WorldWideScience

Sample records for research tool designed

  1. Reflective Drawing as a Tool for Reflection in Design Research

    Science.gov (United States)

    Calvo, Mirian

    2017-01-01

    This article explores the role of drawing as a tool for reflection. It reports on a PhD research project that aims to identify and analyse the value that co-design processes can bring to participants and their communities. The research is associated with Leapfrog, a three-year project funded by the UK Arts and Humanities Research Council (AHRC).…

  2. Software Tools for Battery Design | Transportation Research | NREL

    Science.gov (United States)

    Software Tools for Battery Design Software Tools for Battery Design Under the Computer-Aided Engineering for Electric Drive Vehicle Batteries (CAEBAT) project, NREL has developed software tools to help using CAEBAT software tools. Knowledge of the interplay of multi-physics at varied scales is imperative

  3. Design tools

    Science.gov (United States)

    Anton TenWolde; Mark T. Bomberg

    2009-01-01

    Overall, despite the lack of exact input data, the use of design tools, including models, is much superior to the simple following of rules of thumbs, and a moisture analysis should be standard procedure for any building envelope design. Exceptions can only be made for buildings in the same climate, similar occupancy, and similar envelope construction. This chapter...

  4. Impact of design research on industrial practice tools, technology, and training

    CERN Document Server

    Lindemann, Udo

    2016-01-01

    Showcasing exemplars of how various aspects of design research were successfully transitioned into and influenced, design practice, this book features chapters written by eminent international researchers and practitioners from industry on the Impact of Design Research on Industrial Practice. Chapters written by internationally acclaimed researchers of design analyse the findings (guidelines, methods and tools), technologies/products and educational approaches that have been transferred as tools, technologies and people to transform industrial practice of engineering design, whilst the chapters that are written by industrial practitioners describe their experience of how various tools, technologies and training impacted design practice. The main benefit of this book, for educators, researchers and practitioners in (engineering) design, will be access to a comprehensive coverage of case studies of successful transfer of outcomes of design research into practice; as well as guidelines and platforms for successf...

  5. Design research in statistics education : on symbolizing and computer tools

    NARCIS (Netherlands)

    Bakker, A.

    2004-01-01

    The present knowledge society requires statistical literacy-the ability to interpret, critically evaluate, and communicate about statistical information and messages (Gal, 2002). However, research shows that students generally do not gain satisfactory statistical understanding. The research

  6. Research on Key Technologies of Unit-Based CNC Machine Tool Assembly Design

    OpenAIRE

    Zhongqi Sheng; Lei Zhang; Hualong Xie; Changchun Liu

    2014-01-01

    Assembly is the part that produces the maximum workload and consumed time during product design and manufacturing process. CNC machine tool is the key basic equipment in manufacturing industry and research on assembly design technologies of CNC machine tool has theoretical significance and practical value. This study established a simplified ASRG for CNC machine tool. The connection between parts, semantic information of transmission, and geometric constraint information were quantified to as...

  7. Assembly tool design

    International Nuclear Information System (INIS)

    Kanamori, Naokazu; Nakahira, Masataka; Ohkawa, Yoshinao; Tada, Eisuke; Seki, Masahiro

    1996-06-01

    The reactor core of the International Thermonuclear Experimental Reactor (ITER) is assembled with a number of large and asymmetric components within a tight tolerance in order to assure the structural integrity for various loads and to provide the tritium confinement. In addition, the assembly procedure should be compatible with remote operation since the core structures will be activated by 14-MeV neutrons once it starts operation and thus personal access will be prohibited. Accordingly, the assembly procedure and tool design are quite essential and should be designed from the beginning to facilitate remote operation. According to the ITER Design Task Agreement, the Japan Atomic Energy Research Institute (JAERI) has performed design study to develop the assembly procedures and associated tool design for the ITER tokamak assembly. This report describes outlines of the assembly tools and the remaining issues obtained in this design study. (author)

  8. NASA System-Level Design, Analysis and Simulation Tools Research on NextGen

    Science.gov (United States)

    Bardina, Jorge

    2011-01-01

    A review of the research accomplished in 2009 in the System-Level Design, Analysis and Simulation Tools (SLDAST) of the NASA's Airspace Systems Program is presented. This research thrust focuses on the integrated system-level assessment of component level innovations, concepts and technologies of the Next Generation Air Traffic System (NextGen) under research in the ASP program to enable the development of revolutionary improvements and modernization of the National Airspace System. The review includes the accomplishments on baseline research and the advancements on design studies and system-level assessment, including the cluster analysis as an annualization standard of the air traffic in the U.S. National Airspace, and the ACES-Air MIDAS integration for human-in-the-loop analyzes within the NAS air traffic simulation.

  9. New Conceptual Design Tools

    DEFF Research Database (Denmark)

    Pugnale, Alberto; Holst, Malene Kirstine; Kirkegaard, Poul Henning

    2010-01-01

    hand, the main software houses are trying to introduce powerful and effective user-friendly applications in the world of building designers, that are more and more able to fit their specific requirements; on the other hand, some groups of expert users with a basic programming knowledge seem to deal......This paper aims to discuss recent approaches in using more and more frequently computer tools as supports for the conceptual design phase of the architectural project. The present state-of-the-art about software as conceptual design tool could be summarized in two parallel tendencies. On the one...... with the problem of software as conceptual design tool by means of 'scripting', in other words by self-developing codes able to solve specific and well defined design problems. Starting with a brief historical recall and the discussion of relevant researches and practical experiences, this paper investigates...

  10. Design of the GLARE tool. A grease lubrication apparatus for research and education

    International Nuclear Information System (INIS)

    Rawlings, B.

    2012-01-01

    The GLARE: Grease Lubrication Apparatus for Research and Education was designed as a fourth year thesis project with the University of Ontario Institute of Technology (UOIT). The purpose of the apparatus is to train Ontario Power Generation Nuclear (OPGN) staff to properly lubricate bearings with grease and to help detect early equipment failures. Proper re-lubrication is critical to the nuclear industry as equipment may be inaccessible for long periods of time. A secondary purpose for the tool is for UOIT research and undergraduate laboratories.This abstract provides an overview of the project and its application to the nuclear industry. (author)

  11. Research on Key Technologies of Unit-Based CNC Machine Tool Assembly Design

    Directory of Open Access Journals (Sweden)

    Zhongqi Sheng

    2014-01-01

    Full Text Available Assembly is the part that produces the maximum workload and consumed time during product design and manufacturing process. CNC machine tool is the key basic equipment in manufacturing industry and research on assembly design technologies of CNC machine tool has theoretical significance and practical value. This study established a simplified ASRG for CNC machine tool. The connection between parts, semantic information of transmission, and geometric constraint information were quantified to assembly connection strength to depict the assembling difficulty level. The transmissibility based on trust relationship was applied on the assembly connection strength. Assembly unit partition based on assembly connection strength was conducted, and interferential assembly units were identified and revised. The assembly sequence planning and optimization of parts in each assembly unit and between assembly units was conducted using genetic algorithm. With certain type of high speed CNC turning center, as an example, this paper explored into the assembly modeling, assembly unit partition, and assembly sequence planning and optimization and realized the optimized assembly sequence of headstock of CNC machine tool.

  12. Rapidly Re-Configurable Flight Simulator Tools for Crew Vehicle Integration Research and Design

    Science.gov (United States)

    Pritchett, Amy R.

    2002-01-01

    While simulation is a valuable research and design tool, the time and difficulty required to create new simulations (or re-use existing simulations) often limits their application. This report describes the design of the software architecture for the Reconfigurable Flight Simulator (RFS), which provides a robust simulation framework that allows the simulator to fulfill multiple research and development goals. The core of the architecture provides the interface standards for simulation components, registers and initializes components, and handles the communication between simulation components. The simulation components are each a pre-compiled library 'plugin' module. This modularity allows independent development and sharing of individual simulation components. Additional interfaces can be provided through the use of Object Data/Method Extensions (OD/ME). RFS provides a programmable run-time environment for real-time access and manipulation, and has networking capabilities using the High Level Architecture (HLA).

  13. Useful design tools?

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole

    2005-01-01

    vague and contested concept of sustainability into concrete concepts and building projects. It describes a typology of tools: process tools, impact assessment tools, multi-criteria tools and tools for monitoring. It includes a Danish paradigmatic case study of stakeholder participation in the planning...... of a new sustainable settlement. The use of design tools is discussed in relation to innovation and stakeholder participation, and it is stressed that the usefulness of design tools is context dependent....

  14. A Clinical Reasoning Tool for Virtual Patients: Design-Based Research Study.

    Science.gov (United States)

    Hege, Inga; Kononowicz, Andrzej A; Adler, Martin

    2017-11-02

    Clinical reasoning is a fundamental process medical students have to learn during and after medical school. Virtual patients (VP) are a technology-enhanced learning method to teach clinical reasoning. However, VP systems do not exploit their full potential concerning the clinical reasoning process; for example, most systems focus on the outcome and less on the process of clinical reasoning. Keeping our concept grounded in a former qualitative study, we aimed to design and implement a tool to enhance VPs with activities and feedback, which specifically foster the acquisition of clinical reasoning skills. We designed the tool by translating elements of a conceptual clinical reasoning learning framework into software requirements. The resulting clinical reasoning tool enables learners to build their patient's illness script as a concept map when they are working on a VP scenario. The student's map is compared with the experts' reasoning at each stage of the VP, which is technically enabled by using Medical Subject Headings, which is a comprehensive controlled vocabulary published by the US National Library of Medicine. The tool is implemented using Web technologies, has an open architecture that enables its integration into various systems through an open application program interface, and is available under a Massachusetts Institute of Technology license. We conducted usability tests following a think-aloud protocol and a pilot field study with maps created by 64 medical students. The results show that learners interact with the tool but create less nodes and connections in the concept map than an expert. Further research and usability tests are required to analyze the reasons. The presented tool is a versatile, systematically developed software component that specifically supports the clinical reasoning skills acquisition. It can be plugged into VP systems or used as stand-alone software in other teaching scenarios. The modular design allows an extension with new

  15. Research on PCPV for BWR - physical model as design tool - main results

    International Nuclear Information System (INIS)

    Fumagalli, E.; Verdelli, G.

    1975-01-01

    ISMES (Experimental Institute for Models and Structures) is now carrying out a series of tests on physical models as a part of a research programme sponsored by DSR (Studies and Research Direction) of ENEL (Italian State Electricity Board) on behalf of CPN (Nuclear Design and Construction Centre) of ENEL with the aim to experience a 'Thin'-walled PCPV for 'BWR'. The physical model, together with the mathematical model and the rheological model of the materials, is intended as a meaningful design tool. The mathematical model covers the overall structural design phase, (geometries) and the linear behaviour, whereas the physical model, besides of a global information to be compared with the results of the mathematical model, supplies a number of data as the non-linear behaviour up to failure and local conditions (penetration area etc.) are concerned. The aim of the first phase of this research programme is to make a comparison between the calculation and experiment tests as the thicknesses of the wall and the bottom slab are concerned, whereas the second phase of the research deals with the behaviour of the removable lid and its connection with the main structure. To do this, a model in scale 1:10 has been designed which symmetrically reproduces with respect to the equator, the bottom part of the structure. In the bottom slab the penetrations of the prototype design are reproduced, whereas the upper slab is plain. This paper describes the model, and illustrates the main results, underlining the different behaviour of the upper and bottom slabs up to collapse

  16. Designing a tool for service-dominant business strategies using action design research

    NARCIS (Netherlands)

    Lüftenegger, E.R.; Comuzzi, M.; Grefen, P.W.P.J.

    2017-01-01

    Both academic research and industrial practice recognize difficulties in translating the principles of service-dominant (S-D) business logic into actionable insights for practitioners, particularly when considering S-D logic at the strategic level. To address this problem, this paper focuses on the

  17. Learning Design Tools

    NARCIS (Netherlands)

    Griffiths, David; Blat, Josep; Garcia, Rocío; Vogten, Hubert; Kwong, KL

    2005-01-01

    Griffiths, D., Blat, J., Garcia, R., Vogten, H. & Kwong, KL. (2005). Learning Design Tools. In: Koper, R. & Tattersall, C., Learning Design: A Handbook on Modelling and Delivering Networked Education and Training (pp. 109-136). Berlin-Heidelberg: Springer Verlag.

  18. Research Design

    DEFF Research Database (Denmark)

    2019-01-01

    Gunnar Scott Reinbacher (editor) Antology.  Research Design : Validation in Social Sciences. Gunnar Scott Reinbacher: Introduction. Research design and validity. 15p Ole Riis: Creative Research design. 16 p Lennart Nørreklit: Validity in Research Design. 24p Gitte Sommer Harrits: Praxeological...... Scott Reinbacher: Multidisciplinary Research Designs in Problem Based Research. The case of an european project on chronical diseases, the Tandem project (Training Alternmative Networking Skills in Diabetes Management). 15p Niels Nørgaard Kristensen: A qualitative bottom up approach to post modern...... knowledge: An integrated strategy for combining "explaining" and "understanding". 22p Heidi Houlberg Salomonsen & Viola Burau: Comparative research designs. 40p Rasmus Antoft & Heidi Houlberg Salomonsen: Studying organizations by a Pragmatic Research Design: the case of qualitative case study  designs. 31p...

  19. Design mentoring tool.

    Science.gov (United States)

    2011-01-01

    In 2004 a design engineer on-line mentoring tool was developed and implemented The purpose of the tool was to assist senior engineers : mentoring new engineers to the INDOT design process and improve their technical competency. This approach saves se...

  20. Design Research

    DEFF Research Database (Denmark)

    Design Research is a new interdisciplinary research area with a social science orientation at its heart, and this book explores how scientific knowledge can be put into practice in ways that are at once ethical, creative, helpful, and extraordinary in their results. In order to clarify the common...... aspects – in terms of features and approaches – that characterize all strands of research disciplines addressing design, Design Research undertakes an in depth exploration of the social processes involved in doing design, as well as analyses of the contexts for design use. The book further elicits...... ‘synergies from interdisciplinary perspectives’ by discussing and elaborating on differing academic perspectives, theoretical backgrounds, and design concept definitions, and evaluating their unique contribution to a general core of design research. This book is an exciting contribution to this little...

  1. OOTW Force Design Tools

    Energy Technology Data Exchange (ETDEWEB)

    Bell, R.E.; Hartley, D.S.III; Packard, S.L.

    1999-05-01

    This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

  2. The Laboratory Course Assessment Survey: A Tool to Measure Three Dimensions of Research-Course Design

    Science.gov (United States)

    Corwin, Lisa A.; Runyon, Christopher; Robinson, Aspen; Dolan, Erin L.

    2015-01-01

    Course-based undergraduate research experiences (CUREs) are increasingly being offered as scalable ways to involve undergraduates in research. Yet few if any design features that make CUREs effective have been identified. We developed a 17-item survey instrument, the Laboratory Course Assessment Survey (LCAS), that measures students’ perceptions of three design features of biology lab courses: 1) collaboration, 2) discovery and relevance, and 3) iteration. We assessed the psychometric properties of the LCAS using established methods for instrument design and validation. We also assessed the ability of the LCAS to differentiate between CUREs and traditional laboratory courses, and found that the discovery and relevance and iteration scales differentiated between these groups. Our results indicate that the LCAS is suited for characterizing and comparing undergraduate biology lab courses and should be useful for determining the relative importance of the three design features for achieving student outcomes. PMID:26466990

  3. How should we assess knowledge translation in research organizations; designing a knowledge translation self-assessment tool for research institutes (SATORI).

    Science.gov (United States)

    Gholami, Jaleh; Majdzadeh, Reza; Nedjat, Saharnaz; Nedjat, Sima; Maleki, Katayoun; Ashoorkhani, Mahnaz; Yazdizadeh, Bahareh

    2011-02-22

    The knowledge translation self-assessment tool for research institutes (SATORI) was designed to assess the status of knowledge translation in research institutes. The objective was, to identify the weaknesses and strengths of knowledge translation in research centres and faculties associated with Tehran University of Medical Sciences (TUMS). The tool, consisting of 50 statements in four main domains, was used in 20 TUMS-affiliated research centres and departments after its reliability was established. It was completed in a group discussion by the members of the research council, researchers and research users' representatives from each centre and/or department. The mean score obtained in the four domains of 'The question of research', 'Knowledge production', 'Knowledge transfer' and 'Promoting the use of evidence' were 2.26, 2.92, 2 and 1.89 (out of 5) respectively.Nine out of 12 interventional priorities with the lowest quartile score were related to knowledge transfer resources and strategies, whereas eight of them were in the highest quartile and related to 'The question of research' and 'Knowledge production'. The self-assessment tool identifies the gaps in capacity and infrastructure of knowledge translation support within research organizations. Assessment of research institutes using SATORI pointed out that strengthening knowledge translation through provision of financial support for knowledge translation activities, creating supportive and facilitating infrastructures, and facilitating interactions between researchers and target audiences to exchange questions and research findings are among the priorities of research centres and/or departments.

  4. Tools for Virtual Collaboration Designed for High Resolution Hydrologic Research with Continental-Scale Data Support

    Science.gov (United States)

    Duffy, Christopher; Leonard, Lorne; Shi, Yuning; Bhatt, Gopal; Hanson, Paul; Gil, Yolanda; Yu, Xuan

    2015-04-01

    Using a series of recent examples and papers we explore some progress and potential for virtual (cyber-) collaboration inspired by access to high resolution, harmonized public-sector data at continental scales [1]. The first example describes 7 meso-scale catchments in Pennsylvania, USA where the watershed is forced by climate reanalysis and IPCC future climate scenarios (Intergovernmental Panel on Climate Change). We show how existing public-sector data and community models are currently able to resolve fine-scale eco-hydrologic processes regarding wetland response to climate change [2]. The results reveal that regional climate change is only part of the story, with large variations in flood and drought response associated with differences in terrain, physiography, landuse and/or hydrogeology. The importance of community-driven virtual testbeds are demonstrated in the context of Critical Zone Observatories, where earth scientists from around the world are organizing hydro-geophysical data and model results to explore new processes that couple hydrologic models with land-atmosphere interaction, biogeochemical weathering, carbon-nitrogen cycle, landscape evolution and ecosystem services [3][4]. Critical Zone cyber-research demonstrates how data-driven model development requires a flexible computational structure where process modules are relatively easy to incorporate and where new data structures can be implemented [5]. From the perspective of "Big-Data" the paper points out that extrapolating results from virtual observatories to catchments at continental scales, will require centralized or cloud-based cyberinfrastructure as a necessary condition for effectively sharing petabytes of data and model results [6]. Finally we outline how innovative cyber-science is supporting earth-science learning, sharing and exploration through the use of on-line tools where hydrologists and limnologists are sharing data and models for simulating the coupled impacts of catchment

  5. Remediating a design tool

    DEFF Research Database (Denmark)

    Jensen, Mads Møller; Rädle, Roman; Klokmose, Clemens N.

    2018-01-01

    digital sticky notes setup. The paper contributes with a nuanced understanding of what happens when remediating a physical design tool into digital space, by emphasizing focus shifts and breakdowns caused by the technology, but also benefits and promises inherent in the digital media. Despite users......' preference for creating physical notes, handling digital notes on boards was easier and the potential of proper documentation make the digital setup a possible alternative. While the analogy in our remediation supported a transfer of learned handling, the users' experiences across technological setups impact......Sticky notes are ubiquitous in design processes because of their tangibility and ease of use. Yet, they have well-known limitations in professional design processes, as documentation and distribution are cumbersome at best. This paper compares the use of sticky notes in ideation with a remediated...

  6. Community-based participatory research and user-centered design in a diabetes medication information and decision tool.

    Science.gov (United States)

    Henderson, Vida A; Barr, Kathryn L; An, Lawrence C; Guajardo, Claudia; Newhouse, William; Mase, Rebecca; Heisler, Michele

    2013-01-01

    Together, community-based participatory research (CBPR), user-centered design (UCD), and health information technology (HIT) offer promising approaches to improve health disparities in low-resource settings. This article describes the application of CBPR and UCD principles to the development of iDecide/Decido, an interactive, tailored, web-based diabetes medication education and decision support tool delivered by community health workers (CHWs) to African American and Latino participants with diabetes in Southwest and Eastside Detroit. The decision aid is offered in English or Spanish and is delivered on an iPad in participants' homes. The overlapping principles of CBPR and UCD used to develop iDecide/Decido include a user-focused or community approach, equitable academic and community partnership in all study phases, an iterative development process that relies on input from all stakeholders, and a program experience that is specified, adapted, and implemented with the target community. Collaboration between community members, researchers, and developers is especially evident in the program's design concept, animations, pictographs, issue cards, goal setting, tailoring, and additional CHW tools. The principles of CBPR and UCD can be successfully applied in developing health information tools that are easy to use and understand, interactive, and target health disparities.

  7. Assessing the impact of user-centered research on a clinical trial eHealth tool via counterbalanced research design.

    Science.gov (United States)

    Atkinson, Nancy L; Massett, Holly A; Mylks, Christy; McCormack, Lauren A; Kish-Doto, Julia; Hesse, Bradford W; Wang, Min Qi

    2011-01-01

    Informatics applications have the potential to improve participation in clinical trials, but their design must be based on user-centered research. This research used a fully counterbalanced experimental design to investigate the effect of changes made to the original version of a website, http://BreastCancerTrials.org/, and confirm that the revised version addressed and reinforced patients' needs and expectations. Participants included women who had received a breast cancer diagnosis within the last 5 years (N=77). They were randomized into two groups: one group used and reviewed the original version first followed by the redesigned version, and the other group used and reviewed them in reverse order. The study used both quantitative and qualitative measures. During use, participants' click paths and general reactions were observed. After use, participants were asked to answer survey items and open-ended questions to indicate their reactions and which version they preferred and met their needs and expectations better. Overall, the revised version of the site was preferred and perceived to be clearer, easier to navigate, more trustworthy and credible, and more private and safe overall. However, users who viewed the original version last had similar attitudes toward both versions. By applying research findings to the redesign of a website for clinical trial searching, it was possible to re-engineer the interface to better support patients' decisions to participate in clinical trials. The mechanisms of action in this case appeared to revolve around creating an environment that supported a sense of personal control and decisional autonomy.

  8. Tool and Fixture Design

    Energy Technology Data Exchange (ETDEWEB)

    Graham, Mark W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-07-28

    In a manufacturing process, a need is identified and a product is created to fill this need. While design and engineering of the final product is important, the tools and fixtures that aid in the creation of the final product are just as important, if not more so. Power supplies assembled at the TA-55 PF-5 have been designed by an excellent engineering team. The task in PF-5 now is to ensure that all steps of the assembly and manufacturing process can be completed safely, reliably, and in a quality repeatable manner. One of these process steps involves soldering fine wires to an electrical connector. During the process development phase, the method of soldering included placing the power supply in a vice in order to manipulate it into a position conducive to soldering. This method is unacceptable from a reliability, repeatability, and ergonomic standpoint. To combat these issues, a fixture was designed to replace the current method. To do so, a twelve step engineering design process was used to create the fixture that would provide a solution to a multitude of problems, and increase the safety and efficiency of production.

  9. Process Design and Costing of Bioethanol Technology: A Tool for Determining the Status and Direction of Research and Development.

    Science.gov (United States)

    Wooley; Ruth; Glassner; Sheehan

    1999-10-01

    Bioethanol is a fuel-grade ethanol made from trees, grasses, and waste materials. It represents a sustainable substitute for gasoline in today's passenger cars. Modeling and design of processes for making bioethanol are critical tools used in the U.S. Department of Energy's bioethanol research and development program. We use such analysis to guide new directions for research and to help us understand the level at which and the time when bioethanol will achieve commercial success. This paper provides an update on our latest estimates for current and projected costs of bioethanol. These estimates are the result of very sophisticated modeling and costing efforts undertaken in the program over the past few years. Bioethanol could cost anywhere from $1.16 to $1.44 per gallon, depending on the technology and the availability of low cost feedstocks for conversion to ethanol. While this cost range opens the door to fuel blending opportunities, in which ethanol can be used, for example, to improve the octane rating of gasoline, it is not currently competitive with gasoline as a bulk fuel. Research strategies and goals described in this paper have been translated into cost savings for ethanol. Our analysis of these goals shows that the cost of ethanol could drop by 40 cents per gallon over the next ten years by taking advantage of exciting new tools in biotechnology that will improve yield and performance in the conversion process.

  10. EPR design tools. Integrated data processing tools

    International Nuclear Information System (INIS)

    Kern, R.

    1997-01-01

    In all technical areas, planning and design have been supported by electronic data processing for many years. New data processing tools had to be developed for the European Pressurized Water Reactor (EPR). The work to be performed was split between KWU and Framatome and laid down in the Basic Design contract. The entire plant was reduced to a logical data structure; the circuit diagrams and flowsheets of the systems were drafted, the central data pool was established, the outlines of building structures were defined, the layout of plant components was planned, and the electrical systems were documented. Also building construction engineering was supported by data processing. The tasks laid down in the Basic Design were completed as so-called milestones. Additional data processing tools also based on the central data pool are required for the phases following after the Basic Design phase, i.e Basic Design Optimization; Detailed Design; Management; Construction, and Commissioning. (orig.) [de

  11. Research design

    NARCIS (Netherlands)

    Tobi, Hilde; Kampen, Jarl K.

    2018-01-01

    Many of today’s global scientific challenges require the joint involvement of researchers from different disciplinary backgrounds (social sciences, environmental sciences, climatology, medicine, etc.). Such interdisciplinary research teams face many challenges resulting from differences in training

  12. Design mentoring tool : [technical summary].

    Science.gov (United States)

    2011-01-01

    In 2004 a design engineer on-line mentoring tool was developed and implemented The purpose of the tool was to assist senior engineers mentoring new engineers to the INDOT design process and improve their technical competency. This approach saves seni...

  13. Design of tool monitor simulator

    International Nuclear Information System (INIS)

    Yao Yonggang; Deng Changming; Zhang Jia; Meng Dan; Zhang Lu; Wang Zhi'ai; Shen Yang

    2011-01-01

    It is based on tool monitor in Qinshan Nuclear Power Plant for the object of study, and manufacture a tool monitor simulator. The device is designed to automatically emulate-monitor the contamination level of objects for training students. Once if the tool monitor reports the contamination, the students can handle properly. The brief introduction of main function and system design of the simulator are presented in the paper. (authors)

  14. Computational Design Tools for Integrated Design

    DEFF Research Database (Denmark)

    Holst, Malene Kirstine; Kirkegaard, Poul Henning

    2010-01-01

    In an architectural conceptual sketching process, where an architect is working with the initial ideas for a design, the process is characterized by three phases: sketching, evaluation and modification. Basically the architect needs to address three areas in the conceptual sketching phase......: aesthetical, functional and technical requirements. The aim of the present paper is to address the problem of a vague or not existing link between digital conceptual design tools used by architects and designers and engineering analysis and simulation tools. Based on an analysis of the architectural design...... process different digital design methods are related to tasks in an integrated design process....

  15. Adapting the buying funnel model of consumer behavior to the design of an online health research recruitment tool.

    Science.gov (United States)

    Doshi, Aalap; Connally, Lisa; Spiroff, Meghan; Johnson, Anita; Mashour, George A

    2017-08-01

    UMHealthResearch is the University of Michigan's digital health research recruitment platform. It allows health researchers to connect efficiently with potentially eligible volunteers. In 2013, the UMHealthResearch team strategically adapted a consumer behavior model, the buying funnel, to create the Digital Health Research Participation Funnel. The Digital Health Research Participation Funnel was then used to design a more active way for potential participants to volunteer for research studies through UMHealthResearch. In the 5 years before the redesign (2007-2012), an average of 1844 new accounts were created every year, whereas in the completed years after the redesign (2013-2016) the annual average improved to 3906, an increase of 111%. Although a randomized design was not possible in this instance, these preintervention and postintervention data suggest that the focus on user experience is an effective strategy for improving web-based research recruitment platforms.

  16. Maintenance, operation, and research (radiation) zones (MORZ) application model - a design and operation tool for intelligent buildings with application to the advanced neutron source

    International Nuclear Information System (INIS)

    Shapira, H.B.; Brown, R.A.

    1995-01-01

    This paper describes a user-friendly application tool to assist in the design, operation and maintenance of large buildings/facilities charged with complex/extensive/elaborate activities. The model centers around a specially designed, easy-access data base containing essentially all the relevant information about the facility. Our first test case is the Advanced Neutron Source (ANS) research reactor to be constructed as a center for neutron research

  17. Design of parametric software tools

    DEFF Research Database (Denmark)

    Sabra, Jakob Borrits; Mullins, Michael

    2011-01-01

    The studies investigate the field of evidence-based design used in architectural design practice and propose a method using 2D/3D CAD applications to: 1) enhance integration of evidence-based design knowledge in architectural design phases with a focus on lighting and interior design and 2) assess...... fulfilment of evidence-based design criterion regarding light distribution and location in relation to patient safety in architectural health care design proposals. The study uses 2D/3D CAD modelling software Rhinoceros 3D with plug-in Grasshopper to create parametric tool prototypes to exemplify...... the operations and functions of the design method. To evaluate the prototype potentials, surveys with architectural and healthcare design companies are conducted. Evaluation is done by the administration of questionnaires being part of the development of the tools. The results show that architects, designers...

  18. "Research Tools": Tools for supporting research and publications

    OpenAIRE

    Ebrahim, Nader Ale

    2014-01-01

    Research Tools” can be defined as vehicles that broadly facilitate research and related activities. “Research Tools” enable researchers to collect, organize, analyze, visualize and publicized research outputs. Dr. Nader has collected over 700 tools that enable students to follow the correct path in research and to ultimately produce high-quality research outputs with more accuracy and efficiency. It is assembled as an interactive Web-based mind map, titled “Research Tools”, which is updated ...

  19. Design Research between Design and Research

    DEFF Research Database (Denmark)

    Steinø, Nicolai; Markussen, Thomas

    2011-01-01

    The discourse on architecture and design research in Denmark in the past thirty years has been stuck in a unproductive dichotomy between research through design on the one hand and a phantom image of academic and theoretical, word-based research on the other. Advocates of the research through...... design strand have argued, that architecture and design research must follow an architecture and design methodology – designing – and be communicated by means of architecture and design media – images and artefacts. Essentially, this view sees no difference between architecture and design research...... and practice, as expressed in the notion of research as ‘artistic innovation work’. On the other hand, the pressure to expand research in architecture and design has seen a movement towards adopting traditional research paradigms from the technical and social sciences and humanities. For many architects...

  20. Research tools | IDRC - International Development Research Centre

    International Development Research Centre (IDRC) Digital Library (Canada)

    Through training materials and guides, we aim to build skills and knowledge to enhance the quality of development research. We also offer free access to our database of funded research projects, known as IDRIS+, and our digital library. Our research tools include. Guide to research databases at IDRC: How to access and ...

  1. Hybrid Design Tools Intuit Interaction

    NARCIS (Netherlands)

    Wendrich, Robert E.; Kyvsgaard Hansen, P.; Rasmussen, J.; Jorgensen, K.A.; Tollestrup, C.

    2012-01-01

    Non-linear, non-explicit, non-standard thinking and ambiguity in design tools has a great impact on enhancement of creativity during ideation and conceptualization. Tacit-tangible representation based on a mere idiosyncratic and individual approach combined with computational assistance allows the

  2. Design Research as Conceptual Designing

    DEFF Research Database (Denmark)

    Ylirisku, Salu; Jacucci, Giulio; Sellen, Abigail

    2015-01-01

    define conceptual designing as a constructive framing and re-framing activity, which is mediated by and targeted at the creation of new design concepts. Conceptual designing as an approach is valuable for addressing the fuzziness and ambiguity typical of research that explores novel areas with new...... partners, methods and resources. It is by no means a new phenomenon, and the main contribution of the article is the clarification of conceptual designing as a particular approach to designing and researching. The approach embraces openness, resource-construction and collaboration. We conclude...... that conceptual designing can be especially useful in research and design projects that bring different kinds of people, organizations, technologies and domains together into the forming of new well-founded proposals for development. The presentation of conceptual designing in this paper is written...

  3. Computational challenges and human factors influencing the design and use of clinical research participant eligibility pre-screening tools

    Directory of Open Access Journals (Sweden)

    Pressler Taylor R

    2012-05-01

    Full Text Available Abstract Background Clinical trials are the primary mechanism for advancing clinical care and evidenced-based practice, yet challenges with the recruitment of participants for such trials are widely recognized as a major barrier to these types of studies. Data warehouses (DW store large amounts of heterogenous clinical data that can be used to enhance recruitment practices, but multiple challenges exist when using a data warehouse for such activities, due to the manner of collection, management, integration, analysis, and dissemination of the data. A critical step in leveraging the DW for recruitment purposes is being able to match trial eligibility criteria to discrete and semi-structured data types in the data warehouse, though trial eligibility criteria tend to be written without concern for their computability. We present the multi-modal evaluation of a web-based tool that can be used for pre-screening patients for clinical trial eligibility and assess the ability of this tool to be practically used for clinical research pre-screening and recruitment. Methods The study used a validation study, usability testing, and a heuristic evaluation to evaluate and characterize the operational characteristics of the software as well as human factors affecting its use. Results Clinical trials from the Division of Cardiology and the Department of Family Medicine were used for this multi-modal evaluation, which included a validation study, usability study, and a heuristic evaluation. From the results of the validation study, the software demonstrated a positive predictive value (PPV of 54.12% and 0.7%, respectively, and a negative predictive value (NPV of 73.3% and 87.5%, respectively, for two types of clinical trials. Heuristic principles concerning error prevention and documentation were characterized as the major usability issues during the heuristic evaluation. Conclusions This software is intended to provide an initial list of eligible patients to a

  4. Assessing Digital Student Productions, a Design-Based Research Study on the Development of a Criteria-Based Assessment Tool for Students’ Digital Multimodal Productions

    DEFF Research Database (Denmark)

    Hoffmeyer, Mikkeline; Jensen, Jesper Juellund; Olsen, Marie Veisegaard

    2017-01-01

    Digital multimodal production is becoming increasingly important as a 21st century skill and as a learning condition in school (K-12). Moreover, there is a growing attention to the significance of criteria-based assessment for learning. Nevertheless, assessment of students’ digital multimodal...... productions is often vague or lacking. Therefore, the research project aims at developing a tool to support assessment of student’s digital multimodal productions through a design-based research method. This paper presents a proposal for issues to be considered through a prototyping phase, based on interviews...

  5. Integrated Design Tools for Embedded Control Systems

    OpenAIRE

    Jovanovic, D.S.; Hilderink, G.H.; Broenink, Johannes F.; Karelse, F.

    2001-01-01

    Currently, computer-based control systems are still being implemented using the same techniques as 10 years ago. The purpose of this project is the development of a design framework, consisting of tools and libraries, which allows the designer to build high reliable heterogeneous real-time embedded systems in a very short time at a fraction of the present day costs. The ultimate focus of current research is on transformation control laws to efficient concurrent algorithms, with concerns about...

  6. Empirical research through design

    NARCIS (Netherlands)

    Keyson, D.V.; Bruns, M.

    2009-01-01

    This paper describes the empirical research through design method (ERDM), which differs from current approaches to research through design by enforcing the need for the designer, after a series of pilot prototype based studies, to a-priori develop a number of testable interaction design hypothesis

  7. Managing research and surveillance projects in real-time with a novel open-source eManagement tool designed for under-resourced countries.

    Science.gov (United States)

    Steiner, Andreas; Hella, Jerry; Grüninger, Servan; Mhalu, Grace; Mhimbira, Francis; Cercamondi, Colin I; Doulla, Basra; Maire, Nicolas; Fenner, Lukas

    2016-09-01

    A software tool is developed to facilitate data entry and to monitor research projects in under-resourced countries in real-time. The eManagement tool "odk_planner" is written in the scripting languages PHP and Python. The odk_planner is lightweight and uses minimal internet resources. It was designed to be used with the open source software Open Data Kit (ODK). The users can easily configure odk_planner to meet their needs, and the online interface displays data collected from ODK forms in a graphically informative way. The odk_planner also allows users to upload pictures and laboratory results and sends text messages automatically. User-defined access rights protect data and privacy. We present examples from four field applications in Tanzania successfully using the eManagement tool: 1) clinical trial; 2) longitudinal Tuberculosis (TB) Cohort Study with a complex visit schedule, where it was used to graphically display missing case report forms, upload digitalized X-rays, and send text message reminders to patients; 3) intervention study to improve TB case detection, carried out at pharmacies: a tablet-based electronic referral system monitored referred patients, and sent automated messages to remind pharmacy clients to visit a TB Clinic; and 4) TB retreatment case monitoring designed to improve drug resistance surveillance: clinicians at four public TB clinics and lab technicians at the TB reference laboratory used a smartphone-based application that tracked sputum samples, and collected clinical and laboratory data. The user friendly, open source odk_planner is a simple, but multi-functional, Web-based eManagement tool with add-ons that helps researchers conduct studies in under-resourced countries. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  8. Towards programmatic design research

    Directory of Open Access Journals (Sweden)

    Jonas Löwgren

    2013-12-01

    Full Text Available The notion of design research entails research where design practice forms part of the knowledge production. Based on our characterization of the nature of design, we propose to conceptualize this kind of research as programmatic design research. Two ongoing PhD projects in interaction design are presented as examples of programmatic research processes, highlighting issues to do with the virtues and qualities of the processes, the interplay of optics and engagements in a hermeneutical dynamic, and the production of takeaways for the academic community.

  9. Matlab as a robust control design tool

    Science.gov (United States)

    Gregory, Irene M.

    1994-01-01

    This presentation introduces Matlab as a tool used in flight control research. The example used to illustrate some of the capabilities of this software is a robust controller designed for a single stage to orbit air breathing vehicles's ascent to orbit. The global requirements of the controller are to stabilize the vehicle and follow a trajectory in the presence of atmospheric disturbances and strong dynamic coupling between airframe and propulsion.

  10. A Meta-Analysis Method to Advance Design of Technology-Based Learning Tool: Combining Qualitative and Quantitative Research to Understand Learning in Relation to Different Technology Features

    Science.gov (United States)

    Zhang, Lin

    2014-01-01

    Educators design and create various technology tools to scaffold students' learning. As more and more technology designs are incorporated into learning, growing attention has been paid to the study of technology-based learning tool. This paper discusses the emerging issues, such as how can learning effectiveness be understood in relation to…

  11. Altitude Compensating Nozzle Design Tool, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Launch vehicle subsystem preliminary design tools that are fast, accurate, and seamlessly integrated into an electronic design and optimization environment have...

  12. Teaching engineering design research

    DEFF Research Database (Denmark)

    Blessing, Lucienne; Andreasen, Mogens Myrup

    2005-01-01

    The importance og engineering design as an industrial activity, and the increasingly complex and dynamic context in which it takes place, has led to the wish to improve the effectiveness and efficiency of engineering design in practice as well as in education. Although attempts have been made...... to improve design for centuries, it was not until well in the second half of the 20th century that engineering design became a research topic (see pahl and Beitz (1996), Heymann (2004) for historical overviews). Engineering research, such as research into thermodynamics, mechanics and materials, has a much...... by PhD students. This has created the demand for a clear, efficient way of learning the crafmanship of doing design research, a demand which is in strong contrast to the state of design research in general. This article reflects the authors' efforts in running a summer school om engineering design...

  13. Participatory design based research

    DEFF Research Database (Denmark)

    Dau, Susanne; Bach Jensen, Louise; Falk, Lars

    This poster reveal how participatory design based research by the use of a CoED inspired creative process can be used for designing solutions to problems regarding students study activities outside campus.......This poster reveal how participatory design based research by the use of a CoED inspired creative process can be used for designing solutions to problems regarding students study activities outside campus....

  14. Bridging the Gap between User Experience Research and Design in Industry: An Analysis of Two Common Communication Tools--Personas and Scenarios

    Science.gov (United States)

    Putnam, Cynthia

    2010-01-01

    User experience (UX) research in the design of technology products utilizes human-centered design (HCD) methods to summarize and explain pertinent information about end users to designers. However, UX researchers cannot effectively communicate the needs and goals of users if designers do not find UX research (a) easy to integrate into design…

  15. Some tooling for manufacturing research reactor fuel plates

    International Nuclear Information System (INIS)

    Knight, R.W.

    1999-01-01

    This paper will discuss some of the tooling necessary to manufacture aluminum-based research reactor fuel plates. Most of this tooling is intended for use in a high-production facility. Some of the tools shown have manufactured more than 150,000 pieces. The only maintenance has been sharpening. With careful design, tools can be made to accommodate the manufacture of several different fuel elements, thus, reducing tooling costs and maintaining tools that the operators are trained to use. An important feature is to design the tools using materials with good lasting quality. Good tools can increase return on investment. (author)

  16. Some Tooling for Manufacturing Research Reactor Fuel Plates

    International Nuclear Information System (INIS)

    Knight, R.W.

    1999-01-01

    This paper will discuss some of the tooling necessary to manufacture aluminum-based research reactor fuel plates. Most of this tooling is intended for use in a high-production facility. Some of the tools shown have manufactured more than 150,000 pieces. The only maintenance has been sharpening. With careful design, tools can be made to accommodate the manufacture of several different fuel elements, thus, reducing tooling costs and maintaining tools that the operators are trained to use. An important feature is to design the tools using materials with good lasting quality. Good tools can increase return on investment

  17. Reflecting Contemporary Design Research

    DEFF Research Database (Denmark)

    Engholm, Ida

    2017-01-01

    In recent years, design research has been the object of growing attention in universities and academies throughout the world. The present paper addresses the heterogeneous character of design research and the current need for reflection on the various approaches and interests. For this purpose......, the paper follows two steps. First, it proposes a categorization of the field in the form of a position model. The paper’s underlying assumption is that design research as a discipline exists in many different forms that cannot necessarily be brought together under one common academic research tradition......; instead it is necessary to attempt to define the field in order to initiate discussions about what constitutes the various research bases for design. Second, the paper discusses the implication for future design research when it is an interdisciplinary field that involves many disciplines, mindsets...

  18. Design (research) practice

    DEFF Research Database (Denmark)

    Binder, Thomas; Brandt, Eva

    2017-01-01

    possibilities through experimentation (Brandt and Binder 2007). Likewise in relation to design research we have argued that “the possible is always contingent and though research may convincingly provide arguments for certain possibilities both search and arguments have to be guided by programs that set...... substantiate or challenge this view and the dialectic between program and probing is in our view central to any design practice” (Binder and Redström 2006: 4). Our suggestion is to see design research practices as fundamentally homologous to any other design practices both in terms of the way they are driven...

  19. Hybrid design tools for conceptual design and design engineering processes: bridging the design gap: towards an intuitive design tool

    NARCIS (Netherlands)

    Wendrich, Robert E.

    2016-01-01

    Hybrid Design Tools; Representation; Computational Synthesis. Non-linear, non-explicit, non-standard thinking and ambiguity in design tools has a great impact on enhancement of creativity during ideation and conceptualization. Tacit-tangible representation based on a mere idiosyncratic and

  20. Design of the ITER Tokamak Assembly Tools

    International Nuclear Information System (INIS)

    Park, Hyunki; Her, Namil; Kim, Byungchul; Im, Kihak; Jung, Kijung; Lee, Jaehyuk; Im, Kisuk

    2006-01-01

    ITER (International Thermonuclear Experimental Reactor) Procurement allocation among the seven Parties, EU, JA, CN, IN , KO, RF and US had been decided in Dec. 2005. ITER Tokamak assembly tools is one of the nine components allocated to Korea for the construction of the ITER. Assembly tools except measurement and common tools are supplied to assemble the ITER Tokamak and classified into 9 groups according to components to be assembled. Among the 9 groups of assembly tools, large-sized Sector Sub-assembly Tools and Sector Assembly Tools are used at the first stage of ITER Tokamak construction and need to be designed faster than seven other assembly tools. ITER IT (International Team) proposed Korea to accomplish ITA (ITER Transitional Arrangements) Task on detailed design, manufacturing feasibility and contract specification of specific, large sized tools such as Upending Tool, Lifting Tool, Sector Sub-assembly Tool and Sector Assembly Tool in Oct. 2004. Based on the concept design by ITER IT, Korea carried out ITA Task on detailed design of large-sized and specific Sector Sub-assembly and Sector Assembly Tools until Mar. 2006. The Sector Sub-assembly Tools mainly consist of the Upending, Lifting, Vacuum Vessel Support and Bracing, and Sector Sub-assembly Tool, among which the design of three tools are herein. The Sector Assembly Tools mainly consist of the Toroidal Field (TF) Gravity Support Assembly, Sector In-pit Assembly, TF Coil Assembly, Vacuum Vessel (VV) Welding and Vacuum Vessel Thermal Shield (TS) Assembly Tool, among which the design of Sector In-pit Assembly Tool is described herein

  1. Design Tools for Integrated Asynchronous Electronic Circuits

    National Research Council Canada - National Science Library

    Martin, Alain

    2003-01-01

    ..., simulation, verification, at the logical and physical levels. Situs has developed a business model for the commercialization of the CAD tools, and has designed the prototype of the tool suite based on this business model and the Caltech approach...

  2. Integrated Radiation Analysis and Design Tools

    Data.gov (United States)

    National Aeronautics and Space Administration — The Integrated Radiation Analysis and Design Tools (IRADT) Project develops and maintains an integrated tool set that collects the current best practices, databases,...

  3. Design for Motivation: Evaluation of a Design Tool

    OpenAIRE

    Chasanidou, Dimitra

    2018-01-01

    Design for motivation constitutes a design practice that focuses on the activation of human motives to perform an action. There is an increasing need to design motivational and engaging mechanisms for voluntary systems, such as innovation platforms, where user participation is a key target. When designing for motivation, a challenge of the early design phases is the selection of appropriate design tool and strategy. The current work presents a design tool, namely DEMO (DEsign for MOtivation),...

  4. Empathic design: Research strategies

    Directory of Open Access Journals (Sweden)

    Joyce Thomas

    2013-01-01

    Full Text Available This paper explores the role of empathy within new product development from the perspective of human-centred design. The authors have developed a range of empathic design tools and strategies that help to identify authentic human needs.For products and services to be effective, they need to satisfy both functional and emotional needs of individuals. In addition, the individual user needs to feel that the product and/or service has been designed ‘just for them’, otherwise they may misuse, underuse or abandon the product/service. This becomes critical with a product such as a Zimmer frame (walker, when it fails to resonate with the patient due to any stigma the patient may perceive, and thus remains unused.When training young designers to consider the wider community (people unlike themselves during the design process, it has proven extremely valuable to take them outside their comfort zones, by seeking to develop empathy with the end user for whom they are designing. Empathic modelling offers designers the opportunity to develop greater insight and understanding, in order to support more effective design outcomes. Sensitising designers to the different ways that individuals complete daily tasks has helped to diminish the gap between themselves and others (e.g. people with disabilities.The authors intend for this paper to resonate with health care providers. Human-centred design can help to refocus the designer, by placing the individual end user’s needs at the heart of their decision-making.

