WorldWideScience

Sample records for research vessel trawl

  1. Research vessels

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, P.S.

    The role of the research vessels as a tool for marine research and exploration is very important. Technical requirements of a suitable vessel and the laboratories needed on board are discussed. The history and the research work carried out...

  2. Cooperative Research Paired Trawl Sweep Comparison Study

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In the spring of 2009, Northeast Fisheries Science Center (NEFSC) replaced the previous standard bottom trawl gear (Yankee 36) with a new standard survey trawl...

  3. Cooperative Research Twin Trawl Sweep Comparison Study

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The "Twin-Trawl Sweep Efficiency Study" was intended to compare the sweep efficiency and selectivity of the NEFSC standardized bottom trawl to that of a standardized...

  4. 76 FR 57679 - Fisheries of the Exclusive Economic Zone Off Alaska; Shallow-Water Species by Vessels Using Trawl...

    Science.gov (United States)

    2011-09-16

    .... 101126522-0640-02] RIN 0648-XA704 Fisheries of the Exclusive Economic Zone Off Alaska; Shallow- Water... closure. SUMMARY: NMFS is opening directed fishing for shallow-water species by vessels using trawl gear... apportionment of the 2011 Pacific halibut bycatch allowance specified for the trawl shallow-water species...

  5. 75 FR 56017 - Fisheries of the Exclusive Economic Zone Off Alaska; Shallow-Water Species by Vessels Using Trawl...

    Science.gov (United States)

    2010-09-15

    .... 0910131362-0087-02] RIN 0648-XZ06 Fisheries of the Exclusive Economic Zone Off Alaska; Shallow- Water Species... closure. SUMMARY: NMFS is opening directed fishing for shallow-water species by vessels using trawl gear... of the 2010 Pacific halibut bycatch allowance specified for the trawl shallow-water species fishery...

  6. Analyses of Trawling Track and Fishing Activity Based on the Data of Vessel Monitoring System (VMS):A Case Study of the Single Otter Trawl Vessels in the Zhoushan Fishing Ground

    Institute of Scientific and Technical Information of China (English)

    WANG Yang; WANG Yingbin; ZHENG Ji

    2015-01-01

    The original purpose of Vessel Monitoring System (VMS) is for enforcement and control of vessel sailing. With the ap-plication of VMS in fishing vessels, more and more population dynamic studies have used VMS data to improve the accuracy of fisheries stock assessment. In this paper, we simulated the trawl trajectory under different time intervals using the cubic Hermite spline (cHs) interpolation method based on the VMS data of 8 single otter trawl vessels (totally 36000 data items) fishing in Zhou-shan fishing ground from September 2012 to December 2012, and selected the appropriate time interval. We then determined vessels’ activities (fishing or non-fishing) by comparing VMS speed data with the corresponding speeds from logbooks. The results showed that the error of simulated trajectory greatly increased with the increase of time intervals of VMS data when they were longer than 30 minutes. Comparing the speeds from VMS with those from the corresponding logbooks, we found that the vessels’ speeds were be-tween 2.5kn and 5.0kn in fishing. The cHs interpolation method is a new choice for improving the accuracy of estimation of sailing trajectory, and the VMS can be used to determine the vessels’ activities with the analysis of their trajectories and speeds. Therefore, when the fishery information is limited, VMS can be one of the important data sources for fisheries stock assessment, and more at-tention should be paid to its construction and application to fisheries stock assessment and management.

  7. Microplastic sampling with the AVANI trawl compared to two neuston trawls in the Bay of Bengal and South Pacific.

    Science.gov (United States)

    Eriksen, Marcus; Liboiron, Max; Kiessling, Tim; Charron, Louis; Alling, Abigail; Lebreton, Laurent; Richards, Heather; Roth, Barent; Ory, Nicolas C; Hidalgo-Ruz, Valeria; Meerhoff, Erika; Box, Carolynn; Cummins, Anna; Thiel, Martin

    2018-01-01

    Many typical neuston trawls can only be used during relatively calm sea states and slow tow speeds. During two expeditions to the Bay of Bengal and the eastern South Pacific we investigated whether the new, high-speed AVANI trawl (All-purpose Velocity Accelerated Net Instrument) collects similar amounts and types of microplastics as two established scientific trawl designs, the manta trawl and the DiSalvo neuston net. Using a 335 μm net, the AVANI trawl can collect microplastics from the sea surface at speeds up to 8 knots as it "skis" across the surface, whereas the manta and DiSalvo neuston trawls must be towed slowly in a less turbulent sea state and often represent shorter tow lengths. Generally, the AVANI trawl collected a greater numerical abundance and weight of plastic particles in most size classes and debris types than the manta trawl and DiSalvo neuston net, likely because these trawls only skim the surface layer while the AVANI trawl, moving vertically in a random fashion, collects a "deeper" sample, capturing the few plastics that float slightly lower in the water column. However, the samples did not differ enough that results were significantly affected, suggesting that studies done with these different trawls are comparable. The advantage of the AVANI trawl over traditional research trawls is that it allows for collection on vessels underway at high speeds and during long transits, allowing for a nearly continuous sampling effort over long distances. As local surface currents make sea surface abundance widely heterogeneous, widely spaced short-tow trawls, such as the manta and DiSalvo trawls, can catch or miss hotspots or meso-scale variability of microplastic accumulations, whereas the AVANI trawl, if utilized for back-to-back tows of intermediate distances (5-10 km), can bridge variable wind conditions and debris concentrations potentially reducing variance and provide a greater resolution of spatial distribution. Copyright © 2017 Elsevier Ltd

  8. Catcher Vessel Cost Earnings Data - Economic Data Collection for Monitoring the Economic Effects of the West Coast Groundfish Trawl Rationalization Program

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project was initiated in response to regulation 50 CFR 660.114, which mandates that economic data be collected from every participant in the trawl...

  9. Precision in systematic trawl surveys as assessed from replicate ...

    African Journals Online (AJOL)

    Local variability was analysed as random noise, modelled and later reapplied ... The main statistical techniques applied were less susceptible to outlier catches ... be used to estimate the vessel factor when intercalibrating trawl survey vessels.

  10. The footprint of bottom trawling in European waters

    NARCIS (Netherlands)

    Eigaard, Ole R.; Bastardie, Francois; Hintzen, Niels T.; Buhl-Mortensen, Lene; Buhl-Mortensen, Pål; Catarino, Rui; Dinesen, Grete E.; Egekvist, Josefine; Fock, Heino O.; Geitner, Kerstin; Gerritsen, Hans D.; González, Manuel Marín; Jonsson, Patrik; Kavadas, Stefanos; Laffargue, Pascal; Lundy, Mathieu; Gonzalez-Mirelis, Genoveva; Nielsen, J.R.; Papadopoulou, Nadia; Posen, Paulette E.; Pulcinella, Jacopo; Russo, Tommaso; Sala, Antonello; Silva, Cristina; Smith, Christopher J.; Vanelslander, Bart; Rijnsdorp, Adriaan D.

    2017-01-01

    Mapping trawling pressure on the benthic habitats is needed as background to support an ecosystem approach to fisheries management. The extent and intensity of bottom trawling on the European continental shelf (0-1000 m) was analysed from logbook statistics and vessel monitoring system data for

  11. Integrating Multiple Autonomous Underwater Vessels, Surface Vessels and Aircraft into Oceanographic Research Vessel Operations

    Science.gov (United States)

    McGillivary, P. A.; Borges de Sousa, J.; Martins, R.; Rajan, K.

    2012-12-01

    Autonomous platforms are increasingly used as components of Integrated Ocean Observing Systems and oceanographic research cruises. Systems deployed can include gliders or propeller-driven autonomous underwater vessels (AUVs), autonomous surface vessels (ASVs), and unmanned aircraft systems (UAS). Prior field campaigns have demonstrated successful communication, sensor data fusion and visualization for studies using gliders and AUVs. However, additional requirements exist for incorporating ASVs and UASs into ship operations. For these systems to be optimally integrated into research vessel data management and operational planning systems involves addressing three key issues: real-time field data availability, platform coordination, and data archiving for later analysis. A fleet of AUVs, ASVs and UAS deployed from a research vessel is best operated as a system integrated with the ship, provided communications among them can be sustained. For this purpose, Disruptive Tolerant Networking (DTN) software protocols for operation in communication-challenged environments help ensure reliable high-bandwidth communications. Additionally, system components need to have considerable onboard autonomy, namely adaptive sampling capabilities using their own onboard sensor data stream analysis. We discuss Oceanographic Decision Support System (ODSS) software currently used for situational awareness and planning onshore, and in the near future event detection and response will be coordinated among multiple vehicles. Results from recent field studies from oceanographic research vessels using AUVs, ASVs and UAS, including the Rapid Environmental Picture (REP-12) cruise, are presented describing methods and results for use of multi-vehicle communication and deliberative control networks, adaptive sampling with single and multiple platforms, issues relating to data management and archiving, and finally challenges that remain in addressing these technological issues. Significantly, the

  12. Pressure Vessel Steel Research: Belgian Activities

    International Nuclear Information System (INIS)

    Van Walle, E.; Fabry, A.; Ait Abderrahim, H.; Chaouadi, R.; D'hondt, P.; Puzzolante, J.L.; Van de Velde, J.; Van Ransbeeck, T.; Gerard, R.

    1994-03-01

    A review of the Belgian research activities on Nuclear Reactor Pressure Vessel Steels (RPVS) and on related Neutron Dosimetry Aspects is presented. Born out of the surveillance programmes of the Belgian nuclear power plants, this research has lead to the development of material saving techniques, like reconstitution and miniaturization, and to improved neutron dosimetry techniques. A physically- justified RPVS fracture toughness indexation methodology, supported by micro-mechanistic modelling, is based on the elaborate use of the instrumented Charpy impact signal. Computational tools for neutron dosimetry allow to reduce the uncertainties on surveillance capsule fluences significantly

  13. Pressure Vessel Steel Research: Belgian Activities

    Energy Technology Data Exchange (ETDEWEB)

    Van Walle, E; Fabry, A; Ait Abderrahim, H; Chaouadi, R; D` hondt, P; Puzzolante, J L; Van de Velde, J; Van Ransbeeck, T [Centre d` Etude de l` Energie Nucleaire, Mol (Belgium); Gerard, R [TRACTEBEL, Brussels (Belgium)

    1994-03-01

    A review of the Belgian research activities on Nuclear Reactor Pressure Vessel Steels (RPVS) and on related Neutron Dosimetry Aspects is presented. Born out of the surveillance programmes of the Belgian nuclear power plants, this research has lead to the development of material saving techniques, like reconstitution and miniaturization, and to improved neutron dosimetry techniques. A physically- justified RPVS fracture toughness indexation methodology, supported by micro-mechanistic modelling, is based on the elaborate use of the instrumented Charpy impact signal. Computational tools for neutron dosimetry allow to reduce the uncertainties on surveillance capsule fluences significantly.

  14. Deep Trawl Dataset

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Otter trawl (36' Yankee and 4-seam net deepwater gear) catches from mid-Atlantic slope and canyons at 200 - 800 m depth. Deep-sea (200-800 m depth) flat otter trawls...

  15. Drone Use in Monioring Open Ocean Surface Debris, Including Paired Manta and Tucker Trawls for Relateing Sea State to Vertical Debris Distribution

    Science.gov (United States)

    Lattin, G.

    2016-02-01

    Monitoring debris at sea presents challenges not found in beach or riverine habitats, and is typically done with trawl nets of various apertures and mesh sizes, which limits the size of debris captured and the area surveyed. To partially overcome these limitations in monitoring floating debris, a Quadcopter drone with video transmitting and recording capabilities was deployed at the beginning and the end of manta trawl transects within the North Pacific Subtropical Gyre's eastern convergence zone. Subsurface tucker trawls at 10 meters were conducted at the same time as the manta trawls, in order to assess the effect of sea state on debris dispersal. Trawls were conducted on an 11 station grid used repeatedly since 1999. For drone observations, the operator and observer were stationed on the mother ship while two researchers collected observed debris using a rigid inflatable boat (RIB). The drone was flown to a distance of approximately 100 meters from the vessel in a zigzag or circular search pattern. Here we examine issues arising from drone deployment during the survey: 1) relation of area surveyed by drone to volume of water passing through trawl; 2) retrieval of drone-spotted and associated RIB spotted debris. 3) integrating post- flight image analysis into retrieved debris quantification; and 4) factors limiting drone effectiveness at sea. During the survey, debris too large for the manta trawl was spotted by the drone, and significant debris not observed using the drone was recovered by the RIB. The combination of drone sightings, RIB retrieval, and post flight image analysis leads to improved monitoring of debris at sea. We also examine the issue of the distribution of floating debris during sea states varying from 0-5 by comparing quantities from surface manta trawls to the tucker trawls at a nominal depth of 10 meters.

  16. Improving fishing effort descriptors: Modelling engine power and gear-size relations of five European trawl fleets

    DEFF Research Database (Denmark)

    Eigaard, Ole Ritzau; Rihan, Dominic; Graham, Norman

    2011-01-01

    Based on information from an international inventory of gears currently deployed by trawlers in five European countries, the relationship between vessel engine power and trawl size is quantified for different trawl types, trawling techniques and target species. Using multiplicative modelling it i...

  17. Fall Bottom Trawl Survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The standardized NEFSC Fall Bottom Trawl Survey was initiated in 1963 and covered an area from Hudson Canyon, NY to Nova Scotia, Canada. Throughout the years,...

  18. Summer Bottom Trawl Survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Sampling the coastal waters of the Gulf of Maine using the Northeast Fishery Science Center standardized bottom trawl has been problematic due to large areas of hard...

  19. Spring Bottom Trawl Survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The standardized NEFSC Spring Bottom Trawl Survey was initiated in 1968 and covered an area from Cape Hatteras, NC, to Nova Scotia, Canada, at depths >27m....

  20. Winter Bottom Trawl Survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The standardized NEFSC Winter Bottom Trawl Survey was initiated in 1992 and covered offshore areas from the Mid-Atlantic to Georges Bank. Inshore strata were covered...

  1. FRD Trawl Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Fish captured in trawls by the SWFSC Fisheries Resources Division during surveys for coastal pelagic species. Most tows were targeted for sardine using a Nordic...

  2. 78 FR 9024 - Sea Turtle Conservation; Shrimp Trawling Requirements

    Science.gov (United States)

    2013-02-07

    ... restriction and require all skimmer trawls, pusher-head trawls, and wing nets (butterfly trawls) rigged for... purposes of this notice, skimmer trawls, pusher-head trawls, and wing nets (butterfly trawls) will be... trawls, pusher-head trawls, and wing nets (butterfly trawls) in the Gulf of Mexico to use TEDs in their...

  3. Research program plan: reactor vessels. Volume 1

    International Nuclear Information System (INIS)

    Vagins, M.; Taboada, A.

    1985-07-01

    The ability of the licensing staff of the NRC to make decisions concerning the present and continuing safety of nuclear reactor pressure vessels under both normal and abnormal operating conditions is dependent upon the existence of verified analysis methods and a solid background of applicable experimental data. It is the role of this program to provide both the analytical methods and the experimental data needed. Specifically, this program develops fracture mechanics analysis methods and design criteria for predicting the stress levels and flaw sizes required for crack initiation, propagation, and arrest in LWR pressure vessels under all known and postulated operations conditions. To do this, not only must the methods be developed but they must be experimentally validated. Further, the materials data necessary for input to these analytical methods must be developed. Thus, in addition to methods development and large scale experimental verification this program also develops data to show that slow-load fracture toughness, rapid-load fracture toughness, and crack arrest toughness obtained from small laboratory specimens are truly representative of the toughness characteristics of the material behavior in pressure vessels in both the unirradiated and the irradiated conditions

  4. A Dataset of Deep-Sea Fishes Surveyed by Research Vessels in the Waters around Taiwan

    Directory of Open Access Journals (Sweden)

    Kwang-Tsao Shao

    2014-12-01

    Full Text Available The study of deep-sea fish fauna is hampered by a lack of data due to the difficulty and high cost incurred in its surveys and collections. Taiwan is situated along the edge of the Eurasia fig, at the junction of three Large Marine Ecosystems or Ecoregions of the East China Sea, South China Sea and the Philippines. As nearly two-thirds of its surrounding marine ecosystems are deep-sea environments, Taiwan is expected to hold a rich diversity of deep-sea fish. However, in the past, no research vessels were employed to collect fish data on site. Only specimens, caught by bottom trawl fishing in the waters hundreds of meters deep and missing precise locality information, were collected from Dasi and Donggang fishing harbors. Began in 2001, with the support of National Science Council, research vessels were made available to take on the task of systematically collecting deep-sea fish specimens and occurrence records in the waters surrounding Taiwan. By the end of 2006, a total of 3,653 specimens, belonging to 26 orders, 88 families, 198 genera and 366 species, were collected in addition to data such as sampling site geographical coordinates and water depth, and fish body length and weight. The information, all accessible from the “Database of Taiwan’s Deep-Sea Fauna and Its Distribution (http://deepsea.biodiv.tw/” as part of the “Fish Database of Taiwan,” can benefit the study of temporal and spatial changes in distribution and abundance of fish fauna in the context of global deep-sea biodiversity.

  5. Reactor pressure vessel structural integrity research

    International Nuclear Information System (INIS)

    Pennell, W.E.; Corwin, W.R.

    1994-01-01

    Development continues on the technology used to assess the safety of irradiation-embrittled nuclear reactor pressure vessels (RPVs) containing flaws. Fracture mechanics tests on RPV steel, coupled with detailed elastic-plastic finite-element analyses of the crack-tip stress fields, have shown that (1) constraint relaxation at the crack tip of shallow surface flaws results in increased data scatter but no increase in the lower-bound fracture toughness, (2) the nil ductility temperature (NDT) performs better than the reference temperature for nil ductility transition (RT NDT ) as a normalizing parameter for shallow-flaw fracture toughness data, (3) biaxial loading can reduce the shallow-flaw fracture toughness, (4) stress-based dual-parameter fracture toughness correlations cannot predict the effect of biaxial loading on shallow-flaw fracture toughness because in-plane stresses at the crack tip are not influenced by biaxial loading, and (5) an implicit strain-based dual-parameter fracture toughness correlation can predict the effect of biaxial loading on shallow-flaw fracture toughness. Experimental irradiation investigations have shown that (1) the irradiation-induced shift in Charpy V-notch vs temperature behavior may not be adequate to conservatively assess fracture toughness shifts due to embrittlement, and (2) the wide global variations of initial chemistry and fracture properties of a nominally uniform material within a pressure vessel may confound accurate integrity assessments that require baseline properties

  6. Development of an integrated data acquision system for research vessels

    Digital Repository Service at National Institute of Oceanography (India)

    Mehra, P.; Desai, R.G.P.

    This article describes an integrated data acquisition system (IDAS) designed and developed for multi-oceanographic research vessels. The prime motivation was to provide a flexible system, which could be used in the context of ocean related...

  7. AFSC/REFM: Digitized 2005 GOA Trawl Logbooks merged with Fish Ticket and Observer data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data include a full year of logbook forms for vessels 60-124 feet in length (the partial coverage fleet) that had participated in the trawl flatfish fishery of...

  8. Possible research program on a large scale nuclear pressure vessel

    International Nuclear Information System (INIS)

    1983-01-01

    The nuclear pressure vessel structural integrity is actually one of the main items in the nuclear plants safety field. An international study group aimed at investigating the feasibility of a ''possible research program'' on a scale 1:1 LWR pressure vessel. This report presents the study group's work. The different research programs carried out or being carried out in various countries of the European Community are presented (phase I of the study). The main characteristics of the vessel considered for the program and an evaluation of activities required for making them available are listed. Research topic priorities from the different interested countries are summarized in tables (phase 2); a critical review by the study group of the topic is presented. Then, proposals for possible experimental programs and combination of these programs are presented, only as examples of possible useful research activities. The documents pertaining to the results of phase I inquiry performed by the study group are reported in the appendix

  9. Bottom Trawl Survey Protocol Development (HB0706, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Cruise objectives include: 1) Investigate performance characteristics of new research bottom trawl; 2) Develop standard operating procedures for the NEFSC Bottom...

  10. AFSC/FMA/Vessel Assessment Logging

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Vessels fishing trawl gear, vessels fishing hook-and-line and pot gear that are also greater than 57.5 feet overall, and shoreside and floating processing facilities...

  11. Arctic research vessel design would expand science prospects

    Science.gov (United States)

    Elsner, Robert; Kristensen, Dirk

    The U.S. polar marine science community has long declared the need for an arctic research vessel dedicated to advancing the study of northern ice-dominated seas. Planning for such a vessel began 2 decades ago, but competition for funding has prevented construction. A new design program is underway, and it shows promise of opening up exciting possibilities for new research initiatives in arctic marine science.With its latest design, the Arctic Research Vessel (ARV) has grown to a size and capability that will make it the first U.S. academic research vessel able to provide access to the Arctic Ocean. This ship would open a vast arena for new studies in the least known of the world's seas. These studies promise to rank high in national priority because of the importance of the Arctic Ocean as a source of data relating to global climate change. Other issues that demand attention in the Arctic include its contributions to the world's heat budget, the climate history buried in its sediments, pollution monitoring, and the influence of arctic conditions on marine renewable resources.

  12. Distribution of Bottom Trawling Effort in the Yellow Sea and East China Sea.

    Directory of Open Access Journals (Sweden)

    Shengmao Zhang

    Full Text Available Bottom trawling is one of the most efficient fishing activities, but serious and persistent ecological issues have been observed by fishers, scientists and fishery managers. Although China has applied the Beidou fishing vessel position monitoring system (VMS to manage trawlers since 2006, little is known regarding the impacts of trawling on the sea bottom environments. In this study, continuous VMS data of the 1403 single-rig otter trawlers registered in the Xiangshan Port, 3.9% of the total trawlers in China, were used to map the trawling effort in 2013. We used the accumulated distance (AD, accumulated power distance (APD, and trawling intensity as indexes to express the trawling efforts in the Yellow Sea (YS and East China Sea (ECS. Our results show that all three indexes had similar patterns in the YS and ECS, and indicated a higher fishing effort of fishing grounds that were near the port. On average, the seabed was trawled 0.73 times in 2013 over the entire fishing region, and 51.38% of the total fishing grounds were with no fishing activities. Because of VMS data from only a small proportion of Chinese trawlers was calculated fishing intensity, more VMS data is required to illustrate the overall trawling effort in China seas. Our results enable fishery managers to identify the distribution of bottom trawling activities in the YS and ECS, and hence to make effective fishery policy.

  13. Vessel-related problems in severe accidents, International Research Projects

    International Nuclear Information System (INIS)

    Figueras, J. M.

    2000-01-01

    The paper describes those most relevant aspects of research programmes and projects, on the behavior of vessel during severe accidents with partial or total reactor core fusion, performed during the last twenty years or still on-going projects, by countries or international organizations in the nuclear community, presenting the most important technical aspects, in particular the results achieved, as well as the financial and organisational aspects. The paper concludes that, throughout a joint effort of the international nuclear community, in which Spain has been present via private and public organizations, actually exist a reasonable technical and experimental knowledge of the vessel in case of severe accidents, but still there are aspects not fully solved which are the basis for continuing some programmes and for proposal of new ones. (Author)

  14. Research and development of the prestressed concrete reactor vessel

    International Nuclear Information System (INIS)

    Shiozawa, Shoji; Omata, Ippei; Nakamura, Norio

    1975-01-01

    Compared with the steel reactor vessel, the prestressed concrete reactor vessel (PCRV) is said to be superior in safety and economy. One of the characteristics of the high temperature gas cooled reactor (HTGR) is the adoption of the PCRV instead of the steel reactor vessel to ensure safety. In order to improve safety characteristics, it is necessary for the PCRV to be provided with more reliable functions. When the multi-purpose HTGR or the gas cooled fast breeder reactor (GCFR) are realized in future, more severe conditions of technology will be imposed on the PCRV, and accordingly, technical developments are now increasingly required. IHI is now proceeding with the technical research and development on the PCRV, in which a basic study of its liner cooling system has already been completed. In this study applying a large cylindrical PCRV model, comparison was made between experimental data and analyses concerning the liner cooling system, and the results of analytical technique have been evaluated. The analytical technique established this time is applicable to the estimation of temperature distribution in the concrete of a large PCRV and also to the evaluation of the liner cooling system. (auth.)

  15. Nearshore marine fish diversity in southern California using trawl information from the Southern California Coastal Water Research Project.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This is a point file of mean fish diversity within 5 minute grid cells. The Shannon Index of diversity was calculated from Southern California Coastal Water Research...

  16. Integer-valued trawl processes

    DEFF Research Database (Denmark)

    Barndorff-Nielsen, Ole E.; Lunde, Asger; Shephard, Neil

    2014-01-01

    the probabilistic properties of such processes in detail and, in addition, study volatility modulation and multivariate extensions within the new modelling framework. Moreover, we describe how the parameters of a trawl process can be estimated and obtain promising estimation results in our simulation study. Finally......This paper introduces a new continuous-time framework for modelling serially correlated count and integer-valued data. The key component in our new model is the class of integer-valued trawl processes, which are serially correlated, stationary, infinitely divisible processes. We analyse...

  17. Patterns of dolphin bycatch in a north-western Australian trawl fishery.

    Science.gov (United States)

    Allen, Simon J; Tyne, Julian A; Kobryn, Halina T; Bejder, Lars; Pollock, Kenneth H; Loneragan, Neil R

    2014-01-01

    The bycatch of small cetaceans in commercial fisheries is a global wildlife management problem. We used data from skippers' logbooks and independent observers to assess common bottlenose dolphin (Tursiops truncatus) bycatch patterns between 2003 and 2009 in the Pilbara Trawl Fishery, Western Australia. Both datasets indicated that dolphins were caught in all fishery areas, across all depths and throughout the year. Over the entire datasets, observer reported bycatch rates (n = 52 dolphins in 4,124 trawls, or 12.6 dolphins/1,000 trawls) were ca. double those reported by skippers (n = 180 dolphins in 27,904 trawls, or 6.5 dolphins/1,000 trawls). Generalised Linear Models based on observer data, which better explained the variation in dolphin bycatch, indicated that the most significant predictors of dolphin catch were: (1) vessel--one trawl vessel caught significantly more dolphins than three others assessed; (2) time of day--the lowest dolphin bycatch rates were between 00:00 and 05:59; and (3) whether nets included bycatch reduction devices (BRDs)--the rate was reduced by ca. 45%, from 18.8 to 10.3 dolphins/1,000 trawls, after their introduction. These results indicated that differences among vessels (or skippers' trawling techniques) and dolphin behavior (a diurnal pattern) influenced the rates of dolphin capture; and that spatial or seasonal adjustments to trawling effort would be unlikely to significantly reduce dolphin bycatch. Recent skipper's logbook data show that dolphin bycatch rates have not declined since those reported in 2006, when BRDs were introduced across the fishery. Modified BRDs, with top-opening escape hatches from which dolphins might escape to the surface, may be a more effective means of further reducing dolphin bycatch. The vulnerability of this dolphin population to trawling-related mortality cannot be assessed in the absence of an ongoing observer program and without information on trawler-associated dolphin community size

  18. Patterns of dolphin bycatch in a north-western Australian trawl fishery.

    Directory of Open Access Journals (Sweden)

    Simon J Allen

    Full Text Available The bycatch of small cetaceans in commercial fisheries is a global wildlife management problem. We used data from skippers' logbooks and independent observers to assess common bottlenose dolphin (Tursiops truncatus bycatch patterns between 2003 and 2009 in the Pilbara Trawl Fishery, Western Australia. Both datasets indicated that dolphins were caught in all fishery areas, across all depths and throughout the year. Over the entire datasets, observer reported bycatch rates (n = 52 dolphins in 4,124 trawls, or 12.6 dolphins/1,000 trawls were ca. double those reported by skippers (n = 180 dolphins in 27,904 trawls, or 6.5 dolphins/1,000 trawls. Generalised Linear Models based on observer data, which better explained the variation in dolphin bycatch, indicated that the most significant predictors of dolphin catch were: (1 vessel--one trawl vessel caught significantly more dolphins than three others assessed; (2 time of day--the lowest dolphin bycatch rates were between 00:00 and 05:59; and (3 whether nets included bycatch reduction devices (BRDs--the rate was reduced by ca. 45%, from 18.8 to 10.3 dolphins/1,000 trawls, after their introduction. These results indicated that differences among vessels (or skippers' trawling techniques and dolphin behavior (a diurnal pattern influenced the rates of dolphin capture; and that spatial or seasonal adjustments to trawling effort would be unlikely to significantly reduce dolphin bycatch. Recent skipper's logbook data show that dolphin bycatch rates have not declined since those reported in 2006, when BRDs were introduced across the fishery. Modified BRDs, with top-opening escape hatches from which dolphins might escape to the surface, may be a more effective means of further reducing dolphin bycatch. The vulnerability of this dolphin population to trawling-related mortality cannot be assessed in the absence of an ongoing observer program and without information on trawler-associated dolphin community

  19. Job Satisfaction in the Shrimp Trawl Fisheries of Vietnam

    Science.gov (United States)

    Sinh, Le Xuan

    2012-01-01

    This paper investigates the job satisfaction of small-scale shrimp trawl fishers in the vicinity of Camau National Park in southern Vietnam. The research sample consisted of 77 fishers who belong to a growing population of shrimp fishers in the region. The results suggest that 60% would change their fishing metier, 78% would leave fishing for…

  20. Final report of the Working Group on electrical Trawling

    NARCIS (Netherlands)

    Haan, de D.; Molenaar, P.; Rijnsdorp, A.D.; Steenbergen, J.; Marlen, van B.

    2017-01-01

    WGELECTRA met three times (22–24/10/2014; 10–12/11/2015, and 17–19/01/2017) to discuss the ongoing research projects in Belgium, the Netherlands, and Germany and provide an overview of the state of the art knowledge of the ecological effects. Pulse trawls are used in the North Sea fishery for

  1. Estimation of seafloor impact from demersal trawls, seines and dredges based on gear design and dimensions

    DEFF Research Database (Denmark)

    Eigaard, Ole Ritzau; Bastardie, Francois; Breen, Michael

    a different approach using the gear itself (design and dimensions) for understanding and estimation of the physical interactions with the seafloor at the individual fishing operation level. With reference to the métier groupings of EU logbooks, we defined 17 distinct towed gear groups in European waters (11...... otter trawl groups, 3 beam trawl groups, 2 demersal seine groups, and 1 dredge group), for which we established seafloor “footprints”. The footprint of a gear was defined as the relative contribution from individual larger gear components, such as the trawl doors, sweeps and ground gear, to the total...... types based on a review of the scientific literature. For each defined gear group a vessel-size (kW or total length) – gear size (total gear width or circumference) relationship was estimated to enable the prediction of gear footprint area and sediment penetration from vessel size. The implications...

  2. Estimating seabed pressure from demersal trawls, seines, and dredges based on gear design and dimensions

    DEFF Research Database (Denmark)

    Eigaard, Ole Ritzau; Bastardie, Francois; Breen, Mike

    2016-01-01

    such as logbook data. Here, we take a different approach starting from the gear itself (design and dimensions) to estimate the physical interactions with the seabed at the level of the individual fishing operation. We defined 14 distinct towed gear groups in European waters (eight otter trawl groups, three beam...... trawl groups, two demersal seine groups, and one dredge group), for which we established gear “footprints”. The footprint of a gear is defined as the relative contribution from individual larger gear components, such as trawl doors, sweeps, and groundgear, to the total area and severity of the gear...... to enable the prediction of gear footprint area and sediment penetration from vessel size. Application of these relationships with average vessel sizes and towing speeds provided hourly swept-area estimates by métier. Scottish seining has the largest overall gear footprint of ∼1.6 km2 h−1 of which 0.08 km2...

  3. Impacts of Bottom Trawling and Litter on the Seabed in Norwegian Waters

    Directory of Open Access Journals (Sweden)

    Pål Buhl-Mortensen

    2018-02-01

    Full Text Available Bottom trawling and seabed littering are two serious threats to seabed integrity. We present an overview of the distribution of seabed litter and bottom trawling in Norwegian waters (the Norwegian Sea and the southern Barents Sea. Vessel Monitoring System (VMS records and trawl marks (TM on the seabed were used as indicators of pressure and impact of bottom trawling, respectively. Estimates of TM density and litter abundance were based on analyses of seabed videos from 1,778 locations, surveyed during 23 cruises, part of the Norwegian seabed mapping programme MAREANO. The abundance and composition of litter and the density of TM varied with depth, and type of sediments and marine landscapes. Lost or discarded fishing gear (especially lines and nets, and plastics (soft and hard plastic and rubber were the dominant types of litter. The distribution of litter reflected the distribution of fishing intensity (density of VMS records and density of TM at a regional scale, with highest abundance close to the coast and in areas with high fishing intensity, indicated from the VMS data. However, at a local scale patterns were less clear. An explanation to this could be that litter is transported with currents and accumulates in troughs, canyons, and local depressions, rather than reflecting the fisheries footprints directly. Also, deliberate dumping of discarded fishing gear is likely to occur away from good fishing grounds. Extreme abundance of litter, observed close to the coast is probably caused by such discarded fishing gear, but the contribution from aggregated populations on land is also indicated from the types of litter observed. The density of trawl marks is a good indicator of physical impact in soft sediments where the trawl gear leaves clear traces, whereas on harder substrates the impacts on organisms is probably greater than indicated by the hardly visible marks. The effects of litter on benthic communities is poorly known, but large litter

  4. RESEARCH OF REFRIGERATION SYSTEMS FAILURES IN POLISH FISHING VESSELS

    Directory of Open Access Journals (Sweden)

    Waldemar KOSTRZEWA

    2013-07-01

    Full Text Available Temperature is a basic climatic parameter deciding about the quality change of fishing products. Time, after which qualitative changes of caught fish don’t exceed established, acceptable range, is above all the temperature function. Temperature reduction by refrigeration system of the cargo hold is a basic technical method, which allows extend transport time. Failures of refrigeration systems in fishing vessels have a negative impact on the environment in relation to harmful refrigerants emission. The paper presents the statistical analysis of failures occurred in the refrigeration systems of Polish fishing vessels in 2007‐2011 years. Analysis results described in the paper can be a base to draw up guidelines, both for designers as well as operators of the marine refrigeration systems.

  5. 77 FR 60042 - Safety Zone; Research Vessel SIKULIAQ Launch, Marinette, WI

    Science.gov (United States)

    2012-10-02

    ...: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone on the Menominee River in Marinette Wisconsin. This zone is intended to restrict vessels from a portion of Menominee River during the launching of the Research vessel SIKULIAQ, on October 13th, 2012. This temporary safety...

  6. Job satisfaction in the shrimp trawl fisheries of Chennai, India

    OpenAIRE

    Bavinck, M.

    2012-01-01

    Shrimp trawling represents an important fishing métier in South India, generating high levels of employment and economic value. It is also a contested métier, ostensibly contributing to environmental degradation and social inequality. This paper investigates the job satisfaction of crew members (captains and workers) on board the shrimp trawlers of Chennai (former Madras). Research took place in 2007 and 2008 (N = 137). Results suggest a general satisfaction with being in the fishery. However...

  7. Using small meshed collecting bags on trawls to quantify trawls seabed disturbance of aquatic organisms

    DEFF Research Database (Denmark)

    Krag, Ludvig Ahm

    impact on commercial fishing grounds. In this study we develop and test small-meshed collecting bags designed to retain juvenile fish and benthic megafauna. The collecting bags are mounted in the wings and body of the trawl. The catches in the collection bags provide information of the species and size...... in the mechanical effect, such as penetration depth of the ground gear of different trawl designs. Collecting bags are also mounted to the different sections of the trawl in pairs, one to collect the organisms that pass through the trawl meshes and one to collect the population. Standard selectivity analyses...

  8. Research to sustain cases for Magnox-reactor steel pressure vessels

    International Nuclear Information System (INIS)

    Graham, W.J.

    1997-01-01

    Britain's Magnox Electric plc owns and operates six power stations, each of which has twin gas-cooled reactors of the Magnox-fuel type. The older group of four power stations has steel pressure-circuits. The reactor cores are housed within spherical, steel vessels. This article describes some of the research which is undertaken to sustain the safety cases for these steel vessels which have now been in operation for just over 30 years. (author) 2 figs., 4 refs

  9. From Deck Hand to Program Manager - 30 years with Research Vessels

    Science.gov (United States)

    Prince, J. M.

    2012-12-01

    Starting in 1980 as a Mate and Deck Hand and working my way up to Captain, Marine Superintendent, UNOLS Executive Secretary and now as an ONR Research Facilities Program Manager focused on the acquisition of two new Ocean Class Research Vessels, I have witnessed first hand the evolution of the U.S. Academic Research Fleet. The author will focus on a few key events in the evolution of the modern research fleet. As a deck hand, mate and Captain, I was involved in an early multi-disciplinary effort often using two ships working together to conduct sampling and analysis in Physical, Chemical and Biological oceanography. The VERTEX cruises led by John Martin and others used the R/V CAYUSE and R/V WECOMA extensively through out the NE Pacific Ocean conducting research that led to Dr. Martin's Iron Hypothesis. This work and that of others involving trace metal clean sampling and clean laboratories on board our ships pushed many new and demanding requirements for future vessels. As a ship scheduler and as chair of the Research Vessel Operators Committee (RVOC) I saw the increasing use of Remotely Operated Vehicles to complement the work being done with the ALVIN and other occupied submersibles. This led to scheduling challenges and changes to our safety standards, but also to many new opportunities for discoveries on the many mid-ocean ridges and hydro-thermal vent fields. More recently, Autonomous Underwater Vehicles (AUV) and Unmanned Aerial Vehicles (UAV) and aircraft have been used simultaneously with research vessels such as during a multi-PI, multi-ship program in the Monterey Bay. Communications at sea have changed dramatically in the past thirty years. No longer are we limited to reading the data from a spreadsheet over a Single Side Band radio so that the PI ashore can track the progress of a cruise and provide guidance for the next day's sampling. Full bandwidth communications are becoming the norm with the capability of streaming video from an ROV to shore or to

  10. R and D Developments. Research Programs on Irradiation Embrittlement of Reactor Vessel Steels

    International Nuclear Information System (INIS)

    Gomez Briceno, D.; Lapena, J.; Serrano, M.; Perosanz, F.

    2000-01-01

    Irradiation embrittlement of pressure vessel steels is a degradation mechanism time dependent that can lead to operational restrictions with adverse effects in the efficiency and life of a plant. For the last year, several research programs have been devoted to study thye evaluation of neutronic radiation effect on mechanical properties of pressure vessel steels. However, at the present, there is a growing interest on the development of new methodologies to optimize the surveillance program information, and the understanding of the irradiation damage mechanism. This paper give an overview of international research programs, and on the R+D activities carried out by the Structural Materials Project on irradiation embrittlement on pressure vessel steels. (Author)

  11. Concept of a nuclear powered submersible research vessel and a compact reactor

    International Nuclear Information System (INIS)

    Kusunoki, Tsuyoshi; Odano, Naoteru; Yoritsune, Tsutomu; Ishida, Toshihisa; Nishimura, Hajime; Tokunaga, Sango

    2001-07-01

    A conceptual design study of a submersible research vessel navigating in 600 m depth and a compact nuclear reactor were carried out for the expansion of the nuclear power utilization. The mission of the vessel is the research of mechanism of the climate change to predict the global environment. Through conditions of the Arctic Ocean and the sea at high latitude have significant impacts on the global environmental change, it is difficult to investigate those areas by ordinary ships because of thick ice or storm. Therefore the research vessel is mainly utilized in the Arctic Ocean and the sea at high latitude. By taking account of the research mission, the basic specifications of the vessel are decided; the total weight is 500 t, the submersible depth is 600 m, the maximum speed is 12 knots (22.2 km/h), and the number of crews is 16. Nuclear power has an advantage in supplying large power of electricity in the sea for long period. Based on the requirements, it has been decided that two sets of submersible compact reactor, SCR, which is light-weighted and of enhanced safety characteristics of supply the total electricity of 500 kW. (author)

  12. Reactor pressure vessel steels[1997 Scientific Report of the Belgian Nuclear Research Centre

    Energy Technology Data Exchange (ETDEWEB)

    Van De Velde, J.; Fabry, A.; Van Walle, E.; Chaouuadi, R.

    1998-07-01

    Research and development activities related to reactor pressure vessel steels during 1997 are reported. The objectives of activities of the Belgian Nuclear Research Centre SCK/CEN in this domain are: (1) to develop enhanced surveillance concepts by applying micromechanics and fracture-toughness tests to small specimens, and by performing damage modelling and microstructure characterization; (2) to demonstrate a methodology on a broad database; (3) to achieve regulatory acceptance and industrial use.

  13. trawl codends for blue whiting (Micromesistius

    African Journals Online (AJOL)

    Administrator

    2010-12-27

    Dec 27, 2010 ... Page 1 ... landing size; PE, polyethylene; PA, polyamide; LSMTPC, large square mesh top panel codend; SR, selection range. taceans by traditional Mediterranean trawls in seasonal .... Size structure of the population indicated retaining (thin line), escaping. (broken line) and entering (thick line) from the ...

  14. Net escapement of Antartic krill in trawls

    DEFF Research Database (Denmark)

    Krafft, B.A.; Krag, Ludvig Ahm; Herrmann, Bent

    This document describes the aims and methodology of a three year project (commenced in 2012) entitled Net Escapement of Antarctic krill in Trawls (NEAT). The study will include a morphology based mathematical modeling (FISHSELECT) of different sex and maturity groups of Antarctic krill (Euphausia...

  15. Research Vessel R/V Sikuliaq: Joining the UNOLS Fleet in 2014

    Science.gov (United States)

    Whitledge, T. E.

    2013-12-01

    The global class research vessel R/V Sikuliaq is being constructed on behalf of the NSF to support future scientific studies in high latitude waters. The 261 foot vessel will be capable of breaking 2.5 foot thick ice at 2 knots with an endurance of 45 days at sea and cruising at 11 knots. The R/V Sikuliaq has a beam of 52 feet and a draft of 18.9 feet that will carry 26 scientists and a crew of 20. Berthing accommodations are a combination of single/double rooms with one stateroom and the common areas of the vessel are designed for ADA access and accommodations. The total laboratory space (main, analytical, electronics, wet, upper, and Baltic room are 2100 square feet. The 4360 square foot working deck that is approximately 70 feet in length will accommodate 2-4 vans and multiple science operations. The vessel design strives to have the lowest possible environmental impact, including a low underwater-radiated noise signature. The science systems are prescribed to be state-of-the-art for bottom mapping, over-the-side 'hands free' gear handling, broad band communications and scientific walk-in freezer and environmental chamber. More details and photos of the construction progress are available on the website at www.sfos.uaf.edu/arrv. The vessel was launched in October 2012 and delivery to the University of Alaska Fairbanks is scheduled for November 2013. Scientific operations following testing and science sea trials are planned to start in summer of 2014. Questions about the science systems or vessel capabilities should be directed to Terry Whitledge (terry@ims.uaf.edu).

  16. Applying the TOC Project Management to Operation and Maintenance Scheduling of a Research Vessel

    Science.gov (United States)

    Manti, M. Firdausi; Fujimoto, Hideo; Chen, Lian-Yi

    Marine research vessels and their systems are major assets in the marine resources development. Since the running costs for the ship are very high, it is necessary to reduce the total cost by an efficient scheduling for operation and maintenance. To reduce project period and make it efficient, we applied TOC project management method that is a project management approach developed by Dr. Eli Goldratt. It challenges traditional approaches to project management. It will become the most important improvement in the project management since the development of PERT and critical path methodologies. As a case study, we presented the marine geology research project for the purpose of operations in addition to repair on the repairing dock projects for maintenance of vessels.

  17. An innovative methodology for the transmission of information, using Sensor Web Enablement, from ongoing research vessels.

    Science.gov (United States)

    Sorribas, Jordi; Sinquin, Jean Marc; Diviacco, Paolo; De Cauwer, Karien; Danobeitia, Juanjo; Olive, Joan; Bermudez, Luis

    2013-04-01

    Research vessels are sophisticated laboratories with complex data acquisition systems for a variety of instruments and sensors that acquire real-time information of many different parameters and disciplines. The overall data and metadata acquired commonly spread using well-established standards for data centers; however, the instruments and systems on board are not always well described and it may miss significant information. Thus, important information such as instrument calibration or operational data often does not reach to the data center. The OGC Sensor Web Enablement standards provide solutions to serve complex data along with the detailed description of the process used to obtain them. We show an innovative methodology on how to use Sensor Web Enablement standards to describe and serve information from the research vessels, the data acquisition systems used onboard, and data sets resulting from the onboard work. This methodology is designed to be used in research vessels, but also applies to data centers to avoid loss of information in between The proposed solution considers (I) the difficulty to describe a multidisciplinary and complex mobile sensor system, (II) it can be easily integrated with data acquisition systems onboard, (III) it uses the complex and incomplete typical vocabulary in marine disciplines, (IV) it provides contacts with the data and metadata services at the Data Centers, and (V) it manages the configuration changes with time of the instrument.

  18. Research Vessel R/V Sikuliaq: A New Asset For The UNOLS Fleet

    Science.gov (United States)

    Whitledge, T. E.

    2012-12-01

    The research vessel R/V Sikuliaq is currently being constructed on behalf of the NSF to support future scientific studies in high latitude waters. The 261 foot global class vessel will be capable of breaking 2.5 foot thick ice at 2 knots with an endurance of 45 days at sea and cruising at 11 knots. The R/V Sikuliaq will have a beam of 52 feet and a draft of 18.9 feet that will carry 26 scientists and a crew of 20. Berthing accommodations are a combination of single/double rooms with one stateroom and the common areas of the vessel are designed for ADA access and accommodations. The total laboratory space (main, analytical, electronics, wet, upper, and Baltic room will be 2100 square feet. The 4360 square foot working deck that is approximately 70 feet in length will accommodate 2-4 vans and multiple science operations. The vessel design strives to have the lowest possible environmental impact, including a low underwater-radiated noise signature. The science systems are prescribed to be state-of-the-art for bottom mapping, over-the-side "hands free" gear handling, broad band communications and scientific walk-in freezer and environmental chamber. More details and photos of the construction progress are available on the website at www.sfos.uaf.edu/arrv. The shipyard schedule has a launch date of October 2012 and delivery to the University of Alaska Fairbanks in July 2013. Scientific operations following trials and testing is planned to start in January 2014. Questions about the science systems or vessel capabilities should be directed to Terry Whitledge (terry@ims.uaf.edu).;

  19. 75 FR 13081 - Fisheries off West Coast States; Pacific Coast Groundfish Fishery; Trawl Rationalization Program

    Science.gov (United States)

    2010-03-18

    ... West Coast States; Pacific Coast Groundfish Fishery; Trawl Rationalization Program AGENCY: National... proposed Trawl Rationalization Program. We are interested in feedback concerning proposed regulations to... Pacific Fishery Management Council (Council) has been developing a trawl rationalization program that...

  20. 77 FR 38266 - Sea Turtle Conservation; Shrimp Trawling Requirements; Public Hearing

    Science.gov (United States)

    2012-06-27

    ... withdraw the alternative tow time restriction and require all skimmer trawls, pusher-head trawls, and wing nets (butterfly trawls) rigged for fishing to use turtle excluder devices (TEDs) in their nets, which...

  1. Safety Research Experiment Facility Project. Conceptual design report. Volume V. Reactor vessel and closure

    International Nuclear Information System (INIS)

    1975-12-01

    The Prestressed Concrete Reactor Vessel (PCRV) will serve as the primary pressure retaining structure for the Safety Research Experiment Facility (SAREF) reactor. The reactor core, control rod drive room, primary heat exchangers, and gas circulators will be located in cavities within the PCRV. The orientation of these cavities, except for the control rod drive room, will be similar to the high-temperature gas-cooled reactor (HTGR) designs that are currently proposed or under design. Due to the nature of this type of structure, all biological and radiological shielding requirements are incorporated into the basic vessel design. At the midcore plane there are three radially oriented slots that will extend from the outside surface of the PCRV to the reactor core liner. These slots will accommodate each of the fuel motion monitoring systems which will be part of the observation apparatus used with the loop experiments

  2. Construction Progress and Science Planning for the New Research Vessel R/V Sikuliaq

    Science.gov (United States)

    Whitledge, T. E.

