Analysis of margin index as a method for predicting residual disease after breast-conserving surgery in a European cancer center.

LENUS (Irish Health Repository)

Bolger, Jarlath C

2012-02-01

INTRODUCTION: Breast-conserving surgery (BCS), followed by appropriate adjuvant therapies is established as a standard treatment option for women with early-stage invasive breast cancers. A number of factors have been shown to correlate with local and regional disease recurrence. Although margin status is a strong predictor of disease recurrence, consensus is yet to be established on the optimum margin necessary. Margenthaler et al. recently proposed the use of a "margin index," combining tumor size and margin status as a predictor of residual disease after BCS. We applied this new predictive tool to a population of patients with primary breast cancer who presented to a symptomatic breast unit to determine its suitability in predicting those who require reexcision surgery. METHODS: Retrospective analysis of our breast cancer database from January 1, 2000 to June 30, 2010 was performed, including all patients who underwent BCS. Of 531 patients who underwent BCS, 27.1% (144\\/531) required further reexcision procedures, and 55 were eligible for inclusion in the study. Margin index was calculated as: margin index = closest margin (mm)\\/tumor size (mm) x 100, with index >5 considered optimum. RESULTS: Of the 55 patients included, 31% (17\\/55) had residual disease. Fisher\\'s exact test showed margin index not to be a significant predictor of residual disease on reexcision specimen (P = 0.57). Of note, a significantly higher proportion of our patients presented with T2\\/3 tumors (60% vs. 38%). CONCLUSIONS: Although an apparently elegant tool for predicting residual disease after BCS, we have shown that it is not applicable to a symptomatic breast unit in Ireland.

Association of body mass index with decline in residual kidney function after initiation of dialysis

NARCIS (Netherlands)

Drechsler, Christiane; de Mutsert, Renée; Grootendorst, Diana C.; Boeschoten, Elisabeth W.; Krediet, Raymond T.; le Cessie, Saskia; Wanner, Christoph; Dekker, Friedo W.; Apperloo, A. J.; Bijlsma, J. A.; Boekhout, M.; Boer, W. H.; Büller, H. R.; de Charro, F. T. H.; de Fijter, C. W. H.; Doorenbos, C. J.; Fagel, W. J.; Feith, G. W.; Frenken, L. A. M.; Gerlag, P. G. G.; Gorgels, J. P. M. C.; Grave, W.; Huisman, R. M.; Jager, K. J.; Jie, K.; Koning-Mulder, W. A. H.; Koolen, M. I.; Kremer Hovinga, T. K.; Lavrijssen, A. T. J.; Luik, A. J.; Parlevliet, K. J.; Raasveld, M. H. M.; Schonck, M. J. M.; Schuurmans, M. M. J.; Siegert, C. E. H.; Stegeman, C. A.; Stevens, P.; Thijssen, J. G. P.; Valentijn, R. M.; van Buren, M.; van den Dorpel, M. A.; van der Boog, P. J. M.; van der Meulen, J.; van der Sande, F. M.; van Es, A.; van Geelen, J. A. C. A.; Vastenburg, G. H.; Verburgh, C. A.; Vincent, H. H.; Vos, P. F.

2009-01-01

BACKGROUND: Obesity is a risk factor for loss of kidney function in the general population, but it is unknown whether it proceeds to affect residual kidney function when patients require dialysis. Our aim was to study the effects of body mass index (BMI) on decline in kidney function and risk to

Comparative ecobalancing accounting of semi-central house heat supply from wood residues; Vergleichende Oekobilanzierung der semi-zentralen Hauswaermebereitstellung aus Holzreststoffen

Energy Technology Data Exchange (ETDEWEB)

Biemann, Kirsten

2015-07-01

In 2008 almost 40 percent of the German final energy demand was used for room heating and hot water supply. To decrease environmental burdens and to save fossil resources a restructuring of the heating sector is needed. Therefore legislation enforces higher insulation standards of buildings and a more frequent use of renewable energies as well as heating networks. Wood as a renewable and storable energy source is an attractive fuel. However, it must be used as efficiently as possible because of limited wood supplies. Connecting buildings via a heating network is a good option since bigger heating plants can operate at higher efficiencies than small heaters. However, the higher insulation standards of the buildings often oppose the construction of a heating network, because heating networks work best with high energy demands and low network lengths. Therefore the environmental and economic feasibility of new heating networks needs to be checked beforehand. This thesis explores the environmental burdens of different semi- centralized heating networks using wood residues as fuel. A semi- centralized heating network is a network with no more than 500 customers and a heating plant with less than 5 MWth. While wood residues are used in the base load plant, peak load is covered by a gas heating plant. As a method to analyze the potential environmental burdens of the heat supply a life cycle assessment according to ISO 14040/44 is used. Opposed to former life cycle assessment studies, construction and operation of the network is included in the assessment. Even though the environmental impacts of the semi- centralized heating from wood residues are dominated by the heat supply, an observation of the impacts solely at the heating plant is not sufficient. By varying the boundary conditions of the heating network two main contributors to the environmental impacts are found. In addition to the heat production at the plant the type of the buildings in the settlement has a huge

Improving yield and composition of protein concentrates from green tea residue in an agri-food supply chain: Effect of pre-treatment

NARCIS (Netherlands)

Zhang, Chen; Krimpen, Van Marinus M.; Sanders, Johan P.M.; Bruins, Marieke E.

2016-01-01

Rather than improving crop-production yield, developing biorefinery technology for unused biomass from the agri-food supply chain may be the crucial factor to reach sustainable global food security. A successful example of food-driven biorefinery is the extraction of protein from green tea residues,

14 CFR 1273.33 - Supplies.

Science.gov (United States)

2010-01-01

... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Supplies. 1273.33 Section 1273.33..., Property, and Subawards § 1273.33 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant...

40 CFR 31.33 - Supplies.

Science.gov (United States)

2010-07-01

...) Disposition. If there is a residual inventory of unused supplies exceeding $5,000 in total aggregate fair... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Supplies. 31.33 Section 31.33... Requirements Changes, Property, and Subawards § 31.33 Supplies. (a) Title. Title to supplies acquired under a...

13 CFR 143.33 - Supplies.

Science.gov (United States)

2010-01-01

... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Supplies. 143.33 Section 143.33..., and Subawards § 143.33 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will...

29 CFR 1470.33 - Supplies.

Science.gov (United States)

2010-07-01

.... If there is a residual inventory of unused supplies exceeding $5,000 in total aggregate fair market... 29 Labor 4 2010-07-01 2010-07-01 false Supplies. 1470.33 Section 1470.33 Labor Regulations... Changes, Property, and Subawards § 1470.33 Supplies. (a) Title. Title to supplies acquired under a grant...

38 CFR 43.33 - Supplies.

Science.gov (United States)

2010-07-01

...) Disposition. If there is a residual inventory of unused supplies exceeding $5,000 in total aggregate fair... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Supplies. 43.33 Section... Requirements Changes, Property, and Subawards § 43.33 Supplies. (a) Title. Title to supplies acquired under a...

45 CFR 2541.330 - Supplies.

Science.gov (United States)

2010-10-01

... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 45 Public Welfare 4 2010-10-01 2010-10-01 false Supplies. 2541.330 Section 2541.330 Public Welfare..., Property and Subawards § 2541.330 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant...

32 CFR 33.33 - Supplies.

Science.gov (United States)

2010-07-01

...) Disposition. If there is a residual inventory of unused supplies exceeding $5,000 in total aggregate fair... 32 National Defense 1 2010-07-01 2010-07-01 false Supplies. 33.33 Section 33.33 National Defense... Requirements Changes, Property, and Subawards § 33.33 Supplies. (a) Title. Title to supplies acquired under a...

45 CFR 92.33 - Supplies.

Science.gov (United States)

2010-10-01

... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 45 Public Welfare 1 2010-10-01 2010-10-01 false Supplies. 92.33 Section 92.33 Public Welfare..., Property, and Subawards § 92.33 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant...

15 CFR 24.33 - Supplies.

Science.gov (United States)

2010-01-01

... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Supplies. 24.33 Section 24.33 Commerce..., and Subawards § 24.33 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will...

Security of feedstocks supply for future bio-ethanol production in Thailand

International Nuclear Information System (INIS)

Silalertruksa, Thapat; Gheewala, Shabbir H.

2010-01-01

This study assesses the security of feedstock supply to satisfy the increased demand for bio-ethanol production based on the recent 15 years biofuels development plan and target (year 2008-2022) of the Thai government. Future bio-ethanol systems are modeled and the feedstock supply potentials analyzed based on three scenarios including low-, moderate- and high-yields improvement. The three scenarios are modeled and key dimensions including availability; diversity; and environmental acceptability of feedstocks supply in terms of GHG reduction are evaluated through indicators such as net feedstock balances, Shannon index and net life cycle GHG emissions. The results show that only the case of high yields improvement scenario can result in a reliable and sufficient supply of feedstocks to satisfy the long-term demands for bio-ethanol and other related industries. Cassava is identified as the critical feedstock and a reduction in cassava export is necessary. The study concludes that to enhance long-term security of feedstocks supply for sustainable bio-ethanol production in Thailand, increasing use of sugarcane juice as feedstock, improved yields of existing feedstocks and promoting production of bio-ethanol derived from agricultural residues are three key recommendations that need to be urgently implemented by the policy makers. - Research highlights: →Bioethanol in Thailand derived from molasses, cassava, sugarcane juice could yield reductions of 64%, 49% and 87% in GHGs when compared to conventional gasoline. →High yields improvement are required for a reliable and sufficient supply of molasses, cassava and sugarcane to satisfy the long-term demands for bio-ethanol and other related industries. →Other factors to enhance long-term security of feedstocks supply for sustainable bioethanol production in Thailand include increasing use of sugarcane juice as feedstock and promoting production of bioethanol derived from agricultural residues.

28 CFR 66.33 - Supplies.

Science.gov (United States)

2010-07-01

... is a residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Supplies. 66.33 Section 66.33 Judicial... Supplies. (a) The Omnibus Crime Control and Safe Streets Act of 1968, as amended, Public Law 90-351...

Accuracy of a novel auto-CPAP device to evaluate the residual apnea-hypopnea index in patients with obstructive sleep apnea.

Science.gov (United States)

Nigro, Carlos Alberto; González, Sergio; Arce, Anabella; Aragone, María Rosario; Nigro, Luciana

2015-05-01

Patients under treatment with continuous positive airway pressure (CPAP) may have residual sleep apnea (RSA). The main objective of our study was to evaluate a novel auto-CPAP for the diagnosis of RSA. All patients referred to the sleep laboratory to undergo CPAP polysomnography were evaluated. Patients treated with oxygen or noninvasive ventilation and split-night polysomnography (PSG), PSG with artifacts, or total sleep time less than 180 min were excluded. The PSG was manually analyzed before generating the automatic report from auto-CPAP. PSG variables (respiratory disturbance index (RDI), obstructive apnea index, hypopnea index, and central apnea index) were compared with their counterparts from auto-CPAP through Bland-Altman plots and intraclass correlation coefficient. The diagnostic accuracy of autoscoring from auto-CPAP using different cutoff points of RDI (≥5 and 10) was evaluated by the receiver operating characteristics (ROCs) curve. The study included 114 patients (24 women; mean age and BMI, 59 years old and 33 kg/m(2); RDI and apnea/hypopnea index (AHI)-auto median, 5 and 2, respectively). The average difference between the AHI-auto and the RDI was -3.5 ± 3.9. The intraclass correlation coefficient (ICC) between the total number of central apneas, obstructive, and hypopneas between the PSG and the auto-CPAP were 0.69, 0.16, and 0.15, respectively. An AHI-auto >2 (RDI ≥ 5) or >4 (RDI ≥ 10) had an area under the ROC curve, sensitivity, specificity, positive likelihood ratio, and negative for diagnosis of residual sleep apnea of 0.84/0.89, 84/81%, 82/91%, 4.5/9.5, and 0.22/0.2, respectively. The automatic analysis from auto-CPAP (S9 Autoset) showed a good diagnostic accuracy to identify residual sleep apnea. The absolute agreement between PSG and auto-CPAP to classify the respiratory events correctly varied from very low (obstructive apneas, hypopneas) to moderate (central apneas).

Supply chains of forest chip production in Finland

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, Kalle (Metsaeteho Oy, Helsinki (Finland)), e-mail: kalle.karha@metsateho.fi

2010-07-15

The Metsaeteho study investigated how logging residue chips, stump wood chips, and chips from small sized thinning wood and large-sized (rotten) roundwood used by heating and power plants were produced in Finland in 2008. Almost all the major forest chip suppliers in Finland were involved in the study. The total volume of forest chips supplied in 2008 by these suppliers was 6.5 TWh. The study was implemented by conducting an e-mail questionnaire survey and telephone interviews. Research data was collected in March-May 2009. The majority of the logging residue chips and chips from small-sized thinning wood were produced using the roadside chipping supply chain in Finland in 2008. The chipping at plant supply chain was also significant in the production of logging residue chips. 70% of all stump wood chips consumed were comminuted at the plant and 29% at terminals. The role of the terminal chipping supply chain was also significant in the production of chips from logging residues and small-sized wood chips. When producing chips from large-sized (rotten) roundwood, nearly a half of chips were comminuted at plants and more than 40% at terminals

Supply systems of forest chip production in Finland

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K. (Metsaeteho Oy, Helsinki (Finland)), e-mail: kalle.karha@metsateho.fi

2010-07-01

The Metsaeteho study investigated how logging residue chips, stump wood chips, and chips from small-diameter thinning wood and large-sized (rotten) roundwood used by heating and power plants were produced in Finland in 2009. Almost all the major forest chip suppliers in Finland were involved in the study. The total volume of forest chips supplied in 2009 by these suppliers was 8,4 TWh. The study was implemented by conducting an e-mail questionnaire survey and telephone interviews. Research data was collected from March-May, 2010. The majority of the logging residue chips and chips from small-diameter thinning wood were produced using the roadside chipping supply system in Finland in 2009. The chipping at plant supply system was also significant in the production of logging residue chips. Nearly 70 % of all stump wood chips consumed were comminuted at the plant and 28 % at terminals. The role of the terminal chipping supply system was also significant in the production of chips from logging residues and small-diameter wood chips. When producing chips from large-sized (rotten) roundwood, similarly roughly 70 % of chips were comminuted at plants and 23 % at terminals. (orig.)

Supply chains of forest chip production in Finland

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K. (Metsaeteho Oy, Helsinki (Finland)), Email: kalle.karha@metsateho.fi

2009-07-01

The Metsaeteho study investigated how logging residue chips. stump wood chips, and chips from small-sized thinning wood and large-sized (rotten) roundwood used by heating and power plants were produced in Finland in 2008. Almost all the major forest chip suppliers in Finland were involved in the study. The total volume of forest chips supplied in 2008 by these suppliers was 6,5 TWh. The study was implemented by conducting an e-mail questionnaire survey and telephone interviews. Research data was collected in March-May 2009. The majority of the logging residue chips and chips from small-sized thinning wood were produced using the roadside chipping supply chain in Finland in 2008. The chipping at plant supply chain was also significant in the production of logging residue chips. 70% of all stump wood chips consumed were comminuted at the plant and 29% at terminals. The role of the terminal chipping supply chain was also significant in the production of chips from logging residues and small-sized wood chips. When producing chips from large-sized (rotten) roundwood, nearly a half of chips were comminuted at plants and more than 40 % at terminals. (orig.)

Setting up fuel supply strategies for large-scale bio-energy projects using agricultural and forest residues. A methodology for developing countries

International Nuclear Information System (INIS)

Junginger, M.

2000-08-01

The objective of this paper is to develop a coherent methodology to set up fuel supply strategies for large-scale biomass-conversion units. This method will explicitly take risks and uncertainties regarding availability and costs in relation to time into account. This paper aims at providing general guidelines, which are not country-specific. These guidelines cannot provide 'perfect fit'-solutions, but aim to give general help to overcome barriers and to set up supply strategies. It will mainly focus on residues from the agricultural and forestry sector. This study focuses on electricity or both electricity and heat production (CHP) with plant scales between 1040 MWe. This range is chosen due to rules of economies of scale. In large-scale plants the benefits of increased efficiency outweigh increased transportation costs, allowing a lower price per kWh which in turn may allow higher biomass costs. However, fuel-supply risks tend to get higher with increasing plant size, which makes it more important to assess them for large(r) conversion plants. Although the methodology does not focus on a specific conversion technology, it should be stressed that the technology must be able to handle a wide variety of biomass fuels with different characteristics because many biomass residues are not available the year round and various fuels are needed for a constant supply. The methodology allows for comparing different technologies (with known investment and operational and maintenance costs from literature) and evaluation for different fuel supply scenarios. In order to demonstrate the methodology, a case study was carried out for the north-eastern part of Thailand (Isaan), an agricultural region. The research was conducted in collaboration with the Regional Wood Energy Development Programme in Asia (RWEDP), a project of the UN Food and Agricultural Organization (FAO) in Bangkok, Thailand. In Section 2 of this paper the methodology will be presented. In Section 3 the economic

Energy security of supply under EU climate policies

International Nuclear Information System (INIS)

Groenenberg, H.; Wetzelaer, B.J.H.W.

2006-12-01

The implications of various climate policies for the security of supply in the EU-25 were investigated. The security of supply was quantified using the Supply/Demand (S/D) Index. This index aggregates quantitative information on a country's energy system into one single figure. It takes a value between 0 and 100, with higher values indicating a more secure energy system. The S/D Index was calculated for the year 2020 based on the information in a series of policy scenarios, including a baseline (S/D Index 50.7), an energy efficiency scenario (53.8), two renewable energy scenarios (52.6 and 53.3) and two scenarios with combined policies (55.9 and 55.6).The S/D Index proved a useful indicator for assessing the implications of climate policies for the security of supply. As climate policies become more stringent, CO2 index fall, and the S/D index increases. The magnitude of the changes in the two indices is not always similar however. Major falls in CO2 indices in the order of 20% for two scenarios with combined energy efficiency and renewable energy polices lead to less noteworthy improvements in the associated S/D indices. Nevertheless, this combination of policies leads to the greatest improvements in the security of supply

The Effectiveness of Monetary Policy Towards Stock Index Case Study : Jakarta Islamic Index 2006-2014

Directory of Open Access Journals (Sweden)

Lak lak Nashat el Hasanah

2016-06-01

Full Text Available Fluctuation in economy situation is an important indicator for investor decision making. The investor actions are base on the minimum risk while having maximum profit. One of it is observing the condition of macro variables within monetary policy. This research aims to analyze the impact of inflation, money supply, exchange rate, and birate towards stock of jakarta islamic Index. The type data used is times series periode 2006-2014. Multiple linier regression with chow test and dummy variable approach to compare and to know the behavior of each independent variables. The result shows partially that birate and exchange rate negatively impact Jakarta Islamic Index before global monetary crisis in 2008, while inflation and money supply not that significantly impact. After global monetary crisis in 2008, partially, birate variable and money supply significantly giving positive influence to Jakarta Islamic Index, while at same time exchange rate and inflation are not significantly influencial. Simultaneously, inflation, money supply, exchange rate, and birate influence Jakarta islamic Index.

Cement production from coal conversion residues

International Nuclear Information System (INIS)

Brown, L.D.; Clavenna, L.R.; Eakman, J.M.; Nahas, N.C.

1981-01-01

Cement is produced by feeding residue solids containing carbonaceous material and ash constituents obtained from converting a carbonaceous feed material into liquids and/or gases into a cement-making zone and burning the carbon in the residue solids to supply at least a portion of the energy required to convert the solids into cement

Assessment of procurement systems for unutilized logging residues ...

African Journals Online (AJOL)

... in the forest after clear-cutting operation with cutto- length harvesting method. ... as system-2 can be preferable for the initial supply chain configuration in Turkey. ... Key words: logging residue, forest biomass, chipping, supply cost, biomass ...

49 CFR 19.35 - Supplies and other expendable property.

Science.gov (United States)

2010-10-01

... is a residual inventory of unused supplies exceeding $5000 in total aggregate value upon termination... 49 Transportation 1 2010-10-01 2010-10-01 false Supplies and other expendable property. 19.35... ORGANIZATIONS Post-Award Requirements Property Standards § 19.35 Supplies and other expendable property. (a...

Design Principles for Closed Loop Supply Chains

NARCIS (Netherlands)

H.R. Krikke (Harold); C.P. Pappis (Costas); G.T. Tsoulfas; J.M. Bloemhof-Ruwaard (Jacqueline)

2001-01-01

textabstractIn this paper we study design principles for closed loop supply chains. Closed loop supply chains aim at closing material flows thereby limiting emission and residual waste, but also providing customer service at low cost. We study 'traditional' and 'new' design principles known in the

Building a Natural Disaster Risk Index for Supply Chain Operations

OpenAIRE

Kun Liao; Ozden Bayazit; Fang Wang

2014-01-01

Risk for an organization is associated with uncertainties in all areas of its operations. As firms move toward global sourcing, supply chain risk increases dramatically, which is linked to lower financial performance and market value. One major type of supply chain risk is disruptions caused by natural or man-made disasters. In this paper, major factors causing supply chain disruptions are identified based on resource dependency theory and contingency theory. As a result of the study, a compr...

7 CFR 550.40 - Supplies and other expendable property.

Science.gov (United States)

2010-01-01

... is a residual inventory of unused supplies exceeding $5,000 in total aggregate value upon termination... 7 Agriculture 6 2010-01-01 2010-01-01 false Supplies and other expendable property. 550.40 Section... Management of Agreements Equipment/property Standards § 550.40 Supplies and other expendable property. (a...

22 CFR 518.35 - Supplies and other expendable property.

Science.gov (United States)

2010-04-01

... is a residual inventory of unused supplies exceeding $5000 in total aggregate value upon termination... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Supplies and other expendable property. 518.35... ORGANIZATIONS Post-Award Requirements Property Standards § 518.35 Supplies and other expendable property. (a...

15 CFR 14.35 - Supplies and other expendable property.

Science.gov (United States)

2010-01-01

... recipient upon acquisition. If there is a residual inventory of supplies exceeding $5000 in total aggregate... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Supplies and other expendable property...-PROFIT, AND COMMERCIAL ORGANIZATIONS Post-Award Requirements Property Standards § 14.35 Supplies and...

10 CFR 600.135 - Supplies and other expendable property.

Science.gov (United States)

2010-01-01

... acquisition. If there is a residual inventory of unused supplies exceeding $5000 in total aggregate value upon... 10 Energy 4 2010-01-01 2010-01-01 false Supplies and other expendable property. 600.135 Section... Education, Hospitals, and Other Nonprofit Organizations Post-Award Requirements § 600.135 Supplies and other...

45 CFR 2543.35 - Supplies and other expendable property.

Science.gov (United States)

2010-10-01

... acquisition. If there is a residual inventory of unused supplies exceeding $5,000 in total aggregate value... 45 Public Welfare 4 2010-10-01 2010-10-01 false Supplies and other expendable property. 2543.35... OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 2543.35 Supplies and other...

Spatial distribution of water supply reliability and critical links of water supply to crucial water consumers under an earthquake

International Nuclear Information System (INIS)

Wang Yu; Au, S.-K.

2009-01-01

This paper describes a process to characterize spatial distribution of water supply reliability among various consumers in a water system and proposes methods to identify critical links of water supply to crucial water consumers under an earthquake. Probabilistic performance of water supply is reflected by the probability of satisfying consumers' water demand, Damage Consequence Index (DCI) and Upgrade Benefit Index (UBI). The process is illustrated using a hypothetical water supply system, where direct Monte Carlo simulation is used for estimating the performance indices. The reliability of water supply to consumers varies spatially, depending on their respective locations in the system and system configuration. The UBI is adopted as a primary index in the identification of critical links for crucial water consumers. A pipe with a relatively large damage probability is likely to have a relatively large UBI, and hence, to be a critical link. The concept of efficient frontier is employed to identify critical links of water supply to crucial water consumers. It is found that a group of links that have the largest UBI individually do not necessarily have the largest group UBI, or be the group of critical links

Monitoring the Vulnerability of Energy Supply System

International Nuclear Information System (INIS)

Gnansonounou, E.

2006-01-01

Due to the increasing complexity of the world evolution, the public decision makers, the energy supply industry and the consumers in industrialised countries are more and more sensitive to the vulnerability of energy supply. The emergence of new big consumer countries and the perspective of oil and gas depletion at the end of the current century raise the concerns about how to share fairly the remaining resources for the common and sustainable development of the mankind. Erratic energy prices discourage investment and delay the energy transition. Voluntary measures are needed mainly in industrialised countries in order to develop alternative and sustainable energy sources and to avoid world struggle for energy procurement. In this contribution a synthetic energy vulnerability index is defined for monitoring energy supply vulnerability. The proposed index is based on energy intensity, oil and gas import dependency, CO 2 content of primary energy supply, electricity supply vulnerability and non-diversity in transport fuels. The preliminary assessment of this synthetic index for selected industrialised countries provides promising results that need however further refinement.(author)

Supply chain modeling of forest fuel

Energy Technology Data Exchange (ETDEWEB)

Gunnarsson, Helene; Lundgren, Jan T.; Roennqvist, Mikael

2001-04-01

We study the problem of deciding when and where forest residues are to be converted into forest fuel, and how the residues are to be transported and stored in order to satisfy demand at heating plants. Decisions also include whether or not additional harvest areas and saw-mills are to be contracted. In addition, we consider the flow of products from saw-mills and import harbors, and address the question about which terminals to use. The planning horizon is one year and monthly time periods are considered. The supply chain problem is formulated as a large mixed integer linear programming model. In order to obtain solutions within reasonable time we have developed a heuristic solution approach. Computational results from a large Swedish supplying entrepreneur are reported.

Supply chain modeling of forest fuel

International Nuclear Information System (INIS)

Gunnarsson, Helene; Lundgren, Jan T.; Roennqvist, Mikael

2001-04-01

We study the problem of deciding when and where forest residues are to be converted into forest fuel, and how the residues are to be transported and stored in order to satisfy demand at heating plants. Decisions also include whether or not additional harvest areas and saw-mills are to be contracted. In addition, we consider the flow of products from saw-mills and import harbors, and address the question about which terminals to use. The planning horizon is one year and monthly time periods are considered. The supply chain problem is formulated as a large mixed integer linear programming model. In order to obtain solutions within reasonable time we have developed a heuristic solution approach. Computational results from a large Swedish supplying entrepreneur are reported

An improved water budget for the El Yunque National Forest, Puerto Rico, as determined by the Water Supply Stress Index Model

Science.gov (United States)

Liangxia Zhang; Ge Sun; Erika Cohen; Steven McNulty; Peter Caldwell; Suzanne Krieger; Jason Christian; Decheng Zhou; Kai Duan; Keren J. Cepero-Pérez

2018-01-01

Quantifying the forest water budget is fundamental to making science-based forest management decisions. This study aimed at developing an improved water budget for the El Yunque National Forest (ENF) in Puerto Rico, one of the wettest forests in the United States. We modified an existing monthly scale water balance model, Water Supply Stress Index (WaSSI), to reflect...

ENDOGENEITY OF INDONESIAN MONEY SUPPLY

OpenAIRE

Rachma, Meutia Safrina

2011-01-01

There has been a long debate about the endogeneity of money supply. The main objective of this article is to identify whether money supply in Indonesia is an exogenous or an endogenous variable. Using a Vector Autoregressive model and monthly data 1997(5)-2010(6), the estimation result shows that money supply in Indonesia is an endogenous variable. The movement of broad money supply does influence the movement of base money and Consumer Price Index. Consequently, the central bank does not hav...

Endogeneity Of Indonesian Money Supply

OpenAIRE

Rachma, Meutia Safrina

2010-01-01

There has been a long debate about the endogeneity of money supply. The main objective of this article is to identify whether money supply in Indonesia is an exogenous or an endogenous variable. Using a Vector Autoregressive model and monthly data 1997(5)-2010(6), the estimation result shows that money supply in Indonesia is an endogenous variable. The movement of broad money supply does influence the movement of base money and Consumer Price Index. Consequently, the central bank does not hav...

ENDOGENEITY OF INDONESIAN MONEY SUPPLY

Directory of Open Access Journals (Sweden)

Meutia Safrina Rachma

2011-09-01

Full Text Available There has been a long debate about the endogeneity of money supply. The main objective of this article is to identify whether money supply in Indonesia is an exogenous or an endogenous variable. Using a Vector Autoregressive model and monthly data 1997(5-2010(6, the estimation result shows that money supply in Indonesia is an endogenous variable. The movement of broad money supply does influence the movement of base money and Consumer Price Index. Consequently, the central bank does not have control power on money supply. The bank is only able to maintain the stability and control the movement of broad money supply. Keywords: Endogenous variable, money supply, vector autoregressionJEL classification numbers: E51, E52, E58

The Study of Residual Voltage of Induction Motor and the Influence of Various Parameters on the Residual Voltage

Science.gov (United States)

Zhang, Shuping; Zhao, Chen; Tan, Weipu

2017-05-01

The majority important load of industrial area is mainly composed of induction motor, it is more common that induction motor becomes sluggishness and even tripping due to the lose of power supply or other malfunction in the practical work. In this paper, space vector method is used to establish a reduced order model of induction motor, and then study the changes of motor electromagnetic after losing electricity. Based on motion equations of the rotor and magnetic flux conservation principle, it uses mathematical methods to deduce the expression of rotor current, rotor flux, the stator flux and the residual voltage of stator side. In addition, relying on thermal power plants, it uses the actual data of power plants, takes DIgsilent software to simulate the residual voltage of motor after losing electricity. analyses the influence on the residual voltage with the changes of the moment of inertia, load ratio, initial size of slip and the load characteristic of induction motor. By analysis of these, it has a more detailed understanding about the changes of residual voltage in practical application, in additional, it is more beneficial to put into standby power supply safely and effectively, moreover, reduce the influence of the input process to the whole system.

Security of supply in Ireland 2006

International Nuclear Information System (INIS)

Bazilian, Morgan; O'Leary, Fergal; O Gallachoir, Brian; Howley, Martin

2006-12-01

This is the second annual report on the title theme from SEI. Since SEI's initial security of supply publication there has been considerable attention paid to the security of supply aspects of energy policy worldwide. This reports updates and refines the metrics used to consider security of supply in Ireland. It also presents new analysis in three areas; the development of a supply/demand index, use of mean variance portfolio analysis for the electricity sector and a high oil price energy forecast scenario

Forest industry wood fuel supply

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-01

The potential for wood fired energy production in the UK is significant. Large scale developments are currently underway which could utilise over 100,000 green tonnes of forest residues. The fuel supply chain is likely to be complicated and there are perceived risks in its organisation and security. This report sets out to address some of these perceived risks and suggest suitable measures to reduce it. Six areas of the fuel supply chain have been studied, namely; Extraction, Comminution, Transport, Assessment and payment of wood fuel; Environmental impact; Nutrient recycling (ash disposal). (author)

Measuring the security of external energy supply in the European Union

Energy Technology Data Exchange (ETDEWEB)

Le Coq, Chloe [SITE, Stockholm School of Economics, P.O. Box 6501, Stockholm 11383 (Sweden); Paltseva, Elena [Department of Economics, Copenhagen University, Oester Farimagsgade 5, Building 26, 1353 Copenhagen (Denmark)

2009-11-15

The security of energy supply is one of the main objectives of EU energy policy. In this paper, we introduce an index designed to evaluate the short-term risks associated with the external supply of energy to the EU Member States. It combines measures of energy import diversification, political risks of the supplying country, risk associated with energy transit, and the economic impact of a supply disruption. We construct separate indexes for three primary energy types, oil, gas and coal, and demonstrate that Member States' levels of supply risk exposure differ across energies. Most other studies of this kind provide aggregate indexes combining different types of energy. Our results suggest that an aggregate approach could be misleading, at least for discussions of the short-term response to risks. We discuss the implications of our findings for the common energy policy. (author)

Measuring the security of external energy supply in the European Union

International Nuclear Information System (INIS)

Le Coq, Chloe; Paltseva, Elena

2009-01-01

The security of energy supply is one of the main objectives of EU energy policy. In this paper, we introduce an index designed to evaluate the short-term risks associated with the external supply of energy to the EU Member States. It combines measures of energy import diversification, political risks of the supplying country, risk associated with energy transit, and the economic impact of a supply disruption. We construct separate indexes for three primary energy types, oil, gas and coal, and demonstrate that Member States' levels of supply risk exposure differ across energies. Most other studies of this kind provide aggregate indexes combining different types of energy. Our results suggest that an aggregate approach could be misleading, at least for discussions of the short-term response to risks. We discuss the implications of our findings for the common energy policy. (author)

Oil vulnerability index of oil-importing countries

International Nuclear Information System (INIS)

Gupta, Eshita

2008-01-01

This paper assesses the relative oil vulnerability of 26 net oil-importing countries for the year 2004 on the basis of various indicators - the ratio of value of oil imports to gross domestic product (GDP), oil consumption per unit of GDP, GDP per capita and oil share in total energy supply, ratio of domestic reserves to oil consumption, exposure to geopolitical oil market concentration risks as measured by net oil import dependence, diversification of supply sources, political risk in oil-supplying countries, and market liquidity. The approach using the principal component technique has been adopted to combine these individual indicators into a composite index of oil vulnerability. Such an index captures the relative sensitivity of various economies towards developments of the international oil market, with a higher index indicating higher vulnerability. The results show that there are considerable differences in the values of individual indicators of oil vulnerability and overall oil vulnerability index among the countries (both inter and intraregional). (author)

Oil vulnerability index of oil-importing countries

Energy Technology Data Exchange (ETDEWEB)

Gupta, Eshita [The Energy and Resources Institute, Darbari Seth Block, Habitat Place, New Delhi 110 003 (India)

2008-03-15

This paper assesses the relative oil vulnerability of 26 net oil-importing countries for the year 2004 on the basis of various indicators - the ratio of value of oil imports to gross domestic product (GDP), oil consumption per unit of GDP, GDP per capita and oil share in total energy supply, ratio of domestic reserves to oil consumption, exposure to geopolitical oil market concentration risks as measured by net oil import dependence, diversification of supply sources, political risk in oil-supplying countries, and market liquidity. The approach using the principal component technique has been adopted to combine these individual indicators into a composite index of oil vulnerability. Such an index captures the relative sensitivity of various economies towards developments of the international oil market, with a higher index indicating higher vulnerability. The results show that there are considerable differences in the values of individual indicators of oil vulnerability and overall oil vulnerability index among the countries (both inter and intraregional). (author)

Problems of metrological supply of carbon materials production

International Nuclear Information System (INIS)

Belov, G.V.; Bazilevskij, L.P.; Cherkashina, N.V.

1989-01-01

Carbon materials and products contain internal residual stresses and have an anisotropy of properties therefore special methods of tests are required to control their quality. The main metrological problems during development, production and application of carbon products are: metrological supply of production forms and records during the development of production conditions; metrological supply of quality control of the product; metrological supply of methods for the tests of products and the methods to forecast the characteristics of product quality for the period of quaranteed service life

Nuclear reactor with makeup water assist from residual heat removal system

Science.gov (United States)

Corletti, Michael M.; Schulz, Terry L.

1993-01-01

A pressurized water nuclear reactor uses its residual heat removal system to make up water in the reactor coolant circuit from an in-containment refueling water supply during staged depressurization leading up to passive emergency cooling by gravity feed from the refueling water storage tank, and flooding of the containment building. When depressurization commences due to inadvertence or a manageable leak, the residual heat removal system is activated manually and prevents flooding of the containment when such action is not necessary. Operation of the passive cooling system is not impaired. A high pressure makeup water storage tank is coupled to the reactor coolant circuit, holding makeup coolant at the operational pressure of the reactor. The staged depressurization system vents the coolant circuit to the containment, thus reducing the supply of makeup coolant. The level of makeup coolant can be sensed to trigger opening of successive depressurization conduits. The residual heat removal pumps move water from the refueling water storage tank into the coolant circuit as the coolant circuit is depressurized, preventing reaching the final depressurization stage unless the makeup coolant level continues to drop. The residual heat removal system can also be coupled in a loop with the refueling water supply tank, for an auxiliary heat removal path.

Nuclear reactor with makeup water assist from residual heat removal system

International Nuclear Information System (INIS)

Corletti, M.M.; Schulz, T.L.

1993-01-01

A pressurized water nuclear reactor uses its residual heat removal system to make up water in the reactor coolant circuit from an in-containment refueling water supply during staged depressurization leading up to passive emergency cooling by gravity feed from the refueling water storage tank, and flooding of the containment building. When depressurization commences due to inadvertence or a manageable leak, the residual heat removal system is activated manually and prevents flooding of the containment when such action is not necessary. Operation of the passive cooling system is not impaired. A high pressure makeup water storage tank is coupled to the reactor coolant circuit, holding makeup coolant at the operational pressure of the reactor. The staged depressurization system vents the coolant circuit to the containment, thus reducing the supply of makeup coolant. The level of makeup coolant can be sensed to trigger opening of successive depressurization conduits. The residual heat removal pumps move water from the refueling water storage tank into the coolant circuit as the coolant circuit is depressurized, preventing reaching the final depressurization stage unless the makeup coolant level continues to drop. The residual heat removal system can also be coupled in a loop with the refueling water supply tank, for an auxiliary heat removal path. 2 figures

Nuclear reactor with makeup water assist from residual heat removal system

Science.gov (United States)

Corletti, M.M.; Schulz, T.L.

1993-12-07

A pressurized water nuclear reactor uses its residual heat removal system to make up water in the reactor coolant circuit from an in-containment refueling water supply during staged depressurization leading up to passive emergency cooling by gravity feed from the refueling water storage tank, and flooding of the containment building. When depressurization commences due to inadvertence or a manageable leak, the residual heat removal system is activated manually and prevents flooding of the containment when such action is not necessary. Operation of the passive cooling system is not impaired. A high pressure makeup water storage tank is coupled to the reactor coolant circuit, holding makeup coolant at the operational pressure of the reactor. The staged depressurization system vents the coolant circuit to the containment, thus reducing the supply of makeup coolant. The level of makeup coolant can be sensed to trigger opening of successive depressurization conduits. The residual heat removal pumps move water from the refueling water storage tank into the coolant circuit as the coolant circuit is depressurized, preventing reaching the final depressurization stage unless the makeup coolant level continues to drop. The residual heat removal system can also be coupled in a loop with the refueling water supply tank, for an auxiliary heat removal path. 2 figures.

Pharmacokinetics, efficacy prediction indexes and residue depletion of antibacterial drugs.

Directory of Open Access Journals (Sweden)

Arturo Anadón

2016-06-01

Full Text Available Pharmacokinetics behaviour of the antibacterial in food producing animals, provides information on the rates of absorption and elimination, half-life in plasma and tissue, elimination pathways and metabolism. The dose and the dosing interval of the antimicrobial can be justified by considering the pharmacokinetic/pharmacodynamic (PK/PD relationship, if established, as well as the severity of the disease, whereas the number of administrations should be in line with the nature of the disease. The target population for therapy should be well defined and possible to identify under field conditions. Based on in vitro susceptibility data, and target animal PK data, an analysis for the PK/PD relationship may be used to support dose regimen selection and interpretation criteria for a clinical breakpoint. Therefore, for all antibacterials with systemic activity, the MIC data collected should be compared with the concentration of the compound at the relevant biophase following administration at the assumed therapeutic dose as recorded in the pharmacokinetic studies. Currently, the most frequently used parameters to express the PK/PD relationship are Cmax/MIC (maximum serum concentration/MIC, %T > MIC (fraction of time in which concentration exceeds MIC and AUC/MIC (area under the inhibitory concentration– time curve/MIC. Furthermore, the pharmacokinetic parameters provide the first indication of the potential for persistent residues and the tissues in which they may occur. The information on residue depletion in food-producing animals, provides the data on which MRL recommendations will be based. A critical factor in the antibacterial medication of all food-producing animals is the mandatory withdrawal period, defined as the time during which drug must not be administered prior to the slaughter of the animal for consumption. The withdrawal period is an integral part of the regulatory authorities’ approval process and is designed to ensure that no

GEOGRAPHICALANALYSIS WITH GIS METHODOLOGY FOR A SUSTAINABLE USE OF LOGGING RESIDUES IN MOUNTAINOUS AREA

Directory of Open Access Journals (Sweden)

Raffaele Cavalli

2007-09-01

Full Text Available A GIS-based approach is presented in order to define a decision support system tool for strategic planning of forest biomass supply chain for a heating/energy use. The presented GIS-based approach focus its analysis on forest management data, road network characteristics, terrain features and chipping and transporting cost. According to two different heating plants location, results on the availability of logging residues for energy use are presented in form of cost supply curves. For the investigated case study, supply curves evidence that, also at local level, different locations of heating plants can affect the cost-efficient use of logging residues in form of wood chips.

Effect of water content and organic carbon on remote sensing of crop residue cover

Science.gov (United States)

Serbin, G.; Hunt, E. R., Jr.; Daughtry, C. S. T.; McCarty, G. W.; Brown, D. J.; Doraiswamy, P. C.

2009-04-01

Crop residue cover is an important indicator of tillage method. Remote sensing of crop residue cover is an attractive and efficient method when compared with traditional ground-based methods, e.g., the line-point transect or windshield survey. A number of spectral indices have been devised for residue cover estimation. Of these, the most effective are those in the shortwave infrared portion of the spectrum, situated between 1950 and 2500 nm. These indices include the hyperspectral Cellulose Absorption Index (CAI), and advanced multispectral indices, i.e., the Lignin-Cellulose Absorption (LCA) index and the Shortwave Infrared Normalized Difference Residue Index (SINDRI), which were devised for the NASA Terra Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor. Spectra of numerous soils from U.S. Corn Belt (Indiana and Iowa) were acquired under wetness conditions varying from saturation to oven-dry conditions. The behavior of soil reflectance with water content was also dependent on the soil organic carbon content (SOC) of the soils, and the location of the spectral bands relative to significant water absorptions. High-SOC soils showed the least change in spectral index values with increase in soil water content. Low-SOC soils, on the other hand, showed measurable difference. For CAI, low-SOC soils show an initial decrease in index value followed by an increase, due to the way that water content affects CAI spectral bands. Crop residue CAI values decrease with water content. For LCA, water content increases decrease crop residue index values and increase them for soils, resulting in decreased contrast. SINDRI is also affected by SOC and water content. As such, spatial information on the distribution of surface soil water content and SOC, when used in a geographic information system (GIS), will improve the accuracy of remotely-sensed crop residue cover estimates.

Projecting demand and supply of forest biomass for heating in Norway

International Nuclear Information System (INIS)

Tromborg, Erik; Havskjold, Monica; Lislebo, Ole; Rorstad, Per Kristian

2011-01-01

This paper assesses the increase in demand and supply for forest biomass for heating in Norway in 2020. By then there is a political aim to double the national production of bioenergy from the level in 2008. The competitiveness of woody biomass in central and district heating is analyzed in a model selecting the least-cost heating technology and scale in municipalities given a set of constraints and under different fuels price scenarios. The supply of forest biomass from roundwood is estimated based on data of forest inventories combined with elasticities regarding price and standing volumes. The supply of biomass from harvesting residues is estimated in an engineering approach based on data from the national forest inventories and roundwood harvest. The results show how the production of bioenergy is affected by changes in energy prices and support schemes for bioenergy. One conclusion from the analyses is that the government target of 14 TWh more bioenergy by 2020 is not likely to be met by current technologies and policy incentives. The contribution of the analysis is the detailed presentation of the heat market potentials and technology choices combined with supply functions for both roundwood and harvesting residues. - Highlights: → This paper accesses the demand and supply for forest biomass for heating in Norway in 2020. → Market share for wood in central and new district heating is analyzed in a cost-minimizing model. → The supply of forest biomass includes wood chips from import, roundwood and harvesting residues. → The production of bioenergy is affected by changes in energy prices and support schemes. → The government target for bioenergy is not met by current technologies and policy incentives.

Assessment of cellulose purification methods from the residue of enzymatic hydrolysis of sugarcane bagasse for the production of cellulose nanocrystals

International Nuclear Information System (INIS)

Camargo, Lais Angelice de; Farinas, Cristiane Sanchez; Marconcini, José Manoel; Mattoso, Luiz Henrique Capparelli; Pereira, Sandra Cerqueira

2016-01-01

Full text: Over the years, there is a growing trend in the reuse of residues from the agricultural industries due to social, environmental and economic demands. The production of Brazilian sugarcane in the 2014/15 season was more than 640 million tons, estimating that one third of this total is bagasse [1]. After enzymatic hydrolysis of bagasse in order to give the 2G ethanol, remains a solid fibrous residue which can be repurposed in other processes. This study evaluated four methods for the purification of the resulting solid fibrous residue from the enzymatic hydrolysis process of bagasse, with the intention of obtaining cellulose. Measurements of the crystallinity index (CI) of the cellulose contained in the samples were determined using X-ray Diffraction (XRD). The enzymatic hydrolysis of generates a fibrous solid residue with contents of lignin and cellulose. This residue was subjected to four purification methods: I) 100 mL of NaOH (5%, w/w) at 55 °C was added to 5 g of residue and 43 mL of H 2 O 2 (35%, v/v) under stirring for 1.5 hours; II) the same procedure was repeated on the resulting material from I; III) 105 mL of solution 10:1 (ν/ν) of CH 3 COOH and HNO 3 at 60 °C was added to 5 g of residue under stirring for 30 minutes; IV) reaction with a solution composed of 1 ml of CH 3 COOH and 2.5 g of NaClO 2 at 70 °C under stirring for 1 hour and after that time, the procedure was repeated twice and then the solution was kept under stirring for further 3 hours. The crystallinity indexes found for the purification procedures were: I) 81.7%; II) 83.2%; III) 52.1% e IV) 77.2%. The best result was found for the material subjected to the method II. This process (II) generated a material composed of high content of crystalline cellulose. References: [1] CONAB (National Supply Company), 2015. (author)

Effects of Synchronization of Carbohydrate and Protein Supply in Total Mixed Ration with Korean Rice Wine Residue on Ruminal Fermentation, Nitrogen Metabolism and Microbial Protein Synthesis in Holstein Steers

Directory of Open Access Journals (Sweden)

Min Yu Piao

2012-11-01

Full Text Available Three Holstein steers in the growing phase, each with a ruminal cannula, were used to test the hypothesis that the synchronization of the hourly rate of carbohydrate and nitrogen (N released in the rumen would increase the amount of retained nitrogen for growth and thus improve the efficiency of microbial protein synthesis (EMPS. In Experiment 1, in situ degradability coefficients of carbohydrate and N in feeds including Korean rice wine residue (RWR were determined. In Experiment 2, three total mixed ration (TMR diets having different rates of carbohydrate and N release in the rumen were formulated using the in situ degradability of the feeds. All diets were made to contain similar contents of crude protein (CP and neutral detergent fiber (NDF but varied in their hourly pattern of nutrient release. The synchrony index of the three TMRs was 0.51 (LS, 0.77 (MS and 0.95 (HS, respectively. The diets were fed at a restricted level (2% of the animal’s body weight in a 3×3 Latin-square design. Synchronizing the hourly supply of energy and N in the rumen did not significantly alter the digestibility of dry matter, organic matter, crude protein, NDF or acid detergent fiber (ADF (p>0.05. The ruminal NH3-N content of the LS group at three hours after feeding was significantly higher (p0.05. In addition, the purine derivative (PD excretion in urine and microbial-N production (MN among the three groups were not significantly different (p>0.05. In conclusion, synchronizing dietary energy and N supply to the rumen did not have a major effect on nutrient digestion or microbial protein synthesis (MPS in Holstein steers.

[Development of residual voltage testing equipment].

Science.gov (United States)

Zeng, Xiaohui; Wu, Mingjun; Cao, Li; He, Jinyi; Deng, Zhensheng

2014-07-01

For the existing measurement methods of residual voltage which can't turn the power off at peak voltage exactly and simultaneously display waveforms, a new residual voltage detection method is put forward in this paper. First, the zero point of the power supply is detected with zero cross detection circuit and is inputted to a single-chip microcomputer in the form of pulse signal. Secend, when the zero point delays to the peak voltage, the single-chip microcomputer sends control signal to power off the relay. At last, the waveform of the residual voltage is displayed on a principal computer or oscilloscope. The experimental results show that the device designed in this paper can turn the power off at peak voltage and is able to accurately display the voltage waveform immediately after power off and the standard deviation of the residual voltage is less than 0.2 V at exactly one second and later.

Cellulosic ethanol production from agricultural residues in Nigeria

International Nuclear Information System (INIS)

Iye, Edward; Bilsborrow, Paul

2013-01-01

Nigeria′s Biofuels Policy introduced in 2007 mandates a 10% blend (E10) of bioethanol with gasoline. This study investigates the potential for the development of a cellulosic ethanol industry based on the availability of agricultural residues and models the number of commercial processing facilities that could be sited in the six Geo-political zones. The potential for cellulosic ethanol production from agricultural residues in Nigeria is 7556 km 3 per annum exceeding the mandate of 10% renewable fuel required and providing the potential for 12 large- and 11 medium-scale processing facilities based on the use of a single feedstock. Cassava and yam peelings provided in excess of 80% of the process residues available with enough feedstock to supply 10 large-scale facilities with a fairly even distribution across the zones. Sorghum straw, millet straw and maize stalks represented 75% of the potential resource available from field residues with the potential to supply 2 large- and 7 medium-scale processing facilities, all of which would be located in the north of the country. When a multi-feedstock approach is used, this provides the potential for either 29 large- or 58 medium-scale facilities based on outputs of 250 and 125 km 3 per annum respectively. - Highlights: • Nigeria′s Biofuels Policy mandates a 10% blend of bioethanol with gasoline. • Total bioethanol production from agricultural residues was 7556 km 3 per annum. • Process residues offer the greatest potential accounting for 62% of production. • Nigeria has the potential for 12 large- and 11 medium scale commercial. • The use of mixed feedstocks significantly increases the potential for production

Agricultural Residues and Biomass Energy Crops

Energy Technology Data Exchange (ETDEWEB)

None

2016-06-01

There are many opportunities to leverage agricultural resources on existing lands without interfering with production of food, feed, fiber, or forest products. In the recently developed advanced biomass feedstock commercialization vision, estimates of potentially available biomass supply from agriculture are built upon the U.S. Department of Agriculture’s (USDA’s) Long-Term Forecast, ensuring that existing product demands are met before biomass crops are planted. Dedicated biomass energy crops and agricultural crop residues are abundant, diverse, and widely distributed across the United States. These potential biomass supplies can play an important role in a national biofuels commercialization strategy.

Urease activity as an index for assessing the maturity of cow manure and wheat residue vermicomposts.

Science.gov (United States)

Sudkolai, Saber Tayebi; Nourbakhsh, Farshid

2017-06-01

The establishment of a reliable index is an essential need to assess the degree of stability and maturity of solid wastes vermicomposts. The objective of this study was to investigate the effects of vermicomposting process on some chemical (pH, EC, OC, TN, lignin and C:N ratio) and biochemical properties of the cow manure (CM) and wheat residue (WR). Results demonstrated that during vermicomposting process of CM and WR urease activity was highly correlated with the time of vermicomposting (r=-0.97 ∗∗ for CM and r=-0.99 ∗∗ for WR), and well able to show the stability of organic waste. The urease activity showed significant correlations with the C:N ratio during the vermicomposting of CM and WR (r=0.89 ∗ and r=0.93 ∗∗ respectively) therefore it can be considered as a reliable indicator for determining the maturity and stability of organic wastes during vermicomposting process. Copyright © 2017. Published by Elsevier Ltd.

Estimating Swedish biomass energy supply

International Nuclear Information System (INIS)

Johansson, J.; Lundqvist, U.

1999-01-01

Biomass is suggested to supply an increasing amount of energy in Sweden. There have been several studies estimating the potential supply of biomass energy, including that of the Swedish Energy Commission in 1995. The Energy Commission based its estimates of biomass supply on five other analyses which presented a wide variation in estimated future supply, in large part due to differing assumptions regarding important factors. In this paper, these studies are assessed, and the estimated potential biomass energy supplies are discusses regarding prices, technical progress and energy policy. The supply of logging residues depends on the demand for wood products and is limited by ecological, technological, and economic restrictions. The supply of stemwood from early thinning for energy and of straw from cereal and oil seed production is mainly dependent upon economic considerations. One major factor for the supply of willow and reed canary grass is the size of arable land projected to be not needed for food and fodder production. Future supply of biomass energy depends on energy prices and technical progress, both of which are driven by energy policy priorities. Biomass energy has to compete with other energy sources as well as with alternative uses of biomass such as forest products and food production. Technical progress may decrease the costs of biomass energy and thus increase the competitiveness. Economic instruments, including carbon taxes and subsidies, and allocation of research and development resources, are driven by energy policy goals and can change the competitiveness of biomass energy

Groundwater potential for water supply during droughts in Korea

Science.gov (United States)

Hyun, Y.; Cha, E.; Moon, H. J.

2016-12-01

Droughts have been receiving much attention in Korea because severe droughts occurred in recent years, causing significant social, economic and environmental damages in some regions. Residents in agricultural area, most of all, were most damaged by droughts with lack of available water supplies to meet crop water demands. In order to mitigate drought damages, we present a strategy to keep from agricultural droughts by using groundwater to meet water supply as a potential water resource in agricultural areas. In this study, we analyze drought severity and the groundwater potential to mitigate social and environmental damages caused by droughts in Korea. We evaluate drought severity by analyzing spatial and temporal meteorological and hydrological data such as rainfall, water supply and demand. For drought severity, we use effective drought index along with the standardized precipitation index (SPI) and standardized runoff index(SRI). Water deficit during the drought period is also quantified to consider social and environmental impact of droughts. Then we assess the feasibility of using groundwater as a potential source for groundwater impact mitigation. Results show that the agricultural areas are more vulnerable to droughts and use of groundwater as an emergency water resource is feasible in some regions. For a case study, we select Jeong-Sun area located in Kangwon providence having well-developed Karst aquifers and surrounded by mountains. For Jeong-Sun area, we quantify groundwater potential use, design the method of water supply by using groundwater, and assess its economic benefit. Results show that water supply system with groundwater abstraction can be a good strategy when droughts are severe for an emergency water supply in Jeong-Sun area, and groundwater can also be used not only for a dry season water supply resource, but for everyday water supply system. This case study results can further be applicable to some regions with no sufficient water

Polylactide-based renewable green composites from agricultural residues and their hybrids.

Science.gov (United States)

Nyambo, Calistor; Mohanty, Amar K; Misra, Manjusri

2010-06-14

Agricultural natural fibers like jute, kenaf, sisal, flax, and industrial hemp have been extensively studied in green composites. The continuous supply of biofibers in high volumes to automotive part makers has raised concerns. Because extrusion followed by injection molding drastically reduces the aspect ratio of biofibers, the mechanical performance of injection molded agricultural residue and agricultural fiber-based composites are comparable. Here, the use of inexpensive agricultural residues and their hybrids that are 8-10 times cheaper than agricultural fibers is demonstrated to be a better way of getting sustainable materials with better performance. Green renewable composites from polylactide (PLA), agricultural residues (wheat straw, corn stover, soy stalks, and their hybrids) were successfully prepared through twin-screw extrusion, followed by injection molding. The effect on mechanical properties of varying the wheat straw amount from 10 to 40 wt % in PLA-wheat straw composites was studied. Tensile moduli were compared with theoretical calculations from the rule of mixture (ROM). Combination of agricultural residues as hybrids is proved to reduce the supply chain concerns for injection molded green composites. Densities of the green composites were found to be lower than those of conventional glass fiber composites.

Mechanisms affecting water quality in an intermittent piped water supply.

Science.gov (United States)

Kumpel, Emily; Nelson, Kara L

2014-01-01

Drinking water distribution systems throughout the world supply water intermittently, leaving pipes without pressure between supply cycles. Understanding the multiple mechanisms that affect contamination in these intermittent water supplies (IWS) can be used to develop strategies to improve water quality. To study these effects, we tested water quality in an IWS system with infrequent and short water delivery periods in Hubli-Dharwad, India. We continuously measured pressure and physicochemical parameters and periodically collected grab samples to test for total coliform and E. coli throughout supply cycles at 11 sites. When the supply was first turned on, water with elevated turbidity and high concentrations of indicator bacteria was flushed out of pipes. At low pressures (water was delivered with a chlorine residual and at pressures >17 psi.

