Simultaneous determination of difenoconazole, trifloxystrobin and its metabolite trifloxystrobin acid residues in watermelon under field conditions by GC-MS/MS.

Science.gov (United States)

Kang, Di; Zhang, Haizhen; Chen, Yuling; Wang, Fei; Shi, Lihong; Hu, Deyu; Zhang, Kankan

2017-11-01

An optimized quick, easy, cheap, effective, rugged and safe method for the simultaneous determination of difenoconazole, trifloxystrobin and its metabolite trifloxystrobin acid residues in watermelon and soil was developed and validated by gas chromatography with tandem mass spectrometry. The samples were extracted with acetonitrile (1% formic acid) and cleaned up by dispersive solid-phase extraction with octadecylsilane sorbent. The limit of quantification of the method was 0.01 mg/kg, and the limit of detection was 0.003 mg/kg for all three analytes. The recoveries of the fungicides in watermelon, pulp and soil were 72.32-99.20% for difenoconazole, 74.68-87.72% for trifloxystrobin and 78.59-92.66% for trifloxystrobin acid with relative standard deviations of 1.34-14.04%. The dissipation dynamics of difenoconazole and trifloxystrobin in watermelon and soil followed the first-order kinetics with half-lives of 3.2-8.8 days in both locations. The final residue levels of difenoconazole and trifloxystrobin were below 0.1 mg/kg (maximum residue level [MRL] set by China) and 0.2 mg/kg (MRL set by European Union), respectively, in pulp samples collected 14 days after the last application. These results could help Chinese authorities to establish MRL of trifloxystrobin in watermelon and provide guidance for the safe and proper application of both fungicides on watermelon. Copyright © 2017 John Wiley & Sons, Ltd.

Validation of QuEChERS method for the determination of some pesticide residues in two apple varieties.

Science.gov (United States)

Tiryaki, Osman

2016-10-02

This study was undertaken to validate the "quick, easy, cheap, effective, rugged and safe" (QuEChERS) method using Golden Delicious and Starking Delicious apple matrices spiked at 0.1 maximum residue limit (MRL), 1.0 MRL and 10 MRL levels of the four pesticides (chlorpyrifos, dimethoate, indoxacarb and imidacloprid). For the extraction and cleanup, original QuEChERS method was followed, then the samples were subjected to liquid chromatography-triple quadrupole mass spectrometry (LC-MS/MS) for chromatographic analyses. According to t test, matrix effect was not significant for chlorpyrifos in both sample matrices, but it was significant for dimethoate, indoxacarb and imidacloprid in both sample matrices. Thus, matrix-matched calibration (MC) was used to compensate matrix effect and quantifications were carried out by using MC. The overall recovery of the method was 90.15% with a relative standard deviation of 13.27% (n = 330). Estimated method detection limit of analytes blew the MRLs. Some other parameters of the method validation, such as recovery, precision, accuracy and linearity were found to be within the required ranges.

Food safety in Thailand 4: comparison of pesticide residues found in three commonly consumed vegetables purchased from local markets and supermarkets in Thailand

Directory of Open Access Journals (Sweden)

Sompon Wanwimolruk

2016-09-01

Full Text Available Background The wide use of pesticides raises concerns on the health risks associated with pesticide exposure. For developing countries, like Thailand, pesticide monitoring program (in vegetables and fruits and also the maximum residue limits (MRL regulation have not been entirely implemented. The MRL is a product limit, not a safety limit. The MRL is the maximum concentration of a pesticide residue (expressed as mg/kg recommended by the Codex Alimentarius Commission to be legally permitted in or on food commodities and animal feeds (Codex Alimentarius Commission, 2015; European Commission, 2015. MRLs are based on supervised residue trial data where the pesticide has been applied in accordance with GAP (Good Agricultural Practice. This study aims at providing comparison data on pesticide residues found in three commonly consumed vegetables (Chinese kale, pakchoi and morning glory purchased from some local markets and supermarkets in Thailand. Methods These vegetables were randomly bought from local markets and supermarkets. Then they were analyzed for the content of 28 pesticides by using GC-MS/MS. Results Types of pesticides detected in the samples either from local markets or supermarkets were similar. The incidence of detected pesticides was 100% (local markets and 99% (supermarkets for the Chinese kale; 98% (local markets and 100% (supermarkets for the pakchoi; and 99% (local markets and 97% (supermarkets for the morning glory samples. The pesticides were detected exceeding their MRL at a rate of 48% (local markets and 35% (supermarkets for the Chinese kale; 71% (local markets and 55% (supermarkets for the pakchoi, and 42% (local markets and 49% (supermarkets for the morning glory. Discussion These rates are much higher than those seen in developed countries. It should be noted that these findings were assessed on basis of using criteria (such as MRL obtained from developed countries. Our findings were also confined to these vegetables sold

Sunlight triggers cutaneous lupus through a CSF-1-dependent mechanism in MRL-Fas(lpr) mice.

Science.gov (United States)

Menke, Julia; Hsu, Mei-Yu; Byrne, Katelyn T; Lucas, Julie A; Rabacal, Whitney A; Croker, Byron P; Zong, Xiao-Hua; Stanley, E Richard; Kelley, Vicki R

2008-11-15

Sunlight (UVB) triggers cutaneous lupus erythematosus (CLE) and systemic lupus through an unknown mechanism. We tested the hypothesis that UVB triggers CLE through a CSF-1-dependent, macrophage (Mø)-mediated mechanism in MRL-Fas(lpr) mice. By constructing mutant MRL-Fas(lpr) strains expressing varying levels of CSF-1 (high, intermediate, none), and use of an ex vivo gene transfer to deliver CSF-1 intradermally, we determined that CSF-1 induces CLE in lupus-susceptible MRL-Fas(lpr) mice, but not in lupus-resistant BALB/c mice. UVB incites an increase in Møs, apoptosis in the skin, and CLE in MRL-Fas(lpr), but not in CSF-1-deficient MRL-Fas(lpr) mice. Furthermore, UVB did not induce CLE in BALB/c mice. Probing further, UVB stimulates CSF-1 expression by keratinocytes leading to recruitment and activation of Møs that, in turn, release mediators, which induce apoptosis in keratinocytes. Thus, sunlight triggers a CSF-1-dependent, Mø-mediated destructive inflammation in the skin leading to CLE in lupus-susceptible MRL-Fas(lpr) but not lupus-resistant BALB/c mice. Taken together, CSF-1 is envisioned as the match and lupus susceptibility as the tinder leading to CLE.

Acephate and buprofezin residues in olives and olive oil.

Science.gov (United States)

Cabras, P; Angioni, A; Garau, V L; Pirisi, F M; Cabitza, F; Pala, M

2000-10-01

Field trials were carried out to study the persistence of acephate and buprofezin on olives. Two cultivars, pizz'e carroga and pendolino, with very large and small fruits respectively were used. After treatment, no difference was found between the two pesticide deposits on the olives. The disappearance rates, calculated as pseudo first order kinetics, were similar for both pesticides (on average 12 days). Methamidophos, the acephate metabolite, was always present on all olives, and in some pendolino samples it showed higher residues than the maximum residue limit (MRL). During washing, the first step of olive processing, the residue level of both pesticides on the olives did not decrease. After processing of the olives into oil, no residues of acephate or methamidophos were found in the olive oil, while the residues of buprofezin were on average four times higher than on olives.

Monitoring pesticides residues and contaminants for some leafy vegetables at the market level

International Nuclear Information System (INIS)

Ibrahim, A. B. H.

2004-03-01

Pesticide residues and contaminants in selected leafy vegetables, namely (lettuce, garden rocket and salad onion) were monitored at market level in Riyadh City in Saudi Arabia, during the period june to july 2001. Fifteen samples of vegetables from the City vegetable market of Riyadh were collected and subjected to multi-pesticide residue detection and analysis by gas chromatography with mass spectrometer and electron capture detectors (GC/MS,ECD). Results of sample extracts analysis showed that the two vegetables of: garden rocket and salad onion contain pesticide residues and contaminants which have no Maximum Residue Limits (MRL) prescribed by Codex Alimentarius Commission (CAC) collaborate with World Health and Food and Agriculture Organizations (WHO/FAO). Whereas lettuce vegetable was found free of any identified pesticide residues or contaminants. Garden rocket was shown to contain dibutyl phthalate (0.04 ppm)-steryl chloride (0.02 ppm) tridecane (0.06 ppm)-hexadecane (0.07 ppm)-BIS (ethylhexyl) phthalate (0.006 ppm) and pyridinium, 1-hexyl chloride (0.01 ppm). The salad onion was found to contain 9-octadecanamide (0.13 ppm)-tridecane (0.15 ppm) and tetradecane (0.16 ppm). There are no established MRL s for these pesticides and contaminants detected in garden rocket and salad onion, although when impacts on human health were reviewed some of them were found probably hazardous. (Author)

Detection of Residual Levels and Associated Health Risk of Seven Pesticides in Fresh Eggplant and Tomato Samples from Narayanganj District, Bangladesh

Directory of Open Access Journals (Sweden)

Md. Nur Alam

2015-01-01

Full Text Available Residual levels of seven frequently used pesticides were investigated in 140 samples of two common vegetables, eggplants and tomatoes, from agricultural fields in the Narayanganj district of Bangladesh. The analysis of pesticide residues was performed by high-performance liquid chromatography with photodiode array detection. A large percentage of the eggplants (50% and tomatoes (60% from the Narayanganj district were contaminated with pesticides, and all of the levels were above the maximum residual limit (MRL proposed by the EC regulation. Diazinon was the most common (35% pesticide detected in the vegetable samples at a concentration of 45–450 times higher than the MRL. The health risk index for diazinon was highest for both eggplant and tomato samples, which may be due to its physiochemical properties. Fenitrothion and linuron are the two second most common types of pesticides detected in the vegetable samples. Regular monitoring of the use of common pesticides on vegetables should be conducted.

Suitability of the charm HVS and a microbiological multiplate system for detection of residues in raw milk at EU maximum residue levels

NARCIS (Netherlands)

Nouws, J.F.M.; Egmond, van H.; Loeffen, G.; Schouten, J.; Keukens, H.; Smulders, I.; Stegeman, H.

1999-01-01

In this paper we assessed the suitability of the Charm HVS and a newly developed microbiological multiplate system as post-screening tests to confirm the presence of residues in raw milk at or near the maximum permissible residue level (MRL). The multiplate system is composed of Bacillus

Defects in the peripheral taste structure and function in the MRL/lpr mouse model of autoimmune disease.

Directory of Open Access Journals (Sweden)

Agnes Kim

Full Text Available While our understanding of the molecular and cellular aspects of taste reception and signaling continues to improve, the aberrations in these processes that lead to taste dysfunction remain largely unexplored. Abnormalities in taste can develop in a variety of diseases, including infections and autoimmune disorders. In this study, we used a mouse model of autoimmune disease to investigate the underlying mechanisms of taste disorders. MRL/MpJ-Fas(lpr/J (MRL/lpr mice develop a systemic autoimmunity with phenotypic similarities to human systemic lupus erythematosus and Sjögren's syndrome. Our results show that the taste tissues of MRL/lpr mice exhibit characteristics of inflammation, including infiltration of T lymphocytes and elevated levels of some inflammatory cytokines. Histological studies reveal that the taste buds of MRL/lpr mice are smaller than those of wild-type congenic control (MRL/+/+ mice. 5-Bromo-2'-deoxyuridine (BrdU pulse-chase experiments show that fewer BrdU-labeled cells enter the taste buds of MRL/lpr mice, suggesting an inhibition of taste cell renewal. Real-time RT-PCR analyses show that mRNA levels of several type II taste cell markers are lower in MRL/lpr mice. Immunohistochemical analyses confirm a significant reduction in the number of gustducin-positive taste receptor cells in the taste buds of MRL/lpr mice. Furthermore, MRL/lpr mice exhibit reduced gustatory nerve responses to the bitter compound quinine and the sweet compound saccharin and reduced behavioral responses to bitter, sweet, and umami taste substances compared with controls. In contrast, their responses to salty and sour compounds are comparable to those of control mice in both nerve recording and behavioral experiments. Together, our results suggest that type II taste receptor cells, which are essential for bitter, sweet, and umami taste reception and signaling, are selectively affected in MRL/lpr mice, a model for autoimmune disease with chronic

Nonparametric Bayesian inference for mean residual life functions in survival analysis.

Science.gov (United States)

Poynor, Valerie; Kottas, Athanasios

2018-01-19

Modeling and inference for survival analysis problems typically revolves around different functions related to the survival distribution. Here, we focus on the mean residual life (MRL) function, which provides the expected remaining lifetime given that a subject has survived (i.e. is event-free) up to a particular time. This function is of direct interest in reliability, medical, and actuarial fields. In addition to its practical interpretation, the MRL function characterizes the survival distribution. We develop general Bayesian nonparametric inference for MRL functions built from a Dirichlet process mixture model for the associated survival distribution. The resulting model for the MRL function admits a representation as a mixture of the kernel MRL functions with time-dependent mixture weights. This model structure allows for a wide range of shapes for the MRL function. Particular emphasis is placed on the selection of the mixture kernel, taken to be a gamma distribution, to obtain desirable properties for the MRL function arising from the mixture model. The inference method is illustrated with a data set of two experimental groups and a data set involving right censoring. The supplementary material available at Biostatistics online provides further results on empirical performance of the model, using simulated data examples. © The Author 2018. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Joint pathology and behavioral performance in autoimmune MRL-lpr Mice.

Science.gov (United States)

Sakić, B; Szechtman, H; Stead, R H; Denburg, J A

1996-09-01

Young autoimmune MRL-lpr mice perform more poorly than age-matched controls in tests of exploration, spatial learning, and emotional reactivity. Impaired behavioral performance coincides temporally with hyperproduction of autoantibodies, infiltration of lymphoid cells into the brain, and mild arthritic-like changes in hind paws. Although CNS mechanisms have been suggested to mediate behavioral deficits, it was not clear whether mild joint pathology significantly affected behavioral performance. Previously we observed that 11-week-old MRL-lpr mice showed a trend for disturbed performance when crossing a narrow beam. The first aim of the present study was to test the significance of this trend by increasing the sample size and, second, to examine the possibility that arthritis-like changes interfere with performance in brief locomotor tasks. For the purpose of the second goal, 18-week-old mice that differ widely in severity of joint disease were selectively taken from the population and tested in beam walking and swimming tasks. It was expected that the severity of joint inflammation would be positively correlated with the degree of locomotor impairment. The larger sample size revealed that young MRL-lpr mice perform significantly more poorly than controls on the beam-walking test, as evidenced by more foot slips and longer traversing time. However, significant correlation between joint pathology scores and measures of locomotion could not be detected. The lack of such relationship suggests that mild joint pathology does not significantly contribute to impaired performance in young, autoimmune MRL-lpr mice tested in short behavioral tasks.

Monitoring of Benomyl Residue in Mushroom Marketed in Hamadan City

Directory of Open Access Journals (Sweden)

S. Abdi

2015-07-01

Full Text Available Introduction & Objective: Pesticide residues in environment and food have a negative impact on the health of living organisms. Therefore, this study was carried out for evaluation of benomyl residues in mushroom marketed in Hamadan city in 2014 using spectrophotometry. Materials & Methods: 10 specimens of mushroom were collected from greenhouses and market basket of Hamadan city. After preparation and processing the samples in the laboratory, be-nomyl residues in samples were determined using a spectrophotometric method in 3 replica-tions. All statistical analyses were performed using the SPSS statistical package. Results: The mean concentration of benomyl residues in samples were 5.90±0.75, 2.10± 0.487, 40.04±1.346, 0.32±0.044, 14.0±0.785, 1.54±0.304, 40.0±0.45, 0.87±0.055, 0.66± 0.032 and 49.60±0.303 µg kg-1 and more than the maximum residue limit (MRL provided by the World Health Organization (10 ppb. The results of the comparison of the mean concentration of pesticide residues among samples revealed significant differences in most of the samples (P<0.05. Conclusion: The results showed that mean concentrations of benomyl residues in mushroom samples were exceeding that of the MRL. Therefore, it is essential to impart proper education to the farming community about hazards involved in the overuse of toxic pesticides. Also, codification of laws and their enforcement and implementation of programs for the regular periodic monitoring of pesticide residues in foodstuffs especially in vegetables cultivated un-der greenhouse conditions at the national level to protect consumers’ health are recom-mended.(Sci J Hamadan Univ Med Sci 2015; 22 (2: 137-143

Quantitative trait locus analysis of ovarian cysts derived from rete ovarii in MRL/MpJ mice

OpenAIRE

Lee, Shin-hyo; Ichii, Osamu; Otsuka, Saori; Hashimoto, Yoshiharu; Kon, Yasuhiro

2010-01-01

MRL/MpJ (MRL) is a model mouse for autoimmune diseases that shows dermatitis, vasculitis, arthritis, and glomerulonephritis. In addition to these immune-associated disorders, we found that aged MRL mice develop ovarian cysts originating from the rete ovarii, which is lined by ciliated or nonciliated epithelium and considered remnants of mesonephric tubules. Ovarian cysts, which are reported to have several sources, are associated with female infertility, but information regarding the genetic ...

Determination of anthelmintic drug residues in milk using ultra high performance liquid chromatography-tandem mass spectrometry with rapid polarity switching.

Science.gov (United States)

Whelan, Michelle; Kinsella, Brian; Furey, Ambrose; Moloney, Mary; Cantwell, Helen; Lehotay, Steven J; Danaher, Martin

2010-07-02

A new UHPLC-MS/MS (ultra high performance liquid chromatography coupled to tandem mass spectrometry) method was developed and validated to detect 38 anthelmintic drug residues, consisting of benzimidazoles, avermectins and flukicides. A modified QuEChERS-type extraction method was developed with an added concentration step to detect most of the analytes at keeper to ensure analytes remain in solution. Using rapid polarity switching in electrospray ionisation, a single injection was capable of detecting both positively and negatively charged ions in a 13 min run time. The method was validated at two levels: the unapproved use level and at the maximum residue level (MRL) according to Commission Decision (CD) 2002/657/EC criteria. The decision limit (CCalpha) of the method was in the range of 0.14-1.9 and 11-123 microg kg(-1) for drugs validated at unapproved and MRL levels, respectively. The performance of the method was successfully verified for benzimidazoles and levamisole by participating in a proficiency study.

Chronic exposure to trichloroethene causes early onset of SLE-like disease in female MRL +/+ mice

International Nuclear Information System (INIS)

Cai Ping; Koenig, Rolf; Boor, Paul J.; Kondraganti, Shakuntala; Kaphalia, Bhupendra S.; Khan, M. Firoze; Ansari, G.A.S.

2008-01-01

Trichloroethene (TCE) exacerbates the development of autoimmune responses in autoimmune-prone MRL +/+ mice. Although TCE-mediated autoimmune responses are associated with an increase in serum immunoglobulins and autoantibodies, the underlying mechanism of autoimmunity is not known. To determine the progression of TCE-mediated immunotoxicity, female MRL +/+ mice were chronically exposed to TCE through the drinking water (0.5 mg/ml of TCE) for various periods of time. Serum concentrations of antinuclear antibodies increased after 36 and 48 weeks of TCE exposure. Histopathological analyses showed lymphocyte infiltration in the livers of MRL +/+ mice exposed to TCE for 36 or 48 weeks. Lymphocyte infiltration was also apparent in the pancreas, lungs, and kidneys of mice exposed to TCE for 48 weeks. Immunoglobulin deposits in kidney glomeruli were found after 48 weeks of exposure to TCE. Our results suggest that chronic exposure to TCE promotes inflammation in the liver, pancreas, lungs, and kidneys, which may lead to SLE-like disease in MRL +/+ mice

Sunlight Triggers Cutaneous Lupus through a Colony Stimulating Factor-1 (CSF-1) Dependent Mechanism in MRL-Faslpr mice

Science.gov (United States)

Menke, Julia; Hsu, Mei-Yu; Byrne, Katelyn T.; Lucas, Julie A.; Rabacal, Whitney A.; Croker, Byron P.; Zong, Xiao-Hua; Stanley, E. Richard; Kelley, Vicki R.

2008-01-01

Sunlight (UVB) triggers cutaneous (CLE) and systemic lupus through an unknown mechanism. We tested the hypothesis that UVB triggers CLE through a CSF-1-dependent, macrophage (Mø) -mediated mechanism in MRL-Faslpr mice. By constructing mutant MRL-Faslpr strains expressing varying levels of CSF-1 (high, intermediate, none), and use of an ex-vivo gene transfer to deliver CSF-1 intra-dermally, we determined that CSF-1 induces CLE in lupus-susceptible, MRL-Faslpr mice, but not in lupus-resistant, BALB/c mice. Notably, UVB incites an increase in Mø, apoptosis in the skin and CLE in MRL-Faslpr, but not in CSF-1-deficient MRL-Faslpr mice. Furthermore, UVB did not induce CLE in BALB/c mice. Probing further, UVB stimulates CSF-1 expression by keratinocytes leading to recruitment and activation of Mø that, in turn, release mediators, which induce apoptosis in keratinocytes. Thus, sunlight triggers a CSF-1-dependent, Mø-mediated destructive inflammation in the skin leading to CLE in lupus-susceptible MRL-Faslpr, but not lupus-resistant BALB/c mice. Taken together, we envision CSF-1 as the “match” and lupus-susceptibility as the “tinder” leading to CLE. PMID:18981160

Survey of pesticide residues in table grapes: Determination of processing factors, intake and risk assessment

DEFF Research Database (Denmark)

Poulsen, Mette Erecius; Hansen, H.K.; Sloth, Jens Jørgen

2007-01-01

of the European Union maximum residue limit (MRL) were found in five samples from Italy. A number of samples were rinsed to study the possible reduction of residues. For copper, iprodione, procymidone and dithiocarbamates a significant effect of rinsing was found (20-49% reduction of residues). However......(-1) for pesticides and 21 mu g day(-1) for copper. Correspondingly, the intakes from South African grapes were 2.6 and 5.7 mu g day(-1) respectively. When the total exposure of pesticides from grapes were related to acceptable daily intake, expressed as the sum of Hazard Quotients, the exposure were...... approximately 0.5% for Italian samples and 1% for South African samples....

Dissipation kinetics, safety evaluation, and assessment of pre-harvest interval (PHI) and processing factor for kresoxim methyl residues in grape.

Science.gov (United States)

Sabale, Rupali; Shabeer, T P Ahammed; Utture, Sagar C; Banerjee, Kaushik; Jadhav, Manjusha R; Oulkar, Dasharath P; Adsule, Pandurang G; Deshmukh, Madhukar B

2014-04-01

A field dissipation study was conducted to evaluate the pre-harvest interval (PHI) and processing factor (PF) for kresoxim methyl (Ergon 44.3 SC) residues in grapes and during raisin making process at recommended dose (RD) and double the recommended dose (DRD). Kresoxim methyl residues dissipated following 1st-order kinetics with a half-life of 10 and 18 days at RD and DRD, respectively. The PHIs with respect to the European Union maximum residue limit (EU-MRL) of 1 mg kg(-1) for grapes were 13 and 30 days at RD and DRD, respectively. The degradation data during grape to raisin making process were best fitted to nonlinear 1st + 1st-order kinetics with a half-life ranging between 4 and 8 days for both shade drying and with raisin dryer at different doses. The PFs were 1.19 and 1.24 with shade drying and 1.09 and 1.10 with raisin dryer, respectively, which indicates concentration of the residues during raisin making process. The dietary exposure of kresoxim methyl on each sampling day was less than the respective maximum permissible intake both at RD and DRD. The residues of kresoxim methyl in market samples of grapes and raisins were well below the EU-MRL and were also devoid of any risk of acute toxicity related to dietary exposure.

Effect of extended exposure to low-dose radiation on autoimmune diseases of immunologically suppressed MRL/MpTn-gld/gld mice

International Nuclear Information System (INIS)

Ootsuyama, Akira; Okazaki, Ryuji; Norimura, Toshiyuki

2003-01-01

The purpose of this paper is to analyze the relationship between alterations of splenic T-cell subpopulations and the amelioration of autoimmune diseases of MRL/MpTn-gld/gld mice (MRL/gld mice) after extended exposure to low-dose radiation. After the onset of disease, 4-month-old MRL/gld mice were exposed to doses of 0.05, 0.2, and 0.5 Gy/day for 4 weeks (5 days/week), for total doses of 1, 4, and 10 Gy, respectively. The MRL/gld mice that were irradiated with 0.2 and 0.5 Gy/day showed an obvious decrease in the proportion of splenic CD4 - CD8 - T cells and remission of their autoimmune diseases. After the last irradiation, apoptotic cells were found in the white pulp of the spleen of the MRL/gld mice irradiated with 0.2 Gy/day, but not in the MRL/MpJ-+/+ mice (MRL/wild mice), which experienced a similar treatment. Before the onset of disease, 3-month-old MRL/gld mice subjected to 0.2 Gy/day showed a decrease in the proportion of splenic CD4 - CD8 - T cells and less remission of their autoimmune diseases than the 4-month-old mice. These results suggest that the accumulated CD4 - CD8 - T cells are more sensitive to radiation than other T cell subpopulations, and that decreasing CD4 - CD8 - T cells with extended exposure to low-dose radiation leads to the amelioration of autoimmune disease. (author)

Preservation properties for the discrete mean residual life ordering

Directory of Open Access Journals (Sweden)

Abdulhakim Al-Babtain

2015-04-01

Full Text Available The purpose of this paper is to prove several preservation properties of stochastic comparisons based on the discrete mean residual life ordering d-MRL under the reliability operations of convolutions, mixtures. Fi…nally we introduce a discrete renewal process application

Validation of a Five Plate Test, the STAR protocol, for the screening of antibiotic residues in muscle from different animal species according to European Decision 2002/657/EC.

Science.gov (United States)

Gaudin, V; Hedou, C; Rault, A; Verdon, E

2010-07-01

The STAR protocol is a Five Plate Test (FPT) developed several years ago at the Community Reference Laboratory (CRL) for the screening of antimicrobial residues in milk and muscle. This paper presents the validation of this method according to European Decision 2002/657/EC and to an internal guideline for validation. A validation protocol based on 'simulated tissues' and on a list of 16 representative antimicrobials to be validated was implemented in our laboratory during several months for the STAR protocol. The performance characteristics of the method were determined (specificity, detection capabilities CCbeta, applicability, ruggedness). In conclusion, the STAR protocol is applicable to the broad-spectrum detection of antibiotic residues in muscles of different animal species (pig, cattle, sheep, poultry). The method has good specificity (false-positive rate = 4%). The detection capabilities were determined for 16 antibiotics from different families in relation to their respective maximum residue limit (MRL): beta-lactams (penicillins and cephalosporins 8 MRL) and florfenicol (MRL). The two objectives of this study were met: firstly, to validate the STAR protocol according to European Decision 2002/657/EC, then to demonstrate that the validation guideline developed to implement this decision is applicable to microbiological plate tests even for muscle. The use of simulated tissue appeared a good compromise between spiked discs with antibiotic solutions and incurred tissues. In addition, the choice of a list of representative antibiotics allowed the reduction of the scope of the validation, which was already costly in time and effort.

Strategies for the screening of antibiotic residues in eggs: comparison of the validation of the classical microbiological method with an immunobiosensor method.

Science.gov (United States)

Gaudin, Valérie; Rault, Annie; Hedou, Celine; Soumet, Christophe; Verdon, Eric

2017-09-01

Efficient screening methods are needed to control antibiotic residues in eggs. A microbiological kit (Explorer® 2.0 test (Zeu Inmunotech, Spain)) and an immunobiosensor kit (Microarray II (AM® II) on Evidence Investigator™ system (Randox, UK)) have been evaluated and validated for screening of antibiotic residues in eggs, according to the European decision EC/2002/657 and to the European guideline for the validation of screening methods. The e-reader™ system, a new automatic incubator/reading system, was coupled to the Explorer 2.0 test. The AM II kit can detect residues of six different families of antibiotics in different matrices including eggs. For both tests, a different liquid/liquid extraction of eggs had to be developed. Specificities of the Explorer 2.0 and AM II kit were equal to 8% and 0% respectively. The detection capabilities were determined for 19 antibiotics, with representatives from different families, for Explorer 2.0 and 12 antibiotics for the AM II kit. For the nine antibiotics having a maximum residue limit (MRL) in eggs, the detection capabilities CCβ of Explorer 2.0 were below the MRL for four antibiotics, equal to the MRL for two antibiotics and between 1 and 1.5 MRLs for the three remaining antibiotics (tetracyclines). For the antibiotics from other families, the detection capabilities were low for beta-lactams and sulfonamides and satisfactory for dihydrostreptomycin (DHS) and fluoroquinolones, which are usually difficult to detect with microbiological tests. The CCβ values of the AM II kit were much lower than the respective MRLs for three detected antibiotics (tetracycline, oxytetracycline, tylosin). Concerning the nine other antibiotics, the detection capabilities determined were low. The highest CCβ was obtained for streptomycin (100 µg kg -1 ).

Pesticide residues in cauliflower, eggplant, endive, lettuce, pepper, potato and wheat of the slovene origin found in 2009.

Science.gov (United States)

Baša-Česnik, Helena; Velikonja-Bolta, Spela; Gregorčič, Ana

2010-12-01

In the year 2009, 170 cauliflower, eggplant, endive, lettuce, pepper, potato and wheat samples from Slovene producers were analysed for pesticide residues. The samples were analysed for the presence of 214 different active compounds using three analytical methods. MRL exceedances have not been observed, which is better than the results obtained from the monitoring of pesticide residues in the products of plant origin in the European Union, Norway, Iceland and Liechtenstein for the years 2004 to 2006. We have observed that MRL exceedances in Slovenia have been reduced in recent times. We assume that the farmers have learned how to use PPP safely in accordance with good agricultural practice.

Health Risk Assessment of Pesticide Residues via Dietary Intake of Market Vegetables from Dhaka, Bangladesh

Directory of Open Access Journals (Sweden)

Md. Shakhaoat Hossain

2013-02-01

Full Text Available The present study was designed to assess the health risk of pesticide residues via dietary intake of vegetables collected from four top agro-based markets of Dhaka, Bangladesh. High performance liquid chromatography with a photo diode array detector (HPLC-PDA was used to determine six organophosphorus (chlorpyrifos, fenitrothion, parathion, ethion, acephate, fenthion, two carbamate (carbaryl and carbofuran and one pyrethroid (cypermethrin pesticide residues in twelve samples of three common vegetables (tomato, lady’s finger and brinjal. Pesticide residues ranged from below detectable limit (<0.01 to 0.36 mg/kg. Acephate, chlorpyrifos, ethion, carbaryl and cypermethrin were detected in only one sample, while co-occurrence occurred twice for fenitrothion and parathion. Apart from chlorpyrifos in tomato and cypermethrin in brinjal, all pesticide residues exceeded the maximum residue limit (MRL. Hazard risk index (HRI for ethion (10.12 and carbaryl (1.09 was found in lady’s finger and tomato, respectively. Rest of the pesticide residues were classified as not a health risk. A continuous monitoring and strict regulation should be enforced regarding control of pesticide residues in vegetables and other food commodities.

Development of an enzyme immunoassay for the antibiotic cefquinome and its application for residue determination in cow's milk after therapeutical mastitis treatment.

Science.gov (United States)

Thal, Johannes; Steffen, Monika; Meier, Bianca; Schneider, Elisabeth; Adriany, Ansgar; Usleber, Ewald

2011-01-01

The aim of this study was to develop and evaluate an enzyme immunoassay (EIA) for the cephalosporin antibiotic in milk, in combination with a new microbiological test system (brilliant black reduction test, BRT-P). Polyclonal antibodies against cefquinome were produced in rabbits, using cefquinome-keyhole limpet hemocyanine as the immunogen. These antibodies and a cefquinome-glucose oxidase conjugate were used in a competitive indirect EIA. The detection limit for cefquinome in milk was 1.5 ng ml(-1), recoveries were 80-128% at 4-40 ng ml(-1). Cross-reactivities with other cephalosporins/penicillins were all <1%. The EIA was used to determine cefquinome in incurred raw milk, the BRT-P (detection limit ≈ 20 ng ml(-1)) and a receptor assay (ßeta-s.t.a.r., detection limit ≈ 15 ng ml(-1)) were used in parallel. Five lactating cows, suffering from clinical mastitis, were treated with cefquinome by simultaneous intramammary and intramuscular injection. Cefquinome residues (maximum 10-27 μg ml(-1)) were most exclusively found in the udder quarter which was treated intramammary, residue levels in the other three quarters were low (<20 ng ml(-1)). Even in milk from intramammary-dosed quarters, residue levels fell below European Union maximum residue level (MRL, 20 μg kg(-1)) 2 days before the end of the withdrawal period. EIA, BRT-P, and ßeta-s.t.a.r. results showed acceptable agreement for milk samples, but the newly developed EIA is superior in aspects of sensitivity. In conclusion, this is the first one description of immunoassay and microbiological tests capable to determine cefquinome in milk at the MRL in incurred sample material.

Autoreactive T cells in MRL/Mpr-lpr/lpr mice. Characterization of the lymphokines produced and analysis of antigen-presenting cells required

International Nuclear Information System (INIS)

Weston, K.M.; Ju, S.T.; Lu, C.Y.; Sy, M.S.

1988-01-01

Lymph node cells from 4-wk-old MRL/Mp-lpr/lpr mice, but not from MRL/Mp-+/+ mice, when cultured in vitro for 5 to 7 days, will spontaneously proliferate and produce IL-2. We examined the expression of several cell surface Ag on lymph node cells from MRL/Mp-lpr/lpr mice before and after in vitro culture. There is an increase in the expression of Thy-1, L3T4, IL-2R, T cell activating protein, T cell receptor, and T3 complex on the surface of cultured cells. Cultured cells produced IL-3, IFN-gamma, and small but detectable amounts of IL-1 in addition to IL-2. Gamma irradiation of APC from young MRL/Mp-lpr/lpr mice or treatment of APC with a mAb (J11D) and C, completely abrogated their stimulatory capacity. These experiments suggest that B cells are the predominant APC responsible in the activation of autoreactive T cells in MRL/Mp-lpr/lpr mice. Lymph node cells from C57BL/6-lpr/lpr or C3H-lpr/lpr mice were unable to spontaneously proliferate or produce IL-2. Lymph node cells from (MRL/Mp-lpr/lpr x C57BL/6-lpr/lpr) F1 mice or (C3H-lpr/lpr x MRL/Mp-lpr/lpr) F1 mice did proliferate and produced IL-2 after in vitro culture. Using T cells from these F1 animals and APC from each parental haplotype, we found that APC from MRL/Mp-lpr/lpr mice induced more proliferation and greater amounts of IL-2, when compared to APC from F1 animals. APC from C57BL6-lpr/lpr mice or C3H-lpr/lpr were unable to induce spontaneous proliferation and IL-2 production. Therefore, B cells from MRL/Mp-lpr/lpr mice appear to possess unique features that enable them to activate autoreactive T cells more effectively than B cells from other mice bearing the lpr/lpr gene

Empirical likelihood based detection procedure for change point in mean residual life functions under random censorship.

Science.gov (United States)

Chen, Ying-Ju; Ning, Wei; Gupta, Arjun K

2016-05-01

The mean residual life (MRL) function is one of the basic parameters of interest in survival analysis that describes the expected remaining time of an individual after a certain age. The study of changes in the MRL function is practical and interesting because it may help us to identify some factors such as age and gender that may influence the remaining lifetimes of patients after receiving a certain surgery. In this paper, we propose a detection procedure based on the empirical likelihood for the changes in MRL functions with right censored data. Two real examples are also given: Veterans' administration lung cancer study and Stanford heart transplant to illustrate the detecting procedure. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Organophosphate Pesticide Residues in Okra and Brinjal Grown in Peri-Urban Environment of Big Cities of Punjab

International Nuclear Information System (INIS)

Randhawa, M.A.; Zaman, M.; Anjum, F.M.; Asghar, A.

2015-01-01

Peri urban farming system is main supplier of vegetables to urban population and organophosphate pesticides exposure due to consumption of okra and brinjal to urban population has been estimated in this study. Okra and brinjal samples (90 samples for each vegetable) were collected from peri-urban farming area of Faisalabad, Multan and Gujranwala and were analysed by GC-ECD for quantification of chlorpyrifos, profenophos and triazophos residues. Data were statistically analyzed to calculate, mean and standard deviation. Quantification of pesticides residues revealed that 85 (47.22 percentage) samples were contaminated and 15 (8.33 percentage of total samples and 17.64 percentage of contaminated) samples showed residues value higher than MRL'S. Out of 85 contaminated samples 27 (31.76 percentage) samples were contaminated with chlorpyrifos, 30 (35.29 percentage) samples with profenofos and 29 (34.11) were contaminated with triazophos. The mean concentration of chlorpyrifos in okra was 0.192 mg Kg-1 and brinjal 0.197 mg Kg-1. The mean concentration for profenofos in okra was 0.02 mg Kg-1 and brinjal 0.035 mg Kg-1. Similarly mean concentration for triazophos in okra was 0.009 mg Kg-1 and brinjal 0.01 mg Kg-1. Overall, 6.67 percentage samples of okra and 6.66 percentage samples of brinjal contaminated with chlorpyrifos exceeded EU MRL of 0.05 mg kg-1. Okra samples were found contaminated at frequency of 4.44 percentage and brinjal samples at frequency of 5.56 percentage with higher profenofos residues level than MRL of 0.05 mg kg-1. Approximately, 6.67 percentage samples of okra and 5.6 percentage samples of brinjal had profenofos residue level above MRL of 0.01 mg kg-1. This study may be helpful for building database regarding regional exposure of urban population and facilitate in estimation of possible risk to their health in our daily life. (author)

Effects of prolonged treatment with memantine in the MRL model of CNS lupus.

Science.gov (United States)

Marcinko, Katarina; Parsons, Tiffany; Lerch, Jason P; Sled, John G; Sakic, Boris

2012-09-01

Neuropsychiatric manifestations and brain atrophy of unknown etiology are common and severe complications of systemic lupus erythematosus (SLE). An autoantibody that binds to N-methyl-D-aspartate (NMDA) receptor NR2 has been proposed as a key factor in the etiology of central nervous system (CNS) SLE. This hypothesis was supported by evidence suggesting memantine (MEM), an uncompetitive NMDA receptor antagonist, prevents behavioral dysfunction and brain pathology in healthy mice immunized with a peptide similar to an epitope on the NR2 receptor. Given that SLE is a chronic condition, we presently examine the effects of MEM in MRL/lpr mice, which develop behavioral deficits alongside SLE-like disease. A broad behavioral battery and 7-Tesla MRI were used to examine whether prolonged treatment with MEM (~25 mg/kg b.w. in drinking water) prevents CNS involvement in this spontaneous model of SLE. Although MEM increased novel object exploration in MRL/lpr mice, it did not show other beneficial, substrain-specific effects. Conversely, MEM was detrimental to spontaneous activity in control MRL +/+ mice and had a negative effect on body mass gain. Similarly, MRI revealed comparable increases in the volume of periventricular structures in MEM-treated groups. Sustained exposure to MEM affects body growth, brain morphology, and behavior primarily by pharmacological, and not autoimmunity-dependant mechanisms. Substrain-specific improvement in exploratory behavior of MEM-treated MRL/lpr mice may indicate that the NMDA system is merely a constituent of a complex pathogenenic cascade. However, it was evident that chronic administration of MEM is unable to completely prevent the development of a CNS SLE-like syndrome.

Effect of extended exposure of low-dose radiation on autoimmune diseases of immunologically depressed MRL/MpJ-gld/gld mice

International Nuclear Information System (INIS)

Ootsuyama, A.; Okazaki, R.; Norimura, T.

2000-01-01

We analyzed alterations of splenic T cell subpopulations and amelioration of autoimmune disease of MRL/MpJ-gld/gld mice (MRL/gld mice) after the extended exposure to low-dose radiation (LDR). Four-month old MRL/gld mice were exposed to 0.05, 0.2 and 0.5 Gy/day for 4 weeks (5 days/week) with a total dose of 1, 4 and 10 Gy, respectively. The mice irradiated with 0.2 and 0.5 Gy/day showed an obvious decrease in the proportions of splenic CD4 - CD8 - T cells and remission of their autoimmune disease. In the mice irradiated with 0.2 Gy/day, apoptotic cells were found in the white pulp of the spleen after the last irradiation, but not in that of the treated MRL/MpJ-+/+ mice (MRL/wild type mice). It seems that the accumulated CD4 - CD8 - T cells are more sensitive to radiation than other T cell subpopulations and prone to apoptosis, and efficient elimination of abnormal CD4 - CD8 - T cells by radiation-induced apoptosis may lead to the amelioration of autoimmune disease. (author)

Food safety in Thailand 2: Pesticide residues found in Chinese kale (Brassica oleracea), a commonly consumed vegetable in Asian countries

International Nuclear Information System (INIS)

Wanwimolruk, Sompon; Kanchanamayoon, Onnicha; Phopin, Kamonrat; Prachayasittikul, Virapong

2015-01-01

There is increasing public concern over human health risks associated with extensive use of pesticides in agriculture. Regulation of pesticide maximum residue limits (MRLs) in food commodities is established in many developed countries. For Thailand, this regulation exists in law but is not fully enforced. Therefore, pesticide residues in vegetables and fruits have not been well monitored. This study investigated the pesticide residues in Chinese kale, a commonly eaten vegetable among Asians. The Chinese kale samples (N = 117) were purchased from markets in Nakhon Pathom Province, Thailand, and analyzed for the content of 28 pesticides. Analysis was performed by the multiresidual extraction followed by GC–MS/MS. Of pesticides investigated, 12 pesticides were detected in 85% of the Chinese kale samples. Although carbaryl, deltamethrin, diazinon, fenvalerate and malathion were found in some samples, their levels were lower than their MRLs. However, in 34 samples tested, either carbofuran, chlorpyrifos, chlorothalonil, cypermethrin, dimethoate, metalaxyl or profenofos was detected exceeding their MRLs. This represents a 29% rate of pesticide detection above the MRL; a rate much higher than in developed countries. Washing vegetables under running water significantly reduced (p < 0.05) profenofos residues by 55%. The running water method did not significantly decrease cypermethrin residues in the samples but washing with vinegar did. Our research suggests that routine monitoring of pesticide residues is necessary to reduce the public health risks associated with eating contaminated vegetables. Washing vegetables before consumption is advisable as this helps to reduce the level of pesticide residues in our daily intake. - Highlights: • Significant pesticide residues were detected in Chinese kale sold in Thailand. • MRL exceedance was found and this was higher than that seen in developed countries. • Washing vegetables under running water can remove pesticide

Food safety in Thailand 2: Pesticide residues found in Chinese kale (Brassica oleracea), a commonly consumed vegetable in Asian countries

Energy Technology Data Exchange (ETDEWEB)

Wanwimolruk, Sompon, E-mail: sompon-999@hotmail.com [Center for Innovation Development and Technology Transfer, Faculty of Medical Technology, Mahidol University, Bangkok 10700 (Thailand); Kanchanamayoon, Onnicha [Center for Innovation Development and Technology Transfer, Faculty of Medical Technology, Mahidol University, Bangkok 10700 (Thailand); Phopin, Kamonrat [Center for Innovation Development and Technology Transfer, Faculty of Medical Technology, Mahidol University, Bangkok 10700 (Thailand); Department of Clinical Microbiology and Applied Technology, Faculty of Medical Technology, Mahidol University, Bangkok 10700 (Thailand); Prachayasittikul, Virapong [Department of Clinical Microbiology and Applied Technology, Faculty of Medical Technology, Mahidol University, Bangkok 10700 (Thailand)

2015-11-01

There is increasing public concern over human health risks associated with extensive use of pesticides in agriculture. Regulation of pesticide maximum residue limits (MRLs) in food commodities is established in many developed countries. For Thailand, this regulation exists in law but is not fully enforced. Therefore, pesticide residues in vegetables and fruits have not been well monitored. This study investigated the pesticide residues in Chinese kale, a commonly eaten vegetable among Asians. The Chinese kale samples (N = 117) were purchased from markets in Nakhon Pathom Province, Thailand, and analyzed for the content of 28 pesticides. Analysis was performed by the multiresidual extraction followed by GC–MS/MS. Of pesticides investigated, 12 pesticides were detected in 85% of the Chinese kale samples. Although carbaryl, deltamethrin, diazinon, fenvalerate and malathion were found in some samples, their levels were lower than their MRLs. However, in 34 samples tested, either carbofuran, chlorpyrifos, chlorothalonil, cypermethrin, dimethoate, metalaxyl or profenofos was detected exceeding their MRLs. This represents a 29% rate of pesticide detection above the MRL; a rate much higher than in developed countries. Washing vegetables under running water significantly reduced (p < 0.05) profenofos residues by 55%. The running water method did not significantly decrease cypermethrin residues in the samples but washing with vinegar did. Our research suggests that routine monitoring of pesticide residues is necessary to reduce the public health risks associated with eating contaminated vegetables. Washing vegetables before consumption is advisable as this helps to reduce the level of pesticide residues in our daily intake. - Highlights: • Significant pesticide residues were detected in Chinese kale sold in Thailand. • MRL exceedance was found and this was higher than that seen in developed countries. • Washing vegetables under running water can remove pesticide

Residues and dissipation of kresoxim methyl in apple under field condition.

Science.gov (United States)

Malhat, Farag; Kamel, Essam; Saber, Ayman; Hassan, Ehab; Youssef, Ahmed; Almaz, Monir; Hassan, Ayman; Fayz, Abd El-Salam

2013-09-01

The dissipation and residual levels of kresoxim methyl in apple under field condition were determined by using HPLC-DAD with QuEChERS method. At fortification levels of 0.05, 0.1, 0.5 and 1.0 mg kg(-1) in apple, it was shown that recoveries were ranged from 91.1% to 96.9% with coefficient variation of the method (CV%) for repeatability ranged from 1.27% to 4.77%. The limit of quantification (LOQ) of the method was 0.05 mg kg(-1). The dissipation rates of kresoxim methyl were described by using first-order kinetics and its half-life, as they are ranged from 4.58 to 4.77 days in apple. The terminal residues of kresoxim methyl were below the FAO/WHO maximum residue limit (MRL, 0.2 mg kg(-1)) in apple when measured 14 days after the final application, which suggested that the use of this fungicide was safe for humans. This study would help in providing the basic information for developing regulation to guard a safe use of kresoxim methyl in apple orchard and to prevent health problem from consumers. Copyright © 2013 Elsevier Ltd. All rights reserved.

Determination of tylosin residues in different animal tissues by high performance liquid chromatography.

Science.gov (United States)

Prats, C; Francesch, R; Arboix, M; Pérez, B

2002-01-05

A HPLC method to determine and quantify tylosin residues from calves, pigs and poultry is reported. This procedure permitted tylosin to be separated from muscle, liver, kidney and fat after a simple extraction with chloroform or ethyl acetate under basic conditions. The analytical methodology showed a high specificity and sensitivity and an adequate precision and accuracy with a limit of quantification of 50 microg/kg. Eight calves were administered 20 mg/kg/day of tylosin for 5 days and slaughtered at 7 and 14 days post-administration. Results showed that at the 14th day tylosin levels were lower than the MRL in all target tissues.

FK506: therapeutic effects on lupus dermatoses in autoimmune-prone MRL/Mp-lpr/lpr mice.

Science.gov (United States)

Furukawa, F; Imamura, S; Takigawa, M

1995-01-01

The effects of FK506, a new immunosuppressive agent, on the development of lupus dermatoses were investigated in the autoimmune-prone MRL/Mp-lpr/lpr (MRL/lpr) mouse, which is an animal model for the spontaneous development of skin lesions similar to those of human lupus erythematosus (LE). FK506 reduced the incidence of skin lesions, lupus nephritis, the titre of serum anti-double-stranded DNA antibodies and the massive T cell proliferation. The incidence and magnitude of IgG deposition at the dermoepidermal junction were not changed. These results suggest that FK506 is a promising immunosuppressive agent for the control of autoimmune skin diseases.

Evaluation of Some Pesticide Residues in Fruits import by High Performance Liquid Chromatography

Directory of Open Access Journals (Sweden)

Lamees Munef Abdul-Latef

2017-02-01

Full Text Available Pesticide residues have been found in various fruits and vegetables.  This studycollected 24 samples and reported a method based on High Performance Liquid Chromatography (HPLC. For determination of pesticide residues used in Some fruits which were collected from different markets of Baghdad city to make 24 samples from (peel , core, mixture for each type of fruits markets as:  Oranges( Egypt , Africa, Pomegranate ( Egypt, Mango ( Kenya , Pears (China,  Plum fruits ( Africa , Kiwi (Turkey .That detective of ( 5 different  pesticides (diazinon,  malathion, chlorpyrifos ,parathion  and cypermethrin. The results were detected of multi-residues of  pesticides on the fruit in ( peel , core , mixture may be in the limit of Maximum residue limits(MRL or higher of it   . The pesticides detected that exceeding the limits are: cypermethrin  in Kiwi (peel, core and mixtureat(0.204,0.038, 0.537, in pomegranate detected in (peel and mixture at (0.509,0.189 mg/kg , Diazinondetccted in Egyptian orange in (peel ,core and mixture at (0.031,0.207, 0.099 mg/kg . Malathion and Parathion was not detected at any type of fruits and  that results was compared with codex of FAO/WHO(2013. That data is important to monitor residues in food and to fill gaps in current knowledge would be helpful in assessing human exposure risks from ingestion of contaminated Fruits Imported to our country .

[Therapeutic effect of total glucosides of paeony on lupus nephritis in MRL/lpr mice].

Science.gov (United States)

Ding, Zhao-Xia; Yang, Shao-Feng; Wu, Qi-Fu; Lu, Ying; Chen, Yu-Yao; Nie, Xiao-Li; Jie, Hong-Yu; Qi, Jing-Min; Wang, Fan-Sheng

2011-04-01

To observe the therapeutic effect of total glucosides of paeony (TGP) on lupus nephritis (LN) in MRL/lpr mice. MRL/lpr mice with lupus nephritis were randomized into model group and TGP group. The urinary protein content was detected using Coomassie brilliant blue, and the serum levels of IgG anti-double-stranded DNA (dsDNA) antibodies and antinuclear antibodies (ANA) were measured by enzyme-linked immunosorbent assay (ELISA). The changes in the renal pathology were examined microscopically, and the spleen and thymus were weighed to calculate the spleen and thymus indexes. At 15 and 30 days after TGP administration, the urinary protein content in the TGP group was significantly lower than that in the model group (PTGP treatment significantly lowered the serum levels of anti-dsDNA antibodies and ANA and the weight and index of spleen (PTGP treatment, the urinary protein content and the levels of anti-dsDNA antibodies and ANA decreased significantly at 15 and 30 days after TGP administration (PTGP administration, the urinary protein content was significantly lowered in the TGP group as compared to that at 15 days (PTGP can reduce urinary protein content and serum levels of anti-dsDNA antibodies and ANA, and lessen renal pathology in MRL/lpr mice with lupus nephritis, suggesting its therapeutic effect on lupus nephritis.

Screening of antibiotics and chemical analysis of penicillin residue in fresh milk and traditional dairy products in Oyo state, Nigeria

Directory of Open Access Journals (Sweden)

Isaac Olufemi Olatoye

2016-09-01

Full Text Available Background and Aim: There are global public health and economic concerns on chemical residues in food of animal origin. The use of antibiotics in dairy cattle for the treatment of diseases such as mastitis has contributed to the presence of residues in dairy products. Penicillin residues as low as 1 ppb can lead to allergic reactions and shift of resistance patterns in microbial population as well as interfere with the processing of several dairy products. Antibiotic monitoring is an essential quality control measure in safe milk production. This study was aimed at determining antibiotic residue contamination and the level of penicillin in dairy products from Fulani cattle herds in Oyo State. Materials and Methods: The presence of antibiotic residues in 328 samples of fresh milk, 180 local cheese (wara, and 90 fermented milk (nono from Southwest, Nigeria were determined using Premi® test kit (R-Biopharm AG, Germany followed by high-performance liquid chromatography analysis of penicillin-G residue. Results: Antibiotic residues were obtained in 40.8%, 24.4% and 62.3% fresh milk, wara and nono, respectively. Penicillin-G residue was also detected in 41.1% fresh milk, 40.2% nono and 24.4% wara at mean concentrations of 15.22±0.61, 8.24±0.50 and 7.6±0.60 μg/L with 39.3%, 36.7% and 21.1%, respectively, containing penicillin residue above recommended Codex maximum residue limit (MRL of 5 μg/L in dairy. There was no significant difference between the mean penicillin residues in all the dairy products in this study. Conclusion: The results are of food safety concern since the bulk of the samples and substantial quantities of dairy products in Oyo state contained violative levels of antibiotic residues including penicillin residues in concentrations above the MRL. This could be due to indiscriminate and unregulated administration of antibiotics to dairy cattle. Regulatory control of antibiotic use, rapid screening of milk and dairy farmers�

Dissipation and Residues of Dichlorprop-P and Bentazone in Wheat-Field Ecosystem

Directory of Open Access Journals (Sweden)

Xiaoxiao Feng

2016-05-01

Full Text Available Dichlorprop-P and bentazone have been widely used in the prevention and control of weeds in wheat field ecosystems. There is a concern that pesticide residues and metabolites remain on or in the wheat. Thus, the study of the determination and monitoring of their residues in wheat has important significance. A rapid, simple and reliable QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe method was modified, developed and validated for the determination of dichlorprop-P, bentazone and its metabolites (6-hydroxy-bentazone and 8-hydroxy-bentazone in wheat (wheat plants, wheat straw and grains of wheat using high-performance liquid chromatography coupled with tandem mass spectrometry (HPLC-MS/MS. The average recoveries of this method ranged from 72.9% to 108.7%, and the limits of quantification (LOQs were 2.5–12 μg/kg. The dissipation and final residue of four compounds in three provinces (Shandong, Jiangsu and Heilongjiang in China were studied. The trial results showed that the half-lives of dichlorprop-P and bentazone were 1.9–2.5 days and 0.5–2.4 days in wheat plants, respectively. The terminal residues in grains of wheat and wheat straw at harvest were all much below the maximum residue limit (MRL of 0.2 mg/kg for dichlorprop-P and 0.1 mg/kg for bentazone established by the European Union (EU, Regulation No. 396/2005.

Persistence of α-cypermethrin residues in milk of lactating donkeys (Equus asinus) using UHPLC-MS/MS.

Science.gov (United States)

Chirollo, Claudia; Radovnikovic, Anita; Veneziano, Vincenzo; Marrone, Raffaele; Pepe, Tiziana; Danaher, Martin; Anastasio, Aniello

2014-01-01

The aim of this study was to measure the persistence of residues of the pyrethroid insecticide α-cypermethrin (ACYP) in the milk of lactating donkeys following pour-on treatment. Milk was collected from animals (n = 7) before the treatment and at 12, 24, 36, 48, 60, 72 and 84 h post-treatment. The last sampling was taken 7 days post-treatment (168 h). Milk samples were analysed by ultra-high-performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS). The analytical method was validated following requirements of Commission Decision 2002/657/EC. All samples showed levels of ACYP below the maximum residue limit (MRL) of 20 μg kg(-1) established for bovine milk (Commission Regulation (EU) No. 37/2010). The results demonstrate that there is minimal partitioning of ACYP into milk in lactating donkeys from pour-on treatment.

The detection limits of antimicrobial agents in cow's milk by a simple Yoghurt Culture Test.

Science.gov (United States)

Mohsenzadeh, M; Bahrainipour, A

2008-09-15

The aim of this study was to study performance of Yoghurt Culture Test (YCT) in the detection of antimicrobial residues in milk. For this purpose, the sensitivity of YCT for 15 antibiotics were determined. For each drug, 8 concentrations were tested. The detection limits of YCT at 2.5 h and 4 h incubation were determined (microg kg(-1)): 15 and 37.5, penicillin G; 4 and 5, ampicillin; 5 and 7.5, amoxycillin; 100 and 200, cephalexin; 80 and 100, cefazoline; 100 and 200, oxytetracycline; 500 and 100, chlortetracycline; 100 and 200, tetracycline; 150 and 200, doxycycline; 200 and 400, sulphadimidine; 500 and 1000, gentamycin; 1000 and 1500, spectinomycin; 400 and 500, erythromycin; 50 and 100, tylosin; 5000 and 10000, chloramphenicol. The YCT detection limits at 2.5 h incubation for ampicillin, cephalexin, tetracycline, oxytetracycline and tylosin are similar to those obtained as Maximum Residue Limit (MRL) according to Regulation 2377/90 EEC as set out by the European Union. In addition the detection limits of YCT for some antibiotics were lower than some of microbial inhibitor test.

Assessment of organochlorine pesticides and atrazine residues in Maize Produced in Ghana using GC-ECD/ GC-MS

International Nuclear Information System (INIS)

Miensah, E.D.

2015-07-01

Maize is consumed by over 95% of the Ghanaian populace and the practice of using atrazine, lindane and other organochlorine pesticides in its production has raised concerns about potential adverse effects on human health and the environment. A field survey was conducted in this study to assess farmers’ knowledge of safe handling and use of these chemicals as well as toxicity awareness and symptoms among farmers and traders. Residues of the pesticides in maize samples as well as the potential health risk associated with exposure to them were also evaluated. Data obtained from the field survey indicate that a large proportion of farmers are at risk of pesticide poisoning through occupational exposure. Over 80 % of applicators do not apply safety precautions during pesticide mixing and application; resulting in considerable prevalence of pesticide related illnesses in the study area. Residues of lindane and atrazine were below detection limits of 0.005 mg/kg and 0.010 mg/kg respectively of the GC-ECD/MS used for the analysis; except in the Ashanti region where atrazine was 0.05 mg/kg which is within the EU-MRL of 0.1 mg/kg. However, minute concentrations of other organochlorines (endrin- 0.007 mg/kg; heptachlor- 0.023 mg/kg; alpha-endosulfan- 0.013 mg/kg) were found in maize samples from Brong Ahafo, Eastern, Central and Upper west regions. Though endrin and alpha-endosulfan were below the EU-MRL of 0.01 mg/kg and 0.10 mg/kg respectively, heptachlor was slightly above the EU-MRL of 0.01 mg/kg. The estimated doses for all these other organochlorines pesticides do not pose direct hazard to human health because their estimated dose values were lower than toxic thresholds and reference doses. However, due to the unsafe application practices by applicators, there exists a potential risk for systemic and carcinogenic health effects by these chemicals in the study area. (au)

Lupus eritematoso sistémico en ratones MRL lpr/lpm y knockouts del receptor de quimioquina CCR2

OpenAIRE

Camarasa Lillo, Natalia

2009-01-01

INTRODUCCIÓN El lupus eritematoso sistémico es una enfermedad autoinmune cuya principal manifestación y debut de la enfermedad es la glomerulonefritis mediada por complejos inmunes. Los ratones MRL/MpJ-Fas lpr/J (MRL/lpr) llevan una mutación en el gen Fas de la apoptosis que da lugar a una proliferación de linfocitos autoreactivos y son considerados un modelo de ratón que reproduce muy bien la enfermedad lúpica en el humano, con linfadenopatía asociada a proliferación aberrante de células T,...

Maize root lectins mediate the interaction with Herbaspirillum seropedicae via N-acetyl glucosamine residues of lipopolysaccharides.

Directory of Open Access Journals (Sweden)

Eduardo Balsanelli

Full Text Available Herbaspirillum seropedicae is a plant growth-promoting diazotrophic betaproteobacterium which associates with important crops, such as maize, wheat, rice and sugar-cane. We have previously reported that intact lipopolysaccharide (LPS is required for H. seropedicae attachment and endophytic colonization of maize roots. In this study, we present evidence that the LPS biosynthesis gene waaL (codes for the O-antigen ligase is induced during rhizosphere colonization by H. seropedicae. Furthermore a waaL mutant strain lacking the O-antigen portion of the LPS is severely impaired in colonization. Since N-acetyl glucosamine inhibits H. seropedicae attachment to maize roots, lectin-like proteins from maize roots (MRLs were isolated and mass spectrometry (MS analysis showed that MRL-1 and MRL-2 correspond to maize proteins with a jacalin-like lectin domain, while MRL-3 contains a B-chain lectin domain. These proteins showed agglutination activity against wild type H. seropedicae, but failed to agglutinate the waaL mutant strain. The agglutination reaction was severely diminished in the presence of N-acetyl glucosamine. Moreover addition of the MRL proteins as competitors in H. seropedicae attachment assays decreased 80-fold the adhesion of the wild type to maize roots. The results suggest that N-acetyl glucosamine residues of the LPS O-antigen bind to maize root lectins, an essential step for efficient bacterial attachment and colonization.

Maize root lectins mediate the interaction with Herbaspirillum seropedicae via N-acetyl glucosamine residues of lipopolysaccharides.

Science.gov (United States)

Balsanelli, Eduardo; Tuleski, Thalita Regina; de Baura, Valter Antonio; Yates, Marshall Geoffrey; Chubatsu, Leda Satie; Pedrosa, Fabio de Oliveira; de Souza, Emanuel Maltempi; Monteiro, Rose Adele

2013-01-01

Herbaspirillum seropedicae is a plant growth-promoting diazotrophic betaproteobacterium which associates with important crops, such as maize, wheat, rice and sugar-cane. We have previously reported that intact lipopolysaccharide (LPS) is required for H. seropedicae attachment and endophytic colonization of maize roots. In this study, we present evidence that the LPS biosynthesis gene waaL (codes for the O-antigen ligase) is induced during rhizosphere colonization by H. seropedicae. Furthermore a waaL mutant strain lacking the O-antigen portion of the LPS is severely impaired in colonization. Since N-acetyl glucosamine inhibits H. seropedicae attachment to maize roots, lectin-like proteins from maize roots (MRLs) were isolated and mass spectrometry (MS) analysis showed that MRL-1 and MRL-2 correspond to maize proteins with a jacalin-like lectin domain, while MRL-3 contains a B-chain lectin domain. These proteins showed agglutination activity against wild type H. seropedicae, but failed to agglutinate the waaL mutant strain. The agglutination reaction was severely diminished in the presence of N-acetyl glucosamine. Moreover addition of the MRL proteins as competitors in H. seropedicae attachment assays decreased 80-fold the adhesion of the wild type to maize roots. The results suggest that N-acetyl glucosamine residues of the LPS O-antigen bind to maize root lectins, an essential step for efficient bacterial attachment and colonization.

A benzenediamine derivate FC-99 attenuates lupus nephritis in MRL/lpr mice via inhibiting myeloid dendritic cell-secreted BAFF.

Science.gov (United States)

Ji, Jianjian; Xu, Jingjing; Li, Fanlin; Li, Xiaojing; Gong, Wei; Song, Yuxian; Dou, Huan; Hou, Yayi

2016-05-01

Myeloid dendritic cells (DCs) can produce B-cell-activating factor (BAFF) that modulates survival and differentiation of B cells and plays a pivotal role in the pathogenesis of systemic lupus erythematosus (SLE). Toll-like receptor 4 (TLR4) signaling has important functions in the process of BAFF production. Our previous study showed that a benzenediamine derivate FC-99 possesses anti-inflammation activity and directly interacts with interleukin-1 receptor-associated kinase 4 (IRAK4), which was a pivotal molecule in TLR4 signaling. In this study, we demonstrated that FC-99 attenuated lupus nephritis in the MRL/lpr mice. FC-99 also decreased the levels of total immunoglobulin G (IgG), total IgG2a and IgM in sera, as well as the activation of B cells in the spleens of MRL/lpr mice. Moreover, FC-99 inhibited abnormal activation of myeloid DCs in spleens and reduced the levels of BAFF in sera, spleens, and kidneys of MRL/lpr mice. Furthermore, upon TLR4 stimulation with lipopolysaccharide in vitro, FC-99 inhibited IRAK4 phosphorylation, as well as the activation and BAFF production in murine bone marrow-derived DCs. These data indicate that FC-99 attenuates lupus nephritis in MRL/lpr mice via inhibiting DC-secreted BAFF, suggesting that FC-99 may be a potential therapeutic candidate for the treatment of SLE. © The Author 2016. Published by ABBS Editorial Office in association with Oxford University Press on behalf of the Institute of Biochemistry and Cell Biology, Shanghai Institutes for Biological Sciences, Chinese Academy of Sciences.

Hydronephrosis with ureteritis developed in C57BL/6N mice carrying the congenic region derived from MRL/MpJ-type chromosome 11.

Science.gov (United States)

Ichii, Osamu; Chihara, Masataka; Lee, Shin-Hyo; Nakamura, Teppei; Otsuka-Kanazawa, Saori; Horino, Taro; Elewa, Yaser Hosny Ali; Kon, Yasuhiro

2017-03-01

Inbred MRL/MpJ mice show several unique phenotypes in tissue regeneration processes and the urogenital and immune systems. Clarifying the genetic and molecular bases of these phenotypes requires the analysis of their genetic susceptibility locus. Herein, hydronephrosis development was incidentally observed in MRL/MpJ-derived chromosome 11 (D11Mit21-212)-carrying C57BL/6N-based congenic mice, which developed bilateral or unilateral hydronephrosis in both males and females with 23.5% and 12.5% prevalence, respectively. Histopathologically, papillary malformations of the transitional epithelium in the pelvic-ureteric junction seemed to constrict the ureter luminal entrance. Characteristically, eosinophilic crystals were observed in the lumen of diseased ureters. These ureters were surrounded by infiltrating cells mainly composed of numerous CD3 +  T-cells and B220 +  B-cells. Furthermore, several Iba-1 +  macrophages, Gr-1 +  granulocytes, mast cells and chitinase 3-like 3/Ym1 (an important inflammatory lectin)-positive cells were detected. Eosinophils also accumulated to these lesions in diseased ureters. Some B6.MRL-(D11Mit21-D11Mit212) mice had duplicated ureters. We determined >100 single nucleotide variants between C57BL/6N- and MRL/MpJ-type chromosome 11 congenic regions, which were associated with nonsynonymous substitution, frameshift or stopgain of coding proteins. In conclusion, B6.MRL-(D11Mit21-D11Mit212) mice spontaneously developed hydronephrosis due to obstructive uropathy with inflammation. Thus, this mouse line would be useful for molecular pathological analysis of obstructive uropathy in experimental medicine.

RESIDU PESTISIDA PADA SAYURAN KUBIS (Brassica oleracea L. DAN KACANG PANJANG ( Vigna sinensis L. YANG DIPASARKAN DI PASAR BADUNG DENPASAR

Directory of Open Access Journals (Sweden)

K Agung Sudewa

2012-11-01

Full Text Available Pesticides residue of organophosphate and carbamate i.e. diazinon, chlorpyriphos, fentoate, carbaril and BPMC were tested on cabbage (Brassica oleracea L. and long bean (Vigna sinensis L.. The purpose of this study was to know the level of pesticides residue remaining on cabbage and long bean marketed in Badung Market, Denpasar.The samples were determined proportionally based on purposive sampling method. The proportion of sample was 10% of the total cabbage and snake bean sold in Badung market.Result of present study showed that residue of insecticides such as diazinon, chlorpyriphos, fentoate, carbaril, and BPMC remaining on the head of cabbage and snake bean marketed in Badung market was affected by the frequencies of their use in the field, in which chlorpyriphos was used by 60-65% of the farmers and carbaril by 40% of the farmers. Their residues on cabbage anf snake bean were 0.525 ppm and 1.296 ppm for chlorpyriphos (organophosphate; 0.303 ppm and 0.471 ppm for carbaril (carbamate. These result suggested that residue of chlorpyriphos on cabbage and snake bean were higher than MRL (Maximum Residue Limit for vegetable crops, i.e. 0.5 ppm.

Dissipation and Residue Level of Thifluzamide in Rice Field Ecosystem

Directory of Open Access Journals (Sweden)

Weitao Chen

2015-01-01

Full Text Available An efficient modified QuEChERS method combined with high performance liquid chromatography-tandem mass spectrometry detection (HPLC-MS/MS was established and evaluated for the residue analysis of thifluzamide in rice grain, husk, straw, seedling, paddy water, and soil. Thifluzamide residues were extracted with acetonitrile, cleaned up with primary secondary amine (PSA, and then determined by HPLC-MS/MS. The fortified recoveries were 76%–106% with RSDs of 3%–13%. The results of the supervised field trials at two experiment sites showed that thifluzamide dissipated rapidly in paddy fields, and the half-lives in paddy water, soil, and rice seedling were 0.3–0.6 d, 1.8–3.6 d, and 4.3–13.9 d, respectively. At harvest time, when the preharvest interval (PHI was set as 21 d, the final residues of thifluzamide in rice grains were below the maximum residue limit (MRL of 0.5 mg/kg set by Japan, whereas the final residues in rice husk and straw were still high (the highest value reached 1.36 mg/kg in rice husk and 0.83 mg/kg in rice straw. The results indicated that the highest residue in rice grain was 0.23 mg/kg when PHI was 21 d, and only 6.9–11.0% of acute risk quotient of thifluzamide was occupied by the dietary daily intake in Chinese population consuming rice.