    2011-12-01

    The research vessel R/V Sikuliaq (pronounced [see-KOO-lee-auk]) is currently being constructed on behalf of the NSF to support future scientific studies in high latitude waters. The 261 foot global class vessel will be capable of breaking 2.5 foot thick ice at 2 knots with an endurance of 45 days at sea and cruising at 11 knots. The R/V Sikuliaq will have a beam of 52 feet and a draft of 18.9 feet that will carry 26 scientists and a crew of 20. Berthing accommodations are a combination of single/double rooms with one stateroom and the common areas of the vessel are designed for ADA access and accommodations. The total laboratory space (main, analytical, electronics, wet, upper, and Baltic room will be 2100 square feet. The 4360 square foot working deck that is approximately 70 feet in length will accommodate 2-4 vans and multiple science operations. The vessel design strives to have the lowest possible environmental impact, including a low underwater-radiated noise signature. The science systems are prescribed to be state-of-the-art for bottom mapping, over-the-side "hands free" gear handling, broad band communications and scientific walk-in freezer and environmental chamber. More details and photos of the construction progress are available on the website at www.sfos.uaf.edu/arrv. The tentative shipyard schedule has a launch date of June 2012 and delivery to the University of Alaska Fairbanks in June 2013. Scientific operations following trials and testing is planned to start in January 2014. A Sikuliaq science planning workshop has been arranged for 18-19 February 2012 in Salt Lake City, UT just prior to the 2012 Ocean Sciences meeting. Interested participants should contact Terry Whitledge (terry@ims.uaf.edu).

  3. Measurement and flow visualization research of thermal hydraulic characteristics for the SFR reactor Vessel

    International Nuclear Information System (INIS)

    Cha, J. E.; Kim, S. O.; Choi, H. L.; Kim, H. B.; Kim, H. W.; Lee, S. H.

    2012-01-01

    In this report, the thermal hydraulic and flow visualization experiment was described for the KALIMER-600 water-scaled model. In order to investigate a thermal hydraulic characteristics for the SFR KALIMER-600, which has been conceptually designed in the KAERI, a water-scaled 1/10 reactor vessel model was designed and prepared through the scaling analysis during three-years research. In this research, SFR Photos system, which has inherently very complicated the internal structures, was fabricated with a transparent vessel. It was shown that a serious of thermal hydraulic test was conducted within a short period if modeled with water than sodium. Natural circulation test was successfully performed with the modeled heater assembly and heat exchanger system coupled with cooling system. The water-scaled RSV experimental facility made in this research could be used to study the USA development for the future SFR system and utilized to analyze the flow characteristics before changing a main internal part of Photos system. It could also be used to test a pool-inspection study and a sensor selection study before large scale sodium experiment. The PCV system prepared in this research could be utilized to test other TSH experiment and temperature field measurement

  4. Data Collected in 1959 by English Research Vessels at Serial and Surface Hydrographic Stations (NODC Accession 6900852)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The present volume contains data collected in 1959 by English research vessels at serial and surface hydrographic stations. The data list are preceded by a number of...

  5. CTD Data from Research Vessel New Horizon in the NE Pacific, 24 April - 01 May 2014 (NCEI Accession 0157699)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Two consecutive expeditions by research vessel New Horizon in April/May 2014 (NH1408 and NH1409) had the objective to recover and re-deploy a number of moored...

  6. CTD Data from Research Vessel New Horizon in the NE Pacific, 15-20 December 2009 (NCEI Accession 0156689)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The expedition by research vessel New Horizon from 15 to 20 December 2009 had the objective to recover and re-deploy a number of moored platforms off southern...

  7. The instrumentation of the prestressed concrete vessel with hot liner at Seibersdorf Research Centre

    International Nuclear Information System (INIS)

    Zemann, H.

    1975-11-01

    The joint project ''Prestressed Concrete Pressure Vessel with Hot Liner'' at Seibersdorf Research Centre now is in the process of testing the PCPV both in construction and operation from the safety point of view. The physical state of the PCPV (modulus of elasticity, humidity of concrete, creeping, etc.) is brought to stable conditions by ''pre-aging''. In order to control this process of stabilisation, an extensive knowledge of the concrete and an elaborated instrumentation is a necessity. This paper presents a survey about the philosophy and the realisation of the instrumentation of the PCPV and the investigations we performed to interpret the measurements. (author)

  8. Research on release rate of volatile organic compounds in typical vessel cabin

    Directory of Open Access Journals (Sweden)

    ZHANG Jinlan

    2018-02-01

    Full Text Available [Objectives] Volatile Organic Compounds (VOC should be efficiently controlled in vessel cabins to ensure the crew's health and navigation safety. As an important parameter, research on release rate of VOCs in cabins is required. [Methods] This paper develops a method to investigate this parameter of a ship's cabin based on methods used in other closed indoor environments. A typical vessel cabin is sampled with Tenax TA tubes and analyzed by Automated Thermal Desorption-Gas Chromatography-Mass Spectrometry (ATD-GC/MS. The lumped mode is used and the release rate of Benzene, Toluene, Ethylbenzene and Xylene (BTEX, the typical representatives of VOCs, is obtained both in closed and ventilated conditions. [Results] The results show that the content of xylene and Total Volatile Organic Compounds (TVOC exceed the indoor environment standards in ventilated conditions. The BTEX release rate is similar in both conditions except for the benzene. [Conclusions] This research builds a method to measure the release rate of VOCs, providing references for pollution character evaluation and ventilation and purification system design.

  9. DIAGNOSIS OF SHRIMP TRAWLING IN THE STATE OF PERNAMBUCO, BRAZIL

    Directory of Open Access Journals (Sweden)

    Carlos Eduardo Rangel Andrade

    2016-09-01

    Full Text Available With a technical approach, this diagnosis aims to fill a gap in the overview of the activity, considering its technical aspects that manage the fishing effort of shrimping of Penambuco. From October 2013 to August 2014, the fishing grounds were identified used in this activity, as well as the fishing method, the number of boats and fishermen acting, type of boat and gears used. Analyses were performed with the major communities operating in this fishery (Recife, Jaboatão dos Guararapes, Barra de Sirinhaém and São Jose da Coroa Grande. The analyzes of the catch were tested using one-way ANOVA (α 5%. They observed two traditional types: the beach seining and trawing. It was cataloged about 50 vessels in the activity, with approximately 100 fishermen. They are caught mainly three types of shrimp: pink (Farfantepenaeus spp., Seabob (Xiphopenaeus kroyeri and white (Lithopenaeus schmitii. Statistical data concentrated in the metropolitan area of Recife and Barra de Sirinhaém. There seems to be a direct relationship rainfall with shrimp production because with increased rainfall, there is a higher volume of landing fishery. Barra de Sirinhaém is the main area used in the State. Keywords: ‘mangote’; trawling fishing; pink shrimp; Farfantepenaeus spp.

  10. Research towards ultrasonic systems to assist in-vessel manipulations in liquid metal cooled reactors

    International Nuclear Information System (INIS)

    Dierckx, Marc; Van-Dyck, Dries

    2013-06-01

    We describe the state of the art of the research towards ultrasonic measurement methods for use in lead-bismuth cooled liquid metal reactors. Our current research activities are highly focused on specific tasks in the MYRRHA system, which is a fast spectrum research reactor cooled with the eutectic mixture of lead and bismuth (LBE) and is conceived as an accelerator driven system capable of operating in both sub-critical and critical mode. As liquid metal is opaque to light, normal visual feedback during fuel manipulations in the reactor vessel is not available and must therefore be replaced by a system that is not hindered by the opacity of the coolant. In this respect ultrasonic measurement techniques have been proposed and even developed in the past for operation in sodium cooled reactors. To our knowledge, no such systems have ever been deployed in lead based reactors and we are the first to have a research program in this direction as will be detailed in this paper. We give an overview of the acoustic properties of LBE and compare them with the properties of sodium and water to theoretically show the feasibility of ultrasonic systems operating in LBE. In the second part of the paper we discuss the results of the validation experiments in water and LBE. A typical scene is ultrasonically probed by a mechanical scanning system while the signals are processed to render a 3D visualization on a computer screen. It will become clear that mechanical scanning is capable of producing acceptable images but that it is a time consuming process that is not fit to solve the initial task to providing feedback during manipulations in the reactor vessel. That is why we propose to use several dedicated ultrasonic systems each adapted to a specific task and capable to provide real-time feedback of the ongoing manipulations, as is detailed in the third and final part of the paper. (authors)

  11. Mini neutron monitor measurements at the Neumayer III station and on the German research vessel Polarstern

    Science.gov (United States)

    Heber, B.; Galsdorf, D.; Herbst, K.; Gieseler, J.; Labrenz, J.; Schwerdt, C.; Walter, M.; Benadé, G.; Fuchs, R.; Krüger, H.; Moraal, H.

    2015-08-01

    Neutron monitors (NMs) are ground-based devices to measure the variation of cosmic ray intensities, and although being reliable they have two disadvantages: their size as well as their weight. As consequence, [1] suggested the development of a portable, and thus much smaller and lighter, calibration neutron monitor that can be carried to any existing station around the world [see 2; 3]. But this mini neutron monitor, moreover, can also be installed as an autonomous station at any location that provides ’’office” conditions such as a) temperatures within the range of around 0 to less than 40 degree C as well as b) internet and c) power supply. However, the best location is when the material above the NM is minimized. In 2011 a mini Neutron Monitor was installed at the Neumayer III station in Antarctica as well as the German research vessel Polarstern, providing scientific data since January 2014 and October 2012, respectively. The Polarstern, which is in the possession of the Federal Republic of Germany represented by the Ministry of Education and Research and operated by the Alfred Wegener Institute, Helmholtz Centre for Polar and Marine Research and managed by the shipping company Laeisz, was specially designed for working in the polar seas and is currently one of the most sophisticated polar research vessels worldwide. It spends almost 310 days a year at sea usually being located in the waters of Antarctica between November and March while spending the northern summer months in Arctic waters. Therefore, the vessel scans the rigidity range below the atmospheric threshold and above 10 GV twice a year. In contrast to spacecraft measurements NM data are influenced by variations of the geomagnetic field as well as the atmospheric conditions. Thus, in order to interpret the data a detailed knowledge of the instrument sensitivity with geomagnetic latitude (rigidity) and atmospheric pressure is essential. In order to determine the atmospheric response data from the

  12. Mini neutron monitor measurements at the Neumayer III station and on the German research vessel Polarstern

    International Nuclear Information System (INIS)

    Heber, B; Galsdorf, D; Herbst, K; Gieseler, J; Labrenz, J; Schwerdt, C; Walter, M; Benadé, G; Fuchs, R; Krüger, H; Moraal, H

    2015-01-01

    Neutron monitors (NMs) are ground-based devices to measure the variation of cosmic ray intensities, and although being reliable they have two disadvantages: their size as well as their weight. As consequence, [1] suggested the development of a portable, and thus much smaller and lighter, calibration neutron monitor that can be carried to any existing station around the world [see 2; 3]. But this mini neutron monitor, moreover, can also be installed as an autonomous station at any location that provides ’’office” conditions such as a) temperatures within the range of around 0 to less than 40 degree C as well as b) internet and c) power supply. However, the best location is when the material above the NM is minimized. In 2011 a mini Neutron Monitor was installed at the Neumayer III station in Antarctica as well as the German research vessel Polarstern, providing scientific data since January 2014 and October 2012, respectively. The Polarstern, which is in the possession of the Federal Republic of Germany represented by the Ministry of Education and Research and operated by the Alfred Wegener Institute, Helmholtz Centre for Polar and Marine Research and managed by the shipping company Laeisz, was specially designed for working in the polar seas and is currently one of the most sophisticated polar research vessels worldwide. It spends almost 310 days a year at sea usually being located in the waters of Antarctica between November and March while spending the northern summer months in Arctic waters. Therefore, the vessel scans the rigidity range below the atmospheric threshold and above 10 GV twice a year. In contrast to spacecraft measurements NM data are influenced by variations of the geomagnetic field as well as the atmospheric conditions. Thus, in order to interpret the data a detailed knowledge of the instrument sensitivity with geomagnetic latitude (rigidity) and atmospheric pressure is essential. In order to determine the atmospheric response data from the

  13. Neutron monitor measurements on the German research vessel Polarstern. First results

    Energy Technology Data Exchange (ETDEWEB)

    Heber, B. [Insititut fuer Experimentelle und Angewandte Physik, Christian-Albrechts-Universitaet zu Kiel (Germany); Schwerdt, C.; Walter, M. [Deutsches Elektronen-Synchrotron DESY, D-15738 Zeuthen (Germany); Bernade, G.; Fuchs, R.; Krueger, H.; Moraal, H. [Center for Space Research, North-West University, Potchefstroom 2520 (South Africa)

    2014-07-01

    Cosmic-ray particles provide a unique opportunity to probe the dynamic conditions in the highly variable heliosphere. The longest continuous measurements of galactic cosmic rays come from cosmogenic isotopes and from neutron monitors located at different location on Earth. Understanding the effects of energetic particles in and on the atmosphere and the environment of Earth must address their transport to Earth and their interactions with the Earth's atmosphere, including their filtering by the terrestrial magnetosphere. Since neutron monitors are integral detectors of secondary cosmic rays produced in the atmosphere, a single neutron monitor can only derive the energy spectra of the particles impinging on the Earth during latitudinal surveys. A portable neutron monitor was built at the North-West University, South Africa, and was installed on the German research vessel Polarstern. Such latitude surveys have been done before, but this vessel is better suited for this purpose than previous platforms because it traverses all the locations with geomagnetic cutoff rigidities from <<1 GV to 15 GV at least twice per year. In this contribution we present first results from the measurement campaigns.

  14. Improvement of shipborne sky radiometer and its demonstration aboard the Antarctic research vessel Shirase

    Directory of Open Access Journals (Sweden)

    Noriaki Tanaka

    2014-11-01

    Full Text Available The sun-tracking performance of a shipborne sky radiometer was improved to attain accurate aerosol optical thickness (AOT from direct solar measurements on a pitching and rolling vessel. Improvements were made in the accuracy of sun-pointing measurements, field-of-view expansion, sun-tracking speed, and measurement method. Radiometric measurements of direct solar and sky brightness distribution were performed using the shipborne sky radiometer onboard the Antarctic research vessel (R/V Shirase during JARE-51 (2009-2010 and JARE-52 (2010-2011. The temporal variation of signal intensity measured by the radiometer under cloudless conditions was smooth, demonstrating that the radiometer could measure direct sunlight onboard the R/V. AOT at 500 nm ranged from 0.01 to 0.34, and values over Southeast Asia and over the western Pacific Ocean in spring were higher than those over other regions. The Angstrom exponent ranged from -0.06 to 2.00, and values over Southeast Asia and off the coast near Sydney were the highest. The improved shipborne sky radiometer will contribute to a good understanding of the nature of aerosols over the ocean.

  15. Reactor pressure vessel integrity research at the Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Corwin, W.R.; Pennell, W.E.; Pace, J.V.

    1995-01-01

    Maintaining the integrity of the reactor pressure vessel (RPV) in a light-water-cooled nuclear power plant is crucial in preventing and controlling severe accidents that have the potential for major contamination release. The RPV is the only key safety-related component of the plant for which a duplicate or redundant backup system does not exist. It is therefore imperative to understand and be able to predict the integrity inherent in the RPV. For this reason, the U.S. Nuclear Regulatory Commission has established the related research programs at ORNL described herein to provide for the development and confirmation of the methods used for: (1) establishing the irradiation exposure conditions within the RPV in the Embrittlement Data Base and Dosimetry Evaluation Program, (2) assessing the effects of irradiation on the RPV materials in the Heavy-Section Steel Irradiation Program, and (3) developing overall structural and fracture analyses of RPVs in the Heavy-Section Steel Technology Program

  16. A miniature research vessel: A small-scale ocean-exploration demonstration of geophysical methods

    Science.gov (United States)

    Howell, S. M.; Boston, B.; Sleeper, J. D.; Cameron, M. E.; Togia, H.; Anderson, A.; Sigurdardottir, T. D.; Tree, J. P.

    2015-12-01

    Graduate student members of the University of Hawaii Geophysical Society have designed a small-scale model research vessel (R/V) that uses sonar to create 3D maps of a model seafloor in real-time. A pilot project was presented to the public at the School of Ocean and Earth Science and Technology's (SOEST) Biennial Open House weekend in 2013 and, with financial support from the Society of Exploration Geophysicists and National Science Foundation, was developed into a full exhibit for the same event in 2015. Nearly 8,000 people attended the two-day event, including children and teachers from Hawaii's schools, home school students, community groups, families, and science enthusiasts. Our exhibit demonstrates real-time sonar mapping of a cardboard volcano using a toy size research vessel on a programmable 2-dimensional model ship track suspended above a model seafloor. Ship waypoints were wirelessly sent from a Windows Surface tablet to a large-touchscreen PC that controlled the exhibit. Sound wave travel times were recorded using an ultrasonic emitter/receiver attached to an Arduino microcontroller platform and streamed through a USB connection to the control PC running MatLab, where a 3D model was updated as the ship collected data. Our exhibit demonstrates the practical use of complicated concepts, like wave physics, survey design, and data processing in a way that the youngest elementary students are able to understand. It provides an accessible avenue to learn about sonar mapping, and could easily be adapted to talk about bat and marine mammal echolocation by replacing the model ship and volcano. The exhibit received an overwhelmingly positive response from attendees and incited discussions that covered a broad range of earth science topics.

  17. Reflex impairment, physiological stress, and discard mortality of European plaice Pleuronectes platessa in an otter trawl fishery

    DEFF Research Database (Denmark)

    Methling, Caroline; Skov, Peter Vilhelm; Madsen, Niels

    2017-01-01

    whether reflex impairment can predict short-term mortality in commercially trawled European plaice upon landing and after air exposure of up to 90 min. Sub-lethal stress was assessed by a suite of physiological variables. Over a 10-day period, mortality was monitored for a total of 199 plaice following...... trawl and air exposure of varying duration, and for 50 control fish scored for reflex impairment on board the vessel. Mortality was only observed in fish exposed to air for >60 min, and averaged 11.1% (95% CI = 7.1–16.3%). Reflex impairment was found to be a significant (P ... of mortality in a generalized linear model, excluding other initially included variables by using a stepwise method. Plasma cortisol, haematocrit, and plasma osmolality all indicated a profound and increasing level of stress with air exposure, accompanied by a near depletion of muscle phosphocreatine...

  18. Optimisation of trawl energy efficiency under fishing effort constraint

    OpenAIRE

    Priour, Daniel; Khaled, Ramez

    2009-01-01

    Trawls energy efficiency is greatly affected by the drag, as well as by the swept area. The drag results in an increase of the energy consumption and the sweeping influences the catch. Methods of optimisation of the trawl design have been developed in order to reduce the volume of carburant per kg of caught fish and consequently the drag per swept area of the trawl. Based on a finite element method model for flexible netting structures, the tool modifies step by step a reference design. For e...

  19. NEFSC 2011 Fall Bottom Trawl Survey (HB1105, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  20. NEFSC 2002 Fall Bottom Trawl Survey (AL0210, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  1. NEFSC 2002 Winter Bottom Trawl Survey (AL0203, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  2. NEFSC 2008 Fall Bottom Trawl Survey (AL0803, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  3. NEFSC 2004 Winter Bottom Trawl Survey (AL0401, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  4. NEFSC 2005 Fall Bottom Trawl Survey (AL0508, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  5. NEFSC 2003 Spring Bottom Trawl Survey (DE0303, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  6. trawl bycatch in the fishing grounds of Bus

    African Journals Online (AJOL)

    ajl yemi

    2011-11-30

    . Biol. 86: 1455-1462. Watson RA, Dredge MLC, Mayer DG (1990). Spatial and seasonal variation in demersal trawl fauna associated with a prawn fishery on the CentralGreat Barrier Reef, Australia. Aust. J. Mar. Freshw. Res.

  7. NEFSC 2011 Spring Bottom Trawl Survey (HB1102, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  8. NEFSC 2007 Bottom Trawl Survey Calibration (HB0711, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  9. Corpus Christi EFH Trawling Effects 2001-2002

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — We compared sediments and benthos of two adjacent zones of the middle Texas coast, one of which was closed to shrimp trawling for 7 months. Findings indicated that...

  10. Gear Selectivity of a Longfin Squid Bottom Trawl

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Loligo pealeii (longfin inshore squid) co-occurs with Atlantic butterfish (Peprilus triacanthus) throughout the year and discarding in the L. pealeii bottom trawl...

  11. NEFSC 2008 Spring Bottom Trawl Survey (AL0801, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  12. NEFSC 2008 Spring Bottom Trawl Survey (HB0802, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  13. NEFSC 2015 Fall Bottom Trawl Survey (HB1506, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  14. NEFSC 1998 Fall Bottom Trawl Survey (AL9811, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  15. NEFSC 2009 Spring Bottom Trawl Survey (HB0901, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  16. NEFSC 2012 Spring Bottom Trawl Survey (HB1201, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  17. NEFSC 2015 Spring Bottom Trawl Survey (HB1501, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  18. NEFSC 2004 Spring Bottom Trawl Survey (AL0403, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  19. NEFSC 1999 Fall Bottom Trawl Survey (AL9911, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  20. NEFSC 2005 Fall Bottom Trawl Survey (AL0509, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  1. NEFSC 2012 Fall Bottom Trawl Survey (HB1206, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  2. NEFSC 2013 Fall Bottom Trawl Survey (HB1304, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  3. NEFSC 2010 Spring Bottom Trawl Survey (HB1002, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  4. NEFSC 2016 Fall Bottom Trawl Survey (HB1604, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  5. NEFSC 2000 Fall Bottom Trawl Survey (Al0006, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  6. NEFSC 2000 Fall Bottom Trawl Survey (AL0007, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  7. NEFSC 2005 Winter Bottom Trawl Survey (AL0502, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  8. NEFSC 2009 Fall Bottom Trawl Survey (HB0905, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  9. NEFSC 2004 Fall Bottom Trawl Survey (AL0409, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  10. NEFSC 2013 Spring Bottom Trawl Survey (HB1301, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  11. NEFSC 2014 Fall Bottom Trawl Survey (HB1405, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  12. NEFSC 2014 Spring Bottom Trawl Survey (HB1401, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  13. NEFSC 2007 Bottom Trawl Survey Calibration (HB0710, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  14. NEFSC 2005 Spring Bottom Trawl Survey (AL0504, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  15. NEFSC 2016 Spring Bottom Trawl Survey (HB1601, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  16. NEFSC 2008 Fall Bottom Trawl Survey (HB0807, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  17. West Coast Groundfish Bottom Trawl Survey Data - Annual West Coast time series groundfish trawl data collection survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Members of the Fishery Resource Analysis and Monitoring Division Survey Team conduct an annual West Coast Groundfish Bottom Trawl Survey from May - October each...

  18. Crafting glass vessels: current research on the ancient glass collections in the Freer Gallery of Art, Washington, D.C.

    Science.gov (United States)

    Nagel, Alexander; McCarthy, Blythe; Bowe, Stacy

    Our knowledge of glass production in ancient Egypt has been well augmented by the publication of recently excavated materials and glass workshops, but also by more recent materials analysis, and experiments of modern glass-makers attempting to reconstruct the production process of thin-walled coreformed glass vessels. From the mounting of a prefabricated core to the final glass product our understanding of this profession has much improved. The small but well preserved glass collection of the Freer Gallery of Art in Washington, D.C. is a valid tool for examining and studying the technology and production of ancient Egyptian core formed glass vessels. Charles Lang Freer (1854-1919) acquired most of the material from Giovanni Dattari in Cairo in 1909. Previously the glass had received only limited discussion, suggesting that most of these vessels were produced in the 18th Dynasty in the 15th and 14th centuries BCE, while others date from the Hellenistic period and later. In an ongoing project we conducted computed radiography in conjunction with qualitative x-ray fluorescence analysis on a selected group of vessels to understand further aspects of the ancient production process. This paper will provide an overview of our recent research and present our data-gathering process and preliminary results. How can the examinations of core formed glass vessels in the Freer Gallery contribute to our understanding of ancient glass production and technology? By focusing on new ways of looking at old assumptions using the Freer Gallery glass collections, we hope to increase understanding of the challenges of the production process of core-vessel technology as represented by these vessels.

  19. Bycatch of crustacean and fish bottom trawl fisheries from southern Portugal (Algarve

    Directory of Open Access Journals (Sweden)

    Maria Esmeralda Costa

    2008-12-01

    Full Text Available As part of two research projects for analysing bycatch and discards, we quantified catch composition, catch rates, bycatch and discards in two important commercial bottom trawl fisheries (crustacean and fish trawls off the southern coast of Portugal (Algarve. Stratified sampling by onboard observers took place from February 1999 to March 2001 and data were collected from 165 tows during 52 fishing trips. Commercial target species included crustaceans: blue and red shrimp (Aristeus antennatus, deep-water rose shrimp (Parapenaeus longirostris, Norway lobster (Nephrops norvegicus; and fishes: seabreams (Diplodus spp. and Pagellus spp., horse mackerels (Trachurus spp. and European hake (Merluccius merluccius. The trawl fisheries are characterised by considerable amounts of bycatch: 59.5% and 80.4% of the overall total catch for crustacean and fish trawlers respectively. A total of 255 species were identified, which belonged to 15 classes of organisms (137 vertebrates, 112 invertebrates and 6 algae. Crustacean trawlers had higher bycatch biodiversity. Bony fish (45.6% and 37.8% followed by crustaceans (14.6% and 11.5% were the dominant bycatch components of both crustacean and fish trawlers respectively. The influence of a number of factors (e.g. depth, fishing gear, tow duration and season on bycatch and discards is discussed.

  20. QFD-ANP Approach for the Conceptual Design of Research Vessels: A Case Study

    Science.gov (United States)

    Venkata Subbaiah, Kambagowni; Yeshwanth Sai, Koneru; Suresh, Challa

    2016-10-01

    Conceptual design is a subset of concept art wherein a new idea of product is created instead of a visual representation which would directly be used in a final product. The purpose is to understand the needs of conceptual design which are being used in engineering designs and to clarify the current conceptual design practice. Quality function deployment (QFD) is a customer oriented design approach for developing new or improved products and services to enhance customer satisfaction. House of quality (HOQ) has been traditionally used as planning tool of QFD which translates customer requirements (CRs) into design requirements (DRs). Factor analysis is carried out in order to reduce the CR portions of HOQ. The analytical hierarchical process is employed to obtain the priority ratings of CR's which are used in constructing HOQ. This paper mainly discusses about the conceptual design of an oceanographic research vessel using analytical network process (ANP) technique. Finally the QFD-ANP integrated methodology helps to establish the importance ratings of DRs.

  1. The influence of fire exposure on austenitic stainless steel for pressure vessel fitness-for-service assessment: Experimental research

    Science.gov (United States)

    Li, Bo; Shu, Wenhua; Zuo, Yantian

    2017-04-01

    The austenitic stainless steels are widely applied to pressure vessel manufacturing. The fire accident risk exists in almost all the industrial chemical plants. It is necessary to make safety evaluation on the chemical equipment including pressure vessels after fire. Therefore, the present research was conducted on the influences of fire exposure testing under different thermal conditions on the mechanical performance evolution of S30408 austenitic stainless steel for pressure vessel equipment. The metallurgical analysis described typical appearances in micro-structure observed in the material suffered by fire exposure. Moreover, the quantitative degradation of mechanical properties was investigated. The material thermal degradation mechanism and fitness-for-service assessment process of fire damage were further discussed.

  2. Overview of research trends and problems on Cr-Mo low alloy steels for pressure vessel

    International Nuclear Information System (INIS)

    Chi, Byung Ha; Kim, Jeong Tae

    2000-01-01

    Cr-Mo low alloy steels have been used for a long time for pressure vessel due to its excellent corrosion resistance, high temperature strength and toughness. The paper reviewed the latest trends on material development and some problems on Cr-Mo low alloy steel for pressure vessel, such as elevated temperature strength, hardenability, synergetic effect between temper and hydrogen embrittlement, hydrogen attack and hydrogen induced disbonding of overlay weld-cladding

  3. Research and development of spent fuel shipping casks and the criteria for seagoing vessel carrying casks

    International Nuclear Information System (INIS)

    Aoki, S.; Ando, Y.

    1977-01-01

    Considering that the transportation of spent fuel will increase rapidly and extensively in the near future, Japanese Atomic Energy Committee enacted ''Technical Standard for Transportation of Radioactive Materials'' based on ''IAEA Regulation for the Safe Transport of Radioactive Materials 1973 Revised Edition''. Coping with the recommendation of AEC, Atomic Energy Bureau in Science and Technology Agency and other authorities concerned started to review the former ordinances for transportation of radioactive materials and to consolidate a unified system of relevant laws and standards. On the other hand, Atomic Energy Bureau has invested in research and development since ten years ago in order to obtain the data for design and licensing work of spent fuel shipping casks. In those studies some different scale models of a prototype of 80 t in weight have been used to make clear the scale effect at the drop, pucture and fire tests, which are one of the features of Japanese research and development. And also the immersion test in high pressure water up to about 500 bars is now carried out to investigate the integrity of cask body and sealing structure to prevent leakage of radioactive contents to the ambient when the cask falls into deep sea. In Japan, depending on the site conditions of nuclear plants, almost all transportations of unirradiated and spent fuels are done on the sea. Therefore, in order to secure the safety of transportation, the design criteria of the seagoing vessels for exclusive transportation of spent fuel shipping casks, namely full load shipping, has been enacted, which aims to make minimum the probability of sinking at collison, stranding and other unforeseen accidents at sea and also to restrain radiation exposure of the crew as low as possible

  4. Interactions between a Trawl fishery and spatial closures for biodiversity conservation in the Great Barrier Reef World Heritage Area, Australia.

    Directory of Open Access Journals (Sweden)

    Alana Grech

    Full Text Available BACKGROUND: The Queensland East Coast Otter Trawl Fishery (ECOTF for penaeid shrimp fishes within Australia's Great Barrier Reef World Heritage Area (GBRWHA. The past decade has seen the implementation of conservation and fisheries management strategies to reduce the impact of the ECOTF on the seabed and improve biodiversity conservation. New information from electronic vessel location monitoring systems (VMS provides an opportunity to review the interactions between the ECOTF and spatial closures for biodiversity conservation. METHODOLOGY AND RESULTS: We used fishing metrics and spatial information on the distribution of closures and modelled VMS data in a geographical information system (GIS to assess change in effort of the trawl fishery from 2001-2009 and to quantify the exposure of 70 reef, non-reef and deep water bioregions to trawl fishing. The number of trawlers and the number of days fished almost halved between 2001 and 2009 and new spatial closures introduced in 2004 reduced the area zoned available for trawl fishing by 33%. However, we found that there was only a relatively minor change in the spatial footprint of the fishery as a result of new spatial closures. Non-reef bioregions benefited the most from new spatial closures followed by deep and reef bioregions. CONCLUSIONS/SIGNIFICANCE: Although the catch of non target species remains an issue of concern for fisheries management, the small spatial footprint of the ECOTF relative to the size of the GBRWHA means that the impact on benthic habitats is likely to be negligible. The decline in effort as a result of fishing industry structural adjustment, increasing variable costs and business decisions of fishers is likely to continue a trend to fish only in the most productive areas. This will provide protection for most benthic habitats without any further legislative or management intervention.

  5. 78 FR 3848 - Fisheries Off West Coast States; Pacific Coast Groundfish Fishery; Trawl Rationalization Program...

    Science.gov (United States)

    2013-01-17

    ... Rationalization Program; Emergency Rule Extension AGENCY: National Marine Fisheries Service (NMFS), National... Coast Groundfish Fishery Trawl Rationalization Program (program) regulations. This emergency rule... trawl rationalization program. Background on this rule was provided in the proposed rule, published on...

  6. AFSC/ABL: Frederick Sound Echo-integrated Trawl Survey, 2001 to 2004

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The acoustic trawl database for Frederick Sounds echo-trawl survey was conducted from 2001 to 2004. The surveys were conducted throughout most of the southern part...

  7. Impact of bottom trawling on sediment characteristics - A study along inshore waters off Veraval coast, India

    Digital Repository Service at National Institute of Oceanography (India)

    Bhagirathan, U.; Meenakumari, B.; Jayalakshmy, K.V.; Panda, S.K.; Madhu, V.R.; Vaghela, D.T.

    The present communication is a study on the impact of bottom trawling on the sediment characteristics along Veraval coast, which is the largest trawler port of India. Experimental bottom trawling was conducted from MFV Sagarkripa at five transects...

  8. AFSC/ABL: Lynn Canal Echo-Integrated Trawl Surveys, 2001-2004

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The acoustic trawl database for Lynn Canals echo-trawl survey was conducted from 2001 to 2004 throughout southern Lynn Canal in southeast Alaska. Acoustic surveys...

  9. Effects of trawl selectivity and genetic parameters on fish body length under long-term trawling

    Science.gov (United States)

    Yu, Yang; Sun, Peng; Cui, He; Sheng, Huaxiang; Zhao, Fenfang; Tang, Yanli; Chen, Zelin

    2015-10-01

    Long-term fishing pressure affects the biological characteristics of exploited fish stocks. The biological characteristics of hairtail ( Trichiurus lepturus) in the East China Sea are unable to recover because of long-term trawling. Fishing induces evolutionary effects on the fish's biological characteristics. Evidence of these changes includes small size at age, a shift to earlier age structure, and early maturation. Natural and artificial selection usually affect the fish's life history. Selection can induce different chances of reproduction, and individual fish can give a different genetic contribution to the next generation. In this study, analysis of time-dependent probability of significance and test of sensitivity were used to explore the effects of fish exploitation rate, mesh size, and heritability with long-term trawling. Results showed that fishing parameters were important drivers to exploited fish population. However, genetic traits altered by fishing were slow, and the changes in biological characteristics were weaker than those caused by fishing selection. Exploitation rate and mesh size exhibited similar evolutionary trend tendency under long-term fishing. The time-dependent probability of significance trend showed a gradual growth and tended to be stable. Therefore, the direction of fishing-induced evolution and successful management of fish species require considerable attention to contribute to sustainable fisheries in China.

  10. Reactor pressure vessel structural integrity research in the US Nuclear Regulatory Commission HSST and HSSI Programs

    International Nuclear Information System (INIS)

    Pennell, W.E.; Corwin, W.R.

    1994-01-01

    This report discusses development on the technology used to assess the safety of irradiation-embrittled nuclear reactor pressure vessels containing flaws. Fracture mechanics tests on reactor pressure vessel steel have shown that local brittle zones do not significantly degrade the material fracture toughness, constraint relaxation at the crack tip of shallow surface flaws results in increased fracture toughness, and biaxial loading reduces but does not eliminate the shallow-flaw fracture toughness elevation. Experimental irradiation investigations have shown that the irradiation-induced shift in Charpy V-notch versus temperature behavior may not be adequate to conservatively assess fracture toughness shifts due to embrittlement and the wide global variations of initial chemistry and fracture properties of a nominally uniform material within a pressure vessel may confound accurate integrity assessments that require baseline properties

  11. Vessel Operating Units (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains data for vessels that are greater than five net tons and have a current US Coast Guard documentation number. Beginning in1979, the NMFS...

  12. 77 FR 66577 - Fisheries Off West Coast States; Pacific Coast Groundfish Fishery; Trawl Rationalization Program...

    Science.gov (United States)

    2012-11-06

    ...-XC165 Fisheries Off West Coast States; Pacific Coast Groundfish Fishery; Trawl Rationalization Program... implemented as part of the trawl rationalization program. FOR FURTHER INFORMATION CONTACT: Jamie Goen, phone..., NMFS implemented a trawl rationalization program, a catch share program, for the Pacific coast...

  13. 50 CFR 660.337 - Trawl rationalization program - data collection requirements.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Trawl rationalization program - data... COAST STATES West Coast Groundfish Fisheries § 660.337 Trawl rationalization program - data collection... guarantee that they will qualify for quota share under a future trawl rationalization program. The following...

  14. Impact and distribution of bottom trawl fishing on mud-bottom communities in the Kattegat

    DEFF Research Database (Denmark)

    Pommer, Christina Dahl; Olesen, Michael; Hansen, Jorgen L. S.

    2016-01-01

    The Kattegat in the inner Danish waters has been trawled for at least 80 yr, but so far only few attempts have been made to quantify the trawl effort, its spatial distribution and its potential ecological impact on the benthic fauna. GIS-analyses of VMS-data from trawling in the Kattegat by both ...

  15. Neuroimaging standards for research into small vessel disease and its contribution to ageing and neurodegeneration

    NARCIS (Netherlands)

    Wardlaw, J.M.; Smith, E.E.; Biessels, G.J.; Cordonnier, C.; Fazekas, F.; Frayne, R.; Lindley, R.I.; O'Brien, J. T.; Barkhof, F.; Benavente, O.R.; Black, S.E.; Brayne, C.; Breteler, M.; Chabriat, H.; deCarli, C.; de Leeuw, F.E.; Doubal, F.; Duering, M.; Fox, N.C.; Greenberg, S.; Hachinski, V.; Kilimann, I.; Mok, V.; van Oostenbrugge, R.; Pantoni, L.; Speck, O.; Stephan, B.C.M.; Teipel, S.; Viswanathan, A.; Werring, D.; Chen, C.; Smith, C.; van Buchem, M.; Norrving, B.; Gorelick, P.B.; Dichgans, M.

    2013-01-01

    Cerebral small vessel disease (SVD) is a common accompaniment of ageing. Features seen on neuroimaging include recent small subcortical infarcts, lacunes, white matter hyperintensities, perivascular spaces, microbleeds, and brain atrophy. SVD can present as a stroke or cognitive decline, or can have

  16. Mock-up test of remote controlled dismantling apparatus for large-sized vessels (contract research)

    Energy Technology Data Exchange (ETDEWEB)

    Myodo, Masato; Miyajima, Kazutoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Okane, Shogo [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment

    2001-03-01

    The Remote dismantling apparatus, which is equipped with multi-units for functioning of washing, cutting, collection of cut pieces and so on, has been constructed to dismantle the large-sized vessels in the JAERI's Reprocessing Test Facility (JRTF). The apparatus has five-axis movement capability and its operation is performed remotely. The mock-up tests were performed to evaluate the applicability of the apparatus to actual dismantling activities by using the mock-ups of LV-3 and LV-5 in the facility. It was confirmed that each unit was satisfactory functioned by remote operation. Efficient procedures for dismantling the large-sized vessel was studied and various date was obtained in the mock-up tests. This apparatus was found to be applicable for the actual dismantling activity in JRTF. (author)

  17. A group of painted vessels from Singidunum: A contribution to the researches on painted ceramics

    Directory of Open Access Journals (Sweden)

    Nikolić Snežana

    2005-01-01

    Full Text Available About 20 vessels, made of fine clay fired in whitish tones (10YR 8/2, 10YR 8/2-3, 5Y 8/1, with the polished surface ornamented with painting in fading brown, originate from Singidunum. In comparison with analogous material from Donja (Lower Panonia and Dalmatia, the importance of these vessels is to be found in the fact that they were excavated from settlement horizons dated to the second half of the 3rd and early 4th century. Based on the shapes and technological features of ceramics from Lower Panonia and Dalmatia, which have been published, as well as on the observations of the finds from Singidunum, it is to be assumed that they were the output of the same workshop which not only had a small scale of production but also a meager scope of shapes, meaning goblets i.e. cups as favorable form.

  18. Mock-up test of remote controlled dismantling apparatus for large-sized vessels (contract research)

    International Nuclear Information System (INIS)

    Myodo, Masato; Miyajima, Kazutoshi; Okane, Shogo

    2001-03-01

    The Remote dismantling apparatus, which is equipped with multi-units for functioning of washing, cutting, collection of cut pieces and so on, has been constructed to dismantle the large-sized vessels in the JAERI's Reprocessing Test Facility (JRTF). The apparatus has five-axis movement capability and its operation is performed remotely. The mock-up tests were performed to evaluate the applicability of the apparatus to actual dismantling activities by using the mock-ups of LV-3 and LV-5 in the facility. It was confirmed that each unit was satisfactory functioned by remote operation. Efficient procedures for dismantling the large-sized vessel was studied and various date was obtained in the mock-up tests. This apparatus was found to be applicable for the actual dismantling activity in JRTF. (author)

  19. Advance of investigation of irradiation embrittlement mechanism of nuclear reactor pressure vessel steels. History and future of irradiation embrittlement researches

    International Nuclear Information System (INIS)

    Ishino, Shiori

    2007-01-01

    The nuclear reactor pressure vessel is the most important component of LWR plants required to be safe. This paper describes contents of the title consisting of four chapters. The first chapter states the general theory of irradiation effects, irradiation embrittlement and decreasing of toughness, and some kinds of pressure vessel steels. The second chapter explains history of irradiation embrittlement investigations and the advance of research methods for experiments and calculation. The third chapter contains information of inner structure of irradiated materials and development of prediction equations, recent information of embrittlement mechanism and mechanism guided prediction method, USA model and Central Research Institute of Electric Power Industry (CRIEPI) model. The fourth chapter states recent problems from viewpoints of experimental and analytical approaches. Comparison of standards of LWR pressure vessel steels between Japan and USA, relation between the density of number of cluster and the copper content, effect of flux on clustering of copper atoms, and CRIEPI's way of approaching the prediction method are illustrated. (S.Y.)

  20. Species selectivity in different sized topless trawl designs: Does size matter?

    DEFF Research Database (Denmark)

    Krag, Ludvig Ahm; Herrmann, Bent; Karlsen, Junita Diana

    2015-01-01

    -specific quotas. The toplesstrawl design was developed to improve species-specific selectivity in such fisheries. In a topless trawl,the foot rope is located more forward than the headline to allow fish to escape upwards, whereas theheadline is located in front in traditional trawl designs. In this study we...... Atlantic, topless trawls have been introducedas legal cod-selective trawl designs. However, this study demonstrates that identical gear modificationsmade to similar trawls of different sizes and used in the same fishery can lead to different results....

  1. Job satisfaction in the shrimp trawl fisheries of Chennai, India

    NARCIS (Netherlands)

    Bavinck, M.

    2012-01-01

    Shrimp trawling represents an important fishing métier in South India, generating high levels of employment and economic value. It is also a contested métier, ostensibly contributing to environmental degradation and social inequality. This paper investigates the job satisfaction of crew members

  2. Job Satisfaction in the Shrimp Trawl Fisheries of Chennai, India

    Science.gov (United States)

    Bavinck, Maarten

    2012-01-01

    Shrimp trawling represents an important fishing metier in South India, generating high levels of employment and economic value. It is also a contested metier, ostensibly contributing to environmental degradation and social inequality. This paper investigates the job satisfaction of crew members (captains and workers) on board the shrimp trawlers…

  3. The influence of the trawl mouth opening size and net colour on catch efficiency during sampling of early fish stages

    Czech Academy of Sciences Publication Activity Database

    Jůza, T.; Čech, Martin; Kubečka, Jan; Vašek, Mojmír; Peterka, Jiří; Matěna, Josef

    2010-01-01

    Roč. 105, č. 3 (2010), s. 125-133 ISSN 0165-7836 R&D Projects: GA ČR(CZ) GP206/09/P266; GA AV ČR(CZ) 1QS600170504 Institutional research plan: CEZ:AV0Z60170517 Keywords : trawl efficiency * fry density * perch Subject RIV: EH - Ecology, Behaviour Impact factor: 1.656, year: 2010

  4. Estimation on the Flow Phenomena and the Pressure Loss for the Inlet Part of a Research Reactor Vessel

    International Nuclear Information System (INIS)

    Seo, Kyoung Woo; Oh, Jae Min; Seo, Jae Kwang; Yoon, Ju Hyeon; Lee, Doo Jeong

    2009-01-01

    For a research reactor, a conceptual primary cooling system (PCS) was designed for an adequate cooling to the reactor core. The developed primary cooling circuit consisted of decay tanks, pumps, heat exchangers, vacuum breakers, some isolation and check valves, connection piping, and instruments. The main function of the primary cooling pumps (PCPs) of the PCS was to circulate the reactor coolant through the fuel core and the heat exchangers during a normal operation. The head according to the design flow rate which was determined by the thermal hydraulic design analysis for the core should be estimated to design the PCPs in the fluid system. The pressure loss in the PCS can be calculated by the dimensional analysis of the pipe flow and the head loss coefficient of the components. However, it is insufficient to estimate the pressure loss for 3-dimensional flow phenomena such as the flow path in the reactor with the theoretical dimensional analysis based on experimental data. The purpose of this research is to evaluate the pressure loss of the part of a research reactor vessel. For evaluating the pressure loss, the commercially available CFD computer model, FLUENT, was employed. First, for validating the application of FLUENT to the pressure loss, a simple case was calculated and compared with the Idelchik empirical correlation. Secondly, several cases for the inlet part of a research reactor vessel were estimated by a FLUENT 3- dimensional calculation

  5. CTD and Water Sample Data from Research Vessel Robert Gordon Sproul in the NE Pacific, 24 October 2013 (NCEI Accession 0157082)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The expedition by research vessel Robert Gordon Sproul from 23 to 25 October 2013 had the objective to recover a broken mooring from the CORC project (Consortium on...

  6. CTD and Water Sample Data from Research Vessel New Horizon in the NE Pacific, 19-22 September 2008 (NCEI Accession 0156931)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The expedition by research vessel New Horizon from 19 to 22 September 2008 had the objective to deploy a number of moored platforms for the CORC project (Consortium...

  7. Processed CTD and Water Sample Data from Research Vessel Ocean Starr in the NE Pacific, Aug. 31 and Sept. 01, 2012 (NCEI Accession 0156932)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The expedition by research vessel Ocean Starr on Aug. 31 and Sept. 01, 2012 had the objective to recover and re-deploy a number of moored platforms from the CORC...

  8. Processed CTD and Water Sample Data from Research Vessel Roger Revelle, Expedition RR1214, in the NE Pacific in November 2012 (NCEI Accession 0156228)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Expedition RR1214 by research vessel Roger Revelle was primarily a transit from French Polynesia to the US mainland. However, a small scientific program was...

  9. Improving the size- and species selectivity of cod (Gadus morhua) in demersal mixed-species trawl fisheries

    DEFF Research Database (Denmark)

    Krag, Ludvig Ahm

    have been published in scientific journals and Paper 3 has been submitted to Fisheries Research. This review will take a broader perspective and will examine the capturing process, which is the basis for the selection process. Moreover, it discusses the existing methods and knowledge in the fields...... different species, including cod, are caught together. Demersal trawling is the predominant fishing method in Denmark, as measured by both catch value and volume. Demersal trawls also account for the highest discard rates of juvenile fish, including cod. The focus of this work was on improving......, and openings. The results show that the morphology-based simulations of size selectivity of cod can be used to explain a large part of both the within-haul and the between-haul variations previously reported from sea trials. The method can further predict the selection parameters (L50 and SR) for cod...

  10. Research and development on in-service inspection system for reactor vessel of FBR's

    International Nuclear Information System (INIS)

    Rindo, Hiroshi; Mitabe, Noriaki; Ara, Kuniaki; Nagai, Keiichi; Otaka, Masahiko

    1993-01-01

    In-Service Inspection (ISI) is required for main components and piping of FBRs. Visual test and volumetric examination of the reactor vessel (RV) from the outer surface are to be performed under severe conditions such as limited space, high temperature and high gamma dose rate during the reactor shutdown. Therefore, ISI should be performed by using a remote operation system, and the ISI system should be very compact. PNC has been developing the ISI system to apply to the RV inspection. Verification and performance tests of ISI system were carried out by use of the RV test model. This paper describes the system structure, system verification tests including operation and controlling the inspection robot, the functions of the visual test and the volumetric examination under the high temperature

  11. Development of in-vessel type control rod drive mechanism for a innovative small reactor (Contract research)

    Energy Technology Data Exchange (ETDEWEB)

    Yoritsune, Tsutomu; Ishida, Toshihisa [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2003-03-01

    Although the control rod drive mechanism of an existing large scale light water reactor is generally installed outside the reactor vessel, an in-vessel type control rod drive mechanism (INV-CRDM) is installed inside the reactor vessel. The INV-CRDM contributes to compactness and simplicity of the reactor system, and it can eliminate the possibility of a rod ejection accident. Therefore, INV-CRDM is an important technology adopted in an innovative small reactor. Japan Atomic Energy Research Institute (JAERI) has developed this type of CRDM driven by an electric motor, which can work under high temperature and high pressure water for the advanced marine reactor. On the basis of this research result, a driving motor coil and a bearing were developed to be used under the high temperature steam, severe condition for an innovative small reactor. About the driving motor, we manufactured the driving motor available for high temperature steam and carried out performance test under room temperature atmosphere to confirm the electric characteristic and coolability of the driving coil. With these test results and the past test results under high temperature water, we analyzed and evaluated the electric performance and coolability of the driving coil under high temperature steam. Concerning bearing, we manufactured the test pieces using some candidate material for material characteristic test and carried out the rolling wear test under high temperature steam to select the material. Consequently, we confirmed that performance of the driving coil for the advanced type driving motor, is enough to be used under high temperature steam. And, we evaluated the performance of the bearing and selected the material of the bearing, which can be used under high temperature steam. From these results, we have obtained the prospect that the INV-CRDM can be used for an innovative small reactor under steam atmosphere could be developed. (author)

  12. Determination of effective effort on hake Merluccius merluccius in a Mediterranean trawl fishery

    Directory of Open Access Journals (Sweden)

    Francisco Alemany

    2003-12-01

    Full Text Available The direct control of fishing effort as a management tool is of special interest in the Mediterranean, where the lack of effective international management systems and the high diversity of the catches significantly increases the complexity of implementing TAC´s as an indirect control of fishing effort. However, its enforcement should be based on the precise knowledge of the relationship between the fishing effort and its corresponding fishing mortality. In this sense, the general aim of this study was to develop an approach for analysing this relationship. In order to estimate the annual effective fishing effort on hake, a relational data base including daily landings by vessel and species of trawl fleet based on the port of Palma, Mallorca island (western Mediterranean during the period 1983-1991 was built. Fishing mortalities were available from VPA. Fishing effort and fishing mortality were split by subfleets or métiers which were identified by cluster analysis. Significant linear relationships between the two parameters were obtained when fishing effort was considered as the number of days in which hake catch was higher than 10 kg multiplied by GRT of correspondent vessels. These CPUE values are mainly obtained when trawlers operate in the muddy bottoms of the shelf and on the upper slope, where hake populations are mostly distributed. On the other hand, no clear trends in catchability by métier were found during the period analysed.

