WorldWideScience

Sample records for repetition maximum 1rm

  1. Variação da força muscular em testes repetitivos de 1-RM em crianças pré-púberes Variación de la fuerza en tests repetitivos de 1-RM en pre-púberes Variation of the muscular strength in repetitive 1-RM test in prepubescent children

    Directory of Open Access Journals (Sweden)

    André Luiz Demantova Gurjão

    2005-12-01

    sometidos a ocho sesiones de pruebas de 1-RM en los ejercicios de extensión de piernas en máquina y curl con barra en pie, con el intervalo de 48 horas entre cada sesión. Tres esfuerzos, intervalados durante 3-5 minutos de descanso, fueron ejecutados por los chicos en cada uno de los ejercicios escogidos. Se observaron aumentos significantes de 30,2% y 22,7% entre la primera y la octava sesión de pruebas en los ejercicios de la extensión de piernas en máquina y curl con barra en pie, respectivamente (P 0,05. Esos resultados indican que el número necesario de sesiones para la estabilización de la fuerza muscular en las pruebas de 1-RM parece ser dependiente de la tarea de cada tipo ejecutado y, posiblemente, del tamaño del agrupamiento de los agonistas musculares involucraron en la ejecución de la tarea del motivo. Por consiguiente, lo que resulta nos hace pensar en que para una evaluación más necesaria de la fuerza muscular de los muchachos pré-puberes, a través de las pruebas de 1-RM, son necesarias de tres a cinco sesiones del familiarization.Although one-repetition maximum tests (1-RM are widely employed to evaluate the muscular power, the lack of previous familiarization with the test procedures may cause erroneous interpretations. Thus, the purpose of this study was to analyze the behavior of the muscular strength in prepubescent children during 1-RM repetitive tests. For this, nine boys (9.5 ± 0.5 years; 35.1 ± 6.9 kg; 138.3 ± 6.1 cm with no previous experience in weight exerciseswere submitted to eight sessions of 1-RM tests in the leg extension and arm curl exercises, and with a 48 hours interval between sessions. Three trials with 3-5 minutes of resting interval were performed by subjects in each of the chosen exercises. It was observed significant increases of 30.2% and 22.7% between the first and eighth session in the leg extension and arm curl exercise tests, respectively (P < 0.05. However, no statistically significant difference was found

  2. Anthropometry increases 1 repetition maximum predictive ability of NFL-225 test for Division IA college football players.

    Science.gov (United States)

    Hetzler, Ronald K; Schroeder, Brian L; Wages, Jennifer J; Stickley, Christopher D; Kimura, Iris F

    2010-06-01

    The purpose of this study was to compare existing 1 repetition maximum (1RM) bench press prediction equations in National Collegiate Athletic Association (NCAA) Division IA college football players and determine if the error associated with the prediction of 1RM bench press from the National Football League (NFL)-225 test could be reduced through the addition of anthropometric measurements. Anthropometric measures, 1RM bench press, NFL-225 test repetitions to fatigue, and body composition data were collected on 87 Division IA football players (mean+/-SD age 19.9+/-1.3 years; height 182.3+/-7.3 cm; body mass 102.3+/-21.1 kg; % fat 13.9+/-6.7; 1RM bench press 140.5+/-2 6.6 kg; and NFL-225 reps to fatigue 14.1+/-8.0). Hierarchical regression revealed an R=0.87 when predicting 1RM from the NFL-225 test alone, which improved to R=0.90 with the addition of the anthropometric variables: arm circumference and arm length. The following equation was the best performing model to predict 1RM bench press: 1RM (lb)=299.08+2.47 arm circumference (cm)--4.60 arm length (cm)+5.84 reps @ 225; SEE=18.3 lb). This equation predicted 43.7% of subjects' within +/-10 lb of their actual 1RM bench press. Using a crossvalidation group, the equation resulted in estimates of 1RM which were not significantly different than the actual 1RM. Because of the variability that has been shown to be associated with 1RM prediction equations, the use of actual 1RM testing is recommended when this is a critical variable. However, coaches, scouts, and athletes, who choose to estimate 1RM bench press using repetitions to failure from the NFL-225 test, may benefit from the use of the equations developed in this study to estimate 1RM bench press with the inclusion of simple anthropometric measurements.

  3. One-repetition maximum bench press performance estimated with a new accelerometer method.

    Science.gov (United States)

    Rontu, Jari-Pekka; Hannula, Manne I; Leskinen, Sami; Linnamo, Vesa; Salmi, Jukka A

    2010-08-01

    The one repetition maximum (1RM) is an important method to measure muscular strength. The purpose of this study was to evaluate a new method to predict 1RM bench press performance from a submaximal lift. The developed method was evaluated by using different load levels (50, 60, 70, 80, and 90% of 1RM). The subjects were active floorball players (n = 22). The new method is based on the assumption that the estimation of 1RM can be calculated from the submaximal weight and the maximum acceleration of the submaximal weight during the lift. The submaximal bench press lift was recorded with a 3-axis accelerometer integrated to a wrist equipment and a data acquisition card. The maximum acceleration was calculated from the measurement data of the sensor and analyzed in personal computer with LabView-based software. The estimated 1RM results were compared with traditionally measured 1RM results of the subjects. An own estimation equation was developed for each load level, that is, 5 different estimation equations have been used based on the measured 1RM values of the subjects. The mean (+/-SD) of measured 1RM result was 69.86 (+/-15.72) kg. The mean of estimated 1RM values were 69.85-69.97 kg. The correlations between measured and estimated 1RM results were high (0.89-0.97; p < 0.001). The differences between the methods were very small (-0.11 to 0.01 kg) and were not significantly different from each other. The results of this study showed promising prediction accuracy for estimating bench press performance by performing just a single submaximal bench press lift. The estimation accuracy is competitive with other known estimation methods, at least with the current study population.

  4. One-repetition maximum strength test represents a valid means to assess leg strength in vivo in humans.

    Science.gov (United States)

    Verdijk, Lex B; van Loon, Luc; Meijer, Kenneth; Savelberg, Hans H C M

    2009-01-01

    Skeletal muscle strength is often determined to evaluate the adaptive response to an exercise intervention programme. Although dynamometry is considered the "gold standard" for the assessment of muscle strength in vivo, one-repetition maximum (1-RM) testing performed on training-specific equipment is more commonly applied. We assessed the validity of specific knee extension 1-RM testing by comparison with dynamometry in a heterogeneous population (n=55). All participants performed 1-RM tests on regular leg extension and leg press machines. Additionally, isometric (at seven different knee angles) and isokinetic (at four different velocities) knee extension peak torques were determined. Pearson's r was calculated for the relationship between 1-RM data and peak torques for the entire population and for subgroups defined by age and gender. One-repetition maximum strength correlated strongly with the dynamometer results. One-repetition maximum leg extension correlated more strongly with peak torques than did 1-RM leg press (0.78leg muscle strength in vivo in young and elderly men and women. Considering the importance of training specificity in strength assessment, we argue that 1-RM testing can be applied to assess changes in leg muscle strength following an exercise intervention.

  5. Efficacy of daily one-repetition maximum training in well-trained powerlifters and weightlifters: a case series

    Directory of Open Access Journals (Sweden)

    Michael C. Zourdos

    Full Text Available Introduction: The purpose of this study was to investigate the efficacy of daily one-repetition maximum (1RM training of the back squat on maximal strength. Material and methods: Three competitive lifters performed the squat for 37 consecutive days and are reported as individual cases. Participant 1 (P1 (body mass = 80.5 kg; age = 28 yrs. and participant 3 (P3 (body mass = 108.8 kg; age = 34 yrs. were powerlifters; participant 2 (P2 (body mass = 64.1 kg; age = 19 yrs. was a weightlifter. Each participant had at least 5 years of training experience with the squat. During days 1-35, participants performed a 1RM squat followed by 5 volume sets of 3 repetitions at 85% or 2 repetitions at 90% of the daily 1RM. On day-36, participants performed only 1 set of 1 repetition at 85% of day-1 1RM; and a final 1RM was performed on day-37. Results: Absolute and percent changes for P1 from day-1 to day-37 were +5 kg/2.3%, and from day-1 to peak (greatest 1RM of the period were +12.5 kg/5.8%. P2 experienced a 13.5 kg/10.8% increase in 1RM from both day-1 to day-37 and day-1 to peak. P3 demonstrated a 21.0 kg/9.5% increase from both day-1 to day-37 and day-1 to peak. All 3 participants exhibited significant (p < 0.05 correlations between time (days and 1RM (P1: r = 0.65, P2: r = 0.78, P3: r = 0.48. Conclusions: Our findings suggest that daily 1RM training effectively produced robust changes in maximal strength in competitive strength athletes in a relatively short training period.

  6. Modelo de predição de uma repetição máxima (1RM baseado nas características antropométricas de homens e mulheres Modelo de predicción de una repetición máxima (1RM basado en las características antropométricas de hombres y mujeres Prediction model of a maximal repetition (1RM based on male and female anthropometrical characteristics

    Directory of Open Access Journals (Sweden)

    Wollner Materko

    2007-02-01

    maximal repetition (1RM in women and men, based exclusively on anthropometrical characteristics. Forty-four low-risk and experienced in strength training young subjects, being 22 male (23 ± 4 years, 76.6 ± 12.7 kg, 173.9 ± 5.5 cm, 11 ± 4.5 % of body fat and 22 female (22 ± 4 years, 54 ± 6.0 kg, 161 ± 5.8 cm, 18 ± 2.2 % of body fat volunteered for this study. All subjects were submitted to an anthropometrical evaluation followed by a 1RM familiarization test (shoulder press, which was repeated after 48h. The repeatability was tested using Wilcoxon Matched paired test. Finally, the 1RM workload was modeled in relation to the anthropometrical variables through multiple linear regression (forward stepwise using as cutoff criteria for the independent variables deltar² < 0.01. The models reliability was expressed by the Bland and Altman analysis. All tests assumed alpha = 0.05. No significant differences were recorded between the two tests, resulting 44.6 ± 13.2 kg and 12.2 ± 3.2kg, for male (MS and female (FS subjects respectively. The time of practice in strength training was also included in the models. The model resulted in 84% of explained variance and a standard error of 12% for the MS. On the other hand, for the FS the predictive capacity was weaker than for = the MS, resulting in 56% of the explained variance and a standard error of 20%. In conclusion, the obtained models showed acceptable reliability so that they can be currently used as a tool for predicting the 1RM workload.

  7. Efficacy of the National Football League-225 Test to Track Changes in One Repetition Maximum Bench Press After Training in National Collegiate Athletic Association Division IA Football Players.

    Science.gov (United States)

    Mann, J Bryan; Ivey, Pat A; Stoner, Josh D; Mayhew, Jerry L; Brechue, William F

    2015-11-01

    Numerous investigations have attested to the efficacy of the National Football League (NFL)-225 test to estimate one repetition maximum (1RM) bench press. However, no studies have assessed the efficacy of the test to track changes in strength across a training program. The purpose of this study was to determine the accuracy of the NFL-225 test for determining the change in 1RM bench press in National Collegiate Athletic Association Division IA college football players after training. Over a 4-year period, players (n = 203) were assessed before and after a 6-week off-season resistance program for 1RM bench press and repetitions completed with 102.3 kg (225 lbs). Test sessions typically occurred within 1 week of each other. Players significantly increased 1RM by 4.2 ± 8.6 kg and NFL-225 repetitions by 0.9 ± 2.3, although the effect size (ES) for each was trivial (ES = 0.03 and 0.07, respectively). National Football League 225 prediction equations had higher correlations with 1RM before training (intraclass correlation coefficient [ICC] = 0.95) than after training (ICC = 0.75). The correlation between the change in NFL-225 repetitions and change in 1RM was low and negative (r = -0.22, p football players and render the NFL-225 test less effective in predicting the change in 1RM bench press strength after short-term training.

  8. RELIABILITY OF THE ONE-REPETITION MAXIMUM TEST BASED ON MUSCLE GROUP AND GENDER

    Directory of Open Access Journals (Sweden)

    Dong-il Seo

    2012-06-01

    Full Text Available The purpose of the present study was to examine the influence of muscle group location and gender on the reliability of assessing the one-repetition maximum (1RM test. Thirty healthy males (n = 15 and females (n = 15 who experienced at least 3 months of continuous resistance training during the last 2 years aged 18-35 years volunteered to participate in the study. The 1RM for the biceps curl, lat pull down, bench press, leg curl, hip flexion, triceps extension, shoulder press, low row, leg extension, hip extension, leg press and squat were measured twice by a trained professional using a standard published protocol. Biceps curl, lat pull down, bench press, leg curl, hip flexion, and squat 1RM's were measured on the first visit, then 48 hours later, subjects returned for their second visit. During their second visit, 1RM of triceps extension, shoulder press, low row, leg extension, hip extension, and leg press were measured. One week from the second visit, participants completed the 1 RM testing as previously done during the first and second visits. The third and fourth visits were separated by 48 hours as well. All four visits to the laboratory were at the same time of day. A high intraclass correlation coefficient (ICC > 0.91 was found for all exercises, independent of gender and muscle group size or location, however there was a significant interaction for muscle group location (upper body vs. lower body in females (p < 0.027. In conclusion, a standardized 1RM testing protocol with a short warm-up and familiarization period is a reliable measurement to assess muscle strength changes regardless of muscle group location or gender

  9. Estimations of One Repetition Maximum and Isometric Peak Torque in Knee Extension Based on the Relationship Between Force and Velocity.

    Science.gov (United States)

    Sugiura, Yoshito; Hatanaka, Yasuhiko; Arai, Tomoaki; Sakurai, Hiroaki; Kanada, Yoshikiyo

    2016-04-01

    We aimed to investigate whether a linear regression formula based on the relationship between joint torque and angular velocity measured using a high-speed video camera and image measurement software is effective for estimating 1 repetition maximum (1RM) and isometric peak torque in knee extension. Subjects comprised 20 healthy men (mean ± SD; age, 27.4 ± 4.9 years; height, 170.3 ± 4.4 cm; and body weight, 66.1 ± 10.9 kg). The exercise load ranged from 40% to 150% 1RM. Peak angular velocity (PAV) and peak torque were used to estimate 1RM and isometric peak torque. To elucidate the relationship between force and velocity in knee extension, the relationship between the relative proportion of 1RM (% 1RM) and PAV was examined using simple regression analysis. The concordance rate between the estimated value and actual measurement of 1RM and isometric peak torque was examined using intraclass correlation coefficients (ICCs). Reliability of the regression line of PAV and % 1RM was 0.95. The concordance rate between the actual measurement and estimated value of 1RM resulted in an ICC(2,1) of 0.93 and that of isometric peak torque had an ICC(2,1) of 0.87 and 0.86 for 6 and 3 levels of load, respectively. Our method for estimating 1RM was effective for decreasing the measurement time and reducing patients' burden. Additionally, isometric peak torque can be estimated using 3 levels of load, as we obtained the same results as those reported previously. We plan to expand the range of subjects and examine the generalizability of our results.

  10. Reliability of the one-repetition-maximum power clean test in adolescent athletes.

    Science.gov (United States)

    Faigenbaum, Avery D; McFarland, James E; Herman, Robert E; Naclerio, Fernando; Ratamess, Nicholas A; Kang, Jie; Myer, Gregory D

    2012-02-01

    Although the power clean test is routinely used to assess strength and power performance in adult athletes, the reliability of this measure in younger populations has not been examined. Therefore, the purpose of this study was to determine the reliability of the 1-repetition maximum (1RM) power clean in adolescent athletes. Thirty-six male athletes (age 15.9 ± 1.1 years, body mass 79.1 ± 20.3 kg, height 175.1 ±7.4 cm) who had >1 year of training experience in weightlifting exercises performed a 1RM power clean on 2 nonconsecutive days in the afternoon following standardized procedures. All test procedures were supervised by a senior level weightlifting coach and consisted of a systematic progression in test load until the maximum resistance that could be lifted for 1 repetition using proper exercise technique was determined. Data were analyzed using an intraclass correlation coefficient (ICC[2,k]), Pearson correlation coefficient (r), repeated measures analysis of variance, Bland-Altman plot, and typical error analyses. Analysis of the data revealed that the test measures were highly reliable demonstrating a test-retest ICC of 0.98 (95% confidence interval = 0.96-0.99). Testing also demonstrated a strong relationship between 1RM measures in trials 1 and 2 (r = 0.98, p adolescent athletes when standardized testing procedures are followed and qualified instruction is present.

  11. RELIABILITY OF THE ONE REPETITION-MAXIMUM POWER CLEAN TEST IN ADOLESCENT ATHLETES

    Science.gov (United States)

    Faigenbaum, Avery D.; McFarland, James E.; Herman, Robert; Naclerio, Fernando; Ratamess, Nicholas A.; Kang, Jie; Myer, Gregory D.

    2013-01-01

    Although the power clean test is routinely used to assess strength and power performance in adult athletes, the reliability of this measure in younger populations has not been examined. Therefore, the purpose of this study was to determine the reliability of the one repetition maximum (1 RM) power clean in adolescent athletes. Thirty-six male athletes (age 15.9 ± 1.1 yrs, body mass 79.1 ± 20.3 kg, height 175.1 ±7.4 cm) who had more than 1 year of training experience with weightlifting exercises performed a 1 RM power clean on two nonconsecutive days in the afternoon following standardized procedures. All test procedures were supervised by a senior level weightlifting coach and consisted of a systematic progression in test load until the maximum resistance that could be lifted for one repetition using proper exercise technique was determined. Data were analyzed using an intraclass correlation coefficient (ICC [2,k]), Pearson correlation coefficient (r), repeated measures ANOVA, Bland-Altman plot, and typical error analyses. Analysis of the data revealed that the test measures were highly reliable demonstrating a test-retest ICC of 0.98 (95% CI = 0.96–0.99). Testing also demonstrated a strong relationship between 1 RM measures on trial 1 and trial 2 (r=0.98, padolescent athletes when standardized testing procedures are followed and qualified instruction is present. PMID:22233786

  12. NFL-225 test to predict 1RM bench press in NCAA Division I football players.

    Science.gov (United States)

    Mann, J Bryan; Stoner, Josh D; Mayhew, Jerry L

    2012-10-01

    The National Football League (NFL)-225 test has gained popularity for assessing muscular performance among college football programs. Although the test is a measure of absolute muscular endurance, it was reputed to be highly correlated with maximum muscular strength. The purposes of this study were to assess the predictive potential of the NFL-225 test for estimating 1 repetition maximum (1RM) bench press performance in National Collegiate Athletic Association Division I college football players and to evaluate the accuracy of previous NFL-225 prediction equations. Players (n = 289) in a successful Division I program were assessed over a period of 5 years for 1RM bench press and repetitions completed with 102.3 kg (225 lb). Test sessions occurred within 1 week of each other during the off-season training period. In a validation group (n = 202), repetitions were significantly correlated with 1RM (r = 0.95), producing a prediction equation (1RM [kg] = 103.5 + 3.08 Reps) with a standard error of estimate = 6.4 kg (coefficient of variation = 4.3%). In a randomly selected cross-validation group (n = 87), the new equation nonsignificantly underpredicted by 0.9 ± 7.2 kg produced a high correlation with actual 1RM (intraclass correlation coefficient [ICC] = 0.967), had a limit of agreement of -15.0 to 13.2 kg, and predicted 69% of the group within ±4.5 kg of their actual 1RM. The best previous equation was that of Slovak et al., which was nonsignificantly underpredicted by -0.5 ± 6.7 kg, produced a high correlation with actual 1RM (ICC = 0.975), and predicted 68% of the group within ±4.5 kg of their actual 1RM. The new NFL-225 test seems to be a reasonable predictor of 1RM bench press in Division I players but should be further assessed on players from other high-level programs.

  13. Precision of 1-RM prediction equations in non-competitive subjects performing strength training

    Directory of Open Access Journals (Sweden)

    M.L. Lacio

    2010-01-01

    Full Text Available The purpose of this study was to assess the precision of the 1-RM prediction equations proposed by Adams (1994, Baechle and Groves (2000, Brzycki (1993, Epley (1985, Lander (1985 and O’Conner et al. (1989 for strength assessment in fitness programs. Thirty one healthy regular strength training male practitioners (mean ± SD: 21.8 ± 4.0 years of age; 75.9 ± 8.4 kg of weight; and 178.1 ± 6.4 cm of height performed two tests on the bench press exercise: (a maximum test - determination of the 1-RM load; and (b submaximum test - determination of the load matching 4 to 10 maximum repetitions. Analysis of variance (ANOVA found no significant difference (p > .05 between maximum load determination through prediction equations or through the 1-RM test. The coefficient of determination (r2 varied from .94 to .96. The prediction equations had small standard error of estimate (2.7 to 3.2 kg. Results indicate that the 1-RM prediction equations could be used to determine the maximum load at the bench press exercise in subjects with low strength training experience.

  14. Relationship between 1RM back squat test results and explosive movements in professional basketball players

    Directory of Open Access Journals (Sweden)

    Saša Jakovljević

    2015-11-01

    Full Text Available The objectives of this study were related to the research of the relations between the abilities of professional basketball players in the performance of one repetition maximum (1RM back squat and explosive movements, such as 5, 10 and 20-metre running, and vertical jump; as well as the detection and comparison of these abilities between players who play on the outside and inside positions. The study involved 35 professional basketball players (22 outside and 13 inside who were selected as candidates for the national team of Bulgaria. Independent variables of muscular strength were obtained by applying the 1RM back squat test (142.06 ± 29.31 kg, and were normalized with respect to the body mass (1RM Squat/kg (1.51 ± 0.25 and by applying suitable allometric exponent (1RM SquatAl (6.86 ± 1.16. Dependent variables were obtained using two tests: 20-metre run (times registered at 5 and 10 metres and vertical jump (used to calculate the variable peak anaerobic power (PAPW. The results indicated that none of the variables of strength were significantly related to the speed performance, while moderate correlations occurred between the normalized strength variables (1RM Squat/kg and 1RM SquatAl and vertical jump (r = 0.310 and r = 0.308 / p < 0.05. The results obtained show greater correlation (r = 0.660 / p < 0.01 in the ability to deliver power when performing squat and mechanical work performed in vertical jumps. Outside and inside players were significantly different in three variables only: peak anaerobic power, body height and body weight.

  15. Inter-Investigator Reliability of Anthropometric Prediction of 1RM Bench Press in College Football Players

    Science.gov (United States)

    SCHUMACHER, RICHARD M.; ARABAS, JANA L.; MAYHEW, JERRY L.; BRECHUE, WILLIAM F.

    2016-01-01

    The purpose of this study was to determine the effect of inter-investigator differences in anthropometric assessments on the prediction of one-repetition maximum (1RM) bench press in college football players. Division-II players (n = 34, age = 20.4 ± 1.2 y, 182.3 ± 6.6 cm, 99.1 ± 18.4 kg) were measured for selected anthropometric variables and 1RM bench press at the conclusion of a heavy resistance training program. Triceps, subscapular, and abdominal skinfolds were measured in triplicate by three investigators and used to estimate %fat. Arm circumference was measured around a flexed biceps muscle and was corrected for triceps skinfold to estimate muscle cross-sectional area (CSA). Chest circumference was measured at mid-expiration. Significant differences among the testers were evident in six of the nine anthropometric variables, with the least experienced tester being significantly different from the other testers on seven variables, although average differences among investigators ranged from 1–2% for circumferences to 4–9% for skinfolds. The two more experienced testers were significantly different on only one variable. Overall agreement among testers was high (ICC>0.895) for each variable, with low coefficients of variation (CV<10.7%). Predicted 1RMs for testers (126.9 ± 20.6, 123.4 ± 22.0, and 132.1 ± 28.4 kg, respectively) were not significantly different from actual 1RM (129.2 ± 20.6 kg). Individuals with varying levels of experience appear to have an acceptable level of ability to estimate 1RM bench press using a non-performance anthropometric equation. Minimal experience in anthropometry may not impede strength and conditioning specialists from accurately estimating 1RM bench press. PMID:27766130

  16. The one repetition maximum test and the sit-to-stand test in the assessment of a specific pulmonary rehabilitation program on peripheral muscle strength in COPD patients

    Directory of Open Access Journals (Sweden)

    Zanini A

    2015-11-01

    Full Text Available Andrea Zanini,1,2 Marina Aiello,3 Francesca Cherubino,1 Elisabetta Zampogna,1 Andrea Azzola,4 Alfredo Chetta,3 Antonio Spanevello1,5 1Division of Pneumology, IRCCS Rehabilitation Institute of Tradate, Salvatore Maugeri Foundation, Tradate, Italy; 2Division of Internal and Respiratory Medicine, Malcantonese Hospital, Giuseppe Rossi Foundation, Castelrotto, Switzerland; 3Respiratory Disease and Lung Function Unit, Department of Clinical and Experimental Medicine, University of Parma, Padiglione Rasori, Parma, Italy; 4Division of Pneumology, Department of Internal Medicine, Ospedale Civico, Lugano, Switzerland; 5Department of Clinical and Experimental Medicine, University of Insubria, Varese, Italy Background: Individuals with COPD may present reduced peripheral muscle strength, leading to impaired mobility. Comprehensive pulmonary rehabilitation (PR should include strength training, in particular to lower limbs. Furthermore, simple tools for the assessment of peripheral muscle performance are required.Objectives: To assess the peripheral muscle performance of COPD patients by the sit-to-stand test (STST, as compared to the one-repetition maximum (1-RM, considered as the gold standard for assessing muscle strength in non-laboratory situations, and to evaluate the responsiveness of STST to a PR program.Methods: Sixty moderate-to-severe COPD inpatients were randomly included into either the specific strength training group or into the usual PR program group. Patients were assessed on a 30-second STST and 1-minute STST, 1-RM, and 6-minute walking test (6MWT, before and after PR. Bland–Altman plots were used to evaluate the agreement between 1-RM and STST. Results: The two groups were not different at baseline. In all patients, 1-RM was significantly related to the 30-second STST (r=0.48, P<0.001 and to 1-minute STST (r=0.36, P=0.005. The 30-second STST was better tolerated in terms of the perceived fatigue (P=0.002 and less time consuming (P<0

  17. Influência do processo de familiarização para avaliação da força muscular em testes de 1-RM Influencia del proceso de familiarizacion para evaluación de la fuerza muscular en tests de 1-RM Influence of familiarization process on muscular strength assessment in 1-RM tests

    Directory of Open Access Journals (Sweden)

    Raphael Mendes Ritti Dias

    2005-02-01

    saludables con experiencia previa de por lo menos seis meses de entrenamiento con pesos, fueron sometidos a tests reptitivos de 1-RM en los ejercicios supino en banco horizontal, agachamiento y rosca directa de bíceps. Los tests fueran ejecutados en cuatro sesiones, intervaladas en cada 48-72 horas. Un número máximo de tres tentativas, con intérvalo de tres a cinco minutos para recuperación, fué utilizado en cada ejercicio, en las cuatro sessiones de testeo. ANOVA se utilizó para medidas repetidas, seguida por el test post hoc de Tukey, cuando p 0,05, bien con entre la tercera y la cuarta sesión en el supino en el banco horizontal y en el agachamiento (p > 0,05. Los resultados indican que la falta de familiarización previa con tests de 1-RM puede comprometer la evaluación de la fuerza muscular. Por lo tanto, se sugiere para la evaluación mas acurada de la fuerza muscular mediante tests de 1-RM la ejecución de dos a tres sesiones de familiarización en los hombres adultos con experiencia en ejercicios con pesos.Although the use of maximum repetition tests (1-RM is frequent for assessment of the muscular strength, one believes that the results obtained may be affected by the lack of previous familiarization, even in skilled subjects in exercises with weights. Thus, the objective of this study was to investigate the impact of the familiarization process on the muscular strength assessment in 1-RM tests. To do so, 21 men (24.5 ± 3.8 years of age, apparently healthy and with previous experience of at least six months on weight training, were submitted to repetitive tests of 1-RM in bench press, squat, and arm curl exercises. The tests were performed in four sessions with intervals every 48-72 hours. A maximum number of three attempts with 3-5 minutes interval for recovery was used in each exercise in the four testing sessions. The analysis of variance ANOVA for repeated measures followed by the post hoc Tukey test when p 0.05 as well as between the third and fourth

  18. The development of a repetition-load scheme for the eccentric-only bench press exercise.

    Science.gov (United States)

    Moir, Gavin L; Erny, Kyle F; Davis, Shala E; Guers, John J; Witmer, Chad A

    2013-01-01

    The purpose of the present study was to develop a repetition-load scheme for the eccentric-only bench press exercise. Nine resistance trained men (age: 21.6 ± 1.0 years; 1-repetition maximum [RM] bench press: 137.7 ± 30.4 kg) attended four testing sessions during a four week period. During the first session each subject's 1-RM bench press load utilizing the stretch-shortening cycle was determined. During the remaining sessions they performed eccentric-only repetitions to failure using supra-maximal loads equivalent to 110%, 120% and 130% of their 1-RM value with a constant cadence (30 reps·min(-1)). Force plates and a three dimensional motion analysis system were used during these final three sessions in order to evaluate kinematic and kinetic variables. More repetitions were completed during the 110% 1-RM condition compared to the 130% 1-RM condition (p=0.01). Mean total work (p=0.046) as well as vertical force (p=0.049), vertical work (p=0.017), and vertical power output (p=0.05) were significantly greater during the 130% 1-RM condition compared to the 110% 1-RM condition. A linear function was fitted to the number of repetitions completed under each load condition that allowed the determination of the maximum number of repetitions that could be completed under other supra-maximal loads. This linear function predicted an eccentric-only 1-RM in the bench press with a load equivalent to 164.8% 1-RM, producing a load of 227.0 ± 50.0 kg. The repetition-load scheme presented here should provide a starting point for researchers to investigate the kinematic, kinetic and metabolic responses to eccentric-only bench press workouts.

  19. Maximum physical capacity testing in cancer patients undergoing chemotherapy

    DEFF Research Database (Denmark)

    Knutsen, L.; Quist, M; Midtgaard, J

    2006-01-01

    BACKGROUND: Over the past few years there has been a growing interest in the field of physical exercise in rehabilitation of cancer patients, leading to requirements for objective maximum physical capacity measurement (maximum oxygen uptake (VO(2max)) and one-repetition maximum (1RM)) to determine...

  20. Validação da equação de Brzycki para a estimativa de 1-RM no exercício supino em banco horizontal Validez de la ecuación de Brzycki para la estimativa de 1-RM en ejercicio press de banco Validation of the Brzycki equation for the estimation of 1-RM in the bench press

    Directory of Open Access Journals (Sweden)

    Matheus Amarante do Nascimento

    2007-02-01

    intervalo entre cada sesión, para determinar la carga máxima. Posteriormente, un protocolo de resistencia de fuerza fue ejecutado para determinar de 7-10-RM. Los criterios utilizados para la validación incluyeron: test "t" de Student para muestras dependientes, para comparar los valores medios obtenidos por la ecuación predictiva y por el test de 1-RM; coeficiente de correlación de Pearson, para analizar el grado de asociación entre las medidas; error padrón de estimativa (EPE, para la evaluación del grado del desvío de los datos individuales a lo largo de la recta producida; error total (ET, para verificar el desvío medio de los valores individuales de la recta de identidad; error constante (EC, para el análisis de la diferencia entre los valores medios obtenidos en el test de 1-RM y proveídos por la ecuación propuesta. Ninguna diferencia estadística significante fue verificada entre los valores producidos por el test de 1-RM y la ecuación de Brzycki (P > 0,05. Tanto el EPE como el ET fueron relativamente bajos (2,42 kg o 3,4% y 1,55 kg o 2,2%, respectivamente, así como el EC (0,22 kg o 0,3%. Además de esto, el valor del coeficiente de correlación encontrado fue extremamente elevado (r = 0,99; P The aim of the present study was to analyze the validation of the equation proposed by Brzycki for the prediction of a maximum repetition (1-RM in the bench press. Fifty sedentary or moderately active male subjects (22.2 ± 3.5 years; 64.7 ± 8.6 kg, were initially submitted to six test sessions of 1-RM in the bench press, with 48 hours of interval between each session, in order to determine the maximum workload. A protocol of force resistance was then performed for the determination of 7-10-RM. The used criteria for the validation included: t-Student test for dependent samples, for comparison among the mean values obtained by the predictive equation and by the 1-RM test; Pearson correlation coefficient for analysis of the association degree among the measurements

  1. MAXIMUM REPETITION PERFORMANCE AFTER DIFFERENT ANTAGONIST FOAM ROLLING VOLUMES IN THE INTER‐SET REST PERIOD

    Science.gov (United States)

    Škarabot, Jakob; Vigotsky, Andrew D.; Brown, Amanda Fernandes; Gomes, Thiago Matassoli; Novaes, Jefferson da Silva

    2017-01-01

    Background Foam rollers, or other similar devices, are a method for acutely increasing range of motion, but in contrast to static stretching, do not appear to have detrimental effects on neuromuscular performance. Purpose The purpose of this study was to investigate the effects of different volumes (60 and 120 seconds) of foam rolling of the hamstrings during the inter‐set rest period on repetition performance of the knee extension exercise. Methods Twenty‐five recreationally active females were recruited for the study (27.8 ± 3.6 years, 168.4 ± 7.2 cm, 69.1 ± 10.2 kg, 27.2 ± 2.1 m2/kg). Initially, subjects underwent a ten‐repetition maximum testing and retesting, respectively. Thereafter, the experiment involved three sets of knee extensions with a pre‐determined 10 RM load to concentric failure with the goal of completing the maximum number of repetitions. During the inter‐set rest period, either passive rest or foam rolling of different durations (60 and 120 seconds) in a randomized order was employed. Results Ninety‐five percent confidence intervals revealed dose‐dependent, detrimental effects, with more time spent foam rolling resulting in fewer repetitions (Cohen's d of 2.0 and 1.2 for 120 and 60 seconds, respectively, in comparison with passive rest). Conclusion The results of the present study suggest that more inter‐set foam rolling applied to the antagonist muscle group is detrimental to the ability to continually produce force. The finding that inter‐set foam rolling of the antagonist muscle group decreases maximum repetition performance has implications for foam rolling prescription and implementation, in both rehabilitation and athletic populations. Level of evidence 2b PMID:28217418

  2. MAXIMUM REPETITION PERFORMANCE AFTER DIFFERENT ANTAGONIST FOAM ROLLING VOLUMES IN THE INTER-SET REST PERIOD.

    Science.gov (United States)

    Monteiro, Estêvão Rios; Škarabot, Jakob; Vigotsky, Andrew D; Brown, Amanda Fernandes; Gomes, Thiago Matassoli; Novaes, Jefferson da Silva

    2017-02-01

    Foam rollers, or other similar devices, are a method for acutely increasing range of motion, but in contrast to static stretching, do not appear to have detrimental effects on neuromuscular performance. The purpose of this study was to investigate the effects of different volumes (60 and 120 seconds) of foam rolling of the hamstrings during the inter-set rest period on repetition performance of the knee extension exercise. Twenty-five recreationally active females were recruited for the study (27.8 ± 3.6 years, 168.4 ± 7.2 cm, 69.1 ± 10.2 kg, 27.2 ± 2.1 m(2)/kg). Initially, subjects underwent a ten-repetition maximum testing and retesting, respectively. Thereafter, the experiment involved three sets of knee extensions with a pre-determined 10 RM load to concentric failure with the goal of completing the maximum number of repetitions. During the inter-set rest period, either passive rest or foam rolling of different durations (60 and 120 seconds) in a randomized order was employed. Ninety-five percent confidence intervals revealed dose-dependent, detrimental effects, with more time spent foam rolling resulting in fewer repetitions (Cohen's d of 2.0 and 1.2 for 120 and 60 seconds, respectively, in comparison with passive rest). The results of the present study suggest that more inter-set foam rolling applied to the antagonist muscle group is detrimental to the ability to continually produce force. The finding that inter-set foam rolling of the antagonist muscle group decreases maximum repetition performance has implications for foam rolling prescription and implementation, in both rehabilitation and athletic populations. 2b.

  3. Effects of preload 4 repetition maximum on 100-m sprint times in collegiate women.

    Science.gov (United States)

    Linder, Elizabeth E; Prins, Jan H; Murata, Nathan M; Derenne, Coop; Morgan, Charles F; Solomon, John R

    2010-05-01

    The purpose of this study was to determine the effects of postactivation potentiation (PAP) on track-sprint performance after a preload set of 4 repetition maximum (4RM) parallel back half-squat exercises in collegiate women. All subjects (n = 12) participated in 2 testing sessions over a 3-week period. During the first testing session, subjects performed the Controlled protocol consisting of a 4-minute standardized warm-up, followed by a 4-minute active rest, a 100-m track sprint, a second 4-minute active rest, finalized with a second 100-m sprint. The second testing session, the Treatment protocol, consisted of a 4-minute standardized warm-up, followed by 4-minute active rest, sprint, a second 4-minute active rest, a warm-up of 4RM parallel back half-squat, a third 9-minute active rest, finalized with a second sprint. The results indicated that there was a significant improvement of 0.19 seconds (p sprint was preceded by a 4RM back-squat protocol during Treatment. The standardized effect size, d, was 0.82, indicating a large effect size. Additionally, the results indicated that it would be expected that mean sprint times would increase 0.04-0.34 seconds (p 0.05). The findings suggest that performing a 4RM parallel back half-squat warm-up before a track sprint will have a positive PAP affect on decreased track-sprint times. Track coaches, looking for the "competitive edge" (PAP effect) may re-warm up their sprinters during meets.

  4. Heavy Resistance Training in Hypoxia enhances 1RM Squat Performance

    Directory of Open Access Journals (Sweden)

    Mathew William Hunter Inness

    2016-11-01

    Full Text Available Purpose:To determine if heavy resistance training in hypoxia (IHRT is more effective at improving strength, power and increasing lean mass than the same training in normoxia.Methods:A pair-matched, placebo-controlled study design included 20 resistance-trained participants assigned to IHRT (FIO2 0.143 or placebo (FIO2 0.20, (n=10 per group. Participants were matched for strength and training. Both groups performed 20 sessions over 7 weeks either with IHRT or placebo. All participants were tested for 1RM, 20-m sprint, body composition and countermovement jump pre-, mid- and post-training and compared via magnitude-based inferences.Presentation of Results:Groups were not clearly different for any test at baseline. Training improved both absolute (IHRT: 13.1 ± 3.9%, effect size (ES 0.60, placebo 9.8 ± 4.7%, ES 0.31 and relative 1RM (IHRT: 13.4 ± 5.1%, ES 0.76, placebo 9.7 ± 5.3%, ES 0.48 at mid. Similarly, at post both groups increased absolute (IHRT: 20.7 ± 7.6%, ES 0.74, placebo 14.1 ± 6.0%, ES 0.58 and relative 1RM (IHRT: 21.6 ± 8.5%, ES 1.08, placebo 13.2 ± 6.4%, ES 0.78. Importantly, the change in IHRT was greater than placebo at mid for both absolute (4.4% greater change, 90% Confidence Interval (CI 1.0:8.0%, ES 0.21, and relative strength (5.6% greater change, 90% CI 1.0:9.4%, ES 0.31 (relative. There was also a greater change for IHRT at post for both absolute (7.0% greater change, 90% CI 1.3:13%, ES 0.33, and relative 1RM (9.2% greater change, 90% CI 1.6:14.9%, ES 0.49. Only IHRT increased countermovement jump peak power at Post (4.9%, ES 0.35, however the difference between IHRT and placebo was unclear (2.7%, 90% CI -2.0:7.6%, ES 0.20 with no clear differences in speed or body composition throughout.Conclusion:Heavy resistance training in hypoxia is more effective than placebo for improving absolute and relative strength.

  5. Correlation between the 8-repetition maximum test and isokinetic dynamometry in the measurement of muscle strength of the knee extensors: A concurrent validity study.

    Science.gov (United States)

    Taylor, J David; Fletcher, James P

    2013-05-01

    The 8-repetition maximum test has the potential to be a feasible, cost-effective method of measuring muscle strength for clinicians. The purpose of this study was to investigate the concurrent validity of the 8-repetition maximum test in the measurement of muscle strength by comparing the 8-repetition maximum test to the gold standard of isokinetic dynamometry. Thirty participants (15 males and 15 females, mean age = 23.2 years [standard deviation = 1.0]) underwent 8-repetition maximum testing and isokinetic dynamometry testing of the knee extensors (at 60, 120, and 240 degrees per second) on two separate sessions with 2-3 days between each mode of testing. Linear regression was used to assess the validity by comparing the findings between 8-repetition maximum testing and isokinetic dynamometry testing. Significant correlations were found between the 8-repetition maximum and isokinetic dynamometry peak torque at each testing velocity (r  =  0.71-0.85). The highest correlations were between the 8-repetition maximum and isokinetic dynamometry peak torques at 60 (r  =  0.85) and 120 (r  =  0.85) degrees per second. The findings of this study provide supportive evidence for the use of 8-repetition maximum testing as a valid, alternative method for measuring muscle strength.

  6. Efeito da amplitude de movimento no número máximo de repetições no exercício supino livre Efectos de la amplitud de movimiento em el número máximo de repeticiones em el ejercicio de supino libre Effect of range of motion in the maximum number of repetitions in the bench press exercise

    Directory of Open Access Journals (Sweden)

    Fernando Vitor Lima

    2012-12-01

    about increases in strength using different ranges of motion (ROM. The aim of this study was to compare the maximum number of repetitions (MNR in bench press with two different ROM. Fourteen subjects performed familiarization and one repetition maximum (1 RM tests in sessions 1 and 2. MNR in four sets at 50% of 1 RM, one-minute rest with partial (ROMP and complete ROM (ROMC were performed in the third and fourth sessions. The ROMP used half of the bar vertical displacement compared to ROMC. Two-way ANOVA with repeated measures was used to compare the experimental conditions, followed by post hoc Scheffe. There was a significant decrease of the MNR among sets, except from third to fourth sets in both ROM. MNR in all sets was higher in ROMP than ROMC. The reduction of ROM allow to perform higher number of repetitions.

  7. Influência de diferentes ângulos articulares obtidos na posição inicial do exercício pressão de pernas e final do exercício puxada frontal sobre os valores de 1RM Influencia en los diferentes ángulos articulares obtenidos en la posición inicial del ejercicio de presión de piernas y al final del ejercicio de puje frontal sobre los valores de 1RM The influence of different joint angles obtained in the starting position of leg press exercise and at the end of the frontal pull exercise on the values of 1RM

    Directory of Open Access Journals (Sweden)

    João Augusto Reis de Moura

    2004-08-01

    . De tal manera que fueron medidos en el test de 1RM los ejercicios de presión de piernas y puje frontal de 20 sujetos voluntarios del sexo masculino (con medias de edad 24,5 años, estatura 1,75 metros y masa corporal de 72,0 kg. Despues de consentimiento de participación y de adaptación al entrenamiento resistido con pesos fué aplicado al test de 1RM en el ejercício de presión de piernas en tres diferentes ángulos de testado en la posición inicial (80º, 90º y 100º de flexión de rodilla y tambien en el ejercicio de puje frontal en posición final (60º, 70º y 80º de flexión de codo, siendo que cada ángulo fué testado en días diferentes pueden, con los dos ejercicios. Los resultados indican que las medias de 1RM para el ejercicio de presión de piernas son estadísticamente diferentes (F = 30,199; p = 0,000 entre si (post hoc de Tukey. Si para el ejercicio de puje frontal, existen hoy diferencias estas no fueron estadísticamente significativas (F = 1,330; p = 0,281. Se concluye que diferentes técnicas de ejecución de los ejercicios que involucran ángulos diferentes principalmente en las posiciones iniciales de estos deben ser rigurosamente controladas pués pueden afectar el quilaje levantado.The Maximum Repetition test (1RM has been applied under various circumstances and with diverse objectives, and variables that might potentially influence this test have been constantly studied. This study sought to evaluate the influence of different angles in the initial position of the leg press exercises and in the final position of the frontal pull exercise on the results of the 1RM. Twenty male volunteers (with an average age of 24.5 years, height of 1.75 meters and weight of 72 kg were measured in the 1RM test for the leg press exercise and the frontal pull exercise. After obtaining their consent to participate in and adapting to the weight-resistance training, the 1RM test was applied in the leg press exercise in three different test angles in the

  8. Comparison between two strength-training systems on the maximum muscular strength performance

    Directory of Open Access Journals (Sweden)

    W. Materko

    2010-01-01

    Full Text Available The goal of the present study was to compare traditional (ST and pyramid (SP strength training systems during eight weeks on the maximum muscular strength performance. Eighteen experienced in strength training men were divided into two groups of nine volunteers. Four times a week, the ST group trained in three sets of eight repetitions (75% of 1RM and the SP group in three sets of 10, eight and six repetitions (70%, 75% and 80% of 1RM, respectively. All subjects were submitted to an anthropometric evaluation, followed by 1RM test in the bench press and squat exercises, which were repeated after eight weeks of training. The difference between the attained 1RM for each system was studied using Mann-Whitney test and the Wilcoxon paired test was applied to compare pre- and post-training. No significant differences were recorded between ST and SP bench press (125 ± 19 kg and 120 ± 17.0 kg and squat (124 ± 18 kg and 120 ± 17 kg. Furthermore, no significant differences were found between the pre- and post-training periods. According to the present results, both training systems produced similar effects on the maximum muscular strength performance.

  9. Comparison between two strength training systems on the maximum muscular strength performance

    Directory of Open Access Journals (Sweden)

    Wollner Materko

    2010-06-01

    Full Text Available The goal of the present study was to compare traditional (ST and pyramid (SP strength training systems during eight weeks on the maximum muscular strength performance. Eighteen experienced in strength training men were divided into two groups of nine volunteers. Four times a week, the ST group trained in three sets of eight repetitions (75% of 1RM and the SP group in three sets of 10, eight and six repetitions (70%, 75% and 80% of 1RM, respectively. All subjects were submitted to an anthropometric evaluation, followed by 1RM test in the bench press and squat exercises, which were repeated after eight weeks of training. The difference between the attained 1RM for each system was studied using Mann-Whitney test and the Wilcoxon paired test was applied to compare pre- and post-training. No significant differences were recorded between ST and SP bench press (125 ± 19 kg and 120 ± 17.0 kg and squat (124 ± 18 kg and 120 ± 17 kg. Furthermore, no significant differences were found between the pre- and post-training periods. According to the present results, both training systems produced similar effects on the maximum muscular strength performance.

  10. Reprodutibilidade do teste de 1-RM em indivíduos com doença arterial obstrutiva periférica Reproducibility of the 1-RM test in individuals with peripheral obstructive arterial disease

    Directory of Open Access Journals (Sweden)

    Raphael Mendes Ritti Dias

    2010-06-01

    . Patients performed the 1-RM tests in the knee extension exercise in the leg with lower ankle brachial index (ABI and in the leg with higher ABI. This protocol was repeated in four sessions to assess the reliability of the maximum strength measurements. RESULTS: Maximal strength increased significantly from session 1 to session 2 in both legs (4.1 ± 14.3% in the leg with lower ABI and 5.9 ± 13.1% in the leg with higher ABI. The analysis of agreement revealed that higher bias and higher limits of agreement were observed in both legs when sessions 1 and 2 were compared. CONCLUSION: Reliable assessment of strength using 1-RM test in knee extension exercise in patients with PAD and symptoms of intermittent claudication is obtained when 2 test sessions are performed.

  11. Variations in Repetition Duration and Repetition Numbers Influence Muscular Activation and Blood Lactate Response in Protocols Equalized by Time Under Tension.

    Science.gov (United States)

    Lacerda, Lucas T; Martins-Costa, Hugo C; Diniz, Rodrigo C R; Lima, Fernando V; Andrade, André G P; Tourino, Frank D; Bemben, Michael G; Chagas, Mauro H

    2016-01-01

    The aim of this study was to investigate the impact of protocols equalized by the time under tension (TUT) but composed of different repetition durations and repetitions numbers on muscle activation and blood lactate concentration. Twenty-two males with previous experience in resistance training performed 2 training protocols (A and B) with the Smith machine bench press exercise, both with 3 sets, 3 minutes' rest, and 60% of 1 repetition maximum (1RM). Protocol A consisted of 6 repetitions with a 6-second repetition duration for each repetition, whereas in Protocol B the subjects performed 12 repetitions with a 3-second repetition duration for each repetition. Muscular activation was measured in the anterior deltoid, pectoralis major, and triceps brachii muscles while performing the 2 protocols, and the normalized root mean square of the electromyographic signal (EMGRMS) was calculated for each set. Blood lactate concentrations were measured during and until 12 minutes after the completion of each protocol. The results showed that the EMGRMS of all muscles increased during the sets and was higher in Protocol B when compared with Protocol A. Likewise, blood lactate concentrations also increased throughout the sets and were higher in Protocol B both during and after the completion of each training session. The data obtained in this study show that training protocols conducted with the same TUT, but with different configurations, produce distinct neuromuscular and metabolic responses so that performing higher repetition numbers with shorter repetition durations might be a more appropriate strategy to increase muscle activation and blood lactate concentration.

  12. Testes de força e resistência muscular: confiabilidade e predição de uma repetição máxima - Revisão e novas evidências Tests de fuerza y resistencia muscular: confiabilidad de la prediccion de una repeticion máxima - Revision y nuevas evidencias Muscular strength and endurance tests: reliability and prediction of one repetition maximum - Review and new evidences

    Directory of Open Access Journals (Sweden)

    Marta Inez Rodrigues Pereira

    2003-10-01

    % de 1RM debe ser considerada con mucha cautela.Intra-tester reliability is fundamental in determining the quality of data collected in research. Few controlled studies have reported the reliability of strength tests and, in spite of most published studies reporting it to be good (0.79 to 0.99, differences between test and retest are observed to be statistically significant. Thus, for research purposes, it is suggested that values should be taken from a second test, at least, so that changes in strength may be attributed to treatment effect and not simply to adaptation to the test protocol. The relationships between maximum strength tests and submaximal tests or anthropometric variables have been investigated in order to predict maximal strength without submitting subjects to a maximal load test, so as to avoid the risk of injury. Maximal load, or a percentage of it, is commonly used to better prescribe training. Prediction of one repetition maximum (1RM from submaximal tests seems to be good (in general, correlation coefficients > 0.90, although studies have mostly failed to cross-validate prediction equations. Thus, care should be taken especially in relation to specificity of the population, of the exercise, and performance technique when developing and applying these equations. Anthropometric variables have not proven to be good predictors of 1RM. The number of repetitions for a given % of 1RM is different for different exercises, so is the load for a given number of repetitions maximum (nRM when performed at different velocities. Exercise prescription based, indifferently, on number of repetitions or %1RM should be carefully considered.

  13. Validity of different prediction equations of the maximum load in mixed martial arts athletes

    Directory of Open Access Journals (Sweden)

    Jairo Laécio Guerra Filho

    2014-12-01

    Full Text Available The purpose of this study was to investigate the validity of different prediction equations to the one maximum repetition (1-RM test at the bench press exercise (BP with bar in mixed martial arts (MMA athletes. The sample was composed by 19 male MMA athletes (27.68 ± 6.19 years. The data collection was performed in two different moments: 1 in 1-RM test; 2 in submaximal test and their respective numbers of repetitions. The paired-sample t test was performed and was noted that, among the six equations compared with the 1-RM test, only the Adams (p= 0.337 and O’Conner’s (p= 0.250 equations showed no significant differences. However, there were high Pearson correlation and intraclass correlation coefficients (r= 0.924, ICC= 0.924; r= 0.944, ICC= 0.944, respectively. Nevertheless, all equations showed high correlations that ranged between 0.854 and 0.944. In conclusion, for estimation of 1-RM, the predictive equations based on Adams and O'Conner’s are valid in MMA athletes.

  14. An estimation of the influence of force decrease on the mean power spectral frequency shift of the EMG during repetitive maximum dynamic knee extensions.

    Science.gov (United States)

    Karlsson, J S; Ostlund, N; Larsson, B; Gerdle, B

    2003-10-01

    Frequency analysis of myoelectric (ME) signals, using the mean power spectral frequency (MNF), has been widely used to characterize peripheral muscle fatigue during isometric contractions assuming constant force. However, during repetitive isokinetic contractions performed with maximum effort, output (force or torque) will decrease markedly during the initial 40-60 contractions, followed by a phase with little or no change. MNF shows a similar pattern. In situations where there exist a significant relationship between MNF and output, part of the decrease in MNF may per se be related to the decrease in force during dynamic contractions. This study estimated force effects on the MNF shifts during repetitive dynamic knee extensions. Twenty healthy volunteers participated in the study and both surface ME signals (from the right vastus lateralis, vastus medialis, and rectus femoris muscles) and the biomechanical signals (force, position, and velocity) of an isokinetic dynamometer were measured. Two tests were performed: (i) 100 repetitive maximum isokinetic contractions of the right knee extensors, and (ii) five gradually increasing static knee extensions before and after (i). The corresponding ME signal time-frequency representations were calculated using the continuous wavelet transform. Compensation of the MNF variables of the repetitive contractions was performed with respect to the individual MNF-force relation based on an average of five gradually increasing contractions. Whether or not compensation was necessary was based on the shape of the MNF-force relationship. A significant compensation of the MNF was found for the repetitive isokinetic contractions. In conclusion, when investigating maximum dynamic contractions, decreases in MNF can be due to mechanisms similar to those found during sustained static contractions (force-independent component of fatigue) and in some subjects due to a direct effect of the change in force (force-dependent component of fatigue

  15. Longitudinal double-spin asymmetry $A_1^{\\rm p}$ and spin dependent structure function $g_1^{\\rm p}$ of the proton at small values of $x$ and $Q^2$

    CERN Document Server

    Aghasyan, M; The COMPASS collaboration; Alexeev, M G; Alexeev, G D; Amoroso, A; Andrieux, V; Anfimov, N V; Anosov, V; Antoshkin, A; Augsten, K; Augustyniak, W; Austregesilo, A; Azevedo, C D R; Badelek, B; Balestra, F; Ball, M; Barth, J; Beck, R; Bedfer, Y; Bernhard, J; Bicker, K; Bielert, E R; Birsa, R; Bodlak, M; Bordalo, P; Bradamante, F; Bressan, A; Buechele, M; Burtsev, V E; Chang, W -C; Chatterjee, C; Chiosso, M; Choi, I; Chumakov, A G; Chung, S -U; Cicuttin, A; Crespo, M L; Dalla Torre, S; Dasgupta, S S; Dasgupta, S; Denisov, O Yu; Dhara, L; Donskov, S V; Doshita, N; Dreisbach, Ch; Duennweber, W; Dusaev, R R; Dziewiecki, M; Efremov, A; Eversheim, P D; Faessler, M; Ferrero, A; Finger, M; Finger jr, M; Fischer, H; Franco, C; du Fresne von Hohenesche, N; Friedrich, J M; Frolov, V; Fuchey, E; Gautheron, F; Gavrichtchouk, O P; Gerassimov, S; Giarra, J; Giordano, F; Gnesi, I; Gorzellik, M; Grasso, A; Gridin, A; Grosse Perdekamp, M; Grube, B; Grussenmeyer, T; Guskov, A; Hahne, D; Hamar, G; von Harrach, D; Heinsius, F H; Heitz, R; Herrmann, F; Horikawa, N; d'Hose, N; Hsieh, C -Y; Huber, S; Ishimoto, S; Ivanov, A; Ivanshin, Yu; Iwata, T; Jary, V; Joosten, R; Joerg, P; Kabuss, E; Kerbizi, A; Ketzer, B; Khaustov, G V; Khokhlov, Yu A; Kisselev, Yu; Klein, F; Koivuniemi, J H; Kolosov, V N; Kondo, K; Koenigsmann, K; Konorov, I; Konstantinov, V F; Kotzinian, A M; Kouznetsov, O M; Kral, Z; Kraemer, M; Kremser, P; Krinner, F; Kroumchtein, Z V; Kulinich, Y; Kunne, F; Kurek, K; Kurjata, R P; Kuznetsov, I I; Kveton, A; Lednev, A A; Levchenko, E A; Levillain, M; Levorato, S; Lian, Y -S; Lichtenstadt, J; Longo, R; Lyubovitskij, V E; Maggiora, A; Magnon, A; Makins, N; Makke, N; Mallot, G K; Mamon, S A; Marianski, B; Martin, A; Marzec, J; Matousek, J; Matsuda, H; Matsuda, T; Meshcheryakov, G V; Meyer, M; Meyer, W; Mikhailov, Yu V; Mikhasenko, M; Mitrofavov, E; Mitrofanov, N; Miyachi, Y; Moretti, A; Nagaytsev, A; Nerling, F; Neyret, D; Novy, J; Nowak, W -D; Nukazuka, G; Nunes, A S; Olshevsky, A G; Orlov, I; Ostrick, M; Panzieri, D; Parsamyan, B; Paul, S; Peng, J -C; Pereira, F; Pesek, M; Peskova, M; Peshekhonov, D V; Pierre, N; Platchkov, S; Pochodzalla, J; Polyakov, V A; Pretz, J; Quaresma, M; Quintans, C; Ramos, S; Regali, C; Reicherz, G; Riedl, C; Rogacheva, N; Ryabchikov, D I; Rybnikov, A; Rychter, A; Salac, R; Samoylenko, V D; Sandacz, A; Santos, C; Sarkar, S; Savin, I A; Sawada, T; Sbrizzai, G; Schiavon, P; Schmidt, K; Schmieden, H; Schoenning, K; Seder, E; Selyunin, A; Silva, L; Sinha, L; Sirtl, S; Slunecka, M; Smolik, J; Srnka, A; Steffen, D; Stolarski, M; Subrt, O; Sulc, M; Suzuki, H; Szabelski, A; Szameitat, T; Sznajder, P; Tasevsky, M; Tessaro, S; Tessarotto, F; Thiel, A; Tomsa, J; Tosello, F; Tskhay, V; Uhl, S; Vasilishin, B I; Vauth, A; Veloso, J; Vidon, A; Virius, M; Wallner, S; Weisrock, T; Wilfert, M; ter Wolbeek, J; Zaremba, K; Zavada, P; Zavertyaev, M; Zemlyanichkina, E; Zhuravlev, N; Ziembicki, M

    2017-01-01

    We present a precise measurement of the proton longitudinal double-spin asymmetry $A_1^{\\rm p}$ and the proton spin-dependent structure function $g_1^{\\rm p}$ at photon virtualities $0.006~({\\rm GeV}/c)^2< Q^2< 1~ ({\\rm GeV}/c)^2$ in the Bjorken $x$ range of $4 \\times 10^{-5} < x < 4 \\times 10^{-2}$. The results are based on data collected by the COMPASS Collaboration at CERN using muon beam energies of $160~{\\rm GeV}$ and $200~ {\\rm GeV}$. The statistical precision is more than tenfold better than that of the previous measurement in this region. In the whole range of $x$, the measured values of $A_1^{\\rm p}$ and $g_1^{\\rm p}$ are found to be positive. It is for the first time that spin effects are found at such low values of $x$.

  16. Is repetition failure critical for the development of muscle hypertrophy and strength?

    Science.gov (United States)

    Sampson, J A; Groeller, H

    2016-04-01

    This investigation sought to determine the effect of resistance training to failure on functional, structural and neural elbow flexor muscle adaptation. Twenty-eight males completed a 4-week familiarization period and were then counterbalanced on the basis of responsiveness across; non-failure rapid shortening (RS; rapid concentric, 2 s eccentric), non-failure stretch-shortening (SSC; rapid concentric, rapid eccentric), and failure control (C, 2 s concentric, 2 s eccentric), for a 12-week unilateral elbow flexor resistance training regimen, 3 × week using 85% of one repetition maximum (1RM). 1RM, maximal voluntary contraction (MVC), muscle cross-sectional area (CSA), and muscle activation (EMG(RMS)) of the agonist, antagonist, and stabilizer muscles were assessed before and after the 12-week training period. The average number of repetitions per set was significantly lower in RS 4.2 [confidence interval (CI): 4.2, 4.3] and SSC 4.2 (CI: 4.2, 4.3) compared with C 6.1 (CI: 5.8, 6.4). A significant increase in 1RM (30.5%), MVC (13.3%), CSA (11.4%), and agonist EMG(RMS) (22.1%) was observed; however, no between-group differences were detected. In contrast, antagonist EMG(RMS) increased significantly in SSC (40.5%) and C (23.3%), but decreased in RS (13.5%). Similar adaptations across the three resistance training regimen suggest repetition failure is not critical to elicit significant neural and structural changes to skeletal muscle. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  17. The Spin Structure Function $g_1^{\\rm p}$ of the Proton and a Test of the Bjorken Sum Rule

    CERN Document Server

    Adolph, C.; Alexeev, M.G.; Alexeev, G.D.; Amoroso, A.; Andrieux, V.; Anosov, V.; Austregesilo, A.; Azevedo, C.; Badelek, B.; Balestra, F.; Barth, J.; Baum, G.; Beck, R.; Bedfer, Y.; Bernhard, J.; Bicker, K.; Bielert, E.R.; Birsa, R.; Bisplinghoff, J.; Bodlak, M.; Boer, M.; Bordalo, P.; Bradamante, F.; Braun, C.; Bressan, A.; Buchele, M.; Burtin, E.; Capozza, L.; Chang, W.C.; Chiosso, M.; Choi, I.; Chung, S.U.; Cicuttin, A.; Crespo, M.L.; Curiel, Q.; Dalla Torre, S.; Dasgupta, S.S.; Dasgupta, S.; Denisov, O.Yu.; Dhara, L.; Donskov, S.V.; Doshita, N.; Duic, V.; Dziewiecki, M.; Efremov, A.; Eversheim, P.D.; Eyrich, W.; Ferrero, A.; Finger, M.; M. Finger jr; Fischer, H.; Franco, C.; von Hohenesche, N. du Fresne; Friedrich, J.M.; Frolov, V.; Fuchey, E.; Gautheron, F.; Gavrichtchouk, O.P.; Gerassimov, S.; Giordano, F.; Gnesi, I.; Gorzellik, M.; Grabmuller, S.; Grasso, A.; Grosse-Perdekamp, M.; Grube, B.; Grussenmeyer, T.; Guskov, A.; Haas, F.; Hahne, D.; von Harrach, D.; Hashimoto, R.; Heinsius, F.H.; Herrmann, F.; Hinterberger, F.; Horikawa, N.; d'Hose, N.; Hsieh, C.Yu; Huber, S.; Ishimoto, S.; Ivanov, A.; Ivanshin, Yu.; Iwata, T.; Jahn, R.; Jary, V.; Jorg, P.; Joosten, R.; Kabuss, E.; Ketzer, B.; Khaustov, G.V.; Khokhlov, Yu. A.; Kisselev, Yu.; Klein, F.; Klimaszewski, K.; Koivuniemi, J.H.; Kolosov, V.N.; Kondo, K.; Konigsmann, K.; Konorov, I.; Konstantinov, V.F.; Kotzinian, A.M.; Kouznetsov, O.; Kramer, M.; Kremser, P.; Krinner, F.; Kroumchtein, Z.V.; Kuchinski, N.; Kunne, F.; Kurek, K.; Kurjata, R.P.; Lednev, A.A.; Lehmann, A.; Levillain, M.; Levorato, S.; Lichtenstadt, J.; Longo, R.; Maggiora, A.; Magnon, A.; Makins, N.; Makke, N.; Mallot, G.K.; Marchand, C.; Martin, A.; Marzec, J.; Matousek, J.; Matsuda, H.; Matsuda, T.; Meshcheryakov, G.; Meyer, W.; Michigami, T.; Mikhailov, Yu. V.; Miyachi, Y.; Nagaytsev, A.; Nagel, T.; Nerling, F.; Neyret, D.; Nikolaenko, V.I.; Novy, J.; Nowak, W.D.; Nunes, A.S.; Olshevsky, A.G.; Orlov, I.; Ostrick, M.; Panzieri, D.; Parsamyan, B.; Paul, S.; Peng, J.C.; Pereira, F.; Pesek, M.; Peshekhonov, D.V.; Platchkov, S.; Pochodzalla, J.; Polyakov, V.A.; Pretz, J.; Quaresma, M.; Quintans, C.; Ramos, S.; Regali, C.; Reicherz, G.; Riedl, C.; Rocco, E.; Rossiyskaya, N.S.; Ryabchikov, D.I.; Rychter, A.; Samoylenko, V.D.; Sandacz, A.; Santos, C.; Sarkar, S.; Savin, I.A.; Sbrizzai, G.; Schiavon, P.; Schmidt, K.; Schmieden, H.; Schonning, K.; Schopferer, S.; Selyunin, A.; Shevchenko, O.Yu.; Silva, L.; Sinha, L.; Sirtl, S.; Slunecka, M.; Sozzi, F.; Srnka, A.; Stolarski, M.; Sulc, M.; Suzuki, H.; Szabelski, A.; Szameitat, T.; Sznajder, P.; Takekawa, S.; Wolbeek, J. ter; Tessaro, S.; Tessarotto, F.; Thibaud, F.; Tosello, F.; Tskhay, V.; Uhl, S.; Veloso, J.; Virius, M.; Weisrock, T.; Wilfert, M.; Windmolders, R.; Zaremba, K.; Zavertyaev, M.; Zemlyanichkina, E.; Ziembicki, M.; Zink, A.

    2016-01-01

    New results for the double spin asymmetry $A_1^{\\rm p}$ and the proton longitudinal spin structure function $g_1^{\\rm p}$ are presented. They were obtained by the COMPASS collaboration using polarised 200 GeV muons scattered off a longitudinally polarised NH$_3$ target. The data were collected in 2011 and complement those recorded in 2007 at 160\\,GeV, in particular at lower values of $x$. They improve the statistical precision of $g_1^{\\rm p}(x)$ by about a factor of two in the region $x\\lesssim 0.02$. A next-to-leading order QCD fit to the $g_1$ world data is performed. It leads to a new determination of the quark spin contribution to the nucleon spin, $\\Delta \\Sigma$ ranging from 0.26 to 0.36, and to a re-evaluation of the first moment of $g_1^{\\rm p}$. The uncertainty of $\\Delta \\Sigma$ is mostly due to the large uncertainty in the present determinations of the gluon helicity distribution. A new evaluation of the Bjorken sum rule based on the COMPASS results for the non-singlet structure function $g_1^{\\rm...

  18. Longer repetition duration increases muscle activation and blood lactate response in matched resistance training protocols

    Directory of Open Access Journals (Sweden)

    Hugo Cesar Martins-Costa

    2016-03-01

    Full Text Available Abstract This study analyzed the effect of different repetition durations on electromyographic and blood lactate responses of the bench press exercise. Fifteen recreationally trained male volunteers completed two training protocols, matched for intensity (% one-repetition maximum; 1RM, number of sets, number of repetitions, and rest intervals. One of the protocols was performed with a repetition duration of 4 s (2 s concentric: 2 s eccentric; 2:2 protocol, whereas the second protocol had a repetition duration of 6 s (2 s concentric: 4 s eccentric; 2:4 protocol. The results showed higher normalized integrated electromyography (pectoralis major and triceps brachii for the 2:4 protocol. Blood lactate concentration was also higher in the 2:4 protocol across all sets. These results show that adding 2 s to the eccentric action in matched training protocols increases muscle activation and blood lactate response, which reinforces the notion that increasing repetition duration is an alternative load progression in resistance training.