Ginsenoside Rh1 Improves the Effect of Dexamethasone on Autoantibodies Production and Lymphoproliferation in MRL/lpr Mice

Directory of Open Access Journals (Sweden)

Yinglu Feng

2015-01-01

Full Text Available Ginsenoside Rh1 is able to upregulate glucocorticoid receptor (GR level, suggesting Rh1 may improve glucocorticoid efficacy in hormone-dependent diseases. Therefore, we investigated whether Rh1 could enhance the effect of dexamethasone (Dex in the treatment of MRL/lpr mice. MRL/lpr mice were treated with vehicle, Dex, Rh1, or Dex + Rh1 for 4 weeks. Dex significantly reduced the proteinuria and anti-dsDNA and anti-ANA autoantibodies. The levels of proteinuria and anti-dsDNA and anti-ANA autoantibodies were further decreased in Dex + Rh1 group. Dex, Rh1, or Dex + Rh1 did not alter the proportion of CD4+ splenic lymphocytes, whereas the proportion of CD8+ splenic lymphocytes was significantly increased in Dex and Dex + Rh1 groups. Dex + Rh1 significantly decreased the ratio of CD4+/CD8+ splenic lymphocytes compared with control. Con A-induced CD4+ splenic lymphocytes proliferation was increased in Dex-treated mice and was inhibited in Dex + Rh1-treated mice. Th1 cytokine IFN-γ mRNA was suppressed and Th2 cytokine IL-4 mRNA was increased by Dex. The effect of Dex on IFN-γ and IL-4 mRNA was enhanced by Rh1. In conclusion, our data suggest that Rh1 may enhance the effect of Dex in the treatment of MRL/lpr mice through regulating CD4+ T cells activation and Th1/Th2 balance.

Evaluation of regulatory variation and theoretical health risk for pesticide maximum residue limits in food.

Science.gov (United States)

Li, Zijian

2018-08-01

To evaluate whether pesticide maximum residue limits (MRLs) can protect public health, a deterministic dietary risk assessment of maximum pesticide legal exposure was conducted to convert global MRLs to theoretical maximum dose intake (TMDI) values by estimating the average food intake rate and human body weight for each country. A total of 114 nations (58% of the total nations in the world) and two international organizations, including the European Union (EU) and Codex (WHO) have regulated at least one of the most currently used pesticides in at least one of the most consumed agricultural commodities. In this study, 14 of the most commonly used pesticides and 12 of the most commonly consumed agricultural commodities were identified and selected for analysis. A health risk analysis indicated that nearly 30% of the computed pesticide TMDI values were greater than the acceptable daily intake (ADI) values; however, many nations lack common pesticide MRLs in many commonly consumed foods and other human exposure pathways, such as soil, water, and air were not considered. Normality tests of the TMDI values set indicated that all distributions had a right skewness due to large TMDI clusters at the low end of the distribution, which were caused by some strict pesticide MRLs regulated by the EU (normally a default MRL of 0.01 mg/kg when essential data are missing). The Box-Cox transformation and optimal lambda (λ) were applied to these TMDI distributions, and normality tests of the transformed data set indicated that the power transformed TMDI values of at least eight pesticides presented a normal distribution. It was concluded that unifying strict pesticide MRLs by nations worldwide could significantly skew the distribution of TMDI values to the right, lower the legal exposure to pesticide, and effectively control human health risks. Copyright © 2018 Elsevier Ltd. All rights reserved.

TRICHLOROETHYLENE ACCELERATES AN AUTOIMMUNE RESPONSE IN ASSOCIATION WITH TH1 T-CELL ACTIVATION IN MRL+/+ MICE. (R826409)

Science.gov (United States)

AbstractTrichloroethylene (1,1,2-trichloroethene) is a major environmental contaminant. There is increasing evidence relating exposure to trichloroethylene with autoimmunity. To investigate potential mechanisms, we treated the autoimmune-prone MRL+/+ mice with trichlo...

Comparison of IgM Capture Enzyme- Linked Immunosorbent Assay (ELISA) using Inhouse method and commercially available MRL kit for serological confirmation of dengue infection

International Nuclear Information System (INIS)

Hapugoda, D.M.; De Silva R, Nilanthi; Abeywickreme, W.; Gunasena, Sunethra; Prithimala, L.D.; Jayawardene, S.L.G.J.; Kumari, Thamara

2003-01-01

Laboratory diagnosis of dengue infection is important for the management of the patients. In this study igM capture ELISA using an inhouse method and commercially available kit (MRL diagnostics,USA) was compared to detect diagnostic capability of Inhouse IgM ELISA for provision of diagnostic facilities to the public at an affordable cost. Eighty acute and convalescent serum samples were collected from serologically confirmed dengue patients. Serological confirmation of patients were performed by Haemagglutination Inhibition (HI) assay, gold standard assay for dengue on paired serum samples. All collected acute and convalescent sera were tested by IgM ELISA using the inhouse method and MRL kit. Antigen and conjugate for the inhouse IgM method were prepared in the laboratory. A cocktail of four dengue antigens containing 25 Antigen ELISA units of each type was prepared and used as the assay antigen. Conjugate was prepared using a serum sample with high dengue Anti flavi IgG antibody titre conjugated with Horseradish peroxidase. A prospective study of both IgM ELISA assays were performed using 113 acute sera collected from dengue suspected cases. Overall results showed that 46% and 52% acute sera collected from dengue confirmed patients were positive by inhouse ELISA assay and MRL kits respectively. In the prospective study done using acute sera collected from dengue suspected patients showed that 44% and 52% were positive by inhouse ELISA assay and MRL kits. There was no significant difference in positivity between these two assays. (P=0.18). Inhouse IgM ELISA can be used for provision of laboratory diagnosis of dengue virus infection more than 5 days. The assay is 10 times less costly than using MRL kits as assay antigen and conjugate can be prepared easily in the laboratory

40 CFR 63.494 - Back-end process provisions-residual organic HAP limitations.

Science.gov (United States)

2010-07-01

... organic HAP limitations. 63.494 Section 63.494 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... § 63.494 Back-end process provisions—residual organic HAP limitations. (a) The monthly weighted average residual organic HAP content of all grades of elastomer processed, measured after the stripping operation...

Determination of Pesticides Residues in Cucumbers Grown in Greenhouse and the Effect of Some Procedures on Their Residues.

Science.gov (United States)

Leili, Mostafa; Pirmoghani, Amin; Samadi, Mohammad Taghi; Shokoohi, Reza; Roshanaei, Ghodratollah; Poormohammadi, Ali

2016-11-01

The objective of this study was to determine the residual concentrations of ethion and imidacloprid in cucumbers grown in greenhouse. The effect of some simple processing procedures on both ethion and imidacloprid residues were also studied. Ten active greenhouses that produce cucumber were randomly selected. Ethion and imidacloprid as the most widely used pesticides were measured in cucumber samples of studied greenhouses. Moreover, the effect of storing, washing, and peeling as simple processing procedures on both ethion and imidacloprid residues were investigated. One hour after pesticide application; the maximum residue levels (MRLs) of ethion and imidacloprid were higher than that of Codex standard level. One day after pesticide application, the levels of pesticides were decreased about 35 and 31% for ethion and imidacloprid, respectively, which still were higher than the MRL. Washing procedure led to about 51 and 42.5% loss in ethion and imidacloprid residues, respectively. Peeling procedure also led to highest loss of 93.4 and 63.7% in ethion and imidacloprid residues, respectively. The recovery for both target analytes was in the range between 88 and 102%. The residue values in collected samples one hour after pesticides application were higher than standard value. The storing, washing, and peeling procedures lead to the decrease of pesticide residues in greenhouse cucumbers. Among them, the peeling procedure has the greatest impact on residual reduction. Therefore, these procedures can be used as simple and effective processing techniques for reducing and removing pesticides from greenhouse products before their consumption.

Validation of an UHPLC-MS/MS Method for Screening of Antimicrobial Residues in Eggs and Their Application to Analyses of Eggs from Laying Hens Subjected to Pharmacological Treatment

Directory of Open Access Journals (Sweden)

Letícia Gomes Magnago Caldeira

2017-01-01

Full Text Available A multiresidue method by UHPLC/MS-MS was optimized and validated for the screening and semiquantitative detection of antimicrobials residues from tetracyclines, aminoglycosides, quinolones, lincosamides, β-lactams, sulfonamides, and macrolides families in eggs. A qualitative approach was used to ensure adequate sensitivity to detect residues at the level of interest, defined as maximum residue limit (MRL, or less. The applicability of the methods was assessed by analyzing egg samples from hens that had been subjected to pharmacological treatment with neomycin, enrofloxacin, lincomycin, oxytetracycline, and doxycycline during five days and after discontinuation of medication (10 days. The method was adequate for screening all studied analytes in eggs, since the performance parameters ensured a false-compliant rate below or equal to 5%, except for flumequine. In the analyses of eggs from laying hens subjected to pharmacological treatment, all antimicrobial residues were detected throughout the experimental period, even after discontinuation of medication, except for neomycin, demonstrating the applicability of the method for analyses of antimicrobial residues in eggs.

Pesticide residues in berries harvested from South-Eastern Poland (2009-2011).

Science.gov (United States)

Matyaszek, Aneta; Szpyrka, Ewa; Podbielska, Magdalena; Słowik-Borowiec, Magdalena; Kurdziel, Anna

2013-01-01

Poland is a leading grower/producer of berries in Europe that are either eaten raw or processed. As well as berries this includes fruit such as grapes, strawberries and other small fruits. Testing for the presence of active substances in Plant Protection Products, (PPP), in such fruit is however important, as part of measures taken to minimise human intake. To determine the incidence of pesticide residues in berries harvested from South-Eastern Poland in 2009-2011. . Chromatographic separation followed by analytical detection was performed on 250 samples of various test fruits using an accredited methodology: GC/ECD/NPD, together with spectrophotometric detection wherever necessary, according to PN-EN ISO/IEC 17025. As part of previous monitoring, 126 active substances were identified in 2009, 132 in 2010 and 153 in 2011; levels were compared to Maximum Residue Limits (MRLs). RESULTS;. Analyses showed that 46.4% of samples contained PPPs of which 4% exceeded the MRL. The most were found in raspberries, (58.8% of all tested), followed by 58.3% redcurrants, and gooseberries as well as 50% grapes. The most frequently found active substances of PPPs were pyrimethanil (15.6%), dithiocarbamates (12.4%), procymidone (8%), cyprodinil (5.6%) and difenoconazole (5.2%). The highest MRL exceedances were found in blackcurrants. Testing also revealed many examples of pesticides not recommended for the protection of specific crops: propiconazole in gooseberries, cyprodinil, flusilazole, iprodione, pyrimethanil in blackcurrants and folpet and captan in raspberries. Furthermore, active substances whose use in PPPs have been forbidden since 2008 were also detected, ie. endosulfan in blackcurrants and strawberries, fenitrothion in black and red currants as well as procymidone in raspberries, blackcurrants and strawberries. These data are consistent to those obtained from the whole of Poland and the European Union (EU). Most pesticides were present in raspberries, redcurrants

Boron and Coumaphos Residues in Hive Materials Following Treatments for the Control of Aethina tumida Murray.

Directory of Open Access Journals (Sweden)

Cesar Valdovinos-Flores

Full Text Available In the search of alternatives for controlling Aethina tumida Murray, we recently proposed the BAA trap which uses boric acid and an attractant which mimics the process of fermentation caused by Kodamaea ohmeri in the hive. This yeast is excreted in the feces of A. tumida causing the fermentation of pollen and honey of infested hives and releasing compounds that function as aggregation pheromones to A. tumida. Since the boron is the toxic element in boric acid, the aim of this article is to assess the amount of boron residues in honey and beeswax from hives treated with the BAA trap. For this aim, the amount of bioaccumulated boron in products of untreated hives was first determined and then compared with the amount of boron of products from hives treated with the BAA trap in two distinct climatic and soil conditions. The study was conducted in the cities of Padilla, Tamaulipas, and Valladolid, Yucatan (Mexico from August 2014 to March 2015. The quantity of boron in honey was significantly less in Yucatan than in Tamaulipas; this agrees with the boron deficiency among Luvisol and Leptosol soils found in Yucatan compared to the Vertisol soil found in Tamaulipas. In fact, the honey from Yucatan has lower boron levels than those reported in the literature. The BAA treatment was applied for four months, results show that the BAA trap does not have any residual effect in either honey or wax; i.e., there is no significant difference in boron content before and after treatment. On the other hand, the organophosphate pesticide coumaphos was found in 100% of wax samples and in 64% of honey samples collected from Yucatan. The concentration of coumaphos in honey ranges from 0.005 to 0.040 mg/kg, which are below Maximum Residue Limit (MRL allowed in the European Union (0.1 mg/kg but 7.14% of samples exceeded the MRL allowed in Canada (0.02 mg/kg.

Boron and Coumaphos Residues in Hive Materials Following Treatments for the Control of Aethina tumida Murray

Science.gov (United States)

Valdovinos-Flores, Cesar; Gaspar-Ramírez, Octavio; Heras–Ramírez, María Elena; Dorantes-Ugalde, José Antonio; Saldaña-Loza, Luz María

2016-01-01

In the search of alternatives for controlling Aethina tumida Murray, we recently proposed the BAA trap which uses boric acid and an attractant which mimics the process of fermentation caused by Kodamaea ohmeri in the hive. This yeast is excreted in the feces of A. tumida causing the fermentation of pollen and honey of infested hives and releasing compounds that function as aggregation pheromones to A. tumida. Since the boron is the toxic element in boric acid, the aim of this article is to assess the amount of boron residues in honey and beeswax from hives treated with the BAA trap. For this aim, the amount of bioaccumulated boron in products of untreated hives was first determined and then compared with the amount of boron of products from hives treated with the BAA trap in two distinct climatic and soil conditions. The study was conducted in the cities of Padilla, Tamaulipas, and Valladolid, Yucatan (Mexico) from August 2014 to March 2015. The quantity of boron in honey was significantly less in Yucatan than in Tamaulipas; this agrees with the boron deficiency among Luvisol and Leptosol soils found in Yucatan compared to the Vertisol soil found in Tamaulipas. In fact, the honey from Yucatan has lower boron levels than those reported in the literature. The BAA treatment was applied for four months, results show that the BAA trap does not have any residual effect in either honey or wax; i.e., there is no significant difference in boron content before and after treatment. On the other hand, the organophosphate pesticide coumaphos was found in 100% of wax samples and in 64% of honey samples collected from Yucatan. The concentration of coumaphos in honey ranges from 0.005 to 0.040 mg/kg, which are below Maximum Residue Limit (MRL) allowed in the European Union (0.1 mg/kg) but 7.14% of samples exceeded the MRL allowed in Canada (0.02 mg/kg). PMID:27092938

Altered circadian rhythms of the stress hormone and melatonin response in lupus-prone MRL/MP-fas(Ipr) mice.

Science.gov (United States)

Lechner, O; Dietrich, H; Oliveira dos Santos, A; Wiegers, G J; Schwarz, S; Harbutz, M; Herold, M; Wick, G

2000-06-01

The immune system interacts with the hypothalamo-pituitary-adrenal axis via so-called glucocorticoid increasing factors, which are produced by the immune system during immune reactions, causing an elevation of systemic glucocorticoid levels that contribute to preservation of the immune reactions specificities. Previous results from our laboratory had already shown an altered immuno-neuroendocrine dialogue via the hypothalamo-pituitary-adrenal axis in autoimmune disease-prone chicken and mouse strains. In the present study, we further investigated the altered glucocorticoid response via the hypothalamo-pituitary-adrenal axis in murine lupus. We established the circadian rhythms of corticosterone, dehydroepiandrosterone-sulfate, adrenocorticotropic hormone and melatonin, as well as the time response curves after injection of interleukin-1 of the first three parameters in normal SWISS and lupus-prone MRL/MP-fas(Ipr) mice. The results show that lupus-prone MRL/ MP-fas(Ipr) mice do not react appropriately to changes of the light/dark cycle, circadian melatonin rhythms seem to uncouple from the light/dark cycle, and plasma corticosterone levels are elevated during the resting phase. Diurnal changes of dehydroepiandrosterone-sulfate and adrenocorticotropic hormone were normal compared to healthy controls. These data indicate that MRL/ MP-fas(Ipr) mice not only show an altered glucocorticoid response mediated via the hypothalamo pituitary adrenal axis to IL-1, but are also affected by disturbances of corticosterone and melatonin circadian rhythms. Our findings may have implications for intrathymic T cell development and the emergence of autoimmune disease.

Fabric phase sorptive extraction of selected penicillin antibiotic residues from intact milk followed by high performance liquid chromatography with diode array detection.

Science.gov (United States)

Samanidou, Victoria; Michaelidou, Katia; Kabir, Abuzar; Furton, Kenneth G

2017-06-01

Fabric phase sorptive extraction (FPSE), a novel sorbent-based microextraction method, was evaluated as a simple and rapid strategy for the extraction of four penicillin antibiotic residues (benzylpenicillin, cloxacillin, dicloxacillin and oxacillin) from cows' milk, without prior protein precipitation. Time-consuming solvent evaporation and reconstitution steps were eliminated successfully from the sample preparation workflow. FPSE utilizes a flexible fabric substrate, chemically coated with sol-gel derived, highly efficient, organic-inorganic hybrid sorbent as the extraction medium. Herein short-chain poly(ethylene glycol) provided optimum extraction sensitivity for the selected penicillins, which were analysed using an RP-HPLC method, validated according to the European Decision 657/2002/EC. The limit of quantitation was 10μg/kg for benzylpenicillin, 20μg/kg for cloxacillin, 25μg/kg dicloxacillin and 30μg/kg oxacillin. These are a similar order of magnitude with those reported in the literature and (with the exception of benzylpenicillin) are less than the maximum residue limits (MRL) set by European legislation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Beta lactam antibiotics residues in cow's milk: comparison of efficacy of three screening tests used in Bosnia and Herzegovina.

Science.gov (United States)

Fejzic, Nihad; Begagic, Muris; Šerić-Haračić, Sabina; Smajlovic, Muhamed

2014-08-27

Beta lactam antibiotics are widely used in therapy of cattle, particularly for the treatment of mastitis.  Over 95% of residue testing in dairies in Bosnia and Herzegovina is for Beta lactams. The aim of this paper is to compare the efficacy of three most common screening tests for Beta lactam residues in cow's milk in our country. The tests used in the study are SNAP β Lactam test (Idexx), Rosa Charm β Lactam test and Inhibition MRL test. Study samples included: standardized concentrations of penicillin solution (0, 2, 3, 4, 5 and 6 ppb). In addition we tested milk samples from three equal size study groups (not receiving any antibiotic therapy, treated with Beta lactams for mastitis and treated with Beta lactams for diseases other than mastitis). Sensitivity and specificity were determined for each test, using standard penicillin concentrations with threshold value set at concentration of 4 ppb (Maximum residue level - MLR). Additionally we determined proportions of presumably false negative and false positive results for each test using results of filed samples testing. Agreement of test results for each test pair was assessed through Kappa coefficients interpreted by Landis-Koch scale. Detection level of all tests was shown to be well below MRL. This alongside with effects of natural inhibitors in milk contributed to finding of positive results in untreated and treated animals after the withholding period. Screening tests for beta lactam residues are important tools for ensuring that milk for human consumption is free from antibiotics residues.

Beta lactam antibiotics residues in cow's milk: comparison of efficacy of three screening tests used in Bosnia and Herzegovina

Directory of Open Access Journals (Sweden)

Nihad Fejzic

2014-08-01

Full Text Available Beta lactam antibiotics are widely used in therapy of cattle, particularly for the treatment of mastitis.  Over 95% of residue testing in dairies in Bosnia and Herzegovina is for Beta lactams. The aim of this paper is to compare the efficacy of three most common screening tests for Beta lactam residues in cow’s milk in our country. The tests used in the study are SNAP β Lactam test (Idexx, Rosa Charm β Lactam test and Inhibition MRL test. Study samples included: standardized concentrations of penicillin solution (0, 2, 3, 4, 5 and 6 ppb. In addition we tested milk samples from three equal size study groups (not receiving any antibiotic therapy, treated with Beta lactams for mastitis and treated with Beta lactams for diseases other than mastitis. Sensitivity and specificity were determined for each test, using standard penicillin concentrations with threshold value set at concentration of 4 ppb (Maximum residue level – MLR. Additionally we determined proportions of presumably false negative and false positive results for each test using results of filed samples testing. Agreement of test results for each test pair was assessed through Kappa coefficients interpreted by Landis-Koch scale. Detection level of all tests was shown to be well below MRL. This alongside with effects of natural inhibitors in milk contributed to finding of positive results in untreated and treated animals after the withholding period. Screening tests for beta lactam residues are important tools for ensuring that milk for human consumption is free from antibiotics residues.

Degradation kinetics and safety evaluation of buprofezin residues in grape (Vitis vinifera L.) and three different soils of India.

Science.gov (United States)

Oulkar, Dasharath P; Banerjee, Kaushik; Patil, Sangram H; Upadhyay, Ajay K; Taware, Praveen B; Deshmukh, Madhukar B; Adsule, Pandurang G

2009-02-01

This work was undertaken to determine the preharvest interval (PHI) of buprofezin to minimize its residues in grapes and thereby ensure consumer safety and avoid possible non-compliance in terms of residue violations in export markets. Furthermore, the residue dynamics in three grapevine soils of India was explored to assess its environmental safety. Residues dissipated following non-linear two-compartment first + first-order kinetics. In grapes, the PHI was 31 days at both treatments (312.5 and 625 g a.i. ha(-1)), with the residues below the maximum permissible intake even 1 h after foliar spraying. Random sampling of 5 kg comprising small bunchlets (8-10 berries) collected from a 1 ha area gave satisfactory homogeneity and representation of the population. A survey on the samples harvested after the PHI from supervised vineyards that received treatment at the recommended dose showed residues below the maximum residue limit (MRL) of 0.02 mg kg(-1) applicable for the European Union. In soil, the degradation rate was fastest in clay soil, followed by sandy loam and silty clay, with a half-life within 16 days in all the soils. The recommendation of the PHI proved to be effective in minimizing buprofezin residues in grapes. Thus, this work is of high practical significance to the domestic and export grape industry of India to ensure safety compliance in respect of buprofezin residues, keeping in view the requirements of international trade.

Pharmacokinetics, efficacy prediction indexes and residue depletion of antibacterial drugs.

Directory of Open Access Journals (Sweden)

Arturo Anadón

2016-06-01

Full Text Available Pharmacokinetics behaviour of the antibacterial in food producing animals, provides information on the rates of absorption and elimination, half-life in plasma and tissue, elimination pathways and metabolism. The dose and the dosing interval of the antimicrobial can be justified by considering the pharmacokinetic/pharmacodynamic (PK/PD relationship, if established, as well as the severity of the disease, whereas the number of administrations should be in line with the nature of the disease. The target population for therapy should be well defined and possible to identify under field conditions. Based on in vitro susceptibility data, and target animal PK data, an analysis for the PK/PD relationship may be used to support dose regimen selection and interpretation criteria for a clinical breakpoint. Therefore, for all antibacterials with systemic activity, the MIC data collected should be compared with the concentration of the compound at the relevant biophase following administration at the assumed therapeutic dose as recorded in the pharmacokinetic studies. Currently, the most frequently used parameters to express the PK/PD relationship are Cmax/MIC (maximum serum concentration/MIC, %T > MIC (fraction of time in which concentration exceeds MIC and AUC/MIC (area under the inhibitory concentration– time curve/MIC. Furthermore, the pharmacokinetic parameters provide the first indication of the potential for persistent residues and the tissues in which they may occur. The information on residue depletion in food-producing animals, provides the data on which MRL recommendations will be based. A critical factor in the antibacterial medication of all food-producing animals is the mandatory withdrawal period, defined as the time during which drug must not be administered prior to the slaughter of the animal for consumption. The withdrawal period is an integral part of the regulatory authorities’ approval process and is designed to ensure that no

Beta lactam antibiotics residues in cow’s milk: comparison of efficacy of three screening tests used in Bosnia and Herzegovina

Science.gov (United States)

Fejzić, Nihad; Begagić, Muris; Šerić-Haračić, Sabina; Smajlović, Muhamed

2014-01-01

Beta lactam antibiotics are widely used in therapy of cattle, particularly for the treatment of mastitis. Over 95% of residue testing in dairies in Bosnia and Herzegovina is for Beta lactams. The aim of this paper is to compare the efficacy of three most common screening tests for Beta lactam residues in cow’s milk in our country. The tests used in the study are SNAP β Lactam test (Idexx), Rosa Charm β Lactam test (Charm Sciences) and Inhibition MRL test (A&M). Study samples included: standardized concentrations of penicillin solution (0, 2, 3, 4, 5 and 6 ppb). In addition we tested milk samples from three equal size study groups (not receiving any antibiotic therapy, treated with Beta lactams for mastitis and treated with Beta lactams for diseases other than mastitis). Sensitivity and specificity were determined for each test, using standard penicillin concentrations with threshold value set at concentration of 4 ppb (Maximum residue level – MLR). Additionally we determined proportions of presumably false negative and false positive results for each test using results of filed samples testing. Agreement of test results for each test pair was assessed through Kappa coefficients interpreted by Landis-Koch scale. Detection level of all tests was shown to be well below MRL. This alongside with effects of natural inhibitors in milk contributed to finding of positive results in untreated and treated animals after the withholding period. Screening tests for beta lactam residues are important tools for ensuring that milk for human consumption is free from antibiotics residues. PMID:25172975

Global Harmonization of Maximum Residue Limits for Pesticides.

Science.gov (United States)

Ambrus, Árpád; Yang, Yong Zhen

2016-01-13

International trade plays an important role in national economics. The Codex Alimentarius Commission develops harmonized international food standards, guidelines, and codes of practice to protect the health of consumers and to ensure fair practices in the food trade. The Codex maximum residue limits (MRLs) elaborated by the Codex Committee on Pesticide Residues are based on the recommendations of the FAO/WHO Joint Meeting on Pesticides (JMPR). The basic principles applied currently by the JMPR for the evaluation of experimental data and related information are described together with some of the areas in which further developments are needed.

Food safety of milk and dairy product of dairy cattle from heavy metal contamination

Science.gov (United States)

Harlia, E.; Rahmah, KN; Suryanto, D.

2018-01-01

Food safety of milk and dairy products is a prerequisite for consumption, which must be free from physical, biological and chemical contamination. Chemical contamination of heavy metals Pb (Plumbum/Lead) and Cd (Cadmium) is generally derived from the environment such as from water, grass, feed additives, medicines and farm equipment. The contamination of milk and dairy products can affect quality and food safety for human consumption. The aim of this research is to investigate contamination of heavy metals Pb and Cd on fresh milk, pasteurized milk, and dodol milk compared with the Maximum Residue Limits (MRL). The methods of this researched was through case study and data obtained analyzed descriptively. Milk samples were obtained from Bandung and surrounding areas. The number of samples used was 30 samples for each product: 30 samples of fresh milk directly obtained from dairy farm, 30 samples of pasteurized milk obtained from street vendors and 30 samples of dodol milk obtained from home industry. Parameters observed were heavy metal residues of Pb and Cd. The results showed that: 1) approximately 83% of fresh milk samples were contaminated by Pb which 57% samples were above MRL and 90% samples were contaminated by Cd above MRL; 2) 67% of pasteurized milk samples were contaminated by Pb below MRL; 3) 60% of dodol milk samples were contaminated by Pb and Cd above MRL.

Tracking Differential Gene Expression in MRL/MpJ Versus C57BL/6 Anergic B Cells: Molecular Markers of Autoimmunity

Directory of Open Access Journals (Sweden)

Amy G. Clark

2008-01-01

Full Text Available Background: Anergy is a key mechanism controlling expression of autoreactive B cells and a major site for failed regulation in autoimmune diseases. Yet the molecular basis for this differentiated cell state remains poorly understood. The current lack of well-characterized surface or molecular markers hinders the isolation of anergic cells for further study. Global gene profiling recently identified transcripts whose expression differentiates anergic from naïve B cells in model mouse systems. The objective of the current study was to evaluate the molecular and cellular processes that differentiate anergic cells that develop in the healthy C57BL/6 (B6 milieu from those that develop in the autoimmune-prone MRL/MpJ (MRL background. This approach takes advantage of B6 and MRL mice bearing an anti-laminin Ig transgene with a well characterized anergic B cell phenotype.Results: Global gene expression was evaluated in purified transgenic B cells using Operon version 3.0 oligonucleotide microarray assaying 31,000 oligoprobes. Genes with a 2-fold expression difference in B6 as compared to MRL anergic B cells were identified. Expression of selected genes was confirmed using quantitative RT-PCR. This approach identified 43 probes corresponding to 37 characterized genes, including Ptpn22, CD74, Birc1f/Naip, and Ctla4, as differentially expressed in anergic B cells in the two strains. Gene Ontology classification identified differentiation, cell cycle, proliferation, development, apoptosis, and cell death as prominently represented ontology groups. Ingenuity Pathway Analysis identified two major networks incorporating 27 qualifying genes. Network 1 centers on beta-estradiol and TP53, and Network 2 encompasses RB1, p38 MAPK, and NFkB cell growth, proliferation, and cell cycle signaling pathways.Conclusion: Using microarray analysis we identified 37 characterized genes and two functional pathways engaged in maintenance of B cell anergy for which expression is

Risk Assessment of a Synthetic Pyrethroid, Bifenthrin on Pulses

OpenAIRE

Mukherjee, Irani; Singh, Ranbir; Govil, J. N.

2010-01-01

This work was undertaken to determine the pre-harvest interval of bifenthrin and to minimize its residues in pulses and thereby ensure consumer safety and avoid non-compliance in terms of residues violations in export market. Furthermore the residue dynamics in the soil under pulses was explored to assess the environmental safety. The residues of bifenthrin dissipated following first order kinetics. The residues in harvest time grains were below the maximum residue limit (MRL) of 0.02?mg/kg a...

The effect of hydroxychloroquine on lupus erythematosus-like skin lesions in MRL/lpr mice.

Science.gov (United States)

Shimomatsu, Tatsuya; Kanazawa, Nobuo; Mikita, Naoya; Nakatani, Yumi; Li, Hong-Jin; Inaba, Yutaka; Ikeda, Takaharu; Kondo, Toshikazu; Furukawa, Fukumi

2016-09-01

To evaluate the effect and safety of hydroxychloroquine (HCQ) on lupus erythematosus (LE)-like skin lesions in the MRL/lpr mouse, a model for systemic LE (SLE). We divided the MRL/lpr mice into three groups that were given: (1) drinking water, (2) HCQ at a dose of 4 mg/kg/d, or (3) HCQ at a dose of 40 mg/kg/d. The HCQ was administered to examine the effect and safety of HCQ on skin lesions and the number of infiltrating cells including mast cells in the dermis. Six of 13 mice in the group given drinking water, 3 of 11 mice in the group administered low-dose HCQ (4 mg/kg/d), and 1 of 10 mice in the group administered high-dose HCQ (40 mg/kg/d) presented the skin lesions. The average number of mast cells was 81, 50, and 12 (magnification, ×100), the mortality rate was 24%, 8%, and 9% and the mean body weight gain was 4.6 g, 8.0 g and 5.1 g, respectively. HCQ was demonstrated to decrease the appearance of LE-like lesions and the number of mast cells in the dermis. Furthermore, there were no obvious systemic adverse effects. This study provides evidence that suggests benefits in human patients.

Drug-like analogues of the parasitic worm-derived immunomodulator ES-62 are therapeutic in the MRL/Lpr model of systemic lupus erythematosus

Science.gov (United States)

Rodgers, D T; Pineda, M A; Suckling, C J; Harnett, W

2015-01-01

Introduction ES-62, a phosphorylcholine (PC)-containing immunomodulator secreted by the parasitic worm Acanthocheilonema viteae, protects against nephritis in the MRL/Lpr mouse model of systemic lupus erythematosus (SLE). However, ES-62 is not suitable for development as a therapy and thus we have designed drug-like small molecule analogues (SMAs) based around its active PC-moiety. To provide proof of concept that ES-62-based SMAs exhibit therapeutic potential in SLE, we have investigated the capacity of two SMAs to protect against nephritis when administered to MRL/Lpr mice after onset of kidney damage. Methods SMAs 11a and 12b were evaluated for their ability to suppress antinuclear antibody (ANA) generation and consequent kidney pathology in MRL/Lpr mice when administered after the onset of proteinuria. Results SMAs 11a and 12b suppressed development of ANA and proteinuria. Protection reflected downregulation of MyD88 expression by kidney cells and this was associated with reduced production of IL-6, a cytokine that exhibits promise as a therapeutic target for this condition. Conclusions SMAs 11a and 12b provide proof of principle that synthetic compounds based on the safe immunomodulatory mechanisms of parasitic worms can exhibit therapeutic potential as a novel class of drugs for SLE, a disease for which current therapies remain inadequate. PMID:26085597

Anaerobia Treatments of the domestic residual waters. Limitations potentialities

International Nuclear Information System (INIS)

Giraldo Gomez, Eugenio

1993-01-01

The quick growth of the Latin American cities has prevented that an appropriate covering of public services is achieved for the whole population, One of the undesirable consequences of this situation is the indiscriminate discharge from the domestic and industrial residual waters to the nearest bodies of water with its consequent deterioration and with disastrous consequences about the ecology and the public health. The developed countries have controlled this situation using systems of purification of the residual waters previously to their discharge in the receptor source. The same as the technology of the evacuation of the served waters, they have become numerous efforts for the application of the purification systems used in the countries developed to the socioeconomic, climatic and cultural conditions of our means. One of the results obtained in these efforts is the economic inability of the municipalities to pay the high investment costs and of operation of the traditional systems for the treatment of the residual waters. Contrary to another type of public services, the treatment of the residual waters needs of appropriate technological solutions for the Climatic and socioeconomic means of the developing countries, One of the technological alternatives for the purification of the residual waters that has had a great development in the last decades has been that of the biological treatments in t anaerobia ambient. The objective of this contribution is to present, to author's trial, the limitations and potentialities of this technology type with special emphasis in the case of the domestic residual waters

[Sulfur dioxide limit standard and residues in Chinese medicinal materials].

Science.gov (United States)

Kang, Chuan-Zhi; Yang, Wan-Zhen; Mo, Ge; Zhou, Li; Jiang, Jing-Yi; Lv, Chao-Geng; Wang, Sheng; Zhou, Tao; Yang, Ye; Guo, Lan-Ping

2018-01-01

The traditional sulfur fumigation processing method has been widely used in the initial processing and storage of traditional Chinese medicinal materials due to its economy, efficiency, convenience, high operability and effect on mold and insect prevention. However, excessive sulfur fumigation of traditional Chinese medicinal materials would lead to the changes in chemical compositions, and even endanger human health. This study showed that traditional Chinese medicinal materials were sulfur fumigated directly after being harvested for quick drying, or fumigated after being weted in the storage process for preventing mold and insects. We found that the sulfur dioxide limits for traditional Chinese medicinal materials were stricter than those for foods. Based on the existing limit standards, we obtained the data of sulfur dioxide residues for 35 types of traditional Chinese medicinal materials in a total of 862 batches. According to the limit standard in the Chinese Pharmacopoeia (150， 400 mg·kg⁻¹), the average over-standard rate of sulfur dioxide was as high as 52.43%, but it was reduced to 29.47% if calculated based on the limit for vegetable additive standard (500 mg·kg⁻¹). Sulfur fumigation issue shall be considered correctly: sulfur dioxide is a type of low toxic substance and less dangerous than aflatoxin and other highly toxic substances, and a small amount of residue would not increase the toxicity of traditional Chinese medicinal materials. However, sulfur fumigation might change the content of chemical substances and affect the quality of traditional Chinese medicinal materials. Furthermore, the exposure hazards of toxic substances are comprehensively correlated with exposure cycle, exposure frequency, and application method. In conclusion, it is suggested to strengthen the studies on the limit standard of traditional Chinese medicinal materials, formulate practical and feasible limit standard for sulfur dioxide residues in traditional Chinese

Developmental exposure to trichloroethylene promotes CD4+ T cell differentiation and hyperactivity in association with oxidative stress and neurobehavioral deficits in MRL+/+ mice

International Nuclear Information System (INIS)

Blossom, Sarah J.; Doss, Jason C.; Hennings, Leah J.; Jernigan, Stefanie; Melnyk, Stepan; James, S. Jill

2008-01-01

The non adult immune system is particularly sensitive to perinatal and early life exposures to environmental toxicants. The common environmental toxicant, trichloroethylene (TCE), was shown to increase CD4+ T cell production of the proinflammatory cytokine IFN-γ following a period of prenatal and lifetime exposure in autoimmune-prone MRL+/+ mice. In the current study, MRL+/+ mice were used to further examine the impact of TCE on the immune system in the thymus and periphery. Since there is considerable cross-talk between the immune system and the brain during development, the potential relationship between TCE and neurobehavioral endpoints were also examined. MRL+/+ mice were exposed to 0.1 mg/ml TCE (∼ 31 mg/kg/day) via maternal drinking water or direct exposure via the drinking water from gestation day 1 until postnatal day (PD) 42. TCE exposure did not impact gross motor skills but instead significantly altered social behaviors and promoted aggression associated with indicators of oxidative stress in brain tissues in male mice. The immunoregulatory effects of TCE involved a redox-associated promotion of T cell differentiation in the thymus that preceded the production of proinflammatory cytokines, IL-2, TNF-α, and IFN-γ by mature CD4+ T cells. The results demonstrated that developmental and early life TCE exposure modulated immune function and may have important implications for neurodevelopmental disorders

Screening of veterinary drug residues in food by LC-MS/MS. Background and challenges.

Science.gov (United States)

Delatour, Thierry; Racault, Lucie; Bessaire, Thomas; Desmarchelier, Aurélien

2018-04-01

Regulatory agencies and government authorities have established maximum residue limits (MRL) in various food matrices of animal origin for supporting governments and food operators in the monitoring of veterinary drug residues in the food chain, and ultimately in the consumer's plate. Today, about 200 veterinary drug residues from several families, mainly with antibiotic, antiparasitic or antiinflammatory activities, are regulated in a variety of food matrices such as milk, meat or egg. This article provides a review of the regulatory framework in milk and muscle including data from Codex Alimentarius, Europe, the U.S.A., Canada and China for about 220 veterinary drugs. The article also provides a comprehensive overview of the challenge for food control, and emphasizes the pivotal role of liquid chromatography-mass spectrometry (LC-MS), either in tandem with quadrupoles (LC-MS/MS) or high resolution MS (LC-HRMS), for ensuring an adequate consumer protection combined with an affordable cost. The capability of a streamlined LC-MS/MS platform for screening 152 veterinary drug residues in a broad range of raw materials and finished products is highlighted in a production line perspective. The rationale for a suite of four methods intended to achieve appropriate performance in terms of scope and sensitivity is presented. Overall, the platform encompasses one stream for the determination of 105 compounds in a run (based on acidic QuEChERS-like), plus two streams for 23 β-lactams (alkaline QuEChERS-like) and 10 tetracyclines (low-temperature partitioning), respectively, and a dedicated stream for 14 aminoglycosides (molecularly-imprinted polymer).

A simple, fast and cheap non-SPE screening method for antibacterial residue analysis in milk and liver using liquid chromatography-tandem mass spectrometry.

Science.gov (United States)

Martins, Magda Targa; Melo, Jéssica; Barreto, Fabiano; Hoff, Rodrigo Barcellos; Jank, Louise; Bittencourt, Michele Soares; Arsand, Juliana Bazzan; Schapoval, Elfrides Eva Scherman

2014-11-01

In routine laboratory work, screening methods for multiclass analysis can process a large number of samples in a short time. The main challenge is to develop a methodology to detect as many different classes of residues as possible, combined with speed and low cost. An efficient technique for the analysis of multiclass antibacterial residues (fluoroquinolones, tetracyclines, sulfonamides and trimethoprim) was developed based on simple, environment-friendly extraction for bovine milk, cattle and poultry liver. Acidified ethanol was used as an extracting solvent for milk samples. Liver samples were treated using EDTA-washed sand for cell disruption, methanol:water and acidified acetonitrile as extracting solvent. A total of 24 antibacterial residues were detected and confirmed using liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS), at levels between 10, 25 and 50% of the maximum residue limit (MRL). For liver samples a metabolite (sulfaquinoxaline-OH) was also monitored. A validation procedure was conducted for screening purposes in accordance with European Union requirements (2002/657/EC). The detection capability (CCβ) false compliant rate was less than 5% at the lowest level for each residue. Specificity and ruggedness were also discussed. Incurred and routine samples were analyzed and the method was successfully applied. The results proved that this method can be an important tool in routine analysis, since it is very fast and reliable. Copyright © 2014. Published by Elsevier B.V.

Qualitative and Quantitative Drug residue analyses: Florfenicol in white-tailed deer (Odocoileus virginianus) and supermarket meat by liquid chromatography tandem-mass spectrometry.

Science.gov (United States)

Anderson, Shanoy C; Subbiah, Seenivasan; Gentles, Angella; Austin, Galen; Stonum, Paul; Brooks, Tiffanie A; Brooks, Chance; Smith, Ernest E

2016-10-15

A method for confirmation and detection of Florfenicol amine residues in white-tailed deer tissues was developed and validated in our laboratory. Tissue samples were extracted with ethyl acetate and cleaned up on sorbent (Chem-elut) cartridges. Liguid chromatography (LC) separation was achieved on a Zorbax Eclipse plus C18 column with gradient elution using a mobile phase composed of ammonium acetate in water and methanol at a flow rate of 300μL/min. Qualitative and quantitative analyses were carried out using liquid chromatography - heated electrospray ionization(HESI) and atmospheric pressure chemical ionization (APCI)-tandem mass spectrometry in the multiple reaction monitoring (MRM) interface. The limits of detection (LODs) for HESI and APCI probe were 1.8ng/g and 1.4ng/g respectively. Limits of quantitation (LOQs) for HESI and APCI probe were 5.8ng/g and 3.4ng/g respectively. Mean recovery values ranged from 79% to 111% for APCI and 30% to 60% for HESI. The validated method was used to determine white-tailed deer florfenicol tissue residue concentration 10-days after exposure. Florfenicol tissue residues concentration ranged from 0.4 to 0.6μg/g for liver and 0.02-0.05μg/g for muscle and a trace in blood samples. The concentration found in the tested edible tissues were lower than the maximum residual limit (MRL) values established by the federal drug administration (FDA) for bovine tissues. In summary, the resulting optimization procedures using the sensitivity of HESI and APCI probes in the determination of florfenicol in white-tailed deer tissue are the most compelling conclusions in this study, to the extent that we have applied this method in the evaluation of supermarket samples drug residue levels as a proof of principle. Copyright © 2016. Published by Elsevier B.V.

Pesticide residue levels in green beans cultivated in Souss Masa valley (Morocco) after multiple applications of bifenthrin and λ-cyhalothrin.

Science.gov (United States)

Bouri, M; Salghi, R; Bazzi, Lh; Zarrouk, A; Rios, A; Zougagh, M

2012-09-01

Dissipation of bifenthrin and λ-cyhalothrin pyrethroid insecticides, under environmental conditions, was evaluated on green beans grown in experimental greenhouses (Souss Massa valley, Morocco). Pesticide residues were determined by gas chromatography with micro electron-capture detector (GC-μECD) after dichloromethane extraction and cleanup on florisil phase cartridges. In the case of field experiments, a random block scheme was employed. Each block contained 25 plants in a single row and tests were carried out in triplicates applying pesticides at the recommended doses by the manufacturers. Fruit samples were periodically taken until the end of the preharvest interval (p.i.). The results obtained showed that the p.i of bifenthrin in green bean were 4 days in the winter and 3.5 days in the spring, whereas that for λ-cyhalothrin 8 days was found in the winter and 7.5 days in the spring. Consequently, it is possible to consider the European Union maximum residue limit (EU MRL) values compatible with the proper agricultural practices used for growing green bean in the plastic greenhouse of Souss Massa valley in South Morocco. Bifenthrin had a degradation of first-order kinetics, whereas that of levels for λ-cyhalothrin residue can not be interpreted by the use of a first order model.

Uncertainty of food contamination origin and liability rules: Implications for bargaining power

OpenAIRE

Boutouis, M. Z.; Benhassine, W.; Perito, Maria Angela

2018-01-01

We propose an industrial organization model to analyze the role of bargaining power and liability rules in creating incentives for downstream and upstream supply chain operators to invest in good practices. We investigate the case in which either upstream production practices or downstream distribution may cause product contamination resulting in noncompliance with the authorized thresholds of residues (maximum residue limit [MRL]). We provide a comparative analysis of the retailers' liabilit...

Prevalence of antimicrobial residues in eggs, tissue and feed samples in the State of Kuwait

International Nuclear Information System (INIS)

Alomirah, H.; Al-Mazeedi, H.; Al-Zenki, S.; Al-Faili, B.; Al-Foudary, M.; Abuzid, A.; Al-Sayed, I.; Sidhu, J.

2007-01-01

A total of 238 locally produced and imported eggs, tissue (meat, poultry and aquacultured fish) and feed and feedstuffs samples were collected at different seasonal periods from different farms and retail outlets in Kuwait and screened for presence of beta-lactams, tetracyclines, sulfonamides, streptomycin, macrolides and chloramphenicol (799 tests) using Charm II system. The results indicated that all of the 222 tests performed on table egg samples were negative for the analyzed antimicrobial residues indicating adherence to the guidelines for microbial use and withdrawal. Similarly, all of the 268 tests performed on tissue samples were negative for the analyzed antimicrobial residues except for chloramphenicol. These chloramphenicol positive samples, all of the 66 tests performed were negative for beta-lactams residues. Out of the 79 feed and feedstuff samples analyzed for teracyclines residues, broiler diet and concentrate samples (5%) were above the tetracyclines MRL (100 ppb.). On the other hands, results have revealed a widespread of sulfonamide residues and to a less extent chloramphenicol in tested feed and feedstuff samples. The Charm II system was reliable for rapid screening of antimicrobial residues. In general, results obtained in our study necessitate more effective and well planned national antimicrobial residues surveillance programs focusing particularly on samples imported from highly risk sources. (author)

Exposure assessment of chemical hazards in pork meat, liver, and kidney, and health impact implication in Hung Yen and Nghe An provinces, Vietnam.

Science.gov (United States)

Tuyet-Hanh, Tran Thi; Sinh, Dang Xuan; Phuc, Pham Duc; Ngan, Tran Thi; Van Tuat, Chu; Grace, Delia; Unger, Fred; Nguyen-Viet, Hung

2017-02-01

This study assesses the risk of exposure to hazardous chemical residues in pork meat, liver, and kidney collected at wet markets in Nghe An and Hung Yen provinces and discusses health impact implication. 514 pig feed, kidney, liver, and pork samples were pooled and qualitatively and quantitatively analyzed for tetracyclines, fluoroquinolones, sulphonamide, chloramphenicol, β-agonists, and heavy metals. We compare the results with current regulations on chemical residues and discuss health implications. Legal antibiotics were found in feed. Tetracycline and fluoroquinolones were not present in pork, but 11% samples were positive with sulfamethazine above maximum residue limits (MRL); 11% of packaged feed and 4% of pork pooled samples were positive for chloramphenicol, a banned substance; two feed, two liver, and one pork samples were positive for β-agonists but did not exceed current MRL; 28% of pooled samples had lead, but all were below MRL; and all samples were negative for cadmium and arsenic. Thus, the health risks due to chemical hazards in pork in Hung Yen and Nghe An seemed not as serious as what were recently communicated to the public on the mass media. There is potential exposure to sulphonamide, chloramphenicol, and β-agonists from pork. Risk communication needs to focus on banned chemicals, while informing the public about the minimal risks associated with heavy metals.

The value and adaptation of plant uptake models in international trade of produce treated with crop protection products

DEFF Research Database (Denmark)

Kennedy, C.; Anderson, J.; Snyder, N.

2010-01-01

Crop Protection Product (CPP) national registrations and/or international trade require magnitude and decline of residue data for treated produce. These data are used to assess human dietary risk and establish legal limits (Maximum Residue Limits, MRLs) for traded produce. The ability to predict...... residues based on limited data sets affords business value by enabling informed product development decisions about the likelihood for MRL compliance for varied product use scenarios. Predicted residues can additionally support the design and conduct of time-constrained interdependent studies required...... for product registrations. While advances in predicting residues for the case of foliar applications of CPPs have been achieved, predictions for the case of soil applications of CPPs provide additional challenge. The adaptation of a newly developed dynamic model to CPP product use scenarios will be explored...

Contamination of food with residues of antibiotics in the sulphonamide class, risk can be avoided

Directory of Open Access Journals (Sweden)

Carmen Lidia Chitescu,

2010-12-01

Full Text Available Sulfadimethoxine, sulfamethoxazole, sulfaquinoxaline and sulfadiazine are the most common usedsulfonamides in veterinary practice. The recommended withdrawal periods if not observed before slaughteringof the medicated animals, the products may obtain from such animals may be contaminated with residue. Theinterest in having reliable methods able to detect low amounts of sulfonamides in food is very actual. In thisstudy, a multiresidue analysis was performed to simultaneously determine those four sulfonamides in chickenmuscle tissue by the Waters LC.Criteria of validation: specificity, accuracy, precision, limit of detection, limit of quantification, and linearity,according to the European Commission Decision 2002/657/EC, show that the method can detect differentkinds of sulfonamides within one run, without mass spectrometry analyses, or Fluor metric derivatization ofanalyts.The method is accurate, simple, economical in both time and cost, capable of detecting sulfonamidesresidues below the maximum residue limits (MRL and easy to perform to routine samples, in normal conditionof laboratory.The sulfonamides were extracted with acetonitrile and acetone and dichloromethane. N-hexane wasadded for defeating the sample. Separation was carried out on a Zorbax SB- C18 analytical column, using asmobile phase a mixture of 75:25 = di-natrium-hydrogenphosphat solution 6 g/1000 ml (pH = 8.5 : methanol.The detection wavelength was set at: 254 nm Calibration graphs were linear with very good correlationcoefficients in the concentration range from 0.320 to 1.5μg /mL. The limits of quantification (LOQ for thesulfonamides were in the range of 6.6–0.34 μg /kg. The recovery for spiked chicken muscle with 50–150 μg/kg ranged more than 70%. The relative standard deviation (Reds of the sulfonamides for six measurementsat 50 go/kg, 100 μg /kg and 150 μg /kg was less then 15%.The applicability of the method to the analysis of chicken muscle tissue was

AFNOR validation of Premi Test, a microbiological-based screening tube-test for the detection of antimicrobial residues in animal muscle tissue.

Science.gov (United States)

Gaudin, Valerie; Juhel-Gaugain, Murielle; Morétain, Jean-Pierre; Sanders, Pascal

2008-12-01

Premi Test contains viable spores of a strain of Bacillus stearothermophilus which is sensitive to antimicrobial residues, such as beta-lactams, tetracyclines, macrolides and sulphonamides. The growth of the strain is inhibited by the presence of antimicrobial residues in muscle tissue samples. Premi Test was validated according to AFNOR rules (French Association for Normalisation). The AFNOR validation was based on the comparison of reference methods (French Official method, i.e. four plate test (FPT) and the STAR protocol (five plate test)) with the alternative method (Premi Test). A preliminary study was conducted in an expert laboratory (Community Reference Laboratory, CRL) on both spiked and incurred samples (field samples). Several method performance criteria (sensitivity, specificity, relative accuracy) were estimated and are discussed, in addition to detection capabilities. Adequate agreement was found between the alternative method and the reference methods. However, Premi Test was more sensitive to beta-lactams and sulphonamides than the FPT. Subsequently, a collaborative study with 11 laboratories was organised by the CRL. Blank and spiked meat juice samples were sent to participants. The expert laboratory (CRL) statistically analysed the results. It was concluded that Premi Test could be used for the routine determination of antimicrobial residues in muscle of different animal origin with acceptable analytical performance. The detection capabilities of Premi Test for beta-lactams (amoxicillin, ceftiofur), one macrolide (tylosin) and tetracycline were at the level of the respective maximum residue limits (MRL) in muscle samples or even lower.

Multiresidue Analysis of 86 Pesticides Using Gas Chromatography Mass Spectrometry: II-Nonleafy Vegetables

Directory of Open Access Journals (Sweden)

M. H. EL-Saeid

2013-01-01

Full Text Available A total of 1057 samples of fresh vegetables from import and domestic production were analyzed (cold pepper, egg plant, carrot, cucumber, potato, hot pepper, cultivation tomato, squash, beans, okra, onions, cauliflower, and green house tomato. The aim of this study was to investigate pesticide residues in market foods in Riyadh, which have been collected from Riyadh Development Company (Al-Tamer Vegetables Market. Pesticide residues were determined by gas chromatography with mass selective detector (GC-MSD. A multiresidue method was developed and described for simultaneous determination of 86 pesticides commonly used in crop protection. This method used to determine 86 pesticide residues with a broad range of physicochemical properties in fresh vegetables related to organophosphorus (OPP, organochlorines (OCP, pyrethroids, and carbamates mainly used in agriculture. Sample extract was cleaned up by using AOAC method. Pesticide residues above the maximum residue limits (MRL were detected in 15.89% of the total samples (168 from 1057 samples, but 83.90% of the total samples (887 from 1057 samples has no residues or contained pesticide residues at or below MRL. The detected and most frequently found pesticide residues were permethrin (45 times and endosulfan (34 times followed by deltamethrin (27 times. The findings of this study pointed to the following recommendations: the need for a monitoring program for pesticide residues in imported food crops.

Effectiveness of control strategies against Botrytis cinerea in vineyard and evaluation of the residual fungicide concentrations.

Science.gov (United States)

Gabriolotto, Chiara; Monchiero, Matteo; Negre, Michele; Spadaro, Davide; Gullino, Maria Lodovica

2009-05-01

This investigation was undertaken to test different control strategies against Botrytis cinerea vineyards. Two commercial vineyards, "Barbera" and "Moscato," located in Piedmont (Northern Italy) were divided into seven plots and treated with different combinations of fungicides including fenhexamid, pyrimethanil, fludioxonil + cyprodinil, iprodione, and boscalid, a new carboxamide compound. An integrated strategy including a chemical (pyrimethanil) and a biocontrol agent (Trichoderma spp. t2/4ph1) was also included. At harvest, the percentage of bunches and berries attacked by B. cinerea and the concentration of the chemical fungicides were determined. All the pesticide residues at harvest were below the maximum residue level (MRL), except when two applications of pyrimethanil per season were applied. Boscalid was the most effective active ingredient against B. cinerea among the tested chemicals. When boscalid application was followed by a treatment with pyrimethanil, its efficacy was similar to that shown by two treatments of pyrimethanil. However, this second strategy was not feasible due to the risks of resistance development in the pathogen and to the residue accumulation as indicated by the analysis.

The oral mucosa of the MRL/I mouse: a synoptic picture of systemic autoimmune disorders.

Science.gov (United States)

Barbeau, J; Deslauriers, N

1991-07-01

The oral manifestations of systemic autoimmunity were investigated in a kinetic study of the MRL/1 mouse. Lesions in the epithelium, connective tissue and minor salivary glands were characterized in serial sections of the soft palate and the cheeks with respect to 1) the type of inflammatory cells present, 2) the presence and type of vasculitis, 3) the presence of necrosis, 4) the occurrence of deposits. By the age of 16 wk, 100% of our animals had developed mild to severe lesions in at least one compartment of the mucosa. Between 16 and 32 wk of age, pathologic manifestations affected the epithelial and subepithelial tissues, the striated muscle tissue, the vascular system and, much less frequently, the minor salivary gland network.

The Effect of Washing and Peeling on Reduction of Dithiocarbamates Residues in Cucumber and Tomato

Directory of Open Access Journals (Sweden)

Mohammad Reza Mehrasebi

2016-03-01

Full Text Available Background: Dithiocarbamates, the main group of fungicides, are used to control about 400 pathogens in more than 70 crops. These pesticides are widely applied to crops including potato, cereal, apple, pear and leafy vegetables throughout the world since 1960. From the late 1980s, using these fungicides has caused much debate among regulators about their long-term effects on consumers and occupational users. Method: In this study the residues of Dithiocarbamates in cucumber and tomato using the colorimetric method (Keppel method was measured. Respectively 80 and 45 samples of greenhouse cucumber and tomato were collected from Zanjan vegetables center in autumns and winter 2013. The samples were analyzed in 4 treatments of: unwashed, washing with water, washing whit detergent and peeling. Result: The results showed that the average concentration of Dithiocarbamates residues in unwashed greenhouse cucumber and tomatoes were 384.5 µg/kg and 65 µg/kg respectively. 35% and 5% of unwashed and water washed cucumber and tomato samples (respectively had higher Dithiocarbamates residue than MRL recommended by Institute of Standards and Industrial Research of Iran (0.5mg/kg. Conclusion: The treatments of washing and peeling had significant effect on the reduction of Dithiocarbamates residues in the all samples.

Implementation of the Bacillus cereus microbiological plate used for the screening of tetracyclines in raw milk samples with STAR protocol - the problem with false-negative results solved.

Science.gov (United States)

Raspor Lainšček, P; Biasizzo, M; Henigman, U; Dolenc, J; Kirbiš, A

2014-01-01

In antibiotic residue analyses the first step of screening is just as important as the following steps. Screening methods need to be quick and inexpensive, but above all sensitive enough to detect the antibiotic residue at or below the maximum residue limit (MRL). In the case of a positive result, the next step is conducted and further methods are used for confirmation. MRLs stated in European Union Regulation 37/2010 for tetracyclines in raw milk are: 100 µg kg(-1) for tetracycline, 100 µg kg(-1) for oxytetracycline, 100 µg kg(-1) for chlortetracycline and no limit for doxycycline because it is prohibited for use in animals from which milk is produced for human consumption. The current five-plate microbiological screening method for the detection of antibiotic residues in raw milk was found to be simple and inexpensive, but not specific, sensitive and reliable enough to detect tetracycline at MRL in routine raw milk screening procedures. Spiking samples with tetracycline at the MRL level and applying them on Bacillus cereus ATCC 11778 microbiological plates often gave false-negative results, indicating that tetracyclines may have to be inactivated or masked. Tetracyclines seem to bind to a certain component in milk. Consequently, when applying samples to the B. cereus microbiological plate the antibiotic cannot inhibit the growth of B. cereus which disables the formation of inhibition zones on the test plate. After adding the appropriate amount of citric acid into the milk samples, we solved the problem of false-negative results. During the validation 79 samples of milk were spiked with tetracyclines at different concentrations: 100 µg kg(-1) for tetracycline, 100 µg kg(-1) for oxytetracycline, 80 µg kg(-1) for chlortetracycline and 30 µg kg(-1) for doxycycline. Concentrations used in the validation matched the requirements for MRLs (they were either at or below the MRLs) stated in European Union Regulation 37/2010. The sensitivity of the validation was 100%.

Multi-residue method for the determination of antibiotics and some of their metabolites in seafood.

Science.gov (United States)

Serra-Compte, Albert; Álvarez-Muñoz, Diana; Rodríguez-Mozaz, Sara; Barceló, Damià

2017-06-01

The presence of antibiotics in seafood for human consumption may pose a risk for consumers. A methodology for the analysis of antibiotics in seafood based on QuEChERS (quick, easy, cheap, effective, rugged, and safe) extraction, followed by detection and quantification using liquid chromatography coupled to mass spectrometry was developed. The analytical method was evaluated for the determination of 23 antibiotics (including parent compounds and some metabolites) in fish, mussels and clams. Recoveries ranged between 30% and 70% for most of the compounds and method detection and quantification limits (MDLs and MQLs) were between 0.01 and 0.31 ng/g dry weigh (dw) and 0.02-1.03 ng/g (dw) respectively. Real seafood samples were analysed using this method. Nine antibiotics were found at levels above MDLs; however none of them exceed the maximum residue limits (MRL) established by the authorities. Tetracycline was the most ubiquitous compound, presenting also the highest concentration: 5.63 ng/g (dw) in fish from Netherlands. In addition, an alternative technique based on microbial growth inhibition was explored as semiquantitative detection method of antibiotics in seafood. This methodology could be applied as a fast screening technique for the detection of macrolides and β-lactams in seafood but further research is needed for other antibiotics families. Copyright © 2016 Elsevier Ltd. All rights reserved.

Tylosin depletion from edible pig tissues.

Science.gov (United States)

Prats, C; El Korchi, G; Francesch, R; Arboix, M; Pérez, B

2002-12-01

The depletion of tylosin from edible pig tissues was studied following 5 days of intramuscular (i.m.) administration of 10 mg/kg of tylosin to 16 crossbreed pigs. Animals were slaughtered at intervals after treatment and samples of muscle, kidney, liver, skin+fat, and injection site were collected and analysed by high-performance liquid chromatography (HPLC). Seven days after the completion of treatment, the concentration of tylosin in kidney, skin+fat, and at the injection site was higher than the European Union maximal residue limit (MRL) of 100 microg/kg. Tylosin residues in all tissues were below the quantification limit (50 microg/kg) at 10 and 14 days post-treatment.

Wound trauma mediated inflammatory signaling attenuates a tissue regenerative response in MRL/MpJ mice

Directory of Open Access Journals (Sweden)

Elster Eric A

2010-05-01

Full Text Available Abstract Background Severe trauma can induce pathophysiological responses that have marked inflammatory components. The development of systemic inflammation following severe thermal injury has been implicated in immune dysfunction, delayed wound healing, multi-system organ failure and increased mortality. Methods In this study, we examined the impact of thermal injury-induced systemic inflammation on the healing response of a secondary wound in the MRL/MpJ mouse model, which was anatomically remote from the primary site of trauma, a wound that typically undergoes scarless healing in this specific strain. Ear-hole wounds in MRL/MpJ mice have previously displayed accelerated healing and tissue regeneration in the absence of a secondary insult. Results Severe thermal injury in addition to distal ear-hole wounds induced marked local and systemic inflammatory responses in the lungs and significantly augmented the expression of inflammatory mediators in the ear tissue. By day 14, 61% of the ear-hole wounds from thermally injured mice demonstrated extensive inflammation with marked inflammatory cell infiltration, extensive ulceration, and various level of necrosis to the point where a large percentage (38% had to be euthanized early during the study due to extensive necrosis, inflammation and ear deformation. By day 35, ear-hole wounds in mice not subjected to thermal injury were completely closed, while the ear-hole wounds in thermally injured mice exhibited less inflammation and necrosis and only closed partially (62%. Thermal injury resulted in marked increases in serum levels of IL-6, TNFα, KC (CXCL1, and MIP-2α (CXCL2. Interestingly, attenuated early ear wound healing in the thermally injured mouse resulted in incomplete tissue regeneration in addition to a marked inflammatory response, as evidenced by the histological appearance of the wound and increased transcription of potent inflammatory mediators. Conclusion These findings suggest that the

On conditional residual lifetime and conditional inactivity time of k-out-of-n systems

International Nuclear Information System (INIS)

Tavangar, Mahdi; Bairamov, Ismihan

2015-01-01

In designing structures of technical systems, the reliability engineers often deal with the reliability analysis of coherent systems. Coherent system has monotone structure function and all components of the system are relevant. This paper considers some particular models of coherent systems having identical components with independent lifetimes. The main purpose of the paper is to study conditional residual lifetime of coherent system, given that at a fixed time certain number of components have failed but still there are some functioning components. Different aging and stochastic properties of variables connected with the conditional residual lifetimes of the coherent systems are obtained. An expression for the parent distribution in terms of conditional mean residual lifetime is provided. The similar result is obtained for the conditional mean inactivity time of the failed components of coherent system. The conditional mean inactivity time of failed components presents an interest in many engineering applications where the reliability of system structure is important for designing and constructing of systems. Some illustrative examples with given particular distributions are also presented. - Highlights: • Comparisons of conditional residual lifetime of k-out-of-n systems are derived. • The behavior of the coherent system is explored for IHR distributions. • The parent distribution is expressed in terms of conditional MRL and MIT. • Some illustrative examples are given to clarify the results of the paper.

Quantification of 8-α-hydroxy-mutilin as marker residue for tiamulin in rabbit tissues by high-performance liquid chromatography-mass spectrometry.

Science.gov (United States)

De Baere, Siegrid; Devreese, Mathias; Maes, An; De Backer, Patrick; Croubels, Siska

2015-06-01

For the first time, a sensitive and specific method was developed and fully validated for the quantification of the EU marker residue of tiamulin, 8-α-hydroxy-mutilin, in rabbit muscle and liver tissues using liquid chromatography combined with positive heated electrospray ionization triple quadrupole mass spectrometry. The mass spectrometer was operated in the selected reaction monitoring (SRM) mode with selection of the [M + H](+) ion in both quadrupoles 1 and 3, resulting in the SRM transition m/z 337.25 > 337.25 for quantification. Chromatography was performed using a Hypersil Gold C18 column using a gradient elution program with water and methanol as mobile phases. The sample preparation procedure for the analysis of 8-α-hydroxy-mutilin in liver and muscle samples consisted of three main steps: (1) extraction of the tissue matrix using 0.1 N hydrochloric acid/acetone (50/50, v/v), (2) hydrolysis of tiamulin and metabolites to 8-α-hydroxy-mutilin in alkaline medium at 45 °C, and (3) liquid-liquid extraction in acidic medium using ethyl acetate. This is the first method presenting fully validated results, encompassing a linearity of 50 to 2,000 μg/kg, within-run and between-run accuracy and precision, limit of quantification (50 μg/kg for both muscle and liver tissues), limit of detection (muscle, 11.9 μg/kg; liver, 20.6 μg/kg), extraction recovery (muscle, 66.2%; liver, 75.5%), signal suppression and enhancement (muscle, 51.7%; liver, 43.3%), carryover, applicability and practicability, and stability during storage and analysis. This novel method is therefore sensitive enough to be used for residue depletion studies of tiamulin in rabbits and for food safety monitoring with respect to MRL compliance of residues.

Influence of fenamidone, indoxacarb, pyraclostrobin, and deltamethrin on the population of natural yeast microflora during winemaking of two sardinian grape cultivars.

Science.gov (United States)

Zara, Severino; Caboni, Pierluigi; Orro, Davide; Farris, Giovanni Antonio; Pirisi, Filippo; Angioni, Alberto

2011-01-01

The influence of fenamidone ((S)-1-anilino-4-methyl-2-methylthio-4-phenylimidazolin-5-one), pyraclostrobin (methyl 2-[1-(4-chlorophenyl)pyrazol-3-yloxymethyl]-N-methoxycarbanilate), indoxacarb (methyl 7-Chloro-2,5-dihydro-2-[[(methoxycarbonyl) [4- (trifluoromethoxy) phenyl] amino] carbonyl] indeno[1,2-e][1,3,4] oxadiazine-4a(3H)-carboxylate), and deltamethrin ([cyano-[3-(phenoxy)phenyl]methyl] 3-(2,2-dibromoethenyl)-2,2-dimethylcyclopropane-1-carboxylate) on spontaneous fermentation carried out by natural yeast grapes microflora, was studied during the wine-making process. Aliquots of pesticide standard solutions were added to the grapes before crushing, to reach a concentration equal or half the maximum residue limit (MRL). Vinifications were performed, with maceration (R), or without maceration (W). During the wine-making process, samples were taken at the beginning (one hour after grapes crushing), at the middle and at the end of the spontaneous fermentation process. At half the MRL concentration, deltamethrin affected Pichia sp. population with a decrease of almost 50 %, while fenamidone decreased Candida sp., Candida stellata at 83, and 36%, respectively. Metschnikowia pulcherrima population decreased in all samples when compared to the control. Experiments at MRL levels showed a strong reduction for all non-Saccharomyces yeast species, when grapes had been treated with pyraclostrobin, fenamidone, and deltamethrine, except for Candida sp. which was found to have been affected only by fenamidone residues. Growth zone inhibition test showed only an in vitro activity of pyraclostrobin over Kloeckera spp., C. stellata, and M. pulcherrima. Microvinification experiments produced wines with no differences concerning S. cerevisiae population as well as production of ethanol and residual sugars. Experiments showed that at the end of the fermentation process pesticides were adsorbed by the lees and grape skins, and no pesticides residue was detectable in wine.

Risk assessment of a synthetic pyrethroid, bifenthrin on pulses.

Science.gov (United States)

Mukherjee, Irani; Singh, Ranbir; Govil, J N

2010-03-01

This work was undertaken to determine the pre-harvest interval of bifenthrin and to minimize its residues in pulses and thereby ensure consumer safety and avoid non-compliance in terms of residues violations in export market. Furthermore the residue dynamics in the soil under pulses was explored to assess the environmental safety. The residues of bifenthrin dissipated following first order kinetics. The residues in harvest time grains were below the maximum residue limit (MRL) of 0.02 mg/kg applicable for European Union. In soil the degradation rate was fast with a half life of 2-3 days. This work is of high practical significance to the domestic and export pulse industry of India to ensure safety compliance in respect of bifenthrin residues, keeping in view the requirements of international trade.

