominant categories of consumers.

  19. The link between organisational citizenship behaviours and open innovation: A case of Malaysian high-tech sector

    M. Muzamil Naqshbandi

    2016-12-01

    Full Text Available We examine the role of organisational citizenship behaviours (OCBs in two types of open innovation—inbound and outbound. Data were collected using the questionnaire survey technique from middle and top managers working in high-tech industries in Malaysia. Results show that OCBs positively predict both inbound and outbound open innovation. A closer look reveals that OCBs relate positively to out-bound open innovation in aggregate and in isolation. However, OCBs relate to in-bound open innovation in aggregate only. The implications of these results are discussed and limitations of the study are highlighted.

  20. Planning and implementing nuclear emergency response facilities

    Williams, D.H.

    1983-01-01

    After Three Mile Island, Arkansas Nuclear One produced a planning document called TMI-2 Response Program. Phase I of the program defined action plans in nine areas: safety assessment, training, organization, public information, communication, security, fiscal-governmental, technical and logistical support. Under safety assessment, the staff was made even better prepared to handle radioactive material. Under training, on site simulators for each unit at ANO were installed. The other seven topics interface closely with each other. An emergency control center is diagrammed. A habitable technical support system was created. A media center, with a large media area, and an auditorium, was built. Electric door strike systems increased security. Phone networks independently run via microwave were installed. Until Three Mile Island, logistical problems were guesswork. That incident afforded an opportunity to better identify and prepare for these problems

  1. Emergency preparedness and response plan for nuclear facilities in Indonesia

    Nur Rahmah Hidayati; Pande Made Udiyani

    2009-01-01

    All nuclear facilities in Indonesia are owned and operated by the National Nuclear Energy Agency (BATAN). The programs and activities of emergency planning and preparedness in Indonesia are based on the existing nuclear facilities, i.e. research reactors, research reactor fuel fabrication plant, radioactive waste treatment installation and radioisotopes production installation. The assessment is conducted to learn of status of emergency preparedness and response plan for nuclear facilities in Indonesia and to support the preparation of future Nuclear Power Plant. The assessment is conducted by comparing the emergency preparedness and response system in Indonesia to the system in other countries such as Japan and Republic of Korea, since the countries have many Nuclear Power Plants and other nuclear facilities. As a result, emergency preparedness response plan for existing nuclear facility in Indonesia has been implemented in many activities such as environmental monitoring program, facility monitoring equipment, and the continuous exercise of emergency preparedness and response. However, the implementation need law enforcement for imposing the responsibility of the coordinators in National Emergency Preparedness Plan. It also needs some additional technical support systems which refer to the system in Japan or Republic of Korea. The systems must be completed with some real time monitors which will support the emergency preparedness and response organization. The system should be built in NPP site before the first NPP will be operated. The system should be connected to an Off Site Emergency Center under coordination of BAPETEN as the regulatory body which has responsibility to control of nuclear energy in Indonesia. (Author)

  2. Spatial Planning and High-tech Development A comparative study of Eindhoven city-region, the Netherlands and Hsinchu City-region, Taiwan

    Wei-Ju Huang

    2013-08-01

    Full Text Available High-tech development—which lies at the very heart of the processes of economic growth—has been recognised by many developed and developing countries as a strategic instrument to enhance and sustain their competitiveness in the global economic network. Although the concept of high-tech development differs between countries, many share the underlying assumption that the core of high-tech development is to create a sound environment where innovation thrives. This ideology implies a definite spatial dimension. As a result, various spatial strategies have been formulated and implemented to support high-tech development. This has had intentional and unintentional effects on the economy, society and space. Numerous studies have been devoted to exploring, analysing and theorising this global phenomenon. However, there has been less attention given to the role spatial planning may play in the process of high-tech development and to the factors that shape the spatial planning approaches to high-tech development in a particular place. The major objectives of this research are to advance the knowledge of the role of spatial planning in the process of high-tech development, and to establish an analytical framework that helps reveal the major institutional factors that shape spatial planning mechanisms for dealing with the spatial issues of high-tech development in different places. This contributes to the field of high-tech spatial policies transfer and lesson-drawing. In order to explore the major factors that shape the practices of spatial planning in hightech development, a comparative approach is applied in this research. The Eindhoven city-region in the Netherlands and the Hsinchu city-region in Taiwan are selected as case study areas. Both city-regions can be recognised as success stories of high-tech development not only on a national scale but also on a global scale, despite the fact that they apply different approaches. In the Eindhoven city

  3. Plutonium Reclamation Facility incident response project progress report

    Austin, B.A.

    1997-01-01

    This report provides status of Hanford activities in response to process deficiencies highlighted during and in response to the May 14, 1997, explosion at the Plutonium Reclamation Facility. This report provides specific response to the August 4, 1997, memorandum from the Secretary which requested a progress report, in 120 days, on activities associated with reassessing the known and evaluating new vulnerabilities (chemical and radiological) at facilities that have been shut down, are in standby, are being deactivated or have otherwise changed their conventional mode of operation in the last several years. In addition, this report is intended to provide status on emergency response corrective activities as requested in the memorandum from the Secretary on August 28, 1997. Status is also included for actions requested in the second August 28, 1997, memorandum from the Secretary, regarding timely notification of emergencies

  4. Plutonium Reclamation Facility incident response project progress report

    Austin, B.A.

    1997-11-25

    This report provides status of Hanford activities in response to process deficiencies highlighted during and in response to the May 14, 1997, explosion at the Plutonium Reclamation Facility. This report provides specific response to the August 4, 1997, memorandum from the Secretary which requested a progress report, in 120 days, on activities associated with reassessing the known and evaluating new vulnerabilities (chemical and radiological) at facilities that have been shut down, are in standby, are being deactivated or have otherwise changed their conventional mode of operation in the last several years. In addition, this report is intended to provide status on emergency response corrective activities as requested in the memorandum from the Secretary on August 28, 1997. Status is also included for actions requested in the second August 28, 1997, memorandum from the Secretary, regarding timely notification of emergencies.

  5. Solar hybrid cooling system for high-tech offices in subtropical climate - Radiant cooling by absorption refrigeration and desiccant dehumidification

    Fong, K.F.; Chow, T.T.; Lee, C.K.; Lin, Z.; Chan, L.S.

    2011-01-01

    Highlights: → A solar hybrid cooling system is proposed for high-tech offices in subtropical climate. → An integration of radiant cooling, absorption refrigeration and desiccant dehumidification. → Year-round cooling and energy performances were evaluated through dynamic simulation. → Its annual primary energy consumption was lower than conventional system up to 36.5%. → The passive chilled beams were more energy-efficient than the active chilled beams. - Abstract: A solar hybrid cooling design is proposed for high cooling load demand in hot and humid climate. For the typical building cooling load, the system can handle the zone cooling load (mainly sensible) by radiant cooling with the chilled water from absorption refrigeration, while the ventilation load (largely latent) by desiccant dehumidification. This hybrid system utilizes solar energy for driving the absorption chiller and regenerating the desiccant wheel. Since a high chilled water temperature generated from the absorption chiller is not effective to handle the required latent load, desiccant dehumidification is therefore involved. It is an integration of radiant cooling, absorption refrigeration and desiccant dehumidification, which are powered up by solar energy. In this study, the application potential of the solar hybrid cooling system was evaluated for the high-tech offices in the subtropical climate through dynamic simulation. The high-tech offices are featured with relatively high internal sensible heat gains due to the intensive office electric equipment. The key performance indicators included the solar fraction and the primary energy consumption. Comparative study was also carried out for the solar hybrid cooling system using two common types of chilled ceilings, the passive chilled beams and active chilled beams. It was found that the solar hybrid cooling system was technically feasible for the applications of relatively higher cooling load demand. The annual primary energy

  6. An Innovative High-Tech Acupuncture Product: SXDZ-100 Nerve Muscle Stimulator, Its Theoretical Basis, Design, and Application

    Xinyan Gao

    2012-01-01

    Full Text Available We introduce the theoretical basis, design, and application of a patented innovative high-tech product, SXDZ-100 nerve and muscle stimulator. This product is featured with a built-in chip containing transcoding information from different acupuncture manipulation collected from the wide dynamic neurons (WDR in the spinal dorsal horn in animal experiments, which is bioinformation feedback therapy. The discharges of WDR neurons excited by different manipulations are analyzed using chaos theory in this study. It combines the advantages of manual acupuncture (MA like no receptor adaptation and treatment individualization and that of electroacupuncture (EA such as relatively low stimulation intensity and good quantification and thus makes it more effective than common stimulators in acupuncture clinic.

  7. Risk cognition as a new communication tool for high-tech industries. Comparative analysis between nuclear industry and biotechnology

    Steinhaeusler, F.; Wieland, P.

    2000-01-01

    Concerns of political decision makers, the media, and members of the public with regard to high-tech industries focus upon two main issues: safety and socio-economic impact. In this regard the nuclear industry and biotechnology, commonly associated as 'high risk and low trust situation', face the problems of the assessment of potentially dangerous or negative socio-economic consequences of very improbable risks and the communication with the various audiences. It is common for the national authorities in this case to conduct the process of quantified risk analysis (QRA). Unfortunately, hitherto the communication of the results obtained by QRA to the different non-scientific/non-technical target groups listed above is generally dissatisfactory, resulting in the frequent rejection of nuclear- and biotechnology. The main reason is that it has generally not been recognized that QRA is but the final step in the cognition of risk from both real as well as perceived hazards, preceded by risk estimation (RES) and risk evaluation (REV). RES is largely the scientific identification of hazards leading formally to the assessment of mechanisms of harmful consequences, and latterly to the assessment of the probability of its occurrence. Contrary to that, REV deals with the subjective judgment of the significance of assessed individual and societal risks. As such, REV involves individual cognitions of hazards and risks, such as perceptions, knowledge and understanding. In this paper the role of risk cognition in communicating issues associated with high-tech industrial activities, such as nuclear industry and biotechnology, is discussed. Common factors influencing risk perception are dealt with in a comparative manner in order to draw practically applicable lessons from it. This comparative analysis revealed the following results: (1)QRA-derived risk estimation measures used to quantify the risk from potential hazard associated with high-tech industries per se are not suitable

  8. ECONOMIC-MATHEMATICAL MODELING FLEXIBILITY AND PRODUCTIVITY RATIOS IN THE FORMATION OF A SYSTEM OF INTERNAL LOGISTICS OF HIGH-TECH ENTERPRISES

    V. Baranov

    2016-01-01

    Full Text Available The article describes the features of construction of the system internal logistics of high-tech enterprises. It describes a range of problems solved by these systems. As part of the internal logistics system is considered one of the tasks of operational and production management calendar. Considered in the article the problem associated with the formation of the production program of diversified production. As part of this task is received economic and mathematical model that establishes the relation between the parameters of fl exibility and performance to organizational and production structure of the high-tech enterprises.

  9. Impact of R&D expenditures on research publications, patents and high-tech exports among European countries.

    Meo, S A; Usmani, A M

    2014-01-01

    This study aimed to compare the impact of Research&Development (R&D) expenditures on research publications, patents and high-tech exports among European countries. In this study, 47 European countries were included. The information regarding European countries, their per capita Gross Domestic Product (GDP), R&D spending, number of universities, indexed scientific journals, high technology exports and number of patents were collected. We recorded the total number of research documents in various science and social sciences subjects during the period 1996-2011. The main source for information was World Bank, Web of Science, Thomson Reuters and SCImago/Scopus. The mean GDP per capita for all the European countries is 23372.64 ± 3588.42 US$, yearly per capita spending on R&D 1.14 ± 0.13 US$, number of universities 48.17 ± 10.26, mean number of Institute of Scientific Information (ISI) indexed journal per country 90.72 ± 38.47, high technology exports 12.86 ± 1.59 and number of patent applications 61504.23 ± 22961.85. The mean of research documents published in various science and social science subjects among all the European countries during the period 1996-2011 is 213405.70 ± 56493.04. Spending on R&D, number of universities, indexed journals, high technology exports and number of patents have a positive correlation with number of published documents in various science and social science subjects. We found a positive correlation between patent application and high-tech exports. However, there was no association between GDP per capita and research outcomes. It is concluded that, the most important contributing factors towards a knowledge based economy are spending on R&D, number of universities, scientific indexed journals and research publications, which in turn give a boast to patents, high technology exports and ultimately GDP.

  10. The Politics of Process Implementation: Explaining Variations Across Units in a High-Tech Firm

    Müller, Sune Dueholm

    political strategies for adopting consensus or conflict based leadership styles and management practices to process implementation depending on the actors' response patterns. The developed concepts and propositions contribute to the streams of literature on process innovation and Software Process...

  11. Try it, you’ll like it—or will you? : The perils of early free-trial promotions for high-tech service adoption

    Foubert, B.; Gijsbrechts, Els

    The proliferation of free trials for high-tech services calls for a careful study of their effectiveness, and the drivers thereof. On the one hand, free trials can generate new paying subscribers, by allowing consumers to become acquainted with the service free of charge. On the other hand, a

  12. The Effectiveness of the High-Tech Speech-Generating Device with Proloquo2Go App in Reducing Echolalia Utterances in a Student with Autism

    Alrusayni, Norah

    2017-01-01

    This study was conducted to determine the effectiveness of using the high-tech speech-generating device with Proloquo2Go app to reduce echolalic utterances in a student with autism during conversational speech. After observing that the iPad device with several apps was used by the students and that it served as a communication device, language…

  13. Comparing open innovation of innovative food SMEs with SMEs in the seed and high- tech industries - an analysis of 15 SMEs in the Netherlands

    Omta, Onno; Fortuin, Frances; Dijkman, Niels

    2018-01-01

    Various studies have shown that open innovation (OI) has become a basic requirement for the long-term survival of high-tech companies. However, also in an artisanal sector like the food industry OI has become increasingly important. To discover the extent to which innovative food and seed

  14. E-learning : a high-tech solution to industry training challenges

    Budd, G.

    2007-09-15

    A web-based e-learning system used to train oilsands upgrading employees was discussed in this article. While the majority of the upgrader's staff had previously worked in the oil and gas industry, many did not have adequate control system training. Use of the system avoided the need for upgrader downtime due to staff shortages during training periods, and avoided the need for on-site instructor-led classes. Savings of over $90,000 were made on a single training course by using the web-based system. A learning content management system (LCMS) was used to develop and customize learning modules so that the software could be customized for use at different facilities. Use of the e-learning system allows staff to mesh training time with regular work schedules and can save companies thousands of hours in training time. Information on the training modules is referenced in a database so that staff members can address new or additional systems, equipment, or technologies. It was concluded that a growing number of companies are using web-based learning systems. 2 figs.

  15. Infusing Technology into Customer Relationships: Balancing High-Tech and High-Touch

    Salomann, Harald; Kolbe, Lutz; Brenner, Walter

    In today's business environment, self-service is becoming increasingly important. In order to promote their self-service activities, banks have created online-only products and airlines offer exclusive discounts for passengers booking online. Self-service technologies' practical applications demonstrate this approach's potential. For example, Amtrak introduced an IVR (Interactive Voice Response) system, allowing cost savings of 13m; likewise Royal Mail installed an IVR system leading to a reduction of its customer service costs by 25% (Economist 2004).

  16. Empreendedorismo high-tech no Brasil: condicionantes econômicos, políticos e culturais

    Sonia M. K. Guimarães

    2010-04-01

    Full Text Available O artigo aborda o fenômeno do empreendedorismo tecnológico, em crescimento no Brasil, estimulado sobretudo pelo avanço das tecnologias de informação e comunicação e por ações governamentais como a Política de Desenvolvimento Produtivo, de maio de 2008, que propõe aumento de 10% no número de micro e pequenas exportadoras, até 2010. O estudo baseia-se em uma abordagem multidimensional que destaca a importância de aspectos econômicos, institucionais, culturais e cognitivos e que supõe uma articulação entre fatores objetivos e subjetivos, entre níveis micro e macro. Os dados empíricos foram coletados através de entrevistas realizadas com empreendedores cujas empresas encontram-se em incubadoras tecnológicas, localizadas em três campi de universidades, no estado do Rio Grande do Sul. As evidências encontradas reforçam a hipótese de que estaria ocorrendo o que se poderia chamar de "mudança cultural", no sentido de que profissionais com alta qualificação, demandados pelo mercado de trabalho, apresentam comportamentos, valores e objetivos, distintos dos esperados - obter um emprego bem remunerado em uma grande empresa, pública ou privada; ênfase nos valores econômicos; individualismo; exercício de poder.The article is concerned with discussing high tech entrepreneurship, which has grown in Brazil, fostered by the advancement of the information and communication technologies and by government actions, as illustrated by the Productive Development Policy, from May, 2008, which sets a target of 10 percent growth, for exporting micro and small enterprises, until 2010. The study was based on a multi-dimensional approach underlying the importance of the economic, institutional, cultural and cognitive factors and the interrelationship between the objective and subjective, the macro and micro levels. The empirical data were obtained through interviews with entrepreneurs whose firms are part of technological incubators, located

  17. Dynamic Response Testing in an Electrically Heated Reactor Test Facility

    Bragg-Sitton, Shannon M.; Morton, T. J.

    2006-01-01

    Non-nuclear testing can be a valuable tool in development of a space nuclear power or propulsion system. In a non-nuclear test bed, electric heaters are used to simulate the heat from nuclear fuel. Standard testing allows one to fully assess thermal, heat transfer, and stress related attributes of a given system, but fails to demonstrate the dynamic response that would be present in an integrated, fueled reactor system. The integration of thermal hydraulic hardware tests with simulated neutronic response provides a bridge between electrically heated testing and full nuclear testing. By implementing a neutronic response model to simulate the dynamic response that would be expected in a fueled reactor system, one can better understand system integration issues, characterize integrated system response times and response characteristics, and assess potential design improvements at a relatively small fiscal investment. Initial system dynamic response testing was demonstrated on the integrated SAFE-100a heat pipe cooled, electrically heated reactor and heat exchanger hardware, utilizing a one-group solution to the point kinetics equations to simulate the expected neutronic response of the system (Bragg-Sitton, 2005). The current paper applies the same testing methodology to a direct drive gas cooled reactor system, demonstrating the applicability of the testing methodology to any reactor type and demonstrating the variation in system response characteristics in different reactor concepts. In each testing application, core power transients were controlled by a point kinetics model with reactivity feedback based on core average temperature; the neutron generation time and the temperature feedback coefficient are provided as model inputs. Although both system designs utilize a fast spectrum reactor, the method of cooling the reactor differs significantly, leading to a variable system response that can be demonstrated and assessed in a non-nuclear test facility.

  18. Proposal of a system of indicators to assess the training of experts in a high-tech organization

    Elías Hardy, Lidia Lauren; González Olaguive, Elizabeth Vicenta; Martínez Martínez, Elisa

    2015-01-01

    Objective: present a proposal of a system of indicators to assess actions aimed at the training and development of experts in a high-tech organization. Methods: an analysis was conducted of the various theories dealing with the training and development of experts, examining their features and components. Design of the system of indicators was based on surveys and direct observation. The system of indicators thus designed was validated with the Delphi method, the application of the Likert scale and the statistical treatment of answers provided by experts, using median and interquartile range values to establish the consensus of experts. Results: a working definition is proposed of the concept expert based on two dimensions: qualification and performance, and individual and collective variables, indicators and measurement criteria. Cronbach's alpha coefficient (0,8655) showed the internal consistency of the tool used. The median and interquartile range values obtained made it possible to establish the consensus of participants in the validation of the system of indicators. Conclusions: the system of indicators developed and its two dimensions make it possible to assess the training and development of experts at the Cuban Neuroscience Center, as well as the system of actions performed. The indicator showing the lowest results is that of productivity of experts in the training of human resources of high academic level. (author)

  19. New perspective in high tech radiotherapy planning using PET/CT images (Radiation oncologist's view on PET/CT usage)

    Hadjieva, T.; Bildirev, N.; Koleva, I.; Zahariev, Z.; Vasileva, V.; Encheva, E.; Sultanov, B.

    2010-01-01

    Biological images provided by 18F-FDG PET in combination with structural X ray picture currently offer the most accurate available information on tumour staging, curative antitumour effect for prognosis, impairment of organ function after treatment, as well as primary tumour detection in unknown primary metastatic disease. The authors as radiation oncologists critically have analyzed numerous clinical trials and two guidelines to prove PET/ CT benefit in radiotherapy practice. At present they found lack of scientific evidence to confirm that patient outcomes are superior as a result of the use of PET in RT planning. PET/CT offers a best image for tumour delineation only in some cases of lung cancer, mediastinal lymph nodes and malignant lymphomas. 11C methionin PET adds additional information on postoperative MRI image for brain tumours. Inflammation as postradiation phenomenon, as well as physiological organ movements leads to false-positive PET signal. High tech radiotherapy methods require delineation on precise images given after multidisciplinary team expertise - a practice that is possible only in clinical trials, These unsolved problems have raised many ethical challenges in medical, scientific and social aspect, if wide and routine use of FDG-PET u PET/CT is advocated. (authors)

  20. Proposing a Qualitative Approach for Corporate Competitive Capability Modeling in High-Tech Business (Case study: Software Industry

    Mahmoud Saremi Saremi

    2010-09-01

    Full Text Available The evolution of global business trend for ICT-based products in recent decades shows the intensive activity of pioneer developing countries to gain a powerful competitive position in global software industry. In this research, with regard to importance of competition issue for top managers of Iranian software companies, a conceptual model has been developed for Corporate Competitive Capability concept. First, after describing the research problem, we present a comparative review of recent theories of firm and competition that has been applied by different researchers in the High-Tech and Knowledge Intensive Organization filed. Afterwards, with a detailed review of literature and previous research papers, an initial research framework and applied research method has been proposed. The main and final section of paper assigned to describing the result of research in different steps of qualitative modeling process. The agreed concepts are related to corporate competitive capability, the elicited and analyzed experts Cause Map, the elicited collective causal maps, and the final proposed model for software industry are the modeling results for this paper.

  1. Phytochrome-mediated responses: Implications for controlled environment research facilities

    Smith, Harry

    1994-01-01

    Light is undoubtedly the most important environmental variable for plant growth and development; plants not only use radiant energy in photosynthesis, they also respond to the quantity, quality, direction and timing of incident radiation through photomorphogenic response that can have huge effects on the rate of growth and the pattern of development. It is surprising, therefore, that the manufacturers and suppliers of controlled environment facilities have been singularly uninventive in the design of the lighting assemblies they provide. The consumer has one choice only - a lighting assembly that provides irradiance levels usually only a fraction of sunlight, and a control system that is limited to regulating the timing of the on-off switch. The reasons for these limitations are partly technological, but in the main they result from ignorance on the part of both the consumer and the manufacturer. A specific and powerful example of this ignorance relates to the importance of the so-called far-red wavelengths (FR = 700-800 nm). Because the human eye can hardly detect wavelengths above 700 nm, and photosynthesis also cuts off at about 700 nm, the majority of plant and crop physiologists are still almost completely unaware that FR radiation can have massive effects on growth rate and development. In consequence, most growth cabinets have light sources based on fluorescent tubes, and provide very little FR apart from that emitted by a token number of small incandescent bulbs. Larger growth facilities often use broader spectrum light sources, but growth facilities that provide the capability to vary the FR incident upon the plants are about as abundant as seals in the Sahara. This article sets the background of the significance of FR radiation in the natural environment and its importance for plant growth and development in the hope that it might inform intelligently those concerned with improving the design of plant growth facilities.

  2. Phytochrome-mediated responses implications for controlled environment research facilities

    Smith, H. [Univ. of Leicester (United Kingdom)

    1994-12-31

    Light is undoubtedly the most important environmental variable for plant growth and development; plants not only use radiant energy in photosynthesis, they also respond to the quantity, quality, direction and timing of incident radiation through photomorphogenic responses that can have huge effects on the rate of growth and the pattern of development. It is surprising, therefore, that the manufacturers and suppliers of controlled environment facilities have been singularly uninventive in the design of the lighting assemblies they provide. The consumer has one choice only - a lighting assembly that provides irradiance levels usually only a fraction of sunlight, and a control system that is limited to regulating the timing of the on-off switch. The reasons for these limitations are partly technological, but in the main they result from ignorance on the part of both the consumer and the manufacturer. A specific and powerful example of this ignorance relates to the importance of the so-called far-red wavelengths (FR = 700-800 nm). Because the human eye can hardly detect wavelengths above 700 nm, and photosynthesis also cuts off at ca. 700 mn, the majority of plant and crop physiologists are still almost completely unaware that FR radiation can have massive effects on growth rate and development. In consequence, most growth cabinets have light sources based on fluorescent tubes, and provide very little FR apart from that emitted by a token number of small incandescent bulbs. Larger growth facilities often use broader spectrum light sources, but growth facilities that provide the capability to vary the FR incident upon the plants are about as abundant as seals in the Sahara. This article sets the background of the significance of FR radiation in the natural environment and its importance for plant growth and development in the hope that it might inform intelligently those concerned with improving the design of plant growth facilities.

  3. From low cost to high tech: possible margins of technical progress in photovoltaic

    Guillemoles, J.F.

    2009-01-01

    Photovoltaic is developing in response to 3 requirements: conservation of the environment, security in energy, and economic growth. Given this, the terawatt (TW) scale should be used to measure the magnitude of energy needs. Can solar, in particular photovoltaic, power meet these needs? This has nothing to do with the availability of solar energy - in a single hour, the sun sends to the earth as much energy as the electricity consumed by all of humanity during an entire year. Instead, it raises questions about the industrial deployment and, eventually, the availability of raw materials and land. The sustainable development of photovoltaic power implies wisely using resources (raw materials, energy and capital) and improving the efficiency not only of the process for transforming resources into photovoltaic units but also of the photovoltaic units themselves for converting light into electricity. It is worth noting that the predictable change of scale in the photovoltaic industry will have implications for this industry's deployment on a large scale. This deployment depends on: the availability of technology, know-how, capital and raw materials; the cost of investments; the speed of implementation; and the rhythm of production of cells. (author)

  4. How Is Corporate Social Responsibility Addressed by Biotech Firms? a Case Study Analysis

    Pérez-Bustamante, Guillermo

    2013-01-01

    This paper explores corporate social responsibility (CSR) in the biotech high-tech sector as a way to achieve competitive advantages. After presenting the importance of science for high-tech firms, the paper focuses on the social and economic role of CSR. Next, the primary reasons for firms' engagement in CSR activities are presented, followed by…

  5. 41 CFR 102-74.15 - What are the facility management responsibilities of occupant agencies?

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What are the facility management responsibilities of occupant agencies? 102-74.15 Section 102-74.15 Public Contracts and Property... PROPERTY 74-FACILITY MANAGEMENT Facility Management § 102-74.15 What are the facility management...

  6. Beyond high tech

    Günzel, Franziska; Wilker, Helge

    2012-01-01

    Technology plays an important role for any start-up as an opportunity to be exploited, as well as an enabler to structure the start-up's activities to better generate value. The business model is a useful tool in these settings to keep track of technology and understand its potential value for th...

  7. High-Tech Cruelty

    Hinduja, Sameer; Patchin, Justin W.

    2011-01-01

    Cyberbullying is a growing problem because increasing numbers of young people use computers, cell phones, and other interactive devices as their main form of social interaction. Cyberbullies use technology to harass, threaten, or humiliate their peers. Online aggression isn't just traditional bullying with new tools. It's widespread, devastating,…

  8. High tech application

    1988-01-01

    Equipment for vacuum deposition of conductor tracks on three sets of quartz plates. This technique requires exceptionally clean working conditions. This technique requires exceptionally clean working conditions.

  9. A High Tech Future.

    Nettle, Audrey

    The new vocationalism in education could be said to be an effect of changes in the greater society--arriving after the changes have already happened. There has been a shift in the nature of the advanced capitalist countries, such as the United States. Giant companies have, through advances in communications technology, become able to control…

  10. Understanding the role of attitude components in co-branding: an application to high-tech, luxury co-branded products

    Lado Couste, Nora Rita; Césaroni, Fabrizio; Maydeu Olivares, Alberto; Ho, Han Chiang

    2011-01-01

    This study addresses co-branding between firms belonging to unrelated value chains –high-tech products and luxury brands (HLCPs) – to explore how consumers‟ attitude drive the success of HLCPs. The study applies the tri-component attitude model (as opposed to attitude as a whole) that uses affect and cognition to predict purchase intention of co-branded products. Cultural differences (Spanish and Taiwanese) in consumers‟ behavior are also assessed. Data collected in a survey show that Spanish...

  11. Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices

    Sezdi, Mana

    2016-01-01

    A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older tec...

  12. Facility Response Plan (FRP) Points, Region 9, 2014, US EPA Region 9

    U.S. Environmental Protection Agency — A Facility Response Plan (FRP) demonstrates a facility's preparedness to respond to a worst case oil discharge. Under the Clean Water Act, as amended by the Oil...

  13. Facility Response Plan (FRP) Points, Region 9, 2013, US EPA Region 9

    U.S. Environmental Protection Agency — A Facility Response Plan (FRP) demonstrates a facility's preparedness to respond to a worst case oil discharge. Under the Clean Water Act, as amended by the Oil...

  14. Facility Response Plan (FRP) Points, Region 9, 2012, US EPA Region 9

    U.S. Environmental Protection Agency — A Facility Response Plan (FRP) demonstrates a facility's preparedness to respond to a worst case oil discharge. Under the Clean Water Act, as amended by the Oil...

  15. Facility Response Plan (FRP) Inspected Points, Region 9, 2014, US EPA Region 9

    U.S. Environmental Protection Agency — A Facility Response Plan (FRP) demonstrates a facility's preparedness to respond to a worst case oil discharge. Under the Clean Water Act, as amended by the Oil...

  16. Seismic response analyses for reactor facilities at Savannah River

    Miller, C.A.; Costantino, C.J.; Xu, J.

    1991-01-01

    The reactor facilities at the Savannah River Plant (SRP) were designed during the 1950's. The original seismic criteria defining the input ground motion was 0.1 G with UBC [uniform building code] provisions used to evaluate structural seismic loads. Later ground motion criteria have defined the free field seismic motion with a 0.2 G ZPA [free field acceleration] and various spectral shapes. The spectral shapes have included the Housner spectra, a site specific spectra, and the US NRC [Nuclear Regulatory Commission] Reg. Guide 1.60 shape. The development of these free field seismic criteria are discussed in the paper. The more recent seismic analyses have been of the following type: fixed base response spectra, frequency independent lumped parameter soil/structure interaction (SSI), frequency dependent lumped parameter SSI, and current state of the art analyses using computer codes such as SASSI. The results from these computations consist of structural loads and floor response spectra (used for piping and equipment qualification). These results are compared in the paper and the methods used to validate the results are discussed. 14 refs., 11 figs

  17. Where High-Tech Meets High-Touch: an example of effective cross-disciplinary collaboration in education

    Holzhauer, B.; Mooney, M. E.

    2012-12-01

    How can non-formal education programs effectively blend hands-on, place-based field science lessons with technology and digital media to teach abstract global concepts in a local setting? Using climate change as an overarching concept, the Aldo Leopold Nature Center (ALNC) in Madison, WI, is developing exhibits and digital curricula, strengthened through partnerships with local and national experts from scientific and education fields, to effectively increase the public's interest in and understanding of science and technology, how the world works, and what we can do to adapt, mitigate, and innovate sustainable solutions. The exhibits and multimedia content, centered on topics such as climate, energy, weather, and phenology, have been developed in consultation with partners like the National Academy of Sciences and various departments at the University of Wisconsin (UW). Outdoor "high-touch" programs are complemented with "high-tech" exhibits and media, including touchscreen kiosks and the National Oceanic and Atmospheric Administration's (NOAA) Science On a Sphere® global display system, tying together multimedia experiences with peer-reviewed cutting-edge science to ensure maximum comprehension by appealing and connecting to learners of all ages and learning modalities. The curriculum is being developed in alignment with local and national education standards and science and climate literacy frameworks (such as "The Essential Principles of Climate Sciences," U.S. Global Change Research Program / U.S. Climate Change Science Program). Its digital format allows it to be easily adapted to visitors' learning styles and cognitive levels and updated with relevant new content such as real-time climate data or current visualizations from the UW Cooperative Institute for Meteorological Satellite Studies. Drawing upon ALNC's award-winning environmental education experiences, professional development networks such as NOAA's Climate Stewards Education Program, and existing

  18. Home Here, Home There: The lives and Landscape within High-tech Trans-Pacific Commuter Culture

    Shenglin Chang

    2004-12-01

    Full Text Available Within the last two decades the issue of 'home identity' (how a home reflects a person's identity has been an emerging topic within contemporary intellectual discourse in fields as diverse as Asian-American studies, anthropology, cultural geography, cultural studies, literary criticism and landscape architecture. In this article, I focus on the transnational experiences of members of a newly emerging trans-Pacific commuter culture, and give special attention to describing how individual members of this group construct the relationship between self and landscape. This article reveals the complex process in which members of a newly emerging trans-Pacific commuter culture have developed new non-traditional ways of constructing the landscape/home relationship - ways that call for challenging essentialist versions of home within a rapidly changing information age. I examine how Taiwanese-born, high-tech computer engineers who relocated to Silicon Valley engage in a struggle between their old identities and their newly forming American identities. These engineers and their families - members of the 'trans-Pacific home phenomenon' that emerged in the late 1990s - have a lifestyle in which they regularly commute between their American and Taiwanese homes. The ease of global travel and instant worldwide communication that became available in the 1990s afforded the trans-Pacific commuter group ease of travel, simultaneous ownership of two homes, and led to the reinvention of the relationship between global and local within the construction of self and home. This article explores how members of the trans-Pacific commuter culture struggle to make sense between the here-and-there homes across the Pacific Rim. With evidence from 80 interviews conducted in Silicon Valley (USA, Hsinchu (Taiwan, and Shanghai and Beijing (China, I focus on the ways in which members of the global-commuter group invented new, non-essentialist ways of constructing their home

  19. IMPROVING THE EFFICIENCY OF THE STATE FINANCIAL CONTROL IN THE SPHERE OF HIGH-TECH MILITARY-INDUSTRIAL COMPLEX

    Anzhela Zakhitovna Namitulina

    2016-01-01

    Full Text Available The presented research topic is particularly relevant due to the high value and the need to strengthen fi nancial control for the development of the military-industrial complex (MIC, to ensure the country's economic security, preservation and development of scientifi c and technical potential. The urgency of acquiring those aspects of economic relations which are connected with the supply the export of high-tech military products in a limited budget funding State should have levers of infl uence on the functioning of the military-industrial complex, the ability to pursue an independent foreign military-technical policy. In the new economic conditions, it became necessary to address the problems of fi nancial security of the defense-industrial complex, in order to strengthen the independence and security of Russia, as well as the need to give priority nature of the measures of state control in the economy related to the implementation of the defense order, ie, in the sphere of military-industrial complex. At the present stage of economic development of Russia, the rate of growth of the national economy largely depends on what the situation is in the military-industrial complex (MIC. This is due to the fact that the defense industry is the most high-quality, high-tech economy. It concentrated the largest part of the Russian potential, the best staff of scientists and experts. Products and DIC technology widely used in other industries. The modern military-industrial complex produces a signifi cant part of civil production. DIC integration with civilian industries – it is also a technological basis for solving the basic problems currently facing the Russian economy, and, above all, the basis of the formation of a new technological basis for the development of high technology and competitive products, which determines the pace of scientifi c and technological progress and the growth of the national economy. Objectives. The aim of the paper is the

  20. EDITORIAL: Special issue featuring articles arising from the 11th High-Tech Plasma Processes Conference Special issue featuring articles arising from the 11th High-Tech Plasma Processes Conference

    Bruggeman, Peter; Degrez, Gérard; Delplancke, Marie-Paule; Gleizes, Alain

    2011-05-01

    The 11th High-Tech Plasma Processes Conference (HTPP) was held in Brussels, Belgium, 27 June-2 July, 2010. HTPP started as a thermal plasma conference and gradually expanded to include low-temperature plasmas. The conference was founded by Jacques Amouroux and Pierre Fauchais, and aims to bring together different scientific communities to facilitate contacts between science, technology and industry, providing a platform for the exploration of elementary processes and applications in and by plasmas. The first HTPP was held in Odeillo, France, in 1990. Since then it has been held every other year in different European cities: Paris, Aachen, Athens, Strasbourg, Saint-Petersburg, Patras and Brussels. The 11th HTPP conference was attended by 125 participants from 19 countries. The program involved 14 invited talks, 34 contributed talks, 72 posters and a software demonstration and hands-on session for plasma modelling. The 12th HTPP conference will be held 24-28 June 2012, in Bologna, Italy. A larger part of the contributions to the 11th HTPP has been published in the Journal of Physics: Conference Series (JPCS) volume 275, 2011. All invited speakers and other contributors, as selected by the Steering, Scientific and Organizing Committee, were invited to submit a paper based on their contributions for this special issue which is peer reviewed by the journal. Both this special issue and the JPCS volume aim to bring the 11th HTPP to a wider audience. The publications are a nice example of the broad topic range of the conference. The JPCS volume contains papers covering fundamental aspects on radiative processes of thermal plasmas, modelling of thermal arcs and non-thermal RF plasma jets, plasma diagnostics including flow and heat flux measurements of thermal plasmas, radical density measurements and laser-induced breakdown spectroscopy. The applications-oriented contributions of the JPCS volume include plasma spraying, synthesis of (nano-sized) materials, surface

  1. Young people progressive mentality’s training in conditions of civilization changes within the impact of information and high-tech progress

    N. V. Polishchuk

    2017-01-01

    It has been shown that the Ukrainian nation is looking for its own path of development (civilizational, spiritual, cultural, mental, economic, political, social in modern, post-industrial, postmodern information and high-tech world. It is necessary to attract both public institutions, and educational ones to the intensification of its development taking into account the mentality of our nation, which has its historical origins and values, its specific way of thinking, specific worldview in the system of spiritual life. That is the only way to form the young generation of Ukrainians — happy, educated, spiritually and financially rich with progressive thinking and mentality.

