An Ethnography of the Navajo Reproductive Cycle.

Science.gov (United States)

Wright, Anne

1982-01-01

Describes the reproductive cycle (menarche, menstrual cycle, fertility and contraceptive use, and menopause) as experienced by two groups of contemporary Navajo women. Eighty Navajo women, 40 traditional and 40 acculturated, participated in the 1978 research project which focused on influences of menopause. (ERB)

Life Cycle Management

DEFF Research Database (Denmark)

Bey, Niki

2018-01-01

This chapter gives an overview of Life Cycle Management (LCM)—a discipline that deals with the managerial tasks related to practicing sustainable development in an organisation . Just as Life Cycle Assessment, LCM advocates the life cycle perspective , and it applies this perspective in decision...

Life cycle and reproductive patterns of Triatoma rubrovaria (Blanchard, 1843 (Hemiptera: Reduviidae under constant and fluctuating conditions of temperature and humidity

Directory of Open Access Journals (Sweden)

Damborsky Miryam P.

2005-01-01

Full Text Available The aim of this study was to evaluate the temperature and relative humidity influence in the life cycle, mortality and fecundity patterns of Triatoma rubrovaria. Four cohorts with 60 recently laid eggs each were conformed. The cohorts were divided into two groups. In the controlled conditions group insects were maintained in a dark climatic chamber under constant temperature and humidity, whereas triatomines of the ambiental temperature group were maintained at room temperature. Average incubation time was 15.6 days in the controlled conditions group and 19.1 days in the ambiental temperature. In group controlled conditions the time from egg to adult development lasted 10 months while group ambiental temperature took four months longer. Egg eclosion rate was 99.1% and 98.3% in controlled conditions and ambiental temperature, respectively. Total nymphal mortality in controlled conditions was 52.6% whereas in ambiental temperature was 51.8%. Mean number of eggs/female was 817.6 controlled conditions and 837.1 ambiental temperature. Fluctuating temperature and humidity promoted changes in the life cycle duration and in the reproductive performance of this species, although not in the species mortality.

Reproductive cycles of largemouth bass (Micropterus salmoides) in a cooling reservoir

International Nuclear Information System (INIS)

Bennett, D.H.; Gibbons, J.W.

1975-01-01

Annual reproductive cycles of largemouth bass (Micropterus salmoides) collected in the heated area of a 1120-hectare reservoir receiving thermal effluent from the Savannah River Plant were similar to cycles from bass collected in unheated waters during 1969 and 1970. Average maximum monthly temperatures at the heated area exceeded those in unheated waters by greater than 10 0 C for the 2 years. Few monthly differences in gonosomatic indices were found between heated and unheated areas. Earlier attainment of maximum gonadal size and the presence of significantly larger juvenile bass at the heated area suggested that reproduction might be accelerated by thermal discharge. However, gonadal condition indicated that the reproductive period started in March and continued through April in both areas. Reproduction may have been advanced in some heated-area bass, although this was not obvious from overall changes in the reproductive cycles of bass from unheated areas. (auth)

Reproductive cycle of the Namib giant ground gecko ...

African Journals Online (AJOL)

The reproductive cycle of the Namib giant ground gecko, Chondrodactylus angulifer, from southern Africa was described from a histological examination of gonadal material from museum specimens. Males followed a seasonal testicular cycle in which (based on available specimens) the major period of spermiogenesis ...

Leptin and its potential interest in assisted reproduction cycles.

Science.gov (United States)

Catteau, A; Caillon, H; Barrière, P; Denis, M G; Masson, D; Fréour, T

2016-04-01

Leptin, an adipose hormone, has been shown to control energy homeostasis and food intake, and exert many actions on female reproductive function. Consequently, this adipokine is a pivotal factor in studies conducted on animal models and humans to decipher the mechanisms behind the infertility often observed in obese women. A systematic PubMed search was conducted on all articles, published up to January 2015 and related to leptin and its actions on energy balance and reproduction, using the following key words: leptin, reproduction, infertility, IVF and controlled ovarian stimulation. The available literature was reviewed in order to provide an overview of the current knowledge on the physiological roles of leptin, its involvement in female reproductive function and its potential interest as a prognostic marker in IVF cycles. Animal and human studies show that leptin communicates nutritional status to the central nervous system and emerging evidence has demonstrated that leptin is involved in the control of reproductive functions by acting both directly on the ovaries and indirectly on the central nervous system. With respect to the clinical use of leptin as a biomarker in IVF cycles, a systematic review of the literature suggested its potential interest as a predictor of IVF outcome, as high serum and/or follicular fluid leptin concentrations have correlated negatively with cycle outcome. However, these preliminary results remain to be confirmed. Leptin regulates energy balance and female reproductive function, mainly through its action on hypothalamic-pituitary-ovarian function, whose molecular and cellular aspects are progressively being deciphered. Preliminary studies evaluating leptin as a biomarker in human IVF seem promising but need further confirmation. © The Author 2015. Published by Oxford University Press on behalf of the European Society of Human Reproduction and Embryology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Life span and reproductive cost explain interspecific variation in the optimal onset of reproduction.

Science.gov (United States)

Mourocq, Emeline; Bize, Pierre; Bouwhuis, Sandra; Bradley, Russell; Charmantier, Anne; de la Cruz, Carlos; Drobniak, Szymon M; Espie, Richard H M; Herényi, Márton; Hötker, Hermann; Krüger, Oliver; Marzluff, John; Møller, Anders P; Nakagawa, Shinichi; Phillips, Richard A; Radford, Andrew N; Roulin, Alexandre; Török, János; Valencia, Juliana; van de Pol, Martijn; Warkentin, Ian G; Winney, Isabel S; Wood, Andrew G; Griesser, Michael

2016-02-01

Fitness can be profoundly influenced by the age at first reproduction (AFR), but to date the AFR-fitness relationship only has been investigated intraspecifically. Here, we investigated the relationship between AFR and average lifetime reproductive success (LRS) across 34 bird species. We assessed differences in the deviation of the Optimal AFR (i.e., the species-specific AFR associated with the highest LRS) from the age at sexual maturity, considering potential effects of life history as well as social and ecological factors. Most individuals adopted the species-specific Optimal AFR and both the mean and Optimal AFR of species correlated positively with life span. Interspecific deviations of the Optimal AFR were associated with indices reflecting a change in LRS or survival as a function of AFR: a delayed AFR was beneficial in species where early AFR was associated with a decrease in subsequent survival or reproductive output. Overall, our results suggest that a delayed onset of reproduction beyond maturity is an optimal strategy explained by a long life span and costs of early reproduction. By providing the first empirical confirmations of key predictions of life-history theory across species, this study contributes to a better understanding of life-history evolution. © 2016 The Author(s). Evolution © 2016 The Society for the Study of Evolution.

Comparative life cycles and life histories of North American Rhabdias spp. (Nematoda: Rhabdiasidae): lungworms from snakes and anurans.

Science.gov (United States)

Langford, Gabriel J; Janovy, John

2009-10-01

The present study used experimental infections to compare the life cycles and life histories of 6 Rhabdias spp. infecting snakes and anurans. Free-living development of anuran lungworms was primarily limited to heterogonic reproduction, and females utilized matricidal endotoky exclusively, whereas snake lungworms primarily reproduced homogonically and, when heterogonic reproduction occurred, females used a combination of releasing eggs and matricidal endotoky. Infective snake lungworms survived for longer periods in fresh water compared to anuran worms. Infective anuran lungworms penetrated into the skin of frogs and toads; few infections resulted from per os infections. In contrast, snake lungworms were unable to penetrate skin; instead, infective juveniles penetrated into snake esophageal tissue during per os infections. Despite separate points of entry, anuran and snake lungworms both migrated and developed in the fascia, eventually penetrating into the body cavity of the host. Worms molted to adulthood inside the body cavity and subsequently penetrated into the host's lungs, where they fed on blood while becoming gravid. Adult lungworm survival varied among lungworm species, but, in general, snake lungworms were longer lived than anuran worms. Anuran lungworms were poorly suited for transmission via transport hosts, whereas snake lungworms were consistently capable of establishing infections using transport hosts. Overall, these observations suggest that snake and anuran lungworms have discrepant life cycles and life history strategies.

LIFE CYCLE OF INFORMATION SYSTEMS

Directory of Open Access Journals (Sweden)

Y. S. Sennik

2015-01-01

Full Text Available This work is a generalization of the theoretical propositions related to the life cycle of information systems. There was given the definition of the life cycle, specify which items you should include every step of the cycle. Describes the methodology division of the life cycle on the main stage, including methodology Rational Unified Process. The description of the fundamental standards in this area. Special attention was paid to the work of the basic life cycle models. It was carried out their comparative characteristics. On the basis of the theoretical propositions, it was concluded that the preferred model of the life cycle for the corporate network is a spiral model and the use of international standards in the life cycle saves a lot of effort, time and material resources.

Obsessive-compulsive disorder and female reproductive cycle events: results from the OCD and reproduction collaborative study.

Science.gov (United States)

Guglielmi, Valeria; Vulink, Nienke C C; Denys, Damiaan; Wang, Ying; Samuels, Jack F; Nestadt, Gerald

2014-12-01

Women with obsessive-compulsive disorder (OCD) often report that symptoms first appear or exacerbate during reproductive cycle events; however, little is known about these relationships. The goals of this study were to examine, in a US and a European female OCD sample, onset and exacerbation of OCD in reproductive cycle events, and to investigate the likelihood of repeat exacerbation in subsequent pregnancies and postpartum periods. Five hundred forty-two women (United States, n = 352; Dutch, n = 190) who met DSM-IV criteria for OCD, completed self-report questionnaires designed to assess OCD onset and symptom exacerbation associated with reproductive events. OCD onset occurred within 12 months after menarche in 13.0%, during pregnancy in 5.1%, at postpartum in 4.7%, and at menopause in 3.7%. Worsening of pre-existing OCD was reported by 37.6% of women at premenstruum, 33.0% during pregnancy, 46.6% postpartum, and 32.7% at menopause. Exacerbation in first pregnancy was significantly associated with exacerbation in second pregnancy (OR = 10.82, 95% CI 4.48-26.16), as was exacerbation in first postpartum with exacerbation in second postpartum (OR = 6.86, 95% CI 3.27-14.36). Results were replicated in both samples. Reproductive cycle events are periods of increased risk for onset and exacerbation of OCD in women. The present study is the first to provide significant evidence that exacerbation in or after first pregnancy is a substantial risk factor for exacerbation in or after a subsequent pregnancy. Further research is needed to identify factors related to exacerbation, so that physicians may provide appropriate recommendations to women regarding clinical issues involving OCD and reproductive cycle events. © 2014 Wiley Periodicals, Inc.

KOH concentration effect on cycle life of nickel-hydrogen cells. III - Cycle life test

Science.gov (United States)

Lim, H. S.; Verzwyvelt, S. A.

1988-01-01

A cycle life test of Ni/H2 cells containing electrolytes of various KOH concentrations and a sintered type nickel electrode was carried out at 23 C using a 45 min accelerated low earth orbit (LEO) cycle regime at 80 percent depth of discharge. One of three cells containing 26 percent KOH has achieved over 28,000 cycles, and the other two 19,000 cycles, without a sign of failure. Two other cells containing 31 percent KOH electrolyte, which is the concentration presently used in aerospace cells, failed after 2,979 and 3,620 cycles. This result indicates that the cycle life of the present type of Ni/H2 cells may be extended by a factor of 5 to 10 simply by lowering the KOH concentration. Long cycle life of a Ni/H2 battery at high depth-of-discharge operation is desired, particularly for an LEO spacecraft application. Typically, battery life of about 30,000 cycles is required for a five year mission in an LEO. Such a cycle life with presently available cells can be assured only at a very low depth-of-discharge operation. Results of testing already show that the cycle life of an Ni/H2 cell is tremendously improved by simply using an electrolyte of low KOH concentration.

Luteal phase support for assisted reproduction cycles

NARCIS (Netherlands)

Linden, M. van der; Buckingham, K.; Farquhar, C.; Kremer, J.A.M.; Metwally, M.

2015-01-01

BACKGROUND: Progesterone prepares the endometrium for pregnancy by stimulating proliferation in response to human chorionic gonadotropin(hCG) produced by the corpus luteum. This occurs in the luteal phase of the menstrual cycle. In assisted reproduction techniques(ART), progesterone and/or hCG

Luteal phase support for assisted reproduction cycles

NARCIS (Netherlands)

Linden, M. Van der; Buckingham, K.; Farquhar, C.; Kremer, J.A.M.; Metwally, M.

2011-01-01

BACKGROUND: Progesterone prepares the endometrium for pregnancy by stimulating proliferation in response to human chorionic gonadotropin (hCG), which is produced by the corpus luteum. This occurs in the luteal phase of the menstrual cycle. In assisted reproduction techniques (ART) the progesterone

Variations in the Life Cycle of Anemone patens L. (Ranunculaceae in Wild Populations of Canada

Directory of Open Access Journals (Sweden)

Vladimir Kricsfalusy

2016-06-01

Full Text Available Based on a study of a perennial herb Anemone patens L. (Ranunculaceae in a variety of natural habitats in Saskatchewan, Canada, eight life stages (seed, seedling, juvenile, immature, vegetative, generative, subsenile, and senile are distinguished and characterized in detail. The species ontogenetic growth patterns are investigated. A. patens has a long life cycle that may last for several decades which leads to the formation of compact clumps. The distribution and age of clumps vary substantially in different environments with different levels of disturbance. The plant ontogeny includes the regular cycle with reproduction occurring through seeds. There is an optional subsenile vegetative disintegration at the end of the life span. The following variations in the life cycle of A. patens are identified: with slower development in young age, with an accelerated development, with omission of the generative stage, with retrogression to previous life stages in mature age, and with vegetative dormancy. The range of variations in the life cycle of A. patens may play an important role in maintaining population stability in different environmental conditions and management regimes.

An integrated life cycle inventory for demolition processes in the context of life cycle sustainability assessment

DEFF Research Database (Denmark)

Bozhilova-Kisheva, Kossara Petrova; Hu, Mingming; van Roekel, Eric

2012-01-01

According to the Life Cycle Assessment in Building and Construction: State-of-the-Art Report (2003), the dismantling and demolition stage of the building life cycle is only sometimes included in the Life Cycle Inventory (LCI) when doing Life Cycle Assessments (LCA). The reason that it is less...... inventoried in a traditional LCA maybe because this stage is expected to have a negligible environmental impact comparing to other stages in the life cycle of the buildings. When doing a life cycle sustainability assessment considering not only environmental but also economic and social impacts, the impacts...

Cycle 1 as predictor of assisted reproductive technology treatment outcome over multiple cycles: an analysis of linked cycles from the Society for Assisted Reproductive Technology Clinic Outcomes Reporting System online database.

Science.gov (United States)

Stern, Judy E; Brown, Morton B; Luke, Barbara; Wantman, Ethan; Lederman, Avi; Hornstein, Mark D

2011-02-01

To determine whether the first cycle of assisted reproductive technology (ART) predicts treatment course and outcome. Retrospective study of linked cycles. Society for Assisted Reproductive Technology Clinic Outcome Reporting System database. A total of 6,352 ART patients residing or treated in Massachusetts with first treatment cycle in 2004-2005 using fresh, autologous oocytes and no prior ART. Women were categorized by first cycle as follows: Group I, no retrieval; Group II, retrieval, no transfer; Group III, transfer, no embryo cryopreservation; Group IV, transfer plus cryopreservation; and Group V, all embryos cryopreserved. None. Cumulative live-birth delivery per woman, use of donor eggs, intracytoplasmic sperm injection (ICSI), or frozen embryo transfers (FET). Groups differed in age, baseline FSH level, prior gravidity, diagnosis, and failure to return for Cycle 2. Live-birth delivery per woman for groups I through V for women with no delivery in Cycle I were 32.1%, 35.9%, 40.1%, 53.4%, and 51.3%, respectively. Groups I and II were more likely to subsequently use donor eggs (14.5% and 10.9%). Group II had the highest use of ICSI (73.3%); Group III had the lowest use of FET (8.9%). Course of treatment in the first ART cycle is related to different cumulative live-birth delivery rates and eventual use of donor egg, ICSI, and FET. Copyright © 2011 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Reporting multiple cycles in trials on medically assisted reproduction

NARCIS (Netherlands)

Scholten, Irma; Braakhekke, Miriam; Limpens, Jacqueline; Hompes, Peter G. A.; van der Veen, Fulco; Mol, Ben W. J.; Gianotten, Judith

2016-01-01

Trials assessing effectiveness in medically assisted reproduction (MAR) should aim to study the desired effect over multiple cycles, as this reflects clinical practice and captures the relevant perspective for the couple. The aim of this study was to assess the extent to which multiple cycles are

[Life cycles of ground beetles (Coleoptera, Carabidae) from the mountain taiga and mountain forest-steppe in the Eastern Sayan].

Science.gov (United States)

Khobrakova, L Ts; Sharova, I Kh

2005-01-01

Seasonal dynamics and demographic structure was studied in 15 dominant ground beetle species in the mountain taiga and mountain forest-steppe belts of the Eastern Sayan (Okinskoe Plateau). Life cycles of the dominant ground beetle species were classified by developmental time, seasonal dynamics, and intrapopulation groups with different reproduction timing. The strategies of carabid life cycles adapted to severe mountain conditions of the Eastern Sayan were revealed.

Life cycle of lithobiidae - with a discussion of the r-and K-selection theory.

Science.gov (United States)

Albert, Anke M

1983-02-01

The life cycle of two lithobiid species (Chilopoda: Lithobiidae) Lithobius mutabilis L. Koch and L. curtipes C.L. Koch in an old beech stand in the Solling is described. In addition to a main egg-laying period lithobiids are able to lay eggs continuously throughout the year. The reproductive potential is small, as only one egg is laid over several days. Most juveniles hatch in the spring and over-winter as L3 or L4 larvae. Epimorph development to attainment of sexual maturity takes nearly 2 years. Adult L. mutablilis live a further 2 years or more, adult L. curtipes about 1 year or more. Total life span is about 5-6 years for L. mutabilis and 4-5 years for L. curtipes. Egg development times and instar durations can be very different for different animals. Mortality is relatively high for eggs and small juveniles and low for post larval instars except the very old animals. A method is presented for construction of a survivorship curve from monthly abundance figures. Due to their slow development, late attainment of reproductive period, long reproductive phase, low reproductive potential, long life span, low mortality of post larval instars except very old animals, lithobiids can be regarded as K-strategists or, better, equilibrium species, among the arthropods. It is argued that the theory of r- and K-selection in its general use is not sufficient for a description of the ecological strategies of animals such as Lithobiomorpha. For lithobiids, variability in development time is a very important means of keeping population size at a constant level. The life cycle of the two lithobiid species is compared with ahat of Geophilomorpha and one henicopid species also occurring in the Solling.

Life cycle and reproduction of house-dust mites: environmental factors influencing mite populations.

Science.gov (United States)

Hart, B J

1998-01-01

An understanding of the life cycle of house-dust mites, as well as environmental factors influencing mite populations, can be exploited in mite control. The most important limiting factor for house-dust-mite populations is air humidity. House-dust mites osmoregulate through the cuticle and therefore require a high ambient air humidity to prevent excessive water loss. In addition, the supracoxal glands actively take up ambient water vapour, and the protonynph stage of the life cycle is resistant to desiccation. Larger house-dust-mite populations are found when the absolute indoor air humidity is above 7 g/kg (45% relative humidity at 20 degrees C). Consequently, ventilation by air-conditioning systems is being developed as a means of control. A number of other aspects of the domestic environment are also being manipulated in an integrated approach to render the habitat less suitable for mites. The potential exists for developing models for house-dust mite populations, environmental characteristics, and the effects of various approaches to control.

Transportation life cycle assessment (LCA) synthesis : life cycle assessment learning module series.

Science.gov (United States)

2015-03-12

The Life Cycle Assessment Learning Module Series is a set of narrated, self-advancing slideshows on : various topics related to environmental life cycle assessment (LCA). This research project produced the first 27 of such modules, which : are freely...

Obesity in women – a life cycle of medical risk | van der Merwe ...

African Journals Online (AJOL)

Obesity can have an impact on health at each stage of a woman's life cycle. In young women, obesity has an impact on psychosocial health and, as they grow older, on their reproductive health. Obesity also imposes a number of serious risks during pregnancy. In older women, obesity is associated with the emergence of a ...

Life cycle assessment (LCA)

DEFF Research Database (Denmark)

Thrane, Mikkel; Schmidt, Jannick Andresen

2004-01-01

The chapter introduces Life Cycle Assessment (LCA) and its application according to the ISO 1404043 standards.......The chapter introduces Life Cycle Assessment (LCA) and its application according to the ISO 1404043 standards....

Differences in pigmentation between life cycle stages in Scrippsiella lachrymosa (dinophyceae).

Science.gov (United States)

Persson, Agneta; Smith, Barry C; Cyronak, Tyler; Cooper, Emily; DiTullio, Giacomo R

2016-02-01

Various life cycle stages of cyst-producing dinoflagellates often appear differently colored under the microscope; gametes appear paler while zygotes are darker in comparison to vegetative cells. To compare physiological and photochemical competency, the pigment composition of discrete life cycle stages was determined for the common resting cyst-producing dinoflagellate Scrippsiella lachrymosa. Vegetative cells had the highest cellular pigment content (25.2 ± 0.5 pg · cell(-1) ), whereas gamete pigment content was 22% lower. The pigment content of zygotes was 82% lower than vegetative cells, even though they appeared darker under the microscope. Zygotes of S. lachrymosa contained significantly higher cellular concentrations of β-carotene (0.65 ± 0.15 pg · cell(-1) ) than all other life stages. Photoprotective pigments and the de-epoxidation ratio of xanthophylls-cycle pigments in S. lachrymosa were significantly elevated in zygotes and cysts compared to other stages. This suggests a role for accessory pigments in combating intracellular oxidative stress during sexual reproduction or encystment. Resting cysts contained some pigments even though chloroplasts were not visible, suggesting that the brightly colored accumulation body contained photosynthetic pigments. The differences in pigmentation between life stages have implications for interpretation of pigment data from field samples when sampled during dinoflagellate blooms. © 2015 Phycological Society of America.

Life Cycle Sustainability Dashboard

DEFF Research Database (Denmark)

Traverso, Marzia; Finkbeiner, Matthias; Jørgensen, Andreas

2012-01-01

One method to assess the sustainability performance of products is life cycle sustainability assessment (LCSA), which assesses product performance considering the environmental,economic, and social dimensions of the life cycle. The results of LCSA can be used to compare different products...... of sustainability is the communicability of the results by means of a graphical representation (a cartogram), characterized by a suitable chromatic scale and ranking score. The integration of LCSA and the dashboard of sustainability into a so-called Life Cycle Sustainability Dashboard (LCSD) is described here...

Female reproductive cycles of wild female felids.

Science.gov (United States)

Brown, Janine L

2011-04-01

Many felid species are endangered because of destructive human activities. As a result, zoos are being tasked with sustaining genetically healthy populations in case of catastrophic extinctions. Unfortunately, with the exception of a few species, most felids do not reproduce well in captivity. The ability to track reproductive activity via hormones is key to developing successful ex situ breeding programs. Through the development of noninvasive fecal hormone monitoring techniques, a high degree of variability in estrous cycle characteristics has been found to exist across the taxon, including the type of ovulation. For example, although all felids have induced ovulations, the occurrence of spontaneous ovulations varies across species, and even between individuals within a species. Clouded leopards, fishing cats and margays frequently have spontaneous ovulations, whereas these are rarely observed in the cheetah, tigrina and ocelot. There are marked species differences in the impact of season on reproductive function, with some being exquisitely sensitive to photoperiod (e.g., Pallas' cat), some moderately affected (tiger, clouded leopard, snow leopard), and others that are not influenced at all (e.g., ocelot, tigrina, margay, lion, leopard, fishing cat). One of the greatest challenges remaining is overcoming the problems associated with highly variable ovarian responses to ovulation induction therapies used with assisted reproductive procedures, like artificial insemination (AI). Success is relatively high in the cheetah and ocelot, but few pregnancies have resulted after AI in clouded leopard, fishing cat and tiger. Current knowledge of the reproductive physiology of nondomestic felids, including aspects of the anatomy, behavior and ovarian cycles will be presented, and how the rapidly growing endocrine database is aiding ex situ management efforts. Published by Elsevier B.V.

The VIP/VPACR system in the reproductive cycle of male lizard Podarcis sicula.

Science.gov (United States)

Agnese, Marisa; Rosati, Luigi; Prisco, Marina; Coraggio, Francesca; Valiante, Salvatore; Scudiero, Rosaria; Laforgia, Vincenza; Andreuccetti, Piero

2014-09-01

Starting from the knowledge that in the reproductive period the Vasoactive Intestinal Peptide (VIP) is widely distributed in Podarcis sicula testis, we studied VIP expression and the localization of the neuropeptide and its receptors in the testis of the Italian wall lizard P. sicula in the other phases of its reproductive cycle (summer stasis, autumnal resumption, winter stasis, spring resumption). By Real Time-PCR, we demonstrated that testicular VIP mRNA levels change during the reproductive cycle, showing a cyclic trend with two peaks, one in the mid-autumnal resumption and the other in the reproductive period. By in situ hybridization and immunohistochemistry, we demonstrated that both VIP mRNA and protein were widely distributed in the testis in almost all the phases of the cycle, except in the early autumnal resumption. As regards the receptors, the VPAC1R was localized mainly in Leydig cells, while the VPAC2R showed the same distribution of VIP. Our results demonstrate that, differently from mammals, where VIP is present only in nerve fibres innerving the testis, an endotesticular synthesis takes place in the lizard and the VIP synthesis changes throughout the reproductive cycle. Moreover, the VIP/VPAC receptor system distribution observed in germ and somatic cells in various phases of the cycle, and particularly in the autumnal resumption and the reproductive period, strongly suggests its involvement in both spermatogenesis and steroidogenesis. Finally, the wider distribution of VIP in lizards with respect to mammals leads us to hypothesize that during the evolution the synthesis sites have been transferred from the testis to other districts, such as the brain. Copyright © 2014 Elsevier Inc. All rights reserved.

Life Cycle Impact Assessment

DEFF Research Database (Denmark)

Rosenbaum, Ralph K.; Hauschild, Michael Zwicky; Boulay, Anne-Marie

2018-01-01

This chapter is dedicated to the third phase of an LCA study, the Life Cycle Impact Assessment (LCIA) where the life cycle inventory’s information on elementary flows is translated into environmental impact scores. In contrast to the three other LCA phases, LCIA is in practice largely automated...

Life-cycle assessment of semiconductors

CERN Document Server

Boyd, Sarah B

2012-01-01

Life-Cycle Assessment of Semiconductors presents the first and thus far only available transparent and complete life cycle assessment of semiconductor devices. A lack of reliable semiconductor LCA data has been a major challenge to evaluation of the potential environmental benefits of information technologies (IT). The analysis and results presented in this book will allow a higher degree of confidence and certainty in decisions concerning the use of IT in efforts to reduce climate change and other environmental effects. Coverage includes but is not limited to semiconductor manufacturing trends by product type and geography, unique coverage of life-cycle assessment, with a focus on uncertainty and sensitivity analysis of energy and global warming missions for CMOS logic devices, life cycle assessment of flash memory and life cycle assessment of DRAM. The information and conclusions discussed here will be highly relevant and useful to individuals and institutions. The book also: Provides a detailed, complete a...

Life cycle management (LCM)

DEFF Research Database (Denmark)

Remmen, Arne; Thrane, Mikkel

2004-01-01

The chapter gives an introduction to Life Cycle Management (LCM) and shows how LCM can be practiced in different contexts and at different ambition levels.......The chapter gives an introduction to Life Cycle Management (LCM) and shows how LCM can be practiced in different contexts and at different ambition levels....

The Annual Reproductive Cycle of Silurus microdorsalis, a Korean Endemic Species

Science.gov (United States)

Ki, Se-Un; Lee, Won-Kyo

2018-01-01

ABSTRACT The annual reproductive cycle of the Korean endemic slender catfish, Silurus microdorsalis, was examined histologically regarding water temperature and day length of habitat, gonadosomatic index (GSI), and development characteristics of female and male gonads. The maximum GSI value was found in May, 1.23±0.33 and 11.77±3.23 for male and female respectively (habitat water temperature 21.5°C/13.59hr day length). On the other hand, the minimal level was 0.63±0.10 in July (26.5°C/14.17) for male and 1.36±0.08 in October (20°C/11.2hr) for female. We compared and calculated the stages of testis and ovary development process in order to determine the germ cell development characteristics and the reproductive cycle. According to results, we classified the annual reproductive cycle of the slender catfish into five stages: Growing phase (December-February), Mature phase (March-April), Ripe and spawning phase / Releasing phase in male (May-June), Degenerative phase (July-August), and Resting phase (September-November).

Does It Have a Life Cycle?

Science.gov (United States)

Keeley, Page

2010-01-01

If life continues from generation to generation, then all plants and animals must go through a life cycle, even though it may be different from organism to organism. Is this what students have "learned," or do they have their own private conceptions about life cycles? The formative assessment probe "Does It Have a Life Cycle?" reveals some…

Human evolution, life history theory, and the end of biological reproduction.

Science.gov (United States)

Last, Cadell

2014-01-01

Throughout primate history there have been three major life history transitions towards increasingly delayed sexual maturation and biological reproduction, as well as towards extended life expectancy. Monkeys reproduce later and live longer than do prosimians, apes reproduce later and live longer than do monkeys, and humans reproduce later and live longer than do apes. These life history transitions are connected to increased encephalization. During the last life history transition from apes to humans, increased encephalization co-evolved with increased dependence on cultural knowledge for energy acquisition. This led to a dramatic pressure for more energy investment in growth over current biological reproduction. Since the industrial revolution socioeconomic development has led to even more energy being devoted to growth over current biological reproduction. I propose that this is the beginning of an ongoing fourth major primate life history transition towards completely delayed biological reproduction and an extension of the evolved human life expectancy. I argue that the only fundamental difference between this primate life history transition and previous life history transitions is that this transition is being driven solely by cultural evolution, which may suggest some deeper evolutionary transition away from biological evolution is already in the process of occurring.

Life cycle biological efficiency of mice divergently selected for heat loss.

Science.gov (United States)

Bhatnagar, A S; Nielsen, M K

2014-08-01

Divergent selection in mice for heat loss was conducted in 3 independent replicates creating a high maintenance, high heat loss (MH) and low maintenance, low heat loss (ML) line and unselected control (MC). Improvement in feed efficiency was observed in ML mice due to a reduced maintenance energy requirement but there was also a slight decline in reproductive performance, survivability, and lean content, particularly when compared to MC animals. The objective of this study was to model a life cycle scenario similar to a livestock production system and calculate total inputs and outputs to estimate overall biological efficiency of these lines and determine if reduced feed intake resulted in improved life cycle efficiency. Feed intake, reproductive performance, growth, and body composition were recorded on 21 mating pairs from each line × replicate combination, cohabitated at 7 wk of age and maintained for up to 1 yr unless culled. Proportion of animals at each parity was calculated from survival rates estimated from previous research when enforcing a maximum of 4, 8, or 12 allowed parities. This parity distribution was then combined with values from previous studies to calculate inputs and outputs of mating pairs and offspring produced in a single cycle at equilibrium. Offspring output was defined as kilograms of lean output of offspring at 49 d. Offspring input was defined as megacalories of energy intake for growing offspring from 21 to 49 d. Parent output was defined as kilograms of lean output of culled parents. Parent input was defined as megacalories of energy intake for mating pairs from weaning of one parity to weaning of the next. Offspring output was greatest in MC mice due to superior BW and numbers weaned, while output was lowest in ML mice due to smaller litter sizes and lean content. Parent output did not differ substantially between lines but was greatest in MH mice due to poorer survival rates resulting in more culled animals. Input was greatest in

Interactions between Genetic and Ecological Effects on the Evolution of Life Cycles.

Science.gov (United States)

Rescan, Marie; Lenormand, Thomas; Roze, Denis

2016-01-01

Sexual reproduction leads to an alternation between haploid and diploid phases, whose relative length varies widely across taxa. Previous genetical models showed that diploid or haploid life cycles may be favored, depending on dominance interactions and on effective recombination rates. By contrast, niche differentiation between haploids and diploids may favor biphasic life cycles, in which development occurs in both phases. In this article, we explore the interplay between genetical and ecological factors, assuming that deleterious mutations affect the competitivity of individuals within their ecological niche and allowing different effects of mutations in haploids and diploids (including antagonistic selection). We show that selection on a modifier gene affecting the relative length of both phases can be decomposed into a direct selection term favoring the phase with the highest mean fitness (due to either ecological differences or differential effects of mutations) and an indirect selection term favoring the phase in which selection is more efficient. When deleterious alleles occur at many loci and in the presence of ecological differentiation between haploids and diploids, evolutionary branching often occurs and leads to the stable coexistence of alleles coding for haploid and diploid cycles, while temporal variations in niche sizes may stabilize biphasic cycles.

Sexual reproduction and genetic exchange in parasitic protists.

Science.gov (United States)

Weedall, Gareth D; Hall, Neil

2015-02-01

A key part of the life cycle of an organism is reproduction. For a number of important protist parasites that cause human and animal disease, their sexuality has been a topic of debate for many years. Traditionally, protists were considered to be primitive relatives of the 'higher' eukaryotes, which may have diverged prior to the evolution of sex and to reproduce by binary fission. More recent views of eukaryotic evolution suggest that sex, and meiosis, evolved early, possibly in the common ancestor of all eukaryotes. However, detecting sex in these parasites is not straightforward. Recent advances, particularly in genome sequencing technology, have allowed new insights into parasite reproduction. Here, we review the evidence on reproduction in parasitic protists. We discuss protist reproduction in the light of parasitic life cycles and routes of transmission among hosts.

Irregular Reproductive Cycles in the Tongaland Loggerhead Sea ...

African Journals Online (AJOL)

The concept of sea-turtles exhibiting regular reproductive cycles is widely accepted. In Tongaland, Natal, after 12 years of research 2 122 female loggerhead turtles have been tagged and the recovery rate of tagged animals back on the nesting beaches has reached SO %. From a sample ofthcsc recoveries it is clear that ...

10 CFR 436.19 - Life cycle costs.

Science.gov (United States)

2010-01-01

... operation and maintenance costs: (c) Replacement costs less salvage costs of replaced building systems; and... 10 Energy 3 2010-01-01 2010-01-01 false Life cycle costs. 436.19 Section 436.19 Energy DEPARTMENT... Procedures for Life Cycle Cost Analyses § 436.19 Life cycle costs. Life cycle costs are the sum of the...

Life cycle and spring phenology of Temora longicornis in the Baltic Sea

DEFF Research Database (Denmark)

Dutz, Jörg; Mohrholz, V.; van Beusekom, J. E. E.

2010-01-01

The seasonal variation in abundance, biomass and vertical distribution of nauplii and copepodites of Temora longicornis in the Bornholm Basin was studied from March 2002 to May 2003 to understand the overwintering, spring development and life cycle of this species in the Baltic Sea. The analysis...... of the life cycle by means of stage structure, copepodite length and stage duration revealed that T. longicornis produced 5 to 6 generations yr–1. The species overwintered in low abundance as an active, slowly developing generation with adults appearing from February/March onwards. The onset of the spring...... bloom in April triggered reproduction and initiated the first spring generation (G1) with a strong rise in nauplii abundance. The stock biomass increased in May with the occurrence of the copepodites of G1 and remained high during the succeeding generations G2 and G3 until August. The stock...

Introducing Life Cycle Impact Assessment

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky; Huijbregts, Mark AJ

2015-01-01

This chapter serves as an introduction to the presentation of the many aspects of life cycle impact assessment (LCIA) in this volume of the book series ‘LCA Compendium’. It starts with a brief historical overview of the development of life cycle impact assessment driven by numerous national LCIA...... methodology projects and presents the international scientific discussions and methodological consensus attempts in consecutive working groups under the auspices of the Society of Environmental Toxicology and Chemistry (SETAC) as well as the UNEP/ SETAC Life Cycle Initiative, and the (almost) parallel...

Effects of test design and temperature in a partial life-cycle study with the freshwater gastropod Potamopyrgus antipodarum.

Science.gov (United States)

Macken, Ailbhe; Le Page, Gareth; Hayfield, Amanda; Williams, Timothy D; Brown, Rebecca J

2012-09-01

Potamopyrgus antipodarum is a candidate for a standardized mollusk partial life-cycle study. This is a comparative study of two test designs (microplate and beaker), with additional endpoints to the proposed guideline methods, for example, tracking of continuous reproductive output over 28 d and attributing it to individual female snails. In addition, an investigation of the effects of temperature (16, 20, and 25°C) on reproduction was also conducted employing the microplate design. Copyright © 2012 SETAC.

Emissions from photovoltaic life cycles

NARCIS (Netherlands)

Fthenakis, V.M.; Kim, H.C.; Alsema, E.A.|info:eu-repo/dai/nl/073416258

2008-01-01

Photovoltaic (PV) technologies have shown remarkable progress recently in terms of annual production capacity and life cycle environmental performances, which necessitate timely updates of environmental indicators. Based on PV production data of 2004–2006, this study presents the life-cycle

Reproductive cycles of Mugil cephalus, Liza ramada and Liza aurata (Teleostei: Mugilidae).

Science.gov (United States)

Bartulović, V; Dulčić, J; Matić-Skoko, S; Glamuzina, B

2011-06-01

The reproductive cycles of three mullet species from the Eastern Adriatic coast were described using several biological parameters (gonado-somatic index, oocyte diameter and sex ratio) to improve knowledge about their reproduction. © 2011 The Authors. Journal of Fish Biology © 2011 The Fisheries Society of the British Isles.

The reproductive cycle of the intertidal gastropod Turbo coronatus ...

African Journals Online (AJOL)

Histological methods were used to determine the reproductive cycle of Turbo coronatus. Ovarian development was assessed from the relative proportions of mature and immature oocytes in sectioned material. Testicular tissues ware subjectively given a maturity index based on the relative proportions of the various ...

Reproductive life of Bhoksa women.

Science.gov (United States)

Garg, S K; Tyagi, D; Sankhyan, A R

1981-01-01

The paper discusses the reproductive life of 111 ever-married Bhoksa women. The mean age at marriage for women of all ages among Bhoksas, like other tribal populations, is high, unlike the caste populations. The mean ages at first birth of the pooled sample and of the completed fertility cases suggest late and early marriages of the older and younger generations. The maximum number of marriages occur between 15 and 19 years and of first births between 16 and 20 years. Percentage of reproductive wastage is high in both the lower and higher age groups. Young mothers with low birth orders and older mothers with high birth orders display a high frequency of reproductive wastage. Evidently, both birth order and the age of the mother have effects on reproductive wastage. Average number of children ever born (including stillbirth but not abortion or miscarriage) per mother of all ages is the highest among Bhoksas of all the studied ethnic groups of India. The Bhoksa, like caste populations, show a high number of children ever born per mother of completed fertility. Quite a high masculinity in the secondary sex ratio, like other mongoloid population is noticed. The contribution of mortality component to the Total Index of Opportunity for Selection is more than that of the fertility component. Bhoksas conform to the general low range of net reproductive index, which is however greater than unity, suggesting that they are in a growth stage.

Life Cycle Assessment for Biofuels

Science.gov (United States)

A presentation based on life cycle assessment (LCA) for biofuels is given. The presentation focuses on energy and biofuels, interesting environmental aspects of biofuels, and how to do a life cycle assessment with some examples related to biofuel systems. The stages of a (biofuel...

Towards Life Cycle Sustainability Assessment

Directory of Open Access Journals (Sweden)

Marzia Traverso

2010-10-01

Full Text Available Sustainability is nowadays accepted by all stakeholders as a guiding principle for both public policy making and corporate strategies. However, the biggest challenge for most organizations remains in the real and substantial implementation of the sustainability concept. The core of the implementation challenge is the question, how sustainability performance can be measured, especially for products and processes. This paper explores the current status of Life Cycle Sustainability Assessment (LCSA for products and processes. For the environmental dimension well established tools like Life Cycle Assessment are available. For the economic and social dimension, there is still need for consistent and robust indicators and methods. In addition to measuring the individual sustainability dimensions, another challenge is a comprehensive, yet understandable presentation of the results. The “Life Cycle Sustainability Dashboard” and the “Life Cycle Sustainability Triangle” are presented as examples for communication tools for both experts and non expert stakeholders.

Microgravity effects on different stages of higher plant life cycle and completion of the seed-to-seed cycle.

Science.gov (United States)

De Micco, V; De Pascale, S; Paradiso, R; Aronne, G

2014-01-01

Human inhabitation of Space requires the efficient realisation of crop cultivation in bioregenerative life-support systems (BLSS). It is well known that plants can grow under Space conditions; however, perturbations of many biological phenomena have been highlighted due to the effect of altered gravity and its possible interactions with other factors. The mechanisms priming plant responses to Space factors, as well as the consequences of such alterations on crop productivity, have not been completely elucidated. These perturbations can occur at different stages of plant life and are potentially responsible for failure of the completion of the seed-to-seed cycle. After brief consideration of the main constraints found in the most recent experiments aiming to produce seeds in Space, we focus on two developmental phases in which the plant life cycle can be interrupted more easily than in others also on Earth. The first regards seedling development and establishment; we discuss reasons for slow development at the seedling stage that often occurs under microgravity conditions and can reduce successful establishment. The second stage comprises gametogenesis and pollination; we focus on male gamete formation, also identifying potential constraints to subsequent fertilisation. We finally highlight how similar alterations at cytological level can not only be common to different processes occurring at different life stages, but can be primed by different stress factors; such alterations can be interpreted within the model of 'stress-induced morphogenic response' (SIMR). We conclude by suggesting that a systematic analysis of all growth and reproductive phases during the plant life cycle is needed to optimise resource use in plant-based BLSS. © 2013 German Botanical Society and The Royal Botanical Society of the Netherlands.

Seasonal life history trade-offs in two leafwing butterflies: Delaying reproductive development increases life expectancy.

Science.gov (United States)

McElderry, Robert M

2016-04-01

Surviving inhospitable periods or seasons may greatly affect fitness. Evidence of this exists in the prevalence of dormant stages in the life cycles of most insects. Here I focused on butterflies with distinct seasonal morphological types (not a genetic polymorphism) in which one morphological type, or form, delays reproduction until favorable conditions return, while the other form develops in an environment that favors direct reproduction. For two butterflies, Anaea aidea and A. andria, I tested the hypothesis that the development of each seasonal form involves a differential allocation of resources to survival at eclosion. I assayed differences in adult longevity among summer and winter forms in either a warm, active environment or a cool, calm environment. Winter form adults lived 40 times longer than summer form but only in calm, cool conditions. The magnitude of this difference provided compelling evidence that the winter form body plan and metabolic strategy (i.e. resource conservatism) favor long term survival. This research suggests that winter form adults maintain lowered metabolic rate, a common feature of diapause, to conserve resources and delay senescence while overwintering. Copyright © 2016 Elsevier Ltd. All rights reserved.

Herbivore-mediated ecological costs of reproduction shape the life history of an iteroparous plant.

Science.gov (United States)

Miller, Tom E X; Tenhumberg, Brigitte; Louda, Svata M

2008-02-01

Plant reproduction yields immediate fitness benefits but can be costly in terms of survival, growth, and future fecundity. Life-history theory posits that reproductive strategies are shaped by trade-offs between current and future fitness that result from these direct costs of reproduction. Plant reproduction may also incur indirect ecological costs if it increases susceptibility to herbivores. Yet ecological costs of reproduction have received little empirical attention and remain poorly integrated into life-history theory. Here, we provide evidence for herbivore-mediated ecological costs of reproduction, and we develop theory to examine how these costs influence plant life-history strategies. Field experiments with an iteroparous cactus (Opuntia imbricata) indicated that greater reproductive effort (proportion of meristems allocated to reproduction) led to greater attack by a cactus-feeding insect (Narnia pallidicornis) and that damage by this herbivore reduced reproductive success. A dynamic programming model predicted strongly divergent optimal reproductive strategies when ecological costs were included, compared with when these costs were ignored. Meristem allocation by cacti in the field matched the optimal strategy expected under ecological costs of reproduction. The results indicate that plant reproductive allocation can strongly influence the intensity of interactions with herbivores and that associated ecological costs can play an important selective role in the evolution of plant life histories.

Life cycle assessment : Past, present, and future

NARCIS (Netherlands)

Guinée, Jeroen B.; Heijungs, Reinout; Huppes, Gjalt; Zamagni, Alessandra; Masoni, Paolo; Buonamici, Roberto; Ekvall, Tomas; Rydberg, Tomas

2011-01-01

Environmental life cycle assessment (LCA) has developed fast over the last three decades. Whereas LCA developed from merely energy analysis to a comprehensive environmental burden analysis in the 1970s, full-fledged life cycle impact assessment and life cycle costing models were introduced in the

Variations upon a theme: Australian lizards provide insights into the endocrine control of vertebrate reproductive cycles.