  5. Empathic design: Research strategies.

    Science.gov (United States)

    Thomas, Joyce; McDonagh, Deana

    2013-01-01

    This paper explores the role of empathy within new product development from the perspective of human-centred design. The authors have developed a range of empathic design tools and strategies that help to identify authentic human needs.For products and services to be effective, they need to satisfy both functional and emotional needs of individuals. In addition, the individual user needs to feel that the product and/or service has been designed 'just for them', otherwise they may misuse, underuse or abandon the product/service. This becomes critical with a product such as a Zimmer frame (walker), when it fails to resonate with the patient due to any stigma the patient may perceive, and thus remains unused.When training young designers to consider the wider community (people unlike themselves) during the design process, it has proven extremely valuable to take them outside their comfort zones, by seeking to develop empathy with the end user for whom they are designing. Empathic modelling offers designers the opportunity to develop greater insight and understanding, in order to support more effective design outcomes. Sensitising designers to the different ways that individuals complete daily tasks has helped to diminish the gap between themselves and others (e.g. people with disabilities).The authors intend for this paper to resonate with health care providers. Human-centred design can help to refocus the designer, by placing the individual end user's needs at the heart of their decision-making.

  6. Production engineering jig and tool design

    CERN Document Server

    Jones, E J H

    1972-01-01

    Production Engineering: Jig and Tool Design focuses on jig and tool design as part of production engineering and covers topics ranging from inspection and gauging to multiple and consecutive tooling, tool calculation and development of form tools, deep-hole boring, and grinding-wheel form-crushing. Air and oil operated fixtures, negative rake machining, and the economics of jig and fixture practice are also discussed. This text is comprised of 22 chapters; the first of which provides an overview of the function and organization of the jig and tool department. Attention then turns to the subjec

  7. Design-Based Research

    DEFF Research Database (Denmark)

    Gynther, Karsten; Christensen, Ove; Petersen, Trine Brun

    2012-01-01

    I denne artikel introduceres Design Based Research for første gang på dansk i et videnskabeligt tidsskrift. Artiklen præsenterer de grundlæggende antagelser, som ligger til grund for Design Based Research-traditionen, og artiklen diskuterer de principper, som ligger til grund for gennemførelse af...... et DBR-forskningsprojekt. Med udgangspunkt i forsknings- og udviklingsprojektet ELYK: E-læring, Yderområder og Klyngedannelse, præsenteres den innovationsmodel, som projektet har udviklet med udgangspunkt i Design Based Research traditionen. ELYKs DBR innovationsmodel har vist sig effektiv i forhold...

  8. Impact assessment as a design tool

    DEFF Research Database (Denmark)

    Lyhne, Ivar

    Research and development (R&D) programmes constitute a pivotal arena for shaping technologies of the future. In order to make qualified decisions, R&D programmes ought to be subject to impact assessment (IA). It seems, however, that only a few countries have developed a systematic practice. One r...... reason for the limited practice might be that IA of R&D policy is said to be particularly difficult. This paper reports on experiences from a voluntary IA application in Danish with point of departure in the question: How does IA work as a design tool in terms of R&D programmes?...

  9. Experimental Design Research

    DEFF Research Database (Denmark)

    This book presents a new, multidisciplinary perspective on and paradigm for integrative experimental design research. It addresses various perspectives on methods, analysis and overall research approach, and how they can be synthesized to advance understanding of design. It explores the foundations...... of experimental approaches and their utility in this domain, and brings together analytical approaches to promote an integrated understanding. The book also investigates where these approaches lead to and how they link design research more fully with other disciplines (e.g. psychology, cognition, sociology......, computer science, management). Above all, the book emphasizes the integrative nature of design research in terms of the methods, theories, and units of study—from the individual to the organizational level. Although this approach offers many advantages, it has inherently led to a situation in current...

  10. Developing a Parametric Urban Design Tool

    DEFF Research Database (Denmark)

    Steinø, Nicolai; Obeling, Esben

    2014-01-01

    Parametric urban design is a potentially powerful tool for collaborative urban design processes. Rather than making one- off designs which need to be redesigned from the ground up in case of changes, parametric design tools make it possible keep the design open while at the same time allowing...... for a level of detailing which is high enough to facilitate an understan- ding of the generic qualities of proposed designs. Starting from a brief overview of parametric design, this paper presents initial findings from the development of a parametric urban design tool with regard to developing a structural...... logic which is flexible and expandable. It then moves on to outline and discuss further development work. Finally, it offers a brief reflection on the potentials and shortcomings of the software – CityEngine – which is used for developing the parametric urban design tool....

  11. Against (Design Research

    Directory of Open Access Journals (Sweden)

    Ferdinand Indrajaya

    2011-10-01

    Full Text Available The content of this article is an attempt to show that the word research in traditional sense (within the Cartesian scheme is hostile to design activity. It will reduce the process of design into a merely fix mechanical process, burying the aspect of imagination, creativity, and more importantly proposing in it that is a crucial aspect to design. This imposition might indiscipline (in a formal academic sense design as a discipline in human sciences. In order to achieve this, the article is divided in three sections. The first section will discuss what scientific research is and what traditionally presupposed in it: objective, neutral, and a-historical; simply the disinterestedness of research. As for the second, epistemological concerns on traditional scientific research from two philosophers of science will be discussed: Thomas S. Kuhn and Paul K. Feyerabend. As for the third, the closing section, an attempt to delineate design and what designers do in comparison to scientists’ will be discussed. It is how design and designers are different in their manners with traditional science and scientist. 

  12. CRITON : A Hypermedia Design Tool

    NARCIS (Netherlands)

    Avgeriou, Paris; Retalis, Symeon

    2005-01-01

    The WWW has turned into a development and run-time environment for large-scale and complex applications. Such sophisticated applications are being deployed in increasing numbers without having been developed according to appropriate methodologies, tools and quality standards. The reason is not only

  13. Conducting Educational Design Research

    Science.gov (United States)

    McKenney, Susan; Reeves, Thomas

    2012-01-01

    Educational design research blends scientific investigation with systematic development and implementation of solutions to educational problems. Empirical investigation is conducted in real learning settings--not laboratories--to craft usable and effective solutions. At the same time, the research is carefully structured to produce theoretical…

  14. Design Science Research

    DEFF Research Database (Denmark)

    Pries-Heje, Jan; Venable, John; Baskerville, Richard L.

    2017-01-01

    This workshop is an applied tutorial, aimed at novice and experienced researchers who wish to learn more about Design Science Research (DSR) and/or to develop and progress their own DSR work. During the workshop, attendees will be introduced to various DSR concepts and current trends, to create...

  15. SASD-tools for program design

    International Nuclear Information System (INIS)

    Gather, K.S.

    1989-01-01

    An overview of Structured Analysis Structured Design (SASD) methodology is given. Some emphasis is put on the time needed to start in a HEP environment with software design methodologies, and on the motivation for SASD. The need for tools is indicated, and examples of their usefulness in analysis and design steps are discussed. Limitations of certain design methods are indicated and additional tools are briefly discussed. Criteria for the selection of tools to be used in large systems design are discussed, and some attention is given to implications for management structures. (orig.)

  16. Design of the ITER tokamak assembly tools

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hyunki [National Fusion Research Institute, 52 Eoeun-Dong, Yuseong-Gu, Daejon 305-333 (Korea, Republic of)], E-mail: hkpark@nfri.re.kr; Lee, Jaehyuk; Kim, Taehyung [SFA Engineering Corp., 42-7 Palyong-dong, Changwon-si, Gyeongsangnam-do 641-847 (Korea, Republic of); Song, Yunju [National Fusion Research Institute, 52 Eoeun-Dong, Yuseong-Gu, Daejon 305-333 (Korea, Republic of); Im, Kihak [ITER Organization, CEA Cadarasche, 13108 Saint Paul-lez-Durance (France); Kim, Byungchul; Lee, Hyeongon; Jung, Ki-Jung [National Fusion Research Institute, 52 Eoeun-Dong, Yuseong-Gu, Daejon 305-333 (Korea, Republic of)

    2008-12-15

    ITER tokamak assembly is mainly composed of lower cryostat activities, sector sub-assembly, sector assembly, in-vessel activities and ex-vessel activities. The main tools for sector sub-assembly procedures consists of upending tool, sector lifting tool, vacuum vessel support and bracing tool and sector sub-assembly tool. Conceptual design of assembly tools for sector sub-assembly procedures is described herein. The basic structure for upending tool has been developed under the assumption that upending is performed with crane which will be installed in Tokamak building. Sector lifting tool is designed to adjust the position of a sector to minimize the difference between the center of the tokamak building crane and the center of gravity of the sector. Sector sub-assembly tool is composed of special frame for the fine adjustment of position control with 6 degrees of freedom. The design of VV support and bracing tool for four kinds of VV 40 deg. sectors has been developed. Also, structural analysis for upending tool, sector sub-assembly tool has been studied using ANSYS for the situation of an applied load with the same dead weight multiplied by 3/4. The results of structural analyses for these tools were below the allowable values.

  17. Mutated genes as research tool

    International Nuclear Information System (INIS)

    1981-01-01

    Green plants are the ultimate source of all resources required for man's life, his food, his clothes, and almost all his energy requirements. Primitive prehistoric man could live from the abundance of nature surrounding him. Man today, dominating nature in terms of numbers and exploiting its limited resources, cannot exist without employing his intelligence to direct natural evolution. Plant sciences, therefore, are not a matter of curiosity but an essential requirement. From such considerations, the IAEA and FAO jointly organized a symposium to assess the value of mutation research for various kinds of plant science, which directly or indirectly might contribute to sustaining and improving crop production. The benefit through developing better cultivars that plant breeders can derive from using the additional genetic resources resulting from mutation induction has been assessed before at other FAO/IAEA meetings (Rome 1964, Pullman 1969, Ban 1974, Ibadan 1978) and is also monitored in the Mutation Breeding Newsletter, published by IAEA twice a year. Several hundred plant cultivars which carry economically important characters because their genes have been altered by ionizing radiation or other mutagens, are grown by farmers and horticulturists in many parts of the world. But the benefit derived from such mutant varieties is without any doubt surpassed by the contribution which mutation research has made towards the advancement of genetics. For this reason, a major part of the papers and discussions at the symposium dealt with the role induced-mutation research played in providing insight into gene action and gene interaction, the organization of genes in plant chromosomes in view of homology and homoeology, the evolutionary role of gene duplication and polyploidy, the relevance of gene blocks, the possibilities for chromosome engineering, the functioning of cytroplasmic inheritance and the genetic dynamics of populations. In discussing the evolutionary role of

  18. Design tools and materials in creative work

    DEFF Research Database (Denmark)

    Hansen, Nicolai Brodersen; Dalsgaard, Peter; Halskov, Kim

    2017-01-01

    -oriented perspectives, we wish to examine the potentials and limitations in current uses of design tools and materials, and discuss and explore when and how we can introduce ones. Participation in the workshop requires participants to document and analyse central themes in a case, and the resulting material will serve......This workshop aims to examine and discuss the role and nature of design tools and materials in creative work, and to explore how novel tools can meaningfully combine existing and novel tools to support and augment creative work. By exploring and combining methodological, theoretical, and design...

  19. Research by Design: Design-Based Research and the Higher Degree Research student

    Science.gov (United States)

    Kennedy-Clark, Shannon

    2013-01-01

    Design-based research lends itself to educational research as the aim of this approach is to develop and refine the design of artefacts, tools and curriculum and to advance existing theory or develop new theories that can support and lead to a deepened understanding of learning. This paper provides an overview of the potential benefits of using a…

  20. Harnessing VLSI System Design with EDA Tools

    CERN Document Server

    Kamat, Rajanish K; Gaikwad, Pawan K; Guhilot, Hansraj

    2012-01-01

    This book explores various dimensions of EDA technologies for achieving different goals in VLSI system design. Although the scope of EDA is very broad and comprises diversified hardware and software tools to accomplish different phases of VLSI system design, such as design, layout, simulation, testability, prototyping and implementation, this book focuses only on demystifying the code, a.k.a. firmware development and its implementation with FPGAs. Since there are a variety of languages for system design, this book covers various issues related to VHDL, Verilog and System C synergized with EDA tools, using a variety of case studies such as testability, verification and power consumption. * Covers aspects of VHDL, Verilog and Handel C in one text; * Enables designers to judge the appropriateness of each EDA tool for relevant applications; * Omits discussion of design platforms and focuses on design case studies; * Uses design case studies from diversified application domains such as network on chip, hospital on...

  1. Research by Design - a Research and Teaching Concept

    DEFF Research Database (Denmark)

    Hauberg, Jørgen; Tamke, Martin; Ramsgaard Thomsen, Mette

    2012-01-01

    Abstract. Interweaving research and design-based architectural education is an important effort in most architect schools. All good design is informed by some kind of researchresearch-based design. And all architect schools involve research in their teaching – research based education. Research...... by design. The paper asks how “the new” in architectural production emerges and aims to find similarities between the tradition of practice based proposals and theorisation, and our own research and teaching practice. Grounded in this practice the paper investigates how research by design contributes...... to the construction of knowledge and student’s learning outcomes through research led workshops. The paper presents research inquiries, results and methodologies of two parallel research workshops and discusses the format by which this research tool is developed. Keywords: Research by Design, practice-based research...

  2. Design of jigs, fixtures and press tools

    CERN Document Server

    Venkataraman, K

    2015-01-01

    Textbook presenting the fundamentals of tool design with special focus on jigs, fixtures and die design Covers sections on sheet metal forming processes; turning, grinding, broaching, welding and modular fixtures; principles of clamping; and an Introduction to Presses and Auxiliary Equipment Author has many years' experience in both academic and industrial environments, and presents this work in an easily-accessible style End of chapter questions and answers assist the learning process for both practicing tooling designers and engineers, and manufacturing en

  3. Low Achieving Eighth Graders Learn to Crack Word Problems: A Design Research Project for Aligning a Strategic Scaffolding Tool to Students' Mental Processes

    Science.gov (United States)

    Prediger, Susanne; Krägeloh, Nadine

    2015-01-01

    Topic-specific didactical design research provides means not only to investigate how to learn but also what to learn, i.e., for specifying learning contents by analyzing students' comprehension processes in detail. This important characteristic of didactical design research is exemplarily shown for students' difficulties in finding symbolic…

  4. A computer-based group discussion support tool for achieving consensus and culture change using the organisational culture assessment instrument (OCAI): an action design research study

    NARCIS (Netherlands)

    Lee Mui Suan, Jaclyn

    2015-01-01

    Organisational culture change is a long and complex process that typically takes years to complete and has a very low success rate. This Action Design Research Study in an educational setting, addresses the problem by the proposed use of an Action Design Research Methodology to build and deploy an

  5. Daylight prediction techniques in energy design tools

    Energy Technology Data Exchange (ETDEWEB)

    Milne, M.; Zurick, J. [California Univ., Los Angeles, Dept. of Architecture, CA (United States)

    1998-09-01

    Four different whole-building energy design tool systems that calculate energy savings from daylighting and that display annual performance on an-hour-by-hour basis, have been tested. The nature of design tools, the sources of hourly outdoor illuminance data, the ways of predicting indoor illumination, the assumptions of each tool, and the resulting energy savings of the design tools tested are discussed. The tests were carried out with the essential criteria for evaluating whole-building daylighting and energy design tools in mind. These have been identified as user confidence, accuracy, response time, and the amount of detail. Results of the tests, all four of them run on a single elementary school classroom for the sake of comparability, were provided. 9 refs., 2 figs.

  6. Research on optimization design of conformal cooling channels in hot stamping tool based on response surface methodology and multi-objective optimization

    Directory of Open Access Journals (Sweden)

    He Bin

    2016-01-01

    Full Text Available In order to optimize the layout of the conformal cooling channels in hot stamping tools, a response surface methodology and multi-objective optimization technique are proposed. By means of an Optimal Latin Hypercube experimental design method, a design matrix with 17 factors and 50 levels is generated. Three kinds of design variables, the radius Rad of the cooling channel, the distance H from the channel center to tool work surface and the ratio rat of each channel center, are optimized to determine the layout of cooling channels. The average temperature and temperature deviation of work surface are used to evaluate the cooling performance of hot stamping tools. On the basis of the experimental design results, quadratic response surface models are established to describe the relationship between the design variables and the evaluation objectives. The error analysis is performed to ensure the accuracy of response surface models. Then the layout of the conformal cooling channels is optimized in accordance with a multi-objective optimization method to find the Pareto optimal frontier which consists of some optimal combinations of design variables that can lead to an acceptable cooling performance.

  7. Queering Participatory Design Research

    Science.gov (United States)

    McWilliams, Jacob

    2016-01-01

    This article offers a way forward for educators and researchers interested in drawing on the principles of "queer theory" to inform participatory design. In this article, I aim to achieve two related goals: To introduce new concepts within a critical conceptual practice of questioning and challenging the "heterosexual matrix"…

  8. Development of a data capture tool for researching tech entrepreneurship

    DEFF Research Database (Denmark)

    Andersen, Jakob Axel Bejbro; Howard, Thomas J.; McAloone, Tim C.

    2014-01-01

    . This paper elucidates the requirements for such tools by drawing on knowledge of the entrepreneurial phenomenon and by building on the existing research tools used in design research. On this basis, the development of a capture method for tech startup processes is described and its potential discussed....

  9. REQUIREMENTS PROCESSING TOOLS AND THE BUILDING DESIGNERS MOTIVATION ON USE

    Directory of Open Access Journals (Sweden)

    Camila Pegoraro

    2017-04-01

    Full Text Available The successful development of projects requires, among other conditions, the ability to process requirements. In the construction literature, researchers have figured out that human difficulties was often at the root of Requirements Processing (RP problems throughout the design phases, and that the employment of tools could be a key factor for RP implementation. To check these outcomes and to look at how current practitioners behave in relation to the RP tools, an exploratory case study was conducted with a building design team from a public university. The aim of this paper was to investigate the perception of benefits and the motivation of designers regarding the RP tools. The results indicated that 42% of the participants are highly motivated to use new tools and that they have more interest in tools that deal directly with design activities than in those focused on data. Validation tools aroused interest as the most useful tools for designers. 66,7% of the participants mentioned that the tools can make the design process clearer, and that training and adaptation are crucial to promote acceptance and commitment to RP. The main contribution is the indication of gaps for further research and for tools improvement from the designers’ perspective.

  10. Tools and techniques for product design

    NARCIS (Netherlands)

    Lutters, Diederick; Houten, Fred J.A.M.; Bernard, Alain; Mermoz, Emmanuel; Schutte, Corné S.L.

    2014-01-01

    For product designers, tools and techniques are essential in driving the design cycle. Nevertheless, their employment usually is implicit, while passing over e.g. the design and project environments empowering their adequate use. This publication presents an overview of approaches in structuring and

  11. INTELLECTUAL PROPERTY RIGHTS ISSUES FOR RESEARCH TOOLS IN BIOTECHNOLOGY RESEARCH

    Directory of Open Access Journals (Sweden)

    Rekha Chaturvedi

    2015-09-01

    Full Text Available The research tools refer to the resources researchers need to use in experimental work. In Biotechnology, these can include cell lines, monoclonal antibodies, reagents, animal models, growth factors, combinatorial chemistry libraries, drug and drug targets, clones and cloning tools (such as PCR, method, laboratory equipment and machines, database and computer software. Research tools therefore serve as basis for upstream research to improve the present product or process. There are several challenges in the way of using patented research tools. IP issues with regard to research tools are important and may sometime pose hindrance for researchers. Hence in the case of patented research tools, IPR issues can compose a major hurdle for technology development. In majority instances research tools are permitted through MTAs for academic research and for imparting education. TRIPS provides a provision for exception to patent rights for experimental use of patented technology in scientific research and several countries including India have included this provision in their patent legislation. For commercially important work, licensing of research tools can be based on royalty or one time lump sum payment. Some patent owners of important high-end research tools for development of platform technology create problems in licensing which can impede research. Usually cost of a commercially available research tool is built up in its price.

  12. DELTA.M: A tool for metropolitan designing systems

    OpenAIRE

    Tisma, A.

    2001-01-01

    This research deals with the development of a tool to enable designers, decision-makers and citizens to jointly shape the physical environments they inhabit, through interaction and communication via electronic networks. The designing of physical environment becomes the collective responsibility of all interested societal actors, who together form a "designing system". This research defines a 'designing system' as a temporary alliance of people responsible for decisions about the spatial deve...

  13. RESEARCH CENTRIFUGE- ADVANCED TOOL SEPERATION

    OpenAIRE

    Mahajan Ashwini; Prof. B.V. Jain; Dr Surajj Sarode

    2015-01-01

    A centrifuge is a critical piece of equipment for the laboratory. Purpose of this study was to study research centrifuge in detail, its applications, uses in different branches and silent features. Their are two types of research centrifuge study here revolutionary research centrifuge and microprocessor research centrifuge. A centrifuge is a device that separates particles from a solution through use of a rotor. In biology, the particles are usually cells, sub cellular organelles, or large mo...

  14. On the Integration of Digital Design and Analysis Tools

    DEFF Research Database (Denmark)

    Klitgaard, Jens; Kirkegaard, Poul Henning

    2006-01-01

    The aim of this research is to look into integrated digital design and analysis tools in order to find out if it is suited for use by architects and designers or only by specialists and technicians - and if not, then to look at what can be done to make them more available to architects and design...

  15. Indoor Air Quality Design Tools for Schools

    Science.gov (United States)

    The information available here is presented as a tool to help school districts and facility planners design the next generation of learning environments so that the school facility will help, rather than hinder, schools in achieving their core mission

  16. Design, Research, and Design Research: Synergies and Contradictions

    Science.gov (United States)

    Nelson, Wayne A.

    2013-01-01

    Notions of design, research, and design research in the field of educational technology are quite different from conceptualizations held by other design fields. Examining the ways that research is conducted and used in educational technology in comparison to other design fields can provide novel insights into how research and design practice can…

  17. ASTROS: A multidisciplinary automated structural design tool

    Science.gov (United States)

    Neill, D. J.

    1989-01-01

    ASTROS (Automated Structural Optimization System) is a finite-element-based multidisciplinary structural optimization procedure developed under Air Force sponsorship to perform automated preliminary structural design. The design task is the determination of the structural sizes that provide an optimal structure while satisfying numerous constraints from many disciplines. In addition to its automated design features, ASTROS provides a general transient and frequency response capability, as well as a special feature to perform a transient analysis of a vehicle subjected to a nuclear blast. The motivation for the development of a single multidisciplinary design tool is that such a tool can provide improved structural designs in less time than is currently needed. The role of such a tool is even more apparent as modern materials come into widespread use. Balancing conflicting requirements for the structure's strength and stiffness while exploiting the benefits of material anisotropy is perhaps an impossible task without assistance from an automated design tool. Finally, the use of a single tool can bring the design task into better focus among design team members, thereby improving their insight into the overall task.

  18. Nursing students' evaluation of a new feedback and reflection tool for use in high-fidelity simulation - Formative assessment of clinical skills. A descriptive quantitative research design.

    Science.gov (United States)

    Solheim, Elisabeth; Plathe, Hilde Syvertsen; Eide, Hilde

    2017-11-01

    Clinical skills training is an important part of nurses' education programmes. Clinical skills are complex. A common understanding of what characterizes clinical skills and learning outcomes needs to be established. The aim of the study was to develop and evaluate a new reflection and feedback tool for formative assessment. The study has a descriptive quantitative design. 129 students participated who were at the end of the first year of a Bachelor degree in nursing. After highfidelity simulation, data were collected using a questionnaire with 19 closed-ended and 2 open-ended questions. The tool stimulated peer assessment, and enabled students to be more thorough in what to assess as an observer in clinical skills. The tool provided a structure for selfassessment and made visible items that are important to be aware of in clinical skills. This article adds to simulation literature and provides a tool that is useful in enhancing peer learning, which is essential for nurses in practice. The tool has potential for enabling students to learn about reflection and developing skills for guiding others in practice after they have graduated. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Investigating Design Research Landscapes through Exhibition

    DEFF Research Database (Denmark)

    Jönsson, Li; Hansen, Flemming Tvede; Mäkelä, Maarit

    2013-01-01

    What characterizes a design research exhibition compared to a traditional design and art exhibition? How do you show the very materialities of the design experiments as a means for communicating knowledge of research and of practice? How do you present, review and utilize such an exhibition......? With those questions in mind, the intention and challenge for the Nordes 2013 Design Research Exhibition was to expand on current notions of staging research enquires in design research conference contexts. Artefacts, installations, performances, and other materialities that relate to the theme...... of the conference - Experiments in Design Research – were displayed as tools to express and communicate different design research enquires. Through this paper we will describe the Nordes exhibition as a specific case that renders questions visible in relation to how to utilize a design research exhibition...

  20. Conceptual Design Tool for Concrete Shell Structures

    DEFF Research Database (Denmark)

    Holst, Malene Kirstine; Kirkegaard, Poul Henning

    2011-01-01

    This paper focuses on conceptual tools for concrete shell structures when working within the span of performance-based design and computational morphogenesis. The designer, referred to as the Architect-Engineer, works through several iterations parallel with aesthetic, functional and technical re...

  1. Designing Online Assessment Tools for Disengaged Youth

    Science.gov (United States)

    Brader, Andy; Luke, Allan; Klenowski, Val; Connolly, Stephen; Behzadpour, Adib

    2014-01-01

    This article reports on the development of online assessment tools for disengaged youth in flexible learning environments. Sociocultural theories of learning and assessment and Bourdieu's sociological concepts of capital and exchange were used to design a purpose-built content management system. This design experiment engaged participants in…

  2. Simulation tools for detector and instrument design

    DEFF Research Database (Denmark)

    Kanaki, Kalliopi; Kittelmann, Thomas; Cai, Xiao Xiao

    2018-01-01

    The high performance requirements at the European Spallation Source have been driving the technological advances on the neutron detector front. Now more than ever is it important to optimize the design of detectors and instruments, to fully exploit the ESS source brilliance. Most of the simulation...... a powerful set of tools to tailor the detector and instrument design to the instrument application....

  3. Integrated Design Tools for Embedded Control Systems

    NARCIS (Netherlands)

    Jovanovic, D.S.; Hilderink, G.H.; Broenink, Johannes F.; Karelse, F.

    2001-01-01

    Currently, computer-based control systems are still being implemented using the same techniques as 10 years ago. The purpose of this project is the development of a design framework, consisting of tools and libraries, which allows the designer to build high reliable heterogeneous real-time embedded

  4. Software tools for the particle accelerator designs

    International Nuclear Information System (INIS)

    Sugimoto, Masayoshi

    1988-01-01

    The software tools used for the designs of the particle accelerators are going to be implemented on the small computer systems, such as the personal computers or the work stations. These are called from the interactive environment like a window application program. The environment contains the small expert system to make easy to select the design parameters. (author)

  5. Analytical Tools for Space Suit Design

    Science.gov (United States)

    Aitchison, Lindsay

    2011-01-01

    As indicated by the implementation of multiple small project teams within the agency, NASA is adopting a lean approach to hardware development that emphasizes quick product realization and rapid response to shifting program and agency goals. Over the past two decades, space suit design has been evolutionary in approach with emphasis on building prototypes then testing with the largest practical range of subjects possible. The results of these efforts show continuous improvement but make scaled design and performance predictions almost impossible with limited budgets and little time. Thus, in an effort to start changing the way NASA approaches space suit design and analysis, the Advanced Space Suit group has initiated the development of an integrated design and analysis tool. It is a multi-year-if not decadal-development effort that, when fully implemented, is envisioned to generate analysis of any given space suit architecture or, conversely, predictions of ideal space suit architectures given specific mission parameters. The master tool will exchange information to and from a set of five sub-tool groups in order to generate the desired output. The basic functions of each sub-tool group, the initial relationships between the sub-tools, and a comparison to state of the art software and tools are discussed.

  6. Technics Research on Polycrystalline Cubic Boron Nitride Cutting Tools Dry Turning Ti-6AL-4V Alloy Based on Orthogonal Experimental Design

    Directory of Open Access Journals (Sweden)

    Jia Yunhai

    2018-01-01

    Full Text Available Ti-6Al-4V components are the most widely used titanium alloy products not only in the aerospace industry, but also for bio-medical applications. The machine-ability of titanium alloys is impaired by their high temperature chemical reactivity, low thermal conductivity and low modulus of elasticity. Polycrystalline cubic boron nitride represents a substitute tool material for turning titanium alloys due to its high hardness, wear resistance, thermal stability and hot red hardness. For determination of suitable cutting parameters in dry turning Ti-6AL-4V alloy by Polycrystalline cubic boron nitride cutting tools, the samples, 300mm in length and 100mm in diameter, were dry machined in a lathe. The turning suitable parameters, such as cutting speed, feed rate and cut depth were determined according to workpieces surface roughness and tools flank wear based on orthogonal experimental design. The experiment showed that the cutting speed in the range of 160~180 m/min, the feed rate is 0.15 mm/rev and the depth of cut is 0.20mm, ideal workpiece surface roughness and little cutting tools flank wear can be obtained.

  7. New tools for evaluating LQAS survey designs

    OpenAIRE

    Hund, Lauren

    2014-01-01

    Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are pr...

  8. Topics in expert system design methodologies and tools

    CERN Document Server

    Tasso, C

    1989-01-01

    Expert Systems are so far the most promising achievement of artificial intelligence research. Decision making, planning, design, control, supervision and diagnosis are areas where they are showing great potential. However, the establishment of expert system technology and its actual industrial impact are still limited by the lack of a sound, general and reliable design and construction methodology.This book has a dual purpose: to offer concrete guidelines and tools to the designers of expert systems, and to promote basic and applied research on methodologies and tools. It is a coordinated coll

  9. Empirical Research In Engineering Design

    DEFF Research Database (Denmark)

    Ahmed, Saeema

    2007-01-01

    Increasingly engineering design research involves the use of empirical studies that are conducted within an industrial environment [Ahmed, 2001; Court 1995; Hales 1987]. Research into the use of information by designers or understanding how engineers build up experience are examples of research...... of research issues. This paper describes case studies of empirical research carried out within industry in engineering design focusing upon information, knowledge and experience in engineering design. The paper describes the research methods employed, their suitability for the particular research aims...

  10. Expressive Design Tools: Procedural Content Generation for Game Designers

    OpenAIRE

    Smith, Gillian Margaret

    2012-01-01

    Games are shaped by the tools we use to make them and our ability to model the concepts they address. Vast improvements in computer graphics technology, processing power, storage capacity, and physics simulations have driven game design for the past forty years, leading to beautiful, spacious, detailed, and highly immersive worlds supporting games that are, for the most part, fundamentally about movement, collision, and other physics-based concepts. Designers use increasingly complex tools th...

  11. Design for Motivation: Evaluation of a Design Tool

    Directory of Open Access Journals (Sweden)

    Dimitra Chasanidou

    2018-02-01

    Full Text Available Design for motivation constitutes a design practice that focuses on the activation of human motives to perform an action. There is an increasing need to design motivational and engaging mechanisms for voluntary systems, such as innovation platforms, where user participation is a key target. When designing for motivation, a challenge of the early design phases is the selection of appropriate design tool and strategy. The current work presents a design tool, namely DEMO (DEsign for MOtivation, and evaluates its design process. The tool provides multidisciplinary teams with a user-centred, structured method to ideate and ultimately develop a consistent design plan to engage the users of innovation platforms. The evaluation study analysed the tool’s contribution to the design of motivational innovation platforms, utilising three data collection methods: a protocol analysis, interviews and questionnaires. The results discuss the experiences of 32 users with the development of motivation concepts, the group and the user activities, as well as their creativity aspects. Structured processes and the use of artefacts were found to be productive practices in the early design phases. The results also highlight the importance of multidisciplinary and user-centred teams that can enhance collaboration and communication during the design processes.

  12. An Action Design Research on development and deployment of a computer-based group discussion support tool for achieving consensus and culture change at an educational institution

    NARCIS (Netherlands)

    Lee Mui Suan, Jaclyn; van Hillegersberg, Jos; Kumar, Kuldeep

    2015-01-01

    Organisational culture change is a long and complex process that typically takes years to complete and has a very low success rate. This project addresses the problem by the proposed use of an Action Design Research Methodology to build and deploy an IT artifact named Organisational Culture

  13. Bioinformatic tools and guideline for PCR primer design | Abd ...

    African Journals Online (AJOL)

    Bioinformatics has become an essential tool not only for basic research but also for applied research in biotechnology and biomedical sciences. Optimal primer sequence and appropriate primer concentration are essential for maximal specificity and efficiency of PCR. A poorly designed primer can result in little or no ...

  14. Moving research tools into practice: the successes and challenges in promoting uptake of classification tools.

    Science.gov (United States)

    Cunningham, Barbara Jane; Hidecker, Mary Jo Cooley; Thomas-Stonell, Nancy; Rosenbaum, Peter

    2018-05-01

    In this paper, we present our experiences - both successes and challenges - in implementing evidence-based classification tools into clinical practice. We also make recommendations for others wanting to promote the uptake and application of new research-based assessment tools. We first describe classification systems and the benefits of using them in both research and practice. We then present a theoretical framework from Implementation Science to report strategies we have used to implement two research-based classification tools into practice. We also illustrate some of the challenges we have encountered by reporting results from an online survey investigating 58 Speech-language Pathologists' knowledge and use of the Communication Function Classification System (CFCS), a new tool to classify children's functional communication skills. We offer recommendations for researchers wanting to promote the uptake of new tools in clinical practice. Specifically, we identify structural, organizational, innovation, practitioner, and patient-related factors that we recommend researchers address in the design of implementation interventions. Roles and responsibilities of both researchers and clinicians in making implementations science a success are presented. Implications for rehabilitation Promoting uptake of new and evidence-based tools into clinical practice is challenging. Implementation science can help researchers to close the knowledge-to-practice gap. Using concrete examples, we discuss our experiences in implementing evidence-based classification tools into practice within a theoretical framework. Recommendations are provided for researchers wanting to implement new tools in clinical practice. Implications for researchers and clinicians are presented.

  15. Design Process-System and Methodology of Design Research

    Science.gov (United States)

    Bashier, Fathi

    2017-10-01

    Studies have recognized the failure of the traditional design approach both in practice and in the studio. They showed that design problems today are too complex for the traditional approach to cope with and reflected a new interest in a better quality design services in order to meet the challenges of our time. In the mid-1970s and early 1980s, there has been a significant shift in focus within the field of design research towards the aim of creating a ‘design discipline’. The problem, as will be discussed, is the lack of an integrated theory of design knowledge that can explicitly describe the design process in a coherent way. As a consequence, the traditional approach fails to operate systematically, in a disciplinary manner. Addressing this problem is the primary goal of the research study in the design process currently being conducted in the research-based master studio at Wollega University, Ethiopia. The research study seeks to make a contribution towards a disciplinary approach, through proper understanding the mechanism of knowledge development within design process systems. This is the task of the ‘theory of design knowledge’. In this article the research project is introduced, and a model of the design process-system is developed in the studio as a research plan and a tool of design research at the same time. Based on data drawn from students’ research projects, the theory of design knowledge is developed and empirically verified through the research project.

  16. Graphical Acoustic Liner Design and Analysis Tool

    Science.gov (United States)

    Howerton, Brian M. (Inventor); Jones, Michael G. (Inventor)

    2016-01-01

    An interactive liner design and impedance modeling tool comprises software utilized to design acoustic liners for use in constrained spaces, both regularly and irregularly shaped. A graphical user interface allows the acoustic channel geometry to be drawn in a liner volume while the surface impedance calculations are updated and displayed in real-time. A one-dimensional transmission line model may be used as the basis for the impedance calculations.

  17. Proverbs : Probabilistic design tools for vertical breakwaters

    NARCIS (Netherlands)

    Oumeraci, H.; Allsop, N.W.H.; De Groot, M.B.; Crouch, R.S.; Vrijling, J.K.

    1999-01-01

    Final report and appendices of the European project Proverbs on tools for the design of vertical breakwaters (caisson type breakwaters) and similar hydraulic structures in the coastal zone. It includes the loads (waves) as well as the strength of the structure (geotechnial aspects, structural

  18. Design Tools and Workflows for Braided Structures

    DEFF Research Database (Denmark)

    Vestartas, Petras; Heinrich, Mary Katherine; Zwierzycki, Mateusz

    2017-01-01

    the objectives and motivation for our exploration of braid within an architectural context and highlighting both the relevance of braid and current lack of suitable design modelling tools to support our approach. We briefly introduce the state-of-the-art in braid representation and present the characteristics...

  19. Synthesizing Knowledge in Design Research

    DEFF Research Database (Denmark)

    Piirainen, Kalle A.

    2016-01-01

    The chapter discusses knowledge synthesis in design research, bringing together the perspectives of experimental design research, or Research in Design Context that is treated extensively elsewhere in this book, and Design Inclusive Research as well as Practice-based Design Research. Specific...... attention is paid to the question of how practice-based or problem-driven design research processes can be rigorous and yield contributions to knowledge. The main argument in this chapter is that a key to knowledge synthesis and scientific contribution is setting explicit design propositions...... that are instantiated within design artefacts, and evaluated rigorously. The chapter starts with a discussion of knowledge creation and synthesis within design research.Following this, the chapter moves on to focus on setting a methodological framework for deriving design propositions. Lastly the chapter elaborates...

  20. New tools for evaluating LQAS survey designs.

    Science.gov (United States)

    Hund, Lauren

    2014-02-15

    Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are provided for calculating the positive and negative predictive value of a design with respect to an underlying coverage distribution and the selected design parameters. These tools are illustrated using a data example from two consecutive LQAS surveys measuring Oral Rehydration Solution (ORS) preparation. Using the survey tools, the dependence of classification accuracy on benchmark selection and the width of the 'grey region' are clarified in the context of ORS preparation across seven supervision areas. Following the completion of an LQAS survey, estimation of the distribution of coverage across areas facilitates quantifying classification accuracy and can help guide intervention decisions.

  1. IT-tool Concept for Design and Intelligent Motion Control

    DEFF Research Database (Denmark)

    Conrad, Finn; Hansen, Poul Erik; Sørensen, Torben

    2000-01-01

    The paper presents results obtained from a Danish mechatronic research program focusing on intelligent motion control as well as results from the Esprit project SWING on IT-tools for rapid prototyping of fluid power components and systems. A mechatronic test facility with digital controllers for ....... Furthermore, a developed IT-tool concept for controller and system design utilising the ISO 10303 STEP Standard is proposed....

  2. Robust Unconventional Interaction Design and Hybrid Tool Environments for Design and Engineering Processes

    NARCIS (Netherlands)

    Wendrich, Robert E.; Kruiper, Ruben

    2017-01-01

    This paper investigates how and whether existing or current design tools, assist and support designers and engineers in the early-phases of ideation and conceptualization stages of design and engineering processes. The research explores how fluidly and/or congruously technology affords cognitive,

  3. Design Tools and Workflows for Braided Structures

    DEFF Research Database (Denmark)

    Vestartas, Petras; Heinrich, Mary Katherine; Zwierzycki, Mateusz

    2017-01-01

    and merits of our method, demonstrated though four example design and analysis workflows. The workflows frame specific aspects of enquiry for the ongoing research project flora robotica. These include modelling target geometries, automatically producing instructions for fabrication, conducting structural...

  4. Designing requirements engineering research

    NARCIS (Netherlands)

    Wieringa, Roelf J.; Heerkens, Johannes M.G.

    2007-01-01

    Engineering sciences study different topics than natural sciences, and utility is an essential factor in choosing engineering research problems. But despite these differences, research methods for the engineering sciences are no different than research methods for any other kind of science. At most

  5. Developing a Conceptual Design Engineering Toolbox and its Tools

    Directory of Open Access Journals (Sweden)

    R. W. Vroom

    2004-01-01

    Full Text Available In order to develop a successful product, a design engineer needs to pay attention to all relevant aspects of that product. Many tools are available, software, books, websites, and commercial services. To unlock these potentially useful sources of knowledge, we are developing C-DET, a toolbox for conceptual design engineering. The idea of C-DET is that designers are supported by a system that provides them with a knowledge portal on one hand, and a system to store their current work on the other. The knowledge portal is to help the designer to find the most appropriate sites, experts, tools etc. at a short notice. Such a toolbox offers opportunities to incorporate extra functionalities to support the design engineering work. One of these functionalities could be to help the designer to reach a balanced comprehension in his work. Furthermore C-DET enables researchers in the area of design engineering and design engineers themselves to find each other or their work earlier and more easily. Newly developed design tools that can be used by design engineers but have not yet been developed up to a commercial level could be linked to by C-DET. In this way these tools can be evaluated in an early stage by design engineers who would like to use them. This paper describes the first prototypes of C-DET, an example of the development of a design tool that enables designers to forecast the use process and an example of the future functionalities of C-DET such as balanced comprehension.

  6. AGILE, a tool for interactive lattice design

    CERN Document Server

    Bryant, P J

    2000-01-01

    AGILE is a program that works in the IBM-PC, MS-Windows environment and is dedicated to the interactive design of alternating-gradient lattices for synchrotrons and transfer lines. The program was originally intended as a teaching tool, but has been used mostly for professional design work and is subject to continuous development. It contains original algorithms for coupling, scattering and eddy currents, and some slightly unusual algorithms for off-axis orbits and space charge. There are also additional features such as engineering design aids, calculators for relativistic and synchrotron radiation parameters, expert routines for optimising slow extraction, fitting and matching, and the internal storage of constants for over 1000 stable and quasi-stable charged particles. The program is object-oriented and fully integrated into the Windows environment - it is not a shell. Apart from office work, AGILE is ideal for home use, design workshops and when travelling. It is particularly suited to practical problems...

  7. Challenges in Nordic Design Research

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    1996-01-01

    Design research has not won a convincing reputation in industry. Nordic research being scattered and small in number of researchers should find its special strengths and focus on creating results, which are based on our peculiar conditions and background.......Design research has not won a convincing reputation in industry. Nordic research being scattered and small in number of researchers should find its special strengths and focus on creating results, which are based on our peculiar conditions and background....

  8. Software tool for portal dosimetry research.

    Science.gov (United States)

    Vial, P; Hunt, P; Greer, P B; Oliver, L; Baldock, C

    2008-09-01

    This paper describes a software tool developed for research into the use of an electronic portal imaging device (EPID) to verify dose for intensity modulated radiation therapy (IMRT) beams. A portal dose image prediction (PDIP) model that predicts the EPID response to IMRT beams has been implemented into a commercially available treatment planning system (TPS). The software tool described in this work was developed to modify the TPS PDIP model by incorporating correction factors into the predicted EPID image to account for the difference in EPID response to open beam radiation and multileaf collimator (MLC) transmitted radiation. The processes performed by the software tool include; i) read the MLC file and the PDIP from the TPS, ii) calculate the fraction of beam-on time that each point in the IMRT beam is shielded by MLC leaves, iii) interpolate correction factors from look-up tables, iv) create a corrected PDIP image from the product of the original PDIP and the correction factors and write the corrected image to file, v) display, analyse, and export various image datasets. The software tool was developed using the Microsoft Visual Studio.NET framework with the C# compiler. The operation of the software tool was validated. This software provided useful tools for EPID dosimetry research, and it is being utilised and further developed in ongoing EPID dosimetry and IMRT dosimetry projects.

  9. Research through designing?

    NARCIS (Netherlands)

    Lenzholzer, S.; Poerschke, U.; Staub, A.; Pihlak, M.; Cooper, J.

    2011-01-01

    With this panel-contribution I will address a lacuna in landscape architecture theory on the connection of the role of ‘research through designing’. I consider the role of ‘research through designing’ crucial for the further production of new practical knowledge within landscape architecture. The

  10. Computing tools for implementing standards for single-case designs.

    Science.gov (United States)

    Chen, Li-Ting; Peng, Chao-Ying Joanne; Chen, Ming-E

    2015-11-01

    In the single-case design (SCD) literature, five sets of standards have been formulated and distinguished: design standards, assessment standards, analysis standards, reporting standards, and research synthesis standards. This article reviews computing tools that can assist researchers and practitioners in meeting the analysis standards recommended by the What Works Clearinghouse: Procedures and Standards Handbook-the WWC standards. These tools consist of specialized web-based calculators or downloadable software for SCD data, and algorithms or programs written in Excel, SAS procedures, SPSS commands/Macros, or the R programming language. We aligned these tools with the WWC standards and evaluated them for accuracy and treatment of missing data, using two published data sets. All tools were tested to be accurate. When missing data were present, most tools either gave an error message or conducted analysis based on the available data. Only one program used a single imputation method. This article concludes with suggestions for an inclusive computing tool or environment, additional research on the treatment of missing data, and reasonable and flexible interpretations of the WWC standards. © The Author(s) 2015.

  11. Drawing as a user experience research tool

    DEFF Research Database (Denmark)

    Fleury, Alexandre

    2011-01-01

    such previous work, two case studies are presented, in which drawings helped investigate the relationship between media technology users and two specific devices, namely television and mobile phones. The experiment generated useful data and opened for further consideration of the method as an appropriate HCI...... research tool....

  12. The Design Researcher in Quandary

    DEFF Research Database (Denmark)

    Kinch, Sofie; Fogtman, Majken Hillerup

    2011-01-01

    In the field of practice-based research we articulate the dilemma that emerges as the creative designer embraces the role of being an interaction design researcher. We exemplify the dilemma in a specific design case originating from a PhD project. In this case, we use sketching to illustrate how...... the design researcher embodies the creative designer at all times. We show how the dilemma becomes tangible in the conversation with the material when having to manage a set of design constraints, concerns and sensibilities. We acknowledge that when taking on both roles at the same time there are two...

  13. Reflections on Design Methodology Research

    DEFF Research Database (Denmark)

    2011-01-01

    We shall reflect on the results of Design Methodology research and their impact on design practice. In the past 50 years the number of researchers in the field has expanded enormously – as has the number of publications. During the same period design practice and its products have changed...... and produced are also now far more complex and distributed, putting designers under ever increasing pressure. We shall address the question: Are the results of Design Methodology research appropriate and are they delivering the expected results in design practice? In our attempt to answer this question we...

  14. Game Design as STS Research

    Directory of Open Access Journals (Sweden)

    Joseph Dumit

    2017-09-01

    Full Text Available Game design offers a powerful pedagogical paradigm for engaging students in thinking and researching sociotechnical systems. Using the example of designing a game around fracking, this paper describes how game design grapples with emergent dynamic processes, and how students are drawn into becoming STS researchers.

  15. Graphic Design for Researchers

    Science.gov (United States)

    Regional Educational Laboratory, 2014

    2014-01-01

    Technology continues to radically change how we create and consume information. Today, news, reports, and other material are often delivered quickly through pictures, colors, or other eye-catching visual elements. Words still matter, but they may be tweeted, viewed on a smartphone, or placed in a call-out box in a report. The design of these items…

  16. Design Package for Fuel Retrieval System Fuel Handling Tool Modification

    International Nuclear Information System (INIS)

    TEDESCHI, D.J.