Risk of DDT residue in maize consumed by infants as complementary diet in southwest Ethiopia.

Science.gov (United States)

Mekonen, Seblework; Lachat, Carl; Ambelu, Argaw; Steurbaut, Walter; Kolsteren, Patrick; Jacxsens, Liesbeth; Wondafrash, Mekitie; Houbraken, Michael; Spanoghe, Pieter

2015-04-01

Infants in Ethiopia are consuming food items such as maize as a complementary diet. However, this may expose infants to toxic contaminants like DDT. Maize samples were collected from the households visited during a consumption survey and from markets in Jimma zone, southwestern Ethiopia. The residues of total DDT and its metabolites were analyzed using the Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) method combined with dispersive solid phase extraction cleanup (d-SPE). Deterministic and probabilistic methods of analysis were applied to determine the consumer exposure of infants to total DDT. The results from the exposure assessment were compared with the health based guidance value in this case the provisional tolerable daily intake (PTDI). All maize samples (n=127) were contaminated by DDT, with a mean concentration of 1.770 mg/kg, which was far above the maximum residue limit (MRL). The mean and 97.5 percentile (P 97.5) estimated daily intake of total DDT for consumers were respectively 0.011 and 0.309 mg/kg bw/day for deterministic and 0.011 and 0.083 mg/kg bw/day for probabilistic exposure assessment. For total infant population (consumers and non-consumers), the 97.5 percentile estimated daily intake were 0.265 and 0.032 mg/kg bw/day from the deterministic and probabilistic exposure assessments, respectively. Health risk estimation revealed that, the mean and 97.5 percentile for consumers, and 97.5 percentile estimated daily intake of total DDT for total population were above the PTDI. Therefore, in Ethiopia, the use of maize as complementary food for infants may pose a health risk due to DDT residue. Copyright © 2014 Elsevier B.V. All rights reserved.

Evaluation of the Presence and Levels of Enrofloxacin, Ciprofloxacin, Sulfaquinoxaline and Oxytetracycline in Broiler Chickens after Drug Administration.

Science.gov (United States)

de Assis, Débora Cristina Sampaio; da Silva, Guilherme Resende; Lanza, Isabela Pereira; Ribeiro, Ana Cláudia Dos Santos Rossi; Lana, Ângela Maria Quintão; Lara, Leonardo José Camargos; de Figueiredo, Tadeu Chaves; Cançado, Silvana de Vasconcelos

2016-01-01

The depletion times of enrofloxacin and its metabolite ciprofloxacin as well as sulfaquinoxaline and oxytetracycline were evaluated in broiler chickens that had been subjected to pharmacological treatment. The presence and residue levels of these drugs in muscle tissue were evaluated using an ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method that was validated in this work. The results showed the presence of all antimicrobial residues; however, the presence of residues at concentrations higher than the drugs' maximum residue limit (MRL) of 100 μg kg-1 was found only during the treatment period for oxytetracycline and until two days after discontinuation of the medication for enrofloxacin, ciprofloxacin and sulfaquinoxaline. It was concluded that the residues of all antimicrobials were rapidly metabolized from the broiler muscles; after four days of withdrawal, the levels were lower than the limit of quantification (LOQ) of the method for the studied analytes.

Comparative study of three screening tests, two microbiological tube tests, and a multi-sulphonamide ELISA kit for the detection of antimicrobial and sulphonamide residues in eggs.

Science.gov (United States)

Gaudin, V; Hedou, C; Rault, A; Sanders, P; Verdon, E

2009-04-01

The screening of antimicrobial residues in eggs is an especially important subject. Three different commercial kits for the screening of sulphonamides and other antimicrobials in eggs were validated in accordance with Decision 2002/657/EC: one enzyme-linked immunoabsorbant assay (ELISA) kit multi-sulphonamides (from RAISIO Diagnostics) and two microbiological tests (a Premi test from DSM and an Explorer kit from Zeu-Inmunotec). The false-positive rates were lower than 2% for all kits. The detection capabilities (CCbeta) have to be as low as possible for banned substances and lower than the maximum residue limit (MRL) when MRLs have been set. The sensitivity of the Premi test was better than that of the Explorer test, probably because of the dilution of the eggs before the Explorer test was used. The CCbeta values towards most of the tested sulphonamides were satisfactory with the Premi test (amoxicillin, neomycin, tylosin and erythromycin were lower than their respective MRLs. Detection capabilities for sulphonamides were much lower for the ELISA kit than for microbiological tests. The ELISA kit could be recommended for the targeted screening of sulphonamides in eggs. On the other hand, the Explorer and Premi tests could be used as wide screening tests allowing the detection of most of the antimicrobial families.

Intra-articular delivery of purified mesenchymal stem cells from C57BL/6 or MRL/MpJ superhealer mice prevents post-traumatic arthritis

OpenAIRE

Diekman, Brian O.; Wu, Chia-Lung; Louer, Craig R.; Furman, Bridgette D.; Huebner, Janet L.; Kraus, Virginia B.; Olson, Steven A.; Guilak, Farshid

2012-01-01

Joint injury dramatically enhances the onset of osteoarthritis (OA) and is responsible for an estimated 12% of OA. Post-traumatic arthritis (PTA) is especially common after intraarticular fracture, and no disease-modifying therapies are currently available. We hypothesized that the delivery of mesenchymal stem cells (MSCs) would prevent PTA by altering the balance of inflammation and regeneration after fracture of the mouse knee. Additionally, we examined the hypothesis that MSCs from the MRL...

Differential immune responses to albumin adducts of reactive intermediates of trichloroethene in MRL+/+ mice

International Nuclear Information System (INIS)

Cai Ping; Koenig, Rolf; Khan, M. Firoze; Kaphalia, Bhupendra S.; Ansari, G.A.S.

2007-01-01

Trichloroethene (TCE) is an industrial degreasing solvent and widespread environmental contaminant. Exposure to TCE is associated with autoimmunity. The mode of action of TCE is via its oxidative metabolism, and most likely, immunotoxicity is mediated via haptenization of macromolecules and subsequent induction of immune responses. To better understand the role of protein haptenization through TCE metabolism, we immunized MRL+/+ mice with albumin adducts of various TCE reactive intermediates. Serum immunoglobulins and cytokine levels were measured to determine immune responses against haptenized albumin. We found antigen-specific IgG responses of the IgG subtypes IgG 1 , IgG 2a , and IgG 2b , with IgG 1 predominating. Serum levels of G-CSF were increased in immunized mice, suggesting macrophage activation. Liver histology revealed lymphocyte infiltration in the lobules and the portal area following immunization with formyl-albumin. Our findings suggest that proteins haptenized by metabolites of TCE may act as neo-antigens that can induce humoral immune responses and T cell-mediated hepatitis

Reconstruction for limited-projection fluorescence molecular tomography based on projected restarted conjugate gradient normal residual.

Science.gov (United States)

Cao, Xu; Zhang, Bin; Liu, Fei; Wang, Xin; Bai, Jing

2011-12-01

Limited-projection fluorescence molecular tomography (FMT) can greatly reduce the acquisition time, which is suitable for resolving fast biology processes in vivo but suffers from severe ill-posedness because of the reconstruction using only limited projections. To overcome the severe ill-posedness, we report a reconstruction method based on the projected restarted conjugate gradient normal residual. The reconstruction results of two phantom experiments demonstrate that the proposed method is feasible for limited-projection FMT. © 2011 Optical Society of America

Evaluation of the Presence and Levels of Enrofloxacin, Ciprofloxacin, Sulfaquinoxaline and Oxytetracycline in Broiler Chickens after Drug Administration

Science.gov (United States)

da Silva, Guilherme Resende; Lanza, Isabela Pereira; Ribeiro, Ana Cláudia dos Santos Rossi; Lana, Ângela Maria Quintão; Lara, Leonardo José Camargos

2016-01-01

The depletion times of enrofloxacin and its metabolite ciprofloxacin as well as sulfaquinoxaline and oxytetracycline were evaluated in broiler chickens that had been subjected to pharmacological treatment. The presence and residue levels of these drugs in muscle tissue were evaluated using an ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method that was validated in this work. The results showed the presence of all antimicrobial residues; however, the presence of residues at concentrations higher than the drugs’ maximum residue limit (MRL) of 100 μg kg-1 was found only during the treatment period for oxytetracycline and until two days after discontinuation of the medication for enrofloxacin, ciprofloxacin and sulfaquinoxaline. It was concluded that the residues of all antimicrobials were rapidly metabolized from the broiler muscles; after four days of withdrawal, the levels were lower than the limit of quantification (LOQ) of the method for the studied analytes. PMID:27846314

Developing an Integrated Model Framework for the Assessment of Sustainable Agricultural Residue Removal Limits for Bioenergy Systems

Energy Technology Data Exchange (ETDEWEB)

David Muth, Jr.; Jared Abodeely; Richard Nelson; Douglas McCorkle; Joshua Koch; Kenneth Bryden

2011-08-01

Agricultural residues have significant potential as a feedstock for bioenergy production, but removing these residues can have negative impacts on soil health. Models and datasets that can support decisions about sustainable agricultural residue removal are available; however, no tools currently exist capable of simultaneously addressing all environmental factors that can limit availability of residue. The VE-Suite model integration framework has been used to couple a set of environmental process models to support agricultural residue removal decisions. The RUSLE2, WEPS, and Soil Conditioning Index models have been integrated. A disparate set of databases providing the soils, climate, and management practice data required to run these models have also been integrated. The integrated system has been demonstrated for two example cases. First, an assessment using high spatial fidelity crop yield data has been run for a single farm. This analysis shows the significant variance in sustainably accessible residue across a single farm and crop year. A second example is an aggregate assessment of agricultural residues available in the state of Iowa. This implementation of the integrated systems model demonstrates the capability to run a vast range of scenarios required to represent a large geographic region.

Application of zirconium dioxide nanoparticle sorbent for the clean-up step in post-harvest pesticide residue analysis.

Science.gov (United States)

Uclés, Ana; Herrera López, Sonia; Dolores Hernando, Maria; Rosal, Roberto; Ferrer, Carmen; Fernández-Alba, Amadeo R

2015-11-01

The use of yttria-stabilized zirconium dioxide nanoparticles as d-SPE clean-up sorbent for a rapid and sensitive liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) method for the determination of post-harvest fungicides (carbaryl, carbendazim, chlorpropham, diphenylamine, ethoxyquin, flutriafol, imazalil, iprodione, methomyl, myclobutanil, pirimiphos-methyl, prochloraz, pyrimethanil, thiabendazole, thiophanate-methyl and tolclofos-methyl) in orange and pear samples has been evaluated and validated. The sample preparation was a modification of the QuEChERS extraction method using yttria-stabilized zirconium dioxide and multi-walled carbon nanotubes (MWCNTs) nanoparticles as the solid phase extraction (d-SPE) clean-up sorbents prior to injecting the ten-fold diluted extracts into the LC system. By using the yttria-stabilized zirconium dioxide extraction method, more recoveries in the 70-120% range were obtained - thus this method was used for the validation. Quantification was carried out using a matrix-matched calibration curve which was linear in the 1-500 µg kg(-1) range for almost all the pesticides studied. The validated limit of quantification was 10 µg kg(-1) for most of the studied compounds, except chlorpropham, ethoxyquin and thiophanate-methyl. Pesticide recoveries at the 10 and 100 µg kg(-1) concentration levels were satisfactory, with values between 77% and 120% and relative standard deviations (RSD) lower than 10% (n=5). The developed method was applied for the determination of selected fungicides in 20 real orange and pear samples. Four different pesticide residues were detected in 10 of these commodities; 20% of the samples contained pesticide residues at a quantifiable level (equal to or above the LOQs) for at least one pesticide residue. The most frequently-detected pesticide residues were: carbendazim, thiabendazole and imazalil-all were below the MRL. The highest concentration found was imazalil at 1175 µg kg

Pesticide usage pattern in tea ecosystem, their retrospects and alternative measures.

Science.gov (United States)

Gurusubramanian, G; Rahman, A; Sarmah, M; Ray, Somnath; Bora, S

2008-11-01

Tea is a perennial plantation crop grown under monoculture providing favorable conditions for a variety of pests. The concept of pest control has undergone a considerable change over the past few decades. In recent years there has been a greater dependence on the use of pesticides (7.35-16.75 kgha(-1)) with little importance laid on other safe control methods for the management of tea pests. Due to this practice, the tea pests showed a higher tolerance/ resistance status due to formation of greater amount of esterases, glutathione S-transferase and acetylcholinesterase. Thus, over reliance on pesticides end up with pesticide residue in made tea (DDT - 10.4-47.1%; endosulfan - 41.1-98.0%; dicofol- 0.0-82.4%; ethion - 0.0-36.2%; cypermethrin - 6.0- 45.1%). The growing concern about the pesticide residue in made tea, its toxicity hazards to consumers, the spiraling cost of pesticides and their application have necessitated a suitable planning which will ensure a safe, economic as well as effective pest management in tea. At present it is a global concern to minimize chemical residue in tea and European union and German law imposed stringent measures for the application of chemicals in tea and fixed MRL values at market at global level, central insecticide board and prevention of food adulteration regulation committee have reviewed the MRL position for tea and has recommended 10 insecticides, 5 acaricides, 9 herbicides and 5 fungicides for use in tea and issued the tea distribution and export control order 2005 which will help the country to limit the presence of undesirable substances in tea. This review attempts to provide the readers with a comprehensive account of pesticide use in North East in tea, surveillance report of the European community regarding the residue level in Assam and Darjeeling tea, recent amendments by international and national regulatory bodies, revised MRL values of pesticides in tea, an update about the current strategies for the management

Glyphosate Accumulation and Detrimental Effects on Coffea Arabica

DEFF Research Database (Denmark)

Schrübbers, Lars Christoph

and the MS/MS system provided a limit of quantification (LOQ) below 0.1 mg/kg; the commonly used maximum residue limit (MRL) for glyphosate in plant derived food products. Glyphosate was found in all samples analyzed from different coffee fields, regardless of management practices. AMPA was not detected......Coffee is one of the most popular beverages worldwide and a highly traded commodity. In order to maintain a high yield of the perennial crop, weed competition for resources needs to be reduced. For this purpose herbicides are commonly applied, with glyphosate being one of the most prominent...

Trait Mindfulness as a Limiting Factor for Residual Depressive Symptoms: An Explorative Study Using Quantile Regression

Science.gov (United States)

Radford, Sholto; Eames, Catrin; Brennan, Kate; Lambert, Gwladys; Crane, Catherine; Williams, J. Mark G.; Duggan, Danielle S.; Barnhofer, Thorsten

2014-01-01

Mindfulness has been suggested to be an important protective factor for emotional health. However, this effect might vary with regard to context. This study applied a novel statistical approach, quantile regression, in order to investigate the relation between trait mindfulness and residual depressive symptoms in individuals with a history of recurrent depression, while taking into account symptom severity and number of episodes as contextual factors. Rather than fitting to a single indicator of central tendency, quantile regression allows exploration of relations across the entire range of the response variable. Analysis of self-report data from 274 participants with a history of three or more previous episodes of depression showed that relatively higher levels of mindfulness were associated with relatively lower levels of residual depressive symptoms. This relationship was most pronounced near the upper end of the response distribution and moderated by the number of previous episodes of depression at the higher quantiles. The findings suggest that with lower levels of mindfulness, residual symptoms are less constrained and more likely to be influenced by other factors. Further, the limiting effect of mindfulness on residual symptoms is most salient in those with higher numbers of episodes. PMID:24988072

Determination of pesticide residues in animal origin baby foods by gas chromatography coupled with triple quadrupole mass spectrometry.

Science.gov (United States)

Amendola, Graziella; Pelosi, Patrizia; Attard Barbini, Danilo

2015-01-01

A simple, fast and multiresidue method for the determination of pesticide residues in baby foods of animal origin has been developed in order to check the compliance with the Maximum Residue Levels (MRLs) set at a general value of 0.01 mg/kg by Commission Directive 2006/125/EC for infant foods. The main classes of organochlorine, organophosphorus and pyrethroid compounds have been considered, which are mainly fat soluble pesticides. The analytical procedure consists in the extraction of baby food samples by acetonitrile (ACN) followed by a clean up using C18 solid-phase extraction column eluted with ACN. The compounds were determined by gas chromatography-triple quadrupole mass spectrometry equipped with a Programmed Temperature Vaporizer (PTV) injection and a backflush system. In order to compensate for matrix effects PTV and matrix matched standard calibrations have been used. The method has been fully validated for 57 pesticides according to the Document SANCO/12571/2013. Accuracy and precision (repeatability) have been studied by recoveries at two spiking levels, the Limit of Quantitation (LOQ) (0.003-0.008 mg/kg) and 10 time greater (0.03-0.08 mg/kg), and the results were in the acceptable range of 70-120% with Relative Standards Deviations (RSD) ≤20%. Selectivity, linearity, LOQ and uncertainty of measurement were also determined for all the compounds. The method has been also applied for the analysis of 18 baby food animal origin samples, bought form the local market in Rome (Italy), and no pesticide in the scope of the method has been found above the MRL or the LOQ.

Liquid chromatography-tandem mass spectrometry multiresidue method for the analysis of quaternary ammonium compounds in cheese and milk products: Development and validation using the total error approach.

Science.gov (United States)

Slimani, Kahina; Féret, Aurélie; Pirotais, Yvette; Maris, Pierre; Abjean, Jean-Pierre; Hurtaud-Pessel, Dominique

2017-09-29

Quaternary ammonium compounds (QACs) are both cationic surfactants and biocidal substances widely used as disinfectants in the food industry. A sensitive and reliable method for the analysis of benzalkonium chlorides (BACs) and dialkyldimethylammonium chlorides (DDACs) has been developed that enables the simultaneous quantitative determination of ten quaternary ammonium residues in dairy products below the provisional maximum residue level (MRL), set at 0.1mgkg -1 . To the best of our knowledge, this method could be the one applicable to milk and to three major processed milk products selected, namely processed or hard pressed cheeses, and whole milk powder. The method comprises solvent extraction using a mixture of acetonitrile and ethyl acetate, without any further clean-up. Analyses were performed by liquid chromatography coupled with electrospray tandem mass spectrometry detection (LC-ESI-MS/MS) operating in positive mode. A C18 analytical column was used for chromatographic separation, with a mobile phase composed of acetonitrile and water both containing 0.3% formic acid; and methanol in the gradient mode. Five deuterated internal standards were added to obtain the most accurate quantification. Extraction recoveries were satisfactory and no matrix effects were observed. The method was validated using the total error approach in accordance with the NF V03-110 standard in order to characterize the trueness, repeatability, intermediate precision and analytical limits within the range of 5-150μgkg -1 for all matrices. These performance criteria, calculated by e.noval ® 3.0 software, were satisfactory and in full accordance with the proposed provisional MRL and with the recommendations in the European Union SANTE/11945/2015 regulatory guidelines. The limit of detection (LOD) was low (ammoniums in foodstuffs from dairy industries at residue levels, and could be used for biocide residues monitoring plans and to measure the exposition consumer to biocides products

Long-term trend of radioactive contamination of food products in Bulgaria after the Chernobyl accident

International Nuclear Information System (INIS)

Kirov, K.; Marinov, V.; Naidenov, M.

1997-01-01

Results which characterize the dynamics for the power of radioactive contamination of foods in the Bulgaria with Cesium radionuclides from May 1986 to December 1995 are presented. It was done for motivation of some conclusions during the progress of radiation situation in Bulgaria after the Chernobyl accident. The data are compared with Maximum residues limits (MRL) of our country as well as that of international organizations. They are compared with the background contamination of foods descended from regions affected after experimental nuclear explosion till 1963 too

Evaluation and validation of a multi-residue method based on biochip technology for the simultaneous screening of six families of antibiotics in muscle and aquaculture products.

Science.gov (United States)

Gaudin, Valérie; Hedou, Celine; Soumet, Christophe; Verdon, Eric

2016-01-01

The Evidence Investigator™ system (Randox, UK) is a biochip and semi-automated system. The microarray kit II (AM II) is capable of detecting several compounds belonging to different families of antibiotics: quinolones, ceftiofur, thiamphenicol, streptomycin, tylosin and tetracyclines. The performance of this innovative system was evaluated for the detection of antibiotic residues in new matrices, in muscle of different animal species and in aquaculture products. The method was validated according to the European Decision No. EC/2002/657 and the European guideline for the validation of screening methods, which represents a complete initial validation. The false-positive rate was equal to 0% in muscle and in aquaculture products. The detection capabilities CCβ for 12 validated antibiotics (enrofloxacin, difloxacin, ceftiofur, desfuroyl ceftiofur cysteine disulfide, thiamphenicol, florfenicol, tylosin, tilmicosin, streptomycin, dihydrostreptomycin, tetracycline, doxycycline) were all lower than the respective maximum residue limits (MRLs) in muscle from different animal origins (bovine, ovine, porcine, poultry). No cross-reactions were observed with other antibiotics, neither with the six detected families nor with other families of antibiotics. The AM II kit could be applied to aquaculture products but with higher detection capabilities from those in muscle. The detection capabilities CCβ in aquaculture products were respectively at 0.25, 0.10 and 0.5 of the respective MRL in aquaculture products for enrofloxacin, tylosin and oxytetracycline. The performance of the AM II kit has been compared with other screening methods and with the performance characteristics previously determined in honey.

Effect of handling and processing on pesticide residues in food- a review.

Science.gov (United States)

Bajwa, Usha; Sandhu, Kulwant Singh

2014-02-01

Pesticides are one of the major inputs used for increasing agricultural productivity of crops. The pesticide residues, left to variable extent in the food materials after harvesting, are beyond the control of consumer and have deleterious effect on human health. The presence of pesticide residues is a major bottleneck in the international trade of food commodities. The localization of pesticides in foods varies with the nature of pesticide molecule, type and portion of food material and environmental factors. The food crops treated with pesticides invariably contain unpredictable amount of these chemicals, therefore, it becomes imperative to find out some alternatives for decontamination of foods. The washing with water or soaking in solutions of salt and some chemicals e.g. chlorine, chlorine dioxide, hydrogen peroxide, ozone, acetic acid, hydroxy peracetic acid, iprodione and detergents are reported to be highly effective in reducing the level of pesticides. Preparatory steps like peeling, trimming etc. remove the residues from outer portions. Various thermal processing treatments like pasteurization, blanching, boiling, cooking, steaming, canning, scrambling etc. have been found valuable in degradation of various pesticides depending upon the type of pesticide and length of treatment. Preservation techniques like drying or dehydration and concentration increase the pesticide content many folds due to concentration effect. Many other techniques like refining, fermentation and curing have been reported to affect the pesticide level in foods to varied extent. Milling, baking, wine making, malting and brewing resulted in lowering of pesticide residue level in the end products. Post harvest treatments and cold storage have also been found effective. Many of the decontamination techniques bring down the concentration of pesticides below MRL. However, the diminution effect depends upon the initial concentration at the time of harvest, substrate/food and type of

Effect of individual parameter changes on the outcome of the estimated short-term dietary exposure to pesticides.

Science.gov (United States)

van der Velde-Koerts, Trijntje; Breysse, Nicolas; Pattingre, Lauriane; Hamey, Paul Y; Lutze, Jason; Mahieu, Karin; Margerison, Sam; Ossendorp, Bernadette C; Reich, Hermine; Rietveld, Anton; Sarda, Xavier; Vial, Gaelle; Sieke, Christian

2018-06-03

In 2015 a scientific workshop was held in Geneva, where updating the International Estimate of Short-Term Intake (IESTI) equations was suggested. This paper studies the effects of the proposed changes in residue inputs, large portions, variability factors and unit weights on the overall short-term dietary exposure estimate. Depending on the IESTI case equation, a median increase in estimated overall exposure by a factor of 1.0-6.8 was observed when the current IESTI equations are replaced by the proposed IESTI equations. The highest increase in the estimated exposure arises from the replacement of the median residue (STMR) by the maximum residue limit (MRL) for bulked and blended commodities (case 3 equations). The change in large portion parameter does not have a significant impact on the estimated exposure. The use of large portions derived from the general population covering all age groups and bodyweights should be avoided when large portions are not expressed on an individual bodyweight basis. Replacement of the highest residue (HR) by the MRL and removal of the unit weight each increase the estimated exposure for small-, medium- and large-sized commodities (case 1, case 2a or case 2b equations). However, within the EU framework lowering of the variability factor from 7 or 5 to 3 counterbalances the effect of changes in other parameters, resulting in an estimated overall exposure change for the EU situation of a factor of 0.87-1.7 and 0.6-1.4 for IESTI case 2a and case 2b equations, respectively.

Performance of blue-yellow screening test for antimicrobial detection in ovine milk.

Science.gov (United States)

Linage, B; Gonzalo, C; Carriedo, J A; Asensio, J A; Blanco, M A; De La Fuente, L F; San Primitivo, F

2007-12-01

Drug residues in milk are important because of public health and industrial implications. The detection limits of 25 antimicrobial agents were determined by the blue-yellow screening method in ovine milk. For each drug, 8 concentrations were tested on 20 ovine milk samples from individual ewes in midlactation. Detection limits determined by means of logistic regression were below European Union maximum residue limits (EU-MRL) for penicillin G (3 to 4 microg/kg), ceftiofur (96 to 107 microg/kg), framycetin (720 to 781 microg/kg), neomycin (915 to 1,084 microg/kg), and tylosin (44 to 51 microg/kg). Detection limits for ampicillin (5 to 6 microg/kg), cloxacillin (33 to 42 microg/kg), cefoperazone (73 to 82 microg/kg), cefalexin (160 to 202 microg/kg), gentamycin (355 to 382 microg/kg), streptomycin (3,063 to 3,593 microg/kg), tilmicosin (109 to 131 microg/kg), erythromycin (444 to 522 microg/kg), spyramicin (1,106 to 1,346 microg/kg), sulfadimethoxine (101 to 119 microg/kg), sulfathiazole (122 to 151 microg/kg), sulfamethazine (309 to 328 microg/kg), sulfanilamide (1,750 to 2,674 microg/kg), tetracycline (233 to 257 microg/kg), oxytetracycline (398 to 501 microg/kg), doxycycline (323 to 419 microg/kg), chlortetracycline (3,331 to 3,989 microg/kg), danofloxacin (4.7 to 5.5 mg/kg), enrofloxacin (41 to 46 mg/kg), and flumequin (63 to 71 mg/kg) were higher than the EU-MRL. Although the blue-yellow method showed improved sensitivity compared with other tests studied in ovine milk, the performance of screening methods for detecting antimicrobial agents in milk of this species should be improved.

Diuretics, Limited Ultrafiltration, and Residual Renal Function in Incident Hemodialysis Patients: A Case Series.

Science.gov (United States)

Sjolund, Jessica; Garcia Anton, Desiree; Bayes, Liz Y; Hoekstra, Tiny; Dekker, Friedo W; Munoz Mendoza, Jair

2016-09-01

The effect of diuretics on residual renal function expressed as residual GFR (rGFR) and urine volume (rUV) using 24-hour urine collections has not been well examined in hemodialysis (HD) patients. We present a small (seven patient) but provocative case series describing a strikingly low rate of decline in rUV and rGFR (average of creatinine and urea clearances, 24-hour urine collections) in patients treated with increasing doses of furosemide (up to 360 mg/day) during the first 2 years after initiation of HD. Between 6 and 12 months, the mean rUV fell by 1 ml/month, whereas rGFR declined by 0.03 ml/min/1.73 m(2) /month. The mean rate of decline from 12 to 24 months for rUV (33 ml/month) and rGFR (0.02 ml/min/1.73 m(2) /month) were also low. While data are clearly limited and the observation retrospective, they are consistent with the better documented benefit of diuretics observed in end-stage renal disease patients treated with peritoneal dialysis. © 2016 Wiley Periodicals, Inc.

Levels of organochlorine pesticide residue in grasscutter (Thryonomys swinderianus) tissues

International Nuclear Information System (INIS)

Blankson-Arthur, S.

2009-06-01

the kidney. The level of endrin ketone was higher than endrin aldehyde in all the tissues analyzed. The mean concentration of endrin ketone was 0.347 μg /kg in the kidney. The mean concentration of α-endosulfan was 0.140μg /kg wet weight. Endosulfan sulfate was detected at 0.033 μg /kg in the kidney. The mean concentration of gamma-chlordane was 0.020 μg /kg kidney. Methoxychlor was detected at 0.183μg /kg, wet weight in the kidney. The levels of organochlorine pesticides residues detected in all the tissues were below the accepted maximum residue limits (MRL), as adopted by the WHO/FAO Codex Alimentarius Commission.

Limited post-chemotherapy retroperitoneal resection of residual tumour in non-seminomatous testicular cancer: complications, outcome and quality of life

DEFF Research Database (Denmark)

Schmidt, Anna Hartmann; Høyer, Morten; Jensen, Bent Frode Skov

2018-01-01

, complications, working ability and quality of life (QOL) following a limited surgical procedure performed to resect residual masses in non-seminomatous testicular cancer patients after chemotherapy. MATERIAL AND METHODS: A consecutive patient cohort of 109 patients having surgery between 1993 and 2013...

A green, reusable SERS film with high sensitivity for in-situ detection of thiram in apple juice

Science.gov (United States)

Sun, Hongbao; Liu, Hai; Wu, Yiyong

2017-09-01

We report a green and reusable surface-enhanced Raman scattering (SERS) film based on PMMA/Ag NPs/graphene. By using this Raman substrate, the SERS signals of R6G were significantly enhanced reaching a minimum detectable concentration of 5 × 10-8 M, due to having lots of hot spots adhered backside to the exposed graphene. The SERS film can be used for in-situ monitoring of trace thiram in apple juice with a detection limit of 1 × 10-6 M (0.24 ppm), which is below the maximal residue limit (MRL) of 7 ppm in fruit prescribed by the U.S. Environmental Protection Agency (EPA). Furthermore, reusability studies show that the SERS film can be used repeatedly. In addition, the graphene-enhanced SERS technique shows great potential applications for the in-situ detection and identification of pesticide residues in environmental water, fruits and vegetables.

9,10-Anthraquinone deposit in tea plantation might be one of the reasons for contamination in tea.

Science.gov (United States)

Wang, Xuan; Zhou, Li; Luo, Fengjian; Zhang, Xinzhong; Sun, Hezhi; Yang, Mei; Lou, Zhengyun; Chen, Zongmao

2018-04-01

9,10-Anthraquinone (AQ) was a new contaminant, with unknown sources, occurred globally in tea. European Union (EU) fixed the maximum residue limit (MRL) of 0.02mg/kg. The pollution source of AQ in tea was traced from the view of AQ deposit on tea crop by simulation. The possible contamination pathway and main factors to decrease AQ were explored in tea cultivation- tea manufacture- tea infusion, on the basis of AQ analytical methods by using solvent extraction and gas chromatography-tandem mass spectrometry (GC-MS/MS) quantification. 58.8-84.6% of AQ degraded in tea processing, and drying played a key role to reduce the AQ contamination. Certain concentration of AQ deposited on tea shoots could resulted in AQ beyond the MRL of 0.02mg/kg in tea. AQ leaching into tea brew (about 10%) could lead to the possible health risk. AQ deposit on tea crop during the tea cultivation might cause the AQ contamination in tea. Copyright © 2017. Published by Elsevier Ltd.

Investigation of the copper contents in vineyard soil, grape must and wine and the relationship among them in the Huaizhuo Basin Region, China: A preliminary study.

Science.gov (United States)

Sun, Xiangyu; Ma, Tingting; Yu, Jing; Huang, Weidong; Fang, Yulin; Zhan, Jicheng

2018-02-15

The copper contents in vineyard soil, grape must and wine and the relationship among them in the Huaizhuo Basin Region, China, were investigated. The results showed that the copper pollution status in vineyard soils, grapes and wines in the investigated area in China is under control, with only 4 surface soil (0-20cm) samples over maximum residue limits (MRL) and no grape or wine samples over MRL. Different vineyards, grape varieties, vine ages, and training systems all significantly influenced the copper contents in the vineyard soils, grape and wines. Additionally, the copper levels in the vineyard soils, grapes and wines all had some correlation. In wine samples, the copper contents ranged from 0.52 to 663μg/L, which is only approximately one percent the level found in grapes and one ten-thousandth that found in soils. Of the wine samples, red wines showed a significantly higher copper content than white wines, while in the red/white grape and soil samples, no significant differences were observed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Guidelines for selection and presentation of residue values of pesticides

NARCIS (Netherlands)

Velde-Koerts T van der; Hoeven-Arentzen PH van; Ossendorp BC; RIVM-SIR

2004-01-01

Pesticide residue assessments are executed to establish legal limits, called Maximum Residue Limits (MRLs). MRLs are derived from the results of these pesticide residue trials, which are performed according to critical Good Agricultural Practice. Only one residue value per residue trial may be

Residual stresses

International Nuclear Information System (INIS)

Sahotra, I.M.

2006-01-01

The principal effect of unloading a material strained into the plastic range is to create a permanent set (plastic deformation), which if restricted somehow, gives rise to a system of self-balancing within the same member or reaction balanced by other members of the structure., known as residual stresses. These stresses stay there as locked-in stresses, in the body or a part of it in the absence of any external loading. Residual stresses are induced during hot-rolling and welding differential cooling, cold-forming and extruding: cold straightening and spot heating, fabrication and forced fitting of components constraining the structure to a particular geometry. The areas which cool more quickly develop residual compressive stresses, while the slower cooling areas develop residual tensile stresses, and a self-balancing or reaction balanced system of residual stresses is formed. The phenomenon of residual stresses is the most challenging in its application in surface modification techniques determining endurance mechanism against fracture and fatigue failures. This paper discusses the mechanism of residual stresses, that how the residual stresses are fanned and what their behavior is under the action of external forces. Such as in the case of a circular bar under limit torque, rectangular beam under limt moment, reclaiming of shafts welds and peening etc. (author)

Risk assessment and monitoring of dinotefuran and its metabolites for Chinese consumption of apples.

Science.gov (United States)

Yu, Weiwei; Huang, Min; Chen, Jiaojiao; Wu, Sizhuo; Zheng, Kunming; Zeng, Song; Zhang, Kankan; Hu, Deyu

2017-09-26

Residues of dinotefuran and its metabolites, 1-methyl-3-(tetrahydro-3-furylmethyl)urea (UF) and 1-methyl-3-(tetrahydro-3-furylmethyl)guanidine (DN), in apple were investigated using a "QuEChERS" (quick, easy, cheap, effective, rugged, safe) pretreatment and liquid chromatography-tandem mass spectrometry. Limits of detection (LODs) and quantification (LOQs) of dinotefuran, UF, and DN in apples were 0.011-0.960 and 0.037-3.200 μg/kg, respectively. The average recoveries of dinotefuran, UF, and DN in apple ranged from 70.0 to 83.6% with relative standard deviations less than 13%. A formulation of 20% water-dispersible dinotefuran granules was sprayed at 1-1.5-fold the recommended dose 3-4 times on apple trees. Total terminal residues of dinotefuran in apple were less than 2 mg/kg, which is the maximum residue limit (MRL) set by Japan. When following the recommended application guidelines, dinotefuran is unlikely to present significant health concerns to the Chinese population because the risk quotient (RQ) is less than 100%. This work could provide guidance for the safe use of dinotefuran and serve as a reference for the establishment of a maximum residue limit of dinotefuran in apple in China.

Dissipation of Flonicamid in Honeysuckle and Its Transfer during Brewing Process.

Science.gov (United States)

Wang, Yujie; Xue, Jian; Jin, Hongyu; Ma, Shuangcheng

2017-05-01

The dissipation of flonicamid in Honeysuckle and transfer pattern from Honeysuckle to its tea infusion were investigated. Flonicamid was applied on Honeysuckle crop at two dosages, 60 g of active gradient per hectare (g a.i. hm -2 ) and 180 g a.i. hm -2 (recommended and triple the recommended) in Fenqiu, Henan Province in 2015 and 2016. Gas Chromatography-Electron Capture Detector (GC-ECD) detection methods were developed for the analysis of flonicamid residues in honeysuckles and its infusion. The recoveries in both honeysuckles and its infusion ranged from 81.5 to 101.7% with relative standard deviations (RSDs) of 3.2-9.1%. The dissipations of flonicamid in Honeysuckle were found to follow the first order kinetics with half-life ranging between 2.8 and 3.2 d. After recommended dose pesticide application, contents of flonicamid residues were lower than theoretical maximum residue limit (tMRL). Flonicamid residues can easily transfer from Honeysuckle to its tea infusion and transfer rates of flonicamid decrease with the brewing temperature reduction or the brewing times increase. These results are helpful to establish maximum residue limit and develop guidance on the appropriate and secure use of flonicamid in Honeysuckle.

Magnitude of cyantraniliprole residues in tomato following open field application: pre-harvest interval determination and risk assessment.

Science.gov (United States)

Malhat, Farag; Kasiotis, Konstantinos M; Shalaby, Shehata

2018-02-05

Cyantraniliprole is an anthranilic diamide insecticide, belonging to the ryanoid class, with a broad range of applications against several pests. In the presented work, a reliable analytical technique employing high-performance liquid chromatography coupled with photodiode array detector (HPLC-DAD) for analyzing cyantraniliprole residues in tomato was developed. The method was then applied to field-incurred tomato samples collected after applications under open field conditions. The latter aimed to ensure the safe application of cyantraniliprole to tomato and contribute the derived residue data to the risk assessment under field conditions. Sample preparation involved a single step extraction with acetonitrile and sodium chloride for partitioning. The extract was purified utilizing florisil as cleanup reagent. The developed method was further evaluated by comparing the analytical results with those obtained using the QuEChERS technique. The novel method outbalanced QuEChERS regarding matrix interferences in the analysis, while it met all guideline criteria. Hence, it showed excellent linearity over the assayed concentration and yielded satisfactory recovery rate in the range of 88.9 to 96.5%. The half-life of degradation of cyantraniliprole was determined at 2.6 days. Based on the Codex MRL, the pre-harvest interval (PHI) for cyantraniliprole on tomato was 3 days, after treatment at the recommended dose. To our knowledge, the present work provides the first record on PHI determination of cyantraniliprole in tomato under open field conditions in Egypt and the broad Mediterranean region.

6-Iso-chlortetracycline or keto form of chlortetracycline? Need for clarification for relevant monitoring of chlortetracycline residues in food.

Science.gov (United States)

Gaugain, Murielle; Gautier, Sophie; Bourcier, Sophie; Jacques, Anne-Marie; Laurentie, Michel; Abjean, Jean-Pierre; Hurtaud-Pessel, Dominique; Verdon, Eric

2015-01-01

Chlortetracycline (CTC) is a broad-spectrum antibiotic used in veterinary medicine for pulmonary or digestive infections and having a regulatory maximum residue limit (MRL) necessitating an official analytical control method. The purpose of this study was to clarify the identification of different forms of CTC observed in standard solution, in spiked muscle samples and in naturally incurred muscle samples of pigs analysed by LC-MS/MS and to demonstrate the in vivo formation of 6-iso-chlortetracycline and 4-epi-6-iso-CTC as a metabolite of CTC and 4-epi-CTC in muscle. The six following forms were identified, all being isobaric with a protonated molecule at m/z 479 (precursor ion): the keto-enol forms of CTC and the keto-enol forms of 4-epi-chlortetracycline (4-epi-CTC), 6-iso-chlortetracycline (6-iso-CTC) and 4-epi-6-iso-chlortetracycline (4-epi-6-iso-CTC). The 6-iso-CTC and 4-epi-6-iso-CTC were observed only in incurred pig samples so were identified for the first time as metabolites of CTC and 4-epi-CTC. Identification of the different forms was obtained by comparing incurred muscle samples with standard solutions and with spiked samples. Then the differences between the features of the chromatograms obtained by LC-TQ-MS and the fragmentation study of the different forms of CTC obtained by LC-Q-TOF-MS helped us to support this identification. The extraction steps and the LC-MS/MS conditions developed to analyse muscle tissue samples are described. This clarification concerning the rigorous identification of chromatographic peaks allowed us to evaluate the relevance of our monitoring method with regard to the regulations in place in the European Union and could be of help to laboratories involved in official control of antibiotic residues in food of animal origin. Additional results are also presented highlighting the transformation of the CTC when prepared in a mixture with other antibiotics.

Cytotoxic effects of oxytetracycline residues in the bones of broiler chickens following therapeutic oral administration of a water formulation.

Science.gov (United States)

Odore, R; De Marco, M; Gasco, L; Rotolo, L; Meucci, V; Palatucci, A T; Rubino, V; Ruggiero, G; Canello, S; Guidetti, G; Centenaro, S; Quarantelli, A; Terrazzano, G; Schiavone, A

2015-08-01

Tetracyclines, which represent one of the most commonly used antibiotics for poultry, are known to be deposited in bones, where they can remain, despite the observation of appropriate withdrawal times. The aim of the study was to determine the concentration of oxytretracycline (OTC) residues in the bone and muscle of chickens, following the oral administration of a commercially available liquid formulation, and to test their cytotoxic effects on an in vitro cell culture model. Seventy-two 1-day-old broiler chickens were randomly allotted into 2 groups (control and treated animals). OTC (40 mg/kg BW) was administered via drinking water during the 1 to 5 and 20 to 25 days of life periods. At the end of the trial, the birds were slaughtered and the OTC residues in the target tissues were measured by means of liquid chromatography (LC) - tandem mass spectrometry (MS/MS). Cytotoxicity was assessed by evaluating the pro-apoptotic effect of the bone residues on the K562 erythroleukemic line and on the peripheral blood mononuclear cells (PBMC). In all the animals, the OTC residues in the muscle were far below the established MRL of 100 μg/kg. The OTC levels in the bones of the treated animals were instead found in the parts per million (ppm) range. Cell cytotoxicity was assessed by evaluating the pro-apoptotic effect of OTC bone residues on the haematopoietic cell system. This in vitro system has revealed a significant pro-apoptotic effect on both the K562 cell line and PBMC cultures. This result suggests potential human and animal health risks due to the entry of tetracycline residues contained in the bones of treated livestock into the food-chain. This could be of concern, particularly for canine and feline diets, as meat, bone meal, and poultry by-products represent some of the main ingredients of pet foods, especially in the case of dry pet food. Further studies are needed to define the underlying mechanisms of cytotoxicity and to evaluate the in vivo toxicological

Focus on agricultural residues: Microstructure of almond hull (abstract)

Science.gov (United States)

Agricultural residues have historically been used as animal feed or burned for disposal. These residues, therefore, have little economic value and may end up becoming disposal problems because tighter air quality control measures may limit burning of the residues. Therefore, value-added products mad...

Dissipation of pyraclostrobin and its metabolite BF-500-3 in maize under field conditions.

Science.gov (United States)

You, Xiangwei; Liu, Congyun; Liu, Fengmao; Liu, Yanping; Dong, Jiannan

2012-06-01

The dissipation and residue of pyraclostrobin and its metabolite BF-500-3 in maize under field conditions were investigated. A sensitive, simple and fast method for simultaneous determination of pyraclostrobin and BF-500-3 in maize matrix was established by high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The average recoveries of pyraclostrobin and BF-500-3 were found in the range of 83.6-104.9% with relative standard deviations (RSDs) of 2.3-10.0%. The results showed that pyraclostrobin dissipated quickly in maize plant with half-lives of 1.6-1.7 days. Its metabolite BF-500-3 showed a tendency of rapid increasing initially and decreasing afterwards. At harvest time, the terminal residues of pyraclostrobin were below the maximum residue limit (MRL) set by USA and Canada in maize grain when measured 7 days after the final application, which suggested that the use of this fungicide was safe for humans. The results could provide guidance to safe and reasonable use of pyraclostrobin in agriculture. Copyright © 2012 Elsevier Inc. All rights reserved.

Investigation of the herbicide glyphosate and the plant growth regulators chlormequat and mepiquat in cereals produced in Denmark

DEFF Research Database (Denmark)

Granby, Kit; Gabrielsen, Martin Vahl

2001-01-01

An LC-MS/ MS method for analysing glyphosate and aminomethylphosphonic acid (AMPA) in cereals was developed. The method is based on extraction with water and detection of the ions from the fragmentation m/z 170 --> 88 (glyphosate) and m/z 112 --> 30 (AMPA), using electrospray interface in the pos......An LC-MS/ MS method for analysing glyphosate and aminomethylphosphonic acid (AMPA) in cereals was developed. The method is based on extraction with water and detection of the ions from the fragmentation m/z 170 --> 88 (glyphosate) and m/z 112 --> 30 (AMPA), using electrospray interface....../kg for the 1998 harvest (n=49). Thus, the figures were well below the maximum residue limit (MRL) and no violations were observed. The plant growth regulators chlormequat and/or mepiquat were investigated in cereals from the Danish harvest of 1999 where 83% of the samples contained chlormequat (n=46) compared...... with 87% of the samples from the 1997 harvest (n=52). The average concentration of chlormequat in 1999 was 0.32 mg/kg compared with 0.23 mg/kg in 1997. At 2.9 mg/kg, one sample of wheat bran was exceeding the MRL of 2 mg/kg for wheat. The intakes of the pesticides through the diet of cereals were...

Repeated 0.5 Gy gamma-ray irradiation attenuates autoimmune disease in MRL-lpr/lpr mice with up-regulation of regulatory T cells

International Nuclear Information System (INIS)

Mitsutoshi Tsukimoto; Fumitoshi Tago; Hiroko Nakatsukasa; Shuji Kojima

2007-01-01

Complete text of publication follows. MRL-lpr/lpr mice present a single gene mutation on the Fas (CD95) gene that leads to reduced signaling for apoptosis. With aging, these mice spontaneously develop autoimmune disease and are used as a model of systemic lupus erythematosus. We previously reported attenuation of autoimmune disease in MRL-lpr/lpr mice by repeated γ-ray irradiation (0.5 Gy each time). In this study, we investigated the mechanisms of this attenuation focusing the highly activated CD3 + CD4 - CD8 - B220 + T cells, which are characteristically involved in autoimmune pathology in these mice. We measured the weight of the spleen and the population of CD3 + CD4 - CD8 - B220 + T cells. Splenomegaly and increase in percentage of CD3 + CD4 - CD8 - B220 + T cells, which occur with aging in non-irradiated mice, were suppressed in irradiated mice. To investigate the function of CD3 + CD4 - CD8 - B220 + T cells, we isolated these cells from splenocytes by magnetic cell sorting. Isolated CD3 + CD4 - CD8 - B220 + T cells were more resistant to irradiation-induced cell death than isolated CD4 + T cells. Although high proliferation rate and IL-6 production were observed in isolated CD3 + CD4 - CD8 - B220 + T cells, the proliferation rate and IL-6 production were lower in the cells isolated from the irradiated mice. Moreover, the production of autoantibodies (anti-collagen antibody and anti-single strand DNA antibody) was also lowered by irradiation. These results indicate that activation of CD3 + CD4 - CD8 - B220 + T cells and progression of pathology would be suppressed by repeated 0.5 Gy γ-ray irradiation. To uncover the mechanism of the immune suppression, we analyzed population of regulatory T cells (CD4 + CD25 + Foxp3 + ), which suppress activated T cells and excessive autoimmune responses. Intriguingly, significant increase of the percentage of regulatory T cells was observed in irradiated mice. In conclusion, we found that repeated 0.5 Gy γ-ray irradiation

Development and validation of a confirmatory method for the determination of 12 non steroidal anti-inflammatory drugs in milk using liquid chromatography-tandem mass spectrometry.

Science.gov (United States)

Dubreil-Chéneau, Estelle; Pirotais, Yvette; Bessiral, Mélaine; Roudaut, Brigitte; Verdon, Eric

2011-09-16

A rapid and reliable LC-MS/MS method for the simultaneous confirmation of twelve non steroidal anti-inflammatory drugs (NSAIDs) in bovine milk was developed and fully validated in accordance with the European Commission Decision 2002/657/EC. The validation scheme was built in accordance with the MRLs or target analytical levels (EU-CRL recommended concentrations and detection capabilities) of the analytes, except for diclofenac for which the lower level of validation achieved was 0.5 μg kg(-1) whereas its MRL is 0.1 μg kg(-1). The NSAIDs investigated were as follows: phenylbutazone (PBZ), oxyphenylbutazone (OPB), naproxen (NP), mefenamic acid (MF), vedaprofen (VDP), flunixin (FLU), 5-hydroxyflunixin (FLU-OH), tolfenamic acid (TLF), meloxicam (MLX), diclofenac (DC), carprofen (CPF) and ketoprofen (KTP). Several extraction procedures had been investigated during the development phase. Finally, the best results were obtained with a procedure using only methanol as the extraction solvent, with an evaporation step included and no further purification. Chromatographic separation was achieved on a C18 analytical column and the run was split in 2 segments. Matrix effects were also investigated. Data acquisition implemented for the confirmatory purpose was performed by monitoring 2 MRM transitions per analyte under the negative electrospray mode. Mean relative recoveries ranged from 94.7% to 110.0%, with their coefficients of variation lying between 2.9% and 14.7%. Analytical limits expressed in terms of decision limits (CCα) were evaluated between 0.69 μg kg(-1) (FLU) and 27.54 μg kg(-1) (VDP) for non-MRL compounds, and at 0.10 (DC), 15.37 (MLX), 45.08 (FLU-OH), and 62.96 μg kg(-1) (TLF) for MRL compounds. The validation results proved that the method is suitable for the screening and confirmatory steps as implemented for the French monitoring plan for NSAID residue control in bovine milk. Copyright © 2011 Elsevier B.V. All rights reserved.

Effect of the perfluorodecalin residue on macular subretinal treated by internal limiting membrane peeling combined with 38G casing needle

Directory of Open Access Journals (Sweden)

Xiao-Bo Wang

2014-11-01

Full Text Available AIM: To observe the effect of the treatment to the perfluorodecalin residue on macular subretinal by internal limiting membrane(ILMpeeling combined with 38G casing needle.METHODS: Twenty-nine cases(29 eyesof retinal reattachment and with perfluorodecalin residual on the macular subretinal, selected in Xiamen Eye Center from January 2008 to October 2013, were divided into group A(14 cases, 14 eyesand group B(15 cases, 15 eyesrandomly. In group A, after removal of silicone oil, perfluorodecalin liquids at the macular subretinal directly were aspirated by 38G casing needle. In group B, after removal of silicone oil, ILM was dyed and peeled completely to the range of 4PD approximately. Then the perfluorodecalin liquids at the macular subretinal were aspirated by 38G casing needle. All cases of both groups were filled with filtered air. After 1wk, the case with macular hole found by OCT was exchanged by air-fluid and filled with 16% C3F8. The best corrected visual acuity(BCVAof two groups of patients was observed after 4, 8, 24wk. OCT was reviewed to observe whether there were perfluorodecalin residue on the macular subretinal, formation of macular hole and macular morphological changes, retinal detachment.RESULTS: BCVA was improved in both groups after 4, 8, 24wk. And the value of BCVA improvedin group B was better than that in group A(PCONCLUSION: ILM peeling combined with 38G casing needle can aspirate completely the perfluorodecalin residual on macular. There were not caused macular hole and retinal detachment. This method is an safe, effective and minimally invasive surgical technique to protect the macular function.

comparative assessment residual soils in residual soils in parts of e

African Journals Online (AJOL)

eobe

residual soil formed from Zuma rock. The Zuma r is an igneous .... The liquid limit (LL) is the lowest water content above which soil .... where this effect begins to be counteracted by the saturation of the ... retaining walls, tunnel linings and timbering of excavation. .... event of pore pressure build up due to excessive moisture.

Silver Nanopartical over AuFON Substrate for Enhanced Raman Readout and Their Application in Pesticide Monitoring

Directory of Open Access Journals (Sweden)

Kun Guo

2015-04-01

Full Text Available Surface-enhanced Raman detection of thiram is demonstrated by using Ag-nanoparticles (Ag NPs on Au film over nanosphere (AuFON substrate as the hybrid substrate. The SERS signal of the Ag NPs attached to solid supports is studied. The close coupling together of thousands of Ag NPs on AuFON leads to the generation of hot spots for SERS. The Ag NPs on AuFON can be applied to detect rhodamine-6G (R6G with the detection limitation of 10−11 M and the pesticide thiram in acetone with a detection limit of as low as 0.24 ppm, which is much lower than the maximal residue limit (MRL of 7 ppm in fruit prescribed by the U.S. Environmental Protection Agency (EPA. The hybrid substrates are shown to be highly sensitive for the detection of thriam, which produce highly enhanced Raman signals with good uniformity and reproducibility due to having plenty of hot spots on its surface.

Corn residue utilization by livestock in the USA

Science.gov (United States)

Corn (Zea mays L.) residue grazing or harvest provides a simple and economical practice to integrate crops and livestock. Limited information is available on how widespread corn residue utilization is practiced by US producers. In 2010, the USDA-ERS surveyed producers from 19 states on corn grain ...

Soil thresholds and a decision tool to manage food safety of crops grown in chlordecone polluted soil in the French West Indies.

Science.gov (United States)

Clostre, Florence; Letourmy, Philippe; Lesueur-Jannoyer, Magalie

2017-04-01

Due to the persistent pollution of soils by an organochlorine, chlordecone (CLD also known as Kepone © ) in the French West Indies, some crops may be contaminated beyond the European regulatory threshold, the maximum residue limit (MRL). Farmers need to be able to foresee the risk of not complying with the regulatory threshold in each field and for each crop, if not, farmers whose fields are contaminated would have to stop cultivating certain crops in the fields concerned. To help farmers make the right choices, we studied the relationship between contamination of the soil and contamination of crops. We showed that contamination of a crop by CLD depended on the crop concerned, the soil CLD content and the type of soil. We grouped crop products in three categories: (i) non-uptakers and low-uptakers, (ii) medium-uptakers, and (iii) high-uptakers, according to their level of contamination and the resulting risk of exceeding MRL. Using a simulation model, we computed the soil threshold required to ensure the risk of not complying with MRL was sufficiently low for each crop product and soil type. Threshold values ranged from 0.02 μgkg -1 for dasheen grown in nitisol to 1.7 μgkg -1 for yam grown in andosol in the high-uptake category, and from 1 μgkg -1 for lettuce grown in nitisol to 45 μgkg -1 for the leaves of spring onions grown in andosol in the medium-uptake category. Contamination of non-uptakers and low-uptakers did not depend on soil contamination. With these results, we built an easy-to-use decision support tool based on two soil thresholds (0.1 and 1 μgkg -1 ) to enable growers to adapt their cropping system and hence to be able to continue farming. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluation of heavy metals in hazardous automobile shredder residue thermal residue and immobilization with novel nano-size calcium dispersed reagent

International Nuclear Information System (INIS)

Lee, Chi-Hyeon; Truc, Nguyen Thi Thanh; Lee, Byeong-Kyu; Mitoma, Yoshiharu; Mallampati, Srinivasa Reddy

2015-01-01

Graphical abstract: Schematic representation of possible mechanisms determining the heavy metals immobilization efficiencyof ASR dust/thermal residues after treatment with nanometallic Ca/CaO/PO 4 . - Highlights: • Nanometallic Ca/CaO/PO 4 for heavy metals immobilization in ASR residue. • Heavy metals immobilization in dry condition attained about 95–100%. • Remaining heavy metals were lower than the Korean standard regulatory limit. • The amounts of heavy metals detectable on the ASR dust surface decreased. • Nanometallic Ca/CaO/PO 4 has a promising potential for heavy metal remediation. - Abstract: This study was conducted to synthesize and apply a nano-size calcium dispersed reagent as an immobilization material for heavy metal-contaminated automobile shredder residues (ASR) dust/thermal residues in dry condition. Simple mixing with a nanometallic Ca/CaO/PO 4 dispersion mixture immobilized 95–100% of heavy metals in ASR dust/thermal residues (including bottom ash, cavity ash, boiler and bag filter ash). The quantity of heavy metals leached from thermal residues after treatment by nanometallic Ca/CaO/PO 4 was lower than the Korean standard regulatory limit for hazardous waste landfills. The morphology and elemental composition of the nanometallic Ca/CaO-treated ASR residue were characterized by field emission scanning election microscopy combined with electron dispersive spectroscopy (FE-SEM/EDS). The results indicated that the amounts of heavy metals detectable on the ASR thermal residue surface decreased and the Ca/PO 4 mass percent increased. X-ray diffraction (XRD) pattern analysis indicated that the main fraction of enclosed/bound materials on ASR residue included Ca/PO 4 − associated crystalline complexes, and that immobile Ca/PO 4 salts remarkably inhibited the desorption of heavy metals from ASR residues. These results support the potential use of nanometallic Ca/CaO/PO 4 as a simple, suitable and highly efficient material for the gentle

Evaluation of heavy metals in hazardous automobile shredder residue thermal residue and immobilization with novel nano-size calcium dispersed reagent

Energy Technology Data Exchange (ETDEWEB)

Lee, Chi-Hyeon; Truc, Nguyen Thi Thanh [Department of Civil and Environmental Engineering, University of Ulsan, Daehak-ro 93, Nam-gu, Ulsan 680-749 (Korea, Republic of); Lee, Byeong-Kyu, E-mail: bklee@ulsan.ac.kr [Department of Civil and Environmental Engineering, University of Ulsan, Daehak-ro 93, Nam-gu, Ulsan 680-749 (Korea, Republic of); Mitoma, Yoshiharu [Department of Environmental Sciences, Prefectural University of Hiroshima, 562 Nanatsuka-Cho Shobara City, Hiroshima 727-0023 (Japan); Mallampati, Srinivasa Reddy, E-mail: srireddys@ulsan.ac.kr [Department of Civil and Environmental Engineering, University of Ulsan, Daehak-ro 93, Nam-gu, Ulsan 680-749 (Korea, Republic of)

2015-10-15

Graphical abstract: Schematic representation of possible mechanisms determining the heavy metals immobilization efficiencyof ASR dust/thermal residues after treatment with nanometallic Ca/CaO/PO{sub 4}. - Highlights: • Nanometallic Ca/CaO/PO{sub 4} for heavy metals immobilization in ASR residue. • Heavy metals immobilization in dry condition attained about 95–100%. • Remaining heavy metals were lower than the Korean standard regulatory limit. • The amounts of heavy metals detectable on the ASR dust surface decreased. • Nanometallic Ca/CaO/PO{sub 4} has a promising potential for heavy metal remediation. - Abstract: This study was conducted to synthesize and apply a nano-size calcium dispersed reagent as an immobilization material for heavy metal-contaminated automobile shredder residues (ASR) dust/thermal residues in dry condition. Simple mixing with a nanometallic Ca/CaO/PO{sub 4} dispersion mixture immobilized 95–100% of heavy metals in ASR dust/thermal residues (including bottom ash, cavity ash, boiler and bag filter ash). The quantity of heavy metals leached from thermal residues after treatment by nanometallic Ca/CaO/PO{sub 4} was lower than the Korean standard regulatory limit for hazardous waste landfills. The morphology and elemental composition of the nanometallic Ca/CaO-treated ASR residue were characterized by field emission scanning election microscopy combined with electron dispersive spectroscopy (FE-SEM/EDS). The results indicated that the amounts of heavy metals detectable on the ASR thermal residue surface decreased and the Ca/PO{sub 4} mass percent increased. X-ray diffraction (XRD) pattern analysis indicated that the main fraction of enclosed/bound materials on ASR residue included Ca/PO{sub 4}− associated crystalline complexes, and that immobile Ca/PO{sub 4} salts remarkably inhibited the desorption of heavy metals from ASR residues. These results support the potential use of nanometallic Ca/CaO/PO{sub 4} as a simple, suitable and

Paradoxical effects of all-trans-retinoic acid on lupus-like disease in the MRL/lpr mouse model.

Directory of Open Access Journals (Sweden)

Xiaofeng Liao

Full Text Available Roles of all-trans-retinoic acid (tRA, a metabolite of vitamin A (VA, in both tolerogenic and immunogenic responses are documented. However, how tRA affects the development of systemic autoimmunity is poorly understood. Here we demonstrate that tRA have paradoxical effects on the development of autoimmune lupus in the MRL/lpr mouse model. We administered, orally, tRA or VA mixed with 10% of tRA (referred to as VARA to female mice starting from 6 weeks of age. At this age, the mice do not exhibit overt clinical signs of lupus. However, the immunogenic environment preceding disease onset has been established as evidenced by an increase of total IgM/IgG in the plasma and expansion of lymphocytes and dendritic cells in secondary lymphoid organs. After 8 weeks of tRA, but not VARA treatment, significantly higher pathological scores in the skin, brain and lung were observed. These were accompanied by a marked increase in B-cell responses that included autoantibody production and enhanced expression of plasma cell-promoting cytokines. Paradoxically, the number of lymphocytes in the mesenteric lymph node decreased with tRA that led to significantly reduced lymphadenopathy. In addition, tRA differentially affected renal pathology, increasing leukocyte infiltration of renal tubulointerstitium while restoring the size of glomeruli in the kidney cortex. In contrast, minimal induction of inflammation with tRA in the absence of an immunogenic environment in the control mice was observed. Altogether, our results suggest that under a predisposed immunogenic environment in autoimmune lupus, tRA may decrease inflammation in some organs while generating more severe disease in others.

Identification and quantification of five macrolide antibiotics in several tissues, eggs and milk by liquid chromatography-electrospray tandem mass spectrometry.

Science.gov (United States)

Dubois, M; Fluchard, D; Sior, E; Delahaut, P

2001-04-05

We present an electrospray high-performance liquid chromatographic tandem mass spectrometric (HPLC-MS-MS) method capable of determining in several tissues (muscle, kidney, liver), eggs and milk the following five macrolides: tylosin, tilmicosin, spiramycin, josamycin, erythromycin. Roxithromycin was used as an internal standard. The method uses extraction in a Tris buffer at pH 10.5, followed by protein precipitation with sodium tungstate and clean-up on an Oasis solid-phase extraction column. The HPLC separation was performed on a Purospher C18 column (125 x 3 mm I.D.) protected by a guard column, with a gradient of aqueous 0.1 M ammonium acetate-acetonitrile as the mobile phase at a flow-rate of 0.7 ml min(-1). Protonated molecules served as precursor ions for electrospray ionisation in the positive ion mode and four product ions were chosen for each analyte for multiple reaction monitoring (MRM). A validation study was conducted to confirm the five macrolides by MRM HPLC-MS-MS analysis of a negative control and fortified samples. All of the samples analysed were confirmed with four ions. The ion ratio reproducibility limit ranged from 2.4 to 15%. All compounds could be detected and quantified at half-maximum residue limits (MRLs). The method is specific, quantitative and reproducible enough to conform to European Union recommendations within the concentration range 0.5 MRL-2 MRL (accuracy: 80 to 110%, relative standard deviation: 2 to 13%). This whole method allows extraction and analysis of up to 50 samples per day.

Resolution of a disputed albendazole result in the UK Official Control System - time for more guidance?

Science.gov (United States)

Walker, Michael; Gray, Kirstin; Hopley, Christopher; Mussell, Christopher; Clifford, Louise; Meinerikandathevan, Jayanie; Firpo, Leonardo; Topping, Joanna; Santacruz, Daniel

2017-04-01

Albendazole, one of the benzimidazole anthelmintics, is used in ruminants and has maximum residue limits in muscle, fat and other tissue owing to reported teratogenicity. Albendazole is extensively metabolised in domestic animals and humans with rapid conversion to a sulphoxide and subsequently sulphone and amino sulphone metabolites. Sulphoxide metabolites are responsible for the systemic biological activity of benzimidazole drugs. Herein we report a case of disputed results for albendazole in a consignment sampled at import in which the Official Analyst certified against the consignment for excess albendazole. A laboratory acting for the importer reported data below the MRL, including a finding of the parent drug which is not included in the residue definition. The Government Chemist has a statutory duty as a route of technical appeal in the UK Official Food Control system and the case was referred for referee analysis. We report our findings based on a LC-MS/MS method, which confirmed the official findings, did not reveal the presence of the parent drug but identified hot spots of albendazole marker residues in the consignment. We discuss the need for recommendations on official sampling at import and interpretation of results.

Kinetic study of the degradation of the insecticide pymetrozine in a vegetable-field ecosystem

International Nuclear Information System (INIS)

Shen Guoqing; Hu Xuan; Hu Yinan

2009-01-01

The disappearance kinetics of pymetrozine was studied in a broccoli-field ecosystem, and an efficient method for the determination of pymetrozine in broccoli and soil was also developed. Pymetrozine residues were extracted from samples using acetonitrile. The extracts were cleaned up by liquid-liquid partitioning with dichloromethane, followed by purification with ethyl acetate, and were then determined by high-performance liquid chromatography (HPLC) with ultraviolet (UV) detector. The average recovery was 87-93% from broccoli, and 84-90% from soil. The relative standard deviation (R.S.D.) was less than 4% in broccoli, and in soil less than 11%. These results are all within the accepted range for residue determination. The limit of detection (LOD) of pymetrozine calculated as a sample concentration (S/N ratio of 3) was 0.005 mg kg -1 . The minimum detectable quantity (MDQ) was 1 x 10 -10 g. The results of the kinetics study of pymetrozine residue showed that pymetrozine degradation in broccoli and soil coincided, with C = 1.9826 e -0.1965t and C = 15.352 e -0.4992t , respectively; the half-lives were 3.5 and 1.4 days, respectively. The final residue level was lower than the new maximum residue limit (MRL) for pymetrozine on vegetables with a harvest interval of 23 days. A dosage of 300 g a.i. hm -2 was suggested, which is considered to be safe for human beings. These results contribute to establishing the scientific basis of the dosage of pymetrozine for use in vegetable-field ecosystems.

Residual nilpotence and residual solubility of groups

International Nuclear Information System (INIS)

Mikhailov, R V

2005-01-01

The properties of the residual nilpotence and the residual solubility of groups are studied. The main objects under investigation are the class of residually nilpotent groups such that each central extension of these groups is also residually nilpotent and the class of residually soluble groups such that each Abelian extension of these groups is residually soluble. Various examples of groups not belonging to these classes are constructed by homological methods and methods of the theory of modules over group rings. Several applications of the theory under consideration are presented and problems concerning the residual nilpotence of one-relator groups are considered.

Toxicological studies for adults and children of insecticide residues with common mode of action (MoA) in pome, stone, berries and other small fruit

International Nuclear Information System (INIS)

Lozowicka, B.; Mojsak, P.; Jankowska, M.; Kaczynski, P.; Hrynko, I.; Rutkowska, E.; Szabunko, J.; Borusiewicz, A.

2016-01-01

The presence of pesticide residues in fruit is a serious health concern. This paper for the first time demonstrated the Hazard Index (HI) method to carry out acute, chronic and cumulative health risk assessment to the 14 groups of insecticides for three subpopulations. The challenge of this study was to present results from a long period of research (years 2005–2014) with toxicological aspects, especially in multiresidue samples. Near 1000 fresh pome, stone, berries and small fruit were prepared by two accredited MSPD and QuEChERS methods followed by liquid and gas chromatography analyses with various systems of detection ECD/NPD/MS/MS. Twenty percent of the fruit samples contained 16 insecticide residues in the range of 0.01–0.81 mg/kg and 3% over MRL. The class of pesticide with the highest contribution to the ADI was found to be OPPs: dimethoate and diazinon for adults 48% and 66% of the ADI whereas for infants 144% and 294% of the ADI. The highest contributions of the cHQ to common MoA pesticides were AChE inhibitors: 135% for adults and 528% for infants, sodium channel modulators 4.9% and 20%, nicotic acetylocholine receptor < 2.9% and < 10.6% for adults and infants, respectively. The fruit with the highest contribution to the ADI were found to be apples (316%, 58%), cherries (96%, 37%) and pears (129%, 33%) for infants and adults. The study findings indicated that dietary exposures to insecticide residues in fruit would be unlikely to pose unacceptable health risks for the infants, toddlers and adults. - Highlights: • Health risk assessment of insecticide via dietary intake of fruit was estimated. • Sixteen residues in pome, stone, berries and small fruit ranged from 0.01 to 0.8 mg/kg. • Organophosphates were the most frequently occurring group with common MoA. • Dietary exposures for adults and children were below the safety reference values. • Toxicological study provided important date of human health.