  2. External Knowledge Acquisition Needs a Hand? The Dual Effects of Industry-University Collaborations on High-Tech Firms’ Innovation Capability in China

    Li-Ying, Jason; Wang, Yuandi; Salomo, Søren

    2012-01-01

    , the available licensing data to public starts from 2000 to 2009. We limit our sample to those firms who engaged in foreign technology licensing-in activities during 2000 to 2003, which resulted in a sample of 91 Chinese licensee firms in high-tech sector. This period is chosen in order to obtain an appropriate....... According to the ‘Administration of Record Filing of Technology Licensing’, the SIPO is authorized to fill the records of technology licensing in China. A record contains more valuable information: names of licensor, licensee, and licensed patents, contracting number, date, and license type. So far...

  3. Planning for off-site response to radiation accidents in nuclear facilities

    1981-01-01

    The purpose of this publication is to give guidance to those who are responsible for the protection of the public in the event of an accident occurring at a land-based nuclear facility. This guidance should assist in the advance preparation of emergency response plans and implementing procedures. Basic principles of protective measures along with their advantages and disadvantages are discussed. Other principles related to emergency planning and the operational response to an emergency are outlined. Although the guidance is primarily oriented towards land-based nuclear power facilities, the guidance does have general application to other types of nuclear facility

  4. Planning for off-site response to radiation accidents in nuclear facilities

    1979-01-01

    The purpose of this manual is to give guidance to those who are responsible for the protection of the public in the event of an accident occurring at a land-based nuclear facility. This guidance should assist in the advance preparation of emergency response plans and implementing procedures. Basic principles of protective measures along with their advantages and disadvantages are discussed. Other principles related to emergency planning and the operational response to an emergency are outlined. Although the guidance is primarily oriented toward land-based nuclear power facilities, the guidance does have general application to other types of nuclear facilities

  5. Consumer Response to Gastrointestinal Illness Perceived To Originate from Food Service Facilities.

    Garnett, Erin S; Gretsch, Stephanie R; Null, Clair; Moe, Christine L

    2016-10-01

    Consumer responses to food product recalls have been documented, but there is little information on how consumers respond to illnesses or outbreaks associated with food service facilities. This study uses an on-line survey of 885 adults conducted in 2012 to determine how respondents changed their dining behavior following personal experiences with and secondhand reports of gastrointestinal illness believed to be associated with food service facilities. In response to personally experiencing gastrointestinal illness that they attributed to a food service facility, 90% of survey participants reported that they avoided the implicated facility for a time following the incident; almost one-half decided to never return to the facility they believed had made them ill. In response to a secondhand report of gastrointestinal illness, 86% of respondents reported they would avoid the implicated facility for a time, and 22% said they would never return to the facility. After both personal experiences of illness and secondhand reports of illness, consumer responses were significantly more severe toward the implicated facility than toward all other food service facilities. Frequent diners avoided facilities for shorter periods of time and were less likely to never go back to a facility than were infrequent diners. The survey results indicate that 24 to 97 fewer meals were purchased per respondent, or a 11 to 20% reduction in meals purchased outside the home, in the year following respondents' illness. Future estimates of the economic burden of foodborne illnesses, including those caused by noroviruses, should consider the impacts on the food service industry attributable to changes in consumer behavior, in addition to health care costs and loss of productivity.

  6. Oak Ridge National Laboratory Gunite and Associated Tanks Stabilization Project-Low-Tech Approach with High-Tech Results

    Brill, A.; Alsup, T.; Bolling, D.

    2002-01-01

    Environmental restoration of the Gunite and Associated Tanks (GAAT) at the Oak Ridge National Laboratory (ORNL) was a priority to the U. S. Department of Energy (DOE) because of their age and deteriorating structure. These eight tanks ranging up to 170,000 gallons in capacity were constructed in 1943 of a Gunite or ''sprayed concrete material'' as part of the Manhattan Project. The tanks initially received highly radioactive waste from the Graphite Reactor and associated chemical processing facilities. The waste was temporarily stored in these tanks to allow for radioactive decay prior to dilution and release into surface waters. Over time, additional wastes from ongoing ORNL operations (e.g., isotope separation and materials research) were discharged to the tanks for storage and treatment. These tanks were taken out of service in the 1970s. Based on the structure integrity of GAAT evaluated in 1995, the worst-case scenario for the tanks, even assuming they are in good condition, is to remain empty. A recently completed interim action conducted from April 1997 through September 2000 removed the tank liquids and residual solids to the extent practical. Interior video surveys of the tanks indicated signs of degradation of the Gunite material. The tanks continued to receive inleakage, which generated a relatively high volume waste stream that required periodic removal, treatment, and disposal. For these reasons, DOE chose in-place stabilization of Tanks W-3 through W-10 as a non-timecritical removal action under Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). Tank stabilization activities involved removal of liquid from inleakage and placement of a grout mixture or ''flowable fill'' into the tanks to within 3-ft of the ground surface. Bechtel Jacobs Company, LLC (BJC) awarded Safety and Ecology Corporation (SEC) a subcontract in March 2001 to complete the documentation and fieldwork necessary to achieve tank stabilization in

  7. Training and exercises of the Emergency Response Team at the Los Alamos Plutonium Facility

    Yearwood, D.D.

    1988-01-01

    The Los Alamos National Laboratory Plutonium Facility has an active Emergency Response Team. The Emergency Response Team is composed of members of the operating and support groups within the Plutonium Facility. In addition to their initial indoctrination, the members are trained and certified in first-aid, CPR, fire and rescue, and the use of self-contained-breathing-apparatus. Training exercises, drills, are conducted once a month. The drills consist of scenarios which require the Emergency Response Team to apply CPR and/or first aid. The drills are performed in the Plutonium Facility, they are video taped, then reviewed and critiqued by site personnel. Through training and effective drills and the Emergency Response Team can efficiently respond to any credible accident which may occur at the Plutonium Facility. 3 tabs

  8. Computer Security Incident Response Planning at Nuclear Facilities

    2016-06-01

    The purpose of this publication is to assist Member States in developing comprehensive contingency plans for computer security incidents with the potential to impact nuclear security and/or nuclear safety. It provides an outline and recommendations for establishing a computer security incident response capability as part of a computer security programme, and considers the roles and responsibilities of the system owner, operator, competent authority, and national technical authority in responding to a computer security incident with possible nuclear security repercussions

  9. A Game Theoretical Model for Location of Terror Response Facilities under Capacitated Resources

    Lingpeng Meng

    2013-01-01

    Full Text Available This paper is concerned with the effect of capacity constraints on the locations of terror response facilities. We assume that the state has limited resources, and multiple facilities may be involved in the response until the demand is satisfied consequently. We formulate a leader-follower game model between the state and the terrorist and prove the existence and uniqueness of the Nash equilibrium. An integer linear programming is proposed to obtain the equilibrium results when the facility number is fixed. The problem is demonstrated by a case study of the 19 districts of Shanghai, China.

  10. The pre-licensing of a multi-purpose hybrid research reactor for high-tech applications 'MYRRHA'

    Hakimi, N.; Dams, C.; Wertelaers, A.; Nys, V.; Schrauben, M.; Dresselaers, R.

    2013-01-01

    The Belgian Nuclear Research Centre in Mol has been working for several years on the design of a multi-purpose flexible irradiation facility in order to replace the ageing BR2, a multipurpose materials testing reactor (MTR), in operation since 1962. MYRRHA, a flexible fast spectrum research reactor is conceived as an accelerator driven system (ADS), able to operate in sub-critical and critical modes. It contains a proton accelerator of 600 MeV, a spallation target and a multiplying medium with MOX fuel, cooled by liquid lead-bismuth (Pb-Bi). Since February 2011, the Belgian Nuclear Research Centre has engaged in a 'pre-licensing' process with the regulatory authority for an estimated period up to mid 2014. The paper presents on the one hand the objectives of the pre-licensing phase as well as its implementation process and on the other hand, 2 implementing instruments which have been developed by the regulatory authority providing guidance to the designer of MYRRHA in order to meet the pre-licensing phase objectives. The first instrument is a strategic note for the design and operation of MYRRHA where as the second instrument is a guidance document for the format and content of a design options and provisions file (DOPF). Both instruments have been developed taking into account that MYRRHA is an irradiation facility using a Generation IV nuclear power system's type technology (liquid metal cooled fast neutron reactor). The strategic note overview aims to cover the safety approach as well as the security requirements and safeguards obligation applicable to MYRRHA. In particular, in the strategic note, a specific attention has been paid in order to ensure that a safety, security and safeguards integrated approach will drive the development of the MYRRHA design. The safety approach focuses on the safety goals and the minimum safety objectives set by the regulatory authority for this innovative design. The DOPF overview presents its objectives and structure resuming

  11. NRAO Response to NSF Senior Review of Astronomy Facilities

    2006-11-01

    The National Science Foundation's (NSF) Astronomy Senior Review Committee report (pdf file), released today, made major recommendations for restructuring the NSF's ground-based astronomy efforts, including significant changes for the National Radio Astronomy Observatory (NRAO). The committee's report urged that leadership in radio astronomy, including millimeter- and submillimeter-wave observatories, "remain centered at NRAO as it is, by far, the largest radio astronomy organization in the world." The report praised the record of management of NRAO and the scientific capabilities of the Atacama Large Millimeter/submillimeter Array (ALMA), the Expanded Very Large Array (EVLA), the Robert C. Byrd Green Bank Telescope (GBT), and the Very Long Baseline Array (VLBA). However, the report also recommended that some reductions and changes occur at the NRAO by 2011. Specifically, the report recommended that: (a) VLBA operations make a transition to a significant reliance on international funding or risk closure; (b) GBT operations costs be reduced; and (c) NRAO scientific staff costs be reduced. "The Senior Review Committee had the very difficult task of reconciling the needs of current facilities and funding new facilities for the future of astronomy. We appreciate their efforts and look forward to working with the NSF to ensure that the valuable and unique research capabilities of our NRAO telescopes continue to serve the astronomical community," said Dr. Fred K.Y. Lo, NRAO Director. The VLBA provides the greatest angular resolution, or ability to see fine detail, of any telescope in the world, greatly exceeding the capabilities of the Hubble Space Telescope and the future Square Kilometre Array. The committee recognized that, "if the VLBA is closed, a unique capability would likely be lost for decades." "The VLBA is used by scientists from around the world because of its unique capabilities. It has produced landmark research milestones and the committee recognized in its

  12. Corporate Social Responsibility: a proposal for its assessment in Cuban hotel facilities

    Yusmelys Ferrales-Arias

    2017-12-01

    Full Text Available The present article, after addressing the fundamental elements that characterize the corporate social responsibility approach, proposes a procedure for its evaluation in Cuban hotel facilities through the use of instruments based on indicators developed for this purpose. The study focuses on measuring the degree of social responsibility and the level of responsible performance that allows the installation management to properly align the practices of social responsibility with the installation strategy.

  13. Development and evaluation of fully automated demand response in large facilities

    Piette, Mary Ann; Sezgen, Osman; Watson, David S.; Motegi, Naoya; Shockman, Christine; ten Hope, Laurie

    2004-03-30

    This report describes the results of a research project to develop and evaluate the performance of new Automated Demand Response (Auto-DR) hardware and software technology in large facilities. Demand Response (DR) is a set of activities to reduce or shift electricity use to improve electric grid reliability, manage electricity costs, and ensure that customers receive signals that encourage load reduction during times when the electric grid is near its capacity. The two main drivers for widespread demand responsiveness are the prevention of future electricity crises and the reduction of electricity prices. Additional goals for price responsiveness include equity through cost of service pricing, and customer control of electricity usage and bills. The technology developed and evaluated in this report could be used to support numerous forms of DR programs and tariffs. For the purpose of this report, we have defined three levels of Demand Response automation. Manual Demand Response involves manually turning off lights or equipment; this can be a labor-intensive approach. Semi-Automated Response involves the use of building energy management control systems for load shedding, where a preprogrammed load shedding strategy is initiated by facilities staff. Fully-Automated Demand Response is initiated at a building or facility through receipt of an external communications signal--facility staff set up a pre-programmed load shedding strategy which is automatically initiated by the system without the need for human intervention. We have defined this approach to be Auto-DR. An important concept in Auto-DR is that a facility manager is able to ''opt out'' or ''override'' an individual DR event if it occurs at a time when the reduction in end-use services is not desirable. This project sought to improve the feasibility and nature of Auto-DR strategies in large facilities. The research focused on technology development, testing

  14. Study of developing nuclear fabrication facility's integrated emergency response manual

    Kim, Taeh Yeong; Cho, Nam Chan; Han, Seung Hoon; Moon, Jong Han; Lee, Jin Hang; Min, Guem Young; Han, Ji Ah

    2016-01-01

    Public begin to pay attention to emergency management. Thus, public's consensus on having high level of emergency management system up to advanced country's is reached. In this social atmosphere, manual is considered as key factor to prevent accident or secure business continuity. Therefore, we first define possible crisis at KEPCO Nuclear Fuel (hereinafter KNF) and also make a 'Reaction List' for each crisis situation at the view of information-design. To achieve it, we analyze several country's crisis response manual and then derive component, indicate duties and roles at the information-design point of view. From this, we suggested guideline to make 'Integrated emergency response manual(IERM)'. The manual we used before have following few problems; difficult to applicate at the site, difficult to deliver information. To complement these problems, we searched manual elements from the view of information-design. As a result, we develop administrative manual. Although, this manual could be thought as fragmentary manual because it confined specific several agency/organization and disaster type

  15. Intelligent buildings. Living and working in a high-tech building; Das intelligente Haus. Wohnen und Arbeiten mit zukunftsweisender Technik

    Traenkler, H.R. [Universitaet der Bundeswehr Muenchen (Germany). Inst. fuer Sensoren und Messsysteme; Schneider, F. [Technische Univ. Muenchen (Germany). Lehrstuhl fuer Messsystem- und Sensortechnik

    2001-07-01

    Intelligent buildings (smart home, home automation, intelligent living) are characterised by technical facilities with high comfort, flexible use of rooms, central and decentralised control, communication options, environmental compatibility, low energy cost and low operating cost. This book discusses technologies, components, subsystems and general aspects of smart homes. Sensors and sensor systems are discussed in particular as they are key components. Target groups of the publication are planning authorities, architects and constructional engineers, component producers, suppliers, tradesmen and private builder-owners. [German] Die interdisziplinaere Thematik des Intelligenten Hauses bzw. der Intelligenten Hausinstrumentarisierung (Smart Home, Home Automation, Intelligent Living) gewinnt zunehmend an Interesse. Waehrend die konventionelle Elektroinstallation im privaten Haus seit Jahrzehnten lediglich auf die Verteilung und das Schalten der elektrischen Energie ausgerichtet war, haben sich die Anforderungen an eine moderne Haustechnik hinsichtlich Komfort, Moeglichkeiten flexibler Raumnutzungen, zentraler und dezentraler Steuerungen, Kommunikationsmoeglichkeiten, Umweltvertraeglichkeit sowie Energie- und Betriebskostenminimierung geaendert und erweitert.Das vorliegende Werk behandelt Technologien, Komponenten, Subsysteme und Gesamtsystemaspekte fuer das intelligente Haus. Eine Schluesselrolle nehmen dabei Sensoren und Sensorsysteme ein, da nur solche Informationen verarbeitet werden koennen, die zuverlaessig erfasst worden sind. Neue Anwendungen ermoeglichen die Schaffung von Wohnraum, der den Bewohnern angepasst werden kann (kindgerecht, seniorengerecht), der im Einklang mit der Natur steht (Passivhaus, Nullheizenergiehaus), der vorteilhaft geplant werden kann (Gebaeudegeometrie, Gebaeudeausrichtung, Baumaterial, Landschaftsbezogenheit), der die mitdenkende Haut besitzt (lichtlenkende Fassade, transluzente Waermedaemmung) und der mit selbstregulierenden Systemen

  16. Critical brand innovation factors (CBIF): understanding innovation and market performance in the Chinese high-tech service industry

    Nguyen, Bang; Yu, Xiaoyu; Melewar, T. C.; Gupta, Suraksha

    2016-01-01

    Brand innovation sweeps aside established practices and disrupts the status quo, resulting in the transformation of markets. The present study develops and tests a model of critical brand innovation factors (CBIF) by examining key factors influencing firm-level brands' innovation and increased market performance. Adapting both organizational elements and market response characteristics, the model integrates four key variables in China's industrial service markets: innovation, internationaliza...

  17. From low cost to high tech: possible margins of technical progress in photovoltaic;Du low cost a la high-tech: des marges de progres techniques possibles pour le photovoltaique

    Guillemoles, J.F. [CNRS, directeur adjoint a la Recherche de l' Institut de R and D de l' Energie Photovoltaique (IRDEP), Unite Mixte de Recherche CNRS-EDF-Paristech, 78 - Chatou (France)

    2009-11-15

    Photovoltaic is developing in response to 3 requirements: conservation of the environment, security in energy, and economic growth. Given this, the terawatt (TW) scale should be used to measure the magnitude of energy needs. Can solar, in particular photovoltaic, power meet these needs? This has nothing to do with the availability of solar energy - in a single hour, the sun sends to the earth as much energy as the electricity consumed by all of humanity during an entire year. Instead, it raises questions about the industrial deployment and, eventually, the availability of raw materials and land. The sustainable development of photovoltaic power implies wisely using resources (raw materials, energy and capital) and improving the efficiency not only of the process for transforming resources into photovoltaic units but also of the photovoltaic units themselves for converting light into electricity. It is worth noting that the predictable change of scale in the photovoltaic industry will have implications for this industry's deployment on a large scale. This deployment depends on: the availability of technology, know-how, capital and raw materials; the cost of investments; the speed of implementation; and the rhythm of production of cells. (author)

  18. Development and use of a master health facility list: Haiti's experience during the 2010 earthquake response.

    Rose-Wood, Alyson; Heard, Nathan; Thermidor, Roody; Chan, Jessica; Joseph, Fanor; Lerebours, Gerald; Zugaldia, Antonio; Konkel, Kimberly; Edwards, Michael; Lang, Bill; Torres, Carmen-Rosa

    2014-08-01

    Master health facility lists (MHFLs) are gaining attention as a standards-based means to uniquely identify health facilities and to link facility-level data. The ability to reliably communicate information about specific health facilities can support an array of health system functions, such as routine reporting and emergency response operations. MHFLs support the alignment of donor-supported health information systems with county-owned systems. Recent World Health Organization draft guidance promotes the utility of MHFLs and outlines a process for list development and governance. Although the potential benefits of MHFLs are numerous and may seem obvious, there are few documented cases of MHFL construction and use. The international response to the 2010 Haiti earthquake provides an example of how governments, nongovernmental organizations, and others can collaborate within a framework of standards to build a more complete and accurate list of health facilities. Prior to the earthquake, the Haitian Ministry of Health (Ministère de la Santé Publique et de la Population [MSPP]) maintained a list of public-sector health facilities but lacked information on privately managed facilities. Following the earthquake, the MSPP worked with a multinational group to expand the completeness and accuracy of the list of health facilities, including information on post-quake operational status. This list later proved useful in the response to the cholera epidemic and is now incorporated into the MSPP's routine health information system. Haiti's experience demonstrates the utility of MHFL formation and use in crisis as well as in the routine function of the health information system.

  19. Modern information and telecommunication technologies in educational process as the element of ongoing personnel training for high-tech Russian industry

    Matyatina, A. N.; Isaev, A. A.; Samovarschikov, Y. V.

    2017-01-01

    In the current work the issues of staffing high-tech sectors of Russian industry are considered in the context of global geopolitical instability, the comparative analysis of the age structure of domestic companies with the leading Western industrial organizations was conducted, "growth points" of human resources development were defined. For the purpose of informational and telecommunicational implementation in the educational process the analysis of normative-legal documents regulating the requirements to the electronic educational environment and distance learning technologies is presented. The basic models of distance learning technologies and remote resources as part of teaching materials are used. Taking into account the specifics and requirements of industrial enterprises a number of tools and methodology of e-learning based on the identified needs of the industrial sector were offered. The basis of the proposed model is built on one-parameter model through a three-tier learning: kindergarten - secondary - higher education (professional) where the lifecycle of parameter is a list of the industrial enterprises demands to the educational process.

  20. Beyond and between academia and business: How Austrian biotechnology researchers describe high-tech startup companies as spaces of knowledge production.

    Fochler, Maximilian

    2016-04-01

    Research and innovation policy has invested considerable effort in creating new institutional spaces at the interface of academia and business. High-tech startups founded by academic entrepreneurs have been central to these policy imaginaries. These companies offer researchers new possibilities beyond and between academia and larger industry. However, the field of science and technology studies has thus far shown only limited interest in understanding these companies as spaces of knowledge production. This article analyses how researchers working in small and medium-sized biotechnology companies in Vienna, Austria, describe the cultural characteristics of knowledge production in this particular institutional space. It traces how they relate these characteristics to other institutional spaces they have experienced in their research biographies, such as in academia or larger corporations. It shows that the reasons why researchers decide to work in biotechnology companies and how they organize their work are deeply influenced by their perception of deficiencies in the conditions for epistemic work in contemporary academia and, to a lesser degree, in industry.

  1. NRC Response to an Act or Threat of Terrorism at an NRC-Licensed Facility

    Frank Congel

    2000-01-01

    The mandated response to a threat or act of terrorism at a U.S. Nuclear Regulatory Commission (NRC)-licensed facility was examined through a tabletop exercise in May 2000 and a limited field exercise in August 2000. This paper describes some of the new issues addressed and lessons learned from those exercises

  2. Responsible Adult Culture (RAC): Cognitive and Behavioral Changes at a Community-Based Correctional Facility

    Devlin, Renee S.; Gibbs, John C.

    2010-01-01

    This article examined cognitive and behavioral changes among participants in Responsible Adult Culture (RAC), a cognitive-behavioral (especially, cognitive restructuring) treatment program in use at the Franklin County Community-Based Correctional Facility (CBCF). Participants were adult felony offenders (approximately three-fourths male). A…

  3. 20 CFR 670.220 - Are we responsible for the protection and maintenance of center facilities?

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Are we responsible for the protection and maintenance of center facilities? 670.220 Section 670.220 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR THE JOB CORPS UNDER TITLE I OF THE WORKFORCE INVESTMENT ACT Site Selection...

  4. Medical and radiological aspects of emergency preparedness and response at SevRAO facilities.

    Savkin, M N; Sneve, M K; Grachev, M I; Frolov, G P; Shinkarev, S M; Jaworska, A

    2008-12-01

    Regulatory cooperation between the Norwegian Radiation Protection Authority and the Federal Medical Biological Agency (FMBA) of the Russian Federation has the overall goal of promoting improvements in radiation protection in Northwest Russia. One of the projects in this programme has the objectives to review and improve the existing medical emergency preparedness capabilities at the sites for temporary storage of spent nuclear fuel and radioactive waste. These are operated by SevRAO at Andreeva Bay and in Gremikha village on the Kola Peninsula. The work is also intended to provide a better basis for regulation of emergency response and medical emergency preparedness at similar facilities elsewhere in Russia. The purpose of this paper is to present the main results of that project, implemented by the Burnasyan Federal Medical Biophysical Centre. The first task was an analysis of the regulatory requirements and the current state of preparedness for medical emergency response at the SevRAO facilities. Although Russian regulatory documents are mostly consistent with international recommendations, some distinctions lead to numerical differences in operational intervention criteria under otherwise similar conditions. Radiological threats relating to possible accidents, and related gaps in the regulation of SevRAO facilities, were also identified. As part of the project, a special exercise on emergency medical response on-site at Andreeva Bay was prepared and carried out, and recommendations were proposed after the exercise. Following fruitful dialogue among regulators, designers and operators, special regulatory guidance has been issued by FMBA to account for the specific and unusual features of the SevRAO facilities. Detailed sections relate to the prevention of accidents, and emergency preparedness and response, supplementing the basic Russian regulatory requirements. Overall it is concluded that (a) the provision of medical and sanitary components of emergency

  5. The Fast Flux Test Facility built on safety

    1989-01-01

    No other high-tech industry has grown as fast as the nuclear industry. The information available to the general public has not kept pace with the rapid growth of nuclear data---its growth has outpaced its media image and the safety of nuclear facilities has become a highly debated issue. This book is an attempt to bridge the gap between the high-tech information of the nuclear industry and its understanding by the general public. It explains the three levels of defense at the Fast Flux Test Facility (FFTF) and why these levels provide an acceptable margin to protect the general public and on-site personnel, while achieving FFTF's mission to provide research and development for the US Department of Energy

  6. High Tech in Small Places

    Shah, Nirvi

    2010-01-01

    Across a giant swath of desert and mountain terrain southeast of Tucson, one yellow school bus has been carrying an extra passenger since last fall. Along with dozens of students, the bus rolls through the Vail School District's most far-flung portions equipped with a wireless router. It delivers the Internet to students for as many as three hours…

  7. High Tech Art: Chameleon Glass

    1993-01-01

    Dichroic Glass is a technology wherein extremely thin films of metal are vacuum deposited on a glass surface. The coated glass shields spacecraft instruments from cosmic radiation and protects human vision from unfiltered sunlight in space. Because the coating process allows some wavelengths of light and color to reflect and others to pass through, a chameleon effect is produced. Murray Schwartz, a former aerospace engineer, has based his business KROMA on this NASA optical technology. He produces dichroic stained glass windows, mobiles and jewelry. The technique involves deposition of super thin layers of metal oxides applied one layer at a time in a specific order and thickness for the desired effect. His product line is unique and has been very successful.

  8. Germany, high-tech country

    Anon.

    1997-01-01

    The Nuclear Technology Conference organized annually by the Deutsches Atomforum (DAtF) e.V. and the Kerntechnische Gesellschaft (KTG) e.V. was held in Aachen on May 13-15, 1997. Approximately 1000 participants from seventeen countries met to exchange information with experts from industry, research, science, and politics. Unlike earlier events, this one was not disturbed by demonstrations. DAtF President Dr. Wilfried Steuer welcomed Joachim H. Witt, Chief Executive Officer of the city of Aachen, who expressed words of welcome on behalf of his city at the opening of the plenary day of the conference. Energy policy and global competition were the optics of the address by Dr. Norbert Lammert, Parliamentary Undersecretary of State with the German Federal Ministry of Economics. He advocated grasping the changes offered by expanding global markets by reforming the structures of the energy supply sector. The rank of nuclear power in European research policy was explained by Fabricio Caccia Dominioni as representative of the European Commission. The electricity utilities were represented by Dr. Dietmar Kuhnt, Chief Executive Officer of RWE AG, who spoke about the security of energy investments. A thoughtful analysis of Germany as an industrial location was presented by Professor Dr. Herbert Henzler of McKinsey and Company Inc. The President of the European Nuclear Society (ENS), Ger R. Kuepers, sketched the development of nuclear power in the Netherlands, combining national and European aspects and emphasizing, in particular, the important function of ENS. Uranium enrichment as an European project was subject of the report by Dr. Klaus Messer, Urenco Ltd. The General Manager of Tractabel Energy Engineering and Chairman of Belgatom, Guy Frederic, examined the economic viability of nuclear power, appealing to the audience to reduce capital costs by innovation without detracting from safety. (orig./DG) [de

  9. High Tech for Milady's Makeup

    1985-01-01

    "Elizabeth," a computerized beauty analysis system marketed by Elizabeth Arden, is based upon an ARAC data base search of technologies measuring skin profiles. * "Elizabeth" is no longer commercially available.

  10. From campfire to high tech

    Weiss, B.

    2000-01-01

    Renewable energy resources and energy efficiency have a high position in the austrian energy research activities. Austria is one of the rich forest european countries, where the use of bioenergy is traditional. In the last years, more than two thirds of the energy research fond were dedicated to study the renewable energy resources (between them biomass has an important role) and the energy efficiency. A brief description of what has been done in the field is given. (nevyjel)

  11. Emergency planning and response: An independent safety assessment of Department of Energy nuclear reactor facilities

    Knuth, D.; Boyd, R.

    1981-02-01

    The Department of Energy (DOE) has formed a Nuclear Facilities Personnel Qualification and Training (NFPQT) Committee to assess the implications of the recommendations contained in the President's Commission Report on the Three Mile Island (TMI) Accident (the Kemeny Commission report) that are applicable to DOE's nuclear reactor operations. Thirteen DOE nuclear reactors have been reviewed. The assessments of the 13 facilities are based on information provided by the individual operator organizations and/or cognizant DOE Field Offices. Additional clarifying information was supplied in some, but not all, instances. This report indicates how these 13 reactor facilities measure up in light of the Kemeny and other TMI-related studies and recommendations, particularly those that have resulted in upgraded Nuclear Regulatory Commission (NRC) requirements in the area of emergency planning and response

  12. Understanding transferable supply chain lessons and practices to a "high-tech" industry using guidelines from a primary sector industry: a case study in the food industry supply chain.

    Coronado Mondragon, Adrian E; Coronado Mondragon, Christian E; Coronado, Etienne S

    2015-01-01

    Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a "high-tech" industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a "high-tech" industry such as composite materials would be to review supply chain lessons and practices in "low-tech" industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived "low-tech" industry that can be used to provide guidelines in the design of the supply chain of a "high-tech" industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a "low-tech" industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry.

  13. Aligning Responsible Business Practices

    Weller, Angeli E.

    2017-01-01

    This article offers an in-depth case study of a global high tech manufacturer that aligned its ethics and compliance, corporate social responsibility, and sustainability practices. Few large companies organize their responsible business practices this way, despite conceptual relevance and calls t...... and managers interested in understanding how responsible business practices may be collectively organized.......This article offers an in-depth case study of a global high tech manufacturer that aligned its ethics and compliance, corporate social responsibility, and sustainability practices. Few large companies organize their responsible business practices this way, despite conceptual relevance and calls...... to manage them comprehensively. A communities of practice theoretical lens suggests that intentional effort would be needed to bridge meaning between the relevant managers and practices in order to achieve alignment. The findings call attention to the important role played by employees who broker...

  14. Opportunities for Automated Demand Response in Wastewater Treatment Facilities in California - Southeast Water Pollution Control Plant Case Study

    Olsen, Daniel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Goli, Sasank [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Faulkner, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McKane, Aimee [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-12-20

    This report details a study into the demand response potential of a large wastewater treatment facility in San Francisco. Previous research had identified wastewater treatment facilities as good candidates for demand response and automated demand response, and this study was conducted to investigate facility attributes that are conducive to demand response or which hinder its implementation. One years' worth of operational data were collected from the facility's control system, submetered process equipment, utility electricity demand records, and governmental weather stations. These data were analyzed to determine factors which affected facility power demand and demand response capabilities The average baseline demand at the Southeast facility was approximately 4 MW. During the rainy season (October-March) the facility treated 40% more wastewater than the dry season, but demand only increased by 4%. Submetering of the facility's lift pumps and centrifuges predicted load shifts capabilities of 154 kW and 86 kW, respectively, with large lift pump shifts in the rainy season. Analysis of demand data during maintenance events confirmed the magnitude of these possible load shifts, and indicated other areas of the facility with demand response potential. Load sheds were seen to be possible by shutting down a portion of the facility's aeration trains (average shed of 132 kW). Load shifts were seen to be possible by shifting operation of centrifuges, the gravity belt thickener, lift pumps, and external pump stations These load shifts were made possible by the storage capabilities of the facility and of the city's sewer system. Large load reductions (an average of 2,065 kW) were seen from operating the cogeneration unit, but normal practice is continuous operation, precluding its use for demand response. The study also identified potential demand response opportunities that warrant further study: modulating variable-demand aeration loads, shifting

  15. Prediction analysis of dose equivalent responses of neutron dosemeters used at a MOX fuel facility

    Tsujimura, N.; Yoshida, T.; Takada, C.

    2011-01-01

    To predict how accurately neutron dosemeters can measure the neutron dose equivalent (rate) in MOX fuel fabrication facility work environments, the dose equivalent responses of neutron dosemeters were calculated by the spectral folding method. The dosemeters selected included two types of personal dosemeter, namely a thermoluminescent albedo neutron dosemeter and an electronic neutron dosemeter, three moderator-based neutron survey meters, and one special instrument called an H p (10) monitor. The calculations revealed the energy dependences of the responses expected within the entire range of neutron spectral variations observed in neutron fields at workplaces. (authors)

  16. Time response characteristics of X-ray detector system on Silex-Ⅰ laser facility

    Yi Rongqing; He Xiao'an; Li Hang; Du Huabing; Zhang Haiying; Cao Zhurong

    2013-01-01

    On the Silex-Ⅰ laser facility, the time response characteristics of XRD detector were studied. A laser with a pulse of 32 fs and a wavelength of 800 nm was used to irradiate a plane Au target. X-ray calibrated method of time of exposure X-ray framing camera and time resolution of X-ray streak camera was explored. The time response characteristics of XRD detector and time process of X-ray emission were obtained from experiment. We obtained X-ray calibration method of time of exposure X-ray framing camera and time resolution of X-ray streak camera. (authors)

  17. Call for information on coastal energy facility siting: an analysis of responses

    Anon.