    2000-01-01

    This design package documents design, fabrication, and testing of new stinger tool design. Future revisions will document further development of the stinger tool and incorporate various developmental stages, and final test results

  17. Advanced Vibration Analysis Tool Developed for Robust Engine Rotor Designs

    Science.gov (United States)

    Min, James B.

    2005-01-01

    The primary objective of this research program is to develop vibration analysis tools, design tools, and design strategies to significantly improve the safety and robustness of turbine engine rotors. Bladed disks in turbine engines always feature small, random blade-to-blade differences, or mistuning. Mistuning can lead to a dramatic increase in blade forced-response amplitudes and stresses. Ultimately, this results in high-cycle fatigue, which is a major safety and cost concern. In this research program, the necessary steps will be taken to transform a state-of-the-art vibration analysis tool, the Turbo- Reduce forced-response prediction code, into an effective design tool by enhancing and extending the underlying modeling and analysis methods. Furthermore, novel techniques will be developed to assess the safety of a given design. In particular, a procedure will be established for using natural-frequency curve veerings to identify ranges of operating conditions (rotational speeds and engine orders) in which there is a great risk that the rotor blades will suffer high stresses. This work also will aid statistical studies of the forced response by reducing the necessary number of simulations. Finally, new strategies for improving the design of rotors will be pursued.

  18. Design of a multipurpose research reactor

    International Nuclear Information System (INIS)

    Sanchez Rios, A.A.

    1990-01-01

    The availability of a research reactor is essential in any endeavor to improve the execution of a nuclear programme, since it is a very versatile tool which can make a decisive contribution to a country's scientific and technological development. Because of their design, however, many existing research reactors are poorly adapted to certain uses. In some nuclear research centres, especially in the advanced countries, changes have been made in the original designs or new research prototypes have been designed for specific purposes. These modifications have proven very costly and therefore beyond the reach of developing countries. For this reason, what the research institutes in such countries need is a single sufficiently versatile nuclear plant capable of meeting the requirements of a nuclear research programme at a reasonable cost. This is precisely what a multipurpose reactor does. The Mexican National Nuclear Research Institute (ININ) plans to design and build a multipurpose research reactor capable at the same time of being used for the development of reactor design skills and for testing nuclear materials and fuels, for radioisotopes production, for nuclear power studies and basic scientific research, for specialized training, and so on. For this design work on the ININ Multipurpose Research Reactor, collaborative relations have been established with various international organizations possessing experience in nuclear reactor design: Atomehnergoeksport of the USSR: Atomic Energy of Canada Limited (AECL); General Atomics (GA) of the USA; and Japan Atomic Energy Research Institute

  19. Design of Scalable and Effective Earth Science Collaboration Tool

    Science.gov (United States)

    Maskey, M.; Ramachandran, R.; Kuo, K. S.; Lynnes, C.; Niamsuwan, N.; Chidambaram, C.

    2014-12-01

    Collaborative research is growing rapidly. Many tools including IDEs are now beginning to incorporate new collaborative features. Software engineering research has shown the effectiveness of collaborative programming and analysis. In particular, drastic reduction in software development time resulting in reduced cost has been highlighted. Recently, we have witnessed the rise of applications that allow users to share their content. Most of these applications scale such collaboration using cloud technologies. Earth science research needs to adopt collaboration technologies to reduce redundancy, cut cost, expand knowledgebase, and scale research experiments. To address these needs, we developed the Earth science collaboration workbench (CWB). CWB provides researchers with various collaboration features by augmenting their existing analysis tools to minimize learning curve. During the development of the CWB, we understood that Earth science collaboration tasks are varied and we concluded that it is not possible to design a tool that serves all collaboration purposes. We adopted a mix of synchronous and asynchronous sharing methods that can be used to perform collaboration across time and location dimensions. We have used cloud technology for scaling the collaboration. Cloud has been highly utilized and valuable tool for Earth science researchers. Among other usages, cloud is used for sharing research results, Earth science data, and virtual machine images; allowing CWB to create and maintain research environments and networks to enhance collaboration between researchers. Furthermore, collaborative versioning tool, Git, is integrated into CWB for versioning of science artifacts. In this paper, we present our experience in designing and implementing the CWB. We will also discuss the integration of collaborative code development use cases for data search and discovery using NASA DAAC and simulation of satellite observations using NASA Earth Observing System Simulation

  20. Applied regression analysis a research tool

    CERN Document Server

    Pantula, Sastry; Dickey, David

    1998-01-01

    Least squares estimation, when used appropriately, is a powerful research tool. A deeper understanding of the regression concepts is essential for achieving optimal benefits from a least squares analysis. This book builds on the fundamentals of statistical methods and provides appropriate concepts that will allow a scientist to use least squares as an effective research tool. Applied Regression Analysis is aimed at the scientist who wishes to gain a working knowledge of regression analysis. The basic purpose of this book is to develop an understanding of least squares and related statistical methods without becoming excessively mathematical. It is the outgrowth of more than 30 years of consulting experience with scientists and many years of teaching an applied regression course to graduate students. Applied Regression Analysis serves as an excellent text for a service course on regression for non-statisticians and as a reference for researchers. It also provides a bridge between a two-semester introduction to...

  1. Dynamics of Research through Design

    DEFF Research Database (Denmark)

    Basballe, Ditte Amund; Halskov, Kim

    2012-01-01

    In this paper, we investigate Research through Design at a micro-level, by addressing the dynamic interplay of research and design as they unfold throughout a design process. As our principal case, we consider the design of a three-dimensional projection installation, a process that unfolded over...... a one-year period. We analyse material collected from 18 key events during the process, in order to identify the ongoing dynamics. Based on the analysis, we establish how the interplay evolves in a complex structure, where the design and research interests continuously couple, interweave, and decouple...

  2. Dynamics of Research through Design

    DEFF Research Database (Denmark)

    Basballe, Ditte Amund; Halskov, Kim

    2012-01-01

    a one-year period. We analyse material collected from 18 key events during the process, in order to identify the ongoing dynamics. Based on the analysis, we establish how the interplay evolves in a complex structure, where the design and research interests continuously couple, interweave, and decouple......In this paper, we investigate Research through Design at a micro-level, by addressing the dynamic interplay of research and design as they unfold throughout a design process. As our principal case, we consider the design of a three-dimensional projection installation, a process that unfolded over...

  3. Justifying the design and selection of literacy and thinking tools

    Directory of Open Access Journals (Sweden)

    David Whitehead

    2008-10-01

    Full Text Available Criteria for the design and selection of literacy and thinking tools that allow educators to justify what they do are described within a wider framework of learning theory and research into best practice. Based on a meta-analysis of best practice, results from a three year project designed to evaluate the effectiveness of a secondary school literacy initiative in New Zealand, together with recent research from cognitive and neuro-psychologists, it is argued that the design and selection of literacy and thinking tools used in elementary schools should be consistent with (i teaching focused (ii learner focused, (iii thought linked (iv neurologically consistent, (v subject specific, (vi text linked, (vii developmentally appropriate, and (viii assessment linked criteria.

  4. Electronic circuit design with HEP computational tools

    International Nuclear Information System (INIS)

    Vaz, Mario

    1996-01-01

    CPSPICE is an electronic circuit statistical simulation program developed to run in a parallel environment under UNIX operating system and TCP/IP communications protocol, using CPS - Cooperative Processes Software , SPICE program and CERNLIB software package. It is part of a set of tools being develop, intended to help electronic engineers to design, model and simulate complex systems and circuits for High Energy Physics detectors, based on statistical methods, using the same software and methodology used by HEP physicists for data analysis. CPSPICE simulates electronic circuits by Monte Carlo method, through several different processes running simultaneously SPICE in UNIX parallel computers or workstation farms. Data transfer between CPS processes for a modified version of SPICE2G6 is done by RAM memory, but can also be done through hard disk files if no source files are available for the simulator, and for bigger simulation outputs files. Simulation results are written in a HBOOK file as a NTUPLE, to be examined by HBOOK in batch model or graphics, and analyzed by statistical procedures available. The HBOOK file be stored on hard disk for small amount of data, or into Exabyte tape file for large amount of data. HEP tools also helps circuit or component modeling, like MINUT program from CERNLIB, that implements Nelder and Mead Simplex and Gradient with or without derivatives algorithms, and can be used for design optimization.This paper presents CPSPICE program implementation. The scheme adopted is suitable to make parallel other electronic circuit simulators. (author)

  5. Fashion Research at Design Schools

    DEFF Research Database (Denmark)

    Skjold, Else

    2008-01-01

    as a continuation of the way teaching in fashion design and research on fashion is perceived in the various cases. This of course implements the fact that there are very diverse perceptions on what fashion research is.  A main discussion therefore concerns current methodological diversities in fashion research......The report “Fashion Research at Design Schools” (2008), which was commissioned by Institute for Fashion and Textiles at Designskolen Kolding,  appoints the potentials and challenges in relation to the ongoing academization of design schools, with a specific focus on fashion research. The key...... research question is: “What kind of fashion design education is Designskolen Kolding aiming to offer in the future, what kind of skills will the students need in their future work place, the fashion industry, and can research work as a potential in this process?”   The study is based on qualitative...

  6. Design research and industrial applicability

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    1997-01-01

    Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry.......Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry....

  7. Tools for Stakeholder Involvement in Facility Management Service Design

    DEFF Research Database (Denmark)

    Nardelli, Giulia; Scupola, Ada

    that are more in line with the stakeholder needs and expectations, and may thus result in increased customer satisfaction, better services and, at the very end, an increased competitive advantage for the organization. Background: The background of this study lies in user involvement in service design...... in the design process as well as FM service provision processes. Research limitations: The major limitation of the study consists of the relatively small amount of interviews conducted, which is the basis for finding the tools in FM service design processes....

  8. Research design: the methodology for interdisciplinary research framework.

    Science.gov (United States)

    Tobi, Hilde; Kampen, Jarl K

    2018-01-01

    Many of today's global scientific challenges require the joint involvement of researchers from different disciplinary backgrounds (social sciences, environmental sciences, climatology, medicine, etc.). Such interdisciplinary research teams face many challenges resulting from differences in training and scientific culture. Interdisciplinary education programs are required to train truly interdisciplinary scientists with respect to the critical factor skills and competences. For that purpose this paper presents the Methodology for Interdisciplinary Research (MIR) framework. The MIR framework was developed to help cross disciplinary borders, especially those between the natural sciences and the social sciences. The framework has been specifically constructed to facilitate the design of interdisciplinary scientific research, and can be applied in an educational program, as a reference for monitoring the phases of interdisciplinary research, and as a tool to design such research in a process approach. It is suitable for research projects of different sizes and levels of complexity, and it allows for a range of methods' combinations (case study, mixed methods, etc.). The different phases of designing interdisciplinary research in the MIR framework are described and illustrated by real-life applications in teaching and research. We further discuss the framework's utility in research design in landscape architecture, mixed methods research, and provide an outlook to the framework's potential in inclusive interdisciplinary research, and last but not least, research integrity.

  9. Computational Tools for RF Structure Design

    CERN Document Server

    Jensen, E

    2004-01-01

    The Finite Differences Method and the Finite Element Method are the two principally employed numerical methods in modern RF field simulation programs. The basic ideas behind these methods are explained, with regard to available simulation programs. We then go through a list of characteristic parameters of RF structures, explaining how they can be calculated using these tools. With the help of these parameters, we introduce the frequency-domain and the time-domain calculations, leading to impedances and wake-fields, respectively. Subsequently, we present some readily available computer programs, which are in use for RF structure design, stressing their distinctive features and limitations. One final example benchmarks the precision of different codes for calculating the eigenfrequency and Q of a simple cavity resonator.

  10. A Framework for IT-based Design Tools

    DEFF Research Database (Denmark)

    Hartvig, Susanne C

    The thesis presents a new apprach to develop design tools that can be integrated, bypresenting a framework consisting of a set of guidelines for design tools, an integration andcommunication scheme, and a set of design tool schemes.This framework has been based onanalysis of requirements to integ...... to integrated design enviornments, and analysis of engineeringdesign and design problem solving methods. And the developed framework has been testedby applying it to development of prototype design tools for realistic design scenarios.......The thesis presents a new apprach to develop design tools that can be integrated, bypresenting a framework consisting of a set of guidelines for design tools, an integration andcommunication scheme, and a set of design tool schemes.This framework has been based onanalysis of requirements...

  11. Justifying the design and selection of literacy and thinking tools

    Directory of Open Access Journals (Sweden)

    David Whitehead

    2008-10-01

    Full Text Available Criteria for the design and selection of literacy and thinking tools that allow educators to justifywhat they do are described within a wider framework of learning theory and research into bestpractice. Based on a meta-analysis of best practice, results from a three year project designedto evaluate the effectiveness of a secondary school literacy initiative in New Zealand, togetherwith recent research from cognitive and neuro-psychologists, it is argued that the design andselection of literacy and thinking tools used in elementary schools should be consistent with (iteaching focused (ii learner focused, (iii thought linked (iv neurologically consistent, (vsubject specific, (vi text linked, (vii developmentally appropriate, and (viii assessment linkedcriteria.

  12. Designing a tool for curriculum leadership development in postgraduate programs

    Directory of Open Access Journals (Sweden)

    M Avizhgan

    2016-07-01

    Full Text Available Introduction: Leadership in the area of curriculum development is increasingly important as we look for ways to improve our programmes and practices. In curriculum studies, leadership has received little attention. Considering the lack of an evaluation tool with objective criteria in postgraduate curriculum leadership process, this study aimed to design a specific tool and determine the validity and reliability of the tool. Method: This study is a methodological research.  At first, domains and items of the tool were determined through expert interviews and literature review. Then, using Delphi technique, 54 important criteria were developed. A panel of experts was used to confirm content and face validity. Reliability was determined by a descriptive study in which 30 faculties from two of Isfahan universities and was estimated by internal consistency. The data were analyzed by SPSS software, using Pearson Correlation Coefficient and reliability analysis. Results: At first, considering the definition of curriculum leadership determined the domains and items of the tool and they were developed primary tool. Expert’s faculties’ views were used in deferent stages of development and psychometry. The tool internal consistency with Cronbach's alpha coefficient times was 96.5. This was determined for each domain separately. Conclution: Applying this instrument can improve the effectiveness of curriculum leadership. Identifying the characteristics of successful and effective leaders, and utilizing this knowledge in developing and implementing curriculum might help us to have better respond to the changing needs of our students, teachers and schools of tomorrow.

  13. Design tool for offshore wind farm clusters

    DEFF Research Database (Denmark)

    Hasager, Charlotte Bay; Giebel, Gregor; Waldl, Igor

    2015-01-01

    . The software includes wind farm wake models, energy yield models, inter-array and long cable and grid component models, grid code compliance and ancillary services models. The common score for evaluation in order to compare different layouts is levelized cost of energy (LCoE). The integrated DTOC software...... Research Alliance (EERA) and a number of industrial partners. The approach has been to develop a robust, efficient, easy to use and flexible tool, which integrates software relevant for planning offshore wind farms and wind farm clusters and supports the user with a clear optimization work flow...... is developed within the project using open interface standards and is now available as the commercial software product Wind&Economy....

  14. Research design and statistical analysis

    CERN Document Server

    Myers, Jerome L; Lorch Jr, Robert F

    2013-01-01

    Research Design and Statistical Analysis provides comprehensive coverage of the design principles and statistical concepts necessary to make sense of real data.  The book's goal is to provide a strong conceptual foundation to enable readers to generalize concepts to new research situations.  Emphasis is placed on the underlying logic and assumptions of the analysis and what it tells the researcher, the limitations of the analysis, and the consequences of violating assumptions.  Sampling, design efficiency, and statistical models are emphasized throughout. As per APA recommendations

  15. Fashion Research at Design Schools

    DEFF Research Database (Denmark)

    Skjold, Else

    2008-01-01

    The report “Fashion Research at Design Schools” (2008), which was commissioned by Institute for Fashion and Textiles at Designskolen Kolding,  appoints the potentials and challenges in relation to the ongoing academization of design schools, with a specific focus on fashion research. The key......, interactionistic interviews (Järvinen and Mik-Meyer, 2005) with key persons from the respective research- and fashion departments from eight selected design schools in Holland, England and USA. The analysis of each case is inspired by Edgar E. Schein’s levels of culture (Schein 1994), that aims to pinpoint both...

  16. FOSS Tools for Research Data Management

    Science.gov (United States)

    Stender, Vivien; Jankowski, Cedric; Hammitzsch, Martin; Wächter, Joachim

    2017-04-01

    Established initiatives and organizations, e.g. the Initiative for Scientific Cyberinfrastructures (NSF, 2007) or the European Strategy Forum on Research Infrastructures (ESFRI, 2008), promote and foster the development of sustainable research infrastructures. These infrastructures aim the provision of services supporting scientists to search, visualize and access data, to collaborate and exchange information, as well as to publish data and other results. In this regard, Research Data Management (RDM) gains importance and thus requires the support by appropriate tools integrated in these infrastructures. Different projects provide arbitrary solutions to manage research data. However, within two projects - SUMARIO for land and water management and TERENO for environmental monitoring - solutions to manage research data have been developed based on Free and Open Source Software (FOSS) components. The resulting framework provides essential components for harvesting, storing and documenting research data, as well as for discovering, visualizing and downloading these data on the basis of standardized services stimulated considerably by enhanced data management approaches of Spatial Data Infrastructures (SDI). In order to fully exploit the potentials of these developments for enhancing data management in Geosciences the publication of software components, e.g. via GitHub, is not sufficient. We will use our experience to move these solutions into the cloud e.g. as PaaS or SaaS offerings. Our contribution will present data management solutions for the Geosciences developed in two projects. A sort of construction kit with FOSS components build the backbone for the assembly and implementation of projects specific platforms. Furthermore, an approach is presented to stimulate the reuse of FOSS RDM solutions with cloud concepts. In further projects specific RDM platforms can be set-up much faster, customized to the individual needs and tools can be added during the run-time.

  17. Short Paper: Design Tools, Hybridization Exploring Intuitive Interaction

    NARCIS (Netherlands)

    Wendrich, Robert E.; Kuhlen, Torsten; Coquillart, Sabine; Interrante, Victoria

    2010-01-01

    Design and Design Engineering is about making abstract representations often based on fuzzy notions, ideas or prerequisite requirements with the use of various design tools. This paper introduces an interactive hybrid design tool to assist and support singular design activity or multiple

  18. Straightforward statistics understanding the tools of research

    CERN Document Server

    Geher, Glenn

    2014-01-01

    Straightforward Statistics: Understanding the Tools of Research is a clear and direct introduction to statistics for the social, behavioral, and life sciences. Based on the author's extensive experience teaching undergraduate statistics, this book provides a narrative presentation of the core principles that provide the foundation for modern-day statistics. With step-by-step guidance on the nuts and bolts of computing these statistics, the book includes detailed tutorials how to use state-of-the-art software, SPSS, to compute the basic statistics employed in modern academic and applied researc

  19. Data Integration Tool: From Permafrost Data Translation Research Tool to A Robust Research Application

    Science.gov (United States)

    Wilcox, H.; Schaefer, K. M.; Jafarov, E. E.; Strawhacker, C.; Pulsifer, P. L.; Thurmes, N.

    2016-12-01

    The United States National Science Foundation funded PermaData project led by the National Snow and Ice Data Center (NSIDC) with a team from the Global Terrestrial Network for Permafrost (GTN-P) aimed to improve permafrost data access and discovery. We developed a Data Integration Tool (DIT) to significantly speed up the time of manual processing needed to translate inconsistent, scattered historical permafrost data into files ready to ingest directly into the GTN-P. We leverage this data to support science research and policy decisions. DIT is a workflow manager that divides data preparation and analysis into a series of steps or operations called widgets. Each widget does a specific operation, such as read, multiply by a constant, sort, plot, and write data. DIT allows the user to select and order the widgets as desired to meet their specific needs. Originally it was written to capture a scientist's personal, iterative, data manipulation and quality control process of visually and programmatically iterating through inconsistent input data, examining it to find problems, adding operations to address the problems, and rerunning until the data could be translated into the GTN-P standard format. Iterative development of this tool led to a Fortran/Python hybrid then, with consideration of users, licensing, version control, packaging, and workflow, to a publically available, robust, usable application. Transitioning to Python allowed the use of open source frameworks for the workflow core and integration with a javascript graphical workflow interface. DIT is targeted to automatically handle 90% of the data processing for field scientists, modelers, and non-discipline scientists. It is available as an open source tool in GitHub packaged for a subset of Mac, Windows, and UNIX systems as a desktop application with a graphical workflow manager. DIT was used to completely translate one dataset (133 sites) that was successfully added to GTN-P, nearly translate three datasets

  20. Fashion Research at Design Schools

    DEFF Research Database (Denmark)

    Skjold, Else

    2008-01-01

    on fashion education and fashion research, that are “taken for granted” in the institutional culture of each case. Because of the diversity between the cases, a cultural-oriented comparison has been made, where every case is perceived as idiographically unique (Thyge Winther-Jensen 2004). Descriptions......The report “Fashion Research at Design Schools” (2008), which was commissioned by Institute for Fashion and Textiles at Designskolen Kolding,  appoints the potentials and challenges in relation to the ongoing academization of design schools, with a specific focus on fashion research. The key...... research question is: “What kind of fashion design education is Designskolen Kolding aiming to offer in the future, what kind of skills will the students need in their future work place, the fashion industry, and can research work as a potential in this process?”   The study is based on qualitative...

  1. Leveraging Failure in Design Research

    Science.gov (United States)

    Lobato, Joanne; Walters, C. David; Hohensee, Charles; Gruver, John; Diamond, Jaime Marie

    2015-01-01

    Even in the resource-rich, more ideal conditions of many design-based classroom interventions, unexpected events can lead to disappointing results in student learning. However, if later iterations in a design research study are more successful, the previous failures can provide opportunities for comparisons to reveal subtle differences in…

  2. Metal Cutting Theory and Friction Stir Welding Tool Design

    Science.gov (United States)

    Payton, Lewis N.

    2003-01-01

    Friction Stir Welding (FSW) is a relatively new industrial process that was invented at The Weld Institute (TWI, United Kingdom) and patented in 1992 under research funded by in part by the National Aeronautics and Space Administration (NASA). Often quoted advantages of the process include good strength and ductility along with minimization of residual stress and distortion. Less well advertised are the beneficial effects of this solid state welding process in the field of occupational and environmental safety. It produces superior weld products in difficult to weld materials without producing any toxic fumes or solid waste that must be controlled as hazardous waste. In fact, it reduces noise pollution in the workspace as well. In the early days of FSW, most welding was performed on modified machine tools, in particular on milling machines with modified milling cutters. In spite of the obvious milling heritage of the process, the techniques and lessons learned from almost 250 years of successful metalworking with milling machines have not been applied in the field of modern Friction Stir Welding. The goal of the current research was to study currently successful FSW tools and parameterize the process in such a way that the design of new tools for new materials could be accelerated. Along the way, several successful new tooling designs were developed for current issues at the Marshall Space Flight Center with accompanying patent disclosures

  3. A Capstone Wiki Knowledge Base: A Case Study of an Online Tool Designed to Promote Life-Long Learning through Engineering Literature Research

    Science.gov (United States)

    Clarke, James B.; Coyle, James R.

    2011-01-01

    This article reports the results of a case study in which an experimental wiki knowledge base was designed, developed, and tested by the Brill Science Library at Miami University for an undergraduate engineering senior capstone project. The wiki knowledge base was created to determine if the science library could enhance the engineering literature…

  4. Improving design processes through structured reflection : a prototype software tool

    OpenAIRE

    Reymen, I.M.M.J.; Melby, E.

    2001-01-01

    A prototype software tool facilitating the use of a design method supporting structured reflection on design processes is presented. The prototype, called Echo, has been developed to explore the benefits of using a software system to facilitate the use of the design method. Both the prototype software tool and the design method are developed as part of the Ph.D. project of Isabelle Reymen. The goal of the design method is supporting designers with reflection on design processes in a systemati...

  5. Basic Research Tools for Earthworm Ecology

    Directory of Open Access Journals (Sweden)

    Kevin R. Butt

    2010-01-01

    Full Text Available Earthworms are responsible for soil development, recycling organic matter and form a vital component within many food webs. For these and other reasons earthworms are worthy of investigation. Many technologically-enhanced approaches have been used within earthworm-focused research. These have their place, may be a development of existing practices or bring techniques from other fields. Nevertheless, let us not overlook the fact that much can still be learned through utilisation of more basic approaches which have been used for some time. New does not always equate to better. Information on community composition within an area and specific population densities can be learned using simple collection techniques, and burrowing behaviour can be determined from pits, resin-insertion or simple mesocosms. Life history studies can be achieved through maintenance of relatively simple cultures. Behavioural observations can be undertaken by direct observation or with low cost webcam usage. Applied aspects of earthworm research can also be achieved through use of simple techniques to enhance population development and even population dynamics can be directly addressed with use of relatively inexpensive, effective marking techniques. This paper seeks to demonstrate that good quality research in this sphere can result from appropriate application of relatively simple research tools.

  6. Basic Research Tools for Earthworm Ecology

    International Nuclear Information System (INIS)

    Butt, K.R.; Grigoropoulou, N.

    2010-01-01

    Earthworms are responsible for soil development, recycling organic matter and form a vital component within many food webs. For these and other reasons earthworms are worthy of investigation. Many technologically-enhanced approaches have been used within earthworm-focused research. These have their place, may be a development of existing practices or bring techniques from other fields. Nevertheless, let us not overlook the fact that much can still be learned through utilisation of more basic approaches which have been used for some time. New does not always equate to better. Information on community composition within an area and specific population densities can be learned using simple collection techniques, and burrowing behaviour can be determined from pits, resin-insertion or simple mesocosms. Life history studies can be achieved through maintenance of relatively simple cultures. Behavioural observations can be undertaken by direct observation or with low cost we became usage. Applied aspects of earthworm research can also be achieved through use of simple techniques to enhance population development and even population dynamics can be directly addressed with use of relatively inexpensive, effective marking techniques. This paper seeks to demonstrate that good quality research in this sphere can result from appropriate application of relatively simple research tools.

  7. Tools for Material Design and Selection

    Science.gov (United States)

    Wehage, Kristopher

    The present thesis focuses on applications of numerical methods to create tools for material characterization, design and selection. The tools generated in this work incorporate a variety of programming concepts, from digital image analysis, geometry, optimization, and parallel programming to data-mining, databases and web design. The first portion of the thesis focuses on methods for characterizing clustering in bimodal 5083 Aluminum alloys created by cryomilling and powder metallurgy. The bimodal samples analyzed in the present work contain a mixture of a coarse grain phase, with a grain size on the order of several microns, and an ultra-fine grain phase, with a grain size on the order of 200 nm. The mixing of the two phases is not homogeneous and clustering is observed. To investigate clustering in these bimodal materials, various microstructures were created experimentally by conventional cryomilling, Hot Isostatic Pressing (HIP), Extrusion, Dual-Mode Dynamic Forging (DMDF) and a new 'Gradient' cryomilling process. Two techniques for quantitative clustering analysis are presented, formulated and implemented. The first technique, the Area Disorder function, provides a metric of the quality of coarse grain dispersion in an ultra-fine grain matrix and the second technique, the Two-Point Correlation function, provides a metric of long and short range spatial arrangements of the two phases, as well as an indication of the mean feature size in any direction. The two techniques are implemented on digital images created by Scanning Electron Microscopy (SEM) and Electron Backscatter Detection (EBSD) of the microstructures. To investigate structure--property relationships through modeling and simulation, strategies for generating synthetic microstructures are discussed and a computer program that generates randomized microstructures with desired configurations of clustering described by the Area Disorder Function is formulated and presented. In the computer program, two

  8. 5th International Conference on Research into Design

    CERN Document Server

    2015-01-01

    This book showcases cutting-edge research papers from the 5th International Conference on Research into Design – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design across boundaries. The special features of the book are the variety of insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the largest collection of research from India. For practitioners and educators, it is exposure to an empirically validated suite of theories, models, methods and tools that can be taught and practiced for design-led innovation.

  9. Design Package for Fuel Retrieval System Fuel Handling Tool Modification

    International Nuclear Information System (INIS)

    TEDESCHI, D.J.

    2000-01-01

    This is a design package that contains the details for a modification to a tool used for moving fuel elements during loading of MCO Fuel Baskets for the Fuel Retrieval System. The tool is called the fuel handling tool (or stinger). This document contains requirements, development design information, tests, and test reports

  10. Design of a Cognitive Tool to Enhance Problemsolving Performance

    Science.gov (United States)

    Lee, Youngmin; Nelson, David

    2005-01-01

    The design of a cognitive tool to support problem-solving performance for external representation of knowledge is described. The limitations of conventional knowledge maps are analyzed in proposing the tool. The design principles and specifications are described. This tool is expected to enhance learners problem-solving performance by allowing…

  11. Preliminary bridge design navigation tool for novices

    OpenAIRE

    Boulanger, Sylvie

    1997-01-01

    The motivation of the thesis comes from the frustrations of young engineers confronted with real design problems. The inspiration of the thesis evolved from observations of bridge designers and analyses of bridge design competitions. Not only do designers adopt more than one strategy during design, they rarely perform a fixed sequence of tasks. Not only do designers consider more than one criterion during design, their priorities shift during the determination of parameters. The choice of tas...

  12. Preliminary bridge design navigation tool for novices

    OpenAIRE

    Boulanger, Sylvie; Hirt, Manfred A.

    2008-01-01

    The motivation of the thesis comes from the frustrations of young engineers confronted with real design problems. The inspiration of the thesis evolved from observations of bridge designers and analyses of bridge design competitions. Not only do designers adopt more than one strategy during design, they rarely perform a fixed sequence of tasks. Not only do designers consider more than one criterion during design, their priorities shift during the determination of parameters. The choice of tas...

  13. Scalable Combinatorial Tools for Health Disparities Research

    Directory of Open Access Journals (Sweden)

    Michael A. Langston

    2014-10-01

    Full Text Available Despite staggering investments made in unraveling the human genome, current estimates suggest that as much as 90% of the variance in cancer and chronic diseases can be attributed to factors outside an individual’s genetic endowment, particularly to environmental exposures experienced across his or her life course. New analytical approaches are clearly required as investigators turn to complicated systems theory and ecological, place-based and life-history perspectives in order to understand more clearly the relationships between social determinants, environmental exposures and health disparities. While traditional data analysis techniques remain foundational to health disparities research, they are easily overwhelmed by the ever-increasing size and heterogeneity of available data needed to illuminate latent gene x environment interactions. This has prompted the adaptation and application of scalable combinatorial methods, many from genome science research, to the study of population health. Most of these powerful tools are algorithmically sophisticated, highly automated and mathematically abstract. Their utility motivates the main theme of this paper, which is to describe real applications of innovative transdisciplinary models and analyses in an effort to help move the research community closer toward identifying the causal mechanisms and associated environmental contexts underlying health disparities. The public health exposome is used as a contemporary focus for addressing the complex nature of this subject.

  14. Potential and limitations of environmental design with LCA tools

    Directory of Open Access Journals (Sweden)

    Alexander Hollberg

    2017-10-01

    Full Text Available The built environment has a very high impact on the environment. Architects can largely define the environmental impact a building will cause throughout its lifetime through its design. Especially the choice of material and the type of construction can be influenced in early design stages. To quantify the environmental impact, tools for Life Cycle Assessment (LCA are used. This paper discusses the results of four case studies of applying four different novel LCA tools in four different academic courses at different universities. The results show that the success of applying LCA tools highly depends on the point of time during the design process and the design strategy the student pursues. If the right tool is used at the right moment and matches the design strategy, it can help to improve the architectural quality and reduce environmental impacts. In most cases however, the time of application did not fit, resulting in additional effort for applying the LCA tool. In consequence, the architectural elaboration of the design and the improvement of environmental performance compete against each other. Either the architectural quality suffers or the tool is employed late and the environmental performance cannot be improved. Even if the point in time of the tool application is right, the success depends highly on the design strategy. The number of tools is growing and there is an adequate tool available for each design stage. The design strategy has to match the tool and this requires a willingness to adapt the design approach. The issue of environmental design shifted from a lack of adequate tools to the lack of adequate design approaches. Tools can be easily taught in seminars. Environmental design strategies, however, have to be included in design studios and developed throughout the entire design phase to become part of architectural education.

  15. Design of a Three-Axis Machine Tool Module

    National Research Council Canada - National Science Library

    Childers, Marshal

    2003-01-01

    This report documents the design improvement process of the components in a tool module for a three-axis machine tool, which occurred during the period of March-April 2002 in support of a critical U.S...

  16. Telerehabilitation: Policy Issues and Research Tools

    Directory of Open Access Journals (Sweden)

    Katherine D. Seelman

    2009-09-01

    Full Text Available The importance of public policy as a complementary framework for telehealth, telemedicine, and by association telerehabilitation, has been recognized by a number of experts. The purpose of this paper is to review literature on telerehabilitation (TR policy and research methodology issues in order to report on the current state of the science and make recommendations about future research needs. An extensive literature search was implemented using search terms grouped into main topics of telerehabilitation, policy, population of users, and policy specific issues such as cost and reimbursement. The availability of rigorous and valid evidence-based cost studies emerged as a major challenge to the field. Existing cost studies provided evidence that telehomecare may be a promising application area for TR. Cost studies also indicated that telepsychiatry is a promising telepractice area. The literature did not reference the International Classification on Functioning, Disability and Health (ICF. Rigorous and comprehensive TR assessment and evaluation tools for outcome studies are tantamount to generating confidence among providers, payers, clinicians and end users. In order to evaluate consumer satisfaction and participation, assessment criteria must include medical, functional and quality of life items such as assistive technology and environmental factors. Keywords: Telerehabilitation, Telehomecare, Telepsychiatry, Telepractice

  17. ARCHITECTURAL FORM CREATION IN THE DESIGN STUDIO: PHYSICAL MODELING AS AN EFFECTIVE DESIGN TOOL

    Directory of Open Access Journals (Sweden)

    Wael Abdelhameed

    2011-11-01

    Full Text Available This research paper attempts to shed more light on an area of the design studio, which concerns with the use of physical modeling as a design medium in architectural form creation. An experiment has been carried out during an architectural design studio in order to not only investigate physical modeling as a tool of form creation but also improve visual design thinking that students employ while using this manual tool. To achieve the research objective, a method was proposed and applied to track form creation processes, based upon three types of operation, namely: sketching transformations, divergent physical-modeling transformations, and convergent physical-modeling transformations. The method helps record the innovative transitions of form during conceptual designing in a simple way. Investigating form creation processes and activities associated with visual design thinking enables the research to conclude to general results of the role of physical modeling in the conceptual phase of designing, and to specific results of the methods used in this architectural design studio experiment.

  18. Aviation Environmental Design Tool (AEDT) System Architecture

    Science.gov (United States)

    2007-01-29

    The Federal Aviation Administration's Office of Environment and Energy (FAA-AEE) is : developing a comprehensive suite of software tools that will allow for thorough assessment of the environmental effects of aviation. The main goal of the effort is ...

  19. Crowdsourcing user and design research

    NARCIS (Netherlands)

    Khan, J.V.; Dhillon, G.S.; Piso, M.C.; Schelle, K.J.; Markopoulos, P.; Martens, J.B.; Malins, J.; Coninx, K.; Liapis, A.

    2016-01-01

    Crowdsourcing can be defined as a task, which is usually performed by an employee, that is given out as an open call to a crowd of users to be completed. Although crowdsourcing has been growing in recent years, its application to design research and education has only scratched the surface of its

  20. The use of web2 tools in action research

    DEFF Research Database (Denmark)

    Kolbæk, Raymond; Steensgaard, Randi; Angel, Sanne

    2017-01-01

    . Furthermore we try to evidence-based the concept of "Sample handlings" and examines whether this concept can be used as a flexible methodological tool for developing workflow that promotes patient participation in their own rehabilitation. We use a action research design to identify actual problems, develop......, to test, evaluate and implement specific actions to promote patient participation in rehabilitation. Four nurses and four social and health assistants is having a "co-researcher" active role. The interaction with the researchers creates a reflexive and dynamic process with a learning and competence......Abstract Content: Major challenges occurs, when trying to implement research in clinical practice. In the West Danish Center for Spinal Cord Injury, we are doing a practice-based ph.d. project, that involves the practice field's own members as co-researchers. In the management of the project we use...

  1. Design Tool for 5-20 MW Direct Drive Generators

    DEFF Research Database (Denmark)

    Leban, Krisztina Monika; Ritchie, Ewen; Argeseanu, Alin

    2014-01-01

    This paper reports on a machine design tool for large (5-10MW) direct drive electrical generator. The aim of the work is to construct a flexible calculation tool that enables the analysis of different ideas and concepts for generator design. The tool is intended for engineers that are involved...... in the design of wind turbine systems. The design tool comprises calculation modules that are kept as independent as possible from each other so that new machine geometries and types can be modelled by reusing, recombining and modifying the different modules. Choice of the most suitable candidates...

  2. Safety design for machine tools and installation

    International Nuclear Information System (INIS)

    Lee, Myung Jae; Lee, Jong Hyung

    1986-01-01

    Recently, there occur many damages and disasters due to mistakes in designing, and the author has attempted measures for effective prevention of damages. For this purpose, the author collected the theses on accidents due to poor designs and their measures. Many accidents are blamed for their poor designs as their causes. The way to prevent mistakes in designing is to keep in file the cases of such accidents for a system to be ready for use whenever needed. (Author)

  3. Quantitative and creative design tools for urban design in cold and windy climates

    DEFF Research Database (Denmark)

    Koss, Holger; Jensen, Lotte Bjerregaard; Nielsen, Thomas Alexander Sick

    2014-01-01

    between the design processes and the academic knowledge available is a focus area. The effects of climate change and a general higher demand for quantitative assessment of urban planning proposals in hard climatic locations have created a demand for research based design advice. The paper will present......In cold and windy climates, the quality of the urban spaces is severely challenged. A design process with a very high level of information regarding wind, sun, daylight and water from the earliest of the design process will help create the most optimized design. For the last couple of years...... in academic ‘silos’ where little attention has been made in regards to architectural design processes. Simulation tools were developed that can render a larger amount of information available in a short time and thus can keep pace with an ongoing design process in an architectural studio. Bridging the gap...

  4. Designing Effective Undergraduate Research Experiences

    Science.gov (United States)

    Severson, S.

    2010-12-01

    I present a model for designing student research internships that is informed by the best practices of the Center for Adaptive Optics (CfAO) Professional Development Program. The dual strands of the CfAO education program include: the preparation of early-career scientists and engineers in effective teaching; and changing the learning experiences of students (e.g., undergraduate interns) through inquiry-based "teaching laboratories." This paper will focus on the carry-over of these ideas into the design of laboratory research internships such as the CfAO Mainland internship program as well as NSF REU (Research Experiences for Undergraduates) and senior-thesis or "capstone" research programs. Key ideas in maximizing student learning outcomes and generating productive research during internships include: defining explicit content, scientific process, and attitudinal goals for the project; assessment of student prior knowledge and experience, then following up with formative assessment throughout the project; setting reasonable goals with timetables and addressing motivation; and giving students ownership of the research by implementing aspects of the inquiry process within the internship.

  5. Design tool for offshore wind farm cluster planning

    DEFF Research Database (Denmark)

    Hasager, Charlotte Bay; Madsen, Peter Hauge; Giebel, Gregor

    2015-01-01

    In the framework of the FP7 project EERA DTOC: Design Tool for Offshore wind farm Cluster, a new software supporting the planning of offshore wind farms was developed, based on state-of-the-art approaches from large scale wind potential to economic benchmarking. The model portfolio includes WAs......P, FUGA, WRF, Net-Op, LCoE model, CorWind, FarmFlow, EeFarm and grid code compliance calculations. The development is done by members from European Energy Research Alliance (EERA) and guided by several industrial partners. A commercial spin-off from the project is the tool ‘Wind & Economy’. The software...... by the software and several tests were performed. The calculations include the smoothing effect on produced energy between wind farms located in different regional wind zones and the short time scales relevant for assessing balancing power. The grid code compliance was tested for several cases and the results...

  6. VAO Tools Enhance CANDELS Research Productivity

    Science.gov (United States)

    Greene, Gretchen; Donley, J.; Rodney, S.; LAZIO, J.; Koekemoer, A. M.; Busko, I.; Hanisch, R. J.; VAO Team; CANDELS Team

    2013-01-01

    The formation of galaxies and their co-evolution with black holes through cosmic time are prominent areas in current extragalactic astronomy. New methods in science research are building upon collaborations between scientists and archive data centers which span large volumes of multi-wavelength and heterogeneous data. A successful example of this form of teamwork is demonstrated by the CANDELS (Cosmic Assembly Near-infrared Deep Extragalactic Legacy Survey) and the Virtual Astronomical Observatory (VAO) collaboration. The CANDELS project archive data provider services are registered and discoverable in the VAO through an innovative web based Data Discovery Tool, providing a drill down capability and cross-referencing with other co-spatially located astronomical catalogs, images and spectra. The CANDELS team is working together with the VAO to define new methods for analyzing Spectral Energy Distributions of galaxies containing active galactic nuclei, and helping to evolve advanced catalog matching methods for exploring images of variable depths, wavelengths and resolution. Through the publication of VOEvents, the CANDELS project is publishing data streams for newly discovered supernovae that are bright enough to be followed from the ground.

  7. Synthetic RNAs for Gene Regulation: Design Principles and Computational Tools

    International Nuclear Information System (INIS)

    Laganà, Alessandro; Shasha, Dennis; Croce, Carlo Maria

    2014-01-01

    The use of synthetic non-coding RNAs for post-transcriptional regulation of gene expression has not only become a standard laboratory tool for gene functional studies but it has also opened up new perspectives in the design of new and potentially promising therapeutic strategies. Bioinformatics has provided researchers with a variety of tools for the design, the analysis, and the evaluation of RNAi agents such as small-interfering RNA (siRNA), short-hairpin RNA (shRNA), artificial microRNA (a-miR), and microRNA sponges. More recently, a new system for genome engineering based on the bacterial CRISPR-Cas9 system (Clustered Regularly Interspaced Short Palindromic Repeats), was shown to have the potential to also regulate gene expression at both transcriptional and post-transcriptional level in a more specific way. In this mini review, we present RNAi and CRISPRi design principles and discuss the advantages and limitations of the current design approaches.

  8. Synthetic RNAs for Gene Regulation: Design Principles and Computational Tools

    Energy Technology Data Exchange (ETDEWEB)

    Laganà, Alessandro [Department of Molecular Virology, Immunology and Medical Genetics, Comprehensive Cancer Center, The Ohio State University, Columbus, OH (United States); Shasha, Dennis [Courant Institute of Mathematical Sciences, New York University, New York, NY (United States); Croce, Carlo Maria [Department of Molecular Virology, Immunology and Medical Genetics, Comprehensive Cancer Center, The Ohio State University, Columbus, OH (United States)

    2014-12-11

    The use of synthetic non-coding RNAs for post-transcriptional regulation of gene expression has not only become a standard laboratory tool for gene functional studies but it has also opened up new perspectives in the design of new and potentially promising therapeutic strategies. Bioinformatics has provided researchers with a variety of tools for the design, the analysis, and the evaluation of RNAi agents such as small-interfering RNA (siRNA), short-hairpin RNA (shRNA), artificial microRNA (a-miR), and microRNA sponges. More recently, a new system for genome engineering based on the bacterial CRISPR-Cas9 system (Clustered Regularly Interspaced Short Palindromic Repeats), was shown to have the potential to also regulate gene expression at both transcriptional and post-transcriptional level in a more specific way. In this mini review, we present RNAi and CRISPRi design principles and discuss the advantages and limitations of the current design approaches.

  9. Notebooks as didactic tool in design education

    NARCIS (Netherlands)

    Van den Toorn, M.W.M.; Have, R.

    2012-01-01

    Notebooks are an important didactic tool both for students and teaching staff. The idea of notebooks is that the daily work and thinking is reflected in notes, drawings, sketches, diagrams. Keeping track of the content of daily work can give an idea of the evolution and development of ideas.

  10. Designing a Tool for History Textbook Analysis

    Directory of Open Access Journals (Sweden)

    Katalin Eszter Morgan

    2012-11-01

    Full Text Available This article describes the process by which a five-dimensional tool for history textbook analysis was conceptualized and developed in three stages. The first stage consisted of a grounded theory approach to code the content of the sampled chapters of the books inductively. After that the findings from this coding process were combined with principles of text analysis as derived from the literature, specifically focusing on the notion of semiotic mediation as theorized by Lev VYGOTSKY. We explain how we then entered the third stage of the development of the tool, comprising five dimensions. Towards the end of the article we show how the tool could be adapted to serve other disciplines as well. The argument we forward in the article is for systematic and well theorized tools with which to investigate textbooks as semiotic mediators in education. By implication, textbook authors can also use these as guidelines. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs130170

  11. Designing a Pediatric Severe Sepsis Screening Tool

    Directory of Open Access Journals (Sweden)

    Robert eSepanski

    2014-06-01

    Full Text Available We sought to create a screening tool with improved predictive value for pediatric severe sepsis and septic shock that can be incorporated into the electronic medical record and actively screen all patients arriving at a pediatric Emergency Department (ED. Gold standard severe sepsis cases were identified using a combination of coded discharge diagnosis and physician chart review from 7,402 children who visited a pediatric ED over two months. The tool’s identification of severe sepsis was initially based on International Consensus Conference on Pediatric Sepsis (ICCPS parameters that were refined by an iterative, virtual process that allowed us to propose successive changes in sepsis detection parameters in order to optimize the tool’s predictive value based on receiver operating curve (ROC characteristics. Age-specific normal and abnormal values for heart rate (HR and respiratory rate (RR were empirically derived from 143,603 children seen in a second pediatric ED over three years. Univariate analyses were performed for each measure in the tool to assess its association with severe sepsis and to characterize it as an early or late indicator of severe sepsis. A split-sample was used to validate the final, optimized tool. The final tool incorporated age-specific thresholds for abnormal HR and RR and employed a linear temperature correction for each category. The final tool’s positive predictive value was 48.7%, a significant, nearly three-fold improvement over the original ICCPS tool. False positive Systemic Inflammatory Response Syndrome (SIRS identifications were nearly six-fold lower.