  19. Low-load high-repetition resistance training improves strength and gait speed in middle-aged and older adults.

    Science.gov (United States)

    Nicholson, Vaughan P; McKean, Mark R; Burkett, Brendan J

    2015-09-01

    To determine the effect of 26 weeks of low-load high-repetition resistance training (BodyPump™) on maximal strength, gait speed, balance and self-reported health status in healthy, active middle-aged and older adults. Two-group randomised control trial. Sixty-eight apparently healthy, active adults aged over 55 years completed either 26 weeks of BodyPump™ training (PUMP) or served as control participants (CON). The BodyPump™ group (n = 32, age = 66 ± 4 years) trained twice per week for 26 weeks while the control group (n = 36, age = 66 ± 5 years) continued with their normal activities. Leg-press and Smith-machine bench-press one repetition maximum (1RM), gait speed, balance, and self-reported health status were all assessed at baseline and follow-up. Significant group-by-time interactions in favour of the BodyPump™ group were found for leg-press 1RM (PUMP + 13%, CON + 3%, p = 0.007, partial eta(2) = 0.11), Smith-machine bench-press 1RM (PUMP + 14%, CON +5%, p = 0.001, partial eta(2) = 0.18), normal gait speed (PUMP + 23%, CON +9 %, p = 0.028, partial eta(2) = 0.08) and single leg balance right (PUMP + 24%, CON - 7%, p = 0.006, partial eta(2) = 0.12). There were no group-by-time interactions for health status measures. Three participants in the BodyPump™ group withdrew from training due to injury or fear of injury related to training. Low-load high-repetition resistance training in the form of BodyPump™ is effective at improving maximal strength, gait speed and some aspects of standing balance in adults over 55 years. The training was well tolerated by the majority of participants. Copyright © 2014 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  20. Freeze-in Production of Sterile Neutrino Dark Matter in U(1)$_{\\rm B-L}$ Model

    CERN Document Server

    Biswas, Anirban

    2016-01-01

    With the advent of new and more sensitive direct detection experiments, scope for a thermal WIMP explanation of dark matter (DM) has become extremely constricted. The non-observation of thermal WIMP in these experiments has put a strong upper bound on WIMP-nucleon scattering cross section and within a few years it is likely to touch the neutrino floor. Hence in all probability, DM may have some non-thermal origin. In this work we explore in detail this possibility of a non-thermal sterile neutrino DM within the framework of U(1)$_{\\rm B-L}$ model. The U(1)$_{\\rm B-L}$ model on the other hand is a well-motivated and minimal way of extending the standard model so that it can explain the neutrino masses via Type-I see-saw mechanism. We have shown, besides explaining the neutrino mass, it can also accommodate a non-thermal sterile neutrino DM with correct relic density. In contrast with the existing literature, we have found that $W^\\pm$ decay can also be a dominant production mode of the sterile neutrino DM. To ...

  1. A comparison of muscle activity in concentric and counter movement maximum bench press.

    Science.gov (United States)

    van den Tillaar, Roland; Ettema, Gertjan

    2013-01-01

    The purpose of this study was to compare the kinematics and muscle activation patterns of regular free-weight bench press (counter movement) with pure concentric lifts in the ascending phase of a successful one repetition maximum (1-RM) attempt in the bench press. Our aim was to evaluate if diminishing potentiation could be the cause of the sticking region. Since diminishing potentiation cannot occur in pure concentric lifts, the occurrence of a sticking region in this type of muscle actions would support the hypothesis that the sticking region is due to a poor mechanical position. Eleven male participants (age 21.9 ± 1.7 yrs, body mass 80.7 ± 10.9 kg, body height 1.79 ± 0.07 m) conducted 1-RM lifts in counter movement and in pure concentric bench presses in which kinematics and EMG activity were measured. In both conditions, a sticking region occurred. However, the start of the sticking region was different between the two bench presses. In addition, in four of six muscles, the muscle activity was higher in the counter movement bench press compared to the concentric one. Considering the findings of the muscle activity of six muscles during the maximal lifts it was concluded that the diminishing effect of force potentiation, which occurs in the counter movement bench press, in combination with a delayed muscle activation unlikely explains the existence of the sticking region in a 1-RM bench press. Most likely, the sticking region is the result of a poor mechanical force position.

  2. Efeito de diferentes intervalos entre as tentativas do teste de 1-RM no desempenho de força máxima em mulheres

    Directory of Open Access Journals (Sweden)

    Rodney Coelho da Paixão

    2013-10-01

    Full Text Available O teste de uma repetição máxima (1-RM é frequentemente aplicado para medir a força de um indivíduo em um determinado exercício. O objetivo do presente estudo foi comparar o efeito de diferentes intervalos entre as tentativas do teste de 1-RM no desempenho de força máxima em mulheres no exercício leg press 45°. Para tanto, 12 voluntárias (19 ± 1 ano praticantes de exercícios resistidos há no mínimo seis meses foram submetidas a quatro sessões de testes, alternadas por no mínimo 48 horas de repouso. Os intervalos de recuperação entre as tentativas do teste de 1-RM foram de 30, 45, 60 e 180 segundos, sendo que a ordem de execução foi definida aleatoriamente. Para identificação da diferença entre os intervalos propostos foi aplicada a análise de variância ANOVA One-way (p < .05. Os resultados não revelaram diferenças significativas no desempenho de força máxima em mulheres, quando comparados os valores médios de teste obtidos em cada um dos intervalos propostos. Esses achados indicam que para a medida de força máxima no exercício leg press 45°, intervalos menores do que um minuto (30 - 45 segundos podem ser utilizados com a mesma precisão que intervalos maiores, garantindo maior economia de tempo para a aplicação do teste de 1-RM.

  3. ANÁLISIS COMPARATIVO DE LOS EFECTOS AGUDOS DE SESIONES DE ENTRENAMIENTO DE FUERZA CON CARGAS DEL 90 Y 30% 1 RM.

    Directory of Open Access Journals (Sweden)

    Jorge Dopico Calvo

    2010-10-01

    Full Text Available En una medición inicial (Pretest se obtuvo la 1RM de 23 sujetos masculinos en el ejercicio press banca, así como la potencia y fuerza media aplicada al 90 y 30% de 1RM (PMED90, FMED90, PMED30, FMED 30. Posteriormente 11 sujetos (Gr90 llevaron a cabo 2 sesiones de entrenamiento con cargas del 90%, mientras los 12 sujetos restantes (Gr30 lo hacían con cargas del 30%. Inmediatamente finalizada cada una de las sesiones se valoraba nuevamente PMED90, FMED90, PMED30, FMED30. Una semana después de la finalización de los entrenamientos se efectuó un Postest. Los resultados mostraron una mejora estadísticamente significativa del rendimiento de Gr30 al final de cada una de las sesiones de entrenamiento, respecto a Pretest y Postest, con el 90% de 1RM, mientras que Gr90 obtuvo mejoras significativas con el 30% respecto a Pretest, pero no respecto a Postest.
    PALABRAS CLAVE: fuerza, potencia, medición, efecto agudo.

  4. INVESTIGATING THE RELATIONSHIP BETWEEN SOME PERFORMANCE PARAMETERS AND ONE REPETITION MAXIMAL STRENGTH IN TRAINED ATHLETES

    Directory of Open Access Journals (Sweden)

    İbrahim CAN

    2016-12-01

    Full Text Available The purpose of this study was to investigate the relationship between some performance parameters and one repetition maximal strength in trained athletes. In accordance with this purpose, thirty four amateur athletes competed in football, volleyball, wrestling and kickboxing sport branches (age: 22,0 ± 3,03 years; height: 179,2 ± 0,06 cm; weight: 75,2 ± 8,9 kg; training experince: 9,0 ± 2,82 years have participated voluntarily in this study. Repeated sprint test, agility test, standing long jump test, vertical jump test and one repetition maximal (1RM tests were applied to subjects. To assessment of data, descriptive statistics and Pearson Correlation analysis methods were used to determine whether there was a relationship between some performance parameters and 1RM strength values in full back squat (SQ exercise. According to the analysis results, it was obtained that there wasn’t statistically significant relationship between standing long jump (r = ,157 and agility (r = - ,207 performances with 1RM strength values in full back SQ exercise of research group (p > 0,05. On the other hand, there was a positive, statistically significant relationship (p 0,05 relationships between 1RM strength values with total test duration (r = ,038 and fatigue index (r = ,142 in repeated sprint test.

  5. Efeito da massagem clássica na percepção subjetiva de dor, edema, amplitude articular e força máxima após dor muscular tardia induzida pelo exercício Effect of classical massage on subjective perceived soreness, edema, range of motion and maximum strength after delayed onset muscle soreness induced by exercise

    Directory of Open Access Journals (Sweden)

    César Cavinato Cal Abad

    2010-02-01

    maximum strength performance (1-RM after a muscle damage protocol. Eighteen males were divided into three groups (G1= massage-only, G2= protocol-only, G3= protocol + massage according to their 1-RM values. DOMS-inducing protocol consisted of 30 supramaximal eccentric contractions (6 sets of 5 repetitions at 110% 1RM. Immediately after the protocol, classical massage was performed in G3 for 6 minutes. DOMS, CIR, ADM were assessed 24, 48, 72 and 96 hours after the muscle damage protocol, and maximum strength was evaluated only after 48 and 96 hours. Results showed increase in DOMS and reduction in ADM and 1-RM values, in agreement with other studies using similar procedures. However, there was no difference between G2 and G3 in any of the assessed variables. It can be concluded that the muscle damage protocol used in this study was effective in causing alteration in the dependent variables observed. However, classical massage was not effective to minimize the symptoms associated to exercise induced muscle damage.

  6. Search for the $X_b$ and other hidden-beauty states in the $\\pi^+ \\pi^- \\Upsilon(1 \\rm S)$ channel at ATLAS

    CERN Document Server

    Aad, Georges; Abdallah, Jalal; Abdel Khalek, Samah; Abdinov, Ovsat; Aben, Rosemarie; Abi, Babak; Abolins, Maris; AbouZeid, Ossama; Abramowicz, Halina; Abreu, Henso; Abreu, Ricardo; Abulaiti, Yiming; Acharya, Bobby Samir; Adamczyk, Leszek; Adams, David; Adelman, Jahred; Adomeit, Stefanie; Adye, Tim; Agatonovic-Jovin, Tatjana; Aguilar-Saavedra, Juan Antonio; Agustoni, Marco; Ahlen, Steven; Ahmadov, Faig; Aielli, Giulio; Akerstedt, Henrik; Åkesson, Torsten Paul Ake; Akimoto, Ginga; Akimov, Andrei; Alberghi, Gian Luigi; Albert, Justin; Albrand, Solveig; Alconada Verzini, Maria Josefina; Aleksa, Martin; Aleksandrov, Igor; Alexa, Calin; Alexander, Gideon; Alexandre, Gauthier; Alexopoulos, Theodoros; Alhroob, Muhammad; Alimonti, Gianluca; Alio, Lion; Alison, John; Allbrooke, Benedict; Allison, Lee John; Allport, Phillip; Almond, John; Aloisio, Alberto; Alonso, Alejandro; Alonso, Francisco; Alpigiani, Cristiano; Altheimer, Andrew David; Alvarez Gonzalez, Barbara; Alviggi, Mariagrazia; Amako, Katsuya; Amaral Coutinho, Yara; Amelung, Christoph; Amidei, Dante; Amor Dos Santos, Susana Patricia; Amorim, Antonio; Amoroso, Simone; Amram, Nir; Amundsen, Glenn; Anastopoulos, Christos; Ancu, Lucian Stefan; Andari, Nansi; Andeen, Timothy; Anders, Christoph Falk; Anders, Gabriel; Anderson, Kelby; Andreazza, Attilio; Andrei, George Victor; Anduaga, Xabier; Angelidakis, Stylianos; Angelozzi, Ivan; Anger, Philipp; Angerami, Aaron; Anghinolfi, Francis; Anisenkov, Alexey; Anjos, Nuno; Annovi, Alberto; Antonaki, Ariadni; Antonelli, Mario; Antonov, Alexey; Antos, Jaroslav; Anulli, Fabio; Aoki, Masato; Aperio Bella, Ludovica; Apolle, Rudi; Arabidze, Giorgi; Aracena, Ignacio; Arai, Yasuo; Araque, Juan Pedro; Arce, Ayana; Arguin, Jean-Francois; Argyropoulos, Spyridon; Arik, Metin; Armbruster, Aaron James; Arnaez, Olivier; Arnal, Vanessa; Arnold, Hannah; Arratia, Miguel; Arslan, Ozan; Artamonov, Andrei; Artoni, Giacomo; Asai, Shoji; Asbah, Nedaa; Ashkenazi, Adi; Åsman, Barbro; Asquith, Lily; Assamagan, Ketevi; Astalos, Robert; Atkinson, Markus; Atlay, Naim Bora; Auerbach, Benjamin; Augsten, Kamil; Aurousseau, Mathieu; Avolio, Giuseppe; Azuelos, Georges; Azuma, Yuya; Baak, Max; Baas, Alessandra; Bacci, Cesare; Bachacou, Henri; Bachas, Konstantinos; Backes, Moritz; Backhaus, Malte; Backus Mayes, John; Badescu, Elisabeta; Bagiacchi, Paolo; Bagnaia, Paolo; Bai, Yu; Bain, Travis; Baines, John; Baker, Oliver Keith; Balek, Petr; Balli, Fabrice; Banas, Elzbieta; Banerjee, Swagato; Bannoura, Arwa A E; Bansal, Vikas; Bansil, Hardeep Singh; Barak, Liron; Baranov, Sergei; Barberio, Elisabetta Luigia; Barberis, Dario; Barbero, Marlon; Barillari, Teresa; Barisonzi, Marcello; Barklow, Timothy; Barlow, Nick; Barnett, Bruce; Barnett, Michael; Barnovska, Zuzana; Baroncelli, Antonio; Barone, Gaetano; Barr, Alan; Barreiro, Fernando; Barreiro Guimarães da Costa, João; Bartoldus, Rainer; Barton, Adam Edward; Bartos, Pavol; Bartsch, Valeria; Bassalat, Ahmed; Basye, Austin; Bates, Richard; Batley, Richard; Battaglia, Marco; Battistin, Michele; Bauer, Florian; Bawa, Harinder Singh; Beattie, Michael David; Beau, Tristan; Beauchemin, Pierre-Hugues; Beccherle, Roberto; Bechtle, Philip; Beck, Hans Peter; Becker, Anne Kathrin; Becker, Sebastian; Beckingham, Matthew; Becot, Cyril; Beddall, Andrew; Beddall, Ayda; Bedikian, Sourpouhi; Bednyakov, Vadim; Bee, Christopher; Beemster, Lars; Beermann, Thomas; Begel, Michael; Behr, Katharina; Belanger-Champagne, Camille; Bell, Paul; Bell, William; Bella, Gideon; Bellagamba, Lorenzo; Bellerive, Alain; Bellomo, Massimiliano; Belotskiy, Konstantin; Beltramello, Olga; Benary, Odette; Benchekroun, Driss; Bendtz, Katarina; Benekos, Nektarios; Benhammou, Yan; Benhar Noccioli, Eleonora; Benitez Garcia, Jorge-Armando; Benjamin, Douglas; Bensinger, James; Benslama, Kamal; Bentvelsen, Stan; Berge, David; Bergeaas Kuutmann, Elin; Berger, Nicolas; Berghaus, Frank; Beringer, Jürg; Bernard, Clare; Bernat, Pauline; Bernius, Catrin; Bernlochner, Florian Urs; Berry, Tracey; Berta, Peter; Bertella, Claudia; Bertoli, Gabriele; Bertolucci, Federico; Bertsche, Carolyn; Bertsche, David; Besana, Maria Ilaria; Besjes, Geert-Jan; Bessidskaia, Olga; Bessner, Martin Florian; Besson, Nathalie; Betancourt, Christopher; Bethke, Siegfried; Bhimji, Wahid; Bianchi, Riccardo-Maria; Bianchini, Louis; Bianco, Michele; Biebel, Otmar; Bieniek, Stephen Paul; Bierwagen, Katharina; Biesiada, Jed; Biglietti, Michela; Bilbao De Mendizabal, Javier; Bilokon, Halina; Bindi, Marcello; Binet, Sebastien; Bingul, Ahmet; Bini, Cesare; Black, Curtis; Black, James; Black, Kevin; Blackburn, Daniel; Blair, Robert; Blanchard, Jean-Baptiste; Blazek, Tomas; Bloch, Ingo; Blocker, Craig; Blum, Walter; Blumenschein, Ulrike; Bobbink, Gerjan; Bobrovnikov, Victor; Bocchetta, Simona Serena; Bocci, Andrea; Bock, Christopher; Boddy, Christopher Richard; Boehler, Michael; Boek, Thorsten Tobias; Bogaerts, Joannes Andreas; Bogdanchikov, Alexander; Bogouch, Andrei; Bohm, Christian; Bohm, Jan; Boisvert, Veronique; Bold, Tomasz; Boldea, Venera; Boldyrev, Alexey; Bomben, Marco; Bona, Marcella; Boonekamp, Maarten; Borisov, Anatoly; Borissov, Guennadi; Borri, Marcello; Borroni, Sara; Bortfeldt, Jonathan; Bortolotto, Valerio; Bos, Kors; Boscherini, Davide; Bosman, Martine; Boterenbrood, Hendrik; Boudreau, Joseph; Bouffard, Julian; Bouhova-Thacker, Evelina Vassileva; Boumediene, Djamel Eddine; Bourdarios, Claire; Bousson, Nicolas; Boutouil, Sara; Boveia, Antonio; Boyd, James; Boyko, Igor; Bozic, Ivan; Bracinik, Juraj; Brandt, Andrew; Brandt, Gerhard; Brandt, Oleg; Bratzler, Uwe; Brau, Benjamin; Brau, James; Braun, Helmut; Brazzale, Simone Federico; Brelier, Bertrand; Brendlinger, Kurt; Brennan, Amelia Jean; Brenner, Richard; Bressler, Shikma; Bristow, Kieran; Bristow, Timothy Michael; Britton, Dave; Brochu, Frederic; Brock, Ian; Brock, Raymond; Bromberg, Carl; Bronner, Johanna; Brooijmans, Gustaaf; Brooks, Timothy; Brooks, William; Brosamer, Jacquelyn; Brost, Elizabeth; Brown, Jonathan; Bruckman de Renstrom, Pawel; Bruncko, Dusan; Bruneliere, Renaud; Brunet, Sylvie; Bruni, Alessia; Bruni, Graziano; Bruschi, Marco; Bryngemark, Lene; Buanes, Trygve; Buat, Quentin; Bucci, Francesca; Buchholz, Peter; Buckingham, Ryan; Buckley, Andrew; Buda, Stelian Ioan; Budagov, Ioulian; Buehrer, Felix; Bugge, Lars; Bugge, Magnar Kopangen; Bulekov, Oleg; Bundock, Aaron Colin; Burckhart, Helfried; Burdin, Sergey; Burghgrave, Blake; Burke, Stephen; Burmeister, Ingo; Busato, Emmanuel; Büscher, Daniel; Büscher, Volker; Bussey, Peter; Buszello, Claus-Peter; Butler, Bart; Butler, John; Butt, Aatif Imtiaz; Buttar, Craig; Butterworth, Jonathan; Butti, Pierfrancesco; Buttinger, William; Buzatu, Adrian; Byszewski, Marcin; Cabrera Urbán, Susana; Caforio, Davide; Cakir, Orhan; Calafiura, Paolo; Calandri, Alessandro; Calderini, Giovanni; Calfayan, Philippe; Calkins, Robert; Caloba, Luiz; Calvet, David; Calvet, Samuel; Camacho Toro, Reina; Camarda, Stefano; Cameron, David; Caminada, Lea Michaela; Caminal Armadans, Roger; Campana, Simone; Campanelli, Mario; Campoverde, Angel; Canale, Vincenzo; Canepa, Anadi; Cano Bret, Marc; Cantero, Josu; Cantrill, Robert; Cao, Tingting; Capeans Garrido, Maria Del Mar; Caprini, Irinel; Caprini, Mihai; Capua, Marcella; Caputo, Regina; Cardarelli, Roberto; Carli, Tancredi; Carlino, Gianpaolo; Carminati, Leonardo; Caron, Sascha; Carquin, Edson; Carrillo-Montoya, German D; Carter, Janet; Carvalho, João; Casadei, Diego; Casado, Maria Pilar; Casolino, Mirkoantonio; Castaneda-Miranda, Elizabeth; Castelli, Angelantonio; Castillo Gimenez, Victoria; Castro, Nuno Filipe; Catastini, Pierluigi; Catinaccio, Andrea; Catmore, James; Cattai, Ariella; Cattani, Giordano; Caudron, Julien; Cavaliere, Viviana; Cavalli, Donatella; Cavalli-Sforza, Matteo; Cavasinni, Vincenzo; Ceradini, Filippo; Cerio, Benjamin; Cerny, Karel; Santiago Cerqueira, Augusto; Cerri, Alessandro; Cerrito, Lucio; Cerutti, Fabio; Cerv, Matevz; Cervelli, Alberto; Cetin, Serkant Ali; Chafaq, Aziz; Chakraborty, Dhiman; Chalupkova, Ina; Chang, Philip; Chapleau, Bertrand; Chapman, John Derek; Charfeddine, Driss; Charlton, Dave; Chau, Chav Chhiv; Chavez Barajas, Carlos Alberto; Cheatham, Susan; Chegwidden, Andrew; Chekanov, Sergei; Chekulaev, Sergey; Chelkov, Gueorgui; Chelstowska, Magda Anna; Chen, Chunhui; Chen, Hucheng; Chen, Karen; Chen, Liming; Chen, Shenjian; Chen, Xin; Chen, Ye; Chen, Yujiao; Cheng, Hok Chuen; Cheng, Yangyang; Cheplakov, Alexander; Cherkaoui El Moursli, Rajaa; Chernyatin, Valeriy; Cheu, Elliott; Chevalier, Laurent; Chiarella, Vitaliano; Chiefari, Giovanni; Childers, John Taylor; Chilingarov, Alexandre; Chiodini, Gabriele; Chisholm, Andrew; Chislett, Rebecca Thalatta; Chitan, Adrian; Chizhov, Mihail; Chouridou, Sofia; Chow, Bonnie Kar Bo; Chromek-Burckhart, Doris; Chu, Ming-Lee; Chudoba, Jiri; Chwastowski, Janusz; Chytka, Ladislav; Ciapetti, Guido; Ciftci, Abbas Kenan; Ciftci, Rena; Cinca, Diane; Cindro, Vladimir; Ciocio, Alessandra; Cirkovic, Predrag; Citron, Zvi Hirsh; Citterio, Mauro; Ciubancan, Mihai; Clark, Allan G; Clark, Philip James; Clarke, Robert; Cleland, Bill; Clemens, Jean-Claude; Clement, Christophe; Coadou, Yann; Cobal, Marina; Coccaro, Andrea; Cochran, James H; Coffey, Laurel; Cogan, Joshua Godfrey; Coggeshall, James; Cole, Brian; Cole, Stephen; Colijn, Auke-Pieter; Collot, Johann; Colombo, Tommaso; Colon, German; Compostella, Gabriele; Conde Muiño, Patricia; Coniavitis, Elias; Conidi, Maria Chiara; Connell, Simon Henry; Connelly, Ian; Consonni, Sofia Maria; Consorti, Valerio; Constantinescu, Serban; Conta, Claudio; Conti, Geraldine; Conventi, Francesco; Cooke, Mark; Cooper, Ben; Cooper-Sarkar, Amanda; Cooper-Smith, Neil; Copic, Katherine; Cornelissen, Thijs; Corradi, Massimo; Corriveau, Francois; Corso-Radu, Alina; Cortes-Gonzalez, Arely; Cortiana, Giorgio; Costa, Giuseppe; Costa, María José; Costanzo, Davide; Côté, David; Cottin, Giovanna; Cowan, Glen; Cox, Brian; Cranmer, Kyle; Cree, Graham; Crépé-Renaudin, Sabine; Crescioli, Francesco; Cribbs, Wayne Allen; Crispin Ortuzar, Mireia; Cristinziani, Markus; Croft, Vince; Crosetti, Giovanni; Cuciuc, Constantin-Mihai; Cuhadar Donszelmann, Tulay; Cummings, Jane; Curatolo, Maria; Cuthbert, Cameron; Czirr, Hendrik; Czodrowski, Patrick; Czyczula, Zofia; D'Auria, Saverio; D'Onofrio, Monica; Da Cunha Sargedas De Sousa, Mario Jose; Da Via, Cinzia; Dabrowski, Wladyslaw; Dafinca, Alexandru; Dai, Tiesheng; Dale, Orjan; Dallaire, Frederick; Dallapiccola, Carlo; Dam, Mogens; Daniells, Andrew Christopher; Dano Hoffmann, Maria; Dao, Valerio; Darbo, Giovanni; Darmora, Smita; Dassoulas, James; Dattagupta, Aparajita; Davey, Will; David, Claire; Davidek, Tomas; Davies, Eleanor; Davies, Merlin; Davignon, Olivier; Davison, Adam; Davison, Peter; Davygora, Yuriy; Dawe, Edmund; Dawson, Ian; Daya-Ishmukhametova, Rozmin; De, Kaushik; de Asmundis, Riccardo; De Castro, Stefano; De Cecco, Sandro; De Groot, Nicolo; de Jong, Paul; De la Torre, Hector; De Lorenzi, Francesco; De Nooij, Lucie; De Pedis, Daniele; De Salvo, Alessandro; De Sanctis, Umberto; De Santo, Antonella; De Vivie De Regie, Jean-Baptiste; Dearnaley, William James; Debbe, Ramiro; Debenedetti, Chiara; Dechenaux, Benjamin; Dedovich, Dmitri; Deigaard, Ingrid; Del Peso, Jose; Del Prete, Tarcisio; Deliot, Frederic; Delitzsch, Chris Malena; Deliyergiyev, Maksym; Dell'Acqua, Andrea; Dell'Asta, Lidia; Dell'Orso, Mauro; Della Pietra, Massimo; della Volpe, Domenico; Delmastro, Marco; Delsart, Pierre-Antoine; Deluca, Carolina; Demers, Sarah; Demichev, Mikhail; Demilly, Aurelien; Denisov, Sergey; Derendarz, Dominik; Derkaoui, Jamal Eddine; Derue, Frederic; Dervan, Paul; Desch, Klaus Kurt; Deterre, Cecile; Deviveiros, Pier-Olivier; Dewhurst, Alastair; Dhaliwal, Saminder; Di Ciaccio, Anna; Di Ciaccio, Lucia; Di Domenico, Antonio; Di Donato, Camilla; Di Girolamo, Alessandro; Di Girolamo, Beniamino; Di Mattia, Alessandro; Di Micco, Biagio; Di Nardo, Roberto; Di Simone, Andrea; Di Sipio, Riccardo; Di Valentino, David; Dias, Flavia; Diaz, Marco Aurelio; Diehl, Edward; Dietrich, Janet; Dietzsch, Thorsten; Diglio, Sara; Dimitrievska, Aleksandra; Dingfelder, Jochen; Dionisi, Carlo; Dita, Petre; Dita, Sanda; Dittus, Fridolin; Djama, Fares; Djobava, Tamar; Djuvsland, Julia Isabell; Barros do Vale, Maria Aline; Do Valle Wemans, André; Dobos, Daniel; Doglioni, Caterina; Doherty, Tom; Dohmae, Takeshi; Dolejsi, Jiri; Dolezal, Zdenek; Dolgoshein, Boris; Donadelli, Marisilvia; Donati, Simone; Dondero, Paolo; Donini, Julien; Dopke, Jens; Doria, Alessandra; Dova, Maria-Teresa; Doyle, Tony; Dris, Manolis; Dubbert, Jörg; Dube, Sourabh; Dubreuil, Emmanuelle; Duchovni, Ehud; Duckeck, Guenter; Ducu, Otilia Anamaria; Duda, Dominik; Dudarev, Alexey; Dudziak, Fanny; Duflot, Laurent; Duguid, Liam; Dührssen, Michael; Dunford, Monica; Duran Yildiz, Hatice; Düren, Michael; Durglishvili, Archil; Dwuznik, Michal; Dyndal, Mateusz; Ebke, Johannes; Edson, William; Edwards, Nicholas Charles; Ehrenfeld, Wolfgang; Eifert, Till; Eigen, Gerald; Einsweiler, Kevin; Ekelof, Tord; El Kacimi, Mohamed; Ellert, Mattias; Elles, Sabine; Ellinghaus, Frank; Ellis, Nicolas; Elmsheuser, Johannes; Elsing, Markus; Emeliyanov, Dmitry; Enari, Yuji; Endner, Oliver Chris; Endo, Masaki; Engelmann, Roderich; Erdmann, Johannes; Ereditato, Antonio; Eriksson, Daniel; Ernis, Gunar; Ernst, Jesse; Ernst, Michael; Ernwein, Jean; Errede, Deborah; Errede, Steven; Ertel, Eugen; Escalier, Marc; Esch, Hendrik; Escobar, Carlos; Esposito, Bellisario; Etienvre, Anne-Isabelle; Etzion, Erez; Evans, Hal; Ezhilov, Alexey; Fabbri, Laura; Facini, Gabriel; Fakhrutdinov, Rinat; Falciano, Speranza; Falla, Rebecca Jane; Faltova, Jana; Fang, Yaquan; Fanti, Marcello; Farbin, Amir; Farilla, Addolorata; Farooque, Trisha; Farrell, Steven; Farrington, Sinead; Farthouat, Philippe; Fassi, Farida; Fassnacht, Patrick; Fassouliotis, Dimitrios; Favareto, Andrea; Fayard, Louis; Federic, Pavol; Fedin, Oleg; Fedorko, Wojciech; Fehling-Kaschek, Mirjam; Feigl, Simon; Feligioni, Lorenzo; Feng, Cunfeng; Feng, Eric; Feng, Haolu; Fenyuk, Alexander; Fernandez Perez, Sonia; Ferrag, Samir; Ferrando, James; Ferrari, Arnaud; Ferrari, Pamela; Ferrari, Roberto; Ferreira de Lima, Danilo Enoque; Ferrer, Antonio; Ferrere, Didier; Ferretti, Claudio; Ferretto Parodi, Andrea; Fiascaris, Maria; Fiedler, Frank; Filipčič, Andrej; Filipuzzi, Marco; Filthaut, Frank; Fincke-Keeler, Margret; Finelli, Kevin Daniel; Fiolhais, Miguel; Fiorini, Luca; Firan, Ana; Fischer, Adam; Fischer, Julia; Fisher, Wade Cameron; Fitzgerald, Eric Andrew; Flechl, Martin; Fleck, Ivor; Fleischmann, Philipp; Fleischmann, Sebastian; Fletcher, Gareth Thomas; Fletcher, Gregory; Flick, Tobias; Floderus, Anders; Flores Castillo, Luis; Florez Bustos, Andres Carlos; Flowerdew, Michael; Formica, Andrea; Forti, Alessandra; Fortin, Dominique; Fournier, Daniel; Fox, Harald; Fracchia, Silvia; Francavilla, Paolo; Franchini, Matteo; Franchino, Silvia; Francis, David; Franconi, Laura; Franklin, Melissa; Franz, Sebastien; Fraternali, Marco; French, Sky; Friedrich, Conrad; Friedrich, Felix; Froidevaux, Daniel; Frost, James; Fukunaga, Chikara; Fullana Torregrosa, Esteban; Fulsom, Bryan Gregory; Fuster, Juan; Gabaldon, Carolina; Gabizon, Ofir; Gabrielli, Alessandro; Gabrielli, Andrea; Gadatsch, Stefan; Gadomski, Szymon; Gagliardi, Guido; Gagnon, Pauline; Galea, Cristina; Galhardo, Bruno; Gallas, Elizabeth; Gallo, Valentina Santina; Gallop, Bruce; Gallus, Petr; Galster, Gorm Aske Gram Krohn; Gan, KK; Gao, Jun; Gao, Yongsheng; Garay Walls, Francisca; Garberson, Ford; García, Carmen; García Navarro, José Enrique; Garcia-Sciveres, Maurice; Gardner, Robert; Garelli, Nicoletta; Garonne, Vincent; Gatti, Claudio; Gaudio, Gabriella; Gaur, Bakul; Gauthier, Lea; Gauzzi, Paolo; Gavrilenko, Igor; Gay, Colin; Gaycken, Goetz; Gazis, Evangelos; Ge, Peng; Gecse, Zoltan; Gee, Norman; Geerts, Daniël Alphonsus Adrianus; Geich-Gimbel, Christoph; Gellerstedt, Karl; Gemme, Claudia; Gemmell, Alistair; Genest, Marie-Hélène; Gentile, Simonetta; George, Matthias; George, Simon; Gerbaudo, Davide; Gershon, Avi; Ghazlane, Hamid; Ghodbane, Nabil; Giacobbe, Benedetto; Giagu, Stefano; Giangiobbe, Vincent; Giannetti, Paola; Gianotti, Fabiola; Gibbard, Bruce; Gibson, Stephen; Gilchriese, Murdock; Gillam, Thomas; Gillberg, Dag; Gilles, Geoffrey; Gingrich, Douglas; Giokaris, Nikos; Giordani, MarioPaolo; Giordano, Raffaele; Giorgi, Filippo Maria; Giorgi, Francesco Michelangelo; Giraud, Pierre-Francois; Giugni, Danilo; Giuliani, Claudia; Giulini, Maddalena; Gjelsten, Børge Kile; Gkaitatzis, Stamatios; Gkialas, Ioannis; Gladilin, Leonid; Glasman, Claudia; Glatzer, Julian; Glaysher, Paul; Glazov, Alexandre; Glonti, George; Goblirsch-Kolb, Maximilian; Goddard, Jack Robert; Godlewski, Jan; Goeringer, Christian; Goldfarb, Steven; Golling, Tobias; Golubkov, Dmitry; Gomes, Agostinho; Gomez Fajardo, Luz Stella; Gonçalo, Ricardo; Goncalves Pinto Firmino Da Costa, Joao; Gonella, Laura; González de la Hoz, Santiago; Gonzalez Parra, Garoe; Gonzalez-Sevilla, Sergio; Goossens, Luc; Gorbounov, Petr Andreevich; Gordon, Howard; Gorelov, Igor; Gorini, Benedetto; Gorini, Edoardo; Gorišek, Andrej; Gornicki, Edward; Goshaw, Alfred; Gössling, Claus; Gostkin, Mikhail Ivanovitch; Gouighri, Mohamed; Goujdami, Driss; Goulette, Marc Phillippe; Goussiou, Anna; Goy, Corinne; Gozpinar, Serdar; Grabas, Herve Marie Xavier; Graber, Lars; Grabowska-Bold, Iwona; Grafström, Per; Grahn, Karl-Johan; Gramling, Johanna; Gramstad, Eirik; Grancagnolo, Sergio; Grassi, Valerio; Gratchev, Vadim; Gray, Heather; Graziani, Enrico; Grebenyuk, Oleg; Greenwood, Zeno Dixon; Gregersen, Kristian; Gregor, Ingrid-Maria; Grenier, Philippe; Griffiths, Justin; Grillo, Alexander; Grimm, Kathryn; Grinstein, Sebastian; Gris, Philippe Luc Yves; Grishkevich, Yaroslav; Grivaz, Jean-Francois; Grohs, Johannes Philipp; Grohsjean, Alexander; Gross, Eilam; Grosse-Knetter, Joern; Grossi, Giulio Cornelio; Groth-Jensen, Jacob; Grout, Zara Jane; Guan, Liang; Guenther, Jaroslav; Guescini, Francesco; Guest, Daniel; Gueta, Orel; Guicheney, Christophe; Guido, Elisa; Guillemin, Thibault; Guindon, Stefan; Gul, Umar; Gumpert, Christian; Guo, Jun; Gupta, Shaun; Gutierrez, Phillip; Gutierrez Ortiz, Nicolas Gilberto; Gutschow, Christian; Guttman, Nir; Guyot, Claude; Gwenlan, Claire; Gwilliam, Carl; Haas, Andy; Haber, Carl; Hadavand, Haleh Khani; Haddad, Nacim; Haefner, Petra; Hageböck, Stephan; Hajduk, Zbigniew; Hakobyan, Hrachya; Haleem, Mahsana; Hall, David; Halladjian, Garabed; Hamacher, Klaus; Hamal, Petr; Hamano, Kenji; Hamer, Matthias; Hamilton, Andrew; Hamilton, Samuel; Hamity, Guillermo Nicolas; Hamnett, Phillip George; Han, Liang; Hanagaki, Kazunori; Hanawa, Keita; Hance, Michael; Hanke, Paul; Hanna, Remie; Hansen, Jørgen Beck; Hansen, Jorn Dines; Hansen, Peter Henrik; Hara, Kazuhiko; Hard, Andrew; Harenberg, Torsten; Hariri, Faten; Harkusha, Siarhei; Harper, Devin; Harrington, Robert; Harris, Orin; Harrison, Paul Fraser; Hartjes, Fred; Hasegawa, Makoto; Hasegawa, Satoshi; Hasegawa, Yoji; Hasib, A; Hassani, Samira; Haug, Sigve; Hauschild, Michael; Hauser, Reiner; Havranek, Miroslav; Hawkes, Christopher; Hawkings, Richard John; Hawkins, Anthony David; Hayashi, Takayasu; Hayden, Daniel; Hays, Chris; Hayward, Helen; Haywood, Stephen; Head, Simon; Heck, Tobias; Hedberg, Vincent; Heelan, Louise; Heim, Sarah; Heim, Timon; Heinemann, Beate; Heinrich, Lukas; Hejbal, Jiri; Helary, Louis; Heller, Claudio; Heller, Matthieu; Hellman, Sten; Hellmich, Dennis; Helsens, Clement; Henderson, James; Henderson, Robert; Heng, Yang; Hengler, Christopher; Henrichs, Anna; Henriques Correia, Ana Maria; Henrot-Versille, Sophie; Herbert, Geoffrey Henry; Hernández Jiménez, Yesenia; Herrberg-Schubert, Ruth; Herten, Gregor; Hertenberger, Ralf; Hervas, Luis; Hesketh, Gavin Grant; Hessey, Nigel; Hickling, Robert; Higón-Rodriguez, Emilio; Hill, Ewan; Hill, John; Hiller, Karl Heinz; Hillert, Sonja; Hillier, Stephen; Hinchliffe, Ian; Hines, Elizabeth; Hirose, Minoru; Hirschbuehl, Dominic; Hobbs, John; Hod, Noam; Hodgkinson, Mark; Hodgson, Paul; Hoecker, Andreas; Hoeferkamp, Martin; Hoenig, Friedrich; Hoffman, Julia; Hoffmann, Dirk; Hohlfeld, Marc; Holmes, Tova Ray; Hong, Tae Min; Hooft van Huysduynen, Loek; Hopkins, Walter; Horii, Yasuyuki; Hostachy, Jean-Yves; Hou, Suen; Hoummada, Abdeslam; Howard, Jacob; Howarth, James; Hrabovsky, Miroslav; Hristova, Ivana; Hrivnac, Julius; Hryn'ova, Tetiana; Hsu, Catherine; Hsu, Pai-hsien Jennifer; Hsu, Shih-Chieh; Hu, Diedi; Hu, Xueye; Huang, Yanping; Hubacek, Zdenek; Hubaut, Fabrice; Huegging, Fabian; Huffman, Todd Brian; Hughes, Emlyn; Hughes, Gareth; Huhtinen, Mika; Hülsing, Tobias Alexander; Hurwitz, Martina; Huseynov, Nazim; Huston, Joey; Huth, John; Iacobucci, Giuseppe; Iakovidis, Georgios; Ibragimov, Iskander; Iconomidou-Fayard, Lydia; Ideal, Emma; Idrissi, Zineb; Iengo, Paolo; Igonkina, Olga; Iizawa, Tomoya; Ikegami, Yoichi; Ikematsu, Katsumasa; Ikeno, Masahiro; Ilchenko, Iurii; Iliadis, Dimitrios; Ilic, Nikolina; Inamaru, Yuki; Ince, Tayfun; Ioannou, Pavlos; Iodice, Mauro; Iordanidou, Kalliopi; Ippolito, Valerio; Irles Quiles, Adrian; Isaksson, Charlie; Ishino, Masaya; Ishitsuka, Masaki; Ishmukhametov, Renat; Issever, Cigdem; Istin, Serhat; Iturbe Ponce, Julia Mariana; Iuppa, Roberto; Ivarsson, Jenny; Iwanski, Wieslaw; Iwasaki, Hiroyuki; Izen, Joseph; Izzo, Vincenzo; Jackson, Brett; Jackson, Matthew; Jackson, Paul; Jaekel, Martin; Jain, Vivek; Jakobs, Karl; Jakobsen, Sune; Jakoubek, Tomas; Jakubek, Jan; Jamin, David Olivier; Jana, Dilip; Jansen, Eric; Jansen, Hendrik; Janssen, Jens; Janus, Michel; Jarlskog, Göran; Javadov, Namig; Javůrek, Tomáš; Jeanty, Laura; Jejelava, Juansher; Jeng, Geng-yuan; Jennens, David; Jenni, Peter; Jentzsch, Jennifer; Jeske, Carl; Jézéquel, Stéphane; Ji, Haoshuang; Jia, Jiangyong; Jiang, Yi; Jimenez Belenguer, Marcos; Jin, Shan; Jinaru, Adam; Jinnouchi, Osamu; Joergensen, Morten Dam; Johansson, Erik; Johansson, Per; Johns, Kenneth; Jon-And, Kerstin; Jones, Graham; Jones, Roger; Jones, Tim; Jongmanns, Jan; Jorge, Pedro; Joshi, Kiran Daniel; Jovicevic, Jelena; Ju, Xiangyang; Jung, Christian; Jungst, Ralph Markus; Jussel, Patrick; Juste Rozas, Aurelio; Kaci, Mohammed; Kaczmarska, Anna; Kado, Marumi; Kagan, Harris; Kagan, Michael; Kajomovitz, Enrique; Kalderon, Charles William; Kama, Sami; Kamenshchikov, Andrey; Kanaya, Naoko; Kaneda, Michiru; Kaneti, Steven; Kantserov, Vadim; Kanzaki, Junichi; Kaplan, Benjamin; Kapliy, Anton; Kar, Deepak; Karakostas, Konstantinos; Karastathis, Nikolaos; Kareem, Mohammad Jawad; Karnevskiy, Mikhail; Karpov, Sergey; Karpova, Zoya; Karthik, Krishnaiyengar; Kartvelishvili, Vakhtang; Karyukhin, Andrey; Kashif, Lashkar; Kasieczka, Gregor; Kass, Richard; Kastanas, Alex; Kataoka, Yousuke; Katre, Akshay; Katzy, Judith; Kaushik, Venkatesh; Kawagoe, Kiyotomo; Kawamoto, Tatsuo; Kawamura, Gen; Kazama, Shingo; Kazanin, Vassili; Kazarinov, Makhail; Keeler, Richard; Kehoe, Robert; Keil, Markus; Keller, John; Kempster, Jacob Julian; Keoshkerian, Houry; Kepka, Oldrich; Kerševan, Borut Paul; Kersten, Susanne; Kessoku, Kohei; Keung, Justin; Khalil-zada, Farkhad; Khandanyan, Hovhannes; Khanov, Alexander; Khodinov, Alexander; Khomich, Andrei; Khoo, Teng Jian; Khoriauli, Gia; Khoroshilov, Andrey; Khovanskiy, Valery; Khramov, Evgeniy; Khubua, Jemal; Kim, Hee Yeun; Kim, Hyeon Jin; Kim, Shinhong; Kimura, Naoki; Kind, Oliver; King, Barry; King, Matthew; King, Robert Steven Beaufoy; King, Samuel Burton; Kirk, Julie; Kiryunin, Andrey; Kishimoto, Tomoe; Kisielewska, Danuta; Kiss, Florian; Kittelmann, Thomas; Kiuchi, Kenji; Kladiva, Eduard; Klein, Max; Klein, Uta; Kleinknecht, Konrad; Klimek, Pawel; Klimentov, Alexei; Klingenberg, Reiner; Klinger, Joel Alexander; Klioutchnikova, Tatiana; Klok, Peter; Kluge, Eike-Erik; Kluit, Peter; Kluth, Stefan; Kneringer, Emmerich; Knoops, Edith; Knue, Andrea; Kobayashi, Dai; Kobayashi, Tomio; Kobel, Michael; Kocian, Martin; Kodys, Peter; Koevesarki, Peter; Koffas, Thomas; Koffeman, Els; Kogan, Lucy Anne; Kohlmann, Simon; Kohout, Zdenek; Kohriki, Takashi; Koi, Tatsumi; Kolanoski, Hermann; Koletsou, Iro; Koll, James; Komar, Aston; Komori, Yuto; Kondo, Takahiko; Kondrashova, Nataliia; Köneke, Karsten; König, Adriaan; König, Sebastian; Kono, Takanori; Konoplich, Rostislav; Konstantinidis, Nikolaos; Kopeliansky, Revital; Koperny, Stefan; Köpke, Lutz; Kopp, Anna Katharina; Korcyl, Krzysztof; Kordas, Kostantinos; Korn, Andreas; Korol, Aleksandr; Korolkov, Ilya; Korolkova, Elena; Korotkov, Vladislav; Kortner, Oliver; Kortner, Sandra; Kostyukhin, Vadim; Kotov, Vladislav; Kotwal, Ashutosh; Kourkoumelis, Christine; Kouskoura, Vasiliki; Koutsman, Alex; Kowalewski, Robert Victor; Kowalski, Tadeusz; Kozanecki, Witold; Kozhin, Anatoly; Kral, Vlastimil; Kramarenko, Viktor; Kramberger, Gregor; Krasnopevtsev, Dimitriy; Krasny, Mieczyslaw Witold; Krasznahorkay, Attila; Kraus, Jana; Kravchenko, Anton; Kreiss, Sven; Kretz, Moritz; Kretzschmar, Jan; Kreutzfeldt, Kristof; Krieger, Peter; Kroeninger, Kevin; Kroha, Hubert; Kroll, Joe; Kroseberg, Juergen; Krstic, Jelena; Kruchonak, Uladzimir; Krüger, Hans; Kruker, Tobias; Krumnack, Nils; Krumshteyn, Zinovii; Kruse, Amanda; Kruse, Mark; Kruskal, Michael; Kubota, Takashi; Kucuk, Hilal; Kuday, Sinan; Kuehn, Susanne; Kugel, Andreas; Kuhl, Andrew; Kuhl, Thorsten; Kukhtin, Victor; Kulchitsky, Yuri; Kuleshov, Sergey; Kuna, Marine; Kunkle, Joshua; Kupco, Alexander; Kurashige, Hisaya; Kurochkin, Yurii; Kurumida, Rie; Kus, Vlastimil; Kuwertz, Emma Sian; Kuze, Masahiro; Kvita, Jiri; La Rosa, Alessandro; La Rotonda, Laura; Lacasta, Carlos; Lacava, Francesco; Lacey, James; Lacker, Heiko; Lacour, Didier; Lacuesta, Vicente Ramón; Ladygin, Evgueni; Lafaye, Remi; Laforge, Bertrand; Lagouri, Theodota; Lai, Stanley; Laier, Heiko; Lambourne, Luke; Lammers, Sabine; Lampen, Caleb; Lampl, Walter; Lançon, Eric; Landgraf, Ulrich; Landon, Murrough; Lang, Valerie Susanne; Lankford, Andrew; Lanni, Francesco; Lantzsch, Kerstin; Laplace, Sandrine; Lapoire, Cecile; Laporte, Jean-Francois; Lari, Tommaso; Lasagni Manghi, Federico; Lassnig, Mario; Laurelli, Paolo; Lavrijsen, Wim; Law, Alexander; Laycock, Paul; Le Dortz, Olivier; Le Guirriec, Emmanuel; Le Menedeu, Eve; LeCompte, Thomas; Ledroit-Guillon, Fabienne Agnes Marie; Lee, Claire Alexandra; Lee, Hurng-Chun; Lee, Jason; Lee, Shih-Chang; Lee, Lawrence; Lefebvre, Guillaume; Lefebvre, Michel; Legger, Federica; Leggett, Charles; Lehan, Allan; Lehmacher, Marc; Lehmann Miotto, Giovanna; Lei, Xiaowen; Leight, William Axel; Leisos, Antonios; Leister, Andrew Gerard; Leite, Marco Aurelio Lisboa; Leitner, Rupert; Lellouch, Daniel; Lemmer, Boris; Leney, Katharine; Lenz, Tatjana; Lenzen, Georg; Lenzi, Bruno; Leone, Robert; Leone, Sandra; Leonidopoulos, Christos; Leontsinis, Stefanos; Leroy, Claude; Lester, Christopher; Lester, Christopher Michael; Levchenko, Mikhail; Levêque, Jessica; Levin, Daniel; Levinson, Lorne; Levy, Mark; Lewis, Adrian; Lewis, George; Leyko, Agnieszka; Leyton, Michael; Li, Bing; Li, Bo; Li, Haifeng; Li, Ho Ling; Li, Lei; Li, Liang; Li, Shu; Li, Yichen; Liang, Zhijun; Liao, Hongbo; Liberti, Barbara; Lichard, Peter; Lie, Ki; Liebal, Jessica; Liebig, Wolfgang; Limbach, Christian; Limosani, Antonio; Lin, Simon; Lin, Tai-Hua; Linde, Frank; Lindquist, Brian Edward; Linnemann, James; Lipeles, Elliot; Lipniacka, Anna; Lisovyi, Mykhailo; Liss, Tony; Lissauer, David; Lister, Alison; Litke, Alan; Liu, Bo; Liu, Dong; Liu, Jianbei; Liu, Kun; Liu, Lulu; Liu, Miaoyuan; Liu, Minghui; Liu, Yanwen; Livan, Michele; Livermore, Sarah; Lleres, Annick; Llorente Merino, Javier; Lloyd, Stephen; Lo Sterzo, Francesco; Lobodzinska, Ewelina; Loch, Peter; Lockman, William; Loebinger, Fred; Loevschall-Jensen, Ask Emil; Loginov, Andrey; Lohse, Thomas; Lohwasser, Kristin; Lokajicek, Milos; Lombardo, Vincenzo Paolo; Long, Brian Alexander; Long, Jonathan; Long, Robin Eamonn; Lopes, Lourenco; Lopez Mateos, David; Lopez Paredes, Brais; Lopez Paz, Ivan; Lorenz, Jeanette; Lorenzo Martinez, Narei; Losada, Marta; Loscutoff, Peter; Lou, XinChou; Lounis, Abdenour; Love, Jeremy; Love, Peter; Lowe, Andrew; Lu, Feng; Lu, Nan; Lubatti, Henry; Luci, Claudio; Lucotte, Arnaud; Luehring, Frederick; Lukas, Wolfgang; Luminari, Lamberto; Lundberg, Olof; Lund-Jensen, Bengt; Lungwitz, Matthias; Lynn, David; Lysak, Roman; Lytken, Else; Ma, Hong; Ma, Lian Liang; Maccarrone, Giovanni; Macchiolo, Anna; Machado Miguens, Joana; Macina, Daniela; Madaffari, Daniele; Madar, Romain; Maddocks, Harvey Jonathan; Mader, Wolfgang; Madsen, Alexander; Maeno, Mayuko; Maeno, Tadashi; Maevskiy, Artem; Magradze, Erekle; Mahboubi, Kambiz; Mahlstedt, Joern; Mahmoud, Sara; Maiani, Camilla; Maidantchik, Carmen; Maier, Andreas Alexander; Maio, Amélia; Majewski, Stephanie; Makida, Yasuhiro; Makovec, Nikola; Mal, Prolay; Malaescu, Bogdan; Malecki, Pawel; Maleev, Victor; Malek, Fairouz; Mallik, Usha; Malon, David; Malone, Caitlin; Maltezos, Stavros; Malyshev, Vladimir; Malyukov, Sergei; Mamuzic, Judita; Mandelli, Beatrice; Mandelli, Luciano; Mandić, Igor; Mandrysch, Rocco; Maneira, José; Manfredini, Alessandro; Manhaes de Andrade Filho, Luciano; Manjarres Ramos, Joany Andreina; Mann, Alexander; Manning, Peter; Manousakis-Katsikakis, Arkadios; Mansoulie, Bruno; Mantifel, Rodger; Mapelli, Livio; March, Luis; Marchand, Jean-Francois; Marchiori, Giovanni; Marcisovsky, Michal; Marino, Christopher; Marjanovic, Marija; Marques, Carlos; Marroquim, Fernando; Marsden, Stephen Philip; Marshall, Zach; Marti, Lukas Fritz; Marti-Garcia, Salvador; Martin, Brian; Martin, Brian Thomas; Martin, Tim; Martin, Victoria Jane; Martin dit Latour, Bertrand; Martinez, Homero; Martinez, Mario; Martin-Haugh, Stewart; Martyniuk, Alex; Marx, Marilyn; Marzano, Francesco; Marzin, Antoine; Masetti, Lucia; Mashimo, Tetsuro; Mashinistov, Ruslan; Masik, Jiri; Maslennikov, Alexey; Massa, Ignazio; Massa, Lorenzo; Massol, Nicolas; Mastrandrea, Paolo; Mastroberardino, Anna; Masubuchi, Tatsuya; Mättig, Peter; Mattmann, Johannes; Maurer, Julien; Maxfield, Stephen; Maximov, Dmitriy; Mazini, Rachid; Mazzaferro, Luca; Mc Goldrick, Garrin; Mc Kee, Shawn Patrick; McCarn, Allison; McCarthy, Robert; McCarthy, Tom; McCubbin, Norman; McFarlane, Kenneth; Mcfayden, Josh; Mchedlidze, Gvantsa; McMahon, Steve; McPherson, Robert; Mechnich, Joerg; Medinnis, Michael; Meehan, Samuel; Mehlhase, Sascha; Mehta, Andrew; Meier, Karlheinz; Meineck, Christian; Meirose, Bernhard; Melachrinos, Constantinos; Mellado Garcia, Bruce Rafael; Meloni, Federico; Mengarelli, Alberto; Menke, Sven; Meoni, Evelin; Mercurio, Kevin Michael; Mergelmeyer, Sebastian; Meric, Nicolas; Mermod, Philippe; Merola, Leonardo; Meroni, Chiara; Merritt, Frank; Merritt, Hayes; Messina, Andrea; Metcalfe, Jessica; Mete, Alaettin Serhan; Meyer, Carsten; Meyer, Christopher; Meyer, Jean-Pierre; Meyer, Jochen; Middleton, Robin; Migas, Sylwia; Mijović, Liza; Mikenberg, Giora; Mikestikova, Marcela; Mikuž, Marko; Milic, Adriana; Miller, David; Mills, Corrinne; Milov, Alexander; Milstead, David; Milstein, Dmitry; Minaenko, Andrey; Minami, Yuto; Minashvili, Irakli; Mincer, Allen; Mindur, Bartosz; Mineev, Mikhail; Ming, Yao; Mir, Lluisa-Maria; Mirabelli, Giovanni; Mitani, Takashi; Mitrevski, Jovan; Mitsou, Vasiliki A; Mitsui, Shingo; Miucci, Antonio; Miyagawa, Paul; Mjörnmark, Jan-Ulf; Moa, Torbjoern; Mochizuki, Kazuya; Mohapatra, Soumya; Mohr, Wolfgang; Molander, Simon; Moles-Valls, Regina; Mönig, Klaus; Monini, Caterina; Monk, James; Monnier, Emmanuel; Montejo Berlingen, Javier; Monticelli, Fernando; Monzani, Simone; Moore, Roger; Morange, Nicolas; Moreno, Deywis; Moreno Llácer, María; Morettini, Paolo; Morgenstern, Marcus; Morii, Masahiro; Moritz, Sebastian; Morley, Anthony Keith; Mornacchi, Giuseppe; Morris, John; Morvaj, Ljiljana; Moser, Hans-Guenther; Mosidze, Maia; Moss, Josh; Motohashi, Kazuki; Mount, Richard; Mountricha, Eleni; Mouraviev, Sergei; Moyse, Edward; Muanza, Steve; Mudd, Richard; Mueller, Felix; Mueller, James; Mueller, Klemens; Mueller, Thibaut; Mueller, Timo; Muenstermann, Daniel; Munwes, Yonathan; Murillo Quijada, Javier Alberto; Murray, Bill; Musheghyan, Haykuhi; Musto, Elisa; Myagkov, Alexey; Myska, Miroslav; Nackenhorst, Olaf; Nadal, Jordi; Nagai, Koichi; Nagai, Ryo; Nagai, Yoshikazu; Nagano, Kunihiro; Nagarkar, Advait; Nagasaka, Yasushi; Nagel, Martin; Nairz, Armin Michael; Nakahama, Yu; Nakamura, Koji; Nakamura, Tomoaki; Nakano, Itsuo; Namasivayam, Harisankar; Nanava, Gizo; Narayan, Rohin; Nattermann, Till; Naumann, Thomas; Navarro, Gabriela; Nayyar, Ruchika; Neal, Homer; Nechaeva, Polina; Neep, Thomas James; Nef, Pascal Daniel; Negri, Andrea; Negri, Guido; Negrini, Matteo; Nektarijevic, Snezana; Nellist, Clara; Nelson, Andrew; Nelson, Timothy Knight; Nemecek, Stanislav; Nemethy, Peter; Nepomuceno, Andre Asevedo; Nessi, Marzio; Neubauer, Mark; Neumann, Manuel; Neves, Ricardo; Nevski, Pavel; Newman, Paul; Nguyen, Duong Hai; Nickerson, Richard; Nicolaidou, Rosy; Nicquevert, Bertrand; Nielsen, Jason; Nikiforou, Nikiforos; Nikiforov, Andriy; Nikolaenko, Vladimir; Nikolic-Audit, Irena; Nikolics, Katalin; Nikolopoulos, Konstantinos; Nilsson, Paul; Ninomiya, Yoichi; Nisati, Aleandro; Nisius, Richard; Nobe, Takuya; Nodulman, Lawrence; Nomachi, Masaharu; Nomidis, Ioannis; Norberg, Scarlet; Nordberg, Markus; Novgorodova, Olga; Nowak, Sebastian; Nozaki, Mitsuaki; Nozka, Libor; Ntekas, Konstantinos; Nunes Hanninger, Guilherme; Nunnemann, Thomas; Nurse, Emily; Nuti, Francesco; O'Brien, Brendan Joseph; O'grady, Fionnbarr; O'Neil, Dugan; O'Shea, Val; Oakham, Gerald; Oberlack, Horst; Obermann, Theresa; Ocariz, Jose; Ochi, Atsuhiko; Ochoa, Ines; Oda, Susumu; Odaka, Shigeru; Ogren, Harold; Oh, Alexander; Oh, Seog; Ohm, Christian; Ohman, Henrik; Okamura, Wataru; Okawa, Hideki; Okumura, Yasuyuki; Okuyama, Toyonobu; Olariu, Albert; Olchevski, Alexander; Olivares Pino, Sebastian Andres; Oliveira Damazio, Denis; Oliver Garcia, Elena; Olszewski, Andrzej; Olszowska, Jolanta; Onofre, António; Onyisi, Peter; Oram, Christopher; Oreglia, Mark; Oren, Yona; Orestano, Domizia; Orlando, Nicola; Oropeza Barrera, Cristina; Orr, Robert; Osculati, Bianca; Ospanov, Rustem; Otero y Garzon, Gustavo; Otono, Hidetoshi; Ouchrif, Mohamed; Ouellette, Eric; Ould-Saada, Farid; Ouraou, Ahmimed; Oussoren, Koen Pieter; Ouyang, Qun; Ovcharova, Ana; Owen, Mark; Ozcan, Veysi Erkcan; Ozturk, Nurcan; Pachal, Katherine; Pacheco Pages, Andres; Padilla Aranda, Cristobal; Pagáčová, Martina; Pagan Griso, Simone; Paganis, Efstathios; Pahl, Christoph; Paige, Frank; Pais, Preema; Pajchel, Katarina; Palacino, Gabriel; Palestini, Sandro; Palka, Marek; Pallin, Dominique; Palma, Alberto; Palmer, Jody; Pan, Yibin; Panagiotopoulou, Evgenia; Panduro Vazquez, William; Pani, Priscilla; Panikashvili, Natalia; Panitkin, Sergey; Pantea, Dan; Paolozzi, Lorenzo; Papadopoulou, Theodora; Papageorgiou, Konstantinos; Paramonov, Alexander; Paredes Hernandez, Daniela; Parker, Michael Andrew; Parodi, Fabrizio; Parsons, John; Parzefall, Ulrich; Pasqualucci, Enrico; Passaggio, Stefano; Passeri, Antonio; Pastore, Fernanda; Pastore, Francesca; Pásztor, Gabriella; Pataraia, Sophio; Patel, Nikhul; Pater, Joleen; Patricelli, Sergio; Pauly, Thilo; Pearce, James; Pedersen, Lars Egholm; Pedersen, Maiken; Pedraza Lopez, Sebastian; Pedro, Rute; Peleganchuk, Sergey; Pelikan, Daniel; Peng, Haiping; Penning, Bjoern; Penwell, John; Perepelitsa, Dennis; Perez Codina, Estel; Pérez García-Estañ, María Teresa; Perez Reale, Valeria; Perini, Laura; Pernegger, Heinz; Perrella, Sabrina; Perrino, Roberto; Peschke, Richard; Peshekhonov, Vladimir; Peters, Krisztian; Peters, Yvonne; Petersen, Brian; Petersen, Troels; Petit, Elisabeth; Petridis, Andreas; Petridou, Chariclia; Petrolo, Emilio; Petrucci, Fabrizio; Pettersson, Nora Emilia; Pezoa, Raquel; Phillips, Peter William; Piacquadio, Giacinto; Pianori, Elisabetta; Picazio, Attilio; Piccaro, Elisa; Piccinini, Maurizio; Piegaia, Ricardo; Pignotti, David; Pilcher, James; Pilkington, Andrew; Pina, João Antonio; Pinamonti, Michele; Pinder, Alex; Pinfold, James; Pingel, Almut; Pinto, Belmiro; Pires, Sylvestre; Pitt, Michael; Pizio, Caterina; Plazak, Lukas; Pleier, Marc-Andre; Pleskot, Vojtech; Plotnikova, Elena; Plucinski, Pawel; Poddar, Sahill; Podlyski, Fabrice; Poettgen, Ruth; Poggioli, Luc; Pohl, David-leon; Pohl, Martin; Polesello, Giacomo; Policicchio, Antonio; Polifka, Richard; Polini, Alessandro; Pollard, Christopher Samuel; Polychronakos, Venetios; Pommès, Kathy; Pontecorvo, Ludovico; Pope, Bernard; Popeneciu, Gabriel Alexandru; Popovic, Dragan; Poppleton, Alan; Portell Bueso, Xavier; Pospisil, Stanislav; Potamianos, Karolos; Potrap, Igor; Potter, Christina; Potter, Christopher; Poulard, Gilbert; Poveda, Joaquin; Pozdnyakov, Valery; Pralavorio, Pascal; Pranko, Aliaksandr; Prasad, Srivas; Pravahan, Rishiraj; Prell, Soeren; Price, Darren; Price, Joe; Price, Lawrence; Prieur, Damien; Primavera, Margherita; Proissl, Manuel; Prokofiev, Kirill; Prokoshin, Fedor; Protopapadaki, Eftychia-sofia; Protopopescu, Serban; Proudfoot, James; Przybycien, Mariusz; Przysiezniak, Helenka; Ptacek, Elizabeth; Puddu, Daniele; Pueschel, Elisa; Puldon, David; Purohit, Milind; Puzo, Patrick; Qian, Jianming; Qin, Gang; Qin, Yang; Quadt, Arnulf; Quarrie, David; Quayle, William; Queitsch-Maitland, Michaela; Quilty, Donnchadha; Qureshi, Anum; Radeka, Veljko; Radescu, Voica; Radhakrishnan, Sooraj Krishnan; Radloff, Peter; Rados, Pere; Ragusa, Francesco; Rahal, Ghita; Rajagopalan, Srinivasan; Rammensee, Michael; Randle-Conde, Aidan Sean; Rangel-Smith, Camila; Rao, Kanury; Rauscher, Felix; Rave, Tobias Christian; Ravenscroft, Thomas; Raymond, Michel; Read, Alexander Lincoln; Readioff, Nathan Peter; Rebuzzi, Daniela; Redelbach, Andreas; Redlinger, George; Reece, Ryan; Reeves, Kendall; Rehnisch, Laura; Reisin, Hernan; Relich, Matthew; Rembser, Christoph; Ren, Huan; Ren, Zhongliang; Renaud, Adrien; Rescigno, Marco; Resconi, Silvia; Rezanova, Olga; Reznicek, Pavel; Rezvani, Reyhaneh; Richter, Robert; Ridel, Melissa; Rieck, Patrick; Rieger, Julia; Rijssenbeek, Michael; Rimoldi, Adele; Rinaldi, Lorenzo; Ritsch, Elmar; Riu, Imma; Rizatdinova, Flera; Rizvi, Eram; Robertson, Steven; Robichaud-Veronneau, Andree; Robinson, Dave; Robinson, James; Robson, Aidan; Roda, Chiara; Rodrigues, Luis; Roe, Shaun; Røhne, Ole; Rolli, Simona; Romaniouk, Anatoli; Romano, Marino; Romero Adam, Elena; Rompotis, Nikolaos; Ronzani, Manfredi; Roos, Lydia; Ros, Eduardo; Rosati, Stefano; Rosbach, Kilian; Rose, Matthew; Rose, Peyton; Rosendahl, Peter Lundgaard; Rosenthal, Oliver; Rossetti, Valerio; Rossi, Elvira; Rossi, Leonardo Paolo; Rosten, Rachel; Rotaru, Marina; Roth, Itamar; Rothberg, Joseph; Rousseau, David; Royon, Christophe; Rozanov, Alexandre; Rozen, Yoram; Ruan, Xifeng; Rubbo, Francesco; Rubinskiy, Igor; Rud, Viacheslav; Rudolph, Christian; Rudolph, Matthew Scott; Rühr, Frederik; Ruiz-Martinez, Aranzazu; Rurikova, Zuzana; Rusakovich, Nikolai; Ruschke, Alexander; Rutherfoord, John; Ruthmann, Nils; Ryabov, Yury; Rybar, Martin; Rybkin, Grigori; Ryder, Nick; Saavedra, Aldo; Sacerdoti, Sabrina; Saddique, Asif; Sadeh, Iftach; Sadrozinski, Hartmut; Sadykov, Renat; Safai Tehrani, Francesco; Sakamoto, Hiroshi; Sakurai, Yuki; Salamanna, Giuseppe; Salamon, Andrea; Saleem, Muhammad; Salek, David; Sales De Bruin, Pedro Henrique; Salihagic, Denis; Salnikov, Andrei; Salt, José; Salvatore, Daniela; Salvatore, Pasquale Fabrizio; Salvucci, Antonio; Salzburger, Andreas; Sampsonidis, Dimitrios; Sanchez, Arturo; Sánchez, Javier; Sanchez Martinez, Victoria; Sandaker, Heidi; Sandbach, Ruth Laura; Sander, Heinz Georg; Sanders, Michiel; Sandhoff, Marisa; Sandoval, Tanya; Sandoval, Carlos; Sandstroem, Rikard; Sankey, Dave; Sansoni, Andrea; Santoni, Claudio; Santonico, Rinaldo; Santos, Helena; Santoyo Castillo, Itzebelt; Sapp, Kevin; Sapronov, Andrey; Saraiva, João; Sarrazin, Bjorn; Sartisohn, Georg; Sasaki, Osamu; Sasaki, Yuichi; Sauvage, Gilles; Sauvan, Emmanuel; Savard, Pierre; Savu, Dan Octavian; Sawyer, Craig; Sawyer, Lee; Saxon, David; Saxon, James; Sbarra, Carla; Sbrizzi, Antonio; Scanlon, Tim; Scannicchio, Diana; Scarcella, Mark; Scarfone, Valerio; Schaarschmidt, Jana; Schacht, Peter; Schaefer, Douglas; Schaefer, Ralph; Schaepe, Steffen; Schaetzel, Sebastian; Schäfer, Uli; Schaffer, Arthur; Schaile, Dorothee; Schamberger, R~Dean; Scharf, Veit; Schegelsky, Valery; Scheirich, Daniel; Schernau, Michael; Scherzer, Max; Schiavi, Carlo; Schieck, Jochen; Schillo, Christian; Schioppa, Marco; Schlenker, Stefan; Schmidt, Evelyn; Schmieden, Kristof; Schmitt, Christian; Schmitt, Sebastian; Schneider, Basil; Schnellbach, Yan Jie; Schnoor, Ulrike; Schoeffel, Laurent; Schoening, Andre; Schoenrock, Bradley Daniel; Schorlemmer, Andre Lukas; Schott, Matthias; Schouten, Doug; Schovancova, Jaroslava; Schramm, Steven; Schreyer, Manuel; Schroeder, Christian; Schuh, Natascha; Schultens, Martin Johannes; Schultz-Coulon, Hans-Christian; Schulz, Holger; Schumacher, Markus; Schumm, Bruce; Schune, Philippe; Schwanenberger, Christian; Schwartzman, Ariel; Schwarz, Thomas Andrew; Schwegler, Philipp; Schwemling, Philippe; Schwienhorst, Reinhard; Schwindling, Jerome; Schwindt, Thomas; Schwoerer, Maud; Sciacca, Gianfranco; Scifo, Estelle; Sciolla, Gabriella; Scott, Bill; Scuri, Fabrizio; Scutti, Federico; Searcy, Jacob; Sedov, George; Sedykh, Evgeny; Seidel, Sally; Seiden, Abraham; Seifert, Frank; Seixas, José; Sekhniaidze, Givi; Sekula, Stephen; Selbach, Karoline Elfriede; Seliverstov, Dmitry; Sellers, Graham; Semprini-Cesari, Nicola; Serfon, Cedric; Serin, Laurent; Serkin, Leonid; Serre, Thomas; Seuster, Rolf; Severini, Horst; Sfiligoj, Tina; Sforza, Federico; Sfyrla, Anna; Shabalina, Elizaveta; Shamim, Mansoora; Shan, Lianyou; Shang, Ruo-yu; Shank, James; Shapiro, Marjorie; Shatalov, Pavel; Shaw, Kate; Shehu, Ciwake Yusufu; Sherwood, Peter; Shi, Liaoshan; Shimizu, Shima; Shimmin, Chase Owen; Shimojima, Makoto; Shiyakova, Mariya; Shmeleva, Alevtina; Shochet, Mel; Short, Daniel; Shrestha, Suyog; Shulga, Evgeny; Shupe, Michael; Shushkevich, Stanislav; Sicho, Petr; Sidiropoulou, Ourania; Sidorov, Dmitri; Sidoti, Antonio; Siegert, Frank; Sijacki, Djordje; Silva, José; Silver, Yiftah; Silverstein, Daniel; Silverstein, Samuel; Simak, Vladislav; Simard, Olivier; Simic, Ljiljana; Simion, Stefan; Simioni, Eduard; Simmons, Brinick; Simoniello, Rosa; Simonyan, Margar; Sinervo, Pekka; Sinev, Nikolai; Sipica, Valentin; Siragusa, Giovanni; Sircar, Anirvan; Sisakyan, Alexei; Sivoklokov, Serguei; Sjölin, Jörgen; Sjursen, Therese; Skottowe, Hugh Philip; Skovpen, Kirill; Skubic, Patrick; Slater, Mark; Slavicek, Tomas; Sliwa, Krzysztof; Smakhtin, Vladimir; Smart, Ben; Smestad, Lillian; Smirnov, Sergei; Smirnov, Yury; Smirnova, Lidia; Smirnova, Oxana; Smith, Kenway; Smizanska, Maria; Smolek, Karel; Snesarev, Andrei; Snidero, Giacomo; Snyder, Scott; Sobie, Randall; Socher, Felix; Soffer, Abner; Soh, Dart-yin; Solans, Carlos; Solar, Michael; Solc, Jaroslav; Soldatov, Evgeny; Soldevila, Urmila; Solodkov, Alexander; Soloshenko, Alexei; Solovyanov, Oleg; Solovyev, Victor; Sommer, Philip; Song, Hong Ye; Soni, Nitesh; Sood, Alexander; Sopczak, Andre; Sopko, Bruno; Sopko, Vit; Sorin, Veronica; Sosebee, Mark; Soualah, Rachik; Soueid, Paul; Soukharev, Andrey; South, David; Spagnolo, Stefania; Spanò, Francesco; Spearman, William Robert; Spettel, Fabian; Spighi, Roberto; Spigo, Giancarlo; Spiller, Laurence Anthony; Spousta, Martin; Spreitzer, Teresa; Spurlock, Barry; St Denis, Richard Dante; Staerz, Steffen; Stahlman, Jonathan; Stamen, Rainer; Stamm, Soren; Stanecka, Ewa; Stanek, Robert; Stanescu, Cristian; Stanescu-Bellu, Madalina; Stanitzki, Marcel Michael; Stapnes, Steinar; Starchenko, Evgeny; Stark, Jan; Staroba, Pavel; Starovoitov, Pavel; Staszewski, Rafal; Stavina, Pavel; Steinberg, Peter; Stelzer, Bernd; Stelzer, Harald Joerg; Stelzer-Chilton, Oliver; Stenzel, Hasko; Stern, Sebastian; Stewart, Graeme; Stillings, Jan Andre; Stockton, Mark; Stoebe, Michael; Stoicea, Gabriel; Stolte, Philipp; Stonjek, Stefan; Stradling, Alden; Straessner, Arno; Stramaglia, Maria Elena; Strandberg, Jonas; Strandberg, Sara; Strandlie, Are; Strauss, Emanuel; Strauss, Michael; Strizenec, Pavol; Ströhmer, Raimund; Strom, David; Stroynowski, Ryszard; Strubig, Antonia; Stucci, Stefania Antonia; Stugu, Bjarne; Styles, Nicholas Adam; Su, Dong; Su, Jun; Subramaniam, Rajivalochan; Succurro, Antonella; Sugaya, Yorihito; Suhr, Chad; Suk, Michal; Sulin, Vladimir; Sultansoy, Saleh; Sumida, Toshi; Sun, Siyuan; Sun, Xiaohu; Sundermann, Jan Erik; Suruliz, Kerim; Susinno, Giancarlo; Sutton, Mark; Suzuki, Yu; Svatos, Michal; Swedish, Stephen; Swiatlowski, Maximilian; Sykora, Ivan; Sykora, Tomas; Ta, Duc; Taccini, Cecilia; Tackmann, Kerstin; Taenzer, Joe; Taffard, Anyes; Tafirout, Reda; Taiblum, Nimrod; Takai, Helio; Takashima, Ryuichi; Takeda, Hiroshi; Takeshita, Tohru; Takubo, Yosuke; Talby, Mossadek; Talyshev, Alexey; Tam, Jason; Tan, Kong Guan; Tanaka, Junichi; Tanaka, Reisaburo; Tanaka, Satoshi; Tanaka, Shuji; Tanasijczuk, Andres Jorge; Tannenwald, Benjamin Bordy; Tannoury, Nancy; Tapprogge, Stefan; Tarem, Shlomit; Tarrade, Fabien; Tartarelli, Giuseppe Francesco; Tas, Petr; Tasevsky, Marek; Tashiro, Takuya; Tassi, Enrico; Tavares Delgado, Ademar; Tayalati, Yahya; Taylor, Frank; Taylor, Geoffrey; Taylor, Wendy; Teischinger, Florian Alfred; Teixeira Dias Castanheira, Matilde; Teixeira-Dias, Pedro; Temming, Kim Katrin; Ten Kate, Herman; Teng, Ping-Kun; Teoh, Jia Jian; Terada, Susumu; Terashi, Koji; Terron, Juan; Terzo, Stefano; Testa, Marianna; Teuscher, Richard; Therhaag, Jan; Theveneaux-Pelzer, Timothée; Thomas, Juergen; Thomas-Wilsker, Joshuha; Thompson, Emily; Thompson, Paul; Thompson, Peter; Thompson, Ray; Thompson, Stan; Thomsen, Lotte Ansgaard; Thomson, Evelyn; Thomson, Mark; Thong, Wai Meng; Thun, Rudolf; Tian, Feng; Tibbetts, Mark James; Tikhomirov, Vladimir; Tikhonov, Yury; Timoshenko, Sergey; Tiouchichine, Elodie; Tipton, Paul; Tisserant, Sylvain; Todorov, Theodore; Todorova-Nova, Sharka; Toggerson, Brokk; Tojo, Junji; Tokár, Stanislav; Tokushuku, Katsuo; Tollefson, Kirsten; Tolley, Emma; Tomlinson, Lee; Tomoto, Makoto; Tompkins, Lauren; Toms, Konstantin; Topilin, Nikolai; Torrence, Eric; Torres, Heberth; Torró Pastor, Emma; Toth, Jozsef; Touchard, Francois; Tovey, Daniel; Tran, Huong Lan; Trefzger, Thomas; Tremblet, Louis; Tricoli, Alessandro; Trigger, Isabel Marian; Trincaz-Duvoid, Sophie; Tripiana, Martin; Trischuk, William; Trocmé, Benjamin; Troncon, Clara; Trottier-McDonald, Michel; Trovatelli, Monica; True, Patrick; Trzebinski, Maciej; Trzupek, Adam; Tsarouchas, Charilaos; Tseng, Jeffrey; Tsiareshka, Pavel; Tsionou, Dimitra; Tsipolitis, Georgios; Tsirintanis, Nikolaos; Tsiskaridze, Shota; Tsiskaridze, Vakhtang; Tskhadadze, Edisher; Tsukerman, Ilya; Tsulaia, Vakhtang; Tsuno, Soshi; Tsybychev, Dmitri; Tudorache, Alexandra; Tudorache, Valentina; Tuna, Alexander Naip; Tupputi, Salvatore; Turchikhin, Semen; Turecek, Daniel; Turk Cakir, Ilkay; Turra, Ruggero; Tuts, Michael; Tykhonov, Andrii; Tylmad, Maja; Tyndel, Mike; Uchida, Kirika; Ueda, Ikuo; Ueno, Ryuichi; Ughetto, Michael; Ugland, Maren; Uhlenbrock, Mathias; Ukegawa, Fumihiko; Unal, Guillaume; Undrus, Alexander; Unel, Gokhan; Ungaro, Francesca; Unno, Yoshinobu; Unverdorben, Christopher; Urbaniec, Dustin; Urquijo, Phillip; Usai, Giulio; Usanova, Anna; Vacavant, Laurent; Vacek, Vaclav; Vachon, Brigitte; Valencic, Nika; Valentinetti, Sara; Valero, Alberto; Valery, Loic; Valkar, Stefan; Valladolid Gallego, Eva; Vallecorsa, Sofia; Valls Ferrer, Juan Antonio; Van Den Wollenberg, Wouter; Van Der Deijl, Pieter; van der Geer, Rogier; van der Graaf, Harry; Van Der Leeuw, Robin; van der Ster, Daniel; van Eldik, Niels; van Gemmeren, Peter; Van Nieuwkoop, Jacobus; van Vulpen, Ivo; van Woerden, Marius Cornelis; Vanadia, Marco; Vandelli, Wainer; Vanguri, Rami; Vaniachine, Alexandre; Vankov, Peter; Vannucci, Francois; Vardanyan, Gagik; Vari, Riccardo; Varnes, Erich; Varol, Tulin; Varouchas, Dimitris; Vartapetian, Armen; Varvell, Kevin; Vazeille, Francois; Vazquez Schroeder, Tamara; Veatch, Jason; Veloso, Filipe; Velz, Thomas; Veneziano, Stefano; Ventura, Andrea; Ventura, Daniel; Venturi, Manuela; Venturi, Nicola; Venturini, Alessio; Vercesi, Valerio; Verducci, Monica; Verkerke, Wouter; Vermeulen, Jos; Vest, Anja; Vetterli, Michel; Viazlo, Oleksandr; Vichou, Irene; Vickey, Trevor; Vickey Boeriu, Oana Elena; Viehhauser, Georg; Viel, Simon; Vigne, Ralph; Villa, Mauro; Villaplana Perez, Miguel; Vilucchi, Elisabetta; Vincter, Manuella; Vinogradov, Vladimir; Virzi, Joseph; Vivarelli, Iacopo; Vives Vaque, Francesc; Vlachos, Sotirios; Vladoiu, Dan; Vlasak, Michal; Vogel, Adrian; Vogel, Marcelo; Vokac, Petr; Volpi, Guido; Volpi, Matteo; von der Schmitt, Hans; von Radziewski, Holger; von Toerne, Eckhard; Vorobel, Vit; Vorobev, Konstantin; Vos, Marcel; Voss, Rudiger; Vossebeld, Joost; Vranjes, Nenad; Vranjes Milosavljevic, Marija; Vrba, Vaclav; Vreeswijk, Marcel; Vu Anh, Tuan; Vuillermet, Raphael; Vukotic, Ilija; Vykydal, Zdenek; Wagner, Peter; Wagner, Wolfgang; Wahlberg, Hernan; Wahrmund, Sebastian; Wakabayashi, Jun; Walder, James; Walker, Rodney; Walkowiak, Wolfgang; Wall, Richard; Waller, Peter; Walsh, Brian; Wang, Chao; Wang, Chiho; Wang, Fuquan; Wang, Haichen; Wang, Hulin; Wang, Jike; Wang, Jin; Wang, Kuhan; Wang, Rui; Wang, Song-Ming; Wang, Tan; Wang, Xiaoxiao; Wanotayaroj, Chaowaroj; Warburton, Andreas; Ward, Patricia; Wardrope, David Robert; Warsinsky, Markus; Washbrook, Andrew; Wasicki, Christoph; Watkins, Peter; Watson, Alan; Watson, Ian; Watson, Miriam; Watts, Gordon; Watts, Stephen; Waugh, Ben; Webb, Samuel; Weber, Michele; Weber, Stefan Wolf; Webster, Jordan S; Weidberg, Anthony; Weigell, Philipp; Weinert, Benjamin; Weingarten, Jens; Weiser, Christian; Weits, Hartger; Wells, Phillippa; Wenaus, Torre; Wendland, Dennis; Weng, Zhili; Wengler, Thorsten; Wenig, Siegfried; Wermes, Norbert; Werner, Matthias; Werner, Per; Wessels, Martin; Wetter, Jeffrey; Whalen, Kathleen; White, Andrew; White, Martin; White, Ryan; White, Sebastian; Whiteson, Daniel; Wicke, Daniel; Wickens, Fred; Wiedenmann, Werner; Wielers, Monika; Wienemann, Peter; Wiglesworth, Craig; Wiik-Fuchs, Liv Antje Mari; Wijeratne, Peter Alexander; Wildauer, Andreas; Wildt, Martin Andre; Wilkens, Henric George; Will, Jonas Zacharias; Williams, Hugh; Williams, Sarah; Willis, Christopher; Willocq, Stephane; Wilson, Alan; Wilson, John; Wingerter-Seez, Isabelle; Winklmeier, Frank; Winter, Benedict Tobias; Wittgen, Matthias; Wittig, Tobias; Wittkowski, Josephine; Wollstadt, Simon Jakob; Wolter, Marcin Wladyslaw; Wolters, Helmut; Wosiek, Barbara; Wotschack, Jorg; Woudstra, Martin; Wozniak, Krzysztof; Wright, Michael; Wu, Mengqing; Wu, Sau Lan; Wu, Xin; Wu, Yusheng; Wulf, Evan; Wyatt, Terry Richard; Wynne, Benjamin; Xella, Stefania; Xiao, Meng; Xu, Da; Xu, Lailin; Yabsley, Bruce; Yacoob, Sahal; Yakabe, Ryota; Yamada, Miho; Yamaguchi, Hiroshi; Yamaguchi, Yohei; Yamamoto, Akira; Yamamoto, Kyoko; Yamamoto, Shimpei; Yamamura, Taiki; Yamanaka, Takashi; Yamauchi, Katsuya; Yamazaki, Yuji; Yan, Zhen; Yang, Haijun; Yang, Hongtao; Yang, Un-Ki; Yang, Yi; Yanush, Serguei; Yao, Liwen; Yao, Weiming; Yasu, Yoshiji; Yatsenko, Elena; Yau Wong, Kaven Henry; Ye, Jingbo; Ye, Shuwei; Yeletskikh, Ivan; Yen, Andy L; Yildirim, Eda; Yilmaz, Metin; Yoosoofmiya, Reza; Yorita, Kohei; Yoshida, Rikutaro; Yoshihara, Keisuke; Young, Charles; Young, Christopher John; Youssef, Saul; Yu, David Ren-Hwa; Yu, Jaehoon; Yu, Jiaming; Yu, Jie; Yuan, Li; Yurkewicz, Adam; Yusuff, Imran; Zabinski, Bartlomiej; Zaidan, Remi; Zaitsev, Alexander; Zaman, Aungshuman; Zambito, Stefano; Zanello, Lucia; Zanzi, Daniele; Zeitnitz, Christian; Zeman, Martin; Zemla, Andrzej; Zengel, Keith; Zenin, Oleg; Ženiš, Tibor; Zerwas, Dirk; Zevi della Porta, Giovanni; Zhang, Dongliang; Zhang, Fangzhou; Zhang, Huaqiao; Zhang, Jinlong; Zhang, Lei; Zhang, Xueyao; Zhang, Zhiqing; Zhao, Zhengguo; Zhemchugov, Alexey; Zhong, Jiahang; Zhou, Bing; Zhou, Lei; Zhou, Ning; Zhu, Cheng Guang; Zhu, Hongbo; Zhu, Junjie; Zhu, Yingchun; Zhuang, Xuai; Zhukov, Konstantin; Zibell, Andre; Zieminska, Daria; Zimine, Nikolai; Zimmermann, Christoph; Zimmermann, Robert; Zimmermann, Simone; Zimmermann, Stephanie; Zinonos, Zinonas; Ziolkowski, Michael; Zobernig, Georg; Zoccoli, Antonio; zur Nedden, Martin; Zurzolo, Giovanni; Zutshi, Vishnu; Zwalinski, Lukasz