    1977-01-01

    The Call for Information issued by the New Jersey Department of Environmental Protection in December 1975 consisted of an eight page questionnaire which was sent to industries, government agencies, and private organizations. Its objective was to seek the help of these groups in plans for the siting of energy facilities in the coastal zone. Potential development of oil and gas from the Baltimore Canyon region adjacent to New Jersey has made planning for energy facilities a priority issue both at the state and federal level. The Call for Information invited government and the energy industry to submit (a) suggested criteria for locating energy and energy-related facilities within the New Jersey coastal zone, (b) analyses by governmental and private agencies or groups of the need to locate energy facilities in specific sites within New Jersey's coastal zone, or in generalized portions thereof, and (c) identification of the land-use parameters, appropriate to the various types of facilities which may be proposed, now or later, for coastal siting. The findings obtained from the draft call and the final call issued seven months later are presented. The results of the industries' responses show that the electric and gas utilities gave some useful information while this was true of only a few of the oil companies. The reluctance to give informatign was perhaps aggravated by lack of clear state and federal policies. The appendices illustrate specific information on manpower, cost and facility requirements to develop oil refineries, establish a gas processing plant as well as information from the US Coast Guard and the Environmental Protection Agency. There is also a listing of the companies that bid in the August 1976 lease sale indicating which bids were accepted, a map of the offshore tracts, and a list of which companies responded to the Call for Information

  18. Evaluation of energy response of neutron rem monitor applied to high-energy accelerator facilities

    Nakane, Yoshihiro; Harada, Yasunori; Sakamoto, Yukio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment] [and others

    2003-03-01

    A neutron rem monitor was newly developed for applying to the high-intensity proton accelerator facility (J-PARC) that is under construction as a joint project between the Japan Atomic Energy Research Institute and the High Energy Accelerator Research Organization. To measure the dose rate accurately for wide energy range of neutrons from thermal to high-energy region, the neutron rem monitor was fabricated by adding a lead breeder layer to a conventional neutron rem monitor. The energy response of the monitor was evaluated by using neutron transport calculations for the energy range from thermal to 150 MeV. For verifying the results, the response was measured at neutron fields for the energy range from thermal to 65 MeV. The comparisons between the energy response and dose conversion coefficients show that the newly developed neutron rem monitor has a good performance in energy response up to 150 MeV, suggesting that the present study offered prospects of a practical fabrication of the rem monitor applicable to the high intensity proton accelerator facility. (author)

  19. Oil spill response planning, training and facilities for wildlife in Prince William Sound, Alaska

    Hillman, S.O.

    1996-01-01

    The special provisions of the SERVS System of the Alyeska Pipeline Service Company concerning the treatment of wildlife in the event of an oil spill, were described. The Company is prepared to mobilize a rapid response for protection and treatment of wildlife in the event of an oil spill anywhere along the trans-Alaska pipeline or in Prince William Sound. Equipment for hazing, capture, and treatment is pre-assembled and staged at facilities at the Valdez Marine Terminal. Veterinarians and wildlife treatment specialists are under contract for treating oiled birds. This complex of wildlife response capabilities meets or exceeds the guidelines and response planning standards set by wildlife agencies. 7 refs., 6 figs

  20. Facile preparation of pH-responsive polyurethane nanocarrier for oral delivery

    Nabid, Mohammad Reza, E-mail: M-nabid@sbu.ac.ir; Omrani, Ismail

    2016-12-01

    This study reports a novel one pot synthesis of pH-responsive nanocarrier for oral delivery of hydrophobic drug under gastrointestinal tract. Triblock copolymer MPEG-HTPB-MPEG was synthesized coupling of MPEG and HTPB using hexamethylene diisocyanate(HDI) and pH-responsive carboxylic acid group was attached to polybuthadiene backbone by thiol-ene click reaction in a facile and convenient procedure. The MPEG-HTPB (g-COOH)-MPEG block copolymers were self-organized into micelle assemblies in the water. The size and shape of the micelle assemblies were confirmed by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The nanocarriers have high drug loading ability for poorly water-soluble drug. The pH-responsive profile was demonstrated by pH-dependent swelling and in vitro drug release. < 10.0% IBU was released under artificial gastric fluid after 2 h, whereas an immediate release was observed under artificial intestinal fluid. The XTT assay indicated that the micelle obtained from PEG-HTPB (g-COOH)-PEG triblock copolymer are safe in a wide range of concentrations. The results show that pH-responsive PEG-HTPB (g-COOH)-PEG triblock copolymers are promising nanocarriers for the oral administration of hydrophobic drugs. - Highlights: • A facile method for synthesis of pH-responsive nanocarriers was developed. • pH-responsive amphiphilic polymer was synthesized using a rapid and one-pot procedure. • The nanocarriers have high drug loading ability for poorly water-soluble drug. • The nanocarriers show pH-dependent release profile. • The nanocarriers were stable in the gastric fluid and ruptured to release the loaded drug in intestinal fluid.

  1. Facile preparation of pH-responsive polyurethane nanocarrier for oral delivery

    Nabid, Mohammad Reza; Omrani, Ismail

    2016-01-01

    This study reports a novel one pot synthesis of pH-responsive nanocarrier for oral delivery of hydrophobic drug under gastrointestinal tract. Triblock copolymer MPEG-HTPB-MPEG was synthesized coupling of MPEG and HTPB using hexamethylene diisocyanate(HDI) and pH-responsive carboxylic acid group was attached to polybuthadiene backbone by thiol-ene click reaction in a facile and convenient procedure. The MPEG-HTPB (g-COOH)-MPEG block copolymers were self-organized into micelle assemblies in the water. The size and shape of the micelle assemblies were confirmed by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The nanocarriers have high drug loading ability for poorly water-soluble drug. The pH-responsive profile was demonstrated by pH-dependent swelling and in vitro drug release. < 10.0% IBU was released under artificial gastric fluid after 2 h, whereas an immediate release was observed under artificial intestinal fluid. The XTT assay indicated that the micelle obtained from PEG-HTPB (g-COOH)-PEG triblock copolymer are safe in a wide range of concentrations. The results show that pH-responsive PEG-HTPB (g-COOH)-PEG triblock copolymers are promising nanocarriers for the oral administration of hydrophobic drugs. - Highlights: • A facile method for synthesis of pH-responsive nanocarriers was developed. • pH-responsive amphiphilic polymer was synthesized using a rapid and one-pot procedure. • The nanocarriers have high drug loading ability for poorly water-soluble drug. • The nanocarriers show pH-dependent release profile. • The nanocarriers were stable in the gastric fluid and ruptured to release the loaded drug in intestinal fluid.

  2. Full scale BWR containment LOCA response test at the INKA test facility

    Wagner, Thomas; Leyer, Stephan

    2015-01-01

    KERENA is an innovative boiling water reactor concept with passive safety systems (Generation III+) of AREVA. The reactor is an evolutionary design of operating BWRs (Generation II). In order to verify the functionality and performance of the KERENA safety concept required for the transient and accident management, the test facility “Integral Teststand Karlstein” (INKA) was built at Karlstein (Germany). It is a mock-up of the KERENA boiling water reactor containment, with integrated pressure suppression system. The complete chain of passive safety components is available. The passive components and the levels are represented in full scale. The volume scaling of the containment compartments is approximately 1:24. The reactor pressure vessel (RPV) is simulated via the steam accumulator of the Karlstein Large Valve Test Facility. This vessel provides an energy storage capacity of approximately 1/6 of the KERENA RPV and is supplied by a Benson boiler with a thermal power of 22 MW. With respect to the available power supply, the containment- and system-sizing of the facility is by far the largest one of its kind worldwide. From 2009 to 2012, several single component tests were conducted (Emergency Condenser, Containment Cooling Condenser, Core Flooding System etc.). On March 21st, 2013, the worldwide first large-scale only passively managed integral accident test of a boiling water reactor was simulated at INKA. The integral test measured the combined response of the KERENA passive safety systems to the postulated initiating event was the “Main Steam Line Break” (MSLB) inside the Containment with decay heat simulation. The results of the performed integral test (MSLB) showed that the passive safety systems alone are capable to bring the plant to stable conditions meeting all required safety targets with sufficient margins. Therefore the test verified the function of those components and the interplay between them as response to an anticipated accident scenario

  3. Emergency preparedness and response to 'Not-in-a-Facility' radiological accidents

    Grlicarev, Igor

    2008-01-01

    The paper provides an overview of lessons learned from the past radiological accidents, which have not occurred in an operating facility, i.e. 'not-in-a-facility' radiological emergencies. A method to analyze status of prevention of accidents is proposed taking into account the experiences and findings from the past events. The main emergency planning items are discussed, which would render effective response in case of such emergencies. Although the IAEA has published many documents about establishing an adequate emergency response capability, it is not an easy task to bring these recommendations into life. This paper gives some hints how to overcome the most obvious difficulties while users of these documents trying to adapt the guidance to their own needs. The special cases of alpha emitters and radiological dispersal devices were considered separately. The balanced approach to emergency response is promoted throughout the text, which means that a level of preparedness should be commensurate to the threat and the existing resources should be used to the extent possible. (author)

  4. Model tracking system for low-level radioactive waste disposal facilities: License application interrogatories and responses

    Benbennick, M.E.; Broton, M.S.; Fuoto, J.S.; Novgrod, R.L.

    1994-08-01

    This report describes a model tracking system for a low-level radioactive waste (LLW) disposal facility license application. In particular, the model tracks interrogatories (questions, requests for information, comments) and responses. A set of requirements and desired features for the model tracking system was developed, including required structure and computer screens. Nine tracking systems were then reviewed against the model system requirements and only two were found to meet all requirements. Using Kepner-Tregoe decision analysis, a model tracking system was selected.

  5. Model tracking system for low-level radioactive waste disposal facilities: License application interrogatories and responses

    Benbennick, M.E.; Broton, M.S.; Fuoto, J.S.; Novgrod, R.L.

    1994-08-01

    This report describes a model tracking system for a low-level radioactive waste (LLW) disposal facility license application. In particular, the model tracks interrogatories (questions, requests for information, comments) and responses. A set of requirements and desired features for the model tracking system was developed, including required structure and computer screens. Nine tracking systems were then reviewed against the model system requirements and only two were found to meet all requirements. Using Kepner-Tregoe decision analysis, a model tracking system was selected

  6. Experiences in the development of an emergency response facility (ERF) system for a nuclear power plant

    Seisdedos, A.; Sanchez-Fornie, M.A.

    1985-01-01

    The TMI-2 accident gave rise to a series of new requirements with which Nuclear Power Plants must comply and amongst which the implementation of emergency response facilities, particularly the SPDS, has received special attention. This paper covers the experience and problems encountered in the developing of the engineering necessary for the detailed definition of the ERF in a Nuclear Power Plant in the commercial operation phase. Also, a real example is provided for the case of a plant in the last phase of construction and installation. This will serve to illustrate each of the topics covered. (author)

  7. Design of the Caltrans Seismic Response Modification Device (SRMD) test facility

    Benzoni, G.; Seible, F.

    1998-01-01

    In the Seismic retrofit design of California's Toll Bridges, seismic isolation is used in several bridges to limit the seismic force input into the superstructure and to avoid costly superstructure retrofit measures which would require partial lane closures and traffic interruptions. Isolation bearings and dampers of the size required for these large span bridges have not been built or tested to date. This paper describes the design and construction of a full scale testing facility which will allow the real-time 6-DOF dynamic characterization of the seismic response modification devices designed for California's Toll Bridges. (author)

  8. Active seismic response control systems for nuclear power plant equipment facilities

    Kobori, Takuji; Kanayama, Hiroo; Kamagata, Shuichi

    1989-01-01

    To sustain severe earthquake ground motion, a new type of anti-seismic structure is proposed, called a Dynamic Intelligent Building (DIB) system, which is positioned as an active seismic response controlled the structure. The structural concept starts from a new recognition of earthquake ground motion, and the structural natural frequency is actively adjusted to avoid resonant vibration, and similarly the external counter-force cancels the resonant force which comes from the dynamic structural motion energy. These concepts are verified using an analytical simulator program. The advanced application of the DIB system, is the Active Supporting system and the Active Stabilizer system for nuclear power plant equipment facilities. (orig.)

  9. The One Plan Project: A cooperative effort of the National Response Team and the Region 6 Regional Response Team to simplify facility emergency response planning

    Staves, J.; McCormick, K.

    1997-01-01

    The National Response Team (NRT) in coordination with the Region 6 Response Team (RRT) have developed a facility contingency plan format which would integrate all existing regulatory requirements for contingency planning. This format was developed by a multi-agency team, chaired by the USEPA Region 6, in conjunction with various industry, labor, and public interest groups. The impetus for this project came through the USEPA Office of Chemical Emergency Preparedness and Prevention (CEPPO). The current national oil and hazardous material emergency preparedness and response system is an amalgam of federal, state, local, and industrial programs which are often poorly coordinated. In a cooperative effort with the NRT, the CEPPO conducted a Presidential Review of federal agency authorities and coordination responsibilities regarding release prevention, mitigation, and response. Review recommendations led to a Pilot Project in USEPA Region 6. The Region 6 Pilot Project targeted end users in the intensely industrialized Houston Ship Channel (HSC) area, which is comprised of petroleum and petrochemical companies

  10. XIII International science and technology conference High-tech chemical technologies-2010 with elements of Scientific school for young people Innovations in chemistry: achievements and prospects. Summaries of reports

    2010-01-01

    Materials of the XIII International science and technology conference High-tech chemical technologies-2010 with elements of Scientific school for young people Innovations in chemistry: achievements and prospects (29 June-2 July 2010, Ivanovo) are presented. During the conference the following areas: theoretical aspects of chemical technology; technology of deep oil refining and the production of organic substances; technology of drugs and biologically active substances; technology of inorganic materials, polymers and composites based on them - the technological principles and methods of synthesis, modification, and processing; environmental and economic problems of chemical technologies and their solutions are considered [ru

  11. Opportunities for Energy Efficiency and Open Automated Demand Response in Wastewater Treatment Facilities in California -- Phase I Report

    Lekov, Alex; Thompson, Lisa; McKane, Aimee; Song, Katherine; Piette, Mary Ann

    2009-04-01

    This report summarizes the Lawrence Berkeley National Laboratory?s research to date in characterizing energy efficiency and automated demand response opportunities for wastewater treatment facilities in California. The report describes the characteristics of wastewater treatment facilities, the nature of the wastewater stream, energy use and demand, as well as details of the wastewater treatment process. It also discusses control systems and energy efficiency and automated demand response opportunities. In addition, several energy efficiency and load management case studies are provided for wastewater treatment facilities.This study shows that wastewater treatment facilities can be excellent candidates for open automated demand response and that facilities which have implemented energy efficiency measures and have centralized control systems are well-suited to shift or shed electrical loads in response to financial incentives, utility bill savings, and/or opportunities to enhance reliability of service. Control technologies installed for energy efficiency and load management purposes can often be adapted for automated demand response at little additional cost. These improved controls may prepare facilities to be more receptive to open automated demand response due to both increased confidence in the opportunities for controlling energy cost/use and access to the real-time data.

  12. X-ray transport and radiation response assessment (XTRRA) experiments at the National Ignition Facility

    Fournier, K. B., E-mail: fournier2@llnl.gov; Brown, C. G.; Yeoman, M. F.; Compton, S.; Holdener, F. R.; Kemp, G. E.; Blue, B. E. [Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, California 94551 (United States); Fisher, J. H.; Newlander, C. D.; Gilliam, R. P.; Froula, N. [Fifth Gait Technologies, Inc., 14040 Camden Circle, Huntsville, Alabama 35803 (United States); Seiler, S. W.; Davis, J. F.; Lerch, MAJ. A. [Defense Threat Reduction Agency, 8725 John J. Kingman Road, Fort Belvoir, Virginia 22060-6201 (United States); Hinshelwood, D. [Naval Research Laboratory, 4555 Overlook Ave. SW, Washington, DC 20375 (United States); Lilly, M. [Dynasen, Inc., 20 Arnold Pl., Goleta, California 93117 (United States)

    2016-11-15

    Our team has developed an experimental platform to evaluate the x-ray-generated stress and impulse in materials. Experimental activities include x-ray source development, design of the sample mounting hardware and sensors interfaced to the National Ignition Facility’s diagnostics insertion system, and system integration into the facility. This paper focuses on the X-ray Transport and Radiation Response Assessment (XTRRA) test cassettes built for these experiments. The test cassette is designed to position six samples at three predetermined distances from the source, each known to within ±1% accuracy. Built-in calorimeters give in situ measurements of the x-ray environment along the sample lines of sight. The measured accuracy of sample responses as well as planned modifications to the XTRRA cassette is discussed.

  13. Real-time monitoring/emergency response modeling workstation for a tritium facility

    Lawver, B.S.; Sims, J.M.; Baskett, R.L.

    1993-01-01

    At Lawrence Livermore National Laboratory (LLNL) we have developed a real-time system to monitor two stacks on our tritium handling facility. The monitors transmit the stack data to a workstation, which computes a three-dimensional numerical model of atmospheric dispersion. The workstation also collects surface and upper air data from meteorological towers and a sodar. The complex meteorological and terrain setting in the Livermore Valley demands more sophisticated resolution of the three-dimensional structure of the atmosphere to reliably calculate plume dispersion than afforded by Gaussian models. We experience both mountain valley and sea breeze flows. To address these complexities, we have implemented the three-dimensional diagnostic MATHEW mass-adjusted wind field and ADPIC particle-in-cell dispersion models on the workstation for use in real-time emergency response modeling. Both MATHEW and ADPIC have shown their utility in a variety of complex settings over the last 15 yr within the U.S. Department of Energy's Atmospheric Release Advisory Capability (ARAC) project. Faster workstations and real-time instruments allow utilization of more complex three-dimensional models, which provides a foundation for building a real-time monitoring and emergency response workstation for a tritium facility. The stack monitors are two ion chambers per stack

  14. The Research on the Pre-sale Crowdfunding Decision of the Growth High-tech Enterprises' StartupsProducts%成长期高科技企业新创产品预售众筹的决策研究

    白江涛; 许长延

    2017-01-01

    针对高科技产品的预售众筹模式展开研究,在对高技术企业的技术经济特征分析基础上,论证预售众筹模式的有效性;通过构建理论和数学模型来描述高科技产品的预售众筹机理,并对最优预售规模进行测算;基于对预售众筹成功案例的解读,为成长期高新技术企业预售众筹决策提供参考建议.%The study focuses on award mechanism of product crowdfunding and diagnoses the decision-making effect of enterprise management.By building theoretical and mathematical models,the paperdescribes the pre-sale crowdfunding mechanism of high-tech products.This paper tries to calculate the optimal pre-sale scale.Based on the interpretation of the successful cases of pre-sale crowd funding,the paper finds some conclusions,which provide some suggestions for enlightening and guiding the long-term high and new technology enterprises to launch the pre-sale crowd funding.These conclusions have enlightenment and guidance for high-tech enterprises to make decision of the pre-sale crowdfunding in growth period.

  15. Effectiveness of a physical activity program on weight, physical fitness, occupational stress, job satisfaction and quality of life of overweight employees in high-tech industries: a randomized controlled study.

    Fang, Yun-Ya; Huang, Chien-Yuan; Hsu, Mei-Chi

    2018-03-27

    This study aimed to examine the effectiveness of a physical activity (PA) program on weight control, physical fitness, occupational stress, job satisfaction and quality of life of overweight and sedentary employees in high-tech industries. Participants in the intervention group (n = 37) were instructed to carry out a PA program at moderate intensity for 60 min/session, 3 sessions/week for 12 weeks. Those in the control group (n = 38) received no PA program and were asked to continue their routine lifestyle. Evaluations were performed at baseline and at the end of the intervention. Results of structured questionnaires and blood biochemistry tests and evaluations of physical fitness were analyzed. The PA program effectively reduced the number of risk factors for metabolic syndrome and body fat percentage, and improved physical fitness such as flexibility, muscular strength and endurance and cardiorespiratory endurance. The intervention also significantly decreased levels of serum triglyceride, total cholesterol and low-density lipoprotein cholesterol. Significant positive effects on work control, interpersonal relationships at work, global job satisfaction and quality of life were also demonstrated. This study showed that a PA program can be helpful in improving physical, physiological and psychological outcomes for overweight and sedentary employees in high-tech industries.

  16. R and D strategy on remote response technology for emergency situations of nuclear facilities in KAERI

    Jeong, Kyung Min; Cho, Jae Wan; Choi, Young Soo; Eom, Heung Seup; Seo, Yong Chil; Shin, Hoch Ul; Lee, Sung Uk; Kim, Chang Hoi; Jeong, Seung Ho; Kim, Seung Ho

    2012-01-01

    Generally speaking, robotic technologies are anticipated to be very useful for hazardous works in nuclear facilities because robotic systems are relatively immune to radiation exposure. But the application of robotic systems for such environments has not been increasing during past 20 years. Applying highly reliable and conservative 'defense in depth' concepts in the design and construction of NPPs, there is very little probability of accidents occurring or radioactive materials being released into the environments. As a precaution, however NPPs are prepared with emergency response procedures and routinely conduct exercises for post accident circumstances based on these procedures. The last year's accident at the Fukushima Daiichi nuclear power plant promotes the needs for remote response technologies based on mobile robotic system to recognize the internal status and mitigate the unanticipated events of nuclear power plants in emergency situations. For initial observation of reactor buildings two robots named 'PackBot' were used because the internal conditions were unknown so as to allow human workers for entrance into the reactor building. But there were severe limitations for the robots to perform the given tasks from various obstacles and poor visibility inside though they provided crucial information such as views of internal structures, dose level and temperature that supported the decision for human worker's entrance. The application of robots for emergency response tasks for post accidents in nuclear facilities is not a new concept. Robots were sent to recover the damaged reactor at Chernobyl where human workers could have received a lifetime dose of radiation in minutes. Based on NRC's TMI 2 Cleanup Program, several robots were built in the 1980s to help gather information and remove debris from a reactor at the Three Mile Island nuclear power plant that partially melted down in 1979. A robot was used for several years equipped with various tools allowing

  17. R and D strategy on remote response technology for emergency situations of nuclear facilities in KAERI

    Jeong, Kyung Min; Cho, Jae Wan; Choi, Young Soo; Eom, Heung Seup; Seo, Yong Chil; Shin, Hoch Ul; Lee, Sung Uk; Kim, Chang Hoi; Jeong, Seung Ho; Kim, Seung Ho [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    Generally speaking, robotic technologies are anticipated to be very useful for hazardous works in nuclear facilities because robotic systems are relatively immune to radiation exposure. But the application of robotic systems for such environments has not been increasing during past 20 years. Applying highly reliable and conservative 'defense in depth' concepts in the design and construction of NPPs, there is very little probability of accidents occurring or radioactive materials being released into the environments. As a precaution, however NPPs are prepared with emergency response procedures and routinely conduct exercises for post accident circumstances based on these procedures. The last year's accident at the Fukushima Daiichi nuclear power plant promotes the needs for remote response technologies based on mobile robotic system to recognize the internal status and mitigate the unanticipated events of nuclear power plants in emergency situations. For initial observation of reactor buildings two robots named 'PackBot' were used because the internal conditions were unknown so as to allow human workers for entrance into the reactor building. But there were severe limitations for the robots to perform the given tasks from various obstacles and poor visibility inside though they provided crucial information such as views of internal structures, dose level and temperature that supported the decision for human worker's entrance. The application of robots for emergency response tasks for post accidents in nuclear facilities is not a new concept. Robots were sent to recover the damaged reactor at Chernobyl where human workers could have received a lifetime dose of radiation in minutes. Based on NRC's TMI 2 Cleanup Program, several robots were built in the 1980s to help gather information and remove debris from a reactor at the Three Mile Island nuclear power plant that partially melted down in 1979. A robot was used for several years

  18. Hydrazine blending and storage facility, interim response action, draft implementation document for rinsewater transfer, phase 2

    1991-08-09

    This Draft Implementation Document (ID) for Rinsewater Transfer has been prepared as a requirement for conducting and completing the Interim Response Action (IRA) at the Hydrazine Blending and Storage Facility (HBSF) located at Rocky Mountain Arsenal (RMA) in Commerce City, Colorado. This document has been prepared in accordance with requirements set forth in the October 1988 Final Decision Document for the HBSF IRA (Peer, 1988) and the Amendment to the Final Decision Document (HLA, 1991). The HBSF IRA task was separated into two phases that comprise complete decommissioning of the HBSF as cited in the Federal Facility Agreement. The design portion of Phase I of the HBSF IRA included analytical methods development and laboratory certification for analysis of hydrazine fuel compounds (hydrazine, monomethyl hydrazine) (MMH), and unsymmetrical dimethyl hydrazine (UDMH) and n-nitrosodimethylamine (NDMA) in HBSF rinsewater, chemical characterization of hydrazine rinsewater, bench- and pilot-scale testing of ultraviolet (UV) light/chemical oxidation treatment systems for treatment of hydrazine rinsewater, full-scale startup testing of a UV light/chemical oxidation treatment system, and air monitoring during startup testing as described in the Draft Final Treatment Report (HLA, 1991).

  19. [The social responsibility report drafting in healthcare facilities. Experiences in Fatebenefratelli's Hospitals].

    Roberti, Giovanni; Franco, Claudia; Pimpinella, Giovanni; Piscioneri, Patrizia; Primavera, Angela; Bonannini, Barbara; Calvo, Manlio; Pavese, Ida; Di Palma, Mario; Fiore, Rosalia

    2013-01-01

    Medical facilities have the duty to report, in a transparent, comprehensive and integrated manner, their performance, not only in relation to the services provided directly but also in relation to the interest of the various stakeholders and the economic and social benefits for the community. The Social Report is not only a communication tool related to corporate social responsibility but also the initial basis for acquiring social legitimacy, and serves the role of "social accounting" of the activities of an organization, with respect to its mission and institutional role. In healthcare, it can contribute to achieving the fundamental objectives of the healthcare system, in the financial area (fair financing), and also in the medical (outcomes) and ethical-social areas.

  20. Neutron scattering facility for the calibration of the response to nuclear recoils

    Jochum, J.; Feilitzsch, F. von; Huber, M.; Jagemann, T.; Lachenmaier, T.; Lanfranchi, J.-C.; Potzel, W.; Ruedig, A.; Schnagl, J.; Stark, M.; Wulandari, H.; Chambon, B.; Drain, D.; Gascon, J.; Jesus, M. de; Martineau, O.; Simon, E.; Stern, M.

    2002-01-01

    A possibility to search for elementary particles as dark matter candidates is to detect elastic scattering with cryogenic detectors. For the interpretation of the data one has to determine the detector response to nuclear recoils, the so-called quenching factors. They can differ for the heat-, for the scintillation- and for the ionization-signal and can be measured by scattering of neutrons. The CRESST- and the EDELWEISS-collaborations have set up a neutron scattering facility for cryogenic detectors at the tandem-accelerator of the Munich 'Maier-Leibniz-Labor.' The scattering angle and the time-of-flight of the neutrons are measured by an array of liquid scintillator cells. The pulsed high energy (11 MeV) neutron beam is created by nuclear reaction of a 11 B on a H 2 -gas target. The set-up and the results of first tests are presented

  1. Preliminary studies of tunnel interface response modeling using test data from underground storage facilities.

    Sobolik, Steven Ronald; Bartel, Lewis Clark

    2010-11-01

    In attempting to detect and map out underground facilities, whether they be large-scale hardened deeply-buried targets (HDBT's) or small-scale tunnels for clandestine border or perimeter crossing, seismic imaging using reflections from the tunnel interface has been seen as one of the better ways to both detect and delineate tunnels from the surface. The large seismic impedance contrast at the tunnel/rock boundary should provide a strong, distinguishable seismic response, but in practice, such strong indicators are often lacking. One explanation for the lack of a good seismic reflection at such a strong contrast boundary is that the damage caused by the tunneling itself creates a zone of altered seismic properties that significantly changes the nature of this boundary. This report examines existing geomechanical data that define the extent of an excavation damage zone around underground tunnels, and the potential impact on rock properties such as P-wave and S-wave velocities. The data presented from this report are associated with sites used for the development of underground repositories for the disposal of radioactive waste; these sites have been excavated in volcanic tuff (Yucca Mountain) and granite (HRL in Sweden, URL in Canada). Using the data from Yucca Mountain, a numerical simulation effort was undertaken to evaluate the effects of the damage zone on seismic responses. Calculations were performed using the parallelized version of the time-domain finitedifference seismic wave propagation code developed in the Geophysics Department at Sandia National Laboratories. From these numerical simulations, the damage zone does not have a significant effect upon the tunnel response, either for a purely elastic case or an anelastic case. However, what was discovered is that the largest responses are not true reflections, but rather reradiated Stoneley waves generated as the air/earth interface of the tunnel. Because of this, data processed in the usual way may not

  2. (Some) Present and planned facilities for the R&D support of MYRRHA

    Schuurmans, Paul

    2013-01-01

    MYRRHA (Multipurpose hYbrid Research Reactor for High-tech Applications) - Accelerator Driven System is a flexible fast spectrum irradiation facility able to operate in sub-critical and critical mode for material and fuel developments for GEN IV and fusion reactors and in a back-up role for radioisotopes production. Some presented topics: • Structural Materials; • Advanced Fuel; • Thermal-hydraulics; • Reactor components; • Instrumentation; • Coolant chemistry control; • Operational control & Neutronics

  3. Dual axis radiographic hydrodynamic test facility. Final environmental impact statement, Volume 2: Public comments and responses

    NONE

    1995-08-01

    On May 12, 1995, the U.S. Department of Energy (DOE) issued the draft Dual Axis Radiographic Hydrodynamic Test Facility Environmental Impact Statement (DARHT EIS) for review by the State of New Mexico, Indian Tribes, local governments, other Federal agencies, and the general public. DOE invited comments on the accuracy and adequacy of the draft EIS and any other matters pertaining to their environmental reviews. The formal comment period ran for 45 days, to June 26, 1995, although DOE indicated that late comments would be considered to the extent possible. As part of the public comment process, DOE held two public hearings in Los Alamos and Santa Fe, New Mexico, on May 31 and June 1, 1995. In addition, DOE made the draft classified supplement to the DARHT EIS available for review by appropriately cleared individuals with a need to know the classified information. Reviewers of the classified material included the State of New Mexico, the U.S. Environmental Protection Agency, the Department of Defense, and certain Indian Tribes. Volume 2 of the final DARHT EIS contains three chapters. Chapter 1 includes a collective summary of the comments received and DOE`s response. Chapter 2 contains the full text of the public comments on the draft DARHT EIS received by DOE. Chapter 3 contains DOE`s responses to the public comments and an indication as to how the comments were considered in the final EIS.

  4. Experiences in planning and response for the radiological emergencies in a radioactive facility

    Amador B, Z.H.; Perez P, S.; Torres B, M.B.; Ayra P, F.E.

    2006-01-01

    It is internationally recognized the importance of the planning and the assurance for the effective response to the radiological emergencies. In the work those experiences on this thematic one in the Isotopes Center (CENTIS), the radioactive facility where the biggest radioactive inventory is manipulated in Cuba are presented. Due to CENTIS is also the sender and main transport of radioactive materials, it is included this practice. The revision of the abnormal situations during the years 1997 at the 2005, starting from the classification adopted by the Regulatory Authority of the country is carried out. Its are register the details of these occurrences in the Radiological Events Database (BDSR). A correspondence among the radiological impact evaluated in the Emergency Plan for the possible events and that of the registered ones is obtained. The complete training programs and realization of the exercises are carried out. Those results of 3 mockeries made to full scale are picked up. It was concluded that the operational experience and the maintained infrastructure, determine the answer capacity for radiological emergencies in the CENTIS. (Author)

  5. Analysis for seismic response of dry storage facility for spent fuel

    Ko, Y.-Y.; Hsu, S.-Y.; Chen, C.-H.

    2009-01-01

    Most of the dry storage systems for spent fuel are freestanding, which leads to stability concerns in an earthquake. In this study, as a safety check, the ABAQUS/Explicit code is adopted to analyse the seismic response of the dry storage facility planned to be installed at Nuclear Power Plant no. 1 (NPP1) in Taiwan. A 3D coupled finite element (FE) model was established, which consisted of a freestanding cask, a concrete pad, and underneath soils interacting with frictional contact interfaces. The scenario earthquake used in the model included an artificial earthquake compatible to the design spectrum of NPP1, and a strong ground motion modified from the time history recorded during the Chi-Chi earthquake. The results show that the freestanding cask will slide, but not tip over, during strong earthquakes. The scale of the sliding is very small and a collision between casks will not occur. In addition, the differential settlement of the foundation pad that takes place due to the weight of the casks increases the sliding potential of the casks during earthquakes

  6. A real-time monitoring/emergency response modeling workstation for a tritium facility

    Lawver, B.S.; Sims, J.M.; Baskett, R.L.

    1993-07-01

    At Lawrence Livermore National Laboratory (LLNL) we developed a real-time system to monitor two stacks on our tritium handling facility. The monitors transmit the stack data to a workstation which computes a 3D numerical model of atmospheric dispersion. The workstation also collects surface and upper air data from meteorological towers and a sodar. The complex meteorological and terrain setting in the Livermore Valley demands more sophisticated resolution of the three-dimensional structure of the atmosphere to reliably calculate plume dispersion than afforded by Gaussian models. We experience both mountain valley and sea breeze flows. To address these complexities, we have implemented the three-dimensional diagnostic MATHEW mass-adjusted wind field and ADPIC particle-in-cell dispersion models on the workstation for use in real-time emergency response modeling. Both MATHEW and ADPIC have shown their utility in a variety of complex settings over the last 15 years within the Department of Energy's Atmospheric Release Advisory Capability (ARAC[1,2]) project

  7. 75 FR 36773 - Pipeline Safety: Updating Facility Response Plans in Light of the Deepwater Horizon Oil Spill

    2010-06-28

    ... have been, or are subsequently relocated to the Gulf to respond to the Deepwater Horizon event should.... PHMSA-2010-0175] Pipeline Safety: Updating Facility Response Plans in Light of the Deepwater Horizon Oil... 194. In light of the Deepwater Horizon oil spill in the Gulf of Mexico, which has resulted in the...

  8. Cross-sectional Survey of Long-Term Care Facilities in the Rockaway Peninsula: Preparedness and Response During Hurricane Sandy.

    Jiang, Lynn; Tedeschi, Christopher; Subaiya, Saleena

    2018-04-01

    Few studies have described the challenges experienced by long-term care facilities (LTCFs) following Hurricane Sandy. This study examined LTCF preparedness and experiences during and after the storm. A cross-sectional survey was conducted 2 years after Hurricane Sandy to assess LTCF demographics, preparation, and post-storm resources. Surveys were conducted at LTCFs located on the Rockaway Peninsula of New York City. All LTCFs located in a heavily affected area were approached. Of 29 facilities, 1 had closed, 5 did not respond, 9 declined to participate, and 14 participated, yielding a response rate of 50% for open facilities. Twenty-one percent of the facilities had preparations specifically for hurricanes. More than 70% of the facilities had lost electricity, heat, and telephone service, and one-half had evacuated. Twenty-one percent of the facilities reported not receiving any assistance and over one-half reported that relief resources did not meet their needs. Many LTCFs lacked plans specific to such a large-scale event. Since nearly all of the LTCFs in the region were affected, preexisting transportation and housing plans may have been inadequate. Future preparation could include hazard-specific planning and reliance on resources from a wider geographic area. Access to electricity emerged as a top priority. (Disaster Med Public Health Preparedness. 2018;12:194-200).