  12. Design Tools for Reconfigurable Hardware in Orbit (RHinO)

    Science.gov (United States)

    French, Mathew; Graham, Paul; Wirthlin, Michael; Larchev, Gregory; Bellows, Peter; Schott, Brian

    2004-01-01

    The Reconfigurable Hardware in Orbit (RHinO) project is focused on creating a set of design tools that facilitate and automate design techniques for reconfigurable computing in space, using SRAM-based field-programmable-gate-array (FPGA) technology. These tools leverage an established FPGA design environment and focus primarily on space effects mitigation and power optimization. The project is creating software to automatically test and evaluate the single-event-upsets (SEUs) sensitivities of an FPGA design and insert mitigation techniques. Extensions into the tool suite will also allow evolvable algorithm techniques to reconfigure around single-event-latchup (SEL) events. In the power domain, tools are being created for dynamic power visualiization and optimization. Thus, this technology seeks to enable the use of Reconfigurable Hardware in Orbit, via an integrated design tool-suite aiming to reduce risk, cost, and design time of multimission reconfigurable space processors using SRAM-based FPGAs.

  13. Regression analysis as a design optimization tool

    Science.gov (United States)

    Perley, R.

    1984-01-01

    The optimization concepts are described in relation to an overall design process as opposed to a detailed, part-design process where the requirements are firmly stated, the optimization criteria are well established, and a design is known to be feasible. The overall design process starts with the stated requirements. Some of the design criteria are derived directly from the requirements, but others are affected by the design concept. It is these design criteria that define the performance index, or objective function, that is to be minimized within some constraints. In general, there will be multiple objectives, some mutually exclusive, with no clear statement of their relative importance. The optimization loop that is given adjusts the design variables and analyzes the resulting design, in an iterative fashion, until the objective function is minimized within the constraints. This provides a solution, but it is only the beginning. In effect, the problem definition evolves as information is derived from the results. It becomes a learning process as we determine what the physics of the system can deliver in relation to the desirable system characteristics. As with any learning process, an interactive capability is a real attriubute for investigating the many alternatives that will be suggested as learning progresses.

  14. Program Design Report of the CNC Machine Tool(II)

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H

    2007-06-15

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology.

  15. Program Design Report of the CNC Machine Tool(II)

    International Nuclear Information System (INIS)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H.

    2007-06-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  16. Program Design Report of the CNC Machine Tool(III)

    International Nuclear Information System (INIS)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H.

    2008-08-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  17. Program Design Report of the CNC Machine Tool(IV)

    International Nuclear Information System (INIS)

    Youm, Ki Un; Lee, I. B.; Youm, J. H.

    2009-09-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  18. Program Design Report of the CNC Machine Tool (I)

    International Nuclear Information System (INIS)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.

    2006-08-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  19. QFD: a methodological tool for integration of ergonomics at the design stage.

    Science.gov (United States)

    Marsot, Jacques

    2005-03-01

    As a marked increase in the number of musculoskeletal disorders was noted in many industrialized countries and more specifically in companies that require the use of hand tools, the French National Research and Safety Institute launched in 1999 a research program on the topic of integrating ergonomics into hand tool design. After a brief review of the problems of integrating ergonomics at the design stage, the paper shows how the "Quality Function Deployment" method has been applied to the design of a boning knife and it highlights the difficulties encountered. Then, it demonstrates how this method can be a methodological tool geared to greater ergonomics consideration in product design.

  20. Bioinformatic tools for PCR Primer design

    African Journals Online (AJOL)

    ES

    reaction (PCR), oligo hybridization and DNA sequencing. Proper primer design is actually one of the most important factors/steps in successful DNA sequencing. Various bioinformatics programs are available for selection of primer pairs from a template sequence. The plethora programs for PCR primer design reflects the.

  1. Engineer's Notebook--A Design Assessment Tool

    Science.gov (United States)

    Kelley, Todd R.

    2011-01-01

    As technology education continues to consider a move toward an engineering design focus as proposed by various leaders in technology education, it will be necessary to employ new pedagogical approaches. Hill (2006) provided some new perspectives regarding pedagogical approaches for technology education with an engineering design focus. One…

  2. Gradually including potential users: A tool to counter design exclusions.

    Science.gov (United States)

    Zitkus, Emilene; Langdon, Patrick; Clarkson, P John

    2018-01-01

    The paper describes an iterative development process used to understand the suitability of different inclusive design evaluation tools applied into design practices. At the end of this process, a tool named Inclusive Design Advisor was developed, combining data related to design features of small appliances with ergonomic task demands, anthropometric data and exclusion data. When auditing a new design the tool examines the exclusion that each design feature can cause, followed by objective recommendations directly related to its features. Interactively, it allows designers or clients to balance design changes with the exclusion caused. It presents the type of information that enables designers and clients to discuss user needs and make more inclusive design decisions. Copyright © 2017. Published by Elsevier Ltd.

  3. Design tools for complex dynamic security systems.

    Energy Technology Data Exchange (ETDEWEB)

    Byrne, Raymond Harry; Rigdon, James Brian; Rohrer, Brandon Robinson; Laguna, Glenn A.; Robinett, Rush D. III (.; ); Groom, Kenneth Neal; Wilson, David Gerald; Bickerstaff, Robert J.; Harrington, John J.

    2007-01-01

    The development of tools for complex dynamic security systems is not a straight forward engineering task but, rather, a scientific task where discovery of new scientific principles and math is necessary. For years, scientists have observed complex behavior but have had difficulty understanding it. Prominent examples include: insect colony organization, the stock market, molecular interactions, fractals, and emergent behavior. Engineering such systems will be an even greater challenge. This report explores four tools for engineered complex dynamic security systems: Partially Observable Markov Decision Process, Percolation Theory, Graph Theory, and Exergy/Entropy Theory. Additionally, enabling hardware technology for next generation security systems are described: a 100 node wireless sensor network, unmanned ground vehicle and unmanned aerial vehicle.

  4. Gear cutting tools fundamentals of design and computation

    CERN Document Server

    Radzevich, Stephen P

    2010-01-01

    Presents the DG/K-based method of surface generation, a novel and practical mathematical method for designing gear cutting tools with optimal parameters. This book proposes a scientific classification for the various kinds of the gear machining meshes, discussing optimal designs of gear cutting tools.

  5. Comfort in using hand tools : theory, design and evaluation

    OpenAIRE

    Kuijt-Evers, L.F.M.

    2007-01-01

    Everyone uses hand tools in their daily life, like knife and fork. Moreover, many people use hand tools in their profession as well as during leisure time. It is important that they can work with hand tools that provide comfort. Until now, the avoidance of discomfort was emphasized during the design process of hand tools, like screwdrivers, hand saws and paint brushes. In the near future, the focus will shift towards providing comfort. However, some questions need to be answered to make this ...

  6. Design and development of progressive tool for manufacturing washer

    Science.gov (United States)

    Annigeri, Ulhas K.; Raghavendra Ravi Kiran, K.; Deepthi, Y. P.

    2017-07-01

    In a progressive tool the raw material is worked at different station to finally fabricate the component. A progressive tool is a lucrative tool for mass production of components. A lot of automobile and other transport industries develop progressive tool for the production of components. The design of tool involves lot of planning and the same amount of skill of process planning is required in the fabrication of the tool. The design also involves use of thumb rules and standard elements as per experience gained in practice. Manufacturing the press tool is a laborious task as special jigs and fixtures have to be designed for the purpose. Assembly of all the press tool elements is another task where use of accurate measuring instruments for alignment of various tool elements is important. In the present study, design and fabrication of progressive press tool for production of washer has been developed and the press tool has been tried out on a mechanical type of press. The components produced are to dimensions.

  7. SSME Investment in Turbomachinery Inducer Impeller Design Tools and Methodology

    Science.gov (United States)

    Zoladz, Thomas; Mitchell, William; Lunde, Kevin

    2010-01-01

    Within the rocket engine industry, SSME turbomachines are the de facto standards of success with regard to meeting aggressive performance requirements under challenging operational environments. Over the Shuttle era, SSME has invested heavily in our national inducer impeller design infrastructure. While both low and high pressure turbopump failures/anomaly resolution efforts spurred some of these investments, the SSME program was a major benefactor of key areas of turbomachinery inducer-impeller research outside of flight manifest pressures. Over the past several decades, key turbopump internal environments have been interrogated via highly instrumented hot-fire and cold-flow testing. Likewise, SSME has sponsored the advancement of time accurate and cavitating inducer impeller computation fluid dynamics (CFD) tools. These investments together have led to a better understanding of the complex internal flow fields within aggressive high performing inducers and impellers. New design tools and methodologies have evolved which intend to provide confident blade designs which strike an appropriate balance between performance and self induced load management.

  8. A Framework for the Application of Robust Design Methods and Tools

    DEFF Research Database (Denmark)

    Göhler, Simon Moritz; Howard, Thomas J.

    2014-01-01

    can deliver are not always clear. Expectations to the output are sometimes misleading and imply the incorrect utilization of tools. A categorization of tools, methods and techniques typically associated with robust design methodology in the literature is provided in this paper in terms of purpose...... and deliverables of the individual tool or method. The majority of tools aims for optimizing an existing design solution or give an indication of how robust a design is, which requires a somewhat settled design. Furthermore, the categorization presented in this paper shows a lack in the methodology for tools...... of the existing tools. When to apply, what tool or method, for which purpose can be concluded. The paper also contributes with a framework for researchers to derive a generic landscape or database for RDM build upon the main premises and deliverables of each method....

  9. Radiation Mitigation and Power Optimization Design Tools for Reconfigurable Hardware in Orbit

    Science.gov (United States)

    French, Matthew; Graham, Paul; Wirthlin, Michael; Wang, Li; Larchev, Gregory

    2005-01-01

    The Reconfigurable Hardware in Orbit (RHinO)project is focused on creating a set of design tools that facilitate and automate design techniques for reconfigurable computing in space, using SRAM-based field-programmable-gate-array (FPGA) technology. In the second year of the project, design tools that leverage an established FPGA design environment have been created to visualize and analyze an FPGA circuit for radiation weaknesses and power inefficiencies. For radiation, a single event Upset (SEU) emulator, persistence analysis tool, and a half-latch removal tool for Xilinx/Virtex-II devices have been created. Research is underway on a persistence mitigation tool and multiple bit upsets (MBU) studies. For power, synthesis level dynamic power visualization and analysis tools have been completed. Power optimization tools are under development and preliminary test results are positive.

  10. Representation stigma: Perceptions of tools and processes for design graphics

    Directory of Open Access Journals (Sweden)

    David Barbarash

    2016-12-01

    Full Text Available Practicing designers and design students across multiple fields were surveyed to measure preference and perception of traditional hand and digital tools to determine if common biases for an individual toolset are realized in practice. Significant results were found, primarily with age being a determinant in preference of graphic tools and processes; this finding demonstrates a hard line between generations of designers. Results show that while there are strong opinions in tools and processes, the realities of modern business practice and production gravitate towards digital methods despite a traditional tool preference in more experienced designers. While negative stigmas regarding computers remain, younger generations are more accepting of digital tools and images, which should eventually lead to a paradigm shift in design professions.

  11. META-X Design Flow Tools

    Science.gov (United States)

    2013-04-01

    Forces can be computed at specific angular positions, and geometrical parameters can be evaluated. Much higher resolution models are required, along...composition engines (C#, C++, Python, Java ) Desert operates on the CyPhy model, converting from a design space alternative structure to a set of design...consists of scripts to execute dymola, post-processing of results to create metrics, and general management of the job sequence. An earlier version created

  12. Analysis of design tool attributes with regards to sustainability benefits

    Science.gov (United States)

    Zain, S.; Ismail, A. F.; Ahmad, Z.; Adesta, E. Y. T.

    2018-01-01

    The trend of global manufacturing competitiveness has shown a significant shift from profit and customer driven business to a more harmonious sustainability paradigm. This new direction, which emphasises the interests of three pillars of sustainability, i.e., social, economic and environment dimensions, has changed the ways products are designed. As a result, the roles of design tools in the product development stage of manufacturing in adapting to the new strategy are vital and increasingly challenging. The aim of this paper is to review the literature on the attributes of design tools with regards to the sustainability perspective. Four well-established design tools are selected, namely Quality Function Deployment (QFD), Failure Mode and Element Analysis (FMEA), Design for Six Sigma (DFSS) and Design for Environment (DfE). By analysing previous studies, the main attributes of each design tool and its benefits with respect to each sustainability dimension throughout four stages of product lifecycle are discussed. From this study, it is learnt that each of the design tools contributes to the three pillars of sustainability either directly or indirectly, but they are unbalanced and not holistic. Therefore, the prospective of improving and optimising the design tools is projected, and the possibility of collaboration between the different tools is discussed.

  13. Design principles of metal-cutting machine tools

    CERN Document Server

    Koenigsberger, F

    1964-01-01

    Design Principles of Metal-Cutting Machine Tools discusses the fundamentals aspects of machine tool design. The book covers the design consideration of metal-cutting machine, such as static and dynamic stiffness, operational speeds, gearboxes, manual, and automatic control. The text first details the data calculation and the general requirements of the machine tool. Next, the book discusses the design principles, which include stiffness and rigidity of the separate constructional elements and their combined behavior under load, as well as electrical, mechanical, and hydraulic drives for the op

  14. Decision support tools in conservation: a workshop to improve user-centred design

    Directory of Open Access Journals (Sweden)

    David Rose

    2017-09-01

    Full Text Available A workshop held at the University of Cambridge in May 2017 brought developers, researchers, knowledge brokers, and users together to discuss user-centred design of decision support tools. Decision support tools are designed to take users through logical decision steps towards an evidence-informed final decision. Although they may exist in different forms, including on paper, decision support tools are generally considered to be computer- (online, software or app-based. Studies have illustrated the potential value of decision support tools for conservation, and there are several papers describing the design of individual tools. Rather less attention, however, has been placed on the desirable characteristics for use, and even less on whether tools are actually being used in practice. This is concerning because if tools are not used by their intended end user, for example a policy-maker or practitioner, then its design will have wasted resources. Based on an analysis of papers on tool use in conservation, there is a lack of social science research on improving design, and relatively few examples where users have been incorporated into the design process. Evidence from other disciplines, particularly human-computer interaction research, illustrates that involving users throughout the design of decision support tools increases the relevance, usability, and impact of systems. User-centred design of tools is, however, seldom mentioned in the conservation literature. The workshop started the necessary process of bringing together developers and users to share knowledge about how to conduct good user-centred design of decision support tools. This will help to ensure that tools are usable and make an impact in conservation policy and practice.

  15. Reflection: Research by Design: Design-Based Research and the Higher Degree Research Student

    Science.gov (United States)

    Kennedy-Clark, Shannon

    2015-01-01

    The article "Research by design: Design-based research and the higher degree research student" (Kennedy-Clark, 2013) appeared in the "Journal of Learning Design" Volume 6, Issue 2 in 2013. Two years on, Shannon Kennedy-Clark reflects upon her original article. Upon being asked to revisit this article the author reflected upon…

  16. CSP Design Model and Tool Support

    NARCIS (Netherlands)

    Volkerink, H.J.; Volkerink, H.J.; Hilderink, G.H.; Broenink, Johannes F.; Vervoort, Wiek; Welch, P.H.; Bakkers, André

    The CSP paradigm is known as a powerful concept for designing and analysing the architectural and behavioural parts of concurrent software. Although the theory of CSP is useful for mathematicians, the programming language occam has been derived from CSP that is useful for any engineering practice.

  17. Computing tools for accelerator design calculations

    International Nuclear Information System (INIS)

    Fischler, M.; Nash, T.

    1984-01-01

    This note is intended as a brief, summary guide for accelerator designers to the new generation of commercial and special processors that allow great increases in computing cost effectiveness. New thinking is required to take best advantage of these computing opportunities, in particular, when moving from analytical approaches to tracking simulations. In this paper, we outline the relevant considerations

  18. Practicing universal design to actual hand tool design process.

    Science.gov (United States)

    Lin, Kai-Chieh; Wu, Chih-Fu

    2015-09-01

    UD evaluation principles are difficult to implement in product design. This study proposes a methodology for implementing UD in the design process through user participation. The original UD principles and user experience are used to develop the evaluation items. Difference of product types was considered. Factor analysis and Quantification theory type I were used to eliminate considered inappropriate evaluation items and to examine the relationship between evaluation items and product design factors. Product design specifications were established for verification. The results showed that converting user evaluation into crucial design verification factors by the generalized evaluation scale based on product attributes as well as the design factors applications in product design can improve users' UD evaluation. The design process of this study is expected to contribute to user-centered UD application. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  19. Symbolics in control design: prospects and research issues

    DEFF Research Database (Denmark)

    Christensen, Anders

    1994-01-01

    The symbolic processor is targeted as a novel basic service in computer aided control system design. Basic symbolic tools are exemplified. A design process model is formulated for control design, with subsets manipulator, tools, target and goals. It is argued, that symbolic processing will give...... substantial contributions to future design environments, as it provides flexibility of representation not possible with traditional numerics. Based on the design process, views on research issues in the incorporation of symbolic processing into traditional numerical design environments are given...

  20. Genephony: a knowledge management tool for genome-wide research

    Directory of Open Access Journals (Sweden)

    Riva Alberto

    2009-09-01

    Full Text Available Abstract Background One of the consequences of the rapid and widespread adoption of high-throughput experimental technologies is an exponential increase of the amount of data produced by genome-wide experiments. Researchers increasingly need to handle very large volumes of heterogeneous data, including both the data generated by their own experiments and the data retrieved from publicly available repositories of genomic knowledge. Integration, exploration, manipulation and interpretation of data and information therefore need to become as automated as possible, since their scale and breadth are, in general, beyond the limits of what individual researchers and the basic data management tools in normal use can handle. This paper describes Genephony, a tool we are developing to address these challenges. Results We describe how Genephony can be used to manage large datesets of genomic information, integrating them with existing knowledge repositories. We illustrate its functionalities with an example of a complex annotation task, in which a set of SNPs coming from a genotyping experiment is annotated with genes known to be associated to a phenotype of interest. We show how, thanks to the modular architecture of Genephony and its user-friendly interface, this task can be performed in a few simple steps. Conclusion Genephony is an online tool for the manipulation of large datasets of genomic information. It can be used as a browser for genomic data, as a high-throughput annotation tool, and as a knowledge discovery tool. It is designed to be easy to use, flexible and extensible. Its knowledge management engine provides fine-grained control over individual data elements, as well as efficient operations on large datasets.

  1. 20% Research & Design Science Project

    Science.gov (United States)

    Spear, Beth A.

    2015-04-01

    A project allowing employees to use 15 % of their time on independent projects was established at 3M in the 1950's. The result of this project included products like post it notes and masking tape. Google allows its employees to use 20% of their time on independently pursued projects. The company values creativity and innovation. Employees are allowed to explore projects of interest to them one day out of the week, 20 % of their work week. Products like AdSense, Gmail, Google Transit, Google News, and Google Talk are the result of this 20 % program. My school is implementing the Next Generation Science Standards (NGSS) as part of our regularly scheduled curriculum review. These new standards focus on the process of learning by doing and designing. The NGSS are very hands on and active. The new standards emphasize learning how to define, understand and solve problems in science and technology. In today's society everyone needs to be familiar with science and technology. This project allows students to develop and practice skills to help them be more comfortable and confident with science and technology while exploring something of interest to them. This project includes three major parts: research, design, and presentation. Students will spend approximately 2-4 weeks defining a project proposal and educating themselves by researching a science and technology topic that is of interest to them. In the next phase, 2-4 weeks, students design a product or plan to collect data for something related to their topic. The time spent on research and design will be dependant on the topic students select. Projects should be ambitious enough to encompass about six weeks. Lastly a presentation or demonstration incorporating the research and design of the project is created, peer reviewed and presented to the class. There are some problems anticipated or already experienced with this project. It is difficult for all students to choose a unique topic when you have large class sizes

  2. Designing the Microbial Research Commons

    Energy Technology Data Exchange (ETDEWEB)

    Uhlir, Paul F. [Board on Research Data and Information Policy and Global Affairs, Washington, DC (United States)

    2011-10-01

    Recent decades have witnessed an ever-increasing range and volume of digital data. All elements of the pillars of science--whether observation, experiment, or theory and modeling--are being transformed by the continuous cycle of generation, dissemination, and use of factual information. This is even more so in terms of the re-using and re-purposing of digital scientific data beyond the original intent of the data collectors, often with dramatic results. We all know about the potential benefits and impacts of digital data, but we are also aware of the barriers, the challenges in maximizing the access, and use of such data. There is thus a need to think about how a data infrastructure can enhance capabilities for finding, using, and integrating information to accelerate discovery and innovation. How can we best implement an accessible, interoperable digital environment so that the data can be repeatedly used by a wide variety of users in different settings and with different applications? With this objective: to use the microbial communities and microbial data, literature, and the research materials themselves as a test case, the Board on Research Data and Information held an International Symposium on Designing the Microbial Research Commons at the National Academy of Sciences in Washington, DC on 8-9 October 2009. The symposium addressed topics such as models to lower the transaction costs and support access to and use of microbiological materials and digital resources from the perspective of publicly funded research, public-private interactions, and developing country concerns. The overall goal of the symposium was to stimulate more research and implementation of improved legal and institutional models for publicly funded research in microbiology.

  3. Streamlining Research by Using Existing Tools

    OpenAIRE

    Greene, Sarah M.; Baldwin, Laura-Mae; Dolor, Rowena J.; Thompson, Ella; Neale, Anne Victoria

    2011-01-01

    Over the past two decades, the health research enterprise has matured rapidly, and many recognize an urgent need to translate pertinent research results into practice, to help improve the quality, accessibility, and affordability of U.S. health care. Streamlining research operations would speed translation, particularly for multi-site collaborations. However, the culture of research discourages reusing or adapting existing resources or study materials. Too often, researchers start studies and...

  4. Forum Theater’s potential as a Research Tool

    Directory of Open Access Journals (Sweden)

    Andrea Calsamiglia Madurga

    2016-03-01

    Full Text Available We present a theoretical and epistemological reflection on Forum Theater’s potential as a Research Tool. Our presence on social action and research has led us to a double reflection on qualitative research’s limitations on the affect studies and the Forum Theater’s potential as a research tool to tackle research about affects. After some specific experiences in action research (qualitative research on romantic love and gender violence, and the creation process of the Forum Theater “Is it a joke?”, we explore Forum Theatre’s possibilities as a research tool in the feminist epistemology framework.

  5. Designing Cyberbullying Prevention and Mitigation Tools

    Science.gov (United States)

    Ashktorab, Zahra

    2017-01-01

    While cyberbullying is prevalent among adolescents, attempts by researchers to evaluate mechanisms for its prevention and mitigation have been largely non-existent. In this dissertation, I argue that the complex nature of cyberbullying, made more challenging by the affordances of diverse social media, cannot be solved through strictly algorithmic…

  6. Market research companies and new product development tools

    NARCIS (Netherlands)

    Nijssen, E.J.; Frambach, R.T.

    1998-01-01

    This research investigates (1) the share of new product development (NPD) research services in market research (MR) companies’ turnover, (2) MR companies’ awareness and use of NPD tools and the modifications made to these NPD tools, and (3) MR company managers’ perceptions of the influence of client

  7. Market research companies and new product development tools

    NARCIS (Netherlands)

    Nijssen, Edwin J.; Frambach, Ruud T.

    1998-01-01

    This research investigates (1) the share of new product development (NPD) research services in market research (MR) companies' turnover, (2) MR companies' awareness and use of NPD tools and the modifications made to these NPD tools, and (3) MR company managers' perceptions of the influence of client

  8. Tools for Ephemeral Gully Erosion Process Research

    Science.gov (United States)

    Techniques to quantify ephemeral gully erosion have been identified by USDA Natural Resources Conservation Service (NRCS) as one of gaps in current erosion assessment tools. One reason that may have contributed to this technology gap is the difficulty to quantify changes in channel geometry to asses...

  9. Evaluating research impact: the development of a ‘RESEARCH for IMPACT’ TOOL

    Directory of Open Access Journals (Sweden)

    Komla Tsey

    2016-08-01

    Full Text Available Introduction: This paper describes the development of a ‘Research for Impact’ Tool against a background of concerns about the over-researching of Aboriginal and Torres Strait Islander people’s issues without demonstrable benefits.Material and Methods: A combination of literature reviews, workshops with researchers and reflections by project team members and partners using participatory snowball techniques.Results: Assessing research impact is difficult, akin to so-called ‘wicked problem’, but not impossible. Heuristic and collaborative approach to research that takes in the expectations of research users, those being researched and the funders of research offers a pragmatic solution to evaluating research impact. The proposed ‘Research for Impact’ Tool is based on the understanding that the value of research is to create evidence and/or products to support smarter decisions so as to improve the human condition.Research is of limited value unless the evidence produced is used to inform smarter decisions. A practical way of approaching research impact is therefore to start with the decisions confronting decision makers whether they are government policymakers, professional practitioners or households and the extent to which the research supports smarter decisions and the knock-on consequences of such smart decisions. Embedded at each step in the impact planning, monitoring and evaluation process is the need for Indigenous leadership and participation, capacity enhancement and collaborative partnerships and participatory learning by doing approaches across partners.Discussion: The tool is designed in the context of Indigenous research but the basic idea that the way to assess research impact is to start upfront by defining the users’ of research and their information needs, the decisions confronting them and the extent to which research informs smarter decisions is equally applicable to research in other settings, both applied and

  10. Designer Modeling for Personalized Game Content Creation Tools

    DEFF Research Database (Denmark)

    Liapis, Antonios; Yannakakis, Georgios N.; Togelius, Julian

    2013-01-01

    preferences, goals and processes from their interaction with a computer-aided design tool, and suggests methods and domains within game development where such a model can be applied. We describe how designer modeling could be integrated with current work on automated and mixed-initiative content creation......With the growing use of automated content creation and computer-aided design tools in game development, there is potential for enhancing the design process through personalized interactions between the software and the game developer. This paper proposes designer modeling for capturing the designer’s......, and envision future directions which focus on personalizing the processes to a designer’s particular wishes....

  11. Preliminary Design Through Graphs: A Tool for Automatic Layout Distribution

    Directory of Open Access Journals (Sweden)

    Carlo Biagini

    2015-02-01

    Full Text Available Diagrams are essential in the preliminary stages of design for understanding distributive aspects and assisting the decision-making process. By drawing a schematic graph, designers can visualize in a synthetic way the relationships between many aspects: functions and spaces, distribution of layouts, space adjacency, influence of traffic flows within a facility layout, and so on. This process can be automated through the use of modern Information and Communication Technologies tools (ICT that allow the designers to manage a large quantity of information. The work that we will present is part of an on-going research project into how modern parametric software influences decision-making on the basis of automatic and optimized layout distribution. The method involves two phases: the first aims to define the ontological relation between spaces, with particular reference to a specific building typology (rules of aggregation of spaces; the second entails the implementation of these rules through the use of specialist software. The generation of ontological relations begins with the collection of data from historical manuals and analyses of case studies. These analyses aim to generate a “relationship matrix” based on preferences of space adjacency. The phase of implementing the previously defined rules is based on the use of Grasshopper to analyse and visualize different layout configurations. The layout is generated by simulating a process involving the collision of spheres, which represents specific functions of the design program. The spheres are attracted or rejected as a function of the relationships matrix, as defined above. The layout thus obtained will remain in a sort of abstract state independent of information about the exterior form, but will still provide a useful tool for the decision-making process. In addition, preliminary results gathered through the analysis of case studies will be presented. These results provide a good variety

  12. Research Through Design & Research Through Education

    NARCIS (Netherlands)

    Eggink, Wouter; Mulder-Nijkamp, Maaike; Bohemia, Erik; Kovacevic, Ahmed; Buck, Lyndon; Tollestrup, Christian; Eriksen, Kaare; Ovesen, Nis

    2016-01-01

    The very definition of a university is a place where research and education are intertwined. When there is no research, a university will look like a place for vocational training, and when there are no students to teach, the university is no more than a research institution. This convention of

  13. Road safety audit tools, procedures, and experiences : a literature review and recommendations : research in the framework of the European research project Safety Standards for Road Design and Redesign SAFESTAR, Workpackage 8.

    NARCIS (Netherlands)

    Kooi, R.M. van der

    1999-01-01

    This report describes tools and procedures established in different countries which apply Road Safety Audits (RSA). These RSAs are utilized to identify potential safety problems and they concentrate on safety measures to overcome these problems. This technique is used to detect possible safety

  14. Improving design processes through structured reflection : a prototype software tool

    NARCIS (Netherlands)

    Reymen, I.M.M.J.; Melby, E.

    2001-01-01

    A prototype software tool facilitating the use of a design method supporting structured reflection on design processes is presented. The prototype, called Echo, has been developed to explore the benefits of using a software system to facilitate the use of the design method. Both the prototype

  15. A Gaussian decision-support tool for engineering design process

    NARCIS (Netherlands)

    Rajabali Nejad, Mohammadreza; Spitas, Christos

    2013-01-01

    Decision-making in design is of great importance, resulting in success or failure of a system (Liu et al., 2010; Roozenburg and Eekels, 1995; Spitas, 2011a). This paper describes a robust decision-support tool for engineering design process, which can be used throughout the design process in either

  16. Mindfully implementing simulation tools for supporting pragmatic design inquiries

    NARCIS (Netherlands)

    Hartmann, Timo; olde Scholtenhuis, Léon Luc; Zerjav, Vedran; Champlin, Carissa J

    2015-01-01

    Based upon a conceptualization of the engineering design process as pragmatic inquiry, this paper introduces a framework for supporting designers and design managers with a better understanding of the trade-offs required for a successful implementation of simulation tools. This framework contributes

  17. Designing decision support tools for targeted N-regulation

    DEFF Research Database (Denmark)

    Christensen, Andreas Aagaard; Piil, Kristoffer; Andersen, Peter Stubkjær

    2017-01-01

    data model for land use data – the dNmark landscape model. Based on input data which is corrected and edited by workshop participants, the tool estimates the effect of potential land use scenarios on nutrient emissions. The tool was tested in 5 scenario workshops in case areas in Denmark in 2016...... in Denmark to develop and improve a functioning decision support tool for landscape scale N-management. The aim of the study is to evaluate how a decision support tool can best be designed in order to enable landscape scale strategic N-management practices. Methods: A prototype GIS-tool for capturing......, storing, editing, displaying and modelling landscape scale farming practices and associated emission consequences was developed. The tool was designed to integrate locally held knowledge with national scale datasets in live scenario situations through the implementation of a flexible, uniform and editable...

  18. Designing appropriate complementary feeding recommendations: tools for programmatic action.

    Science.gov (United States)

    Daelmans, Bernadette; Ferguson, Elaine; Lutter, Chessa K; Singh, Neha; Pachón, Helena; Creed-Kanashiro, Hilary; Woldt, Monica; Mangasaryan, Nuné; Cheung, Edith; Mir, Roger; Pareja, Rossina; Briend, André

    2013-09-01

    Suboptimal complementary feeding practices contribute to a rapid increase in the prevalence of stunting in young children from age 6 months. The design of effective programmes to improve infant and young child feeding requires a sound understanding of the local situation and a systematic process for prioritizing interventions, integrating them into existing delivery platforms and monitoring their implementation and impact. The identification of adequate food-based feeding recommendations that respect locally available foods and address gaps in nutrient availability is particularly challenging. We describe two tools that are now available to strengthen infant and young child-feeding programming at national and subnational levels. ProPAN is a set of research tools that guide users through a step-by-step process for identifying problems related to young child nutrition; defining the context in which these problems occur; formulating, testing, and selecting behaviour-change recommendations and nutritional recipes; developing the interventions to promote them; and designing a monitoring and evaluation system to measure progress towards intervention goals. Optifood is a computer-based platform based on linear programming analysis to develop nutrient-adequate feeding recommendations at lowest cost, based on locally available foods with the addition of fortified products or supplements when needed, or best recommendations when the latter are not available. The tools complement each other and a case study from Peru illustrates how they have been used. The readiness of both instruments will enable partners to invest in capacity development for their use in countries and strengthen programmes to address infant and young child feeding and prevent malnutrition. © 2013 John Wiley & Sons Ltd.

  19. Improving Tools and Processes in Mechanical Design Collaboration

    Science.gov (United States)

    Briggs, Clark

    2009-01-01

    Cooperative product development projects in the aerospace and defense industry are held hostage to high cost and risk due to poor alignment of collaborative design tools and processes. This impasse can be broken if companies will jointly develop implementation approaches and practices in support of high value working arrangements. The current tools can be used to better advantage in many situations and there is reason for optimism that tool vendors will provide significant support.

  20. Is Engineering Design Disappearing from Design Research?

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup; Howard, Thomas J.

    2011-01-01

    Most systems and products need to be engineered during their design, based upon scientific insight into principles, mechanisms, materials and production pos-sibilities, leading to reliability, durability and value for the user. Despite the central importance and design’s crucial dependency...

  1. Basic statistical tools in research and data analysis

    Directory of Open Access Journals (Sweden)

    Zulfiqar Ali

    2016-01-01

    Full Text Available Statistical methods involved in carrying out a study include planning, designing, collecting data, analysing, drawing meaningful interpretation and reporting of the research findings. The statistical analysis gives meaning to the meaningless numbers, thereby breathing life into a lifeless data. The results and inferences are precise only if proper statistical tests are used. This article will try to acquaint the reader with the basic research tools that are utilised while conducting various studies. The article covers a brief outline of the variables, an understanding of quantitative and qualitative variables and the measures of central tendency. An idea of the sample size estimation, power analysis and the statistical errors is given. Finally, there is a summary of parametric and non-parametric tests used for data analysis.

  2. The future-essay as a design tool

    DEFF Research Database (Denmark)

    Thomsen, Bente Dahl; Kappel, Anne

    2007-01-01

    The aim of this paper is to present scenarios, photo-essays and future-essays as tools in communication, and as tools for clarifying the use of products in the future and the aesthetic qualities in the programme. In the design process, the programme is a description of the function, the condition...

  3. Computer Aided Design Tools for Extreme Environment Electronics, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This project aims to provide Computer Aided Design (CAD) tools for radiation-tolerant, wide-temperature-range digital, analog, mixed-signal, and radio-frequency...

  4. Computer- Aided Design in Power Engineering Application of Software Tools

    CERN Document Server

    Stojkovic, Zlatan

    2012-01-01

    This textbooks demonstrates the application of software tools in solving a series of problems from the field of designing power system structures and systems. It contains four chapters: The first chapter leads the reader through all the phases necessary in the procedures of computer aided modeling and simulation. It guides through the complex problems presenting on the basis of eleven original examples. The second chapter presents  application of software tools in power system calculations of power systems equipment design. Several design example calculations are carried out using engineering standards like MATLAB, EMTP/ATP, Excel & Access, AutoCAD and Simulink. The third chapters focuses on the graphical documentation using a collection of software tools (AutoCAD, EPLAN, SIMARIS SIVACON, SIMARIS DESIGN) which enable the complete automation of the development of graphical documentation of a power systems. In the fourth chapter, the application of software tools in the project management in power systems ...

  5. Logical Framework Analysis (LFA): An Essential Tool for Designing ...

    African Journals Online (AJOL)

    Logical Framework Analysis (LFA): An Essential Tool for Designing Agricultural Project ... overview of the process and the structure of the Logical Framework Matrix or Logframe, derivable from it, ..... System Approach to Managing The Project.

  6. Design of a novel parallel reconfigurable machine tool

    CSIR Research Space (South Africa)

    Modungwa, D

    2008-06-01

    Full Text Available of meeting the demands for high mechanical dexterity adaptation as well as high stiffness necessary for mould and die re-conditioning. This paper presents, the design of parallel reconfigurable machine tool (PRMT) based on both application...

  7. Resources for Indoor Air Quality Design Tools for Schools

    Science.gov (United States)

    The information available here is presented as a tool to help school districts and facility planners design the next generation of learning environments so that the school facility will help schools in achieving their core mission of educating children.

  8. fMRI paradigm designing and post-processing tools

    International Nuclear Information System (INIS)

    James, Jija S; Rajesh, PG; Chandran, Anuvitha VS; Kesavadas, Chandrasekharan

    2014-01-01

    In this article, we first review some aspects of functional magnetic resonance imaging (fMRI) paradigm designing for major cognitive functions by using stimulus delivery systems like Cogent, E-Prime, Presentation, etc., along with their technical aspects. We also review the stimulus presentation possibilities (block, event-related) for visual or auditory paradigms and their advantage in both clinical and research setting. The second part mainly focus on various fMRI data post-processing tools such as Statistical Parametric Mapping (SPM) and Brain Voyager, and discuss the particulars of various preprocessing steps involved (realignment, co-registration, normalization, smoothing) in these software and also the statistical analysis principles of General Linear Modeling for final interpretation of a functional activation result

  9. Primer on consumer marketing research : procedures, methods, and tools

    Science.gov (United States)

    1994-03-01

    The Volpe Center developed a marketing research primer which provides a guide to the approach, procedures, and research tools used by private industry in predicting consumer response. The final two chapters of the primer focus on the challenges of do...

  10. The CATS Service: An Astrophysical Research Tool

    Directory of Open Access Journals (Sweden)

    O V Verkhodanov

    2009-03-01

    Full Text Available We describe the current status of CATS (astrophysical CATalogs Support system, a publicly accessible tool maintained at Special Astrophysical Observatory of the Russian Academy of Sciences (SAO RAS (http://cats.sao.ru allowing one to search hundreds of catalogs of astronomical objects discovered all along the electromagnetic spectrum. Our emphasis is mainly on catalogs of radio continuum sources observed from 10 MHz to 245 GHz, and secondly on catalogs of objects such as radio and active stars, X-ray binaries, planetary nebulae, HII regions, supernova remnants, pulsars, nearby and radio galaxies, AGN and quasars. CATS also includes the catalogs from the largest extragalactic surveys with non-radio waves. In 2008 CATS comprised a total of about 109 records from over 400 catalogs in the radio, IR, optical and X-ray windows, including most source catalogs deriving from observations with the Russian radio telescope RATAN-600. CATS offers several search tools through different ways of access, e.g. via Web-interface and e-mail. Since its creation in 1997 CATS has managed about 105requests. Currently CATS is used by external users about 1500 times per day and since its opening to the public in 1997 has received about 4000 requests for its selection and matching tasks.

  11. From FUELCON to FUELGEN: tools for fuel reload pattern design

    International Nuclear Information System (INIS)

    Nissan, E.; Zhao, J.; Knight, B.; Soper, A.; Galperin, A.

    2000-01-01

    FUELGEN is an effective tool for refuelling design, i.e., for solving the incore fuel management problem at nuclear power plants. Devising good fuel allocations for reloading the core of a given nuclear reactor, for a given operation cycle, is crucial for keeping down operation costs at plants. Fuel comes in different types, and is positioned in a grid representing the core of a reactor. The starting point was Galperin and Nissan's prototype which eventually led to FUELCON, a rule-based expert system with the same task. FUELGEN, instead, is based on a genetic algorithm for optimization, and is at the current forefront of research in refuelling design, where genetic techniques are now getting increasing recognition. The end result of over a decade of research within this sequence of projects yielded a set of alternative, partly overlapping architectures. Nodal algorithms to carry out parameter prediction by simulation, heuristic rules in FUELCON's ruleset and metal-level refinement ergonomic techniques by which the ruleset can be refined during a session with FUELCON, attempts with neural computation on top of the latter, and then, replacing the ruleset altogether by resorting to genetic algorithms, are the sequence of techniques that were in turn applied, in the development of FUELCON and the FUELGEN. This actually reflects the sequence of emergence of expert systems and then neural computation methods, then genetic and hybrid methods, in knowledge engineering in general and in its application to nuclear engineering in particular. (orig.)

  12. Research by Design, Demarcation and Recoginition

    NARCIS (Netherlands)

    Doevendans, C.H.; Sap, H.A.; Langenhuizen, Anja; Ouwerkerk, Marieke van; Rosemann, Jurgen

    2001-01-01

    There is a strong tendency to see designing as a form of research; research by design. On the other hand it is stated that the urban design discipline has ceased to exist or does not develop anymore. Is this correct and can 'research by design' change this situation? These are the questions of

  13. Research by design - a research strategy

    DEFF Research Database (Denmark)

    Hauberg, Jørgen

    2011-01-01

    Abstract The idea of an expressive component in research is important to the architectural industry. The expressive element - the possibility of expressing the qualitative aspects of the world and adding something new to the existing through experiments and proposals - is characteristic....... Research is ‘coloured’ by traditions and professions, and research in architecture should be coloured too, taking in consideration that the practise of architects stretch from natural science and sociology to art, and because the most important way in which the architect achieves new cognition is through...... for the field. All research environments, in the science tradition and in the humanities, have their characteristics. On the one hand, they live up to certain common scientific and methodological criteria - originality and transparency - on the other hand they have different practices, using different methods...

  14. Research by Design - a research strategy

    DEFF Research Database (Denmark)

    Hauberg, Jørgen

    2011-01-01

    Abstract The idea of an expressive component in research is important to the architectural industry. The expressive element - the possibility of expressing the qualitative aspects of the world and adding something new to the existing through experiments and proposals - is characteristic...... methods. Research is ‘coloured’ by traditions and professions, and research in architecture should be coloured too, taking into consideration that the practice of architects stretches from natural science and sociology to art and that the most important way in which the architect achieves new cognition...... for the field. All research environments, in the science tradition and in the humanities, have their characteristics. On the one hand, they live up to certain common scientific and methodological criteria - originality and transparency – and on the other hand, they have different practices, using different...

  15. Narratives and Activity Theory as Reflective Tools in Action Research

    Science.gov (United States)

    Stuart, Kaz

    2012-01-01

    Narratives and activity theory are useful as socially constructed data collection tools that allow a researcher access to the social, cultural and historical meanings that research participants place on events in their lives. This case study shows how these tools were used to promote reflection within a cultural-historical activity theoretically…

  16. Developing theory-driven design research

    DEFF Research Database (Denmark)

    Cash, Philip J.

    2018-01-01

    Design research is increasingly weak in comparison with other fields; without action to increase scientific, theoretical, and methodological rigour there is a real possibility of the field being superseded and becoming obsolete through lack of impact. The aim of this paper is to show how design r....... I identify key learning indicating future directions for theory-driven design research. I conclude by providing some concrete recommendations for the field of design research and individual design researchers....

  17. Research design models: a new category

    International Nuclear Information System (INIS)

    Burgeson, D.A.

    1983-01-01

    This paper discusses the concept of a research design model and how it differs from an engineering design model. Essentially, the research design model draws on the methods, materials and processes of engineering design models but more emphasis is placed on conceptualization in 3-D. Typically, equipment and processes in research are unique. Often, there are competing concepts from which to decide. The approach which is evolving at Sandia National Laboratories mixes preliminary, engineering and research design on the same model

  18. Guidance for the Design and Adoption of Analytic Tools.

    Energy Technology Data Exchange (ETDEWEB)

    Bandlow, Alisa [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    The goal is to make software developers aware of common issues that can impede the adoption of analytic tools. This paper provides a summary of guidelines, lessons learned and existing research to explain what is currently known about what analysts want and how to better understand what tools they do and don't need.

  19. Design Space Exploration and Optimization Using Modern Ship Design Tools

    Science.gov (United States)

    2014-06-01

    Model Editor will open again. Aviation Facilities Indicator should be set to MINOR AVN since we are required to have two helicopters in our design. The...other options are NONE and MAJOR AVN . The former should be selected if no aviation facilities are required and the latter should be chosen only for

  20. A Modeling Tool for Household Biogas Burner Flame Port Design

    Science.gov (United States)

    Decker, Thomas J.

    Anaerobic digestion is a well-known and potentially beneficial process for rural communities in emerging markets, providing the opportunity to generate usable gaseous fuel from agricultural waste. With recent developments in low-cost digestion technology, communities across the world are gaining affordable access to the benefits of anaerobic digestion derived biogas. For example, biogas can displace conventional cooking fuels such as biomass (wood, charcoal, dung) and Liquefied Petroleum Gas (LPG), effectively reducing harmful emissions and fuel cost respectively. To support the ongoing scaling effort of biogas in rural communities, this study has developed and tested a design tool aimed at optimizing flame port geometry for household biogas-fired burners. The tool consists of a multi-component simulation that incorporates three-dimensional CAD designs with simulated chemical kinetics and computational fluid dynamics. An array of circular and rectangular port designs was developed for a widely available biogas stove (called the Lotus) as part of this study. These port designs were created through guidance from previous studies found in the literature. The three highest performing designs identified by the tool were manufactured and tested experimentally to validate tool output and to compare against the original port geometry. The experimental results aligned with the tool's prediction for the three chosen designs. Each design demonstrated improved thermal efficiency relative to the original, with one configuration of circular ports exhibiting superior performance. The results of the study indicated that designing for a targeted range of port hydraulic diameter, velocity and mixture density in the tool is a relevant way to improve the thermal efficiency of a biogas burner. Conversely, the emissions predictions made by the tool were found to be unreliable and incongruent with laboratory experiments.

  1. Reflections on Design-Based Research

    DEFF Research Database (Denmark)

    Ørngreen, Rikke

    2015-01-01

    Design-Based Research is an intervention method that researches educational design (products or processes) in real-life settings with the dual purpose of generating theories about the domain and develop the design iteratively. This paper is an integrative review with a personal ethnographic...... narrative that draws on Design-Based Research literature, and identifies and discusses elements from Interaction Design and Action Research that the Design-Based Research approach could apply, situating the research in online educational projects, where participants are distributed in time and space...

  2. Meson facility. Powerful new research tool

    International Nuclear Information System (INIS)

    Lobashev, V.M.; Tavkhelidze, A.N.

    A meson facility is being built at the Institute of Nuclear Research, USSR Academy of Sciences, in Troitsk, where the Scientific Center, USSR Academy of Sciences is located. The facility will include a linear accelerator for protons and negative hydrogen ions with 600 MeV energy and 0.5-1 mA beam current. Some fundamental studies that can be studied at a meson facility are described in the areas of elementary particles, neutron physics, solid state physics, and applied research. The characteristics of the linear accelerator are given and the meson facility's experimental complex is described

  3. Systems scenarios: a tool for facilitating the socio-technical design of work systems.

    Science.gov (United States)

    Hughes, Helen P N; Clegg, Chris W; Bolton, Lucy E; Machon, Lauren C

    2017-10-01

    The socio-technical systems approach to design is well documented. Recognising the benefits of this approach, organisations are increasingly trying to work with systems, rather than their component parts. However, few tools attempt to analyse the complexity inherent in such systems, in ways that generate useful, practical outputs. In this paper, we outline the 'System Scenarios Tool' (SST), which is a novel, applied methodology that can be used by designers, end-users, consultants or researchers to help design or re-design work systems. The paper introduces the SST using examples of its application, and describes the potential benefits of its use, before reflecting on its limitations. Finally, we discuss potential opportunities for the tool, and describe sets of circumstances in which it might be used. Practitioner Summary: The paper presents a novel, applied methodological tool, named the 'Systems Scenarios Tool'. We believe this tool can be used as a point of reference by designers, end-users, consultants or researchers, to help design or re-design work systems. Included in the paper are two worked examples, demonstrating the tool's application.