    2015-01-01

    This Letter presents a search for a hidden-beauty counterpart of the $X(3872)$ in the mass ranges 10.05--10.31 GeV and 10.40--11.00 GeV, in the channel $X_b \\to \\pi^{+} \\pi^{-} \\Upsilon(1 \\rm S)(\\rightarrow\\mu^+\\mu^-)$, using 16.2 fb$^{-1}$ of $\\sqrt{s}=8$ TeV $pp$ collision data collected by the ATLAS detector at the LHC. No evidence for new narrow states is found, and upper limits are set on the product of the $X_b$ cross section and branching fraction, relative to those of the $\\Upsilon(2 \\rm S)$, at the 95% confidence level using the CL$_S$ approach. These limits range from 0.8% to 4.0%, depending on mass. For masses above 10.1 GeV, the expected upper limits from this analysis are the most restrictive to date. Searches for production of the $\\Upsilon(1^3 \\rm{D}$$_J)$, $\\Upsilon(10860)$, and $\\Upsilon(11020)$ states also reveal no significant signals.

  7. Repetitive maladaptive behavior: beyond repetition compulsion.

    Science.gov (United States)

    Bowins, Brad

    2010-09-01

    Maladaptive behavior that repeats, typically known as repetition compulsion, is one of the primary reasons that people seek psychotherapy. However, even with psychotherapeutic advances it continues to be extremely difficult to treat. Despite wishes and efforts to the contrary repetition compulsion does not actually achieve mastery, as evidenced by the problem rarely resolving without therapeutic intervention, and the difficulty involved in producing treatment gains. A new framework is proposed, whereby such behavior is divided into behavior of non-traumatic origin and traumatic origin with some overlap occurring. Repetitive maladaptive behavior of non-traumatic origin arises from an evolutionary-based process whereby patterns of behavior frequently displayed by caregivers and compatible with a child's temperament are acquired and repeated. It has a familiarity and ego-syntonic aspect that strongly motivates the person to retain the behavior. Repetitive maladaptive behavior of traumatic origin is characterized by defensive dissociation of the cognitive and emotional components of trauma, making it very difficult for the person to integrate the experience. The strong resistance of repetitive maladaptive behavior to change is based on the influence of both types on personality, and also factors specific to each. Psychotherapy, although very challenging at the best of times, can achieve the mastery wished and strived for, with the aid of several suggestions provided.

  8. Precision markedly attenuates repetitive lift capacity.

    Science.gov (United States)

    Collier, Brooke R; Holland, Laura; McGhee, Deirdre; Sampson, John A; Bell, Alison; Stapley, Paul J; Groeller, Herbert

    2014-01-01

    This study investigated the effect of precision on time to task failure in a repetitive whole-body manual handling task. Twelve participants were required to repetitively lift a box weighing 65% of their single repetition maximum to shoulder height using either precise or unconstrained box placement. Muscle activity, forces exerted at the ground, 2D body kinematics, box acceleration and psychophysical measures of performance were recorded until task failure was reached. With precision, time to task failure for repetitive lifting was reduced by 72%, whereas the duration taken to complete a single lift and anterior deltoid muscle activation increased by 39% and 25%, respectively. Yet, no significant difference was observed in ratings of perceived exertion or heart rate at task failure. In conclusion, our results suggest that when accuracy is a characteristic of a repetitive manual handling task, physical work capacity will decline markedly. The capacity to lift repetitively to shoulder height was reduced by 72% when increased accuracy was required to place a box upon a shelf. Lifting strategy and muscle activity were also modified, confirming practitioners should take into consideration movement precision when evaluating the demands of repetitive manual handling tasks.

  9. Grammatical Change through Repetition.

    Science.gov (United States)

    Arevart, Supot

    1989-01-01

    The effect of repetition on grammatical change in an unrehearsed talk is examined based on a case study of a single learner. It was found that repetition allows for accuracy monitoring in that errors committed in repeated contexts undergo correction. Implications for teaching are discussed. (23 references) (LB)

  10. The Negative Repetition Effect

    Science.gov (United States)

    Mulligan, Neil W.; Peterson, Daniel J.

    2013-01-01

    A fundamental property of human memory is that repetition enhances memory. Peterson and Mulligan (2012) recently documented a surprising "negative repetition effect," in which participants who studied a list of cue-target pairs twice recalled fewer targets than a group who studied the pairs only once. Words within a pair rhymed, and…

  11. Roles of repetitive sequences

    Energy Technology Data Exchange (ETDEWEB)

    Bell, G.I.

    1991-12-31

    The DNA of higher eukaryotes contains many repetitive sequences. The study of repetitive sequences is important, not only because many have important biological function, but also because they provide information on genome organization, evolution and dynamics. In this paper, I will first discuss some generic effects that repetitive sequences will have upon genome dynamics and evolution. In particular, it will be shown that repetitive sequences foster recombination among, and turnover of, the elements of a genome. I will then consider some examples of repetitive sequences, notably minisatellite sequences and telomere sequences as examples of tandem repeats, without and with respectively known function, and Alu sequences as an example of interspersed repeats. Some other examples will also be considered in less detail.

  12. Roles of repetitive sequences

    Energy Technology Data Exchange (ETDEWEB)

    Bell, G.I.

    1991-12-31

    The DNA of higher eukaryotes contains many repetitive sequences. The study of repetitive sequences is important, not only because many have important biological function, but also because they provide information on genome organization, evolution and dynamics. In this paper, I will first discuss some generic effects that repetitive sequences will have upon genome dynamics and evolution. In particular, it will be shown that repetitive sequences foster recombination among, and turnover of, the elements of a genome. I will then consider some examples of repetitive sequences, notably minisatellite sequences and telomere sequences as examples of tandem repeats, without and with respectively known function, and Alu sequences as an example of interspersed repeats. Some other examples will also be considered in less detail.

  13. Repetition and Translation Shifts

    Directory of Open Access Journals (Sweden)

    Simon Zupan

    2006-06-01

    Full Text Available Repetition manifests itself in different ways and at different levels of the text. The first basic type of repetition involves complete recurrences; in which a particular textual feature repeats in its entirety. The second type involves partial recurrences; in which the second repetition of the same textual feature includes certain modifications to the first occurrence. In the article; repetitive patterns in Edgar Allan Poe’s short story “The Fall of the House of Usher” and its Slovene translation; “Konec Usherjeve hiše”; are compared. The author examines different kinds of repetitive patterns. Repetitions are compared at both the micro- and macrostructural levels. As detailed analyses have shown; considerable microstructural translation shifts occur in certain types of repetitive patterns. Since these are not only occasional; sporadic phenomena; but are of a relatively high frequency; they reduce the translated text’s potential for achieving some of the gothic effects. The macrostructural textual property particularly affected by these shifts is the narrator’s experience as described by the narrative; which suffers a reduction in intensity.

  14. Trialogue: Preparation, Repetition and...

    Science.gov (United States)

    Oberg, Antoinette; And Others

    1996-01-01

    This paper interrogates both curriculum theory and the limits and potentials of textual forms. A set of overlapping discourses (a trialogue) focuses on inquiring into the roles of obsession and repetition in creating deeply interpretive locations for understanding. (SM)

  15. Maximum Fidelity

    CERN Document Server

    Kinkhabwala, Ali

    2013-01-01

    The most fundamental problem in statistics is the inference of an unknown probability distribution from a finite number of samples. For a specific observed data set, answers to the following questions would be desirable: (1) Estimation: Which candidate distribution provides the best fit to the observed data?, (2) Goodness-of-fit: How concordant is this distribution with the observed data?, and (3) Uncertainty: How concordant are other candidate distributions with the observed data? A simple unified approach for univariate data that addresses these traditionally distinct statistical notions is presented called "maximum fidelity". Maximum fidelity is a strict frequentist approach that is fundamentally based on model concordance with the observed data. The fidelity statistic is a general information measure based on the coordinate-independent cumulative distribution and critical yet previously neglected symmetry considerations. An approximation for the null distribution of the fidelity allows its direct conversi...

  16. Novel porcine repetitive elements

    Directory of Open Access Journals (Sweden)

    Nonneman Dan J

    2006-12-01

    Full Text Available Abstract Background Repetitive elements comprise ~45% of mammalian genomes and are increasingly known to impact genomic function by contributing to the genomic architecture, by direct regulation of gene expression and by affecting genomic size, diversity and evolution. The ubiquity and increasingly understood importance of repetitive elements contribute to the need to identify and annotate them. We set out to identify previously uncharacterized repetitive DNA in the porcine genome. Once found, we characterized the prevalence of these repeats in other mammals. Results We discovered 27 repetitive elements in 220 BACs covering 1% of the porcine genome (Comparative Vertebrate Sequencing Initiative; CVSI. These repeats varied in length from 55 to 1059 nucleotides. To estimate copy numbers, we went to an independent source of data, the BAC-end sequences (Wellcome Trust Sanger Institute, covering approximately 15% of the porcine genome. Copy numbers in BAC-ends were less than one hundred for 6 repeat elements, between 100 and 1000 for 16 and between 1,000 and 10,000 for 5. Several of the repeat elements were found in the bovine genome and we have identified two with orthologous sites, indicating that these elements were present in their common ancestor. None of the repeat elements were found in primate, rodent or dog genomes. We were unable to identify any of the replication machinery common to active transposable elements in these newly identified repeats. Conclusion The presence of both orthologous and non-orthologous sites indicates that some sites existed prior to speciation and some were generated later. The identification of low to moderate copy number repetitive DNA that is specific to artiodactyls will be critical in the assembly of livestock genomes and studies of comparative genomics.

  17. MIMICRY, DIFFERENCE AND REPETITION

    Directory of Open Access Journals (Sweden)

    Marcelo Mendes de Souza

    2008-07-01

    Full Text Available This article addresses Homi K. Bhabha’s concept of mimicry in a broader context, other than that of cultural studies and post-colonial studies, bringing together other concepts, such as that of Gilles Deleuze in Difference and repetition, among other texts, and other names, such as Silviano Santiago, Jorge Luís Borges, Franz Kafka and Giorgio Agamben. As a partial conclusion, the article intends to oppose Bhabha’s freudian-marxist view to Five propositions on Psychoanalysis (1973, Gilles Deleuze’s text about Psychoanalysis published right after his book The Anti-Oedipus.

  18. Adaptation of perceptual responses to low load blood flow restriction training

    DEFF Research Database (Denmark)

    Martín-Hernández, Juan; Ruiz-Aguado, Jorge; Herrero, Juan Azael;

    2016-01-01

    sets (30+15+15+15, respectively) of unilateral leg extension at an intensity of 20% one repetition maximum (1RM) while a restrictive cuff was applied to the most proximal part of the leg. HIT group performed 3 sets of eight repetitions with 85%1RM. RPE and pain were assessed following every exercise...

  19. Maximum Performance Tests in Children with Developmental Spastic Dysarthria.

    Science.gov (United States)

    Wit, J.; And Others

    1993-01-01

    Three Maximum Performance Tasks (Maximum Sound Prolongation, Fundamental Frequency Range, and Maximum Repetition Rate) were administered to 11 children (ages 6-11) with spastic dysarthria resulting from cerebral palsy and 11 controls. Despite intrasubject and intersubject variability in normal and pathological speakers, the tasks were found to be…

  20. Repetition in Waiting for Godot

    Institute of Scientific and Technical Information of China (English)

    李想; 魏妍

    2015-01-01

    Waiting for Godot is one of the most famous plays written by Samuel Barclay Beckett, and also is the founding work of“Theatre of the Absurd”. In the drama, repetitive phenomena shed light on the whole construction considerably. All the charac-ters were helpless and unthinking. Their dialogues were simple, nonsense and repetitive. Two scenes were cyclical. Repetition was used subtly in order to express the theme of the play, showing mental crisis after depravation of WWII.

  1. Understanding maximal repetitions in strings

    CERN Document Server

    Crochemore, Maxime

    2008-01-01

    The cornerstone of any algorithm computing all repetitions in a string of length n in O(n) time is the fact that the number of runs (or maximal repetitions) is O(n). We give a simple proof of this result. As a consequence of our approach, the stronger result concerning the linearity of the sum of exponents of all runs follows easily.

  2. Perceptual Repetition Blindness Effects

    Science.gov (United States)

    Hochhaus, Larry; Johnston, James C.; Null, Cynthia H. (Technical Monitor)

    1994-01-01

    The phenomenon of repetition blindness (RB) may reveal a new limitation on human perceptual processing. Recently, however, researchers have attributed RB to post-perceptual processes such as memory retrieval and/or reporting biases. The standard rapid serial visual presentation (RSVP) paradigm used in most RB studies is, indeed, open to such objections. Here we investigate RB using a "single-frame" paradigm introduced by Johnston and Hale (1984) in which memory demands are minimal. Subjects made only a single judgement about whether one masked target word was the same or different than a post-target probe. Confidence ratings permitted use of signal detection methods to assess sensitivity and bias effects. In the critical condition for RB a precue of the post-target word was provided prior to the target stimulus (identity precue), so that the required judgement amounted to whether the target did or did not repeat the precue word. In control treatments, the precue was either an unrelated word or a dummy.

  3. Randomization of Symbol Repetition of Punch Cards with Superimposed Coding in Information-Search Systems.

    Science.gov (United States)

    Pirovich, L. Ya

    The article shows the effect of the irregularity of using separate symbols on search noise on punch cards with superimposed symbol coding in information-search system (IPS). A binomial law of random value distribution of repetition of each symbol is established and analyzed. A method of determining the maximum value of symbol repetition is…

  4. THE RELATIONSHIP BETWEEN MAXIMUM UNILATERAL SQUAT STRENGTH AND BALANCE IN YOUNG ADULT MEN AND WOMEN

    Directory of Open Access Journals (Sweden)

    Kevin McCurdy

    2006-06-01

    Full Text Available The purpose of this study was to determine the relationship between unilateral squat strength and measures of static balance to compare balance performance between the dominant and non-dominant leg. Seventeen apparently healthy men (mean mass 90.5 ± 20.9 kg and age 21.7 ± 1.8 yrs and 25 women (mean mass 62.2 ± 14.5 kg and age 21.9 ± 1.3 yrs completed the study. Weight bearing unilateral strength was measured with a 1RM modified unilateral squat on the dominant and non-dominant leg. The students completed the stork stand and wobble board tests to determine static balance on the dominant and non-dominant leg. Maximum time maintained in the stork stand position, on the ball of the foot with the uninvolved foot against the involved knee with hands on the hips, was recorded. Balance was measured with a 15 second wobble board test. No significant correlations were found between the measurements of unilateral balance and strength (r values ranged between -0.05 to 0.2 for the men and women. Time off balance was not significantly different between the subjects' dominant (men 1.1 ± 0.4 s; women 0.3 ± 0.1 s and non-dominant (men 0.9 ± 0.3 s; women 0.3 ± 0.1 s leg for the wobble board. Similar results were found for the time balanced during the stork stand test on the dominant (men 26.4 ± 6.3 s; women 24.1 ± 5.6 s and non-dominant (men 26.0 ± 5.7 s; women 21.3 ± 4.1 s leg. The data indicate that static balance and strength is unrelated in young adult men and women and gains made in one variable after training may not be associated with a change in performance of the other variable. These results also suggest that differences in static balance performance between legs can not be determined by leg dominance. Similar research is needed to compare contralateral leg balance in populations who participate in work or sport activities requiring repetitive asymmetrical use. A better understanding of contralateral balance performance will help

  5. Repetition in English Political Public Speaking

    Institute of Scientific and Technical Information of China (English)

    李红梅

    2010-01-01

    Repetition is frequently used in English political public speaking to make it easy to be remembered and powerful to move the feelings of the public. This paper is intended to analyze the functions of repetition and different levels of repetition to highlight the significance of repetition in English political public speaking and the ability of using it in practice.

  6. Varianish: Jamming with Pattern Repetition

    Directory of Open Access Journals (Sweden)

    Jort Band

    2014-10-01

    Full Text Available In music, patterns and pattern repetition are often regarded as a machine-like task, indeed often delegated to drum Machines and sequencers. Nevertheless, human players add subtle differences and variations to repeated patterns that are musically interesting and often unique. Especially when looking at minimal music, pattern repetitions create hypnotic effects and the human mind blends out the actual pattern to focus on variation and tiny differences over time. Varianish is a musical instrument that aims at turning this phenomenon into a new musical experience for musician and audience: Musical pattern repetitions are found in live music and Varianish generates additional (musical output accordingly that adds substantially to the overall musical expression. Apart from the theory behind the pattern finding and matching and the conceptual design, a demonstrator implementation of Varianish is presented and evaluated.

  7. Optimal Velocity to Achieve Maximum Power Output – Bench Press for Trained Footballers

    Directory of Open Access Journals (Sweden)

    Richard Billich

    2015-03-01

    Full Text Available Optimal Velocity to Achieve Maximum Power Output – Bench Press for Trained Footballers In today’s world of strength training there are many myths surrounding effective exercising with the least possible negative effect on one’s health. In this experiment we focus on the finding of a relationship between maximum output, used load and the velocity with which the exercise is performed. The main objective is to find the optimal speed of the exercise motion which would allow us to reach the maximum mechanic muscle output during a bench press exercise. This information could be beneficial to sporting coaches and recreational sportsmen alike in helping them improve the effectiveness of fast strength training. Fifteen football players of the FK Třinec football club participated in the experiment. The measurements were made with the use of 3D cinematic and dynamic analysis, both experimental methods. The research subjects participated in a strength test, in which the mechanic muscle output of 0, 10, 30, 50, 70, 90% and one repetition maximum (1RM was measured. The acquired result values and other required data were modified using Qualisys Track Manager and Visual 3D software (C-motion, Rockville, MD, USA. During the bench press exercise the maximum mechanic muscle output of the set of research subjects was reached at 75% of maximum exercise motion velocity. Optimální rychlost pohybu pro dosažení maxima výstupního výkonu – bench press u trénovaných fotbalistů Dnešní svět silového tréninku přináší řadu mýtů o tom, jak cvičit efektivně a zároveň s co nejmenším negativním vlivem na zdraví člověka. V tomto experimentu se zabýváme nalezením vztahu mezi maximálním výkonem, použitou zátěží a rychlostí. Hlavním úkolem je nalezení optimální rychlosti pohybu pro dosažení maximálního mechanického svalového výkonu při cvičení bench press, což pomůže nejenom trenérům, ale i rekreačním sportovc

  8. Maximum permissible voltage of YBCO coated conductors

    Energy Technology Data Exchange (ETDEWEB)

    Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z. [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Hong, Z., E-mail: zhiyong.hong@sjtu.edu.cn [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Wang, D.; Zhou, H.; Shen, X.; Shen, C. [Qingpu Power Supply Company, State Grid Shanghai Municipal Electric Power Company, Shanghai (China)

    2014-06-15

    Highlights: • We examine three kinds of tapes’ maximum permissible voltage. • We examine the relationship between quenching duration and maximum permissible voltage. • Continuous I{sub c} degradations under repetitive quenching where tapes reaching maximum permissible voltage. • The relationship between maximum permissible voltage and resistance, temperature. - Abstract: Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (I{sub c}) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the I{sub c} degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.

  9. REPETITIVE CLUSTER-TILTED ALGEBRAS

    Institute of Scientific and Technical Information of China (English)

    Zhang Shunhua; Zhang Yuehui

    2012-01-01

    Let H be a finite-dimensional hereditary algebra over an algebraically closed field k and CFm be the repetitive cluster category of H with m ≥ 1.We investigate the properties of cluster tilting objects in CFm and the structure of repetitive clustertilted algebras.Moreover,we generalize Theorem 4.2 in [12](Buan A,Marsh R,Reiten I.Cluster-tilted algebra,Trans.Amer.Math.Soc.,359(1)(2007),323-332.) to the situation of CFm,and prove that the tilting graph KCFm of CFm is connected.

  10. Movement Velocity as Indicator of Relative Intensity and Level of Effort Attained During the Set in Pull-Up Exercise.

    Science.gov (United States)

    Sánchez-Moreno, Miguel; Rodríguez-Rosell, David; Pareja-Blanco, Fernando; Mora-Custodio, Ricardo; González-Badillo, Juan José

    2017-03-24

    to analyze the relationship between movement velocity and relative load (%1RM) in the pull-up exercise (PU), and to determine the pattern of repetition velocity loss during a single set to failure in pulling one's own body mass. Fifty-two men (age = 26.5 ± 3.9 years, body mass = 74.3 ± 7.2 kg) performed a first evaluation (T1) consisting of an one-repetition maximum test (1RM), and a test of maximum number of repetitions to failure pulling one's own body mass (MNR) in the PU exercise. Thirty-nine subjects performed both tests on a second occasion (T2) following 12 weeks' training. We observed a strong relationship between mean propulsive velocity (MPV) and %1RM (r = -.96). Mean velocity attained with 1RM load (V1RM) was 0.20 ± 0.05 m·s(-1) and it influenced the MPV attained with each %1RM. Although 1RM increased by 3.4% from T1 to T2, the relationship between MPV and %1RM, and V1RM remained stable. We also confirmed stability in the V1RM regardless of individual relative strength. We found a strong relationship between percentage of velocity loss and percentage of performed repetitions (R(2) = .88), which remained stable despite a 15% increase in MNR. Monitoring repetition velocity allows estimation of the %1RM used as soon as the first repetition with a given load is performed, and the number of repetitions remaining in reserve when a given percentage of velocity loss is achieved during a PU exercise set.

  11. Repetitive elements in parasitic protozoa

    Directory of Open Access Journals (Sweden)

    Clayton Christine

    2010-05-01

    Full Text Available Abstract A recent paper published in BMC Genomics suggests that retrotransposition may be active in the human gut parasite Entamoeba histolytica. This adds to our knowledge of the various types of repetitive elements in parasitic protists and the potential influence of such elements on pathogenicity. See research article http://www.biomedcentral.com/1471-2164/11/321

  12. PREDIÇÃO DE FORÇA MÁXIMA E NÚMERO DE REPETIÇÕES NO EXERCÍCIO SUPINO DURANTE INTENSIDADES PARA HIPERTROFIA E ENDURANCE MUSCULAR

    National Research Council Canada - National Science Library

    Frederico D’elia Rieder; Otávio Rodrigo Palacio Favaro

    2014-01-01

    Objective: To analyze the number of maximum repetitions performed in the bench press exercise at intensities related to hypertrophy training and muscular endurance through prediction equation for 1-RM...

  13. Maximum Autocorrelation Factorial Kriging

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.

    2000-01-01

    This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from...

  14. Repetition suppression and repetition priming are processing outcomes.

    Science.gov (United States)

    Wig, Gagan S

    2012-01-01

    Abstract There is considerable evidence that repetition suppression (RS) is a cortical signature of previous exposure to the environment. In many instances RS in specific brain regions is accompanied by improvements in specific behavioral measures; both observations are outcomes of repeated processing. In understanding the mechanism by which brain changes give rise to behavioral changes, it is important to consider what aspect of the environment a given brain area or set of areas processes, and how this might be expressed behaviorally.

  15. Cohesive Function of Lexical Repetition in Text

    Institute of Scientific and Technical Information of China (English)

    张莉; 卢沛沛

    2013-01-01

    Lexical repetition is the most direct form of lexical cohesion,which is the central device for making texts hang together. Although repetition is the most direct way to emphasize,it performs the cohesive effect more apparently.

  16. A repetitive 0.14 THz relativistic surface wave oscillator

    Energy Technology Data Exchange (ETDEWEB)

    Wang Guangqiang; Tong Changjiang; Li Xiaoze; Wang Xuefeng; Li Shuang; Lu Xicheng [Northwest Institute of Nuclear Technology, P.O. Box 69-1, Xi' an 710024 (China); Wang Jianguo [Northwest Institute of Nuclear Technology, P.O. Box 69-1, Xi' an 710024 (China); School of Electronic and Information Engineering, Xi' an Jiaotong University, Xi' an 710049 (China)

    2013-04-15

    Preliminary experimental results of a repetitive 0.14 THz overmoded relativistic surface wave oscillator (RSWO) are presented in this paper. The repetitive RSWO is developed by using a rectangularly corrugated slow-wave structure with overmoded ratio of 3 and a foilless diode emitting annular electron beam with thickness of 0.5 mm. The high quality electron beams at the repetition rate of 10 are obtained over a wide range of diode voltage (180 kV < U < 240 kV) and current (700 A < I < 1.2 kA). The generation experiments of RSWO are conducted at an axial pulsed magnetic field whose maximum strength and duration can reach about 2.7 T and 1 s, respectively. The experimental results show that the RSWO successfully produces reasonable uniform terahertz pulses at repetition rate of 10, and the pulse duration, frequency, and power of a single pulse are about 1.5 ns, 0.154 THz, and 2.6 MW, respectively, whereas the dominated radiation mode of the RSWO is TM{sub 02}.

  17. High repetition rate femtosecond dye amplifier using a laser diode pumped neodymium:YAG laser

    Energy Technology Data Exchange (ETDEWEB)

    Zysset, B.; LaGasse, M.J.; Fujimoto, J.G.; Kafka, J.D.

    1989-02-06

    A high repetition rate femtosecond dye amplifier is demonstrated using a laser diode pumped Q-switched Nd:YAG laser. Amplification of wavelength tunable 300 fs pulses from a synchronously mode-locked rhodamine dye laser is achieved with a saturated gain of 70 and a small gain of 200 at a repetition rate of 800 Hz. Maximum pulse energies of 40 nJ are obtained, and pulse compression to as short as 30 fs is demonstrated.

  18. High repetition rate femtosecond dye amplifier using a laser diode pumped neodymium:YAG laser

    Science.gov (United States)

    Zysset, B.; LaGasse, M. J.; Fujimoto, J. G.; Kafka, J. D.

    1989-02-01

    A high repetition rate femtosecond dye amplifier is demonstrated using a laser diode pumped Q-switched Nd:YAG laser. Amplification of wavelength tunable 300 fs pulses from a synchronously mode-locked rhodamine dye laser is achieved with a saturated gain of 70 and a small gain of 200 at a repetition rate of 800 Hz. Maximum pulse energies of 40 nJ are obtained, and pulse compression to as short as 30 fs is demonstrated.

  19. Circuit considerations for repetitive railguns

    Energy Technology Data Exchange (ETDEWEB)

    Honih, E.M.

    1986-01-01

    Railgun electromagnetic launchers have significant military and scientific potential. They provide direct conversion of electrical energy to projectile kinetic energy, and they offer the hope of achieving projectile velocities greatly exceeding the limits of conventional guns. With over 10 km/sec already demonstrated, railguns are attracting attention for tactical and strategic weapons systems and for scientific equation-of-state research. The full utilization of railguns will require significant improvements in every aspect of system design - projectile, barrel, and power source - to achieve operation on a large scale. This paper will review fundamental aspects of railguns, with emphasis on circuit considerations and repetitive operation.

  20. Maximum Autocorrelation Factorial Kriging

    OpenAIRE

    Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.; Steenfelt, Agnete

    2000-01-01

    This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from an ordinary non-spatial factor analysis, and they are interpreted in a geological context. It is demonstrated that MAF analysis contrary to ordinary non-spatial factor analysis gives an objective discrimina...

  1. Electromyographical and Perceptual Responses to Different Resistance Intensities in a Squat Protocol: Does Performing Sets to Failure With Light Loads Produce the Same Activity?

    Science.gov (United States)

    Looney, David P; Kraemer, William J; Joseph, Michael F; Comstock, Brett A; Denegar, Craig R; Flanagan, Shawn D; Newton, Robert U; Szivak, Tunde K; DuPont, William H; Hooper, David R; Häkkinen, Keijo; Maresh, Carl M

    2016-03-01

    This investigation examined peak motor unit activity during sets that differed in resistance (50, 70, or 90% 1 repetition maximum [1RM]). Ten resistance-trained men (age, 23 ± 3 years; height, 187 ± 7 cm; body mass, 91.5 ± 6.9 kg; squat 1RM, 141 ± 28 kg) were assessed by electromyography (EMG) on the vastus lateralis and vastus medialis muscles in a randomized within-subject experiment consisting of 2 test visits: a drop-set day and a single-set day using only the 50% of 1RM intensity performed to failure. At the start of each day, subjects performed 2 submaximal repetition sets (50% 1RM × 10 repetitions and 70% 1RM × 7 repetitions). On the drop-set day, subjects performed 3 consecutive maximal repetition sets at 90%, 70%, and 50% 1RM to failure with no rest periods in between. On the single-set day, subjects performed a maximal repetition set at 50% 1RM to failure. Overall, the maximal repetition sets to failure at 50% and 70% 1RM resulted in higher peak EMG amplitude than during submaximal repetition sets with the same resistance. However, peak EMG amplitude was significantly (p ≤ 0.05) greater in the maximal 90% 1RM set than all other sets performed. When sets were performed to failure, ratings of perceived exertion (CR-10) did not differ over the intensity range of loads and suggests that perception is not capable of accurately detecting the actual amount of motor unit activation. The results of this investigation indicate that using higher external resistance is a more effective means of increasing motor unit activity than increasing the number of repetitions performed with lighter weights even when the end point is muscular failure. Accordingly, previous recommendations for the use of heavier loads during resistance training programs to stimulate the maximal development of strength and hypertrophy are further supported.

  2. Digital repetitive control under varying frequency conditions

    OpenAIRE

    Ramos Fuentes, Germán Andrés

    2012-01-01

    The tracking/rejection of periodic signals constitutes a wide field of research in the control theory and applications area and Repetitive Control has proven to be an efficient way to face this topic; however, in some applications the period of the signal to be tracked/rejected changes in time or is uncertain, which causes and important performance degradation in the standard repetitive controller. This thesis presents some contributions to the open topic of repetitive control workin...

  3. [Repetition and fear of dying].

    Science.gov (United States)

    Lerner, B D

    1995-03-01

    In this paper a revision is made of the qualifications of Repetition (R) in Freuds work, i.e. its being at the service of the Pleasure Principle and, beyond it, the binding of free energy due to trauma. Freud intends to explain with this last concept the "fort-da" and the traumatic dreams (obsessively reiterated self-reproaches may be added to them). The main thesis of this work is that R. is not only a defense against the recollection of the ominous past (as in the metaphorical deaths of abandonment and desertion) but also a way of maintaining life and identify fighting against the inescapable omninous future (known but yet experienced), i.e. our own death. Some forms of R. like habits, identificatory behaviors and sometimes even magic, are geared to serve the life instinct. A literary illustration shows this desperate fight.

  4. Pressure rig for repetitive casting

    Science.gov (United States)

    Vasquez, Peter (Inventor); Hutto, William R. (Inventor); Philips, Albert R. (Inventor)

    1989-01-01

    The invention is a pressure rig for repetitive casting of metal. The pressure rig performs like a piston for feeding molten metal into a mold. Pressure is applied to an expandable rubber diaphragm which expands like a balloon to force the metal into the mold. A ceramic cavity which holds molten metal is lined with blanket-type insulating material, necessitating only a relining for subsequent use and eliminating the lengthy cavity preparation inherent in previous rigs. In addition, the expandable rubber diaphragm is protected by the insulating material thereby decreasing its vulnerability to heat damage. As a result of the improved design the life expectancy of the pressure rig contemplated by the present invention is more than doubled. Moreover, the improved heat protection has allowed the casting of brass and other alloys with higher melting temperatures than possible in the conventional pressure rigs.

  5. Maximum likely scale estimation

    DEFF Research Database (Denmark)

    Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo

    2005-01-01

    A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and/or ...

  6. Comparing repetition-based melody segmentation models

    NARCIS (Netherlands)

    Rodríguez López, M.E.; de Haas, Bas; Volk, Anja

    2014-01-01

    This paper reports on a comparative study of computational melody segmentation models based on repetition detection. For the comparison we implemented five repetition-based segmentation models, and subsequently evaluated their capacity to automatically find melodic phrase boundaries in a corpus of 2

  7. Task Repetition and Second Language Speech Processing

    Science.gov (United States)

    Lambert, Craig; Kormos, Judit; Minn, Danny

    2017-01-01

    This study examines the relationship between the repetition of oral monologue tasks and immediate gains in L2 fluency. It considers the effect of aural-oral task repetition on speech rate, frequency of clause-final and midclause filled pauses, and overt self-repairs across different task types and proficiency levels and relates these findings to…

  8. Repetitions: A Cross-Cultural Study.

    Science.gov (United States)

    Murata, Kumiko

    1995-01-01

    This study investigated how repetition is used in conversation among native speakers of British English, native speakers of Japanese, and Japanese speakers of English. Five interactional functions of repetition (interruption-orientated, solidarity, silence-avoidance, hesitation, and reformulation) were identified, as well as the cultural factors…

  9. Garnet composite films with Au particles fabricated by repetitive formation for enhancement of Faraday effect

    Energy Technology Data Exchange (ETDEWEB)

    Uchida, H; Nakai, Y [Department of Electronics and Intelligent Systems, Tohoku Institute of Technology, 35-1 Yagiyama-Kasumi, Taihaku, Sendai, Miyagi 982-8577 (Japan); Mizutani, Y; Inoue, M [Department of Electrical and Electronic Information Engineering, Toyohashi University of Technology, Tempaku, Toyohashi, Aichi 441-8580 (Japan); Fedyanin, A A, E-mail: uchida_hn@tohtech.ac.jp [Faculty of Physics, Moscow State University, Moscow 119992 (Russian Federation)

    2011-02-16

    To prepare garnet (Bi : YIG) composite films with Au particles, we used a repetitive formation method to increase the number density of particles. On increasing the number of repetitions, the diameter distribution of the particles changed. After five repetitions using 5 nm Au films, the diameter distribution separated into two size groups. Shift of wavelength-excited localized surface plasmon resonance is discussed relative to the diameter distribution. In the composite films, enhancement of Faraday rotation associated with surface plasmons was observed. With six repetitions, a maximum enhanced rotation of -1.2{sup 0} was obtained, which is 20 times larger than that of a single Bi : YIG film. The figures of merit for the composite films are discussed. The thickness of a Bi : YIG composite film working for enhanced Faraday rotation was examined using an ion milling method.

  10. Digital repetitive control under varying frequency conditions

    CERN Document Server

    Ramos, Germán A; Olm, Josep M

    2013-01-01

    The tracking/rejection of periodic signals constitutes a wide field of research in the control theory and applications area. Repetitive Control has proven to be an efficient way to face this topic. However, in some applications the frequency of the reference/disturbance signal is time-varying or uncertain. This causes an important performance degradation in the standard Repetitive Control scheme. This book presents some solutions to apply Repetitive Control in varying frequency conditions without loosing steady-state performance. It also includes a complete theoretical development and experimental results in two representative systems. The presented solutions are organized in two complementary branches: varying sampling period Repetitive Control and High Order Repetitive Control. The first approach allows dealing with large range frequency variations while the second allows dealing with small range frequency variations. The book also presents applications of the described techniques to a Roto-magnet plant and...

  11. Kinematic and sEMG Analysis of the Back Squat at Different Intensities With and Without Knee Wraps.

    Science.gov (United States)

    Gomes, Willy A; Brown, Lee E; Soares, Enrico G; da Silva, Josinaldo J; de O Silva, Fernando H D; Serpa, Érica P; Corrêa, Daniel A; Vilela Junior, Guanis de B; Lopes, Charles R; Marchetti, Paulo H

    2015-09-01

    The purposes of this study were to measure the acute effects of knee wraps (KWs) on knee and hip joint kinematics, dynamic muscle activation from the vastus lateralis (VL) and gluteus maximus (GM), and rating of perceived exertion (RPE) during the back squat exercise at 2 different intensities. Fourteen resistance-trained men (age: 24 ± 4 years, height: 176 ± 6 cm, body mass: 81 ± 11 kg, back squat 1 repetition maximum [1RM]: 107 ± 30 kg, 3 ± 1 year of back squat experience) performed 1 set of 3 repetitions under 4 different conditions, to a depth of approximately 90 degrees of knee joint flexion, and in random order: KWs at 60% 1RM (KW60), KWs at 90% 1RM (KW90), without knee wraps (NWs) at 60% 1RM (NW60), and NWs at 90% 1RM (NW90). The dependent variables obtained were vertical and horizontal bar displacement, peak joint angle in the sagittal plane (hip and knee joints), concentric and eccentric muscle activation (by integrated electromyography) from the VL and GM, and RPE. For muscle activity, there were significant decreases in the VL NWs at 60% 1RM (p = 0.013) and a significant increase NWs at 90% 1RM (p = 0.037). There was a significant increase in VL muscle activity at 90% 1RM, when compared with 60% 1RM (KW: p = 0.001, effect size (ES) = 1.51 and NW: p knee flexion NWs for both intensities: 60% 1RM (p < 0.001) and 90% 1RM (p = 0.018). For normalized vertical barbell displacement, there were significant differences between intensities when using KWs (p = 0.022). There were significant differences in RPE between 60 and 90% 1RM for each condition: KWs (p < 0.001) and NWs (p < 0.001). In conclusion, the use of KWs results in decreased muscle activation of the VL at the same intensity (90% 1RM).

  12. Maximum information photoelectron metrology

    CERN Document Server

    Hockett, P; Wollenhaupt, M; Baumert, T

    2015-01-01

    Photoelectron interferograms, manifested in photoelectron angular distributions (PADs), are a high-information, coherent observable. In order to obtain the maximum information from angle-resolved photoionization experiments it is desirable to record the full, 3D, photoelectron momentum distribution. Here we apply tomographic reconstruction techniques to obtain such 3D distributions from multiphoton ionization of potassium atoms, and fully analyse the energy and angular content of the 3D data. The PADs obtained as a function of energy indicate good agreement with previous 2D data and detailed analysis [Hockett et. al., Phys. Rev. Lett. 112, 223001 (2014)] over the main spectral features, but also indicate unexpected symmetry-breaking in certain regions of momentum space, thus revealing additional continuum interferences which cannot otherwise be observed. These observations reflect the presence of additional ionization pathways and, most generally, illustrate the power of maximum information measurements of th...

  13. Strategies for Using Repetition as a Powerful Teaching Tool

    Science.gov (United States)

    Saville, Kirt

    2011-01-01

    Brain research indicates that repetition is of vital importance in the learning process. Repetition is an especially useful tool in the area of music education. The success of repetition can be enhanced by accurate and timely feedback. From "simple repetition" to "repetition with the addition or subtraction of degrees of freedom," there are many…

  14. Strategies for Using Repetition as a Powerful Teaching Tool

    Science.gov (United States)

    Saville, Kirt

    2011-01-01

    Brain research indicates that repetition is of vital importance in the learning process. Repetition is an especially useful tool in the area of music education. The success of repetition can be enhanced by accurate and timely feedback. From "simple repetition" to "repetition with the addition or subtraction of degrees of freedom," there are many…

  15. Repetition priming from moving faces.

    Science.gov (United States)

    Lander, Karen; Bruce, Vicki

    2004-06-01

    Recent experiments have suggested that seeing a familiar face move provides additional dynamic information to the viewer, useful in the recognition of identity. In four experiments, repetition priming was used to investigate whether dynamic information is intrinsic to the underlying face representations. The results suggest that a moving image primes more effectively than a static image, even when the same static image is shown in the prime and the test phases (Experiment 1). Furthermore, when moving images are presented in the test phase (Experiment 2), there is an advantage for moving prime images. The most priming advantage is found with naturally moving faces, rather than with those shown in slow motion (Experiment 3). Finally, showing the same moving sequence at prime and test produced more priming than that found when different moving sequences were shown (Experiment 4). The results suggest that dynamic information is intrinsic to the face representations and that there is an advantage to viewing the same moving sequence at prime and test.

  16. Acute effects of different foam rolling volumes in the interset rest period on maximum repetition performance

    Directory of Open Access Journals (Sweden)

    Estêvão Rios Monteiro, BSc

    2017-06-01

    Conclusion: For the purposes of performance and likely adaptation, interset FR seems to be detrimental to a person's ability to continually produce force, and should not be applied to the agonist muscle group between sets of knee extensions.

  17. Maximum Likelihood Associative Memories

    OpenAIRE

    Gripon, Vincent; Rabbat, Michael

    2013-01-01

    Associative memories are structures that store data in such a way that it can later be retrieved given only a part of its content -- a sort-of error/erasure-resilience property. They are used in applications ranging from caches and memory management in CPUs to database engines. In this work we study associative memories built on the maximum likelihood principle. We derive minimum residual error rates when the data stored comes from a uniform binary source. Second, we determine the minimum amo...

  18. Maximum likely scale estimation

    DEFF Research Database (Denmark)

    Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo

    2005-01-01

    A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and....../or having different derivative orders. Although the principle is applicable to a wide variety of image models, the main focus here is on the Brownian model and its use for scale selection in natural images. Furthermore, in the examples provided, the simplifying assumption is made that the behavior...... of the measurements is completely characterized by all moments up to second order....

  19. Maximum Entropy Fundamentals

    Directory of Open Access Journals (Sweden)

    F. Topsøe

    2001-09-01

    Full Text Available Abstract: In its modern formulation, the Maximum Entropy Principle was promoted by E.T. Jaynes, starting in the mid-fifties. The principle dictates that one should look for a distribution, consistent with available information, which maximizes the entropy. However, this principle focuses only on distributions and it appears advantageous to bring information theoretical thinking more prominently into play by also focusing on the "observer" and on coding. This view was brought forward by the second named author in the late seventies and is the view we will follow-up on here. It leads to the consideration of a certain game, the Code Length Game and, via standard game theoretical thinking, to a principle of Game Theoretical Equilibrium. This principle is more basic than the Maximum Entropy Principle in the sense that the search for one type of optimal strategies in the Code Length Game translates directly into the search for distributions with maximum entropy. In the present paper we offer a self-contained and comprehensive treatment of fundamentals of both principles mentioned, based on a study of the Code Length Game. Though new concepts and results are presented, the reading should be instructional and accessible to a rather wide audience, at least if certain mathematical details are left aside at a rst reading. The most frequently studied instance of entropy maximization pertains to the Mean Energy Model which involves a moment constraint related to a given function, here taken to represent "energy". This type of application is very well known from the literature with hundreds of applications pertaining to several different elds and will also here serve as important illustration of the theory. But our approach reaches further, especially regarding the study of continuity properties of the entropy function, and this leads to new results which allow a discussion of models with so-called entropy loss. These results have tempted us to speculate over

  20. Repetitive Bibliographical Information in Relational Databases.

    Science.gov (United States)

    Brooks, Terrence A.

    1988-01-01

    Proposes a solution to the problem of loading repetitive bibliographic information in a microcomputer-based relational database management system. The alternative design described is based on a representational redundancy design and normalization theory. (12 references) (Author/CLB)

  1. Computer-Related Repetitive Stress Injuries

    Science.gov (United States)

    ... on the shoulder Epicondylitis: elbow soreness often called "tennis elbow" Ganglion cyst: swelling or lump in the wrist ... Bones, Muscles, and Joints Carpal Tunnel Syndrome Medial Epicondylitis Repetitive Stress Injuries Contact Us Print Resources Send ...

  2. Regularized maximum correntropy machine

    KAUST Repository

    Wang, Jim Jing-Yan

    2015-02-12

    In this paper we investigate the usage of regularized correntropy framework for learning of classifiers from noisy labels. The class label predictors learned by minimizing transitional loss functions are sensitive to the noisy and outlying labels of training samples, because the transitional loss functions are equally applied to all the samples. To solve this problem, we propose to learn the class label predictors by maximizing the correntropy between the predicted labels and the true labels of the training samples, under the regularized Maximum Correntropy Criteria (MCC) framework. Moreover, we regularize the predictor parameter to control the complexity of the predictor. The learning problem is formulated by an objective function considering the parameter regularization and MCC simultaneously. By optimizing the objective function alternately, we develop a novel predictor learning algorithm. The experiments on two challenging pattern classification tasks show that it significantly outperforms the machines with transitional loss functions.

  3. Digital repetitive control under varying frequency conditions

    OpenAIRE

    Ramos Fuentes, Germán Andrés

    2012-01-01

    Premi extraordinari doctorat curs 2011-2012, àmbit d’Enginyeria Industrial The tracking/rejection of periodic signals constitutes a wide field of research in the control theory and applications area and Repetitive Control has proven to be an efficient way to face this topic; however, in some applications the period of the signal to be tracked/rejected changes in time or is uncertain, which causes and important performance degradation in the standard repetitive controller. This the...

  4. High-repetition-rate femtosecond dye amplifier using a laser-diode-pumped neodymium:YAG laser

    Energy Technology Data Exchange (ETDEWEB)

    Zysset, B.; LaGasse, M.J.; Fujimoto, J.G.; Kafka, J.D.

    1989-02-06

    A high-repetition-rate femotosecond dye amplifier is demonstrated using a laser-diode-pumped Q-switched Nd:YAG laser. Amplification of wavelength-tunable 300-fs pulses from a synchronously mode-locked rhodamine dye laser is achieved with a saturated gain of 70 and a small gain of 200 at a repetition rate of 800 Hz. Maximum pulse energies of 40 nJ are obtained, and pulse compression to as short as 30 fs is demonstrated.

  5. Equalized near maximum likelihood detector

    OpenAIRE

    2012-01-01

    This paper presents new detector that is used to mitigate intersymbol interference introduced by bandlimited channels. This detector is named equalized near maximum likelihood detector which combines nonlinear equalizer and near maximum likelihood detector. Simulation results show that the performance of equalized near maximum likelihood detector is better than the performance of nonlinear equalizer but worse than near maximum likelihood detector.

  6. Generalized Maximum Entropy

    Science.gov (United States)

    Cheeseman, Peter; Stutz, John

    2005-01-01

    A long standing mystery in using Maximum Entropy (MaxEnt) is how to deal with constraints whose values are uncertain. This situation arises when constraint values are estimated from data, because of finite sample sizes. One approach to this problem, advocated by E.T. Jaynes [1], is to ignore this uncertainty, and treat the empirically observed values as exact. We refer to this as the classic MaxEnt approach. Classic MaxEnt gives point probabilities (subject to the given constraints), rather than probability densities. We develop an alternative approach that assumes that the uncertain constraint values are represented by a probability density {e.g: a Gaussian), and this uncertainty yields a MaxEnt posterior probability density. That is, the classic MaxEnt point probabilities are regarded as a multidimensional function of the given constraint values, and uncertainty on these values is transmitted through the MaxEnt function to give uncertainty over the MaXEnt probabilities. We illustrate this approach by explicitly calculating the generalized MaxEnt density for a simple but common case, then show how this can be extended numerically to the general case. This paper expands the generalized MaxEnt concept introduced in a previous paper [3].

  7. High power, high repetition rate, few picosecond Nd:LuVO₄ oscillator with cavity dumping.

    Science.gov (United States)

    Gao, Peng; Guo, Jie; Li, Jinfeng; Lin, Hua; Yu, Haohai; Zhang, Huaijin; Liang, Xiaoyan

    2015-12-28

    We investigate the potential use of Nd:LuVO4 in high average power, high repetition rate ultrafast lasers. Maximum mode-locked average power of 28 W is obtained at the repetition rate of 58 MHz. The shortest pulse duration is achieved at 4 ps without dispersion compensation. With a cavity dumping technique, the pulse energy is scaling up to 40.7 μJ at 300 kHz and 14.3 μJ at 1.5 MHz.

  8. Automatic Detection of Repetitive Components in 3D Mechanical Engineering Models

    Directory of Open Access Journals (Sweden)

    Laixiang Wen

    2013-01-01

    Full Text Available We present an intelligent method to automatically detect repetitive components in 3D mechanical engineering models. In our work, a new Voxel-based Shape Descriptor (VSD is proposed for effective matching, based on which a similarity function is defined. It uses the voxels intersecting with 3D outline of mechanical components as the feature descriptor. Because each mechanical component may have different poses, the alignment before the matching is needed. For the alignment, we adopt the genetic algorithm to search for optimal solution where the maximum global similarity is the objective. Two components are the same if the maximum global similarity is over a certain threshold. Note that the voxelization of component during feature extraction and the genetic algorithm for searching maximum global similarity are entirely implemented on GPU; the efficiency is improved significantly than with CPU. Experimental results show that our method is more effective and efficient than that existing methods for repetitive components detection.

  9. The Prevalence and Phenomenology of Repetitive Behavior in Genetic Syndromes

    Science.gov (United States)

    Moss, Joanna; Oliver, Chris; Arron, Kate; Burbidge, Cheryl; Berg, Katy

    2009-01-01

    We investigated the prevalence and phenomenology of repetitive behavior in genetic syndromes to detail profiles of behavior. The Repetitive Behaviour Questionnaire (RBQ) provides fine-grained identification of repetitive behaviors. The RBQ was employed to examine repetitive behavior in Angelman (N = 104), Cornelia de Lange (N = 101), Cri-du-Chat…

  10. Likelihood methods and classical burster repetition

    CERN Document Server

    Graziani, C; Graziani, Carlo; Lamb, Donald Q

    1995-01-01

    We develop a likelihood methodology which can be used to search for evidence of burst repetition in the BATSE catalog, and to study the properties of the repetition signal. We use a simplified model of burst repetition in which a number N_{\\rm r} of sources which repeat a fixed number of times N_{\\rm rep} are superposed upon a number N_{\\rm nr} of non-repeating sources. The instrument exposure is explicitly taken into account. By computing the likelihood for the data, we construct a probability distribution in parameter space that may be used to infer the probability that a repetition signal is present, and to estimate the values of the repetition parameters. The likelihood function contains contributions from all the bursts, irrespective of the size of their positional errors --- the more uncertain a burst's position is, the less constraining is its contribution. Thus this approach makes maximal use of the data, and avoids the ambiguities of sample selection associated with data cuts on error circle size. We...

  11. Near- infrared, mode-locked waveguide lasers with multi-GHz repetition rates

    Science.gov (United States)

    Choudhary, A.; Lagatsky, A. A.; Zhang, Z. Y.; Zhou, K. J.; Wang, Q.; Hogg, R. A.; Pradeesh, K.; Rafailov, E. U.; Resan, B.; Oehler, A. E. H.; Weingarten, K. J.; Sibbett, W.; Brown, C. T. A.; Shepherd, D. P.

    2014-02-01

    In this work, we discuss mode-locking results obtained with low-loss, ion-exchanged waveguide lasers. With Yb3+-doped phosphate glass waveguide lasers, a repetition rate of up to 15.2 GHz was achieved at a wavelength of 1047 nm with an average power of 27 mW and pulse duration of 811 fs. The gap between the waveguide and the SESAM introduced negative group velocity dispersion via the Gires Tournois Interferometer (GTI) effect which allowed the soliton mode-locking of the device. A novel quantum dot SESAM was used to mode-lock Er3+, Yb3+-doped phosphate glass waveguide lasers around 1500 nm. Picosecond pulses were achieved at a maximum repetition rate of 6.8 GHz and an average output power of 30 mW. The repetition rate was tuned by more than 1 MHz by varying the pump power.

  12. A vacuum-sealed, gigawatt-class, repetitively pulsed high-power microwave source

    Science.gov (United States)

    Xun, Tao; Fan, Yu-wei; Yang, Han-wu; Zhang, Zi-cheng; Chen, Dong-qun; Zhang, Jian-de

    2017-06-01

    A compact L-band sealed-tube magnetically insulated transmission line oscillator (MILO) has been developed that does not require bulky external vacuum pump for repetitive operations. This device with a ceramic insulated vacuum interface, a carbon fiber array cathode, and non-evaporable getters has a base vacuum pressure in the low 10-6 Pa range. A dynamic 3-D Monte-Carlo model for the molecular flow movement and collision was setup for the MILO chamber. The pulse desorption, gas evolution, and pressure distribution were exactly simulated. In the 5 Hz repetition rate experiments, using a 600 kV diode voltage and 48 kA beam current, the average radiated microwave power for 25 shots is about 3.4 GW in 45 ns pulse duration. The maximum equilibrium pressure is below 4.0 × 10-2 Pa, and no pulse shortening limitations are observed during the repetitive test in the sealed-tube condition.