  9. Transient response and radiation dose estimates for breaches to a spent fuel processing facility

    Solbrig, Charles W., E-mail: soltechco@aol.com; Pope, Chad; Andrus, Jason

    2014-08-15

    Highlights: • We model doses received from a nuclear fuel facility from boundary leaks due to an earthquake. • The supplemental exhaust system (SES) starts after breach causing air to be sucked into the cell. • Exposed metal fuel burns increasing pressure and release of radioactive contamination. • Facility releases are small and much less than the limits showing costly refits are unnecessary. • The method presented can be used in other nuclear fuel processing facilities. - Abstract: This paper describes the analysis of the design basis accident for Idaho National Laboratory Fuel Conditioning Facility (FCF). The facility is used to process spent metallic nuclear fuel. This analysis involves a model of the transient behavior of the FCF inert atmosphere hot cell following an earthquake initiated breach of pipes passing through the cell boundary. Such breaches allow the introduction of air and subsequent burning of pyrophoric metals. The model predicts the pressure, temperature, volumetric releases, cell heat transfer, metal fuel combustion, heat generation rates, radiological releases and other quantities. The results show that releases from the cell are minimal and satisfactory for safety. This analysis method should be useful in other facilities that have potential for damage from an earthquake and could eliminate the need to back fit facilities with earthquake proof boundaries or lessen the cost of new facilities.

  10. Transient response and radiation dose estimates for breaches to a spent fuel processing facility

    Solbrig, Charles W.; Pope, Chad; Andrus, Jason

    2014-01-01

    Highlights: • We model doses received from a nuclear fuel facility from boundary leaks due to an earthquake. • The supplemental exhaust system (SES) starts after breach causing air to be sucked into the cell. • Exposed metal fuel burns increasing pressure and release of radioactive contamination. • Facility releases are small and much less than the limits showing costly refits are unnecessary. • The method presented can be used in other nuclear fuel processing facilities. - Abstract: This paper describes the analysis of the design basis accident for Idaho National Laboratory Fuel Conditioning Facility (FCF). The facility is used to process spent metallic nuclear fuel. This analysis involves a model of the transient behavior of the FCF inert atmosphere hot cell following an earthquake initiated breach of pipes passing through the cell boundary. Such breaches allow the introduction of air and subsequent burning of pyrophoric metals. The model predicts the pressure, temperature, volumetric releases, cell heat transfer, metal fuel combustion, heat generation rates, radiological releases and other quantities. The results show that releases from the cell are minimal and satisfactory for safety. This analysis method should be useful in other facilities that have potential for damage from an earthquake and could eliminate the need to back fit facilities with earthquake proof boundaries or lessen the cost of new facilities

  11. Responses of commercially available neutron electronic personal dosemeters in neutron fields simulating workplaces at MOX fuel fabrication facilities

    Tsujimura, N.; Yoshida, T.; Takada, C.

    2011-01-01

    The authors investigated the performance of three commercially available electronic personal dosemeters (EPDs) in evaluating neutron dose equivalents and discussed their suitability to work environments in MOX fuel fabrication facilities. The EPDs selected for this study were NRY21 (Fuji Electric Systems), PDM-313 (Aloka) and DMC 2000 GN (MGP Instruments). All tests were conducted in moderated 252 Cf neutron fields with neutron spectral and dosimetric characteristics similar to those found in MOX fuel facilities. The test results revealed trends and the magnitude of response variations in relation to neutron spectral changes expected in work environments.

  12. Banks’ Influence, through Tailor Made Services Offered to Tourists, on Encouraging International Transit: High-Tech Tourism of the 20th Century

    Aurora Costina Lincă

    2016-01-01

    Full Text Available In addition to basic indicators which determine the level of tourism at national and worldwidelevel, the alternative methods stand out increasingly more, helping to a deeper understanding oftravel preferences that people have. When deciding whether to be a tourist or not, what matter areboth the intrinsic motivation and environmental factors created particularly to facilitate therespective journey. Commercial banks in Romania have understood that, in order to survive in acompetitive environment (over 35 commercial banks are sharing the same market, they must adaptto customer needs and be receptive to partnerships with other industries. Thus, they launchedvarious types of cards with facilities for persons who travel and, by intense promotion, the banksurge other customers to become tourists. Considering these assumptions, the current paperanalyzes quantitatively the transactions at ATMs abroad and the number of Romanian outgoingtourists (people residing in Romania.

  13. 75 FR 54025 - Vessel and Facility Response Plans for Oil: 2003 Removal Equipment Requirements and Alternative...

    2010-09-03

    ... responders for each vessel or facility with appropriate equipment and resources located in each zone of operation; specific lists of equipment that the resource providers will make available in case of an...

  14. Direct facility funding as a response to user fee reduction: implementation and perceived impact among Kenyan health centres and dispensaries.

    Opwora, Antony; Kabare, Margaret; Molyneux, Sassy; Goodman, Catherine

    2010-09-01

    There is increasing pressure for reduction of user fees, but this can have adverse effects by decreasing facility-level funds. To address this, direct facility funding (DFF) was piloted in Coast Province, Kenya, with health facility committees (HFCs) responsible for managing the funds. We evaluated the implementation and perceived impact 2.5 years after DFF introduction. Quantitative data collection at 30 public health centres and dispensaries included a structured interview with the in-charge, record reviews and exit interviews. In addition, in-depth interviews were conducted with the in-charge and HFC members at 12 facilities, and with district staff and other stakeholders. DFF procedures were well established: HFCs met regularly and accounting procedures were broadly followed. DFF made an important contribution to facility cash income, accounting for 47% in health centres and 62% in dispensaries. The main items of expenditure were wages for support staff (32%), travel (21%), and construction and maintenance (18%). DFF was perceived to have a highly positive impact through funding support staff such as cleaners and patient attendants, outreach activities, renovations, patient referrals and increasing HFC activity. This was perceived to have improved health worker motivation, utilization and quality of care. A number of problems were identified. HFC training was reportedly inadequate, and no DFF documentation was available at facility level, leading to confusion. Charging user fees above those specified in the national policy remained common, and understanding of DFF among the broader community was very limited. Finally, relationships between HFCs and health workers were sometimes characterized by mistrust and resentment. Relatively small increases in funding may significantly affect facility performance when the funds are managed at the periphery. Kenya plans to scale up DFF nationwide. Our findings indicate this is warranted, but should include improved training

  15. The 200th anniversary of the stethoscope: Can this low-tech device survive in the high-tech 21st century?

    Bank, Ivan; Vliegen, Hubert W; Bruschke, Albert V G

    2016-12-14

    In 1816, Laennec discovered that auscultation of the heart and lungs could effectively be performed by placing a hollow cylinder (initially made of a roll of paper) between the chest of the patient and the ear of the examiner. This was the first step in the development of the stethoscope, which was a breakthrough in the diagnosis and management of cardiac and pulmonary patients. Technical improvements of the stethoscope followed and in cardiac patients auscultation soon became a major diagnostic tool. In the second half of the 20th century, new powerful non-invasive diagnostic modalities were developed and the interest in auscultation declined. As a result, the auscultatory skills of students and physicians at all levels of training decreased to a disappointingly low level. We now must decide whether we should stimulate the use of and proficiency in auscultation or if we should accept the further decline and eventual abolishment of this component of the physical examination. Reviewing the literature and taking into consideration the setting in which the patients are presented, including the availability of advanced diagnostic facilities, we conclude that the time-honoured stethoscope, in spite of its limitations, still has potential as a patient-friendly, effective, and economical instrument in medical practice. However, new initiatives are required to train students, physicians and allied health professionals in cardiac auscultation to avoid misinterpretations that may harm the patients and generate extra costs. To be successful such programs will require wide support from the medical community. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2016. For permissions please email: journals.permissions@oup.com.

  16. Designing of a mobile decontamination facility (MDF) for preparedness and response to nuclear/radiological emergencies

    Joshi, G.H.; Garai, S.K.; Chatterjee, M.K.; Pradeepkumar, K.S.; Sharma, D.N.

    2005-01-01

    During a radiological emergency in public domain, likelihood of radioactive contamination cannot be completely ruled out. Timely and effective decontamination can significantly reduce possible external and internal radiation exposure to public. The objective of designing of a mobile decontamination facility is to develop the capability for decontaminating affected persons in case of any radiological emergency in public domain. A fully equipped decontamination facility on the wheels will be able to reach at the scene and will be able to decontaminate a large number of victims with the help of optimized decontamination procedures in short duration avoiding unwanted radiation exposure. This self-supporting decontamination facility is designed to be equipped with sufficient number of radiation monitoring instruments, equipments for decontamination, decontamination agents etc. (author)

  17. Environmental Protection Agency (EPA) Facility Registry Service (FRS) Emergency Response (ER) Toxic Substances Control Act (TSCA) Facilities - Oil and Hazardous Materials

    Department of Homeland Security — The purpose of this web feature service is to provide users with access to integrated facility information from FRS, limited to the subset of facilities that link to...

  18. 40 CFR Appendix F to Part 112 - Facility-Specific Response Plan

    2010-07-01

    ... Federal Emergency Management Agency (FEMA), Department of Transportation (DOT), and EPA. The Handbook of.../Exercises 1.8.2.1Qualified Individual Notification Drill Logs 1.8.2.2Spill Management Team Tabletop Exercise... Hazardous Materials (HAZMAT) Spill Team 1, Facility Fire Engine Company 1, Production Supervisor, or...

  19. 7 CFR 1000.27 - Handler responsibility for records and facilities.

    2010-01-01

    ... make such records and its facilities available to the market administrator. If adequate records of a... and made available, any skim milk and butterfat required to be reported by such handler for which... quantities of skim milk and butterfat contained in, or represented by, products received in any form...

  20. 75 FR 5715 - Identification of Additional Classes of Facilities for Development of Financial Responsibility...

    2010-02-04

    ... as facilities engaged in the recycling of materials containing CERCLA hazardous substances as... addition, the Agency identified the Waste Management and Remediation Services industry (NAICS 562), the... Liability Act (CERCLA). In addition, the Agency identified the Waste Management and Remediation Services...

  1. Potential and Challenges of Low-Cost and High-Tech Crowd-sensing Approaches in Hydrometeorology for Better Water Resources Management - Insights and Learnings from the Global iMoMo Initiative

    Siegfried, Tobias

    2016-04-01

    In developing and transition countries and despite significant global investments in hydrometeorology, data on water remain scarce/fragmented. One key reason is that traditional sensing in hydrology, hydro- and agro-meteorology does not scale because of high investment costs and difficult maintenance of traditional technology, esp. in remote and/or poor regions. Even where there are data, these are often difficult to access and interpret for local stakeholders due outdated data transmission and the lack of access to modern tools for data management/analysis/synthesis and exchange. In recent years, there have been substantial technology developments in environmental sensing and mobile communication technology that enable the application and deployment of affordable and scalable high-tech solutions for better water monitoring at different scales (local to transboundary levels). The WMO is acknowledging and promoting the potential for application of these technologies. One key aspect is to anchor these technologies in local communities that perform crowd-sensing tasks on a regular basis. The merits as well as challenges (including introduction of human factor, less accuracy as compared to traditional sensing, intermittency of data, …) of such approaches will be discussed in the context of the WMO-led Global iMoMo Initiative and its numerous activities on the ground in Eastern and Southern Africa as well as in Central Asia.

  2. A proposed emergency management program for acute care facilities in response to a highly virulent infectious disease.

    Petinaux, Bruno; Ferguson, Brandy; Walker, Milena; Lee, Yeo-Jin; Little, Gary; Parenti, David; Simon, Gary

    2016-01-01

    To address the organizational complexities associated with a highly virulent infectious disease (HVID) hazard, such as Ebola Virus Disease (EVD), an acute care facility should institute an emergency management program rooted in the fundamentals of mitigation, preparedness, response, and recovery. This program must address all known facets of the care of a patient with HVID, from unannounced arrival to discharge. The implementation of such a program not only serves to mitigate the risks from an unrecognized exposure but also serves to prepare the organization and its staff to provide for a safe response, and ensure a full recovery. Much of this program is based on education, training, and infection control measures along with resourcing for appropriate personal protective equipment which is instrumental in ensuring an organized and safe response of the acute care facility in the service to the community. This emergency management program approach can serve as a model in the care of not only current HVIDs such as EVD but also future presentations in our healthcare setting.

  3. Influence of different irradiation facilities on the response of radioprotection devices

    Heeren de Oliveira, A.

    1984-05-01

    An EIC 1 extrapolation chamber, flushed with a methan based tissue equivalent gas is presented. This measuring device serves as a reference instrument to calibrate in tissue absorbed dose beta beams from different irradiation facilities; point radioactive sources, sources used with beam flattening filters, large area sources simulated by moving a point source. The source to detector distance has to be greater than 3 cm, requiring a transfer dosemeter for smaller distances. Influence of these different irradiation geometries has been studied on several radioprotection instruments (babyline, individual dosemeter, ionisation chamber), using three radionucleides: 147 Pm, 204 Tl, 90 Sr + 90 Y [fr

  4. Affordable rejuvenation: a prototype facility in action.

    Prokopov, Arkadi F; Reinmuth, Juergen

    2010-01-01

    The Strategies for Engineered Negligible Senescence (SENS) agenda contemplates specialized centers that offer a periodic rejuvenation and biogerontological maintenance for their clients. Although high-tech interventions are still in an early research phase, well-proven natural techniques, such as various forms of caloric/nutritional restriction, physical training, and preconditioning treatments, are not unanimously embraced due to poor adherence of patients. The practicability of such interventions can be significantly improved by "engineering" them for higher efficiency and better user friendliness. We describe practical experience in developing and running a prototype facility that uses rejuvenative treatment protocols, derived from two natural life span-prolonging strategies: Intermittent calorie/nutritive restriction (ICR) and intermittent oxygen restriction (IOR).

  5. Special Feature: Teaching about High Tech.

    Kopf, Michael; And Others

    1992-01-01

    Includes four articles: "Virtual Reality" (Kopf), description of its uses in computer-assisted design, architecture, and technical training; "SME (Society of Manufacturing Engineers) Robotics Contest Opens Doors to Future" (Wagner); "Superconductivity" (Canady), description of classroom demonstrations and experiments;…

  6. Globalizing High-Tech Business Models

    Turcan, Romeo V.

    2012-01-01

    resources and behavioral patterns. Two sources could be identified that effect these tensions, namely strategic experimentation and business model experimentation. For example, entrepreneurs are trying to ease the tensions in the organizational gestalt as a result of a change in the business model...... and growth path. To internationalize, international new ventures have to develop a product-led business model as services do not travel. Opting to attract venture capital, entrepreneurs are to deal with dyadic tensions that are the result of differences in entrepreneurs’ and VCs’ goals and measures...

  7. [Doping. High-tech cheating in sport].

    Striegel, H; Simon, P

    2007-07-01

    Today, doping is no longer limited to the classical drugs with well known effects and side effects. Older generation anabolic steroids are used mainly in fitness and recreational sports. In contrast, due to doping tests, substances used in competitive sports include peptide hormones, medications not yet approved, and even specially developed drugs, such as designer steroids. Of the peptide hormones, particularly growth hormones (human growth hormone), erythropoietin and generics, insulin, and presumably insulin-like growth factor 1 are used. Substance groups potentially relevant for doping are selective androgen receptor modulators and gene therapy drugs. For most of these, there is no knowledge about side effects in healthy individuals, and no adequate doping tests. Therefore, anti-doping measures cannot rely solely on the continual improvement of doping analyses, but should include increased measures for doping prevention. Not only sports organizations, but also governmental agencies should be involved in developing and implementing these measures.

  8. From Batteries and Bulbs to High Tech.

    Schwartz, Maurice L.; Schwartz, Ivan C.

    1986-01-01

    Presents a new, high-technology approach to making bulbs light in series and parallel circuits. Contains diagrams that illustrate the circuit patterns. Provides suggestions for applying the electronic principles that were addressed in the activities. (ML)

  9. High Tech Campus Eindhoven, Netwerk van ontmoetingsmogelijkheden

    Doevendans, C.H.

    2005-01-01

    Eindhoven wil zichzelf als brainport op de kaart zetten, als centrum van de Nederlandse kenniseconomie. Stond Eindhoven van oudsher vooral bekend als de Philips company town, in het postindustriële tijdperk moet het een innovatieve netwerkstad worden. Een brandpunt van innovatieve cultuur en

  10. High tech hypofractionation to optimise treatment

    Johansen, Jørgen

    2015-01-01

    Hypofractionation has lately been implemented as standard treatment in the adjuvant setting as well as in radical radiotherapy for various solid tumors such as in breast and lung carcinomas. Also for metastatic disease in the liver or brain, hypofractionated stereotactic radiotherapy has proven e...

  11. High tech conveyors unitize Selby coal

    1985-10-01

    Designs proposed by Anderson Strathclyde PLC and Cable Belt for single-flight conveyors to bring the output of the five Selby mines to the surface have both been developed by the UK National Coal Board. Both designs extend the limits of conveyor technology and are expected to economise on transport and longwalling costs. 4 references.

  12. Lifting high-tech pour le LHC

    Vos, Anton

    2009-01-01

    Un an après l'accident qui a conduit à son arrêt total, l'accélérateur de particules est à nouveau prêt à ouvrir de nouveaux chapitres de la physique. Tour d'horizon des réparations. (1 page)

  13. High-Tech/High-Touch: High Time?

    Cohen, Stephen L.; Rustad, James M.

    1998-01-01

    Technology has potential for teaching soft skills--typically those that are culture, gender, and model based. Authoring software for training is still being refined and interactivity is not where it needs to be for many applications.(JOW)

  14. Workplace High Tech Spurs Retraining Efforts.

    Davis, Dwight B.

    1984-01-01

    Discusses who should provide training for displaced workers who need new skills. Areas examined include: (1) the need for retraining; (2) current corporate efforts; (3) agreements in the automotive industry; (4) job quality; (5) the federal government's role; and (6) federal legislation related to the problem. (JN)

  15. High-tech solutions for the environment

    Gabrielle Thomas

    2013-01-01

    Four solar-powered compactor dustbins have recently been installed at various locations around the Meyrin site. These compact systems fitted with photovoltaic panels compress waste; their increased capacity compared to a standard dustbin reduces the number of collections and the associated CO2 emissions.   Four strange "machines" have recently appeared on the CERN site. Made by the company Big Belly, these intelligent solar-powered mini-compactors fitted with the latest energy-saving technology are perfectly aligned with the Laboratory's policy of minimising the impact of its activities on the environment. With their ability to hold up to four times more waste than the average bin, they need to be emptied less frequently, significantly reducing the CO2 emissions associated with collection and transport. What's more, the integrated software monitors the fill level of each bin in real time and sends an e-mail or text when it needs emptying, thus optimising coll...

  16. Idaho National Engineering Laboratory response to the December 13, 1991, Congressional inquiry on offsite release of hazardous and solid waste containing radioactive materials from Department of Energy facilities

    Shapiro, C.; Garcia, K.M.; McMurtrey, C.D.; Williams, K.L.; Jordan, P.J.

    1992-05-01

    This report is a response to the December 13, 1991, Congressional inquiry that requested information on all hazardous and solid waste containing radioactive materials sent from Department of Energy facilities to offsite facilities for treatment or disposal since January 1, 1981. This response is for the Idaho National Engineering Laboratory. Other Department of Energy laboratories are preparing responses for their respective operations. The request includes ten questions, which the report divides into three parts, each responding to a related group of questions. Part 1 answers Questions 5, 6, and 7, which call for a description of Department of Energy and contractor documentation governing the release of waste containing radioactive materials to offsite facilities. ''Offsite'' is defined as non-Department of Energy and non-Department of Defense facilities, such as commercial facilities. Also requested is a description of the review process for relevant release criteria and a list of afl Department of Energy and contractor documents concerning release criteria as of January 1, 1981. Part 2 answers Questions 4, 8, and 9, which call for information about actual releases of waste containing radioactive materials to offsite facilities from 1981 to the present, including radiation levels and pertinent documentation. Part 3 answers Question 10, which requests a description of the process for selecting offsite facilities for treatment or disposal of waste from Department of Energy facilities. In accordance with instructions from the Department of Energy, the report does not address Questions 1, 2, and 3

  17. Empirical analysis about the influencing factors of municipal project financing in high-tech industry development zone%高新技术产业开发区市政工程融资的影响因素实证分析

    廖慧

    2013-01-01

    文章基于高新技术产业开发区市政工程融资问题的实际情况,构建了其融资影响因素模型,运用结构方程模型并借助相关调研数据,对高新区市政工程融资的影响因素展开了实证,从多角度提出了推进高新区市政工程开发的融资策略。%Based on the actual situation of financing problems of municipal engineering in high-tech industrial development zone,this paper constructed model to analyse the influencing factors of financing.According to structural equation model and corresponding survey data,influencing factors of municipal project financing in high-tech industry development zone were demonstrated,financing tactics of improving the development of municipal project in high-tech industry development zone are provided from multiple point of view.

  18. Assessing the performance of mental health service facilities for meeting patient priorities and health service responsiveness.

    Bramesfeld, A; Stegbauer, C

    2016-10-01

    The World Health Organisation has defined health service responsiveness as one of the key-objectives of health systems. Health service responsiveness relates to the ability to respond to service users' legitimate expectations on non-medical issues when coming into contact with the services of a healthcare system. It is defined by the areas showing respect for persons and patient orientation. Health service responsiveness is particularly relevant to mental health services, due to the specific vulnerability of mental health patients but also because it matches what mental health patients consider as good quality of care as well as their priorities when seeking healthcare. As (mental) health service responsiveness applies equally to all concerned services it would be suitable as a universal indicator for the quality of services' performance. However, performance monitoring programs in mental healthcare rarely assess health service performance with respect to meeting patient priorities. This is in part due of patient priorities as an outcome being underrepresented in studies that evaluate service provision. The lack of studies using patient priorities as outcomes transmits into evidence based guidelines and subsequently, into underrepresentation of patient priorities in performance monitoring. Possible ways out of this situation include more intervention studies using patient priorities as outcome, considering evidence from qualitative studies in guideline development and developing performance monitoring programs along the patient pathway and on key-points of relevance for service quality from a patient perspective.

  19. The Effects of Response Effort on Safe Performance by Therapists at an Autism Treatment Facility

    Casella, Sarah E.; Wilder, David A.; Neidert, Pamela; Rey, Catalina; Compton, Megan; Chong, Ivy

    2010-01-01

    The effects of response effort on safe behaviors (i.e., glove wearing, hand sanitizing, and electrical outlet replacement) exhibited by therapists at an autism treatment center were examined. Participants were exposed to 2 or 3 levels of effort (i.e., high, medium, low) for each dependent variable. Results showed increased safe performance during…

  20. WS-008: EPR-First Responders: Establishment of facilities and zones of response

    2011-01-01

    The purpose of this working session is that the participants can apply their knowledge in a city explosion. The first responder have to identify the incident commander, the type of response required, the risks of the emergency, the requirements for transporting the victims to the hospital and the actors involved in a radiological emergency. The first responder have to know the time of the emergency, the number of potential victims, the equipment required and the responder number

  1. Injectable, Biomolecule-Responsive Polypeptide Hydrogels for Cell Encapsulation and Facile Cell Recovery through Triggered Degradation.

    Xu, Qinghua; He, Chaoliang; Zhang, Zhen; Ren, Kaixuan; Chen, Xuesi

    2016-11-16

    Injectable hydrogels have been widely investigated in biomedical applications, and increasing demand has been proposed to achieve dynamic regulation of physiological properties of hydrogels. Herein, a new type of injectable and biomolecule-responsive hydrogel based on poly(l-glutamic acid) (PLG) grafted with disulfide bond-modified phloretic acid (denoted as PLG-g-CPA) was developed. The hydrogels formed in situ via enzymatic cross-linking under physiological conditions in the presence of horseradish peroxidase and hydrogen peroxide. The physiochemical properties of the hydrogels, including gelation time and the rheological property, were measured. Particularly, the triggered degradation of the hydrogel in response to a reductive biomolecule, glutathione (GSH), was investigated in detail. The mechanical strength and inner porous structure of the hydrogel were influenced by the addition of GSH. The polypeptide hydrogel was used as a three-dimensional (3D) platform for cell encapsulation, which could release the cells through triggered disruption of the hydrogel in response to the addition of GSH. The cells released from the hydrogel were found to maintain high viability. Moreover, after subcutaneous injection into rats, the PLG-g-CPA hydrogels with disulfide-containing cross-links exhibited a markedly faster degradation behavior in vivo compared to that of the PLG hydrogels without disulfide cross-links, implying an interesting accelerated degradation process of the disulfide-containing polypeptide hydrogels in the physiological environment in vivo. Overall, the injectable and biomolecule-responsive polypeptide hydrogels may serve as a potential platform for 3D cell culture and easy cell collection.

  2. Strategies for energy benchmarking in cleanrooms and laboratory-type facilities

    Sartor, Dale; Piette, Mary Ann; Tschudi, William; Fok, Stephen

    2000-01-01

    Buildings with cleanrooms and laboratories are growing in terms of total floor area and energy intensity. This building type is common in institutions such as universities and in many industries such as microelectronics and biotechnology. These buildings, with high ventilation rates and special environmental considerations, consume from 4 to 100 times more energy per square foot than conventional commercial buildings. Owners and operators of such facilities know they are expensive to operate, but have little way of knowing if their facilities are efficient or inefficient. A simple comparison of energy consumption per square foot is of little value. A growing interest in benchmarking is also fueled by: A new U.S. Executive Order removing the exemption of federal laboratories from energy efficiency goals, setting a 25% savings target, and calling for baseline guidance to measure progress; A new U.S. EPA and U.S. DOE initiative, Laboratories for the 21st Century, establishing voluntary performance goals and criteria for recognition; and A new PG and E market transformation program to improve energy efficiency in high tech facilities, including a cleanroom energy use benchmarking project. This paper identifies the unique issues associated with benchmarking energy use in high-tech facilities. Specific options discussed include statistical comparisons, point-based rating systems, model-based techniques, and hierarchical end-use and performance-metrics evaluations

  3. Study of developing nuclear fabrication facility's integrated emergency response manual

    Kim, Taeh Yeong; Cho, Nam Chan; Han, Seung Hoon; Moon, Jong Han; Lee, Jin Hang [KEPCO, Daejeon (Korea, Republic of); Min, Guem Young; Han, Ji Ah [Dongguk Univ., Daejeon (Korea, Republic of)

    2016-05-15

    Public begin to pay attention to emergency management. Thus, public's consensus on having high level of emergency management system up to advanced country's is reached. In this social atmosphere, manual is considered as key factor to prevent accident or secure business continuity. Therefore, we first define possible crisis at KEPCO Nuclear Fuel (hereinafter KNF) and also make a 'Reaction List' for each crisis situation at the view of information-design. To achieve it, we analyze several country's crisis response manual and then derive component, indicate duties and roles at the information-design point of view. From this, we suggested guideline to make 'Integrated emergency response manual(IERM)'. The manual we used before have following few problems; difficult to applicate at the site, difficult to deliver information. To complement these problems, we searched manual elements from the view of information-design. As a result, we develop administrative manual. Although, this manual could be thought as fragmentary manual because it confined specific several agency/organization and disaster type.

  4. Neutron-induced nuclear data for the MYRRHA fast spectrum facility

    Romojaro Pablo; Žerovnik Gašper; Álvarez-Velarde Francisco; Stankovskiy Alexey; Kodeli Ivan; Fiorito Luca; Díez Carlos Javier; Cabellos Óscar; García-Herranz Nuria; Heyse Jan; Paradela Carlos; Schillebeeckx Peter; Eynde Gert Van den

    2017-01-01

    The MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) concept is a flexible experimental lead-bismuth cooled and mixed-oxide (MOX) fueled fast spectrum facility designed to operate both in sub-critical (accelerator driven) and critical modes. One of the key issues for the safe operation of the reactor is the uncertainty assessment during the design works. The main objective of the European project CHANDA (solving CHAllenges in Nuclear DAta) Work Package 10 is to improv...

  5. Emergency response facilities including primary and secondary prevention strategies across 79 professional football clubs in England.

    Malhotra, Aneil; Dhutia, Harshil; Gati, Sabiha; Yeo, Tee-Joo; Finocchiaro, Gherardo; Keteepe-Arachi, Tracey; Richards, Thomas; Walker, Mike; Birt, Robin; Stuckey, David; Robinson, Laurence; Tome, Maite; Beasley, Ian; Papadakis, Michael; Sharma, Sanjay

    2017-06-14

    To assess the emergency response planning and prevention strategies for sudden cardiac arrest (SCA) across a wide range of professional football clubs in England. A written survey was sent to all professional clubs in the English football league, namely the Premiership, Championship, League 1 and League 2. Outcomes included: (1) number of clubs performing cardiac screening and frequency of screening; (2) emergency planning and documentation; (3) automated external defibrillator (AED) training and availability; and (4) provision of emergency services at sporting venues. 79 clubs (86%) responded to the survey. 100% clubs participated in cardiac screening. All clubs had AEDs available on match days and during training sessions. 100% Premiership clubs provided AED training to designated staff. In contrast, 30% of lower division clubs with AEDs available did not provide formal training. Most clubs (n=66; 83%) reported the existence of an emergency action plan for SCA but formal documentation was variable. All clubs in the Premiership and League 1 provided an ambulance equipped for medical emergencies on match days compared with 75% of clubs in the Championship and 66% in League 2. The majority of football clubs in England have satisfactory prevention strategies and emergency response planning in line with European recommendations. Additional improvements such as increasing awareness of European guidelines for emergency planning, AED training and mentorship with financial support to lower division clubs are necessary to further enhance cardiovascular safety of athletes and spectators and close the gap between the highest and lower divisions. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  6. Respiratory dysfunction in swine production facility workers: dose-response relationships of environmental exposures and pulmonary function.

    Donham, K J; Reynolds, S J; Whitten, P; Merchant, J A; Burmeister, L; Popendorf, W J

    1995-03-01

    Human respiratory health hazards for people working in livestock confinement buildings have been recognized since 1974. However, before comprehensive control programs can be implemented, more knowledge is needed of specific hazardous substances present in the air of these buildings, and at what concentrations they are harmful. Therefore, a medical epidemiological and exposure-response study was conducted on 207 swine producers using intensive housing systems (108 farms). Dose-response relationships between pulmonary function and exposures are reported here. Positive correlations were seen between change in pulmonary function over a work period and exposure to total dust, respirable dust, ammonia, respirable endotoxin, and the interactions of age-of-producer and dust exposure and years-of-working-in-the-facility and dust exposure. Relationships between baseline pulmonary function and exposures were not strong and therefore, not pursued in this study. The correlations between exposure and response were stronger after 6 years of exposure. Multiple regression models were used to identify total dust and ammonia as the two primary environmental predictors of pulmonary function decrements over a work period. The regression models were then used to determine exposure concentrations related to pulmonary function decrements suggestive of a health hazard. Total dust concentrations > or = 2.8 mg/m3 were predictive of a work period decrement of > or = 10% in FEV1. Ammonia concentrations of > or = 7.5 ppm were predictive of a > or = 3% work period decrement in FEV1. These predictive concentrations were similar to a previous dose-response study, which suggested 2.5 mg/m3 of total dust and 7 ppm of NH3 were associated with significant work period decrements. Therefore, dust > or = 2.8 mg/m3 and ammonia > or = 7.5 ppm should be considered reasonable evidence for guidelines regarding hazardous exposure concentrations in this work environment.

  7. Simulations of the Response of the Cluster Detector/Scintillator Wall for the 4π facility at SIS/ESR using the GEANT Detector program

    Herrmann, N.; Maguire, C.F.; Cerruti, C.; Coffin, J.P.; Fintz, P.; Guillaume, G.; Jundt, F.; Rami, F.; Tezkratt, R.; Wagner, P.

    1990-01-01

    The expected response of the cluster detector/scintillator wall of the SIS/ESR 4π facility has been investigated with the use of the GEANT detector program and the FREESCO event generator code. Results are presented and discussed. It is shown in particular that the efficiency of the track reconstruction method should be acceptable

  8. Summary, analysis, and response to public comments on proposed amendments to 10 CFR Parts 30, 40, 50, 51, 70, and 72: Decommissioning criteria for nuclear facilities

    1988-06-01

    On February 11, 1985, the NRC issued for public comment proposed rules on decommissioning of nuclear facilities (50 FR 5600). Comment letters were received from 143 organizations and individuals. This report provides a summary and analysis and response to the public comments received

  9. Kirju sadam : High Tech Center, Tammasaarenkatu, Helsingi = On the waterfront : High Tech Centre

    2004-01-01

    Projekt koosneb viiest hoonest, millest neli asetsevad mere ääres Tammasaare tänaval ja viies Kaapeli väljakul. Projekteerija: arhitektibüroo Wartiainen, Evata Finland. Autor Kai Wartiainen. Valmis 2002. I korruse plaan, 4 välis ja 2 sisevaadet

  10. Report on the emergency response to the event on May 14, 1997, at the plutonium reclamation facility, Hanford Site, Richland,Washington

    Shoop, D.S.

    1997-01-01

    On the evening of May 14,1997, a chemical explosion Occurred at the Plutonium Reclamation Facility (PRF) in the 200 West Area(200-W) of the Hanford Site. The event warranted the declaration of an Alert emergency, activation of the Hanford Emergency Response Organization (BRO), and notification of offsite agencies. As a result of the emergency declaration, a subsequent evaluation was conducted to assess: 9 the performance of the emergency response organization o the occupational health response related to emergency activities o event notifications to offsite and environmental agencies. Additionally, the evaluation was designed to: 9 document the chronology of emergency and occupational health responses and environmental notifications connected with the explosion at the facility 0 assess the adequacy of the Hanford Site emergency preparedness activities; response readiness; and emergency management actions, occupational health, and environmental actions 0 provide an analysis of the causes of the deficiencies and weaknesses in the preparedness and response system that have been identified in the evaluation of the response a assign organizational responsibility to correct deficiencies and weaknesses a improve future performance 0 adjust elements of emergency implementing procedures and emergency preparedness activities

  11. A dose-response relationship between long working hours and unmet need for access to hospital facilities.

    Soek, Hongdeok; Won, Jong-Uk; Lee, Tae Il; Kim, Yeong-Kwang; Lee, Wanhyung; Lee, June-Hee; Roh, Jaehoon; Yoon, Jin-Ha

    2016-03-01

    Lack of access to hospital facilities, indicating unmet healthcare need, plays an important role in health inequity in the workplace. We aimed to investigate the association between long working hours and unmet healthcare need. We used data from the Korea National Health and Nutrition Examination Surveys collected during 2007-2012, which included 8369 participants (4765 males, 3604 females) aged 20-54 years, who were paid workers. We used a logistic regression model with gender stratification to investigate the association between working hours and unmet healthcare need. Of the 8369 participants, 855 males (17.94%) and 981 females (27.22%) experienced unmet healthcare need. After adjusting for covariates, and compared to 30-39 working hours per week, the odds ratios (OR) of unmet healthcare need were 1.07 [(95% confidence interval (95% CI) 0.76-1.51], 1.46 (95% CI 1.03-2.07), and 1.57 (95% CI 1.11-2.23) in males, and 1.13 (95% CI 0.92-1.40), 1.30 (95% CI 0.99-1.69), and 1.60 (95% CI 1.21-2.10) in females, for 40-49, 50-59, and ≥ 60 work hours per week, respectively. There was a dose-response relationship between working hours per week and unmet healthcare need in both genders. Those who work long hours are more likely to have unmet healthcare needs, the cause of which seems to be lack of time.