Science.gov (United States)

Jones, Susan M

2017-04-01

Australian lizards exhibit a broad array of different reproductive strategies and provide an extraordinary diversity and range of models with which to address fundamental problems in reproductive biology. Studies on lizards have frequently led to new insights into hormonal regulatory pathways or mechanisms of control, but we have detailed knowledge of the reproductive cycle in only a small percentage of known species. This review provides an overview and synthesis of current knowledge of the hormonal control of reproductive cycles in Australian lizards. Agamid lizards have provided useful models with which to test hypotheses about the hormonal regulation of the expression of reproductive behaviors, while research on viviparous skinks is providing insights into the evolution of the endocrine control of gestation. However, in order to better understand the potential risks that environmental factors such as climate change and endocrine disrupting chemicals pose to our fauna, better knowledge is required of the fundamental characteristics of the reproductive cycle in a broader range of lizard species. Copyright © 2015 Elsevier Inc. All rights reserved.

Developing Asset Life Cycle Management capabilities through the implementation of Asset Life Cycle Plans – an Action Research project

OpenAIRE

Ruitenburg, Richard; Braaksma, Anne Johannes Jan

2017-01-01

Asset Life Cycle Management is a strategic approach to managing physical assets over their complete life cycle. However, the literature and the recent ISO 55,000 standard do not offer guidance as to how to develop such an approach. This paper investigates the main capabilities for Asset Life Cycle Management by means of a four year Action Research project implementing Asset Life Cycle Plans. Five main capabilities emerged: 1. strategic information use; 2. alignment of operations and strategy;...

Life cycle and population growth rate of Caenorhabditis elegans studied by a new method.

Science.gov (United States)

Muschiol, Daniel; Schroeder, Fabian; Traunspurger, Walter

2009-05-16

The free-living nematode Caenorhabditis elegans is the predominant model organism in biological research, being used by a huge number of laboratories worldwide. Many researchers have evaluated life-history traits of C. elegans in investigations covering quite different aspects such as ecotoxicology, inbreeding depression and heterosis, dietary restriction/supplement, mutations, and ageing. Such traits include juvenile growth rates, age at sexual maturity, adult body size, age-specific fecundity/mortality, total reproduction, mean and maximum lifespan, and intrinsic population growth rates. However, we found that in life-cycle experiments care is needed regarding protocol design. Here, we test a recently developed method that overcomes some problems associated with traditional cultivation techniques. In this fast and yet precise approach, single individuals are maintained within hanging drops of semi-fluid culture medium, allowing the simultaneous investigation of various life-history traits at any desired degree of accuracy. Here, the life cycles of wild-type C. elegans strains N2 (Bristol, UK) and MY6 (Münster, Germany) were compared at 20 degrees C with 5 x 10(9) Escherichia coli ml-1 as food source. High-resolution life tables and fecundity schedules of the two strains are presented. Though isolated 700 km and 60 years apart from each other, the two strains barely differed in life-cycle parameters. For strain N2 (n = 69), the intrinsic rate of natural increase (r m d(-1)), calculated according to the Lotka equation, was 1.375, the net reproductive rate (R 0) 291, the mean generation time (T) 90 h, and the minimum generation time (T min) 73.0 h. The corresponding values for strain MY6 (n = 72) were r m = 1.460, R0 = 289, T = 84 h, and T min = 67.3 h. Peak egg-laying rates in both strains exceeded 140 eggs d(-1). Juvenile and early adulthood mortality was negligible. Strain N2 lived, on average, for 16.7 d, while strain MY6 died 2 days earlier; however

Life cycle and population growth rate of Caenorhabditis elegans studied by a new method

Directory of Open Access Journals (Sweden)

Schroeder Fabian

2009-05-01

Full Text Available Abstract Background The free-living nematode Caenorhabditis elegans is the predominant model organism in biological research, being used by a huge number of laboratories worldwide. Many researchers have evaluated life-history traits of C. elegans in investigations covering quite different aspects such as ecotoxicology, inbreeding depression and heterosis, dietary restriction/supplement, mutations, and ageing. Such traits include juvenile growth rates, age at sexual maturity, adult body size, age-specific fecundity/mortality, total reproduction, mean and maximum lifespan, and intrinsic population growth rates. However, we found that in life-cycle experiments care is needed regarding protocol design. Here, we test a recently developed method that overcomes some problems associated with traditional cultivation techniques. In this fast and yet precise approach, single individuals are maintained within hanging drops of semi-fluid culture medium, allowing the simultaneous investigation of various life-history traits at any desired degree of accuracy. Here, the life cycles of wild-type C. elegans strains N2 (Bristol, UK and MY6 (Münster, Germany were compared at 20°C with 5 × 109 Escherichia coli ml-1 as food source. Results High-resolution life tables and fecundity schedules of the two strains are presented. Though isolated 700 km and 60 years apart from each other, the two strains barely differed in life-cycle parameters. For strain N2 (n = 69, the intrinsic rate of natural increase (rmd-1, calculated according to the Lotka equation, was 1.375, the net reproductive rate (R0 291, the mean generation time (T 90 h, and the minimum generation time (Tmin 73.0 h. The corresponding values for strain MY6 (n = 72 were rm = 1.460, R0 = 289, T = 84 h, and Tmin = 67.3 h. Peak egg-laying rates in both strains exceeded 140 eggs d-1. Juvenile and early adulthood mortality was negligible. Strain N2 lived, on average, for 16.7 d, while strain MY6 died 2 days

Life cycle sustainability assessment of chemical processes

DEFF Research Database (Denmark)

Xu, Di; Lv, Liping; Ren, Jingzheng

2017-01-01

In this study, an integrated vector-based three-dimensional (3D) methodology for the life cycle sustainability assessment (LCSA) of chemical process alternatives is proposed. In the methodology, a 3D criteria assessment system is first established by using the life cycle assessment, the life cycl...

A case study by life cycle assessment

Science.gov (United States)

Li, Shuyun

2017-05-01

This article aims to assess the potential environmental impact of an electrical grinder during its life cycle. The Life Cycle Inventory Analysis was conducted based on the Simplified Life Cycle Assessment (SLCA) Drivers that calculated from the Valuation of Social Cost and Simplified Life Cycle Assessment Model (VSSM). The detailed results for LCI can be found under Appendix II. The Life Cycle Impact Assessment was performed based on Eco-indicator 99 method. The analysis results indicated that the major contributor to the environmental impact as it accounts for over 60% overall SLCA output. In which, 60% of the emission resulted from the logistic required for the maintenance activities. This was measured by conducting the hotspot analysis. After performing sensitivity analysis, it is evidenced that changing fuel type results in significant decrease environmental footprint. The environmental benefit can also be seen from the negative output values of the recycling activities. By conducting Life Cycle Assessment analysis, the potential environmental impact of the electrical grinder was investigated.

Effects of complex life cycles on genetic diversity: cyclical parthenogenesis.

Science.gov (United States)

Rouger, R; Reichel, K; Malrieu, F; Masson, J P; Stoeckel, S

2016-11-01

Neutral patterns of population genetic diversity in species with complex life cycles are difficult to anticipate. Cyclical parthenogenesis (CP), in which organisms undergo several rounds of clonal reproduction followed by a sexual event, is one such life cycle. Many species, including crop pests (aphids), human parasites (trematodes) or models used in evolutionary science (Daphnia), are cyclical parthenogens. It is therefore crucial to understand the impact of such a life cycle on neutral genetic diversity. In this paper, we describe distributions of genetic diversity under conditions of CP with various clonal phase lengths. Using a Markov chain model of CP for a single locus and individual-based simulations for two loci, our analysis first demonstrates that strong departures from full sexuality are observed after only a few generations of clonality. The convergence towards predictions made under conditions of full clonality during the clonal phase depends on the balance between mutations and genetic drift. Second, the sexual event of CP usually resets the genetic diversity at a single locus towards predictions made under full sexuality. However, this single recombination event is insufficient to reshuffle gametic phases towards full-sexuality predictions. Finally, for similar levels of clonality, CP and acyclic partial clonality (wherein a fixed proportion of individuals are clonally produced within each generation) differentially affect the distribution of genetic diversity. Overall, this work provides solid predictions of neutral genetic diversity that may serve as a null model in detecting the action of common evolutionary or demographic processes in cyclical parthenogens (for example, selection or bottlenecks).

Reproductive status of opisthoteuthis sp . Over an annual cycle ...

African Journals Online (AJOL)

The reproductive biology of deepwater cephalopods has received relatively little attention. The cirrate octopus Opisthoteuthis sp. is a regular bycatch in deep benthic trawls from 800 to 1 200 m deep west of Scotland. Specimens were sampled throughout the seasonal cycle. Mature females occurred over a broad size range ...

THE DISCOUNTED REPRODUCTIVE NUMBER FOR EPIDEMIOLOGY

OpenAIRE

Reluga, Timothy C.; Medlock, Jan; Galvani, Alison

2009-01-01

The basic reproductive number, , and the effective reproductive number, , are commonly used in mathematical epidemiology as summary statistics for the size and controllability of epidemics. However, these commonly used reproductive numbers can be misleading when applied to predict pathogen evolution because they do not incorporate the impact of the timing of events in the life-history cycle of the pathogen. To study evolution problems where the host population size is changing, measur...

Reproductive Cycle of Hard Clam, Meretrix lyrata Sowerby, 1851 (Bivalvia: Veneridae) from Sarawak, Malaysia.

Science.gov (United States)

Hamli, Hadi; Idris, Mohd Hanafi; Rajaee, Amy Halimah; Kamal, Abu Hena Mustafa

2015-12-01

A study of the reproductive cycle of the hard clam, Meretrix lyrata, was documented based on histological observation and Gonad Index (GI). Samples were taken from estuarine waters of the Buntal River in Sarawak, Malaysia. The gonad of M. lyrata started to develop in September 2013. Gametogenesis continued to develop until the maturation and spawning stage from February to April 2014. The GI pattern for a one-year cycle showed a significant correlation with chlorophyll a. The corresponding GI with chlorophyll a suggested that the development of the reproductive cycle of M. lyrata required a high amount of food to increase gametogenesis.

Sustainable Building Life Cycle Design

Directory of Open Access Journals (Sweden)

Ginzburg Alexander

2016-01-01

Full Text Available The current building life cycle management system in the Russian Federation is a family of discrete subsystems that exist independently for different building life cycle stages. In this situation building reliability and sustainable functioning are out of the question. The implementation of a united information model (BIM-model intended to describe building entire life cycle will allow to raise the sustainability, but this will happen only if goals and concerns of all participants of the project process are properly coordinated. An important figure of process sustainability is the organizational and technological reliability (OTR that describes the possibility of a system to reach a goal. In case of building life cycle design, the economical efficiency of a building can be considered as the goal. The required technical, ecological, organizational, and other parameters form a complex of constraints that determine the area of allowable values for building functioning. In its broad meaning, OTR may be understood as the probability of receiving an economical effect based on the value of organizational and economical reliability (OER.

Life cycle management of analytical methods.

Science.gov (United States)

Parr, Maria Kristina; Schmidt, Alexander H

2018-01-05

In modern process management, the life cycle concept gains more and more importance. It focusses on the total costs of the process from invest to operation and finally retirement. Also for analytical procedures an increasing interest for this concept exists in the recent years. The life cycle of an analytical method consists of design, development, validation (including instrumental qualification, continuous method performance verification and method transfer) and finally retirement of the method. It appears, that also regulatory bodies have increased their awareness on life cycle management for analytical methods. Thus, the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH), as well as the United States Pharmacopeial Forum discuss the enrollment of new guidelines that include life cycle management of analytical methods. The US Pharmacopeia (USP) Validation and Verification expert panel already proposed a new General Chapter 〈1220〉 "The Analytical Procedure Lifecycle" for integration into USP. Furthermore, also in the non-regulated environment a growing interest on life cycle management is seen. Quality-by-design based method development results in increased method robustness. Thereby a decreased effort is needed for method performance verification, and post-approval changes as well as minimized risk of method related out-of-specification results. This strongly contributes to reduced costs of the method during its life cycle. Copyright © 2017 Elsevier B.V. All rights reserved.

Developing Asset Life Cycle Management capabilities through the implementation of Asset Life Cycle Plans – an Action Research project

NARCIS (Netherlands)

Ruitenburg, Richard; Braaksma, Anne Johannes Jan

2017-01-01

Asset Life Cycle Management is a strategic approach to managing physical assets over their complete life cycle. However, the literature and the recent ISO 55,000 standard do not offer guidance as to how to develop such an approach. This paper investigates the main capabilities for Asset Life Cycle

Energy-containing beverages: reproductive hormones and ovarian function in the BioCycle Study.

Science.gov (United States)

Schliep, Karen C; Schisterman, Enrique F; Mumford, Sunni L; Pollack, Anna Z; Perkins, Neil J; Ye, Aijun; Zhang, Cuilin J; Stanford, Joseph B; Porucznik, Christina A; Hammoud, Ahmad O; Wactawski-Wende, Jean

2013-03-01

Energy-containing beverages are widely consumed among premenopausal women, but their association with reproductive hormones is not well understood. The objective was to assess the association of energy-containing beverages, added sugars, and total fructose intake with reproductive hormones among ovulatory cycles and sporadic anovulation in healthy premenopausal women. Women (n = 259) in the BioCycle Study were followed for up to 2 menstrual cycles; they provided fasting blood specimens during up to 8 visits/cycle and four 24-h dietary recalls/cycle. Women who consumed ≥1 cup (1 cup = 237 mL) sweetened soda/d had 16.3% higher estradiol concentrations compared with women who consumed less sweetened soda (86.5 pg/mL compared with 74.4 pg/mL, P = 0.01) after adjustment for age, BMI, race, dietary factors, and physical activity. Similarly elevated estradiol concentrations were found for ≥1 cup cola/d and noncola soda intake. Neither artificially sweetened soda nor fruit juice intake ≥1 cup/d was significantly associated with reproductive hormones. Added sugar above the average US woman's intake (≥73.2 g/d) or above the 66th percentile in total fructose intake (≥41.5 g/d) was associated with significantly elevated estradiol but not consistently across all models. No associations were found between beverages, added sugars, or total fructose intake and anovulation after multivariate adjustment. Even at moderate consumption amounts, sweetened soda is associated with elevated follicular estradiol concentrations among premenopausal women but does not appear to affect ovulatory function. Further research into the mechanism driving the association between energy-containing beverages and reproductive hormones, and its potential implications for women's health, is warranted.

Life-cycle energy of residential buildings in China

International Nuclear Information System (INIS)

Chang, Yuan; Ries, Robert J.; Wang, Yaowu

2013-01-01

In the context of rapid urbanization and new construction in rural China, residential building energy consumption has the potential to increase with the expected increase in demand. A process-based hybrid life-cycle assessment model is used to quantify the life-cycle energy use for both urban and rural residential buildings in China and determine the energy use characteristics of each life cycle phase. An input–output model for the pre-use phases is based on 2007 Chinese economic benchmark data. A process-based life-cycle assessment model for estimating the operation and demolition phases uses historical energy-intensity data. Results show that operation energy in both urban and rural residential buildings is dominant and varies from 75% to 86% of life cycle energy respectively. Gaps in living standards as well as differences in building structure and materials result in a life-cycle energy intensity of urban residential buildings that is 20% higher than that of rural residential buildings. The life-cycle energy of urban residential buildings is most sensitive to the reduction of operational energy intensity excluding heating energy which depends on both the occupants' energy-saving behavior as well as the performance of the building itself. -- Highlights: •We developed a hybrid LCA model to quantify the life-cycle energy for urban and rural residential buildings in China. •Operation energy in urban and rural residential buildings is dominant, varying from 75% to 86% of life cycle energy respectively. •Compared with rural residential buildings, the life-cycle energy intensity of urban residential buildings is 20% higher. •The life-cycle energy of urban residential buildings is most sensitive to the reduction of daily activity energy

Obsessive-compulsive disorder and female reproductive cycle events: results from the OCD and reproduction collaborative study

NARCIS (Netherlands)

Guglielmi, Valeria; Vulink, Nienke C. C.; Denys, Damiaan; Wang, Ying; Samuels, Jack F.; Nestadt, Gerald

2014-01-01

Women with obsessive-compulsive disorder (OCD) often report that symptoms first appear or exacerbate during reproductive cycle events; however, little is known about these relationships. The goals of this study were to examine, in a US and a European female OCD sample, onset and exacerbation of OCD

Life Cycle Collection Management

Directory of Open Access Journals (Sweden)

Helen Shenton

2003-09-01

Full Text Available Life cycle collection management is a way of taking a long-term approach to the responsible stewardship of the British Library's collections and is one of the Library's strategic strands. It defines the different stages in a collection item's existence over time. These stages range from selection and acquisitions processing, cataloguing and press marking, through to preventive conservation, storage and retrieval. Life cycle collection management seeks to identify the costs of each stage in order to show the economic interdependencies between the phases over time. It thereby aims to demonstrate the long-term consequences of what the library takes into its collections, by making explicit the financial and other implications of decisions made at the beginning of the life cycle for the next 100 plus years. This paper describes the work over the past year at the British Library on this complex and complicated subject. It presents the emerging findings and suggests how it can be used for practical reasons (by individual curators and selectors and for economic, governance and political purposes. The paper describes the next steps in the project, for example, on a predictive data model. The British Library is seeking to benchmark itself against comparable organisations in this area. It intends to work with others on specific comparison for example, of life cycle costing of electronic and paper journals, as a prelude to eliding digital and 'traditional' formats.

The Sphinx's Riddle: Life and Career Cycles.

Science.gov (United States)

Burack, Elmer H.

1984-01-01

Career cycles should be considered apart from life cycles, even though the two are interrelated. This essay examines five theories about life and career cycles, and offers insights into their limitations and potential uses. (JB)

A comparison of production system life cycle models

Science.gov (United States)

Attri, Rajesh; Grover, Sandeep

2012-09-01

Companies today need to keep up with the rapidly changing market conditions to stay competitive. The main issues in this paper are related to a company's market and its competitors. The prediction of market behavior is helpful for a manufacturing enterprise to build efficient production systems. However, these predictions are usually not reliable. A production system is required to adapt to changing markets, but such requirement entails higher cost. Hence, analyzing different life cycle models of the production system is necessary. In this paper, different life cycle models of the production system are compared to evaluate the distinctive features and the limitations of each model. Furthermore, the difference between product life cycle and production life cycle is summarized, and the effect of product life cycle on production life cycle is explained. Finally, a production system life cycle model, along with key activities to be performed in each stage, is proposed specifically for the manufacturing sector.

Life-cycle testing of receiving waters with Ceriodaphnia dubia

International Nuclear Information System (INIS)

Stewart, A.J.; Beane, B.K.

1995-01-01

Seven-day tests with Ceriodaphnia are commonly used to estimate the toxicity of effluents or receiving waters, but may yield no toxicity outcomes even when pollutants are present (a possible type II error). The authors conducted two sets of full life-cycle tests with C. dubia to (1) see if tests with longer exposure periods revealed evidence for toxicity that might not be evident from shorter tests, and (2) determine the relative importance of water quality versus food as factors influencing C. dubia reproduction. In the first set of tests, daphnids were reared in diluted mineral water (control), water from a stream impacted by coal fly-ash, or water from a mercury-contaminated retention basin. The second set of tests used water from the retention basin only, but this water was either filtered or not filtered, and food was either added or not added. C. dubia survival and reproduction did not differ much among the three waters in the first set of tests. However, both parameters were strongly affected by the filtering and food-addition treatments in the second set of tests. Thus, C. dubia seems to be moderately insensitive to general water-quality factors, but quite sensitive to food-related parameters. Regression analysis showed that the predictability of life-time reproduction of C. dubia from 7-day test results was low in five of six cases. The increase in predictability as a function of test duration also differed among water types (first set of tests), and among treatments (second set of tests). Thus, 7-day tests with C. dubia may be used to quantify water-quality problems, but it may not be possible to reliably extrapolate the results of such tests to longer time scales

Life Cycle Environmental Management

DEFF Research Database (Denmark)

Pedersen, Claus Stig; Jørgensen, Jørgen; Pedersen, Morten Als

1996-01-01

A precondition for environmentally conscious management is the awareness of the environmental impact potentials created by an industrial company. There is an obvious need for management tools to support the implementation of relevant environmental criteria into the industrial decision making...... processes. The discipline of life cycle environmental management (LCEM) focuses on the incorporation of environmental criteria from the life cycles of products and other company activities into the company management processes. This paper introduces the concept of LCEM as an important element...... of the complete set of environmental objects in an industrial manufacturing company....

Life cycle management in product development

DEFF Research Database (Denmark)

Skelton, Kristen; Pattis, Anna

2013-01-01

The integration of Life Cycle Thinking (LCT) and Life Cycle Management (LCM) into business operations poses great challenges, as it requires a wider range of environmental responsibility often extending beyond a company's immediate control. Simultaneously, it offers many opportunities...

Antifreeze life cycle assessment (LCA

Directory of Open Access Journals (Sweden)

Kesić Jelena

2005-01-01

Full Text Available Antifreeze based on ethylene glycol is a commonly used commercial product The classification of ethylene glycol as a toxic material increased the disposal costs for used antifreeze and life cycle assessment became a necessity. Life Cycle Assessment (LCA considers the identification and quantification of raw materials and energy inputs and waste outputs during the whole life cycle of the analyzed product. The objectives of LCA are the evaluation of impacts on the environment and improvements of processes in order to reduce and/or eliminate waste. LCA is conducted through a mathematical model derived from mass and energy balances of all the processes included in the life cycle. In all energy processes the part of energy that can be transformed into some other kind of energy is called exergy. The concept of exergy considers the quality of different types of energy and the quality of different materials. It is also a connection between energy and mass transformations. The whole life cycle can be described by the value of the total loss of exergy. The physical meaning of this value is the loss of material and energy that can be used. The results of LCA are very useful for the analyzed products and processes and for the determined conditions under which the analysis was conducted. The results of this study indicate that recycling is the most satisfactory solution for the treatment of used antifreeze regarding material and energy consumption but the re-use of antifreeze should not be neglected as a solution.

Consilience and Life History Theory: From Genes to Brain to Reproductive Strategy

Science.gov (United States)

Figueredo, Aurelio Jose; Vasquez, Geneva; Brumbach, Barbara H.; Schneider, Stephanie M. R.; Sefcek, Jon A.; Tal, Ilanit R.; Hill, Dawn; Wenner, Christopher J.; Jacobs, W. Jake

2006-01-01

We describe an integrated theory of individual differences that traces the behavioral development of life history from genes to brain to reproductive strategy. We provide evidence that a single common factor, the K-Factor, underpins a variety of life-history parameters, including an assortment of sexual, reproductive, parental, familial, and…

Life Cycle Assessment and Risk Assessment

DEFF Research Database (Denmark)

Olsen, Stig Irving

Life Cycle Assessment (LCA) is a tool for environmental assessment of product and systems – over the whole life cycle from acquisition of raw materials to the end-of-life of the product – and encompassing all environmental impacts of emissions and resource usage, e.g. global warming, acidification...... cycle. The models for assessing toxic impacts in LCA are to a large extent based on those developed for RA, e.g. EUSES, and require basic information about the inherent properties of the emissions like solubility, LogKow,ED50 etc. Additionally, it is a prerequisite to know how to characterize...

How can a life cycle inventory parametric model streamline life cycle assessment in the wooden pallet sector?

DEFF Research Database (Denmark)

Niero, Monia; Di Felice, Francesco; Ren, Jingzheng

2014-01-01

, as the information required for fulfilling the LCI are standard information about the features of the wooden pallet and its manufacturing process. The contribution analysis on the reference product revealed that the most contributing life cycle stages are wood and nails extraction and manufacturing (positive value......This study discusses the use of parameterization within the life cycle inventory (LCI) in the wooden pallet sector, in order to test the effectiveness of LCI parametric models to calculate the environmental impacts of similar products. Starting from a single case study, the objectives of this paper......; these correlations can be used to improve the design of new wooden pallets.The conceptual scheme for defining the model is based on ISO14040-44 standards. First of all, the product system was defined identifying the life cycle of a generic wood pallet, as well as its life cycle stages. A list of independent...

Long-term effects of antibiotics, norfloxacin, and sulfamethoxazole, in a partial life-cycle study with zebrafish (Danio rerio): effects on growth, development, and reproduction.

Science.gov (United States)

Yan, Zhenhua; Lu, Guanghua; Ye, Qiuxia; Liu, Jianchao

2016-09-01

A partial life-cycle study with zebrafish (Danio rerio) was conducted to evaluate the long-term effects of antibiotics, norfloxacin (NOR) and sulfamethoxazole (SMX). A series of bio-endpoints correlated to the growth, development, and reproduction was assessed. The results showed that the body weight and the condition factor were depressed by SMX at 200 μg/L during the growth period. Meanwhile, the activities of metabolic enzyme (ethoxyresorufin O-deethylase, EROD) and antioxidant enzymes (superoxide dismutase, SOD and catalase, CAT) were stimulated in all cases. The consequences of parental exposure to antibiotics for the next generation were also examined. The egg production of parents were depressed by the 200 μg/L NOR and SMX alone or in combination. Similarly, decreased hatching, survival, and enhanced development abnormality of the next generation also occurred after parental exposure to SMX at the highest concentration. The heartbeat however was not altered in all cases. Furthermore, there was no significant difference in the bio-endpoints between the combined and individual treatment in most cases, with the exception of lower EROD activity and egg production in the co-treatment. The results suggest that long-term exposure to NOR and SMX at environmentally relevant concentrations, individually and in a mixture, may not significantly pose a threat to the growth, development, and reproduction of zebrafish, and an adverse effect may be expected at high concentration.

Recent developments in Life Cycle Assessment

NARCIS (Netherlands)

Finnveden, Göran; Hauschild, Michael Z.; Ekvall, Tomas; Guinée, Jeroen B.; Heijungs, Reinout; Hellweg, Stefanie; Koehler, Annette; Pennington, David; Suh, Sangwon

2009-01-01

Life Cycle Assessment is a tool to assess the environmental impacts and resources used throughout a product's life cycle, i.e., from raw material acquisition, via production and use phases, to waste management. The methodological development in LCA has been strong, and LCA is broadly applied in

Educational Focuses in Organisational Life Cycles.

Science.gov (United States)

Miller, Harry G.

1985-01-01

Presents four stages frequently associated with the stages of an organization's life cycle: experimentation, growth, maturity, and decline or stability. The author also demonstrates that the impact of employment and thus training related to organizational life cycles suggests a need for understanding the technical preparation required for…

Environmental analysis of natural gas life cycle

International Nuclear Information System (INIS)

Riva, A.; D'Angelosante, S.; Trebeschi, C.

2000-01-01

Life Cycle Assessment is a method aimed at identifying the environmental effects connected with a given product, process or activity during its whole life cycle. The evaluation of published studies and the application of the method to electricity production with fossil fuels, by using data from published databases and data collected by the gas industry, demonstrate the importance and difficulties to have reliable and updated data required for a significant life cycle assessment. The results show that the environmental advantages of natural gas over the other fossil fuels in the final use stage increase still further if the whole life cycle of the fuels, from production to final consumption, is taken into account [it

Emissions from photovoltaic life cycles.

Science.gov (United States)

Fthenakis, Vasilis M; Kim, Hyung Chul; Alsema, Erik

2008-03-15

Photovoltaic (PV) technologies have shown remarkable progress recently in terms of annual production capacity and life cycle environmental performances, which necessitate timely updates of environmental indicators. Based on PV production data of 2004-2006, this study presents the life-cycle greenhouse gas emissions, criteria pollutant emissions, and heavy metal emissions from four types of major commercial PV systems: multicrystalline silicon, monocrystalline silicon, ribbon silicon, and thin-film cadmium telluride. Life-cycle emissions were determined by employing average electricity mixtures in Europe and the United States during the materials and module production for each PV system. Among the current vintage of PV technologies, thin-film cadmium telluride (CdTe) PV emits the least amount of harmful air emissions as it requires the least amount of energy during the module production. However, the differences in the emissions between different PV technologies are very small in comparison to the emissions from conventional energy technologies that PV could displace. As a part of prospective analysis, the effect of PV breeder was investigated. Overall, all PV technologies generate far less life-cycle air emissions per GWh than conventional fossil-fuel-based electricity generation technologies. At least 89% of air emissions associated with electricity generation could be prevented if electricity from photovoltaics displaces electricity from the grid.

Fast-slow continuum and reproductive strategies structure plant life-history variation worldwide.

Science.gov (United States)

Salguero-Gómez, Roberto; Jones, Owen R; Jongejans, Eelke; Blomberg, Simon P; Hodgson, David J; Mbeau-Ache, Cyril; Zuidema, Pieter A; de Kroon, Hans; Buckley, Yvonne M

2016-01-05

The identification of patterns in life-history strategies across the tree of life is essential to our prediction of population persistence, extinction, and diversification. Plants exhibit a wide range of patterns of longevity, growth, and reproduction, but the general determinants of this enormous variation in life history are poorly understood. We use demographic data from 418 plant species in the wild, from annual herbs to supercentennial trees, to examine how growth form, habitat, and phylogenetic relationships structure plant life histories and to develop a framework to predict population performance. We show that 55% of the variation in plant life-history strategies is adequately characterized using two independent axes: the fast-slow continuum, including fast-growing, short-lived plant species at one end and slow-growing, long-lived species at the other, and a reproductive strategy axis, with highly reproductive, iteroparous species at one extreme and poorly reproductive, semelparous plants with frequent shrinkage at the other. Our findings remain consistent across major habitats and are minimally affected by plant growth form and phylogenetic ancestry, suggesting that the relative independence of the fast-slow and reproduction strategy axes is general in the plant kingdom. Our findings have similarities with how life-history strategies are structured in mammals, birds, and reptiles. The position of plant species populations in the 2D space produced by both axes predicts their rate of recovery from disturbances and population growth rate. This life-history framework may complement trait-based frameworks on leaf and wood economics; together these frameworks may allow prediction of responses of plants to anthropogenic disturbances and changing environments.

Regulation of the demographic structure in isomorphic biphasic life cycles at the spatial fine scale.

Directory of Open Access Journals (Sweden)

Vasco Manuel Nobre de Carvalho da Silva Vieira

Full Text Available Isomorphic biphasic algal life cycles often occur in the environment at ploidy abundance ratios (Haploid:Diploid different from 1. Its spatial variability occurs within populations related to intertidal height and hydrodynamic stress, possibly reflecting the niche partitioning driven by their diverging adaptation to the environment argued necessary for their prevalence (evolutionary stability. Demographic models based in matrix algebra were developed to investigate which vital rates may efficiently generate an H:D variability at a fine spatial resolution. It was also taken into account time variation and type of life strategy. Ploidy dissimilarities in fecundity rates set an H:D spatial structure miss-fitting the ploidy fitness ratio. The same happened with ploidy dissimilarities in ramet growth whenever reproductive output dominated the population demography. Only through ploidy dissimilarities in looping rates (stasis, breakage and clonal growth did the life cycle respond to a spatially heterogeneous environment efficiently creating a niche partition. Marginal locations were more sensitive than central locations. Related results have been obtained experimentally and numerically for widely different life cycles from the plant and animal kingdoms. Spore dispersal smoothed the effects of ploidy dissimilarities in fertility and enhanced the effects of ploidy dissimilarities looping rates. Ploidy dissimilarities in spore dispersal could also create the necessary niche partition, both over the space and time dimensions, even in spatial homogeneous environments and without the need for conditional differentiation of the ramets. Fine scale spatial variability may be the key for the prevalence of isomorphic biphasic life cycles, which has been neglected so far.

Modeling effects of cadmium on population growth of Palaemonetes pugio: Results of a full life cycle exposure

International Nuclear Information System (INIS)

Manyin, Teresa; Rowe, Christopher L.

2008-01-01

In an 8-month laboratory experiment, Palaemonetes pugio (grass shrimp) were exposed to aqueous cadmium (free cadmium ion concentrations of 1.51 or 2.51 μg Cd 2+ /L) for an entire life cycle, from larva to reproductive adult and through to production of second-generation larva. Individual-level effects on survival, life stage duration, and reproduction were measured, and population growth was projected using two models: a stage-based matrix model and a z-transformed life cycle graph analysis. Adult survival was significantly reduced at 2.51 μg Cd 2+ /L, but cadmium exposure had no effects on survival or stage duration of embryos, larvae, or juveniles. Survival of second-generation larvae was unaffected by maternal exposure. Brood size was reduced by 27% at 1.51 μg Cd 2+ /L and by 36% at 2.51 μg Cd 2+ /L. The percent of females in the population that was gravid was approximately 50% lower at 2.51 μg Cd 2+ /L, compared to controls. Both population models projected a dose-dependent decrease in population growth rate (λ), up to a 12% reduction at 2.51 μg Cd 2+ /L, which can be attributed mainly to contributions from reproductive effects. Elasticity analysis revealed that population growth rate was most sensitive to changes in survival of juveniles and adults. However, lethal effects of cadmium made only a small contribution to the effect on population growth rate. Even though both models project positive growth (λ > 1) of grass shrimp populations exposed to low concentrations of cadmium, the ability of populations to withstand predation pressure would be compromised

Modeling effects of cadmium on population growth of Palaemonetes pugio: Results of a full life cycle exposure

Energy Technology Data Exchange (ETDEWEB)

Manyin, Teresa [University of Maryland Center for Environmental Science, Chesapeake Biological Laboratory, PO Box 38, 1 Williams Street, Solomons, MD 20688 (United States)], E-mail: manyin@cbl.umces.edu; Rowe, Christopher L. [University of Maryland Center for Environmental Science, Chesapeake Biological Laboratory, PO Box 38, 1 Williams Street, Solomons, MD 20688 (United States)

2008-06-23

In an 8-month laboratory experiment, Palaemonetes pugio (grass shrimp) were exposed to aqueous cadmium (free cadmium ion concentrations of 1.51 or 2.51 {mu}g Cd{sup 2+}/L) for an entire life cycle, from larva to reproductive adult and through to production of second-generation larva. Individual-level effects on survival, life stage duration, and reproduction were measured, and population growth was projected using two models: a stage-based matrix model and a z-transformed life cycle graph analysis. Adult survival was significantly reduced at 2.51 {mu}g Cd{sup 2+}/L, but cadmium exposure had no effects on survival or stage duration of embryos, larvae, or juveniles. Survival of second-generation larvae was unaffected by maternal exposure. Brood size was reduced by 27% at 1.51 {mu}g Cd{sup 2+}/L and by 36% at 2.51 {mu}g Cd{sup 2+}/L. The percent of females in the population that was gravid was approximately 50% lower at 2.51 {mu}g Cd{sup 2+}/L, compared to controls. Both population models projected a dose-dependent decrease in population growth rate ({lambda}), up to a 12% reduction at 2.51 {mu}g Cd{sup 2+}/L, which can be attributed mainly to contributions from reproductive effects. Elasticity analysis revealed that population growth rate was most sensitive to changes in survival of juveniles and adults. However, lethal effects of cadmium made only a small contribution to the effect on population growth rate. Even though both models project positive growth ({lambda} > 1) of grass shrimp populations exposed to low concentrations of cadmium, the ability of populations to withstand predation pressure would be compromised.

Development of a methodology for successful multigeneration life-cycle testing of the estuarine sheepshead minnow, Cyprinodon variegatus.

Science.gov (United States)

Cripe, G M; Hemmer, B L; Goodman, L R; Vennari, J C

2009-04-01

Evaluation of effects on fish reproduction and development during chemical exposures lasting for multiple generations is sometimes limited by variable reproductive responses and the time required for the exposure. Established testing methods and the short life cycle of the sheepshead minnow, Cyprinodon variegatus, make this species particularly suitable for use in identifying potential impacts of contaminants in estuarine and marine environments. This study describes the refinement of life-cycle exposure methods that increased the reliability of reproduction in sheepshead minnows and reduced the time to maturation for larvae and juvenile fishes. A test of three spawning chamber designs, three sex ratios, and two photoperiods identified conditions that reduced the coefficient of variation in egg production from >100% to as little as 32%. The most reliable results were produced with groups of three female and two male fishes (all of similar size) when they were placed in a rectangular chamber and acclimated for 12 days. A test water temperature of 26.5 +/- 2 degrees C and a 14L:10D photoperiod resulted in fish producing a mean of 74 embryos per female per day, with a coefficient of variation of 31.8%. Egg fertility exceeded 90%, with a hatch rate of 95% for normal embryos (>or=80% yolk) and a hatch rate of size (>or=2.7 cm standard length) was critical for spawning readiness. Adult fish were prepared for the spawning assessment by adding frozen brine shrimp to their diet. Results of these experiments provide methods that are of particular interest in assessment of endocrine-disrupting chemicals that are known to affect reproduction.

Social Life Cycle Assessment: An Introduction

DEFF Research Database (Denmark)

Moltesen, Andreas; Bonou, Alexandra; Wangel, Arne

2018-01-01

An expansion of the LCA framework has been going on through the development of ‘social life cycle assessment’—S-LCA. The methodology, still in its infancy, has the goal of assessing social impacts related to a product’s life cycle. This chapter introduces S-LCA framework area and the related...

Mosquito Life Cycle

Science.gov (United States)

Knowing the stages of the mosquito's life will help you prevent mosquitoes around your home and help you choose the right pesticides for your needs, if you decide to use them. All mosquito species go through four distinct stages during their live cycle.

Defining the baseline in social life cycle assessment

DEFF Research Database (Denmark)

Jørgensen, Andreas; Finkbeiner, Matthias; Jørgensen, Michael Søgaard

2010-01-01

A relatively broad consensus has formed that the purpose of developing and using the social life cycle assessment (SLCA) is to improve the social conditions for the stakeholders affected by the assessed product's life cycle. To create this effect, the SLCA, among other things, needs to provide...... valid assessments of the consequence of the decision that it is to support. The consequence of a decision to implement a life cycle of a product can be seen as the difference between the decision being implemented and 'non-implemented' product life cycle. This difference can to some extent be found...... using the consequential environmental life cycle assessment (ELCA) methodology to identify the processes that change as a consequence of the decision. However, if social impacts are understood as certain changes in the lives of the stakeholders, then social impacts are not only related to product life...

Fuel cell hybrid taxi life cycle analysis

Energy Technology Data Exchange (ETDEWEB)

Baptista, Patricia, E-mail: patricia.baptista@ist.utl.pt [IDMEC-Instituto Superior Tecnico, Universidade Tecnica de Lisboa, Av. Rovisco Pais, 1, 1049-001 Lisboa (Portugal); Ribau, Joao; Bravo, Joao; Silva, Carla [IDMEC-Instituto Superior Tecnico, Universidade Tecnica de Lisboa, Av. Rovisco Pais, 1, 1049-001 Lisboa (Portugal); Adcock, Paul; Kells, Ashley [Intelligent Energy, Charnwood Building, HolywellPark, Ashby Road, Loughborough, LE11 3GR (United Kingdom)

2011-09-15

A small fleet of classic London Taxis (Black cabs) equipped with hydrogen fuel cell power systems is being prepared for demonstration during the 2012 London Olympics. This paper presents a Life Cycle Analysis for these vehicles in terms of energy consumption and CO{sub 2} emissions, focusing on the impacts of alternative vehicle technologies for the Taxi, combining the fuel life cycle (Tank-to-Wheel and Well-to-Tank) and vehicle materials Cradle-to-Grave. An internal combustion engine diesel taxi was used as the reference vehicle for the currently available technology. This is compared to battery and fuel cell vehicle configurations. Accordingly, the following energy pathways are compared: diesel, electricity and hydrogen (derived from natural gas steam reforming). Full Life Cycle Analysis, using the PCO-CENEX drive cycle, (derived from actual London Taxi drive cycles) shows that the fuel cell powered vehicle configurations have lower energy consumption (4.34 MJ/km) and CO{sub 2} emissions (235 g/km) than both the ICE Diesel (9.54 MJ/km and 738 g/km) and the battery electric vehicle (5.81 MJ/km and 269 g/km). - Highlights: > A Life Cycle Analysis of alternative vehicle technologies for the London Taxi was performed. > The hydrogen powered vehicles have the lowest energy consumption and CO{sub 2} emissions results. > A hydrogen powered solution can be a sustainable alternative in a full life cycle framework.

Fuel cell hybrid taxi life cycle analysis

International Nuclear Information System (INIS)

Baptista, Patricia; Ribau, Joao; Bravo, Joao; Silva, Carla; Adcock, Paul; Kells, Ashley

2011-01-01

A small fleet of classic London Taxis (Black cabs) equipped with hydrogen fuel cell power systems is being prepared for demonstration during the 2012 London Olympics. This paper presents a Life Cycle Analysis for these vehicles in terms of energy consumption and CO 2 emissions, focusing on the impacts of alternative vehicle technologies for the Taxi, combining the fuel life cycle (Tank-to-Wheel and Well-to-Tank) and vehicle materials Cradle-to-Grave. An internal combustion engine diesel taxi was used as the reference vehicle for the currently available technology. This is compared to battery and fuel cell vehicle configurations. Accordingly, the following energy pathways are compared: diesel, electricity and hydrogen (derived from natural gas steam reforming). Full Life Cycle Analysis, using the PCO-CENEX drive cycle, (derived from actual London Taxi drive cycles) shows that the fuel cell powered vehicle configurations have lower energy consumption (4.34 MJ/km) and CO 2 emissions (235 g/km) than both the ICE Diesel (9.54 MJ/km and 738 g/km) and the battery electric vehicle (5.81 MJ/km and 269 g/km). - Highlights: → A Life Cycle Analysis of alternative vehicle technologies for the London Taxi was performed. → The hydrogen powered vehicles have the lowest energy consumption and CO 2 emissions results. → A hydrogen powered solution can be a sustainable alternative in a full life cycle framework.

Long life nickel electrodes for a nickel-hydrogen cell: Cycle life tests

Science.gov (United States)

Lim, H. S.; Verzwyvelt, S. A.

1985-01-01

In order to develop a long life nickel electrode for a Ni/H2 cell, the cycle life of nickel electrodes was tested in Ni/H2 boiler plate cells. A 19 test cell matrix was made of various nickel electrode designs including three levels each of plaque mechanical strength, median pore size of the plaque, and active material loading. Test cells were cycled to the end of their life (0.5v) in a 45 minute low Earth orbit cycle regime at 80% depth-of-discharge. It is shown that the active material loading level affects the cycle life the most with the optimum loading at 1.6 g/cc void. Mechanical strength does not affect the cycle life noticeably in the bend strength range of 400 to 700 psi. It is found that the best plaque is made of INCO nickel powder type 287 and has median pore size of 13 micron.

Asset Allocation Over the Life Cycle

DEFF Research Database (Denmark)

Fischer, Marcel; Kraft, Holger; Munk, Claus

2013-01-01

We study the welfare effect of tax-optimizing portfolio decisions in a life cycle model with unspanned labor income and realization-based capital gain taxation. For realistic parameterizations of our model, certainty equivalent welfare gains from fully tax-optimized portfolio decisions are less...... and instead assumes mark-to-market taxation, these gains are less than 0.5%. That is, our work provides a justification for ignoring taxes in life cycle portfolio choice problems - a wide-spread assumption in that literature. However, if capital gains are forgiven at death (as in the U.S.), investors...... with strong bequest motives face substantial welfare costs when not tax-optimizing their portfolio decisions towards the end of the life cycle....

Energy-containing beverages: reproductive hormones and ovarian function in the BioCycle Study123

Science.gov (United States)

Schliep, Karen C; Mumford, Sunni L; Pollack, Anna Z; Perkins, Neil J; Ye, Aijun; Zhang, Cuilin J; Stanford, Joseph B; Porucznik, Christina A; Hammoud, Ahmad O; Wactawski-Wende, Jean

2013-01-01

Background: Energy-containing beverages are widely consumed among premenopausal women, but their association with reproductive hormones is not well understood. Objective: The objective was to assess the association of energy-containing beverages, added sugars, and total fructose intake with reproductive hormones among ovulatory cycles and sporadic anovulation in healthy premenopausal women. Design: Women (n = 259) in the BioCycle Study were followed for up to 2 menstrual cycles; they provided fasting blood specimens during up to 8 visits/cycle and four 24-h dietary recalls/cycle. Results: Women who consumed ≥1 cup (1 cup = 237 mL) sweetened soda/d had 16.3% higher estradiol concentrations compared with women who consumed less sweetened soda (86.5 pg/mL compared with 74.4 pg/mL, P = 0.01) after adjustment for age, BMI, race, dietary factors, and physical activity. Similarly elevated estradiol concentrations were found for ≥1 cup cola/d and noncola soda intake. Neither artificially sweetened soda nor fruit juice intake ≥1 cup/d was significantly associated with reproductive hormones. Added sugar above the average US woman's intake (≥73.2 g/d) or above the 66th percentile in total fructose intake (≥41.5 g/d) was associated with significantly elevated estradiol but not consistently across all models. No associations were found between beverages, added sugars, or total fructose intake and anovulation after multivariate adjustment. Conclusions: Even at moderate consumption amounts, sweetened soda is associated with elevated follicular estradiol concentrations among premenopausal women but does not appear to affect ovulatory function. Further research into the mechanism driving the association between energy-containing beverages and reproductive hormones, and its potential implications for women's health, is warranted. PMID:23364018

Comparison between two forms of vaginally administered progesterone for luteal phase support in assisted reproduction cycles.

