Scientific production of residence in the management of nursing services 2006 2011

Directory of Open Access Journals (Sweden)

Camila Severi Zanoni

2015-03-01

Full Text Available Retrospective, descriptive, documentary and quantitative study conducted to describe the scientific production of the Housing Management Services Nursing, University Hospital of Londrina State University, from 2006 to 2011. Information was collected by an instrument that identified the title, author, journal and classification in QUALIS / Coordination of Improvement of Higher Education Personnel of the articles produced. We analyzed 69 articles, 43.5% were published, 31.9% underwent the editorial board, 4.3% in the press, 14.5% resubmitted after rejection in the 1st submission and 5.8% are awaiting submission. There was a predominance of submission to journals B1 (44.6%. Of the 96 studies, 15 were presented at regional events in 60 national and 21 international, and 93.7% as a poster and nine received awards. The complexity of the health field and the demands of the labor market show the importance of research in nursing developed during the residency as enabler of reflection and transformation of professional practice.

A framework for product description classification in e-commerce

NARCIS (Netherlands)

Vandic, D.; Frasincar, F.; Kaymak, U.

We propose the Hierarchical Product Classification (HPC) framework for the purpose of classifying products using a hierarchical product taxonomy. The framework uses a classification system with multiple classification nodes, each residing on a different level of the taxonomy. The innovative part of

Marketing research of consumer preferences in juice products market in Kemerovo

Directory of Open Access Journals (Sweden)

T. F. Kiseleva

2017-01-01

Full Text Available In this paper, studies on juice products market in Kemerovo, preferences of Kemerovo residents buying juice products were conducted. With the help of the data obtained, the characteristics of juice products market in Kemerovo with the identification of the main suppliers of products were given. The object of the study in thiswork was the residents of Kemerovo. The purpose of the work was to study juice products market in Kemerovo, to investigate the preferences of Kemerovo residents buying juice products. The objectives of this work werethe following: characteristics of juice products market in Kemerovo, determining of the potential of the juice products market, analysis of the division of the market between producers, processing of the data obtained concerning the state of the juice products market in Kemerovo. The survey method was used to study the goals. Questioning is a method of collecting primary material in the form of a written survey of a large number of respondents to collect information on the state of certain aspects of the process under study. The questionnaire can cover a wide range of people, which makes it possible to minimize atypical manifestations, while personal contact with the respondent is not necessary. Another important advantage of the method is the convenience of performing mathematical processing of questionnaires. According to the processed questionnaires, advice of recommendation character, which is not mandatory for use, was given to the producers of juice products. Taking these recommendations into account, the manufacturer will be able to determine the characteristic and inherent features of the juice market in Kemerovo. Kemerovo residents were asked to answer a number of questions. The survey was conducted anonymously. The answers are informative and will be used for further study.

Determinants of Research Productivity in Spanish Academia

Science.gov (United States)

Albert, Cecilia; Davia, María A.; Legazpe, Nuria

2016-01-01

This article aims to widen the empirical evidence about the determinants of Spanish academics' publication productivity across fields of study. We use the Spanish Survey on Human Resources in Science and Technology addressed to Spanish resident PhDs employed in Spanish universities as academics. Productivity is measured as the total number of…

A COMBINED REACTION/PRODUCT RECOVERY PROCESS FOR THE CONTINUOUS PRODUCTION OF BIODIESEL

International Nuclear Information System (INIS)

Birdwell, J.F. Jr.; McFarlane, J.; Schuh, D.L.; Tsouris, C.; Day, J.N.; Hullette, J.N.

2009-01-01

Oak Ridge National Laboratory (ORNL) and Nu-Energie, LLC entered into a Cooperative Research And Development Agreement (CRADA) for the purpose of demonstrating and deploying a novel technology for the continuous synthesis and recovery of biodiesel from the transesterification of triglycerides. The focus of the work was the demonstration of a combination Couette reactor and centrifugal separator - an invention of ORNL researchers - that facilitates both product synthesis and recovery from reaction byproducts in the same apparatus. At present, transesterification of triglycerides to produce biodiesel is performed in batch-type reactors with an excess of a chemical catalyst, which is required to achieve high reactant conversions in reasonable reaction times (e.g., 1 hour). The need for long reactor residence times requires use of large reactors and ancillary equipment (e.g., feed and product tankage), and correspondingly large facilities, in order to obtain the economy of scale required to make the process economically viable. Hence, the goal of this CRADA was to demonstrate successful, extended operation of a laboratory-scale reactor/separator prototype to process typical industrial reactant materials, and to design, fabricate, and test a production-scale unit for deployment at the biodiesel production site. Because of its ease of operation, rapid attainment of steady state, high mass transfer and phase separation efficiencies, and compact size, a centrifugal contactor was chosen for intensification of the biodiesel production process. The unit was modified to increase the residence time from a few seconds to minutes*. For this application, liquid phases were introduced into the reactor as separate streams. One was composed of the methanol and base catalyst and the other was the soy oil used in the experiments. Following reaction in the mixing zone, the immiscible glycerine and methyl ester products were separated in the high speed rotor and collected from separate

A COMBINED REACTION/PRODUCT RECOVERY PROCESS FOR THE CONTINUOUS PRODUCTION OF BIODIESEL

Energy Technology Data Exchange (ETDEWEB)

Birdwell, J.F., Jr.; McFarlane, J.; Schuh, D.L.; Tsouris, C; Day, J.N. (Nu-Energie, LLC); Hullette, J.N. (Nu-Energie, LLC)

2009-09-01

Oak Ridge National Laboratory (ORNL) and Nu-Energie, LLC entered into a Cooperative Research And Development Agreement (CRADA) for the purpose of demonstrating and deploying a novel technology for the continuous synthesis and recovery of biodiesel from the transesterification of triglycerides. The focus of the work was the demonstration of a combination Couette reactor and centrifugal separator - an invention of ORNL researchers - that facilitates both product synthesis and recovery from reaction byproducts in the same apparatus. At present, transesterification of triglycerides to produce biodiesel is performed in batch-type reactors with an excess of a chemical catalyst, which is required to achieve high reactant conversions in reasonable reaction times (e.g., 1 hour). The need for long reactor residence times requires use of large reactors and ancillary equipment (e.g., feed and product tankage), and correspondingly large facilities, in order to obtain the economy of scale required to make the process economically viable. Hence, the goal of this CRADA was to demonstrate successful, extended operation of a laboratory-scale reactor/separator prototype to process typical industrial reactant materials, and to design, fabricate, and test a production-scale unit for deployment at the biodiesel production site. Because of its ease of operation, rapid attainment of steady state, high mass transfer and phase separation efficiencies, and compact size, a centrifugal contactor was chosen for intensification of the biodiesel production process. The unit was modified to increase the residence time from a few seconds to minutes*. For this application, liquid phases were introduced into the reactor as separate streams. One was composed of the methanol and base catalyst and the other was the soy oil used in the experiments. Following reaction in the mixing zone, the immiscible glycerine and methyl ester products were separated in the high speed rotor and collected from separate

Impact of the Accreditation Council for Graduate Medical Education work-hour regulations on neurosurgical resident education and productivity.

Science.gov (United States)

Jagannathan, Jay; Vates, G Edward; Pouratian, Nader; Sheehan, Jason P; Patrie, James; Grady, M Sean; Jane, John A

2009-05-01

Recently, the Institute of Medicine examined resident duty hours and their impact on patient safety. Experts have suggested that reducing resident work hours to 56 hours per week would further decrease medical errors. Although some reports have indicated that cutbacks in resident duty hours reduce errors and make resident life safer, few authors have specifically analyzed the effect of the Accreditation Council for Graduate Medical Education (ACGME) duty-hour limits on neurosurgical resident education and the perceived quality of training. The authors have evaluated multiple objective surrogate markers of resident performance and quality of training to determine the impact of the 80-hour workweek. The United States Medical Licensing Examination (USMLE) Step 1 data on neurosurgical applicants entering ACGME-accredited programs between 1998 and 2007 (before and after the implementation of the work-hour rules) were obtained from the Society of Neurological Surgeons. The American Board of Neurological Surgery (ABNS) written examination scores for this group of residents were also acquired. Resident registration for and presentations at the American Association of Neurological Surgeons (AANS) annual meetings between 2002 and 2007 were examined as a measure of resident academic productivity. As a case example, the authors analyzed the distribution of resident training hours in the University of Virginia (UVA) neurosurgical training program before and after the institution of the 80-hour workweek. Finally, program directors and chief residents in ACGME-accredited programs were surveyed regarding the effects of the 80-hour workweek on patient care, resident training, surgical experience, patient safety, and patient access to quality care. Respondents were also queried about their perceptions of a 56-hour workweek. Despite stable mean USMLE Step 1 scores for matched applicants to neurosurgery programs between 2000 and 2008, ABNS written examination scores for residents

Control in indoor radon decay products by air treatment devices

International Nuclear Information System (INIS)

Hinds, W.C.; Rudnick, S.N.; Maher, E.F.; First, M.W.

1983-01-01

An evaluation of the efficacy of household air cleaning devices as a means to control radon decay products in existing buildings is presented. Previous research on air cleaning methods for airborne radon decay products has been directed primarily to the control of radon decay products in mines and has only limited application to control in residences where dust concentration, air change rate, and humidity are lower than in mines. Results show that room size air cleaners can achieve substantial reductions in working levels in residences. Reductions observed at air infiltration rates of 0.52 air changes per hour ranged from 58 to 89%. Although the two air cleaners tested produced the greatest reductions, the low cost, simplicity, and other benefits of air circulating fans, particularly the ceiling fan, appear to make them most suitable for residences

Methods For Calculating Thyroid Doses to The Residents Of Ozersk Due to 131I Releases From The Stacks of The Mayak Production Association

Energy Technology Data Exchange (ETDEWEB)

Rovny, Sergey I.; Mokrov, Y.; Stukalov, Pavel M.; Beregich, D. A.; Teplyakov, I. I.; Anspaugh, L. R.; Napier, Bruce A.

2009-10-23

The Mayak Production Association (MPA) was established in the late 1940s in accordance with a special Decree of the USSR Government for the production of nuclear weapons. In early years of MPA operation, due to the lack of experience and absence of effective methods of RW management, the enterprise had extensive routine (designed) and non-routine (accidental) releases of gaseous radioactive wastes to the atmosphere. These practices resulted in additional technogenic radiation exposure of residents inhabiting populated areas near the MPA. The primary objective of ongoing studies under JCCRER Project 1.4 is to estimate doses to the residents of Ozersk due to releases of radioactive substances from the stacks of MPA. Preliminary scoping studies have demonstrated that releases of radioactive iodine (131I) from the stacks of the Mayak Radiochemical Plant represented the major contribution to the dose to residents of Ozersk and of other nearby populated areas. The behavior of 131I in the environment and of 131I migration through biological food chains (vegetation-cows-milk-humans) indicated a need for use of special mathematical models to perform the estimation of radiation doses to the population. The goal of this work is to select an appropriate model of the iodine migration in biological food chains and to justify numerical values of the model parameters.

Is there a future for enzymatic biodiesel industrial production in microreactors?

NARCIS (Netherlands)

Budzaki, S.; Miljic, G.; Tisma, M.; Sundaram, S.; Hessel, V.

The main problems of the conventional biodiesel production technology are high production costs and energy consumption, long residence time, and low efficiency. In order to overcome those problems and to improve the biodiesel production process from the ecological and economical points of view,

Weaner production with low antimicrobial usage: a descriptive study

DEFF Research Database (Denmark)

Fertner, Mette Ely; Boklund, Anette; Dupont, Nana Hee

2015-01-01

Background: Health, productivity and antimicrobial use in the production of pigs are expected to be interrelated to some extent. Previous studies on register-based data have investigated these correlations with a subsequent large variation residing at the farm level. In order to study such farm f...

A theory-informed, process-oriented Resident Scholarship Program.

Science.gov (United States)

Thammasitboon, Satid; Darby, John B; Hair, Amy B; Rose, Karen M; Ward, Mark A; Turner, Teri L; Balmer, Dorene F

2016-01-01

The Accreditation Council for Graduate Medical Education requires residency programs to provide curricula for residents to engage in scholarly activities but does not specify particular guidelines for instruction. We propose a Resident Scholarship Program that is framed by the self-determination theory (SDT) and emphasize the process of scholarly activity versus a scholarly product. The authors report on their longitudinal Resident Scholarship Program, which aimed to support psychological needs central to SDT: autonomy, competence, and relatedness. By addressing those needs in program aims and program components, the program may foster residents' intrinsic motivation to learn and to engage in scholarly activity. To this end, residents' engagement in scholarly processes, and changes in perceived autonomy, competence, and relatedness were assessed. Residents engaged in a range of scholarly projects and expressed positive regard for the program. Compared to before residency, residents felt more confident in the process of scholarly activity, as determined by changes in increased perceived autonomy, competence, and relatedness. Scholarly products were accomplished in return for a focus on scholarly process. Based on our experience, and in line with the SDT, supporting residents' autonomy, competence, and relatedness through a process-oriented scholarship program may foster the curiosity, inquisitiveness, and internal motivation to learn that drives scholarly activity and ultimately the production of scholarly products.

Thermal energy analysis of a lime production process: Rotary kiln, preheater and cooler

International Nuclear Information System (INIS)

Shahin, Hamed; Hassanpour, Saeid; Saboonchi, Ahmad

2016-01-01

Highlights: • The integrated model for lime production unit which includes cooler, preheater and rotary kiln is developed. • The effect of residence time in each section on efficiency is investigated. • Influence of material feed rate and excess air on specific fuel consumption is analyzed. • The significant effect of particle size on efficiency and specific fuel consumption is shown. - Abstract: In this paper, thermal energy analysis of three zones of a lime production process, which are preheater, rotary kiln and cooler, is performed. In order to perform a proper quantitative estimation, the system was modeled using energy balance equations including coupled heat transfer and chemical reaction mechanisms. A mathematical model was developed, and consequently, the thermal and chemical behavior of limestone was investigated. The model was verified using empirical data. After model confirmation, the variation of Specific Fuel Consumption (SFC) versus production rate was predicted and the optimum condition was determined. Subsequently, fuel consumption was calculated regarding to altered residence time inside each zone of lime production process, for a constant output. Results indicate that increasing the residence time inside each zone of lime production process, will enhance thermal efficiency and saves fuel consumption. Relative enhancement will be the same for different sizes of limestone. It was found that a 10-min increase in material residence time inside the preheater or rotary kiln can reduce fuel consumption by around two percent. Whereas, a 5-min increase in material residence time inside the cooler would be enough to obtain a similar result. Finally, the ratio of air-to-fuel and production rate are changed in such a way that the same product is achieved. The model predicts that lowering excess air from 15% to 10% leads to a 2.5% reduction of Specific Fuel Consumption (SFC).

Biomass pyrolysis/gasification for product gas production: the overall investigation of parametric effects

International Nuclear Information System (INIS)

Chen, G.; Andries, J.; Luo, Z.; Spliethoff, H.

2003-01-01

The conventional biomass pyrolysis/gasification process for production of medium heating value gas for industrial or civil applications faces two disadvantages, i.e. low gas productivity and the accompanying corrosion of downstream equipment caused by the high content of tar vapour contained in the gas phase. The objective of this paper is to overcome these disadvantages, and therefore, the effects of the operating parameters on biomass pyrolysis are investigated in a laboratory setup based on the principle of keeping the heating value of the gas almost unchanged. The studied parameters include reaction temperature, residence time of volatile phase in the reactor, physico-chemical pretreatment of biomass particles, heating rate of the external heating furnace and improvement of the heat and mass transfer ability of the pyrolysis reactor. The running temperature of a separate cracking reactor and the geometrical configuration of the pyrolysis reactor are also studied. However, due to time limits, different types of catalysts are not used in this work to determine their positive influences on biomass pyrolysis behaviour. The results indicate that product gas production from biomass pyrolysis is sensitive to the operating parameters mentioned above, and the product gas heating value is high, up to 13-15 MJ/N m 3

Xylitol production from rice husk using candida guilliermondii

International Nuclear Information System (INIS)

Villalba C Marcela; Velez U Tatiana; Arias Z, Mario; Arrazola P, Guillermo

2009-01-01

In this study was used rice husk, previously hydrolyzed with diluted sulfuric acid at 121 Celsius degrade C and 15 psig, with a residence time 60 min. The initial concentration of substrate, inoculum, and relationship between media volume/flask volume and their combined effects were studied on the production of xylitol. The initial concentrations of 80 g/l xylose and 5 g/l inoculum led the best xylitol production (45.2 g/l), productivity (0.23 g/loH) and yield (0.57 g/g).

Accounting for graduate medical education production of primary care physicians and general surgeons: timing of measurement matters.

Science.gov (United States)

Petterson, Stephen; Burke, Matthew; Phillips, Robert; Teevan, Bridget

2011-05-01

Legislation proposed in 2009 to expand GME set institutional primary care and general surgery production eligibility thresholds at 25% at entry into training. The authors measured institutions' production of primary care physicians and general surgeons on completion of first residency versus two to four years after graduation to inform debate and explore residency expansion and physician workforce implications. Production of primary care physicians and general surgeons was assessed by retrospective analysis of the 2009 American Medical Association Masterfile, which includes physicians' training institution, residency specialty, and year of completion for up to six training experiences. The authors measured production rates for each institution based on physicians completing their first residency during 2005-2007 in family or internal medicine, pediatrics, or general surgery. They then reassessed rates to account for those who completed additional training. They compared these rates with proposed expansion eligibility thresholds and current workforce needs. Of 116,004 physicians completing their first residency, 54,245 (46.8%) were in primary care and general surgery. Of 683 training institutions, 586 met the 25% threshold for expansion eligibility. At two to four years out, only 29,963 physicians (25.8%) remained in primary care or general surgery, and 135 institutions lost eligibility. A 35% threshold eliminated 314 institutions collectively training 93,774 residents (80.8%). Residency expansion thresholds that do not account for production at least two to four years after completion of first residency overestimate eligibility. The overall primary care production rate from GME will not sustain the current physician workforce composition. Copyright © by the Association of American medical Colleges.

Producing ammonium sulfate from flue gas desulfurization by-products

Science.gov (United States)

Chou, I.-Ming; Bruinius, J.A.; Benig, V.; Chou, S.-F.J.; Carty, R.H.

2005-01-01

Emission control technologies using flue gas desulfurization (FGD) have been widely adopted by utilities burning high-sulfur fuels. However, these technologies require additional equipment, greater operating expenses, and increased costs for landfill disposal of the solid by-products produced. The financial burdens would be reduced if successful high-volume commercial applications of the FGD solid by-products were developed. In this study, the technical feasibility of producing ammonium sulfate from FGD residues by allowing it to react with ammonium carbonate in an aqueous solution was preliminarily assessed. Reaction temperatures of 60, 70, and 80??C and residence times of 4 and 6 hours were tested to determine the optimal conversion condition and final product evaluations. High yields (up to 83%) of ammonium sulfate with up to 99% purity were achieved under relatively mild conditions. The optimal conversion condition was observed at 60??C and a 4-hour residence time. The results of this study indicate the technical feasibility of producing ammonium sulfate fertilizer from an FGD by-product. Copyright ?? Taylor & Francis Inc.

Product design - Molecules, devices, functional products, and formulated products

DEFF Research Database (Denmark)

Gani, Rafiqul; Ng, Ka M.

2015-01-01

Chemical product design is a multidisciplinary and diverse subject. This article provides an overview of product design while focusing on product conceptualization. Four product types are considered - molecular products, formulated products, devices and functional products. For molecular products......, computer-aided design tools are used to predict the physicochemical properties of single molecules and blends. For formulated products, an integrated experiment-modeling approach is used to generate the formula with the specified product attributes. For devices and functional products, conceptual product...... design is carried out by modeling the product based on thermodynamics, kinetics and transport processes, by performing experiments, and by decision making based on rule-based methods The results are product specifications in terms of the type of ingredients, composition, and the structure, form, shape...

Uranium production, exploration and mine development in Canada

International Nuclear Information System (INIS)

Vance, R. E

2006-01-01

Full text: Full text: Canada has been the world leader in uranium production since the early 1990's and production in 2005 was 11,629 te U. The Elliott Lake region of Ontario was once the centre of production, but after the last facilities closed in 1996, all production now comes from the Athabasca Basin in northern Saskatchewan. Average grades of the world's two largest high grade deposits at McArthur River and Cigar Lake are 10 to 100 times the grade of deposits mined elsewhere. McArthur River has been in production since late 1999 and first production from Cigar Lake is expected in 2007. If all expansion and probable mine openings come to fruition, annual Canadian production could amount to 16,000 te U by 2011. All currently operating uranium mines have been the subject of a comprehensive environmental assessment and review process. Uranium mining brings significant benefits to local area residents in northern Saskatchewan. Residents of northern Saskatchewan are active participants in Environmental Quality Committees. Recent survey results show the majority of Saskatchewan residents support the continuation of uranium mining in the province. The closed uranium mines in Canada have been successfully decommissioned and rehabilitated in particular in the Elliott Lake region of Ontario. The principle exploration target in Canada remains the Athabasca Basin, but activity has also been reported in several of the other territories and provinces. Natural Resources Canada estimates that some $CAN81M was spent on exploration in Canada in 2005. Under the Canadian Constitution, natural resources are owned by the provinces or by the federal government if they are on federal lands north of 60 0 C latitude. The provinces have jurisdiction over exploration activities within their borders and for most commodities have jurisdiction over mine development and production, operations, health and safety and environmental matters. Once a company starts to develop a deposit into a mine

Carcinogenic effect of petroleum and its by-products

Energy Technology Data Exchange (ETDEWEB)

Gimadeev, M M

1962-01-01

A review of literature on the carcinogenic effect of petroleum and its by-products are briefly discussed. Many of the products can induce hyperkeratosis, folliculitis, verruca, pulmonary adenoma, skin cancer, etc. Their action is mainly local but they can also be multicentric. Although a number of groups have made chemical analyses of various petroleums and peroleum products, results were generally negative with respect to 3,4-benzypyrene, although 40 to 68 microg/g was found in 1 crude petroleum. At present it appears that much of the carcinogenic action of these materials resides in polycyclic hydrocarbons about which little is known.

Invasive plants as feedstock for biochar and bioenergy production.

Science.gov (United States)

Liao, Rui; Gao, Bin; Fang, June

2013-07-01

In this work, the potential of invasive plant species as feedstock for value-added products (biochar and bioenergy) through pyrolysis was investigated. The product yield rates of two major invasive species in the US, Brazilian Pepper (BP) and Air Potato (AP), were compared to that of two traditional feedstock materials, water oak and energy cane. Three pyrolysis temperatures (300, 450, and 600°C) and four feedstock masses (10, 15, 20, and 25 g) were tested for a total of 12 experimental conditions. AP had high biochar and low oil yields, while BP had a high oil yield. At lower temperatures, the minimum feedstock residence time for biochar and bioenergy production increased at a faster rate as feedstock weight increased than it did at higher temperatures. A simple mathematical model was successfully developed to describe the relationship between feedstock weight and the minimum residence time. Copyright © 2013 Elsevier Ltd. All rights reserved.

Purchase Intention of Foreign Products

Directory of Open Access Journals (Sweden)

Ahasanul Haque

2015-06-01

Full Text Available The current research aims to investigate various factors that influence consumers’ intention of buying foreign products. The data were collected by means of self-structured questionnaires from a total of 260 Bangladeshi consumers residing in the two major cities of the country, Dhaka and Chittagong. At the initial stage, statistical analyses, particularly descriptive analysis as well as exploratory factor analysis, were conducted using SPSS, after which structural equation modeling was run by using AMOS. The findings have established that brand image and quality of foreign products carry significant positive influence on purchase intention of foreign products. However, religiosity leaves a significant negative effect on the purchase intention of foreign products. Furthermore, findings have also revealed that the image of the country of origin carries a significant positive effect on brand image but ethnocentrism carries a significant negative effect on perceptions about the quality of foreign products in their purchase intention. The major contribution of the current study is that it focuses on Bangladesh, as there is a vacuum in contemporary literature on this topic in the context of Bangladeshi consumers. The findings derived from the study could facilitate marketers in the creation of effective marketing strategies and at the same time are also valuable for academicians as well as consumers at large.

A Prospective, Multicenter Study to Compare a Disposable, High-fluid Capacity Underpad to Nonpermeable, Disposable, Reusable Containment Products on Incontinence-associated Dermatitis Rates Among Skilled Nursing Facility Residents.

Science.gov (United States)

Motta, Glenda; Milne, Catherine T

2017-12-01

Due to the high prevalence of incontinence among skilled nursing facility (SNF) residents, incontinence-associated derma- titis (IAD) is a common occurrence. In addition, facility staff may mistakenly identify IAD as a pressure injury. A prospective, descriptive, multicenter study was conducted in 3 Connecticut facilities to evaluate the effect of substituting a disposable, high- uid capacity underpad for nonpermeable disposable and reusable containment products on the rate of IADs. Residents with and without IAD but with high IAD risk scores who were bed- or chairbound or ambulatory and used disposable nonpermeable briefs and underpads or reusable, laundered containment products when in bed longer than 2 hours were randomly enrolled and observed for a 4-week period. Facility staff were trained on the importance of differentiating between IAD and pressure injury; they substituted the study product (a disposable, high- uid capacity underpad) for all previously used containment products. Patient risk for IAD and skin condition were assessed using the Perineal Assessment Tool (PAT) and the Skin Condition Assessment Tool (SAT), respectively, at 5 time points: baseline, week 1, week 2, week 3, and week 4. The PAT is a 4-item instrument based conceptually on the 4 determinants in perineal skin breakdown; subscales are rated from 1 (least risk) to 3 (most risk), with a total score range of 4 to 12. The SAT is used to evaluate IAD speci cally, generating a cumulative severity score ranging from 0 to 3 on area of skin affected, degree of redness, and depth of ero- sion. Final data analysis was conducted on 40 residents: 25 had IAD present at enrollment and 15 were deemed high risk for developing IAD. Mean SAT scores in the 25 participants with IAD decreased with signi cance at week 1 (P = .0016), week 2 (P = .0023), week 3 (P = .0005), and week 4 (P disposable, high- uid capacity underpad improved SAT scores over time. IAD rates increased in each facility, but pressure

A theory-informed, process-oriented Resident Scholarship Program

Science.gov (United States)

Thammasitboon, Satid; Darby, John B.; Hair, Amy B.; Rose, Karen M.; Ward, Mark A.; Turner, Teri L.; Balmer, Dorene F.

2016-01-01

Background The Accreditation Council for Graduate Medical Education requires residency programs to provide curricula for residents to engage in scholarly activities but does not specify particular guidelines for instruction. We propose a Resident Scholarship Program that is framed by the self-determination theory (SDT) and emphasize the process of scholarly activity versus a scholarly product. Methods The authors report on their longitudinal Resident Scholarship Program, which aimed to support psychological needs central to SDT: autonomy, competence, and relatedness. By addressing those needs in program aims and program components, the program may foster residents’ intrinsic motivation to learn and to engage in scholarly activity. To this end, residents’ engagement in scholarly processes, and changes in perceived autonomy, competence, and relatedness were assessed. Results Residents engaged in a range of scholarly projects and expressed positive regard for the program. Compared to before residency, residents felt more confident in the process of scholarly activity, as determined by changes in increased perceived autonomy, competence, and relatedness. Scholarly products were accomplished in return for a focus on scholarly process. Conclusions Based on our experience, and in line with the SDT, supporting residents’ autonomy, competence, and relatedness through a process-oriented scholarship program may foster the curiosity, inquisitiveness, and internal motivation to learn that drives scholarly activity and ultimately the production of scholarly products. PMID:27306995

Microwave-assisted and carbonaceous catalytic pyrolysis of crude glycerol from biodiesel waste for energy production

International Nuclear Information System (INIS)

Ng, Jo-Han; Leong, Swee Kim; Lam, Su Shiung; Ani, Farid Nasir; Chong, Cheng Tung

2017-01-01

Highlights: • Crude glycerol is pyrolysed catalytically via microwave irradiation to produce bioenergy. • Carbonaceous catalyst elevates pyrolysis temperature and promotes selectivity towards H_2 production. • Synthesis gas consisting of mainly H_2 and CH_4 was predominantly produced at long residence time and high temperature. • Production of bio-oil consisting of oxygenated compounds peaks at intermediate carrier gas flow rate. • Energy profit analysis shows positive energy gained with increasing residence time and decreasing reaction temperature. - Abstract: Biodiesel proliferation as a sustainable fuel has led to a glut of crude glycerol as co-product. This scenario made a previously lucrative co-product in the food and pharmaceutical sectors into a bioresource waste. The present study investigates the utilisation of a microwave-assisted pyrolysis technique to convert crude glycerol from biodiesel waste into usable bioenergy source. Operating conditions ranged from a temperature of 300–800 °C at carrier gas flow rates of 100–2000 mL/min, with the effects of carbonaceous catalyst on the selectivity of reaction pathway being investigated. Within the aforementioned conditions, the proportion of products phases is mainly dependent on the residence time inside the quartz reactor, followed by the reaction temperature. This is due to the combined factors of the reaction sequence and provision of activation energy to change product phases. The third factor of carbonaceous catalyst shows a predisposition towards hydrogen gas selectivity, leading to a lower overall gaseous product mass when factoring in products from all phases. An analysis of the energy content revealed that overall energy profit increases with decreasing temperature and increasing residence time. This concurs with solid energy content increasing in the same conditions, while it increases for liquid and gaseous products with decreasing temperature and flow rate, respectively. The

Electron irradiation of dry food products

Energy Technology Data Exchange (ETDEWEB)

Gruenewald, Th [Bundesbahn-Zentralamt, Minden (Germany, F.R.)

1983-01-01

The interest of the industrial food producer is increasing in having the irradiation facility installed in the food processing chain. The throughput of the irradiator should be high and the residence time of the product in the facility should be short. These conditions can be accomplished by electron irradiators. To clarify the irradiation conditions spices taken out of the industrial process, food grade salt, sugar, and gums as models of dry food products were irradiated. With a radiation dose of 10 kGy microbial load can be reduced on 10**4 microorganisms/g. The sensory properties of the spices were not changed in an atypical way. For food grade salt and sugar changes of colour were observed which are due to lattice defects or initiated browning. The irradiation of several gums led only in some cases to an improvement of the thickness properties in the application below 50 deg C, in most cases the thickness effect was reduced. The products were packaged before irradiation. But it would be possible also to irradiate the products without packaging moving the product through the irradiation field in a closed conveyor system.

Electron irradiation of dry food products

International Nuclear Information System (INIS)

Gruenewald, Th.

1983-01-01

The interest of the industrial food producer is increasing in having the irradiation facility installed in the food processing chain. The throughput of the irradiator should be high and the residence time of the product in the facility should be short. These conditions can be accomplished by electron irradiators. To clarify the irradiation conditions spices taken out of the industrial process, food grade salt, sugar, and gums as models of dry food products were irradiated. With a radiation dose of 10 kGy microbial load can be reduced on 10**4 microorganisms/g. The sensory properties of the spices were not changed in an atypical way. For food grade salt and sugar changes of colour were observed which are due to lattice defects or initiated browning. The irradiation of several gums led only in some cases to an improvement of the thickness properties in the application below 50 deg C, in most cases the thickness effect was reduced. The products were packaged before irradiation. But it would be possible also to irradiate the products without packaging moving the product through the irradiation field in a closed conveyor system. (author)

Determinants of Organic Products Consumption

Directory of Open Access Journals (Sweden)

Matheus Wemerson Gomes Pereira

2015-04-01

Full Text Available The increased environmental awareness and the growing desire for safer foods to health made the organic products category one of the most growing in the food sector. Thus, this study aimed to identify the most significant socioeconomic variables that influence the frequency of organic products consumption, and for that, it was based on a quantitative-descriptive study with a probability sample of 400 individuals, residing of the urban area of Campo Grande/MS, Brazil, responsible, alone or not, for food purchasing in family. As a tool for data collection, was used a structured questionnaire developed from socioeconomic variables and frequency of consumption of organic products. For the data analysis was performed statistical/econometric tests with the STATA 11.0 statistical software, using Multinomial Logit model (MNL, addition to verification of the explanatory variables effect on the probability of the consumption frequency levels of organic products through the Relative Risk Ratio (RRR, and was analyzed the Marginal Effect (ME exercised by the explanatory variables in each frequency level of organic products consumption. The results showed that the explanatory variables gender, education and economic class were statistically significant in the probability of an individual belong to some of the levels of consumption (rare, occasional and frequent over never having consumed organic products, being higher frequency of consumption when the consumer is female, have higher education or is of higher economic class.

Dilute acid pretreatment of rye straw and bermudagrass for ethanol production

Energy Technology Data Exchange (ETDEWEB)

Ye Sun; Jay J Cheng [North Carolina State Univ., Dept. of Biological and Agricultural Engineering, Raleigh, NC (United States)

2005-09-01

Ethanol production from lignocellulosic materials provides an alternative energy production system. Rye and bermudagrass that are used in hog farms for nutrient uptake from swine wastewater have the potential for fuel ethanol production because they have a relative high cellulose and hemicellulose content. Dilute sulfuric acid pretreatment of rye straw and bermudagrass before enzymatic hydrolysis of cellulose was investigated in this study. The biomass at a solid loading rate of 10% was pretreated at 121 deg C with different sulfuric acid concentrations (0.6, 0.9, 1.2 and 1.5%, w/w) and residence times (30, 60, and 90 min). Total reducing sugars, arabinose, galactose, glucose, and xylose in the prehydrolyzate were analyzed. In addition, the solid residues were hydrolyzed by cellulases to investigate the enzymatic digestibility. With the increasing acid concentration and residence time, the amount of arabinose and galactose in the filtrates increased. The glucose concentration in the prehydrolyzate of rye straw was not significantly influenced by the sulfuric acid concentration and residence time, but it increased in the prehydrolyzate of bermudagrass with the increase of pretreatment severity. The xylose concentration in the filtrates increased with the increase of sulfuric acid concentration and residence time. Most of the arabinan, galactan and xylan in the biomass were hydrolyzed during the acid pretreatment. Cellulose remaining in the pretreated feedstock was highly digestible by cellulases from Trichoderma reesei. (Author)

Use of tower reactors for continuous ethanol production

Directory of Open Access Journals (Sweden)

M.C. Viegas

2002-04-01

Full Text Available The purpose of this work was to develop a continuous fermentation system operating with a tower reactor using some flocculent yeast strains isolated from an industrial process. The strain was an used in the trial of the proposed system, composed of two serial glass tower reactor. The effects of the following variables were studied on the yield and productivity of the system: total reducing sugar (TRS, concentration in feeding, recycle flow in the second reactor, residence time and diameter/height ratio of the reactors. It was observed that the TRS concentration in feeding and residence time is the variables that interfere most with the productivity of the system. Yield was not affected by any of the variables within the range of values studied. All trials were performed according to a factorial experimental design (making up a total of 19 trials and the results were evaluated by response surface.

Fetal programming in meat production.

Science.gov (United States)

Du, Min; Wang, Bo; Fu, Xing; Yang, Qiyuan; Zhu, Mei-Jun

2015-11-01

Nutrient fluctuations during the fetal stage affects fetal development, which has long-term impacts on the production efficiency and quality of meat. During the early development, a pool of mesenchymal progenitor cells proliferate and then diverge into either myogenic or adipogenic/fibrogenic lineages. Myogenic progenitor cells further develop into muscle fibers and satellite cells, while adipogenic/fibrogenic lineage cells develop into adipocytes, fibroblasts and resident fibro-adipogenic progenitor cells. Enhancing the proliferation and myogenic commitment of progenitor cells during fetal development enhances muscle growth and lean production in offspring. On the other hand, promoting the adipogenic differentiation of adipogenic/fibrogenic progenitor cells inside the muscle increases intramuscular adipocytes and reduces connective tissue, which improves meat marbling and tenderness. Available studies in mammalian livestock, including cattle, sheep and pigs, clearly show the link between maternal nutrition and the quantity and quality of meat production. Similarly, chicken muscle fibers develop before hatching and, thus, egg and yolk sizes and hatching temperature affect long-term growth performance and meat production of chicken. On the contrary, because fishes are able to generate new muscle fibers lifelong, the impact of early nutrition on fish growth performance is expected to be minor, which requires further studies. Copyright © 2015 Elsevier Ltd. All rights reserved.

Non-timber forest products in Central Appalachia: market opportunities for rural development (poster abstract)

Science.gov (United States)

A.L. Hammett; J.L. Chamberlain

1999-01-01

The gathering of forest products has supplemented the incomes of Central Appalachia residents for many generations. Non-timber forest products (NTFPs) can be grouped within four general categories: edibles such as mushrooms; medicinal and dietary supplements, including ginseng, gingko, and St. John?s wort; floral products such as moss, grape vines, and ferns; and...

Use of sanitizing products: safety practices and risk situations

Directory of Open Access Journals (Sweden)

Ana Aurélia Rocha da Silva

2014-04-01

Full Text Available OBJECTIVES: to evaluate the handling and risk factors for poisoning and/or digestive tract injuries associated with the use of sanitizing products at home. METHODS: interviews were conducted in 419 households from different regions, collecting epidemiological data from residents and risk habits related to the use and storage of cleaning products. RESULTS: sanitizing products considered to be a health risk were found in 98% of the households where the research was conducted, and in 54% of cases, they were stored in places easily accessible to children. Lye was found in 19%, followed by illicit products in 39% of homes. In 13% of households, people produced soap, and in 12% they stored products in non-original containers. The use of illicit products and the manufacture of handmade soap were associated with lower educational level of the household owners and with the regions and socioeconomic classes with lower purchasing power. CONCLUSIONS: risk practices such as inadequate storage, manufacturing, and use of sanitizing products by the population evidence the need for public health policies, including educational measures, as a means of preventing accidents.

Modelling Product Families for Product Configuration Systems with Product Variant Master

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

2010-01-01

This article presents an evaluation of applying a suggested method for modelling product families for product configuration based on theory for modelling mechanical products,systems theory and object-oriented modelling. The modelling technique includes a so-called product variant master and CRC-cards...... the three views. Modelling of characteristics of the product variants in a product family Modelling of constraints between parts in the product family Visualisation of the entire product family on a poster e.g. 1x2 meters The product variant master and CRC-cards are means to bridge the gap between domain...... experts and IT-developers, thus making it possible for the domain experts (e.g. engineers from product development) to express their knowledge in a form that is understandable both for the domain experts and the IT-developers. The product variant master and CRC-cards have currently been tested and further...

D-malate production by permeabilized Pseudomonas pseudoalcaligenes; optimization of conversion and biocatalyst productivity.

Science.gov (United States)

Michielsen, M J; Frielink, C; Wijffels, R H; Tramper, J; Beeftink, H H

2000-04-14

For the development of a continuous process for the production of solid D-malate from a Ca-maleate suspension by permeabilized Pseudomonas pseudoalcaligenes, it is important to understand the effect of appropriate process parameters on the stability and activity of the biocatalyst. Previously, we quantified the effect of product (D-malate2 -) concentration on both the first-order biocatalyst inactivation rate and on the biocatalytic conversion rate. The effects of the remaining process parameters (ionic strength, and substrate and Ca2 + concentration) on biocatalyst activity are reported here. At (common) ionic strengths below 2 M, biocatalyst activity was unaffected. At high substrate concentrations, inhibition occurred. Ca2+ concentration did not affect biocatalyst activity. The kinetic parameters (both for conversion and inactivation) were determined as a function of temperature by fitting the complete kinetic model, featuring substrate inhibition, competitive product inhibition and first-order irreversible biocatalyst inactivation, at different temperatures simultaneously through three extended data sets of substrate concentration versus time. Temperature affected both the conversion and inactivation parameters. The final model was used to calculate the substrate and biocatalyst costs per mmol of product in a continuous system with biocatalyst replenishment and biocatalyst recycling. Despite the effect of temperature on each kinetic parameter separately, the overall effect of temperature on the costs was found to be negligible (between 293 and 308 K). Within pertinent ranges, the sum of the substrate and biocatalyst costs per mmol of product was calculated to decrease with the influent substrate concentration and the residence time. The sum of the costs showed a minimum as a function of the influent biocatalyst concentration.

Sustainable bioenergy production from Missouri's Ozark forests

Science.gov (United States)

Henry E. Stelzer; Chris Barnett; Verel W. Bensen

2008-01-01

The main source of wood fiber for energy resides in Missouri's forests. Alternative bioenergy systems that can use forest thinning residues are electrical energy, thermal energy, and liquid bio-fuel. By applying a thinning rule and accounting for wood fiber that could go into higher value wood products to all live biomass data extracted from the U.S. Forest...

Production of Modularised Product Systems

DEFF Research Database (Denmark)

Jacobsen, Peter

2004-01-01

but a solution. Modularisation is one tool used in designing the products. Designing and controlling a production system making customized products in an economical way is not an easy task. In order to fulfil the Lean and Agile manufacturing philosophies the production is often carried out in networks. Here...

Process simulation and economic analysis of biodiesel production from waste cooking oil with membrane bioreactor

Science.gov (United States)

Abdurakhman, Yuanita Budiman; Putra, Zulfan Adi; Bilad, Muhammad Roil

2017-10-01

Pollution and shortage of clean energy supply are among major problems that are caused by rapid population growth. Due to this growth, waste cooking oil is one of the pollution sources. On the other hand, biodiesel appears to be one of the most promising and feasible energy sources as it emits less toxic pollutants and greenhouse gases than petroleum diesel. Thus, biodiesel production using waste cooking oil offers a two-in-one solution to cater pollution and energy issues. However, the conventional biodiesel production process using homogeneous base catalyst and stirred tank reactor is unable to produce high purity of biodiesel from waste cooking oil. It is due its sensitivity to free fatty acid (FFA) content in waste cooking oil and purification difficulties. Therefore, biodiesel production using heterogeneous acid catalyst in membrane reactor is suggested. The product of this process is fatty acid methyl esters (FAME) or biodiesel with glycerol as by-product. This project is aimed to study techno-economic feasibility of biodiesel production from waste cooking oil via heterogeneous acid catalyst in membrane reactor. Aspen HYSYS is used to accomplish this aim. Several cases, such as considering different residence times and the production of pharmaceutical (USP) grade glycerol, are evaluated and compared. Economic potential of these cases is calculated by considering capital expenditure, utilities cost, product and by-product sales, as well as raw material costs. Waste cooking oil, inorganic pressure-driven membrane and WAl is used as raw material, type of membrane and heterogeneous acid catalyst respectively. Based on literature data, FAME yield formulation is developed and used in the reactor simulation. Simulation results shows that economic potential increases by 30% if pharmaceutical (USP) grade glycerol is produced regardless the residence time of the reactor. In addition, there is no significant effect of residence time on the economic potential.