  13. Rotated balance in humans due to repetitive rotational movement.

    Science.gov (United States)

    Zakynthinaki, M S; Milla, J Madera; De Durana, A López Diaz; Martínez, C A Cordente; Romo, G Rodríguez; Quintana, M Sillero; Molinuevo, J Sampedro

    2010-03-01

    We show how asymmetries in the movement patterns during the process of regaining balance after perturbation from quiet stance can be modeled by a set of coupled vector fields for the derivative with respect to time of the angles between the resultant ground reaction forces and the vertical in the anteroposterior and mediolateral directions. In our model, which is an adaption of the model of Stirling and Zakynthinaki (2004), the critical curve, defining the set of maximum angles one can lean to and still correct to regain balance, can be rotated and skewed so as to model the effects of a repetitive training of a rotational movement pattern. For the purposes of our study a rotation and a skew matrix is applied to the critical curve of the model. We present here a linear stability analysis of the modified model, as well as a fit of the model to experimental data of two characteristic "asymmetric" elite athletes and to a "symmetric" elite athlete for comparison. The new adapted model has many uses not just in sport but also in rehabilitation, as many work place injuries are caused by excessive repetition of unaligned and rotational movement patterns.

  14. Comparing communicative competence in child and chimp: the pragmatics of repetition.

    Science.gov (United States)

    Greenfield, P M; Savage-Rumbaugh, E S

    1993-02-01

    Through an analysis of chimpanzee-human discourse, we show that two Pan troglodytes chimpanzees and two Pan paniscus chimpanzees (bonobos) exposed to a humanly devised symbol system use partial or complete repetition of others' symbols, as children do: they do not produce rote imitations, but instead use repetition to fulfil a variety of pragmatic functions in discourse. These functions include agreement, request, promise, excitement, and selection from alternatives. In so doing, the chimpanzees demonstrate contingent turn-taking and the use of simple devices for lexical cohesion. In short, they demonstrate conversational competence. Because of the presence of this conversational competence in three sibling species, chimpanzees, bonobos, and humans, it is concluded that the potential to express pragmatic functions through repetition was part of the evolutionary history of human language, present in our common ancestor before the phylogenetic divergence of hominids and chimpanzees. In the context of these similarities, two interesting differences appeared: (I) Human children sometimes used repetition to stimulate more talk in their conversational partner; the chimpanzees, in contrast, use repetition exclusively to forward the non-verbal action. This difference may illuminate a unique feature of human linguistic communication, or it may simply reflect a modality difference (visual symbols used by the chimpanzees, speech used by the children) in the symbol systems considered in this research. A second difference seems likely to reflect a true species difference: utterance length. The one- and two-symbol repetitions used by the chimpanzees to fulfil a variety of pragmatic functions were less than half the maximum length found in either the visual symbol combinations addressed to them by their adult human caregivers or the oral repetitions of two-year-old children. This species difference probably reflects the evolution of increased brain size and consequent increased

  15. Effects of inspiratory muscle training upon recovery time during high intensity, repetitive sprint activity.

    Science.gov (United States)

    Romer, L M; McConnell, A K; Jones, D A

    2002-07-01

    The present study examined the influence of specific inspiratory muscle training (IMT) upon recovery time during repetitive sprint activity, as well as the physiological and perceptual responses to fixed intensity shuttle running. Using a double-blind placebo-controlled design, 24 male repetitive sprint athletes were assigned randomly to either an IMT (n = 12) or placebo (n = 12) group. The self-selected recovery time during a repetitive sprint test and the physiological response to submaximal endurance exercise were determined. Following completion of baseline and pre-intervention measures, the IMT group performed 30 inspiratory efforts twice daily against a resistance equivalent to 50 % maximum inspiratory mouth pressure (MIP) for 6 wk. The placebo group performed 60 breaths once daily, for 6 wk, at a resistance equivalent to 15 % MIP, a load known to elicit negligible changes in respiratory muscle function. The IMT group improved total recovery time during the repetitive sprint test by 6.2 +/- 1.1 % (mean +/- SEM) above the changes noted for the placebo group (p = 0.006). Blood lactate and perceptual responses to submaximal exercise were also significantly attenuated following IMT (p attenuates the blood lactate and perceptual responses to submaximal endurance exercise. In addition, the present study provides new evidence that IMT improves recovery time during high intensity, intermittent exercise in repetitive sprint athletes.

  16. The neurobiology of repetitive behavior : of mice…

    NARCIS (Netherlands)

    Langen, Marieke; Kas, Martien J H; Staal, Wouter G; van Engeland, Herman; Durston, Sarah

    2011-01-01

    Repetitive and stereotyped behavior is a prominent element of both animal and human behavior. Similar behavior is seen across species, in diverse neuropsychiatric disorders and in key phases of typical development. This raises the question whether these similar classes of behavior are caused by simi

  17. Large-scale detection of repetitions.

    Science.gov (United States)

    Smyth, W F

    2014-05-28

    Combinatorics on words began more than a century ago with a demonstration that an infinitely long string with no repetitions could be constructed on an alphabet of only three letters. Computing all the repetitions (such as ∙∙∙TTT ∙∙∙ or ∙∙∙ CGACGA ∙∙∙ ) in a given string x of length n is one of the oldest and most important problems of computational stringology, requiring time in the worst case. About a dozen years ago, it was discovered that repetitions can be computed as a by-product of the Θ(n)-time computation of all the maximal periodicities or runs in x. However, even though the computation is linear, it is also brute force: global data structures, such as the suffix array, the longest common prefix array and the Lempel-Ziv factorization, need to be computed in a preprocessing phase. Furthermore, all of this effort is required despite the fact that the expected number of runs in a string is generally a small fraction of the string length. In this paper, I explore the possibility that repetitions (perhaps also other regularities in strings) can be computed in a manner commensurate with the size of the output.

  18. Verbal Repetitions and Echolalia in Alzheimer's Discourse

    Science.gov (United States)

    Da Cruz, Fernanda Miranda

    2010-01-01

    This article reports on an investigation of echolalic repetition in Alzheimer's disease (AD). A qualitative analysis of data from spontaneous conversations with MHI, a woman with AD, is presented. The data come from the DALI Corpus, a corpus of spontaneous conversations involving subjects with AD. This study argues that echolalic effects can be…

  19. Neurobehavioural Correlates of Abnormal Repetitive Behaviour

    Directory of Open Access Journals (Sweden)

    R. A. Ford

    1991-01-01

    Full Text Available Conditions in which echolalia and echopraxia occur are reviewed, followed by an attempt to elicit possible mechanisms of these phenomena. A brief description of stereotypical and perseverative behaviour and obsessional phenomena is given. It is suggested that abnormal repetitive behaviour may occur partly as a result of central dopaminergic dysfunction.

  20. Reducing Repetitive Speech: Effects of Strategy Instruction.

    Science.gov (United States)

    Dipipi, Caroline M.; Jitendra, Asha K.; Miller, Judith A.

    2001-01-01

    This article describes an intervention with an 18-year-old young woman with mild mental retardation and a seizure disorder, which focused on her repetitive echolalic verbalizations. The intervention included time delay, differential reinforcement of other behaviors, and self-monitoring. Overall, the intervention was successful in facilitating…

  1. Verbal Repetitions and Echolalia in Alzheimer's Discourse

    Science.gov (United States)

    Da Cruz, Fernanda Miranda

    2010-01-01

    This article reports on an investigation of echolalic repetition in Alzheimer's disease (AD). A qualitative analysis of data from spontaneous conversations with MHI, a woman with AD, is presented. The data come from the DALI Corpus, a corpus of spontaneous conversations involving subjects with AD. This study argues that echolalic effects can be…

  2. Transition Energies and Absorption Oscillator Strengths for {{c}_{4}}^{\\prime 1}{{{\\rm{\\Sigma }}}_{u}}^{+}-{{\\rm{X}}}^{1}{{{\\rm{\\Sigma }}}_{g}}^{+}, {b}^{\\prime 1}{{{\\rm{\\Sigma }}}_{u}}^{+}-{{\\rm{X}}}^{1}{{{\\rm{\\Sigma }}}_{g}}^{+}, and {{c}_{5}}^{\\prime 1}{{{\\rm{\\Sigma }}}_{u}}^{+}-{{\\rm{X}}}^{1}{{{\\rm{\\Sigma }}}_{g}}^{+} Band Systems in N2

    Science.gov (United States)

    Lavín, C.; Velasco, A. M.

    2017-04-01

    Theoretical transition energies and absorption oscillator strengths for the {{c}4}\\prime 1{{{{Σ }}}u}+ (v‧ = 0–2, 5, 7, 8) ‑ {{{X}}}1{{{{Σ }}}g}+(v\\prime\\prime =0{--}14) and {{c}5}\\prime 1{{{{Σ }}}u}+ (v‧ = 0, 2) ‑ {{{X}}}1{{{{Σ }}}g}+ (v″ = 0–14) Rydberg bands, and {b}\\prime 1{{{{Σ }}}u}+ (v‧ = 0–9, 11, 12, 14–19, 21, 22) ‑ {{{X}}}1{{{{Σ }}}g}+ (v″ = 0–14) valence bands of molecular nitrogen are reported. The strong interaction between {}1{{{{Σ }}}u}+ states has been dealt with through a vibronic interaction matrix. As a consequence of the Rydberg-valence interaction, irregularities in the vibrational structure of the above band systems are observed. Good agreement is found with the scarce high-resolution data that are available for oscillator strengths. The new band oscillator strengths reported here may be useful for a reliable interpretation of the spectra from atmospheres of the Earth, Titan, and Triton, where {{{N}}}2 is the mayor constituent.

  3. Optimizing strategy software for repetitive construction projects within multi-mode resources

    OpenAIRE

    Remon Fayek Aziz

    2013-01-01

    Estimating tender data for specific project is the most essential part in construction areas as of contractor’s view such as: proposed project duration with corresponding gross value and cash flows. This paper focuses on how to calculate tender data using Optimizing Strategy Software (OSS) for repetitive construction projects with identical activity’s duration in case of single number of crew such as: project duration, project/bid price, project maximum working capital, and project net presen...

  4. Robust Repetitive Controller for Fast AFM Imaging

    CERN Document Server

    Necipoglu, Serkan; Has, Yunus; Guvenc, Levent; Basdogan, Cagatay

    2012-01-01

    Currently, Atomic Force Microscopy (AFM) is the most preferred Scanning Probe Microscopy (SPM) method due to its numerous advantages. However, increasing the scanning speed and reducing the interaction forces between the probe's tip and the sample surface are still the two main challenges in AFM. To meet these challenges, we take advantage of the fact that the lateral movements performed during an AFM scan is a repetitive motion and propose a Repetitive Controller (RC) for the z-axis movements of the piezo-scanner. The RC utilizes the profile of the previous scan line while scanning the current line to achieve a better scan performance. The results of the scanning experiments performed with our AFM set-up show that the proposed RC significantly outperforms a conventional PI controller that is typically used for the same task. The scan error and the average tapping forces are reduced by 66% and 58%, respectively when the scan speed is increased by 7-fold.

  5. A repetitive elements perspective in Polycomb epigenetics.

    Directory of Open Access Journals (Sweden)

    Valentina eCasa

    2012-10-01

    Full Text Available Repetitive elements comprise over two-thirds of the human genome. For a long time, these elements have received little attention since they were considered non functional. On the contrary, recent evidence indicates that they play central roles in genome integrity, gene expression and disease. Indeed, repeats display meiotic instability associated with disease and are located within common fragile sites, which are hotspots of chromosome rearrangements in tumors. Moreover, a variety of diseases have been associated with aberrant transcription of repetitive elements. Overall this indicates that appropriate regulation of repetitive elements’ activity is fundamental.Polycomb group (PcG proteins are epigenetic regulators that are essential for the normal development of multicellular organisms. Mammalian PcG proteins are involved in fundamental processes, such as cellular memory, cell proliferation, genomic imprinting, X-inactivation, and cancer development. PcG proteins can convey their activity through long-distance interactions also on different chromosomes. This indicates that the 3D organization of PcG proteins contributes significantly to their function. However, it is still unclear how these complex mechanisms are orchestrated and which role PcG proteins play in the multi-level organization of gene regulation. Intriguingly, the greatest proportion of Polycomb-mediated chromatin modifications is located in genomic repeats and it has been suggested that they could provide a binding platform for Polycomb proteins.Here, these lines of evidence are woven together to discuss how repetitive elements could contribute to chromatin organization in the 3D nuclear space.

  6. Emotional arousal enhances word repetition priming

    OpenAIRE

    Thomas, Laura A.; LaBar, Kevin S.

    2005-01-01

    Three experiments were conducted to determine if emotional content increases repetition priming magnitude. In the study phase of Experiment 1, participants rated high-arousing negative (taboo) words and neutral words for concreteness. In the test phase, they made lexical decision judgements for the studied words intermixed with novel words (half taboo, half neutral) and pseudowords. In Experiment 2, low-arousing negative (LAN) words were substituted for the taboo words, and in Experiment 3 al...

  7. The Rhythms of Echo. Variations on Repetition

    Directory of Open Access Journals (Sweden)

    Rosa María Aradra Sánchez

    2015-04-01

    Full Text Available This paper presents a study on the echo as metric and rhetorical procedure. It makes a brief tour through some of the poetic manifestations of echo in the Spanish literary tradition, and a brief tour through the attention that metric theory has paid to this phenomenon. Then it stops at the possibilities that rhetoric offers for its analysis from the generic approach of the discursive repetition phenomena.

  8. Repetitive behaviour in autism: Imaging pathways and trajectories

    NARCIS (Netherlands)

    Langen, M.J.G.

    2009-01-01

    Repetitive behaviour in autism: Imaging pathways and trajectories Repetitive and rigid behaviour is one of the core symptoms of autism, a severe and lifelong child psychiatric disorder. Although repetitive behaviour symptoms often form a significant impairment for affected individuals, systematic st

  9. Neural Correlates of Restricted, Repetitive Behaviors in Autism Spectrum Disorders

    Science.gov (United States)

    2014-12-01

    Restrictive Repetitive Behaviors in Autism Spectrum Disorder . Authors: T.Q.Nguyen, B...Manoach. Functional Connectivity of the Dorsal Anterior Cingulate Cortex Predicts Restrictive Repetitive Behaviors in Autism Spectrum Disorder We...Introduction: Although restricted , repetitive behaviors (RRBs) are a highly disabling core feature of Autism Spectrum Disorders (ASDs), they

  10. Lingual Kinematics during Rapid Syllable Repetition in Parkinson's Disease

    Science.gov (United States)

    Wong, Min Ney; Murdoch, Bruce E.; Whelan, Brooke-Mai

    2012-01-01

    Background: Rapid syllable repetition tasks are commonly used in the assessment of motor speech disorders. However, little is known about the articulatory kinematics during rapid syllable repetition in individuals with Parkinson's disease (PD). Aims: To investigate and compare lingual kinematics during rapid syllable repetition in dysarthric…

  11. Repetitive Elements in Mycoplasma hyopneumoniae Transcriptional Regulation

    Science.gov (United States)

    Cattani, Amanda Malvessi; Siqueira, Franciele Maboni; Guedes, Rafael Lucas Muniz; Schrank, Irene Silveira

    2016-01-01

    Transcriptional regulation, a multiple-step process, is still poorly understood in the important pig pathogen Mycoplasma hyopneumoniae. Basic motifs like promoters and terminators have already been described, but no other cis-regulatory elements have been found. DNA repeat sequences have been shown to be an interesting potential source of cis-regulatory elements. In this work, a genome-wide search for tandem and palindromic repetitive elements was performed in the intergenic regions of all coding sequences from M. hyopneumoniae strain 7448. Computational analysis demonstrated the presence of 144 tandem repeats and 1,171 palindromic elements. The DNA repeat sequences were distributed within the 5’ upstream regions of 86% of transcriptional units of M. hyopneumoniae strain 7448. Comparative analysis between distinct repetitive sequences found in related mycoplasma genomes demonstrated different percentages of conservation among pathogenic and nonpathogenic strains. qPCR assays revealed differential expression among genes showing variable numbers of repetitive elements. In addition, repeats found in 206 genes already described to be differentially regulated under different culture conditions of M. hyopneumoniae strain 232 showed almost 80% conservation in relation to M. hyopneumoniae strain 7448 repeats. Altogether, these findings suggest a potential regulatory role of tandem and palindromic DNA repeats in the M. hyopneumoniae transcriptional profile. PMID:28005945

  12. Modeling repetitive motions using structured light.

    Science.gov (United States)

    Xu, Yi; Aliaga, Daniel G

    2010-01-01

    Obtaining models of dynamic 3D objects is an important part of content generation for computer graphics. Numerous methods have been extended from static scenarios to model dynamic scenes. If the states or poses of the dynamic object repeat often during a sequence (but not necessarily periodically), we call such a repetitive motion. There are many objects, such as toys, machines, and humans, undergoing repetitive motions. Our key observation is that when a motion-state repeats, we can sample the scene under the same motion state again but using a different set of parameters; thus, providing more information of each motion state. This enables robustly acquiring dense 3D information difficult for objects with repetitive motions using only simple hardware. After the motion sequence, we group temporally disjoint observations of the same motion state together and produce a smooth space-time reconstruction of the scene. Effectively, the dynamic scene modeling problem is converted to a series of static scene reconstructions, which are easier to tackle. The varying sampling parameters can be, for example, structured-light patterns, illumination directions, and viewpoints resulting in different modeling techniques. Based on this observation, we present an image-based motion-state framework and demonstrate our paradigm using either a synchronized or an unsynchronized structured-light acquisition method.

  13. Repetitive element hypermethylation in multiple sclerosis patients.

    Science.gov (United States)

    Neven, K Y; Piola, M; Angelici, L; Cortini, F; Fenoglio, C; Galimberti, D; Pesatori, A C; Scarpini, E; Bollati, V

    2016-06-18

    Multiple sclerosis (MS) is a complex disorder of the central nervous system whose cause is currently unknown. Evidence is increasing that DNA methylation alterations could be involved in inflammatory and neurodegenerative diseases and could contribute to MS pathogenesis. Repetitive elements Alu, LINE-1 and SAT-α, are widely known as estimators of global DNA methylation. We investigated Alu, LINE-1 and SAT-α methylation levels to evaluate their difference in a case-control setup and their role as a marker of disability. We obtained blood samples from 51 MS patients and 137 healthy volunteers matched by gender, age and smoking. Methylation was assessed using bisulfite-PCR-pyrosequencing. For all participants, medical history, physical and neurological examinations and screening laboratory tests were collected. All repetitive elements were hypermethylated in MS patients compared to healthy controls. A lower Expanded Disability Status Scale (EDSS) score was associated with a lower levels of LINE-1 methylation for 'EDSS = 1.0' and '1.5 ≤ EDSS ≤ 2.5' compared to an EDSS higher than 3, while Alu was associated with a higher level of methylation in these groups: 'EDSS = 1.0' and '1.5 ≤ EDSS ≤ 2.5'. MS patients exhibit an hypermethylation in repetitive elements compared to healthy controls. Alu and LINE-1 were associated with degree of EDSS score. Forthcoming studies focusing on epigenetics and the multifactorial pathogenetic mechanism of MS could elucidate these links further.

  14. FRB repetition and non-Poissonian statistics

    CERN Document Server

    Connor, Liam; Oppermann, Niels

    2016-01-01

    We discuss some of the claims that have been made regarding the statistics of fast radio bursts (FRBs). In an earlier paper \\citep{2015arXiv150505535C} we conjectured that flicker noise associated with FRB repetition could show up in non-cataclysmic neutron star emission models, like supergiant pulses. We show how the current limits of repetition would be significantly weakened if their repeat rate really were non-Poissonian and had a pink or red spectrum. Repetition and its statistics have implications for observing strategy, generally favouring shallow wide-field surveys, since in the non-repeating scenario survey depth is unimportant. We also discuss the statistics of the apparent latitudinal dependence of FRBs, and offer a simple method for calculating the significance of this effect. We provide a generalized Bayesian framework for addressing this problem, which allows for direct model comparison. It is shown how the evidence for a steep latitudinal gradient of the FRB rate is less strong than initially s...

  15. Repetition priming in selective attention: A TVA analysis.

    Science.gov (United States)

    Ásgeirsson, Árni Gunnar; Kristjánsson, Árni; Bundesen, Claus

    2015-09-01

    Current behavior is influenced by events in the recent past. In visual attention, this is expressed in many variations of priming effects. Here, we investigate color priming in a brief exposure digit-recognition task. Observers performed a masked odd-one-out singleton recognition task where the target-color either repeated or changed between subsequent trials. Performance was measured by recognition accuracy over exposure durations. The purpose of the study was to replicate earlier findings of perceptual priming in brief displays and to model those results based on a Theory of Visual Attention (TVA; Bundesen, 1990). We tested 4 different definitions of a generic TVA-model and assessed their explanatory power. Our hypothesis was that priming effects could be explained by selective mechanisms, and that target-color repetitions would only affect the selectivity parameter (α) of our models. Repeating target colors enhanced performance for all 12 observers. As predicted, this was only true under conditions that required selection of a target among distractors, but not when a target was presented alone. Model fits by TVA were obtained with a trial-by-trial maximum likelihood estimation procedure that estimated 4-15 free parameters, depending on the particular model. We draw two main conclusions. Color priming can be modeled simply as a change in selectivity between conditions of repetition or swap of target color. Depending on the desired resolution of analysis; priming can accurately be modeled by a simple four parameter model, where VSTM capacity and spatial biases of attention are ignored, or more fine-grained by a 10 parameter model that takes these aspects into account. Copyright © 2015 Elsevier B.V. All rights reserved.

  16. OECD Maximum Residue Limit Calculator

    Science.gov (United States)

    With the goal of harmonizing the calculation of maximum residue limits (MRLs) across the Organisation for Economic Cooperation and Development, the OECD has developed an MRL Calculator. View the calculator.

  17. Passively Mode-Locked Fiber Laser with a Sub-Megahertz Repetition Rate

    Institute of Scientific and Technical Information of China (English)

    CHEN Jiong; JIA Dong-Fang; WU Yong-Chao; WANG Chang-Le; WANG Zhao-Ying; YANG Tian-Xin

    2011-01-01

    We demonstrate an ultra-long cavity by which an all-fiber erbium-doped fiber laser is passively mode-locked by nonlinear polarization rotation.The length of the resonant cavity amounts to 466m,which can be achieved by incorporating a 420m highly nonlinear fiber.The laser generates stable mode-locked pulses with a 444 kHz fundamental repetition rate.A near transform-limited subpicosecond pulse is obtained without any dispersion compensation.The maximum average power of the output pulses is 5.16 mW,which corresponds to a per-pulse energy of 11.62nJ.A low-repetition-rate optical pulse train is required for many applications such as micromachining,biomedical diagnostics and lidar systems.[1-3] However,the repetition rate of conventional fiber lasers is normally tens of MHz.Pulse pickers such as Pockels cells or acousto-optic modulators are always used to lower the repetition rate,however,reduction in this way introduces significant energy losses,impairs the signal-to-noise ratio (SNR) and increases complexity.Because the pulse repetition rate of a modelocked laser is inversely proportional to its resonator length,longer cavities lead to lower pulse repetition rates and,consequently,to higher pulse energy at the same average power of radiation.%We demonstrate an ultra-long cavity by which an all-fiber erbium-doped fiber laser is passively mode-locked by nonlinear polarization rotation. The length of the resonant cavity amounts to 466 m, which can be achieved by incorporating a 420 m highly nonlinear fiber. The laser generates stable mode-locked pulses with a 444 kHz fundamental repetition rate. A near transform-limited subpicosecond pulse is obtained without any dispersion compensation. The maximum average power of the output pulses is 5.16mW, which corresponds to a per-pulse energy of 11.62 nJ.

  18. fMRI repetition suppression: neuronal adaptation or stimulus expectation?

    Science.gov (United States)

    Larsson, Jonas; Smith, Andrew T

    2012-03-01

    Measurements of repetition suppression with functional magnetic resonance imaging (fMRI adaptation) have been used widely to probe neuronal population response properties in human cerebral cortex. fMRI adaptation techniques assume that fMRI repetition suppression reflects neuronal adaptation, an assumption that has been challenged on the basis of evidence that repetition-related response changes may reflect unrelated factors, such as attention and stimulus expectation. Specifically, Summerfield et al. (Summerfield C, Trittschuh EH, Monti JM, Mesulam MM, Egner T. 2008. Neural repetition suppression reflects fulfilled perceptual expectations. Nat Neurosci. 11:1004-1006) reported that the relative frequency of stimulus repetitions and non-repetitions influenced the magnitude of repetition suppression in the fusiform face area, suggesting that stimulus expectation accounted for most of the effect of repetition. We confirm that stimulus expectation can significantly influence fMRI repetition suppression throughout visual cortex and show that it occurs with long as well as short adaptation durations. However, the effect was attention dependent: When attention was diverted away from the stimuli, the effects of stimulus expectation completely disappeared. Nonetheless, robust and significant repetition suppression was still evident. These results suggest that fMRI repetition suppression reflects a combination of neuronal adaptation and attention-dependent expectation effects that can be experimentally dissociated. This implies that with an appropriate experimental design, fMRI adaptation can provide valid measures of neuronal adaptation and hence response specificity.

  19. Effect of resistive training on the maximum strenght,flexibility and functional autonomy of elderly woman

    Directory of Open Access Journals (Sweden)

    Estélio Henrique Martin Dantas

    2006-12-01

    Full Text Available The objective of this study was to investigate the effects of resistive training on maximum strength, flexibility and functional autonomy, as well as the correlation between maximum strength and functional autonomy of the elderly women (strength group, GF, n=11, = 66.3 ± 7.84 years/control group, GC, n=11, =65.1 ± 3.33 years. They participated of a resistive training (75-85% 1RM during 16 weeks, 2 days/week. Statistical procedures were Pearson’s correlation and Student t-test, using the SPSS package, version 12.0. Data showed signifi cant results for GF on the strength, fl exibility and functional autonomy, and signifi cant correlation between strength and functional autonomy (r=-0.67. The data suggested that training program enhances performance in activities of daily living with a training protocol of only 2 days/week. RESUMO O objetivo desse estudo foi verifi car os efeitos do treinamento resistido na força máxima, na fl exibilidade e na autonomia funcional, bem como a correlação existente entre a força máxima e a autonomia funcional de idosas (grupo de força - GF n=11, = 66,3±7,84 anos e um grupo controle - GC n=11, =65,1±3,33 anos. O GF foi submetido a um treinamento contra resistência de força (75-85% 1RM, por 16 semanas, 2 dias/semana. O tratamento estatístico utilizado foi correlação de Pearson e o teste “t” de Student. Os dados mostraram resultados signifi cativos do GF no ganho da força máxima, fl exibilidade e autonomia funcional, e correlação signifi cativa entre a força máxima medida no exercício supino reto (SR e o teste de autonomia funcional levantar da posição de decúbito ventral (LPDV (r=-0,67. Os dados sugerem que o programa de treinamento melhorou o desempenho das atividades da vida diária da amostra, com um treinamento de apenas 2 dias/semana.

  20. Repetitive magnetic stimulation affects the microenvironment of nerve regeneration and evoked potentials after spinal cord injury.

    Science.gov (United States)

    Jiang, Jin-Lan; Guo, Xu-Dong; Zhang, Shu-Quan; Wang, Xin-Gang; Wu, Shi-Feng

    2016-05-01

    Repetitive magnetic stimulation has been shown to alter local blood flow of the brain, excite the corticospinal tract and muscle, and induce motor function recovery. We established a rat model of acute spinal cord injury using the modified Allen's method. After 4 hours of injury, rat models received repetitive magnetic stimulation, with a stimulus intensity of 35% maximum output intensity, 5-Hz frequency, 5 seconds for each sequence, and an interval of 2 minutes. This was repeated for a total of 10 sequences, once a day, 5 days in a week, for 2 consecutive weeks. After repetitive magnetic stimulation, the number of apoptotic cells decreased, matrix metalloproteinase 9/2 gene and protein expression decreased, nestin expression increased, somatosensory and motor-evoked potentials recovered, and motor function recovered in the injured spinal cord. These findings confirm that repetitive magnetic stimulation of the spinal cord improved the microenvironment of neural regeneration, reduced neuronal apoptosis, and induced neuroprotective and repair effects on the injured spinal cord.

  1. Repetitive magnetic stimulation affects the microenvironment of nerve regeneration and evoked potentials after spinal cord injury

    Directory of Open Access Journals (Sweden)

    Jin-lan Jiang

    2016-01-01

    Full Text Available Repetitive magnetic stimulation has been shown to alter local blood flow of the brain, excite the corticospinal tract and muscle, and induce motor function recovery. We established a rat model of acute spinal cord injury using the modified Allen′s method. After 4 hours of injury, rat models received repetitive magnetic stimulation, with a stimulus intensity of 35% maximum output intensity, 5-Hz frequency, 5 seconds for each sequence, and an interval of 2 minutes. This was repeated for a total of 10 sequences, once a day, 5 days in a week, for 2 consecutive weeks. After repetitive magnetic stimulation, the number of apoptotic cells decreased, matrix metalloproteinase 9/2 gene and protein expression decreased, nestin expression increased, somatosensory and motor-evoked potentials recovered, and motor function recovered in the injured spinal cord. These findings confirm that repetitive magnetic stimulation of the spinal cord improved the microenvironment of neural regeneration, reduced neuronal apoptosis, and induced neuroprotective and repair effects on the injured spinal cord.

  2. Sands subjected to repetitive vertical loading under zero lateral strain: accumulation models, terminal densities, and settlement

    KAUST Repository

    Chong, Song Hun

    2016-08-09

    Geosystems often experience numerous loading cycles. Plastic strain accumulation during repetitive mechanical loads can lead to shear shakedown or continued shear ratcheting; in all cases, volumetric strains diminish as the specimen evolves towards terminal density. Previously suggested models and new functions are identified to fit plastic strain accumulation data. All accumulation models are formulated to capture terminal density (volumetric strain) and either shakedown or ratcheting (shear strain). Repetitive vertical loading tests under zero lateral strain conditions are conducted using three different sands packed at initially low and high densities. Test results show that plastic strain accumulation for all sands and density conditions can be captured in the same dimensionless plot defined in terms of the initial relative density, terminal density, and ratio between the amplitude of the repetitive load and the initial static load. This observation allows us to advance a simple but robust procedure to estimate the maximum one-dimensional settlement that a foundation could experience if subjected to repetitive loads. © 2016, Canadian Science Publishing. All rights reserved.

  3. Reliability and validity of the five-repetition sit-to-stand test for children with cerebral palsy.

    Science.gov (United States)

    Wang, Tze-Hsuan; Liao, Hua-Fang; Peng, Yi-Chun

    2012-07-01

    OBJECTIVE To investigate the psychometric properties of the five-repetition sit-to-stand test, a functional strength test, in children with spastic diplegia. Methodology study. Hospital, laboratory or home. In total, 108 children with spastic diplegia and 62 with typical development aged from five to 12 years were tested. For test-retest reliability, 22 children with spastic diplegia were tested twice within one week. Not applicable. The five-repetition sit-to-stand test measures time needed to complete five consecutive sit-to-stand cycles as quickly as possible. The higher the rate of five-repetition sit-to-stand (repetitions per second), the more strength a person has. The intraclass correlation coefficients of intra-session reliability and test-retest reliability were 0.95 and 0.99 respectively. The minimal detectable difference was 0.06 rep/sec. The convergent validity of the five-repetition sit-to-stand test was supported by significant correlation with one-repetition maximum of the loaded sit-to-stand test, isometric muscle strength, scores of Gross Motor Function Measure, and gait function (r or rho = 0.40-0.78). For known group validity, children with typical development and children classified as Gross Motor Function Classification System level I performed higher rates of five-repetition sit-to-stand than children classified as level II, and children classified as level II performed higher rates than level III. The five-repetition sit-to-stand test was a reliable and valid test to measure functional muscle strength in children with spastic diplegia in clinics.

  4. The effect of a multidimensional exercise intervention on physical capacity, well-being and quality of life in cancer patients undergoing chemotherapy

    DEFF Research Database (Denmark)

    Adamsen, Lis; Quist, Morten; Midtgaard, Julie

    2006-01-01

    The aim of the present study was to investigate the impact of a multidimensional exercise intervention focusing on physical capacity; one-repetition maximum (1RM) and maximum oxygen uptake (VO2Max), activity level, general well-being and quality of life in cancer patients undergoing chemotherapy....

  5. Storytelling and Repetitive Narratives for Design Empathy

    DEFF Research Database (Denmark)

    Fritsch, Jonas; Judice, Andrea; Soini, Katja

    2007-01-01

    Today it is widely established in design research that empathy is an important part of creating a true understanding of user experience as a resource for design. A typical challenge is how to transmit the feeling of empathy acquired by user studies to designers who have not participated in the user...... study. In this paper, we show how we attained an empathic understanding through storytelling and aroused empathy to others using repetitive narratives in an experimental presentation bringing forth factual, reflective and experiential aspects of the user information. Taking as a starting point our...... experiences with the design project Suomenlinna Seclusive, we conclude with the potential of using narratives for invoking design empathy....

  6. A miniature high repetition rate shock tube.

    Science.gov (United States)

    Tranter, R S; Lynch, P T

    2013-09-01

    A miniature high repetition rate shock tube with excellent reproducibility has been constructed to facilitate high temperature, high pressure, gas phase experiments at facilities such as synchrotron light sources where space is limited and many experiments need to be averaged to obtain adequate signal levels. The shock tube is designed to generate reaction conditions of T > 600 K, P shock waves with predictable characteristics are created, repeatably. Two synchrotron-based experiments using this apparatus are also briefly described here, demonstrating the potential of the shock tube for research at synchrotron light sources.

  7. Storytelling and Repetitive Narratives for Design Empathy

    DEFF Research Database (Denmark)

    Fritsch, Jonas; Judice, Andrea; Soini, Katja

    2007-01-01

    Today it is widely established in design research that empathy is an important part of creating a true understanding of user experience as a resource for design. A typical challenge is how to transmit the feeling of empathy acquired by user studies to designers who have not participated in the user...... study. In this paper, we show how we attained an empathic understanding through storytelling and aroused empathy to others using repetitive narratives in an experimental presentation bringing forth factual, reflective and experiential aspects of the user information. Taking as a starting point our...... experiences with the design project Suomenlinna Seclusive, we conclude with the potential of using narratives for invoking design empathy....

  8. The repetitive component of the sunflower genome

    Directory of Open Access Journals (Sweden)

    T. Giordani

    2014-08-01

    Full Text Available The sunflower (Helianthus annuus and species belonging to the genus Helianthus are emerging as a model species and genus for a number of studies on genome evolution. In this review, we report on the repetitive component of the H. annuus genome at the biochemical, molecular, cytological, and genomic levels. Recent work on sunflower genome composition is described, with emphasis on different types of repeat sequences, especially LTR-retrotransposons, of which we report on isolation, characterisation, cytological localisation, transcription, dynamics of proliferation, and comparative analyses within the genus Helianthus.

  9. Maximum margin Bayesian network classifiers.

    Science.gov (United States)

    Pernkopf, Franz; Wohlmayr, Michael; Tschiatschek, Sebastian

    2012-03-01

    We present a maximum margin parameter learning algorithm for Bayesian network classifiers using a conjugate gradient (CG) method for optimization. In contrast to previous approaches, we maintain the normalization constraints on the parameters of the Bayesian network during optimization, i.e., the probabilistic interpretation of the model is not lost. This enables us to handle missing features in discriminatively optimized Bayesian networks. In experiments, we compare the classification performance of maximum margin parameter learning to conditional likelihood and maximum likelihood learning approaches. Discriminative parameter learning significantly outperforms generative maximum likelihood estimation for naive Bayes and tree augmented naive Bayes structures on all considered data sets. Furthermore, maximizing the margin dominates the conditional likelihood approach in terms of classification performance in most cases. We provide results for a recently proposed maximum margin optimization approach based on convex relaxation. While the classification results are highly similar, our CG-based optimization is computationally up to orders of magnitude faster. Margin-optimized Bayesian network classifiers achieve classification performance comparable to support vector machines (SVMs) using fewer parameters. Moreover, we show that unanticipated missing feature values during classification can be easily processed by discriminatively optimized Bayesian network classifiers, a case where discriminative classifiers usually require mechanisms to complete unknown feature values in the data first.

  10. Maximum Entropy in Drug Discovery

    Directory of Open Access Journals (Sweden)

    Chih-Yuan Tseng

    2014-07-01

    Full Text Available Drug discovery applies multidisciplinary approaches either experimentally, computationally or both ways to identify lead compounds to treat various diseases. While conventional approaches have yielded many US Food and Drug Administration (FDA-approved drugs, researchers continue investigating and designing better approaches to increase the success rate in the discovery process. In this article, we provide an overview of the current strategies and point out where and how the method of maximum entropy has been introduced in this area. The maximum entropy principle has its root in thermodynamics, yet since Jaynes’ pioneering work in the 1950s, the maximum entropy principle has not only been used as a physics law, but also as a reasoning tool that allows us to process information in hand with the least bias. Its applicability in various disciplines has been abundantly demonstrated. We give several examples of applications of maximum entropy in different stages of drug discovery. Finally, we discuss a promising new direction in drug discovery that is likely to hinge on the ways of utilizing maximum entropy.

  11. False-Positive Clostridium difficile in Negative-Control Reactions Peak and Then Decrease with Repetitive Refrigeration of Immunoassay.

    Science.gov (United States)

    Rodriguez-Palacios, Alexander; Stämpfli, Henry R; Chang, Yung-Fu

    2014-01-01

    Aberrant false-positive reactions in negative-controls during ELISA testing for Clostridium difficile indicated the potential for false-diagnoses. Experiments with 96-well products showed a maximum peak of false-positive immunoassay reactions with the provided negative-control reagents after 5 refrigeration-to-room temperature cycles (P refrigeration cycles. Because repetitive refrigeration causes a peak of false-positives, the use of single negative-controls per ELISA run might be insufficient to monitor aberrant preanalytical false-positives if immunoassays are subject to repetitive refrigeration.

  12. Optimizing strategy for repetitive construction projects within multi-mode resources

    Directory of Open Access Journals (Sweden)

    Remon Fayek Aziz

    2013-03-01

    Full Text Available Estimating tender data for specific project is the most essential part in construction areas as of a contractor’s view such as: proposed project duration with corresponding gross value and cash flows. Cash flow analysis of construction projects has a long history and has been an important topic in construction management. Determination of project cash flows is very sensitive, especially for repetitive construction projects. This paper focuses on how to calculate tender data for repetitive construction projects such as: project duration, project cost, project/bid price, project cash flows, project maximum working capital and project net present value that is equivalent to net profit at the beginning of the project. A simplified multi-objective optimization formulation will be presented that creates best tender data to contractor comparing with more feasible options that are generated from multi-mode resources in a given project. This mathematical formulation is intended to give more scenarios which provide a practical support for typical construction contractors who need to optimize resource utilization in order to minimize project duration, project/bid price and project maximum working capital while maximizing its net present value simultaneously. At the end of the paper, an illustrative example will be presented to demonstrate the applications of proposed technique to an optimization expressway of repetitive construction project.

  13. A simple sub-nanosecond ultraviolet light pulse generator with high repetition rate and peak power.

    Science.gov (United States)

    Binh, P H; Trong, V D; Renucci, P; Marie, X

    2013-08-01

    We present a simple ultraviolet sub-nanosecond pulse generator using commercial ultraviolet light-emitting diodes with peak emission wavelengths of 290 nm, 318 nm, 338 nm, and 405 nm. The generator is based on step recovery diode, short-circuited transmission line, and current-shaping circuit. The narrowest pulses achieved have 630 ps full width at half maximum at repetition rate of 80 MHz. Optical pulse power in the range of several hundreds of microwatts depends on the applied bias voltage. The bias voltage dependences of the output optical pulse width and peak power are analysed and discussed. Compared to commercial UV sub-nanosecond generators, the proposed generator can produce much higher pulse repetition rate and peak power.

  14. A High Power and High Repetition Rate Modelocked Ti-Sapphire Laser for Photoinjectors

    Energy Technology Data Exchange (ETDEWEB)

    J. Hansknecht; M. Poelker

    2001-07-01

    A high power cw mode-locked Ti-sapphire laser has been constructed to drive the Jefferson Lab polarized photoinjector and provide > 500 mW average power with 50 ps pulsewidths at 499 MHz or 1497 MHz pulse repetition rates. This laser allows efficient, high current synchronous photoinjection for extended periods of time before intrusive steps must be taken to restore the quantum efficiency of the strained layer GaAs photocathode. The use of this laser has greatly enhanced the maximum high polarization beam current capability and operating lifetime of the Jefferson Lab photoinjector compared with previous performance using diode laser systems. A novel modelocking technique provides a simple means to phase-lock the optical pulse train of the laser to the accelerator and allows for operation at higher pulse repetition rates to {approx} 3 GHz without modification of the laser cavity. The laser design and characteristics are described below.

  15. Effects of different rest intervals between antagonist paired sets on repetition performance and muscle activation.

    Science.gov (United States)

    Maia, Marianna F; Willardson, Jeffrey M; Paz, Gabriel A; Miranda, Humberto

    2014-09-01

    Recent evidence suggests that exercising the antagonist musculature acutely enhances subsequent performance for the agonist musculature. The purpose of this study was to examine the effects of different rest intervals between sets for exercises that involve antagonistic muscle groups, a technique referred to as antagonist paired sets (APS). Fifteen recreationally trained men were tested for knee extension (KE) exercise performance, with or without previous knee flexion (KF) exercise for the antagonist musculature. The following protocols were performed in random order with 10 repetition maximum loads for the KF and KE exercises: (a) traditional protocol (TP)-1 set of KE only to repetition failure; (b) paired sets with minimal allowable rest (PMR)-1 set of KF followed immediately by a set of KE; (c) P30-30-second rest between paired sets of KF and KE; (d) P1-1-minute rest between paired sets; (e) P3-3-minute rest between paired sets; and (f) P5-5-minute rest between paired sets. The number of repetitions performed and electromyographic (EMG) activity of vastus lateralis, vastus medialis (VM), and rectus femoris (RF) muscles were recorded during the KE set in each protocol. It was demonstrated that significantly greater KE repetitions were completed during the PMR, P30, and P1 protocols vs. the TP protocol. Significantly greater EMG activity was demonstrated for the RF muscle during the KE exercise in the PMR and P30 vs. the TP, P3, and P5, respectively. In addition, significantly greater EMG activity was demonstrated for the VM muscle during the PMR vs. all other protocols. The results of this study indicate that no rest or relatively shorter rest intervals (30 seconds and 1 minute) between APS might be more effective to elicit greater agonist repetition enhancement and muscle activation.

  16. The role of short-term memory impairment in nonword repetition, real word repetition, and nonword decoding: A case study.

    Science.gov (United States)

    Peter, Beate

    2017-09-21

    In a companion study, adults with dyslexia and adults with a probable history of childhood apraxia of speech showed evidence of difficulty with processing sequential information during nonword repetition, multisyllabic real word repetition and nonword decoding. Results suggested that some errors arose in visual encoding during nonword reading, all levels of processing but especially short-term memory storage/retrieval during nonword repetition, and motor planning and programming during complex real word repetition. To further investigate the role of short-term memory, a participant with short-term memory impairment (MI) was recruited. MI was confirmed with poor performance during a sentence repetition and three nonword repetition tasks, all of which have a high short-term memory load, whereas typical performance was observed during tests of reading, spelling, and static verbal knowledge, all with low short-term memory loads. Experimental results show error-free performance during multisyllabic real word repetition but high counts of sequence errors, especially migrations and assimilations, during nonword repetition, supporting short-term memory as a locus of sequential processing deficit during nonword repetition. Results are also consistent with the hypothesis that during complex real word repetition, short-term memory is bypassed as the word is recognized and retrieved from long-term memory prior to producing the word.

  17. The Maximum Density of Water.

    Science.gov (United States)

    Greenslade, Thomas B., Jr.

    1985-01-01

    Discusses a series of experiments performed by Thomas Hope in 1805 which show the temperature at which water has its maximum density. Early data cast into a modern form as well as guidelines and recent data collected from the author provide background for duplicating Hope's experiments in the classroom. (JN)

  18. Abolishing the maximum tension principle

    CERN Document Server

    Dabrowski, Mariusz P

    2015-01-01

    We find the series of example theories for which the relativistic limit of maximum tension $F_{max} = c^2/4G$ represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.

  19. Abolishing the maximum tension principle

    Directory of Open Access Journals (Sweden)

    Mariusz P. Da̧browski

    2015-09-01

    Full Text Available We find the series of example theories for which the relativistic limit of maximum tension Fmax=c4/4G represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.

  20. A phonetic approach to consonant repetition in early words.

    Science.gov (United States)

    Kim, Namhee; Davis, Barbara L

    2015-08-01

    The goal of this study was to evaluate movement-based principles for understanding early speech output patterns. Consonant repetition patterns within children's actual productions of word forms were analyzed using spontaneous speech data from 10 typically developing American-English learning children between 12 and 36 months of age. Place of articulation, word level patterns, and developmental trends in CVC and CVCV repeated word forms were evaluated. Labial and coronal place repetitions dominated. Regressive repetition (e.g., [gag] for "dog") occurred frequently in CVC but not in CVCV word forms. Consonant repetition decreased over time. However, the children produced sound types available reported as being within young children's production system capabilities in consonant repetitions in all time periods. Findings suggest that a movement-based approach can provide a framework for comprehensively characterizing consonant place repetition patterns in early speech development.

  1. Repetition and Reactance in Graham’s "Underneath" Poems

    Directory of Open Access Journals (Sweden)

    Roghayeh Farsi

    2017-09-01

    Full Text Available The present paper gives a detailed analysis and interpretation of 16 poems in Jorie Graham's collection, Swarm (2000, which bear "UNDERNEATH" as their main titles. The poems are marked with different types of repetition such as graphological repetition, word, phrase, and sentential repetition, semantic repetition, and syntactic repetition. The study draws on Lakoff and Johnson's theories on metaphor and Brehm and Brehm’s reactance theory. It is argued "underneath" is a conceptual (orientational metaphor which signifies a state of being limited, lack of control and freedom, and loss of power. The paper investigates the speaker's reactant behavior in "Underneath" poems, seeking a way to restore her lost freedom. Reactance behaviors can be skepticism, inertia, aggression, and resistance. It is concluded despite her thematic inertia, representing her submission to the oppressed state, her stylistic reactance reflected in repetitions, innovations, and disruptive diction stands for her attempts to regain her lost control.

  2. High-repetition rate industrial TEA CO2 laser with average output power of 1.5 kW

    Science.gov (United States)

    Wan, Chongyi; Liu, Shiming; Zhou, Jinwen; Qi, Jilan; Yang, Xiaola; Wu, Jin; Tan, Rongqing; Wang, Lichun; Mei, Qichu

    1995-03-01

    High power high repetition rate TEA CO2 laser has potential importance in material processing such as shock hardening, glazing, drilling, welding, and cutting for high damage threshold materials, as well as in chemical reaction and isotope separation. This paper describes a transverse-flow closed-cycle UV-preionized TEA CO2 laser with peak pulse power of 20 MW, maximum average power of 1.5 KW at repetition rate of 300 HZ. The laser has compact constructure of gas flow circulation system using tangential fans. With addition of small amounts of H2 and CO to the normal CO2-N2-He gas mixture, one filling sealed operating lifetime is up to millions of pulses. A novel spark gap switch has been developed for very high repetition rate laser discharge in the condition of high pulse power.

  3. FEMA Hazard Mitigation Assistance Repetitive Flood Claims (RFC) Data

    Data.gov (United States)

    Department of Homeland Security — This dataset contains closed and obligated projects funded under the following Hazard Mitigation Assistance (HMA) grant programs: Repetitive Flood Claims (RFC). The...

  4. A review of neuroimaging findings in repetitive brain trauma.

    Science.gov (United States)

    Koerte, Inga K; Lin, Alexander P; Willems, Anna; Muehlmann, Marc; Hufschmidt, Jakob; Coleman, Michael J; Green, Isobel; Liao, Huijun; Tate, David F; Wilde, Elisabeth A; Pasternak, Ofer; Bouix, Sylvain; Rathi, Yogesh; Bigler, Erin D; Stern, Robert A; Shenton, Martha E

    2015-05-01

    Chronic traumatic encephalopathy (CTE) is a neurodegenerative disease confirmed at postmortem. Those at highest risk are professional athletes who participate in contact sports and military personnel who are exposed to repetitive blast events. All neuropathologically confirmed CTE cases, to date, have had a history of repetitive head impacts. This suggests that repetitive head impacts may be necessary for the initiation of the pathogenetic cascade that, in some cases, leads to CTE. Importantly, while all CTE appears to result from repetitive brain trauma, not all repetitive brain trauma results in CTE. Magnetic resonance imaging has great potential for understanding better the underlying mechanisms of repetitive brain trauma. In this review, we provide an overview of advanced imaging techniques currently used to investigate brain anomalies. We also provide an overview of neuroimaging findings in those exposed to repetitive head impacts in the acute/subacute and chronic phase of injury and in more neurodegenerative phases of injury, as well as in military personnel exposed to repetitive head impacts. Finally, we discuss future directions for research that will likely lead to a better understanding of the underlying mechanisms separating those who recover from repetitive brain trauma vs. those who go on to develop CTE.

  5. FEMA Hazard Mitigation Assistance Severe Repetitive Loss (SRL) Data

    Data.gov (United States)

    Department of Homeland Security — This dataset contains closed and obligated projects funded under the following Hazard Mitigation Assistance (HMA) grant programs: Severe Repetitive Loss (SRL). The...

  6. Repetitive control of electrically driven robot manipulators

    Science.gov (United States)

    Fateh, Mohammad Mehdi; Ahsani Tehrani, Hojjat; Karbassi, Seyed Mehdi

    2013-04-01

    This article presents a novel robust discrete repetitive control of electrically driven robot manipulators for tracking of a periodic trajectory. We propose a novel model, which presents the highly non-linear dynamics of robot manipulator in the form of linear discrete-time time-varying system. Based on the proposed model, we develop a two-term control law. The first term is an ordinary time-optimal and minimum-norm (TOMN) control by employing parametric controllers to guarantee stability. The second term is a novel robust control to improve the control performance in the face of uncertainties. The robust control estimates and compensates uncertainties including the parametric uncertainty, unmodelled dynamics and external disturbances. Performance of the proposed method is compared with two discrete methods, namely the TOMN control and an adaptive iterative learning (AIL) control. Simulation results confirm superiority of the proposed method in terms of the convergence speed and precision.

  7. Studies of the uncanny: the repetition factor

    Directory of Open Access Journals (Sweden)

    Julia Teitelroit Martins

    2011-06-01

    Full Text Available Freud’s essay The Uncanny (Das Unheimliche offers many indications for the comprehension of an aesthetics of the uncanny which deserve to be explored. Nonetheless, a concept traverses it from beginning to end: the return – which enables its reading under the light of Beyond the pleasure principle, written along the same span of time. Emphasis is given to the uncanny in the sense of repetition of the different – a paradox in terms, like the strangely familiar uncanny. In order to test the validity of an aesthetic reading under this perspective, follows an analysis of the brief short story “A terceira margem do rio” (“The third margin of the river”, by Guimarães Rosa.

  8. Object color affects identification and repetition priming.

    Science.gov (United States)

    Uttl, Bob; Graf, Peter; Santacruz, Pilar

    2006-10-01

    We investigated the influence of color on the identification of both non-studied and studied objects. Participants studied black and white and color photos of common objects and memory was assessed with an identification test. Consistent with our meta-analysis of prior research, we found that objects were easier to identify from color than from black and white photos. We also found substantial priming in all conditions, and study-to-test changes in an object's color reduced the magnitude of priming. Color-specific priming effects were large for color-complex objects, but minimal for color-simple objects. The pattern and magnitude of priming effects was not influenced either by the extent to which an object always appears in the same color (i.e., whether a color is symptomatic of an object) or by the object's origin (natural versus fabricated). We discuss the implications of our findings for theoretical accounts of object perception and repetition priming.

  9. Maximum Genus of Strong Embeddings

    Institute of Scientific and Technical Information of China (English)

    Er-ling Wei; Yan-pei Liu; Han Ren

    2003-01-01

    The strong embedding conjecture states that any 2-connected graph has a strong embedding on some surface. It implies the circuit double cover conjecture: Any 2-connected graph has a circuit double cover.Conversely, it is not true. But for a 3-regular graph, the two conjectures are equivalent. In this paper, a characterization of graphs having a strong embedding with exactly 3 faces, which is the strong embedding of maximum genus, is given. In addition, some graphs with the property are provided. More generally, an upper bound of the maximum genus of strong embeddings of a graph is presented too. Lastly, it is shown that the interpolation theorem is true to planar Halin graph.

  10. D(Maximum)=P(Argmaximum)

    CERN Document Server

    Remizov, Ivan D

    2009-01-01

    In this note, we represent a subdifferential of a maximum functional defined on the space of all real-valued continuous functions on a given metric compact set. For a given argument, $f$ it coincides with the set of all probability measures on the set of points maximizing $f$ on the initial compact set. This complete characterization lies in the heart of several important identities in microeconomics, such as Roy's identity, Sheppard's lemma, as well as duality theory in production and linear programming.

  11. The Testability of Maximum Magnitude

    Science.gov (United States)

    Clements, R.; Schorlemmer, D.; Gonzalez, A.; Zoeller, G.; Schneider, M.

    2012-12-01

    Recent disasters caused by earthquakes of unexpectedly large magnitude (such as Tohoku) illustrate the need for reliable assessments of the seismic hazard. Estimates of the maximum possible magnitude M at a given fault or in a particular zone are essential parameters in probabilistic seismic hazard assessment (PSHA), but their accuracy remains untested. In this study, we discuss the testability of long-term and short-term M estimates and the limitations that arise from testing such rare events. Of considerable importance is whether or not those limitations imply a lack of testability of a useful maximum magnitude estimate, and whether this should have any influence on current PSHA methodology. We use a simple extreme value theory approach to derive a probability distribution for the expected maximum magnitude in a future time interval, and we perform a sensitivity analysis on this distribution to determine if there is a reasonable avenue available for testing M estimates as they are commonly reported today: devoid of an appropriate probability distribution of their own and estimated only for infinite time (or relatively large untestable periods). Our results imply that any attempt at testing such estimates is futile, and that the distribution is highly sensitive to M estimates only under certain optimal conditions that are rarely observed in practice. In the future we suggest that PSHA modelers be brutally honest about the uncertainty of M estimates, or must find a way to decrease its influence on the estimated hazard.

  12. Alternative Multiview Maximum Entropy Discrimination.

    Science.gov (United States)

    Chao, Guoqing; Sun, Shiliang

    2016-07-01

    Maximum entropy discrimination (MED) is a general framework for discriminative estimation based on maximum entropy and maximum margin principles, and can produce hard-margin support vector machines under some assumptions. Recently, the multiview version of MED multiview MED (MVMED) was proposed. In this paper, we try to explore a more natural MVMED framework by assuming two separate distributions p1( Θ1) over the first-view classifier parameter Θ1 and p2( Θ2) over the second-view classifier parameter Θ2 . We name the new MVMED framework as alternative MVMED (AMVMED), which enforces the posteriors of two view margins to be equal. The proposed AMVMED is more flexible than the existing MVMED, because compared with MVMED, which optimizes one relative entropy, AMVMED assigns one relative entropy term to each of the two views, thus incorporating a tradeoff between the two views. We give the detailed solving procedure, which can be divided into two steps. The first step is solving our optimization problem without considering the equal margin posteriors from two views, and then, in the second step, we consider the equal posteriors. Experimental results on multiple real-world data sets verify the effectiveness of the AMVMED, and comparisons with MVMED are also reported.

  13. The golden ratio of gait harmony: repetitive proportions of repetitive gait phases.

    Science.gov (United States)

    Iosa, Marco; Fusco, Augusto; Marchetti, Fabio; Morone, Giovanni; Caltagirone, Carlo; Paolucci, Stefano; Peppe, Antonella

    2013-01-01

    In nature, many physical and biological systems have structures showing harmonic properties. Some of them were found related to the irrational number φ known as the golden ratio that has important symmetric and harmonic properties. In this study, the spatiotemporal gait parameters of 25 healthy subjects were analyzed using a stereophotogrammetric system with 25 retroreflective markers located on their skin. The proportions of gait phases were compared with φ, the value of which is about 1.6180. The ratio between the entire gait cycle and stance phase resulted in 1.620 ± 0.058, that between stance and the swing phase was 1.629 ± 0.173, and that between swing and the double support phase was 1.684 ± 0.357. All these ratios did not differ significantly from each other (F = 0.870, P = 0.422, repeated measure analysis of variance) or from φ (P = 0.670, 0.820, 0.422, resp., t-tests). The repetitive gait phases of physiological walking were found in turn in repetitive proportions with each other, revealing an intrinsic harmonic structure. Harmony could be the key for facilitating the control of repetitive walking. Harmony is a powerful unifying factor between seemingly disparate fields of nature, including human gait.

  14. The Golden Ratio of Gait Harmony: Repetitive Proportions of Repetitive Gait Phases

    Directory of Open Access Journals (Sweden)

    Marco Iosa

    2013-01-01

    Full Text Available In nature, many physical and biological systems have structures showing harmonic properties. Some of them were found related to the irrational number known as the golden ratio that has important symmetric and harmonic properties. In this study, the spatiotemporal gait parameters of 25 healthy subjects were analyzed using a stereophotogrammetric system with 25 retroreflective markers located on their skin. The proportions of gait phases were compared with , the value of which is about 1.6180. The ratio between the entire gait cycle and stance phase resulted in 1.620 ± 0.058, that between stance and the swing phase was 1.629 ± 0.173, and that between swing and the double support phase was 1.684 ± 0.357. All these ratios did not differ significantly from each other (, , repeated measure analysis of variance or from (, resp., t-tests. The repetitive gait phases of physiological walking were found in turn in repetitive proportions with each other, revealing an intrinsic harmonic structure. Harmony could be the key for facilitating the control of repetitive walking. Harmony is a powerful unifying factor between seemingly disparate fields of nature, including human gait.

  15. PREDIÇÃO DE FORÇA MÁXIMA E NÚMERO DE REPETIÇÕES NO EXERCÍCIO SUPINO DURANTE INTENSIDADES PARA HIPERTROFIA E ENDURANCE MUSCULAR

    Directory of Open Access Journals (Sweden)

    Frederico D’elia Rieder

    2014-04-01

    Full Text Available Objective: To analyze the number of maximum repetitions performed in the bench press exercise at intensities related to hypertrophy training and muscular endurance through prediction equation for 1-RM. Materials and Methods: nine male volunteers (27 ± 6.1 years who practice strength training for at least one year attended the laboratory on four occasions. The maximum force was identified by testing multiple repetitions (O'Conner et al, 1989. Tests were applied to repetition maximum intensities of 60, 70 and 80% of 1RM. Results: The estimated maximal dynamic strength was 81.1 ± 22.5 kg, with a minimum of 49 and maximum of 110 Kg. The numbers maximum of repetitions to 60, 70 and 80% (19 ± 3, 16.1 ± 3.1, 11.1 ± 0.9, respectively were different between one and another. Discussion: In the intensity of 80%, the maximum number maximum of repetitions was similar to Hoeger and collaborators. (1990 that assessed the number of repetitions until the concentric failure in trained men. Several factors may influence the results of the number of repetitions, among which we highlight execution speed, range of motion, and ability of neural activation, learning, reduced antagonist activity, motivation, muscle fiber type and size of the muscle group involved. Conclusion: The maximum number of repetitions at intensities of 60% and 80% of 1RM predicted through O'Conner and col. (1989 corresponded to the recommendations of the literature related to strength training prescription to get endurance and muscle hypertrophy, thereby exercise prescription for 1RM percentage loads predict by the equation O'Conner (1989 could be performed.

  16. Iconicity in Discourse: The Case of Repetition in Japanese.

    Science.gov (United States)

    Ishikawa, Minako

    This analysis of repeated utterances in Japanese conversational discourse focuses on repetition as an expression of iconicity. In the analysis of a 30-minute conversation among 4 Japanese speakers, the iconic meanings expressed by both reduplication and conversational repetition are highlighted. The iconicity characteristic of conversational data…

  17. Evidence-Based Behavioral Interventions for Repetitive Behaviors in Autism

    Science.gov (United States)

    Boyd, Brian A.; McDonough, Stephen G.; Bodfish, James W.

    2012-01-01

    Restricted and repetitive behaviors (RRBs) are a core symptom of autism spectrum disorders (ASD). There has been an increased research emphasis on repetitive behaviors; however, this research primarily has focused on phenomenology and mechanisms. Thus, the knowledge base on interventions is lagging behind other areas of research. The literature…

  18. Visual attention to advertising : The impact of motivation and repetition

    NARCIS (Netherlands)

    Pieters, RGM; Rosbergen, E; Hartog, M; Corfman, KP; Lynch, JG

    1996-01-01

    Using eye-tracking data, we examine the impact of motivation and repetition on visual attention to advertisements differing in argument quality. Our analyses indicate that repetition leads to an overall decrease in the amount of attention. However, while at first high motivation subjects attend to t

  19. On the Functions of Lexical Repetition in English Texts

    Institute of Scientific and Technical Information of China (English)

    XIAO Fuliang

    2016-01-01

    Lexical repetition, as a cohesive device of an English text, can help make up a cohesive and coherent text. Therefore, in English textual learning, it is helpful for students to know about different patterns and functions of lexical repetition to improve their English level and ability.

  20. Cacti with maximum Kirchhoff index

    OpenAIRE

    Wang, Wen-Rui; Pan, Xiang-Feng

    2015-01-01

    The concept of resistance distance was first proposed by Klein and Randi\\'c. The Kirchhoff index $Kf(G)$ of a graph $G$ is the sum of resistance distance between all pairs of vertices in $G$. A connected graph $G$ is called a cactus if each block of $G$ is either an edge or a cycle. Let $Cat(n;t)$ be the set of connected cacti possessing $n$ vertices and $t$ cycles, where $0\\leq t \\leq \\lfloor\\frac{n-1}{2}\\rfloor$. In this paper, the maximum kirchhoff index of cacti are characterized, as well...

  1. Generic maximum likely scale selection

    DEFF Research Database (Denmark)

    Pedersen, Kim Steenstrup; Loog, Marco; Markussen, Bo

    2007-01-01

    The fundamental problem of local scale selection is addressed by means of a novel principle, which is based on maximum likelihood estimation. The principle is generally applicable to a broad variety of image models and descriptors, and provides a generic scale estimation methodology. The focus...... on second order moments of multiple measurements outputs at a fixed location. These measurements, which reflect local image structure, consist in the cases considered here of Gaussian derivatives taken at several scales and/or having different derivative orders....

  2. Optical Fiber Pumped High Repetition Rate and High Power Nd:YVO4 Picosecond Regenerative Amplifier

    Directory of Open Access Journals (Sweden)

    Zhen-Ao Bai

    2015-08-01

    Full Text Available We report a stable optical fiber pumped Nd:YVO4 all solid state regenerative amplifier with all fiber picosecond laser as seed source. 888 nm Yb optical fiber lasers was chosen as pump source to reduce quantum defect for improved thermal performance. At the repetition rate of 99.6 kHz, maximum power of 19.63 W with 36 ps pulse duration were achieved when seeded by a 150 mW picosecond oscillator. The wavelength delivered was 1064.07 nm with spectral width of 0.14 nm.

  3. Repetitive DNA Sequences in Wheat and Its Relatives

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xue-yong; LI Da-yong

    2001-01-01

    Repetitive DNA sequences form a large portion of eukaryote genomes. Using wheat ( Triticum )as a model, the classification, features and functions of repetitive DNA sequences in the Tritieeae grass tribe is reviewed as well as the role of these sequences in genome differentiation, control and regulation of homologous chromosome synapsis and pairing. Transposable elements, as an important portion of dispersed repetitives,may play an essential role in gene mutation of the host. Dynamic models for change of copy number and sequences of the repetitive family are also presented after the models of Charlesworth et al. Application of repetitive DNA sequences in the study of evolution, chromosome fingerprinting and marker assisted gene transfer and breeding are described by taking wheat as an example.

  4. Nonword Repetition and Speech Motor Control in Children

    Directory of Open Access Journals (Sweden)

    Christina Reuterskiöld

    2015-01-01

    Full Text Available This study examined how familiarity of word structures influenced articulatory control in children and adolescents during repetition of real words (RWs and nonwords (NWs. A passive reflective marker system was used to track articulator movement. Measures of accuracy were obtained during repetition of RWs and NWs, and kinematic analysis of movement duration and variability was conducted. Participants showed greater consonant and vowel accuracy during RW than NW repetition. Jaw movement duration was longer in NWs compared to RWs across age groups, and younger children produced utterances with longer jaw movement duration compared to older children. Jaw movement variability was consistently greater during repetition of NWs than RWs in both groups of participants. The results indicate that increases in phonological short-term memory demands affect articulator movement. This effect is most pronounced in younger children. A range of skills may develop during childhood, which supports NW repetition skills.

  5. Soliton repetition rate in a silicon-nitride microresonator

    CERN Document Server

    Bao, Chengying; Wang, Cong; Jaramillo-Villegas, Jose A; Leaird, Daniel E; Qi, Minghao; Weiner, Andrew M

    2016-01-01

    The repetition rate of a Kerr comb comprising a single soliton in an anomalous dispersion silicon nitride microcavity is measured as a function of pump frequency tuning. The contributions from the Raman soliton self-frequency shift (SSFS) and from thermal effects are evaluated both experimentally and theoretically; the SSFS is found to dominate the changes in repetition rate. The relationship between the changes in repetition rate and pump frequency detuning is found to be independent of the nonlinearity coefficient and dispersion of the cavity. Modeling of the repetition rate change by using the generalized Lugiato-Lefever equation is discussed; the Kerr shock is found to have only a minor effect on repetition rate for cavity solitons with duration down to ~50 fs.

  6. Transgenerational effects of environmental enrichment on repetitive motor behavior development.

    Science.gov (United States)

    Bechard, Allison R; Lewis, Mark H

    2016-07-01

    The favorable consequences of environmental enrichment (EE) on brain and behavior development are well documented. Much less is known, however, about transgenerational benefits of EE on non-enriched offspring. We explored whether transgenerational effects of EE might extend to the development of repetitive motor behaviors in deer mice. Repetitive motor behaviors are invariant patterns of movement that, across species, can be reduced by EE. We found that EE not only attenuated the development of repetitive behavior in dams, but also in their non-enriched offspring. Moreover, maternal behavior did not seem to mediate the transgenerational effect we found, although repetitive behavior was affected by reproductive experience. These data support a beneficial transgenerational effect of EE on repetitive behavior development and suggest a novel benefit of reproductive experience.

  7. Soliton repetition rate in a silicon-nitride microresonator.

    Science.gov (United States)

    Bao, Chengying; Xuan, Yi; Wang, Cong; Jaramillo-Villegas, Jose A; Leaird, Daniel E; Qi, Minghao; Weiner, Andrew M

    2017-02-15

    The repetition rate of a Kerr comb composed of a single soliton in an anomalous group velocity dispersion silicon-nitride microcavity is measured as a function of pump frequency. By comparing operation in the soliton and non-soliton states, the contributions from the Raman soliton self-frequency shift (SSFS) and the thermal effects are evaluated; the SSFS is found to dominate the changes in the repetition rate, similar to silica cavities. The relationship between the changes in the repetition rate and the pump frequency detuning is found to be independent of the nonlinearity coefficient and dispersion of the cavity. Modeling of the repetition rate change by using the generalized Lugiato-Lefever equation is discussed; the Kerr shock is found to have only a minor effect on repetition rate for cavity solitons with duration down to ∼50  fs.

  8. Self-controlled KR schedules: does repetition order matter?

    Science.gov (United States)

    Patterson, Jae T; Carter, Michael J; Hansen, Steve

    2013-08-01

    The impact of an experimenter-defined repetition schedule on the utility of a self-controlled KR context during motor skill acquisition was examined. Participants were required to learn three novel spatial-temporal tasks in either a random or blocked repetition schedule with or without the opportunity to control their KR. Results from the retention period showed that participants provided control over their KR schedule in a random repetition schedule demonstrated superior learning. However, performance measures from the transfer test showed that, independent of repetition schedule, learners provided the opportunity to control their KR schedule demonstrated superior transfer performance compared to their yoked counterparts. The dissociated impact of repetition schedule and self-controlled KR schedules on retention and transfer is discussed.