Science.gov (United States)

Geber, Selmo; Moreira, Ana Carolina Ferreira; de Paula, Sálua Oliveira Calil; Sampaio, Marcos

2007-02-01

The use of progesterone for luteal phase support has been demonstrated to be beneficial in assisted reproduction cycles using gonadotrophin-releasing hormone analogues (GnRHa). Two micronized progesterone preparations are available for vaginal administration: capsules and gel. The objective of this study was to compare the efficacy of these two forms for luteal phase support in assisted reproduction cycles. A total of 244 couples undergoing IVF/intracytoplasmic sperm injection cycles were included in the study and were randomly allocated (sealed envelopes) into two groups: group 1 (122) received vaginal capsules of 200 mg of micronized progesterone (Utrogestan), 3 times daily, and group 2 (122) received micronized progesterone in gel (Crinone 8%), once daily. Both groups received progesterone for 13 days beginning day 1 after oocyte retrieval, continuing until the pregnancy test was performed and until 12 weeks of pregnancy. Groups were compared by clinical data and assisted reproduction results and had similar ages and causes of infertility. Although the pregnancy rate was higher for those receiving progesterone gel than capsules (44.26 and 36.06% respectively), this difference was not statistically significant. The study showed that vaginal progesterone gel and capsules used for luteal phase support in assisted reproduction cycles with long protocol GnRHa result in similar pregnancy rates.

Adenomyosis: a life-cycle approach.

Science.gov (United States)

Benagiano, Giuseppe; Brosens, Ivo; Habiba, Marwan

2015-03-01

The life-cycle approach to endometriosis highlighted unexpected features of the condition; the same approach was therefore applied to gain insight into the clinical features of adenomyosis and to draw a comparison with endometriosis. This is possible today thanks to new imaging techniques enabling non-invasive diagnosis of adenomyosis. The specificity and sensitivity of magnetic resonance imaging and transvaginal ultrasound remain uncertain. Unlike endometriosis, little information is available on the presence of classic adenomyosis in adolescents, except for rare cystic forms that may not represent the true disease. Adenomyosis is most likely to affect adult women, although most reported incidences are still based on post-hysterectomy studies, and are affected by diligence in histopathologic diagnosis and the adopted cut-off point. The traditionally accepted associations of adult adenomyosis, such as multiparity, a link to infertility and its effect on pregnancy are uncertain. Active adenomyosis has been found in pre- and peri-menopausal women and in postmenopausal women receiving tamoxifen. In conclusion, major diagnostic limitations and the systematic bias of hysterectomy make it difficult to draw firm conclusions from existing evidence. In addition, no information is available on the natural history of adenomyosis and no study has systematically evaluated its existence in adolescents. Copyright © 2014 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

A NGS approach to the encrusting Mediterranean sponge Crella elegans (Porifera, Demospongiae, Poecilosclerida): transcriptome sequencing, characterization and overview of the gene expression along three life cycle stages.

Science.gov (United States)

Pérez-Porro, A R; Navarro-Gómez, D; Uriz, M J; Giribet, G

2013-05-01

Sponges can be dominant organisms in many marine and freshwater habitats where they play essential ecological roles. They also represent a key group to address important questions in early metazoan evolution. Recent approaches for improving knowledge on sponge biological and ecological functions as well as on animal evolution have focused on the genetic toolkits involved in ecological responses to environmental changes (biotic and abiotic), development and reproduction. These approaches are possible thanks to newly available, massive sequencing technologies-such as the Illumina platform, which facilitate genome and transcriptome sequencing in a cost-effective manner. Here we present the first NGS (next-generation sequencing) approach to understanding the life cycle of an encrusting marine sponge. For this we sequenced libraries of three different life cycle stages of the Mediterranean sponge Crella elegans and generated de novo transcriptome assemblies. Three assemblies were based on sponge tissue of a particular life cycle stage, including non-reproductive tissue, tissue with sperm cysts and tissue with larvae. The fourth assembly pooled the data from all three stages. By aggregating data from all the different life cycle stages we obtained a higher total number of contigs, contigs with blast hit and annotated contigs than from one stage-based assemblies. In that multi-stage assembly we obtained a larger number of the developmental regulatory genes known for metazoans than in any other assembly. We also advance the differential expression of selected genes in the three life cycle stages to explore the potential of RNA-seq for improving knowledge on functional processes along the sponge life cycle. © 2013 Blackwell Publishing Ltd.

Addressing the effect of social life cycle assessments

DEFF Research Database (Denmark)

Jørgensen, Andreas; Dreyer, Louise Camilla; Wangel, Arne

2012-01-01

the validity of these hypotheses. Results: Three in some cases potentially overlapping SLCA approaches are presented, assumed to create a beneficial effect in the life cycle in different ways. However, empirical and theoretical findings show that the beneficial effects proposed to arise from the use of each......Purpose: In the recently published ‘Guidelines for social life cycle assessment of products’, it is stated that the ultimate objective of developing the social life cycle assessment (SLCA) is to promote improvements of social conditions for the stakeholders in the life cycle. This article addresses...... how the SLCA should be developed so that its use promotes these improvements. Methods: Hypotheses of how the use of SLCA can promote improvement of social conditions in the life cycle are formulated, after which theories and empirical findings from relevant fields of research are used to address...

A framework for social life cycle impact assessment

DEFF Research Database (Denmark)

Dreyer, Louise Camilla; Hauschild, Michael Zwicky; Schierbeck, Jens

2006-01-01

Goal, Scope and Background. To enhance the use of life cycle assessment (LCA) as a tool in business decision-making, a methodology for Social life cycle impact assessment (LCIA) is being developed. Social LCA aims at facilitating companies to conduct business in a socially responsible manner...... by providing information about the potential social impacts on people caused by the activities in the life cycle of their product. The development of the methodology has been guided by a business perspective accepting that companies, on the one hand, have responsibility for the people affected...... in the life cycle rather than to the individual industrial processes, as is the case in Environmental LCA. Inventory analysis is therefore focused on the conduct of the companies engaged in the life cycle. A consequence of this view is that a key must be determined for relating the social profiles...

Reproductive cycle of the salmon-bellied racer, Mastigodryas melanolomus (Serpentes, Colubridae, from Costa Rica

Directory of Open Access Journals (Sweden)

Stephen R. Goldberg

2006-12-01

Full Text Available The purpose of this paper is to present new information on the reproductive cycle of M. melanolomus from Costa Rica based onhistological examination of gonadal material from museum specimens. The first information on the timing of the testicular cycle is alsopresented.

The Life Cycle of Centrioles

OpenAIRE

Hatch, E.; Stearns, T.

2010-01-01

Centrioles organize the centrosome and nucleate the ciliary axoneme, and the centriole life cycle has many parallels to the chromosome cycle. The centriole cycle in animals begins at fertilization with the contribution of two centrioles by the male gamete. In the ensuing cell cycles, the duplication of centrioles is controlled temporally, spatially, and numerically. As a consequence of the duplication mechanism, the two centrioles in a typical interphase cell are of different ages and have di...

Life-cycle testing of receiving waters with Ceriodaphnia dubia

Energy Technology Data Exchange (ETDEWEB)

Stewart, A.J.; Konetsky, B.K.

1996-12-31

Seven-day tests with Ceriodaphnia dubia are commonly used to estimate toxicity of effluents or receiving waters but can sometimes yield {open_quotes}no toxicity{close_quotes} outcomes even if pollutants are present. We conducted two sets of full life-cycle tests with C. dubia to (1) see if tests with longer exposure periods would reveal evidence for toxicity that might not be evident from 7-day tests, and (2) determine the relative importance of water quality versus food as factors influencing C. dubia reproduction. In the first set of tests, C. dubia was reared in diluted mineral water (negative control), water from a stream impacted by coal fly-ash, or water from a retention basin containing sediments contaminated with mercury, other metals and polychlorinated biphenyls. The second set of tests used water from the retention basin only, but this water was either filtered or not filtered, and food was either added or not added, prior to testing. C. dubia survival and reproduction did not differ much among the three water types in the first set of tests, but these two parameters were strongly affected by the filtering and food-addition treatments in the second set of tests. Thus, C. dubia appeared to be relatively insensitive to general water-quality factors, but quite sensitive to food-related factors. Regression analyses showed that the predictability of life-time reproduction by C. dubia from the results of 7-day tests was very low (R{sup 2}< 0.35) in five of the six experiments. The increase in predictability as a function of test duration also differed among water types in the first set of tests, and among treatments in the second set of tests. Thus, 7-day tests with C. dubia may be used to quantify water-quality problems, but it may not be possible to reliably extrapolate the results of these tests to longer time scales.

Life Cycle Assessment of Greenhouse Gas Emissions

NARCIS (Netherlands)

Reijnders, L.; Chen, W.Y.; Suzuki, T.; Lackner, M.

2015-01-01

Life cycle assessments of greenhouse gas emissions have been developed for analyzing products "from cradle to grave": from resource extraction to waste disposal. Life cycle assessment methodology has also been applied to economies, trade between countries, aspects of production, and waste

Detrimental consequences of women life cycle on the oral cavity

Directory of Open Access Journals (Sweden)

Jammula Surya Prasanna

2018-01-01

Full Text Available The majority of us visit a dentist only when we experience a toothache, as visiting the dentist regularly is the last thing that strikes our mind. Many clinical studies have concluded that oral bacteria can lead to a genre of health conditions which may sometimes be very serious. As females go, through certain stages in their reproductive life cycle, alterations arise in the level of sex steroid hormones circulating in their bloodstream. Specifically, variations in levels of progesterone and estrogen in women may adversely affect the periodontal tissues in the mouth. Extensive research suggests a relationship between periodontal diseases and puberty, menstruation, pregnancy, oral contraceptive use, and menopause. Estrogen and progesterone affect the entire body, including the oral tissues. The gingival tissues respond to this increased level of estrogen and progesterone by undergoing vasodilatation and increased capillary permeability. Consequently, there is an increased migration of fluid and white blood cells out of blood vessels. Also associated with increased progesterone levels are alterations in the existing microbial populations. The levels of Gram-negative anaerobic bacteria, such as Prevotella intermedia, increase as a result of the high concentration of hormones available as a nutrient for growth. This article discusses the plethora of causes which affect the oral health of women as they undergo the different life cycles.

Life-Cycle Cost-Benefit Analysis

DEFF Research Database (Denmark)

Thoft-Christensen, Palle

2010-01-01

The future use of Life-Cycle Cost-Benefit (LCCB) analysis is discussed in this paper. A more complete analysis including not only the traditional factors and user costs, but also factors which are difficult to include in the analysis is needed in the future.......The future use of Life-Cycle Cost-Benefit (LCCB) analysis is discussed in this paper. A more complete analysis including not only the traditional factors and user costs, but also factors which are difficult to include in the analysis is needed in the future....

Life cycle assessment of greenhouse gas emissions

NARCIS (Netherlands)

Reijnders, L.; Chen, W.Y.; Seiner, J.; Suzuki, T.; Lackner, M.

2012-01-01

Life cycle assessments of greenhouse gas emissions have been developed for analyzing products "from cradle to grave": from resource extraction to waste disposal. Life cycle assessment methodology has also been applied to economies, trade between countries, aspects of production and to waste

Life cycle assessment of greenhouse gas emissions

NARCIS (Netherlands)

Reijnders, L.; Chen, W.-Y.; Suzuki, T.; Lackner, M.

2017-01-01

Life cycle assessments of greenhouse gas emissions have been developed for analyzing products “from cradle to grave”: from resource extraction to waste disposal. Life cycle assessment methodology has also been applied to economies, trade between countries, aspects of production, and waste

Corporate entrepreneurship in organisational life-cycle

OpenAIRE

Duobienė, Jurga

2013-01-01

Paper deals with the development of corporate entrepreneurship in different stages of organisational life-cycle. The research presents a model for the evaluation of corporate entrepreneurship and systemises relevant theoretical and empirical research in the field of entrepreneurship and corporate entrepreneurship. Moreover, it describes the development of corporate entrepreneurship in the entire organisational life-cycle since most of researchers who discuss the topics of corporate entreprene...

LIFE CYCLE OF A WINE BRAND

Directory of Open Access Journals (Sweden)

Viktoriia Paziuk

2015-11-01

Full Text Available The aim of the work is to determine the life cycle of the wine brand, the development of ways to improve its effectiveness at different stages of the life cycle. Being scientifically informed of the existence of the life cycle of the brand allows modern enterprises to enhance their competitive position in the market and take advantage of the acquired differences in order to attract more attention from consumers. Methods. The study is based on scientific methods of research of economic phenomena: the dialectic, abstract logical (in the exercise of theoretical generalizations to the definition of the concept of «life cycle of the perpetrator of the brand, a scientific abstraction, comparison and ordering (the study of factors influencing the life cycle of the perpetrator of the brand and the factors influencing a choice of products for consumers, statistical and problem-chronological (the study of the requirements of the brand in a changing consumer preferences, logical generalization (in determining the social and ethical functions guilty brand. Results. The stages of the life cycle of the wine brand, which take into account its characteristics and form its social and ethical functions. Describing the requirements for the wine brand in the changing tastes and preferences of consumers. Specification of wine promotion of the brand in an increasingly competitive environment. Preconditions have been set for a new wine brand. The practical significance. The brand always increases the value of the product and its entry into new markets, as well as reduces the time to attract consumers. Possibility to ensure the growth of the brand in a declining market; building market share in a highly competitive environment; marketing innovative products in order to create a new sales strategy. After all, to gain and maintain the popularity of a certain product, one must personalize it with giving associations and a way to provide it with distinctive features. Only

Life Cycle Development of Obesity and Its Determinants

DEFF Research Database (Denmark)

Cavaco, Sandra; Eriksson, Tor; Skalli, Ali

This paper is concerned with how obesity and some of its determinants develop over individuals’ life cycles. In particular we examine empirically the role and relative importance of early life conditions (parents’ education and socioeconomic status) and individuals’ own education as adults and how...... their impacts on the probability of overweight and obesity evolves over the life cycle. As the data set includes information about the individuals’ health behaviours (smoking and physical exercise) at various ages we can also examine the impact of these at different stages of the persons’ life cycle. The data......’ socioeconomic status predicts obesity in early adulthood whereas individuals’ own socioeconomic status as adults is more important in explaining obesity at later stages of the life cycle, and (iii) changes in obesity status are associated with changes in health behaviours....

Metadata Life Cycles, Use Cases and Hierarchies

Directory of Open Access Journals (Sweden)

Ted Habermann

2018-05-01

Full Text Available The historic view of metadata as “data about data” is expanding to include data about other items that must be created, used, and understood throughout the data and project life cycles. In this context, metadata might better be defined as the structured and standard part of documentation, and the metadata life cycle can be described as the metadata content that is required for documentation in each phase of the project and data life cycles. This incremental approach to metadata creation is similar to the spiral model used in software development. Each phase also has distinct users and specific questions to which they need answers. In many cases, the metadata life cycle involves hierarchies where latter phases have increased numbers of items. The relationships between metadata in different phases can be captured through structure in the metadata standard, or through conventions for identifiers. Metadata creation and management can be streamlined and simplified by re-using metadata across many records. Many of these ideas have been developed to various degrees in several Geoscience disciplines and are being used in metadata for documenting the integrated life cycle of environmental research in the Arctic, including projects, collection sites, and datasets.

Specification of life cycle assessment in nuclear power plants

International Nuclear Information System (INIS)

Abbaspour, M.; Kargari, N.; Mastouri, R.

2008-01-01

Life Cycle Assessment is an environmental management tool for assessing the environmental impacts of a product of a process. life cycle assessment involves the evaluation of environmental impacts through all stages of life cycle of a product or process. In other words life cycle assessment has a c radle to grave a pproach. Some results of life cycle assessment consist of pollution prevention, energy efficient system, material conservation, economic system and sustainable development. All power generation technologies affect the environment in one way or another. The main environmental impact does not always occur during operation of power plant. The life cycle assessment of nuclear power has entailed studying the entire fuel cycle from mine to deep repository, as well as the construction, operation and demolition of the power station. Nuclear power plays an important role in electricity production for several countries. even though the use of nuclear power remains controversial. But due to the shortage of fossil fuel energy resources many countries have started to try more alternation to their sources of energy production. A life cycle assessment could detect all environmental impacts of nuclear power from extracting resources, building facilities and transporting material through the final conversion to useful energy services

Full Life Cycle of Data Analysis with Climate Model Diagnostic Analyzer (CMDA)

Science.gov (United States)

Lee, S.; Zhai, C.; Pan, L.; Tang, B.; Zhang, J.; Bao, Q.; Malarout, N.

2017-12-01

We have developed a system that supports the full life cycle of a data analysis process, from data discovery, to data customization, to analysis, to reanalysis, to publication, and to reproduction. The system called Climate Model Diagnostic Analyzer (CMDA) is designed to demonstrate that the full life cycle of data analysis can be supported within one integrated system for climate model diagnostic evaluation with global observational and reanalysis datasets. CMDA has four subsystems that are highly integrated to support the analysis life cycle. Data System manages datasets used by CMDA analysis tools, Analysis System manages CMDA analysis tools which are all web services, Provenance System manages the meta data of CMDA datasets and the provenance of CMDA analysis history, and Recommendation System extracts knowledge from CMDA usage history and recommends datasets/analysis tools to users. These four subsystems are not only highly integrated but also easily expandable. New datasets can be easily added to Data System and scanned to be visible to the other subsystems. New analysis tools can be easily registered to be available in the Analysis System and Provenance System. With CMDA, a user can start a data analysis process by discovering datasets of relevance to their research topic using the Recommendation System. Next, the user can customize the discovered datasets for their scientific use (e.g. anomaly calculation, regridding, etc) with tools in the Analysis System. Next, the user can do their analysis with the tools (e.g. conditional sampling, time averaging, spatial averaging) in the Analysis System. Next, the user can reanalyze the datasets based on the previously stored analysis provenance in the Provenance System. Further, they can publish their analysis process and result to the Provenance System to share with other users. Finally, any user can reproduce the published analysis process and results. By supporting the full life cycle of climate data analysis

Gender issues in reproductive health: a review.

Science.gov (United States)

Adinma, Echendu D; Adinma, Brian-D J I

2011-01-01

Gender, for its impact on virtually every contemporary life issue, can rightly be regarded as a foremost component of reproductive health. Reproductive health basically emphasises on people and their rights to sexuality, reproduction, and family planning, and the information to actualize these right, which has been inextricably linked to development at the International Conference on Population and Development (ICPD) held in Cairo, Egypt, in 1994. Women's sexual and reproductive rights became recognised as universal human right, violations of which occur in some reproductive health areas including gender concerns. Gender inequality and inequity encompass gender based violence as well as gender discrimination which cuts across the life cycle of the woman; attitudes, religious and cultural practices of various nations; and issues related to employment, economy, politics, and development. The redress of gender inequality is a collective responsibility of nations and supranational agencies. Nations should adopt a framework hinged on three pedestals--legal, institutional and policy, employing the three recommended approaches of equal treatment, positive action, and gender mainstreaming.

From life cycle talking to taking action

NARCIS (Netherlands)

Potting, J.; Curran, M.A.; Blottnitz, von H.

2010-01-01

Introduction - The biannual Life Cycle Management conference series aims to create a platform for users and developers of Life Cycle Assessment (LCA) and related tools to share their experiences. A key concern of the LCM community has been to move beyond the production of LCA reports toward using

Ovarian cycling and reproductive state shape the vaginal microbiota in wild baboons.

Science.gov (United States)

Miller, Elizabeth A; Livermore, Joshua A; Alberts, Susan C; Tung, Jenny; Archie, Elizabeth A

2017-01-19

The vaginal microbiome is an important site of bacterial-mammalian symbiosis. This symbiosis is currently best characterized for humans, where lactobacilli dominate the microbial community and may help defend women against infectious disease. However, lactobacilli do not dominate the vaginal microbiota of any other mammal studied to date, raising key questions about the forces that shape the vaginal microbiome in non-human mammals. We used Illumina sequencing of the bacterial 16S rRNA gene to investigate variation in the taxonomic composition of the vaginal microbiota in 48 baboons (Papio cynocephalus), members of a well-studied wild population in Kenya. Similar to prior studies, we found that the baboon vaginal microbiota was not dominated by lactobacilli. Despite this difference, and similar to humans, reproductive state was the dominant predictor of baboon vaginal microbiota, with pregnancy, postpartum amenorrhea, and ovarian cycling explaining 18% of the variance in community composition. Furthermore, among cycling females, a striking 39% of variance in community composition was explained by ovarian cycle phase, with an especially distinctive microbial community around ovulation. Periovulatory females exhibited the highest relative abundance of lactic acid-producing bacteria compared to any other phase, with a mean relative abundance of 44%. To a lesser extent, sexual behavior, especially a history of shared sexual partners, also predicted vaginal microbial similarity between baboons. Despite striking differences in their dominant microbes, both human and baboon vaginal microbiota exhibit profound changes in composition in response to reproductive state, ovarian cycle phase, and sexual behavior. We found major shifts in composition during ovulation, which may have implications for disease risk and conception success. These findings highlight the need for future studies to account for fine-scale differences in reproductive state, particularly differences between

Asset life cycle plans: twelve steps to assist strategic decision-making in asset life cycle management

NARCIS (Netherlands)

Ruitenburg, Richard Jacob; Braaksma, Anne Johannes Jan; van Dongen, Leonardus Adriana Maria; Carnero, Maria Carmen; Gonzalez-Prida, Vicente

2017-01-01

Effective management of physical assets should deliver maximum business value. Therefore, Asset Management standards such as PAS 55 and ISO 55000 ask for a life cycle approach. However, most existing methods focus only on the short term of the asset's life or the estimation of its remaining life.

Airway exposure to multi-walled carbon nanotubes disrupts the female reproductive cycle without affecting pregnancy outcomes in mice

DEFF Research Database (Denmark)

Johansson, Hanna Katarina Lilith; Hansen, J. S.; Elfving, B.

2017-01-01

response and inflammation in experimental animals, which may affect female reproduction. This proof-of-principle study therefore aimed to investigate if lung exposure by intratracheal instillation of the MWCNT NM-400 would affect the estrous cycle and reproductive function in female mice.Results: Estrous...... of irregular cycling after exposure. Our data indicates that MWCNT exposure may interfere with events leading to ovulation....

Investigations on the metabolism of metals in decapod crustaceas in relation with moulting cycles and reproduction

International Nuclear Information System (INIS)

Martin, J.-L.M.

1975-07-01

A study of the metabolism of metals was carried out in decapod crustaceas; it showed that it was subject to cyclic variations during the life of the animals, closely correlated with growth moults. The metabolism of metals was also considered in its relations with reproduction, especially oogenesis and spermatogenesis, and embryonic development. In relation with moult, various factors playing a role on metal metabolism were investigated: role of metals in the organism, fasting and nutrition cycles and biochemical reserves, physico-chemical form of the metal and ultrastructure of uptake surfaces. The histological and histochemical aspects of the uptake of a number of metals were studied as well as inter-metallic and inter-organic relationships [fr

A life cycle database for parasitic acanthocephalans, cestodes, and nematodes

Science.gov (United States)

Benesh, Daniel P.; Lafferty, Kevin D.; Kuris, Armand

2017-01-01

Parasitologists have worked out many complex life cycles over the last ~150 years, yet there have been few efforts to synthesize this information to facilitate comparisons among taxa. Most existing host-parasite databases focus on particular host taxa, do not distinguish final from intermediate hosts, and lack parasite life-history information. We summarized the known life cycles of trophically transmitted parasitic acanthocephalans, cestodes, and nematodes. For 973 parasite species, we gathered information from the literature on the hosts infected at each stage of the parasite life cycle (8510 host-parasite species associations), what parasite stage is in each host, and whether parasites need to infect certain hosts to complete the life cycle. We also collected life-history data for these parasites at each life cycle stage, including 2313 development time measurements and 7660 body size measurements. The result is the most comprehensive data summary available for these parasite taxa. In addition to identifying gaps in our knowledge of parasite life cycles, these data can be used to test hypotheses about life cycle evolution, host specificity, parasite life-history strategies, and the roles of parasites in food webs.

Potential Gains in Reproductive-Aged Life Expectancy by Eliminating Maternal Mortality

DEFF Research Database (Denmark)

Canudas-Romo, Vladimir; Liu, L; Zimmerman, L

2014-01-01

Objective: We assessed the change over time in the contribution of maternal mortality to a life expectancy calculated between ages 15 and 49, or Reproductive-Aged Life Expectancy (RALE). Our goal was to estimate the increase in RALE in developed countries over the twentieth century and the hypoth......Objective: We assessed the change over time in the contribution of maternal mortality to a life expectancy calculated between ages 15 and 49, or Reproductive-Aged Life Expectancy (RALE). Our goal was to estimate the increase in RALE in developed countries over the twentieth century....... Findings: In developed countries, five years in RALE were gained over the twentieth century, of which approximately 10%, or half a year, was attributable to reductions in maternal mortality. In sub-Saharan African countries, the possible achievable gains fluctuate between 0.24 and 1.47 years, or 6% and 44...

Reproductive performance of female goats fed life-enzyme ...

African Journals Online (AJOL)

Direct-fed-microbes (DFM) (life-enzyme) was prepared in a traditional setting using Zymomonas mobilis (bacteria from palm sap) to ferment sawdust. The result revealed an improvement in the nutrient content of the sawdust and its feed values (protein, fibre etc.), and the feed usage efficiency. The reproductive ...

Gas fired combined cycle plant in Singapore: energy use, GWP and cost-a life cycle approach

International Nuclear Information System (INIS)

Kannan, R.; Leong, K.C.; Osman, Ramli; Ho, H.K.; Tso, C.P.

2005-01-01

A life cycle assessment was performed to quantify the non-renewable (fossil) energy use and global warming potential (GWP) in electricity generation from a typical gas fired combined cycle power plant in Singapore. The cost of electricity generation was estimated using a life cycle cost analysis (LCCA) tool. The life cycle assessment (LCA) of a 367.5 MW gas fired combined cycle power plant operating in Singapore revealed that hidden processes consume about 8% additional energy in addition to the fuel embedded energy, and the hidden GWP is about 18%. The natural gas consumed during the operational phase accounted for 82% of the life cycle cost of electricity generation. An empirical relation between plant efficiency and life cycle energy use and GWP in addition to a scenario for electricity cost with varying gas prices and plant efficiency have been established

DETERMINANTS OF ENTERPRISES LIFE CYCLE IN MODERN CONDITIONS OF DEVELOPMENT

Directory of Open Access Journals (Sweden)

Alla Polianska

2016-03-01

Full Text Available In the article the theoretical basis of organization life cycle research as well as the particularly of the organization life cycle concept implementation for solving of modern targets of enterprises and organizations development are highlighted. The determinants of one life cycle stage transformation to the other at the enterprises, that allows to better understand the conditions of its functioning and to identify factors that affect the viability of the company and its duration, are considered. Management technologies at different stages of organizations life cycle are proposed. Keywords: enterprise, development, organizations life cycle, determinants, Oil and Gas company JEL: M 20

The Life Cycle Analysis Toolbox

International Nuclear Information System (INIS)

Bishop, L.; Tonn, B.E.; Williams, K.A.; Yerace, P.; Yuracko, K.L.

1999-01-01

The life cycle analysis toolbox is a valuable integration of decision-making tools and supporting materials developed by Oak Ridge National Laboratory (ORNL) to help Department of Energy managers improve environmental quality, reduce costs, and minimize risk. The toolbox provides decision-makers access to a wide variety of proven tools for pollution prevention (P2) and waste minimization (WMin), as well as ORNL expertise to select from this toolbox exactly the right tool to solve any given P2/WMin problem. The central element of the toolbox is a multiple criteria approach to life cycle analysis developed specifically to aid P2/WMin decision-making. ORNL has developed numerous tools that support this life cycle analysis approach. Tools are available to help model P2/WMin processes, estimate human health risks, estimate costs, and represent and manipulate uncertainties. Tools are available to help document P2/WMin decision-making and implement programs. Tools are also available to help track potential future environmental regulations that could impact P2/WMin programs and current regulations that must be followed. An Internet-site will provide broad access to the tools

The life cycle of centrioles.

Science.gov (United States)

Hatch, E; Stearns, T

2010-01-01

Centrioles organize the centrosome and nucleate the ciliary axoneme, and the centriole life cycle has many parallels to the chromosome cycle. The centriole cycle in animals begins at fertilization with the contribution of two centrioles by the male gamete. In the ensuing cell cycles, the duplication of centrioles is controlled temporally, spatially, and numerically. As a consequence of the duplication mechanism, the two centrioles in a typical interphase cell are of different ages and have different functions. Here, we discuss how new centrioles are assembled, what mechanisms limit centriole number, and the consequences of the inherent asymmetry of centriole duplication and segregation.

Life Cycle Costing: An Introduction

DEFF Research Database (Denmark)

Rödger, Jan-Markus; Kjær, Louise Laumann; Pagoropoulos, Aris

2018-01-01

The chapter gives an introduction to life cycle costing (LCC) and how it can be used to support decision-making. It can form the economic pillar in a full life cycle sustainability assessment, but often system delimitations differ depending on the goal and scope of the study. To provide a profound...... as well as guidance on how to collect data to overcome this hurdle. In an illustrative case study on window frames, the eLCC theory is applied and demonstrated with each step along the eLCC procedure described in detail. A final section about advanced LCC introduces how to monetarise externalities and how...

Towards a Life Cycle Based Chemical Alternative Assessment (LCAA)

DEFF Research Database (Denmark)

Jolliet, O.; Huang, L.; Overcash, Michael

2017-01-01

approach combines the following elements: a) The manufacturing phase chemical inventory is based on the environmental genome of industrial products database, ensuring mass and energy balance, b) near-field exposure to consumer products during the use phase is determined based on the mass of chemical......There is a need for an operational quantitative screening-level assessment of alternatives, that is life-cycle based and able to serve both Life cycle Assessment (LCA and chemical alternatives assessment (CAA). This presentation therefore aims to develop and illustrate a new approach called “Life...... Cycle Based Chemical Alternative Assessment (LCAA)” that will quantify exposure and life cycle impacts consistently and efficiently over the main life cycle stages. The new LCAA approach is illustrated though a proof-of-concept case study of alternative plasticizers in vinyl flooring. The proposed LCAA...

Venous thromboembolism in assisted reproductive technologies: comparison between unsuccessful versus successful cycles in an Italian cohort.

Science.gov (United States)

Villani, Michela; Favuzzi, Giovanni; Totaro, Pasquale; Chinni, Elena; Vecchione, Gennaro; Vergura, Patrizia; Fischetti, Lucia; Margaglione, Maurizio; Grandone, Elvira

2018-02-01

Pregnancies after assisted reproductive technologies (ART) have been associated with an increased risk of venous thromboembolism (VTE). On the contrary, the magnitude of this risk in unsuccessful ART cycles (not resulting in a clinical pregnancy) has not yet been clearly defined. In this study, we evaluated the incidence of VTE in unsuccessful cycles and compared it with that recorded in successful cycles in the same study population. From a cohort of 998 women consecutively referred by local Fertility Clinics to our Atherosclerosis and Thrombosis Unit (April 2002-July 2011), we identified and included women with at least one cycle of ovarian stimulation and a negative history for VTE. Overall, 661 women undergone 1518 unsuccessful and 318 successful cycles of ovarian stimulation, respectively, were analysed. VTE events occurred in 2/1518 (1.3‰) unsuccessful cycles compared with 3/318 (9.4‰) successful cycles, (Two-tailed Fisher exact test, p = 0.04, OR 0.14, 95% CI 0.02-1.02). Both cases observed in unsuccessful cycles were isolated pulmonary embolism occurred after OHSS; no antithrombotic prophylaxis had been prescribed. At logistic regression analysis, the occurrence of successful cycle and BMI were significantly and independently associated with the occurrence of VTE with an OR of 13.94 (95% CI 1.41-137.45) and 1.23 (95% CI 1.01-1.49), respectively. VTE incidence is significantly lower in unsuccessful cycles as compared to that of successful ones. However, although rare, thrombotic risk during ovarian stimulation cannot be excluded and, when it occurs, can be life-threatening. Therefore, particular attention should be paid to these women, independently of ART outcome.

Survey on the life cycle system of a product with shared information; Joho kyoyugata product life cycle system ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This report provides and proposes new concept and optimization technology on the life cycle system of product for emission minimum. For the proposed life cycle system of product with shared information, the global emission minimum is realized by considering the final emission, the information is given to the product and shared in all the life cycle system, the information sending function is considered from the product, and the information necessary for material processing are actively used. For this life cycle system of product, development of the information model for the system, development of the technology of data saving, renewing, searching and sending, development of sensing and re-using technologies of the product for life cycle, development of the technology attaching information in the product for emission minimum, design of the guidelines of material composition, and research and development of materials for emission minimum are extracted and provided as tasks. 26 refs., 69 figs., 8 tabs.

Comparing the Life Cycle Energy Consumption, Global ...

Science.gov (United States)

Managing the water-energy-nutrient nexus for the built environment requires, in part, a full system analysis of energy consumption, global warming and eutrophication potentials of municipal water services. As an example, we evaluated the life cycle energy use, greenhouse gas (GHG) emissions and aqueous nutrient releases of the whole anthropogenic municipal water cycle starting from raw water extraction to wastewater treatment and reuse/discharge for five municipal water and wastewater systems. The assessed options included conventional centralized services and four alternative options following the principles of source-separation and water fit-for-purpose. The comparative life cycle assessment identified that centralized drinking water supply coupled with blackwater energy recovery and on-site greywater treatment and reuse was the most energyand carbon-efficient water service system evaluated, while the conventional (drinking water and sewerage) centralized system ranked as the most energy- and carbon-intensive system. The electricity generated from blackwater and food residuals co-digestion was estimated to offset at least 40% of life cycle energy consumption for water/waste services. The dry composting toilet option demonstrated the lowest life cycle eutrophication potential. The nutrients in wastewater effluent are the dominating contributors for the eutrophication potential for the assessed system configurations. Among the parameters for which variability

Analysis of interconnecting energy systems over a synchronized life cycle

International Nuclear Information System (INIS)

Nian, Victor

2016-01-01

Highlights: • A methodology is developed for evaluating a life cycle of interconnected systems. • A new concept of partial temporal boundary is introduced via quantitative formulation. • The interconnecting systems are synchronized through the partial temporal boundary. • A case study on the life cycle of the coal–uranium system is developed. - Abstract: Life cycle analysis (LCA) using the process chain analysis (PCA) approach has been widely applied to energy systems. When applied to an individual energy system, such as coal or nuclear electricity generation, an LCA–PCA methodology can yield relatively accurate results with its detailed process representation based on engineering data. However, there are fundamental issues when applying conventional LCA–PCA methodology to a more complex life cycle, namely, a synchronized life cycle of interconnected energy systems. A synchronized life cycle of interconnected energy systems is established through direct interconnections among the processes of different energy systems, and all interconnecting systems are bounded within the same timeframe. Under such a life cycle formation, there are some major complications when applying conventional LCA–PCA methodology to evaluate the interconnecting energy systems. Essentially, the conventional system and boundary formulations developed for a life cycle of individual energy system cannot be directly applied to a life cycle of interconnected energy systems. To address these inherent issues, a new LCA–PCA methodology is presented in this paper, in which a new concept of partial temporal boundary is introduced to synchronize the interconnecting energy systems. The importance and advantages of these new developments are demonstrated through a case study on the life cycle of the coal–uranium system.

Freeze-all cycle in reproductive medicine: current perspectives.

Science.gov (United States)

Roque, Matheus; Valle, Marcello; Kostolias, Alessandra; Sampaio, Marcos; Geber, Selmo

2017-02-01

The freeze-all strategy has emerged as an alternative to fresh embryo transfer (ET) during in vitro fertilization (IVF) cycles. Although fresh ET is the norm during assisted reproductive therapies (ART), there are many concerns about the possible adverse effects of controlled ovarian stimulation (COS) over the endometrium. The supra-physiologic hormonal levels that occur during a conventional COS are associated with modifications in the peri-implantation endometrium, which may be related to a decrease in pregnancy rates and poorer obstetric and perinatal outcomes when comparing fresh to frozen-thawed embryo transfers. The main objective of this study was to assess the available literature regarding the freeze-all strategy in IVF cycles, in regards to effectiveness and safety. Although there are many potential advantages in performing a freeze-all cycle over a fresh ET, it seems that the freeze-all strategy is not designed for all IVF patients. There is a need to develop a non-invasive clinical tool to evaluate the endometrial receptivity during a fresh cycle, which enables the selection of patients that would benefit from this strategy. Today, it is reasonable to perform elective cryopreservation of all oocytes/embryos in cases with a risk of OHSS development, and in patients with supra-physiologic hormonal levels during the follicular phase of COS. It is not clear if all normal responders and poor responders may benefit from this strategy.

Life Cycle Impact Assessment Research Developments and Needs

Science.gov (United States)

Life Cycle Impact Assessment (LCIA) developments are explained along with key publications which record discussions which comprised ISO 14042 and SETAC document development, UNEP SETAC Life Cycle Initiative research, and research from public and private research institutions. It ...

Predicting product life cycle using fuzzy neural network

Directory of Open Access Journals (Sweden)

Ali Mohammadi

2014-09-01

Full Text Available One of the most important tasks of science in different fields is to find the relationships among various phenomena in order to predict future. Production and service organizations are not exceptions and they should predict future to survive. Predicting the life cycle of the organization's products is one of the most important prediction cases in an organization. Predicting the product life cycle provides an opportunity to identify the product position and help to get a better insight about competitors. This paper deals with the predictability of the product life cycle with Adaptive Network-Based Fuzzy Inference System (ANFIS. The Population of this study was Pegah Fars products and the sample was this company's cheese products. In this regard, this paper attempts to model and predict the product life cycle of cheese products in Pegah Fars Company. In this due, a designed questionnaire was distributed among some experts, distributors and retailers and seven independent variables were selected. In this survey, ANFIS sales forecasting technique was employed and MATLAB software was used for data analysis. The results confirmed ANFIS as a good method to predict the product life cycle.

Developing the Social Life Cycle Assessment

DEFF Research Database (Denmark)

Jørgensen, Andreas

social audits. Through an interview with a social auditor it is suggested that the auditor varies the procedures for carrying out the audit in order to get the most valid result. For example, the auditor has to take into account the various tricks a company in a given context normally uses to cheat......This thesis seeks to add to the development of the Social Life Cycle Assessment (SLCA), which can be defined as an assessment method for assessing the social impacts connected to the life cycle of a product, service or system. In such development it is important to realise that the SLCA is only...... appealing to the extent that it does what it is supposed to do. In this thesis, this goal of SLCA is defined as to support improvements of the social conditions for the stakeholders throughout the life cycle of the assessed product, system or service. This effect should arise through decision makers...

Implementing risk-informed life-cycle design

International Nuclear Information System (INIS)

Hill, Ralph S.

2009-01-01

This paper describes a design process based on risk-informed probabilistic design methodologies that cover a facility's life-cycle from start of conceptual design through decontamination and decommissioning. The concept embodies use of probabilistic risk assessments to establish target reliabilities for facility systems and components. The target reliabilities are used for system based code margin exchange and performance simulation analyses to optimize design over all phases (design, construction, operation and decommissioning) of a facility's life-cycle. System based code margin exchange reduces excessive level of construction margins for passive components to appropriate levels resulting in a more flexible structure of codes and standards that improves facility reliability and cost. System and subsystem simulation analyses determine the optimum combination of initial system and component construction reliability, maintenance frequency, and inspection frequency for both active and passive components. The paper includes a description of these risk-informed life-cycle design processes, a summary of work being done, and a discussion of additional work needed to implement the process.

Endocrinology of human female sexuality, mating, and reproductive behavior.

Science.gov (United States)

Motta-Mena, Natalie V; Puts, David A

2017-05-01

Hormones orchestrate and coordinate human female sexual development, sexuality, and reproduction in relation to three types of phenotypic changes: life history transitions such as puberty and childbirth, responses to contextual factors such as caloric intake and stress, and cyclical patterns such as the ovulatory cycle. Here, we review the endocrinology underlying women's reproductive phenotypes, including sexual orientation and gender identity, mate preferences, competition for mates, sex drive, and maternal behavior. We highlight distinctive aspects of women's sexuality such as the possession of sexual ornaments, relatively cryptic fertile windows, extended sexual behavior across the ovulatory cycle, and a period of midlife reproductive senescence-and we focus on how hormonal mechanisms were shaped by selection to produce adaptive outcomes. We conclude with suggestions for future research to elucidate how hormonal mechanisms subserve women's reproductive phenotypes. Copyright © 2016 Elsevier Inc. All rights reserved.

The role of fecundity and reproductive effort in defining life-history strategies of North American freshwater mussels.

Science.gov (United States)

Haag, Wendell R

2013-08-01

Selection is expected to optimize reproductive investment resulting in characteristic trade-offs among traits such as brood size, offspring size, somatic maintenance, and lifespan; relative patterns of energy allocation to these functions are important in defining life-history strategies. Freshwater mussels are a diverse and imperiled component of aquatic ecosystems, but little is known about their life-history strategies, particularly patterns of fecundity and reproductive effort. Because mussels have an unusual life cycle in which larvae (glochidia) are obligate parasites on fishes, differences in host relationships are expected to influence patterns of reproductive output among species. I investigated fecundity and reproductive effort (RE) and their relationships to other life-history traits for a taxonomically broad cross section of North American mussel diversity. Annual fecundity of North American mussel species spans nearly four orders of magnitude, ranging from 200000). Estimates of RE also were highly variable, ranging among species from 0.06 to 25.4%. Median fecundity and RE differed among phylogenetic groups, but patterns for these two traits differed in several ways. For example, the tribe Anodontini had relatively low median fecundity but had the highest RE of any group. Within and among species, body size was a strong predictor of fecundity and explained a high percentage of variation in fecundity among species. Fecundity showed little relationship to other life-history traits including glochidial size, lifespan, brooding strategies, or host strategies. The only apparent trade-off evident among these traits was the extraordinarily high fecundity of Leptodea, Margaritifera, and Truncilla, which may come at a cost of greatly reduced glochidial size; there was no relationship between fecundity and glochidial size for the remaining 61 species in the dataset. In contrast to fecundity, RE showed evidence of a strong trade-off with lifespan, which was

Reporting in vitro fertilization cycles to the Society for Assisted Reproductive Technology database: where have all the cycles gone?

Science.gov (United States)

Kulak, David; Jindal, Sangita K; Oh, Cheongeun; Morelli, Sara S; Kratka, Scott; McGovern, Peter G

2016-04-01

To assess the relationship between live birth rates (LBRs) and the incidence of under-reported cycles by IVF clinics. Cohort study. Not applicable. All patients undergoing IVF cycles in the aforementioned clinics. Not applicable. The reporting percentage (RP), defined as number of cycles with reported pregnancy rates divided by total cycles performed. Results from cryopreservation cycles are only presented by SART if an embryo transfer occurs. Thus, RP decreases as incidence of embryo or oocyte banking cycles increases. The LBRs in women aged cycles than the median. In clinics with very low RP, the cycles that are reported have higher success rates. Regardless of intent, the reduction of reported data to SART makes it increasingly difficult for clinicians and patients to accurately assess a clinic's success rates. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

KOH concentration effect on cycle life of nickel-hydrogen cells

Science.gov (United States)

Lim, Hong S.; Verzwyvelt, S. A.

1987-01-01

A cycle life test of Ni/H2 cells containing electrolytes of various KOH concentrations and a sintered type nickel electrode was carried out at 23 C using a 45 min accelerated low Earth orbit (LEO) cycle regime at 80 percent depth of discharge. One of three cells containing 26 percent KOH has achieved over 28,000 cycles, and the other two 19,000 cycles, without a sign of failure. Two other cells containing 31 percent KOH electrolyte, which is the concentration presently used in aerospace cells, failed after 2,979 and 3,620 cycles. This result indicates that the cycle life of the present type of Ni/H2 cells may be extended by a factor of 5 to 10 simply by lowering the KOH concentration. Long cycle life of a Ni/H2 battery at high depth-of-discharge operation is desired, particularly for an LEO spacecraft application. Typically, battery life of about 30,000 cycles is required for a five year mission in an LEO. Such a cycle life with presently available cells can be assured only at a very low depth-of-discharge operation. Results of testing already show that the cycle life of an Ni/H2 cell is tremendously improved by simply using an electrolyte of low KOH concentration.

Life-cycle analysis of renewable energy systems

DEFF Research Database (Denmark)

Sørensen, Bent

1994-01-01

An imlementation of life-cycle analysis (LCA) for energy systems is presented and applied to two renewable energy systems (wind turbines and building-integrated photovoltaic modules) and compared with coal plants......An imlementation of life-cycle analysis (LCA) for energy systems is presented and applied to two renewable energy systems (wind turbines and building-integrated photovoltaic modules) and compared with coal plants...