Toxicological studies for adults and children of insecticide residues with common mode of action (MoA) in pome, stone, berries and other small fruit

Energy Technology Data Exchange (ETDEWEB)

Lozowicka, B., E-mail: B.Lozowicka@iorpib.poznan.pl [Plant Protection Institute - National Research Institute, Laboratory of Pesticide Residues, Chelmonskiego 22, 15-195 Bialystok (Poland); Mojsak, P.; Jankowska, M.; Kaczynski, P.; Hrynko, I.; Rutkowska, E.; Szabunko, J. [Plant Protection Institute - National Research Institute, Laboratory of Pesticide Residues, Chelmonskiego 22, 15-195 Bialystok (Poland); Borusiewicz, A. [Department of Agronomy, The Academy of Agrobusiness in Łomza (Poland)

2016-10-01

The presence of pesticide residues in fruit is a serious health concern. This paper for the first time demonstrated the Hazard Index (HI) method to carry out acute, chronic and cumulative health risk assessment to the 14 groups of insecticides for three subpopulations. The challenge of this study was to present results from a long period of research (years 2005–2014) with toxicological aspects, especially in multiresidue samples. Near 1000 fresh pome, stone, berries and small fruit were prepared by two accredited MSPD and QuEChERS methods followed by liquid and gas chromatography analyses with various systems of detection ECD/NPD/MS/MS. Twenty percent of the fruit samples contained 16 insecticide residues in the range of 0.01–0.81 mg/kg and 3% over MRL. The class of pesticide with the highest contribution to the ADI was found to be OPPs: dimethoate and diazinon for adults 48% and 66% of the ADI whereas for infants 144% and 294% of the ADI. The highest contributions of the cHQ to common MoA pesticides were AChE inhibitors: 135% for adults and 528% for infants, sodium channel modulators 4.9% and 20%, nicotic acetylocholine receptor < 2.9% and < 10.6% for adults and infants, respectively. The fruit with the highest contribution to the ADI were found to be apples (316%, 58%), cherries (96%, 37%) and pears (129%, 33%) for infants and adults. The study findings indicated that dietary exposures to insecticide residues in fruit would be unlikely to pose unacceptable health risks for the infants, toddlers and adults. - Highlights: • Health risk assessment of insecticide via dietary intake of fruit was estimated. • Sixteen residues in pome, stone, berries and small fruit ranged from 0.01 to 0.8 mg/kg. • Organophosphates were the most frequently occurring group with common MoA. • Dietary exposures for adults and children were below the safety reference values. • Toxicological study provided important date of human health.

Corn Residue Use by Livestock in the United States

Directory of Open Access Journals (Sweden)

Marty R. Schmer

2017-01-01

Full Text Available Corn ( L. residue grazing or harvest provides a simple and economical practice to integrate crops and livestock, but limited information is available on how widespread corn residue utilization is practiced by US producers. In 2010, the USDA Economic Research Service surveyed producers from 19 states on corn grain and residue management practices. Total corn residue grazed or harvested was 4.87 million ha. Approximately 4.06 million ha was grazed by 11.7 million livestock (primarily cattle in 2010. The majority of grazed corn residue occurred in Nebraska (1.91 million ha, Iowa (385,000 ha, South Dakota (361,000 ha, and Kansas (344,000 ha. Average grazing days ranged from 10 to 73 d (mean = 40 d. Corn residue harvests predominantly occurred in the central and northern Corn Belt, with an estimated 2.9 Tg of corn residue harvested across the 19 states. This survey highlights the importance of corn residue for US livestock, particularly in the western Corn Belt.

Limits to biofuels

Directory of Open Access Journals (Sweden)

Johansson S.

2013-06-01

Full Text Available Biofuel production is dependent upon agriculture and forestry systems, and the expectations of future biofuel potential are high. A study of the global food production and biofuel production from edible crops implies that biofuel produced from edible parts of crops lead to a global deficit of food. This is rather well known, which is why there is a strong urge to develop biofuel systems that make use of residues or products from forest to eliminate competition with food production. However, biofuel from agro-residues still depend upon the crop production system, and there are many parameters to deal with in order to investigate the sustainability of biofuel production. There is a theoretical limit to how much biofuel can be achieved globally from agro-residues and this amounts to approximately one third of todays’ use of fossil fuels in the transport sector. In reality this theoretical potential may be eliminated by the energy use in the biomass-conversion technologies and production systems, depending on what type of assessment method is used. By surveying existing studies on biofuel conversion the theoretical limit of biofuels from 2010 years’ agricultural production was found to be either non-existent due to energy consumption in the conversion process, or up to 2–6000TWh (biogas from residues and waste and ethanol from woody biomass in the more optimistic cases.

Limits to biofuels

Science.gov (United States)

Johansson, S.

2013-06-01

Biofuel production is dependent upon agriculture and forestry systems, and the expectations of future biofuel potential are high. A study of the global food production and biofuel production from edible crops implies that biofuel produced from edible parts of crops lead to a global deficit of food. This is rather well known, which is why there is a strong urge to develop biofuel systems that make use of residues or products from forest to eliminate competition with food production. However, biofuel from agro-residues still depend upon the crop production system, and there are many parameters to deal with in order to investigate the sustainability of biofuel production. There is a theoretical limit to how much biofuel can be achieved globally from agro-residues and this amounts to approximately one third of todays' use of fossil fuels in the transport sector. In reality this theoretical potential may be eliminated by the energy use in the biomass-conversion technologies and production systems, depending on what type of assessment method is used. By surveying existing studies on biofuel conversion the theoretical limit of biofuels from 2010 years' agricultural production was found to be either non-existent due to energy consumption in the conversion process, or up to 2-6000TWh (biogas from residues and waste and ethanol from woody biomass) in the more optimistic cases.

Selective elimination of non-lpr lymphoid cells in mice undergoing lpr-mediated graft-vs-host disease

International Nuclear Information System (INIS)

Perkins, D.L.; Michaelson, J.; Glaser, R.M.; Marshak-Rothstein, A.

1987-01-01

The transfer of lpr BM stem cells into lethally irradiated non-lpr recipients (including the congenic MRL/+ differing only at the lpr locus) causes GVHD characterized by a wasting syndrome. In this study we investigated the interaction between the autoimmune (lpr) and normal (A-Thy) B, T, and RBC cell lineages in two types of radiation chimeras: MRL/lpr plus A-Thy----(MRL/lpr X A-Thy)F1 and MRL/+ plus A-Thy----(MRL/lpr X A-Thy)F1. Analysis of B cell repopulation by competitive RIA of serum Igh-1 allotype showed that both the MRL and the A-Thy donor cells initially engrafted. However, by 2 to 4 mo post-transplantation the normal A-Thy allotype was barely detectable (reduced greater than 2 orders of magnitude), whereas the autoimmune MRL/lpr allotype persisted at normal levels. Similarly, investigation of the donor origin of peripheral blood T cells by two-color flow cytometry showed that by 8 mo post-transplantation normal A-Thy T cells had been eliminated and only MRL/lpr T cells were present in the circulation. In contrast, erythrocytes from both the MRL/lpr and A-Thy donor strains successfully engrafted the F1 recipients and persisted until the termination of the study. Control chimeras transplanted with a mixture of MRL/+ plus A-Thy BM were stably engrafted with both donor strains in both the erythroid and lymphoid populations. Additional experiments in which either B6/lpr or MRL/lpr (and B6/+ or MRL/+ control) BM cells were transferred into (MRL/lpr X B6/+)F1 and (MRL/lpr X B6/lpr)F1 recipients demonstrated that the development of GVHD was not simply due to increased alloreactivity by the lpr donor cells. In these chimeras only the recipients heterozygous (but not homozygous) for the lpr gene developed lpr-GVHD, although both types of recipients had identical genotypes except at the lpr locus

Obtention of ceramic pigments with residue from electroplating

International Nuclear Information System (INIS)

Boss, A.; Kniess, C.T.; Aguiar, B.M. de; Prates, P.B.; Milanez, K.

2011-01-01

The incorporation of industrial residues in industrial processes opens up new business opportunities and reduces the volume of extraction of raw materials, preserving natural resources, which are limited. An important residue is the mud from galvanic industry, consisting of alkali and transition metals. According to NBR 10004/2004, this residue can be classified as Class I (hazardous), depending on the concentration of metals present in the mud. This paper proposes a method for reusing the residue from electroplating in ceramic pigments. The characterization of residual plating was obtained by chemical analysis, mineralogical analysis and pH measurements. The electroplating waste was incorporated in different percentages on a standard pigment formula of industrial ceramic, consisting mainly of Zn, Fe and Cr. The obtained pigments were applied in ceramic glazes to colorimetric and visual analysis, which showed good results with the addition of up to 15% of industrial waste. (author)

Impact of Corn Residue Removal on Crop and Soil Productivity

Science.gov (United States)

Johnson, J. M.; Wilhelm, W. W.; Hatfield, J. L.; Voorhees, W. B.; Linden, D.

2003-12-01

Over-reliance on imported fuels, increasing atmospheric levels of greenhouses and sustaining food production for a growing population are three of the most important problems facing society in the mid-term. The US Department of Energy and private enterprise are developing technology necessary to use high cellulose feedstock, such as crop residues, for ethanol production. Based on production levels, corn (Zea mays L.) residue has potential as a biofuel feedstock. Crop residues are a renewable and domestic fuel source, which can reduce the rate of fossil fuel use (both imported and domestic) and provide an additional farm commodity. Crop residues protect the soil from wind and water erosion, provide inputs to form soil organic matter (a critical component determining soil quality) and play a role in nutrient cycling. Crop residues impact radiation balance and energy fluxes and reduce evaporation. Therefore, the benefits of using crop residues as fuel, which removes crop residues from the field, must be balanced against negative environmental impacts (e.g. soil erosion), maintaining soil organic matter levels, and preserving or enhancing productivity. All ramifications of new management practices and crop uses must be explored and evaluated fully before an industry is established. There are limited numbers of long-term studies with soil and crop responses to residue removal that range from negative to negligible. The range of crop and soil responses to crop residue removal was attributed to interactions with climate, management and soil type. Within limits, corn residue can be harvested for ethanol production to provide a renewable, domestic source of energy feedstock that reduces greenhouse gases. Removal rates must vary based on regional yield, climatic conditions and cultural practices. Agronomists are challenged to develop a protocol (tool) for recommending maximum permissible removal rates that ensure sustained soil productivity.

Determination of aminoglycoside residues in milk and muscle based on a simple and fast extraction procedure followed by liquid chromatography coupled to tandem mass spectrometry and time of flight mass spectrometry.

Science.gov (United States)

Arsand, Juliana Bazzan; Jank, Louíse; Martins, Magda Targa; Hoff, Rodrigo Barcellos; Barreto, Fabiano; Pizzolato, Tânia Mara; Sirtori, Carla

2016-07-01

Antibiotics are widely used in veterinary medicine mainly for treatment and prevention of diseases. The aminoglycosides are one of the antibiotics classes that have been extensively employed in animal husbandry for the treatment of bacterial infections, but also as growth promotion. The European Union has issued strict Maximum Residue Levels (MRLs) for aminoglycosides in several animal origin products including bovine milk, bovine, swine and poultry muscle. This paper describes a fast and simple analytical method for the determination of ten aminoglycosides (spectinomycin, tobramycin, gentamicin, kanamycin, hygromycin, apramycin, streptomycin, dihydrostreptomycin, amikacin and neomycin) in bovine milk and bovine, swine and poultry muscle. For sample preparation, an extraction method was developed using trichloroacetic acid and clean up with low temperature precipitation and C18 bulk. Liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) was used to carry out quantitative analysis and liquid chromatography-quadrupole-time of flight-mass spectrometry (LC-QTOF-MS) was used to screening purposes. Both methods were validated according to the European Union Commission Directive 2002/657/EC. Good performance characteristics were obtained for recovery, precision, calibration curve, specificity, decision limits (CCα) and detection capabilities (CCβ) in all matrices evaluated. The detection limit (LOD) and quantification limit (LOQ) were ranging from 5 to 100ngg(-1) and 12.5 to 250ngg(-1), respectively. Good linearity (r)-above 0.99-was achieved in concentrations ranging from 0.0 to 2.0×MRL. Recoveries ranged from 36.8% to 98.0% and the coefficient of variation from 0.9 to 20.2%, noting that all curves have been made into their own matrices in order to minimize the matrix effects. The CCβ values obtained in qualitative method were between 25 and 250ngg(-1). The proposed method showed to be simple, easy, and adequate for high-throughput analysis of a large

Disposal of Rocky Flats residues as waste

International Nuclear Information System (INIS)

Dustin, D.F.; Sendelweck, V.S.

1993-01-01

Work is underway at the Rocky Flats Plant to evaluate alternatives for the removal of a large inventory of plutonium-contaminated residues from the plant. One alternative under consideration is to package the residues as transuranic wastes for ultimate shipment to the Waste Isolation Pilot Plant. Current waste acceptance criteria and transportation regulations require that approximately 1000 cubic yards of residues be repackaged to produce over 20,000 cubic yards of WIPP certified waste. The major regulatory drivers leading to this increase in waste volume are the fissile gram equivalent, surface radiation dose rate, and thermal power limits. In the interest of waste minimization, analyses have been conducted to determine, for each residue type, the controlling criterion leading to the volume increase, the impact of relaxing that criterion on subsequent waste volume, and the means by which rules changes may be implemented. The results of this study have identified the most appropriate changes to be proposed in regulatory requirements in order to minimize the costs of disposing of Rocky Flats residues as transuranic wastes

Quadratic residues and non-residues selected topics

CERN Document Server

Wright, Steve

2016-01-01

This book offers an account of the classical theory of quadratic residues and non-residues with the goal of using that theory as a lens through which to view the development of some of the fundamental methods employed in modern elementary, algebraic, and analytic number theory. The first three chapters present some basic facts and the history of quadratic residues and non-residues and discuss various proofs of the Law of Quadratic Reciprosity in depth, with an emphasis on the six proofs that Gauss published. The remaining seven chapters explore some interesting applications of the Law of Quadratic Reciprocity, prove some results concerning the distribution and arithmetic structure of quadratic residues and non-residues, provide a detailed proof of Dirichlet’s Class-Number Formula, and discuss the question of whether quadratic residues are randomly distributed. The text is a valuable resource for graduate and advanced undergraduate students as well as for mathematicians interested in number theory.

On residual stresses and fatigue of laser hardened steels

International Nuclear Information System (INIS)

Lin, Ru.

1992-01-01

This thesis deals with studies on residual stresses and fatigue properties of laser-transformation hardened steels. Two types of specimens, cylinders and fatigue specimens were used in the studies. The cylinders, made of Swedish steels SS 2244 and SS 2258 which correspond to AISI 4140 and AISI 52100 respectively, were locally hardened by a single scan of laser beam in the longitudinal direction, with various laser parameters. Residual stress distributions across the hardened tracks were measured by means of X-ray diffraction. The origins of residual stresses were investigated and discussed. For the fatigue specimens, including smooth and notched types made of Swedish steels SS 2244, SS 2225 and SS 1572 (similar to AISI 4140, AISI 4130 and AISI 1035, respectively), laser hardening was carried out in the gauge section. The residual stress field induced by the hardening process and the fatigue properties by plane bending fatigue test were studied. In order to investigate the stability of the residual stress field, stress measurements were also made on specimens being loaded near the fatigue limits for over 10 7 cycles. Further the concept of local fatigue strength was employed to correlate quantitatively the effect of hardness and residual stress field on the fatigue limits. In addition a group of smooth specimens of SS 2244 was induction hardened and the hardening results were compared with the corresponding laser hardened ones in terms of residual stress and fatigue behaviour. It has been found that compressive stresses exist in the hardened zone of all the specimens studied. The laser hardening condition, the specimen and how the hardening is carried out can significantly affect the residual stress field. Laser hardening can greatly improve the fatigue properties by inducing a hardened and compressed surface layer. (112 refs.)(au)

On residual stresses and fatigue of laser hardened steels

Energy Technology Data Exchange (ETDEWEB)

Lin, Ru.

1992-01-01

This thesis deals with studies on residual stresses and fatigue properties of laser-transformation hardened steels. Two types of specimens, cylinders and fatigue specimens were used in the studies. The cylinders, made of Swedish steels SS 2244 and SS 2258 which correspond to AISI 4140 and AISI 52100 respectively, were locally hardened by a single scan of laser beam in the longitudinal direction, with various laser parameters. Residual stress distributions across the hardened tracks were measured by means of X-ray diffraction. The origins of residual stresses were investigated and discussed. For the fatigue specimens, including smooth and notched types made of Swedish steels SS 2244, SS 2225 and SS 1572 (similar to AISI 4140, AISI 4130 and AISI 1035, respectively), laser hardening was carried out in the gauge section. The residual stress field induced by the hardening process and the fatigue properties by plane bending fatigue test were studied. In order to investigate the stability of the residual stress field, stress measurements were also made on specimens being loaded near the fatigue limits for over 10[sup 7] cycles. Further the concept of local fatigue strength was employed to correlate quantitatively the effect of hardness and residual stress field on the fatigue limits. In addition a group of smooth specimens of SS 2244 was induction hardened and the hardening results were compared with the corresponding laser hardened ones in terms of residual stress and fatigue behaviour. It has been found that compressive stresses exist in the hardened zone of all the specimens studied. The laser hardening condition, the specimen and how the hardening is carried out can significantly affect the residual stress field. Laser hardening can greatly improve the fatigue properties by inducing a hardened and compressed surface layer. (112 refs.)(au).

Microbial screening methods for detection of antibiotic residues in slaughter animals

NARCIS (Netherlands)

Pikkemaat, M.G.

2009-01-01

Monitoring of food products from animal origin for the presence of antimicrobial residues is preferably done using microbial screening methods because of their high cost-effectiveness. Traditionally applied methods fail to detect the maximum residue limits which were established when EU Council

A Rapid and Sensitive Assay for the Detection of Benzylpenicillin (PenG in Milk.

Directory of Open Access Journals (Sweden)

Anna Pennacchio

Full Text Available Antibiotics, such as benzyl-penicillin (PenG and cephalosporin, are the most common compounds used in animal therapy. Their massive and illegal use in animal therapy and prophylaxis inevitably causes the presence of traces in foods of animal origin (milk and meat, which creates several problems for human health. With the aim to prevent the negative impact of β-lactam and, in particular, PenG residues present in the milk on customer health, many countries have established maximum residue limits (MRLs. To cope with this problem here, we propose an effective alternative, compared to the analytical methods actually employed, to quantify the presence of penicillin G using the surface plasmon resonance (SPR method. In particular, the PenG molecule was conjugated to a protein carrier to immunize a rabbit and produce polyclonal antibodies (anti-PenG. The produced antibodies were used as molecular recognition elements for the design of a competitive immune-assay for the detection of PenG by SPR experiments. The detection limit of the developed assay was found to be 8.0 pM, a value much lower than the MRL of the EU regulation limit that is fixed at 12 nM. Thus, our results clearly show that this system could be successfully suitable for the accurate and easy determination of PenG.

Evaluation of heavy metals in hazardous automobile shredder residue thermal residue and immobilization with novel nano-size calcium dispersed reagent.

Science.gov (United States)

Lee, Chi-Hyeon; Truc, Nguyen Thi Thanh; Lee, Byeong-Kyu; Mitoma, Yoshiharu; Mallampati, Srinivasa Reddy

2015-10-15

This study was conducted to synthesize and apply a nano-size calcium dispersed reagent as an immobilization material for heavy metal-contaminated automobile shredder residues (ASR) dust/thermal residues in dry condition. Simple mixing with a nanometallic Ca/CaO/PO4 dispersion mixture immobilized 95-100% of heavy metals in ASR dust/thermal residues (including bottom ash, cavity ash, boiler and bag filter ash). The quantity of heavy metals leached from thermal residues after treatment by nanometallic Ca/CaO/PO4 was lower than the Korean standard regulatory limit for hazardous waste landfills. The morphology and elemental composition of the nanometallic Ca/CaO-treated ASR residue were characterized by field emission scanning election microscopy combined with electron dispersive spectroscopy (FE-SEM/EDS). The results indicated that the amounts of heavy metals detectable on the ASR thermal residue surface decreased and the Ca/PO4 mass percent increased. X-ray diffraction (XRD) pattern analysis indicated that the main fraction of enclosed/bound materials on ASR residue included Ca/PO4- associated crystalline complexes, and that immobile Ca/PO4 salts remarkably inhibited the desorption of heavy metals from ASR residues. These results support the potential use of nanometallic Ca/CaO/PO4 as a simple, suitable and highly efficient material for the gentle immobilization of heavy metals in hazardous ASR thermal residue in dry condition. Copyright © 2015 Elsevier B.V. All rights reserved.

Evaluation of pesticide residues in fruits and vegetables from Algeria.

Science.gov (United States)

Mebdoua, Samira; Lazali, Mohamed; Ounane, Sidi Mohamed; Tellah, Sihem; Nabi, Fahima; Ounane, Ghania

2017-06-01

A total of 160 samples of 13 types of fresh fruits and vegetables from domestic production and import were analysed to detect the presence of pesticide residues. Analysis was performed by multi-residual extraction followed by gas chromatography-mass spectrometry. In 42.5% of the tested samples, no residues were found and 12.5% of samples contained pesticide residues above maximum residue limits. Risk assessment for long-term exposure was done for all pesticides detected in this study. Except chlorpyrifos and lambda-cyhalothrin, exposure to pesticides from vegetables and fruits was below 1% of the acceptable daily intake. Short-term exposure assessment revealed that in seven pesticide/commodity combinations, including three pesticides (chlorpyrifos, deltamethrin and lambda-cyhalothrin), the acute reference dose had been exceeded.

Managing woodwaste: Yield from residue

Energy Technology Data Exchange (ETDEWEB)

Nielson, E. [LNS Services, Inc., North Vancouver, British Columbia (Canada); Rayner, S. [Pacific Waste Energy Inc., Burnaby, British Columbia (Canada)

1993-12-31

Historically, the majority of sawmill waste has been burned or buried for the sole purpose of disposal. In most jurisdictions, environmental legislation will prohibit, or render uneconomic, these practices. Many reports have been prepared to describe the forest industry`s residue and its environmental effect; although these help those looking for industry-wide or regional solutions, such as electricity generation, they have limited value for the mill manager, who has the on-hands responsibility for generation and disposal of the waste. If the mill manager can evaluate waste streams and break them down into their usable components, he can find niche market solutions for portions of the plant residue and redirect waste to poor/no-return, rather than disposal-cost, end uses. In the modern mill, residue is collected at the individual machine centre by waste conveyors that combine and mix sawdust, shavings, bark, etc. and send the result to the hog-fuel pile. The mill waste system should be analyzed to determine the measures that can improve the quality of residues and determine the volumes of any particular category before the mixing, mentioned above, occurs. After this analysis, the mill may find a niche market for a portion of its woodwaste.

Compiled data set of exact NOE distance limits, residual dipolar couplings and scalar couplings for the protein GB3

Directory of Open Access Journals (Sweden)

Beat Vögeli

2015-12-01

Full Text Available We compiled an NMR data set consisting of exact nuclear Overhauser enhancement (eNOE distance limits, residual dipolar couplings (RDCs and scalar (J couplings for GB3, which forms one of the largest and most diverse data set for structural characterization of a protein to date. All data have small experimental errors, which are carefully estimated. We use the data in the research article Vogeli et al., 2015, Complementarity and congruence between exact NOEs and traditional NMR probes for spatial decoding of protein dynamics, J. Struct. Biol., 191, 3, 306–317, doi:10.1016/j.jsb.2015.07.008 [1] for cross-validation in multiple-state structural ensemble calculation. We advocate this set to be an ideal test case for molecular dynamics simulations and structure calculations.

On the feasibility of a CENTA-based biosensor to measure antibiotics concentration in milk

Science.gov (United States)

Ferrari, Luca; Rovati, Luigi; Costi, Maria Paola; Venturelli, Alberto; Luciani, Rosaria; Cattini, Stefano

2017-07-01

In veterinary practice antibiotics are used and abused all over the world both to treat diseases and prevent infections and, to increase feed efficiency thus promoting growth in food producing animals. With more than 30 years history, β-lactam antibiotics are nowadays one of the most important group of antibiotics in veterinary medicine. In this paper we investigate the possibility to realize a measurement method suitable for field testing and we propose a competitive biosensor based on a relatively low-cost chromogenic cephalosporin (CENTA) for the quantitative analysis of β-lactams concentration in milk. In particular, the reported preliminary study has been focused on cloxacillin and the reported results indicates that the method is potentially able to detect cloxacillin at a concentration of about one order of magnitude lower than the maximal residue limits (MRL) set by the European Commission.

Dissipation and residue of bifenthrin in wheat under field conditions.

Science.gov (United States)

You, Xiangwei; Jiang, Naiwen; Liu, Fengmao; Liu, Congyun; Wang, Suli

2013-02-01

Field trials were carried out to investigate the dissipation and residue levels of bifenthrin in wheat. After extraction with acetonitrile, the samples were cleaned up by dispersive solid-phase extraction and detected by gas chromatography-mass spectrometry. The half-lives of bifenthrin in wheat seedlings ranged from 2.4 to 10.5 days. At harvest time, the terminal residues of bifenthrin were below the maximum residue limit (0.5 mg/kg) set by Codex Alimentarius Committee or European Union in wheat grain, which suggested that the use of this pesticide was safe for humans. However, the relatively high residue levels of bifenthrin in wheat straw should be paid attention to.

Residual Resistance Data from Cavity Production Projects at Jefferson Lab

International Nuclear Information System (INIS)

Ciovati, Gianluigi; Geng, Rongli; Mammosser, John; Saunders, Jeffrey

2010-01-01

A fundamental limitation towards achieving high quality factors in superconducting radio-frequency cavities is the so-called residual resistance. Understanding and controlling the residual resistance has important implications towards improving the efficiency and reduce the operating cost of continuous wave superconducting linear accelerators. In this contribution we will report on the residual resistance values obtained from measurements of the quality factor of a large set of cavities, with resonant frequency between 805 MHz and 1.5 GHz, all of them processed and tested at Jefferson Lab. Surface treatments included both buffered chemical polishing and electropolishing. The results indicate an approximate value of the residual resistance of about 7-10 n Omega.

Methodology for determining acceptable residual radioactive contamination levels at decommissioned nuclear facilities/sites

International Nuclear Information System (INIS)

Watson, E.C.; Kennedy, W.E. Jr.; Hoenes, G.R.; Waite, D.A.

1979-01-01

The ultimate disposition of decommissioned nuclear facilities and their surrrounding sites depends upon the degree and type of residual contamination. Examination of existing guidelines and regulations has led to the conclusion that there is a need for a general method to derive residual radioactive contamination levels that are acceptable for public use of any decommissioned nuclear facility or site. This paper describes a methodology for determining acceptable residual radioactive contamination levels based on the concept of limiting the annual dose to members of the public. It is not the purpose of this paper to recommend or even propose dose limits for the exposure of the public to residual radioactive contamination left at decommissioned nuclear facilities or sites. Unrestricted release of facilities and/or land is based on the premise that the potential annual dose to any member of the public using this property from all possible exposure pathways will not exceed appropriate limits as may be defined by Federal regulatory agencies. For decommissioned land areas, consideration should be given to people living directly on previously contaminated areas, growing crops, grazing food animals and using well water. Mixtures of radionuclides in the residual contamination representative of fuel reprocessing plants, light water reactors and their respective sites are presented. These mixtures are then used to demonstrate the methodology. Example acceptable residual radioactive contamination levels, based on an assumed maximum annual dose of one millirem, are calculated for several selected times following shutdown of a facility. It is concluded that the methodology presented in this paper results in defensible acceptable residual contamination levels that are directly relatable to risk assessment with the proviso that an acceptable limit to the maximum annual dose will be established. (author)

Determination of metoserpate, buquinolate, and diclofenac in pork, eggs, and milk using liquid chromatography-tandem mass spectrometry.

Science.gov (United States)

Park, Jin-A; Abd El-Aty, A M; Zheng, Weijia; Kim, Seong-Kwan; Choi, Jeong-Min; Hacımüftüoğlu, Ahmet; Shim, Jae-Han; Shin, Ho-Chul

2018-02-23

In this work, a method was developed for the simultaneous determination of residual metoserpate, buquinolate and diclofenac in pork, milk, and eggs. Samples were extracted with 0.1% formic acid in acetonitrile, defatted with n-hexane, and filtered prior to analysis using liquid chromatography-tandem mass spectrometry. The analytes were separated on a C 18 column using 0.1% acetic acid and methanol as the mobile phase. The matrix-matched calibration curves showed good linearity over a concentration range of 5-50 ng/g with coefficients of determination (R 2 ) ≥0.991. The intra- and inter-day accuracies (expressed as recovery percentage values) calculated using three spiking levels (5, 10, and 20 μg/kg) were 80-108.65 and 74.06-107.15%, respectively, and the precisions (expressed as relative standard deviation) were 2.86-13.67 and 0.05-11.74%, respectively, for the tested drugs determined in various matrices. The limits of quantification (1 and 2 μg/kg) were below the uniform residual level (0.01 mg/kg) set for compounds that have no specific maximum residue limit (MRL). The developed method was tested using market samples and none of the target analytes was detected in any of the samples. The validated method proved to be practicable for detection of the tested analytes in pork, milk, and eggs. Copyright © 2018 John Wiley & Sons, Ltd.

Dissipation and residues of emamectin benzoate in cabbage.

Science.gov (United States)

Liu, Shuaigang; Zhang, Fengzu; Wang, Lei; Pan, Canping

2012-09-01

Emamectin benzoate residue dynamics and final residues in supervised field trials at GAP conditions were studied. An HPLC-MS analytical method for the determination of emamectin benzoate in cabbage and soil was developed. The recoveries of emamectin benzoate on cabbage and soil were observed from 71% to 102% at fortification levels of 0.01, 0.1 and 1.0 mg/kg. The reported limit of quantification (LOQ) was found to be 0.01 mg/kg. The dissipation experiments showed the half-lives (T(1/2)) of emamectin benzoate was around 1 days. At pre-harvest intervals (PHI) of 7 and 12 days, emamectin benzoate residue was observed to be below the LOQ.

APPLICATION OF QuEChERS METHOD FOR MULTI-RESIDUE ...

African Journals Online (AJOL)

user

The limit of detection was also determined to be ~0.02µg/L (6µg/kg). Keywords: ... form of maximum residue limits (MRLs). Monitoring ... exposure to the various pesticides in use. Also a .... on the basis of a signal – to – noise ratio (S/N) of 3) ...

[Discussion on present situation of study on pesticide residues in Chinese herbal medicines].

Science.gov (United States)

Kang, Chuan-Zhi; Guo, Lan-Ping; Zhou, Tao; Zhao, Dan; Kang, Li-Ping; He, Ya-Li; Wang, Sheng; Zhou, Liang-Yun

2016-01-01

Pesticide residues in traditional Chinese medicine has attracted widespread attention at home and abroad. This paper analyzed the pollution present situation and existing problems of pesticide residue for Chinese herbal medicines, explicited the analytical methods of pesticide residues in Chinese herbal medicines. Meanwhile, the commonly used pesticide residue degradation and application in Chinese herbal medicines were discussed. Moreover, on the basis of analysis of pesticide residue standards, this paper proposed the necessity and urgency of the limit standard of pesticide residues in Chinese herbal medicines, and provided a scientific references for deepening research and developing safe, green medicines. Copyright© by the Chinese Pharmaceutical Association.

Increased nitration and carbonylation of proteins in MRL +/+ mice exposed to trichloroethene: Potential role of protein oxidation in autoimmunity

International Nuclear Information System (INIS)

Wang Gangduo; Wang Jianling; Ma Huaxian; Khan, M. Firoze

2009-01-01

Even though reactive oxygen and nitrogen species (RONS) are implicated as mediators of autoimmune diseases (ADs), little is known about contribution of protein oxidation (carbonylation and nitration) in the pathogenesis of such diseases. The focus of this study was, therefore, to establish a link between protein oxidation and induction and/or exacerbation of autoimmunity. To achieve this, female MRL +/+ mice were treated with trichloroethene (TCE), an environmental contaminant known to induce autoimmune response, for 6 or 12 weeks (10 mmol/kg, i.p., every 4 th day). TCE treatment resulted in significantly increased formation of nitrotyrosine (NT) and induction of iNOS in the serum at both 6 and 12 weeks of treatment, but the response was greater at 12 weeks. Likewise, TCE treatment led to greater NT formation, and iNOS protein and mRNA expression in the livers and kidneys. Moreover, TCE treatment also caused significant increases (∼3 fold) in serum protein carbonyls (a marker of protein oxidation) at both 6 and 12 weeks. Significantly increased protein carbonyls were also observed in the livers and kidneys (2.1 and 1.3 fold, respectively) at 6 weeks, and to a greater extent at 12 weeks (3.5 and 2.1 fold, respectively) following TCE treatment. The increases in TCE-induced protein oxidation (carbonylation and nitration) were associated with significant increases in Th1 specific cytokine (IL-2, IFN-γ) release into splenocyte cultures. These results suggest an association between protein oxidation and induction/exacerbation of autoimmune response. The results present a potential mechanism by which oxidatively modified proteins could contribute to TCE-induced autoimmune response and necessitates further investigations for clearly establishing the role of protein oxidation in the pathogenesis of ADs.

Biodrying of animal slaughterhouse residues and heat production

Energy Technology Data Exchange (ETDEWEB)

Bernard, Y. [Centre de recherche industrielle, Quebec City, PQ (Canada)

2010-07-01

Animal carcasses from slaughterhouses are usually composted on farms, but the composting process is not optimized and a large volumes of carbonaceous residues are needed. This type of composting takes place over a period of 6 to 9 months in a nonaerated static pile. Quebec's industrial research centre (CRIQ) developed an organic biodrying process (BIOSECO) adapted to large-scale operations in order to optimize the treatment of slaughterhouse residues. Biodrying is a form of composting, in which the thermophilic phase is optimized, making it possible to evaporate large amounts of water. Biodrying is done inside a building and reduces the amount of carbonaceous residues considerably. The process is optimized by the sequence in which the slaughterhouse residues are added, the choice of input and the aeration flow. Slaughterhouse residues can be treated non-stop throughout the entire year. Since the odours are nearly completed limited to the building, the biodrying can be done near the slaughterhouse. A large amount of heat was produced by the process during the pilot project. It was concluded that the BIOSECO biodrying process is suitable for treating slaughterhouse residues in an effective and economic manner, and has the added advantage of producing heat that could be used for various purposes.

Pesticide Residues in Food: Attitudes, Beliefs, and Misconceptions among Conventional and Organic Consumers.

Science.gov (United States)

Koch, Severine; Epp, Astrid; Lohmann, Mark; Böl, Gaby-Fleur

2017-12-01

Pesticide use and pesticide residues in foods have been the subject of controversial public discussions and media coverage in Germany. Against this background, a better understanding of public risk perceptions is needed to promote efficient public health communication. To this end, this study captures the German public's perception of pesticide residues in foods. A representative sample of the population aged 14 years and older (n = 1,004) was surveyed via computer-assisted telephone interviewing on their attitudes and knowledge with regard to pesticide residues. Based on questions regarding their typical consumer behavior, respondents were classified into conventional and organic consumers to identify differences as well as similarities between these two consumer types. As assessed with an open-ended question, both organic and conventional consumers viewed pesticides, chemicals, and toxins as the greatest threats to food quality and safety. Evaluating the risks and benefits of pesticide use, more than two-thirds of organic consumers (70%) rated the risks as greater than the benefits, compared with just over one-half of conventional consumers (53%). Concern about the detection of pesticide residues in the food chain and bodily fluids was significantly higher among organic compared with conventional consumers. Only a minority of respondents was aware that legal limits for pesticide residues (referred to as maximum residue levels) exist, with 69% of organic and 61% of conventional consumers believing that the presence of pesticide residues in foods is generally not permitted. A lack of awareness of maximum residue levels was associated with heightened levels of concern about pesticide residues. Finally, general exposure to media reporting on pesticide residues was associated with more frequent knowledge of legal limits for pesticide residues, whereas actively seeking information on pesticide residues was not. The possible mechanisms underlying these findings are

Analysis of residual stress relief mechanisms in post-weld heat treatment

International Nuclear Information System (INIS)

Dong, Pingsha; Song, Shaopin; Zhang, Jinmiao

2014-01-01

This paper presents a recent study on weld residual stress relief mechanisms associated with furnace-based uniform post-weld heat treatment (PWHT). Both finite element and analytical methods are used to quantitatively examine how plastic deformation and creep relaxation contribute to residual stress relief process at different stages of PWHT process. The key contribution of this work to an improved understanding of furnace based uniform PWHT can be summarized as follows: (1)Plastic deformation induced stress relief during PWHT can be analytically expressed by the change in material elastic deformation capacity (or elastic deformation limit) measured in terms of material yield strength to Young's modulus ratio, which has a rather limited role in overall residual stress relief during furnace based uniform PWHT. (2)The most dominant stress relief mechanism is creep strain induced stress relaxation, as expected. However, a rapid creep strain development accompanied by a rapid residual stress reduction during heating stage before reaching PWHT temperature is shown to contribute to most of the stress relief seen in overall PWHT process, suggesting PWHT hold time can be significantly reduced as far as residual stress relief is concerned. (3)A simple engineering scheme for estimating residual stress reduction is proposed based on this study by relating material type, PWHT temperature, and component wall thickness. - Highlights: • The paper clarified effects of plastic deformation and creep relaxation on weld residual stress relief during uniform PWHT. • Creep strain development is far more important than plastic strain, mostly completed even before hold time starts. • Plastic strain development is insignificant and be analytically described by a material elastic deformation capacity parameter. • An engineering estimation scheme is proposed for determining residual stress reduction resulted from furnace based PWHT

Residual stresses

International Nuclear Information System (INIS)

Macherauch, E.

1978-01-01

Residual stresses are stresses which exist in a material without the influence of external powers and moments. They come into existence when the volume of a material constantly changes its form as a consequence of mechanical, thermal, and/or chemical processes and is hindered by neighbouring volumes. Bodies with residual stress are in mechanical balance. These residual stresses can be manifested by means of all mechanical interventions disturbing this balance. Acoustical, optical, radiological, and magnetical methods involving material changes caused by residual stress can also serve for determining residual stress. Residual stresses have an ambivalent character. In technical practice, they are feared and liked at the same time. They cause trouble because they can be the cause for unexpected behaviour of construction elements. They are feared since they can cause failure, in the worst case with catastrophical consequences. They are appreciated, on the other hand, because, in many cases, they can contribute to improvements of the material behaviour under certain circumstances. But they are especially liked for their giving convenient and (this is most important) mostly uncontrollable explanations. For only in very few cases we have enough knowledge and possibilities for the objective evaluation of residual stresses. (orig.) [de

Formulation of morning product using food residues

Directory of Open Access Journals (Sweden)

Maria do Rosário de Fátima Padilha

2017-09-01

Full Text Available In Brazil, there is resistance of the population to the use of stalks, leaves, peels and seeds of vegetables and fruits, leading to trash important parts of the food in good physiological conditions and with the presence of potential nutrients. In this research, a morning product was elaborated using green and dry coconut residue, jerimum and melon seed, crystallized sicilian lemon peel, cashew nut, common rapadura sweet and ginger. The bacteriological tests proved the hygienic-sanitary quality of the product, therefore suitable for consumption, that is, according to RDC 12/2001. It was also observed that the dehydration of all the residues reached the legal levels and accepted by ANVISA that limits in 25% the water content in the dehydrated foods. As for the centesimal composition, it was observed that the elaborated product with residues and other ingredients had a good content of macro nutrients. A use of the type of waste as a new food proposal constitutes an alternative to avoid and reduce: the serious environmental problem caused by the large residual volume generated, and the inadequate places in which they are stored or deposited, aggravating the scenario of food-borne pollutants.

Washing effects of limonene on pesticide residues in green peppers.

Science.gov (United States)

Lu, Hai-Yan; Shen, Yan; Sun, Xing; Zhu, Hong; Liu, Xian-Jin

2013-09-01

The presence of pesticide residues in food has caused much concern. The low health risks and environmental impacts of limonene make it a very interesting solvent for use in green chemistry. Washing effects of limonene on pesticide residues of methyl chlorpyrifos, chlorothalonil, chlorpyrifos, fenpropathrin and deltamethrin were investigated in green pepper. Results showed that washing with a low concentration of limonene for 5 min (where LOQ is limit of quantitation) caused 53.67%, limonene for 10 min produced 55.90%, limonene for 5 min was the optimal treatment for elimination of pesticide residues in green pepper, considering effect and treatment time as well as cost. © 2013 Society of Chemical Industry.

Residue Levels and Risk Assessment of Pesticides in Pistachio Nuts in Iran

Directory of Open Access Journals (Sweden)

Azadeh Emami

2017-02-01

Full Text Available Background: Pistachio is one of the main nutrients, not only as a strategic crop but also as a main type of nut, in Iranians’ food cycle. The aim of this study was to measure the relative safety of Iranian pistachio based on the standard pesticide’s residue limits, which should be monitored and assessed in the cultivation of pistachio in order to confirm its public health. Methods: Fifty samples of pistachios of different brands were collected from Tehran markets in 2015. QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe sampling method was used in order to determine the pesticide’s residue in the pistachio nuts by Gas chromatography/Mass spectrometry (GC/MS.The method was validated with related parameters. Recovery took place at five concentration rates (n=3 ranging from 81.40% to 93.08% with the majority of RelativeStandard Deviation being lower than 20%. Limits of detection and quantification for all the pesticides were 2µg/kg and10µg/kg, respectively. The validated method seemed to be appropriate for the analysis of pesticide’s residue in pistachio nuts. Results: Identified pesticides included Fenitrothion, Carbaryl and Diazinon. Detectable pesticide’s residue existed in 10% (5 samples of the samples. Conclusion: All the results were compared with the Iran’s National Standards and the European Maximum Residue Limits. As compared to the acceptable daily intake, the calculated daily intake of each pesticide was much lower than the standard level, which could not cause any public health problem.

40 CFR 180.422 - Tralomethrin; tolerances for residues.

Science.gov (United States)

2010-07-01

...-handling establishments, including food service, manufacturing, and processing establishments, such as... shall be limited to a maximum of 0.06 percent active ingredient. Contamination of food and food-contact...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances...

Evaluation of residue-residue contact predictions in CASP9

KAUST Repository

Monastyrskyy, Bohdan

2011-01-01

This work presents the results of the assessment of the intramolecular residue-residue contact predictions submitted to CASP9. The methodology for the assessment does not differ from that used in previous CASPs, with two basic evaluation measures being the precision in recognizing contacts and the difference between the distribution of distances in the subset of predicted contact pairs versus all pairs of residues in the structure. The emphasis is placed on the prediction of long-range contacts (i.e., contacts between residues separated by at least 24 residues along sequence) in target proteins that cannot be easily modeled by homology. Although there is considerable activity in the field, the current analysis reports no discernable progress since CASP8.

Quantification of Drive-Response Relationships Between Residues During Protein Folding.

Science.gov (United States)

Qi, Yifei; Im, Wonpil

2013-08-13

Mutual correlation and cooperativity are commonly used to describe residue-residue interactions in protein folding/function. However, these metrics do not provide any information on the causality relationships between residues. Such drive-response relationships are poorly studied in protein folding/function and difficult to measure experimentally due to technical limitations. In this study, using the information theory transfer entropy (TE) that provides a direct measurement of causality between two times series, we have quantified the drive-response relationships between residues in the folding/unfolding processes of four small proteins generated by molecular dynamics simulations. Instead of using a time-averaged single TE value, the time-dependent TE is measured with the Q-scores based on residue-residue contacts and with the statistical significance analysis along the folding/unfolding processes. The TE analysis is able to identify the driving and responding residues that are different from the highly correlated residues revealed by the mutual information analysis. In general, the driving residues have more regular secondary structures, are more buried, and show greater effects on the protein stability as well as folding and unfolding rates. In addition, the dominant driving and responding residues from the TE analysis on the whole trajectory agree with those on a single folding event, demonstrating that the drive-response relationships are preserved in the non-equilibrium process. Our study provides detailed insights into the protein folding process and has potential applications in protein engineering and interpretation of time-dependent residue-based experimental observables for protein function.

In vivo tracing of organophosphorus pesticides in cabbage (Brassica parachinensis) and aloe (Barbadensis)

International Nuclear Information System (INIS)

Qiu, Junlang; Chen, Guosheng; Zhou, Hong; Xu, Jianqiao; Wang, Fuxin; Zhu, Fang; Ouyang, Gangfeng

2016-01-01

In vivo solid-phase microextraction (SPME) sampling method coupled with gas chromatography–mass spectrometry (GC–MS) analysis was employed to trace the uptake and elimination of organophosphorus pesticides (OPPs) in two kinds of edible plants, cabbage (Brassica parachinensis) and aloe (Barbadensis). The metabolism of fenthion in aloe was also investigated by the liquid chromatography tandem mass spectrometry analysis (LC–MS/MS) to understand the fate of OPPs in living plants better. Transpiration stream concentration factor (TSCF) and depuration rate constants of the OPPs in living plants were obtained therein. The health risk of the OPPs treated aloe was estimated by the maximum residue limit (MRL) approach, and it revealed that the OPPs were rather safe for their fast degradable property. However, peak concentration of fenthion-sulfoxide was found to exceed the MRL and was higher than that of the parent fenthion, which indicated the potential risk of pesticide metabolites. This study highlighted the application of in vivo SPME for contaminant tracing in different living edible plants. The in vivo tracing method is very convenient and can provide more data to evaluate the risk of different pesticides, which are very important for the safety of agriculture production. - Highlights: • In vivo SPME was employed to sample organophosphorus pesticides in vegetables. • Uptake and elimination of OPPs were traced in cabbage and aloe. • In vivo tracing of fenthion demonstrated its metabolites could be rather dangerous. • The risks of OPPs were assessed based on the in vivo tracing data.

In vivo tracing of organophosphorus pesticides in cabbage (Brassica parachinensis) and aloe (Barbadensis)

Energy Technology Data Exchange (ETDEWEB)

Qiu, Junlang; Chen, Guosheng; Zhou, Hong; Xu, Jianqiao; Wang, Fuxin; Zhu, Fang, E-mail: ceszf@mail.sysu.edu.cn; Ouyang, Gangfeng, E-mail: cesoygf@mail.sysu.edu.cn

2016-04-15

In vivo solid-phase microextraction (SPME) sampling method coupled with gas chromatography–mass spectrometry (GC–MS) analysis was employed to trace the uptake and elimination of organophosphorus pesticides (OPPs) in two kinds of edible plants, cabbage (Brassica parachinensis) and aloe (Barbadensis). The metabolism of fenthion in aloe was also investigated by the liquid chromatography tandem mass spectrometry analysis (LC–MS/MS) to understand the fate of OPPs in living plants better. Transpiration stream concentration factor (TSCF) and depuration rate constants of the OPPs in living plants were obtained therein. The health risk of the OPPs treated aloe was estimated by the maximum residue limit (MRL) approach, and it revealed that the OPPs were rather safe for their fast degradable property. However, peak concentration of fenthion-sulfoxide was found to exceed the MRL and was higher than that of the parent fenthion, which indicated the potential risk of pesticide metabolites. This study highlighted the application of in vivo SPME for contaminant tracing in different living edible plants. The in vivo tracing method is very convenient and can provide more data to evaluate the risk of different pesticides, which are very important for the safety of agriculture production. - Highlights: • In vivo SPME was employed to sample organophosphorus pesticides in vegetables. • Uptake and elimination of OPPs were traced in cabbage and aloe. • In vivo tracing of fenthion demonstrated its metabolites could be rather dangerous. • The risks of OPPs were assessed based on the in vivo tracing data.

Pyrophoric potential of plutonium-containing salt residues

International Nuclear Information System (INIS)

Haschke, John M.; Fauske, Hans K.; Phillips, Alan G.

2000-01-01

Ignition temperatures of plutonium and the pyrophoric potential of plutonium-containing pyrochemical salt residues are determined from differential thermal analysis (DTA) data and by modeling of thermal behavior. Exotherms observed at 90-200 deg. C for about 30% of the residues are attributed to reaction of plutonium with water from decomposition of hydrated salts. Exotherms observed near 300 deg. C are consistent with ignition of metal particles embedded in the salt. Onset of self-sustained reaction at temperatures as low as 90 deg. C is not precluded by these results and heat-balance models are developed and applied in predicting the static ignition point of massive metal and in evaluating salt pyrophoricity. Results show that ambient temperatures in excess of 200 deg. C are required for ignition of salt residues and that the most reactive salts cannot ignite at low temperatures because diffusion of oxidant to embedded metal is limited by low salt porosity

Air pollution control residues from waste incineration: current UK situation and assessment of alternative technologies.

Science.gov (United States)

Rani, D Amutha; Boccaccini, A R; Deegan, D; Cheeseman, C R

2008-11-01

Current disposal options for APC residues in the UK and alternative treatment technologies developed world-wide have been reviewed. APC residues are currently landfilled in the UK where they undergo in situ solidification, although the future acceptability of this option is uncertain because the EU waste acceptance criteria (WAC) introduce strict limits on leaching that are difficult to achieve. Other APC residue treatment processes have been developed which are reported to reduce leaching to below relevant regulatory limits. The Ferrox process, the VKI process, the WES-PHix process, stabilisation/solidification using cementitious binders and a range of thermal treatment processes are reviewed. Thermal treatment technologies convert APC residues combined with other wastes into inert glass or glass-ceramics that encapsulate heavy metals. The waste management industry will inevitably use the cheapest available option for treating APC residues and strict interpretation and enforcement of waste legislation is required if new, potentially more sustainable technologies are to become commercially viable.

Air pollution control residues from waste incineration: Current UK situation and assessment of alternative technologies

International Nuclear Information System (INIS)

Amutha Rani, D.; Boccaccini, A.R.; Deegan, D.; Cheeseman, C.R.

2008-01-01

Current disposal options for APC residues in the UK and alternative treatment technologies developed world-wide have been reviewed. APC residues are currently landfilled in the UK where they undergo in situ solidification, although the future acceptability of this option is uncertain because the EU waste acceptance criteria (WAC) introduce strict limits on leaching that are difficult to achieve. Other APC residue treatment processes have been developed which are reported to reduce leaching to below relevant regulatory limits. The Ferrox process, the VKI process, the WES-PHix process, stabilisation/solidification using cementitious binders and a range of thermal treatment processes are reviewed. Thermal treatment technologies convert APC residues combined with other wastes into inert glass or glass-ceramics that encapsulate heavy metals. The waste management industry will inevitably use the cheapest available option for treating APC residues and strict interpretation and enforcement of waste legislation is required if new, potentially more sustainable technologies are to become commercially viable

Radiation protection in a multi-disciplinary research laboratory

International Nuclear Information System (INIS)

O'Donovan, E.J.B.; Jenks, G.J.; Brighton, D.R.

1993-01-01

This paper describes the measures for the protection of personnel against the hazards of ionising and non-ionising radiation at the Materials Research Laboratory (MRL) in Victoria. The paper describes MRL safety and protection policy and management, and gives brief details of procedures and problems at the working level. A comparison of MRL average annual photon doses with all Governmental Research Institutions and industry is given. The good safety record of MRL is evident and shows that the radioactive protection issues are well handled. 4 figs

Comparison of green sample preparation techniques in the analysis of pyrethrins and pyrethroids in baby food by liquid chromatography-tandem mass spectrometry.

Science.gov (United States)

Petrarca, Mateus Henrique; Ccanccapa-Cartagena, Alexander; Masiá, Ana; Godoy, Helena Teixeira; Picó, Yolanda

2017-05-12

A new selective and sensitive liquid chromatography triple quadrupole mass spectrometry method was developed for simultaneous analysis of natural pyrethrins and synthetic pyrethroids residues in baby food. In this study, two sample preparation methods based on ultrasound-assisted dispersive liquid-liquid microextraction (UA-DLLME) and salting-out assisted liquid-liquid extraction (SALLE) were optimized, and then, compared regarding the performance criteria. Appropriate linearity in solvent and matrix-based calibrations, and suitable recoveries (75-120%) and precision (RSD values≤16%) were achieved for selected analytes by any of the sample preparation procedures. Both methods provided the analytical selectivity required for the monitoring of the insecticides in fruit-, cereal- and milk-based baby foods. SALLE, recognized by cost-effectiveness, and simple and fast execution, provided a lower enrichment factor, consequently, higher limits of quantification (LOQs) were obtained. Some of them too high to meet the strict legislation regarding baby food. Nonetheless, the combination of ultrasound and DLLME also resulted in a high sample throughput and environmental-friendly method, whose LOQs were lower than the default maximum residue limit (MRL) of 10μgkg -1 set by European Community for baby foods. In the commercial baby foods analyzed, cyhalothrin and etofenprox were detected in different samples, demonstrating the suitability of proposed method for baby food control. Copyright © 2017 Elsevier B.V. All rights reserved.

Monitoring of Some Pesticides Residue in Consumed tea in Tehran Market

Directory of Open Access Journals (Sweden)

Maryam Amirahmadi

2013-01-01

Full Text Available Tea is an agricultural product of the leaves, leaf buds, and internodes of various cultivars and sub-varieties of the Camellia sinensis plant, processed and vulcanized using various methods. Tea is a main beverage in Iranian food basket so should be free from toxic elements such as pesticides residue. There is no data bank on the residue of pesticides in the consumed black tea in Iran. The present study is the first attempt for monitoring of 25 pesticide residues from different chemical groups in tea samples obtained from local markets in Tehran, I.R. Iran during the period 2011. A reliable and accurate method based on spiked calibration curve and QuEChERS sample preparation was developed for determination of pesticide residues in tea by gas chromatography--mass spectrometry (GC/MS. The using of spiked calibration standards for constructing the calibration curve substantially reduced adverse matrix-related effects and negative recovery affected by GCB on pesticides. The recovery of pesticides at 3 concentration levels (n = 3 was in range of 81.4 - 99.4%. The method was proved to be repeatable with RSDr lower than 20%. The limits of quantification for all pesticides were <=20 ng/g. 53 samples from 17 imported and manufactured brand were analyzed. Detectable pesticides residues were found in 28.3% (15 samples of the samples. All of the positive samples were contaminated with unregulated pesticides (Endosulfan Sulfate or Bifenthrin which are established by ISIRI. None of the samples had contamination higher than maximum residue limit set by EU and India.

Monitoring of some pesticides residue in consumed tea in Tehran market

Directory of Open Access Journals (Sweden)

Hamedani Morteza Pirali

2013-01-01

Full Text Available Abstract Tea is an agricultural product of the leaves, leaf buds, and internodes of various cultivars and sub-varieties of the Camellia sinensis plant, processed and vulcanized using various methods. Tea is a main beverage in Iranian food basket so should be free from toxic elements such as pesticides residue. There is no data bank on the residue of pesticides in the consumed black tea in Iran. The present study is the first attempt for monitoring of 25 pesticide residues from different chemical groups in tea samples obtained from local markets in Tehran, I.R. Iran during the period 2011. A reliable and accurate method based on spiked calibration curve and QuEChERS sample preparation was developed for determination of pesticide residues in tea by gas chromatography–mass spectrometry (GC/MS. The using of spiked calibration standards for constructing the calibration curve substantially reduced adverse matrix-related effects and negative recovery affected by GCB on pesticides. The recovery of pesticides at 3 concentration levels (n = 3 was in range of 81.4 - 99.4%. The method was proved to be repeatable with RSDr lower than 20%. The limits of quantification for all pesticides were ≤20 ng/g. 53 samples from 17 imported and manufactured brand were analyzed. Detectable pesticides residues were found in 28.3% (15 samples of the samples. All of the positive samples were contaminated with unregulated pesticides (Endosulfan Sulfate or Bifenthrin which are established by ISIRI. None of the samples had contamination higher than maximum residue limit set by EU and India.

Advancing environmental toxicology through chemical dosimetry: External exposures versus tissue residues

Science.gov (United States)

McCarty, L.S.; Landrum, P.F.; Luoma, S.N.; Meador, J.P.; Merten, A.A.; Shephard, B.K.; van Wezelzz, A.P.

2011-01-01

The tissue residue dose concept has been used, although in a limited manner, in environmental toxicology for more than 100 y. This review outlines the history of this approach and the technical background for organic chemicals and metals. Although the toxicity of both can be explained in tissue residue terms, the relationship between external exposure concentration, body and/or tissues dose surrogates, and the effective internal dose at the sites of toxic action tends to be more complex for metals. Various issues and current limitations related to research and regulatory applications are also examined. It is clear that the tissue residue approach (TRA) should be an integral component in future efforts to enhance the generation, understanding, and utility of toxicity testing data, both in the laboratory and in the field. To accomplish these goals, several key areas need to be addressed: 1) development of a risk-based interpretive framework linking toxicology and ecology at multiple levels of biological organization and incorporating organism-based dose metrics; 2) a broadly applicable, generally accepted classification scheme for modes/mechanisms of toxic action with explicit consideration of residue information to improve both single chemical and mixture toxicity data interpretation and regulatory risk assessment; 3) toxicity testing protocols updated to ensure collection of adequate residue information, along with toxicokinetics and toxicodynamics information, based on explicitly defined toxicological models accompanied by toxicological model validation; 4) continued development of residueeffect databases is needed ensure their ongoing utility; and 5) regulatory guidance incorporating residue-based testing and interpretation approaches, essential in various jurisdictions. ??:2010 SETAC.

Identification of oligo-N-glycolylneuraminic acid residues in mammal-derived glycoproteins by a newly developed immunochemical reagent and biochemical methods.

Science.gov (United States)

Sato, C; Kitajima, K; Inoue, S; Inoue, Y

1998-01-30

The occurrence of the alpha2-->8-linked oligomeric form of N-glycolylneuraminic acid (oligo-Neu5Gc) residues in mammalian glycoproteins was unequivocally demonstrated using a newly developed anti-oligo/poly-Neu5Gc monoclonal antibody as well as by chemical and biochemical methods. First, the antibody, designated mAb.2-4B, which specifically recognized oligo/poly-Neu5Gc with a degree of polymerization of >2, was developed by establishing a hybridoma cell line from P3U1 myeloma cells fused with splenocytes from an MRL autoimmune mouse immunized with dipalmitoylphosphatidylethanolamine-conjugated oligo/poly-Neu5Gc. Second, oligo-Neu5Gc was shown to occur in glycoproteins derived from pig spleen by Western blot analysis using mAb.2-4B, which was also confirmed by fluorometric high performance liquid chromatographic analysis of the product of periodate oxidation/reduction/acid hydrolysis of the purified glycopeptide fractions and by TLC and 600-MHz 1H NMR spectroscopic analysis of their mild acid hydrolysates. Finally, the ubiquitous occurrence of oligo-Neu5Gc chains as glycoproteinaceous components in Wistar rat tissue was immunochemically indicated. This is the first example demonstrating the diversity in oligo/poly-Sia structure in mammalian glycoproteins, where only poly-N-acetylneuraminic acid is known to occur. Such diversity in oligo/poly-Sia structure also implicates a diverged array of biological functions of this glycan unit in glycoproteins.

Integrated pest management of "Golden Delicious" apples.

Science.gov (United States)

Simončič, A; Stopar, M; Velikonja Bolta, Š; Bavčar, D; Leskovšek, R; Baša Česnik, H

2015-01-01

Monitoring of plant protection product (PPP) residues in "Golden Delicious" apples was performed in 2011-2013, where 216 active substances were analysed with three analytical methods. Integrated pest management (IPM) production and improved IPM production were compared. Results were in favour of improved IPM production. Some active compounds determined in IPM production (boscalid, pyraclostrobin, thiacloprid and thiametoxam) were not found in improved IPM production. Besides that, in 2011 and 2012, captan residues were lower in improved IPM production. Risk assessment was also performed. Chronic exposure of consumers was low in general, but showed no major differences for IPM and improved IPM production for active substances determined in both types of production. Analytical results were compared with the European Union report of 2010 where 1.3% of apple samples exceeded maximum residue levels (MRLs), while MRL exceedances were not observed in this survey.

De-contamination of pesticide residues in food by ionizing radiation

International Nuclear Information System (INIS)

Basfar, Ahmed A.; Mohamed, Khaled A.; Al-Saqer, Omar A.

2012-01-01

The role of gamma irradiation on removal of pesticides in aqueous solutions or in vegetables and fruits was investigated. Radiation - induced decontamination of pesticides is generally greater in aqueous solutions than in selected vegetables and fruits. Residues of malathion (0.5 ppm in potatoes, 8 ppm in onions and dates), pirimiphos-methyl (1 ppm in onions and grapes) and cypermethrin (0.05 ppm in potatoes and 0.1 ppm in onions) were not reduced to below maximum residue limits (MRLs) for irradiation doses up to 1 kGy. The same trend was observed when irradiation was performed for grapes fortified with malathion (8 ppm) and cypermethrin (2 ppm) for absorbed doses up to 2 kGy. Ionizing radiation reduced the residues of pirimiphos-methyl (0.05 ppm in potatoes at1 kGy, 1 ppm in grapes at 2 kGy and 0.1 ppm in dates at1 kGy), malathion (8 ppm in grapes at 7 kGy) and cypermethrin (2 ppm in grapes at 7 kGy) to below maximum residue limits (MRLs). - Highlights: ► The role of irradiation on removal of pesticides in aqueous solutions or in food products was investigated. ► Radiation-induced removal of pesticides is generally greater in aqueous solutions than in food products. ► Radiation can reduce the pirimiphos-methyl in potatoes, grapes and dates to below MRLs. ► Radiation can reduce the malathion and cypermethrin in grapes to below MRLs. ► Radiation is used for dual objectives of reducing pesticide residues and improving food safety.

Methods of measuring residual stresses in components

International Nuclear Information System (INIS)

Rossini, N.S.; Dassisti, M.; Benyounis, K.Y.; Olabi, A.G.

2012-01-01

Highlights: ► Defining the different methods of measuring residual stresses in manufactured components. ► Comprehensive study on the hole drilling, neutron diffraction and other techniques. ► Evaluating advantage and disadvantage of each method. ► Advising the reader with the appropriate method to use. -- Abstract: Residual stresses occur in many manufactured structures and components. Large number of investigations have been carried out to study this phenomenon and its effect on the mechanical characteristics of these components. Over the years, different methods have been developed to measure residual stress for different types of components in order to obtain reliable assessment. The various specific methods have evolved over several decades and their practical applications have greatly benefited from the development of complementary technologies, notably in material cutting, full-field deformation measurement techniques, numerical methods and computing power. These complementary technologies have stimulated advances not only in measurement accuracy and reliability, but also in range of application; much greater detail in residual stresses measurement is now available. This paper aims to classify the different residual stresses measurement methods and to provide an overview of some of the recent advances in this area to help researchers on selecting their techniques among destructive, semi destructive and non-destructive techniques depends on their application and the availabilities of those techniques. For each method scope, physical limitation, advantages and disadvantages are summarized. In the end this paper indicates some promising directions for future developments.

Drugs’ maximal residual limits determination methodology and waiting period’s establishing, in the light of E.U. regulations

Directory of Open Access Journals (Sweden)

Cristina , T. Romeo

2008-12-01

Full Text Available Communitary concept’s related to the drug residues assumption is essential to Romania’s full integration amongst the countries where alimentary security and human consumer’s security have had become national policy. In this respect a concise enumeration of E.U. basic legislative notions, with the specific terminology and of technicalpremises presentation, it is proposed in the aim of Communitary veterinary medicinal product’s residues evaluation as well the MRL’s determination phases in the light of 2377/90 EU Regulation’s understanding.

Effects of residual aberrations explored on single-walled carbon nanotubes

International Nuclear Information System (INIS)

Biskupek, Johannes; Hartel, Peter; Haider, Maximilian; Kaiser, Ute

2012-01-01

The effects of geometric residual aberrations such as coma B 2 and two-fold astigmatism A 1 on the contrast in aberration corrected high resolution transmission electron microscopy (HRTEM) images are investigated on single-walled carbon nanotubes (SWNT). The individual aberrations are adjusted and set up manually using an imaging C S -corrector. We demonstrate how coma B 2 can be recognized by an experienced user directly in the image and how it blurs the contrast. Even with uncorrected (resolution limiting) spherical aberration C S the coma B 2 has to be considered and must be minimized. Limits for a tolerable coma are given. The experiments are confirmed by image simulations. -- Highlights: ► Individual effects of residual aberrations such as B 2 , A 1 , and C S are demonstrated. ► Experimental HRTEM and simulated images of carbon nanotubes are compared. ► A detection limit of 50 nm B 2 in a single HRTEM image is determined.

Annotating Protein Functional Residues by Coupling High-Throughput Fitness Profile and Homologous-Structure Analysis.

Science.gov (United States)

Du, Yushen; Wu, Nicholas C; Jiang, Lin; Zhang, Tianhao; Gong, Danyang; Shu, Sara; Wu, Ting-Ting; Sun, Ren

2016-11-01

Identification and annotation of functional residues are fundamental questions in protein sequence analysis. Sequence and structure conservation provides valuable information to tackle these questions. It is, however, limited by the incomplete sampling of sequence space in natural evolution. Moreover, proteins often have multiple functions, with overlapping sequences that present challenges to accurate annotation of the exact functions of individual residues by conservation-based methods. Using the influenza A virus PB1 protein as an example, we developed a method to systematically identify and annotate functional residues. We used saturation mutagenesis and high-throughput sequencing to measure the replication capacity of single nucleotide mutations across the entire PB1 protein. After predicting protein stability upon mutations, we identified functional PB1 residues that are essential for viral replication. To further annotate the functional residues important to the canonical or noncanonical functions of viral RNA-dependent RNA polymerase (vRdRp), we performed a homologous-structure analysis with 16 different vRdRp structures. We achieved high sensitivity in annotating the known canonical polymerase functional residues. Moreover, we identified a cluster of noncanonical functional residues located in the loop region of the PB1 β-ribbon. We further demonstrated that these residues were important for PB1 protein nuclear import through the interaction with Ran-binding protein 5. In summary, we developed a systematic and sensitive method to identify and annotate functional residues that are not restrained by sequence conservation. Importantly, this method is generally applicable to other proteins about which homologous-structure information is available. To fully comprehend the diverse functions of a protein, it is essential to understand the functionality of individual residues. Current methods are highly dependent on evolutionary sequence conservation, which is

Residual stress analysis for engineering applications by means of neutron diffraction

International Nuclear Information System (INIS)

Gnaeupel-Herold, T.; Brand, P.C.; Prask, H.J.

1999-01-01

Residual stresses originate from spatial differences in plastic deformation, temperature, or phase distribution, introduced by manufacturing processes or during service. Engineering parts and materials experience mechanical, thermal, and chemical loads during their service, and most of these loads introduce stresses that are superimposed on the already existing residual stresses. Residual stresses can therefore limit or improve life and strength of engineering parts; knowledge and understanding of these stresses is therefore critical for optimizing strength and durability. The economic and scientific importance of neutron diffraction residual stress analysis has led to an increasing number of suitable instruments worldwide. All of the major sources due in the next several years will have instruments for the sole purpose of performing residual stress and texture measurements. Recently, a dedicated, state-of-the-art diffractometer has been installed at the National Institute of Standards and Technology reactor. It has been used for a variety of measurements on basic and engineering stress problems. Among the most prominent examples that have been investigated in collaboration with industrial and academic partners are residual stresses in rails, weldments, and plasma-sprayed coatings

Magnetic Resonance Lymphography Findings in Patients With Biochemical Recurrence After Prostatectomy and the Relation With the Stephenson Nomogram

International Nuclear Information System (INIS)

Meijer, Hanneke J.M.; Debats, Oscar A.; Roach, Mack; Span, Paul N.; Witjes, J. Alfred; Kaanders, Johannes H.A.M.; Lin, Emile N.J.Th. van; Barentsz, Jelle O.

2012-01-01

Purpose: To estimate the occurrence of positive lymph nodes on magnetic resonance lymphography (MRL) in patients with a prostate-specific antigen (PSA) recurrence after prostatectomy and to investigate the relation between score on the Stephenson nomogram and lymph node involvement on MRL. Methods and Materials: Sixty-five candidates for salvage radiation therapy were referred for an MRL to determine their lymph node status. Clinical and histopathologic features were recorded. For 49 patients, data were complete to calculate the Stephenson nomogram score. Receiver operating characteristic (ROC) analysis was performed to determine how well this nomogram related to the MRL result. Analysis was done for the whole group and separately for patients with a PSA <1.0 ng/mL to determine the situation in candidates for early salvage radiation therapy, and for patients without pathologic lymph nodes at initial lymph node dissection. Results: MRL detected positive lymph nodes in 47 patients. ROC analysis for the Stephenson nomogram yielded an area under the curve (AUC) of 0.78 (95% confidence interval, 0.61-0.93). Of 29 patients with a PSA <1.0 ng/mL, 18 had a positive MRL. Of 37 patients without lymph node involvement at initial lymph node dissection, 25 had a positive MRL. ROC analysis for the Stephenson nomogram showed AUCs of 0.84 and 0.74, respectively, for these latter groups. Conclusion: MRL detected positive lymph nodes in 72% of candidates for salvage radiation therapy, in 62% of candidates for early salvage radiation therapy, and in 68% of initially node-negative patients. The Stephenson nomogram showed a good correlation with the MRL result and may thus be useful for identifying patients with a PSA recurrence who are at high risk for lymph node involvement.