Life's Impact on the Soil Production Function

Science.gov (United States)

Harrison, Emma; Willenbring, Jane; Brocard, Gilles

2016-04-01

Soil melds life and lithology, but the top-down production of soil by the incorporation of organic matter has typically been viewed through a lens of soil biogeochemistry and the bottom-up weathering of bedrock viewed from a geomorphologic perspective. We merge these perspectives by developing a variation on the classic geomorphological soil production function [1] that accounts for the influence of top-down soil production by additions of organic material. In the classic view [1], production rate of soil from bedrock weathering is a function of the thickness of the soil horizon. Under steady state conditions, this thickness is controlled by a constant coefficient of diffusion and by the hillslope curvature. Across the globe, equilibrium landscapes can be hard to find. We explore the many ways that biota influence the upper soil horizons and move the soil-hillslope system out of steady state using measurements of in situ 10Be at depth in soil profiles. Our empirical case study is in the Luquillo Critical Zone Observatory of northeastern Puerto Rico, where long term ecological monitoring suggests an average of 375 m My-1 of litter fall [2] and as much as 17.5 m My-1 of dust [3] is contributed to the forest floor. This substantial volume of material forms an active surficial layer, functionally increasing the residence time of grains deeper in the soil profile. Litter recycling influences the cosmogenic dose rate to be higher by increasing the residence time of grains and to be lower by increasing environmental shielding. In unconstrained systems, probabilistic modeling can determine a range of solutions for the ages of grains determined with 10Be depth profiles[4]. We compare the probabilistic outcomes to actual measurements of the in situ 10Be at depth in soil profiles from the Luquillo Mountains. Life living in the soil, rather than on it, is of equal importance in the Luquillo Mountains. On average, the soil is occupied by 200 individual earthworms per m2 [5

Electrolytic production of uranous nitrate

International Nuclear Information System (INIS)

Orebaugh, E.G.; Propst, R.C.

1980-04-01

Efficient production of uranous nitrate is important in nuclear fuel reprocessing because U(IV) acts as a plutonium reductant in solvent extraction and can be coprecipitated with plutonium and/or throium as oxalates during fuel reprocessing. Experimental conditions are described for the efficient electrolytic production of uranous nitrate for use as a reductant in the SRP Purex process. The bench-scale, continuous-flow, electrolysis cell exhibits a current efficiency approaching 100% in combination with high conversion rates of U(VI) to U(IV) in simulated and actual SRP Purex solutions. High current efficiency is achieved with a voltage-controlled mercury-plated platinum electrode and the use of hydrazine as a nitrite scavenger. Conversion of U(VI) to U(IV) proceeds at 100% efficiency. Cathodic gas generation is minimal. The low rate of gas generation permits a long residence time within the cathode, a necessary condition for high conversions on a continuous basis. Design proposals are given for a plant-scale, continuous-flow unit to meet SRP production requirements. Results from the bench-scale tests indicate that an 8-kW unit can supply sufficient uranous nitrate reductant to meet the needs of the Purex process at SRP

Practical Applications for Maintenance of Certification Products in Child and Adolescent Residency Training.

Science.gov (United States)

Williams, Laurel L; Sexson, Sandra; Dingle, Arden D; Young-Walker, Laine; John, Nadyah; Hunt, Jeffrey

2016-04-01

The authors evaluated whether Maintenance of Certification (MOC) Performance-in-Practice products in training increases trainee knowledge of MOC processes and is viewed by trainees as a useful activity. Six child and adolescent psychiatry fellowships used MOC products in continuity clinics to assess their usefulness as training tools. Two surveys assessed initial knowledge of MOC and usefulness of the activity. Forty-one fellows completed the initial survey. A majority of first-year fellows indicated lack of awareness of MOC in contrast to a majority of second-year fellows who indicated some awareness. Thirty-five fellows completed the second survey. A majority of first- and second-year fellows found the activity easy to execute and would change something about their practice as a result. Using MOC products in training appears to be a useful activity that may assist training programs in teaching the principles of self- and peer-learning.

New risk indicator approach for Operators, Workers, Bystanders and Residents for a sustainable use of plant protection products.

Science.gov (United States)

Sacchettini, Gabriele; Calliera, Maura; Marchis, Alexandru; Glass, Richard; Ellis, Clare Butler; Machera, Kyriaki; Gerritsen-Ebben, Rianda; Spanoghe, Pieter; Capri, Ettore

2015-11-01

In 2009, the European Union adopted the Directive on Sustainable Use of pesticides (SUD, Directive 2009/128/EC) establishing a framework for achieving a sustainable use of Plant Protection Products (PPPs) through reducing the risks and impacts of PPP use on human health and the environment, promoting integrated pest management and stimulating effective non-chemical alternatives. The core idea of the SUD is that it is necessary to monitor the use of PPPs through the implementation of an appropriate set of risk indicators to monitor progress and trends in risk reduction within the Member States. To contribute to this direction, following a comprehensive analysis of the risk (including procedures of risk assessment and risk management) and involving stakeholders in the decision process, specific toolboxes of practical indirect risk indicators of exposure of Operators, Workers, Bystanders and Residents were developed and are now available to be used by Member States (MSs) based on their specific context.

Nonthermal gravitino production in tribrid inflation

Science.gov (United States)

Antusch, Stefan; Dutta, Koushik

2015-10-01

We investigate nonthermal gravitino production after tribrid inflation in supergravity, which is a variant of supersymmetric hybrid inflation where three fields are involved in the inflationary model and where the inflaton field resides in the matter sector of the theory. In contrast to conventional supersymmetric hybrid inflation, where nonthermal gravitino production imposes severe constraints on the inflationary model, we find that the "nonthermal gravitino problem" is generically absent in models of tribrid inflation, mainly due to two effects: (i) With the inflaton in tribrid inflation (after inflation) being lighter than the waterfall field, the latter has a second decay channel with a much larger rate than for the decay into gravitinos. This reduces the branching ratio for the decay of the waterfall field into gravitinos. (ii) The inflaton generically decays later than the waterfall field, and it does not produce gravitinos when it decays. This leads to a dilution of the gravitino population from the decays of the waterfall field. The combination of both effects generically leads to a strongly reduced gravitino production in tribrid inflation.

Review Paper Variations and changes in habitat, productivity ...

African Journals Online (AJOL)

The Kyoga lake system, which is c. 4 m deep, originally had a diverse fish fauna, extensive macrophytes and wetlands. Most (82%) of its water comes from Lake Victoria, is controlled through three dams and has a short residence time of c. 3 months. Physical and chemical factors, plankton productivity and composition vary ...

Impact of product development efforts on product introduction and product customization abilities

DEFF Research Database (Denmark)

Chaudhuri, Atanu; Dawar, Saloni

2014-01-01

This paper investigates the impact of efforts in new product development-manufacturing integration (NPDMI) on new product introduction (NPI) and product customization (PC) abilities and the moderating effects of product design complexity and importance of new product development order winners...... (NPIOW) on the above relationships. The results from the data on 136 Indian manufacturing plants show that NPDMI, product design complexity and NPIOW all have significant positive impact on NPI and PC abilities. Importance of NPIOW has a positive moderating effect on the relationship between NPDMI and PC...... ability change but product design complexity demonstrate no such effect on the above relationships....

Antimicrobial usage and resistance in beef production

OpenAIRE

Cameron, Andrew; McAllister, Tim A.

2016-01-01

Antimicrobials are critical to contemporary high-intensity beef production. Many different antimicrobials are approved for beef cattle, and are used judiciously for animal welfare, and controversially, to promote growth and feed efficiency. Antimicrobial administration provides a powerful selective pressure that acts on the microbial community, selecting for resistance gene determinants and antimicrobial-resistant bacteria resident in the bovine flora. The bovine microbiota includes many harm...

Dispensing of vitamin products by retail pharmacies in South Africa ...

African Journals Online (AJOL)

Ilse Truter

Survey) years.7 About 39% of US residents have used at least one multivitamin and ... The ATC Classification system is recommended by the. World Health ... Females in the 30 to 39-year age group were dispensed 21.95% of products ...

Product and labour market regulations, production prices, wages and productivity

NARCIS (Netherlands)

Cette, G.; Lopez, J.; Mairesse, J.

2015-01-01

This study is an attempt to evaluate the effects of product and labour market regulations on industry productivity through their various impacts on changes in production prices and wages. In a first stage, the estimation of a regression equation on an industry*country panel, with controls for

Artistic production in dyslectic children.

Science.gov (United States)

Cohn, R; Neumann, M A

1977-01-01

In the study of children with language problems, particularly in reading and writing, it has been observed that some have an outstanding ability to produce artistic pictures and objects. These productions are perceptive, well organized and generally contain much action. Despite their pictorial skill these patients may have only a rudimentary use of coded symbolic graphic forms. Others display moderate ability in reading and writing. These patients frequently have the disorganized overacctive behavior and the motor clumsiness that is so common in the dyslectic child; some, however, are biologically effective. From this material we entertain the hypothesis that picture (artistic) productions are generated by the sub-dominant cerebral hemisphere, and that this function is quite distinct from the coded graphic operations resident in the dominant hemisphere. If this hypothesis is correct, it would seem socially benefical to allow these patients to develop their unique artistic ability to its full capacity, and not to overemphasize the correction of the disturbed coded symbol operations in remedial training.

The market for equity release products: Lessons from the ...

African Journals Online (AJOL)

Home Equity Release Products (ERPs) are innovative fi nancial instruments that enable elderly, retired people to use their unencumbered houses as a source of income/funding while they continue to reside in them, thereby seeking to address the constraints of the life cycle hypothesis. The loan and outstanding amounts ...

Effect of ammonia on ozone-initiated formation of indoor secondary products with emissions from cleaning products

Science.gov (United States)

Huang, Yu; Lee, Shun Cheng; Ho, Kin Fai; Ho, Steven Sai Hang; Cao, Nanying; Cheng, Yan; Gao, Yuan

2012-11-01

Biogenic volatile organic compounds (BVOCs) emitted from cleaning products and air fresheners indoors are prone to oxidation resulting in the formation of secondary pollutants that can pose health risks on residents. Ammonia (NH3) is ubiquitous in ambient and indoor environments. In this study, we investigated the effect of ammonia (NH3) on secondary pollutants formation from the ozonolysis of BVOCs emitted from cleaning products including floor cleaner (FC), kitchen cleaner (KC) and dishwashing detergent (DD) in a large environmental chamber. Our results demonstrated that the presence of NH3 (maximum concentration is 240 ppb) could significantly enhance secondary organic aerosols (SOAs) formation from the ozonolysis of all the three categories of cleaning products. For example, for the FC sample, the maximum total particle concentration was up to 2.0 × 104 # cm-3 in the presence of NH3, while it was 1.3 × 104 # cm-3 which was 35% lower without NH3. However, it was found that the extent of NH3 effect on SOAs formation from the ozonolysis of BVOCs emissions was component-dependent. The presence of NH3 in the reaction systems could increase the consumptions of d-limonene that is the dominant BVOC species as identified in cleaning products. The percent yields (%) of secondary carbonyl compounds generated from the ozonolysis of BVOCs emitted from three categories of cleaning products were identified in the presence and absence of NH3, respectively. The increase in SOAs particle number concentration can be attributed to the formation of condensable salts from reactions between NH3 and organic compounds generated from the BVOCs ozonolysis processes. By investigating the NH3 effect on the ozonolysis of BVOCs mixtures in contrast to the chemistry of individual compounds, a better assessment can be made of the overall impact cleaning products have on real indoor environments.

The GOES-R Product Generation Architecture

Science.gov (United States)

Dittberner, G. J.; Kalluri, S.; Hansen, D.; Weiner, A.; Tarpley, A.; Marley, S.

2011-12-01

The GOES-R system will substantially improve users' ability to succeed in their work by providing data with significantly enhanced instruments, higher resolution, much shorter relook times, and an increased number and diversity of products. The Product Generation architecture is designed to provide the computer and memory resources necessary to achieve the necessary latency and availability for these products. Over time, new and updated algorithms are expected to be added and old ones removed as science advances and new products are developed. The GOES-R GS architecture is being planned to maintain functionality so that when such changes are implemented, operational product generation will continue without interruption. The primary parts of the PG infrastructure are the Service Based Architecture (SBA) and the Data Fabric (DF). SBA is the middleware that encapsulates and manages science algorithms that generate products. It is divided into three parts, the Executive, which manages and configures the algorithm as a service, the Dispatcher, which provides data to the algorithm, and the Strategy, which determines when the algorithm can execute with the available data. SBA is a distributed architecture, with services connected to each other over a compute grid and is highly scalable. This plug-and-play architecture allows algorithms to be added, removed, or updated without affecting any other services or software currently running and producing data. Algorithms require product data from other algorithms, so a scalable and reliable messaging is necessary. The SBA uses the DF to provide this data communication layer between algorithms. The DF provides an abstract interface over a distributed and persistent multi-layered storage system (e.g., memory based caching above disk-based storage) and an event management system that allows event-driven algorithm services to know when instrument data are available and where they reside. Together, the SBA and the DF provide a

From Product Models to Product State Models

DEFF Research Database (Denmark)

Larsen, Michael Holm

1999-01-01

A well-known technology designed to handle product data is Product Models. Product Models are in their current form not able to handle all types of product state information. Hence, the concept of a Product State Model (PSM) is proposed. The PSM and in particular how to model a PSM is the Research...

The Resident Academic Project Program: A Structured Approach to Inspiring Academic Development During Residency Training.

Science.gov (United States)

Eckert, Jill; Vaida, Sonia J; Bezinover, Dmitri; McCloskey, Diane E; Mets, Berend

2016-02-15

We report the successful implementation of structured resident academic projects in our Department of Anesthesiology at the Penn State Hershey Medical Center. Beginning with the graduating class of 2010, we adopted an expectation that each resident complete a project that results in a manuscript of publishable quality. Defining a clear timeline for all steps in the project and providing research education, as well as the necessary infrastructure and ongoing support, has helped grow the academic productivity of our anesthesia residents.

17 CFR 229.1204 - (Item 1204) Oil and gas production, production prices and production costs.

Science.gov (United States)

2010-04-01

... production, production prices and production costs. 229.1204 Section 229.1204 Commodity and Securities... production, production prices and production costs. (a) For each of the last three fiscal years disclose... production cost, not including ad valorem and severance taxes, per unit of production. Instruction 1 to Item...

An Explanatory Study of Lean Practices in Job Shop Production/ Special Job Production/ Discrete Production/ Batch Shop Production Industries

OpenAIRE

Lavlesh Kumar Sharma; Ravindra Mohan Saxena

2014-01-01

In this paper, the study explores the benefits and advantages of Lean Practices or Lean Thinking in Job shop production/ Special job production/ Discrete production/ Batch shop production industries. The Lean Practices have been applied more compatible in Job shop production than in the continuous/ mass production because of several barriers and hurdles in the industrial context that influence the whole processes again and again, this happens due to the lack of knowledge about...

Mathematical modelling and optimization of hydrogen continuous production in a fixed bed bioreactor

Energy Technology Data Exchange (ETDEWEB)

Palazzi, E.; Perego, P.; Fabiano, B. [University of Genoa, Genova (Italy). Chemical and Process Engineering Department ' G.B. Bonino'

2002-09-01

The purpose of this paper is to investigate, both theoretically and experimentally, hydrogen production from agro-industrial by-products using a continuous bioreactor packed with a mixture of spongy and glass beads and inoculated with Enterobacter aerogenes. Replicated series of experimental runs were performed to study the effects of residence time on hydrogen evolution rate and to characterize the critical conditions for the wash out, as a function of the inlet glucose concentration and of the fluid superficial velocity. A further series of experimental runs was focused on the effects of both residence time and inlet glucose concentration over hydrogen productivity. A kinetic model of the process was developed and showed good agreement with experimental data, thus representing a potential tool to design a large-scale fermenter. In fact, the model was applied to the optimal design of a bioreactor suitable of feeding a phosphoric acid fuel cell of a target power. (author)

Clinical research in dermatology: resources and activities associated with a higher scientific productivity.

Science.gov (United States)

Molina-Leyva, Alejandro; Descalzo, Miguel A; García-Doval, Ignacio

2018-03-06

Clinical research papers and their derived metrics can be useful to assess the scientific production of medical and research centers. Diverse factors are probably associated to differences in scientific production. But there are scarce studies analyzing them. Resources are limited and have to be distributed efficiently. The objective of this study is to explore what resources and activities are potentially associated with a higher scientific productivity. A bibliometric study was performed to obtain information about scientific productivity. Papers included had to meet criteria to be considered clinical research in dermatology, additionally had to be published between the years 2005-2014, had to be included in Pubmed or Embase and had to include a Spanish center of dermatology as the correspondence address. Information about research resources and activities of the year 2015 was gathered by means of an online survey sent to the authors identified in the bibliometric study. The search strategy returned 8617 papers and only 1104 of them (12.81%) met the inclusion criteria. 63 out of 113 centers responded to the survey (55.75%). Factors associated with a higher scientific productivity were: the size of the resident program, the amount of time specifically dedicated to research, a lower clinical workload, and the number of clinical trials performed in the last year. We have demonstrated that some factors are associated with a higher scientific productivity. Residency program, more research staff, clinical workload redistribution and research motivation/initiatives are key strategies that could improve scientific productivity of a center.

Production monitoring system for understanding product robustness

DEFF Research Database (Denmark)

Boorla, Srinivasa Murthy; Howard, Thomas J.

2016-01-01

study is used to demonstrate how the monitoring system can be used to efficiently guide corrective action to improve product performance. It is claimed that the monitoring system can be used to dramatically cut the time taken to identify, planand execute corrective action related to typical quality......In the current quality paradigm, the performance of a product is kept within specification by ensuring that its parts are within specification. Product performance is then validated after final assembly. However, this does not control how robust the product performance is, i.e. how much...... it will vary between the specification limits. In this paper, a model for predicting product performance is proposed, taking into account design, assembly and process parameters live from production. This empowers production to maintain final product performance, instead of part quality. The PRECI‐IN case...

Hydrogen production from biomass pyrolysis gas via high temperature steam reforming process

International Nuclear Information System (INIS)

Wongchang, Thawatchai; Patumsawad, Suthum

2010-01-01

Full text: The aim of this work has been undertaken as part of the design of continuous hydrogen production using the high temperature steam reforming process. The steady-state test condition was carried out using syngas from biomass pyrolysis, whilst operating at high temperatures between 600 and 1200 degree Celsius. The main reformer operating parameters (e.g. temperature, resident time and steam to biomass ratio (S/B)) have been examined in order to optimize the performance of the reformer. The operating temperature is a key factor in determining the extent to which hydrogen production is increased at higher temperatures (900 -1200 degree Celsius) whilst maintaining the same as resident time and S/B ratio. The effects of exhaust gas composition on heating value were also investigated. The steam reforming process produced methane (CH 4 ) and ethylene (C 2 H 4 ) between 600 to 800 degree Celsius and enhanced production ethane (C 2 H 6 ) at 700 degree Celsius. However carbon monoxide (CO) emission was slightly increased for higher temperatures all conditions. The results show that the use of biomass pyrolysis gas can produce higher hydrogen production from high temperature steam reforming. In addition the increasing reformer efficiency needs to be optimized for different operating conditions. (author)

DOJ News Release: West Palm Beach Sellers of Unnecessary Septic Tank Products Plead Guilty to Wire Fraud

Science.gov (United States)

Moore, Nouerand and Lincoln, in concert with other employees of FBK Products, LLC., knowingly participated in a scheme to fraudulently market and sell an unnecessary and unneeded septic treatment product to residents of various states across the country.

The production of sinterable uranium dioxide from ammonium diuranate

International Nuclear Information System (INIS)

Fane, A.G.; Le Page, A.H.

1975-02-01

The development of a 0.13 m diameter pulsed fluidised bed reactor for the continuous production of sinterable uranium dioxide from ammonium diuranate is described. Calcination-reduction at 670 to 680 0 C produced powders with surface areas of 4 to 6 m 2 g -1 giving pellet densities in excess of 10.6 g cm -3 . Sinterability was relatively insensitive to changes in operating conditions, provided the availability of hydrogen was adequate, for gas flow rates in the range 0.95 to 1.4 l S -1 , pulse frequencies of 0.5 and 0.75 Hz and mean residence times of the solids from 0.6 to 1.4 hours. Sinterability was shown to be improved either by use of higher input concentrations, or by use of a secondary flow of hydrogen (about 5 per cent of input) fed into the powder collection system and flowing countercurrent to the UO 2 product. The maximum throughput of 17 kg UO 2 h -1 (0.6 hours mean residence time) required only 120 per cent of the stoichiometric requirement at an input concentration of 50 vol.per cent with secondary hydrogen flow. Results are given for studies of the kinetics of reduction of calcined ammonia diuranate in hydrogen and the residence time distribution of solids in a pulsed fluidised bed. Estimates based on these data suggested that the overall conversion of ammonium diuranate to uranium dioxide in the continuously operated pulsed fluidised bed reactor was in excess of 99 per cent. Continuous stabilisation of the UO 2 product was demonstrated at 12 kg h -1 or UO 2 , in a 0.15 m diameter glass stabiliser, using 10 vol.per cent air in nitrogen and a temperature of about 50 0 C. (author)

Attainable region analysis for continuous production of second generation bioethanol.

Science.gov (United States)

Scott, Felipe; Conejeros, Raúl; Aroca, Germán

2013-11-29

Despite its semi-commercial status, ethanol production from lignocellulosics presents many complexities not yet fully solved. Since the pretreatment stage has been recognized as a complex and yield-determining step, it has been extensively studied. However, economic success of the production process also requires optimization of the biochemical conversion stage. This work addresses the search of bioreactor configurations with improved residence times for continuous enzymatic saccharification and fermentation operations. Instead of analyzing each possible configuration through simulation, we apply graphical methods to optimize the residence time of reactor networks composed of steady-state reactors. Although this can be easily made for processes described by a single kinetic expression, reactions under analysis do not exhibit this feature. Hence, the attainable region method, able to handle multiple species and its reactions, was applied for continuous reactors. Additionally, the effects of the sugars contained in the pretreatment liquor over the enzymatic hydrolysis and simultaneous saccharification and fermentation (SSF) were assessed. We obtained candidate attainable regions for separate enzymatic hydrolysis and fermentation (SHF) and SSF operations, both fed with pretreated corn stover. Results show that, despite the complexity of the reaction networks and underlying kinetics, the reactor networks that minimize the residence time can be constructed by using plug flow reactors and continuous stirred tank reactors. Regarding the effect of soluble solids in the feed stream to the reactor network, for SHF higher glucose concentration and yield are achieved for enzymatic hydrolysis with washed solids. Similarly, for SSF, higher yields and bioethanol titers are obtained using this substrate. In this work, we demonstrated the capabilities of the attainable region analysis as a tool to assess the optimal reactor network with minimum residence time applied to the SHF and

Method for alignment of product and production concepts

DEFF Research Database (Denmark)

Pedersen, Rasmus; Kvist, Morten; Mortensen, Niels Henrik

2005-01-01

The right use of modular product architectures can help companies provide a great variety of customized products at a competitive price level, by reuse of knowledge, components, processes and utilization of economies of scale in many of the activities that are necessary to provide products...... for customers. Modular product architectures often serve as a basis for several products often referred to as product families. One or more product families may constitute a substantial amount of the total product portfolio of a company, and it is, therefore, of the greatest importance that concepts...... and solutions are evaluated thoroughly throughout the design phases because any design fault is likely to propagate to a large part of the business. Developing modular product architectures is therefore also the task of ensuring a fit between the products that can be made on the basis of the architecture...

Impact of greenhouse gases on agricultural productivity in Pakistan

International Nuclear Information System (INIS)

Valasai, G.D; Harijan, K.; Uqaili, M.S.; Memon, H.R

2005-01-01

Pakistan is an agricultural developing country. About 68% of the country's population resides in rural areas and is mostly linked with agriculture. Agricultural sector contributes more than 25% to GDP, employees about 45% of the labour force and contributes significantly to export earnings of the country. Energy sector is the major source (80%) of emissions of Greenhouse Gases (GHGs). Agriculture and livestock sectors are also responsible for GHGs emissions. The emissions of GHGs results in acid rain and earth's temperature rise (global warming). The destabilization of the global climate destroys natural ecosystem and increases natural disasters, such as violent storms, floods, droughts etc. The acid rain and these natural disasters affect the agricultural productivity. The study indicates that the agricultural productivity per capita in Pakistan decreased continuously during the last two decades. The paper concludes that due to emissions of GHGs, the agricultural productivity is significantly affected in the country. The government should take concrete measures to minimize the emissions of GHGs for increasing the agricultural productivity and reducing other harmful impacts in the country. This paper presents the review and analysis of the effects of GHGs emissions on the agricultural productivity in Pakistan. (author)

Product Structure, the Heart of Product Definition

Science.gov (United States)

DeHoog, C., Jr.

1999-01-01

This paper describes the LMMSS Product Definition System (PDS) philosophy and approach were the use of each item parts document or software can be traced to a specific end item (EI) serial/tail number of the product. It explains why a part-oriented approach to data organization and configuration management is required. The definition of part-oriented is that all appropriate product definition data products will be collected. Referenced and managed by their linkage/relationship to parts/items, The paper will touch upon how LMMSS store/controls product definition information under each project's top product designator in a two tiered approach. One tier for each product end item and another tier which contain/controls listings of drawings, documents. Specifications and standards that are required for hardware item definition.

Weaner production with low antimicrobial usage: a descriptive study

DEFF Research Database (Denmark)

Fertner, Mette Ely; Boklund, Anette; Dupont, Nana Hee

2015-01-01

Background: Health, productivity and antimicrobial use in the production of pigs are expected to be interrelated to some extent. Previous studies on register-based data have investigated these correlations with a subsequent large variation residing at the farm level. In order to study such farm...... factors in more detail we designed an elaborate interview-guide. By in-depth interviews of farmers with well-managed 7-30 kg (weaner) productions we sought to describe a set of common key-factors characterizing their management practices. Identification of such common practices could be used in follow......-up projects, investigating whether identified factors really are characteristic for good-practicing famers.Results: Eleven farms were selected for a farm visit and in-depth interview. Participating farms used less antimicrobials than the national median (8.2 animal daily doses/100 weaners/day), had...

Urban resident attitudes toward rodents, rodent control products, and environmental effects

Science.gov (United States)

Rodent control in urban areas can result in the inadvertent mortality of non-target species (e.g., bobcats). However, there is little detailed information about rodent control practices of urban residents. Our objective was to evaluate urban rodent control behaviors in two area...

Product-Marketing Innovation, Skills, and Firm Productivity Growth

DEFF Research Database (Denmark)

Junge, Martin; Severgnini, Battista; Sørensen, Anders

2016-01-01

The role of product and marketing innovation for productivity growth is addressed using survey and register data for the Danish economy. It is hypothesized that product and marketing innovation are complementary inputs and that innovation activities are skill-intensive. It is established...... that product and marketing innovation in skill-intensive firms results in significantly faster productivity growth. Moreover, product and marketing innovation have independent roles in productivity growth, which cannot be attributed to organizational changes. Finally, we apply an instrument variable approach...... for firms, innovation choices to study endogeneity. The results strongly support the idea that product–marketing innovation leads to faster productivity growth in skill-intensive firms....

Environmental assessment for the Consumer Products Efficiency Standards program

Energy Technology Data Exchange (ETDEWEB)

1980-05-23

The Energy Policy and Conservation Act of 1975 as amended by the National Energy Conservation Policy Act of 1978, requires the DOE to prescribe energy efficiency standards for thirteen consumer products. The Consumer Products Efficiency Standards (CPES) program covers the following products: refrigerators and refrigerator-freezers; freezers;clothes dryers;water heaters; room air conditioners; home heating equipment (not including furnaces); kitchen ranges and ovens; central air conditioners (cooling and heat pumps); furnaces; dishwashers; television sets; clothes washers; and humidifiers and dehumidifiers. DOE is proposing two sets of standards for all thirteen consumer products: intermediate standards to become effective in 1981 for the first nine products and in 1982 for the second four products, and final standards to become effective in 1986 and 1987, respectively. The final standards are more restrictive than the intermediate standards and will provide manufacturers with the maximum time permitted under the Act to plan and develop extensive new lines of efficient consumer products. The final standards proposed by DOE require the maximum improvements in efficiency which are technologically feasible and economically justified, as required by Section 325(c) of EPCA. The thirteen consumer products account for approximately 90% of all the energy consumed in the nation's residences, or more than 20% of the nation's energy needs. Increases in the energy efficiency of these consumer products can help to narrow the gap between the nation's increasing demand for energy and decreasing supplies of domestic oil and natural gas. Improvements in the efficiency of consumer products can thus help to solve the nation's energy crisis.

Product-Marketing Innovation, Skills and Firm Productivity Growth

DEFF Research Database (Denmark)

Junge, Martin; Severgnini, Battista; Sørensen, Anders

The role of product and marketing innovation for productivity growth is addressed using survey and register data for the Danish economy. It is argued that marketing and product innovation are complementary inputs and that innovation activities are skill-intensive. It is found that product...... and marketing innovation in skill-intensive firms results in significantly faster productivity growth than in unskilled-intensive firms that introduce this combination of innovation activities. More precisely, an increase in the share of educated workers of one percentage point, increases productivity growth...... by around 0.1 percentage point in firms with product and marketing innovation. In addition, it is found that firms that engage in product innovation but not in marketing innovation or the other way around do not demonstrate a growth effect from their innovation activities. It is also found that product...

An integrated production, inventory and preventive maintenance model for a multi-product production system

International Nuclear Information System (INIS)

Liu, Xuejuan; Wang, Wenbin; Peng, Rui

2015-01-01

This paper considers a production system that can produce multiple products alternately. Products go through the system in a sequence and a complete run of all products forms a production cycle. An integrated production, inventory and preventive maintenance model is constructed, which is characterized by the delay-time concept. Two different situations are studied based on whether the unqualified products and downtime caused by the failures of the system, set-up and preventive maintenance can be ignored or not. Three cases are considered for each situation, depending on the position of the preventive maintenance epochs: the first case, where preventive maintenance is carried out at the end of each production cycle; the second case, where preventive maintenance is carried out at each set-up time of the products; and the third case, where preventive maintenance is carried out at some set-up times only, since it may not always be optimal to carry out preventive maintenance at the end of the production cycle or at each set-up time. The modeling objectives are to find the optimal number of production cycles per year and the optimal position of preventive maintenance that will maximize the expected profit per unit time. Numerical examples, using real data, are presented to illustrate the model. - Highlights: • We propose an integrated economic production quantity and preventive maintenance model. • The situation that multiple products are produced on the same system alternately is studied. • Two situations are studied based on whether the downtime and the product quality can be ignored or not. • We use enumeration method and analytical method to select the optimal preventive maintenance policy, respectively. • We use the delay-time concept to model the preventive maintenance policy

Sustainable Multi-Product Seafood Production Planning Under Uncertainty

International Nuclear Information System (INIS)

Simanjuntak, Ruth; Mawengkang, Herman; Sembiring, Monalisa; Sinaga, Rani; Pakpahan, Endang J

2013-01-01

A multi-product fish production planning produces simultaneously multi fish products from several classes of raw resources. The goal in sustainable production planning is to meet customer demand over a fixed time horizon divided into planning periods by optimizing the tradeoff between economic objectives such as production cost, waste processed cost, and customer satisfaction level. The major decisions are production and inventory levels for each product and the number of workforce in each planning period. In this paper we consider the management of small scale traditional business at North Sumatera Province which performs processing fish into several local seafood products. The inherent uncertainty of data (e.g. demand, fish availability), together with the sequential evolution of data over time leads the sustainable production planning problem to a nonlinear mixed-integer stochastic programming model. We use scenario generation based approach and feasible neighborhood search for solving the model.

STATEMENT OF THE OPTIMIZATION PROBLEM OF CARBON PRODUCTS PRODUCTION

Directory of Open Access Journals (Sweden)

O. A. Zhuchenko

2016-08-01

Full Text Available The paper formulated optimization problem formulation production of carbon products. The analysis of technical and economic parameters that can be used to optimize the production of carbonaceous products had been done by the author. To evaluate the efficiency of the energy-intensive production uses several technical and economic indicators. In particular, the specific cost, productivity, income and profitability of production. Based on a detailed analysis had been formulated optimality criterion that takes into account the technological components of profitability. The components in detail the criteria and the proposed method of calculating non-trivial, one of them - the production cost of each product. When solving the optimization problem of technological modes of production into account constraints on the variables are optimized. Thus, restrictions may be expressed on the number of each product produced. Have been formulated the method of calculating the cost per unit of product. Attention is paid to the quality indices of finished products as an additional constraint in the optimization problem. As a result have been formulated the general problem of optimizing the production of carbon products, which includes the optimality criterion and restrictions.

Aspergillus oryzae nrtA affects kojic acid production.

Science.gov (United States)

Sano, Motoaki

2016-09-01

We analyzed the role of the nitrate transporter-encoding gene (nrtA) of Aspergillus oryzae by gene disruption. Southern hybridization analysis indicated that homologous recombination occurred at the resident nrtA locus. Real-time PCR showed that the nrtA gene was strongly inducible by NaNO3. The nrtA disruptant did not exhibit normal growth when nitrate was available as the sole nitrogen source. These results indicate that NrtA is essential for nitrate uptake in A. oryzae. Kojic acid (KA) production was inhibited by the addition of a small amount of sodium nitrate. The nrtA-disrupted strain was deficient in the uptake of nitrate. As a result, KA production in this strain was not considerably affected by the presence of nitrate.

Framework for product knowledge and product related knowledge which supports product modelling for mass customization

DEFF Research Database (Denmark)

Riis, Jesper; Hansen, Benjamin Loer; Hvam, Lars

2003-01-01

on experience from product modelling projects in several companies. Among them for example companies manufacturing electronic switchboards, spray dryer systems and air conditioning equipment. The framework is divided into three views: the product knowledge view, the life phase system view and the transformation...... and personalization. The framework for product knowledge and product related knowledge is based on the following theories: axiomatic design, technical systems, theory of domains, theory of structuring, theory of properties and the framework for the content of product and product related models. The framework is built......The article presents a framework for product knowledge and product related knowledge which can be used to support the product modelling process which is needed for developing IT systems. These IT systems are important tools for many companies when they aim at achieving mass customization...

Assessing the transfer of risk due to transportation of agricultural products.

Science.gov (United States)

Li, Pei-Chiun; Shih, Hsiu-Ching; Ma, Hwong-Wen

2015-02-01

Health risk assessment (HRA) is the process used to estimate adverse health effects on humans. The importance and sensitivity of food chains to HRA have been observed, but the impact of the transportation of food has generally been ignored. This study developed an exposure assessment to demonstrate the significance of the transportation of agricultural products in HRA. The associated case study estimated the health risks derived from various sources of arsenic emissions in Taiwan. Two assessment scenarios, self-sufficiency and transportation of agricultural products, were compared to calculate risk transfer ratios that show the impact of agriculture transportation. The risk transfer ratios found by the study range from 0.22 to 42.10, indicating that the quantity of transportation of agricultural products is the critical factor. High air deposition and high agricultural production are the two main contributors to the effect of the transportation of agricultural products on HRA. Risk reduction measures could be applied to high-pollution areas as well as to areas with high agricultural productivity to reduce ingestion risks to residents. Certain areas that are sensitive to the transportation of agricultural products may incur more risks if emissions increase in agriculturally productive counties. Copyright © 2014 Elsevier Ltd. All rights reserved.

PIGS BREEDING FOR THE PRODUCTION OF TRADITIONAL MEAT PRODUCTS

Directory of Open Access Journals (Sweden)

Đuro Senčić

2014-06-01

Full Text Available The fertile Slavonia is known for production of several types of cured meats: kulen, kulen sis, sausage, ham and bacon, and other pork products (“krvavica” - blood sausage, “švargl” - a type of brawn where chopped parts of head are stuffed inside the pig’s stomach, “čvarci” - a variant of pork crisps, fat. These products require “mature pigs” of adequate slaughter quality. Production of pigs intended for traditional meat products may take place in different production systems (open, closed, semi-open, “organic”. Each of these systems provides a specific quality of pigs for slaughter, reflecting on the quality of the final product. Production systems can have a significant impact on growth performance and carcass and meat quality of pigs. This effect arises from the interaction between housing conditions, the amount and composition of food and used pig genotype. The choice of a production system depends on local production conditions, pig genotype, consumer demand (market for a given product quality, and other factors. Due to their quality, the traditional Slavonian meat products can become a recognizable Croatian brand in both domestic and international markets. Production of standard quality products requires standard quality of pigs. Therefore this book is focused on such pigs production.

78 FR 20176 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

Science.gov (United States)

2013-04-03

..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... renewable electricity production, refined coal production, and Indian coal production under section 45... resources, and to 2013 sales of refined coal and Indian coal produced in the United States or a possession...

77 FR 21835 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

Science.gov (United States)

2012-04-11

..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... electricity production, refined coal production, and Indian coal production under section 45. DATES: The 2012... sales of refined coal and Indian coal produced in the United States or a possession thereof. Inflation...

Endurance test for IR rig for RI production assembly (test procedure)

International Nuclear Information System (INIS)

Chung, Heung June; Ryu, Jeong Soo

2000-08-01

This test procedure details the test loop, test method, and test procedure for pressure drop, vibration and endurance test of IR Rig for RI production. From the pressure drop test, the hydraulic design requirements of the capsule are verified. HANARO limit condition is checked and the compatibility with HANARO core is verified. From flow induced vibration test vibration frequency and displacement are investigated. The wear of IR Rig is investigated through endurance test, and these data are used to evaluate the expected wear at maximum resident time of the IR Rig for RI production

A model for optimizing the production of pharmaceutical products

Directory of Open Access Journals (Sweden)

Nevena Gospodinova

2017-05-01

Full Text Available The problem associated with the optimal production planning is especially relevant in modern industrial enterprises. The most commonly used optimality criteria in this context are: maximizing the total profit; minimizing the cost per unit of production; maximizing the capacity utilization; minimizing the total production costs. This article aims to explore the possibility for optimizing the production of pharmaceutical products through the construction of a mathematical model that can be viewed in two ways – as a single-product model and a multi-product model. As an optimality criterion it is set the minimization of the cost per unit of production for a given planning period. The author proposes an analytical method for solving the nonlinear optimization problem. An optimal production plan of Tylosin tartrate is found using the single-product model.

"Product on Stopper" in a Lyophilized Drug Product: Cosmetic Defect or a Product Quality Concern?

Science.gov (United States)

Mehta, Shyam B; Roy, Shouvik; Yang, Han-Chang Cathy

2018-06-01

During manufacturing of a lyophilized drug product, operator errors in product handling during loading of product filled vials onto the lyophilizer can lead to a seemingly cosmetic defect which can impact certain critical quality attributes of finished product. In this study, filling of a formulated monoclonal antibody in vials was performed using a peristaltic pump filling unit, and subsequently, the product was lyophilized. After lyophilization, upon visual inspection, around 40% of vials had cosmetic defect with residual product around stopper of the vial and were categorized as "product on stopper" vials, whereas remaining 60% vials with no cosmetic defect were called "acceptable vials." Both groups of vials from 1 single batch were tested for critical quality attributes including protein concentration (ultraviolet absorbance at 280), residual moisture (Karl Fischer), sterility (membrane filtration), and container closure integrity (CCI) (blue dye ingress). Analysis of protein quality attributes such as aggregation, protein concentration, residual moisture showed no significant difference between vials with "product on stopper" and "acceptable vials." However, CCI of the "product on stopper" vials was compromised due to the presence of product around stopper of the vial. The results from this case study demonstrate the following 2 important findings: (1) that a seemingly cosmetic defect may impact product quality, compromising the integrity of the product and (2) that CCI test method can be used as an orthogonal method to sterility testing to evaluate sterility assurance of the product. The corrective action proposed to mitigate this defect is use of a larger sized vial that can potentially minimize this defect that arises because of product handling errors. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Bioethanol production potential from Brazilian biodiesel co-products

Energy Technology Data Exchange (ETDEWEB)

Visser, Evan Michael; Filho, Delly Oliveira; Martins, Marcio Aredes [Departamento de Engenharia Agricola, Universidade Federal de Vicosa, Campus Universitario 36570-000 Vicosa, MG (Brazil); Steward, Brian L. [Department of Agricultural and Biosystems Engineering, Iowa State University, 214D Davidson Hall, Ames, IA 50011 (United States)

2011-01-15

One major problem facing the commercial production of cellulosic ethanol is the challenge of economically harvesting and transporting sufficient amounts of biomass as a feedstock at biorefinery plant scales. Oil extraction for biodiesel production, however, yields large quantities of biomass co-products rich in cellulose, sugar and starch, which in many cases may be sufficient to produce enough ethanol to meet the alcohol demands of the transesterification process. Soybean, castor bean, Jatropha curcas, palm kernel, sunflower and cottonseed were studied to determine ethanol production potential from cellulose found in the oil extraction co-products and also their capacity to meet transesterification alcohol demands. All crops studied were capable of producing enough ethanol for biodiesel production and, in the case of cottonseed, 470% of the transesterification demand could be met with cellulosic ethanol production from oil extraction co-products. Based on Brazilian yields of the crops studied, palm biomass has the highest potential ethanol yield of 108 m{sup 3} km{sup -2} followed by J. curcas with 40 m{sup 3} km{sup -2}. A total of 3.5 hm{sup 3} could be produced from Brazilian soybean oil extraction co-products. (author)

Medicinal and commercial uses of ostrich products in Tanzania.

Science.gov (United States)

Magige, Flora; Røskaft, Eivin

2017-08-23

Traditional communities have been utilizing animal products for numerous purposes and have for a long time contributed to the accumulation of world knowledge. Local people in Tanzania and elsewhere in Africa, have been using birds including ostriches as pets or their products such as meat, eggs as food; their body parts such as feathers, bones and hide for ornaments but more importantly have used such products in traditional medicine and rituals. Nevertheless, there is a general lack of information about the differences that exist between local people with different cultures, and the best use of such products to improve their livelihoods. This study aimed to determine the use of ostrich products among people residing around Serengeti National Park and explore the potential of improving livelihoods through game ranching. Use of the products was compared between that of agriculturalists with long hunting traditions in the Serengeti District to the west of Serengeti National Park (SNP) and the largely pastoral community in the Ngorongoro District to the east by using semistructured questionnaires in June 2006. A total of 115 respondents were interviewed, and the majority (74.5%) in the Serengeti district admitted that ostriches were mainly hunted for their products by snares, while in the Ngorongoro district, 98.2% of the respondents said that villagers only gathered products such as feathers and eggs. Ostriches were hunted for food, ornamentation, medical and economic purposes, and eggs and oil, which are believed to have medicinal properties, were used for the treatment of various ailments, including asthma. This indigenous knowledge of the medicinal value of ostrich products must be integrated with scientific knowledge to prove the supposed medical efficacy of the products. Ostrich products also had market value and were thus sold to the villagers. Since it has been found that ostrich products are commercially used, legal establishment of markets through game

Production of steam cracking feedstocks by mild cracking of plastic wastes

Energy Technology Data Exchange (ETDEWEB)

Angyal, Andras; Miskolczi, Norbert; Bartha, Laszlo; Tungler, Antal; Nagy, Lajos; Vida, Laszlo; Nagy, Gabor

2010-11-15

In this work the utility of new possible petrochemical feedstocks obtained by plastic waste cracking has been studied. The cracking process of polyethylene (PE), polyethylene-polypropylene (PEPP) and polyethylene-polystyrene (PEPS) has been carried out in a pilot scale tubular reactor. In this process mild reaction parameters has been applied, with the temperature of 530 C and the residence time of 15 min. The produced hydrocarbon fractions as light- and middle distillates were tested by using a laboratory steam cracking unit. It was concluded that the products of the mild cracking of plastic wastes could be applied as petrochemical feedstocks. Based on the analytical data it was determined that these liquid products contained in significant concentration (25-50 wt.%) of olefin hydrocarbons. Moreover the cracking of polystyrene containing raw material resulted in liquid products with significant amounts of aromatic hydrocarbons too. The steam cracking experiments proved that the products obtained by PE and PEPP cracking resulted in similar or better ethylene and propylene yields than the reference samples, however the aromatic content of PEPS products reduced the ethylene and propylene yields. (author)

Tobacco Products Production and Operations Reports

Data.gov (United States)

Department of the Treasury — Monthly statistical reports on tobacco products production and operations. Data for Tobacco Statistical Release is derived directly from the Report – Manufacturer of...