  12. Comparative Study of Determining of the Responsible Person and the Basis of Compensation in Civil Liability Results from Events Related to Nuclear Facilities

    Sayyed Mohammad Mahdi Qabuli Dorafshan

    2015-12-01

    Full Text Available Nuclear facilities, though have large advantages for human being, they also creates heavy hazards. Thus, the question of civil liability results from events of mentioned facilities are so significant. This paper studies the question of the basis and responsible for compensation results from aforementioned events in international instruments, Iran and French law. Outcome of this study shows that in this regard, Paris and Vienna conventions and the other related conventions and protocols adjust a special legal régime. In this respect, the international instruments while distancing themselves from liability based on fault, highlight the exclusive responsibility of the operator of nuclear facilities and they have commited the operator to insurance or appropriate secure financing. Also French legal régime have followed this manner with the impact of the Paris Convention and its amendments and additions. There is no special provisions in Iran legal régime in this matter so civil liability results from nuclear events is under general rules of civil liability and rules such Itlaf (loss, Tasbib (causation, Taqsir (fault and La-zarar (no damage in the context of Imamye jurisprudence. Ofcourse, the responsible is basically the one who the damage is attributable to him. Finaly, It is appropriate that the Iranian legislator predict favorable régime and provides special financial fund for compensation of possible injured parties in accordance with necessities and specific requirements related to nuclear energy

  13. 78 FR 9902 - DOE Response to Recommendation 2012-2 of the Defense Nuclear Facilities Safety Board, Hanford...

    2013-02-12

    ... Safety Board, Hanford Tank Farms Flammable Gas Safety Strategy; Correction AGENCY: Department of Energy. ACTION: Notice; Correction SUMMARY: The Department of Energy (DOE) published a document in the Federal... Facilities Safety Board, Hanford Tank Farms Flammable Gas Safety Strategy. This document corrects an error in...

  14. Facilities & Leadership

    Department of Veterans Affairs — The facilities web service provides VA facility information. The VA facilities locator is a feature that is available across the enterprise, on any webpage, for the...

  15. 33 CFR 154.1045 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    2010-07-01

    ... contained in 40 CFR part 300, and available online from the U.S. Government Printing Office). (ii... February 18, 1993, and February 18, 1998. Depending on the quantity and type of petroleum oil handled by... response capability across the full spectrum of response modes. As best available technology demonstrates a...

  16. The care of Filipino juvenile offenders in residential facilities evaluated using the risk-need-responsivity model

    Spruit, A.; Wissink, I.B.; Stams, G.J.J.M.

    According to the risk-need-responsivity model of offender, assessment and rehabilitation treatment should target specific factors that are related to re-offending. This study evaluates the residential care of Filipino juvenile offenders using the risk-need-responsivity model. Risk analyses and

  17. Biochemistry Facility

    Federal Laboratory Consortium — The Biochemistry Facility provides expert services and consultation in biochemical enzyme assays and protein purification. The facility currently features 1) Liquid...

  18. Calculations of radiation fields and monkey mid-head and mid-thorax responses in AFRRI-TRIGA reactor facility experiments

    Johnson, J.O.; Emmett, M.B.; Pace, J.V. III.

    1983-07-01

    A computational study was performed to characterize the radiation exposure fields and the mid-head and mid-thorax response functions for monkeys irradiated in the Armed Forces Radiobiological Research Institute (AFRRI) reactor exposure facilities. Discrete ordinates radiation transport calculations were performed in one-dimensional spherical geometry to obtain the energy spectra of the neutrons and gamma rays entering the room through various spectrum modifiers and reaching the irradiation position. Adjoint calculations performed in two-dimensional cylindrical geometry yielded the mid-head and mid-thorax response functions, which were then folded with flux spectra to obtain the monkey mid-head and mid-thorax doses (kerma rates) received at the irradiation position. The results of the study are presented both as graphs and as tables. The resulting spectral shapes compared favorably with previous work; however, the magnitudes of the fluxes did not. The differences in the magnitudes may be due to the normalization factor used

  19. Low-dose neutron dose response of zebrafish embryos obtained from the Neutron exposure Accelerator System for Biological Effect Experiments (NASBEE) facility

    Ng, C.Y.P.; Kong, E.Y.; Konishi, T.; Kobayashi, A.; Suya, N.; Cheng, S.H.; Yu, K.N.

    2015-01-01

    The dose response of embryos of the zebrafish, Danio rerio, irradiated at 5 h post fertilization (hpf) by 2-MeV neutrons with ≤100 mGy was determined. The neutron irradiations were made at the Neutron exposure Accelerator System for Biological Effect Experiments (NASBEE) facility in the National Institute of Radiological Sciences (NIRS), Chiba, Japan. A total of 10 neutron doses ranging from 0.6 to 100 mGy were employed (with a gamma-ray contribution of 14% to the total dose), and the biological effects were studied through quantification of apoptosis at 25 hpf. The responses for neutron doses of 10, 20, 25, and 50 mGy approximately fitted on a straight line, while those for neutron doses of 0.6, 1 and 2.5 mGy exhibited neutron hormetic effects. As such, hormetic responses were generically developed by different kinds of ionizing radiations with different linear energy transfer (LET) values. The responses for neutron doses of 70 and 100 mGy were significantly below the lower 95% confidence band of the best-fit line, which strongly suggested the presence of gamma-ray hormesis. - Highlights: • Neutron dose response was determined for embryos of the zebrafish, Danio rerio. • Neutron doses of 0.6, 1 and 2.5 mGy led to neutron hormetic effects. • Neutron doses of 70 and 100 mGy accompanied by gamma rays led to gamma-ray hormesis

  20. Beyond "Home-Like" Design: Visitor Responses to an Immersive Creative Space in a Canadian Long-Term Care Facility.

    Graham, Megan E; Fabricius, Andréa

    2017-11-01

    This study examined the benefits of expanding upon the "home-like" design by introducing an immersive creative space for residents, staff, and visitors to explore in a long-term care facility in Eastern Ontario, Canada. Data were collected through guestbook comments ( N = 93) and coded for themes according to guidelines for thematic analysis. Selected themes included visitors' enjoyment of the winter aesthetic, expressions of gratitude to the artists, time spent socializing with family and visitors in a creative milieu, and the experience of remembering in an evocative space. The results indicate that residents and visitors benefited from the experience of a creative space that was neither institutional, nor "home-like." Implications for future research are discussed.

  1. Pulse mitigation and heat transfer enhancement techniques. Volume 3: Liquid sodium heat transfer facility and transient response of sodium heat pipe to pulse forward and reverse heat load

    Chow, L. C.; Hahn, O. J.; Nguyen, H. X.

    1992-08-01

    This report presents the description of a liquid sodium heat transfer facility (sodium loop) constructed to support the study of transient response of heat pipes. The facility, consisting of the loop itself, a safety system, and a data acquisition system, can be safely operated over a wide range of temperature and sodium flow rate. The transient response of a heat pipe to pulse heat load at the condenser section was experimentally investigated. A 0.457 m screen wick, sodium heat pipe with an outer diameter of 0.127 m was tested under different heat loading conditions. A major finding was that the heat pipe reversed under a pulse heat load applied at the condenser. The time of reversal was approximately 15 to 25 seconds. The startup of the heat pipe from frozen state was also studied. It was found that during the startup process, at least part of the heat pipe was active. The active region extended gradually down to the end of the condenser until all of the working fluid in the heat pipe was molten.

  2. Dance Facilities.

    Ashton, Dudley, Ed.; Irey, Charlotte, Ed.

    This booklet represents an effort to assist teachers and administrators in the professional planning of dance facilities and equipment. Three chapters present the history of dance facilities, provide recommended dance facilities and equipment, and offer some adaptations of dance facilities and equipment, for elementary, secondary and college level…

  3. The photovoltaic planar antenna - high-tech with multifunctional utilisation of the physical properties of solar cells. Paper; Die photovoltaische Planarantenne - High-Tec durch multifunktionale Nutzung der physikalischen Eigenschaften von Solarzellen. Paper

    Bendel, C.; Kirchhof, J.; Henze, N. [Institut fuer Solare Energieversorgungstechnik (ISET), Kassel (Germany)

    2001-07-01

    The use of the photovoltaic energy conversion for power supply has been practised successfully in communication technological facilities for years. Problems often arise regarding the optimal installation locations and orientations of the components Solar-Cell/-module and antenna, because they mutually visually or electromagnetically often disturb themselves. The partly very high direct costs also cause difficulties at the simultaneous use of both components. The vision arising at the ISET, was to use this unintentional effect of the parasitical irradiation as new multifunctional quality of solar cells. The ''Solar Planar Antenna'' could take both radio and energy supply functions of electric equipment or systems and make completely new equipment design and system concepts possible. After some finally promising tests the ''Solar Planar Antenna'' was applied as German, European, US-American and Japanese patent. The name SOLPLANT became a registered trademark. The ''Solar Planar Antenna'' shall be used in products where the simultaneous use of photovoltaic and Radio Frequency facilities are still incompatible. Some of the possible applications are compact measurement stations with RF-based communication, GPS-based navigation systems, communication base stations, antenna and battery charger at mobile telephone handsets, ''Bluetooth'' based computer devices and accessories like keyboards, trackballs or organisers. Together with a digital signal conditioning in combination with an array of ''Solar Planar Antennas'' a digital coil forming is possible. With this feature the antenna can be used as high gain antenna and it is possible to blind out noise and distortions. [German] Die Nutzung der photovoltaischen Energiewandlung zur Stromversorgung wird in kommunikationstechnischen Einrichtungen seit Jahren erfolgreich praktiziert. Probleme bereiten oft die optimalen

  4. A ``Cyber Wind Facility'' for HPC Wind Turbine Field Experiments

    Brasseur, James; Paterson, Eric; Schmitz, Sven; Campbell, Robert; Vijayakumar, Ganesh; Lavely, Adam; Jayaraman, Balaji; Nandi, Tarak; Jha, Pankaj; Dunbar, Alex; Motta-Mena, Javier; Craven, Brent; Haupt, Sue

    2013-03-01

    The Penn State ``Cyber Wind Facility'' (CWF) is a high-fidelity multi-scale high performance computing (HPC) environment in which ``cyber field experiments'' are designed and ``cyber data'' collected from wind turbines operating within the atmospheric boundary layer (ABL) environment. Conceptually the ``facility'' is akin to a high-tech wind tunnel with controlled physical environment, but unlike a wind tunnel it replicates commercial-scale wind turbines operating in the field and forced by true atmospheric turbulence with controlled stability state. The CWF is created from state-of-the-art high-accuracy technology geometry and grid design and numerical methods, and with high-resolution simulation strategies that blend unsteady RANS near the surface with high fidelity large-eddy simulation (LES) in separated boundary layer, blade and rotor wake regions, embedded within high-resolution LES of the ABL. CWF experiments complement physical field facility experiments that can capture wider ranges of meteorological events, but with minimal control over the environment and with very small numbers of sensors at low spatial resolution. I shall report on the first CWF experiments aimed at dynamical interactions between ABL turbulence and space-time wind turbine loadings. Supported by DOE and NSF.

  5. Facile approach to prepare pH and redox-responsive nanogels via Diels-Alder click reaction

    C. M. Q. Le

    2018-08-01

    Full Text Available A novel pH and redox responsive system of sub-100 nm nanogels was prepared by arm-first approach via Diels-Alder click reaction. First, well-defined poly(ethylene glycol-block-poly(styrene-alt-maleic anhydride (PEG-b-PSM was synthesized and subsequently functionalized with furfuryl amine, leading to the formation of the dual-functional block copolymer of PEG-b-PSMf. The furfuryl groups in the PSMf block were employed to incorporate a redox-responsive linkage and the carboxylic acid moieties generated through functionalization acted as a pH-responsive part. The Diels-Alder click reaction between a bismaleimide crosslinker and PEG-b-PSMf was conducted at 60 °C, affording star-like nanogel structures. Doxorubicin, a model anticancer drug, was loaded into to the core of the nanogels primarily by the ionic interaction with carboxylates of core blocks and a highest drug loading capacity of 38.1% was obtained. Furthermore, the in vitro profile showed a low release percentage (11.2% of DOX at PBS pH 7.4, whereas a burst release (62% at pH 5.0 in the presence of 10 mM glutathione, indicating the effective pH and redox responsive characteristic of the PEG-b-PSMf nanogels.

  6. Analysis of Cell Biomechanics Response to Gravity:A Fluids for Biology Study Utilizing NASA Glenns Zero Gravity Research Facility

    Bomani, Bilal M. M.; Kassemi, Mohammad; Neumann, Eric S.

    2016-01-01

    It remains unclear how biological cells sense and respond to gravitational forces. Leading scientists state that a large gap exists in the understanding of physiological and molecular adaptation that occurs as biology enters the spaceflight realm. We are seeking a method to fully understand how cells sense microgravity/gravity and what triggers their response.

  7. The photosynthetic acclimation response of Lolium perenne to four years growth in a free-air CO{sub 2} enrichment (FACE) facility

    Creasey, R. [Univ. of Essex (United Kingdom)

    1996-11-01

    In this study, the photosynthetic responses of field grown Lolium perenne to ambient (354 {mu}mol mol{sup -1}) and elevated (600 {mu}mol mol{sup -1}) C{sub a} were measured. The experiment utilized the FACE facility at Eschikon, Switzerland; here the L. Perenne swards had been grown at two nitrogen treatments, with six cuts per year, for 4 years. The study revealed a significant decrease in Rubisco activity (Vcmax) in the low nitrogen FACE plots; this is consistent with the theories of source-sink imbalance resulting in feedback inhibition and down-regulation. Such negative acclimation was not wholly supported by diurnal investigations which revealed an average stimulation of 53.38% and 52.78% in the low and high nitrogen, respectively. However, light response curves and AI investigations also suggested down-regulation, especially in the low nitrogen. SI is expected to decrease in response to elevated C{sub a}, if any change is seen. This was indeed observed in the high nitrogen plots but for the low nitrogen a significant increase was found. Conclusions drawn from this project center around the implications of negative acclimation to future crop productivity. For instance, inter-specific differences in response to elevated C{sub a} may result in ecosystem changes and new management techniques may be necessary. However, real predictions cannot be made from leaf level studies alone as these may not represent the overall changes at the whole plant level.

  8. TRACG prediction of gravity-driven cooling system response in the SBWR/GIST facility LOCA tests

    Alamgir, M.; Andersen, J.G.M.; Yang, A.I.; Shiralkar, B.S.

    1990-01-01

    General Electric (BE) Nuclear Energy has initiated work on technology programs in support of the advanced light water reactor (ALWR) plants under contract to the U.S. Department of Energy (DOE). Work has been performed under the advanced boiling water reactor (ABWT) design verification program and the simplified boiling water reactor (SBWR) program. The objective of the SBWR program is to develop the key features of a simplified reactor design. The gravity-driven cooling system (GDCS) is an important feature of the SBWR design. The main objectives of the GDCS test program at GE were to demonstrate the technical feasibility of the GDCS concept by performing a section-scaled integrated systems test of the SBWR design and to provide a data base to qualify the TRACG computer code for use in SBWR accident analysis. This paper describes the qualification of TRACG for GDCS applications. The calculational capability and analytical models of TRACG are tested by performing assessment analysis for five loss-of-coolant-accident (LOCA) tests in the GDCS Integrated Systems Test (GIST) facility. The results of the qualification comparisons are presented and TRACG application ranges are discussed

  9. School Facilities and Sustainability-Related Concepts: A Study of Hellenic Secondary School Principals’, Teachers’, Pupils’ and Parents’ Responses

    Vasiliki Zepatou

    2016-03-01

    Full Text Available Effective building environment sustainability frameworks and practices need to take users’ opinions into account. For this purpose, a survey questionnaire was developed and the “Panhellenic survey of school spaces, materials and environmental-comfort conditions in secondary schools and perceptions, stances and attitudes of pupils, teachers, principals and parents towards sustainable construction and the selection and use of materials in schools that are friendly to the environment and human health” was conducted nationwide with a random stratified sample of 170 Hellenic public secondary schools. Selected findings are presented and discussed here. These show that existing school facilities are primarily rated as good and that selection and use of materials friendly to the environment and human health are extremely important. User groups believe that they should participate in planning/selecting sustainable solutions for schools. An Index of 10 School Environment Desired Outcomes associated with environmentally friendly and health-friendly materials selection and use was devised. Relevant factors were extracted and interpreted. The research establishes users’ subjective opinions that may be considered and integrated into procedures for improving school buildings, assessing and selecting environmentally friendly materials and implementing strategies for sustainable school design, building and operation.

  10. Hanford Facility contingency plan

    Sutton, L.N.; Miskho, A.G.; Brunke, R.C.

    1993-10-01

    The Hanford Facility Contingency Plan, together with each TSD unit-specific contingency plan, meets the WAC 173-303 requirements for a contingency plan. This plan includes descriptions of responses to a nonradiological hazardous materials spill or release at Hanford Facility locations not covered by TSD unit-specific contingency plans or building emergency plans. This plan includes descriptions of responses for spills or releases as a result of transportation activities, movement of materials, packaging, and storage of hazardous materials

  11. Social responsibility at a semi-industrial irradiation plant. Experience statements of ISO 26000 implementation in a nuclear facility class I

    Docters, Andrea S.; Lucuix, Maria B.

    2009-01-01

    This presentation is located in the area of radioisotopes and radiation, CNEA. Its main scope is to describe the implementation process of the international standard ISO 26000 at an irradiation facility. This project began as such by the end of 2007 with the objectives established at the Semi-Industrial Irradiation Facility ('Planta de Irradiacion Semi-Industrial'), and it consists on establishing a systematization practice and the subsequent diffusion of its results in order to spread the experience gained. The proposed standard has seven fundamental principles which gather under the term social responsibility. This project was agreed with stake holders directly involved with the facility and it is a continuum of interrelated knowledge. The fact of starting the implementation of this international standard in a relevant facility was meant to be applied in a central activity of the CNEA. The Semi-Industrial Irradiation Facility located at the Ezeiza Atomic Center has the necessary elements for its implementation and will provide after completion of the project, information of interest in order to replicate the experience in other areas. In the case of ISO 26000 the established order is considered appropriate for its application in the same government organization 'to contribute to sustainable development, health and welfare of society'. The concept of Social Responsibility, which ends its consolidation in the nineties, is a conjunction of knowledge and developments. The idea of sustainable development-oriented concept nurtured the current concern especially about the environment, linked to the Brundtland Commission Report of the late eighties which was later accepted by the Earth Summit at Rio de Janeiro in 1992. Meanwhile, the unions through their representatives played a pivotal role in linking the environment to the social perspective and interest to society, widely accepted nowadays, on the concept that appropriate measures for the environment can be extended

  12. Facility transition instruction

    Morton, M.R.

    1997-01-01

    The Bechtel Hanford, Inc. facility transition instruction was initiated in response to the need for a common, streamlined process for facility transitions and to capture the knowledge and experience that has accumulated over the last few years. The instruction serves as an educational resource and defines the process for transitioning facilities to long-term surveillance and maintenance (S and M). Generally, these facilities do not have identified operations missions and must be transitioned from operational status to a safe and stable configuration for long-term S and M. The instruction can be applied to a wide range of facilities--from process canyon complexes like the Plutonium Uranium Extraction Facility or B Plant, to stand-alone, lower hazard facilities like the 242B/BL facility. The facility transition process is implemented (under the direction of the US Department of Energy, Richland Operations Office [RL] Assistant Manager-Environmental) by Bechtel Hanford, Inc. management, with input and interaction with the appropriate RL division and Hanford site contractors as noted in the instruction. The application of the steps identified herein and the early participation of all organizations involved are expected to provide a cost-effective, safe, and smooth transition from operational status to deactivation and S and M for a wide range of Hanford Site facilities

  13. Dose-response relationship of dicentric chromosomes in human lymphocytes obtained for the fission neutron therapy facility MEDAPP at the research reactor FRM II.

    Schmid, E; Wagner, F M; Romm, H; Walsh, L; Roos, H

    2009-02-01

    The biological effectiveness of neutrons from the neutron therapy facility MEDAPP (mean neutron energy 1.9 MeV) at the new research reactor FRM II at Garching, Germany, has been analyzed, at different depths in a polyethylene phantom. Whole blood samples were exposed to the MEDAPP beam in special irradiation chambers to total doses of 0.14-3.52 Gy at 2-cm depth, and 0.18-3.04 Gy at 6-cm depth of the phantom. The neutron and gamma-ray absorbed dose rates were measured to be 0.55 Gy min(-1) and 0.27 Gy min(-1) at 2-cm depth, while they were 0.28 and 0.25 Gy min(-1) at 6-cm depth. Although the irradiation conditions at the MEDAPP beam and the RENT beam of the former FRM I research reactor were not identical, neutrons from both facilities gave a similar linear-quadratic dose-response relationship for dicentric chromosomes at a depth of 2 cm. Different dose-response curves for dicentrics were obtained for the MEDAPP beam at 2 and 6 cm depth, suggesting a significantly lower biological effectiveness of the radiation with increasing depth. No obvious differences in the dose-response curves for dicentric chromosomes estimated under interactive or additive prediction between neutrons or gamma-rays and the experimentally obtained dose-response curves could be determined. Relative to (60)Co gamma-rays, the values for the relative biological effectiveness at the MEDAPP beam decrease from 5.9 at 0.14 Gy to 1.6 at 3.52 Gy at 2-cm depth, and from 4.1 at 0.18 Gy to 1.5 at 3.04 Gy at 6-cm depth. Using the best possible conditions of consistency, i.e., using blood samples from the same donor and the same measurement techniques for about two decades, avoiding the inter-individual variations in sensitivity or the differences in methodology usually associated with inter-laboratory comparisons, a linear-quadratic dose-response relationship for the mixed neutron and gamma-ray MEDAPP field as well as for its fission neutron part was obtained. Therefore, the debate on whether the fission

  14. Waste Facilities

    Vermont Center for Geographic Information — This dataset was developed from the Vermont DEC's list of certified solid waste facilities. It includes facility name, contact information, and the materials...

  15. Health Facilities

    Health facilities are places that provide health care. They include hospitals, clinics, outpatient care centers, and specialized care centers, ... psychiatric care centers. When you choose a health facility, you might want to consider How close it ...

  16. Fabrication Facilities

    Federal Laboratory Consortium — The Fabrication Facilities are a direct result of years of testing support. Through years of experience, the three fabrication facilities (Fort Hood, Fort Lewis, and...

  17. A facile route to form self-carried redox-responsive vorinostat nanodrug for effective solid tumor therapy

    Han LQ

    2016-11-01

    Full Text Available Leiqiang Han, Tianqi Wang, Jingliang Wu, Xiaolan Yin, Hao Fang, Na Zhang School of Pharmaceutical Science, Shandong University, Ji’nan, Shandong, People’s Republic of China Abstract: Small molecule-based nanodrugs with nanoparticles (NPs that are mainly composed of small molecules, have been considered as a promising candidate for a next-generation nanodrug, owing to their unique properties. Vorinostat (SAHA is a canonical US Food and Drug Administration-approved histone deacetylase (HDAC inhibitor for the treatment of cutaneous T-cell lymphoma. However, the lack of efficacy against solid tumors hinders its progress in clinical use. Herein, a novel nanodrug of SAHA was developed based on disulfide-linked prodrug SAHA-S-S-VE. SAHA-S-S-VE could self-assemble into 148 nm NPs by disulfide-induced mechanisms, which were validated by molecular dynamics simulations. Under reduced conditions, the redox-responsive behavior of SAHA-S-S-VE was investigated, and the HDAC inhibition results verified the efficient release of free SAHA. With a biocompatible d-a-tocopheryl polyethylene glycol succinate (TPGS functionalization, the SAHA-S-S-VE/TPGS NPs exhibited low critical aggregation concentration of 4.5 µM and outstanding stability in vitro with drug-loading capacity of 24%. In vitro biological assessment indicated that SAHA-S-S-VE/TPGS NPs had significant anticancer activity against HepG2. Further in vivo evaluation demonstrated that the resulting NPs could be accumulated in the tumor region and inhibit the tumor growth effectively. This approach, which turned SAHA into a self-assembled redox-responsive nanodrug, provided a new channel for the use of HDAC inhibitor in solid tumor therapy. Keywords: SAHA, HDAC, small molecule, nanoparticles, self-assemble, disulfide bond

  18. S. 1462: This Act may be cited as the Federal Nuclear Facilities Environmental Response Act. Introduced in the Senate of the United States, One Hundredth First Congress, First Session, August 1, 1989

    Anon.

    1989-01-01

    S. 1462 is a bill to create a Federal nuclear facility environmental response fund, to create and Office of Environmental Management and Remedial Action, to require the Secretary of Energy and the Administrator of the Environmental Protection Agency to cooperate with affected States and Indian tribes, to provide for research and development to address environmental problems at Federal nuclear facilities, and for other purposes. The basic purpose of the act is to provide and adequate, long-term source of funding for environmental restoration, decontamination, decommissioning, and management of Federal nuclear facilities and sites

  19. Positive and negative emotional responses to workrelated trauma of intensive care nurses in private health care facilities

    Diane Elkonin

    2011-04-01

    Opsomming Intensiewesorgverpleging is ‘n stresvolle beroep en verpleegsters word gedurig aan beide primêre en sekondêre trauma blootgestel. Reaksie hierop kan óf positief wees, in die vorm van empatie-tevredenheid, óf negatief, in die vorm van empatie-uitputting. Verpleegsters is egter geneig om die negatiewe impak van sekondêre trauma te ontken,wat gevolglik tot stilswye en uitbranding kan lei. Hierdie artikel ondersoek en beskryf die teenwoordigheid en verwantskap tussen hierdie emosies. ‘n Kwantitatiewe benadering met ‘n nie-waarskynlikheidsteekproefmetode is gebruik. Die steekproef het bestaan uit 30 geregistreerde verpleegsters wat in privaat-intensiewesorgeenhede in Oos-Londen in die Oos-Kaap werk. Data is met behulp van die vierde hersiening van die ’Professional Quality of Life Scale: Compassion Satisfaction and Fatigue Subscales’ en die ’Silencing Response Scale’ingevorder en verwerk met verwysing na beskrywende statistieke en korrelasiekoëffisiente. Die resultate dui op ‘n hoë risiko vir empatie-uitputting, ‘n matige risiko vir uitbranding en die stilswye-reaksie, sowel as ‘n matige potensiaal vir empatie-tevredenheid. ‘n Beduidende negatiewe verwantskap blyk tussen empatie-tevredenheid en uitbranding te bestaan, terwyl ‘n aansienlik positiewe verwantskap tussen empatie-uitputting en uitbranding en empatieuitputting en die stilswye-reaksie bestaan.

  20. Integrating NEPA (National Environmental Policy Act) and CERCLA (Comprehensive Environmental Response, Compensation, and Liability Act) requirements during remedial responses at DOE facilities

    Levine, M.B.; Smith, E.D.; Sharples, F.E.; Eddlemon, G.K.

    1990-07-01

    US Department of Energy (DOE) Order 5400.4, issued October 6, 1989, calls for integrating the requirements of the National Environmental Policy Act (NEPA) with those of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) for DOE remedial actions under CERCLA. CERCLA requires that decisions on site remediation be made through a formal process called a Remedial Investigation/Feasibility Study (RI/FS). According to the DOE order, integration is to be accomplished by conducting the NEPA and CERCLA environmental planning and review procedures concurrently. The primary instrument for integrating the processes is to be the RI/FS process, which will be supplemented as needed to meet the procedural and documentational requirements of NEPA. The final product of the integrated process will be a single, integrated set of documents; namely, an RI report and an FS-EIS that satisfy the requirements of both NEPA and CERCLA. The contents of the report include (1) an overview and comparison of the requirements of the two processes; (2) descriptions of the major tasks included in the integrated RI/FS-EIS process; (3) recommended contents for integrated RI/FS-EIS documents; and (4)a discussion of some potential problems in integrating NEPA and CERCLA that fall outisde the scope of the RI/FS-EIS process, with suggestions for resolving some of these problems. 15 refs.

  1. Integrating NEPA [National Environmental Policy Act] and CERCLA [Comprehensive Environmental Response, Compensation, and Liability Act] requirements during remedial responses at DOE facilities

    Levine, M.B.; Smith, E.D.; Sharples, F.E.; Eddlemon, G.K.

    1990-07-01

    US Department of Energy (DOE) Order 5400.4, issued October 6, 1989, calls for integrating the requirements of the National Environmental Policy Act (NEPA) with those of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) for DOE remedial actions under CERCLA. CERCLA requires that decisions on site remediation be made through a formal process called a Remedial Investigation/Feasibility Study (RI/FS). According to the DOE order, integration is to be accomplished by conducting the NEPA and CERCLA environmental planning and review procedures concurrently. The primary instrument for integrating the processes is to be the RI/FS process, which will be supplemented as needed to meet the procedural and documentational requirements of NEPA. The final product of the integrated process will be a single, integrated set of documents; namely, an RI report and an FS-EIS that satisfy the requirements of both NEPA and CERCLA. The contents of the report include (1) an overview and comparison of the requirements of the two processes; (2) descriptions of the major tasks included in the integrated RI/FS-EIS process; (3) recommended contents for integrated RI/FS-EIS documents; and (4)a discussion of some potential problems in integrating NEPA and CERCLA that fall outisde the scope of the RI/FS-EIS process, with suggestions for resolving some of these problems. 15 refs

  2. Animal facilities

    Fritz, T.E.; Angerman, J.M.; Keenan, W.G.; Linsley, J.G.; Poole, C.M.; Sallese, A.; Simkins, R.C.; Tolle, D.

    1981-01-01

    The animal facilities in the Division are described. They consist of kennels, animal rooms, service areas, and technical areas (examining rooms, operating rooms, pathology labs, x-ray rooms, and 60 Co exposure facilities). The computer support facility is also described. The advent of the Conversational Monitor System at Argonne has launched a new effort to set up conversational computing and graphics software for users. The existing LS-11 data acquisition systems have been further enhanced and expanded. The divisional radiation facilities include a number of gamma, neutron, and x-ray radiation sources with accompanying areas for related equipment. There are five 60 Co irradiation facilities; a research reactor, Janus, is a source for fission-spectrum neutrons; two other neutron sources in the Chicago area are also available to the staff for cell biology studies. The electron microscope facilities are also described

  3. So you want to be a high-tech entrepreneur?

    Jeavons, Alan Paul

    2000-01-01

    It is only natural to dream of commercial success for new technology. Unfortunately, a technological break-through is usually only a first small step on the commercial road that has many roadwork and accident black-spots and certainly no "cones-hotline". Drawing on his experience of ten years at CERN followed by fifteen years building Oxford Positron Systems, the speaker will revisit the highway traveled in bringing his HIDAC (HIgh Density Avalanche Chamber) technology to market for digital radiography and positron emission tomography. Particular reference will be made to the personal experiences involved in transferring technology from multinational laboratory to small entrepreneurial company.

  4. Interorganizational imitation and acquisitions of high-tech ventures

    Ozmel, Umit; Reuer, J. J.; Wu, Cheng-Wei

    2017-01-01

    Research summary: This article shows that there is a positive association between the changes in the number of prior acquisitions or the changes in the prominence of prior acquirers within the focal venture's subfield and the venture's likelihood to be acquired. Results are in line with the existence of frequency- and trait-based imitation in acquisitions targeting tech ventures. More importantly, these positive associations are more pronounced when (a) exogenous technological uncertainty wit...

  5. The High-Tech Face of e-Health

    Shiers, Jamie D

    2014-01-01

    This chapter focuses on the current and potential use of e-Infrastructures in the domain of eHealth. It starts by identifying a small number of specific Use Cases and then addresses how these can be optimized—or possibly revolutionized—by the use of state-of-the-art distributing computing infrastructures (DCIs). Specific topics that are addressed include “long-term” data preservation (for the duration of a patient’s life as well as (far) beyond for collective-oriented studies), federation of heterogeneous data sources, provision of redundant and highly accessible data storage and federated identity management. The work draws heavily on the author’s experience in distributed computing infrastructures to address the challenges of the Large Hadron Collider at CERN, together with participation in generic e-Infrastructure projects, such as the EGEE project services and EGI. It also benefits from experience in hadron-therapy oriented projects with which CERN has synergies both as an accelerator laborato...

  6. Human Aspects of High Tech in Special Libraries.

    Bichteler, Julie

    1986-01-01

    This investigation of library employees who spend significant portion of time in online computer interaction provides information on intellectual, psychological, social, and physical aspects of their work. Long- and short-term effects of special libraries are identified and solutions to "technostress" problems are suggested. (16…

  7. High Tech Decision Making in the Airpower Age

    1995-05-01

    Note (About Question 1): Current World "All possible question(issues) for further breakup" Break up of the former Soviet Union Megatrends ...nukes, chemical & biological weapons) - also delivery vehicles (for sale on the open market) - advanced conventional weaponry - active/passive...costly to enemy in terms of rebuilding infrastructure, equipment -need to develop countermeasure -may violate the Biological Weapons convention

  8. Opportunities for optics within high-tech of tomorrow

    Hanson, Steen Grüner; Jakobsen, Michael Linde; Iversen, Theis F. Q.

    2011-01-01

    The use of miniaturized optical sensors as input devices based on speckle phenomena will be discussed alongside with some considerations on the path to industrial implementation.......The use of miniaturized optical sensors as input devices based on speckle phenomena will be discussed alongside with some considerations on the path to industrial implementation....

  9. New and Improved: Security Goes High-Tech.

    Gamble, Cheryl

    2002-01-01

    Explains the technology of biometrics, the science of identifying a person by unique physical characteristics, and its application in the fight against terrorism. Argues that biometrics, such as hand readers, fingerprint readers, and eye scans, are reliable and efficient. Also describes proximity cards, digital tracking systems, and smart cards.…

  10. Pathways to High-tech Valleys and Research Triangles

    Hulsink, W.; Dons, H.

    2008-01-01

    Silicon Valley and the industrial districts of Italy, where shared identity, superior skills, regional specialization and trust-based networking among local firms have produced dynamic and flexible ecosystems, are inspiring examples of the successful promotion of thriving technology and business

  11. A High-Tech Makeover for School Music

    Marowitz, David R.