  13. Research on removal technologies of fuel debris and in-vessel structures using laser light (1). Research plan and research activities on FY2012

    International Nuclear Information System (INIS)

    Muramatsu, Toshiharu; Yamada, Tomonori; Hanari, Toshihide; Takebe, Toshihiko; Matsunaga, Yukihiro

    2013-08-01

    In decommissioning works of the Fukushima Daiichi nuclear power plants, it is required that fuel debris solidifying mixed materials of fuels and in-vessel structures should be removed. The fuel debris is considered to have characteristics, such as indefinite shapes, porous bodies, multi-compositions, higher hardness, etc. from the knowledge in decommissioning process of the Three Mile Island nuclear power plant. Laser lights are characterized by higher power density, local processability, remote controllability, etc. and can be performed thermal cutting and crushing-up for various materials which does not depend on fracture toughness. This report describes a research program and research activities in FY2012 aiming at developing removal system of fuel debris by the use of laser lights. Main results obtained from research activities in FY2012 are as follows: (1) Improvements of experimental infrastructures. A beam switching unit for an existing fiber laser system, an x-y-z tri-axes robot system to investigate remote control performances, and a particle image velocimetry (PIV) system for quantitation of assist gas flow characteristics were introduced to the experimental laboratory of our Applied Laser Technology Institute in Tsuruga. (2) Laser cutting performances for thick metal plates. To quantify laser cutting performance for thick metal plates of in-vessel structures, after the evaluation of the relationship between the kerf depth and amount of laser irradiation energy to the metal test piece, we evaluated for heat transfer behavior due to temperature measurement of thick metal plate on the laser cutting process. It is suggested that the heat diffusion into the cutting object can affect the heat input efficiency of the laser irradiation energy to kerf front. On the viewpoint of suppressing this thermal diffusion, it was found that it is important in improving the laser cutting performance to increase the ejection of molten metal by the assist gas, and to optimize

  14. Response margins investigation of piping dynamic analyses using the independent support motion method and PVRC [Pressure Vessel Research Committee] damping

    International Nuclear Information System (INIS)

    Bezler, P.; Wang, Y.K.; Reich, M.

    1988-03-01

    An evaluation of Independent Support Motion (ISM) response spectrum methods of analysis coupled with the Pressure Vessel Research Committee (PVRC) recommendation for damping, to compute the dynamic component of the seismic response of piping systems, was completed. Response estimates for five piping/structural systems were developed using fourteen variants of the ISM response spectrum method, the Uniform Support Motions response spectrum method and the ISM time history analysis method, all based on the PVRC recommendations for damping. The ISM/PVRC calculational procedures were found to exhibit orderly characteristics with levels of conservatism comparable to those obtained with the ISM/uniform damping procedures. Using the ISM/PVRC response spectrum method with absolute combination between group contributions provided consistently conservative results while using the ISM/PVRC response spectrum method with square root sum of squares combination between group contributions provided estimates of response which were deemed to be acceptable

  15. Pressure vessel design manual

    CERN Document Server

    Moss, Dennis R

    2013-01-01

    Pressure vessels are closed containers designed to hold gases or liquids at a pressure substantially different from the ambient pressure. They have a variety of applications in industry, including in oil refineries, nuclear reactors, vehicle airbrake reservoirs, and more. The pressure differential with such vessels is dangerous, and due to the risk of accident and fatality around their use, the design, manufacture, operation and inspection of pressure vessels is regulated by engineering authorities and guided by legal codes and standards. Pressure Vessel Design Manual is a solutions-focused guide to the many problems and technical challenges involved in the design of pressure vessels to match stringent standards and codes. It brings together otherwise scattered information and explanations into one easy-to-use resource to minimize research and take readers from problem to solution in the most direct manner possible. * Covers almost all problems that a working pressure vessel designer can expect to face, with ...

  16. US Navy Transfers Research Vessel to Philippine Navy > U.S. Pacific Command

    Science.gov (United States)

    , 2016 EMAIL PRINT Photos 1 of 1 SAN DIEGO (April 27, 2016) - Vice Adm. Nora Tyson, left, commander of Philippines oceanographic research and study capabilities. SAN DIEGO (April 27, 2016) - Vice Adm. Nora Tyson part in that relationship," said Vice Adm. Nora Tyson, commander, U.S. 3rd Fleet. "Today, we

  17. Historical summary of the heavy-section steel technology program and some related activities in light-water reactor pressure vessel safety research

    International Nuclear Information System (INIS)

    Whitman, G.D.

    1986-03-01

    The accomplishments of the Heavy-Section Steel Technology Program and other programs having a close relationship to the development of information used in the assessment of light-water reactor pressure vessel integrity are reviewed. The early Pressure Vessel Research Committee planning, the principals contributing to program formulation, the role of the US Atomic Energy Commission, and the developments under the US Nuclear Regulatory Commission sponsorship are identified. The need for major research and development accomplishments in fracture mechanics, heavy-section steel procurement, materials properties, irradiation effects, fatigue crack growth, and structural testing are summarized. The impact of program results on regulatory issues and the development of data used in the preparation of codes, standards, and guides are discussed. Continuing activities and recommendations for future research and development in support of pressure vessel integrity assessments are presented

  18. Roadmap for Nondestructive Evaluation of Reactor Pressure Vessel Research and Development by the Light Water Reactor Sustainability Program

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Cyrus M [ORNL; Nanstad, Randy K [ORNL; Clayton, Dwight A [ORNL; Matlack, Katie [Georgia Institute of Technology; Ramuhalli, Pradeep [Pacific Northwest National Laboratory (PNNL); Light, Glenn [Southwest Research Institute, San Antonio

    2012-09-01

    The Department of Energy s (DOE) Light Water Reactor Sustainability (LWRS) Program is a five year effort which works to develop the fundamental scientific basis to understand, predict, and measure changes in materials and systems, structure, and components as they age in environments associated with continued long-term operations of existing commercial nuclear power reactors. This year, the Materials Aging and Degradation (MAaD) Pathway of this program has placed emphasis on emerging Non-Destructive Evaluation (NDE) methods which support these objectives. DOE funded Research and Development (R&D) on emerging NDE techniques to support commercial nuclear reactor sustainability is expected to begin next year. This summer, the MAaD Pathway invited subject matter experts to participate in a series of workshops which developed the basis for the research plan of these DOE R&D NDE activities. This document presents the results of one of these workshops which are the DOE LWRS NDE R&D Roadmap for Reactor Pressure Vessels (RPV). These workshops made a substantial effort to coordinate the DOE NDE R&D with that already underway or planned by the Electric Power Research Institute (EPRI) and the Nuclear Regulatory Commission (NRC) through their representation at these workshops.

  19. Similar effects of bottom trawling and natural disturbance on composition and function of benthic communities across habitats

    NARCIS (Netherlands)

    Denderen, van Daniel; Bolam, Stefan G.; Hiddink, Jan Geert; Jennings, Simon; Kenny, Andrew; Rijnsdorp, Adriaan D.; Kooten, Van Tobias

    2015-01-01

    Bottom trawl fishing has widespread impacts on benthic habitats and communities. The benthic response to trawling seems to be smaller or absent in areas exposed to high natural disturbance, leading to the hypothesis that natural and trawl disturbance affect benthic communities in a similar way.

  20. Bycatch in 36 and 40 mm PA Turkish twin rigged beam trawl codends

    African Journals Online (AJOL)

    The Turkish twin rigged beam trawl which has two identical nets rigged side by side on the same beam targets mainly the Parapenaeus longirostris, although some bycatch fish species have also become target species. Thus, landings of the shrimp beam trawling fleet also include some commercially valuable fishes.

  1. Stable isotopes reveal the effect of trawl fisheries on the diet of commercially exploited species.

    Science.gov (United States)

    Hinz, Hilmar; Moranta, Joan; Balestrini, Stephen; Sciberras, Marija; Pantin, Julia R; Monnington, James; Zalewski, Alex; Kaiser, Michel J; Sköld, Mattias; Jonsson, Patrik; Bastardie, Francois; Hiddink, Jan Geert

    2017-07-24

    Bottom trawling can change food availability for benthivorous demersal species by (i) changing benthic prey composition through physical seabed impacts and (ii) by removing overall benthic consumer biomass increasing the net availability of benthic prey for remaining individuals. Thus trawling may both negatively and positively influence the quantity and quality of food available. Using δ 13 C and δ 15 N we investigated potential diet changes of three commercially exploited species across trawling gradients in the Kattegat (plaice, dab and Norway lobster (Nephrops)) and the Irish Sea (Nephrops). In the Kattegat, trawling affected primarily the biomass of benthic consumers, lowering competition. Nephrops showed significant positive relationships for δ 13 C and a domed relationship for δ 15 N with trawling. In the Irish Sea, intense trawling had a negative effect on benthic prey. δ 13 C and δ 15 N thus showed the inverse relationships to those observed in the Kattegat. Plaice from the Kattegat, showed a significant relationship with trawling intensity for δ 13 C, but not for δ 15 N. No relationship was found for dab. Changes of δ 13 C and δ 15 N correlated with changes in condition of species. The results show that the removal of demersal competitors and benthos by trawling can change the diets of commercial species, ultimately affecting their body condition.

  2. 78 FR 40435 - Proposed Information Collection; Comment Request; Gulf of Alaska Trawl Fishery, Rationalization...

    Science.gov (United States)

    2013-07-05

    ... Collection; Comment Request; Gulf of Alaska Trawl Fishery, Rationalization Sociocultural Study AGENCY... management actions requiring equivalent information. Fisheries rationalization programs have an impact on... the implementation of a new, yet to be defined, rationalization program for the Gulf of Alaska trawl...

  3. 78 FR 75268 - Fisheries Off West Coast States; Pacific Coast Groundfish Fishery; Trawl Rationalization Program...

    Science.gov (United States)

    2013-12-11

    ... Rationalization Program; Cost Recovery AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and... recovery program for the Pacific coast groundfish trawl rationalization program, as required by the...). Allocations to the limited entry trawl fleet for certain species were developed through a parallel process...

  4. 50 CFR 660.333 - Open access non-groundfish trawl fishery-management measures.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Open access non-groundfish trawl fishery... COAST STATES West Coast Groundfish-Open Access Fisheries § 660.333 Open access non-groundfish trawl... the open access trip limit table, Table 3 (South) of this subpart. Trip limits for groundfish retained...

  5. FLEXSELECT: counter-herding device to reduce bycatch in crustacean trawl fisheries

    DEFF Research Database (Denmark)

    Melli, Valentina; Karlsen, Junita Diana; Feekings, Jordan P.

    2018-01-01

    FLEXSELECT is a simple counter-herding device which aims at reducing the bycatch of fish by scaring them away from the trawl path without affecting the catches of the target species. FLEXSELECT was tested in the Norway lobster (Nephrops norvegicus) directed trawl fishery, as this includes bycatch...

  6. Environmental DNA from seawater samples correlate with trawl catches of Subarctic, deepwater fishes

    DEFF Research Database (Denmark)

    Thomsen, Philip Francis; Møller, Peter Rask; Sigsgaard, Eva Egelyng

    2016-01-01

    such as bottom trawling, and on official reporting of global catches, which can be unreliable. Thus, there is need for alternative and non-invasive techniques for qualitative and quantitative oceanic fish surveys. Here we report environmental DNA (eDNA) metabarcoding of seawater samples from continental slope...... depths in Southwest Greenland. We collected seawater samples at depths of 188-918 m and compared seawater eDNA to catch data from trawling. We used Illumina sequencing of PCR products to demonstrate that eDNA reads show equivalence to fishing catch data obtained from trawling. Twenty-six families were...... found with both trawling and eDNA, while three families were found only with eDNA and two families were found only with trawling. Key commercial fish species for Greenland were the most abundant species in both eDNA reads and biomass catch, and interpolation of eDNA abundances between sampling sites...

  7. Bayesian spatio-temporal discard model in a demersal trawl fishery

    Science.gov (United States)

    Grazia Pennino, M.; Muñoz, Facundo; Conesa, David; López-Quílez, Antonio; Bellido, José M.

    2014-07-01

    Spatial management of discards has recently been proposed as a useful tool for the protection of juveniles, by reducing discard rates and can be used as a buffer against management errors and recruitment failure. In this study Bayesian hierarchical spatial models have been used to analyze about 440 trawl fishing operations of two different metiers, sampled between 2009 and 2012, in order to improve our understanding of factors that influence the quantity of discards and to identify their spatio-temporal distribution in the study area. Our analysis showed that the relative importance of each variable was different for each metier, with a few similarities. In particular, the random vessel effect and seasonal variability were identified as main driving variables for both metiers. Predictive maps of the abundance of discards and maps of the posterior mean of the spatial component show several hot spots with high discard concentration for each metier. We argue how the seasonal/spatial effects, and the knowledge about the factors influential to discarding, could potentially be exploited as potential mitigation measures for future fisheries management strategies. However, misidentification of hotspots and uncertain predictions can culminate in inappropriate mitigation practices which can sometimes be irreversible. The proposed Bayesian spatial method overcomes these issues, since it offers a unified approach which allows the incorporation of spatial random-effect terms, spatial correlation of the variables and the uncertainty of the parameters in the modeling process, resulting in a better quantification of the uncertainty and accurate predictions.

  8. Fish bycatch of the laulao catfish Brachyplatystoma vaillantii (Valenciennes, 1840 trawl fishery in the Amazon Estuary

    Directory of Open Access Journals (Sweden)

    Erica Antunes Jimenez

    2013-06-01

    Full Text Available This study aimed to analyse the composition and seasonal variation in the fish bycatch of the Brachyplatystoma vaillantii trawl fishery in the Amazon Estuary in 2009 by monitoring the trips of 48 vessels. The bycatch represented 29% of the catches, totalling 22,228 specimens and 52 taxa, distributed in 22 families (the principal families were Ariidae, Pimelodidae, and Sciaenidae. Brachyplatystoma rousseauxii, Plagioscion squamosissimus, and Sciades herzbergii together contributed 69% of the bycatch and were considered consistent bycatch species. Although a higher proportion of bycatch was captured during the rainy season, the seasonal difference was not significant. A multidimensional scaling (MDS ordination analysis and an analysis of similarity (ANOSIM indicated that the species composition of the bycatch was similar across the seasons. However, larger numbers of B. rousseauxii and P. squamosissimus were captured during the rainy season, whereas S. herzbergii predominated during the dry season. The marine migrants and estuarine species guilds showed the greatest richness, whereas freshwater migrants were the most numerous. Among the feeding guilds, the zoobenthivores were the most diverse, whereas the piscivores were the most abundant. The results indicate that fishing pressure primarily affects small- (20-30 cm and medium-sized (30-50 cm individuals, although the catch of P. squamosissimus was composed primarily of adults. However, the catches of both B. rousseauxii and B. vaillantii were composed primarily of juveniles.

  9. Selective haddock (Melanogrammus aeglefinus) trawling: Avoiding cod (Gadus morhua) bycatch

    DEFF Research Database (Denmark)

    Krag, Ludvig Ahm; Holst, René; Madsen, Niels

    2010-01-01

    The critical condition of the North Sea cod stocks has resulted in restrictions on not only cod, but also haddock and other species that are caught together with cod. Thus full exploitation of the haddock stock is unachievable unless cod can be excluded from the haddock catch. We designed a selec...... dependent: smaller cod escaped the trawl in greater numbers than did larger individuals. Whiting, saithe. lemon sole, and plaice were included in the analysis. (C) 2009 Elsevier B.V. All rights reserved....

  10. User's manual and analysis methodology of probabilistic fracture mechanics analysis code PASCAL Ver.2 for reactor pressure vessel (Contract research)

    International Nuclear Information System (INIS)

    Osakabe, Kazuya; Onizawa, Kunio; Shibata, Katsuyuki; Kato, Daisuke

    2006-09-01

    As a part of the aging structural integrity research for LWR components, the probabilistic fracture mechanics (PFM) analysis code PASCAL (PFM Analysis of Structural Components in Aging LWR) has been developed in JAEA. This code evaluates the conditional probabilities of crack initiation and fracture of a reactor pressure vessel (RPV) under transient conditions such as pressurized thermal shock (PTS). The development of the code has been aimed to improve the accuracy and reliability of analysis by introducing new analysis methodologies and algorithms considering the recent development in the fracture mechanics and computer performance. PASCAL Ver.1 has functions of optimized sampling in the stratified Monte Carlo simulation, elastic-plastic fracture criterion of the R6 method, crack growth analysis models for a semi-elliptical crack, recovery of fracture toughness due to thermal annealing and so on. Since then, under the contract between the Ministry of Economy, Trading and Industry of Japan and JAEA, we have continued to develop and introduce new functions into PASCAL Ver.2 such as the evaluation method for an embedded crack, K I database for a semi-elliptical crack considering stress discontinuity at the base/cladding interface, PTS transient database, and others. A generalized analysis method is proposed on the basis of the development of PASCAL Ver.2 and results of sensitivity analyses. Graphical user interface (GUI) including a generalized method as default values has been also developed for PASCAL Ver.2. This report provides the user's manual and theoretical background of PASCAL Ver.2. (author)

  11. Development of outcome measures for large-vessel vasculitis for use in clinical trials: opportunities, challenges, and research agenda.

    Science.gov (United States)

    Direskeneli, Haner; Aydin, Sibel Z; Kermani, Tanaz A; Matteson, Eric L; Boers, Maarten; Herlyn, Karen; Luqmani, Raashid A; Neogi, Tuhina; Seo, Philip; Suppiah, Ravi; Tomasson, Gunnar; Merkel, Peter A

    2011-07-01

    Giant cell (GCA) and Takayasu's arteritis (TAK) are 2 forms of large-vessel vasculitis (LVV) that involve the aorta and its major branches. GCA has a predilection for the cranial branches, while TAK tends to affect the extracranial branches. Both disorders may also cause nonspecific constitutional symptoms. Although some clinical features are more common in one or the other disorder and the ages of initial presentation differ substantially, there is enough clinical and histopathologic overlap between these disorders that some investigators suggest GCA and TAK may be 2 processes within the spectrum of a single disease. There have been few randomized therapeutic trials completed in GCA, and none in TAK. The lack of therapeutic trials in LVV is only partially explained by the rarity of these diseases. It is likely that the lack of well validated outcome measures for LVV and uncertainties regarding trial design contribute to the paucity of trials for these diseases. An initiative to develop a core set of outcome measures for use in clinical trials of LVV was launched by the international OMERACT Vasculitis Working Group in 2009 and subsequently endorsed by the OMERACT community at the OMERACT 10 meeting. Aims of this initiative include: (1) to review the literature and existing data related to outcome assessments in LVV; (2) to obtain the opinion of experts and patients on disease content; and (3) to formulate a research agenda to facilitate a more data-based approach to outcomes development.

  12. Testing a polarimetric cloud imager aboard research vessel Polarstern: comparison of color-based and polarimetric cloud detection algorithms.

    Science.gov (United States)

    Barta, András; Horváth, Gábor; Horváth, Ákos; Egri, Ádám; Blahó, Miklós; Barta, Pál; Bumke, Karl; Macke, Andreas

    2015-02-10

    Cloud cover estimation is an important part of routine meteorological observations. Cloudiness measurements are used in climate model evaluation, nowcasting solar radiation, parameterizing the fluctuations of sea surface insolation, and building energy transfer models of the atmosphere. Currently, the most widespread ground-based method to measure cloudiness is based on analyzing the unpolarized intensity and color distribution of the sky obtained by digital cameras. As a new approach, we propose that cloud detection can be aided by the additional use of skylight polarization measured by 180° field-of-view imaging polarimetry. In the fall of 2010, we tested such a novel polarimetric cloud detector aboard the research vessel Polarstern during expedition ANT-XXVII/1. One of our goals was to test the durability of the measurement hardware under the extreme conditions of a trans-Atlantic cruise. Here, we describe the instrument and compare the results of several different cloud detection algorithms, some conventional and some newly developed. We also discuss the weaknesses of our design and its possible improvements. The comparison with cloud detection algorithms developed for traditional nonpolarimetric full-sky imagers allowed us to evaluate the added value of polarimetric quantities. We found that (1) neural-network-based algorithms perform the best among the investigated schemes and (2) global information (the mean and variance of intensity), nonoptical information (e.g., sun-view geometry), and polarimetric information (e.g., the degree of polarization) improve the accuracy of cloud detection, albeit slightly.

  13. Final report for the 'Melt-Vessel Interactions' Project. European Union R and TD Program 4th Framework. MVI project final research report

    Energy Technology Data Exchange (ETDEWEB)

    Sehgal, B.R.; Dinh, T.N.; Nourgaliev, R.R.; Bui, V.A.; Green, J.; Kolb, G.; Karbojian, A.; Theerthan, S.A.; Gubaidulline, A. [Royal Inst. of Tech., Stockholm (Sweden). Div. of Nuclear Power Safety; Helle, M.; Kymaelaeinen, O.; Tuomisto, H. [IVO Power Engineering Ltd., Vantaa (Finland); Bonnet, J.M.; Rouge, S.; Narcoux, M.; Liegeois, A. [CEA - Grenoble (France); Turland, B.D.; Dobson, G.P. [AEA Technology plc, Dorchester (United Kingdom); Siccama, A. [ECN Nuclear Research, Petten (Netherlands); Ikonen, K. [VTT Energy, Helsinki (Finland); Parozzi, F. [ENEL - SRI/PAM/GRA, Segrate, MI (Italy); Kolev, N. [Siemens AG, Erlangen (Germany); Caira, M. [Univ. of Roma (Italy)

    1999-04-01

    The Melt Vessel Interaction (MVI) project is concerned with the consequences of the interactions that a core melt, generated during a postulated severe accident in a light water reactor, may have with the pressure vessel. In particular, the issues concerned with the failure of the vessel bottom head are the focus of the research. The specific objectives of the project are to obtain data and develop validated models, which could be applied to prototypic plants, and accident conditions, for resolution of issues related to the melt vessel interactions. The project work has been performed by nine partners having varied responsibility. The work included a large number of experiments, with simulant materials, whose observations and results are employed, respectively, to understand the physical mechanisms and to develop validated models. Applications to the prototypic geometry and conditions have also been performed. This report is volume 1 of the Final Report for the Project, in which a summary of the progress achieved in the experimental program is provided. We have, however, included some aspects of the modeling activities. Volume 2 of the Final report describes the progress achieved in the modeling program. The progress achieved in the experimental and modeling parts of the Project has led to the resolution of some of the issues of melt vessel interaction. Considerable progress was also achieved towards resolution of the remaining issues.

  14. Final report for the 'Melt-Vessel Interactions' Project. European Union R and TD Program 4th Framework. MVI project final research report

    International Nuclear Information System (INIS)

    Sehgal, B.R.; Dinh, T.N.; Nourgaliev, R.R.; Bui, V.A.; Green, J.; Kolb, G.; Karbojian, A.; Theerthan, S.A.; Gubaidulline, A.; Bonnet, J.M.; Rouge, S.; Narcoux, M.; Liegeois, A.; Turland, B.D.; Dobson, G.P.; Siccama, A.; Ikonen, K.; Parozzi, F.; Kolev, N.; Caira, M.

    1999-04-01

    The Melt Vessel Interaction (MVI) project is concerned with the consequences of the interactions that a core melt, generated during a postulated severe accident in a light water reactor, may have with the pressure vessel. In particular, the issues concerned with the failure of the vessel bottom head are the focus of the research. The specific objectives of the project are to obtain data and develop validated models, which could be applied to prototypic plants, and accident conditions, for resolution of issues related to the melt vessel interactions. The project work has been performed by nine partners having varied responsibility. The work included a large number of experiments, with simulant materials, whose observations and results are employed, respectively, to understand the physical mechanisms and to develop validated models. Applications to the prototypic geometry and conditions have also been performed. This report is volume 1 of the Final Report for the Project, in which a summary of the progress achieved in the experimental program is provided. We have, however, included some aspects of the modeling activities. Volume 2 of the Final report describes the progress achieved in the modeling program. The progress achieved in the experimental and modeling parts of the Project has led to the resolution of some of the issues of melt vessel interaction. Considerable progress was also achieved towards resolution of the remaining issues

  15. A dataset from bottom trawl survey around Taiwan

    Directory of Open Access Journals (Sweden)

    Kwang-tsao Shao

    2012-05-01

    Full Text Available Bottom trawl fishery is one of the most important coastal fisheries in Taiwan both in production and economic values. However, its annual production started to decline due to overfishing since the 1980s. Its bycatch problem also damages the fishery resource seriously. Thus, the government banned the bottom fishery within 3 nautical miles along the shoreline in 1989. To evaluate the effectiveness of this policy, a four year survey was conducted from 2000–2003, in the waters around Taiwan and Penghu (Pescadore Islands, one region each year respectively. All fish specimens collected from trawling were brought back to lab for identification, individual number count and body weight measurement. These raw data have been integrated and established in Taiwan Fish Database (http://fishdb.sinica.edu.tw. They have also been published through TaiBIF (http://taibif.tw, FishBase and GBIF (website see below. This dataset contains 631 fish species and 3,529 records, making it the most complete demersal fish fauna and their temporal and spatial distributional data on the soft marine habitat in Taiwan.

  16. Proceedings of the 3rd international conference on heat exchangers, boilers and pressure vessels (HEB-97). Vol.1 (Research Papers)

    International Nuclear Information System (INIS)

    1997-04-01

    This conference was held on 5-6 Apr 1997 in Alexandria. the specialists discussed heat exchangers, boilers and pressure vessels. more than 200 papers were presented in the meetings. it contains of data, figures and tables

  17. Proceedings of the 3rd international conference on heat exchangers, boilers and pressure vessels (HEB-97). Vol.1 (Research Papers)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    This conference was held on 5-6 Apr 1997 in Alexandria. the specialists discussed heat exchangers, boilers and pressure vessels. more than 200 papers were presented in the meetings. it contains of data, figures and tables.

  18. The use of at‐sea‐sampling data to dissociate environmental variability in Norway lobster (Nephrops norvegicus) catches to improve resource exploitation efficiency within the Skagerrak/Kattegat trawl fishery

    DEFF Research Database (Denmark)

    Feekings, Jordan P.; Christensen, Asbjørn; Jonsson, Patrik

    2015-01-01

    Research into the influence of environmental variables on the behaviour of Norway lobster (Nephrops norvegicus), and hence catch rates, dates back to the 1960s (e.g., Höglund and Dybern, Diurnal and seasonal variations in the catch‐composition of Nephrops norvegicus (L.) at the Swedish west coast...... on commercial trawl catches of Nephrops norvegicus (L.). ICES J. Mar. Sci. 58:1318). Here, we aimed to dissociate environmental variability in Norway lobster catches to improve resource exploitation efficiency within the Skagerrak and Kattegat trawl fisheries by utilising data collected as part of an extensive...

  19. Heat dissipation research on the water-cooling channel of HL-2M in-vessel coils

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, J., E-mail: jiangjiaming@swip.ac.cn; Liu, Y.; Chen, Q.; Ji, X.Q.

    2017-04-15

    Highlights: • The joule heat of in-vessel coils is very difficult to dissipate inside HL-2M vacuum vessel. • Heat dissipation model of the coil includes the joule heat model, the heat conduction model and the heat transfer model. • The CFD analysis has been done for the coil-water cooling, with comparison with the date of theoretical analysis and experiment. • The result shows water-cooling channel is good for the joule heat transfer and taken away. - Abstract: HL-2M in-vessel coils are positioned in high vacuum circumstance, and they will generate joule heat when they carry 15 kA electrical current, but joule heat is very difficult to dissipate in vacuum, so a hollow cable with 8 mm inner diameter is design as water-cooling channel for heat convection. By using the methods of the theoretical derivation, together with CFD numeric simulation method and the experiment of the heat transfer, the water channel of HL-2M in-vessel coils has been studied, and the temperature of HL-2M in-vessel coils under different cooling water flow rates is obtained and acceptable. Simultaneously, the external cooling water supply system parameters for the water-cooling channel of the coils are estimated. Three methods’ results are in good agreement; the theoretical model is verified and could be popularized for predicting the temperature rise of HL-2M in-vessel coils.

  20. Global analysis of depletion and recovery of seabed biota after bottom trawling disturbance.

    Science.gov (United States)

    Hiddink, Jan Geert; Jennings, Simon; Sciberras, Marija; Szostek, Claire L; Hughes, Kathryn M; Ellis, Nick; Rijnsdorp, Adriaan D; McConnaughey, Robert A; Mazor, Tessa; Hilborn, Ray; Collie, Jeremy S; Pitcher, C Roland; Amoroso, Ricardo O; Parma, Ana M; Suuronen, Petri; Kaiser, Michel J

    2017-08-01

    Bottom trawling is the most widespread human activity affecting seabed habitats. Here, we collate all available data for experimental and comparative studies of trawling impacts on whole communities of seabed macroinvertebrates on sedimentary habitats and develop widely applicable methods to estimate depletion and recovery rates of biota after trawling. Depletion of biota and trawl penetration into the seabed are highly correlated. Otter trawls caused the least depletion, removing 6% of biota per pass and penetrating the seabed on average down to 2.4 cm, whereas hydraulic dredges caused the most depletion, removing 41% of biota and penetrating the seabed on average 16.1 cm. Median recovery times posttrawling (from 50 to 95% of unimpacted biomass) ranged between 1.9 and 6.4 y. By accounting for the effects of penetration depth, environmental variation, and uncertainty, the models explained much of the variability of depletion and recovery estimates from single studies. Coupled with large-scale, high-resolution maps of trawling frequency and habitat, our estimates of depletion and recovery rates enable the assessment of trawling impacts on unprecedented spatial scales.

  1. Epibenthic diversity and productivity on a heavily trawled Barents Sea bank (Tromsøflaket

    Directory of Open Access Journals (Sweden)

    Monika Kędra

    2017-04-01

    Full Text Available Shallow Arctic banks have been observed to harbour rich communities of epifaunal organisms, but have not been well-studied with respect to composition or function due to sampling challenges. In order to determine how these banks function in the Barents Sea ecosystem, we used a combination of video and trawl/dredge sampling at several locations on a heavily trawled bank, Tromsøflaket – located at the southwestern entrance to the Barents Sea. We describe components of the benthic community, and calculate secondary production of dominant epifaunal organisms. Forty-six epibenthic taxa were identified, and sponges were a significant part of the surveyed benthic communities. There were differences in diversity and production among areas, mainly related to the intensity of trawling activities. Gamma was the most diverse and productive area, with highest species abundance and biomass. Trawled areas had considerably lower species numbers, and significant differences in epifaunal abundance and biomass were found between all trawled and untrawled areas. Trawling seems to have an impact on the sponge communities: mean individual poriferan biomass was higher in untrawled areas, and, although poriferans were observed in areas subjected to more intensive trawling, they were at least five times less frequent than in untrawled areas.

  2. Behaviour of fish by-catch in the mouth of a crustacean trawl.

    Science.gov (United States)

    Queirolo, D; Gaete, E; Montenegro, I; Soriguer, M C; Erzini, K

    2012-06-01

    The behaviour of fish by-catch was recorded and characterized by in situ observations in the mouth of a crustacean trawl using an underwater camera system with artificial light, at depths between 106 and 461 m, along the central coast of Chile. The groups or species studied were rattails (family Macrouridae), Chilean hake Merluccius gayi gayi, sharks (orders Carcharhiniformes and Squaliformes), skates (family Rajidae), flatfishes (genus Hippoglossina) and small benthopelagic and demersal fishes (orders Osmeriformes, Stomiiformes, Gadiformes, Ophidiiformes and Perciformes). The fish behaviour was categorized in terms of (1) position in the water column, (2) initial orientation with respect to the trawl, (3) locomotion and (4) swimming speed with respect to the trawl. Rattails, sharks, skates and flatfishes were passive in response to the trawl and showed similar behavioural patterns, with most fishes observed sitting or touching the bottom with no swimming or other activity. Merluccius gayi gayi was the most active species, displaying a wide combination of behavioural responses when the trawl approached. This species showed several behavioural patterns, mainly characterized by swimming forward at variable speed. A fraction of small bentho-pelagic and demersal fishes also showed an active behaviour but always at lower speed than the trawl. The species-specific differences in behaviour in the mouth of the trawl suggest that improvements at the level of the footrope can be made to reduce by-catch, especially of passive species. © 2012 The Authors. Journal of Fish Biology © 2012 The Fisheries Society of the British Isles.

  3. Configuring the Mesh Size, Side Taper and Wing Depth of Penaeid Trawls to Reduce Environmental Impacts

    Science.gov (United States)

    Broadhurst, Matt K.; Sterling, David J.; Millar, Russell B.

    2014-01-01

    The effects of reducing mesh size while concomitantly varying the side taper and wing depth of a generic penaeid-trawl body were investigated to improve engineering performance and minimize bycatch. Five trawl bodies (with the same codends) were tested across various environmental (e.g. depth and current) and biological (e.g. species and sizes) conditions. The first trawl body comprised 41-mm mesh and represented conventional designs (termed the ‘41 long deep-wing'), while the remaining trawl bodies were made from 32-mm mesh and differed only in their side tapers, and therefore length (i.e. 1N3B or ‘long’ and ∼28o to the tow direction vs 1N5B or ‘short’ and ∼35o) and wing depths (‘deep’–97 T vs ‘shallow’–60 T). There were incremental drag reductions (and therefore fuel savings – by up to 18 and 12% per h and ha trawled) associated with reducing twine area via either modification, and subsequently minimizing otter-board area in attempts to standardize spread. Side taper and wing depth had interactive and varied effects on species selectivity, but compared to the conventional 41 long deep-wing trawl, the 32 short shallow-wing trawl (i.e. the least twine area) reduced the total bycatch by 57% (attributed to more fish swimming forward and escaping). In most cases, all small-meshed trawls also caught more smaller school prawns Metapenaeus macleayi but to decrease this effect it should be possible to increase mesh size slightly, while still maintaining the above engineering benefits and species selectivity. The results support precisely optimizing mesh size as a precursor to any other anterior penaeid-trawl modifications designed to improve environmental performance. PMID:24911786

  4. In-vessel tritium

    International Nuclear Information System (INIS)

    Ueda, Yoshio; Ohya, Kaoru; Ashikawa, Naoko; Ito, Atsushi M.; Kato, Daiji; Kawamura, Gakushi; Takayama, Arimichi; Tomita, Yukihiro; Nakamura, Hiroaki; Ono, Tadayoshi; Kawashima, Hisato; Shimizu, Katsuhiro; Takizuka, Tomonori; Nakano, Tomohide; Nakamura, Makoto; Hoshino, Kazuo; Kenmotsu, Takahiro; Wada, Motoi; Saito, Seiki; Takagi, Ikuji; Tanaka, Yasunori; Tanabe, Tetsuo; Yoshida, Masafumi; Toma, Mitsunori; Hatayama, Akiyoshi; Homma, Yuki; Tolstikhina, Inga Yu.

    2012-01-01

    The in-vessel tritium research is closely related to the plasma-materials interaction. It deals with the edge-plasma-wall interaction, the wall erosion, transport and re-deposition of neutral particles and the effect of neutral particles on the fuel recycling. Since the in-vessel tritium shows a complex nonlinear behavior, there remain many unsolved problems. So far, behaviors of in-vessel tritium have been investigated by two groups A01 and A02. The A01 group performed experiments on accumulation and recovery of tritium in thermonuclear fusion reactors and the A02 group studied theory and simulation on the in-vessel tritium behavior. In the present article, outcomes of the research are reviewed. (author)

  5. Developing a Computational Environment for Coupling MOR Data, Maps, and Models: The Virtual Research Vessel (VRV) Prototype

    Science.gov (United States)

    Wright, D. J.; O'Dea, E.; Cushing, J. B.; Cuny, J. E.; Toomey, D. R.; Hackett, K.; Tikekar, R.

    2001-12-01

    The East Pacific Rise (EPR) from 9-10deg. N is currently our best-studied section of fast-spreading mid-ocean ridge. During several decades of investigation it has been explored by the full spectrum of ridge investigators, including chemists, biologists, geologists and geophysicists. These studies, and those that are ongoing, provide a wealth of observational data, results and data-driven theoretical (often numerical) studies that have not yet been fully utilized either by research scientists or by professional educators. While the situation is improving, a large amount of data, results, and related theoretical models still exist either in an inert, non-interactive form (e.g., journal publications) or as unlinked and currently incompatible computer data or algorithms. Infrastructure is needed not just for ready access to data, but linkage of disparate data sets (data to data) as well as data to models in order quantitatively evaluate hypotheses, refine numerical simulations, and explore new relations between observables. The prototype of a computational environment and toolset, called the Virtual Research Vessel (VRV), is being developed to provide scientists and educators with ready access to data, results and numerical models. While this effort is focused on the EPR 9N region, the resulting software tools and infrastructure should be helpful in establishing similar systems for other sections of the global mid-ocean ridge. Work in progress includes efforts to develop: (1) virtual database to incorporate diverse data types with domain-specific metadata into a global schema that allows web-query across different marine geology data sets, and an analogous declarative (database available) description of tools and models; (2) the ability to move data between GIS and the above DBMS, and tools to encourage data submission to archivesl (3) tools for finding and viewing archives, and translating between formats; (4) support for "computational steering" (tool composition

  6. The mobilisation of sediment by demersal otter trawls.

    Science.gov (United States)

    O'Neill, F G; Summerbell, K

    2011-05-01

    The mobilisation of sediment by towed demersal fishing gears has been related to the release of nutrients, benthic infaunal mortality and the resuspension of phytoplankton cysts and copepod eggs. Hence, to understand the broader environmental and ecological implications of demersal fishing, it is important to be able to estimate accurately the amount of sediment put into the water column by towed gears. Experimental trials were carried out in the Moray Firth, Scotland, to measure the quantity of sediment remobilised by trawl gear components. It is demonstrated, for a given sediment type, that there is a relationship between the hydrodynamic drag of the gear element and the mass of sediment entrained behind it. A better understanding of this relationship and the hydrodynamic processes involved will lead to the development of accurate predictive models and aid the design of fishing gears of reduced impact. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

  7. Long Term Validation of High Precision RTK Positioning Onboard a Ferry Vessel Using the MGBAS in the Research Port of Rostock

    Directory of Open Access Journals (Sweden)

    Ralf Ziebold

    2017-09-01

    Full Text Available In order to enable port operations, which require an accuracy of about 10cm, the German Aerospace Center (DLR operates the Maritime Ground Based Augmentation Service (MGBAS in the Research Port of Rostock. The MGBAS reference station provides GPS dual frequency code + phase correction data, which are continuously transmitted via an ultra-high frequency (UHF modem. Up to now the validation of the MGBAS was rather limited. Either a second shore based station was used as an artificial user, or measurement campaigns on a vessel with duration of a few hours have been conducted. In order to overcome this, we have installed three separate dual frequency antennas and receivers and a UHF modem on the Stena Line ferry vessel Mecklenburg-Vorpommern which is plying between Rostock and Trelleborg. This paper concentrates on the analysis of the highly accurate phase based positioning with a Real Time Kinematic (RTK algorithm, using correction data received by the UHF modem onboard the vessel. We analyzed the availability and accuracy of RTK fix solutions for several days, whenever the ferry vessel was inside the service area of the MGBAS.

  8. Spring Coastal Pelagic Species Acoustic Trawl Survey (SH1404, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — 14 Acoustic transects were run offshore of Southern California between San Francisco and Cape Mendocino, CA with CTD casts conducted daily and trawls nightly based...

  9. AFSC/RACE/MACE: Results of 2012 Chukchi Sea Acoustic/Trawl Survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — We conducted acoustic-trawl (AT) surveys of the Alaska northern Bering and Chukchi Seas during ice-free periods with a focus on Arctic cod (Boreogadus saida), a key...

  10. Antarctic krill; assessment of mesh size selectivity and escape mortality from trawls

    DEFF Research Database (Denmark)

    Krafft, Bjørn A.; Krag, Ludvig Ahm; Herrmann, Bent

    2015-01-01

    Marine AS. The project will examine krill escape mortality from the codend during a full scale field experiment, model size selectivity and escape mortality in codends including different designs and assess the size selectivity in the trawl body forward of the codend. Based on end results from the preceding...... examinations we will be able to predict size selectivity and escape mortality from the entire trawl body with the appurtenant mortality for different trawl designs......This working paper presents the aims and methodology for a three-year-project (commenced in 2015) assessing size selectivity and escape mortality of Antarctic krill from trawl nets. The project is widely based on acquired experiences from a completed study Net Escapement of Antarctic krill...

  11. AFSC/RACE/MACE: Results of 2014 acoustic trawl survey Bogoslof DY1402

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Scientists from the Midwater Assessment and Conservation Engineering (MACE) Program of the Alaska Fisheries Science Center (AFSC) regularly conduct acoustic-trawl...

  12. SWFSC FED Mid Water Trawl Juvenile Rockfish Survey, Surface Data, 1987-2015

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — SWFSC FED Mid Water Trawl Juvenile Rockfish Survey: Station Information and Surface Data. Surveys have been conducted along the central California coast in May/June...

  13. SWFSC FED Mid Water Trawl Juvenile Rockfish Survey, CTD Data, 1987-2015

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — SWFSC FED Mid Water Trawl Juvenile Rockfish Survey: CTD Data. Surveys have been conducted along the central California coast in May/June every year since 1983. In...

  14. Shelikof Strait Acoustic-Trawl Survey of Walleye Pollock (DY1203, ME70)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Midwater Assessment and Conservation Engineering (MACE) program of the Alaska Fisheries Science Center (AFSC) conducted an acoustic-trawl (AT) stock assessment...

  15. Shumagin Islands Acoustic-Trawl Survey of Walleye Pollock (DY1201, ME70)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Midwater Assessment and Conservation Engineering (MACE) program of the Alaska Fisheries Science Center (AFSC) conducted an acoustic-trawl (AT) stock assessment...

  16. AFSC/RACE/MACE: Results of 2015 acoustic trawl survey Shumagin/Sanak/PWS DY1502

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The surveys primary objective was to collect acoustic data and trawl information to estimate midwater abundance and distribution of walleye pollock (Gadus...

  17. NWFSC Observer Trawl Data, off West Coast of US, 2002-2006

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Observer Trawl Data collected during 2002-2006 off West Coast of US. This data product originates from data collected by fishery observers in the West Coast...

  18. Oceanographic data - Integrated acoustic and trawl survey of Pacific hake off the Pacific Coast

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Integrated acoustic and trawl surveys are used to assess the distribution, biomass, and biology of Pacific hake along the Pacific coasts of the United States and...

  19. AFSC/RACE/MACE: Results of 2015 acoustic trawl survey Gulf of Alaska M1501

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Three trawl-resistant bottom- mounted moorings (TRBM) instrumented with newly developed autonomous battery powered 70 kHz split-beam echosounders were deployed in...

  20. Trawl survey data are applied in fish stock assessment mainly to ...

    African Journals Online (AJOL)

    denise

    Merluccius capensis (shallow-water Cape hake) and. M. paradoxus (deep-water Cape hake) off Namibia provide an ... published data), meaning that the horizontal trawl opening will .... Acoustic data were post-processed twice daily. Hake.

  1. Bycatch in 36 and 40 mm PA Turkish twin rigged beam trawl codends

    African Journals Online (AJOL)

    Jane

    2011-07-20

    Jul 20, 2011 ... Thus, landings of the shrimp beam trawling fleet also include some commercially valuable fishes. ... Fishing has significant direct and indirect effects on the habitat, diversity ..... Statistics 2006. State Institute of Statistics Prime.

  2. SEAMAP Groundfish/Shrimp Trawl Red Snapper Analytical Dataset Provided to NRDA

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Southeast Fisheries Science Center Mississippi Laboratories has conducted standardized groundfish trawl surveys in the Gulf of Mexico since 1987. Prior to 1987,...

  3. Biological data - Integrated acoustic and trawl survey of Pacific hake off the Pacific Coast

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Integrated acoustic and trawl surveys are used to assess the distribution, biomass, and biology of Pacific hake along the Pacific coasts of the United States and...

  4. NEFSC 2008 Spring Bottom Trawl Survey - Site Specific Calibration (HB0803, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC bottom trawl survey is a fisheries independent, multi-species survey that provides the primary scientific data for fisheries assessments in the U.S....

  5. Study on operation conditions and an operation system of a nuclear powered submersible research vessel, 'report of working group on application of a very small nuclear reactor to an ocean research'

    International Nuclear Information System (INIS)

    Ura, Tamaki; Takamasa, Tomoji; Nishimura, Hajime

    2001-07-01

    JAERI has studied on design of a nuclear powered submersible research vessel, which will navigate under sea mainly in the Arctic Ocean, as a part of the design activity of advanced marine reactors. This report describes operation conditions and an operating system of the vessel, which were discussed by the specialists of hull design, sound positioning, ship motions and oceanography, etc. The design conditions on ship motions for submersible vessels were surveyed considering regulations in our country, and ship motions were evaluated in the cases of underwater and surface navigations taking account of observation activities in the Arctic Ocean. The effect of ship motions on the compact nuclear reactor SCR was assessed. A submarine transponder system and an on-ice communication buoy system were examined as a positioning and communication system, supposing the activity under ice. The interval between transponders or communication buoys was recommended as 130 km. Procedures to secure safety of nuclear powered submersible research vessel were discussed according to accidents on the hull or the nuclear reactor. These results were reflected to the concept of the nuclear powered submersible research vessel, and subjects to be settled in the next step were clarified. (author)

  6. Study on operation conditions and an operation system of a nuclear powered submersible research vessel, 'report of working group on application of a very small nuclear reactor to an ocean research'

    Energy Technology Data Exchange (ETDEWEB)

    Ura, Tamaki [Tokyo Univ., Tokyo (Japan); Takamasa, Tomoji [Tokyo Univ. of Mercantile Marine, Tokyo (Japan); Nishimura, Hajime [Japan Marine Science and Technology Center, Yokosuka, Kanagawa (JP)] [and others

    2001-07-01

    JAERI has studied on design of a nuclear powered submersible research vessel, which will navigate under sea mainly in the Arctic Ocean, as a part of the design activity of advanced marine reactors. This report describes operation conditions and an operating system of the vessel, which were discussed by the specialists of hull design, sound positioning, ship motions and oceanography, etc. The design conditions on ship motions for submersible vessels were surveyed considering regulations in our country, and ship motions were evaluated in the cases of underwater and surface navigations taking account of observation activities in the Arctic Ocean. The effect of ship motions on the compact nuclear reactor SCR was assessed. A submarine transponder system and an on-ice communication buoy system were examined as a positioning and communication system, supposing the activity under ice. The interval between transponders or communication buoys was recommended as 130 km. Procedures to secure safety of nuclear powered submersible research vessel were discussed according to accidents on the hull or the nuclear reactor. These results were reflected to the concept of the nuclear powered submersible research vessel, and subjects to be settled in the next step were clarified. (author)

  7. Antibody-linked drug destroys tumor cells and tumor blood vessels in many types of cancer | Center for Cancer Research

    Science.gov (United States)

    A team led by Brad St. Croix, Ph.D., Senior Associate Scientist, Mouse Cancer Genetics Program, has developed an antibody-drug conjugate (ADC) that destroys both tumor cells and the blood vessels that nourish them. The drug significantly shrank breast tumors, colon tumors and several other types of cancer and prolonged survival. Learn more...  

  8. Bottom trawling affects fish condition through changes in the ratio of prey availability to density of competitors

    DEFF Research Database (Denmark)

    Hiddink, Jan Geert; Moranta, Joan; Balestrini, Stephen

    2016-01-01

    pressure. 2. We assessed the impact of bottom trawling on the food availability, condition and stomach contents of three flatfishes and the Norway lobster in an area in the Kattegat hat is characterized by a steep commercial bottom-trawling gradient due to the establishment of an area closed to all....... This pattern was mirrored in both the condition and stomach contents of plaice and for long-rough dab. 4. No effect of trawling on dab prey and condition was found. Conversely, the condition of the main target species – Norway lobster – increased as its biomass decreased with increased trawling intensities. 5...