  9. Impaired speech repetition and left parietal lobe damage.

    Science.gov (United States)

    Fridriksson, Julius; Kjartansson, Olafur; Morgan, Paul S; Hjaltason, Haukur; Magnusdottir, Sigridur; Bonilha, Leonardo; Rorden, Christopher

    2010-08-18

    Patients with left hemisphere damage and concomitant aphasia usually have difficulty repeating others' speech. Although impaired speech repetition, the primary symptom of conduction aphasia, has been associated with involvement of the left arcuate fasciculus, its specific lesion correlate remains elusive. This research examined speech repetition among 45 stroke patients who underwent aphasia testing and MRI examination. Based on lesion-behavior mapping, the primary structural damage most closely associated with impaired speech repetition was found in the posterior portion of the left arcuate fasciculus. However, perfusion-weighted MRI revealed that tissue dysfunction, in the form of either frank damage or hypoperfusion, to the left inferior parietal lobe, rather than the underlying white matter, was associated with impaired speech repetition. This latter result suggests that integrity of the left inferior parietal lobe is important for speech repetition and, as importantly, highlights the importance of examining cerebral perfusion for the purpose of lesion-behavior mapping in acute stroke.

  10. Repetition and Emotive Communication in Music Versus Speech

    Directory of Open Access Journals (Sweden)

    Elizabeth Hellmuth eMargulis

    2013-04-01

    Full Text Available Music and speech are often placed alongside one another as comparative cases. Their relative overlaps and disassociations have been well explored (e.g. Patel, 2010. But one key attribute distinguishing these two domains has often been overlooked: the greater preponderance of repetition in music in comparison to speech. Recent fMRI studies have shown that familiarity – achieved through repetition – is a critical component of emotional engagement with music (Pereira et al., 2011. If repetition is fundamental to emotional responses to music, and repetition is a key distinguisher between the domains of music and speech, then close examination of the phenomenon of repetition might help clarify the ways that music elicits emotion differently than speech.

  11. Physical Characteristics Underpinning Repetitive Lunging in Fencing.

    Science.gov (United States)

    Turner, Anthony N; Marshall, Geoff; Phillips, James; Noto, Angelo; Buttigieg, Conor; Chavda, Shyam; Downing, William; Atlay, Nathan; Dimitriou, Lygeri; Kilduff, Laim

    2016-11-01

    Turner, AN, Marshall, G, Phillips, J, Noto, A, Buttigieg, C, Chavda, S, Downing, W, Atlay, N, Dimitriou, L, and Kilduff, L. Physical characteristics underpinning repetitive lunging in fencing. J Strength Cond Res 30(11): 3134-3139, 2016-Given the repetitive demand to execute lunging and changes in direction within fencing, the ability to sustain these at maximal capacity is fundamental to performance. The aim of this study was threefold. First, to provide normative values for this variable referred to as repeat lunge ability (RLA) and second to identify the physical characteristics that underpin it. Third, was to establish if a cause and effect relationship existed by training the associated characteristics. Assessment of lower-body power, reactive strength, speed, change of direction speed (CODS), and a sport-specific RLA were conducted on senior and junior elite male fencers (n = 36). Fencers were on average (±SD) 18.9 ± 3.2 years of age, 174.35 ± 10.42 cm tall, 70.67 ± 7.35 kg in mass, and 8.5 ± 4.2 years fencing experience. The RLA test had average work times of 16.03 ± 1.40 seconds and demonstrated "large" to "very large" associations with all tested variables, but in particular CODS (r = 0.70) and standing broad jump (SBJ; r = -0.68). Through linear regression analysis, these also provided a 2-predictor model accounting for 61% of the common variance associated with RLA. A cause and effect relationship with SBJ and CODS was confirmed by the training group, where RLA performance in these fencers improved from 15.80 ± 1.07 to 14.90 ± 0.86 seconds, with the magnitude of change reported as "moderate" (effect size (ES) = 0.93). Concurrent improvements were also noted in both SBJ (216.86 ± 17.15 vs. 221.71 ± 17.59 cm) and CODS (4.44 ± 0.29 vs. 4.31 ± 0.09 seconds) and while differences were only significant in SBJ, magnitudes of change were classed as "small" (ES = 0.28) and "moderate" (ES = 0.61), respectively. In conclusion, to improve RLA strength

  12. Economics and Maximum Entropy Production

    Science.gov (United States)

    Lorenz, R. D.

    2003-04-01

    Price differentials, sales volume and profit can be seen as analogues of temperature difference, heat flow and work or entropy production in the climate system. One aspect in which economic systems exhibit more clarity than the climate is that the empirical and/or statistical mechanical tendency for systems to seek a maximum in production is very evident in economics, in that the profit motive is very clear. Noting the common link between 1/f noise, power laws and Self-Organized Criticality with Maximum Entropy Production, the power law fluctuations in security and commodity prices is not inconsistent with the analogy. There is an additional thermodynamic analogy, in that scarcity is valued. A commodity concentrated among a few traders is valued highly by the many who do not have it. The market therefore encourages via prices the spreading of those goods among a wider group, just as heat tends to diffuse, increasing entropy. I explore some empirical price-volume relationships of metals and meteorites in this context.

  13. Repetitive differential finger motion increases shear strain between the flexor tendon and subsynovial connective tissue.

    Science.gov (United States)

    Tat, Jimmy; Kociolek, Aaron M; Keir, Peter J

    2013-10-01

    Non-inflammatory fibrosis and thickening of the subsynovial connective tissue (SSCT) are characteristic in carpal tunnel syndrome (CTS) patients. These pathological changes have been linked to repetitive hand tasks that create shear forces between the flexor tendons and SSCT. We measured the relative motion of the flexor digitorum superficialis tendon and SSCT during two repetitive finger tasks using color Doppler ultrasound. Twelve participants performed flexion-extension cycles for 30 min with the long finger alone (differential movement) and with all four fingers together (concurrent movement). Shear strain index (SSI, a relative measure of excursion in flexion and extension) and maximum velocity ratio (MVR, the ratio of SSCT versus tendon during flexion and extension) were used to represent shear. A linear effect of exertion time was significant and corresponded with larger tendon shear in differential motion. The flexion SSI increased 20.4% from the first to the 30th minute, while MVR decreased 8.9% in flexion and 8.7% in extension. No significant changes were found during concurrent motion. These results suggest that exposure to repetitive differential finger tasks may increase the risk of shear injury in the carpal tunnel. Copyright © 2013 Orthopaedic Research Society.

  14. Investigation of Fe:ZnSe laser in pulsed and repetitively pulsed regimes

    Energy Technology Data Exchange (ETDEWEB)

    Velikanov, S D; Zaretskiy, N A; Zotov, E A; Maneshkin, A A; Chuvatkin, R S; Yutkin, I M [Russian Federal Nuclear Center ' All-Russian Research Institute of Experimental Physics' , Sarov, Nizhnii Novgorod region (Russian Federation); Kozlovsky, V I; Korostelin, Yu V; Krokhin, O N; Podmar' kov, Yu P; Savinova, S A; Skasyrsky, Ya K; Frolov, M P [P N Lebedev Physics Institute, Russian Academy of Sciences, Moscow (Russian Federation)

    2015-01-31

    The characteristics of a Fe:ZnSe laser pumped by a single-pulse free-running Er : YAG laser and a repetitively pulsed HF laser are presented. An output energy of 4.9 J is achieved in the case of liquid-nitrogen cooling of the Fe{sup 2+}:ZnSe active laser element longitudinally pumped by an Er:YAG laser with a pulse duration of 1 ms and an energy up to 15 J. The laser efficiency with respect to the absorbed energy is 47%. The output pulse energy at room temperature is 53 mJ. The decrease in the output energy is explained by a strong temperature dependence of the upper laser level lifetime and by pulsed heating of the active element. The temperature dependence of the upper laser level lifetime is used to determine the pump parameters needed to achieve high pulse energies at room temperature. Stable repetitively-pulsed operation of the Fe{sup 2+}:ZnSe laser at room temperature with an average power of 2.4 W and a maximum pulse energy of 14 mJ is achieved upon pumping by a 1-s train of 100-ns HF laser pulses with a repetition rate of 200 Hz. (lasers)

  15. Investigation of Fe:ZnSe laser in pulsed and repetitively pulsed regimes

    Science.gov (United States)

    Velikanov, S. D.; Zaretskiy, N. A.; Zotov, E. A.; Kozlovsky, V. I.; Korostelin, Yu V.; Krokhin, O. N.; Maneshkin, A. A.; Podmar'kov, Yu P.; Savinova, S. A.; Skasyrsky, Ya K.; Frolov, M. P.; Chuvatkin, R. S.; Yutkin, I. M.

    2015-01-01

    The characteristics of a Fe:ZnSe laser pumped by a single-pulse free-running Er : YAG laser and a repetitively pulsed HF laser are presented. An output energy of 4.9 J is achieved in the case of liquid-nitrogen cooling of the Fe2+:ZnSe active laser element longitudinally pumped by an Er:YAG laser with a pulse duration of 1 ms and an energy up to 15 J. The laser efficiency with respect to the absorbed energy is 47%. The output pulse energy at room temperature is 53 mJ. The decrease in the output energy is explained by a strong temperature dependence of the upper laser level lifetime and by pulsed heating of the active element. The temperature dependence of the upper laser level lifetime is used to determine the pump parameters needed to achieve high pulse energies at room temperature. Stable repetitively-pulsed operation of the Fe2+:ZnSe laser at room temperature with an average power of 2.4 W and a maximum pulse energy of 14 mJ is achieved upon pumping by a 1-s train of 100-ns HF laser pulses with a repetition rate of 200 Hz.

  16. Generation of low-timing-jitter femtosecond pulse trains with 2 GHz repetition rate via external repetition rate multiplication.

    Science.gov (United States)

    Chen, Jian; Sickler, Jason W; Fendel, Peter; Ippen, Erich P; Kärtner, Franz X; Wilken, Tobias; Holzwarth, Ronald; Hänsch, Theodor W

    2008-05-01

    Generation of low-timing-jitter 150 fs pulse trains at 1560 nm with 2 GHz repetition rate is demonstrated by locking a 200 MHz fundamental polarization additive-pulse mode-locked erbium fiber laser to high-finesse external Fabry-Perot cavities. The timing jitter and relative intensity noise of the repetition-rate multiplied pulse train are investigated.

  17. [Rehabilitation Using Repetitive Transcranial Magnetic Stimulation].

    Science.gov (United States)

    Takeuchi, Naoyuki; Izumi, Shin-Ichi

    2017-03-01

    Various novel stroke rehabilitative methods have been developed based on findings in basic science and clinical research. Recently, many reports have shown that repetitive transcranial magnetic stimulation (rTMS) improves function in stroke patients by altering the excitability of the human cortex. The interhemispheric competition model proposes that deficits in stroke patients are due to reduced output from the affected hemisphere and excessive interhemispheric inhibition from the unaffected hemisphere to the affected hemisphere. The interhemispheric competition model indicates that improvement in deficits can be achieved either by increasing the excitability of the affected hemisphere using excitatory rTMS or by decreasing the excitability of the unaffected hemisphere using inhibitory rTMS. Recovery after stroke is related to neural plasticity, which involves developing new neural connections, acquiring new functions, and compensating for impairments. Artificially modulating the neural network by rTMS may induce a more suitable environment for use-dependent plasticity and also may interfere with maladaptive neural activation, which weakens function and limits recovery. There is potential, therefore, for rTMS to be used as an adjuvant therapy for developed neurorehabilitation techniques in stroke patients.

  18. SI Engine with repetitive NS spark plug

    Science.gov (United States)

    Pancheshniy, Sergey; Nikipelov, Andrey; Anokhin, Eugeny; Starikovskiy, Andrey; Laplase Team; Mipt Team; Pu Team

    2013-09-01

    Now de-facto the only technology for fuel-air mixtures ignition in IC engines exists. It is a spark discharge of millisecond duration in a short discharge gap. The reason for such a small variety of methods of ignition initiation is very specific conditions of the engine operation. First, it is very high-pressure of fuel-air mixture - from 5-7 atmospheres in old-type engines and up to 40-50 atmospheres on the operating mode of HCCI. Second, it is a very wide range of variation of the oxidizer/fuel ratio in the mixture - from almost stoichiometric (0.8-0.9) at full load to very lean (φ = 0.3-0.5) mixtures at idle and/or economical cruising mode. Third, the high velocity of the gas in the combustion chamber (up to 30-50 m/s) resulting in a rapid compression of swirling inlet flow. The paper presents the results of tests of distributed spark ignition system powered by repetitive pulse nanosecond discharge. Dynamic pressure measurements show the increased pressure and frequency stability for nanosecond excitation in comparison with the standard spark plug. Excitation by single nanosecond high-voltage pulse and short train of pulses was examined. In all regimes the nanosecond pulsed excitation demonstrate a better performance.

  19. Repetitive transcranial magnetic stimulation and drug addiction.

    Science.gov (United States)

    Barr, Mera S; Farzan, Faranak; Wing, Victoria C; George, Tony P; Fitzgerald, Paul B; Daskalakis, Zafiris J

    2011-10-01

    Repetitive transcranial magnetic stimulation (rTMS) is a non-invasive brain stimulation technique that is now being tested for its ability to treat addiction. This review discusses current research approaches and results of studies which measured the therapeutic use of rTMS to treat tobacco, alcohol and illicit drug addiction. The research in this area is limited and therefore all studies evaluating the therapeutic use of rTMS in tobacco, alcohol or illicit drug addiction were retained including case studies through NCBI PubMed ( http://www.ncbi.nlm.nih.gov ) and manual searches. A total of eight studies were identified that examined the ability of rTMS to treat tobacco, alcohol and cocaine addiction. The results of this review indicate that rTMS is effective in reducing the level of cravings for smoking, alcohol, and cocaine when applied at high frequencies to the dorsolateral prefrontal cortex (DLPFC). Furthermore, these studies suggest that repeated sessions of high frequency rTMS over the DLPFC may be most effective in reducing the level of smoking and alcohol consumption. Although work in this area is limited, this review indicates that rTMS is a promising modality for treating drug addiction.

  20. Development of a repetitive compact torus injector

    Science.gov (United States)

    Onchi, Takumi; McColl, David; Dreval, Mykola; Rohollahi, Akbar; Xiao, Chijin; Hirose, Akira; Zushi, Hideki

    2013-10-01

    A system for Repetitive Compact Torus Injection (RCTI) has been developed at the University of Saskatchewan. CTI is a promising fuelling technology to directly fuel the core region of tokamak reactors. In addition to fuelling, CTI has also the potential for (a) optimization of density profile and thus bootstrap current and (b) momentum injection. For steady-state reactor operation, RCTI is necessary. The approach to RCTI is to charge a storage capacitor bank with a large capacitance and quickly charge the CT capacitor bank through a stack of integrated-gate bipolar transistors (IGBTs). When the CT bank is fully charged, the IGBT stack will be turned off to isolate banks, and CT formation/acceleration sequence will start. After formation of each CT, the fast bank will be replenished and a new CT will be formed and accelerated. Circuits for the formation and the acceleration in University of Saskatchewan CT Injector (USCTI) have been modified. Three CT shots at 10 Hz or eight shots at 1.7 Hz have been achieved. This work has been sponsored by the CRC and NSERC, Canada.

  1. Objects of maximum electromagnetic chirality

    CERN Document Server

    Fernandez-Corbaton, Ivan

    2015-01-01

    We introduce a definition of the electromagnetic chirality of an object and show that it has an upper bound. The upper bound is attained if and only if the object is transparent for fields of one handedness (helicity). Additionally, electromagnetic duality symmetry, i.e. helicity preservation upon scattering, turns out to be a necessary condition for reciprocal scatterers to attain the upper bound. We use these results to provide requirements for the design of such extremal scatterers. The requirements can be formulated as constraints on the polarizability tensors for dipolar scatterers or as material constitutive relations. We also outline two applications for objects of maximum electromagnetic chirality: A twofold resonantly enhanced and background free circular dichroism measurement setup, and angle independent helicity filtering glasses.

  2. Maximum mutual information regularized classification

    KAUST Repository

    Wang, Jim Jing-Yan

    2014-09-07

    In this paper, a novel pattern classification approach is proposed by regularizing the classifier learning to maximize mutual information between the classification response and the true class label. We argue that, with the learned classifier, the uncertainty of the true class label of a data sample should be reduced by knowing its classification response as much as possible. The reduced uncertainty is measured by the mutual information between the classification response and the true class label. To this end, when learning a linear classifier, we propose to maximize the mutual information between classification responses and true class labels of training samples, besides minimizing the classification error and reducing the classifier complexity. An objective function is constructed by modeling mutual information with entropy estimation, and it is optimized by a gradient descend method in an iterative algorithm. Experiments on two real world pattern classification problems show the significant improvements achieved by maximum mutual information regularization.

  3. The strong maximum principle revisited

    Science.gov (United States)

    Pucci, Patrizia; Serrin, James

    In this paper we first present the classical maximum principle due to E. Hopf, together with an extended commentary and discussion of Hopf's paper. We emphasize the comparison technique invented by Hopf to prove this principle, which has since become a main mathematical tool for the study of second order elliptic partial differential equations and has generated an enormous number of important applications. While Hopf's principle is generally understood to apply to linear equations, it is in fact also crucial in nonlinear theories, such as those under consideration here. In particular, we shall treat and discuss recent generalizations of the strong maximum principle, and also the compact support principle, for the case of singular quasilinear elliptic differential inequalities, under generally weak assumptions on the quasilinear operators and the nonlinearities involved. Our principal interest is in necessary and sufficient conditions for the validity of both principles; in exposing and simplifying earlier proofs of corresponding results; and in extending the conclusions to wider classes of singular operators than previously considered. The results have unexpected ramifications for other problems, as will develop from the exposition, e.g. two point boundary value problems for singular quasilinear ordinary differential equations (Sections 3 and 4); the exterior Dirichlet boundary value problem (Section 5); the existence of dead cores and compact support solutions, i.e. dead cores at infinity (Section 7); Euler-Lagrange inequalities on a Riemannian manifold (Section 9); comparison and uniqueness theorems for solutions of singular quasilinear differential inequalities (Section 10). The case of p-regular elliptic inequalities is briefly considered in Section 11.

  4. Repetitive energy transfer from an inductive energy store

    Energy Technology Data Exchange (ETDEWEB)

    Honig, E.M.

    1984-01-01

    The theoretical and experimental results of a research program aimed at finding practical ways to transfer energy repetitively from an inductive energy store to various loads are discussed. The objectives were to investigate and develop the high power opening switches and transfer circuits needed to enable high-repetition-rate operation of such systems, including a feasibility demonstration at a current level near 10 kA and a pulse repetition rate of 1-10 kpps with a 1-ohm load. The requirements of nonlinear, time-varying loads, such as the railgun electromagnetic launcher, were also addressed. Energy storage capability is needed for proper power conditioning in systems where the duty factor of the output pulse train is low. Inductive energy storage is attractive because it has both a high energy storage density and a fast discharge capability. By producing a pulse train with a peak power of 75 MW at a pulse repetition rate of 5 kpps in a one-ohm load system, this research program was the first to demonstrate fully-controlled, high-power, high-repetition-rate operation of an inductive energy storage and transfer system with survivable switches. Success was made possible by using triggered vacuum gap switches as repetitive, current-zero opening switches and developing several new repetitive transfer circuits using the counterpulse technique.

  5. Skill learning in mirror reading: how repetition determines acquisition.

    Science.gov (United States)

    Ofen-Noy, N; Dudai, Y; Karni, A

    2003-07-01

    Practice makes perfect, but the role of repetitions in skill learning is not yet fully understood. For example, given a similar number of trials on a given task, it is debated whether repeating and non-repeating items are learned by the same neural process. When one is given training with both types of items--does one learn two separate skills, or only one? Here we show, using a mirror reading task, that practice trials with trial-unique words, and practice trials with repeated words, count towards learning to a different degree. There was no interaction between the time-course of learning repeated and unique words even within the same individuals given mixed training. While repeated words were learned faster than unique words, the repetitions-dependent gains diminished with training beyond a small number of repetitions. Moreover, the gains in performance could not be accounted for solely by the number of repetitions, as assumed by power-law models of learning; rather, the passage of time was a critical factor. Finally, our results suggest that although both repeated and new words were learned by both declarative and procedural memory mechanisms, even a single repetition of specific words could lead to the establishment of a selective differential representation in memory. The results are compatible with the notion of a repetition-sensitive process, triggered by specific repeating events. This 'repetition counter' may be a critical trigger for the effective formation of procedural as well as some type of declarative memory.

  6. Directed PCR-free engineering of highly repetitive DNA sequences

    Directory of Open Access Journals (Sweden)

    Preissler Steffen

    2011-09-01

    Full Text Available Abstract Background Highly repetitive nucleotide sequences are commonly found in nature e.g. in telomeres, microsatellite DNA, polyadenine (poly(A tails of eukaryotic messenger RNA as well as in several inherited human disorders linked to trinucleotide repeat expansions in the genome. Therefore, studying repetitive sequences is of biological, biotechnological and medical relevance. However, cloning of such repetitive DNA sequences is challenging because specific PCR-based amplification is hampered by the lack of unique primer binding sites resulting in unspecific products. Results For the PCR-free generation of repetitive DNA sequences we used antiparallel oligonucleotides flanked by restriction sites of Type IIS endonucleases. The arrangement of recognition sites allowed for stepwise and seamless elongation of repetitive sequences. This facilitated the assembly of repetitive DNA segments and open reading frames encoding polypeptides with periodic amino acid sequences of any desired length. By this strategy we cloned a series of polyglutamine encoding sequences as well as highly repetitive polyadenine tracts. Such repetitive sequences can be used for diverse biotechnological applications. As an example, the polyglutamine sequences were expressed as His6-SUMO fusion proteins in Escherichia coli cells to study their aggregation behavior in vitro. The His6-SUMO moiety enabled affinity purification of the polyglutamine proteins, increased their solubility, and allowed controlled induction of the aggregation process. We successfully purified the fusions proteins and provide an example for their applicability in filter retardation assays. Conclusion Our seamless cloning strategy is PCR-free and allows the directed and efficient generation of highly repetitive DNA sequences of defined lengths by simple standard cloning procedures.

  7. Comparitive Assessment of Isokinetic and Pneumatic Lower Limb Strength in Functionally-Limited Elderly Subjects

    Science.gov (United States)

    The purpose of this study was to investigate the relationship between isokinetic and pneumatic knee extensor strength in functionally-limited elders and to compare the respective changes in knee extensor peak torque and one repetition maximum strength (1RM) after a randomized controlled progressive ...

  8. High-intensity resistance and cardiovascular training improve physical capacity in cancer patients undergoing chemotherapy

    DEFF Research Database (Denmark)

    Quist, Morten; Rørth, Mikael Rahbek; Zacho, Morten

    2006-01-01

    and 65 years of age (mean age 42.8) participated in a 9-h weekly training program over 6 weeks. The intervention involved physical exercise, relaxation, massage, and body-awareness training. Physical capacity (one-repetition maximum tests (1RM), VO2max) and body composition (weight, skin-fold) were...

  9. Comparison of Lower Extremity Strength, Power and Muscle Area between Healthy Subjects and Mobility-Limited Elders

    Science.gov (United States)

    This study compared muscle strength, power and cross sectional area (CSA) in healthy middle-aged adults (mean age: 47.3 +/- 5 yrs, n = 26), healthy older adults (73.8 +/- 4 yrs, n = 21), and older adults with mobility impairments (77.1 +/- 5 yrs, n = 21). One repetition maximum strength (1RM) and pe...

  10. Repetition-based Interactive Facade Modeling

    KAUST Repository

    AlHalawani, Sawsan

    2012-07-01

    Modeling and reconstruction of urban environments has gained researchers attention throughout the past few years. It spreads in a variety of directions across multiple disciplines such as image processing, computer graphics and computer vision as well as in architecture, geoscience and remote sensing. Having a virtual world of our real cities is very attractive in various directions such as entertainment, engineering, governments among many others. In this thesis, we address the problem of processing a single fa cade image to acquire useful information that can be utilized to manipulate the fa cade and generate variations of fa cade images which can be later used for buildings\\' texturing. Typical fa cade structures exhibit a rectilinear distribution where in windows and other elements are organized in a grid of horizontal and vertical repetitions of similar patterns. In the firt part of this thesis, we propose an efficient algorithm that exploits information obtained from a single image to identify the distribution grid of the dominant elements i.e. windows. This detection method is initially assisted with the user marking the dominant window followed by an automatic process for identifying its repeated instances which are used to define the structure grid. Given the distribution grid, we allow the user to interactively manipulate the fa cade by adding, deleting, resizing or repositioning the windows in order to generate new fa cade structures. Having the utility for the interactive fa cade is very valuable to create fa cade variations and generate new textures for building models. Ultimately, there is a wide range of interesting possibilities of interactions to be explored.

  11. Understanding communicative actions: a repetitive TMS study.

    Science.gov (United States)

    Stolk, Arjen; Noordzij, Matthijs L; Volman, Inge; Verhagen, Lennart; Overeem, Sebastiaan; van Elswijk, Gijs; Bloem, Bas; Hagoort, Peter; Toni, Ivan

    2014-02-01

    Despite the ambiguity inherent in human communication, people are remarkably efficient in establishing mutual understanding. Studying how people communicate in novel settings provides a window into the mechanisms supporting the human competence to rapidly generate and understand novel shared symbols, a fundamental property of human communication. Previous work indicates that the right posterior superior temporal sulcus (pSTS) is involved when people understand the intended meaning of novel communicative actions. Here, we set out to test whether normal functioning of this cerebral structure is required for understanding novel communicative actions using inhibitory low-frequency repetitive transcranial magnetic stimulation (rTMS). A factorial experimental design contrasted two tightly matched stimulation sites (right pSTS vs left MT+, i.e., a contiguous homotopic task-relevant region) and tasks (a communicative task vs a visual tracking task that used the same sequences of stimuli). Overall task performance was not affected by rTMS, whereas changes in task performance over time were disrupted according to TMS site and task combinations. Namely, rTMS over pSTS led to a diminished ability to improve action understanding on the basis of recent communicative history, while rTMS over MT+ perturbed improvement in visual tracking over trials. These findings qualify the contributions of the right pSTS to human communicative abilities, showing that this region might be necessary for incorporating previous knowledge, accumulated during interactions with a communicative partner, to constrain the inferential process that leads to action understanding. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Epithelial topography for repetitive tooth formation

    Directory of Open Access Journals (Sweden)

    Marcia Gaete

    2015-12-01

    Full Text Available During the formation of repetitive ectodermally derived organs such as mammary glands, lateral line and teeth, the tissue primordium iteratively initiates new structures. In the case of successional molar development, new teeth appear sequentially in the posterior region of the jaw from Sox2+ cells in association with the posterior aspect of a pre-existing tooth. The sequence of molar development is well known, however, the epithelial topography involved in the formation of a new tooth is unclear. Here, we have examined the morphology of the molar dental epithelium and its development at different stages in the mouse in vivo and in molar explants. Using regional lineage tracing we show that within the posterior tail of the first molar the primordium for the second and third molar are organized in a row, with the tail remaining in connection with the surface, where a furrow is observed. The morphology and Sox2 expression of the tail retains characteristics reminiscent of the earlier stages of tooth development, such that position along the A-P axes of the tail correlates with different temporal stages. Sox9, a stem/progenitor cell marker in other organs, is expressed mainly in the suprabasal epithelium complementary with Sox2 expression. This Sox2 and Sox9 expressing molar tail contains actively proliferating cells with mitosis following an apico-basal direction. Snail2, a transcription factor implicated in cell migration, is expressed at high levels in the tip of the molar tail while E-cadherin and laminin are decreased. In conclusion, our studies propose a model in which the epithelium of the molar tail can grow by posterior movement of epithelial cells followed by infolding and stratification involving a population of Sox2+/Sox9+ cells.

  13. Repetitive transcranial magnetic stimulation in psychiatry

    Directory of Open Access Journals (Sweden)

    Biswa Ranjan Mishra

    2011-01-01

    Full Text Available Repetitive transcranial magnetic stimulation (rTMS is a non-invasive and relatively painless tool that has been used to study various cognitive functions as well as to understand the brain-behavior relationship in normal individuals as well as in those with various neuropsychiatric disorders. It has also been used as a therapeutic tool in various neuropsychiatric disorders because of its ability to specifically modulate distinct brain areas. Studies have shown that repeated stimulation at low frequency produces long-lasting inhibition, which is called as long-term depression, whereas repeated high-frequency stimulation can produce excitation through long-term potentiation. This paper reviews the current status of rTMS as an investigative and therapeutic modality in various neuropsychiatric disorders. It has been used to study the cortical and subcortical functions, neural plasticity and brain mapping in normal individuals and in various neuropsychiatric disorders. rTMS has been most promising in the treatment of depression, with an overall milder adverse effect profile compared with electroconvulsive therapy. In other neuropsychiatric disorders such as schizophrenia, mania, epilepsy and substance abuse, it has been found to be useful, although further studies are required to establish therapeutic efficacy. It appears to be ineffective in the treatment of obsessive compulsive disorder. There is a paucity of studies of efficacy and safety of rTMS in pediatric and geriatric population. Although it appears safe, further research is required to optimize its efficacy and reduce the side-effects. Magnetic seizure therapy, which involves producing seizures akin to electroconvulsive therapy, appears to be of comparable efficacy in the treatment of depression with less cognitive adverse effects.

  14. Clinical application of repetitive transcranial magnetic stimulation in stroke rehabilitation☆

    Science.gov (United States)

    Shin, Joonho; Yang, EunJoo; Cho, KyeHee; Barcenas, Carmelo L; Kim, Woo Jin; Min, Yusun; Paik, Nam-Jong

    2012-01-01

    Proper stimulation to affected cerebral hemisphere would promote the functional recovery of patients with stroke. Effects of repetitive transcranial magnetic stimulation on cortical excitability can be can be altered by the stimulation frequency, intensity and duration. There has been no consistent recognition regarding the best stimulation frequency and intensity. This study reviews the intervention effects of repetitive transcranial stimulation on motor impairment, dysphagia, visuospatial neglect and aphasia, and summarizes the stimulation frequency, intensity and area for repetitive transcranial magnetic stimulation to yield the best therapeutic effects. PMID:25745455

  15. Clinical application of repetitive transcranial magnetic stimulation in stroke rehabilitation

    Institute of Scientific and Technical Information of China (English)

    Joonho Shin; EunJoo Yang; KyeHee Cho; Carmelo L Barcenas; Woo Jin Kim; Yusun Min; Nam-Jong Paik

    2012-01-01

    Proper stimulation to affected cerebral hemisphere would promote the functional recovery of patients with stroke. Effects of repetitive transcranial magnetic stimulation on cortical excitability can be can be altered by the stimulation frequency, intensity and duration. There has been no consistent recognition regarding the best stimulation frequency and intensity. This study reviews the intervention effects of repetitive transcranial stimulation on motor impairment, dysphagia, visuospatial neglect and aphasia, and summarizes the stimulation frequency, intensity and area for repetitive transcranial magnetic stimulation to yield the best therapeutic effects.

  16. The effect of posture and repetition on urodynamic parameters: A prospective randomized study

    Science.gov (United States)

    Jeon, Ho Joon; Choo, Min Soo

    2017-01-01

    Purpose To evaluate the effect of posture and repetition of filling cystometry on urodynamic parameters. Materials and Methods Seventy-one men with benign prostatic hyperplasia participated in a urodynamic study between September 2015 and August 2016 and were randomly assigned to a supine to supine (group SS, n=16), erect to erect (group EE, n=16), supine to erect (group SE, n=19) or erect to supine (group ES, n=20) group. The patients underwent filling cystometry twice. We evaluated the effect of posture and the effect of repetition on filling cystometric parameters. We also evaluated the correlation between overactive bladder (OAB) and detrusor overactivity (DO) and between maximum voided volume (MVV) and maximum cystometric capacity (MCC) for each posture and filling cystometry time. Results There was a decrease in bladder sensation and occurrence of DO, and an increase in bladder compliance and MCC in the supine posture group compared to that in the erect posture group. A more significant decrease in bladder sensation and occurrence of DO as well as an increase in MCC was seen during the second filling cystometry than the first one. The supine posture during first filling cystometry showed a better correlation between OAB and DO and between MVV and MCC than erect posture. Conclusions There were clear effects of posture and filling cystometry repetition on urodynamic parameters. The supine posture and repeated filling cystometry caused the bladder to be less sensitive and less overactive. The supine posture showed a better correlation to OAB symptoms than erect posture during first filling cystometry. PMID:28097266

  17. Maximum entropy production in daisyworld

    Science.gov (United States)

    Maunu, Haley A.; Knuth, Kevin H.

    2012-05-01

    Daisyworld was first introduced in 1983 by Watson and Lovelock as a model that illustrates how life can influence a planet's climate. These models typically involve modeling a planetary surface on which black and white daisies can grow thus influencing the local surface albedo and therefore also the temperature distribution. Since then, variations of daisyworld have been applied to study problems ranging from ecological systems to global climate. Much of the interest in daisyworld models is due to the fact that they enable one to study self-regulating systems. These models are nonlinear, and as such they exhibit sensitive dependence on initial conditions, and depending on the specifics of the model they can also exhibit feedback loops, oscillations, and chaotic behavior. Many daisyworld models are thermodynamic in nature in that they rely on heat flux and temperature gradients. However, what is not well-known is whether, or even why, a daisyworld model might settle into a maximum entropy production (MEP) state. With the aim to better understand these systems, this paper will discuss what is known about the role of MEP in daisyworld models.

  18. Maximum stellar iron core mass

    Indian Academy of Sciences (India)

    F W Giacobbe

    2003-03-01

    An analytical method of estimating the mass of a stellar iron core, just prior to core collapse, is described in this paper. The method employed depends, in part, upon an estimate of the true relativistic mass increase experienced by electrons within a highly compressed iron core, just prior to core collapse, and is significantly different from a more typical Chandrasekhar mass limit approach. This technique produced a maximum stellar iron core mass value of 2.69 × 1030 kg (1.35 solar masses). This mass value is very near to the typical mass values found for neutron stars in a recent survey of actual neutron star masses. Although slightly lower and higher neutron star masses may also be found, lower mass neutron stars are believed to be formed as a result of enhanced iron core compression due to the weight of non-ferrous matter overlying the iron cores within large stars. And, higher mass neutron stars are likely to be formed as a result of fallback or accretion of additional matter after an initial collapse event involving an iron core having a mass no greater than 2.69 × 1030 kg.

  19. Maximum Matchings via Glauber Dynamics

    CERN Document Server

    Jindal, Anant; Pal, Manjish

    2011-01-01

    In this paper we study the classic problem of computing a maximum cardinality matching in general graphs $G = (V, E)$. The best known algorithm for this problem till date runs in $O(m \\sqrt{n})$ time due to Micali and Vazirani \\cite{MV80}. Even for general bipartite graphs this is the best known running time (the algorithm of Karp and Hopcroft \\cite{HK73} also achieves this bound). For regular bipartite graphs one can achieve an $O(m)$ time algorithm which, following a series of papers, has been recently improved to $O(n \\log n)$ by Goel, Kapralov and Khanna (STOC 2010) \\cite{GKK10}. In this paper we present a randomized algorithm based on the Markov Chain Monte Carlo paradigm which runs in $O(m \\log^2 n)$ time, thereby obtaining a significant improvement over \\cite{MV80}. We use a Markov chain similar to the \\emph{hard-core model} for Glauber Dynamics with \\emph{fugacity} parameter $\\lambda$, which is used to sample independent sets in a graph from the Gibbs Distribution \\cite{V99}, to design a faster algori...

  20. 76 FR 1504 - Pipeline Safety: Establishing Maximum Allowable Operating Pressure or Maximum Operating Pressure...

    Science.gov (United States)

    2011-01-10

    ...: Establishing Maximum Allowable Operating Pressure or Maximum Operating Pressure Using Record Evidence, and... facilities of their responsibilities, under Federal integrity management (IM) regulations, to perform... system, especially when calculating Maximum Allowable Operating Pressure (MAOP) or Maximum Operating...

  1. Shortening of subjective visual intervals followed by repetitive stimulation.

    Directory of Open Access Journals (Sweden)

    Fuminori Ono

    Full Text Available Our previous research demonstrated that repetitive tone stimulation shortened the perceived duration of the preceding auditory time interval. In this study, we examined whether repetitive visual stimulation influences the perception of preceding visual time intervals. Results showed that a time interval followed by a high-frequency visual flicker was perceived as shorter than that followed by a low-frequency visual flicker. The perceived duration decreased as the frequency of the visual flicker increased. The visual flicker presented in one hemifield shortened the apparent time interval in the other hemifield. A final experiment showed that repetitive tone stimulation also shortened the perceived duration of preceding visual time intervals. We concluded that visual flicker shortened the perceived duration of preceding visual time intervals in the same way as repetitive auditory stimulation shortened the subjective duration of preceding tones.

  2. The relationship between task repetition and language proficiency

    Directory of Open Access Journals (Sweden)

    Ahmad Mojavezi

    2014-01-01

    Full Text Available Task repetition is now considered as an important task-based implementation variable which can affect complexity, accuracy, and fluency of L2 speech. However, in order to move towards theorizing the role of task repetition in second language acquisition, it is necessary that individual variables be taken into account. The present study aimed to investigate the way task repetition correlates with language proficiency and the differential effects that task repetition might have on the complexity, accuracy, and fluency of L2 learners with different levels of proficiency. Fifty language learners of different levels of proficiency, selected from two different language centers, participated in this study. They were asked to perform an oral narrative task twice with a one-week interval. Results revealed that, compared to the participants with lower L2 proficiency, participants with higher levels of L2 proficiency produced more complex, accurate, and fluent speech on the second encounter with the same task.

  3. The repetition effect in building and construction works

    DEFF Research Database (Denmark)

    Gottlieb, Stefan Christoffer; Haugbølle, Kim

    are then applied on the Public Transport Authorities' main account structure of units and costs, and a method for assessing the possibilities of achieving effects of repetition for each account is described. Finally, the report summarises the core conditions necessary to take into consideration in relation......This report summarises the results from the work undertaken for the Public Transport Authority on the effect of learning and repetition in building and construction works. The results are applied by the Public Transport Authority in a new budgeting model, while the agency investigates...... the establishment of a new railway between Copenhagen and Ringsted. Drawing on an extensive literature review, the effect of repetition is determined to be in the range of 6-12 %. Further, the report identifies a series of factors affecting the possibilities of achieving effects of repetition. These factors...

  4. The Sherpa Maximum Likelihood Estimator

    Science.gov (United States)

    Nguyen, D.; Doe, S.; Evans, I.; Hain, R.; Primini, F.

    2011-07-01

    A primary goal for the second release of the Chandra Source Catalog (CSC) is to include X-ray sources with as few as 5 photon counts detected in stacked observations of the same field, while maintaining acceptable detection efficiency and false source rates. Aggressive source detection methods will result in detection of many false positive source candidates. Candidate detections will then be sent to a new tool, the Maximum Likelihood Estimator (MLE), to evaluate the likelihood that a detection is a real source. MLE uses the Sherpa modeling and fitting engine to fit a model of a background and source to multiple overlapping candidate source regions. A background model is calculated by simultaneously fitting the observed photon flux in multiple background regions. This model is used to determine the quality of the fit statistic for a background-only hypothesis in the potential source region. The statistic for a background-plus-source hypothesis is calculated by adding a Gaussian source model convolved with the appropriate Chandra point spread function (PSF) and simultaneously fitting the observed photon flux in each observation in the stack. Since a candidate source may be located anywhere in the field of view of each stacked observation, a different PSF must be used for each observation because of the strong spatial dependence of the Chandra PSF. The likelihood of a valid source being detected is a function of the two statistics (for background alone, and for background-plus-source). The MLE tool is an extensible Python module with potential for use by the general Chandra user.

  5. Vestige: Maximum likelihood phylogenetic footprinting

    Directory of Open Access Journals (Sweden)

    Maxwell Peter

    2005-05-01

    Full Text Available Abstract Background Phylogenetic footprinting is the identification of functional regions of DNA by their evolutionary conservation. This is achieved by comparing orthologous regions from multiple species and identifying the DNA regions that have diverged less than neutral DNA. Vestige is a phylogenetic footprinting package built on the PyEvolve toolkit that uses probabilistic molecular evolutionary modelling to represent aspects of sequence evolution, including the conventional divergence measure employed by other footprinting approaches. In addition to measuring the divergence, Vestige allows the expansion of the definition of a phylogenetic footprint to include variation in the distribution of any molecular evolutionary processes. This is achieved by displaying the distribution of model parameters that represent partitions of molecular evolutionary substitutions. Examination of the spatial incidence of these effects across regions of the genome can identify DNA segments that differ in the nature of the evolutionary process. Results Vestige was applied to a reference dataset of the SCL locus from four species and provided clear identification of the known conserved regions in this dataset. To demonstrate the flexibility to use diverse models of molecular evolution and dissect the nature of the evolutionary process Vestige was used to footprint the Ka/Ks ratio in primate BRCA1 with a codon model of evolution. Two regions of putative adaptive evolution were identified illustrating the ability of Vestige to represent the spatial distribution of distinct molecular evolutionary processes. Conclusion Vestige provides a flexible, open platform for phylogenetic footprinting. Underpinned by the PyEvolve toolkit, Vestige provides a framework for visualising the signatures of evolutionary processes across the genome of numerous organisms simultaneously. By exploiting the maximum-likelihood statistical framework, the complex interplay between mutational

  6. Neural dynamics during repetitive visual stimulation

    Science.gov (United States)

    Tsoneva, Tsvetomira; Garcia-Molina, Gary; Desain, Peter

    2015-12-01

    Objective. Steady-state visual evoked potentials (SSVEPs), the brain responses to repetitive visual stimulation (RVS), are widely utilized in neuroscience. Their high signal-to-noise ratio and ability to entrain oscillatory brain activity are beneficial for their applications in brain-computer interfaces, investigation of neural processes underlying brain rhythmic activity (steady-state topography) and probing the causal role of brain rhythms in cognition and emotion. This paper aims at analyzing the space and time EEG dynamics in response to RVS at the frequency of stimulation and ongoing rhythms in the delta, theta, alpha, beta, and gamma bands. Approach.We used electroencephalography (EEG) to study the oscillatory brain dynamics during RVS at 10 frequencies in the gamma band (40-60 Hz). We collected an extensive EEG data set from 32 participants and analyzed the RVS evoked and induced responses in the time-frequency domain. Main results. Stable SSVEP over parieto-occipital sites was observed at each of the fundamental frequencies and their harmonics and sub-harmonics. Both the strength and the spatial propagation of the SSVEP response seem sensitive to stimulus frequency. The SSVEP was more localized around the parieto-occipital sites for higher frequencies (>54 Hz) and spread to fronto-central locations for lower frequencies. We observed a strong negative correlation between stimulation frequency and relative power change at that frequency, the first harmonic and the sub-harmonic components over occipital sites. Interestingly, over parietal sites for sub-harmonics a positive correlation of relative power change and stimulation frequency was found. A number of distinct patterns in delta (1-4 Hz), theta (4-8 Hz), alpha (8-12 Hz) and beta (15-30 Hz) bands were also observed. The transient response, from 0 to about 300 ms after stimulation onset, was accompanied by increase in delta and theta power over fronto-central and occipital sites, which returned to baseline

  7. Autism and exergaming: effects on repetitive behaviors and cognition

    OpenAIRE

    Anderson-Hanley C; Tureck K; Schneiderman RL

    2011-01-01

    Cay Anderson-Hanley, Kimberly Tureck, Robyn L Schneiderman Department of Psychology, Union College, Schenectady, NY, USA Abstract: Autism is a neurodevelopmental disorder that leads to impairment in social skills and delay in language development, and results in repetitive behaviors and restricted interests that impede academic and social involvement. Physical exercise has been shown to decrease repetitive behaviors in autistic children and improve cognitive function across the life-span. Ex...

  8. Breakdown behavior of electronics at variable pulse repetition rates

    OpenAIRE

    Korte, S.; H. Garbe

    2006-01-01

    The breakdown behavior of electronics exposed to single transient electromagnetic pulses is subject of investigations for several years. State-of-the-art pulse generators additionally provide the possibility to generate pulse sequences with variable pulse repetition rate. In this article the influence of this repetition rate variation on the breakdown behavior of electronic systems is described. For this purpose microcontroller systems are examined during line-led exposure to pulses with repe...

  9. Analysis of repetitive DNA in chromosomes by flow cytometry.

    Science.gov (United States)

    Brind'Amour, Julie; Lansdorp, Peter M

    2011-06-01

    We developed a flow cytometry method, chromosome flow fluorescence in situ hybridization (FISH), called CFF, to analyze repetitive DNA in chromosomes using FISH with directly labeled peptide nucleic acid (PNA) probes. We used CFF to measure the abundance of interstitial telomeric sequences in Chinese hamster chromosomes and major satellite sequences in mouse chromosomes. Using CFF we also identified parental homologs of human chromosome 18 with different amounts of repetitive DNA.

  10. Linear- and Repetitive-Feature Detection Within Remotely Sensed Imagery

    Science.gov (United States)

    2017-04-01

    1.1 Background The Army desires the ability to deliver cargo, equipment, and personnel to harsh locations almost anywhere on the planet . This...because the Hough transform is designed to look for straight linear features, which most real- life fea- tures are not. As mention previously, it is...repetitive features are differentiated based on their appearance in the images of interest; however, real- life repetitive features often corre- spond to

  11. Linear- and Repetitive Feature Detection Within Remotely Sensed Imagery

    Science.gov (United States)

    2017-04-01

    1.1 Background The Army desires the ability to deliver cargo, equipment, and personnel to harsh locations almost anywhere on the planet . This...because the Hough transform is designed to look for straight linear features, which most real- life fea- tures are not. As mention previously, it is...repetitive features are differentiated based on their appearance in the images of interest; however, real- life repetitive features often corre- spond to

  12. Brain Injury Following Repetitive Apnea in Newborn Piglets

    Science.gov (United States)

    Schears, Gregory; Creed, Jennifer; Antoni, Diego; Zaitseva, Tatiana; Greeley, William; Wilson, David F.; Pastuszko, Anna

    Repetitive apnea is associated with a significant increase in extracellular dopamine, generation of free radicals as determined by o-tyrosine formation and increase in Fluoro-Jade staining of degenerating neurons. This increase in extracellular dopamine and of hydroxyl radicals in striatum of newborn brain is likely to be at least partly responsible for the neuronal injury and neurological side effects of repetitive apnea.

  13. Illusory sensation of movement induced by repetitive transcranial magnetic stimulation

    DEFF Research Database (Denmark)

    Christensen, Mark Schram; Lundbye-Jensen, J.; Grey, M.J.;

    2010-01-01

    Human movement sense relies on both somatosensory feedback and on knowledge of the motor commands used to produce the movement. We have induced a movement illusion using repetitive transcranial magnetic stimulation over primary motor cortex and dorsal premotor cortex in the absence of limb moveme...... premotor cortex stimulation was less affected by sensory and motor deprivation than was primary motor cortex stimulation. We propose that repetitive transcranial magnetic stimulation over dorsal premotor cortex produces a corollary discharge that is perceived as movement....

  14. Grade repetition in primary school from teachers’ perspective

    Directory of Open Access Journals (Sweden)

    Malinić Dušica

    2011-01-01

    Full Text Available School underachievement is exhibited gradually, in different forms, while grade repetition figures as one of the most prominent forms of underachievement. In order to observe this phenomenon from different perspectives, we conducted a research aimed at identifying teacher attitudes towards grade repetition and grade repeaters in primary school, based on their perceptions of: (a the cause of grade repetition; (b the responsibility for grade repetition and (c grade repetition as an educational measure. The administered questionnaire was constructed for the purposes of the research, descriptive statistics was used, and data were obtained on the sample of 136 teachers from 31 primary schools from the territory of the City of Belgrade. The results point out to the conclusion that teachers perceive grade repetition as, first and foremost, the consequence of students’ lack of interest in school and learning and undisciplined behavior in class. By treating student underachievement mainly as a consequence of laziness, lack of motivation and insufficient effort, teachers transfer responsibility to others, assessing that the personal degree of responsibility for the underachievement of their students is very low. The responsibility for underachievement is perceived more as a problem of the student, his/her family, peer group, than as the problem of teachers themselves. The concluding part points out to certain teaching procedures and methods that have proved to be useful in the prevention of student underachievement.

  15. Properties of water surface discharge at different pulse repetition rates

    Energy Technology Data Exchange (ETDEWEB)

    Ruma,; Yoshihara, K. [Graduate School of Science and Technology, Kumamoto University, Kumamoto 860-8555 (Japan); Hosseini, S. H. R., E-mail: hosseini@kumamoto-u.ac.jp; Sakugawa, T.; Akiyama, H. [Graduate School of Science and Technology, Kumamoto University, Kumamoto 860-8555 (Japan); Institute of Pulsed Power Science, Kumamoto University, Kumamoto 860-8555 (Japan); Akiyama, M. [Department of Electrical and Electronic Engineering, Kagoshima University, Kagoshima 890-0065 (Japan); Lukeš, P. [Institute of Plasma Physics, AS CR, Prague, Prague 18200 (Czech Republic)

    2014-09-28

    The properties of water surface discharge plasma for variety of pulse repetition rates are investigated. A magnetic pulse compression (MPC) pulsed power modulator able to deliver pulse repetition rates up to 1000 Hz, with 0.5 J per pulse energy output at 25 kV, was used as the pulsed power source. Positive pulse with a point-to-plane electrode configuration was used for the experiments. The concentration and production yield of hydrogen peroxide (H₂O₂) were quantitatively measured and orange II organic dye was treated, to evaluate the chemical properties of the discharge reactor. Experimental results show that the physical and chemical properties of water surface discharge are not influenced by pulse repetition rate, very different from those observed for under water discharge. The production yield of H₂O₂ and degradation rate per pulse of the dye did not significantly vary at different pulse repetition rates under a constant discharge mode on water surface. In addition, the solution temperature, pH, and conductivity for both water surface and underwater discharge reactors were measured to compare their plasma properties for different pulse repetition rates. The results confirm that surface discharge can be employed at high pulse repetition rates as a reliable and advantageous method for industrial and environmental decontamination applications.

  16. Maximum Entropy, Word-Frequency, Chinese Characters, and Multiple Meanings

    CERN Document Server

    Yan, Xiao-Yong

    2014-01-01

    The word-frequency distribution of a text written by an author is well accounted for by a maximum entropy distribution, the RGF (random group formation)-prediction. The RGF-distribution is completely determined by the a priori values of the total number of words in the text (M), the number of distinct words (N) and the number of repetitions of the most common word (k_max). It is here shown that this maximum entropy prediction also describes a text written in Chinese characters. In particular it is shown that although the same Chinese text written in words and Chinese characters have quite differently shaped distributions, they are nevertheless both well predicted by their respective three a priori characteristic values. It is pointed out that this is analogous to the change in the shape of the distribution when translating a given text to another language. Another consequence of the RGF-prediction is that taking a part of a long text will change the input parameters (M, N, k_max) and consequently also the sha...

  17. Effects of 4-Week Training Intervention with Unknown Loads on Power Output Performance and Throwing Velocity in Junior Team Handball Players.

    Directory of Open Access Journals (Sweden)

    Rafael Sabido

    Full Text Available To compare the effect of 4-week unknown vs known loads strength training intervention on power output performance and throwing velocity in junior team handball players.Twenty-eight junior team-handball players (17.2 ± 0.6 years, 1.79 ± 0.07 m, 75.6 ± 9.4 kgwere divided into two groups (unknown loads: UL; known loads: KL. Both groups performed two sessions weekly consisting of four sets of six repetitions of the bench press throw exercise, using the 30%, 50% and 70% of subjects' individual 1 repetition maximum (1RM. In each set, two repetitions with each load were performed, but the order of the loads was randomised. In the KL group, researchers told the subjects the load to mobilise prior each repetition, while in the UL group, researchers did not provide any information. Maximal dynamic strength (1RM bench press, power output (with 30, 50 and 70% of 1RM and throwing velocity (7 m standing throw and 9 m jumping throw were assessed pre- and post-training intervention.Both UL and KL group improved similarly their 1RM bench press as well as mean and peak power with all loads. There were significant improvements in power developed in all the early time intervals measured (150 ms with the three loads (30, 50, 70% 1RM in the UL group, while KL only improved with 30% 1RM (all the time intervals and with 70% 1RM (at certain time intervals. Only the UL group improved throwing velocity in both standing (4.7% and jumping (5.3% throw (p > 0.05.The use of unknown loads has led to greater gains in power output in the early time intervals as well as to increases in throwing velocity compared with known loads. Therefore unknown loads are of significant practical use to increase both strength and in-field performance in a short period of training.

  18. Place field repetition and spatial learning in a multicompartment environment.

    Science.gov (United States)

    Grieves, Roddy M; Jenkins, Bryan W; Harland, Bruce C; Wood, Emma R; Dudchenko, Paul A

    2016-01-01

    Recent studies have shown that place cells in the hippocampus possess firing fields that repeat in physically similar, parallel environments. These results imply that it should be difficult for animals to distinguish parallel environments at a behavioral level. To test this, we trained rats on a novel odor-location task in an environment with four parallel compartments which had previously been shown to yield place field repetition. A second group of animals was trained on the same task, but with the compartments arranged in different directions, an arrangement we hypothesised would yield less place field repetition. Learning of the odor-location task in the parallel compartments was significantly impaired relative to learning in the radially arranged compartments. Fewer animals acquired the full discrimination in the parallel compartments compared to those trained in the radial compartments, and the former also required many more sessions to reach criterion compared to the latter. To confirm that the arrangement of compartments yielded differences in place cell repetition, in a separate group of animals we recorded from CA1 place cells in both environments. We found that CA1 place cells exhibited repeated fields across four parallel local compartments, but did not do so when the same compartments were arranged radially. To confirm that the differences in place field repetition across the parallel and radial compartments depended on their angular arrangement, and not incidental differences in access to an extra-maze visual landmark, we repeated the recordings in a second set of rats in the absence of the orientation landmark. We found, once again, that place fields showed repetition in parallel compartments, and did not do so in radially arranged compartments. Thus place field repetition, or lack thereof, in these compartments was not dependent on extra-maze cues. Together, these results imply that place field repetition constrains spatial learning.

  19. Transitions between corona, glow, and spark regimes of nanosecond repetitively pulsed discharges in air at atmospheric pressure

    Science.gov (United States)

    Pai, David Z.; Lacoste, Deanna A.; Laux, Christophe O.

    2010-05-01

    In atmospheric pressure air preheated from 300 to 1000 K, the nanosecond repetitively pulsed (NRP) method has been used to generate corona, glow, and spark discharges. Experiments have been performed to determine the parameter space (applied voltage, pulse repetition frequency, ambient gas temperature, and interelectrode gap distance) of each discharge regime. In particular, the experimental conditions necessary for the glow regime of NRP discharges have been determined, with the notable result that there exists a minimum and maximum gap distance for its existence at a given ambient gas temperature. The minimum gap distance increases with decreasing gas temperature, whereas the maximum does not vary appreciably. To explain the experimental results, an analytical model is developed to explain the corona-to-glow (C-G) and glow-to-spark (G-S) transitions. The C-G transition is analyzed in terms of the avalanche-to-streamer transition and the breakdown field during the conduction phase following the establishment of a conducting channel across the discharge gap. The G-S transition is determined by the thermal ionization instability, and we show analytically that this transition occurs at a certain reduced electric field for the NRP discharges studied here. This model shows that the electrode geometry plays an important role in the existence of the NRP glow regime at a given gas temperature. We derive a criterion for the existence of the NRP glow regime as a function of the ambient gas temperature, pulse repetition frequency, electrode radius of curvature, and interelectrode gap distance.

  20. Optimizing strategy software for repetitive construction projects within multi-mode resources

    Directory of Open Access Journals (Sweden)

    Remon Fayek Aziz

    2013-09-01

    Full Text Available Estimating tender data for specific project is the most essential part in construction areas as of contractor’s view such as: proposed project duration with corresponding gross value and cash flows. This paper focuses on how to calculate tender data using Optimizing Strategy Software (OSS for repetitive construction projects with identical activity’s duration in case of single number of crew such as: project duration, project/bid price, project maximum working capital, and project net present value of the studied project. A simplified multi-objective optimization software (OSS will be presented that creates best tender data to contractor compared with more feasible options generated from multi-mode resources in a given project. OSS is intended to give more scenarios which provide practical support for typical construction contractors who need to optimize resource utilization in order to minimize project duration, project/bid price, and project maximum working capital while maximizing its net present value simultaneously. OSS is designed by java programing code system to provide a number of new and unique capabilities, including: (1 Ranking the obtained optimal plans according to a set of planner specified weights representing the relative importance of duration, price, maximum working capital and net present value in the analyzed project; (2 Visualizing and viewing the generated optimal trade-off; and (3 Providing seamless integration with available project management calculations. In order to provide the aforementioned capabilities of OSS, the system is implemented and developed in four main modules: (1 A user interface module; (2 A database module; (3 A running module; (4 A connecting module. At the end of the paper, an illustrative example will be presented to demonstrate and verify the applications of the proposed software (OSS to an optimization expressway of repetitive construction project.

  1. RPERT: Repetitive-Projects Evaluation and Review Technique

    Directory of Open Access Journals (Sweden)

    Remon Fayek Aziz

    2014-03-01

    Full Text Available Estimating expected completion probability of any repetitive construction project with a specified/certain duration including repetitive identical activities by using program evaluation and review technique is the most essential part in construction areas since the activities were had optimistic, most likely and pessimistic durations. This paper focuses on the calculation of expected completion probability of any repetitive construction project within a specified/certain duration (contract duration by using Line Of Balance technique (LOB in case of single or multiple number of crews integrated with Program Evaluation and Review Technique (PERT. Repetitive-Projects Evaluation and Review Technique (RPERT, which is a simplified software, will generate the expected project completion probability of a specified/certain duration (contract duration. RPERT software is designed by java programming code system to provide a number of new and unique capabilities, including: (1 Viewing the expected project completion probability according to a set of specified durations per each identical activity (optimistic time, most likely time, and pessimistic time in the analyzed project; (2 Providing seamless integration with available project time calculations. In order to provide the aforementioned capabilities of RPERT, the system is implemented and developed in four main modules: (1 A user interface module; (2 A database module; (3 A running module; and (4 A processing module. At the end, an illustrative example will be presented to demonstrate and verify the applications of proposed software (RPERT, by using probabilistic calculations for repetitive construction projects.

  2. Autism and exergaming: effects on repetitive behaviors and cognition

    Directory of Open Access Journals (Sweden)

    Anderson-Hanley C

    2011-09-01

    Full Text Available Cay Anderson-Hanley, Kimberly Tureck, Robyn L Schneiderman Department of Psychology, Union College, Schenectady, NY, USA Abstract: Autism is a neurodevelopmental disorder that leads to impairment in social skills and delay in language development, and results in repetitive behaviors and restricted interests that impede academic and social involvement. Physical exercise has been shown to decrease repetitive behaviors in autistic children and improve cognitive function across the life-span. Exergaming combines physical and mental exercise simultaneously by linking physical activity movements to video game control and may yield better compliance with exercise. In this investigation, two pilot studies explored the potential behavioral and cognitive benefits of exergaming. In Pilot I, twelve children with autism spectrum disorders completed a control task and an acute bout of Dance Dance Revolution (DDR; in Pilot II, ten additional youths completed an acute bout of cyber cycling. Repetitive behaviors and executive function were measured before and after each activity. Repetitive behaviors significantly decreased, while performance on Digits Backwards improved following the exergaming conditions compared with the control condition. Additional research is needed to replicate these findings, and to explore the application of exergaming for the management of behavioral disturbance and to increase cognitive control in children on the autism spectrum. Keywords: autism, repetitive behaviors, exergaming, exercise, executive function

  3. Quantifying repetitive speech in autism spectrum disorders and language impairment.

    Science.gov (United States)

    van Santen, Jan P H; Sproat, Richard W; Hill, Alison Presmanes

    2013-10-01

    We report on an automatic technique for quantifying two types of repetitive speech: repetitions of what the child says him/herself (self-repeats) and of what is uttered by an interlocutor (echolalia). We apply this technique to a sample of 111 children between the ages of four and eight: 42 typically developing children (TD), 19 children with specific language impairment (SLI), 25 children with autism spectrum disorders (ASD) plus language impairment (ALI), and 25 children with ASD with normal, non-impaired language (ALN). The results indicate robust differences in echolalia between the TD and ASD groups as a whole (ALN + ALI), and between TD and ALN children. There were no significant differences between ALI and SLI children for echolalia or self-repetitions. The results confirm previous findings that children with ASD repeat the language of others more than other populations of children. On the other hand, self-repetition does not appear to be significantly more frequent in ASD, nor does it matter whether the child's echolalia occurred within one (immediate) or two turns (near-immediate) of the adult's original utterance. Furthermore, non-significant differences between ALN and SLI, between TD and SLI, and between ALI and TD are suggestive that echolalia may not be specific to ALN or to ASD in general. One important innovation of this work is an objective fully automatic technique for assessing the amount of repetition in a transcript of a child's utterances.

  4. Receiver function estimated by maximum entropy deconvolution

    Institute of Scientific and Technical Information of China (English)

    吴庆举; 田小波; 张乃铃; 李卫平; 曾融生

    2003-01-01

    Maximum entropy deconvolution is presented to estimate receiver function, with the maximum entropy as the rule to determine auto-correlation and cross-correlation functions. The Toeplitz equation and Levinson algorithm are used to calculate the iterative formula of error-predicting filter, and receiver function is then estimated. During extrapolation, reflective coefficient is always less than 1, which keeps maximum entropy deconvolution stable. The maximum entropy of the data outside window increases the resolution of receiver function. Both synthetic and real seismograms show that maximum entropy deconvolution is an effective method to measure receiver function in time-domain.

  5. The effects of accentuated eccentric loading on strength, muscle hypertrophy, and neural adaptations in trained individuals.

    Science.gov (United States)

    Brandenburg, Jason P; Docherty, David

    2002-02-01

    The purpose of this study was to compare the strength and neuromuscular adaptations for dynamic constant external resistance (DCER) training and dynamic accentuated external resistance (DAER) training (resistance training employing an accentuated load during eccentric actions). Male subjects active in resistance training were assigned to either a DCER training group (n = 10) or a DAER training group (n = 8) for 9 weeks. Subjects in the DCER group performed 4 sets of 10 repetitions with a load of 75% concentric 1 repetition maximum (RM). Subjects in the DAER group performed 3 sets of 10 repetitions with a concentric load of 75% of 1RM and an eccentric load of approximately 120% of concentric 1RM. Three measures reflecting adaptation of elbow flexors and extensors were recorded pretraining and posttraining: concentric 1RM, muscle cross-sectional area (CSA), and specific tension. Strength was assessed at midtraining periods. No significant changes in muscle CSA were observed in either group. Both training groups experienced significant increases in concentric 1RM and specific tension of both the elbow flexors and extensors, but compared with DCER training, DAER training produced significantly greater increases in concentric 1RM of the elbow extensors. These results suggest that, for some exercises, DAER training may be more effective than DCER training in developing strength within a 9-week training phase. However, for trained subjects, neither protocol is effective in eliciting muscle hypertrophy.

  6. Maximum Power from a Solar Panel

    Directory of Open Access Journals (Sweden)

    Michael Miller

    2010-01-01

    Full Text Available Solar energy has become a promising alternative to conventional fossil fuel sources. Solar panels are used to collect solar radiation and convert it into electricity. One of the techniques used to maximize the effectiveness of this energy alternative is to maximize the power output of the solar collector. In this project the maximum power is calculated by determining the voltage and the current of maximum power. These quantities are determined by finding the maximum value for the equation for power using differentiation. After the maximum values are found for each time of day, each individual quantity, voltage of maximum power, current of maximum power, and maximum power is plotted as a function of the time of day.

  7. ROBUST REPETITIVE CONTROL FOR IMPROVING RATE SMOOTHNESS OF TEST TURNTABLE

    Institute of Scientific and Technical Information of China (English)

    LIUYu; ZENGMing; SUBao-ku

    2005-01-01

    A robust repetitive control scheme is used to improve the rate smoothness of a brushless DC motor (BLDCM) driven test turntable. The method synthesizes variable structure control (VSC) laws and repetitive control (RC) laws in a complementary manner. The VSC strategy can stabilize the system and suppress uncertainties, such as the aperiodic disturbance and noises, while RC strategy can eliminate the periodic rate fluctuation in a steady state. The convergence of the repetitive learning process is also guaranteed by VSC. A general nonlinear system model is discussed. The model can be considered as an extension of BLDCMs. The stability and asymptotic position tracking performance are validated by using Lyapunov functions. Simulation results show the effectiveness of the proposed approach for improving the rate smoothness.

  8. Body-focused repetitive behavior disorders in ICD-11

    Directory of Open Access Journals (Sweden)

    Jon E. Grant

    2014-01-01

    Full Text Available This article addresses the question of how body-focused repetitive behavior disorders (e.g., trichotillomania and skin-picking disorder should be characterized in ICD-11. The article reviews the historical nosology of the two disorders and the current approaches in DSM-5 and ICD-10. Although data are limited and mixed regarding the optimal relationship between body-focused repetitive behavior disorders and nosological categories, these conditions should be included within the obsessive-compulsive and related disorders category, as this is how most clinicians see these behaviors, and as this may optimize clinical utility. The descriptions of these disorders should largely mirror those in DSM-5, given the evidence from recent field surveys. The recommendations regarding ICD-11 and body-focused repetitive behavior disorders should promote the global identification and treatment of these conditions in primary care settings.

  9. Repeated text in unrelated passages: Repetition versus meaning selection effects.

    Science.gov (United States)

    Klin, Celia M; Drumm, April M; Ralano, Angela S

    2009-07-01

    Despite previous findings, Klin, Ralano, and Weingartner (2007) found transfer benefits across unrelated passages. After processing an ambiguous phrase in Story A that was biased toward its sarcastic meaning, readers were more likely to interpret the identical phrase in Story B as sarcastic, even though it contained no disambiguating information. In the present experiments, we found both repetition effects (a benefit for the lexical items) and meaning selection effects (a benefit for the selected meaning of the phrase) with short delays between Stories A and B; with longer delays, only repetition effects were found. Whereas decreasing the elaboration of the phrase eliminated both effects, moving the disambiguating context from before to after the phrase eliminated meaning selection effects only. We conclude that meaning selection effects, which are based on conceptual overlap, are more sensitive to context changes and less robust than repetition effects, which are based on both perceptual and conceptual overlap.

  10. Effects of repetition and temperature on Contingent Electrical Stimulation

    DEFF Research Database (Denmark)

    Castrillon, Eduardo E.; Zhou, Xinwen; Svensson, Peter

    Effects of repetition and temperature on Contingent Electrical Stimulation. E.E. Castrillon W1, 2, Xinwen Zhou 3, P. Svensson1, 2, 4 1 Department of Dentistry and Oral Health, Section of Orofacial Pain and Jaw Function, Aarhus University, Denmark2 Scandinavian Center for Orofacial Neuroscience...... (SCON)3 Department of Dentistry, Beijing Shijitan Hospital, Capital Medical University, Beijing, China. 4 Department of Dental Medicine, Karolinska Institutet, Huddinge, Sweden  Background: Contingent electrical stimulation (CES) of the facial skin has been shown to reduce electromyographic (EMG......) activity associated with bruxism. Repetition of the electrical stimulus and skin surface temperature (ST) may affect the perception of CES and possibly also the inhibitory EMG effects.Objectives: To determine the effects of stimulus repetition and skin ST on the perception of CES.  Methods: Healthy...

  11. Restricted Repetitive Sampling in Designing of Control Charts

    Directory of Open Access Journals (Sweden)

    Muhammad Anwar Mughal

    2017-06-01

    Full Text Available In this article a criteria have been defined to classify the existing repetitive sampling into soft, moderate and strict conditions. Behind this division a ratio has been suggested i.e. c2 (constant used in repetitive limits to c1(constant used in control limit in slabs. A restricted criterion has been devised on the existing repetitive sampling. By embedding the proposed schematic in the control chart it becomes highly efficient in detecting the shifts quite earlier as well as it detects even smaller shifts at smaller ARLs. To facilitate the user for best choice the restricted criterion has further categorized to softly restricted, moderately restricted and strictly restricted. The restricted conditions are dependent on value of restriction parameter ’m’ varies 2 to 6. The application of proposed scheme on selected cases is given in tables which are self explanatory.