  4. LITERATURE REVIEWING WITH RESEARCH TOOLS, Part 3: Writing Literature Review

    OpenAIRE

    Ebrahim, Nader Ale

    2017-01-01

    Research Tools” enable researchers to collect, organize, analyze, visualize and publicized research outputs. Dr. Nader has collected over 700 tools that enable students to follow the correct path in research and to ultimately produce high-quality research outputs with more accuracy and efficiency. It is assembled as an interactive Web-based mind map, titled “Research Tools”, which is updated periodically. “Research Tools” consists of a hierarchical set of nodes. It has four main nodes: (1)...

  5. LITERATURE REVIEWING WITH RESEARCH TOOLS, Part 2: Finding proper articles

    OpenAIRE

    Ebrahim, Nader Ale

    2017-01-01

    Research Tools” enable researchers to collect, organize, analyze, visualize and publicized research outputs. Dr. Nader has collected over 700 tools that enable students to follow the correct path in research and to ultimately produce high-quality research outputs with more accuracy and efficiency. It is assembled as an interactive Web-based mind map, titled “Research Tools”, which is updated periodically. “Research Tools” consists of a hierarchical set of nodes. It has four main nodes: (1)...

  6. The Application of Concurrent Engineering Tools and Design Structure Matrix in Designing Tire

    Science.gov (United States)

    Ginting, Rosnani; Fachrozi Fitra Ramadhan, T.

    2016-02-01

    The development of automobile industry in Indonesia is growing rapidly. This phenomenon causes companies related to the automobile industry such as tire industry must develop products based on customers’ needs and considering the timeliness of delivering the product to the customer. It could be reached by applying strategic planning in developing an integrated concept of product development. This research was held in PT. XYZ that applied the sequential approach in designing and developing products. The need to improve in one stage of product development could occur re-designing that needs longer time in developing a new product. This research is intended to get an integrated product design concept of tire pertaining to the customer's needs using Concurrent Engineering Tools by implementing the two-phased of product development. The implementation of Concurrent Engineering approach results in applying the stage of project planning, conceptual design, and product modules. The product modules consist of four modules that using Product Architecture - Design Structure Matrix to ease the designing process of new product development.

  7. Report on design rules of μ-tools for hybrid tooling

    DEFF Research Database (Denmark)

    Esmoris, Jose Ignacio; Azcarate, S.; Tosello, Guido

    2011-01-01

    -effectively, especially for micro injection moulding. This particular deliverable has the objective to present the design rules for high performance μ-tools and inserts manufacture based on the new standard manufacturing process chains established during the WP 2.2 work. In particular, the achievable features, surfaces......Tooling is one of the critical stages of the process chain for polymer micro products manufacture and in particular for the COTECH process chain. Therefore, within the scope of SP2 “Tooling”, the WP 2.2 “New tool-making solutions for μ-IM and HE” is designed to investigate, develop and standardize...

  8. Participant Observation, Anthropology Methodology and Design Anthropology Research Inquiry

    Science.gov (United States)

    Gunn, Wendy; Løgstrup, Louise B.

    2014-01-01

    Within the design studio, and across multiple field sites, the authors compare involvement of research tools and materials during collaborative processes of designing. Their aim is to trace temporal dimensions (shifts/ movements) of where and when learning takes place along different sites of practice. They do so by combining participant…

  9. Using a Design Science Perspective to Understand a Complex Design-Based Research Process

    DEFF Research Database (Denmark)

    Bækgaard, Lars

    2012-01-01

    The purpose of the paper is to demonstrate how a design science perspective can be used to describe and understand a set of related design-based research processes. We describe and analyze a case study in a manner that is inspired by design science. The case study involves the design of modeling......-based research processes. And we argue that a design science perspective may be useful for both researchers and practitioners....... tools and the redesign of an information service in a library. We use a set of guidelines from a design science perspective to organize the description and analysis of the case study. By doing this we demonstrate the usefulness of design science as an analytical tool for understanding related design...

  10. Hygrothermal Simulation: A Tool for Building Envelope Design Analysis

    Science.gov (United States)

    Samuel V. Glass; Anton TenWolde; Samuel L. Zelinka

    2013-01-01

    Is it possible to gauge the risk of moisture problems while designing the building envelope? This article provides a brief introduction to computer-based hygrothermal (heat and moisture) simulation, shows how simulation can be useful as a design tool, and points out a number of im-portant considerations regarding model inputs and limita-tions. Hygrothermal simulation...

  11. Ecological Interface Design of a Tactical Airborne Separation Assistance Tool

    NARCIS (Netherlands)

    Van Dam, S.; Mulder, M.; Van Paassen, M.M.

    2008-01-01

    In a free-flight airspace environment, pilots have more freedom to choose user-preferred trajectories. An onboard pilot support system is needed that exploits travel freedom while maintaining spatial separation with other traffic. Ecological interface design is used to design an interface tool that

  12. A tangible design tool for sketching materials in products

    NARCIS (Netherlands)

    Saakes, D.P.; Stappers, P.J.

    2009-01-01

    Industrial designers make sketches and physical models to start and develop ideas and concept designs. Such representations have advantages that they support fast, intuitive, rich, sensory exploration of solutions. Although existing tools and techniques provide adequate support where the shape of

  13. Designing the user experience of game development tools

    CERN Document Server

    Lightbown, David

    2015-01-01

    The Big Green Button My Story Who Should Read this Book? Companion Website and Twitter Account Before we BeginWelcome to Designing the User Experience of Game Development ToolsWhat Will We Learn in This Chapter?What Is This Book About?Defining User ExperienceThe Value of Improving the User Experience of Our ToolsParallels Between User Experience and Game DesignHow Do People Benefit From an Improved User Experience?Finding the Right BalanceWrapping UpThe User-Centered Design ProcessWhat Will We

  14. Equity Audit: A Teacher Leadership Tool for Nurturing Teacher Research

    Science.gov (United States)

    View, Jenice L.; DeMulder, Elizabeth; Stribling, Stacia; Dodman, Stephanie; Ra, Sophia; Hall, Beth; Swalwell, Katy

    2016-01-01

    This is a three-part essay featuring six teacher educators and one classroom teacher researcher. Part one describes faculty efforts to build curriculum for teacher research, scaffold the research process, and analyze outcomes. Part two shares one teacher researcher's experience using an equity audit tool in several contexts: her teaching practice,…

  15. Depth of Field: Discursive design research through film

    Directory of Open Access Journals (Sweden)

    Timo Arnall

    2010-07-01

    Full Text Available This article is about the role of film in interaction and product design research with technology, and the use of film in exploring and explaining emerging technologies in multiple contexts. We have engaged in a reflective design research process that uses graphical, audiovisual, and time-based media as a tool, a material and a communicative artefact that enables us to approach complex, obscure and often invisible emerging technologies. We give a discursive account of how film has played an intricate role in our design research practice, from revealing the materiality of invisible wireless technology, to explaining complex technical prototypes, to communicating to a public audience through online films that may fold broader social and cultural discourses back into our design research process. We conclude by elaborating on discursive design approaches to research that use film as a reflective and communicative medium that allows for design research to operate within a social and cultural frame.

  16. Simulation tools for robotics research and assessment

    Science.gov (United States)

    Fields, MaryAnne; Brewer, Ralph; Edge, Harris L.; Pusey, Jason L.; Weller, Ed; Patel, Dilip G.; DiBerardino, Charles A.

    2016-05-01

    The Robotics Collaborative Technology Alliance (RCTA) program focuses on four overlapping technology areas: Perception, Intelligence, Human-Robot Interaction (HRI), and Dexterous Manipulation and Unique Mobility (DMUM). In addition, the RCTA program has a requirement to assess progress of this research in standalone as well as integrated form. Since the research is evolving and the robotic platforms with unique mobility and dexterous manipulation are in the early development stage and very expensive, an alternate approach is needed for efficient assessment. Simulation of robotic systems, platforms, sensors, and algorithms, is an attractive alternative to expensive field-based testing. Simulation can provide insight during development and debugging unavailable by many other means. This paper explores the maturity of robotic simulation systems for applications to real-world problems in robotic systems research. Open source (such as Gazebo and Moby), commercial (Simulink, Actin, LMS), government (ANVEL/VANE), and the RCTA-developed RIVET simulation environments are examined with respect to their application in the robotic research domains of Perception, Intelligence, HRI, and DMUM. Tradeoffs for applications to representative problems from each domain are presented, along with known deficiencies and disadvantages. In particular, no single robotic simulation environment adequately covers the needs of the robotic researcher in all of the domains. Simulation for DMUM poses unique constraints on the development of physics-based computational models of the robot, the environment and objects within the environment, and the interactions between them. Most current robot simulations focus on quasi-static systems, but dynamic robotic motion places an increased emphasis on the accuracy of the computational models. In order to understand the interaction of dynamic multi-body systems, such as limbed robots, with the environment, it may be necessary to build component

  17. Framing design research for service orientation through PSS approaches

    DEFF Research Database (Denmark)

    Sakao, Tomohiko; Sandström, Gunilla Ölundh; Matzen, Detlef

    2009-01-01

    on the literature analysis, the authors present three crucial dimensions for service oriented design research, i.e. an offer dimension representing products and services, a provider dimension, and a customer/user dimension. In addition, three research targets are proposed; PSS-offer modelling, PSS development......, and PSS potential. Furthermore, several promising future research directions are identified. These include evaluating economic consequences or environmental benefits, establishing terminology, organizational issues, and developing methods and tools to support designers. The boundaries to other research...... fields are getting blurry and many aspects of other professionalisms must be taken into account. Thus, there is especially need in future research to open towards other research areas....

  18. The Role of Hypothesis in Constructive Design Research

    DEFF Research Database (Denmark)

    Bang, Anne Louise; Krogh, Peter; Ludvigsen, Martin

    2012-01-01

    and solid perspective on how to keep constructive design research on track, this paper offers a model for understanding the role of hypothesis in constructive design research. The model allows for understanding the hypothesis’s relation to research motivation, questions, experiments, evaluation...... and knowledge production. The intention of the model is to have it serve as a tool in the research process aiding the researcher to understand at what “level” discussions and claims are brought forward, and what consequences these might have for the research work at hand. Thus, the paper claims the central...

  19. Intermediate/Advanced Research Design and Statistics

    Science.gov (United States)

    Ploutz-Snyder, Robert

    2009-01-01

    The purpose of this module is To provide Institutional Researchers (IRs) with an understanding of the principles of advanced research design and the intermediate/advanced statistical procedures consistent with such designs

  20. Designing interaction, voice, and inclusion in AAC research.

    Science.gov (United States)

    Pullin, Graham; Treviranus, Jutta; Patel, Rupal; Higginbotham, Jeff

    2017-09-01

    The ISAAC 2016 Research Symposium included a Design Stream that examined timely issues across augmentative and alternative communication (AAC), framed in terms of designing interaction, designing voice, and designing inclusion. Each is a complex term with multiple meanings; together they represent challenging yet important frontiers of AAC research. The Design Stream was conceived by the four authors, researchers who have been exploring AAC and disability-related design throughout their careers, brought together by a shared conviction that designing for communication implies more than ensuring access to words and utterances. Each of these presenters came to AAC from a different background: interaction design, inclusive design, speech science, and social science. The resulting discussion among 24 symposium participants included controversies about the role of technology, tensions about independence and interdependence, and a provocation about taste. The paper concludes by proposing new directions for AAC research: (a) new interdisciplinary research could combine scientific and design research methods, as distant yet complementary as microanalysis and interaction design, (b) new research tools could seed accessible and engaging contextual research into voice within a social model of disability, and (c) new open research networks could support inclusive, international and interdisciplinary research.

  1. Users’ perception of visual design and usefulness of a web-based educational tool

    OpenAIRE

    Sánchez Franco, Manuel Jesús; Villarejo Ramos, Ángel Francisco; Peral Peral, Begoña; Buitrago Esquinas, Eva María; Roldán Salgueiro, José Luis

    2012-01-01

    Our research has become increasingly aware of the relevance of visual design in understanding learners’ attitudes towards the use of virtual tools. Likewise, perceived usefulness is an essential antecedent of the cumulative impressions of and preferences for them. Therefore, the aim of this study is to investigate the main effects of visual design and usefulness on learning and productivity in the domain of web-based educational tools. A Structural Equation Modelling, specifically Partial Lea...

  2. Searching for Sentient Design Tools for Game Development

    DEFF Research Database (Denmark)

    Liapis, Antonios

    their generative algorithms) and to their human users (who must take all design decisions), respectively. This thesis argues that computers can be creative partners to human designers rather than mere slaves; game design tools can be aware of designer intentions, preferences and routines, and can accommodate them...... or even subvert them. This thesis presents Sentient Sketchbook, a tool for designing game level abstractions of different game genres, which assists the level designer as it automatically tests maps for playability constraints, evaluates and displays the map's gameplay properties and creates alternatives......Over the last twenty years, computer games have grown from a niche market targeting young adults to an important player in the global economy, engaging millions of people from different cultural backgrounds. As both the number and the size of computer games continue to rise, game companies handle...

  3. Sharing Video Datasets in Design Research

    DEFF Research Database (Denmark)

    Christensen, Bo; Abildgaard, Sille Julie Jøhnk

    2017-01-01

    This paper examines how design researchers, design practitioners and design education can benefit from sharing a dataset. We present the Design Thinking Research Symposium 11 (DTRS11) as an exemplary project that implied sharing video data of design processes and design activity in natural settings...... with a large group of fellow academics from the international community of Design Thinking Research, for the purpose of facilitating research collaboration and communication within the field of Design and Design Thinking. This approach emphasizes the social and collaborative aspects of design research, where...... a multitude of appropriate perspectives and methods may be utilized in analyzing and discussing the singular dataset. The shared data is, from this perspective, understood as a design object in itself, which facilitates new ways of working, collaborating, studying, learning and educating within the expanding...

  4. Vehicle Technology Simulation and Analysis Tools | Transportation Research

    Science.gov (United States)

    Analysis Tools NREL developed the following modeling, simulation, and analysis tools to investigate novel design goals (e.g., fuel economy versus performance) to find cost-competitive solutions. ADOPT Vehicle Simulator to analyze the performance and fuel economy of conventional and advanced light- and

  5. Development of dosimetry tools for proton therapy research

    International Nuclear Information System (INIS)

    Kim, Jong-Won; Kim, Dogyun

    2010-01-01

    Dosimetry tools for proton therapy research have been developed to measure the properties of a therapeutic proton beam. A CCD camera-scintillation screen system, which can verify the 2D dose distribution of a scanning beam and can be used for proton radiography, was developed. Also developed were a large area parallel-plate ionization chamber and a multi-layer Faraday cup to monitor the beam current and to measure the beam energy, respectively. To investigate the feasibility of locating the distal dose falloff in real time during patient treatment, a prompt gamma measuring system composed of multi-layer shielding structures was then devised. The system worked well for a pristine proton beam. However, correlation between the distal dose falloff and the prompt gamma distribution was blurred by neutron background for a therapy beam formed by scattering method. We have also worked on the design of a Compton camera to image the 2D distribution of prompt gamma rays.

  6. How Design-based Research, Action Research and Interaction Design Contributes to the Development of Designs for Learning

    DEFF Research Database (Denmark)

    Majgaard, Gunver; Misfeldt, Morten; Nielsen, Jacob

    2011-01-01

    This article explores how action research, design based research and interaction design can be combined and used in the development of educational robotic tools. Our case study is the development of Number Blocks and it combines physical interaction, learning, and immediate feedback. Number Blocks...... supports the children's understanding of place value in the sense that it allows them to experiment with creating large numbers. The development was done in collaboration with a class of 7-8 year old children and their mathematics teacher. The article argues that elements from different research methods...... allowed a structured approach to projects that combines educational research and innovation of new learning technologies. Key elements of this approach is acknowledging the users input, developing a theoretical pre-analysis and using an iterative approach....

  7. 3D Design Tools for Vacuum Electron Devices

    International Nuclear Information System (INIS)

    Levush, Baruch

    2003-01-01

    A reduction of development costs will have a significant impact on the total cost of the vacuum electron devices. Experimental testing cycles can be reduced or eliminated through the use of simulation-based design methodology, thereby reducing the time and cost of development. Moreover, by use of modern optimization tools for automating the process of seeking specific solution parameters and for studying dependencies of performance on parameters, new performance capabilities can be achieved, without resorting to expensive cycles of hardware fabrication and testing. Simulation-based-design will also provide the basis for sensitivity studies for determining the manufacturing tolerances associated with a particular design. Since material properties can have a critical effect on the performance of the vacuum electron devices, the design tools require precise knowledge of material characteristics, such as dielectric properties of the support rods, loss profile etc. Sensitivity studies must therefore include the effects of materials properties variation on device performance. This will provide insight for choosing the proper technological processes in order to achieve these tolerances, which is of great importance for achieving cost reduction. A successful design methodology depends on the development of accurate and efficient design tools with predictive capabilities. These design tools must be based on realistic models capable of high fidelity representation of geometry and materials, they must have optimization capabilities, and they must be easy to use

  8. A Revised Interface for the ARL Topodef Mobility Design Tool

    Science.gov (United States)

    2012-04-01

    designed paths as though moving down a conveyor belt . Giving paths an existence independent of the nodes that travel along them not only makes their...A Revised Interface for the ARL Topodef Mobility Design Tool by Andrew J. Toth and Michael Christensen ARL-TR-5980 April 2012...Disclaimers The findings in this report are not to be construed as an official Department of the Army position unless so designated by other

  9. Tool-based requirement traceability between requirement and design artifacts

    CERN Document Server

    Turban, Bernhard

    2013-01-01

    Processes for developing safety-critical systems impose special demands on ensuring requirements traceability. Achieving valuable traceability information, however, is especially difficult concerning the transition from requirements to design. Bernhard Turban analyzes systems and software engineering theories cross-cutting the issue (embedded systems development, systems engineering, software engineering, requirements engineering and management, design theory and processes for safety-critical systems). As a solution, the author proposes a new tool approach to support designers in their thinkin

  10. A review of electronic engineering design free software tools

    OpenAIRE

    Medrano Sánchez, Carlos; Plaza García, Inmaculada; Castro Gil, Manuel Alonso; García Sevilla, Francisco; Martínez Calero, J.D.; Pou Félix, Josep; Corbalán Fuertes, Montserrat

    2010-01-01

    In this paper, we review electronic design free software tools. We have searched open source programs that help with several tasks of the electronic design flow: analog and digital simulation, schematic capture, printed circuit board design and hardware description language compilation and simulation. Using some rapid criteria for verifying their availability, we have selected some of them which are worth working with. This work intends to perform a deeper analysis of fre...

  11. Computational Tools and Algorithms for Designing Customized Synthetic Genes

    Directory of Open Access Journals (Sweden)

    Nathan eGould

    2014-10-01

    Full Text Available Advances in DNA synthesis have enabled the construction of artificial genes, gene circuits, and genomes of bacterial scale. Freedom in de-novo design of synthetic constructs provides significant power in studying the impact of mutations in sequence features, and verifying hypotheses on the functional information that is encoded in nucleic and amino acids. To aid this goal, a large number of software tools of variable sophistication have been implemented, enabling the design of synthetic genes for sequence optimization based on rationally defined properties. The first generation of tools dealt predominantly with singular objectives such as codon usage optimization and unique restriction site incorporation. Recent years have seen the emergence of sequence design tools that aim to evolve sequences toward combinations of objectives. The design of optimal protein coding sequences adhering to multiple objectives is computationally hard, and most tools rely on heuristics to sample the vast sequence design space. In this review we study some of the algorithmic issues behind gene optimization and the approaches that different tools have adopted to redesign genes and optimize desired coding features. We utilize test cases to demonstrate the efficiency of each approach, as well as identify their strengths and limitations.

  12. Computational Tools and Algorithms for Designing Customized Synthetic Genes

    Energy Technology Data Exchange (ETDEWEB)

    Gould, Nathan [Department of Computer Science, The College of New Jersey, Ewing, NJ (United States); Hendy, Oliver [Department of Biology, The College of New Jersey, Ewing, NJ (United States); Papamichail, Dimitris, E-mail: papamicd@tcnj.edu [Department of Computer Science, The College of New Jersey, Ewing, NJ (United States)

    2014-10-06

    Advances in DNA synthesis have enabled the construction of artificial genes, gene circuits, and genomes of bacterial scale. Freedom in de novo design of synthetic constructs provides significant power in studying the impact of mutations in sequence features, and verifying hypotheses on the functional information that is encoded in nucleic and amino acids. To aid this goal, a large number of software tools of variable sophistication have been implemented, enabling the design of synthetic genes for sequence optimization based on rationally defined properties. The first generation of tools dealt predominantly with singular objectives such as codon usage optimization and unique restriction site incorporation. Recent years have seen the emergence of sequence design tools that aim to evolve sequences toward combinations of objectives. The design of optimal protein-coding sequences adhering to multiple objectives is computationally hard, and most tools rely on heuristics to sample the vast sequence design space. In this review, we study some of the algorithmic issues behind gene optimization and the approaches that different tools have adopted to redesign genes and optimize desired coding features. We utilize test cases to demonstrate the efficiency of each approach, as well as identify their strengths and limitations.

  13. Computational Tools and Algorithms for Designing Customized Synthetic Genes

    International Nuclear Information System (INIS)

    Gould, Nathan; Hendy, Oliver; Papamichail, Dimitris

    2014-01-01

    Advances in DNA synthesis have enabled the construction of artificial genes, gene circuits, and genomes of bacterial scale. Freedom in de novo design of synthetic constructs provides significant power in studying the impact of mutations in sequence features, and verifying hypotheses on the functional information that is encoded in nucleic and amino acids. To aid this goal, a large number of software tools of variable sophistication have been implemented, enabling the design of synthetic genes for sequence optimization based on rationally defined properties. The first generation of tools dealt predominantly with singular objectives such as codon usage optimization and unique restriction site incorporation. Recent years have seen the emergence of sequence design tools that aim to evolve sequences toward combinations of objectives. The design of optimal protein-coding sequences adhering to multiple objectives is computationally hard, and most tools rely on heuristics to sample the vast sequence design space. In this review, we study some of the algorithmic issues behind gene optimization and the approaches that different tools have adopted to redesign genes and optimize desired coding features. We utilize test cases to demonstrate the efficiency of each approach, as well as identify their strengths and limitations.

  14. Analysis of functionality free CASE-tools databases design

    Directory of Open Access Journals (Sweden)

    A. V. Gavrilov

    2016-01-01

    Full Text Available The introduction in the educational process of database design CASEtechnologies requires the institution of significant costs for the purchase of software. A possible solution could be the use of free software peers. At the same time this kind of substitution should be based on even-com representation of the functional characteristics and features of operation of these programs. The purpose of the article – a review of the free and non-profi t CASE-tools database design, as well as their classifi cation on the basis of the analysis functionality. When writing this article were used materials from the offi cial websites of the tool developers. Evaluation of the functional characteristics of CASEtools for database design made exclusively empirically with the direct work with software products. Analysis functionality of tools allow you to distinguish the two categories CASE-tools database design. The first category includes systems with a basic set of features and tools. The most important basic functions of these systems are: management connections to database servers, visual tools to create and modify database objects (tables, views, triggers, procedures, the ability to enter and edit data in table mode, user and privilege management tools, editor SQL-code, means export/import data. CASE-system related to the first category can be used to design and develop simple databases, data management, as well as a means of administration server database. A distinctive feature of the second category of CASE-tools for database design (full-featured systems is the presence of visual designer, allowing to carry out the construction of the database model and automatic creation of the database on the server based on this model. CASE-system related to this categories can be used for the design and development of databases of any structural complexity, as well as a database server administration tool. The article concluded that the

  15. Research oriented projects on design themese

    DEFF Research Database (Denmark)

    Tollestrup, Christian; Eriksen, Kaare; Ovesen, Nis

    2011-01-01

    How can design students do research-oriented projects about design themes? At the 3rd semester at the Industrial Design Master Program at Aalborg University this is done by taking research oriented learning objectives on design theories and methods and combining them with experimental case studie...... and professional self-reflection amongst students are improved....

  16. The Design Social: Framing social research methods for design postgraduates.

    OpenAIRE

    Evans, Martyn

    2010-01-01

    This paper discusses approaches for framing social research methods within postgraduate design curricula, details the responses of postgraduate design students to the possibilities presented by social research methods, and concludes with a case study of the adoption experiences of PhD students in design when engaging with social research methods. Analysis of semi-structured interviews is employed to draw out perceptions and experiences of design postgraduates when engaging with social researc...

  17. Tools for Visualizing HIV in Cure Research.

    Science.gov (United States)

    Niessl, Julia; Baxter, Amy E; Kaufmann, Daniel E

    2018-02-01

    The long-lived HIV reservoir remains a major obstacle for an HIV cure. Current techniques to analyze this reservoir are generally population-based. We highlight recent developments in methods visualizing HIV, which offer a different, complementary view, and provide indispensable information for cure strategy development. Recent advances in fluorescence in situ hybridization techniques enabled key developments in reservoir visualization. Flow cytometric detection of HIV mRNAs, concurrently with proteins, provides a high-throughput approach to study the reservoir on a single-cell level. On a tissue level, key spatial information can be obtained detecting viral RNA and DNA in situ by fluorescence microscopy. At total-body level, advancements in non-invasive immuno-positron emission tomography (PET) detection of HIV proteins may allow an encompassing view of HIV reservoir sites. HIV imaging approaches provide important, complementary information regarding the size, phenotype, and localization of the HIV reservoir. Visualizing the reservoir may contribute to the design, assessment, and monitoring of HIV cure strategies in vitro and in vivo.

  18. Pneumatic vehicle. Research and design

    Directory of Open Access Journals (Sweden)

    Lokodi Zsolt

    2011-12-01

    Full Text Available This experimental vehicle was designed for an international competition organized by Bosch Rexroth yearly in Hungary. The purpose of this competition is to design, build and race vehicles with a fuel source of compressed gas. The race consists of multiple events: longest run distance, the smartness track and the best acceleration event. These events test to the limit the capabilities of the designed vehicles.

  19. The GATO gene annotation tool for research laboratories

    Directory of Open Access Journals (Sweden)

    A. Fujita

    2005-11-01

    Full Text Available Large-scale genome projects have generated a rapidly increasing number of DNA sequences. Therefore, development of computational methods to rapidly analyze these sequences is essential for progress in genomic research. Here we present an automatic annotation system for preliminary analysis of DNA sequences. The gene annotation tool (GATO is a Bioinformatics pipeline designed to facilitate routine functional annotation and easy access to annotated genes. It was designed in view of the frequent need of genomic researchers to access data pertaining to a common set of genes. In the GATO system, annotation is generated by querying some of the Web-accessible resources and the information is stored in a local database, which keeps a record of all previous annotation results. GATO may be accessed from everywhere through the internet or may be run locally if a large number of sequences are going to be annotated. It is implemented in PHP and Perl and may be run on any suitable Web server. Usually, installation and application of annotation systems require experience and are time consuming, but GATO is simple and practical, allowing anyone with basic skills in informatics to access it without any special training. GATO can be downloaded at [http://mariwork.iq.usp.br/gato/]. Minimum computer free space required is 2 MB.

  20. A Simulation Tool for the Conceptual Design of Thermonuclear Pulsors

    International Nuclear Information System (INIS)

    Ramos, R.; Gonzalez, J.; Clausse, A.

    2003-01-01

    We worked with an effective model that calculates the neutron production of Plasma Focus devices.From experimental data we obtained different fitting functions for the model lumped parameters.By this way, we obtained a simple tool for neutron yield calculation.This tool is very useful at a conceptual design stage, because it can predict easily if a given PF device would be suitable for a certain application

  1. A Conceptual Design and Structural Analysis for ITER Mid-plane Brace Tools

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Kyoung O; Park, Hyun Ki; Kim, Dong Jin [National Fusion Research Institute, Daejeon (Korea, Republic of); Lee, Jae Hyuk; Kim, Kyung kyu [SFA Engineering Corp., Changwon (Korea, Republic of); Im, Kihak; Robert, Shaw [ITER Organization, St Paul lez Durance Cedex (France)

    2010-10-15

    The ITER, International Thermonuclear Experimental Reactor, Tokamak machine is mainly composed of 9 vacuum vessel (VV)/toroidal field coils (TFCs)/vacuum vessel thermal shields (VVTS) 40 .deg. sectors. Each VV/TFCs/VVTS 40 .deg. sector is made up of one 40 .deg. VV, two 20 .deg. TFCs and associated VVTS segments. The ITER Tokamak assembly tools are purpose-built tools to assemble the ITER Tokamak machine which includes the cryostat and the components contained therein. Based on the design description document prepared by the IO (ITER international organization), Korea has carried out the conceptual design of assembly tools with IO cooperation. The 40 .deg. sector assemblies attached mid-plane brace tools sub-assembled at assembly hall are transferred to Tokamak hall using the lifting tool operated by Tokamak main cranes. The sector sub-assembly tools are composed of the upending tool, the sector sub-assembly tool, the sector lifting tool and the vacuum vessel support and mid-plane brace tools. The mid-plane brace tool is assembled to inner surface of VV and TFCs in phase of sector sub-assembly after completion of all sector components. VV, TFC and VVTS are separated fully before completion of 9 sectors at Tokamak in-pit. In this paper the mid-plane brace tools is introduced about function, structure and status of research and development are also described

  2. Visualization tool for human-machine interface designers

    Science.gov (United States)

    Prevost, Michael P.; Banda, Carolyn P.

    1991-06-01

    As modern human-machine systems continue to grow in capabilities and complexity, system operators are faced with integrating and managing increased quantities of information. Since many information components are highly related to each other, optimizing the spatial and temporal aspects of presenting information to the operator has become a formidable task for the human-machine interface (HMI) designer. The authors describe a tool in an early stage of development, the Information Source Layout Editor (ISLE). This tool is to be used for information presentation design and analysis; it uses human factors guidelines to assist the HMI designer in the spatial layout of the information required by machine operators to perform their tasks effectively. These human factors guidelines address such areas as the functional and physical relatedness of information sources. By representing these relationships with metaphors such as spring tension, attractors, and repellers, the tool can help designers visualize the complex constraint space and interacting effects of moving displays to various alternate locations. The tool contains techniques for visualizing the relative 'goodness' of a configuration, as well as mechanisms such as optimization vectors to provide guidance toward a more optimal design. Also available is a rule-based design checker to determine compliance with selected human factors guidelines.

  3. Nonlinear Shaping Architecture Designed with Using Evolutionary Structural Optimization Tools

    Science.gov (United States)

    Januszkiewicz, Krystyna; Banachowicz, Marta

    2017-10-01

    The paper explores the possibilities of using Structural Optimization Tools (ESO) digital tools in an integrated structural and architectural design in response to the current needs geared towards sustainability, combining ecological and economic efficiency. The first part of the paper defines the Evolutionary Structural Optimization tools, which were developed specifically for engineering purposes using finite element analysis as a framework. The development of ESO has led to several incarnations, which are all briefly discussed (Additive ESO, Bi-directional ESO, Extended ESO). The second part presents result of using these tools in structural and architectural design. Actual building projects which involve optimization as a part of the original design process will be presented (Crematorium in Kakamigahara Gifu, Japan, 2006 SANAA“s Learning Centre, EPFL in Lausanne, Switzerland 2008 among others). The conclusion emphasizes that the structural engineering and architectural design mean directing attention to the solutions which are used by Nature, designing works optimally shaped and forming their own environments. Architectural forms never constitute the optimum shape derived through a form-finding process driven only by structural optimization, but rather embody and integrate a multitude of parameters. It might be assumed that there is a similarity between these processes in nature and the presented design methods. Contemporary digital methods make the simulation of such processes possible, and thus enable us to refer back to the empirical methods of previous generations.

  4. Communicating Qualitative Research Study Designs to Research Ethics Review Boards

    Science.gov (United States)

    Ells, Carolyn

    2011-01-01

    Researchers using qualitative methodologies appear to be particularly prone to having their study designs called into question by research ethics or funding agency review committees. In this paper, the author considers the issue of communicating qualitative research study designs in the context of institutional research ethics review and offers…

  5. Research on early design activities

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    1997-01-01

    This paper tells about the scientific bases for conceptual design. Presented on a course for Danish industrialists arranged by the Institute for Product Development 18th March, 1997.......This paper tells about the scientific bases for conceptual design. Presented on a course for Danish industrialists arranged by the Institute for Product Development 18th March, 1997....

  6. The Development of a Tool for Sustainable Building Design:

    DEFF Research Database (Denmark)

    Tine Ring Hansen, Hanne; Knudstrup, Mary-Ann

    2009-01-01

    for sustainable buildings, as well as, an analysis of the relationship between the different approaches (e.g. low-energy, environmental, green building, solar architecture, bio-climatic architecture etc.) to sustainable building design and these indicators. The paper furthermore discusses how sustainable......The understanding of sustainable building has changed over time along with the architectural interpretation of sustainability. The paper presents the results of a comparative analysis of the indicators found in different internationally acclaimed and Danish certification schemes and standards...... architecture will gain more focus in the coming years, thus, establishing the need for the development of a new tool and methodology, The paper furthermore describes the background and considerations involved in the development of a design support tool for sustainable building design. A tool which considers...

  7. Internet MEMS design tools based on component technology

    Science.gov (United States)

    Brueck, Rainer; Schumer, Christian

    1999-03-01

    The micro electromechanical systems (MEMS) industry in Europe is characterized by small and medium sized enterprises specialized on products to solve problems in specific domains like medicine, automotive sensor technology, etc. In this field of business the technology driven design approach known from micro electronics is not appropriate. Instead each design problem aims at its own, specific technology to be used for the solution. The variety of technologies at hand, like Si-surface, Si-bulk, LIGA, laser, precision engineering requires a huge set of different design tools to be available. No single SME can afford to hold licenses for all these tools. This calls for a new and flexible way of designing, implementing and distributing design software. The Internet provides a flexible manner of offering software access along with methodologies of flexible licensing e.g. on a pay-per-use basis. New communication technologies like ADSL, TV cable of satellites as carriers promise to offer a bandwidth sufficient even for interactive tools with graphical interfaces in the near future. INTERLIDO is an experimental tool suite for process specification and layout verification for lithography based MEMS technologies to be accessed via the Internet. The first version provides a Java implementation even including a graphical editor for process specification. Currently, a new version is brought into operation that is based on JavaBeans component technology. JavaBeans offers the possibility to realize independent interactive design assistants, like a design rule checking assistants, a process consistency checking assistants, a technology definition assistants, a graphical editor assistants, etc. that may reside distributed over the Internet, communicating via Internet protocols. Each potential user thus is able to configure his own dedicated version of a design tool set dedicated to the requirements of the current problem to be solved.

  8. A Tool Supporting Collaborative Data Analytics Workflow Design and Management

    Science.gov (United States)

    Zhang, J.; Bao, Q.; Lee, T. J.

    2016-12-01

    Collaborative experiment design could significantly enhance the sharing and adoption of the data analytics algorithms and models emerged in Earth science. Existing data-oriented workflow tools, however, are not suitable to support collaborative design of such a workflow, to name a few, to support real-time co-design; to track how a workflow evolves over time based on changing designs contributed by multiple Earth scientists; and to capture and retrieve collaboration knowledge on workflow design (discussions that lead to a design). To address the aforementioned challenges, we have designed and developed a technique supporting collaborative data-oriented workflow composition and management, as a key component toward supporting big data collaboration through the Internet. Reproducibility and scalability are two major targets demanding fundamental infrastructural support. One outcome of the project os a software tool, supporting an elastic number of groups of Earth scientists to collaboratively design and compose data analytics workflows through the Internet. Instead of recreating the wheel, we have extended an existing workflow tool VisTrails into an online collaborative environment as a proof of concept.

  9. Design of automation tools for management of descent traffic

    Science.gov (United States)

    Erzberger, Heinz; Nedell, William

    1988-01-01

    The design of an automated air traffic control system based on a hierarchy of advisory tools for controllers is described. Compatibility of the tools with the human controller, a key objective of the design, is achieved by a judicious selection of tasks to be automated and careful attention to the design of the controller system interface. The design comprises three interconnected subsystems referred to as the Traffic Management Advisor, the Descent Advisor, and the Final Approach Spacing Tool. Each of these subsystems provides a collection of tools for specific controller positions and tasks. This paper focuses primarily on the Descent Advisor which provides automation tools for managing descent traffic. The algorithms, automation modes, and graphical interfaces incorporated in the design are described. Information generated by the Descent Advisor tools is integrated into a plan view traffic display consisting of a high-resolution color monitor. Estimated arrival times of aircraft are presented graphically on a time line, which is also used interactively in combination with a mouse input device to select and schedule arrival times. Other graphical markers indicate the location of the fuel-optimum top-of-descent point and the predicted separation distances of aircraft at a designated time-control point. Computer generated advisories provide speed and descent clearances which the controller can issue to aircraft to help them arrive at the feeder gate at the scheduled times or with specified separation distances. Two types of horizontal guidance modes, selectable by the controller, provide markers for managing the horizontal flightpaths of aircraft under various conditions. The entire system consisting of descent advisor algorithm, a library of aircraft performance models, national airspace system data bases, and interactive display software has been implemented on a workstation made by Sun Microsystems, Inc. It is planned to use this configuration in operational

  10. Review of research in feature based design

    NARCIS (Netherlands)

    Salomons, O.W.; van Houten, Frederikus J.A.M.; Kals, H.J.J.

    1993-01-01

    Research in feature-based design is reviewed. Feature-based design is regarded as a key factor towards CAD/CAPP integration from a process planning point of view. From a design point of view, feature-based design offers possibilities for supporting the design process better than current CAD systems

  11. Design tools for computer-generated display of information to operators

    International Nuclear Information System (INIS)

    O'Brien, J.F.; Cain, D.G.; Sun, B.K.H.

    1985-01-01

    More and more computers are being used to process and display information to operators who control nuclear power plants. Implementation of computer-generated displays in power plant control rooms represents a considerable design challenge for industry designers. Over the last several years, the EPRI has conducted research aimed at providing industry designers tools to meet this new design challenge. These tools provide guidance in defining more 'intelligent' information for plant control and in developing effective displays to communicate this information to the operators. (orig./HP)

  12. New evaluation tool now available to assess research quality | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-04-25

    Apr 25, 2016 ... New evaluation tool now available to assess research quality ... Ratings on a scale defined by rubrics, to indicate the level at which a project ... Report: The value-for-money discourse: risks and opportunities for research for development ... Copyright · Open access policy · Privacy policy · Research ethics ...

  13. The Value of Open Source Software Tools in Qualitative Research

    Science.gov (United States)

    Greenberg, Gary

    2011-01-01

    In an era of global networks, researchers using qualitative methods must consider the impact of any software they use on the sharing of data and findings. In this essay, I identify researchers' main areas of concern regarding the use of qualitative software packages for research. I then examine how open source software tools, wherein the publisher…

  14. Design and validation of an improved graphical user interface with the 'Tool ball'.

    Science.gov (United States)

    Lee, Kuo-Wei; Lee, Ying-Chu

    2012-01-01

    The purpose of this research is introduce the design of an improved graphical user interface (GUI) and verifies the operational efficiency of the proposed interface. Until now, clicking the toolbar with the mouse is the usual way to operate software functions. In our research, we designed an improved graphical user interface - a tool ball that is operated by a mouse wheel to perform software functions. Several experiments are conducted to measure the time needed to operate certain software functions with the traditional combination of "mouse click + tool button" and the proposed integration of "mouse wheel + tool ball". The results indicate that the tool ball design can accelerate the speed of operating software functions, decrease the number of icons on the screen, and enlarge the applications of the mouse wheel. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  15. Tool design and materials for electro sinter forging (ESF)

    DEFF Research Database (Denmark)

    Cannella, Emanuele; Nielsen, Chris Valentin

    ) process, the main requirement is the electrical current passing through the electrical conducting powder. To obtain this, a closed-die setup with electrical insulating properties was used. Furthermore, the alignment between the compacting punch and die needed to be ensured by pre-aligning or alternatively...... by using an alignment system. The present work is focused on the designing phase of a tool for the electro sinter forging of a disc, made from titanium powder. By applying a pre-alignment system, the setup resulted suitable for this application. A tool design for sintering rings is also showed....

  16. Design Tool for Direct Drive Wind Turbine Generators

    DEFF Research Database (Denmark)

    Leban, Krisztina Monika

    . A comparison of the selected machine types in view of up-scaling to 20 [MW] was performed. As an example fitness criterion, the use of active materials for the generators was considered. Based on this, suggestions for 20 [MW] generators were made. The results are discussed and future work, directions......The current work offers a comparison of the proposed machine geometries for 6 [MW] direct drive wind generator candidates with the prospective of up scaling to 20MW. The suggestions are based on a design tool especially built for this investigation. The in-built flexibility of the design tool gives...

  17. Aerodynamics Research Revolutionizes Truck Design

    Science.gov (United States)

    2008-01-01

    During the 1970s and 1980s, researchers at Dryden Flight Research Center conducted numerous tests to refine the shape of trucks to reduce aerodynamic drag and improved efficiency. During the 1980s and 1990s, a team based at Langley Research Center explored controlling drag and the flow of air around a moving body. Aeroserve Technologies Ltd., of Ottawa, Canada, with its subsidiary, Airtab LLC, in Loveland, Colorado, applied the research from Dryden and Langley to the development of the Airtab vortex generator. Airtabs create two counter-rotating vortices to reduce wind resistance and aerodynamic drag of trucks, trailers, recreational vehicles, and many other vehicles.

  18. Research Tools and Materials | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Research Tools can be found in TTC's Available Technologies and in scientific publications. They are freely available to non-profits and universities through a Material Transfer Agreement (or other appropriate mechanism), and available via licensing to companies.

  19. DESIGN OF A SUPERBIKE PADDOCK STAND USING CAD AND CAE TOOLS

    Directory of Open Access Journals (Sweden)

    M.H. Mohd Noh

    2012-06-01

    Full Text Available Two people are required to operate current superbike paddock stands in order to elevate the superbike. Lifting the superbike alone using the current design of paddock stand may be impractical and inconvenient for users. To overcome this limitation, a new design of a superbike paddock stand was conceived that could be operated by a single user. CAD and CAE tools using CATIA V5R18 software were utilised in designing this new stand. A 3D CAD model was developed and analysed through finite element analysis (FEA and a prototype fabricated for verification testing of the design. The use of CAD and CAE tools saved much time in the design work and gave the researchers and designers freedom in producing their own design. However, the most important aspect of this design study was to design a superbike paddock stand that is more practical and convenient for operation by a single user.

  20. Using Developmental Evaluation as a Design Thinking Tool for Curriculum Innovation in Professional Higher Education

    Science.gov (United States)

    Leonard, Simon N.; Fitzgerald, Robert N.; Riordan, Geoffrey

    2016-01-01

    This paper argues for the use of "developmental" evaluation as a design-based research tool for sustainable curriculum innovation in professional higher education. Professional education is multi-faceted and complex with diverse views from researchers, professional practitioners, employers and the world of politics leaving little…

  1. Using smartphones in survey research: a multifunctional tool

    OpenAIRE

    Nathalie Sonck; Henk Fernee

    2013-01-01

    Smartphones and apps offer an innovative means of collecting data from the public. The Netherlands Institute for Social Research | SCP has been engaged in one of the first experiments involving the use of a smartphone app to collect time use data recorded by means of an electronic diary. Is it feasible to use smartphones as a data collection tool for social research? What are the effects on data quality? Can we also incorporate reality mining tools in the smartphone app to replace traditional...

  2. New tools for the simulation and design of calorimeters

    International Nuclear Information System (INIS)

    Womersley, W.J.

    1989-01-01

    Two new approaches to the simulation and design of large hermetic calorimeters are presented. Firstly, the Shower Library scheme used in the fast generation of showers in the Monte Carlo of the calorimeter for the D-Zero experiment at the Fermilab Tevatron is described. Secondly, a tool for the design future calorimeters is described, which can be integrated with a computer aided design system to give engineering designers an immediate idea of the relative physics capabilities of different geometries. 9 refs., 6 figs., 1 tab

  3. The mechanical design of a transfemoral prosthesis using computational tools and design methodology

    Directory of Open Access Journals (Sweden)

    John Sánchez Otero

    2012-09-01

    Full Text Available Artificial limb replacement with lower limb prostheses has been widely reported in current scientific literature. There are many lower limb prosthetic designs ranging from a single-axis knee mechanism to complex mechanisms involving microcontrollers, made from many materials ranging from lightweight, high specific strength ones (e.g., carbon fibre to traditional forms (e.g., stainless steel. However, the challenge is to design prostheses whose movement resembles the human body’s natural movement as closely as possible. Advances in prosthetics have enabled many amputees to return to their everyday activities; however, such prostheses are expensive, some costing as much as $60,000. Many of the affected population in Colombia have scarce economic resources; there is therefore a need to develop affordable functional prostheses.The Universidad del Norte’s Materials, Processes and Design Research Group and the Robotics and Intelligent Systems Group have been working on this line of research to develop modular prostheses which can be adjusted to each patient’s requirements. This research represents an initial methodological approach to developing a prosthesis in which software tools have been used (the finite element method with a criteria relationship matrix for selecting the best alternative while considering different aspects such as mod-ularity, cost, stiffness and weight.

  4. Design Research: Aesthetic Epistemology and Explanatory Knowledge

    Directory of Open Access Journals (Sweden)

    Peter Murphy

    Full Text Available The article explores the “what” and the “how” of design research. It discusses the epistemological assumptions of design and design research—the conception of true knowledge that underpins the quest to advance design knowledge through research. The article also examines the media and methods of doing design research—that is, the “how” of such research. As it developed over the past century, the design field has drawn extensively on three pivotal but often tacitly deployed epistemologies: the Platonic-Aristotelian, the pragmatic, and the postmodern. Platonic epistemology is latent in many commonplace design instruction texts. Pragmatic epistemology underscores the industrial-arts ethos of design. Postmodern epistemologies dominate in university programs—especially graduate and Ph.D. programs. The article considers how these competing epistemologies understand the role of imagination in the act of creation. The article then considers the role of explanation in the carrying out of research in creative design and arts fields. It addresses whether, and to what degree, design research ought to rely on explanatory words as its principal medium of research, or whether it is valid to substitute artifactual creation for intellectual explanation in the research process. Key words: Epistemology, Design, Imagination, Knowledge, Explanation, Practice-based research

  5. Aligning Web-Based Tools to the Research Process Cycle: A Resource for Collaborative Research Projects

    Science.gov (United States)

    Price, Geoffrey P.; Wright, Vivian H.