Productivity raising approaches in the logistic production system

Directory of Open Access Journals (Sweden)

Miroslav Rakyta

2001-01-01

Full Text Available This paper deals with the productivity of the logistic production system. The aim is to define the intermediate state of the production machines and equipment (OOE, identification of the material flows, idle time and breakdown forecasting, with the following purchase of the required spare parts. The goal of the system is the satisfaction of the customer´s needs and the minimalisation of not fulfilling the required terms for delivery with simultaneous increasing of the logistic production system productivity.

Radiation sterilization of medical products- current trends and future prospects

International Nuclear Information System (INIS)

Sharma, G.

1997-01-01

In medical practice use of sterile pharmaceuticals and single use disposable medical devices is steadily increasing. Sterile pharmaceuticals like injections and ophthalmic ointments are required for therapy. Medical devices are employed for diagnostic, drug administration or corrective purposes, and as implants for temporary, short term or long term residence in the human system. All these products are made available in sterile form by treating them to a suitable process of sterilization i.e. dry/wet heat, ethylene oxide (EtO) gas or ionizing radiation. In this paper current trends and future prospects of radiation sterilization of medical products are given in detail. 9 refs., 7 tabs

A product feature-based user-centric product search model

OpenAIRE

Ben Jabeur, Lamjed; Soulier, Laure; Tamine, Lynda; Mousset, Paul

2016-01-01

During the online shopping process, users would search for interesting products and quickly access those that fit with their needs among a long tail of similar or closely related products. Our contribution addresses head queries that are frequently submitted on e-commerce Web sites. Head queries usually target featured products with several variations, accessories, and complementary products. We present in this paper a product feature-based user-centric model for product search involving in a...

75 FR 18015 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

Science.gov (United States)

2010-04-08

..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... coal production, and Indian coal production under section 45. FOR FURTHER INFORMATION CONTACT: Philip... Coal, and Indian Coal:'', Line 26, the language ``is 2.15 cents per kilowatt hour on the'' is corrected...

PDT (Product Data Technology), Production and Society

DEFF Research Database (Denmark)

Vesterager, Johan

1997-01-01

Information and communication technology (ICT) constitute a genuine technical revolution by enabling a dynamic and flexible support or automation of knowledge and information work. Bearing in mind that products are frozen knowledge, ICT as known will change the way we produce products dramatically....... The use of ICT in engineering of products constitutes product data technology (PDT).This paper presents a a basic platform for an understanding the ongoing revolution with focus on the PDT-area taking outset in the fundamental elements of knowledge and information work: creation, transformation...

Productivity

DEFF Research Database (Denmark)

Spring, Martin; Johnes, Geraint; Hald, Kim Sundtoft

Productivity is increasingly critical for developed economies. It has always been important: as Paul Krugman puts it, “Productivity isn’t everything, but in the long run it is almost everything. A country’s ability to improve its standard of living over time depends almost entirely on its ability...... to raise its output per worker”(Krugman, 1994). Analyses of productivity have, by and large, been the preserve of economists. Operations Management (OM) is rooted in a similar concern for the efficient use of scarce resources; Management Accounting (MA) is concerned with the institutionalised measurement...... and management of productivity. Yet the three perspectives are rarely connected. This paper is a sketch of a literature review seeking to identify, contrast and reconcile these three perspectives. In so doing, it aims to strengthen the connections between policy and managerial analyses of productivity....

CFD optimization of continuous stirred-tank (CSTR) reactor for biohydrogen production.

Science.gov (United States)

Ding, Jie; Wang, Xu; Zhou, Xue-Fei; Ren, Nan-Qi; Guo, Wan-Qian

2010-09-01

There has been little work on the optimal configuration of biohydrogen production reactors. This paper describes three-dimensional computational fluid dynamics (CFD) simulations of gas-liquid flow in a laboratory-scale continuous stirred-tank reactor used for biohydrogen production. To evaluate the role of hydrodynamics in reactor design and optimize the reactor configuration, an optimized impeller design has been constructed and validated with CFD simulations of the normal and optimized impeller over a range of speeds and the numerical results were also validated by examination of residence time distribution. By integrating the CFD simulation with an ethanol-type fermentation process experiment, it was shown that impellers with different type and speed generated different flow patterns, and hence offered different efficiencies for biohydrogen production. The hydrodynamic behavior of the optimized impeller at speeds between 50 and 70 rev/min is most suited for economical biohydrogen production. Copyright 2010 Elsevier Ltd. All rights reserved.

The early phase of /see symbol/ production development in adult Japanese learners of English.

Science.gov (United States)

Saito, Kazuya; Munro, Murray J

2014-12-01

Although previous research indicates that Japanese speakers' second language (L2) perception and production of English /see symbol/ may improve with increased L2 experience, relatively little is known about the fine phonetic details of their /see symbol/ productions, especially during the early phase of L2 speech learning. This cross-sectional study examined acoustic properties of word-initial /see symbol/ from 60 Japanese learners with a length of residence of between one month and one year in Canada. Their performance was compared to that of 15 native speakers of English and 15 low-proficiency Japanese learners of English. Formant frequencies (F2 and F3) and F1 transition durations were evaluated under three task conditions--word reading, sentence reading, and timed picture description. Learners with as little as two to three months of residence demonstrated target-like F2 frequencies. In addition, increased LOR was predictive of more target-like transition durations. Although the learners showed some improvement in F3 as a function of LOR, they did so mainly at a controlled level of speech production. The findings suggest that during the early phase of L2 segmental development, production accuracy is task-dependent and is influenced by the availability of L1 phonetic cues for redeployment in L2.

Impact of livestock Scale on Rice Production in Battambang of Cambodia

Science.gov (United States)

Siek, D.; Xu, S. W.; Wyu; Ahmed, A.-G.

2017-10-01

Increasing the awareness of environmental protection especially in the rural regions is important as most the farmers reside in that region. Crop-livestock proudciton has proven in many ways to encourage environmental protection. This study analyzes among other factors the impacto of livestock scale on rice production. Two regressions: Ordinary Least Square (OLS) and stepwise regression was applied to investigate these interrelationship. The result stress of three factors encouraging livestock production namely size of farmland, scale of livestock and income acquired from other jobs. The study further provides recommends to the government based on the findings of the study.

Utilization of Biodiesel By-Products for Biogas Production

Science.gov (United States)

Kolesárová, Nina; Hutňan, Miroslav; Bodík, Igor; Špalková, Viera

2011-01-01

This contribution reviews the possibility of using the by-products from biodiesel production as substrates for anaerobic digestion and production of biogas. The process of biodiesel production is predominantly carried out by catalyzed transesterification. Besides desired methylesters, this reaction provides also few other products, including crude glycerol, oil-pressed cakes, and washing water. Crude glycerol or g-phase is heavier separate liquid phase, composed mainly by glycerol. A couple of studies have demonstrated the possibility of biogas production, using g-phase as a single substrate, and it has also shown a great potential as a cosubstrate by anaerobic treatment of different types of organic waste or energy crops. Oil cakes or oil meals are solid residues obtained after oil extraction from the seeds. Another possible by-product is the washing water from raw biodiesel purification, which is an oily and soapy liquid. All of these materials have been suggested as feasible substrates for anaerobic degradation, although some issues and inhibitory factors have to be considered. PMID:21403868

Products and environment. Report on integrated product policy

International Nuclear Information System (INIS)

2001-01-01

The National Commission for Sustainable Development established on 16 November 1999 a subgroup which had as one of its tasks to formulate a national strategy or a strategic view on how Finland should promote integrated product policy in accordance with the requirements of sustainable development. The aim of integrated product policy is to improve the environmental friendliness of products and product systems by taking into account the environmental effects during their entire lifecycles. Its leading principles are lifecycle thinking, market-basedness, integration of environmental aspects into economic activity, and that all actors within the product chain (consumers, trade, companies) decrease the environmental consequences of their activities according to the principle of shared responsibility and to their preconditions. Political decision-making and administration should provide firms and clients with the required preconditions and i.a. remove obstacles to knowledge and promote research. In product policy, emphasis is on especially those instruments that encourage actors to develop their activities. At national level, economic instruments should be directed to domestic demand and use of products. It is often most appropriate to develop economic instruments for production and legislation and other regulation within international co-operation. (orig.)

Making Online Products More Tangible: The Effect of Product Presentation Formats on Product Evaluations.

Science.gov (United States)

Verhagen, Tibert; Vonkeman, Charlotte; van Dolen, Willemijn

2016-07-01

Although several studies have looked at the effects of online product presentations on consumer decision making, no study thus far has considered a potential key factor in online product evaluations: tangibility. The present study aims at filling this gap by developing and testing a model that relates different online product presentation formats to the three-dimensional concept of product tangibility. We test how the three tangibility dimensions influence perceived diagnosticity and, eventually, online purchase intentions. A between-subjects lab experiment (n = 366) was used to test the hypothesized effects of three common online product presentation formats (pictures vs. 360 spin rotation vs. virtual mirror). The results showed that out of these formats, virtual mirrors were superior in providing a sense of product tangibility, followed by the 360-spin rotation format and static pictures. Furthermore, in terms of predictive validity, two of the three tangibility dimensions significantly increased perceived diagnosticity, which, in turn, positively and strongly affected purchase intentions. Overall, our results add to previous works studying the relationships between online product presentation formats and consumer decision making. Also, they hold value for online practitioners by highlighting the potential benefits of applying technologically advanced product presentation formats such as the virtual mirror.

Advances in product family and product platform design methods & applications

CERN Document Server

Jiao, Jianxin; Siddique, Zahed; Hölttä-Otto, Katja

2014-01-01

Advances in Product Family and Product Platform Design: Methods & Applications highlights recent advances that have been made to support product family and product platform design and successful applications in industry. This book provides not only motivation for product family and product platform design—the “why” and “when” of platforming—but also methods and tools to support the design and development of families of products based on shared platforms—the “what”, “how”, and “where” of platforming. It begins with an overview of recent product family design research to introduce readers to the breadth of the topic and progresses to more detailed topics and design theory to help designers, engineers, and project managers plan, architect, and implement platform-based product development strategies in their companies. This book also: Presents state-of-the-art methods and tools for product family and product platform design Adopts an integrated, systems view on product family and pro...

Managing complexity of product mix and production flow in configure-to-order production systems

DEFF Research Database (Denmark)

Myrodia, Anna; Bonev, Martin; Hvam, Lars

2014-01-01

In designing configure-to-order production systems for a growing product variety, companies are challenged with an increased complexity for obtaining high productivity levels and cost-effectiveness. In academia several optimization methods and conceptual frameworks for substituting components, or...

Production of GMP certified herbal products in Malaysian Nuclear Agency

International Nuclear Information System (INIS)

Daryl Jesus Arapoc; Bohari Yaacob; Zainah Adam

2015-01-01

This paper will discuss on up scaling production of herbal product. A pilot scale production plant were developed in Block 37 and equipped with automated and semi-automated production machines which have the capacity to produce 100 thousand pieces of tablet per hour. In order to ensure the quality of the products, raw material inspections, IPQC and FPQC will be done on each batch. Besides that, certification of GMP will be done concurrently. One of the products that will be launch soon is the Mas Cotek tablet. This product is the result of numerous years of researches that had been done in BTP. This includes formulation and production of the product itself. It is hope that more herbal products can be produce in near future. (author)

Extending product modeling methods for integrated product development

DEFF Research Database (Denmark)

Bonev, Martin; Wörösch, Michael; Hauksdóttir, Dagný

2013-01-01

Despite great efforts within the modeling domain, the majority of methods often address the uncommon design situation of an original product development. However, studies illustrate that development tasks are predominantly related to redesigning, improving, and extending already existing products...... and PVM methods, in a presented Product Requirement Development model some of the individual drawbacks of each method could be overcome. Based on the UML standard, the model enables the representation of complex hierarchical relationships in a generic product model. At the same time it uses matrix....... Updated design requirements have then to be made explicit and mapped against the existing product architecture. In this paper, existing methods are adapted and extended through linking updated requirements to suitable product models. By combining several established modeling techniques, such as the DSM...

Impact of the Surgical Research Methodology Program on surgical residents' research profiles.

Science.gov (United States)

Farrokhyar, Forough; Amin, Nalin; Dath, Deepak; Bhandari, Mohit; Kelly, Stephan; Kolkin, Ann M; Gill-Pottruff, Catherine; Skot, Martina; Reid, Susan

2014-01-01

To evaluate whether implementing the formal Surgical Research Methodology (SRM) Program in the surgical residency curriculum improved research productivity compared with the preceding informal Research Seminar Series (RSS). The SRM Program replaced the RSS in July 2009. In the SRM Program, the curriculum in Year-1 consisted of 12 teaching sessions on the principles of clinical epidemiology and biostatistics, whereas the focus in Year-2 was on the design, conduct, and presentation of a research project. The RSS consisted of 8 research methodology sessions repeated annually for 2 years along with the design, conduct, and presentation of a research project. Research productivity was measured as the number of peer-reviewed publications and the generation of studies with higher levels of evidence. Outcome measures were independently assessed by 2 authors to avoid bias. Student t test and chi-square test were used for the analysis. Frequencies, mean differences with 95% CI, and effect sizes have been reported. In this study, 81 SRM residents were compared with 126 RSS residents. The performance of the SRM residents was superior on all metrics in our evaluation. They were significantly more productive and published more articles than the RSS residents (mean difference = 1.0 [95% CI: 0.5-1.5], p research performance improved 11.0 grades (95% CI: 8.5%-13.5%, p research methodology is crucial to appropriately apply evidence-based findings in clinical practice. The SRM Program has significantly improved the research productivity and performance of the surgical residents from all disciplines. The implementation of a similar research methodology program is highly recommended for the benefit of residents' future careers and ultimately, evidence-based patient care. Copyright © 2014 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Productivity growth patterns in US dairy products manufacturing plants

NARCIS (Netherlands)

Geylani, P.C.; Stefanou, S.E.

2011-01-01

We analyse the productivity growth patterns in the US dairy products industry using the Census Bureau's plant-level data set. We decompose Total Factor Productivity (TFP) growth into the scale and technical change components and analyse variability of plants' productivity by constructing transition

Micro Products - Product Development and Design

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard

2003-01-01

Innovation within the field of micro and nano technology is to a great extent characterized by cross-disciplinary skills. The traditional disciplines like e.g. physics, biology, medicine and engineering are united in a common development process that can only take place in the presence of multi......-disciplinary competences. One example is sensors for chemical analysis of fluids, where chemistry, biology and flow mechanics all influence the design of the product and thereby the industrial fabrication of the product [1]. On the technological side the development has moved very fast, primarily driven by the need...... of the electronics industry to create still smaller chips with still larger capacity. Therefore the manufacturing technologies connected with micro/nano products in silicon are relatively highly developed compared to the technologies used for manufacturing micro products in metals, polymers and ceramics. For all...

Production management (1976)

International Nuclear Information System (INIS)

Lee, Sun Ryong

1976-03-01

This book introduces production management theory, which gives descriptions of production and system, systems approach, development of production management, Taylor system, Ford system, types of production system, measuring ingredients model of production management, decision of production management, selection of production facilities, arrangement of facilities design of work method and task, work measure system, demanding fore casting, production quality system and credibility system.

Product Customization

DEFF Research Database (Denmark)

Hvam, Lars; Mortensen, Niels Henrik; Riis, Jesper

For the majority of industrial companies, customizing products and services is among the most critical means to deliver true customer value and achieve superior competitive advantage. The challenge is not to customize products and services in itself – but to do it in a profitable way...... from more than 40 product configuration projects in companies providing customer tailored products and services........ The implementation of a product configuration system is among the most powerful ways of achieving this in practice, offering a reduction of the lead time for products and quotations, faster and more qualified responses to customer inquiries, fewer transfers of responsibility and fewer specification mistakes...

The Deployment of Product-Related Environmental Legislation into Product Requirements

Directory of Open Access Journals (Sweden)

Daniela C. A. Pigosso

2016-04-01

Full Text Available Environmental legislation is increasingly changing its focus from manufacturing-oriented to product-oriented instruments. Compliance with product-related environmental legislation is achieved by the incorporation of environmental requirements into the early phases of the product development process (PDP. Nevertheless, the deployment of product-related environmental legislation into product requirements is still a challenge. This study followed an inductive approach to propose a guideline to support the identification, analysis and deployment of product requirements based on product-related environmental legislation. The guideline is composed of nine steps, clustered into three groups according to their main objective: (A identification of environmental product-related legislation; (B identification of legislative topics to be considered for the deployment of requirements; and (C creation and validation of product requirements. The product requirements deployed are to be considered during the PDP. The guideline was evaluated in an expert consultation in a large manufacturing company, suggesting that it can be used to support the systematization and deployment of product-related environmental requirements.

Utilization of Biodiesel By-Products for Biogas Production

Directory of Open Access Journals (Sweden)

Nina Kolesárová

2011-01-01

Full Text Available This contribution reviews the possibility of using the by-products from biodiesel production as substrates for anaerobic digestion and production of biogas. The process of biodiesel production is predominantly carried out by catalyzed transesterification. Besides desired methylesters, this reaction provides also few other products, including crude glycerol, oil-pressed cakes, and washing water. Crude glycerol or g-phase is heavier separate liquid phase, composed mainly by glycerol. A couple of studies have demonstrated the possibility of biogas production, using g-phase as a single substrate, and it has also shown a great potential as a cosubstrate by anaerobic treatment of different types of organic waste or energy crops. Oil cakes or oil meals are solid residues obtained after oil extraction from the seeds. Another possible by-product is the washing water from raw biodiesel purification, which is an oily and soapy liquid. All of these materials have been suggested as feasible substrates for anaerobic degradation, although some issues and inhibitory factors have to be considered.

Product numerical range in a space with tensor product structure

OpenAIRE

Puchała, Zbigniew; Gawron, Piotr; Miszczak, Jarosław Adam; Skowronek, Łukasz; Choi, Man-Duen; Życzkowski, Karol

2010-01-01

We study operators acting on a tensor product Hilbert space and investigate their product numerical range, product numerical radius and separable numerical range. Concrete bounds for the product numerical range for Hermitian operators are derived. Product numerical range of a non-Hermitian operator forms a subset of the standard numerical range containing the barycenter of the spectrum. While the latter set is convex, the product range needs not to be convex nor simply connected. The product ...

Framework for developing product strategy for Configure-To-Order products

DEFF Research Database (Denmark)

Myrodia, Anna; Hvam, Lars

2014-01-01

Companies producing customized products tend to increase the variety of their product portfolio, in order to fulfill the demand of their customers and align with the competitors. Nevertheless the profitability of the product families may vary greatly. The purpose of this paper is to analyze...... profitability of Configure-To-Order (CTO) products. The framework consists of a 4-step model: Analysis of product assortment, Profitability analysis on configured products, Market and Competitors analysis, Scenarios for future product assortment. The suggested framework is tested on a company. The results...... in terms of product delimitation and experiences gained from the case study are further discussed....

Product samples stimulate choice of unfamiliar healthful food products.

Science.gov (United States)

Schickenberg, B; van Assema, P; Brug, J; de Vries, N K

2011-08-01

The purpose of this study was to assess whether the availability of a product sample of an unfamiliar low-fat or fruit and vegetable products stimulates choice for this product among food neophobic young adults. The study had a 2 (experimental vs. control group) by 4 (low-fat bread spread, low-fat cheese, fruit juice, fruit and vegetable juice) between subjects design with a pre-and post-experiment questionnaire. The study was conducted in restaurant rooms of several educational institutions in the Netherlands among a convenience sample of 197 food neophobic young adults aged 17-25 years. A small bite or sip-sized sample of the target product was provided as an intervention. The effect measure was choice of either an unfamiliar healthful food product or a traditional food product. Offering a sample of an unfamiliar healthful food product resulted in 51% of the participants in the experimental group choosing this product vs. 36.4% in the control group. Providing food product samples seems to be a promising strategy in healthy diet promotion programs for food neophobic young adults to increase first-time trial of unfamiliar low-fat and fruit and vegetable products. Copyright © 2011 Elsevier Ltd. All rights reserved.

KLE Translog production function and total factor productivity

Czech Academy of Sciences Publication Activity Database

Klacek, J.; Vošvrda, Miloslav; Schlosser, Š.

2007-01-01

Roč. 87, č. 4 (2007), s. 261-274 ISSN 0322-788X Institutional research plan: CEZ:AV0Z10750506 Keywords : total factor productivity * translog production function * aggregate production function * least squares method * ridge regression Subject RIV: AH - Economics

Clean production and design of products - Complex system and environmental politics of products

International Nuclear Information System (INIS)

Sanchez, M.

1999-01-01

The orientation of the environmental problem in sustainable terms, especially in the industrialized economies, a new profile in the last years has found. In these economies, the search of a clean production franked by a coherent politics of products and the contribution of the design of products, it have given to the environmental speech a new dimension. With the present text it is sought to respond to the necessity of exploring in Colombia this topic that has a decisive paper inside the instruments of protection of the environment cooperating to improve the quality of life in other latitudes. At the moment the theoretical foundations around the development of products play a important role in the different lines of applied investigation carried out by these countries, especially in the mark of a politics of sustainable development. In spite of the importance of this factor in the industrialized countries where the capacity of integration of a coordinated administration is of great meaning, in Colombia, particularly, the relationship between development and design of products with industry, investigation and political of development and, for our case with a clean production, it is characterized by the scarce insert and attention of this discipline

RPC Production at General Tecnica: a mass scale production

International Nuclear Information System (INIS)

Della Volpe, D.; Morganti, S.

2006-01-01

The construction of LHC has deeply changed the RPC production. The enormous amount of detector needed and the strong requirements on gas volume quality had a deep impact on the production chain and on the QC and QA at the production site. This basically has brought the RPC from an almost hand-crafted detector to a medium scale mass product. The most critical aspects of the production chain have been modified and/or improved introducing new and more rigorous QC and QA procedures to guarantee the detector quality and improve the management of storage and the procurement on materials. Here it will be presented the work carried on in the last four year at the production site to improve and check the quality and the results achieved. Something like 10000 RPC were produced between 2002 and 2005. Also a preliminary and rough analysis on the efficiencies of the various phases in the chain production based on ATLAS production will be presented

Flour production from shrimp by-products and sensory evaluation of flour-based products

Directory of Open Access Journals (Sweden)

Thiago Mendes Fernandes

2013-08-01

Full Text Available The objective of this work was to evaluate the production of flour using by-products (cephalothorax obtained from the shrimp (Litopenaeus vannamei industry, and to perform a sensory analysis of shrimp flour-based products. Physicochemical and microbiological analyses on fresh cephalothorax and on manufactured flour were performed, as well as the determination of cholesterol content of this flour, and the sensorial evaluation of soup and pastry made with this flour. By the microbiological analyses, no pathogenic microorganism was detected in the samples. Physicochemical analyses of flour showed high levels of protein (50.05% and minerals (20.97%. Shrimp cephalothorax flour showed high levels of cholesterol. The sensory evaluation indicated a good acceptance of the products, with satisfactory acceptability index (81% for soup, and 83% for pastry, which indicates that shrimp cephalothorax in the form of flour has a potential for developing new products.

Swine production.

Science.gov (United States)

Plain, Ronald L; Lawrence, John D

2003-07-01

The US swine industry is large and growing. The quantity of pork desired by consumers of US pork is growing at the rate of 1.5%/y. New production systems and new technology have enabled production per sow to grow at a rate of 4% annually in recent years. Consequently, the number of sows in the United States is declining. Because productivity growth is outpacing demand growth, the deflated price of hogs and pork is declining. Hog production and prices continue to exhibit strong seasonal and cyclic patterns. Pork production is usually lowest in the summer and highest in the fall. Production and prices tend to follow 4-year patterns. The US swine industry continues to evolve toward fewer and larger producers who rely on contracts for both hog production and marketing. In 2000, over half of the hogs marketed were from approximately 156 firms marketing more than 50,000 head annually. These producers finished 60% of their production in contract facilities. Over 90% of their marketings were under contract or were owned by a packer. These producers expressed a high level of satisfaction with hog production. Both they and their contract growers were satisfied with production contracts. These large producers were satisfied with their marketing contracts and planned to continue them in the future. The hog industry has changed a great deal in the last decade. There is little reason to believe this rapid rate of change will not continue. This swine industry is highly competitive and profit driven. Profit margins are too small to allow producers the luxury of ignoring new technology and innovative production systems. Consequently, hog production will continue its rapid evolution from traditional agriculture to typical industry.

Factors influencing consumption of farmed seafood products in the Pacific northwest.

Science.gov (United States)

Hall, Troy E; Amberg, Shannon M

2013-07-01

This study used a mail survey (n=1159 usable surveys) of Pacific northwest (US) residents to understand general seafood preferences (familiarity, price, freshness, health and environmental concerns), beliefs and attitudes specific to aquaculture versus wild products, and how those cognitive factors affect decisions to consume types of farmed seafood products. Respondents strongly agreed that seafood is healthy, and they preferred wild over farmed products. Many respondents were uncertain about human health and environmental benefits and problems associated with aquaculture. While there was agreement that aquaculture reduces pressure on wild fish, there was equally strong agreement that it has the same problems as other agricultural practices. Belief in the superiority of wild seafood was a strong predictor of consumption choices. Belief in the benefits of aquaculture was positively related to higher consumption of farmed products, but--unexpectedly--beliefs related to environmental and health problems associated with aquaculture did not predict specific consumption choices. Nearly half of respondents recalled hearing or reading about aquaculture in the mass media, and recall of negative stories contributed to a general preference for wild products, but not consumption of specific types of farmed products. Consumption of the different classes of products had some different predictors, and communication efforts directed at different beliefs may have different impacts on consumer behavior. Copyright © 2013. Published by Elsevier Ltd.

Product Configuration Systems - Implications for Product Innovation and Development

DEFF Research Database (Denmark)

Edwards, Kasper; Pedersen, Jørgen Lindgaard

2004-01-01

configurations. However, costs are but one parameter on which firms compete and firms must continually innovate new and develop existing products. This paper presents original empirical insights on implementation and use of product configuration systems in a number of Danish industrial firms. The paper discusses...... the organisational changes associated with PCS and how this affects product innovation and development. The paper begins by introducing product configuration systems, which are then placed in context to the firm as a process technology which coordinate different processes: product development, order acquisition......Product Configuration Systems (PCS) is a step in the direction of mass customization in the sense that PCS allows a firm to significantly lower the unit cost of configuration. Thus PCS is a valuable technology for lowering operating costs while retaining a high number of possible product...

Continuous esterification for biodiesel production from palm fatty acid distillate using economical process

Energy Technology Data Exchange (ETDEWEB)

Chongkhong, S.; Tongurai, C.; Chetpattananondh, P. [Department of Chemical Engineering, Faculty of Engineering, Prince of Songkla University, Hat-Yai, Songkhla 90112 (Thailand)

2009-04-15

An overflow system for continuous esterification of palm fatty acid distillate (PFAD) using an economical process was developed using a continuous stirred tank reactor (CSTR). Continuous production compared to batch production at the same condition had higher product purity. The optimum condition for the esterification process was a 8.8:1:0.05 molar ratio of methanol to PFAD to sulfuric acid catalyst, 60 min of residence time at 75 C under its own pressure. The free fatty acid (FFA) content in the PFAD was reduced from 93 to less than 1.5%wt by optimum esterification. The esterified product had to be neutralized with 10.24%wt of 3 M sodium hydroxide in water solution at a reaction temperature of 80 C for 20 min to reduce the residual FFA and glycerides. The components and properties of fatty acid methyl ester (FAME) could meet the standard requirements for biodiesel fuel. Eventually the production costs were calculated to disclose its commercialization. (author)

Tourism practices of Chinese residents in South Africa | Potgieter ...

African Journals Online (AJOL)

Chinese consumers are different due to their cultural background and way of life and this necessitates a conversion of the business model and products offered by leisure and tourism service providers. Very little is known about tourism practices of resident Chinese in South Africa. Research was conducted amongst resident ...

Hydrate prevention in petroleum production sub sea system

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, Paula L.F.; Rocha, Humberto A.R. [Universidade Estacio de Sa (UNESA), Rio de Janeiro, RJ (Brazil); Rodrigues, Antonio P. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

2012-07-01

In spite of the merits of the several hydrate prevention techniques used nowadays, such as: chemical product injection for inhibition and use of thick thermal insulate lines; hydrates per times happen and they are responsible for considerable production losses. Depressurization techniques can be used so much for prevention as in the remediation. Some hydrate removal techniques need a rig or vessel, resources not readily available and with high cost, reason that limits such techniques just for remediation and not for prevention. In the present work it is proposed and described an innovative depressurization system, remote and resident, for hydrate prevention and removal, applicable as for individual sub sea wells as for grouped wells by manifold. Based on low cost jet pumps, without movable parts and with a high reliability, this technique allows hydrate prevention or remediation in a fast and remote way, operated from the production unit. The power fluid line and fluid return line can be integrated in the same umbilical or annulus line structure, without significant increase in the construction costs and installation. It is not necessary to wait for expensive resource mobilization, sometimes not available quickly, such as: vessels or rigs. It still reduces the chemical product consumption and permits to depressurized stopped lines. Other additional advantage, depressurization procedure can be used in the well starting, removing fluid until riser emptying. (author)

Treatment of coaly substances. [production of soluble products

Energy Technology Data Exchange (ETDEWEB)

Janner, J; Gonre, O

1928-05-01

A process is described for the production of soluble products from coaly substances. The process consists of heating coal or the like under pressure, and if desired with the addition of gases or vapors which do not react to a substantial extent with the coaly matter under the conditions of working. The product may be treated with a solvent at an elevated temperature and under pressure, with or without the addition of said gases or vapors. The products obtained by the above process may be subjected to a further treatment, in particular a cracking process and/or a destructive hydrogenation. The products may also be separated by the aid of suitable solvents into resins, waxes, and other substances.

Productivity Sharing Programs: Can They Contribute to Productivity Improvement?

Science.gov (United States)

General Accounting Office, Washington, DC.

Productivity sharing plans were studied to determine how they operate, what benefits result, and whether long-term increases in productivity can be realized through the program. Thirty-six firms were interviewed that had productivity sharing plans. Nine firms that had either rejected adoption of a productivity sharing plan or were still…

Radiotracer investigation of phosphoric acid and phosphatic fertilizers production process

International Nuclear Information System (INIS)

Ben Abdelouahed, H.; Reguigui, N.

2011-01-01

In the phosphoric acid production process, the time a particle spends inside the chemical reactor (residence time) is of paramount importance to process engineers. Residence time distribution (RTD) gives information on the efficiency of the chemical reactor, on the efficiency of the process, and also the availabilities of the reactive volume for the reaction (active volume vs. dead volume). Traditionally, chemical engineers used chemical tracer to determine the RTD. However, first disadvantage is that the chemical tracer could not allow an online diagnosis: the samples containing chemical tracer have to go to a lab for analysis, second disadvantage is that the chemical tracer is less sensitive than radioactive ones because of its adsorption onto strata or its retention in rocks. Consequently, chemical tracer results are not always precise and cannot convincingly explain the multiple flow-path model. Radioactive tracers are the only tracers capable of measuring the active RTD with high degree of precision and give information on the internal recirculation rate. In this work, we will describe the application of radiotracer method for RTD measurement in the phosphoric acid production process and give results and discussion of each case encountered. (author)

STRATEGIES FOR INCREASING PRODUCTIVITY IN PRODUCTION SYSTEMS

Directory of Open Access Journals (Sweden)

Diego Pacheco

2014-05-01

Full Text Available The main objective of this article is to point a set of practical strategies that can be adopted to increase the capacity of constraints resources on production systems, when the constraint is inside the factory and not is in the market. To serve this purpose will be presented strategies based on best practices of the Theory of Constraints, Lean Manufacturing and Total Productive Maintenance. This article also presents the mains tools for the deployment of these methodologies. The survey results have provided an objective set of practical strategy that can be used to increase the capacity and productivity of production systems according to the needs of each manufacturing system.

Product Service Systems

DEFF Research Database (Denmark)

Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems......Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems...

A production system for computerized emergency procedures tracking

International Nuclear Information System (INIS)

Petrick, W.; Ng, K.; Stuart, C.; Cain, D.

1988-01-01

This paper describes a methodology used to implement a computerized Emergency Operating Procedures (EOP) tracking system based on artificial intelligence (AI) technologies. In AI parlance, the system is a production system in which the knowledge representation is a set of productions (IF-THEN rules) which are interpreted by an inference engine or rule interpreter. The inference engine looks for pattern matches in the rule premises which lead to a conclusion. This inferred conclusion is subsequently used in further pattern matches. By separating the knowledge representation from the inference engine, the system can readily accommodate changes to the written procedures. The system is written in the C language and is co-resident on the same computer as the Safety Parameter Display System (SPDS). The plant EOPs have been written in about 250 rules which are evaluated in less than one second using about 10-20% of the CPU. The conclusions are available to multiple users within seconds after a parameter value changes. The benefits achieved with this production rule system include compatibility with the written procedures used as the knowledge source, compatibility with control room instrumentation, compatibility with the SPDS, realtime performance, and efficient computer usage

An Intelligent Method of Product Scheme Design Based on Product Gene

Directory of Open Access Journals (Sweden)

Qing Song Ai

2013-01-01

Full Text Available Nowadays, in order to have some featured products, many customers tend to buy customized products instead of buying common ones in supermarket. The manufacturing enterprises, with the purpose of improving their competitiveness, are focusing on providing customized products with high quality and low cost as well. At present, how to produce customized products rapidly and cheaply has been the key challenge to manufacturing enterprises. In this paper, an intelligent modeling approach applied to supporting the modeling of customized products is proposed, which may improve the efficiency during the product design process. Specifically, the product gene (PG method, which is an analogy of biological evolution in engineering area, is employed to model products in a new way. Based on product gene, we focus on the intelligent modeling method to generate product schemes rapidly and automatically. The process of our research includes three steps: (1 develop a product gene model for customized products; (2 find the obtainment and storage method for product gene; and (3 propose a specific genetic algorithm used for calculating the solution of customized product and generating new product schemes. Finally, a case study is applied to test the usefulness of our study.

Protein-carbohydrate supplements in the production of meat products

Directory of Open Access Journals (Sweden)

I. N. Tolpigina

2013-01-01

Full Text Available Rationality of the use of protein-carbohydrate additive in the technology of meat products was justified. The capability of the fiber to stabilizate properties of meat systems was investigated. There was established permissible limits of the use of additives in prescription solutions in the production of sausage products of a various price level according to the criterion of biological values. The trial production of sausage products was held. By the methods of mathematical statistics were optimized compositions of protein-polysaccharide additives.

Emissions from laboratory combustor tests of manufactured wood products

Energy Technology Data Exchange (ETDEWEB)

Wilkening, R.; Evans, M.; Ragland, K. [Univ. of Wisconsin, Madison, WI (United States); Baker, A. [USDA Forest Products Lab., Madison, WI (United States)

1993-12-31

Manufactured wood products contain wood, wood fiber, and materials added during manufacture of the product. Manufacturing residues and the used products are burned in a furnace or boiler instead of landfilling. Emissions from combustion of these products contain additional compounds from the combustion of non-wood material which have not been adequately characterized to specify the best combustion conditions, emissions control equipment, and disposal procedures. Total hydrocarbons, formaldehyde, higher aldehydes and carbon monoxide emissions from aspen flakeboard and aspen cubes were measured in a 76 mm i.d. by 1.5 m long fixed bed combustor as a function of excess oxygen, and temperature. Emissions of hydrocarbons, aldehydes and CO from flakeboard and from clean aspen were very sensitive to average combustor temperature and excess oxygen. Hydrocarbon and aldehyde emissions below 10 ppM were achieved with 5% excess oxygen and 1,200{degrees}C average temperature for aspen flakeboard and 1,100{degrees}C for clean aspen at a 0.9 s residence time. When the average temperature decreased below these levels, the emissions increased rapidly. For example, at 950{degrees}C and 5% excess oxygen the formaldehyde emissions were over 1,000 ppM. These laboratory tests reinforce the need to carefully control the temperature and excess oxygen in full-scale wood combustors.

The delicate balance between soil production and erosion, and its role on landscape evolution

Energy Technology Data Exchange (ETDEWEB)

Dosseto, A., E-mail: tonyd@uow.edu.au [GeoQuEST Research Centre, School of Earth and Environmental Sciences, University of Wollongong. Wollongong, NSW (Australia); Buss, Heather [US Geological Survey. Menlo Park, CA (United States); Suresh, P.O. [Department of Environment and Geography, Macquarie University. North Ryde, NSW (Australia)

2011-06-15

Highlights: > The uranium-series isotope composition of regolith material can be used to determine the soil residence time. > Soil residence times up to 30 and 90 kyr are calculated for Frogs Hollow and Bisley, respectively. > Production rates are relatively similar for granitic and shale lithologies, but much higher over volcanic parent rock. > Soil production matches erosion in soil-mantled landscapes, demonstrating quantitatively that this type of landscape results from a balance between these two processes > Soil production is up to two orders of magnitude slower than erosion in cultivated areas. - Abstract: The diversity in landscapes at the Earth's surface is the result, amongst other things, of the balance (or imbalance) between soil production and erosion. While erosion rates are well constrained, it is only recently that we have been able to quantify rates of soil production. Uranium-series isotopes have been useful to provide such estimates independently of erosion rates. In this study, new U-series isotope are presented data from weathering profiles developed over andesitic parent rock in Puerto Rico, and granitic bedrock in southeastern Australia. The site in Australia is located on a highland plateau, neighbouring a retreating escarpment where soil production rates between 10 and 50 mm/kyr have been determined. The results show that production rates are invariant in these two regions of Australia with values between 15 and 25 mm/kyr for the new site. Andesitic soils show much faster rates, about 200 mm/kyr. Overall, soil production rates determined with U-series isotopes range between 10 and 200 mm/kyr. This is comparable to erosion rates in soil-mantled landscapes, but faster than erosion in cratonic areas and slower than in alpine regions and cultivated areas. This suggests that soil-mantled landscapes maintain soil because they can: there is a balance between production and erosion. Similarly, thick weathering profiles develop in cratonic areas

Tobacco Products

Science.gov (United States)

... Exposure is High in Multiunit Housing Smokeless Products Electronic Cigarettes Youth Tobacco Prevention Tobacco Products Tobacco Ingredient ... Tweet Share Compartir Find Fact Sheets on Products (Cigars, Bidis and Betel Quid with Tobacco (Gutka) and ...

Designing Product Families

DEFF Research Database (Denmark)

Pedersen, Per Erik Elgård; Miller, Thomas Dedenroth

1998-01-01

Manufacturing companies that operate with products aimed at different market segments and applications are experiencing an increasing demand from customers who expect products to be tailored to their exact needs rather than accepting general products based on average customer needs. This trend ha......: Variety, Design Principles, and Product Maturity.......Manufacturing companies that operate with products aimed at different market segments and applications are experiencing an increasing demand from customers who expect products to be tailored to their exact needs rather than accepting general products based on average customer needs. This trend has...... led to a new business paradigm, "mass customization", where companies strive to provide highly customized products while still maintaining the efficiency of the classical mass production enterprise. One of the key factors in mass customization has been efficient use of product platforms...

Product Family Assessment

DEFF Research Database (Denmark)

Kvist, Morten

their focus from single products to entire product families and try to incorporate the development of product variety into a future product family. The key is to create fit between the product design and production setup. The challenge of understanding this fit and modelling dispositional relations between...... and on the ideas of lean production, plus experiences from the industrial collaboration. The idea of waste from the lean philosophy is brought into a product variety context, and discussed in relation to product development. Verification of the model has been carried out in an industrial setting at Danfoss......This thesis reports the results of a PhD project from the Technical University of Denmark. The research has been carried out in a collaborative project with the Danish company Danfoss Automatic Controls. In the global market companies are struggling to meet customers’ expectation of products...

Product (RED)

DEFF Research Database (Denmark)

Ponte, Stefano

2011-01-01

) and the consumers who buy iconic brand products to help ‘distant others’. While in many other forms of causumerism, labels or certification systems ‘prove’ that a product is just, in RED, aid celebrities provide the proof. From the consumer point of view both labels and celebrities provide a similar simplification...... of complex social, economic, and environmental processes. At the same time, we argue that there are important distinctions as well—labels and certifications are ultimately about improving the conditions of production, whereas RED is about accepting existing production and trade systems and donating......(PRODUCT)RED™ (hereafter RED) is a cobranding initiative launched in 2006 by the aid celebrity Bono to raise money from product sales to support The Global Fund to Fight AIDS, Tuberculosis and Malaria. In this paper we argue that RED is shifting the boundaries of ‘causumerism’ (shopping...

Linking Forests and Fish: The Relationship Between Productivities of Salmonids and Forest Stands in Northern California

Science.gov (United States)

Wilzbach, P.; Frazey, S.

2005-05-01

Productivities of resident salmonid populations, upland, and riparian areas in 25 small watersheds of coastal northern California were estimated and compared to determine if: 1) upland site productivity predicted riparian site productivity; 2) either upland or riparian site productivity predicted salmonid productivity; and 3) other parameters explained more of the variance in salmonid productivity than upland or riparian site productivity. Salmonid productivity was indexed by total salmonid biomass, length of age 1 fish, and percent habitat saturation. Upland and riparian site productivities were estimated using site indices for redwood (Sequoia sempervirens) and red alder (Alnus rubra), respectively. Upland and riparian site indices were correlated, but neither factor contributed to the best approximating models of salmonid biomass or fish length at age one. Salmonid biomass was best described by a positive relationship with drainage area, and length at age was best described by a positive relationship with percent of riparian hardwoods. Percent habitat saturation was not well described by any of the models constructed. Lack of a relationship between upland conifer and salmonid productivity suggests that management of land for timber productivity and component streams for salmonid production in these sites will require separate, albeit integrated, strategies.

Home-based radiology transcription and a productivity pay plan.

Science.gov (United States)

Kerr, K

1997-01-01

Shands Hospital in Gainesville, Fla., decided to evaluate the way it provided transcription services in its radiology department. It identified four goals: increased productivity, decreased operating expense, finding much needed space in the radiology department and increasing employee morale. The department performs 165,000 procedures annually, with 66 radiologists, 29 faculty, and 37 residents and fellows on staff. Six FTEs comprised the transcription pool in the radiology department, with transcription their only duty. Transcriptionists were paid an hourly rate based on their years of service, not their productivity. Evaluation and measurement studies were undertaken by the hospital's management systems engineering department. The transcriptionists' hours were then changed to provide coverage during the periods of heaviest dictation. The productivity level of the transcription staff was also measured and various methods of measurement reviewed. The goal was a pure incentive pay plan that would reward employees for every increase in productivity. The incentive pay plan was phased in over a three-month period. Transcriptionists were paid for work performed, with no base pay beyond minimum wage. The move to home-based transcription was planned. The necessary equipment was identified and various issues specific to working at home were addressed. Approximately six months later, the transcriptionists were set up to work at home. The astounding results achieved are presented: 28% increase in productivity, operational cost savings exceeding $25,000 and a space savings of 238 square feet.