  12. Oral Language Skills Moderate Nonword Repetition Skills in Children with Dyslexia: A Meta-Analysis of the Role of Nonword Repetition Skills in Dyslexia

    Science.gov (United States)

    Melby-Lervag, Monica; Lervag, Arne

    2012-01-01

    We present a meta-analysis reviewing studies that have focused on the relationship between dyslexia and nonword repetition. The results show that children with dyslexia have poorer nonword repetition skills when compared to both chronological-age and reading-level controls. However, the severity of the nonword repetition problem varies…

  13. Oral Language Skills Moderate Nonword Repetition Skills in Children with Dyslexia: A Meta-Analysis of the Role of Nonword Repetition Skills in Dyslexia

    Science.gov (United States)

    Melby-Lervag, Monica; Lervag, Arne

    2012-01-01

    We present a meta-analysis reviewing studies that have focused on the relationship between dyslexia and nonword repetition. The results show that children with dyslexia have poorer nonword repetition skills when compared to both chronological-age and reading-level controls. However, the severity of the nonword repetition problem varies…

  14. Effect of repetitive mckenzie lumbar spine exercises on cardiovascular system

    Directory of Open Access Journals (Sweden)

    Agrawal Sonal S

    2014-07-01

    Full Text Available Background & Purpose: McKenzie exercises for the lumbar spine, which are done repeatedly, such as flexion in standing (FIS, extension in standing flexion in lying (FIL & extension in lying (EIL have been used in the management of low back pain for over three decades. The cardiovascular effects of exercises that involve postural stabilization, arm exercises and of exercises performed in lying are well known, but there are seldom studies performed to assess the cardiovascular effects of these commonly used McKenzie exercises. Therefore the study focused on evaluating the effects of 4 commonly used McKenzie exercises on the cardiovascular system. Methods: 80 subjects in the age group of 20-59 years were randomly assigned into 4 groups according to their age, such that such that each group comprised of an equal number of subjects & equal number of males & females. Each subject performed all the 4 exercises (FIS, EIS, FIL & EIL for 10, 15 & 20 repetitions respectively. Heart rate, blood pressure & rate pressure product were recorded before & after each set of repetitions & after each type of exercise. Results: Repetitive McKenzie lumbar spine exercises had cardiovascular effects in apparently healthy subjects (both male & female. Exercises performed in lying were hemodynamically more demanding than that performed in standing, also exercises involving flexion of the lumbar spine elicited greater cardiovascular demand as compared to extension exercises i.e. FIL>EIL>FIS>EIS irrespective of the number of repetitions, 10, 15 or 20. The cardiovascular demand for a given subject increased as the number of repetitions increased, for all the 4 exercises. Conclusion: McKenzie exercises when done repetitively have cardiovascular effects in healthy subjects.

  15. The neural correlates of picture naming facilitated by auditory repetition

    Directory of Open Access Journals (Sweden)

    Heath Shiree

    2012-02-01

    Full Text Available Abstract Background Overt repetition of auditorily presented words can facilitate picture naming performance in both unimpaired speakers and individuals with word retrieval difficulties, but the underlying neurocognitive mechanisms and longevity of such effects remain unclear. This study used functional magnetic resonance imaging to examine whether different neurological mechanisms underlie short-term (within minutes and long-term (within days facilitation effects from an auditory repetition task in healthy older adults. Results The behavioral results showed that both short- and long-term facilitated items were named significantly faster than unfacilitated items, with short-term items significantly faster than long-term items. Neuroimaging analyses identified a repetition suppression effect for long-term facilitated items, relative to short-term facilitated and unfacilitated items, in regions known to be associated with both semantic and phonological processing. A repetition suppression effect was also observed for short-term facilitated items when compared to unfacilitated items in a region of the inferior temporal lobe linked to semantic processing and object recognition, and a repetition enhancement effect when compared to long-term facilitated items in a posterior superior temporal region associated with phonological processing. Conclusions These findings suggest that different neurocognitive mechanisms underlie short- and long-term facilitation of picture naming by an auditory repetition task, reflecting both phonological and semantic processing. More specifically, the brain areas engaged were consistent with the view that long-term facilitation may be driven by a strengthening of semantic-phonological connections. Short-term facilitation, however, appears to result in more efficient semantic processing and/or object recognition, possibly in conjunction with active recognition of the phonological form.

  16. Frobenius morphisms and stable module categories of repetitive algebras

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Let k be the algebraic closure of a finite field F_q and A be a finite dimensional k-algebra with a Frobenius morphism F.In the present paper we establish a relation between the stable module category of the repetitive algebra  of A and that of the repetitive algebra of the fixed-point algebra A~F.As an application,it is shown that the derived category of A~F is equivalent to the subcategory of F-stable objects in the derived category of A when A has a finite global dimension.

  17. Risk factors for hand-wrist disorders in repetitive work

    DEFF Research Database (Denmark)

    Thomsen, J. F.; Mikkelsen, S.; Andersen, JH

    2007-01-01

    (wrist pain and palpation tenderness) were determined in 3123 employees in 19 industrial settings. With the use of questionnaires and video recordings of homogenous work tasks number of wrist movements, hand force requirements and wrist position were analysed as risk factors for hand-wrist disorders......OBJECTIVES: To identify the risk of hand-wrist disorders related to repetitive movements, use of hand force and wrist position in repetitive monotonous work. METHODS: Using questionnaires and physical examinations, the prevalence and incidence of hand-wrist pain and possible extensor tendonitis...... were less consistent. Working with the hand in a non-neutral position could not be identified as a risk factor...

  18. Demonstration of a high repetition rate capillary discharge waveguide

    Energy Technology Data Exchange (ETDEWEB)

    Gonsalves, A. J., E-mail: ajgonsalves@lbl.gov; Pieronek, C.; Daniels, J.; Bulanov, S. S.; Waldron, W. L.; Mittelberger, D. E.; Leemans, W. P. [Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States); Liu, F.; Antipov, S.; Butler, J. E. [Euclid TechLabs, Gaithersburg, Maryland 20879 (United States); Bobrova, N. A.; Sasorov, P. V. [Keldysh Institute of Applied Mathematics, Moscow (Russian Federation)

    2016-01-21

    A hydrogen-filled capillary discharge waveguide operating at kHz repetition rates is presented for parameters relevant to laser plasma acceleration (LPA). The discharge current pulse was optimized for erosion mitigation with laser guiding experiments and MHD simulation. Heat flow simulations and measurements showed modest temperature rise at the capillary wall due to the average heat load at kHz repetition rates with water-cooled capillaries, which is promising for applications of LPAs such as high average power radiation sources.

  19. Medium Repetition Rate TEA Laser For Industrial Applications

    Science.gov (United States)

    Walter, Bruno

    1987-09-01

    The design and performance of an inexpensive compact repetitively pulsed TEA CO2 laser is described. The device uses a modified corona preionization technique and a fast transverse gas flow to achieve high repetition rates. An output energy of 500 mJ per pulse and an out-put power of 6.2W at 40Hz have been obtained. Due to the small energy needed for preionization, the efficiency of the device is high, whereas the gas dissociation is low when compared with commercial laser systems. This results in the relatively small fresh laser gas exchange of 20 ltr h-1 for long term operation.

  20. A mouse model of human repetitive mild traumatic brain injury

    OpenAIRE

    Kane, Michael J; Pérez, Mariana Angoa; Briggs, Denise I.; Viano, David C.; Kreipke, Christian W.; Kuhn, Donald M.

    2011-01-01

    A novel method for the study of repetitive mild traumatic brain injury (rmTBI) that models the most common form of head injury in humans is presented. Existing animal models of TBI impart focal, severe damage unlike that seen in repeated and mild concussive injuries, and few are configured for repetitive application. Our model is a modification of the Marmarou weight drop method and allows repeated head impacts to lightly anesthetized mice. A key facet of this method is the delivery of an imp...

  1. Convention, Repetition and Abjection: The Way of the Gothic

    OpenAIRE

    Łowczanin Agnieszka

    2014-01-01

    This paper employs Deleuze and Kristeva in an examination of certain Gothic conventions. It argues that repetition of these conventions- which endows Gothicism with formulaic coherence and consistence but might also lead to predictability and stylistic deadlock-is leavened by a novelty that Deleuze would categorize as literary “gift.” This particular kind of “gift” reveals itself in the fiction of successive Gothic writers on the level of plot and is applied to the repetition of the genre’s m...

  2. Urine concentrations of repetitive doses of inhaled salbutamol

    DEFF Research Database (Denmark)

    Elers, J; Pedersen, Lars; Henninge, J;

    2011-01-01

    We examined blood and urine concentrations of repetitive doses of inhaled salbutamol in relation to the existing cut-off value used in routine doping control. We compared the concentrations in asthmatics with regular use of beta2-agonists prior to study and healthy controls with no previous use...... of beta2-agonists. We enrolled 10 asthmatics and 10 controls in an open-label study in which subjects inhaled repetitive doses of 400 microgram salbutamol every second hour (total 1600 microgram), which is the permitted daily dose by the World Anti-Doping Agency (WADA). Blood samples were collected...

  3. A Brief Account on the Functions of Rhetorical Repetition

    Institute of Scientific and Technical Information of China (English)

    Li Yuping

    2000-01-01

    It is believed that using rhetoric devices precisely is of great importance for the English Learners, if they want to write good articles. Repetition is one of the rhetoric devices that is frequently used in English writing. This paper gives a brief account on the four functions of repetition by presenting some typical examples, focusing the reader's attention on the significance of this device in the English writing. The following are the four functions: an effective means of emphasis; making anidea clear and easier; generating emotional force; heightening a certain atmosphere.

  4. Plasma Sheet Actuator Driven by Repetitive Nanosecond Pulses with a Negative DC Component

    Institute of Scientific and Technical Information of China (English)

    宋慧敏; 张乔根; 李应红; 贾敏; 吴云; 梁华

    2012-01-01

    A type of electrical discharge called sliding discharge was developed to generate plasma aerodynamic actuation for flow control. A three-electrode plasma sheet actuator driven by repetitive nanosecond pulses with a negative DC component was used to generate sliding discharge, which can be called nanosecond-pulse sliding discharge. The phenomenology and behaviour of the plasma sheet actuator were investigated experimentally. Discharge morphology shows that the formation of nanosecond-pulse sliding discharge is dependent on the peak value of the repetitive nanosecond pulses and negative DC component applied on the plasma sheet actuator. Compared to dielectric barrier discharge (DBD), the extension of plasma in nanosecond-pulse sliding discharge is quasi-diffusive, stable, longer and more intensive. Test results of particle image velocimetry demonstrate that the negative DC component applied to a third electrode could significantly modify the topology of the flow induced by nanosecond-pulse DBD. Body force induced by the nanosecond-pulse sliding discharge can be approximately in the order of mN. Both the maximum velocity and the body force induced by sliding discharge increase significantly as compared to single DBD. Therefore, nanosecond-pulse sliding discharge is a preferable plasma aerodynamic actuation generation mode, which is very promising in the field of aerodynamics.

  5. Statistical analysis of laser driven protons using a high-repetition-rate tape drive target system

    Directory of Open Access Journals (Sweden)

    Muhammad Noaman-ul-Haq

    2017-04-01

    Full Text Available One of the challenges for laser-driven proton beams for many potential applications is their stability and reproducibility. We investigate the stability of the laser driven proton beams through statistical analysis of the data obtained by employing a high repetition rate tape driven target system. The characterization of the target system shows the positioning of the target within ∼15  μm in the focal plane of an off-axis parabola, with less than a micron variation in surface flatness. By employing this stable target system, we study the stability of the proton beams driven by ultrashort and intense laser pulses. Protons with maximum energies of ∼6±0.3  MeV were accelerated for a large number of laser shots taken at a rate of 0.2 Hz with a stability of less than 5% variations in cutoff energy. The development of high repetition rate target system may provide a platform to understand the dynamics of laser driven proton beams at the rate required for future applications.

  6. An Improved Clutter Suppression Method for Weather Radars Using Multiple Pulse Repetition Time Technique

    Directory of Open Access Journals (Sweden)

    Yingjie Yu

    2017-01-01

    Full Text Available This paper describes the implementation of an improved clutter suppression method for the multiple pulse repetition time (PRT technique based on simulated radar data. The suppression method is constructed using maximum likelihood methodology in time domain and is called parametric time domain method (PTDM. The procedure relies on the assumption that precipitation and clutter signal spectra follow a Gaussian functional form. The multiple interleaved pulse repetition frequencies (PRFs that are used in this work are set to four PRFs (952, 833, 667, and 513 Hz. Based on radar simulation, it is shown that the new method can provide accurate retrieval of Doppler velocity even in the case of strong clutter contamination. The obtained velocity is nearly unbiased for all the range of Nyquist velocity interval. Also, the performance of the method is illustrated on simulated radar data for plan position indicator (PPI scan. Compared with staggered 2-PRT transmission schemes with PTDM, the proposed method presents better estimation accuracy under certain clutter situations.

  7. The inverse maximum dynamic flow problem

    Institute of Scientific and Technical Information of China (English)

    BAGHERIAN; Mehri

    2010-01-01

    We consider the inverse maximum dynamic flow (IMDF) problem.IMDF problem can be described as: how to change the capacity vector of a dynamic network as little as possible so that a given feasible dynamic flow becomes a maximum dynamic flow.After discussing some characteristics of this problem,it is converted to a constrained minimum dynamic cut problem.Then an efficient algorithm which uses two maximum dynamic flow algorithms is proposed to solve the problem.

  8. High-power, high repetition-rate, green-pumped, picosecond LBO optical parametric oscillator.

    Science.gov (United States)

    Kienle, Florian; Teh, Peh Siong; Lin, Dejiao; Alam, Shaif-Ul; Price, Jonathan H V; Hanna, D C; Richardson, David J; Shepherd, David P

    2012-03-26

    We report on a picosecond, green-pumped, lithium triborate optical parametric oscillator with record-high output power. It was synchronously pumped by a frequency-doubled (530 nm), pulse-compressed (4.4 ps), high-repetition-rate (230 MHz), fiber-amplified gain-switched laser diode. For a pump power of 17 W, a maximum signal and idler power of 3.7 W and 1.8 W was obtained from the optical parametric oscillator. A signal pulse duration of ~3.2 ps was measured and wide tunability from 651 nm to 1040 nm for the signal and from 1081 nm to 2851 nm for the idler was achieved.

  9. Maximum entropy, word-frequency, Chinese characters, and multiple meanings.

    Science.gov (United States)

    Yan, Xiaoyong; Minnhagen, Petter

    2015-01-01

    The word-frequency distribution of a text written by an author is well accounted for by a maximum entropy distribution, the RGF (random group formation)-prediction. The RGF-distribution is completely determined by the a priori values of the total number of words in the text (M), the number of distinct words (N) and the number of repetitions of the most common word (k(max)). It is here shown that this maximum entropy prediction also describes a text written in Chinese characters. In particular it is shown that although the same Chinese text written in words and Chinese characters have quite differently shaped distributions, they are nevertheless both well predicted by their respective three a priori characteristic values. It is pointed out that this is analogous to the change in the shape of the distribution when translating a given text to another language. Another consequence of the RGF-prediction is that taking a part of a long text will change the input parameters (M, N, k(max)) and consequently also the shape of the frequency distribution. This is explicitly confirmed for texts written in Chinese characters. Since the RGF-prediction has no system-specific information beyond the three a priori values (M, N, k(max)), any specific language characteristic has to be sought in systematic deviations from the RGF-prediction and the measured frequencies. One such systematic deviation is identified and, through a statistical information theoretical argument and an extended RGF-model, it is proposed that this deviation is caused by multiple meanings of Chinese characters. The effect is stronger for Chinese characters than for Chinese words. The relation between Zipf's law, the Simon-model for texts and the present results are discussed.

  10. High-power, highly stable KrF laser with a 4-kHz pulse repetition rate

    Science.gov (United States)

    Borisov, V. M.; El'tsov, A. V.; Khristoforov, O. B.

    2015-08-01

    An electric-discharge KrF laser (248 nm) with an average output power of 300 W is developed and studied. A number of new design features are related to the use of a laser chamber based on an Al2O3 ceramic tube. A high power and pulse repetition rate are achieved by using a volume discharge with lateral preionisation by the UV radiation of a creeping discharge in the form of a homogeneous plasma sheet on the surface of a plane sapphire plate. Various generators for pumping the laser are studied. The maximum laser efficiency is 3.1%, the maximum laser energy is 160 mJ pulse-1, and the pulse duration at half maximum is 7.5 ns. In the case of long-term operation at a pulse repetition rate of 4 kHz and an output power of 300 W, high stability of laser output energy (σ <= 0.7%) is achieved using an all-solid-state pump system.

  11. Handedness, repetitive transcranial magnetic stimulation and bulimic disorders.

    Science.gov (United States)

    Van den Eynde, F; Broadbent, H; Guillaume, S; Claudino, A; Campbell, I C; Schmidt, U

    2012-05-01

    Repetitive Transcranial Magnetic Stimulation (rTMS) research in psychiatry mostly excludes left-handed participants. We recruited left-handed people with a bulimic disorder and found that stimulation of the left prefrontal cortex may result in different effects in left- and right-handed people. This highlights the importance of handedness and cortex lateralisation for rTMS.

  12. Intrinsic and Extrinsic Motivation for Stereotypic and Repetitive Behavior

    Science.gov (United States)

    Joosten, Annette V.; Bundy, Anita C.; Einfeld, Stewart L.

    2009-01-01

    This study provides evidence for intrinsic and extrinsic motivators for stereotypical and repetitive behavior in children with autism and intellectual disability and children with intellectual disability alone. We modified the Motivation Assessment Scale (MAS) (1988b); dividing it into intrinsic and extrinsic measures and adding items to assess…

  13. Decomposition of Repetition Priming Processes in Word Translation

    Science.gov (United States)

    Francis, Wendy S.; Duran, Gabriela; Augustini, Beatriz K.; Luevano, Genoveva; Arzate, Jose C.; Saenz, Silvia P.

    2011-01-01

    Translation in fluent bilinguals requires comprehension of a stimulus word and subsequent production, or retrieval and articulation, of the response word. Four repetition-priming experiments with Spanish-English bilinguals (N = 274) decomposed these processes using selective facilitation to evaluate their unique priming contributions and factorial…

  14. Auditory Repetition Priming Is Impaired in Pure Alexic Patients

    Science.gov (United States)

    Swick, Diane; Miller, Kimberly M.; Larsen, Jary

    2004-01-01

    Alexia without agraphia, or ''pure'' alexia, is an acquired impairment in reading that leaves writing skills intact. Repetition priming for visually presented words is diminished in pure alexia. However, it is not possible to verify whether this priming deficit is modality-specific or modality independent because reading abilities are compromised.…

  15. Repetition priming-induced changes in sensorimotor transmission.

    Science.gov (United States)

    Svensson, Erik; Evans, Colin G; Cropper, Elizabeth C

    2016-03-01

    When a behavior is repeated performance often improves, i.e., repetition priming occurs. Although repetition priming is ubiquitous, mediating mechanisms are poorly understood. We address this issue in the feeding network ofAplysia Similar to the priming observed elsewhere, priming inAplysiais stimulus specific, i.e., it can be either "ingestive" or "egestive." Previous studies demonstrated that priming alters motor and premotor activity. Here we sought to determine whether sensorimotor transmission is also modified. We report that changes in sensorimotor transmission do occur. We ask how they are mediated and obtain data that strongly suggest a presynaptic mechanism that involves changes in the "background" intracellular Ca(2+)concentration ([Ca(2+)]i) in primary afferents themselves. This form of plasticity has previously been described and generated interest due to its potentially graded nature. Manipulations that alter the magnitude of the [Ca(2+)]iimpact the efficacy of synaptic transmission. It is, however, unclear how graded control is exerted under physiologically relevant conditions. In the feeding system changes in the background [Ca(2+)]iare mediated by the induction of a nifedipine-sensitive current. We demonstrate that the extent to which this current is induced is altered by peptides (i.e., increased by a peptide released during the repetition priming of ingestive activity and decreased by a peptide released during the repetition priming of egestive activity). We suggest that this constitutes a behaviorally relevant mechanism for the graded control of synaptic transmission via the regulation of the [Ca(2+)]iin a neuron.

  16. A Study on Repetition Techniques in Persian Morphology

    Directory of Open Access Journals (Sweden)

    a Vafaie

    2011-06-01

    Full Text Available The speakers of any language, according to their constant need, coin some novel words in order to convey meaning, express ideas, thoughts, and their desires. In this process, they take advantage of their overt or covert linguistic competence. For instance, the derivative feature of Arabic language has contributed a lot to speakers of that language to create so many words with multiple meanings, all formed on the same stem. Likewise, English speakers make use of the derivative features, compounding, blending, and multiple processes of their language to create words. Similarly, in Persian language, the speakers make new words based on specific features of that language. There are five common processes applied in Persian language to form new words, among which blending, compounding, derivation, repetition or reduplication, clipping and acronyms are frequently used and the other techniques or processes have been neglected. Word repetition is one of the word formation processes and many words are made through this process. This study is an attempt to delve into the morphological processes of word repetition in Persian contemporary language according to the texts of three books, “Imaginary Perspectives in Persian Poetry”, “Let’s Listen to the Speech” and “with Holleh Convoy”. In addition, it strives to find a proper solution to the question of the Persian word formation processes in creating new words through repetition.

  17. Do Stimulus-Action Associations Contribute to Repetition Priming?

    Science.gov (United States)

    Dennis, Ian; Perfect, Timothy J.

    2013-01-01

    Despite evidence that response learning makes a major contribution to repetition priming, the involvement of response representations at the level of motor actions remains uncertain. Levels of response representation were investigated in 4 experiments that used different tasks at priming and test. Priming for stimuli that required congruent…

  18. Processing Speaker Variability in Repetition and Semantic/Associative Priming

    Science.gov (United States)

    Lee, Chao-Yang; Zhang, Yu

    2015-01-01

    The effect of speaker variability on accessing the form and meaning of spoken words was evaluated in two short-term priming experiments. In the repetition priming experiment, participants listened to repeated or unrelated prime-target pairs, in which the prime and target were produced by the same speaker or different speakers. The results showed…

  19. Autism and exergaming: effects on repetitive behaviors and cognition.

    Science.gov (United States)

    Anderson-Hanley, Cay; Tureck, Kimberly; Schneiderman, Robyn L

    2011-01-01

    Autism is a neurodevelopmental disorder that leads to impairment in social skills and delay in language development, and results in repetitive behaviors and restricted interests that impede academic and social involvement. Physical exercise has been shown to decrease repetitive behaviors in autistic children and improve cognitive function across the life-span. Exergaming combines physical and mental exercise simultaneously by linking physical activity movements to video game control and may yield better compliance with exercise. In this investigation, two pilot studies explored the potential behavioral and cognitive benefits of exergaming. In Pilot I, twelve children with autism spectrum disorders completed a control task and an acute bout of Dance Dance Revolution (DDR); in Pilot II, ten additional youths completed an acute bout of cyber cycling. Repetitive behaviors and executive function were measured before and after each activity. Repetitive behaviors significantly decreased, while performance on Digits Backwards improved following the exergaming conditions compared with the control condition. Additional research is needed to replicate these findings, and to explore the application of exergaming for the management of behavioral disturbance and to increase cognitive control in children on the autism spectrum.

  20. Orientation-Invariant Object Recognition: Evidence from Repetition Blindness

    Science.gov (United States)

    Harris, Irina M.; Dux, Paul E.

    2005-01-01

    The question of whether object recognition is orientation-invariant or orientation-dependent was investigated using a repetition blindness (RB) paradigm. In RB, the second occurrence of a repeated stimulus is less likely to be reported, compared to the occurrence of a different stimulus, if it occurs within a short time of the first presentation.…

  1. Piriform spider silk sequences reveal unique repetitive elements.

    Science.gov (United States)

    Perry, David J; Bittencourt, Daniela; Siltberg-Liberles, Jessica; Rech, Elibio L; Lewis, Randolph V

    2010-11-08

    Orb-weaving spider silk fibers are assembled from very large, highly repetitive proteins. The repeated segments contain, in turn, short, simple, and repetitive amino acid motifs that account for the physical and mechanical properties of the assembled fiber. Of the six orb-weaver silk fibroins, the piriform silk that makes the attachment discs, which lashes the joints of the web and attaches dragline silk to surfaces, has not been previously characterized. Piriform silk protein cDNAs were isolated from phage libraries of three species: A. trifasciata , N. clavipes , and N. cruentata . The deduced amino acid sequences from these genes revealed two new repetitive motifs: an alternating proline motif, where every other amino acid is proline, and a glutamine-rich motif of 6-8 amino acids. Similar to other spider silk proteins, the repeated segments are large (>200 amino acids) and highly homogenized within a species. There is also substantial sequence similarity across the genes from the three species, with particular conservation of the repetitive motifs. Northern blot analysis revealed that the mRNA is larger than 11 kb and is expressed exclusively in the piriform glands of the spider. Phylogenetic analysis of the C-terminal regions of the new proteins with published spidroins robustly shows that the piriform sequences form an ortholog group.

  2. Focus on form through task repetition in TBLT

    NARCIS (Netherlands)

    van de Guchte, M.; Braaksma, M.; Rijlaarsdam, G.; Bimmel, P.

    2015-01-01

    Because there has been little research on focus on form during the post-task phase in task-based language teaching, this experimental study investigates the effects of task repetition after having directed learners’ attention to form during the main task. The study comprises two interventions, where

  3. The neurobiology of repetitive behavior: …and men

    NARCIS (Netherlands)

    Langen, Marieke; Durston, Sarah; Kas, Martien J H; van Engeland, Herman; Staal, Wouter G

    2011-01-01

    In young, typically developing children, repetitive behavior similar to that in certain neuropsychiatric syndromes is common. Whereas this behavior is adaptive in typical development, in many disorders it forms a core component of symptoms and causes prominent impairment in the daily life of affecte

  4. Spierbelasting en RSI [Muscle load and repetitive strain injury (RSI)

    NARCIS (Netherlands)

    Hoozemans, M.J.M.; Visser, B.; Huysmans, M.A.; Speklé, E.M.; Dieën, J.H. van

    2005-01-01

    This paper presents an overview of theories concerning the development of RSI (repetitive strain injury), related to muscle disorders. Movement is a noisy process. The level of noise is affected by factors such as fatigue and psychosocial stress. In order for precision movements to be made in such

  5. Use of Repetitive Transcranial Magnetic Stimulation for Treatment in Psychiatry

    NARCIS (Netherlands)

    Aleman, Andre

    The potential of noninvasive neurostimulation by repetitive transcranial magnetic stimulation (rTMS) for improving psychiatric disorders has been studied increasingly over the past two decades. This is especially the case for major depression and for auditory verbal hallucinations in schizophrenia.

  6. Practicing novel, praxis-like movements: physiological effects of repetition

    Directory of Open Access Journals (Sweden)

    Joshua Benjamin Ewen

    2016-02-01

    Full Text Available Our primary goal was to develop and validate a task that could provide evidence about how humans learn praxis gestures, such as those involving the use of tools. To that end, we created a video-based task in which subjects view a model performing novel, meaningless one-handed actions with kinematics similar to praxis gestures. Subjects then imitated the movements with their right hand. Trials were repeated 6 times to examine practice effects. EEG was recorded during the task. As a control, subjects watched videos of a model performing a well-established (over learned tool-use gesture. These gestures were also imitated 6 times. Demonstrating convergent validity, EEG measures of task-related cortical activation were similar in topography and frequency between the novel gesture task and the overlearned, praxis gesture task. As in studies assessing motor skill learning with simpler tasks, cortical activation during novel gesture learning decreased as the same gestures were repeated. In the control condition, repetition of overlearned tool-use gestures were also associated with reductions in activation, though to a lesser degree. Given that even overlearned, praxis gestures show constriction of EEG activity with repetition, it is possible that that attentional effects drive some of the repetition effects seen in EEG measures of activation during novel gesture repetition.

  7. Memory, emotion, and pupil diameter: Repetition of natural scenes.

    Science.gov (United States)

    Bradley, Margaret M; Lang, Peter J

    2015-09-01

    Recent studies have suggested that pupil diameter, like the "old-new" ERP, may be a measure of memory. Because the amplitude of the old-new ERP is enhanced for items encoded in the context of repetitions that are distributed (spaced), compared to massed (contiguous), we investigated whether pupil diameter is similarly sensitive to repetition. Emotional and neutral pictures of natural scenes were viewed once or repeated with massed (contiguous) or distributed (spaced) repetition during incidental free viewing and then tested on an explicit recognition test. Although an old-new difference in pupil diameter was found during successful recognition, pupil diameter was not enhanced for distributed, compared to massed, repetitions during either recognition or initial free viewing. Moreover, whereas a significant old-new difference was found for erotic scenes that had been seen only once during encoding, this difference was absent when erotic scenes were repeated. Taken together, the data suggest that pupil diameter is not a straightforward index of prior occurrence for natural scenes. © 2015 Society for Psychophysiological Research.

  8. Processing Speaker Variability in Repetition and Semantic/Associative Priming

    Science.gov (United States)

    Lee, Chao-Yang; Zhang, Yu

    2015-01-01

    The effect of speaker variability on accessing the form and meaning of spoken words was evaluated in two short-term priming experiments. In the repetition priming experiment, participants listened to repeated or unrelated prime-target pairs, in which the prime and target were produced by the same speaker or different speakers. The results showed…

  9. Do Stimulus-Action Associations Contribute to Repetition Priming?

    Science.gov (United States)

    Dennis, Ian; Perfect, Timothy J.

    2013-01-01

    Despite evidence that response learning makes a major contribution to repetition priming, the involvement of response representations at the level of motor actions remains uncertain. Levels of response representation were investigated in 4 experiments that used different tasks at priming and test. Priming for stimuli that required congruent…

  10. Generalised maximum entropy and heterogeneous technologies

    NARCIS (Netherlands)

    Oude Lansink, A.G.J.M.

    1999-01-01

    Generalised maximum entropy methods are used to estimate a dual model of production on panel data of Dutch cash crop farms over the period 1970-1992. The generalised maximum entropy approach allows a coherent system of input demand and output supply equations to be estimated for each farm in the sam

  11. 20 CFR 229.48 - Family maximum.

    Science.gov (United States)

    2010-04-01

    ... month on one person's earnings record is limited. This limited amount is called the family maximum. The family maximum used to adjust the social security overall minimum rate is based on the employee's Overall..., when any of the persons entitled to benefits on the insured individual's compensation would, except...

  12. The maximum rotation of a galactic disc

    NARCIS (Netherlands)

    Bottema, R

    1997-01-01

    The observed stellar velocity dispersions of galactic discs show that the maximum rotation of a disc is on average 63% of the observed maximum rotation. This criterion can, however, not be applied to small or low surface brightness (LSB) galaxies because such systems show, in general, a continuously

  13. Finite-Repetition threshold for infinite ternary words

    Directory of Open Access Journals (Sweden)

    Golnaz Badkobeh

    2011-08-01

    Full Text Available The exponent of a word is the ratio of its length over its smallest period. The repetitive threshold r(a of an a-letter alphabet is the smallest rational number for which there exists an infinite word whose finite factors have exponent at most r(a. This notion was introduced in 1972 by Dejean who gave the exact values of r(a for every alphabet size a as it has been eventually proved in 2009. The finite-repetition threshold for an a-letter alphabet refines the above notion. It is the smallest rational number FRt(a for which there exists an infinite word whose finite factors have exponent at most FRt(a and that contains a finite number of factors with exponent r(a. It is known from Shallit (2008 that FRt(2=7/3. With each finite-repetition threshold is associated the smallest number of r(a-exponent factors that can be found in the corresponding infinite word. It has been proved by Badkobeh and Crochemore (2010 that this number is 12 for infinite binary words whose maximal exponent is 7/3. We show that FRt(3=r(3=7/4 and that the bound is achieved with an infinite word containing only two 7/4-exponent words, the smallest number. Based on deep experiments we conjecture that FRt(4=r(4=7/5. The question remains open for alphabets with more than four letters. Keywords: combinatorics on words, repetition, repeat, word powers, word exponent, repetition threshold, pattern avoidability, word morphisms.

  14. Investigating repetition and change in musical rhythm by functional MRI.

    Science.gov (United States)

    Danielsen, A; Otnæss, M K; Jensen, J; Williams, S C R; Ostberg, B C

    2014-09-05

    Groove-based rhythm is a basic and much appreciated feature of Western popular music. It is commonly associated with dance, movement and pleasure and is characterized by the repetition of a basic rhythmic pattern. At various points in the musical course, drum breaks occur, representing a change compared to the repeated pattern of the groove. In the present experiment, we investigated the brain response to such drum breaks in a repetitive groove. Participants were scanned with functional magnetic resonance imaging (fMRI) while listening to a previously unheard naturalistic groove with drum breaks at uneven intervals. The rhythmic pattern and the timing of its different parts as performed were the only aspects that changed from the repetitive sections to the breaks. Differences in blood oxygen level-dependent activation were analyzed. In contrast to the repetitive parts, the drum breaks activated the left cerebellum, the right inferior frontal gyrus (RIFG), and the superior temporal gyri (STG) bilaterally. A tapping test using the same stimulus showed an increase in the standard deviation of inter-tap-intervals in the breaks versus the repetitive parts, indicating extra challenges for auditory-motor integration in the drum breaks. Both the RIFG and STG have been associated with structural irregularity and increase in musical-syntactical complexity in several earlier studies, whereas the left cerebellum is known to play a part in timing. Together these areas may be recruited in the breaks due to a prediction error process whereby the internal model is being updated. This concurs with previous research suggesting a network for predictive feed-forward control that comprises the cerebellum and the cortical areas that were activated in the breaks.

  15. Duality of Maximum Entropy and Minimum Divergence

    Directory of Open Access Journals (Sweden)

    Shinto Eguchi

    2014-06-01

    Full Text Available We discuss a special class of generalized divergence measures by the use of generator functions. Any divergence measure in the class is separated into the difference between cross and diagonal entropy. The diagonal entropy measure in the class associates with a model of maximum entropy distributions; the divergence measure leads to statistical estimation via minimization, for arbitrarily giving a statistical model. The dualistic relationship between the maximum entropy model and the minimum divergence estimation is explored in the framework of information geometry. The model of maximum entropy distributions is characterized to be totally geodesic with respect to the linear connection associated with the divergence. A natural extension for the classical theory for the maximum likelihood method under the maximum entropy model in terms of the Boltzmann-Gibbs-Shannon entropy is given. We discuss the duality in detail for Tsallis entropy as a typical example.

  16. Active power filter for harmonic compensation using a digital dual-mode-structure repetitive control approach

    DEFF Research Database (Denmark)

    Zou, Zhixiang; Wang, Zheng; Cheng, Ming;

    2012-01-01

    This paper presents an digital dual-mode-structure repetitive control approach for the single-phase shunt active power filter (APF), which aims to enhance the tracking ability and eliminate arbitrary order harmonic. The proposed repetitive control scheme blends the characteristics of both odd......-harmonic repetitive control and even-harmonic repetitive control. Moreover, the convergence rate is faster than conventional repetitive controller. Additionally, the parameters have been designed and optimized for the dual-mode structure repetitive control to improve the performance of APF system. Experimental...... results on a laboratory setup are given to verify the proposed control scheme....

  17. Comparison of methods to quantify volume during resistance exercise.

    Science.gov (United States)

    McBride, Jeffrey M; McCaulley, Grant O; Cormie, Prue; Nuzzo, James L; Cavill, Michael J; Triplett, N Travis

    2009-01-01

    The purpose of this investigation was to compare 4 different methods of calculating volume when comparing resistance exercise protocols of varying intensities. Ten Appalachian State University students experienced in resistance exercise completed 3 different resistance exercise protocols on different days using a randomized, crossover design, with 1 week of rest between each protocol. The protocols included 1) hypertrophy: 4 sets of 10 repetitions in the squat at 75% of a 1-repetition maximum (1RM) (90-second rest periods); 2) strength: 11 sets of 3 repetitions at 90% 1RM (5-minute rest periods); and 3) power: 8 sets of 6 repetitions of jump squats at 0% 1RM (3-minute rest periods). The volume of resistance exercise completed during each protocol was determined with 4 different methods: 1) volume load (VL) (repetitions [no.] x external load [kg]); 2) maximum dynamic strength volume load (MDSVL) (repetitions [no.] x [body mass--shank mass (kg) + external load (kg)]); 3) time under tension (TUT) (eccentric time +milliseconds] + concentric time +milliseconds]); and 4) total work (TW) (force [N] x displacement [m]). The volumes differed significantly (p , 0.05) between hypertrophy and strength in comparison with the power protocol when VL and MDSVL were used to determine the volume of resistance exercise completed. Furthermore, significant differences in TUT existed between all 3 resistance exercise protocols. The TW calculated was not significantly different between the 3 protocols. These data imply that each method examined results in substantially different values when comparing various resistance exercise protocols involving different levels of intensity.

  18. A New Revised DNA Cramp Tool Based Approach of Chopping DNA Repetitive and Non-Repetitive Genome Sequences

    Directory of Open Access Journals (Sweden)

    V.Hari Prasad

    2012-11-01

    Full Text Available In vogue tremendous amount of data generated day by day by the living organism of genetic sequences and its accumulation in database, their size is growing in an exponential manner. Due to excessive storage of DNA sequences in public databases like NCBI, EMBL and DDBJ archival maintenance is tedious task. Transmission of information from one place to another place in network management systems is also a critical task. So To improve the efficiency and to reduce the overhead of the database need of compression arises in database optimization. In this connection different techniques were bloomed, but achieved results are not bountiful. Many classical algorithms are fails to compress genetic sequences due to the specificity of text encoded in dna and few of the existing techniques achieved positive results. DNA is repetitive and non repetitive in nature. Our proposed technique DNACRAMP is applicable on repetitive and non repetitive sequences of dna and it yields better compression ratio in terms of bits per bases. This is compared with existing techniques and observed that our one is the optimum technique and compression results are on par with existing techniques.

  19. Laser-diode pumped self-mode-locked praseodymium visible lasers with multi-gigahertz repetition rate.

    Science.gov (United States)

    Zhang, Yuxia; Yu, Haohai; Zhang, Huaijin; Di Lieto, Alberto; Tonelli, Mauro; Wang, Jiyang

    2016-06-15

    We demonstrate efficient laser-diode pumped multi-gigahertz (GHz) self-mode-locked praseodymium (Pr3+) visible lasers with broadband spectra from green to deep red for the first time to our knowledge. With a Pr3+-doped GdLiF4 crystal, stable self-mode-locked visible pulsed lasers at the wavelengths of 522 nm, 607 nm, 639 nm, and 720 nm have been obtained with the repetition rates of 2.8 GHz, 3.1 GHz, 3.1 GHz, and 3.0 GHz, respectively. The maximum output power was 612 mW with the slope efficiency of 46.9% at 639 nm. The mode-locking mechanism was theoretically analyzed. The stable second-harmonic mode-locking with doubled repetition frequency was also realized based on the Fabry-Perot effect formed in the laser cavity. In addition, we find that the polarization directions were turned with lasing wavelengths. This work may provide a new way for generating efficient ultrafast pulses with high- and changeable-repetition rates in the visible range.

  20. Experience in resistance training does not prevent reduction in muscle strength evoked by passive static stretching.

    Science.gov (United States)

    Serra, Andrey J; Silva, José A; Marcolongo, Alessandra A; Manchini, Martha T; Oliveira, João V A; Santos, Luis F N; Rica, Roberta L; Bocalini, Danilo S

    2013-08-01

    This study examined whether passive static stretching reduces the maximum muscle strength achieved by different body segments in untrained and resistance-trained subjects. Twenty adult men were assigned to 1 of the following groups: untrained (UT, N = 9) and resistance-trained (RT, N = 11) groups. The subjects performed six 1 repetition maximum (1RM) load tests of the following exercises: horizontal bench press, lat pull-downs, bicep curls, and 45° leg press. The results achieved in the last two 1RM tests were used for statistical analyses. A passive static stretching program was incorporated before the sixth 1RM test. The body fat content was significantly higher in the UT group compared with the RT group (p stretching (p stretching program was detrimental to upper- and lower-body maximal muscle strength performance in several body segments. The negative effects of stretching were similar for subjects participating in resistance training regimens.

  1. Lactate and heart rate variability threshold during resistance exercise in the young and elderly.

    Science.gov (United States)

    Simões, R P; Castello-Simões, V; Mendes, R G; Archiza, B; Santos, D A; Machado, H G; Bonjorno, J C; Oliveira, C R; Reis, M S; Catai, A M; Arena, R; Borghi-Silva, A

    2013-11-01

    This purpose of this study was to: 1) determine the intensity corresponding to anaerobic threshold (AT) during a discontinuous resistance exercise protocol in healthy young and elderly subjects by analyzing heart rate variability (HRV) and blood lactate (BL) and 2) investigate the effect of aging on these variables. A total of 28 individuals, 14 young and 14 elderly healthy men underwent one-repetition maximum (1RM) testing to determine maximum load on the leg press. Discontinuous resistance exercise testing was initiated at 10% of the 1RM with subsequent increases of 10%. The load corresponding to AT was approximately 30% 1RM in both groups. The determination of AT by HRV was associated with BL responses (pelderly had lower values at loads below AT (pelderly subjects showed the lowest values (pelderly subjects. © Georg Thieme Verlag KG Stuttgart · New York.

  2. Deconstructing the power resistance relationship for squats: A joint-level analysis.

    Science.gov (United States)

    Farris, D J; Lichtwark, G A; Brown, N A T; Cresswell, A G

    2016-07-01

    Generating high leg power outputs is important for executing rapid movements. Squats are commonly used to increase leg strength and power. Therefore, it is useful to understand factors affecting power output in squatting. We aimed to deconstruct the mechanisms behind why power is maximized at certain resistances in squatting. Ten male rowers (age = 20 ± 2.2 years; height = 1.82 ± 0.03 m; mass = 86 ± 11 kg) performed maximal power squats with resistances ranging from body weight to 80% of their one repetition maximum (1RM). Three-dimensional kinematics was combined with ground reaction force (GRF) data in an inverse dynamics analysis to calculate leg joint moments and powers. System center of mass (COM) velocity and power were computed from GRF data. COM power was maximized across a range of resistances from 40% to 60% 1RM. This range was identified because a trade-off in hip and knee joint powers existed across this range, with maximal knee joint power occurring at 40% 1RM and maximal hip joint power at 60% 1RM. A non-linear system force-velocity relationship was observed that dictated large reductions in COM power below 20% 1RM and above 60% 1RM. These reductions were due to constraints on the control of the movement.

  3. 76 FR 44489 - Medical Devices; Neurological Devices; Classification of Repetitive Transcranial Magnetic...

    Science.gov (United States)

    2011-07-26

    ... transcranial magnetic stimulation (rTMS) system into class II (special controls). The Agency is classifying...; Classification of Repetitive Transcranial Magnetic Stimulation System AGENCY: Food and Drug Administration, HHS... entitled ``Class II Special Controls Guidance Document: Repetitive Transcranial Magnetic......

  4. A dual method for maximum entropy restoration

    Science.gov (United States)

    Smith, C. B.

    1979-01-01

    A simple iterative dual algorithm for maximum entropy image restoration is presented. The dual algorithm involves fewer parameters than conventional minimization in the image space. Minicomputer test results for Fourier synthesis with inadequate phantom data are given.

  5. Maximum Throughput in Multiple-Antenna Systems

    CERN Document Server

    Zamani, Mahdi

    2012-01-01

    The point-to-point multiple-antenna channel is investigated in uncorrelated block fading environment with Rayleigh distribution. The maximum throughput and maximum expected-rate of this channel are derived under the assumption that the transmitter is oblivious to the channel state information (CSI), however, the receiver has perfect CSI. First, we prove that in multiple-input single-output (MISO) channels, the optimum transmission strategy maximizing the throughput is to use all available antennas and perform equal power allocation with uncorrelated signals. Furthermore, to increase the expected-rate, multi-layer coding is applied. Analogously, we establish that sending uncorrelated signals and performing equal power allocation across all available antennas at each layer is optimum. A closed form expression for the maximum continuous-layer expected-rate of MISO channels is also obtained. Moreover, we investigate multiple-input multiple-output (MIMO) channels, and formulate the maximum throughput in the asympt...

  6. Photoemission spectromicroscopy with MAXIMUM at Wisconsin

    Energy Technology Data Exchange (ETDEWEB)

    Ng, W.; Ray-Chaudhuri, A.K.; Cole, R.K.; Wallace, J.; Crossley, S.; Crossley, D.; Chen, G.; Green, M.; Guo, J.; Hansen, R.W.C.; Cerrina, F.; Margaritondo, G. (Dept. of Electrical Engineering, Dept. of Physics and Synchrotron Radiation Center, Univ. of Wisconsin, Madison (USA)); Underwood, J.H.; Korthright, J.; Perera, R.C.C. (Center for X-ray Optics, Accelerator and Fusion Research Div., Lawrence Berkeley Lab., CA (USA))

    1990-06-01

    We describe the development of the scanning photoemission spectromicroscope MAXIMUM at the Wisoncsin Synchrotron Radiation Center, which uses radiation from a 30-period undulator. The article includes a discussion of the first tests after the initial commissioning. (orig.).

  7. Maximum-likelihood method in quantum estimation

    CERN Document Server

    Paris, M G A; Sacchi, M F

    2001-01-01

    The maximum-likelihood method for quantum estimation is reviewed and applied to the reconstruction of density matrix of spin and radiation as well as to the determination of several parameters of interest in quantum optics.

  8. The maximum entropy technique. System's statistical description

    CERN Document Server

    Belashev, B Z

    2002-01-01

    The maximum entropy technique (MENT) is applied for searching the distribution functions of physical values. MENT takes into consideration the demand of maximum entropy, the characteristics of the system and the connection conditions, naturally. It is allowed to apply MENT for statistical description of closed and open systems. The examples in which MENT had been used for the description of the equilibrium and nonequilibrium states and the states far from the thermodynamical equilibrium are considered

  9. 19 CFR 114.23 - Maximum period.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Maximum period. 114.23 Section 114.23 Customs... CARNETS Processing of Carnets § 114.23 Maximum period. (a) A.T.A. carnet. No A.T.A. carnet with a period of validity exceeding 1 year from date of issue shall be accepted. This period of validity cannot be...

  10. Maximum-Likelihood Detection Of Noncoherent CPM

    Science.gov (United States)

    Divsalar, Dariush; Simon, Marvin K.

    1993-01-01

    Simplified detectors proposed for use in maximum-likelihood-sequence detection of symbols in alphabet of size M transmitted by uncoded, full-response continuous phase modulation over radio channel with additive white Gaussian noise. Structures of receivers derived from particular interpretation of maximum-likelihood metrics. Receivers include front ends, structures of which depends only on M, analogous to those in receivers of coherent CPM. Parts of receivers following front ends have structures, complexity of which would depend on N.

  11. SEXUAL DIMORPHISM OF MAXIMUM FEMORAL LENGTH

    Directory of Open Access Journals (Sweden)

    Pandya A M

    2011-04-01

    Full Text Available Sexual identification from the skeletal parts has medico legal and anthropological importance. Present study aims to obtain values of maximum femoral length and to evaluate its possible usefulness in determining correct sexual identification. Study sample consisted of 184 dry, normal, adult, human femora (136 male & 48 female from skeletal collections of Anatomy department, M. P. Shah Medical College, Jamnagar, Gujarat. Maximum length of femur was considered as maximum vertical distance between upper end of head of femur and the lowest point on femoral condyle, measured with the osteometric board. Mean Values obtained were, 451.81 and 417.48 for right male and female, and 453.35 and 420.44 for left male and female respectively. Higher value in male was statistically highly significant (P< 0.001 on both sides. Demarking point (D.P. analysis of the data showed that right femora with maximum length more than 476.70 were definitely male and less than 379.99 were definitely female; while for left bones, femora with maximum length more than 484.49 were definitely male and less than 385.73 were definitely female. Maximum length identified 13.43% of right male femora, 4.35% of right female femora, 7.25% of left male femora and 8% of left female femora. [National J of Med Res 2011; 1(2.000: 67-70

  12. Repetitive motion planning and control of redundant robot manipulators

    CERN Document Server

    Zhang, Yunong

    2013-01-01

    Repetitive Motion Planning and Control of Redundant Robot Manipulators presents four typical motion planning schemes based on optimization techniques, including the fundamental RMP scheme and its extensions. These schemes are unified as quadratic programs (QPs), which are solved by neural networks or numerical algorithms. The RMP schemes are demonstrated effectively by the simulation results based on various robotic models; the experiments applying the fundamental RMP scheme to a physical robot manipulator are also presented. As the schemes and the corresponding solvers presented in the book have solved the non-repetitive motion problems existing in redundant robot manipulators, it is of particular use in applying theoretical research based on the quadratic program for redundant robot manipulators in industrial situations. This book will be a valuable reference work for engineers, researchers, advanced undergraduate and graduate students in robotics fields. Yunong Zhang is a professor at The School of Informa...

  13. Perseveration and other repetitive verbal behaviors: functional dissociations.

    Science.gov (United States)

    Christman, Sarah S; Boutsen, Frank R; Buckingham, Hugh W

    2004-11-01

    This article will review types of perseveration from a neurolinguistic perspective. During the course of the article, continuous, stuck-in-set, and recurrent perseveration will be placed in contradistinction to several other types of repetitive behaviors commonly associated with neurogenic communication disorders. These include echolalia in mixed transcortical aphasia; conduite d'approche and conduite d'ecart in fluent aphasias; lexical and nonlexical automatisms in nonfluent aphasias; palilalia in neuromotor disorders, such as Parkinson's disease (PD); and sound, syllable, word, and phrase repetitions in neurogenic stuttering. When differentiating these phenomena from perseveration, it is helpful to consider the salient factors that condition observed behaviors in individual patients, such as overall speech fluency, inventory of available utterances, nature of eliciting tasks, and propositionality of responses. Information such as communication disorder diagnosis, underlying etiology, and known sites of lesion from each patient's total clinical profile may also assist with differentiation.

  14. Fine tuning of micropillar cavity modes through repetitive oxidations

    CERN Document Server

    Bakker, Morten P; Snijders, Henk; Truong, Tuan-Ahn; Petroff, Pierre M; Bouwmeester, Dirk; van Exter, Martin P

    2013-01-01

    Repetitive wet thermal oxidations of a tapered oxide aperture in a micropillar structure are demonstrated. After each oxidation step the con?fined optical modes are analyzed at room temperature. Three regimes are identi?fied. First, the optical con?finement increases when the aperture oxidizes towards the center. Then, the cavity modes shift by more than 30 nm, when the taper starts to oxidize through the center, leading to a decrease in the optical path length. Finally, the resonance frequency levels o?f, when the aperture is oxidized all the way through the micropillar, but confi?ned optical modes with a high quality factor remain. This repetitive oxidation technique therefore enables precise control of the optical cavity volume or wavelength.

  15. Interaction of Repetitively Pulsed High Energy Laser Radiation With Matter

    Science.gov (United States)

    Hugenschmidt, Manfred

    1986-10-01

    The paper is concerned with laser target interaction processes involving new methods of improving the overall energy balance. As expected theoretically, this can be achieved with high repetition rate pulsed lasers even for initially highly reflecting materials, such as metals. Experiments were performed by using a pulsed CO2 laser at mean powers up to 2 kW and repetition rates up to 100 Hz. The rates of temperature rise of aluminium for example were thereby increased by lore than a factor of 3 as compared to cw-radiation of comparable power density. Similar improvements were found for the overall absorptivities that were increased by this method by more than an order of magnitude.

  16. Skill learning and repetition priming in Alzheimer's disease.

    Science.gov (United States)

    Grober, E; Ausubel, R; Sliwinski, M; Gordon, B

    1992-10-01

    While perceptual-motor learning occurs normally in Alzheimer's disease (AD) patients, their ability to acquire the skill of reading transformed text has not been well delineated. AD patients and matched controls were timed as they read two blocks of words presented in mirror image. Control subjects displayed both skill learning and repetition priming, whereas AD patients displayed only repetition priming. Skill learning in AD patients was associated with their ability to complete verbal analogies. They displayed the expected impairment in recognition for the words from the mirror reading task. The failure of AD patients to acquire the mirror reading skill can be understood through a task analysis and may reflect an underlying deficit in abstract reasoning that precludes the development of appropriate pattern analyzing strategies needed to transform rotated text.

  17. Scan patterns when viewing natural scenes: emotion, complexity, and repetition.

    Science.gov (United States)

    Bradley, Margaret M; Houbova, Petra; Miccoli, Laura; Costa, Vincent D; Lang, Peter J

    2011-11-01

    Eye movements were monitored during picture viewing, and effects of hedonic content, perceptual composition, and repetition on scanning assessed. In Experiment 1, emotional and neutral pictures that were figure-ground compositions or more complex scenes were presented for a 6-s free viewing period. Viewing emotional pictures or complex scenes prompted more fixations and broader scanning of the visual array, compared to neutral pictures or simple figure-ground compositions. Effects of emotion and composition were independent, supporting the hypothesis that these oculomotor indices reflect enhanced information seeking. Experiment 2 tested an orienting hypothesis by repeatedly presenting the same pictures. Although repetition altered specific scan patterns, emotional, compared to neutral, picture viewing continued to prompt oculomotor differences, suggesting that motivationally relevant cues enhance information seeking in appetitive and defensive contexts. Copyright © 2011 Society for Psychophysiological Research.

  18. Repetitive transients extraction algorithm for detecting bearing faults

    Science.gov (United States)

    He, Wangpeng; Ding, Yin; Zi, Yanyang; Selesnick, Ivan W.

    2017-02-01

    Rolling-element bearing vibrations are random cyclostationary. This paper addresses the problem of noise reduction with simultaneous components extraction in vibration signals for faults diagnosis of bearing. The observed vibration signal is modeled as a summation of two components contaminated by noise, and each component composes of repetitive transients. To extract the two components simultaneously, an approach by solving an optimization problem is proposed in this paper. The problem adopts convex sparsity-based regularization scheme for decomposition, and non-convex regularization is used to further promote the sparsity but preserving the global convexity. A synthetic example is presented to illustrate the performance of the proposed approach for repetitive feature extraction. The performance and effectiveness of the proposed method are further demonstrated by applying to compound faults and single fault diagnosis of a locomotive bearing. The results show the proposed approach can effectively extract the features of outer and inner race defects.

  19. Improved Discrimination of Visual Stimuli Following Repetitive Transcranial Magnetic Stimulation

    OpenAIRE

    Waterston, Michael L.; Pack, Christopher C.

    2010-01-01

    BACKGROUND: Repetitive transcranial magnetic stimulation (rTMS) at certain frequencies increases thresholds for motor-evoked potentials and phosphenes following stimulation of cortex. Consequently rTMS is often assumed to introduce a "virtual lesion" in stimulated brain regions, with correspondingly diminished behavioral performance. METHODOLOGY/PRINCIPAL FINDINGS: Here we investigated the effects of rTMS to visual cortex on subjects' ability to perform visual psychophysical tasks. Contrary t...

  20. Striatal development in autism: repetitive behaviors and the reward circuitry

    OpenAIRE

    Kohls, Gregor; Yerys, Benjamin; Schultz, Robert T

    2014-01-01

    Autism spectrum disorder (ASD) is defined by two essential features – impaired social communication abilities, including deficits with social reciprocity, nonverbal communication and establishing relationships, and by the presence of restricted and repetitive behaviors and interests (RRBIs). Social deficits get the majority of attention both in science and in the popular media, but RRBIs are equally important in understanding autism. Although RRBIs are also seen in typically...

  1. Illusory sensation of movement induced by repetitive transcranial magnetic stimulation

    OpenAIRE

    Mark Schram Christensen; Jesper Lundbye-Jensen; Michael James Grey; Alexandra Damgaard Vejlby; Bo Belhage; Jens Bo Nielsen

    2010-01-01

    Human movement sense relies on both somatosensory feedback and on knowledge of the motor commands used to produce the movement. We have induced a movement illusion using repetitive transcranial magnetic stimulation over primary motor cortex and dorsal premotor cortex in the absence of limb movement and its associated somatosensory feedback. Afferent and efferent neural signalling was abolished in the arm with ischemic nerve block, and in the leg with spinal nerve block. Movement sensation was...

  2. Scan patterns when viewing natural scenes: Emotion, complexity, and repetition

    OpenAIRE

    Bradley, Margaret M.; Houbova, Petra; Miccoli,Laura; Costa, Vincent D.; Lang, Peter J.

    2011-01-01

    Eye movements were monitored during picture viewing and effects of hedonic content, perceptual composition, and repetition on scanning assessed. In Experiment 1, emotional and neutral pictures that were figure-ground compositions or more complex scenes were presented for a 6 s free viewing period. Viewing emotional pictures or complex scenes prompted more fixations and broader scanning of the visual array, compared to neutral pictures or simple figure-ground compositions. Effects of emotion a...

  3. Route to 100 TW Ti: Sapphire laser at repetitive mode

    Directory of Open Access Journals (Sweden)

    Teng Hao

    2013-11-01

    Full Text Available We demonstrated a 100 TW-class femtosecond Ti: sapphire laser running at repetition rate of 0.1 Hz by adding a stage amplifier in the 20 TW/10 Hz laser facility (XL-II. Pumping the new stage amplifier with the 25 J green Nd:glass laser, we successfully upgraded the laser energy to 3.4 J with duration of 29 fs, corresponding to a peak power of 117 TW.

  4. Don't Throw out the Baby with the Bathwater: Verbal Repetition, Mnemonics, and Active Learning

    Science.gov (United States)

    Saber, Jane Lee; Johnson, Richard D.

    2008-01-01

    The effectiveness of using verbal repetition and first-letter acronyms to teach a common marketing framework was examined in two experiments. In Experiment 1, 345 undergraduate students were exposed to the framework using one of four conditions: control, verbal repetition, acronym, and verbal repetition plus acronym in a traditional learning…

  5. Examining Restricted and Repetitive Behaviors in Young Children with Autism Spectrum Disorder during Two Observational Contexts

    Science.gov (United States)

    Stronach, Sheri; Wetherby, Amy M.

    2014-01-01

    This prospective study of the FIRST WORDS® Project examined restricted and repetitive behaviors in a sample of 55 toddlers at a mean age of 20 months who were later diagnosed with autism spectrum disorder. Restricted and repetitive behaviors were coded using the Repetitive Movement and Restricted Interest Scales in two video-recorded observation…

  6. Characterizing Caregiver Responses to Restricted and Repetitive Behaviors in Toddlers with Autism Spectrum Disorder

    Science.gov (United States)

    Harrop, Clare; Gulsrud, Amanda; Shih, Wendy; Hovsepyan, Lilit; Kasari, Connie

    2016-01-01

    Restricted and repetitive behaviors are a core feature of autism spectrum disorder. This descriptive study documented the presence of restricted and repetitive behaviors in 85 toddlers with autism spectrum disorder as they interacted with their caregiver in a play interaction. For each child restricted and repetitive behavior, a caregiver…

  7. On the repetitive operation of a self-switched transversely excited atmosphere CO2 laser

    Indian Academy of Sciences (India)

    Pallavi Raote; Gautam Patil; J Padma Nilaya; D J Biswas

    2010-11-01

    The repetition rate capability of self-switched transversely excited atmosphere (TEA) CO2 laser was studied for different gas flow configurations. For an optimized gas flow configuration, repetitive operation was achieved at a much smaller gas replenishment factor between two successive pulses when compared with repetitive systems energized by conventional pulsers.

  8. Effects of Material Emotional Valence on the Time Course of Massive Repetition Priming

    Science.gov (United States)

    Hu, Zhiguo; Liu, Hongyan; Zhang, John X.

    2010-01-01

    Learning through repetition is a fundamental form and also an effective method of language learning critical for achieving proficient and automatic language use. Massive repetition priming as a common research paradigm taps into the dynamic processes involved in repetition learning. Research with this paradigm has so far used only emotionally…

  9. FBFN-based adaptive repetitive control of nonlinearly parameterized systems

    Institute of Scientific and Technical Information of China (English)

    Wenli Sun; Hong Cai; Fu Zhao

    2013-01-01

    An adaptive repetitive control scheme is presented for a class of nonlinearly parameterized systems based on the fuzzy ba-sis function network (FBFN). The parameters of the fuzzy rules are tuned with adaptive schemes. To attenuate chattering effectively, the discontinuous control term is approximated by an adaptive PI control structure. The bound of the discontinuous control term is assumed to be unknown and estimated by an adaptive mecha-nism. Based on the Lyapunov stability theory, an adaptive repeti-tive control law is proposed to guarantee the closed-loop stability and the tracking performance. By means of FBFNs, which avoid the nonlinear parameterization from entering into the adaptive repetitive control, the control er singularity problem is solved. The proposed approach does not require an exact structure of the sys-tem dynamics, and the proposed control er is utilized to control a model of permanent-magnet linear synchronous motor subject to significant disturbances and parameter uncertainties. The simula-tion results demonstrate the effectiveness of the proposed method.

  10. A referential theory of the repetition-induced truth effect.

    Science.gov (United States)

    Unkelbach, Christian; Rom, Sarah C

    2017-03-01

    People are more likely to judge repeated statements as true compared to new statements, a phenomenon known as the illusory truth effect. The currently dominant explanation is an increase in processing fluency caused by prior presentation. We present a new theory to explain this effect. We assume that people judge truth based on coherent references for statements in memory. Due to prior presentation, repeated statements have more coherently linked references; thus, a repetition-induced truth effect follows. Five experiments test this theory. Experiment 1-3 show that both the amount and the coherence of references for a repeated statement influence judged truth. Experiment 4 shows that people also judge new statements more likely "true" when they share references with previously presented statements. Experiment 5 realizes theoretically predicted conditions under which repetition should not influence judged truth. Based on these data, we discuss how the theory relates to other explanations of repetition-induced truth and how it may integrate other truth-related phenomena and belief biases. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Illusory sensation of movement induced by repetitive transcranial magnetic stimulation.

    Directory of Open Access Journals (Sweden)

    Mark Schram Christensen

    Full Text Available Human movement sense relies on both somatosensory feedback and on knowledge of the motor commands used to produce the movement. We have induced a movement illusion using repetitive transcranial magnetic stimulation over primary motor cortex and dorsal premotor cortex in the absence of limb movement and its associated somatosensory feedback. Afferent and efferent neural signalling was abolished in the arm with ischemic nerve block, and in the leg with spinal nerve block. Movement sensation was assessed following trains of high-frequency repetitive transcranial magnetic stimulation applied over primary motor cortex, dorsal premotor cortex, and a control area (posterior parietal cortex. Magnetic stimulation over primary motor cortex and dorsal premotor cortex produced a movement sensation that was significantly greater than stimulation over the control region. Movement sensation after dorsal premotor cortex stimulation was less affected by sensory and motor deprivation than was primary motor cortex stimulation. We propose that repetitive transcranial magnetic stimulation over dorsal premotor cortex produces a corollary discharge that is perceived as movement.

  12. Route Repetition and Route Retracing: Effects of Cognitive Aging

    Directory of Open Access Journals (Sweden)

    Jan Malte Wiener

    2012-05-01

    Full Text Available Retracing a recently traveled route is a frequent navigation task when learning novel routes or exploring unfamiliar environments. In the present study we utilized virtual environments technology to investigate age-related differences in repeating and retracing a learned route. In the training phase of the experiment participants were guided along a route consisting of multiple intersections each featuring one unique landmark. In the subsequent test phase, they were guided along short sections of the route and asked to indicate overall travel direction (repetition or retracing, the direction required to continue along the route, and the next landmark they would encounter. Results demonstrate age-related deficits in all three tasks. More specifically, in contrast to younger participants, the older participants had greater problems during route retracing than during route repetition. While route repetition can be solved with egocentric response or route strategies, successfully retracing a route requires allocentric processing. The age-related deficits in route retracing are discussed in the context of impaired allocentric processing and shifts from allocentric to egocentric navigation strategies as a consequence of age-related hippocampal degeneration.

  13. Repetitive motor behavior: further characterization of development and temporal dynamics.

    Science.gov (United States)

    Muehlmann, Amber M; Bliznyuk, Nikolay; Duerr, Isaac; Lewis, Mark H

    2015-03-01

    Repetitive behaviors are diagnostic for autism spectrum disorders, common in related neurodevelopmental disorders, and normative in typical development. In order to identify factors that mediate repetitive behavior development, it is necessary to characterize the expression of these behaviors from an early age. Extending previous findings, we characterized further the ontogeny of stereotyped motor behavior both in terms of frequency and temporal organization in deer mice. A three group trajectory model provided a good fit to the frequencies of stereotyped behavior across eight developmental time points. Group based trajectory analysis using a measure of temporal organization of stereotyped behavior also resulted in a three group solution. Additionally, as the frequency of stereotyped behavior increased with age, the temporal distribution of stereotyped responses became increasingly regular or organized indicating a strong association between these measures. Classification tree and principal components analysis showed that accurate classification of trajectory group could be done with fewer observations. This ability to identify trajectory group membership earlier in development allows for examination of a wide range of variables, both experiential and biological, to determine their impact on altering the expected trajectory of repetitive behavior across development. Such studies would have important implications for treatment efforts in neurodevelopmental disorders such as autism.

  14. Repetition suppression: a means to index neural representations using BOLD?

    Science.gov (United States)

    Behrens, Timothy E. J.

    2016-01-01

    Understanding how the human brain gives rise to complex cognitive processes remains one of the biggest challenges of contemporary neuroscience. While invasive recording in animal models can provide insight into neural processes that are conserved across species, our understanding of cognition more broadly relies upon investigation of the human brain itself. There is therefore an imperative to establish non-invasive tools that allow human brain activity to be measured at high spatial and temporal resolution. In recent years, various attempts have been made to refine the coarse signal available in functional magnetic resonance imaging (fMRI), providing a means to investigate neural activity at the meso-scale, i.e. at the level of neural populations. The most widely used techniques include repetition suppression and multivariate pattern analysis. Human neuroscience can now use these techniques to investigate how representations are encoded across neural populations and transformed by relevant computations. Here, we review the physiological basis, applications and limitations of fMRI repetition suppression with a brief comparison to multivariate techniques. By doing so, we show how fMRI repetition suppression holds promise as a tool to reveal complex neural mechanisms that underlie human cognitive function. This article is part of the themed issue ‘Interpreting BOLD: a dialogue between cognitive and cellular neuroscience’. PMID:27574308

  15. The correlation between the length of repetitive domain and mechanical properties of the recombinant flagelliform spidroin

    Directory of Open Access Journals (Sweden)

    Xue Li

    2017-03-01

    Full Text Available Spider silk is an attractive biopolymer with numerous potential applications due to its remarkable characteristics. Among the six categories of spider silks, flagelliform (Flag spider silk possesses longer and more repetitive core domains than others, therefore performing the highest extensibility. To investigate the correlation between the recombinant spidroin size and the synthetic fiber properties, four recombinant proteins with different sizes [N-Scn-C (n=1-4] were constructed and expressed using IMPACT system. Subsequently, different recombinant spidroins were spun into fibers through wet-spinning via a custom-made continuous post-drawing device. Mechanical tests of the synthetic fibers with four parameters (maximum stress, maximum extension, Young's modulus and toughness demonstrated that the extensibility of the fibers showed a positive correlation with spidroin size, consequently resulting in the extensibility of N-Sc4-C fiber ranked the highest (58.76% among four fibers. Raman data revealed the relationship between secondary structure content and mechanical properties. The data here provide a deeper insight into the relationship between the function and structure of Flag silk for future design of artificial fibers.

  16. The maximum rotation of a galactic disc

    CERN Document Server

    Bottema, R

    1997-01-01

    The observed stellar velocity dispersions of galactic discs show that the maximum rotation of a disc is on average 63% of the observed maximum rotation. This criterion can, however, not be applied to small or low surface brightness (LSB) galaxies because such systems show, in general, a continuously rising rotation curve until the outermost measured radial position. That is why a general relation has been derived, giving the maximum rotation for a disc depending on the luminosity, surface brightness, and colour of the disc. As a physical basis of this relation serves an adopted fixed mass-to-light ratio as a function of colour. That functionality is consistent with results from population synthesis models and its absolute value is determined from the observed stellar velocity dispersions. The derived maximum disc rotation is compared with a number of observed maximum rotations, clearly demonstrating the need for appreciable amounts of dark matter in the disc region and even more so for LSB galaxies. Matters h...

  17. Maximum permissible voltage of YBCO coated conductors

    Science.gov (United States)

    Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z.; Hong, Z.; Wang, D.; Zhou, H.; Shen, X.; Shen, C.

    2014-06-01

    Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (Ic) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the Ic degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.