  9. The vessel fluence; Fluence cuve

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This book presents the proceedings of the technical meeting on the reactors vessels fluence. They are grouped in eight sessions: the industrial context and the stakes of the vessels control; the organization and the methodology for the fluence computation; the concerned physical properties; the reference computation methods; the fluence monitoring in an industrial context; vessels monitoring under irradiation; others methods in the world; the research and development programs. (A.L.B.)

  10. Bottom trawl assessment of Lake Ontario prey fishes

    Science.gov (United States)

    Weidel, Brian C.; Connerton, Michael J.; Holden, Jeremy

    2018-01-01

    Managing Lake Ontario fisheries in an ecosystem-context requires prey fish community and population data. Since 1978, multiple annual bottom trawl surveys have quantified prey fish dynamics to inform management relative to published Fish Community Objectives. In 2017, two whole-lake surveys collected 341 bottom trawls (spring: 204, fall: 137), at depths from 8-225m, and captured 751,350 fish from 29 species. Alewife were 90% of the total fish catch while Deepwater Sculpin, Round Goby, and Rainbow Smelt comprised the majority of the remaining total catch (3.8, 3.1, and 1.1% respectively). The adult Alewife abundance index for US waters increased in 2017 relative to 2016, however the index for Canadian waters declined. Adult Alewife condition, assessed by the predicted weight of a 165 mm fish (6.5 inches), declined in 2017 from record high values observed in spring 2016. Spring 2017 Alewife condition was slightly less than the 10-year average, but the fall value was well below the 10-year average, likely due to increased Age-1 Alewife abundance. The Age-1 Alewife abundance index was the highest observed in 40 years, and 8-times higher than the previous year. The Age-1 index estimates Alewife reproductive success the preceding year. The warm summer and winter of 2016 likely contributed to the large year class. In contrast the relatively cool 2017 spring and cold winter may result in a lower than average 2017 year class. Abundance indices for Rainbow Smelt, Cisco, and Emerald Shiner either declined or remained at low levels in 2017. Pelagic prey fish diversity continues to be low since a single species, Alewife, dominates the catch. Deepwater Sculpin were the most abundant benthic prey fish in 2017 because Round Goby abundance declined sharply from 2016. Slimy Sculpin density continued to decline and the 2017 biomass index for US waters was the lowest ever observed. Prior to Round Goby proliferation, juvenile Slimy Sculpin comprised ~10% of the Slimy Sculpin catch, but

  11. Containment vessel

    International Nuclear Information System (INIS)

    Zbirohowski-Koscia, K.F.; Roberts, A.C.

    1980-01-01

    A concrete containment vessel for nuclear reactors is disclosed that is spherical and that has prestressing tendons disposed in first, second and third sets, the tendons of each set being all substantially concentric and centred around a respective one of the three orthogonal axes of the sphere; the tendons of the first set being anchored at each end at a first anchor rib running around a circumference of the vessel, the tendons of the second set being anchored at each end at a second anchor rib running around a circumference of the sphere and disposed at 90 0 to the first rib, and the tendons of the third set being anchored some to the first rib and the remainder to the second rib. (author)

  12. A study on corium melt pool behavior under external vessel cooling : investigation of the first phase research results in the OECD RASPLAV project

    Energy Technology Data Exchange (ETDEWEB)

    Park, Rae Joon; Kim, Sang Baik; Kim, Hee Dong; Yoo, Kun Joong

    1998-04-01

    The scope and contents of the OECD RASPLAV program are to investigate natural convection heat transfer in the corium, chemical and mechanical interaction between the corium and the reactor vessel, crust formation of the corium, and thermal behaviour of the corium by experiments and model development during external vessel cooling to prevent reactor vessel failure in severe accidents of nuclear power plant. This study includes evaluation and analysis of the RASPLAV V phase I results for three years between July 1, 1994 and June 30, 1997. These results supply technical basis for our experimental program on severe accident research. Two large-scale experiments of RASPLAV-AW-between the corium and the reactor vessel. Several small-scale experiments were conducted to analyze thermal stratification in the corium. The salt experiments were conducted to estimate the crust and the mushy region formation, and natural convection heat transfer in the corium. In the analytical studies, pre and post analysis of the RASPLAV-AW-200 experiments and evaluation of the salt test results have been performed using CONV 2 and 3D computer codes, which were developed during RASPLAV program phase I. Low density corium was separated from the high density corium during the RASPLAV-AW-200 tests and the TULPAN test, which was a new finding in the RASPLAV project phase I. From the salts test, heat flux distribution in the side wall heating case is similar to the direct internal heat generation case, and the crust formation is a little effect on heat transfer rate. The results of CONV 2 and 3 D were very well with with the experimental results. The results of RASLAV project phase I, such as furnace design and the techniques on fuel melting, are very helpful to our severe accident experimental program. (author). 57 refs., 13 tabs., 52 figs.

  13. Visualization of vessel traffic

    NARCIS (Netherlands)

    Willems, C.M.E.

    2011-01-01

    Moving objects are captured in multivariate trajectories, often large data with multiple attributes. We focus on vessel traffic as a source of such data. Patterns appearing from visually analyzing attributes are used to explain why certain movements have occurred. In this research, we have developed

  14. Elasmobranch bycatch in the Italian Adriatic pelagic trawl fishery

    Science.gov (United States)

    Fortuna, Caterina Maria; Moro, Fabrizio; Sala, Antonello

    2018-01-01

    Elasmobranchs are among the most threatened long-lived marine species worldwide, and incidental capture is a major source of mortality. The northern central Adriatic Sea, though one of the most overfished basins of the Mediterranean Sea, supports a very valuable marine biodiversity, including elasmobranchs. This study assesses the impact of the northern central Adriatic pelagic trawl fishery on common smooth-hound (Mustelus mustelus), spiny dogfish (Squalus acanthias), common eagle ray (Myliobatis aquila), and pelagic stingray (Pteroplatytrygon violacea) by examining incidental catches recorded between 2006 and 2015. The distribution of bycatch events was evaluated using geo-referenced data. Generalized Linear Models were computed to standardize the catch of the four species and to predict the relative abundance of bycatch events. Data analysis shows that most bycatch events involving all four species occurred in the northern Adriatic Sea. The models predicted significant, distinct temporal patterns of standardized catches in line with previous investigations. Water depth, season, and fishing region were the best predictors to explain bycatch events. The present data suggest that the northern Adriatic may be an important nursery area for several elasmobranchs. They also highlight the urgent need for a better understanding of the interactions between elasmobranchs and fisheries to develop and apply suitable, ad hoc management measures. PMID:29377920

  15. Elasmobranch bycatch in the Italian Adriatic pelagic trawl fishery.

    Directory of Open Access Journals (Sweden)

    Sara Bonanomi

    Full Text Available Elasmobranchs are among the most threatened long-lived marine species worldwide, and incidental capture is a major source of mortality. The northern central Adriatic Sea, though one of the most overfished basins of the Mediterranean Sea, supports a very valuable marine biodiversity, including elasmobranchs. This study assesses the impact of the northern central Adriatic pelagic trawl fishery on common smooth-hound (Mustelus mustelus, spiny dogfish (Squalus acanthias, common eagle ray (Myliobatis aquila, and pelagic stingray (Pteroplatytrygon violacea by examining incidental catches recorded between 2006 and 2015. The distribution of bycatch events was evaluated using geo-referenced data. Generalized Linear Models were computed to standardize the catch of the four species and to predict the relative abundance of bycatch events. Data analysis shows that most bycatch events involving all four species occurred in the northern Adriatic Sea. The models predicted significant, distinct temporal patterns of standardized catches in line with previous investigations. Water depth, season, and fishing region were the best predictors to explain bycatch events. The present data suggest that the northern Adriatic may be an important nursery area for several elasmobranchs. They also highlight the urgent need for a better understanding of the interactions between elasmobranchs and fisheries to develop and apply suitable, ad hoc management measures.

  16. AFSC/RACE/GAP/Palsson: Gulf of Alaska and Aleutian Islands Biennial Bottom Trawl Survey estimates of catch per unit effort, biomass, population at length, and associated tables

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The GOA/AI Bottom Trawl Estimate database contains abundance estimates for the Alaska Biennial Bottom Trawl Surveys conducted in the Gulf of Alaska and the Aleutian...

  17. Deep Sea Coral voucher sequence dataset - Identification of deep-sea corals collected during the 2009 - 2014 West Coast Groundfish Bottom Trawl Survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Data for this project resides in the West Coast Groundfish Bottom Trawl Survey Database. Deep-sea corals are often components of trawling bycatch, though their...

  18. Recovery of Seamount Precious Coral Beds From Heavy Trawling Disturbance with Links to Carbonate Chemistry Changes

    Science.gov (United States)

    Roark, E. B.; Baco-Taylor, A.; Morgan, N. B.; Shamberger, K.; Miller, K.; Brooks, J.

    2016-12-01

    Increasing anthropogenic impacts in the deep sea make studies of resilience and recovery time critical, with deep-sea hard-substrate habitats and large-scale disturbances having received little attention. Seamount hard-substrate habitats in particular are thought to have low resilience due to the slow growth rates and recruitment limitations of key structure-forming taxa. Seamounts of the far Northwestern Hawaiian Islands and Emperor Chain have had some of the heaviest trawl impacts in the world, from both fish and precious coral fisheries, and include sites that are still trawled and recovering ones that have been protected since establishment of the EEZ in 1977. To test the hypothesis of low resilience we compare these impacted seamounts to untrawled sites. We used the AUV Sentry in 2014 and 2015 to image nine features (three per "treatment") and analyze for substrate and visible megafauna. Sites in the "still trawled" treatment were characterized by extensive areas of bare substrate with abundant trawl scars. Sites in the "recovering" and "never trawled" locations had abundant megafauna in hard substrate areas. Initial comparisons of transects at 700m depth for three sites indicate that Yuryaku in the "still trawled" treatment had lower diversity and abundance of megafauna compared to the "recovering" and "never trawled" locations with a dominance of sea urchins. The "recovering" and "never trawled" sites were dominated by cnidarians, fishes, and echinoderms, but differed in dominant species, diversity, abundances and occurrence of dead coral skeletons. These preliminary results suggest that the recovering sites have not returned to a pre-impact community type in the 38 years since they were trawled. The megafauna distribution, in particular that of deep-sea corals, was compared to environmental water column variables at the study sites across the Northwestern Hawaiian Islands. Deep-sea corals with calcium carbonate skeletons were found living below the

  19. 50 CFR 660.130 - Trawl fishery-management measures.

    Science.gov (United States)

    2010-10-01

    ... require that vessels record their landings as sorted on their state landing receipt. (1) Coastwide. Widow..., Farallon Islands/Fanny Shoal, Half Moon Bay, Monterey Bay/Canyon, Point Sur Deep, Big Sur Coast/Port San...

  20. The NSW Steam Trawl Fishery on the South-East Continental Shelf of Australia, 1915–1961

    DEFF Research Database (Denmark)

    Lund Jacobsen, A. Lif

    2014-01-01

    How was modern fishing methods, in the form of steam trawling, introduced in Australia? And what were the consequences for the fish stocks found on the South-East Continental Shelf? Through historical catch records and archival resources, the history of the NSW Steam Trawl Industry from 1915...

  1. 75 FR 4684 - Fisheries off West Coast States; Pacific Coast Groundfish Fishery; Data Collection for the Trawl...

    Science.gov (United States)

    2010-01-29

    ... Coast groundfish fishery. The trawl rationalization program is intended to increase net economic benefits, create individual economic stability, provide full utilization of the trawl sector allocation... one time reporting will have a significant economic impact on small entities, as the estimated...

  2. Reactor pressure vessel steels

    International Nuclear Information System (INIS)

    Van De Velde, J.; Fabry, A.; Van Walle, E.; Chaouuadi, R.

    1998-01-01

    Research and development activities related to reactor pressure vessel steels during 1997 are reported. The objectives of activities of the Belgian Nuclear Research Centre SCK/CEN in this domain are: (1) to develop enhanced surveillance concepts by applying micromechanics and fracture-toughness tests to small specimens, and by performing damage modelling and microstructure characterization; (2) to demonstrate a methodology on a broad database; (3) to achieve regulatory acceptance and industrial use

  3. Bio-economic evaluation of implementing trawl fishing gear with different selectivity

    DEFF Research Database (Denmark)

    Grønbæk Kronbak, Lone; Nielsen, J. Rasmus; Jørgensen, Ole A.

    2009-01-01

    The paper develops a biological-economic evaluation tool to analyse the consequences for trawl fishers of implementing more selective fishing technologies. This is done by merging a dynamic biological population model and an economic cost-benefit evaluation framework to describe the consequences...... with a baseline. The results from the evaluation are indicators for the consequences on ecological and economic levels. The results show that implementation of different selective fishing gear in the Kattegat and Skagerrak mixed trawl fisheries generally implies a trade off over time between rebuilding the stocks...... for the fish stocks, fishermen and society. The bio-economic evaluation is applied to the case of the Danish trawl fishery in Kattegat and Skagerrak, which experiences a high level of discards and byratches of several species. Four different kinds of selectivity scenarios are evaluated in comparison...

  4. Bio-economic evaluation of implementing trawl fishing gear with different selectivity

    DEFF Research Database (Denmark)

    Kronbak, Lone Grønbæk; Nielsen, J. Rasmus; Jørgensen, Ole A.

    2009-01-01

    The paper develops a biological-economic evaluation tool to analyse the consequences for trawl fishers of implementing more selective fishing technologies. This is done by merging a dynamic biological population model and an economic cost-benefit evaluation framework to describe the consequences...... with a baseline. The results from the evaluation are indicators for the consequences on ecological and economic levels. The results show that implementation of different selective fishing gear in the Kattegat and Skagerrak mixed trawl fisheries generally implies a trade off over time between rebuilding the stocks...... for the fish stocks, fishermen and society. The bio-economic evaluation is applied to the case of the Danish trawl fishery in Kattegat and Skagerrak, which experiences a high level of discards and bycatches of several species. Four different kinds of selectivity scenarios are evaluated in comparison...

  5. Environmental DNA from seawater samples correlate with trawl catches of Subarctic, deepwater fishes

    DEFF Research Database (Denmark)

    Thomsen, Philip Francis; Møller, Peter Rask; Sigsgaard, Eva Egelyng

    2016-01-01

    depths in Southwest Greenland. We collected seawater samples at depths of 188-918 m and compared seawater eDNA to catch data from trawling. We used Illumina sequencing of PCR products to demonstrate that eDNA reads show equivalence to fishing catch data obtained from trawling. Twenty-six families were......Remote polar and deepwater fish faunas are under pressure from ongoing climate change and increasing fishing effort. However, these fish communities are difficult to monitor for logistic and financial reasons. Currently, monitoring of marine fishes largely relies on invasive techniques...... such as bottom trawling, and on official reporting of global catches, which can be unreliable. Thus, there is need for alternative and non-invasive techniques for qualitative and quantitative oceanic fish surveys. Here we report environmental DNA (eDNA) metabarcoding of seawater samples from continental slope...

  6. Assessing and mitigating of bottom trawling. Final BENTHIS project Report (Benthic Ecosystem Fisheries Impact Study)

    DEFF Research Database (Denmark)

    Rijnsdorp, Adriaan D; Eigaard, Ole Ritzau; Kenny, Andrew

    2017-01-01

    the fuel cost without affecting the catch rate of the target species. Replacing mechanical stimulation by tickler chains with electrical stimulation In the beam trawl fishery for sole, reduced footprint and penetration depth as well as the fuel cost. Electrical stimulation is also a promising innovation...... to reduce the bycatch and bottom contact in the beam trawl fishery for brown shrimps. Sea trials to replace bottom trawls with pots were inconclusive. Results suggest that creels may offer an alternative for small Nephrops fishers in the Kattegat. In waters off Greece, the catch rates were very low. Sea...... trials with the blue mussel fishery showed that fishers could reduce their footprint by deploying acoustic equipment to detect mussel concentrations that allow the fishers to more precisely target the mussel beds and hence reduce fishing in areas with low mussel density. A review of the various case...

  7. An Improved Backstepping-Based Controller for Three-Dimensional Trajectory Tracking of a Midwater Trawl System

    Directory of Open Access Journals (Sweden)

    Zhao Yan

    2016-01-01

    Full Text Available An improved backstepping control method for three-dimensional trajectory tracking of a midwater trawl system is investigated. A new mathematical model of the trawl system while considering the horizontal expansion effect of two otter boards is presented based on the Newton Euler method. Subsequently, an active path tracking strategy of the trawl system based on the backstepping method is proposed. The nonstrict feedback characteristic of the proposed model employs a control allocation method and several parallel nonlinear PID (Proportion Integration Differentiation controllers to eliminate the high-order state variables. Then, the stability analysis by the Lyapunov Stability Theory shows that the proposed controller can maintain the stability of the trawl system even with the presence of external disturbances. To validate the proposed controller, a simulation comparison with a linear PID controller was conducted. The simulation results illustrate that the improved backstepping controller is effective for three-dimensional trajectory tracking of the midwater trawl system.

  8. Integrating the provision of ecosystem services and trawl fisheries for the management of the marine environment.

    Science.gov (United States)

    Muntadas, Alba; de Juan, Silvia; Demestre, Montserrat

    2015-02-15

    The species interaction and their biological traits (BT) determine the function of benthic communities and, hence, the delivery of ecosystem services. Therefore, disturbance of benthic communities by trawling may compromise ecosystem service delivery, including fisheries' catches. In this work, we explore 1) the impact of trawling activities on benthic functional components (after the BTA approach) and 2) how trawling impact may affect the ecosystem services delivered by benthic communities. To this aim, we assessed the provision of ecosystem services by adopting the concept of Ecosystem Service Providers (ESP), i.e. ecological units that perform ecosystem functions that will ultimately deliver ecosystem services. We studied thirteen sites subjected to different levels of fishing effort in the Mediterranean. From a range of environmental variables included in the study, we found ESPs to be mainly affected by fishing effort and grain size. Our results suggested that habitat type has significant effects on the distribution of ESPs and this natural variability influences ESP response to trawling at a specific site. In order to summarize the complex relationships between human uses, ecosystem components and the demand for ecosystem services in trawling grounds, we adapted a DPSIR (Drivers-Pressures-State Change-Impact-Response) framework to the study area, emphasizing the role of society as Drivers of change and actors demanding management Responses. This integrative framework aims to inform managers about the interactions between all the elements involved in the management of trawling grounds, highlighting the need for an integrated approach in order to ensure ecosystem service provision. Copyright © 2014 Elsevier B.V. All rights reserved.

  9. Modelling and simulation of size selectivity in diamond mesh trawl cod-ends

    DEFF Research Database (Denmark)

    Herrmann, Bent

    of the fishing gear. The cod-end is the rearmost part of a trawl where catch accumulates and in which most of the size selection is known to take place. To date, the main method used to assess the selectivity of trawl cod-ends has been to run sea trials followed by statistical analysis of the obtained......Within many fisheries there is a widespread discard of fish. Furthermore, there are several fisheries where fish are caught before reaching the optimal size, leading to an adverse exploitation of the resources. One way to achieve a more optimal exploitation is to improve the size selectivity...

  10. Lost in translation? Multi-metric macrobenthos indicators and bottom trawling

    DEFF Research Database (Denmark)

    Gislason, Henrik; Bastardie, Francois; Dinesen, Grete E.

    2017-01-01

    trawling. We use linear mixed effects models to analyze how bottom trawling intensity affects the indicators used in the Danish (Danish Quality Index, DKI) and Swedish (Benthic Quality Index, BQI) environmental monitoring programs in the Kattegat, the sea area between Sweden and Denmark. Using year...... of individuals per sample (density), we expect species density and density to be positively correlated. This correlation was confirmed by a simulation model and by statistical analysis of the bottom samples in which log species density was highly significantly related to log density (r = 0.75, df = 144, p ...

  11. Deep-Sea Mega-Epibenthic Assemblages from the SW Portuguese Margin (NE Atlantic Subjected to Bottom-Trawling Fisheries

    Directory of Open Access Journals (Sweden)

    Sofia P. Ramalho

    2017-11-01

    Full Text Available Bottom-trawling fisheries are a common threat to the health of continental margins worldwide. Together with numerous environmental and biological processes, physical disturbance induced by trawlers can largely shape the benthic habitats and their associated assemblages. At the SW Portuguese Margin, crustacean bottom trawlers have exploited deep-sea habitats for a few decades, but its effects on the benthic biodiversity are practically unknown. During the spring-summer of 2013 and 2014, several Remotely Operated Vehicle (ROV video transects were used to investigate mega-epibenthic abundance, composition, and diversity in soft-sediment areas subjected to varying trawling pressures off Sines and Setúbal (200–800 m. Differences in mega-epibenthic assemblages were linked with environmental changes (depth, grain size, primary productivity and trawling disturbance. The effect of trawling was assessed between segments with similar habitat characteristics, i.e., muddy-sand bottoms between 300 and 500 m. Areas subjected to intensive trawling pressure showed a generally flattened seabed, with abundant recent trawl marks (up to 3 scars.100 m−1, indicating that the seabed physical integrity was compromised. Significant negative correlations were detected between various mega-epibenthic diversity indices [S, H′, and ET(20] and trawling pressure (h.cell−1.y−1. Furthermore, the distinct mega-epibenthic assemblages and absence of several sessile erect morphospecies at both low and highly disturbed locations by trawling off Sines, namely all seapen morphospecies found in non-trawled areas, demonstrates the negative influence of trawling fisheries on the benthic component of the study area. Also, low dissimilarity between assemblages from the main fishing grounds and the adjacent low-disturbance locations, suggests that the potentially negative influence of trawling can extend beyond the targeted areas (e.g., by the plumes of re-suspended sediments. The

  12. State of opening the cover and carrying out the checkup of the reactor vessel of the nuclear-powered ship 'Mutsu' by Japan Atomic Energy Research Institute

    International Nuclear Information System (INIS)

    1989-01-01

    In the checkup by opening the cover of the reactor vessel of the nuclear-powered ship 'Mutsu', Japan Atomic Energy Research Institute carried out the checkup and maintenance for the reactor proper, control system and primary coolant facilities including the secondary side of steam generators and the pressure balancing valve of the containment vessel. The works were classified into the opening of the reactor, checkup, maintenance and restoration. The opening was begun on August 4, 1988, and finished on December 5. The checkup and maintenance were begun on September 22, and are still continued now. The maximum radiation dose rate on the surfaces of fuel assemblies and control rods and at the positions 1 m distant from them was measured. The results of the checkup of various components are reported. In 290 absorbent rods of control rods, spot corrosion and discoloration were observed, of which the spot corrosion penetrated the walls of 4 rods. Also in 12 fuel rods, spot corrosion was observed near the welded end plugs, but leak was not observed. (K.I.)

  13. 50 CFR 660.116 - Trawl fishery-observer requirements.

    Science.gov (United States)

    2010-10-01

    ...-sea processing vessels. The observer sampling station must include a table at least 0.6 m deep, 1.2 m... personal computer in working condition that contains a full Pentium 120 Mhz or greater capacity processing... decks, holding bins, processing areas, freezer spaces, weight scales, cargo holds, and any other space...

  14. Expanded Fermilab pressure vessel directory program

    Energy Technology Data Exchange (ETDEWEB)

    Tanner, A.

    1983-01-01

    Several procedures have been written to manage the information pertaining to the vacuum tanks and pressure vessels for which the laboratory is responsible. These procedures have been named TANK1 for the vessels belonging to the Accelerator Division, TANK2 and TANK3 for the vessels belonging to the Research Division and to Technical Support respectively, and TANK4 for the vessels belonging to the Business Division. The operating procedures are otherwise identical in every respect.

  15. Expanded Fermilab pressure vessel directory program

    International Nuclear Information System (INIS)

    Tanner, A.

    1983-01-01

    Several procedures have been written to manage the information pertaining to the vacuum tanks and pressure vessels for which the laboratory is responsible. These procedures have been named TANK1 for the vessels belonging to the Accelerator Division, TANK2 and TANK3 for the vessels belonging to the Research Division and to Technical Support respectively, and TANK4 for the vessels belonging to the Business Division. The operating procedures are otherwise identical in every respect

  16. Use of a fishery-independent trawl survey to evaluate distribution patterns of subadult sharks in Georgia

    Science.gov (United States)

    Belcher, C.N.; Jennings, Cecil A.

    2009-01-01

    We investigated the utility of a fishery-independent trawl survey for assessing a potential multispecies shark nursery in Georgia's nearshore and inshore waters. A total of 234 subadult sharks from six species were captured during 85 of 216 trawls. Catch rates and size distributions for subadult sharks and the ratio of neonates to juveniles were consistent among areas. The highest concentrations of subadult sharks occurred in creeks and sounds. Species composition varied among areas. The Atlantic sharpnose shark Rhizoprionodon terraenovae was the most abundant species in sound and nearshore stations, whereas the bonnethead Sphyrna tiburo was the most abundant species in creeks. The aggregate of other species occurred with higher frequency in the sounds and nearshore. Sampling characteristics of the trawl survey were compared with those from a fishery-independent longline survey of subadult sharks to assess the similarity of the two gears. A total of 193 subadult sharks from seven species were captured during 57 of 96 longline sets, whereas 52 subadults from four species were captured during 20 of 48 trawls. Selectivity and efficiency differed between the two gears. The trawl had lower catch rates, caught smaller sharks, and encountered a different suite of species than the longline. General seasonal trends in relative abundance also differed between the two gears; the longline showed an increasing trend in abundance, whereas the trawl showed a stable trend. Although trawls were not found to be efficient for sampling subadult sharks from most species, they can be a useful source of supplemental data.

  17. 50 CFR 660.381 - Limited entry trawl fishery management measures.

    Science.gov (United States)

    2010-10-01

    ... or tied along the length of the footrope). Other lines or ropes that run parallel to the footrope may... gear must have unprotected footropes at the trawl mouth, and must not have rollers, bobbins, tires... gear may not be enlarged by encircling it with chains or by any other means. Ropes or lines running...

  18. Demersal trawling on the South African south and east coasts for the ...

    African Journals Online (AJOL)

    spamer

    ralis was initiated in 1878, initially using a steam tug ... species composition, catch seasonality, catch per unit effort (cpue) and size-at-recruitment over the time ... Changes in the Eastern Cape demersal inshore trawl fishery operating out of Port ... MATERIAL AND METHODS ... The model parameters were estimated by mini-.

  19. 78 FR 7371 - Fisheries Off West Coast States; Pacific Coast Groundfish Fishery; Trawl Rationalization Program...

    Science.gov (United States)

    2013-02-01

    ... Rationalization Program; Cost Recovery AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and... Office rule goes final before the cost recovery program rule and if it would affect the appeals process... would implement a cost recovery program for the Pacific coast groundfish trawl rationalization program...

  20. Diel effects on bottom-trawl survey catch rates of shallow- and deep ...

    African Journals Online (AJOL)

    Fishing in depths shallower than 400 m outside daylight hours should therefore be avoided in order to reduce bias and ensure consistency in abundance estimates from surveys. Keywords: Benguela Current system, consistency of survey indices, efficiency of bottom-trawl surveys, negative binomial GAM, transect survey ...

  1. Stable isotopes reveal the effect of trawl fisheries on the diet of commercially exploited species

    DEFF Research Database (Denmark)

    Hinz, Hilmar; Moranta, Joan; Balestrini, Stephen

    2017-01-01

    both negatively and positively influence the quantity and quality of food available. Using δ 13C and δ 15N we investigated potential diet changes of three commercially exploited species across trawling gradients in the Kattegat (plaice, dab and Norway lobster (Nephrops)) and the Irish Sea (Nephrops...

  2. A 'simple anterior fish excluder' (SAFE for mitigating penaeid-trawl bycatch.

    Directory of Open Access Journals (Sweden)

    Matthew J McHugh

    Full Text Available Various plastic strips and sheets (termed 'simple anterior fish excluders'-SAFEs were positioned across the openings of penaeid trawls in attempts at reducing the unwanted bycatches of small teleosts. Initially, three SAFEs (a single wire without, and with small and large plastic panels were compared against a control (no SAFE on paired beam trawls. All SAFEs maintained targeted Metapenaeus macleayi catches, while the largest plastic SAFE significantly reduced total bycatch by 51% and the numbers of Pomatomus saltatrix, Mugil cephalus and Herklotsichthys castelnaui by up to 58%. A redesigned SAFE ('continuous plastic' was subsequently tested (against a control on paired otter trawls, significantly reducing total bycatch by 28% and P. saltatrix and H. castelnaui by up to 42%. The continuous-plastic SAFE also significantly reduced M. macleayi catches by ~7%, but this was explained by ~5% less wing-end spread, and could be simply negated through otter-board refinement. Further work is required to refine the tested SAFEs, and to quantify species-specific escape mechanisms. Nevertheless, the SAFE concept might represent an effective approach for improving penaeid-trawl selectivity.

  3. Towards a framework for the quantitative assessment of trawling impact on the seabed and benthic ecosystem

    DEFF Research Database (Denmark)

    Rijnsdorp, A. D.; Bastardie, Francois; Bolam, S.G.

    2016-01-01

    A framework to assess the impact of mobile fishing gear on the seabed and benthic ecosystem is presented. The framework that can be used at regional and local scales provides indicators for both trawling pressureand ecological impact. It builds on high-resolution maps of trawlingintensity and con...

  4. Comparison of gill nets and fixed-frame trawls for sampling threadfin shad in tropical reservoirs

    Czech Academy of Sciences Publication Activity Database

    Prchalová, Marie; Neal, J. W.; Munoz-Hincapie, M.; Jůza, Tomáš; Říha, Milan; Peterka, Jiří; Kubečka, Jan

    2012-01-01

    Roč. 141, č. 4 (2012), s. 1151-1160 ISSN 0002-8487 R&D Projects: GA ČR(CZ) GPP505/12/P647 Institutional support: RVO:60077344 Keywords : threadfin shad * gillnet * trawl * gear selectivity * catchability * reservoir Subject RIV: EH - Ecology, Behaviour Impact factor: 1.546, year: 2012

  5. Fish behaviour in responce to a midwater trawl footrope in temperate reservoirs

    Czech Academy of Sciences Publication Activity Database

    Sajdlová, Zuzana; Draštík, Vladislav; Jůza, Tomáš; Říha, Milan; Frouzová, Jaroslava; Čech, Martin; Vašek, Mojmír; Muška, Milan; Blabolil, Petr; Tušer, Michal; Kratochvíl, Michal; Peterka, Jiří; Mrkvička, Tomáš; Balk, Helge; Kubečka, Jan

    2015-01-01

    Roč. 172, December (2015), s. 105-113 ISSN 0165-7836 R&D Projects: GA MŠk(CZ) EE2.3.20.0204 Institutional support: RVO:60077344 Keywords : pair trawling * avoidance behaviour * SED echogram * open water * vertical track slope Subject RIV: EH - Ecology, Behaviour Impact factor: 2.230, year: 2015

  6. Inshore small-mesh trawling survey of the Cape south coast. Part 5 ...

    African Journals Online (AJOL)

    Inshore small-mesh trawling survey of the Cape south coast. Part 5. Crustacea, Stomatopoda, Isopoda and. Decapoda. B. Kensley and C.D. Buxton. Port Elizabeth Museum, Port Elizabeth. Forty-six species of Crustacea from the shallow marine waters of the southern Cape coast are listed. Five new records for the area.

  7. 50 CFR Figure 6 to Part 223 - TED Extension in Summer Flounder Trawl

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false TED Extension in Summer Flounder Trawl 6 Figure 6 to Part 223 Wildlife and Fisheries NATIONAL MARINE FISHERIES SERVICE, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS THREATENED MARINE AND ANADROMOUS SPECIES Pt. 223, Fig. 6 Figure 6 to Part 223—TED...

  8. Environmental DNA from Seawater Samples Correlate with Trawl Catches of Subarctic, Deepwater Fishes.

    Directory of Open Access Journals (Sweden)

    Philip Francis Thomsen

    Full Text Available Remote polar and deepwater fish faunas are under pressure from ongoing climate change and increasing fishing effort. However, these fish communities are difficult to monitor for logistic and financial reasons. Currently, monitoring of marine fishes largely relies on invasive techniques such as bottom trawling, and on official reporting of global catches, which can be unreliable. Thus, there is need for alternative and non-invasive techniques for qualitative and quantitative oceanic fish surveys. Here we report environmental DNA (eDNA metabarcoding of seawater samples from continental slope depths in Southwest Greenland. We collected seawater samples at depths of 188-918 m and compared seawater eDNA to catch data from trawling. We used Illumina sequencing of PCR products to demonstrate that eDNA reads show equivalence to fishing catch data obtained from trawling. Twenty-six families were found with both trawling and eDNA, while three families were found only with eDNA and two families were found only with trawling. Key commercial fish species for Greenland were the most abundant species in both eDNA reads and biomass catch, and interpolation of eDNA abundances between sampling sites showed good correspondence with catch sizes. Environmental DNA sequence reads from the fish assemblages correlated with biomass and abundance data obtained from trawling. Interestingly, the Greenland shark (Somniosus microcephalus showed high abundance of eDNA reads despite only a single specimen being caught, demonstrating the relevance of the eDNA approach for large species that can probably avoid bottom trawls in most cases. Quantitative detection of marine fish using eDNA remains to be tested further to ascertain whether this technique is able to yield credible results for routine application in fisheries. Nevertheless, our study demonstrates that eDNA reads can be used as a qualitative and quantitative proxy for marine fish assemblages in deepwater oceanic

  9. R.M.S Titanic 2003 Expedition on the Russian Research Vessel Akademik Mstislav Keldysh between 20030622 and 20030702

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — As the leading ocean agency, and as per the Guidelines for Research, Exploration and Salvage of RMS Titanic, issued under the authority of the RMS Titanic Maritime...

  10. The importance of Forensic research in the Nuclear Power Industry. What the OECD Three Mile Island reactor vessel investigation. Means to the future of commercial nuclear power

    International Nuclear Information System (INIS)

    Rogers, K.C.

    1994-01-01

    TMI-2 altered the perception of the likelihood of severe accidents and their precursors and shortly after the accident, changes began at the NRC. NRC required its nuclear power licensees to make a rather large number of back fits to respond to the lessons learned; NRC broadened the study of severe accident phenomena (focus on studies involving molten core materials); other lessons learned concerned the severe accident source terms and the shift from a deterministic tradition point of view to a probabilistic risk assessment formalism. A Revised Severe Accident Research Program Plan was issued in 1989. A review of what was known before the TMI-Vessel Investigation Project and what was not known, is presented

  11. Vessel Operator System

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Operator cards are required for any operator of a charter/party boat and or a commercial vessel (including carrier and processor vessels) issued a vessel permit from...

  12. The NSW Steam Trawl Fishery on the South-East Continental Shelf of Australia, 1915-1961

    DEFF Research Database (Denmark)

    Jacobsen, A. Lif Lund

    2014-01-01

    How was modern fishing methods, in the form of steam trawling, introduced in Australia? And what were the consequences for the fish stocks found on the South-East Continental Shelf? Through historical catch records and archival resources, the history of the NSW Steam Trawl Industry from 1915...... that flathead biomass on the South-East Continental shelf was permanently reduced. The study furthermore reveals how the trawl industry was influenced by government policy, market conditions, war and fishing effort with little understanding of the marine resources which they relied on....

  13. Benchmark Analyses of Sodium Natural Convection in the Upper Plenum of the Monju Reactor Vessel. Final Report of a Coordinated Research Project 2008-2012

    International Nuclear Information System (INIS)

    2014-11-01

    The IAEA supports Member States in the area of advanced fast reactor technology development by providing a major fulcrum for information exchange and collaborative research programmes. The IAEA’s activities in this field are mainly carried out within the framework of the Technical Working Group on Fast Reactors (TWG-FR), which assists in the implementation of corresponding IAEA support, and ensures that all technical activities are in line with expressed needs of Member States. Among this broad range, the IAEA proposes and establishes coordinated research projects (CRPs), aimed at improving Member State capability in fast reactor design and analysis. An important opportunity to perform collaborative research activities was provided by the system startup tests carried out by the Japan Atomic Energy Agency (JAEA) in the prototype loop type sodium cooled fast reactor Monju, in particular a turbine trip test performed in December 1995. As the JAEA opened the experimental dataset to international collaboration in 2008, the IAEA launched the CRP on Benchmark Analyses of Sodium Natural Convection in the Upper Plenum of the Monju Reactor Vessel. The CRP, together with eight institutes from seven States, has contributed to improving capabilities in sodium cooled fast reactors simulation through code verification and validation, with particular emphasis on thermal stratification and natural circulation phenomena

  14. AFSC/RACE/MACE: Results of 2012 Acoustic-trawl survey of the Shumagin Islands and Sanak Trough dy1201

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The survey’s primary objective was to collect acoustic data and trawl information to estimate midwater abundance and distribution of walleye pollock (Gadus...

  15. Acoustic-Trawl Survey of Walleye Pollock on the Eastern Bering Sea Shelf (DY1407, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — National Marine Fisheries Service (NMFS), Alaska Fisheries Science Center (AFSC) conducted an acoustic-trawl (AT) stock assessment survey on the eastern Bering Sea...

  16. NPRB711 Quantification of unobserved injury and mortality of Bering Sea crabs due to encounters with trawls on the seafloor

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The potential for unobserved mortality of crabs encountering bottom trawls, but not captured, has long been a concern in the management of Bering Sea fisheries. We...

  17. Mothership Cost Earnings Data - Economic Data Collection for Monitoring the Economic Effects of the West Coast Groundfish Trawl Rationalization Program

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project was initiated in response to regulation 50 CFR 660.114, which mandates that economic data be collected from every participant in the trawl...

  18. AFSC/RACE/SAP: Detailed Crab Data From NOAA Fisheries Service 2012 Chukchi Sea Bottom Trawl Surveys

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains detailed crab data collected from the 2012 NOAA/NMFS/AFSC/RACE crab-groundfish bottom trawl survey of the Chukchi Sea. 71 survey stations were...

  19. Research and development of spent-fuel shipping casks and the criteria for sea-going vessels carrying them

    International Nuclear Information System (INIS)

    Aoki, S.; Ando, Y.

    1977-01-01

    Since the transport of spent fuel will increase rapidly and extensively in the near future, the Japanese Atomic Energy Committee enacted the Technical Standard for Transportation of Radioactive Materials, based on the IAEA Regulation for the Safe Transport of Radioactive Materials, 1973 Revised Edition. The authorities concerned have begun to review the former ordinances for transporting radioactive materials and to develop a unified system of relevant laws and standards. For ten years the Atomic Energy Bureau has invested in research and development to obtain data for the design and licence of a spent-fuel shipping cask. Different scale models of a prototype weighing 80t were used to clarify the scale effect of drop, puncture and fire tests, which are a feature of Japanese research and development. Also an immersion test in water at pressures up to about 500 bar is now carried out to investigate the integrity of the cask body and sealing structure to prevent leakage of radioactive contents to the surroundings should the cask fall into deep sea. In Japan, depending on the site of nuclear plants, almost all transport of unirradiated and spent fuels is by sea. Therefore, to secure safe transport, the design criteria of ships for the exclusive transport of spent-fuel shipping casks, namely full-load shipping, have been enacted, which aim to make the likelihood of sinking on collision, stranding, and other unforeseen accidents at sea highly improbable and also to keep radiation exposure of the crew as low as possible. (author)

  20. Quantity and biochemical composition of particulate organic matter in a highly trawled area (Thermaikos Gulf, Eastern Mediterranean Sea

    Directory of Open Access Journals (Sweden)

    Antonio Pusceddu

    2015-11-01

    Full Text Available Bottom trawling represents nowadays one of the most severe anthropogenic disturbances at sea, and determines large impacts on benthic communities and processes. Bottom trawling determines also local sediment resuspension and the effects of the injection of large amounts of surface sediments into the water column have been repeatedly investigated. Few studies have assessed the consequences of sediment resuspension caused by bottom trawling on the quantity, biochemical composition and bioavailability of suspended organic particles and how these eventually rival those exerted by natural storms. To provide insights on this poorly addressed issue, we investigated concentrations and biochemical composition of total and enzymatically digestible pools of particulate organic matter (POM in the Thermaikos Gulf (Mediterranean Sea under calm sea conditions, during intensive trawling activities, and after a severe storm. We show here that sediment resuspension caused by trawling can cause large effects on POM quantity, biochemical composition and bioavailability. Both during trawling and after the storm, the relative importance of the carbohydrate pools increased (in the upper water column and the total lipid concentrations decreased (in the intermediate and bottom layers when compared to values measured during calm conditions. These results would suggest that bottom trawling could inject in the upper water column POM pools more refractory in nature (e.g., carbohydrates than those present in calm or after-storm conditions. By contrast, we show also that the bioavailable fraction of biopolymeric C increased significantly during trawling in the upper water column of the shallowest stations and in the bottom water column layer of the deepest ones. These results provide evidence that bottom trawling can influence the overall trophic status of coastal waters, exerting effects similar or stronger than those caused by natural storms, though of variable amplitude

  1. Gammatography of thick lead vessels

    International Nuclear Information System (INIS)

    Raghunath, V.M.; Bhatnagar, P.K.; Sundaram, V.M.

    1979-01-01

    Radiography, scintillation and GM counting and dose measurements using ionisation chamber equipment are commonly used for detecting flaws/voids in materials. The first method is mostly used for steel vessels and to a lesser extent thin lead vessels also and is essentially qualitative. Dose measuring techniques are used for very thick and large lead vessels for which high strength radioactive sources are required, with its inherent handling problems. For vessels of intermediate thicknesses, it is ideal to use a small strength source and a GM or scintillation counter assembly. At the Reactor Research Centre, Kalpakkam, such a system was used for checking three lead vessels of thicknesses varying from 38mm to 65mm. The tolerances specified were +- 4% variation in lead thickness. The measurements also revealed the non concentricity of one vessel which had a thickness varying from 38mm to 44mm. The second vessel was patently non-concentric and the dimensional variation was truly reproduced in the measurements. A third vessel was fabricated with careful control of dimensions and the measurements exhibited good concentricity. Small deviations were observed, attributable to imperfect bondings between steel and lead. This technique has the following advantages: (a) weaker sources used result in less handling problems reducing the personnel exposures considerably; (b) the sensitivity of the instrument is quite good because of better statistics; (c) the time required for scanning a small vessel is more, but a judicious use of a scintillometer for initial fast scan will help in reducing the total scanning time; (d) this method can take advantage of the dimensional variations themselves to get the calibration and to estimate the deviations from specified tolerances. (auth.)

  2. Bottom trawling and oxygen minimum zone influences on continental slope benthic community structure off Vancouver Island (NE Pacific)

    Science.gov (United States)

    De Leo, Fabio C.; Gauthier, Maéva; Nephin, Jessica; Mihály, Steven; Juniper, S. Kim

    2017-03-01

    Understanding responses of benthic ecosystems to cumulative impacts of natural stressors, long-term ocean change and increasing resource exploitation is an emerging area of interest for marine ecologists and environmental managers. Few, if any, studies have quantitatively addressed cumulative effects in the deep sea. We report here on a study from the continental slope off Vancouver Island (Canada) in the northeast Pacific Ocean, where the Oxygen Minimum Zone impinges on seabed habitats that are subjected to widespread bottom trawling, primarily by the fishery for thornyhead (Sebastolobus ssp.). We examined how the benthic megafauna in this area was influenced by varying levels of dissolved oxygen and trawling activity, along a depth gradient that was also likely to shape community composition. Continuous video and sonar records from two ROV surveys (50 linear km total; depth range 300-1400 m) respectively provided data on faunal attributes (composition, abundance and diversity) and the frequency of trawl door marks on the seabed. Faunal and trawl data were compiled in a geo-referenced database along with corresponding dissolved oxygen data, and pooled into 500 m segments for statistical analysis. Trawl mark occurrence peaked between 500 and 1100 m, corresponding to areas of slope subjected to hypoxia (PERMANOVA analyses, with characterizing taxa identified for all three factors. Depth, dissolved oxygen and trawl mark density accounted for 21% to 52% of the variability in benthic community structure according to multiple regression (DISTLM) models. Species richness was highest at intermediate depths and in areas subject to intermediate levels of trawling, and higher under hypoxia than under severe hypoxia. These statistically significant trends demonstrate that the structuring influences of bottom trawling on deep-sea benthic communities can be observed even where communities are being shaped by strong environmental gradients.

  3. Research on friction coefficient of nuclear Reactor Vessel Internals Hold Down Spring: Stress coefficient test analysis method

    International Nuclear Information System (INIS)

    Linjun, Xie; Guohong, Xue; Ming, Zhang

    2016-01-01

    Graphical abstract: HDS stress coefficient test apparatus. - Highlights: • This paper performs mathematic deduction to the physical model of Hold Down Spring (HDS), establishes a mathematic model of axial load P and stress, stress coefficient and friction coefficient and designs a set of test apparatuses for simulating the pretightening process of the HDS for the first time according to a model similarity criterion. • The mathematical relation between the load and the strain is obtained about the HDS, and the mathematical model of the stress coefficient and the friction coefficient is established. So, a set of test apparatuses for obtaining the stress coefficient is designed according to the model scaling criterion and the friction coefficient of the K1000 HDS is calculated to be 0.336 through the obtained stress coefficient. • The relation curve between the theoretical load and the friction coefficient is obtained through analysis and indicates that the change of the friction coefficient f would influence the pretightening load under the condition of designed stress. The necessary pretightening load in the design process is calculated to be 5469 kN according to the obtained friction coefficient. Therefore, the friction coefficient and the pretightening load under the design conditions can provide accurate pretightening data for the analysis and design of the reactor HDS according to the operations. - Abstract: This paper performs mathematic deduction to the physical model of Hold Down Spring (HDS), establishes a mathematic model of axial load P and stress, stress coefficient and friction coefficient and designs a set of test apparatuses for simulating the pretightening process of the HDS for the first time according to a model similarity criterion. By carrying out tests and researches through a stress testing technique, P–σ curves in loading and unloading processes of the HDS are obtained and the stress coefficient k f of the HDS is obtained. So, the

  4. Research on friction coefficient of nuclear Reactor Vessel Internals Hold Down Spring: Stress coefficient test analysis method

    Energy Technology Data Exchange (ETDEWEB)

    Linjun, Xie, E-mail: linjunx@zjut.edu.cn [College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014 (China); Guohong, Xue; Ming, Zhang [Shanghai Nuclear Engineering Research & Design Institute, Shanghai 200233 (China)

    2016-08-01

    Graphical abstract: HDS stress coefficient test apparatus. - Highlights: • This paper performs mathematic deduction to the physical model of Hold Down Spring (HDS), establishes a mathematic model of axial load P and stress, stress coefficient and friction coefficient and designs a set of test apparatuses for simulating the pretightening process of the HDS for the first time according to a model similarity criterion. • The mathematical relation between the load and the strain is obtained about the HDS, and the mathematical model of the stress coefficient and the friction coefficient is established. So, a set of test apparatuses for obtaining the stress coefficient is designed according to the model scaling criterion and the friction coefficient of the K1000 HDS is calculated to be 0.336 through the obtained stress coefficient. • The relation curve between the theoretical load and the friction coefficient is obtained through analysis and indicates that the change of the friction coefficient f would influence the pretightening load under the condition of designed stress. The necessary pretightening load in the design process is calculated to be 5469 kN according to the obtained friction coefficient. Therefore, the friction coefficient and the pretightening load under the design conditions can provide accurate pretightening data for the analysis and design of the reactor HDS according to the operations. - Abstract: This paper performs mathematic deduction to the physical model of Hold Down Spring (HDS), establishes a mathematic model of axial load P and stress, stress coefficient and friction coefficient and designs a set of test apparatuses for simulating the pretightening process of the HDS for the first time according to a model similarity criterion. By carrying out tests and researches through a stress testing technique, P–σ curves in loading and unloading processes of the HDS are obtained and the stress coefficient k{sub f} of the HDS is obtained. So, the

  5. Immunological quality and performance of tumor vessel-targeting CAR-T cells prepared by mRNA-EP for clinical research.

    Science.gov (United States)

    Inoo, Kanako; Inagaki, Ryo; Fujiwara, Kento; Sasawatari, Shigemi; Kamigaki, Takashi; Nakagawa, Shinsaku; Okada, Naoki

    2016-01-01

    We previously reported that tumor vessel-redirected T cells, which were genetically engineered with chimeric antigen receptor (CAR) specific for vascular endothelial growth factor receptor 2 (VEGFR2), demonstrated significant antitumor effects in various murine solid tumor models. In the present study, we prepared anti-VEGFR2 CAR-T cells by CAR-coding mRNA electroporation (mRNA-EP) and analyzed their immunological characteristics and functions for use in clinical research. The expression of anti-VEGFR2 CAR on murine and human T cells was detected with approximately 100% efficiency for a few days, after peaking 6-12 hours after mRNA-EP. Triple transfer of murine anti-VEGFR2 CAR-T cells into B16BL6 tumor-bearing mice demonstrated an antitumor effect comparable to that for the single transfer of CAR-T cells engineered with retroviral vector. The mRNA-EP did not cause any damage or defects to human T-cell characteristics, as determined by viability, growth, and phenotypic parameters. Additionally, two kinds of human anti-VEGFR2 CAR-T cells, which expressed different CAR construction, differentiated to effector phase with cytokine secretion and cytotoxic activity in antigen-specific manner. These results indicate that our anti-VEGFR2 CAR-T cells prepared by mRNA-EP have the potential in terms of quality and performance to offer the prospect of safety and efficacy in clinical research as cellular medicine.