Guidelines for selection and presentation of residue values of pesticides

NARCIS (Netherlands)

van den Velde-Koerts T; van Hoeven-Arentzen PH; Ossendorp BC; RIVM-SIR

2004-01-01

Residubeoordelingen van bestrijdingsmiddelen worden uitgevoerd om wettelijke residulimieten (MRLs = maximum residue limits) vast te leggen. MRLs worden afgeleid uit de resultaten van die residuproeven met bestrijdingsmiddelen die volgens kritisch "Good Agricultural Practice" zijn

[Simultaneous determination of seven residual solvents in bovis calculus artifactus by headspace gas chromatography].

Science.gov (United States)

Chi, Shuyao; Wu, Dike; Sun, Jinhong; Ye, Ruhan; Wang, Xiaoyan

2014-05-01

A headspace gas chromatography (HS-GC) method was developed for the simultaneous determination of seven residual solvents (petroleum ether (60-90 degrees C), acetone, ethyl acetate, methanol, methylene chloride, ethanol and butyl acetate) in bovis calculus artifactus. The DB-WAX capillary column and flame ionization detector (FID) were used for the separation and detection of the residual solvents, and the internal standard method was used for the quantification. The chromatographic conditions, such as equilibrium temperature and equilibrium time, were optimized. Under the optimized conditions, all of the seven residual solvents showed good linear relationships with good correlation coefficients (not less than 0.999 3) in the prescribed concentration range. At three spiked levels, the recoveries for the seven residual solvents were 94.7%-105.2% with the relative standard deviations (RSDs) less than 3.5%. The limits of detection (LODs) of the method were 0.43-5.23 mg/L, and the limits of quantification (LOQs) were 1.25-16.67 mg/L. The method is simple, rapid, sensitive and accurate, and is suitable for the simultaneous determination of the seven residual solvents in bovis calculus artifactus.

Removal of residual nuclei following a cavitation event using low-amplitude ultrasound.

Science.gov (United States)

Duryea, Alexander P; Cain, Charles A; Tamaddoni, Hedieh A; Roberts, William W; Hall, Timothy L

2014-10-01

Microscopic residual bubble nuclei can persist on the order of 1 s following a cavitation event. These bubbles can limit the efficacy of ultrasound therapies such as shock wave lithotripsy and histotripsy, because they attenuate pulses that arrive subsequent to their formation and seed repetitive cavitation activity at a discrete set of sites (cavitation memory). Here, we explore a strategy for the removal of these residual bubbles following a cavitation event, using low-amplitude ultrasound pulses to stimulate bubble coalescence. All experiments were conducted in degassed water and monitored using high-speed photography. In each case, a 2-MHz histotripsy transducer was used to initiate cavitation activity (a cavitational bubble cloud), the collapse of which generated a population of residual bubble nuclei. This residual nuclei population was then sonicated using a 1 ms pulse from a separate 500-kHz transducer, which we term the bubble removal pulse. Bubble removal pulse amplitudes ranging from 0 to 1.7 MPa were tested, and the backlit area of shadow from bubbles remaining in the field following bubble removal was calculated to quantify efficacy. It was found that an ideal amplitude range exists (roughly 180 to 570 kPa) in which bubble removal pulses stimulate the aggregation and subsequent coalescence of residual bubble nuclei, effectively removing them from the field. Further optimization of bubble removal pulse sequences stands to provide an adjunct to cavitation-based ultrasound therapies such as shock wave lithotripsy and histotripsy, mitigating the effects of residual bubble nuclei that currently limit their efficacy.

Persistence of two neem formulations on peach leaves and fruit: effect of the distribution.

Science.gov (United States)

Sarais, Giorgia; Angioni, Alberto; Lai, Francesco; Cabras, Paolo; Caboni, Pierluigi

2009-03-25

Persistence of azadirachtins (A+B) and of the other limonoids (nimbin, salannin, deacetylnimbin, and deacetylsalannin) on peach leaves and fruits was studied using a commercial formulation (form. C) compared with an experimental formulation (form. E) prepared with coformulations allowed in organic culture. Field experiments were carried out using three concentrations: 1x, 5x, and 10x the dose recommended by the manufacturer. The EU maximum residue level (MRL) in fruits and vegetables for azadirachtin A is 1 mg/kg with a preharvest interval (PHI) of 3 days. At the recommended dose, azadirachtin A residue on fruits was not detectable (LOQ stability. This is probably due to the amount of the active ingredients that diffuse into the epicuticular wax layer thus enhancing photostability of azadirachtoids.

Residual extrapolation operators for efficient wavefield construction

KAUST Repository

Alkhalifah, Tariq Ali

2013-02-27

Solving the wave equation using finite-difference approximations allows for fast extrapolation of the wavefield for modelling, imaging and inversion in complex media. It, however, suffers from dispersion and stability-related limitations that might hamper its efficient or proper application to high frequencies. Spectral-based time extrapolation methods tend to mitigate these problems, but at an additional cost to the extrapolation. I investigate the prospective of using a residual formulation of the spectral approach, along with utilizing Shanks transform-based expansions, that adheres to the residual requirements, to improve accuracy and reduce the cost. Utilizing the fact that spectral methods excel (time steps are allowed to be large) in homogeneous and smooth media, the residual implementation based on velocity perturbation optimizes the use of this feature. Most of the other implementations based on the spectral approach are focussed on reducing cost by reducing the number of inverse Fourier transforms required in every step of the spectral-based implementation. The approach here fixes that by improving the accuracy of each, potentially longer, time step.

Numerical and Experimental Study on the Residual Stresses in the Nitrided Steel

Science.gov (United States)

Song, X.; Zhang, Zhi-Qian; Narayanaswamy, S.; Huang, Y. Z.; Zarinejad, M.

2016-09-01

In the present work, residual stresses distribution in the gas nitrided AISI 4140 sample has been studied using finite element (FE) simulation. The nitrogen concentration profile is obtained from the diffusion-controlled compound layer growth model, and nitrogen concentration controls the material volume change through phase transformation and lattice interstitials which results in residual stresses. Such model is validated through residual stress measurement technique—micro-ring-core method, which is applied to the nitriding process to obtain the residual stresses profiles in both the compound and diffusion layer. The numerical and experimental results are in good agreement with each other; they both indicate significant stress variation in the compound layer, which was not captured in previous research works due to the resolution limit of the traditional methods.

Monitoring of aflatoxin M1 in raw cow milk in Croatia during winter 2015

Directory of Open Access Journals (Sweden)

Nina Bilandžić

2016-01-01

Full Text Available A total of 548 raw milk samples were collected in the western, central and eastern regions of Croatia during February and March 2015. Aflatoxin M1 (AFM1 concentrations were quantified by the enzyme immunoassay method. The method limits of detection (LOD and quantification (LOQ were 22.2 and 34.2 ng/kg, respectively. The mean AFM1 levels measured in the three regions were (ng/kg as follows: western 3.69, central 3.11 and eastern 4.14. In total, the 548 samples analysed concentrations were below the LOD value and accordingly below the European Union maximum residue level (EU MRL of 50 ng/kg. The results suggest an absence of use of contaminated with aflatoxin B1 supplementary feedstuff for lactating cows in winter 2015. Such results might be related to the improved storage conditions for feed as well as to the enhanced and more stringent feed control system for mycotoxins in Croatia.

EFSA CONTAM Panel (EFSA Panel on Contaminants in the Food Chain), 2015. Scientific Opinion on risks for public health related to the presence of chlorate in food

DEFF Research Database (Denmark)

Petersen, Annette

Following a request from the European Commission, the risks to human health related to the presence of chlorate in food were assessed by the EFSA Panel on Contaminants in the Food Chain (CONTAM Panel). The presence of chlorate in food can arise from the use of chlorinated water for food processing...... and the disinfection of food-processing equipment. Inhibition of iodine uptake in humans was identified as the critical effect for chronic exposure to chlorate. A tolerable daily intake (TDI) of 3 µg chlorate/kg body weight (b.w.) was set by read-across from a TDI of 0.3 µg/kg b.w. derived for this effect...... with mild or moderate iodine deficiency. Mean and 95th percentile acute exposures were below the ARfD for all age groups indicating no concern. Based on the current practices in food industry, application of a hypothetical maximum residue limit (MRL) of 0.7 mg/kg for all foodstuffs and drinking water would...

Validation approach for a fast and simple targeted screening method for 75 antibiotics in meat and aquaculture products using LC-MS/MS.

Science.gov (United States)

Dubreil, Estelle; Gautier, Sophie; Fourmond, Marie-Pierre; Bessiral, Mélaine; Gaugain, Murielle; Verdon, Eric; Pessel, Dominique

2017-04-01

An approach is described to validate a fast and simple targeted screening method for antibiotic analysis in meat and aquaculture products by LC-MS/MS. The strategy of validation was applied for a panel of 75 antibiotics belonging to different families, i.e., penicillins, cephalosporins, sulfonamides, macrolides, quinolones and phenicols. The samples were extracted once with acetonitrile, concentrated by evaporation and injected into the LC-MS/MS system. The approach chosen for the validation was based on the Community Reference Laboratory (CRL) guidelines for the validation of screening qualitative methods. The aim of the validation was to prove sufficient sensitivity of the method to detect all the targeted antibiotics at the level of interest, generally the maximum residue limit (MRL). A robustness study was also performed to test the influence of different factors. The validation showed that the method is valid to detect and identify 73 antibiotics of the 75 antibiotics studied in meat and aquaculture products at the validation levels.

Persistence of DDT and parathion residues on a plant surface as influenced by weather factors

NARCIS (Netherlands)

Fahmy, H.S.M.

1961-01-01

The decay of DDT and parathion deposits under the influence of temperature, rain and ultraviolet radiation was described. Temperature and solar radiation were the main factors limiting the residual effect. High mean temperatures were more important than high maxima.

DDT residues were more

Pump limiter studies in Tore Supra

International Nuclear Information System (INIS)

Chatelier, M.; Bonnel, P.; Bruneau, J.L.; Gil, C.; Grisolia, C.; Loarer, T.; Martin, G.; Pegourie, B.; Rodriguez, L.

1991-01-01

The aim of the Tore Supra pump limiter program is to study particle exhaust with a pump limiter system in long-pulse discharges with continuous pellet fueling and strong auxiliary heating. The pump limiter system consists of six vertical modules, located at the bottom of the machine, and one horizontal module at the outer midplane. The instrumentation of the limiter included pressure gauges, a residual gas analyser Langmuir probes, a spectrometer and water calorimeters. Initial results in low-density discharges, with the outboard limiter only, showed a modest effect on the plasma density, while large exhaust fluxes were measured in the pump limiter, without any external fueling

Erythromycin residue in honey from the Southern Marmara region of Turkey.

Science.gov (United States)

Gunes, Nazmiye; Cibik, Recep; Gunes, Mesut Ertan; Aydin, Levent

2008-11-01

Honey samples, collected from the Southern Marmara region of Turkey, were analysed for erythromycin residues by liquid chromatography-mass spectrometry using electrospray ionization in the positive ion mode (LC-ESI-MS). Fifty samples, comprising chestnut, pine, linden and multi-flower honeys, were collected directly from hives and analyzed. The limit of detection and quantification were 6 and 20 ng g(-1), respectively, and recovery ranged from 85 to 89%. Four of the honey samples (8%) were found to be contaminated with erythromycin residues at concentrations ranging from 50 to 1776 ng g(-1). An erythromycin-fortified cake feeding assay was also performed in a defined hive to test the transfer of erythromycin residue to the honey matrix. In this test hive, the residue level in the honey, 3 months after dosing, was approximately 28 ng g(-1).

Regulatory and management approaches to NORM residues in Malaysia

International Nuclear Information System (INIS)

Omar, M.; Teng, I.L.

2006-01-01

Naturally Occurring Radioactive Material (NORM) processing industries in Malaysia include oil and gas production and mineral processing plants. These industries are controlled by the Atomic Energy Licensing Board of Malaysia (AELB) through the enforcement of the Atomic Energy Licensing Act 1984 (Act 304). Related regulations have been developed in order to ensure the safety of workers and members of the public. However, more regulations are necessary for the safe handling of NORM. NORM processing generates various types of NORM residues that require proper management. As for low-level NORM residues, landfill disposal can be exempted from regulatory control if the Radiological Impact Assessment (RIA) shows that the additional dose to the members of the public is below the limit set by the authority. This paper outlines the regulatory and management approaches to NORM residues in Malaysia. (author)

Behavior of fluopyram and tebuconazole and some selected pesticides in ripe apples and consumer exposure assessment in the applied crop protection framework.

Science.gov (United States)

Podbielska, Magdalena; Szpyrka, Ewa; Piechowicz, Bartosz; Zwolak, Aneta; Sadło, Stanisław

2017-07-01

The supervised field trials were conducted in a commercial apple orchard in 2016. The trials were an attempt to determine a model for dissipation and toxicological evaluation of fluopyram, tebuconazole, captan, tetrahydrophthalimide (THPI), pirimicarb, spirodiclofen, and boscalid residues detected in fruit of Red Jonaprince, Lobo, and Gala varieties immediately before harvest. The analysis also covered amounts of pesticides still present in remnants of calyx in Lobo and Gala varieties immediately before harvest. Laboratory samples of ripe apples were collected within 14 days of the treatment. Levels of pesticide residues detected in the samples changed at a constant exponential rate, and the residue levels found in ripe apples of Red Jonaprince, Gala, and Lobo varieties immediately before harvest were below maximum residue levels (MRL). Overall, captan residues in remnants of calyx were at a level of 22.3% for the Gala variety and 9.3% for the Lobo variety. Likewise, the long-term daily intake of the detected substances by a Polish adult consumer was low, ranging from 0.02% ADI for pirimicarb to 0.72% ADI for captan.

Process and catalysis for hydrocracking of heavy oil and residues

Energy Technology Data Exchange (ETDEWEB)

Morel, F.; Kressmann, S. [Centre d' Etudes et de developpement Indutriel ' Rene Navarre' , Vernaison (France); Harle, V.; Kasztelan, S. [Division Cinetique et Catalyse, Rueil-Malmaison (France)

1997-07-01

Atmospheric or vacuum residue can be converted into valuable distillates using reaction temperature, high hydrogen pressure and low contact time hydroprocessing units. Various residue hydrocracking processes are now commercially employed using fixed bed, moving bed or ebullated bed reactors. The choice of process type depends mainly on the amount of metals and asphaltenes in the feed and on the level of conversion required. Various improvements have been introduced in the last decade to increase run length, conversion level, products qualities and stability of the residual fuel. These improvements include on stream catalysts replacement systems, swing reactors, improved feed distribution, guard bed materials limiting pressure drop, coke resistant catalysts, complex association of catalysts using particle size, activity and pore size grading. Further improvement of the resistance of catalysts to deactivation by coke and metal deposits and of the hydrodenitrogenation activity are two major challenges for the development of new residue hydrocracking catalysts and processes. 29 refs.

Application of Stable Isotope in Detection of Veterinary Drug Residues

International Nuclear Information System (INIS)

Wang Wei; Liu Zhanfeng; Du Xiaoning

2010-01-01

In recent years, there has happened a series of significant food safety events worldwide, which lower down consumers' confidence in food safety, and they are taking increasing care about the sources of their foods. The safety problem of animal-origin foods has become a global topic for discussion. Therefore, it is a pressing task to establish a precise, sensitive and reliable method for analyzing veterinary drug residue. An introduction of the present status regarding veterinary drug residue analysis was made in the paper, and it briefly summarized the limit of detection (LOD) and quantification (LOQ) which could be reached in veterinary drug residue analysis by isotopic internal standard method domestically and abroad. The paper also made a review of the progress in applied research of stable isotope labeled compound in veterinary drug residue analysis of, such as, antibiotic medicines, furans and sulfonamides. The paper elucidated the great importance of the application of stable isotopes in the sane development of China's food safety system. (authors)

40 CFR Appendix Vii to Part 266 - Health-Based Limits for Exclusion of Waste-Derived Residues*

Science.gov (United States)

2010-07-01

... Waste-Derived Residues* VII Appendix VII to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF SPECIFIC HAZARDOUS WASTES AND SPECIFIC TYPES OF HAZARDOUS WASTE MANAGEMENT FACILITIES Pt. 266, App. VII Appendix VII to Part 266—Health...

A survey of residual analysis and a new test of residual trend.

Science.gov (United States)

McDowell, J J; Calvin, Olivia L; Klapes, Bryan

2016-05-01

A survey of residual analysis in behavior-analytic research reveals that existing methods are problematic in one way or another. A new test for residual trends is proposed that avoids the problematic features of the existing methods. It entails fitting cubic polynomials to sets of residuals and comparing their effect sizes to those that would be expected if the sets of residuals were random. To this end, sampling distributions of effect sizes for fits of a cubic polynomial to random data were obtained by generating sets of random standardized residuals of various sizes, n. A cubic polynomial was then fitted to each set of residuals and its effect size was calculated. This yielded a sampling distribution of effect sizes for each n. To test for a residual trend in experimental data, the median effect size of cubic-polynomial fits to sets of experimental residuals can be compared to the median of the corresponding sampling distribution of effect sizes for random residuals using a sign test. An example from the literature, which entailed comparing mathematical and computational models of continuous choice, is used to illustrate the utility of the test. © 2016 Society for the Experimental Analysis of Behavior.

Retaining Residual Ovarian Tissue following Ovarian Failure Has Limited Influence on Bone Loss in Aged Mice

Directory of Open Access Journals (Sweden)

Zelieann R. Craig

2010-01-01

Full Text Available Previous work showed that retaining residual ovarian tissue protects young mice from accelerated bone loss following ovarian failure. The present study was designed to determine whether this protection is also present in aged animals. Aged (9–12 months C57BL/6Hsd female mice were divided into: CON (vehicle, VCD (160 mg/kg; 15d, or OVX (ovariectomized. Lumbar BMD was monitored by DXA and μCT used to assess vertebral microarchitecture. BMD was not different between VCD and CON at any time point but was lower (P<.05 than baseline, starting 1 month after ovarian failure in VCD and OVX mice. Following μCT analysis there were no differences between CON and VCD, but OVX mice had lower bone volume fraction, trabecular thickness, and a trend for decreased connectivity density. These findings provide evidence that retention of residual ovarian tissue may protect aged follicle-depleted mice from accelerated bone loss to a lesser extent than that observed in young mice.

Residual Stress Evaluation of Weld Inlay Process on Reactor Vessel Nozzles

Energy Technology Data Exchange (ETDEWEB)

Cho, Kihyun; Cho, Hong Seok [KEPCO KPS, Naju (Korea, Republic of)

2015-10-15

Weld overlay, weld inlay and stress improvement are mitigation technologies for butt joints. Weld overlay is done on pressurizer nozzles which are the highest potential locations occurring PWSCC due to high temperature in Korea. Reactor vessel nozzles are other big safety concerns for butt joints. Weld overlay and stress improvement should be so difficult to apply to those locations because space is too limited. Weld inlay should be one of the solutions. KEPCO KPS has developed laser welding system and process for reactor nozzles. Welding residual stress analysis is necessary for flaw evaluation. United States nuclear regulatory commission has calculated GTAW(Gas Tungsten Arc Welding) residual stress using ABAQUS. To confirm effectiveness of weld inlay process, welding residual stress analysis was performed. and difference between GTAW and LASER welding process was compared. Evaluation of weld inlay process using ANSYS and ABAQUS is performed. All of the both results are similar. The residual stress generated after weld inlay was on range of 450-500 MPa. Welding residual stresses are differently generated by GTAW and LASER welding. But regardless of welding process type, residual tensile stress is generated on inside surface.

Evaluation of pesticide residues in oranges from São Paulo, Brazil

Directory of Open Access Journals (Sweden)

Viviane Emi NAKANO

2016-01-01

Full Text Available Pesticides in “PERA” orange samples (N = 57 from São Paulo City, Brazil were assessed and the pesticide intake contribution was estimated for chronic risk assessment. Seventy-six pesticides were evaluated by the gas chromatography multi-residue method, including isomers and metabolites (4.332 determinations. The mean recoveries at the limit of quantification level were in the range of 72-115% and the relative standard deviation for five replicate samples was 1-11%. The limits of detection and quantification ranged from 0.005 to 0.4 mg.kg−1 and from 0.01 to 0.8 mg.kg−1, respectively. Pesticides were found in 42.1% of the samples at levels ranging from 0.06 to 2.9 mg.kg−1. Of the contaminated samples, 3.5% contained residues (bifenthrin and clofentezine above the maximum residue level and 12.3% contained unauthorized pesticides (azinphos-ethyl, parathion, myclobutanil, profenofos, and fenitrothion. The estimated risk characterization for orange intake by adults and children, respectively, ranged from 0.04 to 6.6% and from 0.1 to 26.5% of the acceptable daily intake. The detection of irregular residues emphasizes the need for better implementation of Good Agriculture Practices and greater control of formulated products. Other pesticides surveyed did not pose a health risk due to consumption.

Detection of chloramphenicol residue in bovine meat using Liquid Chromatography Mass Spectrometry

Directory of Open Access Journals (Sweden)

Widiastuti R

2014-03-01

Full Text Available Chloramphenicol (CAP is a broad spectrum antibiotic that has been banned in many countries due to its serius side effect to human. Detection of CAP residue in food has been determined to a minimum required performance limit (MRPL of 0.3 ng/g. The purpose of this research was to conduct the analysis of CAP residue in bovine meat by using LCMS and to study the presence of CAP residue in marketed bovine meat samples. LC separation was done on a Shimpack column C18 with ammonium acetate 10 mM/water as mobile phase, and ESI-MS analysis in negative ion mode. The coefficient of determination, R2 = 0.9981 at concentration of 0.125, 0.25, 0.63, 1,00 and 2.00 ng/g. Recovery at three fortification levels (0.25, 0.50 and 1.00 ng/g was in the range 77.5, 97.3 and 83.4%. The decision limit and the detection capability were 0.15 ng/g and 0.17 ng/g respectively. Analysis results of 52 marketed samples showed that CAP residue were detected in 9 samples in the concentration range of 0.14 to 2.70 ng/g and 6 among those positive samples were above the MRPL value. Therefore, it is important to increase the awareness and also to monitor regularly CAP residues in food originated from animal to provide safe food for the consumers.

Pesticide residue analysis of soil, water, and grain of IPM basmati rice.

Science.gov (United States)

Arora, Sumitra; Mukherji, Irani; Kumar, Aman; Tanwar, R K

2014-12-01

The main aim of the present investigations was to compare the pesticide load in integrated pest management (IPM) with non-IPM crops of rice fields. The harvest samples of Basmati rice grain, soil, and irrigation water, from IPM and non-IPM field trials, at villages in northern India, were analyzed using multi-pesticide residue method. The field experiments were conducted for three consecutive years (2008-2011) for the successful validation of the modules, synthesized for Basmati rice, at these locations. Residues of tricyclazole, propiconazole, hexconazole, lambda cyhalothrin, pretilachlor chlorpyrifos, DDVP, carbendazim, and imidacloprid were analyzed from two locations, Dudhli village of Dehradun, Uttrakhand and Saboli and Aterna village of Sonepat, Haryana. The pesticide residues were observed below detectable limit (BDL) (water samples (2008-09). Residues of tricyclazole and carbendazim, analyzed from same locations, revealed pesticide residues as BDL (water samples (2009-2010). The residues of tricyclazole, propioconazole, chlorpyrifos, hexaconazole, pretilachlor, and λ-cyhalothrin were also found as BDL (water samples (<0.001-0.05 μg/L) (2010-2011).

Residual life of technical systems; diagnosis, prediction and life extension

International Nuclear Information System (INIS)

Reinertsen, Rune

1996-01-01

The paper presents and discusses research related to residual life of non-repairable and repairable technical systems. Diagnosis of systems and extension of residual life of technical systems are also presented and discussed. This paper concludes that research published describing determination and extension of residual life as well as methods for diagnosis of non-repairable and repairable technical systems, is somewhat limited. Many papers have a rather pragmatic approach. The authors only describe special cases from their own plant and do not provide any explanation of a more academical nature. The other papers are mainly describing very specific applications of statistical models, leaving the more general case out of consideration. One of the main results of this paper is to point out these facts, and thereby identify the need for future research in this area

Persistent Organochlorine Pesticide Residues in Some Selected Cocoa Beverages in Nigeria

Directory of Open Access Journals (Sweden)

Olayinka A. Ibigbami

2017-12-01

Full Text Available This study evaluates the quality of the cocoa beverages produced in Nigeria with respect to the occurrence and levels of organochlorine pesticides OCPs residues in order to ascertain the potential health risks to the general public. Seven cocoa-based beverages were analysed for 17 OCP residues using gas chromatography coupled with an Electron Captured Detector (GC-ECD after extraction and silica-gel clean-up. The study reveals the presence of ten OCP residues in the cocoa beverages, with a concentration range from not detected ND—0.256 mg/kg, while α-BHC, β-BHC, methoxychlor, p,p′-DDE, dieldrin, endrin aldehyde, and endosulfan sulphate were not detected in any of the analysed samples. The contamination pattern of OCPs in the beverages was in the following order: Ovaltine > Milo > Cadbury-choco > Bournvita > Cowbell-coffee > Richoco > Oluji, with p,p′-DDT being the most frequently found pesticide. Heptachlor and endosulfan II showeda residual level above the European Union (EU Maximum Residual Limits (MRLs in only one sample.

High levels of DDT in breast milk: Intake, risk, lactation duration, and involvement of gender

International Nuclear Information System (INIS)

Bouwman, Hindrik; Kylin, Henrik; Sereda, Barbara; Bornman, Riana

2012-01-01

We investigated presence and levels of DDT in 163 breast milk samples from four South African villages where, in three of them, malaria is controlled with DDT-sprayed indoors. Mean ΣDDT levels in breast milk were 18, 11, and 9.5 mg/kg mf (milk fat) from the three DDT-sprayed villages, respectively, including the highest ΣDDT level ever reported for breast milk from South Africa (140 mg/kg mf). Understanding the causes for these differences would be informative for exposure reduction intervention. The Provisional Tolerable Daily Intake (PTDI) for DDT by infants, and the Maximum Residue Limit (MRL) were significantly exceeded. DDT had no effect on duration of lactation. There were indications (not significant) from DDT-sprayed villages that first-born female infants drink milk with more ΣDDT than first-born male infants, and vice versa for multipara male and female infants, suggesting gender involvement on levels of DDT in breast milk – requiring further investigation. - Highlights: ► The highest ΣDDT in breast milk ever found in South Africa is reported. ► Maximum Residue Limit is exceeded, up to 99 times. ► Provisional Tolerable Daily Intake is exceeded, up to 310 times. ► High ΣDDT did not affect duration of lactation. ► Infant gender may affect levels of ΣDDT in breast milk. - High levels of DDT in breast milk from a DDT-spayed area exceeded known limits in milk, but did not affect duration lactation. Infant gender may affect levels of ΣDDT in breast milk.

The maximum possible stress intensity factor for a crack in an unknown residual stress field

International Nuclear Information System (INIS)

Coules, H.E.; Smith, D.J.

2015-01-01

Residual and thermal stress fields in engineering components can act on cracks and structural flaws, promoting or inhibiting fracture. However, these stresses are limited in magnitude by the ability of materials to sustain them elastically. As a consequence, the stress intensity factor which can be applied to a given defect by a self-equilibrating stress field is also limited. We propose a simple weight function method for determining the maximum stress intensity factor which can occur for a given crack or defect in a one-dimensional self-equilibrating stress field, i.e. an upper bound for the residual stress contribution to K I . This can be used for analysing structures containing defects and subject to residual stress without any information about the actual stress field which exists in the structure being analysed. A number of examples are given, including long radial cracks and fully-circumferential cracks in thick-walled hollow cylinders containing self-equilibrating stresses. - Highlights: • An upper limit to the contribution of residual stress to stress intensity factor. • The maximum K I for self-equilibrating stresses in several geometries is calculated. • A weight function method can determine this maximum for 1-dimensional stress fields. • Simple MATLAB scripts for calculating maximum K I provided as supplementary material.

Microwave calcination for plutonium immobilization and residue stabilization

Energy Technology Data Exchange (ETDEWEB)

Harris, M.J.; Rising, T.L.; Roushey, W.J.; Sprenger, G.S. [Kaiser-Hill Co., Golden, CO (United States)

1995-12-01

In the late 1980`s development was begun on a process using microwave energy to vitrify low level mixed waste sludge and transuranic mixed waste sludge generated in Building 374 at Rocky Flats. This process was shown to produce a dense, highly durable waste form. With the cessation of weapons production at Rocky Flats, the emphasis has changed from treatment of low level and TRU wastes to stabilizaiton of plutonium oxide and residues. This equipment is versatile and can be used as a heat source to calcine, react or vitrify many types of residues and oxides. It has natural economies in that it heats only the material to be treated, significantly reducing cycle times over conventional furnaces. It is inexpensive to operate in that most of the working components remain outside of any necessary contamination enclosure and therefore can easily be maintained. Limited testing has been successfully performed on cerium oxide (as a surrogate for plutonium oxide), surrogate electrorefining salts, surrogate residue sludge and residue ash. Future plans also include tests on ion exchange resins. In an attempt to further the usefullness of this technology, a mobile, self-contained microwave melting system is currently under development and expected to be operational at Rocky Flats Enviromental Technology Site by the 4th quarter of FY96.

Annatto seed residue (Bixa orellana L.: nutritional quality

Directory of Open Access Journals (Sweden)

Melissa Alessandra Valério

2015-06-01

Full Text Available Considering that annatto seeds are rich in protein, the present work aimed to evaluate the biological quality of this nutrient in the meal residue originating from annatto seed processing. We determined the general composition, mineral levels, amino acid composition and chemical scores, antinutritional factors, and protein quality using biological assays. The following values were obtained: 11.50% protein, 6.74% moisture, 5.22% ash, 2.22% lipids, 42.19% total carbohydrates and 28.45% fiber. The residue proved to be a food rich in fiber and also a protein source. Antinutritional factors were not detected. The most abundant amino acids were lysine, phenylalanine + tyrosine, leucine and isoleucine. Valine was the most limiting amino acid (chemical score 0.22. The protein quality of the seed residue and the isolated protein showed no significant differences. The biological value was lower than that of the control protein but higher than that found in other vegetables. Among the biochemical analyses, only creatinine level was decreased in the two test groups compared to the control group. Enzyme tests did not indicate liver toxicity. The results showed favorable aspects for the use of annatto seed residue in the human diet, meriting further research.

Microwave calcination for plutonium immobilization and residue stabilization

International Nuclear Information System (INIS)

Harris, M.J.; Rising, T.L.; Roushey, W.J.; Sprenger, G.S.

1995-01-01

In the late 1980's development was begun on a process using microwave energy to vitrify low level mixed waste sludge and transuranic mixed waste sludge generated in Building 374 at Rocky Flats. This process was shown to produce a dense, highly durable waste form. With the cessation of weapons production at Rocky Flats, the emphasis has changed from treatment of low level and TRU wastes to stabilizaiton of plutonium oxide and residues. This equipment is versatile and can be used as a heat source to calcine, react or vitrify many types of residues and oxides. It has natural economies in that it heats only the material to be treated, significantly reducing cycle times over conventional furnaces. It is inexpensive to operate in that most of the working components remain outside of any necessary contamination enclosure and therefore can easily be maintained. Limited testing has been successfully performed on cerium oxide (as a surrogate for plutonium oxide), surrogate electrorefining salts, surrogate residue sludge and residue ash. Future plans also include tests on ion exchange resins. In an attempt to further the usefullness of this technology, a mobile, self-contained microwave melting system is currently under development and expected to be operational at Rocky Flats Enviromental Technology Site by the 4th quarter of FY96

Quantitative Assessment of Aflatoxin (AFM1) in Milk Collected from Dairy Farms in Faisalabad, Pakistan

International Nuclear Information System (INIS)

Sajid, M.W.; Randhawa, M.A.; Zahoor, T.; Sultan, J.I.

2015-01-01

Milk contamination with aflatoxin (AFM1) is an issue of great concern in developing countries like Pakistan which demands a great attention. Milk constitutes an important part of human diet, particularly for the youngs. So, it is our utmost need to assess the presence of AFM1 in milk. In the present study assessment of AFM1 in milk collected from different dairy farms of Faisalabad was carried out using High Performance Liquid Chromatography (HPLC) equipped with Fluorescence detector. The results were compared with pre-established maximum residual limit (MRL) in order to evaluate the safety of milk for human consumption. The study revealed that all the 50 tested samples were found positive for AFM1 contamination at various levels. Among buffalo dairy farms concentration of AFM1 ranged between 0.0513 λg L-1 and 0.1006 μg L-1. From the cow dairy farms, the AFM1 contamination level was found lowest with a mean of 0.0397 μg L-1 and the highest AFM1 contamination level was with a mean of 0.1143 μg L-1. Overall percentage of AFM1 contamination and concentration levels were found higher in the milk collected from buffalo dairy farms as compared to cow dairy farms. 21 out of 25 (84 percentage) buffalo and 18 out of 25 (72 percentage) cow milk samples were exceeded the European Commission MRL of 0.050 mu g L-1. The results of the present study will be helpful for regulations implementation in order to minimize or avoid the AFM1 contamination in milk from the farms in the study area. (author)

Evaluation of residue-residue contact predictions in CASP9

KAUST Repository

Monastyrskyy, Bohdan; Fidelis, Krzysztof; Tramontano, Anna; Kryshtafovych, Andriy

2011-01-01

This work presents the results of the assessment of the intramolecular residue-residue contact predictions submitted to CASP9. The methodology for the assessment does not differ from that used in previous CASPs, with two basic evaluation measures

Dissipation of chlorantraniliprole, chlorpyrifos-methyl and indoxacarb-insecticides used to control codling moth (Cydia Pomonella L.) and leafrollers (Tortricidae) in apples for production of baby food.

Science.gov (United States)

Szpyrka, Ewa; Matyaszek, Aneta; Słowik-Borowiec, Magdalena

2017-05-01

Dissipations of three insecticides: chlorantraniliprole, chlorpyrifos-methyl and indoxacarb in apples were studied following their foliar application on apples intended for production of baby food. The apples were sprayed with formulations for control of codling moth (Cydia Pomonella L.) and leafrollers (Tortricidae). Six experiments were conducted; each insecticide was applied individually on dessert apples. A validated gas chromatography-based method with simultaneous electron capture and nitrogen-phosphorus detection (GC-ECD/NPD) was used for the residue analysis. The analytical performance of the method was satisfactory, with expanded uncertainties ≤36% (a coverage factor, k = 2, and a confidence level of 95%). The dissipations of insecticides were studied in pseudo-first-order kinetic models (for which the coefficient of determination, R 2 , ranged between 0.9188 and 0.9897). Residues of studied insecticides were below their maximum residue limits of 0.5 mg/kg at an early stage of growth of the fruit. The half-lives of chlorantraniliprole, chlorpyrifos-methyl and indoxacarb were 16-17, 4-6 and 20-24 days, respectively. The initial residue levels declined gradually and reached the level of 0.01 mg/kg in 1 month for chlorpyrifos-methyl, 2 months for chlorantraniliprole and 2.5 months for indoxacarb. To obtain the insecticide residue levels below 0.01 mg/kg, which is the default MRL for food intended for infants and young children, the application of the studied insecticides should be carried out at recommended doses not later then: 1 month before harvest for chlorpyrifos-methyl, 2 months for chlorantraniliprole and 2.5 months for indoxacarb.

A case study on toxicological aspects of the pest and disease control in the production of the high-quality raspberry (Rubus idaeus L.).

Science.gov (United States)

Sadło, Stanisław; Szpyrka, Ewa; Piechowicz, Bartosz; Grodzicki, Przemysław

2015-01-01

The field studies on the residue levels of the fungicides and insecticides used in commercial raspberry (Rubus idaeus L.) plantation have been performed. Starting on the first day of harvesting (on June 19), 20 laboratory samples of fruit, 10 laboratory samples of leaves and 4 samples of soil were analyzed and the residue levels were compared to the Maximum Residue Limits (MRL) and Acceptable Daily Intakes (ADI). All analyses were carried out using extraction method and gas chromatography technique. Esfenwalerate (Sumi-alpha 050 EC) and beta-cyfluthrin (Bulldock 025 EC), the insecticides belonging to the group of synthetic pyrethroids, were not found in harvested ripe fruits, while cypermethrin residues (Cyperkill 25 EC) applied on May 24, 25 days later was still found on low levels in fruits (0.026 mg kg(-1)) and in leaves (2.58 mg kg(-1)). In turn, residues of chlorpyrifos (Dursban 480 EC), applied to the soil on May 15 against the cockchafers Melolontha melolontha and Otiorhynchus sp., were found at the level 0.004 mg kg(-1). The content of pesticides in ripe fruits depended mainly on the dose and on the time that has elapsed from the date of their application and were as follows: boscalid -0.950, pyrimethanil -0.917, pyraclostrobin -0.253 cypermethrin -0.026 and chlorpyrifos -0.004 mg kg(-1) while in leaves: boscalid -30.64, pyrimethanil -8.13, pyraclostrobin -15.82, cypermethrin -2.58 and chlorpyrifos -0.15 mg kg(-1). The highest average daily intake was in the case of boscalid, and in fruits and leaves reached the levels 0.205 and 6.63, in total 0.33% and 12.18% of ADI, respectively.

Residual mercury content and leaching of mercury and silver from used amalgam capsules.

Science.gov (United States)

Stone, M E; Pederson, E D; Cohen, M E; Ragain, J C; Karaway, R S; Auxer, R A; Saluta, A R

2002-06-01

The objective of this investigation was to carry out residual mercury (Hg) determinations and toxicity characteristic leaching procedure (TCLP) analysis of used amalgam capsules. For residual Hg analysis, 25 capsules (20 capsules for one brand) from each of 10 different brands of amalgam were analyzed. Total residual Hg levels per capsule were determined using United States Environmental Protection Agency (USEPA) Method 7471. For TCLP analysis, 25 amalgam capsules for each of 10 brands were extracted using a modification of USEPA Method 1311. Hg analysis of the TCLP extracts was done with USEPA Method 7470A. Analysis of silver (Ag) concentrations in the TCLP extract was done with USEPA Method 6010B. Analysis of the residual Hg data resulted in the segregation of brands into three groups: Dispersalloy capsules, Group A, retained the most Hg (1.225 mg/capsule). These capsules were the only ones to include a pestle. Group B capsules, Valliant PhD, Optaloy II, Megalloy and Valliant Snap Set, retained the next highest amount of Hg (0.534-0.770 mg/capsule), and were characterized by a groove in the inside of the capsule. Group C, Tytin regular set double-spill, Tytin FC, Contour, Sybraloy regular set, and Tytin regular set single-spill retained the least amount of Hg (0.125-0.266 mg/capsule). TCLP analysis of the triturated capsules showed Sybraloy and Contour leached Hg at greater than the 0.2 mg/l Resource Conservation and Recovery Act (RCRA) limit. This study demonstrated that residual mercury may be related to capsule design features and that TCLP extracts from these capsules could, in some brands, exceed RCRA Hg limits, making their disposal problematic. At current RCRA limits, the leaching of Ag is not a problem.

Flanking signal and mature peptide residues influence signal peptide cleavage

Directory of Open Access Journals (Sweden)

Ranganathan Shoba

2008-12-01

Full Text Available Abstract Background Signal peptides (SPs mediate the targeting of secretory precursor proteins to the correct subcellular compartments in prokaryotes and eukaryotes. Identifying these transient peptides is crucial to the medical, food and beverage and biotechnology industries yet our understanding of these peptides remains limited. This paper examines the most common type of signal peptides cleavable by the endoprotease signal peptidase I (SPase I, and the residues flanking the cleavage sites of three groups of signal peptide sequences, namely (i eukaryotes (Euk (ii Gram-positive (Gram+ bacteria, and (iii Gram-negative (Gram- bacteria. Results In this study, 2352 secretory peptide sequences from a variety of organisms with amino-terminal SPs are extracted from the manually curated SPdb database for analysis based on physicochemical properties such as pI, aliphatic index, GRAVY score, hydrophobicity, net charge and position-specific residue preferences. Our findings show that the three groups share several similarities in general, but they display distinctive features upon examination in terms of their amino acid compositions and frequencies, and various physico-chemical properties. Thus, analysis or prediction of their sequences should be separated and treated as distinct groups. Conclusion We conclude that the peptide segment recognized by SPase I extends to the start of the mature protein to a limited extent, upon our survey of the amino acid residues surrounding the cleavage processing site. These flanking residues possibly influence the cleavage processing and contribute to non-canonical cleavage sites. Our findings are applicable in defining more accurate prediction tools for recognition and identification of cleavage site of SPs.

Analysis of fenbendazole residues in bovine milk by ELISA.

Science.gov (United States)

Brandon, David L; Bates, Anne H; Binder, Ronald G; Montague, William C; Whitehand, Linda C; Barker, Steven A

2002-10-09

Fenbendazole residues in bovine milk were analyzed by ELISAs using two monoclonal antibodies. One monoclonal antibody (MAb 587) bound the major benzimidazole anthelmintic drugs, including fenbendazole, oxfendazole, and fenbendazole sulfone. The other (MAb 591) was more specific for fenbendazole, with 13% cross-reactivity with the sulfone and no significant binding to the sulfoxide metabolite. The limit of detection of the ELISA method in the milk matrix was 7 ppb for MAb 587 and 3 ppb for MAb 591. Fenbendazole was administered in feed, drench, and paste form to three groups of dairy cattle. Milk was collected immediately before dosing and then every 12 h for 5 days. The ELISA indicated that residue levels varied widely among individual cows in each group. Fenbendazole levels peaked at approximately 12-24 h and declined rapidly thereafter. Metabolites were detected at much higher levels than the parent compound, peaked at approximately 24-36 h, and declined gradually. Residue levels were undetectable by 72 h. The ELISA data correlated well with the total residues determined by chromatographic analysis, but the use of the two separate ELISAs did not afford an advantage over ELISA with the single, broadly reactive MAb 587. The ELISA method could be used to flag high-residue samples in on-site monitoring of fenbendazole in milk and is a potential tool for studying drug pharmacokinetics.

Pyrethroids in chicken eggs from commercial farms and home production in Rio de Janeiro: Estimated daily intake and diastereomeric selectivity.

Science.gov (United States)

Parente, Cláudio E T; Lestayo, Julliana; Guida, Yago S; Azevedo-Silva, Claudio E; Torres, João Paulo M; Meire, Rodrigo O; Malm, Olaf

2017-10-01

In this study, pyrethroids were determined in chicken eggs from commercial farm (n = 60) and home egg production (n = 30). These pyrethroids were investigated: bifenthrin, phenothrin, permethrin, cyfluthrin, cypermethrin and fenvalerate, including most diastereomers. Quantification was done using GC-MS in a negative chemical ionization mode. Pyrethroids residues were found in 79% of the analyzed samples. Cypermethrin presented the highest occurrence, being quantified in 62 samples (69%) in concentrations (lipid weight - l w.) varying between 0.29 and 6408 ng g -1 , followed by phenothrin (24%), 21-3910 ng g -1 , permethrin (14%), 2.96-328 ng g -1 , and bifenthrin (11%), 3.77-16.7 ng g -1 . Cyfluthrin and fenvalerate were not detected. Home-produced eggs had a higher occurrence of pyrethroids (97%), with a greater predominance of phenothrin. In commercial production, 70% of the samples presented pyrethroid residues (predominantly cypermethrin). This is the first report about the presence of pyrethroids in home-produced eggs and the first description of a selectivity pattern with the predominance of cis diastereomers in chicken eggs. In general, estimated daily intake does not present a risk to human consumption, according to Brazilian and international standards (FAO/WHO). However, one third of the samples (30 eggs) had concentrations above the maximum residue limits (MRLs). The maximum cypermethrin concentration was 66 times the MRL, while the maximum phenothrin concentration was 11 times the limit. Further studies about transfer dynamics, bioaccumulation and metabolic degradation of stereoisomers are required, as well as determining if this selectivity pattern in food can increase consumer's health risk. Copyright © 2017 Elsevier Ltd. All rights reserved.

Radiotracer studies on the fate and transformation of pesticide residues in the environment and food chains. Part of a coordinated programme on isotopic-tracer-aided studies of chemical residues in cotton seed, feed, oil and related products

International Nuclear Information System (INIS)

Lee, S.R.

1980-10-01

The magnitude and fate of some pesticide chemicals in Korean foods were studied with particular reference to oil-bearing crops and related products. Application of the chemicals was made under conditions of actual agricultural practice. Analytical methodologies included nuclear activation, gas chromatographic, spectrophotometric and radiotracer techniques. Residues of benzene hexachloride, heptachlor, heptachlor epoxide, aldrin, dieldrin, endrin and DDT found in refined vegetable oil samples were below or within the tolerance limits set by international organizations and as such, these are unlikely to present any toxicological hazard to the consumer. Also, residues of the herbicides nitrogen, alachlor and butachlor applied to oil-bearing crops were not detected in the seeds. Studies on 14 C-BHC residues in rice revealed that polishing and washing play an important role in removing a considerable portion of the residue. Data on the arsenic-containing neoasozine residues suggest that the products consumed by the human (grain and oil) contained residues below the tolerance limit and are unlikely to present any toxicological hazard to the consumer. On the other hand, relatively high arsenic concentrations (2.2 mg/kg) were found in the cake (serving as animal feed) and should be carefully evaluated in the light of toxicological data

Impact of a proposed revision of the IESTI equation on the acute risk assessment conducted when setting maximum residue levels (MRLs) in the European Union (EU): A case study.

Science.gov (United States)

Breysse, Nicolas; Vial, Gaelle; Pattingre, Lauriane; Ossendorp, Bernadette C; Mahieu, Karin; Reich, Hermine; Rietveld, Anton; Sieke, Christian; van der Velde-Koerts, Trijntje; Sarda, Xavier

2018-06-03

Proposals to update the methodology for the international estimated short-term intake (IESTI) equations were made during an international workshop held in Geneva in 2015. Changes to several parameters of the current four IESTI equations (cases 1, 2a, 2b, and 3) were proposed. In this study, the overall impact of these proposed changes on estimates of short-term exposure was studied using the large portion data available in the European Food Safety Authority PRIMo model and the residue data submitted in the framework of the European Maximum Residue Levels (MRL) review under Article 12 of Regulation (EC) No 396/2005. Evaluation of consumer exposure using the current and proposed equations resulted in substantial differences in the exposure estimates; however, there were no significant changes regarding the number of accepted MRLs. For the different IESTI cases, the median ratio of the new versus the current equation is 1.1 for case 1, 1.4 for case 2a, 0.75 for case 2b, and 1 for case 3. The impact, expressed as a shift in the IESTI distribution profile, indicated that the 95th percentile IESTI shifted from 50% of the acute reference dose (ARfD) with the current equations to 65% of the ARfD with the proposed equations. This IESTI increase resulted in the loss of 1.2% of the MRLs (37 out of 3110) tested within this study. At the same time, the proposed equations would have allowed 0.4% of the MRLs (14 out of 3110) that were rejected with the current equations to be accepted. The commodity groups that were most impacted by these modifications are solanacea (e.g., potato, eggplant), lettuces, pulses (dry), leafy brassica (e.g., kale, Chinese cabbage), and pome fruits. The active substances that were most affected were fluazifop-p-butyl, deltamethrin, and lambda-cyhalothrin.

Dermal insecticide residues from birds inhabiting an orchard

Science.gov (United States)

Vyas, N.B.; Spann, J.W.; Hulse, C.S.; Gentry, S.; Borges, S.L.

2007-01-01

The US Environmental Protection Agency conducts risk assessments of insecticide applications to wild birds using a model that is limited to the dietary route of exposure. However, free-flying birds are also exposed to insecticides via the inhalation and dermal routes. We measured azinphos-methyl residues on the skin plus feathers and the feet of brown-headed cowbirds (Molothrus ater) in order to quantify dermal exposure to songbirds that entered and inhabited an apple (Malus x domestica) orchard following an insecticide application. Exposure to azinphos-methyl was measured by sampling birds from an aviary that was built around an apple tree. Birds sampled at 36 h and 7-day post-application were placed in the aviary within 1 h after the application whereas birds exposed for 3 days were released into the aviary 4-day post-application. Residues on vegetation and soil were also measured. Azinphos-methyl residues were detected from the skin plus feathers and the feet from all exposure periods. Our results underscore the importance of incorporating dermal exposure into avian pesticide risk assessments.

Asphalts tests using onshore drilling oil wells residues; Ensaios asfalticos utilizando residuos de perfuracao onshore

Energy Technology Data Exchange (ETDEWEB)

Lucena, Adriano Elisio de F.L.; Rodrigues, John Kennedy G.; Ferreira, Heber Carlos; Lucena, Leda Christiane de F.L. [Universidade Federal de Campina Grande (UFCG), PB (Brazil); Lucena, Luciana de F.L. [Faculdade de Ciencias Sociais Aplicada (FACISA), Campina Grande, PB (Brazil)

2008-07-01

The drilling cuttings are one of the residues produced by the oils industries in large amounts during the drilling of oil wells. An alternative of final disposal of the drilling cutting residue is its utilization in asphalt mixtures. Based on this alternative, it was realized chemical and granulometric analysis and tests (Marshall and indirect tensile strength), on the asphaltic mixture using the residue from the oil drilling wells (well: 1-POTI-4-RN, located at Governador DIX-Sept Rosado - RN - Brazil). The achieved results to Marshall test indicated that for the analyzed mixture, the ideal content of residue that can be incorporated to the asphaltic composition and attend at the DNIT-ES 31 (2006) is 5%. To the indirect tensile strength test, the results showed a strength value higher than the minimum limit requested by the DNIT (0,65 MPa). The achieved results indicated the possibility of the utilization of the drilling cuttings in asphaltic pavements as fine aggregate, obeying the percentage limits, as an alternative to the final disposal. (author)

Ammonia volatilization from crop residues and frozen green manure crops

NARCIS (Netherlands)

Ruijter, de F.J.; Huijsmans, J.F.M.; Rutgers, B.

2010-01-01

Agricultural systems can lose substantial amounts of nitrogen (N). To protect the environment, the European Union (EU) has adopted several directives that set goals to limit N losses. National Emission Ceilings (NEC) are prescribed in the NEC directive for nitrogen oxides and ammonia. Crop residues

Matrix-Matching as an Improvement Strategy for the Detection of Pesticide Residues.

Science.gov (United States)

Giacinti, Géraldine; Raynaud, Christine; Capblancq, Sophie; Simon, Valérie

2016-05-01

More than 90% of the pesticides residues in apples are located in the peel. We developed a gas chromatography/ion trap tandem mass spectrometry method for investigating all detectable residues in the peel of 3 apple varieties. Sample preparation is based on the use of the Quick Easy Cheap Effective Rugged and Safe method on the whole fruit, the flesh, and the peel. Pesticide residues were quantified with solvent-matched and matrix-matched standards, by spiking apple sample extracts. Matrix effects dependent on the type of extract (fruit, flesh, or peel) and the apple variety were detected. The best data processing methods involved normalizing matrix effect rates by matrix-matched internal/external calibration. Boscalid, captan, chlorpyrifos, fludioxonil, and pyraclostrobin were the most frequently detected pesticides. However, their concentrations in the whole fruit were below European maximum residue levels. Despite negative matrix effects, the residues in peel were detected at concentrations up to 10 times higher than those in whole fruits. Consequently, other pesticide residues present at concentrations below the limit of quantification in the whole fruit were detected in the peel. © 2016 Institute of Food Technologists®

The significance of residual stresses in relation to the integrity of LWR pressure vessels

International Nuclear Information System (INIS)

Lidbury, D.P.G.

1984-01-01

The level and distribution of residual stresses in heavy section weldments and the factors affecting their relaxation with post-weld heat treatment (PWHT) are discussed; residual stresses are also considered in relation to the deposition of austenitic strip cladding and repair welding. A brief survey is made of currently available methods of measuring surface and sub-surface residual stresses in heavy section weldments; the effects of compressive residual stresses on the detection and sizing of planar defects are similarly considered. Available fracture mechanics methodologies with the capability of evaluation defect significance in the presence of residual and other secondary stresses are reviewed in some detail. On-going experimental investigations of the effects of residual stresses on structural integrity are also described. Following a general discussion, the desirability of internationally agreed Codes and Methods for assessing defects in the presence of residual and other self-limiting stresses is pointed out. It is argued that before such agreement could be achieved, however, further work is necessary, and a number of recommendations are given. (author)

Rigid Residue Scan Simulations Systematically Reveal Residue Entropic Roles in Protein Allostery.

Directory of Open Access Journals (Sweden)

Robert Kalescky

2016-04-01

Full Text Available Intra-protein information is transmitted over distances via allosteric processes. This ubiquitous protein process allows for protein function changes due to ligand binding events. Understanding protein allostery is essential to understanding protein functions. In this study, allostery in the second PDZ domain (PDZ2 in the human PTP1E protein is examined as model system to advance a recently developed rigid residue scan method combining with configurational entropy calculation and principal component analysis. The contributions from individual residues to whole-protein dynamics and allostery were systematically assessed via rigid body simulations of both unbound and ligand-bound states of the protein. The entropic contributions of individual residues to whole-protein dynamics were evaluated based on covariance-based correlation analysis of all simulations. The changes of overall protein entropy when individual residues being held rigid support that the rigidity/flexibility equilibrium in protein structure is governed by the La Châtelier's principle of chemical equilibrium. Key residues of PDZ2 allostery were identified with good agreement with NMR studies of the same protein bound to the same peptide. On the other hand, the change of entropic contribution from each residue upon perturbation revealed intrinsic differences among all the residues. The quasi-harmonic and principal component analyses of simulations without rigid residue perturbation showed a coherent allosteric mode from unbound and bound states, respectively. The projection of simulations with rigid residue perturbation onto coherent allosteric modes demonstrated the intrinsic shifting of ensemble distributions supporting the population-shift theory of protein allostery. Overall, the study presented here provides a robust and systematic approach to estimate the contribution of individual residue internal motion to overall protein dynamics and allostery.

Occurrence of ochratoxin A in poultry feeds and feed ingredients from Pakistan.

Science.gov (United States)

Sherazi, S T H; Shar, Z H; Sumbal, G A; Tan, Eddie T; Bhanger, M I; Kara, Huseyin; Nizamani, S M

2015-02-01

A study was conducted to evaluate the occurrence of ochratoxin A (OTA) in complete poultry feeds (n=80) and poultry feed ingredients (n=286) from Pakistan. All samples were first analyzed by indirect enzyme linked immunosorbent assay (ELISA), samples with OTA concentrations above the European Union maximum regulatory limit (MRL, 100 μg/kg) were further confirmed by HPLC-FLD. Contamination frequency and mean OTA levels were 31% and 51 μg/kg in feed ingredients, and the corresponding values for complete feeds were 38% and 75 μg/kg. Ten samples of complete poultry feed and 19 samples of feed ingredients contained OTA at levels higher than the MRL. The results of the present study indicate that there is a strong need for a more intense monitoring programs for OTA in poultry feed.

Expression of a new laccase from Moniliophthora roreri at high levels in Pichia pastoris and its potential application in micropollutant degradation.

Science.gov (United States)

Bronikowski, Agathe; Hagedoorn, Peter-Leon; Koschorreck, Katja; Urlacher, Vlada B

2017-12-01

Laccases have gained significant attention due to their emerging applications including bioremediation, biomass degradation and biofuel cells. One of the prerequisites for the industrial application of laccases is their sufficient availability. However, expression levels of recombinantly expressed laccases are often low. In this study Mrl2, a new laccase from the basidiomycete Moniliophthora roreri, was cloned in Pichia pastoris and produced in an optimized fed-batch process at an exceptionally high yield of 1.05 g l -1 . With a redox potential of 0.58 V, Mrl2 belongs to mid-redox potential laccases. However, Mrl2 demonstrated high k cat values of 316, 20, 74, and 36 s -1 towards 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS), syringaldazine (SGZ), 2,6-dimethoxyphenol (2,6-DMP) and guaiacol, respectively. Mrl2 remained stable above pH 6 and in the presence of many metal ions, which is important for application in bioremediation. Mrl2 was investigated for the ability to degrade endocrine disrupting chemicals (EDCs) and non-steroidal anti-inflammatory drugs (NSDAIs) at neutral pH value. The enzyme accepted and converted estrone, 17β-estradiol, estriol, the synthetic contraceptive 17α-ethinyl estradiol and bisphenol A at pH 7 faster than high-potential laccases from Trametes versicolor. For example, within 30 min Mrl2 removed more than 90% bisphenol A, 17ß-estradiol, 17α-ethinyl estradiol and estriol, respectively. The concentration of the recalcitrant drug diclofenac dropped by 56% after 20 h incubation with Mrl2.

A Note on the Inverse Reconstruction of Residual Fields in Surface Peened Plates

Directory of Open Access Journals (Sweden)

S. Ali Faghidian

Full Text Available Abstract A modified stress function approach is developed here to reconstruct induced stress, residual stress and eigenstrain fields from limited experimental measurements. The present approach is successfully applied to three experimental measurements set in surface peened plates with shallow shot peening affected zone. The well-rehearsed advantage of the proposed approach is that it not only minimizes the deviation of measurements from its approximations but also will result in an inverse solution satisfying a full range of continuum mechanics requirements. Also, the effect of component thickness as a geometric parameter influencing the residual stress state is comprehensively studied. A key finding of present study is that the plate thickness has no influence on the maximum magnitude of eigenstrain profile and compressive residual stresses within the shot peening affected zone while having a great influence on the magnitude of tensile residual stress and the gradient of linear residual stresses present in deeper regions.

Pesticide residues in orange fruit from citrus orchards in Nuevo Leon State, Mexico.

Science.gov (United States)

Suárez-Jacobo, Angela; Alcantar-Rosales, Victor Manuel; Alonso-Segura, Diana; Heras-Ramírez, Maria; Elizarragaz-De La Rosa, Dalau; Lugo-Melchor, Ofelia; Gaspar-Ramirez, Octavio

2017-09-01

Some international organisations established maximum residue limits (MRLs) in food to protect human health. Mexico lacks regulations in this matter, affecting national and international trade from agroindustry. The aim of this study was to diagnose pesticide residues in oranges from Nuevo Leon, México, in citrus orchards. In May 2014, 100 orange fruit samples were taken randomly from orchards and subjected to analysis for 93 pesticides at residual level by GC/QQQ-MS and LCQ-TOF-MS. Results showed the presence of 15 pesticide residues in the samples. The comparison of the residual levels of pesticides found in orange samples among the MRLs allowed by USA, EU and Japanese regulations demonstrated that all samples were below MRLs issued by USA and Japan. Some orange samples were above MRLs issued by the EU. This provides a basis to establish strategies in order to satisfy International Standards to protect human health and encourage Food Safety in Mexico.

Statistically generated weighted curve fit of residual functions for modal analysis of structures

Science.gov (United States)

Bookout, P. S.

1995-01-01

A statistically generated weighting function for a second-order polynomial curve fit of residual functions has been developed. The residual flexibility test method, from which a residual function is generated, is a procedure for modal testing large structures in an external constraint-free environment to measure the effects of higher order modes and interface stiffness. This test method is applicable to structures with distinct degree-of-freedom interfaces to other system components. A theoretical residual function in the displacement/force domain has the characteristics of a relatively flat line in the lower frequencies and a slight upward curvature in the higher frequency range. In the test residual function, the above-mentioned characteristics can be seen in the data, but due to the present limitations in the modal parameter evaluation (natural frequencies and mode shapes) of test data, the residual function has regions of ragged data. A second order polynomial curve fit is required to obtain the residual flexibility term. A weighting function of the data is generated by examining the variances between neighboring data points. From a weighted second-order polynomial curve fit, an accurate residual flexibility value can be obtained. The residual flexibility value and free-free modes from testing are used to improve a mathematical model of the structure. The residual flexibility modal test method is applied to a straight beam with a trunnion appendage and a space shuttle payload pallet simulator.

HPLC residues of enrofloxacin and ciprofloxacin in eggs of laying hens.

Science.gov (United States)

Gorla, N; Chiostri, E; Ugnia, L; Weyers, A; Giacomelli, N; Davicino, R; García Ovando, H

1997-05-01

Eggs of 12 laying hens with 5 mg/kg/day oral administration of 5% enrofloxacin (EFX) or ciprofloxacin (CFX) solution during 5 days contained residues from 0.02 to 1.98 microg/g (EFX) or 0.14 to 0.28 microg/g (CFX). At identical dosage regime High Performance Liquid Chromatograhy (HPLC) residues of EFX were 6-fold greater than CFX ones. Maximun concentrations were detected at the second day after the administration withdrawal. The limits of detection were 0.019 microg/g for EFX and 0.156 microg/g for CFX. The recovery was 36-50% for CFX and 49-85% for EFX. The withdrawal treatment periods in hens are six days for EFX and five days for CFX in order to avoid violative levels of egg residues.

Determinación de residuos de plaguicidas órgano fosforados en muestras de tomate

Directory of Open Access Journals (Sweden)

Paola A. Castro

2004-11-01

Full Text Available Se estudió la presencia de residuos de diez plaguicidas organofosforados (POPs en tomates adquiridos en la central de abastos y en una cadena de supermercados de Bogotá, usando extracción líquido-líquido (LLE y determinación analítica mediante un equipo de Cromatografía de Gases de Alta Resolución (HRGC - Detector Fotométrico de Llama (FPD. Los plaguicidas analizados fueron: Clorfevinfos, Clorpirifos, Demeton O, Demeton S, Diclorofentión, Dimetoato, Famfur, Leptofos, Metilparation y Triclorfon. Se analizaron diez muestras obtenidas en la central mayoritaria de abastos y ocho muestras de una cadena de supermercados de las cuales el 55% presentó contaminación con Dimetoato, aunque ninguna sobrepasó el límite máximo de residuos (LMR de 1 mg/kg establecido por el Codex alimentario. También se encontraron residuos de Metilparatíon y Clorfevinfos, en ambos casos dentro de los límites permitidos. / The presence of ten organophosphorus pesticides was studied in tomatoes acquired from markets in Bogotá (Colombia, using Liquid-liquid Extraction (LLE and High Resolution Gas Chromatography (HRGC with flame photometric detector (FPD. The pesticides analyzed were: Chlorfevinphos, Chlorpyrifos, Demeton O, Demeton S, Dichlofenthion, Dimethoate, Famphur, Leptophos and Trichlorfon. Eighteen samples were analyzed in which fifty five percent were contaminated with Dimethoate. Dimethoate levels in the contaminated samples were below the maximun residue levels (MRL of 1 mg/kg established by the Codex alimentarius. Residues of Methyl parathion and Chlorfevinphos were also found, below the MRL.

Multiresidue analysis of 47 pesticides in cooked wheat flour and polished rice by liquid chromatography with tandem mass spectrometry.

Science.gov (United States)

Lee, Sung Jung; Park, Hyeong Jin; Kim, Wooseong; Jin, Jong Sung; Abd El-Aty, A M; Shim, Jae-Han; Shin, Sung Chul

2009-04-01

Liquid chromatography in conjunction with tandem mass spectrometry was used to directly quantify of 47 pesticide residues from cooked wheat flour and polished rice, which are the most widely consumed cereals in the Republic of Korea. The sample clean-up was carried out according to the method established by the Korea Food and Drug Administration. The mobile phase for liquid chromatography separation consisted of water and 5 mm methanolic ammonium formate. Tandem mass spectroscopy experiments were performed in electrospray ionization positive mode and the multiple reaction monitoring mode. The matrix effects estimated for the 47 pesticides had a mean value of 99% and ranged from 45 to 147%. High recoveries (70-140%) and relative standard deviations (flour and polished rice samples. Of the screened pesticide residues, only tricyclazole and fenobucarb were found in polished rice samples. However, no samples contained residues above the MRL established by the Korea Food and Drug Administration.

Pesticide Residues in Commercial Lettuce, Onion, and Potato Samples From Bolivia—A Threat to Public Health?

DEFF Research Database (Denmark)

Skovgaard, Marlene; Renjel, Susana; Jensen, Olaf Chresten

2017-01-01

lettuce samples from La Paz were sampled on August 15, 2015 at a local market and screened for 283 pesticides. Residues of cypermethrin, chlorpyrifos, difenoconazol, or/and λ-cyhalothrin were detected in 50% of the lettuce samples, whereas no pesticides were found in potatoes and onions. In 20......% of the lettuce samples, the measurements were above the maximum residue limits, and 2 or 3 pesticides were identified simultaneously. Washing almost halved the pesticide levels, but still 20% of the samples showed measurements above the limits. No samples contained concentrations of pesticides which alone...

Methodology for determination of benzimidazolic fungicides residues in strawberry and lettuce by HPLC-DAD

International Nuclear Information System (INIS)

Dangond Araujo, Jose Jairo; Guerrero dallos, Jairo Arturo

2006-01-01

systemic fungicides like benzimidazolic compounds are used to protect several crops of fruits and vegetables. in this work a new method for analysis of Benomyl, carbendazim and thiabendazol in strawberry and lettuce by high performance liquid chromatography with diode array detector (HPLC-DAD) was validated. benomyl residues were determined after its conversion to carbendazim. pesticide residues were extracted from strawberry and lettuce samples with ethyl acetate and these extracts were cleaned up by gel permeation chromatography (GPC). final determination was carried out by HPLC-DAD in reverse phase column. the method is selective, specific, precise and accurate. the calibration curves show linearity over concentration range of 1.24 to 6.19 mg/kg, with detection limits of 0.40 and 0.27 mg/kg and quantification limits of 1.35 and 0.81 mg/kg for carbendazim and thiabendazole respectively. the recovery experiments yielding averages of 90 %. n o residues of these compounds were found in collected samples from specific areas of Cundinamarca, Colombia

Residue analysis of orthosulfamuron herbicide in fatty rice using liquid chromatography–tandem mass spectrometry

Directory of Open Access Journals (Sweden)

Young-Jun Lee

2015-05-01

Full Text Available In the present study, orthosulfamuron residues were extracted from fatty (unpolished rice and rice straw using a modified QuEChERS method and analyzed using liquid chromatography–tandem mass spectrometry. The matrix-matched calibration was linear over the concentration ranges of 0.01–2.0 mg/kg with determination coefficient (R2 ⩾ 0.997. The recovery rates at two fortification levels (0.1 and 0.5 mg/kg were satisfactory and ranged between 88.1% and 100.6%, with relative standard deviation (RSD <8%. The limit of quantitation, 0.03 mg/kg, was lower than the maximum residue limit, 0.05 mg/kg, set by the Ministry of Food and Drug Safety in the Republic of Korea. The developed method was applied successfully to field samples harvested at 116 days and none of the samples were positive for the residue.

Residual gas analysis

International Nuclear Information System (INIS)

Berecz, I.

1982-01-01

Determination of the residual gas composition in vacuum systems by a special mass spectrometric method was presented. The quadrupole mass spectrometer (QMS) and its application in thin film technology was discussed. Results, partial pressure versus time curves as well as the line spectra of the residual gases in case of the vaporization of a Ti-Pd-Au alloy were demonstrated together with the possible construction schemes of QMS residual gas analysers. (Sz.J.)

Detection limits of antimicrobials in ewe milk by delvotest photometric measurements.

Science.gov (United States)

Althaus, R L; Torres, A; Montero, A; Balasch, S; Molina, M P

2003-02-01

The Delvotest method detection limits per manufacturer's instructions at a fixed reading time of 3 h for 24 antimicrobial agents were determined in ewe milk by photometric measurement. For each drug, eight concentrations were tested on 20 ewe milk samples from individual ewes. Detection limits, determined by means of logistic regression models, were (microg/kg): 3, amoxycillin; 2, ampicillin; 18, cloxacillin; 1, penicillin "G"; 34, cefadroxil; 430, cephalosporin "C"; 40, cephalexin; 20, cefoperazone; 33, Ceftiofur; 18, cefuroxime; 6100, streptomycin; 1200, gentamycin; 2600, neomycin; 830, erythromycin; 100, tylosin; 180, doxycycline; 320, oxytetracycline; 590, tetracycline; 88, sulfadiazine; 44, sulfamethoxazole; 140, sulfametoxypyridazine; 48, sulfaquinoxaline; 12,000, chloramphenicol; and 290, trimethoprim. Whereas the beta-lactam antibiotics, sulphonamides, and tylosin were detected by Delvotest method at levels equal to those of maximum residue limits, its sensitivity needs to be enhanced to detect aminoglycosides, tetracyclines, streptomycin, chloramphenicol, and trimethoprim residues in ewe milk or to develop an integrated residue detection system for ewe milk with different sensitive microorganisms for each group of antiinfectious agents.

Effect of residual stresses on fatigue strength of plasma nitrided 4140 steel

International Nuclear Information System (INIS)

Aghazadeh, J.; Amidi, M.R.