  18. Computing Rooted and Unrooted Maximum Consistent Supertrees

    CERN Document Server

    van Iersel, Leo

    2009-01-01

    A chief problem in phylogenetics and database theory is the computation of a maximum consistent tree from a set of rooted or unrooted trees. A standard input are triplets, rooted binary trees on three leaves, or quartets, unrooted binary trees on four leaves. We give exact algorithms constructing rooted and unrooted maximum consistent supertrees in time O(2^n n^5 m^2 log(m)) for a set of m triplets (quartets), each one distinctly leaf-labeled by some subset of n labels. The algorithms extend to weighted triplets (quartets). We further present fast exact algorithms for constructing rooted and unrooted maximum consistent trees in polynomial space. Finally, for a set T of m rooted or unrooted trees with maximum degree D and distinctly leaf-labeled by some subset of a set L of n labels, we compute, in O(2^{mD} n^m m^5 n^6 log(m)) time, a tree distinctly leaf-labeled by a maximum-size subset X of L that all trees in T, when restricted to X, are consistent with.

  19. Maximum magnitude earthquakes induced by fluid injection

    Science.gov (United States)

    McGarr, Arthur F.

    2014-01-01

    Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.

  20. Maximum magnitude earthquakes induced by fluid injection

    Science.gov (United States)

    McGarr, A.

    2014-02-01

    Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.

  1. The acute effect of upper-body complex training on power output of martial art athletes as measured by the bench press throw exercise.

    Science.gov (United States)

    Liossis, Loudovikos Dimitrios; Forsyth, Jacky; Liossis, Ceorge; Tsolakis, Charilaos

    2013-12-18

    The purpose of this study was to examine the acute effect of upper body complex training on power output, as well as to determine the requisite preload intensity and intra-complex recovery interval needed to induce power output increases. Nine amateur-level combat/martial art athletes completed four distinct experimental protocols, which consisted of 5 bench press repetitions at either: 65% of one-repetition maximum (1RM) with a 4 min rest interval; 65% of 1RM with an 8 min rest; 85% of 1RM with a 4 min rest; or 85% of 1RM with an 8 min rest interval, performed on different days. Before (pre-conditioning) and after (post-conditioning) each experimental protocol, three bench press throws at 30% of 1RM were performed. Significant differences in power output pre-post conditioning were observed across all experimental protocols (F=26.489, partial eta2=0.768, p=0.001). Mean power output significantly increased when the preload stimulus of 65% 1RM was matched with 4 min of rest (p=0.001), and when the 85% 1RM preload stimulus was matched with 8 min of rest (p=0.001). Moreover, a statistically significant difference in power output was observed between the four conditioning protocols (F= 21.101, partial eta(2)=0.913, p=0.001). It was concluded that, in complex training, matching a heavy preload stimulus with a longer rest interval, and a lighter preload stimulus with a shorter rest interval is important for athletes wishing to increase their power production before training or competition.

  2. Maximum Multiflow in Wireless Network Coding

    CERN Document Server

    Zhou, Jin-Yi; Jiang, Yong; Zheng, Hai-Tao

    2012-01-01

    In a multihop wireless network, wireless interference is crucial to the maximum multiflow (MMF) problem, which studies the maximum throughput between multiple pairs of sources and sinks. In this paper, we observe that network coding could help to decrease the impacts of wireless interference, and propose a framework to study the MMF problem for multihop wireless networks with network coding. Firstly, a network model is set up to describe the new conflict relations modified by network coding. Then, we formulate a linear programming problem to compute the maximum throughput and show its superiority over one in networks without coding. Finally, the MMF problem in wireless network coding is shown to be NP-hard and a polynomial approximation algorithm is proposed.

  3. The Wiener maximum quadratic assignment problem

    CERN Document Server

    Cela, Eranda; Woeginger, Gerhard J

    2011-01-01

    We investigate a special case of the maximum quadratic assignment problem where one matrix is a product matrix and the other matrix is the distance matrix of a one-dimensional point set. We show that this special case, which we call the Wiener maximum quadratic assignment problem, is NP-hard in the ordinary sense and solvable in pseudo-polynomial time. Our approach also yields a polynomial time solution for the following problem from chemical graph theory: Find a tree that maximizes the Wiener index among all trees with a prescribed degree sequence. This settles an open problem from the literature.

  4. Maximum confidence measurements via probabilistic quantum cloning

    Institute of Scientific and Technical Information of China (English)

    Zhang Wen-Hai; Yu Long-Bao; Cao Zhuo-Liang; Ye Liu

    2013-01-01

    Probabilistic quantum cloning (PQC) cannot copy a set of linearly dependent quantum states.In this paper,we show that if incorrect copies are allowed to be produced,linearly dependent quantum states may also be cloned by the PQC.By exploiting this kind of PQC to clone a special set of three linearly dependent quantum states,we derive the upper bound of the maximum confidence measure of a set.An explicit transformation of the maximum confidence measure is presented.

  5. Maximum floodflows in the conterminous United States

    Science.gov (United States)

    Crippen, John R.; Bue, Conrad D.

    1977-01-01

    Peak floodflows from thousands of observation sites within the conterminous United States were studied to provide a guide for estimating potential maximum floodflows. Data were selected from 883 sites with drainage areas of less than 10,000 square miles (25,900 square kilometers) and were grouped into regional sets. Outstanding floods for each region were plotted on graphs, and envelope curves were computed that offer reasonable limits for estimates of maximum floods. The curves indicate that floods may occur that are two to three times greater than those known for most streams.

  6. Revealing the Maximum Strength in Nanotwinned Copper

    DEFF Research Database (Denmark)

    Lu, L.; Chen, X.; Huang, Xiaoxu

    2009-01-01

    The strength of polycrystalline materials increases with decreasing grain size. Below a critical size, smaller grains might lead to softening, as suggested by atomistic simulations. The strongest size should arise at a transition in deformation mechanism from lattice dislocation activities to grain...... boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...

  7. The Maximum Resource Bin Packing Problem

    DEFF Research Database (Denmark)

    Boyar, J.; Epstein, L.; Favrholdt, L.M.

    2006-01-01

    Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find...

  8. Maximum entropy analysis of EGRET data

    DEFF Research Database (Denmark)

    Pohl, M.; Strong, A.W.

    1997-01-01

    EGRET data are usually analysed on the basis of the Maximum-Likelihood method \\cite{ma96} in a search for point sources in excess to a model for the background radiation (e.g. \\cite{hu97}). This method depends strongly on the quality of the background model, and thus may have high systematic unce...... uncertainties in region of strong and uncertain background like the Galactic Center region. Here we show images of such regions obtained by the quantified Maximum-Entropy method. We also discuss a possible further use of MEM in the analysis of problematic regions of the sky....

  9. Revealing the Maximum Strength in Nanotwinned Copper

    DEFF Research Database (Denmark)

    Lu, L.; Chen, X.; Huang, Xiaoxu

    2009-01-01

    The strength of polycrystalline materials increases with decreasing grain size. Below a critical size, smaller grains might lead to softening, as suggested by atomistic simulations. The strongest size should arise at a transition in deformation mechanism from lattice dislocation activities to grain...... boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...

  10. Maximum phytoplankton concentrations in the sea

    DEFF Research Database (Denmark)

    Jackson, G.A.; Kiørboe, Thomas

    2008-01-01

    A simplification of plankton dynamics using coagulation theory provides predictions of the maximum algal concentration sustainable in aquatic systems. These predictions have previously been tested successfully against results from iron fertilization experiments. We extend the test to data collected...... in the North Atlantic as part of the Bermuda Atlantic Time Series program as well as data collected off Southern California as part of the Southern California Bight Study program. The observed maximum particulate organic carbon and volumetric particle concentrations are consistent with the predictions...

  11. Assessing maladaptive repetitive thought in clinical disorders: A critical review of existing measures.

    Science.gov (United States)

    Samtani, Suraj; Moulds, Michelle L

    2017-04-01

    Rumination and worry have recently been grouped under the broader transdiagnostic construct of repetitive thought (Watkins, 2008). The purpose of this review is to provide an overview of scales used to assess repetitive thinking across a broad range of contexts: depression, anxiety, trauma, stress, illness, interpersonal difficulties, positive affect, and so forth. We also include scales developed or adapted for children and adolescents. In the extant literature, measures of repetitive thinking generally show small-to-moderate correlations with measures of psychopathology. This review highlights problems with the content validity of existing instruments; for example, confounds between repetitive thought and symptomatology, metacognitive beliefs, and affect. This review also builds on previous reviews by including newer transdiagnostic measures of repetitive thinking. We hope that this review will help to expand our understanding of repetitive thinking beyond the mood and anxiety disorders, and suggest ways forward in the measurement of repetitive thinking in individuals with comorbid conditions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Impact of external resistance and maximal effort on force-velocity characteristics of the knee extensors during strengthening exercise: a randomized controlled experiment.

    Science.gov (United States)

    Van Roie, Evelien; Bautmans, Ivan; Boonen, Steven; Coudyzer, Walter; Kennis, Eva; Delecluse, Christophe

    2013-04-01

    It remains controversial whether maximal effort attained by high external resistance is required to optimize muscle adaptation to strengthening exercise. Here, we compared different training protocols reaching maximal effort with either high-resistance (HImax, 80% of 1-repetition maximum [1RM]) or low-resistance (LOmax, ≤40% 1RM). Thirty-six young volunteers were randomly assigned to 9 weeks of leg extension training at either HImax (1 set of 10-12 repetitions at 80% 1RM), LO (1 set of 10-12 repetitions at 40% 1RM, no maximal effort), or LOmax (1 set of 10-12 repetitions at 40% 1RM, preceded [no rest] by 60 repetitions at 20-25% 1RM). Knee extension 1RM was measured preintervention and postintervention and before the 7th, 13th, and 19th training sessions. Preintervention and postintervention, knee extensor static (PTstat) and dynamic (PTdyn) peak torque, maximal work (MW), and speed of movement at 20% (S20), 40% (S40), and 60% (S60) of PTstat were recorded with a Biodex dynamometer. All the groups showed a significant increase in 1RM, with a greater improvement in HImax from the 13th session on (p < 0.05). The HImax was the only group that significantly increased PTstat (+7.4 ± 8.1%, p = 0.01). The LOmax showed a significantly greater increase in S20 (+6.0 ± 3.2%), PTdyn (+9.8 ± 5.6%), and MW (+15.1 ± 10.6%) than both HImax and LO (p = 0.044 for S20, p = 0.030 for PTdyn, p = 0.025 for MW) and was the only group that increased in S40 (+7.7 ± 9.7%, p = 0.032). In conclusion, significant differences between HImax and LOmax on force-velocity characteristics of the knee extensors were found, although maximal effort was achieved in both training regimens. Thus, LOmax may not be considered as a replacement for HImax but rather as an alternative with different training-specific adaptations.

  13. Comparison of the Effects of Resistance Exercise Orders on Number of Repetitions, Serum IGF-1, Testosterone and Cortisol Levels in Normal-Weight and Obese Men

    Directory of Open Access Journals (Sweden)

    Sheikholeslami-Vatani

    2016-03-01

    Full Text Available Background Exercise order affects repetition performance and acute hormonal responses to resistance training (RT programs. Objectives The purpose of this study was to compare the acute effects of two different resistance exercise orders (REO on number of repetitions and serum Insulin-like Growth Factor-1 (IGF-1, testosterone and cortisol levels in normal-weight and obese men. Materials and Methods 25 untrained college-aged men were assigned to either obese (n = 11 or normal-weight (n = 15 groups. Subjects performed two REO protocols in 2 exercise groups. In the first group subjects began with large-muscle group and progressed to small-muscle group (Protocol A, while in the other group subjects performed the same exercise but in reverse sequence (Protocol B. Each activity was performed in 3 consecutive sets of 10 repetitions maximum to near fatigue. Results REOs did not affect number of repetitions in none of the groups. The average rating of perceived exertion was higher for protocol B in both groups. IGF-1 and testosterone increased immediately post exercise for both protocols and in both groups, however immediately post exercise increase in IGF-1 and testosterone were lower in obese group. Cortisol response to REO was weaker in obese group. Conclusions Performing large muscle group exercises first in RE training and progressing to small muscle group produced greater anabolic hormonal response relative to reverse sequence in normal-weight young adult men. Anabolic hormonal response to REOs was blunted in the obese group.

  14. Analysis of Photovoltaic Maximum Power Point Trackers

    Science.gov (United States)

    Veerachary, Mummadi

    The photovoltaic generator exhibits a non-linear i-v characteristic and its maximum power point (MPP) varies with solar insolation. An intermediate switch-mode dc-dc converter is required to extract maximum power from the photovoltaic array. In this paper buck, boost and buck-boost topologies are considered and a detailed mathematical analysis, both for continuous and discontinuous inductor current operation, is given for MPP operation. The conditions on the connected load values and duty ratio are derived for achieving the satisfactory maximum power point operation. Further, it is shown that certain load values, falling out of the optimal range, will drive the operating point away from the true maximum power point. Detailed comparison of various topologies for MPPT is given. Selection of the converter topology for a given loading is discussed. Detailed discussion on circuit-oriented model development is given and then MPPT effectiveness of various converter systems is verified through simulations. Proposed theory and analysis is validated through experimental investigations.

  15. On maximum cycle packings in polyhedral graphs

    Directory of Open Access Journals (Sweden)

    Peter Recht

    2014-04-01

    Full Text Available This paper addresses upper and lower bounds for the cardinality of a maximum vertex-/edge-disjoint cycle packing in a polyhedral graph G. Bounds on the cardinality of such packings are provided, that depend on the size, the order or the number of faces of G, respectively. Polyhedral graphs are constructed, that attain these bounds.

  16. Hard graphs for the maximum clique problem

    NARCIS (Netherlands)

    Hoede, Cornelis

    1988-01-01

    The maximum clique problem is one of the NP-complete problems. There are graphs for which a reduction technique exists that transforms the problem for these graphs into one for graphs with specific properties in polynomial time. The resulting graphs do not grow exponentially in order and number. Gra

  17. Maximum Likelihood Estimation of Search Costs

    NARCIS (Netherlands)

    J.L. Moraga-Gonzalez (José Luis); M.R. Wildenbeest (Matthijs)

    2006-01-01

    textabstractIn a recent paper Hong and Shum (forthcoming) present a structural methodology to estimate search cost distributions. We extend their approach to the case of oligopoly and present a maximum likelihood estimate of the search cost distribution. We apply our method to a data set of online p

  18. Weak Scale From the Maximum Entropy Principle

    CERN Document Server

    Hamada, Yuta; Kawana, Kiyoharu

    2015-01-01

    The theory of multiverse and wormholes suggests that the parameters of the Standard Model are fixed in such a way that the radiation of the $S^{3}$ universe at the final stage $S_{rad}$ becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the Standard Model, we can check whether $S_{rad}$ actually becomes maximum at the observed values. In this paper, we regard $S_{rad}$ at the final stage as a function of the weak scale ( the Higgs expectation value ) $v_{h}$, and show that it becomes maximum around $v_{h}={\\cal{O}}(300\\text{GeV})$ when the dimensionless couplings in the Standard Model, that is, the Higgs self coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by \\begin{equation} v_{h}\\sim\\frac{T_{BBN}^{2}}{M_{pl}y_{e}^{5}},\

  19. Weak scale from the maximum entropy principle

    Science.gov (United States)

    Hamada, Yuta; Kawai, Hikaru; Kawana, Kiyoharu

    2015-03-01

    The theory of the multiverse and wormholes suggests that the parameters of the Standard Model (SM) are fixed in such a way that the radiation of the S3 universe at the final stage S_rad becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the SM, we can check whether S_rad actually becomes maximum at the observed values. In this paper, we regard S_rad at the final stage as a function of the weak scale (the Higgs expectation value) vh, and show that it becomes maximum around vh = {{O}} (300 GeV) when the dimensionless couplings in the SM, i.e., the Higgs self-coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by vh ˜ T_{BBN}2 / (M_{pl}ye5), where ye is the Yukawa coupling of electron, T_BBN is the temperature at which the Big Bang nucleosynthesis starts, and M_pl is the Planck mass.

  20. Global characterization of the Holocene Thermal Maximum

    NARCIS (Netherlands)

    Renssen, H.; Seppä, H.; Crosta, X.; Goosse, H.; Roche, D.M.V.A.P.

    2012-01-01

    We analyze the global variations in the timing and magnitude of the Holocene Thermal Maximum (HTM) and their dependence on various forcings in transient simulations covering the last 9000 years (9 ka), performed with a global atmosphere-ocean-vegetation model. In these experiments, we consider the i

  1. Instance Optimality of the Adaptive Maximum Strategy

    NARCIS (Netherlands)

    L. Diening; C. Kreuzer; R. Stevenson

    2016-01-01

    In this paper, we prove that the standard adaptive finite element method with a (modified) maximum marking strategy is instance optimal for the total error, being the square root of the squared energy error plus the squared oscillation. This result will be derived in the model setting of Poisson’s e

  2. Maximum phonation time: variability and reliability.

    Science.gov (United States)

    Speyer, Renée; Bogaardt, Hans C A; Passos, Valéria Lima; Roodenburg, Nel P H D; Zumach, Anne; Heijnen, Mariëlle A M; Baijens, Laura W J; Fleskens, Stijn J H M; Brunings, Jan W

    2010-05-01

    The objective of the study was to determine maximum phonation time reliability as a function of the number of trials, days, and raters in dysphonic and control subjects. Two groups of adult subjects participated in this reliability study: a group of outpatients with functional or organic dysphonia versus a group of healthy control subjects matched by age and gender. Over a period of maximally 6 weeks, three video recordings were made of five subjects' maximum phonation time trials. A panel of five experts were responsible for all measurements, including a repeated measurement of the subjects' first recordings. Patients showed significantly shorter maximum phonation times compared with healthy controls (on average, 6.6 seconds shorter). The averaged interclass correlation coefficient (ICC) over all raters per trial for the first day was 0.998. The averaged reliability coefficient per rater and per trial for repeated measurements of the first day's data was 0.997, indicating high intrarater reliability. The mean reliability coefficient per day for one trial was 0.939. When using five trials, the reliability increased to 0.987. The reliability over five trials for a single day was 0.836; for 2 days, 0.911; and for 3 days, 0.935. To conclude, the maximum phonation time has proven to be a highly reliable measure in voice assessment. A single rater is sufficient to provide highly reliable measurements.

  3. Maximum Phonation Time: Variability and Reliability

    NARCIS (Netherlands)

    R. Speyer; H.C.A. Bogaardt; V.L. Passos; N.P.H.D. Roodenburg; A. Zumach; M.A.M. Heijnen; L.W.J. Baijens; S.J.H.M. Fleskens; J.W. Brunings

    2010-01-01

    The objective of the study was to determine maximum phonation time reliability as a function of the number of trials, days, and raters in dysphonic and control subjects. Two groups of adult subjects participated in this reliability study: a group of outpatients with functional or organic dysphonia v

  4. Maximum likelihood estimation of fractionally cointegrated systems

    DEFF Research Database (Denmark)

    Lasak, Katarzyna

    In this paper we consider a fractionally cointegrated error correction model and investigate asymptotic properties of the maximum likelihood (ML) estimators of the matrix of the cointe- gration relations, the degree of fractional cointegration, the matrix of the speed of adjustment...

  5. Maximum likelihood estimation for integrated diffusion processes

    DEFF Research Database (Denmark)

    Baltazar-Larios, Fernando; Sørensen, Michael

    EM-algorithm to obtain maximum likelihood estimates of the parameters in the diffusion model. As part of the algorithm, we use a recent simple method for approximate simulation of diffusion bridges. In simulation studies for the Ornstein-Uhlenbeck process and the CIR process the proposed method works...

  6. Maximum gain of Yagi-Uda arrays

    DEFF Research Database (Denmark)

    Bojsen, J.H.; Schjær-Jacobsen, Hans; Nilsson, E.

    1971-01-01

    Numerical optimisation techniques have been used to find the maximum gain of some specific parasitic arrays. The gain of an array of infinitely thin, equispaced dipoles loaded with arbitrary reactances has been optimised. The results show that standard travelling-wave design methods are not optimum....... Yagi–Uda arrays with equal and unequal spacing have also been optimised with experimental verification....

  7. Design concept and performance considerations for fast high power semiconductor switching for high repetition rate and high power excimer laser

    Science.gov (United States)

    Goto, Tatsumi; Kakizaki, Kouji; Takagi, Shigeyuki; Satoh, Saburoh; Shinohe, Takashi; Ohashi, Hiromichi; Endo, Fumihiko; Okamura, Katsuya; Ishii, Akira; Teranishi, Tsuneharu; Yasuoka, Koichi

    1997-07-01

    A semiconductor switching power supply has been developed, in which a novel structure semiconductor device, metal-oxide-semiconductor assisted gate-triggered thyristor (MAGT) was incorporated with a single stage magnetic pulse compression circuit (MPC). The MAGT was specially designed to directly replace thyratrons in a power supply for a high repetition rate laser. Compared with conventional high power semiconductor switching devices, it was designed to enable a fast switching, retaining a high blocking voltage and to extremely reduce the transient turn-on power losses, enduring a higher peak current. A maximum peak current density of 32 kA/cm2 and a current density risetime rate di/dt of 142 kA/(cm2×μs) were obtained at the chip area with an applied anode voltage of 1.5 kV. A MAGT switching unit connecting 32 MAGTs in series was capable of switching on more than 25 kV-300 A at a repetition rate of 5 kHz, which, coupled with the MPC, was equivalent to the capability of a high power thyratron. A high repetition rate and high power XeCl excimer laser was excited by the power supply. The results confirmed the stable laser operation of a repetition rate of up to 5 kHz, the world record to our knowledge. An average output power of 0.56 kW was obtained at 5 kHz where the shortage of the total discharge current was subjoined by a conventional power supply with seven parallel switching thyratrons, simultaneously working, for the MAGT power supply could not switch a greater current than that switched by one thyratron. It was confirmed by those excitations that the MAGT unit with the MPC could replace a high power commercial thyratron directly for excimer lasers. The switching stability was significantly superior to that of the thyratron in a high repetition rate region, judging from the discharge current wave forms. It should be possible for the MAGT unit, in the future, to directly switch the discharge current within a rise time of 0.1 μs with a magnetic assist.

  8. The effect of laser repetition rate on the LASiS synthesis of biocompatible silver nanoparticles in aqueous starch solution

    Directory of Open Access Journals (Sweden)

    Zamiri R

    2013-01-01

    bandwidth of ~6 nm 'full width at half maximum' (FWHM. Stability measurements showed no significant changes in mean particle size or agglomeration or even flocculation. However, zeta potential measurements showed that optimal double layer charge is achieved at 30 Hz. Consequently, Ag–NP synthesis via the laser ablation synthesis in solution (LASiS method in starch solution seems to be a trade-off between small size and narrow size distributions and inherent and long-term stability.Keywords: laser ablation, repetition rate, silver nanoparticle, starch, amylose, amylopectin

  9. Spectroscopic Investigation of a Repetitively-Pulsed Nanosecond Discharge

    Science.gov (United States)

    Yee, Benjamin T.

    This work reports on an investigation of a repetitively-pulsed nanosecond discharge (RPND) in helium over a range of 0.3-16.0 Torr. The discharge was studied experimentally via laser-absorption spectroscopy and opticals emission spectroscopy measurements. In concert with the experimental campaign, a global model of a helium plasma was developed with the aid of particle-in-cell simulations. The global model was then used to predict the population kinetics and emissions of the RPND. Synthesis of the results provided new data and insights on the development of the RPND. Among the results were direct measurements of the triplet metastable states during the excitation period. This period was found to be unexpectedly long at low pressures (less than or equal to 1.0 Torr), suggesting an excess in high-energy electrons as compared to an equilibrium distribution. Other phenomena such as a prominent return stroke and additional energy deposition by reflections in the transmission line were also identified. Estimates of the electric field and electron temperatures were obtained for several conditions. Furthermore, several optical methods for electron temperature measurement were evaluated for application to the discharge. Based on the global model simulations, the coronal model was found to apply to the line ratio of the 33S-23Po and 31S-2 1Po transitions, however further work is needed to ascertain its applicability to experimental discharges. These results provide new insight on the development of the repetitively-pulsed nanosecond discharge. Specifically, they reveal new information about the excited state dynamics within the discharge, the non-equilibrium nature of its electrons, and several avenues for future studies. This study extends the present understanding of repetitively-pulsed discharges, and advances the knowledge of energy coupling between electric fields and plasmas.

  10. Refining borders of genome-rearrangements including repetitions

    Directory of Open Access Journals (Sweden)

    JA Arjona-Medina

    2016-10-01

    Full Text Available Abstract Background DNA rearrangement events have been widely studied in comparative genomic for many years. The importance of these events resides not only in the study about relatedness among different species, but also to determine the mechanisms behind evolution. Although there are many methods to identify genome-rearrangements (GR, the refinement of their borders has become a huge challenge. Until now no accepted method exists to achieve accurate fine-tuning: i.e. the notion of breakpoint (BP is still an open issue, and despite repeated regions are vital to understand evolution they are not taken into account in most of the GR detection and refinement methods. Methods and results We propose a method to refine the borders of GR including repeated regions. Instead of removing these repetitions to facilitate computation, we take advantage of them using a consensus alignment sequence of the repeated region in between two blocks. Using the concept of identity vectors for Synteny Blocks (SB and repetitions, a Finite State Machine is designed to detect transition points in the difference between such vectors. The method does not force the BP to be a region or a point but depends on the alignment transitions within the SBs and repetitions. Conclusion The accurate definition of the borders of SB and repeated genomic regions and consequently the detection of BP might help to understand the evolutionary model of species. In this manuscript we present a new proposal for such a refinement. Features of the SBs borders and BPs are different and fit with what is expected. SBs with more diversity in annotations and BPs short and richer in DNA replication and stress response, which are strongly linked with rearrangements.

  11. Effective constitutive relations for large repetitive frame-like structures

    Science.gov (United States)

    Nayfeh, A. H.; Hefzy, M. S.

    1981-01-01

    Effective mechanical properties for large repetitive framelike structures are derived using combinations of strength of material and orthogonal transformation techniques. Symmetry considerations are used in order to identify independent property constants. The actual values of these constants are constructed according to a building block format which is carried out in the three consecutive steps: (1) all basic planar lattices are identified; (2) effective continuum properties are derived for each of these planar basic grids using matrix structural analysis methods; and (3) orthogonal transformations are used to determine the contribution of each basic set to the overall effective continuum properties of the structure.

  12. Phylogenetic analysis of the genus Hordeum using repetitive DNA sequences

    DEFF Research Database (Denmark)

    Svitashev, S.; Bryngelsson, T.; Vershinin, A.

    1994-01-01

    A set of six cloned barley (Hordeum vulgare) repetitive DNA sequences was used for the analysis of phylogenetic relationships among 31 species (46 taxa) of the genus Hordeum, using molecular hybridization techniques. In situ hybridization experiments showed dispersed organization of the sequences...... over all chromosomes of H. vulgare and the wild barley species H. bulbosum, H. marinum and H. murinum. Southern blot hybridization revealed different levels of polymorphism among barley species and the RFLP data were used to generate a phylogenetic tree for the genus Hordeum. Our data are in a good...

  13. REDUCTION APPROACHES FOR VIBRATION CONTROL OF REPETITIVE STRUCTURES

    Institute of Scientific and Technical Information of China (English)

    CHEN Wei-min; SUN Dong-chang; WANG Da-jun; WEI Jian-ping; TONG Li-yong; WANG Quan

    2006-01-01

    The reduction approaches are presented for vibration control of symmetric,cyclic periodic and linking structures. The condensation of generalized coordinates, the locations of sensors and actuators, and the relation between system inputs and control forces are assumed to be set in a symmetric way so that the control system posses the same repetition as the structure considered. By employing proper transformations of condensed generalized coordinates and the system inputs, the vibration control of an entire system can be implemented by carrying out the control of a number of sub-structures, and thus the dimension of the control problem can be significantly reduced.

  14. A Linguistic Analysis of a Textual Repetition in Homer's Iliad

    Directory of Open Access Journals (Sweden)

    Alberto MANCO

    2011-01-01

    Full Text Available In Homer's Iliad can be detected some contiguous repetitions in the text (in the same verse or away from each other in an irrelevant way. They appear different from one another but they are related from semantic and morphological issues. An example is provided by the use of the form Hectōr in conjunction with schesō, the alternative form of ecsō. We argue that this cohesion is not a coincidence and we try to suggest an explanation.

  15. Atypical presentation of NREM arousal parasomnia with repetitive episodes.

    Science.gov (United States)

    Trajanovic, N N; Shapiro, C M; Ong, A

    2007-08-01

    The case report describes a distinct variant of non-REM (Rapid Eye Movement) arousal parasomnia, sleepwalking type, featuring repetitive abrupt arousals, mostly from slow-wave sleep, and various automatisms and semi-purposeful behaviours. The frequency of events and distribution throughout the night presented as a continuous status of parasomnia ('status parasomnicus'). The patient responded well to treatment typically administered for adult NREM parasomnias, and after careful review of the clinical presentation, objective findings and treatment outcome, sleep-related epilepsy was ruled out in favour of parasomnia.

  16. Background music for repetitive task performance of severely retarded individuals.

    Science.gov (United States)

    Richman, J S

    1976-11-01

    Environmental manipulation in the form of specific tempo background music was used to assist in the habilitation of severely retarded persons. Thirty institutionalized retarded males were tested on a repetitive manual performance task judged to be similar to the type of tasks found in sheltered workshops. Each subject received each of the background treatments noncontingently: no music, slow tempo music, regular tempo music, fast tempo music. The results indicated that the regular tempo of background music facilitated the greatest improvement in performance, suggesting that the effect of music on performance is more complex than the issue of contingent presentation.

  17. Repetitively Pulsed Electric Laser Acoustic Studies. Volume 1.

    Science.gov (United States)

    1983-09-01

    INGARD ET AL. SEP 83 UNCLASSIFIED APHAL-IR-83-2858-VOL-1 F336i5 86-C 2848 F/ 0/ 8, EEEmohEEEomhiE EohEEmhohEEEEE mhhhmmomhhlm...TR-83-2058, Vol 9, 0 REPETITIVELY PULSED ELECTRIC LASER ACOUSTIC STUDIES Volume I K. U. INGARD , CHARLES F. MCMILLAN uDEPARTMENT OF AERONAUTICS AND...CONTRACT OR GRANT NUMBER(s) K.U. Ingard and Charles F. McMillan F33615.80-C-2040 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT

  18. High voltage high repetition rate pulse using Marx topology

    Science.gov (United States)

    Hakki, A.; Kashapov, N.

    2015-06-01

    The paper describes Marx topology using MOSFET transistors. Marx circuit with 10 stages has been done, to obtain pulses about 5.5KV amplitude, and the width of the pulses was about 30μsec with a high repetition rate (PPS > 100), Vdc = 535VDC is the input voltage for supplying the Marx circuit. Two Ferrite ring core transformers were used to control the MOSFET transistors of the Marx circuit (the first transformer to control the charging MOSFET transistors, the second transformer to control the discharging MOSFET transistors).

  19. About the Infinite Repetition of Histories in Space

    Directory of Open Access Journals (Sweden)

    Manuel Alfonseca

    2014-08-01

    Full Text Available This paper analyzes two different proposals, one by Ellis and Brundrit, based on classical relativistic cosmology, the other by Garriga and Vilenkin, based on the DH interpretation of quantum mechanics, both concluding that, in an infinite universe, planets and beings must be repeated an infinite number of times. We point to possible shortcomings in these arguments. We conclude that the idea of an infinite repetition of histories in space cannot be considered strictly speaking a consequence of current physics and cosmology. Such ideas should be seen rather as examples of «ironic science» in the terminology of John Horgan.

  20. Effect of very low-intensity resistance training with slow movement on muscle size and strength in healthy older adults.

    Science.gov (United States)

    Watanabe, Yuya; Madarame, Haruhiko; Ogasawara, Riki; Nakazato, Koichi; Ishii, Naokata

    2014-11-01

    We previously reported that low-intensity [50% of one repetition maximum (1RM)] resistance training with slow movement and tonic force generation (LST) causes muscle hypertrophy and strength gain in older participants. The aim of this study was to determine whether resistance training with slow movement and much more reduced intensity (30%1RM) increases muscle size and strength in older adults. Eighteen participants (60-77 years) were randomly assigned to two groups. One group performed very low-intensity (30% 1RM) knee extension exercise with continuous muscle contraction (LST: 3-s eccentric, 3-s concentric, and 1-s isometric actions with no rest between each repetition) twice a week for 12 weeks. The other group underwent intermitted muscle contraction (CON: 1-s concentric and 1-s eccentric actions with 1-s rest between each repetition) for the same time period. The 1RM, isometric and isokinetic strengths, and cross-sectional image of the mid-thigh obtained by magnetic resonance imaging were examined before and after the intervention. LST significantly increased the cross-sectional area of the quadriceps muscle (5.0%, Phypertrophy and strength gain. LST would be useful for preventing sarcopenia in older individuals.

  1. Acute ingestion of sugar-free red bull energy drink has no effect on upper body strength and muscular endurance in resistance trained men.

    Science.gov (United States)

    Eckerson, Joan M; Bull, Anthony J; Baechle, Thomas R; Fischer, Chelsea A; O'Brien, Daniel C; Moore, Geri A; Yee, Jennifer C; Pulverenti, Timothy S

    2013-08-01

    Consumption of energy drinks by both recreational and competitive athletes has increased dramatically in recent years. The primary ingredients in many energy drinks include caffeine (CAF) in various forms and taurine. The purpose of this randomized, double-blind, crossover study was to examine the effect of sugar-free (SF) Red Bull (RB) containing CAF and taurine to a CAF only drink and a SF CAF-free placebo (PL) on 1 repetition maximum (1RM) bench press (BP) and the volume load (VL; repetitions × kg at 70% 1RM) during one BP set to failure in experienced lifters. Seventeen college-age men randomly received the following: (A) 500 mL of SF-RB containing CAF (160 mg) and taurine (2000 mg); (B) 500 mL of a SF drink containing CAF only (160 mg); or (C) a SF CAF-free 500 mL PL drink 60 minutes before testing on 3 separate occasions. After a standard warm-up, the 1RM was determined for each subject and, after 5 minutes rest, they completed repetitions to failure at 70% of their 1RM to assess VL. Differences between trials for 1RM BP and the VL were identified using repeated measures analysis of variance (p drink had any effect on 1RM BP (115.13 ± 16.19 kg and 114.87 ± 16.16 kg, respectively) or VL (1173.08 ± 170.66 kg and 1164.14 ± 147.03 kg, respectively) compared with PL (1RM = 114.07 ± 16.09 kg; VL = 1141.46 ± 193.41 kg). Although the CAF content in the energy drinks used in the present study was low (∼2.0 mg/kg), the finding of no effect of the CAF containing energy drinks for 1RM BP are in agreement with previous studies using intakes up to 6.0 mg/kg. These findings suggest that SF-RB has no effect on upper body 1RM strength or VL in resistance trained men.

  2. Model Selection Through Sparse Maximum Likelihood Estimation

    CERN Document Server

    Banerjee, Onureena; D'Aspremont, Alexandre

    2007-01-01

    We consider the problem of estimating the parameters of a Gaussian or binary distribution in such a way that the resulting undirected graphical model is sparse. Our approach is to solve a maximum likelihood problem with an added l_1-norm penalty term. The problem as formulated is convex but the memory requirements and complexity of existing interior point methods are prohibitive for problems with more than tens of nodes. We present two new algorithms for solving problems with at least a thousand nodes in the Gaussian case. Our first algorithm uses block coordinate descent, and can be interpreted as recursive l_1-norm penalized regression. Our second algorithm, based on Nesterov's first order method, yields a complexity estimate with a better dependence on problem size than existing interior point methods. Using a log determinant relaxation of the log partition function (Wainwright & Jordan (2006)), we show that these same algorithms can be used to solve an approximate sparse maximum likelihood problem for...

  3. Maximum-entropy description of animal movement.

    Science.gov (United States)

    Fleming, Chris H; Subaşı, Yiğit; Calabrese, Justin M

    2015-03-01

    We introduce a class of maximum-entropy states that naturally includes within it all of the major continuous-time stochastic processes that have been applied to animal movement, including Brownian motion, Ornstein-Uhlenbeck motion, integrated Ornstein-Uhlenbeck motion, a recently discovered hybrid of the previous models, and a new model that describes central-place foraging. We are also able to predict a further hierarchy of new models that will emerge as data quality improves to better resolve the underlying continuity of animal movement. Finally, we also show that Langevin equations must obey a fluctuation-dissipation theorem to generate processes that fall from this class of maximum-entropy distributions when the constraints are purely kinematic.

  4. Pareto versus lognormal: a maximum entropy test.

    Science.gov (United States)

    Bee, Marco; Riccaboni, Massimo; Schiavo, Stefano

    2011-08-01

    It is commonly found that distributions that seem to be lognormal over a broad range change to a power-law (Pareto) distribution for the last few percentiles. The distributions of many physical, natural, and social events (earthquake size, species abundance, income and wealth, as well as file, city, and firm sizes) display this structure. We present a test for the occurrence of power-law tails in statistical distributions based on maximum entropy. This methodology allows one to identify the true data-generating processes even in the case when it is neither lognormal nor Pareto. The maximum entropy approach is then compared with other widely used methods and applied to different levels of aggregation of complex systems. Our results provide support for the theory that distributions with lognormal body and Pareto tail can be generated as mixtures of lognormally distributed units.

  5. Maximum Variance Hashing via Column Generation

    Directory of Open Access Journals (Sweden)

    Lei Luo

    2013-01-01

    item search. Recently, a number of data-dependent methods have been developed, reflecting the great potential of learning for hashing. Inspired by the classic nonlinear dimensionality reduction algorithm—maximum variance unfolding, we propose a novel unsupervised hashing method, named maximum variance hashing, in this work. The idea is to maximize the total variance of the hash codes while preserving the local structure of the training data. To solve the derived optimization problem, we propose a column generation algorithm, which directly learns the binary-valued hash functions. We then extend it using anchor graphs to reduce the computational cost. Experiments on large-scale image datasets demonstrate that the proposed method outperforms state-of-the-art hashing methods in many cases.

  6. The Maximum Resource Bin Packing Problem

    DEFF Research Database (Denmark)

    Boyar, J.; Epstein, L.; Favrholdt, L.M.

    2006-01-01

    algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find......Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... the competitive ratio of various natural algorithms. We study the general versions of the problems as well as the parameterized versions where there is an upper bound of on the item sizes, for some integer k....

  7. Nonparametric Maximum Entropy Estimation on Information Diagrams

    CERN Document Server

    Martin, Elliot A; Meinke, Alexander; Děchtěrenko, Filip; Davidsen, Jörn

    2016-01-01

    Maximum entropy estimation is of broad interest for inferring properties of systems across many different disciplines. In this work, we significantly extend a technique we previously introduced for estimating the maximum entropy of a set of random discrete variables when conditioning on bivariate mutual informations and univariate entropies. Specifically, we show how to apply the concept to continuous random variables and vastly expand the types of information-theoretic quantities one can condition on. This allows us to establish a number of significant advantages of our approach over existing ones. Not only does our method perform favorably in the undersampled regime, where existing methods fail, but it also can be dramatically less computationally expensive as the cardinality of the variables increases. In addition, we propose a nonparametric formulation of connected informations and give an illustrative example showing how this agrees with the existing parametric formulation in cases of interest. We furthe...

  8. Zipf's law, power laws and maximum entropy

    Science.gov (United States)

    Visser, Matt

    2013-04-01

    Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines—from astronomy to demographics to software structure to economics to linguistics to zoology, and even warfare. A recent model of random group formation (RGF) attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present paper I argue that the specific cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.

  9. Zipf's law, power laws, and maximum entropy

    CERN Document Server

    Visser, Matt

    2012-01-01

    Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines - from astronomy to demographics to economics to linguistics to zoology, and even warfare. A recent model of random group formation [RGF] attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present article I argue that the cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.

  10. Regions of constrained maximum likelihood parameter identifiability

    Science.gov (United States)

    Lee, C.-H.; Herget, C. J.

    1975-01-01

    This paper considers the parameter identification problem of general discrete-time, nonlinear, multiple-input/multiple-output dynamic systems with Gaussian-white distributed measurement errors. Knowledge of the system parameterization is assumed to be known. Regions of constrained maximum likelihood (CML) parameter identifiability are established. A computation procedure employing interval arithmetic is proposed for finding explicit regions of parameter identifiability for the case of linear systems. It is shown that if the vector of true parameters is locally CML identifiable, then with probability one, the vector of true parameters is a unique maximal point of the maximum likelihood function in the region of parameter identifiability and the CML estimation sequence will converge to the true parameters.

  11. A Maximum Radius for Habitable Planets.

    Science.gov (United States)

    Alibert, Yann

    2015-09-01

    We compute the maximum radius a planet can have in order to fulfill two constraints that are likely necessary conditions for habitability: 1- surface temperature and pressure compatible with the existence of liquid water, and 2- no ice layer at the bottom of a putative global ocean, that would prevent the operation of the geologic carbon cycle to operate. We demonstrate that, above a given radius, these two constraints cannot be met: in the Super-Earth mass range (1-12 Mearth), the overall maximum that a planet can have varies between 1.8 and 2.3 Rearth. This radius is reduced when considering planets with higher Fe/Si ratios, and taking into account irradiation effects on the structure of the gas envelope.

  12. Bottle microresonator broadband and low repetition rate frequency comb generator

    CERN Document Server

    Dvoyrin, V

    2016-01-01

    We propose a new type of broadband and low repetition rate frequency comb generator which has the shape of an elongated and nanoscale-shallow optical bottle microresonator created at the surface of an optical fiber. The free spectral range (FSR) of the broadband azimuthal eigenfrequency series of this resonator is the exact multiple of the FSR of the dense and narrowband axial series. The effective radius variation of the microresonator is close to a parabola with a nanoscale height which is greater or equal to lambda/2pi*n0 (here lambda is the characteristic radiation wavelength and n0 is the refractive index of the microresonator material). Overall, the microresonator possesses a broadband, small FSR, and accurately equidistant spectrum convenient for the generation of a broadband and low repetition rate optical frequency comb. It is shown that this comb can be generated by pumping with a cw laser, which radiation frequency matches a single axial eigenfrequency of the microresonator, or, alternatively, by p...

  13. Verbal behavior in Alzheimer disease patients: Analysis of phrase repetition

    Directory of Open Access Journals (Sweden)

    Juliana Francisca Cecato

    Full Text Available Abstract Language problems in the elderly with AD are due to the fact that deterioration occurs not only in semantic memory, but in a group of cognitive factors, evidenced by a deficiency in search strategies for linguistic information. Objectives: To evaluate phrase repetition in two cognitive tests, the MMSE and MoCA, in a group of Alzheimer disease patients (AD and normal controls. Methods: A Cross-sectional study was conducted involving 20 patients who sought medical assistance at a geriatric institute in Jundiaí, São Paulo. The subjects underwent a detailed clinical examination and neuropsychometric evaluation. All subjects with AD met DSM-IV and NINCDS-ADRDA criteria. Ten patients received a diagnosis of AD and 10 were healthy subjects, forming the control group (CG. Results: All participants correctly answered the phrase from the MMSE (phrase 1. The MoCA phrases (phrases 2 and 3 were correct in 80% and 90%, respectively in the CG and in 40% and 50%, respectively in the AD group. Conclusions: The MoCA test proved more effective in evaluating the echoic behavior in AD patients compared to the MMSE. The simpler phrase repetition task in the MMSE was found to be less sensitive in detecting mild language decline in AD patients.

  14. Effect of Airflows on Repetitive Nanosecond Volume Discharges

    Science.gov (United States)

    Tang, Jingfeng; Wei, Liqiu; Huo, Yuxin; Song, Jian; Yu, Daren; Zhang, Chaohai

    2016-03-01

    Atmospheric pressure discharges excited by repetitive nanosecond pulses have attracted significant attention for various applications. In this paper, a plate-plate discharge with airflows is excited by a repetitive nanosecond pulse generator. Under different experiment conditions, the applied voltages, discharge currents, and discharge images are recorded. The plasma images presented here indicate that the volume discharge modes vary with airflow speeds, and a diffuse and homogeneous volume discharge occurs at the speed of more than 35 m/s. The role of airflows provides different effects on the 2-stage pulse discharges. The 1st pulse currents nearly maintain consistency for different airflow speeds. However, the 2nd pulse current has a change trend of first decreasing and then rapidly increasing, and the value difference for 2nd pulse currents is about 20 A under different airflows. In addition, the experimental results are discussed according to the electrical parameters and discharge images. supported by National Natural Science Foundation of China (Nos. 51006027, 51437002, and 51477035)

  15. Hemodynamic Profiles of Functional and Dysfunctional Forms of Repetitive Thinking.

    Science.gov (United States)

    Ottaviani, Cristina; Brosschot, Jos F; Lonigro, Antonia; Medea, Barbara; Van Diest, Ilse; Thayer, Julian F

    2017-04-01

    The ability of the human brain to escape the here and now (mind wandering) can take functional (problem solving) and dysfunctional (perseverative cognition) routes. Although it has been proposed that only the latter may act as a mediator of the relationship between stress and cardiovascular disease, both functional and dysfunctional forms of repetitive thinking have been associated with blood pressure (BP) reactivity of the same magnitude. However, a similar BP reactivity may be caused by different physiological determinants, which may differ in their risk for cardiovascular pathology. To examine the way (hemodynamic profile) and the extent (compensation deficit) to which total peripheral resistance and cardiac output compensate for each other in determining BP reactivity during functional and dysfunctional types of repetitive thinking. Fifty-six healthy participants randomly underwent a perseverative cognition, a mind wandering, and a problem solving induction, each followed by a 5-min recovery period while their cardiovascular parameters were continuously monitored. Perseverative cognition and problem solving (but not mind wandering) elicited BP increases of similar magnitude. However, perseverative cognition was characterized by a more vascular (versus myocardial) profile compared to mind wandering and problem solving. As a consequence, BP recovery was impaired after perseverative cognition compared to the other two conditions. Given that high vascular resistance and delayed recovery are the hallmarks of hypertension the results suggest a potential mechanism through which perseverative cognition may act as a mediator in the relationship between stress and risk for developing precursors to cardiovascular disease.

  16. Urine concentrations of repetitive doses of inhaled salbutamol

    DEFF Research Database (Denmark)

    Elers, J; Pedersen, Lars; Henninge, J

    2011-01-01

    We examined blood and urine concentrations of repetitive doses of inhaled salbutamol in relation to the existing cut-off value used in routine doping control. We compared the concentrations in asthmatics with regular use of beta2-agonists prior to study and healthy controls with no previous use...... of beta2-agonists. We enrolled 10 asthmatics and 10 controls in an open-label study in which subjects inhaled repetitive doses of 400 microgram salbutamol every second hour (total 1600 microgram), which is the permitted daily dose by the World Anti-Doping Agency (WADA). Blood samples were collected...... and the median ranged from 268 to 611 ng×mL (-1). No samples exceeded the WADA threshold value of 1000 ng×mL (-1) when corrected for the urine specific gravity. When not corrected one sample exceeded the cut-off value with urine concentration of 1082 ng×mL (-1). In conclusion we found no differences in blood...

  17. Multiple repetition time balanced steady-state free precession imaging.

    Science.gov (United States)

    Cukur, Tolga; Nishimura, Dwight G

    2009-07-01

    Although balanced steady-state free precession (bSSFP) imaging yields high signal-to-noise ratio (SNR) efficiency, the bright lipid signal is often undesirable. The bSSFP spectrum can be shaped to suppress the fat signal with scan-efficient alternating repetition time (ATR) bSSFP. However, the level of suppression is limited, and the pass-band is narrow due to its nonuniform shape. A multiple repetition time (TR) bSSFP scheme is proposed that creates a broad stop-band with a scan efficiency comparable with ATR-SSFP. Furthermore, the pass-band signal uniformity is improved, resulting in fewer shading/banding artifacts. When data acquisition occurs in more than a single TR within the multiple-TR period, the echoes can be combined to significantly improve the level of suppression. The signal characteristics of the proposed technique were compared with bSSFP and ATR-SSFP. The multiple-TR method generates identical contrast to bSSFP, and achieves up to an order of magnitude higher stop-band suppression than ATR-SSFP. In vivo studies at 1.5 T and 3 T demonstrate the superior fat-suppression performance of multiple-TR bSSFP.

  18. Final Report, Photocathodes for High Repetition Rate Light Sources

    Energy Technology Data Exchange (ETDEWEB)

    Ben-Zvi, Ilan [Stony Brook University

    2014-04-20

    This proposal brought together teams at Brookhaven National Laboratory (BNL), Lawrence Berkeley National Laboratory (LBNL) and Stony Brook University (SBU) to study photocathodes for high repetition rate light sources such as Free Electron Lasers (FEL) and Energy Recovery Linacs (ERL). The work done under this grant comprises a comprehensive program on critical aspects of the production of the electron beams needed for future user facilities. Our program pioneered in situ and in operando diagnostics for alkali antimonide growth. The focus is on development of photocathodes for high repetition rate Free Electron Lasers (FELs) and Energy Recovery Linacs (ERLs), including testing SRF photoguns, both normal-conducting and superconducting. Teams from BNL, LBNL and Stony Brook University (SBU) led this research, and coordinated their work over a range of topics. The work leveraged a robust infrastructure of existing facilities and the support was used for carrying out the research at these facilities. The program concentrated in three areas: a) Physics and chemistry of alkali-antimonide cathodes b) Development and testing of a diamond amplifier for photocathodes c) Tests of both cathodes in superconducting RF photoguns and copper RF photoguns

  19. Resistance to change of operant variation and repetition.

    Science.gov (United States)

    Doughty, A H; Lattal, K A

    2001-09-01

    A multiple chained schedule was used to compare the relative resistance to change of variable and fixed four-peck response sequences in pigeons. In one terminal link, a response sequence produced food only if it occurred infrequently relative to 15 other response sequences (vary). In the other terminal link, a single response sequence produced food (repeat). Identical variable-interval schedules operated in the initial links. During baseline, lower response rates generally occurred in the vary initial link, and similar response and reinforcement rates occurred in each terminal link. Resistance of responding to prefeeding and three rates of response-independent food delivered during the intercomponent intervals then was compared between components. During each disruption condition, initial- and terminal-link response rates generally were more resistant in the vary component than in the repeat component. During the response-independent food conditions, terminal-link response rates were more resistant than initial-link response rates in each component, but this did not occur during prefeeding. Variation (in vary) and repetition (in repeat) both decreased during the response-independent food conditions in the respective components, but with relatively greater disruption in repeat. These results extend earlier findings demonstrating that operant variation is more resistant to disruption than is operant repetition and suggest that theories of response strength, such as behavioral momentum theory, must consider factors other than reinforcement rate. The implications of the results for understanding operant response classes are discussed.

  20. Maximum Profit Configurations of Commercial Engines

    OpenAIRE

    Yiran Chen

    2011-01-01

    An investigation of commercial engines with finite capacity low- and high-price economic subsystems and a generalized commodity transfer law [n ∝ Δ (P m)] in commodity flow processes, in which effects of the price elasticities of supply and demand are introduced, is presented in this paper. Optimal cycle configurations of commercial engines for maximum profit are obtained by applying optimal control theory. In some special cases, the eventual state—market equilibrium—is solely determined by t...

  1. A stochastic maximum principle via Malliavin calculus

    OpenAIRE

    Øksendal, Bernt; Zhou, Xun Yu; Meyer-Brandis, Thilo

    2008-01-01

    This paper considers a controlled It\\^o-L\\'evy process where the information available to the controller is possibly less than the overall information. All the system coefficients and the objective performance functional are allowed to be random, possibly non-Markovian. Malliavin calculus is employed to derive a maximum principle for the optimal control of such a system where the adjoint process is explicitly expressed.

  2. Tissue radiation response with maximum Tsallis entropy.

    Science.gov (United States)

    Sotolongo-Grau, O; Rodríguez-Pérez, D; Antoranz, J C; Sotolongo-Costa, Oscar

    2010-10-08

    The expression of survival factors for radiation damaged cells is currently based on probabilistic assumptions and experimentally fitted for each tumor, radiation, and conditions. Here, we show how the simplest of these radiobiological models can be derived from the maximum entropy principle of the classical Boltzmann-Gibbs expression. We extend this derivation using the Tsallis entropy and a cutoff hypothesis, motivated by clinical observations. The obtained expression shows a remarkable agreement with the experimental data found in the literature.

  3. Maximum Estrada Index of Bicyclic Graphs

    CERN Document Server

    Wang, Long; Wang, Yi

    2012-01-01

    Let $G$ be a simple graph of order $n$, let $\\lambda_1(G),\\lambda_2(G),...,\\lambda_n(G)$ be the eigenvalues of the adjacency matrix of $G$. The Esrada index of $G$ is defined as $EE(G)=\\sum_{i=1}^{n}e^{\\lambda_i(G)}$. In this paper we determine the unique graph with maximum Estrada index among bicyclic graphs with fixed order.

  4. Maximum privacy without coherence, zero-error

    Science.gov (United States)

    Leung, Debbie; Yu, Nengkun

    2016-09-01

    We study the possible difference between the quantum and the private capacities of a quantum channel in the zero-error setting. For a family of channels introduced by Leung et al. [Phys. Rev. Lett. 113, 030512 (2014)], we demonstrate an extreme difference: the zero-error quantum capacity is zero, whereas the zero-error private capacity is maximum given the quantum output dimension.

  5. Automatic maximum entropy spectral reconstruction in NMR.

    Science.gov (United States)

    Mobli, Mehdi; Maciejewski, Mark W; Gryk, Michael R; Hoch, Jeffrey C

    2007-10-01

    Developments in superconducting magnets, cryogenic probes, isotope labeling strategies, and sophisticated pulse sequences together have enabled the application, in principle, of high-resolution NMR spectroscopy to biomolecular systems approaching 1 megadalton. In practice, however, conventional approaches to NMR that utilize the fast Fourier transform, which require data collected at uniform time intervals, result in prohibitively lengthy data collection times in order to achieve the full resolution afforded by high field magnets. A variety of approaches that involve nonuniform sampling have been proposed, each utilizing a non-Fourier method of spectrum analysis. A very general non-Fourier method that is capable of utilizing data collected using any of the proposed nonuniform sampling strategies is maximum entropy reconstruction. A limiting factor in the adoption of maximum entropy reconstruction in NMR has been the need to specify non-intuitive parameters. Here we describe a fully automated system for maximum entropy reconstruction that requires no user-specified parameters. A web-accessible script generator provides the user interface to the system.

  6. Maximum entropy analysis of cosmic ray composition

    CERN Document Server

    Nosek, Dalibor; Vícha, Jakub; Trávníček, Petr; Nosková, Jana

    2016-01-01

    We focus on the primary composition of cosmic rays with the highest energies that cause extensive air showers in the Earth's atmosphere. A way of examining the two lowest order moments of the sample distribution of the depth of shower maximum is presented. The aim is to show that useful information about the composition of the primary beam can be inferred with limited knowledge we have about processes underlying these observations. In order to describe how the moments of the depth of shower maximum depend on the type of primary particles and their energies, we utilize a superposition model. Using the principle of maximum entropy, we are able to determine what trends in the primary composition are consistent with the input data, while relying on a limited amount of information from shower physics. Some capabilities and limitations of the proposed method are discussed. In order to achieve a realistic description of the primary mass composition, we pay special attention to the choice of the parameters of the sup...

  7. A Maximum Resonant Set of Polyomino Graphs

    Directory of Open Access Journals (Sweden)

    Zhang Heping

    2016-05-01

    Full Text Available A polyomino graph P is a connected finite subgraph of the infinite plane grid such that each finite face is surrounded by a regular square of side length one and each edge belongs to at least one square. A dimer covering of P corresponds to a perfect matching. Different dimer coverings can interact via an alternating cycle (or square with respect to them. A set of disjoint squares of P is a resonant set if P has a perfect matching M so that each one of those squares is M-alternating. In this paper, we show that if K is a maximum resonant set of P, then P − K has a unique perfect matching. We further prove that the maximum forcing number of a polyomino graph is equal to the cardinality of a maximum resonant set. This confirms a conjecture of Xu et al. [26]. We also show that if K is a maximal alternating set of P, then P − K has a unique perfect matching.

  8. The maximum rate of mammal evolution

    Science.gov (United States)

    Evans, Alistair R.; Jones, David; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Fitzgerald, Erich M. G.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Saarinen, Juha J.; Sibly, Richard M.; Smith, Felisa A.; Stephens, Patrick R.; Theodor, Jessica M.; Uhen, Mark D.

    2012-03-01

    How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous-Paleogene (K-Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes.

  9. Minimal Length, Friedmann Equations and Maximum Density

    CERN Document Server

    Awad, Adel

    2014-01-01

    Inspired by Jacobson's thermodynamic approach[gr-qc/9504004], Cai et al [hep-th/0501055,hep-th/0609128] have shown the emergence of Friedmann equations from the first law of thermodynamics. We extend Akbar--Cai derivation [hep-th/0609128] of Friedmann equations to accommodate a general entropy-area law. Studying the resulted Friedmann equations using a specific entropy-area law, which is motivated by the generalized uncertainty principle (GUP), reveals the existence of a maximum energy density closed to Planck density. Allowing for a general continuous pressure $p(\\rho,a)$ leads to bounded curvature invariants and a general nonsingular evolution. In this case, the maximum energy density is reached in a finite time and there is no cosmological evolution beyond this point which leaves the big bang singularity inaccessible from a spacetime prospective. The existence of maximum energy density and a general nonsingular evolution is independent of the equation of state and the spacial curvature $k$. As an example w...

  10. Maximum saliency bias in binocular fusion

    Science.gov (United States)

    Lu, Yuhao; Stafford, Tom; Fox, Charles

    2016-07-01

    Subjective experience at any instant consists of a single ("unitary"), coherent interpretation of sense data rather than a "Bayesian blur" of alternatives. However, computation of Bayes-optimal actions has no role for unitary perception, instead being required to integrate over every possible action-percept pair to maximise expected utility. So what is the role of unitary coherent percepts, and how are they computed? Recent work provided objective evidence for non-Bayes-optimal, unitary coherent, perception and action in humans; and further suggested that the percept selected is not the maximum a posteriori percept but is instead affected by utility. The present study uses a binocular fusion task first to reproduce the same effect in a new domain, and second, to test multiple hypotheses about exactly how utility may affect the percept. After accounting for high experimental noise, it finds that both Bayes optimality (maximise expected utility) and the previously proposed maximum-utility hypothesis are outperformed in fitting the data by a modified maximum-salience hypothesis, using unsigned utility magnitudes in place of signed utilities in the bias function.

  11. The maximum rate of mammal evolution

    Science.gov (United States)

    Evans, Alistair R.; Jones, David; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Fitzgerald, Erich M. G.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Saarinen, Juha J.; Sibly, Richard M.; Smith, Felisa A.; Stephens, Patrick R.; Theodor, Jessica M.; Uhen, Mark D.

    2012-01-01

    How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous–Paleogene (K–Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes. PMID:22308461

  12. Maximum-biomass prediction of homofermentative Lactobacillus.

    Science.gov (United States)

    Cui, Shumao; Zhao, Jianxin; Liu, Xiaoming; Chen, Yong Q; Zhang, Hao; Chen, Wei

    2016-07-01

    Fed-batch and pH-controlled cultures have been widely used for industrial production of probiotics. The aim of this study was to systematically investigate the relationship between the maximum biomass of different homofermentative Lactobacillus and lactate accumulation, and to develop a prediction equation for the maximum biomass concentration in such cultures. The accumulation of the end products and the depletion of nutrients by various strains were evaluated. In addition, the minimum inhibitory concentrations (MICs) of acid anions for various strains at pH 7.0 were examined. The lactate concentration at the point of complete inhibition was not significantly different from the MIC of lactate for all of the strains, although the inhibition mechanism of lactate and acetate on Lactobacillus rhamnosus was different from the other strains which were inhibited by the osmotic pressure caused by acid anions at pH 7.0. When the lactate concentration accumulated to the MIC, the strains stopped growing. The maximum biomass was closely related to the biomass yield per unit of lactate produced (YX/P) and the MIC (C) of lactate for different homofermentative Lactobacillus. Based on the experimental data obtained using different homofermentative Lactobacillus, a prediction equation was established as follows: Xmax - X0 = (0.59 ± 0.02)·YX/P·C.

  13. The maximum rate of mammal evolution.

    Science.gov (United States)

    Evans, Alistair R; Jones, David; Boyer, Alison G; Brown, James H; Costa, Daniel P; Ernest, S K Morgan; Fitzgerald, Erich M G; Fortelius, Mikael; Gittleman, John L; Hamilton, Marcus J; Harding, Larisa E; Lintulaakso, Kari; Lyons, S Kathleen; Okie, Jordan G; Saarinen, Juha J; Sibly, Richard M; Smith, Felisa A; Stephens, Patrick R; Theodor, Jessica M; Uhen, Mark D

    2012-03-13

    How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous-Paleogene (K-Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes.

  14. Cardiac autonomic responses during upper versus lower limb resistance exercise in healthy elderly men

    Directory of Open Access Journals (Sweden)

    Heloisa G. Machado-Vidotti

    2014-01-01

    Full Text Available Objective: To investigate the cardiac autonomic responses during upper versus lower limb discontinuous resistance exercise (RE at different loads in healthy older men. Method: Ten volunteers (65±1.2 years underwent the one-repetition maximum (1RM test to determine the maximum load for the bench press and the leg press. Discontinuous RE was initiated at a load of 10%1RM with subsequent increases of 10% until 30%1RM, followed by increases of 5%1RM until exhaustion. Heart rate (HR and R-R interval were recorded at rest and for 4 minutes at each load applied. Heart rate variability (HRV was analyzed in 5-min segments at rest and at each load in the most stable 2-min signal. Results: Parasympathetic indices decreased significantly in both exercises from 30%1RM compared to rest (rMSSD: 20±2 to 11±3 and 29±5 to 12±2 ms; SD1: 15±2 to 8±1 and 23±4 to 7±1 ms, for upper and lower limb exercise respectively and HR increased (69±4 to 90±4 bpm for upper and 66±2 to 89±1 bpm for lower. RMSM increased for upper limb exercise, but decreased for lower limb exercise (28±3 to 45±9 and 34±5 to 14±3 ms, respectively. In the frequency domain, the sympathetic (LF and sympathovagal balance (LF/HF indices were higher and the parasympathetic index (HF was lower for upper limb exercise than for lower limb exercise from 35% of 1RM. Conclusions: Cardiac autonomic change occurred from 30% of 1RM regardless of RE limb. However, there was more pronounced sympathetic increase and vagal decrease for upper limb exercise than for lower limb exercise. These results provide a basis for more effective prescription of RE to promote health in this population.

  15. Neuronal mechanisms and circuits underlying repetitive behaviors in mouse models of autism spectrum disorder.

    Science.gov (United States)

    Kim, Hyopil; Lim, Chae-Seok; Kaang, Bong-Kiun

    2016-01-20

    Autism spectrum disorder (ASD) refers to a broad spectrum of neurodevelopmental disorders characterized by three central behavioral symptoms: impaired social interaction, impaired social communication, and restricted and repetitive behaviors. However, the symptoms are heterogeneous among patients and a number of ASD mouse models have been generated containing mutations that mimic the mutations found in human patients with ASD. Each mouse model was found to display a unique set of repetitive behaviors. In this review, we summarize the repetitive behaviors of the ASD mouse models and variations found in their neural mechanisms including molecular and electrophysiological features. We also propose potential neuronal mechanisms underlying these repetitive behaviors, focusing on the role of the cortico-basal ganglia-thalamic circuits and brain regions associated with both social and repetitive behaviors. Further understanding of molecular and circuitry mechanisms of the repetitive behaviors associated with ASD is necessary to aid the development of effective treatments for these disorders.

  16. The informative value of type of repetition: Perceptual and conceptual fluency influences on judgments of truth.

    Science.gov (United States)

    Silva, Rita R; Garcia-Marques, Teresa; Reber, Rolf

    2017-05-01

    We contrast the effects of conceptual and perceptual fluency resulting from repetition in the truth effect. In Experiment 1, participants judged either verbatim or paraphrased repetitions, which reduce perceptual similarity to original statements. Judgments were made either immediately after the first exposure to the statements or after one week. Illusions of truth emerged for both types of repetition, with delay reducing both effects. In Experiment 2, participants judged verbatim and paraphrased repetitions with either the same or a contradictory meaning of original statements. In immediate judgments, illusions of truth emerged for repetitions with the same meaning and illusions of falseness for contradictory repetitions. In the delayed session, the illusion of falseness disappeared for contradictory statements. Results are discussed in terms of the contributions of recollection of stimulus details and of perceptual and conceptual fluency to illusions of truth at different time intervals and judgmental context conditions. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Understanding work related musculoskeletal pain: does repetitive work cause stress symptoms?

    DEFF Research Database (Denmark)

    Bonde, J. P.; Mikkelsen, S.; Andersen, JH

    2005-01-01

    for development of regional pain in repetitive work, stress symptoms would likely be on the causal path. AIMS: To examine whether objective measures of repetitive monotonous work are related to occurrence and development of stress symptoms. METHODS: In 1994-95, 2033 unskilled workers with continuous repetitive...... work and 813 workers with varied work were enrolled. Measures of repetitiveness and force requirements were quantified using video observations to obtain individual exposure estimates. Stress symptoms were recorded at baseline and after approximately one, two, and three years by the Setterlind Stress...... Profile Inventory. RESULTS: Repetitive work, task cycle time, and quantified measures of repetitive upper extremity movements including force requirements were not related to occurrence of stress symptoms at baseline or development of stress symptoms during three years of follow up. CONCLUSIONS...

  18. A repetitively pulsed xenon chloride excimer laser with all ferrite magnetic cores (AFMC) based all solid state exciter

    Science.gov (United States)

    Benerji, N. S.; Varshnay, N. K.; Ghodke, D. V.; Singh, A.

    2016-10-01

    Performance of repetitively pulsed xenon chloride excimer laser (λ~308 nm) with solid state pulser consisting of magnetic pulse compression circuit (MPC) using all ferrite magnetic cores (AFMC) is reported. Laser system suitable for 100 Hz operation with inbuilt pre-ionizer, compact gas circulation and cooling has been developed and presented. In this configuration, high voltage pulses of ~8 μs duration are compressed to ~100 ns by magnetic pulse compression circuit with overall compression factor of ~80. Pulse energy of ~18 J stored in the primary capacitor is transferred to the laser head with an efficiency of ~85% compared to ~70% that is normally achieved in such configurations using annealed met-glass core. This is a significant improvement of about 21%. Maximum output laser pulse energy of ~100 mJ was achieved at repetition rate of 100 Hz with a typical pulse to pulse energy stability of ±5% and laser pulse energy of 150 mJ was generated at low rep-rate of ~40 Hz. This exciter uses a low current and low voltage solid state switch (SCR) that replaces high voltage and high current switch i. e, thyratron completely. The use of solid state exciter in turn reduces electromagnetic interference (EMI) effects particularly in excimer lasers where high EMI is present due to high di/dt. The laser is focused on a thin copper sheet for generation of micro-hole and the SEM image of the generated micro hole shows the energy stability of the laser at high repetition rate operation. Nearly homogeneous, regular and well developed xenon chloride (XeCl) laser beam spot was achieved using the laser.

  19. rTMS of the occipital cortex abolishes Braille reading and repetition priming in blind subjects.

    Science.gov (United States)

    Kupers, R; Pappens, M; de Noordhout, A Maertens; Schoenen, J; Ptito, M; Fumal, A

    2007-02-27

    To study the functional involvement of the visual cortex in Braille reading, we applied repetitive transcranial magnetic stimulation (rTMS) over midoccipital (MOC) and primary somatosensory (SI) cortex in blind subjects. After rTMS of MOC, but not SI, subjects made significantly more errors and showed an abolishment of the improvement in reading speed following repetitive presentation of the same word list, suggesting a role of the visual cortex in repetition priming in the blind.

  20. Repetitive thinking and depressive symptoms in a normal population : responses to normal negative events

    OpenAIRE

    Larsen, Simen Mjøen

    2016-01-01

    Some theories view repetitive thinking as a maladaptive coping response that exacerbates depressive symptoms and explains the sex difference in depression. Other theories view repetitive thinking as the chief mechanism for solving complex social problems. A central theoretical assumption in evolutionary psychology is that psychological mechanisms are sensitive to modern cues to ancestral fitness-relevant contexts. The measures that are currently used to probe repetitive thinking does not refl...