Production management (2000)

International Nuclear Information System (INIS)

Jung, Chung Yeong

2000-08-01

This book includes basic concept of production management, production system, strategy and mission of production, decision of production management, operation of decision making, life cycle of items and development, value of productions, design for reliability of productions, equipment layout and manufacturing process, quantitative forecast, schedule plan, inventory system, concept, input and output of MRP, Montekalo simulation, quality management, and automation system.

Orthogonal Views on Product/Service-System Design in an entire Industry Branch

DEFF Research Database (Denmark)

McAloone, Tim C.; Mougaard, Krestine; Neugebauer, Line Maria

2011-01-01

, understandings and approaches to PSS are still fluid. Much of the literature in the field of PSS has, until now, focused largely on the actual transition from product to PSS and has typically resided in the field of engineering design. Symptomatic of the current literature is the concept of service as the adding...

PRODUCTION OF CARBON PRODUCTS USING A COAL EXTRACTION PROCESS

Energy Technology Data Exchange (ETDEWEB)

Dady Dadyburjor; Philip R. Biedler; Chong Chen; L. Mitchell Clendenin; Manoj Katakdaunde; Elliot B. Kennel; Nathan D. King; Liviu Magean; Peter G. Stansberry; Alfred H. Stiller; John W. Zondlo

2004-08-31

This Department of Energy National Energy Technology Laboratory sponsored project developed carbon products, using mildly hydrogenated solvents to extract the organic portion of coal to create synthetic pitches, cokes, carbon foam and carbon fibers. The focus of this effort was on development of lower cost solvents, milder hydrogenation conditions and improved yield in order to enable practical production of these products. This technology is needed because of the long-term decline in production of domestic feedstocks such as petroleum pitch and coal tar pitch. Currently, carbon products represents a market of roughly 5 million tons domestically, and 19 million tons worldwide. Carbon products are mainly derived from feedstocks such as petroleum pitch and coal tar pitch. The domestic supply of petroleum pitch is declining because of the rising price of liquid fuels, which has caused US refineries to maximize liquid fuel production. As a consequence, the long term trend has a decline in production of petroleum pitch over the past 20 years. The production of coal tar pitch, as in the case of petroleum pitch, has likewise declined significantly over the past two decades. Coal tar pitch is a byproduct of metallurgical grade coke (metcoke) production. In this industry, modern metcoke facilities are recycling coal tar as fuel in order to enhance energy efficiency and minimize environmental emissions. Metcoke production itself is dependent upon the production requirements for domestic steel. Hence, several metcoke ovens have been decommissioned over the past two decades and have not been replaced. As a consequence sources of coal tar are being taken off line and are not being replaced. The long-term trend is a reduction in coal tar pitch production. Thus import of feedstocks, mainly from Eastern Europe and China, is on the rise despite the relatively large transportation cost. To reverse this trend, a new process for producing carbon products is needed. The process must be

Life cycle assessment and sustainability analysis of products, materials and technologies. Toward a scientific framework for sustainability life cycle analysis

NARCIS (Netherlands)

Heijungs, Reinout; Huppes, Gjalt; Guinée, Jeroen B.

There are many approaches to study the environmental and sustainability aspects of production and consumption. Some of these reside at the level of concepts, e.g., industrial ecology, design for environment, and cleaner production. Other approaches are based on the use of quantitative models, e.g.,

Productivity improvement with green approach to palm oil factory productivity

Science.gov (United States)

Matondang, N.

2018-02-01

The palm oil factory (POF) processes fresh fruit bunches into crude palm oil (CPO) and palm kernel oil (PKO) by products in the form of liquid and solid waste. One of the solid wastes produced in POF Tanjung Kasau is empty fruit bunches of palm oil (FBPO) which have been burned completely on incinerator tubes so that potentially produces pollutants that pollute the environment. If FBPO waste is managed properly, it will improve the productivity of the company. Therefore, it is necessary to conduct a study to find out how far the increased productivity of the company can reduce their impact on the environment, if FBPO is used as raw material of liquid smoke. The productivity improvement approach is done by Green Productivity concept, by looking at three aspects: environmental, social and economical. Green Productivity aims to protect the environment simultaneously by increasing the productivity of the company. One way is to turn FBPO waste into liquid smoke product is by pyrolysis process. The results showed that turning FBPO solid waste into liquid smoke will increase productivity by 18.18%. Implementation of Green Productivity can improve productivity through the improvement of FBPO waste treatment process which has been done by perfect combustion by pyrolysis process so that waste can be minimized to create environment industry POF clean and friendly environment.

Numerical modelling of ozone production in a wire-cylinder corona discharge and comparison with a wire-plate corona discharge

International Nuclear Information System (INIS)

Wang Pengxiang; Chen Junhong

2009-01-01

The effect of electrode configuration on ozone production in the direct-current corona discharge of dry and humid air is studied by a numerical model that combines the electron distribution in the corona plasma, plasma chemistry and transport phenomena. Two electrode configurations are considered: wire-cylinder discharge with air flowing along the wire axis and wire-plate discharge with air flowing transverse to the wire. The ozone distributions in both types of discharges are compared. For both electrode configurations, the ozone production rate is higher in the negative corona than in the positive corona and it decreases with an increase in relative humidity. More importantly, the detailed ozone distribution in the neighbourhood of the discharge wire, together with the ozone kinetics, reveals the possible difference in the ozone production from the two discharges. With the same operating conditions and sufficiently short flow residence time, the ozone production rate is nearly the same for both electrode configurations. When the flow residence time is longer than the characteristic time for homogeneous ozone destruction, the net ozone production is higher in the wire-cylinder discharge than in the wire-plate discharge due to relatively less ozone destruction.

Numerical modelling of ozone production in a wire-cylinder corona discharge and comparison with a wire-plate corona discharge

Science.gov (United States)

Wang, Pengxiang; Chen, Junhong

2009-02-01

The effect of electrode configuration on ozone production in the direct-current corona discharge of dry and humid air is studied by a numerical model that combines the electron distribution in the corona plasma, plasma chemistry and transport phenomena. Two electrode configurations are considered: wire-cylinder discharge with air flowing along the wire axis and wire-plate discharge with air flowing transverse to the wire. The ozone distributions in both types of discharges are compared. For both electrode configurations, the ozone production rate is higher in the negative corona than in the positive corona and it decreases with an increase in relative humidity. More importantly, the detailed ozone distribution in the neighbourhood of the discharge wire, together with the ozone kinetics, reveals the possible difference in the ozone production from the two discharges. With the same operating conditions and sufficiently short flow residence time, the ozone production rate is nearly the same for both electrode configurations. When the flow residence time is longer than the characteristic time for homogeneous ozone destruction, the net ozone production is higher in the wire-cylinder discharge than in the wire-plate discharge due to relatively less ozone destruction.

The use of sanitation products in milk and cheese production

Directory of Open Access Journals (Sweden)

Samir Kalit

2001-06-01

Full Text Available Considering hygienic conditions in cheese production the aim of thispaper was to investigate the influence of using some sanitation* products in milk and cheese production on family farms. This investigation was a part of the project “Improving the quality of Tounj cheese produced on family farms”. By use of the sanitation products, during milk production, significant (P<0.01 decrease of geometrical mean of total bacterial count from 3.54 x 105 to 8 x 103 in mL of milk, as well as significant (P<0.01 decrease of geometric mean of somatic cell count from 3.1 x 105 to 2.4 x 105 in mL of milk was observed. The ratio of hygienically unacceptable cheeses, according to the Regulations of microbial standards for foods (NN 46/94., significantly (P<0.01 decreased as well. Because of the new requests and standards, the sanitation products are more in use in both milk and cheese production on family farms. Investigated sanitation products were suitable for use in milk and Tounj cheese production.

Feasibility of an innovative third-year chief resident system: an internal medicine residency leadership study

Directory of Open Access Journals (Sweden)

Victor O. Kolade

2014-07-01

Full Text Available Introduction: The role of the internal medicine chief resident includes various administrative, academic, social, and educational responsibilities, fulfillment of which prepares residents for further leadership tasks. However, the chief resident position has historically only been held by a few residents. As fourth-year chief residents are becoming less common, we considered a new model for rotating third-year residents as the chief resident. Methods: Online surveys were given to all 29 internal medicine residents in a single university-based program after implementation of a leadership curriculum and specific job description for the third-year chief resident. Chief residents evaluated themselves on various aspects of leadership. Participation was voluntary. Descriptive statistics were generated using SPSS version 21. Results: Thirteen junior (first- or second-year resident responses reported that the chief residents elicited input from others (mean rating 6.8, were committed to the team (6.8, resolved conflict (6.7, ensured efficiency, organization and productivity of the team (6.7, participated actively (7.0, and managed resources (6.6. Responses from senior residents averaged 1 point higher for each item; this pattern repeated itself in teaching evaluations. Chief resident self-evaluators were more comfortable running a morning report (8.4 than with being chief resident (5.8. Conclusion: The feasibility of preparing internal medicine residents for leadership roles through a rotating PGY-3 (postgraduate year chief residency curriculum was explored at a small internal medicine residency, and we suggest extending the study to include other programs.

Emulsified Water Products

Directory of Open Access Journals (Sweden)

Elif Tuğçe AKSUN

2016-12-01

Full Text Available Seafood is very important depending on having high protein rate and easily digestibility by human, for supply to an important part of animal protein needed. Determining the quality of emulsion-type products, emulsion stability, viscosity and gel strength properties are very important. In the production of products specified in this property emulsion; the main protein ratio and properties of raw material used while you; emulsion pH, temperature, ionic violence, mixing speed, type of fat and additives that are used as well. Previous studies show that particularly of products resulting from water emulsified chicken and goat meat emulsified product obtained from a high capacity of emulsified and compared to cattle and sheep meat is close to specifications, preparation of emulsified type products may be appropriate for the use of fish meat. Another quality parameter in the emulsified meat products, viscosity depends on the amount of meat used in direct proportion with the texture. Fish meat animals in connective tissue connective tissue in meat other butchers to rate ratio is quite low. In this respect, the fish meat produced using emulsified products viscosity according to products prepared using other meat products is quite low. Fish meat produced using emulsified fish sausage products based on surimi, sausage and fish pate fish varieties classed emulsion type products. In this review the different types of seafood using emulsified meat product.

Exposure to firework chemicals from production factories in pregnant women and risk of preterm birth occurrence in Liuyang, China.

Science.gov (United States)

Li, Xun; Tan, Hongzhuan; Luo, Meiling; Wu, Xinrui; Huang, Xin; Zhou, Shujin; Shen, Lin; He, Yue; Liu, Yi; Hu, Li; Chen, Mengshi; Hu, Shimin; Wen, Shi Wu

2018-01-01

In the production of fireworks, various pollutants including particles of metals and organic compounds are released into the environment. Although the adverse effects of these air pollutants are known, the impact on pregnant women residing in this area remains to be determined. The aim of this study was to examine the association between maternal exposure to fireworks production chemicals and frequency of preterm birth in Liuyang, China. Maternal exposure to fireworks production was estimated at the residential district level and assessed using factory density, which was defined as the number of fireworks factories per 1000 residents in each district. The association of maternal exposure to particulates released from fireworks production plants with frequency of preterm birth was determined using data obtained from a cohort study conducted in Liuyang, China. Data were analyzed utilizing linear regression and logistic regression. There was no significant association between factory density and spontaneous preterm or medically induced preterm birth. Unexpectedly, pregnant women residing in areas with higher density of fireworks factories were at a reduced risk of preterm premature rupture of membranes (PPROM). Data demonstrated that residential density of fireworks factories appeared to be negatively correlated with preterm birth rate as evidenced by PPROM. At present, it is difficult to reconcile the inverse relationship between firework chemical exposure and frequency of preterm births as ambient particulate inhalation is known to adversely affect preterm birth occurrence.

Designer-made meat and dairy products: Consumer-led product development

DEFF Research Database (Denmark)

Grunert, Klaus G.; Valli, Carlotta

2001-01-01

targeting these segments were derived and tested with consumers from these segments. Results show considerable potential for the development of food products which are differentiated in a consumer-based way. The paper closes with a step-model for consumer-led product development adapted to the current state...... of branding and differentiation in the product category.......Consumers differ in the kind of qualities they expect from food products, and they also differ in the way they infer quality from the product information available. Nevertheless, much product innovation in the food sector is still not geared towards specific consumer segments. This is especially...

Designer made meat and dairy products: Consumer-led product development

DEFF Research Database (Denmark)

Grunert, Klaus G.; Valli, Carlotta

targeting these segments were derived and tested with consumers from these segments. Results show considerable potential for the development of food products which are differentiated in a consumer-based way. The paper closes with a step-model for consumer-led product development adapted to the current state...... of branding and differentiation in the product category.......Consumers differ in the kind of qualities they expect from food products, and they also differ in the way they infer quality from the product information available. Nevertheless, much product innovation in the food sector is still not geared towards specific consumer segments. This is especially...

Green product development : What does the country product space imply?

NARCIS (Netherlands)

Fraccascia, Luca; Giannoccaro, Ilaria; Albino, Vito

This paper contributes to green product development by identifying the green products with the highest potential for growth in a country. To address our aim, we use the concept of product proximity and product space and, borrowing from the results of recent studies on complexity economics, we

Proactive Modeling of Market, Product and Production Architectures

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hansen, Christian Lindschou; Hvam, Lars

2011-01-01

This paper presents an operational model that allows description of market, products and production architectures. The main feature of this model is the ability to describe both structural and functional aspect of architectures. The structural aspect is an answer to the question: What constitutes...... the architecture, e.g. standard designs, design units and interfaces? The functional aspect is an answer to the question: What is the behaviour or the architecture, what is it able to do, i.e. which products at which performance levels can be derived from the architecture? Among the most important benefits...... of this model is the explicit ability to describe what the architecture is prepared for, and what it is not prepared for - concerning development of future derivative products. The model has been applied in a large scale global product development project. Among the most important benefits is contribution to...

Effect of important operating parameters on product properties and operation of HDPE slurry reactor

International Nuclear Information System (INIS)

Soltanieh, M.; Remezani Saadat Abadi, A.; Dashti, A.; Mokhtari, J.

2007-01-01

In this article, a complete model for the mixed flow slurry reactor for polymerization of ethylene to high density polyethylene in the presence of Ziegler-Natta catalyst is presented. In addition to the effects of the multiple active sites, the effect of other important parameters such as the catalyst concentration, co-catalyst, hydrogen, monomer, impurities and pressure on the mass-average and number-average polymer product chain length, the average product distribution index and the required residence time for the reactor were investigated. The simulation results show that as the catalyst, hydrogen and solvent concentrations increase, the mass and number-average polymer chain length decrease, whereas with increasing monomer concentration and pressure, the average molecular weight increases. The effects of these parameters on the polydispersity index and residence time do not follow the same trend and their relationship changes in some of these variables

Microstructured reactors for hydrogen production

Energy Technology Data Exchange (ETDEWEB)

Aartun, Ingrid

2005-07-01

Small scale hydrogen production by partial oxidation (POX) and oxidative steam reforming (OSR) have been studied over Rh-impregnated microchannel Fecralloy reactors and alumina foams. Trying to establish whether metallic microchannel reactors have special advantages for hydrogen production via catalytic POX or OSR with respect to activity, selectivity and stability was of special interest. The microchannel Fecralloy reactors were oxidised at 1000 deg C to form a {alpha}-Al2O3 layer in the channels in order to enhance the surface area prior to impregnation. Kr-BET measurements showed that the specific surface area after oxidation was approximately 10 times higher than the calculated geometric surface area. Approximately 1 mg Rh was deposited in the channels by impregnation with an aqueous solution of RhCl3. Annular pieces (15 mm o.d.,4 mm i.d., 14 mm length) of extruded {alpha}-Al2O3 foams were impregnated with aqueous solutions of Rh(NO3)3 to obtain 0.01, 0.05 and 0.1 wt.% loadings, as predicted by solution uptake. ICP-AES analyses showed that the actual Rh loadings probably were higher, 0.025, 0.077 and 0.169 wt.% respectively. One of the microchannel Fecralloy reactors and all Al2O3 foams were equipped with a channel to allow for temperature measurement inside the catalytic system. Temperature profiles obtained along the reactor axes show that the metallic microchannel reactor is able to minimize temperature gradients as compared to the alumina foams. At sufficiently high furnace temperature, the gas phase in front of the Rh/Al2O3/Frecralloy microchannel reactor and the 0.025 wt.% Rh/Al2O3 foams ignites. Gas phase ignition leads to lower syngas selectivity and higher selectivity to total oxidation products and hydrocarbon by-products. Before ignition of the gas phase the hydrogen selectivity is increased in OSR as compared to POX, the main contribution being the water-gas shift reaction. After gas phase ignition, increased formation of hydrocarbon by-products

Mean annual precipitation predicts primary production resistance and resilience to extreme drought.

Science.gov (United States)

Stuart-Haëntjens, Ellen; De Boeck, Hans J; Lemoine, Nathan P; Mänd, Pille; Kröel-Dulay, György; Schmidt, Inger K; Jentsch, Anke; Stampfli, Andreas; Anderegg, William R L; Bahn, Michael; Kreyling, Juergen; Wohlgemuth, Thomas; Lloret, Francisco; Classen, Aimée T; Gough, Christopher M; Smith, Melinda D

2018-04-27

Extreme drought is increasing in frequency and intensity in many regions globally, with uncertain consequences for the resistance and resilience of ecosystem functions, including primary production. Primary production resistance, the capacity to withstand change during extreme drought, and resilience, the degree to which production recovers, vary among and within ecosystem types, obscuring generalized patterns of ecological stability. Theory and many observations suggest forest production is more resistant but less resilient than grassland production to extreme drought; however, studies of production sensitivity to precipitation variability indicate that the processes controlling resistance and resilience may be influenced more by mean annual precipitation (MAP) than ecosystem type. Here, we conducted a global meta-analysis to investigate primary production resistance and resilience to extreme drought in 64 forests and grasslands across a broad MAP gradient. We found resistance to extreme drought was predicted by MAP; however, grasslands (positive) and forests (negative) exhibited opposing resilience relationships with MAP. Our findings indicate that common plant physiological mechanisms may determine grassland and forest resistance to extreme drought, whereas differences among plant residents in turnover time, plant architecture, and drought adaptive strategies likely underlie divergent resilience patterns. The low resistance and resilience of dry grasslands suggests that these ecosystems are the most vulnerable to extreme drought - a vulnerability that is expected to compound as extreme drought frequency increases in the future. Copyright © 2018. Published by Elsevier B.V.

Developing and promoting OKP production system: a JIT production planning approach

Science.gov (United States)

Samavati, Mehran

2011-10-01

The role of production in competitive system of market on one hand and the changing conditions of market on the other hand has caused the need for more developed planning in such environments. The general purpose of the present research is to realize One-of- a- Kind- Product model (OKP) that is developed in two stages. In OKP model presented in 1994 only one sample of each product is produced and only one production method is considered for each product. In order to make OKP model more real and to use it in promoting more production methods, the following developments were made in this research: 1-First Development: Considering various methods for producing each product. 2-Second Development: Producing more than one sample of each product, while considering various production methods for each product. These models promoted OKP model of 1994. They can be used in more diversified production methods in order to promote them. In present model, while describing the main OKP model new models are provided as well. The significance of OKP has been described in Introduction

Estimating product-to-product variations in metal forming using force measurements

Science.gov (United States)

Havinga, Jos; van den Boogaard, Ton

2017-10-01

The limits of production accuracy of metal forming processes can be stretched by the development of control systems for compensation of product-to-product variations. Such systems require the use of measurements from each semi-finished product. These measurements must be used to estimate the final quality of each product. We propose to predict part of the product-to-product variations in multi-stage forming processes based on force measurements from previous process stages. The reasoning is that final product properties as well as process forces are expected to be correlated since they are both affected by material and process variation. In this study, an approach to construct a moving window process model based on historical data from the process is presented. These regression models can be built and updated in real-time during production. The approach is tested with data from a demonstrator process with cutting, deep drawing and bending stages. It is shown that part of the product-to-product variations in the process can be predicted with the developed process model.

Biocidal Products and Borderline Products

OpenAIRE

Yılmaz, Abdullah

2015-01-01

Biocidal product is defined as preparations sold in ready form to use that contains one or more active substances and has control effect, movement restriction or destruction against harmful organisms which has harmful effect on products that people use or produce or animals or environment. These substances which are composed mostly chemicals and ease our lifes are used in increasingly every areas of our life on the other hand they carry variety of risks and threaten our lives. In terms of env...

Product quality of parenteral vancomycin products in the United States.

Science.gov (United States)

Nambiar, S; Madurawe, R D; Zuk, S M; Khan, S R; Ellison, C D; Faustino, P J; Mans, D J; Trehy, M L; Hadwiger, M E; Boyne, M T; Biswas, K; Cox, E M

2012-06-01

In response to concerns raised about the quality of parenteral vancomycin products, the U.S. Food and Drug Administration (FDA) is investigating the product quality of all FDA-approved parenteral vancomycin products available in the United States. Product quality was evaluated independently at two FDA Office of Testing and Research (FDA-OTR) sites. In the next phase of the investigation, being done in collaboration with the National Institute of Allergy and Infectious Diseases, the in vivo activity of these products will be evaluated in an appropriate animal model. This paper summarizes results of the FDA investigation completed thus far. One site used a validated ultrahigh-pressure liquid chromatography method (OTR-UPLC), and the second site used the high-performance liquid chromatography (HPLC) method for related substances provided in the British Pharmacopeia (BP) monograph for vancomycin intravenous infusion. Similar results were obtained by the two FDA-OTR laboratories using two different analytical methods. The products tested had 90 to 95% vancomycin B (active component of vancomycin) by the BP-HPLC method and 89 to 94% vancomycin by OTR-UPLC methods. Total impurities were 5 to 10% by BP-HPLC and 6 to 11% by OTR-UPLC methods. No single impurity was >2.0%, and the CDP-1 level was ≤ 2.0% across all products. Some variability in impurity profiles of the various products was observed. No adverse product quality issues were identified with the six U.S. vancomycin parenteral products. The quality parameters of all parenteral vancomycin products tested surpassed the United States Pharmacopeia acceptance criteria. Additional testing will characterize in vivo performance characteristics of these products.

SaferProducts API

Data.gov (United States)

US Consumer Product Safety Commission — On March 11, 2011, the U.S. Consumer Product Safety Commission launched SaferProducts.gov. This site hosts the agency's new Publicly Available Consumer Product...

Innovation in Product Development

DEFF Research Database (Denmark)

McAloone, Tim C.; Restrepo-Giraldo, John Dairo

2005-01-01

The course on Innovation in Product Development attempts to identify and understand the nature of innovation and product development and their important factors. The course takes both a theoretical and a practical approach and employs a mix of lectures, project work and group discussion. Format...... insight. Course content The following aspects of innovation in product development are considered: - Humans and products - Needs and products - Product life - Teams creating products - Products creating business - Product development models - Organising product development - Product development tools...... - The future of product development....

Lot-sizing for a single-stage single-product production system with rework of perishable production defectives

NARCIS (Netherlands)

Teunter, R.; Flapper, S.D.P.

2003-01-01

We consider a single-stage single-product production system. Produced units may be non-defective, reworkable defective, or non-reworkable defective. The system switches between production and rework. After producing a fixed number (N) of units, all reworkable defective units are reworked. Reworkable

Food production and consumption near the Savannah River Site

Energy Technology Data Exchange (ETDEWEB)

Hamby, D.M.

1991-12-31

Routine operations at the Savannah River Site (SRS) result in the release of radionuclides to the atmosphere and to the Savannah River. The resulting radiological doses to the off-site maximum individual and the 80-km population are estimated on a yearly basis. These estimates are generated using dose models prescribed in the NRC Reg. Guide 1.109 for the commercial nuclear power industry. A study of land and water usage characteristics in the region of the Savannah River Site has been conducted to determine site-specific values of the NRC dose model parameters. The study`s scope included local characteristics of meat, milk, vegetable production; Savannah River recreational activities and fish harvests; meat, milk, vegetable, and seafood consumption rates; and Savannah River drinking-water populations. Average and maximum consumption rates of beef, milk, vegetables, and fish have been determined for individuals residing in the southern United States. The study suggest that many of the consumption rates provided by the NRC may not be appropriate for residents of the South. Average consumption rates are slightly higher than the defaults provided by the NRC. Maximum consumption rates, however, are typically lower than NRC values. Agricultural productivity in the SRS region was found to be quite different than NRC recommendations. Off-site doses have been predicted using both NRC and SRS parameter values to demonstrate the significance of site-specific data.

Food production and consumption near the Savannah River Site

Energy Technology Data Exchange (ETDEWEB)

Hamby, D.M.

1991-01-01

Routine operations at the Savannah River Site (SRS) result in the release of radionuclides to the atmosphere and to the Savannah River. The resulting radiological doses to the off-site maximum individual and the 80-km population are estimated on a yearly basis. These estimates are generated using dose models prescribed in the NRC Reg. Guide 1.109 for the commercial nuclear power industry. A study of land and water usage characteristics in the region of the Savannah River Site has been conducted to determine site-specific values of the NRC dose model parameters. The study's scope included local characteristics of meat, milk, vegetable production; Savannah River recreational activities and fish harvests; meat, milk, vegetable, and seafood consumption rates; and Savannah River drinking-water populations. Average and maximum consumption rates of beef, milk, vegetables, and fish have been determined for individuals residing in the southern United States. The study suggest that many of the consumption rates provided by the NRC may not be appropriate for residents of the South. Average consumption rates are slightly higher than the defaults provided by the NRC. Maximum consumption rates, however, are typically lower than NRC values. Agricultural productivity in the SRS region was found to be quite different than NRC recommendations. Off-site doses have been predicted using both NRC and SRS parameter values to demonstrate the significance of site-specific data.

Product Stigmaticity : Understanding, Measuring and Managing Product-Related Stigma

NARCIS (Netherlands)

Vaes, K.

2014-01-01

Stigma-free Product Design. Many of the products intended to relieve us from discomforting or unsafe situations and many medical and assistive devices are experienced as unpleasant and uncomfortable. On top of their discomfort, product users may also experience social unease from the people around

Prevalence of the tobacco product dokha among high school students in Dubai.

Science.gov (United States)

Crookes, Annie; Wolff, Kim

2014-08-01

Dokha is a mixed tobacco product, smoked through a pipe, traditional in Arabic culture and popular in the UAE. User forums suggest this product may contain higher levels of nicotine and potentially psychoactive properties. However, there have been few published studies on dokha prevalence and health effects. The present study provides initial data on prevalence of use among high school students resident in Dubai, UAE. 416 students were recruited from five English curriculum schools. Respondents completed a questionnaire measuring current and lifetime use of tobacco in the form of cigarettes, water-pipes and dokha. Current tobacco users completed the 'Hooked on Nicotine Checklist for signs of dependency. Data from 394 subjects were analyzed with mean age 16.9 years. Regular use (weekly or daily) of tobacco had relatively high prevalence (23.4%) compared to international data and was driven by use of the local tobacco, dokha. Dokha forms a commonly used tobacco product among young people in the UAE from both Arab and Western national groups. Little is currently known about the health and dependence risks of this product. The paper adds to the few studies calling for timely research into this and other emerging tobacco products.

Optimizing the order processing of customized products using product configuration

DEFF Research Database (Denmark)

Hvam, Lars; Bonev, Martin; Denkena, B.

2011-01-01

. Product configuration based on integrated modular product structure and product family architecture has been recognized as an effective means for implementing mass customization. In order to evaluate the effects of product configuration on order processing, a study has been conducted by the Department...... and its benefits for the order processing have been evaluated....

Fickle product mix: Exporters adapting their product vectors across markets

OpenAIRE

Fontagné, Lionel; Secchi, Angelo; Tomasi, Chiara

2014-01-01

This paper analyzes how multi-product firms adjust their exported product-mix across desti- nations. Using cross sections of Italian and French data, we show that firms do not follow a rigid ordering in their product mix exported in different markets but rather they adapt their choices to better match with country characteristics. By using metrics based on export shares and on sequences of product names we provide new insights on the extent a firm's products portfolio changes across destinati...

[Service productivity in hospital nursing--conceptual framework of a productivity analysis].

Science.gov (United States)

Thomas, D; Borchert, M; Brockhaus, N; Jäschke, L; Schmitz, G; Wasem, J

2015-01-01

Decreasing staff numbers compounded by an increasing number of cases is regarded as main challenge in German hospital nursing. These input reductions accompanied by output extensions imply that hospital nursing services have had to achieve a continuous productivity growth in the recent years. Appropriately targeted productivity enhancements require approved and effective methods for productivity acquisition and measurement. However, there is a lack of suitable productivity measurement instruments for hospital nursing services. This deficit is addressed in the present study by the development of an integrated productivity model for hospital nursing services. Conceptually, qualitative as well as quantitative aspects of nursing services productivity are equally taken into consideration. Based on systematic literature reviews different conceptual frameworks of service productivity and the current state of research in hospital nursing services productivity were analysed. On this basis nursing sensitive inputs, processes and outputs were identified and integrated into a productivity model. As an adequate framework for a hospital nursing services productivity model the conceptual approach by Grönroos/Ojasalo was identified. The basic structure of this model was adapted stepwise to our study purpose by integrating theoretical and empirical findings from the research fields of service productivity, nursing productivity as well as national and international nursing research. Special challenges existed concerning the identification of relevant influencing factors as well as the representation of nursing sensitive outputs. The final result is an integrated productivity model, which can be used as an adequate framework for further research in hospital nursing productivity. Research on hospital nursing services productivity is rare, especially in Germany. The conceptual framework developed in this study builds on established knowledge in service productivity research. The

Applying environmental product design to biomedical products research.

Science.gov (United States)

Messelbeck, J; Sutherland, L

2000-12-01

The principal themes for the Biomedical Research and the Environment Conference Committee on Environmental Economics in Biomedical Research include the following: healthcare delivery companies and biomedical research organizations, both nonprofit and for-profit, need to improve their environmental performance; suppliers of healthcare products will be called upon to support this need; and improving the environmental profile of healthcare products begins in research and development (R&D). The committee report begins with requirements from regulatory authorities (e.g., U.S. Environmental Protection Agency [EPA], the U.S. Food and Drug Administration), and the healthcare delivery sector). The 1998 American Hospital Association and EPA Memorandum of Understanding to reduce solid waste and mercury from healthcare facilities is emblematic of these requirements. The dominant message from the requirements discussion is to ensure that R&D organizations do not ignore customer, environmental, and regulatory requirements in the early stages of product development. Several representatives from healthcare products manufacturers presented their companies' approaches to meeting these requirements. They reported on efforts to ensure that their R&D processes are sensitive to the environmental consequences from manufacturing, distributing, using, and disposing of healthcare products. These reports describe representatives' awareness of requirements and the unique approaches their R&D organizations have taken to meet these requirements. All representatives reported that their R&D organizations have embraced environmental product design because it avoids the potential of returning products to R&D to improve the environmental profile. Additionally, several reports detailed cost savings, sustainability benefits, and improvements in environmental manufacturing or redesign, and increased customer satisfaction. Many companies in healthcare delivery are working to improve environmental

Preparing for Automated Derivation of Products in a Software Product Line

National Research Council Canada - National Science Library

McGregor, John D

2005-01-01

... to bring a product to market, or through other production improvements. Business goals such as these make automated product derivation an appealing strategy to a software product line organization...

Radioactivity distribution in phosphate products, by-products, effluents, and wastes

International Nuclear Information System (INIS)

Guimond, R.J.; Windham, S.T.

1975-08-01

Phosphate rock throughout the world contains uranium in concentrations ranging from a few ppM to a few hundred ppM. In the United States, phosphate rock normally contains between 100 to 150 ppM uranium. Mining and processing of these ores redistributes much of the uranium daughters among the various products, by-products, and wastes. These materials are then widely dispersed throughout the environment. This redistribution may lead to increased exposure of the public to these naturally-occurring radionuclides. In determining the magnitude of the population exposure caused by this redistribution and in developing environmental standards and controls to prevent contamination of the biosphere from these naturally-occurring radionuclides it is necessary to determine the concentrations and total quantities of these radionuclides in the products, by-products, effluents and wastes of phosphate mining and manufacturing. Samples of phosphate ores, products, by-products, effluents, and wastes were obtained and analyzed for their radioactivity content. Quantities of radioactivity entering the environment through various products, by-products, effluents, and wastes were estimated

The Impacts of Country-of-origin, Product Involvement, and Product Familiarity on Product Evaluation

OpenAIRE

Nugroho, Sahid Susilo; Rostiani, Rokhima; Gitosudarmo, Indriyo

2014-01-01

One of the most interesting phenomena in global business is the existence of a product’scountry-of-origin (COO). COO as an informational cue has been proven to affect consumer’spurchasing decisions in terms of their perception towards the product’s attributes as well astheir overall evaluation of the product. The objective of this study is to investigate the impacts ofcountry-of-origin on product evaluation in the Indonesian market by considering consumers’product familiarity and consumers’ p...

Comparison of Authorization/Registration/Notification Processes among Biocidal Products, Cosmetics, Plant Protection Products and Human Medicinal Products

OpenAIRE

Söyleriz, Yüksel

2015-01-01

In this study, comparison of the authorization/registration/notification processes of biocidal products, cosmetics, plant protection products and medicinal products are made and in this respect, the situation in EU is assessed.

Productivity analysis of sunflower production in Turkey

International Nuclear Information System (INIS)

Semerci, A.

2012-01-01

In Turkey, which ranks the tenth country worldwide in the sunflower (Helianthus annuus L.) production, 55% of the production is carried out in Thrace Region. Therefore, agricultural enterprises in Thrace Region, situated in the European part of Turkey have specialized in producing sunflower, and have become the centre of vegetable oil industry in the region in terms of produced raw material. This research was conducted in 182 agricultural enterprises in 3 provinces of Thrace Region in Turkey and its objective was to determine input/output relations in sunflower production. The study indicates that the determination coefficient (r/sup 2/) derived from Cobb-Douglas production function was significant at 0.01 level and the elasticity coefficients of the variables (except chemical fertilizer) were found beta i positive in derived equation. It was determined that the variable of herbicide cost had the highest value of the marginal effectiveness coefficients and none of the variables was used at economically optimal level in the study area. When the Marginal Technical Substitution and the Price Rates were taken into consideration, it was noted that only the seed cost/hoeing cost was closest to economically optimum level (1.10). According to stepwise analysis the Land Renting Value was determined as the most important variable in sunflower production. (author)

Productive and Re-Productive Thinking in Solving Insight Problems

Science.gov (United States)

Cunningham, J. Barton; MacGregor, James N.

2014-01-01

Many innovations in organizations result when people discover insightful solutions to problems. Insightful problem-solving was considered by Gestalt psychologists to be associated with productive, as opposed to re-productive, thinking. Productive thinking is characterized by shifts in perspective which allow the problem solver to consider new,…

BRAND - PRODUCT INTERDEPENDENCE

Directory of Open Access Journals (Sweden)

Tudor NISTORESCU

2014-06-01

Full Text Available In this paper we conceptually discussed the brands’ role in the society, the dimensions of branding and the relationship between the brand and the products. We adhere to the main ideas expressed in the literature, that the brand is more than a product. However the product is needed to render the brand tangible. The product is the magic box that delivers the brand experience. Without the product, the brand meaning would have difficulties in attracting customers. More studies are needed to investigate the brand-product relationship.

Defining Product Intake Fraction to Quantify and Compare Exposure to Consumer Products.

Science.gov (United States)

Jolliet, Olivier; Ernstoff, Alexi S; Csiszar, Susan A; Fantke, Peter

2015-08-04

There is a growing consciousness that exposure studies need to better cover near-field exposure associated with products use. To consistently and quantitatively compare human exposure to chemicals in consumer products, we introduce the concept of product intake fraction, as the fraction of a chemical within a product that is eventually taken in by the human population. This metric enables consistent comparison of exposures during consumer product use for different product-chemical combinations, exposure duration, exposure routes and pathways and for other life cycle stages. We present example applications of the product intake fraction concept, for two chemicals in two personal care products and two chemicals encapsulated in two articles, showing how intakes of these chemicals can primarily occur during product use. We demonstrate the utility of the product intake fraction and its application modalities within life cycle assessment and risk assessment contexts. The product intake fraction helps to provide a clear interface between the life cycle inventory and impact assessment phases, to identify best suited sentinel products and to calculate overall exposure to chemicals in consumer products, or back-calculate maximum allowable concentrations of substances inside products.

Some aspects of radon and its daughter-products in man and his environment

International Nuclear Information System (INIS)

Rundo, J.; Markun, F.; Plondke, N.J.; Sha, J.Y.

1981-01-01

A major but short-lived postprandial increase in the exhalation rate of radon by persons containing no radium was observed. The concentrations of radon and its short-lived daughter-products in houses was unusually high (> 5 to 10 pCi l - 1 , > 185 to 370 Bq m - 3 ) in some houses with unpaved crawl spaces, and with concrete basements. External counting of radon daughter-products in the residents of one of the radon-contaminated houses indicated that there may be interference with the assay of plutonium in the lungs of persons who live in those houses

EPD--environmental product declarations for wood products : an application of life cycle information about forest products

Science.gov (United States)

Richard Bergman; Adam Taylor

2011-01-01

Transparent and credible environmental labeling of products is vital for a sustainable future. Ecolabeling shows information on the environmental performance of products, processes, and services. This article focuses on one type of ecolabeling referred to as environmental product declarations (EPDs) that provide environmental impact information based on life cycle...

Gender differences in promotions and scholarly productivity in academic urology.

Science.gov (United States)

Awad, Mohannad A; Gaither, Thomas W; Osterberg, E Charles; Yang, Glen; Greene, Kirsten L; Weiss, Dana A; Anger, Jennifer T; Breyer, Benjamin N

2017-10-01

The gender demographics within urology are changing as more women are entering the workforce. Since research productivity strongly influence career advancement, we aim to characterize gender differences in scholarly productivity and promotions in a cohort of graduated academic urologists. Urologists who graduated between 2002 and 2008 from 34 residency programs affiliated with the top 50 urology hospitals as ranked in 2009 by U.S. News & World Report were followed longitudinally. Only urologists affiliated with an academic teaching hospital were included for analysis. A total of 543 residents graduated, 459 (84.5%) males and 84 (15.5%) females. Of these, 173 entered academia, 137 (79.2%) males and 36 (20.8%) females. Women had fewer publications compared to men (mean 19.3 versus 61.7, p = 0.001). Fewer women compared to men were promoted from assistant professor 11 (30.6%) versus 83 (60.6%), p = 0.005. Fewer women achieved associate professor 10 (27.8%) versus 67 (48.9%), p = 0.005 or professor ranks 1 (2.8%) versus 16 (11.7%), p = 0.005 respectively compared to men. In a multivariate logistic regression analysis, after controlling for the number of total publications and number of years since graduation, gender was not predictive of achieving promotion, OR = 0.81 (95% CI 0.31-2.13), p = 0.673. Women are underrepresented in senior faculty roles in urology. Scholarly productivity seems to play a major role in academic promotion within urology. With increasing women in academic urology, further studies are needed to explore predictors of promotion and how women can achieve higher leadership roles in the field.

Greenprint on ethanol production in Saskatchewan

International Nuclear Information System (INIS)

2002-04-01

Investment in Saskatchewan's ethanol industry is being actively promoted by the provincial government. This document represents the provincial strategy in support of the ethanol industry, which will result in significant environmental benefits for the province and the residents through the increased use of ethanol as an additive to conventional gasoline. The big advantage offered by ethanol is a more complete fuel combustion, thereby reducing emissions of greenhouse gases by as much as 30 per cent. The production costs of ethanol have decreased in the last twenty years by 50 per cent. The competitiveness of ethanol should increase due to ongoing research and development progress being made. The agricultural sector should benefit through the creation of meaningful jobs in the sector, as well as offering new marketing opportunities to the grain producers of the province and the wood-product companies. A renewable resource, ethanol reduces carbon dioxide exhaust emissions bu up to 20 per cent, reduces the smog-creating compounds up to 15 per cent, and achieves a net reduction of up to 10 per cent in carbon dioxide emissions. The abundance of raw materials and resources required for the production of ethanol, Saskatchewan possesses an obvious advantage for becoming a world leader in the field. The government of Saskatchewan has developed its strategy, outlined in this document. It calls for tax incentives, the mandating of ethanol blend, opening up markets, working with communities. The industry size, economic impact, export potential, and future opportunities were briefly discussed in the last section of the document. 1 tab., 3 figs

Land application uses for dry FGD by-products, Phase 1 report

Energy Technology Data Exchange (ETDEWEB)

Bigham, J.; Dick, W.; Forster, L.; Hitzhusen, F.; McCoy, E.; Stehouwer, R.; Traina, S.; Wolfe, W.

1993-04-01

The 1990 amendments to the Clean Air Act have spurred the development of flue gas desulfurization (FGD) processes, several of which produce a dry, solid by-product material consisting of excess sorbent, reaction products containing sulfates and sulfites, and coal fly ash. FGD by-product materials are treated as solid wastes and must be landfilled. It is highly desirable to find beneficial reuses for these materials provided the environmental impacts are minimal and socially acceptable. Phase 1 results of a 4 and 1/2 year study to demonstrate large volume beneficial uses of FGD by-products are reported. The purpose of the Phase 1 portion of the project was to characterize the chemical, physical, mineralogical and engineering properties of the FGD by-product materials obtained from various FGD technologies being developed in the state of Ohio. Phase 1 also involved the collection of baseline economic data related to the beneficial reuse of these FGD materials. A total of 58 samples were collected and analyzed. The results indicated the chemical composition of the FGD by-product materials were dominated by Ca, S, Al, and Si. Many of the elements regulated by the US Environmental Protection Agency reside primarily in the fly ash. Phase 1 results revealed that FGD by-product materials are essentially coal fly ash materials diluted with unreacted sorbent and reaction products. High volume beneficial reuses will depend on the economics of their substituting for existing materials for various types of applications (e.g. as an agricultural liming material, soil borrow for highway embankment construction, and reclamation of active and abandoned surface coal mines). Environmental constraints to the beneficial reuse of dry FGD by-product materials, based on laboratory and leachate studies, seem to be less than for coal fly ash.

An Optimization Model for Product Placement on Product Listing Pages

Directory of Open Access Journals (Sweden)

Yan-Kwang Chen

2014-01-01

Full Text Available The design of product listing pages is a key component of Website design because it has significant influence on the sales volume on a Website. This study focuses on product placement in designing product listing pages. Product placement concerns how venders of online stores place their products over the product listing pages for maximization of profit. This problem is very similar to the offline shelf management problem. Since product information sources on a Web page are typically communicated through the text and image, visual stimuli such as color, shape, size, and spatial arrangement often have an effect on the visual attention of online shoppers and, in turn, influence their eventual purchase decisions. In view of the above, this study synthesizes the visual attention literature and theory of shelf-space allocation to develop a mathematical programming model with genetic algorithms for finding optimal solutions to the focused issue. The validity of the model is illustrated with example problems.

Production of lovastatin and itaconic acid by Aspergillus terreus: a comparative perspective.