    2012-01-01

    Using John Creswell's Research Process Cycle as a framework, this article describes various web-based collaborative technologies useful for enhancing the organization and efficiency of educational research. Visualization tools (Cacoo) assist researchers in identifying a research problem. Resource storage tools (Delicious, Mendeley, EasyBib)…

  6. Analytical Modelling Of Milling For Tool Design And Selection

    International Nuclear Information System (INIS)

    Fontaine, M.; Devillez, A.; Dudzinski, D.

    2007-01-01

    This paper presents an efficient analytical model which allows to simulate a large panel of milling operations. A geometrical description of common end mills and of their engagement in the workpiece material is proposed. The internal radius of the rounded part of the tool envelope is used to define the considered type of mill. The cutting edge position is described for a constant lead helix and for a constant local helix angle. A thermomechanical approach of oblique cutting is applied to predict forces acting on the tool and these results are compared with experimental data obtained from milling tests on a 42CrMo4 steel for three classical types of mills. The influence of some tool's geometrical parameters on predicted cutting forces is presented in order to propose optimisation criteria for design and selection of cutting tools

  7. A new design of automatic vertical drilling tool

    Directory of Open Access Journals (Sweden)

    Yanfeng Ma

    2015-09-01

    Full Text Available In order to effectively improve penetration rates and enhance wellbore quality for vertical wells, a new Automatic Vertical Drilling Tool (AVDT based on Eccentric Braced Structure (EBS is designed. Applying operating principle of rotary steering drilling, AVDT adds offset gravity block automatic induction inclination mechanism. When hole straightening happens, tools take essentric moment to be produced by gravity of offset gravity lock to control the bearing of guide force, so that well straightening is achieved. The normal tool's size of the AVDT is designed as 215.9 mm,other major components' sizes are worked out by the result of theoretical analysis, including the offset angle of EBS. This paper aims to introduce the structure, operating principle, theoretical analysis and describe the key components' parameters setting of the AVDT.

  8. Automatic differentiation as a tool in engineering design

    Science.gov (United States)

    Barthelemy, Jean-Francois; Hall, Laura E.

    1992-01-01

    Automatic Differentiation (AD) is a tool that systematically implements the chain rule of differentiation to obtain the derivatives of functions calculated by computer programs. AD is assessed as a tool for engineering design. The forward and reverse modes of AD, their computing requirements, as well as approaches to implementing AD are discussed. The application of two different tools to two medium-size structural analysis problems to generate sensitivity information typically necessary in an optimization or design situation is also discussed. The observation is made that AD is to be preferred to finite differencing in most cases, as long as sufficient computer storage is available; in some instances, AD may be the alternative to consider in lieu of analytical sensitivity analysis.

  9. Serious Games are a Serious Tool for Team Research

    Directory of Open Access Journals (Sweden)

    Michael D. Coovert

    2017-03-01

    Full Text Available Serious games are an attractive tool for education and training, but their utility is even broader. We argue serious games provide a unique opportunity for research as well, particularly in areas where multiple players (groups or teams are involved. In our paper we provide background in several substantive areas. First, we outline major constructs and challenges found in team research. Secondly, we discuss serious games, providing an overview and description of their role in education, training, and research. Thirdly, we describe necessary characteristics for game engines utilized in team research, followed by a discussion of the value added by utilizing serious games. Our goal in this paper is to argue serious games are an effective tool with demonstrated reliability and validity and should be part of a research program for those engaged in team research. Both team researchers and those involved in serious game development can benefit from a mutual partnership which is research focused.

  10. Validation of a new assessment tool for qualitative research articles

    DEFF Research Database (Denmark)

    Schou, Lone; Høstrup, Helle; Lyngsø, Elin

    2012-01-01

    schou l., høstrup h., lyngsø e.e., larsen s. & poulsen i. (2011) Validation of a new assessment tool for qualitative research articles. Journal of Advanced Nursing00(0), 000-000. doi: 10.1111/j.1365-2648.2011.05898.x ABSTRACT: Aim.  This paper presents the development and validation of a new...... assessment tool for qualitative research articles, which could assess trustworthiness of qualitative research articles as defined by Guba and at the same time aid clinicians in their assessment. Background.  There are more than 100 sets of proposals for quality criteria for qualitative research. However, we...... is the Danish acronym for Appraisal of Qualitative Studies. Phase 1 was to develop the tool based on a literature review and on consultation with qualitative researchers. Phase 2 was an inter-rater reliability test in which 40 health professionals participated. Phase 3 was an inter-rater reliability test among...

  11. Embodying embodied design research techniques

    DEFF Research Database (Denmark)

    Wilde, Danielle; Tomico, Oscar; Lucero, Andrés

    2015-01-01

    The value of engaging the full gamut of sensory motor skills in the design and use of smart objects and systems is increasingly recognized. Yet methods for arriving at robust and reliable outcomes for their development are not fully understood, nor are they easily reported or transferred through ...

  12. Design tool for offgrid hydrogen refuelling systems for aerospace applications

    International Nuclear Information System (INIS)

    Troncoso, E.; Lapeña-Rey, N.; Gonzalez, M.

    2016-01-01

    Highlights: • A simulation tool for offgrid CPV-based hydrogen refuelling systems is presented. • Simulations of system configurations with specific UAS hydrogen demand scenarios. • Regarding system size & reliability the most critical components are the CPV array and batteries. • In terms of energy efficiency the most critical component is the electrolyser. - Abstract: To develop an environmentally acceptable refuelling solution for fuel cell-powered unmanned aerial systems (UASs) to operate in remote areas, hydrogen fuel must be produced on-site from renewable energy sources. This paper describes a Matlab-based simulation tool specifically developed to pre-design offgrid hydrogen refuelling systems for UAS applications. The refuelling system comprises a high concentrated PV array (CPV), an electrolyser, a hydrogen buffer tank and a diaphragm hydrogen compressor. Small composite tanks are also included for fast refuelling of the UAV platforms at any time during the year. The novel approach of selecting a CPV power source is justified on the basis of minimizing the system footprint (versus flat plat or low concentration PV), aiming for a containerized remotely deployable UAS offgrid refuelling solution. To validate the simulation tool a number of simulations were performed using experimental data from a prototype offgrid hydrogen refuelling station for UAVs developed by Boeing Research & Technology Europe. Solar irradiation data for a selected location and daily UAS hydrogen demands of between 2.8 and 15.8 Nm"3 were employed as the primary inputs, in order to calculate a recommended system sizing solution and assess the expected operation of the refuelling system across a given year. The specific energy consumption of the refuelling system obtained from the simulations is between 5.6 and 8.9 kW h_e per kg of hydrogen delivered to the UAVs, being lower for larger daily hydrogen demands. Increasing the CPV area and electrolyser size in order to supply higher

  13. Structure for Categorization of EcoDesign Methods and Tools

    OpenAIRE

    Lindahl, Mattias; Ekermann, Sara

    2013-01-01

    This edited volume presents the proceedings of the 20th CIRP LCE Conference, which cover various areas in life cycle engineering such as life cycle design, end-of-life management, manufacturing processes, manufacturing systems, methods and tools for sustainability, social sustainability, supply chain management, remanufacturing,

  14. Use of Software Tools in Teaching Relational Database Design.

    Science.gov (United States)

    McIntyre, D. R.; And Others

    1995-01-01

    Discusses the use of state-of-the-art software tools in teaching a graduate, advanced, relational database design course. Results indicated a positive student response to the prototype of expert systems software and a willingness to utilize this new technology both in their studies and in future work applications. (JKP)

  15. On Computational Fluid Dynamics Tools in Architectural Design

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Hougaard, Mads; Stærdahl, Jesper Winther

    engineering computational fluid dynamics (CFD) simulation program ANSYS CFX and a CFD based representative program RealFlow are investigated. These two programs represent two types of CFD based tools available for use during phases of an architectural design process. However, as outlined in two case studies...

  16. Remediating a Design Tool: Implications of Digitizing Sticky Notes

    DEFF Research Database (Denmark)

    Jensen, Mads Møller; Rädle, Roman; Klokmose, Clemens Nylandsted

    2018-01-01

    digital sticky notes setup. The paper contributes with a nuanced understanding of what happens when remediating a physical design tool into digital space, by emphasizing focus shifts and breakdowns caused by the technology, but also benefits and promises inherent in the digital media. Despite users...... their use and understanding, yielding new concerns regarding cross-device transfer and collaboration....

  17. Design principles of a web interface for monitoring tools

    International Nuclear Information System (INIS)

    Aiftimiei, C; Pra, S D; Fantinel, S; Andreozzi, S; Fattibene, E; Misurelli, G; Cuscela, G; Donvito, G; Dudhalkar, V; Maggi, G; Pierro, A

    2008-01-01

    A monitoring tool of a complex Grid system can gather a huge amount of information that have to be presented to the users in the most comprehensive way. Moreover different types of consumers could be interested in inspecting and analyzing different subsets of data. The main goal in designing a Web interface for the presentation of monitoring information is to organize the huge amount of data in a simple, user-friendly and usable structure. One more problem is to consider different approaches, skills and interests that all the possible categories of users have in looking for the desired information. Starting from the Information Architecture guidelines for the Web, it is possible to design Web interfaces towards a closer user experience and to deal with an advanced user interaction through the implementation of many Web standard technologies. In this paper, we will present a number of principles for the design of Web interface for monitoring tools that provide a wider, richer range of possibilities for what concerns the user interaction. These principles are based on an extensive review of the current literature in Web design and on the experience with the development of the GridICE monitoring tool. The described principles can drive the evolution of the Web interface of Grid monitoring tools

  18. The Design of Tools for Sketching Sensor-Based Interaction

    DEFF Research Database (Denmark)

    Brynskov, Martin; Lunding, Rasmus; Vestergaard, Lasse Steenbock

    2012-01-01

    , flexibility and cost, aimed at wearable and ultra-mobile prototyping where fast reaction is needed (e.g. in controlling sound), and we discuss the general issues facing this category of embodied interaction design tools. We then present the platform in more detail, both regarding hard- ware and software...

  19. Design tool for the thermal energy potential of asphalt pavements

    NARCIS (Netherlands)

    Loomans, M.G.L.C.; Oversloot, H.P.; Bondt, A. de; Jansen, R.; Rij, H. van

    2003-01-01

    This paper describes the development of a design tool for the calculation of the thermal energy potential of a so-called asphalt collector. Two types of numerical models have been developed and validated against experimental results from a full-scale test-site. The validation showed to be a tedious

  20. Logical Framework Analysis (LFA): An Essential Tool for Designing ...

    African Journals Online (AJOL)

    Evaluation of a project at any stage of its life cycle, especially at its planning stage, is necessary for its successful execution and completion. The Logical Framework Analysis or the Logical Framework Approach (LFA) is an essential tool in designing such evaluation because it is a process that serves as a reference guide in ...

  1. Software tools to aid Pascal and Ada program design

    Energy Technology Data Exchange (ETDEWEB)

    Jankowitz, H.T.

    1987-01-01

    This thesis describes a software tool which analyses the style and structure of Pascal and Ada programs by ensuring that some minimum design requirements are fulfilled. The tool is used in much the same way as a compiler is used to teach students the syntax of a language, only in this case issues related to the design and structure of the program are of paramount importance. The tool operates by analyzing the design and structure of a syntactically correct program, automatically generating a report detailing changes that need to be made in order to ensure that the program is structurally sound. The author discusses how the model gradually evolved from a plagiarism detection system which extracted several measurable characteristics in a program to a model that analyzed the style of Pascal programs. In order to incorporate more-sophistical concepts like data abstraction, information hiding and data protection, this model was then extended to analyze the composition of Ada programs. The Ada model takes full advantage of facilities offered in the language and by using this tool the standard and quality of written programs is raised whilst the fundamental principles of program design are grasped through a process of self-tuition.

  2. Research reactors: a tool for science and medicine

    International Nuclear Information System (INIS)

    Ordonez, Juan

    2001-01-01

    The types and uses of research reactors are reviewed. After an analysis of the world situation, the demand of new research reactors of about 20 MW is foreseen. The experience and competitiveness of INVAP S.E. as designer and constructor of research reactors is outlined and the general specifications of the reactors designed by INVAP for Egypt and Australia are given

  3. Analytical Modeling Tool for Design of Hydrocarbon Sensitive Optical Fibers

    Directory of Open Access Journals (Sweden)

    Khalil Al Handawi

    2017-09-01

    Full Text Available Pipelines are the main transportation means for oil and gas products across large distances. Due to the severe conditions they operate in, they are regularly inspected using conventional Pipeline Inspection Gages (PIGs for corrosion damage. The motivation for researching a real-time distributed monitoring solution arose to mitigate costs and provide a proactive indication of potential failures. Fiber optic sensors with polymer claddings provide a means of detecting contact with hydrocarbons. By coating the fibers with a layer of metal similar in composition to that of the parent pipeline, corrosion of this coating may be detected when the polymer cladding underneath is exposed to the surrounding hydrocarbons contained within the pipeline. A Refractive Index (RI change occurs in the polymer cladding causing a loss in intensity of a traveling light pulse due to a reduction in the fiber’s modal capacity. Intensity losses may be detected using Optical Time Domain Reflectometry (OTDR while pinpointing the spatial location of the contact via time delay calculations of the back-scattered pulses. This work presents a theoretical model for the above sensing solution to provide a design tool for the fiber optic cable in the context of hydrocarbon sensing following corrosion of an external metal coating. Results are verified against the experimental data published in the literature.

  4. Analytical Modeling Tool for Design of Hydrocarbon Sensitive Optical Fibers.

    Science.gov (United States)

    Al Handawi, Khalil; Vahdati, Nader; Shiryayev, Oleg; Lawand, Lydia

    2017-09-28

    Pipelines are the main transportation means for oil and gas products across large distances. Due to the severe conditions they operate in, they are regularly inspected using conventional Pipeline Inspection Gages (PIGs) for corrosion damage. The motivation for researching a real-time distributed monitoring solution arose to mitigate costs and provide a proactive indication of potential failures. Fiber optic sensors with polymer claddings provide a means of detecting contact with hydrocarbons. By coating the fibers with a layer of metal similar in composition to that of the parent pipeline, corrosion of this coating may be detected when the polymer cladding underneath is exposed to the surrounding hydrocarbons contained within the pipeline. A Refractive Index (RI) change occurs in the polymer cladding causing a loss in intensity of a traveling light pulse due to a reduction in the fiber's modal capacity. Intensity losses may be detected using Optical Time Domain Reflectometry (OTDR) while pinpointing the spatial location of the contact via time delay calculations of the back-scattered pulses. This work presents a theoretical model for the above sensing solution to provide a design tool for the fiber optic cable in the context of hydrocarbon sensing following corrosion of an external metal coating. Results are verified against the experimental data published in the literature.

  5. Research on Test-bench for Sonic Logging Tool

    Directory of Open Access Journals (Sweden)

    Xianping Liu

    2016-01-01

    Full Text Available In this paper, the test-bench for sonic logging tool is proposed and designed to realize automatic calibration and testing of the sonic logging tool. The test-bench System consists of Host Computer, Embedded Controlling Board, and functional boards. The Host Computer serves as the Human Machine Interface (HMI and processes uploaded data. The software running on Host Computer is designed on VC++, which is developed based on multithreading, Dynamic Linkable Library (DLL and Multiple Document Interface (MDI techniques. The Embedded Controlling Board uses ARM7 as the microcontroller and communicates with Host Computer via Ethernet. The Embedded Controlling Board software is realized based on embedded uclinux operating system with a layered architecture. The functional boards are designed based on Field Programmable Gate Array (FPGA and provide test interfaces for the logging tool. The functional board software is divided into independent sub-modules that can repeatedly be used by various functional boards and then integrated those sub-modules in the top layer. With the layered architecture and modularized design, the software system is highly reliable and extensible. With the help of designed system, a test has been conducted quickly and successfully on the electronic receiving cabin of the sonic logging tool. It demonstrated that the system could greatly improve the production efficiency of the sonic logging tool.

  6. Status of Conceptual Design Progress for ITER Sector Sub-assembly Tools

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Kyoung O; Park, Hyun Ki; Kim, Dong Jin [National Fusion Research Institute, Daejeon (Korea, Republic of); Lee, Jae Hyuk; Kim, Kyung Kyu [SFA Engineering Corp., Changwon (Korea, Republic of); Im, Ki Hak; Robert, Shaw [ITER Organization, Paul lez Durance (France)

    2010-05-15

    The ITER (International Thermonuclear Experimental Reactor) Tokamak assembly tools are purpose-built tools to complete the ITER Tokamak machine which includes the cryostat and the components contained therein. Based on the design description document prepared by the ITER organization, Korea has carried out the conceptual design of assembly tools. The 40 .deg. sector assemblies sub-assembled at assembly hall are transferred to Tokamak hall using the lifting tool operated by Tokamak main cranes. In-pit assembly tools are the purpose-built assembly tools for the completion of final sector assembly at Tokamak hall. The 40 .deg. sector sub-assembly tools are composed of the upending tool, the sector sub-assembly tool, the sector lifting tool and the vacuum vessel support and bracing tools. The process of the ITER sector sub-assembly at assembly hall and status of research and development are described in this paper. The ITER Tokamak device is composed of 9 vacuum vessel (VV)/toroidal field coils (TFCs)/vacuum vessel thermal shields (VVTS) 40 .deg. sectors. Each VV/TFCs/VVTS 40 .deg. sector is made up of one 40 .deg. VV, two 20 .deg. TFCs and associated VVTS segments. The 40 .deg. sectors are sub-assembled at assembly hall respectively and then 9 sectors which sub-assembled at assembly hall are finally assembled at Tokamak hall. As a basic assembly component, the assembly strategy and tools for the 40 .deg. sector sub-assembly and final assembly at inpit should be developed to satisfy the basic assembly requirements of the ITER Tokamak device. Accordingly, the purpose-built assembly tools should be designed and manufactured considering assembly plan, available space, safety, easy operation, efficient maintenance, and so on. The 40 .deg. sector assembly tools are classified into 2 groups. One group is the sub-assembly tools including upending tool, lifting tool, sub-assembly tool, VV supports and bracing tools used at assembly hall and the other group is the in

  7. A Thermoelastic Hydraulic Fracture Design Tool for Geothermal Reservoir Development

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad Ghassemi

    2003-06-30

    Geothermal energy is recovered by circulating water through heat exchange areas within a hot rock mass. Geothermal reservoir rock masses generally consist of igneous and metamorphic rocks that have low matrix permeability. Therefore, cracks and fractures play a significant role in extraction of geothermal energy by providing the major pathways for fluid flow and heat exchange. Thus, knowledge of conditions leading to formation of fractures and fracture networks is of paramount importance. Furthermore, in the absence of natural fractures or adequate connectivity, artificial fracture are created in the reservoir using hydraulic fracturing. At times, the practice aims to create a number of parallel fractures connecting a pair of wells. Multiple fractures are preferred because of the large size necessary when using only a single fracture. Although the basic idea is rather simple, hydraulic fracturing is a complex process involving interactions of high pressure fluid injections with a stressed hot rock mass, mechanical interaction of induced fractures with existing natural fractures, and the spatial and temporal variations of in-situ stress. As a result it is necessary to develop tools that can be used to study these interactions as an integral part of a comprehensive approach to geothermal reservoir development, particularly enhanced geothermal systems. In response to this need we have set out to develop advanced thermo-mechanical models for design of artificial fractures and rock fracture research in geothermal reservoirs. These models consider the significant hydraulic and thermo-mechanical processes and their interaction with the in-situ stress state. Wellbore failure and fracture initiation is studied using a model that fully couples poro-mechanical and thermo-mechanical effects. The fracture propagation model is based on a complex variable and regular displacement discontinuity formulations. In the complex variable approach the displacement discontinuities are

  8. Development of a software tool and criteria evaluation for efficient design of small interfering RNA

    International Nuclear Information System (INIS)

    Chaudhary, Aparna; Srivastava, Sonam; Garg, Sanjeev

    2011-01-01

    Research highlights: → The developed tool predicted siRNA constructs with better thermodynamic stability and total score based on positional and other criteria. → Off-target silencing below score 30 were observed for the best siRNA constructs for different genes. → Immunostimulation and cytotoxicity motifs considered and penalized in the developed tool. → Both positional and compositional criteria were observed to be important. -- Abstract: RNA interference can be used as a tool for gene silencing mediated by small interfering RNAs (siRNA). The critical step in effective and specific RNAi processing is the selection of suitable constructs. Major design criteria, i.e., Reynolds's design rules, thermodynamic stability, internal repeats, immunostimulatory motifs were emphasized and implemented in the siRNA design tool. The tool provides thermodynamic stability score, GC content and a total score based on other design criteria in the output. The viability of the tool was established with different datasets. In general, the siRNA constructs produced by the tool had better thermodynamic score and positional properties. Comparable thermodynamic scores and better total scores were observed with the existing tools. Moreover, the results generated had comparable off-target silencing effect. Criteria evaluations with additional criteria were achieved in WEKA.

  9. Eindhoven school for technological design : design education and design research

    NARCIS (Netherlands)

    Trum, H.M.G.J.; Oxman, R.M.; Bax, M.F.Th.

    1995-01-01

    Nine years after starting the two-year post-graduate programme on technological design [Ackermans and Trum, 1988], Eindhoven University of Technology (EUT) decided to enhance the development of synthesis-oriented engineering education by establishing a post-graduate school for technological design.

  10. Research on conceptual design of mechatronic systems

    Indian Academy of Sciences (India)

    tems/components on holistic dynamic performance of mechatronic systems ... Conceptual design is a typical ill-definition solving problem. ..... Li R 2004 Research on theory and method of scheme creative design of mechatronic system. School.

  11. A Shape Optimization Study for Tool Design in Resistance Welding

    DEFF Research Database (Denmark)

    Bogomolny, Michael; Bendsøe, Martin P.; Hattel, Jesper Henri

    2009-01-01

    The purpose of this study is to apply shape optimization tools for design of resistance welding electrodes. The numerical simulation of the welding process has been performed by a simplified FEM model implemented in COMSOL. The design process is formulated as an optimization problem where...... the objective is to prolong the life-time of the electrodes. Welding parameters like current, time and electrode shape parameters are selected to be the design variables while constraints are chosen to ensure a high quality of the welding. Surrogate models based on a Kriging approximation has been used in order...

  12. Equipment and special tool design for remote maintenance

    International Nuclear Information System (INIS)

    Northey, L.M.; Thomson, J.D.

    1985-01-01

    Maintenance tasks performed in locations with hostile environments and/or limited space accesses often require equipment that is operated remotely. This paper discusses considerations that should be addressed in the design of remote maintenance equipment. Some of the topics include proper material selection, interface identifications, operational feedback devices and cost limitations. These considerations add ''human engineering'' to the equipment design to assure protection of the tool and the operating personnel. Examples of remote maintenance and inspection systems that were developed by the Westinghouse Hanford Company and that utilize many of these design considerations are included

  13. Process Improvement Through Tool Integration in Aero-Mechanical Design

    Science.gov (United States)

    Briggs, Clark

    2010-01-01

    Emerging capabilities in commercial design tools promise to significantly improve the multi-disciplinary and inter-disciplinary design and analysis coverage for aerospace mechanical engineers. This paper explores the analysis process for two example problems of a wing and flap mechanical drive system and an aircraft landing gear door panel. The examples begin with the design solid models and include various analysis disciplines such as structural stress and aerodynamic loads. Analytical methods include CFD, multi-body dynamics with flexible bodies and structural analysis. Elements of analysis data management, data visualization and collaboration are also included.

  14. Research on the tool holder mode in high speed machining

    Science.gov (United States)

    Zhenyu, Zhao; Yongquan, Zhou; Houming, Zhou; Xiaomei, Xu; Haibin, Xiao

    2018-03-01

    High speed machining technology can improve the processing efficiency and precision, but also reduce the processing cost. Therefore, the technology is widely regarded in the industry. With the extensive application of high-speed machining technology, high-speed tool system has higher and higher requirements on the tool chuck. At present, in high speed precision machining, several new kinds of clip heads are as long as there are heat shrinkage tool-holder, high-precision spring chuck, hydraulic tool-holder, and the three-rib deformation chuck. Among them, the heat shrinkage tool-holder has the advantages of high precision, high clamping force, high bending rigidity and dynamic balance, etc., which are widely used. Therefore, it is of great significance to research the new requirements of the machining tool system. In order to adapt to the requirement of high speed machining precision machining technology, this paper expounds the common tool holder technology of high precision machining, and proposes how to select correctly tool clamping system in practice. The characteristics and existing problems are analyzed in the tool clamping system.

  15. Design tool for TOF and SL based 3D cameras.

    Science.gov (United States)

    Bouquet, Gregory; Thorstensen, Jostein; Bakke, Kari Anne Hestnes; Risholm, Petter

    2017-10-30

    Active illumination 3D imaging systems based on Time-of-flight (TOF) and Structured Light (SL) projection are in rapid development, and are constantly finding new areas of application. In this paper, we present a theoretical design tool that allows prediction of 3D imaging precision. Theoretical expressions are developed for both TOF and SL imaging systems. The expressions contain only physically measurable parameters and no fitting parameters. We perform 3D measurements with both TOF and SL imaging systems, showing excellent agreement between theoretical and measured distance precision. The theoretical framework can be a powerful 3D imaging design tool, as it allows for prediction of 3D measurement precision already in the design phase.

  16. Spec Tool; an online education and research resource

    Science.gov (United States)

    Maman, S.; Shenfeld, A.; Isaacson, S.; Blumberg, D. G.

    2016-06-01

    Education and public outreach (EPO) activities related to remote sensing, space, planetary and geo-physics sciences have been developed widely in the Earth and Planetary Image Facility (EPIF) at Ben-Gurion University of the Negev, Israel. These programs aim to motivate the learning of geo-scientific and technologic disciplines. For over the past decade, the facility hosts research and outreach activities for researchers, local community, school pupils, students and educators. As software and data are neither available nor affordable, the EPIF Spec tool was created as a web-based resource to assist in initial spectral analysis as a need for researchers and students. The tool is used both in the academic courses and in the outreach education programs and enables a better understanding of the theoretical data of spectroscopy and Imaging Spectroscopy in a 'hands-on' activity. This tool is available online and provides spectra visualization tools and basic analysis algorithms including Spectral plotting, Spectral angle mapping and Linear Unmixing. The tool enables to visualize spectral signatures from the USGS spectral library and additional spectra collected in the EPIF such as of dunes in southern Israel and from Turkmenistan. For researchers and educators, the tool allows loading collected samples locally for further analysis.

  17. Applied statistical designs for the researcher

    CERN Document Server

    Paulson, Daryl S

    2003-01-01

    Research and Statistics Basic Review of Parametric Statistics Exploratory Data Analysis Two Sample Tests Completely Randomized One-Factor Analysis of Variance One and Two Restrictions on Randomization Completely Randomized Two-Factor Factorial Designs Two-Factor Factorial Completely Randomized Blocked Designs Useful Small Scale Pilot Designs Nested Statistical Designs Linear Regression Nonparametric Statistics Introduction to Research Synthesis and "Meta-Analysis" and Conclusory Remarks References Index.

  18. 6th International Conference on Research into Design

    CERN Document Server

    Chakrabarti, Debkumar; ICoRD 2017; Research into design for communities

    2017-01-01

    This book showcases cutting-edge research papers from the 6th International Conference on Research into Design (ICoRD 2017) – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design for communities. While design traditionally focused on the development of products for the individual, the emerging consensus on working towards a more sustainable world demands greater attention to designing for and with communities, so as to promote their sustenance and harmony - within each community and across communities. The special features of the book are the insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the...

  19. Experiential design landscapes: design research in the wild

    NARCIS (Netherlands)

    Peeters, M.M.R.; Megens, C.J.P.G.; IJsselsteijn, W.A.; Hummels, C.C.M.; Brombacher, A.C.; Brandt, E.; Ehn, P.; Johansson, T.; Johansson, T.D.; Hellström Reimer, M.; Markussen, T.; Vallgårda, A.

    2013-01-01

    Thanks to the emergence of new sensing and behaviour tracking technologies, design research can take place anywhere and anytime in the real world. When doing design research, a trade-off has to be made between experimental control and ecological validity. In this paper, we compare Experiential

  20. Architectural design and the collaborative research environment.

    Science.gov (United States)

    Goldstein, Roger N

    2006-10-20

    Given that science is a collaborative endeavor, architects are striving to design new research buildings that not only provide a more pleasant work space but also facilitate interactions among researchers.

  1. A simulator-independent optimization tool based on genetic algorithm applied to nuclear reactor design

    International Nuclear Information System (INIS)

    Abreu Pereira, Claudio Marcio Nascimento do; Schirru, Roberto; Martinez, Aquilino Senra

    1999-01-01

    Here is presented an engineering optimization tool based on a genetic algorithm, implemented according to the method proposed in recent work that has demonstrated the feasibility of the use of this technique in nuclear reactor core designs. The tool is simulator-independent in the sense that it can be customized to use most of the simulators which have the input parameters read from formatted text files and the outputs also written from a text file. As the nuclear reactor simulators generally use such kind of interface, the proposed tool plays an important role in nuclear reactor designs. Research reactors may often use non-conventional design approaches, causing different situations that may lead the nuclear engineer to face new optimization problems. In this case, a good optimization technique, together with its customizing facility and a friendly man-machine interface could be very interesting. Here, the tool is described and some advantages are outlined. (author)

  2. An Open-Source Tool Set Enabling Analog-Digital-Software Co-Design

    Directory of Open Access Journals (Sweden)

    Michelle Collins

    2016-02-01

    Full Text Available This paper presents an analog-digital hardware-software co-design environment for simulating and programming reconfigurable systems. The tool simulates, designs, as well as enables experimental measurements after compiling to configurable systems in the same integrated design tool framework. High level software in Scilab/Xcos (open-source programs similar to MATLAB/Simulink that converts the high-level block description by the user to blif format (sci2blif, which acts as an input to the modified VPR tool, including the code v p r 2 s w c s , encoding the specific platform through specific architecture files, resulting in a targetable switch list on the resulting configurable analog–digital system. The resulting tool uses an analog and mixed-signal library of components, enabling users and future researchers access to the basic analog operations/computations that are possible.

  3. Social Media Resources for Participative Design Research

    OpenAIRE

    Qaed, Fatema; Briggs, Jo; Cockton, Gilbert

    2016-01-01

    We present our experiences of novel value from online social media for Participative Design (PD) research. We describe how particular social media (e.g. Facebook, Pinterest, WhatsApp and Twitter) were used during a five-year project on learning space design by the researcher and interested teachers across all research phases (contextual review, user studies, PD action research). Social media were used to source and share comments, photographs and video documentation, supporting participation ...

  4. Enabling laboratory EUV research with a compact exposure tool

    Science.gov (United States)

    Brose, Sascha; Danylyuk, Serhiy; Tempeler, Jenny; Kim, Hyun-su; Loosen, Peter; Juschkin, Larissa

    2016-03-01

    In this work we present the capabilities of the designed and realized extreme ultraviolet laboratory exposure tool (EUVLET) which has been developed at the RWTH-Aachen, Chair for the Technology of Optical Systems (TOS), in cooperation with the Fraunhofer Institute for Laser Technology (ILT) and Bruker ASC GmbH. Main purpose of this laboratory setup is the direct application in research facilities and companies with small batch production, where the fabrication of high resolution periodic arrays over large areas is required. The setup can also be utilized for resist characterization and evaluation of its pre- and post-exposure processing. The tool utilizes a partially coherent discharge produced plasma (DPP) source and minimizes the number of other critical components to a transmission grating, the photoresist coated wafer and the positioning system for wafer and grating and utilizes the Talbot lithography approach. To identify the limits of this approach first each component is analyzed and optimized separately and relations between these components are identified. The EUV source has been optimized to achieve the best values for spatial and temporal coherence. Phase-shifting and amplitude transmission gratings have been fabricated and exposed. Several commercially available electron beam resists and one EUV resist have been characterized by open frame exposures to determine their contrast under EUV radiation. Cold development procedure has been performed to further increase the resist contrast. By analyzing the exposure results it can be demonstrated that only a 1:1 copy of the mask structure can be fully resolved by the utilization of amplitude masks. The utilized phase-shift masks offer higher 1st order diffraction efficiency and allow a demagnification of the mask structure in the achromatic Talbot plane.

  5. Haystack, a web-based tool for metabolomics research.

    Science.gov (United States)

    Grace, Stephen C; Embry, Stephen; Luo, Heng

    2014-01-01

    Liquid chromatography coupled to mass spectrometry (LCMS) has become a widely used technique in metabolomics research for differential profiling, the broad screening of biomolecular constituents across multiple samples to diagnose phenotypic differences and elucidate relevant features. However, a significant limitation in LCMS-based metabolomics is the high-throughput data processing required for robust statistical analysis and data modeling for large numbers of samples with hundreds of unique chemical species. To address this problem, we developed Haystack, a web-based tool designed to visualize, parse, filter, and extract significant features from LCMS datasets rapidly and efficiently. Haystack runs in a browser environment with an intuitive graphical user interface that provides both display and data processing options. Total ion chromatograms (TICs) and base peak chromatograms (BPCs) are automatically displayed, along with time-resolved mass spectra and extracted ion chromatograms (EICs) over any mass range. Output files in the common .csv format can be saved for further statistical analysis or customized graphing. Haystack's core function is a flexible binning procedure that converts the mass dimension of the chromatogram into a set of interval variables that can uniquely identify a sample. Binned mass data can be analyzed by exploratory methods such as principal component analysis (PCA) to model class assignment and identify discriminatory features. The validity of this approach is demonstrated by comparison of a dataset from plants grown at two light conditions with manual and automated peak detection methods. Haystack successfully predicted class assignment based on PCA and cluster analysis, and identified discriminatory features based on analysis of EICs of significant bins. Haystack, a new online tool for rapid processing and analysis of LCMS-based metabolomics data is described. It offers users a range of data visualization options and supports non

  6. Infusing Qualitative Traditions in Counseling Research Designs

    Science.gov (United States)

    Hays, Danica G.; Wood, Chris

    2011-01-01

    Research traditions serve as a blueprint or guide for a variety of design decisions throughout qualitative inquiry. This article presents 6 qualitative research traditions: grounded theory, phenomenology, consensual qualitative research, ethnography, narratology, and participatory action research. For each tradition, the authors describe its…

  7. Impacting Society through Engineering Design Research

    DEFF Research Database (Denmark)

    Howard, Thomas J.

    2011-01-01

    Following the recent ICED11 conference in Copenhagen, Thomas Howard, ICED11 Assistant Chair and Ass. Professor at DTU has written a reflection on design research and design practice, suggesting that in addition to benefiting society through the improved understanding of methods of and approaches...... to design, the academic design community should through design practice produce empowering products which address societal needs unbound by the necessity for profit....

  8. Software simulation: a tool for enhancing control system design

    International Nuclear Information System (INIS)

    Sze, B.; Ridgway, G.H.

    2008-01-01

    The creation, implementation and management of engineering design tools are important to the quality and efficiency of any large engineering project. Some of the most complicated tools to develop are system simulators. The development and implementation of system simulators to support replacement fuel handling control systems is of particular interest to the Canadian nuclear industry given the current age of installations and the risk of obsolescence to many utilities. The use of such simulator tools has been known to significantly improve successful deployment of new software packages and maintenance-related software changes while reducing the time required for their overall development. Moreover, these simulation systems can also serve as operator training stations and provide a virtual environment for site engineers to test operational changes before they are uploaded to the actual system. (author)

  9. IT Tools for Teachers and Scientists, Created by Undergraduate Researchers

    Science.gov (United States)

    Millar, A. Z.; Perry, S.

    2007-12-01

    Interns in the Southern California Earthquake Center/Undergraduate Studies in Earthquake Information Technology (SCEC/UseIT) program conduct computer science research for the benefit of earthquake scientists and have created products in growing use within the SCEC education and research communities. SCEC/UseIT comprises some twenty undergraduates who combine their varied talents and academic backgrounds to achieve a Grand Challenge that is formulated around needs of SCEC scientists and educators and that reflects the value SCEC places on the integration of computer science and the geosciences. In meeting the challenge, students learn to work on multidisciplinary teams and to tackle complex problems with no guaranteed solutions. Meantime, their efforts bring fresh perspectives and insight to the professionals with whom they collaborate, and consistently produces innovative, useful tools for research and education. The 2007 Grand Challenge was to design and prototype serious games to communicate important earthquake science concepts. Interns broke themselves into four game teams, the Educational Game, the Training Game, the Mitigation Game and the Decision-Making Game, and created four diverse games with topics from elementary plate tectonics to earthquake risk mitigation, with intended players ranging from elementary students to city planners. The games were designed to be versatile, to accommodate variation in the knowledge base of the player; and extensible, to accommodate future additions. The games are played on a web browser or from within SCEC-VDO (Virtual Display of Objects). SCEC-VDO, also engineered by UseIT interns, is a 4D, interactive, visualization software that enables integration and exploration of datasets and models such as faults, earthquake hypocenters and ruptures, digital elevation models, satellite imagery, global isochrons, and earthquake prediction schemes. SCEC-VDO enables the user to create animated movies during a session, and is now part

  10. Modular reconfigurable machine tools: design, control and evaluation

    CSIR Research Space (South Africa)

    Padayachee, J

    2009-11-01

    Full Text Available The reconfigurable manufacturing system (RMS) paradigm encapsulates methodologies that enable manufacturing systems to cope effectively with market and product changes. This research presents the design and evaluation of modular reconfigurable...

  11. Process development and tooling design for intrinsic hybrid composites

    Science.gov (United States)

    Riemer, M.; Müller, R.; Drossel, W. G.; Landgrebe, D.

    2017-09-01

    Hybrid parts, which combine the advantages of different material classes, are moving into the focus of lightweight applications. This development is amplified by their high potential for usage in the field of crash relevant structures. By the current state of the art, hybrid parts are mainly made in separate, subsequent forming and joining processes. By using the concept of an intrinsic hybrid, the shaping of the part and the joining of the different materials are performed in a single process step for shortening the overall processing time and thereby the manufacturing costs. The investigated hybrid part is made from continuous fibre reinforced plastic (FRP), in which a metallic reinforcement structure is integrated. The connection between these layered components is realized by a combination of adhesive bonding and a geometrical form fit. The form fit elements are intrinsically generated during the forming process. This contribution regards the development of the forming process and the design of the forming tool for the single step production of a hybrid part. To this end a forming tool, which combines the thermo-forming and the metal forming process, is developed. The main challenge by designing the tool is the temperature management of the tool elements for the variothermal forming process. The process parameters are determined in basic tests and finite element (FE) simulation studies. On the basis of these investigations a control concept for the steering of the motion axes and the tool temperature is developed. Forming tests are carried out with the developed tool and the manufactured parts are analysed by computer assisted tomography (CT) scans.

  12. Process models as tools in forestry research and management

    Science.gov (United States)

    Kurt Johnsen; Lisa Samuelson; Robert Teskey; Steve McNulty; Tom Fox

    2001-01-01

    Forest process models are mathematical representations of biological systems that incorporate our understanding of physiological and ecological mechanisms into predictive algorithms. These models were originally designed and used for research purposes, but are being developed for use in practical forest management. Process models designed for research...

  13. Designing tools for oil exploration using nuclear modeling

    Directory of Open Access Journals (Sweden)

    Mauborgne Marie-Laure

    2017-01-01

    Full Text Available When designing nuclear tools for oil exploration, one of the first steps is typically nuclear modeling for concept evaluation and initial characterization. Having an accurate model, including the availability of accurate cross sections, is essential to reduce or avoid time consuming and costly design iterations. During tool response characterization, modeling is benchmarked with experimental data and then used to complement and to expand the database to make it more detailed and inclusive of more measurement environments which are difficult or impossible to reproduce in the laboratory. We present comparisons of our modeling results obtained using the ENDF/B-VI and ENDF/B-VII cross section data bases, focusing on the response to a few elements found in the tool, borehole and subsurface formation. For neutron-induced inelastic and capture gamma ray spectroscopy, major obstacles may be caused by missing or inaccurate cross sections for essential materials. We show examples of the benchmarking of modeling results against experimental data obtained during tool characterization and discuss observed discrepancies.

  14. Designing tools for oil exploration using nuclear modeling

    Science.gov (United States)

    Mauborgne, Marie-Laure; Allioli, Françoise; Manclossi, Mauro; Nicoletti, Luisa; Stoller, Chris; Evans, Mike

    2017-09-01

    When designing nuclear tools for oil exploration, one of the first steps is typically nuclear modeling for concept evaluation and initial characterization. Having an accurate model, including the availability of accurate cross sections, is essential to reduce or avoid time consuming and costly design iterations. During tool response characterization, modeling is benchmarked with experimental data and then used to complement and to expand the database to make it more detailed and inclusive of more measurement environments which are difficult or impossible to reproduce in the laboratory. We present comparisons of our modeling results obtained using the ENDF/B-VI and ENDF/B-VII cross section data bases, focusing on the response to a few elements found in the tool, borehole and subsurface formation. For neutron-induced inelastic and capture gamma ray spectroscopy, major obstacles may be caused by missing or inaccurate cross sections for essential materials. We show examples of the benchmarking of modeling results against experimental data obtained during tool characterization and discuss observed discrepancies.

  15. Conducting Classroom Design Research with Teachers

    Science.gov (United States)

    Stephan, Michelle. L.

    2015-01-01

    Design research is usually motivated by university members with experience and interest in building theory and instructional designs in collaboration with one teacher. Typically, the teacher is considered as a member of the research team, with the primary responsibility of implementing instruction. However, in this chapter, I describe a Classroom…

  16. Reinventing Learning: A Design-Research Odyssey

    Science.gov (United States)

    Abrahamson, Dor

    2015-01-01

    Design research is a broad, practice-based approach to investigating problems of education. This approach can catalyze the development of learning theory by fostering opportunities for transformational change in scholars' interpretation of instructional interactions. Surveying a succession of design-research projects, I explain how challenges in…

  17. Evaluation in Design-Oriented Research

    NARCIS (Netherlands)

    Verschuren, P.J.M.; Hartog, R.J.M.

    2005-01-01

    Design has been recognized for a long time both as art and as science. In the sixties of the previous century design-oriented research began to draw the attention of scientific researchers and methodologists, not only in technical engineering but also in the social sciences. However, a rather

  18. Research and Design in Landscape Architecture

    NARCIS (Netherlands)

    Nijhuis, S.; Bobbink, I.; Jauslin, D.T.

    2011-01-01

    This paper aims to introduce the particular methodology of the author's and their colleagues at TU Delft Chair of Landscape Architecture. This approach is characterised by theories, methods and techniques converging towards design and research and research by design. The relation and interaction

  19. Mixed Methods Research Designs in Counseling Psychology

    Science.gov (United States)

    Hanson, William E.; Creswell, John W.; Clark, Vicki L. Plano; Petska, Kelly S.; Creswell, David J.

    2005-01-01

    With the increased popularity of qualitative research, researchers in counseling psychology are expanding their methodologies to include mixed methods designs. These designs involve the collection, analysis, and integration of quantitative and qualitative data in a single or multiphase study. This article presents an overview of mixed methods…

  20. The Design of Tools for Sketching Sensor-Based Interaction

    DEFF Research Database (Denmark)

    Brynskov, Martin; Lunding, Rasmus; Vestergaard, Lasse Steenbock

    2012-01-01

    In this paper we motivate, present, and give an initial evaluation of DUL Radio, a small wireless toolkit for sketching sensor-based interaction. In the motivation, we discuss the purpose of this specific platform, which aims to balance ease-of-use (learning, setup, initialization), size, speed......, flexibility and cost, aimed at wearable and ultra-mobile prototyping where fast reaction is needed (e.g. in controlling sound), and we discuss the general issues facing this category of embodied interaction design tools. We then present the platform in more detail, both regarding hard- ware and software....... In the brief evaluation, we present our initial experiences with the platform both in design projects and in teaching. We conclude that DUL Radio does seem to be a relatively easy-to-use tool for sketching sensor-based interaction compared to other solutions, but that there are many ways to improve it. Target...

  1. A Method for Design of Modular Reconfigurable Machine Tools

    Directory of Open Access Journals (Sweden)

    Zhengyi Xu

    2017-02-01

    Full Text Available Presented in this paper is a method for the design of modular reconfigurable machine tools (MRMTs. An MRMT is capable of using a minimal number of modules through reconfiguration to perform the required machining tasks for a family of parts. The proposed method consists of three steps: module identification, module determination, and layout synthesis. In the first step, the module components are collected from a family of general-purpose machines to establish a module library. In the second step, for a given family of parts to be machined, a set of needed modules are selected from the module library to construct a desired reconfigurable machine tool. In the third step, a final machine layout is decided though evaluation by considering a number of performance indices. Based on this method, a software package has been developed that can design an MRMT for a given part family.

  2. Gaining a Competitive Edge through Action Design Research

    Science.gov (United States)

    Alexa, L.; Alexa, M.; Avasilcăi, S.

    2016-08-01

    The current business environment is characterized by increased competition and highly innovative approach, in order to create products and services to better respond to the costumers’ needs and expectations. In this specific context, the research approaches need to be more flexible and business oriented and so, throughout the paper we have used a research method that combines design research and action research, named Action Design Research which is a research method used for generating prescriptive design knowledge through building and evaluating IT artifacts in an organizational setting [1]. Following the Action Design Research stages and principles: problem identification, building, intervention and evaluation, reflection and learning and formalization of learning, the research team has developed an online instrument used to actively involve the consumer in the product development process, in order to generate a better consumers insight regarding their needs and desires and to design and/or adjust the product accordingly. The customer engagement IT tool created and tested by using Action Design Research, E-PICUS, has been developed within the framework of the research project „E-solutions for innovation through customer pro-active involvement in value creation to increase organisational competitiveness (E-PICUS)”, PN- II-PT-PCCA-2013-4-1811, currently undergoing.

  3. What Is This Thing Called "Design" in Design Research and Instructional Design

    Science.gov (United States)

    Cronje, Johannes

    2013-01-01

    This paper will consider the phenomenon of design research. It will then consider four research positions in social science research. The paper will show how the design perspectives map onto the research paradigms and how by rotating through these paradigms, a design research cycle is formed. Finally, the paper will discuss four research questions…

  4. Multidisciplinary Design, Analysis, and Optimization Tool Development Using a Genetic Algorithm

    Science.gov (United States)

    Pak, Chan-gi; Li, Wesley

    2009-01-01

    Multidisciplinary design, analysis, and optimization using a genetic algorithm is being developed at the National Aeronautics and Space Administration Dryden Flight Research Center (Edwards, California) to automate analysis and design process by leveraging existing tools to enable true multidisciplinary optimization in the preliminary design stage of subsonic, transonic, supersonic, and hypersonic aircraft. This is a promising technology, but faces many challenges in large-scale, real-world application. This report describes current approaches, recent results, and challenges for multidisciplinary design, analysis, and optimization as demonstrated by experience with the Ikhana fire pod design.!