Heating oil, distillates and residuals outlook

International Nuclear Information System (INIS)

Ervin, M.J.

2004-01-01

M.J. Ervin and Associates offers strategic planning support to the downstream petroleum industry in terms of price market monitoring, market analysis, media commentary and benchmarking of marketing operations. This presentation included graphs depicting supply and demand for heating oil distillates and residuals from the mid 1990s to 2004. It was noted that the long-term decline in residuals demand in the United States and Canada are due to environmental issues, the use of natural gas as an alternative, and the increasing complexity of refineries. Graphs depicting market impacts of refinery utilization and inventory trends showed that middle distillate production will increase at the expense of gasoline production. Middle distillates and gasoline markets will be more sensitive to supply disruptions, resulting in more frequent price spikes. Inventory trends indicate a greater reliance on product imports. The demand for heating fuel has stabilized due to the continued penetration of natural gas in eastern states and provinces. The demand for diesel fuel has growth 1.5 to 2 per cent while the demand for jet fuel has remained relatively flat and depends greatly on the growth of the gross national product (GNP). tabs., figs

Supply chain cost analysis of long-distance transportation of energy wood in Finland

International Nuclear Information System (INIS)

Tahvanainen, Timo; Anttila, Perttu

2011-01-01

The increasing use of bioenergy has resulted in a growing demand for long-distance transportation of energy wood. For both biofuels and traditional forest products, the importance of energy efficiency and rail use is growing. A GIS-based model for energy wood supply chains was created and used to simulate the costs for several supply chains in a study area in eastern Finland. Cost curves of ten supply chains for logging residues and full trees based on roadside, terminal and end-facility chipping were analyzed. The average procurement costs from forest to roadside storage were included. Railway transportation was compared to the most commonly used truck transportation options in long-distance transport. The potential for the development of supply chains was analyzed using a sensitivity analysis of 11 modified supply chain scenarios. For distances shorter than 60 km, truck transportation of loose residues and end-facility comminution was the most cost-competitive chain. Over longer distances, roadside chipping with chip truck transportation was the most cost-efficient option. When the transportation distance went from 135 to 165 km, depending on the fuel source, train-based transportation offered the lowest costs. The most cost-competitive alternative for long-distance transport included a combination of roadside chipping, truck transportation to the terminal and train transportation to the plant. Due to the low payload, the energy wood bundle chain with train transportation was not cost-competitive. Reduction of maximum truck weight increased the relative competitiveness of loose residue chains and train-based transportation, while reduction of fuel moisture increased competitiveness, especially of chip trucks.

Price control in contracts of heat supply. May no more index be used in automatic price escalator clauses?; Preiskontrolle in Waermeliefervertraegen.. Darf in automatischen Preisgleitklauseln kein Index mehr genutzt werden?

Energy Technology Data Exchange (ETDEWEB)

Legler, Dirk [Guenther Heidel Wollenteit Hack Goldmann, Hamburg (Germany)

2010-03-15

Automatic price escalator clauses using a price index are AGB legally permissible in heat supply contracts. The fact that such price indices necessarily compound and orient themselves only at its own development of delivery costs is so long innocuous since the selection of these indices essentially can be justified on the basis of objective criteria. However, if the heat supplier as a user of the AGB uses no indices, but passes its costs of acquisition in its price escalator clause simply to 100 %, this evenly can be inadmissible according to paragraph 24 sect. 3, sentence 1 of AVB district heating regulation. This is valid if such a 'servile' passing signifies a neglect of conditions on the market.

Volatility in GARCH Models of Business Tendency Index

Science.gov (United States)

Wahyuni, Dwi A. S.; Wage, Sutarman; Hartono, Ateng

2018-01-01

This paper aims to obtain a model of business tendency index by considering volatility factor. Volatility factor detected by ARCH (Autoregressive Conditional Heteroscedasticity). The ARCH checking was performed using the Lagrange multiplier test. The modeling is Generalized Autoregressive Conditional Heteroscedasticity (GARCH) are able to overcome volatility problems by incorporating past residual elements and residual variants.

The Effect of Crop Residue and Different NPK Fertilizer Rates on yield Components and Yield of Wheat

Directory of Open Access Journals (Sweden)

fatemeh khamadi

2017-08-01

Full Text Available Introduction Integrated nutrient management involving crop residue/green manures and chemical fertilizer is potential alternative to provide a balanced supply of nutrients, enhance soil quality and thereby sustain higher productivity. The present experiment was undertaken to evaluate the effect of different crop residue management practices and NPK levels on yield components and yield of wheat. Materials and methods Field experiments were conducted during 2012-2014 at department of agronomy, Chamran University. Experiment was laid out in a randomized block designs in split plot arrangement. With three replications. Crop residues were assigned to main plot consistent CR1: wheat residue; CR2: rape residue; CR3: barley residue; CR4: barley residue + vetch; CR5: wheat straw + mungbean; CR6: vetch residue; CR7: mungbean residue; CR8: No residue incorporation as main plot and three NPK fertilizer rates: F1: (180N-120P-100K kg.ha-1; F2: (140N-90P-80K kg.ha-1; F3: (90N-60P-40K kg.ha-1 as sub plots. Twelve hills were collected at physiological maturity for measuring yield components from surrounding area of grain yield harvest area. Yield components, viz. number of spike per m2, seed per spike, 1000- grain weight, plant height were measured. Grain and straw yields were recorded from the central 5 m2 grain yield harvest area of each treatment and harvest index was calculated. Data were subjected to analysis by SAS and mean companions were performed using the Duncan multiple range test producer. Also, graphs were drawn in Excel software. Results and discussion The result of analysis variance showed significant difference between crop residues for evaluated traits. The result indicated that the highest biological and grain yield was obtained when wheat treated with CR5: wheat straw + mungbean (green manure and CR4: barley straw + vetch (green manure. Biological and grain yield increased 31 and 26% respectively by CR5 comparing with control. The highest

Physicochemical and functional characteristics of residual pulp of potato

Directory of Open Access Journals (Sweden)

Webber Tavares de CARVALHO

Full Text Available Abstract Starch-rich liquid effluent is generated after peeling, cutting and washing of tubers during the fries processing. After sedimentation of this effluent is recovered a wet residual pulp, and after drying is obtained dry residual pulp or simply named in this study residual pulp of potato (RPP. In order to convert the effluent into a material easy to store for long periods (such as the potato starch, which would make it suitable for various applications. The aim of this study was to evaluate the effect of the drying conditions, specifically variables temperature and air flow on the drying time and water activity, pH, titratable acidity, instrumental colour parameters, water absorption index, water solubility index and oil absorption capacity of dry RPP. Central Composite Design was used, with temperature levels from 50.0 to 70.0 °C and air flow from 0.06 to 0.092 m3 m–2 s–1. Temperature and airflow affected the study characteristics, except for lightness (L*, water solubility index and oil absorption capacity. It was concluded that milder conditions (lower temperatures and intermediate air flow resulted in higher-quality final products (lighter, less acidic, although requiring higher drying time. Therefore, depending on the product application, different drying conditions can be used.

Biomass supply chain optimisation for Organosolv-based biorefineries.

Science.gov (United States)

Giarola, Sara; Patel, Mayank; Shah, Nilay

2014-05-01

This work aims at providing a Mixed Integer Linear Programming modelling framework to help define planning strategies for the development of sustainable biorefineries. The up-scaling of an Organosolv biorefinery was addressed via optimisation of the whole system economics. Three real world case studies were addressed to show the high-level flexibility and wide applicability of the tool to model different biomass typologies (i.e. forest fellings, cereal residues and energy crops) and supply strategies. Model outcomes have revealed how supply chain optimisation techniques could help shed light on the development of sustainable biorefineries. Feedstock quality, quantity, temporal and geographical availability are crucial to determine biorefinery location and the cost-efficient way to supply the feedstock to the plant. Storage costs are relevant for biorefineries based on cereal stubble, while wood supply chains present dominant pretreatment operations costs. Copyright © 2014 Elsevier Ltd. All rights reserved.

Partner Selection Optimization Model of Agricultural Enterprises in Supply Chain

OpenAIRE

Feipeng Guo; Qibei Lu

2013-01-01

With more and more importance of correctly selecting partners in supply chain of agricultural enterprises, a large number of partner evaluation techniques are widely used in the field of agricultural science research. This study established a partner selection model to optimize the issue of agricultural supply chain partner selection. Firstly, it constructed a comprehensive evaluation index system after analyzing the real characteristics of agricultural supply chain. Secondly, a heuristic met...

Understanding forest-derived biomass supply with GIS modelling

DEFF Research Database (Denmark)

Hock, B. K.; Blomqvist, L.; Hall, P.

2012-01-01

distribution, and the cost of delivery as forests are frequently remote from energy users. A GIS-based model was developed to predict supply curves of forest biomass material for a site or group of sites, both now and in the future. The GIS biomass supply model was used to assist the New Zealand Energy...... Efficiency and Conservation Authority's development of a national target for biomass use for industrial heat production, to determine potential forest residue volumes for industrial heat and their delivery costs for 19 processing plants of the dairy company Fonterra, and towards investigating options...

Evaluating Economic Alternatives for Wood Energy Supply Based on Stochastic Simulation

Directory of Open Access Journals (Sweden)

Ulises Flores Hernández

2018-04-01

Full Text Available Productive forests, as a major source of biomass, represent an important pre-requisite for the development of a bio-economy. In this respect, assessments of biomass availability, efficiency of forest management, forest operations, and economic feasibility are essential. This is certainly the case for Mexico, a country with an increasing energy demand and a considerable potential for sustainable forest utilization. Hence, this paper focuses on analyzing economic alternatives for the Mexican bioenergy supply based on the costs and revenues of utilizing woody biomass residues. With a regional spatial approach, harvesting and transportation costs of utilizing selected biomass residues were stochastically calculated using Monte Carlo simulations. A sensitivity analysis of percentage variation of the most probable estimate in relation to the parameters price and cost for one alternative using net future analysis was conducted. Based on the results for the northern region, a 10% reduction of the transportation cost would reduce overall supply cost, resulting in a total revenue of 13.69 USD/m3 and 0.75 USD/m3 for harvesting residues and non-extracted stand residues, respectively. For the central south region, it is estimated that a contribution of 16.53 USD/m3 from 2013 and a total revenue of 33.00 USD/m3 in 2030 from sawmill residues will improve the value chain. The given approach and outputs provide the basis for the decision-making process regarding forest utilization towards energy generation based on economic indicators.

Index to Doctoral Dissertations in Business Education 1900-1975.

Science.gov (United States)

Rahe, Harves

The cross-referenced index to doctoral dissertations in business education is based on listings and summaries of doctoral studies as they appeared in the major publications in the field of business education for the last 75 years. The index is divided into four parts: (1) a researcher/author index (76 pages) supplying typical bibliographic data…

Water quality effects of intermittent water supply in Arraiján, Panama.

Science.gov (United States)

Erickson, John J; Smith, Charlotte D; Goodridge, Amador; Nelson, Kara L

2017-05-01

Intermittent drinking water supply is common in low- and middle-income countries throughout the world and can cause water quality to degrade in the distribution system. In this study, we characterized water quality in one study zone with continuous supply and three zones with intermittent supply in the drinking water distribution network in Arraiján, Panama. Low or zero pressures occurred in all zones, and negative pressures occurred in the continuous zone and two of the intermittent zones. Despite hydraulic conditions that created risks for backflow and contaminant intrusion, only four of 423 (0.9%) grab samples collected at random times were positive for total coliform bacteria and only one was positive for E. coli. Only nine of 496 (1.8%) samples had turbidity >1.0 NTU and all samples had ≥0.2 mg/L free chlorine residual. In contrast, water quality was often degraded during the first-flush period (when supply first returned after an outage). Still, routine and first-flush water quality under intermittent supply was much better in Arraiján than that reported in a previous study conducted in India. Better water quality in Arraiján could be due to better water quality leaving the treatment plant, shorter supply outages, higher supply pressures, a more consistent and higher chlorine residual, and fewer contaminant sources near pipes. The results illustrate that intermittent supply and its effects on water quality can vary greatly between and within distribution networks. The study also demonstrated that monitoring techniques designed specifically for intermittent supply, such as continuous pressure monitoring and sampling the first flush, can detect water quality threats and degradation that would not likely be detected with conventional monitoring. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Security of Energy Supply and the Contribution of Nuclear Energy

International Nuclear Information System (INIS)

2011-01-01

What contribution can nuclear energy make to improve the security of energy supply? This study, which examines a selection of OECD member countries, qualitatively and quantitatively validates the often intuitive assumption that, as a largely domestic source of electricity with stable costs and no greenhouse gas emissions during production, nuclear energy can make a positive contribution. Following an analysis of the meaning and context of security of supply, the study uses transparent and policy-relevant indicators to show that, together with improvements in energy efficiency, nuclear energy has indeed contributed significantly to enhanced energy supply security in OECD countries over the past 40 years. Content: Foreword; Executive Summary; 1. The Security of Energy Supply and the Contribution of Nuclear Energy - Concepts and Issues: - Energy supply security: An introduction, - Why security of energy supply remains a policy issue in OECD countries, - The external dimension: import dependence, resource exhaustion and carbon policy, - The internal dimension: economic, financial and technical considerations for energy supply security - Orientations for government policies to enhance the security of energy supply, - Conclusions; 2. Indicators and Models for Measuring Security of Energy Supply Risks: - Introduction, - Different approaches towards designing the Supply/Demand Index, - A detailed review of selected security of supply indicators, - Comprehensive models for assessing the security of energy supply, - The Supply/Demand Index, - Concluding observations; 3. Evolution of the Security of Energy Supply in OECD Countries: - Time-dependent quantification of the security of energy supply, - Changes in security of supply in selected OECD countries, - Electricity generation and the security of energy supply, - The contribution of nuclear energy and energy intensity to the security of energy supply, - The geographical distribution of SSDI values, - Conclusions; 4. Public

Long term trends in world energy demand and supply

International Nuclear Information System (INIS)

Frisch, J.

1992-01-01

In this address, the author discusses projected changes in fuel use, shifts in energy consumption and projected increases in carbon dioxide emissions. He expects these energy issues to cause geopolitical uncertainties that will complicate attempts to reduce greenhouse gases. There is great concern for the poverty-stricken areas of Asia and Africa. Thirty-five to forty-five percent of their energy needs will be supplied by scarce fuelwood and poor animal and vegetal residues by the year 2020. International cooperation will be needed to alleviate the tensions caused by these inequities of energy supplies

Characterizing ecosystem response to water supply changes inferred from GRACE drought severity index and surface soil moisture anomalies from ESA CCI and SMAP

Science.gov (United States)

Zhao, M.; Velicogna, I.; Kimball, J. S.

2017-12-01

Climate change such as more frequent heatwaves and drought is threatening our food security and ecosystem by reducing water supply to vegetation. Characterizing vegetation response to water supply changes is not only important for evaluating and mitigating climatic change impacts on ecosystem functions and services, but also to determine the feedback mechanisms that ecosystem response may generate on the climate itself. However, such characterization is not well-known at the global scale partly because large scale observations of underground water supply changes are limited. Satellite observations of soil moisture (SM) datasets such as from Soil Moisture Active and Passive (SMAP) and European Space Agency Climate Change Initiative (ESA CCI) do not penetrate more than a few centimeters and do not capture the entire root-zone. Here we employ a newly developed Drought Severity Index from Gravity Recovery and Climate Experiment (GRACE-DSI) to complement SM observations by informing total water supply changes in the entire terrestrial hydrological cycle. We use MODIS vegetation indices as proxies for vegetation growth and investigate their seasonal and interannual variability in relation to GRACE-DSI. We find that total water supply constrains vegetation growth across the entire continental US. Water constraint begins at an earlier date of year and lasts for a longer period in the lower latitude than in the higher latitude. We also find that water constraint occurs at different phenological stages depending on vegetation type. For instance, water constrain forest growth during reproductive period in eastern US but constrain shrub land growth during green-up in Arizona (Fig. 1). In western United States, eastern Australia and the horn of Africa, we find that vegetation growth changes closely follows GRACE-DSI but can have 16-day to one-month delay with respect to SM anomalies from SMAP and ESA CCI. This suggests that in these regions, vegetation is sensitive to water

Petroleum supply annual 1996: Volume 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-06-01

The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1996 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Capacity; each with final annual data. The summary statistics section show 16 years of data depicting the balance between supply, disposition and ending stocks for various commodities including crude oil, motor gasoline, distillate fuel oil, residual fuel oil, jet fuel propane/propylene, and liquefied petroleum gases. The detailed statistics section provide 1996 detailed statistics on supply and disposition, refinery operations, imports and exports, stocks, and transportation of crude oil and petroleum products. The refinery capacity contain listings of refineries and associated crude oil distillation and downstream capacities by State, as of January 1, 1997, as well as summaries of corporate refinery capacities and refinery storage capacities. In addition, refinery receipts of crude oil by method of transportation for 1996 are provided. Also included are fuels consumed at refineries, and lists of shutdowns, sales, reactivations, and mergers during 1995 and 1996. 16 figs., 59 tabs.

Petroleum supply annual 1996: Volume 1

International Nuclear Information System (INIS)

1997-06-01

The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1996 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Capacity; each with final annual data. The summary statistics section show 16 years of data depicting the balance between supply, disposition and ending stocks for various commodities including crude oil, motor gasoline, distillate fuel oil, residual fuel oil, jet fuel propane/propylene, and liquefied petroleum gases. The detailed statistics section provide 1996 detailed statistics on supply and disposition, refinery operations, imports and exports, stocks, and transportation of crude oil and petroleum products. The refinery capacity contain listings of refineries and associated crude oil distillation and downstream capacities by State, as of January 1, 1997, as well as summaries of corporate refinery capacities and refinery storage capacities. In addition, refinery receipts of crude oil by method of transportation for 1996 are provided. Also included are fuels consumed at refineries, and lists of shutdowns, sales, reactivations, and mergers during 1995 and 1996. 16 figs., 59 tabs

The Political Economy of the Munitions Supply Program

Science.gov (United States)

2014-05-01

advantage in production, and further identified which munitions products can be procured offshore with only limited effects on operational liabilities...comparative advantage and access to global supply chains. A few options exist: fixed-price contracts may be indexed to exogenously-given input prices and... franchisees bid their true costs.47 Third, once supply is forthcoming, the franchisee has an incentive to minimize costs unless the franchiser is known

Modern bioenergy from agricultural and forestry residues in Cameroon: Potential, challenges and the way forward

DEFF Research Database (Denmark)

Ackom, Emmanuel; Alemagi, Dieudonne; Ackom, Nana B.

2013-01-01

liters of ethanol annually to displace 18–48% of the national consumption of gasoline. Alternatively, the residues could provide 0.08–0.22 billion liters of biomass to Fischer Tropsch diesel annually to offset 17–45% of diesel fuel use. For the generation of bioelectricity, the residues could supply 0...

Remote Sensing of Residue Management in Farms using Landsat 8 Sensor Imagery

Directory of Open Access Journals (Sweden)

M. A Rostami

2017-10-01

Full Text Available Introduction Preserving of crop residues in the field surface after harvesting crops, making difficult farm operations. The farmers for getting rid of crop residues always choose the easiest way, i.e. burning. Burning is one of the common disposal methods for wheat and corn straw in some region of the world. Present study was aimed to investigate the accurate methods for monitoring of residue management after wheat harvesting. With this vision, the potential of Landsat 8 sensor was evaluated for monitoring of residue burning, using satellite spectral indices and Linear Spectral Unmixing Analysis. For this purpose, correlation of ground data with satellite spectral indices and LSUA data were tested by linear regression. Materials and Methods In this study we considered 12 farms where remained plants were burned, 12 green farm, 12 bare farms and 12 farms with full crop residue cover were considered. Spatial coordinates of experimental fields recorded with a GPS and fields map were drawn using ArcGissoftware, version of 10.1. In this study,t wo methods were used to separate burned fields from other farms including Satellite Spectral Indices and Linear Spectral unmixing analysis. In this study, multispectral landsat 8 image was acquired over 2015 year. Landsat 8 products are delivered to the customer as radiometric, sensor, and geometric corrections. Image pixels are unique to Landsat 8 data, and should not be directly compared to imagery from other sensors. Therefore, DN value must be converted to radiance value in order to change the radiance to the reflectance, which is useful when performing spectral analysis techniques, such as transformations, band ratios and the Normalized Difference Vegetation Index (NDVI, etc. In this study, a number of spectral indices and Linear Spectral Unmixing Analysis data were imported/extracted from Landsat 8 image. All satellite image data were analyzed by ENVI software package. The spectral indices used in this

Designing the Reverse Supply Chain

DEFF Research Database (Denmark)

Gobbi, Chiara

2011-01-01

Purpose – The purpose of this paper is to explore the impact of the product residual value (PRV) and the loss of value over time of returned products in the reverse supply chain configuration. It also examines whether or not the distinction of Fisher's functional and innovative products holds...... that allows for recapturing most of the PRV. These notions have then been tested by analyzing two reverse supply chains with a case study research methodology. Findings – The findings show that low PRV is associated with second-class recovery options (recycling and energy recovery) and that high PRV...... is associated with first-class recovery options (reconditioning and remarketing). When the recovery option is recycling, time is not relevant, the primary objective is cost reduction (efficiency), the chain is centralized, and actors and phases of the reverse chain are determined by the specificity...

Audit report on GDF Suez's supply costs and non-supply related costs in natural gas regulated sale tariffs - May 2014

International Nuclear Information System (INIS)

2014-05-01

After having recalled the legal context of objectives of this audit performed by the French Commission for Energy Regulation (CRE), this report proposes an analysis of GDF Suez's dissociated accounting which showed that costs are covered by natural gas regulated sale tariffs. In the second part, it comments the current market indexing used in tariff formula, comments current and present negotiations and their consequences for the market indexing share in long term contracts, discusses the issue of tariff volatility related to an increased market indexing share, discusses the possible re-examination of indices at the occasion of formula reviewing, and outlines that the diversified supplier portfolio allows optimisation operations. The third part addresses non-supply related costs: evolution of different infrastructure costs (related to distribution, transport, and storage) to be taken into account in regulated sale tariffs, evolution of commercial costs. Some recommendations are then made regarding the perspective of a tariff formula revision, and the perspectives of evolution of non-supply related costs

Nuclear reactor with makeup water assist from residual heat removal system

International Nuclear Information System (INIS)

Schulz, T.L.; Corletti, M.M.

1994-01-01

A pressurized water nuclear reactor uses its residual heat removal system to make up water in the reactor coolant circuit by pumping water from an in-containment refueling water storage tank during staged depressurization of the coolant circuit, the final stage including passive emergency cooling by gravity feed from the refueling water storage tank to the coolant circuit and to flood the containment building. When depressurization commences due to inadvertence or a manageable leak, the residual heat removal system is activated manually and avoids the final stage of depressurization with its flooding of the containment when such action is not necessary, but does not prevent the final stage when it is necessary. A high pressure makeup water storage tank coupled to the reactor coolant circuit holds makeup coolant at the operational pressure of the reactor. The staged depressurization system vents the coolant circuit to the containment, thus reducing the supply of makeup coolant. The level of makeup coolant can be sensed to trigger opening of successive depressurization conduits. The residual heat removal system can also be coupled in a loop with the refueling water supply tanks for cooling the tank. (Author)

Tactical supply chain planning for a forest biomass power plant under supply uncertainty

International Nuclear Information System (INIS)

Shabani, Nazanin; Sowlati, Taraneh; Ouhimmou, Mustapha; Rönnqvist, Mikael

2014-01-01

Uncertainty in biomass supply is a critical issue that needs to be considered in the production planning of bioenergy plants. Incorporating uncertainty in supply chain planning models provides improved and stable solutions. In this paper, we first reformulate a previously developed non-linear programming model for optimization of a forest biomass power plant supply chain into a linear programming model. The developed model is a multi-period tactical-level production planning problem and considers the supply and storage of forest biomass as well as the production of electricity. It has a one-year planning horizon with monthly time steps. Next, in order to incorporate uncertainty in monthly available biomass into the planning, we develop a two-stage stochastic programming model. Finally, to balance the risk and profit, we propose a bi-objective model. The results show that uncertainty in availability of biomass has an additional cost of $0.4 million for the power plant. Using the proposed stochastic optimization model could reduce this cost by half. - Highlights: • Developed a two-stage stochastic optimization model to consider supply uncertainty. • Maximized the profit of a forest biomass power plant value chain. • Minimized two risk measures, variability index and downside risk, to manage risks. • Stochastic optimization model provided feasible solution for all scenarios. • Results showed a trade-off between profit and risk management

Quantifying the Impact of Feedstock Quality on the Design of Bioenergy Supply Chain Networks

Directory of Open Access Journals (Sweden)

Krystel K. Castillo-Villar

2016-03-01

Full Text Available Logging residues, which refer to the unused portions of trees cut during logging, are important sources of biomass for the emerging biofuel industry and are critical feedstocks for the first-type biofuel facilities (e.g., corn-ethanol facilities. Logging residues are under-utilized sources of biomass for energetic purposes. To support the scaling-up of the bioenergy industry, it is essential to design cost-effective biofuel supply chains that not only minimize costs, but also consider the biomass quality characteristics. The biomass quality is heavily dependent upon the moisture and the ash contents. Ignoring the biomass quality characteristics and its intrinsic costs may yield substantial economic losses that will only be discovered after operations at a biorefinery have begun. This paper proposes a novel bioenergy supply chain network design model that minimizes operational costs and includes the biomass quality-related costs. The proposed model is unique in the sense that it supports decisions where quality is not unrealistically assumed to be perfect. The effectiveness of the proposed methodology is proven by assessing a case study in the state of Tennessee, USA. The results demonstrate that the ash and moisture contents of logging residues affect the performance of the supply chain (in monetary terms. Higher-than-target moisture and ash contents incur in additional quality-related costs. The quality-related costs in the optimal solution (with final ash content of 1% and final moisture of 50% account for 27% of overall supply chain cost. Based on the numeral experimentation, the total supply chain cost increased 7%, on average, for each additional percent in the final ash content.

Measuring the security of external energy supply in the European Union

DEFF Research Database (Denmark)

Le Coq, Chloe; Paltseva, Elena

2009-01-01

The security of energy supply is one of the main objectives of EU energy policy. In this paper, we introduce an index designed to evaluate the short-term risks associated with the external supply of energy to the EU Member States. It combines measures of energy import diversification, political...

Comparison of residual strength-grounding damage index diagrams for tankers produced by the ALPS/HULL ISFEM and design formula method

Directory of Open Access Journals (Sweden)

Do Kyun Kim

2013-03-01

Full Text Available This study compares the Residual ultimate longitudinal strength – grounding Damage index (R-D diagrams produced by two analysis methods: the ALPS/HULL Intelligent Supersize Finite Element Method (ISFEM and the design formula (modified Paik and Mansour method – used to assess the safety of damaged ships. The comparison includes four types of double-hull oil tankers: Panamax, Aframax, Suezmax and VLCC. The R-D diagrams were calculated for a series of 50 grounding scenarios. The diagrams were efficiently sampled using the Latin Hypercube Sampling (LHS technique and comprehensively analysed based on ship size. Finally, the two methods were compared by statistically analysing the differences between their grounding damage indices and ultimate longitudinal strength predictions. The findings provide a useful example of how to apply the ultimate longitudinal strength analysis method to grounded ships.

Effects of magnetic core geometry on false detection in residual current sensor

International Nuclear Information System (INIS)

Colin, Bruno; Chillet, Christian; Kedous-Lebouc, Afef; Mas, Patrick

2006-01-01

Under high-supply current, residual circuit breakers are subject to abnormal tripping, caused by false residual currents. Geometric or magnetic anomalies in the circuit breaker ring core seem to be responsible for these abnormal currents. This paper studies a few anomalies (spiral shape effect, conductor eccentricity, lamination effect) and calculates different contributions using the finite element simulations. The results show that the ring core, made of thin wound magnetic tape, is particularly sensitive to primary conductor eccentricity

A quantitative metric to identify critical elements within seafood supply networks.

Directory of Open Access Journals (Sweden)

Éva E Plagányi

Full Text Available A theoretical basis is required for comparing key features and critical elements in wild fisheries and aquaculture supply chains under a changing climate. Here we develop a new quantitative metric that is analogous to indices used to analyse food-webs and identify key species. The Supply Chain Index (SCI identifies critical elements as those elements with large throughput rates, as well as greater connectivity. The sum of the scores for a supply chain provides a single metric that roughly captures both the resilience and connectedness of a supply chain. Standardised scores can facilitate cross-comparisons both under current conditions as well as under a changing climate. Identification of key elements along the supply chain may assist in informing adaptation strategies to reduce anticipated future risks posed by climate change. The SCI also provides information on the relative stability of different supply chains based on whether there is a fairly even spread in the individual scores of the top few key elements, compared with a more critical dependence on a few key individual supply chain elements. We use as a case study the Australian southern rock lobster Jasus edwardsii fishery, which is challenged by a number of climate change drivers such as impacts on recruitment and growth due to changes in large-scale and local oceanographic features. The SCI identifies airports, processors and Chinese consumers as the key elements in the lobster supply chain that merit attention to enhance stability and potentially enable growth. We also apply the index to an additional four real-world Australian commercial fishery and two aquaculture industry supply chains to highlight the utility of a systematic method for describing supply chains. Overall, our simple methodological approach to empirically-based supply chain research provides an objective method for comparing the resilience of supply chains and highlighting components that may be critical.

A Quantitative Metric to Identify Critical Elements within Seafood Supply Networks

Science.gov (United States)

Plagányi, Éva E.; van Putten, Ingrid; Thébaud, Olivier; Hobday, Alistair J.; Innes, James; Lim-Camacho, Lilly; Norman-López, Ana; Bustamante, Rodrigo H.; Farmery, Anna; Fleming, Aysha; Frusher, Stewart; Green, Bridget; Hoshino, Eriko; Jennings, Sarah; Pecl, Gretta; Pascoe, Sean; Schrobback, Peggy; Thomas, Linda

2014-01-01

A theoretical basis is required for comparing key features and critical elements in wild fisheries and aquaculture supply chains under a changing climate. Here we develop a new quantitative metric that is analogous to indices used to analyse food-webs and identify key species. The Supply Chain Index (SCI) identifies critical elements as those elements with large throughput rates, as well as greater connectivity. The sum of the scores for a supply chain provides a single metric that roughly captures both the resilience and connectedness of a supply chain. Standardised scores can facilitate cross-comparisons both under current conditions as well as under a changing climate. Identification of key elements along the supply chain may assist in informing adaptation strategies to reduce anticipated future risks posed by climate change. The SCI also provides information on the relative stability of different supply chains based on whether there is a fairly even spread in the individual scores of the top few key elements, compared with a more critical dependence on a few key individual supply chain elements. We use as a case study the Australian southern rock lobster Jasus edwardsii fishery, which is challenged by a number of climate change drivers such as impacts on recruitment and growth due to changes in large-scale and local oceanographic features. The SCI identifies airports, processors and Chinese consumers as the key elements in the lobster supply chain that merit attention to enhance stability and potentially enable growth. We also apply the index to an additional four real-world Australian commercial fishery and two aquaculture industry supply chains to highlight the utility of a systematic method for describing supply chains. Overall, our simple methodological approach to empirically-based supply chain research provides an objective method for comparing the resilience of supply chains and highlighting components that may be critical. PMID:24633147

A quantitative metric to identify critical elements within seafood supply networks.

Science.gov (United States)

Plagányi, Éva E; van Putten, Ingrid; Thébaud, Olivier; Hobday, Alistair J; Innes, James; Lim-Camacho, Lilly; Norman-López, Ana; Bustamante, Rodrigo H; Farmery, Anna; Fleming, Aysha; Frusher, Stewart; Green, Bridget; Hoshino, Eriko; Jennings, Sarah; Pecl, Gretta; Pascoe, Sean; Schrobback, Peggy; Thomas, Linda

2014-01-01

A theoretical basis is required for comparing key features and critical elements in wild fisheries and aquaculture supply chains under a changing climate. Here we develop a new quantitative metric that is analogous to indices used to analyse food-webs and identify key species. The Supply Chain Index (SCI) identifies critical elements as those elements with large throughput rates, as well as greater connectivity. The sum of the scores for a supply chain provides a single metric that roughly captures both the resilience and connectedness of a supply chain. Standardised scores can facilitate cross-comparisons both under current conditions as well as under a changing climate. Identification of key elements along the supply chain may assist in informing adaptation strategies to reduce anticipated future risks posed by climate change. The SCI also provides information on the relative stability of different supply chains based on whether there is a fairly even spread in the individual scores of the top few key elements, compared with a more critical dependence on a few key individual supply chain elements. We use as a case study the Australian southern rock lobster Jasus edwardsii fishery, which is challenged by a number of climate change drivers such as impacts on recruitment and growth due to changes in large-scale and local oceanographic features. The SCI identifies airports, processors and Chinese consumers as the key elements in the lobster supply chain that merit attention to enhance stability and potentially enable growth. We also apply the index to an additional four real-world Australian commercial fishery and two aquaculture industry supply chains to highlight the utility of a systematic method for describing supply chains. Overall, our simple methodological approach to empirically-based supply chain research provides an objective method for comparing the resilience of supply chains and highlighting components that may be critical.

Amount, availability, and potential use of rice straw (agricultural residue) biomass as an energy resource in Japan

International Nuclear Information System (INIS)

Matsumura, Yukihiko; Minowa, Tomoaki; Yamamoto, Hiromi

2005-01-01

This paper discusses the use of agricultural residue in Japan as an energy resource, based on the amounts produced and availability. The main agricultural residues in Japan are rice straw and rice husk. Based on a scenario wherein these residues are collected as is the rice product, we evaluate the size, cost, and CO 2 emission for power generation. Rice residue has a production potential of 12 Mt-dry year -1 , and 1.7 kt of rice straw is collected for each storage location. As this is too small an amount even for the smallest scale of power plant available, 2-month operation per year is assumed. Assuming a steam boiler and turbine with an efficiency of 7%, power generation from rice straw biomass can supply 3.8 billion(kW)h of electricity per year, or 0.47% of the total electricity demand in Japan. The electricity generated from this source costs as much as 25 JPY (kW h) -1 (0.21 US$ (kW h) -1 , 1 US$=120 JPY), more than double the current price of electricity. With heat recovery at 80% efficiency, the simultaneous heat supplied via cogeneration reaches 10% of that supplied by heavy oil in Japan. Further cost incentives will be required if the rice residue utilization is to be introduced. It will also be important to develop effective technologies to achieve high efficiency even in small-scale processes. If Japanese technologies enable the effective use of agricultural residue abroad as a result of Japanese effort from the years after 2010, the resulting reduction of greenhouse gas emission can be counted under the framework of the Kyoto Protocol

Multi-perspective analysis of China's energy supply security

International Nuclear Information System (INIS)

Geng, Jiang-Bo; Ji, Qiang

2014-01-01

China's energy supply security has faced many challenges such as the drastic change of the international energy environment and the domestic energy situation and so on. This paper constructs a multi-dimensional indicator system for the main risks deriving from four aspects to evaluate the situation of China's energy supply security and analyze its evolution characteristics from 1994 to 2011. The results indicate that the situation of China's energy supply security generally presented a downtrend during 1994–2008, as a result of increasing international energy market monopoly and high volatility of international crude oil prices. After 2008, the overall level of China's energy supply security has improved to the level of 2003, which is attributed to the relatively stable international energy environment as well as the effective implementation of energy policies. - Highlights: • A multi-dimensional index system for energy supply security is constructed. • The dynamic influences of external and internal risks are analyzed. • China's energy supply security presents a downward trend during 1994–2008. • The level of China's energy supply security has improved since 2009

An adjoint method of sensitivity analysis for residual vibrations of structures subject to impacts

Science.gov (United States)

Yan, Kun; Cheng, Gengdong

2018-03-01

For structures subject to impact loads, the residual vibration reduction is more and more important as the machines become faster and lighter. An efficient sensitivity analysis of residual vibration with respect to structural or operational parameters is indispensable for using a gradient based optimization algorithm, which reduces the residual vibration in either active or passive way. In this paper, an integrated quadratic performance index is used as the measure of the residual vibration, since it globally measures the residual vibration response and its calculation can be simplified greatly with Lyapunov equation. Several sensitivity analysis approaches for performance index were developed based on the assumption that the initial excitations of residual vibration were given and independent of structural design. Since the resulting excitations by the impact load often depend on structural design, this paper aims to propose a new efficient sensitivity analysis method for residual vibration of structures subject to impacts to consider the dependence. The new method is developed by combining two existing methods and using adjoint variable approach. Three numerical examples are carried out and demonstrate the accuracy of the proposed method. The numerical results show that the dependence of initial excitations on structural design variables may strongly affects the accuracy of sensitivities.

Liquefied Residue of Kenaf Core Wood Produced at Different Phenol-Kenaf Ratio

International Nuclear Information System (INIS)

Saiful Bahari Bakarudin; Sarani Zakaria; Chia, C.H.; Jani, S.M.

2012-01-01

Liquefactions of kenaf core wood were carried out at different phenol-kenaf (P/ k) ratios. Characterizations of kenaf core wood liquefied residue were carried out to measure the degree of liquefaction. This provides a new approach to understand some fundamental aspects of the liquefaction reaction. Functional groups on the raw kenaf core wood and liquefied residue were examined using Fourier transform infrared spectroscopy (FTIR). The crystallinity index of the kenaf wood liquefied residue, which represents crystallinity changes of the cellulose component after the liquefaction process, was studied using X-ray diffraction (XRD). The surface morphology of the wood residue was observed using scanning electron microscopy (SEM). The thermal behavior of the residues was analyzed using thermogravimetric analysis (TGA). Abroad peak around 3450-3400 cm -1 representing OH stretching in lignin start to disappear as P/K ratio increases. The results showed that the higher the P/K ratio the greater the liquefaction of the lignin component in the kenaf core wood. The crystallinity index (CrI) on the kenaf liquefied residues increased with the increase in P/K ratio. SEM images showed that the small fragments attached on the liquefied kenaf residue surface were gradually removed as the P/K ratio was increased from 1.5/ 1.0 to 2.5/ 1.0, which is mainly attributed to the greater chemical penetration toward reactive site of the kenaf fibres. Residue content decreased as the P/K ratio increased from 1.5/ 1.0 to 2.5/ 1.0. TGA results showed the increase of heat resistance in the residue as the P/K ratio was increased. (author)

Conditioning of radioactive ash residue in a wave of solid-phase exothermal reactions

International Nuclear Information System (INIS)

Karlina, O.K.; Varlakova, G.A.; Ozhovan, M.I.; Tivanskij, V.M.; Dmitriev, S.A.

2001-01-01

The abilities for utilization of exothermic reaction heat in solid phase for conditioning the ash residue produced as a result of solid radioactive waste burning are analyzed. It is shown that the process of ash residue making monolithic with obtaining the glass-like finish product containing 50-60 mass % of ash residue which meets the requirements for solidified radioactive wastes may be realized without energy supplying from external heat sources. The conditioning is realized in a special crucible furnace-container designed not only for the process conducting but also for subsequent storage or disposal of the finish product [ru

Development of irradiation technique on degradation residue of pesticide veterinary drugs and mycotoxins in food

International Nuclear Information System (INIS)

He Jiang; Huang Min; Chen Hao; Wu Ling; Gao Peng; Wang Yan; Lei Qing

2011-01-01

Irradiation technology is a new processing technology, It was widely used in food, medicines and medical supplies, chemical and other industries. In this paper, illustrated their applications in the degradation of pesticides, veterinary drugs and mycotoxins aspects residual pollution in food. Analysis of residual contaminants in food irradiation control study limitations and look forward to the prospect of food irradiation technology. (authors)

Colombian equity return and narrow money supply: an asymmetric cointegration analysis

OpenAIRE

Chu V. Nguyen

2012-01-01

The asymmetric, cointegrating relationship between the return on equity market and the narrowly defined money supply is documented. In fact, equity return and the monthly percentage change in the Colombian money supply M1 spread adjusts to the threshold value slower when a contractionary countercyclical policy action or an economic shock causes the money supply M1 to fall relative to the share price index, widening their spread, than when an expansionary countercyclical monetary policy action...

Proceedings of the 8. biennial residual wood conference

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

This conference highlighted practical strategies for managing and utilizing residual wood as a true industry resource. Examples of successful wood energy projects were presented along with the technology and products of more than 30 companies involved in the residual wood business. The topics of discussion ranged from biomass supplies, quality issues, and harvesting guidelines to emerging biomass technologies, project overviews, and financing. The presentations outlined the many opportunities that exist for the forest industry to produce energy from biostock, such as healthy and diseased trees, underbrush, sawdust, wood chips, wood pulp and black liquor. Increasing fuel and energy costs along with advances in technology are improving the economy of forest-based biorefineries. The presentations showed how the industry can gain revenue from residual wood, which is steadily becoming a more valuable resource for pellet production and energy generation The conference featured 20 presentations, of which 3 have been catalogued separately for inclusion in this database. refs., tabs., figs.

Development of a water quality index based on a European ...

African Journals Online (AJOL)

This index has advantages over pre-existing indices by reflecting the appropriateness of water for specific use, e.g. drinking water supply rather than general supply, and has been developed by studying the supranational standard, i.e. the European Community Standard. Three classification schemes for water quality are ...

Determination of Effective Criteria for location Selection of WPC Plants from agricultural residues in Iran by AHP Technique

Directory of Open Access Journals (Sweden)

hasan alizadeh

2017-02-01

Full Text Available This study was aimed at determining the effective criteria for location selection of WPC Plants from agricultural residues in Iran. For this purpose, after review and studies papers and books, Six criteria" products and materials, regulations, technical and human, economic, infrastructure and environmental and also 30 sub-criteria were identified. The priority rates of these criteria and sub-criteria were evaluated by AHP technique. The results indicated that among 30 effective sub-criteria in location selection of the WPC plants from agricultural residues, amount of wastes supply (0.087, continuity of wastes supply, cost of wastes supply, amount of sales and export, granted facilities and less Hazards for the environment and forest had the highest priorities, which were rated as 0.071, 0.067, 0.065, 0.064 and 0.062 respectively.

The Geographical Distribution of Water Supply in Ekiti

African Journals Online (AJOL)

FIRST LADY

Indexed African Journals Online: www.ajol.info. An International ... time spent for water collection, the rating of water supply, and problems associated ... The people were asked to indicate how long it would take them to get good quality water ...

Application of the Water Needs Index: Can Tho City, Mekong Delta, Vietnam

Science.gov (United States)

Moglia, Magnus; Neumann, Luis E.; Alexander, Kim S.; Nguyen, Minh N.; Sharma, Ashok K.; Cook, Stephen; Trung, Nguyen H.; Tuan, Dinh D. A.

2012-10-01

SummaryProvision of urban water supplies to rapidly growing cities of South East Asia is difficult because of increasing demand for limited water supplies, periodic droughts, and depletion and contamination of surface and groundwater. In such adverse environments, effective policy and planning processes are required to secure adequate water supplies. Developing a Water Needs Index reveals key elements of the complex urban water supply by means of a participatory approach for rapid and interdisciplinary assessment. The index uses deliberative interactions with stakeholders to create opportunities for mutual understanding, confirmation of constructs and capacity building of all involved. In Can Tho City, located at the heart of the Mekong delta in Vietnam, a Water Needs Index has been developed with local stakeholders. The functional attributes of the Water Needs Index at this urban scale have been critically appraised. Systemic water issues, supply problems, health issues and inadequate, poorly functioning infrastructure requiring attention from local authorities have been identified. Entrenched social and economic inequities in access to water and sanitation, as well as polluting environmental management practices has caused widespread problems for urban populations. The framework provides a common language based on systems thinking, increased cross-sectoral communication, as well as increased recognition of problem issues; this ought to lead to improved urban water management. Importantly, the case study shows that the approach can help to overcome biases of local planners based on their limited experience (information black spots), to allow them to address problems experienced in all areas of the city.

Supply risk analysis: applying system dynamics to the Colombian healthcare sector

Directory of Open Access Journals (Sweden)

Juan Pablo Zamora Aguas

2013-09-01

Full Text Available This paper addresses supply risk in the oncological medicine supply chain (SC in Colombia. A system dynamics model was developed for assessing supply risk impact on SC operation and performance. The costs of risk and logis-tics operation were evaluated in current conditions and in a risk mitigation scenario. The model was based on a systematic analysis of supply networks, mainly concerning the reduction of overall SC costs and improving service, quality and opportunity performance index. This article has resulted from research into SC risk management (SCRM carried out by the Universidad Nacional de Colombia’s SEPRO research group.

Prediction method of seismic residual deformation of caisson quay wall in liquefied foundation

Science.gov (United States)

Wang, Li-Yan; Liu, Han-Long; Jiang, Peng-Ming; Chen, Xiang-Xiang

2011-03-01

The multi-spring shear mechanism plastic model in this paper is defined in strain space to simulate pore pressure generation and development in sands under cyclic loading and undrained conditions, and the rotation of principal stresses can also be simulated by the model with cyclic behavior of anisotropic consolidated sands. Seismic residual deformations of typical caisson quay walls under different engineering situations are analyzed in detail by the plastic model, and then an index of liquefaction extent is applied to describe the regularity of seismic residual deformation of caisson quay wall top under different engineering situations. Some correlated prediction formulas are derived from the results of regression analysis between seismic residual deformation of quay wall top and extent of liquefaction in the relative safety backfill sand site. Finally, the rationality and the reliability of the prediction methods are validated by test results of a 120 g-centrifuge shaking table, and the comparisons show that some reliable seismic residual deformation of caisson quay can be predicted by appropriate prediction formulas and appropriate index of liquefaction extent.

High quality residues from cover crops favor changes in microbial community and enhance C and N sequestration

Directory of Open Access Journals (Sweden)

Ileana Frasier

2016-04-01

Full Text Available The objective of the study was to evaluate the effect of a change in management on the soil microbial community and C sequestration. We conducted a 3-year field study in La Pampa (Argentina with rotation of sorghum (Sorghum bicolor in zero tillage alternating with rye (Secale cereale and vetch (Vicia villosa ssp. dasycarpa. Soil was sampled once a year at two depths. Soil organic matter fractions, dissolved organic matter, microbial biomass (MBC and community composition (DNA extraction, qPCR, and phospholipid FAME profiles were determined. Litter, aerial- and root biomass were collected and all material was analyzed for C and N. Results showed a rapid response of microbial biomass to a bacterial dominance independent of residue quality. Vetch had the highest diversity index, while the fertilized treatment had the lowest one. Vetch–sorghum rotation with high N mineralization rates and diverse microbial community sequestered more C and N in stable soil organic matter fractions than no-till sorghum alone or with rye, which had lower N turnover rates. These results reaffirm the importance of enhanced soil biodiversity for maintaining soil ecosystem functioning and services. The supply of high amounts of N-rich residues as provided by grass–legume cover crops could fulfill this objective.

Drug and chemical residues in domestic animals.

Science.gov (United States)

Mussman, H C

1975-02-01

Given the large number of chemical substances that may find their way into the food supply, a system is needed to monitor their presence. The U. S. Department of Agriculture's Meat and Poultry Inspection Program routinely tests for chemical residues in animals coming to slaughter. Pesticides, heavy metals, growth promotants (hormones and hormonelike agents), and antibiotics are included. Samples are taken statistically so that inferences as to national incidence of residues can be drawn. When a problem is identified, a more selective sampling is designed to help follow up on the initial regulatory action. In testing for pesticides, only DDT and dieldrin are found with any frequency and their levels are decreasing; violative residues of any chlorinated hydrocarbon are generally a result of an industrial accident rather than agricultural usage. Analyses for heavy metals have revealed detectable levels of mercury, lead, and others, but none at levels that are considered a health hazard. Of the hormone or hormonelike substances, only diethylstilbestrol has been a residue problem and its future is uncertain. The most extensive monitoring for veterinary drugs is on the antimicrobials, including sulfonamides, streptomycin, and the tetracycline group of antibiotics that constitute the bulk of the violations; their simultaneous use prophylactically and therapeutically has contributed to the problem in certain cases. A strong, well-designed user education program on proper application of pesticides, chemicals, and veterinary drugs appears to be one method of reducing the incidence of unwanted residues.

Designing indicators of long-term energy supply security

International Nuclear Information System (INIS)

Jansen, J.C.; Van Arkel, W.G.; Boots, M.G.

2004-01-01

To our knowledge, so far amazingly little research work has been undertaken to construct meaningful indicators of long-run energy supply security for a particular nation or region. Currently, in addressing energy supply security, policy makers tend to emphasise short-term supply disruptions. In contrast, this pre-study accords with the broader Sustainability Outlook in considering the long-term perspective. This report starts with taking stock, in a concise way, of the official EU energy outlook and issues related to the opportunities to administer changes in the energy mix at the level of major energy use categories. Then a brief survey of relevant literature is made on long-term strategies to ensure survival of systems - be it biological, social, etc. - in an environment largely characterised by high uncertainty and a lot of unchartered territory. We found the work of Andrew Stirling very inspiring in this context. Based on his work and considering the limitations of the present research activity, we retained the Shannon index as the best 'simple' indicator of diversity. In the core of the report, the Shannon index is elaborated into four indicators of long-term energy supply security. Stepwise, additional aspects of long-term energy supply security are introduced. These aspects are: Diversification of energy sources in energy supply; Diversification of imports with respect to imported energy sources; Long-term political stability in regions of origin; The resource base in regions of origin, including the home region/country itself. After small adjustments to allow for data availability, these indicators were applied to the reference year 2030 of four long-term scenarios with data of base year 1995 and projections for underlying variables provided by the Netherlands Environmental Assessment Agency (MNP). Preliminary interpretation of the results suggests the usefulness of the indicators presented in this report. A second activity undertaken in this report was

U.S. Billion-Ton Update: Biomass Supply for a Bioenergy and Bioproducts Industry

Energy Technology Data Exchange (ETDEWEB)

Downing, Mark [ORNL; Eaton, Laurence M [ORNL; Graham, Robin Lambert [ORNL; Langholtz, Matthew H [ORNL; Perlack, Robert D [ORNL; Turhollow Jr, Anthony F [ORNL; Stokes, Bryce [Navarro Research & Engineering; Brandt, Craig C [ORNL

2011-08-01

The report, Biomass as Feedstock for a Bioenergy and Bioproducts Industry: The Technical Feasibility of a Billion-Ton Annual Supply (generally referred to as the Billion-Ton Study or 2005 BTS), was an estimate of 'potential' biomass based on numerous assumptions about current and future inventory, production capacity, availability, and technology. The analysis was made to determine if conterminous U.S. agriculture and forestry resources had the capability to produce at least one billion dry tons of sustainable biomass annually to displace 30% or more of the nation's present petroleum consumption. An effort was made to use conservative estimates to assure confidence in having sufficient supply to reach the goal. The potential biomass was projected to be reasonably available around mid-century when large-scale biorefineries are likely to exist. The study emphasized primary sources of forest- and agriculture-derived biomass, such as logging residues, fuel treatment thinnings, crop residues, and perennially grown grasses and trees. These primary sources have the greatest potential to supply large, reliable, and sustainable quantities of biomass. While the primary sources were emphasized, estimates of secondary residue and tertiary waste resources of biomass were also provided. The original Billion-Ton Resource Assessment, published in 2005, was divided into two parts-forest-derived resources and agriculture-derived resources. The forest resources included residues produced during the harvesting of merchantable timber, forest residues, and small-diameter trees that could become available through initiatives to reduce fire hazards and improve forest health; forest residues from land conversion; fuelwood extracted from forests; residues generated at primary forest product processing mills; and urban wood wastes, municipal solid wastes (MSW), and construction and demolition (C&D) debris. For these forest resources, only residues, wastes, and small

Ecology, Economy and security of supply of the Dutch Electricity Supply System. A scenario based future analysis

International Nuclear Information System (INIS)

Roedel, J.G.

2008-01-01

The Dutch electricity sector has been transformed into a liberalized international energy market. Market players are free to choose from various electricity generation options when replacing or expanding production capacity. However, choices that are made now will influence emissions (ecology), integral costs (economy) and availability (security of supply) for the next 25 - 40 years. This thesis shows if and how, based on the current electricity supply system, an optimal balance of ecology, economy and security of supply can be achieved. First, the current electricity supply system is described to create a frame of reference. Then, future technological developments are described for electricity production options. Four potential scenarios are constructed featuring various uncertainties: the globalising versus the local economy; priority versus subordination for the environment; and the security/insecurity of the fuel supply. These four scenarios are worked out with a specially developed techno-economic simulation model; the results are analysed in terms of ecology, economy and security of supply. The findings indicate that it is impossible to arrive at an optimal balance for the defined scenarios. Scenarios with a low environmental impact lead to high integral costs and vice versa. However, by applying a smart combination of various modern generation technologies, CO2 capture and storage, the deployment of biomass and the re-use of residual heat it is possible to reach an optimal balance whereby the additional integral costs can be kept under control compared with the lowest-cost scenarios. To achieve this, clear growth and incentive guidelines need to be established for the various production options. This thesis will form a good starting point for that exercise

The Soil-Water Characteristic Curve of Unsaturated Tropical Residual Soil

Science.gov (United States)

Yusof, M. F.; Setapa, A. S.; Tajudin, S. A. A.; Madun, A.; Abidin, M. H. Z.; Marto, A.

2016-07-01

This study was conducted to determine the SWCC of unsaturated tropical residual soil in Kuala Lumpur, Malaysia. Undisturbed soil samples at five locations of high-risk slopes area were taken at a depth of 0.5 m using block sampler. In the determination of the SWCC, the pressure plate extractor with the capacity of 1500 kN/m2 has been used. The index properties of the soil such as natural moisture content, Atterberg limits, specific gravity, and soil classification are performed according to BS 1377: Part 2: 1990. The results of index properties show that the natural moisture content of the soil is between 36% to 46%, the plasticity index is between 10% - 26%, the specific gravity is between 2.51 - 2.61 and the soils is classified as silty organic clay of low plasticity. The SWCC data from the pressure plate extractor have been fitted with the Fredlund and Xing equation. The results show that the air entry value and residual matric suction for residual soils are in the range of 17 kN/m2 to 24 kN/m2 and 145 kN/m2 to 225 kN/m2 respectively. From the fitting curve, it is found that the average value of the Fredlund and Xing parameters such as a, n and m are in the range of 0.24-0.299, 1.7-4.8 and 0.142-0.440 respectively.

Recycling crop residues for use in recirculating hydroponic crop production

Science.gov (United States)

Mackowiak, C. L.; Garland, J. L.; Sager, J. C.

1996-01-01

As part of bioregenerative life support feasibility testing by NASA, crop residues are being used to resupply elemental nutrients to recirculating hydroponic crop production systems. Methods for recovering nutrients from crop residues have evolved from water soaking (leaching) to rapid aerobic bioreactor processing. Leaching residues recovered the majority of elements but it also recovered significant amounts of soluble organics. The high organic content of leachates was detrimental to plant growth. Aerobic bioreactor processing reduced the organic content ten-fold, which reduced or eliminated phytotoxic effects. Wheat and potato production studies were successful using effluents from reactors having with 8- to 1-day retention times. Aerobic bioreactor effluents supplied at least half of the crops elemental mass needs in these studies. Descriptions of leachate and effluent mineral content, biomass productivity, microbial activity, and nutrient budgets for potato and wheat are presented.