  6. Improving the effectiveness of escape windows in directed Norway lobster Nephrops norvegicus trawl fisheries

    DEFF Research Database (Denmark)

    Madsen, Niels; Holst, René; Frandsen, Rikke

    2012-01-01

    A substantial improvement in the bycatch selectivity of Norway lobster Nephrops norvegicus trawls is required, particularly with respect to cod Gadus morhua , whose stocks are at low levels in several areas. Conventional escape windows are not adequate to properly release cod and other bycatch...... species caught in the trawls. To address this issue, we developed a novel sorting box concept consisting of a four-panel section with a window on the top in order to improve the escape of cod and other bycatch species through an escape window while retaining the target catch of Norway lobster. The concept....... The reduction in bycatch decreased with decreasing mesh size and increasing height of the sorting box. Escape of Norway lobster through the escape window was limited. A modified version of the sorting box concept was implemented in the Kattegat fishery from 2009 onwards...

  7. Comparative distribution of the fan mussel Atrina fragilis (Bivalvia, Pinnidae in protected and trawled areas of the north Aegean Sea (Thermaikos Gulf

    Directory of Open Access Journals (Sweden)

    K. FRYGANIOTIS

    2013-02-01

    Full Text Available The distribution of the fan mussel Atrina fragilis was studied at two contrasting areas of the north Aegean Sea (Thermaikos Gulf: one routinely trawled and one closed to trawlers for over 25 years. Significant differences were detected between the two areas with decreased values in density and size of A. fragilis individuals at the trawled area. As habitat differences, i.e. sediment composition and bathymetry, had non-significant effect, extensive trawling activities probably explain the observed results.

  8. Erratum: Google Earth as Geoscience Data Browser Project: Development of a Tool to Convert JAMSTEC Research Vessel Navigation Data to KML [Data Science Journal, Volume 8, 30 March 2009. S85-S91

    Directory of Open Access Journals (Sweden)

    Y Yamagishi

    2009-07-01

    Full Text Available The following PDF indicates errata for the original article entitled "Google Earth as Geoscience Data Browser Project: Development of a Tool to Convert JAMSTEC Research Vessel Navigation Data to KML" by Y Yamagishi, H Nagao, K Suzuki, H Tamura, T Hatakeyama, H Yanaka and S Tsuboi.

  9. LopheliaII2012: Coral Research on Oil Rigs in the Gulf of Mexico on TDI-Brooks Vessel Brooks McCall between 2012-07-12 and 2012-07-24

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The final year of a multi-year effort to study Lophelia coral communities in the Gulf of Mexico is occurring on the TDI-Brooks research vessel, Brooks McCall,...

  10. A knowledge platform to inform on the effects of trawling on benthic communities

    Science.gov (United States)

    Muntadas, Alba; Lample, Michel; Demestre, Montserrat; Ballé-Béganton, Johanna; de Juan, Silvia; Maynou, Francesc; Bailly, Denis

    2018-02-01

    For a successful implementation of an Ecosystem Approach to Fisheries (EAF) management, it is necessary that all stakeholders involved in fisheries management are aware of the implications of fishing impacts on ecosystems and agree with the adopted measures to mitigate these impacts. In this context, there is a need for tools to share knowledge on the ecosystem effects of fisheries among these stakeholders. When managing bottom trawl fisheries under an EAF framework, one of the main concerns is the direct and indirect consequences of trawling impacts on benthic ecosystems. We developed a platform using the ExtendSim® software with a user-friendly interface that combines a simulation model based on existing knowledge, data collection and representation of predicted trawling impacts on the seabed. The platform aims to be a deliberation support tool for fisheries' stakeholders and, simultaneously, raise public awareness of the need for good benthic community knowledge to appropriately inform EAF management plans. The simulation procedure assumes that trawling affects benthic communities with an intensity that depends on the level of fishing effort exerted on benthic communities and on the habitat characteristics (i.e. sediment grain size). Data to build the simulation comes from epifaunal samples from 18 study sites located in Mediterranean continental shelves subjected to different levels of fishing effort. In this work, we present the simulation outputs of a 50% fishing effort increase (and decrease) in four of the study sites which cover different habitats and different levels of fishing effort. We discuss the platform strengths and weaknesses and potential future developments.

  11. Use of high-frequency imaging sonar (DIDSON) to observe fish behaviour towards a surface trawl

    Czech Academy of Sciences Publication Activity Database

    Rakowitz, G.; Tušer, Michal; Říha, Milan; Jůza, Tomáš; Balk, H.; Kubečka, Jan

    2012-01-01

    Roč. 123, July (2012), s. 37-48 ISSN 0165-7836. [Fish Sampling with Active Methods. České Budějovice, 08.09.2010-11.09.2010] R&D Projects: GA ČR(CZ) GA206/07/1392 Grant - others:NFM(CZ) CZ 0091 Institutional support: RVO:60077344 Keywords : active sampling gear * trawl * fish avoidance behaviour * DIDSON * freshwater reservoir Subject RIV: EH - Ecology, Behaviour Impact factor: 1.695, year: 2012

  12. Hydrodynamic characteristics of the oval cambered double slotted otter board in bottom trawl fisheries

    Science.gov (United States)

    Liu, J.; Huang, H. L.; Li, L. Z.; Qu, T. C.; Wu, Y.; Chen, S.; Yang, J. L.; Rao, X.

    2017-07-01

    The otter board is one of the main components of single boat trawl fisheries. An oval cambered double slotted otter board was developed for improving the expansion performance of trawl net in bottom trawl fisheries. A flume model experiment was conducted to measure the lift coefficient (C L), drag coefficient (C D), and lift to drag ratio (K) in different angles of attack (α). The experimental results are as follows : (1) The C L and K value show a trend of increasing at the beginning and then decreasing with the increase of angle of attack, the C D value reflects an upward trend as the angle of attack increases; (2) The D3 otter board (front flow deflector angle at 29°) showed a better hydrodynamic performance. When α=30°, the max lift coefficient (C Lmax) was 1.464, in this case C D = 0.554 and K=2.643. When α=15°, the max lift to drag ratio (K max) was 4.165, C L =0.633, and C D = 0.152. This suggests that the best working scope for the angle of attack is between 15°~30°, in which case, C L>0.633 and K>2.643. The mean value of the lift coefficient was 1.071 and the mean of the lift to drag ratio was 3.482. Comparative analysis of the hydrodynamic performance of different types of otter boards showed that the D3 otter board both had good expansion performance and efficiency, which can provide a reference basis for further optimization of the bottom trawl otter board.

  13. Identification and evaluation of shark bycatch in Georgia's commercial shrimp trawl fishery with implications for management

    Science.gov (United States)

    Belcher, C.N.; Jennings, C.A.

    2011-01-01

    Many US states have recreational and commercial fisheries that occur in nursery areas occupied by subadult sharks and can potentially affect their survival. Georgia is one of few US states without a directed commercial shark fishery, but the state has a large, nearshore penaeid shrimp trawl fishery in which small sharks occur as bycatch. During our 1995–1998 investigation of bycatch in fishery-dependent sampling events, 34% of 127 trawls contained sharks. This bycatch totalled 217 individuals from six species, with Atlantic sharpnose shark, Rhizoprionodon terraenovae (Richardson), the most common and finetooth shark, Carcharhinus isodon (Müller & Henle) and spinner shark, Carcharhinus brevipinna (Müller & Henle), the least common. The highest catch rates for sharks occurred during June and July and coincided with the peak months of the pupping season for many species. Trawl tow speed and tow time did not significantly influence catch rates for shark species. Gear configurations [net type, turtle excluder device (TED), bycatch reduction device] affected catch rates for shark species. Results of this study indicate gear restrictions, a delayed season opening, or reduced bar spacing on TEDs may reduce shark bycatch in this fishery.

  14. The footprint of bottom trawling in European waters: distribution, intensity, and seabed integrity

    DEFF Research Database (Denmark)

    Eigaard, Ole Ritzau; Bastardie, Francois; Hinzen, N.T.

    2017-01-01

    for 2010-2012 at a grid cell resolution of 1 x 1 min longitude and latitude. Trawling intensity profiles with seabed impact at the surface and subsurface level are presented for 14 management areas in the North-east Atlantic, Baltic Sea and Mediterranean Sea. The footprint of the management areas ranged...... between 53-99% and 6-94% for the depth zone from 0 to 200 m (Shallow) and from 201 to 1000 m (Deep), respectively. The footprint was estimated as the total area of all grid cells that were trawled fully or partially. Excluding the untrawled proportions reduced the footprint estimates to 28-85% and 2......-77%. Largest footprints per unit landings were observed off Portugal and in the Mediterranean Sea. Mean trawling intensity ranged between 0.5 and 8.5 times per year, but was less in the Deep zone with a maximum intensity of 6.4. Highest intensities were recorded in the Skagerrak-Kattegat, Iberian Portuguese...

  15. Multiple shell pressure vessel

    International Nuclear Information System (INIS)

    Wedellsborg, B.W.

    1988-01-01

    A method is described of fabricating a pressure vessel comprising the steps of: attaching a first inner pressure vessel having means defining inlet and outlet openings to a top flange, placing a second inner pressure vessel, having means defining inlet and outlet opening, concentric with and spaced about the first inner pressure vessel and attaching the second inner pressure vessel to the top flange, placing an outer pressure vessel, having inlet and outlet openings, concentric with and spaced apart about the second inner pressure vessel and attaching the outer pressure vessel to the top flange, attaching a generally cylindrical inner inlet conduit and a generally cylindrical inner outlet conduit respectively to the inlet and outlet openings in the first inner pressure vessel, attaching a generally cylindrical outer inlet conduit and a generally cylindrical outer outlet conduit respectively to the inlet and outlet opening in the second inner pressure vessel, heating the assembled pressure vessel to a temperature above the melting point of a material selected from the group, lead, tin, antimony, bismuth, potassium, sodium, boron and mixtures thereof, filling the space between the first inner pressure vessel and the second inner pressure vessel with material selected from the group, filling the space between the second inner pressure vessel and the outer pressure vessel with material selected from the group, and pressurizing the material filling the spaces between the pressure vessels to a predetermined pressure, the step comprising: pressurizing the spaces to a pressure whereby the wall of the first inner pressure vessel is maintained in compression during steady state operation of the pressure vessel

  16. Use of Zircaloy 4 material for the pressure vessels of hot and cold neutron sources and beam tubes for research reactors

    International Nuclear Information System (INIS)

    Scheuer, A.; Gutsmiedl, E.

    1999-01-01

    The material Zircaloy 4 can be used for the pressure retaining walls for the cold and hot neutron sources and beam tubes. For the research reactor FRM-II of the Technical University Munich, Germany, the material Zircaloy 4 were chosen for the vessels of the cold and hot neutron source and for the beam tube No. 6. The sheets and forgings of Zircaloy 4 were examined in the temperature range between -256 deg. C and 250 deg. C. The thickness of the sheets are 3, 4, 5 and 10 mm, the maximum diameter of the forgings was 560 mm. This great forging diameters are not be treated in the ASTM rule B 351 for nuclear material, so a special approval with independent experts was necessary. The requirements for the material examinations were specified in a material specification and material test sheets which based on the ASTM rules B 351 and B 352 with additional restriction and additional requirements of the basic safety concept for nuclear power plants in Germany, which was take into consideration in the nuclear licensing procedure. Charpy-V samples were carried out in the temperature range between -256 deg. C and 150 deg. C to get more information on the ductile behaviour of the Zircaloy 4. The results of the sheet examination confirm the requirements of the specifications, the results of the forging examination in the tangential testing direction are lower than specified and expected for the tensile strength. The axial and transverse values confirm the specification requirements. For the strength calculation of the pressure retaining wall a reduced material value for the forgings has to take into consideration. The material behaviour of Zircaloy 4 under irradiation up to a fluence of ∼ 1x10 22 n/cm 2 was investigated. The loss of ductility was determined. As an additional criteria the variation of the fracture toughness was studies. Fracture mechanic calculations of the material were carried out in the licensing procedure with the focus to fulfill the leak before rupture

  17. Use of Zircaloy 4 material for the pressure vessels of hot and cold neutron sources and beam tubes for research reactors

    International Nuclear Information System (INIS)

    Gutsmiedl, Erwin

    2001-01-01

    The material Zircaloy 4 can be used for the pressure retaining walls for the cold and hot neutron sources and beam tubes. For the research reactor FRM-II of the Technical University Munich, Germany, the material Zircaloy 4 were chosen for the vessels of the cold and hot neutron source and for the beam tube No. 6. The sheets and forgings of Zircaloy 4 were examined in the temperature range between -256degC and 250degC. The thickness of the sheets are 3, 4, 5 and 10 mm, the maximum diameter of the forgings was 560 mm. This great forging diameters are not be treated in the ASTM rule B 351 for nuclear material, so a special approval with independent experts was necessary. The requirements for the material examinations were specified in a material specification and material test sheets which based on the ASTM rules B 351 and B 352 with additional restriction and additional requirements of the basic safety concept for nuclear power plants in Germany, which was taken into consideration in the nuclear licensing procedure. Charpy-V samples were carried out in the temperature range between -256degC and 150degC to get more information on the ductile behaviour of the Zircaloy 4. The results of the sheet examination confirm the requirements of the specifications, the results of the forging examination in the tangential testing direction are lower than specified and expected for the tensile strength. The axial and transverse values confirm the specification requirements. For the strength calculation of the pressure retaining wall a reduced material value for the forgings has to taken into consideration. The material behaviour of Zircaloy 4 under irradiation up to a fluence of ∼1·10 22 n/cm 2 was investigated. The loss of ductility was determined. As an additional criteria the variation of the fracture toughness was studies. Fracture mechanic calculations of the material were carried out in the licensing procedure with the focus to fulfill the leak before rupture criteria of

  18. 76 FR 59064 - Fisheries of the Exclusive Economic Zone Off Alaska; Shallow-Water Species by Vessels Using Trawl...

    Science.gov (United States)

    2011-09-23

    .... 101126522-0640-02] RIN 0648-XA722 Fisheries of the Exclusive Economic Zone Off Alaska; Shallow- Water... closure. SUMMARY: NMFS is opening directed fishing for shallow-water species by [[Page 59065

  19. Immunological quality and performance of tumor vessel-targeting CAR-T cells prepared by mRNA-EP for clinical research

    Directory of Open Access Journals (Sweden)

    Kanako Inoo

    2016-01-01

    Full Text Available We previously reported that tumor vessel-redirected T cells, which were genetically engineered with chimeric antigen receptor (CAR specific for vascular endothelial growth factor receptor 2 (VEGFR2, demonstrated significant antitumor effects in various murine solid tumor models. In the present study, we prepared anti-VEGFR2 CAR-T cells by CAR-coding mRNA electroporation (mRNA-EP and analyzed their immunological characteristics and functions for use in clinical research. The expression of anti-VEGFR2 CAR on murine and human T cells was detected with approximately 100% efficiency for a few days, after peaking 6–12 hours after mRNA-EP. Triple transfer of murine anti-VEGFR2 CAR-T cells into B16BL6 tumor-bearing mice demonstrated an antitumor effect comparable to that for the single transfer of CAR-T cells engineered with retroviral vector. The mRNA-EP did not cause any damage or defects to human T-cell characteristics, as determined by viability, growth, and phenotypic parameters. Additionally, two kinds of human anti-VEGFR2 CAR-T cells, which expressed different CAR construction, differentiated to effector phase with cytokine secretion and cytotoxic activity in antigen-specific manner. These results indicate that our anti-VEGFR2 CAR-T cells prepared by mRNA-EP have the potential in terms of quality and performance to offer the prospect of safety and efficacy in clinical research as cellular medicine.

  20. From Fishing to Fish Processing: Separation of Fish from Crustaceans in the Norway Lobster-Directed Multispecies Trawl Fishery Improves Seafood Quality.

    Directory of Open Access Journals (Sweden)

    Junita D Karlsen

    Full Text Available Fishing gears have negative impacts on seafood quality, especially on fish in the mixed trawl fishery targeting Norway lobster (Nephrops norvegicus. In this fishery, which is worth about €80 millions in Denmark alone, the quality of fish can be significantly improved by simple gear changes. A trawl codend divided into an upper and lower codend was designed to separate fish from Norway lobster during the fishing process by encourage fish to swim into the upper codend by using a frame at the entrance of the lower codend. Separate codends for fish and Norway lobster in the same gear provide the opportunity to selectively reduce small low-value fish, which will reduce catch weight and sorting time onboard the vessel. For this horizontally divided test codend and a standard codend, in which the catch was mixed, quality assessments were performed on the same batches of fish during three steps of the value chain: i aboard the fishing vessel; ii at the Fishermen's Collection Central, and iii in the production plant. Four species of fish and fillets from fish caught in the upper codend of the test codend were of significantly better quality for several of the assessed parameters compared with those caught in the standard codend: i newly caught fish showed significantly less scale loss and discolourations and had significantly better texture; ii landed fish had significantly better skin appearance and texture and significantly fewer discolourations; and iii fillets showed significantly fewer blood spots and had significantly better texture. There were no differences in injuries for newly caught fish or gaping and bruises for fillets between the test and standard codends. The decrease in catch-related damages in the test codend is explained by little contact between fish and animals with hard or spiny surfaces due to successful separation of fish and Norway lobster into the upper and lower codends, respectively, and by lower catch weight in the upper

  1. Probabilistic retinal vessel segmentation

    Science.gov (United States)

    Wu, Chang-Hua; Agam, Gady

    2007-03-01

    Optic fundus assessment is widely used for diagnosing vascular and non-vascular pathology. Inspection of the retinal vasculature may reveal hypertension, diabetes, arteriosclerosis, cardiovascular disease and stroke. Due to various imaging conditions retinal images may be degraded. Consequently, the enhancement of such images and vessels in them is an important task with direct clinical applications. We propose a novel technique for vessel enhancement in retinal images that is capable of enhancing vessel junctions in addition to linear vessel segments. This is an extension of vessel filters we have previously developed for vessel enhancement in thoracic CT scans. The proposed approach is based on probabilistic models which can discern vessels and junctions. Evaluation shows the proposed filter is better than several known techniques and is comparable to the state of the art when evaluated on a standard dataset. A ridge-based vessel tracking process is applied on the enhanced image to demonstrate the effectiveness of the enhancement filter.

  2. Improvement to reactor vessel

    International Nuclear Information System (INIS)

    1974-01-01

    The vessel described includes a prestressed concrete vessel containing a chamber and a removable cover closing this chamber. The cover is in concrete and is kept in its closed position by main and auxiliary retainers, comprising fittings integral with the concrete of the vessel. The auxiliary retainers pass through the concrete of the cover. This improvement may be applied to BWR, PWR and LMFBR type reactor vessel [fr

  3. ALICE HMPID Radiator Vessel

    CERN Document Server

    2003-01-01

    View of the radiator vessels of the ALICE/HMPID mounted on the support frame. Each HMPID module is equipped with 3 indipendent radiator vessels made out of neoceram and fused silica (quartz) windows glued together. The spacers inside the vessel are needed to stand the hydrostatic pressure. http://alice-hmpid.web.cern.ch/alice-hmpid

  4. AFSC/RACE/EcoFOCI - Trawl catch data collected in support of FOCI assessment surveys and ecosystem observations in the Bering Sea and the Gulf of Alaska 1993 to Present

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The trawl database contains multiple tables of data. The ‘haul’ table contains the location, date, time and depth of the trawl haul. The ‘catch’ table contains the...

  5. Monitoring cod catches of the Dutch demersal fleet in 2016

    NARCIS (Netherlands)

    Hal, van R.; Machiels, M.A.M.

    2017-01-01

    This report presents the results of the cod monitoring program 2016. The research was commissioned by the Dutch Ministry of Economic Affairs within the EZ-program Beleidsondersteunend Onderzoek. Cod catches of the vessels in the fleet segments BT2 (beam trawl and pulse trawl) and TR (otter trawls

  6. Prenatal stress from trawl capture affects mothers and neonates: a case study using the southern fiddler ray (Trygonorrhina dumerilii)

    Science.gov (United States)

    Guida, L.; Awruch, C.; Walker, T. I.; Reina, R. D.

    2017-04-01

    Assessing fishing effects on chondrichthyan populations has predominantly focused on quantifying mortality rates. Consequently, sub-lethal effects of capture stress on the reproductive capacity of chondrichthyans are largely unknown. We investigated the reproductive consequences of capture on pregnant southern fiddler rays (Trygonorrhina dumerilii) collected from Swan Bay, Australia, in response to laboratory-simulated trawl capture (8 h) followed immediately by air exposure (30 min). Immediately prior to, and for up to 28 days post trawling, all females were measured for body mass (BM), sex steroid concentrations (17-β estradiol, progesterone, testosterone) and granulocyte to lymphocyte (G:L) ratio. At parturition, neonates were measured for total length (TL), BM and G:L ratio. Trawling reduced maternal BM and elevated the G:L ratio for up to 28 days. Trawling did not significantly affect any sex steroid concentrations relative to controls. Neonates from trawled mothers were significantly lower in BM and TL than control animals, and had an elevated G:L ratio. Our results show that capture of pregnant T. dumerilii can influence their reproductive potential and affect the fitness of neonates. We suggest other viviparous species are likely to be similarly affected. Sub-lethal effects of capture, particularly on reproduction, require further study to improve fisheries management and conservation of chondrichthyans.

  7. Stress analysis of pressure vessels

    International Nuclear Information System (INIS)

    Kim, B.K.; Song, D.H.; Son, K.H.; Kim, K.S.; Park, K.B.; Song, H.K.; So, J.Y.

    1979-01-01

    This interim report contains the results of the effort to establish the stress report preparation capability under the research project ''Stress analysis of pressure vessels.'' 1978 was the first year in this effort to lay the foundation through the acquisition of SAP V structural analysis code and a graphic terminal system for improved efficiency of using such code. Software programming work was developed in pre- and post processing, such as graphic presentation of input FEM mesh geometry and output deformation or mode shope patterns, which was proven to be useful when using the FEM computer code. Also, a scheme to apply fracture mechanics concept was developed in fatigue analysis of pressure vessels. (author)

  8. Research on the water hammer protection of the long distance water supply project with the combined action of the air vessel and over-pressure relief valve

    International Nuclear Information System (INIS)

    Li, D D; Jiang, J; Zhao, Z; Yi, W S; Lan, G

    2013-01-01

    We take a concrete pumping station as an example in this paper. Through the calculation of water hammer protection with a specific pumping station water supply project, and the analysis of the principle, mathematical models and boundary conditions of air vessel and over-pressure relief valve we show that the air vessel can protect the water conveyance system and reduce the transient pressure damage due to various causes. Over-pressure relief valve can effectively reduce the water hammer because the water column re-bridge suddenly stops the pump and prevents pipeline burst. The paper indicates that the combination set of air vessel and over-pressure relief valve can greatly reduce the quantity of the air valve and can eliminate the water hammer phenomenon in the pipeline system due to the vaporization and water column separation and re-bridge. The conclusion could provide a reference for the water hammer protection of long-distance water supply system

  9. Research on the water hammer protection of the long distance water supply project with the combined action of the air vessel and over-pressure relief valve

    Science.gov (United States)

    Li, D. D.; Jiang, J.; Zhao, Z.; Yi, W. S.; Lan, G.

    2013-12-01

    We take a concrete pumping station as an example in this paper. Through the calculation of water hammer protection with a specific pumping station water supply project, and the analysis of the principle, mathematical models and boundary conditions of air vessel and over-pressure relief valve we show that the air vessel can protect the water conveyance system and reduce the transient pressure damage due to various causes. Over-pressure relief valve can effectively reduce the water hammer because the water column re-bridge suddenly stops the pump and prevents pipeline burst. The paper indicates that the combination set of air vessel and over-pressure relief valve can greatly reduce the quantity of the air valve and can eliminate the water hammer phenomenon in the pipeline system due to the vaporization and water column separation and re-bridge. The conclusion could provide a reference for the water hammer protection of long-distance water supply system.

  10. Development of Catamaran Fishing Vessel

    Directory of Open Access Journals (Sweden)

    A. Jamaluddin

    2010-11-01

    Full Text Available Multihull due to a couple of advantages has been the topic of extensive research work in naval architecture. In this study, a series of investigation of fishing vessel to save fuel energy was carried out at ITS. Two types of ship models, monohull (round bilge and hard chine and catamaran, a boat with two hulls (symmetrical and asymmetrical were developed. Four models were produced physically and numerically, tested (towing tank and simulated numerically (CFD code. The results of the two approaches indicated that the catamaran mode might have drag (resistance smaller than those of monohull at the same displacement. A layout of catamaran fishing vessel, proposed here, indicates the freedom of setting the deck equipments for fishing vessel.

  11. Improving the selectivity of beam trawls in The Netherlands: the effect of large mesh top panels on the catch rates of sole, plaice, cod and whiting

    NARCIS (Netherlands)

    Marlen, van B.

    2003-01-01

    This paper presents the results of experiments aimed to improve the selectivity of beam trawls in the North Sea for roundfish whilst minimizing losses on target flatfish. Large-meshed top panels were designed for the tickler chain type of beam trawls used in this fishery. The design process involved

  12. A comparison between benthic gillnet and bottom trawl for assessing fish assemblages in a shallow eutrophic lake near the Changjiang River estuary

    Science.gov (United States)

    Li, Yalei; Liu, Qigen; Chen, Liping; Zhao, Liangjie; Wu, Hao; Chen, Liqiao; Hu, Zhongjun

    2018-03-01

    Two fishing methods including gillnetting and trawling to estimate attributes of fish assemblage were compared in Dianshan Lake from August 2009 to July 2010. Species composition differed significantly between the gears, with four significant contributors in gillnet catches and one in trawl catches. Trawling collected more proportions of benthic species by number and biomass than gillnetting. Size distribution was significantly influenced by fishing technique; gillnetting captured relatively less small-sized fishes and trawling captured less large-sized individuals. Trawling produced species richness closer to the one expected than gillnetting. On the whole, trawl catch was a quadratic polynomial function of gillnet catch and a significantly negative correlation was found between them, both of which varied as different polynomial functions of temperature. However, trawl and gillnet catches were significantly correlated only in one of five month groups. It is concluded that single-gear-based surveys can be misleading in assessments of attributes of fish assemblages, bottom trawling is a more effective gear for assessing fish diversity than benthic gillnetting, and using gillnet catches as an indicator of fish density depends on fishing season in the lake.

  13. Bell-shaped size selection in a bottom trawl: A case study for Nephrops directed fishery with reduced catches of cod

    DEFF Research Database (Denmark)

    Lövgren, Johan; Herrmann, Bent; Feekings, Jordan P.

    2016-01-01

    and size selectivity have motivated the development of selective systems in trawl fisheries that utilize more than one selective device simultaneously. An example can be found in the Swedish demersal trawl fishery targeting Norway lobster (Nephrops norvegicus), which simultaneously aims at avoiding catches...

  14. Fisheries research and monitoring activities of the Lake Erie Biological Station, 2014

    Science.gov (United States)

    Bodamer Scarbro, Betsy L.; Edwards, William; Gawne, Carrie; Kocovsky, Patrick M.; Kraus, Richard T.; Rogers, Mark W.; Stewart, Taylor

    2015-01-01

    dominant by biomass. Age-2+ Yellow Perch and White Perch diets from our western basin trawl had highest occurrences of benthic invertebrates in spring and fall. Hexagenia spp. accounted for >25% of Yellow Perch and White Perch diet composition (dry weight) in spring. We conducted an analysis using data from the past 6 years of our East Harbor survey to determine to what degree our new research vessel and trawl is affecting our ability to detect trends across the 50+ year time series. We also evaluated trends in water temperatue, dissolved oxygen, secchi depth and total Phosphorus from our LTLA sites near Vermilion, Ohio. Within the following report sections, we describe specific results from our primary surveys conducted in 2014.

  15. Argonne Liquid-Metal Advanced Burner Reactor : components and in-vessel system thermal-hydraulic research and testing experience - pathway forward.

    Energy Technology Data Exchange (ETDEWEB)

    Kasza, K.; Grandy, C.; Chang, Y.; Khalil, H.; Nuclear Engineering Division

    2007-06-30

    This white paper provides an overview and status report of the thermal-hydraulic nuclear research and development, both experimental and computational, conducted predominantly at Argonne National Laboratory. Argonne from the early 1970s through the early 1990s was the Department of Energy's (DOE's) lead lab for thermal-hydraulic development of Liquid Metal Reactors (LMRs). During the 1970s and into the mid-1980s, Argonne conducted thermal-hydraulic studies and experiments on individual reactor components supporting the Experimental Breeder Reactor-II (EBR-II), Fast Flux Test Facility (FFTF), and the Clinch River Breeder Reactor (CRBR). From the mid-1980s and into the early 1990s, Argonne conducted studies on phenomena related to forced- and natural-convection thermal buoyancy in complete in-vessel models of the General Electric (GE) Prototype Reactor Inherently Safe Module (PRISM) and Rockwell International (RI) Sodium Advanced Fast Reactor (SAFR). These two reactor initiatives involved Argonne working closely with U.S. industry and DOE. This paper describes the very important impact of thermal hydraulics dominated by thermal buoyancy forces on reactor global operation and on the behavior/performance of individual components during postulated off-normal accident events with low flow. Utilizing Argonne's LMR expertise and design knowledge is vital to the further development of safe, reliable, and high-performance LMRs. Argonne believes there remains an important need for continued research and development on thermal-hydraulic design in support of DOE's and the international community's renewed thrust for developing and demonstrating the Global Nuclear Energy Partnership (GNEP) reactor(s) and the associated Argonne Liquid Metal-Advanced Burner Reactor (LM-ABR). This white paper highlights that further understanding is needed regarding reactor design under coolant low-flow events. These safety-related events are associated with the transition

  16. The vertical separation of fish in the aft end of a demersal trawl

    DEFF Research Database (Denmark)

    Krag, Ludvig Ahm; Holst, René; Madsen, Niels

    2009-01-01

    and to compare the performance of the two frames. The vertical distribution of cod in the aft end of the trawl was close to uniform, whereas haddock (Melanogrammus aeglefinus), whiting (Merlangius merlangus), plaice (Pleuronectes platessa), and lemon sole (Microstomus kitt) showed more uneven distributions....... The use of guiding bars in the separator frame significantly (p lemon sole in the upper compartment. The vertical separation of cod was density-dependent; high densities of fish resulted in a more uniform distribution of cod. The species separations found...

  17. Determining the impacts of trawling on benthic function in European waters : a biological traits approach

    DEFF Research Database (Denmark)

    Bolam, Stefan; Kenny, Andrew; Garcia, Clement

    characteristics, have allowed us to better understand the interactions between the benthic fauna and their environment at a functional level. We present the initial findings of work conducted under the auspices of the EU-funded project ‘BENTHIS’ which aims to improve our understanding of the impacts of trawling...... on benthic ecosystem functioning over much larger spatial scales than previously undertaken. Biological traits information from 887 stations across European waters (Norwegian, UK, Belgian, Dutch, Danish waters, the Mediterranean and Black Sea) were analysed to: i) quantify the relationships between infaunal...

  18. Influence of fleet renewal and trawl development on landings per unit effort of the Danish northern shrimp (Pandalus borealis) fishery

    DEFF Research Database (Denmark)

    Eigaard, Ole Ritzau; Munch-Petersen, Sten

    2011-01-01

    Recent stock assessments of the Pandalus stock in the Skagerrak (ICES Division IIIa) and the Norwegian Deep (Division IVa east) have relied largely on a time-series of landings per unit effort (lpue) calculated from Danish logbook data. Because of fleet renewal and trawl-size changes, the relatio......Recent stock assessments of the Pandalus stock in the Skagerrak (ICES Division IIIa) and the Norwegian Deep (Division IVa east) have relied largely on a time-series of landings per unit effort (lpue) calculated from Danish logbook data. Because of fleet renewal and trawl-size changes...

  19. Fish Catch Composition of Artisanal and Bottom Trawl Fisheries in ...

    African Journals Online (AJOL)

    1Kenya Marine and Fisheries Research Institute, PO Box 81651 – 80100, Mombasa, Kenya;. 2University ... bay dates back to the 9th century, coinciding with the rise ... Bay remains under review. Initiatives to ..... be less selective than artisanal gear (i.e. higher. S and H' .... sufficient attention, and their testing and successful ...

  20. Enhanced tropospheric BrO over Antarctic sea ice in mid winter observed by MAX-DOAS on board the research vessel Polarstern

    Directory of Open Access Journals (Sweden)

    T. Wagner

    2007-06-01

    Full Text Available We present Multi AXis-Differential Optical Absorption Spectroscopy (MAX-DOAS observations of tropospheric BrO carried out on board the German research vessel Polarstern during the Antarctic winter 2006. Polarstern entered the area of first year sea ice around Antarctica on 24 June 2006 and stayed within this area until 15 August 2006. For the period when the ship cruised inside the first year sea ice belt, enhanced BrO concentrations were almost continuously observed. Outside the first year sea ice belt, typically low BrO concentrations were found. Based on back trajectory calculations we find a positive correlation between the observed BrO differential slant column densities (ΔSCDs and the duration for which the air masses had been in contact with the sea ice surface prior to the measurement. While we can not completely rule out that in several cases the highest BrO concentrations might be located close to the ground, our observations indicate that the maximum BrO concentrations might typically exist in a (possibly extended layer around the upper edge of the boundary layer. Besides the effect of a decreasing pH of sea salt aerosol with altitude and therefore an increase of BrO with height, this finding might be also related to vertical mixing of air from the free troposphere with the boundary layer, probably caused by convection over the warm ocean surface at polynyas and cracks in the ice. Strong vertical gradients of BrO and O3 could also explain why we found enhanced BrO levels almost continuously for the observations within the sea ice. Based on our estimated BrO profiles we derive BrO mixing ratios of several ten ppt, which is slightly higher than many existing observations. Our observations indicate that enhanced BrO concentrations around Antarctica exist about one month earlier than observed by satellite instruments. From detailed radiative transfer simulations we find that MAX-DOAS observations are up to about one order of

  1. Tumor Blood Vessel Dynamics

    Science.gov (United States)

    Munn, Lance

    2009-11-01

    ``Normalization'' of tumor blood vessels has shown promise to improve the efficacy of chemotherapeutics. In theory, anti-angiogenic drugs targeting endothelial VEGF signaling can improve vessel network structure and function, enhancing the transport of subsequent cytotoxic drugs to cancer cells. In practice, the effects are unpredictable, with varying levels of success. The predominant effects of anti-VEGF therapies are decreased vessel leakiness (hydraulic conductivity), decreased vessel diameters and pruning of the immature vessel network. It is thought that each of these can influence perfusion of the vessel network, inducing flow in regions that were previously sluggish or stagnant. Unfortunately, when anti-VEGF therapies affect vessel structure and function, the changes are dynamic and overlapping in time, and it has been difficult to identify a consistent and predictable normalization ``window'' during which perfusion and subsequent drug delivery is optimal. This is largely due to the non-linearity in the system, and the inability to distinguish the effects of decreased vessel leakiness from those due to network structural changes in clinical trials or animal studies. We have developed a mathematical model to calculate blood flow in complex tumor networks imaged by two-photon microscopy. The model incorporates the necessary and sufficient components for addressing the problem of normalization of tumor vasculature: i) lattice-Boltzmann calculations of the full flow field within the vasculature and within the tissue, ii) diffusion and convection of soluble species such as oxygen or drugs within vessels and the tissue domain, iii) distinct and spatially-resolved vessel hydraulic conductivities and permeabilities for each species, iv) erythrocyte particles advecting in the flow and delivering oxygen with real oxygen release kinetics, v) shear stress-mediated vascular remodeling. This model, guided by multi-parameter intravital imaging of tumor vessel structure

  2. Maury Journals - German Vessels

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — German vessels observations, after the 1853 Brussels Conference that set International Maritime Standards, modeled after Maury Marine Standard Observations.

  3. Oceanographic and fisheries data collected from NOAA and academic research vessels, and commercial menhaden vessels in Gulf of Mexico from 1988-06-14 to 1991-06-22 (NCEI Accession 0156304)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic and fisheries data were collected during 1988 through 1991 through a multiagency research project to develop a remote sensing system to provide near...

  4. The Investigation on Strain Strengthening Induced Martensitic Phase Transformation of Austenitic Stainless Steel: A Fundamental Research for the Quality Evaluation of Strain Strengthened Pressure Vessel

    Science.gov (United States)

    Li, Bo; Cai Ren, Fa; Tang, Xiao Ying

    2018-03-01

    The manufacture of pressure vessels with austenitic stainless steel strain strengthening technology has become an important technical means for the light weight of cryogenic pressure vessels. In the process of increasing the strength of austenitic stainless steel, strain can induce the martensitic phase transformation in austenite phase. There is a quantitative relationship between the transformation quantity of martensitic phase and the basic mechanical properties. Then, the martensitic phase variables can be obtained by means of detection, and the mechanical properties and safety performance are evaluated and calculated. Based on this, the quantitative relationship between strain hardening and deformation induced martensite phase content is studied in this paper, and the mechanism of deformation induced martensitic transformation of austenitic stainless steel is detailed.

  5. Trawling disturbance on benthic ecosystems and consequences on commercial species: a northwestern Mediterranean case study

    Directory of Open Access Journals (Sweden)

    Alba Muntadas

    2014-03-01

    Full Text Available Trawling is known to disturb benthic communities and habitats, which may in turn indirectly affect populations of commercial species that live in close association with the seabed. The degree of impact on both benthic communities and demersal species depends on the fishing effort level. This may vary over the year because of the fleet dynamics, which are in turn normally driven by the main target species’ life cycle. In this study we describe changes in benthic functional components of a northwestern Mediterranean fishing ground that represents a recruitment area for an important target species (red mullet, Mullus barbatus. This fishing ground experiences a varying intensity of fishing effort over the year and benthic functional components under different levels of trawling were compared with an unfished, control area. Traits related to sexual maturity and life span for infauna and body size and life span for epifauna were found to vary with fishing activity. Potential effects of these changes on ecological functioning and the impact on red mullet population are discussed. The development of fisheries management plans under an ecosystem based fisheries management (EBFM requires the links between target species and benthic communities’ disturbance due to fishing practices to be explicitly considered.

  6. Influence of tow duration on catch performance of trawl survey in the Mediterranean Sea.

    Directory of Open Access Journals (Sweden)

    Antonello Sala

    Full Text Available The aim of this study was to assess the effect of tow duration on catch per unit of swept area (CPUE, trawl catch performance, and the proportion of the species caught in a trawl survey. Longer tows are expected to have a greater probability of catching species. An average of 26 species were caught in the first 30 minutes, whereas only about one additional species was caught in the next 30 minutes in longer tows. The shorter tows involved a decrement in catch weight for 11 of the 12 target species sampled, demonstrating that tow duration did affect catch per unit of swept area CPUE. The shorter tows were associated with a significant reduction of the overall CPUE in terms of weight of the main target species and of the total catch (circa 60%. The same strong reduction of around 70% was found in particular for European hake (Merluccius merluccius and surmullet (Mullus spp and 50% for Nephrops (Nephrops norvegicus. The shorter tows were less efficient in catching large-sized hake, surmullet, Nephrops, Atlantic horse mackerel (Trachurus trachurus, and poor cod (Trisopterus minutus, even though the difference was significant only for Nephrops. Regardless of the p-value statistic, these findings suggest that the continuity of survey time series would be severely impaired by changing tow duration. Further work is required to explore a way to reduce tow duration without reducing CPUE.

  7. Otter trawls in Greece: Landing profiles and potential mιtiers

    Directory of Open Access Journals (Sweden)

    S. KATSANEVAKIS

    2010-02-01

    Full Text Available A fleet of 326 bottom trawlers operate in Greek Seas and their landings represent approximately 30% of the total fish production in Greece. In this study, otter trawl landings data were analyzed in order to identify potential métiers. Landings data between 2002 and 2006 were used, collected from 42 ports in the Aegean and East Ionian Sea. A three-step procedure was applied to identify potential métiers: the first step involved a factorial analysis of the log-transformed landings profiles, the second step a classification of the factorial coordinates, and the third step a further aggregation of clusters based on expert knowledge. In all, six potential métiers were identified in the Aegean Sea, and five in the Ionian Sea. The most important target species were European hake (Merluccius merluccius, deepwater pink shrimp (Parapenaeus longirostris, red mullet (Mullus barbatus, caramote prawn (Melicertus kerathurus, picarel (Spicara smaris, cephalopods, bogue (Boops boops, anglers (Lophiusspp., and Norway lobster (Nephrops norvegicus. Otter trawls in Greece use more or less the same gear with minor modification, and métier selection is basically reflected as a choice of geographical sub-area and hauling depth. The limitations of using landings profiles to identify métiers and the need for further verification are discussed.

  8. SEM/EDS and optical microscopy analyses of microplastics in ocean trawl and fish guts.

    Science.gov (United States)

    Wang, Zhong-Min; Wagner, Jeff; Ghosal, Sutapa; Bedi, Gagandeep; Wall, Stephen

    2017-12-15

    Microplastic particles from Atlantic and Pacific Ocean trawls, lab-fed fish guts and ocean fish guts have been characterized using optical microscopy and SEM/EDS in terms of size, morphology, and chemistry. We assessed whether these measurements could serve as a rapid screening process for subsequent identification of the likely microplastic candidates by micro-spectroscopy. Optical microscopy enabled morphological classification of the types of particles or fibers present in the sample, as well as the quantification of particle size ranges and fiber lengths. SEM/EDS analysis was used to rule out non-plastic particles and screen the prepared samples for potential microplastic, based on their element signatures and surface characteristics. Chlorinated plastics such as polyvinyl chloride (PVC) could be easily identified with SEM/EDS due to their unique elemental signatures including chlorine, as could mineral species that are falsely identified as plastics by optical microscopy. Particle morphology determined by optical microscopy and SEM suggests the fish ingested particles contained both degradation fragments from larger plastic pieces and also manufactured microplastics. SEM images of microplastic particle surfaces revealed characteristic cracks consistent with environmental exposure, as well as pigment particles consistent with manufactured materials. Most of the microplastic surfaces in the fish guts and ocean trawls were covered with biofilms, radiolarians, and crustaceans. Many of the fish stomachs contained micro-shell pieces which visually resembled microplastics. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Temporal modification in cardiac rhythmicity of Nephrops norvegicus (Crustacea: Decapoda in relation to trawl capture stress

    Directory of Open Access Journals (Sweden)

    Jacopo Aguzzi

    2005-09-01

    Full Text Available The effects of trawling on cardiac rhythmicity of Nephrops norvegicus (L. are still mostly unknown. Ultradian rhythms reported in previous studies may result from trawling capture stress, thus disappearing following acclimatisation to laboratory conditions. To test this hypothesis, 34 time series of cardiac activity data recorded in constant darkness were studied by Fourier analysis. Spectral decomposition of time series was obtained by defining the fundamental or circadian harmonic (CH in 24-h together with 9 submultiples of this period. The power content (PC of each harmonic was estimated in data segments of 24-h duration (days, giving graphic matrices of PC values over consecutive days. Values of PC for 9 submultiples were summed and studied in a block named ultradian band (UB. The modification in the PC of the CH and of the UB was evaluated during laboratory acclimatisation. A significant increase in the PC of the circadian harmonic component (CH over consecutive days of testing was observed. These findings suggest that, rather than being a product of dim light environmental fluctuations experienced by the animals from the deep waters of the continental slope, ultradian periodicity could well be caused by the stress of capture.

  10. Probabilistic atlas based labeling of the cerebral vessel tree

    Science.gov (United States)

    Van de Giessen, Martijn; Janssen, Jasper P.; Brouwer, Patrick A.; Reiber, Johan H. C.; Lelieveldt, Boudewijn P. F.; Dijkstra, Jouke

    2015-03-01

    Preoperative imaging of the cerebral vessel tree is essential for planning therapy on intracranial stenoses and aneurysms. Usually, a magnetic resonance angiography (MRA) or computed tomography angiography (CTA) is acquired from which the cerebral vessel tree is segmented. Accurate analysis is helped by the labeling of the cerebral vessels, but labeling is non-trivial due to anatomical topological variability and missing branches due to acquisition issues. In recent literature, labeling the cerebral vasculature around the Circle of Willis has mainly been approached as a graph-based problem. The most successful method, however, requires the definition of all possible permutations of missing vessels, which limits application to subsets of the tree and ignores spatial information about the vessel locations. This research aims to perform labeling using probabilistic atlases that model spatial vessel and label likelihoods. A cerebral vessel tree is aligned to a probabilistic atlas and subsequently each vessel is labeled by computing the maximum label likelihood per segment from label-specific atlases. The proposed method was validated on 25 segmented cerebral vessel trees. Labeling accuracies were close to 100% for large vessels, but dropped to 50-60% for small vessels that were only present in less than 50% of the set. With this work we showed that using solely spatial information of the vessel labels, vessel segments from stable vessels (>50% presence) were reliably classified. This spatial information will form the basis for a future labeling strategy with a very loose topological model.

  11. Reactor vessel sealing plug

    International Nuclear Information System (INIS)

    Dooley, R.A.

    1986-01-01

    This invention relates to an apparatus and method for sealing the cold leg nozzles of a nuclear reactor pressure vessel from a remote location during maintenance and inspection of associated steam generators and pumps while the pressure vessel and refueling canal are filled with water. The apparatus includes a sealing plug for mechanically sealing the cold leg nozzle from the inside of a reactor pressure vessel. The sealing plugs include a primary and a secondary O-ring. An installation tool is suspended within the reactor vessel and carries the sealing plug. The tool telescopes to insert the sealing plug within the cold leg nozzle, and to subsequently remove the plug. Hydraulic means are used to activate the sealing plug, and support means serve to suspend the installation tool within the reactor vessel during installation and removal of the sealing plug

  12. Containment vessel drain system

    Science.gov (United States)

    Harris, Scott G.

    2018-01-30

    A system for draining a containment vessel may include a drain inlet located in a lower portion of the containment vessel. The containment vessel may be at least partially filled with a liquid, and the drain inlet may be located below a surface of the liquid. The system may further comprise an inlet located in an upper portion of the containment vessel. The inlet may be configured to insert pressurized gas into the containment vessel to form a pressurized region above the surface of the liquid, and the pressurized region may operate to apply a surface pressure that forces the liquid into the drain inlet. Additionally, a fluid separation device may be operatively connected to the drain inlet. The fluid separation device may be configured to separate the liquid from the pressurized gas that enters the drain inlet after the surface of the liquid falls below the drain inlet.

  13. When does fishing lead to more fish? Community consequences of bottom trawl fisheries in demersal food webs

    NARCIS (Netherlands)

    Denderen, van P.D.; Kooten, van T.; Rijnsdorp, A.D.

    2013-01-01

    Bottom trawls are a globally used fishing gear that physically disturb the seabed and kill non-target organisms, including those that are food for the targeted fish species. There are indications that ensuing changes to the benthic invertebrate community may increase the availability of food and

  14. Similar effects of bottom trawling and natural disturbance on composition and function of benthic communities across habitats

    DEFF Research Database (Denmark)

    van Denderen, Pieter Daniël; Bolam, S.G.; Hiddink, J.G.

    2015-01-01

    communities in similar ways. Both sources of disturbance caused declines in long-living, hard-bodied (exoskeleton) and suspension-feeding organisms. Given these similar impacts, there was no detectable trawling effect on communities exposed to high natural disturbance. Conversely, in 3 out of 5 areas with low...

  15. A simulation-based attempt to quantify the morphological component of size selection of Nephrops norvegicus in trawl codends

    DEFF Research Database (Denmark)

    Frandsen, Rikke; Herrmann, Bent; Madsen, Niels

    2010-01-01

    The selectivity for Nephrops (Nephrops norvegicus) in trawl codends generally is poor and the lack of steepness of the selection curve results in high discard rates and/or loss of legal-sized catch. This poor codend selectivity often is attributed to the irregular shape of Nephrops, which to some...

  16. Influence of twin and multi-rig trawl systems on CPUE in the Danish Norway lobster (Nephrops norvegicus) fishery

    DEFF Research Database (Denmark)

    Feekings, Jordan P.; Berg, Casper Willestofte; Krag, Ludvig Ahm

    2016-01-01

    analyse catchrates of four target species, Norway lobster (Nephrops norvegicus), cod (Gadus morhua), plaice (Pleuronectesplatessa) and haddock (Melanogrammus aeglefinus), to try and understand how the use of multi-rig trawlshave altered catch rates within the Danish demersal trawl fishery over the last 16...