  1. Peripheral and central changes combine to induce motor behavioral deficits in a moderate repetition task

    OpenAIRE

    Coq, Jacques-Olivier; Barr, Ann E.; Strata, Fabrizio; Russier, Michael; Kietrys, David M; Merzenich, Michael M.; Byl, Nancy N; Barbe, Mary F

    2009-01-01

    Repetitive motion disorders, such as carpal tunnel syndrome and focal hand dystonia, can be associated with tasks that require prolonged, repetitive behaviors. Previous studies using animal models of repetitive motion have correlated cortical neuroplastic changes or peripheral tissue inflammation with fine motor performance. However, the possibility that both peripheral and central mechanisms coexist with altered motor performance has not been studied. In this study, we investigated the relat...

  2. PCR amplification of repetitive sequences as a possible approach in relative species quantification

    DEFF Research Database (Denmark)

    Ballin, Nicolai Zederkopff; Vogensen, Finn Kvist; Karlsson, Anders H

    2012-01-01

    in binary mixtures. PCR LUX primers were designed that amplify repetitive and single copy sequences to establish the species dependent number (constants) (SDC) of amplified repetitive sequences per genome. The SDCs and data from amplification of repetitive sequences were tested for their applicability...... to relatively quantify the amount of chicken DNA in a binary mixture of chicken DNA and pig DNA. However, the designed PCR primers lack the specificity required for regulatory species control....

  3. Relationship between repetitive firing and afterhyperpolarizations in human neocortical neurons.

    Science.gov (United States)

    Lorenzon, N M; Foehring, R C

    1992-02-01

    1. Human neocortical neurons fire repetitively in response to long depolarizing current injections. The slope of the relationship between average firing frequency and injected current (f-I slope) was linear or bilinear in these cells. The mean steady-state f-I slope (average of the last 500 ms of a 1-s firing episode) was 57.8 Hz/nA. The instantaneous firing rate decreased with time during a 1-s constant-current injection (spike frequency adaptation). Also, human neurons exhibited habituation in response to a 1-s current stimulus repeated every 2 s. 2. Afterhyperpolarizations (AHPs) reflect the active ionic conductances after action potentials. We studied AHPs with the use of intracellular recordings and pharmacological manipulations in the in vitro slice preparation to 1) gain insight into the ionic mechanisms underlying the AHPs and 2) elucidate the role that the underlying currents play in the functional behavior of human cortical neurons. 3. We have classified three AHPs in human neocortical neurons on the basis of their time courses: fast, medium, and slow. The amplitude of the AHPs was dependent on stimulus intensity and duration, number and frequency of spikes, and membrane potential. 4. The fast AHP had a reversal potential of -65 mV and was eliminated in extracellular Co2+, tetraethylammonium (TEA) or 4-aminopyridine, and intracellular TEA or CsCl. These manipulations also caused an increase in spike width. 5. The medium AHP had a reversal potential of -90 to -93 mV (22-24 mV hyperpolarized from mean resting potential). This AHP was reduced by Co2+, apamin, tubocurare, muscarine, norepinephrine (NE), and serotonin (5-HT). Pharmacological manipulations suggest that the medium AHP is produced in part by 1) a Ca-dependent K+ current and 2) a time-dependent anomalous rectifier (IH). 6. The slow AHP reversed at -83 to -87 mV (14-18 mV hyperpolarized from mean resting potential). This AHP was diminished by Co2+, muscarine, NE, and 5-HT. The pharmacology of the

  4. A novel repetition space-time coding scheme for mobile FSO systems

    Science.gov (United States)

    Li, Ming; Cao, Yang; Li, Shu-ming; Yang, Shao-wen

    2015-03-01

    Considering the influence of more random atmospheric turbulence, worse pointing errors and highly dynamic link on the transmission performance of mobile multiple-input multiple-output (MIMO) free space optics (FSO) communication systems, this paper establishes a channel model for the mobile platform. Based on the combination of Alamouti space-time code and time hopping ultra-wide band (TH-UWB) communications, a novel repetition space-time coding (RSTC) method for mobile 2×2 free-space optical communications with pulse position modulation (PPM) is developed. In particular, two decoding methods of equal gain combining (EGC) maximum likelihood detection (MLD) and correlation matrix detection (CMD) are derived. When a quasi-static fading and weak turbulence channel model are considered, simulation results show that whether the channel state information (CSI) is known or not, the coding system demonstrates more significant performance of the symbol error rate (SER) than the uncoding. In other words, transmitting diversity can be achieved while conveying the information only through the time delays of the modulated signals transmitted from different antennas. CMD has almost the same effect of signal combining with maximal ratio combining (MRC). However, when the channel correlation increases, SER performance of the coding 2×2 system degrades significantly.

  5. Theta-burst repetitive transcranial magnetic stimulation suppresses specific excitatory circuits in the human motor cortex.

    Science.gov (United States)

    Di Lazzaro, V; Pilato, F; Saturno, E; Oliviero, A; Dileone, M; Mazzone, P; Insola, A; Tonali, P A; Ranieri, F; Huang, Y Z; Rothwell, J C

    2005-06-15

    In four conscious patients who had electrodes implanted in the cervical epidural space for the control of pain, we recorded corticospinal volleys evoked by single-pulse transcranial magnetic stimulation (TMS) over the motor cortex before and after a 20 s period of continuous theta-burst stimulation (cTBS). It has previously been reported that this form of repetitive TMS reduces the amplitude of motor-evoked potentials (MEPs), with the maximum effect occurring at 5-10 min after the end of stimulation. The present results show that cTBS preferentially decreases the amplitude of the corticospinal I1 wave, with approximately the same time course. This is consistent with a cortical origin of the effect on the MEP. However, other protocols that lead to MEP suppression, such as short-interval intracortical inhibition, are characterized by reduced excitability of late I waves (particularly I3), suggesting that cTBS suppresses MEPs through different mechanisms, such as long-term depression in excitatory synaptic connections.

  6. Kinetic and electromyographic analysis of single repetition constant and variable resistance leg press actions.

    Science.gov (United States)

    Walker, Simon; Peltonen, Heikki; Avela, Janne; Häkkinen, Keijo

    2011-04-01

    During a multi-joint leg press action, maximal force capabilities increase with increasing knee angle. In typical resistance exercises, constant resistance is used, which does not stress the neuromuscular system at large knee angles. The purpose of this study was to compare constant and variable resistance settings using a range of contraction loads and velocities. Nine healthy, untrained males performed single contractions using four different resistance settings (constant resistance, two settings that increased resistance at large knee angles and one setting that reduced resistance at large knee angles). Single contractions using 40%, 60%, and 80% of one repetition maximum with both steady-paced and explosive contractions were assessed. Concentric force, velocity, power, and EMG (from the vastus lateralis, vastus medialis, rectus femoris, and biceps femoris muscles) were assessed at 20° segments throughout the leg press range of motion (∼60-180°). Results showed that force and rmsEMG activity was greater (Pknee angles. The results of this study show that different resistance settings affect kinetic and electromyographic characteristics, which may lead to specific long term training-induced adaptations.

  7. Maximum power operation of interacting molecular motors

    DEFF Research Database (Denmark)

    Golubeva, Natalia; Imparato, Alberto

    2013-01-01

    We study the mechanical and thermodynamic properties of different traffic models for kinesin which are relevant in biological and experimental contexts. We find that motor-motor interactions play a fundamental role by enhancing the thermodynamic efficiency at maximum power of the motors......, as compared to the non-interacting system, in a wide range of biologically compatible scenarios. We furthermore consider the case where the motor-motor interaction directly affects the internal chemical cycle and investigate the effect on the system dynamics and thermodynamics....

  8. Maximum a posteriori decoder for digital communications

    Science.gov (United States)

    Altes, Richard A. (Inventor)

    1997-01-01

    A system and method for decoding by identification of the most likely phase coded signal corresponding to received data. The present invention has particular application to communication with signals that experience spurious random phase perturbations. The generalized estimator-correlator uses a maximum a posteriori (MAP) estimator to generate phase estimates for correlation with incoming data samples and for correlation with mean phases indicative of unique hypothesized signals. The result is a MAP likelihood statistic for each hypothesized transmission, wherein the highest value statistic identifies the transmitted signal.

  9. Kernel-based Maximum Entropy Clustering

    Institute of Scientific and Technical Information of China (English)

    JIANG Wei; QU Jiao; LI Benxi

    2007-01-01

    With the development of Support Vector Machine (SVM),the "kernel method" has been studied in a general way.In this paper,we present a novel Kernel-based Maximum Entropy Clustering algorithm (KMEC).By using mercer kernel functions,the proposed algorithm is firstly map the data from their original space to high dimensional space where the data are expected to be more separable,then perform MEC clustering in the feature space.The experimental results show that the proposed method has better performance in the non-hyperspherical and complex data structure.

  10. The sun and heliosphere at solar maximum.

    Science.gov (United States)

    Smith, E J; Marsden, R G; Balogh, A; Gloeckler, G; Geiss, J; McComas, D J; McKibben, R B; MacDowall, R J; Lanzerotti, L J; Krupp, N; Krueger, H; Landgraf, M

    2003-11-14

    Recent Ulysses observations from the Sun's equator to the poles reveal fundamental properties of the three-dimensional heliosphere at the maximum in solar activity. The heliospheric magnetic field originates from a magnetic dipole oriented nearly perpendicular to, instead of nearly parallel to, the Sun's rotation axis. Magnetic fields, solar wind, and energetic charged particles from low-latitude sources reach all latitudes, including the polar caps. The very fast high-latitude wind and polar coronal holes disappear and reappear together. Solar wind speed continues to be inversely correlated with coronal temperature. The cosmic ray flux is reduced symmetrically at all latitudes.

  11. Conductivity maximum in a charged colloidal suspension

    Energy Technology Data Exchange (ETDEWEB)

    Bastea, S

    2009-01-27

    Molecular dynamics simulations of a charged colloidal suspension in the salt-free regime show that the system exhibits an electrical conductivity maximum as a function of colloid charge. We attribute this behavior to two main competing effects: colloid effective charge saturation due to counterion 'condensation' and diffusion slowdown due to the relaxation effect. In agreement with previous observations, we also find that the effective transported charge is larger than the one determined by the Stern layer and suggest that it corresponds to the boundary fluid layer at the surface of the colloidal particles.

  12. Maximum entropy signal restoration with linear programming

    Energy Technology Data Exchange (ETDEWEB)

    Mastin, G.A.; Hanson, R.J.

    1988-05-01

    Dantzig's bounded-variable method is used to express the maximum entropy restoration problem as a linear programming problem. This is done by approximating the nonlinear objective function with piecewise linear segments, then bounding the variables as a function of the number of segments used. The use of a linear programming approach allows equality constraints found in the traditional Lagrange multiplier method to be relaxed. A robust revised simplex algorithm is used to implement the restoration. Experimental results from 128- and 512-point signal restorations are presented.

  13. COMPARISON BETWEEN FORMULAS OF MAXIMUM SHIP SQUAT

    Directory of Open Access Journals (Sweden)

    PETRU SERGIU SERBAN

    2016-06-01

    Full Text Available Ship squat is a combined effect of ship’s draft and trim increase due to ship motion in limited navigation conditions. Over time, researchers conducted tests on models and ships to find a mathematical formula that can define squat. Various forms of calculating squat can be found in the literature. Among those most commonly used are of Barrass, Millward, Eryuzlu or ICORELS. This paper presents a comparison between the squat formulas to see the differences between them and which one provides the most satisfactory results. In this respect a cargo ship at different speeds was considered as a model for maximum squat calculations in canal navigation conditions.

  14. Multi-Channel Maximum Likelihood Pitch Estimation

    DEFF Research Database (Denmark)

    Christensen, Mads Græsbøll

    2012-01-01

    In this paper, a method for multi-channel pitch estimation is proposed. The method is a maximum likelihood estimator and is based on a parametric model where the signals in the various channels share the same fundamental frequency but can have different amplitudes, phases, and noise characteristics....... This essentially means that the model allows for different conditions in the various channels, like different signal-to-noise ratios, microphone characteristics and reverberation. Moreover, the method does not assume that a certain array structure is used but rather relies on a more general model and is hence...

  15. Maximum entropy PDF projection: A review

    Science.gov (United States)

    Baggenstoss, Paul M.

    2017-06-01

    We review maximum entropy (MaxEnt) PDF projection, a method with wide potential applications in statistical inference. The method constructs a sampling distribution for a high-dimensional vector x based on knowing the sampling distribution p(z) of a lower-dimensional feature z = T (x). Under mild conditions, the distribution p(x) having highest possible entropy among all distributions consistent with p(z) may be readily found. Furthermore, the MaxEnt p(x) may be sampled, making the approach useful in Monte Carlo methods. We review the theorem and present a case study in model order selection and classification for handwritten character recognition.

  16. CORA: Emission Line Fitting with Maximum Likelihood

    Science.gov (United States)

    Ness, Jan-Uwe; Wichmann, Rainer

    2011-12-01

    CORA analyzes emission line spectra with low count numbers and fits them to a line using the maximum likelihood technique. CORA uses a rigorous application of Poisson statistics. From the assumption of Poissonian noise, the software derives the probability for a model of the emission line spectrum to represent the measured spectrum. The likelihood function is used as a criterion for optimizing the parameters of the theoretical spectrum and a fixed point equation is derived allowing an efficient way to obtain line fluxes. CORA has been applied to an X-ray spectrum with the Low Energy Transmission Grating Spectrometer (LETGS) on board the Chandra observatory.

  17. Dynamical maximum entropy approach to flocking

    Science.gov (United States)

    Cavagna, Andrea; Giardina, Irene; Ginelli, Francesco; Mora, Thierry; Piovani, Duccio; Tavarone, Raffaele; Walczak, Aleksandra M.

    2014-04-01

    We derive a new method to infer from data the out-of-equilibrium alignment dynamics of collectively moving animal groups, by considering the maximum entropy model distribution consistent with temporal and spatial correlations of flight direction. When bird neighborhoods evolve rapidly, this dynamical inference correctly learns the parameters of the model, while a static one relying only on the spatial correlations fails. When neighbors change slowly and the detailed balance is satisfied, we recover the static procedure. We demonstrate the validity of the method on simulated data. The approach is applicable to other systems of active matter.

  18. Maximum Temperature Detection System for Integrated Circuits

    Science.gov (United States)

    Frankiewicz, Maciej; Kos, Andrzej

    2015-03-01

    The paper describes structure and measurement results of the system detecting present maximum temperature on the surface of an integrated circuit. The system consists of the set of proportional to absolute temperature sensors, temperature processing path and a digital part designed in VHDL. Analogue parts of the circuit where designed with full-custom technique. The system is a part of temperature-controlled oscillator circuit - a power management system based on dynamic frequency scaling method. The oscillator cooperates with microprocessor dedicated for thermal experiments. The whole system is implemented in UMC CMOS 0.18 μm (1.8 V) technology.

  19. Zipf's law and maximum sustainable growth

    CERN Document Server

    Malevergne, Y; Sornette, D

    2010-01-01

    Zipf's law states that the number of firms with size greater than S is inversely proportional to S. Most explanations start with Gibrat's rule of proportional growth but require additional constraints. We show that Gibrat's rule, at all firm levels, yields Zipf's law under a balance condition between the effective growth rate of incumbent firms (which includes their possible demise) and the growth rate of investments in entrant firms. Remarkably, Zipf's law is the signature of the long-term optimal allocation of resources that ensures the maximum sustainable growth rate of an economy.

  20. Establishing the baseline level of repetitive element expression in the human cortex

    National Research Council Canada - National Science Library

    Tyekucheva, Svitlana; Yolken, Robert H; McCombie, W Richard; Parla, Jennifer; Kramer, Melissa; Wheelan, Sarah J; Sabunciyan, Sarven

    2011-01-01

    .... Hence, we performed whole transcriptome sequencing to investigate the expression of repetitive elements in human frontal cortex using postmortem tissue obtained from the Stanley Medical Research Institute...

  1. Movement repetitions in physical and occupational therapy during spinal cord injury rehabilitation.

    Science.gov (United States)

    Zbogar, D; Eng, J J; Miller, W C; Krassioukov, A V; Verrier, M C

    2017-02-01

    Longitudinal observational study. To quantify the amount of upper- and lower-extremity movement repetitions (that is, voluntary movements as part of a functional task or specific motion) occurring during inpatient spinal cord injury (SCI), physical (PT) and occupational therapy (OT), and examine changes over the inpatient rehabilitation stay. Two stand-alone inpatient SCI rehabilitation centers. Participants: A total of 103 patients were recruited through consecutive admissions to SCI rehabilitation. Trained assistants observed therapy sessions and obtained clinical outcome measures in the second week following admission and in the second to last week before discharge. PT and OT time, upper- and lower-extremity repetitions and changes in these outcomes over the course of rehabilitation stay. We observed 561 PT and 347 OT sessions. Therapeutic time comprised two-thirds of total therapy time. Summed over PT and OT, the median upper-extremity repetitions in patients with paraplegia were 7 repetitions and in patients with tetraplegia, 42 repetitions. Lower-extremity repetitions and steps primarily occurred in ambulatory patients and amounted to 218 and 115, respectively (summed over PT and OT sessions at discharge). Wilcoxon-signed rank tests revealed that most repetition variables did not change significantly over the inpatient rehabilitation stay. In contrast, clinical outcomes for the arm and leg improved over this time period. Repetitions of upper- and lower-extremity movements are markedly low during PT and OT sessions. Despite improvements in clinical outcomes, there was no significant increase in movement repetitions over the course of inpatient rehabilitation stay.

  2. High-dose phenobarbital with intermittent short-acting barbiturates for acute encephalitis with refractory, repetitive partial seizures.

    Science.gov (United States)

    Uchida, Takashi; Takayanagi, Masaru; Kitamura, Taro; Nishio, Toshiyuki; Numata, Yurika; Endo, Wakaba; Haginoya, Kazuhiro; Ohura, Toshihiro

    2016-08-01

    Acute encephalitis with refractory, repetitive partial seizures (AERRPS) is characterized by repetitive seizures during the acute and chronic phases and has a poor neurological outcome. Burst-suppression coma via continuous i.v. infusion of a short-acting barbiturate is used to terminate refractory seizures, but the severe side-effects of short-acting barbiturates are problematic. We report on a 9-year-old boy with AERRPS who was effectively treated with very-high-dose phenobarbital (VHDPB) combined with intermittent short-acting barbiturates. VHDPB side-effects were mild, especially compared with those associated with continuous i.v. infusion of short-acting barbiturates (dosage, 40-75 mg/kg/day; maximum blood level, 290 μg/mL). Using VHDPB as the main treatment, short-acting barbiturates were used intermittently and in small amounts. This is the first report to show that VHDPB, combined with intermittent short-acting barbiturates, can effectively treat AERRPS. After treatment, convulsions were suppressed and daily life continued, but intellectual impairment and high-level dysfunction remained. © 2016 Japan Pediatric Society.

  3. Clinical application of gradient echo sequences with prolonged repetition times

    Energy Technology Data Exchange (ETDEWEB)

    Tiling, R.; Fink, U.; Deimling, M.; Bauer, W.M.; Yousry, T.; Krauss, B.

    1988-09-01

    Studies designed to optimise image contrasts of gradient echo sequences showed, that especially repetition times between 250 and 500 ms in combination with adequate echo times and flip angles provide new image contrasts. The clinical purpose of gradient echo sequences with longer TR was systematically evaluated in 450 patients. A major advantage of GE sequences was the low signal intensity of fat and bone tissue. On the other hand differnt pathologic changes showed a high signal intensity in comparison to T/sub 2/ weighted spin echo sequences as well. With the possibility of multiple slices GE sequences were of outstanding diagnostic value especially in MR of soft tissue and of the musculoskeletal system. T/sub 2/ weighted SE sequences provided no additional informations and could therefore be omitted in a great number of examinations.

  4. Repetitive Bunches from RF-Photo Gun Radiate Coherently

    CERN Document Server

    Van der Geer, C A J; Van der Geer, S B

    2004-01-01

    We consider to feed the laser wake field accelerator of the alpha-X project by a train of low charge pancake electron bunches to reduce undesired expansion due to space-charge forces. To this purpose the photo excitation laser of the rf-injector is split into a train of sub-pulses, such that each of the produced electron bunches falls into a successive ponderomotive well of the plasma accelerator. This way the total accelerated charge is not reduced. The repetitive photo gun can be tested, at low energy, by connecting it directly to the undulator and monitoring the radiation. The assertions are based on the results of new GPT simulations.

  5. Distribution of repetitions of ancestors in genealogical trees

    Science.gov (United States)

    Derrida, Bernard; Manrubia, Susanna C.; Zanette, Damián H.

    2000-06-01

    We calculate the probability distribution of repetitions of ancestors in a genealogical tree for simple neutral models of a closed population with sexual reproduction and non-overlapping generations. Each ancestor at generation g in the past has a weight w which is (up to a normalization) the number of times this ancestor appears in the genealogical tree of an individual at present. The distribution Pg( w) of these weights reaches a stationary shape P∞( w), for large g, i.e., for a large number of generations back in the past. For small w, P ∞(w) is a power law ( P∞( w)∼ wβ), with a non-trivial exponent β which can be computed exactly using a standard procedure of the renormalization group approach. Some extensions of the model are discussed and the effect of these variants on the shape of P∞( w) are analysed.

  6. Repetitive elements dynamics in cell identity programming, maintenance and disease

    KAUST Repository

    Bodega, Beatrice

    2014-12-01

    The days of \\'junk DNA\\' seem to be over. The rapid progress of genomics technologies has been unveiling unexpected mechanisms by which repetitive DNA and in particular transposable elements (TEs) have evolved, becoming key issues in understanding genome structure and function. Indeed, rather than \\'parasites\\', recent findings strongly suggest that TEs may have a positive function by contributing to tissue specific transcriptional programs, in particular as enhancer-like elements and/or modules for regulation of higher order chromatin structure. Further, it appears that during development and aging genomes experience several waves of TEs activation, and this contributes to individual genome shaping during lifetime. Interestingly, TEs activity is major target of epigenomic regulation. These findings are shedding new light on the genome-phenotype relationship and set the premises to help to explain complex disease manifestation, as consequence of TEs activity deregulation.

  7. RN-BSN curricula: designed for transition, not repetition.

    Science.gov (United States)

    Allen, Patricia E; Armstrong, Myrna L

    2013-01-01

    Combined efforts of professional mandates, employer preferences for increased educational levels of staff registered nurses (RNs), Magnet's higher environmental ratings, the Institute of Medicine report, and Aiken's (2003, 2008, & 2011) clinical research outcomes have spawn renewed attention for RN-baccalaureate degree of science in nursing (BSN) education. Yet, nationally, only 21.6% of associate degree nurses are continuing their education (Health Resources and Services Administration, 2010). Designing programs with the student as the center, where student/faculty engagement is the goal, has enabled one school of nursing to develop a quality on-line RN-to-BSN program. Core values of the program reveal a faculty who is committed to development of education to transition the associate degree and/or diploma graduate to professional nursing practice without repetition of content and learning activities.

  8. Repetition blindness for natural images of objects with viewpoint changes

    Directory of Open Access Journals (Sweden)

    Stephane eBuffat

    2013-01-01

    Full Text Available When stimuli are repeated in a rapid serial visual presentation (RSVP, observers sometimes fail to report the second occurrence of a target. This phenomenon is referred to as repetition blindness (RB. We report an RSVP experiment with photographs in which we manipulated object viewpoints between the first and second occurrences of a target (0-, 45-, or 90-degree changes, and spatial frequency content. Natural images were spatially filtered to produce low, medium, or high spatial-frequency stimuli. RB was observed for all filtering conditions. Surprisingly, for full-spectrum images, RB increased significantly as the viewpoint reached 90 degrees. For filtered images, a similar pattern of results was found for all conditions except for medium spatial-frequency stimuli. These findings suggest that object recognition in RSVP are subtended by viewpoint-specific representations for all spatial frequencies except medium ones.

  9. Simple filtered repetitively pulsed vacuum arc plasma source

    Science.gov (United States)

    Chekh, Yu.; Zhirkov, I. S.; Delplancke-Ogletree, M. P.

    2010-02-01

    A very simple design of cathodic filtered vacuum arc plasma source is proposed. The source without filter has only four components and none of them require precise machining. The source operates in a repetitively pulsed regime, and for laboratory experiments it can be used without water cooling. Despite the simple construction, the source provides high ion current at the filter outlet reaching 2.5% of 400 A arc current, revealing stable operation in a wide pressure range from high vacuum to oxygen pressure up to more than 10-2 mbar. There is no need in complicated power supply system for this plasma source, only one power supply can be used to ignite the arc, to provide the current for the arc itself, to generate the magnetic field in the filter, and provide its positive electric biasing without any additional high power resistance.

  10. Resistive Wall Heating of the Undulator in High Repetition Rate

    Energy Technology Data Exchange (ETDEWEB)

    Qiang, J; Corlett, J; Emma, P; Wu, J

    2012-05-20

    In next generation high repetition rate FELs, beam energy loss due to resistive wall wakefields will produce significant amount of heat. The heat load for a superconducting undulator (operating at low temperature), must be removed and will be expensive to remove. In this paper, we study this effect in an undulator proposed for a Next Generation Light Source (NGLS) at LBNL. We benchmark our calculations with measurements at the LCLS and carry out detailed parameter studies using beam from a start-to-end simulation. Our preliminarym results suggest that the heat load in the undulator is about 2 W/m or lower with an aperture size of 6 mm for nominal NGLS preliminary design parameters.

  11. A high repetition rate XUV seeding source for FLASH2

    Energy Technology Data Exchange (ETDEWEB)

    Willner, Arik

    2012-05-15

    Improved performance of free-electron laser (FEL) light sources in terms of timing stability, pulse shape and spectral properties of the amplified FEL pulses is of interest in material science, the fields of ultrafast dynamics, biology, chemistry and even special branches in industry. A promising scheme for such an improvement is direct seeding with high harmonic generation (HHG) in a noble gas target. A free-electron laser seeded by an external extreme ultraviolet (XUV) source is planned for FLASH2 at DESY in Hamburg. The requirements for the XUV/soft X-ray source can be summarized as follows: A repetition rate of at least 100 kHz in a 10 Hz burst is needed at variable wavelengths from 10 to 40 nm and pulse energies of several nJ within a single laser harmonic. This application requires a laser amplifier system with exceptional parameters, mJ-level pulse energy, 10-15 fs pulse duration at 100 kHz (1 MHz) burst repetition rate. A new optical parametric chirped-pulse amplification (OPCPA) system is under development in order to meet these requirements, and very promising results have been achieved in the last three years. In parallel to this development, a new HHG concept is necessary to sustain high average power of the driving laser system and to generate harmonics with high conversion efficiencies. Currently, the highest conversion efficiency with HHG has been demonstrated using gas-filled capillary targets. For our application, only a free-jet target can be used for HHG, in order to overcome damage threshold limitations of HHG target optics at a high repetition rate. A novel dual-gas multijet gas target has been developed and first experiments show remarkable control of the degree of phase matching forming the basis for improved control of the harmonic photon flux and the XUV pulse characteristics. The basic idea behind the dual-gas concept is the insertion of matching zones in between multiple HHG sources. These matching sections are filled with hydrogen which

  12. Intrinsic and extrinsic motivation for stereotypic and repetitive behavior.

    Science.gov (United States)

    Joosten, Annette V; Bundy, Anita C; Einfeld, Stewart L

    2009-03-01

    This study provides evidence for intrinsic and extrinsic motivators for stereotypical and repetitive behavior in children with autism and intellectual disability and children with intellectual disability alone. We modified the Motivation Assessment Scale (MAS) (1988b); dividing it into intrinsic and extrinsic measures and adding items to assess anxiety as an intrinsic motivator. Rasch analysis of data from 279 MASs (74 children) revealed that the items formed two unidimensional scales. Anxiety was a more likely intrinsic motivator than sensory seeking for children with dual diagnoses; the reverse was true for children with intellectual disability only. Escape and gaining a tangible object were the most common extrinsic motivators for those with dual diagnoses and attention and escape for children with intellectual disability.

  13. Accurate structural correlations from maximum likelihood superpositions.

    Directory of Open Access Journals (Sweden)

    Douglas L Theobald

    2008-02-01

    Full Text Available The cores of globular proteins are densely packed, resulting in complicated networks of structural interactions. These interactions in turn give rise to dynamic structural correlations over a wide range of time scales. Accurate analysis of these complex correlations is crucial for understanding biomolecular mechanisms and for relating structure to function. Here we report a highly accurate technique for inferring the major modes of structural correlation in macromolecules using likelihood-based statistical analysis of sets of structures. This method is generally applicable to any ensemble of related molecules, including families of nuclear magnetic resonance (NMR models, different crystal forms of a protein, and structural alignments of homologous proteins, as well as molecular dynamics trajectories. Dominant modes of structural correlation are determined using principal components analysis (PCA of the maximum likelihood estimate of the correlation matrix. The correlations we identify are inherently independent of the statistical uncertainty and dynamic heterogeneity associated with the structural coordinates. We additionally present an easily interpretable method ("PCA plots" for displaying these positional correlations by color-coding them onto a macromolecular structure. Maximum likelihood PCA of structural superpositions, and the structural PCA plots that illustrate the results, will facilitate the accurate determination of dynamic structural correlations analyzed in diverse fields of structural biology.

  14. Maximum entropy production and the fluctuation theorem

    Energy Technology Data Exchange (ETDEWEB)

    Dewar, R C [Unite EPHYSE, INRA Centre de Bordeaux-Aquitaine, BP 81, 33883 Villenave d' Ornon Cedex (France)

    2005-05-27

    Recently the author used an information theoretical formulation of non-equilibrium statistical mechanics (MaxEnt) to derive the fluctuation theorem (FT) concerning the probability of second law violating phase-space paths. A less rigorous argument leading to the variational principle of maximum entropy production (MEP) was also given. Here a more rigorous and general mathematical derivation of MEP from MaxEnt is presented, and the relationship between MEP and the FT is thereby clarified. Specifically, it is shown that the FT allows a general orthogonality property of maximum information entropy to be extended to entropy production itself, from which MEP then follows. The new derivation highlights MEP and the FT as generic properties of MaxEnt probability distributions involving anti-symmetric constraints, independently of any physical interpretation. Physically, MEP applies to the entropy production of those macroscopic fluxes that are free to vary under the imposed constraints, and corresponds to selection of the most probable macroscopic flux configuration. In special cases MaxEnt also leads to various upper bound transport principles. The relationship between MaxEnt and previous theories of irreversible processes due to Onsager, Prigogine and Ziegler is also clarified in the light of these results. (letter to the editor)

  15. Thermodynamic hardness and the maximum hardness principle

    Science.gov (United States)

    Franco-Pérez, Marco; Gázquez, José L.; Ayers, Paul W.; Vela, Alberto

    2017-08-01

    An alternative definition of hardness (called the thermodynamic hardness) within the grand canonical ensemble formalism is proposed in terms of the partial derivative of the electronic chemical potential with respect to the thermodynamic chemical potential of the reservoir, keeping the temperature and the external potential constant. This temperature dependent definition may be interpreted as a measure of the propensity of a system to go through a charge transfer process when it interacts with other species, and thus it keeps the philosophy of the original definition. When the derivative is expressed in terms of the three-state ensemble model, in the regime of low temperatures and up to temperatures of chemical interest, one finds that for zero fractional charge, the thermodynamic hardness is proportional to T-1(I -A ) , where I is the first ionization potential, A is the electron affinity, and T is the temperature. However, the thermodynamic hardness is nearly zero when the fractional charge is different from zero. Thus, through the present definition, one avoids the presence of the Dirac delta function. We show that the chemical hardness defined in this way provides meaningful and discernible information about the hardness properties of a chemical species exhibiting integer or a fractional average number of electrons, and this analysis allowed us to establish a link between the maximum possible value of the hardness here defined, with the minimum softness principle, showing that both principles are related to minimum fractional charge and maximum stability conditions.

  16. Maximum Likelihood Analysis in the PEN Experiment

    Science.gov (United States)

    Lehman, Martin

    2013-10-01

    The experimental determination of the π+ -->e+ ν (γ) decay branching ratio currently provides the most accurate test of lepton universality. The PEN experiment at PSI, Switzerland, aims to improve the present world average experimental precision of 3 . 3 ×10-3 to 5 ×10-4 using a stopped beam approach. During runs in 2008-10, PEN has acquired over 2 ×107 πe 2 events. The experiment includes active beam detectors (degrader, mini TPC, target), central MWPC tracking with plastic scintillator hodoscopes, and a spherical pure CsI electromagnetic shower calorimeter. The final branching ratio will be calculated using a maximum likelihood analysis. This analysis assigns each event a probability for 5 processes (π+ -->e+ ν , π+ -->μ+ ν , decay-in-flight, pile-up, and hadronic events) using Monte Carlo verified probability distribution functions of our observables (energies, times, etc). A progress report on the PEN maximum likelihood analysis will be presented. Work supported by NSF grant PHY-0970013.

  17. Pancreatic Cancer: 80 Years of Surgery—Percentage and Repetitions

    Directory of Open Access Journals (Sweden)

    Birgir Gudjonsson

    2016-01-01

    Full Text Available Objective. The incidence of pancreatic cancer is estimated to be 48,960 in 2015 in the US and projected to become the second and third leading causes of cancer-related deaths by 2030. The mean costs in 2015 may be assumed to be $79,800 per patient and for each resection $164,100. Attempt is made to evaluate the results over the last 80 years, the number of survivors, and the overall survival percentage. Methods. Altogether 1230 papers have been found which deal with resections and reveal survival information. Only 621 of these report 5-year survivors. Reservation about surgery was first expressed in 1964 and five-year survival of nonresected survivors is well documented. Results. The survival percentage depends not only on the number of survivors but also on the subset from which it is calculated. Since the 1980s the papers have mainly reported the number of resections and survival as actuarial percentages, with or without the actual number of survivors being reported. The actuarial percentage is on average 2.75 higher. Detailed information on the original group (TN, number of resections, and actual number of survivors is reported in only 10.6% of the papers. Repetition occurs when the patients from a certain year are reported several times from the same institution or include survivors from many institutions or countries. Each 5-year survivor may be reported several times. Conclusion. Assuming a 10% resection rate and correcting for repetitions and the life table percentage the overall actual survival rate is hardly more than 0.3%.

  18. Dissecting the functional anatomy of auditory word repetition

    Directory of Open Access Journals (Sweden)

    Thomas Matthew Hadley Hope

    2014-05-01

    Full Text Available Auditory word repetition involves many different brain regions, whose functions are still far from fully understood. Here, we use a single, multi-factorial, within-subjects fMRI design to identify those regions, and to functionally distinguish the multiple linguistic and non-linguistic processing areas that are all involved in repeating back heard words. The study compared: (1 auditory to visual inputs; (2 phonological to non-phonological inputs; (3 semantic to non-semantic inputs; and (4 speech production to finger-press responses. The stimuli included words (semantic and phonological inputs, pseudowords (phonological input, pictures and sounds of animals or objects (semantic input, and coloured patterns and hums (non-semantic and non-phonological. The speech production tasks involved auditory repetition, reading and naming while the finger press tasks involved one-back matching.The results from the main effects and interactions were compared to predictions from a previously reported functional anatomical model of language based on a meta-analysis of many different neuroimaging experiments. Although many findings from the current experiment replicated those predicted, our within-subject design also revealed novel results by providing sufficient anatomical precision to distinguish several different regions within: (1 the anterior insula (a dorsal region involved in both covert and overt speech production, and a more ventral region involved in overt speech only; (2 the pars orbitalis (with distinct sub-regions responding to phonological and semantic processing; (3 the anterior cingulate and SMA (whose subregions show differential sensitivity to speech and finger press responses; and (4 the cerebellum (with distinct regions for semantic processing, speech production and domain general processing. We also dissociated four different types of phonological effects in, respectively, the left superior temporal sulcus, left putamen, left ventral premoto

  19. Repetitive Pediatric Anesthesia in a Non-Hospital Setting

    Energy Technology Data Exchange (ETDEWEB)

    Buchsbaum, Jeffrey C., E-mail: jbuchsba@iupui.edu [Department of Radiation Oncology, Indiana University School of Medicine, Indianapolis, Indiana (United States); Indiana University Health Proton Therapy Center, Bloomington, Indiana (United States); McMullen, Kevin P.; Douglas, James G. [Department of Radiation Oncology, Indiana University School of Medicine, Indianapolis, Indiana (United States); Indiana University Health Proton Therapy Center, Bloomington, Indiana (United States); Jackson, Jeffrey L.; Simoneaux, R. Victor; Hines, Matthew; Bratton, Jennifer; Kerstiens, John [Indiana University Health Proton Therapy Center, Bloomington, Indiana (United States); Johnstone, Peter A.S. [Department of Radiation Oncology, Indiana University School of Medicine, Indianapolis, Indiana (United States); Indiana University Health Proton Therapy Center, Bloomington, Indiana (United States)

    2013-04-01

    Purpose: Repetitive sedation/anesthesia (S/A) for children receiving fractionated radiation therapy requires induction and recovery daily for several weeks. In the vast majority of cases, this is accomplished in an academic center with direct access to pediatric faculty and facilities in case of an emergency. Proton radiation therapy centers are more frequently free-standing facilities at some distance from specialized pediatric care. This poses a potential dilemma in the case of children requiring anesthesia. Methods and Materials: The records of the Indiana University Health Proton Therapy Center were reviewed for patients requiring anesthesia during proton beam therapy (PBT) between June 1, 2008, and April 12, 2012. Results: A total of 138 children received daily anesthesia during this period. A median of 30 fractions (range, 1-49) was delivered over a median of 43 days (range, 1-74) for a total of 4045 sedation/anesthesia procedures. Three events (0.0074%) occurred, 1 fall from a gurney during anesthesia recovery and 2 aspiration events requiring emergency department evaluation. All 3 children did well. One aspiration patient needed admission to the hospital and mechanical ventilation support. The other patient returned the next day for treatment without issue. The patient who fell was not injured. No patient required cessation of therapy. Conclusions: This is the largest reported series of repetitive pediatric anesthesia in radiation therapy, and the only available data from the proton environment. Strict adherence to rigorous protocols and a well-trained team can safely deliver daily sedation/anesthesia in free-standing proton centers.

  20. Maximum imaging depth of two-photon autofluorescence microscopy in epithelial tissues.

    Science.gov (United States)

    Durr, Nicholas J; Weisspfennig, Christian T; Holfeld, Benjamin A; Ben-Yakar, Adela

    2011-02-01

    Endogenous fluorescence provides morphological, spectral, and lifetime contrast that can indicate disease states in tissues. Previous studies have demonstrated that two-photon autofluorescence microscopy (2PAM) can be used for noninvasive, three-dimensional imaging of epithelial tissues down to approximately 150 μm beneath the skin surface. We report ex-vivo 2PAM images of epithelial tissue from a human tongue biopsy down to 370 μm below the surface. At greater than 320 μm deep, the fluorescence generated outside the focal volume degrades the image contrast to below one. We demonstrate that these imaging depths can be reached with 160 mW of laser power (2-nJ per pulse) from a conventional 80-MHz repetition rate ultrafast laser oscillator. To better understand the maximum imaging depths that we can achieve in epithelial tissues, we studied image contrast as a function of depth in tissue phantoms with a range of relevant optical properties. The phantom data agree well with the estimated contrast decays from time-resolved Monte Carlo simulations and show maximum imaging depths similar to that found in human biopsy results. This work demonstrates that the low staining inhomogeneity (∼ 20) and large scattering coefficient (∼ 10 mm(-1)) associated with conventional 2PAM limit the maximum imaging depth to 3 to 5 mean free scattering lengths deep in epithelial tissue.

  1. Lake Basin Fetch and Maximum Length/Width

    Data.gov (United States)

    Minnesota Department of Natural Resources — Linear features representing the Fetch, Maximum Length and Maximum Width of a lake basin. Fetch, maximum length and average width are calcuated from the lake polygon...

  2. Effects of systemic hypoxia on human muscular adaptations to resistance exercise training

    OpenAIRE

    Kon, Michihiro; Ohiwa, Nao; Honda, Akiko; Matsubayashi, Takeo; Ikeda, Tatsuaki; Akimoto, Takayuki; Suzuki, Yasuhiro; Hirano, Yuichi; Russell, Aaron P.

    2014-01-01

    Abstract Hypoxia is an important modulator of endurance exercise‐induced oxidative adaptations in skeletal muscle. However, whether hypoxia affects resistance exercise‐induced muscle adaptations remains unknown. Here, we determined the effect of resistance exercise training under systemic hypoxia on muscular adaptations known to occur following both resistance and endurance exercise training, including muscle cross‐sectional area (CSA), one‐repetition maximum (1RM), muscular endurance, and ma...

  3. Hemispheric Asymmetries in Repetition Enhancement and Suppression Effects in the Newborn Brain.

    Directory of Open Access Journals (Sweden)

    Camillia Bouchon

    Full Text Available The repeated presentation of stimuli typically attenuates neural responses (repetition suppression or, less commonly, increases them (repetition enhancement when stimuli are highly complex, degraded or presented under noisy conditions. In adult functional neuroimaging research, these repetition effects are considered as neural correlates of habituation. The development and respective functional significance of these effects in infancy remain largely unknown.This study investigates repetition effects in newborns using functional near-infrared spectroscopy, and specifically the role of stimulus complexity in evoking a repetition enhancement vs. a repetition suppression response, following up on Gervain et al. (2008. In that study, abstract rule-learning was found at birth in cortical areas specific to speech processing, as evidenced by a left-lateralized repetition enhancement of the hemodynamic response to highly variable speech sequences conforming to a repetition-based ABB artificial grammar, but not to a random ABC grammar.Here, the same paradigm was used to investigate how simpler stimuli (12 different sequences per condition as opposed to 140, and simpler presentation conditions (blocked rather than interleaved would influence repetition effects at birth.Results revealed that the two grammars elicited different dynamics in the two hemispheres. In left fronto-temporal areas, we reproduce the early perceptual discrimination of the two grammars, with ABB giving rise to a greater response at the beginning of the experiment than ABC. In addition, the ABC grammar evoked a repetition enhancement effect over time, whereas a stable response was found for the ABB grammar. Right fronto-temporal areas showed neither initial discrimination, nor change over time to either pattern.Taken together with Gervain et al. (2008, this is the first evidence that manipulating methodological factors influences the presence or absence of neural repetition enhancement

  4. Maximum entropy principle and texture formation

    CERN Document Server

    Arminjon, M; Arminjon, Mayeul; Imbault, Didier

    2006-01-01

    The macro-to-micro transition in a heterogeneous material is envisaged as the selection of a probability distribution by the Principle of Maximum Entropy (MAXENT). The material is made of constituents, e.g. given crystal orientations. Each constituent is itself made of a large number of elementary constituents. The relevant probability is the volume fraction of the elementary constituents that belong to a given constituent and undergo a given stimulus. Assuming only obvious constraints in MAXENT means describing a maximally disordered material. This is proved to have the same average stimulus in each constituent. By adding a constraint in MAXENT, a new model, potentially interesting e.g. for texture prediction, is obtained.

  5. MLDS: Maximum Likelihood Difference Scaling in R

    Directory of Open Access Journals (Sweden)

    Kenneth Knoblauch

    2008-01-01

    Full Text Available The MLDS package in the R programming language can be used to estimate perceptual scales based on the results of psychophysical experiments using the method of difference scaling. In a difference scaling experiment, observers compare two supra-threshold differences (a,b and (c,d on each trial. The approach is based on a stochastic model of how the observer decides which perceptual difference (or interval (a,b or (c,d is greater, and the parameters of the model are estimated using a maximum likelihood criterion. We also propose a method to test the model by evaluating the self-consistency of the estimated scale. The package includes an example in which an observer judges the differences in correlation between scatterplots. The example may be readily adapted to estimate perceptual scales for arbitrary physical continua.

  6. Maximum Profit Configurations of Commercial Engines

    Directory of Open Access Journals (Sweden)

    Yiran Chen

    2011-06-01

    Full Text Available An investigation of commercial engines with finite capacity low- and high-price economic subsystems and a generalized commodity transfer law [n ∝ Δ (P m] in commodity flow processes, in which effects of the price elasticities of supply and demand are introduced, is presented in this paper. Optimal cycle configurations of commercial engines for maximum profit are obtained by applying optimal control theory. In some special cases, the eventual state—market equilibrium—is solely determined by the initial conditions and the inherent characteristics of two subsystems; while the different ways of transfer affect the model in respects of the specific forms of the paths of prices and the instantaneous commodity flow, i.e., the optimal configuration.

  7. Maximum Segment Sum, Monadically (distilled tutorial

    Directory of Open Access Journals (Sweden)

    Jeremy Gibbons

    2011-09-01

    Full Text Available The maximum segment sum problem is to compute, given a list of integers, the largest of the sums of the contiguous segments of that list. This problem specification maps directly onto a cubic-time algorithm; however, there is a very elegant linear-time solution too. The problem is a classic exercise in the mathematics of program construction, illustrating important principles such as calculational development, pointfree reasoning, algebraic structure, and datatype-genericity. Here, we take a sideways look at the datatype-generic version of the problem in terms of monadic functional programming, instead of the traditional relational approach; the presentation is tutorial in style, and leavened with exercises for the reader.

  8. Maximum Information and Quantum Prediction Algorithms

    CERN Document Server

    McElwaine, J N

    1997-01-01

    This paper describes an algorithm for selecting a consistent set within the consistent histories approach to quantum mechanics and investigates its properties. The algorithm uses a maximum information principle to select from among the consistent sets formed by projections defined by the Schmidt decomposition. The algorithm unconditionally predicts the possible events in closed quantum systems and ascribes probabilities to these events. A simple spin model is described and a complete classification of all exactly consistent sets of histories formed from Schmidt projections in the model is proved. This result is used to show that for this example the algorithm selects a physically realistic set. Other tentative suggestions in the literature for set selection algorithms using ideas from information theory are discussed.

  9. Maximum process problems in optimal control theory

    Directory of Open Access Journals (Sweden)

    Goran Peskir

    2005-01-01

    Full Text Available Given a standard Brownian motion (Btt≥0 and the equation of motion dXt=vtdt+2dBt, we set St=max0≤s≤tXs and consider the optimal control problem supvE(Sτ−Cτ, where c>0 and the supremum is taken over all admissible controls v satisfying vt∈[μ0,μ1] for all t up to τ=inf{t>0|Xt∉(ℓ0,ℓ1} with μ0g∗(St, where s↦g∗(s is a switching curve that is determined explicitly (as the unique solution to a nonlinear differential equation. The solution found demonstrates that the problem formulations based on a maximum functional can be successfully included in optimal control theory (calculus of variations in addition to the classic problem formulations due to Lagrange, Mayer, and Bolza.

  10. Maximum Spectral Luminous Efficacy of White Light

    CERN Document Server

    Murphy, T W

    2013-01-01

    As lighting efficiency improves, it is useful to understand the theoretical limits to luminous efficacy for light that we perceive as white. Independent of the efficiency with which photons are generated, there exists a spectrally-imposed limit to the luminous efficacy of any source of photons. We find that, depending on the acceptable bandpass and---to a lesser extent---the color temperature of the light, the ideal white light source achieves a spectral luminous efficacy of 250--370 lm/W. This is consistent with previous calculations, but here we explore the maximum luminous efficacy as a function of photopic sensitivity threshold, color temperature, and color rendering index; deriving peak performance as a function of all three parameters. We also present example experimental spectra from a variety of light sources, quantifying the intrinsic efficacy of their spectral distributions.

  11. Maximum entropy model for business cycle synchronization

    Science.gov (United States)

    Xi, Ning; Muneepeerakul, Rachata; Azaele, Sandro; Wang, Yougui

    2014-11-01

    The global economy is a complex dynamical system, whose cyclical fluctuations can mainly be characterized by simultaneous recessions or expansions of major economies. Thus, the researches on the synchronization phenomenon are key to understanding and controlling the dynamics of the global economy. Based on a pairwise maximum entropy model, we analyze the business cycle synchronization of the G7 economic system. We obtain a pairwise-interaction network, which exhibits certain clustering structure and accounts for 45% of the entire structure of the interactions within the G7 system. We also find that the pairwise interactions become increasingly inadequate in capturing the synchronization as the size of economic system grows. Thus, higher-order interactions must be taken into account when investigating behaviors of large economic systems.

  12. Quantum gravity momentum representation and maximum energy

    Science.gov (United States)

    Moffat, J. W.

    2016-11-01

    We use the idea of the symmetry between the spacetime coordinates xμ and the energy-momentum pμ in quantum theory to construct a momentum space quantum gravity geometry with a metric sμν and a curvature tensor Pλ μνρ. For a closed maximally symmetric momentum space with a constant 3-curvature, the volume of the p-space admits a cutoff with an invariant maximum momentum a. A Wheeler-DeWitt-type wave equation is obtained in the momentum space representation. The vacuum energy density and the self-energy of a charged particle are shown to be finite, and modifications of the electromagnetic radiation density and the entropy density of a system of particles occur for high frequencies.

  13. Video segmentation using Maximum Entropy Model

    Institute of Scientific and Technical Information of China (English)

    QIN Li-juan; ZHUANG Yue-ting; PAN Yun-he; WU Fei

    2005-01-01

    Detecting objects of interest from a video sequence is a fundamental and critical task in automated visual surveillance.Most current approaches only focus on discriminating moving objects by background subtraction whether or not the objects of interest can be moving or stationary. In this paper, we propose layers segmentation to detect both moving and stationary target objects from surveillance video. We extend the Maximum Entropy (ME) statistical model to segment layers with features, which are collected by constructing a codebook with a set of codewords for each pixel. We also indicate how the training models are used for the discrimination of target objects in surveillance video. Our experimental results are presented in terms of the success rate and the segmenting precision.

  14. Identification of two new repetitive elements and chromosomal mapping of repetitive DNA sequences in the fish Gymnothorax unicolor (Anguilliformes: Muraenidae

    Directory of Open Access Journals (Sweden)

    E. Coluccia

    2011-05-01

    Full Text Available Muraenidae is a species-rich family, with relationships among genera and species and taxonomy that have not been completely clarified. Few cytogenetic studies have been conducted on this family, and all of them showed the same diploid chromosome number (2n=42 but with conspicuous karyotypic variation among species. The Mediterranean moray eel Gymnothorax unicolor was previously cytogenetically studied using classical techniques that allowed the characterization of its karyotype structure and the constitutive heterochromatin and argyrophilic nucleolar organizer regions (Ag-NORs distribution pattern. In the present study, we describe two new repetitive elements (called GuMboI and GuDdeI obtained from restricted genomic DNA of G. unicolor that were characterized by Southern blot and physically localized by in situ hybridization on metaphase chromosomes. As they are highly repetitive DNA sequences, they map in heterochromatic regions. However, while GuDdeI was localized in the centromeric regions, the GuMboI fraction was distributed on some centromeres and was co-localized with the nucleolus organizer region (NOR. Comparative analysis with other Mediterranean species such as Muraena helena pointed out that these DNA fractions are species-specific and could potentially be used for species discrimination. As a new contribution to the karyotype of this species, we found that the major ribosomal genes are localized on acrocentric chromosome 9 and that the telomeres of each chromosome are composed of a tandem repeat derived from a poly-TTAGGG DNA sequence, as it occurs in most vertebrate species. The results obtained add new information useful in comparative genomics at the chromosomal level and contribute to the cytogenetic knowledge regarding this fish family, which has not been extensively studied.

  15. The effects of high resistance-few repetitions and low resistance-high repetitions resistance training on climbing performance.

    Science.gov (United States)

    Hermans, Espen; Andersen, Vidar; Saeterbakken, Atle Hole

    2017-05-01

    The aim of the study was to compare the effects of different strength training intensities on climbing performance, climbing-specific tests and a general strength test. Thirty lower grade and intermediate-level climbers participated in a 10-week training programme. The participants were randomized into three groups: high resistance-few repetitions training groups (HR-FR), low resistance-high repetitions training groups (LR-HR) and a control group (CON) which continued climbing/training as usual. Post-testing results demonstrated statistical tendencies for climbing performance improvements in the HR-FR and LR-HR (p = 0.088-0.090, effect size = 0.55-0.73), but no differences were observed between the groups (p = 0.950). For the climbing-specific tests, no differences were observed between the groups (p = 0.507-1.000), but the HR-FR and LR-HR improved their time in both Dead-hang (p = 0.004-0.026) and Bent-arm hang (p training groups reduced their climbing sessions during the intervention compared to the CON group (p = 0.057-0.074). In conclusion, HR-FR and LR-HR training programmes demonstrated an 11% and 12% non-significant improvement in climbing performance despite a 50% reduction in climbing sessions, but improved the results in strength and climbing-specific tests. None of the training intensities was superior compared to the others.

  16. Evaluation of pliers' grip spans in the maximum gripping task and sub-maximum cutting task.

    Science.gov (United States)

    Kim, Dae-Min; Kong, Yong-Ku

    2016-12-01

    A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.

  17. Cosmic shear measurement with maximum likelihood and maximum a posteriori inference

    CERN Document Server

    Hall, Alex

    2016-01-01

    We investigate the problem of noise bias in maximum likelihood and maximum a posteriori estimators for cosmic shear. We derive the leading and next-to-leading order biases and compute them in the context of galaxy ellipticity measurements, extending previous work on maximum likelihood inference for weak lensing. We show that a large part of the bias on these point estimators can be removed using information already contained in the likelihood when a galaxy model is specified, without the need for external calibration. We test these bias-corrected estimators on simulated galaxy images similar to those expected from planned space-based weak lensing surveys, with very promising results. We find that the introduction of an intrinsic shape prior mitigates noise bias, such that the maximum a posteriori estimate can be made less biased than the maximum likelihood estimate. Second-order terms offer a check on the convergence of the estimators, but are largely sub-dominant. We show how biases propagate to shear estima...

  18. Postactivation potentiation on repeated-sprint ability in elite handball players.

    Science.gov (United States)

    Okuno, Nilo M; Tricoli, Valmor; Silva, Salomão B C; Bertuzzi, Rômulo; Moreira, Alexandre; Kiss, Maria A P D M

    2013-03-01

    The aim of this study was to analyze the changes on repeated-sprint ability (RSA) performance after heavy load exercise in elite handball players. Twelve subjects were submitted to the following experimental sessions: (a) 1-repetition maximum (1RM) test on the half squat exercise, (b) RSA test (control condition), and (c) RSA with a conditioning activity on the same exercise as 1RM test (experimental condition). The conditioning activity comprised 1 set of 5 × 50% 1RM, 1 set of 3 × 70% 1RM, and 5 sets of 1 × 90% 1RM. A significant improvement in the best sprint time (RSAbest) and mean sprint time (RSAmean) was observed with the conditioning activity (RSAbest = 5.74 ± 0.16 seconds; RSAmean = 5.99 ± 0.19 seconds) when compared with the situation without the conditioning activity (RSAbest = 5.82 ± 0.15 seconds; RSAmean = 6.06 ± 0.18 seconds; p < 0.01) with a moderate (Cohen's d = -0.54) and small effect (Cohen's d = -0.41) to RSAbest and RSAmean, respectively. Therefore, the findings of this study demonstrated that prior heavy load exercise can be used to improve the RSA performance, however, with a small to moderate magnitude of change.

  19. Effects of short-term detraining following blood flow restricted low-intensity training on muscle size and strength.

    Science.gov (United States)

    Yasuda, Tomohiro; Loenneke, Jeremy P; Ogasawara, Riki; Abe, Takashi

    2015-01-01

    We investigated the effects of 3 weeks of detraining on muscle cross-sectional area (CSA) and one-repetition maximum strength (1-RM) in young men who had previously participated in 6 weeks (3 days week(-1) ) of bench press training [blood flow restricted low-intensity (LI-BFR; n = 10, 20% 1-RM) or high-intensity (HI; n = 7, 75% 1-RM)]. Bench press 1-RM and muscle CSA of triceps brachii (TB) and pectoralis major (PM) were evaluated before (pre) and after training period (post) as well as after detraining period (detraining). Bench press 1-RM was higher at both post and detraining than at pre for LI-BFR (Pmuscle CSA were higher at both post and detraining than at pre for the HI group (Pmuscle CSA) was higher at both post and detraining than at pre for the HI group (Pmuscle strength following 6 weeks of training with LI-BFR as well as HI was well preserved at 3 weeks of detraining. HI-induced muscle strength appears to be dependent upon both neural adaptations and muscle hypertrophy with training and detraining. On the other hand, LI-BFR-induced muscle strength appears to be related primarily to muscle hypertrophy with training and to neural adaptations with detraining.

  20. Oxidative stress and antioxidant responses to progressive resistance exercise intensity in trained and untrained males

    Directory of Open Access Journals (Sweden)

    H Çakır-Atabek

    2015-11-01

    Full Text Available The relationship between oxidative stress and some exercise components of resistance exercise (e.g. intensity, exercise volume has not been clearly defined. Additionally, the oxidative stress markers may respond differently in various conditions. This study aims to determine the effects of progressive intensity of resistance exercise (RE on oxidative stress and antioxidants in trained and untrained men, and also to investigate the possible threshold intensity required to evoke oxidative stress. RE trained (N=8 and untrained (N=8 men performed the leg extension RE at progressive intensities standardized for total volume: 1x17 reps at 50% of one-repetition maximum (1RM; 1x14 reps at 60% of 1RM; 1x12 reps at 70% of 1RM; 2x5 reps at 80% of 1RM; and 3x3 reps at 90% of 1RM. Blood samples were drawn before (PRE and immediately after each intensity, and after 30 minutes, 60 minutes and 24 hours following the RE. Lipid-hydroperoxide (LHP significantly increased during the test and then decreased during the recovery in both groups (p0.05. Standardized volume of RE increased oxidative stress responses. Our study suggests that lower intensity (50% is enough to increase LHP, whereas higher intensity (more than 80% is required to evoke protein oxidation.

  1. The Action Plan Against Repetitive Work - An Industrial Relation Strategy for Improving the Working Environment

    DEFF Research Database (Denmark)

    Hasle, Peter; Møller, Niels

    2001-01-01

    The Danish Action Plan against Repetitive Work is presented and discussed as a possible new strategy for regulating repetitive work as well as other complicated working environment problems. The article is based on an empirical evaluation ot the Action Plan. The asseessment of the Action Plan ind...... and industrial relation agreements can be used to regulate other working environment problems....

  2. Nonword Repetition and Phoneme Elision in Adults Who Do and Do Not Stutter

    Science.gov (United States)

    Byrd, Courtney T.; Vallely, Megann; Anderson, Julie D.; Sussman, Harvey

    2012-01-01

    The purpose of the present study was to explore the phonological working memory of adults who stutter through the use of a non-word repetition and a phoneme elision task. Participants were 14 adults who stutter (M = 28 years) and 14 age/gender matched adults who do not stutter (M = 28 years). For the non-word repetition task, the participants had…

  3. The Function of Repeating: The Relation between Word Class and Repetition Type in Developmental Stuttering

    Science.gov (United States)

    Buhr, Anthony P.; Jones, Robin M.; Conture, Edward G.; Kelly, Ellen M.

    2016-01-01

    Background: It is already known that preschool-age children who stutter (CWS) tend to stutter on function words at the beginning of sentences. It is also known that phonological errors potentially resulting in part-word repetitions tend to occur on content words. However, the precise relation between word class and repetition type in preschool-age…

  4. On the Road to Science Literacy: Building Confidence and Competency in Technical Language through Choral Repetition

    Science.gov (United States)

    Hohenshell, Liesl M.; Woller, Michael J.; Sherlock, Wallace

    2013-01-01

    In order to be successful, students must acquire the language of science for both oral and written communication. In this article we examine an oral language learning technique called choral repetition for its role in building literacy in the context of an animal physiology course. For 3 weeks, the instructor conducted choral repetitions of nine…

  5. Functional dissociations in top-down control dependent neural repetition priming.

    NARCIS (Netherlands)

    Klaver, P.; Schnaidt, M.; Fell, J.; Ruhlmann, J.; Elger, C.E.; Fernandez, G.

    2007-01-01

    Little is known about the neural mechanisms underlying top-down control of repetition priming. Here, we use functional brain imaging to investigate these mechanisms. Study and repetition tasks used a natural/man-made forced choice task. In the study phase subjects were required to respond to either

  6. Task Repetition Effects on L1 Use in EFL Child Task-Based Interaction

    Science.gov (United States)

    Azkarai, Agurtzane; García Mayo, María del Pilar

    2017-01-01

    Research has shown that tasks provide second language (L2) learners with many opportunities to learn the L2. Task repetition has been claimed to benefit L2 learning since familiarity with procedure and/or content gives learners the chance to focus on more specific aspects of language. Most research on task repetition has focused on adult…

  7. Repetition suppression and expectation suppression are dissociable in time in early auditory evoked fields.

    Science.gov (United States)

    Todorovic, Ana; de Lange, Floris P

    2012-09-26

    Repetition of a stimulus, as well as valid expectation that a stimulus will occur, both attenuate the neural response to it. These effects, repetition suppression and expectation suppression, are typically confounded in paradigms in which the nonrepeated stimulus is also relatively rare (e.g., in oddball blocks of mismatch negativity paradigms, or in repetition suppression paradigms with multiple repetitions before an alternation). However, recent hierarchical models of sensory processing inspire the hypothesis that the two might be separable in time, with repetition suppression occurring earlier, as a consequence of local transition probabilities, and suppression by expectation occurring later, as a consequence of learnt statistical regularities. Here we test this hypothesis in an auditory experiment by orthogonally manipulating stimulus repetition and stimulus expectation and, using magnetoencephalography, measuring the neural response over time in human subjects. We found that stimulus repetition (but not stimulus expectation) attenuates the early auditory response (40-60 ms), while stimulus expectation (but not stimulus repetition) attenuates the subsequent, intermediate stage of auditory processing (100-200 ms). These findings are well in line with hierarchical predictive coding models, which posit sequential stages of prediction error resolution, contingent on the level at which the hypothesis is generated.

  8. Subcategories of Restricted and Repetitive Behaviors in Children with Autism Spectrum Disorders

    Science.gov (United States)

    Bishop, Somer L.; Hus, Vanessa; Duncan, Amie; Huerta, Marisela; Gotham, Katherine; Pickles, Andrew; Kreiger, Abba; Buja, Andreas; Lund, Sabata; Lord, Catherine

    2013-01-01

    Research suggests that restricted and repetitive behaviors (RRBs) can be subdivided into Repetitive Sensory Motor (RSM) and Insistence on Sameness (IS) behaviors. However, because the majority of previous studies have used the Autism Diagnostic Interview-Revised (ADI-R), it is not clear whether these subcategories reflect the actual organization…

  9. Measuring Repetitive Behaviors as a Treatment Endpoint in Youth with Autism Spectrum Disorder

    Science.gov (United States)

    Scahill, Lawrence; Aman, Michael G.; Lecavalier, Luc; Halladay, Alycia K.; Bishop, Somer L.; Bodfish, James W.; Grondhuis, Sabrina; Jones, Nancy; Horrigan, Joseph P.; Cook, Edwin H.; Handen, Benjamin L.; King, Bryan H.; Pearson, Deborah A.; McCracken, James T.; Sullivan, Katherine Anne; Dawson, Geraldine

    2015-01-01

    Restricted interests and repetitive behaviors vary widely in type, frequency, and intensity among children and adolescents with autism spectrum disorder. They can be stigmatizing and interfere with more constructive activities. Accordingly, restricted interests and repetitive behaviors may be a target of intervention. Several standardized…

  10. Brief Report: Repetitive Behaviours in Greek Individuals with Autism Spectrum Disorder

    Science.gov (United States)

    Georgiades, Stelios; Papageorgiou, Vaya; Anagnostou, Evdokia

    2010-01-01

    The main objective of this study was to examine the factor structure of restricted repetitive behaviours (RRBs) in a sample of 205 Greek individuals with Autism Spectrum Disorder (ASD), using the Repetitive Behavior Scale-Revised (RBS-R). Results show that the structure of RRBs in this Greek sample can be described using a 2-factor solution. The…

  11. The Repetitive Behavior Scale-Revised: Independent Validation in Individuals with Autism Spectrum Disorders

    Science.gov (United States)

    Lam, Kristen S. L.; Aman, Michael G.

    2007-01-01

    A key feature of autism is restricted repetitive behavior (RRB). Despite the significance of RRBs, little is known about their phenomenology, assessment, and treatment. The Repetitive Behavior Scale-Revised (RBS-R) is a recently-developed questionnaire that captures the breadth of RRB in autism. To validate the RBS-R in an independent sample, we…

  12. Motor Control and Nonword Repetition in Specific Working Memory Impairment and SLI

    Science.gov (United States)

    Archibald, Lisa M. D.; Joanisse, Marc F.; Munson, Benjamin

    2013-01-01

    Purpose: Debate around the underlying cognitive factors leading to poor performance in the repetition of nonwords by children with developmental impairments in language has centered around phonological short-term memory, lexical knowledge, and other factors. This study examines the impact of motor control demands on nonword repetition in groups of…

  13. Repetition rate continuously tunable 10-GHz picosecond mode-locked fiber ring laser

    Institute of Scientific and Technical Information of China (English)

    Fang Wan; Ziyu Wang

    2006-01-01

    A couple of simple-structure phase modulators were used in active mode-locked fiber laser to implement repetition rate continuous tuning. The laser produces pulse as short as 5.7 ps whose repetition rate tuning can cover the spacing of the adjoining order mode-locking frequencies.

  14. Molecular characterization and physical localization of highly repetitive DNA sequences from Brazilian Alstroemeria species

    NARCIS (Netherlands)

    Kuipers, A.G.J.; Kamstra, S.A.; Jeu, de M.J.; Jacobsen, E.

    2002-01-01

    Highly repetitive DNA sequences were isolated from genomic DNA libraries of Alstroemeria psittacina and A. inodora. Among the repetitive sequences that were isolated, tandem repeats as well as dispersed repeats could be discerned. The tandem repeats belonged to a family of interlinked Sau3A subfragm

  15. Frequency Adaptive Repetitive Control of Grid-Tied Three-Phase PV Inverters

    DEFF Research Database (Denmark)

    Zhou, Keliang; Yang, Yongheng; Blaabjerg, Frede

    2016-01-01

    Repetitive control offers an accurate current control scheme for grid-tied converters to feed high quality sinusoidal current into the grid. However, with grid frequency being treated as a constant value, conventional repetitive controller fail to produce high quality feeding current...

  16. Motor Control and Nonword Repetition in Specific Working Memory Impairment and SLI

    Science.gov (United States)

    Archibald, Lisa M. D.; Joanisse, Marc F.; Munson, Benjamin

    2013-01-01

    Purpose: Debate around the underlying cognitive factors leading to poor performance in the repetition of nonwords by children with developmental impairments in language has centered around phonological short-term memory, lexical knowledge, and other factors. This study examines the impact of motor control demands on nonword repetition in groups of…

  17. Topic Repetitiveness after Traumatic Brain Injury: An Emergent, Jointly Managed Behaviour

    Science.gov (United States)

    Body, Richard; Parker, Mark

    2005-01-01

    Topic repetitiveness is a common component of pragmatic impairment and a powerful contributor to social exclusion. Despite this, description, characterization and intervention remain underdeveloped. This article explores the nature of repetitiveness in traumatic brain injury (TBI). A case study of one individual after TBI provides the basis for a…

  18. Changes of the Prefrontal EEG (Electroencephalogram) Activities According to the Repetition of Audio-Visual Learning.

    Science.gov (United States)

    Kim, Yong-Jin; Chang, Nam-Kee

    2001-01-01

    Investigates the changes of neuronal response according to a four time repetition of audio-visual learning. Obtains EEG data from the prefrontal (Fp1, Fp2) lobe from 20 subjects at the 8th grade level. Concludes that the habituation of neuronal response shows up in repetitive audio-visual learning and brain hemisphericity can be changed by…

  19. On the Road to Science Literacy: Building Confidence and Competency in Technical Language through Choral Repetition

    Science.gov (United States)

    Hohenshell, Liesl M.; Woller, Michael J.; Sherlock, Wallace

    2013-01-01

    In order to be successful, students must acquire the language of science for both oral and written communication. In this article we examine an oral language learning technique called choral repetition for its role in building literacy in the context of an animal physiology course. For 3 weeks, the instructor conducted choral repetitions of nine…

  20. The use of digit and sentence repetition in the identification of ...

    African Journals Online (AJOL)

    Kate H

    be more sensitive than others for the difference between the performance of the ... assessment instruments, screening tools that employ repetition tasks can be ... Whilst “specific language impairment” is widely used in academic or ... Digit repetition requires a person to repeat in the correct order a series of digits presented.