Science.gov (United States)

Boruta, Tomasz; Bizukojc, Marcin

2017-02-01

Aspergillus terreus is a textbook example of an industrially relevant filamentous fungus. It is used for the biotechnological production of two valuable metabolites, namely itaconic acid and lovastatin. Itaconic acid serves as a precursor in polymer industry, whereas lovastatin found its place in the pharmaceutical market as a cholesterol-lowering statin drug and a precursor for semisynthetic statins. Interestingly, their biosynthetic gene clusters were shown to reside in the common genetic neighborhood. Despite the genomic proximity of the underlying biosynthetic genes, the production of lovastatin and itaconic acid was shown to be favored by different factors, especially with respect to pH values of the broth. While there are several reviews on various aspects of lovastatin and itaconic acid production, the survey on growth conditions, biochemistry and morphology related to the formation of these two metabolites has never been presented in the comparative manner. The aim of the current review is to outline the correlations and contrasts with respect to process-related and biochemical discoveries regarding itaconic acid and lovastatin production by A. terreus.

[Skin Care to Prevent Development of Pressure Ulcers in Bedridden Nursing Home Residents from Developing Pressure Ulcers in Nursing Home Residents].

Science.gov (United States)

Furukawa, Chie

2015-12-01

The purpose of this study was to clarify whether skincare products are effective in preventing development of pressure ulcers in bedridden nursing home residents. The study sample consisted of 21 nursing home residents at a nursing home in Osaka, Japan who use diapers. Participants were assigned to 3 groups and compared to a control group. None of the subjects developed a pressure ulcer and had improved skin condition around the anus.

Radioisotope production

International Nuclear Information System (INIS)

1988-01-01

The trial production runs started in the previous report period were continued and have been extended to 67 Ga, 81 Rb/ 81m Kr and 111 In, the production of which will be taken over from the Pretoria cyclotron at the end of this year, when that machine is scheduled to be shut down. After commissioning of the target water cooling system and the helium cooling system for beam foil windows at the beginning of this year, these production runs could also be extended to high beam currents (up to 50 μA). Test consignments of a number of products have been supplied to various potential future users, and 123 I, in the form of Na 123 I capsules as well as 123 I-sodium hippurate, and 52 Fe-citrate have actually been used with success in trial diagnostic studies on patients. A procedure for labelling IPPA and 3-IPMPA with 123 I has been developed, while initial work has also been done on the radioiodination of monoclonal antifibrine antibodies. The last major facility needed for the commencement of the routine radioisotope production programme, namely the multiple-target facility, is now ready for installation in the production vault within the next few weeks, and routine production runs are expected to start in November 1988. 4 figs., 18 refs

Applying linear programming model to aggregate production planning of coated peanut products

Science.gov (United States)

Rohmah, W. G.; Purwaningsih, I.; Santoso, EF S. M.

2018-03-01

The aim of this study was to set the overall production level for each grade of coated peanut product to meet market demands with a minimum production cost. The linear programming model was applied in this study. The proposed model was used to minimize the total production cost based on the limited demand of coated peanuts. The demand values applied to the method was previously forecasted using time series method and production capacity aimed to plan the aggregate production for the next 6 month period. The results indicated that the production planning using the proposed model has resulted a better fitted pattern to the customer demands compared to that of the company policy. The production capacity of product family A, B, and C was relatively stable for the first 3 months of the planning periods, then began to fluctuate over the next 3 months. While, the production capacity of product family D and E was fluctuated over the 6-month planning periods, with the values in the range of 10,864 - 32,580 kg and 255 – 5,069 kg, respectively. The total production cost for all products was 27.06% lower than the production cost calculated using the company’s policy-based method.

Efficiency and Import Penetrationon the Productivity of Textile Industry and Textile Products

Directory of Open Access Journals (Sweden)

Catur Basuki Rakhmawan

2012-12-01

Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the ave-rage level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

One-carbon substrate-based biohydrogen production: microbes, mechanism, and productivity.

Science.gov (United States)

Rittmann, Simon K-M R; Lee, Hyun Sook; Lim, Jae Kyu; Kim, Tae Wan; Lee, Jung-Hyun; Kang, Sung Gyun

2015-01-01

Among four basic mechanisms for biological hydrogen (H2) production, dark fermentation has been considered to show the highest hydrogen evolution rate (HER). H2 production from one-carbon (C1) compounds such as formate and carbon monoxide (CO) is promising because formate is an efficient H2 carrier, and the utilization of CO-containing syngas or industrial waste gas may render the industrial biohydrogen production process cost-effective. A variety of microbes with the formate hydrogen lyase (FHL) system have been identified from phylogenetically diverse groups of archaea and bacteria, and numerous efforts have been undertaken to improve the HER for formate through strain optimization and bioprocess development. CO-dependent H2 production has been investigated to enhance the H2 productivity of various carboxydotrophs via an increase in CO gas-liquid mass transfer rates and the construction of genetically modified strains. Hydrogenogenic CO-conversion has been applied to syngas and by-product gas of the steel-mill process, and this low-cost feedstock has shown to be promising in the production of biomass and H2. Here, we focus on recent advances in the isolation of novel phylogenetic groups utilizing formate or CO, the remarkable genetic engineering that enhances H2 productivity, and the practical implementation of H2 production from C1 substrates. Copyright © 2014 Elsevier Inc. All rights reserved.

Linear Optimization Techniques for Product-Mix of Paints Production in Nigeria

Directory of Open Access Journals (Sweden)

Sulaimon Olanrewaju Adebiyi

2014-02-01

Full Text Available Many paint producers in Nigeria do not lend themselves to flexible production process which is important for them to manage the use of resources for effective optimal production. These goals can be achieved through the application of optimization models in their resources allocation and utilisation. This research focuses on linear optimization for achieving product- mix optimization in terms of the product identification and the right quantity in paint production in Nigeria for better profit and optimum firm performance. The computational experiments in this research contains data and information on the units item costs, unit contribution margin, maximum resources capacity, individual products absorption rate and other constraints that are particular to each of the five products produced in the company employed as case study. In data analysis, linear programming model was employed with the aid LINDO 11 software to analyse the data. The result has showed that only two out of the five products under consideration are profitable. It also revealed the rate to which the company needs to reduce cost incurred on the three other products before making them profitable for production.

Modelling production system architectures in the early phases of product development

DEFF Research Database (Denmark)

Guðlaugsson, Tómas Vignir; Ravn, Poul Martin; Mortensen, Niels Henrik

2016-01-01

are needed and appropriate to enable determination of obtainable product quality. In order to meet this challenge, it is suggested that a visual modelling framework be adopted that clarifies which product and production features are known at a specific time of the project and which features will be worked...... on – leading to an improved basis for prioritizing activities in the project. Requirements for the contents of the framework are presented, and literature on production and system models is reviewed. The production system architecture modelling framework is founded on methods and approaches in literature......This article suggests a framework for modelling a production system architecture in the early phases of product development.The challenge in these phases is that the products to be produced are not completely defined and yet decisions need to be made early in the process on what investments...

Toyota production system beyond large-scale production

CERN Document Server

Ohno, Taiichi

1998-01-01

In this classic text, Taiichi Ohno--inventor of the Toyota Production System and Lean manufacturing--shares the genius that sets him apart as one of the most disciplined and creative thinkers of our time. Combining his candid insights with a rigorous analysis of Toyota's attempts at Lean production, Ohno's book explains how Lean principles can improve any production endeavor. A historical and philosophical description of just-in-time and Lean manufacturing, this work is a must read for all students of human progress. On a more practical level, it continues to provide inspiration and instruction for those seeking to improve efficiency through the elimination of waste.

Lost productivity in four European countries among patients with rheumatic disorders: are absenteeism and presenteeism transferable?

Science.gov (United States)

Knies, Saskia; Candel, Math J J M; Boonen, Annelies; Evers, Silvia M A A; Ament, Andre J H A; Severens, Johan L

2012-09-01

When national pharmacoeconomic guidelines are compared, different recommendations are identified on how to identify, measure and value lost productivity, leading to difficulties when comparing lost productivity estimates across countries. From a transferability point of view, the question arises of whether differences between countries regarding lost productivity are the result of using different calculation methods (methodological differences) or of other between-country differences. When lost productivity data differ significantly across countries, the transferability of lost productivity data across countries is hindered. The objective of this study was to investigate whether country of residence has a significant influence on the quantity of lost productivity among patients with rheumatic disorders. Confounding factors that might differ between countries were corrected for, while the methodology used to identify and measure lost productivity was kept the same. This question was investigated by means of an online questionnaire filled out by 200 respondents with a rheumatic disorder per country in four European countries, namely the Netherlands, the UK, Germany and France. In addition to those regarding lost productivity, the questionnaire contained questions about patient characteristics, disability insurance, disease characteristics, quality of life and job characteristics as these variables are expected to influence lost productivity in terms of absenteeism and presenteeism. The data were analysed by regression analyses, in which different components - being absent in last 3 months, number of days absent and presenteeism - of lost productivity were the main outcome measures and other variables, such as gender, impact of disease, shift work, job control, partial disability and overall general health, were corrected for. The results showed that country sometimes has a significant influence on lost productivity and that other variables such as, for example, age

Productivity cost due to maternal ill health in Sri Lanka.

Directory of Open Access Journals (Sweden)

Suneth Agampodi

Full Text Available BACKGROUND: The global impact of maternal ill health on economic productivity is estimated to be over 15 billion USD per year. Global data on productivity cost associated with maternal ill health are limited to estimations based on secondary data. Purpose of our study was to determine the productivity cost due to maternal ill health during pregnancy in Sri Lanka. METHODS AND FINDINGS: We studied 466 pregnant women, aged 24 to 36 weeks, residing in Anuradhapura, Sri Lanka. A two stage cluster sampling procedure was used in a cross sectional design and all pregnant women were interviewed at clinic centers, using the culturally adapted Immpact tool kit for productivity cost assessment. Of the 466 pregnant women studied, 421 (90.3% reported at least one ill health condition during the pregnancy period, and 353 (83.8% of them had conditions affecting their daily life. Total incapacitation requiring another person to carry out all their routine activities was reported by 122 (26.1% of the women. In this study sample, during the last episode of ill health, total number of days lost due to absenteeism was 3,356 (32.9% of total loss and the days lost due to presenteeism was 6,832.8 (67.1% of the total loss. Of the 353 women with ill health conditions affecting their daily life, 280 (60% had coping strategies to recover loss of productivity. Of the coping strategies used to recover productivity loss during maternal ill health, 76.8% (n = 215 was an intra-household adaptation, and 22.8% (n = 64 was through social networks. Loss of productivity was 28.9 days per episode of maternal ill health. The mean productivity cost due to last episode of ill health in this sample was Rs.8,444.26 (95% CI-Rs.6888.74-Rs.9999.78. CONCLUSIONS: Maternal ill health has a major impact on household productivity and economy. The major impact is due to, generally ignored minor ailments during pregnancy.

Production Function Geometry with "Knightian" Total Product

Science.gov (United States)

Truett, Dale B.; Truett, Lila J.

2007-01-01

Authors of principles and price theory textbooks generally illustrate short-run production using a total product curve that displays first increasing and then diminishing marginal returns to employment of the variable input(s). Although it seems reasonable that a temporary range of increasing returns to variable inputs will likely occur as…

Singing emotionally: A study of pre-production, production, and post-production facial expressions

Directory of Open Access Journals (Sweden)

Lena Rachel Quinto

2014-04-01

Full Text Available Singing involves vocal production accompanied by a dynamic and meaningful use of facial expressions, which may serve as ancillary gestures that complement, disambiguate, or reinforce the acoustic signal. In this investigation, we examined the use of facial movements to communicate emotion, focusing on movements arising in three epochs: before vocalisation (pre-production, during vocalisation (production, and immediately after vocalisation (post-production. The stimuli were recordings of seven vocalists’ facial movements as they sang short (14 syllable melodic phrases with the intention of communicating happiness, sadness, irritation, or no emotion. Facial movements were presented as point-light displays to 16 observers who judged the emotion conveyed. Experiment 1 revealed that the accuracy of emotional judgement varied with singer, emotion and epoch. Accuracy was highest in the production epoch, however, happiness was well communicated in the pre-production epoch. In Experiment 2, observers judged point-light displays of exaggerated movements. The ratings suggested that the extent of facial and head movements is largely perceived as a gauge of emotional arousal. In Experiment 3, observers rated point-light displays of scrambled movements. Configural information was removed in these stimuli but velocity and acceleration were retained. Exaggerated scrambled movements were likely to be associated with happiness or irritation whereas unexaggerated scrambled movements were more likely to be identified as neutral. An analysis of the motions of singers revealed systematic changes in facial movement as a function of the emotional intentions of singers. The findings confirm the central role of facial expressions in vocal emotional communication, and highlight individual differences between singers in the amount and intelligibility of facial movements made before, during, and after vocalization.

How does burnout affect physician productivity? A systematic literature review

Science.gov (United States)

2014-01-01

Background Interest in the well-being of physicians has increased because of their contributions to the healthcare system quality. There is growing recognition that physicians are exposed to workplace factors that increase the risk of work stress. Long-term exposure to high work stress can result in burnout. Reports from around the world suggest that about one-third to one-half of physicians experience burnout. Understanding the outcomes associated with burnout is critical to understanding its affects on the healthcare system. Productivity outcomes are among those that could have the most immediate effects on the healthcare system. This systematic literature review is one of the first to explore the evidence for the types of physician productivity outcomes associated with physician burnout. It answers the question, “How does burnout affect physician productivity?” Methods A systematic search was performed of: Medline Current, Medline in process, PsycInfo, Embase and Web of Science. The search period covered 2002 to 2012. The searches identified articles about practicing physicians working in civilian settings. Articles that primarily looked only at residents or medical students were excluded. Productivity was captured by hours worked, patients seen, sick leave, leaving the profession, retirement, workload and presenteeism. Studies also were excluded if: (1) the study sample was not comprised of at least 50% physicians, (2) the study did not examine the relationship between burnout and productivity or (3) a validated measure of burnout was not used. Results The search identified 870 unique citations; 5 met the inclusion/exclusion criteria. This review indicates that globally there is recognition of the potential impact of physician burnout on productivity. Productivity was examined using: number of sick leave days, work ability, intent to either continue practicing or change jobs. The majority of the studies indicate there is a negative relationship between

How does burnout affect physician productivity? A systematic literature review.

Science.gov (United States)

Dewa, Carolyn S; Loong, Desmond; Bonato, Sarah; Thanh, Nguyen Xuan; Jacobs, Philip

2014-07-28

Interest in the well-being of physicians has increased because of their contributions to the healthcare system quality. There is growing recognition that physicians are exposed to workplace factors that increase the risk of work stress. Long-term exposure to high work stress can result in burnout. Reports from around the world suggest that about one-third to one-half of physicians experience burnout. Understanding the outcomes associated with burnout is critical to understanding its affects on the healthcare system. Productivity outcomes are among those that could have the most immediate effects on the healthcare system. This systematic literature review is one of the first to explore the evidence for the types of physician productivity outcomes associated with physician burnout. It answers the question, "How does burnout affect physician productivity?" A systematic search was performed of: Medline Current, Medline in process, PsycInfo, Embase and Web of Science. The search period covered 2002 to 2012. The searches identified articles about practicing physicians working in civilian settings. Articles that primarily looked only at residents or medical students were excluded. Productivity was captured by hours worked, patients seen, sick leave, leaving the profession, retirement, workload and presenteeism. Studies also were excluded if: (1) the study sample was not comprised of at least 50% physicians, (2) the study did not examine the relationship between burnout and productivity or (3) a validated measure of burnout was not used. The search identified 870 unique citations; 5 met the inclusion/exclusion criteria. This review indicates that globally there is recognition of the potential impact of physician burnout on productivity. Productivity was examined using: number of sick leave days, work ability, intent to either continue practicing or change jobs. The majority of the studies indicate there is a negative relationship between burnout and productivity. However

Beyond Research Productivity: Matching Productivity Measures to Institutional Mission

Directory of Open Access Journals (Sweden)

Patricia Bartholomew

2016-11-01

Full Text Available Aim/Purpose: The aim of this paper is to develop a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate departmental productivity that fills the gap in methodological bench-marking tools for overall faculty productivity. Background:\tA disproportionate number of departmental and faculty productivity indices in higher education rely solely on research. Productivity in other areas of faculty workload areas, like teaching and institutional and community service, are either measured separately or ignored all together – even when those activities are institutionally mandated. This does a disservice to those who work in those institutions and skews incentives. Methodology: This paper utilizes a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate depart-mental productivity in five disparate departments (English, Biology, Mathematics, Sociology, and Computer Science common to two universities with differing missions (teaching and service. Findings: The results reveal the bias inherent in relying solely on research as a proxy for overall productivity in institutions that have differing missions. Recommendations for Practitioners: Utilizing better metrics informs higher education administrators, promotes better decision-making, and allows incentives to re-align with desired outcomes. Recommendation for Researchers: This paper recommends combing all aspects of faculty workload into a single benchmark index to better measure departmental productivity. Future Research: Further research into improving this simple index is warranted and would include how to account for quality and other facets of productivity.

Productivity and Performance Measurement

DEFF Research Database (Denmark)

Hald, Kim Sundtoft; Spring, Martin

This study explores conceptually how performance measurement as discussed in the literature, enables or constrains the ability to manage and improve productivity. It uses an inter-disciplinary literature review to identify five areas of concern relating productivity accounting to the ability...... to improve productivity: “Productivity representation”; “productivity incentives”, “productivity intervention”; “productivity trade-off or synergy” and “productivity strategy and context”. The paper discusses these areas of concern and expands our knowledge of how productivity and performance measurement...

A Production Model for Deteriorating Inventory Items with Production Disruptions

OpenAIRE

Yong He; Ju He

2010-01-01

Disruption management has recently become an active area of research. In this study, an extension is made to consider the fact that some products may deteriorate during storage. A production-inventory model for deteriorating items with production disruptions is developed. Then the optimal production and inventory plans are provided, so that the manufacturer can reduce the loss caused by disruptions. Finally, a numerical example is used to illustrate the model.

Fusion of product and process data: Batch-mode and real-time streaming

Energy Technology Data Exchange (ETDEWEB)

Vincent De Sapio; Spike Leonard

1999-12-01

In today's DP product realization enterprise it is imperative to reduce the design-to-fabrication cycle time and cost while improving the quality of DP parts (reducing defects). Much of this challenge resides in the inherent gap between the product and process worlds. The lack of seamless, bi-directional flow of information prevents true concurrency in the product realization world. This report addresses a framework for product-process data fusion to help achieve next generation product realization. A fundamental objective is to create an open environment for multichannel observation of process date, and subsequent mapping of that data onto product geometry. In addition to the sensor-based observation of manufacturing processes, model-based process data provides an important complement to empirically acquired data. Two basic groups of manufacturing models are process physics, and machine kinematics and dynamics. Process physics addresses analytical models that describe the physical phenomena of the process itself. Machine kinematic and dynamic models address the mechanical behavior of the processing equipment. As a secondary objective, an attempt has been made in this report to address part of the model-based realm through the development of an open object-oriented library and toolkit for machine kinematics and dynamics. Ultimately, it is desirable to integrate design definition, with all types of process data; both sensor-based and model-based. Collectively, the goal is to allow all disciplines within the product realization enterprise to have a centralized medium for the fusion of product and process data.

New salty waffle products "Fish Krekis" with fish & plant semifinished products

Directory of Open Access Journals (Sweden)

Fedorova Dina

2016-04-01

Full Text Available The study examines the directions of expansion of the range of wafer snack products of high nutritional value by using fish & plant semifinished products. The study scientifically grounds the benefits of using the new fish & plant semifinished products in manufacturing waffle salty snack products. The data provided in the article prove that the use of the fish & plant semifinished products & herbal ingredients enable a range of the new wafer snack products «Fish krekis» with high content of proteins, organic calcium, fiber and vitamins, with improved consumer properties, as well as more efficient use of Ukrainian raw fish materials.

Product competitiveness analysis for e-commerce platform of special agricultural products

Science.gov (United States)

Wan, Fucheng; Ma, Ning; Yang, Dongwei; Xiong, Zhangyuan

2017-09-01

On the basis of analyzing the influence factors of the product competitiveness of the e-commerce platform of the special agricultural products and the characteristics of the analytical methods for the competitiveness of the special agricultural products, the price, the sales volume, the postage included service, the store reputation, the popularity, etc. were selected in this paper as the dimensionality for analyzing the competitiveness of the agricultural products, and the principal component factor analysis was taken as the competitiveness analysis method. Specifically, the web crawler was adopted to capture the information of various special agricultural products in the e-commerce platform ---- chi.taobao.com. Then, the original data captured thereby were preprocessed and MYSQL database was adopted to establish the information library for the special agricultural products. Then, the principal component factor analysis method was adopted to establish the analysis model for the competitiveness of the special agricultural products, and SPSS was adopted in the principal component factor analysis process to obtain the competitiveness evaluation factor system (support degree factor, price factor, service factor and evaluation factor) of the special agricultural products. Then, the linear regression method was adopted to establish the competitiveness index equation of the special agricultural products for estimating the competitiveness of the special agricultural products.

Ethanol production

Energy Technology Data Exchange (ETDEWEB)

Kolleurp, F; Daugulis, A J

1985-05-01

Extractive fermentation is a technique that can be used to reduce the effect of end-product inhibition through the use of a water-immiscible phase which removes fermentation products in situ. This has the beneficial effect of not only removing inhibitory products as they are formed (thus keeping reaction rates high) but also has the potential for reducing product recovery costs. We have chosen to examine the ethanol fermentation as a model system for end product inhibition and extractive fermentation, and have developed a computer model predicting the productivity enhancement possible with this technique. The model predicts an ethanol productivity of 82.6 g/L-h if a glucose feed of 750 g/L is fermented with a solvent having a distribution coefficient of 0.5 at a dilution rate of 5.0 h . This is more than 10 times higher than for a conventional chemostat fermentation of a 250 g/L glucose feed. In light of this, a systematic approach to extractive fermentation has been undertaken involving the screening of more than 1,000 solvents for their extractive properties. UNIFAC and UNIQUAC estimates of distribution coefficients and selectivities were compiled and ranked in a database, together with other important physical properties, such as density, surface tension and viscosity. Preliminary shake-flask and chemostat biocompatibility studies on the most promising solvents have been undertaken. The previous predictive, data base and experimental results are discussed.

Economic production quantity models for imperfect product and service with rework

OpenAIRE

Tai, Allen H.

2012-01-01

When imperfect quality products are produced in a production process, rework may be performed to make them become serviceable. In an inventory system, items may deteriorate. Selling deteriorated items to customers will create negative impact on corporate image. In this paper, two economic production quantity (EPQ) models are proposed for deteriorating items with rework process. A single production-rework plant system and a system consists of $n$ production plants and one rework plant are cons...

Product Platform Modeling

DEFF Research Database (Denmark)

Pedersen, Rasmus

for customisation of products. In many companies these changes in the business environment have created a controversy between the need for a wide variety of products offered to the marketplace and a desire to reduce variation within the company in order to increase efficiency. Many companies use the concept...... other. These groups can be varied and combined to form different product variants without increasing the internal variety in the company. Based on the Theory of Domains, the concept of encapsulation in the organ domain is introduced, and organs are formulated as platform elements. Included......This PhD thesis has the title Product Platform Modelling. The thesis is about product platforms and visual product platform modelling. Product platforms have gained an increasing attention in industry and academia in the past decade. The reasons are many, yet the increasing globalisation...

Estimating product-to-product variations in metal forming using force measurements

NARCIS (Netherlands)

Havinga, Gosse Tjipke; Van Den Boogaard, Ton

2017-01-01

The limits of production accuracy of metal forming processes can be stretched by the development of control systems for compensation of product-to-product variations. Such systems require the use of measurements from each semi-finished product. These measurements must be used to estimate the final

Coordiantion by using Product Specifications in Product Development

DEFF Research Database (Denmark)

Terkelsen, Søren Bendix

1997-01-01

This paper is based on a case study. It treats the coordination by generating product specifications in product development. This paper contains three very important aspects, which cause a need for coordination, and call attention to the coordination mechanisms. The three aspects are task...... uncertainty, task complexity, and dependencies between activities. If one want to select coordination mechanisms, which improve the performance in product development, it is very important to have a knowledge about these three aspects. In the following the aspects are identified in the literature...

Development of Product Availability Monitoring System In Production Unit In Automotive Component Industry

Science.gov (United States)

Hartono, Rachmad; Raharno, Sri; Yuwana Martawirya, Yatna; Arthaya, Bagus

2018-03-01

This paper described a methodology to monitor the availability of products in a production unit in the automotive component industry. Automotive components made are automotive components made through sheet metal working. Raw material coming into production unit in the form of pieces of plates that have a certain size. Raw materials that come stored in the warehouse. Data of raw each material in the warehouse are recorded and stored in a data base system. The material will then undergo several production processes in the production unit. When the material is taken from the warehouse, material data are also recorded and stored in a data base. The data recorded are the amount of material, material type, and date when the material is out of the warehouse. The material coming out of the warehouse is labeled with information related to the production processes that the material must pass. Material out of the warehouse is a product will be made. The products have been completed, are stored in the warehouse products. When the product is entered into the product warehouse, product data is also recorded by scanning the barcode contained on the label. By recording the condition of the product at each stage of production, we can know the availability of the product in a production unit in the form of a raw material, the product being processed and the finished product.

Productivity changes in OECD healthcare systems: bias-corrected Malmquist productivity approach.

Science.gov (United States)

Kim, Younhee; Oh, Dong-Hyun; Kang, Minah

2016-10-01

This study evaluates productivity changes in the healthcare systems of 30 Organization for Economic Co-operation and Development (OECD) countries over the 2002-2012 periods. The bootstrapped Malmquist approach is used to estimate bias-corrected indices of healthcare performance in productivity, efficiency and technology by modifying the original distance functions. Two inputs (health expenditure and school life expectancy) and two outputs (life expectancy at birth and infant mortality rate) are used to calculate productivity growth. There are no perceptible trends in productivity changes over the 2002-2012 periods, but positive productivity improvement has been noticed for most OECD countries. The result also informs considerable variations in annual productivity scores across the countries. Average annual productivity growth is evenly yielded by efficiency and technical changes, but both changes run somewhat differently across the years. The results of this study assert that policy reforms in OECD countries have improved productivity growth in healthcare systems over the past decade. Countries that lag behind in productivity growth should benchmark peer countries' practices to increase performance by prioritizing an achievable trajectory based on socioeconomic conditions. For example, relatively inefficient countries in this study indicate higher income inequality, corresponding to inequality and health outcomes studies. Although income inequality and globalization are not direct measures to estimate healthcare productivity in this study, these issues could be latent factors to explain cross-country healthcare productivity for future research. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

What Happens to Integrated Product Development Models with Product/Service-System Approaches?

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles; Andreasen, Mogens Myrup

2006-01-01

Integrated Product Development (IPD) has traditionally focused on the development activities relating to physical technological artefacts. With the advent of business approaches for manufacturing firms based on providing customers the utility of integrated products and services – a term dubbed...... ‘product/service-systems (PSS)’ – companies need to extend their activities to include new dimensions of development. Within the paradigm of mass production and consumption, traditional product-oriented business strategies regarded physical technological artefacts (products) as the mediators of customer...... value. Value was based on the exchange of products between a providing company and a receiving customer. The more products the company could sell, the more revenue it generated. At the point of sale the ownership and responsibility of the product was transferred from company to customer. A customer...

Defining product intake fraction to quantify and compare exposure to consumer products

DEFF Research Database (Denmark)

Jolliet, Oliver; Ernstoff, Alexi; Csiszar, Susan A.

2015-01-01

There is a growing consciousness that exposure studies need to better cover near-field exposure associated with products use. To consistently and quantitatively compare human exposure to chemicals in consumer products, we introduce the concept of product intake fraction, as the fraction...... of a chemical within a product that is eventually taken in by the human population. This metric enables consistent comparison of exposures during consumer product use for different product-chemical combinations, exposure duration, exposure routes and pathways and for other life cycle stages. We present example...... modalities within life cycle assessment and risk assessment contexts. The product intake fraction helps to provide a clear interface between the life cycle inventory and impact assessment phases, to identify best suited sentinel products and to calculate overall exposure to chemicals in consumer products...

QUANTIFYING SUPPLIERS’ PRODUCT QUALITY: AN EXPLORATORY PRODUCT AUDIT METHOD

Directory of Open Access Journals (Sweden)

S. Avakh Darestani

2012-01-01

Full Text Available

ENGLISH ABSTRACT:The quality of the raw material and supplied product from suppliers plays a critical role in the quality of the final product. It has become the norm that vehicle manufacturers require their suppliers to measure product quality and service with a product audit method. Measuring quality of product is emphasised by QS9000 VDA6.5 and ISO/TS16949. From a competitive standpoint, and also to see continuous improvement in business, companies need to monitor their suppliers’ performance. Quality and delivery are two very important indicators of supplier performance. This paper presents a statistical method for measuring the quality of supplied product. This method allocates different weights to variables and attributes characteristics. Moreover, following normal distribution, the tolerance zone is divided to three regions with different scores. Therefore, the quality of suppliers’ products can be monitored based on the Product Quality Audit Score (PQAS. However, this method may be employed for organisations to monitor their raw material, work-in-process parts, and final product. It can be an indicator to monitor supplier quality behaviour.

AFRIKAANSE OPSOMMING: Die gehalte van grondstowwe en produkte/komponente wat deur leweransiers verskaf word, speel ‘n kritiese rol in die gehalte van die finale produk. Dit het die norm geword in die motorvervaardigingsbedryf dat daar van leweransiers verwag word om hulle produkkwaliteit en –diens te meet by wyse van ‘n produkouditmetode. Die meting van produkkwaliteit word benadruk deur QS9000 VDA6.5 en ISO/TS16949. Uit ‘n mededingingshoek en ook om kontinue verbetering te monitor, is dit noodsaaklik dat leweransiers se verrigting gemeet word. Gehalte en aflewering is twee van die belangrikste indikatore van leweransiersverrigting. In hierdie artikel word ‘n statistiese model voorgehou vir die meting van die kwaliteit van die gelewerde produk. Die metode ken verskillende

COTTAGE CHEESE PRODUCTS FUNCTIONALITY

Directory of Open Access Journals (Sweden)

L. V. Golubeva

2015-01-01

Full Text Available Cottage cheese products holds a significant place among the dairy and milk-containing products. The range of products includes cheese: cheese, pastes, creams, cakes, etc. Such diversity can be attributed to their popularity among the population and benefit brought by the body from regular use. Curd protein is much better and easier to digest by the body than protein fish, meat or milk. Rich curd products lysine and methionine. Minerals contained in cheese products have a positive effect on bone formation and structure of tissues. The composition of curd products, in addition to cheese and dairy ingredients may include non-dairy ingredients origin. Today, for the production of cheese products use the most advanced technologies to further enrich its structure and significantly improve the nutritional value. Pine nut is widely used in the manufacture of many dairy products. But, in most cases, the production of dairy products as a filler used pine nut cake, which deprives the finished product valuable cedar oil. The authors proposed a technology for producing curd product with the addition of pine nuts and honey (pine nuts and fructose. Compatible with cream cheese filling insertion determined sensory organoleptic point scale. he optimum dosage of components: pine nuts – 5 %, honey – 10 % fructose – 7 %. Technological process of cottage cheese product is different from the traditional operations training components and their introduction into the finished cheese. Identify indicators of quality of the new product. Production of curd products thus expanding the range of dairy products functional orientation.

Tunnel production enhances quality in organic carrot seed production

DEFF Research Database (Denmark)

Deleuran, L C; Boelt, B

2009-01-01

production of open-pollinated carrot varieties increased the yield and germination percentages when compared with normal field conditions. Yield was in the range of 100-250 g and 2-17 g seeds m-2 respectively, and germination percentage was 84-95 and 43-55, respectively. However, hybrid carrot seed...... production showed lower yields than did their open-pollinated counterparts. Yields ranging from 60-123 g seeds m-2 can be obtained, but the production needs to be carefully planned and monitored. Different growing systems in tunnels have been studied in both open-pollinated and hybrid carrot (Daucus carota L......In Denmark, organic vegetable seed production is possible for some of the late-maturing species when the maturing is performed in lightweight tunnels which are also relevant for the isolation of small-scale production. The tunnel system offers several advantages, e.g., it is possible to control...

Evaluating the Impact of a New Product on the Sales of other Products

Directory of Open Access Journals (Sweden)

Julian Andreev Vasilev

2014-12-01

Full Text Available The purpose of this article is to evaluate the impact of a new product on the sales of other products. Launching a new product may lead to increase or decrease of sales in the products of the same group. Customers may continue buying standard products or they may be oriented to new products. New products may cause internal competition. Statistical methods are applied. Time series analysis is used. Transactional database of a confectionary factory is the main source of data. The time series analysis is carried in two datasets – quantities of sales of three products on a daily basis and on a monthly basis. The main methods used are time series analysis and regression analysis. The three time series (corresponding to the three products are separated into two parts – before and after launching the new product. It is proved that the new product does not affect the sales of the two other products. The new product is well accepted and its sales increase together with the sales of the two other products.

Comparison of Employer Productivity Metrics to Lost Productivity Estimated by Commonly Used Questionnaires.

Science.gov (United States)

Gardner, Bethany T; Dale, Ann Marie; Buckner-Petty, Skye; Van Dillen, Linda; Amick, Benjamin C; Evanoff, Bradley

2016-02-01

The aim of the study was to assess construct and discriminant validity of four health-related work productivity loss questionnaires in relation to employer productivity metrics, and to describe variation in economic estimates of productivity loss provided by the questionnaires in healthy workers. Fifty-eight billing office workers completed surveys including health information and four productivity loss questionnaires. Employer productivity metrics and work hours were also obtained. Productivity loss questionnaires were weakly to moderately correlated with employer productivity metrics. Workers with more health complaints reported greater health-related productivity loss than healthier workers, but showed no loss on employer productivity metrics. Economic estimates of productivity loss showed wide variation among questionnaires, yet no loss of actual productivity. Additional studies are needed comparing questionnaires with objective measures in larger samples and other industries, to improve measurement methods for health-related productivity loss.

Comparison of employer productivity metrics to lost productivity estimated by commonly used questionnaires

Science.gov (United States)

Gardner, Bethany T.; Dale, Ann Marie; Buckner-Petty, Skye; Van Dillen, Linda; Amick, Benjamin C.; Evanoff, Bradley

2016-01-01

Objective To assess construct and discriminant validity of four health-related work productivity loss questionnaires in relation to employer productivity metrics, and to describe variation in economic estimates of productivity loss provided by the questionnaires in healthy workers. Methods 58 billing office workers completed surveys including health information and four productivity loss questionnaires. Employer productivity metrics and work hours were also obtained. Results Productivity loss questionnaires were weakly to moderately correlated with employer productivity metrics. Workers with more health complaints reported greater health-related productivity loss than healthier workers, but showed no loss on employer productivity metrics. Economic estimates of productivity loss showed wide variation among questionnaires, yet no loss of actual productivity. Conclusions Additional studies are needed comparing questionnaires with objective measures in larger samples and other industries, to improve measurement methods for health-related productivity loss. PMID:26849261

Eutrophication effects on phytoplankton size-fractioned biomass and production at a tropical estuary.

Science.gov (United States)

Guenther, Mariana; Araújo, Moacyr; Flores-Montes, Manuel; Gonzalez-Rodriguez, Eliane; Neumann-Leitão, Sigrid

2015-02-28

Size-fractioned phytoplankton (pico, nano and microplankton) biomass and production were estimated throughout a year at Recife harbor (NE Brazil), a shallow well mixed tropical hypereutrophic estuary with short residence times but restricted water renewal. Intense loads of P-PO4 (maximum 14 μM) resulted in low N:P ratios (around 2:1), high phytoplankton biomass (B=7.1-72 μg chl-a L(-1)), production (PP=10-2657 μg C L(-1) h(-1)) and photosynthetic efficiency (P(B)=0.5-45 μg C μg chl-a(-1)), but no oxygen depletion (average O2 saturation: 109.6%). Nanoplankton dominated phytoplankton biomass (66%) but micro- and nanoplankton performed equivalent primary production rates (47% each). Production-biomass models indicate an export of the exceeding microplankton biomass during most of the year, possibly through grazing. The intense and constant nutrient and organic matter loading at Recife harbor is thus supporting the high microplankton productivity that is not accumulating on the system nor contributing to oxygen depletion, but supporting the whole system's trophic web. Copyright © 2014 Elsevier Ltd. All rights reserved.

Hydrogen production by supercritical water gasification of wastewater from food waste treatment processes

Energy Technology Data Exchange (ETDEWEB)

Lee, In-Gu [Korea Institute of Energy Research (Korea, Republic of)

2010-07-01

Korean food wastes have high moisture content (more than 85 wt%) and their major treatment processes such as drying or biological fermentations generate concentrated organic wastewater (CODs of about 100,000 mgO{sub 2}/L). For obtaining both wastewater treatment and hydrogen production from renewable resources, supercritical water gasification (SCWG) of the organic wastewater was carried out in this work. The effect of catalyst, reaction temperature, and reactor residence time on COD destruction and composition of gas products was examined. As a result, a SCWG of the wastewater over Ni- Y/activated charcoal at 700 C, 28 MPa yielded 99 % COD destruction and hydrogen-rich gas production (45 vol% H{sub 2}). A liquid-phase thermal pretreatment to destroy solid particles from the wastewater was proposed for more effective operation of the SCWG system. (orig.)

Sustainable Industrial Product Systems. Integration of Life Cycle Assessment in Product development and Optimization of Product Systems

Energy Technology Data Exchange (ETDEWEB)

Hanssen, Ole Joergen

1997-12-31

This thesis contributes to the development and testing of environmental life cycle assessment (LCA) in product development and management in industry. It is based on systems theory and systems engineering. It develops a method for sustainable product development that has been successfully tested in the Nordic project called NEP. The LCA method is also a basis for an optimization model, where life cycle economy and environmental impacts from product systems are optimized with a non-linear model. A more complete mathematical model for LCA, based on the functional requirements on a product system, is also developed. The statistical properties of emission factors are studied using a data set from the Swedish Kraft Mill industry. It is shown that emission factors may be assumed constants in the LCA model, but with rather large variations within a population of Kraft mills. It is shown that there are a few environmental impacts which are important for most types of products under Scandinavian conditions, especially global warming potential, acidification, human toxicity and fossil energy depletion. There are significant differences between the contribution to these impacts from different life cycle stages, where raw material processing and use of products are generally more important than the other stages. Test cases indicate that there are no large conflicts between improvements in environmental impacts and customer requirements. Environmental improvements seem to increase purchase cost of products in some cases, but the life cycle cost of the products seem in most cases to be reduced. It is concluded that there are opportunities for 30-50% improvements in product system, based on relatively simple modifications of the systems. 246 refs., 63 figs., 19 tabs.

Product Category Layout and Organization: Retail Placement of Food Products

NARCIS (Netherlands)

Herpen, van E.

2016-01-01

This article discusses the placement of food products in retail stores, in particular how the placement of food products can influence how consumers perceive the store in general and these products in particular. It reviews the overall layout of the store, assortment organization, and shelf

Biofuels versus food production: Does biofuels production increase food prices?

International Nuclear Information System (INIS)

Ajanovic, Amela

2011-01-01

Rapidly growing fossil energy consumption in the transport sector in the last two centuries caused problems such as increasing greenhouse gas emissions, growing energy dependency and supply insecurity. One approach to solve these problems could be to increase the use of biofuels. Preferred feedstocks for current 1st generation biofuels production are corn, wheat, sugarcane, soybean, rapeseed and sunflowers. The major problem is that these feedstocks are also used for food and feed production. The core objective of this paper is to investigate whether the recent increase of biofuels production had a significant impact on the development of agricultural commodity (feedstock) prices. The most important impact factors like biofuels production, land use, yields, feedstock and crude oil prices are analysed. The major conclusions of this analysis are: In recent years the share of bioenergy-based fuels has increased moderately, but continuously, and so did feedstock production, as well as yields. So far, no significant impact of biofuels production on feedstock prices can be observed. Hence, a co-existence of biofuel and food production seems possible especially for 2nd generation biofuels. However, sustainability criteria should be seriously considered. But even if all crops, forests and grasslands currently not used were used for biofuels production it would be impossible to substitute all fossil fuels used today in transport.

Global product development

DEFF Research Database (Denmark)

Hansen, Zaza Nadja Lee; Ahmed-Kristensen, Saeema

2011-01-01

Globalisation has enabled companies to globalise their product development process. Today, everything from manufacturing to R&D can be globally distributed. This has led to a more complex and disintegrated product development process. This paper investigates the impacts companies have experienced...... operational solutions to counteract the negative impacts with varying degrees of success. This paper presents a unique look into global product development through an investigation of its impact on the organisation, the product development process, and the product. Furthermore, it shows the solutions...... as a result of this, and how they have been addressed. Data was collected through case studies of five Danish multinational corporations. The findings showed that the companies experienced several challenges when they globalised their product development process. They consequently implemented various...

Product Platform Performance

DEFF Research Database (Denmark)

Munk, Lone

The aim of this research is to improve understanding of platform-based product development by studying platform performance in relation to internal effects in companies. Platform-based product development makes it possible to deliver product variety and at the same time reduce the needed resources...... engaging in platform-based product development. Similarly platform assessment criteria lack empirical verification regarding relevance and sufficiency. The thesis focuses on • the process of identifying and estimating internal effects, • verification of performance of product platforms, (i...... experienced representatives from the different life systems phase systems of the platform products. The effects are estimated and modeled within different scenarios, taking into account financial and real option aspects. The model illustrates and supports estimation and quantification of internal platform...

Formulation of a Production Strategy for a Software Product Line

Science.gov (United States)

2009-08-01

Strategy 9 5.1 Identifying the Critical Factors 9 5.1.1 Market Analysis 10 5.1.2 Building a Business Case 10 5.1.3 Scoping 10 5.1.4 Technology...ability to deliver new products quickly (i.e., its time to market ). The production strategy for a software product line is the high-level description of... strategy . The critical factors mentioned above refer to both market conditions that affect an organ- ization and how an organization’s products can

Product prioritization in a two-stage food production system with intermediate storage

DEFF Research Database (Denmark)

Akkerman, Renzo; van Donk, Dirk Pieter

2007-01-01

In the food-processing industry, usually a limited number of storage tanks for intermediate storage is available, which are used for different products. The market sometimes requires extremely short lead times for some products, leading to prioritization of these products, partly through...... the performance improvements for the prioritized product, as well as the negative effects for the other products. We also show how the effect decreases with more storage tanks, and increases with more products....... the dedication of a storage tank. This type of situation has hardly been investigated, although planners struggle with it in practice. This paper aims at investigating the fundamental effect of prioritization and dedicated storage in a two-stage production system, for various product mixes. We show...

Heavy Flavour Production

CERN Document Server

Nason, Paolo; Ridolfi, Giovanni

1995-01-01

We review the status of heavy flavour production in QCD. Comparison of experimental and theoretical results for top and bottom production are given. Selected topics in charm production are also discussed.