  17. The size selectivity of the main body of a sampling pelagic pair trawl in freshwater reservoirs during the night

    Czech Academy of Sciences Publication Activity Database

    Říha, Milan; Jůza, Tomáš; Prchalová, Marie; Mrkvička, Tomáš; Čech, Martin; Draštík, Vladislav; Muška, Milan; Kratochvíl, Michal; Peterka, Jiří; Tušer, Michal; Vašek, Mojmír; Kubečka, Jan

    2012-01-01

    Roč. 127, September (2012), s. 56-60 ISSN 0165-7836 R&D Projects: GA MZe(CZ) QH81046 Institutional support: RVO:60077344 Keywords : quantitative sampling * gear selectivity * trawl * reservoirs Subject RIV: GL - Fishing Impact factor: 1.695, year: 2012

  18. Avoidance reactions of fish in the trawl mouth opening in a shallow and turbid lake at night

    Czech Academy of Sciences Publication Activity Database

    Jůza, Tomáš; Rakowitz, G.; Draštík, Vladislav; Blabolil, Petr; Herzig, A.; Kratochvíl, Michal; Muška, Milan; Říha, Milan; Sajdlová, Zuzana; Kubečka, Jan

    2013-01-01

    Roč. 147, October (2013), s. 154-160 ISSN 0165-7836 R&D Projects: GA MŠk(CZ) EE2.3.20.0204 Institutional support: RVO:60077344 Keywords : Lake Neusiedl * trawl * DIDSON * fish abundance * biomass Subject RIV: EH - Ecology, Behaviour Impact factor: 1.843, year: 2013

  19. Using marine reserves to manage impact of bottom trawl fisheries requires consideration of benthic food-web interactions

    DEFF Research Database (Denmark)

    van Denderen, Pieter Daniël; Rijnsdorp, Adriaan D.; van Kooten, Tobias

    2016-01-01

    Marine protected areas (MPAs) are widely used to protect exploited fish species as well as to conserve marine habitats and their biodiversity. They have become a popular management tool also for bottom trawl fisheries, a common fishing technique on continental shelves worldwide. The effects of bo...

  20. Albatrosses following fishing vessels: how badly hooked are they on an easy meal?

    Directory of Open Access Journals (Sweden)

    José P Granadeiro

    Full Text Available Fisheries have major impacts on seabirds, both by changing food availability and by causing direct mortality of birds during trawling and longline setting. However, little is known about the nature and the spatial-temporal extent of the interactions between individual birds and vessels. By studying a system in which we had fine-scale data on bird movements and activity, and near real-time information on vessel distribution, we provide new insights on the association of a threatened albatross with fisheries. During early chick-rearing, black-browed albatrosses Thalassarche melanophris from two different colonies (separated by only 75 km showed significant differences in the degree of association with fisheries, despite being nearly equidistant to the Falklands fishing fleet. Most foraging trips from either colony did not bring tracked individuals close to vessels, and proportionally little time and foraging effort was spent near ships. Nevertheless, a few individuals repeatedly visited fishing vessels, which may indicate they specialise on fisheries-linked food sources and so are potentially more vulnerable to bycatch. The evidence suggests that this population has little reliance on fisheries discards at a critical stage of its nesting cycle, and hence measures to limit fisheries waste on the Patagonian shelf that also reduce vessel attractiveness and the risk of incidental mortality, would be of high overall conservation benefit.

  1. NCSX Vacuum Vessel Fabrication

    International Nuclear Information System (INIS)

    Viola ME; Brown T; Heitzenroeder P; Malinowski F; Reiersen W; Sutton L; Goranson P; Nelson B; Cole M; Manuel M; McCorkle D.

    2005-01-01

    The National Compact Stellarator Experiment (NCSX) is being constructed at the Princeton Plasma Physics Laboratory (PPPL) in conjunction with the Oak Ridge National Laboratory (ORNL). The goal of this experiment is to develop a device which has the steady state properties of a traditional stellarator along with the high performance characteristics of a tokamak. A key element of this device is its highly shaped Inconel 625 vacuum vessel. This paper describes the manufacturing of the vessel. The vessel is being fabricated by Major Tool and Machine, Inc. (MTM) in three identical 120 o vessel segments, corresponding to the three NCSX field periods, in order to accommodate assembly of the device. The port extensions are welded on, leak checked, cut off within 1-inch of the vessel surface at MTM and then reattached at PPPL, to accommodate assembly of the close-fitting modular coils that surround the vessel. The 120 o vessel segments are formed by welding two 60 o segments together. Each 60 o segment is fabricated by welding ten press-formed panels together over a collapsible welding fixture which is needed to precisely position the panels. The vessel is joined at assembly by welding via custom machined 8-inch (20.3 cm) wide spacer ''spool pieces''. The vessel must have a total leak rate less than 5 X 10 -6 t-l/s, magnetic permeability less than 1.02(micro), and its contours must be within 0.188-inch (4.76 mm). It is scheduled for completion in January 2006

  2. Radioactive waste processing vessel

    International Nuclear Information System (INIS)

    Hayashi, Masaru; Suzuki, Osamu; Ishizaki, Kanjiro.

    1987-01-01

    Purpose: To obtain a vessel of a reduced weight and with no external leaching of radioactive materials. Constitution: The vessel main body is constituted, for example, with light weight concretes or foamed concretes, particularly, foamed concretes containing fine closed bubbles in the inside. Then, layers having dense texture made of synthetic resin such as polystylene, vinylchloride resin, etc. or metal plate such as stainless plate are integrally disposed to the inner surface of the vessel main body. The cover member also has the same structure. (Sekiya, K.)

  3. Tempest in a vessel

    International Nuclear Information System (INIS)

    Barre, Bertrand

    2015-01-01

    As the ASN made some statements about anomalies of carbon content in the EPR vessel bottom and top, the author recalls and comments some technical issues to better understand the information published on this topic. He notably addresses the role of the vessel, briefly indicates its operating conditions, shape and structure, and mechanical components for the top, its material and mechanical properties, and test samples used to assess mechanical properties. He also comments the phenomenon of radio-induced embrittlement, the vessel manufacturing process, and evokes the applicable regulations. He quotes and comments statements made by the ASN and Areva which evoke further assessments of the concerned components

  4. Cheboygan Vessel Base

    Data.gov (United States)

    Federal Laboratory Consortium — Cheboygan Vessel Base (CVB), located in Cheboygan, Michigan, is a field station of the USGS Great Lakes Science Center (GLSC). CVB was established by congressional...

  5. High Performance Marine Vessels

    CERN Document Server

    Yun, Liang

    2012-01-01

    High Performance Marine Vessels (HPMVs) range from the Fast Ferries to the latest high speed Navy Craft, including competition power boats and hydroplanes, hydrofoils, hovercraft, catamarans and other multi-hull craft. High Performance Marine Vessels covers the main concepts of HPMVs and discusses historical background, design features, services that have been successful and not so successful, and some sample data of the range of HPMVs to date. Included is a comparison of all HPMVs craft and the differences between them and descriptions of performance (hydrodynamics and aerodynamics). Readers will find a comprehensive overview of the design, development and building of HPMVs. In summary, this book: Focuses on technology at the aero-marine interface Covers the full range of high performance marine vessel concepts Explains the historical development of various HPMVs Discusses ferries, racing and pleasure craft, as well as utility and military missions High Performance Marine Vessels is an ideal book for student...

  6. 2011 Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  7. 2011 Fishing Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  8. Pressurized Vessel Slurry Pumping

    International Nuclear Information System (INIS)

    Pound, C.R.

    2001-01-01

    This report summarizes testing of an alternate ''pressurized vessel slurry pumping'' apparatus. The principle is similar to rural domestic water systems and ''acid eggs'' used in chemical laboratories in that material is extruded by displacement with compressed air

  9. 2013 Tanker Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  10. Maury Journals - US Vessels

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — U.S. vessels observations, after the 1853 Brussels Conference that set International Maritime Standards, modeled after Maury Marine Standard Observations.

  11. Coastal Logbook Survey (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains catch (landed catch) and effort for fishing trips made by vessels that have been issued a Federal permit for the Gulf of Mexico reef fish,...

  12. Reactor pressure vessel support

    International Nuclear Information System (INIS)

    Butti, J.P.

    1977-01-01

    A link and pin support system provides the primary vertical and lateral support for a nuclear reactor pressure vessel without restricting thermally induced radial and vertical expansion and contraction. (Auth.)

  13. 2013 Cargo Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  14. 2013 Fishing Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  15. 2013 Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  16. Ocean Station Vessel

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Ocean Station Vessels (OSV) or Weather Ships captured atmospheric conditions while being stationed continuously in a single location. While While most of the...

  17. Vessel Sewage Discharges

    Science.gov (United States)

    Vessel sewage discharges are regulated under Section 312 of the Clean Water Act, which is jointly implemented by the EPA and Coast Guard. This homepage links to information on marine sanitation devices and no discharge zones.

  18. Interstitial Cells of Blood Vessels

    Directory of Open Access Journals (Sweden)

    Vladimír Pucovský

    2010-01-01

    Full Text Available Blood vessels are made up of several distinct cell types. Although it was originally thought that the tunica media of blood vessels was composed of a homogeneous population of fully differentiated smooth muscle cells, more recent data suggest the existence of multiple smooth muscle cell subpopulations in the vascular wall. One of the cell types contributing to this heterogeneity is the novel, irregularly shaped, noncontractile cell with thin processes, termed interstitial cell, found in the tunica media of both veins and arteries. While the principal role of interstitial cells in veins seems to be pacemaking, the role of arterial interstitial cells is less clear. This review summarises the knowledge of the functional and structural properties of vascular interstitial cells accumulated so far, offers hypotheses on their physiological role, and proposes directions for future research.

  19. Reactor pressure vessel design

    International Nuclear Information System (INIS)

    Foehl, J.

    1998-01-01

    As a result of the popularity of the Agencies report 'Neutron Irradiation Embrittlement of Reactor Pressure Vessel Steels' of 1975, it was decided that another report on this broad subject would be of use. In this report, background and contemporary views on specially identified areas of the subject are considered as self-contained chapters, written by experts. In chapter 2, the general principles of reactor pressure vessel design are elaborated. Crack and fracture initiation and propagation are treated in some detail

  20. Graywater Discharges from Vessels

    Science.gov (United States)

    2011-11-01

    metals (e.g., cadmium, chromium, lead, copper , zinc, silver, nickel, and mercury), solids, and nutrients (USEPA, 2008b; USEPA 2010). Wastewater from... flotation ), and disinfection (using ultraviolet light) as compared to traditional Type II MSDs that use either simple maceration and chlorination, or...Coliform Naval Vessels Oceanographic Vessels Small Cruise Ships 25a Vendor 2 Hamann AG Biological Treatment with Dissolved Air Flotation and

  1. Discarding Discards: Identification of influential factors and possible mitigation tools in demersal trawl fisheries

    DEFF Research Database (Denmark)

    Feekings, Jordan P.

    Discarding of aquatic organisms is a global problem in the world’s fisheries, where more than 7 million tonnes are caught and subsequently discarded each year. The understanding of what drives discarding can help provide mitigation measures in the future. Altering management measures which result...... in high discard rates/ratios may prove beneficial not only to the economic viability of the fishery but also to the biological functioning of the ecosystem. The present Ph.D. thesis, titled “Discarding Discards: Identification of influential factors and possible mitigation tools in demersal trawl...... an examination of the efficiency of technical regulations currently in force and retrospective analyses of the efficiency of such measures in the past. The thesis consists of a review and 4 papers. Paper I is an investigation of the factors that can potentially influence the discarding of commercial species...

  2. Escape windows to improve the size selectivity in the Baltic cod trawl fishery

    DEFF Research Database (Denmark)

    Madsen, Niels; Holst, René; Foldager, L.

    2002-01-01

    A rapid decrease of the stock of Baltic cod (Gadus morhua) has provided the incentive to improve the size selectivity in the trawl fishery. Use of escape windows is permitted in the legislation to give means of improving the size selectivity of cod as an alternative to a traditional standard codend....... The history of the use of escape windows in the Baltic Sea cod fishery is reviewed. The present escape windows do not function optimally. The objective of this new experiment was to compare an improved design of escape window, which is placed in the upper panel, with that of standard codend. Three standard...... of the codend selectivity was formulated to analyse the results and determine the effects of codend type, mesh size and other recorded variables. L50 and SR increased significantly with the mesh size. L50 was significantly increased and SR significantly reduced for a window codend with the same window mesh size...

  3. A comparative study of Northern Ireland's estuaries based on the results of beam trawl fish surveys

    Science.gov (United States)

    Harrison, Trevor D.; Armour, Neil D.; McNeill, Michael T.; Moorehead, Peter W.

    2017-11-01

    The fish communities of Northern Ireland's estuaries were described and compared using data collected with a modified beam trawl over a six year period from 2009 to 2014. Multivariate analyses identified four estuary groups based on variations in their physico-chemical attributes. These groups broadly corresponded with the distribution and variation of estuary geomorphic types identified around the Irish coast. The dominant fish species captured were also among the main species reported in other North East Atlantic estuaries. A significant link between the estuary types and their fish communities was found; each estuary group contained a somewhat distinctive fish community. The fish communities also showed a significant relationship with the physico-chemical characteristics of the estuaries. Differences in fish species composition are attributed to habitat and environmental preferences of key estuary-associated species.

  4. LANL Robotic Vessel Scanning

    Energy Technology Data Exchange (ETDEWEB)

    Webber, Nels W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-11-25

    Los Alamos National Laboratory in J-1 DARHT Operations Group uses 6ft spherical vessels to contain hazardous materials produced in a hydrodynamic experiment. These contaminated vessels must be analyzed by means of a worker entering the vessel to locate, measure, and document every penetration mark on the vessel. If the worker can be replaced by a highly automated robotic system with a high precision scanner, it will eliminate the risks to the worker and provide management with an accurate 3D model of the vessel presenting the existing damage with the flexibility to manipulate the model for better and more in-depth assessment.The project was successful in meeting the primary goal of installing an automated system which scanned a 6ft vessel with an elapsed time of 45 minutes. This robotic system reduces the total time for the original scope of work by 75 minutes and results in excellent data accumulation and transmission to the 3D model imaging program.

  5. Common dolphin (Delphinus delphis bycatch in New Zealand commercial trawl fisheries.

    Directory of Open Access Journals (Sweden)

    Finlay N Thompson

    Full Text Available Marine mammals are regularly reported as bycatch in commercial and artisanal fisheries, but data are often insufficient to allow assessment of these incidental mortalities. Observer coverage of the mackerel trawl fishery in New Zealand waters between 1995 and 2011 allowed evaluation of common dolphin Delphinus delphis bycatch on the North Island west coast, where this species is the most frequently caught cetacean. Observer data were used to develop a statistical model to estimate total captures and explore covariates related to captures. A two-stage Bayesian hurdle model was used, with a logistic generalised linear model predicting whether any common dolphin captures occurred on a given tow of the net, and a zero-truncated Poisson distribution to estimate the number of dolphin captures, given that there was a capture event. Over the 16-year study period, there were 119 common dolphin captures reported on 4299 observed tows. Capture events frequently involved more than one individual, with a maximum of nine common dolphin observed caught in a single tow. There was a peak of 141 estimated common dolphin captures (95% c.i.: 56 to 276; 6.27 captures per 100 tows in 2002-03, following the marked expansion in annual effort in this fishery to over 2000 tows. Subsequently, the number of captures fluctuated although fishing effort remained relatively high. Of the observed capture events, 60% were during trawls where the top of the net (headline was <40 m below the surface, and the model determined that this covariate best explained common dolphin captures. Increasing headline depth by 21 m would halve the probability of a dolphin capture event on a tow. While lack of abundance data prevents assessment of the impact of these mortalities on the local common dolphin population, a clear recommendation from this study is the increasing of headline depth to reduce common dolphin captures.

  6. Groundfish/Shrimp and Red Snapper trawl surveys conducted in the Gulf of Mexico from 1990-01-01 to 2014-12-30 (NCEI Accession 0147703)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Southeast Fisheries Science Center Mississippi Laboratories has conducted standardized groundfish trawl surveys in the Gulf of Mexico since 1987. Prior to 1987,...

  7. AFSC/RACE/MACE: Results of 2013 Acoustic-trawl survey of the Shumagin Islands, Sanak Trough, and Morzhovoi Bay dy1302

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The survey’s primary objective was to collect acoustic data and trawl information to estimate midwater abundance and distribution of walleye pollock (Gadus...

  8. First Receiver and Shorebased Processor Data - Economic Data Collection for Monitoring the Economic Effects of the West Coast Groundfish Trawl Rationalization Program

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project was initiated in response to regulation 50 CFR 660.114, which mandates that economic data be collected from every participant in the trawl...

  9. Catcher Processor Cost Earnings Data - Economic Data Collection for Monitoring the Economic Effects of the West Coast Groundfish Trawl Rationalization Program

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project was initiated in response to regulation 50 CFR 660.114, which mandates that economic data be collected from every participant in the trawl...

  10. AFSC/RACE/SAP: Detailed Crab Data From NOAA Fisheries Service Annual Eastern Bering Sea Summer Bottom Trawl Surveys 1975 - 2015

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains detailed crab data collected from the annual NOAA/NMFS/AFSC/RACE crab-groundfish bottom trawl survey of the eastern Bering Sea continental...

  11. FFTF and CRBRP reactor vessels

    International Nuclear Information System (INIS)

    Morgan, R.E.

    1977-01-01

    The Fast Flux Test Facility (FFTF) reactor vessel and the Clinch River Breeder Reactor Plant (CRBRP) reactor vessel each serve to enclose a fast spectrum reactor core, contain the sodium coolant, and provide support and positioning for the closure head and internal structure. Each vessel is located in its reactor cavity and is protected by a guard vessel which would ensure continued decay heat removal capability should a major system leak develop. Although the two plants have significantly different thermal power ratings, 400 megawatts for FFTF and 975 megawatts for CRBRP, the two reactor vessels are comparable in size, the CRBRP vessel being approximately 28% longer than the FFTF vessel. The FFTF vessel diameter was controlled by the space required for the three individual In-Vessel Handling Machines and Instrument Trees. Utilization of the triple rotating plug scheme for CRBRP refueling enables packaging of the larger CRBRP core in a vessel the same diameter as the FFTF vessel

  12. Twenty-fifth water reactor safety information meeting: Proceedings. Volume 1: Plenary sessions; Pressure vessel research; BWR strainer blockage and other generic safety issues; Environmentally assisted degradation of LWR components; Update on severe accident code improvements and applications

    International Nuclear Information System (INIS)

    Monteleone, S.

    1998-03-01

    This three-volume report contains papers presented at the conference. The papers are printed in the order of their presentation in each session and describe progress and results of programs in nuclear safety research conducted in this country and abroad. Foreign participation in the meeting included papers presented by researchers from France, Japan, Norway, and Russia. The titles of the papers and the names of the authors have been updated and may differ from those that appeared in the final program of the meeting. This volume contains the following information: (1) plenary sessions; (2) pressure vessel research; (3) BWR strainer blockage and other generic safety issues; (4) environmentally assisted degradation of LWR components; and (5) update on severe accident code improvements and applications. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database

  13. Twenty-fifth water reactor safety information meeting: Proceedings. Volume 1: Plenary sessions; Pressure vessel research; BWR strainer blockage and other generic safety issues; Environmentally assisted degradation of LWR components; Update on severe accident code improvements and applications

    Energy Technology Data Exchange (ETDEWEB)

    Monteleone, S. [comp.] [Brookhaven National Lab., Upton, NY (United States)

    1998-03-01

    This three-volume report contains papers presented at the conference. The papers are printed in the order of their presentation in each session and describe progress and results of programs in nuclear safety research conducted in this country and abroad. Foreign participation in the meeting included papers presented by researchers from France, Japan, Norway, and Russia. The titles of the papers and the names of the authors have been updated and may differ from those that appeared in the final program of the meeting. This volume contains the following information: (1) plenary sessions; (2) pressure vessel research; (3) BWR strainer blockage and other generic safety issues; (4) environmentally assisted degradation of LWR components; and (5) update on severe accident code improvements and applications. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  14. Sexual harassment within the marine sciences and the ethical dilemmas of collaboration: a case study in the education and reportino methods available to scientists, students, and staff on board a federal research vessel

    Science.gov (United States)

    Ohern, J.

    2016-02-01

    Within the Science, technology, engineering, and math (STEM) disciplines, a disparity between male and female involvement persists on the order of about 3:1. While roughly 40% of men with STEM degrees go on to pursue STEM jobs, just 26% of women with STEM degrees hold jobs within the STEM field. There are a number of contributing factors to these disparities, but one pernicious factor is the issue of sexual harassment and discrimination. For the marine sciences this is an especially concerning issue because our field research frequently takes place hundreds of miles offshore. Despite education and policy initiatives, sexual harassment pervades many research vessels and is often never addressed, discouraging female involvement and limiting the opportunities available to women. Ethical dilemmas develop when administrators do not want to risk limited field schedules and funding while investigations are conducted and harassment issues resolved. Additionally, scientists and staff often collaborate between institutions, benefitting science but blurring the lines of responsibility. In one such case, administrators within a federal research office declined to report sexual harassment taking place between contracted crew members on their research vessel. The lengthy review process and lack of culpability discourages reporting of sexual harassment and allows problematic situations to occur. This case study reviews the reporting mechanisms currently in place, the barriers to reporting, and the proposed methods for more effectively resolving discriminatory workplaces. Collaboration within marine science is an absolute necessity, and our research benefits from diverse working groups. As marine scientists we have an ethical responsibility to ensure safe working environments for both the scientists and the staff who make our research possible.

  15. Cooperation between scientists, NGOs and industry in support of sustainable fisheries: the South African hake Merluccius spp. trawl fishery experience.

    Science.gov (United States)

    Field, J G; Attwood, C G; Jarre, A; Sink, K; Atkinson, L J; Petersen, S

    2013-10-01

    This paper examines the increasingly close interaction between natural and social scientists, non-governmental organizations (NGO) and industry, in pursuit of responsible ecosystem-based management of fisheries. South Africa has committed to implementing an ecosystem approach to fisheries management. Management advice stems from multi-stakeholder representation on government-led scientific and management working groups. In the hake Merluccius capensis and Merluccius paradoxus fishery, the primary management measure is an annual total allowable catch (TAC), the level of which is calculated using a management procedure (MP) that is revised approximately every 4 years. Revision of the MP is a consultative process involving most stakeholders, and is based on simulation modelling of projected probable scenarios of resource and fishery dynamics under various management options. NGOs, such as the Worldwide Fund for Nature in South Africa (WWF-SA), have played an important role in influencing consumers, the fishing industry and government to develop responsible fishing practices that minimize damage to marine ecosystems. Cooperation between industry, government and scientists has helped to improve sustainability and facilitated the meeting of market-based incentives for more responsible fisheries. Research includes ecosystem modelling, spatial analysis and ecosystem risk assessment with increasing research focus on social and economic aspects of the fishery. A four-year cooperative experiment to quantify the effect of trawling on benthic community structure is being planned. The food requirements of top predators still need to be included in the TAC-setting formulae and more social and economic research is needed. This paper also demonstrates how NGO initiatives such as Marine Stewardship Council certification and the Southern African Sustainable Seafood Initiative, a traffic light system of classifying seafood for consumers, have contributed to responsible fishing

  16. BY FRUSTUM CONFINING VESSEL

    Directory of Open Access Journals (Sweden)

    Javad Khazaei

    2016-09-01

    Full Text Available Helical piles are environmentally friendly and economical deep foundations that, due to environmental considerations, are excellent additions to a variety of deep foundation alternatives available to the practitioner. Helical piles performance depends on soil properties, the pile geometry and soil-pile interaction. Helical piles can be a proper alternative in sensitive environmental sites if their bearing capacity is sufficient to support applied loads. The failure capacity of helical piles in this study was measured via an experimental research program that was carried out by Frustum Confining Vessel (FCV. FCV is a frustum chamber by approximately linear increase in vertical and lateral stresses along depth from top to bottom. Due to special geometry and applied bottom pressure, this apparatus is a proper choice to test small model piles which can simulate field stress conditions. Small scale helical piles are made with either single helix or more helixes and installed in fine grained sand with three various densities. Axial loading tests including compression and tension tests were performed to achieve pile ultimate capacity. The results indicate the helical piles behavior depends essentially on pile geometric characteristics, i.e. helix configuration and soil properties. According to the achievements, axial uplift capacity of helical model piles is about equal to usual steel model piles that have the helixes diameter. Helical pile compression bearing capacity is too sufficient to act as a medium pile, thus it can be substituted other piles in special geoenvironmental conditions. The bearing capacity also depends on spacing ratio, S/D, and helixes diameter.

  17. Acrylic vessel cleaning tests

    International Nuclear Information System (INIS)

    Earle, D.; Hahn, R.L.; Boger, J.; Bonvin, E.

    1997-01-01

    The acrylic vessel as constructed is dirty. The dirt includes blue tape, Al tape, grease pencil, gemak, the glue or residue form these tapes, finger prints and dust of an unknown composition but probably mostly acrylic dust. This dirt has to be removed and once removed, the vessel has to be kept clean or at least to be easily cleanable at some future stage when access becomes much more difficult. The authors report on the results of a series of tests designed: (a) to prepare typical dirty samples of acrylic; (b) to remove dirt stuck to the acrylic surface; and (c) to measure the optical quality and Th concentration after cleaning. Specifications of the vessel call for very low levels of Th which could come from tape residues, the grease pencil, or other sources of dirt. This report does not address the concerns of how to keep the vessel clean after an initial cleaning and during the removal of the scaffolding. Alconox is recommended as the cleaner of choice. This acrylic vessel will be used in the Sudbury Neutrino Observatory

  18. Analysis and standardization of landings per unit effort of red shrimp Aristeus antennatus from the trawl fleet of Barcelona (NW Mediterranean

    Directory of Open Access Journals (Sweden)

    Valeria Mamouridis

    2014-03-01

    Full Text Available Monthly landings and effort data from the Barcelona trawl fleet (NW Mediterranean were selected to analyse and standardize the landings per unit effort (LPUE of the red shrimp (Aristeus antennatus using generalized additive models. The dataset covers a span of 15 years (1994-2008 and consists of a broad spectrum of predictors: fleet-dependent (e.g. number of trips performed by vessels and their technical characteristics, such as the gross registered tonnage, temporal (inter- and intra-annual variability, environmental (North Atlantic Oscillation [NAO] index and economic (red shrimp and fuel prices variables. All predictors individually have an impact on LPUE, though some of them lose their predictive power when considered jointly. That is the case of the NAO index. Our results show that six variables from the whole set can be incorporated into a global model with a total explained deviance (ED of 43%. We found that the most important variables were effort-related predictors (trips, tonnage, and groups with a total ED of 20.58%, followed by temporal variables, with an ED of 13.12%, and finally the red shrimp price as an economic predictor with an ED of 9.30%. Taken individually, the main contributing variable was the inter-annual variability (ED=12.40%. This high ED value suggests that many factors correlated with inter-annual variability, such as environmental factors (the NAO in specific years and fuel price, could in turn affect LPUE variability. The standardized LPUE index with the effort variability removed was found to be similar to the fishery-independent abundance index derived from the MEDITS programme.

  19. Effort dynamics in a fisheries bioeconomic model: A vessel level approach through Game Theory

    Directory of Open Access Journals (Sweden)

    Gorka Merino

    2007-09-01

    Full Text Available Red shrimp, Aristeus antennatus (Risso, 1816 is one of the most important resources for the bottom-trawl fleets in the northwestern Mediterranean, in terms of both landings and economic value. A simple bioeconomic model introducing Game Theory for the prediction of effort dynamics at vessel level is proposed. The game is performed by the twelve vessels exploiting red shrimp in Blanes. Within the game, two solutions are performed: non-cooperation and cooperation. The first is proposed as a realistic method for the prediction of individual effort strategies and the second is used to illustrate the potential profitability of the analysed fishery. The effort strategy for each vessel is the number of fishing days per year and their objective is profit maximisation, individual profits for the non-cooperative solution and total profits for the cooperative one. In the present analysis, strategic conflicts arise from the differences between vessels in technical efficiency (catchability coefficient and economic efficiency (defined here. The ten-year and 1000-iteration stochastic simulations performed for the two effort solutions show that the best strategy from both an economic and a conservationist perspective is homogeneous effort cooperation. However, the results under non-cooperation are more similar to the observed data on effort strategies and landings.

  20. TMI-2 Vessel Investigation Project integration report

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, J. R.; Rempe, J. L.; Stickler, L. A.; Korth, G. E.; Diercks, D. R.; Neimark, L. A.; Akers, D W; Schuetz, B. K.; Shearer, T L; Chavez, S. A.; Thinnes, G. L.; Witt, R. J.; Corradini, M L; Kos, J. A. [EG and G Idaho, Inc., Idaho Falls, ID (United States)

    1994-03-01

    The Three Mile Island Unit 2 (TMI-2) Vessel Investigation Project (VIP) was an international effort that was sponsored by the Nuclear Energy Agency of the Organization for Economic Cooperation and Development. The primary objectives of the VIP were to extract and examine samples from the lower head and to evaluate the potential modes of failure and the margin of structural integrity that remained in the TMI-2 reactor vessel during the accident. This report presents a summary of the major findings and conclusions that were developed from research during the VIP. Results from the various elements of the project are integrated to form a cohesive understanding of the vessel`s condition after the accident.

  1. Effect of the in- and ex-vessel dual cooling on the retention of an internally heated melt pool in a hemispherical vessel

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, K.I.; Kim, B.S.; Kim, D.H. [Korea Atomic Energy Research Inst., Thermal Hydraulic Safety Research, Taejon (Korea, Republic of)

    2001-07-01

    A concept of in-vessel melt retention (IVMR) by in-vessel reflooding and/or reactor cavity flooding has been considered as one of severe accident management strategies and intensive researches to be performed worldwide. This paper provides some results of analytical investigations on the effect of both in- / ex-vessel cooling on the retention of an internally heated molten pool confined in a hemispherical vessel and the related thermal behavior of the vessel wall. For the present analysis, a scale-down reactor vessel for the KSNP reactor design of 1000 MWe (a large dry PWR) is utilized for a reactor vessel. Aluminum oxide melt simulant is also utilized for a real corium pool. An internal power density in the molten pool is determined by a simple scaling analysis that equates the heat flux on the the scale-down vessel wall to that estimated from KSNP. Well-known temperature-dependent boiling heat transfer curves are applied to the in- and ex-vessel cooling boundaries and radiative heat transfer has been only considered in the case of dry in-vessel. MELTPOOL, which is a computational fluid dynamics (CFD) code developed at KAERI, is applied to obtain the time-varying heat flux distribution from a molten pool and the vessel wall temperature distributions with angular positions along the vessel wall. In order to gain further insights on the effectiveness of in- and ex-vessel dual cooling on the in-vessel corium retention, four different boundary conditions has been considered: no water inside the vessel without ex-vessel cooling, water inside the vessel without ex-vessel cooling, no water inside the vessel with ex-vessel cooling, and water inside the vessel with ex-vessel cooling. (authors)

  2. Effect of the in- and ex-vessel dual cooling on the retention of an internally heated melt pool in a hemispherical vessel

    International Nuclear Information System (INIS)

    Ahn, K.I.; Kim, B.S.; Kim, D.H.

    2001-01-01

    A concept of in-vessel melt retention (IVMR) by in-vessel reflooding and/or reactor cavity flooding has been considered as one of severe accident management strategies and intensive researches to be performed worldwide. This paper provides some results of analytical investigations on the effect of both in- / ex-vessel cooling on the retention of an internally heated molten pool confined in a hemispherical vessel and the related thermal behavior of the vessel wall. For the present analysis, a scale-down reactor vessel for the KSNP reactor design of 1000 MWe (a large dry PWR) is utilized for a reactor vessel. Aluminum oxide melt simulant is also utilized for a real corium pool. An internal power density in the molten pool is determined by a simple scaling analysis that equates the heat flux on the the scale-down vessel wall to that estimated from KSNP. Well-known temperature-dependent boiling heat transfer curves are applied to the in- and ex-vessel cooling boundaries and radiative heat transfer has been only considered in the case of dry in-vessel. MELTPOOL, which is a computational fluid dynamics (CFD) code developed at KAERI, is applied to obtain the time-varying heat flux distribution from a molten pool and the vessel wall temperature distributions with angular positions along the vessel wall. In order to gain further insights on the effectiveness of in- and ex-vessel dual cooling on the in-vessel corium retention, four different boundary conditions has been considered: no water inside the vessel without ex-vessel cooling, water inside the vessel without ex-vessel cooling, no water inside the vessel with ex-vessel cooling, and water inside the vessel with ex-vessel cooling. (authors)

  3. Radioactive liquid containing vessel

    International Nuclear Information System (INIS)

    Sakurada, Tetsuo; Kawamura, Hironobu.

    1993-01-01

    Cooling jackets are coiled around the outer circumference of a container vessel, and the outer circumference thereof is covered with a surrounding plate. A liquid of good conductivity (for example, water) is filled between the cooling jackets and the surrounding plate. A radioactive liquid is supplied to the container vessel passing through a supply pipe and discharged passing through a discharge pipe. Cooling water at high pressure is passed through the cooling water jackets in order to remove the heat generated from the radioactive liquid. Since cooling water at high pressure is thus passed through the coiled pipes, the wall thickness of the container vessel and the cooling water jackets can be reduced, thereby enabling to reduce the cost. Further, even if the radioactive liquid is leaked, there is no worry of contaminating cooling water, to prevent contamination. (I.N.)

  4. Selectivity of Standard, Narrow and Square Mesh Panel Trawl Codends for Hake (Merluccius merluccius) and Poor Cod (Trisopterus minutus capelanus)

    OpenAIRE

    ÖZBİLGİN, Hüseyin; TOSUNOĞLU, Zafer; AYDIN, Celalettin; KAYKAÇ, Hakan; TOKAÇ, Adnan

    2005-01-01

    The selectivity of 3 trawl codends, (1) a commercially used standard codend, (2) a narrow codend (100 meshes on its circumference instead of 200) and (3) a square mesh top panel codend, was tested for hake (Merluccius merluccius) and poor cod (Trisopterus minutus capelanus) between 8 and 24 October 2003, in the Aegean Sea. Data were collected using the covered codend technique, and analysed by means of a logistic equation with the maximum likelihood method. The results show that the commer...

  5. Identification and evaluation of shark bycatch in Georgia’s commercial shrimp trawl fishery with implications for management

    Science.gov (United States)

    Belcher, C.N.; Jennings, Cecil A.

    2011-01-01

    Many US states have recreational and commercial fisheries that occur in nursery areas occupied by subadult sharks and can potentially affect their survival. Georgia is one of few US states without a directed commercial shark fishery, but the state has a large, nearshore penaeid shrimp trawl fishery in which small sharks occur as bycatch. During our 1995-1998 investigation of bycatch in fishery-dependent sampling events, 34% of 127 trawls contained sharks. This bycatch totalled 217 individuals from six species, with Atlantic sharpnose shark, Rhizoprionodon terraenovae (Richardson), the most common and finetooth shark, Carcharhinus isodon (Müller & Henle) and spinner shark, Carcharhinus brevipinna (Müller & Henle), the least common. The highest catch rates for sharks occurred during June and July and coincided with the peak months of the pupping season for many species. Trawl tow speed and tow time did not significantly influence catch rates for shark species. Gear configurations [net type, turtle excluder device (TED), bycatch reduction device] affected catch rates for shark species. Results of this study indicate gear restrictions, a delayed season opening, or reduced bar spacing on TEDs may reduce shark bycatch in this fishery.

  6. 76 FR 54887 - Fisheries Off West Coast States; Pacific Coast Groundfish Fishery Management Plan; Trawl...

    Science.gov (United States)

    2011-09-02

    ... update erroneous cross references, outdated terms, and duplicate regulatory entries. The correction is...-vessel value already exists on the e-ticket, NMFS has had mixed reporting of the ex-vessel value on the e... marketing, the first receiver or processor must either edit the e-ticket or submit a revised e-ticket...

  7. Modelling of in-vessel retention after relocation of corium into the lower plenum - Evaluation of the temperature field and of the viscoplastic deformation of the vessel wall. Reactor safety research, project No.:150 1254 - Final report; Beitrag zur Modellierung der Schmelzerueckhaltung im RDB nach Verlagerung von Corium in das untere Plenum - Berechnung des Temperaturfeldes und der viskoplastischen Verformung der Behaelterwand. Reaktorsicherheitsforschung, Vorhaben-Nr.: 150 1254 - Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Altstadt, E.; Willschuetz, H.G. [Forschungszentrum Rossendorf e.V. (FZR), Dresden (Germany)

    2005-01-01

    Considering the hypothetical core melt down scenario for a light water reactor (LWR) a possible failure mode of the reactor pressure vessel (RPV) and its failure time has to be investigated for a determination of the loadings on the containment. Several experiments have been performed accompanied with material properties evaluation, theoretical, and numerical work. At the Institute Of Safety Research of the FZR a finite element model has been developed simulating the thermal processes and the viscoplastic behaviour of the vessel wall. An advanced model for creep and material damage has been established and has been validated using experimental data. The thermal hydraulic and the mechanical calculations are sequentially and recursively coupled. The model is capable of evaluating fracture time and fracture position of a vessel with an internally heated melt pool. The model was applied to pre- and post test calculations for the FOREVER test series representing the RPV of a PWR in the scale of 1:10. These experiments were performed at the Royal Institute of Technology in Stockholm. The results of the calculations can be summarised as follows: The creeping process is caused by the simultaneous presence of high temperature (>600 C) and pressure (>1 MPa). The hot focus region is the most endangered zone exhibiting the highest creep strain rates. The exact level of temperature and pressure has an influence on the vessel failure time but not on the failure position. The failure time can be predicted with an uncertainty of 20 to 25%. This uncertainty is caused by the large scatter and the high temperature sensitivity of the viscoplastic properties of the RPV steel. Contrary to the hot focus region, the lower centre of the vessel head exhibits a higher strength because of the lower temperatures in this zone. The lower part moves down without significant deformation. Therefore it can be assumed, that the vessel failure can be retarded or prevented by supporting this range. The

  8. Pressure vessel integrity 1991

    International Nuclear Information System (INIS)

    Bhandari, S.; Doney, R.O.; McDonald, M.S.; Jones, D.P.; Wilson, W.K.; Pennell, W.E.

    1991-01-01

    This volume contains papers relating to the structural integrity assessment of pressure vessels and piping, with special emphasis on nuclear industry applications. The papers were prepared for technical sessions developed under the sponsorship of the ASME Pressure Vessels and Piping Division Committees for Codes and Standards, Computer Technology, Design and Analysis, and Materials Fabrication. They were presented at the 1991 Pressure Vessels and Piping Division Conference in San Diego, California, June 23-27. The primary objective of the sponsoring organization is to provide a forum for the dissemination and discussion of information on development and application of technology for the structural integrity assessment of pressure vessels and piping. This publication includes contributions from authors from Australia, France, Japan, Sweden, Switzerland, the United Kingdom, and the United States. The papers here are organized in six sections, each with a particular emphasis as indicated in the following section titles: Fracture Technology Status and Application Experience; Crack Initiation, Propagation and Arrest; Ductile Tearing; Constraint, Stress State, and Local-Brittle-Zones Effects; Computational Techniques for Fracture and Corrosion Fatigue; and Codes and Standards for Fatigue, Fracture and Erosion/Corrosion

  9. The reactor vessel steels

    International Nuclear Information System (INIS)

    Bilous, W.; Hajewska, E.; Szteke, W.; Przyborska, M.; Wasiak, J.; Wieczorkowski, M.

    2005-01-01

    In the paper the fundamental steels using in the construction of pressure vessel water reactor are discussed. The properties of these steels as well as the influence of neutron irradiation on its degradation in the time of exploitation are also done. (authors)

  10. Vacuum distilling vessel

    Energy Technology Data Exchange (ETDEWEB)

    Reik, H

    1928-12-27

    Vacuum distilling vessel for mineral oil and the like, characterized by the ring-form or polyconal stiffeners arranged inside, suitably eccentric to the casing, being held at a distance from the casing by connecting members of such a height that in the resulting space if necessary can be arranged vapor-distributing pipes and a complete removal of the residue is possible.

  11. GOLD PRESSURE VESSEL SEAL

    Science.gov (United States)

    Smith, A.E.

    1963-11-26

    An improved seal between the piston and die member of a piston-cylinder type pressure vessel is presented. A layer of gold, of sufficient thickness to provide an interference fit between the piston and die member, is plated on the contacting surface of at least one of the members. (AEC)

  12. Reactor vessel stud tensioner

    International Nuclear Information System (INIS)

    Malandra, L.J.; Beer, R.W.; Salton, R.B.; Spiegelman, S.R.; Cognevich, M.L.

    1982-01-01

    A quick-acting stud tensioner, for facilitating the loosening or tightening of a stud nut on a reactor vessel stud, has gripper jaws which when the tensioner is lowered into engagement with the upper end of the stud are moved inwards to grip the upper end and which when the tensioner is lifted move outward to release the upper end. (author)

  13. The pressure vessel for the NSF tandem

    International Nuclear Information System (INIS)

    Jones, C.W.

    1979-04-01

    The pressure vessel is a major component of the 30 MV tandem Van de Graaff electrostatic accelerator to be used in nuclear structure research at Daresbury Laboratory. The accelerator will be capable of accelerating the full range of ions in the form of a beam. Acceleration takes place in a vertical evacuated tube (beam tube) by means of a high potential on a terminal at the central position, the terminal and beam tube assembly being supported by an insulated stack structure within the pressure vessel. Under operating conditions the vessel is filled with sulphur hexafluoride gas (SF 6 ) at high pressure which acts as an insulating medium between the centre terminal and the vessel wall. The vessel is situated inside a concrete tower which besides supporting the injector room above the vessel also acts as radiation shielding around the accelerator. The report covers: functional requirements; fundamental considerations with regard to the design and procurement; detail design; materials; manufacture; acceptance test; surface treatment; final leak test. (U.K.)

  14. Gas-liquid contacting in mixing vessels

    International Nuclear Information System (INIS)

    Mann, R.

    1983-01-01

    This report by Dr. R. Mann of UMIST presents a critical survey of literature on the contacting of gases with liquids in stirred vessels. Research undertaken in the last fifteen years in analysed, and promising areas for future research are identified. The report deals with physical contacting, mass transfer between the gas and liquid phases and the utilisation of the stirred vessel as a gas-liquid reactor. Three sections are given on gas-liquid contacting: physical aspects; interphase mass transfer; and chemical reactions. It also discusses recent new approaches and includes a summary of conclusions, nomenclature and references

  15. PDX vacuum vessel stress analysis

    International Nuclear Information System (INIS)

    Nikodem, Z.D.

    1975-01-01

    A stress analysis of PDX vacuum vessel is described and the summary of results is presented. The vacuum vessel is treated as a toroidal shell of revolution subjected to an internal vacuum. The critical buckling pressure is calculated. The effects of the geometrical discontinuity at the juncture of toroidal shell head and cylindrical outside wall, and the concavity of the cylindrical wall are examined. An effect of the poloidal field coil supports and the vessel outside supports on the stress distribution in the vacuum vessel is determined. A method evaluating the influence of circular ports in the vessel wall on the stress level in the vessel is outlined

  16. United States Nuclear Regulatory Commission research program on core debris/concrete interactions and ex-vessel fission-product release

    International Nuclear Information System (INIS)

    Burson, S.B.

    1987-01-01

    The study of core debris/concrete interaction phenomena has been a significant element of the NRC's Severe Accident Research Program for a number of years. The CORCON and VANESA codes used to predict the consequences of high-temperature debris attack on concrete and fission-product aerosol release are state-of-the-art computational tools. The major thrust of current NRC sponsored research focuses on the refinement, verification, and validation of these codes. An overview of the analytical and experimental aspects of the NRC research program is presented

  17. Procurement of replacement pressure vessels for MURR

    International Nuclear Information System (INIS)

    Meyer, W.A. Jr.; Edwards, C.B. Jr.; McKibben, J.C.; Schoone, A.R.

    1989-01-01

    The University of Missouri Research Reactor Facility (MURR) located in Columbia, Missouri, is the highest powered, highest steady-state flux university research reactor in the United States. The reactor is a 10-MW pressurized loop, in-pool-type, light-water-moderated, beryllium-reflected, flux trap reactor. MURR has a compact core (0.033 m 3 ) composed of eight fuel elements of the materials test reactor type arranged as an annular right circular cylinder between the inner and outer aluminum pressure vessels. Conservative engineering judgment resulted in the decision in 1988 to purchase new inner and outer pressure vessels. This paper details the difficulties encountered in procuring replacements for aluminum pressure vessels built to standards that are no longer applicable in attempting to meet nuclear standards that are not applicable to nonferrous material

  18. Experimental investigation and numerical analysis to develop low-energy large-midwater trawls

    Science.gov (United States)

    Lee, Jihoon; Kim, Taeho; Lee, Chun-Woo; Park, Subong

    2017-12-01

    Fuel consumption in fisheries is a primary concern because of its effects on the environment and the costs incurred by fishermen. Many studies have been conducted to reduce the fuel consumption in fishing operations. Fuel consumption due to fishing gear during a fishing operation is generally related to the hydrodynamic resistance on the gear. This means that fuel consumption is proportional to the drag created by the towing speed. Based on numerical methods, this study suggests a new approach to reduce fuel consumption in fisheries. The results of the simulation are in good agreement with those of model experiments. The total as well as partial resistance forces on the gear are calculated by simulation. The simulation results suggest improved materials and gear structure for reducing the hydrodynamic forces on the gear while maintaining gear performance. The method for assessing the gear performance involves measuring the height and width of the net mouth. Furthermore, this study investigates the efficiency of a low-energy trawl from an economic point of view. The findings of this study will be useful in reducing greenhouse gas (GHG) emissions in fishing operations, and thereby contribute toward lowering fishing costs by saving fuel.

  19. Preliminary estimates of the abundance and fidelity of dolphins associating with a demersal trawl fishery.

    Science.gov (United States)

    Allen, Simon J; Pollock, Kenneth H; Bouchet, Phil J; Kobryn, Halina T; McElligott, Deirdre B; Nicholson, Krista E; Smith, Joshua N; Loneragan, Neil R

    2017-07-10

    The incidental capture of wildlife in fishing gear presents a global conservation challenge. As a baseline to inform assessments of the impact of bycatch on bottlenose dolphins (Tursiops truncatus) interacting with an Australian trawl fishery, we conducted an aerial survey to estimate dolphin abundance across the fishery. Concurrently, we carried out boat-based dolphin photo-identification to assess short-term fidelity to foraging around trawlers, and used photographic and genetic data to infer longer-term fidelity to the fishery. We estimated abundance at ≈ 2,300 dolphins (95% CI = 1,247-4,214) over the ≈ 25,880-km 2 fishery. Mark-recapture estimates yielded 226 (SE = 38.5) dolphins associating with one trawler and some individuals photographed up to seven times over 12 capture periods. Moreover, photographic and genetic re-sampling over three years confirmed that some individuals show long-term fidelity to trawler-associated foraging. Our study presents the first abundance estimate for any Australian pelagic dolphin community and documents individuals associating with trawlers over days, months and years. Without trend data or correction factors for dolphin availability, the impact of bycatch on this dolphin population's conservation status remains unknown. These results should be taken into account by management agencies assessing the impact of fisheries-related mortality on this protected species.

  20. Life Cycle Inventory Analysis for a Small-Scale Trawl Fishery in Sendai Bay, Japan

    Directory of Open Access Journals (Sweden)

    Kazuhito Watanabe

    2016-04-01

    Full Text Available A reduced environmental burden, while maintaining high quality and low cost, has become an important factor for achieving sustainability in the fisheries sector. The authors performed life cycle inventory (LCI analysis targeting the fish production for a small-scale trawl fishery including small trawlers operating in Sendai Bay, Japan. The average annual cumulative CO2 emissions for the small trawlers were 4.7 ton-CO2/ton-product and 8.3 ton-CO2/million Japanese yen (JPN. Total fuel consumption contributed to 97% of the global warming potential. The range of variation in the basic unit of CO2 for each small trawler was also elucidated. Energy conservation through lower fuel consumption is shown to be an effective measure for reducing CO2 in a small trawler fishery. Moreover, the authors examined the system boundary, the determination of the functional unit, and the allocation method of applying LCI analysis to fisheries. Finally, the economy and environment of small trawler fisheries are discussed as important factors for sustainable fisheries, and the life cycle approach is applied to a new fishery type in Japan.

  1. Vessels in Transit - Web Tool

    Data.gov (United States)

    Department of Transportation — A web tool that provides real-time information on vessels transiting the Saint Lawrence Seaway. Visitors may sort by order of turn, vessel name, or last location in...

  2. Reactor vessel sealing plug

    International Nuclear Information System (INIS)

    Dooley, R.A.