Life cycle versus balanced funds: An emerging market perspective

Directory of Open Access Journals (Sweden)

Elbie Louw

2017-08-01

Full Text Available Background: Inadequate retirement savings is an international challenge. Additionally, individuals are not cognisant of how asset allocation choices ultimately impact retirement savings. Life cycle and balanced funds are popular asset allocation strategies to save towards retirement. However, recent research is questioning the efficacy of life cycle funds that switch to lower risk asset classes as retirement approaches. Aim: The purpose of this study is to compare the performance of life cycle funds with balanced funds to determine whether either dominates the other. The study compares balanced and life cycle funds with similar starting asset allocations as well as those where the starting asset allocations differ. Setting: The study has a South African focus and constructs funds using historical data for the main local asset classes; that is, equity, fixed income and cash, as well as a proxy for foreign equity covering the period 1986–2013. Method: The study makes use of Monte Carlo simulations and bootstrap with replacement, and compares the simulated outcomes using stochastic dominance as decision-making criteria. Results: The results indicate that life cycle funds fail to dominate balanced funds by first-order or almost stochastic dominance when funds have a similar starting asset allocation. It is noteworthy that there are instances where the opposite is true, that is, balanced funds dominate life cycle funds. These results highlight that while the life cycle funds provide more downside protection, they significantly suppress the upside potential compared to balanced funds. When the starting asset allocations of the balanced and life cycle funds differ, the stochastic dominance results are inconsistent as to the efficacy of the life cycle fund strategies considered. Conclusion: The study shows that whether one fund is likely to dominate the other is strongly dependent on the underlying asset allocation strategies of the funds

Analysis within the systems development life-cycle

CERN Document Server

Rock-Evans, Rosemary

1987-01-01

Analysis within the Systems Development Life-Cycle: Book 1, Data Analysis-The Deliverables provides a comprehensive treatment of data analysis within the systems development life-cycle and all the deliverables that need to be collected in analysis. The purpose of deliverables is explained and a number of alternative ways of collecting them are discussed. This book is comprised of five chapters and begins with an overview of what """"analysis"""" actually means, with particular reference to tasks such as hardware planning and software evaluation and where they fit into the overall cycle. The ne

Combining turbine blade-strike and life cycle models to assess mitigation strategies for fish passing dams

Energy Technology Data Exchange (ETDEWEB)

Ferguson, J.W. [National Marine Fisheries Service, Seattle, WA (United States). Fish Ecology Div.; Swedish Univ. of Agricultural Sciences, Umea (Sweden). Dept. of Wildlife, Fish and Environmental Studies; Ploskey, G.R. [Battelle-Pacific Northwest National Laboratory, Richland, WA (United States); Zabel, R.W. [National Marine Fisheries Service, Seattle, WA (United States). Fish Ecology Div.; Lundqvist, H. [Swedish Univ. of Agricultural Sciences, Umea (Sweden). Dept. of Wildlife, Fish and Environmental Studies

2008-08-15

Many diadromous and resident fish populations migrate within riverine, freshwater, and marine habitats that have been altered by human activities. This paper developed a tool designed to analyze the effects of dams on fish populations. The model combined a blade-strike model of a hydroelectric turbine and a life cycle model in order to generate point estimates of mortality and incorporate dam passage impacts. The modelling tool was used to study populations of Atlantic salmon and sea trout populations in Sweden which were depressed due to damming, dredging, pollution, and siltation of the rivers. The downstream migrating fish in the rivers passed through a single dam and power station containing Kaplan and Francis turbines. A blade-strike model was developed as the primary mechanism of mortality for the fish. The mortality of juvenile and adult fish and mortality rates from blade-strikes were then entered into salmon life cycle models that incorporated life history variability in age of reproduction and spawning activities. The life cycle model populations in the river were then modelled in hypothetical scenarios. Results of the scenarios were compared with effects from the blade-strike mortality results. Results of the study showed that increases in the number of female salmon escaping above the dam after 20 years was significantly higher when both juveniles and adult fish populations were protected. The model will be used to evaluate strategies designed to conserve fish populations impacted by dams. 49 refs., 9 tabs., 6 figs.

Combining turbine blade-strike and life cycle models to assess mitigation strategies for fish passing dams

International Nuclear Information System (INIS)

Ferguson, J.W.; Zabel, R.W.; Lundqvist, H.

2008-01-01

Many diadromous and resident fish populations migrate within riverine, freshwater, and marine habitats that have been altered by human activities. This paper developed a tool designed to analyze the effects of dams on fish populations. The model combined a blade-strike model of a hydroelectric turbine and a life cycle model in order to generate point estimates of mortality and incorporate dam passage impacts. The modelling tool was used to study populations of Atlantic salmon and sea trout populations in Sweden which were depressed due to damming, dredging, pollution, and siltation of the rivers. The downstream migrating fish in the rivers passed through a single dam and power station containing Kaplan and Francis turbines. A blade-strike model was developed as the primary mechanism of mortality for the fish. The mortality of juvenile and adult fish and mortality rates from blade-strikes were then entered into salmon life cycle models that incorporated life history variability in age of reproduction and spawning activities. The life cycle model populations in the river were then modelled in hypothetical scenarios. Results of the scenarios were compared with effects from the blade-strike mortality results. Results of the study showed that increases in the number of female salmon escaping above the dam after 20 years was significantly higher when both juveniles and adult fish populations were protected. The model will be used to evaluate strategies designed to conserve fish populations impacted by dams. 49 refs., 9 tabs., 6 figs

19th CIRP Conference on Life Cycle Engineering

CERN Document Server

Linke, Barbara

2012-01-01

The 19th CIRP Conference on Life Cycle Engineering continues a strong tradition of scientific meetings in the areas of sustainability and engineering within the community of the International Academy for Production Engineering (CIRP). The focus of the conference is to review and discuss the current developments, technology improvements, and future research directions that will allow engineers to help create green businesses and industries that are both socially responsible and economically successful.  The symposium covers a variety of relevant topics within life cycle engineering including Businesses and Organizations, Case Studies, End of Life Management, Life Cycle Design, Machine Tool Technologies for Sustainability, Manufacturing Processes, Manufacturing Systems, Methods and Tools for Sustainability, Social Sustainability, and Supply Chain Management.

Effective Integration of Life Cycle Engineering in Education

NARCIS (Netherlands)

Oude Luttikhuis, Ellen; Toxopeus, Marten E.; Lutters, Diederick

2015-01-01

In practice, applying life cycle engineering in product design and development requires an integrated approach, because of the many stakeholders and variables (e.g. cost, environmental impact, energy, safety, quality) involved in a complete product life cycle. In educating young engineers, the same

The s48/45 six-cysteine proteins: mediators of interaction throughout the Plasmodium life cycle.

Science.gov (United States)

Arredondo, Silvia A; Kappe, Stefan H I

2017-06-01

During their life cycle Plasmodium parasites rely upon an arsenal of proteins that establish key interactions with the host and vector, and between the parasite sexual stages, with the purpose of ensuring infection, reproduction and proliferation. Among these is a group of secreted or membrane-anchored proteins known as the six-cysteine (6-cys) family. This is a small but important family with only 14 members thus far identified, each stage-specifically expressed during the parasite life cycle. 6-cys proteins often localise at the parasite surface or interface with the host and vector, and are conserved in different Plasmodium species. The unifying feature of the family is the s48/45 domain, presumably involved in adhesion and structurally related to Ephrins, the ligands of Eph receptors. The most prominent s48/45 members are currently under functional investigation and are being pursued as vaccine candidates. In this review, we examine what is known about the 6-cys family, their structure and function, and discuss future research directions. Copyright © 2016 Australian Society for Parasitology. Published by Elsevier Ltd. All rights reserved.

When Product Life Cycle Meets Customer Activity Cycle

DEFF Research Database (Denmark)

Tan, Adrian Ronald

2007-01-01

Manufacturing companies have traditionally focused their efforts on designing, developing and producing products to offer on the market. Today global competition and demands for greater company responsibility of products throughout their entire life cycle are driving manufacturing companies to sh...

Implementing Life Cycle Assessment in Product development

DEFF Research Database (Denmark)

Bhander, Gurbakhash Singh

2003-01-01

The overall aim of the paper is to provide an understanding of the environmental issues involved in the early stages of product development and the capacity of life cycle assessment techniques to address these issues. The paper aims to outline the problems for the designer in evaluating the envir......The overall aim of the paper is to provide an understanding of the environmental issues involved in the early stages of product development and the capacity of life cycle assessment techniques to address these issues. The paper aims to outline the problems for the designer in evaluating......, and of the opportunities for introducing environmental criteria in the design process through meeting the information requirements of the designer on the different life cycle stages, producing an in-depth understanding of the attitudes of practitioners among product developers to the subject area, and an understanding...... of possible future directions for product development. An Environmentally Conscious Design method is introduced and trade-offs are presented between design degrees of freedom and environmental solutions. Life cycle design frameworks and strategies are addressed. The paper collects experiences and ideas around...

Optimizing the data life cycle

Energy Technology Data Exchange (ETDEWEB)

Schwarz, Kilian [GSI, Planckstr. 1, 64291 Darmstadt (Germany); Jung, Christopher [KIT, Kaiserstrasse 12, 76131 Karlsruhe (Germany)

2013-07-01

Today, data play a central role in most fields of Science. In recent years, the amount of data from experiment, observation, and simulation has increased rapidly and the data complexity has grown. Also, communities and shared storage have become geographically more distributed. Therefore, methods and techniques applied for scientific data need to be revised and partially be replaced, while keeping the community-specific needs in focus. The Helmholtz Portfolio Extension ''Large Scale Data Management and Analysis'' (LSDMA) focuses on the optimization of the data life cycle in different research areas. In its five Data Life Cycle Labs (DLCLs), data experts closely collaborate with the communities in joint research and development to optimize the respective data life cycle. In addition, the Data Services Integration Team provides data analysis tools and services which are common to several DLCLs. This presentation describes the various activities within LSDMA and focuses on the work done in the DLCL ''Structure of Matter''. The main topics of this DLCL are the support for the international projects FAIR (Facility for Anti Proton and Ion Research) which will evolve around GSI in Darmstadt and the European XFEL and PETRA III at DESY in Hamburg.

Computer Software for Life Cycle Cost.

Science.gov (United States)

1987-04-01

34 111. 1111I .25 IL4 jj 16 MICROCOPY RESOLUTION TEST CHART hut FILE C AIR CoMMNAMN STFF COLLG STUJDET PORTO i COMpUTER SOFTWARE FOR LIFE CYCLE CO879...obsolete), physical life (utility before physically wearing out), or application life (utility in a given function)." (7:5) The costs are usually

Life Cycle Greenhouse Gas Emissions from Solar Photovoltaics (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2012-11-01

The National Renewable Energy Laboratory (NREL) recently led the Life Cycle Assessment (LCA) Harmonization Project, a study that helps to clarify inconsistent and conflicting life cycle GHG emission estimates in the published literature and provide more precise estimates of life cycle GHG emissions from PV systems.

LIFE CYCLE DESIGN OF AMORPHOUS SILICON PHOTOVOLTAIC MODULES

Science.gov (United States)

The life cycle design framework was applied to photovoltaic module design. The primary objective of this project was to develop and evaluate design metrics for assessing and guiding the Improvement of PV product systems. Two metrics were used to assess life cycle energy perform...

Caffeinated beverage intake and reproductive hormones among premenopausal women in the BioCycle Study.

Science.gov (United States)

Schliep, Karen C; Schisterman, Enrique F; Mumford, Sunni L; Pollack, Anna Z; Zhang, Cuilin; Ye, Aijun; Stanford, Joseph B; Hammoud, Ahmad O; Porucznik, Christina A; Wactawski-Wende, Jean

2012-02-01

Caffeinated beverages are widely consumed among women of reproductive age, but their association with reproductive hormones, and whether race modifies any such associations, is not well understood. We assessed the relation between caffeine and caffeinated beverage intake and reproductive hormones in healthy premenopausal women and evaluated the potential effect modification by race. Participants (n = 259) were followed for up to 2 menstrual cycles and provided fasting blood specimens for hormonal assessment at up to 8 visits per cycle and four 24-h dietary recalls per cycle. Weighted linear mixed models and nonlinear mixed models with harmonic terms were used to estimate associations between caffeine and hormone concentrations, adjusted for age, adiposity, physical activity, energy and alcohol intakes, and perceived stress. On the basis of a priori assumptions, an interaction between race and caffeine was tested, and stratified results are presented. Caffeine intake ≥200 mg/d was inversely associated with free estradiol concentrations among white women (β = -0.15; 95% CI: -0.26, -0.05) and positively associated among Asian women (β = 0.61; 95% CI: 0.31, 0.92). Caffeinated soda intake and green tea intake ≥1 cup/d (1 cup = 240 mL) were positively associated with free estradiol concentrations among all races: β = 0.14 (95% CI: 0.06, 0.22) and β = 0.26 (95% CI: 0.07, 0.45), respectively. Moderate consumption of caffeine was associated with reduced estradiol concentrations among white women, whereas caffeinated soda and green tea intakes were associated with increased estradiol concentrations among all races. Further research is warranted on the association between caffeine and caffeinated beverages and reproductive hormones and whether these relations differ by race.

Improving life-cycle cost management in the US. Army: analysis of the U.S. Army and Commercial Businesses life-cycle cost management.

OpenAIRE

White, Bradley A.

2001-01-01

The roles and responsibilities of the Army acquisition and logistics communities, as they pertain to the life-cycle management, are undergoing fundamental change. The early identification and total control of life-cycle cost, in particular operations and sustainment costs which comprises as much as 70-80% of a systems total life-cycle cost, is a high priority for the Army. The basis of this change is adoption of commercial best practices to support the Army's goal to organize. tram. equip, an...

Development of an Enhanced Generic Data Mining Life Cycle (DMLC)

OpenAIRE

Hofmann, Markus; Tierney, Brendan

2017-01-01

Data mining projects are complex and have a high failure rate. In order to improve project management and success rates of such projects a life cycle is vital to the overall success of the project. This paper reports on a research project that was concerned with the life cycle development for large scale data mining projects. The paper provides a detailed view of the design and development of a generic data mining life cycle called DMLC. The life cycle aims to support all members of data mini...

Reproductive success and failure: the role of winter body mass in reproductive allocation in Norwegian moose.

Science.gov (United States)

Milner, Jos M; van Beest, Floris M; Solberg, Erling J; Storaas, Torstein

2013-08-01

A life history strategy that favours somatic growth over reproduction is well known for long-lived iteroparous species, especially in unpredictable environments. Risk-sensitive female reproductive allocation can be achieved by a reduced reproductive effort at conception, or the subsequent adjustment of investment during gestation or lactation in response to unexpected environmental conditions or resource availability. We investigated the relative importance of reduced investment at conception compared with later in the reproductive cycle (i.e. prenatal, perinatal or neonatal mortality) in explaining reproductive failure in two high-density moose (Alces alces) populations in southern Norway. We followed 65 multiparous, global positioning system (GPS)-collared females throughout the reproductive cycle and focused on the role of maternal nutrition during gestation in determining reproductive success using a quasi-experimental approach to manipulate winter forage availability. Pregnancy rates in early winter were normal (≥0.8) in all years while spring calving rates ranged from 0.4 to 0.83, with prenatal mortality accounting for most of the difference. Further losses over summer reduced autumn recruitment rates to 0.23-0.69, despite negligible predation. Over-winter mass loss explained variation in both spring calving and autumn recruitment success better than absolute body mass in early or late winter. Although pregnancy was related to body mass in early winter, overall reproductive success was unrelated to pre-winter body condition. We therefore concluded that reproductive success was limited by winter nutritional conditions. However, we could not determine whether the observed reproductive allocation adjustment was a bet-hedging strategy to maximise reproduction without compromising survival or whether females were simply unable to invest more resources in their offspring.

The circle of life: A cross-cultural comparison of children's attribution of life-cycle traits.

Science.gov (United States)

Burdett, Emily R R; Barrett, Justin L

2016-06-01

Do children attribute mortality and other life-cycle traits to all minded beings? The present study examined whether culture influences young children's ability to conceptualize and differentiate human beings from supernatural beings (such as God) in terms of life-cycle traits. Three-to-5-year-old Israeli and British children were questioned whether their mother, a friend, and God would be subject to various life-cycle processes: Birth, death, ageing, existence/longevity, and parentage. Children did not anthropomorphize but differentiated among human and supernatural beings, attributing life-cycle traits to humans, but not to God. Although 3-year-olds differentiated significantly among agents, 5-year-olds attributed correct life-cycle traits more consistently than younger children. The results also indicated some cross-cultural variation in these attributions. Implications for biological conceptual development are discussed. © 2015 The British Psychological Society.

Life cycle management and assessment: approaches and visions towards sustainable manufacturing

DEFF Research Database (Denmark)

Westkämper, Engelbert; Alting, Leo; Arndt, Günther

2000-01-01

. The goal of this approach is to protect resources and maximize effectiveness by means of life cycle assessment, product data management, technical support and, last but not least, life cycle costing. This paper shows the existing approaches of LCM and discusses their prospects and further development....... concepts are required, new regulations have been passed or consumer values are changing, the differences between business areas are disappearing. Life cycle management (LCM) considers the product life cycle as a whole and optimizes the interaction of product design, manufacturing and life cycle activities...

20th CIRP International Conference on Life Cycle Engineering

CERN Document Server

Song, Bin; Ong, Soh-Khim

2013-01-01

This edited volume presents the proceedings of the 20th CIRP LCE Conference, which cover various areas in life cycle engineering such as life cycle design, end-of-life management, manufacturing processes, manufacturing systems, methods and tools for sustainability, social sustainability, supply chain management, remanufacturing, etc.

Total Product Life Cycle (TPLC)

Data.gov (United States)

U.S. Department of Health & Human Services — The Total Product Life Cycle (TPLC) database integrates premarket and postmarket data about medical devices. It includes information pulled from CDRH databases...

FLOWERING LOCUS C (FLC) regulates development pathways throughout the life cycle of Arabidopsis.

Science.gov (United States)

Deng, Weiwei; Ying, Hua; Helliwell, Chris A; Taylor, Jennifer M; Peacock, W James; Dennis, Elizabeth S

2011-04-19

FLOWERING LOCUS C (FLC) has a key role in the timing of the initiation of flowering in Arabidopsis. FLC binds and represses two genes that promote flowering, FT and SOC1. We show that FLC binds to many other genes, indicating that it has regulatory roles other than the repression of flowering. We identified 505 FLC binding sites, mostly located in the promoter regions of genes and containing at least one CArG box, the motif known to be associated with MADS-box proteins such as FLC. We examined 40 of the target genes, and 20 showed increased transcript levels in an flc mutant compared with the wild type. Five genes showed decreased expression in the mutant, indicating that FLC binding can result in either transcriptional repression or activation. The genes we identified as FLC targets are involved in developmental pathways throughout the life history of the plant, many of which are associated with reproductive development. FLC is also involved in vegetative development, as evidenced by its binding to SPL15, delaying the progression from juvenile to adult phase. Some of the FLC target genes are also bound by two other MADS-box proteins, AP1 and SEP3, suggesting that MADS-box genes may operate in a network of control at different stages of the life cycle, many ultimately contributing to the development of the reproductive phase of the plant.

Environmental effects on growth, reproduction, and life-history traits of loggerhead turtles

NARCIS (Netherlands)

Marn, Nina; Jusup, Marko; Legović, Tarzan; Kooijman, S. A.L.M.; Klanjšček, Tin

2017-01-01

Understanding the relationship between the environmental conditions and life-history traits (such as growth, reproduction, and size at specific life stages) is important for understanding the population dynamics of a species and for constructing adaptable, relevant, and efficient conservation

Residential Preferences and Moving Behavior: A Family Life Cycle Analysis.

Science.gov (United States)

McAuley, William J.; Nutty, Cheri L.

The relationship of family life cycle changes to housing preferences and residential mobility is examined. Two residential decision-making issues are explored in detail--how family life cycle stages influence what people view as important to their choice of residential setting and what individuals at different family life cycle stages view as the…

Methodologies for Social Life Cycle Assessment

DEFF Research Database (Denmark)

Jørgensen, Andreas; Le Bocq, Agathe; Nazakina, Liudmila

2008-01-01

Goal, Scope and Background. In recent years several different approaches towards Social Life Cycle Assessment (SLCA) have been developed. The purpose of this review is to compare these approaches in order to highlight methodological differences and general shortcomings. SLCA has several similarit......Goal, Scope and Background. In recent years several different approaches towards Social Life Cycle Assessment (SLCA) have been developed. The purpose of this review is to compare these approaches in order to highlight methodological differences and general shortcomings. SLCA has several...... similarities with other social assessment tools, but in order to limit the review, only claims to address social impacts from an LCA-like framework is considered. Main Features. The review is to a large extent based on conference proceedings and reports of which some are not easily accessible, since very...... stage in the product life cycle. Another very important difference among the proposals is their position towards the use of generic data. Several of the proposals argue that social impacts are connected to the conduct of the company leading to the conclusion that each individual company in the product...

Integrated corporate structure life cycle management modeling and organization

OpenAIRE

Naumenko, M.; Morozova, L.

2011-01-01

Integrated business structure presented as complementary pool of its participants skills. The methodical approach to integrated business structure life cycle modeling proposed. Recommendations of enterprises life cycles stages correlate are submitted.

Comparative life cycle assessment and life cycle costing of lodging in the Himalaya

NARCIS (Netherlands)

Bhochhibhoya, Silu; Pizzol, Massimo; Achten, Wouter M.J.; Maskey, Ramesh Kumar; Zanetti, Michela; Cavalli, Raffaele

2017-01-01

Purpose: The main aim of the study is to assess the environmental and economic impacts of the lodging sector located in the Himalayan region of Nepal, from a life cycle perspective. The assessment should support decision making in technology and material selection for minimal environmental and

Application of Life Cycle Assessment on Electronic Waste Management: A Review

Science.gov (United States)

Xue, Mianqiang; Xu, Zhenming

2017-04-01

Electronic waste is a rich source of both valuable materials and toxic substances. Management of electronic waste is one of the biggest challenges of current worldwide concern. As an effective and prevailing environmental management tool, life cycle assessment can evaluate the environmental performance of electronic waste management activities. Quite a few scientific literatures reporting life cycle assessment of electronic waste management with significant outcomes have been recently published. This paper reviewed the trends, characteristics, research gaps, and challenges of these studies providing detailed information for practitioners involved in electronic waste management. The results showed that life cycle assessment studies were most carried out in Europe, followed by Asia and North America. The research subject of the studies mainly includes monitors, waste printed circuit boards, mobile phones, computers, printers, batteries, toys, dishwashers, and light-emitting diodes. CML was the most widely used life cycle impact assessment method in life cycle assessment studies on electronic waste management, followed by EI99. Furthermore, 40% of the reviewed studies combined with other environmental tools, including life cycle cost, material flow analysis, multi-criteria decision analysis, emergy analysis, and hazard assessment which came to more comprehensive conclusions from different aspects. The research gaps and challenges including uneven distribution of life cycle assessment studies, life cycle impact assessment methods selection, comparison of the results, and uncertainty of the life cycle assessment studies were examined. Although life cycle assessment of electronic waste management facing challenges, their results will play more and more important role in electronic waste management practices.

A resource guide to nuclear plant life-cycle management

International Nuclear Information System (INIS)

Negin, C.A.; Klein, D.J.

1993-11-01

Forecasting the useful economic life of a nuclear unit and addressing the complementary issue of license renewal, both key elements of life cycle management, are complex undertakings. This guide is a resource document emphasizing the technical elements of life cycle management (LCM) with focus on the determination of adequate maintenance programs and the identification of data and records necessary to support them. Information on other life cycle management issues, such as license renewal regulation, is also provided. Because of the volume of information required for LCM evaluations and the need for periodic updating, this Guide is presented as an updatable ''electronic book.''

Life cycle management and assessment: approaches and visions towards sustainable manufacturing

DEFF Research Database (Denmark)

Westkämper, Engelbert; Alting, Leo; Arndt, Günther

2001-01-01

and optimizes the interaction of product design, manufacturing and life cycle activities. The goal of this approach is to protect resources and maximize effectiveness by means of life cycle assessment, product data management, technical support and, last but not least, life cycle costing. This paper shows....... Economically successful business areas can also be explored. Whether new service concepts are required, new regulations have been passed or consumer values are changing, the differences between business areas are disappearing. Life cycle management (LCM) considers the product life cycle as a whole...... the existing approaches of LCM and discusses their prospects and further development....

Risk informed life cycle plant design

International Nuclear Information System (INIS)

Hill, Ralph S. III; Nutt, Mark M.

2003-01-01

Many facility life cycle activities including design, construction, fabrication, inspection and maintenance are evolving from a deterministic to a risk-informed basis. The risk informed approach uses probabilistic methods to evaluate the contribution of individual system components to total system performance. Total system performance considers both safety and cost considerations including system failure, reliability, and availability. By necessity, a risk-informed approach considers both the component's life cycle and the life cycle of the system. In the nuclear industry, risk-informed approaches, namely probabilistic risk assessment (PRA) or probabilistic safety assessment (PSA), have become a standard tool used to evaluate the safety of nuclear power plants. Recent studies pertaining to advanced reactor development have indicated that these new power plants must provide enhanced safety over existing nuclear facilities and be cost-competitive with other energy sources. Risk-informed approaches, beyond traditional PRA, offer the opportunity to optimize design while considering the total life cycle of the plant in order to realize these goals. The use of risk-informed design approaches in the nuclear industry is only beginning, with recent promulgation of risk-informed regulations and proposals for risk-informed codes. This paper briefly summarizes the current state of affairs regarding the use of risk-informed approaches in design. Key points to fully realize the benefit of applying a risk-informed approach to nuclear power plant design are then presented. These points are equally applicable to non-nuclear facilities where optimization for cost competitiveness and/or safety is desired. (author)

Life Cycle Thinking in Impact Assessment

DEFF Research Database (Denmark)

Bidstrup, Morten

2015-01-01

It has been advocated that life cycle thinking (LCT) should be applied in impact assessment (IA) to a greater extent, since some development proposals pose a risk of significant impacts throughout the interconnected activities of product systems. Multiple authors have proposed the usage of life...

Evaluation of life-cycle air emission factors of freight transportation.

Science.gov (United States)

Facanha, Cristiano; Horvath, Arpad

2007-10-15

Life-cycle air emission factors associated with road, rail, and air transportation of freight in the United States are analyzed. All life-cycle phases of vehicles, infrastructure, and fuels are accounted for in a hybrid life-cycle assessment (LCA). It includes not only fuel combustion, but also emissions from vehicle manufacturing, maintenance, and end of life, infrastructure construction, operation, maintenance, and end of life, and petroleum exploration, refining, and fuel distribution. Results indicate that total life-cycle emissions of freight transportation modes are underestimated if only tailpipe emissions are accounted for. In the case of CO2 and NOx, tailpipe emissions underestimate total emissions by up to 38%, depending on the mode. Total life-cycle emissions of CO and SO2 are up to seven times higher than tailpipe emissions. Sensitivity analysis considers the effects of vehicle type, geography, and mode efficiency on the final results. Policy implications of this analysis are also discussed. For example, while it is widely assumed that currently proposed regulations will result in substantial reductions in emissions, we find that this is true for NOx, emissions, because fuel combustion is the main cause, and to a lesser extent for SO2, but not for PM10 emissions, which are significantly affected by the other life-cycle phases.

Rules of Thumb in Life-Cycle Saving Decisions

OpenAIRE

Winter, Joachim; Schlafmann, Kathrin; Rodepeter, Ralf

2011-01-01

We analyse life-cycle saving decisions when households use simple heuristics, or rules of thumb, rather than solve the underlying intertemporal optimization problem. We simulate life-cycle saving decisions using three simple rules and compute utility losses relative to the solution of the optimization problem. Our simulations suggest that utility losses induced by following simple decision rules are relatively low. Moreover, the two main saving motives re ected by the canonical life-cyc...

Life Cycle Inventory Analysis

DEFF Research Database (Denmark)

Bjørn, Anders; Moltesen, Andreas; Laurent, Alexis

2018-01-01

of different sources. The output is a compiled inventory of elementary flows that is used as basis of the subsequent life cycle impact assessment phase. This chapter teaches how to carry out this task through six steps: (1) identifying processes for the LCI model of the product system; (2) planning...

Management system and organizational life cycle: A qualitative study

OpenAIRE

Selma Zone Fekih Ahmed

2013-01-01

This research deals with the importance of the components of the management system according to the phases of organizational life cycle. The goal of our research is to provide the theoretical reflection on the life cycle of the organization and to shed light on the components of the management system for each phase. The conceptual analysis shows that the management system is made up of its three components: ethics, mode of functioning and procedure of regulation. The organizational life cycle...

Designer and Constructor Practices to Ensure Life Cycle Performance

National Research Council Canada - National Science Library

Shelton, Joelle

1998-01-01

.... Many of these attempts focus on reducing costs and improving functionality, such as life cycle cost analysis and value engineering, while others, such as design-build, focus on specific phases of the life cycle...

Fast–slow continuum and reproductive strategies structure plant life-history variation worldwide

NARCIS (Netherlands)

Salguero-Gómez, Roberto; Jones, Owen R.; Jongejans, Eelke; Blomberg, Simon; Hodgson, D.; Zuidema, P.A.; Kroon, de Hans; Buckley, Yvonne M.

2016-01-01

The identification of patterns in life-history strategies across the tree of life is essential to our prediction of population persistence, extinction, and diversification. Plants exhibit a wide range of patterns of longevity, growth, and reproduction, but the general determinants of this enormous

Immunocontraception in wild horses (Equus caballus extends reproductive cycling beyond the normal breeding season.

Directory of Open Access Journals (Sweden)

Cassandra M V Nuñez

Full Text Available BACKGROUND: Although the physiological effects of immunocontraceptive treatment with porcine zona pellucida (PZP have been well studied, little is known about PZP's effects on the scheduling of reproductive cycling. Recent behavioral research has suggested that recipients of PZP extend the receptive breeding period into what is normally the non-breeding season. METHODOLOGY/PRINCIPAL FINDINGS: To determine if this is the case, we compiled foaling data from wild horses (Equus caballus living on Shackleford Banks, North Carolina for 4 years pre- and 8 years post-contraception management with PZP (pre-contraception, n = 65 births from 45 mares; post-contraception, n = 97 births from 46 mares. Gestation lasts approximately 11-12 months in wild horses, placing conception at approximately 11.5 months prior to birth. Since the contraception program began in January 2000, foaling has occurred over a significantly broader range than it had before the contraception program. Foaling in PZP recipients (n = 45 births from 27 mares has consistently occurred over a broader range than has foaling in non-recipients (n = 52 births from 19 mares. In addition, current recipients of PZP foaled later in the year than did prior recipient and non-recipient mares. Females receiving more consecutive PZP applications gave birth later in the season than did females receiving fewer applications. Finally, the efficacy of PZP declined with increasing consecutive applications before reaching 100% after five consecutive applications. CONCLUSIONS/SIGNIFICANCE: For a gregarious species such as the horse, the extension of reproductive cycling into the fall months has important social consequences, including decreased group stability and the extension of male reproductive behavior. In addition, reproductive cycling into the fall months could have long-term effects on foal survivorship. Managers should consider these factors before enacting immunocontraceptive programs in new

Social and seasonal influences on the reproductive cycle in female mandrills (Mandrillus sphinx).

Science.gov (United States)

Setchell, Joanna M; Wickings, E Jean

2004-09-01

We present 12 years of perineal swelling data for a semifree-ranging colony of mandrills (Mandrillus sphinx), and evaluate the influence of rank, parity, and seasonality on reproductive parameters. Female sexual swellings showed a seasonal pattern, with August the median month of ovulation. Overlapping periovulatory periods did not decrease the likelihood of conception. Females showed their first genital swelling at age 3.6 years (n = 28; range, 3.2-4.6 years), and higher-ranking females experienced their first swelling earlier than low-ranking females. Median postpartum amenorrhea (PPA) duration was 208 days (n = 92; range, 74-538 days). PPA was longer in primiparous females than in multiparous females, but PPA duration was unrelated to female rank. Median follicular phase duration was 24 days for the first cycle after parturition (n = 84; range, 12-40 days), shortening to 17 days in subsequent cycles (n = 55; range, 6-39 days). The follicular phase was longer in nulliparous females than in parous females, but was unrelated to female rank. Median cycle length (from one sexual swelling breakdown to the next) was 38 days (n = 57; range, 18-108 days). Eighty-seven percent of conceptions occurred within two cycles, and half of the nulliparous females conceived during their first swelling cycle. Lower-ranking females were more likely to require more cycles to conceive than higher-ranking females. The cycling phase was significantly longer in nulliparous females than in parous females, and was also significantly longer in lower-ranking females than in higher-ranking females. We discuss the influence of provisioning on female reproductive parameters, the influence of parity and rank on the different phases of the interbirth interval, and the evolution of long and variable follicular phases in mandrills. Copyright 2004 Wiley-Liss, Inc.

Life cycle reliability assessment of new products—A Bayesian model updating approach

International Nuclear Information System (INIS)

Peng, Weiwen; Huang, Hong-Zhong; Li, Yanfeng; Zuo, Ming J.; Xie, Min

2013-01-01

The rapidly increasing pace and continuously evolving reliability requirements of new products have made life cycle reliability assessment of new products an imperative yet difficult work. While much work has been done to separately estimate reliability of new products in specific stages, a gap exists in carrying out life cycle reliability assessment throughout all life cycle stages. We present a Bayesian model updating approach (BMUA) for life cycle reliability assessment of new products. Novel features of this approach are the development of Bayesian information toolkits by separately including “reliability improvement factor” and “information fusion factor”, which allow the integration of subjective information in a specific life cycle stage and the transition of integrated information between adjacent life cycle stages. They lead to the unique characteristics of the BMUA in which information generated throughout life cycle stages are integrated coherently. To illustrate the approach, an application to the life cycle reliability assessment of a newly developed Gantry Machining Center is shown

Future of lignite resources: a life cycle analysis.

Science.gov (United States)

Wang, Qingsong; Liu, Wei; Yuan, Xueliang; Zheng, Xiaoning; Zuo, Jian

2016-12-01

Lignite is a low-quality energy source which accounts for 13 % of China's coal reserves. It is imperative to improve the quality of lignite for large-scale utilization. To further explore and analyze the influence of various key processes on the environment and economic costs, a lignite drying and compression technology is evaluated using an integrated approach of life cycle assessment and life cycle costs. Results showed that lignite mining, direct air emissions, and electricity consumption have most significant impacts on the environment. An integrated evaluation of life cycle assessment and life cycle costs showed that the most significant contributor to the environmental impacts and economic costs was the lignite mining process. The impact of transportation and wastewater treatment process on the environment and economic costs was small enough to be ignored. Critical factors were identified for reducing the environmental and economic impacts of lignite drying and compression technology. These findings provide useful inputs for both industrial practice and policy making for exploitation, processing, and utilization of lignite resources.

Sustainable Nanotechnology: Through Green Methods and Life-Cycle Thinking

Directory of Open Access Journals (Sweden)

Rapinder Sawhney

2010-10-01

Full Text Available Citing the myriad applications of nanotechnology, this paper emphasizes the need to conduct “life cycle” based assessments as early in the new product development process as possible, for a better understanding of the potential environmental and human health consequences of nanomaterials over the entire life cycle of a nano-enabled product. The importance of this reasoning is further reinforced through an illustrative case study on automotive exterior body panels, which shows that the perceived environmental benefits of nano-based products in the Use stage may not adequately represent the complete picture, without examining the impacts in the other life cycle stages, particularly Materials Processing and Manufacturing. Nanomanufacturing methods often have associated environmental and human health impacts, which must be kept in perspective when evaluating nanoproducts for their “greenness.” Incorporating life-cycle thinking for making informed decisions at the product design stage, combining life cycle and risk analysis, using sustainable manufacturing practices, and employing green chemistry alternatives are seen as possible solutions.

An ideal sealed source life-cycle

International Nuclear Information System (INIS)

Tompkins, Joseph Andrew

2009-01-01

we have today. This regulation created a new regulatory framework seen as promising at the time. However, now they recognize that, despite the good intentions, the NIJWP/85 has not solved any source disposition problems. The answer to these sealed source disposition problems is to adopt a philosophy to correct these regulatory issues, determine an interim solution, execute that solution until there is a minimal backlog of sources to deal with, and then let the mechanisms they have created solve this problem into the foreseeable future. The primary philosophical tenet of the ideal sealed source life cycle follows. You do not allow the creation (or importation) of any source whose use cannot be justified, which cannot be affordably shipped, or that does not have a well-delinated and affordable disposition pathway. The path forward dictates that we fix the problem by embracing the Ideal Source Life cycle. In figure 1, we can see some of the elements of the ideal source life cycle. The life cycle is broken down into four portions, manufacture, use, consolidation, and disposition. These four arbitrary elements allow them to focus on the ideal life cycle phases that every source should go through between manufacture and final disposition. As we examine the various phases of the sealed source life cycle, they pick specific examples and explore the adoption of the ideal life cycle model.

Implementing Life Cycle Assessment in systems development

DEFF Research Database (Denmark)

Bhander, Gurbakhash Singh; Hauschild, Michael Zwicky; McAloone, Timothy Charles

2003-01-01

and the rapid changes in markets for many products. The overall aim of the paper is to provide an understanding of the environmental issues involved in the early stages of product development and the capacity of life cycle assessment techniques to address these issues. The paper aims to outline the problems...... for the designer in evaluating the environmental benignity of the product from the outset and to provide the designer with a framework for decision support based on the performance evaluation at different stages of the design process. The overall aim of this paper is to produce an in-depth understanding...... of possibilities which can be introduced in the design stage compared to the other life cycle stages of the product system. The paper collects experiences and ideas around the state-of-the-art in eco-design, from literature and personal experience and further provides eco-design life cycle assessment strategies...

Expression of progesterone receptor membrane component-1 in bovine reproductive system during estrous cycle

Directory of Open Access Journals (Sweden)

A.M. Luciano

2011-09-01

Full Text Available Several reports suggest the participation of progesterone receptor membrane component 1 (PGRMC1 in progesterone signaling in the reproductive system. This study aimed at investigating the presence and localization of PGRMC1 in bovine ovary, oviduct and uterus, during the follicular and luteal phases of the estrous cycle. In the ovary, PGRMC1 has been detected in surface germinal epithelium, granulosa cells, theca cells and in the germinal vesicle of the oocytesat all stages of folliculogenesis. In the corpus luteum the expression of PGRMC1 was influenced by the stage of the estrous cycle. In the oviducts and in the uterus horns, PGRMC1 was immunolocalized in the luminal epithelium, in the muscle layer cells and in the endothelial cells. In the uterus, PGRMC1 was intensely localized also in the glandular endometrium. However, in the oviducts and in the uterus horns, the localization of PGRMC1 was independent on the stage of the estrous cycle and on whether evaluating the ipsilateral or the contralateral organ. In conclusion, the present immunohistochemical study showed that PGRMC1 is located in various compartments of the bovine female reproductive organs. With the exception of the corpora lutea, PGRMC1 localization showed similar pattern during different stage of the estrous cycle.

Life cycle greenhouse gas emissions of anesthetic drugs.

Science.gov (United States)

Sherman, Jodi; Le, Cathy; Lamers, Vanessa; Eckelman, Matthew

2012-05-01

Anesthesiologists must consider the entire life cycle of drugs in order to include environmental impacts into clinical decisions. In the present study we used life cycle assessment to examine the climate change impacts of 5 anesthetic drugs: sevoflurane, desflurane, isoflurane, nitrous oxide, and propofol. A full cradle-to-grave approach was used, encompassing resource extraction, drug manufacturing, transport to health care facilities, drug delivery to the patient, and disposal or emission to the environment. At each stage of the life cycle, energy, material inputs, and emissions were considered, as well as use-specific impacts of each drug. The 4 inhalation anesthetics are greenhouse gases (GHGs), and so life cycle GHG emissions include waste anesthetic gases vented to the atmosphere and emissions (largely carbon dioxide) that arise from other life cycle stages. Desflurane accounts for the largest life cycle GHG impact among the anesthetic drugs considered here: 15 times that of isoflurane and 20 times that of sevoflurane on a per MAC-hour basis when administered in an O(2)/air admixture. GHG emissions increase significantly for all drugs when administered in an N(2)O/O(2) admixture. For all of the inhalation anesthetics, GHG impacts are dominated by uncontrolled emissions of waste anesthetic gases. GHG impacts of propofol are comparatively quite small, nearly 4 orders of magnitude lower than those of desflurane or nitrous oxide. Unlike the inhaled drugs, the GHG impacts of propofol primarily stem from the electricity required for the syringe pump and not from drug production or direct release to the environment. Our results reiterate previous published data on the GHG effects of these inhaled drugs, while providing a life cycle context. There are several practical environmental impact mitigation strategies. Desflurane and nitrous oxide should be restricted to cases where they may reduce morbidity and mortality over alternative drugs. Clinicians should avoid

Software Safety Life cycle and Method of POSAFE-Q System

International Nuclear Information System (INIS)

Lee, Jang-Soo; Kwon, Kee-Choon

2006-01-01

This paper describes the relationship between the overall safety life cycle and the software safety life cycle during the development of the software based safety systems of Nuclear Power Plants. This includes the design and evaluation activities of components as well as the system. The paper also compares the safety life cycle and planning activities defined in IEC 61508 with those in IEC 60880, IEEE 7-4.3.2, and IEEE 1228. Using the KNICS project as an example, software safety life cycle and safety analysis methods applied to the POSAFE-Q are demonstrated. KNICS software safety life cycle is described by comparing to the software development, testing, and safety analysis process with international standards. The safety assessment of the software for POSAFE-Q is a joint Korean German project. The assessment methods applied in the project and the experiences gained from this project are presented

Ecology and Life Cycle Patterns of Echinococcus Species.

Science.gov (United States)

Romig, T; Deplazes, P; Jenkins, D; Giraudoux, P; Massolo, A; Craig, P S; Wassermann, M; Takahashi, K; de la Rue, M

2017-01-01

The genus Echinococcus is composed of eight generally recognized species and one genotypic cluster (Echinococcus canadensis cluster) that may in future be resolved into one to three species. For each species, we review existing information on transmission routes and life cycles in different geographical contexts and - where available - include basic biological information of parasites and hosts (e.g., susceptibility of host species). While some Echinococcus spp. are transmitted in life cycles that involve predominantly domestic animals (e.g., dog - livestock cycles), others are wildlife parasites that do or do not interact with domestic transmission. In many cases, life cycle patterns of the same parasite species differ according to geography. Simple life cycles contrast with transmission patterns that are highly complex, involving multihost systems that may include both domestic and wild mammals. Wildlife transmission may be primary or secondary, i.e., resulting from spillovers from domestic animals. For most of the species and regions, existing information does not yet permit a conclusive description of transmission systems. Such data, however, would be highly relevant, e.g., for anticipation of geographical changes of the presence and frequency of these parasites in a warming world, or for initiating evidence-based control strategies. Copyright © 2017 Elsevier Ltd. All rights reserved.

Life Cycle Engineering – from methodology to enterprise culture

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky; Alting, Leo; Poll, Christian

2003-01-01

As part of a sustainable development, the environmental efficiency of industry must increase by a factor four to ten. This engenders attention to the environmental impact of products and technical systems over their entire life cycle. The last decade has seen the development of a number of method......As part of a sustainable development, the environmental efficiency of industry must increase by a factor four to ten. This engenders attention to the environmental impact of products and technical systems over their entire life cycle. The last decade has seen the development of a number...... of methodologies and tools for life cycle assessment and development of more eco-efficient products, from complex to simplified, catering to the needs of especially small and medium-sized enterprizes. The tools and data are in place, but dissemination lacks behind. Propagation of life cycle thinking and life cycle...... engineering to larger parts of industry is attempted by strengthening the market pull through integrated product policy measures, and at the same time pushing through information activities, training and dissemination of tools. Experience hitherto shows that these forces are insufficient and that stronger...

Effect of Air Pollution on Menstrual Cycle Length-A Prognostic Factor of Women's Reproductive Health.

Science.gov (United States)

Merklinger-Gruchala, Anna; Jasienska, Grazyna; Kapiszewska, Maria

2017-07-20

Air pollution can influence women's reproductive health, specifically menstrual cycle characteristics, oocyte quality, and risk of miscarriage. The aim of the study was to assess whether air pollution can affect the length of the overall menstrual cycle and the length of its phases (follicular and luteal). Municipal ecological monitoring data was used to assess the air pollution exposure during the monitored menstrual cycle of each of 133 woman of reproductive age. Principal component analyses were used to group pollutants (PM 10 , SO₂, CO, and NO x ) to represent a source-related mixture. PM 10 and SO₂ assessed separately negatively affected the length of the luteal phase after standardization (b = -0.02; p = 0.03; b = -0.06; p = 0.02, respectively). Representing a fossil fuel combustion emission, they were also associated with luteal phase shortening (b = -0.32; p = 0.02). These pollutants did not affect the follicular phase length and overall cycle length, neither in single- nor in multi-pollutant models. CO and NO x assessed either separately or together as a traffic emission were not associated with overall cycle length or the length of cycle phases. Luteal phase shortening, a possible manifestation of luteal phase deficiency, can result from fossil fuel combustion. This suggests that air pollution may contribute to fertility problems in women.

Reproductive effort as an element of life strategy of Lythrum salicaria L. populations

Directory of Open Access Journals (Sweden)

Bożenna Czarnecka

2012-12-01

Full Text Available The aim of the study was to compare some life strategy traits of individuals of Purple Loosestrife Lythrum salicaria within three meadow populations existing under various habitat conditions. The study attempted to answer the following questions: Do different habitat conditions affect the biomass allocation between particular organs of individuals? Can the individuals belonging to different populations of the same species realise their own unique reproductive strategy, in other words, can their reproductive effort represent various levels? In the case of L. salicaria the reproductive effort, measured by the participation of infl orescence biomass in the biomass of aboveground parts of genets, exhibits similar values (14.2-15.1% in all the study populations, despite their habitat conditions. This fact proves that at the population level, the reproductive effort is relatively stable. Great differences are visible in the case of particular individuals within each of the populations. Specific genets in a population, depending on the habitat microstructure and the biotic relations with other individuals both of their own and other species, may realise their own reproductive strategies, being a part of their life strategies.

Life Cycle Design - a Route to the Sustainable Industrial Culture?