Vision for utilization of livestock residue as bioenergy resource in Japan

International Nuclear Information System (INIS)

Fujino, Junichi; Morita, Akihiro; Matsuoka, Yasunari; Sawayama, Shigeki

2005-01-01

Utilization of livestock residue is important not only for energy recovery and material recycling but also for preventing environmental pollution. This paper focuses on the following options from the viewpoint of the Law on Promoting Proper Management and Use of Livestock Excreta and the Kyoto protocol: energy use from livestock residue, reductions in CO 2 emissions resulting from substitution of fossil fuels, and reduction of other greenhouse gas emissions through appropriate treatment of livestock residue. Bioenergy potential of livestock residue in Japan was estimated to be 167 PJ in the year 2000. This is equivalent to about 0.7% of total primary energy supply. Biogas production with methane fermentation and burning poultry residue at power plants can produce 4.1 TWh of electricity and 46 PJ of heat. The amount of CO 2 substitution for fossil fuels is 6.9 Mt-CO 2 . This corresponds to about 0.6% of total CO 2 emissions in 1990. This also has an additional effect of reducing other greenhouse gas (CH 4 and N 2 O) emissions from conventional treatment of livestock residue. Development of biogas plants, promotion of biogas utilization, and effective use of fertilizer components extracted from livestock residue are expected to gain importance in the future

Customer Dissatisfaction Index and its Improvement Costs

Science.gov (United States)

Lvovs, Aleksandrs; Mutule, Anna

2010-01-01

The paper gives description of customer dissatisfaction index (CDI) that can be used as reliability level characterizing factor. The factor is directly joined with customer satisfaction of power supply and can be used for control of reliability level of power supply for residential customers. CDI relations with other reliability indices are shown. Paper also gives a brief overview of legislation of Latvia in power industry that is the base for CDI introduction. Calculations of CDI improvement costs are performed in the paper too.

Accuracy of autotitrating CPAP to estimate the residual Apnea-Hypopnea Index in patients with obstructive sleep apnea on treatment with autotitrating CPAP.

Science.gov (United States)

Desai, Himanshu; Patel, Anil; Patel, Pinal; Grant, Brydon J B; Mador, M Jeffery

2009-11-01

Autotitrating continuous positive airway pressure (auto-CPAP) devices now have a smart card (a pocket-sized card with embedded integrated circuits which records data from the CPAP machine such as CPAP usage, CPAP pressure, large leak, etc.) which can estimate the Apnea-Hypopnea Index (AHI) on therapy. The aim of this study was to determine the accuracy of auto-CPAP in estimating the residual AHI in patients with obstructive sleep apnea (OSA) who were treated with auto-CPAP without a CPAP titration study. We studied 99 patients with OSA from April 2005 to May 2007 who underwent a repeat sleep study using auto-CPAP. The estimated AHI from auto-CPAP was compared with the AHI from an overnight polysomnogram (PSG) on auto-CPAP using Bland-Altman plot and likelihood ratio analyses. A PSG AHI cutoff of five events per hour was used to differentiate patients optimally treated with auto-CPAP from those with residual OSA on therapy. Bland and Altman analysis showed good agreement between auto-CPAP AHI and PSG AHI. There was no significant bias when smart card estimates of AHI at home were compared to smart card estimates obtained in the sleep laboratory. An auto-CPAP cutoff for the AHI of six events per hour was shown to be optimal for differentiating patients with and without residual OSA with a sensitivity of 0.92 (95% confidence interval (CI) 0.76 to 0.98) and specificity of 0.90 (95% CI 0.82 to 0.95) with a positive likelihood ratio (LR) of 9.6 (95% CI 5.1 to 21.5) and a negative likelihood ratio of 0.085 (95% CI 0.02 to 0.25). Auto-CPAP AHI of eight events per hour yielded the optimal sensitivity (0.94, 95% CI 0.73 to 0.99) and specificity (0.90, 95% CI 0.82 to 0.95) with a positive LR of 9.6 (95% CI 5.23 to 20.31) and a negative LR of 0.065 (95% CI 0.004 to 0.279) to identify patients with a PSG AHI of > or = 10 events per hour. Auto-CPAP estimate of AHI may be used to estimate residual AHI in patients with OSA of varying severity treated with auto-CPAP.

An approach to the estimation of the value of agricultural residues used as biofuels

International Nuclear Information System (INIS)

Kumar, A.; Purohit, P.; Rana, S.; Kandpal, T.C.

2002-01-01

A simple demand side approach for estimating the monetary value of agricultural residues used as biofuels is proposed. Some of the important issues involved in the use of biomass feedstocks in coal-fired boilers are briefly discussed along with their implications for the maximum acceptable price estimates for the agricultural residues. Results of some typical calculations are analysed along with the estimates obtained on the basis of a supply side approach (based on production cost) developed earlier. The prevailing market prices of some agricultural residues used as feedstocks for briquetting are also indicated. The results obtained can be used as preliminary indicators for identifying niche areas for immediate/short-term utilization of agriculture residues in boilers for process heating and power generation. (author)

Trade-Offs between Economic and Environmental Optimization of the Forest Biomass Generation Supply Chain in Inner Mongolia, China

Directory of Open Access Journals (Sweden)

Min Zhang

2017-11-01

Full Text Available The utilization of forest residue to produce forest biomass energy can mitigate CO2 emissions and generate additional revenue for related eco-enterprises and farmers. In China, however, the benefit of this utilization is still in question because of high costs and CO2 emissions in the entire supply chain. In this paper, a multi-objective linear programming model (MLP is employed to analyze the trade-offs between the economic and environmental benefits of all nodes within the forest biomass power generation supply chain. The MLP model is tested in the Mao Wu Su biomass Thermoelectric Company. The optimization results show that (1 the total cost and CO2 emissions are decreased by US$98.4 thousand and 60.6 thousand kg, respectively; 3750 thousand kg of waste-wood products is reduced and 3750 thousand kg of sandy shrub stubble residue is increased; (2 64% of chipped sandy shrub residue is transported directly from the forestland to the power plant, 36% of non-chipped sandy shrub residue is transported from the forestland to the power plant via the chipping plant; (3 transportation and chipping play a significant role in the supply chain; and (4 the results of a sensitivity analysis show that the farmer’s average transportation distance should be 84.13 km and unit chipping cost should be $0.01022 thousand for the optimization supply cost and CO2 emissions. Finally, we suggest the following: (1 develop long-term cooperation with farmers; (2 buy chain-saws for regularly used farmers; (3 build several chipping plants in areas that are rich in sandy shrub.

Informed community mobilization for dengue prevention in households with and without a regular water supply: Secondary analysis from the Camino Verde trial in Nicaragua.

Science.gov (United States)

Cárcamo, Alvaro; Arosteguí, Jorge; Coloma, Josefina; Harris, Eva; Ledogar, Robert J; Andersson, Neil

2017-05-30

Studies in different countries have identified irregular water supply as a risk factor for dengue virus transmission. In 2013, Camino Verde, a cluster-randomised controlled trial in Managua, Nicaragua, and Mexico's Guerrero State, demonstrated impact of evidence-based community mobilisation on recent dengue infection and entomological indexes of infestation by Aedes aegypti mosquitoes. This secondary analysis of data from the trial impact survey asks: (1) what is the importance of regular water supply in neighbourhoods with and without the trial intervention and (2) can community interventions like Camino Verde reasonably exclude households with adequate water supply? Entomological data collected in the dry season of 2013 in intervention and control communities allow contrasts between households with regular and irregular water supplies. Indicators of entomological risk included the House Index and pupa positive household index. Generalised linear mixed models with cluster as a random effect compared households with and without regular water, and households in intervention and control communities. For the House Index, regular water supply was associated with a protection in both intervention households (OR 0.7, 95%CI 0.6-0.9) and control households (OR 0.6, 95%CI 0.5-0.8). For the pupa positive household index, we found a similar protection from regular water supply in intervention households (OR 0.6, 95%CI 0.4-0.8) and control households (OR 0.7, 95%CI 0.5-0.9). The Camino Verde intervention had a similar impact on House Index in households with regular water supply (OR 0.7, 95%CI 0.5-1.0) and irregular water supply (OR 0.6, 95%CI 0.4-0.8); for the pupa positive household index, the effect of the intervention was very similar in households with regular (OR0.5, 95%CI 0.3-0.8) and irregular (OR 0.5, 95%CI 0.3-0.9) water supply. While Aedes aegypti control efforts based on informed community mobilisation had a strong impact on households without a regular water

Contracting in the wine supply chain with bilateral moral hazard, residual claimancy and multitasking

DEFF Research Database (Denmark)

Steiner, Bodo

2012-01-01

This paper takes a quasi-case-study approach to stylised wine industry facts to assess predictions about the optimal sharing rule from a principal–agent model with residual claimancy. An optimal sharing contract is developed between a grape grower and a winery, when a risk-averse grower allocates...

Indicators of security of natural gas supply in Asia

International Nuclear Information System (INIS)

Cabalu, Helen

2010-01-01

Natural gas has become an increasingly valuable resource and a global commodity. The demand for it has significantly increased. Japan, Korea and Taiwan heavily rely on liquefied natural gas (LNG) imports for their gas supplies from Malaysia, Brunei, Indonesia, Australia and the Middle East. On the other hand, countries like Thailand and Singapore import gas via trans-border pipelines. Gas supply interruptions, volatile gas prices, transportation and distribution bottlenecks, and a growing reliance on imports over longer distances have renewed interest on gas security in Asia. This paper examines the relative vulnerability to natural gas supply disruptions of seven gas-importing countries in Asia for year 2008. Based on four indicators of security of gas supply, a composite gas supply security index is estimated as an overall indication of gas vulnerability for our sample countries. The results demonstrate that there are differences in the values of the overall indicator of gas vulnerability among countries and the assessment is useful in developing an effective strategy of natural gas supply security in countries in the Asian region. (author)

The index of Fourier integral operators on manifolds with conical singularities

International Nuclear Information System (INIS)

Nazaikinskii, Vladimir E; Sternin, B Yu; Schulze, B-W

2001-01-01

We describe homogeneous canonical transformations of the cotangent bundle of a manifold with conical singular points and compute the index of an elliptic Fourier integral operator obtained by the quantization of such a transformation. The answer involves the index of an elliptic Fourier integral operator on a smooth manifold and the residues of the conormal symbol

Assessment of Political Vulnerabilities on Security of Energy Supply in the Baltic States

Directory of Open Access Journals (Sweden)

Česnakas Giedrius

2016-06-01

Full Text Available The article argues that despite the evident link between political environment and security of energy supply, political elements are not sufficiently represented in contemporary scientific literature, namely in indexes that are designed for the assessment of security of energy supply. In an attempt to fill this gap, the article presents an innovative methodology for quantitative assessment of the political vulnerabilities on security of energy supply and applies it to the analysis of the Baltic States.

Report on ENGIE's regulated tariffs for gas sale - Audit supply costs and non-supply related costs. Deliberation of the Commission for energy regulation on the 25 May 2016 bearing approval of the audit report on supply costs and non-supply related costs as basis for the calculation of the evolution of ENGIE's regulated tariffs for natural gas sale

International Nuclear Information System (INIS)

Ladoucette, Philippe De; Edwige, Catherine; Gassin, Helene; Padova, Yann; Sotura, Jean-Pierre

2016-05-01

After a recall of the context and objectives of the analysis performed by the French Commission for Energy Regulation (CRE), and a synthetic presentation of the main conclusions, this report first proposes an assessment for 2015 by discussing the share of consumptions provided under the regulated tariff with respect to those provided on the retail market, the evolution of these tariffs, by noticing that ENGIE costs have been covered by income associated with sales at regulated tariffs. The second part addresses perspectives of evolution for supply costs by outlining the existence of market indexing, the lack of factors which would justify an evolution of gas price indexing level, and a possible reviewing of indices at the moment of revision of the indexing formula. The third part addresses the perspectives of evolution of non-supply related costs. It notices the impact of recent evolution of infrastructure costs, some lack of information regarding provisional trade costs, and a significant decrease of these costs for 2016

Residual nilpotence and residual solubility of groups

International Nuclear Information System (INIS)

Mikhailov, R V

2005-01-01

The properties of the residual nilpotence and the residual solubility of groups are studied. The main objects under investigation are the class of residually nilpotent groups such that each central extension of these groups is also residually nilpotent and the class of residually soluble groups such that each Abelian extension of these groups is residually soluble. Various examples of groups not belonging to these classes are constructed by homological methods and methods of the theory of modules over group rings. Several applications of the theory under consideration are presented and problems concerning the residual nilpotence of one-relator groups are considered.

Water Quality Study on the Hot and Cold Water Supply Systems at Vietnamese Hotels

Directory of Open Access Journals (Sweden)

Kanako Toyosada

2017-04-01

Full Text Available This study was conducted as part of the Joint Crediting Mechanism (JCM of the Japanese Ministry of Economy, Trade and Industry, and the Ministry of the Environment project’s preparation in Vietnam. Samples were taken from hot and cold water supplies from guest rooms’ faucets in 12 hotels in Hanoi city, Vietnam, and 13 hotels in Japan for comparison. A simple water quality measurement and determination of Legionella was carried out. The results showed that residual effective chlorine—which guarantees bactericidal properties—was not detected in tap water supplied in hotel rooms in Vietnam, and nitrite (an indicator of water pollution was detected in 40% of buildings. In the hotels in Japan, the prescribed residual chlorine concentration met the prescribed levels, and nitrite was not detected. Additionally, while there was no Legionella detected in the Japanese cases, it was detected in most of the Vietnamese hotels, which were found to manage the hot water storage tank at low temperatures of 40–50 °C. It was found that there were deficiencies in cold and hot water supply quality, and that there was no effective system in place for building operation maintenance and management.

Technospheric Mining of Rare Earth Elements from Bauxite Residue (Red Mud): Process Optimization, Kinetic Investigation, and Microwave Pretreatment.

Science.gov (United States)

Reid, Sable; Tam, Jason; Yang, Mingfan; Azimi, Gisele

2017-11-10

Some rare earth elements (REEs) are classified under critical materials, i.e., essential in use and subject to supply risk, due to their increasing demand, monopolistic supply, and environmentally unsustainable and expensive mining practices. To tackle the REE supply challenge, new initiatives have been started focusing on their extraction from alternative secondary resources. This study puts the emphasis on technospheric mining of REEs from bauxite residue (red mud) produced by the aluminum industry. Characterization results showed the bauxite residue sample contains about 0.03 wt% REEs. Systematic leaching experiments showed that concentrated HNO 3 is the most effective lixiviant. However, because of the process complexities, H 2 SO 4 was selected as the lixiviant. To further enhance the leaching efficiency, a novel process based on microwave pretreatment was employed. Results indicated that microwave pretreatment creates cracks and pores in the particles, enabling the lixiviant to diffuse further into the particles, bringing more REEs into solution, yielding of 64.2% and 78.7% for Sc and Nd, respectively, which are higher than the maximum obtained when HNO 3 was used. This novel process of "H 2 SO 4 leaching-coupled with-microwave pretreatment" proves to be a promising technique that can help realize the technological potential of REE recovery from secondary resources, particularly bauxite residue.

Demand and supply of wood fuels in the emission trade

International Nuclear Information System (INIS)

Ranta, T.; Lahtinen, P.; Laitila, J.

2005-01-01

The emission trade according to the EU directive on greenhouse gas emission allowance started at the beginning of the year 2005. This will boost the demand for wood fuels because of the addition-al value of CO 2 neutrality compared to fossil fuels. This bulletin covers the development of the demand and supply of wood fuels from 2002 to 2010 both at a national and a provincial level. The demand and supply balance of wood fuels will be evaluated both without the effect of emission trade and when the emission trade price level is 20 euro/ton- CO 2 for emission rights in 2010. The evaluations of fuel consumption for individual boilers were made with the help of the databases of Electrowatt-Ekono Ltd. The demand for wood fuels was estimated to double by the year 2010, being almost 50 TWh. The share of forest chips of the demand was one third, i.e. 17 TWh. The supply potential was divided into forest chips and solid by-products from forest industry. Forest chip sources included small diameter wood from young forests and logging residues and stumps from re-generation felling sites. The supply potential calculations of logging residues and stump biomass were based on databases of regeneration felling stands. The biomass potential from small diamreter wood was evaluated on the basis of field measurements of NFI 8 and 9 at a provincial level and multi-source data at a municipal level. In 2010, the supply potential of by-products was estimated to be 28 TWh of which 11 TWh was marketable out-side of the internal use of forest industry. Correspondingly, the theoretical potential of forest chips was estimated to be 51 TWh and the techno-economical potential 24 TWh. As a result of the regional optimization model, the energy use of wood fuels was 29 TWh, which was 59 % of the potential demand. In emission trade the demand was 33 TWh, which was 68 % of the potential demand. Regionally, the potential demand for wood fuels for energy use was higher than the supply in all provinces

Optimal Willingness to Supply Wholesale Electricity Under Asymmetric Linearized Marginal Costs

Directory of Open Access Journals (Sweden)

David Hudgins

2012-01-01

Full Text Available This analysis derives the profit-maximizing willingness to supply functions for single-plant and multi-plant wholesale electricity suppliers that all incur linear marginal costs. The optimal strategy must result in linear residual demand functions in the absence of capacity constraints. This necessarily leads to a linear pricing rule structure that can be used by firm managers to construct their offer curves and to serve as a benchmark to evaluate firm profit-maximizing behavior. The procedure derives the cost functions and the residual demand curves for merged or multi-plant generators, and uses these to construct the individual generator plant offer curves for a multi-plant firm.

Informed community mobilization for dengue prevention in households with and without a regular water supply: Secondary analysis from the Camino Verde trial in Nicaragua

Directory of Open Access Journals (Sweden)

Alvaro Cárcamo

2017-05-01

Full Text Available Abstract Background Studies in different countries have identified irregular water supply as a risk factor for dengue virus transmission. In 2013, Camino Verde, a cluster-randomised controlled trial in Managua, Nicaragua, and Mexico’s Guerrero State, demonstrated impact of evidence-based community mobilisation on recent dengue infection and entomological indexes of infestation by Aedes aegypti mosquitoes. This secondary analysis of data from the trial impact survey asks: (1 what is the importance of regular water supply in neighbourhoods with and without the trial intervention and (2 can community interventions like Camino Verde reasonably exclude households with adequate water supply? Methods Entomological data collected in the dry season of 2013 in intervention and control communities allow contrasts between households with regular and irregular water supplies. Indicators of entomological risk included the House Index and pupa positive household index. Generalised linear mixed models with cluster as a random effect compared households with and without regular water, and households in intervention and control communities. Results For the House Index, regular water supply was associated with a protection in both intervention households (OR 0.7, 95%CI 0.6–0.9 and control households (OR 0.6, 95%CI 0.5–0.8. For the pupa positive household index, we found a similar protection from regular water supply in intervention households (OR 0.6, 95%CI 0.4–0.8 and control households (OR 0.7, 95%CI 0.5–0.9. The Camino Verde intervention had a similar impact on House Index in households with regular water supply (OR 0.7, 95%CI 0.5–1.0 and irregular water supply (OR 0.6, 95%CI 0.4–0.8; for the pupa positive household index, the effect of the intervention was very similar in households with regular (OR0.5, 95%CI 0.3–0.8 and irregular (OR 0.5, 95%CI 0.3–0.9 water supply. Conclusion While Aedes aegypti control efforts based on informed community

The Effects of Inflation and Money Supply Announcements on Interest Rates

OpenAIRE

Thomas Urich; Paul Wachtel

1984-01-01

This paper examines the impact of the money supply and inflation rate announcements on interest rates. Survey data on expectations of the money supply and consumer and producer price indexes are used to distinguish anticipated and unanticipated components of the announcements. This distinction is used to test for the efficiency of the financial market response to the announcements of new information. The results indicate that the unanticipated components of the announced changes in the Produc...

Application of SAW method for multiple-criteria comparative analysis of the reliability of heat supply organizations

Science.gov (United States)

Akhmetova, I. G.; Chichirova, N. D.

2016-12-01

Heat supply is the most energy-consuming sector of the economy. Approximately 30% of all used primary fuel-and-energy resources is spent on municipal heat-supply needs. One of the key indicators of activity of heat-supply organizations is the reliability of an energy facility. The reliability index of a heat supply organization is of interest to potential investors for assessing risks when investing in projects. The reliability indices established by the federal legislation are actually reduced to a single numerical factor, which depends on the number of heat-supply outages in connection with disturbances in operation of heat networks and the volume of their resource recovery in the calculation year. This factor is rather subjective and may change in a wide range during several years. A technique is proposed for evaluating the reliability of heat-supply organizations with the use of the simple additive weighting (SAW) method. The technique for integrated-index determination satisfies the following conditions: the reliability level of the evaluated heat-supply system is represented maximum fully and objectively; the information used for the reliability-index evaluation is easily available (is located on the Internet in accordance with demands of data-disclosure standards). For reliability estimation of heat-supply organizations, the following indicators were selected: the wear of equipment of thermal energy sources, the wear of heat networks, the number of outages of supply of thermal energy (heat carrier due to technological disturbances on heat networks per 1 km of heat networks), the number of outages of supply of thermal energy (heat carrier due to technologic disturbances on thermal energy sources per 1 Gcal/h of installed power), the share of expenditures in the cost of thermal energy aimed at recovery of the resource (renewal of fixed assets), coefficient of renewal of fixed assets, and a coefficient of fixed asset retirement. A versatile program is developed

ASEAN grid-connected biomass residues fired cogeneration plants

International Nuclear Information System (INIS)

Adnan, M.F.; Alias, R.

2006-01-01

Energy supply is one of the major concerns in the world. With uncertainty in the main oil suppliers, the oil price is expected to remain high due to continuous demand from the world. Since oil is mostly used for electricity and transportation, its shortage would cause major disruptions in our daily activities. Thus to counter this scenario and faster depletion of fossil fuel resources, various measures have been taken to find alternative source of energy such as renewable energy. One of the renewable energy sources is from biomass residues which is aplenty particularly in ASEAN. Through one of the collaboration programme between ASEAN and EC which is The EC-ASEAN Cogeneration Programme, a number of Full-Scale Demonstration Projects (FSDP) using biomass residues have been commissioned and implemented successfully. Four of the FSDPs in Thailand and Malaysia are connected to the grid. These projects have been operating very well and since the fuel is commonly available in this ASEAN region, duplication should not be a problem. Thus, this paper would highlight the success stories in implementing biomass residues grid connected project while enhancing cooperation between ASEAN and EC. (Author)

A SES (sustainable energy security) index for developing countries

International Nuclear Information System (INIS)

Narula, Kapil; Reddy, B. Sudhakara

2016-01-01

Measuring the performance of the energy system of a country is a prerequisite for framing good energy polices. However, the existing indices which claim to measure energy security have limited applicability for developing countries. Energy sustainability is also increasingly gaining importance and countries are keen to measure it to tailor their energy policies. Therefore, the concept of SES (sustainable energy security) has been proposed as the goal for a developing country. This paper presents an analytical framework for the assessment of SES of an energy system and the methodology for constructing an SES index. A hierarchical structure has been proposed and the energy system has been divided into 'supply', 'conversion & distribution' and 'demand' sub-systems. Each subsystem is further divided into its components which are evaluated for four dimensions of SES, Availability, Affordability, Efficiency and (Environmental) Acceptability using quantitative metrics. Energy indices are constructed using 'scores' (objective values), and 'weights' (subjective values representing tradeoffs) which are then aggregated, bottom-up, to obtain an overall SES Index for a country. The proposed SES Index is multidimensional, quantitative, modular, systemic and flexible. Such a SES Index can be used to design policy interventions for transitioning to a sustainable and a secure energy future. - Highlights: • A SES (sustainable energy security) index is proposed for developing countries. • A hierarchical structure includes the entire energy system from supply to end use. • The performance of all energy sources, energy carriers and sectors is assessed. • Availability, affordability, efficiency and acceptability dimensions are evaluated. • The SES index is multidimensional, quantitative, modular, systemic and flexible.

Association between vascular supply, stage and tumour size of juvenile nasopharyngeal angiofibroma.

Science.gov (United States)

Mehan, Raghav; Rupa, V; Lukka, Vijay Kumar; Ahmed, Munawar; Moses, Vinu; Shyam Kumar, N K

2016-12-01

Juvenile nasopharyngeal angiofibroma (JNA) is a highly vascular tumour seen in adolescent males. To study the vascular pattern of these tumours, we retrospectively reviewed the records of patients with JNA who underwent preoperative angiography. Most (82.2 %) of the 45 patients assessed were Radkowski stage III with a mean size of 5.29 cm. There was a significant association between tumour stage and size (p = 0.029). Ten different vessels were seen to supply these tumours. All tumours had primary supply from the distal third of the ipsilateral internal maxillary artery (IMA). Accessory vessel supply was chiefly from the Vidian branch of internal carotid artery (ICA) (55.6 %). Stage III tumours were supplied by a greater number of feeding vessels than earlier stage tumours (p < 0.01). Larger tumours were more likely to have ICA supply (p = 0.04). Bilateral supply was seen in 48.7 %. However, there was no predominance of bilateral over ipsilateral IMA supply even in advanced stage tumours. One patient in our series was found to have a caroticocavernous fistula. Residual or recurrent tumours were characterized by new vasculature (100 %) and greater accessory supply from the ipsilateral ICA (85.7 %). Our study highlights the fact that surgical planning cannot be dependent on staging alone and should include preoperative assessment of tumour vasculature by angiography.

Spatio-temporal availability of field crop residues for biofuel production in Northwest and Southwest China

NARCIS (Netherlands)

Han, L.; Wang, X.; Spiertz, J.H.J.; Yang, L.; Zhou, Y.; Liu, J.; Xie, G.

2015-01-01

Developing bioenergy from plant feedstocks is considered an opportunity to reduce greenhouse gas emissions and secure biofuel supply. This study is an assessment of the availability of field crop residues for bioenergy feedstocks in northwest China (NWC) and southwest China (SWC). The amount of

A multi-attribute Systemic Risk Index for comparing and prioritizing chemical industrial areas

International Nuclear Information System (INIS)

Reniers, G.L.L.; Sörensen, K.; Dullaert, W.

2012-01-01

Measures taken to decrease interdependent risks within chemical industrial areas should be based on quantitative data from a holistic (cluster-based) point of view. Therefore, this paper examines the typology of networks representing industrial areas to formulate recommendations to more effectively protect a chemical cluster against existing systemic risks. Chemical industrial areas are modeled as two distinct complex networks and are prioritized by computing two sub-indices with respect to existing systemic safety and security risks (using Domino Danger Units) and supply chain risks (using units from an ordinal expert scale). Subsequently, a Systemic Risk Index for the industrial area is determined employing the Borda algorithm, whereby the systemic risk index considers both a safety and security network risk index and a supply chain network risk index. The developed method allows decreasing systemic risks within chemical industrial areas from a holistic (inter-organizational and/or inter-cluster) perspective. An illustrative example is given.

Water conservation implications for decarbonizing non-electric energy supply: A hybrid life-cycle analysis.

Science.gov (United States)

Liu, Shiyuan; Wang, Can; Shi, Lei; Cai, Wenjia; Zhang, Lixiao

2018-08-01

Low-carbon transition in the non-electric energy sector, which includes transport and heating energy, is necessary for achieving the 2 °C target. Meanwhile, as non-electric energy accounts for over 60% of total water consumption in the energy supply sector, it is vital to understand future water trends in the context of decarbonization. However, few studies have focused on life-cycle water impacts for non-electric energy; besides, applying conventional LCA methodology to assess non-electric energy has limitations. In this paper, a Multi-Regional Hybrid Life-Cycle Assessment (MRHLCA) model is built to assess total CO 2 emissions and water consumption of 6 non-electric energy technologies - transport energy from biofuel and gasoline, heat supply from natural gas, biogas, coal, and residual biomass, within 7 major emitting economies. We find that a shift to natural gas and residual biomass heating can help economies reduce 14-65% CO 2 and save more than 21% water. However, developed and developing economies should take differentiated technical strategies. Then we apply scenarios from IMAGE model to demonstrate that if economies take cost-effective 2 °C pathways, the water conservation synergy for the whole energy supply sector, including electricity, can also be achieved. Copyright © 2018 Elsevier Ltd. All rights reserved.

Proposal of a Sustainability Index for the Automotive Industry

Directory of Open Access Journals (Sweden)

Miguel F. Salvado

2015-02-01

Full Text Available In a scenario of increasing globalization, sustainable development has emerged as an attractive and strategic issue for both countries and individual organizations and their supply chains. Companies have faced different challenges in seeking to combine the best economic performance with increased social and environmental responsibility. Monitoring sustainability is essential for decision-making and management of activities that comprise an organization’s system processes. Evaluation can be performed using indices or a set of indicators. In addition to increasing organizational effectiveness and improving competitiveness, customer service and profitability, it is also a crucial influence on the development of business sustainability. This paper proposes a sustainability index that provides companies with information about their level of economic, social and environmental sustainability, showing their performance at both individual and supply chain level. The importance of the indicators is assessed by using the Analytic Hierarchy Process (AHP methodology applied to a case study of a supply chain in the automotive industry. The various stages experienced during the construction of the index are also shown. The final results achieved are then presented and discussed in light of the objectives.

Quadratic residues and non-residues selected topics

CERN Document Server

Wright, Steve

2016-01-01

This book offers an account of the classical theory of quadratic residues and non-residues with the goal of using that theory as a lens through which to view the development of some of the fundamental methods employed in modern elementary, algebraic, and analytic number theory. The first three chapters present some basic facts and the history of quadratic residues and non-residues and discuss various proofs of the Law of Quadratic Reciprosity in depth, with an emphasis on the six proofs that Gauss published. The remaining seven chapters explore some interesting applications of the Law of Quadratic Reciprocity, prove some results concerning the distribution and arithmetic structure of quadratic residues and non-residues, provide a detailed proof of Dirichlet’s Class-Number Formula, and discuss the question of whether quadratic residues are randomly distributed. The text is a valuable resource for graduate and advanced undergraduate students as well as for mathematicians interested in number theory.

Hospital Supply Expenses: An Important Ingredient in Health Services Research.

Science.gov (United States)

Abdulsalam, Yousef; Schneller, Eugene

2017-07-01

The purpose of this article is to shed light on hospital supply expenses, which form the second largest expense category after payroll and hold more promise for improving cost-efficiency compared to payroll. However, limited research has rigorously scrutinized this cost category, and it is rarely given specific consideration across cost-focused studies in health services publications. After reviewing previously cited estimates, we examine and independently validate supply expense data (collected by the American Hospital Association) for over 3,500 U.S. hospitals. We find supply expenses to make up 15% of total hospital expenses, on average, but as high as 30% or 40% in hospitals with a high case-mix index, such as surgery-intensive hospitals. Future research can use supply expense data to better understand hospital strategies that aim to manage costs, such as systemization, physician-hospital arrangements, and value-based purchasing.

Atmospheric effects on the NDVI - Strategies for its removal. [Normalized Difference Vegetation Index

Science.gov (United States)

Kaufman, Y. J.; Tanre, D.; Holben, B. N.; Markham, B.; Gitelson, A.

1992-01-01

The compositing technique used to derive global vegetation index (NDVI) from the NOAA AVHRR radiances reduces the residual effect of water vapor and aerosol on the NDVI. The reduction in the atmospheric effect is shown using a comprehensive measured data set for desert conditions, and a simulation for grass with continental aerosol. A statistical analaysis of the probability of occurrence of aerosol optical thickness and precipitable water vapor measured in different climatic regimes is used for this simulation. It is concluded that for a long compositing period (e.g., 27 days), the residual aerosol optical thickness and precipitable water vapor are usually too small to be corrected. For a 9-day compositing, the residual average aerosol effect may be about twice the correction uncertainty. For Landsat TM or Earth Observing System Moderate Resolution Imaging Spectrometer (EOS-MODIS) data, the newly defined atmospherically resistant vegetation index (ARVI) is more promising than possible direct atmospheric correction schemes, except for heavy desert dust conditions.

DEFECT MONITORING IN IRON CASTING USING RESIDUES OF AUTOREGRESSIVE MODELS

Directory of Open Access Journals (Sweden)

Vanusa Andrea Casarin

2013-06-01

Full Text Available The purpose of this study is to monitor the index of general waste irons forecasting nodular and gray using the residues originated from the methodology Box & Jenkins by means of X-bar and R control charts. Search is to find a general class of model ARIMA (p, d, q but as data have autocorrelation is found to the number of residues which allowed the application of charts. The found model was the model SARIMA (0,1,1(0,1,1 . In step of checking the stability of the model was found that some comments are out of control due to temperature and chemical composition.

A Review on Recycling of Sunflower Residue for Sustaining Soil Health

Directory of Open Access Journals (Sweden)

Subhash Babu

2014-01-01

Full Text Available Modern agriculture is now at the crossroads ecologically, economically, technologically, and socially due to soil degradation. Critical analysis of available information shows that problems of degradation of soil health are caused due to imbalanced, inadequate and promacronutrient fertilizer use, inadequate use or no use of organic manures and crop residues, and less use of good quality biofertilizers. Although sizeable amount of crop residues and manure is produced in farms, it is becoming increasingly complex to recycle nutrients, even within agricultural systems. Therefore, there is a need to use all available sources of nutrients to maintain the productivity and fertility at a required level. Among the available organic sources of plant nutrients, crop residue is one of the most important sources for supplying nutrients to the crop and for improving soil health. Sunflower is a nontraditional oil seed crop produced in huge amount of crop residue. This much amount of crop residues is neither used as feed for livestock nor suitable for fuel due to low energy value per unit mass. However, its residue contains major plant nutrients in the range from 0.45 to 0.60% N, 0.15 to 0.22% P, and 1.80 to 1.94% K along with secondary and micronutrients, so recycling of its residue in the soil may be one of the best alternative practices for replenishing the depleted soil fertility and improving the physical, chemical, and biological properties of the soil in the present era of production. However, some researchers have reported allelopathic effects of sunflower residue on different crops. So, selection of suitable crops and management practices may play an important role to manage the sunflower residue at field level.

Effect of mungbean residue and nitrogen levels on barley

International Nuclear Information System (INIS)

Jan, A.; Muhammad, Z.; Daur, I.; Khan, I.A.

2011-01-01

A field experiment was conducted to evaluate response of barley to mungbean residue (0, 10, 20 and 30 Mg ha/sup -1/), nitrogen levels (0, 25, 50 and 75 kg ha/sup -1/) and their interaction. Emergence m/sup -2/ (50), plant height (109 cm), leaf area tiller-1 (106 cm/sup 2/), lodging score (5.55), termites attack (3.4%), grains spike-1 (67), biological yield (12.80 Mg ha/sup -1/) and grain yield (2.32 Mg ha/sup -1/) were significantly (p=0.05) higher for 30 Mg ha/sup -1/ mungbean residue compared to other levels. Similarly plant height (110 cm), lodging score (5.29) and biological yield (13.75 Mg ha/sup -1/) were higher at 75 kg ha/sup -1/ N compared to other levels of N. Productive tillers m/sup -2/, grains spike/sup -1/, 1000 grain weight, grain yield and harvest index were optimum at 50 kg ha-1 N as compared to 75 kg ha/sup -1/ N that encouraged lodging. Interaction between residue and nitrogen indicated that 10 Mg residue and 50 kg N ha/sup -1/ is recommended to achieve maximum net return under comparable conditions. (author)

Stochastic optimization of a multi-feedstock lignocellulosic-based bioethanol supply chain under multiple uncertainties

International Nuclear Information System (INIS)

Osmani, Atif; Zhang, Jun

2013-01-01

An integrated multi-feedstock (i.e. switchgrass and crop residue) lignocellulosic-based bioethanol supply chain is studied under jointly occurring uncertainties in switchgrass yield, crop residue purchase price, bioethanol demand and sales price. A two-stage stochastic mathematical model is proposed to maximize expected profit by optimizing the strategic and tactical decisions. A case study based on ND (North Dakota) state in the U.S. demonstrates that in a stochastic environment it is cost effective to meet 100% of ND's annual gasoline demand from bioethanol by using switchgrass as a primary and crop residue as a secondary biomass feedstock. Although results show that the financial performance is degraded as variability of the uncertain parameters increases, the proposed stochastic model increasingly outperforms the deterministic model under uncertainties. The locations of biorefineries (i.e. first-stage integer variables) are insensitive to the uncertainties. Sensitivity analysis shows that “mean” value of stochastic parameters has a significant impact on the expected profit and optimal values of first-stage continuous variables. Increase in level of mean ethanol demand and mean sale price results in higher bioethanol production. When mean switchgrass yield is at low level and mean crop residue price is at high level, all the available marginal land is used for switchgrass cultivation. - Highlights: • Two-stage stochastic MILP model for maximizing profit of a multi-feedstock lignocellulosic-based bioethanol supply chain. • Multiple uncertainties in switchgrass yield, crop residue purchase price, bioethanol demand, and bioethanol sale price. • Proposed stochastic model outperforms the traditional deterministic model under uncertainties. • Stochastic parameters significantly affect marginal land allocation for switchgrass cultivation and bioethanol production. • Location of biorefineries is found to be insensitive to the stochastic environment

Security of supply in Competitive Electricity Markets. Conference proceedings

International Nuclear Information System (INIS)

2005-06-01

A stable and reliable electricity supply is a fundamental factor in our modern economy and many people think that the deregulated market is a threat to this - or at least, they think that there is a need for a new type of regulation. Others believe that the threat to security of supply comes from short sighted politicians rather than from competitive markets. Regulation in order to increase security of supply is a threat to well functioning competitive markets - not the other way around. To give an overview of different regulatory models and to discuss each model's particular pros and cons, ELFORSK (Swedish Electrical Utilities RandD Company) on behalf of the Swedish electricity industry, the national grid company Svenska Kraftnaet and the Regulating Authority has arranged this two-day Conference. This conference once again gathers people from many different parts of the world to exchange ideas and experiences from their respective area of operations. Our belief is that people from the industry, the governments as well as from the academic world will find these two days a useful opportunity to build new relationships and gain new insights into the topics covered. There are three main topics for the Conference: Experiences from Different Markets; The Value of Security of Supply; Ongoing research projects. The members of the Conference Committee are impressed by the quality of the papers presented at this Conference and we believe that this is a source of knowledge that will influence decisions makers in many countries. (11 papers presented at the conference have been indexed separately. Powerpoint presentations have not been indexed but are available from the Market Design homrpage)

Residue levels of molinate in rice field soil: their effects on populations of aquatic flora and fauna under recycling and non-recycling practices in the MUDA area

International Nuclear Information System (INIS)

Nashriyah Mat; Azimahtol Hawariah Lope Pihie

2002-01-01

A study to evaluate the effects of Molinate residue levels in rice field soil on populations of weed and aquatic fauna in the recycling and the non-recycling areas of Muda was carried out. Molinate residue levels in soil, Simpson Index of Diversity and Importance Value (IV) of weeds, and Sequential Comparison Index of aquatic fauna were measured. No marked variation between the recycled (B 111) and non-recycled (D 111) area was observed for the population parameters and residue levels measured. (Author)

Functional region prediction with a set of appropriate homologous sequences-an index for sequence selection by integrating structure and sequence information with spatial statistics

Science.gov (United States)

2012-01-01

Background The detection of conserved residue clusters on a protein structure is one of the effective strategies for the prediction of functional protein regions. Various methods, such as Evolutionary Trace, have been developed based on this strategy. In such approaches, the conserved residues are identified through comparisons of homologous amino acid sequences. Therefore, the selection of homologous sequences is a critical step. It is empirically known that a certain degree of sequence divergence in the set of homologous sequences is required for the identification of conserved residues. However, the development of a method to select homologous sequences appropriate for the identification of conserved residues has not been sufficiently addressed. An objective and general method to select appropriate homologous sequences is desired for the efficient prediction of functional regions. Results We have developed a novel index to select the sequences appropriate for the identification of conserved residues, and implemented the index within our method to predict the functional regions of a protein. The implementation of the index improved the performance of the functional region prediction. The index represents the degree of conserved residue clustering on the tertiary structure of the protein. For this purpose, the structure and sequence information were integrated within the index by the application of spatial statistics. Spatial statistics is a field of statistics in which not only the attributes but also the geometrical coordinates of the data are considered simultaneously. Higher degrees of clustering generate larger index scores. We adopted the set of homologous sequences with the highest index score, under the assumption that the best prediction accuracy is obtained when the degree of clustering is the maximum. The set of sequences selected by the index led to higher functional region prediction performance than the sets of sequences selected by other sequence

Dual Rate Adaptive Control for an Industrial Heat Supply Process Using Signal Compensation Approach

Energy Technology Data Exchange (ETDEWEB)

Chai, Tianyou; Jia, Yao; Wang, Hong; Su, Chun-Yi

2017-07-09

The industrial heat supply process (HSP) is a highly nonlinear cascaded process which uses a steam valve opening as its control input, the steam flow-rate as its inner loop output and the supply water temperature as its outer loop output. The relationship between the heat exchange rate and the model parameters, such as steam density, entropy, and fouling correction factor and heat exchange efficiency are unknown and nonlinear. Moreover, these model parameters vary in line with steam pressure, ambient temperature and the residuals caused by the quality variations of the circulation water. When the steam pressure and the ambient temperature are of high values and are subjected to frequent external random disturbances, the supply water temperature and the steam flow-rate would interact with each other and fluctuate a lot. This is also true when the process exhibits unknown characteristic variations of the process dynamics caused by the unexpected changes of the heat exchange residuals. As a result, it is difficult to control the supply water temperature and the rates of changes of steam flow-rate well inside their targeted ranges. In this paper, a novel compensation signal based dual rate adaptive controller is developed by representing the unknown variations of dynamics as unmodeled dynamics. In the proposed controller design, such a compensation signal is constructed and added onto the control signal obtained from the linear deterministic model based feedback control design. Such a compensation signal aims at eliminating the unmodeled dynamics and the rate of changes of the currently sample unmodeled dynamics. A successful industrial application is carried out, where it has been shown that both the supply water temperature and the rate of the changes of the steam flow-rate can be controlled well inside their targeted ranges when the process is subjected to unknown variations of its dynamics.

Influence of organic waste and residue mud additions on chemical, physical and microbial properties of bauxite residue sand.

Science.gov (United States)

Jones, Benjamin E H; Haynes, Richard J; Phillips, Ian R

2011-02-01

wet sieving, was greatest where poultry manure was applied. Although total organic C and soluble organic C were greater in biosolids than poultry manure treatments, the reverse was the case for microbial biomass C and basal respiration. In the biosolids and poultry manure treatments, increasing residue mud additions tended to increase soluble C, microbial biomass C and basal respiration. Germination index of watercress was highest in control samples and reduced by additions of biosolids and poultry manure which was attributed to the high EC and possibly high extractable P and NH (4) (+) . The concurrent addition of residue mud and organic wastes can improve chemical, microbial and particularly physical properties of residue sand. Future research should include neutralisation of the mud (e.g. with gypsum) and subsequent leaching to remove salts originating from both the mud and organic wastes.

Development Of A Permanent Magnet Residual Gas Profile Monitor With Fast Readout

CERN Document Server

Barabin, S; Giacomini, T; Liakin, D; Orlov, A; Skachkov, V S

2004-01-01

The beam profile measurements at modern ion synchrotrons and storage rings require high timing performances on a turn-by-turn basis. On the other hand, high spatial resolutions are very desirable for cooled beams. We are developing a residual gas monitor to cover the wide range of beam intensities and dimensions. It supplies the needed high-resolution and high-speed tools for beam profiling. The new residual gas monitor will operate on scattered residual gas electrons whose trajectories are localized within 0.1 mm filaments by using appropriate magnetic field. The required magnetic field of 100 mT will be excited by either a permanent or an electromagnet. The high resolution mode of 0.1 mm is provided by a CCD camera with upstream MCP-phosphor screen assembly. In the fast turn-by-turn mode the beam profile will be read out with a resolution of 1 mm by a 100-channel photodiode-amplifier-digitizer, which will be explained in detail.

MODEL BASED BIOMASS SYSTEM DESIGN OF FEEDSTOCK SUPPLY SYSTEMS FOR BIOENERGY PRODUCTION

Energy Technology Data Exchange (ETDEWEB)

David J. Muth, Jr.; Jacob J. Jacobson; Kenneth M. Bryden

2013-08-01

Engineering feedstock supply systems that deliver affordable, high-quality biomass remains a challenge for the emerging bioenergy industry. Cellulosic biomass is geographically distributed and has diverse physical and chemical properties. Because of this feedstock supply systems that deliver cellulosic biomass resources to biorefineries require integration of a broad set of engineered unit operations. These unit operations include harvest and collection, storage, preprocessing, and transportation processes. Design decisions for each feedstock supply system unit operation impact the engineering design and performance of the other system elements. These interdependencies are further complicated by spatial and temporal variances such as climate conditions and biomass characteristics. This paper develops an integrated model that couples a SQL-based data management engine and systems dynamics models to design and evaluate biomass feedstock supply systems. The integrated model, called the Biomass Logistics Model (BLM), includes a suite of databases that provide 1) engineering performance data for hundreds of equipment systems, 2) spatially explicit labor cost datasets, and 3) local tax and regulation data. The BLM analytic engine is built in the systems dynamics software package PowersimTM. The BLM is designed to work with thermochemical and biochemical based biofuel conversion platforms and accommodates a range of cellulosic biomass types (i.e., herbaceous residues, short- rotation woody and herbaceous energy crops, woody residues, algae, etc.). The BLM simulates the flow of biomass through the entire supply chain, tracking changes in feedstock characteristics (i.e., moisture content, dry matter, ash content, and dry bulk density) as influenced by the various operations in the supply chain. By accounting for all of the equipment that comes into contact with biomass from the point of harvest to the throat of the conversion facility and the change in characteristics, the

Policy implications of the GRI baseline projection of U.S. energy supply and demand to 2010, 1992

International Nuclear Information System (INIS)

1992-01-01

The 1992 Edition of the GRI Baseline Projection of U.S. Energy Supply and Demand is summarized. Three broad implications concerning the future of the natural gas industry are highlighted: the residual impact of the August 1990 Gulf War on crude oil prices and the factors influencing the long-term price path, the impact of the growing number of environmental constraints on future energy use, and the effect of recent developments in gas production on future gas supply and price

Mapping and quantification of organic agro-industrial residues in East Africa

Energy Technology Data Exchange (ETDEWEB)

Jungersen, G. [Dansk Teknologisk Inst. (Denmark); Kivaisi, A.; Rubindamayugi, M. [Univ. of Dar es Salaam (Tanzania, United Republic of)

1998-05-01

The East-African agro-industries generate very large quantities of organic residues from production and processing of different crops. These residues form a major contribution to the pollution of air, soil and water ways, but, at the same time they constitute a large potential for production of bioenergy through anaerobic digestion as well as potential substrate for other biological fermentation processes. The utilization of these resources for production of valuable products would contribute significantly to: Improvement of the local energy supply, through production of bio-energy; Improvement of the economy of the East African agro-industry; Reduction of the environmental impact from the agro-industrial sector. Except for production of cane sugar, most agro-industrial residues are generated from cash crops, which are produced and processed in the developing countries and where the final products mainly are used for export. In the East-African Region the most important of these crops are: Sisal, coffee, Cashew nuts and Pineapple. In addition significant quantities of organic residues are generated from other food processing activities like breweries, consumption of bananas etc. The total potential methane production of the residues available for use in biomethanization systems in East Africa is 189.61 million m{sup 3} of methane per year. Converted to diesel oil equivalents and including the residues only feasible for combustion systems, the total bioenergy potential of agro-industrial residues in Eastern Africa is 279,176 TOE. If this potential was fully utilized for production of electricity, it would correspond to installed effects of 37,68 and 31 MW in Tanzania, Kenya and Uganda, respectively, equivalent to 10%, 11% and 18% of the currently installed effect is these countries. Residues from sisal and coffee processing constitute the main part of the bioenergy potential, on average approximately 75%, while the remaining 25% of the potential are formed by the

Coil occlusion of residual shunts after surgical closure of patent ductus arteriosus.

Science.gov (United States)

Fujii, Yoko; Keene, Bruce W; Mathews, Kyle G; Atkins, Clarke E; Defrancesco, Teresa C; Hardie, Elizabeth M; Wakao, Yoshito

2006-12-01

OBJECTIVE; To describe use of coil embolization to occlude residual flow through a patent ductus arteriosus (PDA) after incomplete surgical ligation. Clinical study. Dogs (n=4) with continuous murmur after surgical ligation of PDA. After PDA ligation, residual ductal flow through the PDA was visible on color-flow Doppler examination and left ventricular end-diastolic diameter remained increased. Coil embolization by an arterial approach was performed to achieve complete occlusion of the PDA. Embolization coils were delivered without complications and hemodynamically successful occlusion was achieved. Doppler-visible flow resolved in 2 dogs within 3 months after embolization. Left ventricular end-diastolic diameter indexed to body weight decreased in all dogs. Transcatheter coil embolization appears to be a safe and minimally invasive procedure for complete occlusion of residual PDA flow after incomplete surgical ligation. Transcatheter coil embolization should be considered for correction of hemodynamically significant residual shunts in dogs that have incomplete PDA occlusion after open surgical ligation.

Clinical Significance of the Edema Index in Incident Peritoneal Dialysis Patients

OpenAIRE

Kang, Seok Hui; Choi, Eun Woo; Park, Jong Won; Cho, Kyu Hyang; Do, Jun Young

2016-01-01

Background Proper monitoring for volume overload is important to improve prognosis in peritoneal dialysis (PD) patients. The association between volume status and residual renal function (RRF) remains an unresolved issue. The aim of the present study was to evaluate the association between the edema index and survival or RRF in incident PD patients. Patients and Methods We identified all adults who underwent PD. The edema index was defined as the ratio of extracellular fluid to total body flu...

Hazard Classification for Fuel Supply Shutdown Facility

International Nuclear Information System (INIS)

BENECKE, M.W.

2000-01-01

Final hazard classification for the 300 Area N Reactor fuel storage facility resulted in the assignment of Nuclear Facility Hazard Category 3 for the uranium metal fuel and feed material storage buildings (303-A, 303-B, 303-G, 3712, and 3716). Radiological for the residual uranium and thorium oxide storage building and an empty former fuel storage building that may be used for limited radioactive material storage in the future (303-K/3707-G, and 303-E), and Industrial for the remainder of the Fuel Supply Shutdown buildings (303-F/311 Tank Farm, 303-M, 313-S, 333, 334 and Tank Farm, 334-A, and MO-052)

Safeguards By Design - As applied to the Sellafield Product and Residue Store (SPRS)

Energy Technology Data Exchange (ETDEWEB)

Chare, Peter; Lahogue, Yves; Schwalbach, Peter; Smejkal, Andreas; Patel, Bharat [European Commission, Directorate-General for Energy, Directorate E - Nuclear Safeguards, Euroforum, Luxembourg (Luxembourg)

2011-12-15

Sellafield Product and Residue Store (SPRS) is a new facility that has been constructed on the site of Sellafield. The design work started in early 2001 and active commissioning commenced with the introduction of the first nuclear material which arrived in the building early 2011. The store has been designed for the long term storage of Plutonium product (PuO2) from Thorp and Magnox, MOX residue powder from Sellafield MOX Plant (SMP) as well as pellet, powder or granular PuO2 residues from the older stores on the Sellafield site. This paper describes the application of Safeguards By Design commencing at the early design stage based upon the Safeguards Approach to be applied by DG ENER at the Sellafield Product and Residue Store (SPRS). The approach had been developed based upon the requirements for implementing Commission Regulation 302(2005) and the technical measures to be implemented in order to meet Article 77(a) of the Euratom Treaty. In order to meet these requirements a close dialogue was established between the different interested parties and the design team for the installation of instrumentation with associated cabling in order to implement the agreed safeguards measures. Early contacts at the design stage facilitated the inclusion of installed safeguards supplied instrumentation into the overall design and facility construction. The equipment and cabling supplied by Euratom was incorporated into the planning and construction phases. This ensured that upon plant completion the safeguards tools were commissioned and ready for the verification of the first nuclear material to be introduced into SPRS. Detailed discussions at the early stages of the design phase raised the profile of nuclear material safeguards and made certain that the necessary instrumentation infrastructure was incorporated into the plant infrastructure.

Cycling of fertilizer and cotton crop residue nitrogen

International Nuclear Information System (INIS)

Rochester, I.J.; Constable, G.A.; MacLeod, D.A.

1993-01-01

Mineral nitrogen (N), nitrate and ammonium contents were monitored in N-fertilized soils supporting cotton crops to provide information on the nitrification, mineralization and immobilization processes operating in the soil. The relative contributions of fertilizer N, previous cotton crop residue N and indigenous soil N to the mineral N pools and to the current crop's N uptake were calculated. After N fertilizer (urea) application, the soil's mineral N content rose rapidly and subsequently declined at a slower rate. The recovery of 15 N-labelled urea as mineral N declined exponentially with time. Biological immobilization (and possibly denitrification to some extent) were believed to be the major processes reducing post-application soil mineral N content. Progressively less N was mineralized upon incubation of soil sampled through the growing season. Little soil N (either from urea or crop residue) was mineralized at crop maturity. Cycling of N was evident between the soil mineral and organic N pools throughout the cotton growing season. Considerable quantities of fertilizer N were immobilized by the soil micro biomass; immobilized N was remineralized and subsequently taken up by the cotton crop. A large proportion of the crop N was taken up in the latter part of the season when the soil mineral N content was low. It is suggested that much of the N taken up by cotton was derived from microbial sources, rather than crop residues. The application of cotton crop residue (stubble) slightly reduced the mineral N content in the soil by encouraging biological immobilization. 15 N was mineralized very slowly from the labelled crop residue and did not contribute significantly to the supply of N to the current crop. Recovery of labelled fertilizer N and labelled crop residue N by the cotton crop was 28% and 1%, respectively. In comparison, the apparent recovery of fertilizer N was 48%. Indigenous soil N contributed 68% of the N taken up by the cotton crop. 33 refs., 1 tab

Research on the performance evaluation of agricultural products supply chain integrated operation

Science.gov (United States)

Jiang, Jiake; Wang, Xifu; Liu, Yang

2017-04-01

The agricultural product supply chain integrated operation can ensure the quality and efficiency of agricultural products, and achieve the optimal goal of low cost and high service. This paper establishes a performance evaluation index system of agricultural products supply chain integration operation based on the development status of agricultural products and SCOR, BSC and KPI model. And then, we constructing rough set theory and BP neural network comprehensive evaluation model with the aid of Rosetta and MATLAB tools and the case study is about the development of agricultural products integrated supply chain in Jing-Jin-Ji region. And finally, we obtain the corresponding performance results, and give some improvement measures and management recommendations to the managers.

Pencil kernel correction and residual error estimation for quality-index-based dose calculations

International Nuclear Information System (INIS)

Nyholm, Tufve; Olofsson, Joergen; Ahnesjoe, Anders; Georg, Dietmar; Karlsson, Mikael

2006-01-01

Experimental data from 593 photon beams were used to quantify the errors in dose calculations using a previously published pencil kernel model. A correction of the kernel was derived in order to remove the observed systematic errors. The remaining residual error for individual beams was modelled through uncertainty associated with the kernel model. The methods were tested against an independent set of measurements. No significant systematic error was observed in the calculations using the derived correction of the kernel and the remaining random errors were found to be adequately predicted by the proposed method

The Relationship between Macroeconomic Variables and ISE Industry Index

Directory of Open Access Journals (Sweden)

Ahmet Ozcan

2012-01-01

Full Text Available In this study, the relationship between macroeconomic variables and Istanbul Stock Exchange (ISE industry index is examined. Over the past years, numerous studies have analyzed these relationships and the different results obtained from these studies have motivated further research. The relationship between stock exchange index and macroeconomic variables has been well documented for the developed markets. However, there are few studies regarding the relationship between macroeconomic variables and stock exchange index for the developing markets. Thus, this paper seeks to address the question of whether macroeconomic variables have a significant relationship with ISE industry index using monthly data for the period from 2003 to 2010. The selected macroeconomic variables for the study include interest rates, consumer price index, money supply, exchange rate, gold prices, oil prices, current account deficit and export volume. The Johansen’s cointegration test is utilized to determine the impact of selected macroeconomic variables on ISE industry index. The result of the Johansen’s cointegration shows that macroeconomic variables exhibit a long run equilibrium relationship with the ISE industry index.