    1986-01-01

    An apparatus is described for sealing a cold leg nozzle of a nuclear reactor pressure vessel from a remote location comprising: at least one sealing plug for mechanically sealing the nozzle from the inside of the reactor pressure vessel. The sealing plug includes a plate and a cone assembly having an end part receptive in the nozzle, the plate being axially moveable relative to the cone assembly. The plate and cone assembly have confronting bevelled edges defining an opening therebetween. A primary O-ring is disposed about the opening and is supported on the bevelled edges, the plate being guidably mounted to the cone assembly for movement toward the cone assembly to radially expand the primary O-ring into sealing engagement with the nozzle. A means is included for providing relative movement between the outer plate and the cone assembly

  3. Mobile nuclear reactor containment vessel

    International Nuclear Information System (INIS)

    Thompson, R.E.; Spurrier, F.R.; Jones, A.R.

    1978-01-01

    A containment vessel for use in mobile nuclear reactor installations is described. The containment vessel completely surrounds the entire primary system, and is located as close to the reactor primary system components as is possible in order to minimize weight. In addition to being designed to withstand a specified internal pressure, the containment vessel is also designed to maintain integrity as a containment vessel in case of a possible collision accident

  4. Nuclear reactor vessel inspection apparatus

    International Nuclear Information System (INIS)

    Blackstone, E.G.; Lofy, R.A.; Williams, L.P.

    1979-01-01

    Apparatus for the in situ inspection of a nuclear reactor vessel to detect the location and character of flaws in the walls of the vessel, in the welds joining the various sections of the vessel, in the welds joining attachments such as nozzles, elbows and the like to the reactor vessel and in such attachments wherein an inspection head carrying one or more ultrasonic transducers follows predetermined paths in scanning the various reactor sections, welds and attachments

  5. Reactor vessel stud closure system

    International Nuclear Information System (INIS)

    Spiegelman, S.R.; Salton, R.B.; Beer, R.W.; Malandra, L.J.; Cognevich, M.L.

    1982-01-01

    A quick-acting stud tensioner apparatus for enabling the loosening or tightening of a stud nut on a reactor vessel stud. The apparatus is adapted to engage the vessel stud by closing a gripper around an upper end of the vessel stud when the apparatus is seated on the stud. Upon lifting the apparatus, the gripper releases the vessel stud so that the apparatus can be removed

  6. Reactor Pressure Vessel Steels

    Energy Technology Data Exchange (ETDEWEB)

    Van de Velde, J.; Fabry, A.; Van Walle, E.; Chaoudi, R

    1998-07-01

    SCK-CEN's R and D programme on Reactor Pressure Vessel (RPV) Steels in performed in support of the RVP integrity assessment. Its main objectives are: (1) to develop enhanced surveillance concepts by applying micromechanics and fracture-toughness tests to small specimens, and by performing damage modelling and microstructure characterization; (2) to demonstrate the applied methodology on a broad database; (3) to achieve regulatory acceptance and industrial use. Progress and achievements in 1999 are reported.

  7. Phenomenological vessel burst investigations

    International Nuclear Information System (INIS)

    Hippelein, K.W.; Julisch, P.; Muz, J.; Schiedermaier, J.

    1985-07-01

    Fourteen burst experiments have been carried out using vessels with circumferential and longitudinal flaws, for investigation of the fracture behaviour, i.e. the time-related fracture opening. The vessels had dimensions (outer diameter x wall thickness = 800 x 47 mm) which correspond to the dimensions of the main coolant piping of a 1300 MW e PWR. The test specimens had been made of the base-safe material 20 MnMoNi 55 and of a special, 22 NiMoCr 37 base alloy. The experimental conditions with regard to pressure and temperature have been chosen so as to correspond to normal operating conditions of a PWR (p∝17.5 MPa, T∝300 0 C), i.e. the flaws have been so dimensioned that failure was to be expected at a pressure of p∝17.5 MPa. As a rule, water has been used as the pressure medium, or in some cases air, in order to influence the time-dependent pressure decrease. Fluid and structural dynamics calculations have also been made. In order to determine the impact of a fast propagating crack on the leak-to-fracture curve, which normally is defined by quasistationary experiments, suitable tests have been made with large-volume, cylindrical vessels (outer diameter x wall thickness x length = 3000 x 21 x 14000 mm) made of the material WSt E 43. The leak-before-fracture criterion has been confirmed. (orig./HP) [de

  8. Blood Vessels in Allotransplantation.

    Science.gov (United States)

    Abrahimi, P; Liu, R; Pober, J S

    2015-07-01

    Human vascularized allografts are perfused through blood vessels composed of cells (endothelium, pericytes, and smooth muscle cells) that remain largely of graft origin and are thus subject to host alloimmune responses. Graft vessels must be healthy to maintain homeostatic functions including control of perfusion, maintenance of permselectivity, prevention of thrombosis, and participation in immune surveillance. Vascular cell injury can cause dysfunction that interferes with these processes. Graft vascular cells can be activated by mediators of innate and adaptive immunity to participate in graft inflammation contributing to both ischemia/reperfusion injury and allograft rejection. Different forms of rejection may affect graft vessels in different ways, ranging from thrombosis and neutrophilic inflammation in hyperacute rejection, to endothelialitis/intimal arteritis and fibrinoid necrosis in acute cell-mediated or antibody-mediated rejection, respectively, and to diffuse luminal stenosis in chronic rejection. While some current therapies targeting the host immune system do affect graft vascular cells, direct targeting of the graft vasculature may create new opportunities for preventing allograft injury and loss. © Copyright 2015 The American Society of Transplantation and the American Society of Transplant Surgeons.

  9. Ionizing radiations and blood vessels

    International Nuclear Information System (INIS)

    Vorob'ev, E.I.; Stepanov, R.P.

    1985-01-01

    Data on phenomenology of radiation-induced changes in blood vessels are systematized and authors' experience is generalized. Modern concepts about processes leading to vessel structure injury after irradiation is critically analyzed. Special attention is paid to reparation and compensation of X-ray vessel injury, consideration of which is not yet sufficiently elucidated in literature

  10. Ionizing radiations and blood vessels

    International Nuclear Information System (INIS)

    Vorob'ev, E.I.; Stepanov, R.P.

    1985-01-01

    Data on phenomeology of radiation changes of blood vessels are systemized and the authors' experience is generalyzed. A critical analysis of modern conceptions on processes resulting in vessel structure damage after irradiation, is given. Special attention is paid to reparation and compensation of radiation injury of vessels

  11. Stowing the Right Containers on Container Vessels

    DEFF Research Database (Denmark)

    Jensen, Rune Møller

    2014-01-01

    ’s largest container vessels using standard mathematical programming techniques and off-the-shelf solvers. The presentation will provide basic insight into the domain, with pointers to further information that enable you to join in this promising new path of operations research and business....

  12. Prestressed cast iron pressure vessels as burst-proof pressure vessels for innovative nuclear applications

    International Nuclear Information System (INIS)

    Froehling, W.; Boettcher, A.; Bounin, D.; Steinwarz, W.; Geiss, M.; Trauth, M.

    2000-01-01

    The amendment to the German Atomic Energy Act from July 28, 1994 requires that events 'whose occurrence is practically excluded by the measures against damages', i.e. events of the category residual risk, must not necessitate far reaching protective measures outside the plant. For a conventional reactor pressure vessel, the residual risk consists in the very small probability of a catastrophic failure (formation of a large fracture opening, bursting of the vessel). With a prestressed cast iron vessel (PCIV), the formation of a large fracture opening or bursting of the vessel, respectively, is impossible due to its design properties. Against this background the possibility of the use of this type of pressure vessel for lightwater reactors has been studied in the frame of a 'Working Group for Innovative Nuclear Technology', founded by different research institutes and industrial companies. Furthermore, it has been studied whether the use of the PCIV support the realization of a corecatcher system. The results are presented in this report. Already many years earlier, Siempelkamp has performed industrial development and Forschungszentrum Juelich related experimental and theoretical safety research for the PCIV as an innovative, bust-proof pressure vessel concept. This development of the PCIV as well as its safety properties are also presented in a conclusive manner. (orig.) [de

  13. Activities of the training vessel Umitaka-maru (KARE-15; UM-11-07 of the Tokyo University of Marine Science and Technology during the 53rd Japanese Antarctic Research Expedition in 2011/2012

    Directory of Open Access Journals (Sweden)

    Masato Moteki

    2015-11-01

    Full Text Available The training vessel Umitaka-maru of the Tokyo University of Marine Science and Technology (TUMSAT undertook a marine science cruise in the Indian sector of the Southern Ocean during the 2011/2012 austral summer. During the cruise, TUMSAT conducted five different collaborative research projects. These included two phase-VIII Japanese Antarctic Research Expedition (JARE-52 to -57 projects: "Responses of Antarctic Marine Ecosystems to Global Environmental Changes with Carbonate Systems", which is the sub-theme of the prioritized research project "Exploring Global Warming from Antarctica"; and the ordinary research project "Studies on Plankton Community Structure and Environment Parameters in the Southern Ocean". The other three collaborative research projects were those undertaken in conjunction with (1 the National Institute of Polar Research, entitled "Environment and Ecosystem Changes in the Southern Ocean"; (2 the Japan Agency for Marine-Earth Science and Technology (JAMSTEC, entitled "Deployment of the Southern Ocean Buoy" ; and (3 with Hokkaido University, entitled "Studies on Dynamics of Antarctic Bottom Water". The Umitaka-maru departed from Fremantle, Australia, on 27 December 2011, sailed to the study area around the marginal sea ice zone (mainly along 110°E and 140°E, and returned to Hobart, Australia, on 1 February 2012. The participants performed various net castings to qualitatively evaluate the vertical distribution of plankton communities, made physical observations, and measured chemical parameters. They also retrieved a year-round mooring that had been deployed the previous year, retrieved two surface drifting buoys that had been released by the ice breaker Shirase, and deployed a JAMSTEC buoy (m-TRITON. In addition, several acidified culture experiments using pteropods were conducted on board.

  14. Baking results of KSTAR vacuum vessel

    Energy Technology Data Exchange (ETDEWEB)

    Kim, S. T.; Kim, Y. J.; Kim, K. M.; Im, D. S.; Joung, N. Y.; Yang, H. L.; Kim, Y. S.; Kwon, M. [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2009-05-15

    The Korea Superconducting Tokamak Advanced Research (KSTAR) is an advanced superconducting tokamak designed to establish a scientific and technological basis for an attractive fusion reactor. The fusion energy in the tokamak device is released through fusion reactions of light atoms such as deuterium or helium in hot plasma state, of which temperature reaches several hundreds of millions Celsius. The high temperature plasma is created in the vacuum vessel that provides ultra high vacuum status. Accordingly, it is most important for the vacuum condition to keep clean not only inner space but also surface of the vacuum vessel to make high quality plasma. There are two methods planned to clean the wall surface of the KSTAR vacuum vessel. One is surface baking and the other is glow discharge cleaning (GDC). To bake the vacuum vessel, De-Ionized (DI) water is heated to 130 .deg. C and circulated in the passage between double walls of the vacuum vessel (VV) in order to bake the surface. The GDC operation uses hydrogen and inert gas discharges. In this paper, general configuration and brief introduction of the baking result will be reported.

  15. Baking results of KSTAR vacuum vessel

    International Nuclear Information System (INIS)

    Kim, S. T.; Kim, Y. J.; Kim, K. M.; Im, D. S.; Joung, N. Y.; Yang, H. L.; Kim, Y. S.; Kwon, M.

    2009-01-01

    The Korea Superconducting Tokamak Advanced Research (KSTAR) is an advanced superconducting tokamak designed to establish a scientific and technological basis for an attractive fusion reactor. The fusion energy in the tokamak device is released through fusion reactions of light atoms such as deuterium or helium in hot plasma state, of which temperature reaches several hundreds of millions Celsius. The high temperature plasma is created in the vacuum vessel that provides ultra high vacuum status. Accordingly, it is most important for the vacuum condition to keep clean not only inner space but also surface of the vacuum vessel to make high quality plasma. There are two methods planned to clean the wall surface of the KSTAR vacuum vessel. One is surface baking and the other is glow discharge cleaning (GDC). To bake the vacuum vessel, De-Ionized (DI) water is heated to 130 .deg. C and circulated in the passage between double walls of the vacuum vessel (VV) in order to bake the surface. The GDC operation uses hydrogen and inert gas discharges. In this paper, general configuration and brief introduction of the baking result will be reported

  16. TMI-2 Vessel Investigation Project integration report

    International Nuclear Information System (INIS)

    Wolf, J.R.; Rempe, J.L.; Stickler, L.A.; Korth, G.E.; Diercks, D.R.; Neimark, L.A.; Akers, D.W.; Schuetz, B.K.; Shearer, T.L.; Chavez, S.A.; Thinnes, G.L.; Witt, R.J.; Corradini, M.L.; Kos, J.A.

    1994-03-01

    The Three Mile Island Unit 2 (TMI-2) Vessel Investigation Project (VIP) was an international effort that was sponsored by the Nuclear Energy Agency of the Organization for Economic Cooperation and Development. The primary objectives of the VIP were to extract and examine samples from the lower head and to evaluate the potential modes of failure and the margin of structural integrity that remained in the TMI-2 reactor vessel during the accident. This report presents a summary of the major findings and conclusions that were developed from research during the VIP. Results from the various elements of the project are integrated to form a cohesive understanding of the vessel's condition after the accident

  17. Impact of discards of beam trawl fishing on the nematode community from the Tagus estuary (Portugal)

    Energy Technology Data Exchange (ETDEWEB)

    Franco, M.A. [Marine Biology Section, Biology Department, Ghent University, Krijgslaan 281 (S8), 9000 Gent (Belgium); Oceanography Institute, Faculty of Sciences, University of Lisbon, Campo Grande, 1749-016 Lisboa (Portugal); Steyaert, M. [Marine Biology Section, Biology Department, Ghent University, Krijgslaan 281 (S8), 9000 Gent (Belgium); Cabral, H.N. [Oceanography Institute, Faculty of Sciences, University of Lisbon, Campo Grande, 1749-016 Lisboa (Portugal); Tenreiro, R.; Chambel, L. [Instituto de Ciencia Aplicada e Tecnologia, Faculty of Sciences, University of Lisbon, Campo Grande, 1749-016 Lisboa (Portugal); Vincx, M. [Marine Biology Section, Biology Department, Ghent University, Krijgslaan 281 (S8), 9000 Gent (Belgium); Costa, M.J. [Oceanography Institute, Faculty of Sciences, University of Lisbon, Campo Grande, 1749-016 Lisboa (Portugal); Vanaverbeke, J. [Marine Biology Section, Biology Department, Ghent University, Krijgslaan 281 (S8), 9000 Gent (Belgium)], E-mail: jan.vanaverbeke@ugent.be

    2008-10-15

    The impact of dead discards, originating from beam trawl fishing on the nematode community from the Tagus estuary was investigated in terms of vertical distribution of the dominant nematode groups. Sediment cores were collected from a mud-flat from the Tagus estuary. Crangoncrangon (Linnaeus, 1758) carcasses were added to the surface of the cores, simulating the settling of dead discards on the sediment. The vertical distribution of the dominant nematode groups was determined up to 4 cm deep at four different moments in time post deposition (0, 2, 4 and 6 h) and compared to control cores. The C.crangon addition to the sediment led to the formation of black spots and therefore oxygen depleted areas at the sediment surface. The Chromadora/Ptycholaimellus group, normally dominant at the surface layer, migrated downwards due to their high sensibility to toxic conditions. Sabatieria presented the opposite trend and became the dominant group at the surface layer. Since Sabatieria is tolerant to oxygen stressed conditions and high sulphide concentrations, we suggest that it migrated opportunistically towards an unoccupied niche. Daptonema, Metachromadora and Terschellingia did not show any vertical migration, reflecting their tolerance to anoxic and high sulphidic conditions. Our study showed that an accumulation of dead discards at the sediment surface might therefore alter the nematode community vertical distribution. This effect is apparently closely related to toxic conditions in the sediment, induced by the deposition of C.crangon at the sediment surface. These alterations might be temporal and reflect an adaptation of the nematode community to dynamic intertidal environments.

  18. Impact of discards of beam trawl fishing on the nematode community from the Tagus estuary (Portugal)

    International Nuclear Information System (INIS)

    Franco, M.A.; Steyaert, M.; Cabral, H.N.; Tenreiro, R.; Chambel, L.; Vincx, M.; Costa, M.J.; Vanaverbeke, J.

    2008-01-01

    The impact of dead discards, originating from beam trawl fishing on the nematode community from the Tagus estuary was investigated in terms of vertical distribution of the dominant nematode groups. Sediment cores were collected from a mud-flat from the Tagus estuary. Crangoncrangon (Linnaeus, 1758) carcasses were added to the surface of the cores, simulating the settling of dead discards on the sediment. The vertical distribution of the dominant nematode groups was determined up to 4 cm deep at four different moments in time post deposition (0, 2, 4 and 6 h) and compared to control cores. The C.crangon addition to the sediment led to the formation of black spots and therefore oxygen depleted areas at the sediment surface. The Chromadora/Ptycholaimellus group, normally dominant at the surface layer, migrated downwards due to their high sensibility to toxic conditions. Sabatieria presented the opposite trend and became the dominant group at the surface layer. Since Sabatieria is tolerant to oxygen stressed conditions and high sulphide concentrations, we suggest that it migrated opportunistically towards an unoccupied niche. Daptonema, Metachromadora and Terschellingia did not show any vertical migration, reflecting their tolerance to anoxic and high sulphidic conditions. Our study showed that an accumulation of dead discards at the sediment surface might therefore alter the nematode community vertical distribution. This effect is apparently closely related to toxic conditions in the sediment, induced by the deposition of C.crangon at the sediment surface. These alterations might be temporal and reflect an adaptation of the nematode community to dynamic intertidal environments

  19. Pressure vessel lid

    International Nuclear Information System (INIS)

    Schoening, J.; Elter, C.; Becker, G.; Pertiller, S.

    1986-01-01

    The invention concerns a lid for closing openings in reactor pressure vessels containing helium, which is made as a circular casting with hollow spaces and a flat floor and is set on the opening and kept down. It consists of helium-tight metal cast material with sufficient temperature resistance. There are at least two concentric heat resistant seals let into the bottom of the lid. The bottom is in immediate contact with the container atmosphere and has hollow spaces in its inside in the area opposite to the opening. (orig./HP) [de

  20. [Small vessel cerebrovascular disease].

    Science.gov (United States)

    Cardona Portela, P; Escrig Avellaneda, A

    2018-05-09

    Small vessel vascular disease is a spectrum of different conditions that includes lacunar infarction, alteration of deep white matter, or microbleeds. Hypertension is the main risk factor, although the atherothrombotic lesion may be present, particularly in large-sized lacunar infarctions along with other vascular risk factors. MRI findings are characteristic and the lesions authentic biomarkers that allow differentiating the value of risk factors and defining their prognostic value. Copyright © 2018 SEH-LELHA. Publicado por Elsevier España, S.L.U. All rights reserved.

  1. Impact of natural (waves and currents) and anthropogenic (trawl) resuspension on the export of particulate matter to the open ocean: Application to the Gulf of Lion (NW Mediterranean)

    Science.gov (United States)

    Ferré, B.; Durrieu de Madron, X.; Estournel, C.; Ulses, C.; Le Corre, G.

    2008-08-01

    Modern sediment deposits on continental margins form a vast reservoir of particulate matter that is regularly affected by resuspension processes. Resuspension by bottom trawling on shelves with strong fishing activity can modify the scale of natural disturbance by waves and currents. Recent field data show that the impact of bottom trawls on fine sediment resuspension per unit surface is comparable with that of the largest storms. We assessed the impact of both natural and anthropogenic processes on the dispersal of riverborne particles and shelf sediments on the Gulf of Lion shelf. We performed realistic numerical simulations of resuspension and transport forced by currents and waves or by a fleet of bottom trawlers. Simulations were conducted for a 16-month period (January 1998-April 1999) to characterise the seasonal variability. The sediment dynamics takes into account bed armoring, ripple geometry and the cohesive and non-cohesive characteristics of the sediments. Essential but uncertain parameters (clay content, erosion fluxes and critical shear stress for cohesive sediment) were set with existing data. Resuspension by waves and currents was controlled by shear stress, whereas resuspension by trawls was controlled by density and distribution of the bottom trawler fleet. Natural resuspension by waves and currents mostly occurred during short seasonal episodes, and was concentrated on the inner shelf. Trawling-induced resuspension, in contrast, occurred regularly throughout the year and was concentrated on the outer shelf. The total annual erosion by trawls (5.6×10 6 t y -1, t for metric tonnes) was four orders of magnitude lower than the erosion induced by waves and currents (35.3×10 9 t y -1). However the net resuspension (erosion/deposition budget) for trawling (0.4×10 6 t y -1) was only one order of magnitude lower than that for waves and currents (9.2×10 6 t y -1). Off-shelf export concerned the finest fraction of the sediment (clays and fine silts

  2. An automated vessel segmentation of retinal images using multiscale vesselness

    International Nuclear Information System (INIS)

    Ben Abdallah, M.; Malek, J.; Tourki, R.; Krissian, K.

    2011-01-01

    The ocular fundus image can provide information on pathological changes caused by local ocular diseases and early signs of certain systemic diseases, such as diabetes and hypertension. Automated analysis and interpretation of fundus images has become a necessary and important diagnostic procedure in ophthalmology. The extraction of blood vessels from retinal images is an important and challenging task in medical analysis and diagnosis. In this paper, we introduce an implementation of the anisotropic diffusion which allows reducing the noise and better preserving small structures like vessels in 2D images. A vessel detection filter, based on a multi-scale vesselness function, is then applied to enhance vascular structures.

  3. Targeting Therapy Resistant Tumor Vessels

    Science.gov (United States)

    2008-08-01

    Morris LS. Hysterectomy vs. resectoscopic endometrial ablation for the control of abnormal uterine bleeding . A cost-comparative study. J Reprod Med 1994;39...after the antibody treatment contain a pericyte coat, vessel architecture is normal, the diameter of the vessels is smaller (dilated, abnormal vessels...involvement of proteases from inflammatory mast cells and functionally abnormal (Carmeliet and Jain, 2000; Pasqualini (Coussens et al., 1999) and other bone

  4. Americium behaviour in plastic vessels

    International Nuclear Information System (INIS)

    Legarda, F.; Herranz, M.; Idoeta, R.; Abelairas, A.

    2010-01-01

    The adsorption of 241 Am dissolved in water in different plastic storage vessels was determined. Three different plastics were investigated with natural and distilled waters and the retention of 241 Am by these plastics was studied. The same was done by varying vessel agitation time, vessel agitation speed, surface/volume ratio of water in the vessels and water pH. Adsorptions were measured to be between 0% and 70%. The adsorption of 241 Am is minimized with no water agitation, with PET or PVC plastics, and by water acidification.

  5. Americium behaviour in plastic vessels

    Energy Technology Data Exchange (ETDEWEB)

    Legarda, F.; Herranz, M. [Departamento de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (UPV/EHU), Alameda de Urquijo s/n, 48013 Bilbao (Spain); Idoeta, R., E-mail: raquel.idoeta@ehu.e [Departamento de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (UPV/EHU), Alameda de Urquijo s/n, 48013 Bilbao (Spain); Abelairas, A. [Departamento de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (UPV/EHU), Alameda de Urquijo s/n, 48013 Bilbao (Spain)

    2010-07-15

    The adsorption of {sup 241}Am dissolved in water in different plastic storage vessels was determined. Three different plastics were investigated with natural and distilled waters and the retention of {sup 241}Am by these plastics was studied. The same was done by varying vessel agitation time, vessel agitation speed, surface/volume ratio of water in the vessels and water pH. Adsorptions were measured to be between 0% and 70%. The adsorption of {sup 241}Am is minimized with no water agitation, with PET or PVC plastics, and by water acidification.

  6. Americium behaviour in plastic vessels.

    Science.gov (United States)

    Legarda, F; Herranz, M; Idoeta, R; Abelairas, A

    2010-01-01

    The adsorption of (241)Am dissolved in water in different plastic storage vessels was determined. Three different plastics were investigated with natural and distilled waters and the retention of (241)Am by these plastics was studied. The same was done by varying vessel agitation time, vessel agitation speed, surface/volume ratio of water in the vessels and water pH. Adsorptions were measured to be between 0% and 70%. The adsorption of (241)Am is minimized with no water agitation, with PET or PVC plastics, and by water acidification. Copyright 2009 Elsevier Ltd. All rights reserved.

  7. Development of a low commercial value fish-sausage from the fish trawling “mix” category

    Directory of Open Access Journals (Sweden)

    Juliana de Lima Brandão GUIMARÃES

    2018-05-01

    Full Text Available Abstract The decreasing stock of the main species consumed in Brazil has stimulated studies regarding the use and development of products using low commercial value species. The shrimp trawling modality produces a large volume of a “mix” category comprising low commercial value fish. However, it is necessary to develop products with greater practicality to meet the current demands of the Brazilian consumer. The aim of the present study was to develop a sausage using a low commercial value fish, the Brazilian flathead (Percophis brasiliensis , caught in the fish trawling “mix” category landed in Niterói/RJ, and perform physico-chemical, microbiological, toxicological and sensorial analyses. The centesimal composition of the analyzed fish were as follows: humidity 73.78%, proteins 16.17%, carbohydrates 3.75%, total lipids 4.41% and ash 1.78%. The microbiological and toxicological results were within the legislation standards. Twenty varieties of fatty acids (AG were detected, with the most frequent being palmitic acid (22.81%. Among the omega-3 series, the most frequent were eicosapentaenoic acid (5.36% and docosahexaenoic acid (15.95%. Regarding minerals, the most noteworthy were sodium, calcium and iron (1114.24 mg, 112.32 mg and 1.73 mg respectively. The sausage showed 87.30% acceptability. The results demonstrate that the low commercial value fish Brazilian flathead resulted in a viable product for use in fish technology, with excellent nutritional results.

  8. [Large vessel vasculitides].

    Science.gov (United States)

    Morović-Vergles, Jadranka; Puksić, Silva; Gracanin, Ana Gudelj

    2013-01-01

    Large vessel vasculitis includes Giant cell arteritis and Takayasu arteritis. Giant cell arteritis is the most common form of vasculitis affect patients aged 50 years or over. The diagnosis should be considered in older patients who present with new onset of headache, visual disturbance, polymyalgia rheumatica and/or fever unknown cause. Glucocorticoides remain the cornerstone of therapy. Takayasu arteritis is a chronic panarteritis of the aorta ant its major branches presenting commonly in young ages. Although all large arteries can be affected, the aorta, subclavian and carotid arteries are most commonly involved. The most common symptoms included upper extremity claudication, hypertension, pain over the carotid arteries (carotidynia), dizziness and visual disturbances. Early diagnosis and treatment has improved the outcome in patients with TA.

  9. Reactor pressure vessel embrittlement

    International Nuclear Information System (INIS)

    1992-07-01

    Within the framework of the IAEA extrabudgetary programme on the Safety of WWER-440/230 NPPs, a list of safety issues requiring broad studies of generic interest have been agreed upon by an Advisory Group who met in Vienna in September 1990. The list was later revised in the light of the programme findings. The information on the status of the issues, and on the amount of work already completed and under way in the various countries, needs to be compiled. Moreover, an evaluation of what further work is required to resolve each one of the issues is also necessary. In view of this, the IAEA has started the preparation of a series of status reports on the various issues. This report on the generic safety issue ''Reactor Pressure Vessel Embrittlement'' presents a comprehensive survey of technical information available in the field and identifies those aspects which require further investigation. 39 refs, 21 figs, 4 tabs

  10. Reactor containment vessel

    International Nuclear Information System (INIS)

    Ochiai, Kanehiro; Hayagumo, Sunao; Morikawa, Matsuo.

    1981-01-01

    Purpose: To safety and simplify the structure in a reactor containment vessel. Constitution: Steam flow channels with steam jetting ports communicating to coolants are provided between a communication channel and coolants in a pressure suppression chamber. Upon loss of coolant accidents, pressure in a dry well will increase, then force downwards water in an annulus portion and further flow out the water through steam jetting ports into a suppression pool. Thus, the steam flow channel is filled with steams or airs present in the dry well, which are released through the steam jetting ports into the pressure suppression chamber. Even though water is violently vibrated owing to the upward movement of air bubbles and condensation of steam bubbles, the annular portion and the steam jetting ports are filled with steams or the like, direct dynamic loads onto the structures such as communication channels can be avoided. (J.P.N.)

  11. How effective is electronic monitoring in mixed bottom-trawl fisheries?

    NARCIS (Netherlands)

    Helmond, van A.T.M.; Chen, C.; Poos, J.J.

    2015-01-01

    In the context of the landing obligation under the European Common Fisheries Policy, electronic monitoring (EM) is often presented as one of the solutions to fully document catches. EM includes video monitoring to record the catch handling process on board the vessels. This study evaluated the

  12. Activities of the training vessel Umitaka-maru (KARE16 ; UM-12-08 of the Tokyo University of Marine Science and Technology during the 54th Japanese Antarctic Research Expedition in 2012/2013

    Directory of Open Access Journals (Sweden)

    Yujiro Kitade

    2016-07-01

    Full Text Available A marine science cruise was undertaken in the Indian sector of the Southern Ocean during the 2012/2013 austral summer on the training vessel Umitaka-maru (KARE16; UM-12-08 of the Tokyo University of Marine Science and Technology (TUMSAT. A primary aim of the cruise was to carry out a TUMSAT and National Institute of Polar Research (NIPR collaborative project commissioned by the Ministry of Education, Culture, Sports, Science and Technology (MEXT, entitled“Japanese Antarctic Research Expedition (JARE Routine Observation: Physical and Chemical Oceanography”. In addition to the MEXT-commissioned project, two TUMSAT-NIPR collaborative projects were conducted: 1“Studies on Plankton Community Structure and Environment Parameters in the Southern Ocean”, which is one of the original research projects of the JARE phase VIII (JAREs-52 to -57 projects; and 2“Environment and Ecosystem Changes in the Southern Ocean”. The Umitaka-maru departed from Fremantle, Australia, on 31 December 2012, sailed to the study area situated along 110°E in the marginal sea ice zone, and returned to Hobart, Australia, on 24 January 2013. Detailed properties of the Antarctic bottom water were revealed from physical and chemical oceanographic observations collected using a conductivity-temperature-depth profiler deployed to near the seafloor in the marginal ice zone. In addition, participants performed various net castings to qualitatively evaluate the vertical distribution of plankton communities, and deployed two year-round mooring arrays to assess the dynamics of Antarctic bottom water.

  13. Change in plan for installation of nuclear reactor in No.1 atomic powered vessel of Japan Atomic Energy Research Institute (change in purpose of use and in method for nuclear reactor installation and spent fuel disposal) (report)

    International Nuclear Information System (INIS)

    1987-01-01

    This report, compiled by the Nuclear Safety Commission to be submitted to the Prime Minister, deals with studies concerning some changes in the plan for the installation of a nuclear reactor in the No.1 atomic powered vessel to be constructed under the Japan Atomic Energy Research Institute (changes in the purpose of its use and in the methods for the nuclear reactor installation and spent fuel disposal). The conclusions of and procedures for the examination and evaluation are presented and then detailes of the studies are described. The study on the location requirements for the incidental land facilities at Sekinehama covers various conditions concerning the location, geology, earthquakes, meteorology, hydrology and social environment. The study on the safety design of the nuclear reactor facilities deals with the reactor, fuel handling facilities and other auxiliary facilities, as well as various land facilities to be constructed at Sekinehama including the reactor facilities and other facilities for fuel handling, waste disposal and protection and management of radioactive rays. Evaluation of possible radiation emission is shown and the accident analysis is also addressed. (Nogami, K.)

  14. PCs and networking for oceanographic research vessels

    Digital Repository Service at National Institute of Oceanography (India)

    Desai, R.G.P.; Desa, E.; Vithayathil, G.

    on IBM PC compatibles. The computers are located in different laboratories and are dedicated to data collection from one or more instruments. They are integratEd. by a local area network for real time sharing and integration of data. The special...

  15. KONTUR - research vessel 'Meteor' voyage No. 58

    International Nuclear Information System (INIS)

    KONTUR strategy is to provide different types of measurements simultaneously: (i) a radiosonde network to provide the mean meteorological field, especially divergences and baroclinicity, (ii) air-craft missions to study convection as well as turbulence, and (iii) tethered ballon and surface equipment to provide vertical profiles of turbulent quantities throughout the atmospheric boundary layer. The experiment is carried out in the area of the German Bight. (orig./HP) [de

  16. Use of commercial vessels in survey augmentation: the size-frequency distribution

    Directory of Open Access Journals (Sweden)

    Eric N. Powell

    2006-09-01

    Full Text Available The trend towards use of commercial vessels to enhance survey data requires assessment of the advantages and limitations of various options for their use. One application is to augment information on size-frequency distributions obtained in multispecies trawl surveys where stratum boundaries and sampling density are not optimal for all species. Analysis focused on ten recreationally and commercially important species: bluefish, butterfish, Loligo squid, weakfish, summer flounder, winter flounder, silver hake (whiting, black sea bass, striped bass, and scup (porgy. The commercial vessel took 59 tows in the sampled domain south of Long Island, New York and the survey vessel 18. Black sea bass, Loligo squid, and summer flounder demonstrated an onshore-offshore gradient such that smaller fish were caught disproportionately inshore and larger fish offshore. Butterfish, silver hake, and weakfish were characterized by a southwest-northeast gradient such that larger fish were caught disproportionately northeast of the southwestern-most sector. All sizes of scup, striped bass, and bluefish were caught predominately inshore. Winter flounder were caught predominately offshore. The commercial vessel was characterized by an increased frequency of large catches for most species. Consequently, patchiness was assayed to be higher by the commercial vessel in nearly all cases. The size-frequency distribution obtained by the survey vessel for six of the ten species, bluefish, butterfish, Loligo squid, summer flounder, weakfish, and silver hake, could not be obtained by chance from the size-frequency distribution obtained by the commercial vessel. The difference in sample density did not significantly influence the size-frequency distribution. Of the six species characterized by significant differences in size-frequency distribution between boats, all but one was patchy at the population level and all had one or more size classes so characterized. Although the

  17. Analyses of changes in spatial distribution of the beam trawl fleet and their effects on the plaice and sole stock, 1990 - 2005

    NARCIS (Netherlands)

    Quirijns, F.J.; Rijnsdorp, A.D.; Grift, R.E.

    2006-01-01

    Management measures directed at limiting fishing effort may have had an influence on the behaviour of the beam trawl fleet that negatively affected the North Sea plaice and sole stocks. This study analyses trends in fleet behaviour and fishing pressure in relation to management measures proposed by

  18. A study of fish behaviour in the extension of a demersal trawl using a multi-compartment separator frame and SIT camera system

    DEFF Research Database (Denmark)

    Krag, Ludvig Ahm; Madsen, Niels; Karlsen, Junita

    2009-01-01

    A rigid separator frame with three vertically stacked codends was used to study fish behaviour in the extension piece of a demersal trawl. A video camera recorded fish as they encountered the separator frame. Ten hauls were conducted in a mixed species fishery in the northern North Sea. Fish...

  19. The vertical distribution of fish in the open water area of a deep temperate mesotrophic lake assessed by hydroacoustics and midwater trawling

    Czech Academy of Sciences Publication Activity Database

    Jůza, Tomáš; Frouzová, Jaroslava; Brämick, U.; Draštík, Vladislav; Mrkvička, Tomáš; Kubečka, Jan

    2012-01-01

    Roč. 97, č. 6 (2012), s. 509-525 ISSN 1434-2944 R&D Projects: GA AV ČR(CZ) IAA600960901 Institutional support: RVO:60077344 Keywords : smelt * vendace * trawling * hydroacoustics * Lake Werbellin Subject RIV: EH - Ecology, Behaviour Impact factor: 0.870, year: 2012

  20. Failure probability analysis on mercury target vessel

    International Nuclear Information System (INIS)

    Ishikura, Syuichi; Futakawa, Masatoshi; Kogawa, Hiroyuki; Sato, Hiroshi; Haga, Katsuhiro; Ikeda, Yujiro

    2005-03-01

    Failure probability analysis was carried out to estimate the lifetime of the mercury target which will be installed into the JSNS (Japan spallation neutron source) in J-PARC (Japan Proton Accelerator Research Complex). The lifetime was estimated as taking loading condition and materials degradation into account. Considered loads imposed on the target vessel were the static stresses due to thermal expansion and static pre-pressure on He-gas and mercury and the dynamic stresses due to the thermally shocked pressure waves generated repeatedly at 25 Hz. Materials used in target vessel will be degraded by the fatigue, neutron and proton irradiation, mercury immersion and pitting damages, etc. The imposed stresses were evaluated through static and dynamic structural analyses. The material-degradations were deduced based on published experimental data. As a result, it was quantitatively confirmed that the failure probability for the lifetime expected in the design is very much lower, 10 -11 in the safety hull, meaning that it will be hardly failed during the design lifetime. On the other hand, the beam window of mercury vessel suffered with high-pressure waves exhibits the failure probability of 12%. It was concluded, therefore, that the leaked mercury from the failed area at the beam window is adequately kept in the space between the safety hull and the mercury vessel by using mercury-leakage sensors. (author)

  1. Pressure vessel for nuclear reactors

    International Nuclear Information System (INIS)

    1975-01-01

    The invention applies to a pressure vessel for nuclear reactors whose shell, made of cast metal segments, has a steel liner. This liner must be constructed to withstand all operational stresses and to be easily repairable. The invention solves this problem by installing the liner at a certain distance from the inner wall of the pressure vessel shell and by filling this clearance with supporting concrete. Both the concrete and the steel liner must have a lower prestress than the pressure vessel shell. In order to avoid damage to the liner when prestressing the pressure vessel shell, special connecting elements are provided which consist of welded-on fastening elements projecting into recesses in the cast metal segments of the pressure vessel. Their design is described in detail. (TK) [de

  2. Irradiation embrittlement of pressure vessel steels

    International Nuclear Information System (INIS)

    Brumovsky, M.; Vacek, M.

    1975-01-01

    A Standard Research Programme on Irradiation Embrittlement of Pressure Vessel Steels was approved by the Coordinating Meeting on the 12th May 1972 at the Working Group on Engineering Aspects of Irradiation Embrittlement of Pressure Vessel Steels. This Working Group was set up by the International Atomic Energy Agency in Vienna. Seven countries with their research institutes agreed on doing irradiation experiments according to the approved programme on steel A533 B from the U.S. HSST Programme. The Czechoslovak contribution covering tensile and impact testing of non-irradiated steel and steel irradiated at 280degC to 1.3 x 10 23 n/m 2 (E above 1 MeV) is presented in this report. As an additional part the same set of experiments was carried out on two additional steels - A 542 and A 543, made in SKODA Works for comparison of their irradiation embrittlement and hardening with A533 B steel. (author)

  3. Containment vessel stability analysis

    International Nuclear Information System (INIS)

    Harstead, G.A.; Morris, N.F.; Unsal, A.I.

    1983-01-01

    The stability analysis for a steel containment shell is presented herein. The containment is a freestanding shell consisting of a vertical cylinder with a hemispherical dome. It is stiffened by large ring stiffeners and relatively small longitudinal stiffeners. The containment vessel is subjected to both static and dynamic loads which can cause buckling. These loads must be combined prior to their use in a stability analysis. The buckling loads were computed with the aid of the ASME Code case N-284 used in conjunction with general purpose computer codes and in-house programs. The equations contained in the Code case were used to compute the knockdown factors due to shell imperfections. After these knockdown factors were applied to the critical stress states determined by freezing the maximum dynamic stresses and combining them with other static stresses, a linear bifurcation analysis was carried out with the aid of the BOSOR4 program. Since the containment shell contained large penetrations, the Code case had to be supplemented by a local buckling analysis of the shell area surrounding the largest penetration. This analysis was carried out with the aid of the NASTRAN program. Although the factor of safety against buckling obtained in this analysis was satisfactory, it is claimed that the use of the Code case knockdown factors are unduly conservative when applied to the analysis of buckling around penetrations. (orig.)

  4. Pressure vessel design

    International Nuclear Information System (INIS)

    Annaratone, D.

    2007-01-01

    This book guides through general and fundamental problems of pressure vessel design. It moreover considers problems which seem to be of lower importance but which turn out to be crucial in the design phase. The basic approach is rigorously scientific with a complete theoretical development of the topics treated, but the analysis is always pushed so far as to offer concrete and precise calculation criteria that can be immediately applied to actual designs. This is accomplished through appropriate algorithms that lead to final equations or to characteristic parameters defined through mathematical equations. The first chapter describes how to achieve verification criteria, the second analyzes a few general problems, such as stresses of the membrane in revolution solids and edge effects. The third chapter deals with cylinders under pressure from the inside, while the fourth focuses on cylinders under pressure from the outside. The fifth chapter covers spheres, and the sixth is about all types of heads. Chapter seven discusses different components of particular shape as well as pipes, with special attention to flanges. The eighth chapter discusses the influence of holes, while the ninth is devoted to the influence of supports. Finally, chapter ten illustrates the fundamental criteria regarding fatigue analysis. Besides the unique approach to the entire work, original contributions can be found in most chapters, thanks to the author's numerous publications on the topic and to studies performed ad hoc for this book. (orig.)

  5. In vessel core melt progression phenomena

    International Nuclear Information System (INIS)

    Courtaud, M.

    1993-01-01

    For all light water reactor (LWR) accidents, including the so called severe accidents where core melt down can occur, it is necessary to determine the amount and characteristics of fission products released to the environment. For existing reactors this knowledge is used to evaluate the consequences and eventual emergency plans. But for future reactors safety authorities demand decrease risks and reactors designed in such a way that fission products are retained inside the containment, the last protective barrier. This requires improved understanding and knowledge of all accident sequences. In particular it is necessary to be able to describe the very complex phenomena occurring during in vessel core melt progression because they will determine the thermal and mechanical loads on the primary circuit and the timing of its rupture as well as the fission product source term. On the other hand, in case of vessel failure, knowledge of the physical and chemical state of the core melt will provide the initial conditions for analysis of ex-vessel core melt progression and phenomena threatening the containment. Finally a good understanding of in vessel phenomena will help to improve accident management procedures like Emergency Core Cooling System water injection, blowdown and flooding of the vessel well, with their possible adverse effects. Research and Development work on this subject was initiated a long time ago and is still in progress but now it must be intensified in order to meet the safety requirements of the next generation of reactors. Experiments, limited in scale, analysis of the TMI 2 accident which is a unique source of global information and engineering judgment are used to establish and assess physical models that can be implemented in computer codes for reactor accident analysis

  6. PWR vessel flaw distribution development

    International Nuclear Information System (INIS)

    Rosinski, S.T.; Kennedy, E.L.; Foulds, J.R.; Kinsman, K.M.

    1990-01-01

    This paper reports on PWR pressure vessels which operate under NRC rules and regulatory guides intended to prevent failure of the vessels. Plants failing to meet the operating criteria specified under these rules and regulations are required to analytically demonstrate fitness for service in order to continue operation. The initial flaw size or distribution of initial vessel flaws is a key input to the required vessel integrity analyses. However, the flaw distribution assumed in the development of the NRC Regulations and recommended for the plant specific analyses is potentially over-conservative. This is because the distribution is based on the limited amount of vessel inspection data available at the time the criteria were being developed and does not take full advantage of the more recent and reliable domestic vessel inspection results. The U.S. Department of Energy is funding an effort through Sandia National Laboratories to investigate the possibility of developing a new flaw distribution based on the increased amount and improved reliability of domestic vessel inspection data. Results of Phase I of the program indicate that state-of-the-art NDE systems' capabilities are sufficient for development of a new flaw distribution that could ultimately provide life extension benefits over the presently required operating practice

  7. Nuclear reactor vessel decontamination systems

    International Nuclear Information System (INIS)

    McGuire, P. J.

    1985-01-01

    There is disclosed in the present application, a decontamination system for reactor vessels. The system is operatable without entry by personnel into the contaminated vessel before the decontamination operation is carried out and comprises an assembly which is introduced into the vertical cylindrical vessel of the typical boiling water reactor through the open top. The assembly includes a circular track which is centered by guideways permanently installed in the reactor vessel and the track guides opposed pairs of nozzles through which water under very high pressure is directed at the wall for progressively cutting and sweeping a tenacious radioactive coating as the nozzles are driven around the track in close proximity to the vessel wall. The whole assembly is hoisted to a level above the top of the vessel by a crane, outboard slides on the assembly brought into engagement with the permanent guideways and the assembly progressively lowered in the vessel as the decontamination operation progresses. The assembly also includes a low pressure nozzle which forms a spray umbrella above the high pressure nozzles to contain radioactive particles dislodged during the decontamination

  8. Vacuum vessel for thermonuclear device

    International Nuclear Information System (INIS)

    Hagiwara, Koji; Imura, Yasuya.

    1979-01-01

    Purpose: To provide constituted method for easily performing baking of vacuum vessel, using short-circuiting segments. Constitution: At the time of baking, one turn circuit is formed by the vacuum vessel and short-circuiting segments, and current transformer converting the one turn circuit into a secondary circuit by the primary coil and iron core is formed, and the vacuum vessel is Joule heated by an induction current from the primary coil. After completion of baking, the short-circuiting segments are removed. (Kamimura, M.)

  9. PWR vessel inspection performance improvements

    International Nuclear Information System (INIS)

    Blair Fairbrother, D.; Bodson, Francis

    1998-01-01

    A compact robot for ultrasonic inspection of reactor vessels has been developed that reduces setup logistics and schedule time for mandatory code inspections. Rather than installing a large structure to access the entire weld inspection area from its flange attachment, the compact robot examines welds in overlapping patches from a suction cup anchor to the shell wall. The compact robot size allows two robots to be operated in the vessel simultaneously. This significantly reduces the time required to complete the inspection. Experience to date indicates that time for vessel examinations can be reduced to fewer than four days. (author)

  10. Radiation embrittlement of WWER-1000 reactor vessel steels

    International Nuclear Information System (INIS)

    Nikolaeva, A.V.; Nikolaev, Yu.A.; Kevorkyan, Yu.R.

    2001-01-01

    Results obtained on the blank samples of materials of the WWER-1000 vessels irradiated by low density neutron flux are discussed. Chemical composition of the materials is characterized by the low content of the impurities (copper and phosphorus) and high content of nickel. Dependence of the radiation embrittlement of the WWER-1000 vessel materials on metallurgic variables and damage dose is treated. The research showed that nickel largely enhanced the radiation embrittlement. New dependences for determination of the radiation embrittlement real rate of the WWER-1000 vessel materials and its conservative estimation were developed [ru

  11. In-service supervision of a prestressed concrete pressure vessel

    International Nuclear Information System (INIS)

    Zemann, H.; Mayer, N.; Amberg, C.

    1985-01-01

    On-line measurements of the physical state of a prestressed concrete pressure vessel and a comparison of the distribution of temperature, strain and stress within the concrete member to the optimized statical predictions and the criterions of layout yield to an efficient and economical method of operating the vessel with a high potential of safety. The requirements of instrumentation and the comparison with static calculations are discussed on the prototype vessel at Seibersdorf Research Center during the phase of construction and prestressing, the phase of the first thermal treatment (stabilization), the pressure tests and under the operating conditions of a high temperature reactor (150 0 C/50 bar). (Author)

  12. In-service supervision of a prestressed concrete pressure vessel

    International Nuclear Information System (INIS)

    Zemann, H.; Weissbacher, L.; Mayer, N.; Amberge, C.

    1985-01-01

    On-line measurements of the physical state of a prestressed concrete pressure vessel, and comparison with the design predictions of the distribution of temperature, strain and stress within the concrete member and the criteria of layout, provide an efficient and economical method of operating the vessel with a high potential of safety. The requirements of instrumentation and the comparison with static calculations are discussed with reference to the prototype vessel at Seibersdorf Research Centre during the phase of construction and prestressing, the phase of the first thermal treatment (stabilization), the pressure tests and under the operating conditions of a high temperature reactor (150 0 C, 50 bar). (author)

  13. Special enclosure for a pressure vessel

    International Nuclear Information System (INIS)

    Wedellsborg, B.W.; Wedellsborg, U.W.

    1993-01-01

    A pressure vessel enclosure is described comprising a primary pressure vessel, a first pressure vessel containment assembly adapted to enclose said primary pressure vessel and be spaced apart therefrom, a first upper pressure vessel jacket adapted to enclose the upper half of said first pressure vessel containment assembly and be spaced apart therefrom, said upper pressure vessel jacket having an upper rim and a lower rim, each of said rims connected in a slidable relationship to the outer surface of said first pressure vessel containment assembly, mean for connecting in a sealable relationship said upper rim of said first upper pressure vessel jacket to the outer surface of said first pressure vessel containment assembly, means for connecting in a sealable relationship said lower rim of said first upper pressure vessel jacket to the outer surface of said first pressure vessel containment assembly, a first lower pressure vessel jacket adapted to enclose the lower half of said first pressure vessel containment assembly and be spaced apart therefrom, said lower pressure vessel jacket having an upper rim connected in a slidable relationship to the outer surface of said first pressure vessel containment assembly, and means for connecting in a sealable relationship said upper rim of said first lower pressure vessel jacket to the outer surface of said first pressure vessel containment assembly, a second upper pressure vessel jacket adapted to enclose said first upper pressure vessel jacket and be spaced apart therefrom, said second upper pressure vessel jacket having an upper rim and a lower rim, each of said rims adapted to slidably engage the outer surface of said first upper pressure vessel jacket, means for sealing said rims, a second lower pressure vessel jacket adapted to enclose said first lower pressure vessel jacket and be spaced apart therefrom

  14. Role of radiation embrittlement in reactor vessel integrity assessment

    International Nuclear Information System (INIS)

    Marston, T.U.; Chexal, V.K.; Wyckoff, M.