2004-01-01

Almost every method that has been presented to determine residual stress has some limitation and complexities. The aim of this work is to present a new, yet simple method so called strain indentation for measuring the residual stresses particularly in thin layers. In this method in addition to the precision measurements, components of residual stress at different directions may be determined. AISI 4140 steel specimens nitrided at 350 d ig C , 450 d ig C and 550 d ig C for 5 hours in the mixture of 75% nitrogen- 25% hydrogen gas. The, components of residual stress in the radials axial and hoop directions in the nitrided layer were determined considering the elastic strain recovery after removal of residual stress inducer(i.e. the nitrided layer). Fatigue strength of the nitrided specimens was obtained by plotting the S-N curves and fractographic studies carried out on the fracture surface of the specimens. The effect of residual stress on the stress pattern was simulated. The calculated residual stress components were in the range of 40-210 Mpa and the radial components of residual stress were more than the other two directions. Maximum fatigue strength improvement of up to 110% was observed in the plasma nitrided specimens at 550 d ig C and also 40% improvement in fatigue strength was detected by increasing the nitriding temperature from 350 d ig C to 550 d ig C . This was due to 100% increase in residual stress. Fatigue crack growth velocity in the hoop direction was more than that of radial direction. This seems to be due to higher radial residual stress component compared with the hoop stress component in the sub layer

Assessing the Availability of Wood Residues and Residue Markets in Virginia

OpenAIRE

Alderman, Delton R. Jr.

1998-01-01

A statewide mail survey of primary and secondary wood product manufacturers was undertaken to quantify the production and consumption of wood residues in Virginia. Two hundred and sixty-six wood product manufacturers responded to the study and they provided information on the production, consumption, markets, income or disposal costs, and disposal methods of wood residues. Hardwood and pine sawmills produce approximately 66 percent of Virginia's wood residues. Virginia's wood product man...

A novel biaxial specimen for inducing residual stresses in thermoset polymers and fibre composite material

DEFF Research Database (Denmark)

Jakobsen, Johnny; Andreasen, Jens Henrik; Jensen, Martin

2015-01-01

engineers when they challenge the material limits in present and future thermoset and composite component. In addition to the new specimen configuration, this paper presents an analytical solution for the residual stress state in the specimen. The analytical solution assumes linear elastic and isotropic......A new type of specimen configuration with the purpose of introducing a well-defined biaxial residual (axisymmetric) stress field in a neat thermoset or a fibre composite material is presented. The ability to experimentally validate residual stress predictions is an increasing need for design...

Nitrous oxide and N-leaching losses from agricultural soil: Influence of crop residue particle size, quality and placement

DEFF Research Database (Denmark)

Ambus, P.; Jensen, E.S.; Robertson, G.P.

2001-01-01

protection of the crop residue material against microbial attack. Leaching of N tended to be reduced about 40 % with barley and 20 % with pea, but the numbers were not significantly different from residue-free soil, which leached 4.7-4.9 g N m(-2). When wheat and alfalfa residues were mixed into the soil N2O...... emissions increased 6.5 and 1.6 times, respectively, compared with residue placed in a layer. Wheat residue in a layer evolved 3.4-times less N2O than alfalfa in a layer, whereas when mixed the two residue types evolved similar amounts of N2O. This difference was probably due to N-limitations in localised...

Zoopharmacognosy in diseased laboratory mice: conflicting evidence.

Directory of Open Access Journals (Sweden)

Minesh Kapadia

Full Text Available Zoopharmacognosy denotes a constellation of learned ingestive responses that promote healing and survival of infected or poisoned animals. A similar self-medication phenomenon was reported in diseased laboratory rodents. In particular, a series of studies revealed that autoimmune MRL/lpr mice readily consume solutions paired or laced with cyclophosphamide (CY, an immunosuppressive drug that prevents inflammatory damage to internal organs. However, due to design limitations, it could not be elucidated whether such a response reflects the learned therapeutic effect of CY, or a deficit in sensory input. We presently assess the behavioural effects of prolonged consumption of CY-laced, 16% sucrose solution in a continuous choice paradigm, with tap water available ad lib. Contrary to overall expectation, MRL/lpr mice did not increase their intake of CY with disease progression. Moreover, they ingested lower doses of CY and preferred less CY-laced sucrose solution than age-matched controls. The results obtained could not confirm zoopharmacognosy in diseased MRL/lpr mice, likely due to impaired responsiveness to palatable stimulation, or attenuated survival mechanisms after prolonged inbreeding in captivity. However, by revealing the effectiveness of unrestricted drinking of drug-laced sucrose solution on behavior and immunity, the current study supports broader use of such an administration route in behavioural studies sensitive to external stressors.

Development of irradiation technique on degradation residue of pesticide veterinary drugs and mycotoxins in food

International Nuclear Information System (INIS)

He Jiang; Huang Min; Chen Hao; Wu Ling; Gao Peng; Wang Yan; Lei Qing

2011-01-01

Irradiation technology is a new processing technology, It was widely used in food, medicines and medical supplies, chemical and other industries. In this paper, illustrated their applications in the degradation of pesticides, veterinary drugs and mycotoxins aspects residual pollution in food. Analysis of residual contaminants in food irradiation control study limitations and look forward to the prospect of food irradiation technology. (authors)

Mutational properties of amino acid residues: implications for evolvability of phosphorylatable residues

DEFF Research Database (Denmark)

Creixell, Pau; Schoof, Erwin M.; Tan, Chris Soon Heng

2012-01-01

in terms of their mutational activity. Moreover, we highlight the importance of the genetic code and physico-chemical properties of the amino acid residues as likely causes of these inequalities and uncover serine as a mutational hot spot. Finally, we explore the consequences that these different......; it is typically assumed that all amino acid residues are equally likely to mutate or to result from a mutation. Here, by reconstructing ancestral sequences and computing mutational probabilities for all the amino acid residues, we refute this assumption and show extensive inequalities between different residues...... mutational properties have on phosphorylation site evolution, showing that a higher degree of evolvability exists for phosphorylated threonine and, to a lesser extent, serine in comparison with tyrosine residues. As exemplified by the suppression of serine's mutational activity in phosphorylation sites, our...

Analytical solutions for peak and residual uplift resistance of pipelines

Energy Technology Data Exchange (ETDEWEB)

Nixon, J.F. [Nixon Geotech Ltd., Calgary, AB (Canada); Oswell, J.M. [Naviq Consulting Inc., Calgary, AB (Canada)

2010-07-01

Frost heave can occur on cold pipelines that traverse unfrozen, non permafrost terrain. The stresses experienced by the pipeline are partly a function of the strength of the soil on the non heaving side of the frozen-unfrozen interface. This paper proposed three analytical solutions to estimate the soil uplift resistance by considering the pipeline and soil to act similar to a strip footing, a punching shear failure, and by considering the formation of horizontal crack emanating from the spring line of the pipe. Peak uplift resistance and residual uplift resistance were discussed. Results for full scale pipe and for laboratory scale model pipes were presented, with particular reference to cover depth, temperature and crack width; and limits to residual uplift resistance. It was concluded that the peak uplift resistance and the residual uplift resistance are generally independent and controlled by different factors. The peak resistance is related directly to pipe diameter, and less strongly dependent on springline depth. It is also strongly dependent on soil temperature. However, the residual uplift resistance is strongly dependent on burial depth, weakly dependent on pipe displacement rate and also on soil temperature. 15 refs., 19 figs.

Study On The Procedures For Determining Of Pesticide Residues In Green Vegetables

International Nuclear Information System (INIS)

Le Tat Mua; Nguyen Tien Dat; Nguyen Van Minh; Nguyen Ngoc Tuan; Le Thi Ngoc Trinh; Ta Thi Tuyet Nhung; Truong Van Tai; Tran Thanh Nha; Nguyen Thi Hong Tham

2007-01-01

Researches presented in this work are divided into two main parts. One part embraces the residue analytical methods. The other part comprises applying of these residue analytical methods for analysis of plant material. Part I: Residue analytical methods (Analytical procedures): Determination of Endosulphan in plant material by GC/ECD; Determination of Methamidofos in plant material by GC/FTD; Determination of Deltamethrin, Cyhalothrin, Cyfluthrin in plant material by GC/ECD; Determination of Maneb in plant material by HPLC/UV; Determination of Zineb in plant material by F-AAS; Determination of Organo-Asenic and Mercury in plant material by RNAA; The limits of detection and determination (LOD, LOQ), Recovery, Efficiency, the Calibration curve are validated. Part II: Applying of Residue Analytical Methods for analysis of endosulphan, methamidofos, maneb, zineb, cyhalothrin, deltamethrin, cyfluthrin, metallo-organic compounds in Spinach, Cabbage, Pimento, Japanese Bean, Japanese Pumpkin, Tomato, Potato, Sweet Potato. The results and conclusion are present in this work. (author)

Scoring protein interaction decoys using exposed residues (SPIDER): a novel multibody interaction scoring function based on frequent geometric patterns of interfacial residues.

Science.gov (United States)

Khashan, Raed; Zheng, Weifan; Tropsha, Alexander

2012-08-01

Accurate prediction of the structure of protein-protein complexes in computational docking experiments remains a formidable challenge. It has been recognized that identifying native or native-like poses among multiple decoys is the major bottleneck of the current scoring functions used in docking. We have developed a novel multibody pose-scoring function that has no theoretical limit on the number of residues contributing to the individual interaction terms. We use a coarse-grain representation of a protein-protein complex where each residue is represented by its side chain centroid. We apply a computational geometry approach called Almost-Delaunay tessellation that transforms protein-protein complexes into a residue contact network, or an undirectional graph where vertex-residues are nodes connected by edges. This treatment forms a family of interfacial graphs representing a dataset of protein-protein complexes. We then employ frequent subgraph mining approach to identify common interfacial residue patterns that appear in at least a subset of native protein-protein interfaces. The geometrical parameters and frequency of occurrence of each "native" pattern in the training set are used to develop the new SPIDER scoring function. SPIDER was validated using standard "ZDOCK" benchmark dataset that was not used in the development of SPIDER. We demonstrate that SPIDER scoring function ranks native and native-like poses above geometrical decoys and that it exceeds in performance a popular ZRANK scoring function. SPIDER was ranked among the top scoring functions in a recent round of CAPRI (Critical Assessment of PRedicted Interactions) blind test of protein-protein docking methods. Copyright © 2012 Wiley Periodicals, Inc.

Evaluation of residue-residue contact prediction in CASP10

KAUST Repository

Monastyrskyy, Bohdan

2013-08-31

We present the results of the assessment of the intramolecular residue-residue contact predictions from 26 prediction groups participating in the 10th round of the CASP experiment. The most recently developed direct coupling analysis methods did not take part in the experiment likely because they require a very deep sequence alignment not available for any of the 114 CASP10 targets. The performance of contact prediction methods was evaluated with the measures used in previous CASPs (i.e., prediction accuracy and the difference between the distribution of the predicted contacts and that of all pairs of residues in the target protein), as well as new measures, such as the Matthews correlation coefficient, the area under the precision-recall curve and the ranks of the first correctly and incorrectly predicted contact. We also evaluated the ability to detect interdomain contacts and tested whether the difficulty of predicting contacts depends upon the protein length and the depth of the family sequence alignment. The analyses were carried out on the target domains for which structural homologs did not exist or were difficult to identify. The evaluation was performed for all types of contacts (short, medium, and long-range), with emphasis placed on long-range contacts, i.e. those involving residues separated by at least 24 residues along the sequence. The assessment suggests that the best CASP10 contact prediction methods perform at approximately the same level, and comparably to those participating in CASP9.

Magnetic separation as a plutonium residue enrichment process

International Nuclear Information System (INIS)

Avens, L.R.; Gallegos, U.F.; McFarlan, J.T.

1990-01-01

Several plutonium contaminated residues have been subjected to Open Gradient Magnetic Separation (OGMS) on an experimental scale. OGMS experiments on graphite and bomb reduction residues resulted in a plutonium rich fraction and a plutonium lean fraction. Values for the bulk quantity rejected to the lean fraction varied between about 20% to 85% of the feed bulk. The plutonium content of the lean fraction can be reduced from about 2% in the feed to the 0.1% to 0.5% range dependent on the portion of the feed rejected to this lean fraction. These values are low enough in plutonium to meet economic discard limits and be considered for direct discard. Magnetic separation of pyrochemical salts gave less favorable results. While a fraction very rich in plutonium could be obtained, the lean fraction plutonium content was too high for direct discard. This may still have chemical processing applications. OGMS experiments at low magnetic field strength on incinerator ash did give two fractions but the plutonium content of each fraction was essentially identical. Thus, no chemical processing advantage was identified for magnetic separation of this residue. 6 refs., 1 fig., 9 tabs

Proceedings of the 7. biennial residue-to-revenue residual wood conference 2007

International Nuclear Information System (INIS)

Raulin, J.

2007-01-01

This conference provided information on the highest and best use of residual wood, which is quickly becoming a valuable commodity. Issues concerning forest residues, sawmill wastes, agricultural residues and urban organic materials were discussed along with trends in Canadian surplus mill waste production. The evolving nature and technologies of the biomass business were highlighted with particular focus on how to generate energy and save money through the use of residual wood. Residual wood energy projects and developments in Canada, North America and Europe were outlined along with biomass development in relation to forest fires and insect disturbances. Cogeneration technologies using wood wastes for thermal heat, steam and electricity were also presented, along with transportation fuel technologies for the production of ethanol. It was noted that with the rising cost of energy, the forest industry is seeking energy solutions based on the use of residual wood. The range of economically practical residual wood solutions continues to grow as energy prices increase. The conference was attended by more than 200 delegates from the forest industry, suppliers and government representatives, to discuss policies and procedures currently in place. Industry investment is being stimulated by the potential for biofuels and biochemicals, as well as the co-operation between the forest and energy sectors. The conference featured 23 presentations, of which 12 have been catalogued separately for inclusion in this database. refs., tabs., figs

Qualitative screening method for pesticide residues detection in fruits and vegetables

Directory of Open Access Journals (Sweden)

Iván Mauricio Huérfano Barco

2018-01-01

Full Text Available Because of the importance of developing methodologies that allow agricultural residues analysis, a rapid screening qualitative method for the determination of pesticides residues in fruits and vegetables was validated. The methodology was based on the European QuEChERS extraction method with an additional cleaning step by gel permeation chromatography (GPC, which helped to reduce the number of matrix components in the final extract. The analysis was carried out by gas chromatography coupled to mass spectrometry with a single quadrupole analyzer. The methodology was appropriate for the qualitative analysis of 31 pesticides at their respective maximum residue limits. Consistent results were obtained with respect to a quantitative routine methodology in the analysis of real samples, hence the methodology was proven to be a good alternative for the fast analysis of these contaminants in fruits and vegetables.

Long Term Sugarcane Crop Residue Retention Offers Limited Potential to Reduce Nitrogen Fertilizer Rates in Australian Wet Tropical Environments.

Science.gov (United States)

Meier, Elizabeth A; Thorburn, Peter J

2016-01-01

The warming of world climate systems is driving interest in the mitigation of greenhouse gas (GHG) emissions. In the agricultural sector, practices that mitigate GHG emissions include those that (1) reduce emissions [e.g., those that reduce nitrous oxide (N2O) emissions by avoiding excess nitrogen (N) fertilizer application], and (2) increase soil organic carbon (SOC) stocks (e.g., by retaining instead of burning crop residues). Sugarcane is a globally important crop that can have substantial inputs of N fertilizer and which produces large amounts of crop residues ('trash'). Management of N fertilizer and trash affects soil carbon and nitrogen cycling, and hence GHG emissions. Trash has historically been burned at harvest, but increasingly is being retained on the soil surface as a 'trash blanket' in many countries. The potential for trash retention to alter N fertilizer requirements and sequester SOC was investigated in this study. The APSIM model was calibrated with data from field and laboratory studies of trash decomposition in the wet tropics of northern Australia. APSIM was then validated against four independent data sets, before simulating location × soil × fertilizer × trash management scenarios. Soil carbon increased in trash blanketed soils relative to SOC in soils with burnt trash. However, further increases in SOC for the study region may be limited because the SOC in trash blanketed soils could be approaching equilibrium; future GHG mitigation efforts in this region should therefore focus on N fertilizer management. Simulated N fertilizer rates were able to be reduced from conventional rates regardless of trash management, because of low yield potential in the wet tropics. For crops subjected to continuous trash blanketing, there was substantial immobilization of N in decomposing trash so conventional N fertilizer rates were required for up to 24 years after trash blanketing commenced. After this period, there was potential to reduce N fertilizer

Long term sugarcane crop residue retention offers limited potential to reduce nitrogen fertilizer rates in Australian wet tropical environments

Directory of Open Access Journals (Sweden)

Elizabeth Anne Meier

2016-07-01

Full Text Available The warming of world climate systems is driving interest in the mitigation of greenhouse gas (GHG emissions. In the agricultural sector, practices that mitigate GHG emissions include those that (1 reduce emissions (e.g. those that reduce nitrous oxide (N2O emissions by avoiding excess nitrogen (N fertilizer application, and (2 increase soil organic carbon (SOC stocks (e.g. by retaining instead of burning crop residues. Sugarcane is a globally important crop that can have substantial inputs of N fertilizer and which produces large amounts of crop residues (‘trash’. Management of N fertilizer and trash affects soil carbon and nitrogen cycling, and hence GHG emissions. Trash has historically been burned at harvest, but increasingly is being retained on the soil surface as a ‘trash blanket’ in many countries. The potential for trash retention to alter N fertilizer requirements and sequester SOC was investigated in this study. The APSIM model was calibrated with data from field and laboratory studies of trash decomposition in the wet tropics of northern Australia. APSIM was then validated against four independent data sets, before simulating location  soil  fertilizer  trash management scenarios. Soil carbon increased in trash blanketed soils relative to SOC in soils with burnt trash. However, further increases in SOC for the study region may be limited because the SOC in trash blanketed soils could be approaching equilibrium; future GHG mitigation efforts in this region should therefore focus on N fertilizer management. Simulated N fertilizer rates were able to be reduced from conventional rates regardless of trash management, because of low yield potential in the wet tropics. For crops subjected to continuous trash blanketing, there was substantial immobilization of N in decomposing trash so conventional N fertilizer rates were required for up to 24 yr after trash blanketing commenced. After this period, there was potential to

Aqueous methods for recovery of plutonium from pyrochemical residues

International Nuclear Information System (INIS)

Muscatello, A.C.; Killion, M.E.; Fisher, D.C.

1987-01-01

Studies of the recovery of plutonium from the pyrochemical residue salts from the Direct Oxide Reduction (DOR) and Electrorefining (ER) processes have shown that chloride anion exchange is useful and effective. Our previous studies have defined the operating limits for obtaining low level effluent plutonium losses on the order of 10 -3 g/l. The knowledge obtained in work on DOR salt was extended to ER salt and a process has been demonstrated to be feasible on a larger scale. Studies of oxalate precipitation of plutonium (III) from the eluat exhibit the expected losses to the filtrate as a function of the acidity. Two alternatives to chloride anion exchange, caustic leaching and direct oxalate precipitation are also shown to be feasible for the recovery of plutonium from ER salts. The results of studies of coprocessing DOR and ER residue salts to increase ER salt throughput and decrease HC1 requirements are also presented. The feasibility of coprocessing other pyrochemical residues, such as black salts, anode heel, and ER scrapeout will be discussed

Estimation of selected residual antibiotics in muscle, kidney, liver, and egg of layer chicken

International Nuclear Information System (INIS)

Amjad, H.; Iqbal, J.; Naeem, M.

2006-01-01

The present studies were conducted for the estimation of quinolone residues in our local poultry products. The poultry products included muscle, kidney, liver and egg (yolk and white). The quinolones included in this study were, oxolonic acid, flumequine, enrofloxacin, and ciprofloxacin. An assessment of the variation of each analyte (quinolones antibiotic residues) in these products was made. A comparison was made among the analyte (quinolones) concentrations in different tissues/organs and their internationally permissible safer maximum residue limits (MRLS'). Infra Red spectra were used to detect the presence and identification of different quinolones. HPLC with ODS Column and U.V. detector was used for the quantification. (author)

Solid residues

International Nuclear Information System (INIS)

Mulder, E.; Duin, P.J. van; Grootenboer, G.J.

1995-01-01

A summary is presented of the many investigations that have been done on solid residues of atmospheric fluid bed combustion (AFBC). These residues are bed ash, cyclone ash and bag filter ash. Physical and chemical properties are discussed and then the various uses of residues (in fillers, bricks, gravel, and for recovery of aluminium) are summarised. Toxicological properties of fly ash and stack ash are discussed as are risks of pneumoconiosis for workers handling fly ash, and contamination of water by ashes. On the basis of present information it is concluded that risks to public health from exposure to emissions of coal fly ash from AFBC appear small or negligible as are health risk to workers in the coal fly ash processing industry. 35 refs., 5 figs., 12 tabs

A Design of Portable Pesticide Residue Detection System Based on the Enzyme Electrode

Directory of Open Access Journals (Sweden)

Xia SUN

2013-03-01

Full Text Available In this paper, a portable detection system was designed based on amperometric acetylcholinesterase biosensor for rapidly detecting pesticide residues in fruits and vegetables. There were potentiostat, three electrode system, differential amplification circuit and double integral analog to digital (A/D circuit modules in this system. The measurement principle of this system was depended on the weak current from enzyme catalyzing substrate in acetylcholinesterase biosensor for detecting pesticide residues. The weak current generated by the enzyme biosensor was changed into 0-5 V standard voltage signal by this system as an output signal. The proposed system was investigated with eight kinds of standard pesticide of different concentrations, the results showed that the detection limits were all lower than 10 ng/kg. Thus, a new effective home-made system of detecting pesticide residues with portable, easy-to-use, fast response was developed. The pesticide residues rapid detection system can collect the weak current signal generated by electrochemical reaction and on-site detect the concentration of pesticide residues in real fruits and vegetables samples.

Residual stress measurements by means of neutron diffraction

International Nuclear Information System (INIS)

Pintschovius, L.; Jung, V.; Macherauch, E.; Voehringer, O.

1983-01-01

A new method for the analysis of multiaxial residual stress states is presented, which is based on high resolution neutron diffraction. It is analogous to X-ray stress analysis, but the use of neutrons instead of X-rays allows the analysis of the stress distributions also in the interior of technical components in a non-destructive way. To prove the feasibility of the method, investigations of the loading stress distributions of an aluminium bar subjected to purely elastic bending were performed. Limiting factors due to the volume of the internal probe region and the sample thickness are discussed. Complete neutron residual stress analyses were carried out for a plastically deformed bending bar and a transformation-free water-quenched steel cylinder. The results are in fairly good agreement with theoretical expectations and with X-ray control measurements at the surface of the objects. (Auth.)

Residues of 14C-chlorpyrifos in coconut by radiotracer techniques

International Nuclear Information System (INIS)

Tejada, A.W.; Calumpang, S.M.F.; Magallona, E.D.

1992-01-01

A coconut tree was root-infused with 5 g a.i. chlorpyrifos (Lorsban plus 1.4 uCi of 14 C-chlorpyrifos. Coconut samples both young and mature, were taken 24 h up to 60 days after root infusion. Analysis of the meat and water was done. The maximum uptake of chlorpyrifos equivalents was on the 13th day after root infusion both in mature and young fruit. The residue in water reached the peak on the 20th day after infusion and declined thereafter. A preharvest interval (PHI) of more than 60 days maybe recommended for safe consumption. The usual practice of storing copra in treated warehouses until it is processed into oil was simulated in the laboratory to determine the residues absorbed on the meat. Forty kg of copra with moisture content of 7-12% were stored in an improvised warehouse, i.e. 1 m x 1.5 m x 1 m wooden box, which was treated with 100 ml 1% a.i. Lorsban 50 WP plus 100 uCi 14 C-chlorpyrifos for protection against insects. Analysis showed that 14 C-chlorpyrifos equivalents ranged from 22.6 mg/kg on the 30th day to 8.2 mg/kg on the 90th day with a 63.7% reduction in residues. Bound residues were detected on samples stored for 60-90 days, with levels of 1.0 to 0.2 ug/g 14 C-chlorpyrifos equivalents. This is within the Maximum Residue Limit of 2 mg/kg set by FAO/WHO for chlorpyrifos in most agricultural commodities. Chlorpyrifos residues were also determined at various stages of refining and processing of crude coconut oil. It was subjected to alkali refining, bleaching and finally steaming. The residues were reduced by as much as 32.7%. (author). 18 refs.; 2 figs.; 3 tabs

Authorized limits for Fernald copper ingots

Energy Technology Data Exchange (ETDEWEB)

Frink, N.; Kamboj, S.; Hensley, J.; Chen, S. Y.

1997-09-01

This development document contains data and analysis to support the approval of authorized limits for the unrestricted release of 59 t of copper ingots containing residual radioactive material from the U.S. Department of Energy (DOE) Fernald Environmental Management Project (FEMP). The analysis presented in this document comply with the requirements of DOE Order 5400.5, {open_quotes}Radiation Protection of the Public and the Environment,{close_quotes} as well as the requirements of the proposed promulgation of this order as 10 CFR Part 834. The document was developed following the step-by-step process described in the Draft Handbook for Controlling Release for Reuse or Recycle Property Containing Residual Radioactive Material.

Authorized limits for Fernald copper ingots

International Nuclear Information System (INIS)

Frink, N.; Kamboj, S.; Hensley, J.; Chen, S.Y.

1997-09-01

This development document contains data and analysis to support the approval of authorized limits for the unrestricted release of 59 t of copper ingots containing residual radioactive material from the U.S. Department of Energy (DOE) Fernald Environmental Management Project (FEMP). The analysis presented in this document comply with the requirements of DOE Order 5400.5, open-quotes Radiation Protection of the Public and the Environment,close quotes as well as the requirements of the proposed promulgation of this order as 10 CFR Part 834. The document was developed following the step-by-step process described in the Draft Handbook for Controlling Release for Reuse or Recycle Property Containing Residual Radioactive Material

A review of experimental methods for determining residual creep life

International Nuclear Information System (INIS)

Bolton, C.J.

1977-11-01

Experimental methods available for determining how much creep life remains at a particular time in the high temperature service of a component are reviewed. After a brief consideration of the limitations of stress rupture extrapolation techniques, the application of post-exposure creep testing is considered. Ways of assessing the effect of microstructural degradation on residual life are then reviewed. It is pointed out that while this type of work will be useful for certain materials, there are other materials in which 'mechanical damage' such as cavitation will be more important. Cavitation measurement techniques are therefore reviewed. The report ends with a brief consideration of the use of crack growth measurements in assessing the residual life of cracked components. (author)

Gas chromatographic determination with electron capture detection of residual ethylene oxide in intraocular lenses

Energy Technology Data Exchange (ETDEWEB)

Kikuchi, H.; Nakamura, A.; Tsuji, K.

1988-01-01

A sensitive method is described to determine trace quantities of ethylene oxide (EO) in EO-sterilized intraocular lenses (IOLs). An IOL is dipped in ethanol containing 0.25 ppm propylene oxide (PO) in a 4 mL vial, 2 drops of freshly distilled hydrobromic acid is added through a septum, and the mixture is warmed at 50/sup 0/C for 24 h. It is then neutralized by vigorous shaking with sodium bicarbonate, dehydrated with anhydrous sodium sulfate, and filtered. The filtrate is injected into a gas chromatograph with electron-capture detection, and the peak height ratio of ethylene bromohydrin/propylene bromohydrin is measured. EO residue is calculated from the calibration curve obtained through a similar procedure with the standard EO/PO solutions. The limit of determination is 0.04 ..mu..g/lens (ca 2.0 ppm). When EO residue levels were determined for IOLs sampled at 3 different aeration periods after stabilization, the authors found that 9 days of aeration was necessary to meet the US Food and Drug Administration proposed limit for EO residue in IOLs.

Investigation of the source of residual phthalate in sundried salt.

Science.gov (United States)

Kim, Jin Hyo; Lee, Jin Hwan; Kim, So-Young

2014-03-01

Phthalate contamination in sundried salt has recently garnered interest in Korea. Phthalate concentrations were investigated in Korean sundried salts, source waters, and aqueous extracts from polyvinyl chloride materials used in salt ponds. Preliminary screening results for phthalates in Korean sundried salts revealed that only di(2-ethylhexyl)phthalate (DEHP) was over the limit of detection, with an 8.6% detection rate, and the concentration ranged from below the limit of detection to 0.189 mg/kg. The tolerable daily intake contribution ratio of the salt was calculated to be only 0.001%. Residual phthalates were below 0.026 mg/liter in source water, and the aqueous extracted di-n-butylphthalate, benzylbutylphthalate, and DEHP, which are considered endocrine disruptors, were below 0.029 mg/kg as derived from the polyvinyl chloride materials in salt ponds. The transfer ratios of the six phthalates from seawater to sundried salts were investigated; transfer ratio was correlated with vapor pressure (r(2) = 0.9875). Thus, di-n-butylphthalate, benzylbutylphthalate, DEHP, and di-n-octylphthalate can be considered highly likely residual pollutants in some consumer salts.

Exposure to DDT and its metabolites from khat (Catha edulis) chewing: Consumers risk assessment from southwestern Ethiopia.

Science.gov (United States)

Mekonen, Seblework; Ambelu, Argaw; Negassa, Belay; Spanoghe, Pieter

2017-07-01

Khat (Catha edulis) is one of the most consumed plant in the horn of African countries. However, it is a stimulant plant that has several side effects on the health of consumers. On top of that, the khat leaves used for human consumption are often contain contaminants such as pesticide residues. The present study aims to investigate the level of DDT residue and its metabolites (p'p-DDE, p'p-DDD, o'p-DDT and p'p-DDT) in khat samples and to undertake exposure assessment to consumers. The khat samples were collected from local markets in southwestern Ethiopia. Consumption survey was undertaken using 24 h recall method for both male and female khat consumers. The finding showed that 80% of the khat samples contained DDT and its metabolites. Some of the residues were above the maximum residue limit (MRL) set by Food and Agricultural Organization (FAO). The concentration of p'p-DDE and p'p-DDT in khat were in the range of 0.033-0.113 and 0.010-0.026 mg/kg, respectively. High concentration of the metabolite (p'p-DDE) compared to the parent compound (p'p-DDT) revealed the historical use of DDT in the study area. Probabilistic exposure analysis indicated that the mean and 97.5 percentile (P97.5), of the estimated daily intake of total DDT were 0.002 and 0.006 mg/kg bw/day, respectively. The study concluded that khat consumers are exposed to the stimulant effect of the plant as well as DDT and its metabolites in Jimma zone. Copyright © 2017 Elsevier Inc. All rights reserved.

Analysis of imidacloprid residues in fruits, vegetables, cereals, fruit juices, and baby foods, and daily intake estimation in and around Lucknow, India.

Science.gov (United States)

Kapoor, Upasana; Srivastava, M K; Srivastava, Ashutosh Kumar; Patel, D K; Garg, Veena; Srivastava, L P

2013-03-01

A total of 250 samples-including fruits, fruit juices, and baby foods (50 samples each), vegetables (70 samples), and cereals (30 samples)-were collected from Lucknow, India, and analyzed for the presence of imidacloprid residues. The QuEChERS (quick, easy, cheap, effective, rugged, and safe) method of extraction coupled with high-performance liquid chromatographic analysis were carried out, and imidacloprid residues were qualitatively confirmed by liquid chromatography-mass spectrometry. Imidacloprid was not detected in samples of fruit juices and baby foods. It was, however, detected in 38 samples of fruits, vegetables, and cereals, which is about 15.20% of the total samples. Of samples of fruits, 22% showed the presence of imidacloprid, and 2% of samples showed residues above the maximal residue limit. Although imidacloprid was detected in 24% of vegetable samples, only 5.71% showed the presence of imidacloprid above the maximal residue limit. However, 33% of cereal samples showed the presence of imidacloprid, and about 3% of samples were above the maximal residue limit. The calculated estimated daily intake ranged between 0.004 and 0.131 µg/kg body weight, and the hazard indices ranged from 0.007 to 0.218 for these food commodities. It is therefore indicated that lifetime consumption of vegetables, fruits, fruit juices, baby foods, wheat, rice, and pulses may not pose a health hazard for the population of Lucknow because the hazard indices for imidacloprid residues were below one. Copyright © 2012 SETAC.

Effectiveness of dynamic MRI for diagnosing pericicatricial minimal residual breast cancer following excisional biopsy

International Nuclear Information System (INIS)

Kawashima, Hiroko; Tawara, Mari; Suzuki, Masayuki; Matsui, Osamu; Kadoya, Masumi

2001-01-01

The purpose of this study was to investigate the effectiveness of dynamic MRI for diagnosing pericicatricial minimal residual breast cancer following excisional biopsy. Twenty-six patients who underwent excisional biopsy of a tumor or calcified lesion of the breast underwent gadolinium-enhanced dynamic MRI by the fat-saturated 2D fast spoiled gradient echo (SPGR) sequence (group 1), 24 patients by the spectral IR enhanced 3D fast gradient echo (Efgre3d) sequence (group 2). Pericicatricial residual cancer was confirmed histologically in 29 of the 50 patients. The overall sensitivity, specificity, accuracy, positive predictive value, and negative predictive value of MRI for residual cancer diagnosis was 66, 81, 72, 83 and 63%. A nodular, thick and discontinuous enhanced rim around the scar is indicative of a residual tumor. However, false-positive findings due to granulation or proliferative fibrocystic change remain limitations

Effectiveness of dynamic MRI for diagnosing pericicatricial minimal residual breast cancer following excisional biopsy

Energy Technology Data Exchange (ETDEWEB)

Kawashima, Hiroko E-mail: hirokok@med.kanazawa-u.ac.jp; Tawara, Mari; Suzuki, Masayuki; Matsui, Osamu; Kadoya, Masumi

2001-10-01

The purpose of this study was to investigate the effectiveness of dynamic MRI for diagnosing pericicatricial minimal residual breast cancer following excisional biopsy. Twenty-six patients who underwent excisional biopsy of a tumor or calcified lesion of the breast underwent gadolinium-enhanced dynamic MRI by the fat-saturated 2D fast spoiled gradient echo (SPGR) sequence (group 1), 24 patients by the spectral IR enhanced 3D fast gradient echo (Efgre3d) sequence (group 2). Pericicatricial residual cancer was confirmed histologically in 29 of the 50 patients. The overall sensitivity, specificity, accuracy, positive predictive value, and negative predictive value of MRI for residual cancer diagnosis was 66, 81, 72, 83 and 63%. A nodular, thick and discontinuous enhanced rim around the scar is indicative of a residual tumor. However, false-positive findings due to granulation or proliferative fibrocystic change remain limitations.

Handling of Solid Residues

International Nuclear Information System (INIS)

Medina Bermudez, Clara Ines

1999-01-01

The topic of solid residues is specifically of great interest and concern for the authorities, institutions and community that identify in them a true threat against the human health and the atmosphere in the related with the aesthetic deterioration of the urban centers and of the natural landscape; in the proliferation of vectorial transmitters of illnesses and the effect on the biodiversity. Inside the wide spectrum of topics that they keep relationship with the environmental protection, the inadequate handling of solid residues and residues dangerous squatter an important line in the definition of political and practical environmentally sustainable. The industrial development and the population's growth have originated a continuous increase in the production of solid residues; of equal it forms, their composition day after day is more heterogeneous. The base for the good handling includes the appropriate intervention of the different stages of an integral administration of residues, which include the separation in the source, the gathering, the handling, the use, treatment, final disposition and the institutional organization of the administration. The topic of the dangerous residues generates more expectation. These residues understand from those of pathogen type that are generated in the establishments of health that of hospital attention, until those of combustible, inflammable type, explosive, radio-active, volatile, corrosive, reagent or toxic, associated to numerous industrial processes, common in our countries in development

Residual strength and crack propagation tests on C-130 airplane center wings with service-imposed fatigue damage

Science.gov (United States)

Snider, H. L.; Reeder, F. L.; Dirkin, W. J.

1972-01-01

Fourteen C-130 airplane center wings, each containing service-imposed fatigue damage resulting from 4000 to 13,000 accumulated flight hours, were tested to determine their fatigue crack propagation and static residual strength characteristics. Eight wings were subjected to a two-step constant amplitude fatigue test prior to static testing. Cracks up to 30 inches long were generated in these tests. Residual static strengths of these wings ranged from 56 to 87 percent of limit load. The remaining six wings containing cracks up to 4 inches long were statically tested as received from field service. Residual static strengths of these wings ranged from 98 to 117 percent of limit load. Damage-tolerant structural design features such as fastener holes, stringers, doublers around door cutouts, and spanwise panel splices proved to be effective in retarding crack propagation.

Measurement and modeling of residual stress in a welded Haynes[reg] 25 cylinder

International Nuclear Information System (INIS)

Larsson, C.; Holden, T.M.; Bourke, M.A.M.; Stout, M.; Teague, J.; Lindgren, L.-E.

2005-01-01

An experimental and simulation study of residual stresses was made in the vicinity of a gas tungsten arc weld, used to join a hemispherical end cap to a cylinder. The capped cylinder is used in a satellite application and was fabricated from a Co-based Haynes[reg] 25 alloy. The cylinder was 34.7 mm in outer diameter and 3.3 mm in thickness. The experimental measurements were made by neutron diffraction and the simulation used the implicit Marc finite element code. The experimental resolution was limited to approximately 3 mm parallel to the axis of the cylinder (the weld was 6 mm in the same direction) and comparison over the same volume of the finite element prediction showed general agreement. Subject to the limited spatial resolution, the largest experimentally measured tensile residual stress was 180 MPa, located at the middle of the weld. However, the predictions suggest that there are regions in the weld where average tensile residual stresses as much as 400 MPa exist. One qualitative disparity between the model and the experiments was that the measurement included a larger degree of asymmetry on either side of the weld than predicted by the model

Measurement and modeling of residual stress in a welded Haynes[reg] 25 cylinder

Energy Technology Data Exchange (ETDEWEB)

Larsson, C. [Div. of Eng. Mat., Department of Mech. Eng., Linkoeping University, 58183 Linkoeping (Sweden)]. E-mail: clarsson@cfl.rr.com; Holden, T.M. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Bourke, M.A.M. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Stout, M. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Teague, J. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Lindgren, L.-E. [Div. Comp. Aided Design, Lulea University of Technology and Dalarna University, 97187 Lulea (Sweden)

2005-06-15

An experimental and simulation study of residual stresses was made in the vicinity of a gas tungsten arc weld, used to join a hemispherical end cap to a cylinder. The capped cylinder is used in a satellite application and was fabricated from a Co-based Haynes[reg] 25 alloy. The cylinder was 34.7 mm in outer diameter and 3.3 mm in thickness. The experimental measurements were made by neutron diffraction and the simulation used the implicit Marc finite element code. The experimental resolution was limited to approximately 3 mm parallel to the axis of the cylinder (the weld was 6 mm in the same direction) and comparison over the same volume of the finite element prediction showed general agreement. Subject to the limited spatial resolution, the largest experimentally measured tensile residual stress was 180 MPa, located at the middle of the weld. However, the predictions suggest that there are regions in the weld where average tensile residual stresses as much as 400 MPa exist. One qualitative disparity between the model and the experiments was that the measurement included a larger degree of asymmetry on either side of the weld than predicted by the model.

On the evaluation of residual stress and mechanical properties of FeCrBSi coatings by nanoindentation

International Nuclear Information System (INIS)

Zhu Lina; Xu Binshi; Wang Haidou; Wang Chengbiao

2012-01-01

Highlights: ► Ni/Al coating can reduce the mismatch degree between the coating and substrate. ► No obvious pile-up is observed for the nanoindents of the FeCrBSi coating. ► The higher the tensile residual stress, the lower the hardness and elastic modulus. - Abstract: In this paper, the residual stress in the plasma-sprayed FeCrBSi coating was determined by nanoindentation and X-ray diffraction (XRD). The XRD results showed that tensile residual stress was generated in the FeCrBSi coating, and the through-thickness values range between 40 MPa and 112 MPa. The residual stress measured by nanoindentation is 753 MPa. The difference between the XRD and nanoindentation results was discussed. It is found that the factors limiting the nanoindentation measurement of residual stress include the ‘sink-in’ deformation around the indenter, the roughness of the FeCrBSi coating, and the use of reference sample without residual stress. The above three factors lead to the over-prediction of residual stress by nanoindentation.

Numerical simulation of residual stress in piping components at Framatome-ANP

International Nuclear Information System (INIS)

Gilies, P.; Franco, C.; Cipiere, M.-F.; Ould, P.

2005-01-01

Numerous manufacturing processes induce residual stresses and distortions in piping components and associated welds: quenching of cast pipings, machining and welding. In Pressurized Water Reactors, most of the components have a large thickness for sustaining pressure and distortions are a minor source of concern. This is not the case for residual stresses which may have a strong influence on several type of damage such as fatigue, corrosion, brittle fracture. In low toughness components, residual stress fields may contribute to ductile tearing initiation. These potential damages are mitigated after welding by stress relief heat treatment, which is applied in a systematic manner to ferritic components of the primary system in nuclear reactors. This treatment is not applied on austenitic piping for which the heat treatment temperature is limited due to the risk of sensitization and residual stresses are difficult to eliminate completely. Since on site measurements are costly and difficult to perform, numerical simulation appears to be an attractive tool for estimating residual stress distributions. Framatome-ANP is working on modelling manufacturing processes with that purpose in mind. This paper presents three kinds of applications illustrating efforts on welding, quenching and machining simulation. First a comparison is shown between computations and measurements of residual stress induced by welding of a dissimilar weld metal junction. Then numerical simulations of quenching of a cast stainless steel nozzle are presented. Finally quenching followed by machining and grinding of this cast component are considered in a full simulation of the manufacturing process. Computed distortions and residual stresses are compared with experimental measurements at different stages of the manufacturing process. (authors)

[Situation analysis and standard formulation of pesticide residues in traditional Chinese medicines].

Science.gov (United States)

Yang, Wan-Zhen; Kang, Chuan-Zhi; Ji, Rui-Feng; Zhou, L I; Wang, Sheng; Li, Zhen-Hao; Ma, Zhong-Hua; Guo, Lan-Ping

2017-06-01

Chinese Pharmacopoeia provides nine pesticide Maximum Residual Limits(MRLs) of traditional Chinese medicines(TCMs), The number of pesticides used in production are far more than those listed in pharmacopoeia. The lack of the standards make it's hard to reflect the real situation of pesticide residues in TCMs correctly. The paper is aimed to analyze the data of pesticide residues in TCMs from 7 089 items in 140 reports, and judging the exceedance rate of pesticides in TCMs using the MRLs of European pharmacopoeia，which is widely accepted in many countries. The results show that：①Pesticide residues in 18 kinds of TCMs are higher than MRLs，while in 137 kinds are below MRLs, such as Atractylodis Macrocephalae Rhizoma, Menthae Haplocalycis Herba and Fritillariae Thunbergii Bulbus. The average exceedance rate of all TCMs is 1.72%. The average exceedance rates of organochlorine, organophosphorus and pyrethroid are 2.26%, 1.51%, 0.37%，respectively. ②The average exceedance rate of pesticides is 2.00%, and the exceedance rate is more than 5%, accounting for 8.33%, the exceedance rate is between 1%-5%, accounting for 18.75%. the exceedance rate is between 0%-1%, accounting for 18.75%. The remaining 29 kinds of pesticides were not exceeded, accounting for 60.42%.Some reports like Greenpeace's organization exaggerated the pesticide residues in TCMs.But the pesticide residue question is still worthy of attention, so we proposed to amend the Chinese Pharmacopoeia pesticide residues standards, to increase the pesticide species of traditional Chinese medicine in production on the basis of retaining the existing types of pesticide residues, to strengthen the system research of pesticide residues in TCMs, providing a basis for making standard and promoting import and export trade in TCMs. Copyright© by the Chinese Pharmaceutical Association.

Pushing the size limit of de novo structure ensemble prediction guided by sparse SDSL-EPR restraints to 200 residues: The monomeric and homodimeric forms of BAX

Science.gov (United States)

Fischer, Axel W.; Bordignon, Enrica; Bleicken, Stephanie; García-Sáez, Ana J.; Jeschke, Gunnar; Meiler, Jens

2016-01-01

Structure determination remains a challenge for many biologically important proteins. In particular, proteins that adopt multiple conformations often evade crystallization in all biologically relevant states. Although computational de novo protein folding approaches often sample biologically relevant conformations, the selection of the most accurate model for different functional states remains a formidable challenge, in particular, for proteins with more than about 150 residues. Electron paramagnetic resonance (EPR) spectroscopy can obtain limited structural information for proteins in well-defined biological states and thereby assist in selecting biologically relevant conformations. The present study demonstrates that de novo folding methods are able to accurately sample the folds of 192-residue long soluble monomeric Bcl-2-associated X protein (BAX). The tertiary structures of the monomeric and homodimeric forms of BAX were predicted using the primary structure as well as 25 and 11 EPR distance restraints, respectively. The predicted models were subsequently compared to respective NMR/X-ray structures of BAX. EPR restraints improve the protein-size normalized root-mean-square-deviation (RMSD100) of the most accurate models with respect to the NMR/crystal structure from 5.9 Å to 3.9 Å and from 5.7 Å to 3.3 Å, respectively. Additionally, the model discrimination is improved, which is demonstrated by an improvement of the enrichment from 5% to 15% and from 13% to 21%, respectively. PMID:27129417

A mind map for managing minimal residual disease in acute myeloid leukemia.

Science.gov (United States)

Benton, Christopher B; Ravandi, Farhad

2017-11-01

Advances in detecting traces of leukemia that were previously unidentifiable have increasingly led to the incorporation of information about residual disease into clinical decision making for patients with leukemia in both the postinduction and consolidation settings. This review discusses current concepts related to minimal residual disease (MRD), which is defined as submicroscopic disease detected during morphologic complete remission. The focus is on acute myeloid leukemia (AML). Basic methods for detecting MRD include flow cytometry, reverse transcription-polymerase chain reaction, and mutation analysis. Several studies using these assays have demonstrated prognostic implications based on MRD-positive vs MRD-negative status. As our understanding of the biological factors responsible for MRD in AML evolves, residual disease should be evaluated in the context of other prognostic markers. Current therapeutic options for managing MRD in AML are limited, and the clinical implications of a positive MRD test result can be significant. Regarding individual patients, an evidence-based approach must be applied while the institution- and assay-specific differences that currently exist are considered. Challenges associated with MRD assessment, such as the limited standardization of available assays and the paucity of effective agents to eradicate MRD, will need to be overcome before physicians who treat leukemia can use MRD as a tool for clinical management.

Ammonia volatilization from crop residues and frozen green manure crops

Science.gov (United States)

de Ruijter, F. J.; Huijsmans, J. F. M.; Rutgers, B.

2010-09-01

Agricultural systems can lose substantial amounts of nitrogen (N). To protect the environment, the European Union (EU) has adopted several directives that set goals to limit N losses. National Emission Ceilings (NEC) are prescribed in the NEC directive for nitrogen oxides and ammonia. Crop residues may contribute to ammonia volatilization, but sufficient information on their contribution to the national ammonia volatilization is lacking. Experiments were carried out with the aim to assess the ammonia volatilization of crop residues left on the soil surface or incorporated into the soil under the conditions met in practice in the Netherlands during late autumn and winter. Ammonia emission from residues of broccoli, leek, sugar beet, cut grass, fodder radish (fresh and frozen) and yellow mustard (frozen) was studied during two winter seasons using volatilization chambers. Residues were either placed on top of soil or mixed with soil. Mixing residues with soil gave insignificant ammonia volatilization, whereas volatilization was 5-16 percent of the N content of residues when placed on top of soil. Ammonia volatilization started after at least 4 days. Total ammonia volatilization was related to C/N-ratio and N concentration of the plant material. After 37 days, cumulative ammonia volatilization was negligible from plant material with N concentration below 2 percent, and was 10 percent of the N content of plant material with 4 percent N. These observations can be explained by decomposition of plant material by micro-organisms. After an initial built up of the microbial population, NH 4+ that is not needed for their own growth is released and can easily emit as NH 3 at the soil surface. The results of the experiments were used to estimate the contribution of crop residues to ammonia volatilization in the Netherlands. Crop residues of arable crops and residues of pasture topping may contribute more than 3 million kg NH 3-N to the national ammonia volatilization of the

Derivation of residual radioactive material guidelines for the Laboratory for Energy-Related Health Research site

International Nuclear Information System (INIS)

Chapman, T.E.

1993-11-01

Residual radioactive material guidelines were derived for the Laboratory for Energy-Related Health Research (LEHR) Environmental Restoration (ER) site in Davis, California. The guideline derivation was based on a dose limit of 100 mrem/yr. The US Department of Energy (DOE) residual radioactive material guideline computer code was used in this evaluation. This code implements the methodology described in the DOE manual for implementing residual radioactive material guidelines. Three potential site utilization scenarios were considered with the assumption that following ER action, the site will be used without radiological restrictions. The defined scenarios vary with regard to use of the site, time spent at the site, and sources of food consumed. The results of the evaluation indicate that the basic dose limit of 100 mrem/yr will not be exceeded, provided that the soil concentrations of these radionuclides at the LEHR site do not exceed the scenario-specific values calculated by this study. Except for the extent of the contaminated zone (which is very conservative), assumptions used are as site-specific as possible, given available information. The derived guidelines are single- radionuclide guidelines and are linearly proportional to the dose limit used in the calculations. In setting the actual residual soil contamination guides for the LEHR site, DOE will apply the as low as reasonably achievable policy to the decision-making process, along with other factors such as whether a particular scenario is reasonable and appropriate, as well as using site-specific inputs to computer models based on data not yet fully determined

Fate of iprovalicarb, indoxacarb, and boscalid residues in grapes and wine by GC-ITMS analysis.

Science.gov (United States)

Angioni, Alberto; Dedola, Fabrizio; Garau, Vincenzo Luigi; Schirra, Mario; Caboni, Pierluigi

2011-06-22

The behavior in field and the transfer from grapes to wine during winemaking of iprovalicarb, indoxacarb, and boscalid was studied. The residue levels found in grapes were far below the MRLs set for grapes in EU, accounting at harvest time 0.81, 0.43, and 4.23 mg/kg for iprovalicarb, indoxacarb, and boscalid, respectively. The residue levels in the samples treated with boscalid may have residual problems (due to an accumulation effect) if repeated field treatments will be performed. Winemaking experiments showed a complete transfer of all pesticide from grapes to the must, while in wine the residues were low or negligible due to the adsorbing effect of lees and pomace. The clarification experiments showed a good removal of pesticide residues from the wine media, for all pesticides. The GC-ITMS method showed good performance with adequate recoveries ranging from 75 to 115%, and good method limits of quantitation (LOQs) and of determination (LODs) far below MRLs.

PENETAPAN RESIDU DAN PERKIRAAN PENETAPAN BATAS MAKSIMUM RESIDU (BMR ORGANOKLORIN PADA SIMPLISIA

Directory of Open Access Journals (Sweden)

Ani Isnawati

2012-10-01

Full Text Available Penggunaaan bahan obat tradisional (simplisia untuk skala industri dan peningkatan produksi tanaman obat dalam skala besar menjadi tidak ekonomis tanpa pestisida. Disatu sisi penggunaan pestisida dapat menguntungkan yaitu menyebabkan toksis pada hama namun disisi lain toksisitas dapat terjadi juga pada manusia, sehingga residu pestisida dalam tanaman obat yang dikonsumsi dalam jangka panjang akan merugikan kesehatan. Batas maksimum Residu (BMR pestisida dalam simplisia baik di Indonesia maupun di negara lain belum ditetapkan. Sehingga untuk itu untuk mengetahui adanya residu pestisida jenis organoklorin yang telah dilarang penggunaannya melalui Permentan No.434.1/kpts/TP.270/7/2001 dan untuk mengetahui batas keamanannya, maka perlu dilakukan penetapan residu organoklorin dalam simplisia dan menetapkan batas keamanan berdasarkan perhitungan secara teoritis. Pengujian residu dilakukan terhadap golongan pestisida organoklorin pada 4 jenis simplisia (daun wungu (Graptophyllum pictum (L Grifl, daun sambiloto Andrographis paniculata Ness, herba pegagan (Centella  asiatica (L Urban, daun tempuyung (Sonchus arvensis (L yang berasal dari 3 lokasi penanaman, yaitu : perkebunan Tanaman Obat Manako (Jawa Barat, Balai Penelitian Tanaman Obat Tawangmangu (BPTO di Jawa Tengah dan Perkebunan Tanaman Obat Purwodadi (Jawa Timur. Pemeriksaan residu pestisida organoklorin menggunakan kromatografi gas dan perhitungan batas keamanan dihitung dengan adanya nilai ADI (Acceptable daily intake yang telah ditetapkan bersama antara JAO dan WHO serta perkiraan banyaknya konsumsi simplisia. Hasil Pengujian residu pestisida organoklorin diperoleh bahwa simplisia daun Wungu (Tawangmangu mengandung residu lindan dengan kadar 0,24 mg/kg, pegagan (Purwodadi, mengandung lindan 0,36 mg/kg dan aldrin 0,31 mg/kg serta pegagan (Manako mengandung heptaklor 0,15 mg/kg dan op-DDE 0,11 mg/kg. Adapun penghitungan BMR heptaklor dan lindan secara teoritis dengan asumsi rata

A method for the determination of residual beta activity in drinking water samples

Energy Technology Data Exchange (ETDEWEB)

Idoeta, R. [Dpto. Ingenieria Nuclear y Mecanica de Fluidos, E. T. S. Ingenieria de Bilbao - Universidad del Pais Vasco (UPV/EHU), Alda. Urquijo s/n. 48013 Bilbao (Spain)], E-mail: raquel.idoeta@ehu.es; Herranz, M.; Abelairas, A.; Legarda, F. [Dpto. Ingenieria Nuclear y Mecanica de Fluidos, E. T. S. Ingenieria de Bilbao - Universidad del Pais Vasco (UPV/EHU), Alda. Urquijo s/n. 48013 Bilbao (Spain)

2007-09-15

The determination of residual beta activity in drinking water is usually needed in most monitoring programs. In this work a procedure for its determination is described and expressions for the calculations of detection limits and uncertainties are proposed.

A method for the determination of residual beta activity in drinking water samples

International Nuclear Information System (INIS)

Idoeta, R.; Herranz, M.; Abelairas, A.; Legarda, F.

2007-01-01

The determination of residual beta activity in drinking water is usually needed in most monitoring programs. In this work a procedure for its determination is described and expressions for the calculations of detection limits and uncertainties are proposed

Assessment of imidacloprid and acetamiprid residues in okra and eggplant grown in peri-urban areas and their dietary intake in humans

International Nuclear Information System (INIS)

Amjad, A.; Akhtar, S.; Randhawa, M.; Binyameen, M.

2018-01-01

This research work was designed to estimate the gradually increasing use of insecticides on vegetables to create awareness among the consumers regarding their insecticide residues. The main aim of this study is to highlight the harmful effects of insecticides in comparison with dietary intake assessment of vegetables. In this regard, total 180 (n = 60×3) samples of okra (Abelmoschus esculentus) and eggplant (Solanum melongena) comprising of 30 samples vegetable were collected from the peri-urban farming system of Multan, Faisalabad and Gujranwala to assess insecticide residues along with their dietary intake assessment. The selected samples were quantified for the insecticide residues by using High Performance Liquid Chromatography (HPLC) technique equipped with UV/Visible detector. Results revealed that imidacloprid residues found in eggplant (0.226 mg Kg-1) and okra (0.176 mg Kg-1) from Multan region were greater than the residues reported from Gujranwala and Faisalabad. Out of all analyzed samples for imidacloprid and acetamaprid residues, 58% and 65% samples contained detectable residues respectively. Whereas 10% and 15% samples exceeded their maximum residue limits (MRLs) established by European Commission. Dietary intake assessment for imidacloprid and acetamiprid was calculated as per their maximum permissible intake (MPI) values i.e. 3.84 and 4.48 mg person-1day-1, respectively, which revealed that although a reasonable proportion of samples exceeded MRLs but their consumption was found within safe limit. (author)

Simplified RP-HPLC method for multi-residue analysis of abamectin, emamectin benzoate and ivermectin in rice.

Science.gov (United States)

Xie, Xianchuan; Gong, Shu; Wang, Xiaorong; Wu, Yinxing; Zhao, Li

2011-01-01

A rapid, reliable and sensitive reverse-phase high-performance liquid chromatography method with fluorescence detection (RP-FLD-HPLC) was developed and validated for simultaneous analysis of the abamectin (ABA), emamectin (EMA) benzoate and ivermectin (IVM) residues in rice. After extraction with acetonitrile/water (2 : 1) with sonication, the avermectin (AVMs) residues were directly derivatised by N-methylimidazole (N-NMIM) and trifluoroacetic anhydride (TFAA) and then analysed on RP-FLD-HPLC. A good linear relationship (r(2 )> 0.99) was obtained for three AVMs ranging from 0.01 to 5 microg ml(-1), i.e. 0.01-5.0 microg g(-1) in rice matrix. The limit of detection (LOD) and the limit of quantification (LOQ) were between 0.001 and 0.002 microg g(-1) and between 0.004 and 0.006 microg g(-1), respectively. Recoveries were from 81.9% to 105.4% and precision less than 12.4%. The proposed method was successfully applied to routine analysis of the AVMs residues in rice.

Residual magnetic field in rotary machines; Campo magnetico residual en maquinas rotatorias

Energy Technology Data Exchange (ETDEWEB)

Gonzalez V, Esteban A; Apanco R, Marcelino [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2007-07-01

The residual magnetism is a phenomenon in which the magnetic dipoles of a substance are oriented in a certain degree. On the other hand, when internal forces exist capable of aligning elementary magnetic dipoles of a material, a permanent magnet is obtained. Just as in a conductor or in a material, in the elements of a rotary electrical machine magnetic fields can be induced that produce a residual magnetism or magnetization. In the rotary electrical machines, the magnetization phenomenon causes serious problems, such as the generation of induced currents that propitiate the mechanical wear in bearings, collars, trunnions and inclusive in the shaft, by effects known as pitting, frosting and spark tracks, as well as erroneous readings in vibration and temperature sensors, that in some cases can cause the shut down of the machine. In this article are presented the general concepts on the residual magnetism in rotary electrical machines, the causes that originate it and the problems that arises, as well as the demagnetization of the components that have residual magnetic field. The results obtained by the area of Electrical Equipment of the Instituto de Investigaciones Electricas are revised, during the execution of activities related to the measurement and elimination of the residual magnetic field in rotary electrical machines. [Spanish] El magnetismo residual es un fenomeno en el que los dipolos magneticos de una sustancia se encuentran orientados en un grado determinado. Por otro lado, cuando existen fuerzas internas capaces de alinear los dipolos magneticos elementales de un material, se tiene un iman permanente. Al igual que en un conductor o un material, en los elementos de una maquina electrica rotatoria se pueden inducir campos magneticos que producen un magnetismo residual o magnetizacion. En las maquinas electricas rotatorias, el fenomeno de magnetizacion causa graves problemas, como la generacion de corrientes inducidas que propician el desgaste mecanico

Efficient identification of critical residues based only on protein structure by network analysis.

Directory of Open Access Journals (Sweden)

Michael P Cusack

2007-05-01

Full Text Available Despite the increasing number of published protein structures, and the fact that each protein's function relies on its three-dimensional structure, there is limited access to automatic programs used for the identification of critical residues from the protein structure, compared with those based on protein sequence. Here we present a new algorithm based on network analysis applied exclusively on protein structures to identify critical residues. Our results show that this method identifies critical residues for protein function with high reliability and improves automatic sequence-based approaches and previous network-based approaches. The reliability of the method depends on the conformational diversity screened for the protein of interest. We have designed a web site to give access to this software at http://bis.ifc.unam.mx/jamming/. In summary, a new method is presented that relates critical residues for protein function with the most traversed residues in networks derived from protein structures. A unique feature of the method is the inclusion of the conformational diversity of proteins in the prediction, thus reproducing a basic feature of the structure/function relationship of proteins.

Assessment of elimination profile of albendazole residues in fish.

Science.gov (United States)

Busatto, Zenaís; de França, Welliton Gonçalves; Cyrino, José Eurico Possebon; Paschoal, Jonas Augusto Rizzato

2018-01-01

Few drugs are specifically regulated for aquaculture. Thus this study considered albendazole (ABZ) as a potential drug for use in fish, which, however, is not yet regulated for this application. ABZ is a broad-spectrum anthelmintic approved for farmed ruminants and recently considered for treatment of fish parasites. It is the subject of careful monitoring because of potential residues in animal products. This study evaluated the depletion of ABZ and its main known metabolites: albendazole sulfoxide - ABZSO, albendazole sulfone - ABZSO 2 and albendazole amino sulfone - ABZ-2-NH 2 SO 2 , in the fillets of the Neotropical Characin pacu, Piaractus mesopotamicus, which were fed diets containing 10 mg ABZ kg -1 body weight in a single dose. Fish were euthanised at 8, 12, 24, 48, 72, 96 and 120 hours after medication and the depletion profiles of ABZ, each metabolite and the sum of all marker residues were assessed and evaluated taking into account methodological variations regarding determination of the maximum residue limits adopted by different international regulating agencies for estimation of the withdrawal period (WP). The estimated WPs ranged from 2 to 7 days.

Characterization of linear forms of the circular enterocin AS-48 obtained by limited proteolysis

NARCIS (Netherlands)

Montalbán-López, Manuel; Spolaore, Barbara; Pinato, Odra; Martínez-Bueno, Manuel; Valdivia, Eva; Maqueda, Mercedes; Fontana, Angelo

2008-01-01

AS-48 is a 70-residue circular peptide from Enterococcus faecalis with a broad antibacterial activity. Here, we produced by limited proteolysis a protein species carrying a single nicking and fragments of 55 and 38 residues. Nicked AS-48 showed a lower helicity by far-ultraviolet circular dichroism

Establishing Quantitative Standards for Residual Alkaline Phosphatase in Pasteurized Milk.

Science.gov (United States)

Kim, Dong-Hyeon; Chon, Jung-Whan; Lim, Jong-Soo; Kim, Hong-Seok; Kang, Il-Byeong; Jeong, Dana; Song, Kwang-Young; Kim, Hyunsook; Kim, Kwang-Yup; Seo, Kun-Ho

2016-01-01

The alkaline phosphatase (ALP) assay is a rapid and convenient method for verifying milk pasteurization. Since colorimetric ALP assays rely on subjective visual assessments, their results are especially unreliable near the detection limits. In this study, we attempted to establish quantitative criteria for residual ALP in milk by using a more objective method based on spectrophotometric measurements. Raw milk was heat-treated for 0, 10, 20, 30, and 40 min and then subjected to ALP assays. The quantitative criteria for residual ALP in the milk was determined as 2 μg phenol/mL of milk, which is just above the ALP value of milk samples heat-treated for 30 min. These newly proposed methodology and criteria could facilitate the microbiological quality control of milk.

Genetic control of residual variance of yearling weight in Nellore beef cattle.

Science.gov (United States)

Iung, L H S; Neves, H H R; Mulder, H A; Carvalheiro, R

2017-04-01

There is evidence for genetic variability in residual variance of livestock traits, which offers the potential for selection for increased uniformity of production. Different statistical approaches have been employed to study this topic; however, little is known about the concordance between them. The aim of our study was to investigate the genetic heterogeneity of residual variance on yearling weight (YW; 291.15 ± 46.67) in a Nellore beef cattle population; to compare the results of the statistical approaches, the two-step approach and the double hierarchical generalized linear model (DHGLM); and to evaluate the effectiveness of power transformation to accommodate scale differences. The comparison was based on genetic parameters, accuracy of EBV for residual variance, and cross-validation to assess predictive performance of both approaches. A total of 194,628 yearling weight records from 625 sires were used in the analysis. The results supported the hypothesis of genetic heterogeneity of residual variance on YW in Nellore beef cattle and the opportunity of selection, measured through the genetic coefficient of variation of residual variance (0.10 to 0.12 for the two-step approach and 0.17 for DHGLM, using an untransformed data set). However, low estimates of genetic variance associated with positive genetic correlations between mean and residual variance (about 0.20 for two-step and 0.76 for DHGLM for an untransformed data set) limit the genetic response to selection for uniformity of production while simultaneously increasing YW itself. Moreover, large sire families are needed to obtain accurate estimates of genetic merit for residual variance, as indicated by the low heritability estimates (Box-Cox transformation was able to decrease the dependence of the variance on the mean and decreased the estimates of genetic parameters for residual variance. The transformation reduced but did not eliminate all the genetic heterogeneity of residual variance, highlighting

Possibilities and limitations for sustainable bioenergy production systems

NARCIS (Netherlands)

Smeets, E.M.W.

2008-01-01

The focus of this thesis is on the possibilities and limitations of sustainable bioenergy production systems. First, the potential contribution of bioenergy to the energy supply in different world regions in the year 2050 from different biomass sources (dedicated woody energy crops, residues and

Mapping allostery through computational glycine scanning and correlation analysis of residue-residue contacts.

Science.gov (United States)

Johnson, Quentin R; Lindsay, Richard J; Nellas, Ricky B; Fernandez, Elias J; Shen, Tongye

2015-02-24

Understanding allosteric mechanisms is essential for the physical control of molecular switches and downstream cellular responses. However, it is difficult to decode essential allosteric motions in a high-throughput scheme. A general two-pronged approach to performing automatic data reduction of simulation trajectories is presented here. The first step involves coarse-graining and identifying the most dynamic residue-residue contacts. The second step is performing principal component analysis of these contacts and extracting the large-scale collective motions expressed via these residue-residue contacts. We demonstrated the method using a protein complex of nuclear receptors. Using atomistic modeling and simulation, we examined the protein complex and a set of 18 glycine point mutations of residues that constitute the binding pocket of the ligand effector. The important motions that are responsible for the allostery are reported. In contrast to conventional induced-fit and lock-and-key binding mechanisms, a novel "frustrated-fit" binding mechanism of RXR for allosteric control was revealed.

Microbial System for Identification of Antibiotic Residues in Milk

OpenAIRE

Nagel, Orlando Guillermo; Molina Pons, Mª Pilar; Althaus, Rafael Lisandro

2011-01-01

[EN] The aim of this study was to evaluate the ResScreen (R) microbiological system for the identification of antibiotic residues in milk. This microbiological system consists of two methods, the BT (betalactams and tetracyclines) and BS (betalactams and sulfamides) bioassays, containing spores of G. stearothermophilus subsp. calidolactis, culture media and indicators (acid-base and redox). The detection limits of 29 antimicrobial agents were calculated using a logistic regression model. ...

Assessment of human health risk associated with the presence of pesticides in chicken eggs

Directory of Open Access Journals (Sweden)

Almas HAMID

Full Text Available Abstract The presence of pesticides in the environment is highly toxic to environment and human health. Aim of the study was determination, quantification and assessment of associated health risk due to presence of pesticide residues in chicken eggs using high pressure liquid chromatography. HPLC method was successfully employed and validated. From collected samples pesticides were extracted in presence of petroleum ether and acetonitrile. Bifenthrin and Difenoconazole residues were found in all samples with different concentration exceeding maximum residue limits (MRL of Codex Alimentarius Commission. However imidacloprid was not detected in any sample. Concentration of bifenthrin in house egg samples ranged from 0.256206 to 4.112387 mg/kg while in poultry farm samples it varied from 1.5862 to 5.80796 mg/kg. Difenoconazole was found in concentration of 0.02835 mg/kg, 1.7668 mg/kg, 3.7205 mg/kg, 21.8937 mg/kg 21.9835 mg/kg, 19.26407 mg/kg in samples collected from houses while and in poultry farm samples its detected concentration was 10.939 mg/kg, 12.3296 mg/kg, 29.3617 mg/kg, 18.6116 mg/kg, 40.0523 mg/kg and 19.2335 mg/kg. Concentrations of both pesticides Bifenthrin and Difenoconazole exceeded the MRLs (0.05 mg/kg. Health risk index surpassed 1 (the cut off value for Difenoconazole in seven samples while for Bifenthrin values were less than 1, indicating the possibility of potential medium to long term health risk associated with ingestion of contaminated eggs.

Annotating Protein Functional Residues by Coupling High-Throughput Fitness Profile and Homologous-Structure Analysis

Directory of Open Access Journals (Sweden)

Yushen Du

2016-11-01

Full Text Available Identification and annotation of functional residues are fundamental questions in protein sequence analysis. Sequence and structure conservation provides valuable information to tackle these questions. It is, however, limited by the incomplete sampling of sequence space in natural evolution. Moreover, proteins often have multiple functions, with overlapping sequences that present challenges to accurate annotation of the exact functions of individual residues by conservation-based methods. Using the influenza A virus PB1 protein as an example, we developed a method to systematically identify and annotate functional residues. We used saturation mutagenesis and high-throughput sequencing to measure the replication capacity of single nucleotide mutations across the entire PB1 protein. After predicting protein stability upon mutations, we identified functional PB1 residues that are essential for viral replication. To further annotate the functional residues important to the canonical or noncanonical functions of viral RNA-dependent RNA polymerase (vRdRp, we performed a homologous-structure analysis with 16 different vRdRp structures. We achieved high sensitivity in annotating the known canonical polymerase functional residues. Moreover, we identified a cluster of noncanonical functional residues located in the loop region of the PB1 β-ribbon. We further demonstrated that these residues were important for PB1 protein nuclear import through the interaction with Ran-binding protein 5. In summary, we developed a systematic and sensitive method to identify and annotate functional residues that are not restrained by sequence conservation. Importantly, this method is generally applicable to other proteins about which homologous-structure information is available.