Distribution of Some Elements in Biosubstrates of Workers Occupied in the Production of Mineral Nitrogenous Phosphate Fertilizers

CERN Document Server

Gorbunov, A V; Lyapunov, S M; Okina, O I; Pavlov, S S; Geological Institute RAS, Moscow, Russia

2005-01-01

The data on the content of some trace elements typical for the production of nitrogenous phosphate fertilizers (F, Sr, rare-earth elements), as well as heavy and toxic metals in industrial products, occupational air, drinking water and biosubstrates (urine, hair) of the factory workers are presented. The correlations between the content of fluorine in urine and hair of workers and between the content of fluorine, length of service and age, have been shown. The correlation dependence between the content of F in biosubstrates and a number of trace elements typical for the given type of production has been evaluated. The comparison of the morbidity and character of diseases of the factory workers and of the local residents unoccupied in the production has been made.

Making online products more tangible : the effect of product presentation formats on product evaluations

NARCIS (Netherlands)

Verhagen, Tibert; Vonkeman, Charlotte; van Dolen, Willemijn

2016-01-01

Although several studies have looked at the effects of online product presentations on consumer decision making, no study thus far has considered a potential key factor in online product evaluations: tangibility. The present study aims at filling this gap by developing and testing a model that

Production and distribution of livestock products in Aomori prefecture: Part 1

International Nuclear Information System (INIS)

Iyogi, Takashi; Hisamatsu, Shun'ichi; Inaba, Jiro

2000-01-01

We have collected natural and sociological environmental data related to the estimation of radiation dose by radionuclides which will be released from nuclear fuel cycle facilities. Published data concerning production and distribution of livestock products in Aomori Prefecture were collected and compiled. We tried to estimate market dilution coefficient, which is the ratio of local products to total consumption by people in a target area, for the livestock products from the compiled data under some assumptions. Production weight per unit field area (production density) and consumption rates of grass and feed by the domestic animals were also estimated by using the collected data. Estimated means of the market dilution coefficients for livestock products and production density of grass were lower than those used in the environmental assessment for a reprocessing plant now under construction in Rokkasho Village. Consumption rates of grass and feed by milk cows and beef cattle were higher than those used in the assessment. Since we assumed that milk cows and beef cattle of Aomori Prefecture consume only grass and feed produced in Aomori Prefecture, the rates may be overestimated. Further study is required to clarify this point. We collected 52 reports in the literature related to transfer reduction of radionuclides to livestock products and decontamination of the radionuclides. (author)

Fuzzy production planning models for an unreliable production system with fuzzy production rate and stochastic/fuzzy demand rate

Directory of Open Access Journals (Sweden)

K. A. Halim

2011-01-01

Full Text Available In this article, we consider a single-unit unreliable production system which produces a single item. During a production run, the production process may shift from the in-control state to the out-of-control state at any random time when it produces some defective items. The defective item production rate is assumed to be imprecise and is characterized by a trapezoidal fuzzy number. The production rate is proportional to the demand rate where the proportionality constant is taken to be a fuzzy number. Two production planning models are developed on the basis of fuzzy and stochastic demand patterns. The expected cost per unit time in the fuzzy sense is derived in each model and defuzzified by using the graded mean integration representation method. Numerical examples are provided to illustrate the optimal results of the proposed fuzzy models.

Generalized product

OpenAIRE

Greco, Salvatore; Mesiar, Radko; Rindone, Fabio

2014-01-01

Aggregation functions on [0,1] with annihilator 0 can be seen as a generalized product on [0,1]. We study the generalized product on the bipolar scale [–1,1], stressing the axiomatic point of view. Based on newly introduced bipolar properties, such as the bipolar increasingness, bipolar unit element, bipolar idempotent element, several kinds of generalized bipolar product are introduced and studied. A special stress is put on bipolar semicopulas, bipolar quasi-copulas and bipolar copulas.

Workforce productivity.

Science.gov (United States)

Williams, Ruth

2012-10-26

Managers who are responsible for delivering the workforce productivity element of the Quality, Innovation, Productivity and Prevention (QIPP) programme can network and share best practice through a dedicated NHS Employers webpage.

Determination of production biology of cladocera in a reservoir receiving hyperthermal effluents from a nuclear production reactor

International Nuclear Information System (INIS)

Vigerstad, T.J.

1980-01-01

The effects on zooplankton of residence in a cooling reservoir receiving hyperthermal effluents directly from a nuclear-production-reactor were studied. Rates of cladoceran population production were compared at two stations in the winter and summer of 1976 on Par Pond located on the Savannah River Plant, Aiken, SC. One station was located in an area of the reservoir directly receiving hyperthermal effluent (Station MAS) and the second was located about 4 km away in an area where surface temperatures were normal for reservoirs in the general geographical region (Station CAS). A non-parametric comparison between stations of standing stock and fecundity data for Bosmina longirostris, taken for the egg ratio model, was used to observe potential hyperthermal effluent effects. There was a statistically higher incidence of deformed eggs in the Bosmina population at Station MAS in the summer. Bosmina standing stock underwent two large oscillations in the winter and three large oscillations in the summer at Station MAS compared with two in the winter and one in the summer at Station CAS. These results are consistent with almost all other Par Pond studies which have found the two stations to be essentially similar in spectra composition but with some statistically significant differences in various aspects of the biology of the species

Young adults' perceptions about established and emerging tobacco products: results from eight focus groups.

Science.gov (United States)

Wray, Ricardo J; Jupka, Keri; Berman, Susan; Zellin, Stacie; Vijaykumar, Santosh

2012-02-01

In order to sustain their market, tobacco producers target young adults through novel product design and marketing strategies. Public health professionals need to understand young adults' risks perceptions about and use of new tobacco products to best inform tobacco control interventions. In 2009, researchers conducted 8 focus groups with 67 young adults stratified by self-reported tobacco use and nonuse, residence in rural and urban areas, and living in a state with or without a statewide smoking restriction policy. Participants provided feedback about their knowledge and risk perceptions about and use of tobacco products and marketing. Participants reported a high level of familiarity with a wide range of novel tobacco products. A great deal of confusion and disagreement appeared with regard to absolute and relative risk of different tobacco products. Participants readily discussed using smokeless tobacco products as alternatives to smoking when smoking is prohibited. Fewer differences in tobacco-related knowledge risk perceptions and use were found between urban and rural participants and those in smoke-free policy and nonpolicy states than between user and nonuser groups. Both users and nonusers were familiar with and skeptical about tobacco marketing and prevention efforts. Young adults are familiar with many tobacco products, but they convey little understanding of relative risks of new or trendy tobacco products, such as snus or hookah. Mindful of industry innovation, tobacco control advocates must continuously update prevention efforts, seeking new strategies to limit promotion, marketing, and use of new and conventional products.

Productivity and production efficiency among small scale irrigated ...

African Journals Online (AJOL)

The study examined productivity and production efficiency among small scale irrigated sugarcane farmers in Niger State, Nigeria using a stochastic translog frontier function. Data for the study were obtained using structured questionnaires administered to 100 randomly selected sugarcane farmers from Paiko and Gurara ...

Leading co-production

DEFF Research Database (Denmark)

Tortzen, Anne

leadership styles executed by public managers affect the quality and public value of co-production processes? The paper argues that publicly initiated co-production initiatives are influenced by conflicting governance logics placing public managers in an institutional cross pressure (Lowndes & Roberts, 2013...... of building networks and relations, developing trust and focusing on empowerment and on the participants' resources to develop innovative solutions Drawing on three qualitative case studies of ‘most likely' co-production cases in Danish municipalities, the study identifies three different leadership styles...... and increase public value (Bovaird & Löffler, 2012; Osborne, 2010). The paper argues that a deeper understanding of the dynamics of co-production can be gained from analyzing the leadership dimension of co-production processes, which has hitherto not been given much attention by co-production researchers...

The economic production lot size model with several production rates

DEFF Research Database (Denmark)

Larsen, Christian

should be chosen in the interval between the demand rate and the production rate, which minimize unit production costs, and should be used in an increasing order. Then, given the production rates, we derive closed form solutions for the optimal runtimes as well as the minimum average cost. Finally we...

Efficiency and Import Penetration on the Productivity of Textile Industry and Textile Products

Directory of Open Access Journals (Sweden)

Catur Basuki Rakhmawan

2012-12-01

Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the average level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

Fission products collecting devices

International Nuclear Information System (INIS)

Matsumoto, Hiroshi

1979-01-01

Purpose: To enable fission products trap with no contamination to coolants and cover gas by the provision of a fission products trap above the upper part of a nuclear power plant. Constitution: Upon fuel failures in a reactor core, nuclear fission products leak into coolants and move along the flow of the coolants to the coolants above the reactor core. The fission products are collected in a trap container and guided along a pipeline into fission products detector. The fission products detector monitors the concentration of the fission products and opens the downstream valve of the detector when a predetermined concentration of the fission products is detected to introduce the fission products into a waste gas processing device and release them through the exhaust pipe. (Seki, T.)

The analysis of consumer preferences residents of Voronezh in respect of products of functional purpose from fruit and berry raw materials

Directory of Open Access Journals (Sweden)

I. P. Shchetilina

2016-01-01

Full Text Available The last decade, the negative trend related to the health status of the population. In the structure of power a significant part of the population are violations. According to scientific research Institute of nutrition in our country commonplace latent forms of vitamin deficiency combined with lack of calcium, iron, iodine. With the aim of increasing the production of food products of mass consumption enriched with minerals and vitamins, the use of vegetable raw materials of the Voronezh region is a priority. The human body for normal functioning requires regular consumption of micronutrients. An important role in biological processes in which food is converted into energy, play a micro- and macroelements and vitamins. They provide the protective functions of the body are involved in tissue renewal. However, micronutrients are not synthesized in the body, and water-soluble vitamins, unlike fat-soluble are easily excreted from the body, so they should regularly come directly from food. In the works of foreign and domestic scientists the development of product functionality has received considerable attention. Special contribution study of academicians V. M. Bosnakovski, V. A. Tutelyan, professor B. P. Sukhanov and others In the development of new types of foods must take into account the views of consumers about new products. The paper presents marketing research of the market of Voronezh the survey. The aim of the study was to identify preferences of consumers of functional products. Analyzed socio-demographic profile of respondents the distribution of respondents by education, age of the interviewee, the frequency of consumption by respondents functional products, the preferences of respondents by frequency of consumption depending on the sex of the respondents. The analysis of preferences for specific groups of products, places to purchase products functional purpose, the reasons that motivate respondents to purchase products of functional

Urinary incontinence products

Science.gov (United States)

... this page: //medlineplus.gov/ency/article/003973.htm Urinary incontinence products To use the sharing features on this ... There are many products to help you manage urinary incontinence . You can decide which product to choose based ...

Production control system specified quality sausage products

Directory of Open Access Journals (Sweden)

A. V. Tokarev

2016-01-01

Full Text Available The problem of management of production target in technological system of production of sausages of the set quality is considered in article. Decomposition of technological system is considered. Functions of management are allocated: formation of an optimum compounding of forcemeat, expert analysis of a compounding, laboratory analysis of a compounding and its statement. Information technology of interaction of these functions is offered. The mathematical problem definition of finding of an optimum compounding meat product with use of possible substitutes of ingredients is presented. This mathematical problem is a classical linear programming problem whose solution has the standard program. Since the manufacture of the finished product are various nonlinear effects are taken into account at the present time it is practically impossible, the methodology provided in this operation "Expert analysis of the formulation" and "Laboratory analysis of the finished product." An example of calculating the optimum alternative base recipe "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. For an alternative formulation demands were made at a cost of meat, the ingredient composition, as well as the final product organoleptic and physic-chemical indicators should comply with regulatory requirements "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. Indicator acid activity (pH calculated stuffing formulation should be in the range 6.0-6.3. As a partial replacement for the main raw material have been proposed acceptable substitutes. It was necessary to calculate on the basis of the formulation "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002 optimal price and quality alternative formulation. As a result of depreciation of the value of alternative stuffing recipe was 14,5 % when all of the restrictions on the consumer properties. The proposed information technology implemented in the software package "Multi

Determination of production biology of Cladocera in a reservoir receiving hyperthermal effluents from a nuclear production reactor

International Nuclear Information System (INIS)

Vigerstad, T.J.

1980-01-01

The effects on zooplankton of residence in a cooling reservoir receiving hyperthermal effluents directly from a nuclear-production-reactor were examined. The design of the study was to compare rates of cladoceran population production at two stations in the winter and summer of 1976 on Par Pond, the cooling reservoir located on the Savannah River Plant, Aiken, SC. One station was located in an area of the reservoir directly receiving hyperthermal effluent (Station MAS), and the second was located about 4 km away in an area where surface temperatures were normal for reservoirs in the general geographical region (Station CAS). The statistical properties of the Edmondson egg ratio model (Edmondson, 1960) were examined to determine if it would be a suitable method for calculating cladoceran production rates for comparison between stations. Based on an examination of the variance associated with standing stock and fecundity measurements and other consideratios, the use of the egg ratio model was abandoned. Instead, a non-parametric comparison between stations of standing stock and fecundity data for Bosmina longirostris, taken for the egg ratio model, were used to observe potential hyperthermal effluent effects. There was a statistically higher incidence of deformed eggs in the Bosmina population at Station MAS in the summer. Bosmina standing stock underwent two large oscillations in the winter and three large oscillations in the summer at Station MAS compared with two in the winter and one in the summer at Station CAS. These results are consistent with almost all other Par Pond studies which have found the two stations to be essentially similar in species composition but with some statistically significant differences in various aspects of the biology of the species

All Plasma Products Are Not Created Equal: Characterizing Differences Between Plasma Products

Science.gov (United States)

2015-06-01

Research and the US Department of Defense. The pooling and solvent detergent treatment processes performed to manufacture the Octaplas and Kedrion products ...All plasma products are not created equal: Characterizing differences between plasma products Philip C. Spinella, MD, Elfaridah Frazier, PhD, Heather... products that may affect efficacy and safety. METHODS: Four different plasma products were analyzed to include fresh frozen plasma (FFP), liquid plasma

COMPETITIVE PRODUCT ADVANTAGES

Directory of Open Access Journals (Sweden)

Adrian MICU

2006-01-01

Full Text Available Cost advantages may be either internal or external. Internal economics of scope, scale, or experience, and external economies of focus or logistical integration, enable a company to produce some products at a lower cost than the competition. The coordination of pricing with suppliers, although not actually economizing resources, can improve the efficiency of pricing by avoiding the incrementalization of a supplier's nonincremental fixed costs and profit. Any of these strategies can generate cost advantages that are, at least in the short run, sustainable. Even cost advantages that are not sustainable, however, can generate temporary savings that are often the key to building more sustainable cost or product advantages later.. Even when a product's physical attributes are not readily differentiable, opportunities to develop product advantages remain. The augmented product that customers buy is more than the particular product or service exchanged. It includes all sorts of ancillary services and intangible relationships that make buying thesame product from one company less difficult, less risky, or more pleasant than buying from a competitor. Superior augmentation of the same basic product can add substantial value in the eyes of consumers, leading them to pay willingly what are often considerable price premiums.

Primary productivity

Digital Repository Service at National Institute of Oceanography (India)

Verlecar, X.N.; Parulekar, A.H.

Photosynthetic production in the oceans in relation to light, nutrients and mixing processes is discussed. Primary productivity in the estuarine region is reported to be high in comparison to coastal and oceanic waters. Upwelling phenomenon...

Extended Producer Responsibility and Product Stewardship for Tobacco Product Waste.

Science.gov (United States)

Curtis, Clifton; Collins, Susan; Cunningham, Shea; Stigler, Paula; Novotny, Thomas E

2014-09-01

This paper reviews several environmental principles, including Extended Producer Responsibility (EPR), Product Stewardship (PS), the Polluter Pays Principle (PPP), and the Precautionary Principle, as they may apply to tobacco product waste (TPW). The review addresses specific criteria that apply in deciding whether a particular toxic product should adhere to these principles; presents three case studies of similar approaches to other toxic and/or environmentally harmful products; and describes 10 possible interventions or policy actions that may help prevent, reduce, and mitigate the effects of TPW. EPR promotes total lifecycle environmental improvements, placing economic, physical, and informational responsibilities onto the tobacco industry, while PS complements EPR, but with responsibility shared by all parties involved in the tobacco product lifecycle. Both principles focus on toxic source reduction, post-consumer take-back, and final disposal of consumer products. These principles when applied to TPW have the potential to substantially decrease the environmental and public health harms of cigarette butts and other TPW throughout the world. TPW is the most commonly littered item picked up during environmental, urban, and coastal cleanups globally.

Production of carboxylic acid and salt co-products

Science.gov (United States)

Hanchar, Robert J.; Kleff, Susanne; Guettler, Michael V.

2014-09-09

This invention provide processes for producing carboxylic acid product, along with useful salts. The carboxylic acid product that is produced according to this invention is preferably a C.sub.2-C.sub.12 carboxylic acid. Among the salts produced in the process of the invention are ammonium salts.

Types of tourism and residents' attitudes: the case of Ibiza

OpenAIRE

José Ramón Cardona

2014-01-01

The types and forms of tourism and, above all, perception and attitude of tourists influence how evolving attitudes of residents. But the vast majority of studies of residents' attitudes discussed the tourism sector as a whole, with few cases that focus on a particular type of supply. The aim of this paper is to analyze whether tourism products with worse or better rating. The main difference between the two surveys used is that effects of the economic crisis are expected in 2011. Residents c...

Sustainable aggregates production : green applications for aggregate by-products.

Science.gov (United States)

2015-06-01

Increased emphasis in the construction industry on sustainability and recycling requires production of : aggregate gradations with lower dust (cleaner aggregates) and smaller maximum sizeshence, increased : amount of quarry by-products (QBs). QBs ...

Improvement of Aspergillus nidulans penicillin production by targeting AcvA to peroxisomes.

Science.gov (United States)

Herr, Andreas; Fischer, Reinhard

2014-09-01

Aspergillus nidulans is able to synthesize penicillin and serves as a model to study the regulation of its biosynthesis. Only three enzymes are required to form the beta lactam ring tripeptide, which is comprised of l-cysteine, l-valine and l-aminoadipic acid. Whereas two enzymes, AcvA and IpnA localize to the cytoplasm, AatA resides in peroxisomes. Here, we tested a novel strategy to improve penicillin production, namely the change of the residence of the enzymes involved in the biosynthesis. We tested if targeting of AcvA or IpnA (or both) to peroxisomes would increase the penicillin yield. Indeed, AcvA peroxisomal targeting led to a 3.2-fold increase. In contrast, targeting IpnA to peroxisomes caused a complete loss of penicillin production. Overexpression of acvA, ipnA or aatA resulted in 1.4, 2.8 and 3.1-fold more penicillin, respectively in comparison to wildtype. Simultaneous overexpression of all three enzymes resulted even in 6-fold more penicillin. Combination of acvA peroxisomal targeting and overexpression of the gene led to 5-fold increase of the penicillin titer. At last, the number of peroxisomes was increased through overexpression of pexK. A strain with the double number of peroxisomes produced 2.3 times more penicillin. These results show that penicillin production can be triggered at several levels of regulation, one of which is the subcellular localization of the enzymes. Copyright © 2014 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

Product plots.

Science.gov (United States)

Wickham, Hadley; Hofmann, Heike

2011-12-01

We propose a new framework for visualising tables of counts, proportions and probabilities. We call our framework product plots, alluding to the computation of area as a product of height and width, and the statistical concept of generating a joint distribution from the product of conditional and marginal distributions. The framework, with extensions, is sufficient to encompass over 20 visualisations previously described in fields of statistical graphics and infovis, including bar charts, mosaic plots, treemaps, equal area plots and fluctuation diagrams. © 2011 IEEE

A Conceptual Model for Production Leveling (Heijunka) Implementation in Batch Production Systems

OpenAIRE

De Araujo , Luciano Fonseca; De Queiroz , Abelardo Alves

2009-01-01

International audience; This paper explains an implementation model for a new method for Production Leveling designed for batch production system. The main structure of this model is grounded on three constructs: traditional framework for Operations Planning, Lean Manufacturing concepts for Production Leveling and case study guidelines. By combining the first and second construct, a framework for Production Leveling has been developed for batch production systems. Then, case study guidelines ...

improving citric acid production from some carbohydrates by-products using irradiated aspergillus niger

International Nuclear Information System (INIS)

Farag, S.S.

2011-01-01

Twenty strains of A. niger were isolated from different sources, screened for their capacity to produce citric acid. All the isolated strains were able to produce citric acid in different quantities at different time intervals i.e. 4, 8 and 12 days on indicator medium. The best incubation period for production for all isolates was 12 days. The most potent strains for production were A 1 , A 4 and A 5 , while A 8 , A 1 6, A 18 and A 19 recorded weak production on that medium. Citric acid productivity were obtained by all strains when using different concentrations of four carbohydrate by-products (maize straw, potato peel wastes, sugar beet pulp and molasses) when each used alone without any additions after 12 days incubation and the production enhanced when the fermentation medium amended with the same concentrations of the mentioned substrates. Type and concentration of carbohydrate by-product affect the production of citric acid by A. niger strains under the study. Increasing substrate concentration led to increase in production, the best concentration for production was 25% for all carbohydrate by-products. As recorded with indicator medium, A 1 , A 4 and A 5 are also the most potent strains for production when growing on the four carbohydrate by-products supplemented to the basal medium, while A 8 , A 6 , A 18 and A 19 recorded the weak production with the carbohydrate by-products used.production of the parental isolates A 1 , A 4 and A 5 on indicator medium were: 0.96, 0.95 and 0.99 (mg/ml) respectively after 12 days incubation, while maximum production by the obtaining resulting isolates (Treated by UV irradiation) were: 1.78, 1.70 and 1.73 (mg/ml) from A 4 T 2 (5 min.), A 4 T 1 (10 min.) and A 1 T 1 (5 min.), respectively.

Advances in production technology

CERN Document Server

2015-01-01

This edited volume contains the selected papers presented at the scientific board meeting of the German Cluster of Excellence on “Integrative Production Technology for High-Wage Countries”,  held in November 2014. The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology. The Aachen perspective on a holistic theory of production is complemented by conference papers from external leading researchers in the fields of production, materials science and bordering disciplines. The target audience primarily comprises research experts and practitioners in the field but the book may also be beneficial for graduate students.

The linkages between photosynthesis, productivity, growth and biomass in lowland Amazonian forests.

Science.gov (United States)

Malhi, Yadvinder; Doughty, Christopher E; Goldsmith, Gregory R; Metcalfe, Daniel B; Girardin, Cécile A J; Marthews, Toby R; Del Aguila-Pasquel, Jhon; Aragão, Luiz E O C; Araujo-Murakami, Alejandro; Brando, Paulo; da Costa, Antonio C L; Silva-Espejo, Javier E; Farfán Amézquita, Filio; Galbraith, David R; Quesada, Carlos A; Rocha, Wanderley; Salinas-Revilla, Norma; Silvério, Divino; Meir, Patrick; Phillips, Oliver L

2015-06-01

Understanding the relationship between photosynthesis, net primary productivity and growth in forest ecosystems is key to understanding how these ecosystems will respond to global anthropogenic change, yet the linkages among these components are rarely explored in detail. We provide the first comprehensive description of the productivity, respiration and carbon allocation of contrasting lowland Amazonian forests spanning gradients in seasonal water deficit and soil fertility. Using the largest data set assembled to date, ten sites in three countries all studied with a standardized methodology, we find that (i) gross primary productivity (GPP) has a simple relationship with seasonal water deficit, but that (ii) site-to-site variations in GPP have little power in explaining site-to-site spatial variations in net primary productivity (NPP) or growth because of concomitant changes in carbon use efficiency (CUE), and conversely, the woody growth rate of a tropical forest is a very poor proxy for its productivity. Moreover, (iii) spatial patterns of biomass are much more driven by patterns of residence times (i.e. tree mortality rates) than by spatial variation in productivity or tree growth. Current theory and models of tropical forest carbon cycling under projected scenarios of global atmospheric change can benefit from advancing beyond a focus on GPP. By improving our understanding of poorly understood processes such as CUE, NPP allocation and biomass turnover times, we can provide more complete and mechanistic approaches to linking climate and tropical forest carbon cycling. © 2015 John Wiley & Sons Ltd.

Smart consumer products with a pathfinder product development strategy

Science.gov (United States)

Robertson, Alec

1994-09-01

It is generally acknowledged that technologies diffuse through industry and that the rate of diffusion varies both within different industries and according to the circumstances. Innovation is a process involving risk, especially during the adoption and adaptation of a powerful new technology. Central to a consumer products success using new technology is the quality of their designs and the nature of their forms. Form is of prime importance in influencing the purchasing decisions of consumers and it is also influential in determining the relationships between people in its use environment. The acceptance of a new product into the world is often unduly ad hoc. Many failures are created for each success and there are few guidelines to assist the formulation of a strategy for creating an appropriate form. It is suggested below that success of consumer products incorporating 'smart structures' may be determined not only by the function of products and systems, but also by the form they take. The definition of a desirable product form depends entirely on the point of view taken: technological, commercial, ecological, cultural, and social. However any design using new will incorporate the old and the new. The probability of acceptance of a new product is enhanced by maintaining a fine balance between imaginative and creative form and that with which people are familiar and prefer: a new design may be rejected if it is too novel and unfamiliar, or too traditional. The acceptance of a new product and its subsequent development depends on the success designers and engineers have when dealing with the initial forms, particularly using new technology such as 'smart structures'.

Modelling attending physician productivity in the emergency department: a multicentre study.

Science.gov (United States)

Joseph, Joshua W; Davis, Samuel; Wilker, Elissa H; Wong, Matthew L; Litvak, Ori; Traub, Stephen J; Nathanson, Larry A; Sanchez, Leon D

2018-05-01

Emergency physician productivity, often defined as new patients evaluated per hour, is essential to planning clinical operations. Prior research in this area considered this a static quantity; however, our group's study of resident physicians demonstrated significant decreases in hourly productivity throughout shifts. We now examine attending physicians' productivity to determine if it is also dynamic. This is a retrospective cohort study, conducted from 2014 to 2016 across three community hospitals in the north-eastern USA, with different schedules and coverage. Timestamps of all patient encounters were automatically logged by the sites' electronic health record. Generalised estimating equations were constructed to predict productivity in terms of new patients per shift hour. 207 169 patients were seen by 64 physicians over 2 years, comprising 9822 physician shifts. Physicians saw an average of 15.0 (SD 4.7), 20.9 (SD 6.4) and 13.2 (SD 3.8) patients per shift at the three sites, with 2.97 (SD 0.22), 2.95 (SD 0.24) and 2.17 (SD 0.09) in the first hour. Across all sites, physicians saw significantly fewer new patients after the first hour, with more gradual decreases subsequently. Additional patient arrivals were associated with greater productivity; however, this attenuates substantially late in the shift. The presence of other physicians was also associated with slightly decreased productivity. Physician productivity over a single shift follows a predictable pattern that decreases significantly on an hourly basis, even if there are new patients to be seen. Estimating productivity as a simple average substantially underestimates physicians' capacity early in a shift and overestimates it later. This pattern of productivity should be factored into hospitals' staffing plans, with shifts aligned to start with the greatest volumes of patient arrivals. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved

Development of a unique product: Perception of guests in Tourism in vineyard cottages on the local environment

Directory of Open Access Journals (Sweden)

Le- Marija Colarič-Jakše

2017-11-01

Full Text Available Purpose and Originality: Tourism in vineyard cottages is new, authentic, unique tourism product, which involves the area of wine-growing land Posavje, with districts of Dolenjska (Lower Carniola Region, Bela Krajina and Obsotelje-Kozjansko, where are the wine-growing areas with vineyards and vineyard cottages. Tourists in vineyard cottages bring economic benefits to the local community. Method: With the research we gained the information, where local residents can see positive and where negative impacts of guests who come to the vineyard cottages. As the part of descriptive approach in our research we used a method of a description about the opinion of local residents on impact of arriving tourists in tourist vineyard cottages on the local environment and the method of a compilation discoveries, observations and results. In the activities of analytical approach we are going on the base about the results of questioning individual cases and conclusion about opinion of local inhabitants in the area of marketing the tourism product Tourism in vineyard cottages. Results: Considering the results of the research, individual interviews with guests in the area of product Tourism in vineyard cottages and responses in the local environment, we evaluate, that the product has unique, authentic, original and attractive approach with all the possibilities, that it becomes one of the most recognizable, wanted and paraded integral product of Slovenian tourism. Society: New, innovative, attractive, unique and authentic product Tourism in vineyard cottages, which is developed in the wine-growing region Posavje, it has an extremely great potential, because it is one of the most recognizable forms of tourism in the countryside areas, and it has extra perspective with the creating local stories and connecting into the integral tourism products. Limitations / further research: It is necessary, that also other owners of the vineyard cottages, who are not included into

Polling, production & priorities

NARCIS (Netherlands)

Winands, E.M.M.

2007-01-01

Polling, Production & Priorities The present monograph focuses on the so-called stochastic economic lot scheduling problem (SELSP), which deals with the make-to-stock production of multiple standardized products on a single machine with limited capacity under random demands, possibly random setup

Production of highly unsaturated fatty acids using agro-processing by-products

CSIR Research Space (South Africa)

Jacobs, A

2008-11-01

Full Text Available The South African agro-processing industry generates millions of tons of cereal derived by-products annually. The by-products from biofuel production are expected to increase these volumes dramatically. Highly unsaturated fatty acids (HUFA...

Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder

Energy Technology Data Exchange (ETDEWEB)

Kerrigan, P. [Building Science Corporation, Somerville, MA (United States)

2014-03-01

Building Science Corporation (BSC) worked directly with the David Weekley Homes - Houston division to develop a cost-effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses in preparation for the upcoming code changes in 2015. This research project addressed the following questions: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost?

Evaluating the Impact of a New Product on the Sales of other Products

OpenAIRE

Julian Andreev Vasilev

2014-01-01

The purpose of this article is to evaluate the impact of a new product on the sales of other products. Launching a new product may lead to increase or decrease of sales in the products of the same group. Customers may continue buying standard products or they may be oriented to new products. New products may cause internal competition. Statistical methods are applied. Time series analysis is used. Transactional database of a confectionary factory is the main source of data. The time series an...

MANAGING PRODUCT SAFETY SYSTEM HACCP ON THE EXAMPLE OF BEET-SUGAR PRODUCTION

Directory of Open Access Journals (Sweden)

V. A. Golybin

2015-01-01

Full Text Available The most effective safety management system of food production in all industrialized countries in the world recognized by the system based on the principles of HACCP. In Russia, the conformity assessment carried out by the HACCP system certification. The essence of the HACCP system is to identify and control the critical points. Critical Control Point – this is the stage of the process, which is subject to control for hazard identification and risk management in order to avoid the production of unsafe products. Implementation of HACCP system allows to tighten and coordinate the quality control system, which will improve the competitiveness of the products produced in the sugar market in Russia and abroad. In the early stages of food production HACCP system to prevent the occurrence of danger. It is based on the preventive approach to ensuring quality and safety in the production process, and can also be used in the development of new products. HACCP system is based on seven main principles to ensure the implementation and management of the system in production. 1. Creation of a working group of the coordinator and the technical secretary and various consultants. 2. Information on materials and products, in this case of sugar beet and sugar. 3. Information about the production. 4. Risk analysis of the available chemical, physical and microbiological factors. To determine the critical control points according to the results obtained for each factor is determined by a special chart the extent of its accounting. The need to consider the potential hazard is determined by the order in which area it has got. 5. The production program of mandatory preliminary activities in the production of sugar. 6. Determination of critical control points. 7. Making worksheets HACCP. It is shown that the use of HACCP in sugar beet production has several advantages.

To process or not to process? Factors enabling and constraining shea butter production and income in Burkina Faso

DEFF Research Database (Denmark)

Pouliot, Mariève; Elias, Marlène

2013-01-01

Processing of environmental products by rural households in developing countries is often considered a way to lift poor natural resource-dependent households out of poverty by increasing the returns to labour of their harvesting activities. Still, the bulk of environmental products in developing...... of locality of residence, defined as place of residence along the rural–urban continuum, on shea butter processing and income. We demonstrate that, among members of a shea butter producer Union, women living in urban areas produce significantly larger quantities of shea butter for sale to the Union and earn...... superior revenues from these sales than their rural counterparts. We relate these urban–rural discrepancies to the physical and socio-economic conditions that characterise life in different localities and propose policy recommendations based on our findings....

The Virtual Product-Process Design Laboratory for Structured Chemical Product Design and Analysis

DEFF Research Database (Denmark)

Mattei, Michele; Yunus, Nor Alafiza Binti; Kalakul, Sawitree

2014-01-01

The objective of this paper is to present new methods for design of chemicals based formulated products and their implementation in the software, the Virtual Product-Process Design Laboratory. The new products are tailor-made blended liquid products and emulsion-based products. The new software...

Modeling intermediate product selection under production and storage capacity limitations in food processing

DEFF Research Database (Denmark)

Kilic, Onur Alper; Akkerman, Renzo; Grunow, Martin

2009-01-01

In the food industry products are usually characterized by their recipes, which are specified by various quality attributes. For end products, this is given by customer requirements, but for intermediate products, the recipes can be chosen in such a way that raw material procurement costs and pro...... with production and inventory planning, thereby considering the production and storage capacity limitations. The resulting model can be used to solve an important practical problem typical for many food processing industries.......In the food industry products are usually characterized by their recipes, which are specified by various quality attributes. For end products, this is given by customer requirements, but for intermediate products, the recipes can be chosen in such a way that raw material procurement costs...... and processing costs are minimized. However, this product selection process is bound by production and storage capacity limitations, such as the number and size of storage tanks or silos. In this paper, we present a mathematical programming approach that combines decision making on product selection...

Production Leveling (Heijunka) Implementation in a Batch Production System: A Case Study

OpenAIRE

Araujo , Luciano Fonseca; Queiroz , Abelardo Alves

2009-01-01

International audience; This paper presents a case study of an implementation of a new method for Production Leveling designed for batch production. It includes prioritizing criteria of products and level production plan. Moreover, it was applied on a subsidiary of a multinational enterprise located on Brazil, which manufacturing processes comprise batch production in a make-to-stock policy. Regarding a qualitative assessment, evidences show that the company had deficient practices related to...

Economic Feasibility of Functional Meat Products for Commercial Production in India

Directory of Open Access Journals (Sweden)

Varalakshmi Kandanuri

2017-07-01

Full Text Available This paper analyses the production of functional chicken meat products from economic perspectives. It analyses and compares the economics and investment feasibility on different size groups of processing plants in India. The primary data on input use and output yield were taken from studies of NRCM and data was analysed using economic analysis and investment appraisal techniques like NPV, IRR(%, BC ratio, and Break even analysis. The results indicated that the cost of production of functional products was 5.2 and 5.18 and 4.59 US dollars per kg on small, medium and large scale units respectively. All the processing units are found to be economically feasible with NPV of US$ 12727, 64661 and 153703, IRR of 26%,31% and 42% and B-C ratio was estimated as 1.56, 1.78 and 2.29 for small, medium and large scale units respectively. Economies of scale is evident form all perspectives like production costs, profits, discounting measures and breakeven point. The study found the feasibility of functional meat products in India for commercial production.

Ergonomic Product Design 21

International Nuclear Information System (INIS)

Kwon, Yeong Guk

1996-09-01

This book explains basic of ergonomic product design with human engineering, image engineering and strategy of that design, ergonomic industrial design, which includes product design to access the human engineering in development of new product and customer satisfaction, application technology of image engineering, industrial design of human engineering item and strategy of human engineering, a good ergonomic design. It also tells of examples of convenient design for human such as hardware product and software product in automobile, telephones for ergonomic product in the future, new goods and new technology, ergonomic product in house and office, and computers and robots in the future.

Optimal Product Placement.

Science.gov (United States)

Hsu, Chia-Ling; Matta, Rafael; Popov, Sergey V; Sogo, Takeharu

2017-01-01

We model a market, such as an online software market, in which an intermediary connects sellers and buyers by displaying sellers' products. With two vertically-differentiated products, an intermediary can place either: (1) one product, not necessarily the better one, on the first page, and the other hidden on the second page; or (2) both products on the first page. We show that it can be optimal for the intermediary to obfuscate a product-possibly the better one-since this weakens price competition and allows the sellers to extract a greater surplus from buyers; however, it is not socially optimal. The choice of which one to obfuscate depends on the distribution of search costs.

Thermophilic Biohydrogen Production

DEFF Research Database (Denmark)

Karakashev, Dimitar Borisov; Angelidaki, Irini

2011-01-01

Dark fermentative hydrogen production at thermophilic conditions is attractive process for biofuel production. From thermodynamic point of view, higher temperatures favor biohydrogen production. Highest hydrogen yields are always associated with acetate, or with mixed acetate- butyrate type...... fermentation. On the contrary the hydrogen yield decreases, with increasing concentrations of lactate, ethanol or propionate. Major factors affecting dark fermentative biohydrogen production are organic loading rate (OLR), pH, hydraulic retention time (HRT), dissolved hydrogen and dissolved carbon dioxide...... concentrations, and soluble metabolic profile (SMP). A number of thermophilic and extreme thermophilic cultures (pure and mixed) have been studied for biohydrogen production from different feedstocks - pure substrates and waste/wastewaters. Variety of process technologies (operational conditions...

Production planning of a perishable product with lead time and non-stationary demand

NARCIS (Netherlands)

Pauls-Worm, K.G.J.; Haijema, R.; Hendrix, E.M.T.; Rossi, R.; Vorst, van der J.G.A.J.

2012-01-01

We study a production planning problem for a perishable product with a fixed lifetime, under a service-level constraint. The product has a non-stationary stochastic demand. Food supply chains of fresh products like cheese and several crop products, are characterised by long lead times due to

Validation of Product Properties Considering a High Variety of Complex Products

OpenAIRE

Kortler, S.;Kohn, A.;Lindemann, U.

2017-01-01

Validation processes are becoming more and more complex. Due to rising technical capabilities and a wide variety of customer requirements, OEMs are increasing their product variety in order to increase profits. According to the various characteristics of subcontracted components involved in complex products, the product variety can be very high. The impacts of the involved subcontracted components on the composed product variety during the product’s application are difficult to predict. This ...

Enriching step-based product information models to support product life-cycle activities

Science.gov (United States)

Sarigecili, Mehmet Ilteris

The representation and management of product information in its life-cycle requires standardized data exchange protocols. Standard for Exchange of Product Model Data (STEP) is such a standard that has been used widely by the industries. Even though STEP-based product models are well defined and syntactically correct, populating product data according to these models is not easy because they are too big and disorganized. Data exchange specifications (DEXs) and templates provide re-organized information models required in data exchange of specific activities for various businesses. DEXs show us it would be possible to organize STEP-based product models in order to support different engineering activities at various stages of product life-cycle. In this study, STEP-based models are enriched and organized to support two engineering activities: materials information declaration and tolerance analysis. Due to new environmental regulations, the substance and materials information in products have to be screened closely by manufacturing industries. This requires a fast, unambiguous and complete product information exchange between the members of a supply chain. Tolerance analysis activity, on the other hand, is used to verify the functional requirements of an assembly considering the worst case (i.e., maximum and minimum) conditions for the part/assembly dimensions. Another issue with STEP-based product models is that the semantics of product data are represented implicitly. Hence, it is difficult to interpret the semantics of data for different product life-cycle phases for various application domains. OntoSTEP, developed at NIST, provides semantically enriched product models in OWL. In this thesis, we would like to present how to interpret the GD & T specifications in STEP for tolerance analysis by utilizing OntoSTEP.

Engineering microbial cell factories for the production of plant natural products: from design principles to industrial-scale production.

Science.gov (United States)

Liu, Xiaonan; Ding, Wentao; Jiang, Huifeng

2017-07-19

Plant natural products (PNPs) are widely used as pharmaceuticals, nutraceuticals, seasonings, pigments, etc., with a huge commercial value on the global market. However, most of these PNPs are still being extracted from plants. A resource-conserving and environment-friendly synthesis route for PNPs that utilizes microbial cell factories has attracted increasing attention since the 1940s. However, at the present only a handful of PNPs are being produced by microbial cell factories at an industrial scale, and there are still many challenges in their large-scale application. One of the challenges is that most biosynthetic pathways of PNPs are still unknown, which largely limits the number of candidate PNPs for heterologous microbial production. Another challenge is that the metabolic fluxes toward the target products in microbial hosts are often hindered by poor precursor supply, low catalytic activity of enzymes and obstructed product transport. Consequently, despite intensive studies on the metabolic engineering of microbial hosts, the fermentation costs of most heterologously produced PNPs are still too high for industrial-scale production. In this paper, we review several aspects of PNP production in microbial cell factories, including important design principles and recent progress in pathway mining and metabolic engineering. In addition, implemented cases of industrial-scale production of PNPs in microbial cell factories are also highlighted.

CONSIDERATIONS UPON MILK AND DAIRY PRODUCT PRODUCTION IN THE U.S.A.

Directory of Open Access Journals (Sweden)

AGATHA POPESCU

2008-05-01

Full Text Available The paper aimed to present the evolution of milk production and dairy products in the USA during the period 2004-2006, based on USDA Statistics. The USA is a top produce of milk and dairy products in the world. Milk production accounted for 181,798 Millions Pounds in the year 2006. Its continuously increase during the last years has been positively influenced by the increasing number of dairy cows and average milk yield . The top states are California, Wisconsin, New York, Idaho and Pennsylvania, which all together achieve about 54 % of the country milk production. Over 99.37 % of Milk Production is marketed. Considering all milk marketings, Million USD 23,422 cash receiptscould be obtained from a dairy farm in the year 2006. The average return per Cwt was about USD 13 in 2006 . Milk is processed by about 1,000 manufacturing plants in a large variety of dairy products. Cheese production was about 9.5 Billion Pounds in the last analyzed years. The US also produces important amounts of butter , yogurt, ice cream etc. About 8.3 % of the US dairy products are exported, the most markets being Japan, Mexico and Canada.

How companies embed non-quantifiable product qualities through their product development process

OpenAIRE

Guldbrandsen, Marianne Norden

2006-01-01

Many consumer products have reached a high level of technical product quality. Rapid adoption of new technologies and access to a global market means that markets are getting saturated. This means that technical differentiation is often not enough to sell a product and products compete more and more on intangible product qualities - these are meant to delight, bring pleasure, be easy to use and to create an experience. These qualities are often difficult to measure in the pr...

Product Configuration Systems and Consequences for Productivity and Quality

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard; Edwards, Kasper

2004-01-01

with informations about expected and realised costs and benefits in implemented PCS's we have the following results: the three highest aggregated scoring expected benefits are: 1)improved quality in specifications, 2)lower turnaround time, and 3)using less resources.The results achieved are in accordance......Product Configuration Systems (PCS) are systems to produce quotations to potential buyers of the products an enterprise produces. Typically the products are complex and will first be produced according to specific needs from the customers. From twelve case studies in Danish industry...

Distribution of some trace elements in biosubstrates of workers occupied in the production of mineral nitrogenous phosphate fertilizers

International Nuclear Information System (INIS)

Gorbunov, A.V.; Lyapunov, S.M.; Okina, O.I.; Frontasyeva, M.V.; Pavlov, S.S.