Determination and evaluation of effective criteria to location selection the optimal for establishing fluting paper mills from agricultural residues of Mazandaran province

Directory of Open Access Journals (Sweden)

Abdollah barimani

2013-11-01

Full Text Available Location selection for factory competitiveness in the market place plays an important role and should be chosen so that will leads achievement of the strategic advantages compared with other competitors. The objective of this study was determination of the effective criteria for decision making to select the most suitable location for establishing a fluting paper mills from agricultural residues. For this purpose, effective criteria were divided into five major groups: Material and Product, Facilities and limitations of regional (infrastructure, Technical and Human, Economical, Rules & Regulations as well as 33 sub-criteria, after preliminary investigation, preparatory observation, and an interview with some of the paper producers and relevant experts. A hierarchy was designed based on five major groups of criteria and then the priority rates of obtained criteria and sub-criteria were determined by Analytical Hierarchy Process (AHP after compiling expert's opinions via questionnaire. Results have shown that among 33 determined effective criteria in location selection of fluting paper mills from agricultural residues , the sub-criteria of Supply residual amount, Ensure the supply of residual, Cost purchasing of raw material, Cost of transporting raw material have the highest priorities, respectively

Modeling Philippine Stock Exchange Composite Index Using Time Series Analysis

Science.gov (United States)

Gayo, W. S.; Urrutia, J. D.; Temple, J. M. F.; Sandoval, J. R. D.; Sanglay, J. E. A.

2015-06-01

This study was conducted to develop a time series model of the Philippine Stock Exchange Composite Index and its volatility using the finite mixture of ARIMA model with conditional variance equations such as ARCH, GARCH, EG ARCH, TARCH and PARCH models. Also, the study aimed to find out the reason behind the behaviorof PSEi, that is, which of the economic variables - Consumer Price Index, crude oil price, foreign exchange rate, gold price, interest rate, money supply, price-earnings ratio, Producers’ Price Index and terms of trade - can be used in projecting future values of PSEi and this was examined using Granger Causality Test. The findings showed that the best time series model for Philippine Stock Exchange Composite index is ARIMA(1,1,5) - ARCH(1). Also, Consumer Price Index, crude oil price and foreign exchange rate are factors concluded to Granger cause Philippine Stock Exchange Composite Index.

Long-chain n-3 PUFA supplied by the usual diet decrease plasma stearoyl-CoA desaturase index in non-hypertriglyceridemic older adults at high vascular risk.

Science.gov (United States)

Pérez-Heras, Ana M; Mayneris-Perxachs, Jordi; Cofán, Montserrat; Serra-Mir, Mercè; Castellote, Ana I; López-Sabater, Carmen; Fitó, Montserrat; Salas-Salvadó, Jordi; Martínez-González, Miguel-Ángel; Corella, Dolores; Estruch, Ramon; Ros, Emilio; Sala-Vila, Aleix

2018-02-01

The activity of stearoyl-CoA desaturase-1 (SCD1), the central enzyme in the synthesis of monounsaturated fatty acids (MUFA), has been associated with de novo lipogenesis. In experimental models SCD1 is down-regulated by polyunsaturated fatty acids (PUFA), but clinical studies are scarce. The effect of long-chain n-3 PUFA (LCn-3PUFA) supplied by the regular diet, in the absence of fatty fish or fish oil supplementation, remains to be explored. We related 1-y changes in plasma SCD1 index, as assessed by the C16:1n-7/C16:0 ratio, to both adiposity traits and nutrient intake changes in a sub-cohort (n = 243) of non-hypertriglyceridemic subjects of the PREDIMED (PREvención con DIeta MEDiterranea) trial. After adjustment for confounders, including changes in fasting triglycerides, plasma SCD1 index increased in parallel with body weight (0.221 [95% confidence interval, 0.021 to 0.422], P = 0.031) and BMI (0.115 [0.027 to 0.202], P = 0.011). Additionally, dietary LCn-3PUFA (but not MUFA or plant-derived PUFA) were associated with decreased plasma SCD1 index (-0.544 [-1.044 to -0.043], P = 0.033, for each 1 g/d-increase in LCn-3PUFA). No associations were found for other food groups, but there was a trend for fatty fish intake (-0.083 [-0.177 to 0.012], P = 0.085, for each 10 g/d-increase). Our data add clinical evidence on the down-regulation of plasma SCD1 index by LCn-3PUFA in the context of realistic changes in fish consumption in the customary, non-supplemented diet. http://www.Controlled-trials.com/ISRCTN35739639. Copyright © 2016 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

How the reverse supply chain contributes to a firm’s competitive strategy: a strategic alignment perspective

DEFF Research Database (Denmark)

Larsen, Samuel Brüning; Masi, Donato; Jacobsen, Peter

2017-01-01

The ongoing transition to a Circular Economy is changing the shape of Supply Chains. They are becoming more ‘Closed-Loop’, combining forward and reverse flows of products and materials. Reverse Supply Chains (RSCs), originally considered as a solution for handling waste or recovering residual value...... seven case studies, focusing on original equipment manufacturers (OEMs), show how the RSC can play a strategic, tactical, or operational role for the firm. The paper applies for the first time the concept of strategic alignment to the RSC and practitioners can use the proposed framework to analyse...

[Waterborne outbreak of gastroenteritis transmitted through the public water supply].

Science.gov (United States)

Godoy, P; Borrull, C; Palà, M; Caubet, I; Bach, P; Nuín, C; Espinet, L; Torres, J; Mirada, G

2003-01-01

The chlorination of public water supplies has led researchers to largely discard drinking water as a potential source of gastroenteritis outbreaks. The aim of this study was to investigate an outbreak of waterborne disease associated with drinking water from public supplies. A historical cohort study was carried out following notification of a gastroenteritis outbreak in Baqueira (Valle de Arán, Spain). We used systematic sampling to select 87 individuals staying at hotels and 67 staying in apartments in the target area. Information was gathered on four factors (consumption of water from the public water supply, sandwiches, water and food in the ski resorts) as well as on symptoms. We assessed residual chlorine in drinking water, analyzed samples of drinking water, and studied stool cultures from 4 patients. The risk associated with each water source and food type was assessed by means of relative risk (RR) and 95% confidence intervals (CI). The overall attack rate was 51.0% (76/149). The main symptoms were diarrhea 87.5%, abdominal pain 80.0%, nausea 50.7%, vomiting 30.3%, and fever 27.0%. The only factor associated with a statistically significant risk of disease was consumption of drinking water (RR = 11.0; 95% CI, 1.6-74.7). No residual chlorine was detected in the drinking water, which was judged acceptable. A problem associated with the location of the chlorinator was observed and corrected. We also recommended an increase in chlorine levels, which was followed by a reduction in the number of cases. The results of stool cultures of the four patients were negative for enterobacteria. This study highlights the potential importance of waterborne outbreaks of gastroenteritis transmitted through drinking water considered acceptable and suggests the need to improve microbiological research into these outbreaks (viruses and protozoa detection).

Detecting changes in rainfall pattern and seasonality index vis-`a-vis ...

Indian Academy of Sciences (India)

index vis-`a-vis increasing water scarcity in Maharashtra ... in the district scale are identified by trend analysis of rainfall time series. ... for better disaster management and water resource ..... productivity and irrigation water supply in the con-.

Economy of wood supply

International Nuclear Information System (INIS)

Imponen, V.

1993-01-01

Research and development of wood fuels production was vigorous in the beginning of the 1980's. Techniques and working methods used in combined harvesting and transportation of energy and merchantable wood were developed in addition to separate energy wood delivery. After a ten year silent period the research on this field was started again. At present the underutilization of forest supplies and the environmental effects of energy production based on fossil fuels caused the rebeginning of the research. One alternative for reduction of the price of wood fuels at the utilization site is the integration of energy and merchantable wood deliveries together. Hence the harvesting and transportation devices can be operated effectively, and the organizational costs are decreased as well. The wood delivery costs consist of the stumpage price, the harvesting and transportation costs, and of general expenses. The stumpage price form the largest cost category (over 50 %) of the industrial merchantable wood delivery, and the harvesting and transportation costs in the case of thinningwood delivery. Forest transportation is the largest part of the delivery costs of logging residues. The general expenses, consisting of the management costs and the interest costs of the capital bound to the storages, form a remarkable cost category in delivery of low-rank wood for energy or conversion purposes. The costs caused by the harvesting of thinningwood, the logging residues, chipping and crushing, the lorry transportation are reviewed in this presentation

Incorporating social benefits in multi-objective optimization of forest-based bioenergy and biofuel supply chains

International Nuclear Information System (INIS)

Cambero, Claudia; Sowlati, Taraneh

2016-01-01

Highlights: • Quantified social benefits of forest- based biomass supply chain. • Developed multi-objective optimization model. • Incorporated social benefits into multi-objective model. • Solved the model using the AUGMECON method. • Applied the model to a case study in Canada. - Abstract: Utilization of forest and wood residues to produce bioenergy and biofuels could generate additional revenue streams for forestry companies, reduce their environmental impacts and generate new development opportunities for forest-dependent communities. Further development of forest-based biorefineries entails addressing complexities and challenges related to biomass procurement, logistics, technologies, and sustainability. Numerous optimization models have been proposed for the economic and environmental design of biomass-to-bioenergy or biofuel supply chains. A few of them also maximized the job creation potential of the supply chain through the use of employment multipliers. The use of a total job creation indicator as the social optimization objective implies that all new jobs generate the same level of social benefit. In this paper, we quantify the potential social benefit of new forest-based biorefinery supply chains considering different impacts of new jobs based on their type and location. This social benefit is incorporated into a multi-objective mixed integer linear programming model that maximizes the social benefit, net present value and greenhouse gas emission saving potential of a forest-based biorefinery supply chain. The applicability of the model is illustrated through a case study in the interior region of British Columbia, Canada where different utilization paths for available forest and wood residues are investigated. The multi-objective optimization model is solved using a Pareto-generating method. The analysis of the generated set of Pareto-optimal solutions show a trade-off between the net present value of the supply chain and the other two

Development of a biorefinery optimized biofuel supply curve for the Western United States

International Nuclear Information System (INIS)

Parker, Nathan; Tittmann, Peter; Hart, Quinn; Nelson, Richard; Skog, Ken; Schmidt, Anneliese; Gray, Edward; Jenkins, Bryan

2010-01-01

A resource assessment and biorefinery siting optimization model was developed and implemented to assess potential biofuel supply across the Western United States from agricultural, forest, urban, and energy crop biomass. Spatial information including feedstock resources, existing and potential refinery locations and a transportation network model is provided to a mixed integer-linear optimization model that determines the optimal locations, technology types and sizes of biorefineries to satisfy a maximum profit objective function applied across the biofuel supply and demand chain from site of feedstock production to the product fuel terminal. The resource basis includes preliminary considerations of crop and residue sustainability. Sensitivity analyses explore possible effects of policy and technology changes. At a target market price of 19.6 $ GJ -1 , the model predicts a feasible production level of 610-1098 PJ, enough to supply up to 15% of current regional liquid transportation fuel demand. (author)

Residual coal exploitation and its impact on sustainable development of the coal industry in China

International Nuclear Information System (INIS)

Zhang, Yujiang; Feng, Guorui; Zhang, Min; Ren, Hongrui; Bai, Jinwen; Guo, Yuxia; Jiang, Haina; Kang, Lixun

2016-01-01

Although China owns large coal reserves, it now faces the problem of depletion of its coal resources in advance. The coal-based energy mix in China will not change in the short term, and a means of delaying the coal resources depletion is therefore urgently required. The residual coal was exploited first with a lower recovery percentage and was evaluated as commercially valuable damaged coal. This approach is in comparison to past evaluations when the residual coal was allocated as exploitation losses. Coal recovery rates, the calculation method of residual coal reserves and statistics of its mines in China were given. On this basis, a discussion concerning the impacts on the delay of China's coal depletion, development of coal exploitation and sustainable developments, as well as technologies and relevant policies, were presented. It is considered that the exploitation of residual coal can effectively delay China's coal depletion, inhibit the construction of new mines, redress the imbalance between supply and demand of coal in eastern China, improve the mining area environment and guarantee social stability. The Chinese government supports the exploitation technologies of residual coal. Hence, exploiting residual coal is of considerable importance in sustainable development of the coal industry in China. - Highlights: •Pay attention to residual coal under changing energy-mix environment in China. •Estimate residual coal reserves and investigate its exploitation mines. •Discuss impacts of residual coal exploitation on delay of coal depletion in China. •Discuss impacts on coal mining industry and residual coal exploitation technology. •Give corresponding policy prescriptions.

THE INFLUENCE OF GRINDING CONDITIONS ON THE DISTRIBUTION OF RESIDUAL STRESS IN THE SURFACE LAYER OF 17crni6-6 STEEL AFTER CARBURIZING

Directory of Open Access Journals (Sweden)

Jacek Sawicki

2017-06-01

Full Text Available This paper presents the results of a study aimed at determining the residual stress which results from developing the surface layer by low-pressure and conventional carburizing and grinding of 17CrNi6-6 steel. A synergistic effect of thermochemical and abrasive treatment was examined on ring samples used to study residual stress by Davidenkov’s method. Samples were subjected to vacuum carburizing and conventional carburizing, which was followed by grinding with a 38A60K8V aloxite grinding wheel and a CBN grinding wheel - RNB80/63B75V. The following cutting fluids were used during the grinding process: oil emulsion 5%, supply rate ca. 20 l/min, Micro5000 oil supplied at the minimum quantity lubrication (MQL of ca. 25 ml/h, dry machining. The study determined the effect of the type of grinding wheel and the cooling and lubricating agent on the distribution of residual stress in the sur-face layer. The best effects of grinding with respect to the residual stress were achieved with flood cooling with oil emulsion and grinding with a CBN grinding wheel.

Optimizing Biomass Feedstock Logistics for Forest Residue Processing and Transportation on a Tree-Shaped Road Network

Directory of Open Access Journals (Sweden)

Hee Han

2018-03-01

Full Text Available An important task in forest residue recovery operations is to select the most cost-efficient feedstock logistics system for a given distribution of residue piles, road access, and available machinery. Notable considerations include inaccessibility of treatment units to large chip vans and frequent, long-distance mobilization of forestry equipment required to process dispersed residues. In this study, we present optimized biomass feedstock logistics on a tree-shaped road network that take into account the following options: (1 grinding residues at the site of treatment and forwarding ground residues either directly to bioenergy facility or to a concentration yard where they are transshipped to large chip vans, (2 forwarding residues to a concentration yard where they are stored and ground directly into chip vans, and (3 forwarding residues to a nearby grinder location and forwarding the ground materials. A mixed-integer programming model coupled with a network algorithm was developed to solve the problem. The model was applied to recovery operations on a study site in Colorado, USA, and the optimal solution reduced the cost of logistics up to 11% compared to the conventional system. This is an important result because this cost reduction propagates downstream through the biomass supply chain, reducing production costs for bioenergy and bioproducts.

Laboratory evaluation of particle size, food contamination, and residual efficacy of pyrethrin + methoprene aerosol

Science.gov (United States)

A series of tests were conducted to determine residual efficacy of pyrethrin+methoprene aerosol to manage larvae of selected stored product insects. Efficacy was assessed through emergence of morphologically-normal adults and through a quantitative developmental index with values ranging from 1, for...

Sustainable and Resilient Garment Supply Chain Network Design with Fuzzy Multi-Objectives under Uncertainty

Directory of Open Access Journals (Sweden)

Sonia Irshad Mari

2016-10-01

Full Text Available Researchers and practitioners are taking more interest in developing sustainable garment supply chains in recent times. On the other hand, the supply chain manager drops sustainability objectives while coping with unexpected natural and man-made disruption risks. Hence, supply chain managers are now trying to develop sustainable supply chains that are simultaneously resilient enough to cope with disruption risks. Owing to the importance of the considered issue, this study proposed a network optimization model for a sustainable and resilient supply chain network by considering sustainability via embodied carbon footprints and carbon emissions and resilience by considering resilience index. In this paper, initially, a possibilistic fuzzy multi-objective sustainable and resilient supply chain network model is developed for the garment industry considering economic, sustainable, and resilience objectives. Secondly, a possibilistic fuzzy linguistic weight-based interactive solution method is proposed. Finally, a numerical case example is presented to show the applicability of the proposed model and solution methodology.

An estimation of cogeneration potential by using refinery residuals in Mexico

International Nuclear Information System (INIS)

Marin-Sanchez, J.E.; Rodriguez-Toral, M.A.

2007-01-01

Electric power generation in Mexico is mainly based on fossil fuels, specifically heavy fuel oil, although the use of natural gas combined cycles (NGCC) is becoming increasingly important. This is the main destination that has promoted growing imports of natural gas, currently accounting for about 20% of the total national annual consumption. Available crude oil is becoming heavier; thus refineries should be able to process it, and to handle greater quantities of refinery residuals. If all refinery residuals are used in cogeneration plants serving petroleum refineries, the high heat/power ratio of refinery needs, leads to the availability of appreciable quantities of electricity that can be exported to the public utility. Thus, in a global perspective, Mexican imports of natural gas may be reduced by cogeneration using refinery residuals. This is not the authors' idea; in fact, PEMEX, the national oil company, has been entitled by the Mexican congress to sell its power leftovers to The Federal Electricity Commission (CFE) in order to use cogeneration in the way described for the years to come. A systematic way of determining the cogeneration potential by using refinery residuals from Mexican refineries is presented here, taking into account residual quantities and composition, from a national perspective, considering expected scenarios for Maya crude content going to local refineries in the years to come. Among different available technologies for cogeneration using refinery residuals, it is believed that the integrated gasification combined cycle (IGCC) would be the best option. Thus, considering IGCC plants supplying heat and power to refineries where it is projected to have refinery residuals for cogeneration, the expected electric power that can be sent to the public utility is quantified, along with the natural gas imports mitigation that may be attained. This in turn would contribute to a necessary fuel diversification policy balancing energy, economy and

Characterization of protein and carbohydrate mid-IR spectral features in crop residues

Science.gov (United States)

Xin, Hangshu; Zhang, Yonggen; Wang, Mingjun; Li, Zhongyu; Wang, Zhibo; Yu, Peiqiang

2014-08-01

To the best of our knowledge, a few studies have been conducted on inherent structure spectral traits related to biopolymers of crop residues. The objective of this study was to characterize protein and carbohydrate structure spectral features of three field crop residues (rice straw, wheat straw and millet straw) in comparison with two crop vines (peanut vine and pea vine) by using Fourier transform infrared spectroscopy (FTIR) technique with attenuated total reflectance (ATR). Also, multivariate analyses were performed on spectral data sets within the regions mainly related to protein and carbohydrate in this study. The results showed that spectral differences existed in mid-IR peak intensities that are mainly related to protein and carbohydrate among these crop residue samples. With regard to protein spectral profile, peanut vine showed the greatest mid-IR band intensities that are related to protein amide and protein secondary structures, followed by pea vine and the rest three field crop straws. The crop vines had 48-134% higher spectral band intensity than the grain straws in spectral features associated with protein. Similar trends were also found in the bands that are mainly related to structural carbohydrates (such as cellulosic compounds). However, the field crop residues had higher peak intensity in total carbohydrates region than the crop vines. Furthermore, spectral ratios varied among the residue samples, indicating that these five crop residues had different internal structural conformation. However, multivariate spectral analyses showed that structural similarities still exhibited among crop residues in the regions associated with protein biopolymers and carbohydrate. Further study is needed to find out whether there is any relationship between spectroscopic information and nutrition supply in various kinds of crop residue when fed to animals.

Determination of aluminium and physicochemical parameters in the palm oil estates water supply at Johor, Malaysia.

Science.gov (United States)

Siti Farizwana, M R; Mazrura, S; Zurahanim Fasha, A; Ahmad Rohi, G

2010-01-01

The study was to determine the concentration of aluminium (Al) and study the physicochemical parameters (pH, total dissolved solids (TDS), turbidity, and residual chlorine) in drinking water supply in selected palm oil estates in Kota Tinggi, Johor. Water samples were collected from the estates with the private and the public water supplies. The sampling points were at the water source (S), the treatment plant outlet (TPO), and at the nearest houses (H1) and the furthest houses (H2) from the TPO. All estates with private water supply failed to meet the NSDWQ for Al with mean concentration of 0.99 ± 1.52 mg/L. However, Al concentrations in all public water supply estates were well within the limit except for one estate. The pH for all samples complied with the NSDWQ except from the private estates for the drinking water supply with an acidic pH (5.50 ± 0.90). The private water supply showed violated turbidity value in the drinking water samples (14.2 ± 24.1 NTU). Insufficient amount of chlorination was observed in the private water supply estates (0.09 ± 0.30 mg/L). Private water supplies with inefficient water treatment served unsatisfactory drinking water quality to the community which may lead to major health problems.

Feedstock quality : an important consideration in forest biomass supply

Energy Technology Data Exchange (ETDEWEB)

Ryans, M. [FP Innovations, Vancouver, BC (Canada). FERIC

2009-07-01

The move to forest-based sources of biomass requires an emphasis on the quality of forest residues. Customers set the feedstock requirements, and demand homogeneous and predictable quality. The top quality factors are appropriate moisture content, consistent particle size, chlorine content, and clean material. The seasonal variability of the resource means that suppliers must determine how to deliver a year-round supply with appropriate moisture content. Methods such as pre-piling and covering with a tarp are being tested. Although mills tailored for biomass deliveries have modernized boilers capable of burning a variety of biomass feedstocks at varying moisture contents, a 10 per cent reduction in moisture content can offer a good return on investment because suppliers could transports more energy content and less water per tonne of biomass. This presentation also discussed the range of equipment choices available for delivering the right-sized biomass, and outlined the right and wrong practices that influence biomass quality along the supply chain. figs.

Energetic utilization of residues from wine-growing. Sewage plant Iphofen; Energetische Nutzung von Weinbaureststoffen. Klaeranlage Iphofen

Energy Technology Data Exchange (ETDEWEB)

Steinle, Eberhard; Carozzi, Alvaro [Dr.-Ing. Steinle Ingenieurgesellschaft fuer Abwassertechnik mbH, Weyarn (Germany); Mend, Josef; Kurth, Matthias [Stadt Iphofen (Germany)

2010-09-15

The treatment of waste water from the wine-growing and the treatment of liquid residual substances in local purification plants frequently result in a temporary overloading and disturbances. An innovative drop-off scheme was introduced at the purification plant Iphofen (Federal Republic of Germany). With this drop-off scheme, the winegrowers directly supply the highly concentrated liquid residual substances from the winemaking to the purification plant. There the residual substances can be used for the support of the denitrification and fermentation. After the successful conversion of this system, a gas utilization with small cogeneration units could be installed. Thus the resulting mass of gas will be used to the production of electricity and thermal energy. The authors of the contribution under consideration report on this system approach and on first operational experiences.

Interactive effects of rice residue and water stress on growth and metabolism of wheat seedlings

Directory of Open Access Journals (Sweden)

Nimisha Amist

2014-08-01

Full Text Available In the present study effects of rice residue with and without water stress were studied on Triticum aestivum L. cv. Shatabadi. The mixture of residue and garden soil in 1:1 ratio was considered as 50% (R1 and only decomposed residue as 100% (R2. Garden soil was taken as control. Twenty five seeds were sown in each experimental trays filled with soil mixture according to the treatments. Trays were arranged in two groups. After 15 days one set was subjected to water stress (WS by withholding water supply for 3 days. Morphological and biochemical parameters of 18 days old seedlings were recorded. Seedling height decreased in all treatments. A gradual decrease in relative water content, pigment and protein contents of wheat seedlings were observed. Sugar and proline contents increased in treatments. An increase in malondialdehyde (MDA content and antioxidative enzyme activities was recorded. Elevation in catalase activity was observed in all treatments except in plants with water deficit. Ascorbate peroxidase (APX and guaiacol peroxidase (GPX activities increased when residue mixed with soil but decreased in seedlings under the combined influence of the residue and water stress. Higher amount of MDA and lower activities of APX and GPX reflected the oxidative damage in seedlings under combined treatments. Rice residue inhibited growth of wheat seedlings. Water stress intensified the effects of residue.

Residual stresses

International Nuclear Information System (INIS)

Sahotra, I.M.

2006-01-01

The principal effect of unloading a material strained into the plastic range is to create a permanent set (plastic deformation), which if restricted somehow, gives rise to a system of self-balancing within the same member or reaction balanced by other members of the structure., known as residual stresses. These stresses stay there as locked-in stresses, in the body or a part of it in the absence of any external loading. Residual stresses are induced during hot-rolling and welding differential cooling, cold-forming and extruding: cold straightening and spot heating, fabrication and forced fitting of components constraining the structure to a particular geometry. The areas which cool more quickly develop residual compressive stresses, while the slower cooling areas develop residual tensile stresses, and a self-balancing or reaction balanced system of residual stresses is formed. The phenomenon of residual stresses is the most challenging in its application in surface modification techniques determining endurance mechanism against fracture and fatigue failures. This paper discusses the mechanism of residual stresses, that how the residual stresses are fanned and what their behavior is under the action of external forces. Such as in the case of a circular bar under limit torque, rectangular beam under limt moment, reclaiming of shafts welds and peening etc. (author)

Thermal residual stress evaluation based on phase-shift lateral shearing interferometry

Science.gov (United States)

Dai, Xiangjun; Yun, Hai; Shao, Xinxing; Wang, Yanxia; Zhang, Donghuan; Yang, Fujun; He, Xiaoyuan

2018-06-01

An interesting phase-shift lateral shearing interferometry system was proposed to evaluate the thermal residual stress distribution in transparent specimen. The phase-shift interferograms was generated by moving a parallel plane plate. Based on analyzing the fringes deflected by deformation and refractive index change, the stress distribution can be obtained. To verify the validity of the proposed method, a typical experiment was elaborately designed to determine thermal residual stresses of a transparent PMMA plate subjected to the flame of a lighter. The sum of in-plane stress distribution was demonstrated. The experimental data were compared with values measured by digital gradient sensing method. Comparison of the results reveals the effectiveness and feasibility of the proposed method.

Integrated decision making for the optimal bioethanol supply chain

International Nuclear Information System (INIS)

Corsano, Gabriela; Fumero, Yanina; Montagna, Jorge M.

2014-01-01

Highlights: • Optimal allocation, design and production planning of integrated ethanol plants is considered. • Mixed Integer Programming model is presented for solving the integration problem. • Different tradeoffs can be assessed and analyzed. • The modeling framework represents an useful tool for guiding decision making. - Abstract: Bioethanol production poses different challenges that require an integrated approach. Usually previous works have focused on specific perspectives of the global problem. On the contrary, bioethanol, in particular, and biofuels, in general, requires an integrated decision making framework that takes into account the needs and concerns of the different members involved in its supply chain. In this work, a Mixed Integer Linear Programming (MILP) model for the optimal allocation, design and production planning of integrated ethanol/yeast plants is considered. The proposed formulation addresses the relations between different aspects of the bioethanol supply chain and provides an efficient tool to assess the global operation of the supply chain taking into account different points of view. The model proposed in this work simultaneously determines the structure of a three-echelon supply chain (raw material sites, production facilities and customer zones), the design of each installed plant and operational considerations through production campaigns. Yeast production is considered in order to reduce the negative environmental impact caused by bioethanol residues. Several cases are presented in order to assess the approach capabilities and to evaluate the tradeoffs among all the decisions

Market Confidence Predicts Stock Price: Beyond Supply and Demand.

Directory of Open Access Journals (Sweden)

Xiao-Qian Sun

Full Text Available Stock price prediction is an important and challenging problem in stock market analysis. Existing prediction methods either exploit autocorrelation of stock price and its correlation with the supply and demand of stock, or explore predictive indictors exogenous to stock market. In this paper, using transaction record of stocks with identifier of traders, we introduce an index to characterize market confidence, i.e., the ratio of the number of traders who is active in two successive trading days to the number of active traders in a certain trading day. Strong Granger causality is found between the index of market confidence and stock price. We further predict stock price by incorporating the index of market confidence into a neural network based on time series of stock price. Experimental results on 50 stocks in two Chinese Stock Exchanges demonstrate that the accuracy of stock price prediction is significantly improved by the inclusion of the market confidence index. This study sheds light on using cross-day trading behavior to characterize market confidence and to predict stock price.

Market Confidence Predicts Stock Price: Beyond Supply and Demand.

Science.gov (United States)

Sun, Xiao-Qian; Shen, Hua-Wei; Cheng, Xue-Qi; Zhang, Yuqing

2016-01-01

Stock price prediction is an important and challenging problem in stock market analysis. Existing prediction methods either exploit autocorrelation of stock price and its correlation with the supply and demand of stock, or explore predictive indictors exogenous to stock market. In this paper, using transaction record of stocks with identifier of traders, we introduce an index to characterize market confidence, i.e., the ratio of the number of traders who is active in two successive trading days to the number of active traders in a certain trading day. Strong Granger causality is found between the index of market confidence and stock price. We further predict stock price by incorporating the index of market confidence into a neural network based on time series of stock price. Experimental results on 50 stocks in two Chinese Stock Exchanges demonstrate that the accuracy of stock price prediction is significantly improved by the inclusion of the market confidence index. This study sheds light on using cross-day trading behavior to characterize market confidence and to predict stock price.

Monetary policy and the causality between inflation and money supply in Indonesia

Directory of Open Access Journals (Sweden)

Gatot Sasongko

2018-05-01

Full Text Available Conceptually and empirically, inflation volatility in Indonesia is a monetary and fiscal phenomenon. This study focuses on the macroeconomic policy and public policy especially causality between two variables namely inflation and money supply in Indonesia. This study uses Indonesian macroeconomic data of inflation and money supply from the Bank of Indonesia publication during 2007.1–2017.7. Inflation is measured by the consumer price index, reflects the annual percentage change in costs of acquiring a basket of goods and services to the average consumers that may change at specified intervals. Meanwhile, money supply is measured by the currency, demand deposits, time deposits, and saving deposits. Methodically, this study uses the Granger Causality model to determine the causality between inflation and money supply. The results show that there is a one-way causality between inflation and money supply in Indonesia. These findings imply that money supply causes inflation, but not vice versa. This condition implies that the role of Indonesian Government and Bank of Indonesia were very crucial in managing and controlling macroeconomic policy and public policy. Then, analysis of money supply and inflation also related to impacting factors such as money laundering, role of banks, taxation, tax evasion, and corruption.

Health Risk Assessment of Pesticide Residues via Dietary Intake of Market Vegetables from Dhaka, Bangladesh

Directory of Open Access Journals (Sweden)

Md. Shakhaoat Hossain

2013-02-01

Full Text Available The present study was designed to assess the health risk of pesticide residues via dietary intake of vegetables collected from four top agro-based markets of Dhaka, Bangladesh. High performance liquid chromatography with a photo diode array detector (HPLC-PDA was used to determine six organophosphorus (chlorpyrifos, fenitrothion, parathion, ethion, acephate, fenthion, two carbamate (carbaryl and carbofuran and one pyrethroid (cypermethrin pesticide residues in twelve samples of three common vegetables (tomato, lady’s finger and brinjal. Pesticide residues ranged from below detectable limit (<0.01 to 0.36 mg/kg. Acephate, chlorpyrifos, ethion, carbaryl and cypermethrin were detected in only one sample, while co-occurrence occurred twice for fenitrothion and parathion. Apart from chlorpyrifos in tomato and cypermethrin in brinjal, all pesticide residues exceeded the maximum residue limit (MRL. Hazard risk index (HRI for ethion (10.12 and carbaryl (1.09 was found in lady’s finger and tomato, respectively. Rest of the pesticide residues were classified as not a health risk. A continuous monitoring and strict regulation should be enforced regarding control of pesticide residues in vegetables and other food commodities.

Mapping the Landscape and Evolutions of Green Supply Chain Management

Directory of Open Access Journals (Sweden)

Wei Shan

2018-02-01

Full Text Available There is a growing need to integrate environmental considerations into supply chain management research and practice. Conceptual papers are being updated all the time to gain a systematic view of the framework in green supply chain management. The purpose of this paper is to visualize the research to-date on green supply chain management according to the intellectual framework and hot topics. Using bibliometric analysis, our paper will present a comprehensive summary of previous research on the knowledge domain. Exploring 1145 papers mainly published from 2000 to May 2017 in international peer-reviewed journals from social sciences citation index (SSCI, the basic distribution of publications are analyzed, and nine prominent research clusters in green supply chain management are visualized by a co-citation network. Key issues are highlighted and analyzed. As for future inquiries, there are numerous opportunities for more advanced theoretically-grounded research and exploration of more multi-functional and systematic approaches. In order to gain broader views of research, a triple bottom line approach can be widely applied to evaluation, impact mechanisms, decision making, drivers, risks and carrier analysis, as well as system contributions. This also provides an integrated point of view to understand the landscape of green supply chain management both for researchers and practitioners.

Assessment of agroforestry residue potentials for the bioeconomy in the European Union.

Science.gov (United States)

Thorenz, Andrea; Wietschel, Lars; Stindt, Dennis; Tuma, Axel

2018-03-01

The biobased chemical industry is characterised by strong growth. Innovative products and materials such as biopolymers have been developed, and current European demand for biopolymers exceeds the domestic supply. Agroforestry residues can serve as main sources of the basic building blocks for chemicals and materials. This work assesses sustainably available agroforestry residues to feed a high added-value materials and product bioeconomy. To evaluate bioeconomic potential, a structured three-step approach is applied. Cultivation practices, sustainability issues, legislative restrictions, technical limitations and competitive applications are considered. All data regarding bioeconomic potential are processed on a regional level and mapped by ArcGIS. Our results identify wheat straw as the most promising source in the agricultural sector, followed by maize stover, barley straw and rape straw, which all contain a total concentration of lignocellulose of more than 80% of dry matter. In the forestry sector, residue bark from two coniferous species, spruce and pine, is the most promising source, with approximately 70% lignocellulose. Additionally, coniferous bark contains considerable amounts of tannin, which has attracted increasing interest for industrial utilisation. A sensitivity analysis concerning removal rates, residue-to-crop ratios, changes in farming technologies and competing applications is applied at the end of the study to consolidate our results.

Colombian equity return and narrow money supply: an asymmetric cointegration analysis

Directory of Open Access Journals (Sweden)

Chu V. Nguyen

2012-12-01

Full Text Available The asymmetric, cointegrating relationship between the return on equity market and the narrowly defined money supply is documented. In fact, equity return and the monthly percentage change in the Colombian money supply M1 spread adjusts to the threshold value slower when a contractionary countercyclical policy action or an economic shock causes the money supply M1 to fall relative to the share price index, widening their spread, than when an expansionary countercyclical monetary policy action or a shock causes money supply M1 to move in the opposite direction, narrowing their spread. The empirical findings further indicate the impact lag on the Colombian monetary policy in the equity market is two years. These empirical findings should be of interest to both domestic and international investors who are interested in the Colombian equity market. The results also reveal the presence of both the neoclassical and the post-Keynesian positions on the relationship between equity return and money supply M1 in the Colombian financial market. In the age of globalization, these findings may provide a better understanding of the impact of the countercyclical monetary policy on the equity market in Latin American economies.

International symposium on restoration of environments with radioactive residues. Contributed papers

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

After the use of radioactive materials or the utilization of nuclear energy, some radioactive residues may remain in the environment and give rise to the exposure of persons living or working in that environment. Most commonly, these residues are the result of human activities that have been carried out in the past without proper regard to the internationally accepted radiation protection requirements for practices, or at that time when those requirements were less stringent than today. Of course unforeseen events such as accidents of concentrations of naturally occurring radioactive material can also lead to higher levels of radioactive residues in theenvironment. The purpose of this Symposium is to foster an information exchange on the restoration of environments with radioactive residues. This includes the principles and criteria for guiding decision making and the methodologies for assessing the radiological situation and developing remediation plans for the human habitats affected. The overall aim is to promote an international consensus on the relevant issues in these areas. This document contains 51 presentations delivered during oral and poster sessions. Each of the presentations was separately indexed and provided with an abstract.

International symposium on restoration of environments with radioactive residues. Contributed papers

International Nuclear Information System (INIS)

1999-01-01

After the use of radioactive materials or the utilization of nuclear energy, some radioactive residues may remain in the environment and give rise to the exposure of persons living or working in that environment. Most commonly, these residues are the result of human activities that have been carried out in the past without proper regard to the internationally accepted radiation protection requirements for practices, or at that time when those requirements were less stringent than today. Of course unforeseen events such as accidents of concentrations of naturally occurring radioactive material can also lead to higher levels of radioactive residues in the environment. The purpose of this Symposium is to foster an information exchange on the restoration of environments with radioactive residues. This includes the principles and criteria for guiding decision making and the methodologies for assessing the radiological situation and developing remediation plans for the human habitats affected. The overall aim is to promote an international consensus on the relevant issues in these areas. This document contains 51 presentations delivered during oral and poster sessions. Each of the presentations was separately indexed and provided with an abstract

Field performance of a pneumatic row crop planter equipped with active toothed coulter for direct planting of corn in wheat residue

Directory of Open Access Journals (Sweden)

J. Nejadi

2013-04-01

Full Text Available In this research effects of active toothed coulter on planter penetration in semi-dried soils covered with previous wheat (triticum aestivum residue was studied. Therefore, effects of three levels of speed ratio (coulter peripheral speed/tractor forward speed; 1.22, 2, 3 at two previous residue levels (baled and non-baled and two modes of planter attachment (with and without row cleaner on the corn (zea mays planting depth and its uniformity, amount of surface residue, emergence rate index and seed spacings indices were investigated. Results showed that planting depth and its uniformity increased significantly with increasing speed ratio, so that desired planting depth was obtained at speed ratio of 2. The emergence rate index decreased with increase in speed ratio mainly due to increase in seeding depth at higher speed ratios. Miss and precision indices decreased in a significant manner with increase in the speed ratio. Other results showed that planting with row cleaner attachment into baled-out residue plots at speed ratio of 2 resulted in 31% decrease in miss and 30% decrease in precision indices as compared to control (inactive coulter. Quality of feed index at same conditions was 72%, the increase was up to 11% as compared to control. No significant difference was found between speed ratios of 2 and 3 for all the parameters studied. The results suggests that the row crop planter equipped with active toothed coulter and row cleaner attachment can be satisfactorily used for direct corn planting in hard soils covered with previous crop residues.

Environmental sustainability assessment of fruit cultivation and processing using fruit and cocoa residues for bioenergy and compost. Case study from Ghana

DEFF Research Database (Denmark)

Kamp, Andreas; Østergård, Hanne

2016-01-01

and electricity production using farming and processing residues and by recycling of nutrients and carbon to soil. Cocoa shells are used as a co-substrate in the biogas production. Estimating the environmental impact of cocoa shell residues exposes the multifunctionality issue, continuously debated in ESA......, particularly concerning bioenergy production. We compare the use of allocation of cocoa production impacts and system expansion that includes cocoa production as possible methods to manage multifunctionality of inputs. Inassessments of residue-based production, we recommend using the latter method. Applying......Agro-industrial businesses often have easy access to agricultural and processing residues with whichthey may reduce costs and pollution by integrating their production with bioenergy production. In regionswith unreliable power supply, on-site electricity generation is a means to secure stable...

Residual stresses

International Nuclear Information System (INIS)

Macherauch, E.

1978-01-01

Residual stresses are stresses which exist in a material without the influence of external powers and moments. They come into existence when the volume of a material constantly changes its form as a consequence of mechanical, thermal, and/or chemical processes and is hindered by neighbouring volumes. Bodies with residual stress are in mechanical balance. These residual stresses can be manifested by means of all mechanical interventions disturbing this balance. Acoustical, optical, radiological, and magnetical methods involving material changes caused by residual stress can also serve for determining residual stress. Residual stresses have an ambivalent character. In technical practice, they are feared and liked at the same time. They cause trouble because they can be the cause for unexpected behaviour of construction elements. They are feared since they can cause failure, in the worst case with catastrophical consequences. They are appreciated, on the other hand, because, in many cases, they can contribute to improvements of the material behaviour under certain circumstances. But they are especially liked for their giving convenient and (this is most important) mostly uncontrollable explanations. For only in very few cases we have enough knowledge and possibilities for the objective evaluation of residual stresses. (orig.) [de

Investigation of the possibility of using residual heat reactor energy

Science.gov (United States)

Aminov, R. Z.; Yurin, V. E.; Bessonov, V. N.

2017-11-01

The largest contribution to the probable frequency of core damage is blackout events. The main component of the heat capacity at each reactor within a few minutes following a blackout is the heat resulting from the braking of beta-particles and the transfer of gamma-ray energy by the fission fragments and their decay products, which is known as the residual heat. The power of the residual heat changes gradually over a long period of time and for a VVER-1000 reactor is about 15-20 MW of thermal power over 72 hours. Current cooldown systems increase the cost of the basic nuclear power plants (NPP) funds without changing the amount of electricity generated. Such systems remain on standby, accelerating the aging of the equipment and accordingly reducing its reliability. The probability of system failure increases with the duration of idle time. Furthermore, the reactor residual heat energy is not used. A proposed system for cooling nuclear power plants involves the use of residual thermal power to supply the station’s own needs in emergency situations accompanied by a complete blackout. The thermal power of residual heat can be converted to electrical energy through an additional low power steam turbine. In normal mode, the additional steam turbine generates electricity, which makes it possible to ensure spare NPP and a return on the investment in the reservation system. In this work, experimental data obtained from a Balakovo NPP was analyzed to determine the admissibility of cooldown of the reactors through the 2nd circuit over a long time period, while maintaining high-level parameters for the steam generated by the steam generators.

Biological nitrate removal processes from drinking water supply-a review.

Science.gov (United States)

Mohseni-Bandpi, Anoushiravan; Elliott, David Jack; Zazouli, Mohammad Ali

2013-12-19

This paper reviews both heterotrophic and autotrophic processes for the removal of nitrate from water supplies. The most commonly used carbon sources in heterotrophic denitrification are methanol, ethanol and acetic acid. Process performance for each feed stock is compared with particular reference nitrate and nitrite residual and to toxicity potential. Autotrophic nitrate removal has the advantages of not requiring an organic carbon source; however the slow growth rate of autotrophic bacteria and low nitrate removal rate have contributed to the fact that relatively few full scale plants are in operation at the present time.

Is residual memory variance a valid method for quantifying cognitive reserve? A longitudinal application

Science.gov (United States)

Zahodne, Laura B.; Manly, Jennifer J.; Brickman, Adam M.; Narkhede, Atul; Griffith, Erica Y.; Guzman, Vanessa A.; Schupf, Nicole; Stern, Yaakov

2016-01-01

Cognitive reserve describes the mismatch between brain integrity and cognitive performance. Older adults with high cognitive reserve are more resilient to age-related brain pathology. Traditionally, cognitive reserve is indexed indirectly via static proxy variables (e.g., years of education). More recently, cross-sectional studies have suggested that reserve can be expressed as residual variance in episodic memory performance that remains after accounting for demographic factors and brain pathology (whole brain, hippocampal, and white matter hyperintensity volumes). The present study extends these methods to a longitudinal framework in a community-based cohort of 244 older adults who underwent two comprehensive neuropsychological and structural magnetic resonance imaging sessions over 4.6 years. On average, residual memory variance decreased over time, consistent with the idea that cognitive reserve is depleted over time. Individual differences in change in residual memory variance predicted incident dementia, independent of baseline residual memory variance. Multiple-group latent difference score models revealed tighter coupling between brain and language changes among individuals with decreasing residual memory variance. These results suggest that changes in residual memory variance may capture a dynamic aspect of cognitive reserve and could be a useful way to summarize individual cognitive responses to brain changes. Change in residual memory variance among initially non-demented older adults was a better predictor of incident dementia than residual memory variance measured at one time-point. PMID:26348002

The application of the triple bottom line approach to sustainability assessment: The case study of the UK automotive supply chain

Energy Technology Data Exchange (ETDEWEB)

Azevedo, S.; Barros, M.

2017-07-01

Purpose: The objective of this paper is to assess the level of sustainability of the UK automotive supply chain considering simultaneously the three dimensions of sustainability (economic, social and environmental) representing the Triple Bottom Line (TBL) approach. Design/methodology/approach: The assessment of the automotive SC’ sustainability is based on the framework proposed by Salvado, Azevedo, Matias and Ferreira (2011) and uses the Simple Additive Weighting (SAW) method to aggregate economic, environmental and social indicators into a unique index. A case study on the UK automotive industry is used and the data do perform this study is collected from the sustainability reports of the UK’ automotive companies. Findings and Originality/value: The proposed framework represents an important benchmarking tool, offering managers the possibility for assessing the sustainability behaviour of its supply chain and compare it with other supply chains. Once identified the dimension of sustainability where the company or the supply chain is worst performer managers can work closer to their supply chain’ partners in order to improve the performance of those dimension of sustainability. Research limitations/implications: One limitation of the suggested approach is related to the ambiguity of the sustainability’ indicators selection and the definition of weights for each sustainability dimension. Practical implications: The assessment of the SC sustainability by using the suggested framework to compute a SC sustainability index offers managers an opportunity for assessing the level of sustainability of each individual company and the corresponding SC in a very easy way. It also represents an opportunity for improving company performance. In this way managers can use the information on the sustainability index to help adjust their company's behaviour and improve their economic, social and environmental performance. Originality/value: The proposed framework

The application of the triple bottom line approach to sustainability assessment: The case study of the UK automotive supply chain

International Nuclear Information System (INIS)

Azevedo, S.; Barros, M.

2017-01-01

Purpose: The objective of this paper is to assess the level of sustainability of the UK automotive supply chain considering simultaneously the three dimensions of sustainability (economic, social and environmental) representing the Triple Bottom Line (TBL) approach. Design/methodology/approach: The assessment of the automotive SC’ sustainability is based on the framework proposed by Salvado, Azevedo, Matias and Ferreira (2011) and uses the Simple Additive Weighting (SAW) method to aggregate economic, environmental and social indicators into a unique index. A case study on the UK automotive industry is used and the data do perform this study is collected from the sustainability reports of the UK’ automotive companies. Findings and Originality/value: The proposed framework represents an important benchmarking tool, offering managers the possibility for assessing the sustainability behaviour of its supply chain and compare it with other supply chains. Once identified the dimension of sustainability where the company or the supply chain is worst performer managers can work closer to their supply chain’ partners in order to improve the performance of those dimension of sustainability. Research limitations/implications: One limitation of the suggested approach is related to the ambiguity of the sustainability’ indicators selection and the definition of weights for each sustainability dimension. Practical implications: The assessment of the SC sustainability by using the suggested framework to compute a SC sustainability index offers managers an opportunity for assessing the level of sustainability of each individual company and the corresponding SC in a very easy way. It also represents an opportunity for improving company performance. In this way managers can use the information on the sustainability index to help adjust their company's behaviour and improve their economic, social and environmental performance. Originality/value: The proposed framework

The application of the triple bottom line approach to sustainability assessment: The case study of the UK automotive supply chain

Directory of Open Access Journals (Sweden)

Susana Azevedo

2017-05-01

Full Text Available Purpose: The objective of this paper is to assess the level of sustainability of the UK automotive supply chain considering simultaneously the three dimensions of sustainability (economic, social and environmental representing the Triple Bottom Line (TBL approach. Design/methodology/approach: The assessment of the automotive SC’ sustainability is based on the framework proposed by Salvado, Azevedo, Matias and Ferreira (2011 and uses the Simple Additive Weighting (SAW method to aggregate economic, environmental and social indicators into a unique index. A case study on the UK automotive industry is used and the data do perform this study is collected from the sustainability reports of the UK’ automotive companies. Findings and Originality/value: The proposed framework represents an important benchmarking tool, offering managers the possibility for assessing the sustainability behaviour of its supply chain and compare it with other supply chains. Once identified the dimension of sustainability where the company or the supply chain is worst performer managers can work closer to their supply chain’ partners in order to improve the performance of those dimension of sustainability. Research limitations/implications: One limitation of the suggested approach is related to the ambiguity of the sustainability’ indicators selection and the definition of weights for each sustainability dimension. Practical implications: The assessment of the SC sustainability by using the suggested framework to compute a SC sustainability index offers managers an opportunity for assessing the level of sustainability of each individual company and the corresponding SC in a very easy way. It also represents an opportunity for improving company performance. In this way managers can use the information on the sustainability index to help adjust their company's behaviour and improve their economic, social and environmental performance. Originality/value: The proposed

Efeito residual da silicatagem no solo e na produtividade do capim-marandu sob pastejo Residual effect of silicate application on soil and brachiaria grass yield under grazing

Directory of Open Access Journals (Sweden)

Letícia de Abreu Faria

2008-06-01

calcium silicate and is an alternative for soil acidity correction. This study evaluated the residual effects of calcium silicate application on the chemical properties of a Rhodic Hapludox in a rotation system with Brachiaria grass under different grazing intensities. The experiment was a complete randomized block design, where the plots consisted of grazing intensities, determined by the forage supply of 50, 100, 150 and 200 kg t-1 of MS/ PV, respectively, and the subplots of surface applications of calcium silicate in combination with dolomitic limestone ( 0 + 0; 2 + 0; 4 + 0; 6 + 0; 2 + 4; 4 + 2 and 0 + 6 t ha-1, with four replications. Evaluations were carried out in two seasons (summer and winter and at three soil depths (0-10, 10-20 and 20-40 cm. The results of residual calcium silicate and limestone effects 720 days after application were positive for soil pH in CaCl2, exchangeable Ca, Mg and K, concentration, H + Al values, and base saturation. A forage supply of 200 kg t-1 and the limestone treatment (0 + 6 t ha-1 increased pH in CaCl2 and base saturation values, mainly in the 0-10 cm layer. The soil silicon levels were influenced by the applied calcium silicate doses, but they resulted in no significant leaf Si concentration. The chemical-bromatological composition of the forage was affected only by forage supply and seasons. The forage supply, seasons and seasons x supply interaction influenced the pre-grazing dry matter production. The yield was highest at 200 kg t-1 and lowest at 50 kg t-1 forage supply in both seasons. Supply and seasons influenced the after-grazing forage residue. The highest rates of dry matter accumulation were obtained with forage supplies of 50 and 100 kg t-1 and application of 2 t ha-1 calcium silicate.

Evaluation of residue-residue contact predictions in CASP9

KAUST Repository

Monastyrskyy, Bohdan

2011-01-01

This work presents the results of the assessment of the intramolecular residue-residue contact predictions submitted to CASP9. The methodology for the assessment does not differ from that used in previous CASPs, with two basic evaluation measures being the precision in recognizing contacts and the difference between the distribution of distances in the subset of predicted contact pairs versus all pairs of residues in the structure. The emphasis is placed on the prediction of long-range contacts (i.e., contacts between residues separated by at least 24 residues along sequence) in target proteins that cannot be easily modeled by homology. Although there is considerable activity in the field, the current analysis reports no discernable progress since CASP8.

Evaluation of the use of purine derivatives:creatinine ratio in spot urine samples as an index of microbial protein supply in Yerli Kara crossbred cattle

International Nuclear Information System (INIS)

Cetinkaya, N.; Ozdemir, H.; Gucus, A.I.; Ozcan, H.; Sogut, A.; Yaman, S.

2004-01-01

.7 (PDC index), the DOMI (kg/d) of Groups I, II and III were estimated as 2.8 ± 0.6, 2.6 ± 0.7 and 2.7 ± 0.7 respectively. It is concluded that the PDC Index in spot urine samples could be used under farm conditions as an indicator of microbial protein supply in YK-C cattle, and also DOMI can be estimated from the PDC index using spot urine samples under field conditions. (author)

Residual-limb quality and functional mobility 1 year after transtibial amputation caused by vascular insufficiency

NARCIS (Netherlands)

H.J. Arwert (Henk); M.H. van Doorn-Loogman (Mirjam); J. Koning (Jan); M. Terburg (Martinus); M. Rol (Mathilde); M.E. Roebroeck (Marij)

2007-01-01

textabstractThis study identified which residual-limb quality factors are related to functional mobility 1 year after transtibial (TT) amputation. A group of 28 TT amputees were evaluated with respect to their functional mobility (Prosthesis Evaluation Questionnaire [PEQ], Locomotor Index, Timed Up

Changes of Field Incurred Chlorpyrifos and Its Toxic Metabolite Residues in Rice during Food Processing from-RAC-to-Consumption

Science.gov (United States)

Zhang, Zhiyong; Jiang, Wayne W.; Jian, Qiu; Song, Wencheng; Zheng, Zuntao; Wang, Donglan; Liu, Xianjin

2015-01-01

The objectives of this study were to determine the effects of food processing on field incurred residues levels of chlorpyrifos and its metabolite 3,5,6-Trichloro-2-pyridinol (TCP) in rice. The chlorpyrifos and TCP were found to be 1.27 and 0.093 mg kg-1 in straw and 0.41 and 0.073 mg kg-1 in grain, respectively. It is observed that the sunlight for 2 hours does not decrease the chlorpyrifos and TCP residues in grain significantly. Their residues in rice were reduced by up to 50% by hulling. The cooking reduced the chlorpyrifos and TCP in rice to undetectable level (below 0.01 mg kg-1). Processing factors (PFs) of chlorpyrifos and TCP residues in rice during food processing were similar. Various factors have impacts on the fates of chlorpyrifos and TCP residues and the important steps to reduce their residues in rice were hulling and cooking. The results can contribute to assure the consumer of a safe wholesome food supply. PMID:25608031

Accessibility levels to potable Water Supply in Rural Areas of Akwa ...

African Journals Online (AJOL)

`123456789jkl''''#

1987-09-23

Sep 23, 1987 ... number of water boreholes in the communities were collected and analyzed. The population of the communities provided a basis for evolving an index that measured the levels of access to potable water supply in the study area. The use of GIS was subsequently employed to map out the study area on the ...

Macroeconomic Determinants of the Stock Market Index and Policy Implications: The Case of a Central European Country

Directory of Open Access Journals (Sweden)

Yu HSING

2011-05-01

Full Text Available This paper examines the relationship between Hungary’s stock market index and relevant macroeconomic variables. The GARCH model is applied in empirical work. It finds that Hungary’s stock market index has a positive relationship with real GDP, the ratio of the government debt to GDP, the nominal effective exchange rate and the German stock market index, a negative relationship with the real interest rate, the expected inflation rate and the government bond yield in the euro area, and a quadratic relationship with real M2 money supply. It indicates that there is a positive (negative relationship if real M2 money supply is less (greater than the critical value of 9,563 billion forints. If the quadratic relationship is not specified and tested, the positive coefficient of real M2 will be insignificant at the 10% level, and we may reach a misleading conclusion that the stock market index is not affected by real M2.

Investigating supply chain sustainability in South African organisations

Directory of Open Access Journals (Sweden)

Gabrielle Niehaus

2018-02-01

Full Text Available Background: The need for sustainable supply chain management has become a necessity given the growing impact of climate change and global warming. The South African (SA government is planning to implement a carbon tax in the future, which will present financial challenges for organisations already facing social and environmental difficulties. Objectives: The main objective of this article was to investigate the current sustainability reporting practices in supply chains of SA organisations. The focus was specifically on the supply chain sustainability practices of organisations listed in selected sectors on the Johannesburg Stock Exchange (JSE. A secondary objective was to investigate preparation efforts by SA companies for the impending carbon tax. Method: Data collected from sustainability and integrated annual reports of organisations in the sample were analysed using non-parametric statistical tests to compare sectors on the JSE and to compare companies listed on the socially responsible investment (SRI Index with those that are not. Results: The results showed that there is insufficient data for some of the sectors; however, there are differences in the supply chain and sustainability practices for the remaining sectors. There are also differences in these practices between SRI and non-SRI companies. The research also showed that companies are discussing important concepts relating to the implementation of the impending carbon tax. Research impact: SA organisations need to increase their focus on sustainable supply chain practices. Further investigation into the preparation efforts of companies to reduce their emissions and/or footprint and mitigate the impact of the impending carbon tax is necessary.

Using commodity-indexed financing to fund OPEC/Alaska's development projects

International Nuclear Information System (INIS)

Essayyad, Musa

1992-01-01

An impediment to the process of economic diversification in OPEC and Alaska is the lack of favourable access to local and international capital markets to finance development projects, particularly mineral resource development. This paper highlights the importance of commodity-indexed bonds, including oil- and gold- indexed bonds, as a financing alternative to supplement the supply shortage of loanable funds from conventional, local and international commercial banks. The indexation concept is discussed, features of different bonds issued to date are contrasted and the benefits and risks for borrowers and investors are highlighted. An analysis is made of the experience of OPEC and Alaska in using commodity-indexed bonds and the feasibility of Alaska and some OPEC countries entering into commodity-linked-financed joint ventures is examined. Future prospects for commodity-linked bonds are explored. Not withstanding the fact that the immediate market timing is unfavourable, the long-term benefits of commodity-indexed securities are recognized. (U.K.)