Heavy metal residues in beef carcasses in Beni-Suef abattoir, Egypt

Directory of Open Access Journals (Sweden)

Fathy A. Khalafalla

2011-09-01

Full Text Available A total of 300 samples were collected from cattle slaughtered in the Beni-Suef abattoir in Egypt. Samples included muscle, liver and kidney. Animals were randomly selected from the slaughter line. The age of the slaughtered cattle was less than three years (18-30 months. Samples were packed separately in plastic bags, identified and stored at -18°C until analysis which was performed at the Max Rubner Institute in Kulmbach, Germany, for the following heavy metals residues: lead, cadmium, mercury, arsenic, chromium and nickel in beef muscle, liver and kidney samples. The results revealed that the overall mean residual levels of lead were 8.77 µg/kg, 42.70 µg/kg and 109.42 µg/kg fresh weight in muscle, liver and kidney samples, respectively, while the mean residual levels of cadmium were 1.40 µg/kg, 14.16 µg/kg and 62.56 µg/kg fresh weight, respectively, and the mean arsenic residual levels were 5.06 µg/kg, 4.64 µg/kg and 14.92 µg/kg fresh weight, respectively. The mean residual levels of mercury were 3.91 µg/kg, 5.81 µg/kg and 10.14 µg/kg fresh weight, respectively, and the residual levels of chromium were 11.20 µg/kg, 21.85 µg/kg and 25.49 µg/kg fresh weight, respectively. Finally, the mean residual levels of nickel were 21.17 µg/kg, 14.59 µg/kg and 34.95 µg/kg fresh weight, respectively. The mean values of all heavy metals examined were low and did not exceed the permissible limits adopted by different organisations. Most heavy metals accumulated in higher concentrations in the kidney in comparison to the liver and muscle.

The development of a 4D treatment planning methodology to simulate the tracking of central lung tumors in an MRI-linac.

Science.gov (United States)

Al-Ward, Shahad M; Kim, Anthony; McCann, Claire; Ruschin, Mark; Cheung, Patrick; Sahgal, Arjun; Keller, Brian M

2018-01-01

Targeting and tracking of central lung tumors may be feasible on the Elekta MRI-linac (MRL) due to the soft-tissue visualization capabilities of MRI. The purpose of this work is to develop a novel treatment planning methodology to simulate tracking of central lung tumors with the MRL and to quantify the benefits in OAR sparing compared with the ITV approach. Full 4D-CT datasets for five central lung cancer patients were selected to simulate the condition of having 4D-pseudo-CTs derived from 4D-MRI data available on the MRL with real-time tracking capabilities. We used the MRL treatment planning system to generate two plans: (a) with a set of MLC-defined apertures around the target at each phase of the breathing ("4D-MRL" method); (b) with a fixed set of fields encompassing the maximum inhale and exhale of the breathing cycle ("ITV" method). For both plans, dose accumulation was performed onto a reference phase. To further study the potential benefits of a 4D-MRL method, the results were stratified by tumor motion amplitude, OAR-to-tumor proximity, and the relative OAR motion (ROM). With the 4D-MRL method, the reduction in mean doses was up to 3.0 Gy and 1.9 Gy for the heart and the lung. Moreover, the lung's V12.5 Gy was spared by a maximum of 300 cc. Maximum doses to serial organs were reduced by up to 6.1 Gy, 1.5 Gy, and 9.0 Gy for the esophagus, spinal cord, and the trachea, respectively. OAR dose reduction with our method depended on the tumor motion amplitude and the ROM. Some OARs with large ROMs and in close proximity to the tumor benefited from tracking despite small tumor amplitudes. We developed a novel 4D tracking methodology for the MRL for central lung tumors and quantified the potential dosimetric benefits compared with our current ITV approach. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Characterization Report on Sand, Slag, and Crucible Residues and on Fluoride Residues

International Nuclear Information System (INIS)

Murray, A.M.

1999-01-01

This paper reports on the chemical characterization of the sand, slag, and crucible (SS and C) residues and the fluoride residues that may be shipped from the Rocky Flats Environmental Technology Site (RFETS) to Savannah River Site (SRS)

Competitive PCR for quantification of minimal residual disease in acute lymphoblastic leukaemia

DEFF Research Database (Denmark)

Nyvold, C; Madsen, H O; Ryder, L P

2000-01-01

under identical conditions. After restriction enzyme cleavage, the PCR products originating from the competitor and the malignant clone can be distinguished by size in a gel electrophoresis step and the amount of residual disease can be determined. The method is very sensitive with a detection limit...

Effect of cooking on enrofloxacin residues in chicken tissue.

Science.gov (United States)

Lolo, M; Pedreira, S; Miranda, J M; Vázquez, B I; Franco, C M; Cepeda, A; Fente, C

2006-10-01

The aim of this study was to determine the effect of different cooking processes (microwaving, roasting, boiling, grilling and frying) on naturally incurred enrofloxacin residues in chicken muscle. Enrofloxacin and its metabolite, ciprofloxacin, were analysed using a validated LC-MS method with limits of detection (LOD) and quantification (LOQ), respectively, of 2 and 5 ng g-1 quinolones in muscle samples. The method was shown to be linear over the range 5-500 ng g-1. Mean intra-day relative standard deviation (RSD) at a concentration of 50 ng g-1 (n = 6) was 6%; inter-day RSD was 12%. A recovery study demonstrated that 65-101%, of the drug and metabolite could be recovered from the tissue. The RSD with naturally incurred roasted chicken breast was 9.18% at a concentration of 11 +/- 1.01 ng g-1 (n = 6). In water, enrofloxacin remained stable for 3 h when heated at 100 degrees C. It was concluded that residue data from raw tissue are valid for estimation of consumer exposure to this drug, as well as the ADI calculations because cooking procedures did not affect enrofloxacin residues, which remained stable during heating. However, there was an apparent decrease in quinolone concentration in tissue because some was lost by exudation into the liquid used for cooking. Conversely, for a cooking procedure with water loss, there was an apparent increase in residue concentration.

Accuracy of MRI diagnosis of internal derangement of the knee in a non-specialized tertiary level referral teaching hospital

International Nuclear Information System (INIS)

Challen, J.; Tang, Y. M.; Stuckey, S.; Hazratwala, K.

2007-01-01

Full text: This study was designed to assess the accuracy of knee MRl examinations carried out in a general tertiary referral hospital without a musculoskeletal fellowship trained radiologist. The study included all patients who had undergone a knee arthroscopy carried out within a 2-year period and who had had a prior MRl knee examination, where both were carried out at this institution. The accuracy of the MRl knee examination was determined by correlation to the arthroscopy report. The accuracy for diagnosis of meniscal and cartilage injuries, in this setting, was found to be similar to a published meta-analysis of previous studies correlating knee MRl and arthroscopy. The overall accuracy of this study was better than the previous similar study. However, the accuracy for diagnosing ACL injuries was lower than in the meta-analysis. The potential reasons for this and other sources of error are discussed

Elution behaviour of solid residues from thermal waste treatment and disposal

International Nuclear Information System (INIS)

Vetter, G.

1992-01-01

In the research part carried through so far, the leaching behaviour of residues of different waste combustion methods was compared with that of other materials frequently deposited at landfills as regards heavy metals and anions. Furthermore, specifically residues from different types of waste subjected to the Siemens semicoking process were investigated. The leaching behaviour of well vitrified slags approaches very much the favourable values of melting-chamber granulate from a black-coal-fired power plant. By contrast, poorly vitrified slags or slags from an ordinary waste combustion plant yield eluate concentrations exceeding in part the limiting values applicable to landfilling material. With vitrified slags, the type of waste burnt has no recognizable influence on leaching behaviour. (orig.) [de

Residual stress by repair welds

International Nuclear Information System (INIS)

Mochizuki, Masahito; Toyoda, Masao

2003-01-01

Residual stress by repair welds is computed using the thermal elastic-plastic analysis with phase-transformation effect. Coupling phenomena of temperature, microstructure, and stress-strain fields are simulated in the finite-element analysis. Weld bond of a plate butt-welded joint is gouged and then deposited by weld metal in repair process. Heat source is synchronously moved with the deposition of the finite-element as the weld deposition. Microstructure is considered by using CCT diagram and the transformation behavior in the repair weld is also simulated. The effects of initial stress, heat input, and weld length on residual stress distribution are studied from the organic results of numerical analysis. Initial residual stress before repair weld has no influence on the residual stress after repair treatment near weld metal, because the initial stress near weld metal releases due to high temperature of repair weld and then stress by repair weld regenerates. Heat input has an effect for residual stress distribution, for not its magnitude but distribution zone. Weld length should be considered reducing the magnitude of residual stress in the edge of weld bead; short bead induces high tensile residual stress. (author)

Distribution and persistence of the anti sea-lice drug teflubenzuron in wild fauna and sediments around a salmon farm, following a standard treatment

International Nuclear Information System (INIS)

Samuelsen, Ole B.; Lunestad, Bjørn T.; Hannisdal, Rita; Bannister, Raymond; Olsen, Siri; Tjensvoll, Tore; Farestveit, Eva; Ervik, Arne

2015-01-01

The salmon louse (Lepeoptheirus salmonis) is a challenge in the farming of Atlantic salmon (Salmo salar). To treat an infestation, different insecticides are used like the orally administered chitin synthetase inhibitor teflubenzuron. The concentrations and distribution of teflubenzuron were measured in water, organic particles, marine sediment and biota caught in the vicinity of a fish farm following a standard medication. Low concentrations were found in water samples whereas the organic waste from the farm, collected by sediment traps had concentrations higher than the medicated feed. Most of the organic waste was distributed to the bottom close to the farm but organic particles containing teflubenzuron were collected 1100 m from the farm. The sediment under the farm consisted of 5 to 10% organic material and therefore the concentration of teflubenzuron was much lower than in the organic waste. Teflubenzuron was persistent in the sediment with a stipulated halflife of 170 days. Sediment consuming polychaetes had high but decreasing concentrations of teflubenzuron throughout the experimental period, reflecting the decrease of teflubenzuron in the sediment. During medication most wild fauna contained teflubenzuron residues and where polychaetes and saith had highest concentrations. Eight months later only polychaetes and some crustaceans contained drug residues. What dosages that induce mortality in various crustaceans following short or long-term exposure is not known but the results indicate that the concentrations in defined individuals of king crab, shrimp, squat lobster and Norway lobster were high enough shortly after medication to induce mortality if moulting was imminent. Considering food safety, saith and the brown meat of crustaceans contained at first sampling concentrations of teflubenzuron higher than the MRL-value set for Atlantic salmon. The concentrations were, however, moderate and the amount of saith fillet or brown meat of crustaceans to be

Distribution and persistence of the anti sea-lice drug teflubenzuron in wild fauna and sediments around a salmon farm, following a standard treatment

Energy Technology Data Exchange (ETDEWEB)

Samuelsen, Ole B. [Institute of Marine Research, P.O. Box 1870 Nordnes, N-5817 Bergen (Norway); Lunestad, Bjørn T.; Hannisdal, Rita [National Institute of Nutrition and Seafood Research, P.O. Box 2029 Nordnes, N-5817 Bergen (Norway); Bannister, Raymond; Olsen, Siri [Institute of Marine Research, P.O. Box 1870 Nordnes, N-5817 Bergen (Norway); Tjensvoll, Tore [National Institute of Nutrition and Seafood Research, P.O. Box 2029 Nordnes, N-5817 Bergen (Norway); Farestveit, Eva; Ervik, Arne [Institute of Marine Research, P.O. Box 1870 Nordnes, N-5817 Bergen (Norway)

2015-03-01

The salmon louse (Lepeoptheirus salmonis) is a challenge in the farming of Atlantic salmon (Salmo salar). To treat an infestation, different insecticides are used like the orally administered chitin synthetase inhibitor teflubenzuron. The concentrations and distribution of teflubenzuron were measured in water, organic particles, marine sediment and biota caught in the vicinity of a fish farm following a standard medication. Low concentrations were found in water samples whereas the organic waste from the farm, collected by sediment traps had concentrations higher than the medicated feed. Most of the organic waste was distributed to the bottom close to the farm but organic particles containing teflubenzuron were collected 1100 m from the farm. The sediment under the farm consisted of 5 to 10% organic material and therefore the concentration of teflubenzuron was much lower than in the organic waste. Teflubenzuron was persistent in the sediment with a stipulated halflife of 170 days. Sediment consuming polychaetes had high but decreasing concentrations of teflubenzuron throughout the experimental period, reflecting the decrease of teflubenzuron in the sediment. During medication most wild fauna contained teflubenzuron residues and where polychaetes and saith had highest concentrations. Eight months later only polychaetes and some crustaceans contained drug residues. What dosages that induce mortality in various crustaceans following short or long-term exposure is not known but the results indicate that the concentrations in defined individuals of king crab, shrimp, squat lobster and Norway lobster were high enough shortly after medication to induce mortality if moulting was imminent. Considering food safety, saith and the brown meat of crustaceans contained at first sampling concentrations of teflubenzuron higher than the MRL-value set for Atlantic salmon. The concentrations were, however, moderate and the amount of saith fillet or brown meat of crustaceans to be

Manufacturing inspection of electrical steels using Magnetic Barkhausen Noise: residual stress detection

Energy Technology Data Exchange (ETDEWEB)

Samimi, A.A., E-mail: 9aa8@queensu.ca [Queen' s Univ., Applied Magnetics Group, Kingston, Ontario (Canada); Krause, T.W. [Royal Military College of Canada, NDE Lab., Kingston, Ontario (Canada); Clapham, L. [Queen' s Univ., Applied Magnetics Group, Kingston, Ontario (Canada); Gallaugher, M.; Ding, Y.; Chromik, R. [McGill Univ., Dept. of Mining and Materials Engineering, Montreal, Quebec (Canada)

2016-09-15

Non-oriented Electrical Steel (NOES) is the magnetic core lamination material used for flux transfer in rotary machines. The presence of residual stress associated with material processing may be detrimental to magnetic domain structure refinement and as a result, magnetic performance of NOES. Therefore, manufacturing inspection of NOES that identifies the presence of residual stress could contribute to the production of more energy efficient cores. However, standard materials evaluation is limited to destructive and off-line techniques. The present work employed Magnetic Barkhausen Noise (MBN) for nondestructive identification of local residual stress associated with stages in material processing. Analysis of MBN from single strips of NOES demonstrated clear response to applied tensile stress, mechanical shearing, the presence of an insulating coating and punching. The results establish the potential of MBN as a nondestructive testing technology for quality control of electrical steels at various stages of manufacture. (author)

[Determination of residual solvents in 7-amino-3-chloro cephalosporanic acid by gas chromatography].

Science.gov (United States)

Ma, Li; Yao, Tong-wei

2011-01-01

To develop a gas chromatography method for determination of residual solvents in 7-amino-3-chloro cephalosporanic acid (7-ACCA). The residual levels of acetone, methanol, dichloromethane, ethyl acetate, isobutanol, pyridine and toluene in 7-ACCA were measured by gas chromatography using Agilent INNOWAX capillary column (30 m × 0.32 mm,0.5 μm). The initial column temperature was 70° maintained for 6 min and then raised (10°C/min) to 160°C for 1 min. Nitrogen gas was used as carrier and FID as detector. The flow of carrier was 1.0 ml/min, the temperature of injection port and detector was 200°C and 250°C, respectively. The limits of detection for acetone, methanol, dichloromethane, ethyl acetate, isobutanol, pyridine, toluene in 7-ACCA were 2.5 μg/ml, 1.5 μg/ml, 15 μg/ml, 2.5 μg/ml, 2.5 μg/ml, 2.5 μg/ml and 11 μg/ml, respectively. Only acetone was detected in the sample, and was less than the limits of Ch.P. The method can effectively detect the residual solvents in 7-ACCA.

Validation of a method for the determination of 120 pesticide residues in apples and cucumbers by LC-MS/MS.

Science.gov (United States)

Ramadan, Gouda; Al Jabir, Muna; Alabdulmalik, Najat; Mohammed, Ali

2016-05-01

Most countries have clearly defined regulations governing the use of pesticides in agricultural activity. The application of pesticides in agriculture usually leads to a residual amount of these pesticides on food products such as fruit and vegetables. The presence of pesticide residues on these foods destined for human consumption may pose food safety risks to consumers. To protect consumers, national authorities have established maximum limits for pesticide residues in foods. These limits can only be enforced if there are methods available to detect and monitor their concentrations in the applicable food products. To support the enforcement of this legislation, we have developed a multi-residue liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the analysis of 120 pesticide residues in apples and cucumbers which has been validated and implemented in the routine monitoring and surveillance programme for these pesticides. In this method, apple and cucumber samples are extracted using the QuEChERS method (quick, easy, cheap, effective, rugged, and safe) and the extracts were analyzed directly by LC-MS/MS. The mean recoveries at three different concentrations of 0.01 µg/g , 0.05 µg/g, and 0.1 µg/g over the analytical range varied between 70 and 120%. The repeatability of the method expressed as %RSD was less than 20%. The limit of detection (LOD) of the method ranged between 0.0014 and 0.0110 µg/g for apples and between 0.0012 and 0.0075 µg/g for cucumbers. The limit of quantification (LOQ) of the method was 0.01 µg/g for apples and cucumbers. The method has been used for the analysis of over 600 apple and 550 cucumber samples over the past two years. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Reactivity of Athabasca residue and of its SARA fractions during residue hydroconversion

Energy Technology Data Exchange (ETDEWEB)

Verstraete, J.; Danial-Fortain, P.; Gauthier, T.; Merdrignac, I. [IFP-Lyon, Vermaison (France); Budzinski, H. [Bordeaux Univ. (France). ISM-LPTC, UMR CNRS

2009-07-01

Residue conversion processes are becoming increasingly important because of the declining market for residual fuel oil and a greater demand for middle distillates. Ebullated-bed hydroconversion is a commercially proven technology for converting heavy feedstocks with high amounts of impurities. The process enables the conversion of atmospheric or vacuum residues at temperatures up to 440 degrees C, and at liquid hourly space velocity (LHSV) conditions in the range of 0.15 to 0.5 per hour. A 540 degrees C conversion of up to 80 weight per cent can be achieved under these conditions. This paper reported on a research study conducted at IFP Lyon in which the residue hydroconversion in a large-scale ebullated bed bench unit was investigated to determine the impact of operating conditions and feed properties on yield and product qualities. Hydrogen was added to the feed in the bench units to keep a high hydrogen partial pressure and favour the catalytic hydroconversion reactions. In a typical test, the reactor was fed with 50 g of feedstock and 0.45 g of crushed equilibrium industrial NiMo catalyst, pressurized hydrogen and quickly heated at the reaction temperature. This paper also discussed the conversion of Athabasca bitumen residue in the large-scale pilot plant and also in the small scale batch reactor. The effect of operating temperature and space velocity was examined. The reactivity of the saturates, aromatics, resins and asphaltenes (SARA) fractions of the bitumen was studied separately in order to better understand the conversion mechanisms and reactivities. The Athabasca bitumen feed and SARA fractions were also analyzed in terms of standard petroleum analysis, SARA fractionation, elemental analysis, size exclusion chromatography (SEC) and 13C NMR. Hydroconversion experiments were conducted in the batch unit at different reaction temperatures and reaction times. A comparison of small-scale batch results with those obtained with the continuous large-scale bench

[Determination of residual toluene diisocyanate in sponge bra by gas chromatography].

Science.gov (United States)

Wang, Aixia; Ye, Ping; Huang, Nan; Chen, Yan; Li, Xinggen

2017-06-08

A gas chromatography (GC) with internal standard method was developed for the determination of residual toluene diisocyanate (TDI) in sponge bra. The samples were extracted with ethyl acetate dehydrated, and cleaned up with 0.22 μm microfiltration membrane. The residual toluene diisocyanate was separated on a DB-624 capillary column using temperature programming. The flame ionization detector (FID) was used at 250 ℃. The inlet temperature was 180 ℃ with nitrogen as carrier gas. The linear range was 10-200 mg/L ( R 2 =0.9989) for TDI. The average recovery ranged from 80.5% to 91.6% with RSD not more than 7.9%( n =6). The limit of detection (LOD) and limit of quantification (LOQ) were 10 mg/kg and 100 mg/kg, respectively. The developed method was then utilized to analyse the 100 batches of sponge bra samples from the manufacturing enterprises, the entity shops and electric business platforms. The method is simple, time-saving and environment friendly with high sensitivity and good reproducibility, and has practical application value due to its low-cost and short-circle.

Total and occluded residual gas content inside the nuclear fuel pellets

International Nuclear Information System (INIS)

Moura, Sergio C.; Fernandes, Carlos E.; Oliveira, Justine R.; Machado, Joyce F.; Guglielmo, Luisa M.; Bustillos, Oscar V.

2009-01-01

This work describes three techniques available to measure total and occluded residual gases inside the UO 2 nuclear fuel pellets. Hydrogen is the major gas compound inside these pellets, due to sintering fabrication process but Nitrogen is present as well, due to storage atmosphere fuel. The total and occluded residual gas content inside these pellets is a mandatory requirement in a quality control to assure the well function of the pellets inside the nuclear reactor. This work describes the Gas Extractor System coupled with mass spectrometry GES/MS, the Gas Extractor System coupled with gas chromatography GES/GC and the total Hydrogen / Nitrogen H/N analyzer as well. In the GES, occlude gases in the UO 2 pellets is determinate using a high temperature vacuum extraction system, in which the minimum limit of detection is in the range 0.002 cc/g. The qualitative and quantitative determination of the amount of gaseous components employs a mass spectrometry or a gas chromatography technique. The total Hydrogen / Nitrogen analyzer employ a thermal conductivity gas detector linked to a gaseous extractor furnace which has a detection limit is in the range 0.005 cc/g. The specification for the residual gas analyses in the nuclear fuel pellets is 0.03 cc/g, all techniques satisfy the requirement but not the nature of the gases due to reaction with the reactor cladding. The present work details the chemical reaction among Hydrogen / Nitrogen and nuclear reactor cladding. (author)

Highly sensitive and selective colorimetric detection of cartap residue in agricultural products.

Science.gov (United States)

Liu, Wei; Zhang, Daohong; Tang, Yafan; Wang, Yashan; Yan, Fei; Li, Zhonghong; Wang, Jianlong; Zhou, H Susan

2012-11-15

The residue of pesticide has posed a serious threat to human health. Fast, broad-spectrum detection methods are necessary for on-site screening of various types of pesticides. With citrate-coated Au nanoparticles (Au NPs) as colorimetric probes, a visual and spectrophotometric method for rapid assay of cartap, which is one of the most important pesticides in agriculture, is reported for the first time. Based on the color change of Au colloid solution from wine-red to blue resulting from the aggregation of Au NPs, cartap could be detected in the concentration range of 0.05-0.6 mg/kg with a low detection limit of 0.04 mg/kg, which is much lower than the strictest cartap safety requirement of 0.1 mg/kg. Due to the limited research on the rapid detection of cartap based on Au NPs, the performance of the present method was evaluated through aggregation kinetics, interference influence, and sample pretreatment. To further demonstrate the selectivity and applicability of the method, cartap detection is realized in cabbage and tea with excellent analyte concentration recovery. These results demonstrate that the present method provides an easy and effective way to analyze pesticide residue in common products, which is of benefit for the rapid risk evaluation and on-site screening of pesticide residue. Copyright © 2012 Elsevier B.V. All rights reserved.

Behavioral Deficits Are Accompanied by Immunological and Neurochemical Changes in a Mouse Model for Neuropsychiatric Lupus (NP-SLE)

DEFF Research Database (Denmark)

Li, Yan; Eskelund, Amanda; Zhou, H

2015-01-01

pathophysiological mechanisms responsible for NP-SLE are increased peripheral pro-inflammatory cytokines, subsequent induction of indoleamine-2,3-dioxygenase (IDO) and activation of the kynurenine pathway. In the MRL/MpJ-Faslpr (MRL/lpr) murine model of lupus, depression-like behavior and cognitive dysfunction...

Insecticide residues in stored grains in Sonora, Mexico: quantification and toxicity testing.

Science.gov (United States)

Aldana-Madrid, M L; Valdez-Hurtado, S; Vargas-Valdez, N D; Salazar-Lopez, N J; Silveira-Gramont, M I; Loarca-Piña, F G; Rodríguez-Olibarria, G; Wong-Corral, F J; Borboa-Flores, J; Burgos-Hernández, A

2008-02-01

Food safety has acquired great attention by food importer and exporters. Food rejection or acceptance across international borders is based on the compliance with international food regulations. Due to the lack of recent data on pesticide residues in Mexican grains, this study focused on detecting and quantifying insecticide residues in stored wheat, corn, chickpeas, and beans, as well as to determine their mutagenic potential. Grains were sampled from primary storage sites in Sonora, Mexico. Malathion, chlorpyrifos, deltamethrin, cypermethrin, 4,4-DDE, 4,4-DDD and 4,4-DDT were analyzed in 135 samples. Grain samples were not mutagenic and most pesticide levels were within regulation limits.

Food processing as a means for pesticide residue dissipation

Directory of Open Access Journals (Sweden)

Đorđević Tijana

2016-01-01

Full Text Available Pesticides are one of the major inputs used for increasing agricultural productivity of crops. However, their inadequate application may produce large quantities of residues in the environment and, once the environment is contaminated with pesticides, they may easily enter into the human food chain through plants, creating a potentially serious health hazard. Nowadays, consumers are becoming more aware of the importance of safe and high quality food products. Thus it is pertinent to explore simple, cost-effective strategies for decontaminating food from pesticides. Various food processing techniques, at industrial and/or domestical level, have been found to significantly reduce the contents of pesticide residues in most food materials. The extent of reduction varies with the nature of pesticides, type of commodity and processing steps. Pesticides, especially those with limited movement and penetration ability, can be removed with reasonable efficiency by washing, and the effectiveness of washing depends on pesticide solubility in water or in different chemical solvents. Peeling of fruit and vegetable skin can dislodge pesticide residues to varying degrees, depending on constitution of a commodity, chemical nature of the pesticide and environmental conditions. Different heat treatments (drying, pasteurization, sterilization, blanching, steaming, boiling, cooking, frying or roasting during various food preparation and preservation processes can cause losses of pesticide residues through evaporation, co-distillation and/or thermal degradation. Product manufactures, from the simplest grain milling, through oil extraction and processing, juicing/pureeing or canning of fruits and vegetables, to complex bakery and dairy production, malting and brewing, wine making and various fermentation processes, play a role in the reduction of pesticide contents, whereby each operation involved during processing usually adds to a cumulative effect of reduction of

Lemna minor tolerance to metal-working fluid residues: implications for rhizoremediation.

Science.gov (United States)

Grijalbo, L; Becerril, J M; Barrutia, O; Gutierrez-Mañero, J; Lucas Garcia, J A

2016-07-01

For the first time in the literature, duckweed (Lemna minor) tolerance (alone or in combination with a consortium of bacteria) to spent metal-working fluid (MWF) was assessed, together with its capacity to reduce the chemical oxygen demand (COD) of this residue. In a preliminary study, L. minor response to pre-treated MWF residue (ptMWF) and vacuum-distilled MWF water (MWFw) was tested. Plants were able to grow in both residues at different COD levels tested (up to 2300 mg·l(-1) ), showing few toxicity symptoms (mainly growth inhibition). Plant response to MWFw was more regular and dose responsive than when exposed to ptMWF. Moreover, COD reduction was less significant in ptMWF. Thus, based on these preliminary results, a second study was conducted using MWFw to test the effectiveness of inoculation with a bacterial consortium isolated from a membrane bioreactor fed with the same residue. After 5 days of exposure, COD in solutions containing inoculated plants was significantly lower than in non-inoculated ones. Moreover, inoculation reduced β+γ-tocopherol levels in MWFw-exposed plants, suggesting pollutant imposed stress was reduced. We therefore conclude from that L. minor is highly tolerant to spent MWF residues and that this species can be very useful, together with the appropriate bacterial consortium, in reducing COD of this residue under local legislation limits and thus minimise its potential environmental impact. Interestingly, the lipophilic antioxidant tocopherol (especially the sum of β+γ isomers) proved to be an effective plant biomarker of pollution. © 2016 German Botanical Society and The Royal Botanical Society of the Netherlands.

Analysis of biosurfactants from industrially viable Pseudomonas strain isolated from crude oil suggests how rhamnolipids congeners affect emulsification property and antimicrobial activity.

Science.gov (United States)

Das, Palashpriya; Yang, Xin-Ping; Ma, Luyan Z

2014-01-01

Rhamnolipid biosurfactants produced mainly by Pseudomonas sp. had been reported to possess a wide range of potential industrial application. These biosurfactants are produced as monorhamnolipid (MRL) and di-rhamnolipid (DRL) congeners. The present study deals with rhamnolipid biosurfactants produced by three bacterial isolates from crude oil. Biosurfactants produced by one of the strains (named as IMP67) was found to be very efficacious based on its critical micelle concentration value and hydrocarbon emulsification property. Strikingly, antimicrobial, and anti-biofilm potential of this biosurfactant were higher than biosurfactants produced by other two strains. Thin layer chromatography analysis and rhamnose quantification showed that the rhamnolipids of IMP67 had more MRL congeners than biosurfactants of the other two strains. Emulsification and antimicrobial actions were affected by manual change of MRL and DRL congener proportions. Increase of MRL proportion enhanced emulsification index and antimicrobial property to Gram negative bacteria. This result indicated that the ratio of MRL and DRL affected the emulsification potentials of rhamnolipids, and suggested that high emulsification potentials might enhance rhamnolipids to penetrate the cell wall of Gram negative bacteria. In line with this finding, rhamnolipids of IMP67 also reduced the MIC of some antibiotics against bacteria, suggesting their synergistic role with the antibiotics.

Analysis of biosurfactants from industrially-viable Pseudomonas strain isolated from crude oil suggests how rhamnolipids congeners affect on emulsification property and antimicrobial activity

Directory of Open Access Journals (Sweden)

Palashpriya eDas

2014-12-01

Full Text Available Rhamnolipid biosurfactants produced mainly by Pseudomonas sp. had been reported to possess a wide range of potential industrial application. These biosurfactants are produced as monorhamnolipid (MRL and di-rhamnolipid (DRL congeners. The present study deals with rhamnolipid biosurfactants produced by three bacterial isolates from crude oil. Biosurfactants produced by one of the strains (named as IMP67 was found to be very efficacious based on its critical micelle concentration (CMC value and hydrocarbon emulsification property. Strikingly, antimicrobial and anti-biofilm potential of this biosurfactant were higher than biosurfactants produced by other two strains. Thin layer chromatography (TLC analysis and rhamnose quantification showed that the rhamnolipids of IMP67 had more MRL congeners than biosurfactants of the other two strains. Emulsification and antimicrobial actions were affected by manual change of MRL and DRL congener proportions. Increase of MRL proportion enhanced emulsification index and antimicrobial property to Gram negative bacteria. This result indicated that the ratio of MRL and DRL affect the emulsification potentials of rhamnolipids, and suggested that high emulsification potentials might enhance rhamnolipids to penetrate the cell wall of Gram negative bacteria. In consistent, rhamnolipids of IMP67 reduced the MIC of some antibiotics against bacteria, suggesting the potential of biosurfactant as antibiotics synergist.

Morphology and composition of pyrotechnic residues formed at different levels of confinement.

Science.gov (United States)

Vermeij, Erwin; Duvalois, Willem; Webb, Rutger; Koeberg, Mattijs

2009-04-15

Post explosion residues (PER) are residues from pyrotechnic compositions or explosives that are generated during an explosion. In the recent past SEM/EDX was used several times to analyze PER from pyrotechnic compositions. The results from these studies suggest that there might be a difference in morphology and composition of pyrotechnic residues formed at different levels of confinement. Also because of general thermodynamic principles it is believed that at higher levels of confinement the final pressure and temperature during the explosion is probably (but not necessarily) higher, eventually resulting in smaller and more spherical particles and a more homogeneous elemental composition. If there is a relation between morphology and composition of pyrotechnic residues and the level of confinement at which these are formed, it would be possible to draw conclusions about the conditions at which pyrotechnic residues were formed and the kind and construction of the device used. This may aid forensic scientists not only in the determination of the original explosive composition, but also of the explosive device. To perform controlled experiments with pyrotechnic charges at, at least, two pre-set levels of confinement a test vessel was built by TNO Defence, Security and Safety. For this study, three different flash powder compositions and black powder were selected. The generated residues were sampled on collecting plates and Nucleopore filters connected to a pump system in the immediate vicinity of the venting area for further analyses by SEM/EDX and XRD. From the results it follows that in the pressure range studied, the level of confinement seems to have a minor effect on the features of the generated residue particles. Because passive sampling by means of collector plates seemed doubtful and because the number of experiments had to be limited it is impossible to draw definitive conclusions. In addition to the level of confinement several other variables may affect

Autoresonant-spectrometric determination of the residual gas composition in the ALPHA experiment apparatus

Energy Technology Data Exchange (ETDEWEB)

Amole, C.; Capra, A.; Menary, S. [Department of Physics and Astronomy, York University, Toronto, Ontario M3J 1P3 (Canada); Ashkezari, M. D.; Hayden, M. E. [Department of Physics, Simon Fraser University, Burnaby, British Columbia V5A 1S6 (Canada); Baquero-Ruiz, M.; Chapman, S.; Little, A.; Povilus, A.; So, C.; Turner, M. [Department of Physics, University of California, Berkeley, California 94720-7300 (United States); Bertsche, W. [Department of Physics, Swansea University, Swansea SA2 8PP (United Kingdom); School of Physics and Astronomy, University of Manchester, Manchester M13 9PL, United Kingdom and The Cockcroft Institute, Daresbury Laboratory, Warrington WA4 4AD (United Kingdom); Butler, E. [Physics Department, CERN, CH-1211 Geneva 23 (Switzerland); Cesar, C. L.; Silveira, D. M. [Instituto de Fisica, Universidade Federal do Rio de Janeiro, Rio de Janeiro 21941-972 (Brazil); Charlton, M.; Eriksson, S.; Isaac, C. A.; Madsen, N.; Napoli, S. C. [Department of Physics, Swansea University, Swansea SA2 8PP (United Kingdom); Collaboration: ALPHA Collaboration; and others

2013-06-15

Knowledge of the residual gas composition in the ALPHA experiment apparatus is important in our studies of antihydrogen and nonneutral plasmas. A technique based on autoresonant ion extraction from an electrostatic potential well has been developed that enables the study of the vacuum in our trap. Computer simulations allow an interpretation of our measurements and provide the residual gas composition under operating conditions typical of those used in experiments to produce, trap, and study antihydrogen. The methods developed may also be applicable in a range of atomic and molecular trap experiments where Penning-Malmberg traps are used and where access is limited.

Identification of residue pairing in interacting β-strands from a predicted residue contact map.

Science.gov (United States)

Mao, Wenzhi; Wang, Tong; Zhang, Wenxuan; Gong, Haipeng

2018-04-19

Despite the rapid progress of protein residue contact prediction, predicted residue contact maps frequently contain many errors. However, information of residue pairing in β strands could be extracted from a noisy contact map, due to the presence of characteristic contact patterns in β-β interactions. This information may benefit the tertiary structure prediction of mainly β proteins. In this work, we propose a novel ridge-detection-based β-β contact predictor to identify residue pairing in β strands from any predicted residue contact map. Our algorithm RDb 2 C adopts ridge detection, a well-developed technique in computer image processing, to capture consecutive residue contacts, and then utilizes a novel multi-stage random forest framework to integrate the ridge information and additional features for prediction. Starting from the predicted contact map of CCMpred, RDb 2 C remarkably outperforms all state-of-the-art methods on two conventional test sets of β proteins (BetaSheet916 and BetaSheet1452), and achieves F1-scores of ~ 62% and ~ 76% at the residue level and strand level, respectively. Taking the prediction of the more advanced RaptorX-Contact as input, RDb 2 C achieves impressively higher performance, with F1-scores reaching ~ 76% and ~ 86% at the residue level and strand level, respectively. In a test of structural modeling using the top 1 L predicted contacts as constraints, for 61 mainly β proteins, the average TM-score achieves 0.442 when using the raw RaptorX-Contact prediction, but increases to 0.506 when using the improved prediction by RDb 2 C. Our method can significantly improve the prediction of β-β contacts from any predicted residue contact maps. Prediction results of our algorithm could be directly applied to effectively facilitate the practical structure prediction of mainly β proteins. All source data and codes are available at http://166.111.152.91/Downloads.html or the GitHub address of https://github.com/wzmao/RDb2C .

Fusion evaporation-residue cross sections for 28Si+40Ca at E(28Si)=309, 397, and 452 MeV

International Nuclear Information System (INIS)

Vineyard, M.F.; Bauer, J.S.; Crum, J.F.; Gosdin, C.H.; Trotter, R.S.; Kovar, D.G.; Beck, C.; Henderson, D.J.; Janssens, R.V.F.; Wilkins, B.D.; Maguire, C.F.; Mateja, J.F.; Prosser, F.W.; Stephans, G.S.F.

1992-01-01

Velocity distributions of mass-identified evaporation residues produced in the 28 Si+ 40 Ca reaction have been measured at bombarding energies of 309, 397, and 452 MeV using time-of-flight techniques. These distributions were used to identify evaporation residues and to separate the complete-fusion and incomplete-fusion components. Angular distributions and upper limits for the total evaporation-residue and complete-fusion evaporation-residue cross sections were extracted at all three bombarding energies. The complete-fusion evaporation-residue cross sections and the deduced critical angular momenta are compared with earlier measurements and the predictions of existing models. The ratios of the complete-fusion evaporation-residue cross section to the total evaporation-residue cross section, along with those measured for the 28 Si+ 12 C and 28 Si+ 28 Si systems at the same energies, support the entrance-channel mass-asymmetry dependence of the incomplete-fusion evaporation-residue process reported earlier

Dissipation pattern of flubendiamide residues on capsicum fruit (Capsicum annuum L.) under field and controlled environmental conditions.

Science.gov (United States)

Buddidathi, Radhika; Mohapatra, Soudamini; Siddamallaiah, Lekha; Manikrao, Gourishankar; Hebbar, Shibara Shankara

2016-01-01

This investigation was undertaken to compare the dissipation pattern of flubendiamide in capsicum fruits under poly-house and open field after giving spray applications at the recommended and double doses of 48 g a.i. ha(-1) and 96 g a.i. ha(-1). Extraction and purification of capsicum fruit samples were carried out by the QuEChERS method. Residues of flubendiamide and its metabolite, des-iodo flubendiamide, were analyzed by high-performance liquid chromatography-photodiode array, and confirmed by liquid chromatography-mass spectrometry/mass spectrometry. Limit of quantification of the method was 0.05 mg kg(-1), and recovery of the insecticides was in the range of 89.6-104.3%, with relative standard deviation being 4.5-11.5%. The measurement uncertainty of the analytical method was in the range of 10.7-15.7%. Initial residue deposits of flubendiamide on capsicum fruits grown under poly-house conditions were (0.977 and 1.834 mg kg(-1)) higher than that grown in the field (0.665 and 1.545 mg kg(-1)). Flubendiamide residues persisted for 15 days in field-grown and for 25 days in poly-house-grown capsicum fruits. The residues were degraded with the half-lives of 4.3-4.7 and 5.6-6.6 days in field and poly-house respectively. Des-iodo flubendiamide was not detected in capsicum fruits or soil. The residues of flubendiamide degraded to below the maximum residue limit notified by Codex Alimentarius Commission (FAO/WHO) after 1 and 6 days in open field, and 3 and 10 days in poly-house. The results of the study indicated that flubendiamide applied to capsicum under controlled environmental conditions required longer pre-harvest interval to allow its residues to dissipate to the safe level.

Residuals and the Residual-Based Statistic for Testing Goodness of Fit of Structural Equation Models

Science.gov (United States)

Foldnes, Njal; Foss, Tron; Olsson, Ulf Henning

2012-01-01

The residuals obtained from fitting a structural equation model are crucial ingredients in obtaining chi-square goodness-of-fit statistics for the model. The authors present a didactic discussion of the residuals, obtaining a geometrical interpretation by recognizing the residuals as the result of oblique projections. This sheds light on the…

Detection of pyridaben residue levels in hot pepper fruit and leaves by liquid chromatography-tandem mass spectrometry: effect of household processes.

Science.gov (United States)

Kim, Sung-Woo; Abd El-Aty, A M; Rahman, Md Musfiqur; Choi, Jeong-Heui; Choi, Ok-Ja; Rhee, Gyu-Seek; Chang, Moon-Ik; Kim, Heejung; Abid, Morad D N; Shin, Sung Chul; Shim, Jae-Han

2015-07-01

Following quick, easy, cheap, effective, rugged and safe (QuEChERS) and LC/MS/MS analysis, pyridaben residual levels were determined in unprocessed and processed hot pepper fruit and leaves. The linearities were satisfactory with determination coefficients (R(2)) in excess of 0.995 in processed and unprocessed pepper fruit and leaves. Recoveries at various concentrations were 79.9-105.1% with relative standard deviations ≤15%. The limits of quantitation of 0.003-0.012 mg/kg were very low compared with the maximum residue limits (2-5 mg/kg) set by the Ministry of Food and Drug Safety, Republic of Korea. The effects of various household processes, including washing, blanching, frying and drying under different conditions (water volume, blanching time and temperature) on residual concentrations were evaluated. Both washing and blanching (in combination with high water volume and time factor) significantly reduced residue levels in hot pepper fruit and leaves compared with other processes. In sum, the developed method was satisfactory and could be used to accurately detect residues in unprocessed and processed pepper fruit and leaves. It is recommended that pepper fruit/leaves be blanched after washing before being consumed to protect consumers from the negative health effects of detected pesticide residues. Copyright © 2014 John Wiley & Sons, Ltd.

Machine for compacting solid residues

International Nuclear Information System (INIS)

Herzog, J.

1981-11-01

Machine for compacting solid residues, particularly bulky radioactive residues, constituted of a horizontally actuated punch and a fixed compression anvil, in which the residues are first compacted horizontally and then vertically. Its salient characteristic is that the punch and the compression anvil have embossments on the compression side and interpenetrating plates in the compression position [fr

Oscillations and residual displacements of buildings of varying heights and widths, constructed on elastic-plastic base

Directory of Open Access Journals (Sweden)

Ter-Martirosyan Zaven

2016-01-01

Full Text Available Modern regulations in the field of design and construction of buildings in seismically dangerous areas provide for stability calculation of bases, foundations and underground structures, i.e. calculations for the first group of limited states. At the same time, calculations for the second group of limited states, like deformations (yields, relative difference in yields, as a rule, are not fulfilled. This state of affairs is due to insufficient knowledge of the issues of appearance and development of additional stress and strain in ground arrays during seismic influences, that ultimately leads to residual yields and rolls of foundations of industrial and civil buildings. Essentially, residual displacements depend on the type and intensity of dynamic effects, as well as on the model foundation soils. At the same time, the most important factor is the compulsory registration of collaboration between the subgrade and the structure. Therefore, quantification of additional residual displacements of foundations of industrial buildings and structures under dynamic loads, is an actual problem of the modern earthquake-resistant construction.

TH-AB-BRA-08: Simulated Tumor Tracking in An MRI Linac for Lung Tumor Lesions Using the Monaco Treatment Planning System

Energy Technology Data Exchange (ETDEWEB)

Al-Ward, S; Kim, A; McCann, C; Ruschin, M; Cheung, P; Sahgal, A; Keller, B [Sunnybrook Health Sciences Centre, Toronto, Ontario (Canada)

2016-06-15

Purpose: To simulate tumor tracking in an Elekta MRI-linac (MRL) and to compare this tracking method with our current ITV approach in terms of OAR sparing for lung cancer patients. Methods: Five SABR-NSCLC patients with central lung tumors were selected for reasons of potential enhancement of tumor-tissue delineation using MRI. The Monaco TPS was used to compare the current clinical ITV approach to a simulated, novel tracking method which used a 7MV MRL beam in the presence of an orthogonal 1.5 T magnetic field (4D-MRL method). In the simulated tracking scenario, achieved using the virtual couch shift (VCS), the PTV was defined using an isotropic 5mm margin applied to the GTV of each phase, as acquired from an 8-phase amplitude-binned 4DCT. These VCS plans were optimized and weighted on each phase. The dose weighting was performed using the patient-specific breathing traces. The doses were accumulated on the inhale phase. The two methods were compared by assessing the OAR DVHs. Results: The 4D-MRL method resulted in a reduced target volume (by an average of 29% over all patients). The benefits of using an MRL tracking system depended on the tumor motion amplitude and the relative OAR motion (ROM) to the target. The reduction in mean doses to parallel organs was up to 3 Gy for the heart and 2.1 Gy for the lung. The reductions in maximum doses to serial organs were up to 9.4 Gy, 5.6 Gy, and 8.7 Gy for the esophagus, spinal cord, and the trachea, respectively. Serial organs benefited from MRL tracking when the ROM was ≥ 0.3 cm despite small tumor motion amplitude in some cases. Conclusions: This work demonstrated the potential benefit for an MRL tracking system to spare OARs in SABR-NSCLC patients with central tumors. The benefits are embodied in the target volume reduction. This project was made possible with the financial support of Elekta.

Bandgap tuning with thermal residual stresses induced in a quantum dot.

Science.gov (United States)

Kong, Eui-Hyun; Joo, Soo-Hyun; Park, Hyun-Jin; Song, Seungwoo; Chang, Yong-June; Kim, Hyoung Seop; Jang, Hyun Myung

2014-09-24

Lattice distortion induced by residual stresses can alter electronic and mechanical properties of materials significantly. Herein, a novel way of the bandgap tuning in a quantum dot (QD) by lattice distortion is presented using 4-nm-sized CdS QDs grown on a TiO2 particle as an application example. The bandgap tuning (from 2.74 eV to 2.49 eV) of a CdS QD is achieved by suitably adjusting the degree of lattice distortion in a QD via the tensile residual stresses which arise from the difference in thermal expansion coefficients between CdS and TiO2. The idea of bandgap tuning is then applied to QD-sensitized solar cells, achieving ≈60% increase in the power conversion efficiency by controlling the degree of thermal residual stress. Since the present methodology is not limited to a specific QD system, it will potentially pave a way to unexplored quantum effects in various QD-based applications. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Residual stress concerns in containment analysis

International Nuclear Information System (INIS)

Costantini, F.; Kulak, R. F.; Pfeiffer, P. A.

1997-01-01

The manufacturing of steel containment vessels starts with the forming of flat plates into curved plates. A steel containment structure is made by welding individual plates together to form the sections that make up the complex shaped vessels. The metal forming and welding process leaves residual stresses in the vessel walls. Generally, the effect of metal forming residual stresses can be reduced or virtually eliminated by thermally stress relieving the vesseL In large containment vessels this may not be practical and thus the residual stresses due to manufacturing may become important. The residual stresses could possibly tiect the response of the vessel to internal pressurization. When the level of residual stresses is significant it will affect the vessel's response, for instance the yielding pressure and possibly the failure pressure. The paper will address the effect of metal forming residual stresses on the response of a generic pressure vessel to internal pressurization. A scoping analysis investigated the effect of residual forming stresses on the response of an internally pressurized vessel. A simple model was developed to gain understanding of the mechanics of the problem. Residual stresses due to the welding process were not considered in this investigation

The Deep Ocean Sound Channel in Areas Around Australia,

Science.gov (United States)

1980-10-01

UNCLASSIFIED MRL-R-788 NLEEEEEE/llE/hm/l EIIEIIIEIIIII MRL-R-788 .0 -* AUSTRALIA LI, DEPARTMENT OF DEFENCE DEFENCE SCIENCE AND TECHNOLOGY ORGANISATION...cumbersome, even though they do give accurate results. An over-simplified but enlight - ening sound speed equation, extensively used by Northrup and Colburn [13

Characterization of Hospital Residuals

International Nuclear Information System (INIS)

Blanco Meza, A.; Bonilla Jimenez, S.

1997-01-01

The main objective of this investigation is the characterization of the solid residuals. A description of the handling of the liquid and gassy waste generated in hospitals is also given, identifying the source where they originate. To achieve the proposed objective the work was divided in three stages: The first one was the planning and the coordination with each hospital center, in this way, to determine the schedule of gathering of the waste can be possible. In the second stage a fieldwork was made; it consisted in gathering the quantitative and qualitative information of the general state of the handling of residuals. In the third and last stage, the information previously obtained was organized to express the results as the production rate per day by bed, generation of solid residuals for sampled services, type of solid residuals and density of the same ones. With the obtained results, approaches are settled down to either determine design parameters for final disposition whether for incineration, trituration, sanitary filler or recycling of some materials, and storage politics of the solid residuals that allow to determine the gathering frequency. The study concludes that it is necessary to improve the conditions of the residuals handling in some aspects, to provide the cleaning personnel of the equipment for gathering disposition and of security, minimum to carry out this work efficiently, and to maintain a control of all the dangerous waste, like sharp or polluted materials. In this way, an appreciable reduction is guaranteed in the impact on the atmosphere. (Author) [es

Applications of bauxite residue: A mini-review.

Science.gov (United States)

Verma, Ajay S; Suri, Narendra M; Kant, Suman

2017-10-01

Bauxite residue is the waste generated during alumina production by Bayer's process. The amount of bauxite residue (40-50 wt%) generated depends on the quality of bauxite ore used for the processing. High alkalinity and high caustic content in bauxite residue causes environmental risk for fertile soil and ground water contamination. The caustic (NaOH) content in bauxite residue leads to human health risks, like dermal problems and irritation to eyes. Moreover, disposal of bauxite residue requires a large area; such problems can only be minimised by utilising bauxite residue effectively. For two decades, bauxite residue has been used as a binder in cement industries and filler/reinforcement for composite materials in the automobile industry. Valuable metals and oxides, like alumina (Al 2 O 3 ), titanium oxide (TiO 2 ) and iron oxide Fe 2 O 3 , were extracted from bauxite residue to reduce waste. Bauxite residue was utilised in construction and structure industries to make geopolymers. It was also used in the making of glass-ceramics and a coating material. Recently bauxite residue has been utilised to extract rare earth elements like scandium (Sc), yttrium (Y), lanthanum (La), cerium (Ce), neodymium (Nd) and dysprosium (Dy). In this review article, the mineralogical characteristics of bauxite residue are summarised and current progresses on utilisation of bauxite residue in different fields of science and engineering are presented in detail.

Spallanzani's mouse: a model of restoration and regeneration.

Science.gov (United States)

Heber-Katz, E; Leferovich, J M; Bedelbaeva, K; Gourevitch, D

2004-01-01

The ability to regenerate is thought to be a lost phenotype in mammals, though there are certainly sporadic examples of mammalian regeneration. Our laboratory has identified a strain of mouse, the MRL mouse, which has a unique capacity to heal complex tissue in an epimorphic fashion, i.e., to restore a damaged limb or organ to its normal structure and function. Initial studies using through-and-through ear punches showed rapid full closure of the ear holes with cartilage growth, new hair follicles, and normal tissue architecture reminiscent of regeneration seen in amphibians as opposed to the scarring usually seen in mammals. Since the ear hole closure phenotype is a quantitative trait, this has been used to show-through extensive breeding and backcrossing--that the trait is heritable. Such analysis reveals that there is a complex genetic basis for this trait with multiple loci. One of the major phenotypes of the MRL mouse is a potent remodeling response with the absence or a reduced level of scarring. MRL healing is associated with the upregulation of the metalloproteinases MMP-2 and MMP-9 and the downregulation of their inhibitors TIMP-2 and TIMP-3, both present in inflammatory cells such as neutrophils and macrophages. This model has more recently been extended to the heart. In this case, a cryoinjury to the right ventricle leads to near complete scarless healing in the MRL mouse whereas scarring is seen in the control mouse. In the MRL heart, bromodeoxyuridine uptake by cardiomyocytes filling the wound site can be seen 60 days after injury. This does not occur in the control mouse. Function in the MRL heart, as measured by echocardiography, returns to normal.

Decrease of Pirimiphos-Methyl and Deltamethrin Residues in Stored Rice with Post-Harvest Treatment

Directory of Open Access Journals (Sweden)

Chuanshan Yu

2014-05-01

Full Text Available A modified quick, easy, cheap, effective, rugged (QuEChERS method with multi-walled carbon nanotubes (MWCNTs as reversed-dispersive solid phase extraction (r-DSPE material was applied to the analysis of pirimiphos-methyl and deltamethrin residues in stored rice. Two dustable powder (DP formulations (2% pirimiphos-methyl and deltamethrin DP; 5% pirimiphos-methyl DP were applied in simulated storehouse trials in the lab. The residues and dissipation of the two pesticides in stored rice were investigated. Slow dissipation of both pesticides was observed in stored rice. The half-lives of pirimiphos-methyl were 23.9–28.9 days, and those of deltamethrin were 23.9–24.8 days. Residues of pirimiphos-methyl from application rates of 4.5–6.75 a.i. mg/kg (active ingredient milligram per kilogram and 10–15 a.i. mg/kg were 1.6–3.8 mg/kg and 3.0–4.5 mg/kg at 60 days Pre-harvest Interval (PHI. Residues of deltamethrin from an application rate of 0.5–0.75 a.i. mg/kg were 0.13–0.14 mg/kg at 60 days PHI. Both pesticides residues were below the Maximum Residue Limits (MRLs established by the Codex Alimentarius Commission (CAC. Therefore, at the recommended dosages they are safe for use on stored rice.

Management of NORM Residues

International Nuclear Information System (INIS)

2013-06-01

The IAEA attaches great importance to the dissemination of information that can assist Member States in the development, implementation, maintenance and continuous improvement of systems, programmes and activities that support the nuclear fuel cycle and nuclear applications, and that address the legacy of past practices and accidents. However, radioactive residues are found not only in nuclear fuel cycle activities, but also in a range of other industrial activities, including: - Mining and milling of metalliferous and non-metallic ores; - Production of non-nuclear fuels, including coal, oil and gas; - Extraction and purification of water (e.g. in the generation of geothermal energy, as drinking and industrial process water; in paper and pulp manufacturing processes); - Production of industrial minerals, including phosphate, clay and building materials; - Use of radionuclides, such as thorium, for properties other than their radioactivity. Naturally occurring radioactive material (NORM) may lead to exposures at some stage of these processes and in the use or reuse of products, residues or wastes. Several IAEA publications address NORM issues with a special focus on some of the more relevant industrial operations. This publication attempts to provide guidance on managing residues arising from different NORM type industries, and on pertinent residue management strategies and technologies, to help Member States gain perspectives on the management of NORM residues

Immobilization of acid digestion residue

International Nuclear Information System (INIS)

Greenhalgh, W.O.; Allen, C.R.

1983-01-01

Acid digestion treatment of nuclear waste is similar to incineration processes and results in the bulk of the waste being reduced in volume and weight to some residual solids termed residue. The residue is composed of various dispersible solid materials and typically contains the resultant radioactivity from the waste. This report describes the immobilization of the residue in portland cement, borosilicate glass, and some other waste forms. Diagrams showing the cement and glass virtification parameters are included in the report as well as process steps and candidate waste product forms. Cement immobilization is simplest and probably least expensive; glass vitrification exhibits the best overall volume reduction ratio

On the extension of multi-phase models to sub-residual saturations

International Nuclear Information System (INIS)

Lingineni, S.; Chen, Y.T.; Boehm, R.F.

1995-01-01

This paper focuses on the limitations of applying multi-phase flow and transport models to simulate the hydrothermal processes occurring when the liquid saturation falls below residual levels. A typical scenario of a heat-generating high-level waste package emplaced in a backfilled drift of a waste repository is presented. The hydrothermal conditions in the vicinity of the waste package as well as in the far-field are determined using multi-phase, non-isothermal codes such as TOUGH2 and FEHM. As the waste package temperature increases, heat-pipe effects are created and water is driven away from the package into colder regions where it condenses. The variations in the liquid saturations close to the waste package are determined using these models with extended capillary pressure-saturations relationships to sub-residual regime. The predictions indicate even at elevated temperatures, waste package surroundings are not completely dry. However, if transport based modeling is used to represent liquid saturation variations in the sub-residual regime, then complete dry conditions are predicted within the backfill for extended periods of time. The relative humidity conditions near the waste package are also found to be sensitive to the representation of capillary pressure-saturation relationship used for sub-residual regime. An experimental investigation is carried out to study the variations in liquid saturations and relative humidity conditions in sub-residual regimes. Experimental results indicated that extended multi-phase models without interphase transport can not predict dry-out conditions and the simulations underpredict the humidity conditions near the waste package

Non-Destructive Measurement of Residual Strain in Connecting Rods Using Neutrons

Energy Technology Data Exchange (ETDEWEB)

Ikeda, Tomohiro [Honda R& D; Bunn, Jeffrey R. [ORNL; Fancher, Christopher M. [ORNL; Seid, Alan [Honda R& D; Motani, Ryuta [Honda R& D; Matsuda, Hideki [Honda R& D; Okayama, Tatsuya [Honda R& D

2018-04-01

Increasing the strength of materials is effective in reducing weight and boosting structural part performance, but there are cases in where the residual strain generated during the process of manufacturing of high-strength materials results in a decline of durability. It is therefore important to understand how the residual strain in a manufactured component changes due to processing conditions. In the case of a connecting rod, because the strain load on the connecting rod rib sections is high, it is necessary to clearly understand the distribution of strain in the ribs. However, because residual strain is generally measured by using X-ray diffractometers or strain gauges, measurements are limited to the surface layer of the parts. Neutron beams, however, have a higher penetration depth than X-rays, allowing for strain measurement in the bulk material. The research discussed within this paper consists of non-destructive residual strain measurements in the interior of connecting rods using the 2nd Generation Neutron Residual Stress Mapping Facility (NRSF2) at Oak Ridge National Laboratory, measuring the Fe (211) diffraction peak position of the ferrite phase. The interior strain distribution of connecting rod, which prepared under different manufacturing processes, was revealed. By the visualization of interior strains, clear understandings of differences in various processing conditions were obtained. In addition, it is known that the peak width, which is also obtained during measurement, is suggestive of the size of crystallites in the structure; however the peak width can additionally be caused by microstresses and material dislocations.

Determination of tylosin residues in pig tissues using high-performance liquid chromatography.

Science.gov (United States)

De Liguoro, M; Anfossi, P; Angeletti, R; Montesissa, C

1998-06-01

In accordance with the maximum residue limit of 100 micrograms kg-1 established by EU legislation, a simple and sensitive high-performance liquid chromatographic (HPLC) method was developed for the measurement of tylosin residues in pig tissues (fat, kidney, liver and muscle). Tylosin, a macrolide antibiotic, is extracted with water-methanol and cleaned-up by solid-phase extraction (SPE) on cation-exchange cartridges using methanol elution. Tylosin was determined by reversed-phase HPLC with UV detection at 280 nm and the mean recovery from pig tissues fortified in the range 50-200 micrograms kg-1 was 70-85%, with intra- and inter-day RSDs in the ranges 3.4-9.1 and 3.9-10.1% respectively.

Automatic detection of photoresist residual layer in lithography using a neural classification approach

KAUST Repository

Gereige, Issam

2012-09-01

Photolithography is a fundamental process in the semiconductor industry and it is considered as the key element towards extreme nanoscale integration. In this technique, a polymer photo sensitive mask with the desired patterns is created on the substrate to be etched. Roughly speaking, the areas to be etched are not covered with polymer. Thus, no residual layer should remain on these areas in order to insure an optimal transfer of the patterns on the substrate. In this paper, we propose a nondestructive method based on a classification approach achieved by artificial neural network for automatic residual layer detection from an ellipsometric signature. Only the case of regular defect, i.e. homogenous residual layer, will be considered. The limitation of the method will be discussed. Then, an experimental result on a 400 nm period grating manufactured with nanoimprint lithography is analyzed with our method. © 2012 Elsevier B.V. All rights reserved.

Determination of bromothalonil residues and degradation in apple and soil by QuEChERS and GC-MS/MS.

Science.gov (United States)

Liu, Huijun; Guo, Baoyuan; Wang, Huili; Li, Jianzhong; Zheng, Lin

2014-04-01

The dissipation and residues of bromothalonil in apple and soil under field condition were analyzed by QuEChERS (quick, easy, cheap, effective, rugged and safe) combined with gas chromatography-mass spectrometer method. The recoveries were ranged from 80.8 % to 106 % with coefficient variation for repeatability ranged from 3.08 % to 7.09 % at fortification levels of 0.02, 0.04 and 0.2 mg/kg in apple and soil. The limit of quantification of the method was 0.31 μg/kg. The dissipation rates of bromothalonil followed the first-order kinetics and the half-lives were from 3.61 to 3.98 days in apple and from 4.65 to 9.29 days in soil. In apple, the terminal residues of bromothalonil were below the China maximum residue limit (0.2 mg/kg) after 7 days of application. This work contributed to provide the basic information for a safe usage of bromothalonil in apple orchard and preventing health problem from consumers in China.

Water use practices limit the effectiveness of a temephos-based Aedes aegypti larval control program in Northern Argentina.

Directory of Open Access Journals (Sweden)

Fernando M Garelli

2011-03-01

Full Text Available A five-year citywide control program based on regular application of temephos significantly reduced Aedes aegypti larval indices but failed to maintain them below target levels in Clorinda, northern Argentina. Incomplete surveillance coverage and reduced residuality of temephos were held as the main putative causes limiting effectiveness of control actions.The duration of temephos residual effects in household-owned water-holding tanks (the most productive container type and main target for control was estimated prospectively in two trials. Temephos was applied using spoons or inside perforated small zip-lock bags. Water samples from the study tanks (including positive and negative controls were collected weekly and subjected to larval mortality bioassays. Water turnover was estimated quantitatively by adding sodium chloride to the study tanks and measuring its dilution 48 hs later.The median duration of residual effects of temephos applied using spoons (2.4 weeks was significantly lower than with zip-lock bags (3.4 weeks, and widely heterogeneous between tanks. Generalized estimating equations models showed that bioassay larval mortality was strongly affected by water type and type of temephos application depending on water type. Water type and water turnover were highly significantly associated. Tanks filled with piped water had high turnover rates and short-lasting residual effects, whereas tanks filled with rain water showed the opposite pattern. On average, larval infestations reappeared nine weeks post-treatment and seven weeks after estimated loss of residuality.Temephos residuality in the field was much shorter and more variable than expected. The main factor limiting temephos residuality was fast water turnover, caused by householders' practice of refilling tanks overnight to counteract the intermittence of the local water supply. Limited field residuality of temephos accounts in part for the inability of the larval control program to

Residual stress characterization of steel TIG welds by neutron diffraction and by residual magnetic stray field mappings

Science.gov (United States)

Stegemann, Robert; Cabeza, Sandra; Lyamkin, Viktor; Bruno, Giovanni; Pittner, Andreas; Wimpory, Robert; Boin, Mirko; Kreutzbruck, Marc

2017-03-01

The residual stress distribution of tungsten inert gas welded S235JRC+C plates was determined by means of neutron diffraction (ND). Large longitudinal residual stresses with maxima around 600 MPa were found. With these results as reference, the evaluation of residual stress with high spatial resolution GMR (giant magneto resistance) sensors was discussed. The experiments performed indicate a correlation between changes in residual stresses (ND) and the normal component of local residual magnetic stray fields (GMR). Spatial variations in the magnetic field strength perpendicular to the welds are in the order of the magnetic field of the earth.

Radioactive material in residues of health services residues

International Nuclear Information System (INIS)

Costa R, A. Jr.; Recio, J.C.

2006-01-01

The work presents the operational actions developed by the one organ responsible regulator for the control of the material use radioactive in Brazil. Starting from the appearance of coming radioactive material of hospitals and clinical with services of nuclear medicine, material that that is picked up and transported in specific trucks for the gathering of residuals of hospital origin, and guided one it manufactures of treatment of residuals of services of health, where they suffer radiological monitoring before to guide them for final deposition in sanitary embankment, in the city of Sao Paulo, Brazil. The appearance of this radioactive material exposes a possible one violation of the norms that govern the procedures and practices in that sector in the country. (Author)

Residues and Analysis of Degradation of Novel Fungicide Picoxystrobin in Cucumber and Soil Under Field Conditions

Directory of Open Access Journals (Sweden)

SUN Yang

2014-10-01

Full Text Available The analytical method for the residues of picoxystrobin in cucumber vegetable and soil matrices was developed and the dissipation of picoxystrobin under field conditions was studied. The limit of detection(LODof picoxystrobin was 3.5×10 -11 g and the limit of quantifica-tion(LOQwas found to be 0.005 mg·kg -1 in cucumber and soil. At three different spiking levels(0.005, 0.05, 0.25 mg·kg -1, mean recoveries and relative standard deviation(RSDfrom fortified samples in five replicated experiments for each matrix were in the range of 68.61%-122.4% and 1.06%-17.2%, respectively. The results showed that the half-lives of picoxystrobin in cucumber and soil from Tianjin City were 5.71 d and 12.9 d, respectively, the half-lives of picoxystrobin in cucumber and soil from Shandong Province were 2.70 d and 10.3 d, respec-tively, and the half-lives of picoxystrobin in cucumber and soil from Jiangsu Province were 9.76 d and 14.9 d, respectively. The maximum residual concentration of picoxystrobin on the 5th day after the last application was 0.014 mg· kg -1, much lower than the Maximum Residue Limits(MRLsfor picoxystrobin in cucumber according to the standards of EU(0.05 mg·kg-1.

Improved crop residue cover estimates by coupling spectral indices for residue and moisture

Science.gov (United States)

Remote sensing assessment of soil residue cover (fR) and tillage intensity will improve our predictions of the impact of agricultural practices and promote sustainable management. Spectral indices for estimating fR are sensitive to soil and residue water content, therefore, the uncertainty of estima...

Liquid paraffin as new dilution medium for the analysis of high boiling point residual solvents with static headspace-gas chromatography.

Science.gov (United States)

D'Autry, Ward; Zheng, Chao; Bugalama, John; Wolfs, Kris; Hoogmartens, Jos; Adams, Erwin; Wang, Bochu; Van Schepdael, Ann

2011-07-15

Residual solvents are volatile organic compounds which can be present in pharmaceutical substances. A generic static headspace-gas chromatography analysis method for the identification and control of residual solvents is described in the European Pharmacopoeia. Although this method is proved to be suitable for the majority of samples and residual solvents, the method may lack sensitivity for high boiling point residual solvents such as N,N-dimethylformamide, N,N-dimethylacetamide, dimethyl sulfoxide and benzyl alcohol. In this study, liquid paraffin was investigated as new dilution medium for the analysis of these residual solvents. The headspace-gas chromatography method was developed and optimized taking the official Pharmacopoeia method as a starting point. The optimized method was validated according to ICH criteria. It was found that the detection limits were below 1μg/vial for each compound, indicating a drastically increased sensitivity compared to the Pharmacopoeia method, which failed to detect the compounds at their respective limit concentrations. Linearity was evaluated based on the R(2) values, which were above 0.997 for all compounds, and inspection of residual plots. Instrument and method precision were examined by calculating the relative standard deviations (RSD) of repeated analyses within the linearity and accuracy experiments, respectively. It was found that all RSD values were below 10%. Accuracy was checked by a recovery experiment at three different levels. Mean recovery values were all in the range 95-105%. Finally, the optimized method was applied to residual DMSO analysis in four different Kollicoat(®) sample batches. Copyright © 2011 Elsevier B.V. All rights reserved.

Prediction of Detailed Enzyme Functions and Identification of Specificity Determining Residues by Random Forests

Science.gov (United States)

Nagao, Chioko; Nagano, Nozomi; Mizuguchi, Kenji

2014-01-01

Determining enzyme functions is essential for a thorough understanding of cellular processes. Although many prediction methods have been developed, it remains a significant challenge to predict enzyme functions at the fourth-digit level of the Enzyme Commission numbers. Functional specificity of enzymes often changes drastically by mutations of a small number of residues and therefore, information about these critical residues can potentially help discriminate detailed functions. However, because these residues must be identified by mutagenesis experiments, the available information is limited, and the lack of experimentally verified specificity determining residues (SDRs) has hindered the development of detailed function prediction methods and computational identification of SDRs. Here we present a novel method for predicting enzyme functions by random forests, EFPrf, along with a set of putative SDRs, the random forests derived SDRs (rf-SDRs). EFPrf consists of a set of binary predictors for enzymes in each CATH superfamily and the rf-SDRs are the residue positions corresponding to the most highly contributing attributes obtained from each predictor. EFPrf showed a precision of 0.98 and a recall of 0.89 in a cross-validated benchmark assessment. The rf-SDRs included many residues, whose importance for specificity had been validated experimentally. The analysis of the rf-SDRs revealed both a general tendency that functionally diverged superfamilies tend to include more active site residues in their rf-SDRs than in less diverged superfamilies, and superfamily-specific conservation patterns of each functional residue. EFPrf and the rf-SDRs will be an effective tool for annotating enzyme functions and for understanding how enzyme functions have diverged within each superfamily. PMID:24416252

Quantitative determination and sampling of azathioprine residues for cleaning validation in production area.