    2011-01-01

    Because people today are accustomed to listening to electronic instruments, school music ensembles need to rise to the challenge of reflecting present-day culture by doing a "contemporary makeover". This is all-important if ensembles are to command student respect and attract new members. With a creative mindset and openness to innovation, one can…

  12. High-Tech Service Unlocks Books for Pupils

    Shah, Nirvi

    2011-01-01

    This article features Bookshare, a nonprofit that provides free electronic copies of traditional books to students with certain disabilities. Inspired by Napster, the music-sharing service, Bookshare turns books into a format that can be read aloud by computers, magnified, and spaced differently so that students with vision problems or learning…

  13. The "Virtual" Reality of High-Tech Training

    Justice, Jamie

    2004-01-01

    Community and technical colleges are at a crossroads in their history and mission in preparing individuals for the challenges of lifelong learning and the workforce of the future. Many industries are faced with the challenges of replacing an aging and retiring workforce, updating employee skill sets, and maintaining quality and production…

  14. Opportunities for optics within tomorrow’s high-tech

    Hanson, Steen Grüner

    The use of miniaturized optical sensors as input devices based on speckle phenomena will be discussed alongside with some considerations on the path to industrial implementation. Based on two examples from the field of cursor control systems, the future opportunities for dissemination into indust...

  15. The High-Tech Surge. Focus on Careers.

    Vo, Chuong-Dai Hong

    1996-01-01

    The computer industry is growing at a phenomenal rate as technology advances and prices fall, stimulating unprecedented demand from business, government, and individuals. Higher levels of education will be the key to securing employment as organizations increasingly rely on sophisticated technology. (Author)

  16. LAUNCHING EFFORTS NEEDED FOR A HIGH-TECH PRODUCT

    Lavinia DOVLEAC

    2011-01-01

    Full Text Available This paper aims the difficult problem of creating new product concepts in thearea of high-technology and innovation. Because of scientific discoveries andimpressive development of technology, many companies compete for marketsupremacy on the technological innovations market. In a global market,which is currently in an economic and financial crisis, consumers make a newhierarchy of priorities in terms of expenditure and consumption. Therefore,companies that create new products must be very careful about 2 aspects,so the new product may not become a failure: the products positioning on themarket and the target group which they address to. This paper belongs to themarketing area by bringing into discussion theoretical concepts, by analyzingthe stages crossed by a company in the process of launching a new hightechproduct and crossing the abyss in the product adoption process byconsumers.

  17. Online Classes See Cheating Go High-Tech

    Young, Jeffrey R.

    2012-01-01

    Easy A's may be even easier to score these days, with the growing popularity of online courses. Tech-savvy students are finding ways to cheat that let them ace online courses with minimal effort, in ways that are difficult to detect. The issue of online cheating may rise in prominence, as more and more institutions embrace online courses, and as…

  18. The human factor in high-tech plant operation

    Grassani, E

    1988-02-01

    The article develops a series of considerations on reliability standards applied to operators of technologically complex industrial installations. From research conducted within the field of cognitive psychology, significant indications are emerging relative to professional training within industry, as well as to the functional and human interface characteristics of automated control systems. Recent tragic incidents (Three Mile Island nuclear power plant, Bopal methyl isocynate storage, Mexico City petroleum tank farm and Chernobylsk-4 reactor) have evidenced the greater weight that should be given to human factors in plant safety and reliability assessments and planning.

  19. Come and Try out our High-Tech Products

    FI Department

    2008-01-01

    Since 1977, GMP has been active in the fields of lasers, spectroscopy, electro-optics and micro-positioning. Its mission is to act as a link between suppliers and users of high-technology products. On Thursday 27 November 2008, between 10.00 a.m. and 12.00 a.m., come and discover our new positioning, spectroscopy and laser products in Room 60-2-016 – Main Building. Our specialist engineer will be on hand to answer all your questions. An aperitif will be served at the end of the presentation. Contact: GMP SA Raffael Favaretto Ing. microtech. dipl. EPF Av. des Baumettes 17 CH-1020 Renens / SWITZERLAND Phone : +41 21 633 21 21 Direct : +41 21 633 21 27 Fax : +41 21 633 21 29 raffael.favaretto@gmp.ch http://www.gmp.ch

  20. Come and Try out our High-Tech Products

    FI Department

    2008-01-01

    Since 1977, GMP has been active in the fields of lasers, spectroscopy, electro-optics and micro-positioning. Its mission is to act as a link between suppliers and users of high-technology products. On Thursday 27 November 2008, between 10.00 a.m. and 12.00 a.m. come and discover our new positioning, spectroscopy and laser products in Room 60-2-016 – Main Building. Our specialist engineer will be on hand to answer all your questions. An aperitif will be served at the end of the presentation. Contact: GMP SA Raffael Favaretto Ing. microtech. dipl. EPF Av. des Baumettes 17 CH-1020 Renens / SWITZERLAND Phone : +41 21 633 21 21 Direct : +41 21 633 21 27 Fax : +41 21 633 21 29 mailto:raffael.favaretto@gmp.ch http://www.gmp.ch

  1. Asynchronous Learning Sources in a High-Tech Organization

    Bouhnik, Dan; Giat, Yahel; Sanderovitch, Yafit

    2009-01-01

    Purpose: The purpose of this study is to characterize learning from asynchronous sources among research and development (R&D) personnel. It aims to examine four aspects of asynchronous source learning: employee preferences regarding self-learning; extent of source usage; employee satisfaction with these sources and the effect of the sources on the…

  2. Synthetic fiber technology evolving into a high-tech field

    Yumura, Takao

    1988-07-01

    This paper reports the trend of synthetic fiber technology. Representative synthetic fibers are nylon, polyester, and acrylic. Researchers are studying the continuation of polymerization processes, high-efficiency catalysts, thin-film polymerization, the possibility of energy saving by interfacial polymerization, and small quantities of a large variety of items method. They are making considerable progress in accelerating, simplifying, and rationalizing production processes. As a result, they have already omitted the elongation chamber and realized the continuation of spinning and elongation processes. The textile industry is planning to adopt a super-fast spinning system. To meet customers' needs for a wider variety of advanced materials, researchers are developing differential, high-value-added materials. High functions are added to fibers during all processes including polymerization, spinning, thread or cotton making, knitting, and after-treatment. Researchers have developed new materials looking exactly like silk or wool, having aesthetic properties, artificial suede, and combining moisture permeability and waterproofness. New materials developed for high-technology purposes include carbon fiber, aramid fiber that obtains high strength and elasticity without being elongated, high-strength, and high-elasticity super-high-polymer polyethylene fiber. (3 figs, 1 tab)

  3. Intellectual property issues in holography and high tech

    Reingand, Nadya

    2004-06-01

    The author with technical education background (Ph.D. in holography) shares her 3+ years of experience working on intellectual property (IP) issues that includes patents, trademarks, and copyrights. A special attention is paid to the patent issues: the application procedure, the patent requirements, the databases for prior art search, how to make the cost efficient filing.

  4. Corporate Turnarounds in the High-tech Industry in UK

    Xiao, Haixia

    2009-01-01

    Prior research on corporate turnaround relates to those organizations that have managed to move from poor performance to high performance within a relatively short time period by a case-study approach. The study also explores the role of leadership as a key factor in making turnaround successful as characterized by the change in CEO and in the board of directors. Finally, it explores the incentive systems of those firms during the turnaround. This study analyzed six public companies whic...

  5. Strategic planning decisions in the high tech industry

    Daim, Tugrul; Beyhan, Berna; Basoglu, Nuri

    2013-01-01

    The scale and complexity of research and practices of open innovation mandate a correspondingly sophisticated form of decision making. Strategic Planning Decisions brings together a number of tools that ease the decision process in technology companies, providing both conceptual frameworks and practical applications. Innovative approaches are presented such as an ontology-based model where all the relevant aspects of a potential technology are interrelated to provide a comprehensive and logically connected data pool for decision makers. Divided into two sections, Strategic Planning Decisions describe both strategic approaches using the decision tools, and tactical approaches. Some of these tools are expanded while some others are embedded in a model that will lay the ground for practical application. These include: ·         bibliometric analysis, ·         ontology, ·         roadmapping, ·         lead user, six sigma, and ·         multi-actor & multi-object...

  6. High Tech Training at Arthur Andersen and Co.

    Dennis, Verl E.

    1984-01-01

    Discusses Arthur Andersen and Company's reasons for using high technology in job training, including its ability to improve productivity, provide training on demand, reduce training costs, and keep educational quality consistent. A Life Cycle Model which is used to integrate high technology into this accounting company's educational programs is…

  7. The Robots Are Coming! Training Tomorrow's High-Tech Workers.

    Zemke, Ron

    1983-01-01

    The United States, running second to Japan in the robot race, is employing 19 percent of the world's robots. This article presents six classes of robots that were defined by the Japanese trade association. All are multifunctional, equipped with a memory device, capable of rotation, and able to replace human workers. (SSH)

  8. The High Tech, Human Touch Magazine : 2014 Edition

    Boon, Mieke; de Boer, Ryanne; van den Bosch, Pieter; van Dijk, Wouter; Kikidis, Savvas; van Laar, Ruud; van Leersum, Karin; Luyt, Joris; Mpuan, Binipom; Versluijs, Wouter; Vlachos, Dimitrios; van der Vlugt, Niels

    2014-01-01

    For the course Technolab in the master program Philosophy of Science, Technology, and Society, supervised by prof.dr.ir. M. Boon, we were assigned to write a magazine that covers three different research projects within the University of Twente. In the magazine, we examined the technological,

  9. High tech supply chain simulation based on dynamical systems model

    Yuan, X.; Ashayeri, J.

    2013-01-01

    During the last 45 years, system dynamics as a continuous type of simulation has been used for simulating various problems, ranging from economic to engineering and managerial when limited (historical) information is available. Control theory is another alternative for continuous simulation that

  10. Ethical Issues Encountered by Families in a High Tech Society.

    Inana, Marjorie

    Until recently, technological advancement was an unquestioned societal goal. Today, however, controversy and public debate are beginning to arise over a wide variety of technologies, their development, and their use. As certain aspects of technology begin to be perceived as a possible threat to our health, privacy, environment, and safety,…

  11. High-tech controls for energy and environment. Proceedings

    Biondo, S.J. [ed.] [USDOE, Washington, DC (United States); Drummond, C.J. [ed.] [USDOE Pittsburgh Energy Technology Center, PA (United States)

    1995-05-01

    This document contains reports which were presented at a symposium for adaptive control systems. Topics were concerned with fuzzy logic, genetic algorithms, adaptive processes control, nonlinear component analysis, and processes control and efficiency applied to reducing nitrogen oxides emissions and to a column flotation unit. Individual reports (22 reports) are processed separately for the data bases.

  12. Model order reduction for complex high-tech systems

    Lutowska, A.; Hochstenbach, M.E.; Schilders, W.H.A.; Michielsen, B.; Poirier, J.R.

    2012-01-01

    This paper presents a computationally efficient model order reduction (MOR) technique for interconnected systems. This MOR technique preserves block structures and zero blocks and exploits separate MOR approximations for the individual sub-systems in combination with low rank approximations for the

  13. Asian high tech streamlines traditional industry | CRDI - Centre de ...

    control systems and to make them affordable to small enterprises. Today, Eutech is a multinational provider of business services such as building management, workflow solutions, web publishing, and hospital information systems.

  14. High hopes for high tech | IDRC - International Development ...

    2011-01-28

    Jan 28, 2011 ... English · Français ... it's appropriate that Michael Clarke's first journey abroad as the new ... After earning a BSc in biology in Canada, he left to teach high ... as broadband networks so that the benefits of ICTs become more ...

  15. Asian high tech streamlines traditional industry | IDRC - International ...

    2010-10-28

    Oct 28, 2010 ... "Synapse, our software monitoring system, optimizes the process by monitoring temperatures," explains Gunasingham. ... workflow solutions, web publishing, and hospital information systems. ... IDRC Digital Library

  16. High-Tech School Bus Teaches Students on the Road

    Katims, Lauren

    2011-01-01

    Last year, kindergarten through high school students in the rural Hector, Arkansas, School District barely had the technology resources that keep kids interested in math and science. This year, they potentially have the most advanced resources in the country--before they even step into the classroom. One school bus in Arkansas' Pope County has…

  17. Patterns of interactive learning in a high tech region

    Meeus, M.T.H.; Oerlemans, L.A.G.; Hage, J.

    2001-01-01

    This paper aims at developing a theoretical framework that explains levels of interactive learning. Interactive learning is defined as the exchange and sharing of knowledge resources conducive to innovation between an innovator firm, its suppliers, and/or its customers. Our research question is: Why

  18. When Are High-Tech Communicators Effective in Parkinson's Disease?

    Ferriero, Giorgio; Caligari, Marco; Ronconi, Gianpaolo; Franchignoni, Franco

    2012-01-01

    This report describes a 63-year-old woman with Parkinson's disease showing loss of intelligibility of speech and severely impaired handwriting, despite undergoing physical and speech therapies. As the patient had sufficient residual motor abilities and adequate cognitive function and motivation, a computer-based communication aid with a software…

  19. Facilities Programming.

    Bullis, Robert V.

    1992-01-01

    A procedure for physical facilities management written 17 years ago is still worth following today. Each of the steps outlined for planning, organizing, directing, controlling, and evaluating must be accomplished if school facilities are to be properly planned and constructed. However, lessons have been learned about energy consumption and proper…

  20. Nuclear facilities

    Anon.

    2000-01-01

    Here is given the decree (2000-1065) of the 25. of October 2000 reporting the publication of the convention between the Government of the French Republic and the CERN concerning the safety of the LHC (Large Hadron Collider) and the SPS (Proton Supersynchrotron) facilities, signed in Geneva on July 11, 2000. By this convention, the CERN undertakes to ensure the safety of the LHC and SPS facilities and those of the operations of the LEP decommissioning. The French legislation and regulations on basic nuclear facilities (concerning more particularly the protection against ionizing radiations, the protection of the environment and the safety of facilities) and those which could be decided later on apply to the LHC, SPS and auxiliary facilities. (O.M.)

  1. Correlation of horizontal and vertical components of strong ground motion for response-history analysis of safety-related nuclear facilities

    Huang, Yin-Nan, E-mail: ynhuang@ntu.edu.tw [Dept. of Civil Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Rd., Taipei 10617, Taiwan (China); Yen, Wen-Yi, E-mail: b01501059@ntu.edu.tw [Dept. of Civil Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Rd., Taipei 10617, Taiwan (China); Whittaker, Andrew S., E-mail: awhittak@buffalo.edu [Dept. of Civil, Structural and Environmental Engineering, MCEER, State University of New York at Buffalo, Buffalo, NY 14260 (United States)

    2016-12-15

    Highlights: • The correlation of components of ground motion is studied using 1689 sets of records. • The data support an upper bound of 0.3 on the correlation coefficient. • The data support the related requirement in the upcoming edition of ASCE Standard 4. - Abstract: Design standards for safety-related nuclear facilities such as ASCE Standard 4-98 and ASCE Standard 43-05 require the correlation coefficient for two orthogonal components of ground motions for response-history analysis to be less than 0.3. The technical basis of this requirement was developed by Hadjian three decades ago using 50 pairs of recorded ground motions that were available at that time. In this study, correlation coefficients for (1) two horizontal components, and (2) the vertical component and one horizontal component, of a set of ground motions are computed using records from a ground-motion database compiled recently for large-magnitude shallow crustal earthquakes. The impact of the orientation of the orthogonal horizontal components on the correlation coefficient of ground motions is discussed. The rules in the forthcoming edition of ASCE Standard 4 for the correlation of components in a set of ground motions are shown to be reasonable.

  2. Experiences in planning and response for the radiological emergencies in a radioactive facility; Experiencias en la planificacion y respuesta para las emergencias radiologicas en una instalacion radiactiva

    Amador B, Z.H.; Perez P, S.; Torres B, M.B.; Ayra P, F.E. [Centro de Isotopos, Ave. Monumental y Carretera La Rada, Km. 3, Guanabacoa, Apartado 3415, Ciudad de La Habana (Cuba)]. e-mail: dsr@centis.edu.cu

    2006-07-01

    It is internationally recognized the importance of the planning and the assurance for the effective response to the radiological emergencies. In the work those experiences on this thematic one in the Isotopes Center (CENTIS), the radioactive facility where the biggest radioactive inventory is manipulated in Cuba are presented. Due to CENTIS is also the sender and main transport of radioactive materials, it is included this practice. The revision of the abnormal situations during the years 1997 at the 2005, starting from the classification adopted by the Regulatory Authority of the country is carried out. Its are register the details of these occurrences in the Radiological Events Database (BDSR). A correspondence among the radiological impact evaluated in the Emergency Plan for the possible events and that of the registered ones is obtained. The complete training programs and realization of the exercises are carried out. Those results of 3 mockeries made to full scale are picked up. It was concluded that the operational experience and the maintained infrastructure, determine the answer capacity for radiological emergencies in the CENTIS. (Author)

  3. NuSTAR calibration facility and multilayer reference database: Optic response model comparison to NuSTAR on-ground calibration data

    Brejnholt, Nicolai

    . To couple the as-coated multilayer to the actual optics, ray tracing is carried out in a detailed geometric model of the optic, including in-situ measured figure error for the mounted substrates. The effective area as a function of energy estimated from ray tracing is compared to NuSTAR on......The Nuclear Spectroscopic Telescope ARray (NuSTAR) is a NASA Small Explorer mission carrying the first focusing hard X-ray telescope (5 − 80 keV ) to orbit. NuSTAR is slated for launch in 2012. Through a leap in sensitivity, the realization of focusing optics holds promise of heralding in a golden...... the optic response for both on- and off-axis NuSTAR observations, detailed knowledge of the as-coated multilayer is required. The purpose of this thesis is to establish a multilayer reference database. As an integral part of this effort, a hard X-ray calibration facility was designed and constructed. Each...

  4. A facile and selective approach for enrichment of l-cysteine in human plasma sample based on zinc organic polymer: Optimization by response surface methodology.

    Bahrani, Sonia; Ghaedi, Mehrorang; Ostovan, Abbas; Javadian, Hamedreza; Mansoorkhani, Mohammad Javad Khoshnood; Taghipour, Tahere

    2018-02-05

    In this research, a facile and selective method was described to extract l-cysteine (l-Cys), an essential α-amino acid for anti-ageing playing an important role in human health, from human blood plasma sample. The importance of this research was the mild and time-consuming synthesis of zinc organic polymer (Zn-MOP) as an adsorbent and evaluation of its ability for efficient enrichment of l-Cys by ultrasound-assisted dispersive micro solid-phase extraction (UA-DMSPE) method. The structure of Zn-MOP was investigated by FT-IR, XRD and SEM. Analysis of variance (ANOVA) was applied for the experimental data to reach the best optimum conditions. The quantification of l-Cys was carried out by high performance liquid chromatography with UV detection set at λ=230nm. The calibration graph showed reasonable linear responses towards l-Cys concentrations in the range of 4.0-1000μg/L (r 2 =0.999) with low limit of detection (0.76μg/L, S/N=3) and RSD≤2.18 (n=3). The results revealed the applicability and high performance of this novel strategy in detecting trace l-Cys by Zn-MOP in complicated matrices. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Applicability of the two-angle differential method to response measurement of neutron-sensitive devices at the RCNP high-energy neutron facility

    Masuda, Akihiko, E-mail: aki-masuda@aist.go.jp [National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568 (Japan); Matsumoto, Tetsuro [National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568 (Japan); Iwamoto, Yosuke [Japan Atomic Energy Agency (JAEA), 2-4 Shirakata, Tokai, Naka, Ibaraki 319-1195 (Japan); Hagiwara, Masayuki [High Energy Accelerator Research Organization (KEK), 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Satoh, Daiki; Sato, Tatsuhiko [Japan Atomic Energy Agency (JAEA), 2-4 Shirakata, Tokai, Naka, Ibaraki 319-1195 (Japan); Iwase, Hiroshi [High Energy Accelerator Research Organization (KEK), 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Yashima, Hiroshi [Research Reactor Institute, Kyoto University, 2-1010 Asashiro-nishi, Kumatori, Sennan, Osaka 590-0494 (Japan); Nakane, Yoshihiro [Japan Atomic Energy Agency (JAEA), 2-4 Shirakata, Tokai, Naka, Ibaraki 319-1195 (Japan); Nishiyama, Jun [Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro, Tokyo 152-8550 (Japan); Shima, Tatsushi; Tamii, Atsushi; Hatanaka, Kichiji [Research Center for Nuclear Physics (RCNP), Osaka University, 10-1 Mihogaoka, Ibaraki, Osaka 567-0047 (Japan); Harano, Hideki [National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568 (Japan); Nakamura, Takashi [Cyclotron and Radioisotope Center (CYRIC), Tohoku University, 6-3 Aramaki, Aoba, Sendai, Miyagi 980-8578 (Japan)

    2017-03-21

    Quasi-monoenergetic high-energy neutron fields induced by {sup 7}Li(p,n) reactions are used for the response evaluation of neutron-sensitive devices. The quasi-monoenergetic high-energy field consists of high-energy monoenergetic peak neutrons and unwanted continuum neutrons down to the low-energy region. A two-angle differential method has been developed to compensate for the effect of the continuum neutrons in the response measurements. In this study, the two-angle differential method was demonstrated for Bonner sphere detectors, which are typical examples of moderator-based neutron-sensitive detectors, to investigate the method's applicability and its dependence on detector characteristics. Experiments were performed under 96–387 MeV quasi-monoenergetic high-energy neutron fields at the Research Center for Nuclear Physics (RCNP), Osaka University. The measurement results for large high-density polyethylene (HDPE) sphere detectors agreed well with Monte Carlo calculations, which verified the adequacy of the two-angle differential method. By contrast, discrepancies were observed in the results for small HDPE sphere detectors and metal-induced sphere detectors. The former indicated that detectors that are particularly sensitive to low-energy neutrons may be affected by penetrating neutrons owing to the geometrical features of the RCNP facility. The latter discrepancy could be consistently explained by a problem in the evaluated cross-section data for the metals used in the calculation. Through those discussions, the adequacy of the two-angle differential method was experimentally verified, and practical suggestions were made pertaining to this method.

  6. Mammography Facilities

    U.S. Department of Health & Human Services — The Mammography Facility Database is updated periodically based on information received from the four FDA-approved accreditation bodies: the American College of...

  7. Canyon Facilities

    Federal Laboratory Consortium — B Plant, T Plant, U Plant, PUREX, and REDOX (see their links) are the five facilities at Hanford where the original objective was plutonium removal from the uranium...

  8. High-risk facilities. Emergency management in nuclear, chemical and hazardous waste facilities

    Kloepfer, Michael

    2012-01-01

    The book on emergency management in high-risk facilities covers the following topics: Change in the nuclear policy, risk management of high-risk facilities as a constitutional problem - emergency management in nuclear facilities, operational mechanisms of risk control in nuclear facilities, regulatory surveillance responsibilities for nuclear facilities, operational mechanism of the risk control in chemical plants, regulatory surveillance responsibilities for chemical facilities, operational mechanisms of the risk control in hazardous waste facilities, regulatory surveillance responsibilities for hazardous waste facilities, civil law consequences in case of accidents in high-risk facilities, criminal prosecution in case of accidents in high-risk facilities, safety margins as site risk for emission protection facilities, national emergency management - strategic emergency management structures, warning and self-protection of the public in case of CBRN hazards including aspects of the psych-social emergency management.

  9. [Knowledge of the population about leading symptoms of cardiovascular emergencies and the responsibility and accessibility of medical facilities in emergencies : Results of the KZEN study in Western Palatinate].

    Luiz, T; Dittrich, S; Pollach, G; Madler, C

    2017-11-01

    The Westpfalz is a mainly rural region in the southwestern part of the German state of Rhineland-Palatinate with 527,000 inhabitants and demonstrates a higher than average cardiovascular mortality compared to the rest of Germany. The reasons are not known. Our study attempted to investigate whether significant deficits in knowledge of the population on cardiovascular emergencies, the accessibility of emergency medical services (EMS) or the different responsibilities and abilities of the medical facilities could be held responsible for this. These factors are of the utmost importance for the timely initiation and administration of curative therapeutic strategies. We conducted standardized telephone interviews with 1126 inhabitants of Westpfalz as a representative sample of the population in the study area. The interviewees were asked about demographic data, participation in first aid courses, knowledge of emergency telephone numbers and the different responsibilities of preclinical emergency physicians which are a part of the EMS and the doctor-on-call system for non-life-threatening conditions (ÄBD). Moreover, we asked about the leading symptoms of myocardial infarction and stroke. Finally, we enquired how the respondents would react in fictitious cardiovascular emergencies. Of the participants 651 (57.8%) were female and 475 (42.2%) male. The mean age in our study was 51 ± 18 years and 1002 of the participants (89%) had some formal first aid training. The current telephone number of the EMS system (112) was known to 29.5% of the interviewees and 15.4% could only recall the old number (19222) which is no longer in use. In the case of participants who gave the correct telephone number the first aid course took place 10 years ago (median), whereas for participants who did not know the correct number, the course dated back 15 years (median, p leading symptom of a myocardial infarction and 354 did not know a leading symptom (31.4%) of stroke. In the

  10. Response

    Higgins, Chris

    2012-01-01

    This article presents the author's response to the reviews of his book, "The Good Life of Teaching: An Ethics of Professional Practice." He begins by highlighting some of the main concerns of his book. He then offers a brief response, doing his best to address the main criticisms of his argument and noting where the four reviewers (Charlene…

  11. 33-GVA interrupter test facility

    Parsons, W.M.; Honig, E.M.; Warren, R.W.

    1979-01-01

    The use of commercial ac circuit breakers for dc switching operations requires that they be evaluated to determine their dc limitations. Two 2.4-GVA facilities have been constructed and used for this purpose at LASL during the last several years. In response to the increased demand on switching technology, a 33-GVA facility has been constructed. Novel features incorporated into this facility include (1) separate capacitive and cryogenic inductive energy storage systems, (2) fiber-optic controls and optically-coupled data links, and (3) digital data acquisition systems. Facility details and planned tests on an experimental rod-array vacuum interrupter are presented

  12. Hanford Surplus Facilities Program plan

    Hughes, M.C.; Wahlen, R.K.; Winship, R.A.

    1989-09-01

    The Hanford Surplus Facilities Program is responsible for the safe and cost-effective surveillance, maintenance, and decommissioning of surplus facilities at the Hanford Site. The management of these facilities requires a surveillance and maintenance program to keep them in a safe condition and development of a plan for ultimate disposition. Criteria used to evaluate each factor relative to decommissioning are based on the guidelines presented by the US Department of Energy-Richland Operations Office, Defense Facilities Decommissioning Program Office, and are consistent with the Westinghouse Hanford Company commitment to decommission the Hanford Site retired facilities in the safest and most cost-effective way achievable. This document outlines the plan for managing these facilities to the end of disposition

  13. GStudy on the Effect of Knowledge Management on the Research and Development of High-tech Enterprises and the Countermeasures --A case Study of S Company with High and New Technology%知识管理对高技术企业研发作用的影响与对策研究*--以高新技术企业S公司为例

    陈亮; 贾国柱; 孔继利; 司晓玲; 栾世超

    2016-01-01

    随着人类社会从工业经济时代进入到知识经济时代,传统的企业管理模式与管理观念已越来越不适应提升我国高技术企业核心竞争力的战略举措。文中正是基于上述现实与理论背景,以实际案例S公司为例,通过调研客户与内部研发人员反映的问题与需求的角度,探讨影响高技术企业S公司发展的外在因素与内在动力,然后以知识管理的视角对公司的成长背景、业务流程、内在动力和组织绩效进行分析,有针对性的提出该公司研发模式、内部沟通机制、组织架构、知识资本管理及保障机制等方面的策略和方法,以期能丰富知识管理应用到企业成长理论及针对性的实施,为高新技术企业建立促进组织知识增长、持续的核心价值和竞争优势提供建议性参考。%With the human society stepping from the industrial economy era into the knowledge one, the traditional enterprise management modes and management concepts have become more and more inadequate for the strategic initiatives of enhancing the core competitiveness of China's high-tech enterprises. Just based on the above reality and theoretical background, this paper, , taking S company as an example and through surveying the problems and demands reflected by customers and the internal R & D personnel, explores the external factors and internal motivations that affect the development of the high-tech S company, and then analyzes the company's growth background, business process, internal power and organizational performance from the knowledge management perspective and puts forward some targeted strategies and methods for the company's R & D mode, internal communication mechanism, organizational structure, knowledge capital management and protection mechanism. This paper aims at enriching the theory of applying the knowledge management in the company growth and the targeted implementation, and providing a suggested

  14. Support facilities

    Williamson, F.S.; Blomquist, J.A.; Fox, C.A.

    1977-01-01

    Computer support is centered on the Remote Access Data Station (RADS), which is equipped with a 1000 lpm printer, 1000 cpm reader, and a 300 cps paper tape reader with 500-foot spools. The RADS is located in a data preparation room with four 029 key punches (two of which interpret), a storage vault for archival magnetic tapes, card files, and a 30 cps interactive terminal principally used for job inquiry and routing. An adjacent room provides work space for users, with a documentation library and a consultant's office, plus file storage for programs and their documentations. The facility has approximately 2,600 square feet of working laboratory space, and includes two fully equipped photographic darkrooms, sectioning and autoradiographic facilities, six microscope cubicles, and five transmission electron microscopes and one Cambridge scanning electron microscope equipped with an x-ray energy dispersive analytical system. Ancillary specimen preparative equipment includes vacuum evaporators, freeze-drying and freeze-etching equipment, ultramicrotomes, and assorted photographic and light microscopic equipment. The extensive physical plant of the animal facilities includes provisions for holding all species of laboratory animals under controlled conditions of temperature, humidity, and lighting. More than forty rooms are available for studies of the smaller species. These have a potential capacity of more than 75,000 mice, or smaller numbers of larger species and those requiring special housing arrangements. There are also six dog kennels to accommodate approximately 750 dogs housed in runs that consist of heated indoor compartments and outdoor exercise areas

  15. Dynamic lighting systems in psychogeriatric care facilities in the Netherlands : a quantitative and qualitative analysis of stakeholders’ responses and applied technology

    Aarts, M.P.J.; Aries, M.B.C.; Straathof, J.; van Hoof, J.

    2015-01-01

    Long-term care facilities are currently installing dynamic lighting systems with the aim to improve the well-being and behaviour of residents with dementia. The aim of this study was to investigate the implementation of dynamic lighting systems from the perspective of stakeholders and the

  16. Management and Development of the RT Research Facilities and Infrastructures

    Kim, Won Ho; Nho, Young Chang; Kim, Jae Sung

    2009-01-01

    The purpose of this project are to operate the core facilities of the research for the Radiation Technology in stable and to assist the research activities efficiently in the industry, academic, and research laboratory. By developing the infrastructure of the national radio technology industry, we can activate the researching area of the RT and the related industry, and obtain the primary and original technology. The key point in the study of the RT and the assistance of the industry, academic, and research laboratory for the RT area smoothly, is managing the various of unique radiation facilities in our country. The gamma Phytotron and Gene Bank are essential in the agribiology because these facilities are used to preserve and utilize the genes and to provide an experimental field for the environment and biotechnology. The Radiation Fusion Technology research supporting facilities are the core support facilities, and are used to develop the high-tech fusion areas. In addition, the most advanced analytical instruments, whose costs are very high, should be managed in stable and be utilized in supporting works, and the experimental animal supporting laboratory and Gamma Cell have to be maintained in high level and managed in stable also. The ARTI have been developed the 30MeV cyclotron during 2005∼2006, aimed to produce radioisotopes and to research the beam applications as a result of the project, 'Establishment of the Infrastructure for the Atomic Energy Research Expansion', collaborated with the Korea Institute of Radiological and Medical Sciences. In addition, the ARTI is in the progress of establishing cyclotron integrated complex as a core research facility, using a proton beam to produce radioisotopes and to support a various research areas. The measurement and evaluation of the irradiation dose, and irradiation supporting technology of the Good Irradiation Practice(GIP) are essential in various researching areas. One thing to remember is that the publicity

  17. Firms' Ownership,Financing Source and R&D Output: Empirical Research on China's High-tech Industry%企业性质、资金来源与研发产出——基于我国高技术产业的实证研究

    高艳慧; 万迪昉

    2011-01-01

    This paper studies the relationship among the financing from different sources,the relationship between RD financing and the productivity and the impact of the proportion of the financing from different sources on RD efficiency,using the data on China's high-tech industry.We also analyze the differences between state-owned enterprise and foreign-funded enterprise.The important results are as follows.Government financing has significant positive effect on firms' lagged own RD expenditure.However,government financing has no affirmatory effect on the RD output.The financing from different sources has different preference on the sales of new products and the number of patents.Government financing prefers the number of patents and finance loan prefers the sales of new products.Firms' own RD expenditure has no obvious preference in state-owned enterprises and prefers the sales of new products in foreign-funded enterprise.The proportion of government financing should not be too low or too high.At present,it is too low in foreign-funded enterprise and too high in state-owned enterprise.The proportion of finance loan has inverse U-shape relationship with RD efficiency.%利用我国高技术产业1998—2008年的数据,研究研发中各来源资金之间的关系、各来源资金对于研发产出以及各来源资金比重对于研发效率的影响,并分析国有企业和三资企业的不同。结果表明:政府资金对于滞后一期的自有资金投入有显著的促进作用,但政府资金本身对于研发产出的效果则不明确;对于新产品销售收入和专利申请数,各来源资金表现出明显的偏好:政府资金倾向于专利申请,金融贷款倾向于促进新产品销售收入,自有资金在国有企业中没有明显的偏好,三资企业中则倾向于新产品销售收入;政府资金比重太低或太高都会对研发效率有负向影响,目前三资企业的政府资金比重太低,国有企业的政府资金比重太

  18. EPA Facility Registry Service (FRS): CERCLIS

    U.S. Environmental Protection Agency — This data provides location and attribute information on Facilities regulated under the Comprehensive Environmental Responsibility Compensation and Liability...

  19. 20 CFR 404.1623 - Facilities.

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Facilities. 404.1623 Section 404.1623...- ) Determinations of Disability Administrative Responsibilities and Requirements § 404.1623 Facilities. (a) Space... determinations. (b) Location of facilities. Subject to appropriate Federal funding, the State will determine the...

  20. Emission Facilities - Erosion & Sediment Control Facilities

    NSGIC Education | GIS Inventory — An Erosion and Sediment Control Facility is a DEP primary facility type related to the Water Pollution Control program. The following sub-facility types related to...

  1. Review of the Tritium Extraction Facility design

    Barton, R.W.; Bamdad, F.; Blackman, J.

    2000-01-01

    The Defense Nuclear Facilities Safety Board (DNFSB) is an independent executive branch agency responsible for technical safety oversight of the US Department of Energy's (DOE's) defense nuclear facilities. One of DNFSB's responsibilities is the review of design and construction projects for DOE's defense nuclear facilities to ensure that adequate health and safety requirements are identified and implemented. These reviews are performed with the expectation that facility designs are being developed within the framework of a site's Integrated Safety Management (ISM) program. This paper describes the application of ISM principles in DNFSB's ongoing review of the Tritium Extraction Facility (TEF) design/construction project

  2. Review of the Tritium Extraction Facility Design

    Ronald W. Barton; Farid Bamdad; Joel Blackman

    2000-01-01

    The Defense Nuclear Facilities Safety Board (DNFSB) is an independent executive branch agency responsible for technical safety oversight of the U.S. Department of Energy's (DOE's) defense nuclear facilities. One of DNFSB's responsibilities is the review of design and construction projects for DOE's defense nuclear facilities to ensure that adequate health and safety requirements are identified and implemented. These reviews are performed with the expectation that facility designs are being developed within the framework of a site's Integrated Safety Management (ISM) program. This paper describes the application of ISM principles in DNFSB's ongoing review of the Tritium Extraction Facility (TEF) design/construction project

  3. Air Quality Facilities

    Iowa State University GIS Support and Research FacilityFacilities with operating permits for Title V of the Federal Clean Air Act, as well as facilities required to submit an air emissions inventory, and other facilities...