The stability of clay using Portland cement and calsium carbide residue with California bearing ratio (cbr) value

Science.gov (United States)

Puji Hastuty, Ika; Roesyanto; Novia Sari, Intan; Simanjuntak, Oberlyn

2018-03-01

Clay is a type of soil which is often used for stabilization. This is caused by its properties which are very hard in dry conditions and plastic in the medium content of water. However, at a higher level of water, clay will be cohesive and very lenient causing a large volume change due to the influence of water and also causing the soil to expand and shrink for a short period of time. These are the reasons why stabilization is needed in order to increase bearing capacity value of the clay. Stabilization is one of the ways to the conditon of soil that has the poor index properties, for example by adding chemical material to the soil. One of the chemical materials than can be added to the soil is calsium carbide residue. The purpose of this research is to know the fixation of index properties as the effect of adding 2% PC and calsium carbide residue to the clay, and to know the bearing capacity value of CBR (California Bearing Ratio) as the effect of adding the stabilization agent and to know the optimum content of adding calsium carbide residue. The result of the research shows that the usage of 2% cement in the soil that has CBR value 5,76%, and adding 2% cement and 9% calsium carbide residue with a period of curing 14 days has the lagerst of CBR value that is 9,95%. The unsoaked CBR value shows the increase of CBR value upto the mixture content of calsium carbide residue 9% and, decreases at the mixture content of calsium carbide residue 10% and 11%.

Designing a power supply for Nim-bin formatted equipment

International Nuclear Information System (INIS)

Banuelos G, L. E.; Hernandez D, V. M.; Vega C, H. R.

2016-09-01

From an old Nuclear Chicago power supply that was practically in the trash, was able to recover the 19 inches casing, rear connectors and the housing where the circuits were. From here all mechanical parts were cleaned and the electronic design was started to replace the original voltage and current functions of this equipment. The cards for the ±6, ±12 and ±24 voltages were designed, simulated and tested with circuitry that does not rely on specialized components or that is sold only by the equipment manufacturer. In the handling of the current by each voltage to operate, was possible to tie with the specifications of the manufacturers like Ortec or Canberra where a model of power supply gives a power of 160 Watts. Basic tests were performed to show that the behavior is very similar to commercial equipment; such as the full load regulation index and the noise level in the supply voltages. So our Nim-bin voltage source is viable for use in our institution laboratories. (Author)

Decision-Making for Supply Chain Integration Supply Chain Integration

CERN Document Server

Lettice, Fiona; Durowoju, Olatunde

2012-01-01

Effective supply chain integration, and the tight co-ordination it creates, is an essential pre-requisite for successful supply chain management.  Decision-Making for Supply Chain Integration is a practical reference on recent research in the area of supply chain integration focusing on distributed decision-making problems. Recent applications of various decision-making tools for integrating supply chains are covered including chapters focusing on: •Supplier selection, pricing strategy and inventory decisions in multi-level supply chains, •RFID-enabled distributed decision-making, •Operational risk issues and time-critical decision-making for sensitive logistics nodes, Modelling end to end processes to improve supply chain integration, and •Integrated systems to improve service delivery and optimize resource use. Decision-Making for Supply Chain Integration provides an insight into the tools and methodologies of this field with support from real-life case studies demonstrating successful application ...

An ant colony based resilience approach to cascading failures in cluster supply network

Science.gov (United States)

Wang, Yingcong; Xiao, Renbin

2016-11-01

Cluster supply chain network is a typical complex network and easily suffers cascading failures under disruption events, which is caused by the under-load of enterprises. Improving network resilience can increase the ability of recovery from cascading failures. Social resilience is found in ant colony and comes from ant's spatial fidelity zones (SFZ). Starting from the under-load failures, this paper proposes a resilience method to cascading failures in cluster supply chain network by leveraging on social resilience of ant colony. First, the mapping between ant colony SFZ and cluster supply chain network SFZ is presented. Second, a new cascading model for cluster supply chain network is constructed based on under-load failures. Then, the SFZ-based resilience method and index to cascading failures are developed according to ant colony's social resilience. Finally, a numerical simulation and a case study are used to verify the validity of the cascading model and the resilience method. Experimental results show that, the cluster supply chain network becomes resilient to cascading failures under the SFZ-based resilience method, and the cluster supply chain network resilience can be enhanced by improving the ability of enterprises to recover and adjust.

Increasing biomass resource availability through supply chain analysis

International Nuclear Information System (INIS)

Welfle, Andrew; Gilbert, Paul; Thornley, Patricia

2014-01-01

Increased inclusion of biomass in energy strategies all over the world means that greater mobilisation of biomass resources will be required to meet demand. Strategies of many EU countries assume the future use of non-EU sourced biomass. An increasing number of studies call for the UK to consider alternative options, principally to better utilise indigenous resources. This research identifies the indigenous biomass resources that demonstrate the greatest promise for the UK bioenergy sector and evaluates the extent that different supply chain drivers influence resource availability. The analysis finds that the UK's resources with greatest primary bioenergy potential are household wastes (>115 TWh by 2050), energy crops (>100 TWh by 2050) and agricultural residues (>80 TWh by 2050). The availability of biomass waste resources was found to demonstrate great promise for the bioenergy sector, although are highly susceptible to influences, most notably by the focus of adopted waste management strategies. Biomass residue resources were found to be the resource category least susceptible to influence, with relatively high near-term availability that is forecast to increase – therefore representing a potentially robust resource for the bioenergy sector. The near-term availability of UK energy crops was found to be much less significant compared to other resource categories. Energy crops represent long-term potential for the bioenergy sector, although achieving higher limits of availability will be dependent on the successful management of key influencing drivers. The research highlights that the availability of indigenous resources is largely influenced by a few key drivers, this contradicting areas of consensus of current UK bioenergy policy. - Highlights: • As global biomass demand increases, focus is placed indigenous resources. • A Biomass Resource Model is applied to analyse UK biomass supply chain dynamics. • Biomass availability is best increased

Issues in the determination of the optimal portfolio of electricity supply options

International Nuclear Information System (INIS)

Hickey, Emily A.; Lon Carlson, J.; Loomis, David

2010-01-01

In recent years a growing amount of attention has been focused on the need to develop a cost-effective portfolio of electricity supply options that provides society with a measure of protection from such factors as fuel price volatility and supply interruptions. A number of strategies, including portfolio theory, real options theory, and different measures of diversity have been suggested. In this paper we begin by first considering how we might characterize an optimal portfolio of supply options and identify a number of constraints that must be satisfied as part of the optimization process. We then review the strengths and limitations of each approach listed above. The results of our review lead us to conclude that, of the strategies we consider, using the concept of diversity to assess the viability of an electricity supply portfolio is most appropriate. We then provide an example of how a particular measure of diversity, the Shannon-Weiner Index, can be used to assess the diversity of the electricity supply portfolio in the state of Illinois, the region served by the Midwest Independent System Operator (MISO), and the continental United States.

Port supply chain integration : analyzing biofuel supply chains

NARCIS (Netherlands)

Stevens, Leonie C. E.; Vis, Iris F. A.

2016-01-01

This paper focuses on port supply chain integration to strengthen operational and business performance. We provide a structured and comprehensive method to enable port supply chain integration and demonstrate its applicability to the biofuel supply chain. We define the value proposition, role,

Performance of the main ring magnet power supply of the KEK 12 GeV proton synchrotron

International Nuclear Information System (INIS)

Sato, H.; Sueno, T.; Toyama, T.; Mikawa, Ml; Toda, M.; Matsumoto, S.; Nakano, M.

1992-01-01

The main ring magnet power supply of the KEK 12 GeV PS consists of several twelve-pulse thyristor rectifiers with dc filters, of two reactive power compensators with tuned ac harmonic filters and of an analog and digital hybrid control system. In order to obtain well defined parameters-such as absolute precision of beam energy, stable beam position, tracking between focusing and bending fields to fix the betatron tune, stable acquisition of extracted beam spill etc.-one wants to operate this large pulsed power supply with high current reproducibility and low residual current ripple. In this paper, several stabilization techniques are applied in order to meet these requirements

Is residual memory variance a valid method for quantifying cognitive reserve? A longitudinal application.

Science.gov (United States)

Zahodne, Laura B; Manly, Jennifer J; Brickman, Adam M; Narkhede, Atul; Griffith, Erica Y; Guzman, Vanessa A; Schupf, Nicole; Stern, Yaakov

2015-10-01

Cognitive reserve describes the mismatch between brain integrity and cognitive performance. Older adults with high cognitive reserve are more resilient to age-related brain pathology. Traditionally, cognitive reserve is indexed indirectly via static proxy variables (e.g., years of education). More recently, cross-sectional studies have suggested that reserve can be expressed as residual variance in episodic memory performance that remains after accounting for demographic factors and brain pathology (whole brain, hippocampal, and white matter hyperintensity volumes). The present study extends these methods to a longitudinal framework in a community-based cohort of 244 older adults who underwent two comprehensive neuropsychological and structural magnetic resonance imaging sessions over 4.6 years. On average, residual memory variance decreased over time, consistent with the idea that cognitive reserve is depleted over time. Individual differences in change in residual memory variance predicted incident dementia, independent of baseline residual memory variance. Multiple-group latent difference score models revealed tighter coupling between brain and language changes among individuals with decreasing residual memory variance. These results suggest that changes in residual memory variance may capture a dynamic aspect of cognitive reserve and could be a useful way to summarize individual cognitive responses to brain changes. Change in residual memory variance among initially non-demented older adults was a better predictor of incident dementia than residual memory variance measured at one time-point. Copyright © 2015. Published by Elsevier Ltd.

Using of abrasive water jet for measurement of residual stress in railway wheels

Czech Academy of Sciences Publication Activity Database

Hlaváček, Petr; Brumek, J.; Horsák, L.

2012-01-01

Roč. 2, č. 19 (2012), s. 387-390 ISSN 1330-3651 R&D Projects: GA MŠk ED2.1.00/03.0082 Institutional support: RVO:68145535 Keywords : abrasive water jet * railway wheel * residual stress Subject RIV: JQ - Machines ; Tools Impact factor: 0.601, year: 2012 http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=124848

Forest residue baling due diligence assessment, proving and transport trials

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

Transport is known to be the most significant cost element to wood fuel supply cost, with the cost of comminution being the most variable depending on the method chosen. It has been shown in previous studies that wood fuel compaction in the form of compression can significantly increase the net load capability of the transport systems currently available, thereby leading to significant savings in delivered price. The study identified the Fiberpac residue compression machine suitable for use under UK conditions. The Fiberpac machine was trialled for a period of approximately 6 months to gain information on productivity, reliability and production costs. (author)

Calibration of System Input Volume and Non-Revenue Water Index in Edo North, Nigeria

OpenAIRE

Philipa O. Idogho; Olotu Yahaya

2013-01-01

Water scarcity is a serious problem in developing world. It could be physical scarcity or economic water shortage. The output of physicsbased study conducted in Edo North, Nigeria revealed that physical water losses in the water distribution network have compounded the accessibility and affordability of safe drinking water. Water supply and loss variables such as Water Supply (WS) Physical Water Loss (WLρ) Apparent Water Loss (WLE) Water Loss Reduction Index (WLRI) and Av...

Crop residue harvest for bioenergy production and its implications on soil functioning and plant growth: A review

Directory of Open Access Journals (Sweden)

Maurício Roberto Cherubin

Full Text Available ABSTRACT: The use of crop residues as a bioenergy feedstock is considered a potential strategy to mitigate greenhouse gas (GHG emissions. However, indiscriminate harvesting of crop residues can induce deleterious effects on soil functioning, plant growth and other ecosystem services. Here, we have summarized the information available in the literature to identify and discuss the main trade-offs and synergisms involved in crop residue management for bioenergy production. The data consistently showed that crop residue harvest and the consequent lower input of organic matter into the soil led to C storage depletions over time, reducing cycling, supply and availability of soil nutrients, directly affecting the soil biota. Although the biota regulates key functions in the soil, crop residue can also cause proliferation of some important agricultural pests. In addition, crop residues act as physical barriers that protect the soil against raindrop impact and temperature variations. Therefore, intensive crop residue harvest can cause soil structure degradation, leading to soil compaction and increased risks of erosion. With regard to GHG emissions, there is no consensus about the potential impact of management of crop residue harvest. In general, residue harvest decreases CO2 and N2O emissions from the decomposition process, but it has no significant effect on CH4 emissions. Plant growth responses to soil and microclimate changes due to crop residue harvest are site and crop specific. Adoption of the best management practices can mitigate the adverse impacts of crop residue harvest. Longterm experiments within strategic production regions are essential to understand and monitor the impact of integrated agricultural systems and propose customized solutions for sustainable crop residue management in each region or landscape. Furthermore, private and public investments/cooperations are necessary for a better understanding of the potential environmental

Plant residues--a low cost, effective bioremediation treatment for petrogenic hydrocarbon-contaminated soil.

Science.gov (United States)

Shahsavari, Esmaeil; Adetutu, Eric M; Anderson, Peter A; Ball, Andrew S

2013-01-15

Petrogenic hydrocarbons represent the most commonly reported environmental contaminant in industrialised countries. In terms of remediating petrogenic contaminated hydrocarbons, finding sustainable non-invasive technologies represents an important goal. In this study, the effect of 4 types of plant residues on the bioremediation of aliphatic hydrocarbons was investigated in a 90 day greenhouse experiment. The results showed that contaminated soil amended with different plant residues led to statistically significant increases in the utilisation rate of Total Petroleum Hydrocarbon (TPH) relative to control values. The maximum TPH reduction (up to 83% or 6800 mg kg(-1)) occurred in soil mixed with pea straw, compared to a TPH reduction of 57% (4633 mg kg(-1)) in control soil. A positive correlation (0.75) between TPH reduction rate and the population of hydrocarbon-utilising microorganisms was observed; a weaker correlation (0.68) was seen between TPH degradation and bacterial population, confirming that adding plant materials significantly enhanced both hydrocarbonoclastic and general microbial soil activities. Microbial community analysis using Denaturing Gradient Gel Electrophoresis (DGGE) showed that amending the contaminated soil with plant residues (e.g., pea straw) caused changes in the soil microbial structure, as observed using the Shannon diversity index; the diversity index increased in amended treatments, suggesting that microorganisms present on the dead biomass may become important members of the microbial community. In terms of specific hydrocarbonoclastic activity, the number of alkB gene copies in the soil microbial community increased about 300-fold when plant residues were added to contaminated soil. This study has shown that plant residues stimulate TPH degradation in contaminated soil through stimulation and perhaps addition to the pool of hydrocarbon-utilising microorganisms, resulting in a changed microbial structure and increased alkB gene

Evaluation of a treatment system type septic tank - filter anaerobic of upward flow for the residual waters of the ecological benefit of the coffee

International Nuclear Information System (INIS)

Sanchez C, Jose Alejandro

1997-01-01

Colombia is the first country in the production of soft coffee in the world. The benefit for humid way it makes that this quality of coffee is obtained; however, the high consumption of water in the process and the later discharge to the superficial or underground sources, they have generated an environmental problem of great magnitude. Also, the sources of water that they have been contaminated with the discharges of the liquid waste that come from benefit of coffee they present, among other, serious inconveniences to be used as supplying sources of drinkable water. In time of crop, the coffee areas and their superficial sources of water usually register high indexes of contamination like consequence of the discharges of residual waters that come from the benefit of the coffee. In the Departments of Quindio, Valle, Caldas, Antioquia, etc., they have been come executing investigations of the residuals treatment that are derived of the pulp removal of the coffee (via humid), for anaerobic methods with satisfactory results. This project had the collaboration of the Departmental Committee of Coffee of Antioquia and the Environmental Engineering of the Antioquia University and it is formulated toward the evaluation of a Anaerobic filter of Ascendant flow, FAFA, preceded of a septic tank (biological sedimentation), as a treatment system of the coffee residual waters, with a waste native of a ecological benefit area. The obtained results were satisfactory although the generated waste is very intermittent and in times that are not of coffee crop it doesn't take place; what hinders more the application of biological systems for its treatment

Linking Energy- and Land-Use Systems: Energy Potentials and Environmental Risks of Using Agricultural Residues in Tanzania

Directory of Open Access Journals (Sweden)

Julia C. Terrapon-Pfaff

2012-02-01

Full Text Available This paper attempts to assess whether renewable energy self-sufficiency can be achieved in the crop production and processing sector in Tanzania and if this could be accomplished in an environmentally sustainable manner. In order to answer these questions the theoretical energy potential of process residues from commercially produced agricultural crops in Tanzania is evaluated. Furthermore, a set of sustainability indicators with focus on environmental criteria is applied to identify risks and opportunities of using these residues for energy generation. In particular, the positive and negative effects on the land-use-system (soil fertility, water use and quality, biodiversity, etc. are evaluated. The results show that energy generation with certain agricultural process residues could not only improve and secure the energy supply but could also improve the sustainability of current land-use practices.

Biomass production on the Olympic and Kitsap Peninsulas, Washington: updated logging residue ratios, slash pile volume-to-weight ratios, and supply curves for selected locations

Science.gov (United States)

Jason C. Cross; Eric C. Turnblom; Gregory J. Ettl

2013-01-01

Biomass residue produced by timber harvest operations is estimated for the Olympic and Kitsap Peninsulas, Washington. Scattered residues were sampled in 53 harvest units and piled residues were completely enumerated in 55 harvest units. Production is based on 2008 and 2009 data and is stratified by forest location, ownership type, harvest intensity, and harvest method...

Prognostic factors in operable breast cancer treated with neoadjuvant chemotherapy: towards a quantification of residual disease.

Science.gov (United States)

Mombelli, Sarah; Kwiatkowski, Fabrice; Abrial, Catherine; Wang-Lopez, Qian; de Boissieu, Paul; Garbar, Christian; Bensussan, Armand; Curé, Hervé

2015-01-01

Neoadjuvant chemotherapy (NACT) allows for a more frequent use of breast-conservative surgery; it is also an in vivo model of individual tumor sensitivity which permits to determine new prognostic factors to personalize the therapeutic approach. Between 2000 and 2012, 318 patients with primary invasive breast cancer were treated with a median of 6 cycles of NACT; they received either an anthracycline-based FEC 100 protocol (31.1%), or anthracyclines + taxanes (53.5%), with trastuzumab if indicated (15.4%). After a median follow-up of 44.2 months, the pathological complete response rate according to the classification of Chevallier et al. [Am J Clin Oncol 1993;16:223-228] was 19.3%, and overall (OS) and disease-free survival (DFS) at 10 years were 60.2 and 69.6%, respectively. Univariate analyses demonstrated that the Residual Disease in Breast and Nodes (RDBN) index was the most significant prognostic factor for OS (p = 0.0082) and DFS (p = 0.0022), and multivariate analyses mainly revealed that the residual tumor size, residual involved node number and post-chemotherapy Scarff-Bloom-Richardson (SBR) grading were the most significant prognostic factors. In a cohort of patients who were all homogeneously treated with some of the most common drugs for breast cancer, we demonstrate that NACT may provide additional prognostic factors and confirm the RDBN index. As this index allows for the prediction of survival with different breast cancer subtypes, we suggest that it should be calculated routinely to help clinicians to select patients who need adjuvant treatments. 2015 S. Karger AG, Basel

Developing an Integrated Model Framework for the Assessment of Sustainable Agricultural Residue Removal Limits for Bioenergy Systems

Energy Technology Data Exchange (ETDEWEB)

David Muth, Jr.; Jared Abodeely; Richard Nelson; Douglas McCorkle; Joshua Koch; Kenneth Bryden

2011-08-01

Agricultural residues have significant potential as a feedstock for bioenergy production, but removing these residues can have negative impacts on soil health. Models and datasets that can support decisions about sustainable agricultural residue removal are available; however, no tools currently exist capable of simultaneously addressing all environmental factors that can limit availability of residue. The VE-Suite model integration framework has been used to couple a set of environmental process models to support agricultural residue removal decisions. The RUSLE2, WEPS, and Soil Conditioning Index models have been integrated. A disparate set of databases providing the soils, climate, and management practice data required to run these models have also been integrated. The integrated system has been demonstrated for two example cases. First, an assessment using high spatial fidelity crop yield data has been run for a single farm. This analysis shows the significant variance in sustainably accessible residue across a single farm and crop year. A second example is an aggregate assessment of agricultural residues available in the state of Iowa. This implementation of the integrated systems model demonstrates the capability to run a vast range of scenarios required to represent a large geographic region.

Generation of low-Btu fuel gas from agricultural residues experiments with a laboratory scale gas producer

Energy Technology Data Exchange (ETDEWEB)

Williams, R O

1977-01-01

Two successive laboratory-scale, downdraft gas producers were fabricated and tested. Agricultural and food processing residues including walnut shells, corn cobs, tree prunings, and cotton gin waste, were converted to a low Btu producer gas. The performance of 2 spark ignition engines, when running on producer gas, was highly satisfactory. The ability of the producer to maintain a continuous supply of good quality gas was determined largely by firebox configuration. Fuel handling and fuel flow control problems tended to be specific to individual types of residues. During each test run, air input, firebox temperature, fuel consumption rate, and pressure differential across the producer were monitored. An overall conversion efficiency of 65% was achieved.

Assessing the potentials of agricultural residues for energy: What the CDM experience of India tells us about their availability

International Nuclear Information System (INIS)

Milhau, Antoine; Fallot, Abigail

2013-01-01

The potential of agricultural residues has been assessed worldwide and at different scales. Interpreting results so as to determine the possible role of this biomass feedstock in energy supplies, requires a clearer understanding of the conditions in which residues can effectively be mobilized for energy production. The experience of India with hundreds of projects where agricultural residues are transformed to heat and power partially sold to the grid, is analyzed and checked against the residue potentials that have been assessed in this country. We find that, in the absence of technological improvements in biomass conversion, the apparent success of Indian bioenergy projects is not sustainable in the long run due to rapid exhaustion effects on residue availability, coupled with the increasing costs that would be difficult to compensate by higher electricity tariffs. We also identify there is a serious agricultural issue which needs to be addressed in regard to degraded soils; this could lead to the reallocation of all primary residues, as well as part of secondary residues to soil and livestock needs. Such perspectives are considered within three contrasted scenario storylines. - Highlights: • India generates 572.10 6 t crop residues, 15–25% are potentially available. • Registered CDM projects for electricity generation use 17% of this energy source. • Some residues will be exhausted before the implementation of planned projects. • Residue scarcity translates to new markets with rising prices. • Increased tariffs will be necessary to compensate biomass cost increase

Espresso coffee residues as a nitrogen amendment for small-scale vegetable production.

Science.gov (United States)

Cruz, Soraia; Marques dos Santos Cordovil, Cláudia S C

2015-12-01

Espresso coffee grounds constitute a residue which is produced daily in considerable amounts, and is often pointed out as being potentially interesting for plant nutrition. Two experiments (incubations and field experiments) were carried out to evaluate the potential nitrogen (N) and phosphorus (P) supply for carrot (Daucus carota L.), spinach (Spinacea oleracea L.) and lettuce (Lactuca sativa L.) nutrition. Immobilisation of nitrogen and phosphorus was detected in all the incubations and, in the field experiments, germination and yield growth were decreased by the presence of espresso coffee grounds, in general for all the species studied. The study showed an inhibition of N and P mineralisation and a reduction of plant germination and growth. Further research is required to determine whether this is related to the immobilising capacity of the residue or possibly due to the presence of caffeine. © 2015 Society of Chemical Industry.

Modern bioenergy from agricultural and forestry residues in Cameroon: Potential, challenges and the way forward

International Nuclear Information System (INIS)

Ackom, Emmanuel K.; Alemagi, Dieudonne; Ackom, Nana B.; Minang, Peter A.; Tchoundjeu, Zac

2013-01-01

Environmentally benign modern bioenergy is widely acknowledged as a potential substitute for fossil fuels to offset the human dependence on fossil fuels for energy. We have profiled Cameroon, a country where modern bioenergy remains largely untapped due to a lack of availability of biomass data and gaps in existing policies. This study assessed the biomass resource potential in Cameroon from sustainably extracted agricultural and forest residues. We estimated that environmentally benign residues amount to 1.11 million bone dry tons per year. This has the potential to yield 0.12–0.32 billion liters of ethanol annually to displace 18–48% of the national consumption of gasoline. Alternatively, the residues could provide 0.08–0.22 billion liters of biomass to Fischer Tropsch diesel annually to offset 17–45% of diesel fuel use. For the generation of bioelectricity, the residues could supply 0.76–2.02 TW h, which is the equivalent of 15–38% of Cameroon's current electricity consumption. This could help spread electricity throughout the country, especially in farming communities where the residues are plentiful. The residues could, however, offset only 3% of the national consumption of traditional biomass (woodfuel and charcoal). Policy recommendations that promote the wider uptake of modern bioenergy applications from residues are provided. - Highlights: • Environmentally benign residues amount to 1.11×10 6 bone dry tonnes per annum. • 0.12–0.32 billion litres of bio ethanol annually to displace 18–48% national gasoline use. • 0.08–0.22 billion litres of biomass to BTL diesel per year to offset 17–45% of diesel use. • 0.76–2.02 TW h of electricity, representing 15–38% of Cameroon's consumption. • Residues could offset only 3% of national consumption of traditional biomass

gRINN: a tool for calculation of residue interaction energies and protein energy network analysis of molecular dynamics simulations.

Science.gov (United States)

Serçinoglu, Onur; Ozbek, Pemra

2018-05-25

Atomistic molecular dynamics (MD) simulations generate a wealth of information related to the dynamics of proteins. If properly analyzed, this information can lead to new insights regarding protein function and assist wet-lab experiments. Aiming to identify interactions between individual amino acid residues and the role played by each in the context of MD simulations, we present a stand-alone software called gRINN (get Residue Interaction eNergies and Networks). gRINN features graphical user interfaces (GUIs) and a command-line interface for generating and analyzing pairwise residue interaction energies and energy correlations from protein MD simulation trajectories. gRINN utilizes the features of NAMD or GROMACS MD simulation packages and automatizes the steps necessary to extract residue-residue interaction energies from user-supplied simulation trajectories, greatly simplifying the analysis for the end-user. A GUI, including an embedded molecular viewer, is provided for visualization of interaction energy time-series, distributions, an interaction energy matrix, interaction energy correlations and a residue correlation matrix. gRINN additionally offers construction and analysis of Protein Energy Networks, providing residue-based metrics such as degrees, betweenness-centralities, closeness centralities as well as shortest path analysis. gRINN is free and open to all users without login requirement at http://grinn.readthedocs.io.

INFLUENCE OF MACHINING TECHNOLOGIES ON VALUES OF RESIDUAL STRESSES OF OXIDE CUTTING CERAMICS

Directory of Open Access Journals (Sweden)

Jakub Němeček

2017-07-01

Full Text Available Currently, the intensive development of engineering ceramic and effort to replace sintered carbides as cutting materials are in progress. With the development of the sintering technology it is now possible to produce compact ceramic cutting samples with very good mechanical properties. The advantage of these materials is their easy accessibility and low purchase price. In this work, the influence of the finishing machine technology on the values of surface residual stresses of cutting ceramic samples Al2O3+TiC were studying. The samples were supplied by Moscow State University of Technology STANKIN. Measurements made in the X-ray diffraction laboratory at the Department of solid state engineering were performed for both the phases. The influence of the parameters of machining to residual stresses was studied and the resulting values were compared with each other.

Method of producing pitch (distillation residue)

Energy Technology Data Exchange (ETDEWEB)

Stepanenko, M.A.; Belkina, T.V.; Krysin, V.P.

1979-08-15

A method is proposed for producing pitch by mixing hard coal pitch with anthracene fraction and thermal treatment of the mixture. The method is distinguished in that in order to increase the quality of the pitch, the anthracene fraction is subjected to thermal treatment at 250-300/sup 0/ for 10-13 hours in the presence of air. This duration of heat treatment allows one to build up in the anthracene fraction up to 20-24% of material which is not soluble and toluene, without the formation of products which are not soluble in quinoline. The fraction prepared in this manner is inserted into the initial pitch in the ratio 1:2 up to 1:9, the mixture is subject to heat treatment at temperature 360-380/sup 0/ and air consumption 7-91/kgX hours until the production of pitch with softening temperature of 85-90/sup 0/. As the initial raw material we used pitch with softening temperature of 60/sup 0/, content of substances which are not soluble in quinoline, 2.0% which are not soluble and toluene 20.6% and coking residue of 49.2%. Example. 80 grams of anthracene fraction is added to 320 grams of pitch. The anthracene fraction is subjected previously to heat treatment at 300/sup 0/ for 13 hours in the presence of air, supplied in the amount of 9 liters per hour. As a result of the heat treatment of the content of materials which are not soluble in toluence in the anthracene fraction is 24.0%, in quinoline it is 0.1%. The ratio of a pitch and thermally treated anthracene fraction in the mixture was 4:l. The produced mixture was subjected to heat treatment at 360/sup 0/ for 1.5 hours with air supply in the amount of 7 liters/ kilograms/hours. Pitch is produced with the following characteristics: softening temperature 88/sup 0/, content of substances which are not soluble in toluene 32.5%, in quinilone, 6.0%, coking residue, 56.7%. The invention can be used in the chemical coking and petrochemical industry.

Modelling Of Residual Stresses Induced By High Speed Milling Process

International Nuclear Information System (INIS)

Desmaison, Olivier; Mocellin, Katia; Jardin, Nicolas

2011-01-01

Maintenance processes used in heavy industries often include high speed milling operations. The reliability of the post-process material state has to be studied. Numerical simulation appears to be a very interesting way to supply an efficient residual stresses (RS) distribution prediction.Because the adiabatic shear band and the serrated chip shaping are features of the austenitic stainless steel high speed machining, a 2D high speed orthogonal cutting model is briefly presented. This finite element model, developed on Forge registered software, is based on data taken from Outeiro and al.'s paper [1]. A new behaviour law fully coupling Johnson-Cook's constitutive law and Latham and Cockcroft's damage model is detailed in this paper. It ensures results that fit those found in literature.Then, the numerical tools used on the 2D model are integrated to a 3D high speed milling model. Residual stresses distribution is analysed, on the surface and into the depth of the material. Various revolutions and passes of the two teeth hemispheric mill on the workpiece are simulated. Thus the sensitivity of the residual stresses generation to the cutting conditions can be discussed. In order to validate the 3D model, a comparison of the cutting forces measured by EDF R and D to those given by numerical simulations is achieved.

Alternate switching between MFC and MEC for H2O2 synthesis and residual removal in Bioelectro-Fenton system

DEFF Research Database (Denmark)

Zhang, Yifeng; Angelidaki, Irini

2016-01-01

Sustainable H2O2 supply and elimination of residual H2O2 are two key challenges to the Fenton processes treating recalcitrant contaminants. In this study, an innovative Bioelectro-Fenton system capable of alternate switching between microbial electrolysis cell (MEC) and microbial fuel cell (MFC......) mode of operation was developed to meet the challenges. In the MEC mode, H2O2 was electrochemically produced which reacts with Fenton’s reagent (Fe II) to form hydroxyradical. The residual H2O2 (unused H2O2) is removed as electron acceptor by switching the system to MFC mode. Complete decolorization...

Ecological balance between supply and demand based on cultivated land ecological footprint method in Guizhou Province

Science.gov (United States)

Qian, Qinghuan; Zhou, Dequan; Bai, Xiaoyong; Xiao, Jianyong; Chen, Fei; Zeng, Cheng

2018-01-01

In order to construct the indicators of the balance between supply and demand of the cultivated land ecological carrying capacity, basing on the relation of the cultivated land ecological carrying capacity supply and demand, applying the model of Cultivated Land Ecological Footprints and the method of CIS and considering the factors of cultivated land production, taking the statistical data of 2015 as an example, and then made a systematic evaluation of the balance between supply and demand of the cultivated land ecological carrying capacity in Guizhou Province. The results show that (1) the spatial distribution of supply and demand of cultivated land ecological carrying capacity in Guizhou is unbalanced, and the northern and eastern parts are the overloading area, the middle, the south and the west parts are the balance area. (2) From the perspective of cultivated land structure, the crops with ecological carrying capacity surplus were rice, vegetables and peanuts, among which rice was the highest and the ecological balance index was 0.7354. The crops with ecological carrying capacity overload were potato, wheat, maize, rapeseeds, soybeans and cured tobacco, of which the index of potato up to 7.11, other types of indices are less than 1.5. The research can provide the ecological security early warning, the overall plan of land use and sustainable development of the area cultivated land with scientific evidence and decision support.

Health evaluation of drinking water regarding to scaling and corrosion potential using corrosion indexes in Noorabad city, Iran

Directory of Open Access Journals (Sweden)

ghodratolah Shams Khorramabadi

2016-05-01

Conclusion: Result obtained from studied indexes showed that the drinking water in Noorabad is corrosive and so the water quality in water supply system should be monitored continuously. The best applicable practices for decreasing water corrosion in water supply system are including continuous control of pH, chlorination mechanism and the use of corrosion resistant pipelines and facilities.

Incorporating residual temperature and specific humidity in predicting weather-dependent warm-season electricity consumption

Science.gov (United States)

Guan, Huade; Beecham, Simon; Xu, Hanqiu; Ingleton, Greg

2017-02-01

Climate warming and increasing variability challenges the electricity supply in warm seasons. A good quantitative representation of the relationship between warm-season electricity consumption and weather condition provides necessary information for long-term electricity planning and short-term electricity management. In this study, an extended version of cooling degree days (ECDD) is proposed for better characterisation of this relationship. The ECDD includes temperature, residual temperature and specific humidity effects. The residual temperature is introduced for the first time to reflect the building thermal inertia effect on electricity consumption. The study is based on the electricity consumption data of four multiple-street city blocks and three office buildings. It is found that the residual temperature effect is about 20% of the current-day temperature effect at the block scale, and increases with a large variation at the building scale. Investigation of this residual temperature effect provides insight to the influence of building designs and structures on electricity consumption. The specific humidity effect appears to be more important at the building scale than at the block scale. A building with high energy performance does not necessarily have low specific humidity dependence. The new ECDD better reflects the weather dependence of electricity consumption than the conventional CDD method.

Estimation of microbial protein supply of lactating dairy cows under smallholder farms in north-east Thailand using urinary purine derivative technique

International Nuclear Information System (INIS)

Pimpa, O.; Liang, J.B.

2004-01-01

Two experiments were conducted to examine the potential of urinary purine derivative (PD) as a predictive index of microbial protein supply in ruminant livestock under farm conditions. Results of Experiment 1 indicated that diurnal variation in the PDC index ( [mmol/L PD]/[mmol/L creatinine] kgW 0.75 ) in spot urine samples of zebu cattle was small and highly correlated with the daily PD output, suggesting that spot urine samples could be used to derive an index for estimating microbial protein supply of cattle under farm conditions. However, the PDC index for buffaloes was poorly correlated to daily urinary PD output, therefore the use of spot urine samples appeared to be unsuitable for buffaloes. Based on the above results, spot urine samples were used to estimate the microbial protein supply of lactating dairy cows under farm conditions in a follow-up experiment. The study was conducted using 24 lactating cows in 6 smallholder dairy farms situated in Khon Kaen province of Northeast Thailand. The study was conducted over two climatic seasons (raining and dry), where the animals were fed 5 kg of farm-mixed concentrate feed supplemented either with green grass (cut or grazing) or rice straw as roughage source during the raining and dry seasons, respectively. The results indicated that microbial protein supply was not significantly different and therefore, the nutritional status of the lactating cows was not significantly different between the two seasons. The absence of differences in milk yield between seasons seems to support our findings. We conclude that urinary PD technique could be used to estimate rumen microbial protein production for dairy cattle under farm conditions. (author)

A survey of residual analysis and a new test of residual trend.

Science.gov (United States)

McDowell, J J; Calvin, Olivia L; Klapes, Bryan

2016-05-01

A survey of residual analysis in behavior-analytic research reveals that existing methods are problematic in one way or another. A new test for residual trends is proposed that avoids the problematic features of the existing methods. It entails fitting cubic polynomials to sets of residuals and comparing their effect sizes to those that would be expected if the sets of residuals were random. To this end, sampling distributions of effect sizes for fits of a cubic polynomial to random data were obtained by generating sets of random standardized residuals of various sizes, n. A cubic polynomial was then fitted to each set of residuals and its effect size was calculated. This yielded a sampling distribution of effect sizes for each n. To test for a residual trend in experimental data, the median effect size of cubic-polynomial fits to sets of experimental residuals can be compared to the median of the corresponding sampling distribution of effect sizes for random residuals using a sign test. An example from the literature, which entailed comparing mathematical and computational models of continuous choice, is used to illustrate the utility of the test. © 2016 Society for the Experimental Analysis of Behavior.

The natural gas: to guarantee a reasonable cost supply; Le gaz naturel: garantir un approvisionnement a un cout raisonnable

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

The France has got only a few natural gas resources, which will disappear in 2013. Thus it essentially depends on international markets for its supplying. Most of the supplying contracts are long dated contracts indexed on the petroleum products. Since 2005 the pressures of the petroleum and gas markets produce tariffs increases. Facing this situation the Government implemented a tariff fixation policy. (A.L.B.)

Forest biomass supply chains in Ireland: A life cycle assessment of GHG emissions and primary energy balances

International Nuclear Information System (INIS)

Murphy, Fionnuala; Devlin, Ger; McDonnell, Kevin

2014-01-01

Highlights: • Wood energy supply chains are analysed for energy requirements and GHG emissions. • Use of residues and stumps for energy is evaluated for Irish conditions. • Results highlight transportation as the most energy and GHG emission intensive step. • Wood energy compares favourably with other biomass sources and fossil fuels. - Abstract: The demand for wood for energy production in Ireland is predicted to double from 1.5 million m 3 over bark (OB) in 2011 to 3 million m 3 OB by 2020. There is a large potential for additional biomass recovery for energetic purposes from both thinning forest stands and by harvesting of tops and branches, and stumps. This study builds on research within the wood-for-energy concept in Ireland by analysing the energy requirements and greenhouse gas emissions associated with thinning, residue bundling and stump removal for energy purposes. To date there have been no studies on harvesting of residues and stumps in terms of energy balances and greenhouse gas emissions across the life cycle in Ireland. The results of the analysis on wood energy supply chains highlights transport as the most energy and greenhouse gas emissions intensive step in the life cycle. This finding illustrates importance of localised production and use of forest biomass. Production of wood chip, and shredded bundles and stumps, compares favourably with both other sources of biomass in Ireland and fossil fuels

Effects of oil and oil burn residues on seabird feathers

DEFF Research Database (Denmark)

Fritt-Rasmussen, Janne; Linnebjerg, Jannie Fries; Sørensen, Martin X.

2016-01-01

It is well known, that in case of oil spill, seabirds are among the groups of animals most vulnerable. Even small amounts of oil can have lethal effects by destroying the waterproofing of their plumage, leading to loss of insulation and buoyancy. In the Arctic these impacts are intensified....... To protect seabirds, a rapid removal of oil is crucial and in situ burning could be an efficient method. In the present work exposure effects of oil and burn residue in different doses was studied on seabird feathers from legally hunted Common eider (Somateria mollissima) by examining changes in total weight...... of the feather and damages on the microstructure (Amalgamation Index) of the feathers before and after exposure. The results of the experiments indicate that burn residues from in situ burning of an oil spill have similar or larger fouling and damaging effects on seabird feathers, as compared to fresh oil....

Agro-energy supply chain planning: a procedure to evaluate economic, energy and environmental sustainability

Directory of Open Access Journals (Sweden)

Fabrizio Ginaldi

2012-07-01

Full Text Available The increasing demand for energy and expected shortage in the medium term, solicit innovative energy strategies to fulfill the increasing gap between demand-supply. For this purpose it is important to evaluate the potential supply of the energy crops and finding the areas of EU where it is most convenient. This paper proposes an agro-energy supply chain approach to planning the biofuel supply chain at a regional level. The proposed methodology is the result of an interdisciplinary team work and is aimed to evaluate the potential supply of land for the energy production and the efficiency of the processing plants considering simultaneously economic, energy and environmental targets. The crop simulation, on the basis of this approach, takes into account environmental and agricultural variables (soil, climate, crop, agronomic technique that affect yields, energy and economic costs of the agricultural phase. The use of the Dijkstra’s algorithm allows minimizing the biomass transport path from farm to collecting points and the processing plant, to reduce both the transport cost and the energy consumption. Finally, a global sustainability index (ACSI, Agro-energy Chain Sustainability Index is computed combining economic, energy and environmental aspects to evaluate the sustainability of the Agroenergy supply chain (AESC on the territory. The empirical part consists in a pilot study applied to the whole plain of Friuli Venezia Giulia (FVG a region situated in the North-Eastern part of Italy covering about 161,300 ha. The simulation has been applied to the maize cultivation using three different technologies (different levels of irrigation and nitrogen fertilization: low, medium and high input. The higher input technologies allow to achieve higher crop yields, but affect negatively both the economic and energy balances. Low input levels provides, on the average, the most favourable energy and economic balances. ACSI indicates that low inputs levels

Energy transition index Germany 2020+. New compass for the turnaround; Energiewende-Index Deutschland 2020+. Neuer Kompass fuer die Wende

Energy Technology Data Exchange (ETDEWEB)

Vahlenkamp, Thomas; Kropeit, Julia [McKinsey and Company, Duesseldorf (Germany); Ritzenhofen, Ingmar [McKinsey and Company, Koeln (Germany); Gersema, Gerke [McKinsey and Company, Berlin (Germany)

2017-10-15

Does the energy transition keep what it once promised? Five years after the first index survey, the balance sheet is mixed: While key objectives such as the reduction of CO{sub 2} emissions are not achieved, important new tasks are lacking in target marks - such as the decarbonisation of the heating and transport sector or the interplay of central and decentralized supply. The energy transition index addresses these future topics with new indicators and calculation bases. Now it is up to the next federal government to set the right course so that the energy transition becomes a success story. The formulation of less, consistent and clear goals rank first. [German] Haelt die Energiewende, was sie einst versprochen hat? Fuenf Jahre nach der ersten Index-Erhebung faellt die Bilanz gemischt aus: Waehrend zentrale Ziele wie die Reduktion der CO{sub 2}-Emissionen nicht erreicht werden, fehlt es fuer wichtige neue Aufgaben an verbindlichen Zielmarken - etwa zur Dekarbonisierung des Waerme- und Verkehrssektors oder zum Zusammenspiel von zentraler und dezentraler Versorgung. Der Energiewende-Index adressiert diese Zukunftsthemen mit neuen Indikatoren und Berechnungsgrundlagen. Jetzt ist es an der kommenden Bundesregierung, die richtigen Weichen zu stellen, damit die Energiewende zur Erfolgsgeschichte wird. Die Formulierung weniger, konsistenter und klarer Ziele steht dabei an erster Stelle.

Spatial Variability Mapping of Crop Residue Using Hyperion (EO-1 Hyperspectral Data

Directory of Open Access Journals (Sweden)

Abderrazak Bannari

2015-06-01

Full Text Available Soil management practices that maintain crop residue cover and reduce tillage improve soil structure, increase organic matter content in the soil, positively influence water infiltration, evaporation and soil temperature, and play an important role in fixing CO2 in the soil. Consequently, good residue management practices on agricultural land have many positive impacts on soil quality, crop production quality and decrease the rate of soil erosion. Several studies have been undertaken to develop and test methods to derive information on crop residue cover and soil tillage using empirical and semi-empirical methods in combination with remote sensing data. However, these methods are generally not sufficiently rigorous and accurate for characterizing the spatial variability of crop residue cover in agricultural fields. The goal of this research is to investigate the potential of hyperspectral Hyperion (Earth Observing-1, EO-1 data and constrained linear spectral mixture analysis (CLSMA for percent crop residue cover estimation and mapping. Hyperion data were acquired together with ground-reference measurements for validation purposes at the beginning of the agricultural season (prior to spring crop planting in Saskatchewan (Canada. At this time, only bare soil and crop residue were present with no crop cover development. In order to extract the crop residue fraction, the images were preprocessed, and then unmixed considering the entire spectral range (427 nm–2355 nm and the pure spectra (endmember. The results showed that the correlation between ground-reference measurements and extracted fractions from the Hyperion data using CLMSA showed that the model was overall a very good predictor for crop residue percent cover (index of agreement (D of 0.94, coefficient of determination (R2 of 0.73 and root mean square error (RMSE of 8.7% and soil percent cover (D of 0.91, R2 of 0.68 and RMSE of 10.3%. This performance of Hyperion is mainly due to the

Construction of prediction intervals for Palmer Drought Severity Index using bootstrap

Science.gov (United States)

Beyaztas, Ufuk; Bickici Arikan, Bugrayhan; Beyaztas, Beste Hamiye; Kahya, Ercan

2018-04-01

In this study, we propose an approach based on the residual-based bootstrap method to obtain valid prediction intervals using monthly, short-term (three-months) and mid-term (six-months) drought observations. The effects of North Atlantic and Arctic Oscillation indexes on the constructed prediction intervals are also examined. Performance of the proposed approach is evaluated for the Palmer Drought Severity Index (PDSI) obtained from Konya closed basin located in Central Anatolia, Turkey. The finite sample properties of the proposed method are further illustrated by an extensive simulation study. Our results revealed that the proposed approach is capable of producing valid prediction intervals for future PDSI values.

Supply Chain Connectivity: Enhancing Participation in the Global Supply Chain

OpenAIRE

Patalinghug, Epictetus E.

2015-01-01

Supply chain connectivity is vital for the efficient flow of trade among APEC economies. This paper reviews the literature and supply chain management, describes the barriers to enhancing participation in global supply chain, analyzes the various measures of supply chain performance, and suggests steps for the Philippines to fully reap the benefits of the global value chain.

The German 2020 Energy Turnaround Index featuring a special focus on economic efficiency; Energiewende-Index Deutschland 2020. Fokusthema Wirtschaftlichkeit

Energy Technology Data Exchange (ETDEWEB)

Vahlenkamp, Thomas [McKinsey and Company, Duesseldorf (Germany); Gohl, Matthias [McKinsey and Company, Berlin (Germany)

2012-12-15

The decision to raise the levy imposed by the Renewable Energies Law has kindled the discussion as to how the energy turnaround can best be implemented and made affordable in the first place. The search for solutions should be founded on as full a picture of the situation as possible as well as a fact base shared by all. The aspiration and purpose of the German 2020 Energy Turnaround Index created by McKinsey and Company is to create precisely such a fact base. Every 3 months the index gives an update on the status of the energy turnaround based on 15 indicators. The present update additionally takes a closer look at the aspect of economic efficiency, which together with climate and environment protection and security of supply forms the triad of imperatives driving the energy turnaround.

Modelling the potential role of forest thinning in maintaining water supplies under a changing climate across the conterminous United States

Science.gov (United States)

Ge Sun; Peter V. Caldwell; Steven G. McNulty

2015-01-01

The goal of this study was to test the sensitivity of water yield to forest thinning and other forest management/disturbances and climate across the conterminous United States (CONUS). Leaf area index (LAI) was selected as a key parameter linking changes in forest ecosystem structure and functions. We used the Water Supply Stress Index model to examine water yield...

Effectiveness of Practicing Supply Chain Management in Construction Site

Directory of Open Access Journals (Sweden)

Mamter S.

2014-01-01

Full Text Available Construction Supply chain management comprised of the network of organization involved in the different processes and activities which produce the material, components and services that come together to design, procurement and deliver a building. It also consists of different organizations involved in the construction process including client/owner, designer, contractor, subcontractor and suppliers. This paper shall present on the implementation of supply chain management in construction and the effectiveness of practicing SCM in construction site. A field study is done from the viewpoint of contractor and consultant then analysed by using average index methods and presented in a statistical analysis. From the analysis, it reveals that effectiveness of practicing the SCM give a lot of good performances and granted benefits to contractor. The statistical analysis produced first ranking effectiveness of SCM is can minimize waste of material and labor for construction project.

A Supply-Chain Analysis Framework for Assessing Densified Biomass Solid Fuel Utilization Policies in China

Directory of Open Access Journals (Sweden)

Wenyan Wang

2015-07-01

Full Text Available Densified Biomass Solid Fuel (DBSF is a typical solid form of biomass, using agricultural and forestry residues as raw materials. DBSF utilization is considered to be an alternative to fossil energy, like coal in China, associated with a reduction of environmental pollution. China has abundant biomass resources and is suitable to develop DBSF. Until now, a number of policies aimed at fostering DBSF industry have been proliferated by policy makers in China. However, considering the seasonality and instability of biomass resources, these inefficiencies could trigger future scarcities of biomass feedstocks, baffling the resilience of biomass supply chains. Therefore, this review paper focuses on DBSF policies and strategies in China, based on the supply chain framework. We analyzed the current developing situation of DBSF industry in China and developed a framework for policy instruments based on the supply chain steps, which can be used to identify and assess the deficiencies of current DBSF industry policies, and we proposed some suggestions. These findings may inform policy development and identify synergies at different steps in the supply chain to enhance the development of DBSF industry.

Impact of agriculture crop residue burning on atmospheric aerosol loading – a study over Punjab State, India

Directory of Open Access Journals (Sweden)

Darshan Singh

2010-02-01

Full Text Available The present study deals with the impact of agriculture crop residue burning on aerosol properties during October 2006 and 2007 over Punjab State, India using ground based measurements and multi-satellite data. Spectral aerosol optical depth (AOD and Ångström exponent (α values exhibited larger day to day variation during crop residue burning period. The monthly mean Ångström exponent "α" and turbidity parameter "β" values during October 2007 were 1.31±0.31 and 0.36±0.21, respectively. The higher values of "α" and "β" suggest turbid atmospheric conditions with increase in fine mode aerosols over the region during crop residue burning period. AURA-OMI derived Aerosol Index (AI and Nitrogen dioxide (NO2 showed higher values over the study region during October 2007 compared to October 2006 suggesting enhanced atmospheric pollution associated with agriculture crop residue burning.

Determine metrics and set targets for soil quality on agriculture residue and energy crop pathways

Energy Technology Data Exchange (ETDEWEB)

Ian Bonner; David Muth

2013-09-01

There are three objectives for this project: 1) support OBP in meeting MYPP stated performance goals for the Sustainability Platform, 2) develop integrated feedstock production system designs that increase total productivity of the land, decrease delivered feedstock cost to the conversion facilities, and increase environmental performance of the production system, and 3) deliver to the bioenergy community robust datasets and flexible analysis tools for establishing sustainable and viable use of agricultural residues and dedicated energy crops. The key project outcome to date has been the development and deployment of a sustainable agricultural residue removal decision support framework. The modeling framework has been used to produce a revised national assessment of sustainable residue removal potential. The national assessment datasets are being used to update national resource assessment supply curves using POLYSIS. The residue removal modeling framework has also been enhanced to support high fidelity sub-field scale sustainable removal analyses. The framework has been deployed through a web application and a mobile application. The mobile application is being used extensively in the field with industry, research, and USDA NRCS partners to support and validate sustainable residue removal decisions. The results detailed in this report have set targets for increasing soil sustainability by focusing on primary soil quality indicators (total organic carbon and erosion) in two agricultural residue management pathways and a dedicated energy crop pathway. The two residue pathway targets were set to, 1) increase residue removal by 50% while maintaining soil quality, and 2) increase soil quality by 5% as measured by Soil Management Assessment Framework indicators. The energy crop pathway was set to increase soil quality by 10% using these same indicators. To demonstrate the feasibility and impact of each of these targets, seven case studies spanning the US are presented

Biomass supply in EU27 from 2010 to 2030

International Nuclear Information System (INIS)

Panoutsou, Calliope; Eleftheriadis, John; Nikolaou, Anastasia

2009-01-01

With biomass staying high in the EU political agenda and most of the recent documents acknowledging that it has the potential to make a very significant contribution to reaching the 20% target [], the issue of supply in terms of feedstock types, availability constraints and costs in different Member States is set to determine the future technology uptake and market deployment prospects. This paper is based on one of the initial studies, 'Bioenergy's role in the EU market. A view of developments until 2020', and presents a structured review for EU biomass resources, aiming to map technical potentials and provide detailed information on availability, costs and future trends for biomass potentials of different residual feedstocks in EU27. (author)

Alignment of global supply networks based on strategic groups of supply chains

Directory of Open Access Journals (Sweden)

Nikos G. Moraitakis

2017-09-01

Full Text Available Background: From a supply chain perspective, often big differences exist between global raw material suppliers’ approaches to supply their respective local markets. The progressing complexity of large centrally managed global supply networks and their often-unknown upstream ramifications increase the likelihood of undetected bottlenecks and inefficiencies. It is therefore necessary to develop an approach to strategically master the upstream complexity of such networks from a holistic supply chain perspective in order to align regional competitive priorities and supply chain structures. The objective of this research is hence to develop an approach for the supply-chain-based alignment of complex global supply networks. Method: We review existing literature from the fields of supply chain and network management, strategic sourcing, and strategic management. Based on the literature review and theoretical and practical considerations we deduce a conceptual approach to consider upstream supply chain structures in supply network alignment initiatives. Results: On the basis of these considerations and current empirical literature we transfer strategic group theory to the supply network management context. The proposed approach introduces strategic groups of supply chains as a segmentation criterion for complex global supply networks which enables the network-wide alignment of competitive priorities. Conclusion: Supply-chain-based segmentation of global supply network structures can effectively reduce the complexity, firms face when aiming to strategically align their supply chains on a holistic level. The results of this research are applicable for certain types of global supply networks and can be used for network alignment and strategy development. The approach can furthermore generate insights useable for negotiation support with suppliers.

A Potential Approach for Low Flow Selection in Water Resource Supply and Management

Science.gov (United States)

Ying Ouyang

2012-01-01

Low flow selections are essential to water resource management, water supply planning, and watershed ecosystem restoration. In this study, a new approach, namely the frequent-low (FL) approach (or frequent-low index), was developed based on the minimum frequent-low flow or level used in minimum flows and/or levels program in northeast Florida, USA. This FL approach was...

Measuring the phase difference in network and residual voltages under the GTsN-195M pump self-starting

International Nuclear Information System (INIS)

Druba, V.V.; Druba, T.A.; Reznik, V.R.

1989-01-01

Determination of time dependence of phase difference of residual voltage on motor windings of the main circulation pumps (MCP) and voltage of power supply section under MCP self-starting under conditions of short-time breaks in electric power supply is one of the main problems to which reliability and safety of NPP operation is related. A method to measure this dependence in real conditions in case of MCP free run-out and run-out in generating mode is suggested. The method considered is used for tests of the Kalinin NPP-2 MCP-195M self-starting. Analysis of run-out curves in the case of a break in MCP power supply for 1.8 s shows that the most favourable conditions for MCP self-starting are 0.63±0.03 s after de-energizing. 2 refs.; 3 figs.; 1 tab

Biomass Residues from Agriculture and Potential Contribution towards Modern Energy Supply in West Africa

DEFF Research Database (Denmark)

Ackom, Emmanuel

2016-01-01

Access to modern energy services especially in developing countries is an urgent issue. Globally, 1.3 billion people do not have access to modern energy and the services associated with it. Sub-Saharan Africa is one of the regions have profound lack of modern energy access. The objective of this ......Access to modern energy services especially in developing countries is an urgent issue. Globally, 1.3 billion people do not have access to modern energy and the services associated with it. Sub-Saharan Africa is one of the regions have profound lack of modern energy access. The objective...... of this paper is to understand the role that residues obtained from agricultural practices could be utilised in providing electricity for use in West African countries. Selected countries include: Ghana, Nigeria, Senegal and Togo. The study utilized methods developed by Mendu et. al. 2012, Mabeeet. al. 2010...

Design and Application of Drought Indexes in Highly Regulated Mediterranean Water Systems

Science.gov (United States)

Castelletti, A.; Zaniolo, M.; Giuliani, M.