Science.gov (United States)

Fazio, Tatiana Tatit; Singh, Anil Kumar; Kedor-Hackmann, Erika Rosa Maria; Santoro, Maria Inês Rocha Miritello

2007-03-12

Cleaning validation is an integral part of current good manufacturing practices in any pharmaceutical industry. Nowadays, azathioprine and several other pharmacologically potent pharmaceuticals are manufactured in same production area. Carefully designed cleaning validation and its evaluation can ensure that residues of azathioprine will not carry over and cross contaminate the subsequent product. The aim of this study was to validate simple analytical method for verification of residual azathioprine in equipments used in the production area and to confirm efficiency of cleaning procedure. The HPLC method was validated on a LC system using Nova-Pak C18 (3.9 mm x 150 mm, 4 microm) and methanol-water-acetic acid (20:80:1, v/v/v) as mobile phase at a flow rate of 1.0 mL min(-1). UV detection was made at 280 nm. The calibration curve was linear over a concentration range from 2.0 to 22.0 microg mL(-1) with a correlation coefficient of 0.9998. The detection limit (DL) and quantitation limit (QL) were 0.09 and 0.29 microg mL(-1), respectively. The intra-day and inter-day precision expressed as relative standard deviation (R.S.D.) were below 2.0%. The mean recovery of method was 99.19%. The mean extraction-recovery from manufacturing equipments was 83.5%. The developed UV spectrophotometric method could only be used as limit method to qualify or reject cleaning procedure in production area. Nevertheless, the simplicity of spectrophotometric method makes it useful for routine analysis of azathioprine residues on cleaned surface and as an alternative to proposed HPLC method.

Statistical inference on residual life

CERN Document Server

Jeong, Jong-Hyeon

2014-01-01

This is a monograph on the concept of residual life, which is an alternative summary measure of time-to-event data, or survival data. The mean residual life has been used for many years under the name of life expectancy, so it is a natural concept for summarizing survival or reliability data. It is also more interpretable than the popular hazard function, especially for communications between patients and physicians regarding the efficacy of a new drug in the medical field. This book reviews existing statistical methods to infer the residual life distribution. The review and comparison includes existing inference methods for mean and median, or quantile, residual life analysis through medical data examples. The concept of the residual life is also extended to competing risks analysis. The targeted audience includes biostatisticians, graduate students, and PhD (bio)statisticians. Knowledge in survival analysis at an introductory graduate level is advisable prior to reading this book.

On the ASR and ASR thermal residues characterization of full scale treatment plant.

Science.gov (United States)

Mancini, G; Viotti, P; Luciano, A; Fino, D

2014-02-01

In order to obtain 85% recycling, several procedures on Automotive Shredder Residue (ASR) could be implemented, such as advanced metal and polymer recovery, mechanical recycling, pyrolysis, the direct use of ASR in the cement industry, and/or the direct use of ASR as a secondary raw material. However, many of these recovery options appear to be limited, due to the possible low acceptability of ASR based products on the market. The recovery of bottom ash and slag after an ASR thermal treatment is an option that is not usually considered in most countries (e.g. Italy) due to the excessive amount of contaminants, especially metals. The purpose of this paper is to provide information on the characteristics of ASR and its full-scale incineration residues. Experiments have been carried out, in two different experimental campaigns, in a full-scale tyre incineration plant specifically modified to treat ASR waste. Detailed analysis of ASR samples and combustion residues were carried out and compared with literature data. On the basis of the analytical results, the slag and bottom ash from the combustion process have been classified as non-hazardous wastes, according to the EU waste acceptance criteria (WAC), and therefore after further tests could be used in future in the construction industry. It has also been concluded that ASR bottom ash (EWC - European Waste Catalogue - code 19 01 12) could be landfilled in SNRHW (stabilized non-reactive hazardous waste) cells or used as raw material for road construction, with or without further treatment for the removal of heavy metals. In the case of fly ash from boiler or Air Pollution Control (APC) residues, it has been found that the Cd, Pb and Zn concentrations exceeded regulatory leaching test limits therefore their removal, or a stabilization process, would be essential prior to landfilling the use of these residues as construction material. Copyright © 2013 Elsevier Ltd. All rights reserved.

Obtention of ceramic pigments with residue from electroplating; Obtencao de pigmentos ceramicos a partir de residuo de galvanoplastia

Energy Technology Data Exchange (ETDEWEB)

Boss, A. [Servico Nacional de Aprendizagem Industrial (SENAI), Tijucas, SC (Brazil); Kniess, C.T. [Universidade Nove de Julho (UNINOVE), SP (Brazil); Aguiar, B.M. de [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Prates, P.B.; Milanez, K., E-mail: kniesscl@gmail.com [Universidade Federal de Santa Catarina (EMC/UFSC), SC (Brazil). Depto de Engenharia Mecanica

2011-07-01

The incorporation of industrial residues in industrial processes opens up new business opportunities and reduces the volume of extraction of raw materials, preserving natural resources, which are limited. An important residue is the mud from galvanic industry, consisting of alkali and transition metals. According to NBR 10004/2004, this residue can be classified as Class I (hazardous), depending on the concentration of metals present in the mud. This paper proposes a method for reusing the residue from electroplating in ceramic pigments. The characterization of residual plating was obtained by chemical analysis, mineralogical analysis and pH measurements. The electroplating waste was incorporated in different percentages on a standard pigment formula of industrial ceramic, consisting mainly of Zn, Fe and Cr. The obtained pigments were applied in ceramic glazes to colorimetric and visual analysis, which showed good results with the addition of up to 15% of industrial waste. (author)

Residual determination and risk assessment of buprofezin in plum (Prunus domestica) grown in open-field conditions following the application of three different formulations.

Science.gov (United States)

Kabir, Md Humayun; Abd El-Aty, A M; Kim, Sung-Woo; Lee, Han Sol; Rahman, Md Musfiqur; Lee, Young-Jun; Chung, Hyung Suk; Lieu, Truong; Choi, Jeong-Heui; Shin, Ho-Chul; Im, Geon-Jae; Hong, Su Myeong; Shim, Jae-Han

2016-11-01

This study was conducted to characterize the residual level and perform a risk assessment on buprofezin formulated as an emulsifiable concentrate, wettable powder, and suspension concentrate over various treatment schedules in plum (Prunus domestica). The samples were extracted with an AOAC quick, easy, cheap, effective, rugged, and safe, 'QuEChERS', method after major modifications. As intrinsic interferences were observed in blank plum samples following dispersive-solid phase extraction (consisting of primary secondary amine and C 18 sorbents), amino cartridges were used for solid-phase extraction. Analysis was carried out using liquid chromatography with diode array detection and confirmed by liquid chromatography-tandem mass spectrometry. The method showed excellent linearity with determination coefficient (R 2  = 1) and satisfactory recoveries (at two spiking levels, 0.5 and 2.5 mg/kg) between 90.98 and 94.74% with relative standard deviation (RSD) ≤8%. The limit of quantification (0.05 mg/kg) was considerably lower than the maximum residue limit (2 mg/kg) set by the Codex Alimentarius. Absolute residue levels for emulsifiable concentrates were highest, perhaps owing to the dilution rate and adjuvant. Notably, all formulation residues were lower than the maximum residue limit, and safety data proved that the fruits are safe for consumers. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Improving protein fold recognition by extracting fold-specific features from predicted residue-residue contacts.

Science.gov (United States)

Zhu, Jianwei; Zhang, Haicang; Li, Shuai Cheng; Wang, Chao; Kong, Lupeng; Sun, Shiwei; Zheng, Wei-Mou; Bu, Dongbo

2017-12-01

Accurate recognition of protein fold types is a key step for template-based prediction of protein structures. The existing approaches to fold recognition mainly exploit the features derived from alignments of query protein against templates. These approaches have been shown to be successful for fold recognition at family level, but usually failed at superfamily/fold levels. To overcome this limitation, one of the key points is to explore more structurally informative features of proteins. Although residue-residue contacts carry abundant structural information, how to thoroughly exploit these information for fold recognition still remains a challenge. In this study, we present an approach (called DeepFR) to improve fold recognition at superfamily/fold levels. The basic idea of our approach is to extract fold-specific features from predicted residue-residue contacts of proteins using deep convolutional neural network (DCNN) technique. Based on these fold-specific features, we calculated similarity between query protein and templates, and then assigned query protein with fold type of the most similar template. DCNN has showed excellent performance in image feature extraction and image recognition; the rational underlying the application of DCNN for fold recognition is that contact likelihood maps are essentially analogy to images, as they both display compositional hierarchy. Experimental results on the LINDAHL dataset suggest that even using the extracted fold-specific features alone, our approach achieved success rate comparable to the state-of-the-art approaches. When further combining these features with traditional alignment-related features, the success rate of our approach increased to 92.3%, 82.5% and 78.8% at family, superfamily and fold levels, respectively, which is about 18% higher than the state-of-the-art approach at fold level, 6% higher at superfamily level and 1% higher at family level. An independent assessment on SCOP_TEST dataset showed consistent

Measurement of residual solvents in a drug substance by a purge-and-trap method.

Science.gov (United States)

Lakatos, Miklós

2008-08-05

The purge-and-trap (P&T) gas extraction method combined with gas chromatography was studied for its suitability for quantitative residual solvents determination in a water-soluble active pharmaceutical ingredient (API). Some analytical method performance characteristics were investigated, namely, the repeatability, the accuracy and the detection limit of determination. The results show that the P&T technique is--as expected--more sensitive than the static headspace, thus it can be used for the determination of residual solvents pertaining to the ICH Class 1 group. It was found that it could be an alternative sample preparation method besides the static headspace (HS) method.

Development of Residual Gas Profile Monitors at GSI

International Nuclear Information System (INIS)

Giacomini, T.; Forck, P.; Barabin, S.; Liakin, D.; Skachkov, V.

2004-01-01

Beam profile measurements at modern ion synchrotrons and storage rings require high timing performances on a turn-by-turn basis. High spatial resolutions are essential for cold beams and beamwidth measurings. The currently used RGM supported very interesting measurements and applications. Due to the readout technology the spatial and time resolution is limited. To meet the expanded demands a more comprehensive device is under development. It will be an all-purpose residual gas monitor to cover the wide range of beam currents and transversal particle distributions. Due to the fast profile detection it will operate on primary electrons after residual gas ionization. A magnetic field of 100 mT binds them to the ionization point inside 0.1-mm orbits. The high-resolution mode will be read out by a digital CCD camera with an upstream MCP-phosphor screen assembly. It is planned to read out the fast turn-by-turn mode by an array of 100 photodiodes with a resolution of 1 mm. Every photodiode is equipped with an amplifier-digitizer device providing a frame rate of ∼ 10 MSamples/s

Development of Residual Gas Profile Monitors at GSI

Science.gov (United States)

Giacomini, T.; Barabin, S.; Forck, P.; Liakin, D.; Skachkov, V.

2004-11-01

Beam profile measurements at modern ion synchrotrons and storage rings require high timing performances on a turn-by-turn basis. High spatial resolutions are essential for cold beams and beamwidth measurings. The currently used RGM supported very interesting measurements and applications. Due to the readout technology the spatial and time resolution is limited. To meet the expanded demands a more comprehensive device is under development. It will be an all-purpose residual gas monitor to cover the wide range of beam currents and transversal particle distributions. Due to the fast profile detection it will operate on primary electrons after residual gas ionization. A magnetic field of 100 mT binds them to the ionization point inside 0.1-mm orbits. The high-resolution mode will be read out by a digital CCD camera with an upstream MCP-phosphor screen assembly. It is planned to read out the fast turn-by-turn mode by an array of 100 photodiodes with a resolution of 1 mm. Every photodiode is equipped with an amplifier-digitizer device providing a frame rate of ˜ 10 MSamples/s.

Assessment of agroforestry residue potentials for the bioeconomy in the European Union.

Science.gov (United States)

Thorenz, Andrea; Wietschel, Lars; Stindt, Dennis; Tuma, Axel

2018-03-01

The biobased chemical industry is characterised by strong growth. Innovative products and materials such as biopolymers have been developed, and current European demand for biopolymers exceeds the domestic supply. Agroforestry residues can serve as main sources of the basic building blocks for chemicals and materials. This work assesses sustainably available agroforestry residues to feed a high added-value materials and product bioeconomy. To evaluate bioeconomic potential, a structured three-step approach is applied. Cultivation practices, sustainability issues, legislative restrictions, technical limitations and competitive applications are considered. All data regarding bioeconomic potential are processed on a regional level and mapped by ArcGIS. Our results identify wheat straw as the most promising source in the agricultural sector, followed by maize stover, barley straw and rape straw, which all contain a total concentration of lignocellulose of more than 80% of dry matter. In the forestry sector, residue bark from two coniferous species, spruce and pine, is the most promising source, with approximately 70% lignocellulose. Additionally, coniferous bark contains considerable amounts of tannin, which has attracted increasing interest for industrial utilisation. A sensitivity analysis concerning removal rates, residue-to-crop ratios, changes in farming technologies and competing applications is applied at the end of the study to consolidate our results.

Development of irradiation technique on controlling food contamination residue

International Nuclear Information System (INIS)

Liu Bin; Xiong Shanbai; Xiong Guangquan; Cheng Wei; Chen Yuxia; Liao Tao; Li Xin; Lin Ruotai

2010-01-01

The current state of the researches of irradiation technology on controlling food mycotoxin, pesticide, veterinary drugs and fishery drugs residue was summarized. And the degradation rate, mechanism, products and toxicities of food contamination were expatiated. The free radical from irradiation attack the site of weaker bond, and the less or more toxic substances were produced, which lead to the degradation of the food contamination. The limitations and future application of irradiation technique on controlling food contamination were also analyzed. (authors)

Determination of veterinary antibiotic residues in foods of animal origin by liquid chromatography

Directory of Open Access Journals (Sweden)

Pedro Enrique La Rosa Zambrano

2018-05-01

Full Text Available TITLE: Determination of veterinary antibiotic residues in foods of animal origin by liquid chromatography Introduction: The presence of certain infectious agents makes necessary the use of antibiotics to ensure the welfare of animals destined for human consumption; however, the withdrawal time must be considered and respected since there is the possibility of finding residues above the permitted levels, which could constitute a risk to public health. Objective: Present a collection of information based on how is performed the detection and quantification of antibiotic residues in various products of animal origin using chromatography methods. Method: Review of databases in Elsevier, SciELO, Springer, Hindawi, FAO, EFSA, Senasa and Sanipes, using keywords such as “liquid chromatography”, “mass spectrometry”, “antibiotic residues” and “products of animal origin” in Spanish and English. Results: They were selected 71 references among articles, book chapters, norms and regulations published between 2000 and 2017, which it is emphasized that chromatographic methodologies for antibiotic residues monitoring must be sensitive, reproducible, reliable and identify volumes in mg/kg; likewise, they must follow the requirements of international standards for the maximum residue limits detecction. Conclusions: Liquid chromatography coupled to a mass spectrometer is the most used technique to allow the separation of complex matrices based on the molecular weight of the compound (antibiotic or its fragments; however, It is complex, expensive and requires highly trained personnel.

Evaluation of the effectiveness of olive cake residue as an expansive soil stabilizer

Science.gov (United States)

Nalbantoglu, Zalihe; Tawfiq, Salma

2006-08-01

The quantity of the by-product olive cake residue generated in most parts of the Mediterranean countries continues to increase and expected to double in amount within 10 15 years. This increase intensifies the problems associated with the disposal of this by-product. Olive cake residue has a potential for use as a soil stabilizer and large volumes can be beneficially used. This study is directed toward determining if olive cake residue can be utilized to increase the strength and stability of expansive soils which constitute a costly natural hazard to lightweight structures on shallow foundations. A series of laboratory tests using engineering properties, such as Atterberg limits, moisture-density relationship (compaction), swell, unconfined compressive strength were undertaken to evaluate the effectiveness and performance of the olive cake residue as a soil stabilizer. Test results indicate that an addition of only 3% burned olive waste into the soil causes a reduction in plasticity, volume change and an increase in the unconfined compressive strength. However, it was observed that the presence of burned olive waste in the soil greater than 3% caused an increase in the compressibility and a decrease in the unconfined compressive strength. Test results indicate that the use of olive waste in soil stabilization gives greater benefits to the environment than simply disposing of the by-product, olive cake residue.

The formation of a native-like structure containing eight conserved hydrophobic residues is rate limiting in two-state protein folding of ACBP

DEFF Research Database (Denmark)

Kragelund, Birthe Brandt; Osmark, Peter; Neergaard, Thomas B.

1999-01-01

The acyl-coenzyme A-binding proteins (ACBPs) contain 26 highly conserved sequence positions. The majority of these have been mutated in the bovine protein, and their influence on the rate of two-state folding and unfolding has been measured. The results identify eight sequence positions, out of 24...... probed, that are critical for fast productive folding. The residues are all hydrophobic and located in the interface between the N- and C-terminal helices. The results suggest that one specific site dominated by conserved hydrophobic residues forms the structure of the productive rate-determining folding...... step and that a sequential framework model can describe the protein folding reaction....

Residual Structures in Latent Growth Curve Modeling

Science.gov (United States)

Grimm, Kevin J.; Widaman, Keith F.

2010-01-01

Several alternatives are available for specifying the residual structure in latent growth curve modeling. Two specifications involve uncorrelated residuals and represent the most commonly used residual structures. The first, building on repeated measures analysis of variance and common specifications in multilevel models, forces residual variances…

Download this PDF file

African Journals Online (AJOL)

Proff.Adewunmi

Abstract. Objective: This study investigated the effects of Chinese herbal medicine and prednisone on CD4+FoxP3+ T cells (Tregs) and Th17 cells in the. MRL/lpr mouse model of systemic lupus erythematosus. Methods: MRL/lpr mice were treated with herbal medicine (yin-nourishing and heat-clearing therapy), prednisone, ...

Computing Decoupled Residuals for Compact Disc Players

DEFF Research Database (Denmark)

Odgaard, Peter Fogh; Stoustrup, Jakob; Andersen, Palle

2006-01-01

a pair of residuals generated by Compact Disc Player. However, these residuals depend on the performance of position servos in the Compact Disc Player. In other publications of the same authors a pair of decoupled residuals is derived. However, the computation of these alternative residuals has been...

Characterisation and management of concrete grinding residuals.

Science.gov (United States)

Kluge, Matt; Gupta, Nautasha; Watts, Ben; Chadik, Paul A; Ferraro, Christopher; Townsend, Timothy G

2018-02-01

Concrete grinding residue is the waste product resulting from the grinding, cutting, and resurfacing of concrete pavement. Potential beneficial applications for concrete grinding residue include use as a soil amendment and as a construction material, including as an additive to Portland cement concrete. Concrete grinding residue exhibits a high pH, and though not hazardous, it is sufficiently elevated that precautions need to be taken around aquatic ecosystems. Best management practices and state regulations focus on reducing the impact on such aquatic environment. Heavy metals are present in concrete grinding residue, but concentrations are of the same magnitude as typically recycled concrete residuals. The chemical composition of concrete grinding residue makes it a useful product for some soil amendment purposes at appropriate land application rates. The presence of unreacted concrete in concrete grinding residue was examined for potential use as partial replacement of cement in new concrete. Testing of Florida concrete grinding residue revealed no dramatic reactivity or improvement in mortar strength.

Mining utilization of residues of exhaust gas cleaning from waste incinerators; Bergtechnische Verwertung von Abgasreinigungsrueckstaenden aus Verbrennungsanlagen

Energy Technology Data Exchange (ETDEWEB)

Werthmann, Rainer [K+S Entsorgung GmbH, Kassel (Germany). Abfallchemie und Zulassungen

2013-03-01

The exhaust gas purification of a household incinerator or a substitute fuel power plant intends to remove dust, heavy metal compounds and acid harmful gases from the exhaust gas in order to comply with the immission-control legal limits. The particulate matter contains volatile heavy metal chlorides which precipitate as a solid matter. The enhanced amount of water-soluble salts is conspicuous. The concentration of soluble components is limited to 10,000 mg/L in the 1:10 eluate due to the landfill regulation. Thus, the residues of exhaust gas cleaning are predestined for an underground waste disposal in salt mines. Under this aspect, the author of the contribution under consideration reports on the mining utilization of residues of exhaust gas cleaning from waste incinerators.

Residual symptoms and functioning in depression, does the type of residual symptom matter? A post-hoc analysis

Directory of Open Access Journals (Sweden)

Romera Irene

2013-02-01

Full Text Available Abstract Background The degrees to which residual symptoms in major depressive disorder (MDD adversely affect patient functioning is not known. This post-hoc analysis explored the association between different residual symptoms and patient functioning. Methods Patients with MDD who responded (≥50% on the 17-item Hamilton Rating Scale for Depression; HAMD-17 after 3 months of treatment (624/930 were included. Residual core mood-symptoms (HAMD-17 core symptom subscale ≥1, residual insomnia-symptoms (HAMD-17 sleep subscale ≥1, residual anxiety-symptoms (HAMD-17-anxiety subscale ≥1, residual somatic-symptoms (HAMD-17 Item 13 ≥1, pain (Visual Analogue Scale ≥30, and functioning were assessed after 3 months treatment. A stepwise logistic regression model with normal functioning (Social and Occupational Functioning Assessment Scale ≥80 as the dependent variable was used. Results After 3 months, 59.5% of patients (371/624 achieved normal functioning and 66.0% (412/624 were in remission. Residual symptom prevalence was: core mood symptoms 72%; insomnia 63%; anxiety 78%; and somatic symptoms 41%. Pain reported in 18%. Factors associated with normal functioning were absence of core mood symptoms (odds ratio [OR] 8.7; 95% confidence interval [CI], 4.6–16.7, absence of insomnia symptoms (OR 1.8; 95% CI, 1.2–2.7, episode length (4–24 weeks vs. ≥24 weeks [OR 2.0; 95% CI, 1.1–3.6] and better baseline functioning (OR 1.0; 95% CI, 1.0–1.1. A significant interaction between residual anxiety symptoms and pain was found (p = 0.0080. Conclusions Different residual symptoms are associated to different degrees with patient functioning. To achieve normal functioning, specific residual symptoms domains might be targeted for treatment.

Nitrogen availability of biogas residues

Energy Technology Data Exchange (ETDEWEB)

El-Sayed Fouda, Sara

2011-09-07

The objectives of this study were to characterize biogas residues either unseparated or separated into a liquid and a solid phase from the fermentation of different substrates with respect to their N and C content. In addition, short and long term effects of the application of these biogas residues on the N availability and N utilization by ryegrass was investigated. It is concluded that unseparated or liquid separated biogas residues provide N at least corresponding to their ammonium content and that after the first fertilizer application the C{sub org}:N{sub org} ratio of the biogas residues was a crucial factor for the N availability. After long term application, the organic N accumulated in the soil leads to an increased release of N.

DETERMINATION OF CHLORPYRIFOS IN APPLE FROM THE RESEN REGION

Directory of Open Access Journals (Sweden)

Vezirka JANKULOSKA

2017-03-01

Full Text Available The aim of this research is to determine the presence of chlorpyrifos in two varieties of apples: Golden Delicious and Idared in two different locations (Evla and Krveni from the Resen region in the country. Chlorpyrifos is organophosphate pesticide (insecticide used to protect apples from insects which can cause significant damage in apple production. The apples are analyzed in four development phases and in each phase the presence of chlorpyrifos is determined. Chlorpiryfos analysis of the apples is performed by liquid chromatography-tandem mass spectrometry (LC-MS/MS followed by an extraction/separation cleansing with acetonitrile and the dispersive SPE - QuEChERS - method. The results are compared with the maximum residue levels (MRL prescribed by the legislation of the Republic of Macedonia. The conclusion is that chlorpyrifos is variously represented in most phases, regardless of the phase and location where the apple is grown. At certain phase the concentration exceedes MRL, however during the harvest, apples are safe to be consumed. Higher presence of chlorpyrifos is found in Idared apples at Kriveni location as compared to Evla. Тhe presence of chlorpyrifos in Golden Delicious is almost equal in both locations. From the statistical analysis of the data it is noticeable that the use of chlorpyrifos does not depend on the (type variety of apple but rather on the location where the apple is grown.

Management of solid residues in waste-to-energy and biomass systems

Energy Technology Data Exchange (ETDEWEB)

Vehlow, J.; Bergfeldt, B. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Technische Chemie; Wilen, C.; Ranta, J. [VTT Technical Research Centre of Finland, Espoo (Finland); Schwaiger, H. [Forschungsgesellschaft Joanneum mbH, Graz (Austria); Visser, H.J.M. [ECN Energy Research Centre of the Netherlands, Petten (Netherlands); Gu, S.; Gyftopoulou, E.; Brammer, J. [Aston Univ., Birmingham (United Kingdom)

2007-12-15

residues from pyrolysis or carbonisation of biomass. A high potential of application of such charcoal is theoretically possible but the ecological compatibility of some of the proposed scenarios has not yet been shown. An open question is also the potential of such residues for the recovery of ingredients with fertiliser capabilities like potassium of phosphorous. Limited sound information, too, was found for residues from anaerobic digestion of agricultural and other biomass and organic waste fractions. There are two main issues concerning their environmental compatibility: the potential pollution in case materials originated from waste is treated respectively co-treated and the inventory of nutrients in case 'clean' biomass from the agricultural sector only was used. A final conclusion can be drawn that there is need for further research on long-term reliable management strategies, especially for all types of residues from gas cleaning in all processes.

Residual stresses around Vickers indents

International Nuclear Information System (INIS)

Pajares, A.; Guiberteau, F.; Steinbrech, R.W.

1995-01-01

The residual stresses generated by Vickers indentation in brittle materials and their changes due to annealing and surface removal were studied in 4 mol% yttria partially stabilized zirconia (4Y-PSZ). Three experimental methods to gain information about the residual stress field were applied: (i) crack profile measurements based on serial sectioning, (ii) controlled crack propagation in post indentation bending tests and (iii) double indentation tests with smaller secondary indents located around a larger primary impression. Three zones of different residual stress behavior are deduced from the experiments. Beneath the impression a crack free spherical zone of high hydrostatic stresses exists. This core zone is followed by a transition regime where indentation cracks develop but still experience hydrostatic stresses. Finally, in an outward third zone, the crack contour is entirely governed by the tensile residual stress intensity (elastically deformed region). Annealing and surface removal reduce this crack driving stress intensity. The specific changes of the residual stresses due to the post indentation treatments are described and discussed in detail for the three zones

Minimization of zirconium chlorinator residues

International Nuclear Information System (INIS)

Green, G.K.; Harbuck, D.D.

1995-01-01

Zirconium chlorinator residues contain an array of rare earths, scandium, unreacted coke, and radioactive thorium and radium. Because of the radioactivity, the residues must be disposed in special waste containment facilities. As these sites become more congested, and with stricter environmental regulations, disposal of large volumes of wastes may become more difficult. To reduce the mass of disposed material, the US Bureau of Mines (USBM) developed technology to recover rare earths, thorium and radium, and unreacted coke from these residues. This technology employs an HCl leach to solubilize over 99% of the scandium and thorium, and over 90% of the rare earths. The leach liquor is processed through several solvent extraction stages to selectively recover scandium, thorium, and rare earths. The leach residue is further leached with an organic acid to solubilize radium, thus allowing unreacted coke to be recycled to the chlorinator. The thorium and radium waste products, which comprise only 2.1% of the original residue mass, can then be sent to the radioactive waste facility

Validation of Analysis Method of pesticides in fresh tomatoes by Gas Chromatography associated to a liquid scintillation counting

International Nuclear Information System (INIS)

Dhib, Ahlem

2011-01-01

Pesticides are nowadays considered as toxic for human health. The maximum residues levels (MRL) in foodstuff are more and more strict. Therefore, selective analytical techniques are necessary for their identification and their quantification. The aim of this study is to set up a multi residue method for the determination of pesticides in tomatoes by gas chromatography with μECD detector (GC/μECD) associated to liquid scintillation counting. A global analytical protocol consisting of a QuECHERS version of the extraction step followed by purification step of the resulting extract on a polymeric sorbent was set up. The 14 C-chloropyrifos used as an internal standard proved excellent to control the different steps needed for the sample preparation. The method optimized is specific, selective with a recovery averaged more than 70 pour cent, repetitive and reproducible. Although some others criteria need to be checked regarding validation before its use in routine analysis, the potential of the method has been demonstrated.

9 CFR 311.39 - Biological residues.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Biological residues. 311.39 Section... Biological residues. Carcasses, organs, or other parts of carcasses of livestock shall be condemned if it is determined that they are adulterated because of the presence of any biological residues. ...

Effect of processing on the disappearance of pesticide residues in fresh-cut lettuce: Bioavailability and dietary risk.

Science.gov (United States)

Camara, Miguel A; Barba, Alberto; Cermeño, Sandra; Martinez, Gracia; Oliva, Jose

2017-12-02

The aim of this research is to establish the processing factors of six pesticides durong the preparation of fresh-cut lettuce and to assess the risk of ingestion of pesticide residues associated with the consumption of the same. A field study was carried out on the dissipation of three insecticides (imidacloprid, tebufenozide, cypermethrin) and three fungicides (metalaxyl, tebuconazole, azoxystrobin) during treatment conditions simulating those used for commercial fresh-cut lettuce. A simultaneous residue analysis method is validated using QuEChERS extraction with acetonitrile and CG-MS and LC-MS/MS analysis. The residues detected after field application never exceed the established Maximum Residue Limits. The processing factors were generally less than 1 (between 0.34 for tebufenozide and 0.53 for imidacloprid), indicating that the process, as a whole, considerably reduces residue levels in processed lettuce compared to fresh lettuce. It is confirmed that cutting, followed by washing and drying, considerably reduces the residues. A matrix effect in the dialyzation of the pesticides is observed and the in vitro study of bioavailability establishes a low percentage of stomach absorption capacity (lettuce showed no concerns for consumer health.

Radiation exposure of the population by residual substances from nuclear power plants

International Nuclear Information System (INIS)

Neider, R.

1985-01-01

This contribution gives a survey of common practice in the Federal Republic of Germany with model studies carried out so far to derive limit values. In this context, the SSK recommendations for 'Possibilities and Limits of Collective Doses' is applied to this specific problem and compared with the ideas of the ICRP. Questions on the 'cut-off dose' and on the 'de minimis' concept are discussed. Finally, a suggestion is developed and substantiated for the uniform determination of limit values for non-harmful utilization of low-level radioactive residual substances. The radiation exposure taken as 'de minimis' for individual persons out of a general public is taken as a basic. (orig./HP) [de

Neutron diffraction measurements of residual stress in additively manufactured stainless steel

International Nuclear Information System (INIS)

Brown, D.W.; Bernardin, J.D.; Carpenter, J.S.; Clausen, B.; Spernjak, D.; Thompson, J.M.

2016-01-01

Charpy test specimens were additively manufactured (AM) on a single stainless steel plate from a 17–4 class stainless steel using a powder-bed, laser melting technique on an EOS M280 direct metal laser sintering (DMLS) machine. Cross-hatched mesh support structures for the Charpy test specimens were varied in strut width and density to parametrically study their influence on the build stability and accuracy as the DMLS process has been known to generate parts with large amounts of residual stress. Neutron diffraction was used to profile the residual stresses in several of the AM samples before and after the samples were removed from the support structure for the purpose of determining residual stresses. The residual stresses were found to depend very little on the properties of the support structure over the limited range studied here. The largest stress component was in the long direction of each of the samples studied and was roughly 2/3 of the yield stress of the material. The stress field was altered considerably when the specimen was removed from the support structure. It was noted in this study that a single Charpy specimen developed a significant tear between the growth plate and support structure. The presence of the tear in the support structure strongly affected the observed stress field: the asymmetric tear resulted in a significantly asymmetric stress field that propagated through removal of the sample from the base plate. The altered final residual stress state of the sample as well as its observed final shape indicates that the tear initiated during the build and developed without disrupting the fabrication process, suggesting a need for in-situ monitoring.

Residue levels and risk assessment of pesticides in nuts of China.

Science.gov (United States)

Liu, Yihua; Shen, Danyu; Li, Shiliang; Ni, Zhanglin; Ding, Ming; Ye, Caifen; Tang, Fubin

2016-02-01

The pesticide residue levels of three nuts (chestnut, walnut, pinenut) collected from seven main producing areas of China were investigated. Twenty-nine pesticides, including organophosphates (OPs), organochlorines (OCs), pyrethroids (PYs) and two fungicides (triadimefon and buprofezin) were analyzed by gas chromatography (GC). Four OPs (acephate, dimethoate, chlorpyrifos and parathion-methyl) were found in 11.4% samples, with the concentrations of 19.0 µg kg(-1) to 74.0 µg kg(-1). Six OCs (DDT, HCH, endosulfan, quintozene, aldrin and dieldrin) were found in 18.2% samples, with the concentrations of 2.0 µg kg(-1) to 65.7 µg kg(-1). Among OCs, p,p-DDE and α-HCH were the dominant isomer for DDT and HCH. Five PYs (fenpropathrin, fenvalerate, cypermethrin, bifenthrin and cyhalothrin) were found in 15.9% samples, with the concentrations of 2.5 µg kg(-1) to 433.0 µg kg(-1). Fenpropathrin was the most frequently detected pesticide. In addition, triadimefon and buprofezin were detected only in two samples. For the tested nuts, 25.0% samples with multiple residues (containing more than two pesticides) were noted, even up to 9.1% samples with five pesticide residues. The residue of 15.9% samples was higher than the maximum residue limits (MRLs) of China. The short-term risks for the tested nuts were below 1.2%, and the highest long-term risk was 12.58%. The cumulative risk (cHI) for the tested pesticides were 8.43% (OPs), 0.42% (OCs), 12.82% (PYs) and 0.15% (fungicides), respectively. The total cHI was 21.82%. There was no significant health risk for consumers via nuts consumption. Copyright © 2015 Elsevier Ltd. All rights reserved.

Neutron diffraction measurements of residual stress in additively manufactured stainless steel

Energy Technology Data Exchange (ETDEWEB)

Brown, D.W.; Bernardin, J.D.; Carpenter, J.S.; Clausen, B.; Spernjak, D.; Thompson, J.M.

2016-12-15

Charpy test specimens were additively manufactured (AM) on a single stainless steel plate from a 17–4 class stainless steel using a powder-bed, laser melting technique on an EOS M280 direct metal laser sintering (DMLS) machine. Cross-hatched mesh support structures for the Charpy test specimens were varied in strut width and density to parametrically study their influence on the build stability and accuracy as the DMLS process has been known to generate parts with large amounts of residual stress. Neutron diffraction was used to profile the residual stresses in several of the AM samples before and after the samples were removed from the support structure for the purpose of determining residual stresses. The residual stresses were found to depend very little on the properties of the support structure over the limited range studied here. The largest stress component was in the long direction of each of the samples studied and was roughly 2/3 of the yield stress of the material. The stress field was altered considerably when the specimen was removed from the support structure. It was noted in this study that a single Charpy specimen developed a significant tear between the growth plate and support structure. The presence of the tear in the support structure strongly affected the observed stress field: the asymmetric tear resulted in a significantly asymmetric stress field that propagated through removal of the sample from the base plate. The altered final residual stress state of the sample as well as its observed final shape indicates that the tear initiated during the build and developed without disrupting the fabrication process, suggesting a need for in-situ monitoring.

3D reconstruction of the structure of a residual limb for customising the design of a prosthetic socket.

Science.gov (United States)

Shuxian, Zheng; Wanhua, Zhao; Bingheng, Lu

2005-01-01

Aiming at overcoming the limitations of the plaster-casting method in traditional prosthetic socket fabrication, the idea of reconstructing the 3D models for bones and skin of the residual limb is proposed. Given the two-dimensional obtained image through CT scanning, using image processing and reverse engineering techniques, the 3D solid model of the residual limb can be successfully reconstructed. The new approach can reproduce both the internal and the external structure of the residual limb. It can moreover avoid making a positive mould by the way of manual modifications. In addition to this, it can provide a scientific basis for the individualization of prosthetic socket design.

Chinese herbal medicine and prednisone increase proportion of ...

African Journals Online (AJOL)

Objective: This study investigated the effects of Chinese herbal medicine and prednisone onCD4+FoxP3+ T cells (Tregs) and Th17 cells in the MRL/lpr mouse model of systemic lupus erythematosus. Methods: MRL/lpr mice were treated with herbal medicine (yin-nourishing and heat-clearing therapy), prednisone, and a ...

Residual-stress measurements

Energy Technology Data Exchange (ETDEWEB)

Ezeilo, A N; Webster, G A [Imperial College, London (United Kingdom); Webster, P J [Salford Univ. (United Kingdom)

1997-04-01

Because neutrons can penetrate distances of up to 50 mm in most engineering materials, this makes them unique for establishing residual-stress distributions non-destructively. D1A is particularly suited for through-surface measurements as it does not suffer from instrumental surface aberrations commonly found on multidetector instruments, while D20 is best for fast internal-strain scanning. Two examples for residual-stress measurements in a shot-peened material, and in a weld are presented to demonstrate the attractive features of both instruments. (author).

Bioprinting: an assessment based on manufacturing readiness levels.

Science.gov (United States)

Wu, Changsheng; Wang, Ben; Zhang, Chuck; Wysk, Richard A; Chen, Yi-Wen

2017-05-01

Over the last decade, bioprinting has emerged as a promising technology in the fields of tissue engineering and regenerative medicine. With recent advances in additive manufacturing, bioprinting is poised to provide patient-specific therapies and new approaches for tissue and organ studies, drug discoveries and even food manufacturing. Manufacturing Readiness Level (MRL) is a method that has been applied to assess manufacturing maturity and to identify risks and gaps in technology-manufacturing transitions. Technology Readiness Level (TRL) is used to evaluate the maturity of a technology. This paper reviews recent advances in bioprinting following the MRL scheme and addresses corresponding MRL levels of engineering challenges and gaps associated with the translation of bioprinting from lab-bench experiments to ultimate full-scale manufacturing of tissues and organs. According to our step-by-step TRL and MRL assessment, after years of rigorous investigation by the biotechnology community, bioprinting is on the cusp of entering the translational phase where laboratory research practices can be scaled up into manufacturing products specifically designed for individual patients.

Residues from waste incineration. Final report

Energy Technology Data Exchange (ETDEWEB)

Astrup, T.; Juul Pedersen, A.; Hyks, J.; Frandsen, F.J.

2009-08-15

The overall objective of the project was to improve the understanding of the formation and characteristics of residues from waste incineration. This was done focusing on the importance of the waste input and the operational conditions of the furnace. Data and results obtained from the project have been discussed in this report according to the following three overall parts: i) mass flows and element distribution, ii) flue gas/particle partitioning and corrosion/deposition aspects, and iii) residue leaching. This has been done with the intent of structuring the discussion while tacitly acknowledging that these aspects are interrelated and cannot be separated. Overall, it was found that the waste input composition had significant impact of the characteristics of the generated residues. A similar correlation between operational conditions and residue characteristics could not be observed. Consequently, the project recommend that optimization of residue quality should focus on controlling the waste input composition. The project results showed that including specific waste materials (and thereby also excluding the same materials) may have significant effects on the residue composition, residue leaching, aerosol and deposit formation.It is specifically recommended to minimize Cl in the input waste. Based on the project results, it was found that a significant potential for optimization of waste incineration exist. (author)

Harvest time residues of pendimethalin and oxyfluorfen in vegetables and soil in sugarcane-based intercropping systems.

Science.gov (United States)

Kaur, Navneet; Bhullar, Makhan S

2015-05-01

Terminal residues of pendimethalin and oxyfluorfen applied in autumn sugarcane- and vegetables-based intercropping systems were analyzed in peas (Pisum sativum), cabbage (Brassica oleracea), garlic (Allium sativum), gobhi sarson (Brassica napus), and raya (Brassica juncea). The study was conducted in winter season in 2010-2011 and in 2011-2012 at Ludhiana, India. Pendimethalin at 0.56 kg and 0.75 kg ha(-1) was applied immediately after sowing of gobhi sarson, raya, peas, garlic, and 2 days before transplanting of cabbage seedlings. Oxyfluorfen at 0.17 kg and 0.23 kg ha(-1) was applied immediately after sowing of peas and garlic and 2 days before transplanting of cabbage seedlings intercropped in autumn sugarcane. Representative samples of these vegetables were collected at 75, 90, 100, and 165 days after application of herbicides and analyzed by high-performance liquid chromatograph (HPLC) with diode array detector for residues. The residue level of pendimethalin and oxyfluorfen in mature vegetables was found to be below the limit of quantification which is 0.05 mg kg(-1) for both the herbicides. The soil samples were collected at 0, 7, 15, 30, 45, and 60 days after the application of their herbicides. The residues of herbicides in soil samples were found to be below the detectability limit of 0.05 mg kg(-1) after 60 days in case of pendimethalin and after 45 days in case of oxyfluorfen.

Livestock sector in Zambia: Opportunities and limitations

International Nuclear Information System (INIS)

Daka, D.E.

2002-01-01

Zambia is endowed with a vast feed resource base for animal production purposes. However, the feed resource base is not fully utilised and this is manifested by low livestock productivity. The quality and production levels of animal products depend largely on the quality and quantity of feed, which is fed to the livestock. Among the constraints limiting livestock productivity in Zambia, insufficient and low quality of veld grass, particularly during the long dry season (March-November) is responsible for low production levels and poor reproductive performance in ruminants. The problem of inadequate veld grass can be overcome by feeding crop residues which are in abundance during the dry season. Zambia produces large quantities of sugarcane tops, bagasse and straws from maize, sorghum, wheat, millet and rice. These could sustain livestock productivity if supplemented with protein sources or treated with urea. Despite the production of large quantities of crop residues, these are wasted by burning or get destroyed by termites. There is a need, therefore, to develop feeding systems based on crop residues which are compatible with the farming systems in Zambia and to promote such feeding systems. (author)

FAO/IAEA model protocol for the determination of bound residues in soil

International Nuclear Information System (INIS)

1986-01-01

A protocol for determining bound pesticide residue content in soils was developed and collaboratively tested by 11 members of the FAO/IAEA Research Co-ordination Committee. The method assumes prior incubation of soil with a radioactive pesticide or related organic compound. The major process steps of the protocol include: (a) Soxhlet extraction of air-dry soil with methanol for 24 h; (b) determination of radioactivity in unextracted soil, in methanol-extracted soil (yielding bound residue content), and in the methanol extract (yielding extractable residue content); and (c) use of triplicate samples per analysis. The participants received lysimeter soils treated six to seven years earlier with 14 C-allyl alcohol (Soil A) or 14 C-hexachloro-benzene (Soil H). The inter-laboratory results first indicated non-homogeneity of Soil A sub-samples, since the initial and bound radioactivity for four laboratories was about half of that found by the remaining seven laboratories. Intra-laboratory (in one laboratory) analyses of sub-subsamples from six 'high-group' laboratories, two 'low-group' laboratories and two additional laboratories confirmed the homogeneity of Soil A and implicated error in the combustion methods at 'low-group' laboratories. The intra- and inter-laboratory coefficients of variation for initial 14 C-content were 4.7% and 7.0%, respectively. Of the residual 14 C in Soil A, 95% was bound; in contrast, only 15% of 14 C in Soil H was bound. The coefficients of variation among ten laboratories, for Soil H, were 8.4% and 18.1% for percentage extractable residue and percentage bound residue, respectively. Some limited testing of alternative protocols, using other solvents or batch extraction, confirmed that the IAEA protocol was most efficient in the extraction of non-bound radioactivity; pre-wetting Soil A may, however, improve extraction. (author)

Zeranol: a review of the metabolism, toxicology, and analytical methods for detection of tissue residues

International Nuclear Information System (INIS)

Baldwin, R.S.; Williams, R.D.; Terry, M.K.

1983-01-01

Zeranol, an anabolic agent produced commercially for use in cattle and sheep intended for human consumption, is noncarcinogenic, nonteratogenic, and nonmutagenic. Toxicity testing (acute, subacute, and chronic) in several species by various routes of administration reveals an extremely low toxicity, the oral rat LD 50 exceeding 40 g/kg. Postmortem abnormalities of high-dose animals are attributed to the effects of the compound on the endocrine system. Both zeranol itself and zearalanone, the major Phase I metabolite in the seven species studied, are excreted in the feces and in the urine, either free or as sulfates/glucuronides. A minor urinary metabolite has been identified as taleranol, an epimer of zeranol. Both metabolites exhibit a very low order of toxicity (oral rat LD 50 exceeding 10 g/kg in both cases), and both exhibit less biological activity than the parent compound. The four types of analytical methods which have been employed for the specific detection and quantitation of residues of zeranol in edible tissues are: (1) gas chromatography (detection limit . 20 ppb), (2) high-performance liquid chromatography (detection limit . 5 ppb), (3) thin-layer chromatography (detection limit . 1-3 ppb), and (4) radioimmunoassay methods (detection limit to be published). The following residue levels were determined radiometrically in tissue samples taken 45 days after implantation of cattle with 36 mg tritiated zeranol: less than or equal to 2 ppb in liver, less than or equal to 1 ppb in kidney and fat, and less than or equal to 0.2 ppb in muscle and plasma. A no-effect level (NEL) of 0.225 mg/kg was determined as the highest oral dosage of zeranol which produced no estrogenic effects in female monkeys. Based on the NEL, a tolerance level for tissue residues of zeranol was calculated as 315 ppb

Determination and depletion of residues of carbadox, tylosin, and virginiamycin in kidney, liver, and muscle of pigs in feeding experiments.

Science.gov (United States)

Lauridsen, M G; Lund, C; Jacobsen, M

1988-01-01

The results of residue determinations of the growth promotors carbadox, tylosin, and virginiamycin in kidney, liver, and muscle from pigs in feeding experiments are described as well as the analytical methods used. Residues of the carbadox metabolite quinoxaline-2-carboxylic acid were found in liver from pigs fed 20 mg/kg in the diet with a withdrawal time of 30 days. No residues were detected in muscle with zero withdrawal time. The limit of determination was 0.01 mg/kg for both tissues. No residues of virginiamycin and tylosin were found in pigs fed 50 and 40 mg/kg, respectively, in the diet, even with zero withdrawal time. Residues of tylosin of 0.06 mg/kg and below were detected in liver and kidney from pigs fed 200 or 400 mg/kg and slaughtered within 3 h after the last feeding.

Ensemble Kalman filtering with residual nudging

KAUST Repository

Luo, X.

2012-10-03

Covariance inflation and localisation are two important techniques that are used to improve the performance of the ensemble Kalman filter (EnKF) by (in effect) adjusting the sample covariances of the estimates in the state space. In this work, an additional auxiliary technique, called residual nudging, is proposed to monitor and, if necessary, adjust the residual norms of state estimates in the observation space. In an EnKF with residual nudging, if the residual norm of an analysis is larger than a pre-specified value, then the analysis is replaced by a new one whose residual norm is no larger than a pre-specified value. Otherwise, the analysis is considered as a reasonable estimate and no change is made. A rule for choosing the pre-specified value is suggested. Based on this rule, the corresponding new state estimates are explicitly derived in case of linear observations. Numerical experiments in the 40-dimensional Lorenz 96 model show that introducing residual nudging to an EnKF may improve its accuracy and/or enhance its stability against filter divergence, especially in the small ensemble scenario.

In-house method validation and occurrence of alpha-, beta-endosulfan, endosulfan sulphate, lambda-cyhalothrin, procymidone and trifluralin residues in strawberry

Directory of Open Access Journals (Sweden)

Alexandre Augusto Soares

2013-12-01

Full Text Available A method for determination of organohalogen pesticides in strawberry by gas chromatography with electron capture detection was validated and applied in a monitoring program. Linearity, matrix effects, and day effect were evaluated for the analytes alpha-endosulfan, beta-endosulfan, endosulfan sulphate, lambda-cyhalothrin, procymidone, and trifluralin. The linear range varied according to the chromatographic response of the analyte. Significant matrix effects were observed. The mean recoveries ranged from 74.6 to 115.4%, with repeatability standard deviations between 1.6 and 21.0% and intermediate precision between 5.9 and 21.0%. Detection, quantification and decision limit, and detection capacity ranged from 0.003 to 0.007 mg/kg, 0.005 to 0.013 mg/kg; 0.003 to 3.128 mg/kg; and 0.005 to 3.266 mg/kg, respectively. The method was fit for the purpose of monitoring organohalogen residues in strawberries. Residues of these pesticides were detected in 124 of the 186 samples analyzed between 2009 and 2011 in the state of Minas Gerais. Nine of them did not comply with the current legislation requirements; among them, seven (3.8% had residues of unauthorized pesticide for the culture of strawberry, one (0.5% had residues above the maximum residue limit, and another one (0.5% exhibited both non-conformities.

Dynamics, Residue and Risk Assessment of Nitenpyram in Rice and Paddy Field

Directory of Open Access Journals (Sweden)

YUAN Xue-xia

2016-09-01

Full Text Available Residues dynamics, final residual levels and dietary intake risk of nitenpyram in rice and paddy field were investigated in three dif-ferent regions of China(Shandong, Henan and Anhui. A method was illustrated to detect nitenpyram residues in paddy, plant, brown rice, paddy water and soil. The residues in paddy and rice were extracted with methanol+phosphate buffer(0.2 mol·L-1, pH=7.0(60+40, adjust pH to 2.5, then cleaned up with solid phase extraction column and 0.22 μm filter membrane, and then analyzed by HPLC with an ul-traviolet detector at 260 nm. When spiked 0.05, 0.5, 1.0 mg·kg-1, the recoveries of nitenpyram in paddy plant and brown rice were 78.4%~94.7% and 84.0%~94.2%, respectively. The residues in paddy water and soil were extracted with phosphate buffer (0.2 mol·L-1, pH=7.0, when spiked 0.01, 0.5, 1.0 mg·kg-1, the recoveries of nitenpyram in paddy water and soil were 84.6%~98.0% and 93.7%~97.1%, respective-ly, which indicated this method match the requirement of the detection. Two years results showed that nitenpyram belongs to easily degraded pesticides, because all half-lives were below 1.4 d in rice plant, as well as below 4.2 d in paddy water. Final residual levels of nitenpyram in rice were all below 0.05 mg·kg-1,which was far below the Japanese maximum residue limit(0.5 mg·kg-1. The risk quotients (RQs were low for different populations in China, which indicated its low risk in rice. Therefore, the rice with nitenpyram applied, according to the recom-mend method, 45 g·hm-2 application once, with 21 days collection interval, was safe.

Role of Fas and Treg Cells in Fracture Healing as Characterized in the Fas-Deficient (lpr) Mouse Model of Lupus†

Science.gov (United States)

Al-Sebaei, Maisa O; Daukss, Dana M; Belkina, Anna C; Kakar, Sanjeev; Wigner, Nathan A; Cusher, Daniel; Graves, Dana; Einhorn, Thomas; Morgan, Elise; Gerstenfeld, Louis C

2014-01-01

Previous studies showed that loss of tumor necrosis factor α (TNFα) signaling delayed fracture healing by delaying chondrocyte apoptosis and cartilage resorption. Mechanistic studies showed that TNFα induced Fas expression within chondrocytes; however, the degree to which chondrocyte apoptosis is mediated by TNFα alone or dependent on the induction of Fas is unclear. This question was addressed by assessing fracture healing in Fas-deficient B6.MRL/Faslpr/J mice. Loss of Fas delayed cartilage resorption but also lowered bone fraction in the calluses. The reduced bone fraction was related to elevated rates of coupled bone turnover in the B6.MRL/Faslpr/J calluses, as evidenced by higher osteoclast numbers and increased osteogenesis. Analysis of the apoptotic marker caspase 3 showed fewer positive chondrocytes and osteoclasts in calluses of B6.MRL/Faslpr/J mice. To determine if an active autoimmune state contributed to increased bone turnover, the levels of activated T cells and Treg cells were assessed. B6.MRL/Faslpr/J mice had elevated Treg cells in both spleens and bones of B6.MRL/Faslpr/J but decreased percentage of activated T cells in bone tissues. Fracture led to ∼30% to 60% systemic increase in Treg cells in both wild-type and B6.MRL/Faslpr/J bone tissues during the period of cartilage formation and resorption but either decreased (wild type) or left unchanged (B6.MRL/Faslpr/J) the numbers of activated T cells in bone. These results show that an active autoimmune state is inhibited during the period of cartilage resorption and suggest that iTreg cells play a functional role in this process. These data show that loss of Fas activity specifically in chondrocytes prolonged the life span of chondrocytes and that Fas synergized with TNFα signaling to mediate chondrocyte apoptosis. Conversely, loss of Fas systemically led to increased osteoclast numbers during later periods of fracture healing and increased osteogenesis. These findings suggest that retention

Role of Fas and Treg cells in fracture healing as characterized in the fas-deficient (lpr) mouse model of lupus.

Science.gov (United States)

Al-Sebaei, Maisa O; Daukss, Dana M; Belkina, Anna C; Kakar, Sanjeev; Wigner, Nathan A; Cusher, Daniel; Graves, Dana; Einhorn, Thomas; Morgan, Elise; Gerstenfeld, Louis C

2014-06-01

Previous studies showed that loss of tumor necrosis factor α (TNFα) signaling delayed fracture healing by delaying chondrocyte apoptosis and cartilage resorption. Mechanistic studies showed that TNFα induced Fas expression within chondrocytes; however, the degree to which chondrocyte apoptosis is mediated by TNFα alone or dependent on the induction of Fas is unclear. This question was addressed by assessing fracture healing in Fas-deficient B6.MRL/Fas(lpr) /J mice. Loss of Fas delayed cartilage resorption but also lowered bone fraction in the calluses. The reduced bone fraction was related to elevated rates of coupled bone turnover in the B6.MRL/Fas(lpr) /J calluses, as evidenced by higher osteoclast numbers and increased osteogenesis. Analysis of the apoptotic marker caspase 3 showed fewer positive chondrocytes and osteoclasts in calluses of B6.MRL/Fas(lpr) /J mice. To determine if an active autoimmune state contributed to increased bone turnover, the levels of activated T cells and Treg cells were assessed. B6.MRL/Fas(lpr) /J mice had elevated Treg cells in both spleens and bones of B6.MRL/Fas(lpr) /J but decreased percentage of activated T cells in bone tissues. Fracture led to ∼30% to 60% systemic increase in Treg cells in both wild-type and B6.MRL/Fas(lpr) /J bone tissues during the period of cartilage formation and resorption but either decreased (wild type) or left unchanged (B6.MRL/Fas(lpr) /J) the numbers of activated T cells in bone. These results show that an active autoimmune state is inhibited during the period of cartilage resorption and suggest that iTreg cells play a functional role in this process. These data show that loss of Fas activity specifically in chondrocytes prolonged the life span of chondrocytes and that Fas synergized with TNFα signaling to mediate chondrocyte apoptosis. Conversely, loss of Fas systemically led to increased osteoclast numbers during later periods of fracture healing and increased osteogenesis. These findings

Alternatives to crop residues for soil amendment

OpenAIRE

Powell, J.M.; Unger, P.W.

1997-01-01

Metadata only record In semiarid agroecosystems, crop residues can provide important benefits of soil and water conservation, nutrient cycling, and improved subsequent crop yields. However, there are frequently multiple competing uses for residues, including animal forage, fuel, and construction material. This chapter discusses the various uses of crop residues and examines alternative soil amendments when crop residues cannot be left on the soil.

77 FR 24671 - Compliance Guide for Residue Prevention and Agency Testing Policy for Residues

Science.gov (United States)

2012-04-25

... Hazard Analysis and Critical Control Points (HACCP) inspection system, another important component of the NRP is to provide verification of residue control in HACCP systems. As part of the HACCP regulation... guide, and FSIS finds violative residues, the establishment's HACCP system may be inadequate under 9 CFR...

Determination of critical levels of residual oxygen to minimize discoloration of sliced packaged Norwegian salami under light display.

Science.gov (United States)

Sørheim, Oddvin; Måge, Ingrid; Larsen, Hanne

2017-07-01

Discoloration of sliced packaged salami is contributing to rejection of the product, food waste and economical loss. A combination of residual O 2 in the headspace of packages and light is causing photooxidation and deterioration of colour. The aim of this study was to establish maximum tolerable concentrations of residual O 2 in packages of salami slices with 100% N 2 under light display at 4 and 20°C. Salami sausages had variable inherent O 2 consumption rate. Storage of salami in 1% O 2 in darkness did not induce discoloration. The upper limits for O 2 for avoiding discoloration under light were variable in the range 0.1-1.0%, depending on temperature and type of salami. Display at 20°C increased the rate of O 2 depletion compared to 4°C. To minimize discoloration, sliced and packaged salami should be stored in darkness at approximately 20°C until the level of residual O 2 is reduced below a critical limit. Copyright © 2017 Elsevier Ltd. All rights reserved.

Dynamic behaviour and residual pattern of thiamethoxam and its metabolite clothianidin in Swiss chard using liquid chromatography-tandem mass spectrometry.

Science.gov (United States)

Rahman, Md Musfiqur; Farha, Waziha; Abd El-Aty, A M; Kabir, Md Humayun; Im, So Jeong; Jung, Da-I; Choi, Jeong-Heui; Kim, Sung-Woo; Son, Young Wook; Kwon, Chan-Hyeok; Shin, Ho-Chul; Shim, Jae-Han

2015-05-01

A simultaneous method was developed to analyse thiamethoxam and its metabolite clothianidin in Swiss chard using tandem mass spectrometry (in the positive electrospray ionisation mode using multiple reaction monitoring mode) to estimate the dissipation pattern and the pre-harvest residue limit (PHRL). Thiamethoxam (10%, WG) was sprayed on Swiss chard grown in two different areas under greenhouse conditions at the recommended dose rate of 10 g/20 L water. Samples were collected randomly up to 14 days post-application, extracted using quick, easy, cheap, effective, rugged, safe (QuEChERS) acetate-buffered method and purified via a dispersive solid phase extraction (d-SPE) procedure. Matrix matched calibration showed good linearity with determination coefficients (R(2)) ⩾ 0.998. The limits of detection (LOD) and quantification (LOQ) were 0.007 and 0.02 mg/kg. The method was validated in triplicate at two different spiked concentration levels. Good recoveries (n=3) of 87.48-105.61% with relative standard deviations (RSDs) < 10 were obtained for both analytes. The rate of disappearance of total thiamethoxam residues in/on Swiss chard was best described by first-order kinetics with half-lives of 6.3 and 4.2 days. We predicted from the PHRL curves that if the residues were <19.21 or 26.98 mg/kg at 10 days before harvest, then total thiamethoxam concentrations would be below the maximum residue limits during harvest. Copyright © 2014 Elsevier Ltd. All rights reserved.

Dissipation and residue of clothianidin in granules and pesticide fertilizers used in cabbage and soil under field conditions.

Science.gov (United States)

Zhang, P W; Wang, S Y; Huang, C L; Fu, J T; Huang, R L; Li, Z H; Zhang, Z X

2018-01-01

The single application of 0.5 % clothianidin granules, a novel formulation, was used to control pests in vegetables under a high dose. In this article, residues of clothianidin in cabbage and soil samples under field conditions from Guangzhou, Nanning, and Qianjiang were determined by HPLC. The terminal residues of clothianidin in cabbage were less than the limit of detection (clothianidin residual, clothianidin granules and fertilizers of chicken manure, urea, and organic fertilizer were mixed into different pesticide fertilizers through their normal field using dosage and evaluate residual influence of clothianidin in different formula. After analysis of variance of the effect factors, the effect of different pesticide types on half-life was not significant, but the effect of sample types was significant. Clothianidin granules and pesticide fertilizers could be safely applied in cabbage under a single high-dose administration.

Method for the analysis of triadimefon and ethofumesate from dislodgeable foliar residues on turfgrass by solid-phase extraction and in-vial elution.

Science.gov (United States)

Runes, H B; Jenkins, J J; Field, J A

1999-08-01

Triadimefon, a fungicide, and ethofumesate, an herbicide, are commonly applied to turfgrass in the Pacific Northwest, resulting in foliar residues. A simple and rapid method was developed to determine triadimefon and ethofumesate concentrations from dislodgeable foliar residues on turfgrass. Turfgrass samples were washed, and wash water containing surfactant (a 0.126% solution) was collected for residue analysis. This analytical method utilizes a 25 mm C(8) Empore disk and in-vial elution to quantitatively determine triadimefon and ethofumesate in 170 mL aqueous samples. The analytes were eluted by placing the disk in a 2 mL autosampler vial with 980 microL of ethyl acetate and 20 microL of 2-chlorolepidine, the internal standard, for analysis by GC/MS. The method quantitation limits are 0.29 microg/L for ethofumesate and 0.59 microg/L for triadimefon. The method detection limits are 0.047 microg/L and 0.29 microg/L for ethofumesate and triadimefon, respectively. Concentrations of triadimefon and ethofumesate from dislodgeable foliar residues from a field study are reported.

Simple detection of residual enrofloxacin in meat products using microparticles and biochips.

Science.gov (United States)

Ha, Mi-Sun; Chung, Myung-Sub; Bae, Dong-Ho

2016-05-01

A simple and sensitive method for detecting enrofloxacin, a major veterinary fluoroquinolone, was developed. Monoclonal antibody specific for enrofloxacin was immobilised on a chip and fluorescent dye-labelled microparticles were covalently bound to the enrofloxacin molecules. Enrofloxacin in solution competes with the microparticle-immobilised enrofloxacin (enroMPs) to bind to the antibody on the chip. The presence of enrofloxacin was verified by detecting the fluorescence of enrofloxacin-bound microparticles. Under optimum conditions, a high dynamic range was achieved at enrofloxacin concentrations ranging from 1 to 1000 μg kg(-1). The limits of detection and quantification for standard solutions were 5 and 20 μg kg(-1) respectively, which are markedly lower than the maximum residue limit. Using simple extraction methods, recoveries from fortified beef, pork and chicken samples were 43.4-62.3%. This novel method also enabled approximate quantification of enrofloxacin concentration: the enroMP signal intensity decreased with increasing enrofloxacin concentration. Because of its sensitivity, specificity, simplicity and rapidity, the method described herein will facilitate the detection and approximate quantification of enrofloxacin residues in foods in a high-throughput manner.

Formation of non-extractable pesticide residues: observations on compound differences, measurement and regulatory issues

Energy Technology Data Exchange (ETDEWEB)

Mordaunt, Catriona J.; Gevao, Bondi; Jones, Kevin C.; Semple, Kirk T

2005-01-01

Six major use pesticides (Atrazine, Dicamba, Isoproturon, Lindane, Paraquat and Trifluralin) with differing physico-chemical properties were evaluated for the significance of 'bound' or non extractable residue formation. Investigations were carried out in purpose-built microcosms where mineralization, volatilisation, 'soil water' extractable and organic solvent extractable residues could be quantified. Extractable residues were defined as those accessible by sequential extraction where the solvent used became increasingly non-polar. Dichloromethane was the 'harshest' solvent used at the end of the sequential extraction procedure. {sup 14}C-labelled volatilised and {sup 14}CO{sub 2} fractions were trapped on exit from the microcosm. The pesticides were categorised into 3 classes based on their behaviour. (i) Type A (Atrazine, Lindane and Trifluralin) in which ring degradation was limited as was the formation of non-extractable residues; the remainder of the {sup 14}C-activity was found in the extractable fraction. (ii) Type B (Dicamba and Isoproturon) in which approximately 25% of the {sup 14}C-activity was mineralised and a large portion was found in the non-extractable fraction after 91 days. Finally, Type C (Paraquat) in which almost all of the {sup 14}C-activity was quickly incorporated into the non-extractable fraction. The implications of the data are discussed, with respect to the variability and significance of regulatory aspects of non-extractable residues.

Formation of non-extractable pesticide residues: observations on compound differences, measurement and regulatory issues

International Nuclear Information System (INIS)

Mordaunt, Catriona J.; Gevao, Bondi; Jones, Kevin C.; Semple, Kirk T.

2005-01-01

Six major use pesticides (Atrazine, Dicamba, Isoproturon, Lindane, Paraquat and Trifluralin) with differing physico-chemical properties were evaluated for the significance of 'bound' or non extractable residue formation. Investigations were carried out in purpose-built microcosms where mineralization, volatilisation, 'soil water' extractable and organic solvent extractable residues could be quantified. Extractable residues were defined as those accessible by sequential extraction where the solvent used became increasingly non-polar. Dichloromethane was the 'harshest' solvent used at the end of the sequential extraction procedure. 14 C-labelled volatilised and 14 CO 2 fractions were trapped on exit from the microcosm. The pesticides were categorised into 3 classes based on their behaviour. (i) Type A (Atrazine, Lindane and Trifluralin) in which ring degradation was limited as was the formation of non-extractable residues; the remainder of the 14 C-activity was found in the extractable fraction. (ii) Type B (Dicamba and Isoproturon) in which approximately 25% of the 14 C-activity was mineralised and a large portion was found in the non-extractable fraction after 91 days. Finally, Type C (Paraquat) in which almost all of the 14 C-activity was quickly incorporated into the non-extractable fraction. The implications of the data are discussed, with respect to the variability and significance of regulatory aspects of non-extractable residues

Fatique crack propagation in bimetallic welds influence of residual stresses and metallurgical look

International Nuclear Information System (INIS)

Zahouane, A.I.

1988-06-01

Generally, in nuclear power plants, many components made of austenitic stainless steels are very often replaced by low alloyed steels cladded with stainless steels, mainly for economical reasons. Due to cracks existing at the limit of the two kinds of steel, it is interesting to try to understand how they appear. Residual stresses are generally identified as one of the factors which act to produce these cracks. Measurements of such residual stresses have been performed, using the hole drilling method (drilling of a hole at the center of a gauge roset stuck at the surface of the material). Owing to the obtained results, it is possible to explain the decrease in the crack propagation rate observed, on fatigue crack growth test performed on specimens taken in the transition ferritic/austenitic zone. The stress intensity factor due to the residual stresses is valued by weight function method. It is possible to explain qualitatively the phenomena observed under cyclic loading when using the obtained value of this stress intensity factor. A more quantitative approach based on the use of an efficient stress intensity factor, allow to better describe the effect of residual stresses on the fatigue crack propagation in bimetallic welds [fr

Cycling of grain legume residue nitrogen

DEFF Research Database (Denmark)

Jensen, E.S.

1995-01-01

Symbiotic nitrogen fixation by legumes is the main input of nitrogen in ecological agriculture. The cycling of N-15-labelled mature pea (Pisum sativum L.) residues was studied during three years in small field plots and lysimeters. The residual organic labelled N declined rapidly during the initial...... management methods in order to conserve grain legume residue N sources within the soil-plant system....

Residue evaluation of imidacloprid, spirotetramat, and spirotetramat-enol in/on grapes (Vitis vinifera L.) and soil.

Science.gov (United States)

Mohapatra, Soudamini; Kumar, Sampath; Prakash, G S

2015-10-01

A combination of imidacloprid and spirotetramat effectively controls sucking pests on grapevines. Residues of these insecticides on grapes were evaluated after treatment with spirotetramat 12% + imidacloprid 12% (240 SC) three times at 90 and 180 g a.i. ha(-1). The samples were extracted and purified by QuEChERS method and analyzed by high-performance liquid chromatography with a photodiode array detector (imidacloprid) and gas chromatography mass spectrometry (spirotetramat and its metabolite spirotetramat-enol). Satisfactory results were obtained with ranges of 80.6-98.6% for the recovery, 3.1-10% for the relative standard deviation range, and 9.8-15.6% for the uncertainty. The limits of detection and quantification were 0.015 μg mL(-1) and 0.05 mg kg(-1), respectively. Initial residue concentrations of imidacloprid after the 90 and 180 g a.i. ha(-1) treatments were 0.912 (half-life 11 days) and 1.681 mg kg(-1) (half-life 12.4 days), respectively. For spirotetramat + spirotetramat-enol, the residue concentrations were 1.337 (half-life 5.6 days) and 2.0 mg kg(-1) (half-life 7.6 days) for the 90 and 180 g a.i. ha(-1) treatments, respectively. Spirotetramat degraded faster than spirotetramat-enol. After treatment at 90 g a.i. ha(-1), the initial residues of both insecticides were within European Union maximum residue limits and a 1-day pre-harvest interval (PHI) was adequate for safe consumption of grapes. After treatment at 180 g a.i. ha(-1), the required PHI was 7 day. Therefore, a PHI of 7 day should be used after treatment with imidacloprid and spirotetramat.

On root class residuality of HNN-extensions

International Nuclear Information System (INIS)

Tieudjo, D.