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky; Wenzel, Henrik; Alting, Leo

1999-01-01

In the attempt to reorient Society's development in a more sustainable direction attention is focused on the environmental impact of products and systems over their entire life cycle, but how can the environmental life cycle perspective be introduced into the design of new solutions and how much...... can be optained through life cycle design? The authors' experience with integration of environmental considerations in product development is presented, ranging from the detailed interactive approach to the EDIP-method through various simplified approaches. The potential for environmental improvements...... is reviewed and the overall question of to what extent life cycle design is a route to the sustainable industrial culture is discussed....

Life Cycle Energy Analysis of Reclaimed Water Reuse Projects in Beijing.

Science.gov (United States)

Fan, Yupeng; Guo, Erhui; Zhai, Yuanzheng; Chang, Andrew C; Qiao, Qi; Kang, Peng

2018-01-01

  To illustrate the benefits of water reuse project, the process-based life cycle analysis (LCA) could be combined with input-output LCA to evaluate the water reuse project. Energy is the only evaluation parameter used in this study. Life cycle assessment of all energy inputs (LCEA) is completed mainly by the life cycle inventory (LCI), taking into account the full life cycle including the construction, the operation, and the demolition phase of the project. Assessment of benefit from water reuse during the life cycle should focus on wastewater discharge reduction and water-saving benefits. The results of LCEA of Beijing water reuse project built in 2014 in a comprehensive way shows that the benefits obtained from the reclaimed water reuse far exceed the life cycle energy consumption. In this paper, the authors apply the LCEA model to estimate the benefits of reclaimed water reuse projects quantitatively.

Life cycle and nano-products: end-of-life assessment

International Nuclear Information System (INIS)

Asmatulu, Eylem; Twomey, Janet; Overcash, Michael

2012-01-01

Understanding environmental impacts of nanomaterials necessitates analyzing the life cycle profile. The initial emphasis of nanomaterial life cycle studies has been on the environmental and health effects of nanoproducts during the production and usage stages. Analyzing the end-of-life (eol) stage of nanomaterials is also critical because significant impacts or benefits for the environment may arise at that particular stage. In this article, the Woodrow Wilson Center’s Project on Emerging Nanotechnologies (PEN) Consumer Products Inventory (CPI) model was used, which contains a relatively large and complete nanoproduct list (1,014) as of 2010. The consumer products have wide range of applications, such as clothing, sports goods, personal care products, medicine, as well as contributing to faster cars and planes, more powerful computers and satellites, better micro and nanochips, and long-lasting batteries. In order to understand the eol cycle concept, we allocated 1,014 nanoproducts into the nine end-of-life categories (e.g., recyclability, ingestion, absorption by skin/public sewer, public sewer, burning/landfill, landfill, air release, air release/public sewer, and other) based on probable final destinations of the nanoproducts. This article highlights the results of this preliminary assessment of end-of-life stage of nanoproducts. The largest potential eol fate was found to be recyclability, however little literature appears to have evolved around nanoproduct recycling. At lower frequency is dermal and ingestion human uptake and then landfill. Release to water and air are much lower potential eol fates for current nanoproducts. In addition, an analysis of nano-product categories with the largest number of products listed indicated that clothes, followed by dermal-related products and then sports equipment were the most represented in the PEN CPI (http

Life cycle and nano-products: end-of-life assessment

Energy Technology Data Exchange (ETDEWEB)

Asmatulu, Eylem; Twomey, Janet; Overcash, Michael, E-mail: mrovercash@earthlink.net [Wichita State University, Department of Industrial and Manufacturing Engineering (United States)

2012-03-15

Understanding environmental impacts of nanomaterials necessitates analyzing the life cycle profile. The initial emphasis of nanomaterial life cycle studies has been on the environmental and health effects of nanoproducts during the production and usage stages. Analyzing the end-of-life (eol) stage of nanomaterials is also critical because significant impacts or benefits for the environment may arise at that particular stage. In this article, the Woodrow Wilson Center's Project on Emerging Nanotechnologies (PEN) Consumer Products Inventory (CPI) model was used, which contains a relatively large and complete nanoproduct list (1,014) as of 2010. The consumer products have wide range of applications, such as clothing, sports goods, personal care products, medicine, as well as contributing to faster cars and planes, more powerful computers and satellites, better micro and nanochips, and long-lasting batteries. In order to understand the eol cycle concept, we allocated 1,014 nanoproducts into the nine end-of-life categories (e.g., recyclability, ingestion, absorption by skin/public sewer, public sewer, burning/landfill, landfill, air release, air release/public sewer, and other) based on probable final destinations of the nanoproducts. This article highlights the results of this preliminary assessment of end-of-life stage of nanoproducts. The largest potential eol fate was found to be recyclability, however little literature appears to have evolved around nanoproduct recycling. At lower frequency is dermal and ingestion human uptake and then landfill. Release to water and air are much lower potential eol fates for current nanoproducts. In addition, an analysis of nano-product categories with the largest number of products listed indicated that clothes, followed by dermal-related products and then sports equipment were the most represented in the PEN CPI (http

Life cycle cost report of VHLW cask

International Nuclear Information System (INIS)

1995-06-01

This document, the Life Cycle Cost Report (LCCR) for the VHLW Cask, presents the life cycle costs for acquiring, using, and disposing of the VHLW casks. The VHLW cask consists of a ductile iron cask body, called the shielding insert, which is used for storage and transportation, and ultimately for disposal of Defense High Level Waste which has been vitrified and placed into VHLW canisters. Each ductile iron VHLW shielding insert holds one VHLW canister. For transportation, the shielding insert is placed into a containment overpack. The VHLW cask as configured for transportation is a legal weight truck cask which will be licensed by NRC. The purpose of this LCCR is to present the development of the life cycle costs for using the VHLW cask to transport VHLW canisters from the generating sites to a disposal site. Life cycle costs include the cost of acquiring, operating, maintaining, and ultimately dispositioning the VHLW cask and its associated hardware. This report summarizes costs associated with transportation of the VHLW casks. Costs are developed on the basis of expected usage, anticipated source and destination locations, and expected quantities of VHLW which must be transported. DOE overhead costs, such as the costs associated with source and destination facility handling of the VHLW, are not included. Also not included are costs exclusive to storage or disposal of the VHLW waste

Serum uric acid in relation to endogenous reproductive hormones during the menstrual cycle: findings from the BioCycle study

Science.gov (United States)

Mumford, Sunni L.; Dasharathy, Sonya S.; Pollack, Anna Z.; Perkins, Neil J.; Mattison, Donald R.; Cole, Stephen R.; Wactawski-Wende, Jean; Schisterman, Enrique F.

2013-01-01

STUDY QUESTION Do uric acid levels across the menstrual cycle show associations with endogenous estradiol (E2) and reproductive hormone concentrations in regularly menstruating women? SUMMARY ANSWER Mean uric acid concentrations were highest during the follicular phase, and were inversely associated with E2 and progesterone, and positively associated with FSH. WHAT IS KNOWN ALREADY E2 may decrease serum levels of uric acid in post-menopausal women; however, the interplay between endogenous reproductive hormones and uric acid levels among regularly menstruating women has not been elucidated. STUDY DESIGN, SIZE, DURATION The BioCycle study was a prospective cohort study conducted at the University at Buffalo research centre from 2005 to 2007, which followed healthy women for one (n = 9) or 2 (n = 250) menstrual cycle(s). PARTICIPANTS/MATERIALS, SETTING, METHODS Participants were healthy women aged 18–44 years. Hormones and uric acid were measured in serum eight times each cycle for up to two cycles. Marginal structural models with inverse probability of exposure weights were used to evaluate the associations between endogenous hormones and uric acid concentrations. MAIN RESULTS AND THE ROLE OF CHANCE Uric acid levels were observed to vary across the menstrual cycle, with the lowest levels observed during the luteal phase. Every log-unit increase in E2 was associated with a decrease in uric acid of 1.1% (β = −0.011; 95% confidence interval (CI): −0.019, −0.004; persistent-effects model), and for every log-unit increase in progesterone, uric acid decreased by ∼0.8% (β = −0.008; 95% CI: −0.012, −0.004; persistent-effects model). FSH was positively associated with uric acid concentrations, such that each log-unit increase was associated with a 1.6% increase in uric acid (β = 0.016; 95% CI: 0.005, 0.026; persistent-effects model). Progesterone and FSH were also associated with uric acid levels in acute-effects models. Of 509 cycles, 42 were anovulatory

Life cycle assessment of palm-derived biodiesel in Taiwan

KAUST Repository

Maharjan, Sumit; Wang, Wei-Cheng; Teah, Heng Yi

2016-01-01

. This study aims to evaluate the cradle-to-grave life cycle environmental performance of palm biodiesel within two different Asian countries, Malaysia and Taiwan. The phases of the life cycle such as direct land-use-change impact, plantation and milling

Life-cycle cost analysis of adsorption cycles for desalination

KAUST Repository

Thu, Kyaw

2010-08-01

This paper presents the thermo-economic analysis of the adsorption desalination (AD) cycle that is driven by low-temperature waste heat from exhaust of industrial processes or renewable sources. The AD cycle uses an adsorbent such as the silica gel to desalt the sea or brackish water. Based on an experimental prototype AD plant, the life-cycle cost analysis of AD plants of assorted water production capacities has been simulated and these predictions are translated into unit cost of water production. Our results show that the specific energy consumption of the AD cycle is 1.38 kWh/m3 which is the lowest ever reported. For a plant capacity of 1000 m3/d, the AD cycle offers a unit cost of $0.457/m3 as compared to more than $0.9 for the average RO plants. Besides being cost-effective, the AD cycle is also environment-friendly as it emits less CO2 emission per m3 generated, typically 85% less, by comparison to an RO process. © 2010 Desalination Publications.

Life cycle assessment and life cycle costing of bioethanol from sugarcane in Brazil

International Nuclear Information System (INIS)

Luo, Lin; Van der Voet, Ester; Huppes, Gjalt

2009-01-01

Brazil has always been the pioneer in the application of bioethanol as a main fuel for automobiles, hence environmental and economic analyses of the Brazilian ethanol industries are of crucial importance. This study presents a comparative life cycle assessment (LCA) on gasoline and ethanol as fuels, and with two types of blends of gasoline with bioethanol, all used in a midsize car. The focus is on a main application in Brazil, sugarcane based ethanol. The results of two cases are presented: base case - bioethanol production from sugarcane and electricity generation from bagasse; future case - bioethanol production from both sugarcane and bagasse and electricity generation from wastes. In both cases sugar is co-produced. The life cycles of fuels include gasoline production, agricultural production of sugarcane, ethanol production, sugar and electricity co-production, blending ethanol with gasoline to produce E10 (10% of ethanol) and E85 (85%), and finally the use of gasoline, E10, E85 and pure ethanol. Furthermore, a life cycle costing (LCC) was conducted to give an indication on fuel economy in both cases. The results show that in the base case less GHG is emitted; while the overall evaluation of these fuel options depends on the importance attached to different impacts. The future case is certainly more economically attractive, which has been the driving force for development in the ethanol industry in Brazil. Nevertheless, the outcomes depend very much on the assumed price for crude oil. In LCC a steady-state cost model was used and only the production cost was taken into account. In the real market the prices of fuels are very much dependent on the taxes and subsidies. Technological development can help in lowering both the environmental impact and the prices of the ethanol fuels. (author)

LIFE CYCLE ASSESSMENT FOR PC BLEND 2 AIRCRAFT RADOME DEPAINTER

Science.gov (United States)

This report describes the life cycle assessment on a potential replacement solvent blend for aircraft radome depainting at the Oklahoma City Air Logistics Center at Tinker Air Force Base. The life cycle assessment is composed of three separate but interrelated components: life cy...

Life-history theory, chronic childhood illness and the timing of first reproduction in a British birth cohort.

Science.gov (United States)

Waynforth, David

2012-08-07

Life-history theoretical models show that a typical evolutionarily optimal response of a juvenile organism to high mortality risk is to reach reproductive maturity earlier. Experimental studies in a range of species suggest the existence of adaptive flexibility in reproductive scheduling to maximize fitness just as life-history theory predicts. In humans, supportive evidence has come from studies comparing neighbourhoods with different mortality rates, historical and cross-cultural data. Here, the prediction is tested in a novel way in a large (n = 9099), longitudinal sample using data comparing age at first reproduction in individuals with and without life-expectancy-reducing chronic disease diagnosed during childhood. Diseases selected for inclusion as chronic illnesses were those unlikely to be significantly affected by shifting allocation of effort away from reproduction towards survival; those which have comparatively large effects on mortality and life expectancy; and those which are not profoundly disabling. The results confirmed the prediction that chronic disease would associate with early age at first reproduction: individuals growing up with a serious chronic disease were 1.6 times more likely to have had a first child by age 30. Analysis of control variables also confirmed past research findings on links between being raised father-absent and early pubertal development and reproduction.

INFORMATION MODELING OF LIFE CYCLE OF HIGH-RISE CONSTRUCTION PROJECTS

Directory of Open Access Journals (Sweden)

Gusakova Elena Aleksandrovna

2018-02-01

Full Text Available To date, many years’ experience in the construction and operation of high-rise buildings has been accumulated. Its analysis reveals not only the engineering and organizational-technological specifics of such projects, but also systemic gaps in the field of management. In the implementation of large-scale and unique projects for high-rise buildings, the problems and tasks of improving approaches to managing the full life cycle of projects and methods, which will improve their competitiveness, become topical. The systems being used have largely exhausted their resource efficiency, which is associated with automation of traditional “inherited” processes and management structures, as well as development of IT-systems focused on digitalization of the activities of construction company, rather than the project. To solve these problems, it is proposed to carry out: reengineering of the schemes of information interaction between the project’s participants; formation of integrated digital environment for the life cycle of the project; development of systems for integrating data management and project management. Subject: problems, approaches and methods of digitalization of project’s life cycle management in relation to the specifics and features of high-rise buildings. Research objectives: substantiation of the most perspective approaches and methods of information modeling of high-rise construction as the basis for managing the full life cycle of the given project. Materials and methods: the experience of digitalization of design, construction, operation and development of high-rise buildings, presented in specialized literature, is analyzed. The methods for integrating information models of various stages of project’s life cycle and for information interaction of project’s participants are considered. Results: the concept of forming a single digital environment for the project is proposed, taking into account the features of the life

Life cycle assessment of renewable energy sources

CERN Document Server

Singh, Anoop; Olsen, Stig Irving

2013-01-01

Governments are setting challenging targets to increase the production of energy and transport fuel from sustainable sources. The emphasis is increasingly on renewable sources including wind, solar, geothermal, biomass based biofuel, photovoltaics or energy recovery from waste. What are the environmental consequences of adopting these other sources? How do these various sources compare to each other? Life Cycle Assessment of Renewable Energy Sources tries to answer these questions based on the universally adopted method of Life Cycle Assessment (LCA). This book introduces the concept and impor

Comparative myoanatomy of cycliophoran life cycle stages

DEFF Research Database (Denmark)

Neves, Ricardo C.; Cunha, Maria R.; Funch, Peter

2010-01-01

The metazoan phylum Cycliophora includes small cryptic epibionts that live attached to the mouthparts of clawed lobsters. The life cycle is complex, with alternating sexual and asexual generations, and involves several sessile and free-living stages. So far, the morphological and genetic characte......The metazoan phylum Cycliophora includes small cryptic epibionts that live attached to the mouthparts of clawed lobsters. The life cycle is complex, with alternating sexual and asexual generations, and involves several sessile and free-living stages. So far, the morphological and genetic...

Applying life cycle management of colombian cocoa production

Directory of Open Access Journals (Sweden)

Oscar Orlando Ortiz-R

2014-03-01

Full Text Available The present research aims to evaluate the usefulness of the application of Life Cycle Management in the agricultural sector focusing on the environmental and socio-economic aspects of decision making in the Colombian cocoa production. Such appraisal is based on the application of two methodological tools: Life Cycle Assessment, which considers environmental impacts throughout the life cycle of the cocoa production system, and Taguchi Loss Function, which measures the economic impact of a process' deviation from production targets. Results show that appropriate improvements in farming practices and supply consumption can enhance decision-making in the agricultural cocoa sector towards sustainability. In terms of agri-business purposes, such qualitative shift allows not only meeting consumer demands for environmentally friendly products, but also increasing the productivity and competitiveness of cocoa production, all of which has helped Life Cycle Management gain global acceptance. Since farmers have an important role in improving social and economic indicators at the national level, more attention should be paid to the upgrading of their cropping practices. Finally, one fundamental aspect of national cocoa production is the institutional and governmental support available for farmers in face of socio-economic or technological needs.

Life-cycle air emissions from PV power systems

International Nuclear Information System (INIS)

Watt, M.E.; Johnson, A.J.; Outhred, H.R.; Ellis, M.

1998-01-01

This paper addresses the air emission of grid supply versus grid-connected and off-grid photovoltaic power generation, using the framework of life-cycle assessment, in the contents of rural household energy supply in Australia. Emissions of carbon dioxide, sulphur dioxde and nitrous oxides are calculated for the three life-cycle stages of manufacture, use and disposal. Sensitivities to materials and data inputs, as well as to component efficiencies, lifetimes and sizing are discussed. For each supply option, demand management options, including insulation and appliance choice, and the substitution of solar heating or bottled gas for electricity are considered. The best option in all cases, in terms of life-cycle air emissions, is a grid-connected photovoltaic system used to supply an energy-efficient household with a mix of solar, gas and electric appliances. However, in financial terms, with current Australian energy prices, this option represents a high capital and life-cycle costs. Additionally, for the grid options, electricity costs do not significantly disadvantage the high demand scenarios. Both results provide a clear illustration of current Australian energy-pricing policies being in conflict with long-term environmental sustainability. (Author)

Life cycle assessment (LCA) and exergetic life cycle assessment (ELCA) of the production of biodiesel from used cooking oil (UCO)

International Nuclear Information System (INIS)

Talens Peiro, L.; Lombardi, L.; Villalba Mendez, G.; Gabarrell i Durany, X.

2010-01-01

The paper assesses the life cycle of biodiesel from used cooking oil (UCO). Such life cycle involves 4 stages: 1) collection, 2) pre-treatment, 3) delivery and 4) transesterification of UCO. Generally, UCO is collected from restaurants, food industries and recycling centres by authorised companies. Then, UCO is pre-treated to remove solid particles and water to increase its quality. After that, it is charged in cistern trucks and delivered to the biodiesel facility to be then transesterified with methanol to biodiesel. The production of 1 ton of biodiesel is evaluated by a Life Cycle Assessment (LCA) to assess the environmental impact and by an Exergetic Life Cycle Assessment (ELCA) to account for the exergy input to the system. A detailed list of material and energy inputs is done using data from local companies and completed using Ecoinvent 1.2 database. The results show that the transesterification stage causes 68% of the total environmental impact. The major exergy inputs are uranium and natural gas. If targets set by the Spanish Renewable Energy Plan are achieved, the exergy input for producing biodiesel would be reduced by 8% in the present system and consequently environmental impacts and exergy input reduced up to 36% in 2010.

Optimization of life cycle management costs

International Nuclear Information System (INIS)

Banerjee, A.K.

1994-01-01

As can be seen from the case studies, a LCM program needs to address and integrate, in the decision process, technical, political, licensing, remaining plant life, component replacement cycles, and financial issues. As part of the LCM evaluations, existing plant programs, ongoing replacement projects, short and long-term operation and maintenance issues, and life extension strategies must be considered. The development of the LCM evaluations and the cost benefit analysis identifies critical technical and life cycle cost parameters. These open-quotes discoveriesclose quotes result from the detailed and effective use of a consistent, quantifiable, and well documented methodology. The systematic development and implementation of a plant-wide LCM program provides for an integrated and structured process that leads to the most practical and effective recommendations. Through the implementation of these recommendations and cost effective decisions, the overall power production costs can be controlled and ultimately lowered

Life cycle strategies of copepods in coastal upwelling zones

Science.gov (United States)

Peterson, W.

1998-06-01

Life cycles of copepods of coastal upwelling zones are of the multigenerational type—as many as 10 or more generations may be produced each year, depending upon water temperature, food concentration and length of the upwelling season. Abundant food resources and moderate temperature convey advantages to those copepods living in coastal upwelling zones, however, there is a clear disadvantage in that coastal upwelling zones are highly advective environments. Typically, water circulation patterns are such that surface waters are carried offshore, deeper waters carried onshore and most of the water column over the continental shelf is moving equatorward. The challenge to copepod species that inhabit upwelling systems is life cycle closure—how do eggs, nauplii, juveniles and adults avoid being swept out of these ecosystems in the face of persistent transport out of the system? In this review, I first list the species which dominate coastal upwelling ecosystems then discuss three variations on the multigenerational life cycle scheme that are observed in upwelling systems. The latter part of the review is devoted to discussion of how individuals are retained in the productive continental shelf waters within coastal upwelling ecosystems. The suggestion is made that the only copepod species that successfully achieve life cycle closure in such systems are those that are preadapted to upwelling circulation patterns. Our quantitative understanding of the relative importance of physical factors (such as advection) and biological factors (birth, growth, and mortality) on life cycle strategies and population dynamics is quite rudimentary. It would help our understanding if there were more field studies and more computer modeling studies that focused on seasonal cycles of abundance, development times and vertical distribution of life cycle stages, and measurements of water circulation patterns.

Influence of service life on Life Cycle Assessments

NARCIS (Netherlands)

van Nunen, H.; Hendriks, N.A.; Erkelens, P.A.

2003-01-01

Environmental assessment is part of present decision making. But, because of difficulties the assessments are not as profound as could be. Life Cycle Assessment (LCA) is a cradle-to-grave approach and consequently a time factor is embedded. Until now this time factor is fixed and calculations are

From BIM to life cycle information management in infrastructure

NARCIS (Netherlands)

Nederveen, G.A. van; Wolfert, R.; Ruitenbeek, M. van de

2014-01-01

In principle, Building Information Modelling (BIM) should provide a basis for infrastructure information management during the whole life-cycle. In practice however, the use of BIM is normally limited to the design and construction phases. It seems that the use of BIM information in other life-cycle

Examining Neosho madtom reproductive biology using ultrasound and artificial photothermal cycles

Science.gov (United States)

Bryan, J.L.; Wildhaber, M.L.; Noltie, Douglas B.

2005-01-01

We examined whether extended laboratory simulation of natural photothermal conditions could stimulate reproduction in the Neosho madtom Noturus placidus, a federally threatened species. For 3 years, a captive population of Neosho madtoms was maintained under simulated natural conditions and monitored routinely with ultrasound for reproductive condition. Female Neosho madtoms cycled in and out of spawning condition, producing and absorbing oocytes annually. Internal measurements made by means of ultrasound indicated the summer mean oocyte size remained consistent over the years, although estimated fecundity increased with increasing fish length. In the summer of 2001, after 3 years in the simulated natural environment, 13 out of 41 fish participated in 10 spawnings. Simulation of the natural photothermal environment, coupled with within-day temperature fluctuations during the spring rise, seemed important for the spawning of captive Neosho madtoms. The use of ultrasound to assess the reproductive status in Neosho madtoms was effective and resulted in negligible stress or injury to the fish. These procedures may facilitate future culture of this species and other madtoms Noturus spp., especially when species are rare, threatened, or endangered. ?? Copyright by the American Fisheries Society 2005.

Waste-to-energy: A review of life cycle assessment and its extension methods.

Science.gov (United States)

Zhou, Zhaozhi; Tang, Yuanjun; Chi, Yong; Ni, Mingjiang; Buekens, Alfons

2018-01-01

This article proposes a comprehensive review of evaluation tools based on life cycle thinking, as applied to waste-to-energy. Habitually, life cycle assessment is adopted to assess environmental burdens associated with waste-to-energy initiatives. Based on this framework, several extension methods have been developed to focus on specific aspects: Exergetic life cycle assessment for reducing resource depletion, life cycle costing for evaluating its economic burden, and social life cycle assessment for recording its social impacts. Additionally, the environment-energy-economy model integrates both life cycle assessment and life cycle costing methods and judges simultaneously these three features for sustainable waste-to-energy conversion. Life cycle assessment is sufficiently developed on waste-to-energy with concrete data inventory and sensitivity analysis, although the data and model uncertainty are unavoidable. Compared with life cycle assessment, only a few evaluations are conducted to waste-to-energy techniques by using extension methods and its methodology and application need to be further developed. Finally, this article succinctly summarises some recommendations for further research.

Optimal Life Cycle Portfolio Choice with Housing Market Cycles

DEFF Research Database (Denmark)

Fischer, Marcel; Stamos, Michael Z.

2013-01-01

income, and pre-existing housing wealth but also the state of the housing market significantly affect household decisions. Consistently with the data, the model predicts that in good states of housing market cycles (1) homeownership rates increase, (2) households buying homes invest a larger share......In recent decades U.S. households have experienced residential house prices moving persistently, that is, returns being positively serially correlated. We set up a realistically calibrated life cycle model with slow-moving time variation in expected housing returns, showing that not only age, labor...

Estimating pesticide emissions for life cycle assessment of agricultural products

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky; Røpke, Inge

2004-01-01

As the first country in Europe Denmark almost 2 years ago established an official center for Life Cycle Assessments and life cycle approaches as an element of the national IPP (Integrated Product Policy). The Danish EPA lends financial support to this important initiative, the aim of which is to: 1....... promote the use of Life Cycle Assessment and other product-oriented environmental tools in companies, 2. support companies and other in using environmental assessment of products and services, 3. ensure that the effort in the LCA area is based on a solid and scientific basis, and 4. maintain the well...... evaluation finished in September 2004. Important learnings for all who are engaged in dissemination of life cycle thinking in industry will be presented....

Life cycle synchronization is a viral drug resistance mechanism.

Directory of Open Access Journals (Sweden)

Iulia A Neagu

2018-02-01

Full Text Available Viral infections are one of the major causes of death worldwide, with HIV infection alone resulting in over 1.2 million casualties per year. Antiviral drugs are now being administered for a variety of viral infections, including HIV, hepatitis B and C, and influenza. These therapies target a specific phase of the virus's life cycle, yet their ultimate success depends on a variety of factors, such as adherence to a prescribed regimen and the emergence of viral drug resistance. The epidemiology and evolution of drug resistance have been extensively characterized, and it is generally assumed that drug resistance arises from mutations that alter the virus's susceptibility to the direct action of the drug. In this paper, we consider the possibility that a virus population can evolve towards synchronizing its life cycle with the pattern of drug therapy. The periodicity of the drug treatment could then allow for a virus strain whose life cycle length is a multiple of the dosing interval to replicate only when the concentration of the drug is lowest. This process, referred to as "drug tolerance by synchronization", could allow the virus population to maximize its overall fitness without having to alter drug binding or complete its life cycle in the drug's presence. We use mathematical models and stochastic simulations to show that life cycle synchronization can indeed be a mechanism of viral drug tolerance. We show that this effect is more likely to occur when the variability in both viral life cycle and drug dose timing are low. More generally, we find that in the presence of periodic drug levels, time-averaged calculations of viral fitness do not accurately predict drug levels needed to eradicate infection, even if there is no synchronization. We derive an analytical expression for viral fitness that is sufficient to explain the drug-pattern-dependent survival of strains with any life cycle length. We discuss the implications of these findings for

A Framework for BIM-Enabled Life-Cycle Information Management of Construction Project

Directory of Open Access Journals (Sweden)

Xun Xu

2014-08-01

Full Text Available BIM has been widely used in project management, but on the whole the applications have been scattered and the BIM models have not been deployed throughout the whole project life-cycle. Each participant builds their own BIM, so there is a major problem in how to integrate these dynamic and fragmented data together. In order to solve this problem, this paper focuses on BIM-based life-cycle information management and builds a framework for BIM-enabled life-cycle information management. To organize the life-cycle information well, the information components and information flow during the project life-cycle are defined. Then, the application of BIM in life-cycle information management is analysed. This framework will provide a unified platform for information management and ensure data integrity.

Life Cycle Assessment of Slurry Management Technologies

DEFF Research Database (Denmark)

Wesnæs, Marianne; Wenzel, Henrik; Petersen, Bjørn Molt

This report contains the results of Life Cycle Assessments of two slurry management technologies - acidification and decentred incineration. The LCA foundation can be used by the contributing companies for evaluating the environmental sustainability of a specific technology from a holistic Life...... Cycle perspective. Through this the companies can evaluate the environmental benefits and disadvantages of introducing a specific technology for slurry management. From a societal perspective the results can contribute to a clarification of which slurry management technologies (or combination...... of technologies) having the largest potential for reducing the overall environmental impacts....

Analysis within the systems development life-cycle

CERN Document Server

Rock-Evans, Rosemary

1987-01-01

Analysis within the Systems Development Life-Cycle: Book 4, Activity Analysis-The Methods describes the techniques and concepts for carrying out activity analysis within the systems development life-cycle. Reference is made to the deliverables of data analysis and more than one method of analysis, each a viable alternative to the other, are discussed. The """"bottom-up"""" and """"top-down"""" methods are highlighted. Comprised of seven chapters, this book illustrates how dependent data and activities are on each other. This point is especially brought home when the task of inventing new busin

Analysis within the systems development life-cycle

CERN Document Server

Rock-Evans, Rosemary

1987-01-01

Analysis within the Systems Development Life-Cycle: Book 2, Data Analysis-The Methods describes the methods for carrying out data analysis within the systems development life-cycle and demonstrates how the results of fact gathering can be used to produce and verify the analysis deliverables. A number of alternative methods of analysis other than normalization are suggested. Comprised of seven chapters, this book shows the tasks to be carried out in the logical order of progression-preparation, collection, analysis of the existing system (which comprises the tasks of synthesis, verification, an

Caffeinated beverage intake and reproductive hormones among premenopausal women in the BioCycle Study123

Science.gov (United States)

Schisterman, Enrique F; Mumford, Sunni L; Pollack, Anna Z; Zhang, Cuilin; Ye, Aijun; Stanford, Joseph B; Hammoud, Ahmad O; Porucznik, Christina A; Wactawski-Wende, Jean

2012-01-01

Background: Caffeinated beverages are widely consumed among women of reproductive age, but their association with reproductive hormones, and whether race modifies any such associations, is not well understood. Objective: We assessed the relation between caffeine and caffeinated beverage intake and reproductive hormones in healthy premenopausal women and evaluated the potential effect modification by race. Design: Participants (n = 259) were followed for up to 2 menstrual cycles and provided fasting blood specimens for hormonal assessment at up to 8 visits per cycle and four 24-h dietary recalls per cycle. Weighted linear mixed models and nonlinear mixed models with harmonic terms were used to estimate associations between caffeine and hormone concentrations, adjusted for age, adiposity, physical activity, energy and alcohol intakes, and perceived stress. On the basis of a priori assumptions, an interaction between race and caffeine was tested, and stratified results are presented. Results: Caffeine intake ≥200 mg/d was inversely associated with free estradiol concentrations among white women (β = −0.15; 95% CI: −0.26, −0.05) and positively associated among Asian women (β = 0.61; 95% CI: 0.31, 0.92). Caffeinated soda intake and green tea intake ≥1 cup/d (1 cup = 240 mL) were positively associated with free estradiol concentrations among all races: β = 0.14 (95% CI: 0.06, 0.22) and β = 0.26 (95% CI: 0.07, 0.45), respectively. Conclusions: Moderate consumption of caffeine was associated with reduced estradiol concentrations among white women, whereas caffeinated soda and green tea intakes were associated with increased estradiol concentrations among all races. Further research is warranted on the association between caffeine and caffeinated beverages and reproductive hormones and whether these relations differ by race. PMID:22237060

The value of the exergetic life cycle assessment besides the LCA

NARCIS (Netherlands)

Cornelissen, Rene; Hirs, Gerard

2002-01-01

In this paper the value of the exergetic life cycle assessment (ELCA) has been analysed. The ELCA uses the framework of the life cycle assessment (LCA) and can be seen as the exergy analysis of a complete life cycle. The value of the ELCA besides the LCA has been discussed. It is shown that the ELCA

Consumption Over Life Cycle: How Different is Housing?

OpenAIRE

Fang (Annie) Yang

2006-01-01

Micro data over the life cycle shows different patterns of consumption for housing and non-housing goods: the consumption profile of non-housing goods is hump-shaped while the consumption profile for housing first increases monotonically and then flattens out. These patterns hold true at each consumption quartile. This paper develops aquantitative, dynamic general equilibrium model of life-cycle behavior, which generates consumption profiles consistent with the observed data. Borrowing constr...

Sourcing Life Cycle Inventory Data

Science.gov (United States)

The collection and validation of quality lifecycle inventory (LCI) data can be the most difficult and time-consuming aspect of developing a life cycle assessment (LCA). Large amounts of process and production data are needed to complete the LCI. For many studies, the LCA analyst ...

On reproduction in red algae: further research needed at the molecular level

Science.gov (United States)

García-Jiménez, Pilar; Robaina, Rafael R.

2015-01-01

Multicellular red algae (Rhodophyta) have some of the most complex life cycles known in living organisms. Economically valuable seaweeds, such as phycocolloid producers, have a triphasic (gametophyte, carposporophyte, and tetrasporophyte) life cycle, not to mention the intricate alternation of generations in the edible “sushi-alga” nori. It is a well-known fact that reproductive processes are controlled by one or more abiotic factor(s), including day length, light quality, temperature, and nutrients. Likewise, endogenous chemical factors such as plant growth regulators have been reported to affect reproductive events in some red seaweeds. Still, in the genomic era and given the high throughput techniques at our disposal, our knowledge about the endogenous molecular machinery lags far behind that of higher plants. Any potential effective control of the reproductive process will entail revisiting most of these results and facts to answer basic biological questions as yet unresolved. Recent results have shed light on the involvement of several genes in red alga reproductive events. In addition, a working species characterized by a simple filamentous architecture, easy cultivation, and accessible genomes may also facilitate our task. PMID:25755663

On reproduction in red algae: further research needed at the molecular level

Directory of Open Access Journals (Sweden)

Pilar eGarcía-Jiménez

2015-02-01

Full Text Available Multicellular red algae (Rhodophyta have some of the most complex life cycles known in living organisms. Economically valuable seaweeds, such as phycocolloid producers, have a triphasic (gametophyte, carposporophyte and tetrasporophyte life cycle, not to mention the intricate alternation of generations in the edible sushi-alga nori. It is a well-known fact that reproductive processes are controlled by one or more abiotic factor(s, including day length, light quality, temperature and nutrients. Likewise, endogenous chemical factors such as plant growth regulators have been reported to affect reproductive events in some red seaweeds. Still, in the genomic era and given the high throughput techniques at our disposal, our knowledge about the endogenous molecular machinery lags far behind that of higher plants. Any potential effective control of the reproductive process will entail revisiting most of these results and facts to answer basic biological questions as yet unresolved. Recent results have shed light on the involvement of several genes in red alga reproductive events. In addition, a working species characterized by a simple filamentous architecture, easy cultivation and accessible genomes may also facilitate our task.

Evolution of reproductive life histories in island birds worldwide.

Science.gov (United States)

Covas, Rita

2012-04-22

Island environments typically share characteristics such as impoverished biotas and less-seasonal climates, which should be conducive to specific adaptations by organisms. However, with the exception of morphological studies, broad-scale tests of patterns of adaptation on islands are rare. Here, I examine reproductive patterns in island birds worldwide. Reproductive life histories are influenced by latitude, which could affect the response to insularity; therefore, I additionally test this hypothesis. Island colonizers showed mostly bi-parental care, but there was a significant increase in cooperative breeding on islands. Additionally, I found support for previous suggestions of reduced fecundity, longer developmental periods and increased investment in young on islands. However, clutch size increased with latitude at a rate nearly five times faster on the mainland than on the islands revealing a substantially stronger effect of insularity at higher latitudes. Latitude and insularity may also interact to determine egg volume and incubation periods, but these effects were less clear. Analyses of reproductive success did not support an effect of reduced nest predation as a driver of reproductive change, but this requires further study. The effect of latitude detected here suggests that the evolutionary changes associated with insularity relate to environmental stability and improved adult survival.

Life cycle planning: An evolving concept

International Nuclear Information System (INIS)

Moore, P.J.R.; Gorman, I.G.

1994-01-01

Life-cycle planning is an evolving concept in the management of oil and gas projects. BHP Petroleum now interprets this idea to include all development planning from discovery and field appraisal to final abandonment and includes safety, environmental, technical, plant, regulatory, and staffing issues. This article describes in the context of the Timor Sea, how despite initial successes and continuing facilities upgrades, BHPP came to perceive that current operations could be the victim of early development successes, particularly in the areas of corrosion and maintenance. The search for analogies elsewhere lead to the UK North Sea, including the experiences of Britoil and BP, both of which performed detailed Life of Field studies in the later eighties. These materials have been used to construct a format and content for total Life-cycle plans in general and the social changes required to ensure their successful application in Timor Sea operations and deployment throughout Australia

Interpopulational differences in the female reproductive cycle of the southwestern Atlantic estuarine crab Chasmagnathus granulatus Dana, 1851 (Brachyura: Grapsoidea: Varunidae

Directory of Open Access Journals (Sweden)

Romina B. Ituarte

2006-12-01

Full Text Available The female reproductive biology of Chasmagnathus granulatus Dana, a semiterrestrial burrowing crab endemic to the southwestern Atlantic, was compared in two contrasting coastal habitats: San Antonio (SA, marine and Mar Chiquita (MC, estuarial. Mature females were collected monthly for 1.5 years and the ovarian cycle was described using a qualitative scale. Gonadosomatic (GSI and hepatosomatic (HSI indexes were calculated. The highest GSI and HSI occurred early in the reproductive season in SA and during the non-reproductive season in MC. The beginning and duration of the reproductive season also differed between populations: it started later and was shorter in SA. In MC, secondary vitellogenesis continued when the reproductive season had finished, and the ovaries remained fully developed throughout the non-reproductive season (winter. Therefore, females of MC were ready to lay eggs as soon as spring environmental conditions appeared. However, SA females did not attain a fully developed ovary during winter. A limited food supply would restrict the available energy to complete secondary vitellogenesis at the end of the reproductive season in SA, after the last spawning. Thus, the vitellogenic cycle should be completed in the following spring, causing a delay in the beginning of the reproductive period. In addition, the higher temperature amplitude may cause the reproductive period in SA to end early.

Life cycle impact assessment (LCIA) using the ecological scarcity ...

African Journals Online (AJOL)

After it is done, the inventory will be interpreted to the environmental impacts in life cycle impact assessment (LCIA). Two LCIA methods identified were “midpoint and endpoint” approaches. The ecological scarcity (ecopoints) is an LCIA method using “midpoint” approach. From the analysis to both life cycle stages, analysis ...

State-of-the-Art Solid Waste Management Life-Cycle Modeling Workshop

DEFF Research Database (Denmark)

Damgaard, Anders; Levis, James W.

There are many alternatives for the management of solid waste including recycling, biological treatment, thermal treatment and landfill disposal. In many cases, solid waste management systems include the use of several of these processes. Solid waste life-cycle assessment models are often used...... to evaluate the environmental consequences of various waste management strategies. The foundation of every life-cycle model is the development and use of process models to estimate the emissions from solid waste unit processes. The objective of this workshop is to describe life-cycle modeling of the solid...... waste processes and systems. The workshop will begin with an introduction to solid waste life-cycle modeling and available models, which will be followed by sessions on life-cycle process modeling for individual processes (e.g., landfills, biological treatment, and thermal treatment). The first part...

sensitivity analysis on flexible road pavement life cycle cost model

African Journals Online (AJOL)

user

of sensitivity analysis on a developed flexible pavement life cycle cost model using varying discount rate. The study .... organizations and specific projects needs based. Life-cycle ... developed and completed urban road infrastructure corridor ...

Life-cycle assessment of biodiesel versus petroleum diesel fuel

International Nuclear Information System (INIS)

Coulon, R.; Camobreco, V.; Sheehan, J.; Duffield, J.

1995-01-01

The US Department of Energy's Office of Transportation Technologies, DOE's National Renewable Energy Laboratory, the US Department of Agriculture's Office of Energy, and Ecobalance are carrying out a comprehensive Life-Cycle Assessment of soy-based diesel fuel (biodiesel) to quantify the environmental aspects of the cradle-to-grave production and use of biodiesel. The purpose of the project is to produce an analytical tool and database for use by industry and government decision makers involved in alternative fuel use and production. The study also includes a parallel effort to develop a life-cycle model for petroleum diesel fuel. The two models are used to compare the life-cycle energy and environmental implications of petroleum diesel and biodiesel derived from soybean. Several scenarios are studied, analyzing the influence of transportation distances, agricultural practice and allocation rules used. The project also includes effort to integrate spatial data into the inventory analysis and probabilistic uncertainty considerations into the impact assessment stage. Traditional life-cycle inventory analysis includes an aggregation process that eliminates spatial, temporal, and threshold information. This project will demonstrate an approach to life-cycle inventory analysis that retains spatial data for use in impact assessment. Explicit probabilistic treatment of uncertainty in impact assessment will take account of scientific uncertainties, and will attempt to identify the level of spatial detail that most efficiently reduces impact assessment uncertainties

Improving Life-Cycle Cost Management of Spacecraft Missions

Science.gov (United States)

Clardy, Dennon

2010-01-01

This presentation will explore the results of a recent NASA Life-Cycle Cost study and how project managers can use the findings and recommendations to improve planning and coordination early in the formulation cycle and avoid common pitfalls resulting in cost overruns. The typical NASA space science mission will exceed both the initial estimated and the confirmed life-cycle costs by the end of the mission. In a fixed-budget environment, these overruns translate to delays in starting or launching future missions, or in the worst case can lead to cancelled missions. Some of these overruns are due to issues outside the control of the project; others are due to the unpredictable problems (unknown unknowns) that can affect any development project. However, a recent study of life-cycle cost growth by the Discovery and New Frontiers Program Office identified a number of areas that are within the scope of project management to address. The study also found that the majority of the underlying causes for cost overruns are embedded in the project approach during the formulation and early design phases, but the actual impacts typically are not experienced until late in the project life cycle. Thus, project management focus in key areas such as integrated schedule development, management structure and contractor communications processes, heritage and technology assumptions, and operations planning, can be used to validate initial cost assumptions and set in place management processes to avoid the common pitfalls resulting in cost overruns.

The female reproductive cycle of the neotropical snake Atractus pantostictus (Fernandes and Puorto, 1993) from south-eastern Brazil.

Science.gov (United States)

de Resende, F C; Nascimento, L B

2015-06-01

Data on reproductive activity of fossorial species are limited because the specimens are difficult to be observed and captured. Here in, we present the reproductive cycle of female Atractus pantostictus, a fossorial neotropical species, and the sexual maturity of males and females in south-eastern Brazil. The female reproductive cycle of A. pantostictus is seasonal, with vitellogenic follicles being found from September to April and eggs in November, February, March and April with the number varying between two and four. Spermatozoa were found in the lumen of the glandular and non-glandular uterus in females collected during the rainy season. Sperm storage tubules were found in the posterior infundibulum of the females, where the storage of sperm occurs for a short time. The storage may occur because mating and ovulation are dissociated. © 2014 Blackwell Verlag GmbH.