2017-12-01

Costs of drought are progressively increasing due to the undergoing alteration of hydro-meteorological regimes induced by climate change. Although drought management is largely studied in the literature, most of the traditional drought indexes fail in detecting critical events in highly regulated systems, which generally rely on ad-hoc formulations and cannot be generalized to different context. In this study, we contribute a novel framework for the design of a basin-customized drought index. This index represents a surrogate of the state of the basin and is computed by combining the available information about the water available in the system to reproduce a representative target variable for the drought condition of the basin (e.g., water deficit). To select the relevant variables and combinatione thereof, we use an advanced feature extraction algorithm called Wrapper for Quasi Equally Informative Subset Selection (W-QEISS). W-QEISS relies on a multi-objective evolutionary algorithm to find Pareto-efficient subsets of variables by maximizing the wrapper accuracy, minimizing the number of selected variables, and optimizing relevance and redundancy of the subset. The accuracy objective is evaluated trough the calibration of an extreme learning machine of the water deficit for each candidate subset of variables, with the index selected from the resulting solutions identifying a suitable compromise between accuracy, cardinality, relevance, and redundancy. The approach is tested on Lake Como, Italy, a regulated lake mainly operated for irrigation supply. In the absence of an institutional drought monitoring system, we constructed the combined index using all the hydrological variables from the existing monitoring system as well as common drought indicators at multiple time aggregations. The soil moisture deficit in the root zone computed by a distributed-parameter water balance model of the agricultural districts is used as target variable. Numerical results show that

Incidence and Residual Risk of HIV, HBV and HCV Infections Among Blood Donors in Tehran.

Science.gov (United States)

Saber, Hamid Reza; Tabatabaee, Seyed Morteza; Abasian, Ali; Jamali, Mostafa; SalekMoghadam, Ebadollah; Hajibeigi, Bashir; Alavian, Seyed Moayed; Mirrezaie, Seyed Mohammad

2017-09-01

Estimation of residual risk is essential to monitor and improve blood safety. Our epidemiologic knowledge in the Iranian donor population regarding transfusion transmitted viral infections (TTIs), is confined to a few studies based on prevalence rate. There are no reports on residual risk of TTIs in Iran. In present survey, a software database of donor records of Tehran Blood Transfusion Center (TBTC) was used to estimate the incidence and residual risk of hepatitis B virus (HBV), hepatitis C virus (HCV) and human immunodeficiency virus (HIV) infections, by applying the incidence rate/window period (IR-WP) model. A total of 1,207,155 repeat donations was included in the analysis and represented a mean of 8.4 donations per donor over 6 years. The incidence amongst repeat donors was estimated by dividing the number of confirmed seroconverting donors by the total number of person-years at risk. The residual risk was calculated using the incidence/window period model. Incidence rate and residual risk for HBV, HCV and HIV infections were calculated for total (2005-2010) and two consecutive periods (2005-2007 and 2008-2010) of the study. According to the IR-WP model, overall residual risk for HIV and HCV in the total study period was 0.4 and 12.5 per million units, respectively and for HBV 4.57/100,000 donations. The incidence and residual risk of TTIs, calculated on TBTC's blood supply was low and comparable with developed countries for HIV infection but high for HCV and HBV infections. Blood safety may therefore be better managed by applying other techniques like nucleic acid amplification tests.

Antimicrobial residues in tissues and eggs of laying hens at Chittagong, Bangladesh

Directory of Open Access Journals (Sweden)

Ariful Islam

2016-12-01

Full Text Available Aim: Antimicrobial residue in animal food products is an important index of food safety. Antimicrobial residues could result from chemotherapeutic or chemoprophylactic use of drugs in food animals. This occurrence of residue in animal food products has received enormous worldwide attention from some local, international, and public health agencies. A crosssectional study was conducted from July to December 2009 to detect the antibiotic residues in tissues and eggs of laying hens at Chittagong of Bangladesh. Materials and Methods: Microbial inhibition test (MIT and thin layer chromatography (TLC methods were used to detect antibacterial residues in poultry tissues (liver, kidney, breast, and thigh muscles and eggs. The bacteria and pH of the MIT method were as follows: Bacillus subtilis on test agar medium with a pH of 7.2, Bacillus cereus with a pH of 6.0, and Escherichia coli at pH with an 8.0. Results: The overall prevalence of antibiotic residues detected by MIT was 64% in liver, 63% in kidney, 56% in breast muscle, 50% in thigh muscle, and 60% in eggs. There was significant variation in results between MIT and TLC (p<0.05. Tetracycline residues were found in 48% in liver, 24% in kidneys, 20% in thigh muscles, 26% in breast muscles, and 36% in eggs. Ciprofloxacin residues were found 46% in liver, 42% in kidneys, 34% in thigh muscles, 30% in breast muscles, and 30% in eggs. Enrofloxacin residues were found 40% in livers, 36% in kidneys, 24% in thigh muscles, 20% in breast muscles, and 26% in eggs. Amoxicillin residues were found 48% in livers, 30% in kidneys, 26% in thigh muscles, 22% in breast muscles, and 24% in eggs. The most frequently detected antibiotic residues by both MIT and TLC were found in liver tissue, tetracycline (48%, ciprofloxacin (46%, enrofloxacin (40%, and amoxicillin (42% were found in liver. Breast muscle tissue was least likely to contain antibiotic residues (24%. Tetracycline (p=0.01 and amoxicillin (p=0.03 residues had

Detection of Severe Respiratory Disease Epidemic Outbreaks by CUSUM-Based Overcrowd-Severe-Respiratory-Disease-Index Model

Directory of Open Access Journals (Sweden)

Carlos Polanco

2013-01-01

Full Text Available A severe respiratory disease epidemic outbreak correlates with a high demand of specific supplies and specialized personnel to hold it back in a wide region or set of regions; these supplies would be beds, storage areas, hemodynamic monitors, and mechanical ventilators, as well as physicians, respiratory technicians, and specialized nurses. We describe an online cumulative sum based model named Overcrowd-Severe-Respiratory-Disease-Index based on the Modified Overcrowd Index that simultaneously monitors and informs the demand of those supplies and personnel in a healthcare network generating early warnings of severe respiratory disease epidemic outbreaks through the interpretation of such variables. A post hoc historical archive is generated, helping physicians in charge to improve the transit and future allocation of supplies in the entire hospital network during the outbreak. The model was thoroughly verified in a virtual scenario, generating multiple epidemic outbreaks in a 6-year span for a 13-hospital network. When it was superimposed over the H1N1 influenza outbreak census (2008–2010 taken by the National Institute of Medical Sciences and Nutrition Salvador Zubiran in Mexico City, it showed that it is an effective algorithm to notify early warnings of severe respiratory disease epidemic outbreaks with a minimal rate of false alerts.

Detection of Severe Respiratory Disease Epidemic Outbreaks by CUSUM-Based Overcrowd-Severe-Respiratory-Disease-Index Model

Science.gov (United States)

Castañón-González, Jorge Alberto; Macías, Alejandro E.; Samaniego, José Lino; Buhse, Thomas; Villanueva-Martínez, Sebastián

2013-01-01

A severe respiratory disease epidemic outbreak correlates with a high demand of specific supplies and specialized personnel to hold it back in a wide region or set of regions; these supplies would be beds, storage areas, hemodynamic monitors, and mechanical ventilators, as well as physicians, respiratory technicians, and specialized nurses. We describe an online cumulative sum based model named Overcrowd-Severe-Respiratory-Disease-Index based on the Modified Overcrowd Index that simultaneously monitors and informs the demand of those supplies and personnel in a healthcare network generating early warnings of severe respiratory disease epidemic outbreaks through the interpretation of such variables. A post hoc historical archive is generated, helping physicians in charge to improve the transit and future allocation of supplies in the entire hospital network during the outbreak. The model was thoroughly verified in a virtual scenario, generating multiple epidemic outbreaks in a 6-year span for a 13-hospital network. When it was superimposed over the H1N1 influenza outbreak census (2008–2010) taken by the National Institute of Medical Sciences and Nutrition Salvador Zubiran in Mexico City, it showed that it is an effective algorithm to notify early warnings of severe respiratory disease epidemic outbreaks with a minimal rate of false alerts. PMID:24069063

Physical and mechanical properties of microcrystalline cellulose prepared from local agricultural residues

International Nuclear Information System (INIS)

El-Sakhawy, M.M.; Hassan, M.L.

2005-01-01

Microcrystalline cellulose (MCC) was prepared from local agricultural residues, namely, bagasse, rice straw, and cotton stalks bleached pulps. Hydrolysis of bleached pulps was carried out using hydrochloric or sulfuric acid to study the effect of the acid used on the properties of produced microcrystalline cellulose such as degree of polymerization (DP), crystallinity index (CrI), crystallite size, bulk density, particle size, and thermal stability. The mechanical properties of tablets made from microcrystalline cellulose of the different agricultural residues were tested and compared to commercial grade MCC. The use of rice straw pulp in different proportions as a source of silica to prepare silicified microcrystalline cellulose (SMCC) was carried out. The effect of the percent of silica on the mechanical properties of tablets before and after wet granulation was tested

Physical and mechanical properties of microcrystalline cellulose prepared from local agricultural residues

Energy Technology Data Exchange (ETDEWEB)

El-Sakhawy, M M; Hassan, M L [Cellulose and Paper Dept., National Research Center, Dokki, Cairo (Egypt)

2005-07-01

Microcrystalline cellulose (MCC) was prepared from local agricultural residues, namely, bagasse, rice straw, and cotton stalks bleached pulps. Hydrolysis of bleached pulps was carried out using hydrochloric or sulfuric acid to study the effect of the acid used on the properties of produced microcrystalline cellulose such as degree of polymerization (DP), crystallinity index (CrI), crystallite size, bulk density, particle size, and thermal stability. The mechanical properties of tablets made from microcrystalline cellulose of the different agricultural residues were tested and compared to commercial grade MCC. The use of rice straw pulp in different proportions as a source of silica to prepare silicified microcrystalline cellulose (SMCC) was carried out. The effect of the percent of silica on the mechanical properties of tablets before and after wet granulation was tested.

Management Methods by Development of Objects of Energy Supply Taking into Account the Combined Risks

Directory of Open Access Journals (Sweden)

Kirillova Ariadna

2016-01-01

Full Text Available In the article the methods of choice of optimal administrative decisions are examined on the development of objects energy supplies of housing and communal services. That would take into account nascent risks related to investment-building activity of energy supplying enterprises. It is shown that the basic condition of housing and utilities on an energy supply is the building of objects with a subsequent production, distribution and realization of electric energy, that allows at their reproduction to provide quality and reliability of energy supply to the consumers. Also the questions of decline of risks and exposure of factors, influencing on the processes of management development of objects of energy supply in the field of housing and utilities, estimation of organizationally-economic reliability and combined risks, estimation of possibility of the use of innovative energy technologies, alternative sources of energy supply, are investigated in the article. It is fixed, that risk indexes must be appraised not only on the investment stage of building object, but also on his operating stage (after commissioning on the basis of account of the great number of risks characterizing the combined risk.

Water supply

International Nuclear Information System (INIS)

Peterson, F.L.

1986-01-01

Options and methodologies for the development of fresh water supplies on Bikini Atoll are much the same as those practiced in the rest of the Marshall Islands and for that matter, most atolls in the central Pacific Ocean Basin. That is, rainfall distribution on Bikini produces a distinct wet season, lasting from about May through November, with the remaining months being generally dry. As a result, fresh water from surface catchments tends to be plentiful during the wet season? but is usually scarce during the dry months, and alternative sources such as groundwater must be utilized during this time. On Bikini the problems of fresh water supply are somewhat more difficult than for most Marshall Island atolls because rainfall is only about half the Marshall Island's average. Tus water supply is a critical factor limiting the carrying capacity of Bikini Atoll. To address this problem BARC has undertaken a study of the Bikini Atoll water supply. Te primary objectives of this work are to determine: (1) alternatives available for fresh water supply, 2 the amounts, location and quality of available supplies and 3 optimal development methods. The study planned for one's year duration, has been underway only since the summer of 1985 and is thus not yet fully completed. However, work done to date, which is presented in this report of preliminary findings, provides a reasonably accurate picture of Bikini's fresh water supplies and the various options available for their development. The work remaining to be completed will mainly add refinements to the water supply picture presented in the sections to follow

Evaluation of residue-residue contact predictions in CASP9

KAUST Repository

Monastyrskyy, Bohdan; Fidelis, Krzysztof; Tramontano, Anna; Kryshtafovych, Andriy

2011-01-01

This work presents the results of the assessment of the intramolecular residue-residue contact predictions submitted to CASP9. The methodology for the assessment does not differ from that used in previous CASPs, with two basic evaluation measures

Combined prediction model for supply risk in nuclear power equipment manufacturing industry based on support vector machine and decision tree

International Nuclear Information System (INIS)

Shi Chunsheng; Meng Dapeng

2011-01-01

The prediction index for supply risk is developed based on the factor identifying of nuclear equipment manufacturing industry. The supply risk prediction model is established with the method of support vector machine and decision tree, based on the investigation on 3 important nuclear power equipment manufacturing enterprises and 60 suppliers. Final case study demonstrates that the combination model is better than the single prediction model, and demonstrates the feasibility and reliability of this model, which provides a method to evaluate the suppliers and measure the supply risk. (authors)

What Can Healthcare Supply Chains Learn from Consumer-Product Supply Chains?

OpenAIRE

Schwarz, Leroy B.

2008-01-01

A Framework for Thinking About Supply-Chain Management: “The IDIB Portfolio” (Information, Decision-making, Implementation, Buffer system) Describe Supply-Chains for Consumer Products Before “Wal-Mart” Describe Supply-Chains for Consumer Products After “Wal-Mart” Describe Stylized Supply Chain for Healthcare Products

China’s inter-regional spillover of carbon emissions and domestic supply chains

International Nuclear Information System (INIS)

Meng, Bo; Xue, Jinjun; Feng, Kuishuang; Guan, Dabo; Fu, Xue

2013-01-01

In this study, we apply the inter-regional input–output model to explain the relationship between China’s inter-regional spillover of CO 2 emissions and domestic supply chains for 2002 and 2007. Based on this model, we propose alternative indicators such as the trade in CO 2 emissions, CO 2 emissions in trade and the regional trade balances of CO 2 emissions. Our results do not only reveal the nature and significance of inter-regional environmental spillover within China’s domestic regions but also demonstrate how CO 2 emissions are created and distributed across regions via domestic and global production networks. Results show that a region’s CO 2 emissions depend on its intra-regional production technology, energy use efficiency, as well as its position and participation degree in domestic and global supply chains. - Highlights: • An IO model is used to measure China’s inter-regional spillover of CO 2 emissions. • We focus on the relationship between CO 2 emissions and domestic supply chains. • New indexes for identifying the consumer–producer responsibility are proposed. • A region’s emission depends on its position and participation level in supply chains

Institutional Change and Governance Indexes in Transition Economies: the case of Poland

Directory of Open Access Journals (Sweden)

Pasquale Tridico

2006-12-01

Full Text Available In the former communist countries, institutional change, i.e. transition towards market economy, is affected not only by introduction of law and formal institutions (change "by design", but also by social norms, old values and habits (informal institutions. I present an empirical paper focusing on transition of the Polish Economy. I used a questionnaire which was administered to a sample of about 1000 Polish firms in order to verify the impact of economic institutions on the "residual productivity". Throughout the questionnaire I built six governance indexes. Then I tested the impact of the governance indexes on the productivity of firms. I observed that the economic performance of the eastern regions of Poland, where governance indexes are worse than western, are poorer than that of the western regions of Poland

Residue management practices and planter attachments for corn production in a conservation agriculture system

Directory of Open Access Journals (Sweden)

J. Nejadi

2013-11-01

Full Text Available Seed placement and failure to establish a uniform plant stand are critical problems associated with production of corn (Zea mays following wheat (Triticum aestivum in a conservation agriculture system in Iran. Our objectives were to evaluate the performance of a corn row- crop planter equipped with two planter attachments (smooth/toothed coulters at six wheat residue management systems (three tillage systems and two levels of surface residue at two forward speeds of 5 and 7 km h-1. Residue retained after planting, seeding depth, emergence rate index (ERI and seed spacing indices were determined. The baled residue plots tilled by chisel plow followed by disc harrow (BRCD resulted in minimum residue after planting as compared to other residue treatments. Furthermore, the maximum values of the ERI and uniformity of plant spacing pertained to this treatment. Other results showed that the ERI increased up to 18% for the toothed coulter as compared to the smooth coulter. The toothed coulter also established a deeper seed placement as compared to the smooth coulter. Planting at forward speed of 5 km h-1 resulted in deeper seeding depth as compared to a forward speed of 7 km h-1. However, lower values of miss and precision indices were obtained at forward speed of 7 km h-1, indicating a more uniformity of plant spacing. Results of this study showed that equipping the conventional planter with toothed coulter and planting in soil prepared under the BRCD residue management system can result in a satisfactory conservation crop production system.

The role of supply chain collaboration in supply chain risk mitigation

OpenAIRE

Chen, Jie

2017-01-01

In the last two decades, supply chain operations have changed drastically. Globalization of the market, shortened product life cycle, global outsourcing and offshoring, and increasing complexity of the supply base has resulted in modern supply chains becoming more vulnerable than ever. There are also more frequent natural or man-made disasters which disrupt the supply chain operations. All these have led to higher exposure of risks of supply chains and the failure to manage the...

Data on microbiological quality assessment of rural drinking water supplies in Poldasht county.

Science.gov (United States)

Yousefi, Mahmood; Saleh, Hossein Najafi; Yaseri, Mehdi; Mahvi, Amir Hossein; Soleimani, Hamed; Saeedi, Zhyar; Zohdi, Sara; Mohammadi, Ali Akbar

2018-04-01

In this research, the villages with water supply systems under the supervision of the Water and Wastewater Company in Poldasht County, Iran in 2015 was studied. 648 samples were taken from 57 villages during 12month period to test for microbial quality according to the latest guidelines of WHO. Fecal coliform, coliform, turbidity, pH and free residual chlorine were analyzed. Also we used linear Regression statistical analysis for collected data. Result of Data showed that 13.6% of the villages under study had contaminated water resources. In 100 percent of the water sample resource the turbidity level was less than Iranian maximum permissible levels (5 NTU). There was a linear relation between the Free residual color and Coliform in different month of follow up ( r = -0.154, P water resources should be comprehensively planned and monitored keeping in view the WHO recommended parameters.

Proceedings of the CERI 2004 Oil Conference : Insecurity of supply? CD-ROM ed.

International Nuclear Information System (INIS)

2004-01-01

The 21 presentations at this conference reflected recent developments in the international petroleum industry with particular focus on the outlook of world energy markets and prospects for oil supply and reserves. Topics of discussion included an outlook for world oil prices, geopolitical hotspots for oil exporting countries, and geopolitical warm spots for the former Soviet Union. The conference also featured a debate on oil supply, prices and markets for Canadian oil. The significant potential of the Western Canadian oil sands reserves was also discussed with reference to oil sands supply outlook and development issues. Several presentations reviewed environmental issues such as climate change and the responsible use of water. The conference also provided an opportunity for participants to discuss the role that non-conventional oil play will play in the current marketplace. Thirteen papers were indexed separately for inclusion in the database. tabs., figs

Macroeconomic Variables Affecting Bist30 Index Value in Turkey

OpenAIRE

Özge KORKMAZ; Eşref Savas BASCI; Süleyman Serdar KARACA

2016-01-01

In finance literature, main financial stock indices are important to determine country’s financial development and it’s behavior against the effect of macro-economic conditions. These conditions can listed as interest rate, inflation rate, money supply, exchange rate, industrial production index, and etc.  In changing world economy, macro economic conditions can affect to the financial stability and capital markets. Some economies have a financial vulnerability, and it is important to measure...

Design of Supply Chain Networks with Supply Disruptions using Genetic Algorithm

OpenAIRE

Taha, Raghda; Abdallah, Khaled; Sadek, Yomma; El-Kharbotly, Amin; Afia, Nahid

2014-01-01

The design of supply chain networks subject to disruptions is tackled. A genetic algorithm with the objective of minimizing the design cost and regret cost is developed to achieve a reliable supply chain network. The improvement of supply chain network reliability is measured against the supply chain cost.

Effect of turning frequency on co-composting pig manure and fungus residue.

Science.gov (United States)

Jiang-Ming, Zhou

2017-03-01

Composting of agricultural wastes not only can reduce environmental pollution caused by improper disposal, but also can recycle agricultural wastes and transform them into highly valuable products, such as fertilizers or soil conditioners, for agricultural applications. However, the composting process and final product are easily affected by the limited oxygen supply that results from insufficient aeration, especially in the center of a large-scale windrow. Hence, a pilot-scale experiment was conducted to investigate the effects of the turning frequency on the composting efficiency and compost quality of used pig manure and fungus residue. Physical and chemical characteristics were measured over the course of 63 days of composting. The data indicate that higher temperatures and more rapid moisture removal generally result from a turning treatment of once every 2-4 days than in fewer, or no, turning treatments. The total nitrogen, total phosphorus, and total potassium contents increased in all windrows as the organic matter content decreased, but both the increases and decrease were greater in windrows that were turned more frequently. The reduction of the organic matter mass by 53.7-66.0% for a turning of once every 2-8 days is significantly higher than that for the static windrow (39.1%). Although there is an increase in nitrogen mass loss with an increased turning frequency, lower nitrogen mass losses (12.7-25.7%) in all treatments were noted compared with previous studies. A final compost product with less moisture, less weight, higher nutrient content (N, P, and K), and greater stability was obtained in windrows with turning frequencies of once every 2-4 days, which is recommended when composting pig manure and fungus residue. Composting of agricultural wastes not only can reduce environmental pollution caused by improper disposal, but recycling of agricultural wastes transforms them into highly valuable products, such as fertilizers or soil conditioners, for

Synchronizing legume residue nutrient release with Kale (Brassica oleracea var. acephala) uptake in a Nitrosol of Kabete, Kenya

DEFF Research Database (Denmark)

Onwonga, Richard N.; Chepkoech, Caroline; Wahome, R.G.

fertility improvement for crop production e.g. kales (Brassica oleracea var. acephala) under organic farming systems. Chickpea (Cicer arietinum) and white lupin (Lupinus albus L.) are leguminous crops commonly intercropped with kales (Genga, 2014) and their influence on crop yield and soil nutrient status...... has been widely studied (Nduku 2014, Genga 2014; Onwonga et al., 2015). There is however a dearth of information with respect to synchronization of nutrient released by legume residues with pattern of nutrient uptake by kales to match their demand. The objective of the current study was therefore...... to assess decomposition and nutrient release rates of chickpea and lupin residues and kale nutrient uptake patterns for better synchrony of nutrient supply and demand....

How war, drought, and management impact water supply in the Tigris/Euphrates

Science.gov (United States)

Hasan, M.; Moody, A.; Benninger, L. K.

2017-12-01

The fast-paced conflicts in the Middle East have the potential to disrupt management and supply of water resources in the region, particularly on structures such as Mosul and Haditha dams, and the Ramadi and Falluja Barrages, all of which have experienced threats or changes in sovereignty. Water supply is also under pressure from upstream dam management and drought. In this research, we use the normalized difference water index (NDWI) applied to Landsat imagery in order to monitor changes in the extent of various water bodies (1985-present). We looked to see if significant anomalies from expected surface area were best explained by conflict, drought, or dam management. Conflict (though not every conflict) produced the greatest sudden changes in water supply; drought produced the greatest absolute changes, but at a gentle pace. Drought impacts are strongest in the furthest downstream reservoirs. Conflict-driven changes were tied to very specific human manipulations in water supply in order to either advance military objectives, "punish" civilians on the wrong side of the fight, or to prevent humanitarian catastrophe. Satellite images allow for an objective analysis of how strong these manipulations were. The information may not be as exact as on-the-ground information, but when the flow of information is disrupted by war, satellite data can be an alternative source of insights into water supply changes.

Growing ethanol sector drives corn supply chain shift for the last decade

Science.gov (United States)

Kim, T.; Schmitt, J.; Brauman, K. A.; Smith, T. M.; Suh, K.

2017-12-01

The US is the largest producer in the world, 89% of corn production uses in domestic demands in 2012. Carbon emission and irrigated water usage in the corn farming stage are hot-spot in the meat production sectors, comprise 37% of all US corn demand. The annual capacity of the ethanol sector increases from 6.5 billion gallons to 15.3 billion gallons for the last decade. The growth of corn demand in ethanol sector makes corn supply chain shift. Most of the ethanol plants located in the Mid-west where is the top 12 corn producing states. Therefore animal feeds take more supply from the other states. The purpose of this study is to estimate environmental impacts and water scarcity associated embedded corn by the temporal and spatial corn supply chain model based on a cost minimization. We use publicly available county-level data on corn production, feed demands, aggregative carbon emission and irrigated water usage in farming state, and a water depletion index as a metric for determining water scarcity. The water stressed counties produce 23.3% of US total corn production in 2012, and the irrigated corn is 14.2%. We simulated the corn supply chain using linear programming and developed the web-based visualization tools called FoodS3 (Food Systems Supply-chain Sustainability tool, http://foods3.org).

Production of crude enzyme from Aspergillus nidulans AKB-25 using black gram residue as the substrate and its industrial applications

Directory of Open Access Journals (Sweden)

Amit Kumar

2016-06-01

Full Text Available The production of crop residues in India is estimated to be about 500–550 million tons annually. It is estimated that about 93 million tons of crop residues is burnt annually which is not only wastage of valuable biomass resources but pollution of the environment with the production of green house gases also. Among different low cost crop residues, black gram residue as the substrate produced maximal endoglucanase, FPase, and β-glucosidase activities from Aspergillus nidulans AKB-25 under solid-state fermentation. During optimisation of cultural parameters A. nidulans AKB-25 produced maximal endoglucanase (152.14 IU/gds, FPase (3.42 FPU/gds and xylanase (2441.03 IU/gds activities. The crude enzyme was found effective for the saccharification of pearl millet stover and bio-deinking of mixed office waste paper. The crude enzyme from A. nidulans AKB-25 produced maximum fermentable sugars of 546.91 mg/g from alkali-pretreated pearl millet stover by saccharification process at a dose of 15 FPU/g of substrate. Pulp brightness and deinking efficiency of mixed office waste paper improved by 4.6% and 25.01% respectively and mitigated dirt counts by 74.70% after bio-deinking. Physical strength properties like burst index, tensile index and double fold number were also improved during bio-deinking of mixed office waste paper.

Report on gas sales regulated tariffs of GDF Suez. Audit of supply costs and of non-supply related costs - May 2015. Deliberation of the Commission for Energy Regulation of the 13 May 2015 bearing approval of the report of analysis of supply and non-supply related costs used as a basis for the calculation of the evolution of natural gas sales regulated tariffs of GDF Suez

International Nuclear Information System (INIS)

Gassin, Helene; Padova, Yann; Sotura, Jean-Pierre; Monteil, Anne; Casadei, Cecile

2015-05-01

After a presentation of the context and objectives of works performed by the CRE (the French commission for energy regulation), and a synthetic presentation of the main conclusions, this report first proposes an assessment for 2014 by presenting and discussing the fact that regulated tariffs have followed a downward trend since the beginning of 2014, that sales at regulated tariffs have strongly decreased, and that GDF Suez costs have been covered by revenues from sales at regulated tariffs. The second part proposes an analysis of the evolution perspectives for supply costs by commenting the calculation formula, the difference between gas market price and LT contract prices, the always stronger indexing of contracts on gas market prices. The last part addresses the perspectives of evolution of non-supply related costs by commenting the taking of infrastructure cost evolution into account, the steadiness of provisional commercial costs, and the consequence of the customer portfolio evolution on the distribution of commercial force costs. Some recommendations are made on the evolution perspectives for supply and non-supply related costs, and on the modalities of assignment of commercial costs among the different types of customers (regulated tariffs or market price)

Contract Coordination in Dual Sourcing Supply Chain under Supply Disruption Risk

Directory of Open Access Journals (Sweden)

Tong Shu

2015-01-01

Full Text Available This paper explores a coordination model for a three-echelon supply chain including two different manufacturers, one distributer and one retailer via the combined option and back contracts. And one manufacturer provides the high wholesale price with low supply disruption risk and the other is completely the opposite. This differs from the previous supply chain coordination model. Firstly, supply disruption is added to the three-echelon supply chain. Secondly, considering the coordination of the supply chain, we deploy the combined option and back contracts which are seldom used in the previous study. Furthermore, it is interesting that supply disruption risk and buyback factor do not affect the distributor’s order quantity from the manufacturer who has low product price and unreliable operating ability, while the order quantity increases with the rise of option premium and option strike price. The distributor’s order quantity from the manufacturer, which has high product price and reliable operating ability, increases with the rise of supply disruption risk but decreases when the buyback factor, option premium, and option strike price decrease.

The New Electricity Market of Singapore: Regulatory framework, market power and competition

International Nuclear Information System (INIS)

Chang Youngho

2007-01-01

This study examines whether the New Electricity Market of Singapore (NEMS) is functioning at a workable level of competition. The generation market of the NEMS appears highly concentrated by a four-firm concentration ratio or the Herfindahl-Hirschman Index. However, other measures of market power present that the NEMS is working at close to a competitive market. First, there seems to be a number of effective competitors in the market. Second, Supply Margin Assessment and Residual Supply Index support that the market is competitive though there are some possibilities in which the largest generator or a few large generators jointly could still have market power. Third, the Lerner Index of the NEMS shows that the generation market is fairly competitive and the Lerner Index adjusted with an industry level price elasticity of demand implies that there has not been much exercise of market power. Finally, vesting contracts-a contractual obligation of a specified quantity of electricity supply to the market-have appeared to be a strong and effective tool to mitigate market power in the NEMS. The vesting contracts are considered the force behind the lowering in the average Uniform Singapore Electricity Price and the Lerner Index in 2004

Rigid Residue Scan Simulations Systematically Reveal Residue Entropic Roles in Protein Allostery.

Directory of Open Access Journals (Sweden)

Robert Kalescky

2016-04-01

Full Text Available Intra-protein information is transmitted over distances via allosteric processes. This ubiquitous protein process allows for protein function changes due to ligand binding events. Understanding protein allostery is essential to understanding protein functions. In this study, allostery in the second PDZ domain (PDZ2 in the human PTP1E protein is examined as model system to advance a recently developed rigid residue scan method combining with configurational entropy calculation and principal component analysis. The contributions from individual residues to whole-protein dynamics and allostery were systematically assessed via rigid body simulations of both unbound and ligand-bound states of the protein. The entropic contributions of individual residues to whole-protein dynamics were evaluated based on covariance-based correlation analysis of all simulations. The changes of overall protein entropy when individual residues being held rigid support that the rigidity/flexibility equilibrium in protein structure is governed by the La Châtelier's principle of chemical equilibrium. Key residues of PDZ2 allostery were identified with good agreement with NMR studies of the same protein bound to the same peptide. On the other hand, the change of entropic contribution from each residue upon perturbation revealed intrinsic differences among all the residues. The quasi-harmonic and principal component analyses of simulations without rigid residue perturbation showed a coherent allosteric mode from unbound and bound states, respectively. The projection of simulations with rigid residue perturbation onto coherent allosteric modes demonstrated the intrinsic shifting of ensemble distributions supporting the population-shift theory of protein allostery. Overall, the study presented here provides a robust and systematic approach to estimate the contribution of individual residue internal motion to overall protein dynamics and allostery.

Evaluation and Assessment of Fluoride in Drinking Water Wells Damavand Villages Zoning in GIS According to DMF Index

Directory of Open Access Journals (Sweden)

Kave Kheirkhah Rahimabad

2016-09-01

Full Text Available Background:Fluoride is one the vital anions and the drinking water is the main source of preparing it for the human body. Nonetheless, the aim of this paper is to investigate the Fluoride rate in water supplying wells by using GIS environment according to decay, missing or filled (DMF index.  Methods: This research is an analytic and cross-sectional descriptive study with sampling approach of 12 water supplying wells of Damavand villages in summer and autumn the year 2013. The Fluoride concentration was measured by standard method SPADNS using MN-Nano color 400 Photometer in laboratory of Rural Water and Wastewater Company of Tehran. Then DMF was investigated for local students and finally the obtained data were modeled in GIS. Results: The average of Fluoride concentration was 0.094 to 0.212 mg/L in summer and 0.137 to 3.48 mg/L in autumn. The DMF index was estimated around 5.46 for all evaluated students that the mentioned index was 7.635 and 3.29 for male and female pupils respectively which are statistically significant difference. Conclusion: The amounts of fluorine in drinking water supplies in rural Damavand villages are lower than the international water standards. According to the results of experiments and lack of fluorine ion in the villages of this town, required fluorine should be done by drinkable water fluoridation and continuities of implementation plan for fluoride ion among the schools until reaching the fluoride concentration to the standard threshold, Supplying required fluorine of body by mouth-wash materials for people of this region

Flanking signal and mature peptide residues influence signal peptide cleavage

Directory of Open Access Journals (Sweden)

Ranganathan Shoba

2008-12-01

Full Text Available Abstract Background Signal peptides (SPs mediate the targeting of secretory precursor proteins to the correct subcellular compartments in prokaryotes and eukaryotes. Identifying these transient peptides is crucial to the medical, food and beverage and biotechnology industries yet our understanding of these peptides remains limited. This paper examines the most common type of signal peptides cleavable by the endoprotease signal peptidase I (SPase I, and the residues flanking the cleavage sites of three groups of signal peptide sequences, namely (i eukaryotes (Euk (ii Gram-positive (Gram+ bacteria, and (iii Gram-negative (Gram- bacteria. Results In this study, 2352 secretory peptide sequences from a variety of organisms with amino-terminal SPs are extracted from the manually curated SPdb database for analysis based on physicochemical properties such as pI, aliphatic index, GRAVY score, hydrophobicity, net charge and position-specific residue preferences. Our findings show that the three groups share several similarities in general, but they display distinctive features upon examination in terms of their amino acid compositions and frequencies, and various physico-chemical properties. Thus, analysis or prediction of their sequences should be separated and treated as distinct groups. Conclusion We conclude that the peptide segment recognized by SPase I extends to the start of the mature protein to a limited extent, upon our survey of the amino acid residues surrounding the cleavage processing site. These flanking residues possibly influence the cleavage processing and contribute to non-canonical cleavage sites. Our findings are applicable in defining more accurate prediction tools for recognition and identification of cleavage site of SPs.

Influences of Organic Carbon Supply Rate on Uranium Bioreduction in Initially Oxidizing, Contaminated Sediment

Energy Technology Data Exchange (ETDEWEB)

Tokunaga, Tetsu K.; Wan, Jiamin; Kim, Yongman; Daly, Rebecca A.; Brodie, Eoin L.; Hazen, Terry C.; Herman, Don; Firestone, Mary K.

2008-06-10

Remediation of uranium (U) contaminated sediments through in-situ stimulation of bioreduction to insoluble UO{sub 2} is a potential treatment strategy under active investigation. Previously, we found that newly reduced U(IV) can be reoxidized under reducing conditions sustained by a continuous supply of organic carbon (OC) because of residual reactive Fe(III) and enhanced U(VI) solubility through complexation with carbonate generated through OC oxidation. That finding motivated this investigation directed at identifying a range of OC supply rates that is optimal for establishing U bioreduction and immobilization in initially oxidizing sediments. The effects of OC supply rate, from 0 to 580 mmol OC (kg sediment){sup -1} year{sup -1}, and OC form (lactate and acetate) on U bioreduction were tested in flow-through columns containing U-contaminated sediments. An intermediate supply rate on the order of 150 mmol OC (kg sediment){sup -1} year{sup -1} was determined to be most effective at immobilizing U. At lower OC supply rates, U bioreduction was not achieved, and U(VI) solubility was enhanced by complexation with carbonate (from OC oxidation). At the highest OC supply rate, resulting highly carbonate-enriched solutions also supported elevated levels of U(VI), even though strongly reducing conditions were established. Lactate and acetate were found to have very similar geochemical impacts on effluent U concentrations (and other measured chemical species), when compared at equivalent OC supply rates. While the catalysts of U(VI) reduction to U(IV) are presumably bacteria, the composition of the bacterial community, the Fe reducing community, and the sulfate reducing community had no direct relationship with effluent U concentrations. The OC supply rate has competing effects of driving reduction of U(VI) to low solubility U(IV) solids, as well as causing formation of highly soluble U(VI)-carbonato complexes. These offsetting influences will require careful control of OC

A new comprehensive index for discriminating adulteration in bovine raw milk.

Science.gov (United States)

Liu, Jing; Ren, Jing; Liu, Zhen-Min; Guo, Ben-Heng

2015-04-01

This paper proposes a new comprehensive index, called Q, which can effectively discriminate artificial adulterated milk from unadulterated milk. Both normal and adulterated samples of bovine raw milk were analysed by Fourier transform infrared spectroscopic instrument to measure the traditional indices of quality, including fat (FAT), protein (PRO), lactose (LAC), total solids (TS), non-fat solid (NFS), freezing point (FP) and somatic cell counts (SCC). From these traditional indices, this paper elaborates a method to build the index Q. First, correlated analysis and principle component analysis were used to select parameter pairs TS-FAT and FP-LAC as predominant variables. Second, linear-regression analysis and residual analysis are applied to determine the index Q and its discriminating ranges. The verification and two-blind trial results suggested that index Q could accurately detect milk adulteration with maltodextrin and water (as low as 1.0% of adulteration proportions), and with other nine kinds of synthetic adulterants (as low as 0.5% of adulteration proportions). Copyright © 2014 Elsevier Ltd. All rights reserved.

Recycling of air pollution control residues from municipal solid waste incineration into lightweight aggregates.

Science.gov (United States)

Quina, Margarida J; Bordado, João M; Quinta-Ferreira, Rosa M

2014-02-01

This work focuses on the assessment of technological properties and on the leaching behavior of lightweight aggregates (LWA) produced by incorporating different quantities of air pollution control (APC) residues from municipal solid waste (MSW) incineration. Currently this hazardous waste has been mostly landfilled after stabilization/solidification. The LWA were produced by pelletizing natural clay, APC residues as-received from incineration plant, or after a washing treatment, a small amount of oil and water. The pellets were fired in a laboratory chamber furnace over calcium carbonate. The main technological properties of the LWA were evaluated, mainly concerning morphology, bulk and particle densities, compressive strength, bloating index, water adsorption and porosity. Given that APC residues do not own expansive (bloating) properties, the incorporation into LWA is only possible in moderate quantities, such as 3% as received or 5% after pre-washing treatment. The leaching behavior of heavy metals from sintered LWA using water or acid solutions was investigated, and despite the low acid neutralization capacity of the synthetic aggregates, the released quantities were low over a wide pH range. In conclusion, after a washing pre-treatment and if the percentage of incorporation is low, these residues may be incorporated into LWA. However, the recycling of APC residues from MSW incineration into LWA does not revealed any technical advantage. Copyright © 2013 Elsevier Ltd. All rights reserved.

Supply Chain Management og Supply Chain costing

DEFF Research Database (Denmark)

Nielsen, Steen; Mortensen, Ole

2002-01-01

Formålet med denne artikel er at belyse de muligheder som ligger i at integrere virksomhedens økonomiske styring med begrebet Supply Chain Management (SCM). Dette søges belyst ved først at beskrive den teoretiske ramme, hvori SCM indgår. Herefter analyseres begrebet Supply Chain Costing (SCC) som...... Århus. Et resultat er, at via begrebet Supply Chain Costing skabes der mulighed for at måle logistikkædens aktiviteter i kr./øre. Anvendelsen af denne information har også strategisk betydning for at kunne vælge kunde og leverandør. Ved hjælp af integrationen skabes der også helt nye mulighed...

Optimal Allocation of Water Resources Based on Water Supply Security

Directory of Open Access Journals (Sweden)

Jianhua Wang

2016-06-01

Full Text Available Under the combined impacts of climate change and human activities, a series of water issues, such as water shortages, have arisen all over the world. According to current studies in Science and Nature, water security has become a frontier critical topic. Water supply security (WSS, which is the state of water resources and their capacity and their capacity to meet the demand of water users by water supply systems, is an important part of water security. Currently, WSS is affected by the amount of water resources, water supply projects, water quality and water management. Water shortages have also led to water supply insecurity. WSS is now evaluated based on the balance of the supply and demand under a single water resources condition without considering the dynamics of the varying conditions of water resources each year. This paper developed an optimal allocation model for water resources that can realize the optimal allocation of regional water resources and comprehensively evaluate WSS. The objective of this model is to minimize the duration of water shortages in the long term, as characterized by the Water Supply Security Index (WSSI, which is the assessment value of WSS, a larger WSSI value indicates better results. In addition, the simulation results of the model can determine the change process and dynamic evolution of the WSS. Quanzhou, a city in China with serious water shortage problems, was selected as a case study. The allocation results of the current year and target year of planning demonstrated that the level of regional comprehensive WSS was significantly influenced by the capacity of water supply projects and the conditions of the natural water resources. The varying conditions of the water resources allocation results in the same year demonstrated that the allocation results and WSSI were significantly affected by reductions in precipitation, decreases in the water yield coefficient, and changes in the underlying surface.

Reconstruction of steam generators super emergency feadwater supply system (SHNC) and steam dump stations to the atmosphere system PSA

International Nuclear Information System (INIS)

Kuzma, J.

2001-01-01

Steam Generators Super Emergency Feadwater Supply System (SHNC) and Steam Dump Stations to the Atmosphere System (PSA) are two systems which cooperate to remove residual heat from reactor core after seismic event. SHNC assure feeding of the secondary site of steam generator (Feed) where after heat removal.from primary loops, is relieved to the atmosphere by PSA (Bleed) in form of steam. (author)

Supply of wood fuel from small-scale woodlands for small-scale heating

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

This report summarises the findings of a study aimed at stimulating a market for wood fuels. A desk study of harvesting in existing small woodland was conducted, and thirteen case studies covering early broadleaved thinnings, mixed broadleaved coppice, and crownwood, scrub and residues were examined to obtain information on woodland types, wood fuel supply, and combustion equipment. Details are given of the measurement of moisture content of woodchips and stacked roundwood, wood volume and green density, harvesting options, crop and site variables, and production and costs of wood fuels. Usage of wood fuels, and the drying of small roundwood was considered. (UK)

A randomised controlled trial on the effect of mask choice on residual respiratory events with continuous positive airway pressure treatment.

Science.gov (United States)

Ebben, Matthew R; Narizhnaya, Mariya; Segal, Alan Z; Barone, Daniel; Krieger, Ana C

2014-06-01

It has been found that mask style can affect the amount of continuous positive airway pressure (CPAP) required to reduce an apnoea/hyponoea index (AHI) to mask style to another post titration could affect the residual AHI with CPAP. The purpose of this study was to investigate the differences in residual AHI with CPAP treatment between oronasal and nasal masks. Twenty-one subjects (age mean (M)=62.9, body mass index (BMI) M=29.6 kg/m2) were randomised (14 subjects completed the protocol) to undergo an in-laboratory CPAP titration with either a nasal mask or an oronasal mask. Subjects were then assigned this mask for 3weeks of at-home CPAP use with the optimal treatment pressure determined on the laboratory study (CPAP M=8.4 cm of H2O). At the end of this 3-week period, data were collected from the CPAP machine and the subject was given the other mask to use with the same CPAP settings for the next 3weeks at home (if the nasal mask was given initially, the oronasal one was given later and vice versa). On completion of the second 3-week period, data on residual AHI were again collected and compared with the first 3-week period on CPAP. A Wilcoxon Signed-Rank Test (two-tailed) revealed that residual AHI with CPAP treatment was significantly higher with the oronasal compared with the nasal mask (z = -3.296, pmask, and 50% of the subjects had a residual AHI >10/h in the oronasal mask condition, even though all of these subjects were titrated to an AHI of mask compared with a nasal mask. Switching to an oronasal mask post titration results in an increase in residual AHI with CPAP treatment, and pressure adjustment may be warranted. Copyright © 2014 Elsevier B.V. All rights reserved.

Phytotoxicity of vulpia residues: III. Biological activity of identified allelochemicals from Vulpia myuros.

Science.gov (United States)

An, M; Pratley, J E; Haig, T

2001-02-01

Twenty compounds identified in vulpia (Vulpia myuros) residues as allelochemicals were individually and collectively tested for biological activity. Each exhibited characteristic allelochemical behavior toward the test plant, i.e., inhibition at high concentrations and stimulation or no effect at low concentrations, but individual activities varied. Allelopathins present in large quantities, such as syringic, vanillic, and succinic acids, possessed low activity, while those present in small quantities, such as catechol and hydrocinnamic acid, possessed strong inhibitory activity. The concept of a phytotoxic strength index was developed for quantifying the biological properties of each individual allelopathin in a concise, comprehensive, and meaningful format. The individual contribution of each allelopathin, assessed by comparing the phytotoxic strength index to the overall toxicity of vulpia residues, was variable according to structure and was influenced by its relative proportion in the residue. The majority of compounds possessed low or medium biological activity and contributed most of the vulpia phytotoxicity, while compounds with high biological activity were in the minority and only present at low concentration. Artificial mixtures of these pure allelochemicals also produced phytotoxicity. There were additive/synergistic effects evident in the properties of these mixtures. One such mixture, formulated from allelochemicals found in the same proportions as occur in vulpia extract, produced stronger activity than another formulated from the same set of compounds but in equal proportions. These results suggest that the exploration of the relative composition of a cluster of allelopathins may be more important than simply focusing on the identification of one or two compounds with strong biological activity and that synergism is fundamental to the understanding of allelopathy.

Physicochemical and functional properties of dietary fiber from maca (Lepidium meyenii Walp.) liquor residue.

Science.gov (United States)

Chen, Jinjin; Zhao, Qingsheng; Wang, Liwei; Zha, Shenghua; Zhang, Lijun; Zhao, Bing

2015-11-05

Using maca (Lepidium meyenii) liquor residue as the raw material, dietary fiber (DF) was prepared by chemical (MCDF) and enzymatic (MEDF) methods, respectively, of which the physicochemical and functional properties were comparatively studied. High contents of DF were found in MCDF (55.63%) and MEDF (81.10%). Both fibers showed good functional properties, including swelling capacity, water holding capacity, oil holding capacity, glucose adsorption capacity and glucose retardation index. MEDF showed better functional properties, which could be attributed to its higher content of DF, more irregular surface and more abundant monosaccharide composition. The results herein suggest that maca DF prepared by enzymatic method from liquor residue is a good functional ingredient in food products. Copyright © 2015 Elsevier Ltd. All rights reserved.

Residual gas analysis

International Nuclear Information System (INIS)

Berecz, I.

1982-01-01

Determination of the residual gas composition in vacuum systems by a special mass spectrometric method was presented. The quadrupole mass spectrometer (QMS) and its application in thin film technology was discussed. Results, partial pressure versus time curves as well as the line spectra of the residual gases in case of the vaporization of a Ti-Pd-Au alloy were demonstrated together with the possible construction schemes of QMS residual gas analysers. (Sz.J.)

Assessing the Availability of Wood Residues and Residue Markets in Virginia

OpenAIRE

Alderman, Delton R. Jr.

1998-01-01

A statewide mail survey of primary and secondary wood product manufacturers was undertaken to quantify the production and consumption of wood residues in Virginia. Two hundred and sixty-six wood product manufacturers responded to the study and they provided information on the production, consumption, markets, income or disposal costs, and disposal methods of wood residues. Hardwood and pine sawmills produce approximately 66 percent of Virginia's wood residues. Virginia's wood product man...

The Use of Supply Chains and Supply Chain Management in the ...

African Journals Online (AJOL)

Dr Peter Schmitz

supply chain management to guide the production of maps. Supply chain management can ... Distribution and logistics. Product flow. Information flow and Money. The Firm. Data from supplier(s) ..... In Global Supply Chains: Developing Skills ...

Sublimation and transport of water from the north residual polar cap on Mars

Science.gov (United States)

Haberle, Robert M.; Jakosky, Bruce M.

1990-01-01

The possible role of the north residual cap in the current Martian water cycle was examined using models to assess the ability of the cap to supply water to the atmosphere and the ability of the atmospheric circulation to transport it out of the polar regions to low northern latitudes. Results indicate that rather extreme circumstances would be required for the cap to provide all of the observed increase in atmospheric water, such as a combination of high surface winds, low cap emissivities, or substantial evaporation from dark material. But even if these conditions could be met, the high-latitude circulation is too localized in scale to move much water vapor out of the polar environment. Both the present calculations and the data from the Viking's Mars Atmospheric Water Detection Experiment show that about two thirds of the water appearing in the Martian northern hemisphere during summer must be supplied by other sources. It is suggested that the additional source is water desorbing from the nonpolar regolith.

Energy supply. Energieversorgung

Energy Technology Data Exchange (ETDEWEB)

Eickhof, N.

1983-01-01

This anthology presents nine papers dealing with the following subjects: 1) international and national aspects of energy supply, 2) regional and local energy supply concepts, and 3) issues of district-heat supply. Each of the nine papers was entered separately.

Mutational properties of amino acid residues: implications for evolvability of phosphorylatable residues

DEFF Research Database (Denmark)

Creixell, Pau; Schoof, Erwin M.; Tan, Chris Soon Heng

2012-01-01

in terms of their mutational activity. Moreover, we highlight the importance of the genetic code and physico-chemical properties of the amino acid residues as likely causes of these inequalities and uncover serine as a mutational hot spot. Finally, we explore the consequences that these different......; it is typically assumed that all amino acid residues are equally likely to mutate or to result from a mutation. Here, by reconstructing ancestral sequences and computing mutational probabilities for all the amino acid residues, we refute this assumption and show extensive inequalities between different residues...... mutational properties have on phosphorylation site evolution, showing that a higher degree of evolvability exists for phosphorylated threonine and, to a lesser extent, serine in comparison with tyrosine residues. As exemplified by the suppression of serine's mutational activity in phosphorylation sites, our...

The performance of the Hydromorphological Index of Diversity (HMID) in a hydropower affected meandering river

Science.gov (United States)

Stähly, Severin; Bourqui, Pierre; Franca, Mario J.; Robinson, Christopher; Schleiss, Anton J.

2016-04-01

More than half of the Swiss electricity is produced by hydropower. Large price fluctuations cause severe hydropeaking flow regimes due to corresponding production fluctuations, which undisputedly have a negative impact on aquatic biota. Water diversion due to dams on the other hand imposes downstream residual flow regimes. The absence of flood events and regular sediment supply disrupts sediment dynamics and disconnects floodplains, which are habitats of high value, from its main channel. The residual-flow controlled reach at the Sarine river in western Switzerland is the subject of the present study. The Sarine meanders strongly and the river reach under analysis has a bed incision of locally more than 100 m. Its incision provokes the isolation of the river which is consequently minimally touched by human structures and shows a natural geomorphology. Since the construction of a dam upstream this reach in 1948, aiming at the water abstraction to hydropower, vegetation could establish and the active floodplain decreased its area, as airborne images show. Nevertheless, it is classified as a floodplain of national importance and it has been under protection since 1992. It is supposed to be a valuable habitat for a wide range of organisms. The Hydromorphological Index of Diversity (HMID) is a simple tool for quantifying the habitat richness in a river reach, taking into account the mean values and the variation of water depth and flow velocity. For channelized rivers, HMID values from up to 5 are expected, while morphological pristine sites with a high spatial variability of water depth and velocity show values of 9 or higher. For the residual flow of the Sarine River, flow depth and velocity were measured using ADCP and ADV. The results are compared with a nearby natural reference river and the outcome of a 2D numerical simulation. Finally, the behaviour and limitations of the HMID, in a hydropower affected river, are discussed. In the close future an artificial flood

INDEXING AND INDEX FUNDS

Directory of Open Access Journals (Sweden)

HAKAN SARITAŞ

2013-06-01

Full Text Available Proponents of the efficient market hypothesis believe that active portfolio management is largely wasted effort and unlikely to justify the expenses incurred. Therefore, they advocate a passive investment strategy that makes no attempt to outsmart the market. One common strategy for passive management is indexing where a fund is designed to replicate the performance of a broad-based index of stocks and bonds. Traditionally, indexing was used by institutional investors, but today, the use of index funds proliferated among individual investors. Over the years, both international and domestic index funds have disproportionately outperformed the market more than the actively managed funds have.

Selection of spatial scale for assessing impacts of groundwater-based water supply on freshwater resources

DEFF Research Database (Denmark)

Hybel, Anne-Marie; Godskesen, Berit; Rygaard, Martin

2015-01-01

used in this study: the Withdrawal-To-Availability ratio (WTA) and the Water Stress Index (WSI). Results were calculated for three groundwater based Danish urban water supplies (Esbjerg, Aarhus, and Copenhagen). The assessment was carried out at three spatial levels: (1) the groundwater body level, (2......) the river basin level, and (3) the regional level. The assessments showed that Copenhagen's water supply had the highest impact on the freshwater resource per cubic meter of water abstracted, with a WSI of 1.75 at Level 1. The WSI values were 1.64 for Aarhus's and 0.81 for Esbjerg's water supply. Spatial......Indicators of the impact on freshwater resources are becoming increasingly important in the evaluation of urban water systems. To reveal the importance of spatial resolution, we investigated how the choice of catchment scale influenced the freshwater impact assessment. Two different indicators were...

How to Achieve Supply Chain Sustainability Efficiently? Taming the Triple Bottom Line Split Business Cycle

Directory of Open Access Journals (Sweden)

Matthias Klumpp

2018-02-01

Full Text Available For sustainable supply chains, specific concepts regarding how to efficiently improve sustainability are needed in a global comprehensive triple bottom line (TBL approach, especially for forwarders as central actors in supply chain design. Such specific advice is provided by reporting empirical DEA Malmquist index findings from seven large European forwarders regarding a TBL sustainability analysis from 2006 to 2016. A major obstacle in improving sustainability consists in the newly discovered fact that with the business cycle, the three TBL areas of economic, ecologic and social objectives for logistics are undergoing different up- and down-ward trends, making it very hard to improve all three simultaneously. Additional factors are identified in the characteristics of size and government influence regarding the sustainability efficiency of forwarders. This has important impacts on supply chain design like e.g., with selection criteria.

Variations in the nerves of the thumb and index finger.

Science.gov (United States)

Wallace, W A; Coupland, R E

1975-11-01

The digital nerves to the thumb and index finger have been studied by dissecting twenty-five embalmed upper limbs. The palmar digital nerves to the thumb were constant in position and course, with a short lateral cutaneous branch from the radial palmar digital nerve in 30 per cent of cases. The palmar digital nerves to the index finger had a variable pattern, the commonest arrangement, well described in Gray's Anatomy, occurring in 74 per cent of cases. The variations and their frequency are described. By examining histological cross-sections of the index finger it was found that of about 5,000 endoneurial tubes entering the finger, 60 per cent passed beyond the distal digital crease to supply the pulp and nail bed. The depth of the palmar digital nerves was about 3 millimetres, but less at the digital creases, and their diameter lay between 1 and 1.5 millimetres as far as the distal digital crease. Clinical applications of the findings are discussed.

Architectures for Green-Field Supply Chain Integration: Supply Chain Integration Design

OpenAIRE

Radanliev, Petar

2015-01-01

This paper applied case study research to design architectures for green-field supply chain integration. The integration design is based on a case study of a supply chain integration of 5 companies, operating in different, but supply chain complimenting industry sectors. The case study research is applied to design and validate the architectures in a real world scenario. The supply\\ud chain integration architectures enable the conversion of individual into integrated strategies. The architect...

Pengukuran Kinerja Supply Chain Dengan Pendekatan Supply Chain Operation References (SCOR)

OpenAIRE

Rizki Wahyuniardi; Moh. Syarwani; Ryan Anggani

2017-01-01

PT. Brodo Ganesha Indonesia is a national company engaged in manufacturing with the production of leather shoes. The company has many stakeholders and it is difficult to manage its supply chain, thereby affecting the effectiveness and efficiency of the company's supply chains. The research was conducted to measure the performance of supply chain by using Supply Chain Operation References (SCOR) approach. The initial hierarchy model of performance measurement is tailored to the company's condi...