  5. Using Network Science to Support Design Research

    DEFF Research Database (Denmark)

    Parraguez Ruiz, Pedro; Maier, Anja

    2016-01-01

    and societal impact. This chapter contributes to the use of network science in empirical studies of design organisations. It focuses on introducing a network-based perspective on the design process and in particular on making use of network science to support design research and practice. The main contribution...... of this chapter is an overview of the methodological challenges and core decision points when embarking on network-based design research, namely defining the overall research purpose and selecting network features. We furthermore highlight the potential for using archival data, the opportunities for navigating...

  6. GIS tools for analyzing accidents and road design: A review

    Energy Technology Data Exchange (ETDEWEB)

    Satria, R.

    2016-07-01

    A significant unexpected outcome of transportation systems is road accidents with injuries and loss of lives. In recent years, the number of studies about the tools for analyzing accidents and road design has increased considerably. Among these tools, Geographical Information Systems (GIS) stand out for their ability to perform complex spatial analyses. However, sometimes the GIS, has been used only as a geographical database to store and represent data about accidents and road characteristics. It has also been used to represent the results of statistical studies of accidents but, these statistical studies have not been carried out with GIS. Owing to its integrated statistical-analysis capabilities GIS provides several advantages. First, it allows a more careful and accurate data selection, screening and reduction. Also, it allows a spatial analysis of the results in pre and post-processing. Second, GIS allows the development of spatial statistics that rely on geographically-referenced data. In this paper, several GIS tools used to model accidents have been examined. The understanding of these tools will help the analyst to make a better decision about which tool could be applied in each particular condition and context. (Author)

  7. Endothelial cell cultures as a tool in biomaterial research

    NARCIS (Netherlands)

    Kirkpatrick, CJ; Otto, M; van Kooten, T; Krump, [No Value; Kriegsmann, J; Bittinger, F

    1999-01-01

    Progress in biocompatibility and tissue engineering would today be inconceivable without the aid of in vitro techniques. Endothelial cell cultures represent a valuable tool not just in haemocompatibility testing, but also in the concept of designing hybrid organs. In the past endothelial cells (EC)

  8. Topology and boundary shape optimization as an integrated design tool

    Science.gov (United States)

    Bendsoe, Martin Philip; Rodrigues, Helder Carrico

    1990-01-01

    The optimal topology of a two dimensional linear elastic body can be computed by regarding the body as a domain of the plane with a high density of material. Such an optimal topology can then be used as the basis for a shape optimization method that computes the optimal form of the boundary curves of the body. This results in an efficient and reliable design tool, which can be implemented via common FEM mesh generator and CAD type input-output facilities.

  9. Learning Asset Technology Integration Support Tool Design Document

    Science.gov (United States)

    2010-05-11

    language known as Hypertext Preprocessor ( PHP ) and by MySQL – a relational database management system that can also be used for content management. It...Requirements The LATIST tool will be implemented utilizing a WordPress platform with MySQL as the database. Also the LATIST system must effectively work... MySQL . When designing the LATIST system there are several considerations which must be accounted for in the working prototype. These include: • DAU

  10. Design of a Power Tool Attachment for Sawing Operation

    Directory of Open Access Journals (Sweden)

    Mayur Appaiah

    2015-07-01

    Full Text Available The Design of a Power Tool Attachment for Sawing Operation is discussed. First, the Target Specifications are established. The Design work is carried out, especially that of the Main Shaft and Support Tube. Calculations and Finite Element Analysis (FEA are also done. The Prototype is fabricated and assembled. The Testing of the prototype is done, by Sawing commercial plywood of maximum thickness 25mm. Weight of the Attachment is 1.3 kg, and the Machine is easy to use, benefitting unskilled users.

  11. Development of reactor design aid tool using virtual reality technology

    International Nuclear Information System (INIS)

    Mizuguchi, N.; Tamura, Y.; Imagawa, S.; Sagara, A.; Hayashi, T.

    2006-01-01

    A new type of aid system for fusion reactor design, to which the virtual reality (VR) visualization and sonification techniques are applied, is developed. This system provides us with an intuitive interaction environment in the VR space between the observer and the designed objects constructed by the conventional 3D computer-aided design (CAD) system. We have applied the design aid tool to the heliotron-type fusion reactor design activity FFHR2m [A. Sagara, S. Imagawa, O. Mitarai, T. Dolan, T. Tanaka, Y. Kubota, et al., Improved structure and long -life blanket concepts for heliotron reactors, Nucl. Fusion 45 (2005) 258-263] on the virtual reality system CompleXcope [Y. Tamura, A. Kageyama, T. Sato, S. Fujiwara, H. Nakamura, Virtual reality system to visualize and auralize numerical imulation data, Comp. Phys. Comm. 142 (2001) 227-230] of the National Institute for Fusion Science, Japan, and have evaluated its performance. The tool includes the functions of transfer of the observer, translation and scaling of the objects, recording of the operations and the check of interference

  12. A PART OF RESEARCH METHODOLOGY COURSE: Introduction to the Research Tools

    OpenAIRE

    Ebrahim, Nader Ale

    2016-01-01

    Research Tools” can be defined as vehicles that broadly facilitate research and related activities. “Research Tools” enable researchers to collect, organize, analyze, visualize and publicized research  outputs. Dr. Nader has collected over 800 tools that enable students to follow the correct path in research and to ultimately produce high-quality research outputs with more accuracy and efficiency. It is assembled as an interactive Web-based mind map, titled “Research Tools”, which is updated...

  13. Interaction Matrices as a Tool for Prioritizing Radioecology Research

    Energy Technology Data Exchange (ETDEWEB)

    Mora, J.C.; Robles, Beatriz [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas - CIEMAT (Spain); Bradshaw, Clare; Stark, Karolina [Stockholm University (Sweden); Sweeck, Liev; Vives i Batlle, Jordi [Belgian Nuclear Research Centre SCK-CEN (Belgium); Beresford, Nick [Centre for Ecology and Hydrology - CEH (United Kingdom); Thoerring, Havard; Dowdall, Mark [Norwegian Radiation Protection Authority - NRPA (Norway); Outola, Iisa; Turtiainen, Tuukka; Vetikko, Virve [STUK - Radiation and Nuclear Safety Authority (Finland); Steiner, Martin [Federal Office for Radiation Protection - BfS (Germany); Beaugelin-Seiller, Karine; Fevrier, Laureline; Hurtevent, Pierre; Boyer, Patrick [Institut de Radioprotection et de Surete Nucleaire - IRSN (France)

    2014-07-01

    Interaction Matrices as a Tool for Prioritizing Radioecology Research J.C. Mora CIEMAT In 2010 the Strategy for Allied Radioecology (STAR) was launched with several objectives aimed towards integrating the radioecology research efforts of nine institutions in Europe. One of these objectives was the creation of European Radioecology Observatories. The Chernobyl Exclusion Zone (CEZ) and the Upper Silesian Coal Basin (USCB), a coal mining area in Poland, have been chosen after a selection process. A second objective was to develop a system for improving and validating the capabilities of predicting the behaviour of the main radionuclides existing at these observatories. Interaction Matrices (IM) have been used since the 1990's as a tool for developing ecological conceptual models and have also been used within radioecology. The Interaction Matrix system relies on expert judgement for structuring knowledge of a given ecosystem at the conceptual level and was selected for use in the STAR project. A group of experts, selected from each institution of STAR, designed two matrices with the main compartments for each ecosystem (a forest in CEZ and a lake in USCB). All the features, events and processes (FEPs) which could affect the behaviour of the considered radionuclides, focusing on radiocaesium in the Chernobyl forest and radium in the Rontok-Wielki lake, were also included in each IM. Two new sets of experts were appointed to review, improve and prioritize the processes included in each IM. A first processing of the various candidate interaction matrices produced a single interaction matrix for each ecosystem which incorporated all experts combined knowledge. During the prioritization of processes in the IMs, directed towards developing a whole predictive model of radionuclides behaviour in those ecosystems, raised interesting issues related to the processes and parameters involved, regarding the existing knowledge in them. This exercise revealed several processes

  14. A Survey of Educational Games as Interaction Design Tools for Affective Learning: Thematic Analysis Taxonomy

    Science.gov (United States)

    Yusoff, Zarwina; Kamsin, Amirrudin; Shamshirband, Shahaboddin; Chronopoulos, Anthony T.

    2018-01-01

    A Computer game is the new platform in generating learning experiences for educational purposes. There are many educational games that have been used as an interaction design tool in a learning environment to enhance students learning outcomes. However, research also claims that playing video games can have a negative impact on student behavior,…

  15. Learning Axes and Bridging Tools in a Technology-Based Design for Statistics

    Science.gov (United States)

    Abrahamson, Dor; Wilensky, Uri

    2007-01-01

    We introduce a design-based research framework, "learning axes and bridging tools," and demonstrate its application in the preparation and study of an implementation of a middle-school experimental computer-based unit on probability and statistics, "ProbLab" (Probability Laboratory, Abrahamson and Wilensky 2002 [Abrahamson, D., & Wilensky, U.…

  16. The Individual-Practice Framework as a design tool to understand consumer behaviour

    NARCIS (Netherlands)

    Piscicelli, L.; Moreno, Mariale; Cooper, Tim; Fisher, Tom

    2016-01-01

    Design for behaviour change is a growing research field which aims at providing methods and tools to foster pro-environmental and pro-social action through the application of diverse theories, models and approaches from the social sciences. This chapter presents the Individual-Practice Framework,

  17. Design and Implementation of Collaborative Research Approaches

    Science.gov (United States)

    Venti, Mike W.; Berger, David E.

    2009-01-01

    This poster reviews the collarborative research approaches that NASA has been designing and implementing for the Integrated Vehicle Health Management (IVHM) Project. The inputs for the technical plan are reviewed, the Research Test and Integration Plan (RTIP) WIKI, is used to create and propose a multi-themed and multi-partner research testing opportunities. The outputs are testing opportunities.

  18. Ubiquitous Surveys Reveal Shallow Research Designs (Commentary).

    Science.gov (United States)

    McDaniel, Charles-Gene

    1990-01-01

    Criticizes the large amount of often irrelevant, poorly designed, and poorly written quantitative journalism research. Notes that journalism education and mass communication education research published in scholarly journals is largely ignored by professional journalists, who find more value in the qualitative research reported in the journalism…

  19. Rotorcraft Optimization Tools: Incorporating Rotorcraft Design Codes into Multi-Disciplinary Design, Analysis, and Optimization

    Science.gov (United States)

    Meyn, Larry A.

    2018-01-01

    One of the goals of NASA's Revolutionary Vertical Lift Technology Project (RVLT) is to provide validated tools for multidisciplinary design, analysis and optimization (MDAO) of vertical lift vehicles. As part of this effort, the software package, RotorCraft Optimization Tools (RCOTOOLS), is being developed to facilitate incorporating key rotorcraft conceptual design codes into optimizations using the OpenMDAO multi-disciplinary optimization framework written in Python. RCOTOOLS, also written in Python, currently supports the incorporation of the NASA Design and Analysis of RotorCraft (NDARC) vehicle sizing tool and the Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics II (CAMRAD II) analysis tool into OpenMDAO-driven optimizations. Both of these tools use detailed, file-based inputs and outputs, so RCOTOOLS provides software wrappers to update input files with new design variable values, execute these codes and then extract specific response variable values from the file outputs. These wrappers are designed to be flexible and easy to use. RCOTOOLS also provides several utilities to aid in optimization model development, including Graphical User Interface (GUI) tools for browsing input and output files in order to identify text strings that are used to identify specific variables as optimization input and response variables. This paper provides an overview of RCOTOOLS and its use

  20. Tools and procedures for a “maintenance oriented” design for buildings of worship

    Directory of Open Access Journals (Sweden)

    Cinzia Talamo

    2013-10-01

    Full Text Available The paper describes the results, achieved in the first year, of a three years research dealing with the themes connected with the methods and the tools for planned maintenance and concerning the proposal of a system of supports for a design “maintenance oriented”. The starting hypothesis is that most of maintenance problems emerging during the life time of a building are due to a lack of attention towards the use phase that both clients and designers demonstrate. Starting from this point of view the aim of the research was to develop and to check a system of supports, useful both for clients and for designs of buildings of worship, consisting in guide lines, procedures and evaluation tools, graduate according to the different steps of design process and carried out in order to assume and to verify the requirement of maintainability.

  1. Software Tools | Office of Cancer Clinical Proteomics Research

    Science.gov (United States)

    The CPTAC program develops new approaches to elucidate aspects of the molecular complexity of cancer made from large-scale proteogenomic datasets, and advance them toward precision medicine.  Part of the CPTAC mission is to make data and tools available and accessible to the greater research community to accelerate the discovery process.

  2. Design of Contactlessly Powered and Piezoelectrically Actuated Tools for Non-Resonant Vibration Assisted Milling

    Directory of Open Access Journals (Sweden)

    Martin Silge

    2018-04-01

    Full Text Available This contribution presents a novel design approach for vibration assisted machining (VAM. A lot of research has already been done regarding the influence of superimposed vibrations during a milling process, but there is almost no information about how to design a VAM tool where the tool is actually rotating. The proposed system consists of a piezoelectric actuator for vibration excitation, an inductive contactless energy transfer system and an electronic circuit for powering the actuated tool. The main benefit of transferring the required power without mechanical contact is that the maximum spindle speed is no longer restricted by friction of slip rings. A detailed model is shown that enables for preliminary estimation of the system’s response to different excitation signals. Experimental data are provided to validate the model. Finally, some parts are shown that have been manufactured using the contactlessly actuated milling tool.

  3. Research Design – Composition, Configuration and Interdependencies

    DEFF Research Database (Denmark)

    Kastberg, Peter

    2016-01-01

    In this essay I will present an integrative view on research design. I will introduce what I take to be the skeleton components of any research design within the social sciences, i.e. the elements of research question, philosophy of science, methodology, method and data. With this as my point...... of departure I will go on to focus on a presentation, a discussion and an evaluation of a new appreciation of the interdependencies of the elements in the research design. An appreciation that favors a relational rather than an atomistic outlook and which gives rise to an ecological conceptualization......). At a more concrete level, it aims at presenting an idea of research design which would – hopefully – be an inspiration to (young) scholars....

  4. Experimental design research approaches, perspectives, applications

    CERN Document Server

    Stanković, Tino; Štorga, Mario

    2016-01-01

    This book presents a new, multidisciplinary perspective on and paradigm for integrative experimental design research. It addresses various perspectives on methods, analysis and overall research approach, and how they can be synthesized to advance understanding of design. It explores the foundations of experimental approaches and their utility in this domain, and brings together analytical approaches to promote an integrated understanding. The book also investigates where these approaches lead to and how they link design research more fully with other disciplines (e.g. psychology, cognition, sociology, computer science, management). Above all, the book emphasizes the integrative nature of design research in terms of the methods, theories, and units of study—from the individual to the organizational level. Although this approach offers many advantages, it has inherently led to a situation in current research practice where methods are diverging and integration between individual, team and organizational under...

  5. Collaboratively Conceived, Designed and Implemented: Matching Visualization Tools with Geoscience Data Collections and Geoscience Data Collections with Visualization Tools via the ToolMatch Service.

    Science.gov (United States)

    Hoebelheinrich, N. J.; Lynnes, C.; West, P.; Ferritto, M.

    2014-12-01

    Two problems common to many geoscience domains are the difficulties in finding tools to work with a given dataset collection, and conversely, the difficulties in finding data for a known tool. A collaborative team from the Earth Science Information Partnership (ESIP) has gotten together to design and create a web service, called ToolMatch, to address these problems. The team began their efforts by defining an initial, relatively simple conceptual model that addressed the two uses cases briefly described above. The conceptual model is expressed as an ontology using OWL (Web Ontology Language) and DCterms (Dublin Core Terms), and utilizing standard ontologies such as DOAP (Description of a Project), FOAF (Friend of a Friend), SKOS (Simple Knowledge Organization System) and DCAT (Data Catalog Vocabulary). The ToolMatch service will be taking advantage of various Semantic Web and Web standards, such as OpenSearch, RESTful web services, SWRL (Semantic Web Rule Language) and SPARQL (Simple Protocol and RDF Query Language). The first version of the ToolMatch service was deployed in early fall 2014. While more complete testing is required, a number of communities besides ESIP member organizations have expressed interest in collaborating to create, test and use the service and incorporate it into their own web pages, tools and / or services including the USGS Data Catalog service, DataONE, the Deep Carbon Observatory, Virtual Solar Terrestrial Observatory (VSTO), and the U.S. Global Change Research Program. In this session, presenters will discuss the inception and development of the ToolMatch service, the collaborative process used to design, refine, and test the service, and future plans for the service.

  6. Mechanical System Analysis/Design Tool (MSAT) Quick Guide

    Science.gov (United States)

    Lee, HauHua; Kolb, Mark; Madelone, Jack

    1998-01-01

    MSAT is a unique multi-component multi-disciplinary tool that organizes design analysis tasks around object-oriented representations of configuration components, analysis programs and modules, and data transfer links between them. This creative modular architecture enables rapid generation of input stream for trade-off studies of various engine configurations. The data transfer links automatically transport output from one application as relevant input to the next application once the sequence is set up by the user. The computations are managed via constraint propagation - the constraints supplied by the user as part of any optimization module. The software can be used in the preliminary design stage as well as during the detail design of product development process.

  7. Are EM's communication tools effective? Evaluation research of two EM publications

    International Nuclear Information System (INIS)

    Wight, Evelyn; Gardner, Gene; Harvey, Tony

    1992-01-01

    As a reflection of its growing culture of openness, and in response to the public's need for accurate information about its activities, the U.S. Department of Energy (DOE) Office of the Assistant Secretary for Environmental Restoration and Waste Management (EM) has increased the amount of information available to the public through communication tools such as brochures, fact sheets, and a travelling exhibit with an interactive computer display. Our involvement with this effort has been to design, develop, and critique booklets, brochures, fact sheets and other communication tools for EM. This paper presents an evaluation of the effectiveness of two communication tools we developed: the EM Booklet and the EM Fact Sheets. We measured effectiveness using non-parametric testing. This paper describes DOE's culture change, EM's communication tools and their context within DOE'S new open culture, our research, test methods and results, the significance of our research, and our plans for future research. (author)

  8. Design research through practice : from the lab, field, and showroom

    NARCIS (Netherlands)

    Koskinen, I.; Zimmerman, J.; Binder, T.; Redström, J.; Wensveen, S.A.G.

    2011-01-01

    Businesses and the HCI and Interaction Design communities have embraced design and design research. Design research as a field blends methodologies from several disciplines - sociology, engineering, software, philosophy, industrial design, HCI/interaction design -- so designers can learn from past

  9. Action Research on a WebQuest as an Instructional Tool for Writing Abstracts of Research Articles

    Directory of Open Access Journals (Sweden)

    Krismiyati Latuperissa

    2012-08-01

    Full Text Available The massive growth of and access to information technology (IT has enabled the integration of technology into classrooms. One such integration is the use of WebQuests as an instructional tool in teaching targeted learning activities such as writing abstracts of research articles in English for English as a Foreign Language (EFL learners. In the academic world, writing an abstract of a research paper or final project in English can be challenging for EFL students. This article presents an action research project on the process and outcomes of using a WebQuest designed to help 20 Indonesian university IT students write a research article’s abstract in English. Findings reveal that despite positive feedback, changes need to be made to make the WebQuest a more effective instructional tool for the purpose it was designed.

  10. Research-based design & design-based research: Affordances, limitations and synergies

    NARCIS (Netherlands)

    McKenney, Susan

    2015-01-01

    Research-based design is an orientation to educational development that is explicitly informed by existing research as well as formative evaluation. Design-based research is a genre of inquiry in which the design of innovative solutions to problems in educational practice provides the context for

  11. Collaborative Mission Design at NASA Langley Research Center

    Science.gov (United States)

    Gough, Kerry M.; Allen, B. Danette; Amundsen, Ruth M.

    2005-01-01

    NASA Langley Research Center (LaRC) has developed and tested two facilities dedicated to increasing efficiency in key mission design processes, including payload design, mission planning, and implementation plan development, among others. The Integrated Design Center (IDC) is a state-of-the-art concurrent design facility which allows scientists and spaceflight engineers to produce project designs and mission plans in a real-time collaborative environment, using industry-standard physics-based development tools and the latest communication technology. The Mission Simulation Lab (MiSL), a virtual reality (VR) facility focused on payload and project design, permits engineers to quickly translate their design and modeling output into enhanced three-dimensional models and then examine them in a realistic full-scale virtual environment. The authors were responsible for envisioning both facilities and turning those visions into fully operational mission design resources at LaRC with multiple advanced capabilities and applications. In addition, the authors have created a synergistic interface between these two facilities. This combined functionality is the Interactive Design and Simulation Center (IDSC), a meta-facility which offers project teams a powerful array of highly advanced tools, permitting them to rapidly produce project designs while maintaining the integrity of the input from every discipline expert on the project. The concept-to-flight mission support provided by IDSC has shown improved inter- and intra-team communication and a reduction in the resources required for proposal development, requirements definition, and design effort.

  12. Bridging the Design-Science Gap with Tools: Science Learning and Design Behaviors in a Simulated Environment for Engineering Design

    Science.gov (United States)

    Chao, Jie; Xie, Charles; Nourian, Saeid; Chen, Guanhua; Bailey, Siobhan; Goldstein, Molly H.; Purzer, Senay; Adams, Robin S.; Tutwiler, M. Shane

    2017-01-01

    Many pedagogical innovations aim to integrate engineering design and science learning. However, students frequently show little attempt or have difficulties in connecting their design projects with the underlying science. Drawing upon the Cultural-Historical Activity Theory, we argue that the design tools available in a learning environment…

  13. Design and construction of multi research reactor

    International Nuclear Information System (INIS)

    1985-05-01

    This is the report about design and construction of multi research reactor, which introduces the purpose and necessity of the project, business contents, plan of progress of project and budget for the project. There are three appendixes about status of research reactor in other country, a characteristic of research reactor, three charts about evaluation, process and budget for the multi research reactor and three drawings for the project.

  14. Quasi experimental designs in pharmacist intervention research.

    Science.gov (United States)

    Krass, Ines

    2016-06-01

    Background In the field of pharmacist intervention research it is often difficult to conform to the rigorous requirements of the "true experimental" models, especially the requirement of randomization. When randomization is not feasible, a practice based researcher can choose from a range of "quasi-experimental designs" i.e., non-randomised and at time non controlled. Objective The aim of this article was to provide an overview of quasi-experimental designs, discuss their strengths and weaknesses and to investigate their application in pharmacist intervention research over the previous decade. Results In the literature quasi experimental studies may be classified into five broad categories: quasi-experimental design without control groups; quasi-experimental design that use control groups with no pre-test; quasi-experimental design that use control groups and pre-tests; interrupted time series and stepped wedge designs. Quasi-experimental study design has consistently featured in the evolution of pharmacist intervention research. The most commonly applied of all quasi experimental designs in the practice based research literature are the one group pre-post-test design and the non-equivalent control group design i.e., (untreated control group with dependent pre-tests and post-tests) and have been used to test the impact of pharmacist interventions in general medications management as well as in specific disease states. Conclusion Quasi experimental studies have a role to play as proof of concept, in the pilot phases of interventions when testing different intervention components, especially in complex interventions. They serve to develop an understanding of possible intervention effects: while in isolation they yield weak evidence of clinical efficacy, taken collectively, they help build a body of evidence in support of the value of pharmacist interventions across different practice settings and countries. However, when a traditional RCT is not feasible for

  15. Colossal Tooling Design: 3D Simulation for Ergonomic Analysis

    Science.gov (United States)

    Hunter, Steve L.; Dischinger, Charles; Thomas, Robert E.; Babai, Majid

    2003-01-01

    The application of high-level 3D simulation software to the design phase of colossal mandrel tooling for composite aerospace fuel tanks was accomplished to discover and resolve safety and human engineering problems. The analyses were conducted to determine safety, ergonomic and human engineering aspects of the disassembly process of the fuel tank composite shell mandrel. Three-dimensional graphics high-level software, incorporating various ergonomic analysis algorithms, was utilized to determine if the process was within safety and health boundaries for the workers carrying out these tasks. In addition, the graphical software was extremely helpful in the identification of material handling equipment and devices for the mandrel tooling assembly/disassembly process.

  16. Digital platforms for research collaboration: using design science in developing a South African open knowledge repository

    CSIR Research Space (South Africa)

    van Biljon, J

    2017-05-01

    Full Text Available ) enabled collaboration through the design and development of a sustainable open knowledge repository (OKR) according to the design science research (DSR) paradigm. OKRs are tools used to support knowledge sharing and collaboration. The theoretical...

  17. Schematic representation of case study research designs.

    Science.gov (United States)

    Rosenberg, John P; Yates, Patsy M

    2007-11-01

    The paper is a report of a study to demonstrate how the use of schematics can provide procedural clarity and promote rigour in the conduct of case study research. Case study research is a methodologically flexible approach to research design that focuses on a particular case - whether an individual, a collective or a phenomenon of interest. It is known as the 'study of the particular' for its thorough investigation of particular, real-life situations and is gaining increased attention in nursing and social research. However, the methodological flexibility it offers can leave the novice researcher uncertain of suitable procedural steps required to ensure methodological rigour. This article provides a real example of a case study research design that utilizes schematic representation drawn from a doctoral study of the integration of health promotion principles and practices into a palliative care organization. The issues discussed are: (1) the definition and application of case study research design; (2) the application of schematics in research; (3) the procedural steps and their contribution to the maintenance of rigour; and (4) the benefits and risks of schematics in case study research. The inclusion of visual representations of design with accompanying explanatory text is recommended in reporting case study research methods.

  18. Materials modelling - a possible design tool for advanced nuclear applications

    International Nuclear Information System (INIS)

    Hoffelner, W.; Samaras, M.; Bako, B.; Iglesias, R.

    2008-01-01

    The design of components for power plants is usually based on codes, standards and design rules or code cases. However, it is very difficult to get the necessary experimental data to prove these lifetime assessment procedures for long-term applications in environments where complex damage interactions (temperature, stress, environment, irradiation) can occur. The rules used are often very simple and do not have a basis which take physical damage into consideration. The linear life fraction rule for creep and fatigue interaction can be taken as a prominent example. Materials modelling based on a multi-scale approach in principle provides a tool to convert microstructural findings into mechanical response and therefore has the capability of providing a set of tools for the improvement of design life assessments. The strength of current multi-scale modelling efforts is the insight they offer as regards experimental phenomena. To obtain an understanding of these phenomena it is import to focus on issues which are important at the various time and length scales of the modelling code. In this presentation the multi-scale path will be demonstrated with a few recent examples which focus on VHTR applications. (authors)

  19. Integrating information technologies as tools for surgical research.

    Science.gov (United States)

    Schell, Scott R

    2005-10-01

    Surgical research is dependent upon information technologies. Selection of the computer, operating system, and software tool that best support the surgical investigator's needs requires careful planning before research commences. This manuscript presents a brief tutorial on how surgical investigators can best select these information technologies, with comparisons and recommendations between existing systems, software, and solutions. Privacy concerns, based upon HIPAA and other regulations, now require careful proactive attention to avoid legal penalties, civil litigation, and financial loss. Security issues are included as part of the discussions related to selection and application of information technology. This material was derived from a segment of the Association for Academic Surgery's Fundamentals of Surgical Research course.

  20. Phenomenological Research Method, Design and Procedure: A ...

    African Journals Online (AJOL)

    Phenomenological Research Method, Design and Procedure: A Phenomenological Investigation of the Phenomenon of Being-in-Community as Experienced by Two Individuals Who Have Participated in a Community Building Workshop.

  1. Scaling Research Results: Design and Evaluation | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Design and evaluation The project will provide helpful guidance to IDRC management and ... scaling and programming for scalable research Offer the monograph in multiple forms, ... Asian outlook: New growth dependent on new productivity.

  2. Evaluating an artifact in design science research

    CSIR Research Space (South Africa)

    Herselman, M

    2015-09-01

    Full Text Available In this paper, we describe the iterative evaluation of an artifact developed through the application of Design Science Research (DSR) methodology in a resource constrained environment. In the DSR process the aspect of evaluation is often done...

  3. Methodologies and tools for proton beam design for lung tumors

    International Nuclear Information System (INIS)

    Moyers, Michael F.; Miller, Daniel W.; Bush, David A.; Slater, Jerry D.

    2001-01-01

    Purpose: Proton beams can potentially increase the dose delivered to lung tumors without increasing the dose to critical normal tissues because protons can be stopped before encountering the normal tissues. This potential can only be realized if tissue motion and planning uncertainties are correctly included during planning. This study evaluated several planning strategies to determine which method best provides adequate tumor coverage, minimal normal tissue irradiation, and simplicity of use. Methods and Materials: Proton beam treatment plans were generated using one or more of three different planning strategies. These strategies included designing apertures and boluses to the PTV, apertures to the PTV and boluses to the CTV, and aperture and bolus to the CTV. Results: The planning target volume as specified in ICRU Report 50 can be used only to design the lateral margins of beams, because the distal and proximal margins resulting from CT number uncertainty, beam range uncertainty, tissue motions, and setup uncertainties, are different than the lateral margins resulting from these same factors. The best strategy for target coverage with the planning tools available overirradiated some normal tissues unnecessarily. The available tools also made the planning of lung tumors difficult. Conclusions: This study demonstrated that inclusion of target motion and setup uncertainties into a plan should be performed in the beam design step instead of creating new targets. New computerized treatment planning system tools suggested by this study will ease planning, facilitate abandonment of the PTV concept, improve conformance of the dose distribution to the target, and improve conformal avoidance of critical normal tissues

  4. The Design:Lab as platform in participatory design research

    DEFF Research Database (Denmark)

    Binder, Thomas; Brandt, Eva

    2008-01-01

    The notion of laboratory or simply 'lab' has become popular in recent years in areas outside science and technology development. Learning Labs, Innovation Labs, Usability Labs, Media and Communication Labs and even Art Labs designate institutions or fora dedicated to change and experimentation...... as others have frequently used other metaphors like workshop, studio or atelier in design research. In this article we will argue that the laboratory metaphor is particularly suitable and useful for the design:lab, and we will give examples of how we have worked with the design:lab as a platform...

  5. Research Designs and Special Education Research: Different Designs Address Different Questions

    Science.gov (United States)

    Cook, Bryan G.; Cook, Lysandra

    2016-01-01

    The aim of this article is to provide practitioners and other nonresearchers a basic understanding of research designs to aid in appropriately interpreting and applying research findings in special education. Research design provides the blueprint for conducting a research study and shapes what kind of knowledge is generated by the study. We…

  6. Analytical Design Package (ADP2): A computer aided engineering tool for aircraft transparency design

    Science.gov (United States)

    Wuerer, J. E.; Gran, M.; Held, T. W.

    1994-01-01

    The Analytical Design Package (ADP2) is being developed as a part of the Air Force Frameless Transparency Program (FTP). ADP2 is an integrated design tool consisting of existing analysis codes and Computer Aided Engineering (CAE) software. The objective of the ADP2 is to develop and confirm an integrated design methodology for frameless transparencies, related aircraft interfaces, and their corresponding tooling. The application of this methodology will generate high confidence for achieving a qualified part prior to mold fabrication. ADP2 is a customized integration of analysis codes, CAE software, and material databases. The primary CAE integration tool for the ADP2 is P3/PATRAN, a commercial-off-the-shelf (COTS) software tool. The open architecture of P3/PATRAN allows customized installations with different applications modules for specific site requirements. Integration of material databases allows the engineer to select a material, and those material properties are automatically called into the relevant analysis code. The ADP2 materials database will be composed of four independent schemas: CAE Design, Processing, Testing, and Logistics Support. The design of ADP2 places major emphasis on the seamless integration of CAE and analysis modules with a single intuitive graphical interface. This tool is being designed to serve and be used by an entire project team, i.e., analysts, designers, materials experts, and managers. The final version of the software will be delivered to the Air Force in Jan. 1994. The Analytical Design Package (ADP2) will then be ready for transfer to industry. The package will be capable of a wide range of design and manufacturing applications.

  7. Augmented reality as a design tool for mobile interfaces

    DEFF Research Database (Denmark)

    Bertelsen, Olav Wedege; Nielsen, Christina

    2000-01-01

    applications derived from the classification of augmented reality interfaces. The focus on physical interaction with objects of work and with the mobile device provides us with a range of interaction styles, based on e.g. gestures and manipulation of objects. Furthermore, issues of transparency and directness......This paper challenges user interface paradigms for mobile devices, by using the technical classification of augmented reality interfaces as a thinking tool to develop ideas for interaction with mobile devices. The paper presents future work scenarios from a wastewater treatment plant embodying PDA...... are addressed. The future scenarios indicate that the concepts of augmented reality support solving context problems in mobile design....

  8. A basic tool for computer-aided sail design

    International Nuclear Information System (INIS)

    Thrasher, D.F.; Dunyak, T.J.; Mook, D.T.; Nayfeh, A.H.

    1985-01-01

    Recent developments in modelling lifting surfaces have provided a tool that also can be used to model sails. The simplest of the adequate models is the vortex-lattice method. This method can fully account for the aerodynamic interactions among several lifting surfaces having arbitrary platforms, camber, and twist as long as separation occurs only along the edges and the phenomenon known as vortex bursting does not occur near the sails. This paper describes this method and how it can be applied to the design of sails

  9. SCREAMER: a single-line pulsed-power design tool

    International Nuclear Information System (INIS)

    Kiefer, M.L.; Widner, M.M.

    1985-01-01

    SCREAMER is a special purpose circuit code developed as a design tool for single module accelerators. It is fast, accurate, flexible, and user-friendly. Its development was motivated by the excessive costs and long turn-around times incurred when using the SCEPTRE circuit analysis code to perform simulations of circuits with large numbers of nodes and with nonlinear components. Comparable simulations between SCREAMER running on a VAX 11/780 and SCEPTRE running on a CRAY-1S show that turn-around times and costs can be two orders of magnitude lower when using SCREAMER

  10. SCREAMER - A single-line pulsed-power design tool

    International Nuclear Information System (INIS)

    Kiefer, M.L.; Widner, M.M.

    1985-01-01

    SCREAMER is a special purpose circuit code developed as a design tool for single module accelerators. it is fast, accurate, flexible, and user-friendly. Its development was motivated by the excessive costs and long turn-around times incurred when using the SCEPTRE circuit analysis code to perform simulations of circuits with large numbers of modes and with nonlinear components. Comparable simulations between SCREAMER running on a VAX 11/780 and SCEPTRE running on a CRAY-1S show that turn-around times and costs can be two orders of magnitude lower when using SCREAMER

  11. Concepts and tools for the design of semantical databases

    CERN Document Server

    Meersman, Robert A

    1991-01-01

    The design and implementation of modern more "semantical" databases involves the use of high-level conceptual abstraction mechanisms and methodologies. An illustration of this process is given using the NIAM method and notation (lecture 1), its transformation into relational database with triggers (e.g. using SYBASE0 (lecture 2) and a study of the requirements for suitable tools (RIDL*) and their extension and applicability for e.g. object-oriented databases. A case study defined by a complex database for document handling will be used as example (lecture 3).

  12. Current Research in Aircraft Tire Design and Performance

    Science.gov (United States)

    Tanner, J. A.; Mccarthy, J. L.; Clark, S. K.

    1981-01-01

    A review of the tire research programs which address the various needs identified by landing gear designers and airplane users is presented. The experimental programs are designed to increase tire tread lifetimes, relate static and dynamic tire properties, establish the tire hydroplaning spin up speed, study gear response to tire failures, and define tire temperature profiles during taxi, braking, and cornering operations. The analytical programs are aimed at providing insights into the mechanisms of heat generation in rolling tires and developing the tools necessary to streamline the tire design process and to aid in the analysis of landing gear problems.

  13. Systems Engineering-Based Tool for Identifying Critical Research Systems

    Science.gov (United States)

    Abbott, Rodman P.; Stracener, Jerrell

    2016-01-01

    This study investigates the relationship between the designated research project system independent variables of Labor, Travel, Equipment, and Contract total annual costs and the dependent variables of both the associated matching research project total annual academic publication output and thesis/dissertation number output. The Mahalanobis…

  14. Design science research as research approach in doctoral studies

    CSIR Research Space (South Africa)

    Kotzé, P

    2015-08-01

    Full Text Available Since the use of design science research (DSR) gained momentum as a research approach in information systems (IS), the adoption of a DSR approach in postgraduate studies became more acceptable. This paper reflects on a study to investigate how a...

  15. Reporting Qualitative Research: Standards, Challenges, and Implications for Health Design.

    Science.gov (United States)

    Peditto, Kathryn

    2018-04-01

    This Methods column describes the existing reporting standards for qualitative research, their application to health design research, and the challenges to implementation. Intended for both researchers and practitioners, this article provides multiple perspectives on both reporting and evaluating high-quality qualitative research. Two popular reporting standards exist for reporting qualitative research-the Consolidated Criteria for Reporting Qualitative Research (COREQ) and the Standards for Reporting Qualitative Research (SRQR). Though compiled using similar procedures, they differ in their criteria and the methods to which they apply. Creating and applying reporting criteria is inherently difficult due to the undefined and fluctuating nature of qualitative research when compared to quantitative studies. Qualitative research is expansive and occasionally controversial, spanning many different methods of inquiry and epistemological approaches. A "one-size-fits-all" standard for reporting qualitative research can be restrictive, but COREQ and SRQR both serve as valuable tools for developing responsible qualitative research proposals, effectively communicating research decisions, and evaluating submissions. Ultimately, tailoring a set of standards specific to health design research and its frequently used methods would ensure quality research and aid reviewers in their evaluations.

  16. IT-tools for Mechatronic System Engineering and Design

    DEFF Research Database (Denmark)

    Conrad, Finn; Sørensen, Torben; Andersen, T. O.

    2003-01-01

    Companies are facing the on-going challenge that customers always increase their needs for capability of products and machinery. They want improved productivity and efficiency - if possible to lower prices; value for money. The demands often focus on extensions of functionality, faster response......, operation capability, man-machine interface (MMI), robustness, reliability and safety in use. Information Technology (IT) offers both software and hardware for improvement of the engineering design and industrial applications. The latest progress in IT makes integration of an overall design...... the Esprit project SWING on IT-tools for rapid prototyping of fluid power components and systems. A mechatronic test facility for a hydraulic robot and a CNC XY-machine table was implemented. The controller applies digital signal processors (DSPs). The DSP controller utilizes the dSPACE System suitable...

  17. APRON: A Cellular Processor Array Simulation and Hardware Design Tool

    Science.gov (United States)

    Barr, David R. W.; Dudek, Piotr

    2009-12-01

    We present a software environment for the efficient simulation of cellular processor arrays (CPAs). This software (APRON) is used to explore algorithms that are designed for massively parallel fine-grained processor arrays, topographic multilayer neural networks, vision chips with SIMD processor arrays, and related architectures. The software uses a highly optimised core combined with a flexible compiler to provide the user with tools for the design of new processor array hardware architectures and the emulation of existing devices. We present performance benchmarks for the software processor array implemented on standard commodity microprocessors. APRON can be configured to use additional processing hardware if necessary and can be used as a complete graphical user interface and development environment for new or existing CPA systems, allowing more users to develop algorithms for CPA systems.

  18. Evaluating comfort with varying temperatures: a graphic design tool

    Energy Technology Data Exchange (ETDEWEB)

    Evans, J.M. [Research Centre Habitat and Energy, Faculty of Architecture, Design and Urbanism, University of Buenos Aires, Ciudad Universitaria (Argentina)

    2002-07-01

    This paper considers the need to define comfort of indoor and outdoor spaces in relation to the daily variations of temperature. A graphical tool is presented, which indicates the daily swings of temperature, shown as a single point on a graph representing the average temperature and the maximum temperature swing. This point can be compared with the comfort zones for different activity levels, such as sedentary activity, sleeping, indoor and outdoor circulation according to the design proposals for different spaces. The graph allows the representation of climatic variables, the definition of comfort zones, the selection of bio climatic design resources and the evaluation of indoor temperatures, measured in actual buildings or obtained from computer simulations. The development of the graph is explained and examples given with special emphasis on the use of thermal mass. (author)

  19. APRON: A Cellular Processor Array Simulation and Hardware Design Tool

    Directory of Open Access Journals (Sweden)

    David R. W. Barr

    2009-01-01

    Full Text Available We present a software environment for the efficient simulation of cellular processor arrays (CPAs. This software (APRON is used to explore algorithms that are designed for massively parallel fine-grained processor arrays, topographic multilayer neural networks, vision chips with SIMD processor arrays, and related architectures. The software uses a highly optimised core combined with a flexible compiler to provide the user with tools for the design of new processor array hardware architectures and the emulation of existing devices. We present performance benchmarks for the software processor array implemented on standard commodity microprocessors. APRON can be configured to use additional processing hardware if necessary and can be used as a complete graphical user interface and development environment for new or existing CPA systems, allowing more users to develop algorithms for CPA systems.

  20. An overview of research designs relevant to nursing: Part 1: quantitative research designs

    OpenAIRE

    Sousa,Valmi D.; Driessnack,Martha; Mendes,Isabel Amélia Costa

    2007-01-01

    This three part series of articles provides a brief overview of relevant research designs in nursing. The first article in the series presents the most frequently used quantitative research designs. Strategies for non-experimental and experimental research designs used to generate and refine nursing knowledge are described. In addition, the importance of quantitative designs and the role they play in developing evidence-based practice are discussed. Nursing care needs to be determined by the ...

  1. Scientific Visualization Tools for Enhancement of Undergraduate Research

    Science.gov (United States)

    Rodriguez, W. J.; Chaudhury, S. R.

    2001-05-01

    Undergraduate research projects that utilize remote sensing satellite instrument data to investigate atmospheric phenomena pose many challenges. A significant challenge is processing large amounts of multi-dimensional data. Remote sensing data initially requires mining; filtering of undesirable spectral, instrumental, or environmental features; and subsequently sorting and reformatting to files for easy and quick access. The data must then be transformed according to the needs of the investigation(s) and displayed for interpretation. These multidimensional datasets require views that can range from two-dimensional plots to multivariable-multidimensional scientific visualizations with animations. Science undergraduate students generally find these data processing tasks daunting. Generally, researchers are required to fully understand the intricacies of the dataset and write computer programs or rely on commercially available software, which may not be trivial to use. In the time that undergraduate researchers have available for their research projects, learning the data formats, programming languages, and/or visualization packages is impractical. When dealing with large multi-dimensional data sets appropriate Scientific Visualization tools are imperative in allowing students to have a meaningful and pleasant research experience, while producing valuable scientific research results. The BEST Lab at Norfolk State University has been creating tools for multivariable-multidimensional analysis of Earth Science data. EzSAGE and SAGE4D have been developed to sort, analyze and visualize SAGE II (Stratospheric Aerosol and Gas Experiment) data with ease. Three- and four-dimensional visualizations in interactive environments can be produced. EzSAGE provides atmospheric slices in three-dimensions where the researcher can change the scales in the three-dimensions, color tables and degree of smoothing interactively to focus on particular phenomena. SAGE4D provides a navigable

  2. A design and performance analysis tool for superconducting RF systems

    International Nuclear Information System (INIS)

    Schilcher, T.; Simrock, S.N.; Merminga, L.; Wang, D.X.

    1997-01-01

    Superconducting rf systems are usually operated with continuous rf power or with rf pulse lengths exceeding 1 ms to maximize the overall wall plug power efficiency. Typical examples are CEBAF at the Thomas Jefferson National Accelerator Facility (Jefferson Lab) and the TESLA Test Facility at DESY. The long pulses allow for effective application of feedback to stabilize the accelerating field in presence of microphonics, Lorentz force detuning, and fluctuations of the beam current. In this paper the authors describe a set of tools to be used with MATLAB and SIMULINK, which allow to analyze the quality of field regulation for a given design. The tools include models for the cavities, the rf power source, the beam, sources of field perturbations, and the rf feedback system. The rf control relevant electrical and mechanical characteristics of the cavity are described in form of time-varying state space models. The power source is modeled as a current generator and includes saturation characteristics and noise.An arbitrary time structure can be imposed on the beam current to reflect a macro-pulse structure and bunch charge fluctuations. For rf feedback several schemes can be selected: Traditional amplitude and phase control as well as I/Q control. The choices for the feedback controller include analog or digital approaches and various choices of frequency response. Feed forward can be added to further suppress repetitive errors. The results of a performance analysis of the CEBAF and the TESLA Linac rf system using these tools are presented

  3. The Utility of Single Subject Design Research

    Science.gov (United States)

    Bennett, Kyle D.

    2016-01-01

    Single subject design (SSD) research is a quantitative approach used to investigate basic and applied research questions. It has been used for decades to examine issues of social importance such as those related to general and special education strategies, therapeutic approaches in mental health, community health practices, safety, and business…

  4. Research, design and education, Von Humboldt revisited

    NARCIS (Netherlands)

    Bax, M.F.T.; Doevendans, C.H.; Trum, H.M.G.J.; Langenhuizen, Anja; Ouwerkerk, Marieke van; Rosemann, Jurgen

    2001-01-01

    This paper is a result of reflection on the interrelation design-research-cultivation, and on the interpretation of Von Humboldt's maxim: 'Einheit von Forschung und Lehre', which governed the academic world in the past two centuries. It is argued that 'Forschung' should be interpreted as 'Research

  5. Participatory design of probability-based decision support tools for in-hospital nurses.

    Science.gov (United States)

    Jeffery, Alvin D; Novak, Laurie L; Kennedy, Betsy; Dietrich, Mary S; Mion, Lorraine C

    2017-11-01

    To describe nurses' preferences for the design of a probability-based clinical decision support (PB-CDS) tool for in-hospital clinical deterioration. A convenience sample of bedside nurses, charge nurses, and rapid response nurses (n = 20) from adult and pediatric hospitals completed participatory design sessions with researchers in a simulation laboratory to elicit preferred design considerations for a PB-CDS tool. Following theme-based content analysis, we shared findings with user interface designers and created a low-fidelity prototype. Three major themes and several considerations for design elements of a PB-CDS tool surfaced from end users. Themes focused on "painting a picture" of the patient condition over time, promoting empowerment, and aligning probability information with what a nurse already believes about the patient. The most notable design element consideration included visualizing a temporal trend of the predicted probability of the outcome along with user-selected overlapping depictions of vital signs, laboratory values, and outcome-related treatments and interventions. Participants expressed that the prototype adequately operationalized requests from the design sessions. Participatory design served as a valuable method in taking the first step toward developing PB-CDS tools for nurses. This information about preferred design elements of tools that support, rather than interrupt, nurses' cognitive workflows can benefit future studies in this field as well as nurses' practice. Published by Oxford University Press on behalf of the American Medical Informatics Association 2017. This work is written by US Government employees and is in the public domain in the United States.