Towards a life cycle sustainability assessment: making informed choices on products

Energy Technology Data Exchange (ETDEWEB)

Ciroth, Andreas [GreenDeltaTC, Berlin (Germany); Finkbeiner, Matthias; Traverso, Marzia [TU Berlin (Germany); Hildenbrand, Jutta [Chalmers University (United States); Kloepffer, Walter [Editor-in-Chief of the International Journal of Life Cycle Assessment (Germany); Mazijn, Bernard [Ghent University (Belgium); Prakash, Siddharth [Oeko-Institut (Germany); Sonnemann, Guido; Valdivia, Sonia [UNEP (France); Ugaya, Cassia Maria Lie [Technological Federal University of Parana, ACV (Brazil); Vickery-Niederman, Gina [University of Arkansas (United States)

2011-07-01

In this introduction to the concept of life cycle sustainability assessment (LCSA), we acknowledge the foundations laid by previous works and initiatives. One such initiative has been the ISO 14040 series (Environmental management -- Life cycle assessment -- Principles and framework), which in addition to the ISO 26000: Social Responsibility Guidance Standard, and the contribution of a number of international initiatives (Appendix A) have been essential for the development of this publication. The life cycle of a product involves flows of material, energy and money. Nonetheless, the picture is not complete unless we look also at the production and consumption impacts on all actors along the 'value chain' -- workers, local communities, consumers and society itself. Different life cycle assessment techniques allow individuals and enterprises to assess the impact of their purchasing decisions and production methods along different aspects of this value chain. An (Environmental) life cycle assessment (LCA) looks at potential impacts to the environment as a result of the extraction of resources, transportation, production, use, recycling and discarding of products; life cycle costing (LCC) is used to assess the cost implications of this life cycle; and social life cycle assessment (S-LCA) examines the social consequences. However, in order to get the 'whole picture', it is vital to extend current life cycle thinking to encompass all three pillars of sustainability: (i) environmental, (ii) economic and (iii) social. This means carrying out an assessment based on environmental, economic and social issues -- by conducting an overarching life cycle sustainability assessment (LCSA). This publication shows how all three techniques -- which all share similar methodological frameworks and aims -- can be combined to make the move towards an overarching LCSA possible. Because it is holistic, systemic and rigorous, (environmental) LCA is the preferred technique

Towards a life cycle sustainability assessment: making informed choices on products

Energy Technology Data Exchange (ETDEWEB)

Ciroth, Andreas [GreenDeltaTC, Berlin (Germany); Finkbeiner, Matthias; Traverso, Marzia [TU Berlin (Germany); Hildenbrand, Jutta [Chalmers University (United States); Kloepffer, Walter [Editor-in-Chief of the International Journal of Life Cycle Assessment (Germany); Mazijn, Bernard [Ghent University (Belgium); Prakash, Siddharth [Oeko-Institut (Germany); Sonnemann, Guido; Valdivia, Sonia [UNEP (France); Ugaya, Cassia Maria Lie [Technological Federal University of Parana, ACV (Brazil); Vickery-Niederman, Gina [University of Arkansas (United States)

2011-07-01

In this introduction to the concept of life cycle sustainability assessment (LCSA), we acknowledge the foundations laid by previous works and initiatives. One such initiative has been the ISO 14040 series (Environmental management -- Life cycle assessment -- Principles and framework), which in addition to the ISO 26000: Social Responsibility Guidance Standard, and the contribution of a number of international initiatives (Appendix A) have been essential for the development of this publication. The life cycle of a product involves flows of material, energy and money. Nonetheless, the picture is not complete unless we look also at the production and consumption impacts on all actors along the 'value chain' -- workers, local communities, consumers and society itself. Different life cycle assessment techniques allow individuals and enterprises to assess the impact of their purchasing decisions and production methods along different aspects of this value chain. An (Environmental) life cycle assessment (LCA) looks at potential impacts to the environment as a result of the extraction of resources, transportation, production, use, recycling and discarding of products; life cycle costing (LCC) is used to assess the cost implications of this life cycle; and social life cycle assessment (S-LCA) examines the social consequences. However, in order to get the 'whole picture', it is vital to extend current life cycle thinking to encompass all three pillars of sustainability: (i) environmental, (ii) economic and (iii) social. This means carrying out an assessment based on environmental, economic and social issues -- by conducting an overarching life cycle sustainability assessment (LCSA). This publication shows how all three techniques -- which all share similar methodological frameworks and aims -- can be combined to make the move towards an overarching LCSA possible. Because it is holistic, systemic and rigorous, (environmental) LCA is the preferred technique when it comes to

Life cycle assessment and the agri-food chain

DEFF Research Database (Denmark)

Hermansen, John Erik; Nguyen, T Lan T

2012-01-01

Our food consumption is responsible for a major part of the environmental impact related to our total consumption. Life cycle assessment (LCA) is a product-oriented tool that can be used efficiently to identify improvement options within the food chain covering a product’s life cycle from cradle...... to grave, which is very complex for many foods, and to support choices of consumption. The LCA methodology is supported by public standards and public policy measures and has proved its value in business development for more environmentally friendly products. It is an essential feature that the effects...... of resource use and emissions associated with a product’s life cycle can be aggregated into impact categories (e.g., nonrenewable energy use, land occupation, global warming, acidification, etc.) and further aggregated into overall damage impacts (e.g., impacts on biodiversity, human health, and resource...

Life cycle human health impacts of 875 pesticides

DEFF Research Database (Denmark)

Fantke, Peter; Jolliet, Oliver

2016-01-01

present a consistent framework for characterizing human toxicological impacts associated with pesticides applied to agricultural crops in the frame of life cycle impact assessment based on state-of-the-art data and methods. Methods We combine a dynamic multicrop plant uptake model designed for evaluating......-crop combinations of 10 orders of magnitude. Conclusions Our framework is operational for use in current life cycle impact assessment models, is made available for USEtox, and closes an important gap in the assessment of human exposure to pesticides. For ready use in life cycle assessment studies, we present...... pesticide-crop combination-specific characterization factors normalized to pesticide mass applied and provide default data for application times and loss due to post-harvest food processing. When using our data, we emphasize the need to consult current pesticide regulation, since each pesticide...

Technology development life cycle processes.

Energy Technology Data Exchange (ETDEWEB)

Beck, David Franklin

2013-05-01

This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81 of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.

Local ecological knowledge of fishers about the life cycle and temporal patterns in the migration of mullet (Mugil liza in Southern Brazil

Directory of Open Access Journals (Sweden)

Dannieli Firme Herbst

Full Text Available This research investigates local ecological knowledge of fishers in communities along a latitudinal gradient in the coast of the Santa Catarina State, regarding the life cycle of mullets Mugil liza (migration, feeding, and reproductive behavior. Our sampling encompassed eight Santa Catarina coastal cities (nine artisanal fishing sites and engaged 45 key informants (28- 86 years of age through semi-structured interviews from August/2011 to March/2012. This fish species feeds and grows in lagoon and estuarine systems, migrating to the sea for reproduction, and spawning. Fishers acknowledged the Patos Lagoon and the Plata River as the main source of mullet schools. Migration occurs from South to North and the routes vary according to climatic and oceanographic conditions (e.g., low temperatures, south winds, rainfall, currents, salinity. These conditions influence the abundance of mullets (and therefore fisheries success, their migration and stops in locations such as beaches, rocky shores, and islands. According to fishers, mullet spawning occurs throughout the coast of the Santa Catarina State and they feed in lagoons and riverine systems but also out at sea during migration. In conclusion, fishers possess a detailed knowledge about mullet life cycle and they identify intra and interannual variations in migration routes, a pattern that should be considered in managing the fishery.

Life-Cycle Models for Survivable Systems

National Research Council Canada - National Science Library

Linger, Richard

2002-01-01

.... Current software development life-cycle models are not focused on creating survivable systems, and exhibit shortcomings when the goal is to develop systems with a high degree of assurance of survivability...

Latitudinal variation in the reproductive cycle of two bivalves with contrasting biogeographical origin along the Humboldt Current Upwelling Ecosystem

Directory of Open Access Journals (Sweden)

Roberto A. Uribe

2012-10-01

Full Text Available Argopecten purpuratus (Lamarck, 1819 and Mesodesma donacium (Lamarck, 1818 are bivalves that inhabit the Humboldt Current Upwelling Ecosystem. They have contrasting biogeographical origins, suggesting that their responses to exogenous factors should differ. Using circular statistics, we examine synchrony/asynchrony in the reproductive cycle between populations of each species. The results indicate that there is reproductive asynchrony in both species along their distributional range. However, there was synchrony for A. purpuratus in several location-pairs, including Paita-Chimbote, Chimbote-Callao, Callao-Pisco and Pisco-Antofagasta. For M. donacium, there were only two synchronic groups: Camaná-Capellanía-Mehuín and Hornitos-Peñuelas-Longotoma-La Ligua-Cucao-Quilanlar. A. purpuratus showed gametogenenic activity throughout the year. In contrast, M. donacium showed strong seasonality, with gametogenesis in winter and spawning in spring/summer. In conclusion, the patterns observed for these sympatric species suggest that on a large scale the reproductive cycles follow the expected patterns for the contrasting biogeographic origin of each species, so it could be argued that they are modulated by endogenous factors. However, at a local scale, the reproductive cycles of these species show variation, likely determined by local oceanographic or hydrographic processes.

Nuclear plant life cycle management implementation guide. Final report

International Nuclear Information System (INIS)

Sliter, G.E.; Negin, C.A.

1998-11-01

Nuclear power plants, as baseload suppliers of electricity, are major corporate assets. As the nuclear industry enters its fourth decade as a major producer of clean electricity, the structure of the utility industry is undergoing a historical landmark transition from economic deregulation to a competitive, market-driven industry. An integral part of competition is to manage the operation of the key asset, the plant, in the long term, thereby enhancing its long-term profitability. Life cycle management (LCM) is a well-known technical-economic decision-making process for any large industrial facility. LCM optimizes the service life of a facility and maximizes its life-cycle asset value. LCM integrates aging management (maintaining the availability of costly-to-replace components and structures) with asset management (plant valuation and investment strategies that account for economic, performance, regulatory, and environmental uncertainties). LCM involves predicting maintenance, repair, and other capital costs for a nuclear unit far into the future, as well as planning and managing strategic issues such as waste disposal, fuel storage, decommissioning, and public acceptance. This Life Cycle Management Implementation Guide introduces the reader to the LCM concept and its benefits, describes the elements and activities associated with an LCM program (most of which already exist in all plants), gives an overview of asset and aging management, and provides key references related to life cycle management for nuclear power plants. It also summarizes the major elements of life cycle management required for license renewal or, for newer plants, keeping open the option of license renewal

A Life-Cycle Analysis of Social Security with Housing

OpenAIRE

Chen, Kaiji

2009-01-01

This paper incorporates two features of housing in a life-cycle analysis of social security: housing as a durable good and housing market frictions. We find that with housing as a durable good unfunded social security substantially crowds out housing consumption throughout the life cycle. By contrast, aggregate non-durable consumption is higher when social security is present, although it is postponed until late in life. Moreover, in the presence of housing market frictions, social security l...

KOH concentration effect on the cycle life of nickel-hydrogen cells

Science.gov (United States)

Lim, H. S.; Verzwyvelt, S. A.

1985-01-01

Effects of KOH concentration on the cycle life of a sintered-type nickel electrode were studied in a boiler plate nickel-hydrogen cell at 23 C using an accelerated 45-min cycle regime at 80 percent depth of discharge. The cycle life improved greatly as the KOH concentration decreased, although the initial capacity of the cell decreased slightly. The cycle life improved by a factor of two or more when the KOH concentration was reduced from 36 to 31 percent and by a similar factor from reductions of 31 to 26 percent. For many applications, this life improvement may outweigh the initial capacity decrease.

Life cycle assessment of electronic waste treatment

International Nuclear Information System (INIS)

Hong, Jinglan; Shi, Wenxiao; Wang, Yutao; Chen, Wei; Li, Xiangzhi

2015-01-01

Highlights: • Life cycle assessment of electronic waste recycling is quantified. • Key factors for reducing the overall environmental impact are indentified. • End-life disposal processes provide significant environmental benefits. • Efficiently reduce the improper disposal amount of e-waste is highly needed. • E-waste incineration can generate significant environmental burden. - Abstract: Life cycle assessment was conducted to estimate the environmental impact of electronic waste (e-waste) treatment. E-waste recycling with an end-life disposal scenario is environmentally beneficial because of the low environmental burden generated from human toxicity, terrestrial ecotoxicity, freshwater ecotoxicity, and marine ecotoxicity categories. Landfill and incineration technologies have a lower and higher environmental burden than the e-waste recycling with an end-life disposal scenario, respectively. The key factors in reducing the overall environmental impact of e-waste recycling are optimizing energy consumption efficiency, reducing wastewater and solid waste effluent, increasing proper e-waste treatment amount, avoiding e-waste disposal to landfill and incineration sites, and clearly defining the duties of all stakeholders (e.g., manufacturers, retailers, recycling companies, and consumers)

Life cycle assessment of electronic waste treatment

Energy Technology Data Exchange (ETDEWEB)

Hong, Jinglan, E-mail: hongjing@sdu.edu.cn [Shandong Provincial Key Laboratory of Water Pollution Control and Resource Reuse, School of Environmental Science and Engineering, Shandong University, Jinan 250100 (China); Shandong University Climate Change and Health Center, Public Health School, Shandong University, Jinan 250012 (China); Shi, Wenxiao [Shandong Provincial Key Laboratory of Water Pollution Control and Resource Reuse, School of Environmental Science and Engineering, Shandong University, Jinan 250100 (China); Wang, Yutao [School of Life Science, Shandong University, Shanda South Road 27, Jinan 250100 (China); Chen, Wei [Shandong Provincial Key Laboratory of Water Pollution Control and Resource Reuse, School of Environmental Science and Engineering, Shandong University, Jinan 250100 (China); Li, Xiangzhi, E-mail: xiangzhi@sdu.edu.cn [School of Medicine, Shandong University, Jinan 250012 (China)

2015-04-15

Highlights: • Life cycle assessment of electronic waste recycling is quantified. • Key factors for reducing the overall environmental impact are indentified. • End-life disposal processes provide significant environmental benefits. • Efficiently reduce the improper disposal amount of e-waste is highly needed. • E-waste incineration can generate significant environmental burden. - Abstract: Life cycle assessment was conducted to estimate the environmental impact of electronic waste (e-waste) treatment. E-waste recycling with an end-life disposal scenario is environmentally beneficial because of the low environmental burden generated from human toxicity, terrestrial ecotoxicity, freshwater ecotoxicity, and marine ecotoxicity categories. Landfill and incineration technologies have a lower and higher environmental burden than the e-waste recycling with an end-life disposal scenario, respectively. The key factors in reducing the overall environmental impact of e-waste recycling are optimizing energy consumption efficiency, reducing wastewater and solid waste effluent, increasing proper e-waste treatment amount, avoiding e-waste disposal to landfill and incineration sites, and clearly defining the duties of all stakeholders (e.g., manufacturers, retailers, recycling companies, and consumers)

Life cycle evaluation of spaceflight qualified nickel-hydrogen batteries

Energy Technology Data Exchange (ETDEWEB)

Coates, D.K.; Brill, J.N. [Eagle-Picher Industries, Inc., Joplin, MO (United States). Advanced Systems Operation

1995-12-31

Life cycle test results are summarized from more than 300 spaceflight qualified nickel-hydrogen (NiH{sub 2}) battery cells currently on life test. Cells ranging in size from 4 ampere-hours (Ah) to 120 Ah are being tested under a variety of conditions to support current NiH{sub 2} battery applications. Results to date include 55,600 accelerated LEO cycles at 30% DOD; 102,840 accelerated LEO cycles at 15% DOD; 44,900 cycles under a real-time LEO profile; 44,100 cycles in real-time LEO; 30 accelerated GEO eclipse seasons and 7 real-time GEO eclipse seasons, both at 75% DOD maximum. Alternative separator materials have completed more than 40,000 charge/discharge cycles in accelerated LEO testing and advanced design electrocatalytic hydrogen electrodes have completed more than 16,000 cycles in real-time LEO testing. Common pressure vessel cell designs have completed 18,000 cycles in real-time LEO testing at 45% DOD.

Life cycle assessment of a wind farm and related externalities

DEFF Research Database (Denmark)

Schleisner, Liselotte

2000-01-01

This paper concentrates on the assessment of energy and emissions related to the production and manufacture of materials for an offshore wind farm as well as a wind farm on land based on a life cycle analysis (LCA) model. In Denmark a model has been developed for life cycle assessments of different...... materials. The model is able to assess the energy use related to the production, transportation and manufacture of 1 kg of material. The energy use is divided into fuels used in order to estimate the emissions through the life cycle. In the paper the model and the attached assumptions are described......, and the model is demonstrated for two wind farms. The externalities for the wind farms are reported, showing the importance of life cycle assessment for renewable energy technologies. (C) 2000 Elsevier Science Ltd. All rights reserved....

Petri Net Modeling of Computer Virus Life Cycle | Ikekonwu ...

African Journals Online (AJOL)

Virus life cycle, which refers to the stages of development of a computer virus, is presented as a suitable area for the application of Petri nets. Petri nets a powerful modeling tool in the field of dynamic system analysis is applied to model the virus life cycle. Simulation of the derived model is also presented. The intention of ...

Organizational Life Cycle and the Growth of Information Technology Stage Theory

Directory of Open Access Journals (Sweden)

Jamshid Nazemi

2012-10-01

Full Text Available : Organizations have the different patterns of behaviors on management practice and the use of systems during their life cycle and due to rapid growth of information technology, the application of appropriate technologies is becoming an essential part of business, as well. The adaptation of appropriate management systems on different stages of organizational life period will affect on sustainability of the firms and success to move to next stage and alignment and collaboration schema of IS/IT and business requirement affects on management effectiveness at every stage. This research investigated the significance of relationship between management behavior and IS/IT usage and the generic approach selected by companies. The results showed that organizations have chosen different approach during their life cycle and as they faced with unique challenges on each stage, a common practice on using information technology and applications became part of organizational life cycle. A generic model for information technology usage on organization life cycle was also developed that will assist organizations to select and develop IS/IT plans which addresses the requirements for each stage of life cycle.

Assessing environmental impacts in a life cycle perspective

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky

2005-01-01

is focused on the product system which comprises all the processes which the product and its components meet throughout their lives- from the extraction of raw materials via manufacture, use and waste management to final disposal, or in short from the cradle to the grave (see Figure 1). The focus......What are the environmental impacts from an armchairor a cellular phone or a steak, if you take into account all the activities needed to produce, maintain, use or consume and eventually dispose of it? Life cycle impact assessment is the part of life cycle assessment (LCA) where the inventory...... of material flows in the life cycle of a product are translated into environmental impacts and consumption of resources, and questions like these are given an answer. The environmental impacts may range from very local (e.g. land use) to global (like climate change). As an environmental analysis tool, LCA...

Geothermal life cycle assessment - part 3

Energy Technology Data Exchange (ETDEWEB)

Sullivan, J. L. [Argonne National Lab. (ANL), Argonne, IL (United States); Frank, E. D. [Argonne National Lab. (ANL), Argonne, IL (United States); Han, J. [Argonne National Lab. (ANL), Argonne, IL (United States); Elgowainy, A. [Argonne National Lab. (ANL), Argonne, IL (United States); Wang, M. Q. [Argonne National Lab. (ANL), Argonne, IL (United States)

2013-11-01

A set of key issues pertaining to the environmental performance of geothermal electric power have been addressed. They include: 1) greenhouse gas emissions (GHG) from geothermal facilities, 2) the use of supercritical carbon dioxide (scCO₂) as a geofluid for enhanced geothermal systems (EGS), 3) quantifying the impact of well field exploration on the life cycle of geothermal power, and finally 4) criteria pollutant emissions for geothermal and other electric power generation. A GHG emission rate (g/kWh) distribution as function of cumulative running capacity for California has been developed based on California and U. S. government data. The distribution is similar to a global distribution for compared geothermal technologies. A model has been developed to estimate life cycle energy of and CO₂ emissions from a coupled pair of coal and EGS plants, the latter of which is powered by scCO₂ captured from coal plant side. Depending on the CO₂ capture rate on the coal side and the CO₂ consumption rate on the EGS side, significant reductions in GHG emissions were computed when the combined system is compared to its conventional coal counterpart. In effect, EGS CO₂ consumption acts as a sequestration mechanism for the coal plant. The effects CO₂ emissions from the coupled system, prompt on the coal side and reservoir leakage on the EGS side, were considered as well as the subsequent decline of these emissions after entering the atmosphere over a time frame of 100 years. A model was also developed to provide better estimates of the impact of well field exploration on the life cycle performance of geothermal power production. The new estimates increase the overall life cycle metrics for the geothermal systems over those previously estimated. Finally, the GREET model has been updated to include the most recent criteria pollutant emissions for a range of renewable (including geothermal) and other power

Development of computer software for pavement life cycle cost analysis.

Science.gov (United States)

1988-01-01

The life cycle cost analysis program (LCCA) is designed to automate and standardize life cycle costing in Virginia. It allows the user to input information necessary for the analysis, and it then completes the calculations and produces a printed copy...

The product life cycle revisited

DEFF Research Database (Denmark)

Ulhøi, John Parm

1995-01-01

Efter et introduktionsafsnit følger afsnit II, hvor der gives en historisk analyse af Life Cycle Assessment (LCA) og Environmental Impact Assessment (EIA). I afsnit III munder analysen ud i en vurdering af ligheder og forskelle mellem LCA analyser og EIA analyser, og en diskussion følger af...

Menopause: A Life Cycle Transition.

Science.gov (United States)

Evarts, Barbara Kess; Baldwin, Cynthia

1998-01-01

Family therapists need to address the issue of menopause proactively to be of benefit to couples and families during this transitional period in the family life cycle. Physical, psychological, and psychosocial factors affecting the menopausal woman and her family, and ways to address these issues in counseling are discussed. (Author/EMK)

Sex steroid levels across the reproductive cycle of female leopard geckos, Eublepharis macularius, from different incubation temperatures.

Science.gov (United States)

Rhen, T; Sakata, J T; Zeller, M; Crews, D

2000-05-01

Incubation temperature during embryonic development determines gonadal sex in many reptiles, including the leopard gecko (Eublepharis macularius). In this study, we examined the hormonal and behavioral changes that occur during the reproductive cycle of female leopard geckos from four (i.e., 26, 30, 32.5, and 34 degrees C) incubation temperatures. Controlling for reproductive status, plasma levels of dihydrotestosterone (DHT), testosterone (T), and progesterone (P) varied with incubation temperature but estradiol 17-beta (E2) levels did not. Controlling for the effects of incubation temperature, DHT and T levels were low when females were previtellogenic, increased slightly during early vitellogenesis, increased dramatically during late vitellogenesis (i.e., prior to ovulation), and then decreased to previtellogenic levels after ovulation. In contrast, E2 levels increased gradually from the previtellogenic stage to the early vitellogenic stage, peaked during late vitellogenesis, and decreased to previtellogenic levels after ovulation. Levels of P increased from the previtellogenic stage to the early vitellogenic stage, remained elevated during late vitellogenesis, and then decreased after ovulation. Moreover, we determined that females were not sexually receptive when previtellogenic, were somewhat receptive during early vitellogenesis (approximately 20% receptive), were most receptive during late vitellogenesis (approximately 80% receptive), and were again unreceptive after ovulation. Incubation temperature did not influence receptivity. Overall, these data show that hormone levels and behavior change coordinately during the reproductive cycle. Although incubation temperature has persistent effects on endocrine physiology in adult female leopard geckos, these effects are modest compared to hormonal changes across the reproductive cycle.

Life cycle uses of concrete for more sustainable construction

Energy Technology Data Exchange (ETDEWEB)

Horvath, A. [Univ. of California, Berkeley, CA (United States). Dept. of Civil and Environmental Engineering

2001-07-01

This paper examined ways in which the environmental burdens of construction in general and concrete production in particular can be reduced. Aggregates for concrete production include sand, gravel and stone. They account for most (80 per cent) of the materials used in the United States. This paper argued that given the fact that environmental concerns are an important social issue, the issue of natural resource conservation should be addressed. Some of the life-cycle assessments and comparative design issues associated with concrete construction were summarized. The author presented the example that often the initial cost of a new pavement application may indicate a lower environmental impact than an equivalent design when asphalt is used over reinforced concrete. However, annualized impacts may result in comparable environmental assessments. The same is true for bridge girders, reinforced concrete also seems to be a better environmental choice than steel. This paper also described end-of-life options that involve the use of waste products and recycled products in concrete and other materials to reduce the overall environmental impacts of a product or facility. This paper was divided into several sections entitled: life cycle assessments; life cycle inventory assessment of concretes and asphalt pavements; and, life cycle inventory assessment of concrete and steel bridge girders. 16 refs., 4 tabs.

Differential reproductive responses to stress reveal the role of life-history strategies within a species.

Science.gov (United States)

Schultner, J; Kitaysky, A S; Gabrielsen, G W; Hatch, S A; Bech, C

2013-11-22

Life-history strategies describe that 'slow'- in contrast to 'fast'-living species allocate resources cautiously towards reproduction to enhance survival. Recent evidence suggests that variation in strategies exists not only among species but also among populations of the same species. Here, we examined the effect of experimentally induced stress on resource allocation of breeding seabirds in two populations with contrasting life-history strategies: slow-living Pacific and fast-living Atlantic black-legged kittiwakes. We tested the hypothesis that reproductive responses in kittiwakes under stress reflect their life-history strategies. We predicted that in response to stress, Pacific kittiwakes reduce investment in reproduction compared with Atlantic kittiwakes. We exposed chick-rearing kittiwakes to a short-term (3-day) period of increased exogenous corticosterone (CORT), a hormone that is released during food shortages. We examined changes in baseline CORT levels, parental care and effects on offspring. We found that kittiwakes from the two populations invested differently in offspring when facing stress. In response to elevated CORT, Pacific kittiwakes reduced nest attendance and deserted offspring more readily than Atlantic kittiwakes. We observed lower chick growth, a higher stress response in offspring and lower reproductive success in response to CORT implantation in Pacific kittiwakes, whereas the opposite occurred in the Atlantic. Our findings support the hypothesis that life-history strategies predict short-term responses of individuals to stress within a species. We conclude that behaviour and physiology under stress are consistent with trade-off priorities as predicted by life-history theory. We encourage future studies to consider the pivotal role of life-history strategies when interpreting inter-population differences of animal responses to stressful environmental events.

Life-cycle design for sustainable architecture

Directory of Open Access Journals (Sweden)

Francesca Thiébat

2013-05-01

Full Text Available Sustainability in architecture should involve environmental and social aspects and also economic aspects. However, in a design process budget issues usually outweigh ecological aspects. How can we then drive clients and builders to put more socially responsible buildings on the market that do not exceed the fixed budget but are environmentally friendly? This paper propose an economic and environmental assessment tool to aid private or public building designers and owners to find the global sustainability value of a green building within a life cycle perspective. Sustainable life cycle tools for buildings design and construction help to achieve successfully integrated architecture. The research here presented proposes a new point of view of the “time-cost-quality triangle” of Project Management, by introducing three further aspects: environment, society and aesthetics.

Incorporating time-corrected life cycle greenhouse gas emissions in vehicle regulations.

Science.gov (United States)

Kendall, Alissa; Price, Lindsay

2012-03-06

Beginning with model year 2012, light-duty vehicles sold in the U.S. are subject to new rules that regulate tailpipe greenhouse gas (GHG) emissions based on grams of CO(2)-equivalent per mile (gCO(2)e/mi). However, improvements in vehicle technology, lower-carbon fuels, and improvements in GHG accounting practices which account for distortions related to emissions timing all contribute to shifting a greater portion of life cycle emissions away from the vehicle use phase and toward the vehicle production phase. This article proposes methods for calculating time-corrected life cycle emissions intensity on a gCO(2)e/mi basis and explores whether regulating only tailpipe CO(2) could lead to an undesirable regulatory outcome, where technologies and vehicle architectures with higher life cycle GHGs are favored over technologies with lower life cycle emissions but with higher tailpipe GHG emissions. Two life cycle GHG assessments for future vehicles are presented in addition to time correction factors for production and end-of-life GHG emissions. Results demonstrate that, based on the vehicle designs considered here, there is a potential for favoring vehicles with higher life cycle emissions if only tailpipe emissions are regulated; moreover, the application of time correction factors amplifies the importance of production emissions and the potential for a perverse outcome.

LIFE Materials: Fuel Cycle and Repository Volume 11

Energy Technology Data Exchange (ETDEWEB)

Shaw, H; Blink, J A

2008-12-12

The fusion-fission LIFE engine concept provides a path to a sustainable energy future based on safe, carbon-free nuclear power with minimal nuclear waste. The LIFE design ultimately offers many advantages over current and proposed nuclear energy technologies, and could well lead to a true worldwide nuclear energy renaissance. When compared with existing and other proposed future nuclear reactor designs, the LIFE engine exceeds alternatives in the most important measures of proliferation resistance and waste minimization. The engine needs no refueling during its lifetime. It requires no removal of fuel or fissile material generated in the LIFE engine. It leaves no weapons-attractive material at the end of life. Although there is certainly a need for additional work, all indications are that the 'back end' of the fuel cycle does not to raise any 'showstopper' issues for LIFE. Indeed, the LIFE concept has numerous benefits: (1) Per unit of electricity generated, LIFE engines would generate 20-30 times less waste (in terms of mass of heavy metal) requiring disposal in a HLW repository than does the current once-through fuel cycle. (2) Although there may be advanced fuel cycles that can compete with LIFE's low mass flow of heavy metal, all such systems require reprocessing, with attendant proliferation concerns; LIFE engines can do this without enrichment or reprocessing. Moreover, none of the advanced fuel cycles can match the low transuranic content of LIFE waste. (3) The specific thermal power of LIFE waste is initially higher than that of spent LWR fuel. Nevertheless, this higher thermal load can be managed using appropriate engineering features during an interim storage period, and could be accommodated in a Yucca-Mountain-like repository by appropriate 'staging' of the emplacement of waste packages during the operational period of the repository. The planned ventilation rates for Yucca Mountain would be sufficient for LIFE waste

LIFE Materials: Fuel Cycle and Repository Volume 11

International Nuclear Information System (INIS)

Shaw, H.; Blink, J.A.

2008-01-01

The fusion-fission LIFE engine concept provides a path to a sustainable energy future based on safe, carbon-free nuclear power with minimal nuclear waste. The LIFE design ultimately offers many advantages over current and proposed nuclear energy technologies, and could well lead to a true worldwide nuclear energy renaissance. When compared with existing and other proposed future nuclear reactor designs, the LIFE engine exceeds alternatives in the most important measures of proliferation resistance and waste minimization. The engine needs no refueling during its lifetime. It requires no removal of fuel or fissile material generated in the LIFE engine. It leaves no weapons-attractive material at the end of life. Although there is certainly a need for additional work, all indications are that the 'back end' of the fuel cycle does not to raise any 'showstopper' issues for LIFE. Indeed, the LIFE concept has numerous benefits: (1) Per unit of electricity generated, LIFE engines would generate 20-30 times less waste (in terms of mass of heavy metal) requiring disposal in a HLW repository than does the current once-through fuel cycle. (2) Although there may be advanced fuel cycles that can compete with LIFE's low mass flow of heavy metal, all such systems require reprocessing, with attendant proliferation concerns; LIFE engines can do this without enrichment or reprocessing. Moreover, none of the advanced fuel cycles can match the low transuranic content of LIFE waste. (3) The specific thermal power of LIFE waste is initially higher than that of spent LWR fuel. Nevertheless, this higher thermal load can be managed using appropriate engineering features during an interim storage period, and could be accommodated in a Yucca-Mountain-like repository by appropriate 'staging' of the emplacement of waste packages during the operational period of the repository. The planned ventilation rates for Yucca Mountain would be sufficient for LIFE waste to meet the thermal constraints of

Life-cycle assessment of Nebraska bridges.

Science.gov (United States)

2013-05-01

Life-cycle cost analysis (LCCA) is a necessary component in bridge management systems (BMSs) for : assessing investment decisions and identifying the most cost-effective improvement alternatives. The : LCCA helps to identify the lowest cost alternati...

Life Cycle Thinking, Measurement and Management for Food System Sustainability.

Science.gov (United States)

Pelletier, Nathan

2015-07-07

Food systems critically contribute to our collective sustainability outcomes. Improving food system sustainability requires life cycle thinking, measurement and management strategies. This article reviews the status quo and future prospects for bringing life cycle approaches to food system sustainability to the fore.

Rearing and estimation of life-cycle parameters of the tubicifid worm Branchiura sowerbyi: application to ecotoxicity testing.

Science.gov (United States)

Ducrot, Virginie; Péry, Alexandre R R; Quéau, Hervé; Mons, Raphaël; Lafont, Michel; Garric, Jeanne

2007-10-01

This paper provides original collection, acclimatizing, rearing and toxicity test methods for the freshwater worm Branchiura sowerbyi, an alternative species to Tubifex tubifex for ecotoxicity evaluation of sediments. Influence of the substrate, type of food, and feeding level on individual performances was assessed in short-term tests, in order to set up optimal culture and test conditions. Low-size particles and high organic matter content favoured the growth and reproduction of B. sowerbyi. The relative contribution of sediments and fish food to the individual food intake was assessed using a foraging efficiency model based upon the dynamic energy budget theory. Individual performances were optimal when the substrate plus fish food provided the energy equivalent to 5 mg Tetramin per worm per day, which is the ad libitum food level for adults at 21 degrees C. The life-cycle of the worm was fully characterized using a life-cycle test conducted under the previously defined optimal conditions. Hatching rates were low (32%), whereas newborn and juveniles exhibited high survival (>80%) and growth (2.4 mg/day in juveniles) rates. Age at puberty was low (60 days) when compared to the maximal life span (1100 days) as predicted using a Weibull model. Adults reproduced every other month with a constant fecundity (0.16 cocoon/worm/day). The mean values of the life-cycle parameters and their variability and reproducibility among laboratory studies were discussed in order to identify relevant endpoints to be used in ecotoxicity tests. Survival, juvenile growth, and fecundity may constitute suitable test endpoints, whereas hatching rate and adult growth should not be used as endpoints in B. sowerbyi.

Life cycle management of service water systems

International Nuclear Information System (INIS)

Egan, Geoffrey R.; Besuner, Philip M.; Mahajan, Sat P.

2004-01-01

As nuclear plants age, more attention must focus on age and time dependent degradation mechanisms such as corrosion, erosion, fatigue, etc. These degradation mechanisms can best be managed by developing a life cycle management plan which integrates past historical data, current conditions and future performance needs. In this paper we present two examples of life cycle management. In the first example, the 20-year maintenance history of a sea water cooling system (cement-lined, cast iron) is reviewed to develop attributes like maintenance cost, spare part inventory, corrosion, and repair data. Based on this information, the future expected damage rate was forecast. The cost of managing the future damage was compared with the cost to replace (in kind and with upgraded materials. A decision optimization scheme was developed to choose the least cost option from: a) Run as-is and repair; b) replace in kind; or c) replace with upgraded material and better design. In the second example, life cycle management techniques were developed for a ceilcote lined steel pipe cooling water system. Screens (fixed and traveling), filters, pumps, motors, valves, and piping were evaluated. (author)

The Adult Life Spiral: A Critique of the Life Cycle Model.

Science.gov (United States)

Stein, Peter; Etzkowitz, Henry

We can identify and describe alternate paths of adulthood utilizing data from interviews with single adults. Our review of major models used in adulthood studies suggests that a developmental model, such as Daniel Levinson's life cycle model, is too tied to the notion of the imminent unfolding of the life course. The age-stratification theory…

Fast-slow continuum and reproductive strategies structure plant life-history variation worldwide

DEFF Research Database (Denmark)

Salguero-Gómez, Roberto; Jones, Owen R; Jongejans, Eelke

2016-01-01

The identification of patterns in life-history strategies across the tree of life is essential to our prediction of population persistence, extinction, and diversification. Plants exhibit a wide range of patterns of longevity, growth, and reproduction, but the general determinants of this enormous...... variation in life history are poorly understood. We use demographic data from 418 plant species in the wild, from annual herbs to supercentennial trees, to examine how growth form, habitat, and phylogenetic relationships structure plant life histories and to develop a framework to predict population...

Life-history constraints on the success of the many small eggs reproductive strategy

DEFF Research Database (Denmark)

Andersen, Ken Haste; Beyer, Jan; Pedersen, Martin

2008-01-01

The reproductive strategy of most fishes is to produce a large number of tiny eggs, leading to a huge difference between egg size and asymptotic body size. The viability of this strategy is examined by calculating the life-time reproductive success R0 as a function of the asymptotic body size....... A simple criterion for the optimality of producing small eggs is found, depending on the rate of predation relative to the specific rate of consumption. Secondly it is shown that the success of the reproductive strategy is increasing with asymptotic body size. Finally the existence of both upper and lower...

Techno-Economics & Life Cycle Assessment (Presentation)

Energy Technology Data Exchange (ETDEWEB)

Dutta, A.; Davis, R.

2011-12-01

This presentation provides an overview of the techno-economic analysis (TEA) and life cycle assessment (LCA) capabilities at the National Renewable Energy Laboratory (NREL) and describes the value of working with NREL on TEA and LCA.

Organizational Life Cycles and Shifting Criteria of Effectiveness: Some Preliminary Evidence

OpenAIRE

Robert E. Quinn; Kim Cameron

1983-01-01

This paper discusses the relationships between stage of development in organizational life cycles and organizational effectiveness. We begin the paper by reviewing nine models of organizational life cycles that have been proposed in the literature. Each of these models identifies certain characteristics that typify organizations in different stages of development. A summary model of life cycle stages is derived that integrates each of these nine models. Next, a framework of organizational eff...

[Benefits of nursing care service in the assisted reproduction clinic to self-cycle-management and self-efficiency of infertility patients].

Science.gov (United States)

Li, Xiao-Qin; Sun, Chao-Feng; Guo, Mei

2017-06-01

To investigate the benefits of nursing care service in the assisted reproduction clinic to self-cycle-management and self-efficiency of the outpatients with infertility. We randomly divided 600 females preliminarily diagnosed with infertility into a control and an experimental group, 288 in the former and 285 in the latter group excluding those whose husbands had azoospermia. For the women patients of the experimental group, we conducted nursing care intervention concerning related knowledge, skills, diet, excise, medication, and psychology, by one-to-one consultation, individualized or group communication, establishing files, telephone follow-up, and wechat guidance. After 3 months of intervention, we compared the compliance of medical visits, effectiveness of cycle management, sense of self-efficiency, satisfaction, and anxiety score between the two groups of patients. In comparison with the controls, the patients of the experimental group showed significantly better knowledge about assisted reproduction and higher effectiveness of self-cycle-management, self-efficiency, and satisfaction (P <0.05), but a markedly lower degree of anxiety (P <0.05). Nursing care service in the assisted reproduction clinic can improve the compliance of medical visits, effectiveness of self-cycle-management, self-efficiency, and satisfaction and reduce the anxiety of the patients.

Environmental impacts of construction materials use: a life cycle perspective

CSIR Research Space (South Africa)

Ampofo-Anti, N

2009-02-01

Full Text Available of the environmental impacts of a product (or service). The Life Cycle Assessment (LCA) concept previously known as Life Cycle Analysis has emerged as one of the most appropriate tools for assessing product-related environmental impacts and for supporting an effective...

Dealing with Emergy Algebra in the Life Cycle Assessment Framework

Science.gov (United States)

The Life Cycle Inventory (LCI) represents one of the four steps of the Life Cycle Assessment (LCA) methodology, which is a standardized procedure (ISO 14040:2006) to estimate the environmental impacts generated by the production, use and disposal of goods and services. In this co...

A CASKCOM: A cask life cycle cost model

International Nuclear Information System (INIS)

Anon.

1989-01-01

CASKCOM (cask cost model) is a computerized model which calculates the life cycle costs (LCC) associated with specific transportation cask designs and discounts those costs, if the user so chooses, to a net present value. The model has been used to help analyze and compare the life cycle economics of burnup credit and nonburnup credit cask designs being considered as conditions for a new generation of spent fuel transportation casks. CASKCOM is parametric in the sense that its input data can be easily changed in order to analyze and compare the life cycle cost implications arising from alternative assumptions. The input data themselves are organized into two main groupings. The first grouping comprises a set of data which is independent of cask design. This first grouping does not change from the analysis of one cask design to another. The second grouping of data is specific to each individual cask design. This second grouping thus changes each time a new cask design is analyzed

Small business life cycle: statics and dynamics (S

Directory of Open Access Journals (Sweden)

Matejun Marek

2017-12-01

Full Text Available The aim of the paper is the presentation of theoretical foundations and the structure of original, 8-stage statics and dynamics model in the small business life cycle. Based on theoretical considerations, two hypotheses concerning the impact of dynamic and static nature of the life-cycle stages on selected determinants and effects of SMEs’ development were formulated. The hypotheses were verified based on the results of the survey conducted on a sample of 1,741 SMEs from 22 countries of the European Union. The results indicate that companies in the dynamic life-cycle stages are run by more enterprising owners, operate in more promising markets with a higher potential and make greater use of market niches thus limiting the level of competition. At the same time, such companies are characterised by higher levels of flexibility and involvement in innovative activities, which translates into obtaining a significantly higher level of business performance, in the area of quantitative as well as qualitative results.

Quantifying Cost Risk Early in the Life Cycle

International Nuclear Information System (INIS)

Mar, B.

2004-01-01

A new method for analyzing life cycle cost risk on large programs is presented that responds to an increased emphasis on improving sustainability for long-term programs. This method provides better long-term risk assessment and risk management techniques. It combines standard Monte Carlo analysis of risk drivers and a new data-driven method developed by the BMDO. The approach permits quantification of risks throughout the entire life cycle without resorting to difficult to support subjective methods. The BMDO methodology is shown to be relatively straightforward to apply to a specific component or process within a project using standard technical risk assessment methods. The total impact on system is obtained using the program WBS, which allows for the capture of correlated risks shared by multiple WBS items. Once the correlations and individual component risks are captured, a Monte Carlo simulation can be run using a modeling tool such as ANALYTICA to produce the overall life cycle cost risk

Sustainable Development Factors in Pavement Life-Cycle: Highway/Airport Review

Directory of Open Access Journals (Sweden)

Peyman Babashamsi

2016-03-01

Full Text Available Sustainability has gained as much importance as management in business. Sustainable pavement development as a business practice should involve making evaluations according to the triple bottom line in the pavement life-cycle. Despite the current approaches to evaluating the social as well as economic and environmental feasibility of pavement projects (involving highway and airport infrastructure, there has recently been a lack of consensus on a methodology to guarantee sustainability upon assessment and analysis during the pavement life-cycle. As sustainability is a complex issue, this study intends to further explore sustainability and elaborate on its meaning. The second step involves a general depiction of the major sustainability appraisal tools, namely cost-benefit analysis, life-cycle cost analysis, life-cycle assessment, multi-criteria decision-making, environmental impact assessment and social life-cycle assessment, and an explanation of their cons and pros. Subsequently, the article addresses the application of an organized methodology to highlight the main factors or concepts that should be applied in sustainable pavement development and, more specifically, in sustainable pavement management. In the final step, research recommendations toward sustainability are given. This study is aimed to assist decision-makers in pavement management to plan sustainability frameworks in accordance with probable boundaries and restrictions.

Biological catalysis of the hydrological cycle: life's thermodynamic function

Science.gov (United States)

Michaelian, K.

2011-01-01

Darwinian theory depicts life as being overwhelmingly consumed by a fight for survival in a hostile environment. However, from a thermodynamic perspective, life is a dynamic out of equilibrium process, stabilizing and coevolving in concert with its abiotic environment. The living component of the biosphere on the surface of the Earth of greatest biomass, the plants and cyanobacteria, are involved in the transpiration of a vast amount of water. Transpiration is part of the global water cycle, and it is this cycle that distinguishes Earth from its apparently life barren neighboring planets, Venus and Mars. The dissipation of sunlight into heat by organic molecules in the biosphere and its coupling to the water cycle (as well as other abiotic processes), is by far the greatest entropy producing process occurring on Earth. Life, from this perspective, can be viewed as performing an important thermodynamic function; acting as a dynamic catalyst by aiding irreversible abiotic process such as the water cycle, hurricanes, and ocean and wind currents to produce entropy. The role of animals in this view is that of unwitting but dedicated servants of the plants and cyanobacteria, helping them to grow and to spread into initially inhospitable areas.

Female reproductive cycle of the Southwestern Atlantic estuarine crab Chasmagnathus granulatus (Brachyura, Grapsoidea, Varunidae

Directory of Open Access Journals (Sweden)

Romina B. Ituarte

2004-03-01

Full Text Available The female reproductive biology of a Chasmagnathus granulatus population inhabiting the area near the mouth of Mar Chiquita coastal lagoon, Argentina, was studied. An increase in air temperature during the spring is related to the start of the breeding period, when well defined egg-laying and hatching pulses were observed. Hatching is synchronic during the whole summer but the egg production was not, probably due to the gradual incorporation of young females to the reproductive population. Neither egg-laying nor larval release showed a clear relation to moon phase or tidal cycles, suggesting that reproduction is not rigidly programmed in this unpredictable habitat. Females moult at the beginning of autumn, after releasing the last larvae. However, a new cohort of ovocytes, which was in primary vitellogenesis before moulting, completed the secondary ovogenesis after moulting. Consequently, ovaries remained fully developed throughout the winter.

Life cycle replacement by gene introduction under an allee effect in periodical cicadas.

Science.gov (United States)

Nariai, Yukiko; Hayashi, Saki; Morita, Satoru; Umemura, Yoshitaka; Tainaka, Kei-ichi; Sota, Teiji; Cooley, John R; Yoshimura, Jin

2011-04-06

Periodical cicadas (Magicicada spp.) in the USA are divided into three species groups (-decim, -cassini, -decula) of similar but distinct morphology and behavior. Each group contains at least one species with a 17-year life cycle and one with a 13-year cycle; each species is most closely related to one with the other cycle. One explanation for the apparent polyphyly of 13- and 17-year life cycles is that populations switch between the two cycles. Using a numerical model, we test the general feasibility of life cycle switching by the introduction of alleles for one cycle into populations of the other cycle. Our results suggest that fitness reductions at low population densities of mating individuals (the Allee effect) could play a role in life cycle switching. In our model, if the 13-year cycle is genetically dominant, a 17-year cycle population will switch to a 13-year cycle given the introduction of a few 13-year cycle alleles under a moderate Allee effect. We also show that under a weak Allee effect, different year-classes ("broods") with 17-year life cycles can be generated. Remarkably, the outcomes of our models depend only on the dominance relationships of the cycle alleles, irrespective of any fitness advantages.

Life cycle replacement by gene introduction under an allee effect in periodical cicadas.

Directory of Open Access Journals (Sweden)

Yukiko Nariai

2011-04-01

Full Text Available Periodical cicadas (Magicicada spp. in the USA are divided into three species groups (-decim, -cassini, -decula of similar but distinct morphology and behavior. Each group contains at least one species with a 17-year life cycle and one with a 13-year cycle; each species is most closely related to one with the other cycle. One explanation for the apparent polyphyly of 13- and 17-year life cycles is that populations switch between the two cycles. Using a numerical model, we test the general feasibility of life cycle switching by the introduction of alleles for one cycle into populations of the other cycle. Our results suggest that fitness reductions at low population densities of mating individuals (the Allee effect could play a role in life cycle switching. In our model, if the 13-year cycle is genetically dominant, a 17-year cycle population will switch to a 13-year cycle given the introduction of a few 13-year cycle alleles under a moderate Allee effect. We also show that under a weak Allee effect, different year-classes ("broods" with 17-year life cycles can be generated. Remarkably, the outcomes of our models depend only on the dominance relationships of the cycle alleles, irrespective of any fitness advantages.