2005-01-01

The data on the content of some trace elements typical for the production of nitrogeneous phosphate fertilizers (F, Sr, rare-earth elements), as well as heavy and toxic metals in industrial products, occupational air, drinking water and bio substrates (urine, hair) of the factory workers are presented. The correlations between the content of fluorine in urine and hair of workers and between the content of fluorine, length of service and age, have been shown. The correlation dependence between the content of F in bio substrates and a number of trace elements typical for the given type of production has been evaluated. The comparison of the morbidity and character of diseases of the factory workers and of the local residents unoccupied in the production has been made

Simulation Study of a Vehicle Production Line for Productivity Improvement

Directory of Open Access Journals (Sweden)

M.F.F. Ab Rashid

2015-06-01

Full Text Available This paper presents the study of a motorcycle frame production line in a particular company in Malaysia. Due to the high demand, the company needs to increase its production by at least 12% compared with current output. In order to improve productivity, the production-floor data was collected and simulated using the discrete event simulation approach. Later, a number of suggestions for improvement were simulated to identify the effect of the suggestions on productivity. In addition, cost analysis was also undertaken to identify the profit margin for a particular period of time for each suggestion. Simulation results indicate that there are three suggestions that are able to fulfill the 12% volume increment. In the short term, the suggestion to hire an assistant line leader will give instant effect to the profit. Meanwhile, for the medium term, Poka-yoke will give higher profit compared with the others, while in the long term, SOP (standard operating procedure implementation will yield a better profit margin. In future, the simulation of a dynamic demand model for this product is suggested to cope with new trends in the market.

Principles and practices of lean production applied in a metal structures production system

OpenAIRE

Carvalho, Rogério; Alves, Anabela Carvalho; Lopes, Isabel da Silva

2011-01-01

This paper presents a work undertaken in a metal structures production system in a company producing several assorted products for the civil construction. The work aim was to improve the production process, solving several productive problems encountered in the production system, such as: deliveries delays, long lead times, too many material handling, high stocks, errors and defects in metal structures assembly and production, and unnecessary motions. The identified problems were analyzed and...

Entropy Production and Fluctuation Theorems for Active Matter

Science.gov (United States)

Mandal, Dibyendu; Klymko, Katherine; DeWeese, Michael R.

2017-12-01

Active biological systems reside far from equilibrium, dissipating heat even in their steady state, thus requiring an extension of conventional equilibrium thermodynamics and statistical mechanics. In this Letter, we have extended the emerging framework of stochastic thermodynamics to active matter. In particular, for the active Ornstein-Uhlenbeck model, we have provided consistent definitions of thermodynamic quantities such as work, energy, heat, entropy, and entropy production at the level of single, stochastic trajectories and derived related fluctuation relations. We have developed a generalization of the Clausius inequality, which is valid even in the presence of the non-Hamiltonian dynamics underlying active matter systems. We have illustrated our results with explicit numerical studies.

GROWTH PERFORMANCE AND PRODUCTIVITY OF RUBBER & PLASTIC PRODUCTS INDUSTRY IN PUNJAB

Directory of Open Access Journals (Sweden)

GULSHAN KUMAR

2010-01-01

Full Text Available Present study is an endeavour to investigate growth pattern and productivity trends in small scale rubber and plastic products industry of Punjab. The growth of industry has been gauged in terms of variables - number of units, fixed investment, employment and production. Yearly growth rates have been computed to catch year- to- year fluctuations in growth and compound annual growth rates (CAGRs have been worked out to ascertain the impact of the policies of liberalized regime on growth of this industry. Productivity trends have been sketched in terms of partial factor productivities of labour and capital. In order to understand the strengths and weaknesses of the industry, SWOT analysis has been conducted. The study revealed that the liberalisation has promoted the use of capital intensive and labour saving techniques of production leading to a dismal growth of employment and sluggish growth of number of units.

Health products inspection

International Nuclear Information System (INIS)

Stoltz, M.

2009-01-01

To protect public health, the Health Products Inspection is a public service mission where the application of regulations concerning activities on human health products and cosmetic products is verified. This mission permits a global approach to assess the health products risk-based benefit and, in monitoring by laboratory testing and by on site inspections, to verify their compliance with appropriate regulations. The seventy five inspectors perform about eight hundred inspections per year, in France and abroad. These inspections are related to data provided in the health products assessment and also to manufacturing and delivery practices. The French inspection body is also involved in the training of foreign inspectors and in the harmonization of national, European and international practices either for operators than for the competent authorities. (author)

Chemical Product Design

DEFF Research Database (Denmark)

Gani, Rafiqul

2004-01-01

This paper highlights for a class of chemical products, the design process, their design with respect to the important issues, the need for appropriate tools and finally, lists some of the challenges and opportunities for the process systems engineering (PSE)/computer-aided process engineering...... (CAPE) community. The chemical products considered belong to the following types: chemical/biochemical/agrochemical products, coatings and solvents, food (nutraceuticals), HIM (household, industrial and institutional), personal care, pharmaceuticals and drugs. The challenges and opportunities...... are highlighted in terms of the needs for multi-level modeling with emphasis on property models that are suitable for computer-aided applications, flexible solution strategies that are able to solve a large range of chemical product design problems and finally, a systems chemical product design framework...

Production and economic characteristics of sheep production on the island of Pag

Directory of Open Access Journals (Sweden)

Marina Krvavica

2012-03-01

Full Text Available The aim of the research was to learn from a survey about the production and economic characteristics of sheep production as well as economic position and developmental orientation of sheep breeders on the island of Pag. Data on production and economic characteristics of sheep production on the island of Pag were collected from a survey and processed through relevant descriptive statistics methods. The respondents have on average 47 breeding sheep, 2 rams and 9 sheep intended for flock renewal rate (not older than one year; which means an average flock has 58 sheep. The average total income from sheep production in 2009 was 72,460.10 HRK. The average total production costs in 2009 were 13,260.10 HRK, including the costs of fodder and veterinary services. All farms achieved positive financial results of 59,199.90 HRK in average. As many as three quarters of respondents indicated profitability of sheep production as the main motivation to engage in sheep production; very few indicated that heritage and inability to do other jobs were the main motivation. Important limiting factors for future development of sheep breeding on the island of Pag in most farms are lack of potential heirs and high average age of farm holders. Regarding the effects of joining the European Union, half the breeders intend to improve their production and harmonise it with the EU requirements and standards; one quarter of them intend to keep the existing production capacity; and another quarter intend to quit with production.

Novel technique for coal pyrolysis and hydrogenation product analysis

Energy Technology Data Exchange (ETDEWEB)

Pfefferle, L.D.; Boyle, J.

1993-03-15

A microjet reactor coupled to a VUV photoionization time-of-flight mass spectrometer has been used to obtain species measurements during high temperature pyrolysis and oxidation of a wide range of hydrocarbon compounds ranging from allene and acetylene to cyclohexane, benzene and toluene. Initial work focused on calibration of the technique, optimization of ion collection and detection and characterization of limitations. Using the optimized technique with 118 nm photoionization, intermediate species profiles were obtained for analysis of the hydrocarbon pyrolysis and oxidation mechanisms. The soft'' ionization, yielding predominantly molecular ions, allowed the study of reaction pathways in these high temperature systems where both sampling and detection challenges are severe. Work has focused on the pyrolysis and oxidative pyrolysis of aliphatic and aromatic hydrocarbon mixtures representative of coal pyrolysis and hydropyrolysis products. The detailed mass spectra obtained during pyrolysis and oxidation of hydrocarbon mixtures is especially important because of the complex nature of the product mixture even at short residence times and low primary reactant conversions. The combustion community has advanced detailed modeling of pyrolysis and oxidation to the C4 hydrocarbon level but in general above that size uncertainties in rate constant and thermodynamic data do not allow us to a priori predict products from mixed hydrocarbon pyrolyses using a detailed chemistry model. For pyrolysis of mixtures of coal-derived liquid fractions with a large range of compound structures and molecular weights in the hundreds of amu the modeling challenge is severe. Lumped models are possible from stable product data.

Development of Production Control in Small Batch Production

Directory of Open Access Journals (Sweden)

Németh Péter

2016-01-01

Full Text Available Our aim with this paper is to develop a new performance measurement and control system for small batch production in the automotive industry. For this reason, we present our previous research results for warehouse performance measurement and adopt its methodology to production control. The proposed method is based on artificial intelligence (neural networks.

Product, Organizational and Performance Effects of Product Modularity

DEFF Research Database (Denmark)

Boer, Henrike Engele Elisabeth

2014-01-01

beyond these industries. To be able to establish whether firms not part of these industries would experience the same performance effects, survey research will be needed. To support future survey research, this paper proposes an operationalization of product modularity and details the link between...... product modularity and firm performance, to support the future development of measures and hypotheses....

Nephrotoxicity of Natural Products.

Science.gov (United States)

Nauffal, Mary; Gabardi, Steven

2016-01-01

The manufacture and sale of natural products constitute a multi-billion dollar industry. Nearly a third of the American population admit to using some form of complementary or alternative medicine, with many using them in addition to prescription medications. Most patients fail to inform their healthcare providers of their natural product use and physicians rarely inquire. Annually, thousands of natural product-induced adverse events are reported to Poison Control Centers nationwide. Natural product manufacturers are not responsible for proving safety and efficacy, as the FDA does not regulate them. However, concerns exist surrounding the safety of natural products. This review provides details on natural products that have been associated with renal dysfunction. We have focused on products that have been associated with direct renal injury, immune-mediated nephrotoxicity, nephrolithiasis, rhabdomyolysis with acute renal injury, hepatorenal syndrome, and common adulterants or contaminants that are associated with renal dysfunction. The potential for natural products to cause renal dysfunction is justifiable. It is imperative that natural product use be monitored closely in all patients. Healthcare practitioners must play an active role in identifying patients using natural products and provide appropriate patient education. © 2016 S. Karger AG, Basel.

Dictionaries for text production

DEFF Research Database (Denmark)

Fuertes-Olivera, Pedro; Bergenholtz, Henning

2018-01-01

Dictionaries for Text Production are information tools that are designed and constructed for helping users to produce (i.e. encode) texts, both oral and written texts. These can be broadly divided into two groups: (a) specialized text production dictionaries, i.e., dictionaries that only offer...... a small amount of lexicographic data, most or all of which are typically used in a production situation, e.g. synonym dictionaries, grammar and spelling dictionaries, collocation dictionaries, concept dictionaries such as the Longman Language Activator, which is advertised as the World’s First Production...... Dictionary; (b) general text production dictionaries, i.e., dictionaries that offer all or most of the lexicographic data that are typically used in a production situation. A review of existing production dictionaries reveals that there are many specialized text production dictionaries but only a few general...

SMART Product Innovation

DEFF Research Database (Denmark)

Cramer-Petersen, Claus L.; Ahmed-Kristensen, Saeema; Li, Xuemeng

2016-01-01

. The ambition of The Danish Industry Foundation and The Kata Foundation was to develop a method; a robust and specific approach to ensure that product innovation in Danish enterprises in practice would result in products of the highest quality, producible at lower costs and profitable at competitive prices...... products to our neighboring countries continues to suffer. The customers’ financial capacity has been reduced and cheaper products from Asia and other regions have found their way into our local markets. Competition is fierce – especially pricewise. This was the starting point for the SMART project...

Sustainable hydrogen production

Energy Technology Data Exchange (ETDEWEB)

Block, D.L.; Linkous, C.; Muradov, N.

1996-01-01

This report describes the Sustainable Hydrogen Production research conducted at the Florida Solar Energy Center (FSEC) for the past year. The report presents the work done on the following four tasks: Task 1--production of hydrogen by photovoltaic-powered electrolysis; Task 2--solar photocatalytic hydrogen production from water using a dual-bed photosystem; Task 3--development of solid electrolytes for water electrolysis at intermediate temperatures; and Task 4--production of hydrogen by thermocatalytic cracking of natural gas. For each task, this report presents a summary, introduction/description of project, and results.

Banana production systems: identification of alternative systems for more sustainable production.

Science.gov (United States)

Bellamy, Angelina Sanderson

2013-04-01

Large-scale, monoculture production systems dependent on synthetic fertilizers and pesticides, increase yields, but are costly and have deleterious impacts on human health and the environment. This research investigates variations in banana production practices in Costa Rica, to identify alternative systems that combine high productivity and profitability, with reduced reliance on agrochemicals. Farm workers were observed during daily production activities; 39 banana producers and 8 extension workers/researchers were interviewed; and a review of field experiments conducted by the National Banana Corporation between 1997 and 2002 was made. Correspondence analysis showed that there is no structured variation in large-scale banana producers' practices, but two other banana production systems were identified: a small-scale organic system and a small-scale conventional coffee-banana intercropped system. Field-scale research may reveal ways that these practices can be scaled up to achieve a productive and profitable system producing high-quality export bananas with fewer or no pesticides.

Probiotic fermented dairy products

OpenAIRE

Adnan Tamime; Rajka Božanić; Irena Rogelj

2003-01-01

Fermented dairy products are the most popular vehicle used in theindustry for the implantation of the probiotic microflora in humans. Therefore this paper provides an overview of new knowledge on probiotic fermented dairy products. It involves historical developments, commercial probiotic microorganisms and products, and their therapeutic properties, possibilities of quality improvement of different types of newly developed fermented dairy products together with fermented goat’s milk products.

Measuring green productivity of country: A generlized metafrontier Malmquist productivity index approach

International Nuclear Information System (INIS)

Yu-Ying Lin, Eugene; Chen, Ping-Yu; Chen, Chi-Chung

2013-01-01

This paper measures environmental productivity in 70 countries over the period 1981–2007. Differences in green (environmental) productivity growth across countries under distinct country specific production frontier are measured using directional distance function model, which incorporates desirable output (GDP) and undesirable output (CO 2 emissions). The metafrontier which envelops the two country groups, developed countries and developing countries, are estimated using balanced panel data for the sample countries over the study period. A parametric method is used to compute technical efficiency change, technical change, and scale efficiency change, which aggregate to the generalized metafrontier Malmquist productivity index. The overall results indicated the two country groups operated under distinct stochastic production frontiers and therefore used different production technologies. It is found that developing countries achieved higher growth in their average environmental productivity relative to the metafrontier. Thus the results coincide with the convergence growth theory

Resolving traceability issues of product derivation for software product lines

OpenAIRE

Abid, Saad bin

2009-01-01

peer-reviewed Dealing with traceability management issues during model based product derivation in large complex industrial SPL is error prone due to the lack of tool support. As a result traceability management between connected models emerges as an important research topic. In this position paper, we discuss research challenges as scenarios from developed example product line and give recommendations on resolving traceability issues during product derivation. We also discuss initial idea...

Study of by-products of agro-food industries which could be used for bio-fuel production (animal fat, used food oils, and wine production by-products). Synthesis of the final report

International Nuclear Information System (INIS)

Gomy, Catherine; Thonier, Gregoire; Gagnepain, Bruno; Mhiri, Tarek

2015-04-01

As the Renewable Energy directive proposes the implementation of incentive arrangements for the production of bio-fuels from biomass, this report proposes a synthesis of a study which addressed three by-products of agro-food industry and of catering (collective, traditional, fast) which can help to reach objectives of energy production from biomass: used food oils, rendered animal fat of category 1 and 2, and vinification by-products (grape marc, lees, sludge). The objectives were to quantify, at the French national and regional levels, present resources and uses for these three by-products, non-valorised volumes and thus potentially available volumes for the production of liquid bio-fuels, to identify present actors and their interactions, and to study the potential of local production of liquid bio-fuels. The study comprised a comprehensive analysis of production and valorisation sectors for the three addressed types of by-products, and an identification of recent experiments implemented for the production of liquid bio-fuels. This synthesis states the lessons learned from the study of these three different sectors, and proposes recommendations for further developments

[Legislative regulation of production and turnover of products for people with different diseases].

Science.gov (United States)

Pritul'skaia, N V; Motuzka, Iu N; Antiushko, D L

2013-01-01

This article presents results of analysis of existing regulatory documents and approaches to the legislative regulation of production and turnover of special dietary products for people with specific diseases in EU, Ukraine and Russian Federation. According to the EU legislation, production and turnover of food products for nutritional support of people during specific diseases and the rehabilitation period are regulated by the Commission Directive 1999/21/EC, 2009/39/ES, by Regulation Commission (EU) No 953/2009 and documents of Codex Committee. Special food products for people with specific diseases in Ukrainian legislation are classified as nutrition products for special dietary use and are regulated by the following Laws of Ukraine "On the safety and quality of food", "On ensuring of sanitary and epidemiological welfare of the population", "On Consumer Rights Protection", "On advertising" and by other non-legislative acts. According to the current legislation of the Russian Federation, the products for people with specific diseases are classified as healthy dietary food products. The basis of the legal framework are federal laws "On the quality and safety of food", "On the sanitary-epidemiological welfare of the populations", "On technical regulations and technical regulations of the Customs Union "On Food Safety" and "On the safety of certain types of specialized food products, including healthy dietary food products and therapeutic dietary food products". There is no common approach to the legal regulation of production and turnover of products for people with specific diseases in the world. The proposals for further harmonization of regulatory control in this area have been developed.

Template for success: using a resident-designed sign-out template in the handover of patient care.

Science.gov (United States)

Clark, Clancy J; Sindell, Sarah L; Koehler, Richard P

2011-01-01

Report our implementation of a standardized handover process in a general surgery residency program. The standardized handover process, sign-out template, method of implementation, and continuous quality improvement process were designed by general surgery residents with support of faculty and senior hospital administration using standard work principles and business models of the Virginia Mason Production System and the Toyota Production System. Nonprofit, tertiary referral teaching hospital. General surgery residents, residency faculty, patient care providers, and hospital administration. After instruction in quality improvement initiatives, a team of general surgery residents designed a sign-out process using an electronic template and standard procedures. The initial implementation phase resulted in 73% compliance. Using resident-driven continuous quality improvement processes, real-time feedback enabled residents to modify and improve this process, eventually attaining 100% compliance and acceptance by residents. The creation of a standardized template and protocol for patient handovers might eliminate communication failures. Encouraging residents to participate in this process can establish the groundwork for successful implementation of a standardized handover process. Integrating a continuous quality-improvement process into such an initiative can promote active participation of busy general surgery residents and lead to successful implementation of standard procedures. Copyright © 2011 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Product derivation in software product families : a case study

NARCIS (Netherlands)

Deelstra, S; Sinnema, M; Bosch, J

2005-01-01

From our experience with several organizations that employ software product families, we have learned that, contrary to popular belief, deriving individual products from shared software assets is a time-consuming and expensive activity. In this paper we therefore present a study that investigated

Supporting product-servicing networks

NARCIS (Netherlands)

Camarihna-Matos, L.M.; Ferrada, F.; Oliveira, A.I.; Afsarmanesh, H.; Aboutajdine, D.; Skalli, A.; Benchekroun, B.; Artiba, A.

2013-01-01

Service-based enhancement of products represents a growing trend, particularly in the context of complex products. A service-enhanced product can be seen as a market proposition that extends the traditional functionality of a product by incorporating additional business services, which not only

Intelligent products : A survey

NARCIS (Netherlands)

Meyer, G.G.; Främling, K.; Holmström, J.

This paper presents an overview of the field of Intelligent Products. As Intelligent Products have many facets, this paper is mainly focused on the concept behind Intelligent Products, the technical foundations, and the achievable practical goals of Intelligent Products. A novel classification of

Making Product Customization Profitable

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

2010-01-01

The main result presented in this paper is the Framework for Product Family Master Plan. This framework supports the identification of a product architecture for companies that customize products and services. The framework has five coherent aspects, the market, product assortment, supply...

Product Knowledge Modelling and Management

DEFF Research Database (Denmark)

Zhang, Y.; MacCallum, K. J.; Duffy, Alex

1996-01-01

function-oriented design. Both Specific Product Knowledge and Product Domain Knowledge are modelled at two levels, a meta-model and an information-level.Following that, a computer-based scheme to manage the proposed product lknowledge models within a dynamically changing environment is presented.......The term, Product Knowledge is used to refer to two related but distinct concepts; the knowledge of a specific product (Specific Product Knowledge) and the knowledge of a product domain (Product Domain Knowledge). Modelling and managing Product Knowlege is an essential part of carrying out design.......A scheme is presented in this paper to model, i.e. classify, structure and formalise the product knowledge for the purpose of supporting function-oriented design. The product design specification and four types of required attributes of a specific product have been identified to form the Specific Product...

Commercial production of metal hafnium and hafnium-based products

International Nuclear Information System (INIS)

Negodin, D.A.; Shtutsa, M.G.; Akhtonov, S.G.; Il'enko, E.V.; Kobyzev, A.M.

2012-01-01

Hafnium possesses a unique complex of physical and chemical properties which allow the application of products on its basis in various industries. Joint Stock Company 'Chepetsky Mechanical Plant' is the single enterprise which produces hafnium on the territory of Russia. The manufacture of metal hafnium with the total content of zirconium and hafnium, at least, 99,8 % of weights is developed at the present time at Joint Stock Company CHMZ. The weight of melted hafnium ingots is up to 1 ton. Manufacture of wide range of products from hafnium is implemented. The plates from a hafnium with thickness of 0.60 mm which are used for emergency control cartridges of VVER-440 reactors are the most critical product. It is shown that ingots and products obtained from metal hafnium correspond to the Russian and international standards for reactor materials in chemical composition, mechanical and corrosion properties.

Evidence supporting product standards for carcinogens in smokeless tobacco products.

Science.gov (United States)

Hatsukami, Dorothy K; Stepanov, Irina; Severson, Herb; Jensen, Joni A; Lindgren, Bruce R; Horn, Kimberly; Khariwala, Samir S; Martin, Julia; Carmella, Steven G; Murphy, Sharon E; Hecht, Stephen S

2015-01-01

Smokeless tobacco products sold in the United States vary significantly in yields of nicotine and tobacco-specific nitrosamines (TSNA). With the passage of the Family Smoking Prevention and Tobacco Control Act, the Food and Drug Administration now has the authority to establish product standards. However, limited data exist determining the relative roles of pattern of smokeless tobacco use versus constituent levels in the smokeless tobacco product in exposure of users to carcinogens. In this study, smokeless tobacco users of brands varying in nicotine and TSNA content were recruited from three different regions in the U.S. Participants underwent two assessment sessions. During these sessions, demographic and smokeless tobacco use history information along with urine samples to assess biomarkers of exposure and effect were collected. During the time between data collection, smokeless tobacco users recorded the amount and duration of smokeless tobacco use on a daily basis using their diary cards. Results showed that independent of pattern of smokeless tobacco use and nicotine yields, levels of TSNA in smokeless tobacco products played a significant role in carcinogen exposure levels. Product standards for reducing levels of TSNA in smokeless tobacco products are necessary to decrease exposure to these toxicants and potentially to reduce risk for cancer. ©2014 American Association for Cancer Research.

Side-stream products of edible oil refining as feedstocks in biodiesel production

Directory of Open Access Journals (Sweden)

Cvetković Bojan S.

2016-01-01

Full Text Available Biodiesel, a diesel fuel alternative, is produced from vegetable oils and animal fats by the transesterification reaction of triacylglycerols and lower aliphatic alcohols. Beside number advantages related to fossil fuels, the main barrier to biodiesel wider commercial use is the high price of edible oils. Recently, the special attention was given to side-stream products of edible oil refining as low-cost triacylglycerol sources for biodiesel production because of their positive economic and ecological effects. In this paper, the different procedures for biodiesel production from side-stream refining products such as soapstock, spent bleaching earth and deodorizer distillate were analyzed. The main goal of this paper is to analyze the possibilities for reusing the by-products of edible oil refinement in the biodiesel production.

Multiple tobacco product use among adults in the United States: cigarettes, cigars, electronic cigarettes, hookah, smokeless tobacco, and snus.

Science.gov (United States)

Lee, Youn O; Hebert, Christine J; Nonnemaker, James M; Kim, Annice E

2014-05-01

Noncigarette tobacco products are increasingly popular. Researchers need to understand multiple tobacco product use to assess the effects of these products on population health. We estimate national prevalence and examine risk factors for multiple product use. We calculated prevalence estimates of current use patterns involving cigarettes, cigars, electronic cigarettes, hookah, smokeless tobacco, and snus using data from the 2012 RTI National Adult Tobacco Survey (N=3627), a random-digit-dial telephone survey of adults aged 18 and over. Associations between use patterns (exclusive single product and multiple products) and demographic characteristics were examined using Pearson chi-square tests and logistic regression. 32.1% of adults currently use 1 or more tobacco products; 14.9% use cigarettes exclusively, and 6.6% use one noncigarette product exclusively, 6.9% use cigarettes with another product (dual use), 1.3% use two noncigarette products, and 2.4% use three or more products (polytobacco use). Smokers who are young adult, male, never married, reside in the West, and made prior quit attempts were at risk for multiple product use. Over 10% of U.S. adults use multiple tobacco products. A better understanding of multiple product use involving combustible products, like cigars and hookah, is needed. Multiple product use may be associated with past quit attempts. Copyright © 2014 Elsevier Inc. All rights reserved.

Orthopedic resident work-shift analysis: are we making the best use of resident work hours?

Science.gov (United States)

Hamid, Kamran S; Nwachukwu, Benedict U; Hsu, Eugene; Edgerton, Colston A; Hobson, David R; Lang, Jason E

2014-01-01

Surgery programs have been tasked to meet rising demands in patient surgical care while simultaneously providing adequate resident training in the midst of increasing resident work-hour restrictions. The purpose of this study was to quantify orthopedic surgery resident workflow and identify areas needing improved resident efficiency. We hypothesize that residents spend a disproportionate amount of time involved in activities that do not relate directly to patient care or maximize resident education. We observed 4 orthopedic surgery residents on the orthopedic consult service at a major tertiary care center for 72 consecutive hours (6 consecutive shifts). We collected minute-by-minute data using predefined work-task criteria: direct new patient contact, direct existing patient contact, communications with other providers, documentation/administrative time, transit time, and basic human needs. A seventh category comprised remaining less-productive work was termed as standby. In a 720-minute shift, residents spent on an average: 191 minutes (26.5%) performing documentation/administrative duties, 167.0 minutes (23.2%) in direct contact with new patient consults, 129.6 minutes (17.1%) in communication with other providers regarding patients, 116.2 (16.1%) minutes in standby, 63.7 minutes (8.8%) in transit, 32.6 minutes (4.5%) with existing patients, and 20 minutes (2.7%) attending to basic human needs. Residents performed an additional 130 minutes of administrative work off duty. Secondary analysis revealed residents were more likely to perform administrative work rather than directly interact with existing patients (p = 0.006) or attend to basic human needs (p = 0.003). Orthopedic surgery residents spend a large proportion of their time performing documentation/administrative-type work and their workday can be operationally optimized to minimize nonvalue-adding tasks. Formal workflow analysis may aid program directors in systematic process improvements to better align

The Potential of Animal By-Products in Food Systems: Production, Prospects and Challenges

Directory of Open Access Journals (Sweden)

Babatunde O. Alao

2017-06-01

Full Text Available The consumption of animal by-products has continued to witness tremendous growth over the last decade. This is due to its potential to combat protein malnutrition and food insecurity in many countries. Shortly after slaughter, animal by-products are separated into edible or inedible parts. The edible part accounts for 55% of the production while the remaining part is regarded as inedible by-products (IEBPs. These IEBPs can be re-processed into sustainable products for agricultural and industrial uses. The efficient utilization of animal by-products can alleviate the prevailing cost and scarcity of feed materials, which have high competition between animals and humans. This will also aid in reducing environmental pollution in the society. In this regard, proper utilization of animal by-products such as rumen digesta can result in cheaper feed, reduction in competition and lower cost of production. Over the years, the utilization of animal by-products such as rumen digesta as feed in livestock feed has been successfully carried out without any adverse effect on the animals. However, there are emerging gaps that need to be further addressed regarding the food security and sustainability of the products. Therefore, the objective of this review highlights the efficacy and effectiveness of using animal by-products as alternative sources of feed ingredients, and the constraints associated with their production to boost livestock performance in the industry at large.

Product Seeding: Word-of-Mouth Effects For and Beyond the Focal Product

Directory of Open Access Journals (Sweden)

Bart Yakov

2017-11-01

Full Text Available In a classic seeded WOM marketing campaign, a company sends product samples to a selected group of influencers, and encourages them share the product information and their own opinions with other consumers. Positive effects include more WOM for the focal product in the target segment, but also in additional segments. But there are additional spillover effects on the brand and the product category level and they are negative. More conversations about the focal product reduced the “off-topic” conversations about other brands in the same category as well as other products of the same brand. These negative brand and category spillover effects are stronger when the focal product is of a more functional nature. Marketers tend to consider only positive spillovers to be beneficial for a company, but negative spillovers should not be immediately classified as “bad news.” There are upsides to this effect that managers can use in their favor.

Influence of dispatching rules on average production lead time for multi-stage production systems.

Science.gov (United States)

Hübl, Alexander; Jodlbauer, Herbert; Altendorfer, Klaus

2013-08-01

In this paper the influence of different dispatching rules on the average production lead time is investigated. Two theorems based on covariance between processing time and production lead time are formulated and proved theoretically. Theorem 1 links the average production lead time to the "processing time weighted production lead time" for the multi-stage production systems analytically. The influence of different dispatching rules on average lead time, which is well known from simulation and empirical studies, can be proved theoretically in Theorem 2 for a single stage production system. A simulation study is conducted to gain more insight into the influence of dispatching rules on average production lead time in a multi-stage production system. We find that the "processing time weighted average production lead time" for a multi-stage production system is not invariant of the applied dispatching rule and can be used as a dispatching rule independent indicator for single-stage production systems.

Confronting product life thinking with product life cycle analysis

DEFF Research Database (Denmark)

McAloone, Tim C.

2001-01-01

to "read" the environment out of the product, in order to systematically, quickly and efficiently come to some design recommendations for the company. The phrases "LCA" and "product life thinking" will be described and differentiated and a pattern identified for their cooperative effect in use....

Software product quality measurement

OpenAIRE

Godliauskas, Eimantas

2016-01-01

This paper analyses Ruby product quality measures, suggesting three new measures for Ruby product quality measurement tool Rubocop to measure Ruby product quality characteristics defined in ISO 2502n standard series. This paper consists of four main chapters. The first chapter gives a brief view of software product quality and software product quality measurement. The second chapter analyses object oriented quality measures. The third chapter gives a brief view of the most popular Ruby qualit...

Play as production – production as game?

DEFF Research Database (Denmark)

Eichberg, Henning

2015-01-01

Play-related products and their export have through recent decades contributed to a certain Danish image on the world level – with Lego bricks at the commercial end and adventure playgrounds at the pedagogical end. The phenomena of toy production and play exports challenge our understanding of what...... “play” and “game” are, and of their social as well as political significance. At the municipal level, the city of Odense – “city of Hans Christian Andersen” – is branding itself as “city of play”. On the international level, Danish play-related products have expanded on the world market. In the field...... of sport, Danish sport is not just elite sport, but also organized in local associations. People meet in mass summer festivals of popular sport. Folk Academies develop sport as personal development, often in an experimental way. Street sports, parkour, play and games are promoted. Civil society is a basis...

Animal Production Research Advances

African Journals Online (AJOL)

Animal Production Research Advances is a peer-review journal established expressly to promote the production of all animal species utilized as food. The journal has an international scope and is intended for professionals in animal production and related sciences. We solicit contributions from animal production and ...

Accounting for productivity

DEFF Research Database (Denmark)

Aiyar, Shekhar; Dalgaard, Carl-Johan Lars

2009-01-01

The development accounting literature almost always assumes a Cobb-Douglas (CD) production function. However, if in reality the elasticity of substitution between capital and labor deviates substantially from 1, the assumption is invalid, potentially casting doubt on the commonly held view...... that factors of production are relatively unimportant in accounting for differences in labor productivity. We use international data on relative factor shares and capital-output ratios to formulate a number of tests for the validity of the CD assumption. We find that the CD specification performs reasonably...... well for the purposes of cross-country productivity accounting....

Measuring Clinical Productivity.

Science.gov (United States)

Hudson, Mark E; Lebovitz, Evan E

2018-06-01

Productivity measurements have been used to evaluate and compare physicians and physician practices. Anesthesiology is unique in that factors outside anesthesiologist control impact opportunity for revenue generation and make comparisons between providers and facilities challenging. This article uses data from the multicenter University of Pittsburgh Physicians Department of Anesthesiology to demonstrate factors influencing productivity opportunity by surgical facility, between department divisions and subspecialties within multispecialty divisions, and by individuals within divisions. The complexities of benchmarking anesthesiology productivity are demonstrated, and the potential value of creating a productivity profile for facilities and groups is illustrated. Copyright © 2018 Elsevier Inc. All rights reserved.

Smokeless tobacco products harbor diverse bacterial microbiota that differ across products and brands.

Science.gov (United States)

Smyth, Eoghan M; Kulkarni, Prachi; Claye, Emma; Stanfill, Stephen; Tyx, Robert; Maddox, Cynthia; Mongodin, Emmanuel F; Sapkota, Amy R

2017-07-01

Smokeless tobacco products contain numerous chemical compounds, including known human carcinogens. Other smokeless tobacco constituents, including bacteria, may also contribute to adverse health effects among smokeless tobacco users. However, there is a lack of data regarding the microbial constituents of smokeless tobacco. Our goal was to characterize the bacterial microbiota of different smokeless tobacco products and evaluate differences across product types and brands. DNA was extracted from 15 brands of smokeless tobacco products (including dry snuff, moist snuff, snus, and Swedish snus) and 6 handmade products (e.g., toombak) using an enzymatic and mechanical lysis approach. Bacterial community profiling was performed using PCR amplification of the V1-V2 hypervariable region of the 16S rRNA gene, followed by 454 pyrosequencing of the resulting amplicons and sequence analysis using the QIIME package. Total viable counts were also determined to estimate the number of viable bacteria present in each product. Average total viable counts ranged from 0 to 9.35 × 10 7  CFU g -1 . Analysis of the 16S rRNA gene sequences revealed high bacterial diversity across the majority of products tested: dry snuff products where characterized by the highest diversity indices compared to other products. The most dominant bacterial phyla across all products were Firmicutes, Proteobacteria, Actinobacteria, and Bacteroidetes. Significant differences in both bacterial community composition and in silico predicted gene content were observed between smokeless tobacco product types and between brands of specific smokeless tobacco products. These data are useful in order to comprehensively address potential health risks associated with the use of smokeless tobacco products.

Perfusion seed cultures improve biopharmaceutical fed-batch production capacity and product quality.

Science.gov (United States)

Yang, William C; Lu, Jiuyi; Kwiatkowski, Chris; Yuan, Hang; Kshirsagar, Rashmi; Ryll, Thomas; Huang, Yao-Ming

2014-01-01

Volumetric productivity and product quality are two key performance indicators for any biopharmaceutical cell culture process. In this work, we showed proof-of-concept for improving both through the use of alternating tangential flow perfusion seed cultures coupled with high-seed fed-batch production cultures. First, we optimized the perfusion N-1 stage, the seed train bioreactor stage immediately prior to the production bioreactor stage, to minimize the consumption of perfusion media for one CHO cell line and then successfully applied the optimized perfusion process to a different CHO cell line. Exponential growth was observed throughout the N-1 duration, reaching >40 × 10(6) vc/mL at the end of the perfusion N-1 stage. The cultures were subsequently split into high-seed (10 × 10(6) vc/mL) fed-batch production cultures. This strategy significantly shortened the culture duration. The high-seed fed-batch production processes for cell lines A and B reached 5 g/L titer in 12 days, while their respective low-seed processes reached the same titer in 17 days. The shortened production culture duration potentially generates a 30% increase in manufacturing capacity while yielding comparable product quality. When perfusion N-1 and high-seed fed-batch production were applied to cell line C, higher levels of the active protein were obtained, compared to the low-seed process. This, combined with correspondingly lower levels of the inactive species, can enhance the overall process yield for the active species. Using three different CHO cell lines, we showed that perfusion seed cultures can optimize capacity utilization and improve process efficiency by increasing volumetric productivity while maintaining or improving product quality. © 2014 American Institute of Chemical Engineers.

Impact of product configuration systems on product profitability and costing accuracy

DEFF Research Database (Denmark)

Myrodia, Anna; Kristjansdottir, Katrin; Hvam, Lars

2017-01-01

in control of their product assortment, making the right decisions in the sales phase and increasing sales of optimal products. These benefits should have an impact on the company's ability to make more accurate cost estimations in the sales phase, which can positively affect the products’ profitability......This article aims at analyzing the impact of implementing a product configuration system (PCS) on the increased accuracy of the cost calculations and the increased profitability of the products. Companies that have implemented PCSs have achieved substantial benefits in terms of being more...... and after a PCS was implemented. The comparison in the case study revealed that increased accuracy of the cost calculations in the sales phase and consequently increased profitability can be achieved by implementing a PCS....

Device to irradiate agricultural product on the production site, after harvesting

International Nuclear Information System (INIS)

Jegu, Jean; Palomo, Georges; Blaive, Daniel.

1982-01-01

The invention concerns a device to irradiate agricultural product on the production site, after harvesting. It includes an outer shielding to absorb the radiations and containers in which the products are placed for irradiation. The shielding is rotationally symmetrical around a vertical axis and holds an irradiation chamber containing a radioactive bar fitted along the shielding axis. The cylindrical containers are placed around the chamber with their axes parallel to the axis of the shielding. They are set in rotation by a motor and receive the farm products through their top ends which communicate with a supply system. Their bottom ends are closed by shutters covering a means for evacuating the products. The invention applies in particular to the irradiation of newly dug potatoes to avoid germination [fr

Modelling of virtual production networks

Directory of Open Access Journals (Sweden)

2011-03-01

Full Text Available Nowadays many companies, especially small and medium-sized enterprises (SMEs, specialize in a limited field of production. It requires forming virtual production networks of cooperating enterprises to manufacture better, faster and cheaper. Apart from that, some production orders cannot be realized, because there is not a company of sufficient production potential. In this case the virtual production networks of cooperating companies can realize these production orders. These networks have larger production capacity and many different resources. Therefore it can realize many more production orders together than each of them separately. Such organization allows for executing high quality product. The maintenance costs of production capacity and used resources are not so high. In this paper a methodology of rapid prototyping of virtual production networks is proposed. It allows to execute production orders on time considered existing logistic constraints.

Antiproton production

International Nuclear Information System (INIS)

Allaby, J.V.

1984-01-01

The basic definitions used in the physics literature on particle production are reviewed. The data on anti p production are interpreted in order to provide an estimate of the yield of anti p's from typical target at the antiproton accumulator, including the effects of re-absorption in the target. (orig.)

Chlorhexidine in cosmetic products

DEFF Research Database (Denmark)

Opstrup, Morten Schjørring; Johansen, Jeanne Duus; Bossi, Rossana

2015-01-01

or an antimicrobial agent in cosmetic products at a concentration up to 0.3%, as set by the European Cosmetics Directive (now Regulations). OBJECTIVES: To identify cosmetic product types containing chlorhexidine, and to measure the concentration of chlorhexidine in selected products. METHODS: Between February 2013...... and April 2013, we checked for chlorhexidine in cosmetic products in 14 supermarkets, one hairdressing salon and one beauty and retail store in Copenhagen, Denmark by reading the ingredient labels. The chlorhexidine concentration was measured in 10 selected products by high-performance liquid chromatography...... concentrations were 0.01-0.15%. CONCLUSIONS: We found chlorhexidine in various cosmetic product types, predominantly aimed at females, and in hair products. The measured chlorhexidine concentrations were all within the permitted limit. The relevance for allergic sensitization should be further explored....

Impact of product platforms on lean production systems : evidence from industrial machinery manufacturing

NARCIS (Netherlands)

Alblas, A.A.; Wortmann, J.C.

2012-01-01

The present study describes the effects of product platform changes on lean production systems. Current research into product platforms focuses mostly on the development stage. However, although the initial development of platforms is an important issue, product platforms often evolve during later

Alignment of Product Models and Product State Models - Integration of the Product Lifecycle Phases

DEFF Research Database (Denmark)

Larsen, Michael Holm; Kirkby, Lars Phillip; Vesterager, Johan

1999-01-01

The purpose of this paper is to discuss the integration of the Product Model (PM) and the Product State Model (PCM). Focus is on information exchange from the PSM to the PM within the manufacturing of a single ship. The paper distinguishes between information and knowledge integration. The paper ...... provides some overall strategies for integrating PM and PSM. The context of this discussion is a development project at Odense Steel Shipyard....

From Sentence Production to Text Production: Investigating Fundamental Processes.

Science.gov (United States)

Fayol, Michel

1991-01-01

Presents a review of cognitive psychology research dealing with the organization and functioning of oral and written language production mechanisms. Discusses works dealing with the microstructural aspects of language, primarily oral production. Describes how the research perspective has evolved from modular to connectionist models. Examines the…

Production and Productivity Effects of Informal Contract Farming in ...

African Journals Online (AJOL)

This paper uses data from a 2001 household survey of small-scale farming households in Kirinyaga District, Kenya to explore production effects of informal credit contracts in French bean farming where formal markets for surplus production are seemingly shallow and imperfect. Specifically, it examines whether informal ...

Product sounds : Fundamentals and application

NARCIS (Netherlands)

Ozcan-Vieira, E.

2008-01-01

Products are ubiquitous, so are the sounds emitted by products. Product sounds influence our reasoning, emotional state, purchase decisions, preference, and expectations regarding the product and the product's performance. Thus, auditory experience elicited by product sounds may not be just about

75 FR 33814 - Tobacco Product Constituents Subcommittee of the Tobacco Products Scientific Advisory Committee...

Science.gov (United States)

2010-06-15

...] Tobacco Product Constituents Subcommittee of the Tobacco Products Scientific Advisory Committee; Notice of... to the public. Name of Committee: Tobacco Product Constituents Subcommittee of the Tobacco Products...-8900. Contact Person: Karen Templeton-Somers, Office of Science, Center for Tobacco Products, Food and...

K-shell-hole production, multiple-hole production, charge transfer, and antisymmetry

International Nuclear Information System (INIS)

Reading, J.F.; Ford, A.L.

1980-01-01

In calculating K-shell-hole production when an ion collides with an atom, account must be taken of the fact that processes involving electrons other than the K-shell electron can occur. For example, after making a K-shell hole an L-shell electron may be knocked into it, or an L-shell vacancy may be produced and the K-shell electron promoted to that vacancy in the ''Fermi sea'' of the target-atom orbitals. In 1973 a theorem was proved by one of the present authors demonstrating that all these multielectron processes cancel in an independent-particle model for the target atom. In this paper it is shown that the same thing occurs for hole production by charge transfer to the ion. The authors demonstrate that multihole production does not obey this simple rule and that the probability for multihole production is not the product of independent single-electron probabilities. The correct expressions that should be used for these processes are given, together with new results for charge-transfer processes accompanied by hole production

Determination of impurities and degradation products from veterinary medicinal products by HPLC method

Directory of Open Access Journals (Sweden)

Elena Gabriela Oltean

2014-06-01

Full Text Available The organic or inorganic impurities in the veterinary medicinal product can derive from starting materials, manufacturing process, incomplete purification, inappropriate storage. The acceptable levels of impurities in pharmaceuticals are estimated by comparison with standard solutions, according to the appropriate monographs. Forced degradation studies determine the stability of the method of dosage for the active compounds and for the entire finished product under excessive accelerated degradation conditions. They also provide information on degradation pathways and selectivity of analytical methods applied. The information provided by the degradation studies on the active compound and finished pharmaceutical product should demonstrate the specificity of the analytical method regarding impurities. Forced degradation studies should demonstrate that the impurities and degradation products generated do not interfere with the active compound. The current forced degradation methods consist of acid hydrolysis, basic hydrolysis, oxidation, exposure of the medicinal product to temperature and light. HPLC methods are an integral analytical instrument for the analysis of the medicinal product. The HPLC method should be able to separate, detect and quantify various specific degradation products that can appear after manufacture or storage of the medicinal product, as well as new elements appearing after synthesis. FDA and ICH guidelines recommend the enclosure of the results, including the chromatograms specific to the forced degradation-subjected medicinal product, in the documentation for marketing authorization. Using HPLC methods in forced degradation studies on medicinal products provides relevant information on the method of determination for the formulation of the medicinal product, synthesis product, packaging methods and storage.