  6. Addressing Research Design Problem in Mixed Methods Research

    Science.gov (United States)

    Alavi, Hamed; Hąbek, Patrycja

    2016-03-01

    Alongside other disciplines in social sciences, management researchers use mixed methods research more and more in conduct of their scientific investigations. Mixed methods approach can also be used in the field of production engineering. In comparison with traditional quantitative and qualitative research methods, reasons behind increasing popularity of mixed research method in management science can be traced in different factors. First of all, any particular discipline in management can be theoretically related to it. Second is that concurrent approach of mixed research method to inductive and deductive research logic provides researchers with opportunity to generate theory and test hypothesis in one study simultaneously. In addition, it provides a better justification for chosen method of investigation and higher validity for obtained answers to research questions. Despite increasing popularity of mixed research methods among management scholars, there is still need for a comprehensive approach to research design typology and process in mixed research method from the perspective of management science. The authors in this paper try to explain fundamental principles of mixed research method, its typology and different steps in its design process.

  7. Research and Application of Autodesk Fusion360 in Industrial Design

    Science.gov (United States)

    Song, P. P.; Qi, Y. M.; Cai, D. C.

    2018-05-01

    In 2016, Fusion 360, a productintroduced byAutodesk and integrating industrial design, structural design, mechanical simulation, and CAM, turns out a design platform supportingcollaboration and sharing both cross-platform and via the cloud. In previous products, design and manufacturing use to be isolated. In the course of design, research and development, the communication between designers and engineers used to go on through different software products, tool commands, and even industry terms. Moreover, difficulty also lies with the communication between design thoughts and machining strategies. Naturally, a difficult product design and R & D process would trigger a noticeable gap between the design model and the actual product. A complete product development process tends to cover several major areas, such as industrial design, mechanical design, rendering and animation, computer aided emulation (CAE), and computer aided manufacturing (CAM). Fusion 360, a perfect design solving the technical problems of cross-platform data exchange, realizes the effective control of cross-regional collaboration and presents an overview of collaboration and breaks the barriers between art and manufacturing, andblocks between design and processing. The “Eco-development of Fusion360 Industrial Chain” is both a significant means to and an inevitable trend forthe manufacturers and industrial designers to carry out innovation in China.

  8. Research on an innovative design model

    Science.gov (United States)

    Fu, Y.; Fang, H.

    2018-03-01

    The design methods of furniture are different from east to west; it has been the hotspot of the scholars. However, in terms of the theory of modern design innovation, neither the early creation theory, the modern design theory, nor the widely applied TRIZ theory can fully fit the modern furniture design innovation, so it is urgent to study the modern furniture design theory. This paper is based on the idea of TRIZ theory, using lots of literatures as data, and uses the method of statistical stratification to analyze and sort out the research of modern sitting equipment, and finally put forward the modern furniture design model, which provides new ideas and perspectives for the modern design of Chinese furniture.

  9. Using Interdisciplinary and Active Research to Encourage Higher Resolution Research and Prototyping in Design

    Directory of Open Access Journals (Sweden)

    Adream Blair-Early

    2014-10-01

    Full Text Available University art and design programs are branching out and creating interdisciplinary programs and research centers that connect design students and faculty across various disciplines such as business, engineering, architecture, information studies, health sciences and education. A human-centered, problem-based approach to design research looks to position industry and academic leaders to work alongside students, community leaders, artists and non-profits to develop creative and innovative solutions to the challenges facing contemporary society. But product design benefits even more from practices that engage users throughout the entire design process, often called participatory design. Participatory design process utilizes user feedback throughout the design process to spur innovation and improve design quality. It is possible in the classroom to engage in participatory design and participatory prototyping through the use of inexpensive 3D printers and laser cutters as well as traditional hand tools, requiring only mastery of a few simple techniques and technology readily available on laptop computers. The class research being presented was conceived as part of a new interdisciplinary classroom research space call the Digital Craft Research Lab (DCRL housed within the department of Art and Design. Courses taught within the DCRL offer students, researchers and faculty continual access to both low resolution and high-resolution prototyping machinery and materials. This paper looks at the role of action and participatory research in a design course that created printed hand innovations in collaboration with a nine-year-old female user. Students were asked to work on modeling new designs as well as capturing the progress in a final open source book and models. This paper asks the question can the use of classroom collaboration, action research and work spaces encourage creativity, innovation, and critical thinking in student and professional

  10. The design process and the use of computerized tools in control room design

    International Nuclear Information System (INIS)

    Wahlstroem, B.; Heinonen, R.; Ranta, J.; Haarla, J.

    1985-09-01

    Control room design has proven an important component when the safety and availability of a complex industrial process plant are considered. Many control room deficiencies can be traced back to oversights and other errors during the design process. The introduction of powerful computers and software for computer-aided design (CAD) offers one possibility when tools for improving the quality of design are being selected. The report gives a broad assessment of problems of design and the benefits of using computer-aided design. One proposal for a structure of a computer-aided design system is considered in more detail. In this system special emphasis has been laid on dealing with requirements during design process. A demonstration system has been built and sample system user dialogues are described. The report is the final report of the LIT3.1 project of the Nordic cooperation on human reliability in the energy production field. (author)

  11. Predictive tools for designing new insulins and treatment regimens

    DEFF Research Database (Denmark)

    Klim, Søren

    The thesis deals with the development of "Predictive tools for designing new insulins and treatments regimens" and consists of two parts: A model based approach for bridging properties of new insulin analogues from glucose clamp experiments to meal tolerance tests (MTT) and a second part that des......The thesis deals with the development of "Predictive tools for designing new insulins and treatments regimens" and consists of two parts: A model based approach for bridging properties of new insulin analogues from glucose clamp experiments to meal tolerance tests (MTT) and a second part...... that describes an implemented software program able to handle stochastic differential equations (SDEs) with mixed effects. The thesis is supplemented with scientific papers published during the PhD. Developing an insulin analogue from candidate molecule to a clinical drug consists of a development programme...... and efficacy are investigated. Numerous methods are used to quantify dose and efficacy in Phase II - especially of interest is the 24-hour meal tolerance test as it tries to portray near normal living conditions. Part I describes an integrated model for insulin and glucose which is aimed at simulating 24-hour...

  12. Engineering Design Tools for Shape Memory Alloy Actuators: CASMART Collaborative Best Practices and Case Studies

    Science.gov (United States)

    Wheeler, Robert W.; Benafan, Othmane; Gao, Xiujie; Calkins, Frederick T; Ghanbari, Zahra; Hommer, Garrison; Lagoudas, Dimitris; Petersen, Andrew; Pless, Jennifer M.; Stebner, Aaron P.; hide

    2016-01-01

    The primary goal of the Consortium for the Advancement of Shape Memory Alloy Research and Technology (CASMART) is to enable the design of revolutionary applications based on shape memory alloy (SMA) technology. In order to help realize this goal and reduce the development time and required experience for the fabrication of SMA actuation systems, several modeling tools have been developed for common actuator types and are discussed herein along with case studies, which highlight the capabilities and limitations of these tools. Due to their ability to sustain high stresses and recover large deformations, SMAs have many potential applications as reliable, lightweight, solid-state actuators. Their advantage over classical actuators can also be further improved when the actuator geometry is modified to fit the specific application. In this paper, three common actuator designs are studied: wires, which are lightweight, low-profile, and easily implemented; springs, which offer actuation strokes upwards of 200 at reduced mechanical loads; and torque tubes, which can provide large actuation forces in small volumes and develop a repeatable zero-load actuation response (known as the two-way shape memory effect). The modeling frameworks, which have been implemented in the design tools, are developed for each of these frequently used SMA actuator types. In order to demonstrate the versatility and flexibility of the presented design tools, as well as validate their modeling framework, several design challenges were completed. These case studies include the design and development of an active hinge for the deployment of a solar array or foldable space structure, an adaptive solar array deployment and positioning system, a passive air temperature controller for regulation flow temperatures inside of a jet engine, and a redesign of the Corvette active hatch, which allows for pressure equalization of the car interior. For each of the presented case studies, a prototype or proof

  13. Virtual tool for simulation and wind turbine design

    International Nuclear Information System (INIS)

    Monteiro Farias, Gustavo; Barros Galhardo, Marcos André; Tavares Pinho, João

    2015-01-01

    This paper presents an educational tool to simulate wind turbines in a virtual environment. This tool can be used for research applications as well as to evaluate the operation conditions of a wind turbine by reproducing its behaviour. The first step is to apply the Blade Element Theory in order to obtain the induction factors when the tip- speed ratio and the airfoil characteristics are configured. With these values as starting point, the geometric shape of the wind blade is created and visualized. In order to evaluate the performance of the turbine, an integration method is applied, and then the power coefficient curve is plotted versus the tip-speed ratio. The power coefficient curve reaches the maximum value at the rated operation, which is essential to the transient behaviour of the wind turbine. The transient model described in this work shows the influence of all efforts acting on the rotor, which disturb the rotation. The inertial mass of the components and the air density are set up during the simulation.Using the virtual instrumentation applied to the transient model together with a 3D computer animation, the variables of the program can be controlled and visualized in graphics, and the animation of the wind turbine shows when it accelerates or decelerates the shaft rotation due to the variation of the wind speed. The tool provides the power supplied by the wind rotor to the electric generator, which can be evaluated at the end of the simulation. (full text)

  14. Script Towards Research 2.0: The Influence of Digital and Online Tools in Academic Research

    Directory of Open Access Journals (Sweden)

    Gabriela Grosseck

    2016-07-01

    Full Text Available The new Internet technologies have infiltrated in a stunning way the academic environment, both at individual and at institutional level. Therefore, more and more teachers have started educational blogs, librarians are active on Twitter, other educational actors curate web content, students post on Instagram or Flickr, and university departments have Facebook pages and/or YouTube accounts etc. Today, the use of web technology has become “a legitimate activity in many areas of higher education” (Waycott, 2010 and a considerable shift to digital academic research has gradually occurred. Teachers are encouraging students to take up digital tools for research and writing, thus revealing new ways of using information and communication technologies for academic purposes and not just for socializing. The main objective of this paper is to investigate the effects of integrating diverse digital, Web 2.0 tools and resources and OERs/MOOCs in research and in the construction of students’ academic texts. We aim to stress the increasing influence of digital and online tools in academic research and writing. Teachers, specialists, and students alike are affected by this process. In order to show how, we explore the following issues: What is Research 2.0? Which digital/online tools have we used to assist our students? What are the challenges for academic research using digital / web 2.0 tools? And how do digital tools shape academic research?

  15. Scalable Multi-core Architectures Design Methodologies and Tools

    CERN Document Server

    Jantsch, Axel

    2012-01-01

    As Moore’s law continues to unfold, two important trends have recently emerged. First, the growth of chip capacity is translated into a corresponding increase of number of cores. Second, the parallalization of the computation and 3D integration technologies lead to distributed memory architectures. This book provides a current snapshot of industrial and academic research, conducted as part of the European FP7 MOSART project, addressing urgent challenges in many-core architectures and application mapping.  It addresses the architectural design of many core chips, memory and data management, power management, design and programming methodologies. It also describes how new techniques have been applied in various industrial case studies. Describes trends towards distributed memory architectures and distributed power management; Integrates Network on Chip with distributed, shared memory architectures; Demonstrates novel design methodologies and frameworks for multi-core design space exploration; Shows how midll...

  16. MEDICAL INFORMATICS: AN ESSENTIAL TOOL FOR HEALTH SCIENCES RESEARCH IN ACUTE CARE

    OpenAIRE

    Li, Man; Pickering, Brian W.; Smith, Vernon D.; Hadzikadic, Mirsad; Gajic, Ognjen; Herasevich, Vitaly

    2009-01-01

    Medical Informatics has become an important tool in modern health care practice and research. In the present article we outline the challenges and opportunities associated with the implementation of electronic medical records (EMR) in complex environments such as intensive care units (ICU). We share our initial experience in the design, maintenance and application of a customized critical care, Microsoft SQL based, research warehouse, ICU DataMart. ICU DataMart integrates clinical and adminis...

  17. Medical Informatics: An Essential Tool for Health Sciences Research in Acute Care

    OpenAIRE

    Man Li; Brian W. Pickering; Vernon D. Smith; Mirsad Hadzikadic; Ognjen Gajic; Vitaly Herasevich

    2009-01-01

    Medical Informatics has become an important tool in modern health care practice and research. In the present article we outline the challenges and opportunities associated with the implementation of electronic medical records (EMR) in complex environments such as intensive care units (ICU). We share our initial experience in the design, maintenance and application of a customized critical care, Microsoft SQL based, research warehouse, ICU DataMart. ICU DataMart integrates clinical and adminis...

  18. Low Noise Research Fan Stage Design

    Science.gov (United States)

    Hobbs, David E.; Neubert, Robert J.; Malmborg, Eric W.; Philbrick, Daniel H.; Spear, David A.

    1995-01-01

    This report describes the design of a Low Noise ADP Research Fan stage. The fan is a variable pitch design which is designed at the cruise pitch condition. Relative to the cruise setting, the blade is closed at takeoff and opened for reverse thrust operation. The fan stage is a split flow design with fan exit guide vanes and core stators. This fan stage design was combined with a nacelle and engine core duct to form a powered fan/nacelle, subscale model. This model is intended for use in aerodynamic performance, acoustic and structural testing in a wind tunnel. The model has a 22-inch outer fan diameter and a hub-to-top ratio of 0.426 which permits the use of existing NASA fan and cowl force balance designs and rig drive system. The design parameters were selected to permit valid acoustic and aerodynamic comparisons with the PW 17-inch rig previously tested under NASA contract. The fan stage design is described in detail. The results of the design axisymmetric analysis at aerodynamic design condition are included. The structural analysis of the fan rotor and attachment is described including the material selections and stress analysis. The blade and attachment are predicted to have adequate low cycle fatigue life, and an acceptable operating range without resonant stress or flutter. The stage was acoustically designed with airfoil counts in the fan exit guide vane and core stator to minimize noise. A fan-FEGV tone analysis developed separately under NASA contract was used to determine these airfoil counts. The fan stage design was matched to a nacelle design to form a fan/nacelle model for wind tunnel testing. The nacelle design was developed under a separate NASA contract. The nacelle was designed with an axisymmetric inlet, cowl and nozzle for convenience in testing and fabrication. Aerodynamic analysis of the nacelle confirmed the required performance at various aircraft operating conditions.

  19. FOSS Tools for Research Infrastructures - A Success Story?

    Science.gov (United States)

    Stender, V.; Schroeder, M.; Wächter, J.

    2015-12-01

    Established initiatives and mandated organizations, e.g. the Initiative for Scientific Cyberinfrastructures (NSF, 2007) or the European Strategy Forum on Research Infrastructures (ESFRI, 2008), promote and foster the development of sustainable research infrastructures. The basic idea behind these infrastructures is the provision of services supporting scientists to search, visualize and access data, to collaborate and exchange information, as well as to publish data and other results. Especially the management of research data is gaining more and more importance. In geosciences these developments have to be merged with the enhanced data management approaches of Spatial Data Infrastructures (SDI). The Centre for GeoInformationTechnology (CeGIT) at the GFZ German Research Centre for Geosciences has the objective to establish concepts and standards of SDIs as an integral part of research infrastructure architectures. In different projects, solutions to manage research data for land- and water management or environmental monitoring have been developed based on a framework consisting of Free and Open Source Software (FOSS) components. The framework provides basic components supporting the import and storage of data, discovery and visualization as well as data documentation (metadata). In our contribution, we present our data management solutions developed in three projects, Central Asian Water (CAWa), Sustainable Management of River Oases (SuMaRiO) and Terrestrial Environmental Observatories (TERENO) where FOSS components build the backbone of the data management platform. The multiple use and validation of tools helped to establish a standardized architectural blueprint serving as a contribution to Research Infrastructures. We examine the question of whether FOSS tools are really a sustainable choice and whether the increased efforts of maintenance are justified. Finally it should help to answering the question if the use of FOSS for Research Infrastructures is a

  20. An evaluation of software tools for the design and development of cockpit displays

    Science.gov (United States)

    Ellis, Thomas D., Jr.

    1993-01-01

    The use of all-glass cockpits at the NASA Langley Research Center (LaRC) simulation facility has changed the means of design, development, and maintenance of instrument displays. The human-machine interface has evolved from a physical hardware device to a software-generated electronic display system. This has subsequently caused an increased workload at the facility. As computer processing power increases and the glass cockpit becomes predominant in facilities, software tools used in the design and development of cockpit displays are becoming both feasible and necessary for a more productive simulation environment. This paper defines LaRC requirements of a display software development tool and compares two available applications against these requirements. As a part of the software engineering process, these tools reduce development time, provide a common platform for display development, and produce exceptional real-time results.

  1. Designing intervention in educational game research

    DEFF Research Database (Denmark)

    Sørensen, Birgitte Holm; Magnussen, Rikke

    2010-01-01

    of game technology in educational settings: the game Global Conflict: Latin America, which is a role-playing game, set in a 3D environment. In the game, students play a freelance journalist who has to investigate particular issues or conflicts in the Latin American region. The game is designed to teach......The international focus on the learning potential of games in recent years has led to a boost in both academic research interest and the development of game formats. Numerous educational computer games are available for today’s teachers, but the implementation of games in everyday teaching is often...... problematic. In this paper, we argue that the focus on designing and implementing game-based learning environments in educational settings implies a need to rethink methodological questions on how to apply and study educational designs. We review the methodological approaches of design-based research...

  2. Designing intervention in educational game research

    DEFF Research Database (Denmark)

    Magnussen, Rikke; Sørensen, Birgitte Holm

    2010-01-01

    of game technology in educational settings: the game Global Conflict: Latin America, which is a role-playing game, set in a 3D environment. In the game, students play a freelance journalist who has to investigate particular issues or conflicts in the Latin American region. The game is designed to teach......The international focus on the learning potential of games in recent years has led to a boost in both academic research interest and the development of game formats. Numerous educational computer games are available for today's teachers, but the implementation of games in everyday teaching is often...... problematic. In this paper, we argue that the focus on designing and implementing game-based learning environments in educational settings implies a need to rethink methodological questions on how to apply and study educational designs. We review the methodological approaches of design-based research...

  3. Postclosure assessment as a design tool for waste disposal systems

    International Nuclear Information System (INIS)

    Goodwin, B.W.; Hajas, W.C.; LeNeveu, D.M.; Melnyk, T.W.

    1995-01-01

    AECL Research and Ontario Hydro share the responsibility to evaluate the feasibility and safety of the concept for the disposal of Canada's nuclear fuel waste. The concept involves deep underground disposal in crystalline rock on the Canadian Shield. AECL Research is currently preparing an Environmental Impact Statement for review by a federal Environmental Assessment Review Panel. In this paper, we present an example of how simulations performed for the postclosure assessment could influence the design and layout of the engineered system with respect to the structural features of its host rock formation. (author). 8 refs., 2 figs

  4. The Systems Biology Research Tool: evolvable open-source software

    Directory of Open Access Journals (Sweden)

    Wright Jeremiah

    2008-06-01

    Full Text Available Abstract Background Research in the field of systems biology requires software for a variety of purposes. Software must be used to store, retrieve, analyze, and sometimes even to collect the data obtained from system-level (often high-throughput experiments. Software must also be used to implement mathematical models and algorithms required for simulation and theoretical predictions on the system-level. Results We introduce a free, easy-to-use, open-source, integrated software platform called the Systems Biology Research Tool (SBRT to facilitate the computational aspects of systems biology. The SBRT currently performs 35 methods for analyzing stoichiometric networks and 16 methods from fields such as graph theory, geometry, algebra, and combinatorics. New computational techniques can be added to the SBRT via process plug-ins, providing a high degree of evolvability and a unifying framework for software development in systems biology. Conclusion The Systems Biology Research Tool represents a technological advance for systems biology. This software can be used to make sophisticated computational techniques accessible to everyone (including those with no programming ability, to facilitate cooperation among researchers, and to expedite progress in the field of systems biology.

  5. Research

    African Journals Online (AJOL)

    A descriptive qualitative research design was used to determine whether participants ... simulation as a teaching method; a manikin offering effective learning; confidence ..... Tesch R. Qualitative Research: Analysis Types and Software Tools.

  6. Gathering Requirements for Teacher Tools: Strategies for Empowering Teachers Through Co-Design

    Science.gov (United States)

    Matuk, Camillia; Gerard, Libby; Lim-Breitbart, Jonathan; Linn, Marcia

    2016-02-01

    Technology can enhance teachers' practice in multiple ways. It can help them better understand patterns in their students' thinking, manage class progress at individual and group levels, and obtain evidence to inform modifications to curriculum and instruction. Such technology is most effective when it is aligned with teachers' goals and expectations. Participatory methods, which involve teachers closely in the design process, are widely recommended for establishing accurate design requirements that address users' needs. By collaborating with researchers, teachers can contribute their professional expertise to shape the tools of their practice, and ultimately ensure their sustained use. However, there is little guidance available for maintaining effective teacher-researcher design partnerships. We describe four strategies for engaging teachers in designing tools intended to support and enhance their practice within a web-based science learning environment: discussing physical artifacts, reacting to scenarios, customizing prototypes, and writing user stories. Using design artifacts and documents of teachers' reflections, we illustrate how we applied these techniques over 5 years of annual professional development workshops, and examine their affordances for eliciting teachers' ideas. We reflect on how these approaches have helped inform technology refinements and innovations. We moreover discuss the further benefits these strategies have had in encouraging teachers to reflect on their own practice and on the roles of technology in supporting it; and in allowing researchers to gain a deeper understanding of the relationship between technology, teaching, and design.

  7. Designing interactive systems to support and augment creativity - a roadmap for research and design

    DEFF Research Database (Denmark)

    Dalsgaard, Peter; Halskov, Kim; Frich Pedersen, Jonas

    2018-01-01

    and developments, exemplary cases, and future initiatives to study and design systems and tools to augment creative practices. Participation in the workshop requires participants to contribute with a position paper on one of the above topics, and to read and comment on co-participants contributions before......The aims of the workshop are to examine and discuss the current state of research in designing interactive systems to support and augment creative work, and to outline a roadmap for future research initiatives. The workshop will explore methodological issues and approaches, overarching trends...

  8. Designing Effective Serious Games: Opportunities and Challenges for Research

    Directory of Open Access Journals (Sweden)

    Francesco Bellotti

    2010-11-01

    Full Text Available Serious Games represent an acknowledged potential for instruction, because they are able to strongly motivate learners. They can also provide immersive environments where advanced users can practice knowledge and skills, also exploiting multimodal interaction. They can combine the effectiveness of computer processing and data storage, with high levels of attractiveness. Our work has investigated the state of the art research on SGs, starting from the cognitive aspects, that are necessary in order to root technological development and applications in sound theoretical foundations. The paper discusses some key aspects about SG design and exploitation: choice of components-off-the-shelf or from-scratch design, tools and methodologies for development or adaptation, intelligent tutoring, virtual coaches and affective learning, living worlds, game mechanics, Human-Computer Interaction. While several SGs have been developed, still the literature stresses a lack of significant, extensive user tests. Further research is necessary to investigate in greater detail the real effectiveness of the various types of SGs. The paper proposes several research questions - that range from requirements elicitation to design and from deployment to use and evaluation - to be answered in order to avoid technology pushing and drive technological research according to the requirements of the end-users and stakeholders. We believe that deepening the analysis about these issues is key to strengthen the foundations of SG research, for which we identify four major directions: definition of metrics and learning progress evaluation tools; methodologies and tools for designing games from various topics and for various users; computing and communication architectures; technologies that can enhance the overall system performance.

  9. Transitions in Sustainable Product Design Research

    DEFF Research Database (Denmark)

    Boks, Casper; McAloone, Tim C.

    2009-01-01

    By the early 1990s, sustainable product innovation (or ecodesign, or Design for environment) had gained sufficient critical mass in academic research to be identified as a distinct research area. In the past 15 years, stimulated by a growing environmental concern and awareness in the media...... of transitions; this is illustrated by discussing characteristic aspects of each transition, which together provide a historic account of how academic research into sustainable product innovation had matured. In conclusion, a number of possible future transitions or extensions of the research area are discussed......., this research area has expanded considerably; from a bunch of opportunistic eco-pathfinders trying to make products better recyclable into acknowledged scientific research regarding technology transfer and commercialisation. This paper proposes that this maturing process took place through a number...

  10. Participatory design methods in telemedicine research

    DEFF Research Database (Denmark)

    Danbjørg, Dorthe Boe; Clemensen, Jane; Rothmann, Mette Juel

    together with the patients. Participatory design is a research design and methodology that encourages the participation of users in the design process of technological solutions. Therefore, it has a potential for designing technologies that actually reflect the needs of the users, why it is relevant within...... telemedicine. The aim of this presentation is to explain the process and theoretical framework of a PD project; give an example of a project including the applied methods, and to determine its application to telemedicine with focus on the rationale for genuine participation. Theory: Participation implies....... Methods: Key activities of a Participatory Design project comprise methods such as fieldwork; literature reviewing; development and testing, and user activities as workshops. Methods that support telling, making, enacting. For instance telling activities as drivers for participation, where practitioners...

  11. Medical informatics: an essential tool for health sciences research in acute care.

    Science.gov (United States)

    Li, Man; Pickering, Brian W; Smith, Vernon D; Hadzikadic, Mirsad; Gajic, Ognjen; Herasevich, Vitaly

    2009-10-01

    Medical Informatics has become an important tool in modern health care practice and research. In the present article we outline the challenges and opportunities associated with the implementation of electronic medical records (EMR) in complex environments such as intensive care units (ICU). We share our initial experience in the design, maintenance and application of a customized critical care, Microsoft SQL based, research warehouse, ICU DataMart. ICU DataMart integrates clinical and administrative data from heterogeneous sources within the EMR to support research and practice improvement in the ICUs. Examples of intelligent alarms -- "sniffers", administrative reports, decision support and clinical research applications are presented.

  12. Medical Informatics: An Essential Tool for Health Sciences Research in Acute Care

    Directory of Open Access Journals (Sweden)

    Man Li

    2009-10-01

    Full Text Available Medical Informatics has become an important tool in modern health care practice and research. In the present article we outline the challenges and opportunities associated with the implementation of electronic medical records (EMR in complex environments such as intensive care units (ICU. We share our initial experience in the design, maintenance and application of a customized critical care, Microsoft SQL based, research warehouse, ICU DataMart. ICU DataMart integrates clinical and administrative data from heterogeneous sources within the EMR to support research and practice improvement in the ICUs. Examples of intelligent alarms – “sniffers”, administrative reports, decision support and clinical research applications are presented.

  13. Game design research: an introduction to theory & practice

    OpenAIRE

    Lankoski, Petri; Holopainen, Jussi

    2017-01-01

    Design research is an active academic field covering disciplines such as architecture, graphic, product, service, interaction, and systems design. Design research aims to understand not only the designed end products but also how design as an activity unfolds. The book demonstrates different approaches to design research in game design research.

  14. Safety of research reactors (Design and Operation)

    International Nuclear Information System (INIS)

    Dirar, H. M.

    2012-06-01

    The primary objective of this thesis is to conduct a comprehensive up-to-date literature review on the current status of safety of research reactor both in design and operation providing the future trends in safety of research reactors. Data and technical information of variety selected historical research reactors were thoroughly reviewed and evaluated, furthermore illustrations of the material of fuel, control rods, shielding, moderators and coolants used were discussed. Insight study of some historical research reactors was carried with considering sample cases such as Chicago Pile-1, F-1 reactor, Chalk River Laboratories,. The National Research Experimental Reactor and others. The current status of research reactors and their geographical distribution, reactor category and utilization is also covered. Examples of some recent advanced reactors were studied like safety barriers of HANARO of Korea including safety doors of the hall and building entrance and finger print identification which prevent the reactor from sabotage. On the basis of the results of this research, it is apparent that a high quality of safety of nuclear reactors can be attained by achieving enough robust construction, designing components of high levels of efficiency, replacing the compounds of the reactor in order to avoid corrosion and degradation with age, coupled with experienced scientists and technical staffs to operate nuclear research facilities.(Author)

  15. IRC working on design tool to predict lighting effects

    Energy Technology Data Exchange (ETDEWEB)

    Koruluk, W.

    1996-01-01

    A three-year research project by the National Research Council`s Institute for Research in Construction (IRC) to assess how office workers react to different lighting conditions, was announced. A new facility, the first of its kind in Canada, was designed and constructed to simulate and examine all aspects of the indoor environment. The study will involve creating nine different lighting conditions to ascertain the relationship between the various lighting characteristics and people`s actual performance and satisfaction with lighting in the space. The objective is to determine whether reduced energy consumption, hence declining lighting conditions, affect job performance. It is hypothesized that significant losses in job performance, absenteeism, staff turnover or lost customers would far outweigh any savings in energy consumption.

  16. Synthetic Biology: Tools to Design, Build, and Optimize Cellular Processes

    Science.gov (United States)

    Young, Eric; Alper, Hal

    2010-01-01

    The general central dogma frames the emergent properties of life, which make biology both necessary and difficult to engineer. In a process engineering paradigm, each biological process stream and process unit is heavily influenced by regulatory interactions and interactions with the surrounding environment. Synthetic biology is developing the tools and methods that will increase control over these interactions, eventually resulting in an integrative synthetic biology that will allow ground-up cellular optimization. In this review, we attempt to contextualize the areas of synthetic biology into three tiers: (1) the process units and associated streams of the central dogma, (2) the intrinsic regulatory mechanisms, and (3) the extrinsic physical and chemical environment. Efforts at each of these three tiers attempt to control cellular systems and take advantage of emerging tools and approaches. Ultimately, it will be possible to integrate these approaches and realize the vision of integrative synthetic biology when cells are completely rewired for biotechnological goals. This review will highlight progress towards this goal as well as areas requiring further research. PMID:20150964

  17. Synthetic Biology: Tools to Design, Build, and Optimize Cellular Processes

    Directory of Open Access Journals (Sweden)

    Eric Young

    2010-01-01

    Full Text Available The general central dogma frames the emergent properties of life, which make biology both necessary and difficult to engineer. In a process engineering paradigm, each biological process stream and process unit is heavily influenced by regulatory interactions and interactions with the surrounding environment. Synthetic biology is developing the tools and methods that will increase control over these interactions, eventually resulting in an integrative synthetic biology that will allow ground-up cellular optimization. In this review, we attempt to contextualize the areas of synthetic biology into three tiers: (1 the process units and associated streams of the central dogma, (2 the intrinsic regulatory mechanisms, and (3 the extrinsic physical and chemical environment. Efforts at each of these three tiers attempt to control cellular systems and take advantage of emerging tools and approaches. Ultimately, it will be possible to integrate these approaches and realize the vision of integrative synthetic biology when cells are completely rewired for biotechnological goals. This review will highlight progress towards this goal as well as areas requiring further research.

  18. Synthetic biology: tools to design, build, and optimize cellular processes.

    Science.gov (United States)

    Young, Eric; Alper, Hal

    2010-01-01

    The general central dogma frames the emergent properties of life, which make biology both necessary and difficult to engineer. In a process engineering paradigm, each biological process stream and process unit is heavily influenced by regulatory interactions and interactions with the surrounding environment. Synthetic biology is developing the tools and methods that will increase control over these interactions, eventually resulting in an integrative synthetic biology that will allow ground-up cellular optimization. In this review, we attempt to contextualize the areas of synthetic biology into three tiers: (1) the process units and associated streams of the central dogma, (2) the intrinsic regulatory mechanisms, and (3) the extrinsic physical and chemical environment. Efforts at each of these three tiers attempt to control cellular systems and take advantage of emerging tools and approaches. Ultimately, it will be possible to integrate these approaches and realize the vision of integrative synthetic biology when cells are completely rewired for biotechnological goals. This review will highlight progress towards this goal as well as areas requiring further research.

  19. "Intelligent" tools for workflow process redesign : a research agenda

    NARCIS (Netherlands)

    Netjes, M.; Vanderfeesten, I.T.P.; Reijers, H.A.; Bussler, C.; Haller, A.

    2006-01-01

    Although much attention is being paid to business processes during the past decades, the design of business processes and particularly workflow processes is still more art than science. In this workshop paper, we present our view on modeling methods for workflow processes and introduce our research

  20. Building an mlearning research framework through design science research

    CSIR Research Space (South Africa)

    Ford, M

    2014-11-01

    Full Text Available The purpose of this paper is to provide an explanation of how Design Science research has been applied in order to develop a mobile learning framework for the ICT4RED project which is currently in progress in Cofimvaba in the Eastern Cape Province...

  1. Model-based fault diagnosis techniques design schemes, algorithms, and tools

    CERN Document Server

    Ding, Steven

    2008-01-01

    The objective of this book is to introduce basic model-based FDI schemes, advanced analysis and design algorithms, and the needed mathematical and control theory tools at a level for graduate students and researchers as well as for engineers. This is a textbook with extensive examples and references. Most methods are given in the form of an algorithm that enables a direct implementation in a programme. Comparisons among different methods are included when possible.

  2. Accounting Research as a didactic tool for a accounting teaching

    Directory of Open Access Journals (Sweden)

    Valeria Gisela Perez

    2016-06-01

    Full Text Available This paper develops a reflection about the importance of the research of accounting subjects in the professional accountants training, this importance is an attribute of research to increase the wealth of discipline under investigation, this can be converted into a skill and/or competence wich accountants are required to demonstrate in their professional practice.Furthermore, accounting is recognized by the authors as a science in constant development, being able to be investigated. This change in knowledge is an element that motivates professionals to be constantly updated, becoming this aspect (constant updating the skill and competence that research can bring to professional training in university classrooms.The reflection is based on the study of documents developed by prestigious authors in accounting theory, teaching and research.Therefore, this paper concludes that research is a useful tool for the professional accounting training, and rewards the important skills and competencies for professional practice; it can be conceived as well as a strategy for technical and educational activities that allows students to recreate knowledge, allowing future updates that will require their professional practice.Key words: Accounting research, university teaching, accounting education. 

  3. Research by Design: A paradigm shift?

    DEFF Research Database (Denmark)

    Verbeke, Johan

    2016-01-01

    In this paper we will argue that architectural research is becoming more and more important, not only in academia but also in architectural practice. Moreover, a shift is taking place from using and absorbing research methods from other disciplines towards building on the own specific strength...... of the discipline of architecture, i.e. using design and creative practice as a method to generate knowledge and disclose unknown aspects of reality. In doing so, this paper tries to place the Delft ARENA meeting Architectural Research Network Meeting (November 2013) in perspective....

  4. A Computational Lens on Design Research

    Science.gov (United States)

    Hoyles, Celia; Noss, Richard

    2015-01-01

    In this commentary, we briefly review the collective effort of design researchers to weave theory with empirical results, in order to gain a better understanding of the processes of learning. We seek to respond to this challenging agenda by centring on the evolution of one sub-field: namely that which involves investigations within a…

  5. Educational Design Research: Signs of Progress

    Science.gov (United States)

    Reeves, Thomas C.

    2015-01-01

    This special issue of the "Australasian Journal of Educational Technology" includes an introductory article by the guest editors and six papers that illustrate the potential of educational design research (EDR) to address important problems in higher education. In this final paper, reflections on the papers are made. Then the rationale…

  6. Design, Research, and Feminism(s)'

    DEFF Research Database (Denmark)

    Jönsson, Li; Lindström, Kristina; Mazé, Ramia

    2018-01-01

    into practice-based, interventionist and activist modalities to propose, materialize and experience how things may become “otherwise”. This track invite contributions exploring notions of criticality and, or, feminism in design research. Possible topics among others may include: • feminist perspectives...

  7. Design research into mobile museum mediation

    DEFF Research Database (Denmark)

    Baggesen, Rikke Haller

    2013-01-01

    community. 
The PhD research project “Mobile Mediation of Fashion by Museums” explores how aesthetic and ethnographic design methods can be used to develop mobile experiences and articulate museological matters of concern. Building on user perspectives, expressed in response to cultural probes, the project...

  8. Designing and Conducting Health Systems Research Projects ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Home · Resources · Publications. Designing and Conducting Health Systems Research Projects Volume 1: Proposal Development and Fieldwork ... IDRC and the United Kingdom's Global AMR Innovation Fund—managed by the ... New website will help record vital life events to improve access to services for all.

  9. Enabling biomedical research with designer quantum dots

    NARCIS (Netherlands)

    Tomczak, N.; Janczewski, D.; Dorokhin, D.V.; Han, M-Y; Vancso, Gyula J.; Navarro, Melba; Planell, Josep A.

    2012-01-01

    Quantum Dots (QDs) are a new class of semiconductor nanoparticulate luminophores, which are actively researched for novel applications in biology and nanomedicine. In this review, the recent progress in the design and applications of QD labels for in vitro and in vivo imaging of cells is presented.

  10. An Introduction to Experimental Design Research

    DEFF Research Database (Denmark)

    Cash, Philip; Stanković, Tino; Štorga, Mario

    2016-01-01

    Design research brings together influences from the whole gamut of social, psychological, and more technical sciences to create a tradition of empirical study stretching back over 50 years (Horvath 2004; Cross 2007). A growing part of this empirical tradition is experimental, which has gained in ...

  11. Tradeoffs in Design Research: Development Oriented Triangulation

    NARCIS (Netherlands)

    Koen van Turnhout; Sabine Craenmehr; Robert Holwerda; Mark Menijn; Jan-Pieter Zwart; René Bakker

    2013-01-01

    The Development Oriented Triangulation (DOT) framework in this paper can spark and focus the debate about mixed-method approaches in HCI. The framework can be used to classify HCI methods, create mixed-method designs, and to align research activities in multidisciplinary projects. The framework is

  12. Electric gun: a new tool for ultrahigh-pressure research

    International Nuclear Information System (INIS)

    Weingart, R.C.; Chau, H.H.; Goosman, D.R.; Hofer, W.W.; Honodel, C.A.; Lee, R.S.; Steinberg, D.J.; Stroud, J.R.

    1979-01-01

    We have developed a new tool for ultrahigh-pressure research at LLL. This system, which we call the electric gun, has already achieved thin flyer plate velocities in excess of 20 km/s and pressures of the order of 2 TPa in tantalum. We believe that the electric gun is competitive with laser- and nuclear-driven methods of producing shocks in the 1-to-5 TPa range because of its precision and ease and economy of operation. Its development is recommended for shock initiation studies, dry runs for Site 300 hydroshots, and as a shock wave generator for surface studies

  13. Wireless and photonic high-speed communication technologies, circuits and design tools

    DEFF Research Database (Denmark)

    Krozer, Viktor; Johansen, Tom Keinicke; Jiang, Chenhui

    2009-01-01

    were reported. These communication systems present new challenges for circuit designers. The presentation will be devoted to technologies and various aspects of circuit design for 100 G applications. We will present overview on wired and wireless systems demonstrating the challenges of this research...... including design challenges, relevant trade-offs and the present bottlenecks. Different system architectures will be presented with their impact on component requirements. Similarities and differences of wired and wireless applications will be pointed out. Design methodologies, necessary tools and circuit...... are fundamental to emerging consumer and professional applications. These systems start to emerge as near future applications and are subject of ongoing research activities in Europe, for example within the EU FP6 GIBON project. Wireless systems with over 100 GHz carriers as well as first over 100-G fibre systems...

  14. Geo-environmental mapping tool applied to pipeline design

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Karina de S.; Calle, Jose A.; Gil, Euzebio J. [Geomecanica S/A Tecnologia de Solo Rochas e Materiais, Rio de Janeiro, RJ (Brazil); Sare, Alexandre R. [Geomechanics International Inc., Houston, TX (United States); Soares, Ana Cecilia [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2009-07-01

    The Geo-Environmental Mapping is an improvement of the Geological-Geotechnical Mapping used for basic pipeline designs. The main purpose is to assembly the environmental, geotechnical and geological concepts in a methodological tool capable to predict constrains and reduce the pipeline impact to the environment. The Geo-Environmental mapping was built to stress the influence of soil/structure interaction, related to the physical effect that comes from the contact between structures and soil or rock. A Geological-Geotechnical-Environmental strip (chart) was presented to emphasize the pipeline operational constrains and its influence to the environment. The mapping was developed to clearly show the occurrence and properties of geological materials divided into geotechnical domain units (zones). The strips present construction natural properties, such as: excavability, stability of the excavation and soil re-use capability. Also, the environmental constrains were added to the geological-geotechnical mapping. The Geo-Environmental Mapping model helps the planning of the geotechnical and environmental inquiries to be carried out during executive design, the discussion on the types of equipment to be employed during construction and the analysis of the geological risks and environmental impacts to be faced during the built of the pipeline. (author)

  15. Conceptual design of multipurpose compact research reactor

    International Nuclear Information System (INIS)

    Nagata, Hiroshi; Kusunoki, Tsuyoshi; Hori, Naohiko; Kaminaga, Masanori

    2012-01-01

    Conceptual design of the high-performance and low-cost multipurpose compact research reactor which will be expected to construct in the nuclear power plant introduction countries, started from 2010 in JAEA and nuclear-related companies in Japan. The aims of this conceptual design are to achieve highly safe reactor, economical design, high availability factor and advanced irradiation utilization. One of the basic reactor concept was determined as swimming pool type, thermal power of 10MW and water cooled and moderated reactor with plate type fuel element same as the JMTR. It is expected that the research reactors are used for human resource development, progress of the science and technology, expansion of industry use, lifetime extension of LWRs and so on. (author)

  16. Performance Evaluation of a Software Engineering Tool for Automated Design of Cooling Systems in Injection Moulding

    DEFF Research Database (Denmark)

    Jauregui-Becker, Juan M.; Tosello, Guido; van Houten, Fred J.A.M.

    2013-01-01

    This paper presents a software tool for automating the design of cooling systems for injection moulding and a validation of its performance. Cooling system designs were automatically generated by the proposed software tool and by applying a best practice tool engineering design approach. The two...

  17. Conceptual design of Dipole Research Experiment (DREX)

    Science.gov (United States)

    Xiao, Qingmei; Wang, Zhibin; Wang, Xiaogang; Xiao, Chijie; Yang, Xiaoyi; Zheng, Jinxing

    2017-03-01

    A new terrella-like device for laboratory simulation of inner magnetosphere plasmas, Dipole Research Experiment, is scheduled to be built at the Harbin Institute of Technology (HIT), China, as a major state scientific research facility for space physics studies. It is designed to provide a ground experimental platform to reproduce the inner magnetosphere to simulate the processes of trapping, acceleration, and transport of energetic charged particles restrained in a dipole magnetic field configuration. The scaling relation of hydromagnetism between the laboratory plasma of the device and the geomagnetosphere plasma is applied to resemble geospace processes in the Dipole Research Experiment plasma. Multiple plasma sources, different kinds of coils with specific functions, and advanced diagnostics are designed to be equipped in the facility for multi-functions. The motivation, design criteria for the Dipole Research Experiment experiments and the means applied to generate the plasma of desired parameters in the laboratory are also described. Supported by National Natural Science Foundation of China (Nos. 11505040, 11261140326 and 11405038), China Postdoctoral Science Foundation (Nos. 2016M591518, 2015M570283) and Project Supported by Natural Scientific Research Innovation Foundation in Harbin Institute of Technology (No. 2017008).

  18. Managing complex research datasets using electronic tools: A meta-analysis exemplar

    Science.gov (United States)

    Brown, Sharon A.; Martin, Ellen E.; Garcia, Theresa J.; Winter, Mary A.; García, Alexandra A.; Brown, Adama; Cuevas, Heather E.; Sumlin, Lisa L.

    2013-01-01

    Meta-analyses of broad scope and complexity require investigators to organize many study documents and manage communication among several research staff. Commercially available electronic tools, e.g., EndNote, Adobe Acrobat Pro, Blackboard, Excel, and IBM SPSS Statistics (SPSS), are useful for organizing and tracking the meta-analytic process, as well as enhancing communication among research team members. The purpose of this paper is to describe the electronic processes we designed, using commercially available software, for an extensive quantitative model-testing meta-analysis we are conducting. Specific electronic tools improved the efficiency of (a) locating and screening studies, (b) screening and organizing studies and other project documents, (c) extracting data from primary studies, (d) checking data accuracy and analyses, and (e) communication among team members. The major limitation in designing and implementing a fully electronic system for meta-analysis was the requisite upfront time to: decide on which electronic tools to use, determine how these tools would be employed, develop clear guidelines for their use, and train members of the research team. The electronic process described here has been useful in streamlining the process of conducting this complex meta-analysis and enhancing communication and sharing documents among research team members. PMID:23681256

  19. ARM Climate Research Facility: Outreach Tools and Strategies

    Science.gov (United States)

    Roeder, L.; Jundt, R.

    2009-12-01

    Sponsored by the Department of Energy, the ARM Climate Research Facility is a global scientific user facility for the study of climate change. To publicize progress and achievements and to reach new users, the ACRF uses a variety of Web 2.0 tools and strategies that build off of the program’s comprehensive and well established News Center (www.arm.gov/news). These strategies include: an RSS subscription service for specific news categories; an email “newsletter” distribution to the user community that compiles the latest News Center updates into a short summary with links; and a Facebook page that pulls information from the News Center and links to relevant information in other online venues, including those of our collaborators. The ACRF also interacts with users through field campaign blogs, like Discovery Channel’s EarthLive, to share research experiences from the field. Increasingly, field campaign Wikis are established to help ACRF researchers collaborate during the planning and implementation phases of their field studies and include easy to use logs and image libraries to help record the campaigns. This vital reference information is used in developing outreach material that is shared in highlights, news, and Facebook. Other Web 2.0 tools that ACRF uses include Google Maps to help users visualize facility locations and aircraft flight patterns. Easy-to-use comment boxes are also available on many of the data-related web pages on www.arm.gov to encourage feedback. To provide additional opportunities for increased interaction with the public and user community, future Web 2.0 plans under consideration for ACRF include: evaluating field campaigns for Twitter and microblogging opportunities, adding public discussion forums to research highlight web pages, moving existing photos into albums on FlickR or Facebook, and building online video archives through YouTube.

  20. Operations other than war: Requirements for analysis tools research report

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, D.S. III

    1996-12-01

    This report documents the research effort to determine the requirements for new or improved analysis tools to support decisions at the strategic and operational levels for military Operations Other than War (OOTW). The work was performed for the Commander in Chief, U.S. Pacific Command (USCINCPAC). The data collection was based on workshops attended by experts in OOTWs: analysis personnel from each of the Combatant Commands, the Services, the Office of the Secretary of Defense (OSD), the Joint Staff, and other knowledgeable personnel. Further data were gathered from other workshops and conferences and from the literature. The results of this research begin with the creation of a taxonomy of OOTWs: categories of operations, attributes of operations, and tasks requiring analytical support. The tasks are connected to the Joint Staff`s Universal Joint Task List (UJTL). Historical OOTWs are analyzed to produce frequency distributions by category and responsible CINC. The analysis products are synthesized into a list of requirements for analytical tools and definitions of the requirements. The report concludes with a timeline or roadmap for satisfying the requirements.