Life-cycle assessment of textiles manufacture of polyester shirt (VB)

DEFF Research Database (Denmark)

Othman, Samer; Peter, Oduro Justice; Hassan, Osama

1998-01-01

According to the EDIP (Environmental Design of Industrial Products), It is made possible to perform resource and environmental profile analysis of the 100% polyester shirt. In order to understand the true life-cycle consequences, life-cycle analysis of a typical 100% polyester shirt was carried out...

Biology and life cycles of pelagic tunicates in the Lazarev Sea, Southern Ocean

Science.gov (United States)

Pakhomov, E. A.; Dubischar, C. D.; Hunt, B. P. V.; Strass, V.; Cisewski, B.; Siegel, V.; von Harbou, L.; Gurney, L.; Kitchener, J.; Bathmann, U.

2011-07-01

Four grid surveys were carried out in the top 200 m layer of the Lazarev Sea during fall 2004, summer 2005-06, winter 2006 and summer 2007-08 onboard the R.V. Polarstern as a part of the German SO-GLOBEC. The distribution, abundance and biology of two species of salps, Salpa thompsoni and Ihlea racovitzai, were investigated. With the exception of fall 2004, I. racovitzai dominated the salp community although being represented by low densities (<20 ind. 1000 m -3). S. thompsoni was scarce during the summers of 2005-06 and 2007-08 and almost absent from the region during winter 2006. Nevertheless, it was modestly numerous during fall 2004 reaching densities of up to 33 ind. 1000 m -3 in the south-western stations of the grid. The data on the seasonal population structure and life cycle of I. racovitzai showed that this species followed the generalized pattern typical of S. thompsoni, i.e. sexual/asexual reproduction and spawning during fall. I. racovitzai densities were the lowest during summer, increased during fall and peaked in during winter. Numerous offspring were produced by I. racovitzai during fall, just before the area became ice-covered. Conversely, S. thompsoni was not able to complete its life cycle in the Lazarev Sea, with a high occurrence of stage X (unfertilized) aggregates present. Highest S. thompsoni densities in summer and fall, and its disappearance in winter are indicative of a population of the expatriate origin that is sustained by advection.

Data life cycle: a perspective from the Information Science

Directory of Open Access Journals (Sweden)

Ricardo César Gonçalves Sant’Ana

2016-08-01

Full Text Available Introduction: Access and use of data as a key factor has been extended to several areas of knowledge of today's society. It’s necessary to develop a new perspective that presents phases and factors involved in these processes, providing an initial analysis structure, allowing the efforts, skills and actions organization related to the data life cycle. Purpose: This article is a proposal for a new look at the data life cycle, that assumes, as a central element, the data itself, supporting itself on the concepts and contributions that Information Science can provide, without giving up the reflections on the role of other key areas such as Computer Science. Methodology: The methodological procedures consisted of bibliographic research and content analysis to describe the phases and factors related to the Data Life Cycle, developing reflections and considerations from context already consolidated in the development of systems that can corroborate the idea of centrality of data. Results: The results describe the phases of: collect, storage, recovery and discard, permeated by transverse factors: privacy, integration, quality, copyright, dissemination and preservation, composing a Data Life Cycle. Conclusions: The current context of the availability of large volumes of data, with great variety and at speeds that provide access in real time, setting the so-called Big Data that requires new concerns about access and use processes of data. The Information Science may offer a new approach, now centered in the data, and contribute to the optimization of Data Life Cycle as a whole, extending bridges between users and the data they need.

Reproductive Health Needs Assessment of Girl and Boy Teenagers

Directory of Open Access Journals (Sweden)

M Shakour

2016-11-01

Full Text Available Background & aim: Reproductive health of puberty is very important in the cycle of Life. Adolescence is a very important period of time in cycle of life and it is followed by physical, psychological and social changes. Therefore the aim of this study was needs assessment of reproductive health for adolescence as a first and principal step in curriculum planning for health services. Methods: This study was qualitative like the most needs assessments and the method was content analysis. Data gathering was done by semi structured interview. We used two focus groups (7and 10persons for needs assessment of reproductive health between girls, and personal interview with 10 boys. We did content analysis and then extracted the main themes and sub themes. Results: Adolescent girls had diverse needs in four groups: experiences related to menstruation and hygiene, social needs, sexual needs and psychological needs. Also adolescent boys had three groups of needs like physical changes, psychological and sexual needs. In physical needs group they had some needs like no knowledge of symptoms of adolescence, no knowledge of hygiene related to puberty. In psychological needs group they had some needs like feeling depression and in sexual needs group they had some needs like tendency to make contacts with girls, no knowledge of communication with people with different sex. Conclusion: Education and the systematic planning in reproductive health matters are necessary for parents, teachers and adolescents, and they are known as the prior needs.

An attributional life cycle assessment for an Italian residential multifamily building.

Science.gov (United States)

Vitale, Pierluca; Arena, Umberto

2017-09-06

The study describes an attributional life cycle assessment carried out according to the ISO standards and focused on an Italian multifamily residential building. The aim was developing an exhaustive and reliable inventory of high-quality primary data, comparing the environmental impacts along the three stages of the building life cycle. The pre-use phase takes into account the production of all the construction materials, transportation, and on-site assembling. The use phase quantifies the resource consumptions for 50 years of the building utilization and ordinary maintenance. The end-of-life phase includes the building demolition and the management of generated wastes. The results quantify how the design criteria affect the environmental performances of the residential building along its life cycle. The role of the pre-use phase appears remarkable for global warming potential (GWP), due to the huge impacts of steel and concrete production processes. The use phase gives the largest contributions, which reach 77% and 84% of the total, for the categories of global warming and non-renewable energy. The end-of-life phase provides limited avoided impacts. A comparative analysis quantifies the improvements achievable with an alternative type of partitions and external walls. Acronyms: AC: air conditioning; C&DW: construction and demolition waste; CFL: compact fluorescent lamp; DHW: domestic hot water; EC: European Commission; EU: European Union; GDP: gross domestic product; GHG: greenhouse gases; GWP: global warming potential; LCA: life cycle assessment; LCI: life cycle inventory; LCIA: life cycle impact assessment; MFA: material flow analysis; NREP: non-renewable energy potential; RINP: respiratory inorganics potential; WFD: Waste Framework Directive.

Application of product life cycle concept to private label management

Directory of Open Access Journals (Sweden)

Sandra Horvat

2013-06-01

Full Text Available Private labels have recorded significant growth rates worldwide, becoming a serious threat to manufacturer brands. Development of private labels in many different product categories increased the complexity of their management. Therefore, this paper examines the possibility of using the product life cycle concept in private label management. Given that private labels are a specific brand type, it is necessary to adjust certain elements of the product life cycle concept, as it was developed on the basis of manufacturer brands. For instance, in the growth stage of the product life cycle, retailers expand private labels to a number of product categories and use the push strategy while manufacturers tend to expand their distribution network in the expansion of their brands and predominantly use the pull strategy in doing so. Furthermore, there is a focus shift from low-price strategy, predominantly used in the introduction phase, to increasing the quality and private label value in the later stages of the product life cycle.

Natural history of Ctenus medius Keyserling, 1891 (Aranae, Ctenidae II: life cycle and aspects of reproductive behavior under laboratory conditions

Directory of Open Access Journals (Sweden)

E. FOLLY-RAMOS

Full Text Available Ctenus medius Keyserling, 1891 is a wandering spider common in the Brazilian Atlantic Forest. It has been the subject of few studies. Thus, this work aims to elucidate aspects of its natural history, such as the life cycle and reproductive behavior of this species, through laboratory and field observations. Two females with egg sacs were observed in the laboratory and one was observed in field (Barra Mansa, 22º32'S and 44º10'W until the emergence of the spiderlings. For observation of the immature stage development, a portion of the spiderlings from the same hatch were taken to the laboratory and watched until sexual maturity. In the field, the period between the oviposition and the emergence of spiderlings was of 36 days. The female selects a site for egg sac deposition and stays there until the spiderlings emerge. Seven days after the emergence, the female abandoned the site where the egg sac was made, concomitant to the spiderlings dispersion from observation's place and until the moment that the spiderlings started to eat. For the spiderlings kept under laboratory conditions, cannibalism was not observed in the first instars (1-4th when sufficient food was offered. Sexual maturity happened in the 14th or 15th instars, with an average of 309.2 to 344.5 days until the last/sexual molt, respectively. Until the date of sexual maturity, there was a mortality rate of 85%. This species is very fragile in captivity. This hampered deductions concerning longevity. Both females and males collected in the field were induced to mate in the laboratory. Courtship movements of males were registered, but the females did not permit the mating. These data may assist in initial biological studies of Ctenus genus and offer comparative parameters for studies of other related species.

Natural history of Ctenus medius Keyserling, 1891 (Aranae, Ctenidae II: life cycle and aspects of reproductive behavior under laboratory conditions

Directory of Open Access Journals (Sweden)

FOLLY-RAMOS E.

2002-01-01

Full Text Available Ctenus medius Keyserling, 1891 is a wandering spider common in the Brazilian Atlantic Forest. It has been the subject of few studies. Thus, this work aims to elucidate aspects of its natural history, such as the life cycle and reproductive behavior of this species, through laboratory and field observations. Two females with egg sacs were observed in the laboratory and one was observed in field (Barra Mansa, 22º32'S and 44º10'W until the emergence of the spiderlings. For observation of the immature stage development, a portion of the spiderlings from the same hatch were taken to the laboratory and watched until sexual maturity. In the field, the period between the oviposition and the emergence of spiderlings was of 36 days. The female selects a site for egg sac deposition and stays there until the spiderlings emerge. Seven days after the emergence, the female abandoned the site where the egg sac was made, concomitant to the spiderlings dispersion from observation's place and until the moment that the spiderlings started to eat. For the spiderlings kept under laboratory conditions, cannibalism was not observed in the first instars (1-4th when sufficient food was offered. Sexual maturity happened in the 14th or 15th instars, with an average of 309.2 to 344.5 days until the last/sexual molt, respectively. Until the date of sexual maturity, there was a mortality rate of 85%. This species is very fragile in captivity. This hampered deductions concerning longevity. Both females and males collected in the field were induced to mate in the laboratory. Courtship movements of males were registered, but the females did not permit the mating. These data may assist in initial biological studies of Ctenus genus and offer comparative parameters for studies of other related species.

Life cycle of the pelagic goby Aphia minuta (Pisces: Gobiidae

Directory of Open Access Journals (Sweden)

M. Iglesias

2001-09-01

Full Text Available Reproductive aspects of the transparent goby Aphia minuta (n=2977, 14-45 mm total length (TL were studied in Majorcan waters, western Mediterranean, during the fishing season (December to April from 1985 to 1993. Male:female sex ratio was 1:1. Size at first maturity was 38 mm TL for females and 34 mm TL for males. Oocyte size-frequency distribution indicated that A. minuta is a single spawner. Fecundity of A. minuta ranged from 935 to 2648 oocytes. The breeding season extended from December to April with a peak in March. After a single reproduction at 5-6 months of age, most of the specimens disappeared from the fishing areas. Recruitment to the fishing area occurred in late December and early January (14-24 mm TL, age 2-3 months. On the other hand, the hatch date back-calculated from the age in days and the date of capture of individuals of A. minuta during the fishing season, indicated a spawning peak in autumn (September-October, six months after the peak of observed spawning. Schools of A. minuta were detected by acoustic methods, during the fishing season (winter-spring in fishing areas (5-40 m depth, principally inside bays, and during the rest of the year (summer and autumn in deeper areas (40-90 m, outside bays, with water temperatures between 13 and 16ºC and a high seasonal productivity in each depth range. Therefore, we propose that A. minuta has two annual cohorts in the western Mediterranean, corresponding to two main spawning in spring and autumn, respectively. Life history pattern indicated that we only know the winter cohort resulting from the autumn spawning. Meanwhile the summer cohort (spring spawning grows and reproduces in deeper areas not being targeted by the fishery. Indirect validation is provided from information from other areas. The relevance of the life cycle is discussed in relation to fishery management.

Life-cycle cost assessment of seismically base-isolated structures in nuclear power plants

International Nuclear Information System (INIS)

Wang, Hao; Weng, Dagen; Lu, Xilin; Lu, Liang

2013-01-01

Highlights: • The life-cycle cost of seismic base-isolated nuclear power plants is modeled. • The change law of life-cycle cost with seismic fortification intensity is studied. • The initial cost of laminated lead rubber bearings can be expressed as the function of volume. • The initial cost of a damper can be expressed as the function of its maximum displacement and tonnage. • The use of base-isolation can greatly reduce the expected damage cost, which leads to the reduction of the life-cycle cost. -- Abstract: Evaluation of seismically base-isolated structural life-cycle cost is the key problem in performance based seismic design. A method is being introduced to address the life-cycle cost of base-isolated reinforced concrete structures in nuclear power plants. Each composition of life-cycle cost is analyzed including the initial construction cost, the isolators cost and the excepted damage cost over life-cycle of the structure. The concept of seismic intensity is being used to estimate the expected damage cost, greatly simplifying the calculation. Moreover, French Cruas nuclear power plant is employed as an example to assess its life-cycle cost, compared to the cost of non-isolated plant at the same time. The results show that the proposed method is efficient and the expected damage cost is enormously reduced because of the application of isolators, which leads to the reduction of the life-cycle cost of nuclear power plants

Implementing risk-informed life-cycle design

International Nuclear Information System (INIS)

Hill, Ralph S. III

2007-01-01

This paper describes a design process based on risk-informed probabilistic methodologies that cover a facility's life-cycle from start of conceptual design through decontamination and decommissioning. The concept uses probabilistic risk assessments to identify target reliabilities for facility systems and components. Target reliabilities are used in system and subsystem simulation analyses to determine the optimum combination of initial system and component construction reliability, maintenance frequency, and inspection frequency for both active and passive components. The target reliabilities are also used for system based code margin exchange to reduce excessive level of margins to appropriate levels resulting in a more flexible structure of codes and standards that improves facility reliability and cost. The paper includes a description of a risk informed life-cycle design process, a summary of work being done, and a discussion of work needed to implement the process. (author)

Life Cycle Assessment Of Hydrogen Production From Natural Gas Reforming Process

International Nuclear Information System (INIS)

Ozturk, M.

2010-01-01

Society has become concerned about the issues of natural resource depletion and environmental degradation. The environmental performance of products or processes has become a key issue, which is why ways to minimize the effects on the environment are investigated. The most effective tool for this purpose is called life cycle assessment (LCA). This concept considers the entire life cycle of product or process. The life cycle of a product begins with the extraction of raw materials from the earth to create the product and ends at the point when all materials are returned to the earth. LCA makes it possible to estimate the cumulative environmental impacts resulting from all stages in the product life cycle, often including impacts not considered in more traditional analyses. Therefore, LCA provides a comprehensive view of the environmental aspects of the product or process and a more accurate picture of the true environmental trade-offs in product selection. In the case of this study, life cycle assessments of hydrogen production via natural gas reforming process are investigated for environmental affect.

Menstrual cycle characteristics and reproductive hormone levels in women exposed to atrazine in drinking water.

Science.gov (United States)

Cragin, Lori A; Kesner, James S; Bachand, Annette M; Barr, Dana Boyd; Meadows, Juliana W; Krieg, Edward F; Reif, John S

2011-11-01

Atrazine is the most commonly used herbicide in the U.S. and a wide-spread groundwater contaminant. Epidemiologic and laboratory evidence exists that atrazine disrupts reproductive health and hormone secretion. We examined the relationship between exposure to atrazine in drinking water and menstrual cycle function including reproductive hormone levels. Women 18-40 years old residing in agricultural communities where atrazine is used extensively (Illinois) and sparingly (Vermont) answered a questionnaire (n=102), maintained menstrual cycle diaries (n=67), and provided daily urine samples for analyses of luteinizing hormone (LH), and estradiol and progesterone metabolites (n=35). Markers of exposures included state of residence, atrazine and chlorotriazine concentrations in tap water, municipal water and urine, and estimated dose from water consumption. Women who lived in Illinois were more likely to report menstrual cycle length irregularity (odds ratio (OR)=4.69; 95% confidence interval (CI): 1.58-13.95) and more than 6 weeks between periods (OR=6.16; 95% CI: 1.29-29.38) than those who lived in Vermont. Consumption of >2 cups of unfiltered Illinois water daily was associated with increased risk of irregular periods (OR=5.73; 95% CI: 1.58-20.77). Estimated "dose" of atrazine and chlorotriazine from tap water was inversely related to mean mid-luteal estradiol metabolite. Atrazine "dose" from municipal concentrations was directly related to follicular phase length and inversely related to mean mid-luteal progesterone metabolite levels. We present preliminary evidence that atrazine exposure, at levels below the US EPA MCL, is associated with increased menstrual cycle irregularity, longer follicular phases, and decreased levels of menstrual cycle endocrine biomarkers of infertile ovulatory cycles. Copyright © 2011 Elsevier Inc. All rights reserved.

Design for life-cycle profit with simultaneous consideration of initial manufacturing and end-of-life remanufacturing

Science.gov (United States)

Kwak, Minjung; Kim, Harrison

2015-01-01

Remanufacturing is emerging as a promising solution for achieving green, profitable businesses. This article considers a manufacturer that produces new products and also remanufactured versions of the new products that become available at the end of their life cycle. For such a manufacturer, design decisions at the initial design stage determine both the current profit from manufacturing and future profit from remanufacturing. To maximize the total profit, design decisions must carefully consider both ends of product life cycle, i.e. manufacturing and end-of-life stages. This article proposes a decision-support model for the life-cycle design using mixed-integer nonlinear programming. With an aim to maximize the total life-cycle profit, the proposed model searches for an (at least locally) optimal product design (i.e. design specifications and the selling price) for the new and remanufactured products. It optimizes both the initial design and design upgrades at the end-of-life stage and also provides corresponding production strategies, including production quantities and take-back rate. The model is extended to a multi-objective model that maximizes both economic profit and environmental-impact saving. To illustrate, the developed model is demonstrated with an example of a desktop computer.

Life cycle costs for Alaska bridges.

Science.gov (United States)

2014-08-01

A study was implemented to assist the Alaska Department of Transportation and Public Facilities (ADOT&PF) with life cycle costs for : the Alaska Highway Bridge Inventory. The study consisted of two parts. Part 1 involved working with regional offices...

Headache classification and aspects of reproductive life in young women.

Science.gov (United States)

Melhado, Eliana M; Bigal, Marcelo E; Galego, Andressa R; Galdezzani, João P; Queiroz, Luiz P

2014-01-01

To classify headaches as a function of the menstrual cycle and to contrast aspects relating to the reproductive cycle as a function of headache type. Participants responded to a structured questionnaire consisting of 44 questions. Detailed headache information, enabling the classification of headaches, and questions relating to the menstrual cycle were obtained. The sample consisted of 422 students. Menstrual headaches were experienced by 31.8%. Migraine without aura (MO) occurred in 13.3%, migraine with aura (MA) in 7.8%, and probable migraine in 6.4%. Women with MA were significantly more likely to have reached menarche at earlier ages than women without headaches (p=0.03). Use of a hormonal contraceptive was related to the function of having MA headaches or not. Most female college students are affected by menstrual headaches. Although the vast majority experience MO, other headaches also occur. Women with MA are equally likely to receive hormonal contraceptives as others.

EASEWASTE-life cycle modeling capabilities for waste management technologies

DEFF Research Database (Denmark)

Bhander, Gurbakhash Singh; Christensen, Thomas Højlund; Hauschild, Michael Zwicky

2010-01-01

Background, Aims and Scope The management of municipal solid waste and the associated environmental impacts are subject of growing attention in industrialized countries. EU has recently strongly emphasized the role of LCA in its waste and resource strategies. The development of sustainable solid...... waste management systems applying a life-cycle perspective requires readily understandable tools for modelling the life cycle impacts of waste management systems. The aim of the paper is to demonstrate the structure, functionalities and LCA modelling capabilities of the PC-based life cycle oriented...... waste management model EASEWASTE, developed at the Technical University of Denmark specifically to meet the needs of the waste system developer with the objective to evaluate the environmental performance of the various elements of existing or proposed solid waste management systems. Materials...

Models of the Organizational Life Cycle: Applications to Higher Education.

Science.gov (United States)

Cameron, Kim S.; Whetten, David A.

1983-01-01

A review of models of group and organization life cycle development is provided and the applicability of those models for institutions of higher education are discussed. An understanding of the problems and characteristics present in different life cycle stages can help institutions manage transitions more effectively. (Author/MLW)

Life cycle of Epischura baicalensis Sars (Copepoda, Calanoida) in Lake Baikal

Science.gov (United States)

Afanasyeva, E. L.

1998-06-01

Epischura baicalensis Sars is a dominant pelagic species of Lake Baikal zooplankton. This is endemic to Lake Baikal and inhabits the entire water column. It produces two generations per year: the winter-spring and the summer. These copepods develop under different ecological conditions and vary in the duration of life stages, reproduction time, maturation of sex products and adult males and females lifespan. The total life period of the animals from each generation is one year. One female can produce 10 egg sacks every 10-20 days during its life time. The ratio of males and females is 1:1. One of the most essential features of the ecology of E. baicalensis is the alteration of its mass inhabited areas during a year, as well as in day time. This is due to the need for various conditions for gonad maturation, reproduction, nourishing and protection from being consumed by planktivors.

Life cycle emissions from renewable energy technologies

International Nuclear Information System (INIS)

Bates, J.; Watkiss, P.; Thorpe, T.

1997-01-01

This paper presents the methodology used in the ETSU review, together with the detailed results for three of the technologies studied: wind turbines, photovoltaic systems and small, stand-alone solar thermal systems. These emissions are then compared with those calculated for both other renewables and fossil fuel technology on a similar life cycle basis. The life cycle emissions associated with renewable energy technology vary considerably. They are lowest for those technologies where the renewable resource has been concentrated in some way (e.g. over distance in the case of wind and hydro, or over time in the case of energy crops). Wind turbines have amongst the lowest emissions of all renewables and are lower than those for fossil fuel generation, often by over an order of magnitude. Photovoltaics and solar thermal systems have the highest life cycle emissions of all the renewable energy technologies under review. However, their emissions of most pollutants are also much lower than those associated with fossil fuel technologies. In addition, the emissions associated with PV are likely to fall further in the future as the conversion efficiency of PV cells increases and manufacturing technology switches to thin film technologies, which are less energy intensive. Combining the assessments of life cycle emissions of renewables with predictions made by the World Energy Council (WEC) of their future deployment has allowed estimates to be made of amount by which renewables could reduce the future global emissions of carbon dioxide, sulphur dioxide and nitrogen oxides. It estimated that under the WEC's 'Ecologically Driven' scenario, renewables might lead to significant reductions of between 3650 and 8375 Mt in annual CO 2 emissions depending on the fossil fuel technology they are assumed to displace. (author)

When the Seasons Don't Fit: Speedy Molt as a Routine Carry-Over Cost of Reproduction

OpenAIRE

Dietz, M.W.; Rogers, K.G.; Piersma, T.

2013-01-01

The failure of animals to fit all life-cycle stages into an annual cycle could reduce the chances of successful breeding. In some cases, non-optimal strategies will be adopted in order to maintain the life-cycle within the scope of one year. We studied trade-offs made by a High Arctic migrant shorebird, the red knot Calidris canutus islandica, between reproduction and wing feather molt carried out in the non-breeding period in the Dutch Wadden Sea. We compared primary molt duration between bi...

Life-cycle assessment of typical Portuguese cork oak woodlands.

Science.gov (United States)

González-García, Sara; Dias, Ana Cláudia; Arroja, Luis

2013-05-01

Cork forest systems are responsible for making an important economic contribution to the Mediterranean region, especially Portugal where the cork oak woodlands or montados contain about 32% of the world's area. The environmental profile derived from reproduction cork production and extraction in two Portuguese regions (Tagus valley and Alentejo) representative of the Portuguese sector were assessed in detail using the Life-Cycle Assessment (LCA) methodology from a cradle-to-gate perspective. The production line was divided into four stages considering all the processes involved: stand establishment, stand management, cork stripping and field recovery. According to the environmental results, there were remarkable differences between the two production scenarios mainly due to the intensity and repetition of forest activities even though the cork yield was reported to be the same. The management system in the Alentejo region presented the worse environmental profile in almost all the impact categories under assessment, mainly due to the shorter cycle duration of the mechanical cleaning and pruning processes. Cork stripping was identified in both scenarios as the production stage with the highest contribution to the environmental profile due to the cleaning and pruning processes. A sensitivity assessment concerning the cork yield was performed since the average production yields in the Portuguese montados are lower than the ones used in this study. Thus, if the cork yield is reduced, the environmental profile in both scenarios gets worse since almost all the forest activities involved are the same. Copyright © 2013 Elsevier B.V. All rights reserved.

Life cycle assessment: Existing building retrofit versus replacement

Science.gov (United States)

Darabi, Nura

The embodied energy in building materials constitutes a large part of the total energy required for any building (Thormark 2001, 429). In working to make buildings more energy efficient this needs to be considered. Integrating considerations about life cycle assessment for buildings and materials is one promising way to reduce the amount of energy consumption being used within the building sector and the environmental impacts associated with that energy. A life cycle assessment (LCA) model can be utilized to help evaluate the embodied energy in building materials in comparison to the buildings operational energy. This thesis takes into consideration the potential life cycle reductions in energy and CO2 emissions that can be made through an energy retrofit of an existing building verses demolition and replacement with a new energy efficient building. A 95,000 square foot institutional building built in the 1960`s was used as a case study for a building LCA, along with a calibrated energy model of the existing building created as part of a previous Masters of Building Science thesis. The chosen case study building was compared to 10 possible improvement options of either energy retrofit or replacement of the existing building with a higher energy performing building in order to see the life cycle relationship between embodied energy, operational energy, and C02 emissions. As a result of completing the LCA, it is shown under which scenarios building retrofit saves more energy over the lifespan of the building than replacement with new construction. It was calculated that energy retrofit of the chosen existing institutional building would reduce the amount of energy and C02 emissions associated with that building over its life span.

Genomic divergence and lack of introgressive hybridization between two 13-year periodical cicadas support life cycle switching in the face of climate change.

Science.gov (United States)

Koyama, Takuya; Ito, Hiromu; Fujisawa, Tomochika; Ikeda, Hiroshi; Kakishima, Satoshi; Cooley, John R; Simon, Chris; Yoshimura, Jin; Sota, Teiji

2016-11-01

Life history evolution spurred by post-Pleistocene climatic change is hypothesized to be responsible for the present diversity in periodical cicadas (Magicicada), but the mechanism of life cycle change has been controversial. To understand the divergence process of 13-year and 17-year cicada life cycles, we studied genetic relationships between two synchronously emerging, parapatric 13-year periodical cicada species in the Decim group, Magicicada tredecim and M. neotredecim. The latter was hypothesized to be of hybrid origin or to have switched from a 17-year cycle via developmental plasticity. Phylogenetic analysis using restriction-site-associated DNA sequences for all Decim species and broods revealed that the 13-year M. tredecim lineage is genomically distinct from 17-year Magicicada septendecim but that 13-year M. neotredecim is not. We detected no significant introgression between M. tredecim and M. neotredecim/M. septendecim thus refuting the hypothesis that M. neotredecim are products of hybridization between M. tredecim and M. septendecim. Further, we found that introgressive hybridization is very rare or absent in the contact zone between the two 13-year species evidenced by segregation patterns in single nucleotide polymorphisms, mitochondrial lineage identity and head width and abdominal sternite colour phenotypes. Our study demonstrates that the two 13-year Decim species are of independent origin and nearly completely reproductively isolated. Combining our data with increasing observations of occasional life cycle change in part of a cohort (e.g. 4-year acceleration of emergence in 17-year species), we suggest a pivotal role for developmental plasticity in Magicicada life cycle evolution. © 2016 John Wiley & Sons Ltd.

'A machine for recreating life': an introduction to reproduction on film.

Science.gov (United States)

Olszynko-Gryn, Jesse; Ellis, Patrick

2017-09-01

Reproduction is one of the most persistently generative themes in the history of science and cinema. Cabbage fairies, clones and monstrous creations have fascinated filmmakers and audiences for more than a century. Today we have grown accustomed not only to the once controversial portrayals of sperm, eggs and embryos in biology and medicine, but also to the artificial wombs and dystopian futures of science fiction and fantasy. Yet, while scholars have examined key films and genres, especially in response to the recent cycle of Hollywood 'mom coms', the analytic potential of reproduction on film as a larger theme remains largely untapped. This introduction to a special issue aims to consolidate a disparate literature by exploring diverse strands of film studies that are rarely considered in the same frame. It traces the contours of a little-studied history, pauses to consider in greater detail a few particularly instructive examples, and underscores some promising lines of inquiry. Along the way, it introduces the six original articles that constitute Reproduction on Film.

Life-Cycle Evaluation of Domestic Energy Systems

Science.gov (United States)

Bando, Shigeru; Hihara, Eiji

Among the growing number of environmental issues, the global warming due to the increasing emission of greenhouse gases, such as carbon dioxide CO2, is the most serious one. In order to reduce CO2 emissions in energy use, it is necessary to reduce primary energy consumption, and to replace energy sources with alternatives that emit less CO2.One option of such ideas is to replace fossil gas for water heating with electricity generated by nuclear power, hydraulic power, and other methods with low CO2 emission. It is also important to use energy efficiently and to reduce waste heat. Co-generation system is one of the applications to be able to use waste heat from a generator as much as possible. The CO2 heat pump water heaters, the polymer electrolyte fuel cells, and the micro gas turbines have high potential for domestic energy systems. In the present study, the life-cycle cost, the life-cycle consumption of primary energy and the life-cycle emission of CO2 of these domestic energy systems are compare. The result shows that the CO2 heat pump water heaters have an ability to reduce CO2 emission by 10%, and the co-generation systems also have another ability to reduce primary energy consumption by 20%.

Steam generator life cycle management challenges - on-going and new build

International Nuclear Information System (INIS)

Spekkens, P.

2009-01-01

Ontario Power Generation (OPG) is committed to the safe, reliable, and cost-effective operation of its fleet of CANDU plants. Steam Generators (SGs) are a major component of the heat transport system in these plants and maintaining their health is an essential element to achieving plant safety, reliability and economic performance. OPG has been actively engaged in formal life cycle management of its SGs for about 15 years. Over this time, we have developed stable, mature, detailed life cycle plans for each of our plants on a unit by unit, and in some cases, SG by SG, basis. These plans have been externally reviewed over the years by our regulator and by other third-party experts, and they've been acknowledged as being among the best life cycle plans anywhere. Although we are pleased that our life cycle plans are as detailed and mature as they are, we certainly aren't fully satisfied because they're not perfect. Even if they were perfect at any point in time, they wouldn't be for very long because the environment is constantly changing, both the technical environment and the business environment. This paper presents some of these challenges and offers some possible solutions or suggestions based on OPG's experience. The paper describes the background on SG life cycle management in OPG, i.e. what it is and how we do it. Then it presents challenges in the following areas: despite having some very detailed and technically strong life cycle plans, we still face some technical issues; in addition, we face challenges in integrating these plans into the overall business processes within the company; up until now, our life cycle planning has been aimed at early-and mid-life in our units. But our units are aging and we are now within sight, at least in a life cycle management sense, of a point at which decisions need to be made on refurbishment, life extension or retirement of the units. We need to adjust our life cycle management approach as we approach those major

Life Cycle Assessment of Wall Systems

Science.gov (United States)

Ramachandran, Sriranjani

Natural resource depletion and environmental degradation are the stark realities of the times we live in. As awareness about these issues increases globally, industries and businesses are becoming interested in understanding and minimizing the ecological footprints of their activities. Evaluating the environmental impacts of products and processes has become a key issue, and the first step towards addressing and eventually curbing climate change. Additionally, companies are finding it beneficial and are interested in going beyond compliance using pollution prevention strategies and environmental management systems to improve their environmental performance. Life-cycle Assessment (LCA) is an evaluative method to assess the environmental impacts associated with a products' life-cycle from cradle-to-grave (i.e. from raw material extraction through to material processing, manufacturing, distribution, use, repair and maintenance, and finally, disposal or recycling). This study focuses on evaluating building envelopes on the basis of their life-cycle analysis. In order to facilitate this analysis, a small-scale office building, the University Services Building (USB), with a built-up area of 148,101 ft2 situated on ASU campus in Tempe, Arizona was studied. The building's exterior envelope is the highlight of this study. The current exterior envelope is made of tilt-up concrete construction, a type of construction in which the concrete elements are constructed horizontally and tilted up, after they are cured, using cranes and are braced until other structural elements are secured. This building envelope is compared to five other building envelope systems (i.e. concrete block, insulated concrete form, cast-in-place concrete, steel studs and curtain wall constructions) evaluating them on the basis of least environmental impact. The research methodology involved developing energy models, simulating them and generating changes in energy consumption due to the above mentioned

Life cycle size dynamics in Didymosphenia geminata (Bacillariophyceae).

Science.gov (United States)

Bishop, Ian W; Spaulding, Sarah A

2017-06-01

Didymosphenia geminata has received a great deal of attention in the last 25 years, and considerable effort has gone into determining the origin, ecological impact, and economic consequences of its invasive behavior. While environmental conditions are a controlling influence in distribution, the extreme success of the species may be tied to its basic biology and life history. Little is known, however, about population dynamics, size restoration and reproduction of D. geminata. The objective of this study was to determine the temporal patterns in cell size frequency, size restoration strategy, and synchronization of life cycles between populations in close proximity. We implemented FlowCam technology to measure the length of more than 100,000 D. geminata cells from two sites in South Boulder Creek, Colorado over 1 year. We applied finite mixture modeling to uncover temporal patterns in size distribution. Our results show that collections of D. geminata exhibited a complex, multimodal size distribution, almost always containing four overlapping age cohorts. We failed to observe direct visual evidence of the sexual phase. Multiple abrupt and directional shifts in size distribution, however, were documented providing conclusive evidence of cell size restoration. Lastly, nodules in close proximity were asynchronous with respect to size frequency profiles and size diminution, highlighting the relevance of spatial heterogeneity in in situ diatom size dynamics. This study is the first to document the complexity of diatom cell size distribution in a lotic system, size restoration in D. geminata, and the variability in rates of size reduction at microhabitat spatial scales. © 2017 Phycological Society of America.

Cost estimation and management over the life cycle of metallurgical ...

African Journals Online (AJOL)

This study investigates whether all expected costs over the life cycle of metallurgical research projects are included in initial, normal and fi nal cost estimates, and whether these costs are managed throughout a project's life cycle since there is not enough emphasis on the accurate estimation of costs and their management ...

FileNet's BPM life-cycle support

NARCIS (Netherlands)

Netjes, M.; Reijers, H.A.; Aalst, van der W.M.P.

2006-01-01

Business Process Management (BPM) systems provide a broad range of facilities to enact and manage operational business processes. Ideally, these systems should provide support for the complete BPM life-cycle: (re)design, configuration, execution, control, and diagnosis of processes. In the research

The LifeCycle model

DEFF Research Database (Denmark)

Krink, Thiemo; Løvbjerg, Morten

2002-01-01

genetic algorithms (GAs), particle swarm optimisation (PSOs), and stochastic hill climbing to create a generally well-performing search heuristics. In the LifeCycle model, we consider candidate solutions and their fitness as individuals, which, based on their recent search progress, can decide to become...... either a GA individual, a particle of a PSO, or a single stochastic hill climber. First results from a comparison of our new approach with the single search algorithms indicate a generally good performance in numerical optimization....

LIFE CYCLE DESIGN OF A FUEL TANK SYSTEM

Science.gov (United States)

This life cycle design (LCD) project was a collaborative effort between the National Pollution Prevention Center at the University of Michigan, General Motors (GM), and the U.S. Environmental Protection Agency (EPA). The primary objective of this project was to apply life cyc...

Temperature-dependent development and reproductive traits of Tetranychus macfarlanei (Acari: Tetranychidae)

DEFF Research Database (Denmark)

Ullah, Mohammad Shaef; Haque, Md. Ahsanul; Nachman, Gösta

2012-01-01

Development and reproductive traits of Tetranychus macfarlanei Baker & Pritchard (Acari: Tetranychidae) were investigated on kidney bean, Phaseolus vulgaris L., at eleven constant temperatures. Tetranychus macfarlanei was able to develop and complete its life cycle at temperatures ranging from 17...

Designer and constructor practices to ensure life cycle performance.

OpenAIRE

Shelton, Joelle L.

1998-01-01

CIVINS (Civilian Institutions) Thesis document Technology advances of the last few decades, in such areas as computing and construction materials, have inspired many attempts to improve the construction process. Many of these attempts focus on reducing costs and improving functionality, such as life cycle cost analysis and value engineering, while others, such as design-build, focus on specific phases of the life cycle. Other factors such as declining productivity, the quantity of construc...

Life Cycle Assessment of fresh dairy packaging at ELOPAK

OpenAIRE

Ruttenborg, Vegard

2017-01-01

Nearly all food and drink products require some packaging, and the impact from production and consumption is causing a strain on the environment. To counteract the bad effects, business is emphasizing the environmental performance of products and therefore utilising Life Cycle Assessment as a tool to quantify the environmental impacts from a products life cycle. Elopak, which is an International supplier of paper-based packaging for liquid food, is a such company. This thesis i...

Life cycle impacts of manufacturing redwood decking in Northern California

Science.gov (United States)

Richard D. Bergman; Elaine Oneil; Ivan L. Eastin; Han-Sup Han

2014-01-01

Awareness of the environmental footprint of building construction and use has led to increasing interest in green building. Defining a green building is an evolving process with life cycle inventory and life cycle impact assessment (LCIA) emerging as key tools in that evolution and definition process. This study used LCIA to determine the environmental footprint...

Determination of HSE program proportional to organizational Corporate life cycles

Directory of Open Access Journals (Sweden)

2013-02-01

Result: Corporate life cycles questionnaire with 10 indicators, available HSE programs score cards with 47 indicators according to OGP model and corporate life cycles proper programs table were results of this article. .Conclusion: The results showedweakness in the HSE programs implementation.Therefore, we offered the management methods like upgrade HSE culture and leadership for modification.

Reproductive strategies in males of the world's southernmost lizards.

Science.gov (United States)

Fernández, Jimena B; Medina, Marlin; Kubisch, Erika L; Scolaro, José A; Ibargüengoytía, Nora R

2017-03-01

Reproductive and life history patterns in reptiles are tightly related to the environmental conditions, so male reproductive cycles have been historically characterized as continuous, for tropical lizards, or seasonal, for temperate lizards. However, males of Liolaemus and Phymaturus lizards (Liolaemidae), from cold temperate climates of high altitudes or latitudes in Argentina and Chile, have developed a variety of reproductive cycles to coordinate with the short female reproductive season and to deal with the low frequency of reproductive females in the population. Using gonadal histology and morphological analysis, we describe the male reproductive biology, fat storage and sexual dimorphism of the viviparous lizards Liolaemus sarmientoi and Liolaemus magellanicus that inhabit an austral grass steppe at 51°S, in the southern limit of the American continent. Males of L. sarmientoi and L. magellanicus are reproductively available during the entire activity season of approximately 5 months. In addition, males of both species exhibit greater body sizes than females in morphological variables relevant in sexual selection. Meanwhile, females of both species exhibit larger inter-limb length than conspecific males, which suggests fecundity selection to increase space for a larger litter size. The continuous sperm production throughout the activity season allows these liolaemids to mate at any time when females ovulate, representing a selective advantage to deal with the short activity season and the adversities of the cold environment they inhabit. © 2016 International Society of Zoological Sciences, Institute of Zoology/Chinese Academy of Sciences and John Wiley & Sons Australia, Ltd.

Product Life Cycle - Quality Management Issues

DEFF Research Database (Denmark)

Alting, Leo; Majstorovic, Vidosav D.

2004-01-01

The strategic goal of our country is European and world integration. Within this context the management of sustainable development considered from the aspect of product’s life cycle and its quality management represents a real challenge for researchers, economy and educational system. The aim...

Life cycle characteristics of SME’s

NARCIS (Netherlands)

Masurel, E.; Montfort, van K.

2006-01-01

Our study of professional services firms clearly revealed that firms change over the course of their life cycles. During the first three stages, diversification in sales, the differentiation in labor force, and the level of labor productivity increase. In the last stage, diversification in sales,

Replacement and inspection policies for products with random life cycle

International Nuclear Information System (INIS)

Yun, Won Young; Nakagawa, Toshio

2010-01-01

In this paper, we consider maintenance policies for products in which the economical life cycle of products is a random variable. First, we study a periodic replacement policy with minimal repair. The system is minimally repaired at failure and is replaced by new one at age T (periodic replacement policy with minimal repair of Barlow and Hunter). The expected present value of total maintenance cost of products with random life cycle is obtained and the optimal replacement interval minimizing the cost is found. Second, we consider an inspection policy for products with random life cycle to detect the system failure. The expected total cost is obtained and the optimal inspection interval is found. Numerical examples are also included.

Security Risks: Management and Mitigation in the Software Life Cycle

Science.gov (United States)

Gilliam, David P.

2004-01-01

A formal approach to managing and mitigating security risks in the software life cycle is requisite to developing software that has a higher degree of assurance that it is free of security defects which pose risk to the computing environment and the organization. Due to its criticality, security should be integrated as a formal approach in the software life cycle. Both a software security checklist and assessment tools should be incorporated into this life cycle process and integrated with a security risk assessment and mitigation tool. The current research at JPL addresses these areas through the development of a Sotfware Security Assessment Instrument (SSAI) and integrating it with a Defect Detection and Prevention (DDP) risk management tool.

Assessing social impacts in a life cycle perspective-Lessons learned

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky; Jørgensen, Andreas; Dreyer, Louise Camilla

2008-01-01

In our globalised economy, important stakeholder groups nowadays hold companies responsible for the social impacts they cause in their product chain through activities like child labour, corruption or discrimination of employees. Many companies thus see themselves in need of a tool which can help...... LCA methodology supplements the traditional environment-oriented LCA and the life cycle costing tools in support of sustainability management addressing all three pillars of sustainability: people, planet and profit....... them make informed decisions about their social impacts throughout the life cycle of their products. The paper presents lessons learned from four years of work with industry on development of a methodology for social Life Cycle Assessment and implementation in the industrial product chain. The Social...

A life cycle assessment of destruction of ammunition

International Nuclear Information System (INIS)

Alverbro, K.; Bjoerklund, A.; Finnveden, G.; Hochschorner, E.; Haegvall, J.

2009-01-01

The Swedish Armed Forces have large stocks of ammunition that were produced at a time when decommissioning was not considered. This ammunition will eventually become obsolete and must be destroyed, preferably with minimal impact on the environment and in a safe way for personnel. The aim of this paper is to make a comparison of the environmental impacts in a life cycle perspective of three different methods of decommissioning/destruction of ammunition, and to identify the environmental advantages and disadvantages of each of these destruction methods: open detonation; static kiln incineration with air pollution control combined with metal recycling, and a combination of incineration with air pollution control, open burning, recovery of some energetic material and metal recycling. Data used are for the specific processes and from established LCA databases. Recycling the materials in the ammunition and minimising the spread of airborne pollutants during incineration were found to be the most important factors affecting the life cycle environmental performance of the compared destruction methods. Open detonation with or without metal recycling proved to be the overall worst alternative from a life cycle perspective. The results for the static kiln and combination treatment indicate that the kind of ammunition and location of the destruction plant might determine the choice of method, since the environmental impacts from these methods are of little difference in the case of this specific grenade. Different methods for destruction of ammunition have previously been discussed from a risk and safety perspective. This is however to our knowledge the first study looking specifically on environmentally aspect in a life cycle perspective.

Stable transfection of Eimeria intestinalis and investigation of its life cycle, reproduction and immunogenicity

Directory of Open Access Journals (Sweden)

Tuanyuan eShi

2016-05-01

Full Text Available Rabbit coccidiosis, caused by infection of Eimeria spp. is one of the most severe parasitic diseases in rabbits. E. intestinalis is one of the most immunogenic species in rabbit coccidia. Due to the lack of genomic information and unsuccessful in vitro cultivation, genetic manipulation of rabbit coccidia lagged behind other apicomplexan parasites. Using regulatory sequences from E. tenella, we obtained a transgenic line of E. intestinalis expressing yellow fluorescent protein (YFP. YFP was continuously expressed throughout the whole life cycle. Morphological features of E. intestinalis in the different developmental stages were dynamically observed with the transgenic line. Some important features in the endogenous development stages were observed. Trophozoites were found as early as 4 h post inoculation. Two-types of schizonts and merozoites were observed in first three of the four schizogonies. Beside jejunum and ileum, gametogony stage and oocysts were also found in the duodenum and vermiform appendix. In addition, the transgenic strain was highly immunogenic but less pathogenic than the wild type. Considering the high immunogenicity of E. intestinalis and amenability to transfection with foreign genes, transgenic E. intestinalis could be a promising oral eukaryotic vaccine vector.

Life cycles of energetic systems

International Nuclear Information System (INIS)

Adnot, Jerome; Marchio, Dominique; Riviere, Philippe; Duplessis, B.; Rabl, A.; Glachant, M.; Aggeri, F.; Benoist, A.; Teulon, H.; Daude, J.