90Y production of high purity by electrochemical separation

International Nuclear Information System (INIS)

Alberti Ramírez, Alejandro; Serra Águila, Rolando; Morín Zorrilla, José Antonio; Pino Peraza, Madián; Soler Iglesias, Joel; Cruz Morales, Amed

2016-01-01

In this paper 90 Y is obtained without added carrier, by electrolytic separation from a solution in secular equilibrium Sr-Y and further purification in three cycles electrolytic automated, at constant current. The process productivity was 60-80 mCi (2220-2960 MBq). The long half-life of 90 Sr to be used by virtually indefinitely ensuring the stability of the raw material for generator operation, which helps sustainability and production stability. In 18 productions to date could be found to both content of 90 Sr equal to 0.110 ± 0.004 (k = 2) kBq / g by various methods, for their ability combination with DTPA, bifunctional chelate appropriate range of concentrations and even in the presence of trace metals, resulting in excellent characteristics for use as precursor in the preparation of therapeutic radiopharmaceuticals including radioimmunotherapy. The latter being a pure beta emitter with physical half-life, comparable to the time of capture and residence of many antibodies in tumors. The influence of Fe (III) was studied by the method of addition and concluded that only affects the performance of DTPA 90 Y marking if their presence is above a concentration of 0.018 mol / L. We show that the presence of other metals such as Pb (II), Zn (II) and Cu (II) also affects performance complexation

Artisanal salt production in Aveiro/Portugal - an ecofriendly process.

Science.gov (United States)

Rodrigues, Carolina M; Bio, Ana; Amat, Francisco; Vieira, Natividade

2011-11-04

Solar salinas are man-made systems exploited for the extraction of salt, by solar and wind evaporation of seawater. Salt production achieved by traditional methods is associated with landscapes and environmental and patrimonial values generated throughout history. Since the mid-twentieth century, this activity has been facing a marked decline in Portugal, with most salinas either abandoned or subjected to destruction, making it necessary to find a strategy to reverse this trend.It is, however, possible to generate revenue from salinas at several levels, not merely in terms of good quality salt production, but also by obtaining other products that can be commercialized, or by exploring their potential for tourism, and as research facilities, among others. Furthermore, with an adequate management, biodiversity can be restored to abandoned salinas, which constitute important feeding and breeding grounds for resident and migratory aquatic birds, many of which are protected by European Community Directives.The aims of this manuscript are to present a brief overview on the current state of sea salt exploitation in Portugal and to stress the importance of recovering these salinas for the conservation of this particular environment, for the regional economy, the scientific community and the general public. The Aveiro salina complex is presented in detail, to exemplify salina structure and functioning, as well as current problems and potential solutions for artisanal salinas.

Redesigning journal club in residency

Directory of Open Access Journals (Sweden)

Al Achkar M

2016-05-01

Full Text Available Morhaf Al Achkar Department of Family Medicine, Indiana University, Indianapolis, IN, USA Abstract: The gap between production and implementation of knowledge is the main reason for the suboptimal quality of health care. To eliminate this gap and improve the quality of patient care, journal club (JC in graduate medical education provides an opportunity for learning the skills of evidence-based medicine. JC, however, continues to face many challenges mainly due to poorly defined goals, inadequate preparation, and lack of interest. This article presents an innovative model to prepare and present JC based on three pillars: dialogical learning through group discussion, mentored residents as peer teachers, and including JC as part of a structured curriculum to learn evidence-based medicine. This engaging model has the potential to transform JC from a moribund session that is daunting for residents into a lively discussion to redefine clinical practice using the most current evidence. Keywords: journal club, residents, peer teaching, evidence-based medicine, dialogical learning

Design, production and materials of PV powered consumer products - the case of mass production (cd-rom)

NARCIS (Netherlands)

Reinders, Angelina H.M.E.; Akkerman, Remko; Palz, W.; Ossenbrink, H.; Helm, P.

2005-01-01

Though many options exist, the application of integrated PV systems in mass produced consumer products is still unusual and rare [1]. Therefore, to date, design and manufacturing aspects of product-integrated PV systems have been explored only to a very limited extent. The requirements for the

Information Technology in Small Medium Enterprise: Logistic and Production Processes

Directory of Open Access Journals (Sweden)

Maurizio Pighin

2017-01-01

Full Text Available This paper presents and discuss a survey which describes how small-medium enterprises (SMEs implement and use their information system with respect to their logistic and production processes. The study first describes the rationale of the research, then it identifies the characteristics of the companies and detects their general attitude towards information technology (IT. In the following section the paper presents a set of detailed processes to verify the structure and workflow of companies and how IT supports their processes. In the last part we study the influence of some company characteristics to effective use of processes and to different technological approaches, to support defined logistic and production processes. The novelty of the study and its interest, both in academic and institutional context as in the real world, resides in the opportunity to verify and understand the different attitudes of SMEs towards information technology in defining, organizing, planning and control their processes.

Removal of radon decay products with ion generators - comparison of experimental results with theory

International Nuclear Information System (INIS)

Maher, E.F.; Rudnick, S.N.; Moeller, D.W.

1985-01-01

The potential of ion generators to remove radon decay products from the airspace of residences or mines was investigated both experimentally and theoretically. A positive ion generator, producing an air ion current of less than 2 μA and operated in a 78 m 3 chamber with air exchange rates ranging from 0.2 to 0.8-hr -1 and relative humidities ranging from 20 to nearly 100%, reduced the concentrations of airborne radon decay products by as much as 85%. A negative ion generator, operated under the same range of conditions, was less effective, producing airborne radon decay product removals up to 67%. Experimental results compared favorably with a simple theoretical model that hypothesizes a three-part process: 1) radon decay products, as well as aerosol particles to which some of these decay products attach, are charged by diffusion of the air ions produced by the generator; 2) the air ions also produce a nonuniform space charge in the chamber that results in an electric field gradient radially outwards from the generator to the chamber surfaces; and 3) because of the influence of this electric field, the charged decay products and particles migrate toward nearby surfaces where they plate out. The net benefit of unipolar space charging is a substantial decrease in the steady-state radon decay product concentrations in the airspace with a corresponding reduction in the lung dose equivalent to the occupants

Radioactive environmental impact assessment for a production project of titanium dioxide by chlorination process

International Nuclear Information System (INIS)

Qiu Guohua

2010-01-01

Based on the analysis of shifting direction of radionuclide in production process and the environmental investigation and monitoring, the radioactive environmental impact from a production project of titanium dioxide by chlorination process has been analyzed and assessed. The result of radioactive environmental investigation shows that values of assessment factors are in the range of environmental radioactive background. The radioactive environmental sensitive spot has been delineated. The results of radioactive environmental prediction show that the additional doses to workers and residents are 0.59 mSv/a and 9.28 × 10-4 mSv/a respectively which are less than the annual dose limits of administration. The radioactive environmental impact of the production project of the titanium dioxide by chlorination process will meet the needs of national regulations and standards if radiation protection and environmental protection measures are implemented and radioactive environmental monitoring are strengthened. (author)

The productivity and work load in flexible production systems

NARCIS (Netherlands)

Rhijn, J.W. van; Looze, M.P. de; Schoenmaker, N.; Bosch, T.; Deursen, J. van

2006-01-01

A negative aspect of serial flow production systems is its lack of flexibility. Other production systems like the flexing flow and the shopping system are more flexible as the number of workers can be easily adjusted to temporal demands. But how efficient are these flexible systems? In a laboratory

Interface between the production plan and the master production schedule in assembly environments

OpenAIRE

Moya Navarro, Marcos; Sánchez Brenes, Magaly

2012-01-01

In a production environment there is a direct relationship between the market and the manufacturing process of goods.When production is immersed in an assembly environment, the process of production planning and scheduling becomes complex, and the enterprises have the risk of losing competitive advantages in terms of not meeting delivery dates and production high costs. Linear programming has become an appropriate tool for production planning and scheduling in complex manufacturing environmen...

9 CFR 319.761 - Potted meat food product and deviled meat food product.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Potted meat food product and deviled meat food product. 319.761 Section 319.761 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY...

Multi-Product Crops for Agricultural and Energy Production : an AGE Analysis for Poland

NARCIS (Netherlands)

Ignaciuk, A.; Dellink, R.B.

2005-01-01

By-products from agriculture and forestry can contribute to production of clean and cheap (bio)electricity. To assess the role of such multi-product crops in the response to climate policies, we present an applied general equilibrium model with special attention to biomass and multi-product crops

Theoretical investigation of biomass productivities achievable in solar rectangular photobioreactors for the cyanobacterium Arthrospira platensis.

Science.gov (United States)

Pruvost, Jeremy; Cornet, J F; Goetz, Vincent; Legrand, Jack

2012-01-01

Modeling was done to simulate whole-year running of solar rectangular photobioreactors (PBRs). Introducing the concept of ideal reactor, the maximal biomass productivity that could be achieved on Earth on nitrate as N-source was calculated. Two additional factors were also analyzed with respect to dynamic calculations over the whole year: the effect of PBR location and the effects of given operating conditions on the resulting decrease in productivity compared with the ideal one. Simulations were conducted for the cyanobacterium Arthospira platensis, giving an ideal productivity (upper limit) in the range 55-60 tX ha(-1) year(-1) for a sun tracking system (and around 35-40 tX ha(-1) year(-1) for a fixed horizontal PBR). For an implantation in France (Nantes, west coast), the modification in irradiation conditions resulted in a decrease in biomass productivity of 40%. Various parameters were investigated, with special emphasis on the influence of the incident angle of solar illumination on resulting productivities, affecting both light capture and light transfer inside the bulk culture. It was also found that with appropriate optimization of the residence time as permitted by the model, productivities close to maximal could be achieved for a given location. Copyright © 2012 American Institute of Chemical Engineers (AIChE).

Feed Materials Production Center annual environmental report for calendar 1989

Energy Technology Data Exchange (ETDEWEB)

Dugan, T.A.; Gels, G.L.; Oberjohn, J.S.; Rogers, L.K.

1990-10-01

The mission of the Department of Energy's (DOE) Feed Materials Production Center (FMPC) has been to process uranium for United States' defense programs. On July 10, 1989, the FMPC suspended production operations, but remains on standby for certain segments of production. The FMPC also manages the storage of some radioactive and hazardous materials. As part of its operations, the FMPC continuously monitors the environment to determine that it is operating within federal and state standards and guidelines regarding emission of radioactive and nonradioactive materials. Data collected from the FMPC monitoring program are used to calculate estimates of radiation dose for residents due to FMPC operations. For 1989, the estimate of dose through the air pathway, excluding radon, indicated that people in the area were exposed to less than 6% of the DOE guideline established to protect the public from radiation exposure. When radon emissions are included, the dose from FMPC operations during 1989 was less than 22% of the annual background radiation dose in the Greater Cincinnati area. This report is a summary of FMPC's environmental activities and monitoring program for 1989. An Environmental Compliance Self-Assessment presents the FMPC's efforts to comply with environmental regulations through June 1990. 44 refs., 48 figs.

Seeds of Cross-Media Production

DEFF Research Database (Denmark)

Bødker, Susanne; Petersen, Anja Bechmann

2007-01-01

separately and of cross-media production. Since cross-media production is in the making, we study the instruments currently used for planning and coordination, and analyze them as seeds that will eventually make cross-media production happen. Time and timing are important in news production in general......We present an empirical study of an organization that has recently moved from traditional newspaper production towards cross-media production involving the integrated digital production of newspaper, television, radio and web-news. The paper focuses on the daily production rhythms of the media...... with planning and coordination. We demonstrate how the production rhythms of the individual media collide with that of cross-media, and how product lifecycle rhythms add to the list of causes of problems that may jeopardize crossmedia production. We propose to strengthen planning and overview support elements...

Volatile products controlling Titan's tholins production

KAUST Repository

Carrasco, Nathalie

2012-05-01

A quantitative agreement between nitrile relative abundances and Titan\\'s atmospheric composition was recently shown with a reactor simulating the global chemistry occurring in Titan\\'s atmosphere (Gautier et al. [2011]. Icarus, 213, 625-635). Here we present a complementary study on the same reactor using an in situ diagnostic of the gas phase composition. Various initial N 2/CH 4 gas mixtures (methane varying from 1% to 10%) are studied, with a monitoring of the methane consumption and of the stable gas neutrals by in situ mass spectrometry. Atomic hydrogen is also measured by optical emission spectroscopy. A positive correlation is found between atomic hydrogen abundance and the inhibition function for aerosol production. This confirms the suspected role of hydrogen as an inhibitor of heterogeneous organic growth processes, as found in Sciamma-O\\'Brien et al. (Sciamma-O\\'Brien et al. [2010]. Icarus, 209, 704-714). The study of the gas phase organic products is focussed on its evolution with the initial methane amount [CH 4] 0 and its comparison with the aerosol production efficiency. We identify a change in the stationary gas phase composition for intermediate methane amounts: below [CH 4] 0=5%, the gas phase composition is mainly dominated by nitrogen-containing species, whereas hydrocarbons are massively produced for [CH 4] 0>5%. This predominance of N-containing species at lower initial methane amount, compared with the maximum gas-to solid conversion observed in Sciamma-O\\'Brien et al. (2010) for identical methane amounts confirms the central role played by N-containing gas-phase compounds to produce tholins. Moreover, two protonated imines (methanimine CH 2NH and ethanamine CH 3CHNH) are detected in the ion composition in agreement with Titan\\'s INMS measurements, and reinforcing the suspected role of these chemical species on aerosol production. © 2012 Elsevier Inc.

Product Placement in Cartoons

Directory of Open Access Journals (Sweden)

Irena Oroz Štancl

2014-06-01

Full Text Available Product placement is a marketing approach for integrating products or services into selected media content. Studies have shown that the impact of advertising on children and youth are large, and that it can affect their preferences and attitudes. The aim of this article is to determine the existing level of product placement in cartoons that are broadcast on Croatian television stations. Content analysis of cartoons in a period of one month gave the following results: in 30% of cartoons product placement was found; most product placement were visual ads, in 89%, however, auditory product placement and plot connection was also found. Most ads were related to toys and it is significant that even 65% of cartoons are accompanied by a large amount of products available on the Croatian market. This is the result of two sales strategies: brand licensing (selling popular cartoon characters to toys, food or clothing companies and cartoon production based on existing line of toys with the sole aim of making their sales more effective.

Productivity and energy efficiency

Energy Technology Data Exchange (ETDEWEB)

Lovins, H. [Rocky Mountain Inst., Snowmass, CO (United States)

1995-12-31

Energy efficient building and office design offers the possibility of significantly increased worker productivity. By improving lighting, heating and cooling, workers can be made more comfortable and productive. An increase of 1 percent in productivity can provide savings to a company that exceed its entire energy bill. Efficient design practices are cost effective just from their energy savings. The resulting productivity gains make them indispensable. This paper documents eight cases in which efficient lighting, heating, and cooling have measurably increased worker productivity, decreased absenteeism, and/or improved the quality of work performed. They also show that efficient lighting can measurably increase work quality by removing errors and manufacturing defects. The case studies presented include retrofit of existing buildings and the design of new facilities, and cover a variety of commercial and industrial settings. Each case study identifies the design changes that were most responsible for increased productivity. As the eight case studies illustrate, energy efficient design may be one of the least expensive ways for a business to improve the productivity of its workers and the quality of its product. (author). 15 refs.

Opportunities, perspectives and limits in lactic acid production from waste and industrial by-products

Directory of Open Access Journals (Sweden)

Mladenović Dragana D.

2016-01-01

Full Text Available In line with the goals of sustainable development and environmental protection today great attention is directed towards new technologies for waste and industrial by-products utilization. Waste products represent potentially good raw material for production other valuable products, such as bioethanol, biogas, biodiesel, organic acids, enzymes, microbial biomass, etc. Since the first industrial production to the present, lactic acid has found wide application in food, cosmetic, pharmaceutical and chemical industries. In recent years, the demand for lactic acid has been increasing considerably owing to its potential use as a monomer for the production of poly-lactic acid (PLA polymers which are biodegradable and biocompatible with wide applications. Waste and industrial by-products such are whey, molasses, stillage, waste starch and lignocellulosic materials are a good source of fermentable sugars and many other substances of great importance for the growth of microorganisms, such as proteins, minerals and vitamins. Utilization of waste products for production of lactic acid could help to reduce the total cost of lactic acid production and except the economic viability of the process offers a solution of their disposal. Fermentation process depends on chemical and physical nature of feedstocks and the lactic acid producer. This review describes the characteristics, abilities and limits of microorganisms involved in lactic acid production, as well as the characteristics and types of waste products for lactic acid production. The fermentation methods that have been recently reported to improve lactic acid production are summarized and compared. In order to improve processes and productivity, fed-batch fermentation, fermentation with immobilized cell systems and mixed cultures and opportunities of open (non-sterilized fermentation have been investigated.

Sustainable production of wood and non-wood forest products

Science.gov (United States)

Ellen M. Donoghue; Gary L. Benson; James L. Chamberlain

2003-01-01

The International Union of Forest Research Organizations (IUFRO) All Divisions 5 Conference in Rotorua, New Zealand, March 11-15, 2003, focused on issues surrounding sustainable foest management and forest products research. As the conference title "Forest Products Research: Providing for Sustainable Choices" suggests, the purpose of the conference was to...

Evolving production network structures

DEFF Research Database (Denmark)

Grunow, Martin; Gunther, H.O.; Burdenik, H.

2007-01-01

When deciding about future production network configurations, the current structures have to be taken into account. Further, core issues such as the maturity of the products and the capacity requirements for test runs and ramp-ups must be incorporated. Our approach is based on optimization...... modelling and assigns products and capacity expansions to production sites under the above constraints. It also considers the production complexity at the individual sites and the flexibility of the network. Our implementation results for a large manufacturing network reveal substantial possible cost...

Possibilities of utilization of co-products from corn grain ethanol and starch production

Directory of Open Access Journals (Sweden)

Semenčenko Valentina V.

2013-01-01

Full Text Available In recent decades, the expansion of alternative fuels production from crops traditionally used for food and animal feed has led to significant changes in the field of energy production, agriculture and food industry. Starch and sugar feedstocks for ethanol production (corn, wheat, sugar beet, sugar cane, etc. require increasing arable land to meet market demands for the biofuel production. Although intensive studies are being carried out in order to identify improved and more cost-effective methods for the utilization of lignocellulosic and communal waste in the production of alcohol fuel, the possibility of using dry distillers’ grains with solubles (DDGS, by-product of bioethanol production from corn and wheat as well as alcoholic beverages industry, is now in focus. Application of DDGS in livestock and poultry diets in concentrations greater than traditional could positively affect the economic viability of this biofuel production, but also stabilize the current imbalance in the food and animal feed market. However, DDGS feedstuff should not be treated as a perfect substitute for corn because the complexity of ration formulation determined at the farm or feedlot level is driven by energy and protein and other nutrient requirements, as well as their relative costs in the ration. Nevertheless, processing of corn by wet milling provides a multitude of co-products suitable for feedstuffs, food industry, pharmaceuticals, chemistry etc. Some of the most important wet milling co-products that have their use in feedstuffs are corn gluten feed and corn gluten meal. The use of DDGS as a substitute for traditional feed could prevent indirect land-use changes associated with biofuel production, and therefore preserve the environmental destruction by saving the forests and permanent pastures. The use of distiller’s grains can be beneficial to biofuel growth as this is an additional, the second largest, source of income accounting of 10-20% total

25 CFR 309.6 - When does a commercial product become an Indian product?

Science.gov (United States)

2010-04-01

...? 309.6 Section 309.6 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.6 When does a commercial product become an Indian product? In addressing Indian embellishments to originally commercial products, the Indian labor expended to add art or...

Use of herbal medicinal products among children and adolescents in Germany

Science.gov (United States)

2014-01-01

Background Germany is a country with a high use of herbal medicinal products. Population-based data on the use of herbal medicinal products among children are lacking. The aim of this study is to investigate the prevalence, patterns and determinants of herbal medicine use among children and adolescents in Germany. Methods As data base served the German Health Interview and Examination Survey for Children and Adolescents (KiGGS), a representative population based survey conducted 2003–2006 by the Robert Koch Institute. 17,450 boys and girls aged 0–17 years provided information on drug use in the preceding seven days. Herbal medicinal products were defined according to the European and German drug laws. SPSS Complex Sample method was used to estimate prevalence rates and factors associated with herbal medicine use. Results The prevalence rate of herbal medicinal product use amounts to 5.8% (95% confidence interval 5.3-6.3%). Use of herbal medicine declines along with increasing age and shows no difference between boys and girls in younger age groups. Teenage girls are more likely to use herbal medicines than teenage boys. Two thirds of herbal medicines are used for the treatment of coughs and colds; nearly half of herbal medicines are prescribed by medical doctors. Determinants of herbal medicinal product use are younger age, residing in South Germany, having a poor health status, having no immigration background and coming from a higher social class family. Children’s and parents-related health behavior is not found to be associated with herbal medicine use after adjusting for social class. Conclusions Use of herbal medicinal products among children and adolescents between the ages of 0 and 17 years in Germany is widely spread and shows relatively higher rates compared to international data. This study provides a reference on the use of herbal medicinal products for policy-makers, health professionals and parents. Further studies are needed to investigate the

Fermentative production of isobutene.

Science.gov (United States)

van Leeuwen, Bianca N M; van der Wulp, Albertus M; Duijnstee, Isabelle; van Maris, Antonius J A; Straathof, Adrie J J

2012-02-01

Isobutene (2-methylpropene) is one of those chemicals for which bio-based production might replace the petrochemical production in the future. Currently, more than 10 million metric tons of isobutene are produced on a yearly basis. Even though bio-based production might also be achieved through chemocatalytic or thermochemical methods, this review focuses on fermentative routes from sugars. Although biological isobutene formation is known since the 1970s, extensive metabolic engineering is required to achieve economically viable yields and productivities. Two recent metabolic engineering developments may enable anaerobic production close to the theoretical stoichiometry of 1isobutene + 2CO(2) + 2H(2)O per mol of glucose. One relies on the conversion of 3-hydroxyisovalerate to isobutene as a side activity of mevalonate diphosphate decarboxylase and the other on isobutanol dehydration as a side activity of engineered oleate hydratase. The latter resembles the fermentative production of isobutanol followed by isobutanol recovery and chemocatalytic dehydration. The advantage of a completely biological route is that not isobutanol, but instead gaseous isobutene is recovered from the fermenter together with CO(2). The low aqueous solubility of isobutene might also minimize product toxicity to the microorganisms. Although developments are at their infancy, the potential of a large scale fermentative isobutene production process is assessed. The production costs estimate is 0.9 Euro kg(-1), which is reasonably competitive. About 70% of the production costs will be due to the costs of lignocellulose hydrolysate, which seems to be a preferred feedstock.

Product Configuration Systems and Productivity

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard; Edwards, Kasper

2004-01-01

Twelve companies have been interviewed with the purpose to get information about technical, economic and organisational matters in respect of Product Configuration Systems (PCS).Combinations of qualitative interviews and quantitative scoring have been used in ranking expected and realized results...

Product prioritization in a two-stage food production system with intermediate storage

NARCIS (Netherlands)

Akkerman, R.; van Donk, D.P.

In the food-processing industry, usually a limited number of storage tanks for intermediate storage is available, which are used for different products. The market sometimes requires extremely short lead times for some products, leading to prioritization of these products, partly through the

Modernity Evaluation of the Machines Used During Production Process of Metal Products

OpenAIRE

Ingaldi, Manuela; Dziuba, Szymon T.

2015-01-01

Most manufacturing companies realize its technologies, implemented through concrete machinery parts. They differ in terms of importance, the relevance of their selection and the level of their modernity. Modernity and efficiency of the machine are also very important during production process of the metal products. They have an influence on the quality of these products. The purpose of this article is to analyse the chosen production machine (CNC machine AFE-3D8-T) used during pro...

Product Structuring, an overview

DEFF Research Database (Denmark)

Tichem, Marcel; Storm, Ton; Andreasen, Mogens Myrup

1997-01-01

.In the paper, the field of product structuring is defined and broken down into topics. For each of the topics, results of research are presented. Issues for further research are identified. The references in the paper refer to papers in the proceedings of the workshops.......This paper presents the highlights of two WDK Workshops on Product Structuring. Product structuring plays an important role in creating products which have good functional and life-cycle related properties, in design process management, and in several other company functions like production control...

The impact of new product introduction on plant productivity in the North American automotive industry

NARCIS (Netherlands)

Gopal, A.; Goyal, M.; Netessine, S.; Reindorp, M.J.

2013-01-01

Product launch—an event when a new product debuts for production in a plant—is an important phase in product development. But launches disrupt manufacturing operations, resulting in productivity losses. Using data from North American automotive plants from years 1999–2007, we estimate that a product

Technical efficiency in milk production in underdeveloped production environment of India*.

Science.gov (United States)

Bardhan, Dwaipayan; Sharma, Murari Lal

2013-12-01

The study was undertaken in Kumaon division of Uttarakhand state of India with the objective of estimating technical efficiency in milk production across different herd-size category households and factors influencing it. Total of 60 farm households having representation from different herd-size categories drawn from six randomly selected villages of plain and hilly regions of the division constituted the ultimate sampling units of the study. Stochastic frontier production function analysis was used to estimate the technical efficiency in milk production. Multivariate regression equations were fitted taking technical efficiency index as the regressand to identify the factors significantly influencing technical efficiency in milk production. The study revealed that variation in output across farms in the study area was due to difference in their technical efficiency levels. However, it was interesting to note that smallholder producers were more technically efficient in milk production than their larger counterparts, especially in the plains. Apart from herd size, intensity of market participation had significant and positive impact on technical efficiency in the plains. This provides definite indication that increasing the level of commercialization of dairy farms would have beneficial impact on their production efficiency.

Heuristics for the Economic Production Quantity Problem under Restrictions on Production and Maintenance Time

Directory of Open Access Journals (Sweden)

Qi Xu

2016-01-01

Full Text Available This paper proposes an economic production quantity problem with the maximal production run time and minimal preventive maintenance time over a finite planning horizon. The objective is to find the efficient production and maintenance policy to minimize the total cost composed of production, maintenance, shortages, and holding costs under the restriction on the production run time and the preventive maintenance time. The production and maintenance decisions include the production and maintenance frequencies and the production run and the maintenance time. The variability and the boundedness of the production run and maintenance time make the problem difficult to solve. Two heuristic algorithms are developed using different techniques based on the optimal properties of the relaxed problem. The performance comparison between the two algorithms is illustrated by numerical examples. The numerical results show that, for the most part, there exists a heuristic algorithm which is more effective than the other.

Advances in chemical product design

DEFF Research Database (Denmark)

Zhang, Lei; Fung, Ka Yip; Wibowo, Christianto

2018-01-01

The nature of chemical product design problems is diverse and multidisciplinary. It involves many design issues such as project management, market study, product design, process design, and economic analysis for better organizing the product design project and achieving better products. This arti......The nature of chemical product design problems is diverse and multidisciplinary. It involves many design issues such as project management, market study, product design, process design, and economic analysis for better organizing the product design project and achieving better products....... This article provides an overview of chemical product design with a multidisciplinary hierarchical framework including all the design issues and tasks. Each of the design issues and tasks are introduced and discussed, methods and tools are summarized and compared, challenges and perspectives are presented...... to help the chemical product design researchers on finding more novel, innovative and sustainable products, by the combined effort from academia and industry to develop a systematic generic framework, and tools including product simulator, process simulator, database manager, modeling tool, and templates...

Research on the Integration of IT Network Technology and TV Production and Broadcasting System

Science.gov (United States)

Zhang, Wenqing

2017-12-01

In recent years, based on the development of China’s economy and the progress of science and technology, China’s TV industry has made great progress and provided a new platform for residents to understand the social situation. In this situation, in order to protect the efficiency of the TV system and the steady improvement on quality, technical staff have strengthened the rational use of IT technology, and as a basis to promote the sound of television production system. Based on this, this paper focuses on the connotation of IT network technology, and discusses the integration of the design and TV production system, hoping to realize the sustainable development of China’s TV industry.

Microbiological Spoilage of Cereal Products

Science.gov (United States)

Cook, Frederick K.; Johnson, Billie L.

A wide range of cereal products, including bakery items, refrigerated dough, fresh pasta products, dried cereal products, snack foods, and bakery mixes, are manufactured for food consumption. These products are subject to physical, chemical, and microbiological spoilage that affects the taste, aroma, leavening, appearance, and overall quality of the end consumer product. Microorganisms are ubiquitous in nature and have the potential for causing food spoilage and foodborne disease. However, compared to other categories of food products, bakery products rarely cause food poisoning. The heat that is applied during baking or frying usually eliminates pathogenic and spoilage microorganisms, and low moisture contributes to product stability. Nevertheless, microbiological spoilage of these products occurs, resulting in substantial economic losses.

Strategies of Production Control as Tools of Efficient Management of Production Enterprises

Science.gov (United States)

Budynek, Mateusz; Celińska, Elżbieta; Dybikowska, Adrianna; Kozak, Monika; Ratajczak, Joanna; Urban, Jagoda; Materne, Karolina

2016-03-01

The paper discusses the problem of principle methods of production control as a strategy supporting the production system and stimulating efficient solutions in respect management in production enterprises. The article describes MRP, ERP, JIT, KANBAN and TOC methods and focuses on their main goals, principles of functioning as well as benefits resulting from their application. The methods represent two diverse strategies of production control, i.e. pull and push strategies. Push strategies are used when the plans apply to the first and principle part of production and are based on the demand forecasts. Pull strategies are used when all planning decisions apply to the final stage and depend on the actual demand or orders from customers.

National pulpwood production, 2010

Science.gov (United States)

Ronald J. Piva; James W. Bentley; Steven W. Hayes

2014-01-01

U.S. pulpwood production amounted to 86.5 million cords in 2010, a decrease of 4 percent from 2008. Roundwood production totaled 65.7 million cords and accounted for 76 percent of the Nation's total pulpwood production. The Southern Region led the Nation in total production with 65.5 million cords, followed by the Northern Region with 12.8 million cords, and the...

Consumer Product Category Database

Science.gov (United States)

The Chemical and Product Categories database (CPCat) catalogs the use of over 40,000 chemicals and their presence in different consumer products. The chemical use information is compiled from multiple sources while product information is gathered from publicly available Material Safety Data Sheets (MSDS). EPA researchers are evaluating the possibility of expanding the database with additional product and use information.

The phosphorus fertilizer production as a source of rare-earth elements pollution of the environment

International Nuclear Information System (INIS)

Volokh, A.A.; Gorbunov, A.V.; Revich, B.A.; Gundorina, S.F.; Frontas'eva, M.V.; Chen Sen Pal.

1989-01-01

This paper considers some peculiarities of the production of phosphorus fertilizers from the point of view of the pollution of the environment with rare-earth elements. The principal possibility is demonstrated of the determination of the influence of a given type of production on the environment by measuring the change in the rare-arth elements interrelationship in the show. The main source of industrial dust is identified. The distribution of pollutants in dependence on the size of aerosol particles is given. The data on the concentrations of the pollutants in agricultural plants, employees hair and hair of local residents are also reported. 8 refs.; 4 figs.; 4 tabs

Production of activated carbon from TCR char

Science.gov (United States)

Stenzel, Fabian; Heberlein, Markus; Klinner, Tobias; Hornung, Andreas

2016-04-01

The utilization of char for adsorptive purposes is known since the 18th century. At that time the char was made of wood or bones and used for decoloration of fluids. In the 20th century the production of activated carbon in an industrial scale was started. The today's raw materials for activated carbon production are hard coal, peat, wood or coconut shells. All these materials entail costs especially the latter. Thus, the utilization of carbon rich residues (biomass) is an interesting economic opportunity because it is available for no costs or even can create income. The char is produced by thermo-catalytic reforming (TCR®). This process is a combination of an intermediate pyrolysis and subsequently a reforming step. During the pyrolysis step the material is decomposed in a vapor and a solid carbon enriched phase. In the second step the vapor and the solid phase get in an intensive contact and the quality of both materials is improved via the reforming process. Subsequently, the condensables are precipitated from the vapor phase and a permanent gas as well as oil is obtained. Both are suitable for heat and power production which is a clear advantage of the TCR® process. The obtained biochar from the TCR® process has special properties. This material has a very low hydrogen and oxygen content. Its stability is comparable to hard coal or anthracite. Therefore it consists almost only of carbon and ash. The latter depends from input material. Furthermore the surface structure and area can be influenced during the reforming step. Depending from temperature and residence time the number of micro pores and the surface area can be increased. Preliminary investigations with methylene blue solution have shown that a TCR® char made of digestate from anaerobic digestion has adsorptive properties. The decoloration of the solution was achieved. A further influencing factor of the adsorption performance is the particle size. Based on the results of the preliminary tests a

Product Quality and Worker Quality

OpenAIRE

Abowd, John M; Kramarz, Francis

1995-01-01

We study the relation between product quality and worker quality using an economic model that, under certain conditions, provides a direct link between product price, product quality and work-force quality. Our measures of product quality are the evolution in the detailed product price relative to its product group, and the level of the product price relative to this group. Our worker quality measures are the firm's average person effect and personal characteristics effect from individual wag...

Product Quality and Worker Quality

OpenAIRE

John M. ABOWD; Françis KRAMARZ; Antoine MOREAU

1996-01-01

We study the relation between product quality and worker quality using an economic model that, under certain conditions, provides a direct link between product price, product quality and work force quality. Our measures of product quality are the evolution in the detailed product price relative to its product group and the level of the product price relative to this group. Our worker quality measures are the firm's average person effect and personal characteristics effect from individual wage...

Perfusion cell culture decreases process and product heterogeneity in a head-to-head comparison with fed-batch.

Science.gov (United States)

Walther, Jason; Lu, Jiuyi; Hollenbach, Myles; Yu, Marcella; Hwang, Chris; McLarty, Jean; Brower, Kevin

2018-05-30

In this study, we compared the impacts of fed-batch and perfusion platforms on process and product attributes for IgG1- and IgG4-producing cell lines. A "plug-and-play" approach was applied to both platforms at bench scale, using commercially available basal and feed media, a standard feed strategy for fed-batch, and ATF filtration for perfusion. Product concentration in fed-batch was 2.5 times greater than perfusion, while average productivity in perfusion was 7.5 times greater than fed-batch. PCA revealed more variability in the cell environment and metabolism during the fed-batch run. LDH measurements showed that exposure of product to cell lysate was 7-10 times greater in fed-batch. Product analysis shows larger abundances of neutral species in perfusion, likely due to decreased bioreactor residence times and extracellular exposure. The IgG1 perfusion product also had higher purity and lower half-antibody. Glycosylation was similar across both culture modes. The first perfusion harvest slice for both product types showed different glycosylation than subsequent harvests, suggesting that product quality lags behind metabolism. In conclusion, process and product data indicate that intra-lot heterogeneity is decreased in perfusion cultures. Additional data and discussion is required to understand the developmental, clinical and commercial implications, and in what situations increased uniformity would be beneficial. This article is protected by copyright. All rights reserved.

Design of resilient consumer products

DEFF Research Database (Denmark)

Haug, Anders

2016-01-01

Consumer product sustainability is a topic that has been of increasing interest to practice and academia in recent decades. In this context, a widely discussed means of achieving sustainability is to design more durable products, thereby reducing the need for the production of new products....... In particular, the emotional perspective on product durability has received attention in recent design literature, since consumer products are often replaced long before they become physically non-functioning. However, the literature does not provide a full account of the causes of product replacement...... for designers to design resilient consumer products and for researchers to engage in further studies....

Low income product innovation

Directory of Open Access Journals (Sweden)

Maria Cecília Sobral

2008-10-01

Full Text Available At affluent markets, the literature on product development management tells us to aggregate value and technology, to differentiate products and to launch fast. And at the low-income markets? This exploratory research defines a popular product, characterizes and measures their markets in Brazil, and identifies innovation strategies for them. The results suggest that the effective strategic orientation differs from affluent markets. It includes: to enhance the auto service component; to identify and service the key functionalities to the targeted public; to standardize products and increase the production scale; to extend the product life cycle; to use convenient distribution and marketing channels; to build product images that have appeal in the popular market; to offer longer financing horizons with befittingly lower installments. Data came from market researches and general demographic census. General media published stories were used to identify companies and their strategies. And a few case studies allowed the authors a deeper exploration of the relevant themes.

Production of Fungal Glucoamylase for Glucose Production from Food Waste

Directory of Open Access Journals (Sweden)

Carol Sze Ki Lin

2013-09-01

Full Text Available The feasibility of using pastry waste as resource for glucoamylase (GA production via solid state fermentation (SSF was studied. The crude GA extract obtained was used for glucose production from mixed food waste. Our results showed that pastry waste could be used as a sole substrate for GA production. A maximal GA activity of 76.1 ± 6.1 U/mL was obtained at Day 10. The optimal pH and reaction temperature for the crude GA extract for hydrolysis were pH 5.5 and 55 °C, respectively. Under this condition, the half-life of the GA extract was 315.0 minutes with a deactivation constant (kd 2.20 × 10−3minutes−1. The application of the crude GA extract for mixed food waste hydrolysis and glucose production was successfully demonstrated. Approximately 53 g glucose was recovered from 100 g of mixed food waste in 1 h under the optimal digestion conditions, highlighting the potential of this approach as an alternative strategy for waste management and sustainable production of glucose applicable as carbon source in many biotechnological processes.

Production of Fungal Glucoamylase for Glucose Production from Food Waste

Science.gov (United States)

Lam, Wan Chi; Pleissner, Daniel; Lin, Carol Sze Ki

2013-01-01

The feasibility of using pastry waste as resource for glucoamylase (GA) production via solid state fermentation (SSF) was studied. The crude GA extract obtained was used for glucose production from mixed food waste. Our results showed that pastry waste could be used as a sole substrate for GA production. A maximal GA activity of 76.1 ± 6.1 U/mL was obtained at Day 10. The optimal pH and reaction temperature for the crude GA extract for hydrolysis were pH 5.5 and 55 °C, respectively. Under this condition, the half-life of the GA extract was 315.0 minutes with a deactivation constant (kd) 2.20 × 10−3 minutes−1. The application of the crude GA extract for mixed food waste hydrolysis and glucose production was successfully demonstrated. Approximately 53 g glucose was recovered from 100 g of mixed food waste in 1 h under the optimal digestion conditions, highlighting the potential of this approach as an alternative strategy for waste management and sustainable production of glucose applicable as carbon source in many biotechnological processes. PMID:24970186

User's guide: Nimbus-7 Earth radiation budget narrow-field-of-view products. Scene radiance tape products, sorting into angular bins products, and maximum likelihood cloud estimation products

Science.gov (United States)

Kyle, H. Lee; Hucek, Richard R.; Groveman, Brian; Frey, Richard

1990-01-01

The archived Earth radiation budget (ERB) products produced from the Nimbus-7 ERB narrow field-of-view scanner are described. The principal products are broadband outgoing longwave radiation (4.5 to 50 microns), reflected solar radiation (0.2 to 4.8 microns), and the net radiation. Daily and monthly averages are presented on a fixed global equal area (500 sq km), grid for the period May 1979 to May 1980. Two independent algorithms are used to estimate the outgoing fluxes from the observed radiances. The algorithms are described and the results compared. The products are divided into three subsets: the Scene Radiance Tapes (SRT) contain the calibrated radiances; the Sorting into Angular Bins (SAB) tape contains the SAB produced shortwave, longwave, and net radiation products; and the Maximum Likelihood Cloud Estimation (MLCE) tapes contain the MLCE products. The tape formats are described in detail.

Can Differentiated Production Planning and Control enable both Responsiveness and Efficiency in Food Production?

Directory of Open Access Journals (Sweden)

Anita Romsdal

2014-07-01

Full Text Available This paper addresses the complex production planning and control (PPC challenges in food supply chains. The study illustrates how food producers' traditional make‐to‐stock (MTS approach is not well suited to meet the trends of increasing product variety, higher demand uncertainty, increasing sales of fresh food products and more demanding customers. The paper proposes a framework for differentiated PPC that combines MTS with make‐to‐order (MTO.The framework matches products with the most appropriate PPC approaches and buffering techniques depending on market and product characteristics. The core idea is to achieve more volume flexibility in the production system by exploiting favourable product and market characteristics (high demand predictability, long customer order leadtime allowances and low product perishability. A case study is used to demonstrate how the framework can enable food producers to achieve efficiency in production, inventory and PPC processes – and simultaneously be responsive to market requirements.

Joint production and corporate pricing: An empirical analysis of joint products in the petroleum industry

International Nuclear Information System (INIS)

Karimnejad, H.

1990-01-01

This dissertation investigates the pricing mechanism of joint products in large multi-plant and multi-product corporations. The primary objective of this dissertation is to show the consistency of classical theories of production with corporate pricing of joint products. This dissertation has two major parts. Part One provides a theoretical framework for joint production and corporate pricing. In this part, joint production is defined and its historical treatment by classical and contemporary economists is analyzed. Part Two conducts an empirical analysis of joint products in the US petroleum industry. Methods of cost allocation are used in the pricing of each individual petroleum product. Three methods are employed to distribute joint production costs to individual petroleum products. These methods are, the sales value method, the barrel gravity method and the average unit cost method. The empirical findings of dissertation provide useful guidelines for pricing policies of large multi-product corporations

Improvement of succinate production by release of end-product inhibition in Corynebacterium glutamicum.

Science.gov (United States)

Chung, Soon-Chun; Park, Joon-Song; Yun, Jiae; Park, Jin Hwan

2017-03-01

Succinate is a renewable-based platform chemical that may be used to produce a wide range of chemicals including 1,4-butanediol, tetrahydrofurane, and γ-butyrolactone. However, industrial fermentation of organic acids is often subject to end-product inhibition, which significantly retards cell growth and limits metabolic activities and final productivity. In this study, we report the development of metabolically engineered Corynebacterium glutamicum for high production of succinate by release of end-product inhibition coupled with an increase of key metabolic flux. It was found that the rates of glucose consumption and succinate production were significantly reduced by extracellular succinate in an engineered strain, S003. To understand the mechanism underlying the inhibition by succinate, comparative transcriptome analysis was performed. Among the downregulated genes, overexpression of the NCgl0275 gene was found to suppress the inhibition of glucose consumption and succinate production, resulting in a 37.7% increase in succinate production up to 55.4g/L in fed-batch fermentation. Further improvement was achieved by increasing the metabolic flux from PEP to OAA. The final engineered strain was able to produce 152.2g/L succinate, the highest production reported to date, with a yield of 1.1g/g glucose under anaerobic condition. These results suggest that the release of end-product inhibition coupled with an increase in key metabolic flux is a promising strategy for enhancing production of succinate. Copyright © 2017. Published by Elsevier Inc.