Supply chain integration and performance : the moderating effect of supply complexity

NARCIS (Netherlands)

Giménez, C.; van der Vaart, T.; van Donk, D.P.

2012-01-01

Purpose - The purpose of this paper is to investigate the effectiveness of supply chain integration in different contexts. More specifically, it aims to show that supply chain integration is only effective in buyer-supplier relationships characterised by high supply complexity.

[Correlation analysis between residual displacement and hip function after reconstruction of acetabular fractures].

Science.gov (United States)

Ma, Kunlong; Fang, Yue; Luan, Fujun; Tu, Chongqi; Yang, Tianfu

2012-03-01

To investigate the relationships between residual displacement of weight-bearing and non weight-bearing zones (gap displacement and step displacement) and hip function by analyzing the CT images after reconstruction of acetabular fractures. The CT measures and clinical outcome were retrospectively analyzed from 48 patients with displaced acetabular fracture between June 2004 and June 2009. All patients were treated by open reduction and internal fixation, and were followed up 24 to 72 months (mean, 36 months); all fractures healed after operation. The residual displacement involved the weight-bearing zone in 30 cases (weight-bearing group), and involved the non weight-bearing zone in 18 cases (non weight-bearing group). The clinical outcomes were evaluated by Merle d'Aubigné-Postel criteria, and the reduction of articular surface by CT images, including the maximums of two indexes (gap displacement and step displacement). All the data were analyzed in accordance with the Spearman rank correlation coefficient analysis. There was strong negative correlation between the hip function and the residual displacement values in weight-bearing group (r(s) = -0.722, P = 0.001). But there was no correlation between the hip function and the residual displacement values in non weight-bearing group (r(s) = 0.481, P = 0.059). The results of clinical follow-up were similar to the correlation analysis results. In weight-bearing group, the hip function had strong negative correlation with step displacement (r(s) = 0.825, P = 0.002), but it had no correlation with gap displacement (r(s) = 0.577, P = 0.134). In patients with acetabular fracture, the hip function has correlation not only with the extent of the residual displacement but also with the location of the residual displacement, so the residual displacement of weight-bearing zone is a key factor to affect the hip function. In patients with residual displacement in weight-bearing zone, the bigger the step displacement is, the

Evaluation of residue-residue contact prediction in CASP10

KAUST Repository

Monastyrskyy, Bohdan

2013-08-31

We present the results of the assessment of the intramolecular residue-residue contact predictions from 26 prediction groups participating in the 10th round of the CASP experiment. The most recently developed direct coupling analysis methods did not take part in the experiment likely because they require a very deep sequence alignment not available for any of the 114 CASP10 targets. The performance of contact prediction methods was evaluated with the measures used in previous CASPs (i.e., prediction accuracy and the difference between the distribution of the predicted contacts and that of all pairs of residues in the target protein), as well as new measures, such as the Matthews correlation coefficient, the area under the precision-recall curve and the ranks of the first correctly and incorrectly predicted contact. We also evaluated the ability to detect interdomain contacts and tested whether the difficulty of predicting contacts depends upon the protein length and the depth of the family sequence alignment. The analyses were carried out on the target domains for which structural homologs did not exist or were difficult to identify. The evaluation was performed for all types of contacts (short, medium, and long-range), with emphasis placed on long-range contacts, i.e. those involving residues separated by at least 24 residues along the sequence. The assessment suggests that the best CASP10 contact prediction methods perform at approximately the same level, and comparably to those participating in CASP9.

A combined pulmonary function and emphysema score prognostic index for staging in Chronic Obstructive Pulmonary Disease.

Directory of Open Access Journals (Sweden)

Afroditi K Boutou

Full Text Available Chronic Obstructive Pulmonary Disease (COPD is characterized by high morbidity and mortality. Lung computed tomography parameters, individually or as part of a composite index, may provide more prognostic information than pulmonary function tests alone.To investigate the prognostic value of emphysema score and pulmonary artery measurements compared with lung function parameters in COPD and construct a prognostic index using a contingent staging approach.Predictors of mortality were assessed in COPD outpatients whose lung computed tomography, spirometry, lung volumes and gas transfer data were collected prospectively in a clinical database. Univariate and multivariate Cox proportional hazard analysis models with bootstrap techniques were used.169 patients were included (59.8% male, 61.1 years old; Forced Expiratory Volume in 1 second % predicted: 40.5±19.2. 20.1% died; mean survival was 115.4 months. Age (HR = 1.098, 95% Cl = 1.04-1.252 and emphysema score (HR = 1.034, 95% CI = 1.007-1.07 were the only independent predictors of mortality. Pulmonary artery dimensions were not associated with survival. An emphysema score of 55% was chosen as the optimal threshold and 30% and 65% as suboptimals. Where emphysema score was between 30% and 65% (intermediate risk the optimal lung volume threshold, a functional residual capacity of 210% predicted, was applied. This contingent staging approach separated patients with an intermediate risk based on emphysema score alone into high risk (Functional Residual Capacity ≥210% predicted or low risk (Functional Residual Capacity <210% predicted. This approach was more discriminatory for survival (HR = 3.123; 95% CI = 1.094-10.412 than either individual component alone.Although to an extent limited by the small sample size, this preliminary study indicates that the composite Emphysema score-Functional Residual Capacity index might provide a better separation of high and low risk patients

Canopy reflectance indices and its relationship with yield in common bean plants (Phaseolus vulgaris L.) with phosphorus supply

International Nuclear Information System (INIS)

Rodriguez, M.G.; Escalante-Estrada, J.A.; Gonzalez, M.T.R.; Reynolds, M.P.

2006-01-01

Common bean plants (Phaseolus vulgaris L.) were grown under three phosphorous levels (0,100 & 200 kg ha-1) and under rain fed conditions with the objective to examine the association between vegetative indices (NDVI, normalized difference vegetation index; and GNDVI, green normalized difference vegetation index) and intercepted radiation, leaf area index, biomass and yield during the growing season. The maximum intercepted radiation, leaf area index (LAI) and biomass were reached during the pod filling stage {80 days after sowing (DAS)}, and the P treatment of 200 kg ha-1 showed the highest values. The high intercepted radiation was derived from an increase in LAI inducing a major biomass accumulation. Near to physiological maturity LAI decreased as a result of leaf abscission. NDVI and GNDVI were higher with P supply than without P at anthesis and pod filling stage (50 - 80 DAS). Near to physiological maturity, NDVI and GNDVI decreased in all the treatments . When the maximum intercepted radiation, LAI, and biomass production were reached during anthesis and pod filling stage, NDVI and GNDVI also had the highest values. The association between the vegetative indices and seed yield during the pod filling stage showed a linear relationship by the P supply. The relationship between GNDVI and seed yield was higher (r2 = 0.77) than the relationship between NDVI and seed yield (r2 = 0.61)

Proceedings of the 7. biennial residue-to-revenue residual wood conference 2007

International Nuclear Information System (INIS)

Raulin, J.

2007-01-01

This conference provided information on the highest and best use of residual wood, which is quickly becoming a valuable commodity. Issues concerning forest residues, sawmill wastes, agricultural residues and urban organic materials were discussed along with trends in Canadian surplus mill waste production. The evolving nature and technologies of the biomass business were highlighted with particular focus on how to generate energy and save money through the use of residual wood. Residual wood energy projects and developments in Canada, North America and Europe were outlined along with biomass development in relation to forest fires and insect disturbances. Cogeneration technologies using wood wastes for thermal heat, steam and electricity were also presented, along with transportation fuel technologies for the production of ethanol. It was noted that with the rising cost of energy, the forest industry is seeking energy solutions based on the use of residual wood. The range of economically practical residual wood solutions continues to grow as energy prices increase. The conference was attended by more than 200 delegates from the forest industry, suppliers and government representatives, to discuss policies and procedures currently in place. Industry investment is being stimulated by the potential for biofuels and biochemicals, as well as the co-operation between the forest and energy sectors. The conference featured 23 presentations, of which 12 have been catalogued separately for inclusion in this database. refs., tabs., figs

Pro biotic as Alternative to Antibiotic for Broiler Chicken fed Food Industrial Residual Oil

International Nuclear Information System (INIS)

EL-Faramawy, A.A.; El-Maghraby, A.F.; El-Danasoury, M.M.; Hussien, H.A.; Hegazy, E.S.

2016-01-01

This study aimed to evaluate the effect of pro biotic (some lactic acid bacteria) with different levels of food industrial residual oil in broiler commercial diets on growth performance, meat yield, internal organs, economical efficiency and performance index. One hundred and eighty one day old Cobb chicks (45 ± 0.4 g) were equally and randomly divided into 6 groups namely; the antibiotic with fresh oil (FO), the antibiotic with mixed oil (MO) [FO+RO ( 1:1 w/w)], the antibiotic with food industrial residual oil (RO), the pro biotic with FO, the pro biotic with MO and the pro biotic with RO. Virginiamycin, Phibro, USA (15 ppm), was the antibiotic, while a mixture of lactic acid bacteria is chosen as pro biotic. Both were added to the water. During the experiment which lasted for 42 days, the body weight, the feed intake and the mortality rate were recorded at 2, 4 and 6 weeks of age then the body weight gain, feed conversion ratio, economical efficiency and performance index were calculated. The results revealed that the average body weight, body weight gain and feed consumption significantly (P 0.05) while liver increased significantly (P<0.05) in pro biotic FO and gizzard in all pro biotic group and antibiotic MO. The highest performance index was observed in groups of birds treated with pro biotic with MO followed by birds treated with pro biotic FO without significant difference. It could be concluded that supplementation of pro biotic in broiler diet containing different levels of RO was economically more beneficial than antibiotic

A look at worldwide usage of residual wood for energy

International Nuclear Information System (INIS)

Ekstrom, H.; Hall, M.M.

2007-01-01

Wood Resources International was established in 1987, offering on-site evaluation services of forest resources and forest industry developments in over 20 countries worldwide. This presentation reviewed residual wood markets in North America and Europe. Wood chip trade and wood pellet markets were also reviewed. It is estimated that more than 50 per cent of the wood harvested worldwide is used for heating and cooking. Although sawmill wood residue has been typically used for particle board manufacturing, the energy sector in North America and Europe is now competing for low cost residuals, including sawdust, shavings and wood chips. With demand for renewable resources increasing, district heating plants have revived an interest in collecting the nearly 35 per cent of biomass left behind after traditional clear cutting. This biomass represents branches, tops and stumps left behind after the roundwood has been removed. In Canada, demand for mill residuals has grown and wood pellet manufacturers have the opportunity to invest in capacity while continuing to produce competitively priced pellets for the European market. It is anticipated that in the next decade, large volumes of beetle-killed wood are going to be available in British Columbia for energy consumption, including wood pellet production. Prices for sawdust have doubled over the past 3 years as a result of increased competition. The biomass supply potential in the United States is 7 times the current consumption. There is an increased interest in bioenergy in California due to the declining lumber sector. As such, the use of forest and agricultural waste is on the rise, along with prices for wood residues. There has also been a large increase in demand for wood biomass in Europe over the past 5 years, resulting in higher costs of all wood fiber sources used for energy. By 2020, Europe has set a target that all energy should come from renewable energy sources, with a minimum of 10 per cent being biofuel for

EFFECT OF SOIL TILLAGE AND PLANT RESIDUE ON SURFACE ROUGHNESS OF AN OXISOL UNDER SIMULATED RAIN

Directory of Open Access Journals (Sweden)

Elói Panachuki

2015-02-01

Full Text Available Surface roughness of the soil is formed by mechanical tillage and is also influenced by the kind and amount of plant residue, among other factors. Its persistence over time mainly depends on the fundamental characteristics of rain and soil type. However, few studies have been developed to evaluate these factors in Latossolos (Oxisols. In this study, we evaluated the effect of soil tillage and of amounts of plant residue on surface roughness of an Oxisol under simulated rain. Treatments consisted of the combination of the tillage systems of no-tillage (NT, conventional tillage (CT, and minimum tillage (MT with rates of plant residue of 0, 1, and 2 Mg ha-1 of oats (Avena strigosa Schreb and 0, 3, and 6 Mg ha-1 of maize (Zea mays L.. Seven simulated rains were applied on each experimental plot, with intensity of 60±2 mm h-1 and duration of 1 h at weekly intervals. The values of the random roughness index ranged from 2.94 to 17.71 mm in oats, and from 5.91 to 20.37 mm in maize, showing that CT and MT are effective in increasing soil surface roughness. It was seen that soil tillage operations carried out with the chisel plow and the leveling disk harrow are more effective in increasing soil roughness than those carried out with the heavy disk harrow and leveling disk harrow. The roughness index of the soil surface decreases exponentially with the increase in the rainfall volume applied under conditions of no tillage without soil cover, conventional tillage, and minimum tillage. The oat and maize crop residue present on the soil surface is effective in maintaining the roughness of the soil surface under no-tillage.

Supply Chain Finance in China: Business Innovation and Theory Development

Directory of Open Access Journals (Sweden)

Xiaohong Liu

2015-11-01

Full Text Available Supply chain finance (SCF is concerned with the capital flows within a supply chain, an area often neglected in past decades, while SCF does have an impact on a firm’s capability to adopt sustainable supply chain management (SCM practices. The aim of this study is to explore new insight from a growing body of research which is investigating SCF issues in China, an evolving transition economy. A content analysis on a review of 151 Chinese-written SCF papers from 2004–2014, based on a sample of 45 leading Chinese journals (Chinese Social Science Citation Index, CSSCI was conducted from three perspectives: topical coverage, theoretical application and methodological inquiry. The study reveals that the research stream of SCF in China has emerged and evolved to a considerable extent. However, the SCF phenomenon in China is not exactly the same as “SCF” as it is perceived in the mature economy, which is articulated in mainstream SCM English literature. The Chinese business context in which SCF has been implemented has played a dominant role in initiating, affecting and even shaping SCF. This study represents the first endeavor in the field of SCM. It diffuses the Chinese-written SCF research in mainstream SCM English literature.

Pengukuran Kinerja Supply Chain Dengan Pendekatan Supply Chain Operation References (SCOR

Directory of Open Access Journals (Sweden)

Rizki Wahyuniardi

2017-12-01

Full Text Available PT. Brodo Ganesha Indonesia is a national company engaged in manufacturing with the production of leather shoes. The company has many stakeholders and it is difficult to manage its supply chain, thereby affecting the effectiveness and efficiency of the company's supply chains. The research was conducted to measure the performance of supply chain by using Supply Chain Operation References (SCOR approach. The initial hierarchy model of performance measurement is tailored to the company's condition to measure its supply chain performance, while the normalization of Snorm De Boer serves to equalize the value of the matrix used as the measurement indicator. The level of importance of performance attributes is measured by weighting with subjective questionnaires. Value of performance attribute obtained reliability 19,74, responsiveness 16,91, agility 11,00; and asset management 12.26. The total performance score of 59.90. This value indicates that the performance of the supply chain is in an average position.

Incinerator performance: effects of changes in waste input and furnace operation on air emissions and residues

DEFF Research Database (Denmark)

Astrup, Thomas; Riber, Christian; Pedersen, Anne Juul

2011-01-01

Waste incineration can be considered a robust technology for energy recovery from mixed waste. Modern incinerators are generally able to maintain relatively stable performance, but changes in waste input and furnace operation may affect emissions. This study investigated how inorganic air emissions...... including ‘as-large-as-possible’ changes in furnace operation (oxygen levels, air supply and burnout level) only using normal MSW as input. The experiments showed that effects from the added waste materials were significant in relation to: air emissions (in particular As, Cd, Cr, Hg, Sb), element transfer...... coefficients, and residue composition (As, Cd, Cl, Cr, Cu, Hg, Mo, Ni, Pb, S, Sb, Zn). Changes in furnace operation could not be directly linked to changes in emissions and residues. The results outlined important elements in waste which should be addressed in relation to waste incinerator performance. Likely...

Solid residues

International Nuclear Information System (INIS)

Mulder, E.; Duin, P.J. van; Grootenboer, G.J.

1995-01-01

A summary is presented of the many investigations that have been done on solid residues of atmospheric fluid bed combustion (AFBC). These residues are bed ash, cyclone ash and bag filter ash. Physical and chemical properties are discussed and then the various uses of residues (in fillers, bricks, gravel, and for recovery of aluminium) are summarised. Toxicological properties of fly ash and stack ash are discussed as are risks of pneumoconiosis for workers handling fly ash, and contamination of water by ashes. On the basis of present information it is concluded that risks to public health from exposure to emissions of coal fly ash from AFBC appear small or negligible as are health risk to workers in the coal fly ash processing industry. 35 refs., 5 figs., 12 tabs

The specific transmission of Grapevine fanleaf virus by its nematode vector Xiphinema index is solely determined by the viral coat protein

International Nuclear Information System (INIS)

Andret-Link, Peggy; Schmitt-Keichinger, Corinne; Demangeat, Gerard; Komar, Veronique; Fuchs, Marc

2004-01-01

The viral determinants involved in the specific transmission of Grapevine fanleaf virus (GFLV) by its nematode vector Xiphinema index are located within the 513 C-terminal residues of the RNA2-encoded polyprotein, that is, the 9 C-terminal amino acids of the movement protein (2B MP ) and contiguous 504 amino acids of the coat protein (2C CP ) [Virology 291 (2001) 161]. To further delineate the viral determinants responsible for the specific spread, the four amino acids that are different within the 9 C-terminal 2B MP residues between GFLV and Arabis mosaic virus (ArMV), another nepovirus which is transmitted by Xiphinema diversicaudatum but not by X. index, were subjected to mutational analysis. Of the recombinant viruses derived from transcripts of GFLV RNA1 and RNA2 mutants that systemically infected herbaceous host plants, all with the 2C CP of GFLV were transmitted by X. index unlike none with the 2C CP of ArMV, regardless of the mutations within the 2B MP C-terminus. These results demonstrate that the coat protein is the sole viral determinant for the specific spread of GFLV by X. index

Effective food supply chains : generating, modelling and evaluating supply chain scenarios

NARCIS (Netherlands)

Vorst, van der J.G.A.J.

2000-01-01

Logistical co-ordination in FMCG supply chains

The overall objectives of the research described in this thesis were to obtain insight into the applicability of the concept Supply Chain Management (SCM) in food supply chains (SCs) from a logistical point of view, and to

Investigation of Pharmaceutical Residues in Hospital Effluents, in Ground- and Drinking Water from Bundeswehr Facilities, and their Removal During Drinking Water Purification (Arzneimittelrueckstaende in Trinkwasser(versorgungsanlagen) und Krankenhausabwaessern der Bundeswehr: Methodenentwicklung - Verkommen - Wasseraufbereitung)

National Research Council Canada - National Science Library

Heberer, Th; Feldmann, Dirk; Adam, Marc; Reddersen, Kirsten

1999-01-01

... by the German Ministry of Defense. The project had three defined objectives including the investigation of pharmaceutical residues in ground water wells used for drinking water supply at military facilities...

Manufacturing of concrete with residues from iron ore exploitation using the technology of radioactive waste cementation

Energy Technology Data Exchange (ETDEWEB)

Versieux, Juniara L.; Lameiras, Fernando S.; Tello, Cledola Cassia Oliveira de, E-mail: juniarani@gmail.com, E-mail: fsl@cdtn.br, E-mail: tellocc@cdtn.br [Centro de Desenvolvimento da Tecnologia Nucelar (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2015-07-01

Radioactive wastes from various segments of economy are immobilized by cementation, because of availability and widespread use in civil construction of cement. New cementitious materials are developed in CDTN using mining residues based on cementing techniques of radioactive wastes. Special procedures were developed to obtain concrete with the use of super plasticizers in which natural sand was totally replaced by mining residues. The motivation for this research is the exploration of banded iron formations (BIF) as iron ore in 'Quadrilatero Ferrifero' of Minas Gerais, where huge amounts of residues are generated with great concern about the environmental sustainability and safety of dams for residue storage. The exploitation of river sand causes many negative impacts, which leads to interest in its replacement by another raw material in mortar and concrete manufacturing. The use of BIF mining residues were studied for manufacturing of concrete pavers to contribute to reducing the impact caused by extraction of natural sand and use of mining residues. Previously developed procedures with total replacement of natural sand for mining residues were modified, including use of gravel to obtain pavers with improved properties. Four different mixtures were tested, in which the proportion of gravel and super plasticizer was varied. Monitored properties of pavers, among others, were compression resistance, water absorption, and void volume. With addition of gravel, the pavers had higher void index than those made only with mortar, and higher resistance to compression after 28 days of curing (an average of 18MPa of those made with mortar to 24MPa of those made with concrete). (author)

Manufacturing of concrete with residues from iron ore exploitation using the technology of radioactive waste cementation

International Nuclear Information System (INIS)

Versieux, Juniara L.; Lameiras, Fernando S.; Tello, Cledola Cassia Oliveira de

2015-01-01

Radioactive wastes from various segments of economy are immobilized by cementation, because of availability and widespread use in civil construction of cement. New cementitious materials are developed in CDTN using mining residues based on cementing techniques of radioactive wastes. Special procedures were developed to obtain concrete with the use of super plasticizers in which natural sand was totally replaced by mining residues. The motivation for this research is the exploration of banded iron formations (BIF) as iron ore in 'Quadrilatero Ferrifero' of Minas Gerais, where huge amounts of residues are generated with great concern about the environmental sustainability and safety of dams for residue storage. The exploitation of river sand causes many negative impacts, which leads to interest in its replacement by another raw material in mortar and concrete manufacturing. The use of BIF mining residues were studied for manufacturing of concrete pavers to contribute to reducing the impact caused by extraction of natural sand and use of mining residues. Previously developed procedures with total replacement of natural sand for mining residues were modified, including use of gravel to obtain pavers with improved properties. Four different mixtures were tested, in which the proportion of gravel and super plasticizer was varied. Monitored properties of pavers, among others, were compression resistance, water absorption, and void volume. With addition of gravel, the pavers had higher void index than those made only with mortar, and higher resistance to compression after 28 days of curing (an average of 18MPa of those made with mortar to 24MPa of those made with concrete). (author)

Contamination profile of aflatoxin M1 residues in milk supply chain of Sindh, Pakistan

Directory of Open Access Journals (Sweden)

Sana Jawaid

2015-01-01

Full Text Available Aflatoxin M1 (AFM1 is a potent carcinogen, teratogen and mutagen found in the milk when lactating animals consume feed contaminated with aflatoxin B1 (AFB1. In the present study, the contamination of AFM1 was evaluated in the milk supply chain of the province of Sindh, Pakistan. For the broader profiling of targeted toxin, enzyme-linked immunosorbent assay (ELISA was used for the determination of AFM1 in both branded and non-branded milk samples. The results showed that 96.43% of samples (81 out of 84 were contaminated with AFM1 in the range of 0.01–0.76 μg/L. The average contamination level was 0.38 μg/L. The determined values of AFM1 in the collected milk samples were above the standard limit of the European Commission while 70% of the samples exceeded levels established by United States regulations. According to these results, the estimated daily intake of AFM1 for adults was determined as 3.1 ng/kg of body weight per day.

North American natural gas supply dynamics: A focus on U.S. supply

International Nuclear Information System (INIS)

George, R.

1999-01-01

This paper discusses US natural gas supply dynamics in the context of the North American gas marketplace. Supply fundamentals are examined, methodology is briefly presented, regional supply outlooks are discussed. Assumptions, drivers and issues are highlighted. The analysis and outlook indicate that the sizeable North American resource base can be economically developed to supply growing US natural gas requirements. The major incremental supply sources are likely to come from deepwater Gulf of Mexico, Rocky Mountain regions, onshore Texas and imports from Canada. Given this outlook, major business and investment opportunities exist for the gas upstream and midstream sectors despite some short-term challenges

A Sustainable Closed-Loop Supply Chain Decision Mechanism in the Electronic Sector

Directory of Open Access Journals (Sweden)

Jiafu Su

2018-04-01

Full Text Available In a closed-loop supply chain for electronic products, the manufacturer’s priority is to enhance the residual value of the collected end-of-use product and decide whether to outsource this business to a retailer, a third-party service, or retain it exclusively. In this paper, we constructed three models to study the decision mechanism in a closed-loop supply chain, with different players selected to collect the used product. By comparing the three models, we characterized the conditions under which the manufacturer will benefit most, and we then aimed to determine the best choice for the manufacturer. Our findings show that, when the retailer and the third-party service provider provide equal performance in collecting the used product, the manufacturer will give priority to the third-party service provider if they choose to outsource this business. If the reverse flows managed by the retailer result in a higher payoff for the manufacturer, then the manufacturer will choose to outsource this business to the retailer who will also benefit.

Solar Energy Potential Estimation in Perak Using Clearness Index and Artificial Neural Network

Directory of Open Access Journals (Sweden)

Assadi Morteza Khalaji

2014-07-01

Full Text Available In this paper solar energy potential has been estimated by two methods which are clearness index and artificial network (ANN methods. The selected region is Seri Iskandar, Perak (4°24´latitude, 100°58´E longitude, 24 m altitude. Experimental data (monthly average daily radiation on horizontal surface was obtained from UTP solar research site in UTP campus. The data include the period of 2010 to 2012 and were used for testing the artificial neural network model and also for determination of clearness index. Also the experimental data of the three meteorological, Ipoh, Bayan Lepas & KLIA were used in calculating the clearness index and for training the neural network. Result shows that clearness index for Seri Iskandar is 0.52, the highest radiation is on February (20.45 MJ/m2/day, annual average is 18.25 MJ/m2/day and clearness index is more accurate than ANN when there is limited data supply. In general, Perak states show strong potential for solar energy application.

Supply-Chain Optimization Template

Science.gov (United States)

Quiett, William F.; Sealing, Scott L.

2009-01-01

The Supply-Chain Optimization Template (SCOT) is an instructional guide for identifying, evaluating, and optimizing (including re-engineering) aerospace- oriented supply chains. The SCOT was derived from the Supply Chain Council s Supply-Chain Operations Reference (SCC SCOR) Model, which is more generic and more oriented toward achieving a competitive advantage in business.

Improved NN-GM(1,1 for Postgraduates’ Employment Confidence Index Forecasting

Directory of Open Access Journals (Sweden)

Lu Wang

2014-01-01

Full Text Available Postgraduates’ employment confidence index (ECI forecasting can help the university to predict the future trend of postgraduates’ employment. However, the common forecast method based on the grey model (GM has unsatisfactory performance to a certain extent. In order to forecast postgraduates’ ECI efficiently, this paper discusses a novel hybrid forecast model using limited raw samples. Different from previous work, the residual modified GM(1,1 model is combined with the improved neural network (NN in this work. In particullar, the hybrid model reduces the residue of the standard GM(1,1 model as well as accelerating the convergence rate of the standard NN. After numerical studies, the illustrative results are provided to demonstrate the forecast performance of the proposed model. In addition, some strategies for improving the postgraduates’ employment confidence have been discussed.

Supply regimes in fisheries

DEFF Research Database (Denmark)

Nielsen, Max

2006-01-01

Supply in fisheries is traditionally known for its backward bending nature, owing to externalities in production. Such a supply regime, however, exist only for pure open access fisheries. Since most fisheries worldwide are neither pure open access, nor optimally managed, rather between the extremes......, the traditional understanding of supply regimes in fisheries needs modification. This paper identifies through a case study of the East Baltic cod fishery supply regimes in fisheries, taking alternative fisheries management schemes and mesh size limitations into account. An age-structured Beverton-Holt based bio......-economic supply model with mesh sizes is developed. It is found that in the presence of realistic management schemes, the supply curves are close to vertical in the relevant range. Also, the supply curve under open access with mesh size limitations is almost vertical in the relevant range, owing to constant...

Supply Chain Systems Architecture and Engineering Design: Green-field Supply Chain Integration

OpenAIRE

Radanliev, P

2015-01-01

This paper developed a new theory for supply chain architecture, and engineering design that enables integration of the business and supply chain strategies. The architecture starts with individual supply chain participants and derives insights into the complex and abstract concept of green-field integration design. The paper presented a conceptual system for depicting the interactions between business and supply chain strategy engineering. The system examines the decisions made when engineer...

Integrated supply chain risk management

OpenAIRE

Riaan Bredell; Jackie Walters

2007-01-01

Integrated supply chain risk management (ISCRM) has become indispensable to the theory and practice of supply chain management. The economic and political realities of the modern world require not only a different approach to supply chain management, but also bold steps to secure supply chain performance and sustainable wealth creation. Integrated supply chain risk management provides supply chain organisations with a level of insight into their supply chains yet to be achieved. If correctly ...

Macro-Logistics Decision Factors and Information Measures for Scanning Global (Supply Chain) Environments in International Location Choice

DEFF Research Database (Denmark)

Kinra, Aseem

2012-01-01

and strategic forecasting needs in relation to international risks. This may be done within the context of decision support systems that aid in global site location and other supply chain design problems. In contrast to solely utilizing widely-accepted environmental scanning indexes, managers may......value chains and supply chain management. This scope is usually accompanied by uncertainty to organisations, especially for the cross-border value chain with geographically dispersed operations and activities, and poses environmental complexity in the form of risks and costs that organisations need...... that pose constraints to international supply chain flows, and describe international uncertainty for firms. A catalogue of 187 information measures that aid in decisions on each relevant factor is also identified. The findings may be used by managers in different industry contexts for their scanning...

Development of methane conversion improvement method by recycling of residual methane for steam reforming as a part of R and D of HTGR-hydrogen production system

International Nuclear Information System (INIS)

Inagaki, Yoshiyuki; Haga, Katsuhiro; Aita, Hideki; Sekita, Kenji; Hino, Ryutaro; Koiso, Hiroshi.

1998-01-01

The purpose of the present study is to improve methane conversion for an HTGR-steam reforming system by recycling of residual methane. The residual methane in a product gas after steam reforming was recycled with a gas separator of polyimide membrane. Gas separation characteristics of the separator were investigated experimentally and numerically, and an experimental study on recycling system was carried out. The results showed that the recycling system improves apparent methane conversion, ratio of methane conversion to methane supply from a cylinder, from 20 to 32% compared with those without recycling. (author)

Handling of Solid Residues

International Nuclear Information System (INIS)

Medina Bermudez, Clara Ines

1999-01-01

The topic of solid residues is specifically of great interest and concern for the authorities, institutions and community that identify in them a true threat against the human health and the atmosphere in the related with the aesthetic deterioration of the urban centers and of the natural landscape; in the proliferation of vectorial transmitters of illnesses and the effect on the biodiversity. Inside the wide spectrum of topics that they keep relationship with the environmental protection, the inadequate handling of solid residues and residues dangerous squatter an important line in the definition of political and practical environmentally sustainable. The industrial development and the population's growth have originated a continuous increase in the production of solid residues; of equal it forms, their composition day after day is more heterogeneous. The base for the good handling includes the appropriate intervention of the different stages of an integral administration of residues, which include the separation in the source, the gathering, the handling, the use, treatment, final disposition and the institutional organization of the administration. The topic of the dangerous residues generates more expectation. These residues understand from those of pathogen type that are generated in the establishments of health that of hospital attention, until those of combustible, inflammable type, explosive, radio-active, volatile, corrosive, reagent or toxic, associated to numerous industrial processes, common in our countries in development

Geographic distribution of childhood diabetes and obesity relative to the supply of pediatric endocrinologists in the United States.

Science.gov (United States)

Lee, Joyce M; Davis, Matthew M; Menon, Ram K; Freed, Gary L

2008-03-01

To determine the geographic distribution of childhood diabetes and obesity relative to the supply of US pediatric endocrinologists. Estimation of observed and "index" ratios of children with diabetes (by region and division) and obesity (body mass index >/=95th % for age and sex) (by region and state) to board-certified pediatric endocrinologists. At the national level, the ratio of children with diabetes to pediatric endocrinologists is 290:1, and the ratio of obese children to pediatric endocrinologists is 17,741:1. Ratios of children with diabetes to pediatric endocrinologists in the Midwest (370:1), South (335:1), and West (367:1) are twice as high as in the Northeast (144:1). Across states, there is up to a 19-fold difference in the observed ratios of obese children to pediatric endocrinologists. Under conditions of equitably distributed endocrinologist supply, variation across states would be mitigated considerably. The distribution of children with diabetes and obesity does not parallel the distribution of pediatric endocrinologists in the United States, due largely to geographic disparities in endocrinologist supply. Given the large burden of obese children to endocrinologists, multidisciplinary models of care delivery are essential for the US health care system to address the needs of children with diabetes and obesity.

Oxygen supply in aquatic ectotherms: partial pressure and solubility together explain biodiversity and size patterns.

Science.gov (United States)

Verberk, Wilco C E P; Bilton, David T; Calosi, Piero; Spicer, John I

2011-08-01

Aquatic ectotherms face the continuous challenge of capturing sufficient oxygen from their environment as the diffusion rate of oxygen in water is 3 x 10(5) times lower than in air. Despite the recognized importance of oxygen in shaping aquatic communities, consensus on what drives environmental oxygen availability is lacking. Physiologists emphasize oxygen partial pressure, while ecologists emphasize oxygen solubility, traditionally expressing oxygen in terms of concentrations. To resolve the question of whether partial pressure or solubility limits oxygen supply in nature, we return to first principles and derive an index of oxygen supply from Fick's classic first law of diffusion. This oxygen supply index (OSI) incorporates both partial pressure and solubility. Our OSI successfully explains published patterns in body size and species across environmental clines linked to differences in oxygen partial pressure (altitude, organic pollution) or oxygen solubility (temperature and salinity). Moreover, the OSI was more accurately and consistently related to these ecological patterns than other measures of oxygen (oxygen saturation, dissolved oxygen concentration, biochemical oxygen demand concentrations) and similarly outperformed temperature and altitude, which covaried with these environmental clines. Intriguingly, by incorporating gas diffusion rates, it becomes clear that actually more oxygen is available to an organism in warmer habitats where lower oxygen concentrations would suggest the reverse. Under our model, the observed reductions in aerobic performance in warmer habitats do not arise from lower oxygen concentrations, but instead through organismal oxygen demand exceeding supply. This reappraisal of how organismal thermal physiology and oxygen demands together shape aerobic performance in aquatic ectotherms and the new insight of how these components change with temperature have broad implications for predicting the responses of aquatic communities to

The development of market power in the Spanish power generation sector: Perspectives after market liberalization

International Nuclear Information System (INIS)

Ciarreta, Aitor; Nasirov, Shahriyar; Silva, Carlos

2016-01-01

This paper provides a comprehensive analysis of the market power problem in the Spanish power generation sector and examines how and to which extent the market has developed in terms of market power concerns after the market liberalization reforms. The methodology applied in this study includes typical ex-post structural and behavioral measures employed to estimate potential for market power, namely: concentration ratios (CR) (for the largest and the three largest suppliers), the Herfindahl–Hirschman Index (HHI), Entropy, Pivotal Supply Index, the Residual Supply Index and Residual Demand Elasticity (RDE). The results are presented for the two largest Spanish generating companies (Endesa and Iberdrola) acting in the Iberian Electricity Market (MIBEL), and in the Spanish Day-ahead electricity market. The results show evidence that these companies have behaved much more competitively in recent periods than in the beginning of the market liberalization. In addition, the paper discusses important structural and regulatory changes through market liberalization processes in the Spanish Day-ahead electricity market. - Highlights: •Competition and regulation in the Spanish electricity market. •The methodology applied in this study: ex-post structural and behavioral measures. •Key dominant companies behaved more competitively in recent periods. •Important structural and regulatory changes in the Spanish electricity market.

An innovational application of digital power supply controller on SSRF dynamic power supply

International Nuclear Information System (INIS)

Chen Huanguang; Li Rui; Guo Chunlong; Shen Tianjian; Li Deming

2008-01-01

Control structure of dynamic power supply using PSI controller in SLS and Diamond is introduced. For designing dynamic power supply using PSI controller in the booster of SSRF, an innovative application of PSI digital power supply controller has been developed. In the commissioning of SSRF, the dynamic power supplies performed perfectly. (authors)

Supply chain reliability modelling

Directory of Open Access Journals (Sweden)

Eugen Zaitsev

2012-03-01

Full Text Available Background: Today it is virtually impossible to operate alone on the international level in the logistics business. This promotes the establishment and development of new integrated business entities - logistic operators. However, such cooperation within a supply chain creates also many problems related to the supply chain reliability as well as the optimization of the supplies planning. The aim of this paper was to develop and formulate the mathematical model and algorithms to find the optimum plan of supplies by using economic criterion and the model for the probability evaluating of non-failure operation of supply chain. Methods: The mathematical model and algorithms to find the optimum plan of supplies were developed and formulated by using economic criterion and the model for the probability evaluating of non-failure operation of supply chain. Results and conclusions: The problem of ensuring failure-free performance of goods supply channel analyzed in the paper is characteristic of distributed network systems that make active use of business process outsourcing technologies. The complex planning problem occurring in such systems that requires taking into account the consumer's requirements for failure-free performance in terms of supply volumes and correctness can be reduced to a relatively simple linear programming problem through logical analysis of the structures. The sequence of the operations, which should be taken into account during the process of the supply planning with the supplier's functional reliability, was presented.

Defining regulatory requirements for water supply systems in Vietnam

Directory of Open Access Journals (Sweden)

Deryushev Leonid Georgiyevich

2014-01-01

Full Text Available In the article the authors offer their suggestions for improving the reliability of the standardization requirements for water supply facilities in Vietnam, as an analog of building regulations of Russia 31.13330.2012. In Russia and other advanced countries the reliability of the designed water supply systems is usual to assess quantitatively. Guidelines on the reliability assessment of water supply systems and facilities have been offered by many researchers, but these proposals are not officially approved. Some methods for assessing the reliability of water supply facilities are informally used in practice when describing their quality. These evaluation methods are simple and useful. However, the given estimations defy common sense and regulatory requirements used by all the organizations, ministries and departments, for example, of Russia, in the process of allowances for restoration and repair of water supply facilities. Inadequacy of the water supply facilities assessment is shown on the example of assessing the reliability of pipeline system. If we take MTBF of specific length of the pipeline as reliability index for a pipeline system, for example, 5 km, a pipeline of the similar gauge, material and working conditions with the length of 5 m, according to the estimation on the basis of non-official approach, must have a value of MTBF 1000 times greater than with the length of 5 km. This conclusion runs counter to common sense, for the reason that all the pipes in the area of 5 km are identical, have the same load and rate of wear (corrosion, fouling, deformation, etc.. It was theoretically and practically proved that products of the same type in the same operating conditions (excluding determined impact of a person, work as an entity, which MTBF is equal to the average lifetime. It is proposed to take the average service life as a reliability indicator of a pipeline. Durability, but not failsafety of the pipe guarantees pipeline functioning

The New Electricity Market of Singapore : regulatory framework, market power and competition

International Nuclear Information System (INIS)

Chang, Y.

2007-01-01

This study examines whether the New Electricity Market of Singapore (NEMS) is functioning at a workable level of competition. The generation market of the NEMS appears highly concentrated by a four-firm concentration ratio or the Herfindahl-Hirschman Index. However, other measures of market power present that the NEMS is working at close to a competitive market. First, there seems to be a number of effective competitors in the market. Second, Supply Margin Assessment and Residual Supply Index support that the market is competitive though there are some possibilities in which the largest generator or a few large generators jointly could still have market power. Third, the Lerner Index of the NEMS shows that the generation market is fairly competitive and the Lerner Index adjusted with an industry level price elasticity of demand implies that there has not been much exercise of market power. Finally, vesting contracts - a contractual obligation of a specified quantity of electricity supply to the market - have appeared to be a strong and effective tool to mitigate market power in the NEMS. The vesting contracts are considered the force behind the lowering in the average Uniform Singapore Electricity Price and the Lerner Index in 2004. [Author

Canadian oil sands : supply and potential for market growth

International Nuclear Information System (INIS)

Crandall, G.

2004-01-01

Canadian oil sands recoverable reserves rank second only to Saudi Arabia and present enormous potential, particularly through technological gains. This paper discussed the market potential for oil sands both globally and in North America. It was estimated that oil sands production would eventually surpass declining conventional production, increasing from 42 per cent of Western supply in 2002 to 78 per cent in 2015. Recoverable reserves were an estimated 174 billion barrels, with cumulative production at 4 billion barrels between 1967 to 2003. Statistics of U.S. and Canadian markets for crude oil were presented to the year 2020. A flow chart of oil sands products and market outlets was presented, as well as details of existing and potential markets for Canadian crude oil. Oil sands product dispositions were outlined, with the prediction that Asia may emerge as an incremental market. World crude oil production statistics were presented by type. World residual supply and demand estimates were presented, including details of conversion capacity and requirements for residual processing capacity in refineries and field upgraders. American refinery feedstocks were presented by type, with the identification of an increase in heavy crude runs. It was noted that recent pricing provided a strong incentive to add refining conversion capacity to process heavy oil. An outline of a study completed for the Alberta government and industry was presented, in which upgrading to light synthetic crude was determined as a base case. The value added to process bitumen beyond upgrading was discussed in relation to the upgrading of American refineries to process bitumen blends and synthetic crude. Potential cases for upgrading bitumen were presented, along with a comparison of capital costs. An overall economic comparison of projects was provided. Various measures to maximize markets for oil sands products in Alberta were presented. It was suggested that U.S. markets should absorb more new

Novel Approach for Enhanced Scandium and Titanium Leaching Efficiency from Bauxite Residue with Suppressed Silica Gel Formation.

Science.gov (United States)

Alkan, Gözde; Yagmurlu, Bengi; Cakmakoglu, Seckin; Hertel, Tobias; Kaya, Şerif; Gronen, Lars; Stopic, Srecko; Friedrich, Bernd

2018-04-04

The need of light weight alloys for future transportation industry puts Sc and Ti under a sudden demand. While these metals can bring unique and desired properties to alloys, lack of reliable sources brought forth a supply problem which can be solved by valorization of the secondary resources. Bauxite residue (red mud), with considerable Ti and Sc content, is a promising resource for secure supply of these metals. Due to drawbacks of the direct leaching route from bauxite residue, such as silica gel formation and low selectivity towards these valuable metals, a novel leaching process based on oxidative leaching conditions, aiming more efficient and selective leaching but also considering environmental aspects via lower acid consumption, was investigated in this study. Combination of hydrogen peroxide (H 2 O 2 ) and sulfuric acid (H 2 SO 4 ) was utilized as the leaching solution, where various acid concentrations, solid-to-liquid ratios, leaching temperatures and times were examined in a comparative manner. Leaching with 2.5 M H 2 O 2 : 2.5 M H 2 SO 4 mixture at 90 °C for 30 min was observed to be the best leaching conditions with suppressed silica gel formation and the highest reported leaching efficiency with high S/L ratio for Sc and Ti; 68% and 91%; respectively.

Heavy oil supply economics and supply response to low oil prices

International Nuclear Information System (INIS)

Fisher, L.

1999-01-01

The dynamics of the heavy oil industry are examined, including prices, market demand, supply and supply costs. Price assumptions are provided for the reference case oil price (west Texas intermediate at Cushing). Supply cost methodology is explained. Capital and operating costs for various heavy oil and synthetic sources are derived from modeling results. The range of supply costs for heavy oil and bitumen from various sources, supply costs in terms of reference case market values and in terms of 1995-1996 average market values for Bow River crude, are derived. The CERI long term supply forecast model is explained. Western Canada upstream oil and gas cash flow and capital expenditures, eastern Canada exploration and expenditures by hydrocarbon type, and Canadian heavy oil and bitumen production based on reference case prices are estimated. Based on these projections the outlook for heavy oil at reference case prices for better than average quality resources is judged to be economic. Lower quality resources will require technology gains for successful commercialization. SAGD is a likely candidate in this respect. Again based on reference prices, production is forecast to decline by 100 Kb/d over the next five years. Diluent supply is considered to be adequate throughout the forecast period. As far as thermal bitumen is concerned, the growth could, in fact, exceed the projection, but if so, more upgrading will be required. 11 figs

Effects of body mass index on the outcomes of percutaneous nephrolithotomy

Directory of Open Access Journals (Sweden)

Cemal Selcuk Isoglu

Full Text Available ABSTRACT Objective To examine the the effect of body mass index (BMI on PNL results and complications with a large number of patients. Materials and Methods A total of 958 patients were included in the study, who underwent percutaneous nephrolithotomy in our clinic between 2008 and 2015. Patients were divided into 2 groups according to their body mass index. Patients with a BMI < 30 kg/m2 were classified as group 1 (n:676 and patients with a BMI ≥ 30 kg/m2 were classified as group 2 (n:282. Achieving stone-free status or having residual stones of ≤ 4 mm were considered as operational success. Results The mean age was 47.9 years for group 1 and 48.9 years for group 2 patients. At postoperative first month CT analysis, residual stone was not observed in 466 patients (69% of group 1 and 20 (72% patients of group 2. There was no significant difference between the groups in terms of stone-free status (p=0.348. There was no significant difference between two groups complications. Also, there was no difference between the groups for requiring additional intervention (p=0.924. No other complications were observed in the patients. Conclusions BMI does not affect the outcomes of percutaneous nephrolithotomy as well as complication rate.

AC power supply systems

International Nuclear Information System (INIS)

Law, H.

1987-01-01

An ac power supply system includes a rectifier fed by a normal ac supply, and an inverter connected to the rectifier by a dc link, the inverter being effective to invert the dc output of the receiver at a required frequency to provide an ac output. A dc backup power supply of lower voltage than the normal dc output of the rectifier is connected across the dc link such that the ac output of the rectifier is derived from the backup supply if the voltage of the output of the inverter falls below that of the backup supply. The dc backup power may be derived from a backup ac supply. Use in pumping coolant in nuclear reactor is envisaged. (author)

Environment-friendly heat supply with natural refrigerants. Large heat pumps use industrial waste heat and waste water; Umweltschonende Waermeversorgung mit natuerlichen Kaeltemitteln. Grosswaermepumpen nutzen industrielle Abwaerme und Abwaesser

Energy Technology Data Exchange (ETDEWEB)

Anon.

2011-01-15

Everywhere, where industrial processes occur or coldness is produced, simultaneously heat is produced. While many private houses use geothermal energy or ambient air for the production of heat, waste water and waste heat prove to be optimal energy sources for the industrial need due to higher output temperatures. By means of large heat pumps the residual heat is used for heating or the supply of hot water for example in local heat supply grids and makes an important contribution to climate protection.

Comparison of series regulated neutral beam accel supplies with shunt regulated accel supplies

International Nuclear Information System (INIS)

Baker, W.; Smith, B.H.

1976-01-01

This study was undertaken to get a direct comparison between comparable series and shunt regulated power supplies. It is intended that the two supplies will be strictly equivalent with the same safety factors in the design of each type and the cost estimates made on the same basis. The series regulated power supply is simply a scaled up version of the 2XIIB Accel Supplies. Each supply provides 150 kV, 65 ampere, 500 ms pulse output such as will be used on the TFTR sources. The shunt regulated power supply uses high reactance transformers to provide the series impedance for the shunt regulator. The most significant difference in the performance of the two types of power supplies is that the shunt regulated supply has a minimum interrupt period of 16 ms, whereas the series regulated supply can have about 0.5 ms. Even this difference can be eliminated with a commutator circuit such as is being developed in Berkeley for the 150 kV, 20 ampere system. The 16 ms period is probably not a very serious limitation because it still permits up to 31 interrupts per 500 ms pulse. The shunt regulated system appears to be about 37 percent less expensive than the series system

Rapid surface enhanced Raman scattering detection method for chloramphenicol residues

Science.gov (United States)

Ji, Wei; Yao, Weirong

2015-06-01

Chloramphenicol (CAP) is a widely used amide alcohol antibiotics, which has been banned from using in food producing animals in many countries. In this study, surface enhanced Raman scattering (SERS) coupled with gold colloidal nanoparticles was used for the rapid analysis of CAP. Density functional theory (DFT) calculations were conducted with Gaussian 03 at the B3LYP level using the 3-21G(d) and 6-31G(d) basis sets to analyze the assignment of vibrations. Affirmatively, the theoretical Raman spectrum of CAP was in complete agreement with the experimental spectrum. They both exhibited three strong peaks characteristic of CAP at 1104 cm-1, 1344 cm-1, 1596 cm-1, which were used for rapid qualitative analysis of CAP residues in food samples. The use of SERS as a method for the measurements of CAP was explored by comparing use of different solvents, gold colloidal nanoparticles concentration and absorption time. The method of the detection limit was determined as 0.1 μg/mL using optimum conditions. The Raman peak at 1344 cm-1 was used as the index for quantitative analysis of CAP in food samples, with a linear correlation of R2 = 0.9802. Quantitative analysis of CAP residues in foods revealed that the SERS technique with gold colloidal nanoparticles was sensitive and of a good stability and linear correlation, and suited for rapid analysis of CAP residue in a variety of food samples.

Treatment of waste incinerator air-pollution-control residues with FeSO4: Laboratory investigation of design parameters

DEFF Research Database (Denmark)

Jensen, Dorthe Lærke; Christensen, Thomas Højlund; Lundtorp, Kasper

2002-01-01

supplied, the liquid-to-solid ratio of the process, the separation of solids and wastewater, the sequence of material mixing, the possibilities of reuse of water, the feasibility of using secondary (brackish) water, and simple means to improve the wastewater quality. The investigation showed...... that an optimum process configuration could be obtained yielding a stabilised solid product with low leaching of heavy metals and a dischargable wastewater with high contents of salts (in order to remove salts from the solid product) and low concentrations of heavy metals. The amount of iron added to the APC......The key design parameters of a new process for treatment of air-pollution-control (APC) residues (the Ferroxprocess) were investigated in the laboratory. The optimisation involved two different APC-residues from actual incinerator plants. The design parameters considered were: amount of iron oxide...

Optimal inventory policies with non-stationary supply disruptions and advance supply information

NARCIS (Netherlands)

Atasoy, B.; Güllü, R.; Tan, T.

2012-01-01

We consider the production/inventory problem of a manufacturer (or a retailer) under non-stationary and stochastic supply availability. Although supply availability is uncertain, the supplier would be able to predict her near future shortages – and hence supply disruption to (some of) her customers

Optimal inventory policies with non-stationary supply disruptions and advance supply information

NARCIS (Netherlands)

Atasoy, B.; Güllü, R.; Tan, T.

2011-01-01

We consider the production/inventory problem of a manufacturer (or a retailer) under non-stationary and stochastic supply availability. Although supply availability is uncertain, the supplier would be able to predict her near future shortages -and hence supply disruption to (some of) her customers-

Wobbe index control system in gas industry processes; Systeme de controle de l'index de Wobbe du gaz naturel dans les processus industriels

Energy Technology Data Exchange (ETDEWEB)

Cassibba, M.; Bertani, M. [SNAM, (Italy)

2000-07-01

Natural gas supplied to industry for process utilizations originates from different sources and that can cause fluctuations in gas composition. Changing gas composition may lead to production problems in industry with sensitive thermal processes (particularly glass industry and thermal metal treatments), such as efficiency and product quality. An equipment suitable to control and adjust such variations has been developed. Experimental tests in laboratory were carried out in order to investigate the control system accuracy and reliability. In particular five different settings were tested: at a preset thermal input by adjusting the natural gas flow rate in respect to Wobbe Index variations; at a set furnace temperature and stack oxygen level with variable thermal input by monitoring the Wobbe Index value; at constant Wobbe Index value by adding air to natural gas; at constant thermal input and prefixed Wobbe Index value by adding air to natural gas and varying the air and gas mixture flow rate; gross calorific value control by adding air or LPG to natural gas. All the tested settings gave good results. This report illustrates these results and the main features of the control system. The control and regulation system was installed in two glass factories for field tests. (authors)

Integrated supply chain risk management

Directory of Open Access Journals (Sweden)

Riaan Bredell

2007-11-01

Full Text Available Integrated supply chain risk management (ISCRM has become indispensable to the theory and practice of supply chain management. The economic and political realities of the modern world require not only a different approach to supply chain management, but also bold steps to secure supply chain performance and sustainable wealth creation. Integrated supply chain risk management provides supply chain organisations with a level of insight into their supply chains yet to be achieved. If correctly applied, this process may optimise management decision-making and assist in the protection and enhancement of shareholder value.

Ending appreciable tobacco use in a nation: using a sinking lid on supply.

Science.gov (United States)

Thomson, George; Wilson, Nick; Blakely, Tony; Edwards, Richard

2010-10-01

We discuss some of the practical and ethical questions that may arise for a jurisdiction where a sinking lid endgame strategy for tobacco supply is implemented. Such a strategy would involve regular required reductions in the amount of tobacco released to the market for sale, sufficient to achieve the desired level of commercial sales by a target date. Tobacco manufacturers would periodically bid to the government for a residual quota. Prices would increase as supply reduced. The price level would be influenced by demand, which in turn would reflect the impact of other interventions to reduce demand and the changing normality of smoking. Higher priced tobacco could result in increased smuggling, theft, illegal sales and short-to-medium-term aggravation of some social inequalities. We suggest that the strategy be introduced in conjunction with a range of complementary interventions that would help reduce demand, and thus help ensure that the possible adverse effects are minimised. These complementary interventions include: providing comprehensive best practice smoking cessation support, better information to smokers and the public, strengthened regulation of tobacco retailing and supply, further controlling the pack and product design, measures to restrict supplies that bypass the increases in product price, strengthened enforcement and combating industry attacks. General prerequisites for a sinking lid strategy include public support for the goal of a tobacco-free society, and strong political leadership. The likely context for initial success in jurisdictions includes geographical isolation and/or strong border controls, absence of significant tobacco production and/or manufacturing and low government corruption.

Evaluation and Assessment of Fluoride in Drinking Water Wells Damavand Villages Zoning in GIS According to DMF Index

OpenAIRE

Kave Kheirkhah Rahimabad; Amir Hessam Hasani; Reza Saeedi; Mir Masoud Kheirkhah Zarkesh; Mojtaba Sayadi

2016-01-01

Background:Fluoride is one the vital anions and the drinking water is the main source of preparing it for the human body. Nonetheless, the aim of this paper is to investigate the Fluoride rate in water supplying wells by using GIS environment according to decay, missing or filled (DMF) index.  Methods: This research is an analytic and cross-sectional descriptive study with sampling approach of 12 water supplying wells of Damavand villages in summer and autumn the year 2013. The Fluor...

Relevance of water quality index for groundwater quality evaluation: Thoothukudi District, Tamil Nadu, India

Science.gov (United States)

Singaraja, C.

2017-09-01

The present hydrogeochemical study was confined to the Thoothukudi District in Tamilnadu, India. A total of 100 representative water samples were collected during pre-monsoon and post-monsoon and analyzed for the major cations (sodium, calcium, magnesium and potassium) and anions (chloride, sulfate, bicarbonate, fluoride and nitrate) along with various physical and chemical parameters (pH, total dissolved salts and electrical conductivity). Water quality index rating was calculated to quantify the overall water quality for human consumption. The PRM samples exhibit poor quality in greater percentage when compared with POM due to dilution of ions and agricultural impact. The overlay of WQI with chloride and EC corresponds to the same locations indicating the poor quality of groundwater in the study area. Sodium (Na %), sodium absorption ratio (SAR), residual sodium carbonate (RSC), residual sodium bicarbonate, permeability index (PI), magnesium hazards (MH), Kelly's ratio (KR), potential salinity (PS) and Puri's salt index (PSI) and domestic quality parameters such as total hardness (TH), temporary, permanent hardness and corrosivity ratio (CR) were calculated. The majority of the samples were not suitable for drinking, irrigation and domestic purposes in the study area. In this study, the analysis of salinization/freshening processes was carried out through binary diagrams such as of mole ratios of {SO}_{ 4}^{ 2- } /Cl- and Cl-/EC that clearly classify the sources of seawater intrusion and saltpan contamination. Spatial diagram BEX was used to find whether the aquifer was in the salinization region or in the freshening encroachment region.

Public-supply water use and self-supplied industrial water use in Tennessee, 2010

Science.gov (United States)

Robinson, John A.