  4. COGEMA's UMF [Uranium Management Facility

    Lamorlette, G.; Bertrand, J.P.

    1988-01-01

    The French government-owned corporation, COGEMA, is responsible for the nuclear fuel cycle. This paper describes the activities at COGEMA's Pierrelatte facility, especially its Uranium Management Facility. UF6 handling and storage is described for natural, enriched, depleted, and reprocessed uranium. UF6 quality control specifications, sampling, and analysis (halocarbon and volatile fluorides, isotopic analysis, uranium assay, and impurities) are described. In addition, the paper discusses the filling and cleaning of containers and security at UMF

  5. 340 Facility maintenance implementation plan

    1995-03-01

    This Maintenance Implementation Plan (MIP) has been developed for maintenance functions associated with the 340 Facility. This plan is developed from the guidelines presented by Department of Energy (DOE) Order 4330.4B, Maintenance Management Program (DOE 1994), Chapter II. The objective of this plan is to provide baseline information for establishing and identifying Westinghouse Hanford Company (WHC) conformance programs and policies applicable to implementation of DOE order 4330.4B guidelines. In addition, this maintenance plan identifies the actions necessary to develop a cost-effective and efficient maintenance program at the 340 Facility. Primary responsibility for the performance and oversight of maintenance activities at the 340 Facility resides with Westinghouse Hanford Company (WHC). Maintenance at the 340 Facility is performed by ICF-Kaiser Hanford (ICF-KH) South Programmatic Services crafts persons. This 340 Facility MIP provides interface requirements and responsibilities as they apply specifically to the 340 Facility. This document provides an implementation schedule which has been developed for items considered to be deficient or in need of improvement. The discussion sections, as applied to implementation at the 340 Facility, have been developed from a review of programs and practices utilizing the graded approach. Biennial review and additional reviews are conducted as significant programmatic and mission changes are made. This document is revised as necessary to maintain compliance with DOE requirements

  6. 340 Facility maintenance implementation plan

    NONE

    1995-03-01

    This Maintenance Implementation Plan (MIP) has been developed for maintenance functions associated with the 340 Facility. This plan is developed from the guidelines presented by Department of Energy (DOE) Order 4330.4B, Maintenance Management Program (DOE 1994), Chapter II. The objective of this plan is to provide baseline information for establishing and identifying Westinghouse Hanford Company (WHC) conformance programs and policies applicable to implementation of DOE order 4330.4B guidelines. In addition, this maintenance plan identifies the actions necessary to develop a cost-effective and efficient maintenance program at the 340 Facility. Primary responsibility for the performance and oversight of maintenance activities at the 340 Facility resides with Westinghouse Hanford Company (WHC). Maintenance at the 340 Facility is performed by ICF-Kaiser Hanford (ICF-KH) South Programmatic Services crafts persons. This 340 Facility MIP provides interface requirements and responsibilities as they apply specifically to the 340 Facility. This document provides an implementation schedule which has been developed for items considered to be deficient or in need of improvement. The discussion sections, as applied to implementation at the 340 Facility, have been developed from a review of programs and practices utilizing the graded approach. Biennial review and additional reviews are conducted as significant programmatic and mission changes are made. This document is revised as necessary to maintain compliance with DOE requirements.

  7. Site maps and facilities listings

    1993-11-01

    In September 1989, a Memorandum of Agreement among DOE offices regarding the environmental management of DOE facilities was signed by appropriate Assistant Secretaries and Directors. This Memorandum of Agreement established the criteria for EM line responsibility. It stated that EM would be responsible for all DOE facilities, operations, or sites (1) that have been assigned to DOE for environmental restoration and serve or will serve no future production need; (2) that are used for the storage, treatment, or disposal of hazardous, radioactive, and mixed hazardous waste materials that have been properly characterized, packaged, and labelled, but are not used for production; (3) that have been formally transferred to EM by another DOE office for the purpose of environmental restoration and the eventual return to service as a DOE production facility; or (4) that are used exclusively for long-term storage of DOE waste material and are not actively used for production, with the exception of facilities, operations, or sites under the direction of the DOE Office of Civilian Radioactive Waste Management. As part of the implementation of the Memorandum of Agreement, Field Offices within DOE submitted their listings of facilities, systems, operation, and sites for which EM would have line responsibility. It is intended that EM facility listings will be revised on a yearly basis so that managers at all levels will have a valid reference for the planning, programming, budgeting and execution of EM activities

  8. Site maps and facilities listings

    1993-11-01

    In September 1989, a Memorandum of Agreement among DOE offices regarding the environmental management of DOE facilities was signed by appropriate Assistant Secretaries and Directors. This Memorandum of Agreement established the criteria for EM line responsibility. It stated that EM would be responsible for all DOE facilities, operations, or sites (1) that have been assigned to DOE for environmental restoration and serve or will serve no future production need; (2) that are used for the storage, treatment, or disposal of hazardous, radioactive, and mixed hazardous waste materials that have been properly characterized, packaged, and labelled, but are not used for production; (3) that have been formally transferred to EM by another DOE office for the purpose of environmental restoration and the eventual return to service as a DOE production facility; or (4) that are used exclusively for long-term storage of DOE waste material and are not actively used for production, with the exception of facilities, operations, or sites under the direction of the DOE Office of Civilian Radioactive Waste Management. As part of the implementation of the Memorandum of Agreement, Field Offices within DOE submitted their listings of facilities, systems, operation, and sites for which EM would have line responsibility. It is intended that EM facility listings will be revised on a yearly basis so that managers at all levels will have a valid reference for the planning, programming, budgeting and execution of EM activities.

  9. Reactor facility

    Suzuki, Hiroaki; Murase, Michio; Yokomizo, Osamu.

    1997-01-01

    The present invention provides a BWR type reactor facility capable of suppressing the amount of steams generated by the mutual effect of a failed reactor core and coolants upon occurrence of an imaginal accident, and not requiring spacial countermeasures for enhancing the pressure resistance of the container vessel. Namely, a means for supplying cooling water at a temperature not lower by 30degC than the saturated temperature corresponding to the inner pressure of the containing vessel upon occurrence of an accident is disposed to a lower dry well below the pressure vessel. As a result, upon occurrence of such an accident that the reactor core should be melted and flown downward of the pressure vessel, when cooling water at a temperature not lower than the saturated temperature, for example, cooling water at 100degC or higher is supplied to the lower dry well, abrupt generation of steams by the mutual effect of the failed reactor core and cooling water is scarcely caused compared with a case of supplying cooling water at a temperature lower than the saturation temperature by 30degC or more. Accordingly, the amount of steams to be generated can be suppressed, and special countermeasure is no more necessary for enhancing the pressure resistance of the container vessel is no more necessary. (I.S.)

  10. Nuclear facilities

    Anon.

    2002-01-01

    During September and October 2001, 15 events were recorded on the first grade and 1 on the second grade of the INES scale. The second grade event is in fact a re-classification of an incident that occurred on the second april 2001 at Dampierre power plant. This event happened during core refueling, a shift in the operation sequence led to the wrong positioning of 113 assemblies. A preliminary study of this event shows that this wrong positioning could have led, in other circumstances, to the ignition of nuclear reactions. Even in that case, the analysis made by EDF shows that the consequences on the staff would have been limited. Nevertheless a further study has shown that the existing measuring instruments could not have detected the power increase announcing the beginning of the chain reaction. The investigation has shown that there were deficiencies in the control of the successive operations involved in refueling. EDF has proposed a series of corrective measures to be implemented in all nuclear power plants. The other 15 events are described in the article. During this period 121 inspections have been made in nuclear facilities. (A.C.)

  11. Thermal Response of Whipox-Type All-Oxide Ceramic Matrix Composites during Reentry Simulation in the Dlr-Lbk Arc-Heated Facility

    Mechnich, P.; Braue, W.; Schneider, H.; Koch, U.; Esser, B.; Gülhan, A.

    2005-02-01

    All-oxide ceramic matrix composites (CMCs) such as WHIPOXTM (wound highly porous oxide) exhibit excellent damage tolerance and thermal stability up to 1400°C. Due to their low density and thermal conductivity these new ceramic materials are considered promising candidates for thermal protection systems (TPS) of spacecrafts. The performance of WHIPOX-type CMCs was evaluated during reentry simulations in the L2K leg of the arc-heated LBK facility of DLR, Cologne. The application of reaction-bonded alumina (RBAO) coatings provides significant CMC surface protection and decreased gas permeability, which are key issues for reentry applications. Since emittance and catalycity of the RBAO-coatings limit the performance of CMCs in a reentry environment, binary SiC/RBAO coatings providing higher emittance and/or lower catalycity proved to be a promising approach.

  12. U. S. Department of energy actions to ensure nuclear safety at its nuclear facilities in response to lessons being learned from the Fukushima dacha accident

    Chung, Dae; O' Brien, James [U. S. Department of Energy, Washington (United States)

    2012-03-15

    The U. S. Department of Energy (DOE) has established a rigorous nuclear safety regulatory infrastructure for the protection of workers, the public, and the environment. An essential part of this infrastructure is a safety culture that promotes organizational learning and includes a commitment to safety by senior leaders that is demonstrated through their actions and behaviors. The tragic Fukushima Dacha accident presented an important challenge for DOE leaders to demonstrate a robust safety culture by critically examining the Department' s regulatory infrastructure and its implementation to ensure that appropriate safety provisions were in place. This paper discusses the actions DOE has taken to date in this regard and further planned action to ensure safety at DOE facilities in light of lessons being learned from the Fukushima Dacha accident.

  13. U. S. Department of energy actions to ensure nuclear safety at its nuclear facilities in response to lessons being learned from the Fukushima dacha accident

    Chung, Dae; O'Brien, James

    2012-01-01

    The U. S. Department of Energy (DOE) has established a rigorous nuclear safety regulatory infrastructure for the protection of workers, the public, and the environment. An essential part of this infrastructure is a safety culture that promotes organizational learning and includes a commitment to safety by senior leaders that is demonstrated through their actions and behaviors. The tragic Fukushima Dacha accident presented an important challenge for DOE leaders to demonstrate a robust safety culture by critically examining the Department' s regulatory infrastructure and its implementation to ensure that appropriate safety provisions were in place. This paper discusses the actions DOE has taken to date in this regard and further planned action to ensure safety at DOE facilities in light of lessons being learned from the Fukushima Dacha accident

  14. Developing standardized facility contingency plans

    Davidson, D.A.

    1993-01-01

    Texaco consists of several operating departments that are, in effect, independent companies. Each of these departments is responsible for complying with all environmental laws and regulations. This includes the preparation by each facility to respond to an oil spill at that location. For larger spills, however, management of the response will rest with corporate regional response teams. Personnel from all departments make up the regional teams. In 1990, Congress passed the Oil Pollution Act. In 1991, the US Coast Guard began developing oil spill response contingency plan regulations, which they are still working on. Meanwhile, four of the five west coast states have also passed laws requiring contingency plans. (Only Hawaii has chosen to wait and see what the federal regulations will entail). Three of the states have already adopted regulations. Given these laws and regulations, along with its corporate structure, Texaco addressed the need to standardize local facility plans as well as its response organization. This paper discusses how, by working together, the Texaco corporate international oil spill response staff and the Texaco western region on-scene commander developed: A standard contingency plan format crossing corporate boundaries and meeting federal and state requirements. A response organization applicable to any size facility or spill. A strategy to sell the standard contingency plan and response organization to the operating units

  15. Stimuli-responsive poly(N-vinylcaprolactam-co-2-methoxyethyl acrylate) core–shell microgels: facile synthesis, modulation of surface properties and controlled internalisation into cells†

    Melle, A.; Balaceanu, A.; Kather, M.; Wu, Yaodong; Gau, E.; Sun, W.; Huang, Xiaobin; Shi, X; Karperien, Hermanus Bernardus Johannes; Pich, A.

    2016-01-01

    Herein we report the synthesis of biocompatible stimuli-responsive core–shell microgels consisting of a poly(N-vinylcaprolactam) (PVCL) core and a poly(2-methoxyethyl acrylate) (PMEA) corona via one-step surfactant-free precipitation copolymerization. The copolymerization process was investigated by

  16. ORNL Isotopes Facilities Shutdown Program Plan

    Gibson, S.M.; Patton, B.D.; Sears, M.B.

    1990-10-01

    This plan presents the results of a technical and economic assessment for shutdown of the Oak Ridge National Laboratory (ORNL) isotopes production and distribution facilities. On December 11, 1989, the Department of Energy (DOE), Headquarters, in a memorandum addressed to DOE Oak Ridge Operations Office (DOE-ORO), gave instructions to prepare the ORNL isotopes production and distribution facilities, with the exception of immediate facility needs for krypton-85, tritium, and yttrium-90, for safe shutdown. In response to the memorandum, ORNL identified 17 facilities for shutdown. Each of these facilities is located within the ORNL complex with the exception of Building 9204-3, which is located at the Y-12 Weapons Production Plant. These facilities have been used extensively for the production of radioactive materials by the DOE Isotopes Program. They currently house a large inventory of radioactive materials. Over the years, these aging facilities have inherited the problems associated with storing and processing highly radioactive materials (i.e., facilities' materials degradation and contamination). During FY 1990, ORNL is addressing the requirements for placing these facilities into safe shutdown while maintaining the facilities under the existing maintenance and surveillance plan. The day-to-day operations associated with the surveillance and maintenance of a facility include building checks to ensure that building parameters are meeting the required operational safety requirements, performance of contamination control measures, and preventative maintenance on the facility and facility equipment. Shutdown implementation will begin in FY 1993, and shutdown completion will occur by the end of FY 1994

  17. Irradiation Facilities at CERN

    Gkotse, Blerina; Carbonez, Pierre; Danzeca, Salvatore; Fabich, Adrian; Garcia, Alia, Ruben; Glaser, Maurice; Gorine, Georgi; Jaekel, Martin, Richard; Mateu,Suau, Isidre; Pezzullo, Giuseppe; Pozzi, Fabio; Ravotti, Federico; Silari, Marco; Tali, Maris

    2017-01-01

    CERN provides unique irradiation facilities for applications in many scientific fields. This paper summarizes the facilities currently operating for proton, gamma, mixed-field and electron irradiations, including their main usage, characteristics and information about their operation. The new CERN irradiation facilities database is also presented. This includes not only CERN facilities but also irradiation facilities available worldwide.

  18. Research Facilities | Wind | NREL

    Research Facilities Research Facilities NREL's state-of-the-art wind research facilities at the Research Facilities Photo of five men in hard hards observing the end of a turbine blade while it's being tested. Structural Research Facilities A photo of two people silhouetted against a computer simulation of

  19. Enhanced change detection index for disaster response, recovery assessment and monitoring of buildings and critical facilities-A case study for Muzzaffarabad, Pakistan

    de Alwis Pitts, Dilkushi A.; So, Emily

    2017-12-01

    The availability of Very High Resolution (VHR) optical sensors and a growing image archive that is frequently updated, allows the use of change detection in post-disaster recovery and monitoring for robust and rapid results. The proposed semi-automated GIS object-based method uses readily available pre-disaster GIS data and adds existing knowledge into the processing to enhance change detection. It also allows targeting specific types of changes pertaining to similar man-made objects such as buildings and critical facilities. The change detection method is based on pre/post normalized index, gradient of intensity, texture and edge similarity filters within the object and a set of training data. More emphasis is put on the building edges to capture the structural damage in quantifying change after disaster. Once the change is quantified, based on training data, the method can be used automatically to detect change in order to observe recovery over time in potentially large areas. Analysis over time can also contribute to obtaining a full picture of the recovery and development after disaster, thereby giving managers a better understanding of productive management and recovery practices. The recovery and monitoring can be analyzed using the index in zones extending from to epicentre of disaster or administrative boundaries over time.

  20. North Slope, Alaska ESI: FACILITY (Facility Points)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains data for oil field facilities for the North Slope of Alaska. Vector points in this data set represent oil field facility locations. This data...

  1. Neutron-induced nuclear data for the MYRRHA fast spectrum facility

    Romojaro Pablo

    2017-01-01

    Full Text Available The MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications concept is a flexible experimental lead-bismuth cooled and mixed-oxide (MOX fueled fast spectrum facility designed to operate both in sub-critical (accelerator driven and critical modes. One of the key issues for the safe operation of the reactor is the uncertainty assessment during the design works. The main objective of the European project CHANDA (solving CHAllenges in Nuclear DAta Work Package 10 is to improve MYRRHA relevant nuclear data in order to reduce the reactor parameter uncertainties derived from them. In order to achieve this goal, several tasks have been undertaken. First, a sensitivity study of MYRRHA integral parameters, such as energy dependent cross sections, fission spectra and neutron multiplicities, to nuclear data has been conducted resulting in a list of MYRRHA relevant quantities (nuclides and reactions. On the second task, an analysis of the existing experimental data and evaluations for the quantities included in the list has been carried out. In this framework, the impact on the multiplication factor of quantities from different nuclear data libraries for different nuclides, reactions and energy regions has been investigated on the MYRRHA MOX critical core model. As the next step, new experiments and evaluations will be performed in order to improve existing nuclear data libraries.

  2. Facile promoter deletion in Escherichia coli in response to leaky expression of very robust and benign proteins from common expression vectors

    Kawe Martin

    2009-01-01

    Full Text Available Abstract Background Overexpression of proteins in Escherichia coli is considered routine today, at least when the protein is soluble and not otherwise toxic for the host. We report here that the massive overproduction of even such "benign" proteins can cause surprisingly efficient promoter deletions in the expression plasmid, leading to the growth of only non-producers, when expression is not well repressed in the newly transformed bacterial cell. Because deletion is so facile, it might impact on high-throughput protein production, e.g. for structural genomics, where not every expression parameter will be monitored. Results We studied the high-level expression of several robust non-toxic proteins using a T5 promoter under lac operator control. Full induction leads to no significant growth retardation. We compared expression from almost identical plasmids with or without the lacI gene together in strains expressing different levels of LacI. Any combination without net overexpression of LacI led to an efficient promoter deletion in the plasmid, although the number of growing colonies and even the plasmid size – all antibiotic-resistant non-producers – was almost normal, and thus the problem not immediately recognizable. However, by assuring sufficient repression during the initial establishment phase of the plasmid, deletion was completely prevented. Conclusion The deletions in the insufficiently repressed system are caused entirely by the burden of high-level translation. Since the E. coli Dps protein, known to protect DNA against stress in the stationary phase, is accumulated in the deletion mutants, the mutation may have taken place during a transient stationary phase. The cause of the deletion is thus distinct from the well known interference of high-level transcription with plasmid replication. The deletion can be entirely prevented by overexpressing LacI, a useful precaution even without any signs of stress caused by the protein.

  3. Jupiter Laser Facility

    Federal Laboratory Consortium — The Jupiter Laser Facility is an institutional user facility in the Physical and Life Sciences Directorate at LLNL. The facility is designed to provide a high degree...

  4. Basic Research Firing Facility

    Federal Laboratory Consortium — The Basic Research Firing Facility is an indoor ballistic test facility that has recently transitioned from a customer-based facility to a dedicated basic research...

  5. National Ignition Facility site requirements

    1996-07-01

    The Site Requirements (SR) provide bases for identification of candidate host sites for the National Ignition Facility (NIF) and for the generation of data regarding potential actual locations for the facilities. The SR supplements the NIF Functional Requirements (FR) with information needed for preparation of responses to queries for input to HQ DOE site evaluation. The queries are to include both documents and explicit requirements for the potential host site responses. The Sr includes information extracted from the NIF FR (for convenience), data based on design approaches, and needs for physical and organization infrastructure for a fully operational NIF. The FR and SR describe requirements that may require new construction or may be met by use or modification of existing facilities. The SR do not establish requirements for NIF design or construction project planning. The SR document does not constitute an element of the NIF technical baseline

  6. Aperture area measurement facility

    Federal Laboratory Consortium — NIST has established an absolute aperture area measurement facility for circular and near-circular apertures use in radiometric instruments. The facility consists of...

  7. High Throughput Facility

    Federal Laboratory Consortium — Argonne?s high throughput facility provides highly automated and parallel approaches to material and materials chemistry development. The facility allows scientists...

  8. Licensed Healthcare Facilities

    California Natural Resource Agency — The Licensed Healthcare Facilities point layer represents the locations of all healthcare facilities licensed by the State of California, Department of Health...

  9. Facility Registry Service (FRS)

    U.S. Environmental Protection Agency — The Facility Registry Service (FRS) provides an integrated source of comprehensive (air, water, and waste) environmental information about facilities across EPA,...

  10. DRY TRANSFER FACILITY SEISMIC ANALYSIS

    EARNEST, S.; KO, H.; DOCKERY, W.; PERNISI, R.

    2004-01-01

    The purpose of this calculation is to perform a dynamic and static analysis on the Dry Transfer Facility, and to determine the response spectra seismic forces for the design basis ground motions. The resulting seismic forces and accelerations will be used in a subsequent calculation to complete preliminary design of the concrete shear walls, diaphragms, and basemat

  11. WIPP facility representative program plan

    1994-01-01

    This plan describes the Department of Energy (DOE), Carlsbad Area Office (CAO) facility representative (FR) program at the Waste Isolation Pilot Plant (WIPP). It provides the following information: (1) FR and support organization authorities and responsibilities; (2) FR program requirements; and (3) FR training and qualification requirements

  12. Guide to research facilities

    1993-06-01

    This Guide provides information on facilities at US Department of Energy (DOE) and other government laboratories that focus on research and development of energy efficiency and renewable energy technologies. These laboratories have opened these facilities to outside users within the scientific community to encourage cooperation between the laboratories and the private sector. The Guide features two types of facilities: designated user facilities and other research facilities. Designated user facilities are one-of-a-kind DOE facilities that are staffed by personnel with unparalleled expertise and that contain sophisticated equipment. Other research facilities are facilities at DOE and other government laboratories that provide sophisticated equipment, testing areas, or processes that may not be available at private facilities. Each facility listing includes the name and phone number of someone you can call for more information.

  13. Prospects for trade high-tech goods in the world and Ukraine Перспективы развития торговли высокотехнологичными товарами в мире и Украине

    Matyushenko Igor Y.

    2012-08-01

    Full Text Available The problems of determining trends in international trade in high-tech goods of the developed countries and Ukraine were showed. The results of the analysis and forecast of development of foreign trade five high-tech Industries of the USA, China, Japan, EU-27 and Ukraine for 2004 – 2010 were presented.Рассмотрены проблемы определения тенденций развития международной торговли высокотехнологичными товарами. Приведены результаты анализа и представлен прогноз развития внешней торговли товарами пяти высокотехнологичных отраслей промышленности США, Китая, Японии, ЕС-27 и Украины за 2004 – 2010 гг.

  14. NRC regulation of DOE facilities

    Buhl, A.R.; Edgar, G.; Silverman, D.; Murley, T.

    1997-01-01

    The US Department of Energy (DOE), its contractors, and the Nuclear Regulatory Commission (NRC) are in for major changes if the DOE follows through on its intentions announced December 20, 1996. The DOE is seeking legislation to establish the NRC as the regulatory agency with jurisdiction over nuclear health, safety, and security at a wide range of DOE facilities. At this stage, it appears that as many as 200 (though not all) DOE facilities would be affected. On March 28, 1997, the NRC officially endorsed taking over the responsibility for regulatory oversight of DOE nuclear facilities as the DOE had proposed, contingent upon adequate funding, staffing resources, and a clear delineation of NRC authority. This article first contrasts the ways in which the NRC and the DOE carry out their basic regulatory functions. Next, it describes the NRC's current authority over DOE facilities and the status of the DOE's initiative to expand that authority. Then, it discusses the basic changes and impacts that can be expected in the regulation of DOE facilities. The article next describes key lessons learned from the recent transition of the GDPs from DOE oversight to NRC regulation and the major regulatory issues that arose in that transition. Finally, some general strategies are suggested for resolving issues likely to arise as the NRC assumes regulatory authority over DOE facilities

  15. Physical security of cut-and-cover underground facilities

    Morse, W.D.

    1998-01-01

    To aid designers, generic physical security objectives and design concepts for cut-and-cover underground facilities are presented. Specific aspects addressing overburdens, entryways, security doors, facility services, emergency egress, security response force, and human elements are discussed

  16. 40 CFR 279.52 - General facility standards.

    2010-07-01

    ... familiar with all aspects of the facility's contingency plan, all operations and activities at the facility... response roles if their help is needed. (ii) Whenever there is a release, fire, or explosion, the emergency...

  17. Lewis Research Center space station electric power system test facilities

    Birchenough, Arthur G.; Martin, Donald F.

    1988-01-01

    NASA Lewis Research Center facilities were developed to support testing of the Space Station Electric Power System. The capabilities and plans for these facilities are described. The three facilities which are required in the Phase C/D testing, the Power Systems Facility, the Space Power Facility, and the EPS Simulation Lab, are described in detail. The responsibilities of NASA Lewis and outside groups in conducting tests are also discussed.

  18. LLL transient-electromagnetics-measurement facility

    Deadrick, F.J.; Miller, E.K.; Hudson, H.G.

    1975-01-01

    The operation and hardware of the Lawrence Livermore Laboratory's transient-electromagnetics (EM)-measurement facility are described. The transient-EM range is useful for determining the time-domain transient responses of structures to incident EM pulses. To illustrate the accuracy and utility of the EM-measurement facility, actual experimental measurements are compared to numerically computed values

  19. Springfield Processing Plant (SPP) Facility Information

    Leach, Janice; Torres, Teresa M.

    2012-10-01

    The Springfield Processing Plant is a hypothetical facility. It has been constructed for use in training workshops. Information is provided about the facility and its surroundings, particularly security-related aspects such as target identification, threat data, entry control, and response force data.

  20. Communication grounding facility

    Lee, Gye Seong

    1998-06-01

    It is about communication grounding facility, which is made up twelve chapters. It includes general grounding with purpose, materials thermal insulating material, construction of grounding, super strength grounding method, grounding facility with grounding way and building of insulating, switched grounding with No. 1A and LCR, grounding facility of transmission line, wireless facility grounding, grounding facility in wireless base station, grounding of power facility, grounding low-tenton interior power wire, communication facility of railroad, install of arrester in apartment and house, install of arrester on introduction and earth conductivity and measurement with introduction and grounding resistance.

  1. Facility Interface Capability Assessment (FICA) project report

    Pope, R.B.; MacDonald, R.R.; Viebrock, J.M.; Mote, N.

    1995-09-01

    The US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is responsible for developing the Civilian Radioactive Waste Management System (CRWMS) to accept spent nuclear fuel from commercial facilities. The objective of the Facility Interface Capability Assessment (FICA) project was to assess the capability of each commercial spent nuclear fuel (SNF) storage facility, at which SNF is stored, to handle various SNF shipping casks. The purpose of this report is to present and analyze the results of the facility assessments completed within the FICA project. During Phase 1, the data items required to complete the facility assessments were identified and the database for the project was created. During Phase 2, visits were made to 122 facilities on 76 sites to collect data and information, the database was updated, and assessments of the cask-handling capabilities at each facility were performed. Each assessment of cask-handling capability contains three parts: the current capability of the facility (planning base); the potential enhanced capability if revisions were made to the facility licensing and/or administrative controls; and the potential enhanced capability if limited physical modifications were made to the facility. The main conclusion derived from the planning base assessments is that the current facility capabilities will not allow handling of any of the FICA Casks at 49 of the 122 facilities evaluated. However, consideration of potential revisions and/or modifications showed that all but one of the 49 facilities could be adapted to handle at least one of the FICA Casks. For this to be possible, facility licensing, administrative controls, and/or physical aspects of the facility would need to be modified

  2. Facility Interface Capability Assessment (FICA) project report

    Pope, R.B. [ed.] [Oak Ridge National Lab., TN (United States); MacDonald, R.R. [ed.] [Civilian Radioactive Waste Management System, Vienna, VA (United States); Viebrock, J.M.; Mote, N. [Nuclear Assurance Corp., Norcross, GA (United States)

    1995-09-01

    The US Department of Energy`s (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is responsible for developing the Civilian Radioactive Waste Management System (CRWMS) to accept spent nuclear fuel from commercial facilities. The objective of the Facility Interface Capability Assessment (FICA) project was to assess the capability of each commercial spent nuclear fuel (SNF) storage facility, at which SNF is stored, to handle various SNF shipping casks. The purpose of this report is to present and analyze the results of the facility assessments completed within the FICA project. During Phase 1, the data items required to complete the facility assessments were identified and the database for the project was created. During Phase 2, visits were made to 122 facilities on 76 sites to collect data and information, the database was updated, and assessments of the cask-handling capabilities at each facility were performed. Each assessment of cask-handling capability contains three parts: the current capability of the facility (planning base); the potential enhanced capability if revisions were made to the facility licensing and/or administrative controls; and the potential enhanced capability if limited physical modifications were made to the facility. The main conclusion derived from the planning base assessments is that the current facility capabilities will not allow handling of any of the FICA Casks at 49 of the 122 facilities evaluated. However, consideration of potential revisions and/or modifications showed that all but one of the 49 facilities could be adapted to handle at least one of the FICA Casks. For this to be possible, facility licensing, administrative controls, and/or physical aspects of the facility would need to be modified.

  3. AOV Facility Tool/Facility Safety Specifications -

    Department of Transportation — Develop and maintain authorizing documents that are standards that facilities must follow. These standards are references of FAA regulations and are specific to the...

  4. PUREX facility hazards assessment

    Sutton, L.N.

    1994-01-01

    This report documents the hazards assessment for the Plutonium Uranium Extraction Plant (PUREX) located on the US Department of Energy (DOE) Hanford Site. Operation of PUREX is the responsibility of Westinghouse Hanford Company (WHC). This hazards assessment was conducted to provide the emergency planning technical basis for PUREX. DOE Order 5500.3A requires an emergency planning hazards assessment for each facility that has the potential to reach or exceed the lowest level emergency classification. In October of 1990, WHC was directed to place PUREX in standby. In December of 1992 the DOE Assistant Secretary for Environmental Restoration and Waste Management authorized the termination of PUREX and directed DOE-RL to proceed with shutdown planning and terminal clean out activities. Prior to this action, its mission was to reprocess irradiated fuels for the recovery of uranium and plutonium. The present mission is to establish a passively safe and environmentally secure configuration at the PUREX facility and to preserve that condition for 10 years. The ten year time frame represents the typical duration expended to define, authorize and initiate follow-on decommissioning and decontamination activities

  5. Operating procedures: Fusion Experiments Analysis Facility

    Lerche, R.A.; Carey, R.W.

    1984-03-20

    The Fusion Experiments Analysis Facility (FEAF) is a computer facility based on a DEC VAX 11/780 computer. It became operational in late 1982. At that time two manuals were written to aid users and staff in their interactions with the facility. This manual is designed as a reference to assist the FEAF staff in carrying out their responsibilities. It is meant to supplement equipment and software manuals supplied by the vendors. Also this manual provides the FEAF staff with a set of consistent, written guidelines for the daily operation of the facility.

  6. Operating procedures: Fusion Experiments Analysis Facility

    Lerche, R.A.; Carey, R.W.

    1984-01-01

    The Fusion Experiments Analysis Facility (FEAF) is a computer facility based on a DEC VAX 11/780 computer. It became operational in late 1982. At that time two manuals were written to aid users and staff in their interactions with the facility. This manual is designed as a reference to assist the FEAF staff in carrying out their responsibilities. It is meant to supplement equipment and software manuals supplied by the vendors. Also this manual provides the FEAF staff with a set of consistent, written guidelines for the daily operation of the facility

  7. Environmental restoration plan for the transfer of surplus facilities to the Facility Transition Program at Oak Ridge National Laboratory

    1995-08-01

    This report will provide guidance on management, coordination, and integration of plans to transition facilities to the Facility Transition Program and activities as related to the Oak Ridge National Laboratory (ORNL) Environmental Restoration Program facilities. This report gives (1) guidance on the steps necessary for identifying ORNL surplus facilities, (2) interfaces of Surveillance and Maintenance (S and M) and Isotope Facility Deactivation program managers, (3) roles and responsibilities of the facility managers, and (4) initial S and M requirements upon acceptance into the Facility Transition Program

  8. Dose apportionment for BARC facilities

    Preetha, J.; Sundar, D.; Munshi, S.K.; Pradeepkumar, K.S.

    2017-01-01

    One of the important responsibilities of BARC Safety Council (BSC) is to ensure that appropriate measures are in place to protect the members of the public and the environment from the undue effects of radioactive releases from the facilities regulated by BSC. It is with this aim in mind that a Standing Committee for Dose Apportionment (DAC) was constituted by BSC in 2005, to ensure that the limits are set by the regulatory body for release of low-level gaseous and liquid effluents into the environment from BARC facilities. There are three Committees for dose apportionment constituted by the Chairman, BSC, viz, DAC-TK for Tarapur and Kalpakkam facilities, DAC-TV for Trombay and DACSF for specific faculties

  9. E-SCAPE: A scale facility for liquid-metal, pool-type reactor thermal hydraulic investigations

    Van Tichelen, Katrien, E-mail: kvtichel@sckcen.be [SCK-CEN, Boeretang 200, 2400 Mol (Belgium); Mirelli, Fabio, E-mail: fmirelli@sckcen.be [SCK-CEN, Boeretang 200, 2400 Mol (Belgium); Greco, Matteo, E-mail: mgreco@sckcen.be [SCK-CEN, Boeretang 200, 2400 Mol (Belgium); Viviani, Giorgia, E-mail: giorgiaviviani@gmail.com [University of Pisa, Lungarno Pacinotti 43, 56126 Pisa (Italy)

    2015-08-15

    Highlights: • The E-SCAPE facility is a thermal hydraulic scale model of the MYRRHA fast reactor. • The focus is on mixing and stratification in liquid-metal pool-type reactors. • Forced convection, natural convection and the transition are investigated. • Extensive instrumentation allows validation of computational models. • System thermal hydraulic and CFD models have been used for facility design. - Abstract: MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) is a flexible fast-spectrum research reactor under design at SCK·CEN. MYRRHA is a pool-type reactor with lead bismuth eutectic (LBE) as primary coolant. The proper understanding of the thermal hydraulic phenomena occurring in the reactor pool is an important issue in the design and licensing of the MYRRHA system and liquid-metal cooled reactors by extension. Model experiments are necessary for understanding the physics, for validating experimental tools and to qualify the design for the licensing. The E-SCAPE (European SCAled Pool Experiment) facility at SCK·CEN is a thermal hydraulic 1/6-scale model of the MYRRHA reactor, with an electrical core simulator, cooled by LBE. It provides experimental feedback to the designers on the forced and natural circulation flow patterns. Moreover, it enables to validate the computational methods for their use with LBE. The paper will elaborate on the design of the E-SCAPE facility and its main parameters. Also the experimental matrix and the pre-test analysis using computational fluid dynamics (CFD) and system thermal hydraulics codes will be described.