    1982-01-01

    Reactor vessel integrity calculations are complex. The effect of radiation embrittlement on vessel material properties is a very important aspect of any vessel integrity evaluation. The importance of realistic (based on surveillance capsule results) rather than conservative estimates of the material properties (based on regulatory curves) cannot be overestimated. It is also important to make realistic thermal hydraulic and system operations assumptions. In addition, use of actual flaw sizes from in-service inspections (versus hypothetical flaw size selection) will promote realism. Important research results exist that need to be incorporated into the regulatory process. The authors believe results from current research and development efforts will demonstrate that, with reasonable assumptions and best estimate calculations, the safety of even the older reactor vessels with high copper content welds can be assured over their design lifetimes without the need for major fixes. The utilities, through EPRI and the vendors, have dedicated a significant effort to solving the pressurized thermal shock problem

  15. The Analysis of the Causes of Emergencies on the Vessels

    Directory of Open Access Journals (Sweden)

    Alicja Mrozowska

    2017-12-01

    Full Text Available The article discusses the results of research conducted on the vessels, covering a wide spectrum of issues relating to the exploitation of vessels of various flags, as well as operating security and safety systems on board. The main aim of the study was to collect numbers of data directly from the crew, for examples: indicate by the crew marine areas with the greatest probability of occurrence of casualties and incidents, trying to the definition the causes of their occurrence, prevention actions used on board and analyses operating safety systems used on the various type of vessels. The analysis of research became the basis to identify strengths and weaknesses areas of the vessel operation. The author proposes a solution to be implemented on board and emphasizes meaning of safety management system.

  16. 2013-2014 California Current Ecosystem (CCE14): Acoustic-Trawl Survey of Coastal Pelagic Fishes (Legs I and II); and Investigations of hake survey methods, life history, and associated ecosystem (Legs III and IV) (SH1405, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The 2014 acoustic-trawl method (ATM) project aboard Bell M. Shimada represents a joint effort between the SWFSC and the NWFSC in investigating elements of the...

  17. Underway meteorological, navigational, optical, physical, profile, time series and trawl data collected aboard NOAA Ship Gordon Gunter in the Gulf of Mexico from 2014-08-21 to 2014-09-30 (NODC Accession 0122396)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0122396 contains raw underway meteorological, navigational, optical, physical, profile, time series and trawl data logged by the Scientific Computer...

  18. Marine Fish and Shellfish Survey data from otter trawls in the Chukchi Sea from the OCEAN HOPE 3 and OSHORO MARU from 16 August 1990 to 31 July 1992 (NODC Accession 9400061)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine Fish and Shellfish Survey data were collected from otter trawls in the Chukchi Sea from the OCEAN HOPE. Data were collected by the University of Alaska from...

  19. Underway meteorological, navigational, optical, physical, time series and trawl data collected aboard NOAA Ship Bell M. Shimada in the North Pacific Ocean from 2013-04-06 to 2013-04-30 (NCEI Accession 0115912)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0115912 contains raw underway meteorological, navigational, optical, physical, time series and trawl data logged by the Scientific Computer System...

  20. Underway meteorological, navigational, optical, physical, profile, time series and trawl data collected aboard NOAA Ship Bell M. Shimada in the North Pacific Ocean from 2013-09-09 to 2013-09-16 (NODC Accession 0116842)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0116842 contains raw underway meteorological, navigational, optical, physical, profile, time series and trawl data logged by the Scientific Computer...

  1. 2013-2014 California Current Ecosystem (CCE14): Acoustic-Trawl Survey of Coastal Pelagic Fishes (Legs I and II); and Investigations of hake survey methods, life history, and associated ecosystem (Legs III and IV) (SH1405, ME70)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The 2014 acoustic-trawl method (ATM) project aboard Bell M. Shimada represents a joint effort between the SWFSC and the NWFSC in investigating elements of the...

  2. Underway meteorological, navigational, optical, physical, profile, time series and trawl data collected aboard NOAA Ship Gordon Gunter in the North Atlantic Ocean from 2014-03-11 to 2014-04-28 (NODC Accession 0118186)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0118186 contains raw underway meteorological, navigational, optical, physical, profile, time series and trawl data logged by the Scientific Computer...

  3. 2013 West Coast Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  4. 2011 West Coast Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  5. 2013 Great Lakes Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  6. 2011 Great Lakes Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  7. 2011 East Coast Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  8. Coastal Discard Logbook Survey (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains data on the type and amount of marine resources that are discarded or interacted with by vessels that are selected to report to the Southeast...

  9. SC/OQ Vessel Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Data tables holding information for the Surf Clam/Ocean Quahog vessel and dealer/processor logbooks (negative and positive), as well as individual tag information...

  10. Vessel Permit System Data Set

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — GARFO issues federal fishing permits annually to owners of fishing vessels who fish in the Greater Atlantic region, as required by federal regulation. These permits...

  11. Reactor pressure vessel status report

    International Nuclear Information System (INIS)

    Strosnider, J.; Wichman, K.; Elliot, B.

    1994-12-01

    This report gives a brief description of the reactor pressure vessel (RPV), followed by a discussion of the radiation embrittlement of RPV beltline materials and the two indicators for measuring embrittlement, the end-of-license (EOL) reference temperature and the EOL upper-shelf energy. It also summarizes the GL 92-01 effort and presents, for all 37 boiling water reactor plants and 74 pressurized water reactor plants in the United States, the current status of compliance with regulatory requirements related to ensuring RPV integrity. The staff has evaluated the material data needed to predict neutron embrittlement of the reactor vessel beltline materials. These data will be stored in a computer database entitled the reactor vessel integrity database (RVID). This database will be updated annually to reflect the changes made by the licensees in future submittals and will be used by the NRC staff to assess the issues related to vessel structural integrity

  12. Reactor-vessel-sectioning demonstration

    International Nuclear Information System (INIS)

    Lundgren, R.A.

    1981-07-01

    A successful technical demonstration of simulated reactor vessel sectioning was completed using the combined techniques of air arc gouging and flame cutting. A 4-ft x 3-ft x 9-in. thick sample was fabricated of A36 carbon steel to simulate a reactor vessel wall. A 1/4-in layer of stainless steel (SS) was tungsten inert gas (TIG)-welded to the carbon steel. Several techniques were considered to section the simulated reactor vessel: an air arc gouger was chosen to penetrate the stainless steel, and flame cutting was selected to sever the carbon steel. After the simulated vessel was successfully cut from the SS side, another cut was made, starting from the carbon steel side. This cut was also successful. Cutting from the carbon steel side has the advantages of cost reduction since the air arc gouging step is eliminated and contamination controlled because the molten metal is blown inward

  13. Power reactor pressure vessel benchmarks

    International Nuclear Information System (INIS)

    Rahn, F.J.

    1978-01-01

    A review is given of the current status of experimental and calculational benchmarks for use in understanding the radiation embrittlement effects in the pressure vessels of operating light water power reactors. The requirements of such benchmarks for application to pressure vessel dosimetry are stated. Recent developments in active and passive neutron detectors sensitive in the ranges of importance to embrittlement studies are summarized and recommendations for improvements in the benchmark are made. (author)

  14. Prosopomorphic vessels from Moesia Superior

    Directory of Open Access Journals (Sweden)

    Nikolić Snežana

    2008-01-01

    Full Text Available The prosopomorphic vessels from Moesia Superior had the form of beakers varying in outline but similar in size. They were wheel-thrown, mould-made or manufactured by using a combination of wheel-throwing and mould-made appliqués. Given that face vessels are considerably scarcer than other kinds of pottery, more than fifty finds from Moesia Superior make an enviable collection. In this and other provinces face vessels have been recovered from military camps, civilian settlements and necropolises, which suggests that they served more than one purpose. It is generally accepted that the faces-masks gave a protective role to the vessels, be it to protect the deceased or the family, their house and possessions. More than forty of all known finds from Moesia Superior come from Viminacium, a half of that number from necropolises. Although tangible evidence is lacking, there must have been several local workshops producing face vessels. The number and technological characteristics of the discovered vessels suggest that one of the workshops is likely to have been at Viminacium, an important pottery-making centre in the second and third centuries.

  15. Vacuum vessel for thermonuclear device

    International Nuclear Information System (INIS)

    Kikuchi, Mitsuru; Kurita, Gen-ichi; Onozuka, Masaki; Suzuki, Masaru.

    1997-01-01

    Heat of inner walls of a vacuum vessel that receive radiation heat from plasmas by way of first walls is removed by a cooling medium flowing in channels for cooling the inner walls. Nuclear heat generation of constitutional materials of the vacuum vessel caused by fast neutrons and γ rays is removed by a cooling medium flowing in cooling channels disposed in the vacuum vessel. Since the heat from plasmas and the nuclear heat generation are removed separately, the amount of the cooling medium flowing in the channels for cooling inner walls is increased for cooling a great amount of heat from plasmas while the amount of the cooling medium flowing in the channels for cooling the inside of the vacuum vessel is reduced for cooling the small amount of nuclear heat generation. Since the amount of the cooling medium can thus be optimized, the capacity of the facilities for circulating the cooling medium can be reduced. In addition, since the channels for cooling the inner walls and the channels of cooling medium formed in the vacuum vessel are disposed to the inner walls of the vacuum vessel on the side opposite to plasmas, integrity of the channels relative to leakage of the cooling medium can be ensured. (N.H.)

  16. Vacuum vessel for thermonuclear device

    Energy Technology Data Exchange (ETDEWEB)

    Kikuchi, Mitsuru; Kurita, Gen-ichi [Japan Atomic Energy Research Inst., Tokyo (Japan); Onozuka, Masaki; Suzuki, Masaru

    1997-07-31

    Heat of inner walls of a vacuum vessel that receive radiation heat from plasmas by way of first walls is removed by a cooling medium flowing in channels for cooling the inner walls. Nuclear heat generation of constitutional materials of the vacuum vessel caused by fast neutrons and {gamma} rays is removed by a cooling medium flowing in cooling channels disposed in the vacuum vessel. Since the heat from plasmas and the nuclear heat generation are removed separately, the amount of the cooling medium flowing in the channels for cooling inner walls is increased for cooling a great amount of heat from plasmas while the amount of the cooling medium flowing in the channels for cooling the inside of the vacuum vessel is reduced for cooling the small amount of nuclear heat generation. Since the amount of the cooling medium can thus be optimized, the capacity of the facilities for circulating the cooling medium can be reduced. In addition, since the channels for cooling the inner walls and the channels of cooling medium formed in the vacuum vessel are disposed to the inner walls of the vacuum vessel on the side opposite to plasmas, integrity of the channels relative to leakage of the cooling medium can be ensured. (N.H.)

  17. Automated method for identification and artery-venous classification of vessel trees in retinal vessel networks.

    Science.gov (United States)

    Joshi, Vinayak S; Reinhardt, Joseph M; Garvin, Mona K; Abramoff, Michael D

    2014-01-01

    The separation of the retinal vessel network into distinct arterial and venous vessel trees is of high interest. We propose an automated method for identification and separation of retinal vessel trees in a retinal color image by converting a vessel segmentation image into a vessel segment map and identifying the individual vessel trees by graph search. Orientation, width, and intensity of each vessel segment are utilized to find the optimal graph of vessel segments. The separated vessel trees are labeled as primary vessel or branches. We utilize the separated vessel trees for arterial-venous (AV) classification, based on the color properties of the vessels in each tree graph. We applied our approach to a dataset of 50 fundus images from 50 subjects. The proposed method resulted in an accuracy of 91.44% correctly classified vessel pixels as either artery or vein. The accuracy of correctly classified major vessel segments was 96.42%.

  18. The TPX vacuum vessel and in-vessel components

    International Nuclear Information System (INIS)

    Heitzenroeder, P.; Bialek, J.; Ellis, R.; Kessel, C.; Liew, S.

    1994-01-01

    The Tokamak Physics Experiment (TPX) is a superconducting tokamak with double-null diverters. TPX is designed for 1,000-second discharges with the capability of being upgraded to steady state operation. High neutron yields resulting from the long duration discharges require that special consideration be given to materials and maintainability. A unique feature of the TPX is the use of a low activation, titanium alloy vacuum vessel. Double-wall vessel construction is used since it offers an efficient solution for shielding, bakeout and cooling. Contained within the vacuum vessel are the passive coil system, Plasma Facing Components (PFCs), magnetic diagnostics, and the internal control coils. All PFCs utilize carbon-carbon composites for exposed surfaces

  19. Midland reactor pressure vessel flaw distribution

    International Nuclear Information System (INIS)

    Foulds, J.R.; Kennedy, E.L.; Rosinski, S.T.

    1993-12-01

    The results of laboratory nondestructive examination (NDE), and destructive cross-sectioning of selected weldment sections of the Midland reactor pressure vessel were analyzed per a previously developed methodology in order to develop a flaw distribution. The flaw distributions developed from the NDE results obtained by two different ultrasonic test (UT) inspections (Electric Power Research Institute NDE Center and Pacific Northwest Laboratories) were not statistically significantly different. However, the distribution developed from the NDE Center's (destructive) cross-sectioning-based data was found to be significantly different than those obtained through the UT inspections. A fracture mechanics-based comparison of the flaw distributions showed that the cross-sectioning-based data, conservatively interpreted (all defects considered as flaws), gave a significantly lower vessel failure probability when compared with the failure probability values obtained using the UT-based distributions. Given that the cross-sectioning data were reportedly biased toward larger, more significant-appearing (by UT) indications, it is concluded that the nondestructive examinations produced definitively conservative results. In addition to the Midland vessel inspection-related analyses, a set of twenty-seven numerical simulations, designed to provide a preliminary quantitative assessment of the accuracy of the flaw distribution method used here, were conducted. The calculations showed that, in more than half the cases, the analysis produced reasonably accurate predictions

  20. Hypercholesterolemia induced cerebral small vessel disease.

    Science.gov (United States)

    Kraft, Peter; Schuhmann, Michael K; Garz, Cornelia; Jandke, Solveig; Urlaub, Daniela; Mencl, Stine; Zernecke, Alma; Heinze, Hans-Jochen; Carare, Roxana O; Kleinschnitz, Christoph; Schreiber, Stefanie

    2017-01-01

    While hypercholesterolemia plays a causative role for the development of ischemic stroke in large vessels, its significance for cerebral small vessel disease (CSVD) remains unclear. We thus aimed to understand the detailed relationship between hypercholesterolemia and CSVD using the well described Ldlr-/- mouse model. We used Ldlr-/- mice (n = 16) and wild-type (WT) mice (n = 15) at the age of 6 and 12 months. Ldlr-/- mice develop high plasma cholesterol levels following a high fat diet. We analyzed cerebral capillaries and arterioles for intravascular erythrocyte accumulations, thrombotic vessel occlusions, blood-brain barrier (BBB) dysfunction and microbleeds. We found a significant increase in the number of erythrocyte stases in 6 months old Ldlr-/- mice compared to all other groups (P hypercholesterolemia is related to a thrombotic CSVD phenotype, which is different from hypertension-related CSVD that associates with a hemorrhagic CSVD phenotype. Our data demonstrate a relationship between hypercholesterolemia and the development of CSVD. Ldlr-/- mice appear to be an adequate animal model for research into CSVD.

  1. BWR vessel and internals project (BWRVIP)

    International Nuclear Information System (INIS)

    Bilanin, W.J.; Dyle, R.L.

    1996-01-01

    Recent Boiling Water Reactor (BWR) inspections indicate that Intergranular Stress Corrosion Cracking (IGSCC) is a significant technical issue for some BWR internals. IN response, the Boiling Water Reactor Vessel and Internals Project (BWRVIP) was formed by an associated of domestic and international utilities which own and operate BWRs. The project is identifying or developing generic, cost-effective strategies for managing degradation of reactor internals from which each utility can select the alternative most appropriate for their plant. The Electric Power Research Institute manages the technical program, implementing the utility defined programs. The BWRVIP is organized into four technical tasks: Assessment, Inspection, Repair and Mitigation. An Integration task coordinates the work. The goal of the Assessment task is to develop methodologies for evaluation of vessel and internal components in support of decisions for operation, inspection, mitigation or repair. The goal of the Inspection task is to develop and assess effective and predictable inspection techniques which can be used to determine the condition of BWR vessel and internals that are potentially susceptible to service-related SCC degradation. The goal of the Repair task is to assure the availability of cost-effective repair/replacement alternatives. The goal of the Mitigation task is to develop and demonstrate countermeasures for SCC degradation. This paper summarizes the BWRVIP approach for addressing BWR internals SCC degradation and illustrates how utilities are utilizing BWRVIP products to successfully manage the effect of SCC on core shrouds

  2. Sealing analysis for nuclear vessel of PWR

    International Nuclear Information System (INIS)

    Qu, J.; Dou, Y.

    1987-01-01

    Although design by analysis of pressure vessel has become a requirement in all codes for more than 20 years, sealing design for nuclear components is still too complicated and there are yet no criteria about this aspect, even though in the well-known ASME Boiler and Pressure Vessel Code. Thus it is of significance to undertake researches of transient sealing tests and analysis for nuclear vessel. Since 1960s great progress has been made in analytic computer program, which takes flange as a rigid ring. Actually, however, there are elastic or elastoplastic contacts on flange mating surface. Chen (1979) gave a mixed finite element method, using a condensing flexible matrix skill, to solve two-body contact problem. On the basis of axisymmetric stress and thermal analysis of finite element method and on accepting Chen's (1979) idea of mixed finite element method, we have developed a computer program for sealing analysis, named SMEC, which considers bolt loading changes and temperature effects. (orig./GL)

  3. Clay Corner: Recreating Chinese Bronze Vessels.

    Science.gov (United States)

    Gamble, Harriet

    1998-01-01

    Presents a lesson where students make faux Chinese bronze vessels through slab or coil clay construction after they learn about the history, function, and design of these vessels. Utilizes a variety of glaze finishes in order to give the vessels an aged look. Gives detailed guidelines for creating the vessels. (CMK)

  4. From fishing to fish processing: Separation of fish from crustaceans in the Norway lobster-directed multispecies trawl fishery improves seafood quality

    DEFF Research Database (Denmark)

    Karlsen, Junita Diana; Krag, Ludvig Ahm; Albertsen, Christoffer Moesgaard

    2015-01-01

    Fishing gears have negative impacts on seafood quality, especially on fish in the mixed trawl fishery targeting Norway lobster (Nephrops norvegicus). In this fishery, which is worth about €80 millions in Denmark alone, the quality of fish can be significantly improved by simple gear changes....... A trawl codend divided into an upper and lower codend was designed to separate fish from Norway lobster during the fishing process by encourage fish to swim into the upper codend by using a frame at the entrance of the lower codend. Separate codends for fish and Norway lobster in the same gear provide...... with hard or spiny surfaces due to successful separation of fish and Norway lobster into the upper and lower codends, respectively, and by lower catch weight in the upper codend of the test codend compared with the standard codend. The decrease in damages may also improve quality indirectly by inflicting...

  5. Fine-scale environmental effects on Cape hake survey catch rates in the Northern Benguela, using data from a trawl-mounted instrument package

    DEFF Research Database (Denmark)

    Kainge, Paulus Inekela; Wieland, Kai

    2017-01-01

    We investigated fine-scale effects of environmental variables associated with habitat distribution for 4 size groups of Cape hakes, Merluccius capensis and M. paradoxus, using generalized additive models (GAMs) with a negative binominal error distribution. This study took place during the Namibian...... hake trawl survey of 2016, and was made possible for the first time in Namibia by collecting oceanographic information with a trawl-mounted instrument package concurrently with the catch data. Depth, geographical position, bottom oxygen and bottom temperature had the most pronounced effect on the catch...... rates of both hake species, whereas solar zenith angle representing diel effects and surface layer chlorophyll appeared to be less important. The explained deviance for the best models ranged from 71.4% for M. capensis to 92.7% for M. paradoxus between 43 and 57 cm in length. Differences in catch rates...

  6. Vacuum vessel for thermonuclear device

    International Nuclear Information System (INIS)

    Kikuchi, Mitsuru; Nagashima, Keisuke; Suzuki, Masaru; Onozuka, Masaki.

    1997-01-01

    A vacuum vessel main body and structural members at the inside and the outside of the vacuum vessel main body are constituted by structural materials activated by irradiation of neutrons from plasmas such as stainless steels. Shielding members comprising tungsten or molybdenum are disposed on the surface of the vacuum vessel main body and the structural members of the inside and the outside of the main body. The shielding members have a function also as first walls or a seat member for the first walls. Armor tiles may be disposed to the shielding members. The shielding members and the armor tiles are secured to a securing seat member disposed, for example, to an inner plate of the vacuum vessel main body by bolts. Since the shielding members are disposed, it is not necessary to constitute the vacuum vessel main body and the structural members at the inside and the outside thereof by using a low activation material which is less activated, such as a titanium alloy. (I.N.)

  7. Vacuum vessel for thermonuclear device

    Energy Technology Data Exchange (ETDEWEB)

    Kikuchi, Mitsuru; Nagashima, Keisuke [Japan Atomic Energy Research Inst., Tokyo (Japan); Suzuki, Masaru; Onozuka, Masaki

    1997-07-11

    A vacuum vessel main body and structural members at the inside and the outside of the vacuum vessel main body are constituted by structural materials activated by irradiation of neutrons from plasmas such as stainless steels. Shielding members comprising tungsten or molybdenum are disposed on the surface of the vacuum vessel main body and the structural members of the inside and the outside of the main body. The shielding members have a function also as first walls or a seat member for the first walls. Armor tiles may be disposed to the shielding members. The shielding members and the armor tiles are secured to a securing seat member disposed, for example, to an inner plate of the vacuum vessel main body by bolts. Since the shielding members are disposed, it is not necessary to constitute the vacuum vessel main body and the structural members at the inside and the outside thereof by using a low activation material which is less activated, such as a titanium alloy. (I.N.)

  8. Molten material-containing vessel

    International Nuclear Information System (INIS)

    Akagawa, Katsuhiko

    1998-01-01

    The molten material-containing vessel of the present invention comprises a vessel main body having an entrance opened at the upper end, a lid for closing the entrance, an outer tube having an upper end disposed at the lower surface of the lid, extended downwardly and having an closed lower end and an inner tube disposed coaxially with the outer tube. When a molten material is charged from the entrance to the inside of the vessel main body of the molten material-containing vessel and the entrance is closed by the lid, the outer tube and the inner tube are buried in the molten material in the vessel main body, accordingly, a fluid having its temperature elevated by absorption of the heat of the molten material rises along the inner circumferential surface of the outer tube, abuts against the lower surface of the lid and cooled by exchanging heat with the lid and forms a circulating flow. Since the heat in the molten material is continuously absorbed by the fluid, transferred to the lid and released from the lid to the atmospheric air, heat releasing efficiency can be improved compared with conventional cases. (N.H.)

  9. Light Water Reactor-Pressure Vessel Surveillance project computer system

    International Nuclear Information System (INIS)

    Merriman, S.H.

    1980-10-01

    A dedicated process control computer has been implemented for regulating the metallurgical Pressure Vessel Wall Benchmark Facility (PSF) at the Oak Ridge Research Reactor. The purpose of the PSF is to provide reliable standards and methods by which to judge the radiation damage to reactor pressure vessel specimens. Benchmark data gathered from the PSF will be used to improve and standardize procedures for assessing the remaining safe operating lifetime of aging reactors. The computer system controls the pressure vessel specimen environment in the presence of gamma heating so that in-vessel conditions are simulated. Instrumented irradiation capsules, in which the specimens are housed, contain temperature sensors and electrical heaters. The computer system regulates the amount of power delivered to the electrical heaters based on the temperature distribution within the capsules. Time-temperature profiles are recorded along with reactor conditions for later correlation with specimen metallurgical changes

  10. Firefighter's compressed air breathing system pressure vessel development program

    Science.gov (United States)

    Beck, E. J.

    1974-01-01

    The research to design, fabricate, test, and deliver a pressure vessel for the main component in an improved high-performance firefighter's breathing system is reported. The principal physical and performance characteristics of the vessel which were required are: (1) maximum weight of 9.0 lb; (2) maximum operating pressure of 4500 psig (charge pressure of 4000 psig); (3) minimum contained volume of 280 in. 3; (4) proof pressure of 6750 psig; (5) minimum burst pressure of 9000 psig following operational and service life; and (6) a minimum service life of 15 years. The vessel developed to fulfill the requirements described was completely sucessful, i.e., every category of performence was satisfied. The average weight of the vessel was found to be about 8.3 lb, well below the 9.0 lb specification requirement.

  11. Crack growth rates in vessel head penetration materials

    International Nuclear Information System (INIS)

    Gomez Briceno, D.; Lapena, J.; Blazquez, F.

    1994-01-01

    The cracks detected in reactor vessel head penetrations in certain European plants have been attributed to Primary Water Stress Corrosion Cracking (PWSCC). The penetrations in question are made from Inconel 600. The susceptibility of this alloy to PWSCC has been widely studied in relation to use of this material for steam generator tubes. When the first reactor vessel head penetration cracks were detected, most of the available data on crack propagation rates were from test specimens made from steam generator tubes and tested under conditions that questioned the validity of these data for assessment of the evolution of cracks in penetrations. For this reason, the scope of the Spanish Research Project on the Inspection and Repair of PWR reactor vessel head penetrations included the acquisition of data on crack propagation rates in Inconel 600, representative of the materials used for vessel head penetrations. (authors). 1 fig., 2 tabs., 6 refs

  12. Influence of the hydrodynamic conditions on the accessibility of Aristeus antennatus and other demersal species to the deep water trawl fishery off the Balearic Islands (western Mediterranean)

    OpenAIRE

    Amores, Ángel; Rueda, Lucía; Monserrat, Sebastià; Guijarro, Beatriz; Pasqual, Catalina; Massutí, Enric

    2013-01-01

    Monthly catches per unit of effort (CPUE) of adult red shrimp (. Aristeus antennatus), reported in the deep water bottom trawl fishery developed on the Sóller fishing ground off northern Mallorca (Western Mediterranean), and the mean ocean surface vorticity in the surrounding areas are compared between 2000 and 2010. A good correlation is found between the rises in the surrounding surface vorticity and the drops in the CPUE of the adult red shrimp. This correlation could be explained by assum...

  13. Great lakes prey fish populations: a cross-basin overview of status and trends based on bottom trawl surveys, 1978-2012

    Science.gov (United States)

    Gorman, Owen T.

    2012-01-01

    The assessment of prey fish stocks in the Great Lakes have been conducted annually with bottom trawls since the 1970s by the Great Lakes Science Center, sometimes assisted by partner agencies. These stock assessments provide data on the status and trends of prey fish that are consumed by important commercial and recreational fishes. Although all these annual surveys are conducted using bottom trawls, they differ among the lakes in the proportion of the lake covered, seasonal timing, bottom trawl gear used, and the manner in which the trawl is towed (across or along bottom contours). Because each assessment is unique in one or more important aspects, direct comparison of prey fish catches among lakes is not straightforward. However, all of the assessments produce indices of abundance or biomass that can be standardized to facilitate comparisons of status and trends across all the Great Lakes. In this report, population indices were standardized to the highest value for a time series within each lake for the following principal prey species: cisco (Coregonus artedi), bloater (C. hoyi), rainbow smelt (Osmerus mordax), and alewife (Alosa pseudoharengus). Indices were also provided for round goby (Neogobius melanostomus), an invasive fish that has proliferated throughout the basin over the past 18 years. These standardized indices represent the best available long-term indices of relative abundance for these fishes across all of the Great Lakes. In this report, standardized indices are presented in graphical form along with synopses to provide a short, informal cross-basin summary of the status and trends of principal prey fishes. In keeping with this intent, tables, references, and a detailed discussion were omitted.

  14. Diamond vs. square mesh codend in a multi-species trawl fishery of the western Mediterranean: effects on catch composition, yield, size selectivity and discards

    OpenAIRE

    Ordines, F. (Francesc); Massutí, E. (Enric); Guijarro, B. (Beatriz); Mas, R. (Ramon)

    2006-01-01

    Selectivity studies usually describe the effects on target species, whereas information on by-catch and discards is scarce. Nevertheless, large quantities of undersized individuals and invertebrates are discarded in the Mediterranean multi-species bottom trawl fishery. The present work analyses the data from two surveys carried out on the shallow and deep continental shelf (50–78 m, and 147–189 m, respectively) off the Balearic Islands (western Mediterranean). In these surveys, the traditiona...

  15. Baseline study of the distribution of marine debris on soft-bottom habitats associated with trawling grounds in the northern Mediterranean

    Directory of Open Access Journals (Sweden)

    Pilar Sánchez

    2013-06-01

    Full Text Available The present study aims to analyse the local and regional variability in the density and typology of marine debris on fishing grounds on the northern Mediterranean continental shelf, and to test relationships between marine litter and trawl fishing activity. Moreover, the colonization of plastics was examined in order to study the importance of plastics as a source of impact on marine communities and their further environmental implications. This study surveyed 11 sites, associated with trawling grounds and subjected to different levels of fishing intensity, located in four areas of the Mediterranean: one in Italy, the Central Tyrrhenian coast, one in Greece, the eastern Ionian coast, and two in Spain, the Murcian and Catalan coasts. Samples were collected during an oceanographic cruise undertaken from the 21 May to the 24 June 2009. Results showed geographical variation in the density of marine debris which ranged from 0 to 405 pieces per hectare in the surveyed areas, plastics being the dominant components. Variability within sites was higher than between areas, indicating small-scale patchiness in the distribution of the debris over the seafloor. Though the study areas were within trawling grounds, the density of debris was not significantly correlated with fishing effort. More than 30% of plastics were between 10 and 20 cm width/length, and more than 40% of the plastics were colonized by a biofilm of microorganisms, suggesting indirect effects on benthic communities.

  16. Testing Nordmøre grids on the target and by-catch species of the commercial bottom trawl fishery in the Gulf of Cadiz

    Directory of Open Access Journals (Sweden)

    Mariángeles Gamaza

    2015-12-01

    Full Text Available Sorting grids have been tested worldwide in trawl fisheries. Here we report upon the first trials performed using Nordmøre sorting grids with four different bar spacings in the trawl fisheries of the Gulf of Cadiz targeting crustaceans as the main resource. A total of 288 valid hauls and 67 commercial species were caught. Escapement and escape size selectivity were evaluated for the most important target and by-catch species. A decrease in the percentage of biomass escape was recorded with increasing grid spacing for the two target species, deep-water rose shrimp (Parapenaeus longirostris and Norway lobster (Nephrops norvegicus, from 24% to 8% for the former and from 86 to 9% for the latter, with a 15-mm and 30-mm grid respectively. In general, high escape rates were found for most finfish and cephalopods. For hake (Merluccius merluccius, as the main by-catch species, the results showed an escape rate decreasing from 96% to 71% as the bar spacing increased. Our findings suggest the 30-mm grid would be effective for the deep-water crustacean trawlers but different mitigation measures will be required for other métiers in the multispecies trawl fishery of the Gulf of Cadiz.

  17. Recovery by the Norway lobster Nephrops norvegicus (L.) from the physiological stresses of trawling: Influence of season and live-storage position

    DEFF Research Database (Denmark)

    Lund, H. S.; Wang, T.; Chang, E. S.

    2009-01-01

    Live Norway lobsters (Nephrops norvegicus L.) were trawled at depths of 30 to 55 m off the coast of Jutland (Denmark) in late winter (March) and in summer (August) in 2006. Water temperatures at the bottom and surface of the sea were 7 °C and 2 °C during the winter, and 12 °C and 21 °C in the sum......Live Norway lobsters (Nephrops norvegicus L.) were trawled at depths of 30 to 55 m off the coast of Jutland (Denmark) in late winter (March) and in summer (August) in 2006. Water temperatures at the bottom and surface of the sea were 7 °C and 2 °C during the winter, and 12 °C and 21 °C...... in the summer, respectively. The recovery of specific physiological and metabolic variables from the intense stresses associated with capture (trawling and air-exposure during sorting) was followed in seawater at 5 °C in winter or 18 °C in summer. Recovery was compared in lobsters held individually in two......-base status. In winter, a potential metabolic lactic acidosis was compensated by a marked respiratory alkalosis, with significantly increased haemolymph pH and decreased CO2 total content and partial pressure. These effects disappeared gradually over 96 h. Summer lobsters showed combined metabolic...

  18. Deepwater Horizon MC252 water column data from the Environmental Response Management Application (ERMA) containing workplan cruise samples, plankton trawl surveys, fish surveys, and related data collected between 2000-06-13 and 2011-10-06 for the DWH response in the Northern Gulf of Mexico (NCEI Accession 0163816)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This Archival Information Package (AIP) contains Environmental Resource Management Application (ERMA) GIS layers that represent trawl locations, Southeast Area...

  19. Emergency venting of pressure vessels

    International Nuclear Information System (INIS)

    Steinkamp, H.

    1995-01-01

    With the numerical codes developed for safety analysis the venting of steam vessel can be simulated. ATHLET especially is able to predict the void fraction depending on the vessel height. Although these codes contain a one-dimensional model they allow the description of complex geometries due to the detailed nodalization of the considered apparatus. In chemical reactors, however, the venting process is not only influenced by the flashing behaviour but additionally by the running chemical reaction in the vessel. Therefore the codes used for modelling have to consider the kinetics of the chemical reaction. Further multi-component systems and dissolving processes have to be regarded. In order to preduct the fluid- and thermodynamic process it could be helpful to use 3-dimensional codes in combination with the one-dimensional codes as used in nuclear industry to get a more detailed describtion of the running processes. (orig./HP)

  20. 33 CFR 90.3 - Pushing vessel and vessel being pushed: Composite unit.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Pushing vessel and vessel being... HOMELAND SECURITY INLAND NAVIGATION RULES INLAND RULES: INTERPRETATIVE RULES § 90.3 Pushing vessel and vessel being pushed: Composite unit. Rule 24(b) of the Inland Rules states that when a pushing vessel and...

  1. 33 CFR 82.3 - Pushing vessel and vessel being pushed: Composite unit.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Pushing vessel and vessel being... HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES 72 COLREGS: INTERPRETATIVE RULES § 82.3 Pushing vessel and vessel being pushed: Composite unit. Rule 24(b) of the 72 COLREGS states that when a pushing vessel and a...

  2. Containment vessel design and practice

    International Nuclear Information System (INIS)

    Bangash, Y.

    1983-01-01

    The state of the art of analysis and design of the concrete containment vessels required for BWR and PWR is reviewed. A step-by-step critical appraisal of the existing work is given. Elastic, inelastic and cracking conditions under extreme loads are fully discussed. Problems associated with these structures are highlighted. A three-dimensional finite element analysis is included to cater for service, overload and dynamic cracking of such structures. Missile impact and seismic effects are included in this work. The second analysis is known as the limit state analysis, which is given to design such vessels for any kind of load. (U.K.)

  3. Vessel dilatation in coronary angiograms

    International Nuclear Information System (INIS)

    Hinterauer, L.; Goebel, N.

    1983-01-01

    Amongst 166 patients with aneurysms, ectasia or megaloarteries shown on coronary angiograms, 86.1% had dilated vessels as part of generalised coronary sclerosis (usually in patients with three-vessel disease). In 9%, dilatation was of iatrogenic origin and in 4.8% it was idiopathic. One patient had Marfan's syndrome. Amongst 9 000 patients, there were eight with megalo-arteries without stenosis; six of these had atypical angina and three suffered an infarct. Patients with definite dilatation of the coronary artery and stagnation of contrast flow required treatment. (orig.) [de

  4. Vessel dilatation in coronary angiograms

    Energy Technology Data Exchange (ETDEWEB)

    Hinterauer, L.; Goebel, N.

    1983-11-01

    Amongst 166 patients with aneurysms, ectasia or megaloarteries shown on coronary angiograms, 86.1% had dilated vessels as part of generalised coronary sclerosis (usually in patients with three-vessel disease). In 9%, dilatation was of iatrogenic origin and in 4.8% it was idiopathic. One patient had Marfan's syndrome. Amongst 9 000 patients, there were eight with megalo-arteries without stenosis; six of these had atypical angina and three suffered an infarct. Patients with definite dilatation of the coronary artery and stagnation of contrast flow required treatment.

  5. PWR reactor pressure vessel failure probabilities

    International Nuclear Information System (INIS)

    Dufresne, J.; Lanore, J.M.; Lucia, A.C.; Elbaz, J.; Brunnhuber, R.

    1980-05-01

    To evaluate the rupture probability of a LWR vessel a probabilistic method using the fracture mechanics under probabilistic form has been proposed previously, but it appears that more accurate evaluation is possible. In consequence a joint collaboration agreement signed in 1976 between CEA, EURATOM, JRC Ispra and FRAMATOME set up and started a research program covering three parts: a computer code development, data acquisition and processing, and a support experimental program which aims at clarifying the most important parameters used in the COVASTOL computer code

  6. Study on mitigation of in-vessel release of fission products in severe accidents of PWR

    International Nuclear Information System (INIS)

    Huang, G.F.; Tong, L.L.; Li, J.X.; Cao, X.W.

    2010-01-01

    Research highlights: → In-vessel release of fission products in severe accidents for 600 MW PWR is analyzed. → Mitigation effect of primary feed-and-bleed on in-vessel release is investigated. → Mitigation effect of secondary feed-and-bleed on in-vessel release is studied. → Mitigation effect of ex-vessel cooling on in-vessel release is evaluated. - Abstract: During the severe accidents in a nuclear power plant, large amounts of fission products release with accident progression, including in-vessel and ex-vessel release. Mitigation of fission products release is demanded for alleviating radiological consequence in severe accidents. Mitigation countermeasures to in-vessel release are studied for Chinese 600 MW pressurized water reactor (PWR), including feed-and-bleed in primary circuit, feed-and-bleed in secondary circuit and ex-vessel cooling. SBO, LOFW, SBLOCA and LBLOCA are selected as typical severe accident sequences. Based on the evaluation of in-vessel release with different startup time of countermeasure, and the coupling relationship between thermohydraulics and in-vessel release of fission products, some results are achieved. Feed-and-bleed in primary circuit is an effective countermeasure to mitigate in-vessel release of fission products, and earlier startup time of countermeasure is more feasible. Feed-and-bleed in secondary circuit is also an effective countermeasure to mitigate in-vessel release for most severe accident sequences that can cease core melt progression, e.g. SBO, LOFW and SBLOCA. Ex-vessel cooling has no mitigation effect on in-vessel release owing to inevitable core melt and relocation.

  7. Grounding Damage to Conventional Vessels

    DEFF Research Database (Denmark)

    Lützen, Marie; Simonsen, Bo Cerup

    2003-01-01

    The present paper is concerned with rational design of conventional vessels with regard to bottom damage generated in grounding accidents. The aim of the work described here is to improve the design basis, primarily through analysis of new statistical data for grounding damage. The current regula...

  8. PLANNING VESSEL BODY SECTION PRODUCTION

    Directory of Open Access Journals (Sweden)

    A. G. Grivachevsky

    2015-01-01

    Full Text Available A problem of planning production of a vessel body section is considered. The problem is reduced to the classic Johnson’s tree-machine flow-shop scheduling problem. A genetic algorithm and computer experiment to compare efficiency of this algorithm and the algorithm of full enumeration are described.

  9. Pressure vessel and method therefor

    Science.gov (United States)

    Saunders, Timothy

    2017-09-05

    A pressure vessel includes a pump having a passage that extends between an inlet and an outlet. A duct at the pump outlet includes at least one dimension that is adjustable to facilitate forming a dynamic seal that limits backflow of gas through the passage.

  10. Commercial Passenger Fishing Vessel Fishery

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the logbook data from U.S.A. Commercial Passenger Fishing Vessels (CPFV) fishing in the U.S.A. EEZ and in waters off of Baja California, from...

  11. Spatial variation of vessel grouping in the xylem of Betula platyphylla Roth.

    Science.gov (United States)

    Zhao, Xiping

    2016-01-01

    Vessel grouping in angiosperms may improve hydraulic integration and increase the spread of cavitations through redundancy pathways. Although disputed, it is increasingly attracting research interest as a potentially significant hydraulic trait. However, the variation of vessel grouping in a tree is poorly understood. I measured the number of solitary and grouped vessels in the xylem of Betula platyphylla Roth. from the pith to the bark along the water flow path. The vessel grouping parameters included the mean number of vessels per vessel group (VG), percentage of solitary vessels (SVP), percentage of radial multiple vessels (MVP), and percentage of cluster vessels (CVP). The effects of cambial age (CA) and flow path-length (PL) on the vessel grouping were analyzed using a linear mixed model.VG and CVP increased nonlinearly, SVP decreased nonlinearly with PL. In trunks and branches, VG and CVP decreased nonlinearly, and SVP increased nonlinearly with CA. In roots, the parameters had no change with CA. MVP was almost constant with PL or CA. The results suggest that vessel grouping has a nonrandom variation pattern, which is affected deeply by cambial age and water flow path.

  12. Concrete containment vessels (CCV) for nuclear power plants, (1)

    International Nuclear Information System (INIS)

    Ibe, Yukimi; Kitajima, Masatake

    1977-01-01

    Containment vessels (CV) and the construction of concrete containment vessels (CCV) for nuclear power plants are described generally, and their use and techniques in foreign countries are illustrated, in connection with the introduction of CCV to Japanese nuclear power plants. The introduction deals with the construction plan of Japanese nuclear power plants, and with the difficulties in the steel CV for large scale construction. The investigations, tests and researches are not yet sufficient. The prompt establishment of safety supported by technical criteria, analytical methods and experiments is desired. The second part deals with the consideration for aseismatic design, construction, function and characteristics of CCV. The classification and currently employed CCV, which is mainly reinforced concrete containment vessels (RCCV), are described, and the typical CCV employed for BWR is illustrated. Further, the typical arrangement of reinforcing steels at the cylindrical portion and the dome portion of RCCV is illustrated. The third part deals with the present state of CCV abroad. A prestressed concrete containment vessel (PCCV) of Turkey Point power plant is illustrated as a typical example of CCV. The tests reported in the international meeting for the design, construction and operation of concrete pressure vessels and concrete containment vessels at York University in England in 1975 are reviewed. Typical examples of the design conditions, the size and form, and the construction procedure for PCCV and RCCV abroad are reviewed. (Iwakiri, K.)

  13. Development of PWR pressure vessel steels

    International Nuclear Information System (INIS)

    Druce, S.; Edwards, B.

    1982-01-01

    Requirements to be met by vessel steels for pressurized water reactors are analyzed. Chemicat composition of low-alloyed steels, mechanical properties of sheets and forgings made of these steels and changes in the composition and properties over the wall thickness of the reactor vessel are presented. Problems of the vessel manufacturing including welding and heat treatment processes of sheets and forgings are considered. Special attention is paid to steel embrittlement during vessel fabrication and operation (radiation embrittlement, thermal embrittlement). The role of non-metal inclusions and their effect on anisotropy of fracture toughness is discussed. Possible developments of vessel steels and procedures for producing reactor vessels are reviewed

  14. Development of PWR pressure vessel steels

    Energy Technology Data Exchange (ETDEWEB)

    Druce, S.; Edwards, B.

    1982-01-01

    Requirements to be met by vessel steels for pressurized water reactors are analyzed. Chemicat composition of low-alloyed steels, mechanical properties of sheets and forgings made of these steels and changes in the composition and properties over the wall thickness of the reactor vessel are presented. Problems of the vessel manufacturing including welding and heat treatment processes of sheets and forgings are considered. Special attention is paid to steel embrittlement during vessel fabrication and operation (radiation embrittlement, thermal embrittlement). The role of non-metal inclusions and their effect on anisotropy of fracture toughness is discussed. Possible developments of vessel steels and procedures for producing reactor vessels are reviewed.

  15. Survival of fish after escape from a 40 mm stretched diamond mesh trawl codend in the Aegean Sea

    Directory of Open Access Journals (Sweden)

    Faik Ozan Düzbastilar

    2010-11-01

    Full Text Available This study aimed to determine the survival rates of three fish species, the brown comber (Serranus hepatus, black goby (Gobius niger and annular seabream (Diplodus annularis, after their escape from a 40 mm stretched diamond mesh polyethylene (PE codend. Experiments were carried out in the eastern Mediterranean in September 2007 using a conventional bottom trawl with 600 meshes around the mouth. A constant 15 min towing duration was used for all hauls. The towing speed varied between 2.0 and 2.5 knots. Codend covers, supported by two hoops, were used to retain escaping fish. At the end of each haul, these covers were detached from the codend, fixed to the sea floor at depths of 19 to 28 m, and then observed by the divers for a period of seven days. On the eighth day, all of the covers were lifted up and the survivors and mortalities were counted and measured. The mean survival percentages of open codend and experimental cages were found to be 97.1% and 98.3% for brown comber, 69.0% and 77.2% for black goby, and 97.5% and 98.6% for annular seabream respectively.

  16. Pressure vessel for nuclear reactor plant consisting of several pre-stressed cast pressure vessels

    International Nuclear Information System (INIS)

    Bodmann, E.

    1984-01-01

    Several cylindrical pressure vessel components made of pressure castings are arranged on a sector of a circle around the cylindrical cast pressure vessel for accommodating the helium cooled HTR. Each component pressure vessel is connected to the reactor vessel by a horizontal gas duct. The contact surfaces between reactor and component pressure vessel are in one plane. In the spaces between the individual component pressure vessels, there are supporting blocks made of cast iron, which are hollow and also have flat surfaces. With the reactor vessel and the component pressure vessels they form a disc-shaped connecting part below and above the gas ducts. (orig./PW)

  17. Elements of thought on corium containment strategy in reactor vessel

    International Nuclear Information System (INIS)

    2015-01-01

    As accidents with core fusion are taken into account for the design of third-generation nuclear reactors, this brief document presents the corium containment strategy for a reactor vessel, its limitations, as well as research programs undertaken by the IRSN in this field. The report describes the controlled management of a severe accident, the major objective being to minimise releases in the environment, that which requires to maintain the reactor containment enclosure tightness. Practical actions are briefly indicated. Key points indicating the feasibility of a strategy of containment in vessel are discussed. The impact of reactor power on the robustness of an approach with containment in vessel is also discussed. An overview of technological evolutions and contributions of researches made by the IRSN is finally proposed

  18. Multilayer Pressure Vessel Materials Testing and Analysis. Phase 1

    Science.gov (United States)

    Cardinal, Joseph W.; Popelar, Carl F.; Page, Richard A.

    2014-01-01

    To provide NASA a comprehensive suite of materials strength, fracture toughness and crack growth rate test results for use in remaining life calculations for aging multilayer pressure vessels, Southwest Research Institute (R) (SwRI) was contracted in two phases to obtain relevant material property data from a representative vessel. This report describes Phase 1 of this effort which includes a preliminary material property assessment as well as a fractographic, fracture mechanics and fatigue crack growth analyses of an induced flaw in the outer shell of a representative multilayer vessel that was subjected to cyclic pressure test. SwRI performed this Phase 1 effort under contract to the Digital Wave Corporation in support of their contract to Jacobs ATOM for the NASA Ames Research Center.

  19. 2013 EPA Vessels General Permit (VGP)

    Data.gov (United States)

    U.S. Environmental Protection Agency — Information for any vessel that submitted a Notice of Intent (NOI), Notice of Termination (NOT), or annual report under EPA's 2013 Vessel General Permit (VGP)....

  20. Cold source vessel development for the advanced neutron source

    Energy Technology Data Exchange (ETDEWEB)

    Williams, P.T.; Lucas, A.T. [Oak Ridge National Lab., TN (United States)

    1995-09-01

    The Advanced Neutron Source (ANS), in its conceptual design phase at Oak Ridge National Laboratory (ORNL), will be a user-oriented neutron research facility that will produce the most intense flux of neutrons in the world. Among its many scientific applications, the productions of cold neutrons is a significant research mission for the ANS. The cold neutrons come from two independent cold sources positioned near the reactor core. Contained by an aluminum alloy vessel, each cold source is a 410 mm diameter sphere of liquid deuterium that functions both as a neutron moderator and a cryogenic coolant. With nuclear heating of the containment vessel and internal baffling, steady-state operation requires close control of the liquid deuterium flow near the vessel`s inner surface. Preliminary thermal-hydraulic analyses supporting the cold source design are being performed with multi-dimensional computational fluid dynamics simulations of the liquid deuterium flow and heat transfer. This paper presents the starting phase of a challenging program and describes the cold source conceptual design, the thermal-hydraulic feasibility studies of the containment vessel, and the future computational and experimental studies that will be used to verify the final design.