2018-04-26

The U.S. Geological Survey (USGS), in cooperation with the Tennessee Department of Environment and Conservation, Division of Water Resources, prepared this report and displayed and analyzed water use by self-supplied industrial and public-supply water systems in Tennessee for 2010. Public-supply water systems in Tennessee provide water for domestic, industrial, and commercial uses and for municipal services. In 2010, 474 public-supply water systems distributed 917 million gallons per day (Mgal/d) of surface water (67 percent, 617 Mgal/d) and groundwater (33 percent, 300 Mgal/d) to a population of 5.7 million in Tennessee. Gross per capita water use in Tennessee during 2010 was 162 gallons per day.Since 1950, water withdrawals by public-supply water systems in Tennessee have increased from 160 Mgal/d to 917 Mgal/d in 2010. Each of the 95 counties in Tennessee was served by at least 1 public-supply water system in 2010. Tennessee public-supply water systems withdraw less groundwater than surface water, and surface-water use has increased at a faster rate than groundwater use. Since 2005, surface-water withdrawals have increased by 26 Mgal/d, and groundwater withdrawals have decreased by 29 Mgal/d, which is the first decrease in groundwater withdrawals since 1950; however, 29 systems reported increased groundwater withdrawals during 2010, and 12 of these 29 systems reported increases of 1 Mgal/d or more. Davidson County had the largest surface-water withdrawal rate (136 Mgal/d) in 2010. The largest groundwater withdrawal rate (151 Mgal/d) by a single public-supply water system was reported by Memphis Light, Gas and Water, which served more than 669,000 people in Shelby County in 2010.Self-supplied industrial water use includes water for such purposes as fabrication, processing, washing, diluting, cooling, or transporting a product; incorporating water into a product; or for sanitation needs in facilities that manufacture various products. Water withdrawals for self-supplied

Supply chain components

OpenAIRE

Vieraşu, T.; Bălăşescu, M.

2011-01-01

In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

Risikobasiertes Supply-Chain-Management

DEFF Research Database (Denmark)

Wieland, Andreas; Schinz, Philipp

2015-01-01

Das Management erlebt seit einigen Jahren dahingehend einen Paradigmenwechsel, dass nicht mehr Unternehmen als einzelne autonome Einheiten im Wettbewerb zueinander stehen, sondern die Supply Chains, in denen diese Unternehmen eingebunden sind. Ursachen hierfür sind beispielsweise die Auslagerung...... von Nicht-Kernprozessen auf vorgelagerte Stufen der Supply Chain oder auf Supply-Chain-Dienstleister sowie die Internationalisierung der Beschaffung. Dieser Paradigmenwechsel hat traditionelles Denken in den Schranken des Systems „Unternehmen“ abgelöst und zum Supply- Chain-Denken geführt, das vor......- und nachgelagerte Stufen des Systems „End-to-End-Supply-Chain“ einbezieht, etwa auch die Lieferanten von Lieferanten....

PENETAPAN RESIDU DAN PERKIRAAN PENETAPAN BATAS MAKSIMUM RESIDU (BMR ORGANOKLORIN PADA SIMPLISIA

Directory of Open Access Journals (Sweden)

Ani Isnawati

2012-10-01

Full Text Available Penggunaaan bahan obat tradisional (simplisia untuk skala industri dan peningkatan produksi tanaman obat dalam skala besar menjadi tidak ekonomis tanpa pestisida. Disatu sisi penggunaan pestisida dapat menguntungkan yaitu menyebabkan toksis pada hama namun disisi lain toksisitas dapat terjadi juga pada manusia, sehingga residu pestisida dalam tanaman obat yang dikonsumsi dalam jangka panjang akan merugikan kesehatan. Batas maksimum Residu (BMR pestisida dalam simplisia baik di Indonesia maupun di negara lain belum ditetapkan. Sehingga untuk itu untuk mengetahui adanya residu pestisida jenis organoklorin yang telah dilarang penggunaannya melalui Permentan No.434.1/kpts/TP.270/7/2001 dan untuk mengetahui batas keamanannya, maka perlu dilakukan penetapan residu organoklorin dalam simplisia dan menetapkan batas keamanan berdasarkan perhitungan secara teoritis. Pengujian residu dilakukan terhadap golongan pestisida organoklorin pada 4 jenis simplisia (daun wungu (Graptophyllum pictum (L Grifl, daun sambiloto Andrographis paniculata Ness, herba pegagan (Centella  asiatica (L Urban, daun tempuyung (Sonchus arvensis (L yang berasal dari 3 lokasi penanaman, yaitu : perkebunan Tanaman Obat Manako (Jawa Barat, Balai Penelitian Tanaman Obat Tawangmangu (BPTO di Jawa Tengah dan Perkebunan Tanaman Obat Purwodadi (Jawa Timur. Pemeriksaan residu pestisida organoklorin menggunakan kromatografi gas dan perhitungan batas keamanan dihitung dengan adanya nilai ADI (Acceptable daily intake yang telah ditetapkan bersama antara JAO dan WHO serta perkiraan banyaknya konsumsi simplisia. Hasil Pengujian residu pestisida organoklorin diperoleh bahwa simplisia daun Wungu (Tawangmangu mengandung residu lindan dengan kadar 0,24 mg/kg, pegagan (Purwodadi, mengandung lindan 0,36 mg/kg dan aldrin 0,31 mg/kg serta pegagan (Manako mengandung heptaklor 0,15 mg/kg dan op-DDE 0,11 mg/kg. Adapun penghitungan BMR heptaklor dan lindan secara teoritis dengan asumsi rata

Supply Chain Management Practices in Toy Supply Chains

DEFF Research Database (Denmark)

Arlbjørn, Jan Stentoft; Johansen, J.; Wong, C. Y.

2005-01-01

Purpose - Innovative products usually experience highly unpredictable and variable demand. This is especially valid for the volatile and seasonal toy industry, which produces high obsolete inventory, lost sales and markdown. In such a volatile industry, what supply chain management (SCM) practices...... (traditional mass-production or push-models). These low-responsive practices in the toy supply chain are not caused only by slow knowledge diffusion. SCM know-how is not yet capable of managing such levels of volatility and seasonality. Therefore, explanations of these theoretical gaps and what new theories...... are required for such extreme volatility and seasonality are proposed. Originality/value - It reveals actual SCM practices in a volatile and seasonal supply chain, such that theoretical and practical gaps are identified. Also, it proposes a model to match manufacturing SCM-practices with retailer SCM-practices....

Understanding your supply chain to reduce the risk of supply chain disruption.

Science.gov (United States)

Wildgoose, Nick; Brennan, Patrick; Thompson, Simon

2012-01-01

Supply chains are at the heart of the way in which organisations operate and compete today; they also play a critical role in overall organisation performance. In the context of increasingly complex and global supply chains, the actions taken to drive down costs are likely to drive risk into the supply chain. The frequency of supply chain disruptions is high and this paper offers practical advice to help reduce the frequency and cost associated with these. There is advice to help with the understanding of how to identify critical suppliers. The reader is guided through comprehensive risk assessment and mitigation approaches and a selection of practical risk solutions and tools that you can use is described. There is a section on the 'dos and don'ts' relating to supplier due diligence. For those organisations facing the challenge of drawing up a business case relating to investment in improving supply chain resiliency, there is also a section outlining some of the business benefits of improving supply chain resiliency.

A Mathematical Approach to Supply Complexity Management Efficiency Evaluation for Supply Chain

Directory of Open Access Journals (Sweden)

Changhee Kim

2015-01-01

Full Text Available This study aims to identify the factors of complexity due to the globalization of supply chain and to measure the management efficiency of the factors which cause the supply complexity within supply chain. This study conducts an analysis to utilize linear programming and bootstrapping, targeting 12 Korean companies among the selected companies in Fortune Global 500. According to the results from the analysis, 4 companies with relatively high management efficiency of the factors which cause the supply complexity and 8 companies with relatively low management efficiency are found. The research findings reveal that public companies with the small number of products, factories, and providers relatively manage the supply complexity compared to private companies. Moreover, this study suggests projection point as a direction for relatively less efficient companies and excess quantity of input which should reduce for its achievement. This study also has an implication to establish a further standard of efficiency to manage the supply complexity for companies.

Sustainable Supply Chain Design

DEFF Research Database (Denmark)

Bals, Lydia; Tate, Wendy

A significant conceptual and practical challenge is how to integrate triple bottom line (TBL; including economic, social and environmental) sustainability into global supply chains. Although this integration is necessary to slow down global resource depletion, understanding is limited of how...... to implement TBL goals across the supply chain. In supply chain design, the classic economic perspective still dominates, although the idea of the TBL is more widely disseminated. The purpose of this research is to add to the sustainable supply chain management literature (SSCM) research agenda...... by incorporating the physical chain, and the (information and financial) support chains into supply chain design. This manuscript tackles issues of what the chains are designed for and how they are designed structurally. Four sustainable businesses are used as illustrative case examples of innovative supply chain...

Spatiotemporal Variation of China’s State-Owned Construction Land Supply from 2003 to 2014

Directory of Open Access Journals (Sweden)

Min Jiang

2016-11-01

Full Text Available State-owned construction land is the dominant legal land source for construction in China and its supply influences urban expansion, house prices, and economic development, among other factors. Surprisingly, limited attention has been directly devoted to the spatiotemporal variation in land supply or the driving factors. This paper applied a centroid model and hotspot analysis, and created a newly increased construction land dependence-degree index (NCD to present the spatiotemporal variations of China’s construction land supply magnitude and pattern from 2003 to 2014, using land supply data from 339 cities. A two-way fixed effect model was introduced to reveal the influence of the socio-economic driving factors. The results showed that China’s state-owned construction land supply area (CLSA and newly increased construction land supply area (NCSA both increased during the period from 2003 to 2014, the geographic centroid of CLSA and NCSA moved northwest. NCD showed an overall increasing trend, and hotspots with high NCD migrated from the east region to the west region and shifted from an “east hot and west cold” pattern in 2003 to an “east cold and west hot” pattern in 2014. The gross domestic product (GDP has a U-shape effect on CLSA and NCD. The population, average annual wage of workers, and investment in fixed assets (fiv have positive effects on CLSA, and fiv also has a positive effect on NCD. The increasing ratio of tertiary industry added value to secondary industry added value reduces CLSA and NCD, and the effects of state policies vary from year to year. Different land supply policies should be implemented for cities in different development stages.

Residual magnetic field in rotary machines; Campo magnetico residual en maquinas rotatorias

Energy Technology Data Exchange (ETDEWEB)

Gonzalez V, Esteban A; Apanco R, Marcelino [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2007-07-01

The residual magnetism is a phenomenon in which the magnetic dipoles of a substance are oriented in a certain degree. On the other hand, when internal forces exist capable of aligning elementary magnetic dipoles of a material, a permanent magnet is obtained. Just as in a conductor or in a material, in the elements of a rotary electrical machine magnetic fields can be induced that produce a residual magnetism or magnetization. In the rotary electrical machines, the magnetization phenomenon causes serious problems, such as the generation of induced currents that propitiate the mechanical wear in bearings, collars, trunnions and inclusive in the shaft, by effects known as pitting, frosting and spark tracks, as well as erroneous readings in vibration and temperature sensors, that in some cases can cause the shut down of the machine. In this article are presented the general concepts on the residual magnetism in rotary electrical machines, the causes that originate it and the problems that arises, as well as the demagnetization of the components that have residual magnetic field. The results obtained by the area of Electrical Equipment of the Instituto de Investigaciones Electricas are revised, during the execution of activities related to the measurement and elimination of the residual magnetic field in rotary electrical machines. [Spanish] El magnetismo residual es un fenomeno en el que los dipolos magneticos de una sustancia se encuentran orientados en un grado determinado. Por otro lado, cuando existen fuerzas internas capaces de alinear los dipolos magneticos elementales de un material, se tiene un iman permanente. Al igual que en un conductor o un material, en los elementos de una maquina electrica rotatoria se pueden inducir campos magneticos que producen un magnetismo residual o magnetizacion. En las maquinas electricas rotatorias, el fenomeno de magnetizacion causa graves problemas, como la generacion de corrientes inducidas que propician el desgaste mecanico

Modified complementary ensemble empirical mode decomposition and intrinsic mode functions evaluation index for high-speed train gearbox fault diagnosis

Science.gov (United States)

Chen, Dongyue; Lin, Jianhui; Li, Yanping

2018-06-01

Complementary ensemble empirical mode decomposition (CEEMD) has been developed for the mode-mixing problem in Empirical Mode Decomposition (EMD) method. Compared to the ensemble empirical mode decomposition (EEMD), the CEEMD method reduces residue noise in the signal reconstruction. Both CEEMD and EEMD need enough ensemble number to reduce the residue noise, and hence it would be too much computation cost. Moreover, the selection of intrinsic mode functions (IMFs) for further analysis usually depends on experience. A modified CEEMD method and IMFs evaluation index are proposed with the aim of reducing the computational cost and select IMFs automatically. A simulated signal and in-service high-speed train gearbox vibration signals are employed to validate the proposed method in this paper. The results demonstrate that the modified CEEMD can decompose the signal efficiently with less computation cost, and the IMFs evaluation index can select the meaningful IMFs automatically.

Laparoscopic donor nephrectomy increases the supply of living donor kidneys: a center-specific microeconomic analysis.

Science.gov (United States)

Kuo, P C; Johnson, L B

2000-05-27

A tenet of microeconomics is that new technology will shift the supply curve to the right. Laparoscopic donor nephrectomy (LDN) is a new technique for removal of living donor kidneys. Centers performing this procedure have noted an increased number of patients presenting for donor evaluation. This has not been previously studied. The records of all LDN performed from May 1998 to February 1999 were reviewed. The following variables were examined: sex, age, related vs. unrelated donation, estimated blood loss, i.v. analgesia, length of stay, and time out of work. Donors undergoing traditional open donor nephrectomy during January 1997 to May 1998 served as the control group. A composite cost index was constructed. LDN significantly decreased length of stay, pain, and time out of work; the supply function shifted to the right. Telephone interviews revealed that 47% donated solely because of the LDN procedure. LDN increases the supply of living donor kidneys.

10 CFR 600.324 - Supplies.

Science.gov (United States)

2010-01-01

... unused supplies. If the inventory of unused supplies exceeds $5,000 in total aggregate value and the... 10 Energy 4 2010-01-01 2010-01-01 false Supplies. 600.324 Section 600.324 Energy DEPARTMENT OF... Supplies. (a) Title vests in the recipient upon acquisition of supplies acquired with Federal funds under...

32 CFR 34.24 - Supplies.

Science.gov (United States)

2010-07-01

... shall retain any unused supplies. If the inventory of unused supplies exceeds $5,000 in total aggregate... 32 National Defense 1 2010-07-01 2010-07-01 false Supplies. 34.24 Section 34.24 National Defense... § 34.24 Supplies. (a) Title shall vest in the recipient upon acquisition for supplies acquired with...

Supply chain components

Directory of Open Access Journals (Sweden)

Vieraşu, T.

2011-01-01

Full Text Available In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

Phytotoxicity and groundwater impacts of leaching from thermal treatment residues in roadways.

Science.gov (United States)

Phoungthong, Khamphe; Shao, Li-Ming; He, Pin-Jing; Zhang, Hua

2018-01-01

The use of coal fly ash (CFA), municipal solid waste incinerator bottom ash (MSWIBA) and flue gas desulfurization residue (FGDR) in road construction has become very common owing to its economical advantages. However, these residues may contain toxic constituents that pose an environmental risk if they leach out and flow through the soil, surface water and groundwater. Therefore, it is necessary to assess the ecotoxicity and groundwater impact of these residues before decisions can be made regarding their utilization for road construction. In this study, the physico-chemical characteristics, leaching and phytotoxicity of these residues were investigated. Specifically, multivariate analyses were used to evaluate the contributions of the leaching constituents of the CFA, MSWIBA and FGDR leachates to the germination index of wheat seeds. B, Ba, Cr, Cu, Fe and Pb were found to be more toxic to the wheat seeds than the other heavy metals. Furthermore, the leached concentrations of the constituents from the CFA, MSWIBA and FGDR were below the regulatory threshold limits of the Chinese identification standard for hazardous wastes. Analyses conducted using a numerical groundwater model (WiscLEACH) indicated that the predicted field concentrations of metals from the CFA, MSWIBA and FGDR increased with time up to about 30years at the point of compliance, then decreased with time and distance. Overall, this study demonstrated that the risks resulting from MSWIBA, CFA and FGDR leaching could be assessed before its utilization for road construction, providing crucial information for the adoption of these alternative materials. Copyright © 2016. Published by Elsevier B.V.

Crop residues as a potential renewable energy source for Malawi's cement industry

DEFF Research Database (Denmark)

Gondwe, Kenneth J.; Chiotha, Sosten S.; Mkandawire, Theresa

2017-01-01

that the projected total energy demands in 2020, 2025 and 2030 were approximately 177 810 TJ, 184 210 TJ and 194 096 TJ respectively. The highest supply potentials were found to be in the central and southern regions of Malawi, coinciding with the locations of the two clinker plants. Crop residues could meet 45......-57% of the national total energy demand. The demand from the cement industry is only 0.8% of the estimated biomass energy potential. At an annual production of 600 000 t of clinker and 20% biomass co-firing with coal, 18 562 t of coal consumption would be avoided and 46 128 t of carbon dioxide emission reduction...

Financing the End-to-end Supply Chain: A Reference Guide to Supply Chain Finance

OpenAIRE

Templar, Simon; Hofmann, Erik; Findlay, Charles

2016-01-01

Financing the End to End Supply Chain provides readers with a real insight into the increasingly important area of supply chain finance. It demonstrates the importance of the strategic relationship between the physical supply of goods and services and the associated financial flows. The book provides a clear introduction, demonstrating the importance of the strategic relationship between supply chain and financial communities within an organization. It contains vital information on how supply...

Mapping allostery through computational glycine scanning and correlation analysis of residue-residue contacts.

Science.gov (United States)

Johnson, Quentin R; Lindsay, Richard J; Nellas, Ricky B; Fernandez, Elias J; Shen, Tongye

2015-02-24

Understanding allosteric mechanisms is essential for the physical control of molecular switches and downstream cellular responses. However, it is difficult to decode essential allosteric motions in a high-throughput scheme. A general two-pronged approach to performing automatic data reduction of simulation trajectories is presented here. The first step involves coarse-graining and identifying the most dynamic residue-residue contacts. The second step is performing principal component analysis of these contacts and extracting the large-scale collective motions expressed via these residue-residue contacts. We demonstrated the method using a protein complex of nuclear receptors. Using atomistic modeling and simulation, we examined the protein complex and a set of 18 glycine point mutations of residues that constitute the binding pocket of the ligand effector. The important motions that are responsible for the allostery are reported. In contrast to conventional induced-fit and lock-and-key binding mechanisms, a novel "frustrated-fit" binding mechanism of RXR for allosteric control was revealed.

Pyrolysis of automotive shredder residue for the production of fuel-grade gas

International Nuclear Information System (INIS)

Sharp, L.L.; Ness, R.O. Jr.

1993-01-01

Every year eight to ten million cars and trucks are disposed of by shredding at one of the 200 auto shredders located in the United States. Automotive shredder residue (ASR) is a by-product created in the dismantling of automobiles. Figure 1 illustrates the process by which ASR is generated. An automobile is stripped of useful and/or hazardous items, such as the gas tank, battery, tires, and radiator. Although it is beneficial to have these items removed for safety and environmental concerns, this is not always accomplished. After removal of some or all of these items, the automobile is shredded to provide a material less than 4 inches in size and composed of approximately 50% organic and 50% inorganic fractions. Ferrous scrap is then separated out magnetically. This ferrous scrap supplies the steel industry with 12 to 14 million tons per year for electric arc furnace feedstock. Air cyclone separators isolate a low density open-quotes fluffclose quotes from the nonferrous fraction (aluminum, copper, etc.). This fluff (shredder residue) is composed of a variety of plastics, fabrics, foams, glass, rubber, and an assortment of contaminants. Fluff bulk density is approximately 20 lb/ft

Plant Residual Management in different Crop Rotations System on Potato Tuber Yield Loss Affected by Wireworms

Directory of Open Access Journals (Sweden)

A. Zarea Feizabadi

2016-07-01

Full Text Available Introduction: Selection a proper crop rotation based on environmental conservation rules is a key factor for increasing long term productivity. On the other hand, the major problem in reaching agricultural sustainability is lack of soil organic matter. Recently, a new viewpoint has emerged based on efficient use of inputs, environmental protection, ecological economy, food supply and security. Crop rotation cannot supply and restore plant needed nutrients, so gradually the productivity of rotation system tends to be decreased. Returning the plant residues to the soil helps to increase its organic matter and fertility in long-term period. Wireworms are multi host pests and we can see them in wheat and barley too. The logic way for their control is agronomic practices like as crop rotation. Wireworms’ population and damages are increased with using grasses and small seed gramineas in mild winters, variation in cropping pattern, reduced chemical control, and cover crops in winter. In return soil cultivation, crop rotation, planting date, fertilizing, irrigation and field health are the examples for the effective factors in reducing wireworms’ damage. Materials and Methods: In order to study the effect of crop rotations, residue management and yield damage because of wireworms’ population in soil, this experiment was conducted using four rotation systems for five years in Jolgeh- Rokh agricultural research station. Crop rotations were included, 1 Wheat monoculture for the whole period (WWWWW, 2 Wheat- wheat- wheat- canola- wheat (WWWCW, 3 Wheat- sugar beet- wheat- potato- wheat (WSWPW, 4 Wheat- maize- wheat- potato- wheat (WMWPW as main plots and three levels of returning crop residues to soil (returning 0, 50 and 100% produced crop residues to soil were allocated as sub plots. This experiment was designed as split plot based on RCBD design with three replications. After ending each rotation treatment, the field was sowed with potato cv. Agria

Characterization Report on Sand, Slag, and Crucible Residues and on Fluoride Residues

International Nuclear Information System (INIS)

Murray, A.M.

1999-01-01

This paper reports on the chemical characterization of the sand, slag, and crucible (SS and C) residues and the fluoride residues that may be shipped from the Rocky Flats Environmental Technology Site (RFETS) to Savannah River Site (SRS)

The role of enterprise systems in supply chain networks: a taxonomy of supply chain strategies

DEFF Research Database (Denmark)

Møller, Charles

2006-01-01

in the supply chain and to choose the right supply chain strategy. The work is based on a comprehensive study of the Supply Chain Management (SCM) and Enterprise Resource Planning (ERP) literature and the study suggests that there is an emerging new research potential for Enterprise Systems (ES) in the supply......This paper proposes a taxonomy for supply chain integration strategies. The taxonomy is based on the contingencies of supply chain network coupling and the Extended Enterprise Systems (EES) architecture in the supply chain. The purpose of this model is to map the portfolio of relations...

Investigation of Sensitivity of Some Pulses and Agronomic Crops to Soil Residue of Idosulfuron-mesosulfurun Herbicide

Directory of Open Access Journals (Sweden)

E. Izadi-Darbandi

2013-03-01

Full Text Available To study the sensitivity of chick pea, bean, lentil, rapeseed, sugarbeet and tomato to soil residual concentration of Idosulfuron-mesosulfurun herbicide, an experiment was carried out under controlled conditions at the College of Agriculture, Ferdowsi University of Mashhad, Iran, in 2010. The studied factors were the 6 mentioned crops, and 7 levels of soil residual concentration of Idosulfuron-mesosulfurun herbicide (0, 0.0015, 0.0037, 0.0079, 0.015, 0.031 and 0.047 mg per kg of soil. The factorial experiment was carried out as a completely randomized design with three replications. Crops' emergence percentage was determined one week after their emergence. Plants' survival percentage and shoot and root biomass production were measured 30 days after their emergence. Results showed that all mentioned characteristics decreased significantly (P<0.01 in the presence of soil residue of the herbicide. Increasing Idosulfuron-mesosulfurun residual concentration in soil decreased emergence and shoot and root biomass production. Bean had the lowest shoot (44% and root (66.78% biomass loss and tomato had the highest shoot (96.38% and root (89.64% biomass loss. Based on ED50 index, pea (0.0079 mg/kg soil was the most tolerant and tomato (0.0003 mg/kg soil was the most susceptible crop to soil residues of Idosulfuron-mesosulfurun, and other crops ranked in between as: tomato< sugarbeet< rapeseed< lentil< bean< pea. In general, these results showed that soil residue of Idosulfuron-mesosulfurun can injure rotation crops and it is important to consider their sensitivity in rotation programming.

Scaling of human body composition to stature: new insights into body mass index.

Science.gov (United States)

Heymsfield, Steven B; Gallagher, Dympna; Mayer, Laurel; Beetsch, Joel; Pietrobelli, Angelo

2007-07-01

Although Quetelet first reported in 1835 that adult weight scales to the square of stature, limited or no information is available on how anatomical body compartments, including adipose tissue (AT), scale to height. We examined the critical underlying assumptions of adiposity-body mass index (BMI) relations and extended these analyses to major anatomical compartments: skeletal muscle (SM), bone, residual mass, weight (AT+SM+bone), AT-free mass, and organs (liver, brain). This was a cross-sectional analysis of 2 body-composition databases: one including magnetic resonance imaging and dual-energy X-ray absorptiometry (DXA) estimates of evaluated components in adults (total n=411; organs=76) and the other a larger DXA database (n=1346) that included related estimates of fat, fat-free mass, and bone mineral mass. Weight, primary lean components (SM, residual mass, AT-free mass, and fat-free mass), and liver scaled to height with powers of approximately 2 (all P2 (2.31-2.48), and the fraction of weight as bone mineral mass was significantly (Pshort and tall subjects with equivalent BMIs have similar but not identical body composition, provide new insights into earlier BMI-related observations and thus establish a foundation for height-normalized indexes, and create an analytic framework for future studies.

Immunoexpression of vascular endothelial growth factor in periapical granulomas, radicular cysts, and residual radicular cysts.

Science.gov (United States)

Nonaka, Cassiano Francisco Weege; Maia, Alexandre Pinto; Nascimento, George João Ferreira do; de Almeida Freitas, Roseana; Batista de Souza, Lélia; Galvão, Hébel Cavalcanti

2008-12-01

Our aim was to assess and compare the immunoexpression of vascular endothelial growth factor (VEGF) in periapical granulomas (PGs), radicular cysts (RCs), and residual radicular cysts (RRCs), relating it to the angiogenic index and the intensity of the inflammatory infiltrate. Twenty PGs, 20 RCs, and 10 RRCs were evaluated by immunohistochemistry using anti-VEGF antibody. Angiogenic index was determined by microvessel count (MVC) using anti-von Willebrand factor antibody. The PGs and RCs showed higher expression of VEGF than the RRCs. Lesions presenting few inflammatory infiltrate revealed the lowest immunoexpression of VEGF (P .05). VEGF is present in periapical inflammatory lesions but at a lower level in RRCs. The expression of this proangiogenic factor is closely related to the intensity of the inflammatory infiltrate in these lesions.

Effect of residual wood on a morphology of mountain stream Cremos; Vplyv zvyskov dreva na morfologiu horskeho toku Cremos

Energy Technology Data Exchange (ETDEWEB)

Kralcakova, M [Univerzita Komenskeho v Bratislave, Prirodovedecka fakulta, Katedra fyzickej geografie a geoekologie, 84215 Bratislava (Slovakia)

2012-04-25

Several research papers are dedicated to the effect of wood in the river bed of the flow. It is done on the basis of empirical and theoretical knowledge. Globally, field research is practised on the application of knowledge on the impact of scrap wood mainly in the upstream mountain streams. The reason is that the flows founded in these altitudes are more likely inclined to supply wood because of forest cover area and the resulting consequences for a river-basin. In my research I mainly dealt with the impact of individual residues in stream sections of Cremos. During studying wood residues a determination of its variability was important. On the basis of this variability is important to define a classification of individual pieces of wood within the river-basin. (author)

The Use of Nuclear Technique for Evaluation of Residual Effect of P Fertilizer on the Growth of Paddy

International Nuclear Information System (INIS)

Idawati; Rasjid, Havid; Haryanto; Sisworo, Elsje L

1998-01-01

Plant growth is much affected by nutrient supply so that, in practicing periodic P fertilization, monitoring of available P for plant is necessary. The aim of the conducted experiment was to study P availability for paddy after two growing seasons without P fertilization. Paddy of IR64 variety was tested to grow on Pusakanegara soil (planting IV) which had been treated in the three previous growing season (planting I) with P fertilizers at the rates of 0kg P-PR/ha (OP), 120 kg P-PR/ha (120 PR). 180 kg P-PR/ha (180 PR), 60 kg P-TSP/ha (60 TSP), and 90 kg P-TSP/ha (90 TSP). N and K fertilizers were applied as basal fertilizers. 32 P in the from of KH 2 32 PO 4 was used in isotope dilution method to gain the information of P availability. It was seen that in this Planting IV paddy was growing poorly caused by P deficiency as expressed by L value of P residue which was very low and even giving almost no increase to L value of the soil. The amount of P derived from residue found in plant at Planting IV was only about 3 to 11% of P derived from fertilizer found at Planting 1. This information gave warning that P fertilization was again needed after an interval of two growing seasons without P fertilization regarding that in those two growing seasons paddy grown well as previously reported. Furthermore, it seemed that TSP residue had a tendency to be more potential than phosphate rock residue in releasing available P. The higher of TSp residue made paddy grown on soil with TSP residue have higher ability grown soil with phosphate residue. (author)

Petroleum supply monthly

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-01

The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blends, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

Regional indexes for France. Methodology

International Nuclear Information System (INIS)

2006-01-01

According to the U.S. Department of Energy, an estimated 25% of the GNP is affected by weather-related events. The variations in temperature - even small ones - can also have long-lasting effects on the operational results of a company. Among other, the Energy supply sector is sensitive to weather risks: a milder or harsher than usual winter leads to a decrease or increase of energy consumption. The price of electricity on power trading facilities like Powernext is especially sensitive to odd changes in temperatures. Powernext and Meteo-France (the French meteorological agency) have joined expertise in order to promote the use of weather indices in term of decision making or underlying of hedging tools to energy actors, end users from any other sector of activity and specialists of the weather risk hedging. The Powernext Weather indices are made from information collected by Meteo-France's main observation network according to the norms of international meteorology, in areas carefully selected. The gross data are submitted to a thorough review allowing the correction of abnormalities and the reconstitution of missing data. Each index is fashioned to take into account the economic activity in the various regions of the country as represented by each region's population. This demographic information represents a fair approximation of the weight of the regional economic activity. This document presents the calculation methodology of regional weather indexes for France. Each regional index covers an homogenous area in terms of temperature represented by the biggest city. Five reference cities are used to represent the 22 economical regions of France (Paris Orly, Lyon, Marignane, Bordeaux and Strasbourg). (J.S.)

Cost of Oil and Biomass Supply Shocks under Different Biofuel Supply Chain Configurations

Energy Technology Data Exchange (ETDEWEB)

Uria Martinez, Rocio [ORNL; Leiby, Paul Newsome [ORNL; Brown, Maxwell L. [National Renewable Energy Laboratory (NREL)

2018-04-01

This analysis estimates the cost of selected oil and biomass supply shocks for producers and consumers in the light-duty vehicle fuel market under various supply chain configurations using a mathematical programing model, BioTrans. The supply chain configurations differ by whether they include selected flexibility levers: multi-feedstock biorefineries; advanced biomass logistics; and the ability to adjust ethanol content of low-ethanol fuel blends, from E10 to E15 or E05. The simulated scenarios explore market responses to supply shocks including substitution between gasoline and ethanol, substitution between different sources of ethanol supply, biorefinery capacity additions or idling, and price adjustments. Welfare effects for the various market participants represented in BioTrans are summarized into a net shock cost measure. As oil accounts for a larger fraction of fuel by volume, its supply shocks are costlier than biomass supply shocks. Corn availability and the high cost of adding biorefinery capacity limit increases in ethanol use during gasoline price spikes. During shocks that imply sudden decreases in the price of gasoline, the renewable fuel standard (RFS) biofuel blending mandate limits the extent to which flexibility can be exercised to reduce ethanol use. The selected flexibility levers are most useful in response to cellulosic biomass supply shocks.

Supply Cain Risk Management

OpenAIRE

Goodwin, Les

2011-01-01

“The management of supply chain risk is crucial to any business, more so to Rolls Royce who face an almost doubling of load within the next 10 years. So what is supply chain risk management and how well is it deployed within an operational business of Rolls Royce? What are the tools and techniques available and what are the key issues around implementing world class supply chain risk management with a Supply Chain Unit within Rolls Royce?”

Joint Optimal Production Planning for Complex Supply Chains Constrained by Carbon Emission Abatement Policies

Directory of Open Access Journals (Sweden)

Longfei He

2014-01-01

Full Text Available We focus on the joint production planning of complex supply chains facing stochastic demands and being constrained by carbon emission reduction policies. We pick two typical carbon emission reduction policies to research how emission regulation influences the profit and carbon footprint of a typical supply chain. We use the input-output model to capture the interrelated demand link between an arbitrary pair of two nodes in scenarios without or with carbon emission constraints. We design optimization algorithm to obtain joint optimal production quantities combination for maximizing overall profit under regulatory policies, respectively. Furthermore, numerical studies by featuring exponentially distributed demand compare systemwide performances in various scenarios. We build the “carbon emission elasticity of profit (CEEP” index as a metric to evaluate the impact of regulatory policies on both chainwide emissions and profit. Our results manifest that by facilitating the mandatory emission cap in proper installation within the network one can balance well effective emission reduction and associated acceptable profit loss. The outcome that CEEP index when implementing Carbon emission tax is elastic implies that the scale of profit loss is greater than that of emission reduction, which shows that this policy is less effective than mandatory cap from industry standpoint at least.

Residual stress by repair welds

International Nuclear Information System (INIS)

Mochizuki, Masahito; Toyoda, Masao

2003-01-01

Residual stress by repair welds is computed using the thermal elastic-plastic analysis with phase-transformation effect. Coupling phenomena of temperature, microstructure, and stress-strain fields are simulated in the finite-element analysis. Weld bond of a plate butt-welded joint is gouged and then deposited by weld metal in repair process. Heat source is synchronously moved with the deposition of the finite-element as the weld deposition. Microstructure is considered by using CCT diagram and the transformation behavior in the repair weld is also simulated. The effects of initial stress, heat input, and weld length on residual stress distribution are studied from the organic results of numerical analysis. Initial residual stress before repair weld has no influence on the residual stress after repair treatment near weld metal, because the initial stress near weld metal releases due to high temperature of repair weld and then stress by repair weld regenerates. Heat input has an effect for residual stress distribution, for not its magnitude but distribution zone. Weld length should be considered reducing the magnitude of residual stress in the edge of weld bead; short bead induces high tensile residual stress. (author)

The triple-A supply chain.

Science.gov (United States)

Lee, Hau L

2004-10-01

Building a strong supply chain is essential for business success. But when it comes to improving their supply chains, few companies take the right approach. Many businesses work to make their chains faster or more cost-effective, assuming that those steps are the keys to competitive advantage. To the contrary: Supply chains that focus on speed and costs tend to deteriorate over time. The author has spent 15 years studying more than 60 companies to gain insight into this and other supply chain dilemmas. His conclusion: Only companies that build supply chains that are agile, adaptable, and aligned get ahead of their rivals. All three components are essential; without any one of them, supply chains break down. Great companies create supply chains that respond to abrupt changes in markets. Agility is critical because in most industries, both demand and supply fluctuate rapidly and widely. Supply chains typically cope by playing speed against costs, but agile ones respond both quickly and cost-efficiently. Great companies also adapt their supply networks when markets or strategies change. The best supply chains allow managers to identify structural shifts early by recording the latest data, filtering out noise, and tracking key patterns. Finally, great companies align the interests of the partners in their supply chains with their own. That's important because every firm is concerned solely with its own interests. If its goals are out of alignment with those of other partners in the supply chain, performance will suffer. When companies hear about the triple-A supply chain, they assume that building one will require increased technology and investment. But most firms already have the infrastructure in place to create one. A fresh attitude alone can go a long way toward making it happen.

SITE INDEX CURVES AND HYPSOMETRIC RELATIONSHIP FOR Eucalyptus grandis PLANTATIONS FOR THE CAMPOS GERAIS REGION, PARANA STATE

Directory of Open Access Journals (Sweden)

Fabiane Aparecida de Souza Retslaff

2015-06-01

Full Text Available The study aimed to fit mathematical models for the construction of Site Index curves and to estimate heights at different ages for Eucalyptus grandis in the Campos Gerais region, Parana State. The data used to fit the models came from permanent, temporary plots and pre-harvesting inventory, covering ages from 2.5 to 26.5 years. Several models were tested to represent the sites and the hypsometric relationship. The Site Index curves were constructed by the guide-curve method. For the Site Index, the Chapman-Richards model showed the best fit and precision statistics, generating 5 Site Index curves (range of 5 m with the Chapman-Richards model. The four hypsometric models tested showed satisfactory performance and similar statistics and the inclusion of the variables dominant height or site index did not substantially improve the goodness of fit statistics, but the residues were more homogeneous and closer to zero.

Alternative supply specifications and estimates of regional supply and demand for stumpage.

Science.gov (United States)

Kent P. Connaughton; David H. Jackson; Gerard A. Majerus

1988-01-01

Four plausible sets of stumpage supply and demand equations were developed and estimated; the demand equation was the same for each set, although the supply equation differed. The supply specifications varied from the model of regional excess demand in which National Forest harvest levels were assumed fixed to a more realistic model in which the harvest on the National...

Development of a Plant Health Index Monitor

International Nuclear Information System (INIS)

Heo, Gyun Young; An, Sang Ha; Seo, Ho Joon; Kim, Cho

2010-01-01

Since 2008, BNF Technology Inc. and Kyung Hee University have developed the 'Plant Health Index (PHI)' which is a software package to detect 'unhealthy conditions' of plant equipment in advance. While the difference between a setpoint and an operational condition is called 'process margin', the residual between an anticipated normal condition and an operational condition is called 'process uncertainty' or 'healthiness' in this study. It is obvious that the anomalies in process uncertainty can be observed earlier than those in process margin, which is the concept of 'early-warning' proposed in the recent condition-based maintenance (CBM) studies. One of the key factors for implementing the early warning capability should be how to expect the anticipated normal conditions using available information. The PHI was developed on the basis of empirical models, and we have published a few papers with regarding to the core technologies of the PHI. However, the overall architecture and features of the PHI have not been introduced to academic area so far. This paper delineates the overview of the PHI, and focuses on the recently developed module, which is the health index generator

Development of a Plant Health Index Monitor

Energy Technology Data Exchange (ETDEWEB)

Heo, Gyun Young [Kyung Hee University, Yongin (Korea, Republic of); An, Sang Ha [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Seo, Ho Joon [BNF Technology Inc., Daejeon (Korea, Republic of); Kim, Cho [Korea South-East Power Co., Seoul (Korea, Republic of)

2010-05-15

Since 2008, BNF Technology Inc. and Kyung Hee University have developed the 'Plant Health Index (PHI)' which is a software package to detect 'unhealthy conditions' of plant equipment in advance. While the difference between a setpoint and an operational condition is called 'process margin', the residual between an anticipated normal condition and an operational condition is called 'process uncertainty' or 'healthiness' in this study. It is obvious that the anomalies in process uncertainty can be observed earlier than those in process margin, which is the concept of 'early-warning' proposed in the recent condition-based maintenance (CBM) studies. One of the key factors for implementing the early warning capability should be how to expect the anticipated normal conditions using available information. The PHI was developed on the basis of empirical models, and we have published a few papers with regarding to the core technologies of the PHI. However, the overall architecture and features of the PHI have not been introduced to academic area so far. This paper delineates the overview of the PHI, and focuses on the recently developed module, which is the health index generator

Analysis of Health Indicators in Two Rural Communities on the Colombian Caribbean Coast: Poor Water Supply and Education Level Are Associated with Water-Related Diseases.

Science.gov (United States)

Ruiz-Díaz, María Stephany; Mora-García, Gustavo José; Salguedo-Madrid, Germán Israel; Alario, Ángelo; Gómez-Camargo, Doris Esther

2017-11-01

Water-related diseases are closely linked with drinking water, sanitation, and hygiene (WASH) indicators, socioeconomic status, education level, or dwelling's conditions. Developing countries exhibit a particular vulnerability to these diseases, especially rural areas and urban slums. This study assessed socioeconomic features, WASH indicators, and water-related diseases in two rural areas of the Colombian Caribbean coast. Most of this population did not finish basic education (72.3%, N = 159). Only one of the communities had a water supply (aqueduct), whereas the other received water via an adapted tanker ship. No respondents reported sewage services; 92.7% ( N = 204) had garbage service. Reported cases of diarrhea were associated with low education levels ( P = 2.37 × 10 -9 ) and an unimproved drinking water supply ( P = 0.035). At least one fever episode was reported in 20% ( N = 44) of dwellings, but the cases were not related to any indicator. The Aedes/ House index (percentage of houses that tested positive for Aedes larvae and/or pupae) was 69%, the container index (percentage of water-holding containers positive for Aedes larvae or pupae) 29.4%, and the Breteau index (number of positive containers per 100 houses in a specific location) was three positive containers per 100 inspected houses. The presence of positive containers was associated with the absence of a drinking water supply ( P = 0.04). The community with poorer health indicators showed greater health vulnerability conditions for acquisition of water-related diseases. In summary, water supply and educational level were the main factors associated with the presence of water-related diseases in both communities.

Effects of a healthy food supply intervention in a military setting: positive changes in cereal, fat and sugar containing foods

Directory of Open Access Journals (Sweden)

Bingham Clarissa ML

2012-07-01

Full Text Available Abstract Background In Finland, all men are liable to military service and a clear majority completes service. The increasing prevalence of obesity also among soldiers concerns conscripts’ food choices. Conscripts are served nutritionally planned regular main meals but individual choices take place in free-time eating. This study assesses the effects in conscripts’ eating habits in an intervention targeting the supply of healthy foods available in the military setting. Methods Participants were 604 18-21-year old male conscripts of whom 242 belonged to Control Group and 362 to Intervention Group. Participants of Control Group were historical controls performing military service one year before Intervention Group. The intervention targeted selection, placement, and attractiveness of healthy foods in garrison refectories and soldier’s home cafeterias, the two main food providers in the military. Dietary intake data was collected by self-administered questionnaire at three time points: before/beginning of military service (T0, 8 weeks (T1 and 6 months (T2 of military service. Outcome measures were food consumption frequencies and four dietary indexes (Cereal Index, Fruit and Vegetable Index, Fat Index and Sugar Index developed to characterize the diet. Changes between study groups in outcome variables and in time were analysed by repeated-measures analysis of covariance. Results Significant (p  Conclusions In the military setting, healthier food choices can be promoted by intervening on the main food environments by improving the supply of healthy foods. However, impacting on conscripts’ individual selection as fruit and vegetable consumption is more challenging.

Reactivity of Athabasca residue and of its SARA fractions during residue hydroconversion

Energy Technology Data Exchange (ETDEWEB)

Verstraete, J.; Danial-Fortain, P.; Gauthier, T.; Merdrignac, I. [IFP-Lyon, Vermaison (France); Budzinski, H. [Bordeaux Univ. (France). ISM-LPTC, UMR CNRS

2009-07-01

Residue conversion processes are becoming increasingly important because of the declining market for residual fuel oil and a greater demand for middle distillates. Ebullated-bed hydroconversion is a commercially proven technology for converting heavy feedstocks with high amounts of impurities. The process enables the conversion of atmospheric or vacuum residues at temperatures up to 440 degrees C, and at liquid hourly space velocity (LHSV) conditions in the range of 0.15 to 0.5 per hour. A 540 degrees C conversion of up to 80 weight per cent can be achieved under these conditions. This paper reported on a research study conducted at IFP Lyon in which the residue hydroconversion in a large-scale ebullated bed bench unit was investigated to determine the impact of operating conditions and feed properties on yield and product qualities. Hydrogen was added to the feed in the bench units to keep a high hydrogen partial pressure and favour the catalytic hydroconversion reactions. In a typical test, the reactor was fed with 50 g of feedstock and 0.45 g of crushed equilibrium industrial NiMo catalyst, pressurized hydrogen and quickly heated at the reaction temperature. This paper also discussed the conversion of Athabasca bitumen residue in the large-scale pilot plant and also in the small scale batch reactor. The effect of operating temperature and space velocity was examined. The reactivity of the saturates, aromatics, resins and asphaltenes (SARA) fractions of the bitumen was studied separately in order to better understand the conversion mechanisms and reactivities. The Athabasca bitumen feed and SARA fractions were also analyzed in terms of standard petroleum analysis, SARA fractionation, elemental analysis, size exclusion chromatography (SEC) and 13C NMR. Hydroconversion experiments were conducted in the batch unit at different reaction temperatures and reaction times. A comparison of small-scale batch results with those obtained with the continuous large-scale bench

Choice evaluation of power supply composition using the mapping method of the long-term energy demand-and-supply scenario

International Nuclear Information System (INIS)

Tatematsu, Kenji

2013-03-01

Long-term energy demand-and-supply were analyzed for our country using the MARKAL model, supposing six kinds of energy demand-and-supply scenarios where different installed capacity of nuclear power generation and the emission standard of carbon-dioxide were employed. It was shown that even when nuclear power generation was not used, the carbon-dioxide emissions in the whole country and a power generation sector are reducible by 37% and 47% in 2050 from the 1990 level, respectively. However, when nuclear power generation was phase-out and renewable energy and natural gas were substituted, it was found that an average power generating cost was higher than the case where use of nuclear or coal was continued, 3.7 yen/kWh or more. Moreover, in the case where immediate cessation of the nuclear power generation was carried out, it was also shown that a current average power generating cost rose by 4.4 yen/kWh. In order to evaluate and visualize the influence of power supply composition change on both the average power generating cost and the carbon-dioxide emissions, a new mapping method was proposed where diversity of an energy source, the carbon-dioxide emissions, and the average power generating cost were used as indexes. Based on the result of model analysis, when nuclear power generation was substituted with renewable energy, natural gas, or coal, oligopoly of an energy source was shown to increase sharply by abolition of nuclear power generation. These results showed that by continuing use of the nuclear power generation with a fixed scale, less carbon-dioxide emissions, avoiding oligopolization of an energy source and suppressing the steep rise of an average power generating cost were possible. (author)

Development of a coastal drought index using salinity data

Science.gov (United States)

Conrads, Paul; Darby, Lisa S.

2017-01-01

A critical aspect of the uniqueness of coastal drought is the effects on the salinity dynamics of creeks, rivers, and estuaries. The location of the freshwater–saltwater interface along the coast is an important factor in the ecological and socioeconomic dynamics of coastal communities. Salinity is a critical response variable that integrates hydrologic and coastal dynamics including sea level, tides, winds, precipitation, streamflow, and tropical storms. The position of the interface determines the composition of freshwater and saltwater aquatic communities as well as the freshwater availability for water intakes. Many definitions of drought have been proposed, with most describing a decline in precipitation having negative impacts on the water supply. Indices have been developed incorporating data such as rainfall, streamflow, soil moisture, and groundwater levels. These water-availability drought indices were developed for upland areas and may not be ideal for characterizing coastal drought. The availability of real-time and historical salinity datasets provides an opportunity for the development of a salinity-based coastal drought index. An approach similar to the standardized precipitation index (SPI) was modified and applied to salinity data obtained from sites in South Carolina and Georgia. Using the SPI approach, the index becomes a coastal salinity index (CSI) that characterizes coastal salinity conditions with respect to drought periods of higher-saline conditions and wet periods of higher-freshwater conditions. Evaluation of the CSI indicates that it provides additional coastal response information as compared to the SPI and the Palmer hydrologic drought index, and the CSI can be used for different estuary types and for comparison of conditions along coastlines.

Aerobic composting of digested residue eluted from dry methane fermentation to develop a zero-emission process.

Science.gov (United States)

Huang, Yu-Lian; Sun, Zhao-Yong; Zhong, Xiao-Zhong; Wang, Ting-Ting; Tan, Li; Tang, Yue-Qin; Kida, Kenji

2017-03-01

Digested residue remained at the end of a process for the production of fuel ethanol and methane from kitchen garbage. To develop a zero-emission process, the compostability of the digested residue was assessed to obtain an added-value fertilizer. Composting of the digested residue by adding matured compost and a bulking agent was performed using a lab-scale composting reactor. The composting process showed that volatile total solid (VTS) degradation mainly occurred during the first 13days, and the highest VTS degradation efficiency was about 27% at the end. The raw material was not suitable as a fertilizer due to its high NH 4 + and volatile fatty acids (VFAs) concentration. However, the composting process produced remarkable results; the physicochemical properties indicated that highly matured compost was obtained within 62days of the composting process, and the final N concentration, NO 3 - concentration, and the germination index (GI) at the end of the composting process was 16.4gkg -1 -TS, 9.7gkg -1 -TS, and 151%, respectively. Real-time quantitative PCR (qPCR) analysis of ammonia oxidizers indicated that the occurrence of nitrification during the composting of digested residue was attributed to the activity of ammonia-oxidizing bacteria (AOB). Copyright © 2017 Elsevier Ltd. All rights reserved.

Analysis of Supply Chain Risk Management Strategies: Case Study of Supply Chain Disruptions

OpenAIRE

Marcelo Dias Carvalho; Leticia Ishikawa

2016-01-01

Supply Chain Risk Management refers to a set of strategies used by companies to avoid supply chain disruption caused by damage at production facilities, natural disasters, capacity issues, inventory problems, incorrect forecasts, and delays. Many companies use the techniques of the Toyota Production System, which in a way goes against a better management of supply chain risks. This paper studies key events in some multinationals to analyze the trade-off between the best supply chain risk mana...

Editorial: Supply Chain Management

Directory of Open Access Journals (Sweden)

Dimitrios Aidonis

2017-05-01

Full Text Available This special issue has followed up the 3rd Olympus International Conference on Supply Chains held on Athens Metropolitan Expo, November 7 & 8 2015, Greece. The Conference was organized by the Department of Logistics Technological Educational Institute of Central Macedonia, in collaboration with the: a Laboratory of Quantitative Analysis, Logistics and Supply Chain Management of the Department of Mechanical Engineering, Aristotle University of Thessaloniki (AUTH, b Greek Association of Supply Chain Management (EEL of Northern Greece and the c Supply Chain & Logistics Journal. During the 2-Days Conference more than 60 research papers were presented covering the following thematic areas: (i Transportation, (ii Best Practices in Logistics, (iii Information and Communication Technologies in Supply Chain Management, (iv Food Logistics, (v New Trends in Business Logistics, and (vi Green Supply Chain Management. Three keynote invited speakers addressed interesting issues for the Operational Research, the Opportunities and Prospects of Greek Ports chaired Round Tables with other Greek and Foreign Scientists and Specialists.

Nuclear fusion power supply device

International Nuclear Information System (INIS)

Nakagawa, Satoshi.

1975-01-01

Object: To use a hybrid power supply device, which comprises a thyristor power supply and a diode power supply, to decrease cost of a nuclear fusion power supply device. Structure: The device comprises a thyristor power supply connected through a closing unit and a diode power supply connected in parallel through a breaker, input of each power supply being applied with an output voltage of a flywheel AC generator. When a current transformer is excited, a disconnecting switch is turned on to close the diode power supply and a current of the current transformer is increased by an automatic voltage regulator to a set value within a predetermined period of time. Next, the current is cut off by a breaker, and when the breaker is in on position, the disconnecting switch is opened to turn on the closing unit. Thus, when a plasma electric current reaches a predetermined value, the breaker is turned on, and the current of the current transformer is controlled by the thyristor power supply. (Kamimura, M.)

The design of supply chains

OpenAIRE

Bøge Sørensen, Lars

2004-01-01

Keywords Supply Chain Management, Supply Chain Design, Literature study Abstract Argues stability is a design objective for supply chain design alongside cost, lead time and responsiveness. Performs an extensive literature study on supply chain design, identifies methods, theories and objectives in the existing literature. Describes the concept external specificity and how it’s used to design supply chains. Using the concept upstream, archetypes of risk minimal and maximal desi...

Mediating Dynamic Supply Chain Formation by Collaborative Single Machine Earliness/Tardiness Agents in Supply Mesh

Directory of Open Access Journals (Sweden)

Hang Yang

2014-01-01

Full Text Available Nowadays, a trend of forming dynamic supply chains with different trading partners over different e-marketplaces has emerged. These supply chains, which are called “supply mesh,” generally refer to heterogeneous electronic marketplaces in which dynamic supply chains, as per project (often make-to-order, are formed across different parties. Conceptually, in a supply mesh a dynamic supply chain is formed vertically, mediating several companies for a project. Companies that are on the same level horizontally are either competitors or cohorts. A complex scenario such as this makes it challenging to find the right group of members for a dynamic supply chain. Earlier on, a multiagent model called the collaborative single machine earliness/tardiness (CSET model was proposed for the optimal formation of make-to-order supply chains. This paper contributes the particular agent designs, for enabling the mediation of CSET in a supply mesh, and the possibilities are discussed. It is demonstrated via a computer simulation, based on samples from the U.S. textile industry, that by using intelligent agents under the CSET model it is possible to automatically find an ideal group of trading partners from a supply mesh.

The effects of location, feedstock availability, and supply-chain logistics on the greenhouse gas emissions of forest-biomass energy utilization in Finland

Energy Technology Data Exchange (ETDEWEB)

Jappinen, E,

2013-11-01

Forest biomass represents a geographically distributed feedstock, and geographical location affects the greenhouse gas (GHG) performance of a given forest-bioenergy system in several ways. For example, biomass availability, forest operations, transportation possibilities and the distances involved, biomass end-use possibilities, fossil reference systems, and forest carbon balances all depend to some extent on location. The overall objective of this thesis was to assess the GHG emissions derived from supply and energy-utilization chains of forest biomass in Finland, with a specific focus on the effect of location in relation to forest biomass's availability and the transportation possibilities. Biomass availability and transportation-network assessments were conducted through utilization of geographical information system methods, and the GHG emissions were assessed by means of lifecycle assessment. The thesis is based on four papers in which forest biomass supply on industrial scale was assessed. The feedstocks assessed in this thesis include harvesting residues, smalldiameter energy wood and stumps. The principal implication of the findings in this thesis is that in Finland, the location and availability of biomass in the proximity of a given energyutilization or energy-conversion plant is not a decisive factor in supply-chain GHG emissions or the possible GHG savings to be achieved with forest-biomass energy use. Therefore, for the greatest GHG reductions with limited forest-biomass resources, energy utilization of forest biomass in Finland should be directed to the locations where most GHG savings are achieved through replacement of fossil fuels. Furthermore, one should prioritize the types of forest biomass with the lowest direct supply-chain GHG emissions (e.g., from transport and comminution) and the lowest indirect ones (in particular, soil carbon-stock losses), regardless of location. In this respect, the best combination is to use harvesting residues

Synergy between the Multiple Supply Chain and Green Supply Chain Management (GSCM) approaches: an initial analysis aimed at fostering supply chain sustainability

OpenAIRE

Ana Lima de Carvalho; Livia Rodrigues Ignácio; Kleber Francisco Esposto; Aldo Roberto Ometto

2016-01-01

The concept of Green Supply Chain Management (GSCM) was created in the 90s to reduce the environmental impacts of productive systems. This approach seeks to improve the environmental performance of all the participants in a supply chain, from the extraction of raw materials to the use and final disposal of the product, through relationships of collaboration or conformity between the parties. The multiple supply chains approach established by Gattorna (2009) brought to light different supply c...

Methodological Adjust the Water Scarcity Index, Proposed by the IDEAM in the Plan of Arrangement and Management of the Basin of Pamplonita River - Norte de Santander, Colombia

International Nuclear Information System (INIS)

Infante Romero, Hebert Augusto; Ortiz, Luis Fernando

2008-01-01

A methodological adjustment was made to shortage index calculation taking the Pamplonita river case, which is incorporated as a management tool in watershed management plans using the guide published by the Institute of Hydrology, Meteorology and Environmental Studies -IDEAM. The objective was to improve the standard resolution of the information to make it more reliable in water supply and water demand for various uses, which in combination related to shortage index will become a technical-scientific decision-making element on water management within the framework of watershed management. The result gave the highest reliability on estimated municipal shortage index and demonstrated the urgent need to plan the supply of various demands, because more than 80% of the population of the basin is in a shortage of high rank in a typical year.