  10. Integrated Facilities and Infrastructure Plan.

    Reisz Westlund, Jennifer Jill

    2017-03-01

    Our facilities and infrastructure are a key element of our capability-based science and engineering foundation. The focus of the Integrated Facilities and Infrastructure Plan is the development and implementation of a comprehensive plan to sustain the capabilities necessary to meet national research, design, and fabrication needs for Sandia National Laboratories’ (Sandia’s) comprehensive national security missions both now and into the future. A number of Sandia’s facilities have reached the end of their useful lives and many others are not suitable for today’s mission needs. Due to the continued aging and surge in utilization of Sandia’s facilities, deferred maintenance has continued to increase. As part of our planning focus, Sandia is committed to halting the growth of deferred maintenance across its sites through demolition, replacement, and dedicated funding to reduce the backlog of maintenance needs. Sandia will become more agile in adapting existing space and changing how space is utilized in response to the changing requirements. This Integrated Facilities & Infrastructure (F&I) Plan supports the Sandia Strategic Plan’s strategic objectives, specifically Strategic Objective 2: Strengthen our Laboratories’ foundation to maximize mission impact, and Strategic Objective 3: Advance an exceptional work environment that enables and inspires our people in service to our nation. The Integrated F&I Plan is developed through a planning process model to understand the F&I needs, analyze solution options, plan the actions and funding, and then execute projects.

  11. Security culture for nuclear facilities

    Gupta, Deeksha; Bajramovic, Edita

    2017-01-01

    Natural radioactive elements are part of our environment and radioactivity is a natural phenomenon. There are numerous beneficial applications of radioactive elements (radioisotopes) and radiation, starting from power generation to usages in medical, industrial and agriculture applications. But the risk of radiation exposure is always attached to operational workers, the public and the environment. Hence, this risk has to be assessed and controlled. The main goal of safety and security measures is to protect human life, health, and the environment. Currently, nuclear security considerations became essential along with nuclear safety as nuclear facilities are facing rapidly increase in cybersecurity risks. Therefore, prevention and adequate protection of nuclear facilities from cyberattacks is the major task. Historically, nuclear safety is well defined by IAEA guidelines while nuclear security is just gradually being addressed by some new guidance, especially the IAEA Nuclear Security Series (NSS), IEC 62645 and some national regulations. At the overall level, IAEA NSS 7 describes nuclear security as deterrence and detection of, and response to, theft, sabotage, unauthorized access, illegal transfer or other malicious acts involving nuclear, other radioactive substances and their associated facilities. Nuclear security should be included throughout nuclear facilities. Proper implementation of a nuclear security culture leads to staff vigilance and a high level of security posture. Nuclear security also depends on policy makers, regulators, managers, individual employees and members of public. Therefore, proper education and security awareness are essential in keeping nuclear facilities safe and secure.

  12. Facility design, construction, and operation

    1995-04-01

    France has been disposing of low-level radioactive waste (LLW) at the Centre de Stockage de la Manche (CSM) since 1969 and now at the Centre de Stockage de l'Aube (CSA) since 1992. In France, several agencies and companies are involved in the development and implementation of LLW technology. The Commissariat a l'Energie Atomic (CEA), is responsible for research and development of new technologies. The Agence National pour la Gestion des Dechets Radioactifs is the agency responsible for the construction and operation of disposal facilities and for wastes acceptance for these facilities. Compagnie Generale des Matieres Nucleaires provides fuel services, including uranium enrichment, fuel fabrication, and fuel reprocessing, and is thus one generator of LLW. Societe pour les Techniques Nouvelles is an engineering company responsible for commercializing CEA waste management technology and for engineering and design support for the facilities. Numatec, Inc. is a US company representing these French companies and agencies in the US. In Task 1.1 of Numatec's contract with Martin Marietta Energy Systems, Numatec provides details on the design, construction and operation of the LLW disposal facilities at CSM and CSA. Lessons learned from operation of CSM and incorporated into the design, construction and operating procedures at CSA are identified and discussed. The process used by the French for identification, selection, and evaluation of disposal technologies is provided. Specifically, the decisionmaking process resulting in the change in disposal facility design for the CSA versus the CSM is discussed. This report provides' all of the basic information in these areas and reflects actual experience to date

  13. Lesotho - Health Facility Survey

    Millennium Challenge Corporation — The main objective of the 2011 Health Facility Survey (HFS) was to establish a baseline for informing the Health Project performance indicators on health facilities,...

  14. Armament Technology Facility (ATF)

    Federal Laboratory Consortium — The Armament Technology Facility is a 52,000 square foot, secure and environmentally-safe, integrated small arms and cannon caliber design and evaluation facility....

  15. Projectile Demilitarization Facilities

    Federal Laboratory Consortium — The Projectile Wash Out Facility is US Army Ammunition Peculiar Equipment (APE 1300). It is a pilot scale wash out facility that uses high pressure water and steam...

  16. Rocketball Test Facility

    Federal Laboratory Consortium — This test facility offers the capability to emulate and measure guided missile radar cross-section without requiring flight tests of tactical missiles. This facility...

  17. Wastewater Treatment Facilities

    Iowa State University GIS Support and Research Facility — Individual permits for municipal, industrial, and semi-public wastewater treatment facilities in Iowa for the National Pollutant Discharge Elimination System (NPDES)...

  18. Materiel Evaluation Facility

    Federal Laboratory Consortium — CRREL's Materiel Evaluation Facility (MEF) is a large cold-room facility that can be set up at temperatures ranging from −20°F to 120°F with a temperature change...

  19. Environmental Toxicology Research Facility

    Federal Laboratory Consortium — Fully-equipped facilities for environmental toxicology researchThe Environmental Toxicology Research Facility (ETRF) located in Vicksburg, MS provides over 8,200 ft...

  20. Dialysis Facility Compare

    U.S. Department of Health & Human Services — Dialysis Facility Compare helps you find detailed information about Medicare-certified dialysis facilities. You can compare the services and the quality of care that...

  1. Energetics Conditioning Facility

    Federal Laboratory Consortium — The Energetics Conditioning Facility is used for long term and short term aging studies of energetic materials. The facility has 10 conditioning chambers of which 2...

  2. Explosive Components Facility

    Federal Laboratory Consortium — The 98,000 square foot Explosive Components Facility (ECF) is a state-of-the-art facility that provides a full-range of chemical, material, and performance analysis...

  3. Facilities for US Radioastronomy.

    Thaddeus, Patrick

    1982-01-01

    Discusses major developments in radioastronomy since 1945. Topics include proposed facilities, very-long-baseline interferometric array, millimeter-wave telescope, submillimeter-wave telescope, and funding for radioastronomy facilities and projects. (JN)

  4. Neighbourhood facilities for sustainability

    Gibberd, Jeremy T

    2013-01-01

    Full Text Available . In this paper these are referred to as ‘Neighbourhood Facilities for Sustainability’. Neighbourhood Facilities for Sustainability (NFS) are initiatives undertaken by individuals and communities to build local sustainable systems which not only improve...

  5. Cold Vacuum Drying Facility

    Federal Laboratory Consortium — Located near the K-Basins (see K-Basins link) in Hanford's 100 Area is a facility called the Cold Vacuum Drying Facility (CVDF).Between 2000 and 2004, workers at the...

  6. Ouellette Thermal Test Facility

    Federal Laboratory Consortium — The Thermal Test Facility is a joint Army/Navy state-of-the-art facility (8,100 ft2) that was designed to:Evaluate and characterize the effect of flame and thermal...

  7. Integrated Disposal Facility

    Federal Laboratory Consortium — Located near the center of the 586-square-mile Hanford Site is the Integrated Disposal Facility, also known as the IDF.This facility is a landfill similar in concept...

  8. Facility design: introduction

    Unger, W.E.

    1980-01-01

    The design of shielded chemical processing facilities for handling plutonium is discussed. The TRU facility is considered in particular; its features for minimizing the escape of process materials are listed. 20 figures

  9. CLEAR test facility

    Ordan, Julien Marius

    2017-01-01

    A new user facility for accelerator R&D, the CERN Linear Electron Accelerator for Research (CLEAR), started operation in August 2017. CLEAR evolved from the former CLIC Test Facility 3 (CTF3) used by the Compact Linear Collider (CLIC). The new facility is able to host and test a broad range of ideas in the accelerator field.

  10. An analysis of the CERCLA response program and the RCRA corrective action program in determining cleanup strategies for federal facilities which have been proposed for listing on the National Priorities List

    Baker, P.; Vinson, R.

    1994-01-01

    This document was prepared as an issue paper for the Department of Energy to serve in the decision-making process for environmental restoration activities. The paper compares cleanup requirements under the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) and those currently proposed under Subpart S of the Resource Conservation and Recovery Act (RCRA). The history and regulatory framework for both laws is discussed, and the process for environmental restoration actions under both regulatory programs is compared and contrasted. Contaminants regulated under CERCLA and RCRA differ significantly in that radioactive contaminants are subject to Environmental Protection Agency jurisdiction only under CERCLA. The DOE has the jurisdiction to implement radioactive waste management and cleanup levels under the Atomic Energy Act (AEA) at nuclear weapons facilities. For sites with significant amounts of contaminants which are radioactive only, cleanup under RCRA can present significant advantages, since the DOE can then manage restoration activities under its own authority. There are, conversely several significant advantages for a remedial action being conducted at a CERCLA site recognized on the National Priorities List (NPL). Other provisions in the CERCLA remediation and the RCRA corrective action process offer both advantages and disadvantages related to DOE environmental restoration programs. This paper presents a discussion of significant issues which should be considered in such negotiations

  11. Facility or Facilities? That is the Question.

    Viso, M.

    2018-04-01

    The management of the martian samples upon arrival on the Earth will require a lot of work to ensure a safe life detection and biohazard testing during the quarantine. This will induce a sharing of the load between several facilities.

  12. 40 CFR 256.42 - Recommendations for assuring facility development.

    2010-07-01

    ... facilities and practices to be developed by responsible State and substate agencies or by the private sector... sector initiatives in order to meet the identified facility needs. (e) In any area having fewer than 2... establish procedures for choosing which facilities will get priority for technical or financial assistance...

  13. Gynecological brachytherapy - from low-dose-rate to high-tech. Gynaekologische Brachytherapie - von Low-dose-rate zu High-tech

    Herrmann, T. (Abt. Strahlenthgerapie, Klinik und Poliklinik fuer Radiologie, Medizinische Akademie ' Carl Gustav Carus' , Dresden (Germany)); Christen, N. (Abt. Strahlenthgerapie, Klinik und Poliklinik fuer Radiologie, Medizinische Akademie ' Carl Gustav Carus' , Dresden (Germany)); Alheit, H.D. (Abt. Strahlenthgerapie, Klinik und Poliklinik fuer Radiologie, Medizinische Akademie ' Carl Gustav Carus' , Dresden (Germany))

    1993-03-01

    The transition from low-dose-rate (LDR) brachytherapy to high-dose-rate (HDR) afterloading treatment is in progress in most centres of radiation therapy. First reports of studies comparing HDR and LDR treatment in cervix cancer demonstrate nearly equal local control. In our own investigations on 319 patients with primary irradiated carcinoma of the cervix (125 HDR/194 LDR) we found the following control rates: Stage FIGO I 95.4%/82.9% (HDR versus LDR), stage FIGO II 71.4%/73.7%, stage FIGO III 57.9%/38.5%. The results are not significant. The side effects - scored after EORT/RTOG criteria - showed no significant differences between both therapies for serious radiogenic late effects on intestine, bladder and vagina. The study and findings from the literature confirm the advantage of the HDR-procedure for patient and radiooncologist and for radiation protection showing at least the same results as in the LDR-area. As for radiobiolgical point of view it is important to consider that the use of fractionation in the HDR-treatment is essential for the sparing of normal tissues and therefore a greater number of small fractionation doses in the brachytherapy should be desirable too. On the other hand the rules, which are true for fractionated percutaneous irradiation therapy (overall treatment time as short as possible to avoid reppopulation of tumor cells) should be taken into consideration in combined brachy-teletherapy regime in gynecologic tumors. The first step in this direction may be accelerated regime with a daily application of both treatment procedures. The central blocking of the brachytherapy region from the whole percutaneous treatment target volume should be critically reflected, especially in the case of advanced tumors. (orig.)

  14. Design Criteria: School Food Service Facilities.

    Florida State Dept. of Education, Tallahassee.

    This guide is intended for architects, district superintendents, and food service directors whose responsibility it is to plan food service facilities. It first discusses the factors to be considered in food service planning, presents cost studies, and lists the responsibilities of those involved in the planning. Other sections concern selection,…

  15. Facilities inventory protection for nuclear facilities

    Schmitt, F.J.

    1989-01-01

    The fact that shut-down applications have been filed for nuclear power plants, suggests to have a scrutinizing look at the scopes of assessment and decision available to administrations and courts for the protection of facilities inventories relative to legal and constitutional requirements. The paper outlines the legal bases which need to be observed if purposeful calculation is to be ensured. Based on the different actual conditions and legal consequences, the author distinguishes between 1) the legal situation of facilities licenced already and 2) the legal situation of facilities under planning during the licencing stage. As indicated by the contents and restrictions of the pertinent provisions of the Atomic Energy Act and by the corresponding compensatory regulation, the object of the protection of facilities inventor in the legal position of the facility owner within the purview of the Atomic Energy Act, and the licensing proper. Art. 17 of the Atomic Energy Act indicates the legislators intent that, once issued, the licence will be the pivotal point for regulations aiming at protection and intervention. (orig./HSCH) [de

  16. Facility certification program for coal miners pneumoconiosis

    Trout, E.D.; Kelley, J.P.; Larson, V.L.; Herbert, G.L.

    1976-01-01

    Public Law 91-173, often referred to as the Black Lung Law, called for a chest radiograph of all active coal miners at stated intervals. The National Institute for Occupational Safety and Health was responsible for carrying out the provisions of the law. Among other requirements was a provision for certification of radiological facilities where radiological examinations would be provide. A test object to be radiographed by each such facility was designed and sent to those facilities applying for certification. To date, 284 facilities have applied for certification of which 215 have been approved. A record has been kept of the number of times any approved facility submitted radiographs before approval. A complete listing of the types of equipment used, personnel qualifications and other pertinent data will be reported

  17. Grout treatment facility dangerous waste permit application

    1992-07-01

    The Grout Treatment Facility (GTF) will provide permanent disposal for approximately 43 Mgal of low-level radioactive liquid waste currently being stored in underground tanks on the Hanford Site. The first step in permanent disposal is accomplished by solidifying the liquid waste with cementitious dry materials. The resulting grout is cast within underground vaults. This report on the GTF contains information on the following: Geologic data, hydrologic data, groundwater monitoring program, information, detection monitoring program, groundwater characterization drawings, building emergency plan--grout treatment facility, response action plan for grout treatment facility, Hanford Facility contingency plan, training course descriptions, overview of the Hanford Facility Grout Performance, assessment, bland use and zoning map, waste minimization plan, cover design engineering report, and clay liners (ADMIXTURES) in semiarid environments

  18. Facilities projects performance measurement system

    Erben, J.F.

    1979-01-01

    The two DOE-owned facilities at Hanford, the Fuels and Materials Examination Facility (FMEF), and the Fusion Materials Irradiation Test Facility (FMIT), are described. The performance measurement systems used at these two facilities are next described

  19. Evaluation of existing United States' facilities for use as a mixed-oxide (MOX) fuel fabrication facility for plutonium disposition

    Beard, C.A.; Buksa, J.J.; Chidester, K.; Eaton, S.L.; Motley, F.E.; Siebe, D.A.

    1995-01-01

    A number of existing US facilities were evaluated for use as a mixed-oxide fuel fabrication facility for plutonium disposition. These facilities include the Fuels Material Examination Facility (FMEF) at Hanford, the Washington Power Supply Unit 1 (WNP-1) facility at Hanford, the Barnwell Nuclear Fuel Plant (BNFP) at Barnwell, SC, the Fuel Processing Facility (FPF) at Idaho National Engineering Laboratory (INEL), the Device Assembly Facility (DAF) at the Nevada Test Site (NTS), and the P-reactor at the Savannah River Site (SRS). The study consisted of evaluating each facility in terms of available process space, available building support systems (i.e., HVAC, security systems, existing process equipment, etc.), available regional infrastructure (i.e., emergency response teams, protective force teams, available transportation routes, etc.), and ability to integrate the MOX fabrication process into the facility in an operationally-sound manner that requires a minimum amount of structural modifications

  20. 340 Facility compliance assessment

    English, S.L.

    1993-10-01

    This study provides an environmental compliance evaluation of the RLWS and the RPS systems of the 340 Facility. The emphasis of the evaluation centers on compliance with WAC requirements for hazardous and mixed waste facilities, federal regulations, and Westinghouse Hanford Company (WHC) requirements pertinent to the operation of the 340 Facility. The 340 Facility is not covered under either an interim status Part A permit or a RCRA Part B permit. The detailed discussion of compliance deficiencies are summarized in Section 2.0. This includes items of significance that require action to ensure facility compliance with WAC, federal regulations, and WHC requirements. Outstanding issues exist for radioactive airborne effluent sampling and monitoring, radioactive liquid effluent sampling and monitoring, non-radioactive liquid effluent sampling and monitoring, less than 90 day waste storage tanks, and requirements for a permitted facility

  1. Trauma facilities in Denmark

    Weile, Jesper; Nielsen, Klaus; Primdahl, Stine C

    2018-01-01

    Background: Trauma is a leading cause of death among adults aged challenge. Evidence supports the centralization of trauma facilities and the use multidisciplinary trauma teams. Because knowledge is sparse on the existing distribution of trauma facilities...... and the organisation of trauma care in Denmark, the aim of this study was to identify all Danish facilities that care for traumatized patients and to investigate the diversity in organization of trauma management. Methods: We conducted a systematic observational cross-sectional study. First, all hospitals in Denmark...... were identified via online services and clarifying phone calls to each facility. Second, all trauma care manuals on all facilities that receive traumatized patients were gathered. Third, anesthesiologists and orthopedic surgeons on call at all trauma facilities were contacted via telephone...

  2. Security of pipeline facilities

    Lee, S.C. [Alberta Energy and Utilities Board, Calgary, AB (Canada); Van Egmond, C.; Duquette, L. [National Energy Board, Calgary, AB (Canada); Revie, W. [Canada Centre for Mineral and Energy Technology, Ottawa, ON (Canada)

    2005-07-01

    This working group provided an update on provincial, federal and industry directions regarding the security of pipeline facilities. The decision to include security issues in the NEB Act was discussed as well as the Pipeline Security Management Assessment Project, which was created to establish a better understanding of existing security management programs as well as to assist the NEB in the development and implementation of security management regulations and initiatives. Amendments to the NEB were also discussed. Areas of pipeline security management assessment include physical safety management; cyber and information security management; and personnel security. Security management regulations were discussed, as well as implementation policies. Details of the Enbridge Liquids Pipelines Security Plan were examined. It was noted that the plan incorporates flexibility for operations and is integrated with Emergency Response and Crisis Management. Asset characterization and vulnerability assessments were discussed, as well as security and terrorist threats. It was noted that corporate security threat assessment and auditing are based on threat information from the United States intelligence community. It was concluded that the oil and gas industry is a leader in security in North America. The Trans Alaska Pipeline Incident was discussed as a reminder of how costly accidents can be. Issues of concern for the future included geographic and climate issues. It was concluded that limited resources are an ongoing concern, and that the regulatory environment is becoming increasingly prescriptive. Other concerns included the threat of not taking international terrorism seriously, and open media reporting of vulnerability of critical assets, including maps. tabs., figs.

  3. Nuclear physics accelerator facilities

    1985-01-01

    The Department of Energy's Nuclear Physics program is a comprehensive program of interdependent experimental and theoretical investigation of atomic nuclei. Long range goals are an understanding of the interactions, properties, and structures of atomic nuclei and nuclear matter at the most elementary level possible and an understanding of the fundamental forces of nature by using nuclei as a proving ground. Basic ingredients of the program are talented and imaginative scientists and a diversity of facilities to provide the variety of probes, instruments, and computational equipment needed for modern nuclear research. Approximately 80% of the total Federal support of basic nuclear research is provided through the Nuclear Physics program; almost all of the remaining 20% is provided by the National Science Foundation. Thus, the Department of Energy (DOE) has a unique responsibility for this important area of basic science and its role in high technology. Experimental and theoretical investigations are leading us to conclude that a new level of understanding of atomic nuclei is achievable. This optimism arises from evidence that: (1) the mesons, protons, and neutrons which are inside nuclei are themselves composed of quarks and gluons and (2) quantum chromodynamics can be developed into a theory which both describes correctly the interaction among quarks and gluons and is also an exact theory of the strong nuclear force. These concepts are important drivers of the Nuclear Physics program

  4. Synchrotron radiation facilities

    1972-01-01

    Particularly in the past few years, interest in using the synchrotron radiation emanating from high energy, circular electron machines has grown considerably. In our February issue we included an article on the synchrotron radiation facility at Frascati. This month we are spreading the net wider — saying something about the properties of the radiation, listing the centres where synchrotron radiation facilities exist, adding a brief description of three of them and mentioning areas of physics in which the facilities are used.

  5. Facility of aerosol filtration

    Duverger de Cuy, G; Regnier, J

    1975-04-18

    Said invention relates to a facility of aerosol filtration, particularly of sodium aerosols. Said facility is of special interest for fast reactors where sodium fires involve the possibility of high concentrations of sodium aerosols which soon clog up conventional filters. The facility intended for continuous operation, includes at the pre-filtering stage, means for increasing the size of the aerosol particles and separating clustered particles (cyclone separator).

  6. Emergency planning for fuel cycle facilities

    Lacey, L.R.

    1991-01-01

    In April 1989, NRC published new emergency planning regulations which apply to certain by-product, source, and special nuclear materials licensees including most fuel cycle facilities. In addition to these NRC regulations, other regulatory agencies such as EPA, OSHA, and DOT have regulations concerning emergency planning or notification that may apply to fuel cycle facilities. Emergency planning requirements address such areas as emergency classification, organization, notification and activation, assessment, corrective and protective measures, emergency facilities and equipment, maintaining preparedness, records and reports, and recovery. This article reviews applicable regulatory requirements and guidance, then concentrates on implementation strategies to produce an effective emergency response capability

  7. Textiles Performance Testing Facilities

    Federal Laboratory Consortium — The Textiles Performance Testing Facilities has the capabilities to perform all physical wet and dry performance testing, and visual and instrumental color analysis...

  8. Geodynamics Research Facility

    Federal Laboratory Consortium — This GSL facility has evolved over the last three decades to support survivability and protective structures research. Experimental devices include three gas-driven...

  9. Materials Characterization Facility

    Federal Laboratory Consortium — The Materials Characterization Facility enables detailed measurements of the properties of ceramics, polymers, glasses, and composites. It features instrumentation...

  10. Mobile Solar Tracker Facility

    Federal Laboratory Consortium — NIST's mobile solar tracking facility is used to characterize the electrical performance of photovoltaic panels. It incorporates meteorological instruments, a solar...

  11. Proximal Probes Facility

    Federal Laboratory Consortium — The Proximal Probes Facility consists of laboratories for microscopy, spectroscopy, and probing of nanostructured materials and their functional properties. At the...

  12. Geospatial Data Analysis Facility

    Federal Laboratory Consortium — Geospatial application development, location-based services, spatial modeling, and spatial analysis are examples of the many research applications that this facility...

  13. Facility Environmental Management System

    Federal Laboratory Consortium — This is the Web site of the Federal Highway Administration's (FHWA's) Turner-Fairbank Highway Research Center (TFHRC) facility Environmental Management System (EMS)....

  14. Heated Tube Facility

    Federal Laboratory Consortium — The Heated Tube Facility at NASA GRC investigates cooling issues by simulating conditions characteristic of rocket engine thrust chambers and high speed airbreathing...

  15. Magnetics Research Facility

    Federal Laboratory Consortium — The Magnetics Research Facility houses three Helmholtz coils that generate magnetic fields in three perpendicular directions to balance the earth's magnetic field....

  16. Transonic Experimental Research Facility

    Federal Laboratory Consortium — The Transonic Experimental Research Facility evaluates aerodynamics and fluid dynamics of projectiles, smart munitions systems, and sub-munitions dispensing systems;...

  17. Engine Test Facility (ETF)

    Federal Laboratory Consortium — The Air Force Arnold Engineering Development Center's Engine Test Facility (ETF) test cells are used for development and evaluation testing of propulsion systems for...

  18. Target Assembly Facility

    Federal Laboratory Consortium — The Target Assembly Facility integrates new armor concepts into actual armored vehicles. Featuring the capability ofmachining and cutting radioactive materials, it...

  19. Pavement Testing Facility

    Federal Laboratory Consortium — Comprehensive Environmental and Structural AnalysesThe ERDC Pavement Testing Facility, located on the ERDC Vicksburg campus, was originally constructed to provide an...

  20. Composite Structures Manufacturing Facility

    Federal Laboratory Consortium — The Composite Structures Manufacturing Facility specializes in the design, analysis, fabrication and testing of advanced composite structures and materials for both...

  1. GPS Test Facility

    Federal Laboratory Consortium — The Global Positioning System (GPS) Test Facility Instrumentation Suite (GPSIS) provides great flexibility in testing receivers by providing operational control of...

  2. Manufacturing Demonstration Facility (MDF)

    Federal Laboratory Consortium — The U.S. Department of Energy Manufacturing Demonstration Facility (MDF) at Oak Ridge National Laboratory (ORNL) provides a collaborative, shared infrastructure to...

  3. Surplus Facilities Management Program

    Coobs, J.H.

    1983-01-01

    This is the second of two programs that are concerned with the management of surplus facilities. The facilities in this program are those related to commercial activities, which include the three surplus experimental and test reactors [(MSRE, HRE-2, and the Low Intensity Test Reactor (LITR)] and seven experimental loops at the ORR. The program is an integral part of the Surplus Facilities Management Program, which is a national program administered for DOE by the Richland Operations Office. Very briefly reported here are routine surveillance and maintenance of surplus radioactively contaminated DOE facilities awaiting decommissioning

  4. Imagery Data Base Facility

    Federal Laboratory Consortium — The Imagery Data Base Facility supports AFRL and other government organizations by providing imagery interpretation and analysis to users for data selection, imagery...

  5. Neutron Therapy Facility

    Federal Laboratory Consortium — The Neutron Therapy Facility provides a moderate intensity, broad energy spectrum neutron beam that can be used for short term irradiations for radiobiology (cells)...

  6. Universal Drive Train Facility

    Federal Laboratory Consortium — This vehicle drive train research facility is capable of evaluating helicopter and ground vehicle power transmission technologies in a system level environment. The...

  7. High Combustion Research Facility

    Federal Laboratory Consortium — At NETL's High-Pressure Combustion Research Facility in Morgantown, WV, researchers can investigate new high-pressure, high-temperature hydrogen turbine combustion...

  8. Catalytic Fuel Conversion Facility

    Federal Laboratory Consortium — This facility enables unique catalysis research related to power and energy applications using military jet fuels and alternative fuels. It is equipped with research...

  9. Flexible Electronics Research Facility

    Federal Laboratory Consortium — The Flexible Electronics Research Facility designs, synthesizes, tests, and fabricates materials and devices compatible with flexible substrates for Army information...

  10. DUPIC facility engineering

    Park, J. J.; Lee, H. H.; Kim, K. H. and others

    2000-03-01

    The objectives of this study are (1) the refurbishment for PIEF(Post Irradiation Examination Facility) and M6 hot-cell in IMEF(Irradiated Material Examination Facility), (2) the establishment of the compatible facility for DUPIC fuel fabrication experiments which is licensed by government organization, and (3) the establishment of the transportation system and transportation cask for nuclear material between facilities. The report for this project describes following contents, such as objectives, necessities, scope, contents, results of current step, R and D plan in future and etc.

  11. Facility effluent monitoring plan determinations for the 400 Area facilities

    Nickels, J.M.

    1991-09-01

    This Facility Effluent Monitoring Plan determination resulted from an evaluation conducted for the Westinghouse Hanford Company 400 Area facilities on the Hanford Site. The Facility Effluent Monitoring Plan determinations have been prepared in accordance with A Guide for Preparing Hanford Site Facility Effluent Monitoring Plans. Two major Westinghouse Hanford Company facilities in the 400 Area were evaluated: the Fast Flux Test Facility and the Fuels Manufacturing and examination Facility. The determinations were prepared by Westinghouse Hanford Company. Of these two facilities, only the Fast Flux Test Facility will require a Facility Effluent Monitoring Plan. 7 refs., 5 figs., 4 tabs

  12. Earthquake engineering for nuclear facilities

    Kuno, Michiya

    2017-01-01

    This book is a comprehensive compilation of earthquake- and tsunami-related technologies and knowledge for the design and construction of nuclear facilities. As such, it covers a wide range of fields including civil engineering, architecture, geotechnical engineering, mechanical engineering, and nuclear engineering, for the development of new technologies providing greater resistance against earthquakes and tsunamis. It is crucial both for students of nuclear energy courses and for young engineers in nuclear power generation industries to understand the basics and principles of earthquake- and tsunami-resistant design of nuclear facilities. In Part I, "Seismic Design of Nuclear Power Plants", the design of nuclear power plants to withstand earthquakes and tsunamis is explained, focusing on buildings, equipment's, and civil engineering structures. In Part II, "Basics of Earthquake Engineering", fundamental knowledge of earthquakes and tsunamis as well as the dynamic response of structures and foundation ground...

  13. The internationalisation of research facilities

    Sabine, T.M.

    1999-01-01

    Full text: During the past twenty five years arrangements have been made for sharing the use of major national research facilities amongst the world community of neutron users. The administrative requirements are simple. Scientists are invited to apply for measurement time. The scientific merit of the application is assessed by a committee appointed by the host organisation. If the application is considered to have sufficient merit time is allocated. The only costs to the user are transport and living expenses. These arrangements have advantages for users and for hosts. The user can apply for time on the most suitable instrument. The host in the user country is freed from the responsibility of supplying all instruments. It can specialise in those instruments in which it has particular expertise. The host retains, through its committee, complete control over the use of instruments. The amount of time allocated to international users is dependent on the national demand. The result is efficient use of national facilities. An equally important result is the interaction between members of the international scientific community. Australian scientists routinely use overseas facilities however Australia has refused to join the international group. There is international resentment to this attitude. We have, for example powder diffraction facilities which others wish to use. We have no small-angle scattering facilities and must do our experiments at international centres. I will argue that we should join the international community now. The capacity of the replacement reactor will be far greater than the internal Australian requirements. We will become the natural host for users from countries in the Asian region. To enable us to make a smooth transition to this stage we should immediately advertise an international program for HIFAR

  14. Physical security of nuclear facilities

    Dixon, H.

    1987-01-01

    A serious problem with present security systems at nuclear facilities is that the threats and standards prepared by the NRC and DOE are general, and the field offices are required to develop their own local threats and, on that basis, to prepared detailed specifications for security systems at sites in their jurisdiction. As a result, the capabilities of the systems vary across facilities. Five steps in particular are strongly recommended as corrective measures: 1. Those agencies responsible for civil nuclear facilities should jointly prepare detailed threat definitions, operational requirements, and equipment specifications to protect generic nuclear facilities, and these matters should be issued as policy. The agencies should provide sufficient detail to guide the design of specific security systems and to identify candidate components. 2. The DOE, NRC, and DOD should explain to Congress why government-developed security and other military equipment are not used to upgrade existing security systems and to stock future ones. 3. Each DOE and NRC facility should be assessed to determine the impact on the size of the guard force and on warning time when personnel-detecting radars and ground point sensors are installed. 4. All security guards and technicians should be investigated for the highest security clearance, with reinvestigations every four years. 5. The processes and vehicles used in intrafacility transport of nuclear materials should be evaluated against a range of threats and attack scenarios, including violent air and vehicle assaults. All of these recommendations are feasible and cost-effective. The appropriate congressional subcommittees should direct that they be implemented as soon as possible

  15. Safety of magnetic fusion facilities: Guidance

    1996-05-01

    This document provides guidance for the implementation of the requirements identified in DOE-STD-6002-96, Safety of Magnetic Fusion Facilities: Requirements. This guidance is intended for the managers, designers, operators, and other personnel with safety responsibilities for facilities designated as magnetic fusion facilities. While the requirements in DOE-STD-6002-96 are generally applicable to a wide range of fusion facilities, this Standard, DOE-STD-6003-96, is concerned mainly with the implementation of those requirements in large facilities such as the International Thermonuclear Experimental Reactor (ITER). Using a risk-based prioritization, the concepts presented here may also be applied to other magnetic fusion facilities. This Standard is oriented toward regulation in the Department of Energy (DOE) environment as opposed to regulation by other regulatory agencies. As the need for guidance involving other types of fusion facilities or other regulatory environments emerges, additional guidance volumes should be prepared. The concepts, processes, and recommendations set forth here are for guidance only. They will contribute to safety at magnetic fusion facilities

  16. University multi-user facility survey-2010.

    Riley, Melissa B

    2011-12-01

    Multi-user facilities serve as a resource for many universities. In 2010, a survey was conducted investigating possible changes and successful characteristics of multi-user facilities, as well as identifying problems in facilities. Over 300 surveys were e-mailed to persons identified from university websites as being involved with multi-user facilities. Complete responses were received from 36 facilities with an average of 20 years of operation. Facilities were associated with specific departments (22%), colleges (22%), and university research centers (8.3%) or were not affiliated with any department or college within the university (47%). The five most important factors to succeed as a multi-user facility were: 1) maintaining an experienced, professional staff in an open atmosphere; 2) university-level support providing partial funding; 3) broad client base; 4) instrument training programs; and 5) an effective leader and engaged strategic advisory group. The most significant problems were: 1) inadequate university financial support and commitment; 2) problems recovering full service costs from university subsidies and user fees; 3) availability of funds to repair and upgrade equipment; 4) inability to retain highly qualified staff; and 5) unqualified users dirtying/damaging equipment. Further information related to these issues and to fee structure was solicited. Overall, there appeared to be a decline in university support for facilities and more emphasis on securing income by serving clients outside of the institution and by obtaining grants from entities outside of the university.

  17. Green facility location

    Velázquez Martínez, J.C.; Fransoo, J.C.; Bouchery, Y.; Corbett, C.J.; Fransoo, J.C.; Tan, T.

    2017-01-01

    Transportation is one of the main contributing factors of global carbon emissions, and thus, when dealing with facility location models in a distribution context, transportation emissions may be substantially higher than the emissions due to production or storage. Because facility location models

  18. A Remote WIRELESS Facility

    Kees Uiterwijk

    2007-10-01

    Full Text Available Continuing need for available distance learning facilities has led to the development of a remote lab facility focusing on wireless technology. In the field of engineering there is a student need of gaining experience in set-up, monitoring and maintenance of 802.11A/B/G based wireless LAN environments.

  19. Medical cyclotron facilities

    1984-09-01

    This report examines the separate proposals from the Austin Hospital and the Australian Atomic Energy Commission for a medical cyclotron facility. The proponents have argued that a cyclotron facility would benefit Australia in areas of patient care, availability and export of radioisotopes, and medical research. Positron emission tomography (PET) and neutron beam therapy are also examined

  20. Global Environment Facility |

    environment Countries pledge US$4.1 billion to the Global Environment Facility Ringtail lemur mom with two of paradise Nations rally to protect global environment Countries pledge US$4.1 billion to the Global Environment Facility Stockholm, Sweden birds-eye view Events GEF-7 Replenishment Trung Truong Son Landscapes