2012-01-01

This collective publication aims at being a course for students in engineering of energetic systems, i.e. at learning how to decide to accept or discard a project, to select the most efficient system, to select the optimal system, to select the optimal combination of systems, and to classify independent systems. Thus, it presents methods to analyse system life cycle from an energetic, economic and environmental point of view, describes how to develop an approach to the eco-design of an energy consuming product, how to understand the importance of hypotheses behind abundant and often contradicting publicised results, and to be able to criticise or to put in perspective one's own analysis. The first chapters thus recall some aspects of economic calculation, introduce the assessment of investment and exploitation costs of energetic systems, describe how to assess and internalise environmental costs, present the territorial carbon assessment, discuss the use of the life cycle assessment, and address the issue of environmental management at a product scale. The second part proposes various case studies: an optimal fleet of thermal production of electric power, the eco-design of a refrigerator, the economic and environmental assessment of wind farms

Advancing life cycle economics in the Nordic countries

DEFF Research Database (Denmark)

Haugbølle, Kim; Hansen, Ernst Jan de Place

2005-01-01

Advancing construction and facilities management requires the ability to estimate and evaluate the economic consequences of decisions in a lifetime perspective. A survey of state-of-the-art on life cycle economics in the Nordic countries showed that, despite a number of similarities, no strong...... that the configuration of the roles as client, owner and user is indicative of a client's interest in life cycle economics. Second, a proposal for a common Nordic cost classification was put forward. Third, it was argued that there is a strong need to develop tools and methodologies to depict the cost/value ratio...

The life cycle rebound effect of air-conditioner consumption in China

International Nuclear Information System (INIS)

Liu, Jingru; Sun, Xin; Lu, Bin; Zhang, Yunkun; Sun, Rui

2016-01-01

Highlights: • Develop a life cycle rebound effect model. • Assess the life cycle rebound effect of Chinese room air conditioners. • Conduct a questionnaire to assess the consumption behavior of Chinese room air conditioners. • Rebound effect should be considered by energy policy makers. - Abstract: Governments worldwide are attempting to reduce energy consumption and environmental pollution by confronting environmental problems and adopting more energy-efficient products. However, because of the rebound effect, energy-saving targets cannot always be fully achieved, and sometimes greater energy consumption is generated. Research on the rebound effect from the perspective of industrial ecology considers not only direct energy consumption but also its life cycle negative impacts on the environment with China’s rapid economic development and simultaneously improving quality of life, the ownership of room air conditioners (RACs) has increased more than three hundred times, and air conditioners’ energy consumption has increased one thousand times over the last twenty years. The Air Conditioner Energy Efficiency Standard is one of the most important measures in China for reducing the amount of energy consumed by RACs. This paper introduces a life cycle based method to estimate the rebound effect of Chinese RACs consumption. This model provides a product’s life-cycle view to assess the rebound effect, considering the contribution of both producer and consumer. Based on the established life cycle rebound effect model, we compared urban household RAC consumption behaviour before and after the launch of the Air Conditioner Energy Efficiency Standard. A rebound effect in RAC consumption was found that there was a longer daily usage period in the household as air conditioner efficiency levels improved. The life cycle rebound effect of household air-conditioner consumption was calculated to be 67%. The main conclusion obtained from this study is that policies and

The software life cycle

CERN Document Server

Ince, Darrel

1990-01-01

The Software Life Cycle deals with the software lifecycle, that is, what exactly happens when software is developed. Topics covered include aspects of software engineering, structured techniques of software development, and software project management. The use of mathematics to design and develop computer systems is also discussed. This book is comprised of 20 chapters divided into four sections and begins with an overview of software engineering and software development, paying particular attention to the birth of software engineering and the introduction of formal methods of software develop

Life Cycle Management at Brødrene Hartmann A/S - strategy,- organisation and implementation

DEFF Research Database (Denmark)

Pedersen, Claus Stig; Alting, Leo; Mortensen, Anna Lise

1997-01-01

decisionmaking is under development.The implementation of life cycle management in Hartmann is organised with respect to the divisional areas: strategic management, product development, purchase, production, sale and distribution. The implementation of life cycle managment is assisted by tools to support...... decision making. The tools are developed in coorporation with the Department of Manufacturing Engineering at the Technical University of Denmark.This paper presents- The Hartmann environmental strategy, based on the life cycle concept- Experiences and results from developing a life cycle orientated...... organisation- Experiences and results from developing and implementing tools for life cycle management...

Development of high-rise buildings: digitalization of life cycle management

Directory of Open Access Journals (Sweden)

Gusakova Elena

2018-01-01

Full Text Available The analysis of the accumulated long-term experience in the construction and operation of high-rise buildings reveals not only the engineering specificity of such projects, but also systemic problems in the field of project management. Most of the project decisions are made by the developer and the investor in the early stages of the life cycle - from the acquisition of the site to the start of operation, so most of the participants in the construction and operation of the high-rise building are far from the strategic life-cycle management of the project. The solution of these tasks due to the informatization of management has largely exhausted its efficiency resource. This is due to the fact that the applied IT-systems automated traditional "inherited" processes and management structures, and, in addition, they were focused on informatization of the activities of the construction company, rather than the construction project. Therefore, in the development of high-rise buildings, the tasks of researching approaches and methods for managing the full life cycle of projects that will improve their competitiveness become topical. For this purpose, the article substantiates the most promising approaches and methods of informational modeling of high-rise construction as a basis for managing the full life cycle of this project. Reengineering of information interaction schemes for project participants is considered; formation of a unified digital environment for the life cycle of the project; the development of systems for integrating data management and project management.

Development of high-rise buildings: digitalization of life cycle management

Science.gov (United States)

Gusakova, Elena

2018-03-01

The analysis of the accumulated long-term experience in the construction and operation of high-rise buildings reveals not only the engineering specificity of such projects, but also systemic problems in the field of project management. Most of the project decisions are made by the developer and the investor in the early stages of the life cycle - from the acquisition of the site to the start of operation, so most of the participants in the construction and operation of the high-rise building are far from the strategic life-cycle management of the project. The solution of these tasks due to the informatization of management has largely exhausted its efficiency resource. This is due to the fact that the applied IT-systems automated traditional "inherited" processes and management structures, and, in addition, they were focused on informatization of the activities of the construction company, rather than the construction project. Therefore, in the development of high-rise buildings, the tasks of researching approaches and methods for managing the full life cycle of projects that will improve their competitiveness become topical. For this purpose, the article substantiates the most promising approaches and methods of informational modeling of high-rise construction as a basis for managing the full life cycle of this project. Reengineering of information interaction schemes for project participants is considered; formation of a unified digital environment for the life cycle of the project; the development of systems for integrating data management and project management.

Research on development model of nuclear component based on life cycle management

International Nuclear Information System (INIS)

Bao Shiyi; Zhou Yu; He Shuyan

2005-01-01

At present the development process of nuclear component, even nuclear component itself, is more and more supported by computer technology. This increasing utilization of the computer and software has led to the faster development of nuclear technology on one hand and also brought new problems on the other hand. Especially, the combination of hardware, software and humans has increased nuclear component system complexities to an unprecedented level. To solve this problem, Life Cycle Management technology is adopted in nuclear component system. Hence, an intensive discussion on the development process of a nuclear component is proposed. According to the characteristics of the nuclear component development, such as the complexities and strict safety requirements of the nuclear components, long-term design period, changeable design specifications and requirements, high capital investment, and satisfaction for engineering codes/standards, the development life-cycle model of nuclear component is presented. The development life-cycle model is classified at three levels, namely, component level development life-cycle, sub-component development life-cycle and component level verification/certification life-cycle. The purposes and outcomes of development processes are stated in detailed. A process framework for nuclear component based on system engineering and development environment of nuclear component is discussed for future research work. (authors)

CORE COMPETENCIES AND PHASES OF THE ORGANIZATIONAL LIFE CYCLE

OpenAIRE

Ahmed, Selma Zone Fekih; Koubaa, Manel Belguith

2013-01-01

Organizations evolve according to well-defined phases during which it must raise some competencies more than others. This study discusses the importance of core competencies according to the phases of the life cycle of the organization. In this research, we mobilize the core competencies approach to explore the competence required at each stage of the organizational life cycle. The quantitative study of 50 Tunisian companies operating in the food sector shows that the importance of core ...

Sensitivity analysis in life cycle assessment

NARCIS (Netherlands)

Groen, E.A.; Heijungs, R.; Bokkers, E.A.M.; Boer, de I.J.M.

2014-01-01

Life cycle assessments require many input parameters and many of these parameters are uncertain; therefore, a sensitivity analysis is an essential part of the final interpretation. The aim of this study is to compare seven sensitivity methods applied to three types of case stud-ies. Two

Using Age-Based Life History Data to Investigate the Life Cycle and Vulnerability of Octopus cyanea

Science.gov (United States)

Herwig, Jade N.; Depczynski, Martial; Roberts, John D.; Semmens, Jayson M.; Gagliano, Monica; Heyward, Andrew J.

2012-01-01

Octopus cyanea is taken as an unregulated, recreationally fished species from the intertidal reefs of Ningaloo, Western Australia. Yet despite its exploitation and importance in many artisanal fisheries throughout the world, little is known about its life history, ecology and vulnerability. We used stylet increment analysis to age a wild O. cyanea population for the first time and gonad histology to examine their reproductive characteristics. O. cyanea conforms to many cephalopod life history generalisations having rapid, non-asymptotic growth, a short life-span and high levels of mortality. Males were found to mature at much younger ages and sizes than females with reproductive activity concentrated in the spring and summer months. The female dominated sex-ratios in association with female brooding behaviours also suggest that larger conspicuous females may be more prone to capture and suggests that this intertidal octopus population has the potential to be negatively impacted in an unregulated fishery. Size at age and maturity comparisons between our temperate bordering population and lower latitude Tanzanian and Hawaiian populations indicated stark differences in growth rates that correlate with water temperatures. The variability in life history traits between global populations suggests that management of O. cyanea populations should be tailored to each unique set of life history characteristics and that stylet increment analysis may provide the integrity needed to accurately assess this. PMID:22912898

Reproductive effects on skeletal health in Shuar women of Amazonian Ecuador: a life history perspective.

Science.gov (United States)

Madimenos, Felicia C; Snodgrass, J Josh; Liebert, Melissa A; Cepon, Tara J; Sugiyama, Lawrence S

2012-01-01

Clinical and epidemiological research suggest that bone mineral density (BMD) in women is shaped by various reproductive factors such as parity and lactation patterns. However, the extent of these effects on BMD remains unclear because of contradictory findings and a focus on industrialized populations. Because fertility patterns in these groups are vastly different than those of women from non-Western, subsistence populations, our current understanding of the reproductive effects on skeletal health is incomplete. Using a life history perspective, this study examines the relationship between reproductive factors and bone density among women from the Indigenous Shuar population, an Amazonian Ecuadorian forager-horticulturalist group. This preliminary, cross-sectional study included 130 premenopausal and postmenopausal women (14-86 years old) from the Morona-Santiago region of Ecuador. Anthropometrics were recorded, as was estimated BMD using a calcaneal ultrasonometer. A reproductive history questionnaire was administered that included questions regarding menarche, parity, lactation patterns, and menopause. Among postmenopausal women, early menarche and greater stature were significantly associated with higher bone density values. Among premenopausal women, few significant relationships between bone values and reproductive variables were documented; effects of lactation appeared to be transient and restored following weaning. Although preliminary and not based on longitudinal data, these findings suggest that the effects of reproduction are transient as the system of calcium homeostasis in premenopausal women efficiently restores the bone loss that results from metabolically active reproductive states. Further, this research suggests that the timing of early life history events may canalize bone density phenotype. Copyright © 2012 Wiley Periodicals, Inc.

Rise and fall: two sides of a coin of middle aged women's perceptions of reproductive: a qualitative study.

Science.gov (United States)

Reyhani, Mitra; Kazemi, Ashraf; Keshvari, Mahrokh

2018-02-02

The present study was conducted to determine the perceptions of middle-aged women of reproductive changes. The present study was a qualitative research with a content analysis approach. The participants were 30 middle-aged women whose perceptions of reproductive changes had been collected on in-depth semi-structured interviews. The data were analyzed using the Graneheim and Lundman's inductive content analysis method. The main themes extracted from the data were a sense of "fall" and "the beginning of a new life cycle." A feeling of fall was formed from the subthemes "deterioration of youth," "the dusk of femininity," and "fade-out of the gender roles." The theme "beginning of a new life cycle" was formed from the subthemes of "acceptance," "sophistication," and "maturity." Middle-aged women had a wide range of emotions experienced from the reproductive changes ranging from a feeling of decline to that of excellence and rise.

Stereotypes of women in different stages of their reproductive life: data from Mexico and the United States.

Science.gov (United States)

Marván, Ma Luisa; Islas, Martha; Vela, Laura; Chrisler, Joan C; Warren, Elyse A

2008-08-01

College students from Mexico and the United States (n = 349) were surveyed to explore stereotypes regarding women in different menstrual cycle phases and other stages of reproductive life. Participants from both countries defined a premenstrual or menstrual woman as irritable and moody and a menopausal woman as old and irritable. A woman with a hysterectomy was defined as sad, and only Americans used other words that did not have any negative connotation. Participants used some positive adjectives to describe other stages. For example, a pregnant woman was defined as happy, but only by Mexicans. Finally, a woman with a young baby was defined in both countries as happy; however, Americans implied that having a baby is complicated. The findings are discussed in light of sociocultural differences and similarities.

Conceptual Framework To Extend Life Cycle Assessment ...

Science.gov (United States)

Life Cycle Assessment (LCA) is a decision-making tool that accounts for multiple impacts across the life cycle of a product or service. This paper presents a conceptual framework to integrate human health impact assessment with risk screening approaches to extend LCA to include near-field chemical sources (e.g., those originating from consumer products and building materials) that have traditionally been excluded from LCA. A new generation of rapid human exposure modeling and high-throughput toxicity testing is transforming chemical risk prioritization and provides an opportunity for integration of screening-level risk assessment (RA) with LCA. The combined LCA and RA approach considers environmental impacts of products alongside risks to human health, which is consistent with regulatory frameworks addressing RA within a sustainability mindset. A case study is presented to juxtapose LCA and risk screening approaches for a chemical used in a consumer product. The case study demonstrates how these new risk screening tools can be used to inform toxicity impact estimates in LCA and highlights needs for future research. The framework provides a basis for developing tools and methods to support decision making on the use of chemicals in products. This paper presents a conceptual framework for including near-field exposures into Life Cycle Assessment using advanced human exposure modeling and high-throughput tools

Application of Remote Condition Monitoring in Different Rolling Stock Life Cycle Phases

NARCIS (Netherlands)

Mooren Ceng, F.P.J.H.; van Dongen, Leonardus Adriana Maria

2013-01-01

NedTrain is the Netherlands Railway's subsidiary responsible for rolling stock maintenance. The life cycle is 30-40 years where the asset condition is maintained to meet it's performance requirements and is enhanced to meet the customer expectations through it's life. The life cycle costs are

The reproductive biology and early life ecology of a common Caribbean brain coral, Diploria labyrinthiformis (Scleractinia: Faviinae)

Science.gov (United States)

Chamberland, Valérie F.; Snowden, Skylar; Marhaver, Kristen L.; Petersen, Dirk; Vermeij, Mark J. A.

2017-03-01

Despite the fact that most of the severe demographic bottlenecks in coral populations occur during their earliest life stages, information on the reproductive biology and early life history traits of many coral species is limited and often inferred from adult traits only. This study reports on several atypical aspects of the reproductive biology and early life ecology of the grooved brain coral, Diploria labyrinthiformis (Linnaeus, 1758), a conspicuous reef-building species on Caribbean reefs. The timing of gamete release of D. labyrinthiformis was monitored in Curaçao over eight consecutive months, and embryogenesis, planulae behavior, and settlement rates were observed and quantified. We further studied growth and symbiont acquisition in juvenile D. labyrinthiformis for 3.5 yr and compared settler survival under ambient and nutrient-enriched conditions in situ. Notably, D. labyrinthiformis reproduced during daylight hours in six consecutive monthly spawning events between May and September 2013, with a peak in June. This is the largest number of reproductive events per year ever observed in a broadcast-spawning Caribbean coral species. In settlement experiments, D. labyrinthiformis planulae swam to the bottom of culture containers 13 h after spawning and rapidly settled when provided with settlement cues (42% within 14 h). After 5 months, the survival and growth rates of settled juveniles were 3.7 and 1.9 times higher, respectively, for settlers that acquired zooxanthellae within 1 month after settlement, compared to those that acquired symbionts later on. Nutrient enrichment increased settler survival fourfold, but only for settlers that had acquired symbionts within 1 month after settlement. With at least six reproductive events per year, a short planktonic larval phase, high settlement rates, and a positive response to nutrient enrichment, the broadcast-spawning species D. labyrinthiformis displays a range of reproductive and early life-history traits that

A comparison of major petroleum life cycle models | Science ...

Science.gov (United States)

Many organizations have attempted to develop an accurate well-to-pump life cycle model of petroleum products in order to inform decision makers of the consequences of its use. Our paper studies five of these models, demonstrating the differences in their predictions and attempting to evaluate their data quality. Carbon dioxide well-to-pump emissions for gasoline showed a variation of 35 %, and other pollutants such as ammonia and particulate matter varied up to 100 %. Differences in allocation do not appear to explain differences in predictions. Effects of these deviations on well-to-wheels passenger vehicle and truck transportation life cycle models may be minimal for effects such as global warming potential (6 % spread), but for respiratory effects of criteria pollutants (41 % spread) and other impact categories, they can be significant. A data quality assessment of the models’ documentation revealed real differences between models in temporal and geographic representativeness, completeness, as well as transparency. Stakeholders may need to consider carefully the tradeoffs inherent when selecting a model to conduct life cycle assessments for systems that make heavy use of petroleum products. This is a qualitative and quantitative comparison of petroleum LCA models intended for an expert audience interested in better understanding the data quality of existing petroleum life cycle models and the quantitative differences between these models.

Analysis of environmental impact phase in the life cycle of a nuclear power plant

International Nuclear Information System (INIS)

Hernandez del M, C.

2015-01-01

The life-cycle analysis covers the environmental aspects of a product throughout its life cycle. The focus of this study was to apply a methodology of life-cycle analysis for the environmental impact assessment of a nuclear power plant by analyzing international standards ISO 14040 and 14044. The methodology of life-cycle analysis established by the ISO 14044 standard was analyzed, as well as the different impact assessment methodologies of life cycle in order to choose the most appropriate for a nuclear power plant; various tools for the life-cycle analysis were also evaluated, as is the use of software and the use of databases to feed the life cycle inventory. The functional unit chosen was 1 KWh of electricity, the scope of analysis ranging from the construction and maintenance, disposal of spent fuel to the decommissioning of the plant, the manufacturing steps of the fuel were excluded because in Mexico is not done this stage. For environmental impact assessment was chosen the Recipe methodology which evaluates up to 18 impact categories depending on the project. In the case of a nuclear power plant were considered only categories of depletion of the ozone layer, climate change, ionizing radiation and formation of particulate matter. The different tools for life-cycle analysis as the methodologies of impact assessment of life cycle, different databases or use of software have been taken according to the modeling of environmental sensitivities of different regions, because in Mexico the methodology for life-cycle analysis has not been studied and still do not have all the tools necessary for the evaluation, so the uncertainty of the data supplied and results could be higher. (Author)

Gametogenesis and reproductive cycle of Melanorivulus aff. punctatus (Boulenger, 1895 (Cyprinodontiformes, Rivulidae in Chapada dos Guimarães, Mato Grosso, Brazil

Directory of Open Access Journals (Sweden)

Monica Cassel

Full Text Available The comprehension of the reproductive cycle allows to understand which are the morphological changes that develop in the gonad during this interval. Thus, many studies have been undertaken in order to describe and classify the stages of gonadal development and reproductive status of Neotropical fishes. For this purpose, specimens of Melanorivulus aff. punctatus were collected in a permanent dam in Chapada dos Guimarães, Mato Grosso, Brazil. The gonads were prepared for analysis by light microscopy. The oogenesis and spermatogenesis have been described, characterizing the stages of gonadal development, together with assessments of the gonadosomatic ratio, germ cell count and verification of variation of mature oocytes in females. Throughout the year the male gonads presented themselves as capable of reproducing, characterized by the presence of undifferentiated and differentiated spermatogonia, spermatocytes organized into cysts, spermatids in cysts whose wall was thicker and the spermatozoa was free in the lumen and the duct. This can indicate a continuous reproductive cycle with split spermiation. The females had gonads in the development stage from May to September with undifferentiated and differentiated oogonias and early oocytes always facing the lumen, abundant pre-vitellogenic and vitellogenic oocytes and some atresias. In the phase capable of spawning, observed from October to March, the mature oocytes are abundant, there are many post-ovulatory complexes and some atresia in advanced stage. The regression, observed in some individuals from February to April, is characterized by ovaries with many atresias and post-ovulatory complexes. The same results were found in the quantitative assessments. Therefore, it may be characterized as discontinuous cycle with split spawning. Thus, the reproductive cycle of this species can be characterized as continuous for males and discontinuous for females, which have a most intense phase of reproduction

Safe and effective nuclear power plant life cycle management towards decommissioning

International Nuclear Information System (INIS)

2002-08-01

The objective of this publication is to promote and communicate the need for a longer-term perspective among senior managers and policy or strategy makers for decisions that have the potential to affect the life cycle management of a nuclear power plant including decommissioning. The following sections provide practical guidance in the subject areas that might have the potential to have such an impact. The publication should be used as an aid to help strategic planning take place in an informed way through the proper consideration of any longer-term decisions to enforce recognition of the point that decommissioning is a part of the whole life cycle of a nuclear power plant. The guidance contained in this publication is relevant to all life cycle stages of a nuclear power plant, with particular emphasis on how these decisions have the potential to impact effective decommissioning. The intended users of this publication are: Strategic decision makers within a Utility through all the various life cycle stages; The senior representatives of the owners of a nuclear power plant. This publication is divided into two basic sections. Section 2 provides guidance on the topics considered generic inputs to plant life cycle management and Section 3 provides guidance on the topics that contribute to effective decommissioning

LCIA framework and cross-cutting issues guidance within the UNEP/SETAC Life Cycle Initiative

Science.gov (United States)

Increasing needs for decision support and advances in scientific knowledge within life cycle assessment (LCA) led to substantial efforts to provide global guidance on environmental life cycle impact assessment (LCIA) indicators under the auspices of the UNEP-SETAC Life Cycle Init...

FUNDAMENTALS OF LIFE CYCLE ASSESSMENT AND OFF-THE-SHELF SOFTWARE DEMONSTRATION

Science.gov (United States)

As the name implies, Life Cycle Assesssment (LCA) evaluates the entire life cycle of a product, process, activity, or service, not just simple economics at the time of delivery. This course on LCA covers the following issues:Basic principles of LCA for use in producing, des...

An Integrated Framework for Life Cycle Engineering

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky; Herrmann, Christoph; Kara, Sami

2017-01-01

Life Cycle Engineering (LCE) was introduced as a concept more than 24 years ago in order to address emerging concerns about environmental sustainability in engineering. A number of methods and tools have been introduced to operationalise the LCE concept, but since then, the scope of sustainability...... has broadened, and as a result, LCE has evolved in parallel with other disciplines with similar aims. Currently, in addition to LCE, there exist a number of concepts such as Industrial Ecology, Cleaner Production, Life Cycle Management (LCM), Industrial Symbiosis, and Circular Economy. As a result......-down and bottom-up approach, the framework establishes a relationship between LCE and the other concepts and positions them relative to the planetary boundaries and the concept of absolute environmental sustainability. (C) 2017 The Authors. Published by Elsevier B.V....

Life cycle assessment of waste paper management

DEFF Research Database (Denmark)

Merrild, Hanna Kristina; Damgaard, Anders; Christensen, Thomas Højlund

2008-01-01

The significance of technical data, as well as the significance of system boundary choices, when modelling the environmental impact from recycling and incineration of waste paper has been studied by a life cycle assessment focusing oil global warming potentials. The consequence of choosing...... results. The modelling showed that recycling of paper, from a life cycle point of view, is environmentally equal or better than incineration with energy recovery only when the recycling technology is at a high environmental performance level. However, the modelling also showed that expanding the system...... a specific set of data for the reprocessing technology, the virgin paper manufacturing technology and the incineration technology, as well as the importance of the recycling rate Was Studied. Furthermore, the system was expanded to include forestry and to include fossil fuel energy substitution from saved...

How Metamorphosis Is Different in Plethodontids: Larval Life History Perspectives on Life-Cycle Evolution

Science.gov (United States)

Beachy, Christopher K.; Ryan, Travis J.; Bonett, Ronald M.

2017-01-01

Plethodontid salamanders exhibit biphasic, larval form paedomorphic, and direct developing life cycles. This diversity of developmental strategies exceeds that of any other family of terrestrial vertebrate. Here we compare patterns of larval development among the three divergent lineages of biphasic plethodontids and other salamanders. We discuss how patterns of life-cycle evolution and larval ecology might have produced a wide array of larval life histories. Compared with many other salamanders, most larval plethodontids have relatively slow growth rates and sometimes exceptionally long larval periods (up to 60 mo). Recent phylogenetic analyses of life-cycle evolution indicate that ancestral plethodontids were likely direct developers. If true, then biphasic and paedomorphic lineages might have been independently derived through different developmental mechanisms. Furthermore, biphasic plethodontids largely colonized stream habitats, which tend to have lower productivity than seasonally ephemeral ponds. Consistent with this, plethodontid larvae grow very slowly, and metamorphic timing does not appear to be strongly affected by growth history. On the basis of this, we speculate that feeding schedules and stress hormones might play a comparatively reduced role in governing the timing of metamorphosis of stream-dwelling salamanders, particularly plethodontids. PMID:29269959

Annual reproductive cycle in two free living populations of three-spined stickleback (Gasterosteus aculeatus L.: patterns of ovarian and testicular development

Directory of Open Access Journals (Sweden)

Ewa Sokołowska

2006-03-01

Full Text Available The annual reproductive cycle in two wild populations of three-spinedstickleback was studied. Sticklebacks from the Dead Vistula River(Martwa Wisła (brackish water and the Oliva Stream (Potok Oliwski(freshwater were exposed to annual environmental changes in their naturalhabitats. Ovaries and livers (females, and testes and kidneys (males werecollected during 1-2 years. The gonadosomatic IG, hepatosomaticIH, nephrosomatic IN indices, kidney epithelium height(KEH and size of oocytes were calculated.The number of mature oocytes andpercentage of ovulating females were determined during the spawning season.Histological changes in the ovaries and testes were described throughouta year. Annual reproductive cycles were similar in both populations ofsticklebacks. This is the first histological and morphological study carriedout throughout a year, simultaneously in two wild populations of three-spinedsticklebacks inhabiting different environments. An improved scale of gonadaldevelopment in conjunction with the determined indices and fecundity givea comprehensive description of the reproductive cycle. These new observations,in combination with previously reported features, provide a universal scalethat can be successfully used to distinguish all phases of gametogenesis insticklebacks in different habitats.

Industrial open source solutions for product life cycle management

Directory of Open Access Journals (Sweden)

Jaime Campos

2014-12-01

Full Text Available The authors go through the open source for product life cycle management (PLM and the efforts done from communities such as the open source initiative. The characteristics of the open source solutions are highlighted as well. Next, the authors go through the requirements for PLM. This is an area where more attention has been given as the manufacturers are competing with the quality and life cycle costs of their products. Especially, the need of companies to try to get a strong position in providing services for their products and thus to make themselves less vulnerable to changes in the market has led to high interest in product life cycle simulation. The potential of applying semantic data management to solve these problems discussed in the light of recent developments. In addition, a basic roadmap is presented as to how the above-described problems could be tackled with open software solutions.

Life cycle assessment of asphalt pavement maintenance.

Science.gov (United States)

2014-01-01

This study aims at developing a life cycle assessment (LCA) model to quantify the impact of pavement preservation on energy consumption and greenhouse gas (GHG) emissions. The construction stage contains material, manufacture, transportation and plac...

The life cycle of social media

NARCIS (Netherlands)

Ph.H.B.F. Franses (Philip Hans)

2014-01-01

markdownabstract__Abstract__ Using weekly data on the interest for 17 social media via Google trends and using quarterly data on actual users for 3 social media, it is reported in this letter that the life cycles of social media mimic those of durable consumer goods. On average, the popularity of

Designing for the ISD Life Cycle.

Science.gov (United States)

Wallace, Guy W.; Hybert, Peter R.; Smith, Kelly R.; Blecke, Brian D.

2002-01-01

Outlines the recent criticisms of traditional ISD (Instructional Systems Design) and discusses the implications that impact the life cycle costs of T&D (Training and Development) projects and their ROI (Return On Investment) potential. Describes a modified approach to ISD which mimics the modular approach of systems engineering design.…

Life cycle assessments of energy from solid waste

Energy Technology Data Exchange (ETDEWEB)

Finnveden, Goeran; Johansson, Jessica; Lind, Per; Moberg, Aasa [Stockholm Univ. (Sweden). Dept. of Systems Ecology/Natural Resoruces Management Inst.]|[Defence Research Establishment, Stockholm (Sweden). Div. of Defence Analysis

2000-09-01

The overall aim of the present study is to evaluate different strategies for treatment of solid waste based on a life-cycle perspective. Important goals are to identify advantages and disadvantages of different methods for treatment of solid waste, and to identify critical factors in the systems, including the background systems, which may significantly influence the results. Included in the study are landfilling, incineration, recycling, digestion and composting. The waste fractions considered are the combustible and recyclable or compostable fractions of municipal solid waste. The methodology used is Life Cycle Assessment. The results can be used for policy decisions as well as strategic decisions on waste management systems.

Development of a methodology for life cycle building energy ratings

International Nuclear Information System (INIS)

Hernandez, Patxi; Kenny, Paul

2011-01-01

Traditionally the majority of building energy use has been linked to its operation (heating, cooling, lighting, etc.), and much attention has been directed to reduce this energy use through technical innovation, regulatory control and assessed through a wide range of rating methods. However buildings generally employ an increasing amount of materials and systems to reduce the energy use in operation, and energy embodied in these can constitute an important part of the building's life cycle energy use. For buildings with 'zero-energy' use in operation the embodied energy is indeed the only life cycle energy use. This is not addressed by current building energy assessment and rating methods. This paper proposes a methodology to extend building energy assessment and rating methods accounting for embodied energy of building components and systems. The methodology is applied to the EU Building Energy Rating method and, as an illustration, as implemented in Irish domestic buildings. A case study dwelling is used to illustrate the importance of embodied energy on life cycle energy performance, particularly relevant when energy use in operation tends to zero. The use of the Net Energy Ratio as an indicator to select appropriate building improvement measures is also presented and discussed. - Highlights: → The definitions for 'zero energy buildings' and current building energy ratings are examined. → There is a need to integrate a life cycle perspective within building energy ratings. → A life cycle building energy rating method (LC-BER), including embodied energy is presented. → Net Energy Ratio is proposed as an indicator to select building energy improvement options.

Studies on regulation of the cell cycle in fission yeast.

Directory of Open Access Journals (Sweden)

Miroslava Požgajová

2015-05-01

Full Text Available All living organisms including plants and animals are composed of millions of cells. These cells perform different functions for the organism although they possess the same chromosomes and carry the same genetic information. Thus, to be able to understand multicellular organism we need to understand the life cycle of individual cells from which the organism comprises. The cell cycle is the life cycle of a single cell in the plant or animal body. It involves series of events in which components of the cell doubles and afterwards equally segregate into daughter cells. Such process ensures growth of the organism, and specialized reductional cell division which leads to production of gamets, assures sexual reproduction. Cell cycle is divided in the G1, S, G2 and M phase. Two gap-phases (G1 and G2 separate S phase (or synthesis and M phase which stays either for mitosis or meiosis. Essential for normal life progression and reproduction is correct chromosome segregation during mitosis and meiosis. Defects in the division program lead to aneuploidy, which in turn leads to birth defects, miscarriages or cancer. Even thou, researchers invented much about the regulation of the cell cycle, there is still long way to understand the complexity of the regulatory machineries that ensure proper segregation of chromosomes. In this paper we would like to describe techniques and materials we use for our studies on chromosome segregation in the model organism Schizosaccharomyces pombe.

A life cycle greenhouse gas inventory of a tree production system

Science.gov (United States)

Alissa Kendall; E. Gregory McPherson

2012-01-01

PurposeThis study provides a detailed, process-based life cycle greenhouse gas (GHG) inventory of an ornamental tree production system for urban forestry. The success of large-scale tree planting initiatives for climate protection depends on projects being net sinks for CO2 over their entire life cycle....

The environmental impact of organic Rankine cycle for waste heat recovery through life-cycle assessment

International Nuclear Information System (INIS)

Liu, Chao; He, Chao; Gao, Hong; Xie, Hui; Li, Yourong; Wu, Shuangying; Xu, Jinliang

2013-01-01

The LCA (life-cycle assessment) was applied to evaluate EI (the environmental impact) of ORCPW (organic Rankine cycle power-plant for waste-heat-recovery) in this paper. The model of LCA on the ORCPW was established. The life-cycle of ORCPW was divided into construction, operation and decommissioning phases. The inventory of environmental emissions was listed for the ORCPW with 7 different working fluids. The GWP (global warming potential), AP (acidification potential), EP (eutrophication potential), HTP (human toxicity potential), SWP (solid waste potential) and SAP (soot and dust potential) were investigated. Some EIs of ORCPW were compared with the EIs of other power generation modes. The results show that the construction phase of ORCPW contributes mostly to the GWP and EP. GWP is the most serious EI followed by HTP among all the environmental impacts. The average pay back times of greenhouse gas discharged from ORCPW is calculated on the basis of five other power generation modes. For 7 different working fluids, it is 3–5 years for CO 2 , about one year for CH 4 and 3–6 years for NO x . But CO cannot be paid back during the life-cycle of ORCPW according to the average pay back time. - Highlights: • LCA was proposed to evaluate the environmental performance of ORC. • The ORC life cycle environmental emissions inventory was established. • GWP is the most serious environmental impact, followed by HTP. • The ORC with R113 exhibits the lowest environment impact load, followed by Pentane. • The total GWP of ORC could be paid back in 5 years

A Framework for BIM-enabled Life-cycle Information Management of Construction Project

OpenAIRE

Xu, n; Ma, Ling; Ding, Lieyun

2014-01-01

BIM has been widely used in project management, but on the whole the applications have been scattered and the BIM models have not been deployed throughout the whole project life-cycle. Each participant builds their own BIM, so there is a major problem in how to integrate these dynamic and fragmented data together. In order to solve this problem, this paper focuses on BIM- based life-cycle information management and builds a framework for BIM-enabled life-cycle information management. To organ...

MONITORED GEOLOGIC REPOSITORY LIFE CYCLE COST ESTIMATE ASSUMPTIONS DOCUMENT

International Nuclear Information System (INIS)

R.E. Sweeney

2001-01-01

The purpose of this assumptions document is to provide general scope, strategy, technical basis, schedule and cost assumptions for the Monitored Geologic Repository (MGR) life cycle cost (LCC) estimate and schedule update incorporating information from the Viability Assessment (VA) , License Application Design Selection (LADS), 1999 Update to the Total System Life Cycle Cost (TSLCC) estimate and from other related and updated information. This document is intended to generally follow the assumptions outlined in the previous MGR cost estimates and as further prescribed by DOE guidance

Life cycle assessment of the Danish electricity distribution network

DEFF Research Database (Denmark)

Turconi, Roberto; Simonsen, Christian G.; Byriel, Inger P.

2014-01-01

Purpose This article provides life cycle inventory data for electricity distribution networks and a life cycle assessment (LCA) of the Danish transmission and distribution networks. The aim of the study was to evaluate the potential importance of environmental impacts associated with distribution...... complexity and material consumption. Infrastructure provided important contributions to metal depletion and freshwater eutrophication (copper and aluminum for manufacturing of the cables and associated recycling being the most important). Underground 50-kV lines had larger impacts than overhead lines, and 0...

Monitored Geologic Repository Life Cycle Cost Estimate Assumptions Document

International Nuclear Information System (INIS)

Sweeney, R.

2000-01-01

The purpose of this assumptions document is to provide general scope, strategy, technical basis, schedule and cost assumptions for the Monitored Geologic Repository (MGR) life cycle cost estimate and schedule update incorporating information from the Viability Assessment (VA), License Application Design Selection (LADS), 1999 Update to the Total System Life Cycle Cost (TSLCC) estimate and from other related and updated information. This document is intended to generally follow the assumptions outlined in the previous MGR cost estimates and as further prescribed by DOE guidance

Addressing software security and mitigations in the life cycle

Science.gov (United States)

Gilliam, David; Powell, John; Haugh, Eric; Bishop, Matt

2004-01-01

Traditionally, security is viewed as an organizational and Information Technology (IT) systems function comprising of firewalls, intrusion detection systems (IDS), system security settings and patches to the operating system (OS) and applications running on it. Until recently, little thought has been given to the importance of security as a formal approach in the software life cycle. The Jet Propulsion Laboratory has approached the problem through the development of an integrated formal Software Security Assessment Instrument (SSAI) with six foci for the software life cycle.

Evaluation of pavement life cycle cost analysis: Review and analysis

Directory of Open Access Journals (Sweden)

Peyman Babashamsi

2016-07-01

Full Text Available The cost of road construction consists of design expenses, material extraction, construction equipment, maintenance and rehabilitation strategies, and operations over the entire service life. An economic analysis process known as Life-Cycle Cost Analysis (LCCA is used to evaluate the cost-efficiency of alternatives based on the Net Present Value (NPV concept. It is essential to evaluate the above-mentioned cost aspects in order to obtain optimum pavement life-cycle costs. However, pavement managers are often unable to consider each important element that may be required for performing future maintenance tasks. Over the last few decades, several approaches have been developed by agencies and institutions for pavement Life-Cycle Cost Analysis (LCCA. While the transportation community has increasingly been utilising LCCA as an essential practice, several organisations have even designed computer programs for their LCCA approaches in order to assist with the analysis. Current LCCA methods are analysed and LCCA software is introduced in this article. Subsequently, a list of economic indicators is provided along with their substantial components. Collecting previous literature will help highlight and study the weakest aspects so as to mitigate the shortcomings of existing LCCA methods and processes. LCCA research will become more robust if improvements are made, facilitating private industries and government agencies to accomplish their economic aims. Keywords: Life-Cycle Cost Analysis (LCCA, Pavement management, LCCA software, Net Present Value (NPV

Development methodology for the software life cycle process of the safety software

Energy Technology Data Exchange (ETDEWEB)

Kim, D. H.; Lee, S. S. [BNF Technology, Taejon (Korea, Republic of); Cha, K. H.; Lee, C. S.; Kwon, K. C.; Han, H. B. [KAERI, Taejon (Korea, Republic of)

2002-05-01

A methodology for developing software life cycle processes (SLCP) is proposed to develop the digital safety-critical Engineered Safety Features - Component Control System (ESF-CCS) successfully. A software life cycle model is selected as the hybrid model mixed with waterfall, prototyping, and spiral models and is composed of two stages , development stages of prototype of ESF-CCS and ESF-CCS. To produce the software life cycle (SLC) for the Development of the Digital Reactor Safety System, the Activities referenced in IEEE Std. 1074-1997 are mapped onto the hybrid model. The SLCP is established after the available OPAs (Organizational Process Asset) are applied to the SLC Activities, and the known constraints are reconciled. The established SLCP describes well the software life cycle activities with which the Regulatory Authority provides.

Development methodology for the software life cycle process of the safety software

International Nuclear Information System (INIS)

Kim, D. H.; Lee, S. S.; Cha, K. H.; Lee, C. S.; Kwon, K. C.; Han, H. B.

2002-01-01

A methodology for developing software life cycle processes (SLCP) is proposed to develop the digital safety-critical Engineered Safety Features - Component Control System (ESF-CCS) successfully. A software life cycle model is selected as the hybrid model mixed with waterfall, prototyping, and spiral models and is composed of two stages , development stages of prototype of ESF-CCS and ESF-CCS. To produce the software life cycle (SLC) for the Development of the Digital Reactor Safety System, the Activities referenced in IEEE Std. 1074-1997 are mapped onto the hybrid model. The SLCP is established after the available OPAs (Organizational Process Asset) are applied to the SLC Activities, and the known constraints are reconciled. The established SLCP describes well the software life cycle activities with which the Regulatory Authority provides

Environmental Product Development Combining the Life Cycle Perspective with Chemical Hazard Information

DEFF Research Database (Denmark)

Askham, Cecilia

in the design or redesign process. This thesis concerns marrying the life cycle perspective with chemical hazard information, in order to advance the practice of environmental product development, and hence takes further steps towards sustainable development. The need to consider the full value chain...... for the life cycle of products meant that systems theory and systems engineering principles were important in this work. Life cycle assessment methodology was important for assessing environmental impacts for case products. The new European regulation for chemicals (REACH) provided the main driver......Concerns regarding the short- and long-term detrimental effects of chemicals on human health and ecosystems have made the minimisation of chemical hazards a vitally important issue. If sustainable development is to be achieved, environmental efficient products (and product life cycles...

Fruiting Body Formation in Volvariella volvacea Can Occur Independently of Its MAT-A-Controlled Bipolar Mating System, Enabling Homothallic and Heterothallic Life Cycles

Directory of Open Access Journals (Sweden)

Bingzhi Chen

2016-07-01

Full Text Available Volvariella volvacea is an important crop in Southeast Asia, but erratic fruiting presents a serious challenge for its production and breeding. Efforts to explain inconsistent fruiting have been complicated by the multinucleate nature, typical lack of clamp connections, and an incompletely identified sexual reproductive system. In this study, we addressed the life cycle of V. volvacea using whole genome sequencing, cloning of MAT loci, karyotyping of spores, and fruiting assays. Microscopy analysis of spores had previously indicated the possible coexistence of heterothallic and homothallic life cycles. Our analysis of the MAT loci showed that only MAT-A, and not MAT-B, controlled heterokaryotization. Thus, the heterothallic life cycle was bipolar. Karyotyping of single spore isolates (SSIs using molecular markers supported the existence of heterokaryotic spores. However, most SSIs were clearly not heterokaryotic, yet contained structural variation (SV markers relating to both alleles of both parents. Heterokaryons from crossed, self-sterile homokaryons could produce fruiting bodies, agreeing with bipolar heterothallism. Meanwhile, some SSIs with two different MAT-A loci also produced fruiting bodies, which supported secondary homothallism. Next, SSIs that clearly contained only one MAT-A locus (homothallism were also able to fruit, demonstrating that self-fertile SSIs were not, per definition, secondary homothallic, and that a third life cycle or genetic mechanism must exist. Finally, recombination between SV markers was normal, yet 10 out of 24 SV markers showed 1:2 or 1:3 distributions in the spores, and large numbers of SSIs contained doubled SV markers. This indicated selfish genes, and possibly partial aneuploidy.

Life Cycle Greenhouse Gas Emissions of Nuclear Electricity Generation: Systematic Review and Harmonization

International Nuclear Information System (INIS)

Warner, E.S.; Heath, G.A.

2012-01-01

A systematic review and harmonization of life cycle assessment (LCA) literature of nuclear electricity generation technologies was performed to determine causes of and, where possible, reduce variability in estimates of life cycle greenhouse gas (GHG) emissions to clarify the state of knowledge and inform decision making. LCA literature indicates that life cycle GHG emissions from nuclear power are a fraction of traditional fossil sources, but the conditions and assumptions under which nuclear power are deployed can have a significant impact on the magnitude of life cycle GHG emissions relative to renewable technologies. Screening 274 references yielded 27 that reported 99 independent estimates of life cycle GHG emissions from light water reactors (LWRs). The published median, interquartile range (IQR), and range for the pool of LWR life cycle GHG emission estimates were 13, 23, and 220 grams of carbon dioxide equivalent per kilowatt-hour (g CO 2 -eq/kWh), respectively. After harmonizing methods to use consistent gross system boundaries and values for several important system parameters, the same statistics were 12, 17, and 110 g CO 2 -eq/kWh, respectively. Harmonization (especially of performance characteristics) clarifies the estimation of central tendency and variability. To explain the remaining variability, several additional, highly influential consequential factors were examined using other methods. These factors included the primary source energy mix, uranium ore grade, and the selected LCA method. For example, a scenario analysis of future global nuclear development examined the effects of a decreasing global uranium market-average ore grade on life cycle GHG emissions. Depending on conditions, median life cycle GHG emissions could be 9 to 110 g CO 2 -eq/kWh by 2050.

Optimal Life-Cycle Investing with Flexible Labor Supply: A Welfare Analysis of Life-Cycle Funds

OpenAIRE

Francisco J. Gomes; Laurence J. Kotlikoff; Luis M. Viceira

2008-01-01

We investigate optimal consumption, asset accumulation and portfolio decisions in a realistically calibrated life-cycle model with flexible labor supply. Our framework allows for wage rate uncertainly, variable labor supply, social security benefits and portfolio choice over safe bonds and risky equities. Our analysis reinforces prior findings that equities are the preferred asset for young households, with the optimal share of equities generally declining prior to retirement. However, variab...

A study on the environmental impacts analysis with life cycle analysis of NPPs

International Nuclear Information System (INIS)